Turbine stator vane segment having internal cooling circuits

DOEpatents

Jones, Raymond Joseph; Burns, James Lee; Bojappa, Parvangada Ganapathy; Jones, Schotsch Margaret

2003-01-01

A turbine stator vane includes outer and inner walls each having outer and inner chambers and a vane extending between the outer and inner walls. The vane includes first, second, third, fourth and fifth cavities for flowing a cooling medium. The cooling medium enters the outer chamber of the outer wall, flows through an impingement plate for impingement cooling of the outer band wall defining in part the hot gas path and through openings in the first, second and fourth cavities for flow radially inwardly, cooling the vane. The spent cooling medium flows into the inner wall and inner chamber for flow through an impingement plate radially outwardly to cool the inner wall. The spent cooling medium flows through the third cavity for egress from the turbine vane segment from the outer wall. The first, second or third cavities contain inserts having impingement openings for impingement cooling of the vane walls. The fifth cavity provides air cooling for the trailing edge.

New polyenic antibiotics active against gram-positive and gram-negative bacteria. VIII. Construction of synthetic medium for production of mono-chloro-congeners of enacyloxins.

PubMed

Watanabe, T; Sugiyama, T; Chino, K; Suzuki, T; Wakabayashi, S; Hayashi, H; Itami, R; Shima, J; Izaki, K

1992-04-01

New antibiotics enacyloxins (ENXs) are a family of non-lactonic polyene antibiotics produced by Frateuria sp. W-315. For the production of antibiotics, we had to employ two-step fermentations, the first is the production of spent medium of Neurospora crassa and the second is the production of antibiotics by Frateuria. To simplify the production of antibiotics, systematic analyses have been done on the spent medium, and factors which affect the production of antibiotics characterized. From the above results, we constructed a new medium for antibiotic production. Moreover, we could get a new antibiotic named enacyloxin IIIa (1), C33H48O11NCl (m/z 669). 1 was deduced to be one of the congeners of enacyloxins because it was similar to ENX IIa or ENX IVa both in biological and physico-chemical properties. Chlorine of 1 could be replaced by bromine, biosynthetically, and the resultant bromine-containing antibiotic also showed an antibacterial activity comparable to 1.

Mitochondrial DNA content in embryo culture medium is significantly associated with human embryo fragmentation.

PubMed

Stigliani, S; Anserini, P; Venturini, P L; Scaruffi, P

2013-10-01

Is the amount of cell-free DNA released by human embryos into culture medium correlated with embryo morphological features? The mitochondrial DNA (mtDNA) content of culture medium is significantly associated with the fragmentation rate on Days 2 and 3 of embryo development, whether the oocyte came from women ≤ 35 or >35 years old. Cellular fragmentation is often utilized as one of the morphological parameters for embryo quality assessment. The amount of cellular fragments is considered to be an important morphological parameter for embryo implantation potential. It has been hypothesized that fragments are apoptotic bodies or anuclear cytoplasmatic pieces of blastomeres, although no definitive conclusion has been drawn about their pathogenesis. Human fertilized oocytes were individually cultured from Day 1 to Days 2 and 3. A total of 800 samples (166 spent media from Day 2 and 634 from Day 3) were enrolled into the present study. Double-stranded DNA (dsDNA) was quantified in 800 spent embryo culture media by Pico Green dye fluorescence assay. After DNA purification, genomic DNA (gDNA) and mtDNA were profiled by specific quantitative PCR. Statistical analyses defined correlations among DNA contents, embryo morphology and maternal age. Different independent tests confirmed the presence of DNA into embryo culture medium and, for the first time, we demonstrate that both gDNA and mtDNA are detectable in the secretome. The amount of DNA is larger in embryos with bad quality cleavage compared with high-grade embryos, suggesting that the DNA profile of culture medium is an objective marker for embryo quality assessment. In particular, DNA profiles are significantly associated with fragmentation feature (total dsDNA: P = 0.0010; mtDNA; P = 0.0247) and advanced maternal age. It is necessary to establish whether DNA profiling of spent embryo culture medium is a robust onsite test that can improve the prediction of blastulation, implantation and/or pregnancy rate. The approach we are proposing may provide a novel, non-invasive, objective tool for embryo quality grading. The correlation between a high mtDNA concentration and the fragmentation rate of embryos is suggestive that fragments are mainly anuclear cytoplasmatic debris arising during cleavage. Therefore, blastomere shaping as an early event during in vitro development may play a homeostatic role and be related to embryo competence. This project was funded by Merck Serono (Grant for Fertility Innovation 2011). The sponsor had no role in study design, data collection, data analysis, data interpretation and writing of the paper. Authors declare no conflicts of interest. ClinicalTrials.gov Identifier: NCT01397136.

Origin and composition of cell-free DNA in spent medium from human embryo culture during preimplantation development.

PubMed

Vera-Rodriguez, M; Diez-Juan, A; Jimenez-Almazan, J; Martinez, S; Navarro, R; Peinado, V; Mercader, A; Meseguer, M; Blesa, D; Moreno, I; Valbuena, D; Rubio, C; Simon, C

2018-04-01

What is the origin and composition of cell-free DNA in human embryo spent culture media? Cell-free DNA from human embryo spent culture media represents a mix of maternal and embryonic DNA, and the mixture can be more complex for mosaic embryos. In 2016, ~300 000 human embryos were chromosomally and/or genetically analyzed using preimplantation genetic testing for aneuploidies (PGT-A) or monogenic disorders (PGT-M) before transfer into the uterus. While progress in genetic techniques has enabled analysis of the full karyotype in a single cell with high sensitivity and specificity, these approaches still require an embryo biopsy. Thus, non-invasive techniques are sought as an alternative. This study was based on a total of 113 human embryos undergoing trophectoderm biopsy as part of PGT-A analysis. For each embryo, the spent culture media used between Day 3 and Day 5 of development were collected for cell-free DNA analysis. In addition to the 113 spent culture media samples, 28 media drops without embryo contact were cultured in parallel under the same conditions to use as controls. In total, 141 media samples were collected and divided into two groups: one for direct DNA quantification (53 spent culture media and 17 controls), the other for whole-genome amplification (60 spent culture media and 11 controls) and subsequent quantification. Some samples with amplified DNA (N = 56) were used for aneuploidy testing by next-generation sequencing; of those, 35 samples underwent single-nucleotide polymorphism (SNP) sequencing to detect maternal contamination. Finally, from the 35 spent culture media analyzed by SNP sequencing, 12 whole blastocysts were analyzed by fluorescence in situ hybridization (FISH) to determine the level of mosaicism in each embryo, as a possible origin for discordance between sample types. Trophectoderm biopsies and culture media samples (20 μl) underwent whole-genome amplification, then libraries were generated and sequenced for an aneuploidy study. For SNP sequencing, triads including trophectoderm DNA, cell-free DNA, and follicular fluid DNA were analyzed. In total, 124 SNPs were included with 90 SNPs distributed among all autosomes and 34 SNPs located on chromosome Y. Finally, 12 whole blastocysts were fixed and individual cells were analyzed by FISH using telomeric/centromeric probes for the affected chromosomes. We found a higher quantity of cell-free DNA in spent culture media co-cultured with embryos versus control media samples (P ≤ 0.001). The presence of cell-free DNA in the spent culture media enabled a chromosomal diagnosis, although results differed from those of trophectoderm biopsy analysis in most cases (67%). Discordant results were mainly attributable to a high percentage of maternal DNA in the spent culture media, with a median percentage of embryonic DNA estimated at 8%. Finally, from the discordant cases, 91.7% of whole blastocysts analyzed by FISH were mosaic and 75% of the analyzed chromosomes were concordant with the trophectoderm DNA diagnosis instead of the cell-free DNA result. This study was limited by the sample size and the number of cells analyzed by FISH. This is the first study to combine chromosomal analysis of cell-free DNA, SNP sequencing to identify maternal contamination, and whole-blastocyst analysis for detecting mosaicism. Our results provide a better understanding of the origin of cell-free DNA in spent culture media, offering an important step toward developing future non-invasive karyotyping that must rely on the specific identification of DNA released from human embryos. This work was funded by Igenomix S.L. There are no competing interests.

The effect of food environments on fruit and vegetable intake as modified by time spent at home: a cross-sectional study.

PubMed

Chum, Antony; Farrell, Eddie; Vaivada, Tyler; Labetski, Anna; Bohnert, Arianne; Selvaratnam, Inthuja; Larsen, Kristian; Pinter, Theresa; O'Campo, Patricia

2015-06-04

There is a growing body of research that investigates how the residential neighbourhood context relates to individual diet. However, previous studies ignore participants' time spent in the residential environment and this may be a problem because time-use studies show that adults' time-use pattern can significantly vary. To better understand the role of exposure duration, we designed a study to examine 'time spent at home' as a moderator to the residential food environment-diet association. Cross-sectional observational study. City of Toronto, Ontario, Canada. 2411 adults aged 25-65. Frequency of vegetable and fruit intake (VFI) per day. To examine how time spent at home may moderate the relationship between residential food environment and VFI, the full sample was split into three equal subgroups--short, medium and long duration spent at home. We detected significant associations between density of food stores in the residential food environment and VFI for subgroups that spend medium and long durations at home (ie, spending a mean of 8.0 and 12.3 h at home, respectively--not including sleep time), but no associations exist for people who spend the lowest amount of time at home (mean=4.7 h). Also, no associations were detected in analyses using the full sample. Our study is the first to demonstrate that time spent at home may be an important variable to identify hidden population patterns regarding VFI. Time spent at home can impact the association between the residential food environment and individual VFI. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

The effect of food environments on fruit and vegetable intake as modified by time spent at home: a cross-sectional study

PubMed Central

Chum, Antony; Farrell, Eddie; Vaivada, Tyler; Labetski, Anna; Selvaratnam, Inthuja; Larsen, Kristian; Pinter, Theresa; O'Campo, Patricia

2015-01-01

Objective There is a growing body of research that investigates how the residential neighbourhood context relates to individual diet. However, previous studies ignore participants’ time spent in the residential environment and this may be a problem because time-use studies show that adults’ time-use pattern can significantly vary. To better understand the role of exposure duration, we designed a study to examine ‘time spent at home’ as a moderator to the residential food environment-diet association. Design Cross-sectional observational study. Settings City of Toronto, Ontario, Canada. Participants 2411 adults aged 25–65. Primary outcome measure Frequency of vegetable and fruit intake (VFI) per day. Results To examine how time spent at home may moderate the relationship between residential food environment and VFI, the full sample was split into three equal subgroups—short, medium and long duration spent at home. We detected significant associations between density of food stores in the residential food environment and VFI for subgroups that spend medium and long durations at home (ie, spending a mean of 8.0 and 12.3 h at home, respectively—not including sleep time), but no associations exist for people who spend the lowest amount of time at home (mean=4.7 h). Also, no associations were detected in analyses using the full sample. Conclusions Our study is the first to demonstrate that time spent at home may be an important variable to identify hidden population patterns regarding VFI. Time spent at home can impact the association between the residential food environment and individual VFI. PMID:26044756

Bioconversion of lignocellulosic residues by Agrocybe cylindracea and Pleurotus ostreatus mushroom fungi--assessment of their effect on the final product and spent substrate properties.

PubMed

Koutrotsios, Georgios; Mountzouris, Konstantinos C; Chatzipavlidis, Iordanis; Zervakis, Georgios I

2014-10-15

Nine agro-industrial and forestry by-products were subjected to solid-state fermentation by Agrocybe cylindracea and Pleurotus ostreatus, and the process and end-products were comparatively evaluated. Grape marc waste plus cotton gin trash was the best performing medium for both fungi, while substrate composition had a marked effect on most cultivation parameters. Biological efficiency was positively correlated with nitrogen, lignin and ash, and negatively with hemicelluloses and carbohydrate content of substrates. Spent substrates demonstrated high reductions in hemicelluloses and cellulose in contrast to lignin; fibre fractions were correlated with nitrogen, fat and ash content of initial materials, while residual mycelial biomass was affected by mushroom productivity. Mushroom proximate analysis revealed significant variations of constituents depending on the substrate. Crude protein and fat were correlated with substrates nitrogen for both species. Alternative cultivation substrates of high potential are proposed, while spent material could be exploited as animal feed due to its upgraded properties. Copyright © 2014 Elsevier Ltd. All rights reserved.

Aggressive and foraging behavioral interactions among ruffe

USGS Publications Warehouse

Savino, Jacqueline F.; Kostich, Melissa J.

2000-01-01

The ruffe, Gymnocephalus cernuus, is a nonindigenous percid in the Great Lakes. Ruffe are aggressive benthivores and forage over soft substrates. Laboratory studies in pools (100 cm in diameter, 15 cm water depth) were conducted to determine whether fish density (low = 2, medium = 4, high = 6 ruffe per pool) changed foraging and aggressive behaviors with a limited food supply of chironomid larvae. All fish densities demonstrated a hierarchy based on aggressive interactions, but ruffe were most aggressive at low and high fish densities. Time spent in foraging was lowest at the low fish density. The best forager at the low fish density was the most aggressive individual, but the second most aggressive fish at the medium and high fish density was the best forager and also the one chased most frequently. A medium fish density offered the best energetic benefits to ruffe by providing the lowest ratio of time spent in aggression to that spent foraging. Based on our results, ruffe should grow best at an intermediate density. With high ruffe densities, we would also expect disparity in size as the more aggressive fish are able to garner a disproportionate amount of the resources. Alternatively, as the Great Lakes are a fairly open system, ruffe could migrate out of one area to colonize another as populations exceed optimal densities.

Characterizing nuclear and mitochondrial DNA in spent embryo culture media: genetic contamination identified.

PubMed

Hammond, Elizabeth R; McGillivray, Brent C; Wicker, Sophie M; Peek, John C; Shelling, Andrew N; Stone, Peter; Chamley, Larry W; Cree, Lynsey M

2017-01-01

To characterize nuclear and mitochondrial DNA (mtDNA) in spent culture media from normally developing blastocysts to determine whether it could be used for noninvasive genetic assessment. Prospective embryo cohort study. Academic center and private in vitro fertilization (IVF) clinic. Seventy patients undergoing intracytoplasmic sperm injection (ICSI) and 227 blastocysts. Culture media assessment, artificial blastocoele fluid collapse and DNA analysis using digital polymerase chain reaction (dPCR), long-range PCR, quantitative PCR (qPCR), and DNA fingerprinting. Presence of nuclear and mtDNA in three different commercial culture media from Vitrolife and Irvine Scientific, spent embryo media assessment at the cleavage and blastocyst stages of development, and analysis of the internal media controls for each patient that had been exposed to identical conditions as embryo media but did not come into contact with embryos. Higher levels of nuclear and mtDNA were observed in the culture media that had been exposed to embryos compared with the internal media controls. Nuclear DNA (∼4 copies) and mtDNA (∼600 copies) could be detected in spent media, and the levels increased at the blastocyst stage. No increase in DNA was detected after artificial blastocoele fluid collapse. Mixed sex chromosome DNA was detected. This originated from contamination in the culture media and from maternal (cumulus) cells. Due to the limited amount of template, the presence of embryonic nuclear DNA could not be confirmed by DNA fingerprinting analysis. Currently DNA from culture media cannot be used for genetic assessment because embryo-associated structures release DNA into the culture medium and the DNA is of mixed origin. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Dormant Cells of Staphylococcus aureus Are Resuscitated by Spent Culture Supernatant

PubMed Central

Pascoe, Ben; Dams, Lucy; Wilkinson, Tom S.; Harris, Llinos G.; Bodger, Owen; Mack, Dietrich; Davies, Angharad P.

2014-01-01

We describe the first in vitro model of dormancy in Staphylococcus aureus, showing that cells are generated which can be resuscitated by addition of spent medium supernatant taken from cultures of the same organism. Over 30 days, culturable counts in dormant cultures of S. aureus SH1000 fell from 106–107 cfu/ml to <10 cfu/ml as measured by the Most Probable Number method in liquid culture, while total counts as determined by microscopy, and supported by data from RT-qPCR, remained around 106–107 cells/ml. Supplementing cultures with 25–50% spent medium resulted in a >600-fold increase in bacterial growth. Resuscitation was a specific effect, greatly reduced by boiling or addition of trypsin to the spent supernatant. Supernatant also effected a reduction in lag phase of dormant cultures. SEM demonstrated the presence of small coccoid cells in dormant cultures. The results are similar to those seen with resuscitation promoting factors (Rpfs) in actinobacteria. This is the first time resuscitation has been demonstrated in Staphylococcus aureus, which is an important human pathogen. A better understanding of control and reactivation of dormant cells could lead to major improvements in managing staphylococcal infections; resuscitation could be an important step in restoring susceptibility to antibiotic treatment. PMID:24523858

Microbiological characterization of a regenerative life support system

NASA Technical Reports Server (NTRS)

Koenig, D. W.; Bruce, R. J.; Mishra, S. K.; Barta, D. J.; Pierson, D. L.

1994-01-01

A Variable Pressure Plant Growth Chamber (VPGC), at the Johnson Space Center's (JSC) ground based Regenerative Life Support Systems (RLSS) test bed, was used to produce crops of soil-grown lettuce. The crops and chamber were analyzed for microbiological diversity during lettuce growth and after harvest. Bacterial counts for the rhizosphere, spent nutrient medium, heat exchanger condensate, and atmosphere were approximately 10(exp 11) Colony Forming Units (CFU)/g, 10(exp 5) CFU/ml, 10(exp 5)CFU/ml, and 600 CFU/m sq, repectively. Pseudomonas was the predominant bacterial genus. Numbers of fungi were about 10(exp 5) CFU/g in the rhizosphere, 4-200 CFU/ml in the spent nutient medium, 110 CFU/ml in the heat exchanger condensate, and 3 CFU/cu m in the atmosphere. Fusarium and Trichoderma were the predominant fungal genera.

Trichomonas vaginalis: identification of soluble and membrane-associated phospholipase A1 and A2 activities with direct and indirect hemolytic effects.

PubMed

Vargas-Villarreal, Javier; Mata-Cárdenas, Benito David; Palacios-Corona, Rebeca; González-Salazar, Francisco; Cortes-Gutierrez, Elva I; Martínez-Rodríguez, Herminia G; Said-Fernández, Salvador

2005-02-01

A direct hemolytic activity, dependent on phospholipase A (PLA) activity, was located in the particulate subcellular fraction (P30) of Trichomonas vaginalis. We identified soluble direct and indirect hemolytic activities in the spent medium and soluble fraction (S30) of T. vaginalis strain GT-13. Spent medium showed the highest specific indirect hemolytic activity (SIHA) at pH 6.0 (91 indirect hemolytic units [HU]/mg/hr). Spent medium and P30, but not S30, showed direct hemolytic activity. PLA activity was protein dose dependent and time dependent. The highest PLA activity was observed at pH 6.0. All trichomonad preparations showed phospholipase A1 (PLA A1) and phospholipase A2 (PLA A2) activities. Indirect and direct hemolytic activity and PLA A1 and PLA A2 diminished at pH 6.0 and 8.0 with increasing concentrations of Rosenthal's inhibitor. The greatest effect was observed with 80 microM at pH 6.0 on the SIHA of S30 (83% reduction) and the lowest at pH 8.0, also on the SIHA of S30 (26% reduction). In conclusion, T. vaginalis contains particulate and soluble acidic, and alkaline direct and indirect hemolytic activities, which are partially dependent on alkaline or acidic PLA A1 and PLA A2 enzymes. These could be responsible for the contact-dependent and -independent hemolytic and cytolytic activities of T. vaginalis.

Use of spent mushroom substrate for production of Bacillus thuringiensis by solid-state fermentation.

PubMed

Wu, Songqing; Lan, Yanjiao; Huang, Dongmei; Peng, Yan; Huang, Zhipeng; Xu, Lei; Gelbic, Ivan; Carballar-Lejarazu, Rebeca; Guan, Xiong; Zhang, Lingling; Zou, Shuangquan

2014-02-01

The aim of this study was to explore a cost-effective method for the mass production of Bacillus thuringiensis (Bt) by solid-state fermentation. As a locally available agroindustrial byproduct, spent mushroom substrate (SMS) was used as raw material for Bt cultivation, and four combinations of SMS-based media were designed. Fermentation conditions were optimized on the best medium and the optimal conditions were determined as follows: temperature 32 degrees C, initial pH value 6, moisture content 50%, the ratio of sieved material to initial material 1:3, and inoculum volume 0.5 ml. Large scale production of B. thuringiensis subsp. israelensis (Bti) LLP29 was conducted on the optimal medium at optimal conditions. High toxicity (1,487 international toxic units/milligram) and long larvicidal persistence of the product were observed in the study, which illustrated that SMS-based solid-state fermentation medium was efficient and economical for large scale industrial production of Bt-based biopesticides. The cost of production of 1 kg of Bt was approximately US$0.075.

Spent mushroom substrate biochar as a potential amendment in pig manure and rice straw composting processes.

PubMed

Chang, Ken-Lin; Chen, Xi-Mei; Sun, Jian; Liu, Jing-Yong; Sun, Shui-Yu; Yang, Zuo-Yi; Wang, Yin

2017-07-01

Spent mushroom substrate (SMS) is a bulky waste byproduct of commercial mushroom production, which can cause serious environmental problems and, therefore, poses a significant barrier to future expansion of the mushroom industry. In the present study, we explored the use of SMS as a biochar to improve the quality of bio-fertilizer. Specifically, we performed a series of experiments using composting reactors to investigate the effects of SMS biochar on the physio-chemical properties of bio-fertilizer. Biochar was derived from dry SMS pyrolysed at 500°C and mixed with pig manure and rice straw. Results from this study demonstrate that the addition of biochar significantly reduced electrical conductivity and loss of organic matter in compost material. Nutrient analysis revealed that the SMS-derived biochar is rich in fertilizer nutrients such as P, K, Na, and N. All of these findings suggest that SMS biochar could be an excellent medium for compost.

Corrosion behavior of Alloy 690 and Alloy 693 in simulated nuclear high level waste medium

NASA Astrophysics Data System (ADS)

Samantaroy, Pradeep Kumar; Suresh, Girija; Paul, Ranita; Kamachi Mudali, U.; Raj, Baldev

2011-11-01

Nickel based alloys are candidate materials for the storage of high level waste (HLW) generated from reprocessing of spent nuclear fuel. In the present investigation Alloy 690 and Alloy 693 are assessed by potentiodynamic anodic polarization technique for their corrosion behavior in 3 M HNO 3, 3 M HNO 3 containing simulated HLW and in chloride medium. Both the alloys were found to possess good corrosion resistance in both the media at ambient condition. Microstructural examination was carried out by SEM for both the alloys after electrolytic etching. Compositional analysis of the passive film formed on the alloys in 3 M HNO 3 and 3 M HNO 3 with HLW was carried out by XPS. The surface of Alloy 690 and Alloy 693, both consists of a thin layer of oxide of Ni, Cr, and Fe under passivation in both the media. The results of investigation are presented in the paper.

Cellulase production from spent sulfite liquor and paper-mill waste fiber

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qu Yinbo; Zhao Xin; Gao Peiji

1991-12-31

Since a high proportion of the overall cost of the conversion of cellulosics to useful products is the expense of cellulose production (1), it is desirable to develop new processes for producing large amounts of cellulase inexpensively. So far, most of the research work on cellulose production has been carried out using milled cellulose powder and inorganic salts as substrates, which significantly increases the cost of enzyme production. In order to reduce the cost of raw materials, we tried to develop from industrial wastes a new medium for the production of cellulose. In this report, we describe a simple methodmore » by which an all-waste medium, which was composed of spent ammonium sulfite liquor and cellulosic waste of a paper mill, and a catabolite derepression mutant of Penicillium decumbens were used to produce the enzyme efficiently.« less

Axial thermal medium delivery tubes and retention plates for a gas turbine rotor

DOEpatents

Mashey, Thomas Charles

2002-01-01

In a multi-stage turbine rotor, tubes are disposed in openings adjacent the rotor rim for flowing a thermal medium to rotor buckets and returning spent thermal medium. The tubes have axially spaced lands of predetermined wall thickness with thin-walled tube sections between the lands and of increasing thickness from the forward to the aft ends of the tubes. A pair of retention plates are carried on the aft end face of the aft wheel and straddle the tube and engage against a shoulder on the tube to preclude displacement of the tube in an aft direction.

Brewer's spent grain as raw material for lactic acid production by Lactobacillus delbrueckii.

PubMed

Mussatto, Solange I; Fernandes, Marcela; Dragone, Giuliano; Mancilha, Ismael M; Roberto, Inês C

2007-12-01

Chemically pre-treated brewer's spent grain was saccharified with cellulase producing a hydrolysate with approx. 50 g glucose l(-1). This hydrolysate was used as a fermentation medium without any nutrient supplementation by Lactobacillus delbrueckii, which produced L-lactic acid (5.4 g l(-1)) at 0.73 g g(-1) glucose consumed (73% efficiency). An inoculum of 1 g dry cells l(-1) gave the best yield of the process, but the pH decrease affected the microorganism capacity to consume glucose and convert it into lactic acid.

Microvolume trace environmental analysis using peak-focusing online solid-phase extraction-nano-liquid chromatography-high-resolution mass spectrometry.

PubMed

Stravs, Michael A; Mechelke, Jonas; Ferguson, P Lee; Singer, Heinz; Hollender, Juliane

2016-03-01

Online solid-phase extraction was combined with nano-liquid chromatography coupled to high-resolution mass spectrometry (HRMS) for the analysis of micropollutants in environmental samples from small volumes. The method was validated in surface water, Microcystis aeruginosa cell lysate, and spent Microcystis growth medium. For 41 analytes, quantification limits of 0.1-28 ng/L (surface water) and 0.1-32 ng/L (growth medium) were obtained from only 88 μL of sample. In cell lysate, quantification limits ranged from 0.1-143 ng/L or 0.33-476 ng/g dry weight from a sample of 88 μL, or 26 μg dry weight, respectively. The method matches the sensitivity of established online and offline solid-phase extraction-liquid chromatography-mass spectrometry methods but requires only a fraction of the sample used by those techniques, and is among the first applications of nano-LC-MS for environmental analysis. The method was applied to the determination of bioconcentration in Microcystis aeruginosa in a laboratory experiment, and the benefit of coupling to HRMS was demonstrated in a transformation product screening.

Method for storing nuclear fuel in respositories

DOEpatents

Schweitzer, D.G.; Sastre, C.

A method for storing radioactive spent fuel in repositories containing polyphenyl or silicon oil as the storage medium is disclosed. Polyphenyls and silicon oils are non-corrosive and are not subject to radiation damage. Thus, storage periods of up to 100 years are possible.

Lactobacillus salivarius 1077 (NRRL B-50053) bacteriocin

USDA-ARS?s Scientific Manuscript database

Lactobacillus salivarius 1077 (NRRL B-50053) was isolated from poultry intestinal materials after demonstrating in-vitro anti-Campylobacter jejuni activity. The isolate was then used for in-vitro fermentation. The protein content of the cell-free supernatant from the spent medium was precipitated ...

Production, Purification, and Characterization of a Major Penicillium glabrum Xylanase Using Brewer's Spent Grain as Substrate

PubMed Central

Beitel, Susan Michelz; Fortkamp, Diana; Terrasan, César Rafael Fanchini; de Almeida, Alex Fernando

2013-01-01

In recent decades, xylanases have been used in many processing industries. This study describes the xylanase production by Penicillium glabrum using brewer's spent grain as substrate. Additionally, this is the first work that reports the purification and characterization of a xylanase using this agroindustrial waste. Optimal production was obtained when P. glabrum was grown in liquid medium in pH 5.5, at 25 °C, under stationary condition for six days. The xylanase from P. glabrum was purified to homogeneity by a rapid and inexpensive procedure, using ammonium sulfate fractionation and molecular exclusion chromatography. SDS-PAGE analysis revealed one band with estimated molecular mass of 18.36 kDa. The optimum activity was observed at 60 °C, in pH 3.0. The enzyme was very stable at 50 °C, and high pH stability was verified from pH 2.5 to 5.0. The ion Mn2+ and the reducing agents β-mercaptoethanol and DTT enhanced xylanase activity, while the ions Hg2+, Zn2+, and Cu2+ as well as the detergent SDS were strong inhibitors of the enzyme. The use of brewer's spent grain as substrate for xylanase production cannot only add value and decrease the amount of this waste but also reduce the xylanase production cost. PMID:23762855

Production of bacterial cellulose and enzyme from waste fiber sludge

PubMed Central

2013-01-01

Background Bacterial cellulose (BC) is a highly crystalline and mechanically stable nanopolymer, which has excellent potential as a material in many novel applications, especially if it can be produced in large amounts from an inexpensive feedstock. Waste fiber sludge, a residue with little or no value, originates from pulp mills and lignocellulosic biorefineries. A high cellulose and low lignin content contributes to making the fiber sludge suitable for bioconversion, even without a thermochemical pretreatment step. In this study, the possibility to combine production of BC and hydrolytic enzymes from fiber sludge was investigated. The BC was characterized using field-emission scanning electron microscopy and X-ray diffraction analysis, and its mechanical properties were investigated. Results Bacterial cellulose and enzymes were produced through sequential fermentations with the bacterium Gluconacetobacter xylinus and the filamentous fungus Trichoderma reesei. Fiber sludges from sulfate (SAFS) and sulfite (SIFS) processes were hydrolyzed enzymatically without prior thermochemical pretreatment and the resulting hydrolysates were used for BC production. The highest volumetric yields of BC from SAFS and SIFS were 11 and 10 g/L (DW), respectively. The BC yield on initial sugar in hydrolysate-based medium reached 0.3 g/g after seven days of cultivation. The tensile strength of wet BC from hydrolysate medium was about 0.04 MPa compared to about 0.03 MPa for BC from a glucose-based reference medium, while the crystallinity was slightly lower for BC from hydrolysate cultures. The spent hydrolysates were used for production of cellulase with T. reesei. The cellulase activity (CMCase activity) in spent SAFS and SIFS hydrolysates reached 5.2 U/mL (87 nkat/mL), which was similar to the activity level obtained in a reference medium containing equal amounts of reducing sugar. Conclusions It was shown that waste fiber sludge is a suitable raw material for production of bacterial cellulose and enzymes through sequential fermentation. The concept studied offers efficient utilization of the various components in fiber sludge hydrolysates and affords a possibility to combine production of two high value-added products using residual streams from pulp mills and biorefineries. Cellulase produced in this manner could tentatively be used to hydrolyze fresh fiber sludge to obtain medium suitable for production of BC in the same biorefinery. PMID:23414733

[A PARADIGM SHIFT IN THE PERCEPTION OF HEALTH MAINTENANCE FROM INCREASING PHYSICAL ACTIVITY TO DECREASING PHYSICAL INACTIVITY].

PubMed

Rotman, Dani; Constantini, Naama

2016-06-01

Modern man spends most of his waking hours (50-70%) in one form or another of sedentary behavior, defined as activity conducted in a sitting or reclining position involving low energy expenditure. The remaining waking hours are spent performing low intensity physical activity (25-45%) and medium-high intensity physical activity (less than 5%): Despite this distribution, medical research has focused on the impact of increasing medium-high intensity physical activity and many health organizations' recommendations are in accordance. In recent years, research conducted has begun to examine the effect inactivity has on health and has shown that excess sedentary behaviour is an independent risk factor for a wide range of medical problems such as obesity, metabolic syndrome, poor cardiovascular health profile, diabetes mellitus, and possibly cancer. Although the higher risk brought on by sedentary behaviour is partially reduced by increasing medium-high intensity physical activity, it is not completely neutralized. One way to diminish the harm caused by long hours of sitting is to take short breaks during periods of prolonged sitting in order to walk. According to these findings, it is worthwhile to recommend reducing the hours spent in sedentary behaviour, or at least to take frequent short breaks ("activity snacks") during periods of prolonged sitting to get up and walk around.

Enhancement in lipid content of Chlorella sp. MJ 11/11 from the spent medium of thermophilic biohydrogen production process.

PubMed

Ghosh, Supratim; Roy, Shantonu; Das, Debabrata

2017-01-01

The present study investigates the effect of spent media of acetogenic dark fermentation for mixotrophic algal cultivation for biodiesel production. Mixotrophic growth conditions were optimized in culture flask (250mL) using Chlorella sp. MJ 11/11. Maximum lipid accumulation (58% w/w) was observed under light intensity, pH, nitrate and phosphate concentration of 100μmolm -2 s -1 , 7, 2.7mM and 1.8mM, respectively. Air lift (1.4L) and flat panel (1.4L) reactors were considered for algal cultivation. Air lift showed significant improvement in biomass and lipid production as compared to flat panel reactor. The results could help in development of sustainable technology involving acetogenic hydrogen production integrated with sequential mitigation of spent media by algal cultivation for improved energy recovery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effect of increasing the level of alfalfa hay in finishing beef heifer diets on intake, sorting, and feeding behavior.

PubMed

Madruga, A; González, L A; Mainau, E; Ruíz de la Torre, J L; Rodríguez-Prado, M; Manteca, X; Ferret, A

2018-02-15

Eight rumen cannulated Simmental heifers (BW = 281.4 ± 7.28 kg) were randomly assigned to one of four experimental treatments in a 4 × 4 replicated Latin square design to ascertain the effects of increasing levels of alfalfa hay on intake, sorting, and feeding behavior in comparison to barley straw as forage source. Treatments tested were four total mixed rations with: 1) 10% barley straw (10BS) with 7.0% NDF from forage, 2) 13% alfalfa hay (13AH) and less NDF from forage (5.7%) than 10BS, 3) 16% alfalfa hay (16AH) and the same NDF from forage (7.0%) as 10BS, and 4) 19% alfalfa hay (19AH) and more NDF from forage (8.3%) than 10BS. Each experimental period consisted of 3 wk for adaptation and 1 wk for sampling. Increasing the proportion of alfalfa hay in the diet linearly increased (P < 0.05) total DMI, CP intake, water consumption, intake of long, medium and fine particle size, extent of sorting of fine particle size, and time spent rumination, but linearly decreased (P < 0.05) extent of sorting of short particle size. Intake of DM was higher in heifers fed 16AH and 19AH than in heifers fed 10BS (P < 0.001). Intake of NDF and physically effective NDF (peNDF) was greater in 13AH, 16AH, and 19AH than in 10BS (P < 0.01). The DMI of medium and short particle size was greater in 13AH, 16AH, and 19AH than in 10BS (P < 0.05), whereas DMI of long particle size was greater in 16AH and 19AH compared to 10BS (P < 0.001). Heifers fed 13AH, 16AH, and 19AH diets sorted against fine particle size and sorted for or tended to sort for short, medium, and long particle sizes. Meal length was greater in heifers fed 16AH and 19AH than 10BS (P < 0.05). Time spent eating was not affected by diet but time spent ruminating was greater in heifers fed 19AH than in 10BS (P < 0.05). Results indicate that the inclusion of alfalfa hay at 19% of incorporation caused an increase in DM, NDF, and peNDF intake, in comparison to the 10BS diet. In the same way, intake of long, medium, and short particle size was greater in this diet. Moreover, heifers fed 19AH sorted for medium particle size and tended to sort for long and short particles size, and against fine particle size. Sorting behavior and meal length increased in the 19AH diet, which leads us to think that sorting feed ingredients requires time and therefore lengthens the meal. Time spent ruminating was greater in heifers fed 19AH, thus reducing the risk of ruminal acidosis when animals are fed high concentrate diets.

Cooling circuit for and method of cooling a gas turbine bucket

DOEpatents

Jacala, Ariel C. P.

2002-01-01

A closed internal cooling circuit for a gas turbine bucket includes axial supply and return passages in the dovetail of the bucket. A first radial outward supply passage provides cooling medium to and along a passageway adjacent the leading edge and then through serpentine arranged passageways within the airfoil to a chamber adjacent the airfoil tip. A second radial passage crosses over the radial return passage for supplying cooling medium to and along a pair of passageways along the trailing edge of the airfoil section. The last passageway of the serpentine passageways and the pair of passageways communicate one with the other in the chamber for returning spent cooling medium radially inwardly along divided return passageways to the return passage. In this manner, both the leading and trailing edges are cooled using the highest pressure, lowest temperature cooling medium.

The effect of loving-kindness meditation on positive emotions: a meta-analytic review.

PubMed

Zeng, Xianglong; Chiu, Cleo P K; Wang, Rong; Oei, Tian P S; Leung, Freedom Y K

2015-01-01

While it has been suggested that loving-kindness meditation (LKM) is an effective practice for promoting positive emotions, the empirical evidence in the literature remains unclear. Here, we provide a systematic review of 24 empirical studies (N = 1759) on LKM with self-reported positive emotions. The effect of LKM on positive emotions was estimated with meta-analysis, and the influence of variations across LKM interventions was further explored with subgroup analysis and meta-regression. The meta-analysis showed that (1) medium effect sizes for LKM interventions on daily positive emotions in both wait-list controlled RCTs and non-RCT studies; and (2) small to large effect sizes for the on-going practice of LKM on immediate positive emotions across different comparisons. Further analysis showed that (1) interventions focused on loving-kindness had medium effect size, but interventions focused on compassion showed small effect sizes; (2) the length of interventions and the time spent on meditation did not influence the effect sizes, but the studies without didactic components in interventions had small effect sizes. A few individual studies reported that the nature of positive emotions and individual differences also influenced the results. In sum, LKM practice and interventions are effective in enhancing positive emotions, but more studies are needed to identify the active components of the interventions, to compare different psychological operations, and to explore the applicability in clinical populations.

The effect of loving-kindness meditation on positive emotions: a meta-analytic review

PubMed Central

Zeng, Xianglong; Chiu, Cleo P. K.; Wang, Rong; Oei, Tian P. S.; Leung, Freedom Y. K.

2015-01-01

While it has been suggested that loving-kindness meditation (LKM) is an effective practice for promoting positive emotions, the empirical evidence in the literature remains unclear. Here, we provide a systematic review of 24 empirical studies (N = 1759) on LKM with self-reported positive emotions. The effect of LKM on positive emotions was estimated with meta-analysis, and the influence of variations across LKM interventions was further explored with subgroup analysis and meta-regression. The meta-analysis showed that (1) medium effect sizes for LKM interventions on daily positive emotions in both wait-list controlled RCTs and non-RCT studies; and (2) small to large effect sizes for the on-going practice of LKM on immediate positive emotions across different comparisons. Further analysis showed that (1) interventions focused on loving-kindness had medium effect size, but interventions focused on compassion showed small effect sizes; (2) the length of interventions and the time spent on meditation did not influence the effect sizes, but the studies without didactic components in interventions had small effect sizes. A few individual studies reported that the nature of positive emotions and individual differences also influenced the results. In sum, LKM practice and interventions are effective in enhancing positive emotions, but more studies are needed to identify the active components of the interventions, to compare different psychological operations, and to explore the applicability in clinical populations. PMID:26579061

Enhanced recovery of valuable metals from spent lithium-ion batteries through optimization of organic acids produced by Aspergillus niger.

PubMed

Bahaloo-Horeh, Nazanin; Mousavi, Seyyed Mohammad

2017-02-01

In the present study, spent medium bioleaching method was performed using organic acids produced by Aspergillus niger to dissolve Ni, Co, Mn, Li, Cu and Al from spent lithium-ion batteries (LIBs). Response surface methodology was used to investigate the effects and interactions between the effective factors of sucrose concentration, initial pH, and inoculum size to optimize organic acid production. Maximum citric acid, malic acid, and gluconic acid concentrations of 26,478, 1832.53 and 8433.76ppm, respectively, and a minimum oxalic acid concentration of 305.558ppm were obtained under optimal conditions of 116.90 (gl -1 ) sucrose concentration, 3.45% (vv -1 ) inoculum size, and a pH value of 5.44. Biogenically-produced organic acids are used for leaching of spent LIBs at different pulp densities. The highest metal recovery of 100% Cu, 100% Li, 77% Mn, and 75% Al occurred at 2% (wv -1 ) pulp density; 64% Co and 54% Ni recovery occurred at 1% (wv -1 ) pulp density. The bioleaching of metals from spent LIBs can decrease the environmental impact of this waste. The results of this study suggest that the process can be used for large scale industrial purposes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Physical activity and screen time in children and adolescents in a medium size town in the South of Brazil.

PubMed

Greca, João Paulo de Aguiar; Silva, Diego Augusto Santos; Loch, Mathias Roberto

2016-09-01

To analyze the associations between sex and age with behaviour related to physical activity practice and sedentary behaviour in children and adolescents. A cross-sectional study with 480 (236 boys) subjects enrolled in a public school in the city of Londrina, in the south of Brazil, aged 8-17 years. Measures of physical activity, sports practice and screen times were obtained using the Physical Activity Questionnaire for Older Children. The Mann-Whitney U test was used to compare variables between boys and girls. The Chi squared test was used for categorical analysis and Poisson regression was used to identify prevalence. Girls (69.6%; PR=1.05 [0.99-1.12]) spent more time with sedentary behaviour than boys (62.2%). Boys (80%; PR=0.95 [0.92-0.98]) were more physically active than girls (91%). Older students aged 13-17 showed a higher prevalence of physical inactivity (91.4%; PR=1.06 [1.02-1.10]) and time spent with sedentary behaviour of ≥2h/day (71.8%; PR=0.91 [0.85-0.97]) when compared to younger peers aged 8-12 (78.7 and 58.5%, respectively). The prevalence of physical inactivity was higher in girls. Older students spent more screen time in comparison to younger students. Copyright © 2016 Sociedade de Pediatria de São Paulo. Publicado por Elsevier Editora Ltda. All rights reserved.

Isolation of Lactobacillus salivarius 1077 (NRRL B-50053) and characterization of its bacteriocin and spectra of antimicrobial activity

USDA-ARS?s Scientific Manuscript database

Lactobacillus salivarius 1077 (NRRL B-50053) was isolated from poultry intestinal materials after demonstrating in-vitro anti-Campylobacter jejuni activity. The isolate was then used for in-vitro fermentation. The protein content of the cell-free supernatant from the spent medium was precipitated ...

Maximization of organic acids production by Aspergillus niger in a bubble column bioreactor for V and Ni recovery enhancement from power plant residual ash in spent-medium bioleaching experiments.

PubMed

Rasoulnia, P; Mousavi, S M

2016-09-01

Spent-medium bioleaching of V and Ni from a power plant residual ash (PPR ash) was conducted using organic acids produced by Aspergillus niger. The production of organic acids in a bubble column bioreactor was optimized through selecting three most influencing factors. Under optimum condition of aeration rate of 762.5(ml/min), sucrose concentration of 101.9(g/l) and inoculum size of 40(ml/l), respectively 17,185, 4539, 1042 and 502(ppm) of oxalic, gluconic, citric and malic acids were produced. Leaching experiments were carried out using biogenic produced organic acids under leaching environment temperature of 60°C and rotary shaking speed of 135rpm, with various pulp densities of 1, 2, 3, 5, 7 and 9(%w/v). The results showed that biogenic produced organic acids leached V much more efficiently than Ni so that even at high pulp density of 9(%w/v), 83% of V was recovered while Ni recovery yield was 30%. Copyright © 2016 Elsevier Ltd. All rights reserved.

Fabrication of magnetic biochar as a treatment medium for As(V) via pyrolysis of FeCl3-pretreated spent coffee ground.

PubMed

Cho, Dong-Wan; Yoon, Kwangsuk; Kwon, Eilhann E; Biswas, Jayanta Kumar; Song, Hocheol

2017-10-01

This study investigated the preparation of magnetic biochar from N 2 - and CO 2 -assisted pyrolysis of spent coffee ground (SCG) for use as an adsorption medium for As(V), and the effects of FeCl 3 pretreatment of SCG on the material properties and adsorption capability of the produced biochar. Pyrolysis of FeCl 3 -pretreated SCG in CO 2 atmosphere produced highly porous biochar with its surface area ∼70 times greater than that produced in N 2 condition. However, despite the small surface area, biochar produced in N 2 showed greater As(V) adsorption capability. X-ray diffraction and X-ray photoelectron spectrometer analyses identified Fe 3 C and Fe 3 O 4 as dominant mineral phases in N 2 and CO 2 conditions, with the former being much more adsorptive toward As(V). The overall results suggest functional biochar can be facilely fabricated by necessary pretreatment to expand the applicability of biochar for specific purposes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Spiral vane bioreactor

NASA Technical Reports Server (NTRS)

Morrison, Dennis R. (Inventor)

1991-01-01

A spiral vane bioreactor of a perfusion type is described in which a vertical chamber, intended for use in a microgravity condition, has a central rotating filter assembly and has flexible membranes disposed to rotate annularly about the filter assembly. The flexible members have end portions disposed angularly with respect to one another. A fluid replenishment medium is input from a closed loop liquid system to a completely liquid filled chamber containing microcarrier beads, cells and a fluid medium. Output of spent medium is to the closed loop. In the closed loop, the output and input parameters are sensed by sensors. A manifold permits recharging of the nutrients and pH adjustment. Oxygen is supplied and carbon dioxide and bubbles are removed and the system is monitored and controlled by a microprocessor.

Fungal leaching of valuable metals from a power plant residual ash using Penicillium simplicissimum: Evaluation of thermal pretreatment and different bioleaching methods.

PubMed

Rasoulnia, P; Mousavi, S M; Rastegar, S O; Azargoshasb, H

2016-06-01

Each year a tremendous volume of V-Ni rich ashes is produced by fuel oil consuming power plants throughout the world. Recovery of precious metals existing in these ashes is very important from both economic and environmental aspects. The present research was aimed at investigating bioleaching potential of Penicillium simplicissimum for the recovery of metals from power plant residual ash (PPR ash) using different bioleaching methods such as one-step, two-step, and spent-medium bioleaching at 1% (w/v) pulp density. Furthermore, the effects of thermal pretreatment on leaching of V, Ni, and Fe, as major elements present in PPR ash, were studied. Thermal pretreatment at various temperatures removed the carbonaceous and volatile fraction of the ash and affected the fungal growth and metal leachability. The highest extraction yields of V and Ni were achieved for the original PPR ash, using spent-medium bioleaching in which nearly 100% of V and 40% of Ni were extracted. The maximum extraction yield of Fe (48.3%) was obtained for the pretreated PPR ash at 400°C by spent-medium bioleaching. In addition, the fungal growth in pure culture was investigated through measurement of produced organic acids via high performance liquid chromatography (HPLC). Chemical leaching experiments were performed, using commercial organic acids at the same concentrations as those produced under optimum condition of fungal growth (5237ppm citric, 3666ppm gluconic, 1287ppm oxalic and 188ppm malic acid). It was found that in comparison to chemical leaching, bioleaching improved V and Ni recovery up to 19% and 12%, respectively. Moreover, changes in physical and chemical properties as well as morphology of the samples utilizing appropriate analytical methods such as XRF, XRD, FTIR, and FE-SEM were comprehensively investigated. Copyright © 2016 Elsevier Ltd. All rights reserved.

Time Spent Walking and Risk of Diabetes in Japanese Adults: The Japan Public Health Center-Based Prospective Diabetes Study.

PubMed

Kabeya, Yusuke; Goto, Atsushi; Kato, Masayuki; Matsushita, Yumi; Takahashi, Yoshihiko; Isogawa, Akihiro; Inoue, Manami; Mizoue, Tetsuya; Tsugane, Shoichiro; Kadowaki, Takashi; Noda, Mitsuhiko

2016-01-01

The association between time spent walking and risk of diabetes was investigated in a Japanese population-based cohort. Data from the Japan Public Health Center-based Prospective Diabetes cohort were analyzed. The surveys of diabetes were performed at baseline and at the 5-year follow-up. Time spent walking per day was assessed using a self-reported questionnaire (<30 minutes, 30 minutes to <1 hour, 1 to <2 hours, or ≥2 hours). A cross-sectional analysis was performed among 26 488 adults in the baseline survey. Logistic regression was used to examine the association between time spent walking and the presence of unrecognized diabetes. We then performed a longitudinal analysis that was restricted to 11 101 non-diabetic adults who participated in both the baseline and 5-year surveys. The association between time spent walking and the incidence of diabetes during the 5 years was examined. In the cross-sectional analysis, 1058 participants had unrecognized diabetes. Those with time spent walking of <30 minutes per day had increased odds of having diabetes in relation to those with time spent walking of ≥2 hours (adjusted odds ratio [OR] 1.23; 95% CI, 1.02-1.48). In the longitudinal analysis, 612 participants developed diabetes during the 5 years of follow-up. However, a significant association between time spent walking and the incidence of diabetes was not observed. Increased risk of diabetes was implied in those with time spent walking of <30 minutes per day, although the longitudinal analysis failed to show a significant result.

Retention sleeve for a thermal medium carrying tube in a gas turbine

DOEpatents

Lathrop, Norman Douglas; Czachor, Robert Paul

2003-01-01

Multiple tubes are connected to steam supply and spent cooling steam return manifolds for supplying cooling steam to buckets and returning spent cooling steam from the buckets to the manifolds, respectively. The tubes are prevented from axial movement in one direction by flanges engaging end faces of the spacer between the first and second-stage wheels. Retention sleeves are disposed about cantilevered ends of the tubes. One end of the retention sleeve engages an enlarged flange on the tube, while an opposite end is spaced axially from an end face of the adjoining wheel, forming a gap, enabling thermal expansion of the tubes and limiting axial displacement of the tube in the opposite direction.

Monte Carlo Shielding Comparative Analysis Applied to TRIGA HEU and LEU Spent Fuel Transport

NASA Astrophysics Data System (ADS)

Margeanu, C. A.; Margeanu, S.; Barbos, D.; Iorgulis, C.

2010-12-01

The paper is a comparative study of LEU and HEU fuel utilization effects for the shielding analysis during spent fuel transport. A comparison against the measured data for HEU spent fuel, available from the last stage of spent fuel repatriation fulfilled in the summer of 2008, is also presented. All geometrical and material data for the shipping cask were considered according to NAC-LWT Cask approved model. The shielding analysis estimates radiation doses to shipping cask wall surface, and in air at 1 m and 2 m, respectively, from the cask, by means of 3D Monte Carlo MORSE-SGC code. Before loading into the shipping cask, TRIGA spent fuel source terms and spent fuel parameters have been obtained by means of ORIGEN-S code. Both codes are included in ORNL's SCALE 5 programs package. The actinides contribution to total fuel radioactivity is very low in HEU spent fuel case, becoming 10 times greater in LEU spent fuel case. Dose rates for both HEU and LEU fuel contents are below regulatory limits, LEU spent fuel photon dose rates being greater than HEU ones. Comparison between HEU spent fuel theoretical and measured dose rates in selected measuring points shows a good agreement, calculated values being greater than the measured ones both to cask wall surface (about 34% relative difference) and in air at 1 m distance from cask surface (about 15% relative difference).

Are root cause analyses recommendations effective and sustainable? An observational study.

PubMed

Hibbert, Peter D; Thomas, Matthew J W; Deakin, Anita; Runciman, William B; Braithwaite, Jeffrey; Lomax, Stephanie; Prescott, Jonathan; Gorrie, Glenda; Szczygielski, Amy; Surwald, Tanja; Fraser, Catherine

2018-03-01

To assess the strength of root cause analysis (RCA) recommendations and their perceived levels of effectiveness and sustainability. All RCAs related to sentinel events (SEs) undertaken between the years 2010 and 2015 in the public health system in Victoria, Australia were analysed. The type and strength of each recommendation in the RCA reports were coded by an expert patient safety classifier using the US Department of Veteran Affairs type and strength criteria. Thirty-six public health services. The proportion of RCA recommendations which were classified as 'strong' (more likely to be effective and sustainable), 'medium' (possibly effective and sustainable) or 'weak' (less likely to be effective and sustainable). There were 227 RCAs in the period of study. In these RCAs, 1137 recommendations were made. Of these 8% were 'strong', 44% 'medium' and 48% were 'weak'. In 31 RCAs, or nearly 15%, only weak recommendations were made. In 24 (11%) RCAs five or more weak recommendations were made. In 165 (72%) RCAs no strong recommendations were made. The most frequent recommendation types were reviewing or enhancing a policy/guideline/documentation, and training and education. Only a small proportion of recommendations arising from RCAs in Victoria are 'strong'. This suggests that insights from the majority of RCAs are not likely to inform practice or process improvements. Suggested improvements include more human factors expertise and independence in investigations, more extensive application of existing tools that assist teams to prioritize recommendations that are likely to be effective, and greater use of observational and simulation techniques to understand the underlying systems factors. Time spent in repeatedly investigating similar incidents may be better spent aggregating and thematically analysing existing sources of information about patient safety.

Exometabolomics Assisted Design and Validation of Synthetic Obligate Mutualism

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kosina, Suzanne M.; Danielewicz, Megan A.; Mohammed, Mujahid

Synthetic microbial ecology has the potential to enhance the productivity and resiliency of biotechnology processes compared to approaches using single isolates. Engineering microbial consortia is challenging; however, one approach that has attracted significant attention is the creation of synthetic obligate mutualism using auxotrophic mutants that depend on each other for exchange or cross-feeding of metabolites. In this paper, we describe the integration of mutant library fitness profiling with mass spectrometry based exometabolomics as a method for constructing synthetic mutualism based on cross-feeding. Two industrially important species lacking known ecological interactions, Zymomonas mobilis and Escherichia coli, were selected as the testmore » species. Amino acid exometabolites identified in the spent medium of Z. mobilis were used to select three corresponding E. coli auxotrophs (proA, pheA and IlvA), as potential E. coli counterparts for the coculture. A pooled mutant fitness assay with a Z. mobilis transposon mutant library was used to identify mutants with improved growth in the presence of E. coli. An auxotroph mutant in a gene (ZMO0748) with sequence similarity to cysteine synthase A (cysK), was selected as the Z. mobilis counterpart for the coculture. Exometabolomic analysis of spent E. coli medium identified glutathione related metabolites as potentially available for rescue of the Z. mobilis cysteine synthase mutant. Three sets of cocultures between the Z. mobilis auxotroph and each of the three E. coli auxotrophs were monitored by optical density for growth and analyzed by flow cytometry to confirm high cell counts for each species. Taken together, our methods provide a technological framework for creating synthetic mutualisms combining existing screening based methods and exometabolomics for both the selection of obligate mutualism partners and elucidation of metabolites involved in auxotroph rescue.« less

Unexpected features of exponentially growing Tobacco Bright Yellow-2 cell suspension culture in relation to excreted extracellular polysaccharides and cell wall composition.

PubMed

Issawi, Mohammad; Muhieddine, Mohammad; Girard, Celine; Sol, Vincent; Riou, Catherine

2017-10-01

This article presents a new insight about TBY-2 cells; from extracellular polysaccharides secretion to cell wall composition during cell suspension culture. In the medium of cells taken 2 days after dilution (end of lag phase), a two unit pH decrease from 5.38 to 3.45 was observed and linked to a high uronic acid (UA) amount secretion (47.8%) while, in 4 and 7 day-old spent media, pH increased and UA amounts decreased 35.6 and 42.3% UA, respectively. To attain deeper knowledge of the putative link between extracellular polysaccharide excretion and cell wall composition, we determined cell wall UA and neutral sugar composition of cells from D2 to D12 cultures. While cell walls from D2 and D3 cells contained a large amount of uronic acid (twice as much as the other analysed cell walls), similar amounts of neutral sugar were detected in cells from lag to end of exponential phase cells suggesting an enriched pectin network in young cultures. Indeed, monosaccharide composition analysis leads to an estimated percentage of pectins of 56% for D3 cell wall against 45% D7 cell walls indicating that the cells at the mid-exponential growth phase re-organized their cell wall linked to a decrease in secreted UA that finally led to a stabilization of the spent medium pH to 5.4. In conclusion, TBY-2 cell suspension from lag to stationary phase showed cell wall remodeling that could be of interest in drug interaction and internalization study.

Exometabolomics Assisted Design and Validation of Synthetic Obligate Mutualism

DOE PAGES

Kosina, Suzanne M.; Danielewicz, Megan A.; Mohammed, Mujahid; ...

2016-02-17

Synthetic microbial ecology has the potential to enhance the productivity and resiliency of biotechnology processes compared to approaches using single isolates. Engineering microbial consortia is challenging; however, one approach that has attracted significant attention is the creation of synthetic obligate mutualism using auxotrophic mutants that depend on each other for exchange or cross-feeding of metabolites. In this paper, we describe the integration of mutant library fitness profiling with mass spectrometry based exometabolomics as a method for constructing synthetic mutualism based on cross-feeding. Two industrially important species lacking known ecological interactions, Zymomonas mobilis and Escherichia coli, were selected as the testmore » species. Amino acid exometabolites identified in the spent medium of Z. mobilis were used to select three corresponding E. coli auxotrophs (proA, pheA and IlvA), as potential E. coli counterparts for the coculture. A pooled mutant fitness assay with a Z. mobilis transposon mutant library was used to identify mutants with improved growth in the presence of E. coli. An auxotroph mutant in a gene (ZMO0748) with sequence similarity to cysteine synthase A (cysK), was selected as the Z. mobilis counterpart for the coculture. Exometabolomic analysis of spent E. coli medium identified glutathione related metabolites as potentially available for rescue of the Z. mobilis cysteine synthase mutant. Three sets of cocultures between the Z. mobilis auxotroph and each of the three E. coli auxotrophs were monitored by optical density for growth and analyzed by flow cytometry to confirm high cell counts for each species. Taken together, our methods provide a technological framework for creating synthetic mutualisms combining existing screening based methods and exometabolomics for both the selection of obligate mutualism partners and elucidation of metabolites involved in auxotroph rescue.« less

Exometabolomics Assisted Design and Validation of Synthetic Obligate Mutualism.

PubMed

Kosina, Suzanne M; Danielewicz, Megan A; Mohammed, Mujahid; Ray, Jayashree; Suh, Yumi; Yilmaz, Suzan; Singh, Anup K; Arkin, Adam P; Deutschbauer, Adam M; Northen, Trent R

2016-07-15

Synthetic microbial ecology has the potential to enhance the productivity and resiliency of biotechnology processes compared to approaches using single isolates. Engineering microbial consortia is challenging; however, one approach that has attracted significant attention is the creation of synthetic obligate mutualism using auxotrophic mutants that depend on each other for exchange or cross-feeding of metabolites. Here, we describe the integration of mutant library fitness profiling with mass spectrometry based exometabolomics as a method for constructing synthetic mutualism based on cross-feeding. Two industrially important species lacking known ecological interactions, Zymomonas mobilis and Escherichia coli, were selected as the test species. Amino acid exometabolites identified in the spent medium of Z. mobilis were used to select three corresponding E. coli auxotrophs (proA, pheA and IlvA), as potential E. coli counterparts for the coculture. A pooled mutant fitness assay with a Z. mobilis transposon mutant library was used to identify mutants with improved growth in the presence of E. coli. An auxotroph mutant in a gene (ZMO0748) with sequence similarity to cysteine synthase A (cysK), was selected as the Z. mobilis counterpart for the coculture. Exometabolomic analysis of spent E. coli medium identified glutathione related metabolites as potentially available for rescue of the Z. mobilis cysteine synthase mutant. Three sets of cocultures between the Z. mobilis auxotroph and each of the three E. coli auxotrophs were monitored by optical density for growth and analyzed by flow cytometry to confirm high cell counts for each species. Taken together, our methods provide a technological framework for creating synthetic mutualisms combining existing screening based methods and exometabolomics for both the selection of obligate mutualism partners and elucidation of metabolites involved in auxotroph rescue.

Epileptogenesis in organotypic hippocampal cultures has limited dependence on culture medium composition

PubMed Central

Mahoney, Mark M.; Staley, Kevin J.

2017-01-01

Rodent organotypic hippocampal cultures spontaneously develop epileptiform activity after approximately 2 weeks in vitro and are increasingly used as a model of chronic post-traumatic epilepsy. However, organotypic cultures are maintained in an artificial environment (culture medium), which contains electrolytes, glucose, amino acids and other components that are not present at the same concentrations in cerebrospinal fluid (CSF). Therefore, it is possible that epileptogenesis in organotypic cultures is driven by these components. We examined the influence of medium composition on epileptogenesis. Epileptogenesis was evaluated by measurements of lactate and lactate dehydrogenase (LDH) levels (biomarkers of ictal activity and cell death, respectively) in spent culture media, immunohistochemistry and automated 3-D cell counts, and extracellular recordings from CA3 regions. Changes in culture medium components moderately influenced lactate and LDH levels as well as electrographic seizure burden and cell death. However, epileptogenesis occurred in any culture medium that was capable of supporting neural survival. We conclude that medium composition is unlikely to be the cause of epileptogenesis in the organotypic hippocampal culture model of chronic post-traumatic epilepsy. PMID:28225808

Epileptogenesis in organotypic hippocampal cultures has limited dependence on culture medium composition.

PubMed

Liu, Jing; Saponjian, Yero; Mahoney, Mark M; Staley, Kevin J; Berdichevsky, Yevgeny

2017-01-01

Rodent organotypic hippocampal cultures spontaneously develop epileptiform activity after approximately 2 weeks in vitro and are increasingly used as a model of chronic post-traumatic epilepsy. However, organotypic cultures are maintained in an artificial environment (culture medium), which contains electrolytes, glucose, amino acids and other components that are not present at the same concentrations in cerebrospinal fluid (CSF). Therefore, it is possible that epileptogenesis in organotypic cultures is driven by these components. We examined the influence of medium composition on epileptogenesis. Epileptogenesis was evaluated by measurements of lactate and lactate dehydrogenase (LDH) levels (biomarkers of ictal activity and cell death, respectively) in spent culture media, immunohistochemistry and automated 3-D cell counts, and extracellular recordings from CA3 regions. Changes in culture medium components moderately influenced lactate and LDH levels as well as electrographic seizure burden and cell death. However, epileptogenesis occurred in any culture medium that was capable of supporting neural survival. We conclude that medium composition is unlikely to be the cause of epileptogenesis in the organotypic hippocampal culture model of chronic post-traumatic epilepsy.

Qubit Residence Time Measurements with a Bose-Einstein Condensate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sokolovski, D.

2009-06-12

We show that an electrostatic qubit located near a Bose-Einstein condensate trapped in a symmetric double-well potential can be used to measure the duration the qubit has spent in one of its quantum states. The strong, medium, and weak measurement regimes are analyzed. The analogy between the residence and the traversal (tunnelling) times is highlighted.

Time Spent Walking and Risk of Diabetes in Japanese Adults: The Japan Public Health Center-Based Prospective Diabetes Study

PubMed Central

Kabeya, Yusuke; Goto, Atsushi; Kato, Masayuki; Matsushita, Yumi; Takahashi, Yoshihiko; Isogawa, Akihiro; Inoue, Manami; Mizoue, Tetsuya; Tsugane, Shoichiro; Kadowaki, Takashi; Noda, Mitsuhiko

2016-01-01

Background The association between time spent walking and risk of diabetes was investigated in a Japanese population-based cohort. Methods Data from the Japan Public Health Center-based Prospective Diabetes cohort were analyzed. The surveys of diabetes were performed at baseline and at the 5-year follow-up. Time spent walking per day was assessed using a self-reported questionnaire (<30 minutes, 30 minutes to <1 hour, 1 to <2 hours, or ≥2 hours). A cross-sectional analysis was performed among 26 488 adults in the baseline survey. Logistic regression was used to examine the association between time spent walking and the presence of unrecognized diabetes. We then performed a longitudinal analysis that was restricted to 11 101 non-diabetic adults who participated in both the baseline and 5-year surveys. The association between time spent walking and the incidence of diabetes during the 5 years was examined. Results In the cross-sectional analysis, 1058 participants had unrecognized diabetes. Those with time spent walking of <30 minutes per day had increased odds of having diabetes in relation to those with time spent walking of ≥2 hours (adjusted odds ratio [OR] 1.23; 95% CI, 1.02–1.48). In the longitudinal analysis, 612 participants developed diabetes during the 5 years of follow-up. However, a significant association between time spent walking and the incidence of diabetes was not observed. Conclusions Increased risk of diabetes was implied in those with time spent walking of <30 minutes per day, although the longitudinal analysis failed to show a significant result. PMID:26725285

Indole-3-acetic acid biosynthetic pathway and aromatic amino acid aminotransferase activities in Pantoea dispersa strain GPK.

PubMed

Kulkarni, G B; Nayak, A S; Sajjan, S S; Oblesha, A; Karegoudar, T B

2013-05-01

This investigation deals with the production of IAA by a bacterial isolate Pantoea dispersa strain GPK (PDG) identified by 16S rRNA gene sequence analysis. HPLC and Mass spectral analysis of metabolites from bacterial spent medium revealed that, IAA production by PDG is Trp-dependent and follows indole-3-pyruvic acid (IPyA) pathway. Substrate specificity study of aromatic amino acid aminotransferase (AAT) showed high activities, only when tryptophan (Trp) and α-ketoglutarate (α-kg) were used as substrates. AAT is highly specific for Trp and α-kg as amino group donor and acceptor, respectively. The effect of exogenous IAA on bacterial growth was established. Low concentration of exogenous IAA induced the growth, whereas high concentration decreased the growth of bacterium. PDG treatment significantly increased the root length, shoot length and dry mass of the chickpea and pigeon pea plants. © 2013 The Society for Applied Microbiology.

Comparative analysis of LWR and FBR spent fuels for nuclear forensics evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Permana, Sidik; Suzuki, Mitsutoshi; Su'ud, Zaki

2012-06-06

Some interesting issues are attributed to nuclide compositions of spent fuels from thermal reactors as well as fast reactors such as a potential to reuse as recycled fuel, and a possible capability to be manage as a fuel for destructive devices. In addition, analysis on nuclear forensics which is related to spent fuel compositions becomes one of the interesting topics to evaluate the origin and the composition of spent fuels from the spent fuel foot-prints. Spent fuel compositions of different fuel types give some typical spent fuel foot prints and can be estimated the origin of source of those spentmore » fuel compositions. Some technics or methods have been developing based on some science and technological capability including experimental and modeling or theoretical aspects of analyses. Some foot-print of nuclear forensics will identify the typical information of spent fuel compositions such as enrichment information, burnup or irradiation time, reactor types as well as the cooling time which is related to the age of spent fuels. This paper intends to evaluate the typical spent fuel compositions of light water (LWR) and fast breeder reactors (FBR) from the view point of some foot prints of nuclear forensics. An established depletion code of ORIGEN is adopted to analyze LWR spent fuel (SF) for several burnup constants and decay times. For analyzing some spent fuel compositions of FBR, some coupling codes such as SLAROM code, JOINT and CITATION codes including JFS-3-J-3.2R as nuclear data library have been adopted. Enriched U-235 fuel composition of oxide type is used for fresh fuel of LWR and a mixed oxide fuel (MOX) for FBR fresh fuel. Those MOX fuels of FBR come from the spent fuels of LWR. Some typical spent fuels from both LWR and FBR will be compared to distinguish some typical foot-prints of SF based on nuclear forensic analysis.« less

Modulation of the Effect of l‐β‐D‐Arabinofuranosylcytosine by 6‐Mercaptopurine in L1210 Cells

PubMed Central

Kawai, Yasukazu; Ueda, Takanori; Nakamura, Toru

1994-01-01

In L1210 cells incubated with l‐β‐D‐arabinofuranosylcytosine (ara‐C), 6‐mercaptopurine (6‐MP) significantly potentiated 1‐β‐D‐arabinofuranosylcytosme 5′‐triphosphate (ara‐CTP) accumulation and ara‐C incorporation into DNA (ara‐C/DNA). The cytotoxicity of these two drugs was assessed to be at least additive by clonogenic assay. l‐β‐D‐Arabinofuranosylnracil (ara‐U) level in a cell suspension was suppressed by 6‐MP in a concentration‐dependent fashion, though intracellular cytidine deaminase (CDD) activity was not affected by 6‐MP. In addition, extracted CDD activity was not directly inhibited by 6‐MP or by its intracellular metabolites in vitro. After preincubation in the presence or absence of 6‐MP, the cell suspension was fractionated to obtain the spent medium and cell pellet. Then, each fraction was incubated with ara‐C. Ara‐U formation in the spent medium was found to increase conspicuously in relation to the time of preincubation in the control and it was suppressed by 6‐MP pretreatment. Ara‐U formation in the cell compartment increased slightly in relation to the time of preincubation in the control and substantially no suppression of ara‐U formation was observed in spite of 6‐MP pretreatment. In conclusion, intracellularly synthesized CDD was thought to be rapidly shed into the medium and the released CDD could play an important role in ara‐C inactivation. 6‐MP interrupted some step between synthesis and shedding of CDD, resulting in a decrease of the ara‐C deamination in the medium and enhancement of its antileukemic effect. PMID:7961129

Time Spent on Social Network Sites and Psychological Well-Being: A Meta-Analysis.

PubMed

Huang, Chiungjung

2017-06-01

This meta-analysis examines the relationship between time spent on social networking sites and psychological well-being factors, namely self-esteem, life satisfaction, loneliness, and depression. Sixty-one studies consisting of 67 independent samples involving 19,652 participants were identified. The mean correlation between time spent on social networking sites and psychological well-being was low at r = -0.07. The correlations between time spent on social networking sites and positive indicators (self-esteem and life satisfaction) were close to 0, whereas those between time spent on social networking sites and negative indicators (depression and loneliness) were weak. The effects of publication outlet, site on which users spent time, scale of time spent, and participant age and gender were not significant. As most included studies used student samples, future research should be conducted to examine this relationship for adults.

Organic reductants based leaching: A sustainable process for the recovery of valuable metals from spent lithium ion batteries.

PubMed

Chen, Xiangping; Guo, Chunxiu; Ma, Hongrui; Li, Jiazhu; Zhou, Tao; Cao, Ling; Kang, Duozhi

2018-05-01

It is significant to recover metal values from spent lithium ion batteries (LIBs) for the alleviation or prevention of potential risks towards environmental pollution and public health, as well as for the conservation of valuable metals. Herein a hydrometallurgical process was proposed to explore the possibility for the leaching of different metals from waste cathodic materials (LiCoO 2 ) of spent LIBs using organics as reductant in sulfuric acid medium. According to the leaching results, about 98% Co and 96% Li can be leached under the optimal experimental conditions of reaction temperature - 95 °C, reaction time - 120 min, reductive agent dosage - 0.4 g/g, slurry density - 25 g/L, concentration of sulfuric acid-3 mol/L in H 2 SO 4  + glucose leaching system. Similar results (96% Co and 100% Li) can be obtained in H 2 SO 4  + sucrose leaching system under optimized leaching conditions. Despite a complete leaching of Li (∼100%), only 54% Co can be dissolved in the H 2 SO 4  + cellulose leaching system under optimized leaching conditions. Finally, different characterization methods, including UV-Vis, FT-IR, SEM and XRD, were employed for the tentative exploration of reductive leaching reactions using organic as reductant in sulfuric acid medium. All the leaching and characterization results confirm that both glucose and sucrose are effective reductants during leaching, while cellulose should be further degraded to organics with low molecular weights to achieve a satisfactory leaching performance. Copyright © 2018 Elsevier Ltd. All rights reserved.

Brewer’s spent grain and corn steep liquor as alternative culture medium substrates for proteinase production by Streptomyces malaysiensis AMT-3

PubMed Central

do Nascimento, Rodrigo Pires; Junior, Nelson Alves; Coelho, Rosalie Reed Rodrigues

2011-01-01

Brewer’s spent grain and corn steep liquor or yeast extract were used as the sole organic forms for proteinase production by Streptomyces malaysiensis in submerged fermentation. The influence of the C and N concentrations, as well as the incubation periods, were assessed. Eight proteolytic bands were detected through gelatin-gel-electrophoresis in the various extracts obtained from the different media and after different incubation periods, with apparent molecular masses of 20, 35, 43, 50, 70, 100, 116 and 212 kDa. The results obtained suggest an opportunity for exploring this alternative strategy for proteinases production by actinomycetes, using BSG and CSL as economically feasible substrates. PMID:24031767

Polyamines and their biosynthetic enzymes during somatic embryo development in red spruce (Picea rubens Sarg.)

Treesearch

Rakesh Minocha; Subhash C. Minocha; Stephanie Long

2004-01-01

The major objective of this study was to determine if the observed changes in polyamines and their biosynthetic enzymes during somatic embryo development were specifically related to either the stage of the embryo development or to the duration of time spent on the maturation medium. Somatic embryos of red spruce (Picea rubens) at different...

In this medium close-up view, captured by an Electronic Still Camera (ESC), the Spartan 207

NASA Technical Reports Server (NTRS)

1996-01-01

STS-77 ESC VIEW --- In this medium close-up view, captured by an Electronic Still Camera (ESC), the Spartan 207 free-flyer is held in the grasp of the Space Shuttle Endeavour's Remote Manipulator System (RMS) following its re-capture on May 21, 1996. The six-member crew has spent a portion of the early stages of the mission in various activities involving the Spartan 207 and the related Inflatable Antenna Experiment (IAE). The Spartan project is managed by NASA's Goddard Space Flight Center (GSFC) for NASA's Office of Space Science, Washington, D.C. GMT: 09:38:05.

Determinants of children's use of and time spent in fast-food and full-service restaurants.

PubMed

McIntosh, Alex; Kubena, Karen S; Tolle, Glen; Dean, Wesley; Kim, Mi-Jeong; Jan, Jie-Sheng; Anding, Jenna

2011-01-01

Identify parental and children's determinants of children's use of and time spent in fast-food (FF) and full-service (FS) restaurants. Analysis of cross-sectional data. Parents were interviewed by phone; children were interviewed in their homes. Parents and children ages 9-11 or 13-15 from 312 families were obtained via random-digit dialing. Dependent variables were the use of and the time spent in FF and FS restaurants by children. Determinants included parental work schedules, parenting style, and family meal ritual perceptions. Logistic regression was used for multivariate analysis of use of restaurants. Least squares regression was used for multivariate analysis of time spent in restaurants. Significance set at P < .05. Factors related to use of and time spent in FF and FS restaurants included parental work schedules, fathers' use of such restaurants, and children's time spent in the family automobile. Parenting style, parental work, parental eating habits and perceptions of family meals, and children's other uses of their time influence children's use of and time spent in FF and FS restaurants. Copyright © 2011 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

COBRA-SFS thermal-hydraulic analysis code for spent fuel storage and transportation casks: Models and methods

DOE PAGES

Michener, Thomas E.; Rector, David R.; Cuta, Judith M.

2017-09-01

COBRA-SFS, a thermal-hydraulics code developed for steady-state and transient analysis of multi-assembly spent-fuel storage and transportation systems, has been incorporated into the Used Nuclear Fuel-Storage, Transportation and Disposal Analysis Resource and Data System tool as a module devoted to spent fuel package thermal analysis. This paper summarizes the basic formulation of the equations and models used in the COBRA-SFS code, showing that COBRA-SFS fully captures the important physical behavior governing the thermal performance of spent fuel storage systems, with internal and external natural convection flow patterns, and heat transfer by convection, conduction, and thermal radiation. Of particular significance is themore » capability for detailed thermal radiation modeling within the fuel rod array.« less

COBRA-SFS thermal-hydraulic analysis code for spent fuel storage and transportation casks: Models and methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michener, Thomas E.; Rector, David R.; Cuta, Judith M.

COBRA-SFS, a thermal-hydraulics code developed for steady-state and transient analysis of multi-assembly spent-fuel storage and transportation systems, has been incorporated into the Used Nuclear Fuel-Storage, Transportation and Disposal Analysis Resource and Data System tool as a module devoted to spent fuel package thermal analysis. This paper summarizes the basic formulation of the equations and models used in the COBRA-SFS code, showing that COBRA-SFS fully captures the important physical behavior governing the thermal performance of spent fuel storage systems, with internal and external natural convection flow patterns, and heat transfer by convection, conduction, and thermal radiation. Of particular significance is themore » capability for detailed thermal radiation modeling within the fuel rod array.« less

Microbial effects on colloidal agglomeration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hersman, L.

1995-11-01

Colloidal particles are known to enhance the transport of radioactive metals through soil and rock systems. This study was performed to determine if a soil microorganism, isolated from the surface samples collected at Yucca Mountain, NV, could affect the colloidal properties of day particles. The agglomeration of a Wyoming bentonite clay in a sterile uninoculated microbial growth medium was compared to the agglomeration in the medium inoculated with a Pseudomonas sp. In a second experiment, microorganisms were cultured in the succinate medium for 50 h and removed by centrifugation. The agglomeration of the clay in this spent was compared tomore » sterile uninoculated medium. In both experiments, the agglomeration of the clay was greater than that of the sterile, uninoculated control. Based on these results, which indicate that this microorganism enhanced the agglomeration of the bentonite clay, it is possible to say that in the presence of microorganisms colloidal movement through a rock matrix could be reduced because of an overall increase in the size of colloidal particle agglomerates. 32 refs.« less

Production of a solid fuel using sewage sludge and spent cooking oil by immersion frying.

PubMed

Wu, Zhonghua; Zhang, Jing; Li, Zhanyong; Xie, Jian; Mujumdar, Arun S

2012-12-01

Sewage sludge and spent cooking oil are two main waste sources of modern Chinese cities. In this paper, the immersion frying method using spent cooking oil as the heating medium was applied to dry and convert wet sewage sludge into a solid fuel. The drying and oil uptake curves were plotted to demonstrate the fry-drying characteristics of the sewage sludge. Parametric studies were carried out to identify the governing parameters in the frying drying operation. It was found that at frying oil temperatures of 140-160°C, the wet sewage sludge could be dried completely in 6-9 min and converted into a solid fuel with a high calorific value of 21.55-24.08 MJ/kg. The fuel structure, chemical components, pyrolysis and combustion characteristics were investigated and the experimental results showed the solid fuel had a porous internal structure and a low ignition temperature of 250°C due to presence of oil. The frying drying mechanism was also discussed. Copyright © 2012 Elsevier B.V. All rights reserved.

Ultrasound-assisted production of biodiesel and ethanol from spent coffee grounds.

PubMed

Rocha, Maria Valderez Ponte; de Matos, Leonardo José Brandão Lima; Lima, Larissa Pinto de; Figueiredo, Pablo Marciano da Silva; Lucena, Izabelly Larissa; Fernandes, Fabiano André Narciso; Gonçalves, Luciana Rocha Barros

2014-09-01

This study evaluates the production of biodiesel and ethanol from spent coffee grounds (SCG). The extraction of oil from SCG, biodiesel production and ethanol production processes were studied. The liquid-to-solid ratio and temperature were evaluated in the ultrasound-assisted extraction of the oil from SCG. The highest yield (12%) was obtained using 4 mL g(-1) liquid-to-solid ratio at 60°C for 45 min. The process to produce biodiesel showed a yield of 97% into fatty acid methyl esters (FAME). The highest glucose yield (192 mg g SCG(-1)) was obtained by hydrolysis with 0.4 mol L(-1) sulfuric acid at 121°C for 15 min. The hydrolysate was used as fermentation medium for ethanol production by Saccharomyces cerevisiae obtaining 19.0 g L(-1) at 10h of process of ethanol with a yield of ethanol and productivity of 0.50 g g(-1) and 1.90 g L(-1)h(-1), respectively. Spent coffee grounds were considered a potential feedstock for biodiesel and ethanol production. Copyright © 2014 Elsevier Ltd. All rights reserved.

Interactions between Benthic Copepods, Bacteria and Diatoms Promote Nitrogen Retention in Intertidal Marine Sediments

PubMed Central

Stock, Willem; Heylen, Kim; Sabbe, Koen; Willems, Anne; De Troch, Marleen

2014-01-01

The present study aims at evaluating the impact of diatoms and copepods on microbial processes mediating nitrate removal in fine-grained intertidal sediments. More specifically, we studied the interactions between copepods, diatoms and bacteria in relation to their effects on nitrate reduction and denitrification. Microcosms containing defaunated marine sediments were subjected to different treatments: an excess of nitrate, copepods, diatoms (Navicula sp.), a combination of copepods and diatoms, and spent medium from copepods. The microcosms were incubated for seven and a half days, after which nutrient concentrations and denitrification potential were measured. Ammonium concentrations were highest in the treatments with copepods or their spent medium, whilst denitrification potential was lowest in these treatments, suggesting that copepods enhance dissimilatory nitrate reduction to ammonium over denitrification. We hypothesize that this is an indirect effect, by providing extra carbon for the bacterial community through the copepods' excretion products, thus changing the C/N ratio in favour of dissimilatory nitrate reduction. Diatoms alone had no effect on the nitrogen fluxes, but they did enhance the effect of copepods, possibly by influencing the quantity and quality of the copepods' excretion products. Our results show that small-scale biological interactions between bacteria, copepods and diatoms can have an important impact on denitrification and hence sediment nitrogen fluxes. PMID:25360602

Study concerning the recovery of zinc and manganese from spent batteries by hydrometallurgical processes.

PubMed

Buzatu, Traian; Popescu, Gabriela; Birloaga, Ionela; Săceanu, Simona

2013-03-01

Used batteries contain numerous metals in high concentrations and if not disposed of with proper care, they can negatively affect our environment. These metals represent 83% of all spent batteries and therefore it is important to recover metals such as Zn and Mn, and reuse them for the production of new batteries. The recovery of Zn and Mn from used batteries, in particular from Zn-C and alkaline ones has been researched using hydrometallurgical methods. After comminution and classification of elemental components, the electrode paste resulting from these processes was treated by chemical leaching. Prior to the leaching process the electrode paste has been subjected to two washing steps, in order to remove the potassium, which is an inconvenient element in this type of processes. To simultaneously extract Zn and Mn from this paste, the leaching method in alkaline medium (NaOH solution) and acid medium (sulphuric acid solution) was used. Also, to determine the efficiency of extraction of Zn and Mn from used batteries, the following variables were studied: reagents concentration, S/L ratio, temperature, time. The best results for extraction yield of Zn and Mn were obtained under acid leaching conditions (2M H2SO4, 1h, 80°C). Copyright © 2012 Elsevier Ltd. All rights reserved.

Evaluation of Physarum polycephalum plasmodial growth and lipid production using rice bran as a carbon source.

PubMed

Tran, Hanh; Stephenson, Steven; Pollock, Erik

2015-08-01

The myxomycete Physarum polycephalum appears to have remarkable potential as a lipid source for biodiesel production. The present study evaluated the use of rice bran as a carbon source and determined the medium components for optimum growth and lipid production for this organism. Optimization of medium components by response surface methodology showed that rice bran and yeast extract had significant influences on lipid and biomass production. The optimum medium consisted of 37.5 g/L rice bran, 0.79 g/L yeast extract and 12.5 g/L agar, and this yielded 7.5 g/L dry biomass and 0.9 g/L lipid after 5 days. The biomass and lipid production profiles revealed that these parameters increased over time and reached their maximum values (10.5 and 1.26 g/L, respectively) after 7 days. Physarum polycephalum growth decreased on the spent medium but using the latter increased total biomass and lipid concentrations to 14.3 and 1.72 g/L, respectively. An effective method for inoculum preparation was developed for biomass and lipid production by P. polycephalum on a low-cost medium using rice bran as the main carbon source. These results also demonstrated the feasibility of scaling up and reusing the medium for additional biomass and lipid production.

Advancing the Fork detector for quantitative spent nuclear fuel verification

DOE PAGES

Vaccaro, S.; Gauld, I. C.; Hu, J.; ...

2018-01-31

The Fork detector is widely used by the safeguards inspectorate of the European Atomic Energy Community (EURATOM) and the International Atomic Energy Agency (IAEA) to verify spent nuclear fuel. Fork measurements are routinely performed for safeguards prior to dry storage cask loading. Additionally, spent fuel verification will be required at the facilities where encapsulation is performed for acceptance in the final repositories planned in Sweden and Finland. The use of the Fork detector as a quantitative instrument has not been prevalent due to the complexity of correlating the measured neutron and gamma ray signals with fuel inventories and operator declarations.more » A spent fuel data analysis module based on the ORIGEN burnup code was recently implemented to provide automated real-time analysis of Fork detector data. This module allows quantitative predictions of expected neutron count rates and gamma units as measured by the Fork detectors using safeguards declarations and available reactor operating data. This study describes field testing of the Fork data analysis module using data acquired from 339 assemblies measured during routine dry cask loading inspection campaigns in Europe. Assemblies include both uranium oxide and mixed-oxide fuel assemblies. More recent measurements of 50 spent fuel assemblies at the Swedish Central Interim Storage Facility for Spent Nuclear Fuel are also analyzed. An evaluation of uncertainties in the Fork measurement data is performed to quantify the ability of the data analysis module to verify operator declarations and to develop quantitative go/no-go criteria for safeguards verification measurements during cask loading or encapsulation operations. The goal of this approach is to provide safeguards inspectors with reliable real-time data analysis tools to rapidly identify discrepancies in operator declarations and to detect potential partial defects in spent fuel assemblies with improved reliability and minimal false positive alarms. Finally, the results are summarized, and sources and magnitudes of uncertainties are identified, and the impact of analysis uncertainties on the ability to confirm operator declarations is quantified.« less

Advancing the Fork detector for quantitative spent nuclear fuel verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaccaro, S.; Gauld, I. C.; Hu, J.

The Fork detector is widely used by the safeguards inspectorate of the European Atomic Energy Community (EURATOM) and the International Atomic Energy Agency (IAEA) to verify spent nuclear fuel. Fork measurements are routinely performed for safeguards prior to dry storage cask loading. Additionally, spent fuel verification will be required at the facilities where encapsulation is performed for acceptance in the final repositories planned in Sweden and Finland. The use of the Fork detector as a quantitative instrument has not been prevalent due to the complexity of correlating the measured neutron and gamma ray signals with fuel inventories and operator declarations.more » A spent fuel data analysis module based on the ORIGEN burnup code was recently implemented to provide automated real-time analysis of Fork detector data. This module allows quantitative predictions of expected neutron count rates and gamma units as measured by the Fork detectors using safeguards declarations and available reactor operating data. This study describes field testing of the Fork data analysis module using data acquired from 339 assemblies measured during routine dry cask loading inspection campaigns in Europe. Assemblies include both uranium oxide and mixed-oxide fuel assemblies. More recent measurements of 50 spent fuel assemblies at the Swedish Central Interim Storage Facility for Spent Nuclear Fuel are also analyzed. An evaluation of uncertainties in the Fork measurement data is performed to quantify the ability of the data analysis module to verify operator declarations and to develop quantitative go/no-go criteria for safeguards verification measurements during cask loading or encapsulation operations. The goal of this approach is to provide safeguards inspectors with reliable real-time data analysis tools to rapidly identify discrepancies in operator declarations and to detect potential partial defects in spent fuel assemblies with improved reliability and minimal false positive alarms. Finally, the results are summarized, and sources and magnitudes of uncertainties are identified, and the impact of analysis uncertainties on the ability to confirm operator declarations is quantified.« less

Advancing the Fork detector for quantitative spent nuclear fuel verification

NASA Astrophysics Data System (ADS)

Vaccaro, S.; Gauld, I. C.; Hu, J.; De Baere, P.; Peterson, J.; Schwalbach, P.; Smejkal, A.; Tomanin, A.; Sjöland, A.; Tobin, S.; Wiarda, D.

2018-04-01

The Fork detector is widely used by the safeguards inspectorate of the European Atomic Energy Community (EURATOM) and the International Atomic Energy Agency (IAEA) to verify spent nuclear fuel. Fork measurements are routinely performed for safeguards prior to dry storage cask loading. Additionally, spent fuel verification will be required at the facilities where encapsulation is performed for acceptance in the final repositories planned in Sweden and Finland. The use of the Fork detector as a quantitative instrument has not been prevalent due to the complexity of correlating the measured neutron and gamma ray signals with fuel inventories and operator declarations. A spent fuel data analysis module based on the ORIGEN burnup code was recently implemented to provide automated real-time analysis of Fork detector data. This module allows quantitative predictions of expected neutron count rates and gamma units as measured by the Fork detectors using safeguards declarations and available reactor operating data. This paper describes field testing of the Fork data analysis module using data acquired from 339 assemblies measured during routine dry cask loading inspection campaigns in Europe. Assemblies include both uranium oxide and mixed-oxide fuel assemblies. More recent measurements of 50 spent fuel assemblies at the Swedish Central Interim Storage Facility for Spent Nuclear Fuel are also analyzed. An evaluation of uncertainties in the Fork measurement data is performed to quantify the ability of the data analysis module to verify operator declarations and to develop quantitative go/no-go criteria for safeguards verification measurements during cask loading or encapsulation operations. The goal of this approach is to provide safeguards inspectors with reliable real-time data analysis tools to rapidly identify discrepancies in operator declarations and to detect potential partial defects in spent fuel assemblies with improved reliability and minimal false positive alarms. The results are summarized, and sources and magnitudes of uncertainties are identified, and the impact of analysis uncertainties on the ability to confirm operator declarations is quantified.

A preliminary cost analysis of the biotreatment of refinery spent-sulfidic caustic.

PubMed

Sublette, K L

1997-01-01

Caustics are used in petroleum refining to remove hydrogen sulfide from various hydrocarbon streams. Spent-sulfidic caustics from three refineries have been successfully biotreated on the bench and pilot scale, resulting in neutralization and removal of active Sulfides. Sulfides were completely oxidized to sulfate by Thiobacillus denitrificans strain F. Microbial oxidation of sulfide produced acid, which at least partially neutralized the caustic. A commercial-scale treatment system has been designed that features a bioreactor with a suspended culture of flocculated T. denitrificans, a settler and acid and nutrient storage and delivery systems. A cost analysis has been performed for nine cases representing a range of spent caustic sulfide and hydroxide concentrations at a base treatment rate of 10 gpm. This analysis shows that refinery spent-sulfidic caustic can be biotreated for 4-8.3 cent/gal.

Method for the production of cementitious compositions and aggregate derivatives from said compositions, and cementitious compositions and aggregates produced thereby

DOEpatents

Minnick, L. John

1983-01-01

The present invention relates to a method for preparing synthetic shaped cementitious compositions having high quality even without the addition of high energy binders, such as portland cement, through the use of the spent residue from a fluidized combustion bed of the type wherein limestone particles are suspended in a fluidized medium and sulfur oxides are captured, and pulverized coal fly ash.

In-Field Performance Testing of the Fork Detector for Quantitative Spent Fuel Verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauld, Ian C.; Hu, Jianwei; De Baere, P.

Expanding spent fuel dry storage activities worldwide are increasing demands on safeguards authorities that perform inspections. The European Atomic Energy Community (EURATOM) and the International Atomic Energy Agency (IAEA) require measurements to verify declarations when spent fuel is transferred to difficult-to-access locations, such as dry storage casks and the repositories planned in Finland and Sweden. EURATOM makes routine use of the Fork detector to obtain gross gamma and total neutron measurements during spent fuel inspections. Data analysis is performed by modules in the integrated Review and Analysis Program (iRAP) software, developed jointly by EURATOM and the IAEA. Under the frameworkmore » of the US Department of Energy–EURATOM cooperation agreement, a module for automated Fork detector data analysis has been developed by Oak Ridge National Laboratory (ORNL) using the ORIGEN code from the SCALE code system and implemented in iRAP. EURATOM and ORNL recently performed measurements on 30 spent fuel assemblies at the Swedish Central Interim Storage Facility for Spent Nuclear Fuel (Clab), operated by the Swedish Nuclear Fuel and Waste Management Company (SKB). The measured assemblies represent a broad range of fuel characteristics. Neutron count rates for 15 measured pressurized water reactor assemblies are predicted with an average relative standard deviation of 4.6%, and gamma signals are predicted on average within 2.6% of the measurement. The 15 measured boiling water reactor assemblies exhibit slightly larger deviations of 5.2% for the gamma signals and 5.7% for the neutron count rates, compared to measurements. These findings suggest that with improved analysis of the measurement data, existing instruments can provide increased verification of operator declarations of the spent fuel and thereby also provide greater ability to confirm integrity of an assembly. These results support the application of the Fork detector as a fully quantitative spent fuel verification technique.« less

Growth factor expression pattern of homologous feeder layer for culturing buffalo embryonic stem cell-like cells.

PubMed

Sharma, Ruchi; George, Aman; Kamble, Nitin M; Chauhan, Manmohan S; Singla, Suresh; Manik, Radhey S; Palta, Prabhat

2012-01-01

The present study examined the expression profile of buffalo fetal fibroblasts (BFF) used as a feeder layer for embryonic stem (ES) cell-like cells. The expression of important growth factors was detected in cells at different passages. Mitomycin-C inactivation increased relative expression levels of ACTIVIN-A, TGF-β1, BMP-4 and GREMLIN but not of fibroblast growth factor-2 (FGF-2). The expression level of ACTIVIN-A, transforming growth factor-β1 (TGF-β1), bone morphogenetic protein-4 (BMP-4) and FGF-2 was similar in buffalo fetal fibroblast (BFF) cultured in stem cell medium (SCM), SCM+1000IU mL(-1) leukemia inhibitory factor (LIF), SCM+5 ngmL(-1) FGF-2 or SCM+LIF+FGF-2 for 24 h whereas GREMLIN expression was higher in FGF-2-supplemented groups. In spent medium, the concentration of ACTIVIN-A was higher in FGF-2-supplemented groups whereas that of TGF-β1 was similar in SCM and LIF+FGF-2, which was higher than when either LIF or FGF-2 was used alone. Following culture of ES cell-like cells on a feeder layer for 24 h, the TGF-β1 concentration was higher with LIF+FGF-2 than with LIF or FGF-2 alone which, in turn, was higher than that in SCM. In the LIF+FGF-2 group, the concentration of TGF-β1 was lower and that of ACTIVIN-A was higher in spent medium at 24 h than at 48 h of culture. These results suggest that BFF produce signalling molecules that may help in self-renewal of buffalo ES cell-like cells.

Leaching of metals from end-of-life solar cells.

PubMed

Chakankar, Mital; Su, Chun Hui; Hocheng, Hong

2018-04-10

The issue of recycling waste solar cells is critical with regard to the expanded use of these cells, which increases waste production. Technology establishment for this recycling process is essential with respect to the valuable and hazardous metals present therein. In the present study, the leaching potentials of Acidithiobacillus thiooxidans, Acidithiobacillus ferrooxidans, Penicillium chrysogenum, and Penicillium simplicissimum were assessed for the recovery of metals from spent solar cells, with a focus on retrieval of the valuable metal Te. Batch experiments were performed to explore and compare the metal removal efficiencies of the aforementioned microorganisms using spent media. P. chrysogenum spent medium was found to be most effective, recovering 100% of B, Mg, Si, V, Ni, Zn, and Sr along with 93% of Te at 30 °C, 150 rpm and 1% (w/v) pulp density. Further optimization of the process parameters increased the leaching efficiency, and 100% of Te was recovered at the optimum conditions of 20 °C, 200 rpm shaking speed and 1% (w/v) pulp density. In addition, the recovery of aluminum increased from 31 to 89% upon process optimization. Thus, the process has considerable potential for metal recovery and is environmentally beneficial.

Biotreatment of refinery spent-sulfidic caustic using an enrichment culture immobilized in a novel support matrix.

PubMed

Conner, J A; Beitle, R R; Duncan, K; Kolhatkar, R; Sublette, K L

2000-01-01

Sodium hydroxide solutions are used in petroleum refining to remove hydrogen sulfide (H2S) and mercaptans from various hydrocarbon streams. The resulting sulfide-laden waste stream is called spent-sulfidic caustic. An aerobic enrichment culture was previously developed using a gas mixture of H2S and methyl-mercaptan (MeSH) as the sole energy source. This culture has now been immobilized in a novel support matrix, DuPont BIO-SEP beads, and is used to bio-treat a refinery spent-sulfidic caustic containing both inorganic sulfide and mercaptans in a continuous flow, fluidized-bed column bioreactor. Complete oxidation of both inorganic and organic sulfur to sulfate was observed with no breakthrough of H2S and < 2 ppmv of MeSH produced in the bioreactor outlet gas. Excessive buildup of sulfate (> 12 g/L) in the bioreactor medium resulted in an upset condition evidenced by excessive MeSH breakthrough. Therefore, bioreactor performance was limited by the steady-state sulfate concentration. Further improvement in volumetric productivity of a bioreactor system based on this enrichment culture will be dependent on maintenance of sulfate concentrations below inhibitory levels.

Combined Effects of Time Spent in Physical Activity, Sedentary Behaviors and Sleep on Obesity and Cardio-Metabolic Health Markers: A Novel Compositional Data Analysis Approach

PubMed Central

Chastin, Sebastien F. M.; Palarea-Albaladejo, Javier; Dontje, Manon L.; Skelton, Dawn A.

2015-01-01

The associations between time spent in sleep, sedentary behaviors (SB) and physical activity with health are usually studied without taking into account that time is finite during the day, so time spent in each of these behaviors are codependent. Therefore, little is known about the combined effect of time spent in sleep, SB and physical activity, that together constitute a composite whole, on obesity and cardio-metabolic health markers. Cross-sectional analysis of NHANES 2005–6 cycle on N = 1937 adults, was undertaken using a compositional analysis paradigm, which accounts for this intrinsic codependence. Time spent in SB, light intensity (LIPA) and moderate to vigorous activity (MVPA) was determined from accelerometry and combined with self-reported sleep time to obtain the 24 hour time budget composition. The distribution of time spent in sleep, SB, LIPA and MVPA is significantly associated with BMI, waist circumference, triglycerides, plasma glucose, plasma insulin (all p<0.001), and systolic (p<0.001) and diastolic blood pressure (p<0.003), but not HDL or LDL. Within the composition, the strongest positive effect is found for the proportion of time spent in MVPA. Strikingly, the effects of MVPA replacing another behavior and of MVPA being displaced by another behavior are asymmetric. For example, re-allocating 10 minutes of SB to MVPA was associated with a lower waist circumference by 0.001% but if 10 minutes of MVPA is displaced by SB this was associated with a 0.84% higher waist circumference. The proportion of time spent in LIPA and SB were detrimentally associated with obesity and cardiovascular disease markers, but the association with SB was stronger. For diabetes risk markers, replacing SB with LIPA was associated with more favorable outcomes. Time spent in MVPA is an important target for intervention and preventing transfer of time from LIPA to SB might lessen the negative effects of physical inactivity. PMID:26461112

Demonstration of acid and water recovery systems: Applicability and operational challenges in Indian metal finishing SMEs.

PubMed

Balakrishnan, M; Batra, R; Batra, V S; Chandramouli, G; Choudhury, D; Hälbig, T; Ivashechkin, P; Jain, J; Mandava, K; Mense, N; Nehra, V; Rögener, F; Sartor, M; Singh, V; Srinivasan, M R; Tewari, P K

2018-07-01

Diffusion dialysis, acid retardation and nanofiltration plants were acquired from Europe and demonstrated in several Indian metal finishing companies over a three year period. These companies are primarily small and medium enterprises (SMEs). Free acid recovery rate from spent pickling baths using diffusion dialysis and retardation was in the range of 78-86% and 30-70% respectively. With nanofiltration, 80% recovery rate of rinse water was obtained. The demonstrations created awareness among the metal finishing companies to reuse resources (acid/water) from the effluent streams. However, lack of efficient oil separators, reliable chemical analysis and trained personnel as well as high investment cost limit the application of these technologies. Local manufacturing, plant customization and centralized treatment are likely to encourage the uptake of such technologies in the Indian metal finishing sector. Copyright © 2018 Elsevier Ltd. All rights reserved.

10 CFR 72.240 - Conditions for spent fuel storage cask reapproval.

Code of Federal Regulations, 2011 CFR

2011-01-01

... has been determined by the NRC. The application must be accompanied by a safety analysis report (SAR). The new SAR may reference the SAR originally submitted for the approved spent fuel storage cask design. (c) The design of a spent fuel storage cask will be reapproved if the conditions in § 72.238 are met...

The Effect of Information Level on Human-Agent Interaction for Route Planning

DTIC Science & Technology

2015-12-01

13 Fig. 4 Experiment 1 shows regression results for time spent at DP predicting posttest trust group membership for the high LOI...decision time by pretest trust group membership. Bars denote standard error (SE). DT at DP was evaluated to see if it predicted posttest trust... group . Linear regression indicated that DT at DP was not a significant predictor of posttest trust for the Low or the Medium LOI conditions; however, it

Bioleaching of rare earth elements from monazite sand.

PubMed

Brisson, Vanessa L; Zhuang, Wei-Qin; Alvarez-Cohen, Lisa

2016-02-01

Three fungal strains were found to be capable of bioleaching rare earth elements from monazite, a rare earth phosphate mineral, utilizing the monazite as a phosphate source and releasing rare earth cations into solution. These organisms include one known phosphate solubilizing fungus, Aspergillus niger ATCC 1015, as well as two newly isolated fungi: an Aspergillus terreus strain ML3-1 and a Paecilomyces spp. strain WE3-F. Although monazite also contains the radioactive element Thorium, bioleaching by these fungi preferentially solubilized rare earth elements over Thorium, leaving the Thorium in the solid residual. Adjustments in growth media composition improved bioleaching performance measured as rare earth release. Cell-free spent medium generated during growth of A. terreus strain ML3-1 and Paecilomyces spp. strain WE3-F in the presence of monazite leached rare earths to concentrations 1.7-3.8 times those of HCl solutions of comparable pH, indicating that compounds exogenously released by these organisms contribute substantially to leaching. Organic acids released by the organisms included acetic, citric, gluconic, itaconic, oxalic, and succinic acids. Abiotic leaching with laboratory prepared solutions of these acids was not as effective as bioleaching or leaching with cell-free spent medium at releasing rare earths from monazite, indicating that compounds other than the identified organic acids contribute to leaching performance. © 2015 Wiley Periodicals, Inc.

Inhibitory Effect of Enterococcus faecium WB2000 on Volatile Sulfur Compound Production by Porphyromonas gingivalis

PubMed Central

Higuchi, Takuya; Nakajima, Masato; Fujimoto, Akie; Hanioka, Takashi; Hirofuji, Takao

2016-01-01

Volatile sulfur compounds (VSCs) produced by oral anaerobes are the major compounds responsible for oral malodor. Enterococcus faecium WB2000 is recognized as an antiplaque probiotic bacterium. In this study, the effect of E. faecium WB2000 on VSC production by Porphyromonas gingivalis was evaluated, and the mechanism of inhibition of oral malodor was investigated. P. gingivalis ATCC 33277 was cultured in the presence of four lactic acid bacteria, including E. faecium WB2000. Subsequently, P. gingivalis ATCC 33277, W50, W83, and two clinical isolates were cultured in the presence or absence of E. faecium WB2000, and the emission of VSCs from spent culture medium was measured by gas chromatography. The number of P. gingivalis ATCC 33277 in mixed culture with E. faecium WB2000 decreased at 6 h, and the rate of decrease was higher than that in mixed cultures with the other lactic acid bacteria. The numbers of five P. gingivalis strains decreased at similar rates in mixed culture with E. faecium WB2000. The concentration of methyl mercaptan was lower in spent culture medium from P. gingivalis and E. faecium WB2000 cultures compared with that from P. gingivalis alone. Therefore, E. faecium WB2000 may reduce oral malodor by inhibiting the growth of P. gingivalis and neutralizing methyl mercaptan. PMID:27799940

The influence of spent household batteries to the organic fraction of municipal solid wastes during composting.

PubMed

Komilis, Dimitrios; Bandi, Dimitra; Kakaronis, Georgios; Zouppouris, Georgios

2011-06-01

The objective of this work was to investigate the potential transfer of 9 heavy metals from spent household batteries (zinc-carbon and alkaline-manganese batteries) to the organic fraction of municipal solid wastes during active composting. Six runs were performed including one control and 2 replications. Eleven types of alkaline and non-alkaline batteries were added at 3 different levels to the organic fraction of municipal solid wastes, namely at percentages equal to 0.98% w/w (low), 5.2% w/w (medium) and 10.6% w/w (high). Experiments were performed in 230 l insulated plastic aerobic bioreactors under a dynamic air flow regime for up to 60 days. Iron, copper and nickel masses contained in the organic fraction of the wastes were found significantly higher in the high level runs compared to the corresponding masses in the control. No metal transfer was obtained in the low and medium level runs. Metal mass balance closures ranged from 51% to 176%. Metals' concentrations in the leachates were below 10 mg l⁻¹ for most metals, except iron, while an increasing concentration trend versus time was measured in the leachates of the high level runs. In all cases, the contents of 5 regulated heavy metals in all end products were below the Hellenic limits. Copyright © 2011 Elsevier B.V. All rights reserved.

76 FR 17037 - List of Approved Spent Fuel Storage Casks: HI-STORM Flood/Wind Addition

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-28

...-0007] RIN 3150-AI90 List of Approved Spent Fuel Storage Casks: HI-STORM Flood/Wind Addition AGENCY... or the Commission) is proposing to amend its spent fuel storage cask regulations to add the HI-STORM...: June 13, 2011. SAR Submitted by: Holtec International, Inc. SAR Title: Safety Analysis Report on the HI...

Prevalence and socio-demographic correlates of time spent cooking by adults in the 2005 UK Time Use Survey. Cross-sectional analysis.

PubMed

Adams, Jean; White, Martin

2015-09-01

This study aimed to document the prevalence and socio-demographic correlates of time spent cooking by adults in the 2005 UK Time-Use Survey. Respondents reported their main activities, in 10 minute slots, throughout one 24 hour period. Activities were coded into 30 pre-defined codes, including 'cooking, washing up'. Four measures of time spent cooking were calculated: any time spent cooking, 30 continuous minutes spent cooking, total time spent cooking, and longest continuous time spent cooking. Socio-demographic correlates were: age, employment, social class, education, and number of adults and children in the household. Analyses were stratified by gender. Data from 4214 participants were included. 85% of women and 60% of men spent any time cooking; 60% of women and 33% of men spent 30 continuous minutes cooking. Amongst women, older age, not being in employment, lower social class, greater education, and living with other adults or children were positively associated with time cooking. Few differences in time spent cooking were seen in men. Socio-economic differences in time spent cooking may have been overstated as a determinant of socio-economic differences in diet, overweight and obesity. Gender was a stronger determinant of time spent cooking than other socio-demographic variables. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Evaluation of Time Spent by Pharmacists and Nurses Based on the Location of Pharmacist Involvement in Medication History Collection.

PubMed

Chhabra, Anmol; Quinn, Andrea; Ries, Amanda

2018-01-01

Accurate history collection is integral to medication reconciliation. Studies support pharmacy involvement in the process, but assessment of global time spent is limited. The authors hypothesized the location of a medication-focused interview would impact time spent. The objective was to compare time spent by pharmacists and nurses based on the location of a medication-focused interview. Time spent by the interviewing pharmacist, admitting nurse, and centralized pharmacist verifying admission orders was collected. Patient groups were based on whether the interview was conducted in the emergency department (ED) or medical floor. The primary end point was a composite of the 3 time points. Secondary end points were individual time components and number and types of transcription discrepancies identified during medical floor interviews. Pharmacists and nurses spent an average of ten fewer minutes per ED patient versus a medical floor patient ( P = .028). Secondary end points were not statistically significant. Transcription discrepancies were identified at a rate of 1 in 4 medications. Post hoc analysis revealed the time spent by pharmacists and nurses was 2.4 minutes shorter per medication when interviewed in the ED ( P < .001). The primary outcome was statistically and clinically significant. Limitations included inability to blind and lack of cost-saving analysis. Pharmacist involvement in ED medication reconciliation leads to time savings during the admission process.

Physical game demands in elite rugby union: a global positioning system analysis and possible implications for rehabilitation.

PubMed

Coughlan, Garrett F; Green, Brian S; Pook, Paul T; Toolan, Eoin; O'Connor, Sean P

2011-08-01

Descriptive. To evaluate the physical demands of an international Rugby Union-level game using a global positioning system (GPS). Elite Rugby Union teams currently employ the latest technology to monitor and evaluate physical demands of training and games on their players. GPS data from 2 players, a back and a forward, were collected during an international Rugby Union game. Locomotion speed, total body load, and body load sustained in tackles and scrums were analyzed. Players completed an average distance of 6715 m and spent the major portion of the game standing or walking, interspersed with medium- and high-intensity running activities. The back performed a higher number of high-intensity sprints and reached a greater maximal speed. Body load data revealed that high levels of gravitational force are sustained in tackling and scrum tasks. The current study provides a detailed GPS analysis of the physical demands of international Rugby Union players. These data, when combined with game video footage, may assist sports medicine professionals in understanding the demands of the game and mechanism of injury, as well as improving injury rehabilitation.

Iron- and 4-hydroxy-2-alkylquinoline-containing periplasmic inclusion bodies of Pseudomonas aeruginosa: A chemical analysis

USGS Publications Warehouse

Royt, P.W.; Honeychuck, R.V.; Pant, R.R.; Rogers, M.L.; Asher, L.V.; Lloyd, J.R.; Carlos, W.E.; Belkin, H.E.; Patwardhan, S.

2007-01-01

Dark aggregated particles were seen on pellets of iron-rich, mid-logarithmic phase Pseudomonas aeruginosa. Transmission electron microscopy of these cells showed inclusion bodies in periplasmic vacuoles. Aggregated particles isolated from the spent medium of these cells contained iron as indicated by atomic absorption spectroscopy and by electron paramagnetic resonance spectroscopy that revealed Fe3+. Scanning electron microscopy/energy dispersive X-ray analysis of whole cells revealed the presence of iron-containing particles beneath the surface of the cell, indicating that the isolated aggregates were the intracellular inclusion bodies. Collectively, mass spectroscopy and nuclear magnetic resonance spectroscopy of the isolated inclusion bodies revealed the presence of 3,4-dihydroxy-2-heptylquinoline which is the Pseudomonas quinolone signaling compound (PQS) and an iron chelator; 4-hydroxy-2-heptylquinoline (pseudan VII), which is an iron chelator, antibacterial compound and precursor of PQS; 4-hydroxy-2-nonylquinoline (pseudan IX) which is an iron chelator and antibacterial compound; 4-hydroxy-2-methylquinoline (pseudan I), and 4-hydroxy-2-nonylquinoline N-oxide. ?? 2006 Elsevier Inc. All rights reserved.

Age at Menarche and Time Spent in Education: A Mendelian Randomization Study.

PubMed

Gill, D; Del Greco M, F; Rawson, T M; Sivakumaran, P; Brown, A; Sheehan, N A; Minelli, C

2017-09-01

Menarche signifies the primary event in female puberty and is associated with changes in self-identity. It is not clear whether earlier puberty causes girls to spend less time in education. Observational studies on this topic are likely to be affected by confounding environmental factors. The Mendelian randomization (MR) approach addresses these issues by using genetic variants (such as single nucleotide polymorphisms, SNPs) as proxies for the risk factor of interest. We use this technique to explore whether there is a causal effect of age at menarche on time spent in education. Instruments and SNP-age at menarche estimates are identified from a Genome Wide Association Study (GWAS) meta-analysis of 182,416 women of European descent. The effects of instruments on time spent in education are estimated using a GWAS meta-analysis of 118,443 women performed by the Social Science Genetic Association Consortium (SSGAC). In our main analysis, we demonstrate a small but statistically significant causal effect of age at menarche on time spent in education: a 1 year increase in age at menarche is associated with 0.14 years (53 days) increase in time spent in education (95% CI 0.10-0.21 years, p = 3.5 × 10 -8 ). The causal effect is confirmed in sensitivity analyses. In identifying this positive causal effect of age at menarche on time spent in education, we offer further insight into the social effects of puberty in girls.

The composition of intern work while on call.

PubMed

Fletcher, Kathlyn E; Visotcky, Alexis M; Slagle, Jason M; Tarima, Sergey; Weinger, Matthew B; Schapira, Marilyn M

2012-11-01

The work of house staff is being increasingly scrutinized as duty hours continue to be restricted. To describe the distribution of work performed by internal medicine interns while on call. Prospective time motion study on general internal medicine wards at a VA hospital affiliated with a tertiary care medical center and internal medicine residency program. Internal medicine interns. Trained observers followed interns during a "call" day. The observers continuously recorded the tasks performed by interns, using customized task analysis software. We measured the amount of time spent on each task. We calculated means and standard deviations for the amount of time spent on six categories of tasks: clinical computer work (e.g., writing orders and notes), non-patient communication, direct patient care (work done at the bedside), downtime, transit and teaching/learning. We also calculated means and standard deviations for time spent on specific tasks within each category. We compared the amount of time spent on the top three categories using analysis of variance. The largest proportion of intern time was spent in clinical computer work (40 %). Thirty percent of time was spent on non-patient communication. Only 12 % of intern time was spent at the bedside. Downtime activities, transit and teaching/learning accounted for 11 %, 5 % and 2 % of intern time, respectively. Our results suggest that during on call periods, relatively small amounts of time are spent on direct patient care and teaching/learning activities. As intern duty hours continue to decrease, attention should be directed towards preserving time with patients and increasing time in education.

Passive gamma analysis of the boiling-water-reactor assemblies

NASA Astrophysics Data System (ADS)

Vo, D.; Favalli, A.; Grogan, B.; Jansson, P.; Liljenfeldt, H.; Mozin, V.; Schwalbach, P.; Sjöland, A.; Tobin, S.; Trellue, H.; Vaccaro, S.

2016-09-01

This research focused on the analysis of a set of stationary passive gamma measurements taken on the spent nuclear fuel assemblies from a boiling water reactor (BWR) using pulse height analysis data acquisition. The measurements were performed on 25 different BWR assemblies in 2014 at Sweden's Central Interim Storage Facility for Spent Nuclear Fuel (Clab). This study was performed as part of the Next Generation of Safeguards Initiative-Spent Fuel project to research the application of nondestructive assay (NDA) to spent fuel assemblies. The NGSI-SF team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay (NDA) measurements of spent fuel assemblies: (1) verify the initial enrichment, burnup, and cooling time of facility declaration; (2) detect the diversion or replacement of pins, (3) estimate the plutonium mass, (4) estimate the decay heat, and (5) determine the reactivity of spent fuel assemblies. The final objective of this project is to quantify the capability of several integrated NDA instruments to meet the aforementioned goals using the combined signatures of neutrons, gamma rays, and heat. This report presents a selection of the measured data and summarizes an analysis of the results. Specifically, trends in the count rates measured for spectral lines from the following isotopes were analyzed as a function of the declared burnup and cooling time: 137Cs, 154Eu, 134Cs, and to a lesser extent, 106Ru and 144Ce. From these measured count rates, predictive algorithms were developed to enable the estimation of the burnup and cooling time. Furthermore, these algorithms were benchmarked on a set of assemblies not included in the standard assemblies set used by this research team.

Passive gamma analysis of the boiling-water-reactor assemblies

DOE PAGES

Vo, D.; Favalli, A.; Grogan, B.; ...

2016-09-01

This research focused on the analysis of a set of stationary passive gamma measurements taken on the spent nuclear fuel assemblies from a boiling water reactor (BWR) using pulse height analysis data acquisition. The measurements were performed on 25 different BWR assemblies in 2014 at Sweden’s Central Interim Storage Facility for Spent Nuclear Fuel (Clab). This study was performed as part of the Next Generation of Safeguards Initiative–Spent Fuel project to research the application of nondestructive assay (NDA) to spent fuel assemblies. The NGSI–SF team is working to achieve the following technical goals more easily and efficiently than in themore » past using nondestructive assay (NDA) measurements of spent fuel assemblies: (1) verify the initial enrichment, burnup, and cooling time of facility declaration; (2) detect the diversion or replacement of pins, (3) estimate the plutonium mass, (4) estimate the decay heat, and (5) determine the reactivity of spent fuel assemblies. The final objective of this project is to quantify the capability of several integrated NDA instruments to meet the aforementioned goals using the combined signatures of neutrons, gamma rays, and heat. This report presents a selection of the measured data and summarizes an analysis of the results. Specifically, trends in the count rates measured for spectral lines from the following isotopes were analyzed as a function of the declared burnup and cooling time: 137Cs, 154Eu, 134Cs, and to a lesser extent, 106Ru and 144Ce. From these measured count rates, predictive algorithms were developed to enable the estimation of the burnup and cooling time. Furthermore, these algorithms were benchmarked on a set of assemblies not included in the standard assemblies set used by this research team.« less

Generation of PHB from Spent Sulfite Liquor Using Halophilic Microorganisms.

PubMed

Weissgram, Michaela; Gstöttner, Janina; Lorantfy, Bettina; Tenhaken, Raimund; Herwig, Christoph; Weber, Hedda K

2015-06-08

Halophilic microorganisms thrive at elevated concentrations of sodium chloride up to saturation and are capable of growing on a wide variety of carbon sources like various organic acids, hexose and also pentose sugars. Hence, the biotechnological application of these microorganisms can cover many aspects, such as the treatment of hypersaline waste streams of different origin. Due to the fact that the high osmotic pressure of hypersaline environments reduces the risk of contamination, the capacity for cost-effective non-sterile cultivation can make extreme halophilic microorganisms potentially valuable organisms for biotechnological applications. In this contribution, the stepwise use of screening approaches, employing design of experiment (DoE) on model media and subsequently using industrial waste as substrate have been implemented to investigate the applicability of halophiles to generate PHB from the industrial waste stream spent sulfite liquor (SSL). The production of PHB on model media as well as dilutions of industrial substrate in a complex medium has been screened for by fluorescence microscopy using Nile Blue staining. Screening was used to investigate the ability of halophilic microorganisms to withstand the inhibiting substances of the waste stream without negatively affecting PHB production. It could be shown that neither single inhibiting substances nor a mixture thereof inhibited growth in the investigated range, hence, leaving the question on the inhibiting mechanisms open. However, it could be demonstrated that some haloarchaea and halophilic bacteria are able to produce PHB when cultivated on 3.3% w/w dry matter spent sulfite liquor, whereas H. halophila was even able to thrive on 6.6% w/w dry matter spent sulfite liquor and still produce PHB.

Impact of Nuclear Data Uncertainties on Calculated Spent Fuel Nuclide Inventories and Advanced NDA Instrument Response

DOE PAGES

Hu, Jianwei; Gauld, Ian C.

2014-12-01

The U.S. Department of Energy’s Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) project is nearing the final phase of developing several advanced nondestructive assay (NDA) instruments designed to measure spent nuclear fuel assemblies for the purpose of improving nuclear safeguards. Current efforts are focusing on calibrating several of these instruments with spent fuel assemblies at two international spent fuel facilities. Modelling and simulation is expected to play an important role in predicting nuclide compositions, neutron and gamma source terms, and instrument responses in order to inform the instrument calibration procedures. As part of NGSI-SF project, this work was carried outmore » to assess the impacts of uncertainties in the nuclear data used in the calculations of spent fuel content, radiation emissions and instrument responses. Nuclear data is an essential part of nuclear fuel burnup and decay codes and nuclear transport codes. Such codes are routinely used for analysis of spent fuel and NDA safeguards instruments. Hence, the uncertainties existing in the nuclear data used in these codes affect the accuracies of such analysis. In addition, nuclear data uncertainties represent the limiting (smallest) uncertainties that can be expected from nuclear code predictions, and therefore define the highest attainable accuracy of the NDA instrument. This work studies the impacts of nuclear data uncertainties on calculated spent fuel nuclide inventories and the associated NDA instrument response. Recently developed methods within the SCALE code system are applied in this study. The Californium Interrogation with Prompt Neutron instrument was selected to illustrate the impact of these uncertainties on NDA instrument response.« less

Impact of Nuclear Data Uncertainties on Calculated Spent Fuel Nuclide Inventories and Advanced NDA Instrument Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Jianwei; Gauld, Ian C.

The U.S. Department of Energy’s Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) project is nearing the final phase of developing several advanced nondestructive assay (NDA) instruments designed to measure spent nuclear fuel assemblies for the purpose of improving nuclear safeguards. Current efforts are focusing on calibrating several of these instruments with spent fuel assemblies at two international spent fuel facilities. Modelling and simulation is expected to play an important role in predicting nuclide compositions, neutron and gamma source terms, and instrument responses in order to inform the instrument calibration procedures. As part of NGSI-SF project, this work was carried outmore » to assess the impacts of uncertainties in the nuclear data used in the calculations of spent fuel content, radiation emissions and instrument responses. Nuclear data is an essential part of nuclear fuel burnup and decay codes and nuclear transport codes. Such codes are routinely used for analysis of spent fuel and NDA safeguards instruments. Hence, the uncertainties existing in the nuclear data used in these codes affect the accuracies of such analysis. In addition, nuclear data uncertainties represent the limiting (smallest) uncertainties that can be expected from nuclear code predictions, and therefore define the highest attainable accuracy of the NDA instrument. This work studies the impacts of nuclear data uncertainties on calculated spent fuel nuclide inventories and the associated NDA instrument response. Recently developed methods within the SCALE code system are applied in this study. The Californium Interrogation with Prompt Neutron instrument was selected to illustrate the impact of these uncertainties on NDA instrument response.« less

Medium-Throughput Screen of Microbially Produced Serotonin via a G-Protein-Coupled Receptor-Based Sensor.

PubMed

Ehrenworth, Amy M; Claiborne, Tauris; Peralta-Yahya, Pamela

2017-10-17

Chemical biosensors, for which chemical detection triggers a fluorescent signal, have the potential to accelerate the screening of noncolorimetric chemicals produced by microbes, enabling the high-throughput engineering of enzymes and metabolic pathways. Here, we engineer a G-protein-coupled receptor (GPCR)-based sensor to detect serotonin produced by a producer microbe in the producer microbe's supernatant. Detecting a chemical in the producer microbe's supernatant is nontrivial because of the number of other metabolites and proteins present that could interfere with sensor performance. We validate the two-cell screening system for medium-throughput applications, opening the door to the rapid engineering of microbes for the increased production of serotonin. We focus on serotonin detection as serotonin levels limit the microbial production of hydroxystrictosidine, a modified alkaloid that could accelerate the semisynthesis of camptothecin-derived anticancer pharmaceuticals. This work shows the ease of generating GPCR-based chemical sensors and their ability to detect specific chemicals in complex aqueous solutions, such as microbial spent medium. In addition, this work sets the stage for the rapid engineering of serotonin-producing microbes.

Father involvement moderates the effect of maternal depression during a child's infancy on child behavior problems in kindergarten.

PubMed

Mezulis, Amy H; Hyde, Janet Shibley; Clark, Roseanne

2004-12-01

This research investigated whether father involvement in infancy may reduce or exacerbate the well-established adverse effect of maternal depression during a child's infancy on behavior problems in childhood. In a community sample (N = 350), the authors found that fathers' self-reported parenting styles interacted with the amount of time fathers spent caring for their infants to moderate the longitudinal effect of maternal depression during the child's infancy on children's internalizing, but not externalizing, behaviors. Low to medium amounts of high-warmth father involvement and high amounts of medium- or high-control father involvement at this time were associated with lower child internalizing behaviors. Paternal depression during a child's infancy exacerbated the effect of maternal depression, but this moderating effect was limited to depressed fathers spending medium to high amounts of time caring for their infants. Results emphasize the moderating role fathers may play in reducing or exacerbating the adverse long-term effects of maternal depression during a child's infancy on later child behavior problems. ((c) 2004 APA, all rights reserved).

Silica adsorbent prepared from spent diatomaceous earth and its application to removal of dye from aqueous solution.

PubMed

Tsai, W T; Hsien, K J; Yang, J M

2004-07-15

The objective of this work is to study the activation regeneration of spent diatomaceous earth (SDE) for the preparation of silica adsorbents using thermal regeneration and acid/alkaline activation methods. Under the experimental conditions investigated, it was found that the alkaline activation method carried out by sodium hydroxide under controlled conditions is significantly superior to other heat and activation methods. The porosities of solids thus obtained are over 0.2, indicating that they are basically mesoporous. The optimal porous material thus prepared was used as a mineral adsorbent for methylene blue at 25 degrees C. The adsorption equilibrium revealed that the silica adsorbent can take up over 50 mg/g at relatively low concentrations in aqueous medium from the fittings of Langmuir and Freundlich isotherms with high correlations. On the other hand, the adsorption kinetic of methylene blue under various adsorbent dosages can be well described with a pseudo-second-order reaction model. Copyright 2004 Elsevier Inc.

Carbon dioxide assisted sustainability enhancement of pyrolysis of waste biomass: A case study with spent coffee ground.

PubMed

Cho, Dong-Wan; Cho, Seong-Heon; Song, Hocheol; Kwon, Eilhann E

2015-01-01

This work mainly presents the influence of CO2 as a reaction medium in the thermo-chemical process (pyrolysis) of waste biomass. Our experimental work mechanistically validated two key roles of CO2 in pyrolysis of biomass. For example, CO2 expedited the thermal cracking of volatile organic compounds (VOCs) evolved from the thermal degradation of spent coffee ground (SCG) and reacted with VOCs. This enhanced thermal cracking behavior and reaction triggered by CO2 directly led to the enhanced generation of CO (∼ 3000%) in the presence of CO2. As a result, this identified influence of CO2 also directly led to the substantial decrease (∼ 40-60%) of the condensable hydrocarbons (tar). Finally, the morphologic change of biochar was distinctive in the presence of CO2. Therefore, a series of the adsorption experiments with dye were conducted to preliminary explore the physico-chemical properties of biochar induced by CO2. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reductive smelting of spent lead-acid battery colloid sludge in a molten Na2CO3 salt

NASA Astrophysics Data System (ADS)

Hu, Yu-jie; Tang, Chao-bo; Tang, Mo-tang; Chen, Yong-ming

2015-08-01

Lead extraction from spent lead-acid battery paste in a molten Na2CO3 salt containing ZnO as a sulfur-fixing agent was studied. Some influencing factors, including smelting temperature, reaction time, ZnO and salt dosages, were investigated in detail using single-factor experiments. The optimum conditions were determined as follows: T = 880°C; t = 60 min; Na2CO3/paste mass ratio = 2.8:1; and the ZnO dosage is equal to the stoichiometric requirement. Under the optimum conditions, the direct recovery rate of lead reached 98.14%. The results suggested that increases in temperature and salt dosage improved the direct recovery rate of lead. XRD results and thermodynamic calculations indicated that the reaction approaches of lead and sulfur were PbSO4→Pb and PbSO4→ZnS, respectively. Sulfur was fixed in the form of ZnS, whereas the molten salt did not react with other components, serving only as a reaction medium.

NetGirls: the Internet, Facebook, and body image concern in adolescent girls.

PubMed

Tiggemann, Marika; Slater, Amy

2013-09-01

The primary aim of the study was to examine the relationship between Internet exposure and body image concern in adolescent girls, with a particular focus on the social networking site of Facebook. A sample of 1,087 girls in the first two years (Years 8 and 9) of high school (aged 13-15 years) completed questionnaire measures of Internet consumption and body image concerns. The overwhelming majority of girls (95.9%) had access to the Internet in their home. Time spent on the Internet was significantly related to internalization of the thin ideal, body surveillance, and drive for thinness. Further, 75% of the girls had a Facebook profile, and spent an average of 1.5 hours there daily. Facebook users scored significantly more highly on all body image concern measures than non-users. It was concluded that the Internet represents a potent socio-cultural medium of relevance to the body image of adolescent girls. Copyright © 2013 Wiley Periodicals, Inc.

Translation and Validation of the Nomophobia Questionnaire in the Italian Language: Exploratory Factor Analysis

PubMed Central

Argumosa-Villar, Lidia; Boada-Grau, Joan; Vigil-Colet, Andreu; Yildirim, Caglar; Del Puente, Giovanni; Watad, Abdulla

2018-01-01

Background Nomophobia, which is a neologism derived from the combination of “no mobile,” “phone,” and “phobia” is considered to be a modern situational phobia and indicates a fear of feeling disconnected. Objective No psychometric scales are available in Italian for investigating such a construct. We therefore planned a translation and validation study of the Nomophobia Questionnaire (NMP-Q), which is an instrument developed by Yildirim and Correia. Subjects were recruited via an online survey using a snowball approach. Methods The NMP-Q was translated from English into Italian using a classical “backwards and forwards” procedure. In order to explore the underlying factor structure of the translated questionnaire, an exploratory factor analysis was carried out. A principal component analysis approach with varimax rotation was performed. Multivariate regression analyses were computed to shed light on the psychological predictors of nomophobia. Results A sample of 403 subjects volunteered to take part in the study. The average age of participants was 27.91 years (standard deviation 8.63) and the sample was comprised of 160 males (160/403, 39.7%) and 243 females (243/403, 60.3%). Forty-five subjects spent less than 1 hour on their mobile phone per day (45/403, 11.2%), 94 spent between 1 and 2 hours (94/403, 23.3%), 69 spent between 2 and 3 hours (69/403, 17.1%), 58 spent between 3 and 4 hours (58/403, 14.4%), 48 spent between 4 and 5 hours (48/403, 11.9%), 29 spent between 5 and 7 hours (29/403, 7.2%), 36 spent between 7 and 9 hours (36/403, 8.9%), and 24 spent more than 10 hours (24/403, 6.0%). The eigenvalues and scree plot supported a 3-factorial nature of the translated questionnaire. The NMP-Q showed an overall Cronbach alpha coefficient of 0.95 (0.94, 0.89, and 0.88 for the three factors). The first factor explained up to 23.32% of the total variance, while the second and third factors explained up to 23.91% and 18.67% of the variance, respectively. The total NMP-Q score correlated with the number of hours spent on a mobile phone. Conclusions The Italian version of the NMP-Q proved to be reliable. PMID:29358161

United States Air Force Shale Oil to Fuels. Phase II.

DTIC Science & Technology

1981-11-01

and modified so that any off-gas from the LPS, stripper column, product drums, spent caustic drums, and sample ports would be sent to the caustic ...product, or in the spent caustic . After the desalted Paraho shale oil was processed in Production Run No. 2, the catalyst bed was flushed with light cycle...58 20 First-Stage Hydrotreating of Occidental Shale Oil -- Spent Catalyst Analysis - Run 1 ....... 59 21 First-Stage Hydrotreating of Occidental

Measurement and analysis of gamma-rays emitted from spent nuclear fuel above 3 MeV.

PubMed

Rodriguez, Douglas C; Anderson, Elaina; Anderson, Kevin K; Campbell, Luke W; Fast, James E; Jarman, Kenneth; Kulisek, Jonathan; Orton, Christopher R; Runkle, Robert C; Stave, Sean

2013-12-01

The gamma-ray spectrum of spent nuclear fuel in the 3-6 MeV energy range is important for active interrogation since gamma rays emitted from nuclear decay are not expected to interfere with measurements in this energy region. There is, unfortunately, a dearth of empirical measurements from spent nuclear fuel in this region. This work is an initial attempt to partially fill this gap by presenting an analysis of gamma-ray spectra collected from a set of spent nuclear fuel sources using a high-purity germanium detector array. This multi-crystal array possesses a large collection volume, providing high energy resolution up to 16 MeV. The results of these measurements establish the continuum count-rate in the energy region between 3 and 6 MeV. Also assessed is the potential for peaks from passive emissions to interfere with peak measurements resulting from active interrogation delayed emissions. As one of the first documented empirical measurements of passive emissions from spent fuel for energies above 3 MeV, this work provides a foundation for active interrogation model validation and detector development. © 2013 Elsevier Ltd. All rights reserved.

Simultaneous leaching of Pt, Pd and Rh from automotive catalytic converters in chloride-containing solutions

NASA Astrophysics Data System (ADS)

Hasani, M.; Khodadadi, A.; Koleini, S. M. J.; Saeedi, A. H.; Meléndez, A. M.

2017-01-01

Dissolution of platinum group metals (PGM; herein Pt, Pd and Rh) in different chloride-based leaching systems from spent auto catalysts was performed. Response surface methodology and a five-level-five-factor central composite design were used to evaluate the effects of 1) temperature, 2) liquid-to-solid ratio, 3) stirring speed, 4) acid concentration and 5) particle size on extraction yield of PGM by aqua regia. Analysis of variance was used to determine the optimum conditions and most significant factors affecting the overall metal extraction. In the optimum conditions, leaching of Pt, Pd and Rh was 91.58%, 93.49% and 60.15%, respectively. The effect of different oxidizing agents on the PGM dissolution in chloride medium was studied comparatively in the following leaching systems: a) aqua regia/sulfuric acid mixture, b) hydrogen peroxide in sulfuric acid (piranha solution), c) sodium hypochlorite and d) copper(II). Dissolution of Rh is increased in both aqua regia and hydrogen peroxide/hydrochloric acid solutions by adding sulfuric acid.

The Comprehensive Benefit Evaluation of Take Shared Bicycles as Connecting to Public Transit

NASA Astrophysics Data System (ADS)

Zhang, J. Y.; Sun, H.; Li, P. F.; Li, C. C.

2017-10-01

Shared bicycles as an important way of connecting public transport, have few literature to evaluate its effectiveness.This paper taking Beijing city as an example, make anevaluationfor the six types of travel combinations which are commonly used by the citizens. The author selects four quantitative indicators: fuel consumption, economic cost, total time spent, and CO2 emission. And two qualitative indicators: degree of comfort and convenience. The relative efficiency of quantitative indicators is obtained by data envelopment analysis (DEA) and fuzzification and then take fuzzy synthetic evaluation with qualitative indicators.It was found that the choice of shared bicycles +subway+ shared bicycles and shared bicycles has good comprehensive benefits in medium distance travel. The findings also suggest that shared bicycles +subway+ shared bicycles is the best choice in the utilitarian trips. The conclusions not only provide suggestions for the travellers to select travel modes, but also can adjust the relevant factors to increase the proportion of green travel.

Aqueous Extract Composition of Spent Ginger (Zingiber officinale var. Amarum) from Essential Oil Distillation

NASA Astrophysics Data System (ADS)

Manuhara, G. J.; Mentari, G. P.; Khasanah, L. U.; Utami, R.

2018-03-01

Ginger (Zingiber officinale var Amarum) is widely used as raw material for essential oil production in Indonesia and contain high functional compounds. After producing essential oil, distillation leave less valuable spent ginger. This research was conducted to determine the bioactive compounds remained in aqueous extract of the spent ginger. The extracts were produced at various combination of temperature (55, 75, 95°C) and duration (15, 30, 45 minutes). The extract composition was observed using Gas Chromatography - Mass Spectrometry analysis. The temperature and time of maceration extraction affected the content of compounds in spent ginger aqueous extracts. The extracts contained four largest components of α-curcumene, α-zingiberene, β-sesquiphellandrene and β-bisabolene. The aqueous extracts from spent ginger contained the compounds which may contribute to distinctive flavor of ginger and also bioactive function.

Generation of PHB from Spent Sulfite Liquor Using Halophilic Microorganisms

PubMed Central

Weissgram, Michaela; Gstöttner, Janina; Lorantfy, Bettina; Tenhaken, Raimund; Herwig, Christoph; Weber, Hedda K.

2015-01-01

Halophilic microorganisms thrive at elevated concentrations of sodium chloride up to saturation and are capable of growing on a wide variety of carbon sources like various organic acids, hexose and also pentose sugars. Hence, the biotechnological application of these microorganisms can cover many aspects, such as the treatment of hypersaline waste streams of different origin. Due to the fact that the high osmotic pressure of hypersaline environments reduces the risk of contamination, the capacity for cost-effective non-sterile cultivation can make extreme halophilic microorganisms potentially valuable organisms for biotechnological applications. In this contribution, the stepwise use of screening approaches, employing design of experiment (DoE) on model media and subsequently using industrial waste as substrate have been implemented to investigate the applicability of halophiles to generate PHB from the industrial waste stream spent sulfite liquor (SSL). The production of PHB on model media as well as dilutions of industrial substrate in a complex medium has been screened for by fluorescence microscopy using Nile Blue staining. Screening was used to investigate the ability of halophilic microorganisms to withstand the inhibiting substances of the waste stream without negatively affecting PHB production. It could be shown that neither single inhibiting substances nor a mixture thereof inhibited growth in the investigated range, hence, leaving the question on the inhibiting mechanisms open. However, it could be demonstrated that some haloarchaea and halophilic bacteria are able to produce PHB when cultivated on 3.3% w/w dry matter spent sulfite liquor, whereas H. halophila was even able to thrive on 6.6% w/w dry matter spent sulfite liquor and still produce PHB. PMID:27682089

A comparison of workplace safety perceptions among financial decision-makers of medium- vs. large-size companies.

PubMed

Huang, Yueng-Hsiang; Leamon, Tom B; Courtney, Theodore K; Chen, Peter Y; DeArmond, Sarah

2011-01-01

This study, through a random national survey in the U.S., explored how corporate financial decision-makers perceive important workplace safety issues as a function of the size of the company for which they worked (medium- vs. large-size companies). Telephone surveys were conducted with 404 U.S. corporate financial decision-makers: 203 from medium-size companies and 201 from large companies. Results showed that the patterns of responding for participants from medium- and large-size companies were somewhat similar. The top-rated safety priorities in resource allocation reported by participants from both groups were overexertion, repetitive motion, and bodily reaction. They believed that there were direct and indirect costs associated with workplace injuries and for every dollar spent improving workplace safety, more than four dollars would be returned. They perceived the top benefits of an effective safety program to be predominately financial in nature - increased productivity and reduced costs - and the safety modification participants mentioned most often was to have more/better safety-focused training. However, more participants from large- than medium-size companies reported that "falling on the same level" was the major cause of workers' compensation loss, which is in line with industry loss data. Participants from large companies were more likely to see their safety programs as better than those of other companies in their industries, and those of medium-size companies were more likely to mention that there were no improvements needed for their companies. Copyright © 2009 Elsevier Ltd. All rights reserved.

Safety assessment methodology in management of spent sealed sources.

PubMed

Mahmoud, Narmine Salah

2005-02-14

Environmental hazards can be caused from radioactive waste after their disposal. It was therefore important that safety assessment methodologies be developed and established to study and estimate the possible hazards, and institute certain safety methodologies that lead and prevent the evolution of these hazards. Spent sealed sources are specific type of radioactive waste. According to IAEA definition, spent sealed sources are unused sources because of activity decay, damage, misuse, loss, or theft. Accidental exposure of humans from spent sealed sources can occur at the moment they become spent and before their disposal. Because of that reason, safety assessment methodologies were tailored to suit the management of spent sealed sources. To provide understanding and confidence of this study, validation analysis was undertaken by considering the scenario of an accident that occurred in Egypt, June 2000 (the Meet-Halfa accident from an iridium-192 source). The text of this work includes consideration related to the safety assessment approaches of spent sealed sources which constitutes assessment context, processes leading an active source to be spent, accident scenarios, mathematical models for dose calculations, and radiological consequences and regulatory criteria. The text also includes a validation study, which was carried out by evaluating a theoretical scenario compared to the real scenario of Meet-Halfa accident depending on the clinical assessment of affected individuals.

Bioleaching of spent Ni-Cd batteries by continuous flow system: effect of hydraulic retention time and process load.

PubMed

Zhao, Ling; Yang, Dong; Zhu, Nan-Wen

2008-12-30

Spent Ni-Cd batteries bring a severe environmental problem that needs to be solved urgently. A novel continuous flow two-step leaching system based on bioleaching was introduced to dissolve heavy metals in batteries. It consists of an acidifying reactor which was used to culture indigenous thiobacilli and a leaching reactor which was used to leach metals from spent batteries. The indigenous acidophilic thiobacilli in sewage sludge was used as the microorganisms and the sludge itself as culture medium. Bioleaching tests at different hydraulic retention time (HRT) and process load in the leaching reactor were performed. The results showed that the longer the HRT (1, 3, 6, 9 and 15 days) was, the more time required to achieve the complete leaching of Ni, Cd and Co. The maximum dissolution of cadmium and cobalt was achieved at higher pH values (3.0-4.5) while the leaching of nickel hydroxide and nickel in metallic form (Ni0) were obtained separately in different acidity (pH 2.5-3.5). It cost about 25, 30 and more than 40 days to remove all of the three heavy metals with the process load of two, four and eight Ni-Cd batteries under the conditions that the ingoing bio-sulphuric acid was 1Ld(-1) and HRT was 3 days.

Motion analysis in the field of dentistry: a kinematic comparison of dentists and orthodontists

PubMed Central

Nowak, J; Erbe, C; Hauck, I; Groneberg, D A; Hermanns, I; Ellegast, R; Ditchen, D; Ohlendorf, D

2016-01-01

Objectives To conduct a kinematic comparison of occupational posture in orthodontists and dentists in their workplace. Design Observational study. Setting Dentist surgeries and departments of orthodontics at university medical centres in Germany. Participants A representative sample of 21 (10 female, 11 male) dentists (group G1) and 21 (13 female, 8 male) orthodontists (G2) with one male dropout in G2. Outcome measures The CUELA (computer-assisted acquisition and long-term analysis of musculoskeletal loads) system was used to analyse occupational posture. Parallel to the recording through the CUELA system, a software-supported analysis of the activities performed (I: treatment; II: office; III: other activities) was carried out. In line with ergonomic standards the measured body angles are categorised into neutral, moderate and awkward postures. Activities between the aforementioned groups are compared using the stratified van Elteren U test and the Wilcoxon–Mann–Whitney U test. All p values are subject to the Bonferroni–Holm correction. The level of significance is set at 5%. Results The percentage of time spent on activities in categories I–II–III was as follows: dentists 41%–23%–36% and orthodontists 28%–37%–35%. The posture analysis of both groups showed, for all percentiles (P5–95), angle values primarily in the neutral or moderate range. However, depending on the activity performed, between 5% and 25% of working hours were spent in unfavourable postures, especially in the head-and-neck area. Orthodontists have a greater tendency than dentists to perform treatment activities with the head and torso in unfavourable positions. The statistically significant differences between the two groups with regard to the duration and the relevance of the activities performed confirm this assumption for all three categories (p<0.01, p<0.05). Conclusions Generally, both groups perform treatment activities in postures that are in the neutral or medium range; however, dentists had slightly more unfavourable postures during treatment for a greater share of their work day. PMID:27531728

Motion analysis in the field of dentistry: a kinematic comparison of dentists and orthodontists.

PubMed

Nowak, J; Erbe, C; Hauck, I; Groneberg, D A; Hermanns, I; Ellegast, R; Ditchen, D; Ohlendorf, D

2016-08-16

To conduct a kinematic comparison of occupational posture in orthodontists and dentists in their workplace. Observational study. Dentist surgeries and departments of orthodontics at university medical centres in Germany. A representative sample of 21 (10 female, 11 male) dentists (group G1) and 21 (13 female, 8 male) orthodontists (G2) with one male dropout in G2. The CUELA (computer-assisted acquisition and long-term analysis of musculoskeletal loads) system was used to analyse occupational posture. Parallel to the recording through the CUELA system, a software-supported analysis of the activities performed (I: treatment; II: office; III: other activities) was carried out. In line with ergonomic standards the measured body angles are categorised into neutral, moderate and awkward postures. Activities between the aforementioned groups are compared using the stratified van Elteren U test and the Wilcoxon-Mann-Whitney U test. All p values are subject to the Bonferroni-Holm correction. The level of significance is set at 5%. The percentage of time spent on activities in categories I-II-III was as follows: dentists 41%-23%-36% and orthodontists 28%-37%-35%. The posture analysis of both groups showed, for all percentiles (P5-95), angle values primarily in the neutral or moderate range. However, depending on the activity performed, between 5% and 25% of working hours were spent in unfavourable postures, especially in the head-and-neck area. Orthodontists have a greater tendency than dentists to perform treatment activities with the head and torso in unfavourable positions. The statistically significant differences between the two groups with regard to the duration and the relevance of the activities performed confirm this assumption for all three categories (p<0.01, p<0.05). Generally, both groups perform treatment activities in postures that are in the neutral or medium range; however, dentists had slightly more unfavourable postures during treatment for a greater share of their work day. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Dietary intake, physical activity and energy expenditure of Malaysian adolescents.

PubMed

Zalilah, M S; Khor, G L; Mirnalini, K; Norimah, A K; Ang, M

2006-06-01

Paediatric obesity is a public health concern worldwide as it can track into adulthood and increase the risk of adult morbidity and mortality. While the aetiology of obesity is multi-factorial, the roles of diet and physical activity are controversial. Thus, the purpose of this study was to report on the differences in energy intake, diet composition, time spent doing physical activity and energy expenditure among underweight (UW), normal weight (NW) and at-risk of overweight (OW) Malaysian adolescents (317 females and 301 males) aged 11-15 years. This was a cross-sectional study with 6,555 adolescents measured for weights and heights for body mass index (BMI) categorisation. A total of 618 subjects were randomly selected from each BMI category according to gender. The subjects' dietary intake and physical activity were assessed using self-reported three-day food and activity records, respectively. Dietary intake components included total energy and macronutrient intakes. Energy expenditure was calculated as a sum of energy expended for basal metabolic rate and physical activity. Time spent (in minutes) in low, medium and high intensity activities was also calculated. The OW adolescents had the highest crude energy intake and energy expenditure. However, after adjusting for body weight, the OW subjects had the lowest energy intake and energy expenditure (p-value is less than 0.001). The study groups did not differ significantly in time spent for low, medium and high intensity activities. Macronutrient intakes differed significantly only among the girls where the OW group had the highest intakes compared to UW and NW groups (p-value is less than 0.05). All study groups had greater than 30 percent and less than 55 percent of energy intake from fat and carbohydrate, respectively. The data suggested that a combination of low energy expenditure adjusted for body weight and high dietary fat intake may be associated with overweight and obesity among adolescents. To prevent overweight and obesity among children and adolescents, strategies that address eating behaviours and physical activity are required. Various segments of the society must be involved in efforts to promote healthful dietary intakes and active lifestyle in children and adolescents.

Regional variations in pedal cyclist injuries in New Zealand: safety in numbers or risk in scarcity?

PubMed

Tin, Sandar Tin; Woodward, Alistair; Thornley, Simon; Ameratunga, Shanthi

2011-08-01

To assess regional variations in rates of traffic injuries to pedal cyclists resulting in death or hospital inpatient treatment, in relation to time spent cycling and time spent travelling in a car. Cycling injuries were identified from the Mortality Collection and the National Minimum Dataset. Time spent cycling and time spent travelling as a driver or passenger in a car/van/ute/SUV were computed from National Household Travel Surveys. There are 16 census regions in New Zealand, some of which were combined for this analysis to ensure an adequate sample size, resulting in eight regional groups. Analyses were undertaken for 1996-99 and 2003-07. Injury rates, per million hours spent cycling, varied widely across regions (11 to 33 injuries during 1996-99 and 12 to 78 injuries during 2003-07). The injury rate increased with decreasing per capita time spent cycling. The rate also increased with increasing per capita time spent travelling in a car. There was an inverse association between the injury rate and the ratio of time spent cycling to time spent travelling in a car. The expected number of cycling injuries increased with increasing total time spent cycling but at a decreasing rate particularly after adjusting for total time spent travelling in a car. The findings indicate a 'risk in scarcity' effect for New Zealand cyclists such that risk profiles of cyclists are likely to deteriorate if fewer people use a bicycle and more use a car. Cooperative efforts to promote cycling and its safety and to restrict car use may reverse the risk in scarcity effect. © 2011 The Authors. ANZJPH © 2011 Public Health Association of Australia.

Why "Working Smarter" Isn't Working: White-Collar Productivity Improvement.

ERIC Educational Resources Information Center

Shaw, Edward

2001-01-01

Discusses the productivity and work days of white collar workers. Topics include productivity improvement; task analysis; the amount of time spent reading, and how to reduce it by improving writing skills; time spent in meetings; empowered time management; and sustaining a climate for change. (LRW)

Continuum-based DFN-consistent simulations of oxygen ingress in fractured crystalline rocks

NASA Astrophysics Data System (ADS)

Trinchero, P.; Puigdomenech, I.; Molinero, J.; Ebrahimi, H.; Gylling, B.; Svensson, U.; Bosbach, D.; Deissmann, G.

2016-12-01

The potential transient infiltration of oxygenated glacial meltwater into initially anoxic and reducing fractured crystalline rocks during glaciation events is an issue of concern for some of the prospected deep geological repositories for spent nuclear fuel. Here, this problem is assessed using reactive transport calculations. First, a novel parameterisation procedure is presented, where flow, transport and geochemical parameters (i.e. hydraulic conductivity, effective/kinetic porosity, and mineral specific surface and abundance) are defined on a finite volume numerical grid based on the (spatially varying) properties of an underlying Discrete Fracture Network (DFN). Second, using this approach, a realistic reactive transport model of Forsmark, i.e. the selected site for the proposed Swedish spent nuclear fuel repository, is implemented. The model consists of more than 70 million geochemical transport degrees of freedom and simulates the ingress of oxygen-rich water from the recharge area of the domain and its depletion due to reactions with the Fe(II) mineral chlorite. Third, the calculations are solved in the supercomputer JUQUEEN of the Jülich Supercomputing Centre. The results of the simulations show that oxygen infiltrates relatively quickly along fractures and deformation zones until a steady state profile is reached, where geochemical reactions counterbalance advective transport processes. Interestingly, most of the iron-bearing minerals are consumed in the highly conductive zones, where larger mineral surfaces are available for reactions. An analysis based on mineral mass balance shows that the considered rock medium has enough capacity to buffer oxygen infiltration for a long period of time (i.e. some thousand years).

Methamphetamine Use among Homeless Former Foster Youth: The Mediating Role of Social Networks

PubMed Central

Yoshioka-Maxwell, Amanda; Rice, Eric; Rhoades, Harmony; Winetrobe, Hailey

2015-01-01

Objectives Social network analysis can provide added causal insight into otherwise confusing epidemiologic findings in public health research. Although foster care and homelessness are risk factors for methamphetamine use, current research has failed to explicate why homeless youth with foster care experience engage in methamphetamine use at higher rates than other homeless young adults. This study examined the mediating effect of network engagement and time spent homeless on the relationship between foster care experience and recent methamphetamine use among homeless youth in Los Angeles. Methods Egocentric network data from a cross-sectional community-based sample (n = 652) of homeless youth aged 13–25 were collected from drop-in centers in Los Angeles. Questions addressed foster care experience, time spent homeless, methamphetamine use, and perceived drug use in social networks. Path analysis was performed in SAS to examine mediation. Results Controlling for all other variables, results of path analysis regarding recent methamphetamine use indicated a direct effect between foster care experience and recent methamphetamine use (B = .269, t = 2.73, p < .01). However, this direct effect became statistically nonsignificant when time spent homeless and network methamphetamine use were added to the model, and indirect paths from time spent homeless and network methamphetamine use became statistically significant. Conclusions Foster care experience influenced recent methamphetamine use indirectly through time spent homeless and methamphetamine use by network members. Efforts to reduce methamphetamine use should focus on securing stable housing and addressing network interactions among homeless former foster youth. PMID:26146647

The antibacterial activity of chlorhexidine digluconate against Streptococcus mutans biofilms follows sigmoidal patterns.

PubMed

Lee, Dae-Woo; Jung, Ji-Eun; Yang, Yeon-Mi; Kim, Jae-Gon; Yi, Ho-Keun; Jeon, Jae-Gyu

2016-10-01

The aim of this study was to determine the pattern of the antibacterial activity of chlorhexidine digluconate (CHX) against mature Streptococcus mutans biofilms. Streptococcus mutans biofilms were formed on saliva-coated hydroxyapatite discs and then treated with 0-20% CHX, once, three times, or five times (1 min per treatment) during the period of mature biofilm formation (beyond 46 h). After the treatments, the colony-forming unit (CFU) counts of the treated biofilms were determined. The pH values of the spent culture medium were also determined to investigate the change in pH resulting from the antibacterial activity of CHX. The relationships between the concentration of CHX and the CFU counts and the concentration of CHX and culture medium pH, relative to the number of treatments performed, were evaluated using a sigmoidal curve-fitting procedure. The changes in CFU counts and culture medium pH followed sigmoidal curves and were dependent on the concentration of CHX (R 2 = 0.99). The sigmoidal curves were left-shifted with increasing number of treatments. Furthermore, the culture-medium pH of the treated biofilms increased as their CFU counts decreased. The lowest CHX concentration to increase culture-medium pH above the critical pH also decreased as the number of treatments increased. These results may provide fundamental information for selecting the appropriate CHX concentrations to treat S. mutans biofilms. © 2016 Eur J Oral Sci.

In vitro steroid secretion by staged spermatocysts (Sertoli/germ cell units) of dogfish (Squalus acanthias) testis.

PubMed

Cuevas, M E; Callard, G

1992-10-01

Using the dogfish shark (Squalus acanthias) testis model in which different germ cell stages are topographically separated, we previously observed that steroidogenic enzyme activities vary qualitatively and quantitatively during spermatogenesis. To determine whether these data, obtained by radiolabeled tracer analysis of testicular microsomes, accurately predict steroid secretion by intact cultured spermatocysts (germ cell/Sertoli cell units), steroids were radioimmunoassayed directly in spent medium. Steroid output in basal medium was low, but after addition of 25-hydroxycholesterol (25-OH chol, 60 microM), large amounts of progestins (P) and testosterone (T) accumulated. Dehydroepiandrosterone (DHEA), androstenedione (A), and estradiol (E2) were low or nondetectable in the presence or absence of 25-OH chol; however, addition of T (1 microM) as substrate elevated E2 above assay limits. T and P contents of media increased progressively over a 24-hr culture period (Day 1). Replacement and analysis of spent media at 24-hr intervals indicated that secretion was continuous up to 6 days after seeding, although secretory rates (T plus P) and T/P ratios changed with time in culture. Spermatocysts in premeiotic (PrM), meiotic (M), and post-meiotic (PoM) stages all secreted T and P; however, absolute values, T/P ratios, and stage-dependent patterns varied from one experiment to another with no obvious seasonal pattern. Also steroid secretion by staged cysts did not consistently agree with predictions based on steroidogenic enzyme activities measured in earlier cell-free assays, whether or not 25-OH chol was present. This discrepancy was not explained by stage-related patterns of steroid secretion vs retention or by addition of putative in vivo regulators. Agents that elevated P and/or T were dibutyryl cyclic AMP, 1-isobutyl-3-methylxanthine (IBMX), and forskolin, whereas ventral lobe extract and Ca2+ ionophore (A23817) were inhibitory. An autoregulatory feedback loop was indicated by a negative relationship between cyst concentration per well and steroid secretion rate. In contrast to T and P, E2 secretion in the presence of substrate (T, 1 microM) was as predicted from previously determined patterns of aromatase activity (M > PrM > PoM) and increased in response to IBMX. Added [3H]P, [3H]T and [3H]E2 all were extensively metabolized to polar products and P metabolism was stage related (PoM > M > PrM). These data indicate that analysis of free P, T, and E2 in static cyst cultures may underestimate true steroidogenic potential. Assuming further characterization of the system, we conclude that cultured spermatocysts from dogfish testis have potential for studying the multifactorial regulation of steroid synthesis and secretion stage-by-stage during spermatogenesis.

Is excessive online usage a function of medium or activity? An empirical pilot study

PubMed Central

Griffiths, Mark D.; Szabo, Attila

2014-01-01

Aims: The purpose of the study was to seek a better insight into whether the online medium or the online activity was more important in relation to excessive online use. It is not clear whether those people who spend excessive amounts of time on the Internet are engaged in general Internet or whether excessive Internet use is linked to specific activities. Methods: Perceived changes in Internet use habits as function of hypothetical accessibility of favorite sites were investigated in young adults. University students (n = 130, mean age = 20.6 years) who had (on average) spent over 20 hours a week on the Internet for at least nine years completed a survey. The most favored online activities and expected quality of life without Internet access were also investigated. Results: Findings revealed that social networking was by far the most popular online activity, and that lack of access to their preferred online activities would drop by 65% (as measured by perceived Internet usage). Approximately one in six participants (16%) claimed they would not even switch on the computer if access to their favorite online activities were unavailable. In relation to a hypothetical question about the quality of life without Internet access, the responses were normally distributed (rather than skewed). Conclusions: These results show that time spent with Internet activity is not random and/or generalized, but appears more focused. Attraction or addiction on Internet to one or more specific behavior(s) may be a better way forward in the quest for better understanding excessive human behavior in the online environment. PMID:25215216

Synergistic effect of calcium stearate and photo treatment on the rate of biodegradation of low density polyethylene spent saline vials.

PubMed

Carol, D; Karpagam, S; Kingsley, S J; Vincent, S

2012-07-01

The biodegradation of spent saline bottles, a low density polyethylene product (LDPE) by two selected Arthrobacter sp. under in vitro conditions is reported. Chemical and UV pretreatment play a vital role in enhancing the rate of biodegradation. Treated LDPE film exhibits a higher weight loss and density when compared to untreated films. Arthrobacter oxydans and Arthrobacter globiformis grew better in medium containing pretreated film than in medium containing untreated film. The decrease in density and weight loss of LDPE was also more for pretreated film when compared to untreated film indicating the affect of abiotic treatment on mechanical properties of LDPE. The decrease in the absorbance corresponding to carbonyl groups and double bonds that were generated during pretreatment suggest that some of the double bonds were cut by Arthrobacter species. Since Arthrobacter sp. are capable of degrading urea, splitting of urea group were also seen in FTIR spectrum indicating the evidence of biodegradation after microbial incubation. The results indicated that biodegradation rate could be enhanced by exposing LDPE to calcium stearate (a pro-oxidant) which acts as an initiator for the oxidation of the polymers leading to a decrease of molecular weight and formation of hydrophilic group. Therefore, the initial step for biodegradation of many inert polymers depends on a photo-oxidation of those polymers. The application in sufficient details with improved procedures utilizing recombinant microorganism with polymer degradation capacity can lead to a better plastic waste management in biomedical field. The present plastic disposal trend of waste accumulation can be minimized with this promising eco-friendly technique.

Translation and Validation of the Nomophobia Questionnaire in the Italian Language: Exploratory Factor Analysis.

PubMed

Adawi, Mohammad; Bragazzi, Nicola Luigi; Argumosa-Villar, Lidia; Boada-Grau, Joan; Vigil-Colet, Andreu; Yildirim, Caglar; Del Puente, Giovanni; Watad, Abdulla

2018-01-22

Nomophobia, which is a neologism derived from the combination of "no mobile," "phone," and "phobia" is considered to be a modern situational phobia and indicates a fear of feeling disconnected. No psychometric scales are available in Italian for investigating such a construct. We therefore planned a translation and validation study of the Nomophobia Questionnaire (NMP-Q), which is an instrument developed by Yildirim and Correia. Subjects were recruited via an online survey using a snowball approach. The NMP-Q was translated from English into Italian using a classical "backwards and forwards" procedure. In order to explore the underlying factor structure of the translated questionnaire, an exploratory factor analysis was carried out. A principal component analysis approach with varimax rotation was performed. Multivariate regression analyses were computed to shed light on the psychological predictors of nomophobia. A sample of 403 subjects volunteered to take part in the study. The average age of participants was 27.91 years (standard deviation 8.63) and the sample was comprised of 160 males (160/403, 39.7%) and 243 females (243/403, 60.3%). Forty-five subjects spent less than 1 hour on their mobile phone per day (45/403, 11.2%), 94 spent between 1 and 2 hours (94/403, 23.3%), 69 spent between 2 and 3 hours (69/403, 17.1%), 58 spent between 3 and 4 hours (58/403, 14.4%), 48 spent between 4 and 5 hours (48/403, 11.9%), 29 spent between 5 and 7 hours (29/403, 7.2%), 36 spent between 7 and 9 hours (36/403, 8.9%), and 24 spent more than 10 hours (24/403, 6.0%). The eigenvalues and scree plot supported a 3-factorial nature of the translated questionnaire. The NMP-Q showed an overall Cronbach alpha coefficient of 0.95 (0.94, 0.89, and 0.88 for the three factors). The first factor explained up to 23.32% of the total variance, while the second and third factors explained up to 23.91% and 18.67% of the variance, respectively. The total NMP-Q score correlated with the number of hours spent on a mobile phone. The Italian version of the NMP-Q proved to be reliable. ©Mohammad Adawi, Nicola Luigi Bragazzi, Lidia Argumosa-Villar, Joan Boada-Grau, Andreu Vigil-Colet, Caglar Yildirim, Giovanni Del Puente, Abdulla Watad. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 22.01.2018.

10 CFR 72.214 - List of approved spent fuel storage casks.

Code of Federal Regulations, 2012 CFR

2012-01-01

... specified in their Certificates of Compliance. Certificate Number: 1000 SAR Submitted by: General Nuclear Systems, Inc. SAR Title: Topical Safety Analysis Report for the Castor V/21 Cask Independent Spent Fuel... Model Number: CASTOR V/21 Certificate Number: 1002 SAR Submitted by: Nuclear Assurance Corporation SAR...

10 CFR 72.214 - List of approved spent fuel storage casks.

Code of Federal Regulations, 2014 CFR

2014-01-01

... specified in their Certificates of Compliance. Certificate Number: 1000 SAR Submitted by: General Nuclear Systems, Inc. SAR Title: Topical Safety Analysis Report for the Castor V/21 Cask Independent Spent Fuel... Model Number: CASTOR V/21 Certificate Number: 1002 SAR Submitted by: Nuclear Assurance Corporation SAR...

10 CFR 72.214 - List of approved spent fuel storage casks.

Code of Federal Regulations, 2013 CFR

2013-01-01

... specified in their Certificates of Compliance. Certificate Number: 1000 SAR Submitted by: General Nuclear Systems, Inc. SAR Title: Topical Safety Analysis Report for the Castor V/21 Cask Independent Spent Fuel... Model Number: CASTOR V/21 Certificate Number: 1002 SAR Submitted by: Nuclear Assurance Corporation SAR...

Integration of poly-3-(hydroxybutyrate-co-hydroxyvalerate) production by Haloferax mediterranei through utilization of stillage from rice-based ethanol manufacture in India and its techno-economic analysis.

PubMed

Bhattacharyya, Anirban; Jana, Kuntal; Haldar, Saubhik; Bhowmic, Asit; Mukhopadhyay, Ujjal Kumar; De, Sudipta; Mukherjee, Joydeep

2015-05-01

Haloferax mediterranei has potential for economical industrial-scale production of polyhydroxyalkanoate (PHA) as it can utilize cheap carbon sources, has capacity for nonsterile cultivation and allows simple product recovery. Molasses-based Indian distilleries are converting themselves to cereal-based distilleries. Waste stillage (14 l) of rice-based ethanol industry was used for the production of PHA by H. mediterranei in the simple plug-flow reactor configuration of the activated sludge process. Cells utilized stillage and accumulated 63 ± 3 % PHA of dry cell weight and produced 13.12 ± 0.05 g PHA/l. The product yield coefficient was 0.27 while 0.14 g/l h volumetric productivity was reached. Simultaneous lowering of 5-day biochemical oxygen demand and chemical oxygen demand values of stillage by 82 % was attained. The biopolymer was characterized as poly-3-(hydroxybutyrate-co-17.9 mol%-hydroxyvalerate) (PHBV). Directional properties of decanoic acid jointly with temperature-dependent water solubility in decanoic acid were employed for two-step desalination of the spent stillage medium in a cylindrical baffled-tank with an immersed heater and a stirrer holding axial and radial impellers. 99.3 % of the medium salts were recovered and re-used for PHA production. The cost of PHBV was estimated as US$2.05/kg when the annual production was simulated as 1890 tons. Desalination contributed maximally to the overall cost. Technology and cost-analysis demonstrate that PHA production integrated with ethanol manufacture is feasible in India. This study could be the basis for construction of a pilot plant.

Spent Nuclear Fuel Alternative Technology Decision Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shedrow, C.B.

1999-11-29

The Westinghouse Savannah River Company (WSRC) made a FY98 commitment to the Department of Energy (DOE) to recommend a technology for the disposal of aluminum-based spent nuclear fuel (SNF) at the Savannah River Site (SRS). The two technologies being considered, direct co-disposal and melt and dilute, had been previously selected from a group of eleven potential SNF management technologies by the Research Reactor Spent Nuclear Fuel Task Team chartered by the DOE''s Office of Spent Fuel Management. To meet this commitment, WSRC organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies andmore » ultimately provide a WSRC recommendation to DOE on a preferred SNF alternative management technology.« less

Infrared analysis of clay bricks incorporated with spent shea waste from the shea butter industry.

PubMed

Adazabra, A N; Viruthagiri, G; Shanmugam, N

2017-04-15

The peculiar challenge of effective disposing abundant spent shea waste and the excellent compositional variation tolerance of clay material offered an impetus to examine the incorporation of spent shea waste into clay material as an eco-friendly disposal route in making clay bricks. For this purpose, the chemical constituent, mineralogical compositions and thermal behavior of both clay material and spent shea waste were initially characterized from which modelled brick specimens incorporating 5-20 wt% of the waste into the clay material were prepared. The clay material showed high proportions of SiO 2 (52.97 wt%) and Al 2 O 3 (27.10 wt%) indicating their rich kaolinitic content: whereas, the inert nature of spent shea waste was exhibited by their low oxide content. The striking similarities in infrared absorption bands of pristine clay material and clay materials incorporated with 15 wt% of spent shea waste showed that the waste incorporation had no impact on bond formation of the clay bricks. Potential performance benefits of developing bricks from clay material incorporated with spent shea waste included improved fluxing agents, economic sintering and making of sustainable bricks. Consequently, the analytical results authenticate the incorporation of spent shea waste into clay materials for various desired benefits aside being an environmental correct route of its disposal. Copyright © 2017 Elsevier Ltd. All rights reserved.

Can methadone maintenance for heroin-dependent patients retained in general practice reduce criminal conviction rates and time spent in prison?

PubMed Central

Keen, J; Rowse, G; Mathers, N; Campbell, M; Seivewright, N

2000-01-01

A retrospective analysis was made of the criminal records of 57 patients successfully retained in methadone maintenance at two general practices in Sheffield. Their criminal conviction rates and time spent in prison per year were compared for the periods before and after the start of their methadone programme. Overall, patients retained on methadone programmes in the general practices studied had significantly fewer convictions and cautions, and spent significantly less time in prison than they had before the start of treatment. PMID:10695069

Thermoelastic analysis of spent fuel and high level radioactive waste repositories in salt. A semi-analytical solution. [JUDITH

DOE Office of Scientific and Technical Information (OSTI.GOV)

St. John, C.M.

1977-04-01

An underground repository containing heat generating, High Level Waste or Spent Unreprocessed Fuel may be approximated as a finite number of heat sources distributed across the plane of the repository. The resulting temperature, displacement and stress changes may be calculated using analytical solutions, providing linear thermoelasticity is assumed. This report documents a computer program based on this approach and gives results that form the basis for a comparison between the effects of disposing of High Level Waste and Spent Unreprocessed Fuel.

Health gains and financial risk protection afforded by public financing of selected interventions in Ethiopia: an extended cost-effectiveness analysis.

PubMed

Verguet, Stéphane; Olson, Zachary D; Babigumira, Joseph B; Desalegn, Dawit; Johansson, Kjell Arne; Kruk, Margaret E; Levin, Carol E; Nugent, Rachel A; Pecenka, Clint; Shrime, Mark G; Memirie, Solomon Tessema; Watkins, David A; Jamison, Dean T

2015-05-01

The way in which a government chooses to finance a health intervention can affect the uptake of health interventions and consequently the extent of health gains. In addition to health gains, some policies such as public finance can insure against catastrophic health expenditures. We aimed to evaluate the health and financial risk protection benefits of selected interventions that could be publicly financed by the government of Ethiopia. We used extended cost-effectiveness analysis to assess the health gains (deaths averted) and financial risk protection afforded (cases of poverty averted) by a bundle of nine (among many other) interventions that the Government of Ethiopia aims to make universally available. These nine interventions were measles vaccination, rotavirus vaccination, pneumococcal conjugate vaccination, diarrhoea treatment, malaria treatment, pneumonia treatment, caesarean section surgery, hypertension treatment, and tuberculosis treatment. Our analysis shows that, per dollar spent by the Ethiopian Government, the interventions that avert the most deaths are measles vaccination (367 deaths averted per $100,000 spent), pneumococcal conjugate vaccination (170 deaths averted per $100,000 spent), and caesarean section surgery (141 deaths averted per $100,000 spent). The interventions that avert the most cases of poverty are caesarean section surgery (98 cases averted per $100,000 spent), tuberculosis treatment (96 cases averted per $100,000 spent), and hypertension treatment (84 cases averted per $100,000 spent). Our approach incorporates financial risk protection into the economic evaluation of health interventions and therefore provides information about the efficiency of attainment of both major objectives of a health system: improved health and financial risk protection. One intervention might rank higher on one or both metrics than another, which shows how intervention choice-the selection of a pathway to universal health coverage-might involve weighing up of sometimes competing objectives. This understanding can help policy makers to select interventions to target specific policy goals (ie, improved health or financial risk protection). It is especially relevant for the design and sequencing of universal health coverage to meet the needs of poor populations. Copyright © 2015 Verguet et al. Open access article published under the terms of CC BY-NC-SA. Published by .. All rights reserved.

Screen media usage, sleep time and academic performance in adolescents: clustering a self-organizing maps analysis.

PubMed

Peiró-Velert, Carmen; Valencia-Peris, Alexandra; González, Luis M; García-Massó, Xavier; Serra-Añó, Pilar; Devís-Devís, José

2014-01-01

Screen media usage, sleep time and socio-demographic features are related to adolescents' academic performance, but interrelations are little explored. This paper describes these interrelations and behavioral profiles clustered in low and high academic performance. A nationally representative sample of 3,095 Spanish adolescents, aged 12 to 18, was surveyed on 15 variables linked to the purpose of the study. A Self-Organizing Maps analysis established non-linear interrelationships among these variables and identified behavior patterns in subsequent cluster analyses. Topological interrelationships established from the 15 emerging maps indicated that boys used more passive videogames and computers for playing than girls, who tended to use mobile phones to communicate with others. Adolescents with the highest academic performance were the youngest. They slept more and spent less time using sedentary screen media when compared to those with the lowest performance, and they also showed topological relationships with higher socioeconomic status adolescents. Cluster 1 grouped boys who spent more than 5.5 hours daily using sedentary screen media. Their academic performance was low and they slept an average of 8 hours daily. Cluster 2 gathered girls with an excellent academic performance, who slept nearly 9 hours per day, and devoted less time daily to sedentary screen media. Academic performance was directly related to sleep time and socioeconomic status, but inversely related to overall sedentary screen media usage. Profiles from the two clusters were strongly differentiated by gender, age, sedentary screen media usage, sleep time and academic achievement. Girls with the highest academic results had a medium socioeconomic status in Cluster 2. Findings may contribute to establishing recommendations about the timing and duration of screen media usage in adolescents and appropriate sleep time needed to successfully meet the demands of school academics and to improve interventions targeting to affect behavioral change.

Screen Media Usage, Sleep Time and Academic Performance in Adolescents: Clustering a Self-Organizing Maps Analysis

PubMed Central

Peiró-Velert, Carmen; Valencia-Peris, Alexandra; González, Luis M.; García-Massó, Xavier; Serra-Añó, Pilar; Devís-Devís, José

2014-01-01

Screen media usage, sleep time and socio-demographic features are related to adolescents' academic performance, but interrelations are little explored. This paper describes these interrelations and behavioral profiles clustered in low and high academic performance. A nationally representative sample of 3,095 Spanish adolescents, aged 12 to 18, was surveyed on 15 variables linked to the purpose of the study. A Self-Organizing Maps analysis established non-linear interrelationships among these variables and identified behavior patterns in subsequent cluster analyses. Topological interrelationships established from the 15 emerging maps indicated that boys used more passive videogames and computers for playing than girls, who tended to use mobile phones to communicate with others. Adolescents with the highest academic performance were the youngest. They slept more and spent less time using sedentary screen media when compared to those with the lowest performance, and they also showed topological relationships with higher socioeconomic status adolescents. Cluster 1 grouped boys who spent more than 5.5 hours daily using sedentary screen media. Their academic performance was low and they slept an average of 8 hours daily. Cluster 2 gathered girls with an excellent academic performance, who slept nearly 9 hours per day, and devoted less time daily to sedentary screen media. Academic performance was directly related to sleep time and socioeconomic status, but inversely related to overall sedentary screen media usage. Profiles from the two clusters were strongly differentiated by gender, age, sedentary screen media usage, sleep time and academic achievement. Girls with the highest academic results had a medium socioeconomic status in Cluster 2. Findings may contribute to establishing recommendations about the timing and duration of screen media usage in adolescents and appropriate sleep time needed to successfully meet the demands of school academics and to improve interventions targeting to affect behavioral change. PMID:24941009

Metabolomics Guides Rational Development of a Simplified Cell Culture Medium for Drug Screening against Trypanosoma brucei

PubMed Central

Creek, Darren J.; Nijagal, Brunda; Kim, Dong-Hyun; Rojas, Federico; Matthews, Keith R.

2013-01-01

In vitro culture methods underpin many experimental approaches to biology and drug discovery. The modification of established cell culture methods to make them more biologically relevant or to optimize growth is traditionally a laborious task. Emerging metabolomic technology enables the rapid evaluation of intra- and extracellular metabolites and can be applied to the rational development of cell culture media. In this study, untargeted semiquantitative and targeted quantitative metabolomic analyses of fresh and spent media revealed the major nutritional requirements for the growth of bloodstream form Trypanosoma brucei. The standard culture medium (HMI11) contained unnecessarily high concentrations of 32 nutrients that were subsequently removed to make the concentrations more closely resemble those normally found in blood. Our new medium, Creek's minimal medium (CMM), supports in vitro growth equivalent to that in HMI11 and causes no significant perturbation of metabolite levels for 94% of the detected metabolome (<3-fold change; α = 0.05). Importantly, improved sensitivity was observed for drug activity studies in whole-cell phenotypic screenings and in the metabolomic mode of action assays. Four-hundred-fold 50% inhibitory concentration decreases were observed for pentamidine and methotrexate, suggesting inhibition of activity by nutrients present in HMI11. CMM is suitable for routine cell culture and offers important advantages for metabolomic studies and drug activity screening. PMID:23571546

The behavior and importance of lactic acid complexation in Talspeak extraction systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grimes, Travis S.; Nilsson, Mikael; Nash, Kenneth L.

2008-07-01

Advanced partitioning of spent nuclear fuel in the UREX +la process relies on the TALSPEAK process for separation of fission-product lanthanides from trivalent actinides. The classic TALSPEAK utilizes an aqueous medium of both lactic acid and diethylenetriaminepentaacetic acid and the extraction reagent di(2-ethylhexyl)phosphoric acid in an aromatic diluent. In this study, the specific role of lactic acid and the complexes involved in the extraction of the trivalent actinides and lanthanides have been investigated using {sup 14}C-labeled lactic acid. Our results show that lactic acid partitions between the phases in a complex fashion. (authors)

How Are California's Education Dollars Spent? EdFact.

ERIC Educational Resources Information Center

EdSource, Inc., Palo Alto, CA.

School spending decisions are made locally in California, mostly by the leaders in each school district. In making these decisions, local districts have to comply with the provisions of local collective bargaining contracts with employee unions and with state and federal regulations regarding how some money must be spent. An analysis of school…

Electrochemical performance studies of MnO{sub 2} nanoflowers recovered from spent battery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, Gomaa A.M.; Chemistry Department, Faculty of Science, Al-Azhar University, Assiut 71524; Tan, Ling Ling

2014-12-15

Highlights: • MnO{sub 2} is recovered from spent zinc–carbon batteries as nanoflowers structure. • Recovered MnO{sub 2} nanoflowers show high specific capacitance. • Recovered MnO{sub 2} nanoflowers show stable electrochemical cycling up to 900 cycles. • Recovered MnO{sub 2} nanoflowers show low resistance in EIS data. - Abstract: The electrochemical performance of MnO{sub 2} nanoflowers recovered from spent household zinc–carbon battery is studied by cyclic voltammetry, galvanostatic charge/discharge cycling and electrochemical impedance spectroscopy. MnO{sub 2} nanoflowers are recovered from spent zinc–carbon battery by combination of solution leaching and electrowinning techniques. In an effort to utilize recovered MnO{sub 2} nanoflowers asmore » energy storage supercapacitor, it is crucial to understand their structure and electrochemical performance. X-ray diffraction analysis confirms the recovery of MnO{sub 2} in birnessite phase, while electron microscopy analysis shows the MnO{sub 2} is recovered as 3D nanostructure with nanoflower morphology. The recovered MnO{sub 2} nanoflowers exhibit high specific capacitance (294 F g{sup −1} at 10 mV s{sup −1}; 208.5 F g{sup −1} at 0.1 A g{sup −1}) in 1 M Na{sub 2}SO{sub 4} electrolyte, with stable electrochemical cycling. Electrochemical data analysis reveal the great potential of MnO{sub 2} nanoflowers recovered from spent zinc–carbon battery in the development of high performance energy storage supercapacitor system.« less

Proteoglycan 4 (PRG4) synthesis and immunolocalization in bovine meniscus.

PubMed

Schumacher, Barbara L; Schmidt, Tannin A; Voegtline, Michael S; Chen, Albert C; Sah, Robert L

2005-05-01

Proteoglycan 4 (PRG4) is synthesized and secreted into the synovial fluid by articular chondrocytes and synovial cells, lining the cavity of joints. A thin layer of PRG4 is also present at the articular surface, where it appears to be involved in boundary lubrication. This study investigated if PRG4 is also synthesized and secreted by the cells within meniscus, and if PRG4 is also present in, and at the surface of, meniscus. PRG4 was visualized in sections of bovine calf menisci by immunohistochemistry. PRG4 was detected in two regions: (1) at the femoral and tibial surfaces of the meniscus, and within cells below these surfaces; and (2) within and near cells along the radial tie fibers and circumferential fibers. From meniscus tissue harvested from these surfaces, PRG4 was extracted with 4M GuHCl and quantified by ELISA. There was 0.20 +/- 0.01 and 0.25 +/- 0.04 microg PRG4/cm(2) area of lateral and medial meniscus surface, respectively. ELISA analysis of spent medium from other samples of meniscus surface tissue incubated in medium supplemented with serum and ascorbate showed that 8.1 +/- 1.1 microg PRG4/cm(2) area of meniscus surface was secreted over six days. These results demonstrate that PRG4 is synthesized and secreted by certain cell populations in the meniscus, and that PRG4 is present in the meniscus at surfaces and also internal fibers where it may contribute to boundary lubrication.

Structural Health Monitoring of Nuclear Spent Fuel Storage Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Lingyu

Interim storage of spent nuclear fuel from reactor sites has gained additional importance and urgency for resolving waste-management-related technical issues. To ensure that nuclear power remains clean energy, monitoring has been identified by DOE as a high priority cross-cutting need, necessary to determine and predict the degradation state of the systems, structures, and components (SSCs) important to safety (ITS). Therefore, nondestructive structural condition monitoring becomes a need to be installed on existing or to be integrated into future storage system to quantify the state of health or to guarantee the safe operation of nuclear power plants (NPPs) during their extendedmore » life span. In this project, the lead university and the collaborating national laboratory teamed to develop a nuclear structural health monitoring (n-SHM) system based on in-situ piezoelectric sensing technologies that can monitor structural degradation and aging for nuclear spent fuel DCSS and similar structures. We also aimed to identify and quantify possible influences of nuclear spent fuel environment (temperature and radiation) to the piezoelectric sensor system and come up with adequate solutions and guidelines therefore. We have therefore developed analytical model for piezoelectric based n-SHM methods, with considerations of temperature and irradiation influence on the model of sensing and algorithms in acoustic emission (AE), guided ultrasonic waves (GUW), and electromechanical impedance spectroscopy (EMIS). On the other side, experimentally the temperature and irradiation influence on the piezoelectric sensors and sensing capabilities were investigated. Both short-term and long-term irradiation investigation with our collaborating national laboratory were performed. Moreover, we developed multi-modal sensing, validated in laboratory setup, and conducted the testing on the We performed multi-modal sensing development, verification and validation tests on very complex structures including a medium-scale vacuum drying chamber and a small-scale mockup canister available for the desired testing. Our work developed the potential candidate for long term structural health monitoring of spent fuel canister through piezoelectric wafer sensors and provided the sensing methodologies based on AE and GUW methodologies. It overall provides an innovative system and methodology for enhancing the safe operation of nuclear power plant. All major accomplishments planned in the original proposal were successfully achieved.« less

Spent fuel behavior under abnormal thermal transients during dry storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stahl, D.; Landow, M.P.; Burian, R.J.

1986-01-01

This study was performed to determine the effects of abnormally high temperatures on spent fuel behavior. Prior to testing, calculations using the CIRFI3 code were used to determine the steady-state fuel and cask component temperatures. The TRUMP code was used to determine transient heating rates under postulated abnormal events during which convection cooling of the cask surfaces was obstructed by a debris bed covering the cask. The peak rate of temperature rise during the first 6 h was calculated to be about 15/sup 0/C/h, followed by a rate of about 1/sup 0/C/h. A Turkey Point spent fuel rod segment wasmore » heated to approx. 800/sup 0/C. The segment deformed uniformly with an average strain of 17% at failure and a local strain of 60%. Pretest characterization of the spent fuel consisted of visual examination, profilometry, eddy-current examination, gamma scanning, fission gas collection, void volume measurement, fission gas analysis, hydrogen analysis of the cladding, burnup analysis, cladding metallography, and fuel ceramography. Post-test characterization showed that the failure was a pinhole cladding breach. The results of the tests showed that spent fuel temperatures in excess of 700/sup 0/C are required to produce a cladding breach in fuel rods pressurized to 500 psing (3.45 MPa) under postulated abnormal thermal transient cask conditions. The pinhole cladding breach that developed would be too small to compromise the confinement of spent fuel particles during an abnormal event or after normal cooling conditions are restored. This behavior is similar to that found in other slow ramp tests with irradiated and nonirradiated rod sections and nonirradiated whole rods under conditions that bracketed postulated abnormal heating rates. This similarity is attributed to annealing of the irradiation-strengthened Zircaloy cladding during heating. In both cases, the failure was a benign, ductile pinhole rupture.« less

Real life experimental determination of platinum group metals content in automotive catalytic converters

NASA Astrophysics Data System (ADS)

Yakoumis, I.; Moschovi, A. M.; Giannopoulou, I.; Panias, D.

2018-03-01

The real life experimental protocol for the preparation of spent automobile catalyst samples for elemental analysis is thoroughly described in the following study. Collection, sorting and dismantling, homogenization and sample preparation for X-Ray fluorescence spectroscopy and Atomic Adsorption Spectroscopy combined with Inductive coupled plasma mass spectrometry are discussed in detail for both ceramic and metallic spent catalysts. The concentrations of Platinum Group Metals (PGMs) in spent catalytic converters are presented based on typical consignments of recycled converters (more than 45,000 pieces) from the Greek Market. The conclusions clearly denoted commercial metallic catalytic foil contains higher PGMs loading than ceramic honeycombs. On the other hand, the total PGMs loading in spent ceramic catalytic converters has been found higher than the corresponding value for the metallic ones.

Legal, institutional, and political issues in transportation of nuclear materials at the back end of the LWR nuclear fuel cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lippek, H.E.; Schuller, C.R.

1979-03-01

A study was conducted to identify major legal and institutional problems and issues in the transportation of spent fuel and associated processing wastes at the back end of the LWR nuclear fuel cycle. (Most of the discussion centers on the transportation of spent fuel, since this activity will involve virtually all of the legal and institutional problems likely to be encountered in moving waste materials, as well.) Actions or approaches that might be pursued to resolve the problems identified in the analysis are suggested. Two scenarios for the industrial-scale transportation of spent fuel and radioactive wastes, taken together, high-light mostmore » of the major problems and issues of a legal and institutional nature that are likely to arise: (1) utilizing the Allied General Nuclear Services (AGNS) facility at Barnwell, SC, as a temporary storage facility for spent fuel; and (2) utilizing AGNS for full-scale commercial reprocessing of spent LWR fuel.« less

Array Detector Modules for Spent Fuel Verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bolotnikov, Aleksey

Brookhaven National Laboratory (BNL) proposes to evaluate the arrays of position-sensitive virtual Frisch-grid (VFG) detectors for passive gamma-ray emission tomography (ET) to verify the spent fuel in storage casks before storing them in geo-repositories. Our primary objective is to conduct a preliminary analysis of the arrays capabilities and to perform field measurements to validate the effectiveness of the proposed array modules. The outcome of this proposal will consist of baseline designs for the future ET system which can ultimately be used together with neutrons detectors. This will demonstrate the usage of this technology in spent fuel storage casks.

The Relationship between Parent-Infant Bed Sharing and Marital Satisfaction for Mothers of Infants

ERIC Educational Resources Information Center

Messmer, Rosemary; Miller, Lynn D.; Yu, Christine M.

2012-01-01

This study investigated the relationship between marital satisfaction and time spent bed sharing with infants in a community sample of 81 bed sharing mothers. Time spent bed sharing did not significantly predict variance in marital satisfaction when considering bed sharers as a whole. Moderation analysis, however, showed the interaction between…

Fermentation Kinetics for Xylitol Production by a Pichia stipitis d-Xylulokinase Mutant Previously Grown in Spent Sulfite Liquor

NASA Astrophysics Data System (ADS)

Rodrigues, Rita C. L. B.; Lu, Chenfeng; Lin, Bernice; Jeffries, Thomas W.

Spent sulfite pulping liquor (SSL) contains lignin, which is present as lignosulfonate, and hemicelluloses that are present as hydrolyzed carbohydrates. To reduce the biological oxygen demand of SSL associated with dissolved sugars, we studied the capacity of Pichia stipitis FPL-YS30 (xyl3Δ) to convert these sugars into useful products. FPL-YS30 produces a negligible amount of ethanol while converting xylose into xylitol. This work describes the xylose fermentation kinetics of yeast strain P.stipitis FPL-YS30. Yeast was grown in rich medium supplemented with different carbon sources: glucose, xylose, or ammonia-base SSL. The SSL and glucose-acclimatized cells showed similar maximum specific growth rates (0.146 h-1). The highest xylose consumption at the beginning of the fermentation process occurred using cells precultivated in xylose, which showed relatively high specific activity of glucose-6-phosphate dehydrogenase (EC 1.1.1.49). However, the maximum specific rates of xylose consumption (0.19 gxylose/gcel h) and xylitol production (0.059 gxylitol/gcel h) were obtained with cells acclimatized in glucose, in which the ratio between xylose reductase (EC 1.1.1.21) and xylitol dehydrogenase (EC 1.1.1.9) was kept at higher level (0.82). In this case, xylitol production (31.6 g/l) was 19 and 8% higher than in SSL and xylose-acclimatized cells, respectively. Maximum glycerol (6.26 g/l) and arabitol (0.206 g/l) production were obtained using SSL and xylose-acclimatized cells, respectively. The medium composition used for the yeast precultivation directly reflected their xylose fermentation performance. The SSL could be used as a carbon source for cell production. However, the inoculum condition to obtain a high cell concentration in SSL needs to be optimized.

Class III peroxidases in cellulose deficient cultured maize cells during cell wall remodelling.

PubMed

Martínez-Rubio, Romina; Acebes, José Luis; Encina, Antonio; Kärkönen, Anna

2018-02-21

Maize (Zea mays L.) suspension-cultured cells habituated to a cellulose biosynthesis inhibitor 2,6-dichlorobenzonitrile (DCB) have a modified cell wall, in which the reduction in the cellulose content is compensated by a network of highly cross-linked feruloylated arabinoxylans and the deposition of lignin-like polymers. For both arabinoxylan cross-linking and lignin polymerization, class III peroxidases (POXs) have been demonstrated to have a prominent role. For the first time, a comparative study of POX activity and isoforms in control and cellulose-impaired cells has been addressed, also taking into account their cellular distribution in different compartments. Proteins from the spent medium (SM), soluble cellular (SC), ionically (ICW) and covalently bound cell wall protein fractions were assayed for total and specific peroxidase activity by using coniferyl and sinapyl alcohol and ferulic acid as substrates. The isoPOX profile was obtained by isoelectric focusing. POX activity was higher in DCB-habituated than in non-habituated cells in all protein fractions at all cell culture stages. For all substrates assayed, SC and ICW fractions showed higher activity at the early-log growth phase than at the late-log phase. However, the highest POX activity in the spent medium was found at the late-log phase. According to the isoPOX profiles, the highest diversity of isoPOXs was detected in the ICW and SM protein fractions. The latter fraction contained isoPOXs with higher activity in DCB-habituated cells. Some of the isoPOXs detected could be involved in cross-linking of arabinoxylans and in the lignin-like polymer formation in DCB-habituated cells. This article is protected by copyright. All rights reserved.

Deriving a GPS Monitoring Time Recommendation for Physical Activity Studies of Adults.

PubMed

Holliday, Katelyn M; Howard, Annie Green; Emch, Michael; Rodríguez, Daniel A; Rosamond, Wayne D; Evenson, Kelly R

2017-05-01

Determining locations of physical activity (PA) is important for surveillance and intervention development, yet recommendations for using location recording tools like global positioning system (GPS) units are lacking. Specifically, no recommendation exists for the number of days study participants should wear a GPS to reliably estimate PA time spent in locations. This study used data from participants (N = 224, age = 18-85 yr) in five states who concurrently wore an ActiGraph GT1M accelerometer and a Qstarz BT-Q1000X GPS for three consecutive weeks to construct monitoring day recommendations through variance partitioning methods. PA bouts ≥10 min were constructed from accelerometer counts, and the location of GPS points was determined using a hand-coding protocol. Monitoring day recommendations varied by the type of location (e.g., participant homes vs parks) and the intensity of PA bouts considered (low and medium cut point moderate to vigorous PA [MVPA] bouts or high cut point vigorous PA [VPA] bouts). In general, minutes of all PA intensities spent in a given location could be measured with ≥80% reliability using 1-3 d of GPS monitoring for fitness facilities, schools, and footpaths. MVPA bout minutes in parks and roads required longer monitoring periods of 5-12 d. PA in homes and commercial areas required >19 d of monitoring. Twelve days of monitoring was found to reliably estimate minutes in both low and medium threshold MVPA as well as VPA bouts for many important built environment locations that can be targeted to increase PA at the population level. Minutes of PA in the home environment and commercial locations may be best assessed through other means given the lengthy estimated monitoring time required.

Effect of algorithm aggressiveness on the performance of the Hypoglycemia-Hyperglycemia Minimizer (HHM) System.

PubMed

Finan, Daniel A; McCann, Thomas W; Rhein, Kathleen; Dassau, Eyal; Breton, Marc D; Patek, Stephen D; Anhalt, Henry; Kovatchev, Boris P; Doyle, Francis J; Anderson, Stacey M; Zisser, Howard; Venugopalan, Ramakrishna

2014-07-01

The Hypoglycemia-Hyperglycemia Minimizer (HHM) System aims to mitigate glucose excursions by preemptively modulating insulin delivery based on continuous glucose monitor (CGM) measurements. The "aggressiveness factor" is a key parameter in the HHM System algorithm, affecting how readily the system adjusts insulin infusion in response to changing CGM levels. Twenty adults with type 1 diabetes were studied in closed-loop in a clinical research center for approximately 26 hours. This analysis focused on the effect of the aggressiveness factor on the insulin dosing characteristics of the algorithm and, to a lesser extent, on the glucose control results observed. As the aggressiveness factor increased from conservative to medium to aggressive: the maximum observed insulin dose delivered by the algorithm—which is designed to give doses that are corrective in nature every 5 minutes—increased (1.00 vs 1.15 vs 2.20 U, respectively); tendency to adhere to the subject's nominal basal dose decreased (61.9% vs 56.6% vs 53.4%); and readiness to decrease insulin below basal also increased (18.4% vs 19.4% vs 25.2%). Glucose analyses by both CGM and Yellow Springs Instruments (YSI) indicated that the aggressive setting of the algorithm resulted in the least time spent at levels >180 mg/dL, and the most time spent between 70-180 mg/dL. There was no severe hyperglycemia, diabetic ketoacidosis, or severe hypoglycemia for any of the aggressiveness values investigated. These analyses underscore the importance of investigating the sensitivity of the HHM System to its key parameters, such as the aggressiveness factor, to guide future development decisions. © 2014 Diabetes Technology Society.

Determinants of Children's Use of and Time Spent in Fast-Food and Full-Service Restaurants

ERIC Educational Resources Information Center

McIntosh, Alex; Kubena, Karen S.; Tolle, Glen; Dean, Wesley; Kim, Mi-Jeong; Jan, Jie-Sheng; Anding, Jenna

2011-01-01

Objective: Identify parental and children's determinants of children's use of and time spent in fast-food (FF) and full-service (FS) restaurants. Design: Analysis of cross-sectional data. Setting: Parents were interviewed by phone; children were interviewed in their homes. Participants: Parents and children ages 9-11 or 13-15 from 312 families…

Transport and geotechnical properties of porous media with applications to retorted oil shale. Volume 4. Appendix D. Temperature and toe erosion effects on spent oil shale embankment stability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, N.Y.; Wu, T.H.

1986-01-01

To evaluate the engineering property of spent shale at elevated temperatures, high temperature triaxial cells were designed and manufactured. The cells were then used in the test program designed to provide the physical and engineering properties of spent shale (TOSCO-II) at elevated temperatures. A series of consolidated drained triaxial tests were conducted at high temperatures. Duncan-Chang hyperbolic model was adopted to simulate the laboratory stress versus strain behavior of spent shale at various temperatures. This model provides very good fit to the laboratory stress-strain-volumetric strain characteristics of spent shale at various temperatures. The parameters of this model were then formulatedmore » as functions of temperatures and the Duncan-Chang model was implemented in a finite element analysis computer code for predicting the stress-deformation behavior of large spent shale embankments. Modified Bishop method was also used in analyzing the stability of spent shale embankments. The stability of three different spent shale embankments at three different temperatures were investigated in the study. Additionally the stability of embankments with different degrees of toe erosion was also studied. Results of this study indicated that (1) the stress-strain-strength properties of soils are affected by temperature variation; (2) the stress-strain-strength behavior of spent shale can be simulated by Duncan-Chang hyperbolic model, (3) the factor of safety of embankment slope decreases with rising temperatures; (4) the embankment deformation increases with rising temperatures; and (5) the toe erosion induced by floods causes the embankment slope to become less stable. It is strongly recommended, to extend this study to investigate the effect of internal seepage on the stability of large spent shale embankment. 68 refs., 53 figs., 16 tabs.« less

Pyroprocessing of Light Water Reactor Spent Fuels Based on an Electrochemical Reduction Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ohta, Hirokazu; Inoue, Tadashi; Sakamura, Yoshiharu

A concept of pyroprocessing light water reactor (LWR) spent fuels based on an electrochemical reduction technology is proposed, and the material balance of the processing of mixed oxide (MOX) or high-burnup uranium oxide (UO{sub 2}) spent fuel is evaluated. Furthermore, a burnup analysis for metal fuel fast breeder reactors (FBRs) is conducted on low-decontamination materials recovered by pyroprocessing. In the case of processing MOX spent fuel (40 GWd/t), UO{sub 2} is separately collected for {approx}60 wt% of the spent fuel in advance of the electrochemical reduction step, and the product recovered through the rare earth (RE) removal step, which hasmore » the composition uranium:plutonium:minor actinides:fission products (FPs) = 76.4:18.4:1.7:3.5, can be applied as an ingredient of FBR metal fuel without a further decontamination process. On the other hand, the electroreduced alloy of high-burnup UO{sub 2} spent fuel (48 GWd/t) requires further decontamination of residual FPs by an additional process such as electrorefining even if RE FPs are removed from the alloy because the recovered plutonium (Pu) is accompanied by almost the same amount of FPs in addition to RE. However, the amount of treated materials in the electrorefining step is reduced to {approx}10 wt% of the total spent fuel owing to the prior UO{sub 2} recovery step. These results reveal that the application of electrochemical reduction technology to LWR spent oxide fuel is a promising concept for providing FBR metal fuel by a rationalized process.« less

Associations between maternal employment and time spent in nutrition-related behaviours among German children and mothers.

PubMed

Möser, Anke; Chen, Susan E; Jilcott, Stephanie B; Nayga, Rodolfo M

2012-07-01

To examine associations between maternal employment and time spent engaging in nutrition-related behaviours among mothers and children using a nationally representative sample of households in West and East Germany. A cross-sectional analysis was performed using time-use data for a sample of mother-child dyads. Associations between maternal employment and time spent in nutrition-related activities such as eating at home, eating away from home and food preparation were estimated using a double-hurdle model. German Time Budget Survey 2001/02. The overall sample included 1071 households with a child between 10 and 17 years of age. The time-use data were collected for a 3 d period of observation (two weekdays and one weekend day). Maternal employment was associated with the time children spent on nutrition-related behaviours. In households with employed mothers, children spent more time eating alone at home and less time eating meals with their mothers. Moreover, employed mothers spent less time on meal preparation compared with non-employed mothers. There were regional differences in time spent on nutrition-related behaviours, such that East German children were more likely to eat at home alone than West German children. Maternal employment was associated with less time spent eating with children and preparing food, which may be related to the increasing childhood obesity rates in Germany. Future national surveys that collect both time-use data and health outcomes could yield further insight into mechanisms by which maternal time use might be associated with health outcomes among children.

Is time spent playing video games associated with mental health, cognitive and social skills in young children?

PubMed

Kovess-Masfety, Viviane; Keyes, Katherine; Hamilton, Ava; Hanson, Gregory; Bitfoi, Adina; Golitz, Dietmar; Koç, Ceren; Kuijpers, Rowella; Lesinskiene, Sigita; Mihova, Zlatka; Otten, Roy; Fermanian, Christophe; Pez, Ondine

2016-03-01

Video games are one of the favourite leisure activities of children; the influence on child health is usually perceived to be negative. The present study assessed the association between the amount of time spent playing video games and children mental health as well as cognitive and social skills. Data were drawn from the School Children Mental Health Europe project conducted in six European Union countries (youth ages 6-11, n = 3195). Child mental health was assessed by parents and teachers using the Strengths and Difficulties Questionnaire and by children themselves with the Dominic Interactive. Child video game usage was reported by the parents. Teachers evaluated academic functioning. Multivariable logistic regressions were used. 20 % of the children played video games more than 5 h per week. Factors associated with time spent playing video games included being a boy, being older, and belonging to a medium size family. Having a less educated, single, inactive, or psychologically distressed mother decreased time spent playing video games. Children living in Western European countries were significantly less likely to have high video game usage (9.66 vs 20.49 %) though this was not homogenous. Once adjusted for child age and gender, number of children, mothers age, marital status, education, employment status, psychological distress, and region, high usage was associated with 1.75 times the odds of high intellectual functioning (95 % CI 1.31-2.33), and 1.88 times the odds of high overall school competence (95 % CI 1.44-2.47). Once controlled for high usage predictors, there were no significant associations with any child self-reported or mother- or teacher-reported mental health problems. High usage was associated with decreases in peer relationship problems [OR 0.41 (0.2-0.86) and in prosocial deficits (0.23 (0.07, 0.81)]. Playing video games may have positive effects on young children. Understanding the mechanisms through which video game use may stimulate children should be further investigated.

Fate of Noble Metals during the Pyroprocessing of Spent Nuclear Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

B.R. Westphal; D. Vaden; S.X. Li

During the pyroprocessing of spent nuclear fuel by electrochemical techniques, fission products are separated as the fuel is oxidized at the anode and refined uranium is deposited at the cathode. Those fission products that are oxidized into the molten salt electrolyte are considered active metals while those that do not react are considered noble metals. The primary noble metals encountered during pyroprocessing are molybdenum, zirconium, ruthenium, rhodium, palladium, and technetium. Pyroprocessing of spent fuel to date has involved two distinctly different electrorefiner designs, in particular the anode to cathode configuration. For one electrorefiner, the anode and cathode collector are horizontallymore » displaced such that uranium is transported across the electrolyte medium. As expected, the noble metal removal from the uranium during refining is very high, typically in excess of 99%. For the other electrorefiner, the anode and cathode collector are vertically collocated to maximize uranium throughput. This arrangement results in significantly less noble metals removal from the uranium during refining, typically no better than 20%. In addition to electrorefiner design, operating parameters can also influence the retention of noble metals, albeit at the cost of uranium recovery. Experiments performed to date have shown that as much as 100% of the noble metals can be retained by the cladding hulls while affecting the uranium recovery by only 6%. However, it is likely that commercial pyroprocessing of spent fuel will require the uranium recovery to be much closer to 100%. The above mentioned design and operational issues will likely be driven by the effects of noble metal contamination on fuel fabrication and performance. These effects will be presented in terms of thermal properties (expansion, conductivity, and fusion) and radioactivity considerations. Ultimately, the incorporation of minor amounts of noble metals from pyroprocessing into fast reactor metallic fuel will be shown to be of no consequence to reactor performance.« less

Engaging Undergraduate Biology Students in Scientific Modeling: Analysis of Group Interactions, Sense-Making, and Justification

PubMed Central

Bierema, Andrea M.-K.; Schwarz, Christina V.; Stoltzfus, Jon R.

2017-01-01

National calls for improving science education (e.g., Vision and Change) emphasize the need to learn disciplinary core ideas through scientific practices. To address this need, we engaged small groups of students in developing diagrammatic models within two (one large-enrollment and one medium-enrollment) undergraduate introductory biology courses. During these activities, students developed scientific models of biological phenomena such as enhanced growth in genetically modified fish. To investigate whether undergraduate students productively engaged in scientific practices during these modeling activities, we recorded groups of students as they developed models and examined three characteristics: how students 1) interacted with one another, 2) made sense of phenomena, and 3) justified their ideas. Our analysis indicates that students spent most of the time on task, developing and evaluating their models. Moreover, they worked cooperatively to make sense of core ideas and justified their ideas to one another throughout the activities. These results demonstrate that, when provided with the opportunity to develop models during class, students in large-enrollment lecture courses can productively engage in scientific practices. We discuss potential reasons for these outcomes and suggest areas of future research to continue advancing knowledge regarding engaging students in scientific practices in large-enrollment lecture courses. PMID:29196429

Proliferation resistance assessment of various methods of spent nuclear fuel storage and disposal

NASA Astrophysics Data System (ADS)

Kollar, Lenka

Many countries are planning to build or already are building new nuclear power plants to match their growing energy needs. Since all nuclear power plants handle nuclear materials that could potentially be converted and used for nuclear weapons, they each present a nuclear proliferation risk. Spent nuclear fuel presents the largest build-up of nuclear material at a power plant. This is a proliferation risk because spent fuel contains plutonium that can be chemically separated and used for a nuclear weapon. The International Atomic Energy Agency (IAEA) safeguards spent fuel in all non-nuclear weapons states that are party to the Non-Proliferation Treaty. Various safeguards methods are in use at nuclear power plants and research is underway to develop safeguards methods for spent fuel in centralized storage or underground storage and disposal. Each method of spent fuel storage presents different proliferation risks due to the nature of the storage method and the safeguards techniques that are utilized. Previous proliferation resistance and proliferation risk assessments have mainly compared nuclear material through the whole fuel cycle and not specifically focused on spent fuel storage. This project evaluates the proliferation resistance of the three main types of spent fuel storage: spent fuel pool, dry cask storage, and geological repository. The proliferation resistance assessment methodology that is used in this project is adopted from previous work and altered to be applicable to spent fuel storage. The assessment methodology utilizes various intrinsic and extrinsic proliferation-resistant attributes for each spent fuel storage type. These attributes are used to calculate a total proliferation resistant (PR) value. The maximum PR value is 1.00 and a greater number means that the facility is more proliferation resistant. Current data for spent fuel storage in the United States and around the world was collected. The PR values obtained from this data are 0.49 for the spent fuel pool, 0.42 for dry cask storage, 0.36 for the operating geological repository, and 0.28 for the closed geological repository. Therefore, the spent fuel pool is currently the most proliferation resistant method for storing spent fuel. The extrinsic attributes, mainly involving safeguards measures, affect the total PR value the most. As a result, several recommendations are made to improve the proliferation resistance of spent fuel. These recommendations include employing more advanced safeguards measures, such as verification techniques and remote monitoring, for dry cask storage and the geological repository. Dry cask storage facilities should also be located at the plant and in a secure building to minimize the proliferation risk. Finally, the cost-benefit analysis of increased safeguards needs to be considered. Taking these recommendations into account, the PR values of dry cask storage and the closed geological would be significantly increased, to 0.57 and 0.51, respectively. As a result, with increased safeguards to the safeguards level of the spent fuel pool, dry cask storage would be the most proliferation resistant method to store spent fuel. Therefore, the IAEA should continue to develop remote monitoring and cask storage verification techniques in order to improve the proliferation resistance of spent fuel.

NGS Analysis of Human Embryo Culture Media Reveals miRNAs of Extra Embryonic Origin.

PubMed

Sánchez-Ribas, Immaculada; Diaz-Gimeno, Patricia; Quiñonero, Alicia; Ojeda, María; Larreategui, Zaloa; Ballesteros, Agustín; Domínguez, Francisco

2018-01-01

Our objective in this work was to isolate, identify, and compare micro-RNAs (miRNAs) found in spent culture media of euploid and aneuploid in vitro fertilization (IVF) embryos. Seventy-two embryos from 62 patients were collected, and their spent media were retained. A total of 108 spent conditioned media samples were analyzed (n = 36 day 3 euploid embryos, n = 36 day 3 aneuploid embryos, and n = 36 matched control media). Fifty hed-control media embryos were analyzed using next-generation sequencing (NGS) technology. We detected 53 known human miRNAs present in the spent conditioned media of euploid and aneuploid IVF embryos. miR-181b-5p and miR-191-5p were found the most represented. We validated our results by quantitative polymerase chain reaction (qPCR), but no significant results were obtained between the groups. In conclusion, we obtained the list of miRNAs present in the spent conditioned media from euploid and aneuploid IVF embryos, but our data suggest that these miRNAs could have a nonembryonic origin.

4-Pyridoxic Acid in the Spent Dialysate: Contribution to Fluorescence and Optical Monitoring

PubMed Central

Kalle, Sigrid; Tanner, Risto; Arund, Jürgen; Tomson, Ruth; Luman, Merike; Fridolin, Ivo

2016-01-01

Aim In this work we estimated the contribution of the fluorescence of 4-pyridoxic acid (4-PA) to the total fluorescence of spent dialysate with the aim of evaluating the on-line monitoring of removal of this vitamin B-6 metabolite from the blood of patients with end-stage renal disease (ESRD). Methods Spectrofluorometric analysis of spent dialysate, collected from hemodialysis and hemodiafiltration sessions of 10 patients receiving regularly pyridoxine injections after dialysis treatment, was performed in the range of Ex/Em 220–500 nm. 4-PA in dialysate samples was identified and quantified using HPLC with fluorescent and MS/MS detection. Results Averaged HPLC chromatogram of spent dialysate had many peaks in the wavelength region of Ex320/Em430 nm where 4-PA was the highest peak with contribution of 42.2±17.0% at the beginning and 47.7±18.0% in the end of the dialysis. High correlation (R = 0.88–0.95) between 4-PA concentration and fluorescence intensity of spent dialysate was found in the region of Ex310-330/Em415-500 nm, respectively. Conclusion 4-PA elimination from the blood of ESRD patients can be potentially followed using monitoring of the fluorescence of the spent dialysate during dialysis treatments. PMID:27598005

4-Pyridoxic Acid in the Spent Dialysate: Contribution to Fluorescence and Optical Monitoring.

PubMed

Kalle, Sigrid; Tanner, Risto; Arund, Jürgen; Tomson, Ruth; Luman, Merike; Fridolin, Ivo

2016-01-01

In this work we estimated the contribution of the fluorescence of 4-pyridoxic acid (4-PA) to the total fluorescence of spent dialysate with the aim of evaluating the on-line monitoring of removal of this vitamin B-6 metabolite from the blood of patients with end-stage renal disease (ESRD). Spectrofluorometric analysis of spent dialysate, collected from hemodialysis and hemodiafiltration sessions of 10 patients receiving regularly pyridoxine injections after dialysis treatment, was performed in the range of Ex/Em 220-500 nm. 4-PA in dialysate samples was identified and quantified using HPLC with fluorescent and MS/MS detection. Averaged HPLC chromatogram of spent dialysate had many peaks in the wavelength region of Ex320/Em430 nm where 4-PA was the highest peak with contribution of 42.2±17.0% at the beginning and 47.7±18.0% in the end of the dialysis. High correlation (R = 0.88-0.95) between 4-PA concentration and fluorescence intensity of spent dialysate was found in the region of Ex310-330/Em415-500 nm, respectively. 4-PA elimination from the blood of ESRD patients can be potentially followed using monitoring of the fluorescence of the spent dialysate during dialysis treatments.

Disposal of spent fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blomeke, J O; Ferguson, D E; Croff, A G

1978-01-01

Based on preliminary analyses, spent fuel assemblies are an acceptable form for waste disposal. The following studies appear necessary to bring our knowledge of spent fuel as a final disposal form to a level comparable with that of the solidified wastes from reprocessing: 1. A complete systems analysis is needed of spent fuel disposition from reactor discharge to final isolation in a repository. 2. Since it appears desirable to encase the spent fuel assembly in a metal canister, candidate materials for this container need to be studied. 3. It is highly likely that some ''filler'' material will be needed betweenmore » the fuel elements and the can. 4. Leachability, stability, and waste-rock interaction studies should be carried out on the fuels. The major disadvantages of spent fuel as a disposal form are the lower maximum heat loading, 60 kW/acre versus 150 kW/acre for high-level waste from a reprocessing plant; the greater long-term potential hazard due to the larger quantities of plutonium and uranium introduced into a repository; and the possibility of criticality in case the repository is breached. The major advantages are the lower cost and increased near-term safety resulting from eliminating reprocessing and the treatment and handling of the wastes therefrom.« less

How Much Is Too Much to Pay for Internet Access? A Behavioral Economic Analysis of Internet Use.

PubMed

Broadbent, Julie; Dakki, Michelle A

2015-08-01

The popularity of online recreational activities, such as social networking, has dramatically increased the amount of time spent on the Internet. Excessive or inappropriate use of the Internet can result in serious adverse consequences. The current study used a behavioral economic task to determine if the amount of time spent online by problematic and nonproblematic users can be modified by price. The Internet Purchase Task was used to determine how much time undergraduate students (N=233) would spend online at 13 different prices. Despite high demand for Internet access when access was free, time spent online by both problematic and nonproblematic users decreased dramatically, even at low prices. These results suggest that the amount of time spent online may be modified by having a tangible cost associated with use, whereas having free access to the Internet may encourage excessive, problematic use.

Predicting Time Spent in Treatment in a Sample of Danish Survivors of Child Sexual Abuse.

PubMed

Fletcher, Shelley; Elklit, Ask; Shevlin, Mark; Armour, Cherie

2017-07-01

The aim of this study was to identify significant predictors of length of time spent in treatment. In a convenience sample of 439 Danish survivors of child sexual abuse, predictors of time spent in treatment were examined. Assessments were conducted on a 6-month basis over a period of 18 months. A multinomial logistic regression analysis revealed that the experience of neglect in childhood and having experienced rape at any life stage were associated with less time in treatment. Higher educational attainment and being male were associated with staying in treatment for longer periods of time. These factors may be important for identifying those at risk of terminating treatment prematurely. It is hoped that a better understanding of the factors that predict time spent in treatment will help to improve treatment outcomes for individuals who are at risk of dropping out of treatment at an early stage.

A qualitative analysis of the neutron population in fresh and spent fuel assemblies during simulated interrogation using the differential die-away technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tobin, Stephen J.; Lundkvist, Niklas; Goodsell, Alison V.

In this study, Monte Carlo simulations were performed for the differential die-away (DDA) technique to analyse the time-dependent behaviour of the neutron population in fresh and spent nuclear fuel assemblies as part of the Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) Project. Simulations were performed to investigate both a possibly portable as well as a permanent DDA instrument. Taking advantage of a custom made modification to the MCNPX code, the variation in the neutron population, simultaneously in time and space, was examined. The motivation for this research was to improve the design of the DDA instrument, as it is bemore » ing considered for possible deployment at the Central Storage of Spent Nuclear Fuel and Encapsulation Plant in Sweden (Clab), as well as to assist in the interpretation of the both simulated and measured signals.« less

A qualitative analysis of the neutron population in fresh and spent fuel assemblies during simulated interrogation using the differential die-away technique

DOE PAGES

Tobin, Stephen J.; Lundkvist, Niklas; Goodsell, Alison V.; ...

2015-12-01

In this study, Monte Carlo simulations were performed for the differential die-away (DDA) technique to analyse the time-dependent behaviour of the neutron population in fresh and spent nuclear fuel assemblies as part of the Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) Project. Simulations were performed to investigate both a possibly portable as well as a permanent DDA instrument. Taking advantage of a custom made modification to the MCNPX code, the variation in the neutron population, simultaneously in time and space, was examined. The motivation for this research was to improve the design of the DDA instrument, as it is bemore » ing considered for possible deployment at the Central Storage of Spent Nuclear Fuel and Encapsulation Plant in Sweden (Clab), as well as to assist in the interpretation of the both simulated and measured signals.« less

A Between- and Within-Person Analysis of Parenting And Time Spent in Criminogenic Settings during Adolescence: The Role of Self-Control And Delinquent Attitudes

ERIC Educational Resources Information Center

Janssen, Heleen J.; Bruinsma, Gerben J. N.; Dekovic, Maja; Eichelsheim, Veroni I.

2018-01-01

Although spending time in criminogenic settings is increasingly recognized as an explanation for adolescent delinquency, little is known about its determinants. The current study aims to examine the extent to which (change in) self-control and (change in) delinquent attitudes relate to (change in) time spent in criminogenic settings, and the…

Biotechnological conversion of spent coffee grounds into lactic acid.

PubMed

Hudeckova, H; Neureiter, M; Obruca, S; Frühauf, S; Marova, I

2018-04-01

This work investigates the potential bioconversion of spent coffee grounds (SCG) into lactic acid (LA). SCG were hydrolysed by a combination of dilute acid treatment and subsequent application of cellulase. The SCG hydrolysate contained a considerable amount of reducing sugars (9·02 ± 0·03 g l -1 , glucose; 26·49 ± 0·10 g l -1 galactose and 2·81 ± 0·07 g l -1 arabinose) and it was used as a substrate for culturing several lactic acid bacteria (LAB) and LA-producing Bacillus coagulans. Among the screened micro-organisms, Lactobacillus rhamnosus CCM 1825 was identified as the most promising producer of LA on a SCG hydrolysate. Despite the inhibitory effect exerted by furfural and phenolic compounds in the medium, reasonably high LA concentrations (25·69 ± 1·45 g l -1 ) and yields (98%) were gained. Therefore, it could be demonstrated that SCG is a promising raw material for the production of LA and could serve as a feedstock for the sustainable large-scale production of LA. Spent coffee grounds (SCG) represent solid waste generated in millions of tonnes by coffee-processing industries. Their disposal represents a serious environmental problem; however, SCG could be valorized within a biorefinery concept yielding various valuable products. Herein, we suggest that SCG can be used as a complex carbon source for the lactic acid production. © 2018 The Society for Applied Microbiology.

Inhibitory effects of Lactobacillus rhamnosus and Lactobacillus casei on Candida biofilm of denture surface.

PubMed

Song, Young-Gyun; Lee, Sung-Hoon

2017-04-01

Candida albicans biofilm is associated with denture-related stomatitis and oral candidiasis of elderly. Probiotics are beneficial bacteria and have antibacterial activity against pathogenic bacteria. The purpose of this study was to investigate the antifungal activity of various probiotics against C. albicans and the inhibitory effects of probiotics on Candida biofilm on the denture surface. The spent culture media of various probiotics were investigated the antifungal efficacy against C. albicans. Candida biofilm was formed on a denture base resin and was then treated with Lactobacillus rhamnosus and Lactobacillus casei. Also, the biofilms of L. rhamnosus and L. casei were formed and were sequentially treated with C. albicans. Colony-forming units of C. albicans on the denture surface were counted after spreading on agar plate. The denture base resin was treated with the spent culture media for 30days, after which the denture surface roughness was analyzed with an atomic force microscope. L. rhamnosus and L. casei exhibited stronger antifungal activity than other probiotics. The spent culture medium of L. rhamnosus and L. casei exhibited the antifungal activity against blastoconidia and biofilm of C. albicans. L. rhamnosus and L. casei showed the antifungal activity against Candida biofilm, and the biofilm of L. rhamnosus and L. casei inhibited formation of Candida biofilm on denture surface. Neither of the probiotics affected the surface roughness of the denture base resin. L. rhamnosus and L. casei may be the ideal probiotics for the prevention and treatment of denture-related stomatitis. Copyright © 2017 Elsevier Ltd. All rights reserved.

Characterisation of corn extrudates with the addition of brewers' spent grain as a raw material for the production of functional batters.

PubMed

Żelaziński, Tomasz; Ekielski, Adam; Siwek, Adam; Dardziński, Leszek

2017-01-01

Novel food batters, recommended for various products, are at present manufactured by extru- sion. Thanks to this, it is possible to look for and process new raw materials, if their processing has so far been considered impossible or economically unviable. The purpose of the work was therefore to investigate the extrudates produced from the corn and brewers' spent grain compounds that are subsequently used as raw material for food batter production. The work presents the findings of research on extrusion of corn mixes with varying levels of brewers' spent grains, to the maximum amount of 30%. Tests were conducted using a co-rotating double screw extruder, equipped with a single-outlet matrix with a diameter of 2.5mm. The products obtained were subjected to analysis of their parameters (apparent density, strength parameters, abrasiveness index) and the granulation of a single fraction was checked. The sample for which the percentage content was the highest was subjected to a detailed analysis of particle shape using vision software. It was found that an increase in the content of brewers' spent grains resulted in increased hardness of the products obtained. During the tests it was observed that the increasing hardness of the measured sam- ples is opposite to their abrasion resistance. The maximum decrement of the brasion parameters was seen for extrudates with 30% spent grain addition and was 1.4%, while the minimum decrement values for extrudates with brewers' grain content (10%) amounted to 0.85%. It was noted that this may prove the high brittleness of such products, particularly on the outer surface. It was also observed that lower grindability was recorded for samples produced by extrusion at a temperature of 140°C. On the other hand, higher grindability obtained at a temperature of 120°C may facilitate the grinding of such products, which may be particularly important in the production of food batter. Brewers' spent grains used as an addition to corn groats contribute to substantial changes in the extrudates obtained. It is also possible to produce compact extrudates with a brewers' spent grain content of 30%. After grinding, extrudates with higher brewers' spent grain content are distinguished by more rounded grains. The packing index of the samples indicates the increased accuracy of covering products with such batter, which indicates an advantage of food batters containing brewers' spent grains.

Properties of the LiCl-KCl-Li2O system as operating medium for pyro-chemical reprocessing of spent nuclear fuel

NASA Astrophysics Data System (ADS)

Mullabaev, Albert; Tkacheva, Olga; Shishkin, Vladimir; Kovrov, Vadim; Zaikov, Yuriy; Sukhanov, Leonid; Mochalov, Yuriy

2018-03-01

Crystallization temperatures (liquidus and solidus) in the LiCl-Li2O and (LiCl-KCl)-Li2O systems with the KCl content of 10 and 20 mol.% were obtained with independent methods of thermal analysis using cooling curves, isothermal saturation, and differential scanning calorimetry. The linear sweep voltammetry was applied to control the time of the equilibrium establishment in the molten system after the Li2O addition, which depended on the composition of the base melt and the concentration of Li2O. The fragments of the binary LiCl-Li2O and quazi-binary [LiCl-KCl(10 mol.%)]-Li2O and [LiCl-KCl(20 mol.%)]-Li2O phase diagrams in the Li2O concentration range from 0 to 12 mol.% were obtained. The KCl presence in the LiCl-KCl-Li2O molten mixture in the amount of 10 and 20 mol.% reduces the liquidus temperature by 30 and 80°, respectively, but the region of the homogeneous molten state of the system is considerably narrowed, which complicates its practical application. The Li2O solubility in the molten LiCl, LiCl-KCl(10 mol.%) and LiCl-KCl(20 mol.%) decreases with increasing the KCl content and is equal to 11.5, 7.7 and 3.9 mol.% at 650°С, respectively. The LiCl-KCl melt with 10 mol.% KCl can be recommended for practical use as a medium for the SNF pyro-chemical reprocessing at temperature below 700 °C.

Enhanced recycling network for spent e-bicycle batteries: A case study in Xuzhou, China.

PubMed

Chen, Fu; Yang, Baodan; Zhang, Wangyuan; Ma, Jing; Lv, Jie; Yang, Yongjun

2017-02-01

Electric bicycles (e-bicycles) are a primary means of commuting in China because of their light weight, speed, and low maintenance costs. Owing to short service life and environmental pollution hazards, recycling and reuse of e-bicycle batteries has always been a focus of industry and academia. As a typical case of both production and use of large electric bicycles, 113 major sellers, 378 corporate and individual buyers, 147 large e-bicycle repair centers, and 1317 e-bicycle owners in Xuzhou City were investigated in order to understand the sales, use, recycling, and disposal of spent e-bicycle batteries. The findings show that the existing distempered recycling system is the main limitation of spent battery recovery, and the actual recovery rate of spent batteries is lower than the estimated output (QW) for the years 2011-2014. Electric bicycle sellers play a fundamental role in the collection of spent batteries in Xuzhou, accounting for 42.3±8.3% of all batteries recovered. The widespread use of lithium batteries in recent years has resulted in a reduction in spent battery recycling because of lower battery prices. Furthermore, consumer preferences are another important factor affecting the actual recovery rate according to survey results evaluated using canonical correspondence analysis. In this paper, we suggest that a reverse logistics network system for spent battery recycling should be established in the future; in addition, enhancing producer responsibility, increasing publicity, raising of public awareness, developing green public transport, and reducing dependence on e-bicycles also should be pursued. This study seeks to provide guidance for planning construction and management policies for an effective spent battery recycling system in China and other developing countries. Copyright © 2016 Elsevier Ltd. All rights reserved.

Selective recovery of molybdenum from spent HDS catalyst using oxidative soda ash leach/carbon adsorption method.

PubMed

Park, Kyung Ho; Mohapatra, D; Reddy, B Ramachandra

2006-11-16

The petroleum refining industry makes extensive use of hydroprocessing catalysts. These catalysts contain environmentally critical and economically valuable metals such as Mo, V, Ni and Co. In the present study, a simple hydrometallurgical processing of spent hydrodesulphurization (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixture was investigated. Recovery of molybdenum was largely dependent on the concentrations of Na2CO3 and H2O2 in the reaction medium, which in turn controls the pH of leach liquor and the presence of Al and Ni as impurities. Under the optimum leaching conditions (40 g L(-1) Na2CO3, 6 vol.% H2O2, room temperature, 1h) about 85% recovery of Mo was achieved. The leach liquor was processed by the carbon adsorption method, which selectively adsorbs Mo at pH around 0.75. Desorption of Mo was selective at 15 vol.% NH4OH. With a single stage contact, it was found possible to achieve >99%, adsorption and desorption efficiency. Using this method, recovery of molybdenum as MoO3 product of 99.4% purity was achieved.

Utilization of spent coffee grounds for isolation and stabilization of Paenibacillus chitinolyticus CKS1 cellulase by immobilization.

PubMed

Buntić, Aneta V; Pavlović, Marija D; Antonović, Dušan G; Šiler-Marinković, Slavica S; Dimitrijević-Branković, Suzana I

2016-08-01

This study has explored the feasibility of using spent coffee grounds as a good supporting material for the Paenibacillus chitinolyticus CKS1 cellulase immobilization. An optimal operational conditions in a batch-adsorption system were found to be: carrier mass of 12 g/L, under the temperature of 45 °C and no pH adjustments. The immobilization yield reached about 71%. An equilibrium establishment between the cellulase and the carrier surface occurred within 45 min, whereas the process kinetics may be predicted by the pseudo-second-order model. An immobilized cellulase preparation expressed very good avicelase activity, this reached up to 2.67 U/g, and revealed an improved storage stability property, compared to free enzyme sample counterpart. The addition of metal ions, such as K(+) and Mg(2+) did not affect positively immobilization yield results, but on the contrary, contributed to an improved bio-activities of the immobilized cellulase, thus may be employed before each enzyme application. The method developed in this study offers a cheap and effective alternative for immediate enzyme isolation from the production medium and its stabilization, compared to other carriers used for the immobilization.

Conversion of spent mushroom substrate to biofertilizer using a stress-tolerant phosphate-solubilizing Pichia farinose FL7.

PubMed

Zhu, Hong-Ji; Sun, Li-Fan; Zhang, Yan-Fei; Zhang, Xiao-Li; Qiao, Jian-Jun

2012-05-01

To develop high-efficient biofertilizer, an environmental stress-tolerant phosphate-solubilizing microorganism (PSM) was isolated from agricultural wastes compost, and then applied to spent mushroom substrate (SMS). The isolate FL7 was identified as Pichia farinose with resistance against multiple environmental stresses, including 5-45°C temperature, 3-10 pH range, 0-23% (w/v) NaCl and 0-6M ammonium ion. Under the optimized cultivation condition, 852.8 mg/l total organic acids can be produced and pH can be reduced to 3.8 after 60 h, meanwhile, the soluble phosphate content reached 816.16 mg/l. The P. farinose was used to convert SMS to a phosphate biofertilizer through a semi-solid fermentation (SSF) process. After fermentation of 10 days, cell density can be increased to 5.6 × 10(8)CFU/g in biomass and pH in this medium can be decreased to 4.0. SMS biofertilizer produced by P. farinose significantly improved the growth of soybean in pot experiments, demonstrating a tremendous potential in agricultural application. Copyright © 2012 Elsevier Ltd. All rights reserved.

Spent coffee grounds, an innovative source of colonic fermentable compounds, inhibit inflammatory mediators in vitro.

PubMed

López-Barrera, Dunia Maria; Vázquez-Sánchez, Kenia; Loarca-Piña, Ma Guadalupe Flavia; Campos-Vega, Rocio

2016-12-01

Spent coffee grounds (SCG), rich in dietary fiber can be fermented by colon microbiota producing short-chain fatty acids (SCFAs) with the ability to prevent inflammation. We investigated SCG anti-inflammatory effects by evaluating its composition, phenolic compounds, and fermentability by the human gut flora, SCFAs production, nitric oxide and cytokine expression of the human gut fermented-unabsorbed-SCG (hgf-NDSCG) fraction in LPS-stimulated RAW 264.7 macrophages. SCG had higher total fiber content compared with coffee beans. Roasting level/intensity reduced total phenolic contents of SCG that influenced its colonic fermentation. Medium roasted hgf-NDSCG produced elevated SCFAs (61:22:17, acetate, propionate and butyrate) after prolonged (24h) fermentation, suppressed NO production (55%) in macrophages primarily by modulating IL-10, CCL-17, CXCL9, IL-1β, and IL-5 cytokines. SCG exerts anti-inflammatory activity, mediated by SCFAs production from its dietary fiber, by reducing the release of inflammatory mediators, providing the basis for SCG use in the control/regulation of inflammatory disorders. The results support the use of SGC in the food industry as dietary fiber source with health benefits. Copyright © 2016 Elsevier Ltd. All rights reserved.

THE ECONOMICS OF REPROCESSING vs DIRECT DISPOSAL OF SPENT NUCLEAR FUEL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthew Bunn; Steve Fetter; John P. Holdren

This report assesses the economics of reprocessing versus direct disposal of spent nuclear fuel. The breakeven uranium price at which reprocessing spent nuclear fuel from existing light-water reactors (LWRs) and recycling the resulting plutonium and uranium in LWRs would become economic is assessed, using central estimates of the costs of different elements of the nuclear fuel cycle (and other fuel cycle input parameters), for a wide range of range of potential reprocessing prices. Sensitivity analysis is performed, showing that the conclusions reached are robust across a wide range of input parameters. The contribution of direct disposal or reprocessing and recyclingmore » to electricity cost is also assessed. The choice of particular central estimates and ranges for the input parameters of the fuel cycle model is justified through a review of the relevant literature. The impact of different fuel cycle approaches on the volume needed for geologic repositories is briefly discussed, as are the issues surrounding the possibility of performing separations and transmutation on spent nuclear fuel to reduce the need for additional repositories. A similar analysis is then performed of the breakeven uranium price at which deploying fast neutron breeder reactors would become competitive compared with a once-through fuel cycle in LWRs, for a range of possible differences in capital cost between LWRs and fast neutron reactors. Sensitivity analysis is again provided, as are an analysis of the contribution to electricity cost, and a justification of the choices of central estimates and ranges for the input parameters. The equations used in the economic model are derived and explained in an appendix. Another appendix assesses the quantities of uranium likely to be recoverable worldwide in the future at a range of different possible future prices.« less

Chemical and process mineralogical characterizations of spent lithium-ion batteries: an approach by multi-analytical techniques.

PubMed

Zhang, Tao; He, Yaqun; Wang, Fangfang; Ge, Linhan; Zhu, Xiangnan; Li, Hong

2014-06-01

Mineral processing operation is a critical step in any recycling process to realize liberation, separation and concentration of the target parts. Developing effective recycling methods to recover all the valuable parts from spent lithium-ion batteries is in great necessity. The aim of this study is to carefully undertake chemical and process mineralogical characterizations of spent lithium-ion batteries by coupling several analytical techniques to provide basic information for the researches on effective mechanical crushing and separation methods in recycling process. The results show that the grade of Co, Cu and Al is fairly high in spent lithium ion batteries and up to 17.62 wt.%, 7.17 wt.% and 21.60 wt.%. Spent lithium-ion batteries have good selective crushing property, the crushed products could be divided into three parts, they are Al-enriched fraction (+2 mm), Cu and Al-enriched fraction (-2+0.25 mm) and Co and graphite-enriched fraction (-0.25 mm). The mineral phase and chemical state analysis reveal the electrode materials recovered from -0.25 mm size fraction keep the original crystal forms and chemical states in lithium-ion batteries, but the surface of the powders has been coated by a certain kind of hydrocarbon. Based on these results a flowsheet to recycle spent LiBs is proposed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cancer communication patterns and the influence of patient characteristics: disparities in information-giving and affective behaviors.

PubMed

Siminoff, Laura A; Graham, Gregory C; Gordon, Nahida H

2006-09-01

To examine whether patient characteristics are associated with communication patterns between oncologists and breast cancer patients. The study was conducted at 14 practices with 58 oncologists with 405 newly diagnosed patients with no prior history of breast cancer. The initial consultation between oncologist and patient was audiotaped and a detailed communication analysis performed. Interviews were conducted with patients and physicians immediately before and after consultations. Disparities were found across all patient demographics. Younger patients asked more questions as did those who were white had more than a high school education and when they reported an income that was high or medium income, compared to low (p<0.01). Patient proactive behavior, such as volunteering information to the physician unasked, was similarly related with all demographic predictors as was physician tendency to ask patients questions. Despite the inherently emotional nature of this encounter, there was surprisingly little overt discussion about how the patient felt about her diagnosis and how she was coping. Both patients and physicians spent time trying to establish an interpersonal relationship with each other, although patients spent more time. Patients differed in the number of relationship building utterances by age, education and income and physicians spent more time engaged in relationship building with white than non-white patients (p<0.01) and more educated and affluent patients (p<0.05). This study indicates that patient demographic factors, such as race, income level, education and age seem to influence the amount of time physicians spend in almost all communication categories with patients. One recurring difference across most communication categories was race. Racial differences occurred in almost every one of the communication categories examined. White patients had many more utterances in almost every communication category than their non-white counterparts. These differences may mean a less adequate decision-making process for patients who are members of racial or ethnic minorities, patients who are less affluent, older, and have less education. This study found that providers communicate differently with patients by age, race, education and income. These differences in communication may lead to disparities in patient outcomes. Communication skills training should explicitly train clinicians to recognize these tendencies. Patients with different demographics characteristics may also required education that is tailored to them.

Fiscal Year (FY) 2017 Activities for the Spent Fuel Nondestructive Assay Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trellue, Holly Renee; Trahan, Alexis Chanel; McMath, Garrett Earl

The main focus of research in the NA-241 spent fuel nondestructive assay (NDA) project in FY17 has been completing the fabrication and testing of two prototype instruments for upcoming spent fuel measurements at the Clab interim storage facility in Sweden. One is a passive instrument: Differential Die-away Self Interrogation-Passive Neutron Albedo Reactivity (DDSI), and one is an active instrument: Differential Die-Away-Californium Interrogation with Prompt Neutron (DDA). DDSI was fabricated and tested with fresh fuel at Los Alamos National Laboratory in FY15 and FY16, then shipped to Sweden at the beginning of FY17. Research was performed in FY17 to simplify resultsmore » from the data acquisition system, which is complex because signals from 56 different 3He detectors must be processed using list mode data. The DDA instrument was fabricated at the end of FY16. New high count rate electronics better suited for a spent fuel environment (i.e., KM-200 preamplifiers) were built specifically for this instrument in FY17, and new Tygon tubing to house electrical cables was purchased and installed. Fresh fuel tests using the DDA instrument with numerous configurations of fuel rods containing depleted uranium (DU), low enriched uranium (LEU), and LEU with burnable poisons (Gd) were successfully performed and compared to simulations.1 Additionally, members of the spent fuel NDA project team travelled to Sweden for a “spent fuel characterization and decay heat” workshop involving simulations of spent fuel and analysis of uncertainties in decay heat calculations.« less

The impact of a Critical Care Information System (CCIS) on time spent charting and in direct patient care by staff in the ICU: a review of the literature.

PubMed

Mador, Rebecca L; Shaw, Nicola T

2009-07-01

The introduction of a Critical Care Information System (CCIS) into an intensive care unit (ICU) is purported to reduce the time health care providers (HCP) spend on documentation and increase the time available for direct patient care. However, there is a paucity of rigorous empirical research that has investigated these assertions. Moreover, those studies that have sought to elucidate the relationship between the introduction of a CCIS and the time spent by staff on in/direct patient care activities have published contradictory findings. The objective of this literature review is to establish the impact of a CCIS on time spent documenting and in direct patient care by staff in the ICU. Five electronic databases were searched including PubMed Central, EMBASE, CINAHL, IEEE Xplore, and the Cochrane Database of Systematic Reviews. Reference lists of all published papers were hand searched, and citations reviewed to identify extra papers. We included studies that were empirical articles, published in English, and provided original data on the impact of a CCIS on time spent documenting and in direct patient care by staff in the ICU. In total, 12 articles met the inclusion criteria. Workflow analysis (66%) and time-and-motion analysis (25%) were the most common forms of data collection. Three (25%) studies found an increase in time spent charting, five (42%) found no difference, and four (33%) studies reported a decrease. Results on the impact of a CCIS on direct patient care were similarly inconclusive. Due to the discrepant findings and several key methodological issues, the impact of a CCIS on time spent charting and in direct patient care remains unclear. This review highlights the need for an increase in rigorous empirical research in this area and provides recommendations for the design and implementation of future studies.

Determination of plutonium in spent nuclear fuel using high resolution X-ray

DOE PAGES

McIntosh, Kathryn G.; Reilly, Sean D.; Havrilla, George J.

2015-05-30

Characterization of Pu is an essential aspect of safeguards operations at nuclear fuel reprocessing facilities. A novel analysis technique called hiRX (high resolution X-ray) has been developed for the direct measurement of Pu in spent nuclear fuel dissolver solutions. hiRX is based on monochromatic wavelength dispersive X-ray fluorescence (MWDXRF), which provides enhanced sensitivity and specificity compared with conventional XRF techniques. A breadboard setup of the hiRX instrument was calibrated using spiked surrogate spent fuel (SSF) standards prepared as dried residues. Samples of actual spent fuel were utilized to evaluate the performance of the hiRX. The direct detection of just 39more » ng of Pu is demonstrated. Initial quantitative results, with error of 4–27% and precision of 2% relative standard deviation (RSD), were obtained for spent fuel samples. The limit of detection for Pu (100 s) within an excitation spot of 200 μm diameter was 375 pg. This study demonstrates the potential for the hiRX technique to be utilized for the rapid, accurate, and precise determination of Pu. Moreover, the results highlight the analytical capability of hiRX for other applications requiring sensitive and selective nondestructive analyses.« less

Corrosion and Microstructure Correlation in Molten LiCl-KCl Medium

NASA Astrophysics Data System (ADS)

Ravi Shankar, A.; Mathiya, S.; Thyagarajan, K.; Kamachi Mudali, U.

2010-07-01

Pyrochemical reprocessing in molten chloride salt medium has been considered as one of the best options for the reprocessing of spent metallic fuels of future fast breeder reactors. The unit operations such as salt preparation, electrorefining, and cathode processing involve the presence of molten LiCl-KCl eutectic salt from 673 to 1373 K (400 to 1100 °C). The present work discusses the corrosion behavior of electroformed nickel (EF Ni) without and with nickel-tungsten (Ni-W) coating, 316L SS, and INCONEL 625 alloy in molten LiCl-KCl eutectic salt at 673 K, 773 K, and 873 K (400 °C, 500 °C, and 600 °C) in the presence of air. The weight percent loss of the exposed samples was determined by the weight loss method and surface morphology of the salt exposed, and product layers were examined by scanning electron microscopy (SEM). X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) analysis were also carried out on the exposed and corrosion product layers to understand the phases present and the corrosion mechanism involved. The results of the present study indicated that INCONEL 625 alloy showed superior corrosion resistance compared to electroformed nickel (EF Ni), EF Ni with nickel-tungsten (Ni-W) coating (EF Ni-W), and 316L SS. The EF Ni with Ni-W coating exhibits better corrosion resistance than EF Ni without tungsten coating. Based on the surface morphology, XRD, and EDX analysis of corrosion product layers, the mechanism of corrosion of INCONEL 625 and 316L involves formation of chromium-rich compound at the surface and subsequent spallation. For the EF Ni, the porous thick NiO corrosion product allows the penetration of salt, thus accelerating the corrosion. Improved corrosion resistance of EF Ni-W was attributed to the W-rich NiO layer, while for INCONEL 625, the adherent and protective NiO layer improved the corrosion resistance. The article highlights the results of the present investigation.

Used Nuclear Fuel-Storage, Transportation & Disposal Analysis Resource and Data System (UNF-ST&DARDS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Banerjee, Kaushik; Clarity, Justin B; Cumberland, Riley M

This will be licensed via RSICC. A new, integrated data and analysis system has been designed to simplify and automate the performance of accurate and efficient evaluations for characterizing the input to the overall nuclear waste management system -UNF-Storage, Transportation & Disposal Analysis Resource and Data System (UNF-ST&DARDS). A relational database within UNF-ST&DARDS provides a standard means by which UNF-ST&DARDS can succinctly store and retrieve modeling and simulation (M&S) parameters for specific spent nuclear fuel analysis. A library of various analysis model templates provides the ability to communicate the various set of M&S parameters to the most appropriate M&S application.more » Interactive visualization capabilities facilitate data analysis and results interpretation. UNF-ST&DARDS current analysis capabilities include (1) assembly-specific depletion and decay, (2) and spent nuclear fuel cask-specific criticality and shielding. Currently, UNF-ST&DARDS uses SCALE nuclear analysis code system for performing nuclear analysis.« less

Hazard Analysis of Pollution Abatement Techniques. Volume I

DTIC Science & Technology

1974-06-01

present hazards during startup/shutdown operations when filling or emptying the diatomaceous earth filters, or when filling or emptying the carbon...columns. Frictional initi- I ation modes can occur in the filter due to movement of diatomaceous earth 1< over a sufficiently dry TN~T layer. nie b...said operation. .,I addition, contaminaited diatomaceous earth should not be handled in a dry condition. Spent carbon, as well as spent earth , should be

Information as Power: An Anthology of Selected United States Army War College Student Papers. Volume 6

DTIC Science & Technology

2012-05-01

Doing stuff” doesn’t sell well without the “so what.” Quickly seizing this fact one skeptic caustically derided, 73Information Effects in the...operations (IO) programs. The Committee has serious concerns about…the significant amount of funding being spent on these programs....The Committee...When assessing operations, JFCs [joint force commanders] and staff’s should avoid excessive analysis. Excessive time and energy spent developing

Nuclear Dynamics Consequence Analysis (NDCA) for the Disposal of Spent Nuclear Fuel in an Underground Geologic Repository--Volume 2: Methodology and Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, L.L.; Wilson, J.R.; Sanchez, L.C.

1998-10-01

The US Department of Energy Office of Environmental Management's (DOE/EM's) National Spent Nuclear Fuel Program (NSNFP), through a collaboration between Sandia National Laboratories (SNL) and Idaho National Engineering and Environmental Laboratory (INEEL), is conducting a systematic Nuclear Dynamics Consequence Analysis (NDCA) of the disposal of SNFs in an underground geologic repository sited in unsaturated tuff. This analysis is intended to provide interim guidance to the DOE for the management of the SNF while they prepare for final compliance evaluation. This report presents results from a Nuclear Dynamics Consequence Analysis (NDCA) that examined the potential consequences and risks of criticality duringmore » the long-term disposal of spent nuclear fuel owned by DOE-EM. This analysis investigated the potential of post-closure criticality, the consequences of a criticality excursion, and the probability frequency for post-closure criticality. The results of the NDCA are intended to provide the DOE-EM with a technical basis for measuring risk which can be used for screening arguments to eliminate post-closure criticality FEPs (features, events and processes) from consideration in the compliance assessment because of either low probability or low consequences. This report is composed of an executive summary (Volume 1), the methodology and results of the NDCA (Volume 2), and the applicable appendices (Volume 3).« less

N 2 gas is an effective fertilizer for bioethanol production by Zymomonas mobilis

DOE PAGES

Kremer, Timothy A.; LaSarre, Breah; Posto, Amanda L.; ...

2015-02-02

A nascent cellulosic ethanol industry is struggling to become cost-competitive against corn ethanol and gasoline. Millions of dollars are spent on nitrogen supplements to make up for the low nitrogen content of the cellulosic feedstock. In this paper, we show for the first time to our knowledge that the ethanol-producing bacterium, Zymomonas mobilis, can use N 2 gas in lieu of traditional nitrogen supplements. Despite being an electron-intensive process, N 2 fixation by Z. mobilis did not divert electrons away from ethanol production, as the ethanol yield was greater than 97% of the theoretical maximum. In a defined medium, Z.more » mobilis produced ethanol 50% faster per cell and generated half the unwanted biomass when supplied N 2 instead of ammonium. In a cellulosic feedstock-derived medium, Z. mobilis achieved a similar cell density and a slightly higher ethanol yield when supplied N 2 instead of the industrial nitrogen supplement, corn steep liquor. Finally, we estimate that N 2-utilizing Z. mobilis could save a cellulosic ethanol production facility more than $1 million/y.« less

N2 gas is an effective fertilizer for bioethanol production by Zymomonas mobilis

PubMed Central

Kremer, Timothy A.; LaSarre, Breah; Posto, Amanda L.; McKinlay, James B.

2015-01-01

A nascent cellulosic ethanol industry is struggling to become cost-competitive against corn ethanol and gasoline. Millions of dollars are spent on nitrogen supplements to make up for the low nitrogen content of the cellulosic feedstock. Here we show for the first time to our knowledge that the ethanol-producing bacterium, Zymomonas mobilis, can use N2 gas in lieu of traditional nitrogen supplements. Despite being an electron-intensive process, N2 fixation by Z. mobilis did not divert electrons away from ethanol production, as the ethanol yield was greater than 97% of the theoretical maximum. In a defined medium, Z. mobilis produced ethanol 50% faster per cell and generated half the unwanted biomass when supplied N2 instead of ammonium. In a cellulosic feedstock-derived medium, Z. mobilis achieved a similar cell density and a slightly higher ethanol yield when supplied N2 instead of the industrial nitrogen supplement, corn steep liquor. We estimate that N2-utilizing Z. mobilis could save a cellulosic ethanol production facility more than $1 million/y. PMID:25646422

Removal of lead from aqueous solutions with a treated spent bleaching earth.

PubMed

Mana, Mohamed; Ouali, Mohand Said; Lindheimer, Marc; Menorval, Louis Charles de

2008-11-30

A spent bleaching earth from an edible oil refinery has been treated by impregnation with a normal sodium hydroxide solution followed by mild thermal treatment (100 degrees C). The obtained material (TSBE) was washed, dried and characterized by X-ray diffraction, FTIR, SEM, BET and thermal analysis. The clay structure was not apparently affected by the treatment and the impregnated organic matter was quantitatively removed. We have investigated the sorption of lead on this material, the spent bleaching earth (SBE) and the virgin bleaching earth (VBE). The kinetic results fit the pseudo second-order kinetic model and the Weber & Morris, intraparticle diffusion model. The pH had effect on the sorption efficiency. The sorption isotherms followed the Langmuir model for various sorbent concentrations with good values of determination coefficient. A comparison between the results obtained with this material and those of the literature highlighted a good removal capacity of the treated spent bleaching earth at low cost.

An eco-balance of a recycling plant for spent lead-acid batteries.

PubMed

Salomone, Roberta; Mondello, Fabio; Lanuzza, Francesco; Micali, Giuseppe

2005-02-01

This study applies Life Cycle Assessment (LCA) methodology to present an eco-balance of a recycling plant that treats spent lead-acid batteries. The recycling plant uses pyrometallurgical treatment to obtain lead from spent batteries. The application of LCA methodology (ISO 14040 series) enabled us to assess the potential environmental impacts arising from the recycling plant's operations. Thus, net emissions of greenhouse gases as well as other major environmental consequences were examined and hot spots inside the recycling plant were identified. A sensitivity analysis was also performed on certain variables to evaluate their effect on the LCA study. The LCA of a recycling plant for spent lead-acid batteries presented shows that this methodology allows all of the major environmental consequences associated with lead recycling using the pyrometallurgical process to be examined. The study highlights areas in which environmental improvements are easily achievable by a business, providing a basis for suggestions to minimize the environmental impact of its production phases, improving process and company performance in environmental terms.

Characterization of neutron sources from spent fuel casks. [Skyshine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parks, C.V.; Pace, J.V. III

1987-01-01

In the interim period prior to the acceptance of spent fuel for disposal by the USDOE, utilities are beginning to choose dry cask storage as an alternative to pool re-racking, transshipments, or new pool construction. In addition, the current MRS proposal calls for interim dry storage of consolidated spent fuel in concrete casks. As part of the licensing requirements for these cask storage facilities, calculations are typically necessary to determine the yearly radiation dose received at the site boundary. Unlike wet facilities, neutron skyshine can be an important contribution to the total boundary dose from a dry storage facility. Calculationmore » of the neutron skyshine is in turn heavily dependent on the source characteristics and source model selected for the analysis. This paper presents the basic source characteristics of the spent fuel stored in dry casks and discusses factors that must be considered in evaluating and modeling the radiation sources for the subsequent skyshine calculation. 4 refs., 1 tab.« less

Uranium oxide fuel cycle analysis in VVER-1000 with VISTA simulation code

NASA Astrophysics Data System (ADS)

Mirekhtiary, Seyedeh Fatemeh; Abbasi, Akbar

2018-02-01

The VVER-1000 Nuclear power plant generates about 20-25 tons of spent fuel per year. In this research, the fuel transmutation of Uranium Oxide (UOX) fuel was calculated by using of nuclear fuel cycle simulation system (VISTA) code. In this simulation, we evaluated the back end components fuel cycle. The back end component calculations are Spent Fuel (SF), Actinide Inventory (AI) and Fission Product (FP) radioisotopes. The SF, AI and FP values were obtained 23.792178 ton/y, 22.811139 ton/y, 0.981039 ton/y, respectively. The obtained value of spent fuel, major actinide, and minor actinide and fission products were 23.8 ton/year, 22.795 ton/year, 0.024 ton/year and 0.981 ton/year, respectively.

Chemical and petrochemical industry

NASA Astrophysics Data System (ADS)

Staszak, Katarzyna

2018-03-01

The potential sources of various metals in chemical and petrochemical processes are discussed. Special emphasis is put on the catalysts used in the industry. Their main applications, compositions, especially metal contents are presented both for fresh and spent ones. The focus is on the main types of metals used in catalysts: the platinum-group metals, the rare-earth elements, and the variety of transition metals. The analysis suggested that chemical and petrochemical sectors can be considered as the secondary source of metals. Because the utilization of spent refinery catalysts for metal recovery is potentially viable, different methods were applied. The conventional approaches used in metal reclamation as hydrometallurgy and pyrometallurgy, as well as new methods include bioleaching, were described. Some industrial solutions for metal recovery from spent solution were also presented.

Diversity in Older Adults' Use of the Internet: Identifying Subgroups Through Latent Class Analysis.

PubMed

van Boekel, Leonieke C; Peek, Sebastiaan Tm; Luijkx, Katrien G

2017-05-24

As for all individuals, the Internet is important in the everyday life of older adults. Research on older adults' use of the Internet has merely focused on users versus nonusers and consequences of Internet use and nonuse. Older adults are a heterogeneous group, which may implicate that their use of the Internet is diverse as well. Older adults can use the Internet for different activities, and this usage can be of influence on benefits the Internet can have for them. The aim of this paper was to describe the diversity or heterogeneity in the activities for which older adults use the Internet and determine whether diversity is related to social or health-related variables. We used data of a national representative Internet panel in the Netherlands. Panel members aged 65 years and older and who have access to and use the Internet were selected (N=1418). We conducted a latent class analysis based on the Internet activities that panel members reported to spend time on. Second, we described the identified clusters with descriptive statistics and compared the clusters using analysis of variance (ANOVA) and chi-square tests. Four clusters were distinguished. Cluster 1 was labeled as the "practical users" (36.88%, n=523). These respondents mainly used the Internet for practical and financial purposes such as searching for information, comparing products, and banking. Respondents in Cluster 2, the "minimizers" (32.23%, n=457), reported lowest frequency on most Internet activities, are older (mean age 73 years), and spent the smallest time on the Internet. Cluster 3 was labeled as the "maximizers" (17.77%, n=252); these respondents used the Internet for various activities, spent most time on the Internet, and were relatively younger (mean age below 70 years). Respondents in Cluster 4, the "social users," mainly used the Internet for social and leisure-related activities such as gaming and social network sites. The identified clusters significantly differed in age (P<.001, ω 2 =0.07), time spent on the Internet (P<.001, ω 2 =0.12), and frequency of downloading apps (P<.001, ω 2 =0.14), with medium to large effect sizes. Social and health-related variables were significantly different between the clusters, except social and emotional loneliness. However, effect sizes were small. The minimizers scored significantly lower on psychological well-being, instrumental activities of daily living (iADL), and experienced health compared with the practical users and maximizers. Older adults are a diverse group in terms of their activities on the Internet. This underlines the importance to look beyond use versus nonuse when studying older adults' Internet use. The clusters we have identified in this study can help tailor the development and deployment of eHealth intervention to specific segments of the older population. ©Leonieke C van Boekel, Sebastiaan TM Peek, Katrien G Luijkx. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 24.05.2017.

Diversity in Older Adults’ Use of the Internet: Identifying Subgroups Through Latent Class Analysis

PubMed Central

van Boekel, Leonieke C; Peek, Sebastiaan TM; Luijkx, Katrien G

2017-01-01

Background As for all individuals, the Internet is important in the everyday life of older adults. Research on older adults’ use of the Internet has merely focused on users versus nonusers and consequences of Internet use and nonuse. Older adults are a heterogeneous group, which may implicate that their use of the Internet is diverse as well. Older adults can use the Internet for different activities, and this usage can be of influence on benefits the Internet can have for them. Objective The aim of this paper was to describe the diversity or heterogeneity in the activities for which older adults use the Internet and determine whether diversity is related to social or health-related variables. Methods We used data of a national representative Internet panel in the Netherlands. Panel members aged 65 years and older and who have access to and use the Internet were selected (N=1418). We conducted a latent class analysis based on the Internet activities that panel members reported to spend time on. Second, we described the identified clusters with descriptive statistics and compared the clusters using analysis of variance (ANOVA) and chi-square tests. Results Four clusters were distinguished. Cluster 1 was labeled as the “practical users” (36.88%, n=523). These respondents mainly used the Internet for practical and financial purposes such as searching for information, comparing products, and banking. Respondents in Cluster 2, the “minimizers” (32.23%, n=457), reported lowest frequency on most Internet activities, are older (mean age 73 years), and spent the smallest time on the Internet. Cluster 3 was labeled as the “maximizers” (17.77%, n=252); these respondents used the Internet for various activities, spent most time on the Internet, and were relatively younger (mean age below 70 years). Respondents in Cluster 4, the “social users,” mainly used the Internet for social and leisure-related activities such as gaming and social network sites. The identified clusters significantly differed in age (P<.001, ω2=0.07), time spent on the Internet (P<.001, ω2=0.12), and frequency of downloading apps (P<.001, ω2=0.14), with medium to large effect sizes. Social and health-related variables were significantly different between the clusters, except social and emotional loneliness. However, effect sizes were small. The minimizers scored significantly lower on psychological well-being, instrumental activities of daily living (iADL), and experienced health compared with the practical users and maximizers. Conclusions Older adults are a diverse group in terms of their activities on the Internet. This underlines the importance to look beyond use versus nonuse when studying older adults’ Internet use. The clusters we have identified in this study can help tailor the development and deployment of eHealth intervention to specific segments of the older population. PMID:28539302

Workplace interventions for reducing sitting at work.

PubMed

Shrestha, Nipun; Kukkonen-Harjula, Katriina T; Verbeek, Jos H; Ijaz, Sharea; Hermans, Veerle; Pedisic, Zeljko

2018-06-20

A large number of people are employed in sedentary occupations. Physical inactivity and excessive sitting at workplaces have been linked to increased risk of cardiovascular disease, obesity, and all-cause mortality. To evaluate the effectiveness of workplace interventions to reduce sitting at work compared to no intervention or alternative interventions. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, Embase, CINAHL, OSH UPDATE, PsycINFO, ClinicalTrials.gov, and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP) search portal up to 9 August 2017. We also screened reference lists of articles and contacted authors to find more studies. We included randomised controlled trials (RCTs), cross-over RCTs, cluster-randomised controlled trials (cluster-RCTs), and quasi-RCTs of interventions to reduce sitting at work. For changes of workplace arrangements, we also included controlled before-and-after studies. The primary outcome was time spent sitting at work per day, either self-reported or measured using devices such as an accelerometer-inclinometer and duration and number of sitting bouts lasting 30 minutes or more. We considered energy expenditure, total time spent sitting (including sitting at and outside work), time spent standing at work, work productivity and adverse events as secondary outcomes. Two review authors independently screened titles, abstracts and full-text articles for study eligibility. Two review authors independently extracted data and assessed risk of bias. We contacted authors for additional data where required. We found 34 studies - including two cross-over RCTs, 17 RCTs, seven cluster-RCTs, and eight controlled before-and-after studies - with a total of 3,397 participants, all from high-income countries. The studies evaluated physical workplace changes (16 studies), workplace policy changes (four studies), information and counselling (11 studies), and multi-component interventions (four studies). One study included both physical workplace changes and information and counselling components. We did not find any studies that specifically investigated the effects of standing meetings or walking meetings on sitting time.Physical workplace changesInterventions using sit-stand desks, either alone or in combination with information and counselling, reduced sitting time at work on average by 100 minutes per workday at short-term follow-up (up to three months) compared to sit-desks (95% confidence interval (CI) -116 to -84, 10 studies, low-quality evidence). The pooled effect of two studies showed sit-stand desks reduced sitting time at medium-term follow-up (3 to 12 months) by an average of 57 minutes per day (95% CI -99 to -15) compared to sit-desks. Total sitting time (including sitting at and outside work) also decreased with sit-stand desks compared to sit-desks (mean difference (MD) -82 minutes/day, 95% CI -124 to -39, two studies) as did the duration of sitting bouts lasting 30 minutes or more (MD -53 minutes/day, 95% CI -79 to -26, two studies, very low-quality evidence).We found no significant difference between the effects of standing desks and sit-stand desks on reducing sitting at work. Active workstations, such as treadmill desks or cycling desks, had unclear or inconsistent effects on sitting time.Workplace policy changesWe found no significant effects for implementing walking strategies on workplace sitting time at short-term (MD -15 minutes per day, 95% CI -50 to 19, low-quality evidence, one study) and medium-term (MD -17 minutes/day, 95% CI -61 to 28, one study) follow-up. Short breaks (one to two minutes every half hour) reduced time spent sitting at work on average by 40 minutes per day (95% CI -66 to -15, one study, low-quality evidence) compared to long breaks (two 15-minute breaks per workday) at short-term follow-up.Information and counsellingProviding information, feedback, counselling, or all of these resulted in no significant change in time spent sitting at work at short-term follow-up (MD -19 minutes per day, 95% CI -57 to 19, two studies, low-quality evidence). However, the reduction was significant at medium-term follow-up (MD -28 minutes per day, 95% CI -51 to -5, two studies, low-quality evidence).Computer prompts combined with information resulted in no significant change in sitting time at work at short-term follow-up (MD -10 minutes per day, 95% CI -45 to 24, two studies, low-quality evidence), but at medium-term follow-up they produced a significant reduction (MD -55 minutes per day, 95% CI -96 to -14, one study). Furthermore, computer prompting resulted in a significant decrease in the average number (MD -1.1, 95% CI -1.9 to -0.3, one study) and duration (MD -74 minutes per day, 95% CI -124 to -24, one study) of sitting bouts lasting 30 minutes or more.Computer prompts with instruction to stand reduced sitting at work on average by 14 minutes per day (95% CI 10 to 19, one study) more than computer prompts with instruction to walk at least 100 steps at short-term follow-up.We found no significant reduction in workplace sitting time at medium-term follow-up following mindfulness training (MD -23 minutes per day, 95% CI -63 to 17, one study, low-quality evidence). Similarly a single study reported no change in sitting time at work following provision of highly personalised or contextualised information and less personalised or contextualised information. One study found no significant effects of activity trackers on sitting time at work.Multi-component interventions Combining multiple interventions had significant but heterogeneous effects on sitting time at work (573 participants, three studies, very low-quality evidence) and on time spent in prolonged sitting bouts (two studies, very low-quality evidence) at short-term follow-up. At present there is low-quality evidence that the use of sit-stand desks reduce workplace sitting at short-term and medium-term follow-ups. However, there is no evidence on their effects on sitting over longer follow-up periods. Effects of other types of interventions, including workplace policy changes, provision of information and counselling, and multi-component interventions, are mostly inconsistent. The quality of evidence is low to very low for most interventions, mainly because of limitations in study protocols and small sample sizes. There is a need for larger cluster-RCTs with longer-term follow-ups to determine the effectiveness of different types of interventions to reduce sitting time at work.

Physical activity, sedentary behavior time and lipid levels in the Observation of Cardiovascular Risk Factors in Luxembourg study.

PubMed

Crichton, Georgina E; Alkerwi, Ala'a

2015-08-11

Recently attention has been drawn to the health impacts of time spent engaging in sedentary behaviors. While many studies have investigated general physical activity (PA) in relation to blood lipid levels, the current study aimed to examine the intensity of activity, including sedentary behavior time, and time spent engaging in moderate and intense PA, with concentrations of HDL and LDL-cholesterol, total cholesterol, and triglycerides. Participants comprised 1331 individuals, aged 18 to 70 years, from the Observation of Cardiovascular Risk Factors in Luxembourg (ORISCAV-LUX) study, who underwent objective cardiovascular health assessments and completed the International Physical Activity Questionnaire (IPAQ). Time spent engaging in sedentary behaviors (screen time on a workday and a day off, and total sitting time on a work day), and moderate and intense PA, were related to levels of HDL and LDL-cholesterol, total cholesterol, and triglycerides. Analyses were conducted in the whole sample, and then with stratification according to BMI (normal weight versus overweight/obese). Both lower screen time during days off and higher intense PA time were significantly associated with higher HDL-cholesterol after full adjustment for socio-demographic factors, dietary factors and smoking (both p < 0.05). In normal weight individuals, consistent positive relations between triglycerides, LDL, and total cholesterol with all sedentary behavior time variables were observed (all p < 0.05; adjusted for age, education, gender). There were no statistically significant associations between any intensity level of PA or sedentary behavior time variable and lipid levels in those overweight or obese. Spending less time in sedentary behaviors, and engaging in medium levels of intense physical activity may be associated with a more favorable blood lipid profile, particularly with regard to levels of HDL and triglycerides.

Changes in physical activity levels, lesson context, and teacher interaction during physical education in culturally and linguistically diverse Australian schools.

PubMed

Dudley, Dean A; Okely, Anthony D; Pearson, Philip; Cotton, Wayne G; Caputi, Peter

2012-09-18

Recent data show that only 15% of Australian adolescents participate in adequate amounts of physical activity (PA) and those students from Asian and Middle-Eastern backgrounds in Grades 6-12 are significantly less active than their English-speaking background peers. Schools have recently been recognised as the most widely used and cost-effective setting for promoting PA among youth and one domain within schools where PA can occur regularly for all youth, regardless of cultural background or socio-economic status, is during physical education (PE). This study describes changes in physical activity (PA), lesson context and teacher interaction in physical education over the first two years in culturally and linguistically diverse secondary schools. Grade 7 PE classes in six schools were randomly observed using systematic direct observation (n = 81) and then followed up over the same period (n = 51) twelve months later. There was no significant decline in moderate-to-vigorous physical activity (MVPA) during PE (MD = -4.8%; p = .777), but a significant decline and medium negative effect in time spent in vigorous physical activity (VPA) (MD = -7.9%; p = .009) during PE was observed. Significant declines and large negative effects over time in percentage of PE time spent in management (MD = -8.8%; p < .001) and the number of observations where teachers promoted PA (MD = -20.7%; p < .001). The decline of VPA and teacher promotion of PA in culturally and linguistically diverse schools is of concern. Given the declines in VPA and the increases in time spent in game play, further research is needed to ascertain whether PE instruction could be improved by focussing on skill instruction and fitness in a games-based PE instruction model. Further research for increasing teacher promotion of PA during PE is needed.

The effect of an occupational therapy mental health day treatment centre on the use of inpatient services in the Western Cape, South Africa.

PubMed

Engelbrecht, Riekie; Plastow, Nicola; Botha, Ulla; Niehaus, Djh; Koen, Liezl

2018-04-27

The aim of this study was to determine whether attendance at an occupational therapy-led day treatment centre for mental health care users affects the use of inpatient services in South Africa. A retrospective pre-test/post-test quasi-experimental study design was used to compare admissions and days spent in hospital during the 24 months before and after attendance at the centre, using the hospital's electronic records. Total population sampling yielded data for 44 mental health care users who made first contact with the service between July 2009 and June 2010. Data were compared using the Kruskal-Wallis test, Wilcoxon Signed Ranks test and Mann-Whitney U test. There was a significant decrease in the number of admissions (z = -4.093, p = 0.00) and the number of days spent in hospital (z = -4.730, p = 0.00). Participants were admitted to psychiatric care 33 times less in the 24 months' post-intervention, indicating a medium effect (r = 0.436). They also spend 2569 days less in hospital, indicating a large effect (r = 0.504). The findings suggest that an occupational therapy-led day treatment centre could be effective in reducing the use of inpatient mental health services in South Africa. Implications for Rehabilitation Attendance at an occupational therapy-led community day treatment centre decreases the number of admissions and number of days spent in hospital and is therefore beneficial to mental health care users and service providers. The study indicates that the successful implementation of a community day treatment centre for mental health care users on the grounds of a tertiary hospital by utilising existing resources is possible.

Proof of concept: preimplantation genetic screening without embryo biopsy through analysis of cell-free DNA in spent embryo culture media.

PubMed

Shamonki, Mousa I; Jin, Helen; Haimowitz, Zachary; Liu, Lian

2016-11-01

To assess whether preimplantation genetic screening (PGS) is possible by testing for free embryonic DNA in spent IVF media from embryos undergoing trophectoderm biopsy. Prospective cohort analysis. Academic fertility center. Seven patients undergoing IVF and 57 embryos undergoing trophectoderm biopsy for PGS. On day 3 of development, each embryo was placed in a separate media droplet. All biopsied embryos received a PGS result by array comparative genomic hybridization. Preimplantation genetic screening was performed on amplified DNA extracted from media and results were compared with PGS results for the corresponding biopsy. [1] Presence of DNA in spent IVF culture media. [2] Correlation between genetic screening result from spent media and corresponding biopsy. Fifty-five samples had detectable DNA ranging from 2-642 ng/μL after a 2-hour amplification. Six samples with the highest DNA levels underwent PGS, rendering one result with a derivative log ratio SD (DLRSD) of <0.85 (a quality control metric of oligonucleotide array comparative genomic hybridization). The fluid sample and trophectoderm results were identical demonstrating (45XY, -13). Three samples were reamplified 1 hour later and tested showing improving DLRSD. One of the three samples with a DLRSD of 0.85 demonstrated (46XY), consistent with the biopsy. Overnight DNA amplification showed DNA in all samples. We demonstrate two novel findings: the presence of free embryonic DNA in spent media and a result that is consistent with trophectoderm biopsy. Improvements in DNA collection, amplification, and testing may allow for PGS without biopsy in the future. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Content of conventional therapy for the severely affected arm during subacute rehabilitation after stroke: An analysis of physiotherapy and occupational therapy practice.

PubMed

de Jong, Lex D; van Wijck, Frederike; Stewart, Roy E; Geurts, Alexander C H; Dijkstra, Pieter U

2018-01-01

Physiotherapy (PT) and occupational therapy (OT) are key professions providing treatment for the arm after stroke; however, knowledge about the content of these treatments is scant. Detailed data are needed to replicate interventions, evaluate their effective components, and evaluate PT and OT practice. This paper describes PT and OT treatment for the severely affected arm in terms of duration, content according to components and categories of the International Classification of Human Functioning, Disability and Health, and to analyze differences between professions. Design: This is a retrospective analysis of randomized trial data. 46 patients after stroke with poor arm motor control recruited from inpatient neurological units from three rehabilitation centers in the Netherlands. PTs and OTs recorded duration and content of arm treatment interventions for 8 weeks using a bespoke treatment schedule with 15 International Classification of Human Functioning, Disability and Health categories. PTs and OTs spent on average 4-7 min per treatment session (30 min) on arm treatment. OTs spent significantly more time providing arm treatment and treatment at the activities level than PTs. PTs spent 79% of their arm treatment time on body functions, OTs 41%. OTs spent significantly more time on "moving around using transportation," "self care," and "household tasks" categories. Patients after stroke with a severely affected arm and an unfavorable prognosis for arm motor recovery receive little arm-oriented PT and OT. Therapists spent most arm treatment time on body functions. There was a considerable overlap in the content of PT and OT in 12 of the 15 categories. Results can be generalized only to patients with poor arm motor control and may not represent practice in other countries. Copyright © 2017 John Wiley & Sons, Ltd.

Navy Shipboard Cargo and Weapons Elevator Controller and Sensor Subsystem Problem Analysis.

DTIC Science & Technology

1981-12-24

safe operation, and standardization. The conclusion of the review was that elevator manufact - urers in general have motives in design and construction...controller. Two days are spent on the elevator theory and the rest in hands-on training and trouble-shooting bad cards. There is also a 26-week...was spent on the two computer con- trolled elevators than on all of the remaining 20 freight, food , and weapons elevators on the ship. Phoenix

The United Kingdom’s Naval Shipbuilding Industrial Base: The Next Fifteen Years

DTIC Science & Technology

2005-01-01

the United Kingdom 71 Lauder College are developing improved procedures for selecting and training craft modern apprentices, as well as programmes...Next 15 Years for the names of the suppliers, information on what they provided, and the amount of money spent on them. We also asked the ship- yards...analysis on all money spent on suppliers; (2) ration- alise the supply base, consolidating contracts where possible (and where this fits the legal

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 3A. GSFLS technical analysis (appendix). Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriger, A.

1978-01-31

This report is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. The technical and financial considerations underlying a global spent fuel logistics systems have been studied and are reported. The Pacific Basin is used as a model throughout this report; however the stated methodology and, in many cases, considerations and conclusions are applicable to other global regions. Spent fuel discharge profiles for Pacific Basin Countries were used to determine the technical systems requirements for alternative concepts. Functional analyses and flows were generated to define both system design requirements and logistics parameters. Amore » technology review was made to ascertain the state-of-the-art of relevant GSFLS technical systems. Modular GSFLS facility designs were developed using the information generated from the functional analysis and technology review. The modular facility designs were used as a basis for siting and cost estimates for various GSFLS alternatives. Various GSFLS concepts were analyzed from a financial and economic perspective in order to provide total concepts costs and ascertain financial and economic sensitivities to key GSFLS variations. Results of the study include quantification of GSFLS facility and hardware requirements; drawings of relevant GSFLS facility designs; system cost estimates; financial reports - including user service charges; and comparative analyses of various GSFLS alternatives.« less

Analysis of new measurements of Calvert Cliffs spent fuel samples using SCALE 6.2

DOE PAGES

Hu, Jianwei; Giaquinto, J. M.; Gauld, I. C.; ...

2017-04-28

High quality experimental data for isotopic compositions in irradiated fuel are important to spent fuel applications, including nuclear safeguards, spent fuel storage, transportation, and final disposal. The importance of these data has been increasingly recognized in recent years, particularly as countries like Finland and Sweden plan to open the world’s first two spent fuel geological repositories in 2020s, while other countries, including the United States, are considering extended dry fuel storage options. Destructive and nondestructive measurements of a spent fuel rod segment from a Combustion Engineering 14 × 14 fuel assembly of the Calvert Cliffs Unit 1 nuclear reactor havemore » been recently performed at Oak Ridge National Laboratory (ORNL). These ORNL measurements included two samples selected from adjacent axial locations of a fuel rod with initial enrichment of 3.038 wt% 235U, which achieved burnups close to 43.5 GWd/MTU. More than 50 different isotopes of 16 elements were measured using high precision measurement methods. Various investigations have assessed the quality of the new ORNL measurement data, including comparison to previous measurements and to calculation results. Previous measurement data for samples from the same fuel rod measured at ORNL are available from experiments performed at Pacific Northwest National Laboratory in the United States and the Khoplin Radium Institute in Russia. Detailed assembly models were developed using the newly released SCALE 6.2 code package to simulate depletion and decay of the measured fuel samples. Furthermore, results from this work show that the new ORNL measurements provide a good quality radiochemical assay data set for spent fuel with relatively high burnup and long cooling time, and they can serve as good benchmark data for nuclear burnup code validation and spent fuel studies.« less

l-fenfluramine in tests of dominance and anxiety in the rat.

PubMed

File, S E; Guardiola-Lemaitre, B J

1988-01-01

l-Fenfluramine (1.25 and 2.5 mg/kg) significantly reduced the success of dominant rats competing with untreated middle rank rats for chocolate. In resident rats, l-fenfluramine (2.5 mg/kg) significantly increased the number of submissions, and the time spent submitting, to untreated rats intruding into their home-cage territory; it also significantly reduced the number of kicks directed at, and the time spent kicking, the intruder; and the incidence of, and time spent in, aggressively grooming the intruder. When the intruder rats were treated with l-fenfluramine the only significantly change was a decrease in the number of wrestling bouts and the time spent wrestling. Since l-fenfluramine did not change other behaviours in this test (e.g. sniffing the opponent) the decrease in dominance behaviours was probably not secondary to nonspecific sedation. In the social interaction test of anxiety, l-fenfluramine (2.5 and 5 mg/kg) significantly reduced the time spent in active social interaction, and decreased motor activity. Analyses of covariance indicated that these were two independent effects. In the elevated plus-maze, l-fenfluramine (1.25-5 mg/kg) significantly decreased the percent number of entries made onto open arms, and (2.5 and 5 mg/kg) significantly decreased the percent of times spent on the open arms. The total number of arm entries was reduced by all doses (0.625-5 mg/kg). Analysis of covariance indicated that the decrease in percent of time spent on the open arms was secondary to the drop in overall activity. Thus there was no evidence of anxiolytic action in either of these tests, the changes indicating, if anything, anxiogenic effects.(ABSTRACT TRUNCATED AT 250 WORDS)

Analysis of new measurements of Calvert Cliffs spent fuel samples using SCALE 6.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Jianwei; Giaquinto, J. M.; Gauld, I. C.

High quality experimental data for isotopic compositions in irradiated fuel are important to spent fuel applications, including nuclear safeguards, spent fuel storage, transportation, and final disposal. The importance of these data has been increasingly recognized in recent years, particularly as countries like Finland and Sweden plan to open the world’s first two spent fuel geological repositories in 2020s, while other countries, including the United States, are considering extended dry fuel storage options. Destructive and nondestructive measurements of a spent fuel rod segment from a Combustion Engineering 14 × 14 fuel assembly of the Calvert Cliffs Unit 1 nuclear reactor havemore » been recently performed at Oak Ridge National Laboratory (ORNL). These ORNL measurements included two samples selected from adjacent axial locations of a fuel rod with initial enrichment of 3.038 wt% 235U, which achieved burnups close to 43.5 GWd/MTU. More than 50 different isotopes of 16 elements were measured using high precision measurement methods. Various investigations have assessed the quality of the new ORNL measurement data, including comparison to previous measurements and to calculation results. Previous measurement data for samples from the same fuel rod measured at ORNL are available from experiments performed at Pacific Northwest National Laboratory in the United States and the Khoplin Radium Institute in Russia. Detailed assembly models were developed using the newly released SCALE 6.2 code package to simulate depletion and decay of the measured fuel samples. Furthermore, results from this work show that the new ORNL measurements provide a good quality radiochemical assay data set for spent fuel with relatively high burnup and long cooling time, and they can serve as good benchmark data for nuclear burnup code validation and spent fuel studies.« less

Co-pyrolysis behaviour and kinetic of two typical solid wastes in China and characterisation of activated carbon prepared from pyrolytic char.

PubMed

Ma, Yuhui; Niu, Ruxuan; Wang, Xiaona; Wang, Qunhui; Wang, Xiaoqiang; Sun, Xiaohong

2014-11-01

This is the first study on the co-pyrolysis of spent substrate of Pleurotus ostreatus and coal tar pitch, and the activated carbon prepared from the pyrolytic char. Thermogravimetry (TG) analysis was carried out taking spent substrate, coal tar pitch and spent substrate-coal tar pitch mixture. The activation energies of pyrolysis reactions were obtained via the Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose methods. The kinetic models were determined by the master-plots method. The activated carbons were characterised by N2-adsorption, Fourier transform infrared spectroscopy and X-ray diffraction. Experimental results demonstrated a synergistic effect happened during co-pyrolysis, which was characterised by a decreased maximum decomposition rate and an enhanced char yield. The average activation energies of the pyrolysis reactions of spent substrate, coal tar pitch and the mixture were 115.94, 72.92 and 94.38 kJ mol(-1) for the Flynn-Wall-Ozawa method, and 112.17, 65.62 and 89.91 kJ mol(-1) for the Kissinger-Akahira-Sunose method. The reaction model functions were f(α) = (1-α)(3.42), (1-α)(1.72) and (1-α)(3.07) for spent substrate, coal tar pitch and the mixture, respectively. The mixture char-derived activated carbon had a Brunauer-Emmett-Teller surface area up to 1337 m(2) g(-1) and a total pore volume of 0.680 cm(3) g(-1). Mixing spent substrate with coal tar pitch led to the creation of more micropores and a higher surface area compared with the single spent substrate and coal tar pitch char. Also, the mixture char-derived activated carbon had a higher proportion of aromatic stacking. This study provides a reference for the utilisation of spent substrate and coal tar pitch via co-pyrolysis, and their pyrolytic char as a promising precursor of activated carbon. © The Author(s) 2014.

Problematic Gaming Behavior Among Finnish Junior High School Students: Relation to Socio-Demographics and Gaming Behavior Characteristics.

PubMed

Männikkö, Niko; Ruotsalainen, Heidi; Demetrovics, Zsolt; Lopez-Fernandez, Olatz; Myllymäki, Laura; Miettunen, Jouko; Kääriäinen, Maria

2017-09-14

Multiplatform digital media use and gaming have been increased in recent years. The aim of this study was to examine associations between sociodemographics and digital gaming behavior characteristics (i.e., gaming time, medium, and genres) with problematic gaming behavior in adolescents. A convenience sample of Finnish junior high school students (n = 560; mean age 14 years, ranging from 12 to 16 years) participated in the cross-sectional survey, of which, 83% (n = 465) reported having played digital games regularly. Sociodemographic data, different forms of digital media use, gaming behavior characteristics and problematic gaming behavior was assessed. Study participants spent on average one hour per day playing digital games; casual games (23.9%), shooting games (19.8%), and sport games (12.9%), were the most popular games among participants. By using regression analysis, a blended family structure and gaming time related positively to problematic gaming behavior. Preferences for game genres such as solo, Massively Multiplayer Online Role-Playing and strategy-management games were also positively associated with problematic use of digital games. These findings provide knowledge that can be utilized in the prevention of the possible negative consequences of digital gaming.

Application of queuing theory to patient satisfaction at a tertiary hospital in Nigeria

PubMed Central

Ameh, Nkeiruka; Sabo, B.; Oyefabi, M. O.

2013-01-01

Background: Queuing theory is the mathematical approach to the analysis of waiting lines in any setting where arrival rate of subjects is faster than the system can handle. It is applicable to healthcare settings where the systems have excess capacity to accommodate random variations. Materials and Methods: A cross-sectional descriptive survey was done. Questionnaires were administered to patients who attended the general outpatient department. Observations were also made on the queuing model and the service discipline at the clinic. Questions were meant to obtain demographic characteristics and the time spent on the queue by patients before being seen by a doctor, time spent with the doctor, their views about the time spent on the queue and useful suggestions on how to reduce the time spent on the queue. A total of 210 patients were surveyed. Results: Majority of the patients (164, 78.1%) spent 2 h or less on the queue before being seen by a doctor and less than 1 h to see the doctor. Majority of the patients (144, 68.5%) were satisfied with the time they spent on the queue before being seen by a doctor. Useful suggestions proffered by the patients to decrease the time spent on the queue before seeing a doctor at the clinic included: that more doctors be employed (46, 21.9%), that doctors should come to work on time (25, 11.9%), that first-come-first served be observed strictly (32, 15.2%) and others suggested that the records staff should desist from collecting bribes from patients in order to place their cards before others. The queuing method employed at the clinic is the multiple single channel type and the service discipline is priority service. The patients who spent less time on the queue (<1 h) before seeing the doctor were more satisfied than those who spent more time (P < 0.05). Conclusion: The study has revealed that majority of the patients were satisfied with the practice at the general outpatient department. However, there is a need to employ measures to respond to the suggestions given by the patients who are the beneficiaries of the hospital services. PMID:23661902

Is time spent playing video games associated with mental health, cognitive and social skills in young children?

PubMed Central

Kovess-Masfety, Viviane; Keyes, Katherine; Hamilton, Ava; Hanson, Gregory; Bitfoi, Adina; Golitz, Dietmar; Koç, Ceren; Kuijpers, Rowella; Lesinskiene, Sigita; Mihova, Zlatka; Otten, Roy; Fermanian, Christophe; Pez, Ondine

2016-01-01

Background Video games are one of the favourite leisure activities of children; the influence on child health is usually perceived to be negative. The present study assessed the association between the amount of time spent playing video games and children mental health as well as cognitive and social skills. Methods Data were drawn from the School Children Mental Health Europe project conducted in six European Union countries (youth ages 6–11, n = 3195). Child mental health was assessed by parents and teachers using the Strengths and Difficulties Questionnaire and by children themselves with the Dominic Interactive. Child video game usage was reported by the parents. Teachers evaluated academic functioning. Multivariable logistic regressions were used. Results 20 % of the children played video games more than 5 h per week. Factors associated with time spent playing video games included being a boy, being older, and belonging to a medium size family. Having a less educated, single, inactive, or psychologically distressed mother decreased time spent playing video games. Children living in Western European countries were significantly less likely to have high video game usage (9.66 vs 20.49 %) though this was not homogenous. Once adjusted for child age and gender, number of children, mothers age, marital status, education, employment status, psychological distress, and region, high usage was associated with 1.75 times the odds of high intellectual functioning (95 % CI 1.31–2.33), and 1.88 times the odds of high overall school competence (95 % CI 1.44–2.47). Once controlled for high usage predictors, there were no significant associations with any child self-reported or mother- or teacher-reported mental health problems. High usage was associated with decreases in peer relationship problems [OR 0.41 (0.2–0.86) and in prosocial deficits (0.23 (0.07, 0.81)]. Conclusions Playing video games may have positive effects on young children. Understanding the mechanisms through which video game use may stimulate children should be further investigated. PMID:26846228

Quantifying faculty teaching time in a department of obstetrics and gynecology.

PubMed

Emmons, S

1998-10-01

The goal of this project was to develop a reproducible system that measures quantity and quality of teaching in unduplicated hours, such that comparisons of teaching activities could be drawn within and across departments. Such a system could be used for allocating teaching monies and for assessing teaching as part of the promotion and tenure process. Various teaching activities, including time spent in clinic, rounds, and doing procedures, were enumerated. The faculty were surveyed about their opinions on the proportion of clinical time spent in teaching. The literature also was reviewed. Based on analysis of the faculty survey and the literature, a series of calculations were developed to divide clinical time among resident teaching, medical student teaching, and patient care. The only input needed was total time spent in the various clinical activities, time spent in didactic activities, and the resident procedure database. This article describes a simple and fair database system to calculate time spent teaching from activities such as clinic, ward rounds, labor and delivery, and surgery. The teaching portfolio database calculates teaching as a proportion of the faculty member's total activities. The end product is a report that provides a reproducible yearly summary of faculty teaching time per activity and per type of learner.

Retention in medication-assisted treatment programs in Ukraine-Identifying factors contributing to a continuing HIV epidemic.

PubMed

Dumchev, Kostyantyn; Dvoryak, Sergii; Chernova, Olena; Morozova, Olga; Altice, Frederick L

2017-10-01

Opioid agonist treatments (OAT) are widely-used, evidence-based strategies for treating opioid dependence and reducing HIV transmission. The positive benefits of OAT are strongly correlated with time spent in treatment, making retention a key indicator for program quality. This study assessed patient retention and associated factors in Ukraine, where OAT was first introduced in 2004. Data from clinical records of 2916 patients enrolled in OAT at thirteen sites from 2005 to 2012 were entered into an electronic monitoring system. Survival analysis methods were used to determine the probability of retention and its correlates. Twelve-month retention was 65.8%, improving from 27.7% in 2005, to 70.9% in 2011. In multivariable analyses, the correlates of retention were receiving medium and high doses of medication (compared to low doses, dropout aHR=0.57 for both medium and high doses), having not been tested for HIV and tuberculosis (compared to not being tested, dropout aHR=4.44 and 3.34, respectively), and among those who were tested-a negative TB test result (compared to receiving a positive test result, dropout aHR=0.67). Retention in Ukrainian OAT programs, especially in recent years, is comparable to other countries. The results confirm the importance of adequate OAT dosing (≥60mg of methadone, ≥8mg of buprenorphine). Higher dosing, however, will require interventions that address negative attitudes toward OAT by patients and providers. Interruption of OAT, in the case developing tuberculosis, should incorporate continuity of OAT for TB patients through integrated care delivery systems. Copyright © 2017 Elsevier B.V. All rights reserved.

Influence of flow velocity on motor behavior of sea cucumber Apostichopus japonicus.

PubMed

Pan, Yang; Zhang, Libin; Lin, Chenggang; Sun, Jiamin; Kan, Rentao; Yang, Hongsheng

2015-05-15

The influence of flow velocity on the motor behavior of the sea cucumber, Apostichopus japonicus was investigated in the laboratory. Cameras were used to record sea cucumber movements and behavior analysis software was used to measure the distance traveled, time spent, upstream or downstream of the start position and the speed of movements. In general, the mean velocity of A. japonicus was below 0.7mms(-1). The maximum velocity recorded for all the sea cucumbers tested was for a large individual (89.25±17.11g), at a flow rate of 4.6±0.5cms(-1). Medium sized (19.68±5.53g) and large individuals moved significantly faster than small individuals (2.65±1.24g) at the same flow rate. A. japonicus moved significantly faster when there was a moderate current (4.6±0.5cms(-1) and 14.7±0.3cms(-1)), compared with the fast flow rate (29.3±3.7cms(-1)) and when there was no flow (0cms(-1)). Sea cucumbers did not show positive rheotaxis in general, but did move in a downstream direction at faster current speeds. Large, medium and small sized individuals moved downstream at the fastest current speed tested, 29.3±3.7cms(-1). When there was no water flow, sea cucumbers tended to move in an irregular pattern. The movement patterns show that the sea cucumber, A. japonicus can move across the direction of flow, and can move both upstream and downstream along the direction of flow. Copyright © 2015. Published by Elsevier Inc.

Selection of the Strain Lactobacillus acidophilus ATCC 43121 and Its Application to Brewers' Spent Grain Conversion into Lactic Acid

PubMed Central

Liguori, Rossana; Soccol, Carlos Ricardo; Vandenberghe, Luciana Porto de Souza; Woiciechowski, Adenise Lorenci; Ionata, Elena; Marcolongo, Loredana; Faraco, Vincenza

2015-01-01

Six Lactobacillus strains were analyzed to select a bacterium for conversion of brewers' spent grain (BSG) into lactic acid. Among the investigated strains, L. acidophilus ATCC 43121 showed the highest yield of lactic acid production (16.1 g/L after 48 hours) when grown in a synthetic medium. It was then analyzed for its ability to grow on the hydrolysates obtained from BSG after acid-alkaline (AAT) or aqueous ammonia soaking (AAS) pretreatment. The lactic acid production by L. acidophilus ATCC 43121 through fermentation of the hydrolysate from AAS treated BSG was 96% higher than that from the AAT treated one, although similar yields of lactic acid per consumed glucose were achieved due to a higher (46%) glucose consumption by L. acidophilus ATCC 43121 in the AAS BSG hydrolysate. It is worth noting that adding yeast extract to the BSG hydrolysates increased both the yield of lactic acid per substrate consumed and the volumetric productivity. The best results were obtained by fermentation of AAS BSG hydrolysate supplemented by yeast extract, in which the strain produced 22.16 g/L of lactic acid (yield of 0.61 g/g), 27% higher than the value (17.49 g/L) obtained in the absence of a nitrogen source. PMID:26640784

Interim report on nuclear waste depository thermal analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Altenbach, T.J.

1978-07-25

A thermal analysis of a deep geologic depository for spent nuclear fuel is being conducted. The TRUMP finite difference heat transfer code is used to analyze a 3-dimensional model of the depository. The model uses a unit cell consisting of one spent fuel canister buried in salt beneath a ventilated room in the depository. A base case was studied along with several parametric variations. It is concluded that this method is appropriate for analyzing the thermal response of the system, and that the most important parameter in determining the maximum temperatures is the canister heat generation rate. The effects ofmore » room ventilation and different depository media are secondary.« less

Measurement and Analysis Plan for Investigation of Spent-Fuel Assay Using Lead Slowing-Down Spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Leon E.; Haas, Derek A.; Gavron, Victor A.

2009-09-25

Under funding from the Department of Energy Office of Nuclear Energy’s Materials, Protection, Accounting, and Control for Transmutation (MPACT) program (formerly the Advanced Fuel Cycle Initiative Safeguards Campaign), Pacific Northwest National Laboratory (PNNL) and Los Alamos National Laboratory (LANL) are collaborating to study the viability of lead slowing-down spectroscopy (LSDS) for spent-fuel assay. Based on the results of previous simulation studies conducted by PNNL and LANL to estimate potential LSDS performance, a more comprehensive study of LSDS viability has been defined. That study includes benchmarking measurements, development and testing of key enabling instrumentation, and continued study of time-spectra analysis methods.more » This report satisfies the requirements for a PNNL/LANL deliverable that describes the objectives, plans and contributing organizations for a comprehensive three-year study of LSDS for spent-fuel assay. This deliverable was generated largely during the LSDS workshop held on August 25-26, 2009 at Rensselaer Polytechnic Institute (RPI). The workshop itself was a prominent milestone in the FY09 MPACT project and is also described within this report.« less

Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

CROWE, R.D.; PIEPHO, M.G.

2000-03-23

This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

Reactivity loss validation of high burn-up PWR fuels with pile-oscillation experiments in MINERVE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leconte, P.; Vaglio-Gaudard, C.; Eschbach, R.

2012-07-01

The ALIX experimental program relies on the experimental validation of the spent fuel inventory, by chemical analysis of samples irradiated in a PWR between 5 and 7 cycles, and also on the experimental validation of the spent fuel reactivity loss with bum-up, obtained by pile-oscillation measurements in the MINERVE reactor. These latter experiments provide an overall validation of both the fuel inventory and of the nuclear data responsible for the reactivity loss. This program offers also unique experimental data for fuels with a burn-up reaching 85 GWd/t, as spent fuels in French PWRs never exceeds 70 GWd/t up to now.more » The analysis of these experiments is done in two steps with the APOLLO2/SHEM-MOC/CEA2005v4 package. In the first one, the fuel inventory of each sample is obtained by assembly calculations. The calculation route consists in the self-shielding of cross sections on the 281 energy group SHEM mesh, followed by the flux calculation by the Method Of Characteristics in a 2D-exact heterogeneous geometry of the assembly, and finally a depletion calculation by an iterative resolution of the Bateman equations. In the second step, the fuel inventory is used in the analysis of pile-oscillation experiments in which the reactivity of the ALIX spent fuel samples is compared to the reactivity of fresh fuel samples. The comparison between Experiment and Calculation shows satisfactory results with the JEFF3.1.1 library which predicts the reactivity loss within 2% for burn-up of {approx}75 GWd/t and within 4% for burn-up of {approx}85 GWd/t. (authors)« less

Match-play activity profile in elite women's rugby union players.

PubMed

Suarez-Arrones, Luis; Portillo, Javier; Pareja-Blanco, Fernando; Sáez de Villareal, Eduardo; Sánchez-Medina, Luis; Munguía-Izquierdo, Diego

2014-02-01

The aim of this study was to provide an objective description of the locomotive activities and exercise intensity undergone during the course of an international-level match of female rugby union. Eight players were analyzed using global positioning system tracking technology. The total distance covered by the players during the whole match was 5,820 ± 512 m. The backs covered significantly more distance than the forwards (6,356 ± 144 vs. 5,498 ± 412 m, respectively). Over this distance, 42.7% (2,487 ± 391 m) was spent standing or walking, 35% jogging (2,037 ± 315 m), 9.7% running at low intensity (566 ± 115 m), 9.5% at medium intensity (553 ± 190 m), 1.8% at high intensity (105 ± 74 m), and 1.2% sprinting (73 ± 107 m). There were significant differences in the distance covered by forwards and backs in certain speed zones. Analysis of the relative distance traveled over successive 10-minute period of match play revealed that the greatest distances were covered during the first (725 ± 53 m) and the last (702 ± 79 m) 10-minute period of the match. The average number of sprints, the average maximum distance of sprinting, the average minimum distance of sprinting, and the average sprint distance during the game were 4.7 ± 3.9 sprints, 20.6 ± 10.5 m, 5.8 ± 0.9 -m, and 12.0 ± 3.8 m, respectively. There were substantial differences between forwards and backs. Backs covered greater total distance, distance in certain speed zones, and sprinting performance. The players spent 46.9 ± 28.9% of match time between 91 and 100% of maximum heart rate and experienced a large number of impacts (accelerometer data and expressed as g forces) during the game. These findings offer important information to design better training strategies and physical fitness testing adapted to the specific demands of female rugby union.

Internal fracture heterogeneity in discrete fracture network modelling: Effect of correlation length and textures with connected and disconnected permeability field

NASA Astrophysics Data System (ADS)

Frampton, A.; Hyman, J.; Zou, L.

2017-12-01

Analysing flow and transport in sparsely fractured media is important for understanding how crystalline bedrock environments function as barriers to transport of contaminants, with important applications towards subsurface repositories for storage of spent nuclear fuel. Crystalline bedrocks are particularly favourable due to their geological stability, low advective flow and strong hydrogeochemical retention properties, which can delay transport of radionuclides, allowing decay to limit release to the biosphere. There are however many challenges involved in quantifying and modelling subsurface flow and transport in fractured media, largely due to geological complexity and heterogeneity, where the interplay between advective and dispersive flow strongly impacts both inert and reactive transport. A key to modelling transport in a Lagrangian framework involves quantifying pathway travel times and the hydrodynamic control of retention, and both these quantities strongly depend on heterogeneity of the fracture network at different scales. In this contribution, we present recent analysis of flow and transport considering fracture networks with single-fracture heterogeneity described by different multivariate normal distributions. A coherent triad of fields with identical correlation length and variance are created but which greatly differ in structure, corresponding to textures with well-connected low, medium and high permeability structures. Through numerical modelling of multiple scales in a stochastic setting we quantify the relative impact of texture type and correlation length against network topological measures, and identify key thresholds for cases where flow dispersion is controlled by single-fracture heterogeneity versus network-scale heterogeneity. This is achieved by using a recently developed novel numerical discrete fracture network model. Furthermore, we highlight enhanced flow channelling for cases where correlation structure continues across intersections in a network, and discuss application to realistic fracture networks using field data of sparsely fractured crystalline rock from the Swedish candidate repository site for spent nuclear fuel.

Removal of basic dyes from aqueous solutions with a treated spent bleaching earth.

PubMed

Mana, Mohamed; Ouali, Mohand-Said; de Menorval, L C

2007-03-01

A spent bleaching earth from an edible oil refinery was treated by impregnation with a normal sodium hydroxide solution followed by mild thermal treatment (100 degrees C). The obtained material (TSBE) was washed, dried, and characterized by X-ray diffraction, FTIR, SEM, BET, and thermal analysis. The clay structure was not apparently affected by the treatment and the impregnated organic matter was quantitatively removed. We have investigated the comparative sorption of safranine and methylene blue on this material, the spent bleaching earth (SBE), and the virgin bleaching earth (VBE). The kinetic results fit the pseudo-second-order kinetic model and the Weber and Morris intraparticle diffusion model. The pH had no effect on the sorption efficiency. The sorption isotherms followed the Langmuir model for various sorbent concentrations with good values of the determination coefficient. A linear relationship was found between the calculated maximum removal capacity and the solid/solution ratio. A comparison between the results obtained with this material and those of the literature highlighted the low cost and the good removal capacity of treated spent bleaching earth.

Is acculturation always adverse to Korean immigrant health in the United States?

PubMed

Ra, Chaelin Karen; Cho, Youngtae; Hummer, Robert A

2013-06-01

This study examined the association between individuals' proportion of life spent in the United States and the health status and health behaviors among Korean immigrants aged 25 and above. The analysis is stratified by level of education to test whether a higher proportion of time spent in the United States is associated with poorer health among both less educated and highly educated Korean immigrants. California health interview survey data from 2005 to 2007 were used to estimate logistic regression models of health and health behaviour among Korean immigrants, stratified by educational attainment. The health and health behaviour of less educated Korean immigrants tended to be worse among those with a higher proportion of residence in the United States. However, more highly educated Korean immigrants tended to exhibit lower odds of being unhealthy and lower odds of poor health behavior with a higher proportion of life spent in the United States. Acculturation is not always associated with poorer immigrant health outcomes. A higher proportion of life spent in the United States tends to be associated with more favorable health and health behavior among highly educated Korean immigrants.

Arsenic Re-Mobilization in Water Treatment Adsorbents Under Reducing Conditions: Part II, XAS and Modeling Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu,S.; Jing, C.; Meng, X.

2008-01-01

The mechanism of arsenic re-mobilization in spent adsorbents under reducing conditions was studied using X-ray absorption spectroscopy and surface complexation model calculations. X-ray absorption near edge structure (XANES) spectroscopy demonstrated that As(V) was partially reduced to As(III) in spent granular ferric hydroxide (GFH), titanium dioxide (TiO2), activated alumina (AA) and modified activated alumina (MAA) adsorbents after 2 years of anaerobic incubation. As(V) was completely reduced to As(III) in spent granular ferric oxide (GFO) under 2-year incubation. The extended X-ray absorption fine structure (EXAFS) spectroscopy analysis showed that As(III) formed bidentate binuclear surface complexes on GFO as evidenced by an averagemore » As(III)-O bond distance of 1.78 Angstroms and As(III)-Fe distance of 3.34 Angstroms . The release of As from the spent GFO and TiO2 was simulated using the charge distribution multi-site complexation (CD-MUSIC) model. The observed redox ranges for As release and sulfate mobility were described by model calculations.« less

Production of poly-3-(hydroxybutyrate-co-hydroxyvalerate) by Haloferax mediterranei using rice-based ethanol stillage with simultaneous recovery and re-use of medium salts.

PubMed

Bhattacharyya, Anirban; Saha, Jayeeta; Haldar, Saubhik; Bhowmic, Asit; Mukhopadhyay, Ujjal Kumar; Mukherjee, Joydeep

2014-03-01

Haloferax mediterranei holds promise for competitive industrial-scale production of polyhydroxyalkanoate (PHA) because cheap carbon sources can be used thus lowering production costs. Although high salt concentration in production medium permits a non-sterile, low-cost process, salt disposal after process completion is a problem as current environmental standards do not allow total dissolved solids (TDS) above 2000 mg/l in discharge water. As the first objective of this work, the waste product of rice-based ethanol industry, stillage, was used for the production of PHA by H. mediterranei in shake flasks. Utilization of raw stillage led to 71 ± 2% (of dry cell weight) PHA accumulation and 16.42 ± 0.02 g/l PHA production. The product yield coefficient was 0.35 while 0.17 g/l h volumetric productivity was attained. Simultaneous reduction of BOD5 and COD values of stillage by 83% was accomplished. The PHA was isolated by osmotic lysis of cells, purification by sodium dodecyl sulfate and organic solvents. The biopolymer was identified as poly-3-(hydroxybutyrate-co-15.4 mol%-hydroxyvalerate) (PHBV). This first report on utilization of rice-based ethanol stillage for PHBV production by H. mediterranei is currently the most cost effective. As the second objective, directional properties of decanoic acid together with temperature dependence of water solubility in decanoic acid were applied for two-stage desalination of the spent stillage medium. We report for the first time, recovery and re-use of 96% of the medium salts for PHA production thus removing the major bottleneck in the potential application of H. mediterranei for industrial production of PHBV. Final discharge water had TDS content of 670 mg/l.

Expanding potential of radiofrequency nurse call systems to measure nursing time in patient rooms.

PubMed

Fahey, Linda; Dunn Lopez, Karen; Storfjell, Judith; Keenan, Gail

2013-05-01

The objective of this study was to determine the utility and feasibility of using data from a nurse call system equipped with radiofrequency identification data (RFID) to measure nursing time spent in patient rooms. Increasing the amount of time nurses spend with hospitalized patients has become a focus after several studies demonstrating that nurses spend most of their time in nondirect care activities rather than delivering patient care. Measurement of nursing time spent in direct care often involves labor-intensive time and motion studies, making frequent or continuous monitoring impractical. Mixed methods were used for this descriptive study. We used 30 days of data from an RFID nurse call system collected on 1 unit in a community hospital to examine nurses time spent in patient rooms. Descriptive statistics were applied to calculate this percentage by role and shift. Data technologists were surveyed to assess how practical the access of data would be in a hospital setting for use in monitoring nursing time spent in patient rooms. The system captured 7393 staff hours. Of that time, 7% did not reflect actual patient care time, so these were eliminated from further analysis. The remaining 6880 hours represented 91% of expected worked time. RNs and nursing assistants spent 33% to 36% of their time in patient rooms, presumably providing direct care. Radiofrequency identification data technology was found to provide feasible and accurate means for capturing and evaluating nursing time spent in patient rooms. Depending on the outcomes per unit, leaders should work with staff to maximize patient care time.

Sedentary behavior, physical activity, and concentrations of insulin among US adults.

PubMed

Ford, Earl S; Li, Chaoyang; Zhao, Guixiang; Pearson, William S; Tsai, James; Churilla, James R

2010-09-01

Time spent watching television has been linked to obesity, metabolic syndrome, and diabetes, all conditions characterized to some degree by hyperinsulinemia and insulin resistance. However, limited evidence relates screen time (watching television or using a computer) directly to concentrations of insulin. We examined the cross-sectional associations between time spent watching television or using a computer, physical activity, and serum concentrations of insulin using data from 2800 participants aged at least 20 years of the 2003-2006 National Health and Nutrition Examination Survey. The amount of time spent watching television and using a computer as well as physical activity was self-reported. The unadjusted geometric mean concentration of insulin increased from 6.2 microU/mL among participants who did not watch television to 10.0 microU/mL among those who watched television for 5 or more hours per day (P = .001). After adjustment for age, sex, race or ethnicity, educational status, concentration of cotinine, alcohol intake, physical activity, waist circumference, and body mass index using multiple linear regression analysis, the log-transformed concentrations of insulin were significantly and positively associated with time spent watching television (P = < .001). Reported time spent using a computer was significantly associated with log-transformed concentrations of insulin before but not after accounting for waist circumference and body mass index. Leisure-time physical activity but not transportation or household physical activity was significantly and inversely associated with log-transformed concentrations of insulin. Sedentary behavior, particularly the amount of time spent watching television, may be an important modifiable determinant of concentrations of insulin. Published by Elsevier Inc.

Predictors of performance of students in biochemistry in a doctor of chiropractic curriculum.

PubMed

Shaw, Kathy; Rabatsky, Ali; Dishman, Veronica; Meseke, Christopher

2014-01-01

Objective : This study investigated the effect of completion of course prerequisites, undergraduate grade point average (GPA), undergraduate degree, and study habits on the performance of students in the biochemistry course at Palmer College of Chiropractic Florida. Methods : Students self-reported information regarding academic preparation at the beginning of the semester using a questionnaire. Final exam grade and final course grade were noted and used as measures of performance. Multivariate analysis of variance was used to determine if number of prerequisites completed, undergraduate GPA, undergraduate degree, hours spent studying in undergraduate study, and hours spent studying in the first quarter of the chiropractic program were associated significantly with the biochemistry final exam grade or the final grade for the biochemistry course. Results : The number of prerequisites completed, undergraduate degree, hours spent studying in undergraduate study, and hours spent studying in the first quarter of the chiropractic program did not significantly affect the biochemistry final exam grade or the final grade for the biochemistry course, but undergraduate GPA did. Subsequent univariate analysis and Tukey's post hoc comparisons revealed that students with an undergraduate GPA in the 3.5 to 3.99 range earned significantly higher final course grades than students with an undergraduate GPA in the 2.5 to 2.99 range. Conclusion : No single variable was determined to be a factor that determines student success in biochemistry. The interrelationship between the factors examined warrants further investigation to understand fully how to predict the success of a student in the biochemistry course.

Development of sustainable dye adsorption system using nutraceutical industrial fennel seed spent-studies using Congo red dye.

PubMed

Taqui, Syed Noeman; Yahya, Rosiyah; Hassan, Aziz; Nayak, Nayan; Syed, Akheel Ahmed

2017-07-03

Fennel seed spent (FSS)-an inexpensive nutraceutical industrial spent has been used as an efficient biosorbent for the removal of Congo red (CR) from aqueous media. Results show that the conditions for maximum adsorption would be pH 2-4 and 30°C were ideal for maximum adsorption. Based on regression fitting of the data, it was determined that the Sips isotherm (R 2 = 0.994, χ 2 = 0.5) adequately described the mechanism of adsorption, suggesting that the adsorption occurs homogeneously with favorable interaction between layers with favorable interaction between layers. Thermodynamic analysis showed that the adsorption is favorable (negative values for ΔG°) and endothermic (ΔH° = 12-20 kJ mol -1 ) for initial dye concentrations of 25, 50, and 100 ppm. The low ΔH° value indicates that the adsorption is a physical process involving weak chemical interactions like hydrogen bonds and van der Waals interactions. The kinetics revealed that the adsorption process showed pseudo-second-order tendencies with the equal influence of intraparticle as well as film diffusion. The scanning electron microscopy images of FSS show a highly fibrous matrix with a hierarchical porous structure. The Fourier transform infrared spectroscopy analysis of the spent confirmed the presence of cellulosic and lignocellulosic matter, giving it both hydrophilic and hydrophobic properties. The investigations indicate that FSS is a cost-effective and efficient biosorbent for the remediation of toxic CR dye.

FY13 Summary Report on the Augmentation of the Spent Fuel Composition Dataset for Nuclear Forensics: SFCOMPO/NF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brady Raap, Michaele C.; Lyons, Jennifer A.; Collins, Brian A.

This report documents the FY13 efforts to enhance a dataset of spent nuclear fuel isotopic composition data for use in developing intrinsic signatures for nuclear forensics. A review and collection of data from the open literature was performed in FY10. In FY11, the Spent Fuel COMPOsition (SFCOMPO) excel-based dataset for nuclear forensics (NF), SFCOMPO/NF was established and measured data for graphite production reactors, Boiling Water Reactors (BWRs) and Pressurized Water Reactors (PWRs) were added to the dataset and expanded to include a consistent set of data simulated by calculations. A test was performed to determine whether the SFCOMPO/NF dataset willmore » be useful for the analysis and identification of reactor types from isotopic ratios observed in interdicted samples.« less

10 CFR 72.248 - Safety analysis report updating.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Safety analysis report updating. 72.248 Section 72.248 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF... Approval of Spent Fuel Storage Casks § 72.248 Safety analysis report updating. (a) Each certificate holder...

Smoking and poverty in Brazil: an analysis of the profile of the smoking population based on the 2008-09 Brazilian government Family Budget Survey.

PubMed

Bazotti, Angelita; Finokiet, Manuela; Conti, Irio Luiz; França, Marco Tulio Aniceto; Waquil, Paulo Dabdab

2016-01-01

This paper aims to characterize the Brazilian population who spent money with tobacco products. POF dataset was used from IBGE of the years 2008 and 2009. The same definition that IBGE usually use for tobacco consumer was applied, which is someone has spent money with any kind of tobacco products and its derivatives. It was used individual aspects taking into account such as gender, schooling, age (over 14 years old), income lines, regions and ethnics to characterize these populations. Descriptive statistics were employed to estimate the results and the complex sample design of the survey was considered. According to our results, on average, 10% of the Brazilian population have spent money with tobacco products. Besides, these people are older, earn low salaries and have less schooling than someone who does not consume tobacco. Moreover, for this population 1.5% of the family budget is spent on tobacco products. Last but not least, the most of tobacco consumers are men. In general, money which is spent on tobacco products can cause impressive effects on domestic budget because this value could supply other important necessities to the family. Although there are many monitoring and prevention strategies to avoid tobacco consume, deep knowledge about this population that actually consume these products can increase the efficacy of more specific policies.

77 FR 24541 - Virginia Electric and Power Company, North Anna Power Station Units 1 and 2, Independent Spent...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-24

... submitted TN Calculation No. 10494-174, which performed a bounding thermal analysis using ANSYS finite element software to evaluate the misloading events. The ANSYS analysis consists of a half-symmetric, three...

RISKIND : an enhanced computer code for National Environmental Policy Act transportation consequence analysis

DOT National Transportation Integrated Search

1996-01-01

The RISKIND computer program was developed for the analysis of radiological consequences and health risks to individuals and the collective population from exposures associated with the transportation of spent nuclear fuel (SNF) or other radioactive ...

Preliminary design review report - sludge offload system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mcwethy, L.M. Westinghouse Hanford

1996-06-05

This report documents the conceptual design review of the sludge offload system for the Spent Nuclear Fuel Project. The design description, drawings, available analysis, and safety analysis were reviewed by a peer group. The design review comments and resolutions are documented.

Advances in Geologic Disposal System Modeling and Shale Reference Cases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mariner, Paul E.; Stein, Emily R.; Frederick, Jennifer M.

The Spent Fuel and Waste Science and Technology (SFWST) Campaign of the U.S. Department of Energy (DOE) Office of Nuclear Energy (NE), Office of Fuel Cycle Technology (OFCT) is conducting research and development (R&D) on geologic disposal of spent nuclear fuel (SNF) and high level nuclear waste (HLW). Two high priorities for SFWST disposal R&D are design concept development and disposal system modeling (DOE 2011, Table 6). These priorities are directly addressed in the SFWST Generic Disposal Systems Analysis (GDSA) work package, which is charged with developing a disposal system modeling and analysis capability for evaluating disposal system performance formore » nuclear waste in geologic media (e.g., salt, granite, shale, and deep borehole disposal).« less

Energy analysis of cool, medium, and dark roofs on residential buildings in the U.S

NASA Astrophysics Data System (ADS)

Dunbar, Michael A.

This study reports an energy analysis of cool, medium, and dark roofs on residential buildings in the U.S. Three analyses were undertaken in this study: energy consumption, economic analysis, and an environmental analysis. The energy consumption reports the electricity and natural gas consumption of the simulations. The economic analysis uses tools such as simple payback period (SPP) and net present value (NPV) to determine the profitability of the cool roof and the medium roof. The variable change for each simulation model was the roof color. The default color was a dark roof and the results were focused on the changes produced by the cool roof and the medium roof. The environmental analysis uses CO2 emissions to assess the environmental impact of the cool roof and the medium roof. The analysis uses the U.S. Department of Energy (DOE) EnergyPlus software to produce simulations of a typical, two-story residential home in the U.S. The building details of the typical, two-story U.S. residential home and the International Energy Conservation Code (IECC) building code standards used are discussed in this study. This study indicates that, when material and labor costs are. assessed, the cool roof and the medium roof do not yield a SPP less than 10 years. Furthermore, the NPV results assess that neither the cool roof nor the medium roof are a profitable investment in any climate zone in the U.S. The environmental analysis demonstrates that both the cool roof and the medium roof have a positive impact in warmer climates by reducing the CO2 emissions as much as 264 kg and 129 kg, respectively.

Noninvasive chromosome screening of human embryos by genome sequencing of embryo culture medium for in vitro fertilization.

PubMed

Xu, Juanjuan; Fang, Rui; Chen, Li; Chen, Daozhen; Xiao, Jian-Ping; Yang, Weimin; Wang, Honghua; Song, Xiaoqing; Ma, Ting; Bo, Shiping; Shi, Chong; Ren, Jun; Huang, Lei; Cai, Li-Yi; Yao, Bing; Xie, X Sunney; Lu, Sijia

2016-10-18

Preimplantation genetic screening (PGS) is widely used to select in vitro-fertilized embryos free of chromosomal abnormalities and to improve the clinical outcome of in vitro fertilization (IVF). A disadvantage of PGS is that it requires biopsy of the preimplantation human embryo, which can limit the clinical applicability of PGS due to the invasiveness and complexity of the process. Here, we present and validate a noninvasive chromosome screening (NICS) method based on sequencing the genomic DNA secreted into the culture medium from the human blastocyst. By using multiple annealing and looping-based amplification cycles (MALBAC) for whole-genome amplification (WGA), we performed next-generation sequencing (NGS) on the spent culture medium used to culture human blastocysts (n = 42) and obtained the ploidy information of all 24 chromosomes. We validated these results by comparing each with their corresponding whole donated embryo and obtained a high correlation for identification of chromosomal abnormalities (sensitivity, 0.882, and specificity, 0.840). With this validated NICS method, we performed chromosome screening on IVF embryos from seven couples with balanced translocation, azoospermia, or recurrent pregnancy loss. Six of them achieved successful clinical pregnancies, and five have already achieved healthy live births thus far. The NICS method avoids the need for embryo biopsy and therefore substantially increases the safety of its use. The method has the potential of much wider chromosome screening applicability in clinical IVF, due to its high accuracy and noninvasiveness.

Evaluation of entomopathogenic nematodes and the supernatants of the in vitro culture medium of their mutualistic bacteria for the control of the root-knot nematodes Meloidogyne incognita and M. arenaria.

PubMed

Kepenekci, Ilker; Hazir, Selcuk; Lewis, Edwin E

2016-02-01

The suppressive effects of various formulations of four entomopathogenic nematode (EPN) species and the supernatants of their mutualistic bacteria on the root-knot nematodes (RKNs) Meloidogyne incognita and M. arenaria in tomato roots were evaluated. The EPNs Steinernema carpocapsae, S. feltiae, S. glaseri and Heterorhabditis bacteriophora were applied as either live infective juveniles (IJs) or infected insect cadavers. Spent medium from culturing the bacterial symbionts Xenorhabdus bovienii and Photorhabdus luminescens kayaii with the cells removed was also applied without their nematode partners. The aqueous suspensions of IJs, infected cadaver applications of EPNs and especially treatments of X. bovienii supernatant suppressed the negative impact of RKNs on tomatoes. Specific responses to treatment were reduced RKN egg masses, increased plant height and increased fresh and dry weights compared with the control where only RKNs were applied. Among the treatments tested, the plant-dipping method of X. bovienii into bacterial culture fluid may be the most practical and effective method for M. incognita and M. arenaria control. © 2015 Society of Chemical Industry.

Time Well Spent? Relating Television Use to Children’s Free-Time Activities

PubMed Central

Vandewater, Elizabeth A.; Bickham, David S.; Lee, June H.

2010-01-01

OBJECTIVES This study assessed the claim that children’s television use interferes with time spent in more developmentally appropriate activities. METHODS Data came from the first wave of the Child Development Supplement, a nationally representative sample of children aged 0 to 12 in 1997 (N = 1712). Twenty-four-hour time-use diaries from 1 randomly chosen weekday and 1 randomly chosen weekend day were used to assess children’s time spent watching television, time spent with parents, time spent with siblings, time spent reading (or being read to), time spent doing homework, time spent in creative play, and time spent in active play. Ordinary least squares multiple regression was used to assess the relationship between children’s television use and time spent pursuing other activities. RESULTS Results indicated that time spent watching television both with and without parents or siblings was negatively related to time spent with parents or siblings, respectively, in other activities. Television viewing also was negatively related to time spent doing homework for 7- to 12-year-olds and negatively related to creative play, especially among very young children (younger than 5 years). There was no relationship between time spent watching television and time spent reading (or being read to) or to time spent in active play. CONCLUSIONS The results of this study are among the first to provide empirical support for the assumptions made by the American Academy of Pediatrics in their screen time recommendations. Time spent viewing television both with and without parents and siblings present was strongly negatively related to time spent interacting with parents or siblings. Television viewing was associated with decreased homework time and decreased time in creative play. Conversely, there was no support for the widespread belief that television interferes with time spent reading or in active play. PMID:16452327

Systems for the Intermodal Routing of Spent Nuclear Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Steven K; Liu, Cheng

The safe and secure movement of spent nuclear fuel from shutdown and active reactor facilities to intermediate or long term storage sites may, in some instances, require the use of several modes of transportation to accomplish the move. To that end, a fully operable multi-modal routing system is being developed within Oak Ridge National Laboratory s (ORNL) WebTRAGIS (Transportation Routing Analysis Geographic Information System). This study aims to provide an overview of multi-modal routing, the existing state of the TRAGIS networks, the source data needs, and the requirements for developing structural relationships between various modes to create a suitable systemmore » for modeling the transport of spent nuclear fuel via a multimodal network. Modern transportation systems are comprised of interconnected, yet separate, modal networks. Efficient transportation networks rely upon the smooth transfer of cargoes at junction points that serve as connectors between modes. A key logistical impediment to the shipment of spent nuclear fuel is the absence of identified or designated transfer locations between transport modes. Understanding the potential network impacts on intermodal transportation of spent nuclear fuel is vital for planning transportation routes from origin to destination. By identifying key locations where modes intersect, routing decisions can be made to prioritize cost savings, optimize transport times and minimize potential risks to the population and environment. In order to facilitate such a process, ORNL began the development of a base intermodal network and associated routing code. The network was developed using previous intermodal networks and information from publicly available data sources to construct a database of potential intermodal transfer locations with likely capability to handle spent nuclear fuel casks. The coding development focused on modifying the existing WebTRAGIS routing code to accommodate intermodal transfers and the selection of prioritization constraints and modifiers to determine route selection. The limitations of the current model and future directions for development are discussed, including the current state of information on possible intermodal transfer locations for spent fuel.« less

Effects of and preference for pay for performance: an analogue analysis.

PubMed

Long, Robert D; Wilder, David A; Betz, Alison; Dutta, Ami

2012-01-01

We examined the effects of 2 payment systems on the rate of check processing and time spent on task by participants in a simulated work setting. Three participants experienced individual pay-for-performance (PFP) without base pay and pay-for-time (PFT) conditions. In the last phase, we asked participants to choose which system they preferred. For all participants, the PFP condition produced higher rates of check processing and more time spent on task than did the PFT condition, but choice of payment system varied both within and across participants.

Cartoon music in a candy store: a field experiment.

PubMed

Le Guellec, Hélène; Guéguen, Nicolas; Jacob, Céline; Pascual, Alexandre

2007-06-01

An experiment on consumers' behavior was carried out in a new field context. According to a random assignment, 60 customers from ages 12 to 14 years who entered a candy store were exposed to Top Forty music which was usually played in this store, music from cartoons (Captain Flame, Candy, Olive & Tom, etc.), or no music. Analysis showed that customers spent significantly more time in the store when cartoon music was played, but the two styles of music were not related to the amount of money spent.

Development of Novel Decontamination and Inerting Techniques for Explosive Contaminated Facilities, Laboratory Evaluation of Concepts. Phase II. Laboratory Evaluation of Novel Explosives Decontamination Concepts

DTIC Science & Technology

1985-03-01

gallons for Building 2. -... The system must be capable of wit standing caustic corrosion. • Either stainless steel or lined mild steel may be used. As...assumed that spent charcoal could be disposed in some safe manner arid would be re- placed as used. Additional costs were in luded for sampling and analysis...decontamination of all three explosives could be effected by further sequential treatment of the spent explosives decontami- nation solutions with acidic ferrous

Effect of a dual-purpose cask payload increment of spent fuel assemblies from VVER 1000 Bushehr Nuclear Power Plant on basket criticality.

PubMed

Rezaeian, M; Kamali, J

2017-01-01

Dual-purpose casks can be utilized for dry interim storage and transportation of the highly radioactive spent fuel assemblies (SFAs) of Bushehr Nuclear Power Plant (NPP). Criticality safety analysis was carried out using the MCNP code for the cask containing 12, 18, or 19 SFAs. The basket materials of borated stainless steel and Boral (Al-B 4 C) were investigated, and the minimum required receptacle pitch of the basket was determined. Copyright © 2016 Elsevier Ltd. All rights reserved.

Differences in Physicochemical and Nutritional Properties of Breast and Thigh Meat from Crossbred Chickens, Commercial Broilers, and Spent Hens

PubMed Central

Chen, Yulian; Qiao, Yan; Xiao, Yu; Chen, Haochun; Zhao, Liang; Huang, Ming; Zhou, Guanghong

2016-01-01

The objective of this study was to compare the physicochemical and nutritional properties of breast and thigh meat from commercial Chinese crossbred chickens (817 Crossbred chicken, 817C), imported commercial broilers (Arbor Acres broiler, AAB), and commercial spent hens (Hyline Brown, HLB). The crossbred chickens, commercial broilers and spent hens were slaughtered at their typical market ages of 45 d, 40 d, and 560 d, respectively. The results revealed that several different characteristic features for the three breeds. The meat of the 817C was darker than that of the other two genotypes. The 817C were also characterized by higher protein, lower intramuscular fat, and better texture attributes (cooking loss, pressing loss and Warner-Bratzler shear force [WBSF]) compared with AAB and HLB. The meat of the spent hens (i.e. HLB) was higher in WBSF and total collagen content than meat of the crossbred chickens and imported broilers. Furthermore, correlation analysis and principal component analysis revealed that there was a clear relationship among physicochemical properties of chicken meats. With regard to nutritional properties, it was found that 817C and HLB exhibited higher contents of essential amino acids and essential/non-essential amino acid ratios. In addition, 817C were noted to have highest content of microelements whereas AAB have highest content of potassium. Besides, 817C birds had particularly higher proportions of desirable fatty acids, essential fatty acids, polyunsaturated/saturated and (18:0+18:1)/16:0 ratios. The present study also revealed that there were significant differences on breast meat and thigh meat for the physicochemical and nutritional properties, regardless of chicken breeds. In conclusion, meat of crossbred chickens has some unique features and exhibited more advantages over commercial broilers and spent hens. Therefore, the current investigation would provide valuable information for the chicken meat product processing, and influence the consumption of different chicken meat. PMID:26954114

Differences in Physicochemical and Nutritional Properties of Breast and Thigh Meat from Crossbred Chickens, Commercial Broilers, and Spent Hens.

PubMed

Chen, Yulian; Qiao, Yan; Xiao, Yu; Chen, Haochun; Zhao, Liang; Huang, Ming; Zhou, Guanghong

2016-06-01

The objective of this study was to compare the physicochemical and nutritional properties of breast and thigh meat from commercial Chinese crossbred chickens (817 Crossbred chicken, 817C), imported commercial broilers (Arbor Acres broiler, AAB), and commercial spent hens (Hyline Brown, HLB). The crossbred chickens, commercial broilers and spent hens were slaughtered at their typical market ages of 45 d, 40 d, and 560 d, respectively. The results revealed that several different characteristic features for the three breeds. The meat of the 817C was darker than that of the other two genotypes. The 817C were also characterized by higher protein, lower intramuscular fat, and better texture attributes (cooking loss, pressing loss and Warner-Bratzler shear force [WBSF]) compared with AAB and HLB. The meat of the spent hens (i.e. HLB) was higher in WBSF and total collagen content than meat of the crossbred chickens and imported broilers. Furthermore, correlation analysis and principal component analysis revealed that there was a clear relationship among physicochemical properties of chicken meats. With regard to nutritional properties, it was found that 817C and HLB exhibited higher contents of essential amino acids and essential/non-essential amino acid ratios. In addition, 817C were noted to have highest content of microelements whereas AAB have highest content of potassium. Besides, 817C birds had particularly higher proportions of desirable fatty acids, essential fatty acids, polyunsaturated/saturated and (18:0+18:1)/16:0 ratios. The present study also revealed that there were significant differences on breast meat and thigh meat for the physicochemical and nutritional properties, regardless of chicken breeds. In conclusion, meat of crossbred chickens has some unique features and exhibited more advantages over commercial broilers and spent hens. Therefore, the current investigation would provide valuable information for the chicken meat product processing, and influence the consumption of different chicken meat.

Modifiable lifestyle factors affecting bone health using calcaneus quantitative ultrasound in adolescent girls.

PubMed

Robinson, M L; Winters-Stone, K; Gabel, K; Dolny, D

2007-08-01

One hundred and fourteen girls were measured for calcaneus QUS (stiffness index score), calcium intake, weight, and total hours spent in physical activity (moderate to high-impact activities and low to no-impact activities). Multiple regression analysis indicated that hours spent in moderate to high-impact activities, current calcium intake, and weight significantly predicted SI. To determine the influence of modifiable lifestyle factors on adolescent girls' bone health measured by calcaneus quantitative ultrasound (QUS). One hundred and fourteen girls, ages 14-18 (15.97 +/- .7), enrolled in high school physical education classes, were measured for calcaneus QUS (stiffness index score), height, weight, current calcium intake from 2-3 day food records, and estimated total hours spent in physical activity from kindergarten to present. Cumulative physical activity hours were separated into two classifications (according to their estimated strain from ground reaction force): moderate to high-impact activities and low to no-impact activities. Pearson correlations between stiffness index (SI) and age, height, weight, current calcium intake, and hours spent in moderate to high-impact versus low to no-impact activities indicated a positive relationships between SI and weight (r = .259, p = .005), current calcium intake (r = .286, p = .002), and hours spent in moderate to high-impact activities (r = .451, p < .001). Multiple regression between SI and the above independent variables indicated that collectively, hours spent in moderate to high-impact activities, current calcium intake, and weight (r (2) = .363, p = <.001) significantly predicted SI. Our data indicate that moderate to high-impact activities, current calcium intake, and weight positively influence bone properties of the calcaneus in adolescent girls.

The influence of generic substitution on the content of patient-pharmacist communication in Swedish community pharmacies.

PubMed

Olsson, Erika; Wallach-Kildemoes, Helle; Ahmed, Ban; Ingman, Pontus; Kaae, Susanne; Kälvemark Sporrong, Sofia

2017-08-01

The objective was to study the relationship between the length and content of patient-pharmacist communication in community pharmacies, and generic substitution. The study was conducted in six community pharmacies in Sweden. Non-participant observations with audio recordings and short structured interviews were conducted. Out of 32 pharmacists 29 agreed to participate (90.6%), as did 282 out of 407 patients (69.3%). Logistic regression analysis was applied to calculate odds ratio for occurrence of generic substitution. Linear regression (β-coefficients) was applied to test for differences in time spent on different categories. In encounters where generic substitution occurred more time (19.2 s) was spent on non-medical (for instance administrative or economical) issues (P = 0.01, 95% confidence interval 4.8-33.6). However, the total time of the encounter was not significantly longer. The amount of time spent on non-medical issues increased with age of patient (age 60+: β, 33 s, P < 0.001). The results indicate that more time was spent on medical issues with patients who have a higher education (high school: β, 10.8 s, P = 0.07, university: β, 10.2 s, P = 0.11) relative to those with only elementary school education. Occurrence of generic substitution was correlated with more time spent on communicating on non-medical, but not on medical, issues. No extra time was spent on medical information for the groups normally overrepresented among those with low health literacy. This study suggests that pharmacists need to further embrace their role in promoting rational use of medicines, not least when generic substitution occurs. © 2016 Royal Pharmaceutical Society.

Food preparation patterns in German family households. An econometric approach with time budget data.

PubMed

Möser, Anke

2010-08-01

In Germany, the rising importance of out-of-home consumption, increasing usage of convenience products and decreasing knowledge of younger individuals how to prepare traditional dishes can be seen as obvious indicators for shifting patterns in food preparation. In this paper, econometric analyses are used to shed more light on the factors which may influence the time spent on food preparation in two-parent family households with children. Two time budget surveys, carried out 1991/92 and 2001/02 through the German National Statistical Office, provide the necessary data. Time budget data analyses reveal that over the last ten years the time spent on food preparation in Germany has decreased. The results point out that time resources of a household, for example gainful employment of the parents, significantly affect the amount of time spent on food preparation. The analysis confirms further that there is a more equal allocation of time spent on cooking, baking or laying the table between women and men in the last ten years. Due to changing attitudes and conceivably adaption of economic conditions, differences in time devoted to food preparation seem to have vanished between Eastern and Western Germany. Greater time spent on eating out in Germany as well as decreasing time spent on food preparation at home reveal that the food provisioning of families is no longer a primarily private task of the households themselves but needs more public attention and institutional offers and help. Among other points, the possibility of addressing mothers' lack of time as well as growing "food illiteracy" of children and young adults are discussed. 2010 Elsevier Ltd. All rights reserved.

Trends in marriage and time spent single in sub-Saharan Africa: a comparative analysis of six population-based cohort studies and nine Demographic and Health Surveys.

PubMed

Marston, M; Slaymaker, E; Cremin, I; Floyd, S; McGrath, N; Kasamba, I; Lutalo, T; Nyirenda, M; Ndyanabo, A; Mupambireyi, Z; Zaba, B

2009-04-01

To describe trends in age at first sex (AFS), age at first marriage (AFM) and time spent single between events and to compare age-specific trends in marital status in six cohort studies. Cohort data from Uganda, Tanzania, South Africa, Zimbabwe and Malawi and Demographic and Health Survey (DHS) data from Uganda, Tanzania and Zimbabwe were analysed. Life table methods were used to calculate median AFS, AFM and time spent single. In each study, two surveys were chosen to compare marital status by age and identify changes over time. Median AFM was much higher in South Africa than in the other sites. Between the other populations there were considerable differences in median AFS and AFM (AFS 17-19 years for men and 16-19 years for women, AFM 21-24 years and 18-19 years, respectively, for the 1970-9 birth cohort). In all surveys, men reported a longer time spent single than women (median 4-7 years for men and 0-2 years for women). Median years spent single for women has increased, apart from in Manicaland. For men in Rakai it has decreased slightly over time but increased in Kisesa and Masaka. The DHS data showed similar trends to those in the cohort data. The age-specific proportion of married individuals has changed little over time. Median AFS, AFM and time spent single vary considerably among these populations. These three measures are underlying determinants of sexual risk and HIV infection, and they may partially explain the variation in HIV prevalence levels between these populations.

Trends in marriage and time spent single in sub-Saharan Africa: a comparative analysis of six population-based cohort studies and nine Demographic and Health Surveys

PubMed Central

Marston, M; Slaymaker, E; Cremin, I; Floyd, S; McGrath, N; Kasamba, I; Lutalo, T; Nyirenda, M; Ndyanabo, A; Mupambireyi, Z; Żaba, B

2009-01-01

Objectives: To describe trends in age at first sex (AFS), age at first marriage (AFM) and time spent single between events and to compare age-specific trends in marital status in six cohort studies. Methods: Cohort data from Uganda, Tanzania, South Africa, Zimbabwe and Malawi and Demographic and Health Survey (DHS) data from Uganda, Tanzania and Zimbabwe were analysed. Life table methods were used to calculate median AFS, AFM and time spent single. In each study, two surveys were chosen to compare marital status by age and identify changes over time. Results: Median AFM was much higher in South Africa than in the other sites. Between the other populations there were considerable differences in median AFS and AFM (AFS 17–19 years for men and 16–19 years for women, AFM 21–24 years and 18–19 years, respectively, for the 1970–9 birth cohort). In all surveys, men reported a longer time spent single than women (median 4–7 years for men and 0–2 years for women). Median years spent single for women has increased, apart from in Manicaland. For men in Rakai it has decreased slightly over time but increased in Kisesa and Masaka. The DHS data showed similar trends to those in the cohort data. The age-specific proportion of married individuals has changed little over time. Conclusions: Median AFS, AFM and time spent single vary considerably among these populations. These three measures are underlying determinants of sexual risk and HIV infection, and they may partially explain the variation in HIV prevalence levels between these populations. PMID:19307343

Development of a Korean reference HLW disposal system under the Korean representative geologic conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choi, Heui-Joo; Lee, Jong Youl; Choi, Jongwon

2007-07-01

The development of a Korean Reference disposal System for the spent fuels from PWR and CANDU reactors is outlined in this paper. Around 36,000 tU of spent fuels are being projected based on the lifetimes of 28 nuclear power reactors in Korea. Since the site for the geological disposal has not yet been decided, a hypothetical site with representative Korean geologic conditions is proposed for the conceptual design of the repository. The disposal rates of the spent fuels are determined according to the total operation time of 55 years. The canisters are optimized by considering natural Korean conditions, and themore » buffer is designed with domestic Ca-bentonite. The depth of the repository is determined to be 500 m below the ground's surface. The canister separation distances are determined through a thermal analysis. The main features of the repository are presented from the layout to the closure. A computer program has been developed to calculate and analyze the volume and the area of the disposal system to help in the cost analysis. The final output of the design is presented as a unit disposal cost, US $315 /kgU. (authors)« less

Financial and workflow analysis of radiology reporting processes in the planning phase of implementation of a speech recognition system

NASA Astrophysics Data System (ADS)

Whang, Tom; Ratib, Osman M.; Umamoto, Kathleen; Grant, Edward G.; McCoy, Michael J.

2002-05-01

The goal of this study is to determine the financial value and workflow improvements achievable by replacing traditional transcription services with a speech recognition system in a large, university hospital setting. Workflow metrics were measured at two hospitals, one of which exclusively uses a transcription service (UCLA Medical Center), and the other which exclusively uses speech recognition (West Los Angeles VA Hospital). Workflow metrics include time spent per report (the sum of time spent interpreting, dictating, reviewing, and editing), transcription turnaround, and total report turnaround. Compared to traditional transcription, speech recognition resulted in radiologists spending 13-32% more time per report, but it also resulted in reduction of report turnaround time by 22-62% and reduction of marginal cost per report by 94%. The model developed here helps justify the introduction of a speech recognition system by showing that the benefits of reduced operating costs and decreased turnaround time outweigh the cost of increased time spent per report. Whether the ultimate goal is to achieve a financial objective or to improve operational efficiency, it is important to conduct a thorough analysis of workflow before implementation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferrada, J.J.

This report compiles preliminary information that supports the premise that a repository is needed in Latin America and analyzes the nuclear situation (mainly in Argentina and Brazil) in terms of nuclear capabilities, inventories, and regional spent-fuel repositories. The report is based on several sources and summarizes (1) the nuclear capabilities in Latin America and establishes the framework for the need of a permanent repository, (2) the International Atomic Energy Agency (IAEA) approach for a regional spent-fuel repository and describes the support that international institutions are lending to this issue, (3) the current situation in Argentina in order to analyze themore » Argentinean willingness to find a location for a deep geological repository, and (4) the issues involved in selecting a location for the repository and identifies a potential location. This report then draws conclusions based on an analysis of this information. The focus of this report is mainly on spent fuel and does not elaborate on other radiological waste sources.« less

Physical Activity Pattern of Malaysian Preschoolers: Environment, Barriers, and Motivators for Active Play.

PubMed

Lee, Shoo Thien; Wong, Jyh Eiin; Ong, Wei Wen; Ismail, Mohd Noor; Deurenberg, Paul; Poh, Bee Koon

2016-07-01

Children's physical activity has been correlated with child characteristics and social or physical environment. This study aimed to compare preschoolers' physical activity among various sociodemographic characteristics and to determine barriers, motivators, and environmental factors for active play. A total of 835 preschoolers were included in this analysis. Time spent on active play, quiet play, and screen time was reported by parents. Boys spent significantly more time on active play and screen time than girls. Time spent on quiet play was highest in East Coast Peninsular Malaysia and lowest in Sarawak. Some 40% of children achieved active play recommendation while 27% exceeded daily screen time recommendation. Most parents reported that their child played actively in the house area; and that the main barrier and motivator to active play were safety and child's enjoyment, respectively. These findings demonstrate that sociodemographic characteristics and environment should be considered in designing physical activity intervention programs. © 2016 APJPH.

Objectively Measured Patterns of Activities of Different Intensity Categories and Steps Taken Among Working Adults in a Multi-ethnic Asian Population.

PubMed

Müller-Riemenschneider, Falk; Ng, Sheryl Hui Xian; Koh, David; Chu, Anne Hin Yee

2016-06-01

To objectively assess sedentary behavior (SB), light- and moderate-to-vigorous intensity physical activity (MVPA), and steps among Singaporean office-based workers across days of the week. A convenience sample of office-based employees of a public University was recruited. Time spent for SB, light-, and MVPA using different validated accelerometry counts per minute (CPM), and step count were determined. Depending on applied CPM for SB (less than 100, less than 150 and less than 200 CPM), 107 working adults spent between 69.2% and 76.4% of their daily wakeful time in SB. Time spent in SB and MVPA were higher on weekdays than weekends. The hourly analysis highlights patterns of greater SB during usual working hours on weekdays but not on weekends. SB at work contributes greatly toward total daily sitting time. Low PA levels and high SB levels were found on weekends.

Automated drug dispensing systems in the intensive care unit: a financial analysis.

PubMed

Chapuis, Claire; Bedouch, Pierrick; Detavernier, Maxime; Durand, Michel; Francony, Gilles; Lavagne, Pierre; Foroni, Luc; Albaladejo, Pierre; Allenet, Benoit; Payen, Jean-Francois

2015-09-09

To evaluate the economic impact of automated-drug dispensing systems (ADS) in surgical intensive care units (ICUs). A financial analysis was conducted in three adult ICUs of one university hospital, where ADS were implemented, one in each unit, to replace the traditional floor stock system. Costs were estimated before and after implementation of the ADS on the basis of floor stock inventories, expired drugs, and time spent by nurses and pharmacy technicians on medication-related work activities. A financial analysis was conducted that included operating cash flows, investment cash flows, global cash flow and net present value. After ADS implementation, nurses spent less time on medication-related activities with an average of 14.7 hours saved per day/33 beds. Pharmacy technicians spent more time on floor-stock activities with an average of 3.5 additional hours per day across the three ICUs. The cost of drug storage was reduced by €44,298 and the cost of expired drugs was reduced by €14,772 per year across the three ICUs. Five years after the initial investment, the global cash flow was €148,229 and the net present value of the project was positive by €510,404. The financial modeling of the ADS implementation in three ICUs showed a high return on investment for the hospital. Medication-related costs and nursing time dedicated to medications are reduced with ADS.

Outdoor time and dietary patterns in children around the world.

PubMed

Chaput, Jean-Philippe; Tremblay, Mark S; Katzmarzyk, Peter T; Fogelholm, Mikael; Mikkilä, Vera; Hu, Gang; Lambert, Estelle V; Maher, Carol; Maia, Jose; Olds, Timothy; Onywera, Vincent; Sarmiento, Olga L; Standage, Martyn; Tudor-Locke, Catrine; LeBlanc, Allana G

2018-04-19

Whether outdoor time is linked to dietary patterns of children has yet to be empirically tested. The objective of this study was to examine the association between outdoor time and dietary patterns of children from 12 countries around the world. This multinational, cross-sectional study included 6229 children 9-11 years of age. Children self-reported the time that they spent outside before school, after school and on weekends. A composite score was calculated to reflect overall daily outdoor time. Dietary patterns were assessed using a food frequency questionnaire, and two components were used for analysis: healthy and unhealthy dietary pattern scores. On average, children spent 2.5 h outside per day. After adjusting for age, sex, parental education, moderate-to-vigorous physical activity, screen time and body mass index z-score, greater time spent outdoors was associated with healthier dietary pattern scores. No association was found between outdoor time and unhealthy dietary pattern scores. Similar associations between outdoor time and dietary patterns were observed for boys and girls and across study sites. Greater time spent outside was associated with a healthier dietary pattern in this international sample of children. Future research should aim to elucidate the mechanisms behind this association.

DOE Office of Scientific and Technical Information (OSTI.GOV)

McIntosh, Kathryn G.; Reilly, Sean D.; Havrilla, George J.

Characterization of Pu is an essential aspect of safeguards operations at nuclear fuel reprocessing facilities. A novel analysis technique called hiRX (high resolution X-ray) has been developed for the direct measurement of Pu in spent nuclear fuel dissolver solutions. hiRX is based on monochromatic wavelength dispersive X-ray fluorescence (MWDXRF), which provides enhanced sensitivity and specificity compared with conventional XRF techniques. A breadboard setup of the hiRX instrument was calibrated using spiked surrogate spent fuel (SSF) standards prepared as dried residues. Samples of actual spent fuel were utilized to evaluate the performance of the hiRX. The direct detection of just 39more » ng of Pu is demonstrated. Initial quantitative results, with error of 4–27% and precision of 2% relative standard deviation (RSD), were obtained for spent fuel samples. The limit of detection for Pu (100 s) within an excitation spot of 200 μm diameter was 375 pg. This study demonstrates the potential for the hiRX technique to be utilized for the rapid, accurate, and precise determination of Pu. Moreover, the results highlight the analytical capability of hiRX for other applications requiring sensitive and selective nondestructive analyses.« less

Process controls for improving bioleaching performance of both Li and Co from spent lithium ion batteries at high pulp density and its thermodynamics and kinetics exploration.

PubMed

Niu, Zhirui; Zou, Yikan; Xin, Baoping; Chen, Shi; Liu, Changhao; Li, Yuping

2014-08-01

Release of Co and Li from spent lithium ion batteries (LIBs) by bioleaching has attracted growing attentions. However, the pulp density was only 1% or lower, meaning that a huge quantity of media was required for bioleaching. In this work, bioleaching behavior of the spent LIBs at pulp densities ranging from 1% to 4% was investigated and process controls to improve bioleaching performance at pulp density of 2% were explored. The results showed that the pulp density exerted a considerable influence on leaching performance of Co and Li. The bioleaching efficiency decreased respectively from 52% to 10% for Co and from 80% to 37% for Li when pulp density rose from 1% to 4%. However, the maximum extraction efficiency of 89% for Li and 72% for Co was obtained at pulp density of 2% by process controls. Bioleaching of the spent LIBs has much greater potential to occur than traditional chemical leaching based on thermodynamics analysis. The product layer diffusion model described best bioleaching behavior of Co and Li. Copyright © 2014 Elsevier Ltd. All rights reserved.

The effect of telehealth systems and satisfaction with health expenditure among patients with metabolic syndrome.

PubMed

Uei, Shu-Lin; Tsai, Chung-Hung; Kuo, Yu-Ming

2016-04-29

Telehealth cost analysis has become a crucial issue for governments in recent years. In this study, we examined cases of metabolic syndrome in Hualien County, Taiwan. This research adopted the framework proposed by Marchand to establish a study process. In addition, descriptive statistics, a t test, analysis of variance, and regression analysis were employed to analyze 100 questionnaires. The results of the t$ test revealed significant differences in medical health expenditure, number of clinical visits for medical treatment, average amount of time spent commuting to clinics, amount of time spent undergoing medical treatment, and average number of people accompanying patients to medical care facilities or assisting with other tasks in the past one month, indicating that offering telehealth care services can reduce health expenditure. The statistical analysis results revealed that customer satisfaction has a positive effect on reducing health expenditure. Therefore, this study proves that telehealth care systems can effectively reduce health expenditure and directly improve customer satisfaction with medical treatment.

Compulsive Internet use: the role of online gaming and other internet applications.

PubMed

van Rooij, Antonius J; Schoenmakers, Tim M; van de Eijnden, Regina J J M; van de Mheen, Dike

2010-07-01

Increasing research on Internet addiction makes it necessary to distinguish between the medium of Internet and its specific applications. This study explores the relationship between time spent on various Internet applications (including online gaming) and Compulsive Internet Use in a large sample of adolescents. The 2007 (N=4,920) and 2008 (N=4,753) samples of a longitudinal survey study among adolescents were used, as well as the 2007-2008 cohort subsample (N=1421). Compulsive Internet Use was predicted from the time spent on the various Internet applications in two cross-sectional multiple linear regression models and one longitudinal regression model in which changes in behavior were related to changes in Compulsive Internet Use. In both samples, downloading, social networking, MSN use, Habbo Hotel, chatting, blogging, online games, and casual games were shown to be associated with Compulsive Internet Use. Off these, online gaming was shown to have the strongest association with Compulsive Internet Use. Moreover, changes in online gaming were most strongly associated with changes in Compulsive Internet Use over time for the longitudinal cohort. A clear relationship was shown between online gaming and Compulsive Internet Use. It is further argued that a subgroup of compulsive Internet users should be classified as compulsive online gamers. Copyright (c) 2010 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Flap or soar? How a flight generalist responds to its aerial environment

PubMed Central

2016-01-01

The aerial environment is heterogeneous in space and time and directly influences the costs of animal flight. Volant animals can reduce these costs by using different flight modes, each with their own benefits and constraints. However, the extent to which animals alter their flight modes in response to environmental conditions has rarely been studied in the wild. To provide insight into how a flight generalist can reduce the energetic cost of movement, we studied flight behaviour in relation to the aerial environmental and landscape using hundreds of hours of global positioning system and triaxial acceleration measurements of the lesser black-backed gull (Larus fuscus). Individuals differed largely in the time spent in flight, which increased linearly with the time spent in flight at sea. In general, flapping was used more frequently than more energetically efficient soaring flight. The probability of soaring increased with increasing boundary layer height and time closer to midday, reflecting improved convective conditions supportive of thermal soaring. Other forms of soaring flight were also used, including fine-scale use of orographic lift. We explore the energetic consequences of behavioural adaptations to the aerial environment and underlying landscape and implications for individual energy budgets, foraging ecology and reproductive success. This article is part of the themed issue ‘Moving in a moving medium: new perspectives on flight’. PMID:27528785

The effect of switchgrass loadings on feedstock solubilization and biofuel production by Clostridium thermocellum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Verbeke, Tobin J.; Garcia, Gabriela M.; Elkins, James G.

High solids loading fermentations are necessary for the industrialization of lignocellulosic ethanol. To date, only a few studies have investigated the effect of solids loadings on microorganisms of interest for consolidated bioprocessing (CBP). Here, the effect that various switchgrass loadings have on Clostridium thermocellum solubilization and bioconversion are investigated. C. thermocellum was grown for ten days on 10, 25 or 50 g/L switchgrass or Avicel at equivalent glucan loadings. Avicel was completely consumed at all loadings, but total cellulose solubilization decreased from 63% to 37% as switchgrass loadings increased from 10 g/L to 50 g/L. Washed, spent switchgrass could bemore » additionally hydrolyzed and fermented in second-round fermentations suggesting access to fermentable substrates was not the limiting factor at higher feedstock loadings. Fermentations of Avicel or cellobiose using culture medium supplemented with 50% spent fermentation broth identified that compounds present in the samples collected from the 25 or 50 g/L switchgrass loadings were the most inhibitory to continued fermentation. Finally, recalcitrance alone cannot fully account for differences in solubilization and end-production formation between switchgrass and Avicel at increased substrate loadings. Effort to decouple metabolic inhibition from inhibition of hydrolysis suggest that C. thermocellum’s hydrolytic machinery is more vulnerable to inhibition from switchgrass-derived inhibitors than is the bacterium’s metabolism.« less

Flap or soar? How a flight generalist responds to its aerial environment.

PubMed

Shamoun-Baranes, Judy; Bouten, Willem; van Loon, E Emiel; Meijer, Christiaan; Camphuysen, C J

2016-09-26

The aerial environment is heterogeneous in space and time and directly influences the costs of animal flight. Volant animals can reduce these costs by using different flight modes, each with their own benefits and constraints. However, the extent to which animals alter their flight modes in response to environmental conditions has rarely been studied in the wild. To provide insight into how a flight generalist can reduce the energetic cost of movement, we studied flight behaviour in relation to the aerial environmental and landscape using hundreds of hours of global positioning system and triaxial acceleration measurements of the lesser black-backed gull (Larus fuscus). Individuals differed largely in the time spent in flight, which increased linearly with the time spent in flight at sea. In general, flapping was used more frequently than more energetically efficient soaring flight. The probability of soaring increased with increasing boundary layer height and time closer to midday, reflecting improved convective conditions supportive of thermal soaring. Other forms of soaring flight were also used, including fine-scale use of orographic lift. We explore the energetic consequences of behavioural adaptations to the aerial environment and underlying landscape and implications for individual energy budgets, foraging ecology and reproductive success.This article is part of the themed issue 'Moving in a moving medium: new perspectives on flight'. © 2016 The Author(s).

The effect of switchgrass loadings on feedstock solubilization and biofuel production by Clostridium thermocellum

DOE PAGES

Verbeke, Tobin J.; Garcia, Gabriela M.; Elkins, James G.

2017-11-30

High solids loading fermentations are necessary for the industrialization of lignocellulosic ethanol. To date, only a few studies have investigated the effect of solids loadings on microorganisms of interest for consolidated bioprocessing (CBP). Here, the effect that various switchgrass loadings have on Clostridium thermocellum solubilization and bioconversion are investigated. C. thermocellum was grown for ten days on 10, 25 or 50 g/L switchgrass or Avicel at equivalent glucan loadings. Avicel was completely consumed at all loadings, but total cellulose solubilization decreased from 63% to 37% as switchgrass loadings increased from 10 g/L to 50 g/L. Washed, spent switchgrass could bemore » additionally hydrolyzed and fermented in second-round fermentations suggesting access to fermentable substrates was not the limiting factor at higher feedstock loadings. Fermentations of Avicel or cellobiose using culture medium supplemented with 50% spent fermentation broth identified that compounds present in the samples collected from the 25 or 50 g/L switchgrass loadings were the most inhibitory to continued fermentation. Finally, recalcitrance alone cannot fully account for differences in solubilization and end-production formation between switchgrass and Avicel at increased substrate loadings. Effort to decouple metabolic inhibition from inhibition of hydrolysis suggest that C. thermocellum’s hydrolytic machinery is more vulnerable to inhibition from switchgrass-derived inhibitors than is the bacterium’s metabolism.« less

Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China.

PubMed

Peng, Lihong; Wang, Yejun; Chang, Chang-Tang

2014-11-01

Mercury is a physiological toxin released by spent fluorescent lamps (SFLs) and is considered a serious pollutant. As the world's largest producer of fluorescent lamps, China suffers from SFL pollution because of inefficient recycling and management of SFLs. Drawing upon the most successful practices worldwide, this paper suggests the recycling of SFLs on the basis of the extended producer responsibility (EPR) system in China. Manufacturers and importers are the main parties responsible for the take-back, recycling, and disposal ofSFLs in the EPR system. In view of the situation in China and to address the objectives of the EPR system, this paper recommends the implementation of a third-party take-back mode for small- and medium-scale enterprises and of a takeback mode for large enterprises to be carried out by original equipment manufacturers. This paper suggests an extended responsibility fund to finance and support the SFL recycling system and discusses in detail the different recycling network systems and fund flows of the two take-back modes. By conducting a case study, the authors determine that the subsidy rate for SFLs that a recycling company can obtain from the extended responsibility fund for recycling and disposing of lamps can be set at $1.35/kg. The authors also predict the levy level that fluorescent lamp manufacturers must submit.

HANSF 1.3 Users Manual FAI/98-40-R2 Hanford Spent Nuclear Fuel (SNF) Safety Analysis Model [SEC 1 and 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

DUNCAN, D.R.

The HANSF analysis tool is an integrated model considering phenomena inside a multi-canister overpack (MCO) spent nuclear fuel container such as fuel oxidation, convective and radiative heat transfer, and the potential for fission product release. This manual reflects the HANSF version 1.3.2, a revised version of 1.3.1. HANSF 1.3.2 was written to correct minor errors and to allow modeling of condensate flow on the MCO inner surface. HANSF 1.3.2 is intended for use on personal computers such as IBM-compatible machines with Intel processors running under Lahey TI or digital Visual FORTRAN, Version 6.0, but this does not preclude operation inmore » other environments.« less

Internet addiction and its correlates among high school students: a preliminary study from Ahmedabad, India.

PubMed

Yadav, Priyanka; Banwari, Girish; Parmar, Chirag; Maniar, Rajesh

2013-12-01

Internet addiction (IA) is an upcoming and less researched entity in psychiatry, especially in low and middle income countries. This is the first such effort to study IA amongst Indian school students of class 11th and 12th and to find its correlation with socio-educational characteristics, internet use patterns and psychological variables, namely depression, anxiety and stress. Six hundred and twenty one students of six English medium schools of Ahmedabad participated, of which 552 (88.9%) who completed forms were analyzed. Young's Internet Addiction Test and 21 item Depression Anxiety and Stress Scale were used to measure IA and psychological variables respectively. Logistic regression analysis was applied to find the predictors of IA. Sixty-five (11.8%) students had IA; it was predicted by time spent online, usage of social networking sites and chat rooms, and also by presence of anxiety and stress. Age, gender and self-rated academic performance did not predict IA. There was a strong positive correlation between IA and depression, anxiety and stress. IA may be a relevant clinical construct, and needs extensive research even in developing nations. All high school students suffering from depression, anxiety and stress must be screened for IA, and vice versa. Copyright © 2013 Elsevier B.V. All rights reserved.

Use of groundwater lifetime expectancy for the performance assessment of a deep geologic waste repository: 1. Theory, illustrations, and implications

NASA Astrophysics Data System (ADS)

Cornaton, F. J.; Park, Y.-J.; Normani, S. D.; Sudicky, E. A.; Sykes, J. F.

2008-04-01

Long-term solutions for the disposal of toxic wastes usually involve isolation of the wastes in a deep subsurface geologic environment. In the case of spent nuclear fuel, if radionuclide leakage occurs from the engineered barrier, the geological medium represents the ultimate barrier that is relied upon to ensure safety. Consequently, an evaluation of radionuclide travel times from a repository to the biosphere is critically important in a performance assessment analysis. In this study, we develop a travel time framework based on the concept of groundwater lifetime expectancy as a safety indicator. Lifetime expectancy characterizes the time that radionuclides will spend in the subsurface after their release from the repository and prior to discharging into the biosphere. The probability density function of lifetime expectancy is computed throughout the host rock by solving the backward-in-time solute transport adjoint equation subject to a properly posed set of boundary conditions. It can then be used to define optimal repository locations. The risk associated with selected sites can be evaluated by simulating an appropriate contaminant release history. The utility of the method is illustrated by means of analytical and numerical examples, which focus on the effect of fracture networks on the uncertainty of evaluated lifetime expectancy.

The study of lead vapor ionization in discharge with a hot cathode and efficiency of its deposition on the substrates applied for plasma separation method

NASA Astrophysics Data System (ADS)

Antonov, N. N.; Samokhin, A. A.; Zhabin, S. N.; Gavrikov, A. V.; Smirnov, V. P.

2016-11-01

Spent nuclear fuel plasma separation method approbation implies the use of model substances. Thus it is necessary to solve the problem of material conversion into a cold plasma flow, as well as the problem of deposition on collectors. For this purpose, we carried out a kinetic and hydrodynamic simulation of the discharge with hot cathode in the lead vapor (lead vapor was injected into the interelectrode gap). Dependencies of the ionization efficiency, electrostatic potential distribution, density distribution of ions and electrons in the discharge gap on the discharge current density and the model substance vapor concentration were obtained. The simulation results show that at discharge current density of about 3.5 A/cm2 and the lead vapor concentration of 2 × 1012 cm-3, the ionization efficiency is close to 60%. Experimental research of the discharge with a hot cathode in the lead vapor was carried out. We also carried out the research of the Pb condensation coefficients on various substrates. For experimental data analysis the numerical model based on Monte Carlo method was used. The research results show that deposition coefficients at medium temperatures of substrates near 70 °C do not drop lower than 75%.

Reuse of spent granular activated carbon for organic micro-pollutant removal from treated wastewater.

PubMed

Hu, Jingyi; Shang, Ran; Heijman, Bas; Rietveld, Luuk

2015-09-01

Spent granular activated carbons (sGACs) for drinking water treatments were reused via pulverizing as low-cost adsorbents for micro-pollutant adsorption from a secondary treated wastewater effluent. The changes of physicochemical characteristics of the spent carbons in relation to the fresh carbons were determined and were correlated to the molecular properties of the respective GAC influents (i.e. a surface water and a groundwater). Pore size distribution analysis showed that the carbon pore volume decreased over a wider size range due to preloading by surface water, which contains a broader molecular weight distribution of organic matter in contrast to the groundwater. However, there was still considerable capacity available on the pulverized sGACs for atrazine adsorption in demineralized water and secondary effluent, and this was particularly the case for the groundwater spent GAC. However, as compared to the fresh counterparts, the decreased surface area and the induced surface acidic groups on the pulverized sGACs contributed both to the lower uptake and the more impeded adsorption kinetic of atrazine in the demineralized water. Nonetheless, the pulverized sGACs, especially the one preloaded by surface water, was less susceptible to adsorption competition in the secondary effluent, due to its negatively charged surface which can repulse the accessibility of the co-present organic matter. This suggests the reusability of the drinking water spent GACs for micro-pollutant adsorption in the treated wastewater. Copyright © 2015 Elsevier Ltd. All rights reserved.

Innovative application of ionic liquid to separate Al and cathode materials from spent high-power lithium-ion batteries.

PubMed

Zeng, Xianlai; Li, Jinhui

2014-04-30

Because of the increasing number of electric vehicles, there is an urgent need for effective recycling technologies to recapture the significant amount of valuable metals contained in spent lithium-ion batteries (LiBs). Previous studies have indicated, however, that Al and cathode materials were quite difficult to separate due to the strong binding force supplied by the polyvinylidene fluoride (PVDF), which was employed to bind cathode materials and Al foil. This research devoted to seek a new method of melting the PVDF binder with heated ionic liquid (IL) to separate Al foil and cathode materials from the spent high-power LiBs. Theoretical analysis based on Fourier's law was adopted to determine the heat transfer mechanism of cathode material and to examine the relationship between heating temperature and retention time. All the experimental and theoretic results show that peel-off rate of cathode materials from Al foil could reach 99% when major process parameters were controlled at 180°C heating temperature, 300 rpm agitator rotation, and 25 min retention time. The results further imply that the application of IL for recycling Al foil and cathode materials from spent high-power LiBs is highly efficient, regardless of the application source of the LiBs or the types of cathode material. This study endeavors to make a contribution to an environmentally sound and economically viable solution to the challenge of spent LiB recycling. Copyright © 2014 Elsevier B.V. All rights reserved.

Depleted uranium dioxide melting in cold crucible melter and production of granules from the melt for use in casks for spent nuclear fuel and radioactive wastes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gotovchikov, V.T.; Seredenko, V.A.; Shatalov, V.V.

2007-07-01

This paper describes the results of a joint research program between the Russian Research Institute of Chemical Technology and Oak Ridge National Laboratory in the United States to develop new radiation shielding materials for use in the construction of casks for spent nuclear fuel (SNF) and radioactive wastes. Research and development is underway to develop SNF storage, transport, and disposal casks using shielding made with two new depleted uranium dioxide (DUO{sub 2}) materials: a DUO{sub 2}-steel cermet, and, DUCRETE with DUAGG (DUO{sub 2} aggregate). Melting the DUO{sub 2} and allowing it to freeze will produce a near 100% theoretical densitymore » product and assures that the product produces no volatile materials upon subsequent heating. Induction cold-crucible melters (ICCM) are being developed for this specific application. An ICCM is, potentially, a high throughput low-cost process. Schematics of a pilot facility were developed for the production of molten DUO{sub 2} from DU{sub 3}O{sub 8} to produce granules <1 mm in diameter in a continuous mode of operation. Thermodynamic analysis was conducted for uranium-oxygen system in the temperature range from 300 to 4000 K in various gas mediums. Temperature limits of stability for various uranium oxides were determined. Experiments on melting DUO{sub 2} were carried out in a high frequency ICCM in a cold crucible with a 120 mm in diameter. The microstructure of molten DUO{sub 2} was studied and lattice parameters were determined. It was experimentally proved, and validated by X-ray analysis, that an opportunity exists to produce molten DUO{sub 2} from mixed oxides (primarily DU{sub 3}O{sub 8}) by reduction melting in ICCM. This will allow using DU{sub 3}O{sub 8} directly to make DUO{sub 2}-a separate unit operation to produce UO{sub 2} feed material is not needed. Experiments were conducted concerning the addition of alloying components, gadolinium et al. oxides, into the DUO{sub 2} melt while in the crucible. These additives improve neutron and gamma radiation shielding and operation properties of the final solids. Cermet samples of 50 wt % DUO{sub 2} were produced. (authors)« less

10 CFR 72.70 - Safety analysis report updating.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Safety analysis report updating. 72.70 Section 72.70 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Records...

Performance assessment of self-interrogation neutron resonance densitometry for spent nuclear fuel assay

NASA Astrophysics Data System (ADS)

Hu, Jianwei; Tobin, Stephen J.; LaFleur, Adrienne M.; Menlove, Howard O.; Swinhoe, Martyn T.

2013-11-01

Self-Interrogation Neutron Resonance Densitometry (SINRD) is one of several nondestructive assay (NDA) techniques being integrated into systems to measure spent fuel as part of the Next Generation Safeguards Initiative (NGSI) Spent Fuel Project. The NGSI Spent Fuel Project is sponsored by the US Department of Energy's National Nuclear Security Administration to measure plutonium in, and detect diversion of fuel pins from, spent nuclear fuel assemblies. SINRD shows promising capability in determining the 239Pu and 235U content in spent fuel. SINRD is a relatively low-cost and lightweight instrument, and it is easy to implement in the field. The technique makes use of the passive neutron source existing in a spent fuel assembly, and it uses ratios between the count rates collected in fission chambers that are covered with different absorbing materials. These ratios are correlated to key attributes of the spent fuel assembly, such as the total mass of 239Pu and 235U. Using count rate ratios instead of absolute count rates makes SINRD less vulnerable to systematic uncertainties. Building upon the previous research, this work focuses on the underlying physics of the SINRD technique: quantifying the individual impacts on the count rate ratios of a few important nuclides using the perturbation method; examining new correlations between count rate ratio and mass quantities based on the results of the perturbation study; quantifying the impacts on the energy windows of the filtering materials that cover the fission chambers by tallying the neutron spectra before and after the neutrons go through the filters; and identifying the most important nuclides that cause cooling-time variations in the count rate ratios. The results of these studies show that 235U content has a major impact on the SINRD signal in addition to the 239Pu content. Plutonium-241 and 241Am are the two main nuclides responsible for the variation in the count rate ratio with cooling time. In short, this work provides insights into some of the main factors that affect the performance of SINRD, and it should help improve the hardware design and the algorithm used to interpret the signal for the SINRD technique. In addition, the modeling and simulation techniques used in this work can be easily adopted for analysis of other NDA systems, especially when complex systems like spent nuclear fuel are involved. These studies were conducted at Los Alamos National Laboratory.

Changes in physical activity levels, lesson context, and teacher interaction during physical education in culturally and linguistically diverse Australian schools

PubMed Central

2012-01-01

Background Recent data show that only 15% of Australian adolescents participate in adequate amounts of physical activity (PA) and those students from Asian and Middle-Eastern backgrounds in Grades 6–12 are significantly less active than their English-speaking background peers. Schools have recently been recognised as the most widely used and cost-effective setting for promoting PA among youth and one domain within schools where PA can occur regularly for all youth, regardless of cultural background or socio-economic status, is during physical education (PE). Methods This study describes changes in physical activity (PA), lesson context and teacher interaction in physical education over the first two years in culturally and linguistically diverse secondary schools. Grade 7 PE classes in six schools were randomly observed using systematic direct observation (n = 81) and then followed up over the same period (n = 51) twelve months later. Results There was no significant decline in moderate-to-vigorous physical activity (MVPA) during PE (MD = −4.8%; p = .777), but a significant decline and medium negative effect in time spent in vigorous physical activity (VPA) (MD = −7.9%; p = .009) during PE was observed. Significant declines and large negative effects over time in percentage of PE time spent in management (MD = −8.8%; p < .001) and the number of observations where teachers promoted PA (MD = −20.7%; p < .001). Conclusions The decline of VPA and teacher promotion of PA in culturally and linguistically diverse schools is of concern. Given the declines in VPA and the increases in time spent in game play, further research is needed to ascertain whether PE instruction could be improved by focussing on skill instruction and fitness in a games-based PE instruction model. Further research for increasing teacher promotion of PA during PE is needed. PMID:22989149

Benefit-Cost Analysis of Drug Abuse Prevention Programs: A Macroscopic Approach.

ERIC Educational Resources Information Center

Kim, Sehwan; And Others

1995-01-01

Determines the overall strategy for initiating benefit-cost analysis (BCA) in relation to drug abuse prevention programs, followed by definitions of BCA and cost-effectiveness analysis. Determines the most likely population benefit-cost efficiency ratio of 15:1, indicating that there is a $15 savings on every dollar spent on drug abuse education.…

Conjoint Analysis of Study Abroad Preferences: Key Attributes, Segments and Implications for Increasing Student Participation

ERIC Educational Resources Information Center

Garver, Michael S.; Divine, Richard L.

2008-01-01

An adaptive conjoint analysis was performed on the study abroad preferences of a sample of undergraduate college students. The results indicate that trip location, cost, and time spent abroad are the three most important determinants of student preference for different study abroad trip scenarios. The analysis also uncovered four different study…

Actinides in metallic waste from electrometallurgical treatment of spent nuclear fuel

NASA Astrophysics Data System (ADS)

Janney, D. E.; Keiser, D. D.

2003-09-01

Argonne National Laboratory has developed a pyroprocessing-based technique for conditioning spent sodium-bonded nuclear-reactor fuel in preparation for long-term disposal. The technique produces a metallic waste form whose nominal composition is stainless steel with 15 wt.% Zr (SS-15Zr), up to ˜ 11 wt.% actinide elements (primarily uranium), and a few percent metallic fission products. Actual and simulated waste forms show similar eutectic microstructures with approximately equal proportions of iron solid solution phases and Fe-Zr intermetallics. This article reports on an analysis of simulated waste forms containing uranium, neptunium, and plutonium.

An analysis of the technical status of high level radioactive waste and spent fuel management systems

NASA Technical Reports Server (NTRS)

English, T.; Miller, C.; Bullard, E.; Campbell, R.; Chockie, A.; Divita, E.; Douthitt, C.; Edelson, E.; Lees, L.

1977-01-01

The technical status of the old U.S. mailine program for high level radioactive nuclear waste management, and the newly-developing program for disposal of unreprocessed spent fuel was assessed. The method of long term containment for both of these waste forms is considered to be deep geologic isolation in bedded salt. Each major component of both waste management systems is analyzed in terms of its scientific feasibility, technical achievability and engineering achievability. The resulting matrix leads to a systematic identification of major unresolved technical or scientific questions and/or gaps in these programs.

Direct measurement of 235U in spent fuel rods with Gamma-ray mirrors

NASA Astrophysics Data System (ADS)

Ruz, J.; Brejnholt, N. F.; Alameda, J. B.; Decker, T. A.; Descalle, M. A.; Fernandez-Perea, M.; Hill, R. M.; Kisner, R. A.; Melin, A. M.; Patton, B. W.; Soufli, R.; Ziock, K.; Pivovaroff, M. J.

2015-03-01

Direct measurement of plutonium and uranium X-rays and gamma-rays is a highly desirable non-destructive analysis method for the use in reprocessing fuel environments. The high background and intense radiation from spent fuel make direct measurements difficult to implement since the relatively low activity of uranium and plutonium is masked by the high activity from fission products. To overcome this problem, we make use of a grazing incidence optic to selectively reflect Kα and Kβ fluorescence of Special Nuclear Materials (SNM) into a high-purity position-sensitive germanium detector and obtain their relative ratios.

Characterization of spent nickel-metal hydride batteries and a preliminary economic evaluation of the recovery processes.

PubMed

Lin, Sheng-Lun; Huang, Kuo-Lin; Wang, I-Ching; Chou, I-Cheng; Kuo, Yi-Ming; Hung, Chung-Hsien; Lin, Chitsan

2016-03-01

Valuable metal materials can be recovered from spent nickel-metal hydride (NiMH) batteries. However, little attention has been paid to the metal compositions of individual components of NiMH batteries, although this is important for the selection of the appropriate recycling process. In this study, NiMH batteries were manually disassembled to identify the components and to characterize the metals in each of these. A preliminary economic analysis was also conducted to evaluate the recovery of valuable metals from spent NiMH batteries using thermal melting versus simple mechanical separation. The results of this study show that metallic components account for more than 60% of battery weight. The contents of Ni, Fe, Co, and rare earth elements (REEs) (i.e., valuable metals of interest for recovery) in a single battery were 17.9%, 15.4%, 4.41%, and 17.3%, respectively. Most of the Fe was in the battery components of the steel cathode collector, cathode cap, and anode metal grid, while Ni (>90%) and Co (>90%) were mainly in the electrode active materials (anode and cathode metal powders). About 1.88 g of REEs (Ce, La, and Y) could be obtained from one spent NiMH battery. The estimated profits from recovering valuable metals from spent NiMH batteries by using thermal melting and mechanical processes are 2,329 and 2,531 USD/ton, respectively, when including a subsidy of 1,710 USD/ton. The findings of this study are very useful for further research related to technical and economic evaluations of the recovery of valuable metals from spent NiMH batteries. The spent nickel-metal hydride (NiMH) batteries were manually disassembled and their components were identified. The metals account for more than 60% of battery weight, when Ni, Fe, Co, and rare earth elements (REEs) were 17.9%, 15.4%, 4.41%, and 17.3%, respectively, in a single battery. The estimated profits of recovering valuable metals from NiMH batteries by using thermal melting and mechanical processing are 2,329 and 2,531 USD/ton, respectively, when including a subsidy of 1,710 USD/ton. These findings are very useful to develop or select the recovery methods of valuable metals from spent NiMH batteries.

Participatory Democracy: Beyond Classical Liberalism

ERIC Educational Resources Information Center

Doughty, Howard A.

2014-01-01

Postsecondary teacher, Howard Doughty, has been teaching politics and government for close to fifty years. That time has been spent not only working with the empirical analysis of political behaviour and the normative analysis of political theory, but also in the practical activity of promoting understanding of what is frequently called civic…

Marathon Group Counseling with Illicit Drug Users: Analysis of Content.

ERIC Educational Resources Information Center

Page, Richard C.; Wills, Judy

1983-01-01

Summarized a 16-hour marathon group for illicit drug users (N=12) in residential treatment. Content analysis showed the group spent more time on interpersonal relationships and relatively little time on group process. Drug users were able to successfully participate in therapeutic group discussions involving self-investment. (JAC)

Computer use and stress, sleep disturbances, and symptoms of depression among young adults – a prospective cohort study

PubMed Central

2012-01-01

Background We have previously studied prospective associations between computer use and mental health symptoms in a selected young adult population. The purpose of this study was to investigate if high computer use is a prospective risk factor for developing mental health symptoms in a population-based sample of young adults. Methods The study group was a cohort of young adults (n = 4163), 20–24 years old, who responded to a questionnaire at baseline and 1-year follow-up. Exposure variables included time spent on computer use (CU) in general, email/chat use, computer gaming, CU without breaks, and CU at night causing lost sleep. Mental health outcomes included perceived stress, sleep disturbances, symptoms of depression, and reduced performance due to stress, depressed mood, or tiredness. Prevalence ratios (PRs) were calculated for prospective associations between exposure variables at baseline and mental health outcomes (new cases) at 1-year follow-up for the men and women separately. Results Both high and medium computer use compared to low computer use at baseline were associated with sleep disturbances in the men at follow-up. High email/chat use was negatively associated with perceived stress, but positively associated with reported sleep disturbances for the men. For the women, high email/chat use was (positively) associated with several mental health outcomes, while medium computer gaming was associated with symptoms of depression, and CU without breaks with most mental health outcomes. CU causing lost sleep was associated with mental health outcomes for both men and women. Conclusions Time spent on general computer use was prospectively associated with sleep disturbances and reduced performance for the men. For the women, using the computer without breaks was a risk factor for several mental health outcomes. Some associations were enhanced in interaction with mobile phone use. Using the computer at night and consequently losing sleep was associated with most mental health outcomes for both men and women. Further studies should focus on mechanisms relating information and communication technology (ICT) use to sleep disturbances. PMID:23088719

Computer use and stress, sleep disturbances, and symptoms of depression among young adults--a prospective cohort study.

PubMed

Thomée, Sara; Härenstam, Annika; Hagberg, Mats

2012-10-22

We have previously studied prospective associations between computer use and mental health symptoms in a selected young adult population. The purpose of this study was to investigate if high computer use is a prospective risk factor for developing mental health symptoms in a population-based sample of young adults. The study group was a cohort of young adults (n = 4163), 20-24 years old, who responded to a questionnaire at baseline and 1-year follow-up. Exposure variables included time spent on computer use (CU) in general, email/chat use, computer gaming, CU without breaks, and CU at night causing lost sleep. Mental health outcomes included perceived stress, sleep disturbances, symptoms of depression, and reduced performance due to stress, depressed mood, or tiredness. Prevalence ratios (PRs) were calculated for prospective associations between exposure variables at baseline and mental health outcomes (new cases) at 1-year follow-up for the men and women separately. Both high and medium computer use compared to low computer use at baseline were associated with sleep disturbances in the men at follow-up. High email/chat use was negatively associated with perceived stress, but positively associated with reported sleep disturbances for the men. For the women, high email/chat use was (positively) associated with several mental health outcomes, while medium computer gaming was associated with symptoms of depression, and CU without breaks with most mental health outcomes. CU causing lost sleep was associated with mental health outcomes for both men and women. Time spent on general computer use was prospectively associated with sleep disturbances and reduced performance for the men. For the women, using the computer without breaks was a risk factor for several mental health outcomes. Some associations were enhanced in interaction with mobile phone use. Using the computer at night and consequently losing sleep was associated with most mental health outcomes for both men and women. Further studies should focus on mechanisms relating information and communication technology (ICT) use to sleep disturbances.

Reading the mind of children in response to food advertising: a cross-sectional study of Malaysian schoolchildren's attitudes towards food and beverages advertising on television.

PubMed

Ng, See Hoe; Kelly, Bridget; Se, Chee Hee; Sahathevan, Sharmela; Chinna, Karuthan; Ismail, Mohd Noor; Karupaiah, Tilakavati

2015-10-12

Television food advertising (TVFA) is the most dominant medium in the obesogenic environment promoting unhealthy food choices in children. This cross-sectional study investigated children's attitudes towards TVFA by examining four well-cited induction factors namely advertisement recognition, favourite advertisement, purchase request, and product preference. Malaysian urban schoolchildren (7 to 12 years) of equal ethnic distribution were voluntarily recruited (n = 402). Questionnaire administration was facilitated using a food album of 24 advertised food products. Majority of children were older (66.2 %), girls (56.7 %) with one-third either overweight or obese. TV viewing time for weekend was greater than weekdays (4.77 ± 2.60 vs 2.35 ± 1.40 h/day) and Malay children spent more time watching TV compared to Chinese (p < 0.001) and Indian (p < 0.05) children. Chinese children spent significantly more time surfing the internet compared to either Malay or Indian (p < 0.01). Median score trend was advertisement recognition > favourite advertisement and product preference > purchase request, and significantly greater (p < 0.001) for non-core than core food advertisements. TV viewing time and ethnicity significantly influenced all induction factors for non-core foods. After correcting for all influencing factors, 'favourite advertisement' (IRRfinal adj: 1.06; 95 % CI: 1.04 to 1.08), 'purchase request' (IRRfinal adj: 1.06; 95 % CI: 1.04 to 1.08) and 'product preference' (IRRfinal adj: 1.04; 95 % CI: 1.02 to 1.07) still were significantly associated with TV viewing time. For every additional hour of TV viewing, the incidence rates increased significantly by 1.04 to 1.06 for 'favourite advertisement', 'purchase request' and 'product preference' related to non-core foods amongst Malay and Indian children. However, Chinese children only demonstrated a significant association between TV viewing time and 'favourite advertisement' (IRRadj: 1.06; 95 % CI: 1.01 to 1.10). This study highlights TVFA as a powerful medium predisposing the mind of children to non-core foods through appealing TV commercials, promoting purchase request and generating unhealthy food preferences in early childhood.

Compared to Canadians, U.S. physicians spend nearly four times as much money interacting with payers.

PubMed

Zimmerman, Christina

2011-11-01

(1) In Canadian office practices, physi­cians spent 2.2 hours per week interacting with payers, nurses spent 2.5 hours, and clerical staff spent 15.9 hours. In U.S. practices, physicians spent 3.4 hours per week interacting with payers, nurses spent 20.6 hours, and clerical staff spent 53.1 hours. (2) Canadian physician practices spent $22,205 per physician per year on interactions with health plans. U.S. physician practices spent $82,975 per physician per year. (3) U.S. physician practices spend $60,770 per physician per year more (approximately four times as much) than their Canadian counterparts.

Prevalence and socio-demographic correlates of time spent cooking by adults in the 2005 UK Time Use Survey. Cross-sectional analysis☆

PubMed Central

Adams, Jean; White, Martin

2015-01-01

This study aimed to document the prevalence and socio-demographic correlates of time spent cooking by adults in the 2005 UK Time-Use Survey. Respondents reported their main activities, in 10 minute slots, throughout one 24 hour period. Activities were coded into 30 pre-defined codes, including ‘cooking, washing up’. Four measures of time spent cooking were calculated: any time spent cooking, 30 continuous minutes spent cooking, total time spent cooking, and longest continuous time spent cooking. Socio-demographic correlates were: age, employment, social class, education, and number of adults and children in the household. Analyses were stratified by gender. Data from 4214 participants were included. 85% of women and 60% of men spent any time cooking; 60% of women and 33% of men spent 30 continuous minutes cooking. Amongst women, older age, not being in employment, lower social class, greater education, and living with other adults or children were positively associated with time cooking. Few differences in time spent cooking were seen in men. Socio-economic differences in time spent cooking may have been overstated as a determinant of socio-economic differences in diet, overweight and obesity. Gender was a stronger determinant of time spent cooking than other socio-demographic variables. PMID:26004671

The examination of nursing work through a role accountability framework.

PubMed

White, Deborah E; Jackson, Karen; Besner, Jeanne; Norris, Jill M

2015-07-01

To use work analysis data to describe the amount of time registered nurses (RNs) and health care aides (HCA) spent on key clinical role accountabilities and other work activities. Health care providers are not effectively utilized. To improve their efficiency and effectiveness, it is necessary to understand how nursing providers enact their role accountabilities. Using palm pilot Function Analysis technology, observers recorded the activities of 35 registered nurse and 17 health care aides shifts on a second-by-second basis over 5 days. Work activities were classified using the Nursing Role Effectiveness Model, which conceptualizes nursing practice in terms of clinical role accountabilities. The registered nurses spent a considerable amount of time on bio-medical assessment/surveillance, relatively little time was spent on patient and family psycho-social-cultural-spiritual assessment/surveillance and support. Unlike other work sampling studies, this research project examined nursing work within a role accountability framework; an important first step in the call for the measurement of the impact of nursing care. Changes to how registered nurses and health care aides enact their role will require a clear vision by unit managers and their staff of their role accountabilities, and the gap between ideal and actual practice. © 2013 John Wiley & Sons Ltd.

Environmental, health, and safety issues of sodium-sulfur batteries for electric and hybrid vehicles. Volume 2, Battery recycling and disposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corbus, D

1992-09-01

Recycling and disposal of spent sodium-sulfur (Na/S) batteries are important issues that must be addressed as part of the commercialization process of Na/S battery-powered electric vehicles. The use of Na/S batteries in electric vehicles will result in significant environmental benefits, and the disposal of spent batteries should not detract from those benefits. In the United States, waste disposal is regulated under the Resource Conservation and Recovery Act (RCRA). Understanding these regulations will help in selecting recycling and disposal processes for Na/S batteries that are environmentally acceptable and cost effective. Treatment processes for spent Na/S battery wastes are in the beginningmore » stages of development, so a final evaluation of the impact of RCRA regulations on these treatment processes is not possible. The objectives of tills report on battery recycling and disposal are as follows: Provide an overview of RCRA regulations and requirements as they apply to Na/S battery recycling and disposal so that battery developers can understand what is required of them to comply with these regulations; Analyze existing RCRA regulations for recycling and disposal and anticipated trends in these regulations and perform a preliminary regulatory analysis for potential battery disposal and recycling processes. This report assumes that long-term Na/S battery disposal processes will be capable of handling large quantities of spent batteries. The term disposal includes treatment processes that may incorporate recycling of battery constituents. The environmental regulations analyzed in this report are limited to US regulations. This report gives an overview of RCRA and discusses RCRA regulations governing Na/S battery disposal and a preliminary regulatory analysis for Na/S battery disposal.« less

Psychometric validation of the Persian nine-item Internet Gaming Disorder Scale – Short Form: Does gender and hours spent online gaming affect the interpretations of item descriptions?

PubMed Central

Wu, Tzu-Yi; Lin, Chung-Ying; Årestedt, Kristofer; Griffiths, Mark D.; Broström, Anders; Pakpour, Amir H.

2017-01-01

Background and aims The nine-item Internet Gaming Disorder Scale – Short Form (IGDS-SF9) is brief and effective to evaluate Internet Gaming Disorder (IGD) severity. Although its scores show promising psychometric properties, less is known about whether different groups of gamers interpret the items similarly. This study aimed to verify the construct validity of the Persian IGDS-SF9 and examine the scores in relation to gender and hours spent online gaming among 2,363 Iranian adolescents. Methods Confirmatory factor analysis (CFA) and Rasch analysis were used to examine the construct validity of the IGDS-SF9. The effects of gender and time spent online gaming per week were investigated by multigroup CFA and Rasch differential item functioning (DIF). Results The unidimensionality of the IGDS-SF9 was supported in both CFA and Rasch. However, Item 4 (fail to control or cease gaming activities) displayed DIF (DIF contrast = 0.55) slightly over the recommended cutoff in Rasch but was invariant in multigroup CFA across gender. Items 4 (DIF contrast = −0.67) and 9 (jeopardize or lose an important thing because of gaming activity; DIF contrast = 0.61) displayed DIF in Rasch and were non-invariant in multigroup CFA across time spent online gaming. Conclusions Given the Persian IGDS-SF9 was unidimensional, it is concluded that the instrument can be used to assess IGD severity. However, users of the instrument are cautioned concerning the comparisons of the sum scores of the IGDS-SF9 across gender and across adolescents spending different amounts of time online gaming. PMID:28571474

Psychometric validation of the Persian nine-item Internet Gaming Disorder Scale - Short Form: Does gender and hours spent online gaming affect the interpretations of item descriptions?

PubMed

Wu, Tzu-Yi; Lin, Chung-Ying; Årestedt, Kristofer; Griffiths, Mark D; Broström, Anders; Pakpour, Amir H

2017-06-01

Background and aims The nine-item Internet Gaming Disorder Scale - Short Form (IGDS-SF9) is brief and effective to evaluate Internet Gaming Disorder (IGD) severity. Although its scores show promising psychometric properties, less is known about whether different groups of gamers interpret the items similarly. This study aimed to verify the construct validity of the Persian IGDS-SF9 and examine the scores in relation to gender and hours spent online gaming among 2,363 Iranian adolescents. Methods Confirmatory factor analysis (CFA) and Rasch analysis were used to examine the construct validity of the IGDS-SF9. The effects of gender and time spent online gaming per week were investigated by multigroup CFA and Rasch differential item functioning (DIF). Results The unidimensionality of the IGDS-SF9 was supported in both CFA and Rasch. However, Item 4 (fail to control or cease gaming activities) displayed DIF (DIF contrast = 0.55) slightly over the recommended cutoff in Rasch but was invariant in multigroup CFA across gender. Items 4 (DIF contrast = -0.67) and 9 (jeopardize or lose an important thing because of gaming activity; DIF contrast = 0.61) displayed DIF in Rasch and were non-invariant in multigroup CFA across time spent online gaming. Conclusions Given the Persian IGDS-SF9 was unidimensional, it is concluded that the instrument can be used to assess IGD severity. However, users of the instrument are cautioned concerning the comparisons of the sum scores of the IGDS-SF9 across gender and across adolescents spending different amounts of time online gaming.

Time Motion Analysis: Impact of Scribes on Provider Time Management.

PubMed

Heaton, Heather A; Wang, Rona; Farrell, Kyle J; Ruelas, Octavia S; Goyal, Deepi G; Lohse, Christine M; Sadosty, Annie T; Nestler, David M

2018-05-25

Scribes are unlicensed professionals trained in medical data entry. Limited data exist on the impact of scribes on provider time management in the emergency department (ED). Time-motion analysis is a tool utilized in business to capture detailed movements and durations to task completion. It offers a means to categorize how providers allocate their time during a clinical shift. Evaluate the impact of scribes on how ED providers spend their time. A prospective observational study was conducted to assess scribe impact on provider time utilization. Four research assistants (RAs) observed attending providers on 24 8-h control shifts (without a scribe), and 24 scribed shifts. RAs observed and categorized provider activity. Providers self-reported after-hours documentation times. Two-sample t-tests were used for normally distributed data, and Wilcoxon rank-sum tests were used for skewed data. All tests were two-sided, and p-values < 0.05 were considered statistically significant. Scribes decreased total documentation time both on shift (mean 55.3 vs. 36.4 min, p < 0.001) and post shift (mean 42.5 vs. 23.3 min, p = 0.038). They did not significantly decrease the amount of time spent reviewing the medical records or placing orders, nor did they have an impact on provider time spent at patients' bedside or time spent discussing patient care with team members. The presence of scribes decreased provider documentation time but did not change the amount of time spent at the bedside or communicating with other team members. Scribes may be a potential strategy to decrease the clerical burden. Copyright © 2018 Elsevier Inc. All rights reserved.

Assessing the level of public health partner spending using the funding formula analysis tool.

PubMed

Bernet, Patrick M

2012-01-01

Public health services are delivered through a variety of organizations. Traditional accounting of public health expenditures typically captures only spending by government agencies. New Hampshire collected information from public health partners, such as community centers that host smoking cessation classes or health education done by Girls, Inc. This study compares the new data to spending by government agencies, focusing on breakdowns by fund source and service categories. Expanded funds secured by these partners account for a 42% of all local public health spending, and they spent 4 times more than government agencies on promoting healthy behavior. The funding formula analysis tool revealed that these partners spent in ways that would be politically difficult to achieve. In an era of declining budgets, an understanding of public health's partners is increasingly vital.

Testing and COBRA-SFS analysis of the VSC-17 ventilated concrete, spent fuel storage cask

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKinnon, M.A.; Dodge, R.E.; Schmitt, R.C.

1992-04-01

A performance test of a Pacific Sierra Nuclear VSC-17 ventilated concrete storage cask loaded with 17 canisters of consolidated PWR spent fuel generating approximately 15 kW was conducted. The performance test included measuring the cask surface, concrete, air channel surface, and fuel temperatures, as well as cask surface gamma and neutron dose rates. Testing was performed using vacuum, nitrogen, and helium backfill environments. Pretest predictions of cask thermal performance were made using the COBRA-SFS computer code. Analysis results were within 15{degrees}C of measured peak fuel temperature. Peak fuel temperature for normal operation was 321{degrees}C. In general, the surface dose ratesmore » were less than 30 mrem/h on the side of the cask and 40 mrem/h on the top of the cask.« less

Dual computer monitors to increase efficiency of conducting systematic reviews.

PubMed

Wang, Zhen; Asi, Noor; Elraiyah, Tarig A; Abu Dabrh, Abd Moain; Undavalli, Chaitanya; Glasziou, Paul; Montori, Victor; Murad, Mohammad Hassan

2014-12-01

Systematic reviews (SRs) are the cornerstone of evidence-based medicine. In this study, we evaluated the effectiveness of using two computer screens on the efficiency of conducting SRs. A cohort of reviewers before and after using dual monitors were compared with a control group that did not use dual monitors. The outcomes were time spent for abstract screening, full-text screening and data extraction, and inter-rater agreement. We adopted multivariate difference-in-differences linear regression models. A total of 60 SRs conducted by 54 reviewers were included in this analysis. We found a significant reduction of 23.81 minutes per article in data extraction in the intervention group relative to the control group (95% confidence interval: -46.03, -1.58, P = 0.04), which was a 36.85% reduction in time. There was no significant difference in time spent on abstract screening, full-text screening, or inter-rater agreement between the two groups. Using dual monitors when conducting SRs is associated with significant reduction of time spent on data extraction. No significant difference was observed on time spent on abstract screening or full-text screening. Using dual monitors is one strategy that may improve the efficiency of conducting SRs. Copyright © 2014 Elsevier Inc. All rights reserved.

Neutron radiation characteristics of the IVth generation reactor spent fuel

NASA Astrophysics Data System (ADS)

Bedenko, Sergey; Shamanin, Igor; Grachev, Victor; Knyshev, Vladimir; Ukrainets, Olesya; Zorkin, Andrey

2018-03-01

Exploitation of nuclear power plants as well as construction of new generation reactors lead to great accumulation of spent fuel in interim storage facilities at nuclear power plants, and in spent fuel «wet» and «dry» long-term storages. Consequently, handling the fuel needs more attention. The paper is focused on the creation of an efficient computational model used for developing the procedures and regulations of spent nuclear fuel handling in nuclear fuel cycle of the new generation reactor. A Thorium High-temperature Gas-Cooled Reactor Unit (HGTRU, Russia) was used as an object for numerical research. Fuel isotopic composition of HGTRU was calculated using the verified code of the MCU-5 program. The analysis of alpha emitters and neutron radiation sources was made. The neutron yield resulting from (α,n)-reactions and at spontaneous fission was calculated. In this work it has been shown that contribution of (α,n)-neutrons is insignificant in case of such (Th,Pu)-fuel composition and HGTRU operation mode, and integral neutron yield can be approximated by the Watt spectral function. Spectral and standardized neutron distributions were achieved by approximation of the list of high-precision nuclear data. The distribution functions were prepared in group and continuous form for further use in calculations according to MNCP, MCU, and SCALE.

77 FR 24539 - Virginia Electric and Power Company; Surry Power Station Units 1 and 2; Independent Spent Fuel...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-24

... bounding thermal analysis using ANSYS finite element software to evaluate the misloading events. The ANSYS analysis consists of a half-symmetric, three-dimensional model of a 32PTH DSC with a number of conservative... the maximum fuel cladding temperature presented in the UFSAR analysis dated October 2, 2009, with the...

A comparison of critical care research funding and the financial burden of critical illness in the United States.

PubMed

Coopersmith, Craig M; Wunsch, Hannah; Fink, Mitchell P; Linde-Zwirble, Walter T; Olsen, Keith M; Sommers, Marilyn S; Anand, Kanwaljeet J S; Tchorz, Kathryn M; Angus, Derek C; Deutschman, Clifford S

2012-04-01

To estimate federal dollars spent on critical care research, the cost of providing critical care, and to determine whether the percentage of federal research dollars spent on critical care research is commensurate with the financial burden of critical care. The National Institutes of Health Computer Retrieval of Information on Scientific Projects database was queried to identify funded grants whose title or abstract contained a key word potentially related to critical care. Each grant identified was analyzed by two reviewers (three if the analysis was discordant) to subjectively determine whether it was definitely, possibly, or definitely not related to critical care. Hospital and total costs of critical care were estimated from the Premier Database, state discharge data, and Medicare data. To estimate healthcare expenditures associated with caring for critically ill patients, total costs were calculated as the combination of hospitalization costs that included critical illness as well as additional costs in the year after hospital discharge. Of 19,257 grants funded by the National Institutes of Health, 332 (1.7%) were definitely related to critical care and a maximum of 1212 (6.3%) grants were possibly related to critical care. Between 17.4% and 39.0% of total hospital costs were spent on critical care, and a total of between $121 and $263 billion was estimated to be spent on patients who required intensive care. This represents 5.2% to 11.2%, respectively, of total U.S. healthcare spending. The proportion of research dollars spent on critical care is lower than the percentage of healthcare expenditures related to critical illness.

U.S. Army physical demands study: Prevalence and frequency of performing physically demanding tasks in deployed and non-deployed settings.

PubMed

Boye, Michael W; Cohen, Bruce S; Sharp, Marilyn A; Canino, Maria C; Foulis, Stephen A; Larcom, Kathleen; Smith, Laurel

2017-11-01

To compare percentages of on-duty time spent performing physically demanding soldier tasks in non-deployed and deployed settings, and secondarily examine the number of physically demanding tasks performed among five Army combat arms occupational specialties. Job task analysis. Soldiers (n=1295; over 99% serving on active duty) across five Army jobs completed one of three questionnaires developed using reviews of job and task related documents, input from subject matter experts, observation of task performance, and conduct of focus groups. Soldiers reported estimates of the total on-duty time spent performing physically demanding tasks in both deployed and non-deployed settings. One-way analyses of variance and Duncan post-hoc tests were used to compare percentage time differences by job. Two-tailed t-tests were used to evaluate differences by setting. Frequency analyses were used to present supplementary findings. Soldiers reported performing physically demanding job-specific tasks 17.7% of the time while non-deployed and 19.6% of the time while deployed. There were significant differences in time spent on job-specific tasks across settings (p<0.05) for three of five occupational specialties. When categories of physically demanding tasks were grouped, all soldiers reported spending more time on physically demanding tasks when deployed (p<0.001). Twenty-five percent reported performing less than half the physically demanding tasks represented on the questionnaire in the last two years. Soldiers spent more time performing physically demanding tasks while deployed compared to non-deployed but spent similar amounts of time performing job-specific tasks. Published by Elsevier Ltd.

One-day quantitative cross-sectional study of family information time in 90 intensive care units in France.

PubMed

Fassier, Thomas; Darmon, Michel; Laplace, Christian; Chevret, Sylvie; Schlemmer, Benoit; Pochard, Frédéric; Azoulay, Elie

2007-01-01

Providing family members with clear, honest, and timely information is a major task for intensive care unit physicians. Time spent informing families has been associated with effectiveness of information but has not been measured in specifically designed studies. To measure time spent informing families of intensive care unit patients. One-day cross-sectional study in 90 intensive care units in France. Clocked time spent by physicians informing the families of each of 951 patients hospitalized in the intensive care unit during a 24-hr period. Median family information time was 16 (interquartile range, 8-30) mins per patient, with 20% of the time spent explaining the diagnosis, 20% on explaining treatments, and 60% on explaining the prognosis. One third of the time was spent listening to family members. Multivariable analysis identified one factor associated with less information time (room with more than one bed) and seven factors associated with more information time, including five patient-related factors (surgery on the study day, higher Logistic Organ Dysfunction score, coma, mechanical ventilation, and worsening clinical status) and two family-related factors (first contact with family and interview with the spouse). Median information time was 20 (interquartile range, 10-39) mins when three factors were present and 106.5 (interquartile range, 103-110) mins when five were present. This study identifies factors associated with information time provided by critical care physicians to family members of critically ill patients. Whether information time correlates with communication difficulties or communication skills needs to be evaluated. Information time provided by residents and nurses should be studied.

Does patient time spent viewing computer-tailored colorectal cancer screening materials predict patient-reported discussion of screening with providers?

PubMed

Sanders, Mechelle; Fiscella, Kevin; Veazie, Peter; Dolan, James G; Jerant, Anthony

2016-08-01

The main aim is to examine whether patients' viewing time on information about colorectal cancer (CRC) screening before a primary care physician (PCP) visit is associated with discussion of screening options during the visit. We analyzed data from a multi-center randomized controlled trial of a tailored interactive multimedia computer program (IMCP) to activate patients to undergo CRC screening, deployed in primary care offices immediately before a visit. We employed usage time information stored in the IMCP to examine the association of patient time spent using the program with patient-reported discussion of screening during the visit, adjusting for previous CRC screening recommendation and reading speed.On average, patients spent 33 minutes on the program. In adjusted analyses, 30 minutes spent using the program was associated with a 41% increase in the odds of the patient having a discussion with their PCP (1.04, 1.59, 95% CI). In a separate analysis of the tailoring modules; the modules encouraging adherence to the tailored screening recommendation and discussion with the patient's PCP yielded significant results. Other predictors of screening discussion included better self-reported physical health and increased patient activation. Time spent on the program predicted greater patient-physician discussion of screening during a linked visit.Usage time information gathered automatically by IMCPs offers promise for objectively assessing patient engagement around a topic and predicting likelihood of discussion between patients and their clinician. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Does a satisfactory relationship with her mother influence when a 16-year-old begins to have sex?

PubMed

Kovar, Cheryl L; Salsberry, Pamela J

2012-01-01

To examine aspects of the mother-daughter relationship as perceived by the 16-year-old (cohesion, flexibility, communication, monitoring, and satisfaction with time spent together) as they relate to when the daughter began having sex. A secondary analysis using data from the National Longitudinal Survey of Youth Child (1992-2000) and Young Adult (1996-2004) surveys were analyzed (N = 1,592). Logistic regression models estimated reports of cohesion, flexibility, communication, monitoring, and satisfaction with time spent together with sexual initiation by age 16. All models controlled for the mother's sociodemographic characteristics, lack of independence due to sisters in the sample, and extended time away from mother. Girls who reported being satisfied with the amount of time spent with their mother were less likely to report early sexual initiation. In addition, these girls were three times more likely to report good communication and four times more likely to report high levels of cohesion with their mothers. Individually, in addition to satisfaction with time spent together, high levels of cohesion and good communication were also associated with lower reports of sexual initiation by age 16. The feeling of being satisfied with the time spent together appears to be a global measure of the individual dimensions of cohesion and communication. Efforts in delaying sexual initiation in adolescents need to be directed at the mother-daughter relationship. Interventions to develop these dimensions within the relationship during early adolescence, as compared to interventions when sexual activity may have already occurred, are warranted.

Approach for validating actinide and fission product compositions for burnup credit criticality safety analyses

DOE PAGES

Radulescu, Georgeta; Gauld, Ian C.; Ilas, Germina; ...

2014-11-01

This paper describes a depletion code validation approach for criticality safety analysis using burnup credit for actinide and fission product nuclides in spent nuclear fuel (SNF) compositions. The technical basis for determining the uncertainties in the calculated nuclide concentrations is comparison of calculations to available measurements obtained from destructive radiochemical assay of SNF samples. Probability distributions developed for the uncertainties in the calculated nuclide concentrations were applied to the SNF compositions of a criticality safety analysis model by the use of a Monte Carlo uncertainty sampling method to determine bias and bias uncertainty in effective neutron multiplication factor. Application ofmore » the Monte Carlo uncertainty sampling approach is demonstrated for representative criticality safety analysis models of pressurized water reactor spent fuel pool storage racks and transportation packages using burnup-dependent nuclide concentrations calculated with SCALE 6.1 and the ENDF/B-VII nuclear data. Furthermore, the validation approach and results support a recent revision of the U.S. Nuclear Regulatory Commission Interim Staff Guidance 8.« less

Line transport in turbulent atmosphere

NASA Astrophysics Data System (ADS)

Nikoghossian, Artur

We consider the spectral line transfer in turbulent atmospheres with a spatially correlated velocity field. Both the finite and semi-infinite media are treated. In finding the observed intensities we first deal with the problem for determining the mean intensity of radiation emerging from the medium for a fixed value of turbulent velocity at its boundary. New approach proposed in solving this problem is based on invariant imbedding technique which yields the solution of the proper problems for a family of media of different optical thicknesses and allows tackling different kinds of inhomogeneous problems. The dependence of the line profile, integral intensity and the line width on the mean correlation length and average value of the hydrodynamic velocity is studied. It is shown that the transition from a micro-turbulent regime to a macro-turbulent one occurs within a comparatively narrow range of variation in the correlation length. The diffuse reflection of the line radiation from a one-dimensional semi-infinite turbulent atmosphere is examined. In addition to the observed spectral line profile, statistical averages describing the diffusion process in the atmosphere (mean number of scattering events, average time spent by a diffusing photon in the medium) are determined. The dependence of these quantities on the average hydrodynamic velocity and correlation coefficient is studied.

Line Transport in Turbulent Atmospheres

NASA Astrophysics Data System (ADS)

Nikoghossian, A. G.

2017-07-01

The spectral line transfer in turbulent atmospheres with a spatially correlated velocity field is examined. Both the finite and semi-infinite media are treated. In finding the observed intensities we first deal with the problem for determining the mean intensity of radiation emerging from the medium for a fixed value of turbulent velocity at its boundary. A new approach proposed for solving this problem is based on the invariant imbedding technique which yields the solution of the proper problems for a family of media of different optical thicknesses and allows tackling different kinds of inhomogeneous problems. The dependence of the line profile, integral intensity, and the line width on the mean correlation length and the average value of the hydrodynamic velocity is studied. It is shown that the transition from a micro-turbulent regime to a macro-turbulence occurs within a comparatively narrow range of variation in the correlation length . Ambartsumian's principle of invariance is used to solve the problem of diffuse reflection of the line radiation from a one-dimensional semi-infinite turbulent atmosphere. In addition to the observed spectral line profile, statistical averages describing the diffusion process in the atmosphere (mean number of scattering events, average time spent by a diffusing photon in the medium) are determined. The dependence of these quantities on the average hydrodynamic velocity and correlation coefficient is studied.

REACTOR PHYSICS MODELING OF SPENT RESEARCH REACTOR FUEL FOR TECHNICAL NUCLEAR FORENSICS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, T.; Beals, D.; Sternat, M.

2011-07-18

Technical nuclear forensics (TNF) refers to the collection, analysis and evaluation of pre- and post-detonation radiological or nuclear materials, devices, and/or debris. TNF is an integral component, complementing traditional forensics and investigative work, to help enable the attribution of discovered radiological or nuclear material. Research is needed to improve the capabilities of TNF. One research area of interest is determining the isotopic signatures of research reactors. Research reactors are a potential source of both radiological and nuclear material. Research reactors are often the least safeguarded type of reactor; they vary greatly in size, fuel type, enrichment, power, and burn-up. Manymore » research reactors are fueled with highly-enriched uranium (HEU), up to {approx}93% {sup 235}U, which could potentially be used as weapons material. All of them have significant amounts of radiological material with which a radioactive dispersal device (RDD) could be built. Therefore, the ability to attribute if material originated from or was produced in a specific research reactor is an important tool in providing for the security of the United States. Currently there are approximately 237 operating research reactors worldwide, another 12 are in temporary shutdown and 224 research reactors are reported as shut down. Little is currently known about the isotopic signatures of spent research reactor fuel. An effort is underway at Savannah River National Laboratory (SRNL) to analyze spent research reactor fuel to determine these signatures. Computer models, using reactor physics codes, are being compared to the measured analytes in the spent fuel. This allows for improving the reactor physics codes in modeling research reactors for the purpose of nuclear forensics. Currently the Oak Ridge Research reactor (ORR) is being modeled and fuel samples are being analyzed for comparison. Samples of an ORR spent fuel assembly were taken by SRNL for analytical and radiochemical analysis. The fuel assembly was modeled using MONTEBURNS(MCNP5/ ORIGEN2.2) and MCNPX/CINDER90. The results from the models have been compared to each other and to the measured data.« less

Environmental Review Guide for Operations (ERGO) - A Compliance Assessment Manual for Use at All USACE Civil-Funded Projects and Facilities

DTIC Science & Technology

1994-03-01

other Pickling liquor and other corrosive alkalies corrosive acids Lime wastewater Spent acid Lime and water Spent mixed acid Spent caustic Spent ...acid Spent caustic Spent sulfuric acid Potential Consequences: heat generation; violent reaction. 4 - 161 Appendix 4-6 (continued) Group 2-A Group 2-B1...topical bleach (STB) Ordnance, ammunition, explosives & residues Battery acid & caustics (in unserviceable batteries) Some pharmaceuticals Petroleum, oil

Performance Indicators of the Top Basketball Players: Relations with Several Variables.

PubMed

Sindik, Josko

2015-09-01

The aim of this study was to determine the differences in performance indicators for top senior male basketball players, with respect to several independent variables: position in the team, total situation-related efficiency, age, playing experience and the time spent on the court within the game and during championship season. The final sample of participants was selected from all teams in A-1 Croatian men's basketball league. Significant differences have been found according to the players': position in the team, total situation-related efficiency, and in interactions of the position in the team / total situation-related efficiency and minutes spent on the court in a game / playing experience. The differences in the situation-related efficiency between players have not been found according to the players' age and the number of games played. Further research can be directed towards deeper analysis of the influence of more complex differentiated variables playing experience and time spent on the court in a game on situation-related efficiency in basketball.

High Antioxidant Action and Prebiotic Activity of Hydrolyzed Spent Coffee Grounds (HSCG) in a Simulated Digestion-Fermentation Model: Toward the Development of a Novel Food Supplement.

PubMed

Panzella, Lucia; Pérez-Burillo, Sergio; Pastoriza, Silvia; Martín, María Ángeles; Cerruti, Pierfrancesco; Goya, Luis; Ramos, Sonia; Rufián-Henares, José Ángel; Napolitano, Alessandra; d'Ischia, Marco

2017-08-09

Spent coffee grounds are a byproduct with a large production all over the world. The aim of this study was to explore the effects of a simulated digestion-fermentation treatment on hydrolyzed spent coffee grounds (HSCG) and to investigate the antioxidant properties of the digestion and fermentation products in the human hepatocellular carcinoma HepG2 cell line. The potentially bioaccessible (soluble) fractions exhibited high chemoprotective activity in HepG2 cells against oxidative stress. Structural analysis of both the indigestible (insoluble) and soluble material revealed partial hydrolysis and release of the lignin components in the potentially bioaccessible fraction following simulated digestion-fermentation. A high prebiotic activity as determined from the increase in Lactobacillus spp. and Bifidobacterium spp. and the production of short-chain fatty acids (SCFAs) following microbial fermentation of HSCG was also observed. These results pave the way toward the use of HSCG as a food supplement.

Optical Measurements of Tumbling Rocket Bodies

NASA Technical Reports Server (NTRS)

Read, J.; Cowardin, H.; Liou, J.-C.

2012-01-01

A component of interest in the active debris removal (ADR) effort in low Earth orbit is spent rocket upper stages. Proximity operations for such missions require an understanding of the tumbling characteristics of these targets. This research was conducted to assist in laying the ground work for realistic ADR mission planning. To better understand the tumbling characteristics of these spent upper stages, the NASA Orbital Debris Program Office has acquired over 400 recorded lightcurves using telescopes located in Colorado and New Mexico. This effort focuses on a population of over 250 Russian SL-8 and SL-16 spent upper stages. The oldest of these have been in orbit for 45 years, and some have exhibited unplanned orbit changes up to 22 years after launch. This paper describes the techniques of how this optical data was acquired and summarizes the optical signatures for this population of targets, including categorization, tumbling period, and investigations into specific targets in which the optical signature changed dramatically over different time periods. Results from period analysis performed on these lightcurves are summarized.

Body position and direction preferences in horses during road transport.

PubMed

Smith, B L; Jones, J H; Carlson, G P; Pascoe, J R

1994-09-01

It has been hypothesised that horses have a preference for facing backward in a trailer during road transport in order to minimise shifts of body weight due to accelerations and decelerations. To determine if horses have preferences for facing forward vs. backward in a horse trailer, the authors analysed the percentages of time horses spent in different body positions and directions while standing in a moving or parked horse trailer. Body positions and directions of 8 Thoroughbred geldings were videotaped while horses were transported singly and untethered in a 4-horse stock trailer over a 32 km route of country roads; or while the same horses were untethered in the same trailer stationary in a parking lot. Analysis of the logit-transformed percentages of time horses spent in different directions indicated that they spent significantly more time facing backward when the trailer was in motion, but not when it was parked. Several horses displayed strong individual preferences for the directions they faced during road transport.

Comparative study on adsorption of crude oil and spent engine oil from seawater and freshwater using algal biomass.

PubMed

Boleydei, Hamid; Mirghaffari, Nourollah; Farhadian, Omidvar

2018-05-15

Efficiency of a biosorbent prepared from the green macroalga Enteromorpha intestinalis biomass for decontamination of seawater and freshwater polluted by crude oil and engine spent oil was compared. The effect of different experimental conditions including contact time, pH, particle size, initial oil concentration, and biosorbent dose on the oil biosorption was studied in the batch method. The biosorbent was characterized by CHNOS, FTIR, and SEM analysis. The experimental data were well fitted to the pseudo-second-order kinetic model and the Langmuir adsorption isotherm model. Based on the obtained results, the adsorption of spent oil with higher viscosity was better than crude oil. The biosorption of oil hydrocarbons from seawater was more efficient than freshwater. The algal biomasses which are abundantly available could be effectively used as a low-cost and environmentally friendly adsorbent for remediation of oil spill in the marine environments or in the water and wastewater treatment.

Application of a cell-once-through perfusion strategy for production of recombinant antibody from rCHO cells in a Centritech Lab II centrifuge system.

PubMed

Kim, Byoung Jin; Chang, Ho Nam; Oh, Duk Jae

2007-01-01

Based upon the results of scale-down intermittent perfusion processes, a cell-once-through (COT) perfusion concept was applied to a dual bioreactor system coupled to a Centritech Lab II centrifuge for culture of recombinant Chinese hamster ovary (rCHO) cells for monoclonal antibody production. In this new culture mode, i.e., the COT perfusion process, total spent medium was transferred to the centrifuge and a fixed percentage was removed. Approximately 99% of the viable cells are transferred to another bioreactor filled with fresh medium by single operation of the Centritech Lab II centrifuge system for about 30 min. Accordingly, a significant reduction of the cell-passage frequency to the centrifuge led to minimization of cell damage caused by mechanical shear stress, oxygen limitation, nutrient limitation, and low temperature outside the bioreactor. The effects of culture temperature shift and fortified medium on cell growth and recombinant antibody production in the COT perfusion process were investigated. Although the suppressive effects of low culture temperature on cell growth led to a loss of stability in a long-term COT perfusion culture system, the average antibody concentration at 33 degrees C was 157.8 mg/L, approximately 2.4-fold higher than that at 37 degrees C. By the use of a fortified medium at 37 degrees C, rCHO cells were maintained at high density above 1.2 x 10(7) cells/mL, and antibody was produced continuously in a range of 260-280 mg/L in a stable long-term COT perfusion culture. The proposed new culture mode, the COT perfusion approach, guarantees the recovery of rCHO cells damaged by lowered temperature or high lactate and ammonium concentration. It will be an attractive choice for minimization of cell damage and stable long-term antibody production with high cell density.

A gastrointestinal anti-infectious biotherapeutic agent: the heat-treated Lactobacillus LB

PubMed Central

Liévin-Le Moal, Vanessa

2016-01-01

Experimental in vitro and in vivo studies support the hypothesis that heat-treated, lyophilized Lactobacillus acidophilus LB cells and concentrated, neutralized spent culture medium conserve the variety of pharmacological, antimicrobial activities of the live probiotic strain against several infectious agents involved in well-established acute and persistent watery diarrhoea and gastritis. Heat-treated cells and heat-stable secreted molecules trigger multiple strain-specific activities explaining the therapeutic efficacy of L. acidophilus LB. This review discusses the current body of knowledge on the antimicrobial mechanisms of action exerted by L. acidophilus LB demonstrated in in vitro and in vivo experimental studies, and the evidence for the therapeutic efficacy of this anti-infectious biotherapeutic agent proved in randomized clinical trials for the treatment of acute and persistent watery diarrhoea associated with several intestinal infectious diseases in humans. PMID:26770268

Lubricating system for thermal medium delivery parts in a gas turbine

DOEpatents

Mashey, Thomas Charles

2002-01-01

Cooling steam delivery tubes extend axially along the outer rim of a gas turbine rotor for supplying cooling steam to and returning spent cooling steam from the turbine buckets. Because of the high friction forces at the interface of the tubes and supporting elements due to rotor rotation, a low coefficient of friction coating is provided at the interface of the tubes and support elements. On each surface, a first coating of a cobalt-based alloy is sprayed onto the surface at high temperature. A portion of the first coating is machined off to provide a smooth, hard surface. A second ceramic-based solid film lubricant is sprayed onto the first coating. By reducing the resistance to axial displacement of the tubes relative to the supporting elements due to thermal expansion, the service life of the tubes is substantially extended.

Galactic Cosmic Rays in the Outer Heliosphere

NASA Technical Reports Server (NTRS)

Florinski, V.; Washimi, H.; Pogorelov, N. V.; Adams, J. H.

2010-01-01

We report a next generation model of galactic cosmic ray (GCR) transport in the three dimensional heliosphere. Our model is based on an accurate three-dimensional representation of the heliospheric interface. This representation is obtained by taking into account the interaction between partially ionized, magnetized plasma flows of the solar wind and the local interstellar medium. Our model reveals that after entering the heliosphere GCRs are stored in the heliosheath for several years. The preferred GCR entry locations are near the nose of the heliopause and at high latitudes. Low-energy (hundreds of MeV) galactic ions observed in the heliosheath have spent, on average, a longer time in the solar wind than those observed in the inner heliosphere, which would explain their cooled-off spectra at these energies. We also discuss radial gradients in the heliosheath and the implications for future Voyager observations

Physical activity and sedentary lifestyle among children from private and public schools in Northern Brazil.

PubMed

Oliveira, Thiara Castro de; Silva, Antônio Augusto Moura da; Santos, Cristiane de Jesus Nunes dos; Silva, Josenilde Sousa e; Conceição, Sueli Ismael Oliveira da

2010-12-01

To analyze factors associated with physical activity and the mean time spent in some sedentary activities among school-aged children. A cross-sectional study was carried out in a random sample of 592 schoolchildren aged nine to 16 years in 2005, in São Luís, Northern Brazil. Data were collected by means of a 24-Hour Physical Activity Recall Questionnaire, concerning demographic and socioeconomic variables, physical activities practiced and time spent in certain sedentary activities. Physical activities were classified according to their metabolic equivalents (MET), and a physical activity index was estimated for each child. Sedentary lifestyle was estimated based on time spent watching television, playing videogames and on the computer/internet. Chi square test was used to compare proportions. Linear regression analysis was used to establish associations. Estimates were adjusted for the effect of the sampling design. The mean of the physical activity index was 605.73 MET-min/day (SD = 509.45). School children that were male (coefficient=134.57; 95%CI 50.77; 218.37), from public schools (coefficient.= 94.08; 95%CI 12.54; 175.62 and in the 5th to 7th grade (coefficient.=95.01; 95%CI 8.10;181.92 presented higher indices than females, children from private schools and in the 8th to the 9th grade (p<0.05). On average, students spent 2.66 hours/day in sedentary activities. Time spent in sedentary activities was significantly lower for children aged nine to 11 years (coefficient.= -0.49 hr/day; 95%CI -0.88; -0.10) and in lower socioeconomic classes (coefficient.=-0.87; 95%CI -1.45;-0.30). Domestic chores (59.43%) and walking to school (58.43%) were the most common physical activities. Being female, in private schools and in the 8th to 9th grade were factors associated with lower levels of physical activity. Younger schoolchildren and those from low economic classes spent less time engaged in sedentary activities.

Potential Uses of Occupational Analysis Data By Air Force Management Engineering Teams.

ERIC Educational Resources Information Center

McFarland, Barry P.

Both the occupational analysis program and the management engineering program are primarily concerned with task level descriptions of time spent to perform tasks required in the Air Force, the first being personnel specialty code oriented and the second being work center oriented. However two separate and independent techniques have been developed…

Using Modules in Teaching Complex Analysis

ERIC Educational Resources Information Center

Kinney, William M.

2017-01-01

Educational modules can play an important part in revitalizing the teaching and learning of complex analysis. At the Westmont College workshop on the subject in June 2014, time was spent generating ideas and creating structures for module proposals. Sharing some of those ideas and giving a few example modules is the main purpose of this paper. The…

Energy analysis and break-even distance for transportation for biofuels in comparison to fossil fuels

USDA-ARS?s Scientific Manuscript database

In the present analysis various forms fuel from biomass and fossil sources, their mass and energy densities, and their break-even transportation distances to transport them effectively were analyzed. This study gives an insight on how many times more energy spent on transporting the fuels to differe...

10 CFR 72.240 - Conditions for spent fuel storage cask renewal.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to exceed 40 years. In the event that the certificate holder does not apply for a cask design renewal...) The application must be accompanied by a safety analysis report (SAR). The SAR must include the following: (1) Design bases information as documented in the most recently updated final safety analysis...

10 CFR 72.240 - Conditions for spent fuel storage cask renewal.

Code of Federal Regulations, 2012 CFR

2012-01-01

... to exceed 40 years. In the event that the certificate holder does not apply for a cask design renewal...) The application must be accompanied by a safety analysis report (SAR). The SAR must include the following: (1) Design bases information as documented in the most recently updated final safety analysis...

10 CFR 72.240 - Conditions for spent fuel storage cask renewal.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to exceed 40 years. In the event that the certificate holder does not apply for a cask design renewal...) The application must be accompanied by a safety analysis report (SAR). The SAR must include the following: (1) Design bases information as documented in the most recently updated final safety analysis...

75 FR 45172 - Withdrawal of Regulatory Guides 3.44 and 3.49

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-02

... Format and Content for the Safety Analysis Report for an Independent Spent Fuel Storage Installation... on the format and content of the safety analysis report that is required as part of an application to...: Nuclear Regulatory Commission. ACTION: Withdrawal of Regulatory Guide 3.44, ``Standard Format and Content...

SFCOMPO 2.0 - A relational database of spent fuel isotopic measurements, reactor operational histories, and design data

NASA Astrophysics Data System (ADS)

Michel-Sendis, Franco; Martinez-González, Jesus; Gauld, Ian

2017-09-01

SFCOMPO-2.0 is a database of experimental isotopic concentrations measured in destructive radiochemical analysis of spent nuclear fuel (SNF) samples. The database includes corresponding design description of the fuel rods and assemblies, relevant operating conditions and characteristics of the host reactors necessary for modelling and simulation. Aimed at establishing a thorough, reliable, and publicly available resource for code and data validation of safety-related applications, SFCOMPO-2.0 is developed and maintained by the OECD Nuclear Energy Agency (NEA). The SFCOMPO-2.0 database is a Java application which is downloadable from the NEA website.

Fishing decisions under uncertainty

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, C.G.

1982-02-01

The drilling manager often is forced by an extended fishing operation to choose between the known costs incurred with abandonment of retrieval attempts and the unknown costs of continuing fishing operations. The successful manager makes the decision that costs the company the least money. Continuing fishing operations beyond some economic limit is failure, even if the fish is retrieved and that portion of the hole saved, because more money has been spent in the fishing attempt than would have been spent by not fishing. The strategy is to minimize losses. This analysis closely follows the theory of utility developed bymore » J. von Neuman and O. Morgenstern. 1 ref.« less

Assessment of the Risk of Medium-Term Internal Contamination in Minamisoma City, Fukushima, Japan, after the Fukushima Dai-ichi Nuclear Accident

PubMed Central

Gilmour, Stuart; Tsubokura, Masaharu; Nomura, Shuhei; Kami, Masahiro; Oikawa, Tomoyoshi; Kanazawa, Yukio; Shibuya, Kenji

2014-01-01

Background: The Fukushima Dai-ichi nuclear disaster, the first level-7 major nuclear disaster since Chernobyl, raised concerns about the future health consequences of exposure to and intake of radionuclides. Factors determining the risk and level of internal radiation contamination after a nuclear accident, which are a key to understanding and improving current nuclear disaster management, are not well studied. Objective: We investigated both the prevalence and level of internal contamination in residents of Minamisoma, and identified factors determining the risk and levels of contamination. Methods: We implemented a program assessing internal radiation contamination using a whole body counter (WBC) measurement and a questionnaire survey in Minamisoma, between October 2011 and March 2012. Results: Approximately 20% of the city’s population (8,829 individuals) participated in the WBC measurement for internal contamination, of which 94% responded to the questionnaire. The proportion of participants with detectable internal contamination was 40% in adults and 9% in children. The level of internal contamination ranged from 2.3 to 196.5 Bq/kg (median, 11.3 Bq/kg). Tobit regression analysis identified two main risk factors: more time spent outdoors, and intake of potentially contaminated foods and water. Conclusions: Our findings suggest that, with sensible and reasonable precautions, people may be able to live continuously in radiation-affected areas with limited contamination risk. To enable this, nuclear disaster response should strictly enforce food and water controls and disseminate evidence-based and up-to-date information about avoidable contamination risks. Citation: Sugimoto A, Gilmour S, Tsubokura M, Nomura S, Kami M, Oikawa T, Kanazawa Y, Shibuya K. 2014. Assessment of the risk of medium-term internal contamination in Minamisoma City, Fukushima, Japan, after the Fukushima Dai-ichi Nuclear accident. Environ Health Perspect 122:587–593; http://dx.doi.org/10.1289/ehp.1306848 PMID:24633072

Analysis of Transportation Options for Commercial Spent Fuel in the U.S.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalinina, Elena; Busch, Ingrid Karin

The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S.more » Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage The U.S. Department of Energy (DOE) is laying the groundwork for implementing interim storage and associated transportation of spent nuclear fuel (SNF) highand associated transportation of spent nuclear fuel (SNF) and high and associated transportation of spent nuclear fuel (SNF) highand associated transportation of spent nuclear fuel (SNF) and high and associated transportation of spent nuclear fuel (SNF) highand associated transportation of spent nuclear fuel (SNF) and highand associated transportation of spent nuclear fuel (SNF) and high and associated transportation of spent nuclear fuel (SNF) high and associated transportation of spent nuclear fuel (SNF) high and associated transportation of spent nuclear fuel (SNF) high and associated transportation of spent nuclear fuel (SNF) high and associated transportation of spent nuclear fuel (SNF) high and associated transportation of spent nuclear fuel (SNF) high and associated transportation of spent nuclear fuel (SNF) highand associated transportation of spent nuclear fuel (SNF) and high and associated transportation of spent nuclear fuel (SNF) high and associated transportation of spent nuclear fuel (SNF) highand associated transportation of spent nuclear fuel (SNF)...« less

Thorium-based mixed oxide fuel in a pressurized water reactor: A feasibility analysis with MCNP

NASA Astrophysics Data System (ADS)

Tucker, Lucas Powelson

This dissertation investigates techniques for spent fuel monitoring, and assesses the feasibility of using a thorium-based mixed oxide fuel in a conventional pressurized water reactor for plutonium disposition. Both non-paralyzing and paralyzing dead-time calculations were performed for the Portable Spectroscopic Fast Neutron Probe (N-Probe), which can be used for spent fuel interrogation. Also, a Canberra 3He neutron detector's dead-time was estimated using a combination of subcritical assembly measurements and MCNP simulations. Next, a multitude of fission products were identified as candidates for burnup and spent fuel analysis of irradiated mixed oxide fuel. The best isotopes for these applications were identified by investigating half-life, photon energy, fission yield, branching ratios, production modes, thermal neutron absorption cross section and fuel matrix diffusivity. 132I and 97Nb were identified as good candidates for MOX fuel on-line burnup analysis. In the second, and most important, part of this work, the feasibility of utilizing ThMOX fuel in a pressurized water reactor (PWR) was first examined under steady-state, beginning of life conditions. Using a three-dimensional MCNP model of a Westinghouse-type 17x17 PWR, several fuel compositions and configurations of a one-third ThMOX core were compared to a 100% UO2 core. A blanket-type arrangement of 5.5 wt% PuO2 was determined to be the best candidate for further analysis. Next, the safety of the ThMOX configuration was evaluated through three cycles of burnup at several using the following metrics: axial and radial nuclear hot channel factors, moderator and fuel temperature coefficients, delayed neutron fraction, and shutdown margin. Additionally, the performance of the ThMOX configuration was assessed by tracking cycle length, plutonium destroyed, and fission product poison concentration.

Worldwide Environmental Compliance Assessment System (ECAS)

DTIC Science & Technology

1993-03-01

and other Pickling liquor and other corrosive alkalies corrosive acids Lime wastewater Spent acid Lime and water Spent mixed acid Spent caustic Spent ...labeling. packag- ing. and spill response for hazardous materials? 4. Does the installation store: * a. acids? b. caustics ? c. flammables? d. combustibles...USEPA Hazardous Waste Hazard Waste Code No. FOOl The following spent halokenated solvents used in degreasing: tetra- (T) chloroethylene, trichloroethylene

Effects of single caging and cage size on behavior and stress level of domestic neutered cats housed in an animal shelter.

PubMed

Uetake, Katsuji; Goto, Akihiro; Koyama, Rumi; Kikuchi, Rieko; Tanaka, Toshio

2013-03-01

Cats need a minimum amount of space even in animal shelters. In this study the effects of single caging and cage size on the behavior and stress level of domestic cats were investigated. Six neutered cats (2-15 years old) that had been housed in a group for at least 7 months were moved to three kinds of single cages (small, medium and large) by rotation on a Latin square design. They experienced each cage size for 6 days. Cats could use vertical dimensions when housed in a group room and the large cage. Behavioral observation was conducted for 3 h in the evening, and stress levels were assessed by urine cortisol-to-creatinine ratios. The amounts (estimated proportions) of time spent in locomotion and social/solitary play were lower even in large cages than in group housing (both P < 0.05). Conversely, the amount of time spent resting tended to increase when housed singly (P = 0.104). The urine cortisol-to-creatinine ratios of singly housed cats tended to be higher than that of group-housed cats (P = 0.086). The results indicate that cats become less active when they are housed singly in cages regardless of the cage size. Cats seem to feel no undue stress even in small cages if the stay is short. © 2012 The Authors. Animal Science Journal © 2012 Japanese Society of Animal Science.

Fourier mode analysis of slab-geometry transport iterations in spatially periodic media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larsen, E; Zika, M

1999-04-01

We describe a Fourier analysis of the diffusion-synthetic acceleration (DSA) and transport-synthetic acceleration (TSA) iteration schemes for a spatially periodic, but otherwise arbitrarily heterogeneous, medium. Both DSA and TSA converge more slowly in a heterogeneous medium than in a homogeneous medium composed of the volume-averaged scattering ratio. In the limit of a homogeneous medium, our heterogeneous analysis contains eigenvalues of multiplicity two at ''resonant'' wave numbers. In the presence of material heterogeneities, error modes corresponding to these resonant wave numbers are ''excited'' more than other error modes. For DSA and TSA, the iteration spectral radius may occur at these resonantmore » wave numbers, in which case the material heterogeneities most strongly affect iterative performance.« less

Web-Based Survey Application to Collect Contextually Relevant Geographic Data With Exposure Times: Application Development and Feasibility Testing

PubMed Central

Tobin, Karin; Rudolph, Jonathan; Latkin, Carl

2018-01-01

Background Although studies that characterize the risk environment by linking contextual factors with individual-level data have advanced infectious disease and substance use research, there are opportunities to refine how we define relevant neighborhood exposures; this can in turn reduce the potential for exposure misclassification. For example, for those who do not inject at home, injection risk behaviors may be more influenced by the environment where they inject than where they live. Similarly, among those who spend more time away from home, a measure that accounts for different neighborhood exposures by weighting each unique location proportional to the percentage of time spent there may be more correlated with health behaviors than one’s residential environment. Objective This study aimed to develop a Web-based application that interacts with Google Maps application program interfaces (APIs) to collect contextually relevant locations and the amount of time spent in each. Our analysis examined the extent of overlap across different location types and compared different approaches for classifying neighborhood exposure. Methods Between May 2014 and March 2017, 547 participants enrolled in a Baltimore HIV care and prevention study completed an interviewer-administered Web-based survey that collected information about where participants were recruited, worked, lived, socialized, injected drugs, and spent most of their time. For each location, participants gave an address or intersection which they confirmed using Google Map and Street views. Geographic coordinates (and hours spent in each location) were joined to neighborhood indicators by Community Statistical Area (CSA). We computed a weighted exposure based on the proportion of time spent in each unique location. We compared neighborhood exposures based on each of the different location types with one another and the weighted exposure using analysis of variance with Bonferroni corrections to account for multiple comparisons. Results Participants reported spending the most time at home, followed by the location where they injected drugs. Injection locations overlapped most frequently with locations where people reported socializing and living or sleeping. The least time was spent in the locations where participants reported earning money and being recruited for the study; these locations were also the least likely to overlap with other location types. We observed statistically significant differences in neighborhood exposures according to the approach used. Overall, people reported earning money in higher-income neighborhoods and being recruited for the study and injecting in neighborhoods with more violent crime, abandoned houses, and poverty. Conclusions This analysis revealed statistically significant differences in neighborhood exposures when defined by different locations or weighted based on exposure time. Future analyses are needed to determine which exposure measures are most strongly associated with health and risk behaviors and to explore whether associations between individual-level behaviors and neighborhood exposures are modified by exposure times. PMID:29351899

Behaviour: The net effect of green lifestyles

NASA Astrophysics Data System (ADS)

Hubacek, Klaus; Guan, Dabo

2011-08-01

It is often argued that saving energy helps the environment and saves money. An analysis of three energy-saving measures shows that decisions on how the saved money is spent affect the size of the environmental benefit.

Selective Acidic Leaching of Spent Zinc-Carbon Batteries Followed by Zinc Electrowinning

NASA Astrophysics Data System (ADS)

Shalchian, Hossein; Rafsanjani-Abbasi, Ali; Vahdati-Khaki, Jalil; Babakhani, Abolfazl

2015-02-01

In this work, a selective acidic leaching procedure was employed for recycling zinc from spent zinc-carbon batteries. Leaching experiments were carried out in order to maximize zinc recovery and minimize manganese recovery in diluted sulfuric acid media. Response surface methodology and analysis of variance were employed for experimental design, data analysis, and leaching optimization. The experimental design has 28 experiments that include 24 main runs and four replicate in center point. The optimal conditions obtained from the selective acidic leaching experiments, were sulfuric acid concentration of 1 pct v/v, leaching temperature of 343 K (70 °C), pulp density of 8 pct w/v, and stirring speed of 300 rpm. The results show that the zinc and manganese recoveries after staged selective leaching are about 92 and 15 pct, respectively. Finally, metallic zinc with purity of 99.9 pct and electrolytic manganese dioxide were obtained by electrowinning.

Recovery of zinc and manganese from alkaline and zinc-carbon spent batteries

NASA Astrophysics Data System (ADS)

De Michelis, I.; Ferella, F.; Karakaya, E.; Beolchini, F.; Vegliò, F.

This paper concerns the recovery of zinc and manganese from alkaline and zinc-carbon spent batteries. The metals were dissolved by a reductive-acid leaching with sulphuric acid in the presence of oxalic acid as reductant. Leaching tests were realised according to a full factorial design, then simple regression equations for Mn, Zn and Fe extraction were determined from the experimental data as a function of pulp density, sulphuric acid concentration, temperature and oxalic acid concentration. The main effects and interactions were investigated by the analysis of variance (ANOVA). This analysis evidenced the best operating conditions of the reductive acid leaching: 70% of manganese and 100% of zinc were extracted after 5 h, at 80 °C with 20% of pulp density, 1.8 M sulphuric acid concentration and 59.4 g L -1 of oxalic acid. Both manganese and zinc extraction yields higher than 96% were obtained by using two sequential leaching steps.

Suggestion on the safety classification of spent fuel dry storage in China’s pressurized water reactor nuclear power plant

NASA Astrophysics Data System (ADS)

Liu, Ting; Qu, Yunhuan; Meng, De; Zhang, Qiaoer; Lu, Xinhua

2018-01-01

China’s spent fuel storage in the pressurized water reactors(PWR) is stored with wet storage way. With the rapid development of nuclear power industry, China’s NPPs(NPPs) will not be able to meet the problem of the production of spent fuel. Currently the world’s major nuclear power countries use dry storage as a way of spent fuel storage, so in recent years, China study on additional spent fuel dry storage system mainly. Part of the PWR NPP is ready to apply for additional spent fuel dry storage system. It also need to safety classificate to spent fuel dry storage facilities in PWR, but there is no standard for safety classification of spent fuel dry storage facilities in China. Because the storage facilities of the spent fuel dry storage are not part of the NPP, the classification standard of China’s NPPs is not applicable. This paper proposes the safety classification suggestion of the spent fuel dry storage for China’s PWR NPP, through to the study on China’s safety classification principles of PWR NPP in “Classification for the items of pressurized water reactor nuclear power plants (GB/T 17569-2013)”, and safety classification about spent fuel dry storage system in NUREG/CR - 6407 in the United States.

Optical characterization of randomly microrough surfaces covered with very thin overlayers using effective medium approximation and Rayleigh-Rice theory

NASA Astrophysics Data System (ADS)

Ohlídal, Ivan; Vohánka, Jiří; Čermák, Martin; Franta, Daniel

2017-10-01

The modification of the effective medium approximation for randomly microrough surfaces covered by very thin overlayers based on inhomogeneous fictitious layers is formulated. The numerical analysis of this modification is performed using simulated ellipsometric data calculated using the Rayleigh-Rice theory. The system used to perform this numerical analysis consists of a randomly microrough silicon single crystal surface covered with a SiO2 overlayer. A comparison to the effective medium approximation based on homogeneous fictitious layers is carried out within this numerical analysis. For ellipsometry of the system mentioned above the possibilities and limitations of both the effective medium approximation approaches are discussed. The results obtained by means of the numerical analysis are confirmed by the ellipsometric characterization of two randomly microrough silicon single crystal substrates covered with native oxide overlayers. It is shown that the effective medium approximation approaches for this system exhibit strong deficiencies compared to the Rayleigh-Rice theory. The practical consequences implied by these results are presented. The results concerning the random microroughness are verified by means of measurements performed using atomic force microscopy.

Insulin and heparin-binding epidermal growth factor-like growth factor synergistically promote astrocyte survival and proliferation in serum-free medium.

PubMed

Jia, Mei; Shi, Zhongfang; Yan, Xu; Xu, Lixin; Dong, Liping; Li, Jiaxin; Wang, Yujiao; Yang, Shaohua; Yuan, Fang

2018-06-08

In vitro systems allowing maintenance and experimentation on primary astrocyte cultures have been used for decades. Astrocyte cultures are most maintained in serum-containing medium which has been found to alter the morphology and gene profiles of astrocytes. Here, we reported a new serum-free medium for astrocyte culture, which consisted of DMEM and NB media supplemented with insulin and heparin-binding epidermal growth factor-like growth factor (HB-EGF) (SF-I-H medium). Meanwhile FBS-containing (FBS) medium composed of DMEM medium containing 10% FBS were used for comparison study. Cerebral cortex was harvested from postnatal day 1 Wistar rats and brain cells were isolated and seeded to poly-L-lysine coated culture dishes after 15 min differential velocity adherence. Compared with FBS medium, astrocytes in SF-I-H medium are smaller and exhibited process bearing morphologies. MTT assays showed that cell density and proliferation rate were higher in SF-I-H medium than in FBS medium all the time, and flow cytometry analysis revealed that SF-I-H medium promoted cell mitosis in a manner comparable to FBS medium. Consistently, western blot analysis further revealed that insulin and HB-EGF synergistically activated the PI3K-AKT and MAPK-ERK1/2 signaling cascades as FBS. Astrocytes cultured in SF-I-H medium grow faster than FBS medium. Taken together, our results indicated that SF-I-H medium, in which cell morphology was similar with astrocytes in brain, was more effective for astrocyte survival and proliferation than FBS medium, providing a new cell model to study astrocyte functions without the interference of serum. Copyright © 2018. Published by Elsevier B.V.

Environmental Compliance Assessment Army Reserve (ECAAR)

DTIC Science & Technology

1993-09-01

and water Spent mixed acid Spent caustic Spent sulfuric acid Potential Consequences: Heat generation, violent reaction. Group 2-A Group 2-B Aluminum Any...methane reforming furnaces, pulping liquor recovery furnaces, combustion devices used in the recovery of sulfur values from spent sulfuric acid...Industry and USEPA Hazardous Waste Hazard No. Hazardous Waste Code* Generic FOO1 The spent halogenated solvents used in degreasing: Trichloroethylene, (t

Development of low cost medium for ethanol production from syngas by Clostridium ragsdalei.

PubMed

Gao, Jie; Atiyeh, Hasan K; Phillips, John R; Wilkins, Mark R; Huhnke, Raymond L

2013-11-01

The development of a low cost medium for ethanol production is critical for process feasibility. Ten media were formulated for Clostridium ragsdalei by reduction, elimination and replacement of expensive nutrients. Cost analysis and effects of medium components on growth and product formation were investigated. Fermentations were performed in 250 mL bottles using syngas (20% CO, 15% CO2, 5% H2 and 60% N2). The standard medium M1 cost is $9.83/L, of which 93% is attributed to morpholinoethane sulfonic acid (MES) buffer. Statistical analysis of the results showed that MES removal did not affect cell growth and ethanol production (P>0.05). Based on cells' elemental composition, a minimal mineral concentration medium M7 was formulated, which provided 29% higher ethanol yield from CO at 3% of the cost compared to medium M1. Ethanol yield from CO in the completely defined medium M9 was 36% higher than while at 5% the cost of medium M1. Copyright © 2013 Elsevier Ltd. All rights reserved.

Originality Detection Software in a Graduate Policy Course: A Mixed-Methods Evaluation of Plagiarism

ERIC Educational Resources Information Center

Dreuth Zeman, Laura; Steen, Julie A.; Metz Zeman, Natalie

2011-01-01

The authors used a mixed-methods approach to evaluate the use of Turnitin originality detection software in a graduate social work course. Qualitative analysis of student responses revealed positive and negative spent completing assignments, and the tone of the class. Quantitative analysis of students' originality scores indicated a short-term…

Undergraduate Work Placements: An Analysis of the Effects on Career Progression

ERIC Educational Resources Information Center

Brooks, Ruth; Youngson, Paul L.

2016-01-01

Combining work experience with degree-level study is seen as a key differentiator for securing employment upon graduation in a competitive employment market. The positive benefits of sandwich courses, where up to 12 months is spent working in industry, are widely acknowledged in academic literature though data analysis tends to focus on cohorts in…

CO2 Sequestration within Spent Oil Shale

NASA Astrophysics Data System (ADS)

Foster, H.; Worrall, F.; Gluyas, J.; Morgan, C.; Fraser, J.

2013-12-01

Worldwide deposits of oil shales are thought to represent ~3 trillion barrels of oil. Jordanian oil shale deposits are extensive and of high quality, and could represent 100 billion barrels of oil, leading to much interest and activity in the development of these deposits. The exploitation of oil shales has raised a number of environmental concerns including: land use, waste disposal, water consumption, and greenhouse gas emissions. The dry retorting of oil shales can overcome a number of the environmental impacts, but this leaves concerns over management of spent oil shale and CO2 production. In this study we propose that the spent oil shale can be used to sequester CO2 from the retorting process. Here we show that by conducting experiments using high pressure reaction facilities, we can achieve successful carbonation of spent oil shale. High pressure reactor facilities in the Department of Earth Sciences, Durham University, are capable of reacting solids with a range of fluids up to 15 MPa and 350°C, being specially designed for research with supercritical fluids. Jordanian spent oil shale was reacted with high pressure CO2 in order to assess whether there is potential for sequestration. Fresh and reacted materials were then examined by: Inductively Coupled Plasma Mass Spectrometry (ICP-MS), Thermogravimetric Analysis (TGA), X-Ray Fluorescence (XRF) and X-Ray Diffraction (XRD) methods. Jordanian spent oil shale was found to sequester up to 5.8 wt % CO2, on reacting under supercritical conditions, which is 90% of the theoretical carbonation. Jordanian spent oil shale is composed of a large proportion of CaCO3, which on retorting decomposes, forming CaSO4 and Ca-oxides which are the focus of carbonation reactions. A factorially designed experiment was used to test different factors on the extent of carbonation, including: pressure; temperature; duration; and the water content. Analysis of Variance (ANOVA) techniques were then used to determine the significance of each of these. Results show that the duration; temperature; pressure; and the interactions between these significantly affect the extent of carbonation. Reactions carried out for at least 4 hours show significantly more carbonation than those under supercritical conditions for 2 hours or less. However, reacting for 24 hours does not show a significant increase in the extent of reaction, indicating that the reaction has reached equilibrium within a few hours. Maximum carbonation occurred within 4 hours, at higher temperatures and pressures of 80°C and 100 bar although results also show that there is a significant amount of carbonation achieved within 30 minutes, at 40°C and 70 bar. The magnitude of the CO2 sequestration achieved was sufficient that it could lower CO2 emissions by up to 30 kg CO2 /bbl, thereby bringing the emissions from oil shale processing in line with those from conventional oil extraction methods. The determination of optimum conditions to allow for: maximum carbonation, oil recovery and sufficient calcination, is also of importance and is currently under investigation.

10 CFR 72.214 - List of approved spent fuel storage casks.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE General License for Storage of Spent Fuel at Power Reactor Sites § 72.214 List of approved spent...

10 CFR 72.214 - List of approved spent fuel storage casks.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE General License for Storage of Spent Fuel at Power Reactor Sites § 72.214 List of approved spent...

PWR and BWR spent fuel assembly gamma spectra measurements

NASA Astrophysics Data System (ADS)

Vaccaro, S.; Tobin, S. J.; Favalli, A.; Grogan, B.; Jansson, P.; Liljenfeldt, H.; Mozin, V.; Hu, J.; Schwalbach, P.; Sjöland, A.; Trellue, H.; Vo, D.

2016-10-01

A project to research the application of nondestructive assay (NDA) to spent fuel assemblies is underway. The research team comprises the European Atomic Energy Community (EURATOM), embodied by the European Commission, DG Energy, Directorate EURATOM Safeguards; the Swedish Nuclear Fuel and Waste Management Company (SKB); two universities; and several United States national laboratories. The Next Generation of Safeguards Initiative-Spent Fuel project team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: (1) verify the initial enrichment, burnup, and cooling time of facility declaration; (2) detect the diversion or replacement of pins, (3) estimate the plutonium mass, (4) estimate the decay heat, and (5) determine the reactivity of spent fuel assemblies. This study focuses on spectrally resolved gamma-ray measurements performed on a diverse set of 50 assemblies [25 pressurized water reactor (PWR) assemblies and 25 boiling water reactor (BWR) assemblies]; these same 50 assemblies will be measured with neutron-based NDA instruments and a full-length calorimeter. Given that encapsulation/repository and dry storage safeguards are the primarily intended applications, the analysis focused on the dominant gamma-ray lines of 137Cs, 154Eu, and 134Cs because these isotopes will be the primary gamma-ray emitters during the time frames of interest to these applications. This study addresses the impact on the measured passive gamma-ray signals due to the following factors: burnup, initial enrichment, cooling time, assembly type (eight different PWR and six different BWR fuel designs), presence of gadolinium rods, and anomalies in operating history. To compare the measured results with theory, a limited number of ORIGEN-ARP simulations were performed.

Adjusting health expenditure for military spending and interest payment: Israel and the OECD countries.

PubMed

Shmueli, Amir; Israeli, Avi

2013-02-20

Compared to OECD countries, Israel has a remarkably low percentage of GDP and of government expenditure spent on health, which are not reflected in worse national outcomes. Israel is also characterized by a relatively high share of GDP spent on security expenses and payment of public debt. To determine to what extent differences between Israel and the OECD countries in security expenses and payment of the public debt might account for the gaps in the percentage of GDP and of government expenditures spent on health. We compare the percentages of GDP and of government expenditures spent on health in the OECD countries with the respective percentages when using primary civilian GDP and government expenditures (i.e., when security expenses and interest payment are deducted). We compared Israel with the OECD average and examined the ranking of the OECD countries under the two measures over time. While as a percentage of GDP, the national expenditure on health in Israel was well below the average of the OECD countries, as a percentage of primary civilian GDP it was above the average until 2003 and below the average thereafter. When the OECD countries were ranked according to decreasing percent of GDP and of government expenditure spent on health, adjusting for security and debt payment expenditures changed the Israeli rank from 23rd to 17th and from 27th to 25th, respectively. Adjusting for security expenditures and interest payment, Israel's low spending on health as a percentage of GDP and as a percentage of government's spending increases and is closer to the OECD average. Further analysis should explore the effect of additional population and macroeconomic differences on the remaining gaps.

[Association between time spent on physical exercise, sleep, homework and suspected myopia among students].

PubMed

Xu, S J; Wan, Y H; Xu, Z H; Zhang, H; Xu, L; Wang, B; Tao, F B

2016-02-01

To investigate the prevalence of suspected myopia among students and to examine the relationship between time spent on physical exercise, sleep, homework and suspected myopia. A total of 8 030 primary and secondary school students from 4(th) to 12(th) grades were selected from the National Student Constitution and Health Survey (NSCHS) in Anhui province in 2014. Time spent on exercise, sleep and homework per day were collected using a self-administrated questionnaire. Visual acuity was examined using the Standard Logarithmic Visual Acuity Chart. The overall prevalence of suspected myopia was 69.03%. Prevalence rates of suspected myopia appeared higher in girls, in urban students, with the highest in the 16 to 18 year-old groups. RESULTS from the multiple logistic regression analysis showed that the amount of time spent on physical exercise, sleep and homework per day were all significantly associated with suspected myopia. Suspected myopia was associated with longer time on physical exercise among students aged 8 to 12 years (OR=0.80, 95%CI: 0.64-0.99), and longer sleep time among students in the age groups of 13 to 15 years and 16 to 18 years (OR=0.73, 95% CI: 0.56-0.94;OR=0.38, 95% CI: 0.21-0.68, respectively). Longer time spent on homework significantly increased the risk of suspected myopia among students in the age groups of 8 to 12 years and 13 to 15 years (OR=1.41, 95%CI: 1.11-1.79; OR=1.74, 95% CI: 1.36-2.23, respectively). Suspected myopia appeared common among students. Comprehensive intervention programs focusing on sufficient physical exercise and sleep but less homework might help to prevent myopia among students at different ages.

Adjusting health expenditure for military spending and interest payment: Israel and the OECD countries

PubMed Central

2013-01-01

Background Compared to OECD countries, Israel has a remarkably low percentage of GDP and of government expenditure spent on health, which are not reflected in worse national outcomes. Israel is also characterized by a relatively high share of GDP spent on security expenses and payment of public debt. Objectives To determine to what extent differences between Israel and the OECD countries in security expenses and payment of the public debt might account for the gaps in the percentage of GDP and of government expenditures spent on health. Methods We compare the percentages of GDP and of government expenditures spent on health in the OECD countries with the respective percentages when using primary civilian GDP and government expenditures (i.e., when security expenses and interest payment are deducted). We compared Israel with the OECD average and examined the ranking of the OECD countries under the two measures over time. Results While as a percentage of GDP, the national expenditure on health in Israel was well below the average of the OECD countries, as a percentage of primary civilian GDP it was above the average until 2003 and below the average thereafter. When the OECD countries were ranked according to decreasing percent of GDP and of government expenditure spent on health, adjusting for security and debt payment expenditures changed the Israeli rank from 23rd to 17th and from 27th to 25th, respectively. Conclusions Adjusting for security expenditures and interest payment, Israel's low spending on health as a percentage of GDP and as a percentage of government's spending increases and is closer to the OECD average. Further analysis should explore the effect of additional population and macroeconomic differences on the remaining gaps. PMID:23425013

Impact of a psychiatric unit's daily discharge rates on emergency department flow.

PubMed

Bastiampillai, Tarun; Schrader, Geoffrey; Dhillon, Rohan; Strobel, Jörg; Bidargaddi, Niranjan

2012-04-01

To investigate relationships between time spent in the emergency department (ED) in patients requiring admission to the psychiatric ward, the day of the week of presentation and the daily number of discharges from the psychiatric ward. Retrospective analysis of patient flow as a function of day of week, time of day (a.m., p.m.), number of patients requiring admission and number of ward discharges over a one-year period, for all mental health related presentations to the ED of the Queen Elizabeth Hospital in Adelaide, South Australia, before their admission to the psychiatric inpatient facility. The time spent by patients in the ED waiting for admission to the psychiatric ward was significantly greater on weekends. There were significantly fewer discharges from the psychiatric ward during weekends compared with weekdays. The average time spent by patients in the ED requiring admission to the psychiatric ward for those days when there were vacant beds was 17.9 hours (SD=14.5). More people presented to the ED with a psychiatric diagnosis in the afternoons. There was a significant inverse correlation between the time spent by patients in the ED requiring admission to the psychiatric ward per day and the number of discharges from the psychiatric ward per day. These findings demonstrate that patient flow is significantly slower on weekends because of fewer discharges from the ward, leading to longer times spent in the ED before ward transfer. Waiting times in the ED were very substantially greater than the proposed 4-hour target even when vacant beds were available, raising considerable doubt about that target being realistic for psychiatric patients.

PWR and BWR spent fuel assembly gamma spectra measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaccaro, S.; Tobin, Stephen J.; Favalli, Andrea

A project to research the application of nondestructive assay (NDA) to spent fuel assemblies is underway. The research team comprises the European Atomic Energy Community (EURATOM), embodied by the European Commission, DG Energy, Directorate EURATOM Safeguards; the Swedish Nuclear Fuel and Waste Management Company (SKB); two universities; and several United States national laboratories. The Next Generation of Safeguards Initiative–Spent Fuel project team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: (1) verify the initial enrichment, burnup, and cooling time of facility declaration; (2) detectmore » the diversion or replacement of pins, (3) estimate the plutonium mass, (4) estimate the decay heat, and (5) determine the reactivity of spent fuel assemblies. This study focuses on spectrally resolved gamma-ray measurements performed on a diverse set of 50 assemblies [25 pressurized water reactor (PWR) assemblies and 25 boiling water reactor (BWR) assemblies]; these same 50 assemblies will be measured with neutron-based NDA instruments and a full-length calorimeter. Given that encapsulation/repository and dry storage safeguards are the primarily intended applications, the analysis focused on the dominant gamma-ray lines of 137Cs, 154Eu, and 134Cs because these isotopes will be the primary gamma-ray emitters during the time frames of interest to these applications. This study addresses the impact on the measured passive gamma-ray signals due to the following factors: burnup, initial enrichment, cooling time, assembly type (eight different PWR and six different BWR fuel designs), presence of gadolinium rods, and anomalies in operating history. As a result, to compare the measured results with theory, a limited number of ORIGEN-ARP simulations were performed.« less

Strategic Methodologies in Public Health Cost Analyses.

PubMed

Whittington, Melanie; Atherly, Adam; VanRaemdonck, Lisa; Lampe, Sarah

The National Research Agenda for Public Health Services and Systems Research states the need for research to determine the cost of delivering public health services in order to assist the public health system in communicating financial needs to decision makers, partners, and health reform leaders. The objective of this analysis is to compare 2 cost estimation methodologies, public health manager estimates of employee time spent and activity logs completed by public health workers, to understand to what degree manager surveys could be used in lieu of more time-consuming and burdensome activity logs. Employees recorded their time spent on communicable disease surveillance for a 2-week period using an activity log. Managers then estimated time spent by each employee on a manager survey. Robust and ordinary least squares regression was used to measure the agreement between the time estimated by the manager and the time recorded by the employee. The 2 outcomes for this study included time recorded by the employee on the activity log and time estimated by the manager on the manager survey. This study was conducted in local health departments in Colorado. Forty-one Colorado local health departments (82%) agreed to participate. Seven of the 8 models showed that managers underestimate their employees' time, especially for activities on which an employee spent little time. Manager surveys can best estimate time for time-intensive activities, such as total time spent on a core service or broad public health activity, and yet are less precise when estimating discrete activities. When Public Health Services and Systems Research researchers and health departments are conducting studies to determine the cost of public health services, there are many situations in which managers can closely approximate the time required and produce a relatively precise approximation of cost without as much time investment by practitioners.

PWR and BWR spent fuel assembly gamma spectra measurements

DOE PAGES

Vaccaro, S.; Tobin, Stephen J.; Favalli, Andrea; ...

2016-07-17

A project to research the application of nondestructive assay (NDA) to spent fuel assemblies is underway. The research team comprises the European Atomic Energy Community (EURATOM), embodied by the European Commission, DG Energy, Directorate EURATOM Safeguards; the Swedish Nuclear Fuel and Waste Management Company (SKB); two universities; and several United States national laboratories. The Next Generation of Safeguards Initiative–Spent Fuel project team is working to achieve the following technical goals more easily and efficiently than in the past using nondestructive assay measurements of spent fuel assemblies: (1) verify the initial enrichment, burnup, and cooling time of facility declaration; (2) detectmore » the diversion or replacement of pins, (3) estimate the plutonium mass, (4) estimate the decay heat, and (5) determine the reactivity of spent fuel assemblies. This study focuses on spectrally resolved gamma-ray measurements performed on a diverse set of 50 assemblies [25 pressurized water reactor (PWR) assemblies and 25 boiling water reactor (BWR) assemblies]; these same 50 assemblies will be measured with neutron-based NDA instruments and a full-length calorimeter. Given that encapsulation/repository and dry storage safeguards are the primarily intended applications, the analysis focused on the dominant gamma-ray lines of 137Cs, 154Eu, and 134Cs because these isotopes will be the primary gamma-ray emitters during the time frames of interest to these applications. This study addresses the impact on the measured passive gamma-ray signals due to the following factors: burnup, initial enrichment, cooling time, assembly type (eight different PWR and six different BWR fuel designs), presence of gadolinium rods, and anomalies in operating history. As a result, to compare the measured results with theory, a limited number of ORIGEN-ARP simulations were performed.« less

Carotenoids of lettuce (Lactuca sativa L.) grown on soil enriched with spent coffee grounds.

PubMed

Cruz, Rebeca; Baptista, Paula; Cunha, Sara; Pereira, José Alberto; Casal, Susana

2012-02-07

The impact of spent coffee grounds on carotenoid and chlorophyll content in lettuce (Lactuca sativa L. var. capitata) was evaluated. A greenhouse pot experiment was conducted with spent coffee amounts ranging from 0% to 20% (v/v). All evaluated pigments increased proportionally to spent coffee amounts. Lutein and β-carotene levels increased up to 90% and 72%, respectively, while chlorophylls increased up to 61%. Biomass was also improved in the presence of 2.5% to 10% spent coffee, decreasing for higher amounts. Nevertheless, all plants were characterized by lower organic nitrogen content than the control ones, inversely to the spent coffee amounts, pointing to possible induced stress. Collected data suggests that plants nutritional features, with regards to these bioactive compounds, can be improved by the presence of low amounts of spent coffee grounds (up to 10%). This observation is particularly important because soil amendment with spent coffee grounds is becoming increasingly common within domestic agriculture. Still, further studies on the detailed influence of spent coffee bioactive compounds are mandatory, particularly regarding caffeine.

Behavior of Cackling Canada Geese during brood rearing

USGS Publications Warehouse

Fowler, Ada C.; Ely, Craig R.

1997-01-01

We studied behavior of Cackling Canada Goose (Branta canadensis minima, cacklers) broods between 1992 and 1996 on the Yukon Delta National Wildlife Refuge in western Alaska. An increase in time spent foraging by goslings during our study was weakly correlated with an increase in the size of the local breeding population. Amount of time spent feeding by adults and goslings increased throughout the brood rearing period. Overall, goslings spent more time feeding than either adult females or males, and adult males spent the most time alert. Time alert varied among brood rearing areas and increased with brood size, but there was no variation in time spent alert among years. Increases in feeding or alert behaviors were at a cost to time spent in all other behaviors. We suggest that there is not a simple trade-off between feeding and alert behavior in cacklers, but instead that time spent feeding and alert are optimized against all other behaviors. We suggest that forage quality and availability determines the amount of time spent feeding, whereas the threat of predation or disturbance determines the amount of time spent alert.

Solidification/stabilization of spent abrasives and use as nonstructural concrete

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brabrand, D.J.; Loehr, R.C.

1993-01-01

Tons of spent abrasives result each year from the removal of old paint from bridges. Because the spent abrasives contain metals from the paint, some spent abrasives may be considered hazardous by the Toxicity Characteristic (TC) criteria. Incorporation of the spent blasting abrasives in nonstructural concrete (rip-rap, dolphins) offers an opportunity to recycle the spent abrasives while immobilizing potentially leachable metals. This study focused on the Portland Cement Solidification/Stabilization (S/S) of spent blasting abrasives taken from a bridge located in Southeast Texas. The study examined (a) the cadmium, chromium, and lead concentrations in extracts obtained by using the Toxicity Characteristicmore » Leaching Procedure (TCLP) and (b) the compressive strengths of Portland Cement mixes that contained different amounts of the spent abrasives. Performance was measured by meeting the TC criteria as well as the requirements for compressive strength. Study results indicated that considerable quantities of these spent abrasives can be solidified/stabilized while reducing the leachability of cadmium, chromium, and lead and producing compressive strengths over 6,895 kN/m[sup 2] (1,000 psi).« less

Used fuel storage monitoring using novel 4He scintillation fast neutron detectors and neutron energy discrimination analysis

NASA Astrophysics Data System (ADS)

Kelley, Ryan P.

With an increasing quantity of spent nuclear fuel being stored at power plants across the United States, the demand exists for a new method of cask monitoring. Certifying these casks for transportation and long-term storage is a unique dilemma: their sealed nature lends added security, but at the cost of requiring non-invasive measurement techniques to verify their contents. This research will design and develop a new method of passively scanning spent fuel casks using 4He scintillation detectors to make this process more accurate. 4He detectors are a relatively new technological development whose full capabilities have not yet been exploited. These detectors take advantage of the high 4He cross section for elastic scattering at fast neutron energies, particularly the resonance around 1 MeV. If one of these elastic scattering interactions occurs within the detector, the 4He nucleus takes energy from the incident neutron, then de-excites by scintillation. Photomultiplier Tubes (PMTs) at either end of the detector tube convert this emitted light into an electrical signal. The goal of this research is to use the neutron spectroscopy features of 4He scintillation detectors to maintain accountability of spent fuel in storage. This project will support spent fuel safeguards and the detection of fissile material, in order to minimize the risk of nuclear proliferation and terrorism.

Nutrient conservation during spent mushroom compost application using spent mushroom substrate derived biochar.

PubMed

Lou, Zimo; Sun, Yue; Bian, Shuping; Ali Baig, Shams; Hu, Baolan; Xu, Xinhua

2017-02-01

Spent mushroom compost (SMC), a spent mushroom substrate (SMS) derived compost, is always applied to agriculture land to enhance soil organic matter and nutrient contents. However, nitrogen, phosphate and organic matter contained in SMC can leach out and contaminate ground water during its application. In this study, biochars prepared under different pyrolytic temperatures (550 °C, 650 °C or 750 °C) from SMS were applied to soil as a nutrient conservation strategy. The resultant biochars were characterized for physical and mineralogical properties. Surface area and pore volume of biochars increased as temperature increased, while pore size decreased with increasing temperature. Calcite and quartz were evidenced by X-ray diffraction analysis in all biochars produced. Results of column leaching test suggested that mixed treatment of SMC and SMS-750-800 (prepared with the temperature for pyrolysis and activation was chosen as 750 °C and 800 °C, respectively) could reduce 43% of TN and 66% of COD Cr in leachate as compared to chemical fertilizers and SMC, respectively. Furthermore, increasing dosage of SMS-750-800 from 1% to 5% would lead to 54% COD Cr reduction in leachate, which confirmed its nutrient retention capability. Findings from this study suggested that combined application of SMC and SMS-based biochar was an applicable strategy for reducing TN and COD Cr leaching. Copyright © 2016 Elsevier Ltd. All rights reserved.

[The work of medical doctors on psychiatric wards: an analysis of everyday activities].

PubMed

Putzhammer, A; Senft, I; Fleischmann, H; Klein, H E; Schmauss, M; Schreiber, W; Hajak, G

2006-03-01

In Germany, the economic situation of psychiatric hospitals has markedly changed during the last years. Whilst the number of patients has steadily increased, many clinics considerably reduced the number of therapeutic staff due to an increasing lack of financial support. The German psychiatry personnel regulations act defines the number of therapeutic staff required for an adequate psychiatric treatment, but the requirements of this regulations act nowadays are widely missed in most of the German psychiatric hospitals. This severely affects the therapeutic work on psychiatric wards. This study analyses tasks and activities of medical doctors on psychiatric wards and compares the hours spent with various types of activities with the amount of time that should be spent according to the personnel regulations act. Results show that doctors spend much more time with documentation and administrative work than originally intended by the personnel regulations act. They compensate this mainly by a reduction of time spent in direct contact with the patients. In this context, the number of psychotherapy sessions as well as sessions with the patients' relatives has been considerably reduced, whereas the time spent for emergency intervention and basic treatment still corresponds to the calculations according to the personnel regulations act. All in all, the results show that a reduction of therapeutic staff in psychiatric hospitals directly leads to a change in treatment settings with a focus on less individual treatment options.

Using an individualised consultation and activPAL™ feedback to reduce sedentary time in older Scottish adults: results of a feasibility and pilot study.

PubMed

Fitzsimons, Claire F; Kirk, Alison; Baker, Graham; Michie, Fraser; Kane, Catherine; Mutrie, Nanette

2013-11-01

Sedentary behaviours have been linked to poor health, independent of physical activity levels. The objective of this study was to explore an individualised intervention strategy aimed at reducing sedentary behaviours in older Scottish adults. This feasibility and pilot study was a pre-experimental (one group pretest-posttest) study design. Participants were enrolled into the study in January-March 2012 and data analysis was completed April-October 2012. The study was based in Glasgow, Scotland. Participants received an individualised consultation targeting sedentary behaviour incorporating feedback from an activPAL activity monitor. Outcome measures were objectively (activPAL) and subjectively measured (Sedentary Behaviour Questionnaire) sedentary time. Twenty four participants received the intervention. Objectively measured total time spent sitting/lying was reduced by 24 min/day (p=0.042), a reduction of 2.2%. Total time spent in stepping activities, such as walking increased by 13 min/day (p=0.044). Self-report data suggested participants achieved behaviour change by reducing time spent watching television and/or using motorised transport. Interventions to reduce sedentary behaviours in older people are urgently needed. The results of this feasibility and pilot study suggest a consultation approach may help individuals reduce time spent in sedentary behaviours. A larger, controlled trial is warranted with a diverse sample to increase generalisability. © 2013.

Preparation, characterization and antioxidant activity of polysaccharide from spent Lentinus edodes substrate.

PubMed

Zhu, Hongji; Tian, Li; Zhang, Lei; Bi, Jingxiu; Song, Qianqian; Yang, Hui; Qiao, Jianjun

2018-06-01

This study explored the potential of spent Lentinus edodes substrate, a by-product of mushroom industries causing environmental pollution, serving as materials to produce antioxidant polysaccharide. The extraction process of spent Lentinus edodes substrate polysaccharide (SLSP) was optimized and the effects of drying methods on chemical composition, morphological property and antioxidant activity were investigated. Results showed that freeze-dried SLSP (SLSP-F) exhibited the best quality in terms of the polysaccharide yield (13.00%) and antioxidant activity. The EC 50 values of SLSP-F on DPPH, ABTS and superoxide anion radicals was 0.051mg/mL, 0.379mg/mL, 0.719mg/mL, respectively, which was significantly lower than that of freeze-dried Lentinus edodes polysaccharide (LP-F). After purification by Sephadex G-150, the purified SLSP-F (PSP) has a molecular weight of 16.77kDa. Compared with LP-F, PSP has more reducing sugars and uronic acids in chemical composition and higher contents of xylose, glucose and galactose in monosaccharide composition. FT-IR and NMR spectroscopy analysis revealed that PSP has both α and β glycosidic bonds and massive acetyl groups, which is different from LP-F mainly composed of 1, 3 linked α-D-Manp residue with some acetyl groups. The findings provided a reliable approach for the development of antioxidant polysaccharide from spent Lentinus edodes substrate. Copyright © 2018 Elsevier B.V. All rights reserved.

Boric acid-enhanced embedding medium for cryomicrotomy.

PubMed

Lim, Jin Ik; Park, Hun-Kuk

2012-05-01

A polyvinyl alcohol (PVA)/polyethylene glycol (PEG)-based resin is commonly used as a cryoembedding medium for the histological analysis of frozen tissue sections. However, it is not easy to obtain sufficient numbers of satisfactory reproducible sections owing to the differences between the mechanical properties of the medium and embedded tissue and the low cohesive force of the medium. We describe a modified PVA-based cryoembedding medium, composed of PVA (10wt% and 15wt%) with the addition of boric acid (from 0 to 5wt%), that can improve the sectioning properties and efficiency of frozen tissue for histological analysis. The amount of load under the same compressive displacement as well as cohesive force increased with increasing boric acid and PVA contents. 15wt% PVA and 3wt% boric acid was determined as an optimal composition for cryoembedding material based on the sectioning efficiency measured by the numbers of unimpaired sectioned slices and the amount of load under the same compressive displacement test. On the basis of the results of routine hematoxylin and eosin staining of cryosections of tissue embedded in a medium with 3wt% boric acid and PVA, it was concluded that the modified PVA cryoembedding medium can improve the efficiency of cryosectioning for subsequent histological or histochemical analysis of various tissues. Copyright © 2011 Elsevier GmbH. All rights reserved.

Research and Analysis on the Localization of a 3-D Single Source in Lossy Medium Using Uniform Circular Array

PubMed Central

Xue, Bing; Qu, Xiaodong; Fang, Guangyou; Ji, Yicai

2017-01-01

In this paper, the methods and analysis for estimating the location of a three-dimensional (3-D) single source buried in lossy medium are presented with uniform circular array (UCA). The mathematical model of the signal in the lossy medium is proposed. Using information in the covariance matrix obtained by the sensors’ outputs, equations of the source location (azimuth angle, elevation angle, and range) are obtained. Then, the phase and amplitude of the covariance matrix function are used to process the source localization in the lossy medium. By analyzing the characteristics of the proposed methods and the multiple signal classification (MUSIC) method, the computational complexity and the valid scope of these methods are given. From the results, whether the loss is known or not, we can choose the best method for processing the issues (localization in lossless medium or lossy medium). PMID:28574467

SFCOMPO-2.0: An OECD NEA database of spent nuclear fuel isotopic assays, reactor design specifications, and operating data

DOE PAGES

Michel-Sendis, F.; Gauld, I.; Martinez, J. S.; ...

2017-08-02

SFCOMPO-2.0 is the new release of the Organisation for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) database of experimental assay measurements. These measurements are isotopic concentrations from destructive radiochemical analyses of spent nuclear fuel (SNF) samples. We supplement the measurements with design information for the fuel assembly and fuel rod from which each sample was taken, as well as with relevant information on operating conditions and characteristics of the host reactors. These data are necessary for modeling and simulation of the isotopic evolution of the fuel during irradiation. SFCOMPO-2.0 has been developed and is maintained by the OECDmore » NEA under the guidance of the Expert Group on Assay Data of Spent Nuclear Fuel (EGADSNF), which is part of the NEA Working Party on Nuclear Criticality Safety (WPNCS). Significant efforts aimed at establishing a thorough, reliable, publicly available resource for code validation and safety applications have led to the capture and standardization of experimental data from 750 SNF samples from more than 40 reactors. These efforts have resulted in the creation of the SFCOMPO-2.0 database, which is publicly available from the NEA Data Bank. Our paper describes the new database, and applications of SFCOMPO-2.0 for computer code validation, integral nuclear data benchmarking, and uncertainty analysis in nuclear waste package analysis are briefly illustrated.« less

SFCOMPO-2.0: An OECD NEA database of spent nuclear fuel isotopic assays, reactor design specifications, and operating data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michel-Sendis, F.; Gauld, I.; Martinez, J. S.

SFCOMPO-2.0 is the new release of the Organisation for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) database of experimental assay measurements. These measurements are isotopic concentrations from destructive radiochemical analyses of spent nuclear fuel (SNF) samples. We supplement the measurements with design information for the fuel assembly and fuel rod from which each sample was taken, as well as with relevant information on operating conditions and characteristics of the host reactors. These data are necessary for modeling and simulation of the isotopic evolution of the fuel during irradiation. SFCOMPO-2.0 has been developed and is maintained by the OECDmore » NEA under the guidance of the Expert Group on Assay Data of Spent Nuclear Fuel (EGADSNF), which is part of the NEA Working Party on Nuclear Criticality Safety (WPNCS). Significant efforts aimed at establishing a thorough, reliable, publicly available resource for code validation and safety applications have led to the capture and standardization of experimental data from 750 SNF samples from more than 40 reactors. These efforts have resulted in the creation of the SFCOMPO-2.0 database, which is publicly available from the NEA Data Bank. Our paper describes the new database, and applications of SFCOMPO-2.0 for computer code validation, integral nuclear data benchmarking, and uncertainty analysis in nuclear waste package analysis are briefly illustrated.« less

Utilization of the Differential Die-Away Self-Interrogation Technique for Characterization and Verification of Spent Nuclear Fuel

NASA Astrophysics Data System (ADS)

Trahan, Alexis Chanel

New nondestructive assay techniques are sought to better characterize spent nuclear fuel. One of the NDA instruments selected for possible deployment is differential die-away self-interrogation (DDSI). The proposed DDSI approach for spent fuel assembly assay utilizes primarily the spontaneous fission and (alpha, n) neutrons in the assemblies as an internal interrogating radiation source. The neutrons released in spontaneous fission or (alpha,n) reactions are thermalized in the surrounding water and induce fission in fissile isotopes, thereby creating a measurable signal from isotopes of interest that would be otherwise difficult to measure. The DDSI instrument employs neutron coincidence counting with 3He tubes and list-mode-based data acquisition to allow for production of Rossi-alpha distributions (RADs) in post-processing. The list-mode approach to data collection and subsequent construction of RADs has expanded the analytical possibilities, as will be demonstrated throughout this thesis. One of the primary advantages is that the measured signal in the form of a RAD can be analyzed in its entirety including determination of die-away times in different time domains. This capability led to the development of the early die-away method, a novel leakage multiplication determination method which is tested throughout the thesis on different sources in simulation space and fresh fuel experiments. The early die-away method is a robust, accurate, improved method of determining multiplication without the need for knowledge of the (alpha,n) source term. The DDSI technique and instrument are presented along with the many novel capabilities enabled by and discovered through RAD analysis. Among the new capabilities presented are the early die-away method, total plutonium content determination, and highly sensitive missing pin detection. Simulation of hundreds of different spent and fresh fuel assemblies were used to develop the analysis algorithms and the techniques were tested on a variety of spontaneous fission-driven fresh fuel assemblies at Los Alamos National Laboratory and the BeRP ball at the Nevada National Security Site. The development of the new, improved analysis and characterization methods with the DDSI instrument makes it a viable technique for implementation in a facility to meet material control and safeguards needs.

Physical and Physiological Characteristics of Various-Sided Games in Elite Women's Soccer.

PubMed

Mara, Jocelyn K; Thompson, Kevin G; Pumpa, Kate L

2016-10-01

To investigate the physical and physiological response to different formats of various-sided games. Eighteen elite women's soccer players wore 15-Hz global positioning system devices and heart-rate (HR) monitors during various-sided games (small, 4 vs 4 and 5 vs 5; medium, 6 vs 6 and 7 vs 7; large, 8 vs 8 and 9 vs 9). Players covered more relative sprinting distance during large-sided games than in small-sided (P < .001, d = 0.69) and medium-sided (P < .001, d = 0.54) games. In addition, a greater proportion of total acceleration efforts that had a commencement velocity <1 m/s were observed in small-sided games (44.7% ± 5.5%) than in large-sided games (36.7% ± 10.6%) (P = .018, d = 0.94). This was accompanied by a greater proportion of acceleration efforts with a final velocity equivalent to the sprint threshold in large-sided games (15.4% ± 7.7%) than in small-sided games (5.2% ± 2.5%) (P < .001, d = 1.78). The proportion of time spent in HR zone 4 (>85% maximum HR) was greater during small-sided games (69.8% ± 2.5%) than in medium- (62.1% ± 2.8%, d = 2.90) and large-sided games (54.9% ± 3.1%) (P < .001, d = 5.29). The results from this study demonstrate that coaches can use small-sided games as an aerobic conditioning stimulus and to develop players' explosiveness and repeat-sprint ability over short durations. Large-sided games can be used to maintain aerobic capacity and develop maximum speed over longer distances.

Biological pretreatment of rice straw with Streptomyces griseorubens JSD-1 and its optimized production of cellulase and xylanase for improved enzymatic saccharification efficiency.

PubMed

Zhang, Dan; Luo, Yanqing; Chu, Shaohua; Zhi, Yuee; Wang, Bin; Zhou, Pei

2016-08-17

Biological pretreatment of rice straw and production of reducing sugars by hydrolysis of bio-pretreated material with Streptomyces griseorubens JSD-1 was investigated. After 10 days of incubation, various chemical compositions of inoculated rice straw were degraded and used for further enzymatic hydrolysis studies. The production of cellulolytic enzyme by S. griseorubens JSD-1 favored the conversion of cellulose to reducing sugars. The culture medium for cellulolytic enzyme production by using agro-industrial wastes was optimized through response surface methodology. According to the response surface analysis, the concentrations of 11.13, 20.34, 4.61, and 2.85 g L(-1) for rice straw, wheat bran, peptone, and CaCO3, respectively, were found to be optimum for cellulase and xylanase production. Then the hydrolyzed spent Streptomyces cells were used as a nitrogen source and the maximum filter paper cellulase, carboxymethylcellulase, and xylanase activities of 25.79, 78.91, and 269.53 U mL(-1) were achieved. The crude cellulase produced by S. griseorubens JSD-1 was subsequently used for the hydrolysis of bio-pretreated rice straw, and the optimum saccharification efficiency of 88.13% was obtained, indicating that the crude enzyme might be used instead of commercial cellulase during a saccharification process. These results give a basis for further study of bioethanol production from agricultural cellulosic waste.

Generation of medium frequency electrotherapeutic signals

NASA Astrophysics Data System (ADS)

Płaza, Mirosław; Szcześniak, Zbigniew; Dudek, Jolanta

2017-08-01

In this paper, generation methods of sinusoidal medium frequency electrotherapeutic signals have been studied. Signals of this type are increasingly used in electrotherapy owing to the development of both physical medicine and engineering sciences. The article presents analysis and comparison of analogue and digital methods of generation therapeutic signals. Analysis presented in the paper attempts to answer the question which technique of medium frequency signal generation can be most broadly applied in electrotherapy methods.

Report on UQ and PCMM Analysis of Vacuum Drying for UFD S&T Gaps

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. Fluss

2015-08-31

This report discusses two phenomena that could affect the safety, licensing, transportation, storage, and disposition of the spent fuel storage casks and their contents (radial hydriding during drying and water retention after drying) associated with the drying of canisters for dry spent fuel storage. The report discusses modeling frameworks and evaluations that are, or have been, developed as a means to better understand these phenomena. Where applicable, the report also discusses data needs and procedures for monitoring or evaluating the condition of storage containers during and after drying. A recommendation for the manufacturing of a fully passivated fuel rod, resistantmore » to oxidation and hydriding is outlined.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwantes, Jon M.

Kelly Fitzgerald Kelly Fitzgerald assisted with laboratory testing for an ongoing R&D project known as Electrochemically Modulated Separation (EMS) for on-line rapid preseparations of actinides prior to mass spectrometry analysis. Ryne Burgess Ryne Burgess used SCALE 5.1 ORIGEN-ARP to predict isotope libraries for the Units 1, 2 and 3 reactors and Unit 4 spent fuel pool for comparing against measurements of environmental sampled collected at the site in order to identify the source terms of the accident. Comparison of the cesium 134/137 and cesium 136/137 ratios observed in environmental samples and ORIGEN-ARP predictions indicated that the Unit 4 Spent Fuelmore » Pool did not significantly contribute to radionuclide release during the Fukushima Daiichi accident.« less

Partial defect verification of spent fuel assemblies by PDET: Principle and field testing in Interim Spent fuel Storage Facility (CLAB) in Sweden

DOE PAGES

Ham, Y.; Kerr, P.; Sitaraman, S.; ...

2016-05-05

Here, the need for the development of a credible method and instrument for partial defect verification of spent fuel has been emphasized over a few decades in the safeguards communities as the diverted spent fuel pins can be the source of nuclear terrorism or devices. The need is increasingly more important and even urgent as many countries have started to transfer spent fuel to so called "difficult-to-access" areas such as dry storage casks, reprocessing or geological repositories. Partial defect verification is required by IAEA before spent fuel is placed into "difficult-to-access" areas. Earlier, Lawrence Livermore National Laboratory (LLNL) has reportedmore » the successful development of a new, credible partial defect verification method for pressurized water reactor (PWR) spent fuel assemblies without use of operator data, and further reported the validation experiments using commercial spent fuel assemblies with some missing fuel pins. The method was found to be robust as the method is relatively invariant to the characteristic variations of spent fuel assemblies such as initial fuel enrichment, cooling time, and burn-up. Since then, the PDET system has been designed and prototyped for 17×17 PWR spent fuel assemblies, complete with data acquisition software and acquisition electronics. In this paper, a summary description of the PDET development followed by results of the first successful field testing using the integrated PDET system and actual spent fuel assemblies performed in a commercial spent fuel storage site, known as Central Interim Spent fuel Storage Facility (CLAB) in Sweden will be presented. In addition to partial defect detection initial studies have determined that the tool can be used to verify the operator declared average burnup of the assembly as well as intra-assembly bunrup levels.« less

Partial Defect Verification of Spent Fuel Assemblies by PDET: Principle and Field Testing in Interim Spent Fuel Storage Facility (CLAB) in Sweden

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ham, Y.S.; Kerr, P.; Sitaraman, S.

The need for the development of a credible method and instrument for partial defect verification of spent fuel has been emphasized over a few decades in the safeguards communities as the diverted spent fuel pins can be the source of nuclear terrorism or devices. The need is increasingly more important and even urgent as many countries have started to transfer spent fuel to so called 'difficult-to-access' areas such as dry storage casks, reprocessing or geological repositories. Partial defect verification is required by IAEA before spent fuel is placed into 'difficult-to-access' areas. Earlier, Lawrence Livermore National Laboratory (LLNL) has reported themore » successful development of a new, credible partial defect verification method for pressurized water reactor (PWR) spent fuel assemblies without use of operator data, and further reported the validation experiments using commercial spent fuel assemblies with some missing fuel pins. The method was found to be robust as the method is relatively invariant to the characteristic variations of spent fuel assemblies such as initial fuel enrichment, cooling time, and burn-up. Since then, the PDET system has been designed and prototyped for 17x17 PWR spent fuel assemblies, complete with data acquisition software and acquisition electronics. In this paper, a summary description of the PDET development followed by results of the first successful field testing using the integrated PDET system and actual spent fuel assemblies performed in a commercial spent fuel storage site, known as Central Interim Spent fuel Storage Facility (CLAB) in Sweden will be presented. In addition to partial defect detection initial studies have determined that the tool can be used to verify the operator declared average burnup of the assembly as well as intra-assembly burnup levels. (authors)« less

Partial defect verification of spent fuel assemblies by PDET: Principle and field testing in Interim Spent fuel Storage Facility (CLAB) in Sweden

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ham, Y.; Kerr, P.; Sitaraman, S.

Here, the need for the development of a credible method and instrument for partial defect verification of spent fuel has been emphasized over a few decades in the safeguards communities as the diverted spent fuel pins can be the source of nuclear terrorism or devices. The need is increasingly more important and even urgent as many countries have started to transfer spent fuel to so called "difficult-to-access" areas such as dry storage casks, reprocessing or geological repositories. Partial defect verification is required by IAEA before spent fuel is placed into "difficult-to-access" areas. Earlier, Lawrence Livermore National Laboratory (LLNL) has reportedmore » the successful development of a new, credible partial defect verification method for pressurized water reactor (PWR) spent fuel assemblies without use of operator data, and further reported the validation experiments using commercial spent fuel assemblies with some missing fuel pins. The method was found to be robust as the method is relatively invariant to the characteristic variations of spent fuel assemblies such as initial fuel enrichment, cooling time, and burn-up. Since then, the PDET system has been designed and prototyped for 17×17 PWR spent fuel assemblies, complete with data acquisition software and acquisition electronics. In this paper, a summary description of the PDET development followed by results of the first successful field testing using the integrated PDET system and actual spent fuel assemblies performed in a commercial spent fuel storage site, known as Central Interim Spent fuel Storage Facility (CLAB) in Sweden will be presented. In addition to partial defect detection initial studies have determined that the tool can be used to verify the operator declared average burnup of the assembly as well as intra-assembly bunrup levels.« less

Valorization of spent coffee grounds recycling as a potential alternative fuel resource in Turkey: An experimental study.

PubMed

Atabani, A E; Mercimek, S M; Arvindnarayan, Sundaram; Shobana, Sutha; Kumar, Gopalakrishnan; Cadir, Mehmet; Al-Muhatseb, Ala'a H

2018-03-01

In this study, recycling of spent coffee grounds (SCG) as a potential feedstock for alternative fuel production and compounds of added value in Turkey was assessed. The average oil content was found (≈ 13% w/w). All samples (before and after extraction) were tested for scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), calorific value, surface analysis and porosity, Fourier transform infrared (FT-IR), and elemental analysis to assess their potential towards fuel properties. Elemental analysis indicated that carbon represents the highest percentages (49.59% and 46.42%, respectively), followed by nitrogen (16.7% and 15.5%), hydrogen (6.74% and 6.04%), and sulfur (0.851% and 0.561%). These results indicate that SCG can be utilized as compost, as it is rich in nitrogen. Properties of the extracted oil were examined, followed by biodiesel production. The quality of biodiesel was compared with American Society for Testing and Materials (ASTM) D6751 standards, and all the properties complied with standard specifications. The fatty acid compositions were analyzed by gas chromatography. It was observed that coffee waste methyl ester (CWME) is mainly composed of palmitic (35.8%) and arachidic (44.6%) acids, which are saturated fatty acids. The low degree of unsaturation provides an excellent oxidation stability (10.4 hr). CWME has also excellent cetane number, higher heating value, and iodine value with poor cold flow properties. The studies also investigated blending of biodiesel with Euro diesel and butanol. Following this, a remarkable improvement in cloud and pour points of biodiesel was obtained. Spent coffee grounds after oil extraction is an ideal material for garden fertilizer, feedstock for ethanol, biogas production, and as fuel pellets. The outcome of such research work produces valuable insights on the recycling importance of SCG in Turkey. Coffee is a huge industry, and coffee has been widely used due to its refreshing properties. This industry generates large quantities of waste. Therefore, recycling of spent coffee grounds for producing alternative fuels and compounds of added value is crucial. Elemental analysis indicated that coffee waste can be utilized as compost, as it is rich in nitrogen. Coffee waste after oil extraction is an ideal feedstock for ethanol and biogas production, garden fertilizer, and as fuel pellets. The low degree of unsaturation provides excellent oxidation stability. Its biodiesel has also excellent cetane number, higher heating value, and lower iodine value.

Scale-4 Analysis of Pressurized Water Reactor Critical Configurations: Volume 2-Sequoyah Unit 2 Cycle 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowman, S.M.

1995-01-01

The requirements of ANSI/ANS 8.1 specify that calculational methods for away-from-reactor criticality safety analyses be validated against experimental measurements. If credit for the negative reactivity of the depleted (or spent) fuel isotopics is desired, it is necessary to benchmark computational methods against spent fuel critical configurations. This report summarizes a portion of the ongoing effort to benchmark away-from-reactor criticality analysis methods using critical configurations from commercial pressurized-water reactors. The analysis methodology selected for all the calculations reported herein is based on the codes and data provided in the SCALE-4 code system. The isotopic densities for the spent fuel assemblies inmore » the critical configurations were calculated using the SAS2H analytical sequence of the SCALE-4 system. The sources of data and the procedures for deriving SAS2H input parameters are described in detail. The SNIKR code module was used to extract the necessary isotopic densities from the SAS2H results and provide the data in the format required by the SCALE criticality analysis modules. The CSASN analytical sequence in SCALE-4 was used to perform resonance processing of the cross sections. The KENO V.a module of SCALE-4 was used to calculate the effective multiplication factor (k{sub eff}) of each case. The SCALE-4 27-group burnup library containing ENDF/B-IV (actinides) and ENDF/B-V (fission products) data was used for all the calculations. This volume of the report documents the SCALE system analysis of three reactor critical configurations for the Sequoyah Unit 2 Cycle 3. This unit and cycle were chosen because of the relevance in spent fuel benchmark applications: (1) the unit had a significantly long downtime of 2.7 years during the middle of cycle (MOC) 3, and (2) the core consisted entirely of burned fuel at the MOC restart. The first benchmark critical calculation was the MOC restart at hot, full-power (HFP) critical conditions. The other two benchmark critical calculations were the beginning-of-cycle (BOC) startup at both hot, zero-power (HZP) and HFP critical conditions. These latter calculations were used to check for consistency in the calculated results for different burnups and downtimes. The k{sub eff} results were in the range of 1.00014 to 1.00259 with a standard deviation of less than 0.001.« less

Activated carbon derived from waste coffee grounds for stable methane storage.

PubMed

Kemp, K Christian; Baek, Seung Bin; Lee, Wang-Geun; Meyyappan, M; Kim, Kwang S

2015-09-25

An activated carbon material derived from waste coffee grounds is shown to be an effective and stable medium for methane storage. The sample activated at 900 °C displays a surface area of 1040.3 m(2) g(-1) and a micropore volume of 0.574 cm(3) g(-1) and exhibits a stable CH4 adsorption capacity of ∼4.2 mmol g(-1) at 3.0 MPa and a temperature range of 298 ± 10 K. The same material exhibits an impressive hydrogen storage capacity of 1.75 wt% as well at 77 K and 100 kPa. Here, we also propose a mechanism for the formation of activated carbon from spent coffee grounds. At low temperatures, the material has two distinct types with low and high surface areas; however, activation at elevated temperatures drives off the low surface area carbon, leaving behind the porous high surface area activated carbon.

Activated carbon derived from waste coffee grounds for stable methane storage

NASA Astrophysics Data System (ADS)

Kemp, K. Christian; Baek, Seung Bin; Lee, Wang-Geun; Meyyappan, M.; Kim, Kwang S.

2015-09-01

An activated carbon material derived from waste coffee grounds is shown to be an effective and stable medium for methane storage. The sample activated at 900 °C displays a surface area of 1040.3 m2 g-1 and a micropore volume of 0.574 cm3 g-1 and exhibits a stable CH4 adsorption capacity of ˜4.2 mmol g-1 at 3.0 MPa and a temperature range of 298 ± 10 K. The same material exhibits an impressive hydrogen storage capacity of 1.75 wt% as well at 77 K and 100 kPa. Here, we also propose a mechanism for the formation of activated carbon from spent coffee grounds. At low temperatures, the material has two distinct types with low and high surface areas; however, activation at elevated temperatures drives off the low surface area carbon, leaving behind the porous high surface area activated carbon.

First-principles calculations of the thermodynamic properties of transuranium elements in a molten salt medium

NASA Astrophysics Data System (ADS)

Noh, Seunghyo; Kwak, Dohyun; Lee, Juseung; Kang, Joonhee; Han, Byungchan

2014-03-01

We utilized first-principles density-functional-theory (DFT) calculations to evaluate the thermodynamic feasibility of a pyroprocessing methodology for reducing the volume of high-level radioactive materials and recycling spent nuclear fuels. The thermodynamic properties of transuranium elements (Pu, Np and Cm) were obtained in electrochemical equilibrium with a LiCl-KCl molten salt as ionic phases and as adsorbates on a W(110) surface. To accomplish the goal, we rigorously calculated the double layer interface structures on an atomic resolution, on the thermodynamically most stable configurations on W(110) surfaces and the chemical activities of the transuranium elements for various coverages of those elements. Our results indicated that the electrodeposition process was very sensitive to the atomic level structures of Cl ions at the double-layer interface. Our studies are easily expandable to general electrochemical applications involving strong redox reactions of transition metals in non-aqueous solutions.

Hatch leading into U.S. Laboratory / Destiny module

NASA Image and Video Library

2001-02-11

STS98-E-5114 (11 February 2001) --- This medium close-up shot, photographed with a digital still camera, shows Unity's closed hatch to the newly delivered Destiny laboratory. The crews of Atlantis and the International Space Station opened the laboratory, shortly after this photo was made on Feb. 11, and the astronauts and cosmonauts spent the first full day of what are planned to be years of work ahead inside the orbiting science and command center. Station commander William M. (Bill) Shepherd opened the Destiny hatch, and he and shuttle commander Kenneth D. Cockrell ventured inside at 8:38 a.m. (CST), Feb. 11. As depicted in subsequent digital images in this series, members of both crews went to work quickly inside the new module, activating air systems, fire extinguishers, alarm systems, computers and internal communications. The crew also continued equipment transfers from the shuttle to the station.

Response surface methodology for optimization of medium for decolorization of textile dye Direct Black 22 by a novel bacterial consortium.

PubMed

Mohana, Sarayu; Shrivastava, Shalini; Divecha, Jyoti; Madamwar, Datta

2008-02-01

Decolorization and degradation of polyazo dye Direct Black 22 was carried out by distillery spent wash degrading mixed bacterial consortium, DMC. Response surface methodology (RSM) involving a central composite design (CCD) in four factors was successfully employed for the study and optimization of decolorization process. The hyper activities and interactions between glucose concentration, yeast extract concentration, dye concentration and inoculum size on dye decolorization were investigated and modeled. Under optimized conditions the bacterial consortium was able to decolorize the dye almost completely (>91%) within 12h. Bacterial consortium was able to decolorize 10 different azo dyes. The optimum combination of the four variables predicted through RSM was confirmed through confirmatory experiments and hence this bacterial consortium holds potential for the treatment of industrial waste water. Dye degradation products obtained during the course of decolorization were analyzed by HPTLC.

Soil sedimentology at Gusev Crater from Columbia Memorial Station to Winter Haven

USGS Publications Warehouse

Cabrol, N.A.; Herkenhoff, K. E.; Greeley, R.; Grin, E.A.; Schroder, C.; d'Uston, C.; Weitz, C.; Yingst, R.A.; Cohen, B. A.; Moore, J.; Knudson, A.; Franklin, B.; Anderson, R.C.; Li, R.

2008-01-01

A total of 3140 individual particles were examined in 31 soils along Spirit's traverse. Their size, shape, and texture were quantified and classified. They represent a unique record of 3 years of sedimentologic exploration from landing to sol 1085 covering the Plains Unit to Winter Haven where Spirit spent the Martian winter of 2006. Samples in the Plains Unit and Columbia Hills appear as reflecting contrasting textural domains. One is heterogeneous, with a continuum of angular-to-round particles of fine sand to pebble sizes that are generally dust covered and locally cemented in place. The second shows the effect of a dominant and ongoing dynamic aeolian process that redistributes a uniform population of medium-size sand. The texture of particles observed in the samples at Gusev Crater results from volcanic, aeolian, impact, and water-related processes. Copyright 2008 by the American Geophysical Union.

Fiber optic Cerenkov radiation sensor system to estimate burn-up of spent fuel: characteristic evaluation of the system using Co-60 source

NASA Astrophysics Data System (ADS)

Shin, S. H.; Jang, K. W.; Jeon, D.; Hong, S.; Kim, S. G.; Sim, H. I.; Yoo, W. J.; Park, B. G.; Lee, B.

2013-09-01

Cerenkov radiation occurs when charged particles are moving faster than the speed of light in a transparent dielectric medium. In optical fibers, the Cerenkov light also can be generated due to their dielectric components. Accordingly, the radiation-induced light signals can be obtained using optical fibers without any scintillating material. In this study, to measure the intensities of Cerenkov radiation induced by gamma-rays, we have fabricated the fiber-optic Cerenkov radiation sensor system using silica optical fibers, plastic optical fibers, multi-anode photomultiplier tubes, and a scanning system. To characterize the Cerenkov radiation generated in optical fibers, the spectra of Cerenkov radiation generated in the silica and plastic optical fibers were measured. Also, the intensities of Cerenkov radiation induced by gamma-rays generated from a cylindrical Co-60 source with or without lead shielding were measured using the fiberoptic Cerenkov radiation sensor system.

A study of the compatibility of an existing CFD package with a broader class of material constitutions

NASA Technical Reports Server (NTRS)

French, K. W., Jr.

1985-01-01

The flexibility of the PHOENICS computational fluid dynamics package was assessed along two general avenues; parallel modeling and analog modeling. In parallel modeling the dependent and independent variables retain their identity within some scaling factors, even though the boundary conditions and especially the constitutive relations do not correspond to any realistic fluid dynamic situation. PHOENICS was used to generate a CFD model that should exhibit the physical anomalies of a granular medium and permit reasonable similarity with boundary conditions typical to membrane or porous piston loading. A considerable portion of the study was spent prying into the existing code with a prejudice toward rate type and disarming any inherent fluid behavior. The final stages of the study were directed at the more specific problem of multiaxis loading of cylindrical geometry with a concern for the appearance of bulging, cross slab shear failure modes.

Cosmic Ray Modulation in the Outer Heliosphere During the Minimum of Solar Cycle 23/24

NASA Technical Reports Server (NTRS)

Adams, James H., Jr.; Florinski, V.; Washimi, H.; Pogorelov, N. V.

2011-01-01

We report a next generation model of galactic cosmic ray (GCR) transport in the three dimensional heliosphere. Our model is based on an accurate three-dimensional representation of the heliospheric interface. This representation is obtained by taking into account the interaction between partially ionized, magnetized plasma flows of the solar wind and the local interstellar medium. Our model reveals that after entering the heliosphere GCRs are stored in the heliosheath for several years. The preferred GCR entry locations are near the nose of the heliopause and at high latitudes. Low-energy (hundreds of MeV) galactic ions observed in the heliosheath have spent, on average, a longer time in the solar wind than those observed in the inner heliosphere, which would explain their cooled-off spectra at these energies. We also discuss radial gradients in the heliosheath and the implications for future Voyager observations.

Multifractality of laser beam spatial intensity in a turbulent medium

NASA Astrophysics Data System (ADS)

Barille, Régis; Lapenna, Paolo

2006-05-01

We present the results of a laser beam passing through a turbulent medium. First we measure the geometric parameters and the spatial coherence of the beam as a function of wind velocities. A multifractal detrended fluctuation analysis algorithm is applied to determine the multifractal scaling behavior of the intensity patterns. The measurements are fitted with models used in the analysis of river runoff records. We show the surprising result that the multifractality decreases when the spatial coherence of the laser is decreased. Universal scaling properties could be applied to the spatial characterization of a laser propagating in a turbulent medium or random medium.

Daily time spent indoors in German homes--baseline data for the assessment of indoor exposure of German occupants.

PubMed

Brasche, Sabine; Bischof, Wolfgang

2005-01-01

Comprehensive time-activity studies, for use as a basis for estimates of personal exposure, are not readily available in Germany. This analysis of time spent indoors at home is based on data from "Dampness and mould in homes" (2000/ 2001)--a study of about 12,000 persons living in 5530 randomly selected apartments and houses in Germany. The results show the mean times per day people in Germany spend in their homes, classified by gender, age group, building location, city size, region, building type, owner-occupier status, number of people at home, smoking and ventilation habits, moisture emission and ill health factors such as asthma, allergy and number of acute respiratory infections per year. The overall mean time spent at home, 15.7 h per, is in accordance with results from US-American (15.6 h/day) and Canadian (15.8 h/day) human activity surveys carried out in the nineties, as well as being consistent with the German Environmental Survey (1990/92) and a small German study in 1987.

Local negotiation on compensation siting of the spent nuclear fuel repository in Finland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kojo, Matti

The aim of the paper is to analyse the local negotiation process between the Municipality of Eurajoki and the nuclear power company Teollisuuden Voima (TVO) and the nuclear waste management company Posiva Oy. The aim of the negotiations was to find an acceptable form of compensation for siting a spent nuclear fuel repository in Olkiluoto, Finland. The paper includes background information on the siting process in Finland, the local political setting in the Municipality of Eurajoki and a description of the negotiation process. The analysis of the negotiations on compensation is important for better understanding the progress of the Finnishmore » siting process. The paper describes the picture of the contest to host the spent nuclear fuel repository. It also provides more information on the relationship between the Municipality of Eurajoki and the power company TVO. The negotiations on compensation and the roles of various players in the negotiations have not been studied in detail because the minutes of the Vuojoki liaison group were not available before the decision of the Supreme Administrative Court in May 2006. (author)« less

Leaching lithium from the anode electrode materials of spent lithium-ion batteries by hydrochloric acid (HCl).

PubMed

Guo, Yang; Li, Feng; Zhu, Haochen; Li, Guangming; Huang, Juwen; He, Wenzhi

2016-05-01

Spent lithium-ion batteries (LIBs) are considered as an important secondary resource for its high contents of valuable components, such as lithium and cobalt. Currently, studies mainly focus on the recycling of cathode electrodes. There are few studies concentrating on the recovery of anode electrodes. In this work, based on the analysis result of high amount of lithium contained in the anode electrode, the acid leaching process was applied to recycle lithium from anode electrodes of spent LIBs. Hydrochloric acid was introduced as leaching reagent, and hydrogen peroxide as reducing agent. Within the range of experiment performed, hydrogen peroxide was found to have little effect on lithium leaching process. The highest leaching recovery of 99.4wt% Li was obtained at leaching temperature of 80°C, 3M hydrochloric acid and S/L ratio of 1:50g/ml for 90min. The graphite configuration with a better crystal structure obtained after the leaching process can also be recycled. Copyright © 2015 Elsevier Ltd. All rights reserved.

Attrition Resistant Fischer-Tropsch Catalysts Based on FCC Supports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adeyiga, Adeyinka

2010-02-05

Commercial spent fluid catalytic cracking (FCC) catalysts provided by Engelhard and Albemarle were used as supports for Fe-based catalysts with the goal of improving the attrition resistance of typical F-T catalysts. Catalysts with the Ruhrchemie composition (100 Fe/5 Cu/4.2 K/25 spent FCC on mass basis) were prepared by wet impregnation. XRD and XANES analysis showed the presence of Fe{sub 2}O{sub 3} in calcined catalysts. FeC{sub x} and Fe{sub 3}O{sub 4} were present in the activated catalysts. The metal composition of the catalysts was analyzed by ICP-MS. F-T activity of the catalysts activated in situ in CO at the same conditionsmore » as used prior to the attrition tests was measured using a fixed bed reactor at T = 573 K, P = 1.38 MPa and H{sub 2}:CO ratio of 0.67. Cu and K promoted Fe supported over Engelhard provided spent FCC catalyst shows relatively good attrition resistance (8.2 wt% fines lost), high CO conversion (81%) and C{sub 5}+ hydrocarbons selectivity (18.3%).« less

Gender differences in social support and leisure-time physical activity.

PubMed

Oliveira, Aldair J; Lopes, Claudia S; Rostila, Mikael; Werneck, Guilherme Loureiro; Griep, Rosane Härter; Leon, Antônio Carlos Monteiro Ponce de; Faerstein, Eduardo

2014-08-01

To identify gender differences in social support dimensions' effect on adults' leisure-time physical activity maintenance, type, and time. Longitudinal study of 1,278 non-faculty public employees at a university in Rio de Janeiro, RJ, Southeastern Brazil. Physical activity was evaluated using a dichotomous question with a two-week reference period, and further questions concerning leisure-time physical activity type (individual or group) and time spent on the activity. Social support was measured with the Medical Outcomes Study Social Support Scale. For the analysis, logistic regression models were adjusted separately by gender. A multinomial logistic regression showed an association between material support and individual activities among women (OR = 2.76; 95%CI 1.2;6.5). Affective support was associated with time spent on leisure-time physical activity only among men (OR = 1.80; 95%CI 1.1;3.2). All dimensions of social support that were examined influenced either the type of, or the time spent on, leisure-time physical activity. In some social support dimensions, the associations detected varied by gender. Future studies should attempt to elucidate the mechanisms involved in these gender differences.

Free Vibration Response Comparison of Composite Beams with Fluid Structure Interaction

DTIC Science & Technology

2012-09-01

fluid damping to vibrating structures when in contact with a fluid medium such as water . The added mass effect changes the dynamic responses of the...200 words) The analysis of the dynamic response of a vibrating structure in contact with a fluid medium can be interpreted as an added mass effect...INTENTIONALLY LEFT BLANK v ABSTRACT The analysis of the dynamic response of a vibrating structure in contact with a fluid medium can be interpreted as

Error Pattern Analysis Applied to Technical Writing: An Editor's Guide for Writers.

ERIC Educational Resources Information Center

Monagle, E. Brette

The use of error pattern analysis can reduce the time and money spent on editing and correcting manuscripts. What is required is noting, classifying, and keeping a frequency count of errors. First an editor should take a typical page of writing and circle each error. After the editor has done a sufficiently large number of pages to identify an…

Multi-Detector Analysis System for Spent Nuclear Fuel Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reber, Edward Lawrence; Aryaeinejad, Rahmat; Cole, Jerald Donald

1999-09-01

The Spent Nuclear Fuel (SNF) Non-Destructive Analysis (NDA) program at INEEL is developing a system to characterize SNF for fissile mass, radiation source term, and fissile isotopic content. The system is based on the integration of the Fission Assay Tomography System (FATS) and the Gamma-Neutron Analysis Technique (GNAT) developed under programs supported by the DOE Office of Non-proliferation and National Security. Both FATS and GNAT were developed as separate systems to provide information on the location of special nuclear material in weapons configuration (FATS role), and to measure isotopic ratios of fissile material to determine if the material was frommore » a weapon (GNAT role). FATS is capable of not only determining the presence and location of fissile material but also the quantity of fissile material present to within 50%. GNAT determines the ratios of the fissile and fissionable material by coincidence methods that allow the two prompt (immediately) produced fission fragments to be identified. Therefore, from the combination of FATS and GNAT, MDAS is able to measure the fissile material, radiation source term, and fissile isotopics content.« less

5 CFR 551.425 - Time spent receiving medical attention.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Time spent receiving medical attention... Relation to Other Activities § 551.425 Time spent receiving medical attention. (a) Time spent waiting for and receiving medical attention for illness or injury shall be considered hours of work if: (1) The...

78 FR 56775 - Waste Confidence-Continued Storage of Spent Nuclear Fuel

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-13

... radiological impacts of spent nuclear fuel and high-level waste disposal. DATES: Submit comments on the... determination. The ``Offsite radiological impacts of spent nuclear fuel and high-level waste disposal'' issue.... Geologic Repository--Technical Feasibility and Availability C3. Storage of Spent Nuclear Fuel C3.a...

78 FR 66858 - Waste Confidence-Continued Storage of Spent Nuclear Fuel

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

...-2012-0246] RIN 3150-AJ20 Waste Confidence--Continued Storage of Spent Nuclear Fuel AGENCY: Nuclear... its generic determination on the environmental impacts of the continued storage of spent nuclear fuel... revising the generic determination of the environmental impacts of the continued storage of spent nuclear...

5 CFR 551.425 - Time spent receiving medical attention.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Time spent receiving medical attention... REGULATIONS PAY ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Hours of Work Application of Principles in Relation to Other Activities § 551.425 Time spent receiving medical attention. (a) Time spent waiting for...

5 CFR 551.425 - Time spent receiving medical attention.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false Time spent receiving medical attention... REGULATIONS PAY ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Hours of Work Application of Principles in Relation to Other Activities § 551.425 Time spent receiving medical attention. (a) Time spent waiting for...

5 CFR 551.425 - Time spent receiving medical attention.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Time spent receiving medical attention... REGULATIONS PAY ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Hours of Work Application of Principles in Relation to Other Activities § 551.425 Time spent receiving medical attention. (a) Time spent waiting for...

5 CFR 551.425 - Time spent receiving medical attention.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Time spent receiving medical attention... REGULATIONS PAY ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Hours of Work Application of Principles in Relation to Other Activities § 551.425 Time spent receiving medical attention. (a) Time spent waiting for...

U.S. sent fuel shipment experience by rail

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colborn, K.

2007-07-01

As planning for the large scale shipment of spent nuclear fuel to Yucca Mountain proceeds to address these challenges, actual shipments of spent fuel in other venues continues to provide proof that domestic rail spent fuel shipments can proceed safely and effectively. This paper presents some examples of recently completed spent fuel shipments, and the shipment of large low-level radioactive waste shipments offering lessons learned that may be beneficial to the planning process for large scale spent fuel shipments in the US. (authors)

Body mass index: accounting for full time sedentary occupation and 24-hr self-reported time use.

PubMed

Tudor-Locke, Catrine; Schuna, John M; Katzmarzyk, Peter T; Liu, Wei; Hamrick, Karen S; Johnson, William D

2014-01-01

We used linked existing data from the 2006-2008 American Time Use Survey (ATUS), the Current Population Survey (CPS, a federal survey that provides on-going U.S. vital statistics, including employment rates) and self-reported body mass index (BMI) to answer: How does BMI vary across full time occupations dichotomized as sedentary/non-sedentary, accounting for time spent in sleep, other sedentary behaviors, and light, moderate, and vigorous intensity activities? We classified time spent engaged at a primary job (sedentary or non-sedentary), sleep, and other non-work, non-sleep intensity-defined behaviors, specifically, sedentary behavior, light, moderate, and vigorous intensity activities. Age groups were defined by 20-29, 30-39, 40-49, and 50-64 years. BMI groups were defined by 18.5-24.9, 25.0-27.4, 27.5-29.9, 30.0-34.9, and ≥35.0 kg/m2. Logistic and linear regression were used to examine the association between BMI and employment in a sedentary occupation, considering time spent in sleep, other non-work time spent in sedentary behaviors, and light, moderate, and vigorous intensity activities, sex, age race/ethnicity, and household income. The analysis data set comprised 4,092 non-pregnant, non-underweight individuals 20-64 years of age who also reported working more than 7 hours at their primary jobs on their designated time use reporting day. Logistic and linear regression analyses failed to reveal any associations between BMI and the sedentary/non-sedentary occupation dichotomy considering time spent in sleep, other non-work time spent in sedentary behaviors, and light, moderate, and vigorous intensity activities, sex, age, race/ethnicity, and household income. We found no evidence of a relationship between self-reported full time sedentary occupation classification and BMI after accounting for sex, age, race/ethnicity, and household income and 24-hours of time use including non-work related physical activity and sedentary behaviors. The various sources of error associated with self-report methods and assignment of generalized activity and occupational intensity categories could compound to obscure any real relationships.

Body Mass Index: Accounting for Full Time Sedentary Occupation and 24-Hr Self-Reported Time Use

PubMed Central

Tudor-Locke, Catrine; Schuna, John M.; Katzmarzyk, Peter T.; Liu, Wei; Hamrick, Karen S.; Johnson, William D.

2014-01-01

Objectives We used linked existing data from the 2006–2008 American Time Use Survey (ATUS), the Current Population Survey (CPS, a federal survey that provides on-going U.S. vital statistics, including employment rates) and self-reported body mass index (BMI) to answer: How does BMI vary across full time occupations dichotomized as sedentary/non-sedentary, accounting for time spent in sleep, other sedentary behaviors, and light, moderate, and vigorous intensity activities? Methods We classified time spent engaged at a primary job (sedentary or non-sedentary), sleep, and other non-work, non-sleep intensity-defined behaviors, specifically, sedentary behavior, light, moderate, and vigorous intensity activities. Age groups were defined by 20–29, 30–39, 40–49, and 50–64 years. BMI groups were defined by 18.5–24.9, 25.0–27.4, 27.5–29.9, 30.0–34.9, and ≥35.0 kg/m2. Logistic and linear regression were used to examine the association between BMI and employment in a sedentary occupation, considering time spent in sleep, other non-work time spent in sedentary behaviors, and light, moderate, and vigorous intensity activities, sex, age race/ethnicity, and household income. Results The analysis data set comprised 4,092 non-pregnant, non-underweight individuals 20–64 years of age who also reported working more than 7 hours at their primary jobs on their designated time use reporting day. Logistic and linear regression analyses failed to reveal any associations between BMI and the sedentary/non-sedentary occupation dichotomy considering time spent in sleep, other non-work time spent in sedentary behaviors, and light, moderate, and vigorous intensity activities, sex, age, race/ethnicity, and household income. Conclusions We found no evidence of a relationship between self-reported full time sedentary occupation classification and BMI after accounting for sex, age, race/ethnicity, and household income and 24-hours of time use including non-work related physical activity and sedentary behaviors. The various sources of error associated with self-report methods and assignment of generalized activity and occupational intensity categories could compound to obscure any real relationships. PMID:25295601

Three-dimensional localization and optical imaging of objects in turbid media with independent component analysis.

PubMed

Xu, M; Alrubaiee, M; Gayen, S K; Alfano, R R

2005-04-01

A new approach for optical imaging and localization of objects in turbid media that makes use of the independent component analysis (ICA) from information theory is demonstrated. Experimental arrangement realizes a multisource illumination of a turbid medium with embedded objects and a multidetector acquisition of transmitted light on the medium boundary. The resulting spatial diversity and multiple angular observations provide robust data for three-dimensional localization and characterization of absorbing and scattering inhomogeneities embedded in a turbid medium. ICA of the perturbations in the spatial intensity distribution on the medium boundary sorts out the embedded objects, and their locations are obtained from Green's function analysis based on any appropriate light propagation model. Imaging experiments were carried out on two highly scattering samples of thickness approximately 50 times the transport mean-free path of the respective medium. One turbid medium had two embedded absorptive objects, and the other had four scattering objects. An independent component separation of the signal, in conjunction with diffusive photon migration theory, was used to locate the embedded inhomogeneities. In both cases, improved lateral and axial localizations of the objects over the result obtained by use of common photon migration reconstruction algorithms were achieved. The approach is applicable to different medium geometries, can be used with any suitable photon propagation model, and is amenable to near-real-time imaging applications.

OPTIMIZATION OF HETEROGENEOUS UTILIZATION OF THORIUM IN PWRS TO ENHANCE PROLIFERATION RESISTANCE AND REDUCE WASTE.

DOE Office of Scientific and Technical Information (OSTI.GOV)

TODOSOW,M.; KAZIMI,M.

2004-08-01

Issues affecting the implementation, public perception and acceptance of nuclear power include: proliferation, radioactive waste, safety, and economics. The thorium cycle directly addresses the proliferation and waste issues, but optimization studies of core design and fuel management are needed to ensure that it fits within acceptable safety and economic margins. Typical pressurized water reactors, although loaded with uranium fuel, produce 225 to 275 kg of plutonium per gigawatt-year of operation. Although the spent fuel is highly radioactive, it nevertheless offers a potential proliferation pathway because the plutonium is relatively easy to separate, amounts to many critical masses, and does notmore » present any significant intrinsic barrier to weapon assembly. Uranium 233, on the other hand, produced by the irradiation of thorium, although it too can be used in weapons, may be ''denatured'' by the addition of natural, depleted or low enriched uranium. Furthermore, it appears that the chemical behavior of thoria or thoria-urania fuel makes it a more stable medium for the geological disposal of the spent fuel. It is therefore particularly well suited for a once-through fuel cycle. The use of thorium as a fertile material in nuclear fuel has been of interest since the dawn of nuclear power technology due to its abundance and to potential neutronic advantages. Early projects include homogeneous mixtures of thorium and uranium oxides in the BORAX-IV, Indian Point I, and Elk River reactors, as well as heterogeneous mixtures in the Shippingport seed-blanket reactor. However these projects were developed under considerably different circumstances than those which prevail at present. The earlier applications preceded the current proscription, for non-proliferation purposes, of the use of uranium enriched to more than 20 w/o in {sup 235}U, and has in practice generally prohibited the use of uranium highly enriched in {sup 235}U. They were designed when the expected burnup of light water fuel was on the order of 25 MWD/kgU--about half the present day value--and when it was expected that the spent fuel would be recycled to recover its fissile content.« less

Time allocation shifts and pollutant exposure due to traffic congestion: an analysis using the national human activity pattern survey.

PubMed

Zhang, Kai; Batterman, Stuart A

2009-10-15

Traffic congestion increases air pollutant exposures of commuters and urban populations due to the increased time spent in traffic and the increased vehicular emissions that occur in congestion, especially "stop-and-go" traffic. Increased time in traffic also decreases time in other microenvironments, a trade-off that has not been considered in previous time activity pattern (TAP) analyses conducted for exposure assessment purposes. This research investigates changes in time allocations and exposures that result from traffic congestion. Time shifts were derived using data from the National Human Activity Pattern Survey (NHAPS), which was aggregated to nine microenvironments (six indoor locations, two outdoor locations and one transport location). After imputing missing values, handling outliers, and conducting other quality checks, these data were stratified by respondent age, employment status and period (weekday/weekend). Trade-offs or time-shift coefficients between time spent in vehicles and the eight other microenvironments were then estimated using robust regression. For children and retirees, congestion primarily reduced the time spent at home; for older children and working adults, congestion shifted the time spent at home as well as time in schools, public buildings, and other indoor environments. Changes in benzene and PM(2.5) exposure were estimated for the current average travel delay in the U.S. (9 min day(-1)) and other scenarios using the estimated time shifts coefficients, concentrations in key microenvironments derived from the literature, and a probabilistic analysis. Changes in exposures depended on the duration of the congestion and the pollutant. For example, a 30 min day(-1) travel delay was determined to account for 21+/-12% of current exposure to benzene and 14+/-8% of PM(2.5) exposure. The time allocation shifts and the dynamic approach to TAPs improve estimates of exposure impacts from congestion and other recurring events.

Analysis of a hydrometallurgical route to recover base metals from spent rechargeable batteries by liquid-liquid extraction with Cyanex 272

NASA Astrophysics Data System (ADS)

Mantuano, Danuza Pereira; Dorella, Germano; Elias, Renata Cristina Alves; Mansur, Marcelo Borges

A hydrometallurgical route is proposed to recover zinc and manganese from spent alkaline batteries in order to separate base metals such as nickel, copper, aluminium, cadmium, lithium and cobalt which constitute the main metallic species of spent NiCd, NiMH and Li-ion rechargeable batteries. The route comprises the following main steps: (1) sorting batteries by type, (2) battery dismantling to separate the spent battery dust from plastic, iron scrap and paper, (3) leaching of the dust with sulphuric acid and (4) metal separation by a liquid-liquid extraction using Cyanex 272 (bis-2,4,4-trimethylpentyl phosphinic acid) as extractant. The metal content of NiCd, NiMH and Li-ion batteries from three distinct manufacturers has been evaluated. A factorial design of experiments was used to investigate the leaching step using operational variables such as temperature, H 2SO 4 concentration, S/L ratio and H 2O 2 concentration. Analysis of metal separation by the liquid-liquid extraction with Cyanex 272 identified a pH 1/2 2.5-3.0 for zinc and aluminium, pH 1/2 4.0-4.5 for manganese, cadmium, copper and cobalt, pH 1/2 6.5 for nickel and pH 1/2 8.0 for lithium. These results indicate that batteries must be previously sorted by type and treated separately. In addition, data fitting to an equilibrium model proposed for the reactive test system by the European Federation of Chemical Engineering (EFChE) have indicated that MR 2(RH) 2 and MR 2 complexes (where M = Zn, Mn, Co, Cd and Cu) co-exist in the organic phase with Cyanex 272 depending on the loading conditions. The route has been found technically viable to separate the main metallic species of all batteries considered in this study.

Cost-effectiveness of FreeO2 in patients with chronic obstructive pulmonary disease hospitalised for acute exacerbations: analysis of a pilot study in Quebec

PubMed Central

Poder, Thomas G; Kouakou, Christian R C; Bouchard, Pierre-Alexandre; Tremblay, Véronique; Blais, Sébastien; Maltais, François; Lellouche, François

2018-01-01

Objective Conduct a cost-effectiveness analysis of FreeO2 technology versus manual oxygen-titration technology for patients with chronic obstructive pulmonary disease (COPD) hospitalised for acute exacerbations. Setting Tertiary acute care hospital in Quebec, Canada. Participants 47 patients with COPD hospitalised for acute exacerbations. Intervention An automated oxygen-titration and oxygen-weaning technology. Methods and outcomes The costs for hospitalisation and follow-up for 180 days were calculated using a microcosting approach and included the cost of FreeO2 technology. Incremental cost-effectiveness ratios (ICERs) were calculated using bootstrap resampling with 5000 replications. The main effect variable was the percentage of time spent at the target oxygen saturation (SpO2). The other two effect variables were the time spent in hyperoxia (target SpO2+5%) and in severe hypoxaemia (SpO2 <85%). The resamplings were based on data from a randomised controlled trial with 47 patients with COPD hospitalised for acute exacerbations. Results FreeO2 generated savings of 20.7% of the per-patient costs at 180 days (ie, −$C2959.71). This decrease is nevertheless not significant at the 95% threshold (P=0.13), but the effect variables all improved (P<0.001). The improvement in the time spent at the target SpO2 was 56.3%. The ICERs indicate that FreeO2 technology is more cost-effective than manual oxygen titration with a savings of −$C96.91 per percentage point of time spent at the target SpO2 (95% CI −301.26 to 116.96). Conclusion FreeO2 technology could significantly enhance the efficiency of the health system by reducing per-patient costs at 180 days. A study with a larger patient sample needs to be carried out to confirm these preliminary results. Trial registration number NCT01393015; Post-results. PMID:29362258

Method for filtering solvent and tar sand mixtures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelterborn, J. C.; Stone, R. A.

1985-09-03

A method for filtering spent tar sands from a bitumen and organic solvent solution comprises separating the solution into two streams wherein the bulk of the coarser spent tar sand is in a first stream and has an average particle size of about 10 to about 100 mesh and the bulk of the finer spent tar sand is in a second stream; producing a filter cake by filtering the coarser spent tar sand from the first stream; and filtering the finer spent tar sand from the second stream with the filter cake. The method is particularly useful for filtering solutionsmore » of bitumen extracted from bitumen containing diatomite, spent diatomite and organic solvent.« less

5 CFR 551.422 - Time spent traveling.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Time spent traveling. 551.422 Section 551... Activities § 551.422 Time spent traveling. (a) Time spent traveling shall be considered hours of work if: (1... who is permitted to use an alternative mode of transportation, or an employee who travels at a time...

5 CFR 551.422 - Time spent traveling.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Time spent traveling. 551.422 Section 551... Activities § 551.422 Time spent traveling. (a) Time spent traveling shall be considered hours of work if: (1... who is permitted to use an alternative mode of transportation, or an employee who travels at a time...

5 CFR 551.422 - Time spent traveling.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Time spent traveling. 551.422 Section 551... Activities § 551.422 Time spent traveling. (a) Time spent traveling shall be considered hours of work if: (1... who is permitted to use an alternative mode of transportation, or an employee who travels at a time...

5 CFR 551.422 - Time spent traveling.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false Time spent traveling. 551.422 Section 551... Activities § 551.422 Time spent traveling. (a) Time spent traveling shall be considered hours of work if: (1... who is permitted to use an alternative mode of transportation, or an employee who travels at a time...

5 CFR 551.422 - Time spent traveling.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Time spent traveling. 551.422 Section 551... Activities § 551.422 Time spent traveling. (a) Time spent traveling shall be considered hours of work if: (1... who is permitted to use an alternative mode of transportation, or an employee who travels at a time...

40 CFR 63.1082 - What definitions do I need to know?

Code of Federal Regulations, 2011 CFR

2011-07-01

... includes direct-contact cooling water. Spent caustic waste stream means the continuously flowing process... compounds from process streams, typically cracked gas. The spent caustic waste stream does not include spent..., and the C4 butadiene storage equipment; and spent wash water from the C4 crude butadiene carbonyl wash...

40 CFR 63.1082 - What definitions do I need to know?

Code of Federal Regulations, 2012 CFR

2012-07-01

... includes direct-contact cooling water. Spent caustic waste stream means the continuously flowing process... compounds from process streams, typically cracked gas. The spent caustic waste stream does not include spent..., and the C4 butadiene storage equipment; and spent wash water from the C4 crude butadiene carbonyl wash...

40 CFR 63.1082 - What definitions do I need to know?

Code of Federal Regulations, 2014 CFR

2014-07-01

... includes direct-contact cooling water. Spent caustic waste stream means the continuously flowing process... compounds from process streams, typically cracked gas. The spent caustic waste stream does not include spent..., and the C4 butadiene storage equipment; and spent wash water from the C4 crude butadiene carbonyl wash...

40 CFR 63.1082 - What definitions do I need to know?

Code of Federal Regulations, 2013 CFR

2013-07-01

... includes direct-contact cooling water. Spent caustic waste stream means the continuously flowing process... compounds from process streams, typically cracked gas. The spent caustic waste stream does not include spent..., and the C4 butadiene storage equipment; and spent wash water from the C4 crude butadiene carbonyl wash...

Evaluation of spent coffee obtained from the most common coffeemakers as a source of hydrophilic bioactive compounds.

PubMed

Bravo, Jimena; Juániz, Isabel; Monente, Carmen; Caemmerer, Bettina; Kroh, Lothar W; De Peña, M Paz; Cid, Concepción

2012-12-26

The main hydrophilic antioxidant compounds (3-, 4-, and 5-monocaffeoylquinic and 3,4-, 3,5-, and 4,5-dicaffeoylquinic acids, caffeine, and browned compounds, including melanoidins) and the antioxidant capacity (Folin-Ciocalteu, ABTS, DPPH, Fremy's salt, and TEMPO) were evaluated in Arabica and Robusta spent coffee obtained from the preparation of coffee brews with the most common coffeemakers (filter, espresso, plunger, and mocha). All spent coffee grounds, with the exception of those from the mocha coffeemaker, had relevant amounts of total caffeoylquinic acids (6.22-13.24 mg/g of spent coffee), mainly dicaffeoylquinic acids (3.31-5.79 mg/g of spent coffee), which were 4-7-fold higher than in their respective coffee brews. Caffeine ranged from 3.59 to 8.09 mg/g of spent coffee. The antioxidant capacities of the aqueous spent coffee extracts were 46.0-102.3% (filter), 59.2-85.6% (espresso), and <42% (plunger) in comparison to their respective coffee brews. This study obtained spent coffee extracts with antioxidant properties that can be used as a good source of hydrophilic bioactive compounds.

Antioxidant and genoprotective effects of spent coffee extracts in human cells.

PubMed

Bravo, Jimena; Arbillaga, Leire; de Peña, M Paz; Cid, Concepcion

2013-10-01

Spent coffee has been shown as a good source of hydrophilic antioxidant compounds. The ability of two spent coffee extracts rich in caffeoylquinic acids, mainly dicaffeoylquinic acids, and caffeine (Arabica filter and Robusta espresso) to protect against oxidation and DNA damage in human cells (HeLa) was evaluated at short (2 h) and long (24 h) exposure times. Cell viability (MTT) was not affected by spent coffee extracts (>80%) up to 1000 μg/mL after 2 h. Both spent coffee extracts significantly reduced the increase of ROS level and DNA strand breaks (29-73% protection by comet assay) induced by H₂O₂. Pretreatment of cells with robusta spent coffee extract also decreased Ro photosensitizer-induced oxidative DNA damage after 24 h exposure. The higher effectiveness of Robusta spent coffee extract, with less caffeoylquinic acids and melanoidins, might be due to other antioxidant compounds, such as caffeine and other Maillard reaction products. This work evidences the potential antioxidant and genoprotective properties of spent coffee in human cells. Copyright © 2013 Elsevier Ltd. All rights reserved.

[Cooperation, Job Satisfaction and Burn Out - Sustainability in Outpatient Mental Health Care among Medical Specialists in Germany].

PubMed

Baumgardt, Johanna; Moock, Jörn; Rössler, Wulf; Kawohl, Wolfram

2017-04-01

Objective Cooperation, job satisfaction, and burn out risk are indicators of sustainability in mental health services. Thus they were assessed among registered medical specialists in outpatient mental health care in Germany. Method A postal survey consisting of three questionnaires about cooperation, job satisfaction, and burnout was carried out among all registered medical specialists in outpatient mental health care in Germany (n = 4,430). Results 14.1 % (n = 626) of the specialists responded to the survey. Quality and quantity of cooperation regarding mental health care services were rated diverse, job satisfaction was assessed medium to high, and burnout risk was low to medium. Higher job satisfaction correlated with good quality of cooperation, fewer years of practice, fewer patients' chronically ill, more patients who as well seek psychotherapy, and less time spent on cooperation. Low burn out risk correlated with good quality of cooperation, higher age, single practice setting and a higher amount of patients who as well seek psychotherapy. Conclusion Quality and quantity of cooperation in outpatient mental health care - especially regarding community mental health care institutions - should be fostered. Aspects to be considered to reinforce job satisfaction and minimize burn out risk are age, years of practice, quality and quantity of cooperation, practice setting, and the mixture of patients. © Georg Thieme Verlag KG Stuttgart · New York.

High Resolution Spectroscopy in the Far UV: Observations of the Interstellar Medium by IMAPS on ORFEUS-SPAS

NASA Astrophysics Data System (ADS)

Jenkins, Edward B.; Reale, Michael A.; Zucchino, Paul M.; Sofia, Ulysses J.

1996-09-01

The Interstellar Medium Absorption Profile Spectrograph (IMAPS) is an objectivegrating, echelle spectrograph built to observe the spectra of bright, hot stars over the spectral region 950 1150Å, below the wavelength coverage of HST. This instrument has a high wavelength resolving power, making it especially well suited for studies of interstellar absorption lines. Following a series of sounding rocket flights in the 1980's, IMAPS flew on its first Shuttle-launched orbital mission in September 1993, as a partner in the ORFEUS-SPAS program sponsored by the US and German Space Agencies, NASA and DARA. On ORFEUS-SPAS, IMAPS spent one day of orbital time observing the spectra of 10 O- and early B-type stars. In addition to outlining how IMAPS works, we document some special problems that had an influence on the data, and we explain the specific steps in data reduction that were employed to overcome them. This discussion serves as a basic source of information for people who may use archival data from this flight, as well as those who are interested in some specific properties of the data that will be presented in forthcoming research papers. IMAPS is scheduled to fly once again on ORFEUS-SPAS in late 1996. On this flight, 50% of the observing time available for IMAPS and two other spectrographs on the mission will be available to guest observers.

Brewery Waste Reuse for Protease Production by Lactic 
Acid Fermentation

PubMed Central

2017-01-01

Summary This study evaluated the use of three solid brewery wastes: brewer’s spent grain, hot trub and residual brewer’s yeast, as alternative media for the cultivation of lactic acid bacteria to evaluate their potential for proteolytic enzyme production. Initially, a mixture experimental design was used to evaluate the effect of each residue, as well as different mixtures (with the protein content set at 4%) in the enzyme production. At predetermined intervals, the solid and liquid fractions were separated and the extracellular proteolytic activity was determined. After selecting the best experimental conditions, a second experiment, factorial experimental design, was developed in order to evaluate the protein content in the media (1 to 7%) and the addition of fermentable sugar (glucose, 1 to 7%). Among the wastes, residual yeast showed the highest potential for the production of extracellular enzymes, generating a proteolytic extract with 2.6 U/mL in 3 h. However, due to the low content of the fermentable sugars in the medium, the addition of glucose also had a positive effect, increasing the proteolytic activity to 4.9 U/mL. The best experimental conditions of each experimental design were reproduced for comparison, and the enzyme content was separated by ethanol precipitation. The best medium produced a precipitated protein with proteolytic activity of 145.5 U/g. PMID:28867951

Reforming of fuel inside fuel cell generator

DOEpatents

Grimble, Ralph E.

1988-01-01

Disclosed is an improved method of reforming a gaseous reformable fuel within a solid oxide fuel cell generator, wherein the solid oxide fuel cell generator has a plurality of individual fuel cells in a refractory container, the fuel cells generating a partially spent fuel stream and a partially spent oxidant stream. The partially spent fuel stream is divided into two streams, spent fuel stream I and spent fuel stream II. Spent fuel stream I is burned with the partially spent oxidant stream inside the refractory container to produce an exhaust stream. The exhaust stream is divided into two streams, exhaust stream I and exhaust stream II, and exhaust stream I is vented. Exhaust stream II is mixed with spent fuel stream II to form a recycle stream. The recycle stream is mixed with the gaseous reformable fuel within the refractory container to form a fuel stream which is supplied to the fuel cells. Also disclosed is an improved apparatus which permits the reforming of a reformable gaseous fuel within such a solid oxide fuel cell generator. The apparatus comprises a mixing chamber within the refractory container, means for diverting a portion of the partially spent fuel stream to the mixing chamber, means for diverting a portion of exhaust gas to the mixing chamber where it is mixed with the portion of the partially spent fuel stream to form a recycle stream, means for injecting the reformable gaseous fuel into the recycle stream, and means for circulating the recycle stream back to the fuel cells.

Reforming of fuel inside fuel cell generator

DOEpatents

Grimble, R.E.

1988-03-08

Disclosed is an improved method of reforming a gaseous reformable fuel within a solid oxide fuel cell generator, wherein the solid oxide fuel cell generator has a plurality of individual fuel cells in a refractory container, the fuel cells generating a partially spent fuel stream and a partially spent oxidant stream. The partially spent fuel stream is divided into two streams, spent fuel stream 1 and spent fuel stream 2. Spent fuel stream 1 is burned with the partially spent oxidant stream inside the refractory container to produce an exhaust stream. The exhaust stream is divided into two streams, exhaust stream 1 and exhaust stream 2, and exhaust stream 1 is vented. Exhaust stream 2 is mixed with spent fuel stream 2 to form a recycle stream. The recycle stream is mixed with the gaseous reformable fuel within the refractory container to form a fuel stream which is supplied to the fuel cells. Also disclosed is an improved apparatus which permits the reforming of a reformable gaseous fuel within such a solid oxide fuel cell generator. The apparatus comprises a mixing chamber within the refractory container, means for diverting a portion of the partially spent fuel stream to the mixing chamber, means for diverting a portion of exhaust gas to the mixing chamber where it is mixed with the portion of the partially spent fuel stream to form a recycle stream, means for injecting the reformable gaseous fuel into the recycle stream, and means for circulating the recycle stream back to the fuel cells. 1 fig.

Image analysis technique as a tool to identify morphological changes in Trametes versicolor pellets according to exopolysaccharide or laccase production.

PubMed

Tavares, Ana P M; Silva, Rui P; Amaral, António L; Ferreira, Eugénio C; Xavier, Ana M R B

2014-02-01

Image analysis technique was applied to identify morphological changes of pellets from white-rot fungus Trametes versicolor on agitated submerged cultures during the production of exopolysaccharide (EPS) or ligninolytic enzymes. Batch tests with four different experimental conditions were carried out. Two different culture media were used, namely yeast medium or Trametes defined medium and the addition of lignolytic inducers as xylidine or pulp and paper industrial effluent were evaluated. Laccase activity, EPS production, and final biomass contents were determined for batch assays and the pellets morphology was assessed by image analysis techniques. The obtained data allowed establishing the choice of the metabolic pathways according to the experimental conditions, either for laccase enzymatic production in the Trametes defined medium, or for EPS production in the rich Yeast Medium experiments. Furthermore, the image processing and analysis methodology allowed for a better comprehension of the physiological phenomena with respect to the corresponding pellets morphological stages.

The Future of Utility Customer-Funded Energy Efficiency Programs in the United States: Projected Spending and Savings to 2025

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barbose, Galen; Goldman, Charles; Hoffman, Ian

2012-09-11

We develop projections of future spending on, and savings from, energy efficiency programs funded by electric and gas utility customers in the United States, under three scenarios through 2025. Our analysis, which updates a previous LBNL study, relies on detailed bottom-up modeling of current state energy efficiency policies, regulatory decisions, and demand-side management and utility resource plans. The three scenarios are intended to represent a range of potential outcomes under the current policy environment (i.e., without considering possible major new policy developments). By 2025, spending on electric and gas efficiency programs (excluding load management programs) is projected to double frommore » 2010 levels to $9.5 billion in the medium case, compared to $15.6 billion in the high case and $6.5 billion in the low case. Compliance with statewide legislative or regulatory savings or spending targets is the primary driver for the increase in electric program spending through 2025, though a significant share of the increase is also driven by utility DSM planning activity and integrated resource planning. Our analysis suggests that electric efficiency program spending may approach a more even geographic distribution over time in terms of absolute dollars spent, with the Northeastern and Western states declining from over 70% of total U.S. spending in 2010 to slightly more than 50% in 2025, with the South and Midwest splitting the remainder roughly evenly. Under our medium case scenario, annual incremental savings from customer-funded electric energy efficiency programs increase from 18.4 TWh in 2010 in the U.S. (which is about 0.5% of electric utility retail sales) to 28.8 TWh in 2025 (0.8% of retail sales). These savings would offset the majority of load growth in the Energy Information Administration’s most recent reference case forecast, given specific assumptions about the extent to which future energy efficiency program savings are captured in that forecast. However, the pathway that customer-funded efficiency programs ultimately take will depend on a series of key challenges and uncertainties associated both with the broader market and policy context and with the implementation and regulatory oversight of the energy efficiency programs themselves.« less

[Analysis of economic viability of a mobile eye clinic of a referral Ophthalmology Service].

PubMed

Lima, Luiz Henrique Soares Gonçalves de; Sousa, Luciene Barbosa de

2005-01-01

To analyse the economic viability of a mobile eye clinic of a tertiary referral Ophthalmology Service. The amount of money spent with the purchase and construction of the unit in 2000, and the expenses with its maintenance and operation in 2001 were considered, comparing these expenses with the income obtained from appointments, supplementary tests and eye surgeries through the "Sistema Unico de Saúde" (a health care service provided by the government), in 2001. In order to make an economic analysis, an interest rate of 10% per year and a period of depreciation of 10 years were stipulated. The total amount spent to buy and set up a mobile unit of "Hospital Oftamológico de Sorocaba" was R$ 184,140,00. The amount spent with its maintenance and operation during 2001 was R$ 28,000.00. The unit was used on average during 2 days each week in 2001 and 6492 appointments were made in this period, generating an income of R$ 32,460.00. The appointments generated complementary tests and eye surgeries making up R$ 51,540.00. Therefore, the total amount received directly with the appointments, complementary tests and eye surgeries during 2001 was R$ 84,000.00 paid by the "Sistema Unico de Saúde", according to values established beforehand. Using these values it is possible to make an economic analysis of this enterprise and this was done with and without money savings for depreciation, taking into account the income and the expenses. Besides attending poor communities that are located in distant neighborhoods, a mobile eye clinic can be a source of income for ophthalmologic services.

Noninvasive Ventilation During Immediate Postoperative Period in Cardiac Surgery Patients: Systematic Review and Meta-Analysis

PubMed Central

Pieczkoski, Suzimara Monteiro; Margarites, Ane Glauce Freitas; Sbruzzi, Graciele

2017-01-01

Objective To verify the effectiveness of noninvasive ventilation compared to conventional physiotherapy or oxygen therapy in the mortality rate and prevention of pulmonary complications in patients during the immediate postoperative period of cardiac surgery. Methods Systematic review and meta-analysis recorded in the International Prospective Register of Ongoing Systematic Reviews (number CRD42016036441). The research included the following databases: MEDLINE, Cochrane Central, PEDro, LILACS and manual search of the references of studies published until March 2016. The review included randomized controlled trials with patients during the immediate postoperative period of cardiac surgery, which compared the use of noninvasive ventilation, BiLevel modes, continuous positive airway pressure, intermittent positive pressure breathing and positive pressure ventilation with conventional physiotherapy or oxygen therapy, and assessed the mortality rate, occurrence of pulmonary complications (atelectasis, pneumonia, acute respiratory failure, hypoxemia), reintubation rate, ventilation time, time spent in the intensive care unit (ICU), length of hospital stay and partial pressure of oxygen. Results Among the 479 selected articles, ten were included in the systematic review (n=1050 patients) and six in the meta-analysis. The use of noninvasive ventilation did not significantly reduce the risk for atelectasis (RR: 0.60; CI95% 0.28-1.28); pneumonia (RR: 0.20; CI95% 0.04-1.16), reintubation rate (RR: 0.51; CI95%: 0.15-1.66), and time spent in the ICU (-0.04 days; CI95%: -0.13; 0.05). Conclusion Prophylactic noninvasive ventilation did not significantly reduce the occurrence of pulmonary complications such as atelectasis, pneumonia, reintubation rate and time spent in the ICU. The use is still unproven and new randomized controlled trials should be carried out. PMID:28977203

ORIGAMI Automator Primer. Automated ORIGEN Source Terms and Spent Fuel Storage Pool Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wieselquist, William A.; Thompson, Adam B.; Bowman, Stephen M.

2016-04-01

Source terms and spent nuclear fuel (SNF) storage pool decay heat load analyses for operating nuclear power plants require a large number of Oak Ridge Isotope Generation and Depletion (ORIGEN) calculations. SNF source term calculations also require a significant amount of bookkeeping to track quantities such as core and assembly operating histories, spent fuel pool (SFP) residence times, heavy metal masses, and enrichments. The ORIGEN Assembly Isotopics (ORIGAMI) module in the SCALE code system provides a simple scheme for entering these data. However, given the large scope of the analysis, extensive scripting is necessary to convert formats and process datamore » to create thousands of ORIGAMI input files (one per assembly) and to process the results into formats readily usable by follow-on analysis tools. This primer describes a project within the SCALE Fulcrum graphical user interface (GUI) called ORIGAMI Automator that was developed to automate the scripting and bookkeeping in large-scale source term analyses. The ORIGAMI Automator enables the analyst to (1) easily create, view, and edit the reactor site and assembly information, (2) automatically create and run ORIGAMI inputs, and (3) analyze the results from ORIGAMI. ORIGAMI Automator uses the standard ORIGEN binary concentrations files produced by ORIGAMI, with concentrations available at all time points in each assembly’s life. The GUI plots results such as mass, concentration, activity, and decay heat using a powerful new ORIGEN Post-Processing Utility for SCALE (OPUS) GUI component. This document includes a description and user guide for the GUI, a step-by-step tutorial for a simplified scenario, and appendices that document the file structures used.« less

Insulin and insulin-like growth factor-1 (lGF-1) inhibit repair of potentially lethal radiation damage and chromosome aberrations and later DNA repair kinetics in plateau-phase A549 cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayanth, V.R.; Belfi, C.A.; Swick, A.R.

1995-08-01

Plateau-phase A549 cells exhibit a high capacity for repair of potentially lethal radiation damage (PLD) when allowed to recover in their own spent medium. Addition of either insulin or insulin-like growth factor-1 (IGF-1) to the spent medium 60 to 120 min before irradiation significantly inhibits PLD repair. The 9-h recovery factor (survival with holding/survival without holding)is reduced from 10.8 {plus_minus} 0.7 to 3.4 {plus_minus}0.3 by insulin and to 3.0 {plus_minus} 0.4 by IGF-1. Neither growth factor alters the cell age distribution of the plateau-phase cells, increases the rate of incorporation of 5-bromo-2{prime}-deoxyuridine into DNA, or alters the extent of radiation-inducedmore » mitotic delay in cells subcultured immediately after irradiation. Both insulin and IGF-1 alter the kinetics for rejoining of DNA double-strand breaks (DSBs), slowing the fast component of rejoining significantly. However, these growth factors have no effect on the initial level of DSBs or on the percentage of residual unrejoined breaks at 120 min postirradiation. Both growth factors affect repair of lesions leading to dicentric, but not to acentric, chromosome aberrations significantly. In control cells (treated with phosphate-buffered saline, 90 min prior to irradiation), the half-time for disappearance of dicentrics was 4.1 h (3.4 to 5.1 h), and 47.1 {plus_minus} 3.7% of the residual damage remained at 24 h postirradiation. Insulin and IGF-1 increased the half-time for disappearance of dicentrics to 5.2 h (3.9 to 7.7 h) and 5.7 h (5.5 to 5.9 h), respectively, and increased residual damage to 56.1 {plus_minus}5.9% and 60.8 {plus_minus} 6.0%, respectively. Overall, these data show that insulin and IGF-1 inhibit PLD repair in A54j9 cells by mechanisms which are independent of changes in cell cycle parameters. The data suggest that the growth factors act by inducing changes in chromatin conformation which promote misrepair of radiation-damaged DNA. 49 refs., 5 figs., 4 tabs.« less

Transverse Vibration of Tapered Single-Walled Carbon Nanotubes Embedded in Viscoelastic Medium

NASA Astrophysics Data System (ADS)

Lei, Y. J.; Zhang, D. P.; Shen, Z. B.

2017-12-01

Based on the nonlocal theory, Euler-Bernoulli beam theory and Kelvin viscoelastic foundation model, free transverse vibration is studied for a tapered viscoelastic single-walled carbon nanotube (visco-SWCNT) embedded in a viscoelastic medium. Firstly, the governing equations for vibration analysis are established. And then, we derive the natural frequencies in closed form for SWCNTs with arbitrary boundary conditions by applying transfer function method and perturbation method. Numerical results are also presented to discuss the effects of nonlocal parameter, relaxation time and taper parameter of SWCNTs, and material property parameters of the medium. This study demonstrates that the proposed model is available for vibration analysis of the tapered SWCNTs-viscoelastic medium coupling system.

Speciation analysis and leaching behaviors of selected trace elements in spent SCR catalyst.

PubMed

Dai, Zejun; Wang, Lele; Tang, Hao; Sun, Zhijun; Liu, Wei; Sun, Yi; Su, Sheng; Hu, Song; Wang, Yi; Xu, Kai; Liu, Liang; Ling, Peng; Xiang, Jun

2018-09-01

This study investigated heavy metal chemical speciation and leaching behavior from a board-type spent selective catalytic reduction (SCR) catalyst containing high concentrations of vanadium, chromium, nickel, copper, zinc, and lead. A three-step sequential extraction method, standard toxicity characteristic leaching procedure (TCLP), and leaching characteristic tests have been performed. It was found that the mobility of six heavy metals in the spent SCR catalyst was significantly different. The mobility of the six heavy metals exhibited the following order: Ni > Zn > V > Cr > As > Cu. Meanwhile, TCLP test results revealed relatively high Zn and Cr leaching rate of 83.20% and 10.35%, respectively. It was found that leaching rate was positively correlated with available contents (sum of acid soluble, reducible and oxidizable fractions). Leaching characteristics tests indicated that pH substantially affected the leaching of these heavy metals. In particular, the leaching of Cr, Ni, Cu, and Zn was positively influenced by strong acid, while V and As were easily released in the presence of strong acid and strong alkali (pH < 3 or pH > 11). In terms of kinetics, the leaching of Cr, Ni, Cu, Zn, and As within the spent catalyst was dominated by erosion and dissolution processes, which were rapid reaction processes. V was released in large amounts within 1 h, but its leaching amount sharply decreased with time due to readsorption. Copyright © 2018 Elsevier Ltd. All rights reserved.

Radiation induced dissolution of UO 2 based nuclear fuel - A critical review of predictive modelling approaches

NASA Astrophysics Data System (ADS)

Eriksen, Trygve E.; Shoesmith, David W.; Jonsson, Mats

2012-01-01

Radiation induced dissolution of uranium dioxide (UO 2) nuclear fuel and the consequent release of radionuclides to intruding groundwater are key-processes in the safety analysis of future deep geological repositories for spent nuclear fuel. For several decades, these processes have been studied experimentally using both spent fuel and various types of simulated spent fuels. The latter have been employed since it is difficult to draw mechanistic conclusions from real spent nuclear fuel experiments. Several predictive modelling approaches have been developed over the last two decades. These models are largely based on experimental observations. In this work we have performed a critical review of the modelling approaches developed based on the large body of chemical and electrochemical experimental data. The main conclusions are: (1) the use of measured interfacial rate constants give results in generally good agreement with experimental results compared to simulations where homogeneous rate constants are used; (2) the use of spatial dose rate distributions is particularly important when simulating the behaviour over short time periods; and (3) the steady-state approach (the rate of oxidant consumption is equal to the rate of oxidant production) provides a simple but fairly accurate alternative, but errors in the reaction mechanism and in the kinetic parameters used may not be revealed by simple benchmarking. It is essential to use experimentally determined rate constants and verified reaction mechanisms, irrespective of whether the approach is chemical or electrochemical.

Refining the Patient Navigation Role in a Colorectal Cancer Screening Program: Results From an Intervention Study.

PubMed

Rohan, Elizabeth A; Slotman, Beth; DeGroff, Amy; Morrissey, Kerry Grace; Murillo, Jennifer; Schroy, Paul

2016-11-01

Oncology patient navigators help individuals overcome barriers to increase access to cancer screening, diagnosis, and timely treatment. This study, part of a randomized intervention trial investigating the efficacy of patient navigation in increasing colonoscopy completion, examined navigators' activities to ameliorate barriers to colonoscopy screening in a medically disadvantaged population. This study was conducted from 2012 through 2014 at Boston Medical Center. We analyzed navigator service delivery and survey data collected on 420 participants who were navigated for colonoscopy screening after randomization to this intervention. Key variables under investigation included barriers to colonoscopy, activities navigators undertook to reduce barriers, time navigators spent on each activity and per contact, and patient satisfaction with navigation services. Descriptive analysis assessed how navigators spent their time and examined what aspects of patient navigation were most valued by patients. Navigators spent the most time assessing patient barriers/needs; facilitating appointment scheduling; reminding patients of appointments; educating patients about colorectal cancer, the importance of screening, and the colonoscopy preparation and procedures; and arranging transportation. Navigators spent an average of 44 minutes per patient. Patients valued the navigators, especially for providing emotional/peer support and explaining screening procedures and bowel preparation clearly. Our findings help clarify the role of the navigator in colonoscopy screening within a medically disadvantaged community. These findings may help further refine the navigator role in cancer screening and treatment programs as facilities strive to effectively and efficiently integrate navigation into their services. Copyright © 2016 by the National Comprehensive Cancer Network.

Refining the Patient Navigation Role in a Colorectal Cancer Screening Program: Results From an Intervention Study

PubMed Central

Rohan, Elizabeth A.; Slotman, Beth; DeGroff, Amy; Morrissey, Kerry Grace; Murillo, Jennifer; Schroy, Paul

2017-01-01

Background Oncology patient navigators help individuals overcome barriers to increase access to cancer screening, diagnosis, and timely treatment. This study, part of a randomized intervention trial investigating the efficacy of patient navigation in increasing colonoscopy completion, examined navigators' activities to ameliorate barriers to colonoscopy screening in a medically disadvantaged population. Methods This study was conducted from 2012 through 2014 at Boston Medical Center. We analyzed navigator service delivery and survey data collected on 420 participants who were navigated for colonoscopy screening after randomization to this intervention. Key variables under investigation included barriers to colonoscopy, activities navigators undertook to reduce barriers, time navigators spent on each activity and per contact, and patient satisfaction with navigation services. Descriptive analysis assessed how navigators spent their time and examined what aspects of patient navigation were most valued by patients. Results Navigators spent the most time assessing patient barriers/needs; facilitating appointment scheduling; reminding patients of appointments; educating patients about colorectal cancer, the importance of screening, and the colonoscopy preparation and procedures; and arranging transportation. Navigators spent an average of 44 minutes per patient. Patients valued the navigators, especially for providing emotional/peer support and explaining screening procedures and bowel preparation clearly. Conclusions Our findings help clarify the role of the navigator in colonoscopy screening within a medically disadvantaged community. These findings may help further refine the navigator role in cancer screening and treatment programs as facilities strive to effectively and efficiently integrate navigation into their services. PMID:27799508

Monte Carlo characterization of PWR spent fuel assemblies to determine the detectability of pin diversion

NASA Astrophysics Data System (ADS)

Burdo, James S.

This research is based on the concept that the diversion of nuclear fuel pins from Light Water Reactor (LWR) spent fuel assemblies is feasible by a careful comparison of spontaneous fission neutron and gamma levels in the guide tube locations of the fuel assemblies. The goal is to be able to determine whether some of the assembly fuel pins are either missing or have been replaced with dummy or fresh fuel pins. It is known that for typical commercial power spent fuel assemblies, the dominant spontaneous neutron emissions come from Cm-242 and Cm-244. Because of the shorter half-life of Cm-242 (0.45 yr) relative to that of Cm-244 (18.1 yr), Cm-244 is practically the only neutron source contributing to the neutron source term after the spent fuel assemblies are more than two years old. Initially, this research focused upon developing MCNP5 models of PWR fuel assemblies, modeling their depletion using the MONTEBURNS code, and by carrying out a preliminary depletion of a ¼ model 17x17 assembly from the TAKAHAMA-3 PWR. Later, the depletion and more accurate isotopic distribution in the pins at discharge was modeled using the TRITON depletion module of the SCALE computer code. Benchmarking comparisons were performed with the MONTEBURNS and TRITON results. Subsequently, the neutron flux in each of the guide tubes of the TAKAHAMA-3 PWR assembly at two years after discharge as calculated by the MCNP5 computer code was determined for various scenarios. Cases were considered for all spent fuel pins present and for replacement of a single pin at a position near the center of the assembly (10,9) and at the corner (17,1). Some scenarios were duplicated with a gamma flux calculation for high energies associated with Cm-244. For each case, the difference between the flux (neutron or gamma) for all spent fuel pins and with a pin removed or replaced is calculated for each guide tube. Different detection criteria were established. The first was whether the relative error of the difference was less than 1.00, allowing for the existence of the difference within the margin of error. The second was whether the difference between the two values was big enough to prevent their error bars from overlapping. Error analysis was performed both using a one second count and pseudo-Maxwell statistics for a projected 60 second count, giving four criteria for detection. The number of guide tubes meeting these criteria was compared and graphed for each case. Further analysis at extremes of high and low enrichment and long and short burnup times was done using data from assemblies at the Beaver Valley 1 and 2 PWR. In all neutron flux cases, at least two guide tube locations meet all the criteria for detection of pin diversion. At least one location in almost all of the gamma flux cases does. These results show that placing detectors in the empty guide tubes of spent fuel bundles to identify possible pin diversion is feasible.

Fenton-driven regeneration of MTBE-spent granular activated carbon - Effects of particle size and Iron Amendment Procedures

EPA Science Inventory

Fenton-driven regeneration of spent granular activated carbon (GAC) is a technology being developed to regenerate organic contaminant-spent GAC. Here, the effect of GAC particle size (>2 mm to <0.35 mm) on Fenton-driven oxidation of methyl tert-butyl ether (MTBE)-spent GAC was ev...

Spent refractory reuse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, J.P.; Kwong, K.S.; Clark, J.A.

1996-12-31

The Albany Research Center is conducting work on spent refractory recycling/alternate use, including a review of refractory usage and current recycling/disposal practices. Research has focused on the hazardous nature of some spent refractory materials, with emphasis on lead pickup. Information on the issues associated with the reuse of spent refractories will be presented, including those associated with hazardous materials.

Evaluating spent CCA residential decks for second-life products

Treesearch

Robert Smith; David Bailey; Phil Araman

2003-01-01

The amount of CCA treated wood being removed from spent residential decks is increasing at a tremendous rate. While most spent CCA treated wood is being disposed in landfills, further useful and environmentally beneficial alternatives have to be met. This research estimated the percentage of recoverable lumber from spent CCA decks that can be recycled into other usable...

Aircraft requirements for low/medium density markets

NASA Technical Reports Server (NTRS)

Ausrotas, R.; Dodge, S.; Faulkner, H.; Glendinning, I.; Hays, A.; Simpson, R.; Swan, W.; Taneja, N.; Vittek, J.

1973-01-01

A study was conducted to determine the demand for and the economic factors involved in air transportation in a low and medium density market. The subjects investigated are as follows: (1) industry and market structure, (2) aircraft analysis, (3) economic analysis, (4) field surveys, and (5) computer network analysis. Graphs are included to show the economic requirements and the aircraft performance characteristics.

Regional variation in hospitalisation and mortality in heart failure: comparison of England and Lombardy using multistate modelling.

PubMed

Bottle, Alex; Ventura, Chiara Maria; Dharmarajan, Kumar; Aylin, Paul; Ieva, Francesca; Paganoni, Anna Maria

2018-06-01

Heart failure (HF) is a common, serious chronic condition with high morbidity, hospitalisation and mortality. The healthcare systems of England and the northern Italian region of Lombardy share important similarities and have comprehensive hospital administrative databases linked to the death register. We used them to compare admission for HF and mortality for patients between 2006 and 2012 (n = 37,185 for Lombardy, 234,719 for England) with multistate models. Despite close similarities in age, sex and common comorbidities of the two sets of patients, in Lombardy, HF admissions were longer and more frequent per patient than in England, but short- and medium-term mortality was much lower. English patients had more very short stays, but their very elderly also had longer stays than their Lombardy counterparts. Using a three-state model, the predicted total time spent in hospital showed large differences between the countries: women in England spent an average of 24 days if aged 65 at first admission and 19 days if aged 85; in Lombardy these figures were 68 and 27 days respectively. Eight-state models suggested disease progression that appeared similar in each country. Differences by region within England were modest, with London patients spending more time in hospital and having lower mortality than the rest of England. Whilst clinical practice differences plausibly explain these patterns, we cannot confidently disentangle the impact of alternatives such as coding, casemix, and the availability and use of non-hospital settings. We need to better understand the links between rehospitalisation frequency and mortality.

Monitoring of blazars on the SPbSU 16" telescope

NASA Astrophysics Data System (ADS)

Troitskiy, I. S.; Morozova, D. A.; Blinov, D. A.; Larionov, V. M.; Ershtadt, S. G.

2012-05-01

The fast variability in the total and polarized fluxes is prominent feature of blazars. The analysis demands dense series of observations. Meade 16" LX200 telescope is one of the basic instruments for these purposes in St.Petersburg State University. The photometry in B, V, R, I bands and polarimetry of the majority of program sources are spent. Thanks to organizational, methodical and technical solutions it was possible to achieve high efficiency of usage of the telescope for blazar monitoring. Unique observаtions series have been received. Results were included into articles published in such magazines, as the Astronomy Letters, Astronomy Reports, A&A, ApJ, Nature. International programs of active galactic nuclei monitoring are regularly spent.

Final treatment of spent batteries by thermal plasma.

PubMed

Cubas, Anelise Leal Vieira; Machado, Marina de Medeiros; Machado, Marília de Medeiros; Dutra, Ana Regina de Aguiar; Moecke, Elisa Helena Siegel; Fiedler, Haidi D; Bueno, Priscila

2015-08-15

The growth in the use of wireless devices, notebooks and other electronic products has led to an ever increasing demand for batteries, leading to these products being commonly found in inappropriate locations, with adverse effects on the environment and human health. Due to political pressure and according to the environmental legislation which regulates the destination of spent batteries, in several countries the application of reverse logistics to hazardous waste is required. Thus, some processes have been developed with the aim of providing an appropriate destination for these products. In this context, a method for the treatment of spent batteries using thermal plasma technology is proposed herein. The efficiency of the method was tested through the determination of parameters, such as total organic carbon, moisture content and density, as well as analysis by atomic absorption spectrometry, scanning electron microscopy and X-ray fluorescence using samples before and after inertization. The value obtained for the density was 19.15%. The TOC results indicated 8.05% of C in the batteries prior to pyrolisis and according to the XRF analysis Fe, S, Mn and Zn were the most stable elements in the samples (highest peaks). The efficiency of the paste inertization was 97% for zinc and 99.74% for manganese. The results also showed that the most efficient reactor was that with the DC transferred arc plasma torch and quartzite sand positively influenced by the vitrification during the pyrolysis of the electrolyte paste obtain from batteries. Copyright © 2015. Published by Elsevier Ltd.

Recovery of valuable metals from cathodic active material of spent lithium ion batteries: Leaching and kinetic aspects.

PubMed

Meshram, Pratima; Pandey, B D; Mankhand, T R

2015-11-01

This work is focussed on the processing of cathodic active material of spent lithium ion batteries (LIBs) to ensure resource recovery and minimize environmental degradation. The sulfuric acid leaching of metals was carried out for the recovery of all the valuable metals including nickel and manganese along with the frequently targeted metals like lithium and cobalt. The process parameters such as acid concentration, pulp density, time and temperature for the leaching of metals from the cathode powder containing 35.8% Co, 6.5% Li, 11.6% Mn and 10.06% Ni, were optimized. Results show the optimized leach recovery of 93.4% Li, 66.2% Co, 96.3% Ni and 50.2% Mn when the material was leached in 1M H2SO4 at 368 K and 50 g/L pulp density for 240 min. The need of a reductant for improved recovery of cobalt and manganese has been explained by the thermodynamic analysis (Eh-pH diagram) for these metals. Leaching of the valuable metals was found to follow the logarithmic rate law controlled by surface layer diffusion of the lixiviant reacting with the particles. The mode of leaching of the metals from the spent LIBs was further examined by chemical analysis of the samples at various stage of processing which was further corroborated by characterizing the untreated sample and the leach residues by XRD phase identification and the SEM-EDS studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Proceedings of the Third Airborne Imaging Spectrometer Data Analysis Workshop

NASA Technical Reports Server (NTRS)

Vane, Gregg (Editor)

1987-01-01

Summaries of 17 papers presented at the workshop are published. After an overview of the imaging spectrometer program, time was spent discussing AIS calibration, performance, information extraction techniques, and the application of high spectral resolution imagery to problems of geology and botany.

A Documentary Analysis of HIV/AIDS Education Interventions in Ghana

ERIC Educational Resources Information Center

Halabi, Saamira; Smith, William; Collins, John; Baker, David; Bedford, Jason

2013-01-01

Objective: While the international donor community has spent millions on human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS) prevention through educational programmes, the quality of information in educational curricula is rarely analyzed. This study analyzes the content of prevention programmes, focusing on informational…

Brandishing Cyberattack Capabilities

DTIC Science & Technology

2013-01-01

contribution to the analysis contained in this report made by Roger C. Molander, who passed away on March 25, 2012. Dr. Molan- der spent a full career ...its freelance and “patriotic” hackers). Ironically, moves to legitimize such weapons may make it easier for other countries to take ownership, hence

Spent coffee-based activated carbon: specific surface features and their importance for H2S separation process.

PubMed

Kante, Karifala; Nieto-Delgado, Cesar; Rangel-Mendez, J Rene; Bandosz, Teresa J

2012-01-30

Activated carbons were prepared from spent ground coffee. Zinc chloride was used as an activation agent. The obtained materials were used as a media for separation of hydrogen sulfide from air at ambient conditions. The materials were characterized using adsorption of nitrogen, elemental analysis, SEM, FTIR, and thermal analysis. Surface features of the carbons depend on the amount of an activation agent used. Even though the residual inorganic matter takes part in the H(2)S retention via salt formation, the porous surface of carbons governs the separation process. The chemical activation method chosen resulted in formation of large volume of pores with sizes between 10 and 30Å, optimal for water and hydrogen sulfide adsorption. Even though the activation process can be optimized/changed, the presence of nitrogen in the precursor (caffeine) is a significant asset of that specific organic waste. Nitrogen functional groups play a catalytic role in hydrogen sulfide oxidation. Copyright © 2011 Elsevier B.V. All rights reserved.

Preliminary Analysis of High-Flux RSG-GAS to Transmute Am-241 of PWR’s Spent Fuel in Asian Region

NASA Astrophysics Data System (ADS)

Budi Setiawan, M.; Kuntjoro, S.

2018-02-01

A preliminary study of minor actinides (MA) transmutation in the high flux profile RSG-GAS research reactor was performed, aiming at an optimal transmutation loading for present nuclear energy development. The MA selected in the analysis includes Am-241 discharged from pressurized water reactors (PWRs) in Asian region. Until recently, studies have been undertaken in various methods to reduce radiotoxicity from actinides in high-level waste. From the cell calculation using computer code SRAC2006, it is obtained that the target Am-241 which has a cross section of the thermal energy absorption in the region (group 8) is relatively large; it will be easily burned in the RSG-GAS reactor. Minor actinides of Am-241 which can be inserted in the fuel (B/T fuel) is 2.5 kg which is equivalent to Am-241 resulted from the partition of spent fuel from 2 units power reactors PWR with power 1000MW(th) operated for one year.

Criticality Safety Evaluation Report CSER-96-019 for Spent Nuclear Fuel (SNF) Processing and Storage Facilities Multi Canister Overpack (MCO)

DOE Office of Scientific and Technical Information (OSTI.GOV)

KESSLER, S.F.

This criticality evaluation is for Spent N Reactor fuel unloaded from the existing canisters in both KE and KW Basins, and loaded into multiple canister overpack (MCO) containers with specially built baskets containing a maximum of either 54 Mark IV or 48 Mark IA fuel assemblies. The criticality evaluations include loading baskets into the cask-MCO, operation at the Cold Vacuum Drying Facility,a nd storage in the Canister Storage Building. Many conservatisms have been built into this analysis, the primary one being the selection of the K{sub eff} = 0.95 criticality safety limit. This revision incorporates the analyses for the sampling/weldmore » station in the Canister Storage Building and additional analysis of the MCO during the draining at CVDF. Additional discussion of the scrap basket model was added to show why the addition of copper divider plates was not included in the models.« less

10 CFR 51.23 - Temporary storage of spent fuel after cessation of reactor operation-generic determination of no...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Temporary storage of spent fuel after cessation of reactor... Procedures § 51.23 Temporary storage of spent fuel after cessation of reactor operation—generic determination... necessary, spent fuel generated in any reactor can be stored safely and without significant environmental...

10 CFR 51.23 - Temporary storage of spent fuel after cessation of reactor operation-generic determination of no...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Temporary storage of spent fuel after cessation of reactor... Procedures § 51.23 Temporary storage of spent fuel after cessation of reactor operation—generic determination... necessary, spent fuel generated in any reactor can be stored safely and without significant environmental...

40 CFR 180.1325 - Heat-killed Burkholderia spp. strain A396 cells and spent fermentation media exemption from the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... A396 cells and spent fermentation media exemption from the requirement of a tolerance. 180.1325 Section...-killed Burkholderia spp. strain A396 cells and spent fermentation media exemption from the requirement of...-killed Burkholderia spp. strain A396 cells and spent fermentation media in or on all food commodities...

Impact of Distillery Spent Wash Irrigation on Agricultural Soil

NASA Astrophysics Data System (ADS)

Jadhav, Ramanand N.; Sarode, Dhananjay B.; Narkhede, Sachin D.; Khatik, Vasimshaikh A.; Attarde, Sanjay B.

2011-07-01

The disposal of wastes from industrial sources is becoming a serious problem throughout the world. In India, a total of approximately 40 million m3 of distillery spent wash is generated annually from 295 distilleries. The distillery spent wash is acidic and high levels of biological oxygen demand and chemical oxygen demand and contains nutrient elements such as potassium (K), nitrogen (N), and phosphorous (P). It is used as a source of plant nutrients and organic matter for various agricultural crops. It is usually applied to arable land near the distilleries as irrigation water or as a soil amendment. However, indiscriminate disposal of it has resulted in adverse impact on soil environments. This paper aims to identify the impact of distillery spent wash application for irrigation and on soil environment. The distillery spent wash can be a good source of nutrients necessary for plant growth. Application of various concentrations of spent wash on plant species was studied. A plot having 20-30% concentration of spent wash observed good growth. At higher doses, spent wash application is found harmful to crop growth and soil fertility and its use at lower doses remarkably improves germination and growth of crops.

Dynamic analysis environment for nuclear forensic analyses

NASA Astrophysics Data System (ADS)

Stork, C. L.; Ummel, C. C.; Stuart, D. S.; Bodily, S.; Goldblum, B. L.

2017-01-01

A Dynamic Analysis Environment (DAE) software package is introduced to facilitate group inclusion/exclusion method testing, evaluation and comparison for pre-detonation nuclear forensics applications. Employing DAE, the multivariate signatures of a questioned material can be compared to the signatures for different, known groups, enabling the linking of the questioned material to its potential process, location, or fabrication facility. Advantages of using DAE for group inclusion/exclusion include built-in query tools for retrieving data of interest from a database, the recording and documentation of all analysis steps, a clear visualization of the analysis steps intelligible to a non-expert, and the ability to integrate analysis tools developed in different programming languages. Two group inclusion/exclusion methods are implemented in DAE: principal component analysis, a parametric feature extraction method, and k nearest neighbors, a nonparametric pattern recognition method. Spent Fuel Isotopic Composition (SFCOMPO), an open source international database of isotopic compositions for spent nuclear fuels (SNF) from 14 reactors, is used to construct PCA and KNN models for known reactor groups, and 20 simulated SNF samples are utilized in evaluating the performance of these group inclusion/exclusion models. For all 20 simulated samples, PCA in conjunction with the Q statistic correctly excludes a large percentage of reactor groups and correctly includes the true reactor of origination. Employing KNN, 14 of the 20 simulated samples are classified to their true reactor of origination.

"Who Does She Think She Is?"--Vernacular Medium and Failed Romance

ERIC Educational Resources Information Center

Sandhu, Priti

2014-01-01

Through a close analysis of an Indian woman's unsuccessful romance narrative, this article examines how class-based ideologies and prejudices concerning English and vernacular medium education sustain and perpetuate dismissive and disparaging attitudes toward people educated in the vernacular. The analysis utilizes theoretical understandings of…

Space domain analysis of micro-IDG structure

NASA Astrophysics Data System (ADS)

Izzat, Narian; Pennock, Steve R.; Rozzi, Tullio

1994-06-01

The Microstrip Loaded Inset Dielectric Waveguide has been proposed as a transmission medium alternative to microstrip, and as a useful antenna medium at X-band and millimetric frequencies. In the present analysis we consider the case where a multi-layer, multi-conductor microstrip circuit may be housed within Inset Dielectric Waveguide.

A spent coffee grounds based biorefinery for the production of biofuels, biopolymers, antioxidants and biocomposites.

PubMed

Karmee, Sanjib Kumar

2018-02-01

Spent coffee grounds are composed of lipid, carbohydrates, carbonaceous, and nitrogen containing compounds among others. Using n-hexane and n-hexane/isopropanol mixture highest oil yield was achived during soxhlet extraction of oil from spent coffee grounds. Alternatively, supercritical carbon dioxide can be employed as a green solvent for the extraction of oil. Using advanced chemical and biotechnological methods, spent coffee grounds are converted to various biofuels such as, biodiesel, renewable diesel, bioethanol, bioethers, bio-oil, biochar, and biogas. The in-situ transesterification of spent coffee grounds was carried out in a large scale (4 kg), which led to 80-83% biodiesel yield. In addition, a large number of value added and diversified products viz. polyhydroxyalkanoates, biosorbent, activated carbon, polyol, polyurethane foam, carotenoid, phenolic antioxidants, and green composite are obtained from spent coffee grounds. The principles of circular economy are applied to develop a sustanaible biorefinery based on valorisation of spent coffee grounds. Copyright © 2017 Elsevier Ltd. All rights reserved.

Two-step sequential pretreatment for the enhanced enzymatic hydrolysis of coffee spent waste.

PubMed

Ravindran, Rajeev; Jaiswal, Swarna; Abu-Ghannam, Nissreen; Jaiswal, Amit K

2017-09-01

In the present study, eight different pretreatments of varying nature (physical, chemical and physico-chemical) followed by a sequential, combinatorial pretreatment strategy was applied to spent coffee waste to attain maximum sugar yield. Pretreated samples were analysed for total reducing sugar, individual sugars and generation of inhibitory compounds such as furfural and hydroxymethyl furfural (HMF) which can hinder microbial growth and enzyme activity. Native spent coffee waste was high in hemicellulose content. Galactose was found to be the predominant sugar in spent coffee waste. Results showed that sequential pretreatment yielded 350.12mg of reducing sugar/g of substrate, which was 1.7-fold higher than in native spent coffee waste (203.4mg/g of substrate). Furthermore, extensive delignification was achieved using sequential pretreatment strategy. XRD, FTIR, and DSC profiles of the pretreated substrates were studied to analyse the various changes incurred in sequentially pretreated spent coffee waste as opposed to native spent coffee waste. Copyright © 2017 Elsevier Ltd. All rights reserved.

Time-motion analysis as a novel approach for evaluating the impact of environmental heat exposure on labor loss in agriculture workers

PubMed Central

Ioannou, Leonidas G.; Tsoutsoubi, Lydia; Samoutis, George; Bogataj, Lucka Kajfez; Kenny, Glen P.; Kjellstrom, Tord

2017-01-01

ABSTRACT Introduction: In this study we (i) introduced time-motion analysis for assessing the impact of workplace heat on the work shift time spent doing labor (WTL) of grape-picking workers, (ii) examined whether seasonal environmental differences can influence their WTL, and (iii) investigated whether their WTL can be assessed by monitoring productivity or the vineyard manager's estimate of WTL. Methods: Seven grape-picking workers were assessed during the summer and/or autumn via video throughout four work shifts. Results: Air temperature (26.8 ± 4.8°C), wet bulb globe temperature (WBGT; 25.2 ± 4.1°C), universal thermal climate index (UTCI; 35.2 ± 6.7°C), and solar radiation (719.1 ± 187.5 W/m2) were associated with changes in mean skin temperature (1.7 ± 1.8°C) (p < 0.05). Time-motion analysis showed that 12.4% (summer 15.3% vs. autumn 10.0%; p < 0.001) of total work shift time was spent on irregular breaks (WTB). There was a 0.8%, 0.8%, 0.6%, and 2.1% increase in hourly WTB for every degree Celsius increase in temperature, WBGT, UTCI, and mean skin temperature, respectively (p < 0.01). Seasonal changes in UTCI explained 64.0% of the seasonal changes in WTL (p = 0.017). Productivity explained 36.6% of the variance in WTL (p < 0.001), while the vineyard manager's WTL estimate was too optimistic (p < 0.001) and explained only 2.8% of the variance in the true WTL (p = 0.456). Conclusion: Time-motion analysis accurately assesses WTL, evaluating every second spent by each worker during every work shift. The studied grape-picking workers experienced increased workplace heat, leading to significant labor loss. Monitoring productivity or the vineyard manager's estimate of each worker's WTL did not completely reflect the true WTL in these grape-picking workers. PMID:28944274

40 CFR 420.91 - Specialized definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... from spent pickling acid solutions. (h) The term acid regeneration means those hydrochloric acid... regeneration processes. (j) The term spent acid solution (or spent pickle liquor) means those solutions of...

40 CFR 420.91 - Specialized definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... from spent pickling acid solutions. (h) The term acid regeneration means those hydrochloric acid... regeneration processes. (j) The term spent acid solution (or spent pickle liquor) means those solutions of...

Clean image synthesis and target numerical marching for optical imaging with backscattering light

PubMed Central

Pu, Yang; Wang, Wubao

2011-01-01

Scanning backscattering imaging and independent component analysis (ICA) are used to probe targets hidden in the subsurface of a turbid medium. A new correction procedure is proposed and used to synthesize a “clean” image of a homogeneous host medium numerically from a set of raster-scanned “dirty” backscattering images of the medium with embedded targets. The independent intensity distributions on the surface of the medium corresponding to individual targets are then unmixed using ICA of the difference between the set of dirty images and the clean image. The target positions are localized by a novel analytical method, which marches the target to the surface of the turbid medium until a match with the retrieved independent component is accomplished. The unknown surface property of the turbid medium is automatically accounted for by this method. Employing clean image synthesis and target numerical marching, three-dimensional (3D) localization of objects embedded inside a turbid medium using independent component analysis in a backscattering geometry is demonstrated for the first time, using as an example, imaging a small piece of cancerous prostate tissue embedded in a host consisting of normal prostate tissue. PMID:21483608

40 CFR 420.91 - Specialized definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... unreacted acid from spent pickling acid solutions. (h) The term acid regeneration means those hydrochloric... recovery or acid regeneration processes. (j) The term spent acid solution (or spent pickle liquor) means...

Ultraviolet light-emitting diodes in water disinfection.

PubMed

Vilhunen, Sari; Särkkä, Heikki; Sillanpää, Mika

2009-06-01

The novel system of ultraviolet light-emitting diodes (UV LEDs) was studied in water disinfection. Conventional UV lamps, like mercury vapor lamp, consume much energy and are considered to be problem waste after use. UV LEDs are energy efficient and free of toxicants. This study showed the suitability of LEDs in disinfection and provided information of the effect of two emitted wavelengths and different test mediums to Escherichia coli destruction. Common laboratory strain of E. coli (K12) was used and the effects of two emitted wavelengths (269 and 276 nm) were investigated with two photolytic batch reactors both including ten LEDs. The effects of test medium were examined with ultrapure water, nutrient and water, and nutrient and water with humic acids. Efficiency of reactors was almost the same even though the one emitting higher wavelength had doubled optical power compared to the other. Therefore, the effect of wavelength was evident and the radiation emitted at 269 nm was more powerful. Also, the impact of background was studied and noticed to have only slight deteriorating effect. In the 5-min experiment, the bacterial reduction of three to four log colony-forming units (CFU) per cubic centimeter was achieved, in all cases. When turbidity of the test medium was greater, part of the UV radiation was spent on the absorption and reactions with extra substances on liquid. Humic acids can also coat the bacteria reducing the sensitivity of the cells to UV light. The lower wavelength was distinctly more efficient when the optical power is considered, even though the difference of wavelengths was small. The reason presumably is the greater absorption of DNA causing more efficient bacterial breakage. UV LEDs were efficient in E. coli destruction, even if LEDs were considered to have rather low optical power. The effect of wavelengths was noticeable but the test medium did not have much impact. This study found UV LEDs to be an optimal method for bacterial disinfection. The emitted wavelength was found to be an essential factor when using LEDs; thus, care should be taken in selecting the proper LED for maximum disinfection.

Spent nuclear fuel dry transfer system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, L.; Agace, S.

The U.S. Department of Energy is currently engaged in a cooperative program with the Electric Power Research Institute (EPRI) to design a spent nuclear fuel dry transfer system (DTS). The system will enable the transfer of individual spent nuclear fuel assemblies between a conventional top loading cask and multi-purpose canister in a shielded overpack, or accommodate spent nuclear fuel transfers between two conventional casks.

False Starts and Half-steps at Doing Open Science in the Monitoring of Aquatic Ecosystems

EPA Science Inventory

A great deal of effort is spent monitoring aquatic ecosystems by ecologists in academia, agencies, the private sector and non-governmental organizations. Showing the purpose, design, collection, and analysis of such monitoring efforts and providing access to the monitoring data ...

Microcomputers: Software Evaluation. Evaluation Guides. Guide Number 17.

ERIC Educational Resources Information Center

Gray, Peter J.

This guide discusses three critical steps in selecting microcomputer software and hardware: setting the context, software evaluation, and managing microcomputer use. Specific topics addressed include: (1) conducting an informal task analysis to determine how the potential user's time is spent; (2) identifying tasks amenable to computerization and…

Personal carbon monoxide exposure in Helsinki, Finland

NASA Astrophysics Data System (ADS)

Scotto di Marco, Greta; Kephalopoulos, Stylianos; Ruuskanen, Juhani; Jantunen, Matti

Personal exposure concentrations of carbon monoxide (CO) were measured for the adult urban population of Helsinki, Finland, as part of the multi-centre European EXPOLIS study. The arithmetic mean of the 48 h average personal CO exposure concentration was 1.3 mg m -3 for participants not exposed to environmental tobacco smoke (ETS) and 1.6 mg m -3 for those exposed to ETS at any time and in any microenvironment. The maximum 8 and 1 h exposure values were 2.0 and 2.6 mg m -3, and 4.3 and 5.7 mg m -3, respectively. As tobacco smoke is one of the major sources of CO, therefore the personal mean exposures of ETS participants were higher than the non-ETS participants for all averaging times. The long- and short-term personal exposures were higher in winter than in summer for all participants. In order to analyse in more detail the correlation between the time-activity patterns and exposure levels, cluster analysis was performed using 24 h personal exposure profiles of 1 h moving averages. The results showed clearly that the major source of CO for non-ETS exposed participants are traffic emissions. The majority of the diurnal exposure profiles showed two notable exposure peaks corresponding to the morning and evening traffic rush hours. The time spent in street traffic was the most relevant factor for describing the short-term personal exposures. The more time was spent commuting by car the higher were the exposures. The long-term exposure levels were linked both to the time spent commuting and home location. People living in low-traffic suburban areas and working in downtown spent more time commuting and ended up experiencing similar long-term exposure levels than people who lived in heavy-traffic downtown areas, but spent little time commuting. For ETS exposed participants the personal exposure profiles were dominated by both tobacco smoke and traffic emissions.

Evaluation and Parameter Analysis of Burn up Calculations for the Assessment of Radioactive Waste - 13187

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fast, Ivan; Aksyutina, Yuliya; Tietze-Jaensch, Holger

2013-07-01

Burn up calculations facilitate a determination of the composition and nuclear inventory of spent nuclear fuel, if operational history is known. In case this information is not available, the total nuclear inventory can be determined by means of destructive or, even on industrial scale, nondestructive measurement methods. For non-destructive measurements however only a few easy-to-measure, so-called key nuclides, are determined due to their characteristic gamma lines or neutron emission. From these measured activities the fuel burn up and cooling time are derived to facilitate the numerical inventory determination of spent fuel elements. Most regulatory bodies require an independent assessment ofmore » nuclear waste properties and their documentation. Prominent part of this assessment is a consistency check of inventory declaration. The waste packages often contain wastes from different types of spent fuels of different history and information about the secondary reactor parameters may not be available. In this case the so-called characteristic fuel burn up and cooling time are determined. These values are obtained from a correlations involving key-nuclides with a certain bandwidth, thus with upper and lower limits. The bandwidth is strongly dependent on secondary reactor parameter such as initial enrichment, temperature and density of the fuel and moderator, hence the reactor type, fuel element geometry and plant operation history. The purpose of our investigation is to look into the scaling and correlation limitations, to define and verify the range of validity and to scrutinize the dependencies and propagation of uncertainties that affect the waste inventory declarations and their independent verification. This is accomplished by numerical assessment and simulation of waste production using well accepted codes SCALE 6.0 and 6.1 to simulate the cooling time and burn up of a spent fuel element. The simulations are benchmarked against spent fuel from the real reactor Obrigheim in Germany for which sufficiently precise experimental reference data are available. (authors)« less

77 FR 76952 - Rescinding Spent Fuel Pool Exclusion Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... [Docket No. PRM-51-29; NRC-2012-0215] Rescinding Spent Fuel Pool Exclusion Regulations AGENCY: Nuclear... NRC institute a rulemaking to rescind the regulations excluding consideration of spent fuel pool...

Utilization of the Differential Die-Away Self-Interrogation Technique for Characterization and Verification of Spent Nuclear Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trahan, Alexis Chanel

New nondestructive assay techniques are sought to better characterize spent nuclear fuel. One of the NDA instruments selected for possible deployment is differential die-away self-interrogation (DDSI). The proposed DDSI approach for spent fuel assembly assay utilizes primarily the spontaneous fission and (α, n) neutrons in the assemblies as an internal interrogating radiation source. The neutrons released in spontaneous fission or (α,n) reactions are thermalized in the surrounding water and induce fission in fissile isotopes, thereby creating a measurable signal from isotopes of interest that would be otherwise difficult to measure. The DDSI instrument employs neutron coincidence counting with 3He tubesmore » and list-mode-based data acquisition to allow for production of Rossi-alpha distributions (RADs) in post-processing. The list-mode approach to data collection and subsequent construction of RADs has expanded the analytical possibilities, as will be demonstrated throughout this thesis. One of the primary advantages is that the measured signal in the form of a RAD can be analyzed in its entirety including determination of die-away times in different time domains. This capability led to the development of the early die-away method, a novel leakage multiplication determination method which is tested throughout the thesis on different sources in simulation space and fresh fuel experiments. The early die-away method is a robust, accurate, improved method of determining multiplication without the need for knowledge of the (α,n) source term. The DDSI technique and instrument are presented along with the many novel capabilities enabled by and discovered through RAD analysis. Among the new capabilities presented are the early die-away method, total plutonium content determination, and highly sensitive missing pin detection. Simulation of hundreds of different spent and fresh fuel assemblies were used to develop the analysis algorithms and the techniques were tested on a variety of spontaneous fission-driven fresh fuel assemblies at Los Alamos National Laboratory and the BeRP ball at the Nevada National Security Site. The development of the new, improved analysis and characterization methods with the DDSI instrument makes it a viable technique for implementation in a facility to meet material control and safeguards needs.« less

Method for producing hydrocarbon fuels and fuel gas from heavy polynuclear hydrocarbons by the use of molten metal halide catalysts

DOEpatents

Gorin, Everett

1979-01-01

In a process for hydrocracking heavy polynuclear carbonaceous feedstocks to produce lighter hydrocarbon fuels by contacting the heavy feedstocks with hydrogen in the presence of a molten metal halide catalyst in a hydrocracking zone, thereafter separating at least a major portion of the lighter hydrocarbon fuels from the spent molten metal halide and thereafter regenerating the spent molten metal halide by incinerating the spent molten metal halide by combustion of carbon and sulfur compounds in the spent molten metal halide in an incineration zone, the improvement comprising: (a) contacting the heavy feedstocks and hydrogen in the presence of the molten metal halide in the hydrocracking zone at reaction conditions effective to convert from about 60 to about 90 weight percent of the feedstock to lighter hydrocarbon fuels; (b) separating at least a major portion of the lighter hydrocarbon fuels from the spent molten metal halide; (c) contacting the spent molten metal halide with oxygen in a liquid phase gasification zone at a temperature and pressure sufficient to vaporize from about 25 to about 75 weight percent of the spent metal halide, the oxygen being introduced in an amount sufficient to remove from about 60 to about 90 weight percent of the carbon contained in the spent molten metal halide to produce a fuel gas and regenerated metal halide; and (d) incinerating the spent molten metal halide by combusting carbon and sulfur compounds contained therein.

Review and analysis of potential safety impacts of and regulatory barriers to fuel efficiency technologies and alternative fuels in medium- and heavy-duty vehicles

DOT National Transportation Integrated Search

2015-06-01

This report summarizes a safety analysis of medium- and heavy-duty vehicles (MD/HDVs) equipped with fuel efficiency (FE) technologies and/or using alternative fuels (natural gas-CNG and LNG, propane, biodiesel and power train electrification). The st...

Relationships between sleeping habits, sedentary leisure activities and childhood overweight and obesity.

PubMed

Busto-Zapico, Raquel; Amigo-Vázquez, Isaac; Peña-Suárez, Elsa; Fernández-Rodríguez, Concepción

2014-01-01

The aim of this study is to show how sedentary leisure activities and a decrease in hours of sleep interact to lead to an increase in the body mass index (BMI) in children. A random sample of 291 nine-year-old and ten-year-old schoolchildren from Asturias (Spain) was taken. A cross-sectional design was used, the children's weight and height were measured and an individual interview was carried out. Using path analysis, a model was tested in which bedtime, the number of hours spent sleeping and sedentary leisure activities were the independent variables and the BMI was the dependent variable. The results show that sedentary leisure activities and hours spent sleeping are predictors of a greater BMI in children. Moreover, the effect of the time spent sleeping is mediated by sedentary leisure activities. That is to say, it is those children who go to bed late and who use that extra time to watch the television or play with the computer that tend to have a greater BMI. Attention should be drawn to the importance of this fact and to the implications it may have for education and children's health.