Structure des fluides de bâtonnets polaires et polarisables dans l'approximation des chaînes hypertressées avec amplification du potentiel répulsif. Un modèle simple d'acétonitrile liquide.

NASA Astrophysics Data System (ADS)

Salamito, B.; Fries, P. H.

1991-07-01

We study fluids of rigid rods which are generated by a distribution of line sites and which carry a polarizable electric point dipole at their centre. We examine the difficulties for solving the integral equations, which result from truncating the rotational invariant expansion of the usual intermolecular rapidly varying shape potentials. In order to overcome these convergence problems, soft shape potentials are used in addition to an approximation HNCAR, of the hypernetted chain (HNC) type, which Amplifies these soft Repulsive effects. The polarization due to all the molecules is treated at a self-consistent mean field level. This formalism is applied to a model of liquid acetonitrile at 291K. The Kirkwood factors, the dielectric constant, and the cross sections of neutron or X-rays diffraction studies are in good agreement with experiment. This justifies the theoretical molecular pair distribution, from which the local molecular order is carefully analyzed. On étudie des fluides de bâtonnets rigides engendrés par une distribution de sites alignés et portant en leur centre un dipôle électrique ponctuel polarisable. On examine les difficultés de résolution des équations intégrales liées à la troncature du développement en invariants rotationnels des potentiels de forme intermoléculaires usuels à variation rapide. Pour contourner ces problèmes de convergence on utilise des potentiels de forme molle combinés à une approximation HNCAR, du type des chaînes hypertressées (HNC), qui Amplifie ces effets Répulsifs mous. On traite la polarisation due à l'ensemble des molécules par une approximation auto-cohérente de champ moyen. On applique ce formalisme à un modèle d'acétonitrile liquide à 291K. Les facteurs de Kirkwood, la constante diélectrique et les sections efficaces de diffusion des neutrons ou des rayons X calculés sont en bon accord avec l'expérience. Ceci justifie la distribution théorique de paires de molécules à partir de laquelle on analyse en détail l'ordre moléculaire local.

Fissuration d'un composite a matrice ceramique dans une application de piece statique de turbine a gaz

NASA Astrophysics Data System (ADS)

Lebel, Larry

Une procedure experimentale a ete developpee pour caracteriser les mecanismes de deterioration et la durabilite de materiaux composites a matrice ceramique (CMC) dans une application de piece statique de turbine a gaz. Tandis que la plupart des essais de caracterisation publies sur les materiaux CMC ont ete realises sous des conditions de chargement controle, la presente recherche tente de reproduire la relaxation des contraintes qui se produit normalement dans une piece statique a haute temperature. Dans l'experience proposee, un echantillon planaire de forme haltere est chauffe de facon cyclique sur une de ses faces et refroidi sur l'autre, tout en etant contraint dans ses deplacements. La contrainte de flexion resultante au centre de l'echantillon, mesuree par une cellule de charge, correspond a la contrainte de flexion qui a ete prealablement predite au centre des panneaux d'une chambre a combustion generique. Un materiau CMC multicouche compose d'une matrice d'alumine poreuse et de fibres NextelMD 720 a ete utilise pour developper l'experience. Des essais de calibration ont d'abord ete realises en utilisant un systeme de chauffage par lampe infrarouge, atteignant jusqu'a 1160 °C a la surface de l'echantillon. Un systeme laser au CO2 a par la suite ete utilise pour realiser des essais de deterioration a haute puissance, atteignant en fin d'essai des temperatures de surface excedant la limite de 1200 °C du materiau et des differences de temperature a travers l'epaisseur de plus de 1000 °C. Sous la puissance de chauffage imposee a amplitude constante, l'accumulation de dommage a fait en sorte d'augmenter la temperature en surface et les gradients de temperature a travers le materiau. Une reduction de la contrainte dans le temps a ete observee a cause du fluage, de la fissuration et de la delamination du materiau sous la condition de confinement du deplacement, menant a une stabilisation du niveau de dommage a une certaine profondeur dependant de la contrainte thermique initiale. La procedure de caracterisation developpee s'avere etre un outil prometteur pour developper de nouveaux types de materiaux, de meme que pour comparer la durabilite de materiaux existants sous des conditions representatives de pieces statiques de turbine a gaz. None

Proprietes ionochromes et photochromes de derives du polythiophene

NASA Astrophysics Data System (ADS)

Levesque, Isabelle

La synthese et la caracterisation de derives regioreguliers du polythiophene ont ete effectuees en solution et sur des films minces. La spectroscopie UV-visible de ces derives a permis de constater qu'ils peuvent posseder des proprietes chromiques particulieres selon le stimulus auquel ils sont soumis. Par exemple, une augmentation de la temperature permet en effet aux polymeres de passer d'une couleur violette a jaune, et ce, a l'etat solide aussi bien qu'en solution. Ces proprietes chromiques semblent regies par une transition conformationnelle (plane a non-plane) de la chaine principale. Ce travail avait pour but de mieux comprendre l'influence de l'organisation des chaines laterales sur les transitions chromiques. Deux derives synthetises possedant des chaines laterales sensibles aux cations alcalins se sont averes etre ionochromes en plus d'etre thermochromes. Il s'agit d'un polymere comportant des chaines laterales de type oligo(oxyethylene) et d'un autre comportant un groupement ether couronne specifique aux ions lithium. Les effets chromiques observes sont expliques par des interactions non-covalentes des cations avec les atomes d'oxygene des chaines laterales dans le cas du premier polymere, et par l'insertion de l'ion Li + dans la cavite de l'ether couronne dans le cas du second polymere. Ces interactions semblent provoquer une diminution de l'organisation induisant ainsi une torsion de la chaine principale. Les deux polymeres semblent specifiques a certains cations et pourraient donc servir comme detecteurs optiques. La specificite aux ions Li+ du second polymere pourrait aussi permettre la conduction ionique, en plus de la conductivite electronique caracteristique des polythiophenes, ce qui pourrait s'averer utile dans le cas de batteries legeres entierement faites de polymeres et de sels de lithium. D'autres derives comportant des chaines laterales de type azobenzene se sont averes etre photochromes en plus d'etre thermochromes. Le groupement lateral a la possibilite de changer de configuration de la forme trans a la forme cis lorsqu'il est soumis a une irradiation dans le domaine de l'ultraviolet ce qui provoque, selon toute evidence, un effet marque sur l'organisation des chaines laterales. Cela induit alors une torsion de la chaine principale thiophene entrainant une diminution de conjugaison marquee. Ces effets peuvent etre exploites entre autres dans l'ecriture optique. Il s'est avere que le polymere irradie peu conjugue peut etre force a retourner a son etat initial conjugue tres rapidement par un traitement electrochimique simple. En conclusion, on a pu prouver qu'une modification dans l'organisation des chaines laterales par un stimulus exterieur affecte considerablement la conformation de la chaine principale. Cela porte a croire que les chaines laterales stabilisent une conformation particuliere des polythiophenes.

Caractérisation des paragenèses et des paléocirculations fluides dans l'indice d'or de Bleïda (Anti-Atlas, Maroc)Characterization of the paragenesis and the fluid palaeo-circulations in the gold showings of Bleida (Anti-Atlas, Morocco)

NASA Astrophysics Data System (ADS)

Barakat, Ahmed; Marignac, Christian; Boiron, Marie-Christine; Bouabdelli, Mohamed

2002-01-01

The gold showings at Bleida are hosted in Late Pan-African N50-80 °E quartz-hematite-chlorite 1 tension lenses that are related to the activity of major sinistral sub-east-west thrusts. Ores result from three superimposed stages of fluid migration. Gold occurs in microcracks offsetting the earlier minerals. Fluids evolved from COHN compositions with a saline component to boiling aqueous fluids. Pressure and temperature decreased from 50 MPa and 300 °C to less than 4 MPa and 150 °C. Thus, the gold showings at Bleida were formed in a typical geothermal (epithermal) setting, likely controlled by the Late Pan-African magmatism. To cite this article: A. Barakat et al., C. R. Geoscience 334 (2002) 35-41

Fluid Dynamics Problems of Vehicles Operating Near or in the Air-Sea Interface (Problemes de Dynamique des Fluides des Vehicules Evoluant dans ou pres de L’interface Air-Mer).

DTIC Science & Technology

1999-02-01

articulated rotor systems, the rotor blade can deflect several feet and contact the fuselage of the helicopter, resulting in a "tunnel strike " in...tandem rotor configurations; or the tailboom, resulting in a "tailboom strike " in single rotor configurations. The H-46 Sea Knight, a tandem rotor...helicopter used by the U.S. Navy and Marines, has encountered over 100 tunnel strikes since 1964 and still occasionally experiences them. Most tunnel

Numerical Simulation of Adaptive Control Applicaton to Unstable Solid Rocket Motors

DTIC Science & Technology

2001-06-01

la Technologie des Lanceurs "Vi- Sciences Meeting & Exhibit, Reno, Jan. 15-18. bration des Lanceurs , Toulouse", 1999. AIAA Paper 96-0759, 1996. 7-8...Schmidt. Some recent de- in the presence of pipeline acoustic resonance. velopments in numerical methods for transonic J. Fluids and Structures ., 5:207

Reconstruction de la surface de Fermi dans l'etat normal d'un supraconducteur a haute Tc: Une etude du transport electrique en champ magnetique intense

NASA Astrophysics Data System (ADS)

Le Boeuf, David

Des mesures de resistance longitudinale et de resistance de Hall en champ magnetique intense transverse (perpendiculaire aux plans CuO2) ont ete effectuees au sein de monocristaux de YBa2Cu3Oy (YBCO) demacles, ordonnes et de grande purete, afin d'etudier l'etat fondamental des supraconducteurs a haute Tc dans le regime sous-dope. Cette etude a ete realisee en fonction du dopage et de l'orientation du courant d'excitation J par rapport a l'axe orthorhombique b de la structure cristalline. Les mesures en champ magnetique intense revelent par suppression de la supraconductivite des oscillations magnetiques des resistances longitudinale et de Hall dans YBa2Cu 3O6.51 et YBa2Cu4O8. La conformite du comportement de ces oscillations quantiques au formalisme de Lifshitz-Kosevich, apporte la preuve de l'existence d'une surface de Fermi fermee a caractere quasi-2D, abritant des quasiparticules coherentes respectant la statistique de Fermi-Dirac, dans la phase pseudogap d'YBCO. La faible frequence des oscillations quantiques, combinee avec l'etude de la partie monotone de la resistance de Hall en fonction de la temperature indique que la surface de Fermi d'YBCO sous-dope comprend une petite poche de Fermi occupee par des porteurs de charge negative. Cette particularite de la surface de Fermi dans le regime sous-dope incompatible avec les calculs de structure de bande est en fort contraste avec la structure electronique presente dans le regime surdope. Cette observation implique ainsi l'existence d'un point critique quantique dans le diagramme de phase d'YBCO, au voisinage duquel la surface de Fermi doit subir une reconstruction induite par l'etablissement d'une brisure de la symetrie de translation du reseau cristallin sous-jacent. Enfin, l'etude en fonction du dopage de la resistance de Hall et de la resistance longitudinale en champ magnetique intense suggere qu'un ordre du type onde de densite (DW) est responsable de la reconstruction de la surface de Fermi. L'analogie de la phenomenologie entourant le comportement des resistances longitudinale et de Hall dans YBa2Cu3Oy, avec des systemes dans lesquels l'existence d'un ordre du type DW est etablie, notamment des cuprates a structure tetragonale a basse temperature ("Low Temperature Tetragonal", LTT), indique que l'ordre causant la reconstruction de la surface de Fermi est stabilise au voisinage du dopage p = 1/8, et est en competition directe avec la supraconductivite.

Gas phase synthesis of core-shell Fe@FeO x magnetic nanoparticles into fluids

NASA Astrophysics Data System (ADS)

Aktas, Sitki; Thornton, Stuart C.; Binns, Chris; Denby, Phil

2016-12-01

Sorbitol, short chain molecules, have been used to stabilise of Fe@FeO x nanoparticles produced in the gas phase under the ultra-high vacuum (UHV) conditions. The sorbitol coated Fe@FeO x nanoparticles produced by our method have a narrow size distribution with a hydrodynamic diameter of 35 nm after NaOH is added to the solution. Magnetisation measurement shows that the magnetic nanoparticles are superparamagnetic at 100 K and demonstrate hysteresis at 5 K with an anisotropy constant of 5.31 × 104 J/m3 (similar to bulk iron). Also, it is shown that sorbitol is only suitable for stabilising the Fe@FeO x suspensions, and it does not prevent further oxidation of the metallic Fe core. According to MRI measurement, the nanoparticles have a high transverse relaxation rate of 425 mM-1 s-1.

Parenteral oil-based drospirenone microcrystal suspensions-evaluation of physicochemical stability and influence of stabilising agents.

PubMed

Nippe, Stefanie; General, Sascha

2011-09-15

Drospirenone (DRSP) is a contraceptive drug substance with challenging physicochemical properties, due to insufficient solubility in aqueous and oil-based vehicles as well as low chemical stability in aqueous fluids. Although it is one of the most popular orally used progestins, no parenteral long-acting contraceptive containing the drug substance is marketed. An oil-based DRSP microcrystal suspension (MCS) might be an attractive formulation option. The main focus of this study was to investigate the physicochemical stability of such preparations. Moreover, syringeability and injectability via autoinjector were analysed using a materials testing machine. A high chemical stability of DRSP was found in oil-based vehicles. Span(®) 83, cholesteryl oleate, lecithin, methyl cholate, Aerosil(®) R972 and 200 Pharma were tested for increasing the physical stability of DRSP dispersions. Changes in viscosity, rheological properties, and solubility were analysed. The intention was to show a stabilising effect of the excipients without increasing viscosity and solubility. To evaluate the physical stability of DRSP MCS with and without addition of stabilising agents, sedimentation and particle growth after storage were examined. Especially, the silica derivatives Aerosil(®) 200 and R972 Pharma influenced the physical stability positively. Copyright © 2011 Elsevier B.V. All rights reserved.

Etude thermo-hydraulique de l'ecoulement du moderateur dans le reacteur CANDU-6

NASA Astrophysics Data System (ADS)

Mehdi Zadeh, Foad

Etant donne la taille (6,0 m x 7,6 m) ainsi que le domaine multiplement connexe qui caracterisent la cuve des reacteurs CANDU-6 (380 canaux dans la cuve), la physique qui gouverne le comportement du fluide moderateur est encore mal connue de nos jours. L'echantillonnage de donnees dans un reacteur en fonction necessite d'apporter des changements a la configuration de la cuve du reacteur afin d'y inserer des sondes. De plus, la presence d'une zone intense de radiations empeche l'utilisation des capteurs courants d'echantillonnage. En consequence, l'ecoulement du moderateur doit necessairement etre etudie a l'aide d'un modele experimental ou d'un modele numerique. Pour ce qui est du modele experimental, la fabrication et la mise en fonction de telles installations coutent tres cher. De plus, les parametres de la mise a l'echelle du systeme pour fabriquer un modele experimental a l'echelle reduite sont en contradiction. En consequence, la modelisation numerique reste une alternative importante. Actuellement, l'industrie nucleaire utilise une approche numerique, dite de milieu poreux, qui approxime le domaine par un milieu continu ou le reseau des tubes est remplace par des resistances hydrauliques distribuees. Ce modele est capable de decrire les phenomenes macroscopiques de l'ecoulement, mais ne tient pas compte des effets locaux ayant un impact sur l'ecoulement global, tel que les distributions de temperatures et de vitesses a proximite des tubes ainsi que des instabilites hydrodynamiques. Dans le contexte de la surete nucleaire, on s'interesse aux effets locaux autour des tubes de calandre. En effet, des simulations faites par cette approche predisent que l'ecoulement peut prendre plusieurs configurations hydrodynamiques dont, pour certaines, l'ecoulement montre un comportement asymetrique au sein de la cuve. Ceci peut provoquer une ebullition du moderateur sur la paroi des canaux. Dans de telles conditions, le coefficient de reactivite peut varier de maniere importante, se traduisant par l'accroissement de la puissance du reacteur. Ceci peut avoir des consequences majeures pour la surete nucleaire. Une modelisation CFD (Computational Fluid Dynamics) detaillee tenant compte des effets locaux s'avere donc necessaire. Le but de ce travail de recherche est de modeliser le comportement complexe de l'ecoulement du moderateur au sein de la cuve d'un reacteur nucleaire CANDU-6, notamment a proximite des tubes de calandre. Ces simulations servent a identifier les configurations possibles de l'ecoulement dans la calandre. Cette etude consiste ainsi a formuler des bases theoriques a l'origine des instabilites macroscopiques du moderateur, c.-a-d. des mouvements asymetriques qui peuvent provoquer l'ebullition du moderateur. Le defi du projet est de determiner l'impact de ces configurations de l'ecoulement sur la reactivite du reacteur CANDU-6.

Effects of postnatal administration of diethylstilbestrol on puberty and thyroid function in male rats.

PubMed

Shin, Jae-Ho; Kim, Tae Sung; Kang, Il Hyun; Kang, Tae Seok; Moon, Hyun Ju; Han, Soon-Young

2009-10-01

To examine the effects of diethylstilbestrol (DES) on male pubertal development and thyroid function, juvenile male Sprague-Dawley rats were given DES daily by oral intubation at doses of 10, 20 and 40 microg/kg/day from postnatal day 33 for 20 days. Prepuce separation was significantly delayed at the dose of 20 microg/kg/day and above in the DES-treated rats. DES treatment induced a significant reduction in the weights of testes, epididymides, the ventral prostate, seminal vesicles plus coagulating glands and fluid, levator ani bulbocavernosus muscles, Cowper's glands and the glans penis. The weights of the liver and adrenals increased in the DES-treated animals. DES caused a dose-dependent reduction in germ cells; in particular the spermatids were mainly affected. The serum levels of testosterone and luteinizing hormone were significantly reduced in the DES-treated groups, but that of estradiol decreased. No differences were observed in the serum thyroxine levels of the control and DES-treated groups. In microscopic observation of the DES-treated animals, degeneration of germ cells and tubular atrophy in the testis were noted, but there were no microscopic changes in the thyroid. These results indicate that DES affected the pubertal development of juvenile male rats and that its mode of action may be related to alterations in hormone levels.

Stabilisation de l'etat de polarisation d'un laser par la conception et fabrication d'un miroir polarisant fait de couches minces nanostructurees

NASA Astrophysics Data System (ADS)

Doucet, Alexandre

Ce manuscrit presente la conception et la fabrication d'un miroir polarisant fabrique avec la methode de deposition par incidence oblique communement appelee en anglais GLAD (GLancing Angle Deposition). Cette methode de deposition par GLAD permet de changer la nanostructure des revetements avec l'inclinaison et la rotation du substrat par rapport au flux de materiau evapore. Ceci nous permet d'ajuster l'indice de refraction et d'obtenir des revetements birefringents avec un materiau intrinsequement isotrope. Puisque l'indice de refraction peut etre change, les miroirs sont fabriques avec un seul materiau contrairement aux methodes usuelles qui necessite deux materiaux. Les proprietes optiques des echantillons sont mesurees avec l'aide de l'ellipsometrie. Des images avec un microscope electronique a balayage par transmission permettent de verifier Ia structure des revetements deposes. Les miroirs sont utilises comme coupleurs de sortie du resonateur d'un laser avec un milieu actif d'(Yb3+0.1 Y 0.9)3Al5O12, ou plus simplement Yb: YAG, pompe optiquement avec une diode laser. Ces cristaux presentent des proprietes optiques interessantes pour leur utilisation comme milieu actif, mais avec une structure cristalline cubique, ils donnent lieu a des faisceaux polarises aleatoirement. Les miroirs que nous fabriquons permettent d'obtenir une emission polarisee lineairement sans avoir a ajouter d'autres elements au resonateur. Les tests sont faits en regime continu et pulse avec un absorbant saturable de Cr : Y AG. Deux materiaux sont etudies, soit le WO3 et le TiO2, et ils nous permettent d'obtenir une emission polarisee lineairement dans le mode TEM 00 avec un rapport d'extinction de 1000 (30 dB), mais seuls les miroirs de TiO2 permettent une emission pulsee periodique avec une densite de puissance crete pres de 700+/-80 MW/cm2. En etudiant le rapport d'extinction en fonction du temps de pompage, nous remarquons que l'etat de polarisation est beaucoup plus stable que celui obtenu avec un miroir isotrope. Des mesures du spectre d'emission avec un spectrometre de haute resolution permettent de constater le caractere multimode longitudinal en regime continu et une emission monomode longitudinale en regime pulse. None None None None None None None None None None None None None None None None None None None None None None None

Introduction to Solid Rocket Propulsion

DTIC Science & Technology

2004-01-01

totally valid. Fluid-“ structure ” coupling: structure is understood here as the assembly of all the solid parts of the motor: restrictors, grain, case...Conference and Exhibit, San Diego, CA, July 12, 1995. ASSM/POP Program [10] Fonctionnement des moteurs à propergol solide segmentés pour lanceurs ...spatiaux, Colloque CNES/ONERA, Châtillon, FR, Dec. 8-9, 1992. [11] Fonctionnement des moteurs à propergol solide segmentés pour lanceurs spatiaux

The Probable Explanation for the Low Friction of Natural Joints.

PubMed

Pawlak, Zenon; Urbaniak, Wieslaw; Hagner-Derengowska, Magdalena; Hagner, Wojciech

2015-04-01

The surface of an articular cartilage, coated with phospholipid (PL) bilayers, plays an important role in its lubrication and movement. Intact (normal) and depleted surfaces of the joint were modelled and the pH influence on the surface interfacial energy, wettability and friction were investigated. In the experiments, the deterioration of the PL bilayer was controlled by its wettability and the applied friction. The surrounding fluid of an undamaged articular cartilage, the synovial fluid, has a pH value of approximately 7.4. Buffer solutions were formulated to represent the synovial fluid with various pH values. It was found that the surface interfacial energy was stabilised at its lowest values when the pH varied between 6.5 and 9.5. These results suggested that as the PL bilayers deteriorated, the hydration repulsion mechanism became less effective as friction increased. The decreased number of bilayers changed the wettability and lowered PL lubricant properties.

The use of laboratory experiments for the study of conservative solute transport in heterogeneous porous media

NASA Astrophysics Data System (ADS)

Silliman, S. E.; Zheng, L.; Conwell, P.

Laboratory experiments on heterogeneous porous media (otherwise known as intermediate scale experiments, or ISEs) have been increasingly relied upon by hydrogeologists for the study of saturated and unsaturated groundwater systems. Among the many ongoing applications of ISEs is the study of fluid flow and the transport of conservative solutes in correlated permeability fields. Recent advances in ISE design have provided the capability of creating correlated permeability fields in the laboratory. This capability is important in the application of ISEs for the assessment of recent stochastic theories. In addition, pressure-transducer technology and visualization methods have provided the potential for ISEs to be used in characterizing the spatial distributions of both hydraulic head and local water velocity within correlated permeability fields. Finally, various methods are available for characterizing temporal variations in the spatial distribution (and, thereby, the spatial moments) of solute concentrations within ISEs. It is concluded, therefore, that recent developments in experimental techniques have provided an opportunity to use ISEs as important tools in the continuing study of fluid flow and the transport of conservative solutes in heterogeneous, saturated porous media. Résumé Les hydrogéologues se sont progressivement appuyés sur des expériences de laboratoire sur des milieux poreux hétérogènes (connus aussi par l'expression "Expériences àéchelle intermédiaire", ISE) pour étudier les zones saturées et non saturées des aquifères. Parmi les nombreuses applications en cours des ISE, il faut noter l'étude de l'écoulement de fluide et le transport de solutés conservatifs dans des champs aux perméabilités corrélées. Les récents progrès du protocole des ISE ont donné la possibilité de créer des champs de perméabilités corrélées au laboratoire. Cette possibilité est importante dans l'application des ISE pour l'évaluation des théories stochastiques récentes. En outre, la technologie des capteurs de pression et les méthodes de visualisation donnent la possibilité d'utiliser les ISE pour caractériser les distributions spatiales à la fois de la piézométrie et de la vitesse locale de l'eau dans un champs de perméabilités corrélées. Finalement, des méthodes variées peuvent être utilisées pour caractériser les variations temporelles de la distribution spatiale (et, par conséquent, les moments spatiaux) des concentrations de soluté dans les ISE. En conclusion, donc, des développements récents des techniques expérimentales ont fourni l'occasion d'utiliser les ISE comme d'importants outils d'étude en continu des écoulement de fluides et de transport de solutés conservatifs dans des milieux poreux saturés hétérogènes. Resumen Los experimentos de laboratorio en medio poroso heterogéneo (conocidos como Experimentos a Escala Intermedia o ISE) están cada vez mejor considerados para el estudio de los sistemas saturados y no saturados. Entre las muchas aplicaciones de los ISE se encuentra el estudio del flujo y el transporte de solutos conservativos en medios con permeabilidad que presentan una cierta estructura de correlación. Avances recientes en el diseño de los ISE han proporcionado la capacidad de crear medios de este tipo en el laboratorio. Esta capacidad es importante para la aplicación de los ISE a la evaluación de las teorías estocásticas recientes. Además, la tecnología de los transductores de presión y los métodos de visualización han permitido que los ISE se usen para caracterizar la distribución espacial de niveles hidráulicos y de las velocidades locales del agua en campos de permeabilidad con determinada correlación espacial. Finalmente, existen varios métodos para caracterizar las variaciones temporales en la distribución espacial (y por tanto los momentos estadísticos espaciales) de la concentración de solutos en los ISE. Se concluye que los desarrollos recientes en las técnicas experimentales han proporcionado una oportunidad para usar los ISE como herramientas fundamentales en el estudio del flujo y transporte de solutos conservativos en medio poroso heterogéneo y saturado.

Note des Éditeurs scientifiques

NASA Astrophysics Data System (ADS)

Averbuch, P.

Cette série d'articles est une revue de résultats expérimentaux sur différents "fluides" moléculaires, dans lesquels la cohésion est due à des forces de Van der Waals et à des liaisons hydrogène, l'eau étant un de ces fluides. Ces résultats sont présentés de façon à justifier expérimentalement un modèle original, non extensif, des propriétés de ces fluides, et l'ensemble se présente sous la forme de trois articles décrivant le modèle, suivis chacun par un article le comparant aux résultats expérimentaux publiés par de nombreux auteurs. Le caractère non extensif des propriétés physiques des fluides est choquant, contraire à beaucoup d'idées établies, il semble n'avoir en sa faveur qu'un argument, la comparaison avec un nombre de résultats expérimentaux assez grand pour que l'effet du hasard soit difficilement soupçonnable. En particulier, les écarts entre des résultats de mesures faits par des auteurs différents dans des conditions différentes sont expliqués, le sérieux et la compétence des différents expérimentateurs ne sont plus mis en doute : mais l'interprétation de ces résultats avec un modèle extensif non adapté est seule mise en cause. Les modèles extensifs étant utilisés systématiquement, au delà des expériences de physiciens, dans les calculs d'ingénieurs, et dans la modélisation d'appareils qui fonctionnent et de phénomènes naturels observés par tout le monde, il fallait expliquer pourquoi on pouvait renoncer à l'extensivité. Les raisons du succès pratique des modèles extensifs sont données, d'abord dans le cas des nématiques, puis dans celui des liquides ordinaires, et c'est ce qui rend l'ensemble cohérent, tant avec les mesures physiques fines qu'avec les observations quotidiennes. Il n'en reste pas moins que si l'interprétation donnée dans cette série d'articles est généralisable, une justification théorique du modèle utilisé devient nécessaire. Pour ce qui est des propriétés d'équilibre, une séparation de l'énergie libre en énergie libre de volume et en énergie libre de surface devrait donner les mêmes résultats ; par contre les choses deviennent troublantes dès que l'on passe aux coefficients de transport, c'est-à-dire à l'aspect macroscopique de la dynamique moléculaire. Il y a là un écart notable avec les conceptions courantes, ce qui rend très surprenante la lecture de ces articles. On peut mentionner la liste des problèmes théoriques posés par la description phénoménologique qui est celle de cette série d'articles : la généralisation de lois d'échelle en dehors de zones critiques n'est pas absolument nouvelle, par contre la simplicité des lois reliant l'exposant v à la température pose problème ; le sens des temps de relaxation utilisés est sans doute également à préciser. Enfin les modes considérés semblent n'intervenir dans les propriétés thermodynamiques que par un facteur par mode, comme si seulement l'énergie potentielle devait intervenir, les termes cinétiques ne participant pas vraiment aux transitions de phase. Tout cela pose donc problème, et l'on peut se demander si un pareil modèle peut être compatible avec tout ce qui est connu par ailleurs en physique statistique. Mais s'il rend bien compte de beaucoup de résultats expérimentaux, ce sont ces derniers qui seraient en difficulté avec la mécanique statistique. Il a donc semblé préférable de publier le modèle, sa justification expérimentale et de poser quelques problèmes, tant aux théoriciens, qui pourraient expliquer pourquoi un tel modèle rend compte de résultats observés, qu'aux expérimentateurs, qui pourraient reprendre certaines mesures, et délimiter le caractère plus ou moins général du modèle.

Ultrasonic diagnostic in porous media and suspensions

NASA Astrophysics Data System (ADS)

Bacri, J.-C.; Hoyos, M.; Rakotomalala, N.; Salin, D.; Bourlion, M.; Daccord, G.; Lenormand, R.; Soucemarianadin, S.

1991-08-01

An apparatus has been constructed to characterize transient fluid displacements in porous media, and probe sedimenting suspensions. The technique used is to propagate an ultrasonic wave in the sample. Both ultrasonic attenuation and velocity are related to the static and hydrodynamic properties of the medium. The system was built so as to perform array imaging (mapping) and tested with different fluids and suspensions. It is suggested that the ultrasonic technique can be suitable whenever transient, low cost and safe saturation and concentration measurements are to be performed. Nous avons réalisé un appareil pour étudier l'évolution temporelle des écoulements en milieux poreux et au cours de la sédimentation des suspensions. La technique employée utilise la propagation d'une onde ultrasonore dans l'échantillon. L'atténuation et la vitesse ultrasonores sont toutes deux reliées aux propriétés statique et dynamique du mileu. Le système d'imagerie acoustique permet une cartographie à deux dimensions de l'échantillon , ce système a été testé avec différents fluides et suspensions. Notre étude montre que la technique ultrasonore est bien adaptée à la détermination de la dépendance temporelle de la concentration et de la saturation dans des conditions de sécurité et de coût optimales.

The Photoviscous Properties of Fluids

DTIC Science & Technology

1942-02-01

and (h) the specific fringe value. The first of these values is de - fined as the velocity gradiont that will produce a rola- tivo retardation of...einer bewegten zähen Flüssigkeit. Ann.-der Phys. (II)t Bd. 151, 1874, p. 154. Kundt i A.: Über die Doppelbrechung des Lichtes in be- wegten...reibenden Flüssigkeiten. Ann. der Phys. (Ill), Bd. 13, 1881, pp. 110-133. deMetz, &.: Über die temporare Doppelbrechung des Lichtes in rotirenden

Neurological Limitations of Aircraft Operations: Human Performance Implications (les Limitations neurologiques des operations aeriennes: les Consequences pour les performances des equipages).

DTIC Science & Technology

1996-04-01

Amniotic fluid Debris?* Young women Long bone fracture Fat * Any age Chronic intravenous drug users Talc* Any age Disseminated intravascular coagulapathy...maximal stress at which bone fracture occurs. This study demonstrated the usefulness of finite Results from centrifuge experiments element analysis for...Vine Street M/S 455 Philadelphia, PA 19102-1192, USA SUMMARY Exposure to Impact Acceleration (15). In these reports, fracture of the bones, dislocation

Etude expérimentale des écoulements darcéens à travers un lit de fibres rigides empilées aléatoirement: influence de la porosité

NASA Astrophysics Data System (ADS)

Rahli, O.; Tadrist, L.; Miscevic, M.; Santini, R.

1995-11-01

Experimental studies have been carried out on fluid flow through porous media made up of randomly packed monodisperse fibers. The fibers of fixed diameter have an aspect ratio (L/d) varying between 4 and 70 given porosities of the porous media varying between 0.35 and 0.90. The relationships between friction losses and superficial velocity have been systematically determined for each porous medium. A detailed analysis is carried out for low fluid velocities. The influence of flow direction on pressure drop is studied along two perpendicular directions: it is found that fibrous media behave globally in isotropic manner. The permeability and the Kozeny Carman parameter k_k are deduced from experimental results. The variations of the permeability increase exponentially with the porosity. The Kozeny Carman parameter k_k is a decreasing function of the porosity ɛ(L/d) and tends asymptotically to a value close to that deduced from a modified Ergun relation. The important decrease, observed for small aspect ratios, is certainly an effect of the cut sections of fibers. This effect becomes negligible for larger aspect ratios. The results in terms of permeability and of Kozeny Carman parameter k_k are systematically compared to those deduced from various theoretical models. Generally, these models consider cylinders arranged in simple network, the flow being either parallel or perpendicular to the axis of cylinders. The variation laws of the parameter k_k, deduced from different models, present important discrepancies with our experimental results. The theoretical models, established for regular arrays of fibers do not correctly describe the behavior of randomly packed fibers. Des études expérimentales de l'écoulement d'un fluide à travers un milieu poreux constitué de fibres monodisperses empilées aléatoirement sont réalisées. Les milieux fibreux étudiés ont des porosités variant de 0,35 à 0,90. Ces porosités sont obtenues à l'aide de fibres dont le rapport d'aspect L/d varie de 4 à 70. Les lois de perte de charge en fonction de la vitesse du fluide sont déterminées systématiquement pour chaque milieu poreux. Une analyse détaillée est effectuée pour les faibles vitesses d'écoulement. L'influence de la direction de l'écoulement sur les lois de perte de charge est étudiée. Celles-ci sont établies suivant deux directions perpendiculaires. Les résultats obtenus mettent en évidence un comportement du milieu fibreux globalement isotrope vis à vis de l'écoulement du fluide. La perméabilité et le paramètre de Kozeny Carman k_k sont déduits des résultats expérimentaux. Les variations de la perméabilité en fonction de la porosité suivent une loi de type exponentiel. Le paramètre de Kozeny Carman k_k décroît en fonction de la porosité ɛ(L/d) et tend asymptotiquement vers une valeur proche de celle déduite de la relation d'Ergun modifiée. La décroissance importante, observée pour les petits rapports d'aspect, est sans doute due aux effets induits par les surfaces de base des fibres. Ces effets deviennent négligeables pour les grands rapports d'aspect. Les résultats en terme de perméabilité et de paramètre de Kozeny Carman sont comparés systématiquement avec les modèles proposés dans la littérature. Généralement, ces modèles supposent des cylindres de grande longueur, disposés en réseaux simples. L'écoulement est soit parallèle, soit perpendiculaire à l'axe des cylindres. Les lois de variation du paramètre k_k, déduites des différents modèles, présentent des écarts importants avec les résultats expérimentaux. Ces résultats semblent montrer qu'une disposition des fibres en réseaux simples ne permet pas une description convenable des écoulements à travers les empilements aléatoires de fibres.

Quantum droplets of light in the presence of synthetic magnetic fields

NASA Astrophysics Data System (ADS)

Wilson, Kali; Westerberg, Niclas; Valiente, Manuel; Duncan, Callum; Wright, Ewan; Ohberg, Patrik; Faccio, Daniele

2017-04-01

Recently, quantum droplets have been demonstrated in dipolar Bose-Einstein condensates, where the long range (nonlocal) attractive interaction is counterbalanced by a local repulsive interaction. In this work, we investigate the formation of quantum droplets in a two-dimensional nonlocal fluid of light. Fluids of light allow us to control the geometry of the system, and thus introduce vorticity which in turn creates an artificial magnetic field for the quantum droplet. In a quantum fluid of light, the photons comprising the fluid are treated as a gas of interacting Bose-particles, where the nonlocal interaction comes from the nonlinearity inherent in the material, in our case an attractive third-order thermo-optical nonlinearity. In contrast to matter-wave droplets, photon fluid droplets are not stabilised by local particle-particle scattering, but from the quantum pressure itself, i.e., a balance between diffraction and the nonlocal nonlinearity. We will present a numerical and analytical investigation of the ground state of these droplets and of their subsequent dynamics under the influence of a self-induced artificial magnetic field, and discuss experimental work with the possibility to include artificial gauge interactions between droplets.

Caractérisation géochimique des fluides associés aux minéralisations Pb sbnd Zn de Bou-Dahar (Maroc)

NASA Astrophysics Data System (ADS)

Adil, Samira; Bouabdellah, Mohammed; Grandia, Fidel; Cardellach, Esteve; Canals, Àngel

2004-11-01

The Bou-Dahar Pb sbnd Zn Mississippi Valley deposits located in the eastern part of the High Atlas Range (Morocco) are hosted by a Liassic reefal complex. Fluid inclusion and 'crush-leach' data show that two distinct fluids were involved in the mineralisation deposition: a warmer, more saline fluid (180 °C, >25 wt% NaCl equivalent) and a cooler, less saline fluid (70 °C, 16 wt% equivalent NaCl). Mixing of these two fluids resulted in the precipitation of the ore. The solute composition of the ore-forming brine suggests that the MVT mineralising fluids were probably a mixture of halite-dissolution fluids and evaporated seawater. To cite this article: S. Adil et al., C. R. Geoscience 336 (2004).

Élaboration d'un bronze Cu-8%Sn fritté sous pression et l'étude de son aptitude à l'absorption

NASA Astrophysics Data System (ADS)

Loucif, K.; Keraghel, F.; Alem, S.

2005-05-01

L'introduction des píeces miniatures dans le domaine de l'informatique et la microélectronique nécessite une grande précision et un environnement propre. D'autre part, la conservation d'énergie exige des pièces légères et une bonne longévité. Pour résoudre ces problèmes, des pièces autolubrifiées ont été proposées. En effet, plusieurs disciplines peuvent s'ingérer pour élaborer ces pièces: la métallurgie des poudres pour produire des pièces poreuses, la tribologie pour caractériser la pièce en fonctionnement et la mécanique des fluides pour évaluer le comportement échantillon -lubrifiant.
Dans ce présent travail, nous présentons l'évolution de la densité des échantillons élaborés en fonction de: la température d'élaboration, la pression de compactage, et le temps de maintien et l'évolution de l'absorption des lubrifiants par un alliage Cu-8% Sn fritté sous pression. Les lubrifiants choisis sont l'eau et une huile de machine à usage domestique et leur aptitude à l'autolubrification.

Hypodipsic hypernatraemia in a miniature schnauzer.

PubMed

Van Heerden, J; Geel, J; Moore, D J

1992-03-01

Normovolaemic hypernatraemia as a result of a suspected congenital primary hypodipsia was diagnosed in a young male Miniature Schnauzer. Despite an elevated serum sodium concentration, the dog did not appear dehydrated on physical examination and the urine osmolality: plasma osmolality ratio was greater than 4; antidiuretic hormone deficiency was therefore not suspected. Basal serum cortisol and thyroxine concentrations were normal. Plasma aldosterone concentration and plasma renin activity (37 pmol l-1 and 1.55 ng dl-1 h-1 respectively) were within normal range. A defective central thirst regulation mechanism was suspected as the dog was totally disinterested in drinking water despite the chronically elevated serum sodium concentration. Excessive ingestion of water mixed with food, and milk resulted in hyponatraemia and associated cerebral oedema. On stabilisation of the dog's condition, a calculated fluid intake based on daily maintenance fluid requirements was prescribed to prevent recurrence of hypernatraemia and hyponatraemia, and associated signs of central nervous system disease. The dog was in apparent good health with controlled fluid intake when examined 230 d later.

Internal Nano Voids in Yttria-Stabilised Zirconia (YSZ) Powder

PubMed Central

Barad, Chen; Shekel, Gal; Shandalov, Michael; Hayun, Hagay; Kimmel, Giora; Shamir, Dror; Gelbstein, Yaniv

2017-01-01

Porous yttria-stabilised zirconia ceramics have been gaining popularity throughout the years in various fields, such as energy, environment, medicine, etc. Although yttria-stabilised zirconia is a well-studied material, voided yttria-stabilised zirconia powder particles have not been demonstrated yet, and might play an important role in future technology developments. A sol-gel synthesis accompanied by a freeze-drying process is currently being proposed as a method of obtaining sponge-like nano morphology of embedded faceted voids inside yttria-stabilised zirconia particles. The results rely on a freeze-drying stage as an effective and simple method for generating nano-voided yttria-stabilised zirconia particles without the use of template-assisted additives. PMID:29258227

Internal Nano Voids in Yttria-Stabilised Zirconia (YSZ) Powder.

PubMed

Barad, Chen; Shekel, Gal; Shandalov, Michael; Hayun, Hagay; Kimmel, Giora; Shamir, Dror; Gelbstein, Yaniv

2017-12-18

Porous yttria-stabilised zirconia ceramics have been gaining popularity throughout the years in various fields, such as energy, environment, medicine, etc. Although yttria-stabilised zirconia is a well-studied material, voided yttria-stabilised zirconia powder particles have not been demonstrated yet, and might play an important role in future technology developments. A sol-gel synthesis accompanied by a freeze-drying process is currently being proposed as a method of obtaining sponge-like nano morphology of embedded faceted voids inside yttria-stabilised zirconia particles. The results rely on a freeze-drying stage as an effective and simple method for generating nano-voided yttria-stabilised zirconia particles without the use of template-assisted additives.

Dysphagia as a risk factor for mortality in Niemann-Pick disease type C: systematic literature review and evidence from studies with miglustat

PubMed Central

2012-01-01

Niemann-Pick disease type C (NP-C) is a rare neurovisceral disease characterised by progressive neurological deterioration and premature death, and has an estimated birth incidence of 1:120,000. Mutations in the NPC1 gene (in 95% of cases) and the NPC2 gene (in approximately 4% of cases) give rise to impaired intracellular lipid metabolism in a number of tissues, including the brain. Typical neurological manifestations include vertical supranuclear gaze palsy, saccadic eye movement abnormalities, cerebellar ataxia, dystonia, dysmetria, dysphagia and dysarthria. Oropharyngeal dysphagia can be particularly problematic as it can often lead to food or fluid aspiration and subsequent pneumonia. Epidemiological data suggest that bronchopneumonia subsequent to food or fluid aspiration is a major cause of mortality in NP-C and other neurodegenerative disorders. These findings indicate that a therapy capable of improving or stabilising swallowing function might reduce the risk of aspiration pneumonia, and could have a positive impact on patient survival. Miglustat, currently the only approved disease-specific therapy for NP-C in children and adults, has been shown to stabilise key neurological manifestations in NP-C, including dysphagia. In this article we present findings from a systematic literature review of published data on bronchopneumonia/aspiration pneumonia as a cause of death, and on the occurrence of dysphagia in NP-C and other neurodegenerative diseases. We then examine the potential links between dysphagia, aspiration, pneumonia and mortality with a view to assessing the possible effect of miglustat on patient lifespan. PMID:23039766

Iterative and multigrid methods in the finite element solution of incompressible and turbulent fluid flow

NASA Astrophysics Data System (ADS)

Lavery, N.; Taylor, C.

1999-07-01

Multigrid and iterative methods are used to reduce the solution time of the matrix equations which arise from the finite element (FE) discretisation of the time-independent equations of motion of the incompressible fluid in turbulent motion. Incompressible flow is solved by using the method of reduce interpolation for the pressure to satisfy the Brezzi-Babuska condition. The k-l model is used to complete the turbulence closure problem. The non-symmetric iterative matrix methods examined are the methods of least squares conjugate gradient (LSCG), biconjugate gradient (BCG), conjugate gradient squared (CGS), and the biconjugate gradient squared stabilised (BCGSTAB). The multigrid algorithm applied is based on the FAS algorithm of Brandt, and uses two and three levels of grids with a V-cycling schedule. These methods are all compared to the non-symmetric frontal solver. Copyright

Helicity

NASA Astrophysics Data System (ADS)

Moffatt, H. Keith

2018-03-01

This short review is a contribution to an issue of Comptes Rendus Mécanique commemorating the scientific work of Jean-Jacques Moreau (1923-2014). His main contribution to fluid mechanics appeared in a brief paper in the Comptes Rendus à l'Académie des Sciences in 1961, but was not recognised till much later. It may now be seen as a significant milestone in advancing the theory of ideal fluid flow as described by Euler's equations.

Technical Status Review on Drag Prediction and Analysis from Computational Fluid Dynamics: State of the Art

DTIC Science & Technology

1989-06-01

Methodes de Panel) ct sur l’equation complete du potentiel avec ou sans incorporation des effets visqueux. sont couramment employees darn l’industrie...quo pour ce qui eat do Is privision do Is tralnie ia situation actuolle nett pas satisfaisante. Il est en effet plus facile d’obtonir do bonnos...d’un nouvel appareil civil ou militairo utilisont donc encore largaent les essais en soufflerie en Is1 C. minimum eat ensuite corrigE des effets

Determination of the Landau Lifshitz damping parameter of composite magnetic fluids

NASA Astrophysics Data System (ADS)

Fannin, P. C.; Malaescu, I.; Marin, C. N.

2007-01-01

Measurements of the frequency dependent, complex magnetic susceptibility, χ(ω)= χ‧( ω)- iχ″( ω), in the GHz range, are used to investigate the effect which the mixing of two different magnetic fluids has on the value of the damping parameter, α, of the Landau-Lifshitz equation. The magnetic fluid samples investigated in this study were three kerosene-based magnetic fluids, stabilised with oleic acid, denoted as MF1, MF2 and MF3. Sample MF1 was a magnetic fluid with Mn 0.6Fe 0.4Fe 2O 4 particles, sample MF2 was a magnetic fluid with Ni 0.4Zn 0.6Fe 2O 4 particles and sample MF3 was a composite magnetic fluid obtained by mixing a part of sample MF1 with a part of sample MF2, in proportion of 1:1. The experimental results revealed that the value of the damping parameter of the composite sample (sample MF3) is between the α values obtained for its constituents (samples MF1 and MF2). Based on the superposition principle, which states that the susceptibility of a magnetic fluid sample is a superposition of individual contributions of the magnetic particles, a theoretical model is proposed. The experimental results are shown to be in close agreement with the theoretical results. This result is potentially useful in the design of microwave-operating materials, in that it enables one to determine a particular value of damping parameter.

Propriétés électrostrictives de céramiques massives du type PbMg{1/3}Nb{2/3}O3 (PMN)

NASA Astrophysics Data System (ADS)

Lattard, E.; Lejeune, M.; Abelard, P.

1994-07-01

Loop hysteresis, dielectric and electrostrictive properties of bulk ceramics (1 - x) PbMg{1/3}Nb{2/3}O3 - xPbTiO3 - yMgO for x = 0, 5, 10 % and y = 0, 6, 12 % have been investigated. An initial lead oxide magnesium excess stabilises the perovskite structure during its formation and leads to an improvement of the electrical properties. These materials are relaxor type ferroelectrics with high permittivities in a large space of temperature around - 12 ^circC for x = 0 % to + 45 ^circC for x = 10 %. They exhibit, at 25 ^circC, large electrostrictive longitudinal (x_3 = Δ e/e) and transversal (x_1 = Δ d/d) strains without hysteresis, under an electric field of ± 2 kV/mm and at low frequency (F = 20 mHz) : x_3 = 3.5 × 10^{-4} and x_1 =10^{-4} for PMN 0.12-MgO and x_3 = 10^{-3} and x_1 = 2 × 10^{-4} for 0.9 PMN-0.1 PT-0.12 MgO. Additions of titanium improve the polarization of material which largely contribute to large strains whereas electrostrictive coefficients Q_{ij} (x_i = Q_{ij} \\cdot P_j^2), determined at 25 ^circC, slightly increase with PbTiO3 percent (for a constant magnesium excess). Les propriétés diélectriques, d'hystérésis de polarisation et électrostrictives (déformation sous champ électrique) ont été étudiées sur des composés massifs du type (1 - x) PbMg{1/3}Nb{2/3}O3 - xPbTiO3 - y Mgo pour x = 0, 5, 10 % et y = 0, 6, 12 %. L'excès initial d'oxyde de magnésium stabilise la phase pérovskite lors de sa formation et permet d'éviter la dégradation des propriétés électriques observée sur un composé de type PMN stœchiométrique. Ces matériaux sont des relaxeurs ferroélectriques caractérisés par une transition ferroélectrique diffuse. Les permittivités sont élevées dans un domaine de température centré autour de - 12 ^circC pour x = 0 % à + 45 ^circC pour x = 10 %. Ils présentent, à 25 ^circC, des déformations notables en mode longitudinal (x_3 = Δ e/e) et transversal (x_1 = Δ d/d), dépourvues d'hystérèse, d'origine électrostrictive (pour des champs électriques de l'ordre du kV/mm, à très basse fréquence, F = 20 mHz), soit quand E = ± 2 kV/mm, x_3 = 3,5 × 10^{-4} et x_1 = 10^{-4} pour PMN-0,12 MgO, et x_3 = 10^{-3} et x_1 = 2 × 10^{-4} pour 0,9 PMN-0,01 PT-0, 12 MgO. L'apport de titane permet d'augmenter la polarisabilité, facteur prépondérant à de grandes déformations. Parallèlement, les coefficients électrostrictifs Q_{ij} (x_i = Q_{ij} \\cdot p^2_j), calculés à 25 ^circC, croissent faiblement lorsque le pourcentage de PbTiO3 augmente, à taux de magnésium constant.

Bubble contraction in free-boundary Hele-Shaw flow with surface tension and kinetic undercooling regularisation

NASA Astrophysics Data System (ADS)

Dallaston, Michael; McCue, Scott

2012-11-01

When an inviscid bubble expands into a viscous fluid in a Hele-Shaw cell, the bubble boundary is unstable, in general forming long fingers (the Saffman-Taylor instability). In order to make the problem well-posed, a regularising boundary effect must be included. The most widely studied of these are surface tension, which penalises high curvatures, and kinetic undercooling, which penalises high velocities. Both these effects act as a stabilising influence on the free boundary. Less attention has been paid to the case of contracting bubbles, which shrink to a single point (or points) in finite time. In this case, the two effects are in competition, as surface tension stabilises the boundary, while kinetic undercooling destabilises it. This leads to bifurcation behaviour in the asymptotic (near-extinction) shape of the bubble as the relative strengths of the two effects are varied. In particular, there is a critical range of parameter values for which both circular and slit-type bubbles are stable, with a third (unstable) oval-type shape also present. We discuss some numerical and analytic techniques for solving the full free boundary problem and for exploring this interesting extinction behaviour.

Thermodynamics and performance of the Mg-H-F system for thermochemical energy storage applications.

PubMed

Tortoza, Mariana S; Humphries, Terry D; Sheppard, Drew A; Paskevicius, Mark; Rowles, Matthew R; Sofianos, M Veronica; Aguey-Zinsou, Kondo-Francois; Buckley, Craig E

2018-01-24

Magnesium hydride (MgH 2 ) is a hydrogen storage material that operates at temperatures above 300 °C. Unfortunately, magnesium sintering occurs above 420 °C, inhibiting its application as a thermal energy storage material. In this study, the substitution of fluorine for hydrogen in MgH 2 to form a range of Mg(H x F 1-x ) 2 (x = 1, 0.95, 0.85, 0.70, 0.50, 0) composites has been utilised to thermodynamically stabilise the material, so it can be used as a thermochemical energy storage material that can replace molten salts in concentrating solar thermal plants. These materials have been studied by in situ synchrotron X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, temperature-programmed-desorption mass spectrometry and Pressure-Composition-Isothermal (PCI) analysis. Thermal analysis has determined that the thermal stability of Mg-H-F solid solutions increases proportionally with fluorine content, with Mg(H 0.85 F 0.15 ) 2 having a maximum rate of H 2 desorption at 434 °C, with a practical hydrogen capacity of 4.6 ± 0.2 wt% H 2 (theoretical 5.4 wt% H 2 ). An extremely stable Mg(H 0.43 F 0.57 ) 2 phase is formed upon the decomposition of each Mg-H-F composition of which the remaining H 2 is not released until above 505 °C. PCI measurements of Mg(H 0.85 F 0.15 ) 2 have determined the enthalpy (ΔH des ) to be 73.6 ± 0.2 kJ mol -1 H 2 and entropy (ΔS des ) to be 131.2 ± 0.2 J K -1 mol -1 H 2 , which is slightly lower than MgH 2 with ΔH des of 74.06 kJ mol -1 H 2 and ΔS des = 133.4 J K -1 mol -1 H 2 . Cycling studies of Mg(H 0.85 F 0.15 ) 2 over six absorption/desorption cycles between 425 and 480 °C show an increased usable cycling temperature of ∼80 °C compared to bulk MgH 2 , increasing the thermal operating temperatures for technological applications.

Caracterisation des proprietes acoustiques des materiaux poreux a cellules ouvertes et a matrice rigide ou souple

NASA Astrophysics Data System (ADS)

Salissou, Yacoubou

L'objectif global vise par les travaux de cette these est d'ameliorer la caracterisation des proprietes macroscopiques des materiaux poreux a structure rigide ou souple par des approches inverses et indirectes basees sur des mesures acoustiques faites en tube d'impedance. La precision des approches inverses et indirectes utilisees aujourd'hui est principalement limitee par la qualite des mesures acoustiques obtenues en tube d'impedance. En consequence, cette these se penche sur quatre problemes qui aideront a l'atteinte de l'objectif global precite. Le premier probleme porte sur une caracterisation precise de la porosite ouverte des materiaux poreux. Cette propriete en est une de passage permettant de lier la mesure des proprietes dynamiques acoustiques d'un materiau poreux aux proprietes effectives de sa phase fluide decrite par les modeles semi-phenomenologiques. Le deuxieme probleme traite de l'hypothese de symetrie des materiaux poreux selon leur epaisseur ou un index et un critere sont proposes pour quantifier l'asymetrie d'un materiau. Cette hypothese est souvent source d'imprecision des methodes de caracterisation inverses et indirectes en tube d'impedance. Le critere d'asymetrie propose permet ainsi de s'assurer de l'applicabilite et de la precision de ces methodes pour un materiau donne. Le troisieme probleme vise a mieux comprendre le probleme de transmission sonore en tube d'impedance en presentant pour la premiere fois un developpement exact du probleme par decomposition d'ondes. Ce developpement permet d'etablir clairement les limites des nombreuses methodes existantes basees sur des tubes de transmission a 2, 3 ou 4 microphones. La meilleure comprehension de ce probleme de transmission est importante puisque c'est par ce type de mesures que des methodes permettent d'extraire successivement la matrice de transfert d'un materiau poreux et ses proprietes dynamiques intrinseques comme son impedance caracteristique et son nombre d'onde complexe. Enfin, le quatrieme probleme porte sur le developpement d'une nouvelle methode de transmission exacte a 3 microphones applicable a des materiaux ou systemes symetriques ou non. Dans le cas symetrique, on montre que cette approche permet une nette amelioration de la caracterisation des proprietes dynamiques intrinseques d'un materiau. Mots cles. materiaux poreux, tube d'impedance, transmission sonore, absorption sonore, impedance acoustique, symetrie, porosite, matrice de transfert.

Formability Extension of Aerospace Alloys for Tube Hydroforming Applications =

NASA Astrophysics Data System (ADS)

Anderson, Melissa

L'hydroformage de tube est un procede novateur de mise en forme du metal qui utilise la pression d'un fluide, generalement de l'eau, dans une matrice fermee pour deformer plastiquement des pieces d'epaisseur faible et fabriquer ainsi des composants tubulaires de geometries complexes. Ce procede possede de nombreux avantages tels que la reduction du poids des pieces, la diminution des couts lies a l'outillage et l'assemblage, la reduction du nombre d'etapes de fabrication et l'excellent etat de surface des pieces hydroformees. Cependant, malgre tous ces atouts, l'hydroformage reste un procede marginal dans le domaine aerospatial a cause de plusieurs facteurs dont la formabilite limitee des alliages aeronautiques. L'objectif principal de la recherche conduite dans le cadre de cette these est d'etudier une methode pour augmenter la formabilite de deux alliages aeronautiques designes par l'utilisation d'un procede de mise en forme multi-etapes qui inclue des cycles de mise en forme suivis d'etapes de traitement thermique intermediaires. Une revue de litterature exhaustive sur les methodes existantes pour ameliorer la formabilite des materiaux vises ainsi que les traitements thermiques d'adoucissement disponibles a permis d'etablir une procedure experimentale appropriee. Ce procede comprend plusieurs sequences de mise en forme suivie de traitement thermique successives jusqu'a l'obtention de la piece finale. L'insertion d'etapes de traitements thermiques intermediaires ainsi que la combinaison " deformation + traitement thermique " influencent le comportement mecanique et metallurgique des alliages. De ce fait, une caracterisation complete des materiaux a ete conduite a chaque etape du procede. D'un point de vue mecanique, l'effet des traitements thermiques et plus generalement du procede multi-etapes sur les proprietes mecaniques et lois constitutives des alliages a ete etudie en detail. Au niveau metallurgique, l'influence du procede sur les caracteristiques microstructurales des alliages tels la taille de grains, les phases en presence et la texture a ete analysee. Ces deux etudes paralleles ont permis de comprendre de facon complete et detaillee l'impact des modifications metallurgiques induites par le procede multietapes sur le comportement mecanique macroscopique et les proprietes finales de la piece.

Synthetic use of the primary kinetic isotope effect in hydrogen atom transfer 2: generation of captodatively stabilised radicals.

PubMed

Wood, Mark E; Bissiriou, Sabine; Lowe, Christopher; Windeatt, Kim M

2013-04-28

Using C-3 di-deuterated morpholin-2-ones bearing N-2-iodobenzyl and N-3-bromobut-3-enyl radical generating groups, only products derived from the more stabilised C-3, rather than the less stabilised C-5 translocated radicals, were formed after intramolecular 1,5-hydrogen atom transfer, suggesting that any kinetic isotope effect present was not sufficient to offset captodative stabilisation.

On the design and role of passive stabilisation within the ST40 spherical tokamak

NASA Astrophysics Data System (ADS)

Buxton, P. F.; Asunta, O.; Gryaznevich, M. P.; Lockley, D.; McNamara, S.; Medvedev, S.; Ruiz de Villa Valdés, E.; Whitfield, G.; Wood, J. M.

2018-06-01

The position of passive stabilisation has been optimised for the low aspect ratio tokamak ST40. We find that passive stabilisation is most effective when conductors are placed near the plasma’s x-point, and the combined effect of having both inboard and outboard passive stabilisation significantly reduces the vertical instability growth rate. The growth rate can be further decreased by cooling the passive conductors down to 80 K. Two concepts for passive stabilisation are considered, passive plates and passive coils, and the relative advantages and disadvantages of each are discussed. Both concepts involve connecting the upper and lower conductors in an ‘anti-symmetric’ manner, which prevents large currents from being induced.

Déshumidification de l'air d'une serre par contact direct à courants croisés avec une solution hygroscopique organique

NASA Astrophysics Data System (ADS)

Chraibi, A.; Jaffrin, A.; Makhlouf, S.; Bentounes, N.

1995-07-01

Greenhouse air can be dehumidified by direct contact with a desicant fluid on a trickle exchanger. The water vapour extraction rate depends on the hygroscopicity of the fluid and on the exchanger efficiency. An organic fluid, the triethylene glycol (TEG) at 90% concentration, has been tested. Cross corrugated cellulosic pads, of the type used in cooling, irrigated with TEG, were placed in a wind channel to dehumidify air at various speeds and temperatures. A semi-analytical model, based on energy and mass conservation, correctly reproduces the water vapor extraction rate and the enthalpy change of both fluids. It is shown that TEG trickling through a ventilated pad of 1 m^2 area and 0.1 m thickness can be used to extract 3 to 5 kg of water vapor per hour in greenhouse climate control applications. Several pads arranged in series can be used to decrease more efficiently the absolute humidity of the air, for other applications like food drying or industrial compressed air. Une technique de déshumidification de l'air des serres consiste à le soumettre au contact d'une solution hygroscopique au sein d'un échangeur ruisselant. Le taux d'extraction de vapeur d'eau dépend à la fois du pouvoir hygroscopique de la solution et de l'efficacité de l'échangeur. Une solution hygroscopique organique, le triéthylène glycol à 90% de concentration, a été expérimentée. Un échangeur ruisselant constitué de parois de cellulose ondulées à corrugations croisées, du type “cooling pad” pour serres agricoles, a été testé pour déshumidifier de l'air dans une soufflerie expérimentale. Un modèle semi-analytique, basé sur les équations de conservation de l'énergie et de masse, permet de rendre compte des échanges et de déduire les paramètres de sortie des deux fluides en contact, à partir des caractéristiques d'entrée. Cette étude permet de chiffrer à environ 3 à 5kg/h la capacité de déshumidification d'un panneau d'un mètre carré et de 10cm d'épaisseur opérant dans les conditions d'une serre agricole. L'usage de plusieurs panneaux en série permettrait d'abaisser plus fortement l'hygrométrie de l'air traité pour d'autres applications, telles que le séchage de plantes aromatiques ou de l'air comprimé dans l'industrie.

[The effect of a short-term group stabilisation training in patients with complex posttraumatic stress disorder].

PubMed

Beldman, G; Kessels, H H L M; de Groot, I W

The international guideline for complex posttraumatic stress disorder (ptsd) from the International Society for Traumatic Stress Studies (istss) recommends treatment in phases, starting with stabilisation treatment. Different forms of stabilisation training have been developed the past few years, one being short-term group stabilisation training.
AIM: To map out the effects of the short-term group training.
METHOD: The research implemented a pre-post design. The training consisted of five group sessions. Questionnaires (bsi, OQ 45 and svl-15) were completed both prior to and after the training. Four domains were assessed: psychosymptomatology in general, depressive symptoms, problems with interpersonal functioning and ptsd-related symptoms. The effect of the training was calculated by paired t-tests.
RESULTS: The questionnaires of the 47 participants who had completed the training were analysed. No significant decrease was observed during the stabilisation training concerning the symptoms of the four evaluated domains.
CONCLUSION: Contrary our expectations, a short-term group-based stabilisation training does not seem to have added value when treating patients with complex ptsd. The results correspond with a recent trend in which the effectiveness of other stabilising methods is questioned. Alternative treatment options are discussed.

Extended hierarchical solvent perturbations from curved surfaces of mesoporous silica particles in a deep eutectic solvent.

PubMed

Hammons, Joshua A; Zhang, Fan; Ilavsky, Jan

2018-06-15

Many applications of deep eutectic solvents (DES) rely on exploitation of their unique yet complex liquid structures. Due to the ionic nature of the DES components, their diffuse structures are perturbed in the presence of a charged surface. We hypothesize that it is possible to perturb the bulk DES structure far (>100 nm) from a curved, charged surface with mesoscopic dimensions. We performed in situ, synchrotron-based ultra-small angle X-ray scattering (USAXS) experiments to study the solvent distribution near the surface of charged mesoporous silica particles (MPS) (≈0.5 µm in diameter) suspended in both water and a common type of DES (1:2 choline Cl-:ethylene glycol). A careful USAXS analysis reveals that the perturbation of electron density distribution within the DES extends ≈1 μm beyond the particle surface, and that this perturbation can be manipulated by the addition of salt ions (AgCl). The concentration of the pore-filling fluid is greatly reduced in the DES. Notably, we extracted the real-space structures of these fluctuations from the USAXS data using a simulated annealing approach that does not require a priori knowledge about the scattering form factor, and can be generalized to a wide range of complex small-angle scattering problems. Copyright © 2018 Elsevier Inc. All rights reserved.

The Pliocene Yafo Formation in Israel: Hydrogeologically inert or active?

NASA Astrophysics Data System (ADS)

Avisar, D.; Rosenthal, E.; Shulman, H.; Zilberbrand, M.; Flexer, A.; Kronfeld, J.; Ben Avraham, Z.; Fleischer, L.

For several decades the ``Saqiye beds'' (later renamed Yafo Formation) underlying the Coastal Plain aquifer (Kurkar Group) aquifer of Israel, were regarded as an extremely thick, tectonically undisturbed, and absolutely impervious aquiclude. Following intensive groundwater exploitation from the overlying Kurkar Group aquifer, brackish and saline waters were locally encountered in the lower parts of this aquifer and always at the contact with the underlying Yafo Formation aquiclude. The present study revealed that this aquiclude is not a uniform and impervious rock unit, but rather an alternation of pervious and impervious strata within the Yafo Formation containing highly pressured fluids of different - mostly high - salinities. The permeable beds are at an angular unconformity and in direct contact with the overlying Kurkar Group aquifer. The Yafo Formation and the underlying and overlying rock units are dislocated by numerous fault systems, which facilitate accessibility of brines into the Kurkar Group aquifer. The mobilization of the saline fluids and their injection into the Kurkar Group aquifer could be due either to diffusion of saline fluids occurring in the permeable horizons of the Petah Tiqva Member through the clays of the Yafo Formation or to their upconing following intensive pumping in the Coastal Plain aquifer. It could have also been caused by up-dip movement of saline water as the result of overpressure generated by major accumulation of gas in the permeable horizons. Another possible mechanism could be hydraulic contact with pressurized brines up-flowing along fault zones from deep-seated Jurassic or Cretaceous reservoirs. The squeezing of saline interstitial water from the clays of the Yafo Formation into the overlying Kurkar Group aquifer, is of secondary importance for groundwater salinization (its input is comparable with salt input from rain). Depuis longtemps, les «couches de Saqiye», nommées maintenant formation de Yafo, constituant le mur de l'aquifère côtier (série de Kurkar) d'Israël, ont été considérées comme un ensemble extrêmement épais, sans déformation tectonique et totalement imperméable. À la suite de l'exploitation intensive de l'eau souterraine de l'aquifère sus-jacent de la série de Kurkar, des eaux salées et des saumures sont rencontrées occasionnellement dans les parties les plus profondes de cet aquifère et toujours au contact de l'imperméable sous-jacent de la formation de Yafo. Cette étude a révélé que cet imperméable n'est pas une unité géologique uniforme et imperméable, mais qu'il s'agit plutôt d'une alternance de couches perméables et imperméables dans la formation de Yafo contenant des fluides sous des pressions fortes avec des salinités différentes (?) et en général élevées (?). Les niveaux perméables sont en discordance angulaire et en contact direct avec l'aquifère sus-jacent de la série de Kurkar. La formation de Yafo et les unités géologiques situées dessous et dessus sont disloquées par de nombreuses systèmes de failles, qui facilitent le passage des saumures dans l'aquifère de la série de Kurkar. La mobilisation des fluides salins et leur injection dans l'aquifère de Kurkar pourraient être dues soit à la diffusion des fluides salins dans les horizons perméables du Petah Tiqva au travers des argiles de la formation de Yafo, soit leur remontée par upconing sous l'effet de pompages intensifs dans l'aquifère de la plaine côtière. Il peut aussi être causé par la remontée des eaux salines selon le pendage sous l'effet d'une surpression provoquée par une accumulation considérable de gaz dans les horizons imperméables. Un autre mécanisme possible pourrait être un contact hydraulique avec des saumures sous pression, remontant le long des zones de faille depuis des réservoirs profonds jurassiques ou crétacés. L'expulsion d'eau saline interstitielle des argiles de la formation de Yafo dans l'aquifère de Kurkar est d'importance secondaire pour la salinisation de l'eau souterraine cet apport est comparable à celui de sels par les pluies. Durante décadas, las ``Saqiyebeds'' (rebautizadas como Formación Yafo) que se sitúan bajo el acuífero Costero (Grupo Kurkar) de Israel fueron consideradas como un acuicludo extremadamente potente, tectónicamente inalterado y totalmente impermeable. Como resultado de la explotación intensiva del Grupo Kurkar, se produjo la mezcla de aguas salobres y salinas en la zona inferior de dicho acuífero y siempre en el contacto con el acuicludo subyaciente de la Formación Yafo. Este estudio reveló que el acuicludo no es una unidad rocosa uniforme e impermeable, sino que consiste en una alternancia de estratos permeables e impermeables dentro de la Formación Yafo, que contiene fluidos a alta presión de salinidades diferentes pero generalmente elevadas. Las capas permeables se hallan en inconformidad angular y en contacto directo con el acuífero superior del Grupo Kurkar. La Formación Yafo y las unidades rocosas infra- y suprayacentes están dislocadas por numerosos sistemas de fallas, lo que facilita el acceso de las salmueras al acuífero del Grupo Kurkar. Los fluidos de los horizontes permeables del Miembro Petah Tiqva a través de las arcillas de la Formación Yafo o hacia el ascenso de los domos salinos en respuesta a la extracción intensiva en el acuífero del Llano Costero. Podría también haber sido causado por el movimiento a favor del buzamiento de las aguas salinas como resultado de la sobrepresión generada por una acumulación mayor de gas en los horizontes permeables. Otro posible mecanismo podría basarse en el contacto hidráulico con salmueras presurizadas, que fluyen hacia arriba a favor de zonas de falla desde los reservorios profundos del Jurásico o del Cretácico. La extracción de agua salina intersticial desde las arcillas de la Formación Yafo hacia el acuífero superior del Grupo Kurkar es de importancia secundaria para la salinización de las aguas subterráneas, ya que su aportación es comparable a la procedente del agua de lluvia.

General Notions on Macroscopic Theory of Waves in Plasmas; NOTIONS GENERALES SUR LA THEORIE MACROSCOPIQUE DES ONDES DANS LES PLASMAS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allis, W.P.; Delcroix, J.L.

1963-01-01

The propagation of monochromatic plane waves in an indefinite plasma is treated in the hydrodynamic theory of two fluids. Plasmas with isotropic pressure and waves obeying exact adiabaticity are considered. (D.C.W.)

Analytical Solutions for Predicting Underwater Explosion Gas Bubble Behaviour

DTIC Science & Technology

2010-11-01

donne les meilleures prévisions comparativement aux ajustements avec les données expérimentales. Le modèle à fluide incompressible exige d’utiliser une...couplage des mouvements radial et migratoire. L’étude montre que, comparativement aux résultats d’expérience, la réduction du rayon de la bulle... comparativement aux ajustements avec les données expérimentales. Le modèle à fluide incompressible exige d’utiliser une fonction empirique de perte d’énergie

Quadratic stabilisability of multi-agent systems under switching topologies

NASA Astrophysics Data System (ADS)

Guan, Yongqiang; Ji, Zhijian; Zhang, Lin; Wang, Long

2014-12-01

This paper addresses the stabilisability of multi-agent systems (MASs) under switching topologies. Necessary and/or sufficient conditions are presented in terms of graph topology. These conditions explicitly reveal how the intrinsic dynamics of the agents, the communication topology and the external control input affect stabilisability jointly. With the appropriate selection of some agents to which the external inputs are applied and the suitable design of neighbour-interaction rules via a switching topology, an MAS is proved to be stabilisable even if so is not for each of uncertain subsystem. In addition, a method is proposed to constructively design a switching rule for MASs with norm-bounded time-varying uncertainties. The switching rules designed via this method do not rely on uncertainties, and the switched MAS is quadratically stabilisable via decentralised external self-feedback for all uncertainties. With respect to applications of the stabilisability results, the formation control and the cooperative tracking control are addressed. Numerical simulations are presented to demonstrate the effectiveness of the proposed results.

Response diversity to land use occurs but does not consistently stabilise ecosystem services provided by native pollinators.

PubMed

Cariveau, Daniel P; Williams, Neal M; Benjamin, Faye E; Winfree, Rachael

2013-07-01

More diverse biological communities may provide ecosystem services that are less variable over space or time. However, the mechanisms underlying this relationship are rarely investigated empirically in real-world ecosystems. Here, we investigate how a potentially important stabilising mechanism, response diversity, the differential response to environmental change among species, stabilises pollination services against land-use change. We measured crop pollination services provided by native bees across land-use gradients in three crop systems. We found that bee species responded differentially to increasing agricultural land cover in all three systems, demonstrating that response diversity occurs. Similarly, we found response diversity in pollination services in two of the systems. However, there was no evidence that response diversity, in general, stabilised ecosystem services. Our results suggest that either response diversity is not the primary stabilising mechanism in our system, or that new measures of response diversity are needed that better capture the stabilising effects it provides. © 2013 John Wiley & Sons Ltd/CNRS.

Multifocal necrotising fasciitis and septic shock complicating varicella infection in an adult

PubMed Central

Mifsud, Simon; Schembri, Emma Louise; Mallia Azzopardi, Charles; Zammit, Maria Alessandra

2013-01-01

A 35-year-old woman with a 3-day history of chickenpox, presented to the hospital in septic shock and with multifocal, non-adjacent lesions of necrotising fasciitis. Necrotising fasciitis is a rare yet life-threatening complication of chickenpox. Blood cultures and wound swabs confirmed the presence of Streptococcus pyogenes. The initial emergency management included oxygen, aggressive fluid resuscitation and antimicrobial therapy. Once the patient was stabilised, surgical management ensued. This included debridement and eventual grafting of the necrotic skin lesions. Intensive management and follow-up for 8 weeks were required before the patient was deemed fit for discharge. PMID:24130210

The use of muscle dynamometer for correction of muscle imbalances in the area of deep stabilising spine system.

PubMed

Malátová, Renata; Rokytová, Jitka; Stumbauer, Jan

2013-08-01

Dorsal pain caused by spine dysfunctions belongs to most frequent chronic illnesses. The muscles of the deep stabilising spine system work as a single functional unit where a dysfunction of only one muscle causes dysfunction of the whole system. Non-invasive, objective and statistically measurable evaluation of the condition of deep stabilising spine system has been made possible by the construction of muscular dynamometer. The aim of our work has been the assessment of deep stabilising spine system by diaphragm test and muscular dynamometer measurements. Based on an initial examination, a 6-week intervention programme was established including instructions on physiological body posture and correct basic body stabilisation for the given exercises and muscle strengthening. Consecutive measurements are then compared with the initial ones. It was presumed that a smaller number of the tested subjects would be able to correctly activate the deep stabilising spine system muscles before the intervention programme when compared to those after the intervention programme. A positive change of 87% has been found. It is clear that if a person actively approaches the programme, then positive adaptation changes on the deep stabilising spine system are seen only after 6 weeks. With the muscular dynamometer, activation of deep stabilising spine system can be objectively measured. Changes between the initial condition of a subject and the difference after some exercise or rehabilitation are especially noticeable. Also, the effect of given therapy or correct performance of the exercise can be followed and observed.

Partial stabilisation of non-homogeneous bilinear systems

NASA Astrophysics Data System (ADS)

Hamidi, Z.; Ouzahra, M.

2018-06-01

In this work, we study in a Hilbert state space, the partial stabilisation of non-homogeneous bilinear systems using a bounded control. Necessary and sufficient conditions for weak and strong stabilisation are formulated in term of approximate observability like assumptions. Applications to parabolic and hyperbolic equations are presented.

Stabilisation times after transitions to standing from different working postures.

PubMed

DiDomenico, Angela; McGorry, Raymond W; Banks, Jacob J

2016-10-01

Transitioning to standing after maintaining working postures may result in imbalance and could elicit a fall. The objective of this study was to quantify the magnitude of imbalance using a stabilisation time metric. Forty-five male participants completed three replications of conditions created by one of four working postures (bent at waist, squat, forward kneel, reclined kneel) and three durations within posture. Participants transitioned to quiet standing at a self-selected pace. Stabilisation time, based on changes in centre of pressure velocity, was used to indicate the initiation of steady state while standing. Stabilisation time was significantly affected by static postures but not duration within posture. The largest stabilisation times resulted from transitions initiated from a bent at waist posture. The smallest were associated with the kneeling postures, which were not significantly different from each other. Findings may lead to recommendations for redesign of tasks, particularly in high-risk environments such as construction. Statement of Relevance: Task performance on the jobsite often requires individuals to maintain non-erect postures. This study suggests that working posture affects stabilisation during transition to a standing position. Bending at the waist and squatting resulted in longer stabilisation times, whereas both kneeling postures evaluated resulted in greater imbalance but for a shorter duration.

Stabilisation of microalgae: Iodine mobilisation under aerobic and anaerobic conditions.

PubMed

Han, Wei; Clarke, William; Pratt, Steven

2015-10-01

Mobilisation of iodine during microalgae stabilisation was investigated, with the view of assessing the potential of stabilised microalgae as an iodine-rich fertiliser. An iodine-rich waste microalgae (0.35 ± 0.05 mg I g(-1) VS(added)) was stabilised under aerobic and anaerobic conditions. Iodine mobilisation was linearly correlated with carbon emission, indicating iodine was in the form of organoiodine. Comparison between iodine and nitrogen mobilisation relative to carbon emission indicated that these elements were, at least in part, housed separately within the cells. After stabilisation, there were 0.22 ± 0.05 and 0.19 ± 0.01 mg g(-1) VS(added) iodine remaining in the solid in the aerobic and anaerobic processed material respectively, meaning 38 ± 5.0% (aerobic) and 50 ± 8.6% (anaerobic) of the iodine were mobilised, and consequently lost from the material. The iodine content of the stabilised material is comparable to the iodine content of some seaweed fertilisers, and potentially satisfies an efficient I-fertilisation dose. Copyright © 2015 Elsevier Ltd. All rights reserved.

Laszlo Tisza and the two-fluid model of superfluidity

NASA Astrophysics Data System (ADS)

Balibar, Sébastien

2017-11-01

The "two-fluid model" of superfluidity was first introduced by Laszlo Tisza in 1938. On that year, Tisza published the principles of his model as a brief note in Nature and two articles in French in the Comptes rendus de l'Académie des sciences, followed in 1940 by two other articles in French in the Journal de physique et le Radium. In 1941, the two-fluid model was reformulated by Lev Landau on a more rigorous basis. Successive experiments confirmed the revolutionary idea introduced by Tisza: superfluid helium is indeed a surprising mixture of two fluids with independent velocity fields. His prediction of the existence of heat waves, a consequence of his model, was also confirmed. Then, it took several decades for the superfluidity of liquid helium to be fully understood.

Flash nano-precipitation of polymer blends: a role for fluid flow?

NASA Astrophysics Data System (ADS)

Grundy, Lorena; Mason, Lachlan; Chergui, Jalel; Juric, Damir; Craster, Richard V.; Lee, Victoria; Prudhomme, Robert; Priestley, Rodney; Matar, Omar K.

2017-11-01

Porous structures can be formed by the controlled precipitation of polymer blends; ranging from porous matrices, with applications in membrane filtration, to porous nano-particles, with applications in catalysis, targeted drug delivery and emulsion stabilisation. Under a diffusive exchange of solvent for non-solvent, prevailing conditions favour the decomposition of polymer blends into multiple phases. Interestingly, dynamic structures can be `trapped' via vitrification prior to thermodynamic equilibrium. A promising mechanism for large-scale polymer processing is flash nano-precipitation (FNP). FNP particle formation has recently been modelled using spinodal decomposition theory, however the influence of fluid flow on structure formation is yet to be clarified. In this study, we couple a Navier-Stokes equation to a Cahn-Hilliard model of spinodal decomposition. The framework is implemented using Code BLUE, a massively scalable fluid dynamics solver, and applied to flows within confined impinging jet mixers. The present method is valid for a wide range of mixing timescales spanning FNP and conventional immersion precipitation processes. Results aid in the fabrication of nano-scale polymer particles with tuneable internal porosities. EPSRC, UK, MEMPHIS program Grant (EP/K003976/1), RAEng Research Chair (OKM), PETRONAS.

Stabilising nanofluids in saline environments.

PubMed

Al-Anssari, Sarmad; Arif, Muhammad; Wang, Shaobin; Barifcani, Ahmed; Iglauer, Stefan

2017-12-15

Nanofluids (i.e. nanoparticles dispersed in a fluid) have tremendous potential in a broad range of applications, including pharmacy, medicine, water treatment, soil decontamination, or oil recovery and CO 2 geo-sequestration. In these applications nanofluid stability plays a key role, and typically robust stability is required. However, the fluids in these applications are saline, and no stability data is available for such salt-containing fluids. We thus measured and quantified nanofluid stability for a wide range of nanofluid formulations, as a function of salinity, nanoparticle content and various additives, and we investigated how this stability can be improved. Zeta sizer and dynamic light scattering (DLS) principles were used to investigate zeta potential and particle size distribution of nanoparticle-surfactant formulations. Also scanning electron microscopy was used to examine the physicochemical aspects of the suspension. We found that the salt drastically reduced nanofluid stability (because of the screening effect on the repulsive forces between the nanoparticles), while addition of anionic surfactant improved stability. Cationic surfactants again deteriorated stability. Mechanisms for the different behaviour of the different formulations were identified and are discussed here. We thus conclude that for achieving maximum nanofluid stability, anionic surfactant should be added. Copyright © 2017 Elsevier Inc. All rights reserved.

On The Stability Of Model Flows For Chemical Vapour Deposition

NASA Astrophysics Data System (ADS)

Miller, Robert

2016-11-01

The flow in a chemical vapour deposition (CVD) reactor is assessed. The reactor is modelled as a flow over an infinite-radius rotating disk, where the mean flow and convective instability of the disk boundary layer are measured. Temperature-dependent viscosity and enforced axial flow are used to model the steep temperature gradients present in CVD reactors and the pumping of the gas towards the disk, respectively. Increasing the temperature-dependence parameter of the fluid viscosity (ɛ) results in an overall narrowing of the fluid boundary layer. Increasing the axial flow strength parameter (Ts) accelerates the fluid both radially and axially, while also narrowing the thermal boundary layer. It is seen that when both effects are imposed, the effects of axial flow generally dominate those of the viscosity temperature dependence. A local stability analysis is performed and the linearized stability equations are solved using a Galerkin projection in terms of Chebyshev polynomials. The neutral stability curves are then plotted for a range of ɛ and Ts values. Preliminary results suggest that increasing Ts has a stabilising effect on both type I and type II stationary instabilities, while small increases in ɛ results in a significant reduction to the critical Reynolds number.

Salinity transfer in double diffusive convection bounded by two parallel plates

NASA Astrophysics Data System (ADS)

Yang, Yantao; van der Poel, Erwin P.; Ostilla-Monico, Rodolfo; Sun, Chao; Verzicco, Roberto; Grossmann, Siegfried; Lohse, Detlef

2014-11-01

The double diffusive convection (DDC) is the convection flow with the fluid density affected by two different components. In this study we numerically investigate DDC between two parallel plates with no-slip boundary conditions. The top plate has higher salinity and temperature than the lower one. Thus the flow is driven by the salinity difference and stabilised by the temperature difference. Our simulations are compared with the experiments by Hage and Tilgner (Phys. Fluids 22, 076603 (2010)) for several sets of parameters. Reasonable agreement is achieved for the salinity flux and its dependence on the salinity Rayleigh number. For all parameters considered, salt fingers emerge and extend through the entire domain height. The thermal Rayleigh number shows minor influence on the salinity flux although it does affect the Reynolds number. We apply the Grossmann-Lohse theory for Rayleigh-Bénard flow to the current problem without introducing any new coefficients. The theory successfully predicts the salinity flux with respect to the scaling for both the numerical and experimental results.

The effectiveness of arthroscopic stabilisation for failed open shoulder instability surgery.

PubMed

Millar, N L; Murrell, G A C

2008-06-01

We identified ten patients who underwent arthroscopic revision of anterior shoulder stabilisation between 1999 and 2005. Their results were compared with 15 patients, matched for age and gender, who had a primary arthroscopic stabilisation during the same period. At a mean follow-up of 37 and 36 months, respectively, the scores for pain and shoulder function improved significantly between the pre-operative and follow-up visits in both groups (p = 0.002), with no significant difference between them (p = 0.4). The UCLA and Rowe shoulder scores improved significantly (p = 0.004 and p = 0.002, respectively), with no statistically significant differences between groups (p = 0.6). Kaplan-Meier analysis for time to recurrent instability showed no differences between the groups (p = 0.2). These results suggest that arthroscopic revision anterior shoulder stabilisation is as reliable as primary arthroscopic stabilisation for patients who have had previous open surgery for recurrent anterior instability.

Stability and stabilisation of a class of networked dynamic systems

NASA Astrophysics Data System (ADS)

Liu, H. B.; Wang, D. Q.

2018-04-01

We investigate the stability and stabilisation of a linear time invariant networked heterogeneous system with arbitrarily connected subsystems. A new linear matrix inequality based sufficient and necessary condition for the stability is derived, based on which the stabilisation is provided. The obtained conditions efficiently utilise the block-diagonal characteristic of system parameter matrices and the sparseness of subsystem connection matrix. Moreover, a sufficient condition only dependent on each individual subsystem is also presented for the stabilisation of the networked systems with a large scale. Numerical simulations show that these conditions are computationally valid in the analysis and synthesis of a large-scale networked system.

Characterization of Fluid Transfer Properties in a Transpressive Fault System: Chaîne des Matheux Fold-and-Thrust Belt and Enriquillo-Plantain Garden Fault Zone - Haiti

NASA Astrophysics Data System (ADS)

Wessels, R.; Ellouz-Zimmermann, N.; Rosenberg, C.; Hamon, Y.; Battani, A.; Bellahsen, N.; Deschamps, R.; Leroy, S. D.; Momplaisir, R.

2016-12-01

The NW - SE trending Chaîne des Matheux (CdM) comprises the onshore frontal thrust sheet of the SW-verging Haitian fold-and-thrust belt (HFTB). The HFTB's active deformation front is covered by sediments of the Cul-de-Sac plain and is bounded on the south by the E - W trending left-lateral Enriquillo-Plantain Garden fault zone (EPGFZ). Seismicity down to the junction between the two systems has been recorded during the 12 January 2010 Mw 7.0 Léogâne earthquake. Stratigraphic, structural and kinematic field data on a transect from the CdM to the EPGFZ indicate (N)NE - (S)SW oriented shortening, which is partitioned over 1) (N)NE-dipping oblique thrusts rooted in Cretaceous basement, 2) decollement levels in both latest Cretaceous and Paleogene limestones, and 3) by strike-slip and positive flower structures along the EPGFZ. We investigated the geometry and kinematics of both fault and fracture systems, which was coupled with sampling and analysis of fluid-derived mineralizations to constrain the timing and geological evolution. C & O isotope and whole-rock analyses have been performed to characterize the geochemistry of the source of these fluids. Raman spectroscopy and fluid-inclusion analyses has been applied to selected samples to comprehend the local burial history. Fluid and gas seepages along fault planes are qualitative indicators for transfer properties between different fault segments and their connectivity with deeper crustal or mantle reservoirs. Relative timing of structures in the CdM coupled with cathodoluminescence (CL) microscopy reveals three deformation phases, characterized by associated calcite veins that precipitated from oxidizing meteoric fluids. The deeply rooted frontal CdM thrust lacks mineralization, but fluids expelled from along-strike natural springs registered He and Ne isotope ratios suggesting a strong mantle-derived component. CL microscopy results on calcite veins from the EPGFZ's fault core imply fluid circulation in an episodically `open' system under a reducing environment. He and Ne isotope ratios from fluids derived along the EPGFZ suggest a significant, but less pronounced, mantle-derived component compared to the frontal thrust of the CdM. The above results indicate a change in fluid transfer properties over time for this transpressive system.

Marine hydrogeology: recent accomplishments and future opportunities

NASA Astrophysics Data System (ADS)

Fisher, A. T.

2005-03-01

Marine hydrogeology is a broad-ranging scientific discipline involving the exploration of fluid-rock interactions below the seafloor. Studies have been conducted at seafloor spreading centers, mid-plate locations, and in plate- and continental-margin environments. Although many seafloor locations are remote, there are aspects of marine systems that make them uniquely suited for hydrologic analysis. Newly developed tools and techniques, and the establishment of several multidisciplinary programs for oceanographic exploration, have helped to push marine hydrogeology forward over the last several decades. Most marine hydrogeologic work has focused on measurement or estimation of hydrogeologic properties within the shallow subsurface, but additional work has emphasized measurements of local and global fluxes, fluid source and sink terms, and quantitative links between hydrogeologic, chemical, tectonic, biological, and geophysical processes. In addition to summarizing selected results from a small number of case studies, this paper includes a description of several new experiments and programs that will provide outstanding opportunities to address fundamental hydrogeologic questions within the seafloor during the next 20-30 years. L'hydrogéologie marine est une large discipline scientifique impliquant l' exploration des interactions entre les fluides et les roches sous les fonds marins. Des études ont été menées dans les différents environnements sous-marins (zone abyssale, plaque océanique, marges continentales). Bien que de nombreux fonds marins soient connus, il existe des aspects des systèmes marins qui les rendent inadaptés à l'analyse hydrologique. De nouveaux outils et techniques, et la mise en oeuvre de nombreux programmes multidisciplinaires d'exploration océanographique, ont aidé à pousser en avant l'hydrogéologie marine ces dix dernières années. La plus part des études hydrogéologiques se sont concentrées jusqu'à présent sur la mesure ou l'estimation des propriétés à la sub-surface des fonds marins, et des travaux complémentaires ont mis en valeur les mesures de flux, local ou global, de termes « sources » et « pertes », et des liens quantitatifs entre l'hydrogéologie, la chimie, la tectonique, la biologie, et les processus géophysiques. Cet article vise à résumer des résultats sélectionnés parmi un petit nombre d'études, et à décrire plusieurs nouvelles expériences et programmes, qui sont autant d'opportunités pour répondre aux questions fondamentales relatives aux fonds marins, posées ces dernières 20-30 années. La hidrogeología marina es una disciplina científica de amplios alcances que involucra la exploración de interacciones fluido-roca por debajo del fondo del mar. Se han llevado a cabo estudios en centros de expansión del fondo del mar, lugares en medio de una placa, y en ambientes de placa y margen continental. Aunque muchos sitios en el fondo del mar son remotos, existen aspectos de estos sistemas marinos que los hacen particularmente adaptables para análisis hidrológico. Nuevas técnicas y herramientas desarrolladas, y el establecimiento de varios programas multidisciplinarios para exploración oceanográfica, han ayudado a impulsar la hidrogeología marina hacia delante durante las ultimas décadas. La mayor parte del trabajo hidrogeológico marino se ha enfocado en la medición o estimación de propiedades hidrogeológicas dentro del subsuelo superficial, pero trabajo adicionalha enfatizado mediciones de flujos globales y locales, términos de fuente y sumidero de fluidos, y vínculos cuantitativos entre procesos hidrogeológicos, químicos, tectónicos, biológicos y geofísicos. Además de resumir resultados seleccionados de un número pequeño de estudios de caso, este artículo incluye una descripción de varios programas y experimentos nuevos que aportarán oportunidades excepcionales para dirigir preguntas hidrogeológicas fundamentales dentro del fondo oceánico durante los siguientes 20-30 años.

Nano- and microparticles at fluid and biological interfaces.

PubMed

Dasgupta, S; Auth, T; Gompper, G

2017-09-20

Systems with interfaces are abundant in both technological applications and biology. While a fluid interface separates two fluids, membranes separate the inside of vesicles from the outside, the interior of biological cells from the environment, and compartmentalize cells into organelles. The physical properties of interfaces are characterized by interface tension, those of membranes are characterized by bending and stretching elasticity. Amphiphilic molecules like surfactants that are added to a system with two immiscible fluids decrease the interface tension and induce a bending rigidity. Lipid bilayer membranes of vesicles can be stretched or compressed by osmotic pressure; in biological cells, also the presence of a cytoskeleton can induce membrane tension. If the thickness of the interface or the membrane is small compared with its lateral extension, both can be described using two-dimensional mathematical surfaces embedded in three-dimensional space. We review recent work on the interaction of particles with interfaces and membranes. This can be micrometer-sized particles at interfaces that stabilise emulsions or form colloidosomes, as well as typically nanometer-sized particles at membranes, such as viruses, parasites, and engineered drug delivery systems. In both cases, we first discuss the interaction of single particles with interfaces and membranes, e.g. particles in external fields, non-spherical particles, and particles at curved interfaces, followed by interface-mediated interaction between two particles, many-particle interactions, interface and membrane curvature-induced phenomena, and applications.

Nano- and microparticles at fluid and biological interfaces

NASA Astrophysics Data System (ADS)

Dasgupta, S.; Auth, T.; Gompper, G.

2017-09-01

Systems with interfaces are abundant in both technological applications and biology. While a fluid interface separates two fluids, membranes separate the inside of vesicles from the outside, the interior of biological cells from the environment, and compartmentalize cells into organelles. The physical properties of interfaces are characterized by interface tension, those of membranes are characterized by bending and stretching elasticity. Amphiphilic molecules like surfactants that are added to a system with two immiscible fluids decrease the interface tension and induce a bending rigidity. Lipid bilayer membranes of vesicles can be stretched or compressed by osmotic pressure; in biological cells, also the presence of a cytoskeleton can induce membrane tension. If the thickness of the interface or the membrane is small compared with its lateral extension, both can be described using two-dimensional mathematical surfaces embedded in three-dimensional space. We review recent work on the interaction of particles with interfaces and membranes. This can be micrometer-sized particles at interfaces that stabilise emulsions or form colloidosomes, as well as typically nanometer-sized particles at membranes, such as viruses, parasites, and engineered drug delivery systems. In both cases, we first discuss the interaction of single particles with interfaces and membranes, e.g. particles in external fields, non-spherical particles, and particles at curved interfaces, followed by interface-mediated interaction between two particles, many-particle interactions, interface and membrane curvature-induced phenomena, and applications.

Global asymptotic stabilisation of rational dynamical systems based on solving BMI

NASA Astrophysics Data System (ADS)

Esmaili, Farhad; Kamyad, A. V.; Jahed-Motlagh, Mohammad Reza; Pariz, Naser

2017-08-01

In this paper, the global asymptotic stabiliser design of rational systems is studied in detail. To develop the idea, the state equations of the system are transformed to a new coordinate via polynomial transformation and the state feedback control law. This in turn is followed by the satisfaction of the linear growth condition (i.e. Lipschitz at zero). Based on a linear matrix inequality solution, the system in the new coordinate is globally asymptotically stabilised and then, leading to the global asymptotic stabilisation of the primary system. The polynomial transformation coefficients are derived by solving the bilinear matrix inequality problem. To confirm the capability of this method, three examples are highlighted.

States of fragility: stabilisation and its implications for humanitarian action.

PubMed

Collinson, Sarah; Elhawary, Samir; Muggah, Robert

2010-10-01

This paper explores the evolution of international stabilisation agendas and their significance for humanitarian action. Stabilisation includes a combination of military, humanitarian, political and economic activities to control, contain and manage areas affected by armed conflict and complex emergencies. Encompassing narrow security objectives and broader peace-building efforts, stabilisation is both a conservative and potentially transformative, comprehensive and long-term agenda. The open-ended approach allows for widely varying interpretations and applications in different circumstances and by different actors with an assortment of implications for humanitarian action. The relationship between the two is highly uncertain and contentious, due not only to the controversies surrounding stabilisation policies, but also to deep-seated ambiguities at the heart of humanitarianism. While humanitarian actors are preoccupied with the growing involvement of the military in the humanitarian sphere, the paper argues that it is trends in the humanitarian-political interface that represent the more fundamental dilemma. © 2010 The Author(s). Journal compilation © Overseas Development Institute, 2010.

The Physical Behavior of Stabilised Soft Clay by Electrokinetic Stabilisation Technology

NASA Astrophysics Data System (ADS)

Azhar, A. T. S.; Nordin, N. S.; Azmi, M. A. M.; Embong, Z.; Sunar, N.; Hazreek, Z. A. M.; Aziman, M.

2018-04-01

Electrokinetic Stabilisation (EKS) technology is the combination processes of electroosmosis and chemical grouting. This technique is most effective in silty and clayey soils where the hydraulic conductivity is very low. Stabilising agents will assist the EKS treatment by inducing it into soil under direct current. The movement of stabilising agents into soil is governed by the principle of electrokinetics. The aim of this study is to evaluate the physical behavior of soft soil using the EKS technology as an effective method to strengthen soft clay soils with calcium chloride (CaCl2) as the stabilising agent. Stainless steel plates were used as the electrodes, while 1.0 mol/l of CaCl2 was used as the electrolyte that fed at the anode compartment. Soft marine clay at Universiti Tun Hussein Onn Malaysia was used as the soil sample. The EKS treatment was developed at Research Centre for Soft Soil (RECESS), UTHM with a constant voltage gradient (50 V/m) in 21 days. The result shows that the shear strength of treated soil was increased across the soil sample. The treated soil near the cathode showed the highest value of shear strength (24.5 – 33 kPa) compared with the anode and in the middle of the soil sample.

Effect of addition of GGBS and lime in soil stabilisation for stabilising local village roads in Thanjavur region

NASA Astrophysics Data System (ADS)

Saravanan, R.; Udhayakumar, T.; Dinesh, S.; Venkatasubramanian, C.; Muthu, D.

2017-07-01

Construction of pavements uses various filling materials and due to the cost factor, the local soil is used for pavement construction. The strength of the soil is improved by stabilisation. This stabilisation increases the load bearing capacities of soil for heavy wheeled vehicle traffic. GGBS, silica fume, rice husk are the basic waste materials used as a waste material, which improves the quality of soil and reduces the cost of pavements. In this study, a detailed investigation is made on the Ground Granulated Blast-furnace Slag (GGBS), activated by lime, in the stabilisation of low bearing capacity sand and clay soils collected from Thanjavur district (Budalur, Sengipatti, Vallam and Palliahgraharam villages). The tests are carried out as per Indian Standards. The test procedures separated into two phases, namely Stage-I and Stage-II. In Stage-I the soil tests include soil type, particle size distribution, soil index properties, standard proctor tests, shear tests and CBR test. In Stage-II the soil tests include shear tests and CBR test for the suitable required proportions of GGBS along with lime in the collected soil samples. The test results from stage-I and stage-II are compared and from the study, it is inferred that the application of GGBS is a useful material for soil stabilisation.

Origine du soufre associé aux minéralisations Pb-Zn de type Mississippi Valley de la chaîne des Beni Snassen orientaux (Maroc nord-oriental)

NASA Astrophysics Data System (ADS)

Bouabdellah, Mohammed; Boudchiche, Lahbib; Ouahhabi, Benali; Naciri, Tayeb

2008-12-01

Sulfur isotope data measured on samples of galena from the main Mississippi Valley-type prospects of the eastern Beni Snassen belt preclude an igneous source for sulfur, pointing instead to a sedimentary source. Negative δ 34S values are interpreted to being derived from bacteriogenic reduction of Jurassic seawater sulphate. Positive δ 34S values are considered to be hydrothermal sulfide transported with metal-bearing fluid. Mixing of these two fluids resulted in the deposition of the Pb ore.

Technical Evaluation Report on the Fluid Dynamics Panel Symposium on Validation of Computational Fluid Dynamics

DTIC Science & Technology

1989-05-01

separately each of the papers presented and makes general comments on the seven major topic sessions. In addition, a Poster Presentation was reviewed in...Appendix to this report. The Poster Papers, also listed in an Appendix, are published in CP437 Volume I. Le pr6sent rapport fait le point et donne une...ConfErence AGARD CP 437 Volume I dont une liste en est donn6e h I’annexe au pr6sent rapport. Une liste des r6unions d’information/exposition est

Effective solidification/stabilisation of mercury-contaminated wastes using zeolites and chemically bonded phosphate ceramics.

PubMed

Zhang, Shaoqing; Zhang, Xinyan; Xiong, Ya; Wang, Guoping; Zheng, Na

2015-02-01

In this study, two kinds of zeolites materials (natural zeolite and thiol-functionalised zeolite) were added to the chemically bonded phosphate ceramic processes to treat mercury-contaminated wastes. Strong promotion effects of zeolites (natural zeolite and thiol-functionalised zeolite) on the stability of mercury in the wastes were obtained and these technologies showed promising advantages toward the traditional Portland cement process, i.e. using Portland cement as a solidification agent and natural or thiol-functionalised zeolite as a stabilisation agent. Not only is a high stabilisation efficiency (lowered the Toxicity Characteristic Leaching Procedure Hg by above 10%) obtained, but also a lower dosage of solidification (for thiol-functionalised zeolite as stabilisation agent, 0.5 g g(-1) and 0.7 g g(-1) for chemically bonded phosphate ceramic and Portland cement, respectively) and stabilisation agents (for natural zeolite as stabilisation agent, 0.35 g g(-1) and 0.4 g g(-1) for chemically bonded phosphate ceramic and Portland cement, respectively) were used compared with the Portland cement process. Treated by thiol-functionalised zeolite and chemically bonded phosphate ceramic under optimum parameters, the waste containing 1500 mg Hg kg(-1) passed the Toxicity Characteristic Leaching Procedure test. Moreover, stabilisation/solidification technology using natural zeolite and chemically bonded phosphate ceramic also passed the Toxicity Characteristic Leaching Procedure test (the mercury waste containing 625 mg Hg kg(-1)). Moreover, the presence of chloride and phosphate did not have a negative effect on the chemically bonded phosphate ceramic/thiol-functionalised zeolite treatment process; thus, showing potential for future application in treatment of 'difficult-to-manage' mercury-contaminated wastes or landfill disposal with high phosphate and chloride content. © The Author(s) 2015.

Global D-brane models with stabilised moduli and light axions

NASA Astrophysics Data System (ADS)

Cicoli, Michele

2014-03-01

We review recent attempts to try to combine global issues of string compactifications, like moduli stabilisation, with local issues, like semi-realistic D-brane constructions. We list the main problems encountered, and outline a possible solution which allows globally consistent embeddings of chiral models. We also argue that this stabilisation mechanism leads to an axiverse. We finally illustrate our general claims in a concrete example where the Calabi-Yau manifold is explicitly described by toric geometry.

Management of shoulder instability in a military population.

PubMed

Pimple, M K; DaCosta, A; Clasper, J C

2008-03-01

Recurrent instability is common after shoulder dislocation in the young, particularly those engaged in physical jobs or sport. The management of recurrent traumatic shoulder instability is predominantly operative. However, the best method of surgery i.e. open or arthroscopic is still a matter of debate. We have developed an algorithm to decide on the choice of surgery and the aim of this study is to report this and compare the two different groups of military patients. A retrospective review of all shoulder stabilisations performed on military personnel, by a single surgeon, between August 2004 and August 2005 at a district general hospital serving both military and civilian population was undertaken. The presentation, clinical and operative findings were noted and compared in the groups treated by arthroscopic or open stabilisation. Using our protocol 39 shoulder stabilisations were performed in military personnel. Of the shoulders, 25 (64%) underwent arthroscopic and 14 (36%) underwent open stabilisation. The indication for surgery was more than 2 episodes of shoulder dislocation. Open surgery was found to be more common in those who had their first dislocation at a younger age. Bilateral shoulder laxity was the most common indication to choose the open method. Both open and arthroscopic stabilisation gave good results in the high demand military population. Only one patient had recurrent instability after arthroscopic procedure. However, this was not statistically significant when compared with open stabilisation.

Towards zero industrial waste: Utilisation of brick dust waste in sustainable construction.

PubMed

Kinuthia, J M; Nidzam, R M

2011-08-01

Laboratory investigations were carried out to establish the potential utilisation of brick dust (BD) in construction. The dust is a waste material from the cutting of fired clay bricks. Currently, the disposal of the dust is a problem to the brick fabrication company, and hence an environmental pollution concern. The dust was stabilised either used on its own or in combination with Pulverised Fuel Ash (PFA), a by-product material from coal combustion. The traditional stabilisers of lime and/or Portland Cement (PC) were used as controls. The main aim was to use a sustainable stabiliser material, where these stabilisers were partially replaced with Ground Granulated Blastfurnace Slag (GGBS), a by-product material from steel manufacture. Compacted cylinder test specimens were made at typical stabiliser contents and moist cured for up to 56 days prior to testing for compressive and California Bearing Ratio (CBR) strength tests, and to linear expansion during moist curing and subsequent soaking in water. The results obtained showed that partial substitution of the dust with PFA resulted in stronger material compared to using it on its own. The blended stabilisers achieved better performance. These results suggest technological, economic as well as environmental advantages of using the brick dust and similar industrial by-products to achieve sustainable infrastructure development with near zero industrial waste. Copyright © 2011 Elsevier Ltd. All rights reserved.

Modified tension band fixation and coracoclavicular stabilisation for unstable distal clavicle fracture.

PubMed

Choi, Sungwook; Kim, Sang-Rim; Kang, Hyunseong; Kim, Donghee; Park, Yong-Geun

2015-02-01

The purpose of this study was to report a new surgical technique for the treatment of unstable distal clavicle fracture with modified tension band fixation (MTBF) and coracoclavicular (CC) stabilisation, and evaluate the radiologic and clinical outcome of these patients. Thirteen patients who had a fracture of the distal clavicle (Neer classification type IIb) were treated with MTBF and CC stabilisation. After the CC stabilisation was performed with a suture anchor or flip button, internal fixation using MTBF was carried out. Each patient was followed up for a minimum of 12 months and their clinical and radiological results were analysed. The mean period required for fracture union was 12.6 (range, 8-24) weeks and union was successfully completed in all cases. The mean Constant score at the final follow-up was 94.7 (88-100); the modified University of California, Los Angeles (UCLA) shoulder rating scale was 31.3 points (range, 22-35). All patients returned to normal daily activities at an average of 3.7 months postoperatively (range, 3-5 months). One patient had a new fracture around drilled holes for CC stabilisation by inappropriate tunnelling. MTBF and CC stabilisation is a useful technique for treating an unstable distal clavicle fracture. This procedure provides minimal incision and stable fixation without causing any further acromioclavicular joint injury to those with distal clavicle fractures. Copyright © 2014 Elsevier Ltd. All rights reserved.

Selected heavy metals speciation in chemically stabilised sewage sludge

NASA Astrophysics Data System (ADS)

Wiśniowska, Ewa; Włodarczyk-Makuła, Marła

2017-11-01

Selected heavy metals (Pb, Ni, Cd) were analysed in soil, digested sewage sludge as well as in the sludge stabilised with CaO or Fenton's reagent. The dose of Fenton's reagent was as follows: Fe2+ = 1g.L-1, Fe2+/H2O2=1:100; stabilisation lasted for 2 h. Dose of CaO was equal to 1 g CaO.g d.m.-1 Total concentration of all metals in the digested sewage sludge was higher than in the soil. Chemical stabilisation of sludge with Fenton's reagent increased total metal content in the sludge as a result of total solids removal. Opposite effect was stated when the sludge was mixed with CaO. Also chemical fractions of heavy metals were identified (exchangeable, carbonate bound, iron oxides bound, organic and residual). The results indicate that stabilisation of the sludge with Fenton's reagent increased mobility of heavy metals compared to the digested sludge. Amendment of CaO increased percent share of examined metals in residual fraction, thus immobilised them and decreased their bioavailability.

Canadian University Acknowledgment of Indigenous Lands, Treaties, and Peoples.

PubMed

Wilkes, Rima; Duong, Aaron; Kesler, Linc; Ramos, Howard

2017-02-01

At many Canadian universities it is now common to publicly acknowledge Indigenous lands, treaties, and peoples. Yet, this practice has yet to be considered as a subject of scholarly inquiry. How does this practice vary and why? In this paper we describe the content and practice of acknowledgment, linking this content to treaty relationships (or lack thereof). We show that acknowledgment tends to be one of five general types: of land and title (British Columbia), of specific treaties and political relationships (Prairies), of multiculturalism and heterogeneity (Ontario), of no practice (most of Quebec), and of people, territory, and openness to doing more (Atlantic). Based on these results, we conclude that the fluidity of acknowledgment as a practice, including changing meanings depending on the positionality of the acknowledger, need to be taken into account. Plusieurs universités Canadien pratique une reconnaissance des territoires, des traités, et des peoples autochtone en publique. Cette pratique, cependant, n'a jamais été considérée comme une enquête savante. Dans ce projet nous regardons comment les reconnaissances varie par institution et pourquoi. Nous trouvons qu'il y a un lien entre le contenu des reconnaissances et les relations traité. On démontre cinq forme des reconnaissances: territoire et titre (Colombie britannique); traité spécifique and les relations politiques (Prairies); multiculturalisme et hétérogénéité (Ontario); l'absence (la majorité du Québec); et des peoples, territoire et volonté a plus faire (Atlantique). Nous concluons que la fluidité de la reconnaissance, comme pratique, est fluide et doit prendre en considération la position de la personne qui le fait. © 2017 Canadian Sociological Association/La Société canadienne de sociologie.

Stability and thermophysical studies on deep eutectic solvent based carbon nanotube nanofluid

NASA Astrophysics Data System (ADS)

Chen, Yan Yao; Walvekar, Rashmi; Khalid, Mohammad; Shahbaz, Kaveh; Gupta, T. C. S. M.

2017-07-01

Commercial coolants such as water, ethylene glycol and triethylene glycol possess very low thermal conductivity, high vapor pressure, corrosion issues and low thermal stability thus limiting the thermal enhancement of the nanofluids. Thus, a new type of base fluid known as deep eutectic solvents (DESs) is proposed in this work as a potential substitute for the conventional base fluid due to their unique solvent properties such as low vapor pressure, high thermal stability, biodegradability and non-flammability. In this work, 33 different DESs derived from phosphonium halide salt and ammonium halide salts were synthesised. Carbon nantubes (CNTs) with different concentrations (0.01 wt%-0.08 wt%) were dispersed into DESs with the help of sonication. Stability of the nanofluids were determined using both qualitative (visual observation) and quantitative (UV spectroscopy) approach. In addition, thermo-physical properties such as thermal conductivity, specific heat, viscosity and density were investigated. The stability results indicated that phosphonium based DESs have higher stability (up to 4 d) as compared to ammonium-based DESs (up to 3 d). Thermal enhancement of 30% was observed for ammonium based DES-CNT nanofluid whereas negative thermal enhancement was observed in phosphonium based DES-CNT nanofluid.

Stabilisation of perturbed chains of integrators using Lyapunov-based homogeneous controllers

NASA Astrophysics Data System (ADS)

Harmouche, Mohamed; Laghrouche, Salah; Chitour, Yacine; Hamerlain, Mustapha

2017-12-01

In this paper, we present a Lyapunov-based homogeneous controller for the stabilisation of a perturbed chain of integrators of arbitrary order r ≥ 1. The proposed controller is based on homogeneous controller for stabilisation of pure chain of integrators. The control of homogeneity degree is also introduced and various controllers are designed using this concept, namely a bounded-controller with minimum amplitude of discontinuous control and a controller with globally fixed-time convergence. The performance of the controller is validated through simulations.

FGM (Functionally Graded Material) Thermal Barrier Coatings for Hypersonic Structures - Design and Thermal Structural Analysis

DTIC Science & Technology

2007-06-29

than others. It was found that TZ-3Y-E, which is a partially stabilised zirconia powder , was particularly suitable. The percentage of ceramic powder...layered coatings The current ceramic powder that was being used was a fully stabilised zirconia powder TZ-0Y. However a readily available powder...TZ-3Y-E, partially stabilised zirconia powder , was available and utilised. These tests consisted of a combination of 3, 4 and 5 layers. In the

Diethylstilbestrol in fish tissue determined through subcritical fluid extraction and with GC-MS

NASA Astrophysics Data System (ADS)

Qiao, Qinghui; Shi, Nianrong; Feng, Xiaomei; Lu, Jie; Han, Yuqian; Xue, Changhu

2016-06-01

As the key point in sex hormone analysis, sample pre-treatment technology has attracted scientists' attention all over the world, and the development trend of sample preparation forwarded to faster and more efficient technologies. Taking economic and environmental concerns into account, subcritical fluid extraction as a faster and more efficient method has stood out as a sample pre-treatment technology. This new extraction technology can overcome the shortcomings of supercritical fluid and achieve higher extraction efficiency at relatively low pressures and temperatures. In this experiment, a simple, sensitive and efficient method has been developed for the determination of diethylstilbestrol (DES) in fish tissue using subcritical 1,1,1,2-tetrafluoroethane (R134a) extraction in combination with gas chromatography-mass spectrometry (GC-MS). After extraction, freezing-lipid filtration was utilized to remove fatty co-extract. Further purification steps were performed with C18 and NH2 solid phase extraction (SPE). Finally, the analyte was derived by heptafluorobutyric anhydride (HFBA), followed by GC-MS analysis. Response surface methodology (RSM) was employed to optimizing the extraction condition, and the optimized was as follows: extraction pressure, 4.3 MPa; extraction temperature, 26°C; amount of co-solvent volume, 4.7 mL. Under this condition, at a spiked level of 1, 5, 10 μg kg-1, the mean recovery of DES was more than 90% with relative standard deviations (RSDs) less than 10%. Finally, the developed method has been successfully used to analyzing the real samples.

Modélisation d'un transformateur à shunts magnétiques utilisé dans l'alimentation H.T. d'un générateur micro-ondes à magnétron

NASA Astrophysics Data System (ADS)

Chraygane, Mohamed; Teissier, Maurice; Jammal, Ahmad; Masson, Jean-Pierre

1994-11-01

The high voltage power supply for magnetron, used for the modular microwave generators in industrial applications, is of a classical design : a single phase leakage flux transformer supplying a cell, composed of a capacitor and a diode, which multiplies the voltage and stabilizes the current. A π model of this transformer is developed, taking the saturation phenomena and the stabilization process of the magnetron current into account. Three inductances are characterized by the non linear relations between flux and magnetizing current. This model was tested by E.M.T.P. software (Electro-Magnetic Transients Program), near the nominal state. The theoretical results were compared to experimental measurements with a good agreement. L'alimentation haute tension des magnétrons, utilisés comme source d'énergie microondes dans l'industrie, est de conception classique : un transformateur monophasé à fuites magnétiques alimentant une cellule doubleuse de tension et stabilisatrice de courant. Un schéma équivalent en π du transformateur est présenté, prenant en compte la saturation des différentes parties du fer et la stabilisation du courant du magnétron. Trois inductances sont caractérisées par les relations non linéaires entre flux et courant magnétisant. Ce modèle a été testé à l'aide du logiciel de calcul E.M.T.P. (Electro-Magnetic Transients Program), au voisinage du régime nominal. Les résultats théoriques, comparés aux mesures expérimentales, se trouvent en bon accord avec elles.

Stabilising falling liquid film flows using feedback control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, Alice B., E-mail: alice.thompson1@imperial.ac.uk; Gomes, Susana N.; Pavliotis, Grigorios A.

2016-01-15

Falling liquid films become unstable due to inertial effects when the fluid layer is sufficiently thick or the slope sufficiently steep. This free surface flow of a single fluid layer has industrial applications including coating and heat transfer, which benefit from smooth and wavy interfaces, respectively. Here, we discuss how the dynamics of the system are altered by feedback controls based on observations of the interface height, and supplied to the system via the perpendicular injection and suction of fluid through the wall. In this study, we model the system using both Benney and weighted-residual models that account for themore » fluid injection through the wall. We find that feedback using injection and suction is a remarkably effective control mechanism: the controls can be used to drive the system towards arbitrary steady states and travelling waves, and the qualitative effects are independent of the details of the flow modelling. Furthermore, we show that the system can still be successfully controlled when the feedback is applied via a set of localised actuators and only a small number of system observations are available, and that this is possible using both static (where the controls are based on only the most recent set of observations) and dynamic (where the controls are based on an approximation of the system which evolves over time) control schemes. This study thus provides a solid theoretical foundation for future experimental realisations of the active feedback control of falling liquid films.« less

Desflurane inhalation before ischemia increases ischemia-reperfusion-induced vascular leakage in isolated rabbit lungs.

PubMed

Oshima, Yoshiaki; Sakamoto, Seiji; Yamasaki, Kazumasa; Mochida, Shinsuke; Funaki, Kazumi; Moriyama, Naoki; Otsuki, Akihiro; Endo, Ryo; Nakasone, Masato; Takahashi, Shunsaku; Harada, Tomomi; Minami, Yukari; Inagaki, Yoshimi

2016-01-01

Isoflurane and sevoflurane protect lungs with ischemia-reperfusion (IR) injury. We examined the influence of desflurane on IR lung injury using isolated rabbit lungs perfused with a physiological salt solution. The isolated lungs were divided into three groups: IR, desflurane-treated ischemia-reperfusion (DES-IR), and ventilation/perfusion-continued control (Cont) groups (n = 6 per group). In the DES-IR group, inhalation of desflurane at 1 minimum alveolar concentration (MAC) was conducted in a stable 30-min phase. In the IR and DES-IR groups, ventilation/perfusion was stopped for 75 min after the stable phase. Subsequently, they were resumed. Each lung was placed on a balance, and weighed. Weight changes were measured serially throughout this experiment. The coefficient of filtration (K fc ) was determined immediately before ischemia and 60 min after reperfusion. Furthermore, bronchoalveolar lavage fluid (BALF) was collected from the right bronchus at the completion of the experiment. After the completion of the experiment, the left lung was dried, and the lung wet-to-dry weight ratio (W/D) was calculated. The K fc values at 60 min after perfusion were 0.40 ± 0.13 ml/min/mmHg/100 g in the DES-IR group, 0.26 ± 0.07 ml/min/mmHg/100 g in the IR group, and 0.22 ± 0.08 (mean ± SD) ml/mmHg/100 g in the Cont group. In the DES-IR group, the K fc at 60 min after the start of reperfusion was significantly higher than in the other groups. In the DES-IR group, W/D was significantly higher than in the Cont group. In the DES-IR group, the BALF concentrations of nitric oxide metabolites were significantly higher than in the other groups. In the DES-IR group, the total amount of vascular endothelial growth factor in BALF was significantly higher than in the Cont group. The pre-inhalation of desflurane at 1 MAC exacerbates pulmonary IR injury in isolated/perfused rabbit lungs.

Time course of the acute effects of core stabilisation exercise on seated postural control.

PubMed

Lee, Jordan B; Brown, Stephen H M

2017-09-20

Core stabilisation exercises are often promoted for purposes ranging from general fitness to high-performance athletics, and the prevention and rehabilitation of back troubles. These exercises, when performed properly, may have the potential to enhance torso postural awareness and control, yet the potential for achieving immediate gains has not been completely studied. Fourteen healthy young participants performed a single bout of non-fatiguing core stabilisation exercise that consisted of repeated sets of 2 isometric exercises, the side bridge and the four-point contralateral arm-and-leg extension. Seated postural control, using an unstable balance platform on top of a force plate, was assessed before and after exercise, including multiple time points within a 20-minute follow-up period. Nine standard postural control variables were calculated at each time point, including sway displacement and velocity ranges, root mean squares and cumulative path length. Statistical analysis showed that none of the postural control variables were significantly different at any time point following completion of core stabilisation exercise. Thus, we conclude that a single bout of acute core stabilisation exercise is insufficient to immediately improve seated trunk postural control in young healthy individuals.

Clinical stabilisation with lacosamide of mood disorder comorbid with PTSD and fronto-temporal epilepsy.

PubMed

Cuomo, Ilaria; Kotzalidis, Georgios D; De Filippis, Sergio

2017-08-23

Mood disorders are often complicated by comorbidity with epilepsy. Anxiety and personality disorders may worsen prognosis and treatment outcome. Lacosamide has been recently introduced as adjunctive treatment for partial epilepsy. Its mechanism consists of selective slow inactivation of voltage-gated sodium channels, thus promoting an extended stabilisation of cell membranes. Antiepileptic drugs have been largely used since the 1950s in psychiatry as mood stabilisers due to their membrane stabilising and anti-kindling effects. Like lithium, antiepileptic drugs are first choice treatment for Bipolar and Cyclothymic Disorders. We tested the efficacy of the most recent antiepileptic medication, lacosamide, in a patient with simultaneously occurring cyclothymic disorder, severe post-traumatic stress disorder, and fronto-temporal epilepsy. Lacosamide was titrated up to 200 mg/day, added on ongoing 750 mg/day lithium, 15 mg/day oral aripiprazole then switched to 400 mg/month long-acting aripiprazole, and 2 mg/day N-desmethyldiazepam. We observed EEG normalisation one month later, along with reduced anxiety and an additive effect to lithium-induced stabilisation of mood fluctuations since the second week of lacosamide addition. Further studies with this drug in the bipolar spectrum are warranted.

Some Recent Developments in Turbulence Closure Modeling

NASA Astrophysics Data System (ADS)

Durbin, Paul A.

2018-01-01

Turbulence closure models are central to a good deal of applied computational fluid dynamical analysis. Closure modeling endures as a productive area of research. This review covers recent developments in elliptic relaxation and elliptic blending models, unified rotation and curvature corrections, transition prediction, hybrid simulation, and data-driven methods. The focus is on closure models in which transport equations are solved for scalar variables, such as the turbulent kinetic energy, a timescale, or a measure of anisotropy. Algebraic constitutive representations are reviewed for their role in relating scalar closures to the Reynolds stress tensor. Seamless and nonzonal methods, which invoke a single closure model, are reviewed, especially detached eddy simulation (DES) and adaptive DES. Other topics surveyed include data-driven modeling and intermittency and laminar fluctuation models for transition prediction. The review concludes with an outlook.

Production process stability - core assumption of INDUSTRY 4.0 concept

NASA Astrophysics Data System (ADS)

Chromjakova, F.; Bobak, R.; Hrusecka, D.

2017-06-01

Today’s industrial enterprises are confronted by implementation of INDUSTRY 4.0 concept with basic problem - stabilised manufacturing and supporting processes. Through this phenomenon of stabilisation, they will achieve positive digital management of both processes and continuously throughput. There is required structural stability of horizontal (business) and vertical (digitized) manufacturing processes, supported through digitalised technologies of INDUSTRY 4.0 concept. Results presented in this paper based on the research results and survey realised in more industrial companies. Following will described basic model for structural process stabilisation in manufacturing environment.

Dynamic Stability Parameters

DTIC Science & Technology

1978-05-01

Kingdom, the United States and West Germany. 1. INTRODUCTION The modern aerospace vehicle is exposed - much more often than in the past - to unsteady...l’Atude de la stabilit6 dynamique A grande incidence. 1 - INTRODUCTION .- L’Institut de Mdcanique des Fluides de Lille ddveloppe depuis sa crdation en...de l’avion en tenant compta de cec caractdrictiques propras (example -. introduction dec modes snuplec). Catte seconds pracddure act actuellement

Technical Evaluation Report on the Fluid Dynamics Panel Symposium on Vortex Flow Aerodynamics Held in Scheveningen, The Netherlands, 1-4 October 1990 (L’Aerodynamiques des Ecoulements Tourbillonnaires)

DTIC Science & Technology

1992-04-01

Canadai Professor J. Jimenez Escuela Tcniea Superior dc Prot. A. Bonnet Inenieros Aeronauticos Department Airodynarmque Dept. de Mecanica de Fluidos... Mecanica de Fluido provided with pre-prints or summaries of papers to be Plaza Cardenal Cisneros 3 presented in advance of the meeting. 28040 Madrid

Head stabilisation in fast running lizards.

PubMed

Goyens, Jana; Aerts, Peter

2018-04-01

The cyclic patterns of terrestrial animal locomotion are frequently perturbed in natural environments. The terrain can be complex or inclined, the substrate can move unexpectedly and animals can misjudge situations. Loosing stability due to perturbations increases the probability of capture by predators and decreases the chance of successful prey capture and winning intraspecific battles. When controlled corrective actions are necessary to negotiate perturbations, animals rely on their exteroceptive and proprioceptive senses to monitor the environment and their own body movements. The vestibular system in the inner ear perceives linear and angular accelerations. This information enables gaze stabilisation and the creation of a stable, world-bound reference frame for the integration of the information of other senses. During locomotion, both functions are known to be facilitated by head stabilisation in several animals with an erect posture. Animals with a sprawled body posture, however, undergo very large body undulations while running. Using high speed video recordings, we tested whether they nevertheless stabilise their head during running, and how this is influenced by perturbations. We found that running Acanthodactylus boskianus lizards strongly stabilise their head yaw rotations when running on a flat, straight runway: the head rotation amplitude is only 4.76±0.99°, while the adjacent trunk part rotates over 27.0±3.8°. Lateral head translations are not stabilised (average amplitude of 7.4±2.0mm). When the lizards are experimentally perturbed by a large and unexpected lateral substrate movement, lateral translations of both the head and the body decrease (on average by 1.52±0.81mm). At the same time, the rotations of the head and trunk also decrease (on average by 1.62°±7.21°). These results show that head stabilisation intensifies because of the perturbation, which emphasises the importance of vestibular perception and balance in these fast and manoeuvrable animals. Copyright © 2017 Elsevier GmbH. All rights reserved.

The effect of environmental conditions and soil physicochemistry on phosphate stabilisation of Pb in shooting range soils.

PubMed

Sanderson, Peter; Naidu, Ravi; Bolan, Nanthi

2016-04-01

The stabilisation of Pb in the soil by phosphate is influenced by environmental conditions and physicochemical properties of the soils to which it is applied. Stabilisation of Pb by phosphate was examined in four soils under different environmental conditions. The effect of soil moisture and temperature on stabilisation of Pb by phosphate was examined by measurement of water extractable and bioaccessible Pb, sequential fractionation and X-ray absorption spectroscopy. The addition of humic acid, ammonium nitrate and chloride was also examined for inhibition or improvement of Pb stability with phosphate treatment. The effect of moisture level varied between soils. In soil MB and DA a soil moisture level of 50% water holding capacity was sufficient to maximise stabilisation of Pb, but in soil TV and PE reduction in bioaccessible Pb was inhibited at this moisture level. Providing moisture at twice the soil water holding capacity did not enhance the effect of phosphate on Pb stabilisation. The difference of Pb stability as a result of incubating phosphate treated soils at 18 °C and 37 °C was relatively small. However wet-dry cycles decreased the effectiveness of phosphate treatment. The reduction in bioaccessible Pb obtained was between 20 and 40% with the most optimal treatment conditions. The reduction in water extractable Pb by phosphate was substantial regardless of incubation conditions and the effect of different temperature and soil moisture regimes was not significant. Selective sequential extraction showed phosphate treatment converted Pb in fraction 1 (exchangeable, acid and water soluble) to fraction 2 (reducible). There were small difference in fraction 4 (residual) Pb and fraction 1 as a result of treatment conditions. X-ray absorption spectroscopy of stabilised PE soil revealed small differences in Pb speciation under varying soil moisture and temperature treatments. The addition of humic acid and chloride produced the greatest effect on Pb speciation in phosphate treated soils. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

A functional role of the extracellular domain of Crumbs in cell architecture and apicobasal polarity.

PubMed

Letizia, Annalisa; Ricardo, Sara; Moussian, Bernard; Martín, Nicolás; Llimargas, Marta

2013-05-15

Regulated cell shape changes in epithelial cells, which contribute to most organs and tissues, are at the basis of morphogenesis. Crumbs (Crb) is an essential apical determinant controlling epithelial apicobasal polarity. Here we provide evidence for a novel role of Crb apical localisation and stabilisation in controlling cell shape through apical domain organisation and adherens junction positioning. We find that Crb apical stabilisation requires the extracellular domain. In vivo results from Drosophila suggest that the extracellular domain assists Crb apical stabilisation by mediating Crb-Crb interactions at opposing cell membranes. We further confirm Crb-Crb extracellular interactions by showing that the extracellular domain of Crb is sufficient to promote cell aggregation in vitro. Furthermore, we report that Crb apical stabilisation mediated by the extracellular domain is also required for maintenance of Crb apicobasal polarity. Our results provide new insights into the mechanisms of apicobasal polarity and the cellular mechanisms of tissue architecture.

Arthroscopic procedures for the treatment of anterior shoulder instability: local experiences.

PubMed

Choi, S T; Tse, P Y T

2005-04-01

To review the outcomes of arthroscopic stabilisation procedures for the treatment of recurrent anterior shoulder dislocation. Retrospective study. Regional hospital, Hong Kong. Patients receiving arthroscopic stabilisation procedures for recurrent anterior shoulder dislocation between 1999 and 2003. Functional outcomes including pain, range of motion, and activity level were assessed using the Constant score. Intra-operative findings were also discussed. A total of 18 arthroscopic stabilisation procedures were performed for the treatment of recurrent shoulder instability. Two cases converted to open procedures were excluded from this review. The overall outcomes were good and seven patients reported a full recovery. Fourteen out of 16 patients reported minimal or no pain, and the mean Constant score was 80. There were no cases of re-dislocation and no major complication was noted. All the reviewed patients had a satisfactory functional recovery. Therefore, we believe that the use of arthroscopic stabilisation procedure can produce a favourable outcome for appropriate shoulder pathologies.

Prise en charge des traumatismes graves du rein

PubMed Central

Lakmichi, Mohamed Amine; Jarir, Redouane; Sadiki, Bader; Zehraoui; Bentani; Wakrim, Bader; Dahami, Zakaria; Moudouni; Sarf, Ismail

2015-01-01

Les traumatismes graves du rein de grade III, IV et V selon la classification de l'Amercan Society for Surgery For Trauma (ASST) sont plus rares et se retrouvent dans 5% des cas en moyenne. Leur prise en charge est souvent délicate, nécessitant alors des centres expérimentés dotés de moyen adéquats d'imagerie (scanner spiralé). Cependant, durant ces dernières années, la prise en charge de ces traumatismes a évolué vers une attitude de moins en moins chirurgicale grâce à l’évolution des techniques de la radiologie interventionnelle, de l'endourologie et des moyens de surveillance aux urgences et de réanimation. L'objectif de cette étude est d’évaluer notre expérience dans la prise en charge des traumatismes rénaux de haut grade. Notre étude rétrospective porte sur 25 cas de traumatismes grave du rein de grade III, IV et V selon la classification de l'ASST, colligés entre Janvier 2002 et Juin 2009 au service d'urologie du centre Hospitalier Universitaire Mohammed VI, Université Cadi Ayyad de Marrakech, Maroc. Nous avons étudié les données épidémiologiques, les signes cliniques et biologiques à l'admission (état de choc hémorragique, taux d'hémoglobine), les données radiologiques (échographie et scanner), les lésions associées, la prise en charge thérapeutique et les complications. L’âge moyen de nos patients était de 24,9 ans 15 et 58 ans, avec une prédominance masculine (sex-ratio = 7, 3). Le rein droit était intéressé dans 15 cas (60%). Le traumatisme rénal était fermé dans 15 cas, et ouvert par arme blanche dans 10 cas. Huit patients se sont présentés en état de choc hémorragique (32%). Une anémie inférieur à 10g /100ml a été observée dans 10 cas (40%). L'uroscanner fait systématiquement à l'admission a retrouvé un grade III (10 cas), grade IV (13 cas) et grade V (2 cas). La prise en charge a consisté en une exploration chirurgicale avec néphrectomie chez 2 cas de Grade IV pour une instabilité hémodynamique. Une surveillance active clinique, biologique, et radiologique a été préconisée dans 23 cas (92%). Le scanner de contrôle fait à J7, a objectivé une stabilisation des lésions dans 17 cas et la constitution d'un urinome dans 2 cas drainé par sonde double J. Une néphrectomie d'hémostase était nécessaire dans 4 cas de grade IV (3 cas) et de grade V (1 cas). Un patient est décédé à J2 d'un traumatisme ouvert grade IV suite à une hémorragie foudroyante. La durée moyenne d'hospitalisation était de 17 jours (6-75 jours). A travers notre étude, on conforte l'attitude conservatrice recommandée actuellement dans la prise en charge de la plupart des traumatismes graves du rein en l'absence d'une instabilité hémodynamique, grâce aux mesures de réanimation correcte, une surveillance rapprochée du patient et le recours aux moyens endoscopiques de drainage des voies excrétrices. Grace à cette attitude la plupart de nos patients (76%) on conservé leur unités rénales, extrêmement précieuses en particulier pour les patients sujets à la dégradation ultérieure de leur fonction rénale, leur permettant ainsi d’éviter de tomber dans l'hémodialyse ou de rentrer dans des programmes de greffe rénale. PMID:26090064

In situ and laboratory investigations of fluid flow through an argillaceous formation at different scales of space and time, Tournemire tunnel, southern France

NASA Astrophysics Data System (ADS)

Boisson, Jean-Yves; Bertrand, Lucien; Heitz, Jean-François; Golvan, Yann Moreau-Le

2001-01-01

In the context of a research and development program on waste disposal, an experimental site (Tournemire tunnel, Aveyron, France) was selected by the French Institute for Nuclear Protection and Safety (IPSN) in order to undertake studies on potential fluid flow at different scales of space and time within a 250-m-thick argillaceous formation. The argillite has a low natural water content ( 3-5%) and very low radii access porosity. Diffusion (tritiated water) coefficients (1×10-12 to 2×10-11 m2/s) and hydraulic conductivities derived from different types of laboratory tests (10-14 to 10-13 m/s) are characteristics of a very low-permeable rock. In situ hydraulic tests (including long-term hydraulic-head measurements) were used to obtain values for hydraulic head and hydraulic conductivity at a scale of 1-10 m (10-13 to 10-11 m/s). Despite uncertainties on these data (due to a scale factor, presence of fissures, and possible artefacts due to hydro-chemo-mechanical coupling), it is expected that fluid flow is essentially governed by diffusion processes. Identification of possible natural flows at larger scales of time and space was investigated using natural isotopic tracers from interstitial fluids. Modelling, based on the deuterium profile along the clay formation and assuming pure diffusion processes, provides estimations of possible flow times. However, lack of knowledge concerning the past geological evolution of the site and the possible role of a fracture network do not permit reduction of uncertainties on these estimations at this stage. Résumé. Dans le cadre de son programme de recherche et développement sur les stockages de déchets, un site expérimental (tunnel de Tournemire, Aveyron, France) a été sélectionné par l'Institut de Protection et Sûreté Nucléaire (IPSN) pour conduire des études sur les possibilités de transferts de fluides à différentes échelles de temps et d'espace au sein d'une formation argileuse de 250 m d'épaisseur. L'argilite est caractérisée par de faibles teneurs en eau ( 3-5%) et de très petits rayons d'accès de pores. Les coefficients de diffusion à l'eau tritiée (1×10-12 à 2×10-11 m2/s) et les conductivités hydrauliques déduites de différents types d'essais au laboratoire (10-13 à 10-14 m/s) sont caractéristiques d'une roche très imperméable. Des tests hydrauliques in situ (y compris une mesure de charge à long terme) ont fourni des valeurs approchées des charges et un ordre de grandeur des perméabilités à l'échelle de 1-10 m (10-11 à 10-13 m/s). En dépit des incertitudes sur ces données (facteur d'échelle, présence de fissures, et artéfacts possibles dus aux couplages hydro-chimique et mécanique) on suppose que les transferts sont essentiellement gouvernés par des processus diffusifs. La reconnaissance de transferts naturels possible à une plus grande échelle de temps et d'espace a été étudiée à partir des traceurs isotopiques naturels des fluides interstitiels. Une modélisation, basée sur un profil en deutérium le long de la colonne argileuse et postulant un processus diffusif a permis de proposer une estimation de temps de transfert possible, mais le manque de connaissances précises au stade actuel de l'étude concernant l'évolution géologique passée du site et le rôle possible de la fracturation ne permet pas de réduire les incertitudes constatées sur ces estimations. Resumen. Dentro del contexto de un programa de investigación y desarrollo para la eliminación de residuos, el Instituto Francés de Protección Nuclear y Seguridad seleccionó un emplazamiento experimental en el túnel de Tournemire (Aveyron, Francia) para llevar a cabo estudios sobre el flujo potencial de fluídos a diferentes escalas temporales y espaciales, en una formación arcillosa de 250 m de espesor. La argilita tiene un contenido natural bajo de agua ( 3-5%) y una porosidad accesible muy pequeña. Los coeficientes de difusión de agua con tritio (entre 10-12 y 2×10-11 m2/s) y las conductividades hidráulicas calculadas a partir de diferentes ensayos de laboratorio (entre 10-13 y 10-14 m/s) son característicos de rocas de muy baja permeabilidad. Se hicieron ensayos hidráulicos in-situ (incluyendo medidas de nivel piezométrico de larga duración) para obtener valores del nivel piezométrico y de la conductividad hidráulica a una escala de 1-10 m (con valores entre 10-11 y 10-13 m/s). A pesar de las incertidumbres sobre estos datos (debido a factores de escala, a la presencia de fisuras y a posibles artificios ocasionados por el acoplamiento hidro-quimiomecánico), se espera que el flujo de fluídos esté esencialmente controlado por procesos de difusión. La identificación de posibles flujos naturales a escalas temporales y espaciales mayores fue investigada mediante trazadores isotópicos naturales del fluído intersticial. La modelación, basada en el perfil de deuterio a lo largo de la formación de arcilla y en la hipótesis de procesos puramente difusivos, proporciona estimaciones de posibles tiempos de tránsito. Sin embargo, la falta de conocimiento sobre la evolución geológica del lugar y sobre el rol potencial de una red de fracturas no permite reducir las incertidumbres asociadas, en el momento actual, a dichas estimaciones.

Monitoring artificially stimulated fluid movement in the Cretaceous Dakota aquifer, western Kansas

NASA Astrophysics Data System (ADS)

Macfarlane, Allen; Förster, Andrea; Merriam, Daniel; Schrötter, Jörg; Healey, John

2002-10-01

Aquifer properties can be evaluated by monitoring artificially stimulated fluid movements between wells, if the fluid is heated. Changes in the temperature profile recorded in observation wells indicate the flow path of the heated fluid, which in effect acts as a tracer. A fluid-flow experiment in the Cretaceous Dakota Formation at the Hodgeman County site, west-central Kansas, demonstrated the advantage of using the distributed optical-fiber temperature sensing method for monitoring transient temperature conditions in this hydrological application. The fluid flow in the aquifer was increased by producing water from a pumping well and injecting heated water in an injection well 13 m (43 ft) distant from the pumping well. The time-temperature series data obtained and compared with results from previous pumping tests point to interwell heterogeneity of the aquifer and to a zone in the sandstone aquifer of high hydraulic conductivity. However, the experiment would have allowed further clarification of aquifer heterogeneity and thermal properties if at least one observation well had been present between the injection and production wells. Résumé. Les caractéristiques d'un aquifère peuvent être évaluées en effectuant un suivi des mouvements du fluide stimulés artificiellement entre des puits, si le fluide est chauffé. Les variations de profils de température enregistrés dans les puits d'observation donnent des informations sur les directions d'écoulement du fluide chauffé, qui en fait se comporte comme un traceur. Réalisée dans la formation crétacée de Dakota, sur le site du Comté de Hodgeman (centre-ouest du Kansas), une expérience a démontré l'intérêt d'utiliser la méthode de détection distribuée de température par fibres optiques pour suivre les variations de température dans cette application hydrologique. L'écoulement du fluide dans l'aquifère a été favorisé en extrayant de l'eau par pompage et en injectant de l'eau chaude dans un puits d'injection distant de 13 m du puits de pompage. La chronique de température obtenue et comparée aux résultats d'essais de pompage précédents fait apparaître l'hétérogénéité de l'aquifère entre les puits et l'existence d'une zone de forte conductivité hydraulique dans l'aquifère de grès. Toutefois, l'expérience aurait fourni des éclaircissements supplémentaires sur l'hétérogénéité de l'aquifère et sur ses propriétés thermiques si au moins un puits d'observation avait été placé entre le puits d'injection et le puits de pompage. Resumen. Se puede evaluar las propiedades de un acuífero mediante la observación del movimiento de un fluido, calentado artificialmente, entre pozos. Los cambios registrados en el perfil de temperatura de los pozos de observación indican la trayectoria del fluido calentado, el cual actúa como un trazador. Un experimento de este tipo que se realizó en la formación cretácica de Dakota, en el condado de Hodgeman (porción occidental del centro de Kansas, Estados Unidos de América), demostró la ventaja de utilizar el método del sensor de temperatura con fibra óptica distribuída para medir condiciones transitorias de temperatura en esta aplicación hidrológica. El flujo del fluido en el acuífero aumentó con el bombeo de un pozo y la inyección de agua caliente en otro sondeo, que distaba 13 m (43 pies) del primero. Las series de temperatura obtenidas y comparadas con resultados de ensayos de bombeo previos resaltan la heterogeneidad del acuífero entre ambos pozos, así como la existencia de una zona de elevada conductividad hidráulica en el acuífero de la arenisca. Sin embargo, el experimento habría proporcionado más información sobre la heterogeneidad de la formación y sus propiedades termales si se hubiera dispuesto al menos de un punto de observación entre los pozos de inyección y bombeo.

Generating higher-order quantum dissipation from lower-order parametric processes

NASA Astrophysics Data System (ADS)

Mundhada, S. O.; Grimm, A.; Touzard, S.; Vool, U.; Shankar, S.; Devoret, M. H.; Mirrahimi, M.

2017-06-01

The stabilisation of quantum manifolds is at the heart of error-protected quantum information storage and manipulation. Nonlinear driven-dissipative processes achieve such stabilisation in a hardware efficient manner. Josephson circuits with parametric pump drives implement these nonlinear interactions. In this article, we propose a scheme to engineer a four-photon drive and dissipation on a harmonic oscillator by cascading experimentally demonstrated two-photon processes. This would stabilise a four-dimensional degenerate manifold in a superconducting resonator. We analyse the performance of the scheme using numerical simulations of a realisable system with experimentally achievable parameters.

Soret and Dufour effects on thermohaline convection in rotating fluids

NASA Astrophysics Data System (ADS)

Duba, C. T.; Shekar, M.; Narayana, M.; Sibanda, P.

2016-07-01

Using linear and weakly nonlinear stability theory, the effects of Soret and Dufour parameters are investigated on thermohaline convection in a horizontal layer of rotating fluid, specifically the ocean. Thermohaline circulation is important in mixing processes and contributes to heat and mass transports and hence the earth's climate. A general conception is that due to the smallness of the Soret and Dufour parameters their effect is negligible. However, it is shown here that the Soret parameter, salinity and rotation stabilise the system, whereas temperature destabilises it and the Dufour parameter has minimal effect on stationary convection. For oscillatory convection, the analysis is difficult as it shows that the Rayleigh number depends on six parameters, the Soret and Dufour parameters, the salinity Rayleigh number, the Lewis number, the Prandtl number, and the Taylor number. We demonstrate the interplay between these parameters and their effects on oscillatory convection in a graphical manner. Furthermore, we find that the Soret parameter enhances oscillatory convection whereas the Dufour parameter, salinity Rayleigh number, the Lewis number, and rotation delay instability. We believe that these results have not been elucidated in this way before for large-scale fluids. Furthermore, we investigate weakly nonlinear stability and the effect of cross diffusive terms on heat and mass transports. We show the existence of new solution bifurcations not previously identified in literature.

Découverte et signification d'une paragenèse à ilménite zincifère dans les métapélites des Jebilet centrales (Maroc)Occurrence and significance of zincian ilmenite in low-pressure metapelites from central Jebilet (Morocco)

NASA Astrophysics Data System (ADS)

Essaifi, Abderrahim; Ballèvre, Michel; Marignac, Christian; Capdevila, Ramon

2001-10-01

A zincian ilmenite paragenesis is found in metapelites from a contact metamorphic zone (central Jebilet, Morocco) induced by the emplacement of microgranitic intrusions. The zincian ilmenite is mainly preserved in syntectonic andalusite porphyroblasts. The growth of zincian ilmenite is related either to sphalerite breakdown during prograde metamorphism, or to the pervasive flow of a mineralizing fluid within the metapelites. The chlorine-rich fluid carried zinc and other metals leached in the microgranites, during its flow to discharge zones which were probably the Jebilet sulfide deposits.

Aerothermodynamic Design, Review on Ground Testing and CFD (Conception aerothermodynamique, revue sur les essais au sol et dynamique des fluides informatisee)

DTIC Science & Technology

2010-04-01

Aerothermodynamic Design, Review on Ground Testing and CFD (RTO-EN-AVT-186) Executive Summary The Lecture Series focus on the presentation of...impulsions ITAM et les tubes à choc DLR HEG. Les sondes à réponse rapide et les techniques de mesures instables ont été présentées ainsi que les outils de

Synthesis and thermo-physical properties of deep eutectic solvent-based graphene nanofluids

NASA Astrophysics Data System (ADS)

Fang, Y. K.; Osama, M.; Rashmi, W.; Shahbaz, K.; Khalid, M.; Mjalli, F. S.; Farid, M. M.

2016-02-01

This study introduces a new class of heat transfer fluids by dispersing functionalised graphene oxide nanoparticles (GNPs) in ammonium and phosphonium-based deep eutectic solvents (DESs) without the aid of a surfactant. Different molar ratios of salts and hydrogen bond donors (HBD) were used to synthesise DESs for the preparation of different concentrations of graphene nanofluids (GNFs). The concentrations of GNPs were 0.01 wt%, 0.02 wt% and 0.05 wt %. Homogeneous and stable suspensions of nanofluids were obtained by high speed homogenisation and an ultrasonication process. The stability of the GNFs was determined through visual observation for 4 weeks followed by a centrifugal process (5000-20 000 rpm) for 30 min in addition to zeta potential studies. Dispersion of the GNPs in DES was observed using an optical microscope. The synthesised DES-based GNFs showed no particle agglomeration and formation of sediments in the nanofluids. Thermo-physical properties such as thermal conductivity and specific heat of the nanofluids were also investigated in this research. The highest thermal conductivity enhancement of 177% was observed. The findings of this research provide a new class of engineered fluid for heat transfer applications as a function of temperature, type and composition DESs as well as the GNPs concentration.

Synthesis and thermo-physical properties of deep eutectic solvent-based graphene nanofluids.

PubMed

Fang, Y K; Osama, M; Rashmi, W; Shahbaz, K; Khalid, M; Mjalli, F S; Farid, M M

2016-02-19

This study introduces a new class of heat transfer fluids by dispersing functionalised graphene oxide nanoparticles (GNPs) in ammonium and phosphonium-based deep eutectic solvents (DESs) without the aid of a surfactant. Different molar ratios of salts and hydrogen bond donors (HBD) were used to synthesise DESs for the preparation of different concentrations of graphene nanofluids (GNFs). The concentrations of GNPs were 0.01 wt%, 0.02 wt% and 0.05 wt %. Homogeneous and stable suspensions of nanofluids were obtained by high speed homogenisation and an ultrasonication process. The stability of the GNFs was determined through visual observation for 4 weeks followed by a centrifugal process (5000-20,000 rpm) for 30 min in addition to zeta potential studies. Dispersion of the GNPs in DES was observed using an optical microscope. The synthesised DES-based GNFs showed no particle agglomeration and formation of sediments in the nanofluids. Thermo-physical properties such as thermal conductivity and specific heat of the nanofluids were also investigated in this research. The highest thermal conductivity enhancement of 177% was observed. The findings of this research provide a new class of engineered fluid for heat transfer applications as a function of temperature, type and composition DESs as well as the GNPs concentration.

Differential approach to strategies of segmental stabilisation in postural control.

PubMed

Isableu, Brice; Ohlmann, Théophile; Crémieux, Jacques; Amblard, Bernard

2003-05-01

The present paper attempts to clarify the between-subjects variability exhibited in both segmental stabilisation strategies and their subordinated or associated sensory contribution. Previous data have emphasised close relationships between the interindividual variability in both the visual control of posture and the spatial visual perception. In this study, we focused on the possible relationships that might link perceptual visual field dependence-independence and the visual contribution to segmental stabilisation strategies. Visual field dependent (FD) and field independent (FI) subjects were selected on the basis of their extreme score in a static rod and frame test where an estimation of the subjective vertical was required. In the postural test, the subjects stood in the sharpened Romberg position in darkness or under normal or stroboscopic illumination, in front of either a vertical or a tilted frame. Strategies of segmental stabilisation of the head, shoulders and hip in the roll plane were analysed by means of their anchoring index (AI). Our hypothesis was that FD subjects might use mainly visual cues for calibrating not only their spatial perception but also their strategies of segmental stabilisation. In the case of visual cue disturbances, a greater visual dependency to the strategies of segmental stabilisation in FD subjects should be validated by observing more systematic "en bloc" functioning (i.e. negative AI) between two adjacent segments. The main results are the following: 1. Strategies of segmental stabilisation differed between both groups and differences were amplified with the deprivation of either total vision and/or static visual cues. 2. In the absence of total vision and/or static visual cues, FD subjects have shown an increased efficiency of the hip stabilisation in space strategy and an "en bloc" operation of the shoulder-hip unit (whole trunk). The last "en bloc" operation was extended to the whole head-trunk unit in darkness, associated with a hip stabilisation in space. 3. The FI subjects have adopted neither a strategy of segmental stabilisation in space nor on the underlying segment, whatever the body segment considered and the visual condition. Thus, in this group, head, shoulder and hip moved independently from each other during stance control, roughly without taking into account the visual condition. The results, emphasising a differential weighting of sensory input involved in both perceptual and postural control, are discussed in terms of the differential choice and/or ability to select the adequate frame of reference common to both cognitive and motor spatial activities. We assumed that a motor-somesthetics "neglect" or a lack of mastering of these inputs/outputs rather than a mere visual dependence in FD subjects would generate these interindividual differences in both spatial perception and postural balance. This proprioceptive "neglect" is assumed to lead FD subjects to sensory reweighting, whereas proprioceptive dominance would lead FI subjects to a greater ability in selecting the adequate frame of reference in the case of intersensory disturbances. Finally, this study also provides evidence for a new interpretation of the visual field dependence-independence dimension in both spatial perception and postural control.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, J.P.; Holtsman, S.; Shellabarger, C.J.

Pellets containing 5 mg (/sup 3/H) diethylstilbestrol (DES) and 15 mg cholesterol were implanted S.C. in 84-day-old female Sprague-Dawley (S-D) and ACl rats. DES was released from the implanted pellets exponentially, and the release was not significantly different in S-D rats than in ACl rats. No mammary tumors developed in any treated or untreated S-D rats. In contrast, 90% of the DES-treated ACl rats developed mammary adenocarcinomas. A significant increase in the weight of the pituitary was noted in DES-treated ACl rats. The pituitarities of the treated ACl rats were 2 to 7 times as heavy as were controls, andmore » plasma prolactin levels were 10 to 40 times higher than in controls. In contrast, the pituitaries of treated S-D rats did not significantly increase in weight, and plasma prolactin levels were only 3 to 5 times higher than controls. The uteri of treated S-D rats were significantly heavier than those of control rats and contained large amounts of fluid. This effect was not seen in ACl rats. Although the release of DES from the implanted pellet was essentially the same in ACl and S-D rats, three distinctive strain differences in response to DES were noted: mammary adenocarcinomas were found only in treated ACl rats; pituitary prolactin-cell adenomas and associated elevated plasma prolactins levels were seen only in treated ACl rats; and pyometritis was induced only in treated S-D rats. Mammary adenocarcinomas and prolactin-cell adenoma responses in the treated ACl rats appear to be correlated with the increasing levels of plasma prolactin. This study demonstrates that the prolonged estrogen treatment of ACl and S-D female rats produces distinctly different mammary and pituitary neoplastic responses. This disparity in neoplastic responses appears to be reflected in the difference of degree to which the hypophysical prolactin cells are stimulated to grow and secrete hormone.« less

Security for whom? Stabilisation and civilian protection in Colombia.

PubMed

Elhawary, Samir

2010-10-01

This paper focuses on three periods of stabilisation in Colombia: the Alliance for Progress (1961-73) that sought to stem the threat of communist revolution in Latin America; Plan Colombia and President Alvaro Uribe's 'democratic security' policy (2000-07) aimed at defeating the guerrillas and negotiating a settlement with the paramilitaries; and the current 'integrated approach', adopted from 2007, to consolidate more effectively the state's control of its territory.(1) The paper assesses the extent to which these stabilisation efforts have enhanced the protection of civilians and ultimately finds that in all three periods there has been a disconnect between the discourse and the practice of stabilisation. While they have all sought to enhance security, in actual fact, they have privileged the security of the state and its allies at the expense of the effective protection of the civilian population. This has not only led to widespread human rights abuses but also has undermined the long-term stability being pursued. © 2010 The Author(s). Journal compilation © Overseas Development Institute, 2010.

Stabilising a victor's peace? Humanitarian action and reconstruction in eastern Sri Lanka.

PubMed

Goodhand, Jonathan

2010-10-01

This paper focuses on the 'Sri Lankan model' of counter-insurgency and stabilisation and its implications for humanitarian and development actors. The Sri Lanka case shows that discourses, policies and practices associated with 'stabilisation' are not confined to 'fragile state' contexts in which there is heavy (and often militarised) international engagement--even though exemplars such as Afghanistan and Iraq have tended to dominate debates on this issue. Rather than being a single template, the 'stabilisation agenda' takes on very different guises in different contexts, presenting quite specific challenges to humanitarian and development actors. This is particularly true in settings like Sri Lanka, where there is a strong state, which seeks to make aid 'coherent' with its own vision of a militarily imposed political settlement. Working in such environments involves navigating a highly-charged domestic political arena, shaped by concerns about sovereignty, nationalism and struggles for legitimacy. © 2010 The Author(s). Journal compilation © Overseas Development Institute, 2010.

Evaluation du niveau de connaissance des patients sur la gestion du traitement par les antis vitamines K dans le service de cardiologie de Ouagadougou

PubMed Central

Samadoulougou, André; Temoua Naibe, Dangwé; Mandi, Germain; Yameogo, Relwendé Aristide; Kabore, Elisé; Millogo, Georges; Yameogo, Nobila Valentin; Kologo, Jonas Koudougou; Thiam/Tall, Anna; Toguyeni, Boubacar Jean Yves; Zabsonre, Patrice

2014-01-01

Introduction Les antivitamines K (AVK), traitement anticoagulant oral le plus largement prescrit, posent un réel problème de santé publique du fait de leur risque iatrogène. L'objectif de cette étude était de préciser le niveau de connaissance des patients sur la gestion de leur traitement par les AVK. Méthodes Il s'est agi d'une enquête transversale descriptive réalisée au CHU-Yalgado Ouédraogo, sur une période de 03 mois : du 1er mars au 31 mai 2012. Un questionnaire a été administré aux patients bénéficiant d'un traitement AVK depuis au moins un mois. Résultats Soixante-dix patients ont été inclus dans l'étude dont 30 hommes. L'âge moyen était de 49 ans ± 16 ans. Les cardiopathies et la maladie thromboembolique veineuse justifiant l'institution du traitement AVK étaient retrouvées respectivement dans 58,6% et 41,4% des cas. Le nom de l'AVK et la raison exacte du traitement étaient connus respectivement dans 91,4% et 67,1% des cas. Plus de la moitié des patients (68,6%) savaient que les AVK rendaient le sang plus fluide. Quarante-six patients (65,7%) citaient l'INR comme examen biologique de surveillance du traitement et seulement 28 patients (40%) connaissaient les valeurs cibles. La majorité des patients ne connaissait pas les risques encourus en cas de surdosage (72,8%) et de sous-dosage (71,4%). Une automédication par anti-inflammatoire non stéroïdien était signalée par 18 patients (25,7%). Les choux (74,3%) et la laitue (62,9%), aliments à consommer avec modération, étaient les plus cités. Conclusion Les connaissances des patients sur la gestion des AVK étaient fragmentaires et insuffisantes pour assurer la sécurité et l'efficacité du traitement. La création d'un programme d'éducation thérapeutique sur les AVK s'avère alors nécessaire. PMID:25870741

The effects of ecological restoration on CO2 fluxes from a climatically marginal upland blanket bog

NASA Astrophysics Data System (ADS)

Dixon, Simon; Qassim, Suzane; Rowson, James; Worrall, Fred; Evans, Martin

2013-04-01

A legacy of gully incision, deposition of industrially-derived aerial pollutants, inappropriate management and wildfire has left large expanses of the topographic Bleaklow Plateau (Peak District National Park, England, UK) bare of vegetation and susceptible to massive erosion of the peat soils. The consequence of such degradation has been to decrease the capacity of the peatland on the plateau to provide important ecosystem services including; loss of net C sink function, discolouration of surface waters, mobilisation to surface waters of stored heavy metals and infilling of upland reservoirs with peat-derived sediment. In response to on-going and worsening degradation a programme of ecological restoration has been undertaken. Restoration methods include: seeding with a lawn grass mix; liming; fertilisation; slope stabilisation; and gully blocking. This talk will present data from a five-year, observational-study of CO2 fluxes from eight sites, with four sites sampling different restoration treatments and four sampling bare and least disturbed areas. The results of the analysis reveal that sites with revegetation alongside slope stabilisation were most productive and were the largest net (daylight hours) sinks of CO2. Unrestored, bare sites, while having relatively low gross fluxes of CO2 were the largest net sources of CO2. Revegetation without slope stabilisation took longer (~18 months) to show an impact on CO2 flux in comparison to the sites with slope stabilisation. Binary logistic regression indicated that a ten centimetre increase in water table depth decreases the odds of observing a net CO2 sink, on a given site, by up to 30%. Sites with slope stabilisation were between 5-8x more likely to be net CO2 sinks than the bare sites. Sites without slope stabilisation were only 2-2.3x more likely to be net CO2 sinks compared to the bare sites. The most important conclusion of this research is that revegetation appears to be effective at increasing the likelihood of net CO2 behaviour on degraded, climatically marginal blanket peat, with revegetation alongside slope stabilisation having the greatest impact.

Simulation of granular and gas-solid flows using discrete element method

NASA Astrophysics Data System (ADS)

Boyalakuntla, Dhanunjay S.

2003-10-01

In recent years there has been increased research activity in the experimental and numerical study of gas-solid flows. Flows of this type have numerous applications in the energy, pharmaceuticals, and chemicals process industries. Typical applications include pulverized coal combustion, flow and heat transfer in bubbling and circulating fluidized beds, hopper and chute flows, pneumatic transport of pharmaceutical powders and pellets, and many more. The present work addresses the study of gas-solid flows using computational fluid dynamics (CFD) techniques and discrete element simulation methods (DES) combined. Many previous studies of coupled gas-solid flows have been performed assuming the solid phase as a continuum with averaged properties and treating the gas-solid flow as constituting of interpenetrating continua. Instead, in the present work, the gas phase flow is simulated using continuum theory and the solid phase flow is simulated using DES. DES treats each solid particle individually, thus accounting for its dynamics due to particle-particle interactions, particle-wall interactions as well as fluid drag and buoyancy. The present work involves developing efficient DES methods for dense granular flow and coupling this simulation to continuum simulations of the gas phase flow. Simulations have been performed to observe pure granular behavior in vibrating beds. Benchmark cases have been simulated and the results obtained match the published literature. The dimensionless acceleration amplitude and the bed height are the parameters governing bed behavior. Various interesting behaviors such as heaping, round and cusp surface standing waves, as well as kinks, have been observed for different values of the acceleration amplitude for a given bed height. Furthermore, binary granular mixtures (granular mixtures with two particle sizes) in a vibrated bed have also been studied. Gas-solid flow simulations have been performed to study fluidized beds. Benchmark 2D fluidized bed simulations have been performed and the results have been shown to satisfactorily compare with those published in the literature. A comprehensive study of the effect of drag correlations on the simulation of fluidized beds has been performed. It has been found that nearly all the drag correlations studied make similar predictions of global quantities such as the time-dependent pressure drop, bubbling frequency and growth. In conclusion, discrete element simulation has been successfully coupled to continuum gas-phase. Though all the results presented in the thesis are two-dimensional, the present implementation is completely three dimensional and can be used to study 3D fluidized beds to aid in better design and understanding. Other industrially important phenomena like particle coating, coal gasification etc., and applications in emerging areas such as nano-particle/fluid mixtures can also be studied through this type of simulation. (Abstract shortened by UMI.)

Severe scombroid fish poisoning syndrome requiring aggressive fluid resuscitation in the emergency department: two case reports.

PubMed

Iannuzzi, M; D'Ignazio, N; Bressy, L; De Sio, A

2007-09-01

Scombroid fish poisoning (scombrotoxism, scombroid ichthyotoxicosis) is a food-related illness typically associated with the consumption of dark and white meat fish. Two patients presented to the emergency department. Metilprednisone 1000 mg and ranitidine 150 mg were administered initially. A large amount of crystalloids and colloids in in combination with vasoactive drugs were required to maintain normopressure. Levels of histamine and N-methylhistamine were far above the normal mean. Carboxyhemoglobin levels were also tested to exclude a superimposition of carbon monoxide intoxication. In both cases, major symptoms occurred and were treated aggressively. Early goal directed fluid therapy corrected the DO2/VO2 unbalance, due to a distributive pattern of hypovolemic impending shock, and permitted a rapid stabilisation of both patients. It is important to recognize the syndrome as an intoxication (rather than an allergic reaction) so that the source of the toxin can be identified and further cases prevented. It is also important to investigate where the fish was cooked (i.e. in an open space vs. closed space), to exclude the possibility of a concomitant carbon monoxide intoxication, which would require transfer the patient to a hospital facility equipped with a hyperbaric chamber.

Topology optimisation for natural convection problems

NASA Astrophysics Data System (ADS)

Alexandersen, Joe; Aage, Niels; Andreasen, Casper Schousboe; Sigmund, Ole

2014-12-01

This paper demonstrates the application of the density-based topology optimisation approach for the design of heat sinks and micropumps based on natural convection effects. The problems are modelled under the assumptions of steady-state laminar flow using the incompressible Navier-Stokes equations coupled to the convection-diffusion equation through the Boussinesq approximation. In order to facilitate topology optimisation, the Brinkman approach is taken to penalise velocities inside the solid domain and the effective thermal conductivity is interpolated in order to accommodate differences in thermal conductivity of the solid and fluid phases. The governing equations are discretised using stabilised finite elements and topology optimisation is performed for two different problems using discrete adjoint sensitivity analysis. The study shows that topology optimisation is a viable approach for designing heat sink geometries cooled by natural convection and micropumps powered by natural convection.

Computational Fluid Dynamic Solutions of Optimized Heat Shields Designed for Earth Entry

DTIC Science & Technology

2010-01-01

domain ρ = Density (kg/m3) σ = Stefan Boltzmann constant τ = Shear stress tensor τT−V = T-V relaxation time τe−V = e-V relaxation time xi φ = Sweep angle...Vehicle DES = Differential evolutionary Scheme DOR = Design Optimization Tools DPLR = Data Parallel Line Relaxation GSLR = Gauss- Seidel Line... Stefan - Boltzmann constant. This model provides accurate heating predictions, especially for the non-ablating heat-shields explored in this work. Various

Influence of Boussinesq coefficient on depth-averaged modelling of rapid flows

NASA Astrophysics Data System (ADS)

Yang, Fan; Liang, Dongfang; Xiao, Yang

2018-04-01

The traditional Alternating Direction Implicit (ADI) scheme has been proven to be incapable of modelling trans-critical flows. Its inherent lack of shock-capturing capability often results in spurious oscillations and computational instabilities. However, the ADI scheme is still widely adopted in flood modelling software, and various special treatments have been designed to stabilise the computation. Modification of the Boussinesq coefficient to adjust the amount of fluid inertia is a numerical treatment that allows the ADI scheme to be applicable to rapid flows. This study comprehensively examines the impact of this numerical treatment over a range of flow conditions. A shock-capturing TVD-MacCormack model is used to provide reference results. For unsteady flows over a frictionless bed, such as idealised dam-break floods, the results suggest that an increase in the value of the Boussinesq coefficient reduces the amplitude of the spurious oscillations. The opposite is observed for steady rapid flows over a frictional bed. Finally, a two-dimensional urban flooding phenomenon is presented, involving unsteady flow over a frictional bed. The results show that increasing the value of the Boussinesq coefficient can significantly reduce the numerical oscillations and reduce the predicted area of inundation. In order to stabilise the ADI computations, the Boussinesq coefficient could be judiciously raised or lowered depending on whether the rapid flow is steady or unsteady and whether the bed is frictional or frictionless. An increase in the Boussinesq coefficient generally leads to overprediction of the propagating speed of the flood wave over a frictionless bed, but the opposite is true when bed friction is significant.

Resolution of renal adenocarcinoma-induced secondary inappropriate polycythaemia after nephrectomy in two cats.

PubMed

Klainbart, Sigal; Segev, Gilad; Loeb, Emmanuel; Melamed, Dana; Aroch, Itamar

2008-07-01

Two cases of secondary, inappropriate polycythaemia caused by renal adenocarcinoma in domestic shorthair cats, are described. The cats were 9 and 12 years old and both were presented because of generalised seizures presumably due to hyperviscosity. Both cats had a markedly increased haematocrit (0.770 and 0.632 l/l) and thrombocytosis (744 x 10(9)/l and 926 x 10(9)/l). An abdominal ultrasound revealed a mass in the cranial pole of one kidney in both cats. Serum erythropoietin (EPO) concentration was within the reference interval (RI) in both cats but was inappropriately high considering the markedly increased haematocrit. The cats were initially stabilised and managed by multiple phlebotomies and intravenous fluid therapy and underwent nephrectomy of the affected kidney later on. Both the polycythaemia and thrombocytosis resolved following surgery. Postoperative serum EPO concentration, measured in one cat, decreased markedly. Histopathology of the affected kidneys confirmed a diagnosis of renal adenocarcinoma. Both cats were stable for an 8-month follow-up period; however, one cat had developed a stable chronic kidney disease (CKD), while the other was represented 8 months postoperatively due to dyspnoea, and had radiographic evidence of lung metastasis, presumably because of the spread of the original renal tumour and was euthanased. Initial stabilisation of polycythaemic cats should include multiple phlebotomies. Nephrectomy should be considered in cats with secondary, inappropriate, renal adenocarcinoma-related polycythaemia when only one kidney is affected by the tumour, and provided that the other kidney's function is satisfactory. Nephrectomy should be expected to resolve the polycythaemia and lead to normalisation of serum EPO concentration.

Computational Evaluation of Mixtures of Hydrofluorocarbons and Deep Eutectic Solvents for Absorption Refrigeration Systems.

PubMed

Abedin, Rubaiyet; Heidarian, Sharareh; Flake, John C; Hung, Francisco R

2017-10-24

We used computational tools to evaluate three working fluid mixtures for single-effect absorption refrigeration systems, where the generator (desorber) is powered by waste or solar heat. The mixtures studied here resulted from combining a widely used hydrofluorocarbon (HFC) refrigerant, R134a, with three common deep eutectic solvents (DESs) formed by mixing choline chloride (hydrogen bond acceptor, HBA) with urea, glycerol, or ethylene glycol as the hydrogen bond donor (HBD) species. The COSMOtherm/TmoleX software package was used in combination with refrigerant data from NIST/REFPROP, to perform a thermodynamic evaluation of absorption refrigeration cycles using the proposed working fluid mixtures. Afterward, classical MD simulations of the three mixtures were performed to gain insight on these systems at the molecular level. Larger cycle efficiencies are obtained when R134a is combined with choline chloride and ethylene glycol, followed by the system where glycerol is the HBD, and finally that where the HBD is urea. MD simulations indicate that the local density profiles of all species exhibit very sharp variations in systems containing glycerol or urea; furthermore, the Henry's law constants of R134a in these two systems are larger than those observed for the HFC in choline chloride and ethylene glycol, indicating that R134a is more soluble in the latter DES. Interaction energies indicate that the R134a-R134a interactions are weaker in the system where ethylene glycol is the HBD, as compared to in the other DES. Radial distribution functions confirm that in all systems, the DES species do not form strong directional interactions (e.g., hydrogen bonds) with the R134a molecules. Relatively strong interactions are observed between the Cl anions and the hydrogen atoms in R134a; however, the atom-atom interactions between R134a and the cation and HBD species are weaker and do not play a significant role in the solvation of the refrigerant. In all systems, R134a has the largest diffusion coefficients, followed by the HBD, the anion and the cation; the diffusion coefficients are the largest in the systems containing ethylene glycol, followed by those having glycerol and urea. This work is our first step toward our long-term goal of designing and demonstrating optimal working fluid mixtures for use in absorption refrigeration systems. Our results suggest that COSMO-RS can be used to perform a rapid screening of a large number of working fluid mixtures, and select a few candidates for further exploration using molecular simulations and experiments. These latter approaches can be used to refine the accuracy of the COSMO-RS predictions, and to optimize the selection of optimal working fluid mixtures for demonstration in absorption refrigeration systems powered by solar or waste heat sources.

Detached Eddy Simulation of the UH-60 Rotor Wake Using Adaptive Mesh Refinement

NASA Technical Reports Server (NTRS)

Chaderjian, Neal M.; Ahmad, Jasim U.

2012-01-01

Time-dependent Navier-Stokes flow simulations have been carried out for a UH-60 rotor with simplified hub in forward flight and hover flight conditions. Flexible rotor blades and flight trim conditions are modeled and established by loosely coupling the OVERFLOW Computational Fluid Dynamics (CFD) code with the CAMRAD II helicopter comprehensive code. High order spatial differences, Adaptive Mesh Refinement (AMR), and Detached Eddy Simulation (DES) are used to obtain highly resolved vortex wakes, where the largest turbulent structures are captured. Special attention is directed towards ensuring the dual time accuracy is within the asymptotic range, and verifying the loose coupling convergence process using AMR. The AMR/DES simulation produced vortical worms for forward flight and hover conditions, similar to previous results obtained for the TRAM rotor in hover. AMR proved to be an efficient means to capture a rotor wake without a priori knowledge of the wake shape.

Particle film growth driven by foam bubble coalescence.

PubMed

Binks, Bernard P; Clint, John H; Fletcher, Paul D I; Lees, Timothy J G; Taylor, Philip

2006-09-07

Water films stabilised by hydrophobic particles are found to spread rapidly up the inner walls of a glass vessel containing water and hydrophobic particles when it is shaken; shaking produces unstable particle-stabilised foam bubbles whose coalescence with the air/water interface drives film growth up the inner walls of the container.

High-performance electronic image stabilisation for shift and rotation correction

NASA Astrophysics Data System (ADS)

Parker, Steve C. J.; Hickman, D. L.; Wu, F.

2014-06-01

A novel low size, weight and power (SWaP) video stabiliser called HALO™ is presented that uses a SoC to combine the high processing bandwidth of an FPGA, with the signal processing flexibility of a CPU. An image based architecture is presented that can adapt the tiling of frames to cope with changing scene dynamics. A real-time implementation is then discussed that can generate several hundred optical flow vectors per video frame, to accurately calculate the unwanted rigid body translation and rotation of camera shake. The performance of the HALO™ stabiliser is comprehensively benchmarked against the respected Deshaker 3.0 off-line stabiliser plugin to VirtualDub. Eight different videos are used for benchmarking, simulating: battlefield, surveillance, security and low-level flight applications in both visible and IR wavebands. The results show that HALO™ rivals the performance of Deshaker within its operating envelope. Furthermore, HALO™ may be easily reconfigured to adapt to changing operating conditions or requirements; and can be used to host other video processing functionality like image distortion correction, fusion and contrast enhancement.

Feedback-controlled NTM stabilization on ASDEX Upgrade

NASA Astrophysics Data System (ADS)

Stober, J.; Barrera, L.; Behler, K.; Bock, A.; Buhler, A.; Eixenberger, H.; Giannone, L.; Kasparek, W.; Maraschek, M.; Mlynek, A.; Monaco, F.; Poli, E.; Rapson, C. J.; Reich, M.; Schubert, M.; Treutterer, W.; Wagner, D.; Zohm, H.

2015-03-01

On ASDEX Upgrade a concept for real-time stabilization of NTMs has been realized and successfully applied to (3,2)- and (2,1)-NTMs. Since most of the work has meanwhile been published elsewhere, a short summary with the appropriate references is given. Limitations, deficits and future extensions of the system are discussed. In a second part the recent work on using modulated ECCD for NTM stabilisation is described in some detail. In these experiments ECCD power is modulated according to a magnetic footprint of the rotating NTM. In agreement with earlier results it could be shown that O-point heating reduces the necessary average power for stabilisation whereas X-point heating hampers stabilisation. Although this modulated scheme is not relevant for routine NTM stabilisation on ASDEX Upgrade it may be mandatory for ITER or DEMO. On ASDEX Upgrade it has been re-developed to demonstrate the usage of a FAst DIrectional Switch to continously heat the O-point of the rotating island with only one gyrotron switching between two launchers which target the mode at locations separated in phase by 180 degrees as described in [1].

Fabrication, characterisation and stability of oil-in-water emulsions stabilised by solid lipid particles: the role of particle characteristics and emulsion microstructure upon Pickering functionality.

PubMed

Zafeiri, I; Smith, P; Norton, I T; Spyropoulos, F

2017-07-19

The quest to identify and use bio-based particles with a Pickering stabilisation potential for food applications has lately been particularly substantial and includes, among other candidates, lipid-based particles. The present study investigates the ability of solid lipid particles to stabilise oil-in-water (o/w) emulsions against coalescence. Results obtained showed that emulsion stability could be achieved when low amounts (0.8 wt/wt%) of a surface active species (e.g. Tween 80 or NaCas) were used in particles' fabrication. Triple staining of the o/w emulsions enabled the visualisation of emulsion droplets' surface via confocal microscopy. This revealed an interfacial location of the lipid particles, hence confirming stabilisation via a Pickering mechanism. Emulsion droplet size was controlled by varying several formulation parameters, such as the type of the lipid and surface active component, the processing route and the polarity of the dispersed phase. Differential scanning calorimetry (DSC) was employed as the analytical tool to quantify the amount of crystalline material available to stabilise the emulsion droplets at different intervals during the experimental timeframe. Dissolution of lipid particles in the oil phase was observed and evolved distinctly between a wax and a triglyceride, and in the presence of a non-ionic surfactant and a protein. Yet, this behaviour did not result in emulsion destabilisation. Moreover, emulsion's thermal stability was found to be determined by the behaviour of lipid particles under temperature effects.

Aquatic treadmill water level influence on pelvic limb kinematics in cranial cruciate ligament-deficient dogs with surgically stabilised stifles.

PubMed

Bertocci, G; Smalley, C; Brown, N; Bialczak, K; Carroll, D

2018-02-01

To compare pelvic limb joint kinematics and temporal gait characteristics during land-based and aquatic-based treadmill walking in dogs that have undergone surgical stabilisation for cranial cruciate ligament deficiency. Client-owned dogs with surgically stabilised stifles following cranial cruciate ligament deficiency performed three walking trials consisting of three consecutive gait cycles on an aquatic treadmill under four water levels. Hip, stifle and hock range of motion; peak extension; and peak flexion were assessed for the affected limb at each water level. Gait cycle time and stance phase percentage were also determined. Ten client-owned dogs of varying breeds were evaluated at a mean of 55·2 days postoperatively. Aquatic treadmill water level influenced pelvic limb kinematics and temporal gait outcomes. Increased stifle joint flexion was observed as treadmill water level increased, peaking when the water level was at the hip. Similarly, hip flexion increased at the hip water level. Stifle range of motion was greatest at stifle and hip water levels. Stance phase percentage was significantly decreased when water level was at the hip. Aquatic treadmill walking has become a common rehabilitation modality following surgical stabilisation of cranial cruciate ligament deficiency. However, evidence-based best practice guidelines to enhance stifle kinematics do not exist. Our findings suggest that rehabilitation utilising a water level at or above the stifle will achieve the best stifle kinematics following surgical stifle stabilisation. © 2017 British Small Animal Veterinary Association.

Coupled Experimental and Theoretical Investigations of Instability, Chaos and Turbulence in an Axisymmetric Jet Flow

DTIC Science & Technology

1990-07-01

performed using two of the available methods, due respectively to Wolf et al. 8, and...FiueS1 270 Paper in progress to be submitted to: Phys. Fluids. ECOLE CENTRALE DES ARTS ET MANUFACTURES RAPPORT DE STAGE DE FIN D’ETUDES EXCITATION D’UN JET...disposition et de la souplesse dont ii a fait preuve. Je tiens dgalement & remercier tout particuliirement Patrick Reisenthel de toute 1’attention et

Comparison of salivary collection and processing methods for quantitative HHV-8 detection.

PubMed

Speicher, D J; Johnson, N W

2014-10-01

Saliva is a proved diagnostic fluid for the qualitative detection of infectious agents, but the accuracy of viral load determinations is unknown. Stabilising fluids impede nucleic acid degradation, compared with collection onto ice and then freezing, and we have shown that the DNA Genotek P-021 prototype kit (P-021) can produce high-quality DNA after 14 months of storage at room temperature. Here we evaluate the quantitative capability of 10 collection/processing methods. Unstimulated whole mouth fluid was spiked with a mixture of HHV-8 cloned constructs, 10-fold serial dilutions were produced, and samples were extracted and then examined with quantitative PCR (qPCR). Calibration curves were compared by linear regression and qPCR dynamics. All methods extracted with commercial spin columns produced linear calibration curves with large dynamic range and gave accurate viral loads. Ethanol precipitation of the P-021 does not produce a linear standard curve, and virus is lost in the cell pellet. DNA extractions from the P-021 using commercial spin columns produced linear standard curves with wide dynamic range and excellent limit of detection. When extracted with spin columns, the P-021 enables accurate viral loads down to 23 copies μl(-1) DNA. The quantitative and long-term storage capability of this system makes it ideal for study of salivary DNA viruses in resource-poor settings. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Antipsychotics, mood stabilisers, and risk of violent crime.

PubMed

Fazel, Seena; Zetterqvist, Johan; Larsson, Henrik; Långström, Niklas; Lichtenstein, Paul

2014-09-27

Antipsychotics and mood stabilisers are prescribed widely to patients with psychiatric disorders worldwide. Despite clear evidence for their efficacy in relapse prevention and symptom relief, their effect on some adverse outcomes, including the perpetration of violent crime, is unclear. We aimed to establish the effect of antipsychotics and mood stabilisers on the rate of violent crime committed by patients with psychiatric disorders in Sweden. We used linked Swedish national registers to study 82,647 patients who were prescribed antipsychotics or mood stabilisers, their psychiatric diagnoses, and subsequent criminal convictions in 2006-09. We did within-individual analyses to compare the rate of violent criminality during the time that patients were prescribed these medications versus the rate for the same patients while they were not receiving the drugs to adjust for all confounders that remained constant within each participant during follow-up. The primary outcome was the occurrence of violent crime, according to Sweden's national crime register. In 2006-09, 40,937 men in Sweden were prescribed antipsychotics or mood stabilisers, of whom 2657 (6·5%) were convicted of a violent crime during the study period. In the same period, 41,710 women were prescribed these drugs, of whom 604 (1·4 %) had convictions for violent crime. Compared with periods when participants were not on medication, violent crime fell by 45% in patients receiving antipsychotics (hazard ratio [HR] 0·55, 95% CI 0·47-0·64) and by 24% in patients prescribed mood stabilisers (0·76, 0·62-0·93). However, we identified potentially important differences by diagnosis-mood stabilisers were associated with a reduced rate of violent crime only in patients with bipolar disorder. The rate of violence reduction for antipsychotics remained between 22% and 29% in sensitivity analyses that used different outcomes (any crime, drug-related crime, less severe crime, and violent arrest), and was stronger in patients who were prescribed higher drug doses than in those prescribed low doses. Notable reductions in violent crime were also recorded for depot medication (HR adjusted for concomitant oral medications 0·60, 95% CI 0·39-0·92). In addition to relapse prevention and psychiatric symptom relief, the benefits of antipsychotics and mood stabilisers might also include reductions in the rates of violent crime. The potential effects of these drugs on violence and crime should be taken into account when treatment options for patients with psychiatric disorders are being considered. The Wellcome Trust, the Swedish Prison and Probation Service, the Swedish Research Council, and the Swedish Research Council for Health, Working Life and Welfare. Copyright © 2014 Fazel et al. Open Access article distributed under the terms of CC BY. Published by Elsevier Ltd. All rights reserved.

Antipsychotics, mood stabilisers, and risk of violent crime

PubMed Central

Fazel, Seena; Zetterqvist, Johan; Larsson, Henrik; Långström, Niklas; Lichtenstein, Paul

2014-01-01

Summary Background Antipsychotics and mood stabilisers are prescribed widely to patients with psychiatric disorders worldwide. Despite clear evidence for their efficacy in relapse prevention and symptom relief, their effect on some adverse outcomes, including the perpetration of violent crime, is unclear. We aimed to establish the effect of antipsychotics and mood stabilisers on the rate of violent crime committed by patients with psychiatric disorders in Sweden. Methods We used linked Swedish national registers to study 82 647 patients who were prescribed antipsychotics or mood stabilisers, their psychiatric diagnoses, and subsequent criminal convictions in 2006–09. We did within-individual analyses to compare the rate of violent criminality during the time that patients were prescribed these medications versus the rate for the same patients while they were not receiving the drugs to adjust for all confounders that remained constant within each participant during follow-up. The primary outcome was the occurrence of violent crime, according to Sweden's national crime register. Findings In 2006–09, 40 937 men in Sweden were prescribed antipsychotics or mood stabilisers, of whom 2657 (6·5%) were convicted of a violent crime during the study period. In the same period, 41 710 women were prescribed these drugs, of whom 604 (1·4 %) had convictions for violent crime. Compared with periods when participants were not on medication, violent crime fell by 45% in patients receiving antipsychotics (hazard ratio [HR] 0·55, 95% CI 0·47–0·64) and by 24% in patients prescribed mood stabilisers (0·76, 0·62–0·93). However, we identified potentially important differences by diagnosis—mood stabilisers were associated with a reduced rate of violent crime only in patients with bipolar disorder. The rate of violence reduction for antipsychotics remained between 22% and 29% in sensitivity analyses that used different outcomes (any crime, drug-related crime, less severe crime, and violent arrest), and was stronger in patients who were prescribed higher drug doses than in those prescribed low doses. Notable reductions in violent crime were also recorded for depot medication (HR adjusted for concomitant oral medications 0·60, 95% CI 0·39–0·92). Interpretation In addition to relapse prevention and psychiatric symptom relief, the benefits of antipsychotics and mood stabilisers might also include reductions in the rates of violent crime. The potential effects of these drugs on violence and crime should be taken into account when treatment options for patients with psychiatric disorders are being considered. Funding The Wellcome Trust, the Swedish Prison and Probation Service, the Swedish Research Council, and the Swedish Research Council for Health, Working Life and Welfare. PMID:24816046

Global output feedback stabilisation of stochastic high-order feedforward nonlinear systems with time-delay

NASA Astrophysics Data System (ADS)

Zhang, Kemei; Zhao, Cong-Ran; Xie, Xue-Jun

2015-12-01

This paper considers the problem of output feedback stabilisation for stochastic high-order feedforward nonlinear systems with time-varying delay. By using the homogeneous domination theory and solving several troublesome obstacles in the design and analysis, an output feedback controller is constructed to drive the closed-loop system globally asymptotically stable in probability.

Intensity stabilisation of optical pulse sequences for coherent control of laser-driven qubits

NASA Astrophysics Data System (ADS)

Thom, Joseph; Yuen, Ben; Wilpers, Guido; Riis, Erling; Sinclair, Alastair G.

2018-05-01

We demonstrate a system for intensity stabilisation of optical pulse sequences used in laser-driven quantum control of trapped ions. Intensity instability is minimised by active stabilisation of the power (over a dynamic range of > 104) and position of the focused beam at the ion. The fractional Allan deviations in power were found to be <2.2 × 10^{-4} for averaging times from 1 to 16,384 s. Over similar times, the absolute Allan deviation of the beam position is <0.1 μm for a 45 {μ }m beam diameter. Using these residual power and position instabilities, we estimate the associated contributions to infidelity in example qubit logic gates to be below 10^{-6} per gate.

Identification of a Lead Candidate in the Search for Carbene-Stabilised Homoaromatics.

PubMed

Mattock, James D; Vargas, Alfredo; Dewhurst, Rian D

2015-11-16

The effect of carbenes as Lewis donor groups on the homoaromaticity of mono- and bicyclic organic molecules is surveyed. The search for viable carbene-stabilised homoaromatics resulted in a large amount of rejected candidates as well as nine promising candidates that are further analysed for their homoaromaticity by using a number of metrics. Of these, five appeared to show modest homoaromaticity, whereas another compound showed a level of homoaromaticity comparable with the homotropylium cation benchmark compound. Isoelectronic analogues and constitutional isomers of the lead compound were investigated, however, none of these showed comparable homoaromaticity. The implications of these calculations on the design of donor-stabilised homoaromatics are discussed. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Femtosecond fibre laser stabilisation to an optical frequency standard using a KTP electro-optic crystal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nyushkov, B N; Pivtsov, V S; Koliada, N A

2015-05-31

A miniature intracavity KTP-based electro-optic phase modulator has been developed which can be used for effective stabilisation of an optical frequency comb of a femtosecond erbiumdoped fibre laser to an optical frequency standard. The use of such an electro-optic modulator (EOM) has made it possible to extend the working frequency band of a phase-locked loop system for laser stabilisation to several hundred kilohertz. We demonstrate that the KTP-based EOM is sufficiently sensitive even at a small optical length, which allows it to be readily integrated into cavities of femtosecond fibre lasers with high mode frequency spacings (over 100 MHz). (extrememore » light fields and their applications)« less

[Haemothorax and chylothorax: surgical approach].

PubMed

Monaco, M; Mulé, V; Barresi, P; Barone, M; Surleti, S; Benedetto, F; Micali, V; Mondello, B; Monaco, F; Pavia, R

2004-01-01

Diseases causing blood accumulation in the pleural space (or haemothorax) are usually very demanding for diagnosis and require a multidisciplinar therapeutical approach in emergency. So, their treatment should always be immediate and should aim to restore the optimal patient's haemodynamic conditions and to find the site of bleeding. Chylothorax, a lymphatic effusion in the pleural space, is also a very important pathology, as it effects the nutritional and immunological state of the patient causing pleural involvement and respiratory insufficiency. Stabilisation of vital parameters with adequate systemic therapies (blood perfusions, fluids and pro-coagulation factors, TPN) preceeds surgery, which can be the placement of a thoracic drain or emergency thorascopy and/or thoracotomy. The Authors report the casistic of the latest three years for diagnosis and treatment of haemothorax and chylothorax stressing the advantages of a minimal invasive approach for evacuation and identification of the origin of bleeding and haemorrhage and/or lymphatic effusion control.

3D Neutronic Analysis in MHD Calculations at ARIES-ST Fusion Reactors Systems

NASA Astrophysics Data System (ADS)

Hançerliogulları, Aybaba; Cini, Mesut

2013-10-01

In this study, we developed new models for liquid wall (FW) state at ARIES-ST fusion reactor systems. ARIES-ST is a 1,000 MWe fusion reactor system based on a low aspect ratio ST plasma. In this article, we analyzed the characteristic properties of magnetohydrodynamics (MHD) and heat transfer conditions by using Monte-Carlo simulation methods (ARIES Team et al. in Fusion Eng Des 49-50:689-695, 2000; Tillack et al. in Fusion Eng Des 65:215-261, 2003) . In fusion applications, liquid metals are traditionally considered to be the best working fluids. The working liquid must be a lithium-containing medium in order to provide adequate tritium that the plasma is self-sustained and that the fusion is a renewable energy source. As for Flibe free surface flows, the MHD effects caused by interaction with the mean flow is negligible, while a fairly uniform flow of thick can be maintained throughout the reactor based on 3-D MHD calculations. In this study, neutronic parameters, that is to say, energy multiplication factor radiation, heat flux and fissile fuel breeding were researched for fusion reactor with various thorium and uranium molten salts. Sufficient tritium amount is needed for the reactor to work itself. In the tritium breeding ratio (TBR) >1.05 ARIES-ST fusion model TBR is >1.1 so that tritium self-sufficiency is maintained for DT fusion systems (Starke et al. in Fusion Energ Des 84:1794-1798, 2009; Najmabadi et al. in Fusion Energ Des 80:3-23, 2006).

Technical Evaluation Report on the Fluid Dynamics Panel Specialists’ Meeting on Effects of Adverse Weather on Aerodynamics (Les Effets des Conditions Meteorologiques Adverses sur l’Aerodynamique)

DTIC Science & Technology

1991-11-01

AD-A245 117 III~i~IIiiIiIIi~ifhII _________________________AGARD-R306 0 AGARD ADVISORY GROUP FOR AEROSPACE RESEARCH & DEVELOPMENT 4 7 RUE ANCELLE...REPRODUCE LEGIBLY. AGARD-AR-306 ADVISORY GROUP FOR AEROSPACE RESEARCH & DEVELOPMENT 7 RUE ANCELLE 92200 NEUILLY SUR SEINE FRANCE AGARD ADVISORY RIEPORT...Conditions NMeleorolovioiue,, Adverscs sur rAerodynarminiuc) - J.J. Reinrnann National ,\\cronautico and Space .\\drmintration L eip Research (Center

Aerothermodynamics and Propulsion Integration for Hypersonic Vehicles (L’Integration de la Propusion et de l’aerodynnamique pour les vehicules hypersoniques).

DTIC Science & Technology

1996-10-01

aerothermoelasticity, temperature gradients and internal heat gies, belong fully resuable SSTO and TSTO sytems, protection. The demand of extreme light...supersonic conditions, convergent and convergent-divergent nozzles matching the cold cage internal diameter will be fixed on the end plate. A set of five...in hypersonic flow. AIAA Paper93- des Fluides, Avril 1996. 5111, 5th International Aerospace Planes and 16. Morrisette, E.L., Creel, T.R., Chen, F.J

Survey of Laser-Produced Pressure and Impulse Data

DTIC Science & Technology

1988-01-01

Marseille, Marseille, France; C.E.A. Limeil-Service H.D.E., St. Georges , France Experimental Conditions: Laser: TEA C02 Wavelength: 10.6 pm Pulse energy: to...Mecanique des Fluides de Marseille, Marseille, France; C.E.A. Limeil-Service H.D.E., St. Georges , France Experimental Conditions: Laser: TEA CO2 Wavelength...34 Authors : C.L. Bohn, M.D. Stephen, F. Eng, J.C. Souders, G.A. Brost , T.F. Deaton, B.W. Duvall, and J.T. Tinsley Citation: "Mechanical coupling of an

Computational Aerodynamics Based on the Euler Equations (L’aerodynamique Numerique a Partir des Equations d’Euler)

DTIC Science & Technology

1994-01-01

0 The Mission of AGARD 0 According to its Charter, the mission of AGARD is to bring together the leading personalities of the NATO nations in the...advances in the aerospace sciences relevant to strengthening the common defence posture; • - Improving the co-operation among member nations in aerospace...for the physical principles. To construct the relevant equations for fluid gas consisting of pseudo particles, 10 is the internal energy due motion it

Intramedullary reduction and stabilisation of adult radial neck fractures.

PubMed

Keller, H W; Rehm, K E; Helling, J

1994-05-01

We report the treatment of six adult patients with displaced fractures of the radial neck by intramedullary reduction and stabilisation. Nine months after operation all the patients had good joint function, little or no pain, complete healing and no significant periarticular calcification. This simple semi-closed procedure may help to avoid resection of the radial head in some cases.

Stabilising Fragile States

DTIC Science & Technology

2011-01-01

services (and private - sector jobs) throughout the target region. As such, jobs have the potential to redress perceptions of grievances and a lack of...sustainable employment requires a vibrant private sector . Accordingly, short- term employment initiatives should be undertaken in a way that will not...inadvertently undermine prospects for the emergence of a healthy private sector .   Key to maximising the stabilisation benefits of a jobs programme

Physicochemical characterisation of β-carotene emulsion stabilised by covalent complexes of α-lactalbumin with (-)-epigallocatechin gallate or chlorogenic acid.

PubMed

Wang, Xiaoya; Liu, Fuguo; Liu, Lei; Wei, Zihao; Yuan, Fang; Gao, Yanxiang

2015-04-15

In this study the impact of covalent complexes of α-lactalbumin (α-La) with (-)-epigallocatechin gallate (EGCG) or chlorogenic acid (CA) was investigated on the physicochemical properties of β-carotene oil-in-water emulsions. EGCG, or CA, was covalently linked to α-La at pH 8.0, as evidenced by increased total phenolic content and declined fluorescence intensity. Compared with those stabilised by α-La alone and α-La-CA or EGCG mixture, the emulsion stabilised by the α-La-EGCG covalent complex exhibited the least changes in particle size and transmission profiles, using a novel centrifugal sedimentation technique, indicating an improvement in the physical stability. The least degradation of β-carotene occurred in the emulsion stabilised with the α-La-EGCG covalent complex when stored at 25 °C. These results implied that protein-polyphenol covalent complexes were able to enhance the physical stability of β-carotene emulsion and inhibit the degradation of β-carotene in oil-in-water emulsion, and the effect was influenced by the types of the phenolic compounds. Copyright © 2014 Elsevier Ltd. All rights reserved.

The distribution and stabilisation of dissolved Fe in deep-sea hydrothermal plumes

NASA Astrophysics Data System (ADS)

Bennett, Sarah A.; Achterberg, Eric P.; Connelly, Douglas P.; Statham, Peter J.; Fones, Gary R.; German, Christopher R.

2008-06-01

We have conducted a study of hydrothermal plumes overlying the Mid-Atlantic Ridge near 5° S to investigate whether there is a significant export flux of dissolved Fe from hydrothermal venting to the oceans. Our study combined measurements of plume-height Fe concentrations from a series of 6 CTD stations together with studies of dissolved Fe speciation in a subset of those samples. At 2.5 km down plume from the nearest known vent site dissolved Fe concentrations were ˜ 20 nM. This is much higher than would be predicted from a combination of plume dilution and dissolved Fe(II) oxidation rates, but consistent with stabilisation due to the presence of organic Fe complexes and Fe colloids. Using Competitive Ligand Exchange-Cathodic Stripping Voltammetry (CLE-CSV), stabilised dissolved Fe complexes were detected within the dissolved Fe fraction on the edges of one non-buoyant hydrothermal plume with observed ligand concentrations high enough to account for stabilisation of ˜ 4% of the total Fe emitted from the 5° S vent sites. If these results were representative of all hydrothermal systems, submarine venting could provide 12-22% of the global deep-ocean dissolved Fe budget.

Trehalose and sorbitol alter the kinetic pattern of inactivation of glutamate dehydrogenase during drying in levitated microdroplets.

PubMed

Lorenzen, Elke; Lee, Geoffrey

2013-12-01

A single-droplet acoustic levitator was used to determine the drying rate and the kinetics of inactivation of glutamate dehydrogenase in the presence of added trehalose or sorbitol. The solution was also spray dried under the same process condition of drying gas temperature on a bench-top machine. Both trehalose and sorbitol delay the point of onset of enzyme inactivation which lies after the critical point of drying. Both carbohydrates also reduce the apparent rate constant of inactivation calculated during the subsequent inactivation phase. The carbohydrates stabilise, therefore, the enzyme during droplet drying and particle formation mainly during the falling rate drying period. There is no difference between the stabilising effects of the two carbohydrates when examined as levitated single droplets. This suggests the importance of water replacement as a stabilising mechanism in the levitated droplets/particles. On spray drying, the trehalose stabilises the enzyme better than does the sorbitol at a drying gas (outlet) temperature of 60°C. This suggests glass formation with the trehalose but not the sorbitol during the very rapid drying process of small-atomised droplets in the spray dryer. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Evaluation of a lime-mediated sewage sludge stabilisation process. Product characterisation and technological validation for its use in the cement industry.

PubMed

Rodríguez, N Husillos; Granados, R J; Blanco-Varela, M T; Cortina, J L; Martínez-Ramírez, S; Marsal, M; Guillem, M; Puig, J; Fos, C; Larrotcha, E; Flores, J

2012-03-01

This paper describes an industrial process for stabilising sewage sludge (SS) with lime and evaluates the viability of the stabilised product, denominated Neutral, as a raw material for the cement industry. Lime not only stabilised the sludge, raised the temperature of the mix to 80-100°C, furthering water evaporation, portlandite formation and the partial oxidation of the organic matter present in the sludge. Process mass and energy balances were determined. Neutral, a white powder consisting of portlandite (49.8%), calcite (16.6%), inorganic oxides (13.4%) and organic matter and moisture (20.2%), proved to be technologically apt for inclusion as a component in cement raw mixes. In this study, it was used instead of limestone in raw mixes clinkerised at 1400, 1450 and 1500°C. These raw meals exhibited greater reactivity at high temperatures than the limestone product and their calcination at 1500°C yielded clinker containing over 75% calcium silicates, the key phases in Portland clinker. Finally, the two types of raw meal (Neutral and limestone) were observed to exhibit similar mineralogy and crystal size and distribution. Published by Elsevier Ltd.

Molecular diffusion in disordered interfacial media as probed by pulsed field gradients and nuclear magnetic relaxation dispersion

NASA Astrophysics Data System (ADS)

Levitz, P.; Korb, J.-P.; Bryant, R. G.

1999-10-01

We address the question of probing the fluid dynamics in disordered interfacial media by Pulsed field gradient (PFG) and Magnetic relaxation dispersion (MRD) techniques. We show that the PFG method is useful to separate the effects of morphology from the connectivity in disordered macroporous media. We propose simulations of molecular dynamics and spectral density functions, J(ω), in a reconstructed mesoporous medium for different limiting conditions at the pore surface. An algebraic form is found for J(ω) in presence of a surface diffusion and a local exploration of the pore network. A logarithmic form of J(ω) is found in presence of a pure surface diffusion. We present magnetic relaxation dispersion experiments (MRD) for water and acetone in calibrated mesoporous media to support the main results of our simulations and theories. Nous présentons les avantages respectifs des méthodes de gradients de champs pulsés (PFG) et de relaxation magnétique nucléaire en champs cyclés (MRD) pour sonder la dynamique moléculaire dans les milieux interfaciaux désordonnés. La méthode PFG est utile pour séparer la morphologie et la connectivité dans des milieux macroporeux. Des simulations de diffusion moléculaire et de densité spectrale J(ω) en milieux mésoporeux sont présentées dans différentes conditions limites aux interfaces des pores. Nous trouvons une forme de dispersion algébrique de J(ω) pour une diffusion de surface assistée d'une exploration locale du réseau de pores et une forme logarithmique dans le cas d'une simple diffusion de surface. Les résultats expérimentaux de la méthode MRD pour de l'eau et de l'acétone dans des milieux mésoporeux calibrés supportent les résultats principaux de nos simulations et théories.

Use of Reinforced Lightweight Clay Aggregates for Landslide Stabilisation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herle, Vitezslav

2008-07-08

In spring 2006 a large landslide combined with rock fall closed a highway tunnel near Svitavy in NE part of Czech Republic and cut the main highway connecting Bohemia with Moravia regions. Stabilisation work was complicated by steep mountainous terrain and large inflow of surface and underground water. The solution was based on formation of a stabilisation fill made of reinforced free draining aggregates at the toe of the slope with overlying lightweight fill up to 10 m high reinforced with PET geogrid and steel mesh protecting soft easily degrading sandstone against weathering. Extensive monitoring made possible to compare themore » FEM analysis with real values. The finished work fits very well in the environment and was awarded a special prize in the 2007 transport structures contest.« less

Input and output constraints-based stabilisation of switched nonlinear systems with unstable subsystems and its application

NASA Astrophysics Data System (ADS)

Chen, Chao; Liu, Qian; Zhao, Jun

2018-01-01

This paper studies the problem of stabilisation of switched nonlinear systems with output and input constraints. We propose a recursive approach to solve this issue. None of the subsystems are assumed to be stablisable while the switched system is stabilised by dual design of controllers for subsystems and a switching law. When only dealing with bounded input, we provide nested switching controllers using an extended backstepping procedure. If both input and output constraints are taken into consideration, a Barrier Lyapunov Function is employed during operation to construct multiple Lyapunov functions for switched nonlinear system in the backstepping procedure. As a practical example, the control design of an equilibrium manifold expansion model of aero-engine is given to demonstrate the effectiveness of the proposed design method.

Cerium reduction at the interface between ceria and yttria-stabilised zirconia and implications for interfacial oxygen non-stoichiometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Kepeng; Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Wenhua Road 72, 110016 Shenyang; Schmid, Herbert

2014-03-01

Epitaxial CeO{sub 2} films with different thickness were grown on Y{sub 2}O{sub 3} stabilised Zirconia substrates. Reduction of cerium ions at the interface between CeO{sub 2} films and yttria stabilised zirconia substrates is demonstrated using aberration-corrected scanning transmission electron microscopy combined with electron energy-loss spectroscopy. It is revealed that most of the Ce ions were reduced from Ce{sup 4+} to Ce{sup 3+} at the interface region with a decay of several nanometers. Several possibilities of charge compensations are discussed. Irrespective of the details, such local non-stoichiometries are crucial not only for understanding charge transport in such hetero-structures but also formore » understanding ceria catalytic properties.« less

Is coracoclavicular stabilisation alone sufficient for the endoscopic treatment of severe acromioclavicular joint dislocation (Rockwood types III, IV, and V)?

PubMed

Barth, J; Duparc, F; Andrieu, K; Duport, M; Toussaint, B; Bertiaux, S; Clavert, P; Gastaud, O; Brassart, N; Beaudouin, E; De Mourgues, P; Berne, D; Bahurel, J; Najihi, N; Boyer, P; Faivre, B; Meyer, A; Nourissat, G; Poulain, S; Bruchou, F; Ménard, J F

2015-12-01

The primary objective was to evaluate correlations linking anatomical to functional outcomes after endoscopically assisted repair of acute acromioclavicular joint dislocation (ACJD). Combined acromioclavicular and coracoclavicular stabilisation improves radiological outcomes compared to coracoclavicular stabilisation alone. A prospective multicentre study was performed. Clinical outcome measures were pain intensity on a visual analogue scale (VAS), subjective functional impairment (QuickDASH score), and Constant's score. Anatomical outcomes were assessed on standard radiographs (anteroposterior view of the acromioclavicular girdle and bilateral axillary views) obtained preoperatively and postoperatively and on postoperative dynamic radiographs taken as described by Tauber et al. Of 116 patients with acute ACJD included in the study, 48% had type III, 30% type IV, and 22% type V ACJD according to the Rockwood classification. Coracoclavicular stabilisation was achieved using a double endobutton in 93% of patients, and concomitant acromioclavicular stabilisation was performed in 50% of patients. The objective functional outcome was good, with an unweighted Constant's score ≥ 85/100 and a subjective QuickDASH functional disability score ≤ 10 in 75% of patients. The radiographic analysis showed significant improvements from the preoperative to the 1-year postoperative values in the vertical plane (decrease in the coracoclavicular ratio from 214 to 128%, p=10(-6)) and in the horizontal plane (decrease in posterior displacement from 4 to 0mm, p=5×10(-5)). The anatomical outcome correlated significantly with the functional outcome (absolute R value=0.19 and p=0.045). We found no statistically significant differences across the various types of constructs used. Intra-operative control of the acromioclavicular joint did not improve the result. Implantation of a biological graft significantly improved both the anatomical outcome in the vertical plane (p=0.04) and acromioclavicular stabilisation in the horizontal plane (p=0.02). The coracoclavicular ratio on the anteroposterior radiograph was adversely affected by a longer time from injury to surgery (p=0.02) and by a higher body mass index (BMI) (p=0.006). High BMI also had a negative effect on the difference in the distance separating the anterior edge of the acromion from the anterior edge of the clavicle between the injured and uninjured sides, as assessed on the axillary views (p=0.009). This study demonstrates that acute ACJD requires stabilisation in both planes, i.e., at the coracoclavicular junction and at the acromioclavicular joint. Coracoclavicular stabilisation alone is not sufficient, regardless of the type of implant used. Implantation of a biological graft should be considered when the time from injury to surgery is longer than 10days. The weight of the upper limb should be taken into account, with 6weeks of immobilisation to unload the construct in patients who have high BMI values. II, prospective non-randomised comparative study. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Biomineralisation by earthworms - an investigation into the stability and distribution of amorphous calcium carbonate.

PubMed

Hodson, Mark E; Benning, Liane G; Demarchi, Bea; Penkman, Kirsty E H; Rodriguez-Blanco, Juan D; Schofield, Paul F; Versteegh, Emma A A

Many biominerals form from amorphous calcium carbonate (ACC), but this phase is highly unstable when synthesised in its pure form inorganically. Several species of earthworm secrete calcium carbonate granules which contain highly stable ACC. We analysed the milky fluid from which granules form and solid granules for amino acid (by liquid chromatography) and functional group (by Fourier transform infrared (FTIR) spectroscopy) compositions. Granule elemental composition was determined using inductively coupled plasma-optical emission spectroscopy (ICP-OES) and electron microprobe analysis (EMPA). Mass of ACC present in solid granules was quantified using FTIR and compared to granule elemental and amino acid compositions. Bulk analysis of granules was of powdered bulk material. Spatially resolved analysis was of thin sections of granules using synchrotron-based μ-FTIR and EMPA electron microprobe analysis. The milky fluid from which granules form is amino acid-rich (≤ 136 ± 3 nmol mg -1 (n = 3; ± std dev) per individual amino acid); the CaCO 3 phase present is ACC. Even four years after production, granules contain ACC. No correlation exists between mass of ACC present and granule elemental composition. Granule amino acid concentrations correlate well with ACC content (r ≥ 0.7, p ≤ 0.05) consistent with a role for amino acids (or the proteins they make up) in ACC stabilisation. Intra-granule variation in ACC (RSD = 16%) and amino acid concentration (RSD = 22-35%) was high for granules produced by the same earthworm. Maps of ACC distribution produced using synchrotron-based μ-FTIR mapping of granule thin sections and the relative intensity of the ν 2 : ν 4 peak ratio, cluster analysis and component regression using ACC and calcite standards showed similar spatial distributions of likely ACC-rich and calcite-rich areas. We could not identify organic peaks in the μ-FTIR spectra and thus could not determine whether ACC-rich domains also had relatively high amino acid concentrations. No correlation exists between ACC distribution and elemental concentrations determined by EMPA. ACC present in earthworm CaCO 3 granules is highly stable. Our results suggest a role for amino acids (or proteins) in this stability. We see no evidence for stabilisation of ACC by incorporation of inorganic components. Graphical abstractSynchrotron-based μ-FTIR mapping was used to determine the spatial distribution of amorphous calcium carbonate in earthworm-produced CaCO 3 granules.

High-performance liquid chromatographic analysis of as-synthesised N,N'-dimethylformamide-stabilised gold nanoclusters product

NASA Astrophysics Data System (ADS)

Xie, Shunping; Paau, Man Chin; Zhang, Yan; Shuang, Shaomin; Chan, Wan; Choi, Martin M. F.

2012-08-01

Reverse-phase high-performance liquid chromatographic (RP-HPLC) separation and analysis of polydisperse water-soluble gold nanoclusters (AuNCs) stabilised with N,N'-dimethylformamide (DMF) were investigated. Under optimal elution gradient conditions, the separation of DMF-AuNCs was monitored by absorption and fluorescence spectroscopy. The UV-vis spectral characteristics of the separated DMF-AuNCs have been captured and they do not possess distinct surface plasmon resonance bands, indicating that all DMF-AuNCs are small AuNCs. The photoluminescence emission spectra of the separated DMF-AuNCs are in the blue-light region. Moreover, cationic DMF-AuNCs are for the first time identified by ion chromatography. Our proposed RP-HPLC methodology has been successfully applied to separate AuNCs of various Au atoms as well as DMF-stabilised ligands. Finally, the composition of the separated DMF-AuNCs was confirmed by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry and electrospray ionisation mass spectrometry, proving that the as-synthesised DMF-AuNCs product consists of Au10+, Au10, Au11, Au12, Au13, and Au14 NCs stabilised with various numbers of DMF ligands.Reverse-phase high-performance liquid chromatographic (RP-HPLC) separation and analysis of polydisperse water-soluble gold nanoclusters (AuNCs) stabilised with N,N'-dimethylformamide (DMF) were investigated. Under optimal elution gradient conditions, the separation of DMF-AuNCs was monitored by absorption and fluorescence spectroscopy. The UV-vis spectral characteristics of the separated DMF-AuNCs have been captured and they do not possess distinct surface plasmon resonance bands, indicating that all DMF-AuNCs are small AuNCs. The photoluminescence emission spectra of the separated DMF-AuNCs are in the blue-light region. Moreover, cationic DMF-AuNCs are for the first time identified by ion chromatography. Our proposed RP-HPLC methodology has been successfully applied to separate AuNCs of various Au atoms as well as DMF-stabilised ligands. Finally, the composition of the separated DMF-AuNCs was confirmed by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry and electrospray ionisation mass spectrometry, proving that the as-synthesised DMF-AuNCs product consists of Au10+, Au10, Au11, Au12, Au13, and Au14 NCs stabilised with various numbers of DMF ligands. This article was submitted as part of a Themed Issue on metallic clusters. Other papers on this topic can be found in issue 14 of vol. 4 (2012). This issue can be found from the Nanoscale homepage [http://www.rsc.org/nanoscale].

New on-line method for water isotope analysis of speleothem fluid inclusions using laser absorption spectroscopy (WS-CRDS)

NASA Astrophysics Data System (ADS)

Affolter, S.; Fleitmann, D.; Leuenberger, M.

2014-01-01

A new online method to analyse water isotopes of speleothem fluid inclusions using a wavelength scanned cavity ring down spectroscopy (WS-CRDS) instrument is presented. This novel technique allows us to simultaneously measure hydrogen and oxygen isotopes for a released aliquot of water. To do so, we designed a new simple line that allows the on-line water extraction and isotope analysis of speleothem samples. The specificity of the method lies in the fact that fluid inclusions release is made on a standard water background, which mainly improves the δD reliability. To saturate the line, a peristaltic pump continuously injects standard water into the line that is permanently heated to 140 °C and flushed with dry nitrogen gas. This permits instantaneous and complete vaporisation of the standard water resulting in an artificial water background with well-known δD and δ18O values. The speleothem sample is placed into a copper tube, attached to the line and after system stabilisation is crushed using a simple hydraulic device to liberate speleothem fluid inclusions water. The released water is carried by the nitrogen/standard water gas stream directly to a Picarro L1102-i for isotope determination. To test the accuracy and reproducibility of the line and to measure standard water during speleothem measurements a syringe injection unit was added to the line. Peak evaluation is done similarly as in gas chromatography to obtain δD and δ18O isotopic composition of measured water aliquots. Precision is better than 1.5‰ for δD and 0.4‰ for δ18O for water measurement for an extended range (-210 to 0‰ for δD and -27 to 0‰ for δ18O) primarily dependent on the amount of water released from speleothem fluid inclusions and secondarily on the isotopic composition of the sample. The results show that WS-CRDS technology is suitable for speleothem fluid inclusion measurements and gives results that are comparable to Isotope Ratio Mass Spectrometry (IRMS) technique.

New online method for water isotope analysis of speleothem fluid inclusions using laser absorption spectroscopy (WS-CRDS)

NASA Astrophysics Data System (ADS)

Affolter, S.; Fleitmann, D.; Leuenberger, M.

2014-07-01

A new online method to analyse water isotopes of speleothem fluid inclusions using a wavelength scanned cavity ring down spectroscopy (WS-CRDS) instrument is presented. This novel technique allows us simultaneously to measure hydrogen and oxygen isotopes for a released aliquot of water. To do so, we designed a new simple line that allows the online water extraction and isotope analysis of speleothem samples. The specificity of the method lies in the fact that fluid inclusions release is made on a standard water background, which mainly improves the δ D robustness. To saturate the line, a peristaltic pump continuously injects standard water into the line that is permanently heated to 140 °C and flushed with dry nitrogen gas. This permits instantaneous and complete vaporisation of the standard water, resulting in an artificial water background with well-known δ D and δ18O values. The speleothem sample is placed in a copper tube, attached to the line, and after system stabilisation it is crushed using a simple hydraulic device to liberate speleothem fluid inclusions water. The released water is carried by the nitrogen/standard water gas stream directly to a Picarro L1102-i for isotope determination. To test the accuracy and reproducibility of the line and to measure standard water during speleothem measurements, a syringe injection unit was added to the line. Peak evaluation is done similarly as in gas chromatography to obtain &delta D; and δ18O isotopic compositions of measured water aliquots. Precision is better than 1.5 ‰ for δ D and 0.4 ‰ for δ18O for water measurements for an extended range (-210 to 0 ‰ for δ D and -27 to 0 ‰ for δ18O) primarily dependent on the amount of water released from speleothem fluid inclusions and secondarily on the isotopic composition of the sample. The results show that WS-CRDS technology is suitable for speleothem fluid inclusion measurements and gives results that are comparable to the isotope ratio mass spectrometry (IRMS) technique.

Preparation and clinical evaluation of succinylated collagen punctal plugs in dry eye syndrome: a pilot study.

PubMed

Hadassah, J; Bhuvaneshwari, Namita; Singh, Deepti; Sehgal, P K

2010-01-01

This is a pilot study of 10 eyes of 6 patients. This paper describes the preparation and clinical evaluation of succinylated collagen punctal plugs (SCPP) in the treatment of dry eye syndrome (DES). SCPP were prepared from succinylated collagen with the exact dimensions of the punctum (length 1.5-2.5 mm, diameter 0.2-0.5 mm, water content between 50 and 55%). All the patients were clinically evaluated for best corrected visual acuity (BCVA), tear fluid levels (TFL), protein content, tear fluid osmolarity (TFO), fluorescence staining of the cornea and tear break-up time (TBUT) before and after punctal occlusion with SCPP. TFL improved among all the patients after punctal occlusion with SCPP. BCVA showed improvement in case 4 (right eye/left eye), case 5 (left eye) and case 6 (right eye), who had developed dry eyes due to environmental conditions. Protein content increased on day 7 in all the patients and gradually decreased. TFO decreased on days 3 and 5 in all patients after punctal occlusion with SCPP, and showed the same levels on day 14. TFL, PC, TFO and TBUT showed significant improvement in all the patients after punctal occlusion with SCPP. All patients experienced symptomatic relief after punctal occlusion with SCPP. There was no discomfort, foreign body sensation, plug extrusion, corneal aberration, infection, or formation of pyogenic granuloma with SCPP. SCPP stands as a promising alternative to other punctal plugs in the treatment of DES. Copyright 2010 S. Karger AG, Basel.

The effect of intermittent use of occlusal splint devices on sleep bruxism: a 4-week observation with a portable electromyographic recording device.

PubMed

Matsumoto, H; Tsukiyama, Y; Kuwatsuru, R; Koyano, K

2015-04-01

This randomised controlled study investigated the effect of intermittent use of occlusal splints on sleep bruxism compared with that of continuous use by measuring masseter muscle electromyographic activity using a portable electromyographic recording system. Twenty bruxers were randomly allocated to the continuous group and intermittent group. Subjects in the continuous group wore stabilisation splints during sleep for 29 nights continuously, whereas those in the intermittent group wore splints during sleep every other week, that is they used splints on the 1st-7th, 15th-21st and 29th nights. Electromyographic activity of the masseter muscle during sleep was recorded for the following six time points: before (baseline), immediately after, and 1, 2, 3 and 4 weeks after the insertion of a stabilisation splint. The number of nocturnal masseter electromyographic events, duration and the total activity of sleep bruxism were analysed. In the continuous group, nocturnal masseter electromyographic events were significantly reduced immediately and 1 week after the insertion of the stabilisation splint, and duration was reduced immediately after the insertion (P < 0·05, Dunnett's test), but no reduction was observed at 2, 3 and 4 weeks after insertion. In the intermittent group, nocturnal masseter electromyographic events and duration were significantly reduced immediately after and also 4 weeks after insertion of the stabilisation splint (P < 0·05, Dunnett's test). The obtained results of the present exploratory trial indicate that the intermittent use of stabilisation splints may reduce sleep bruxism activity for a longer period compared with that of continuous use. © 2014 John Wiley & Sons Ltd.

Post-irradiation somatic mutation and clonal stabilisation time in the human colon.

PubMed Central

Campbell, F; Williams, G T; Appleton, M A; Dixon, M F; Harris, M; Williams, E D

1996-01-01

BACKGROUND: Colorectal crypts are clonal units in which somatic mutation of marker genes in stem cells leads to crypt restricted phenotypic conversion initially involving part of the crypt, later the whole crypt. Studies in mice show that the time taken for the great majority of mutated crypts to be completely converted, the clonal stabilisation time, is four weeks in the colon and 21 weeks in the ileum. Differences in the clonal stabilisation time between tissues and species are thought to reflect differences in stem cell organisation and crypt kinetics. AIM: To study the clonal stabilisation time in the human colorectum. METHODS: Stem cell mutation can lead to crypt restricted loss of O-acetylation of sialomucins in subjects heterozygous for O-acetyltransferase gene activity. mPAS histochemistry was used to visualise and quantify crypts partially or wholly involved by the mutant phenotype in 21 informative cases who had undergone colectomy up to 34 years after radiotherapy. RESULTS: Radiotherapy was followed by a considerable increase in the discordant crypt frequency that remained significantly increased for many years. The proportion of discordant crypts showing partial involvement was initially high but fell to normal levels about 12 months after irradiation. CONCLUSIONS: Crypts wholly involved by a mutant phenotype are stable and persistent while partially involved crypts are transient. The clonal stabilisation time is approximately one year in the human colon compared with four weeks in the mouse. The most likely reason for this is a difference in the number of stem cells in a crypt stem cell niche, although differences in stem cell cycle time and crypt fission may also contribute. These findings are of relevance to colorectal gene therapy and carcinogenesis in stem cell systems. PMID:8944567

Preservation of urine free catecholamines and their free O-methylated metabolites with citric acid as an alternative to hydrochloric acid for LC-MS/MS-based analyses.

PubMed

Peitzsch, Mirko; Pelzel, Daniela; Lattke, Peter; Siegert, Gabriele; Eisenhofer, Graeme

2016-01-01

Measurements of urinary fractionated metadrenalines provide a useful screening test to diagnose phaeochromocytoma. Stability of these compounds and their parent catecholamines during and after urine collection is crucial to ensure accuracy of the measurements. Stabilisation with hydrochloric acid (HCl) can promote deconjugation of sulphate-conjugated metadrenalines, indicating a need for alternative preservatives. Urine samples with an intrinsically acidic or alkaline pH (5.5-6.9 or 7.1-8.7, respectively) were used to assess stability of free catecholamines and their free O-methylated metabolites over 7 days of room temperature storage. Stabilisation with HCl was compared with ethylenediaminetetraacetic acid/metabisulphite and monobasic citric acid. Catecholamines and metabolites were measured by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Free catecholamines and their O-methylated metabolites were stable in acidic urine samples over 7 days of room temperature storage, independent of the presence or absence of any stabilisation method. In contrast, free catecholamines, but not the free O-methylated metabolites, showed rapid degradation within 24 h and continuing degradation over 7 days in urine samples with an alkaline pH. Adjustment of alkaline urine samples to a pH of 3-5 with HCl or 4.8-5.4 with citric acid completely blocked degradation of catecholamines. Ethylenediaminetetraacetic acid/metabisulphite, although reducing the extent of degradation of catecholamines in alkaline urine, was largely ineffectual as a stabiliser. Citric acid is equally effective as HCl for stabilisation of urinary free catecholamines and minimises hazards associated with use of strong inorganic acids while avoiding deconjugation of sulphate-conjugated metabolites during simultaneous LC-MS/MS measurements of free catecholamines and their free O-methylated metabolites.

DES Prediction of Cavitation Erosion and Its Validation for a Ship Scale Propeller

NASA Astrophysics Data System (ADS)

Ponkratov, Dmitriy, Dr

2015-12-01

Lloyd's Register Technical Investigation Department (LR TID) have developed numerical functions for the prediction of cavitation erosion aggressiveness within Computational Fluid Dynamics (CFD) simulations. These functions were previously validated for a model scale hydrofoil and ship scale rudder [1]. For the current study the functions were applied to a cargo ship's full scale propeller, on which the severe cavitation erosion was reported. The performed Detach Eddy Simulation (DES) required a fine computational mesh (approximately 22 million cells), together with a very small time step (2.0E-4 s). As the cavitation for this type of vessel is primarily caused by a highly non-uniform wake, the hull was also included in the simulation. The applied method under predicted the cavitation extent and did not fully resolve the tip vortex; however, the areas of cavitation collapse were captured successfully. Consequently, the developed functions showed a very good prediction of erosion areas, as confirmed by comparison with underwater propeller inspection results.

Dorsal surgical stabilisation using tension bands for treatment of traumatic atlanto-occipital instability in a cat.

PubMed

Vedrine, B; Maurin, M P

2017-12-01

An atlanto-occipital instability secondary to a dog bite was diagnosed in a 4-year-old Persian cat. Dorsal stabilisation of the instability was made with two OrthoFiber prostheses (Securos), which were used as tension bands between the nuchal crests of the occipital bone and the spinous process of the axis. Total recovery was achieved 4 days after surgery. Normal alignment of the atlanto-occipital joint was observed on survey radiographs taken 6 weeks post-surgery. Although the right loop had failed, the alignment was still normal and no neurological after-effects could be identified. Dorsal divergent tension bands between the nuchal crests of the occipital bone and the spinous process of the axis can be used to stabilise traumatic atlanto-occipital instability. © 2017 Australian Veterinary Association.

Deoxycholate-Based Glycosides (DCGs) for Membrane Protein Stabilisation.

PubMed

Bae, Hyoung Eun; Gotfryd, Kamil; Thomas, Jennifer; Hussain, Hazrat; Ehsan, Muhammad; Go, Juyeon; Loland, Claus J; Byrne, Bernadette; Chae, Pil Seok

2015-07-06

Detergents are an absolute requirement for studying the structure of membrane proteins. However, many conventional detergents fail to stabilise denaturation-sensitive membrane proteins, such as eukaryotic proteins and membrane protein complexes. New amphipathic agents with enhanced efficacy in stabilising membrane proteins will be helpful in overcoming the barriers to studying membrane protein structures. We have prepared a number of deoxycholate-based amphiphiles with carbohydrate head groups, designated deoxycholate-based glycosides (DCGs). These DCGs are the hydrophilic variants of previously reported deoxycholate-based N-oxides (DCAOs). Membrane proteins in these agents, particularly the branched diglucoside-bearing amphiphiles DCG-1 and DCG-2, displayed favourable behaviour compared to previously reported parent compounds (DCAOs) and conventional detergents (LDAO and DDM). Given their excellent properties, these agents should have significant potential for membrane protein studies. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Global finite-time attitude stabilization for rigid spacecraft in the exponential coordinates

NASA Astrophysics Data System (ADS)

Shi, Xiao-Ning; Zhou, Zhi-Gang; Zhou, Di

2018-06-01

This paper addresses the global finite-time attitude stabilisation problem on the special orthogonal group (SO(3)) for a rigid spacecraft via homogeneous feedback approach. Considering the topological and geometric properties of SO(3), the logarithm map is utilised to transform the stabilisation problem on SO(3) into the one on its associated Lie algebra (?). A model-independent discontinuous state feedback plus dynamics compensation scheme is constructed to achieve the global finite-time attitude stabilisation in a coordinate-invariant way. In addition, to address the absence of angular velocity measurements, a sliding mode observer is proposed to reconstruct the unknown angular velocity information within finite time. Then, an observer-based finite-time output feedback control strategy is obtained. Numerical simulations are finally performed to demonstrate the effectiveness of the proposed finite-time controllers.

The inverse podant [Li3(NBut)3S)]+ stabilises a single ethylene oxide OCH=CH2 anion as a high- and low-temperature polymorph of [(thf)3Li3(OCH=CH2)(NBut)3S)].

PubMed

Walfort, B; Pandey, S K; Stalke, D

2001-09-07

A single ethylene oxide anion derived from the ether cleavage reaction of thf with ButLi is stabilised by the inverse podant [Li3(NBut)3S)]+ to give a high- and a low-temperature polymorph with a considerable difference in conformation and packing.

The preparation of RVNRL using Malaysian - produced latices

NASA Astrophysics Data System (ADS)

Zin, Wan Manshol bin W.; Mohid, Norjanah bte; Hasan, Jusoh bin; Noor, Wan Khairul Amalina bte Wan Md.; Jaafar, Zulkifli

1993-07-01

The research project is carried out using the latices supplied by three of the suppliers in Malaysia. From the results of the studies carried out in search for the best sensitiser for RVNRL preparation, the use of n-butyl acrylate ( n-BA ) as a sensitiser seemed to give the most promising results. However, its use as a sensitiser is not universal to all latices available in the country. The problem was overcome by the use of different formulations for different latices. For the latex supplied by Golden Hope ( Hytex ), a combination of sensitisers i.e. n-BA plus 2-ethyl hexyl acrylate ( 2-EHA ) with a 10 % potassium hydroxide solution as the stabiliser, was the requirement. Latex supplied by MARDEC ( Matex ), seemed to need only n-BA as the sensitiser. Nevertheless, a stabiliser was still required and the use of a 10 % KOH solution was found to be suitable. A large range of stabilisers and sensitisers were applicable to Guthrie latex. The use of n-BA as the sensitiser and potassium laurylic acid as the stabiliser seemed the most favourable formulation. All the results are discussed in the form of correlation between dose and the tensile properties of RVNRL vulcanizates, equilibrium swelling ratio and standing time of the latex formulation.

Dynamic postural stability for double-leg drop landing.

PubMed

Niu, Wenxin; Zhang, Ming; Fan, Yubo; Zhao, Qinping

2013-01-01

Dynamic postural stability has been widely studied for single-leg landing, but seldom considered for double-leg landing. This study aimed to evaluate the dynamic postural stability and the influence mechanism of muscle activities during double-leg drop landing. Eight recreationally active males and eight recreationally active females participated in this study and dropped individually from three heights (0.32 m, 0.52 m, and 0.72 m). Ground reaction force was recorded to calculate the time to stabilisation. Electromyographic activities were recorded for selected lower-extremity muscles. A multivariate analysis of variance was carried out and no significant influence was found in time to stabilisation between genders or limb laterals (P > 0.05). With increasing drop height, time to stabilisation decreased significantly in two horizontal directions and the lower-extremity muscle activities were enhanced. Vertical time to stabilisation was not significantly influenced by drop height. Dynamic postural stability improved by neuromuscular change more than that required due to the increase of drop height. Double-leg landing on level ground is a stable movement, and the body would often be injured before dynamic postural stability is impaired. It is understandable to protect tissues from mechanical injuries by the sacrifice of certain dynamic postural stability in the design of protective devices or athlete training.

Global stabilisation of a class of generalised cascaded systems by homogeneous method

NASA Astrophysics Data System (ADS)

Ding, Shihong; Zheng, Wei Xing

2016-04-01

This paper considers the problem of global stabilisation of a class of generalised cascaded systems. By using the extended adding a power integrator technique, a global controller is first constructed for the driving subsystem. Then based on the homogeneous properties and polynomial assumption, it is shown that the stabilisation of the driving subsystem implies the stabilisation of the overall cascaded system. Meanwhile, by properly choosing some control parameters, the global finite-time stability of the closed-loop cascaded system is also established. The proposed control method has several new features. First, the nonlinear cascaded systems considered in the paper are more general than the conventional ones, since the powers in the nominal part of the driving subsystem are not required to be restricted to ratios of positive odd numbers. Second, the proposed method has some flexible parameters which provide the possibility for designing continuously differentiable controllers for cascaded systems, while the existing designed controllers for such kind of cascaded systems are only continuous. Third, the homogenous and polynomial conditions adopted for the driven subsystem are easier to verify when compared with the matching conditions that are widely used previously. Furthermore, the efficiency of the proposed control method is validated by its application to finite-time tracking control of non-holonomic wheeled mobile robot.

Application of Soil Nailing Technique for Protection and Preservation Historical Buildings

NASA Astrophysics Data System (ADS)

Kulczykowski, Marek; Przewłócki, Jarosław; Konarzewska, Bogusława

2017-10-01

Soil nailing is one of the recent in situ techniques used for soil improvement and in stabilizing slopes. The process of soil nailing consists of reinforcing the natural ground with relatively small steel bars or metal rods, grouted in the pre-drilled holes. This method has a wide range of applications for stabilizing deep excavations and steep slopes. Soil nailing has recently become a very common method of slope stabilisation especially where situated beneath or adjacent to historical buildings. Stabilisation by nails drilled into existing masonry structures such as failing retaining walls abutments, provide long term stability without demolition and rebuilding costs. Two cases of soil nailing technology aimed at stabilising slopes beneath old buildings in Poland are presented in this paper. The first concerns application of this technology to repair a retaining wall supporting the base of the dam at the historic hydroelectric power plant in Rutki. The second regards a concept of improving the slope of the Castle Hill in Sandomierz. An analysis of the slope stability for the latter case, using stabilisation technique with the piling system and soil nailing was performed. Some advantages of soil nailing especially for protection of historical buildings, are also underlined. And, the main results of an economic comparison analysis are additionally presented.

Optically active quantum dots

NASA Astrophysics Data System (ADS)

Gerard, Valerie; Govan, Joseph; Loudon, Alexander; Baranov, Alexander V.; Fedorov, Anatoly V.; Gun'ko, Yurii K.

2015-10-01

The main goal of our research is to develop new types of technologically important optically active quantum dot (QD) based materials, study their properties and explore their biological applications. For the first time chiral II-VI QDs have been prepared by us using microwave induced heating with the racemic (Rac), D- and L-enantiomeric forms of penicillamine as stabilisers. Circular dichroism (CD) studies of these QDs have shown that D- and L-penicillamine stabilised particles produced mirror image CD spectra, while the particles prepared with a Rac mixture showed only a weak signal. It was also demonstrated that these QDs show very broad emission bands between 400 and 700 nm due to defects or trap states on the surfaces of the nanocrystals. These QDs have demonstrated highly specific chiral recognition of various biological species including aminoacids. The utilisation of chiral stabilisers also allowed the preparation of new water soluble white emitting CdS nano-tetrapods, which demonstrated circular dichroism in the band-edge region of the spectrum. Biological testing of chiral CdS nanotetrapods displayed a chiral bias for an uptake of the D- penicillamine stabilised nano-tetrapods by cancer cells. It is expected that this research will open new horizons in the chemistry of chiral nanomaterials and their application in nanobiotechnology, medicine and optical chemo- and bio-sensing.

Role of phyto-stabilised silver nanoparticles in suppressing adjuvant induced arthritis in rats.

PubMed

Mani, Aparna; Vasanthi, C; Gopal, V; Chellathai, Darling

2016-12-01

The present study was aimed to evaluate the anti-arthritic effects of silver nanoparticles synthesised using Piper nigrum extract and to further establish its mechanism of action in a rat model of adjuvant induced arthritis (AA). Adjuvant arthritis was induced by injecting complete Freund's adjuvant (0.1mL) into the left hind paw of 36 albino Wistar rats (n=6). Silver nanoparticles stabilised with Piper nigrum extract (25 and 50mg/kg). Commercial silver nanoparticles (50mg/kg) and methotrexate (0.1mg/kg) were administered by intraperitoneal route from day 11 to day 22 on alternate days. It was found that treatment with silver nanoparticles stabilised with Piper nigrum (S-AgNPs) significantly reduced the paw edema and alleviated the histopathological changes of cell infiltration, synovial hyperplasia, bone and cartilage destruction. Furthermore, the phytostabilised silver nanoparticles (S-AgNPs) inhibited the protein expression of NF-kβ p65 and TNF-α as evidenced by immunohistochemistry analysis. Our current findings suggest that silver nanoparticles stabilised with Piper nigrum extract (S-AgNPs) have potent anti-arthritic activity which is mediated by inhibition of TNF-α and suppression of pro-inflammatory cytokines that are secreted in response to activated transcription factors of NF-kβ. Copyright © 2016 Elsevier B.V. All rights reserved.

Diethylstilbestrol activates CatSper and disturbs progesterone actions in human spermatozoa.

PubMed

Zou, Qian-Xing; Peng, Zhen; Zhao, Qing; Chen, Hou-Yang; Cheng, Yi-Min; Liu, Qing; He, Yuan-Qiao; Weng, Shi-Qi; Wang, Hua-Feng; Wang, Tao; Zheng, Li-Ping; Luo, Tao

2017-02-01

Is diethylstilbestrol (DES), a prototypical endocrine-disrupting chemical (EDC), able to induce physiological changes in human spermatozoa and affect progesterone actions? DES promoted Ca 2+ flux into human spermatozoa by activating the cation channel of sperm (CatSper) and suppressed progesterone-induced Ca 2+ signaling, tyrosine phosphorylation and sperm functions. DES significantly impairs the male reproductive system both in fetal and postnatal exposure. Although various EDCs affect human spermatozoa in a non-genomic manner, the effect of DES on human spermatozoa remains unknown. Sperm samples from normozoospermic donors were exposed in vitro to a range of DES concentrations with or without progesterone at 37°C in a 5% CO 2 incubator to mimic the putative exposure to this toxicant in seminal plasma and the female reproductive tract fluids. The incubation time varied according to the experimental protocols. All experiments were repeated at least five times using different individual sperm samples. Human sperm intracellular calcium concentrations ([Ca 2+ ] i ) were monitored with a multimode plate reader following sperm loading with Ca 2+ indicator Fluo-4 AM, and the whole-cell patch-clamp technique was performed to record CatSper and alkalinization-activated sperm K + channel (KSper) currents. Sperm viability and motility parameters were assessed by an eosin-nigrosin staining kit and a computer-assisted semen analysis system, respectively. The ability of sperm to penetrate into viscous media was examined by penetration into 1% methylcellulose. The sperm acrosome reaction was measured using chlortetracycline staining. The level of tyrosine phosphorylation was determined by western blot assay. DES exposure rapidly increased human sperm [Ca 2+ ] i dose dependently and even at an environmentally relevant concentration (100 pM). The elevation of [Ca 2+ ] i was derived from extracellular Ca 2+ influx and mainly mediated by CatSper. Although DES did not affect sperm viability, motility, penetration into viscous media, tyrosine phosphorylation or the acrosome reaction, it suppressed progesterone-stimulated Ca 2+ signaling and tyrosine phosphorylation. Consequently, DES (1-100 μM) significantly inhibited progesterone-induced human sperm penetration into viscous media and acrosome reaction. N/A. Although DES has been shown to disturb progesterone actions on human spermatozoa, this study was performed in vitro, and caution must be taken when extrapolating the results in practical applications. The present study revealed that DES interfered with progesterone-stimulated Ca 2+ signaling and tyrosine phosphorylation, ultimately inhibited progesterone-induced human sperm functions and, thereby, might impair sperm fertility. The non-genomic manner in which DES disturbs progesterone actions may be a potential mechanism for some estrogenic endocrine disruptors to affect human sperm function. National Natural Science Foundation of China (No. 31400996); Natural Science Foundation of Jiangxi, China (No. 20161BAB204167 and No. 20142BAB215050); open project of National Population and Family Planning Key Laboratory of Contraceptives and Devices Research (No. 2016KF07) to T. Luo; National Natural Science Foundation of China (No. 81300539) to L.P. Zheng. The authors have no conflicts of interest to declare. © The Author 2016. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Investigation experimentale de l'ecoulement et des performances thermiques du nanofluide eau-oxyde de cuivre dans un Micro-Canal Chauffe

NASA Astrophysics Data System (ADS)

Rimbault, Benjamin

Cette these de maitrise presentee par articles visait a etudier le comportement hydraulique et thermique d'un ecoulement de nanofluides en micro-canal chauffe. Nous avons etudie premierement de l'eau distillee, ensuite des melanges de particules d'oxyde de cuivre (taille 29nm) avec de l'eau distillee en concentrations particulaires volumiques 4.5%, 1.03%, et 0.24% (CuO-H2O). L'ecoulement force des differents fluides a ete realise au moyen de pompes a engrenages au sein d'un circuit ferme, comprenant un micro-canal a section rectangulaire (e=1.116mm,1=25.229mm) chauffe sur deux faces paralleles via des cartouches electriques, deux echangeurs de chaleurs en serie, ainsi qu'un debitmetre magnetique. A notre connaissance peu d'etudes sur l'ecoulement de nanofluides d'oxyde de cuivre-eau en micro-canal rectangulaire chauffe sont disponibles dans la litterature, cette recherche sert de contribution. Premierement, une validation avec la litterature a ete effectuee pour le cas d'un ecoulement d'eau entre plaques planes paralleles chauffees. Des essais hydrauliques ont ete realises pour une gamme du nombre de Reynolds allant jusqu'a Re=5000 a temperature constante. Par la suite des essais thermiques jusqu'a Re=2500 ont consiste en une elevation de temperature fixe (20.5°C a 30.5°C) a travers la longueur du micro-canal sous un regime stationnaire. Les resultats ont demontre une augmentation de la perte de pression et du coefficient de frottement des nanofluides sur l'eau pour un meme debit. Une telle augmentation de perte de pression etait de +70%, +25%, et +0 a 30% respectivement pour les concentrations 4.50%, 1.03%, et 0.24%. Concernant la transition laminaire a turbulent les comportements semblaient indiquer une valeur critique semblable entre l'eau et les differentes concentrations avec et sans chauffage a un nombre de Reynolds critique Rem 1000. Nous avons observe une legere augmentation du coefficient de convection thermique avec le debit massique pour les faibles concentrations (1.03% et 0.24%), alors que la concentration 4.5% demontre une nette diminution. En general la performance energetique globale definie par la chaleur transferee sur la puissance de pompage, reste inferieure compare a l'eau pour un meme Reynolds et un meme debit massique egalement. L'eau semble etre la meilleure solution en termes de performance energetique globale.

Présentation générale

NASA Astrophysics Data System (ADS)

Volino, F.

Le travail faisant l'objet de cette série d'articles de titre général "Théorie visco-élastique non-extensive", numérotée de (I) à (VI), a été initialement motivé par l'analyse de mesures de Résonance Magnétique Nucléaire (RMN) sur des polymères nématogènes dans les phases nématique et isotrope [1,2,3,4,5,6,7,8]. Sans entrer dans le détail de ces mesures, rappelons que les mouvements des molécules rétrécissent les raies RMN, mais que, avec des molécules aussi grosses que ces polymères, on est en dehors du régime de rétrécissement extrême, donc dans un régime ou la forme de raie dépend du détail des mouvements [9]. La théorie des modes élastiques des nématiques fournissait le cadre conceptuel naturel pour décrire de tels mouvements. L'application de cette théorie, qui, dans une version simplifiée, mais suffisante en pratique, ne fait intervenir que deux paramètres ajustables, le paramètre d'ordre nématique et une viscosité moyenne, a effectivement permis de reproduire dans le détail des formes de raie RMN de polymères en phase nématique, avec des valeurs des deux paramètres en accord avec celles qui avaient pu être estimées par des mesures directes. La théorie des modes élastiques était donc testée avec succès par l'analyse de formes de raies RMN. L'analyse en phase nématique apparaissait bien auto-cohérente [5]. Une incohérence logique est cependant apparue dans les études qui ont suivi. Les ajustements précédents avaient été faits pour des spectres obtenus au milieu de la phase nématique, ou l'ordre orientationnel est relativement élevé. Cependant, l'ordre diminue en chauffant, et on a trouvé qu'il est toujours possible de simuler les formes de raies avec le même modèle, en changeant les valeurs du paramètre d'ordre et de la viscosité. - la transition nématique-isotrope, l'expérience montre que l'allure générale des spectres RMN du polymère change peu, et le calcul montre qu'ils peuvent être simulés, de façon quasi-parfaite, par le même modèle, en supposant que l'échantillon soit "en poudre", et avec des valeurs très faibles du paramètre d'ordre. Une phase isotrope de polymère nématique étant un polymère normal, on a alors testé le modèle avec un polymère conventionnel, et de la même façon, de très bonnes simulations ont été obtenues. L'incohérence logique associée à ces résultats vient du fait que la théorie des modes élastiques ne devrait plus être applicable. En effet, le point de départ de cette théorie est une fonctionnelle énergie libre du nématique distordu par les fluctuations thermiques, qui ne contient que le terme quadratique en gradient d'orientation des molécules par rapport au directeur moyen. La limitation à ce premier terme signifie que la description ne devrait être valable que pour des gradients faibles, donc des paramètres d'ordre élevés. On aboutit donc au paradoxe suivant : la théorie des modes élastiques des nématiques permet de décrire d'autant mieux les spectres RMN de polymères, nématiques ou non, que le paramètre d'ordre est faible, c'est-à-dire qu'elle sort de son domaine d'applicabilité présumé. La façon la plus simple d'expliquer cette situation paradoxale est de dire que si la théorie des modes élastiques marche très bien en toutes circonstances, c'est parce qu'elle est beaucoup plus générale que ne l'ont (implicitement) imaginé leurs auteurs. Mais pour que tout redevienne cohérent, il fallait changer la signification d'au moins un concept de base de la théorie. Il a été décidé de modifier la signification des constantes élastiques et des viscosités, telles qu'elles apparaissent au niveau des équations fondamentales de la théorie standard. En pratique, la modification qui a été faite a été de supposer que ces quantités ne sont pas les quantités macroscopiques, mais des quantités non mesurables, associées aux modes élastiques, dépendant du vecteur d'onde et de la température, selon des formules simples, du type de celles obtenues par les méthodes du groupe de renormalisation, dans la théorie des changements de phase. Dans l'article (I) intitulé "Théorie simplifiée à modes rotationnels", des conséquences nécessaires de cette hypothèse, en phase nématique et isotrope, sont déduites, et un certain nombre de quantités mesurables sont calculées : élasticité, viscosité, effets de champ appliqués, chaleur spécifique... Le formalisme est unifié dans la mesure où les relations obtenues sont valables de part et d'autre de la transition. Le caractère le plus important de ces résultats est cependant le fait que toutes les quantités macroscopiques dépendent de façon non-triviale de la taille de l'échantillon, caractère que l'on a qualifié de "non-extensif". Dans l'article (II) intitulé "Premiers tests expérimentaux de la théorie simplifiée à modes rotationnels", l'ensemble des prédictions décrit dans l'article (I) est testé à l'aide de données de la littérature concernant trois nématiques typiques, pour lesquels la plupart des quantités ont été mesurées indépendamment par différents auteurs. Outre un accord quantitatif étonnant avec l'expérience, cette théorie permet aussi d'expliquer les écarts souvent obtenus par différents auteurs. Le modèle fonctionnant très bien pour décrire les propriétés rotationnelles des phases isotropes, il a été tentant de voir s'il pouvait aussi décrire les propriétés translationnelles. C'est ce qui fait l'objet de l'article (III) intitulé "Théorie simplifiée à modes translationnels". Moyennant une hypothèse concernant la forme mathématique de la contribution à la fonctionnelle énergie libre associée à l'existence de mouvements macroscopiques dans le fluide, couplant les gradients de vitesse aux fluctuations thermiques, on a pu obtenir des expressions, toujours non-extensives, d'un certain nombre de quantités mesurables, dont les coefficients de transport. Dans l'article (IV), intitulé "Premiers tests expérimentaux de la théorie simplifiée à modes translationnels", ces prédictions sont testées à l'aide de données de la littérature sur des liquides simples, dont l'eau. Le résultat est positivement troublant. Il rend compte en particulier des différences observées par des expérimentateurs indépendants mesurant la simple viscosité et surtout le coefficient de diffusion de l'eau pure. Ce liquide n'apparaît d'ailleurs pas comme un cas particulier. Il faut remarquer cependant que cet écart à l'extensivité, supposée depuis toujours dans tous les modèles, n'était pas prévisible a priori, mais que le modèle contient lui-même les conditions nécessaires à son applicabilité. Le fait que ces écarts à l'extensivité ne peuvent être observés que dans certaines conditions s'explique, et il n'y a aucune contradiction avec l'utilisation des modèles extensifs dans la technologie. Dans l'article (V) intitulé "Équations de diffusion, fonctions de distribution, viscosités et coefficients de diffusion, fonctions de corrélation", est abordée une extension de la théorie à la généralisation des équations de diffusion des théories standards. Avec ces équations généralisées apparaissent naturellement les notions de déplacement élastique, décrivant des mouvements aléatoires locaux de faible amplitude, et de déplacement visqueux, décrivant les mouvements aléatoires à grande distance. À chacun de ces deux types de mouvements est associé un temps caractéristique propre, et on montre que ces deux temps peuvent différer d'un grand nombre d'ordre de grandeurs à suffisamment basse température. Les fonctions de corrélations associées à différentes méthodes spectroscopiques sont calculées à l'aide de ces équations de diffusion. On trouve que ces fonctions ne sont pas des exponentielles, mais plutôt des "exponentielles étirées", la forme exponentielle pure n'étant qu'une approximation valide aux temps suffisamment courts, et aux temps suffisamment longs. Enfin, dans l'article (VI) intitulé "Application à un liquide formant une phase vitreuse, l'orthoterphényl (OTP)", la plupart des résultats théoriques obtenus dans les articles précédents est appliqué à la description d'un grand nombre de données expérimentales variées de la littérature, obtenues avec ce système exemplaire. On montre qu'il est ainsi possible de rationaliser l'ensemble de ces données. En particulier, la température de transition vitreuse apparaît comme la limite basse température d'une transition de phase très étalée depuis la température de fusion du cristal, analogue à la transition nématique-isotrope, mais de nature à la fois translationnelle et rotationnelle. Il faut admettre que les conséquences du modèle fabriqué à l'origine pour interpréter des expériences RMN, et surtout celles de son extension en dehors du domaine des seuls cristaux liquides a de quoi surprendre au premier abord. C'est seulement après une revue très complète d'un grand nombre de résultats expérimentaux, revue qui a pris beaucoup de temps et n'a jamais révélé de contradiction, qu'il a été décidé de soumettre ce modèle à l'attention de la communauté. Ce travail ne peut être considéré comme un aboutissement. Un certain nombre d'aspects n'ont pas été abordés. Par exemple, pour les substances nématogènes, le test de la description unifiée des résultats de diffusion de la lumière, qui a été la motivation historique du développement de la théorie standard des modes élastiques pour décrire ces résultats en phase nématique, n'a pas été traité. Autre exemple : pour les liquides usuels, on s'est limité à des situations loin du point critique, c'est-à-dire quand la présence de la phase gazeuse au-dessus du liquide peut être ignorée. Il convient donc de généraliser la théorie au problème des liquides peu denses, ainsi que d'explorer sa possible extension à la phase gazeuse et voir si on peut appliquer ce type de description au système liquide-gaz. Enfin, les aspects purement mécaniques n'ont pas été abordés. Puisque l'élasticité intervient de façon fondamentale dans la description, il faut reformuler la mécanique des fluides standard pour qu'apparaisse explicitement la notion d'élasticité dans les équations. C'est cette reformulation, dont on verra qu'elle permet de décrire de façon unifiée l'essentiel des comportements rhéologiques des fluides (passage continu entre les réponses élastique, visco-élastique, plastique et visqueuse, en fonction de la nature, la durée et l'intensité des sollicitations mécaniques, ainsi que de la température), qui sera l'objet du prochain article de cette série. Enfin, on peut se demander comment raccorder le formalisme hautement non-conventionnel de cette théorie, qui permet de calculer des quantités physiques mesurables, à celui de la théorie statistique standard, qui permet en principe de calculer les mêmes quantités. Ce problème reste pour l'instant ouvert, mais la piste à suivre pour le résoudre semble claire. Elle est probablement contenue dans la forme postulée dans (III) pour le couplage entre les mouvements aléatoires microscopiques, lesquels sont décrits de façon uniquement statistique (à l'aide d'équations de diffusion), et les mouvements macroscopiques qui sont décrits de façon mécaniste. En d'autres termes, on introduit un indéterminisme fondamental dans la description du mouvement des objets. Le raccord avec la théorie standard ne pourra donc se faire qu'au niveau de la statistique quantique, qui elle aussi contient dans son essence un indéterminisme du même type. Une comparaison détaillée ne sera possible que dans un stade ultérieur du développement de la présente théorie, quand tous les aspects mécaniques, dont certains ont été évoqués plus haut, auront été explorés. Il est espéré que ces informations préliminaires aideront le lecteur à la compréhension des articles (I) à (VI) proposés.

Technical Evaluation Report on the Flight Mechanics Panel Symposium on the Flight Mechanics Panel Symposium on Space Vehicle Flight Mechanics (La Mecanique du Vol des Vehicules Spatiaux)

DTIC Science & Technology

1990-11-01

control and including final recovery for a wide range of space vehicles from tethered satellite systems and flexible space structures to the space plane...flight mechanics, members from the Fluid Dynamics Panel, the Guidance and Control Panel, the Propulsion and Energetics Panel and the Structures and... Structures and Materials which should be overcome for a successful realization of a human Space Transportation System in the 21st century. He

Deflagration-to-Detonation Transition in Heteorogeneous Solids: A Bibliography.

DTIC Science & Technology

1980-11-01

and Rockets, Vol. 9. No. 6, 1972, pp. 415-419. 1.4 Francois, D., and L. Joly; " La Rupture des Metaux; Ecole d’ete de la Colle sur Loup ," Masson et Cie...Computer Program for Multifield Fluid Flows," Los Alamos Scientific Laboratory, LA -5680, 1974. 5.3, 9 Nnderssen, K. E. B.; "Pressure Drop in Ideal...5.6, 6, 9 Forest, C. A.: "Burning and Detonation," Los Alamos Scientific Laboratory, LA -7245, July 1978. 2, 3, 4 Fox, J.; "Flow Regimes in

Aerodynamics and Acoustics of Propellers, Conference Proceedings of the Fluid Dynamics Symposium Held at Toronto, Canada on 1-4 October 1984

DTIC Science & Technology

1985-02-01

stationnaire. Le Systeme pseudo-instationnaire est constrult en rempla^ant 1 equation de 1’energie le) par la condition de rothalpie uniforme I ■ cte et...la definition de nouvelles helices permet des gains substantiels pour tout le domaine de vol et, notanment, au decollage et en montee. Nous...etudes d’un tel Systeme sont effectuees et I’essai d’une maquette dans la grande soufflerie transsonique SI de Modane est prevu en 1985. On presente

Finite-time state feedback stabilisation of stochastic high-order nonlinear feedforward systems

NASA Astrophysics Data System (ADS)

Xie, Xue-Jun; Zhang, Xing-Hui; Zhang, Kemei

2016-07-01

This paper studies the finite-time state feedback stabilisation of stochastic high-order nonlinear feedforward systems. Based on the stochastic Lyapunov theorem on finite-time stability, by using the homogeneous domination method, the adding one power integrator and sign function method, constructing a ? Lyapunov function and verifying the existence and uniqueness of solution, a continuous state feedback controller is designed to guarantee the closed-loop system finite-time stable in probability.

Green synthesis of highly concentrated aqueous colloidal solutions of large starch-stabilised silver nanoplatelets.

PubMed

Cheng, Fei; Betts, Jonathan W; Kelly, Stephen M; Hector, Andrew L

2015-01-01

A simple, environmentally friendly and cost-effective method has been developed to prepare a range of aqueous silver colloidal solutions, using ascorbic acid as a reducing agent, water-soluble starch as a combined crystallising, stabilising and solubilising agent, and water as the solvent. The diameter of silver nanoplatelets increases with higher concentrations of AgNO3 and starch. The silver nanoparticles are also more uniform in shape the greater the diameter of the nanoparticles. Colloidal solutions with a very high concentration of large, flat, hexagonal silver nanoplatelets (~230 nm in breadth) have been used to deposit and fix an antibacterial coating of these large starch-stabilised silver nanoplates on commercial cotton fibres, using a simple dip-coating process using water as the solvent, in order to study the dependence of the antibacterial properties of these nanoplatelets on their size. Copyright © 2014 Elsevier B.V. All rights reserved.

Comparative biomechanical evaluation of mono-cortical osteosynthesis systems for condylar fractures using photoelastic stress analysis.

PubMed

Christopoulos, Panos; Stathopoulos, Panagiotis; Alexandridis, Constantinos; Shetty, Vivek; Caputo, Angelo

2012-10-01

Fractures of the condyle account for 20-30% of all mandibular fractures, and are therefore one of the most common facial injuries. Precise evaluation of the mechanical stresses that develop in a fractured mandible is essential, particularly for the testing of systems currently used for stabilisation of the condylar fragment. Photoelastic stress analysis can be used to visualise alterations in the strain that is induced in the mandible by a fracture, and in the osteosynthesis materials used to stabilise it. This method, used on currently used osteosynthesis materials, showed that stabilisation of a subcondylar fracture with a single miniplate does not provide enough stability, whereas the use of two miniplates - properly positioned - offers sufficient stability in all loading conditions. A microplate may be used as a tension-resisting plate with equally good results. Copyright © 2011 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

High heat-flux self-rotating plasma-facing component: Concept and loading test in TEXTOR

NASA Astrophysics Data System (ADS)

Terra, A.; Sergienko, G.; Hubeny, M.; Huber, A.; Mertens, Ph.; Philipps, V.; The Textor Team

2015-08-01

This contribution reports on the concept of a circular self-rotating and temperature self-stabilising plasma-facing component (PFC), and test of a related prototype in TEXTOR tokamak. This PFC uses the Lorentz force induced by plasma current and magnet field (J × B) to create a torque applied on metallic discs which produce a rotational movement. Additional thermionic current, present at high operation temperatures, brings additional temperature stabilisation ability. This self-rotating disk limiter was exposed to plasma in the TEXTOR tokamak under different radial positions to vary the heat flux. This disk structure shows the interesting ability to stabilise its maximum temperature through the fact that the self-induced rotation is modulated by the thermal emission current. It was observed that the rotation speed increased following both the current collected by the limiter, and the temperature of the tungsten disks.

An interior penalty stabilised incompressible discontinuous Galerkin-Fourier solver for implicit large eddy simulations

NASA Astrophysics Data System (ADS)

Ferrer, Esteban

2017-11-01

We present an implicit Large Eddy Simulation (iLES) h / p high order (≥2) unstructured Discontinuous Galerkin-Fourier solver with sliding meshes. The solver extends the laminar version of Ferrer and Willden, 2012 [34], to enable the simulation of turbulent flows at moderately high Reynolds numbers in the incompressible regime. This solver allows accurate flow solutions of the laminar and turbulent 3D incompressible Navier-Stokes equations on moving and static regions coupled through a high order sliding interface. The spatial discretisation is provided by the Symmetric Interior Penalty Discontinuous Galerkin (IP-DG) method in the x-y plane coupled with a purely spectral method that uses Fourier series and allows efficient computation of spanwise periodic three-dimensional flows. Since high order methods (e.g. discontinuous Galerkin and Fourier) are unable to provide enough numerical dissipation to enable under-resolved high Reynolds computations (i.e. as necessary in the iLES approach), we adapt the laminar version of the solver to increase (controllably) the dissipation and enhance the stability in under-resolved simulations. The novel stabilisation relies on increasing the penalty parameter included in the DG interior penalty (IP) formulation. The latter penalty term is included when discretising the linear viscous terms in the incompressible Navier-Stokes equations. These viscous penalty fluxes substitute the stabilising effect of non-linear fluxes, which has been the main trend in implicit LES discontinuous Galerkin approaches. The IP-DG penalty term provides energy dissipation, which is controlled by the numerical jumps at element interfaces (e.g. large in under-resolved regions) such as to stabilise under-resolved high Reynolds number flows. This dissipative term has minimal impact in well resolved regions and its implicit treatment does not restrict the use of large time steps, thus providing an efficient stabilization mechanism for iLES. The IP-DG stabilisation is complemented with a Spectral Vanishing Viscosity (SVV) method, in the z-direction, to enhance stability in the continuous Fourier space. The coupling between the numerical viscosity in the DG plane and the SVV damping, provides an efficient approach to stabilise high order methods at moderately high Reynolds numbers. We validate the formulation for three turbulent flow cases: a circular cylinder at Re = 3900, a static and pitch oscillating NACA 0012 airfoil at Re = 10000 and finally a rotating vertical-axis turbine at Re = 40000, with Reynolds based on the circular diameter, airfoil chord and turbine diameter, respectively. All our results compare favourably with published direct numerical simulations, large eddy simulations or experimental data. We conclude that the DG-Fourier high order solver, with IP-SVV stabilisation, proves to be a valuable tool to predict turbulent flows and associated statistics for both static and rotating machinery.

The effect of dense gas dynamics on loss in ORC transonic turbines

NASA Astrophysics Data System (ADS)

Durá Galiana, FJ; Wheeler, APS; Ong, J.; Ventura, CA de M.

2017-03-01

This paper describes a number of recent investigations into the effect of dense gas dynamics on ORC transonic turbine performance. We describe a combination of experimental, analytical and computational studies which are used to determine how, in-particular, trailing-edge loss changes with choice of working fluid. A Ludwieg tube transient wind-tunnel is used to simulate a supersonic base flow which mimics an ORC turbine vane trailing-edge flow. Experimental measurements of wake profiles and trailing-edge base pressure with different working fluids are used to validate high-order CFD simulations. In order to capture the correct mixing in the base region, Large-Eddy Simulations (LES) are performed and verified against the experimental data by comparing the LES with different spatial and temporal resolutions. RANS and Detached-Eddy Simulation (DES) are also compared with experimental data. The effect of different modelling methods and working fluid on mixed-out loss is then determined. Current results point at LES predicting the closest agreement with experimental results, and dense gas effects are consistently predicted to increase loss.

The dynamics of a stabilised Wien bridge oscillator

NASA Astrophysics Data System (ADS)

Lerner, L.

2016-11-01

We present for the first time analytic solutions for the nonlinear dynamics of a Wien bridge oscillator stabilised by three common methods: an incandescent lamp, signal diodes, and the field effect transistor. The results can be used to optimise oscillator design, and agree well with measurements. The effect of operational amplifier marginal nonlinearity on oscillator performance at high frequencies is clarified. The oscillator circuits and their analysis can be used to demonstrate nonlinear dynamics in the undergraduate laboratory.

Devices used for stabilisation of newborn infants at birth.

PubMed

Roehr, Charles C; O'Shea, Joyce E; Dawson, Jennifer A; Wyllie, Jonathan P

2018-01-01

This review examines devices used during newborn stabilisation. Evidence for their use to optimise the thermal, respiratory and cardiovascular management in the delivery room is presented. Mechanisms of action and rationale of use are described, current developments are presented and areas of future research are highlighted. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Performance evaluation of the bioreactor landfill in treatment and stabilisation of mechanically biologically treated municipal solid waste.

PubMed

Lakshmikanthan, P; Sivakumar Babu, G L

2017-03-01

The potential of bioreactor landfills to treat mechanically biologically treated municipal solid waste is analysed in this study. Developing countries like India and China have begun to investigate bioreactor landfills for municipal solid waste management. This article describes the impacts of leachate recirculation on waste stabilisation, landfill gas generation, leachate characteristics and long-term waste settlement. A small-scale and large-scale anaerobic cell were filled with mechanically biologically treated municipal solid waste collected from a landfill site at the outskirts of Bangalore, India. Leachate collected from the same landfill site was recirculated at the rate of 2-5 times a month on a regular basis for 370 days. The total quantity of gas generated was around 416 L in the large-scale reactor and 21 L in the small-scale reactor, respectively. Differential settlements ranging from 20%-26% were observed at two different locations in the large reactor, whereas 30% of settlement was observed in the small reactor. The biological oxygen demand/chemical oxygen demand (COD) ratio indicated that the waste in the large reactor was stabilised at the end of 1 year. The performance of the bioreactor with respect to the reactor size, temperature, landfill gas and leachate quality was analysed and it was found that the bioreactor landfill is efficient in the treatment and stabilising of mechanically biologically treated municipal solid waste.

Three-year performance of in-situ mass stabilised contaminated site soils using MgO-bearing binders.

PubMed

Wang, Fei; Jin, Fei; Shen, Zhengtao; Al-Tabbaa, Abir

2016-11-15

This paper provides physical and chemical performances of mass stabilised organic and inorganic contaminated site soils using a new group of MgO-bearing binders over 3 years and evaluated the time-dependent performance during the 3 years. This study took place at a contaminated site in Castleford, UK in 2011, where MgO, ground granulated blastfurnace slag (GGBS) and Portland cement (PC) were mixed with the contaminated soils in a dry form using the ALLU mass mixing equipment. Soil cores were retrieved 40-day, 1-year and 3-year after the treatment. The core quality, strength, and the leaching properties were determined via physical observation, unconfined compressive strength (UCS) and batch leaching tests. After 3-year treatment, the UCS values of ALLU mixes were in the range of 50-250kPa; the leachate concentrations of Cd, Pb, Cu and Zn (except Ni) in all mixes were lower than their drinking water standards; and the leachability of total organics was in the range of 10-105mg/L. No apparent degradation of the mass stabilised materials after 3 years' exposure to the field conditions was found. MgO-GGBS blends were found able to provide higher strength and less leachability of contaminants compared to PC and MgO-only mixes in mass stabilised soils. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Interfacial behaviour of sodium stearoyllactylate (SSL) as an oil-in-water pickering emulsion stabiliser.

PubMed

Kurukji, D; Pichot, R; Spyropoulos, F; Norton, I T

2013-11-01

The ability of a food ingredient, sodium stearoyllactylate (SSL), to stabilise oil-in-water (O/W) emulsions against coalescence was investigated, and closely linked to its capacity to act as a Pickering stabiliser. Results showed that emulsion stability could be achieved with a relatively low SSL concentration (≥0.1 wt%), and cryogenic-scanning electron microscopy (cryo-SEM) visualisation of emulsion structure revealed the presence of colloidal SSL aggregates adsorbed at the oil-water interface. Surface properties of SSL could be modified by altering the size of these aggregates in water; a faster decrease in surface tension was observed when SSL dispersions were subjected to high pressure homogenisation (HPH). The rate of SSL adsorption at the sunflower oil-water interface also increased after HPH, and a higher interfacial tension (IFT) was observed with increasing SSL concentration. Differential scanning calorimetry (DSC) enabled a comparison of the thermal behaviour of SSL in aqueous dispersions with SSL-stabilised O/W emulsions. SSL melting enthalpy depended on emulsion interfacial area and the corresponding DSC data was used to determine the amount of SSL adsorbed at the oil-water interface. An idealised theoretical interfacial coverage calculation based on Pickering emulsion theory was in general agreement with the mass of SSL adsorbed as predicted by DSC. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

Study of 0.9PMN 0.1PT Dielectric Behaviour in Relation to the Nanostructure

NASA Astrophysics Data System (ADS)

Lattard, E.; Lejeune, M.; Imhoff, D.; Guinebretière, R.; Elissalde, C.; Abelard, P.

1997-06-01

(1 - x)PbMg{1/3}Nb{2/3}O{3-x}PbTiO3 ceramics with x = 0, 0.1 were prepared with a 12 mol% MgO excess to obtain dense and perovskite phase materials after sintering. The dielectric characterization has revealed that a local polarization appears at a T_d temperature largely above the temperature of the maximum of permittivity (T_m, respectively -13 ^{circ}C and +36 ^{circ}C for x = 0 and 0.1). This phenomena is consistent with the nucleation of polar clusters. Moreover, a dielectric relaxation is observed for 0.9PMN-0.1PT-0.12MgO, in a large frequency range (100 Hz 1 GHz), which corresponds to a multi-Debye process with broadening of the relaxation time distribution as the temperature decreases. This suggests a nucleation and growth mechanism of polar clusters with decreasing temperature, which can result from the successive transitions of different compositions. This hypothesis was confirmed by the identification of large chemical heterogeneities on a nanometric scale by TEM using two spectroscopy techniques (EDXS and EELS), because of the association of low and high atomic number elements in the materials, different types of equipment and also the simulation of the patterns with standards. In fact, these quantitative analyses have revealed large fluctuations of the local composition around the nominal one: lead and magnesium deficient areas enriched in niobium coexist with nanodomains largely enriched in lead and slightly in magnesium, which the size depends on the titanium content. The origin of these heterogeneities in correlation with the reactions sequences during calcination and sintering is discussed: in particular the addition of titanium contributes, by stabilizing the perovskite phase, to limit the diffusion of lead oxide, which consequently increases the homogeneity of the ceramics. Due to such heterogeneities, the material remains mainly paraelectric up to very low temperatures. This effect can be balanced by the application of a high electric field which induces the growth of the polar clusters by displacement of their interface with the paraelectric matrix and orientation of their polarization in the direction of the electric field which can lead to a macroscopic ferroelectric transition in specific conditions of temperature and electric field intensity. These different mechanisms relax in a frequency range which depends on the temperature and on the amplitude of the electric field. Des céramiques polycristallines du type (1 - x)PbMg{1/3}Nb{2/3}O{3-x}PbTiO3 avec x = 0 et 10 % molaires ont été élaborées avec un excès de MgO (12 % molaires) permettant d'obtenir des matériaux denses de structure pérovskite. Des mesures de permittivité diélectrique ont montré qu'une polarisation locale apparaît dans ces matériaux à des températures (T_d) largement supérieures à celles correspondant au maximum de permittivité (T_m respectivement égale à -13 ^{circ}C et +36 ^{circ}C pour x = 0 et 0,10). Ceci est cohérent avec la formation de nanodomaines polaires au sein du matériau. Par ailleurs, une étude des caractéristiques diélectriques sur une large gamme de fréquence (100 Hz 10^9 Hz) fait apparaître une relaxation de type multi-Debye, la distribution des temps de relaxation correspondants s'élargissant vers les basses fréquences lorsque la température diminue. Ce phénomène peut être relié à un processus de nucléation-croissance des clusters polaires sur une large gamme de température, résultant des fluctuations de composition chimique au sein du matériau identifiées à l'échelle nanométrique par deux techniques de spectroscopie (EDX et EELS) en microscopie électronique en transmission. En effet, ces analyses ont mis en évidence de larges fluctuations de composition autour de la composition nominale du matériau : des zones appauvries en plomb et en magnésium et enrichies en niobium coexistent avec des nanodomaines fortement enrichis en plomb et légérement en magnésium dont la taille varie avec la teneur en titane. Nous avons cherché à corréler ces hétérogénéités aux mécanismes réactionnels intervenant au cours des traitements thermiques nécessaires à l'élaboration de ces céramiques, en particulier, il apparaît que le titane en stabilisant la phase pérovskite contribue à limiter la diffusion de l'oxyde de plomb et à augmenter ainsi le degré d'homogénéité du matériau. Du fait de ces fortes hétérogénéités chimiques, le matériau reste globalement paraélectrique jusqu'à basse température mais le mécanisme de nucléation-croissance est accéléré par application d'un champ électrique de forte amplitude de telle sorte qu'en dessous d'une température T_t le matériau devient majoritairement ferroélectrique. Ces mécanismes correspondant à un déplacement de l'interface des domaines polaires avec la matrice paraélectrique et à une orientation des vecteurs polarisation dans la direction du champ électrique relaxent dans une gamme de fréquence fonction de la température et de l'amplitude du champ électrique.

The stability of a flexible cantilever in viscous channel flow

NASA Astrophysics Data System (ADS)

Cisonni, Julien; Lucey, Anthony D.; Elliott, Novak S. J.; Heil, Matthias

2017-05-01

Most studies of the flow-induced flutter instability of a flexible cantilever have assumed inviscid flow because of the high flow speeds and the large scale of the structures encountered in the wide range of applications of this fluid-structure interaction (FSI) system. However, for instance, in the fields of energy harvesting and biomechanics, low flow speeds and small- and micro-scale systems can give relatively low Reynolds numbers so that fluid viscosity needs to be explicitly accounted for to provide reliable predictions of channel-immersed-cantilever stability. In this study, we employ a numerical model coupling the Navier-Stokes equations and a one-dimensional elastic beam model. We conduct a parametric investigation to determine the conditions leading to flutter instability of a slender flexible cantilever immersed in two-dimensional viscous channel flow for Reynolds numbers lower than 1000. The large set of numerical simulations carried out allows predictions of the influence of decreasing Reynolds numbers and of the cantilever confinement on the single-mode neutral stability of the FSI system and on the pre- and post-critical cantilever motion. This model's predictions are also compared to those of a FSI model containing a two-dimensional solid model in order to assess, primarily, the effect of the cantilever slenderness in the simulations. Results show that an increasing contribution of viscosity to the hydrodynamic forces significantly alters the instability boundaries. In general, a decrease in Reynolds number is predicted to produce a stabilisation of the FSI system, which is more pronounced for high fluid-to-solid mass ratios. For particular fluid-to-solid mass ratios, viscous effects can lower the critical velocity and lead to a change in the first unstable structural mode. However, at constant Reynolds number, the effects of viscosity on the system stability are diminished by the confinement of the cantilever, which strengthens the importance of flow inertia.

Integrating geophysical and hydrochemical borehole-log measurements to characterize the Chalk aquifer, Berkshire, United Kingdom

NASA Astrophysics Data System (ADS)

Schürch, Marc; Buckley, David

2002-09-01

Geophysical and hydrochemical borehole-logging techniques were integrated to characterize hydraulic and hydrogeochemical properties of the Chalk aquifer at boreholes in Berkshire, UK. The down-hole measurements were made to locate fissures in the chalk, their spatial extent between boreholes, and to determine the groundwater chemical quality of the water-bearing layers. The geophysical borehole logging methods used were caliper, focused resistivity, induction resistivity, gamma ray, fluid temperature, fluid electrical conductivity, impeller and heat-pulse flowmeter, together with borehole wall optical-imaging. A multiparameter data transmitter was used to measure groundwater temperature, electrical conductivity, dissolved oxygen, pH, and redox potential of the borehole fluid down-hole. High permeability developed at the Chalk Rock by groundwater circulation provides the major flow horizon at the Banterwick Barn study site and represents a conduit system that serves as an effective local hydraulic connection between the boreholes. The Chalk Rock includes several lithified solution-ridden layers, hardgrounds, which imply a gap in sedimentation possibly representing an unconformity. Lower groundwater temperature, high dissolved-oxygen content, and flowmeter evidence of preferential groundwater flow in the Chalk Rock indicated rapid groundwater circulation along this horizon. By repeating the logging at different times of the year under changing hydraulic conditions, other water-inflow horizons within the Chalk aquifer were recognized. Résumé. Des techniques géophysiques et hydrochimiques de diagraphies en forage ont été mises en oeuvre pour caractériser les propriétés hydrauliques et hydrogéochimiques de l'aquifère de la craie dans des forages du Berkshire (Grande-Bretagne). Les mesures en descente ont été faites pour localiser les fissures dans la craie et leur développement spatial entre forages, et pour déterminer la qualité de l'eau souterraine des niveaux aquifères. Les méthodes géophysiques utilisées pour les diagraphies en forage étaient le calibrage, la résistivité concentrée, la résistivité par induction, le rayonnement gamma, la température du fluide, la conductivité électrique du fluide, un courantomètre à impulsions et à flux de chaleur, avec une sonde vidéo pour l'examen des parois du forage. Une sonde multiparamètre a été utilisée pour mesurer la température, la conductivité électrique, l'oxygène dissous, le pH et le potentiel redox dans le fluide du forage à la descente. Une forte perméabilité développée dans la craie par les écoulements souterrains forme le principal niveau d'écoulement du site d'étude de Banterwick Barn ; elle est constituée d'un système de conduits qui crée une connexion hydraulique locale efficace entre les forages. Cet horizon est formé de plusieurs niveaux de haut-fonds lithifiés, qui impliquent l'existence d'une lacune de sédimentation susceptible pouvant correspondre à une discordance. Une plus faible température de l'eau souterraine, une plus forte concentration en oxygène dissous, les indications du courantomètre sur un écoulement préférentiel dans la craie indiquent une circulation rapide de l'eau souterraine le long de cet horizon. En répétant les diagraphies à des moments différents de l'année sous des conditions hydrauliques variées, d'autres horizons d'écoulements d'eau dans l'aquifère de la craie ont été reconnus. Resumen. Se ha integrado técnicas geofísicas e hidroquímicas de registro de sondeos para caracterizar las propiedades hidráulicas e hidrogeoquímicas del acuífero de la Creta en perforaciones de Berkshire (Reino Unido). Las medidas en los sondeos tenían como objetivo localizar fisuras en las cretas, así como determinar su extensión espacial entre sondeos y calidad química de las aguas subterráneas. Entre los métodos de testificación geofísica utilizados, se halla el calibre, la resistividad focalizada e inducida, los rayos gamma, la temperatura y la conductividad eléctrica del fluido, impulsores y medidores de flujo en sondeos por pulsos de calor, junto con el televisor óptico en las paredes de los sondeos. Se ha empleado un transmisor multiparamétrico para medir la temperatura, la conductividad eléctrica, el oxígeno disuelto, el pH y el potencial redox de las aguas subterráneas en el sondeo. El horizonte más productivo está asociado a las superficies litificadas ('hardgrounds') de la Creta que han desarrollado una permeabilidad elevada debido a la circulación de las aguas subterráneas identificado en el emplazamiento de Banterwick Barn, representa un sistema de conductos que actúa como conexión hidráulica local efectiva entre los sondeos. La Creta incluye una serie de 'hardgrounds' compactada por migración de fluidos, produciendo un hiato sedimentario que posiblemente representa una inconformidad. La menor temperatura de las aguas subterráneas, junto con un alto contenido de oxígeno disuelto y la evidencia aportada por el medidor de flujo en sondeos respecto a un flujo preferente en la Creta, indican que la circulación de las aguas es rápida en dicho horizonte. Repitiendo la testificación en épocas distintas del año y bajo condiciones hidráulicas diferentes, se ha podido identificar otros niveles productivos en el acuífero de la Creta.

A poroelastic model coupled to a fluid network with applications in lung modelling.

PubMed

Berger, Lorenz; Bordas, Rafel; Burrowes, Kelly; Grau, Vicente; Tavener, Simon; Kay, David

2016-01-01

We develop a lung ventilation model based on a continuum poroelastic representation of lung parenchyma that is strongly coupled to a pipe network representation of the airway tree. The continuous system of equations is discretized using a low-order stabilised finite element method. The framework is applied to a realistic lung anatomical model derived from computed tomography data and an artificially generated airway tree to model the conducting airway region. Numerical simulations produce physiologically realistic solutions and demonstrate the effect of airway constriction and reduced tissue elasticity on ventilation, tissue stress and alveolar pressure distribution. The key advantage of the model is the ability to provide insight into the mutual dependence between ventilation and deformation. This is essential when studying lung diseases, such as chronic obstructive pulmonary disease and pulmonary fibrosis. Thus the model can be used to form a better understanding of integrated lung mechanics in both the healthy and diseased states. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Sports activity after anatomic acromioclavicular joint stabilisation with flip-button technique.

PubMed

Porschke, Felix; Schnetzke, Marc; Aytac, Sara; Studier-Fischer, Stefan; Gruetzner, Paul Alfred; Guehring, Thorsten

2017-07-01

Sports activity after surgical AC joint stabilisation has not been comprehensively evaluated to date. The aim of this study was to determine rate, level and time to return to sports after AC joint stabilisation and to identify the influence of overhead sports on post-operative sports activity. In this retrospective case series, a total of 68 patients with a high-grade AC joint dislocation (Rockwood type V) were stabilised using a single TightRope technique. Fifty-five patients (80.9 %) with median age of 42.0 (range, 18-65) years completed questionnaires regarding sports activity before and after surgery. Clinical outcome and complications were also evaluated. Forty-three patients participated in sports regularly before injury. Their sports activity was rated according to Allain, and non-overhead and overhead sports were differentiated. At median follow-up of 24 (18-45) months, 41 of 43 patients (95.3 %) had returned to sports. 63 % returned to the same sports activity as before injury. 16.3 % needed to adapt the type of sports to reduce demanding activities. 11.6 % reduced the frequency and 32.5 % the intensity of sports. The median time to return to sports was 9.5 (3-18) months. Overhead athletes (Allain Type III and IV) had to reduce their sports activity significantly more often (11.8 vs. 53.8 %; p = 0.011) and needed more time to return to sports (9.5 vs. 4.5 months; p = 0.009). After stabilisation of AC joint dislocation, the majority of patients returned to sports after a substantial period of time. Overhead athletes, in particular, required more time and had to considerably reduce their sports activity. The findings impact therapeutic decision-making after AC joint injury and help with the prognosis and assessment of rehabilitation progress. IV.

Concept for an off-line gain stabilisation method.

PubMed

Pommé, S; Sibbens, G

2004-01-01

Conceptual ideas are presented for an off-line gain stabilisation method for spectrometry, in particular for alpha-particle spectrometry at low count rate. The method involves list mode storage of individual energy and time stamp data pairs. The 'Stieltjes integral' of measured spectra with respect to a reference spectrum is proposed as an indicator for gain instability. 'Exponentially moving averages' of the latter show the gain shift as a function of time. With this information, the data are relocated stochastically on a point-by-point basis.

[A difficult stabilisation. Chlorpromazine in the fifties in Belgium].

PubMed

Majerus, Benoît

2010-01-01

Through a Belgian case study the article tries to trace the gradual stabilisation of chlorpromazine as an antipsychotic in the 1950s. By varying ranges and angles of approach it shows the heterogeneity of actors involved and the semantic bricolage that accompany the marketing of the first antipsychotic. Far from being a revolution, the presence of Largactil in psychiatric practice is rather characterised by integration into a wider range of medicines and sinuous searching to give sense to this new drug.

Interactive effects of body-size structure and adaptive foraging on food-web stability.

PubMed

Heckmann, Lotta; Drossel, Barbara; Brose, Ulrich; Guill, Christian

2012-03-01

Body-size structure of food webs and adaptive foraging of consumers are two of the dominant concepts of our understanding how natural ecosystems maintain their stability and diversity. The interplay of these two processes, however, is a critically important yet unresolved issue. To fill this gap in our knowledge of ecosystem stability, we investigate dynamic random and niche model food webs to evaluate the proportion of persistent species. We show that stronger body-size structures and faster adaptation stabilise these food webs. Body-size structures yield stabilising configurations of interaction strength distributions across food webs, and adaptive foraging emphasises links to resources closer to the base. Moreover, both mechanisms combined have a cumulative effect. Most importantly, unstructured random webs evolve via adaptive foraging into stable size-structured food webs. This offers a mechanistic explanation of how size structure adaptively emerges in complex food webs, thus building a novel bridge between these two important stabilising mechanisms. © 2012 Blackwell Publishing Ltd/CNRS.

Lipid oxidation in minced beef meat with added Krebs cycle substrates to stabilise colour.

PubMed

Yi, G; Grabež, V; Bjelanovic, M; Slinde, E; Olsen, K; Langsrud, O; Phung, V T; Haug, A; Oostindjer, M; Egelandsdal, B

2015-11-15

Krebs cycle substrates (KCS) can stabilise the colour of packaged meat by oxygen reduction. This study tested whether this reduction releases reactive oxygen species that may lead to lipid oxidation in minced meat under two different storage conditions. KCS combinations of succinate and glutamate increased peroxide forming potential (PFP, 1.18-1.32 mmol peroxides/kg mince) and thiobarbituric acid reactive substances (TBARS, 0.30-0.38 mg malondialdehyde (MDA) equivalents/kg mince) under low oxygen storage conditions. Both succinate and glutamate were metabolised. Moreover, under high oxygen (75%) storage conditions, KCS combinations of glutamate, citrate and malate increased PFP (from 1.22 to 1.29 mmol peroxides/kg) and TBARS (from 0.37 to 0.40 mg MDA equivalents/kg mince). Only glutamate was metabolised. The KCS combinations that were added to stabilise colour were metabolised during storage, and acted as pro-oxidants that promoted lipid oxidation in both high and low oxygen conditions. Copyright © 2015. Published by Elsevier Ltd.

The dopaminergic stabiliser ACR16 counteracts the behavioural primitivization induced by the NMDA receptor antagonist MK-801 in mice: implications for cognition.

PubMed

Nilsson, Marie; Carlsson, Arvid; Markinhuhta, Katarina Rydén; Sonesson, Clas; Pettersson, Fredrik; Gullme, Maria; Carlsson, Maria L

2004-07-01

The Carlsson research group has developed a series of compounds capable of stabilising the dopamine system without inducing the deleterious hypodopaminergia that encumbers the currently used antipsychotic drugs. In the present study one of these dopaminergic stabilisers, ACR16, was tested in a mouse model for cognitive deficits of schizophrenia and autism. Since we believe that hypoglutamatergia is a key element in both schizophrenia and autism we used mice rendered hypoglutamatergic by treatment with the N-methyl-D-aspartate (NMDA) antagonist MK-801. MK-801 causes both hyperactivity and a behavioural primitivization. ACR16 attenuated the MK-801-induced hyperactivity and, in addition, caused a marked improvement of behavioural quality with a movement pattern approaching that of control animals. Since we believe that the impoverishment of the behavioural repertoire caused by MK-801 may correspond to the cognitive deficits seen in schizophrenia and autism, these results suggest that ACR16 may improve cognitive status in these disorders.

Cryoprotectant choice and analyses of freeze-drying drug suspension of nanoparticles with functional stabilisers.

PubMed

Wang, Lulu; Ma, Yingying; Gu, Yu; Liu, Yangyang; Zhao, Juan; Yan, Beibei; Wang, Yancai

2018-04-19

Freeze-drying is an effective way to improve long-term physical stability of nanosuspension in drug delivery applications. Nanosuspension also known as suspension of nanoparticles. In this study, the effect of freeze-drying with different cryoprotectants on the physicochemical characteristics of resveratrol (RSV) nanosuspension and quercetin (QUE) nanosuspension was evaluated. D-α-tocopheryl polyethylene glycol succinate (TPGS) and folate-modified distearoylphosphatidyl ethanolamine-polyethylene glycol (DSPE-PEG-FA) were selected as functional stabilisers formulated nanosuspension which were prepared by anti-solvent precipitation method. RSV nanoparticle size and QUE nanoparticle size were about 210 and 110 nm, respectively. The AFM and TEM results of nanosuspension showed uniform and irregular shape particles. After freeze-drying, the optimal concentration of four cryoprotectants was determined by the particle size of re-dispersed nanoparticles. The dissolution profile of drug nanoparticle significantly showed approximately at a 6-8-fold increase dissolution rate. Moreover, TPGS and DSPE-PEG-FA stabilised RSV nanosuspension and QUE nanosuspension samples showed better effect on long-term physical stability.

Clinical aspects of incorporating cord clamping into stabilisation of preterm infants.

PubMed

Knol, Ronny; Brouwer, Emma; Vernooij, Alex S N; Klumper, Frans J C M; DeKoninck, Philip; Hooper, Stuart B; Te Pas, Arjan B

2018-04-21

Fetal to neonatal transition is characterised by major pulmonary and haemodynamic changes occurring in a short period of time. In the international neonatal resuscitation guidelines, comprehensive recommendations are available on supporting pulmonary transition and delaying clamping of the cord in preterm infants. Recent experimental studies demonstrated that the pulmonary and haemodynamic transition are intimately linked, could influence each other and that the timing of umbilical cord clamping should be incorporated into the respiratory stabilisation. We reviewed the current knowledge on how to incorporate cord clamping into stabilisation of preterm infants and the physiological-based cord clamping (PBCC) approach, with the infant's transitional status as key determinant of timing of cord clamping. This approach could result in optimal timing of cord clamping and has the potential to reduce major morbidities and mortality in preterm infants. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Integration of vehicle yaw stabilisation and rollover prevention through nonlinear hierarchical control allocation

NASA Astrophysics Data System (ADS)

Alberding, Matthäus B.; Tjønnås, Johannes; Johansen, Tor A.

2014-12-01

This work presents an approach to rollover prevention that takes advantage of the modular structure and optimisation properties of the control allocation paradigm. It eliminates the need for a stabilising roll controller by introducing rollover prevention as a constraint on the control allocation problem. The major advantage of this approach is the control authority margin that remains with a high-level controller even during interventions for rollover prevention. In this work, the high-level control is assigned to a yaw stabilising controller. It could be replaced by any other controller. The constraint for rollover prevention could be replaced by or extended to different control objectives. This work uses differential braking for actuation. The use of additional or different actuators is possible. The developed control algorithm is computationally efficient and suitable for low-cost automotive electronic control units. The predictive design of the rollover prevention constraint does not require any sensor equipment in addition to the yaw controller. The method is validated using an industrial multi-body vehicle simulation environment.

A sol-powder coating technique for fabrication of yttria stabilised zirconia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wattanasiriwech, Darunee; Wattanasiriwech, Suthee; Stevens, Ron

Yttria stabilised zirconia has been prepared using a simple sol-powder coating technique. The polymeric yttria sol, which was prepared using 1,3 propanediol as a network modifier, was homogeneously mixed with nanocrystalline zirconia powder and it showed a dual function: as a binder which promoted densification and a phase modifier which stabilised zirconia in the tetragonal and cubic phases. Thermal analysis and X-ray diffraction revealed that the polymeric yttria sol which decomposed at low temperature into yttrium oxide could change the m {sup {yields}} t phase transformation behaviour of the zirconia, possibly due to the small particle size and very highmore » surface area of both yttria and zirconia particles allowing rapid alloying. The sintered samples exhibited three crystalline phases: monoclinic, tetragonal and cubic, in which cubic and tetragonal are the major phases. The weight fractions of the individual phases present in the selected specimens were determined using quantitative Rietveld analysis.« less

Electrical in-situ characterisation of interface stabilised organic thin-film transistors

PubMed Central

Striedinger, Bernd; Fian, Alexander; Petritz, Andreas; Lassnig, Roman; Winkler, Adolf; Stadlober, Barbara

2015-01-01

We report on the electrical in-situ characterisation of organic thin film transistors under high vacuum conditions. Model devices in a bottom-gate/bottom-contact (coplanar) configuration are electrically characterised in-situ, monolayer by monolayer (ML), while the organic semiconductor (OSC) is evaporated by organic molecular beam epitaxy (OMBE). Thermal SiO2 with an optional polymer interface stabilisation layer serves as the gate dielectric and pentacene is chosen as the organic semiconductor. The evolution of transistor parameters is studied on a bi-layer dielectric of a 150 nm of SiO2 and 20 nm of poly((±)endo,exo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid, diphenylester) (PNDPE) and compared to the behaviour on a pure SiO2 dielectric. The thin layer of PNDPE, which is an intrinsically photo-patternable organic dielectric, shows an excellent stabilisation performance, significantly reducing the calculated interface trap density at the OSC/dielectric interface up to two orders of magnitude, and thus remarkably improving the transistor performance. PMID:26457122

Hypoxia and hypoxia inducible factor-1α are required for normal endometrial repair during menstruation.

PubMed

Maybin, Jacqueline A; Murray, Alison A; Saunders, Philippa T K; Hirani, Nikhil; Carmeliet, Peter; Critchley, Hilary O D

2018-01-23

Heavy menstrual bleeding (HMB) is common and debilitating, and often requires surgery due to hormonal side effects from medical therapies. Here we show that transient, physiological hypoxia occurs in the menstrual endometrium to stabilise hypoxia inducible factor 1 (HIF-1) and drive repair of the denuded surface. We report that women with HMB have decreased endometrial HIF-1α during menstruation and prolonged menstrual bleeding. In a mouse model of simulated menses, physiological endometrial hypoxia occurs during bleeding. Maintenance of mice under hyperoxia during menses decreases HIF-1α induction and delays endometrial repair. The same effects are observed upon genetic or pharmacological reduction of endometrial HIF-1α. Conversely, artificial induction of hypoxia by pharmacological stabilisation of HIF-1α rescues the delayed endometrial repair in hypoxia-deficient mice. These data reveal a role for HIF-1 in the endometrium and suggest its pharmacological stabilisation during menses offers an effective, non-hormonal treatment for women with HMB.

Luminescence dating of Holocene dune complexes along the shore of northern France (Picardy)

NASA Astrophysics Data System (ADS)

Lauer, Tobias; Frechen, Manfred; Meurisse-Fort, Murielle; Gosselin, Guillaume; van Vliet-Lanoë, Brigitte

2010-05-01

The Holocene dune and peat complexes along the shore of northern France (Picardy) had already been studied in detail by Meurisse et al. (2005) and Meurisse-Fort (2009). Information about the palaeodevelopment of those dune fields is hence given due to existing 14C data as well as by sedimentological and morphological analyses. Due to the results from radiocarbon dating, different types of aeolian bodies could be correlated along the Picardy coastline and a regional stratigraphic sequence could be established (Meurisse-Fort, 2009). The aim of the ongoing study is to get a higher chronological resolution for the different phases of dune activity in Picardy by luminescence dating what is a powerful tool to determine the time of last sunlight exposure of grains before burial (this information yields important information about dune movement). Samples for OSL dating were taken from dune bodies located in Tardinghen, Hardelot, Saint-Frieux and Saint-Gabriel. For dating, a single aliquot regenerative dose (SAR) protocol (Murray & Wintle 2003) is applied to coarse grained quartz. First tests concerning the signal intensity, the purity of the quartz OSL signal and the bleaching properties showed that quartz OSL dating works well for the dunes of the northern France coastline. The new luminescence ages will help to better unravel the phases of sand dune activity and stabilisation mainly controlled by climate changes and human impact. References: Meurisse, M., Van Vliet-Lanoë, B., Talon, B. & Recourt, P. (2005): Complexes dunaires et tourbeux holocènes du littoral du Nord de la France. - Geoscience, 337 : 675-684. Meurisse-Fort, M. (2009): Enregistrement haute résolution des massifs dunaires ; Manche, mer du Nord et Atlantique - Le rôle des tempêtes. Thèse de Doctorat soutenue en juin 2007, Université de Lille1. Coll. Recherches - Sciences (Sciences de la Terre). EPU-Publibook (ed.), Paris, 310 pp. Murray, A.S. & Wintle, A.G. (2003): The single aliquot regenerative dose protocol: potential for improvements in reliability. - Radiat. Meas., 37: 377-381.

Unravelling the depositional origins and diagenetic alteration of carbonate breccias

NASA Astrophysics Data System (ADS)

Madden, Robert H. C.; Wilson, Moyra E. J.; Mihaljević, Morana; Pandolfi, John M.; Welsh, Kevin

2017-07-01

Carbonate breccias dissociated from their platform top counterparts are little studied despite their potential to reveal the nature of past shallow-water carbonate systems and the sequential alteration of such systems. A petrographic and stable isotopic study allowed evaluation of the sedimentological and diagenetic variability of the Cenozoic Batu Gading Limestone breccia of Borneo. Sixteen lithofacies representing six facies groups have been identified mainly from the breccia clasts on the basis of shared textural and compositional features. Clasts of the breccia are representative of shallow carbonate platform top and associated flank to basinal deposits. Dominant inputs are from rocky (karstic) shorelines or localised seagrass environments, coral patch reef and larger foraminiferal-rich deposits. Early, pre-brecciation alteration (including micritisation, rare dissolution of bioclasts, minor syntaxial overgrowth cementation, pervasive neomorphism and calcitisation of bioclasts and matrix) was mainly associated with marine fluids in a near surface to shallow burial environment. The final stages of pre-brecciation diagenesis include mechanical compaction and cementation of open porosity in a shallow to moderate depth burial environment. Post-brecciation diagenesis took place at increasingly moderate to deep burial depths under the influence of dominantly marine burial fluids. Extensive compaction, circum-clast dissolution seams and stylolites have resulted in a tightly fitted breccia fabric, with some development of fractures and calcite cements. A degree of facies-specific controls are evident for the pre-brecciation diagenesis. Pervasive mineralogical stabilisation and cementation have, however, led to a broad similarity of diagenetic features in the breccia clasts thereby effectively preserving depositional features of near-original platform top and margin environments. There is little intra-clast alteration overprint associated with subsequent clast reworking and post-brecciation diagenesis. The diagenetic-, and to an extent depositional- and clast-characteristics of the Batu Gading deposits are diagnostic of breccia origins. The predominance of: early and pervasive stabilisation of calcitic components, pervasive compaction resulting in a fitted texture, and paucity of meteoric dissolution or cementation effects are collectively all indicators of slope deposition and lithification. These features are comparable with other regional and global examples of submarine slope breccias, and in particular those also from syntectonic settings (Wannier, 2009). The results of this study, along with regional analogues, suggest the potential for reworked carbonate debris in slope settings to be a viable way of investigating carbonate platform variability and their subsequent alteration in the absence of preserved platform top or margin deposits.

Engine Fluid Leakage Detection: A Feasibility Study

DTIC Science & Technology

2011-07-01

2011 © Sa Majesté la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2011 DRDC Atlantic TM 2011-050 i... de détecter tout problème possible lié à la sécurité ou aux performances des moteurs à turbine à gaz d’aéronefs. Le signalement immédiat d’une fuite...carburant ou d’huile moteur nuisent non seulement aux performances d’un moteur, mais elles représentent également une menace réelle pour la sécurité de

Symposium on Turbulent Shear Flows (8th) Held in Munich, Germany on 9-11 September 1991. Volume 2. Sessions 19-31, Poster Sessions

DTIC Science & Technology

1991-09-01

FLAMES IN THE ATrR)S1]1 IERE USING A SECOND MOMNT TURBULENCE MODEL Hermilo RAMIREZ -LEON, Claude REY and Jean-Frangois SINI LABORATOIRE DE MECANIQUE DES...65 directly satisfied by an extended version of the C= F , ax6 aX5 artificial compressibility implicit method ( Ramirez -Leon et al,, 1991). 08 2 IR ap...the isotropization-of-production concept. For the compressible fluid case, Ramirez -Leon et al (1990) With regard to Eq (2), the right-hand side of

Methodologie de conception numerique d'un ventilateur helico-centrifuge basee sur l'emploi du calcul meridien

NASA Astrophysics Data System (ADS)

Lallier-Daniels, Dominic

La conception de ventilateurs est souvent basée sur une méthodologie « essais/erreurs » d'amélioration de géométries existantes ainsi que sur l'expérience de design et les résultats expérimentaux cumulés par les entreprises. Cependant, cette méthodologie peut se révéler coûteuse en cas d'échec; même en cas de succès, des améliorations significatives en performance sont souvent difficiles, voire impossibles à obtenir. Le projet présent propose le développement et la validation d'une méthodologie de conception basée sur l'emploi du calcul méridien pour la conception préliminaire de turbomachines hélico-centrifuges (ou flux-mixte) et l'utilisation du calcul numérique d'écoulement fluides (CFD) pour la conception détaillée. La méthode de calcul méridien à la base du processus de conception proposé est d'abord présentée. Dans un premier temps, le cadre théorique est développé. Le calcul méridien demeurant fondamentalement un processus itératif, le processus de calcul est également présenté, incluant les méthodes numériques de calcul employée pour la résolution des équations fondamentales. Une validation du code méridien écrit dans le cadre du projet de maîtrise face à un algorithme de calcul méridien développé par l'auteur de la méthode ainsi qu'à des résultats de simulation numérique sur un code commercial est également réalisée. La méthodologie de conception de turbomachines développée dans le cadre de l'étude est ensuite présentée sous la forme d'une étude de cas pour un ventilateur hélico-centrifuge basé sur des spécifications fournies par le partenaire industriel Venmar. La méthodologie se divise en trois étapes: le calcul méridien est employé pour le pré-dimensionnement, suivi de simulations 2D de grilles d'aubes pour la conception détaillée des pales et finalement d'une analyse numérique 3D pour la validation et l'optimisation fine de la géométrie. Les résultats de calcul méridien sont en outre comparés aux résultats de simulation pour la géométrie 3D afin de valider l'emploi du calcul méridien comme outil de prédimensionnement. Mots-clés Turbomachines hélico-centrifuges, Calcul méridien, Simulation numérique d'écoulement fluide, Conception numérique de turbomachines.

Egg white powder-stabilised multiple (water-in-olive oil-in-water) emulsions as beef fat replacers in model system meat emulsions.

PubMed

Öztürk, Burcu; Urgu, Müge; Serdaroğlu, Meltem

2017-05-01

Today, multiple emulsions are believed to have a considerable application potential in food industry. We aimed to investigate physical, chemical and textural quality characteristics of model system meat emulsions (MSME) in which beef fat (C) was totally replaced by 10% (E-10), 20% (E-20) or 30% (E-30) multiple emulsions (W 1 /O/W 2 ) prepared with olive oil and egg white powder (EWP). Incorporation of W 1 /O/W 2 emulsion resulted in reduced fat (from 11.54% to 4.01%), increased protein content (from 13.66% to 14.74%), and modified fatty acid composition, significantly increasing mono- and polyunsaturated fatty acid content and decreasing saturated fatty acid content. E-20 and E-30 samples had lower jelly and fat separation (5.77% and 5.25%) compared to C and E-10 (9.67% and 8.55%). W 1 /O/W 2 emulsion treatments had higher water-holding capacity (93.96-94.35%) than C samples (91.84%), and also showed the desired storage stability over time. Emulsion stability results showed that E-20 and E-30 samples had lower total expressible fluid (14.05% and 14.53%) and lower total expressible fat (5.06% and 5.33%) compared to C samples (19.13% and 6.09%). Increased concentrations of W 1 /O/W 2 emulsions led to alterations in colour and texture parameters. TBA values of samples were lower in W 1 /O/W 2 emulsion treatments than control treatment during 60 days of storage. Our results indicated that multiple emulsions prepared with olive oil and EWP had promising impacts on reducing fat, modifying the lipid composition and developing both technologically and oxidatively stable meat systems. These are the first findings concerning beef matrix fat replacement with multiple emulsions stabilised by EWP. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Rotation of a rigid satellite with a fluid component: a new light onto Titan's obliquity

NASA Astrophysics Data System (ADS)

Boué, Gwenaël; Rambaux, Nicolas; Richard, Andy

2017-12-01

We revisit the rotation dynamics of a rigid satellite with either a liquid core or a global subsurface ocean. In both problems, the flow of the fluid component is assumed inviscid. The study of a hollow satellite with a liquid core is based on the Poincaré-Hough model which provides exact equations of motion. We introduce an approximation when the ellipticity of the cavity is low. This simplification allows to model both types of satellite in the same manner. The analysis of their rotation is done in a non-canonical Hamiltonian formalism closely related to Poincaré's "forme nouvelle des équations de la mécanique". In the case of a satellite with a global ocean, we obtain a seven-degree-of-freedom system. Six of them account for the motion of the two rigid components, and the last one is associated with the fluid layer. We apply our model to Titan for which the origin of the obliquity is still a debated question. We show that the observed value is compatible with Titan slightly departing from the hydrostatic equilibrium and being in a Cassini equilibrium state.

Les électrolytes du sang et des sécrétions endométriales de la vache à la suite d'une glucocorticothérapie

PubMed Central

Ibrahim, M.; Guay, P.; Lamothe, P.

1972-01-01

The effect of two synthetic glucocorticoids, 9α-fluoroprednisolone acetate and dexamethasone (9α-fluoro, 16α-methylprednisolone) was studied on 12 normally breeding cows. Na, Mg, K, Ca and P concentrations were evaluated in the serum and in the uterine fluid at four stages of the estrous cycle. No significant changes were noted in Na and Ca concentration in either serum or uterine fluid. On the other hand, significant changes in the Mg, K and P were observed. Both drugs have caused a decrease in the content of Mg in the serum (P<0.05) during diestrus, a fall in the level of uterine K (P<0.01) during proestrus and a decrease of P during proestrus both in serum (P<0.001 after dexamethasone treatment) and in uterine fluid (P<0.001 for both drugs). It is obvious that the two drugs change the chemical composition of blood and endometrial secretions. This could jeopardize the survival of the spermatozoids and of the ovum as well as the fertilization and the implantation processes. PMID:4259930

La mécanique des fluides à la Sorbonne entre les deux guerres

NASA Astrophysics Data System (ADS)

Fontanon, Claudine

2017-08-01

World War I opened the way to a restructuring of research in the field of aviation sciences in France as abroad. Technical advances were made possible under the impulse of a new science: aerodynamics, notably owing to Gustave Eiffel's works. Nevertheless, the experimental approach that most marked this foundational period was replaced, after the Great War, with a much more theoretical approach of aerodynamic phenomena. And it is under the name ;fluid mechanics; that both theoretical and experimental approaches were gathered together to constitute, with classical hydrodynamics, the basis of teaching and university research at the Faculty of Sciences in Paris. The patronage era that had anchored aeronautical teaching and research to the Faculty of Sciences in Paris was succeeded by an era when the government authorities directly intervened to institutionalize fluid mechanics and orientate it toward applications to aviation. In this article, we will analyse the steps and modalities of the emergence of this science, with the aim to determine how much the scientific policy deployed between the two wars by the public authorities influenced the evolution and the progress of aeronautical techniques, and met the expectations of its promoters.

Suspensions on the basis of stabilised zirconium oxide for three-dimensional printing

NASA Astrophysics Data System (ADS)

Sokolov, P. S.; Komissarenko, D. A.; Shmeleva, I. A.; Slyusar, I. V.; Dosovitskiy, G. A.; Evdokimov, P. V.; Putlyaev, V. I.; Dosovitskiy, A. E.

2018-04-01

Present work considers the first results on rheological and photo-curing behaviour of suspension consisting of nanocrystalline stabilised zirconium dioxide powders (19 - 27 vol. %) and a liquid UV-photosensitive organic monomer. At ambient temperature compositions showed a viscosity of 2.5 and 0.8 Pa×s at 10 and 100 s-1 shear rates, respectively. Printability of these compositions was subsequently investigated by using an stereolithography machine Ember (Autodesk). 3D objects were later sintered in a separate furnace into dense translucent ZrO2 ceramics.

Continuous inhaled iloprost in a neonate with d-transposition of the great arteries and severe pulmonary arterial hypertension.

PubMed

Dykes, John C; Torres, Marilyn; Alexander, Plato J

2016-03-01

This report describes the case of a neonate with d-transposition of the great arteries and severe pulmonary arterial hypertension stabilised in the post-operative period with continuous iloprost nebulisation. To our knowledge, this is the first documented method of treating post-operative severe pulmonary arterial hypertension with continuous inhaled iloprost in a patient with complex CHD. We found this method of delivering the drug very effective in stabilising haemodynamic swings in the setting of severe pulmonary arterial hypertension.

Colorimetric Detection Based on Localised Surface Plasmon Resonance Optical Characteristics for the Detection of Hydrogen Peroxide Using Acacia Gum–Stabilised Silver Nanoparticles

PubMed Central

Alzahrani, Eman

2017-01-01

The use of nanoparticles in sensing is attracting the interest of many researchers. The aim of this work was to fabricate Acacia gum–stabilised silver nanoparticles (SNPs) using green chemistry to use them as a highly sensitive and cost-effective localised surface plasmon resonance (LSPR) colorimeter sensor for the determination of reactive oxygen species, such as hydrogen peroxide (H2O2). Silver nanoparticles were fabricated by the reduction of an inorganic precursor silver nitrate solution (AgNO3) using white sugar as the reducing reagent and Acacia gum as the stabilising reagent and a sonication bath to form uniform silver nanoparticles. The fabricated nanoparticles were characterised by visual observation, ultraviolet-visible (UV-Vis) spectrophotometry, transmission electron microscopy (TEM) analysis, energy-dispersive X-ray spectroscopy (EDAX), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FT-IR). The TEM micrographs of the synthesised nanoparticles showed the presence of spherical nanoparticles with sizes of approximately 10 nm. The EDAX spectrum result confirmed the presence of silver (58%), carbon (30%), and oxygen (12%). Plasmon colorimetric sensing of H2O2 solution was investigated by introducing H2O2 solution into Acacia gum–capped SNP dispersion, and the change in the LSPR band in the UV-Vis region of spectra was monitored. In this study, it was found that the yellow colour of Acacia gum–stabilised SNPs gradually changed to transparent, and moreover, a remarkable change in the LSPR absorbance strength was observed. The calibration curve was linear over 0.1–0.00001 M H2O2, with a correlation estimation (R2) of .953. This was due to the aggregation of SNPs following introduction of the H2O2 solution. Furthermore, the fabricated SNPs were successfully used to detect H2O2 solution in a liquid milk sample, thereby demonstrating the ability of the fabricated SNPs to detect H2O2 solution in liquid milk samples. This work showed that Acacia gum–stabilised SNPs may have the potential as a colour indicator in medical and environmental applications. PMID:28469405

Environmental Controls and Eco-geomorphic Interactions of the Barchan-to-parabolic Dune Stabilisation and the Parabolic-to-barchan Dune Reactivation

NASA Astrophysics Data System (ADS)

Yan, Na; Baas, Andreas

2015-04-01

Parabolic dunes are one of a few common aeolian landforms which are highly controlled by eco-geomorphic interactions. Parabolic dunes, on the one hand, can be developed from highly mobile dune landforms, barchans for instance, in an ameliorated vegetation condition; or on the other hand, they can be reactivated and transformed back into mobile dunes due to vegetation deterioration. The fundamental mechanisms and eco-geomorphic interactions controlling both dune transformations remain poorly understood. To bridge the gap between complex processes involved in dune transformations on a relatively long temporal scale and real world monitoring records on a very limited temporal scale, this research has extended the DECAL model to incorporate 'dynamic' growth functions and the different 'growth' of perennial shrubs between growing and non-growing seasons, informed by field measurements and remote sensing analysis, to explore environmental controls and eco-geomorphic interactions of both types of dune transformation. A non-dimensional 'dune stabilising index' is proposed to capture the interactions between environmental controls (i.e. the capabilities of vegetation to withstand wind erosion and sand burial, the sandy substratum thickness, the height of the initial dune, and the sand transport potential), and establish the linkage between these controls and the geometry of a stabilising dune. An example demonstrates how to use the power-law relationship between the dune stabilising index and the normalised migration distance to assist in extrapolating the historical trajectories of transforming dunes. The modelling results also show that a slight increase in vegetation cover of an initial parabolic dune can significantly increase the reactivation threshold of climatic impact (both drought stress and wind strength) required to reactivate a stabilising parabolic dune into a barchan. Four eco-geomorphic interaction zones that govern a barchan-to-parabolic dune transformation and a parabolic-to-barchan dune transformation have been identified. These zones exhibit different characteristics and dynamics that are sensitive to changes in environmental forces, and can be potentially used as a proxy to monitor the mobility of a dune system.

Performance of parasitological and molecular techniques for the diagnosis and surveillance of gambiense sleeping sickness.

PubMed

Mumba Ngoyi, Dieudonné; Ali Ekangu, Rosine; Mumvemba Kodi, Marie France; Pyana, Patient Pati; Balharbi, Fatima; Decq, Mélanie; Kande Betu, Victor; Van der Veken, Wim; Sese, Claude; Menten, Joris; Büscher, Philippe; Lejon, Veerle

2014-06-01

Recently, improvements have been made to diagnostics for gambiense sleeping sickness control but their performance remains poorly documented and may depend on specimen processing prior to examination. In a prospective study in the Democratic Republic of the Congo, we compared the diagnostic performance of several parasite detection techniques, immune trypanolysis and of m18S PCR on whole blood stored in a stabilisation buffer or dried on filter paper. Individuals with CATT whole blood (WB) titer ≥1∶4 or with clinical signs indicative for sleeping sickness were examined for presence of trypanosomes in lymph node aspirate (LNA) and/or in blood. Blood was examined with Capillary Centrifugation Technique (CTC), mini-Anion Exchange Centrifugation Technique (mAECT) and mAECT on buffy coat (BC). PCR was performed on whole blood (i) stored in guanidine hydrochloride EDTA (GE) stabilisation buffer and (ii) dried on filter paper, and repeatability and reproducibility were assessed. Immune trypanolysis (TL) was performed on plasma. A total of 237 persons were included. Among 143 parasitologically confirmed cases, 85.3% had a CATT-WB titre of ≥1/8, 39.2% were positive in LNA, 47.5% in CTC, 80.4% in mAECT-WB, 90.9% in mAECT-BC, 95.1% in TL and up to 89.5% in PCR on GE-stabilised blood. PCR on GE-stabilised blood showed highest repeatability (87.8%) and inter-laboratory reproducibility (86.9%). Of the 94 non-confirmed suspects, respectively 39.4% and 23.4% were TL or PCR positive. Suboptimal specificity of PCR and TL was also suggested by latent class analysis. The combination of LNA examination with mAECT-BC offered excellent diagnostic sensitivity. For PCR, storage of blood in stabilisation buffer is to be preferred over filter paper. TL as well as PCR are useful for remote diagnosis but are not more sensitive than mAECT-BC. For TL and PCR, the specificity, and thus usefulness for management of non-confirmed suspects remain to be determined.

Performance of Parasitological and Molecular Techniques for the Diagnosis and Surveillance of Gambiense Sleeping Sickness

PubMed Central

Mumba Ngoyi, Dieudonné; Ali Ekangu, Rosine; Mumvemba Kodi, Marie France; Pyana, Patient Pati; Balharbi, Fatima; Decq, Mélanie; Kande Betu, Victor; Van der Veken, Wim; Sese, Claude; Menten, Joris; Büscher, Philippe; Lejon, Veerle

2014-01-01

Objectives Recently, improvements have been made to diagnostics for gambiense sleeping sickness control but their performance remains poorly documented and may depend on specimen processing prior to examination. In a prospective study in the Democratic Republic of the Congo, we compared the diagnostic performance of several parasite detection techniques, immune trypanolysis and of m18S PCR on whole blood stored in a stabilisation buffer or dried on filter paper. Methods Individuals with CATT whole blood (WB) titer ≥1∶4 or with clinical signs indicative for sleeping sickness were examined for presence of trypanosomes in lymph node aspirate (LNA) and/or in blood. Blood was examined with Capillary Centrifugation Technique (CTC), mini-Anion Exchange Centrifugation Technique (mAECT) and mAECT on buffy coat (BC). PCR was performed on whole blood (i) stored in guanidine hydrochloride EDTA (GE) stabilisation buffer and (ii) dried on filter paper, and repeatability and reproducibility were assessed. Immune trypanolysis (TL) was performed on plasma. Results A total of 237 persons were included. Among 143 parasitologically confirmed cases, 85.3% had a CATT-WB titre of ≥1/8, 39.2% were positive in LNA, 47.5% in CTC, 80.4% in mAECT-WB, 90.9% in mAECT-BC, 95.1% in TL and up to 89.5% in PCR on GE-stabilised blood. PCR on GE-stabilised blood showed highest repeatability (87.8%) and inter-laboratory reproducibility (86.9%). Of the 94 non-confirmed suspects, respectively 39.4% and 23.4% were TL or PCR positive. Suboptimal specificity of PCR and TL was also suggested by latent class analysis. Conclusion The combination of LNA examination with mAECT-BC offered excellent diagnostic sensitivity. For PCR, storage of blood in stabilisation buffer is to be preferred over filter paper. TL as well as PCR are useful for remote diagnosis but are not more sensitive than mAECT-BC. For TL and PCR, the specificity, and thus usefulness for management of non-confirmed suspects remain to be determined. PMID:24921941

Similar early migration when comparing CR and PS in Triathlon™ TKA: A prospective randomised RSA trial.

PubMed

Molt, Mats; Toksvig-Larsen, Sören

2014-10-01

The objective of this study was to compare the early migration of the cruciate retaining and posterior stabilising versions of the recently introduced Triathlon™ total knee system, with a view to predicting long term fixation performance. Sixty patients were prospectively randomised to receive either Triathlon™ posterior stabilised cemented knee prosthesis or Triathlon™ cruciate retaining cemented knee prosthesis. Tibial component migration was measured by radiostereometric analysis postoperatively and at three months, one year and two years. Clinical outcome was measured by the American Knee Society Score and Knee Osteoarthritis and Injury Outcome Score. There were no differences in rotation around the three coordinal axes or in the maximum total point motion (MTPM) during the two year follow-up. The posterior stabilised prosthesis had more posterior-anterior translation at three months and one year and more caudal-cranial translation at one year and two years. There were no differences in functional outcome between the groups. The tibial tray of the Triathlon™ cemented knee prosthesis showed similar early stability. Level I. Article focus: This was a prospective randomised trial aiming to compare the single radius posterior stabilised (PS) Triathlon™ total knee arthroplasty (TKA) to the cruciate retaining Triathlon™ TKA system with regard to fixation. Strengths and limitations of this study: Strength of this study was that it is a randomised prospective trial using an objective measuring tool. The sample size of 25-30 patients was reportedly sufficient for the screening of implants using RSA [1]. ClinicalTrials.gov Identifier: NCT00436982. Copyright © 2014 Elsevier B.V. All rights reserved.

Oil-in-oil emulsions stabilised solely by solid particles.

PubMed

Binks, Bernard P; Tyowua, Andrew T

2016-01-21

A brief review of the stabilisation of emulsions of two immiscible oils is given. We then describe the use of fumed silica particles coated with either hydrocarbon or fluorocarbon groups in acting as sole stabilisers of emulsions of various vegetable oils with linear silicone oils (PDMS) of different viscosity. Transitional phase inversion of emulsions, containing equal volumes of the two oils, from silicone-in-vegetable (S/V) to vegetable-in-silicone (V/S) occurs upon increasing the hydrophobicity of the particles. Close to inversion, emulsions are stable to coalescence and gravity-induced separation for at least one year. Increasing the viscosity of the silicone oil enables stable S/V emulsions to be prepared even with relatively hydrophilic particles. Predictions of emulsion type from calculated contact angles of a silica particle at the oil-oil interface are in agreement with experiment provided a small polar contribution to the surface energy of the oils is included. We also show that stable multiple emulsions of V/S/V can be prepared in a two-step procedure using two particle types of different hydrophobicity. At fixed particle concentration, catastrophic phase inversion of emulsions from V/S to S/V can be effected by increasing the volume fraction of vegetable oil. Finally, in the case of sunflower oil + 20 cS PDMS, the study is extended to particles other than silica which differ in chemical type, particle size and particle shape. Consistent with the above findings, we find that only sufficiently hydrophobic particles (clay, zinc oxide, silicone, calcium carbonate) can act as efficient V/S emulsion stabilisers.

Management of rib fractures in traumatic flail chest: a meta-analysis of randomised controlled trials.

PubMed

Coughlin, T A; Ng, J W G; Rollins, K E; Forward, D P; Ollivere, B J

2016-08-01

Flail chest from a blunt injury to the thorax is associated with significant morbidity and mortality. Its management globally is predominantly non-operative; however, there are an increasing number of centres which undertake surgical stabilisation. The aim of this meta-analysis was to compare the efficacy of this approach with that of non-operative management. A systematic search of the literature was carried out to identify randomised controlled trials (RCTs) which compared the clinical outcome of patients with a traumatic flail chest treated by surgical stabilisation of any kind with that of non-operative management. Of 1273 papers identified, three RCTs reported the results of 123 patients with a flail chest. Surgical stabilisation was associated with a two thirds reduction in the incidence of pneumonia when compared with non-operative management (risk ratio 0.36, 95% confidence interval (CI) 0.15 to 0.85, p = 0.02). The duration of mechanical ventilation (mean difference -6.30 days, 95% CI -12.16 to -0.43, p = 0.04) and length of stay in an intensive care unit (mean difference -6.46 days, 95% CI 9.73 to -3.19, p = 0.0001) were significantly shorter in the operative group, as was the overall length of stay in hospital (mean difference -11.39, 95% CI -12.39 to -10.38, p < 0.0001). Surgical stabilisation for a traumatic flail chest is associated with significant clinical benefits in this meta-analysis of three relatively small RCTs. Cite this article: Bone Joint J 2016;98-B:1119-25. ©2016 The British Editorial Society of Bone & Joint Surgery.

Strength and Stiffness Development in Soft Soils: A FESEM aided Soil Microstructure Viewpoint

NASA Astrophysics Data System (ADS)

Wijeyesekera, D. C.; Ho, M. H.; Bai, X.; Bakar, I.

2016-07-01

This paper opens with an overview of the debatable definition of soft soil that goes beyond a (CH) organic / inorganic clay and OH peat to include weakly cemented periglacial deposits of loess and alike. It then outlines the findings obtained from stiffness test on cement-stabilised soft clay. The findings are complemented with a microstructure viewpoint obtained using field emission scanning electron microscope (FESEM). Research also comprised of making cylindrical stabilised clay samples, prepared in the laboratory with various rubber chips contents and cement, and then aged for 28 days. The samples were then subjected to unconfined compressive strength (UCS) test and observations were also made of its microstructure using the FESEM. The impact of the soil microstructure on the stiffness result was studied both with the stabilized soil and also of some of the natural undisturbed loess soils. Sustainability aspect and the potential of the use of rubber chips and sand as additives to cement stabilisation are also discussed. The overall test results indicated that rubber chips and sand contributed to the improvement in unconfined compressive strength (qu). The derogatory influence of moisture on the stiffness of the stabilised clay was studied simultaneously. SEM micrographs are presented that show bonding of cement, rubber chips/ sand and soft clay, granular units and aggregated / agglomerated units in loess. The paper concludes with observations on the dependence of soil microstructure on the soil strength and deformability and even collapsibility of the loess. Current practices adopted as engineering solutions to these challenging soils are outlined.

Stability of colloidal silver nanoparticles trapped in lipid bilayer: effect of lecithin concentration and applied temperature.

PubMed

Barani, Hossein; Montazer, Majid; Braun, Hans-Georg; Dutschk, Victoria

2014-12-01

The use of silver nanoparticle on various substrates has been widespread because of its good antibacterial properties that directly depend on the stability of the silver nanoparticles in a colloidal suspension. In this study, the colloidal solutions of the silver nanoparticles were synthesised by a simple and safe method by using lecithin as a stabilising agent and their stability was examined at various temperatures. The effect of the lecithin concentrations on the stability of the synthesised silver nanoparticles was examined from 25 to 80°C at 5°C intervals, by recording the changes in the UV-vis absorption spectra, the hydrodynamic diameter and the light scattering intensity of the silver nanoparticles. In addition, the morphology of the synthesised silver nanoparticles was investigated with the low-voltage scanning electron microscopy and transmission electron microscopy. The results indicated that increasing temperature caused different changes in the size of the stabilised and the unstabilised silver nanoparticles. The size of the stabilised silver nanoparticles reduced from 38 to 36 nm during increasing temperature, which confirmed good stability.

Stabilised DNA secondary structures with increasing transcription localise hypermutable bases for somatic hypermutation in IGHV3-23.

PubMed

Duvvuri, Bhargavi; Duvvuri, Venkata R; Wu, Jianhong; Wu, Gillian E

2012-07-01

Somatic hypermutation (SHM) mediated by activation-induced cytidine deaminase (AID) is a transcription-coupled mechanism most responsible for generating high affinity antibodies. An issue remaining enigmatic in SHM is how AID is preferentially targeted during transcription to hypermutable bases in its substrates (WRC motifs) on both DNA strands. AID targets only single stranded DNA. By modelling the dynamical behaviour of IGHV3-23 DNA, a commonly used human variable gene segment, we observed that hypermutable bases on the non-transcribed strand are paired whereas those on transcribed strand are mostly unpaired. Hypermutable bases (both paired and unpaired) are made accessible to AID in stabilised secondary structures formed with increasing transcription levels. This observation provides a rationale for the hypermutable bases on both the strands of DNA being targeted to a similar extent despite having differences in unpairedness. We propose that increasing transcription and RNAP II stalling resulting in the formation and stabilisation of stem-loop structures with AID hotspots in negatively supercoiled region can localise the hypermutable bases of both strands of DNA, to AID-mediated SHM.

A detached eddy simulation model for the study of lateral separation zones along a large canyon-bound river

NASA Astrophysics Data System (ADS)

Alvarez, Laura V.; Schmeeckle, Mark W.; Grams, Paul E.

2017-01-01

Lateral flow separation occurs in rivers where banks exhibit strong curvature. In canyon-bound rivers, lateral recirculation zones are the principal storage of fine-sediment deposits. A parallelized, three-dimensional, turbulence-resolving model was developed to study the flow structures along lateral separation zones located in two pools along the Colorado River in Marble Canyon. The model employs the detached eddy simulation (DES) technique, which resolves turbulence structures larger than the grid spacing in the interior of the flow. The DES-3D model is validated using Acoustic Doppler Current Profiler flow measurements taken during the 2008 controlled flood release from Glen Canyon Dam. A point-to-point validation using a number of skill metrics, often employed in hydrological research, is proposed here for fluvial modeling. The validation results show predictive capabilities of the DES model. The model reproduces the pattern and magnitude of the velocity in the lateral recirculation zone, including the size and position of the primary and secondary eddy cells, and return current. The lateral recirculation zone is open, having continuous import of fluid upstream of the point of reattachment and export by the recirculation return current downstream of the point of separation. Differences in magnitude and direction of near-bed and near-surface velocity vectors are found, resulting in an inward vertical spiral. Interaction between the recirculation return current and the main flow is dynamic, with large temporal changes in flow direction and magnitude. Turbulence structures with a predominately vertical axis of vorticity are observed in the shear layer becoming three-dimensional without preferred orientation downstream.

Global Asymptotic Behavior of Iterative Implicit Schemes

NASA Technical Reports Server (NTRS)

Yee, H. C.; Sweby, P. K.

1994-01-01

The global asymptotic nonlinear behavior of some standard iterative procedures in solving nonlinear systems of algebraic equations arising from four implicit linear multistep methods (LMMs) in discretizing three models of 2 x 2 systems of first-order autonomous nonlinear ordinary differential equations (ODEs) is analyzed using the theory of dynamical systems. The iterative procedures include simple iteration and full and modified Newton iterations. The results are compared with standard Runge-Kutta explicit methods, a noniterative implicit procedure, and the Newton method of solving the steady part of the ODEs. Studies showed that aside from exhibiting spurious asymptotes, all of the four implicit LMMs can change the type and stability of the steady states of the differential equations (DEs). They also exhibit a drastic distortion but less shrinkage of the basin of attraction of the true solution than standard nonLMM explicit methods. The simple iteration procedure exhibits behavior which is similar to standard nonLMM explicit methods except that spurious steady-state numerical solutions cannot occur. The numerical basins of attraction of the noniterative implicit procedure mimic more closely the basins of attraction of the DEs and are more efficient than the three iterative implicit procedures for the four implicit LMMs. Contrary to popular belief, the initial data using the Newton method of solving the steady part of the DEs may not have to be close to the exact steady state for convergence. These results can be used as an explanation for possible causes and cures of slow convergence and nonconvergence of steady-state numerical solutions when using an implicit LMM time-dependent approach in computational fluid dynamics.

Lyapunov vector function method in the motion stabilisation problem for nonholonomic mobile robot

NASA Astrophysics Data System (ADS)

Andreev, Aleksandr; Peregudova, Olga

2017-07-01

In this paper we propose a sampled-data control law in the stabilisation problem of nonstationary motion of nonholonomic mobile robot. We assume that the robot moves on a horizontal surface without slipping. The dynamical model of a mobile robot is considered. The robot has one front free wheel and two rear wheels which are controlled by two independent electric motors. We assume that the controls are piecewise constant signals. Controller design relies on the backstepping procedure with the use of Lyapunov vector-function method. Theoretical considerations are verified by numerical simulation.

Functional liquid structures by emulsification of graphene and other two-dimensional nanomaterials.

PubMed

Large, Matthew J; Ogilvie, Sean P; Meloni, Manuela; Amorim Graf, Aline; Fratta, Giuseppe; Salvage, Jonathan; King, Alice A K; Dalton, Alan B

2018-01-25

Pickering emulsions stabilised with nanomaterials provide routes to a range of functional macroscopic assemblies. We demonstrate the formation and properties of water-in-oil emulsions prepared through liquid-phase exfoliation of graphene. Due to the functional nature of the stabiliser, the emulsions exhibit conductivity due to inter-particle tunnelling. We demonstrate a strain sensing application with a large gauge factor of ∼40; the highest reported in a liquid. Our methodology can be applied to other two-dimensional layered materials opening up applications such as energy storage materials, and flexible and printable electronics.

Ash storms: impacts of wind-remobilised volcanic ash on rural communities and agriculture following the 1991 Hudson eruption, southern Patagonia, Chile

NASA Astrophysics Data System (ADS)

Wilson, T. M.; Cole, J. W.; Stewart, C.; Cronin, S. J.; Johnston, D. M.

2011-04-01

Tephra fall from the August 1991 eruption of Volcán Hudson affected some 100,000 km2 of Patagonia and was almost immediately reworked by strong winds, creating billowing clouds of remobilised ash, or `ash storms'. The immediate impacts on agriculture and rural communities were severe, but were then greatly exacerbated by continuing ash storms. This paper describes the findings of a 3-week study tour of the diverse environments of southern Patagonia affected by ash storms, with an emphasis on determining the impacts of repeated ash storms on agriculture and local practices that were developed in an attempt to mitigate these impacts. Ash storms produce similar effects to initial tephra eruptions, prolonged for considerable periods. These have included the burial of farmland under dune deposits, abrasion of vegetation and contamination of feed supplies with fine ash. These impacts can then cause problems for grazing animals such as starvation, severe tooth abrasion, gastrointestinal problems, corneal abrasion and blindness, and exhaustion if sheep fleeces become laden with ash. In addition, ash storms have led to exacerbated soil erosion, human health impacts, increased cleanup requirements, sedimentation in irrigation canals, and disruption of aviation and land transport. Ash deposits were naturally stabilised most rapidly in areas with high rainfall (>1,500 mm/year) through compaction and enhanced vegetation growth. Stabilisation was slowest in windy, semi-arid regions. Destruction of vegetation and suppression of regrowth by heavy tephra fall (>100 mm) hindered the stabilisation of deposits for years, and reduced the surface friction which increased wind erosivity. Stabilisation of tephra deposits was improved by intensive tillage, use of windbreaks and where there was dense and taller vegetative cover. Long-term drought and the impracticality of mixing ash deposits with soil by tillage on large farms was a barrier to stabilising deposits and, in turn, agricultural recovery. The continuing ash storms motivated the partial evacuation of small rural towns such as Chile Chico (Chile) and Los Antiguos (Argentina) in September-December 1991, after the primary tephra fall in August 1991. Greatly increased municipal cleanup efforts had to be sustained beyond the initial tephra fall to cope with the ongoing impacts of ash storms. Throughout the 1990s, ash storms contributed to continued population migration out of the affected area, leaving hundreds of farms abandoned on the Argentine steppe. The major lesson from our study is the importance of stabilisation of ash deposits as soon as possible after the initial eruption, particularly in windy, arid climates. Suggested mitigation measures include deep cultivation of the ash into the soil and erecting windbreaks.

Unsteady Aerodynamics - Fundamentals and Applications of Aircraft Dynamics. Conference Proceedings of the Joint Symposium of the Fluid Dynamics and Flight Mechanics Panels Held in Goettingen, Federal Republic of Germany on 6-9 May 1985.

DTIC Science & Technology

1985-11-01

tourbillons daxe perpendicu-V laire A l’fcoulement principal) issu d’un profil occillant en Tamis dan;, do,, condition,, dn dorochagp dynamique. 5_10...a~rodyna- - mique sur R. A partir de cette analyse experimentale, une tentative de modelisation th~sorique des effets non *lin~ laires observes aux...cisaillement A la paroi d’un profil d’aile anim6 d’un mouvament harmonique parall~le ou parpandicu- laire A 1𔄀coulement non perturb~s", EUROMECH

Potentiel des méthodes de séparation et stockage du CO2 dans la lutte contre l'effet de serreThe role of CO2 capture and sequestration in mitigation of climate change

NASA Astrophysics Data System (ADS)

Jean-Baptiste, Philippe; Ducroux, René

2003-06-01

Increasing atmospheric level of greenhouse gases are causing global warming and putting at risk the global climate system. The main anthropogenic greenhouse gas is CO 2. Technical solutions exist to reduce CO 2 emission and stabilise atmospheric CO 2 concentration, including energy saving and energy efficiency, switch to lower carbon content fuels like natural gas and to energy sources that operate with zero CO 2 emissions such as renewable or nuclear energy, enhance the natural sinks for CO 2 (forests, soils, etc.), and last but not least, sequester CO 2 from fossil fuels combustion. The purpose of this paper is to provide an overview of the technology and cost for capture and storage of CO 2. Some of the factors that will influence application, including environmental impact, cost and efficiency, are also discussed. Capturing CO 2 and storing it in underground geological reservoirs appears as the best environmentally acceptable option. It can be done with existing technology; however, substantial R&D is needed to improve available technology and to lower the cost. Applicable to large CO 2 emitting industrial facilities such as power plants, cement factories, steel industry, etc., which amount to more than 30% of the global anthropogenic CO 2 emission, it represents a valuable tool in the battle against global warming. To cite this article: P. Jean-Baptiste, R. Ducroux, C. R. Geoscience 335 (2003).

Unstructured CFD Aerodynamic Analysis of a Generic UCAV Configuration

NASA Technical Reports Server (NTRS)

Frink, Neal T.; Tormalm, Magnus; Schmidt, Stefan

2011-01-01

Three independent studies from the United States (NASA), Sweden (FOI), and Australia (DSTO) are analyzed to assess the state of current unstructured-grid computational fluid dynamic tools and practices for predicting the complex static and dynamic aerodynamic and stability characteristics of a generic 53-degree swept, round-leading-edge uninhabited combat air vehicle configuration, called SACCON. NASA exercised the USM3D tetrahedral cell-centered flow solver, while FOI and DSTO applied the FOI/EDGE general-cell vertex-based solver. The authors primarily employ the Reynolds Averaged Navier-Stokes (RANS) assumption, with a limited assessment of the EDGE Detached Eddy Simulation (DES) extension, to explore sensitivities to grids and turbulence models. Correlations with experimental data are provided for force and moments, surface pressure, and off-body flow measurements. The vortical flow field over SACCON proved extremely difficult to model adequately. As a general rule, the prospect of obtaining reasonable correlations of SACCON pitching moment characteristics with the RANS formulation is not promising, even for static cases. Yet, dynamic pitch oscillation results seem to produce a promising characterization of shapes for the lift and pitching moment hysteresis curves. Future studies of this configuration should include more investigation with higher-fidelity turbulence models, such as DES.

Directed collective motion of bacteria under channel confinement

NASA Astrophysics Data System (ADS)

Wioland, H.; Lushi, E.; Goldstein, R. E.

2016-07-01

Dense suspensions of swimming bacteria are known to exhibit collective behaviour arising from the interplay of steric and hydrodynamic interactions. Unconfined suspensions exhibit transient, recurring vortices and jets, whereas those confined in circular domains may exhibit order in the form of a spiral vortex. Here we show that confinement into a long and narrow macroscopic ‘racetrack’ geometry stabilises bacterial motion to form a steady unidirectional circulation. This motion is reproduced in simulations of discrete swimmers that reveal the crucial role that bacteria-driven fluid flows play in the dynamics. In particular, cells close to the channel wall produce strong flows which advect cells in the bulk against their swimming direction. We examine in detail the transition from a disordered state to persistent directed motion as a function of the channel width, and show that the width at the crossover point is comparable to the typical correlation length of swirls seen in the unbounded system. Our results shed light on the mechanisms driving the collective behaviour of bacteria and other active matter systems, and stress the importance of the ubiquitous boundaries found in natural habitats.

Pressure fluctuations and time scales in turbulent channel flow

NASA Astrophysics Data System (ADS)

Septham, Kamthon; Morrison, Jonathan; Diwan, Sourabh

2015-11-01

Pressure fluctuations in turbulent channel flow subjected to globally stabilising linear feedback control are investigated at Reτ = 400 . The passivity-based control is adopted and explained by the conservative characteristics of the nonlinear terms contributing to the Reynolds-Orr equation (Sharma et al. Phys. Fluids 2011). The linear control operates via vU' ; the maximum forcing is located at y+ ~ 20 , corresponding to the location of the maximum in the mean-square pressure gradient. The responses of the rapid (linear) and slow (nonlinear) pressure fluctuations to the linear control are investigated using the Green's function representations. It demonstrates that the linear control operates via the linear source terms of the Poisson equation for pressure fluctuations. Landahl's timescales of the minimal flow unit (MFU) in turbulent channel flow are examined at y+ = 20 . It shows that the timescales of MFU agree well with the theoretical values proposed by Landahl (1993). Therefore, the effectiveness of the linear control to attenuate wall turbulence is explained by Landahl's theory for timescales, in that the control proceeds via the shear interaction timescale which is significantly shorter than both the nonlinear and viscous timescales.

Application of Electrokinetic Stabilisation (EKS) Method for Soft Soil: A Review

NASA Astrophysics Data System (ADS)

Azhar, ATS; Azim, MAM; Syakeera, NN; Jefferson, IF; Rogers, CDF

2017-08-01

Soil properties such as low shear strength, excessive compression, collapsing behavior, high swell potential are some of the undesirable properties of soils in geotechnical engineering and those properties would cause severe distress to the structures. To solve these, an innovative stabilization of Electrokinetic (EKS) has been introduced. Electrokinetic is an applicable technique to transport charged particles and fluid in an electric potential. The EKS demonstrates changes in soil pH due to electrolysis reactions, water flow between the electrodes and migration of ions towards the cathode. This treatment has proven its efficiency in consolidating organic, peat and clayey silt as well as less expensive than other methods. Otherwise, this method also gives advantage by not disturbing site. The primary objective of this review is to discuss the application of electrokinetic and to investigate the current knowledge of electrokinetic in geotechnical application through a literature search and review, including consideration of certain aspects related to the soft soil application that may be relevant to the future study and at the same time addressing some key issues and their implications on soil behaviors.

The effect of non-Newtonian viscosity on the stability of the Blasius boundary layer

NASA Astrophysics Data System (ADS)

Griffiths, P. T.; Gallagher, M. T.; Stephen, S. O.

2016-07-01

We consider, for the first time, the stability of the non-Newtonian boundary layer flow over a flat plate. Shear-thinning and shear-thickening flows are modelled using a Carreau constitutive viscosity relationship. The boundary layer equations are solved in a self-similar fashion. A linear asymptotic stability analysis, that concerns the lower-branch structure of the neutral curve, is presented in the limit of large Reynolds number. It is shown that the lower-branch mode is destabilised and stabilised for shear-thinning and shear-thickening fluids, respectively. Favourable agreement is obtained between these asymptotic predictions and numerical results obtained from an equivalent Orr-Sommerfeld type analysis. Our results indicate that an increase in shear-thinning has the effect of significantly reducing the value of the critical Reynolds number, this suggests that the onset of instability will be significantly advanced in this case. This postulation, that shear-thinning destabilises the boundary layer flow, is further supported by our calculations regarding the development of the streamwise eigenfunctions and the relative magnitude of the temporal growth rates.

Volitional control of anticipatory ocular pursuit responses under stabilised image conditions in humans.

PubMed

Barnes, G; Goodbody, S; Collins, S

1995-01-01

Ocular pursuit responses have been examined in humans in three experiments in which the pursuit target image has been fully or partially stabilised on the fovea by feeding a recorded eye movement signal back to drive the target motion. The objective was to establish whether subjects could volitionally control smooth eye movement to reproduce trajectories of target motion in the absence of a concurrent target motion stimulus. In experiment 1 subjects were presented with a target moving with a triangular waveform in the horizontal axis with a frequency of 0.325 Hz and velocities of +/- 10-50 degrees/s. The target was illuminated twice per cycle for pulse durations (PD) of 160-640 ms as it passed through the centre position; otherwise subjects were in darkness. Subjects initially tracked the target motion in a conventional closed-loop mode for four cycles. Prior to the next target presentation the target image was stabilised on the fovea, so that any target motion generated resulted solely from volitional eye movement. Subjects continued to make anticipatory smooth eye movements both to the left and the right with a velocity trajectory similar to that observed in the closed-loop phase. Peak velocity in the stabilised-image mode was highly correlated with that in the prior closed-loop phase, but was slightly less (84% on average). In experiment 2 subjects were presented with a continuously illuminated target that was oscillated sinusoidally at frequencies of 0.2-1.34 Hz and amplitudes of +/- 5-20 degrees. After four cycles of closed-loop stimulation the image was stabilised on the fovea at the time of peak target displacement. Subjects continued to generate an oscillatory smooth eye velocity pattern that mimicked the sinusoidal motion of the previous closed-loop phase for at least three further cycles. The peak eye velocity generated ranged from 57-95% of that in the closed-loop phase at frequencies up to 0.8 Hz but decreased significantly at 1.34 Hz. In experiment 3 subjects were presented with a stabilised display throughout and generated smooth eye movements with peak velocity up to 84 degrees/s in the complete absence of any prior external target motion stimulus, by transferring their attention alternately to left and right of the centre of the display. Eye velocity was found to be dependent on the eccentricity of the centre of attention and the frequency of alternation. When the target was partially stabilised on the retina by feeding back only a proportion (Kf = 0.6-0.9) of the eye movement signal to drive the target, subjects were still able to generate smooth movements at will, even though the display did not move as far or as fast as the eye. Peak eye velocity decreased as Kf decreased, suggesting that there was a continuous competitive interaction between the volitional drive and the visual feedback provided by the relative motion of the display with respect to the retina. These results support the evidence for two separate mechanisms of smooth eye movement control in ocular pursuit: reflex control from retinal velocity error feedback and volitional control from an internal source. Arguments are presented to indicate how smooth pursuit may be controlled by matching a voluntarily initiated estimate of the required smooth movement, normally derived from storage of past re-afferent information, against current visual feedback information. Such a mechanism allows preemptive smooth eye movements to be made that can overcome the inherent delays in the visual feedback pathway.

3-lead electrocardiogram is more reliable than pulse oximetry to detect bradycardia during stabilisation at birth of very preterm infants.

PubMed

Iglesias, Beatriz; Rodrí Guez, Marí A José; Aleo, Esther; Criado, Enrique; Martí Nez-Orgado, Jose; Arruza, Luis

2018-05-01

Current neonatal resuscitation guidelines suggest the use of ECG in the delivery room (DR) to assess heart rate (HR). However, reliability of ECG compared with pulse oximetry (PO) in a situation of bradycardia has not been specifically investigated. The objective of the present study was to compare HR monitoring using ECG or PO in a situation of bradycardia (HR <100 beats per minute (bpm)) during preterm stabilisation in the DR. Video recordings of resuscitations of infants <32 weeks of gestation were reviewed. HR readings in a situation of bradycardia (<100 bpm) at any moment during stabilisation were registered with both devices every 5 s from birth. A total of 29 episodes of bradycardia registered by the ECG in 39 video recordings were included in the analysis (n=29). PO did not detect the start of these events in 20 cases (69%). PO detected the start and the end of bradycardia later than the ECG (median (IQR): 5 s (0-10) and 5 s (0-7.5), respectively). A decline in PO accuracy was observed as bradycardia progressed so that by the end of the episode PO offered significantly lower HR readings than ECG. PO detects the start and recovery of bradycardia events slower and less accurately than ECG during stabilisation at birth of very preterm infants. ECG use in this scenario may contribute to an earlier initiation of resuscitation manoeuvres and to avoid unnecessary prolongation of resuscitation efforts after recovery. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Production and validation of model iron-tannate dyed textiles for use as historic textile substitutes in stabilisation treatment studies

PubMed Central

2012-01-01

Background For millennia, iron-tannate dyes have been used to colour ceremonial and domestic objects shades of black, grey, or brown. Surviving iron-tannate dyed objects are part of our cultural heritage but their existence is threatened by the dye itself which can accelerate oxidation and acid hydrolysis of the substrate. This causes many iron-tannate dyed textiles to discolour and decrease in tensile strength and flexibility at a faster rate than equivalent undyed textiles. The current lack of suitable stabilisation treatments means that many historic iron-tannate dyed objects are rapidly crumbling to dust with the knowledge and value they hold being lost forever. This paper describes the production, characterisation, and validation of model iron-tannate dyed textiles as substitutes for historic iron-tannate dyed textiles in the development of stabilisation treatments. Spectrophotometry, surface pH, tensile testing, SEM-EDX, and XRF have been used to characterise the model textiles. Results On application to textiles, the model dyes imparted mid to dark blue-grey colouration, an immediate tensile strength loss of the textiles and an increase in surface acidity. The dyes introduced significant quantities of iron into the textiles which was distributed in the exterior and interior of the cotton, abaca, and silk fibres but only in the exterior of the wool fibres. As seen with historic iron-tannate dyed objects, the dyed cotton, abaca, and silk textiles lost tensile strength faster and more significantly than undyed equivalents during accelerated thermal ageing and all of the dyed model textiles, most notably the cotton, discoloured more than the undyed equivalents on ageing. Conclusions The abaca, cotton, and silk model textiles are judged to be suitable for use as substitutes for cultural heritage materials in the testing of stabilisation treatments. PMID:22616934

Motorcyclists and pillion passengers with open lower-limb fractures: a study using TARN data 2007-2014.

PubMed

Hay-David, Agc; Stacey, T; Pallister, I

2018-03-01

Introduction We aimed to identify population demographics of motorcyclists and pillion passengers with isolated open lower-limb fractures, to ascertain the impact of the revised 2009 British Orthopaedic Association/British Association of Plastic Reconstructive and Aesthetic Surgeons joint standards for the management of open fractures of the lower limb (BOAST 4), in terms of time to skeletal stabilisation and soft-tissue coverage, and to observe any impact on patient movement. Methods Retrospective cohort data was collected by the Trauma Audit and Research Network (TARN). A longitudinal analysis was performed between two timeframes in England (pre-and post-BOAST 4 revision): 2007-2009 and 2010-2014. Results A total of 1564 motorcyclists and 64 pillion passengers were identified. Of these, 93% (1521/1628) were male. The median age for males was 30.5 years and 36.7 years for females. There was a statistically significant difference in the number of patients who underwent skeletal stabilisation (49% vs 65%, P < 0.0001), the time from injury to skeletal stabilisation (7.33 hours vs 14.3 hours, P < 0.0001) and the proportion receiving soft-tissue coverage (26% vs 43%, P < 0.0001). There was no difference in the time from injury to soft-tissue coverage (62.3 hours vs 63.7 hours, P = 0.726). The number of patients taken directly to a major trauma centre (or its equivalent) increased between the two timeframes (12.5% vs, 41%, P < 0.001). Conclusions Since the 2009 BOAST 4 revision, there has been no difference in the time taken from injury to soft-tissue coverage but the time from injury to skeletal stabilisation is longer. There has also been an increase in patient movement to centres offering joint orthopaedic and plastic care.

Local structure in solid solutions of stabilised zirconia with actinide dioxides (UO{sub 2}, NpO{sub 2})

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, Marcus, E-mail: marcus.walter@vkta.d; Somers, Joseph; Bouexiere, Daniel

2011-04-15

The local structure of (Zr,Lu,U)O{sub 2-x} and (Zr,Y,Np)O{sub 2-x} solid solutions has been investigated by extended X-ray absorption fine structure (EXAFS). Samples were prepared by mixing reactive (Zr,Lu)O{sub 2-x} and (Zr,Y)O{sub 2-x} precursor materials with the actinide oxide powders, respectively. Sintering at 1600 {sup o}C in Ar/H{sub 2} yields a fluorite structure with U(IV) and Np(IV). As typical for stabilised zirconia the metal-oxygen and metal-metal distances are characteristic for the different metal ions. The bond lengths increase with actinide concentration, whereas highest adaptation to the bulk stabilised zirconia structure was observed for U---O and Np---O bonds. The Zr---O bond showsmore » only a slight increase from 2.14 A at 6 mol% actinide to 2.18 A at infinite dilution in UO{sub 2} and NpO{sub 2}. The short interatomic distance between Zr and the surrounding oxygen and metal atoms indicate a low relaxation of Zr with respect to the bulk structure, i.e. a strong Pauling behaviour. -- Graphical abstract: Metal-oxygen bond distances in (Zr,Lu,U)O{sub 2-x} solid solutions with different oxygen vacancy concentrations (Lu/Zr=1 and Lu/Zr=0.5). Display Omitted Research Highlights: {yields} EXAFS indicates high U and Np adaption to the bulk structure of stabilised zirconia. {yields} Zr---O bond length is 2.18 A at infinite Zr dilution in UO{sub 2} and NpO{sub 2}. {yields} Low relaxation (strong Pauling behaviour) of Zr explains its low solubility in UO{sub 2}.« less

The effects of excipients and particle engineering on the biophysical stability and aerosol performance of parathyroid hormone (1-34) prepared as a dry powder for inhalation.

PubMed

Shoyele, Sunday A; Sivadas, Neeraj; Cryan, Sally-Ann

2011-03-01

Pulmonary delivery of therapeutic peptides and proteins has many advantages including high relative bioavailability, rapid systemic absorption and onset of action and a non-invasive mode of administration which improves patient compliance. In this study, we investigated the effect of spray-drying (SD) and spray freeze-drying processes on the stability and aerosol performance of parathyroid hormone (PTH) (1-34) microparticles. In this study, the stabilisation effect of trehalose (a non-reducing sugar) and Brij 97 (a non-ionic surfactant) on spray-dried PTH particles was assessed using analytical techniques including circular dichroism (CD), fluorescence spectroscopy, modulated differential scanning calorimetry and an in vitro bioactivity assay. Physical characterisation also included electron microscopy, tap density measurement and laser light diffraction. The aerosol aerodynamic performance of the formulations was assessed using the Andersen cascade impactor. Based on these studies, a formulation for spray freeze-drying was selected and the effects of the two particle engineering techniques on the biophysical stability and aerosol performance of the resulting powders was determined. CD, fluorescence spectroscopy and bioactivity data suggest that trehalose when used alone as a stabilising excipient produces a superior stabilising effect than when used in combination with a non-ionic surfactant. This highlights the utility of CD and fluorescence spectroscopy studies for the prediction of protein bioactivity post-processing. Therefore, a method and formulation suitable for the preparation of PTH as a dry powder was developed based on spray-drying PTH with trehalose as a stabiliser with the bioactivity of SD PTH containing trehalose being equivalent to that of unprocessed PTH. © 2011 American Association of Pharmaceutical Scientists

Insufficient stability of pedicle screws in osteoporotic vertebrae: biomechanical correlation of bone mineral density and pedicle screw fixation strength.

PubMed

Weiser, Lukas; Huber, Gerd; Sellenschloh, Kay; Viezens, Lennart; Püschel, Klaus; Morlock, Michael M; Lehmann, Wolfgang

2017-11-01

Loosening of pedicle screws is one major complication of posterior spinal stabilisation, especially in the patients with osteoporosis. Augmentation of pedicle screws with cement or lengthening of the instrumentation is widely used to improve implant stability in these patients. However, it is still unclear from which value of bone mineral density (BMD) the stability of pedicle screws is insufficient and an additional stabilisation should be performed. The aim of this study was to investigate the correlation of bone mineral density and pedicle screw fatigue strength as well as to define a threshold value for BMD below which an additional stabilisation is recommended. Twenty-one human T12 vertebral bodies were collected from donors between 19 and 96 years of age and the BMD was measured using quantitative computed tomography. Each vertebral body was instrumented with one pedicle screw and mounted in a servo-hydraulic testing machine. Fatigue testing was performed by implementing a cranio-caudal sinusoidal, cyclic (0.5 Hz) load with stepwise increasing peak force. A significant correlation between BMD and cycles to failure (r = 0.862, r 2  = 0.743, p < 0.001) as well as for the linearly related fatigue load was found. Specimens with BMD below 80 mg/cm 3 only reached 45% of the cycles to failure and only 60% of the fatigue load compared to the specimens with adequate bone quality (BMD > 120 mg/cm 3 ). There is a close correlation between BMD and pedicle screw stability. If the BMD of the thoracolumbar spine is less than 80 mg/cm 3 , stability of pedicle screws might be insufficient and an additional stabilisation should be considered.

Incidence of human papillomavirus positive tonsillar and base of tongue carcinoma: a stabilisation of an epidemic of viral induced carcinoma?

PubMed

Näsman, Anders; Nordfors, Cecilia; Holzhauser, Stefan; Vlastos, Andrea; Tertipis, Nikolaos; Hammar, Ulf; Hammarstedt-Nordenvall, Lalle; Marklund, Linda; Munck-Wikland, Eva; Ramqvist, Torbjörn; Bottai, Matteo; Dalianis, Tina

2015-01-01

To investigate whether the rise during the past decades in the incidence of tonsillar and base of tongue squamous cell carcinoma (TSCC and BOTSCC) and the proportion of human papillomavirus (HPV) positive cancer has continued in Stockholm. Pre-treatment biopsies (n=252) available from 280 patients diagnosed with TSCC and BOTSCC during 2008-2012 in the County of Stockholm were tested for HPV DNA by a multiplex bead-based assay. Incidence records were acquired from the Swedish Cancer Registry. The data obtained were evaluated together with previous figures from 1970 to 2007. HPV DNA was present in 186/252 (74%) of TSCC and BOTSCC biopsies obtained during 2008-2012 in Stockholm. In this region the age-standardised incidence, including the prevalence of HPV-positive and HPV-negative TSCC stabilised 2007-2012 compared to 2000-2006, while for BOTSCC throughout 1998-2012 the same parameters increased moderately (p<0.05, for all). In parallel, from 2000 to 2006 through 2007-2012 in Sweden, the age-standardised incidence of both TSCC and BOTSCC continued to rise (p=0.012 and p=0.001 respectively). During 2000-2012 the age-standardised incidence and the proportion of HPV-positive TSCC have stabilised at a high level, while the proportion of HPV-negative cancer has remained at a low level in Stockholm, whereas for BOTSCC all parameters are increasing moderately. In contrast, in Sweden the incidence of both TSCC and BOTSCC is still increasing. We hypothesise that the HPV epidemic could be stabilising, first for TSCC, but so far not for BOTSCC, in e.g. some urban areas, while previous trends for both tumours persist at other geographic locations. Copyright © 2014 Elsevier Ltd. All rights reserved.

Changes in Muscarinic M2 Receptor Levels in the Cortex of Subjects with Bipolar Disorder and Major Depressive Disorder and in Rats after Treatment with Mood Stabilisers and Antidepressants.

PubMed

Gibbons, Andrew Stuart; Jeon, Won Je; Scarr, Elizabeth; Dean, Brian

2016-04-01

Increasingly, data are implicating muscarinic receptors in the aetiology and treatment of mood disorders. This led us to measure levels of different muscarinic receptor-related parameters in the cortex from people with mood disorders and the CNS of rats treated with mood stabilisers and antidepressant drugs. We measured [(3)H]AF-DX 384 binding in BA 46 and BA 24 from subjects with bipolar disorders (n = 14), major depressive disorders (n = 19), as well as age- and sex-matched controls (n = 19) and the CNS of rats treated with fluoxetine or imipramine. In addition, we used Western blots to measure levels of CHRM2 protein and oxotremorine-M stimulated [(35)S]GTPγS binding as a measure of CHRM 2 / 4 signaling. Compared with controls, [(3)H]AF-DX 384 binding was lower in BA 24 and BA 46 in bipolar disorders and major depressive disorders, while CHRM2 protein and oxotremorine-M stimulated [(35)S]GTPγS binding was only lower in BA 24. Compared with vehicle, treatment with mood stabilisers, antidepressant drugs for 10 days, or imipramine for 28 days resulted in higher levels of in [(3)H]AF-DX 384 binding select regions of rat CNS. Our data suggest that levels of CHRM2 are lower in BA 24 from subjects with mood disorders, and it is possible that signalling by that receptor is also less in this cortical region. Our data also suggest increasing levels of CHRM2 may be involved in the mechanisms of action of mood stabilisers and tricyclic antidepressants. © The Author 2015. Published by Oxford University Press on behalf of CINP.

Changes in Muscarinic M2 Receptor Levels in the Cortex of Subjects with Bipolar Disorder and Major Depressive Disorder and in Rats after Treatment with Mood Stabilisers and Antidepressants

PubMed Central

Gibbons, Andrew Stuart; Jeon, Won Je; Scarr, Elizabeth; Dean, Brian

2016-01-01

Background: Increasingly, data are implicating muscarinic receptors in the aetiology and treatment of mood disorders. This led us to measure levels of different muscarinic receptor-related parameters in the cortex from people with mood disorders and the CNS of rats treated with mood stabilisers and antidepressant drugs. Methods: We measured [3H]AF-DX 384 binding in BA 46 and BA 24 from subjects with bipolar disorders (n = 14), major depressive disorders (n = 19), as well as age- and sex-matched controls (n = 19) and the CNS of rats treated with fluoxetine or imipramine. In addition, we used Western blots to measure levels of CHRM2 protein and oxotremorine-M stimulated [35S]GTPγS binding as a measure of CHRM 2 / 4 signaling. Results: Compared with controls, [3H]AF-DX 384 binding was lower in BA 24 and BA 46 in bipolar disorders and major depressive disorders, while CHRM2 protein and oxotremorine-M stimulated [35S]GTPγS binding was only lower in BA 24. Compared with vehicle, treatment with mood stabilisers, antidepressant drugs for 10 days, or imipramine for 28 days resulted in higher levels of in [3H]AF-DX 384 binding select regions of rat CNS. Conclusions: Our data suggest that levels of CHRM2 are lower in BA 24 from subjects with mood disorders, and it is possible that signalling by that receptor is also less in this cortical region. Our data also suggest increasing levels of CHRM2 may be involved in the mechanisms of action of mood stabilisers and tricyclic antidepressants. PMID:26475745

Production and validation of model iron-tannate dyed textiles for use as historic textile substitutes in stabilisation treatment studies.

PubMed

Wilson, Helen; Carr, Chris; Hacke, Marei

2012-05-22

For millennia, iron-tannate dyes have been used to colour ceremonial and domestic objects shades of black, grey, or brown. Surviving iron-tannate dyed objects are part of our cultural heritage but their existence is threatened by the dye itself which can accelerate oxidation and acid hydrolysis of the substrate. This causes many iron-tannate dyed textiles to discolour and decrease in tensile strength and flexibility at a faster rate than equivalent undyed textiles. The current lack of suitable stabilisation treatments means that many historic iron-tannate dyed objects are rapidly crumbling to dust with the knowledge and value they hold being lost forever.This paper describes the production, characterisation, and validation of model iron-tannate dyed textiles as substitutes for historic iron-tannate dyed textiles in the development of stabilisation treatments. Spectrophotometry, surface pH, tensile testing, SEM-EDX, and XRF have been used to characterise the model textiles. On application to textiles, the model dyes imparted mid to dark blue-grey colouration, an immediate tensile strength loss of the textiles and an increase in surface acidity. The dyes introduced significant quantities of iron into the textiles which was distributed in the exterior and interior of the cotton, abaca, and silk fibres but only in the exterior of the wool fibres. As seen with historic iron-tannate dyed objects, the dyed cotton, abaca, and silk textiles lost tensile strength faster and more significantly than undyed equivalents during accelerated thermal ageing and all of the dyed model textiles, most notably the cotton, discoloured more than the undyed equivalents on ageing. The abaca, cotton, and silk model textiles are judged to be suitable for use as substitutes for cultural heritage materials in the testing of stabilisation treatments.

Attachment of composite porous supra-particles to air-water and oil-water interfaces: theory and experiment.

PubMed

Paunov, Vesselin N; Al-Shehri, Hamza; Horozov, Tommy S

2016-09-29

We developed and tested a theoretical model for the attachment of fluid-infused porous supra-particles to a fluid-liquid interface. We considered the wetting behaviour of agglomerated clusters of particles, typical of powdered materials dispersed in a liquid, as well as of the adsorption of liquid-infused colloidosomes at the liquid-fluid interface. The free energy of attachment of a composite spherical porous supra-particle made from much smaller aggregated spherical particles to the oil-water interface was calculated. Two cases were considered: (i) a water-filled porous supra-particle adsorbed at the oil-water interface from the water phase, and, (ii) an oil-filled porous supra-particle adsorbed at the oil-water interface from the oil-phase. We derived equations relating the three-phase contact angle of the smaller "building block" particles and the contact angle of the liquid-infused porous supra-particles. The theory predicts that the porous supra-particle contact angle attached at the liquid interface strongly depends on the type of fluid infused in the particle pores and the fluid phase from which it approaches the liquid interface. We tested the theory by using millimetre-sized porous supra-particles fabricated by evaporation of droplets of polystyrene latex suspension on a pre-heated super-hydrophobic surface, followed by thermal annealing at the glass transition temperature. Such porous particles were initially infused with water or oil and approached to the oil-water interface from the infusing phase. The experiment showed that when attaching at the hexadecane-water interface, the porous supra-particles behaved as hydrophilic when they were pre-filled with water and hydrophobic when they were pre-filled with hexadecane. The results agree with the theoretically predicted contact angles for the porous composite supra-particles based on the values of the contact angles of their building block latex particles measured with the Gel Trapping Technique. The experimental data for the attachment of porous supra particles to the air-water interface from both air and water also agree with the theoretical model. This study gives important insights about how porous particles and particle aggregates attach to the oil-water interface in Pickering emulsions and the air-water surface in particle-stabilised aqueous foams relevant in ore flotation and a range of cosmetic, pharmaceutical, food, home and personal care formulations.

Petroleum hydrogeology of the Great Hungarian Plain, Eastern Pannonian Basin, Hungary

NASA Astrophysics Data System (ADS)

Almasi, Istvan

The results of a regional scale hydrogeological investigation conducted in the Great Hungarian Plain, Eastern Pannonian Basin, for the purposes of petroleum exploration are presented. Two regional aquitards and three regional aquifers were determined in the poorly-to-well consolidated clastic basin fill of the Neogene-Quaternary age and the indurated basement of the Pre-Neogene age. The fluid-potential field was mapped using measured values of stabilised water level and pore-pressure. Two regional fluid flow regimes were recognised: an upper gravity-driven flow regime, and a lower overpressured regime, where super-hydrostatic pore pressures of 1--35 MPa are encountered. The transition between the two flow regimes does not correlate with any particular hydrostratigraphic boundary or elevation range. Apparently, its position and nature are controlled by the morphology of the rigid basement, and locally by the permeability contrasts within the overlying hydrostratigraphic units. Local hydrostratigraphic breaches and conduit faults facilitate hydraulic communication across the regional aquitards. The basin is hydraulically continuous. The mapped groundwater flow directions do not match the predictions of compactional flow models. At two gas-fields, up to 10 MPa overpressures are probably caused by buoyancy forces. Transient overpressures can not be maintained over geologic time in the basin, due to the rock's low hydraulic resistance. Regional tectonic compressive stress, probably with a Recent increase in intensity, offers a new and plausible explanation for the distribution pattern of overpressures in the Great Hungarian Plain. Gravity-driven groundwater flow plays a determinant role in petroleum migration and entrapment. Compactional flow models can explain the present-day position of several known petroleum accumulations within the overpressured regime. However, most accumulations are also associated with particular fluid-potential anomaly-patterns of the actual flow field, which also suggest the possibility of petroleum remigration toward the graben centres and upward. The geothermal characteristics show that pure conduction is the dominant regional heat transfer mechanism within the entire basin. The encountered advective thermal anomalies correlate well with fluid potential anomalies observed in both fluid flow regimes, as well as with certain petroleum accumulations. Toth's (1980) hydraulic theory of petroleum migration was found applicable in a deforming Neogene sedimentary basin, the Great Hungarian Plain.* *This dissertation includes a CD that is compound (contains both a paper copy and a CD as part of the dissertation). The CD requires the following applications: Adobe Acrobat, Microsoft Office.

Dissipative instability in a partially ionised prominence plasma slab

NASA Astrophysics Data System (ADS)

Ballai, I.; Pintér, B.; Oliver, R.; Alexandrou, M.

2017-07-01

Aims: We aim to investigate the nature of dissipative instability appearing in a prominence planar thread filled with partially ionised plasma in the incompressible limit. The importance of partial ionisation is investigated in terms of the ionisation factor and the wavelength of sausage and kink waves propagating in the slab. Methods: In order to highlight the role of partial ionisation, we have constructed models describing various situations we can meet in solar prominence fine structure. Matching the solutions for the transversal component of the velocity and total pressure at the interfaces between the prominence slab and surrounding plasmas, we derived a dispersion relation whose imaginary part describes the evolution of the instability. Results were obtained in the limit of weak dissipation. We have investigated the appearance of instabilities in prominence dark plumes using single and two-fluid approximations. Results: Using simple analytical methods, we show that dissipative instabilities appear for flow speeds that are less than the Kelvin-Helmholtz instability threshold. The onset of instability is determined by the equilibrium flow strength, the ionisation factor of the plasma, the wavelength of waves and the ion-neutral collisional rate. For a given wavelength and for ionisation degrees closer to a neutral gas, the propagating waves become unstable for a narrow band of flow speeds, meaning that neutrals have a stabilising effect. Our results show that the partially ionised plasma describing prominence dark plumes becomes unstable only in a two-fluid (charged particles-neutrals) model, that is for periods that are smaller than the ion-neutral collision time. Conclusions: The present study improves our understanding of the complexity of dynamical processes and stability of solar prominences and the role partial ionisation in destabilising the plasma. We showed the necessity of two-fluid approximation when discussing the nature of instabilities: waves in a single fluid approximation show a great deal of stability. Our results clearly show that the problem of partial ionisation introduces new aspects of plasma stability with consequences on the evolution of partially ionised plasmas and solar prominences, in particular.

Understanding physical rock properties and their relation to fluid-rock interactions under supercritical conditions

NASA Astrophysics Data System (ADS)

Kummerow, Juliane; Raab, Siegfried; Meyer, Romain

2017-04-01

The electrical conductivity of rocks is, in addition to lithological factors (mineralogy, porosity) and physical parameters (temperature, pressure) sensitive to the nature of pore fluids (phase, salinity), and thus may be an indicative measure for fluid-rock interactions. Especially near the critical point, which is at 374.21° C and 22.12 MPa for pure water, the physico-chemical properties of aqueous fluids change dramatically and mass transfer and diffusion-controlled chemical reactivity are enhanced, which in turn leads to the formation of element depletion/ enrichment patterns or cause mineral dissolution. At the same time, the reduction of the dielectric constant of water promotes ion association and consequently mineral precipitation. All this cause changes in the electrical conductivity of geothermal fluids and may have considerable effects on the porosity and hydraulic properties of the rocks with which they are in contact. In order to study the impact of fluid-rock interactions on the physical properties of fluids and rocks in near- and supercritical geological settings in more detail, in the framework of the EU-funded project "IMAGE" (Integrated Methods for Advanced Geothermal Exploration) hydraulic and electrical properties of rock cores from different active and exhumed geothermal areas on Iceland were measured up to supercritical conditions (Tmax = 380° C, pfluid = 23 MPa) during long-term (2-3 weeks) flow-through experiments in an internally heated gas pressure vessel at a maximum confining pressure of 42 MPa. In a second flow-through facility both the intrinsic T-dependent electrical fluid properties as well as the effect of mineral dissolution/ precipitation on the fluid conductivity were measured for increasing temperatures in a range of 24 - 422° C at a constant fluid pressure of 31 MPa. Petro- and fluid physical measurements were supplemented by a number of additional tests, comprising microstructural investigations as well as the chemical analysis of fluid samples, which were taken at every temperature level. Both physical and chemical data indicate only slight fluid-rock interactions at T < 250° C and the increase in bulk conductivity is most probably dominated by a T-dependence of the surface conductance. At higher temperatures, the decreasing fluid density causes the decrease of dielectric constant, which in turn leads to the precipitation of minerals due to a promoted association between oppositely charged ions. This is intensified at the critical point, indicated by a sharp decrease in conductivity, when regarding pure fluids. The opposite was observed in experiments, where fluid-solid interaction was allowed. In this case, the conductivity of the bulk system has increased within seconds nearly by factor 7. This points to a massive release of charge carriers due to an extensive and spontaneous increase in rock solubility, what counterbalances the effect of mineral precipitation. Moreover, the permanent oscillation of conductivities at supercritical conditions may indicate a dynamic interplay of ion depletion by mineral precipitation and the input of new charge carriers due to mineral dissolution. Regarding the permeability we can resolve the influence of mineral precipitation only, which is indicated by a decrease in rock permeability by about 5 % after the sample was exposed to supercritical conditions for 4 hours. Especially, for Si a continuous increase of ion concentration in the fluid samples is revealed for increasing temperatures, indicating a beginning mineral dissolution above 150° C. At near-critical conditions also Al and Pb as well as the rare earth elements (REE) are more intensively dissolved. From SEM analyses it is apparent that the alteration of the solid material is most effective where fresh fluid is continuously flowing around the solid, while stagnant fluids led to a much less pervasive alteration of the material. In this case, solid dissolution seems to slow down considerably or even comes to an end, what can be explained by the adjustment of a chemical equilibrium and the stabilisation of the reaction front.

Finite-time stabilisation of a class of switched nonlinear systems with state constraints

NASA Astrophysics Data System (ADS)

Huang, Shipei; Xiang, Zhengrong

2018-06-01

This paper investigates the finite-time stabilisation for a class of switched nonlinear systems with state constraints. Some power orders of the system are allowed to be ratios of positive even integers over odd integers. A Barrier Lyapunov function is introduced to guarantee that the state constraint is not violated at any time. Using the convex combination method and a recursive design approach, a state-dependent switching law and state feedback controllers of individual subsystems are constructed such that the closed-loop system is finite-time stable without violation of the state constraint. Two examples are provided to show the effectiveness of the proposed method.

Sliding mode stabilisation of networked systems with consecutive data packet dropouts using only accessible information

NASA Astrophysics Data System (ADS)

Argha, Ahmadreza; Li, Li; W. Su, Steven

2017-04-01

This paper develops a novel stabilising sliding mode for systems involving uncertainties as well as measurement data packet dropouts. In contrast to the existing literature that designs the switching function by using unavailable system states, a novel linear sliding function is constructed by employing only the available communicated system states for the systems involving measurement packet losses. This also equips us with the possibility to build a novel switching component for discrete-time sliding mode control (DSMC) by using only available system states. Finally, using a numerical example, we evaluate the performance of the designed DSMC for networked systems.

Developments of capacitance stabilised etalon technology

NASA Astrophysics Data System (ADS)

Bond, R. A.; Foster, M.; Thwaite, C.; Thompson, C. K.; Rees, D.; Bakalski, I. V.; Pereira do Carmo, J.

2017-11-01

This paper describes a high-resolution optical filter (HRF) suitable for narrow bandwidth filtering in LIDAR applications. The filter is composed of a broadband interference filter and a narrowband Fabry-Perot etalon based on the capacitance stabilised concept. The key requirements for the HRF were a bandwidth of less than 40 pm, a tuneable range of over 6 nm and a transmission greater than 50%. These requirements combined with the need for very high out-of-band rejection (greater than 50 dB in the range 300 nm to 1200 nm) drive the design of the filter towards a combination of high transmission broadband filter and high performance tuneable, narrowband filter.

Frequency control of tunable lasers using a frequency-calibrated λ-meter in an experiment on preparation of Rydberg atoms in a magneto-optical trap

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saakyan, S A; Vilshanskaya, E V; Zelener, B B

2015-09-30

A new technique is proposed and applied to study the frequency drift of an external-cavity semiconductor laser, locked to the transmission resonances of a thermally stabilised Fabry–Perot interferometer. The interferometer frequency drift is measured to be less than 2 MHz h{sup -1}. The laser frequency is measured using an Angstrom wavemeter, calibrated using an additional stabilised laser. It is shown that this system of laser frequency control can be used to identify Rydberg transitions in ultracold {sup 7}Li atoms. (control of laser radiation parameters)

The detection and stabilisation of limit cycle for deterministic finite automata

NASA Astrophysics Data System (ADS)

Han, Xiaoguang; Chen, Zengqiang; Liu, Zhongxin; Zhang, Qing

2018-04-01

In this paper, the topological structure properties of deterministic finite automata (DFA), under the framework of the semi-tensor product of matrices, are investigated. First, the dynamics of DFA are converted into a new algebraic form as a discrete-time linear system by means of Boolean algebra. Using this algebraic description, the approach of calculating the limit cycles of different lengths is given. Second, we present two fundamental concepts, namely, domain of attraction of limit cycle and prereachability set. Based on the prereachability set, an explicit solution of calculating domain of attraction of a limit cycle is completely characterised. Third, we define the globally attractive limit cycle, and then the necessary and sufficient condition for verifying whether all state trajectories of a DFA enter a given limit cycle in a finite number of transitions is given. Fourth, the problem of whether a DFA can be stabilised to a limit cycle by the state feedback controller is discussed. Criteria for limit cycle-stabilisation are established. All state feedback controllers which implement the minimal length trajectories from each state to the limit cycle are obtained by using the proposed algorithm. Finally, an illustrative example is presented to show the theoretical results.

Robust reliable sampled-data control for switched systems with application to flight control

NASA Astrophysics Data System (ADS)

Sakthivel, R.; Joby, Maya; Shi, P.; Mathiyalagan, K.

2016-11-01

This paper addresses the robust reliable stabilisation problem for a class of uncertain switched systems with random delays and norm bounded uncertainties. The main aim of this paper is to obtain the reliable robust sampled-data control design which involves random time delay with an appropriate gain control matrix for achieving the robust exponential stabilisation for uncertain switched system against actuator failures. In particular, the involved delays are assumed to be randomly time-varying which obeys certain mutually uncorrelated Bernoulli distributed white noise sequences. By constructing an appropriate Lyapunov-Krasovskii functional (LKF) and employing an average-dwell time approach, a new set of criteria is derived for ensuring the robust exponential stability of the closed-loop switched system. More precisely, the Schur complement and Jensen's integral inequality are used in derivation of stabilisation criteria. By considering the relationship among the random time-varying delay and its lower and upper bounds, a new set of sufficient condition is established for the existence of reliable robust sampled-data control in terms of solution to linear matrix inequalities (LMIs). Finally, an illustrative example based on the F-18 aircraft model is provided to show the effectiveness of the proposed design procedures.

Characterisation of Physicochemical Properties of Propionylated Corn Starch and Its Application as Stabiliser

PubMed Central

Hong, Lee-Fen; Cheng, Lai-Hoong; Lee, Chong Yew

2015-01-01

Summary A series of propionylated starches with different degrees of substitution (DS) was synthesised and their physicochemical properties and application as a stabiliser were investigated. Starch propionates with moderate DS were prepared by esterification of native corn starch with propionic anhydride. By varying the reaction times of the esterification process, twelve starch propionates with DS of 0.47 to 0.94 were prepared. FTIR and NMR confirmed the introduction of propionyl groups to the starch. X-ray diffraction pattern showed reduced crystallinity in the starch propionates. The contact angle was found to increase proportionately with the increase in DS. Swelling power results showed that starch propionates were able to swell more than native corn starch at low temperature (40 °C). Oil-in- -water (O/W) emulsions prepared using starch propionates (DS of 0.64 to 0.86) showed exceptional stability when challenged by centrifugation stress test. These stable O/W emulsions had viscosities in the range of 1236.7–3330.0 mPa·s. In conclusion, moderately substituted short-chain (propionylated) starches could be a promising cold swelling starch, thickener and O/W emulsion stabiliser in food, pharmaceutical and cosmetic industries. PMID:27904359

Stabilised finite-element methods for solving the level set equation with mass conservation

NASA Astrophysics Data System (ADS)

Kabirou Touré, Mamadou; Fahsi, Adil; Soulaïmani, Azzeddine

2016-01-01

Finite-element methods are studied for solving moving interface flow problems using the level set approach and a stabilised variational formulation proposed in Touré and Soulaïmani (2012; Touré and Soulaïmani To appear in 2016), coupled with a level set correction method. The level set correction is intended to enhance the mass conservation satisfaction property. The stabilised variational formulation (Touré and Soulaïmani 2012; Touré and Soulaïmani, To appear in 2016) constrains the level set function to remain close to the signed distance function, while the mass conservation is a correction step which enforces the mass balance. The eXtended finite-element method (XFEM) is used to take into account the discontinuities of the properties within an element. XFEM is applied to solve the Navier-Stokes equations for two-phase flows. The numerical methods are numerically evaluated on several test cases such as time-reversed vortex flow, a rigid-body rotation of Zalesak's disc, sloshing flow in a tank, a dam-break over a bed, and a rising bubble subjected to buoyancy. The numerical results show the importance of satisfying global mass conservation to accurately capture the interface position.

Fibril stability in solutions of twisted -sheet peptides: a new kind of micellization in chiral systems

NASA Astrophysics Data System (ADS)

Nyrkova, I. A.; Semenov, A. N.; Aggeli, A.; Boden, N.

2000-10-01

The problem of fibril (fibre) formation in chiral systems is explored theoretically being supported by experiments on synthetic de novo 11-mer peptide forming self-assembled -sheet tapes. Experimental data unambiguously indicate that the tapes form fibrils of nearly monodisperse thickness ca. 8-10 nm. Fibril formation and stabilisation are attributed to inter-tape face-to-face attraction and their intrinsic twist, correspondingly. The proposed theory is capable of predicting the fibril aggregation number and its equilibrium twist in terms of molecular parameters of the primary tapes. The suggested novel mechanism of twist stabilisation of finite aggregates (fibrils) is different to the well-known stabilisation of micelles in amphiphilic systems, and it is likely to explain the formation and stability of fibrils in a wide variety of systems including proteinaceous amyloid fibres, sickle-cell hemoglobin fibres responsible for HbS anemia, corkscrew threads found in chromonics in the presence of chiral additives and native cellulose microfibrillar crystallites. The theory also makes it possible to extract the basic molecular parameters of primary tapes (inter-tape attraction energy, helical twist step, elastic moduli) from the experimental data.

Geotechnical and mineralogical characterisations of marine-dredged sediments before and after stabilisation to optimise their use as a road material.

PubMed

Saussaye, L; van Veen, E; Rollinson, G; Boutouil, M; Andersen, J; Coggan, J

2017-12-01

Dredging activities to extend, deepen and maintain access to harbours generate significant volumes of waste dredged material. Some ways are investigated to add value to these sediments. One solution described here is their use in road construction following treatment with hydraulic binders. This paper presents the characterisation of four sediments, in their raw state and after 90 days of curing following stabilisation treatment with lime and cement, using a combination of novel and established analytical techniques to investigate subsequent changes in mineralogy. These sediments are classified as fine, moderately to highly organic and highly plastic and their behaviour is linked to the presence of smectite clays. The main minerals found in the sediments using X-ray diffraction (XRD) and automated mineralogy are quartz, calcite, feldspars, aluminium silicates, pyrite and halite. Stabilisation was found to improve the mechanical performances of all the sediments. The formation of cementitious hydrates was not specifically detected using automated mineralogy or XRD. However, a decrease in the percentage volume of aluminium silicates and aluminium-iron silicates and an increase of the percentage volume of feldspars and carbonates was observed.

Alkaline dehydration of anion-exchanged human urine: Volume reduction, nutrient recovery and process optimisation.

PubMed

Simha, Prithvi; Senecal, Jenna; Nordin, Annika; Lalander, Cecilia; Vinnerås, Björn

2018-06-02

In urine-separating sanitation systems, bacterial urease enzymes can hydrolyse urea to ammonia during the pipe transport and storage of urine. The present study investigated whether it was possible to reduce the urine volume without losing the nitrogen as ammonia. A method for stabilising the urine prior to dehydration was developed. Briefly, fresh human urine was stabilised by passage through an anion-exchanger, added to an alkaline media (wood ash or alkalised biochar), and dehydrated. Urine dehydration was investigated at three temperatures: 40, 45 and 50 °C. The influence of various factors affecting the dehydration process was modelled and the rate of urine dehydration was optimised. Results indicated that 75% (v/v) of the urine has to pass through the ion-exchanger for alkaline stabilisation of urine to occur. At all investigated temperatures, the dehydrator accomplished >90% volume reduction of ion-exchanged urine, > 70% N retention and 100% recovery of P and K. To realise high degree of nutrient valorisation, this study proposes combining source-separation of human urine with alkaline dehydration. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Phelan-McDermid syndrome due to SHANK3 mutation in an intellectually disabled adult male: successful treatment with lithium.

PubMed

Egger, Jos I M; Verhoeven, Willem M A; Groenendijk-Reijenga, Renske; Kant, Sarina G

2017-09-28

For 30 years, Phelan and co-workers described a syndrome characterised by neonatal hypotonia, global developmental delay, strongly impaired speech, sleep disturbances and hyperreactivity to sensory stimuli. This Phelan-McDermid syndrome (PMS), also presenting with symptoms from the autism spectrum and a higher risk of developing seizure disorders, may be caused by a deletion of chromosome 22q13 or by a mutation in the SHANK3 gene. Its core psychopathological phenotype comprises symptoms from the bipolar spectrum for which generally treatment with a mood-stabilising anticonvulsant in combination with an atypical antipsychotic seems to be most effective. In addition to two elsewhere published adolescent patients, we here describe in detail the history of an adult male patient with PMS caused by a SHANK3 mutation in whom successive treatment regimens with antipsychotics and mood-stabilising anticonvulsants were all ineffective. Ultimately, addition of lithium to existing olanzapine therapy led to enduring stabilisation of mood and behaviour. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The potential for facilitating spring discharge from continental climate waste stabilisation ponds by carry-over of treated wastewater: concepts and experimental findings.

PubMed

Whalley, C; Pak, L N; Heaven, S

2007-01-01

The research investigated some factors influencing the rate of stabilisation of wastewater in the spring period in continental climate waste stabilisation ponds, and in particular the potential for bringing forward the discharge date by optimising storage capacity and dilution. Experiments using pilot and modelscale ponds were set up in Almaty, Kazakhstan. These simulated operating regimes for a facultative and storage/maturation pond system subject to ice cover from late November until late March. Two pilot-scale facultative ponds were operated at hydraulic retention times (HRT) of 20 and 30 days, with surface loading rates of 100 and 67 kg BOD ha(-1) day(-1). Effluent from the 20-day HRT facultative pond was then fed to two pilot-scale storage/maturation ponds which had been partially emptied and allowed to refill over the winter period with no removal of effluent. The paper discusses the results of the experiments with respect to selection of an operating regime to make treated wastewater available early in the spring. Preliminary results indicate that there may be potential for alternative operating protocols designed to maximise their performance and economic potential.

? and ? nonquadratic stabilisation of discrete-time Takagi-Sugeno systems based on multi-instant fuzzy Lyapunov functions

NASA Astrophysics Data System (ADS)

Tognetti, Eduardo S.; Oliveira, Ricardo C. L. F.; Peres, Pedro L. D.

2015-01-01

The problem of state feedback control design for discrete-time Takagi-Sugeno (TS) (T-S) fuzzy systems is investigated in this paper. A Lyapunov function, which is quadratic in the state and presents a multi-polynomial dependence on the fuzzy weighting functions at the current and past instants of time, is proposed.This function contains, as particular cases, other previous Lyapunov functions already used in the literature, being able to provide less conservative conditions of control design for TS fuzzy systems. The structure of the proposed Lyapunov function also motivates the design of a new stabilising compensator for Takagi-Sugeno fuzzy systems. The main novelty of the proposed state feedback control law is that the gain is composed of matrices with multi-polynomial dependence on the fuzzy weighting functions at a set of past instants of time, including the current one. The conditions for the existence of a stabilising state feedback control law that minimises an upper bound to the ? or ? norms are given in terms of linear matrix inequalities. Numerical examples show that the approach can be less conservative and more efficient than other methods available in the literature.

Sum-of-squares-based fuzzy controller design using quantum-inspired evolutionary algorithm

NASA Astrophysics Data System (ADS)

Yu, Gwo-Ruey; Huang, Yu-Chia; Cheng, Chih-Yung

2016-07-01

In the field of fuzzy control, control gains are obtained by solving stabilisation conditions in linear-matrix-inequality-based Takagi-Sugeno fuzzy control method and sum-of-squares-based polynomial fuzzy control method. However, the optimal performance requirements are not considered under those stabilisation conditions. In order to handle specific performance problems, this paper proposes a novel design procedure with regard to polynomial fuzzy controllers using quantum-inspired evolutionary algorithms. The first contribution of this paper is a combination of polynomial fuzzy control and quantum-inspired evolutionary algorithms to undertake an optimal performance controller design. The second contribution is the proposed stability condition derived from the polynomial Lyapunov function. The proposed design approach is dissimilar to the traditional approach, in which control gains are obtained by solving the stabilisation conditions. The first step of the controller design uses the quantum-inspired evolutionary algorithms to determine the control gains with the best performance. Then, the stability of the closed-loop system is analysed under the proposed stability conditions. To illustrate effectiveness and validity, the problem of balancing and the up-swing of an inverted pendulum on a cart is used.

Chiral quantum dot based materials

NASA Astrophysics Data System (ADS)

Govan, Joseph; Loudon, Alexander; Baranov, Alexander V.; Fedorov, Anatoly V.; Gun'ko, Yurii

2014-05-01

Recently, the use of stereospecific chiral stabilising molecules has also opened another avenue of interest in the area of quantum dot (QD) research. The main goal of our research is to develop new types of technologically important quantum dot materials containing chiral defects, study their properties and explore their applications. The utilisation of chiral penicillamine stabilisers allowed the preparation of new water soluble white emitting CdS quantum nanostructures which demonstrated circular dichroism in the band-edge region of the spectrum. It was also demonstrated that all three types of QDs (D-, L-, and Rac penicillamine stabilised) show very broad emission bands between 400 and 700 nm due to defects or trap states on the surfaces of the nanocrystals. In this work the chiral CdS based quantum nanostructures have also been doped by copper metal ions and new chiral penicilamine stabilized CuS nanoparticles have been prepared and investigated. It was found that copper doping had a strong effect at low levels in the synthesis of chiral CdS nanostructures. We expect that this research will open new horizons in the chemistry of chiral nanomaterials and their application in biotechnology, sensing and asymmetric synthesis.

Minimalist, standard and no footwear on static and dynamic postural stability following jump landing.

PubMed

Zech, Astrid; Argubi-Wollesen, Andreas; Rahlf, Anna-Lina

2015-01-01

In recreational sports, uncushioned, light-weight and minimalist shoes are increasingly used to imitate barefoot situations. Uncertainty exists whether these shoes provide sufficient stability during challenging movements. In this randomised crossover study, 35 healthy distance runners performed jump landing stabilisation and single-leg stance tests on a force plate, using four conditions in random order: barefoot, uncushioned minimalist shoes, cushioned ultraflexible shoes and standard running shoes. Ground reaction force (GRF) and centre of pressure (COP) data were used to determine unilateral jump landing stabilisation time and COP sway velocity during single-leg stance. Repeated measures analysis of variance revealed significant footwear interactions for medial-lateral (p < 0.001) and anterior-posterior COP sway velocity during standing (p < 0.001). The barefoot condition produced significantly greater postural sway velocities (p < 0.001) compared to all footwear conditions. No significant effects were found for jump landing stabilisation time. In conclusion, the results of this study indicate that increased shoe flexibility and reduced sole support have no, or only minor influence on static and dynamic postural control, and therefore, may not increase the risk of traumatic events during sports activities. However, barefoot conditions should be considered carefully when adequate postural control is needed.

Stabilisation splint therapy for temporomandibular pain dysfunction syndrome.

PubMed

Al-Ani, M Z; Davies, S J; Gray, R J M; Sloan, P; Glenny, A M

2004-01-01

Pain dysfunction syndrome (PDS) is the most common temporomandibular disorder (TMD). There are many synonyms for this condition including facial arthromylagia, TMJ dysfunction syndrome, myofacial pain dysfunction syndrome, craniomandibular dysfunction and myofacial pain dysfunction. The aetiology of PDS is multifactorial and many different therapies have been advocated. To establish the effectiveness of stabilisation splint therapy in reducing symptoms in patients with pain dysfunction syndrome. Electronic databases (including the Cochrane Oral Health Group's Trials Register; the Cochrane Central Register of Controlled Trials (CENTRAL); The Cochrane Library Issue 2, 2003; MEDLINE (1966 to June 2001); EMBASE (1966 to June 2001)) were searched. Handsearching of relevant journals was undertaken and reference lists of included studies screened. Experts in the field were contacted to identify unpublished articles. There was no language restriction. Randomised or quasi-randomised controlled trials (RCTs), in which splint therapy was compared concurrently to no treatment, other occlusal appliances, or any other active intervention. Data extraction was carried out independently and in duplicate. Validity assessment of the included trials was carried out at the same time as data extraction. Discrepancies were discussed and a third reviewer consulted. The author of the primary study was contacted where necessary. The studies were grouped according to treatment type and duration of follow up. Twenty potentially relevant RCTs were identified. Eight trials were excluded leaving 12 RCTs for analysis. Stabilisation splint therapy was compared to: acupuncture, bite plates, biofeedback/stress management, visual feedback, relaxation, jaw exercises, non-occluding appliance and minimal/no treatment. There was no evidence of a statistically significant difference in the effectiveness of stabilisation splint therapy (SS) in reducing symptoms in patients with pain dysfunction syndrome compared with other active treatments. There is weak evidence to suggest that the use of SS for the treatment of PDS may be beneficial for reducing pain severity, at rest and on palpation, when compared to no treatment. There is insufficient evidence either for or against the use of stabilisation splint therapy for the treatment of temporomandibular pain dysfunction syndrome. This review suggests the need for further, well conducted RCTs that pay attention to method of allocation, outcome assessment, large sample size, and enough duration of follow up. A standardisation of the outcomes of the treatment of PDS should be established in the RCTs.

Le role du phytoplancton de petite taille (<20 mum) dans les variations des proprietes optiques des eaux du Saint-Laurent

NASA Astrophysics Data System (ADS)

Mas, Sebastien

Les mesures satellitaires de couleur des oceans sont largement determinees par les proprietes optiques inherentes (IOPs) des eaux de surface. D'autre part, le phytoplancton de petite taille (<20 mum) est le plus souvent dominant dans les oceans, et peut donc etre une source importante de variation des IOPs dans les oceans. Dans ce contexte, le but principal de ce doctorat etait de definir l'impact du phytoplancton (<20 mum) sur les variations des proprietes optiques de l'Estuaire et du Golfe du Saint-Laurent (Canada). Afin d'atteindre cet objectif, il etait necessaire de determiner en milieu controle les facteurs de variabilite des proprietes optiques cellulaires et des IOPs du phytoplancton (<20 mum) des eaux du Saint-Laurent, et d'evaluer la contribution du phytoplancton (<20 mum) aux proprietes optiques totales des eaux du Saint-Laurent. Des experiences en laboratoire ont montre que les variations des proprietes optiques des cellules phytoplanctoniques soumises a un cycle jour-nuit, ainsi qu'a des changements concomitants d'intensite lumineuse, peuvent contribuer significativement a la variabilite des proprietes optiques observee en milieu naturel. D'autres experiences ont, quant a elles, mis en evidence que les variations des proprietes optiques des cellules phytoplanctoniques dues aux phases de croissance peuvent alterer les IOPs des oceans, particulierement pendant les periodes de floraison. De plus, la presence de bacteries et de particules detritiques peut egalement affecter la variabilite des IOPs totales, notamment la diffusion. Au printemps, dans l'Estuaire et le Golfe du Saint-Laurent, la contribution du phytoplancton <20 mum aux IOPs presentait des differences regionales evidentes pour les proprietes d'absorption et de diffusion. En plus de la variabilite spatiale, les proprietes optiques cellulaires presentaient des variations journalieres, et ce particulierement pour le picophytoplancton. Enfin, la plupart des differences observees dans les proprietes biooptiques, particulierement l'absorption, etaient attribuables a la contribution du phytoplancton <20 mum. Ceci confirme l'importance de la structure de taille des communautes phytoplanctoniques dans les modeles bio-optiques appliques au Saint-Laurent. L'ensemble des resultats a permis de mettre en evidence l'importance des mecanismes de photoacclimatation et de synchronisation du cycle cellulaire du phytoplancton sur les variations journalieres des IOPs, ainsi que de l'etat physiologique relie au stade de croissance sur les variations temporelles a long terme des IOPs. De plus, le phytoplancton <20 mum contribue de maniere importante aux IOPs et a leur variabilite dans l'Estuaire et le Golfe du St-Laurent, et ce particulierement pour l'absorption. Cette etude de doctorat souligne donc l'importance du phytoplancton <20 mum sur la variabilite des IOPs des oceans.

Shallow vs. Deep Fluid Sources In Hydrothermal Systems: New Insights From VOC Composition In Fumarolic Discharges And Soil Gases Of Yellowstone National Park (USA)

NASA Astrophysics Data System (ADS)

Tassi, F.; Capecchiacci, F.; Montegrossi, G.; Caliro, S.; Chiodini, G.; Vaselli, O.

2008-12-01

The origin of non-methane volatile organic compounds (VOCs) in hydrothermal fluids is related to two distinct mechanisms regulated by different thermodynamic conditions (e.g. Des Marais et al., 1981; Mango, 2000; Capaccioni and Mangani, 2001): i) thermogenic reactions, such as catalytic reforming and/or thermal cracking, which proceed within the main reservoir at medium-to-high temperature (150-350°C) and reduced conditions; ii) biodegradation processes, occurring at relatively shallow depth, where uprising fluids have <150°C and suffer oxidizing conditions. According to these considerations, the main aim of the present investigation is to discriminate the different fluid sources feeding the hydrothermal system on the basis of the C2-C15 organic compounds in fumarolic discharges and soil gases collected at the Yellowstone National Park (USA). A total of 64 and 66 different species were identified in the gas discharges and in the soil gas samples, respectively. The composition of the organic gas fraction in the fumarolic fluids is relatively homogeneous, being dominated by C2-C6 alkanes (81 %) and showing relatively high concentrations of alkenes (13 %), aromatics (3.7 %) and cyclics (1.4 %). Differently, the relative percentages of alkanes and alkenes in the soil gas, where VOC abundances are about two orders of magnitude less abundant than those in the gas discharges, are significantly lower (64 and 6.8 %, respectively) and cyclics are absent. On the other hand, oxygenated species (17.8 %), aromatics (5.6 %) and Cl-bearing compounds (4.5 %) results to be enriched with respect to those measured in the gas vents. Such compositional differences are likely to be due to the bacterial activity in the soil that causes the production of ketones, esters, alcohols, aldehydes and organic acids from the C-H species (hydrocarbons sensu strictu). Organic acids, mainly constituted by ossalic acid and traces of tartaric, malonic citric and succinic ones, were also determined in the fumarolic condensates. This seems to indicate that biodegradation likely occurs even within the hydrothermal systems, since the production of low molecular mass organic acids is to be related to bacterial activity (Arnetoli et al., 2008 and references therein). S-bearing compounds are strongly controlled by the fS values and this would explain the relatively high concentrations of these species in the H2S-rich fumarolic discharges. As far as it concerns the relatively high abundance of halogenated compounds in the soil gases, it can be suggested that the origin of these species is likely to be related to atmospheric contribution. Actually, formation of Cl- bearing species from reactions between VOCs and Cl-rich fluids, such as those of the deep hydrothermal reservoir, is still matter of debate. Therefore, we may speculate that these compounds, characterized by chemical inertness, are added to the hydrothermal fluids from meteoric water recharging the system. References: Arnetoli, M., Montegrossi, G., Buccianti, A., Gonnelli, C., 2008. J. Agricol. Food Chem., 56, 789- 795. Capaccioni, B., Mangani, F., 2001. Earth Planet. Sci. Lett., 188, 543-555. Des Marais, D.J., Donchin, J.H., Truesdell, A.H., Nehring, N.L., 1981. Nature, 292, 826-828. Mango, F.D., 2000. Geochim. Cosmochim. Acta, 64, 1265-1277.

La planification préalable des soins pour les patients en pédiatrie

PubMed Central

2008-01-01

RÉSUMÉ Les progrès médicaux et technologiques ont permis d’ac-croître les taux de survie et d’améliorer la qualité de vie des nourrissons, des enfants et des adolescents ayant des maladies chroniques mettant la vie en danger. La planifi-cation préalable des soins inclut le processus relié aux discussions sur les traitements essentiels au maintien de la survie et la détermination des objectifs des soins de longue durée. Les dispensateurs de soins pédiatriques ont l’obligation éthique d’assimiler cet aspect des soins médicaux. Le présent document de principes vise à aider les dispensateurs de soins à discuter de la planification préalable des soins des patients pédiatriques dans diverses situations. La planification préalable des soins exige des communications efficaces afin de clarifier les objectifs des soins et de s’entendre sur les traitements pertinents ou non pour réaliser ces objectifs, y compris les mesures de réanimation et les mesures palliatives.

Mycorrhizal aspects in slope stabilisation

NASA Astrophysics Data System (ADS)

Graf, Frank

2016-04-01

In order to re-colonise and stabilise slopes affected by superficial soil failure with plants essential requirements have to be met: the plants must grow the plants must survive sustainably plant succession must start and continuously develop These requirements, however, are anything but easy given, particularly under the often hostile environmental conditions dominating on bare and steep slopes. Mycorrhizal fungi, the symbiotic partners of almost all plants used in eco-engineering, are said to improve the plants' ability to overcome periods governed by strongly (growth) limiting factors. Subsequently, results of investigations are presented of mycorrhizal effects on different plant and soil functions related to eco-engineering in general and soil and slope stabilisation in particular. Generally, inoculation yielded higher biomass of the host plants above as well as below ground. Furthermore, the survival rate was higher for mycorrhized compared to non-mycorrhized plants, particularly under extreme environmental conditions. However, the scale of the mycorrhizal impact may be species specific of both the plant host as well as the fungal partner(s) and often becomes evident only after a certain time lag. Depending on the plant-fungus combination the root length per soil volume was found to be between 0 and 2.5 times higher for inoculated compared to non-inoculated specimens. On an alpine graded ski slope the survival of inoculated compared to non-treated Salix herbacea cuttings was significant after one vegetation period only for one of the three added mycorrhizal fungus species. However, after three years all of the inoculated plantlets performed significantly better than the non-inoculated controls. The analysis of the potential for producing and stabilising soil aggregates of five different ectomycorrhizal fungi showed high variation and, for the species Inocybe lacera, no significant difference compared to untreated soil. Furthermore, inoculation of Salix appendiculata with ecto, arbuscular, and the combination of the two mycorrhizal types revealed different effects in respect of aggregate stabilisation as well as above and below ground biomass production of the host plant. Only the ecto-mycorrhized plants significantly increased soil aggregate stability compared to non-inoculated willows. Significantly higher production of host plant biomass was restricted to roots and the inoculation with arbuscular mycorrhiza. Additionally, there are successional processes in mycorrhizal communities in the way that perennial plants do have other fungal partners in their juvenile, prime, and senescent living phase, respectively. It was found that, particularly, in the initial phase of the re-colonisation and development of a protective vegetation cover, the lack of relevant (ecto-) mycorrhizal fungi considerably decelerate or even stop succession processes. Conclusively, with regard to support and accelerate plant growth and the re-colonisation and stabilisation of slopes within the scope of eco-engineering measures it is necessary to select the fungal species based on sound information. This may include ecology and sociology as well as the potential for aggregate formation depending on the plant species used.

Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

PubMed Central

Kahan, Meldon; Wilson, Lynn; Mailis-Gagnon, Angela; Srivastava, Anita

2011-01-01

Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique sur la prescription d’opioïdes à des populations particulières en se fondant sur les recommandations faites dans les lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale en insistant plus précisément sur les études de l’efficacité et de la sécurité des opioïdes dans des populations particulières. Message principal Les médecins de famille peuvent atténuer les risques de surdose, de sédation, d’usage abusif et de dépendance grâce à des stratégies adaptées à l’âge et à l’état de santé des patients. Dans le cas de patients à risque de dépendance, on devrait réserver les opioïdes aux douleurs nociceptives ou neuropathiques bien définies qui n’ont pas répondu aux traitements de première intention. Il faut procéder lentement au titrage des opioïdes, avec des dispensations fréquentes et une étroite surveillance pour dépister tout signe d’usage abusif. Une dépendance aux opioïdes suspectée est prise en charge au moyen d’une thérapie structurée aux opioïdes, d’un traitement à la méthadone ou à la buprénorphine ou encore d’un traitement fondé sur l’abstinence. Les patients souffrant de troubles de l’humeur ou d’anxiété ont tendance à avoir une réponse analgésique atténuée aux opioïdes, sont à risque plus élevé d’usage abusif et prennent souvent des sédatifs qui interagissent défavorablement avec les opioïdes. Il faut prendre des précautions semblables à celles utilisées avec d’autres patients à risque élevé. Il faut faire un sevrage progressif si la douleur du patient demeure sévère même avec un essai adéquat de thérapie aux opioïdes. Chez les personnes âgées, la sédation, les chutes et la surdose peuvent être minimisées en utilisant des doses initiales faibles, un titrage plus lent, un sevrage des benzodiazépines et une bonne éducation des patients. Dans le cas des femmes enceintes qui prennent des opioïdes chaque jour, il faut faire un sevrage progressif et cesser complètement. Si ce n’est pas possible, il faut administrer la dose efficace la plus faible. Les femmes enceintes qui ont une dépendance aux opioïdes devraient recevoir un traitement à la méthadone. Les adolescents sont à risque élevé de surdose d’opioïdes, d’usage abusif et de dépendance. Les patients qui ont des adolescents qui vivent à la maison devraient entreposer leurs opioïdes dans un lieu sûr. Les adolescents ont rarement besoin d’une thérapie à long terme aux opioïdes. Conclusion Les médecins de famille doivent tenir compte de l’âge, de la condition psychiatrique, du degré de risque de dépendance du patient et d’autres facteurs quand ils prescrivent des opioïdes pour la douleur chronique.

Revisiting the role of durable polymers in cardiovascular devices.

PubMed

Mori, Hiroyoshi; Otsuka, Fumiyuki; Gupta, Anuj; Jinnouchi, Hiroyuki; Torii, Sho; Harari, Emanuel; Virmani, Renu; Finn, Aloke V

2017-11-01

Polymers are an essential component of drug-eluting stents (DES) used to control drug release but remain the most controversial component of DES technology. There are two types of polymers employed in DES: durable polymer based DES (DP-DES) and biodegradable polymer DES (BP-DES). First-generation DES were exclusively composed of DP and demonstrated increased rates of late stent failure due in part to poor polymer biocompatibility. Newer generations DES use more biocompatible durable polymers or biodegradable polymers. Areas covered: We will cover issues identified with 1st-generation DP-DES, areas of success and failure in 2nd-generation DP-DES and examine the promise and shortcomings of BP-DES. Briefly, fluorinated polymers used in 2nd-generation DP-DES have excellent anti-thrombogenicity and better biocompatibility than 1st-generation DES polymers. However, these devices lead to persistent drug exposure to the endothelium which impairs endothelial function and predisposes towards neoatherosclerosis. Meanwhile, BP-DES has shortened the duration of drug exposure which might be beneficial for endothelial functional recovery leading to less neoatherosclerosis. However, it remains uncertain whether the long-term biocompatibility of bare metal surfaces is better than that of polymer-coated metals. Expert commentary: Each technology has distinct advantages, which can be optimized depending upon the particular characteristics of the patient being treated.

Moreau's hydrodynamic helicity and the life of vortex knots and links

NASA Astrophysics Data System (ADS)

Irvine, William T. M.

2018-03-01

This contribution to an issue of Comptes rendus Mécanique, commemorating the scientific work of Jean-Jacques Moreau (1923-2014), is intended to give a brief overview of recent developments in the study of helicity dynamics in real fluids and an outlook on the growing legacy of Moreau's work. Moreau's discovery of the conservation of hydrodynamic helicity, presented in an article in the Comptes rendus de l'Académie des sciences in 1961, was not recognized until long after it was published. This seminal contribution is gaining a new life now that modern developments allow the study of helicity and topology in fields and is having a growing impact on diverse areas of physics.

Calendar of Selected Aeronautical and Space Meetings January 1988 (Calendrier des Manifestations Aeronautiques et Spatiales (Selection) Janvier 1988).

DTIC Science & Technology

1987-12-01

margin indicates a ness cntr\\, xx in the left-hand margin indicates a ncw entr\\ subjcti to confirmation. A Subject Index in the form of keywords is...12-1)4. 1_-1)7 Electronic Measurements 0)2-25). 1)12-7. 02-89, 0)2-93. 11412. 11-i)8 Electronic SYtems 012-), 1)2-19. 12-1. (12-14. 02-10. 0)2-2(, 02...4-13. (4-14, 04-17. 04-18. 04-19. 04-20. ((6-22. 07-49. (9-23. 09-32. 12-07 Fluid Systems 04-01, 04-2(0. 06-12. 12-19 Forming 07-44. 07-51 Fracture

On the mechanism of self gravitating Rossby interfacial waves in proto-stellar accretion discs

NASA Astrophysics Data System (ADS)

Yellin-Bergovoy, Ron; Heifetz, Eyal; Umurhan, Orkan M.

2016-05-01

The dynamical response of edge waves under the influence of self-gravity is examined in an idealised two-dimensional model of a proto-stellar disc, characterised in steady state as a rotating vertically infinite cylinder of fluid with constant density except for a single density interface at some radius ?. The fluid in basic state is prescribed to rotate with a Keplerian profile ? modified by some additional azimuthal sheared flow. A linear analysis shows that there are two azimuthally propagating edge waves, kin to the familiar Rossby waves and surface gravity waves in terrestrial studies, which move opposite to one another with respect to the local basic state rotation rate at the interface. Instability only occurs if the radial pressure gradient is opposite to that of the density jump (unstably stratified) where self-gravity acts as a wave stabiliser irrespective of the stratification of the system. The propagation properties of the waves are discussed in detail in the language of vorticity edge waves. The roles of both Boussinesq and non-Boussinesq effects upon the stability and propagation of these waves with and without the inclusion of self-gravity are then quantified. The dynamics involved with self-gravity non-Boussinesq effect is shown to be a source of vorticity production where there is a jump in the basic state density In addition, self-gravity also alters the dynamics via the radial main pressure gradient, which is a Boussinesq effect. Further applications of these mechanical insights are presented in the conclusion including the ways in which multiple density jumps or gaps may or may not be stable.

Etude numerique et experimentale de la reponse vibro-acoustique des structures raidies a des excitations aeriennes et solidiennes

NASA Astrophysics Data System (ADS)

Mejdi, Abderrazak

Les fuselages des avions sont generalement en aluminium ou en composite renforces par des raidisseurs longitudinaux (lisses) et transversaux (cadres). Les raidisseurs peuvent etre metalliques ou en composite. Durant leurs differentes phases de vol, les structures d'avions sont soumises a des excitations aeriennes (couche limite turbulente : TBL, champs diffus : DAF) sur la peau exterieure dont l'energie acoustique produite se transmet a l'interieur de la cabine. Les moteurs, montes sur la structure, produisent une excitation solidienne significative. Ce projet a pour objectifs de developper et de mettre en place des strategies de modelisations des fuselages d'avions soumises a des excitations aeriennes et solidiennes. Tous d'abord, une mise a jour des modeles existants de la TBL apparait dans le deuxieme chapitre afin de mieux les classer. Les proprietes de la reponse vibro-acoustique des structures planes finies et infinies sont analysees. Dans le troisieme chapitre, les hypotheses sur lesquelles sont bases les modeles existants concernant les structures metalliques orthogonalement raidies soumises a des excitations mecaniques, DAF et TBL sont reexamines en premier lieu. Ensuite, une modelisation fine et fiable de ces structures est developpee. Le modele est valide numeriquement a l'aide des methodes des elements finis (FEM) et de frontiere (BEM). Des tests de validations experimentales sont realises sur des panneaux d'avions fournis par des societes aeronautiques. Au quatrieme chapitre, une extension vers les structures composites renforcees par des raidisseurs aussi en composites et de formes complexes est etablie. Un modele analytique simple est egalement implemente et valide numeriquement. Au cinquieme chapitre, la modelisation des structures raidies periodiques en composites est beaucoup plus raffinee par la prise en compte des effets de couplage des deplacements planes et transversaux. L'effet de taille des structures finies periodiques est egalement pris en compte. Les modeles developpes ont permis de conduire plusieurs etudes parametriques sur les proprietes vibro-acoustiques des structures d'avions facilitant ainsi la tache des concepteurs. Dans le cadre de cette these, un article a ete publie dans le Journal of Sound and Vibration et trois autres soumis, respectivement aux Journal of Acoustical Society of America, International Journal of Solid Mechanics et au Journal of Sound and Vibration Mots cles : structures raidies, composites, vibro-acoustique, perte par transmission.

Retour vers le futur: l'expérience des patients et le lien avec la qualité, la sécurité et le rendement financier.

PubMed

Cochrane, Bonnie S; Hagins, Mitch; King, John A; Picciano, Gino; McCafferty, Maureen M; Nelson, Brian

2015-11-01

Au Canada, l'amélioration de l'expérience des patients est devenue une priorité des politiques de santé. Le perfectionnement et la normalisation des outils et systèmes pour surveiller les mesures de l'expérience des patients augmentent, tandis que la tendance vers une plus grande reddition de compte sur des améliorations durables et abordables se confirme. Pour de nombreux professionnels de la santé, ce phénomène fait foi d'un intérêt renouvelé pour les besoins et priorités fondamentaux des patients, après des décennies où les changements structurels et technologiques ont dominé les programmes de santé. Pour les leaders en santé canadiens, l'amélioration de l'expérience des patients comporte actuellement de grands défis et de belles possibilités. À cet égard, l'expérience des organisations partenaires du groupe Studer au Canada est à la fois pertinente et instructive. Ces organisations ont adopté un modèle, du nom de Evidence-Based Leadership (EBL, ou leadership fondé sur des données probantes), qui favorise et soutient l'harmonisation de l'ensemble des activités et des comportements, conformément à des objectifs organisationnels précis, y compris des améliorations mesurables de l'expérience des patients. Le présent article expose des études de cas d'organisations qui ont adopté l'EBL. Ces organisations ont réalisé des progrès rapides en matière d'indicateurs de l'expérience des patients, ainsi que dans des secteurs essentiels comme les résultats cliniques, la sécurité et le rendement financier. Les données émergentes sur les facteurs et processus qui sous-tendent ces améliorations sont également abordées. © 2015 Collège canadien des leaders en santé

Wirkungen biogener Amine auf die Erregungs-Sekretions-Kopplung in der Speicheldrüse von Periplaneta americana (L.)

NASA Astrophysics Data System (ADS)

Rietdorf, Katja

2003-07-01

In der vorliegenden Arbeit habe ich wichtige Teilmechanismen der Erregungs-Sekretionskopplung in der Speicheldrüse der Schabe Periplaneta americana (L.) untersucht. Die Speicheldrüse ist von dopaminergen und serotonergen Fasern innerviert (Baumann et al., 2002). Beide Transmitter stimulieren eine unterschiedliche Reaktion der Drüse: Dopamin (DA) stimuliert die P-Zellen der Acini und die Ausführgangzellen, während Serotonin (5-HT) die P- und C-Zellen der Acini stimuliert, nicht jedoch die Ausführgangzellen. Der Endspeichel ist nach einer DA-Stimulierung proteinfrei. Dagegen enthält er nach einer 5-HT-Stimulierung Proteine, die von den C-Zellen sezerniert werden (Just & Walz, 1996). Im ersten Teil meiner Arbeit habe ich mittels Kapillarelektrophoretischer Analyse (CE-Analyse) die Elektrolytkonzentrationen im Endspeichel untersucht sowie die Raten der Flüssigkeitssekretion gemessen. Damit wollte ich klären, welche Transporter an der Sekretion des Primärspeichels und an dessen Modifikation beteiligt sind. Ausserdem wollte ich die Rolle der transportaktiven Epithelzellen der Ausführgänge für die Modifikation des Primärspeichels untersuchen. Dafür habe ich einen Vergleich der Elektrolytkonzentrationen im DA- und 5-HT-stimulierten Endspeichel durchgeführt. Der Elektrolytgehalt des DA- und 5-HT-stimulierten Endspeichels unterscheidet sich nicht signifikant voneinander. Er ist nach beiden Stimulierungen hypoosmotisch zum verwendeten Ringer. Die Ausführgangzellen werden durch DA stimuliert und modifizieren den Primärspeichel durch eine netto-Ionenreabsorption. Meine Versuche zeigen jedoch, dass auch die während einer 5-HT-Stimulierung der Drüse unstimulierten Ausführgangzellen den Primärspeichel modifizieren. In einer nachfolgenden Versuchsreihe habe ich den Einfluss von Ouabain, einem Hemmstoff der Na+-K+-ATPase, und Bumetanid, einem Hemmstoff des NKCC, auf die Raten der Flüssigkeitssekretion sowie den Elektrolytgehalt des Endspeichels untersucht. Ich habe gefunden, dass die Aktivität der Na+-K+-ATPase wichtig für die Modifikation des DA-stimulierten Primärspeichels ist. Im Gegensatz dazu ist sie für die Modifikation des 5-HT-stimulierten Primärspeichels nicht von Bedeutung. Bezüglich der Flüssigkeitssekretion habe ich keinen Einfluss der Na+-K+-ATPase-Aktivität auf die DA-stimulierten Sekretionsraten gefunden, dagegen ist die 5-HT-stimulierte Sekretionsrate in Anwesenheit von Ouabain gesteigert. Die Aktivität des NKCC ist für beide sekretorische Prozesse, die Ionen- und die Flüssigkeitssekretion, wichtig. Eine Hemmung des NKCC bewirkt eine signifikante Verringerung der Raten der Flüssigkeitssekretion nach DA- und 5-HT-Stimulierung sowie in beiden Fällen einen signifikanten Abfall der Ionenkonzentrationen im Endspeichel. Im zweiten Teil meiner Arbeit habe ich versucht, Änderungen der intrazellulären Ionenkonzentrationen in den Acinuszellen während einer DA- oder 5-HT-Stimulierung zu messen. Diese Experimente sollten mit der Methode des "ratiometric imaging" durchgeführt werden. Messungen mit dem Ca2+-sensitiven Fluoreszenzfarbstoff Fura-2 zeigten keinen globalen Anstieg in der intrazellulären Ca2+-Konzentration der P-Zellen. Aufgrund von Problemen mit einer schlechten Beladung der Zellen, einer starken und sich während der Stimulierung ändernden Autofluoreszenz der Zellen sowie Änderungen im Zellvolumen wurden keine Messungen mit Na+- und K+-sensitiven Fluoreszenzfarbstoffen durchgeführt. Im dritten Teil dieser Arbeit habe ich die intrazellulären Signalwege untersucht, die zwischen einer 5-HT-Stimulierung der Drüse und der Proteinsekretion vermitteln. Dazu wurde der Proteingehalt im Endspeichel biochemisch mittels eines modifizierten Bradford Assay gemessen. Eine erstellte Dosis-Wirkungskurve zeigt, dass die Rate der Proteinsekretion von der zur Stimulierung verwendeten 5-HT-Konzentration abhängt. In einer Serie von Experimenten habe ich die intrazellulären Konzentrationen von Ca2+, cAMP und / oder cGMP erhöht und anschließend den Proteingehalt im Endspeichel gemessen. Ein Anstieg der intrazellulären Ca2+-Konzentration aktiviert nur eine geringe Rate der Proteinsekretion. Dagegen kann die Steigerung der intrazellulären cAMP-Konzentration eine stärkere Proteinsekretion aktivieren, die sich nicht signifikant von der nach 5-HT-Stimulierung unterscheidet. Die cAMP-stimulierte Proteinsekretion kann durch gleichzeitige Erhöhung der intrazellulären Ca2+-Konzentration weiter gesteigert werden. Dagegen aktivierte eine Erhöhung der intrazellulären cGMP-Konzentration die Proteinsekretion nicht. Aufgrund dieser Ergebnisse postuliere ich die Existenz eines die Adenylatcyclase aktivierenden 5-HT-Rezeptors in der Basolateralmembran der C-Zellen. The aim of this PhD-work was to investigate major mechanisms of excitation-secretion coupling in the salivary gland of the cockroach Periplaneta americana (L.). This salivary gland is innervated by dopaminergic and serotonergic fibres (Baumann et al., 2002). The two transmitters stimulate different processes in the gland: Dopamine (DA) stimulates the p-cells of the acini and the salivary duct cells, whereas 5-HT (serotonin) activates the p- and the c-cells of the acini, but not the salivary duct cells. Final saliva is completely protein-free after dopamine stimulation. It contains proteins, which are secreted by the c-cells of the acini, after a 5-HT-stimulation (Just & Walz, 1996). In the first part of my work I measured the electrolytic composition of the final saliva by capillary electrophoretic analysis and measured the rates of fluid secretion, in order to answer the following questions: 1.) Which transporters affect the production of primary saliva and its modification? 2.) What is the function of the transport-active salivary duct cells for the modification of the primary saliva? Electrolytic composition of the DA- and 5-HT-stimulated final saliva is not significantly different from each other, and is hypoosmotic to the Ringer used. Salivary duct cells are stimulated by DA and modify the primary saliva by a netto ion-reabsorption. My experiments also show that the duct cells, which are unstimulated during a 5-HT-stimulation of the gland, modify the primary saliva. In the next series of experiments I investigated the effects of ouabain, an inhibitor of the Na+-K+-ATPase, and bumetanide, an inhibitor of the NKCC on the rates of fluid secretion and the electrolytic composition of the final saliva. I found, that the activity of the Na+-K+-ATPase is important for the modification of DA-stimulated primary saliva during its flow through the stimulated duct system. In contrast, it is not important for modification of the 5-HT-stimulated primary saliva. Inhibition of the Na+-K+-ATPase does not affect rates of DA-stimulated fluid secretion, but it increases the rates of 5-HT-stimulated fluid secretion. Activity of the NKCC is important for both secretory processes: the ion and the fluid secretion. Inhibition of the NKCC results in a significant drop in the rates of fluid secretion after DA- and 5-HT-stimulation, as well as a drop in electrolytic concentrations in the saliva. In the second part of my work, I tried to measure changes in the intracellular ionic concentrations (Ca2+, Na+, and K+) within the acinar cells during a DA- or 5-HT-stimulation. The experiments should be performed by ratiometric imaging. Measurements with the Ca2+-sensitive dye Fura-2 did not show any global increase in the intracellular Ca2+-concentration in the p-cells of the acini. Problems concerning a bad loading of the cells, a strong autofluorescence which changed during the time course of the stimulation, as well as changes in the cell volume were the reason, that no measurements using Na+- or K+-sensitive dyes were performed. In the third part of my work I investigated the intracellular signalling pathways, which activate protein secretion after 5-HT-stimulation of the gland. A modified Bradford Assay was used for measuring the protein content in the final saliva. In a dose-response curve I showed that rates of protein secretion are dependent on the 5-HT-concentrations used to stimulate the glands. In another set of experiments I increased the intracellular concentrations of Ca2+, cAMP and / or cGMP, and measured the protein content in the final saliva. An increase in the intracellular Ca2+-concentration activates only a low rate of protein secretion. After an increase in the intracellular cAMP-concentration a much higher rate of protein secretion can be activated, which is not significantly different from the 5-HT stimulated rate of protein secretion. The cAMP-stimulated protein secretion can be further increased by a simultaneous rise in the intracellular Ca2+-concentration. In contrast, cGMP does not activate protein secretion. Therefore I propose the expression of an adenylyl cyclase activating 5-HT-receptor in the basolateral membrane of the protein secreting c-cells.

Electrically switchable polymer stabilised broadband infrared reflectors and their potential as smart windows for energy saving in buildings.

PubMed

Khandelwal, Hitesh; Loonen, Roel C G M; Hensen, Jan L M; Debije, Michael G; Schenning, Albertus P H J

2015-07-01

Electrically switchable broadband infrared reflectors that are relatively transparent in the visible region have been fabricated using polymer stabilised cholesteric liquid crystals. The IR reflectors can change their reflection/transmission properties by applying a voltage in response to changes in environmental conditions. Simulations predict that a significant amount of energy can be saved on heating, cooling and lighting of buildings in places such as Madrid by using this switchable IR reflector. We have also fabricated a switchable IR reflector which can also generate electricity. These polymer based switchable IR reflectors are of high potential as windows of automobiles and buildings to control interior temperatures and save energy.

Electrically switchable polymer stabilised broadband infrared reflectors and their potential as smart windows for energy saving in buildings

PubMed Central

Khandelwal, Hitesh; Loonen, Roel C. G. M.; Hensen, Jan L. M.; Debije, Michael G.; Schenning, Albertus P. H. J.

2015-01-01

Electrically switchable broadband infrared reflectors that are relatively transparent in the visible region have been fabricated using polymer stabilised cholesteric liquid crystals. The IR reflectors can change their reflection/transmission properties by applying a voltage in response to changes in environmental conditions. Simulations predict that a significant amount of energy can be saved on heating, cooling and lighting of buildings in places such as Madrid by using this switchable IR reflector. We have also fabricated a switchable IR reflector which can also generate electricity. These polymer based switchable IR reflectors are of high potential as windows of automobiles and buildings to control interior temperatures and save energy. PMID:26132328

Remediation by in-situ solidification/stabilisation of Ardeer landfill, Scotland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wyllie, M.; Esnault, A.; Barker, P.

1997-12-31

The Ardeer Landfill site at ICI Explosives factory on the west coast of Scotland had been a repository for waste from the site for 40 years. In order to safeguard the local environment ICI Explosives, with approval of Local Authorities and the Clyde River Purification Board put into action a programme of investigation and planning which culminated in the in-situ treatment of 10,000 m3 of waste within the landfill by a deep mixing method using the {open_quotes}Colmix{close_quotes} system. The paper describes in varying degrees of detail the remediation from investigation to the execution of the in-situ stabilisation and presents themore » post construction monitoring results.« less

One-stage lengthening and derotational osteotomy of the femur stabilised with a gamma nail.

PubMed

van Doorn, R; Leemans, R; Stapert, J W

1999-12-01

To study the results of a one-stage lengthening and derotational osteotomy stabilised with a Gamma nail. Retrospective study. 2 hospitals, The Netherlands. 5 patients after failed osteosynthesis of femoral fractures. Mean lengthening of 3 cm and derotation of 30 degrees. Complications and functional results, after a mean follow-up of 43 months (range 30-57). Two patients required dynamisation and a cancellous bone graft to achieve union, which resulted in 1 and 1.5 cm loss of length. One patient had a temporary peroneal neurapraxy. No infections were observed. Our method is not an ultimate solution, but is suitable for one-stage lengthening and derotation osteotomies.

Preface: Materiaux 2010

NASA Astrophysics Data System (ADS)

Cheikhrouhou, Abdelwaheb

2012-02-01

The national conference 'MATERIAUX 2010', which took place in Mahdia (Tunisia), from 4-7 November 2010 was organized by The 'Tunisian Materials Research Society: Tu-MRS' in collaboration with the Materials Physics Laboratory of Sfax 'LPM', Faculty of Sciences, Sfax University and the Research Unit ' Physique, Informatique et Mathématiques ', Faculty of Sciences, Gafsa University The First National Conference on Materials 'MATERIAUX 2006' was organized in Douz (Tunisia) in December 2006. This was followed by 'MATERIAUX 2007' held in Hammamet (Tunisia) in April 2007 and the National Conference 'MATERIAUX 2009' organized jointly with the Second 'Journées Internationales de la Physique des Matériaux et Applications: JIPMA 2009' in Gafsa (Tunisia) from 20-24 December 2009. 'MATERIAUX 2010' is intended to provide an excellent opportunity for National, Maghreb and International researchers to make their own work on materials known to a wider audience and to have discussions with other participants. This conference will also be an opportunity to exchange experiences, create and consolidate cooperation between different research structures in the Maghreb countries and also the countries around the Mediterranean. This conference will equally promote research development, contribution to collaboration between universities and the socio-economical milieu. More than 300 senior researchers, Professors, PhD and Masters students attended this conference from Tunisia, Algeria, Morocco, France, Spain and Canada. Several researchers, engineers and managers from industrial firms also attended. The conference consisted of plenary talks (8), oral contributions (40) and poster presentations (250). The topics of the Conference were: Nano-materials, nano-systems, thin films, surfaces and interfaces, applications Multifunctionnal materials, magnetic materials, dielectric materials, superconducting materials, applications,... Materials for electronics, informatics and communication Ceramics, glasses, polymers Natural materials (phosphates, clay,...) Metallic materials, alloys, metallurgy,... Others (materials and environment, materials and energy, biomaterials,...) I want to thank the scientific committee, the organizing committee, the local committee and everyone who contributed to the organization of this meeting for their invaluable efforts in order to guarantee the complete success of this conference. Abdelwaheb Cheikhrouhou President of 'Tu-MRS' Chairman of the Conference 'MATERIAUX 2010' Conference photograph Committies Organizing Committee Chairman CHEIKHROUHOU Abdelwaheb (Faculté des Sciences de Sfax) Members ALAYA Sahbi (Faculté des Sciences de Gabès) BENNACEUR Raouf (Faculté des Sciences de Tunis) BEN SALEM Mohamed (Faculté des Sciences de Bizerte) CHEIKHROUHOU-KOUBAA Wissem (Faculté des Sciences de Sfax) EL JANI Belgacem (Faculté des Sciences de Monastir) EZZAOUIA Hatem (Centre de Recherches et de Technologies de l'Energie, Technopole de Borj Cédria) LAMLOUMI Jilani (Ecole Supérieure des Sciences et Techniques de Tunis) REZIG Bahri (Ecole Nationale d'Ingénieurs de Tunis) Local Committee Chairman CHEIKHROUHOU Abdelwaheb (Faculté des Sciences de Sfax) Members CHEIKHROUHOU-KOUBAA Wissem (Faculté des Sciences de Sfax) KOUBAA Mohamed (Institut Supérieur de Biotechnologie de Sfax) NJEH Anwar (Institut Préparatoire aux Etudes d'Ingénieurs de Sfax) BEN SALAH Issam (Faculté des Sciences de Sfax) TAKKALI Férid (Faculté des Sciences de Sfax) REGAIEG Yassin (Faculté des Sciences de Sfax) OTHMANI Safa (Faculté des Sciences de Sfax) MNASSRI Rafik (Faculté des Sciences de Sfax) Secretariat BEN GHOZLEN Afifa (Faculté des Sciences de Sfax) BOUGHARIOU Sana (Faculté des Sciences de Sfax) Scientific Committee M. ADDOU, Faculté des Sciences de Kénitra (Morocco) N. AMDOUNI, Faculté des Sciences de Tunis (Tunisia) M. BACCOUCHE, Faculté des Sciences d'Annaba (Algeria) H. BATIS, Faculté des Sciences de Tunis (Tunisia) A. BELAFHAL, Faculté des Sciences d'El Jadida (Morocco) M.H. BEN GHOZLEN, Faculté des Sciences de Sfax (Tunisia) R. BENNACEUR, Faculté des Sciences de Tunis (Tunisia) B. BENYOUCEF, Université Abou Bakr Belkaid, Tlemcen (Algeria) M. BEN SALEM, Faculté des Sciences de Bizerte (Tunisia) B. BESSAIES, Centre de Recherches et Technologies de l'Energie (Tunisia) H. BOUCHRIHA, Faculté des Sciences de Tunis (Tunisia) W. BOUJELBEN, Faculté des Sciences de Sfax (Tunisia) A. CHEIKHROUHOU, Faculté des Sciences de Sfax (Tunisia) W. CHEIKHROUHOU-KOUBAA, Faculté des Sciences de Sfax (Tunisia) R. CHTOUROU, Centre de Recherches et Technologies de l'Energie (Tunisia) M. DEBBABI, Ecole Nationale d'Ingénieurs de Monastir (Tunisia) A. DAKHLAOUI, Faculté des Sciences de Bizerte (Tunisia) A. DINIA, Université de Strasbourg (France) B. ELJANI, Faculté des Sciences de Monastir (Tunisia) A. ELJAZOULI, Faculté des Sciences Ben Msik, Casablanca (Morocco) Z. FAKHFAKH, Faculté des Sciences de Sfax (Tunisia) A. GASMI, Faculté des Sciences d'Annaba (Algeria) A. GHARBI, Faculté des Sciences de Tunis (Tunisia) R. GHARBI, Faculté des Sciences de Sfax (Tunisia) K. GUIDARA, Faculté des Sciences de Sfax (Tunisia) H. GUERMAZI, Institut Préparatoire aux Etudes d'Ingénieurs de Sfax (Tunisia) S. GUERMAZI, Faculté des Sciences de Sfax (Tunisia) M. HADDAD, Faculté des Sciences de Meknès (Morocco) A. HAJ AMARA, Faculté des Sciences de Bizerte (Tunisia) D. HAMANA, Faculté des Sciences de Constantine (Algeria) N. KAMOUN, Faculté des Sciences de Tunis (Tunisia) S. KADDOUR-CHARFI, Faculté des Sciences de Tunis (Tunisia) M. KADDOUR, Faculté des Sciences de Sfax (Tunisia) M. KHITOUNI, Faculté des Sciences de Sfax (Tunisia) T. MHIRI, Faculté des Sciences de Sfax (Tunisia) Y. MLIK, Institut Préparatoire aux Etudes Scientifiques et Techniques (Tunisia) N. MLIKI, Faculté des Sciences de Tunis (Tunisia) A. NJAH, Faculté des Sciences de Gafsa (Tunisia) M. OUESLATI, Faculté des Sciences de Tunis (Tunisia) K. ZELLAMA, Faculté des Sciences d'Amiens (France) Invited Speakers AMMAR-MERIAH Souad, ITODYS, Université Paris Diderot (France) BEN SALEM Mohamed, Faculté des Sciences de Bizerte, Université du 7 Novembre á Carthage (Tunisia) CHEIKHROUHOU Abdelwaheb, Faculté des Sciences de Sfax, Université de Sfax (Tunisia) DAKHLAOUI Amel, Faculté des Sciences de Bizerte, Université du 7 Novembre á Carthage (Tunisia) DJABBAR Ahmed, Université des Sciences et des Technologies de Lille (France) DURASTANTI Félix, Centre d'Etudes et Recherche en Thermique, Environnement et Systèmes (C.E.R.T.E.S.), Université Paris Est- Créteil (France) FERY-FORGUES Suzanne, Université Paul Sabatier, Toulouse (France) GIRAUD Romain, Laboratoire de Photonique et de Nanostructures, CNRS/LPN, Marcoussis (France)

Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

NASA Astrophysics Data System (ADS)

Veres, Teodor

Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques et ceci en fonction de l'epaisseur de la couche magnetique de Co. Nous verrons que dans ces systemes les effets de l'irradiation ionique sont fortement influences par l'energie de surface ainsi que par l'enthalpie de formation, largement positive pour le systeme Co/Ag.

Computational studies of horizontal axis wind turbines in high wind speed condition using advanced turbulence models

NASA Astrophysics Data System (ADS)

Benjanirat, Sarun

Next generation horizontal-axis wind turbines (HAWTs) will operate at very high wind speeds. Existing engineering approaches for modeling the flow phenomena are based on blade element theory, and cannot adequately account for 3-D separated, unsteady flow effects. Therefore, researchers around the world are beginning to model these flows using first principles-based computational fluid dynamics (CFD) approaches. In this study, an existing first principles-based Navier-Stokes approach is being enhanced to model HAWTs at high wind speeds. The enhancements include improved grid topology, implicit time-marching algorithms, and advanced turbulence models. The advanced turbulence models include the Spalart-Allmaras one-equation model, k-epsilon, k-o and Shear Stress Transport (k-o-SST) models. These models are also integrated with detached eddy simulation (DES) models. Results are presented for a range of wind speeds, for a configuration termed National Renewable Energy Laboratory Phase VI rotor, tested at NASA Ames Research Center. Grid sensitivity studies are also presented. Additionally, effects of existing transition models on the predictions are assessed. Data presented include power/torque production, radial distribution of normal and tangential pressure forces, root bending moments, and surface pressure fields. Good agreement was obtained between the predictions and experiments for most of the conditions, particularly with the Spalart-Allmaras-DES model.

Detached eddy simulation for turbulent fluid-structure interaction of moving bodies using the constraint-based immersed boundary method

NASA Astrophysics Data System (ADS)

Nangia, Nishant; Bhalla, Amneet P. S.; Griffith, Boyce E.; Patankar, Neelesh A.

2016-11-01

Flows over bodies of industrial importance often contain both an attached boundary layer region near the structure and a region of massively separated flow near its trailing edge. When simulating these flows with turbulence modeling, the Reynolds-averaged Navier-Stokes (RANS) approach is more efficient in the former, whereas large-eddy simulation (LES) is more accurate in the latter. Detached-eddy simulation (DES), based on the Spalart-Allmaras model, is a hybrid method that switches from RANS mode of solution in attached boundary layers to LES in detached flow regions. Simulations of turbulent flows over moving structures on a body-fitted mesh incur an enormous remeshing cost every time step. The constraint-based immersed boundary (cIB) method eliminates this operation by placing the structure on a Cartesian mesh and enforcing a rigidity constraint as an additional forcing in the Navier-Stokes momentum equation. We outline the formulation and development of a parallel DES-cIB method using adaptive mesh refinement. We show preliminary validation results for flows past stationary bodies with both attached and separated boundary layers along with results for turbulent flows past moving bodies. This work is supported by the National Science Foundation Graduate Research Fellowship under Grant No. DGE-1324585.

Aerodynamic Analysis of a Hale Aircraft Joined-Wing Configuration

NASA Astrophysics Data System (ADS)

Sivaji, Rangarajan; Ghia, Urmila; Ghia, Karman; Thornburg, Hugh

2003-11-01

Aerodynamic analysis of a high-aspect ratio, joined wing of a High-Altitude Long Endurance (HALE) aircraft is performed. The requirement of high lift over extended flight periods for the HALE aircraft leads to high-aspect ratio wings experiencing significant deflections necessitating consideration of aeroelastic effects. The finite-volume solver COBALT, with Reynolds-averaged Navier-Stokes (RANS) and Detached Eddy Simulation (DES) capabilities, is used for the flow simulations. Calculations are performed at á = 0° and 12° for M = 0.6, at an altitude of 30,000 feet, at a Re per unit length of 5.6x106. The wing cross sections are NACA 4421 airfoils. Because of the high lift-to-drag ratio wings, an inviscid flow analysis is also performed. The inviscid surface pressure coefficient (Cp) is compared with the corresponding viscous Cp to examine the feasibility of the use of the inviscid pressure loads as an estimate of the total fluid loads on the structure. The viscous and inviscid Cp results compare reasonably only at á = 0°. The viscous flow is examined in detail via surface and field velocity vectors, vorticity, density and pressure contours. For á = 12°, the unsteady DES solutions show a weak shock at the aft-wing trailing edge. Also, the flow near the joint exhibits a region of mild separation.

Sondes radicalaires pour l'imagerie RPE et PDN stables dans les fluides biologiques

NASA Astrophysics Data System (ADS)

Guiberteau, T.; Marx, L.; Rassat, A.; Grucker, D.

1999-10-01

Electron paramagnetic resonance and dynamic nuclear polarisation are two techniques that allow the detection of free radicals. They can also be used for in vivo studies for oximetry in blood or tissues. One of the main problems for the development of these techniques is the need of free radicals that are stable in biological media. We present in this communication a study by EPR and DNP of two free radicals that can be suitable for in vivo applications. La résonance paramagnétique électronique et la polarisation dynamique nucléaire sont deux techniques qui permettent de détecter les radicaux libres dans divers systèmes. Elles peuvent également être utilisées in vivo et permettre ainsi de mesurer la concentration en oxygène dans le sang ou dans les tissus. Un des problèmes de ces techniques est l'utilisation de sondes radicalaires suffisamment stables dans les milieux biologiques. Nous présentons une étude comparative par RPE et PDN de deux radicaux libres de type nitroxydes dérivés de l'isoindoline. Un des radicaux possédant quatre groupements éthyle semble être intéressant pour le développement de la RPE et la PDN in vivo.

Influence de l'effet de peau sur la rotation d'un rotor fluide

NASA Astrophysics Data System (ADS)

Witkowski, L. Martin; Marty, Ph.

1998-01-01

A rotating magnetic field creates forces in a liquid metal column which therefore rotates. In the case of an infinitely long column, we solve the induction and Navier-Stokes equations. The results are described for the fully coupled case which arises when the Hartmann number Ha and the shield parameter R_{ω} are larger than unity. In this case, we distinguish between two velocity regimes upon the value of R_{ω} with respect to frac{Ha}{sqrt{2}}. Un champ magnétique tournant autour d'une colonne de métal liquide crée des forces qui la mettent en rotation. Dans le cas d'une colonne de hauteur infinie, il est proposé une méthode de résolution des équations couplées régissant la distribution du champ magnétique et du champ de vitesse. Les résultats sont détaillés quand le couplage est fort ce qui correspond à un nombre de Hartmann Ha et un paramètre d'écran R_{ω} grands devant l'unité. Dans ce cas, pour Ha donné, deux régimes apparaissent pour le champ de vitesse suivant que R_{ω} est supérieur ou inférieur à frac{Ha}{sqrt{2}}.

Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

NASA Astrophysics Data System (ADS)

Fall, H.; Charon, W.; Kouta, R.

2002-12-01

Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

Diethylstilbestrol-Induced Mouse Hypospadias: “Window of Susceptibility”

PubMed Central

Sinclair, Adriane Watkins; Cao, Mei; Baskin, Laurence; Cunha, Gerald R.

2016-01-01

Hypospadias, an abnormality affecting the penile urethra, is one of the most prevalent congenital malformations afflicting human males. The morphology of hypospadias is markedly different in humans versus mice reflecting substantial differences in penile development in humans and mice. Estrogens such as diethylstilbestrol (DES) elicit mouse penile malformations, but the types of penile abnormalities differ depending on whether DES treatment is prenatal or neonatal. To define the actual “window of susceptibility” to the adverse effects of DES, pregnant mice and their neonatal pups were injected subcutaneously with 200ng/gbw DES every other day from embryonic day 12 to 18 (DES E12-E18), postnatal day 0 to 10 (DES P0-P10), embryonic day 12 to postnatal day 10 (DES E12 to P10), postnatal day 5 to 15 (DES P5 to P15), and postnatal day 10 to 20 (DES P10 to P20). Aged-matched controls received sesame oil vehicle. After euthanasia at 10, 15, 20 and 60 days, penises were analyzed by gross morphology, histology and morphometry. Penises of all 5 groups of DES-treated mice were reduced in size, which was confirmed by morphometric analysis of internal penile structures. The most profound effects were seen in the DES E12-P10, DES P0-P10, and DES P5-P15 groups, thus defining a DES “programming window”. For all parameters, DES treatment from P10-P20 showed the most mild of effects. Adverse effects of DES on the MUMP cartilage and erectile bodies observed shortly after the last DES injection reverted to normality in the DES P5-P15, but not in the E12-P10 and P0-P10 groups, in which MUMP cartilage and erectile body malformations persisted into adulthood, again emphasizing a “window of susceptibility” in the early neonatal period. PMID:26810244

La manucure et la pédicure dans la ville de Ouagadougou (Burkina Faso): pratiques et risqué

PubMed Central

Korsaga-Somé, Nina; Andonaba, Jean Baptiste; Ouédraogo, Muriel Sidnoma; Tapsoba, Gilbert Patrice; Ilboudo, Léopold; Savadogo, Cérina; Barro-Traoré, Fatou; Niamba, Pascal; Traoré, Adama

2016-01-01

La manucure-pédicure est l'ensemble des soins esthétiques des mains, des pieds et des ongles. Au Burkina Faso, l'usage des produits de manucure-pédicure, les techniques utilisées ainsi que les risques encourus restent méconnus. L'objectif de notre étude était d’évaluer la pratique de la manucure-pédicure dans la ville de Ouagadougou. Nous avons mené une étude transversale descriptive de décembre 2010 à novembre 2012 incluant tout les praticiens ayant au moins six mois d'expérience dans l'activité et les clients présents sur les lieux au moment de l'enquête. Nous avons interrogé au total 313 praticiens et 313 clients. L’âge moyen des praticiens était de 19 ans et celui des clients de 32,2 ans. Les praticiens fixes étaient en majorité des femmes (96,87%), ceux mobiles surtout des hommes (68,37%), et 64,53% des clients étaient des femmes. Le pourcentage de praticiens n'ayant pas reçu de formation professionnelle était de 93,92%. 29,7% des praticiens faisaient tremper les instruments pendant au moins dix minutes dans de l'eau de javel; 75,71% savaient que l'utilisation de certains outils étaient dangereux et 26,51% étaient avaient présenté des effets secondaires. Parmi les clients, 40,25% savaient que le matériel utilisé comportait des risques et 30,35% avaient été victimes d'accidents. Les soins de manucure et de pédicure se font dans les salons de coiffure par des coiffeuses non formées à l'exercice de la profession La provenance et la composition des produits n'est pas connues. Des produits non recommandés sont utilisés (shampooing pour trempage des pieds, lame de rasoir et ciseaux pour raclage des pieds). Le recours à la manucure et/ou pédicure est parfois nécessaire mais cela ne doit pas faire perdre de vue les risques encourus. Une sensibilisation des clients et une formation des praticiens semblent nécessaires pour minimiser les risques. PMID:27642448

La prise en charge des troubles de santé mentale par les omnipraticiens du Québec

PubMed Central

Fleury, Marie-Josée; Farand, Lambert; Aubé, Denise; Imboua, Armelle

2012-01-01

Résumé Objectif Cette recherche vise à documenter la prise en charge des troubles mentaux (TM) par les omnipraticiens. Type d’étude Il s’agit d’une étude mixte intégrant un questionnaire auto-administré et des entrevues qualitatives. La banque de données administratives des actes médicaux de la Régie de l’assurance maladie du Québec a aussi été analysée. Contexte La province de Québec. Participants Un total de 1415 omnipraticiens de différents lieux de pratiques ont été sollicités pour le questionnaire; 970 ont été rejoints. Un sous-groupe de 60 omnipraticiens a été rejoint pour les entrevues. Principaux paramètres à l'étude La prévalence annuelle des consultations reliées à des TM courants (TMC) ou graves (TMG), les pratiques cliniques, les pratiques de collaboration, les facteurs facilitant ou entravant la prise en charge des TM, ainsi que les recommandations pour l’amélioration du système de soins. Résultats Le taux de réponse a été de 41% (n = 398 omnipraticiens) pour le questionnaire et de 63% (n = 60) pour les entrevues. Environ 25 % des visites chez les omnipraticiens sont associées à des TM. Presque tous les omnipraticiens prennent en charge des TMC et se sentent compétents pour le faire, à l’inverse de la situation retrouvée pour les TMG. Près de 20 % des TMC sont référés (principalement à des intervenants psychosociaux), alors que près de 75 % des TMG sont référés (surtout en psychiatrie et à l’urgence). Plus de 50 % des omnipraticiens affirment n’entretenir aucun contact avec l’une ou l’autre des ressources de santé mentale. Plusieurs facteurs influencent la prise en charge des TM: les profils des patients (complexité des TM, troubles concomitants); les caractéristiques des omnipraticiens (réseau informel, formation); la culture professionnelle (travail en silo, mécanismes cliniques formalisés); le milieu institutionnel (multidisciplinarité, salariat); l’organisation des services (ressources; coordination formalisée) et l’environnement (politiques). Conclusion Le rôle clé des omnipraticiens et leur soutien à la prise en charge des TM ont été démontrés, spécifiquement pour les TMC. Pour une prise en charge optimale des soins primaires de santé mentale, des stratégies à composantes multiples, dont les soins partagés, devraient être davantage déployées.

Alkali activated solidification/stabilisation of air pollution control residues and co-fired pulverised fuel ash.

PubMed

Shirley, Robin; Black, Leon

2011-10-30

This paper examines the potential treatment by solidification/stabilisation (S/S) of air pollution control (APC) residues using only waste materials otherwise bound for disposal, namely a pulverised fuel ash (PFA) from a co-fired power station and a waste caustic solution. The use of waste materials to stabilise hazardous wastes in order to meet waste acceptance criteria (WAC) would offer an economical and efficient method for reducing the environmental impact of the hazardous waste. The potential is examined against leach limits for chlorides, sulphates and total dissolved solids, and compressive strength performance described in the WAC for stable non-reactive (SNR) hazardous waste landfill cells in England and Wales. The work demonstrates some potential for the treatment, including suitable compressive strengths to meet regulatory limits. Monolithic leach results showed good encapsulation compared to previous work using a more traditional cement binder. However, consistent with previous work, SNR WAC for chlorides was not met, suggesting the need for a washing stage. The potential problems of using a non-EN450 PFA for S/S applications were also highlighted, as well as experimental results which demonstrate the effect of ionic interactions on the mobility of phases during regulatory leach testing. Copyright © 2011 Elsevier B.V. All rights reserved.

Median sternotomy and ventral stabilisation using pins and polymethylmethacrylate for a comminuted T5 vertebral fracture in a Miniature Schnauzer.

PubMed

Guiot, L P; Allman, D A

2011-01-01

A 2.9 kg Miniature Schnauzer was referred to our clinic, the Emergency & Critical Care Medicine Service at the Michigan State University Veterinary Teaching Hospital, following a dog fight. Physical examination findings upon admission included multiple thoracic wounds, absence of hindlimb deep pain, and marked Schiff-Sherrington syndrome. Computed tomography imaging revealed thoracic wall penetration and a comminuted T5 vertebral fracture. Thoracic exploration and thoracic wall repair were performed through a median sternotomy. The vertebral fracture was exposed and stabilised intra-thoracically through the same approach using pins and polymethylmethacrylate. The pins were placed percutaneously into the vertebral bodies of the adjacent vertebrae. Recovery was uncomplicated and fracture healing was documented eight weeks postoperatively. Spinal trauma secondary to dog fights is relatively common. The presence of concurrent penetrating thoracic injury negatively affects prognosis and necessitates thoracic exploration as soon as feasible. The approach should allow complete thoracic exploration to repair parietal and visceral damage, thus indicating the need for median sternotomy rather than an intercostal approach. The present case report suggested that median sternotomy can be used to safely apply stabilisation devices for the treatment of concurrent spinal trauma. Direct visualisation of the vertebral bodies permitted optimal implant anchorage as compared to potentially more hazardous techniques such as dorsal pinning.

Stabilisation of cables of fibronectin with micromolar concentrations of copper: in vitro cell substrate properties.

PubMed

Ahmed, Zubair; Briden, Anita; Hall, Susan; Brown, Robert A

2004-02-01

We have previously described the production of large cables of fibronectin, a large extracellular matrix cell adhesion glycoprotein, which has a potential application in tissue engineering. Here we have stabilised these cables for longer survival and looked at their ultrastructural cell-substrate behaviour in vitro. Dissolution experiments showed that low concentrations of copper not only caused significant material stabilisation but left pores which could promote cell ingrowth, as we have previously reported with Fn-mats. Indeed, the greatest amount of cell ingrowth was observed for copper treated cables. Immunostaining showed S-100(+) multi-layers of cells around the edge of cables while ultrastructural analysis confirmed the presence of a mixture of fibroblasts and bipolar cells associated with fragments of basal lamina, which is a Schwann cell phenotype. Interestingly, the outermost layers of cells consisted of S-100(-) cells, presumed fibroblasts, apparently 'capping' the Schwann cells. Toxicity tests revealed that Schwann cells were only able to grow at the lowest concentration of copper used (1microM) while fibroblasts grew at all concentrations tested. These results could be used to design biomaterials with optimum properties for promoting cellular ingrowth and survival in tissue engineered grafts which may be used to improve peripheral nerve repair.

Sludge digestion instead of aerobic stabilisation - a cost benefit analysis based on experiences in Germany.

PubMed

Gretzschel, Oliver; Schmitt, Theo G; Hansen, Joachim; Siekmann, Klaus; Jakob, Jürgen

2014-01-01

As a consequence of a worldwide increase of energy costs, the efficient use of sewage sludge as a renewable energy resource must be considered, even for smaller wastewater treatment plants (WWTPs) with design capacities between 10,000 and 50,000 population equivalent (PE). To find the lower limit for an economical conversion of an aerobic stabilisation plant into an anaerobic stabilisation plant, we derived cost functions for specific capital costs and operating cost savings. With these tools, it is possible to evaluate if it would be promising to further investigate refitting aerobic plants into plants that produce biogas. By comparing capital costs with operation cost savings, a break-even point for process conversion could be determined. The break-even point varies depending on project specific constraints and assumptions related to future energy and operation costs and variable interest rates. A 5% increase of energy and operation costs leads to a cost efficient conversion for plants above 7,500 PE. A conversion of WWTPs results in different positive effects on energy generation and plant operations: increased efficiency, energy savings, and on-site renewable power generation by digester gas which can be used in the plant. Also, the optimisation of energy efficiency results in a reduction of primary energy consumption.

Laboratory investigation of TerraZyme as a soil stabilizer

NASA Astrophysics Data System (ADS)

Yusoff, Siti Aimi Nadia Mohd; Azmi, Mastura; Ramli, Harris; Bakar, Ismail; Wijeyesekera, D. C.; Zainorabidin, Adnan

2017-10-01

In this study, a laboratory investigation was conducted to examine the performance of TerraZyme on different soil types. Laterite and kaolin were treated with 2% and 5% TerraZyme to determine changes in the soils' geotechnical properties. The obtained results were analysed and investigated in terms of compaction, Unconfined Compressive Strength (UCS) and California Bearing Ratio (CBR). The changes in geotechnical properties of the stabilised and unstabilised soils were monitored after curing periods of 0, 7, 15, 21 and 30 days. Changes in compaction properties, UCS and CBR were observed. It was found that laterite with 5% TerraZyme gave a higher maximum dry density (MDD) and decreased the optimum moisture content (OMC). For kaolin, a different TerraZyme percentage did not show any effect on both MDD and OMC. For strength properties, it was found that 2% TerraZyme showed the greatest change in UCS over a 30-day curing period. The CBR value of stabilised kaolin with 2% TerraZyme gave a higher CBR value than the kaolin treated with 5% TerraZyme. It was also found that laterite treated with TerraZyme gave a higher CBR value. Lastly, it can be concluded that TerraZyme is not suitable for stabilising kaolin; TerraZyme requires a cohesive soil to achieve a better performance.

Effect of clinical response to active drugs and placebo on antipsychotics and mood stabilizers relative efficacy for bipolar depression and mania: A meta-regression analysis.

PubMed

Bartoli, Francesco; Clerici, Massimo; Di Brita, Carmen; Riboldi, Ilaria; Crocamo, Cristina; Carrà, Giuseppe

2018-04-01

Randomised placebo-controlled trials investigating treatments for bipolar disorder have been hampered by wide variations of active drugs and placebo clinical response rates. It is important to estimate whether the active drug or placebo response has a greater influence in determining the relative efficacy of drugs for psychosis (antipsychotics) and relapse prevention (mood stabilisers) for bipolar depression and mania. We identified 53 randomised, placebo-controlled trials assessing antipsychotic or mood stabiliser monotherapy ('active drugs') for bipolar depression or mania. We carried out random-effects meta-regressions, estimating the influence of active drugs and placebo response rates on treatment relative efficacy. Meta-regressions showed that treatment relative efficacy for bipolar mania was influenced by the magnitude of clinical response to active drugs ( p=0.002), but not to placebo ( p=0.60). On the other hand, treatment relative efficacy for bipolar depression was influenced by response to placebo ( p=0.047), but not to active drugs ( p=0.98). Despite several limitations, our unexpected findings showed that antipsychotics / mood stabilisers relative efficacy for bipolar depression seems unrelated to active drugs response rates, depending only on clinical response to placebo. Future research should explore strategies to reduce placebo-related issues in randomised, placebo-controlled trials for bipolar depression.

[Preliminary study on the action of hypopressive gymnastics in the treatment of idiopathic scoliosis].

PubMed

Caufriez, Marcel; Fernández-Domínguez, Juan Carlos; Brynhildsvoll, Nils

2011-01-01

Our goal is to describe the results of a hypopressive gymnastics (HG) program applied to 3 children with idiopathic scoliosis. Three children (ages ranging from 8 to 15 years) suffering from idiopathic scoliosis were recruited for this study. Thoracic or thoracolumbar curves showed between 15° and 40° Cobb degrees. The evolutionary character of the curves had been confirmed. A study of different clinical and radiological parameters was carried out to compare the measurements before and after (3 months later) the application of a 5 HG daily exercises programme: A radiological study of the spine was carried out to compare the measurements of the vertebral rotation. A radiological study, a plumb line and a measuring tape were used to assess the vertebral tilt in this study. A Scoliometer was used to measure the deformation of the rib cage (gibbosity). The most significant results were: a trend to reach stabilisation in the vertebral tilt and rotation, and stabilisation of gibbosity, which probably might improve the respiratory function of these subjects. Finally, the performance of an ordinary HG exercise program shows a trend to control and stabilise dorsal idiopathic scoliosis progression. Copyright © 2010 Elsevier España, S.L. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miles, Andrew J.; Fedosova, Natalya U.; Hoffmann, Søren V.

Highlights: •Ouabain binding to pig and shark Na,K-ATPase enhances thermal stability. •Ouabain stabilises both membrane-bound and solubilised Na,K-ATPase. •Synchrotron radiation circular dichroism is used for structure determination. •Secondary structure in general is not affected by ouabain binding. •Stabilisation is due to re-arrangement of tertiary structure. -- Abstract: Cardiotonic steroids such as ouabain bind with high affinity to the membrane-bound cation-transporting P-type Na,K-ATPase, leading to complete inhibition of the enzyme. Using synchrotron radiation circular dichroism spectroscopy we show that the enzyme-ouabain complex is less susceptible to thermal denaturation (unfolding) than the ouabain-free enzyme, and this protection is observed with Na,K-ATPase purifiedmore » from pig kidney as well as from shark rectal glands. It is also shown that detergent-solubilised preparations of Na,K-ATPase are stabilised by ouabain, which could account for the successful crystallisation of Na,K-ATPase in the ouabain-bound form. The secondary structure is not significantly affected by the binding of ouabain. Ouabain appears however, to induce a reorganization of the tertiary structure towards a more compact protein structure which is less prone to unfolding; recent crystal structures of the two enzymes are consistent with this interpretation. These circular dichroism spectroscopic studies in solution therefore provide complementary information to that provided by crystallography.« less

Concept for tremor compensation for a handheld OCT-laryngoscope

NASA Astrophysics Data System (ADS)

Donner, Sabine; Deutsch, Stefanie; Bleeker, Sebastian; Ripken, Tammo; Krüger, Alexander

2013-06-01

Optical coherence tomography (OCT) is a non-invasive imaging technique which can create optical tissue sections, enabling diagnosis of vocal cord tissue. To take full advantage from the non-contact imaging technique, OCT was adapted to an indirect laryngoscope to work on awake patients. Using OCT in a handheld diagnostic device the challenges of rapid working distance adjustment and tracking of axial motion arise. The optical focus of the endoscopic sample arm and the reference-arm length can be adjusted in a range of 40 mm to 90 mm. Automatic working distance adjustment is based on image analysis of OCT B-scans which identifies off depth images as well as position errors. The movable focal plane and reference plane are used to adjust working distance to match the sample depth and stabilise the sample in the desired axial position of the OCT scans. The autofocus adjusts the working distance within maximum 2.7 seconds for the maximum initial displacement of 40 mm. The amplitude of hand tremor during 60 s handheld scanning was reduced to 50 % and it was shown that the image stabilisation keeps the position error below 0.5 mm. Fast automatic working distance adjustment is crucial to minimise the duration of the diagnostic procedure. The image stabilisation compensates relative axial movements during handheld scanning.

Assortative mating and directional or stabilizing selection for a non-linear function of traits in Tribolium.

PubMed

Campo, J L; Gil, M G

1993-01-12

Assortative or random mating following selection in either direction on a non-linear index (experiment 1) or stabilizing selection for pupal length (experiment 2) were carried out for five generations in two lines of Tribolium castaneum (A and R, respectively), with three replicates each. The selected proportion was 25% in all lines. In experiment 1, the selection criterion was designed to increase the aggregate value of adult weight and the first- and second-order powers of pupal length. The A and R lines gave significant responses for the aggregate value (184 ± 6 and 161 ± 14, respectively), pupal length (0.74 ± 0.02 and 0.64 ± 0.05, respectively), and adult weight (0.79 ± 0.03 and 0.78 ± 0.12, respectively). Although the A line was not significantly better than the R line, there was a consistent advantage for assortative mating over random mating, the mean response for aggregate value and pupal length being approximately 1.15 times greater for the A line. In experiment 2 the selection criterion was the square of the deviation from the mean pupal length (stabilizing selection); both lines did not show any change for pupal length. The phenotypic variance showed a significant decrease in the A and R lines, due to a decrease in between-family variance. The assortatively and randomly mated lines were similar for these changes in phenotypic variation. RESUMEN: Aparemiento clasificado y selección direccional o estabilizante para una función no lineal en Tribolium. Dos líneas de Tribolium castaneum fueron seleccionadas direccionalmente para un índice no lineal (experimento 1) o estabilizantemente para longitud de pupa (experimento 2), apareando los animales seleccionados clasificadamente (A) o aleatoriamente (R). Había tres repeticiones por experimento y línea, siendo la proporción de selección el 25%. En el experimento 1, el objetivo de selección incluía el peso adulto así como la longitud de pupa y su cuadrado. Ambas líneas dieron respuesta significativa para el valor agregado y sus dos caracteres componentes. Había una ventaja consistente aunque no significativa para el apareamiento clasificado, siendo la respuesta media para valor agregado y longitud de pupa 1.15 veces mayor en la línea A. En el experimento 2, el criterio de selección era el cuadrado de la desviación con respecto a la media de longitud de pupa (selección estabilizante); ambas líneas no mostraron ningún cambio significativo en longitud de pupa. La varianza fenotípica tuvo una disminución significativa debida a una reducción de la varianza genética, siendo estos cambios similares en ambas líneas. ZUSAMMENFASSUNG: Assortative Paarung, gerichtete oder stabilisierende Selektion für nicht-lineare Funktion von Merkmalen in Triboleum Assortative oder Zufallspaarung nach gerichteter Selektion in beiden Richtungen für nicht-lineare Merkmale (Versuch 1) oder stabilisierende für Puppenlänge (Versuch 2) wurden über 5 Generationen bei Triboleum castaneum (A bzw. R), mit je 3 Wiederholungen und 25% Remonte, durchgeführt. In Versuch 1 sollten adultes Gewicht und 1. und 2. Potenz der Puppenlänge gesteigert werden. A und R Linien ergaben signifikante Selektionserfolge für Gesamtwert (184 ± 6 bezw. 161 ± 14), Puppenlänge (0,74 ± 02, 0.64 ± 05) und adultes Gewicht (0.74 ± 03 und 0.78 ± 0.12). Obwohl Linie A nicht statistisch signifikant überlegen war, zeigte sich durchgehend überlegenheit gegenüber R Linien, im Durchschnitt 1,15 mal. In Versuch 2 zeigte keine der beiden Linien Veränderungen der Puppenlänge, aber die Varianz nahm signifikant ab wegen Verminderung der Varianz zwischen Familien, deren Abnahme in der zufalls- und in der assortativ gepaarten Linie gleich groß war. RÉSUMÉ: Accouplement classé et sélection directionelle o stabilisant pour une fonction no lineal chez Tribolium Deux lingnées de Tribolium castaneum on été soumis a sélection directionelle par un index no lineal (Expérience 1) o stabilisant pour la longeur de la pupae (Expérience 2), avec accouplement des animaux sélectiones de façon classé (A) ou aléatoire (R). Le travail compris 3 répétitions pour chacune des expériences et lignée, avec une presion de sélection du 25%. Dans l'expérience 1 l'objetive de sélection était composé pour le poids adult, la longeur de la pupae et sa carrée. On a obtenû une réponse significative chez les deux lignées por l'agregé et aussi pour les deux caractéres. On a obtenû une superiorité no significative mais consistant de l'accouplement classé, étant la réponse moyenne pour l'agregé et la longeur de la pupae 1.15 fois plus grand chez la lignée A. Pour l'experience 2 le critére de selection etait le carrée de la deviation a la moyenne de la longeur de la pupae (sélection stabilisant); aucune des lignees montrait changes significatives pour la longeur de la pupae. La variation phénotypique montre une réduction significative ` cause de la réduction du variation génétique, avec changes similaires chez les deux lignees. 1993 Blackwell Verlag GmbH.

Effets de la formation sur la violence conjugale

PubMed Central

Zaher, Eman; Keogh, Kelly; Ratnapalan, Savithiri

2014-01-01

Résumé Objectif Décrire et évaluer l’efficacité de la formation concernant la violence conjugale pour améliorer les connaissances et permettre la reconnaissance et la prise en charge par les médecins des femmes victimes de violence. Sources des données On a fait une recension dans la base de données des révisions systématiques de Cochrane, MEDLINE, PubMed, PsycINFO, ERIC et EMBASE pour trouver des articles publiés entre le 1e janvier 2000 et le 1e novembre 2012. Des recherches manuelles ont complété cette recension pour cerner des articles pertinents à l’aide d’une stratégie de recherche combinant des textes, mots et expressions MeSH. Sélection des études On a choisi des études randomisées contrôlées qui portaient sur des interventions éducatives à l’intention des médecins et fournissaient des données sur les effets des interventions. Synthèse On a inclus 9 études randomisées contrôlées qui décrivaient différentes approches pédagogiques et diverses mesures des résultats. Trois études examinaient les effets d’interventions éducatives pour des médecins en formation postdoctorale et ont constaté une augmentation des connaissances, mais il n’y a eu aucun changement dans le comportement en ce qui a trait à l’identification des victimes de violence conjugale. Six études portaient sur des interventions éducatives pour des médecins en pratique active. Trois d’entre elles utilisaient une approche à multiples facettes pour les médecins, qui combinait une formation ainsi que des interventions de soutien de la part du système pour changer les comportements des médecins, comme une sensibilisation générale accrue à la violence conjugale au moyen de brochures et d’affiches, des aide-mémoire pour rappeler aux médecins comment identifier les victimes, des moyens pour faciliter l’accès des médecins à des services de soutien pour les victimes, la réalisation d’audits et la fourniture de rétroaction. Les interventions éducatives à multiples facettes prenaient la forme d’ateliers interactifs, d’apprentissage sur le web et de formation expérientielle. Une autre étude utilisait des discussions de groupes témoins et de la formation et a permis de constater une amélioration dans le signalement de la violence conjugale par les médecins. Les 2 autres études ont relevé une meilleure perception par les médecins en pratique de leur confiance en eux à l’aide d’apprentissage par problèmes en ligne. Conclusion Il a été difficile de déterminer quelle stratégie pédagogique était la plus efficace étant donné que les interventions éducatives et les mesures des résultats variaient entre les études choisies. De brèves interventions pour les médecins en formation postdoctorale amélioraient les connaissances mais ne semblaient pas influencer les comportements. La formation en ligne sous forme d’apprentissage par problèmes améliorait les perceptions des médecins en pratique, leurs connaissances et leurs habiletés quant à la prise en charge de la violence conjugale. La formation des médecins combinée à des interventions de soutien de la part du système semblait bénéfique aux victimes de violence conjugale et augmentait le nombre de demandes de consultations auprès des ressources de soutien à leur intention.

La prévention de l’étouffement et de la suffocation chez les enfants

PubMed Central

Cyr, Claude

2012-01-01

RÉSUMÉ L’étouffement, la suffocation et la strangulation sont responsables de graves blessures non intentionnelles chez les enfants et constituent des causes importantes de décès non intentionnels chez les nourrissons et les tout-petits. Presque la totalité des décès et des blessures attribuables à un étouffement, une suffocation ou une strangulation sont évitables. Le présent document de principes traite des définitions, de l’épidémiologie et des stratégies de prévention efficaces de ces blessures. Des recommandations qui combinent des démarches pour améliorer la sécurité, incluant des recherches, de la surveillance, des lois et des normes, la conception des produits et l’éducation, sont présentées. Les dispensateurs de soins pédiatriques devraient encourager les parents et autres personnes qui s’occupent d’enfants à apprendre la réanimation cardiorespiratoire (RCR) et les premiers soins en cas d’étouffement, et leur offrir des conseils préventifs adaptés à l’âge de leur enfant lors des bilans de santé réguliers afin de prévenir ces blessures.

Organomineral interactions as an important mechanism for stabilisation of bacterial residues in soil

NASA Astrophysics Data System (ADS)

Miltner, Anja; Achtenhagen, Jan; Kästner, Matthias

2017-04-01

Although plant material is the original input of organic matter to soils, microbial residues have been identified to contribute to a large extent to soil organic matter. However, until now it is unclear how microbial residues are stabilised in soil and protected from degradation. We hypothesised that organomineral interactions, in particular encrustation by oxides, may play an important role, which might vary depending on environmental conditions, e.g. redox potential. Therefore we produced 14C-labelled Escherichia coli cells and cell envelope fragments and coprecipitated these materials with Fe oxide or Al oxide. Mineral-free (control) and mineral-encrusted bacterial residues were incubated for 345 days at 20˚ C under either oxic or oxygen-limited conditions, and mineralisation was quantified by scintillation counting of the CO2 produced during incubation. Oxygen limitation was achieved by first exchanging the atmosphere in the incubation vessels with dinitrogen gas. After 100 days of incubation, the anoxic treatments were waterlogged to further decrease the redox potential, and after 290 days, glucose and nutrients were supplied to all treatments in order to foster microbial activity and consumption of electron acceptors. The mineralisation curves were fitted by double-exponential (0-100 days), first-order kinetic (100-290 days) and linear (290-345 days) models. The model parameters were tested for significant differences between the treatments by three-way ANOVA with post-hoc Bonferroni t-test. We found that encrustation by the oxides significantly reduced mineralisation of the bacterial residues. This effect was inversed by reductive dissolution of Fe oxides after substrate and nutrient addition to the oxygen-limited treatments, suggesting a significant role of the encrustation in stabilisation of the bacterial residues. We also observed that bacterial cell envelope fragments were generally slightly more resistant to mineralisation than whole cells. The results indicate that bacterial residues, in particular cell envelope fragments, may be stabilised in soil by organomineral interactions as long as the minerals are stable in soil.

Effect of duckweed cover on greenhouse gas emissions and odour release from waste stabilisation ponds.

PubMed

van der Steen, N P; Nakiboneka, P; Mangalika, L; Ferrer, A V M; Gijzen, H J

2003-01-01

Treatment of wastewater in stabilisation pond systems prevents the negative environmental impact of uncontrolled disposal of sewage. However, even a natural treatment system may generate secondary negative environmental impacts in terms of energy consumption, emission of greenhouse gases and emission of odorous compounds. Whereas natural systems have an advantage over electro-mechanical systems in that they use less hardware and less energy, it is not yet known whether secondary environmental effects in the form of greenhouse gas emissions are lower for these systems. This research intends to be a first step in the direction of answering this question by assessing gas emissions from two types of natural systems, namely algae-based and duckweed-based stabilisation ponds. The H2S volatilisation from laboratory scale pond-reactors has been determined by drawing the air above the water surface continuously through a solution of 1 M NaOH for absorption of sulphide. The amount of H2S that volatilised from the algae pond-reactor, and was trapped in the NaOH trap, was found to be 2.5-86 mg/m2/day. The H2S volatilisation from the duckweed pond-reactor was found to be negligible, even though the sulphide concentration was 9.7 mg/l S(2-). The duckweed cover was a physical barrier for volatilisation, since bubbles were trapped in the cover. In addition the duckweed layer was found to be afavourable environment for both aerobic sulphide oxidisers (Beggiatoa gigantae) as well as for photosynthetic purple sulphur bacteria belonging to the genus Chromatium. These may also have contributed to the prevention of H2S volatilisation. Results on methane emissions were not conclusive so far, but the same mechanisms that prevent H2S volatilisation may also prevent methane volatilisation. Therefore it was concluded that duckweed covers on stabilisation ponds may reduce the emission of both odorous and greenhouse gases.

Phase stabilisation of hexagonal barium titanate doped with transition metals: A computational study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dawson, J.A., E-mail: mtp09jd@sheffield.ac.uk; Freeman, C.L.; Harding, J.H.

Interatomic potentials recently developed for the modelling of BaTiO{sub 3} have been used to explore the stabilisation of the hexagonal polymorph of BaTiO{sub 3} by doping with transition metals (namely Mn, Co, Fe and Ni) at the Ti-site. Classical simulations have been completed on both the cubic and hexagonal polymorphs to investigate the energetic consequences of transition metal doping on each polymorph. Ti-site charge compensation mechanisms have been used for the multi-valent transition metal ions and cluster binding energies have been considered. Simulations show a significant energetic gain when doping occurs at Ti sites in the face sharing dimers (Ti{submore » 2} sites) of the hexagonal polymorph compared with the doping of the cubic polymorph. This energetic difference between the two polymorphs is true for all transition metals tested and all charge states and in the case of tri- and tetra-valent dopants negative solution energies are found for the hexagonal polymorph suggesting actual polymorph stabilisation occurs with the incorporation of these ions as observed experimentally. Oxidation during incorporation of Ni{sup 2+} and Fe{sup 3+} ions has also been considered. - Graphical abstract: The representation of the strongest binding energy clusters for tri-valent dopants—(a) Ti{sub 2}/O{sub 1} cluster and (b) Ti{sub 2}/O{sub 2} cluster. Highlights: ► Classical simulations show a significant energetic gain when doping occurs at Ti sites in the face sharing dimers (Ti2 sites) of the hexagonal polymorph compared with the doping of the cubic polymorph. ► This energetic difference between the two polymorphs is true for all transition metals tested and all charge states. ► In the case of tri- and tetra- valent dopants negative solution energies are found for the hexagonal polymorph suggesting actual polymorph stabilisation occurs with the incorporation of these ions.« less

Robust scalable stabilisability conditions for large-scale heterogeneous multi-agent systems with uncertain nonlinear interactions: towards a distributed computing architecture

NASA Astrophysics Data System (ADS)

Manfredi, Sabato

2016-06-01

Large-scale dynamic systems are becoming highly pervasive in their occurrence with applications ranging from system biology, environment monitoring, sensor networks, and power systems. They are characterised by high dimensionality, complexity, and uncertainty in the node dynamic/interactions that require more and more computational demanding methods for their analysis and control design, as well as the network size and node system/interaction complexity increase. Therefore, it is a challenging problem to find scalable computational method for distributed control design of large-scale networks. In this paper, we investigate the robust distributed stabilisation problem of large-scale nonlinear multi-agent systems (briefly MASs) composed of non-identical (heterogeneous) linear dynamical systems coupled by uncertain nonlinear time-varying interconnections. By employing Lyapunov stability theory and linear matrix inequality (LMI) technique, new conditions are given for the distributed control design of large-scale MASs that can be easily solved by the toolbox of MATLAB. The stabilisability of each node dynamic is a sufficient assumption to design a global stabilising distributed control. The proposed approach improves some of the existing LMI-based results on MAS by both overcoming their computational limits and extending the applicative scenario to large-scale nonlinear heterogeneous MASs. Additionally, the proposed LMI conditions are further reduced in terms of computational requirement in the case of weakly heterogeneous MASs, which is a common scenario in real application where the network nodes and links are affected by parameter uncertainties. One of the main advantages of the proposed approach is to allow to move from a centralised towards a distributed computing architecture so that the expensive computation workload spent to solve LMIs may be shared among processors located at the networked nodes, thus increasing the scalability of the approach than the network size. Finally, a numerical example shows the applicability of the proposed method and its advantage in terms of computational complexity when compared with the existing approaches.

Satisfactory short-term outcomes of the STABILISE technique for type B aortic dissection.

PubMed

Melissano, Germano; Bertoglio, Luca; Rinaldi, Enrico; Mascia, Daniele; Kahlberg, Andrea; Loschi, Diletta; De Luca, Monica; Monaco, Fabrizio; Chiesa, Roberto

2018-03-29

The aim of this study was to evaluate the perioperative and short-term results in a cohort of patients treated during the last year at our institution with the stent-assisted balloon-induced intimal disruption and relamination in aortic dissection repair (STABILISE) technique for acute complicated aortic dissection. Between June 2016 and June 2017, 10 patients (all male; mean age, 62.6 ± 7.4 years) received treatment for acute complicated aortic dissection with the STABILISE technique. After a standard provisional extension to induce complete attachment procedure using the commercially available endovascular dissection system (Cook Medical, Bloomington, Ind), the distal stent graft area and the bare stent area were ballooned to completely exclude the thoracic false lumen (FL) and to obtain a single-channeled abdominal aorta. Computed tomography was routinely performed within the first postoperative week before discharge and then at 3 months, at 6 months, and yearly thereafter. The technical and clinical success rates were analyzed. The 30-day technical and clinical success rates were 100%, with complete thrombosis of the thoracic FL and no type I endoleak. Malperfusion was resolved in all cases. No aortic ruptures were recorded, and no open conversion was required. One case of delayed spinal cord ischemia fully resolved within the discharge period. Predischarge computed tomography showed complete thrombosis of the thoracic FL in all cases. In two cases, some degree of patency of the abdominal FL was observed. At short-term follow-up, the overall aortic diameters remained stable with no further dilation. The STABILISE technique was safe and feasible in this cohort of patients, with complete thrombosis of the thoracic FL and creation of a single-channeled aorta in most cases. Further studies are needed to ascertain the long-term behavior of the treated aorta. Copyright © 2018 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

Combined intra- and extra-articular grafting for revision ACL reconstruction: A multicentre study by the French Arthroscopy Society (SFA).

PubMed

Louis, M-L; D'ingrado, P; Ehkirch, F P; Bertiaux, S; Colombet, P; Sonnery-Cottet, B; Schlatterer, B; Pailhé, R; Panisset, J C; Steltzlen, C; Lustig, S; Lutz, C; Dalmay, F; Imbert, P; Saragaglia, D

2017-12-01

A careful analysis of the reasons for ACL reconstruction failure is essential to selection of the optimal surgical revision technique designed to ensure good rotational stability and to minimise the risk of re-rupture. To evaluate anterolateral ligament (ALL) stabilisation during revision ACL reconstruction. ALL stabilisation during revision ACL reconstruction provides good rotational stability without increasing the risk of complications. This multicentre study included 349 patients, 151 retrospectively and 198 prospectively. There were 283 males and 66 females. Inclusion criteria were an indication for revision ACL reconstruction surgery with combined intra-articular reconstruction and ALL stabilisation after failed autograft ACL reconstruction, and intact PCL. Exclusion criteria were primary ACL reconstruction and concomitant peripheral medial and/or lateral lesions. Each patient underwent a clinical and radiographic evaluation before and after revision surgery. Before revision surgery, the mean IKDC score was 56.5±15.5 and 96% of patients were IKDC C or D. Rates were 5.0% for early and 10.5% for late postoperative complications. Lachmann's test had a hard stop at last follow-up in 97% of patients. The pivot-shift test was positive in 1% of patients. The mean subjective IKDC score was 84.5±13.0 and 86.5% of patients were IKDC A or B. The proportions of patients with radiographic knee osteoarthritis at last follow-up was unchanged for the lateral tibio-femoral and patello-femoral compartments but increased by 9.7% to 21.2% for the medial tibio-femoral compartment. The re-rupture rate was 1.2% and the further surgical revision rate was 5.4%. Anterior laxity at last follow-up was consistent with previous studies of revision ACL reconstruction. However, rotational stability and the re-rupture risk were improved. ALL stabilisation is among the techniques that deserve consideration as part of the therapeutic options for revision ACL reconstruction. IV, retrospective and prospective cohort study. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Measuring Effects and Success in Influence Operations: Challenges, Limitations and Opportunitites

DTIC Science & Technology

2011-04-01

domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de...documents issus des domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des...la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de l’intelligence

[Growth and deformity after in situ fixation of slipped capital femoral epiphysis].

PubMed

Druschel, C; Placzek, R; Funk, J F

2013-08-01

For mild to moderate slipped capital femoral epiphysis (SCFE) in situ fixation is the current treatment standard. However, concerning the implant selection (screw versus k-wires) as well as the prophylactic stabilisation of the non-affected hip, controversies still exist. The aim of this study was to analyse femoral residual growth and femoral deformities after in situ fixation of SCFE either with k-wires or screws. We conducted a retrospective analysis of the radiographs of adolescents treated for SCFE in our department between 01/2003 and 02/2011. To evaluate femoral growth the articulo-trochanteric distance, centro-trochanteric distance, caput-collum-diaphyseal angle, pin-joint ratio and pin-physis ratio were determined. The femoral deformity was assessed by measuring the sphericity of the femoral head. Degenerative changes were evaluated in the final radiographs. Statistical analysis was performed concerning differences between therapeutically and prophylactically treated hips as well as stabilisations with k-wires and screws. A total of 22 patients (female : male = 14 : 8, mean age girls: 11 ± 1 years, boys: 13 ± 2 years) with 26 slipped capital femoral epiphyses was analysed. K-wires were used for fixation in 4 hips each therapeutically and prophylactically, 22 hips with SCFE and 14 non-affected hips were stabilised with screws. Treatment with screws did not lead to significantly earlier physeal closure than k-wire pinning. Regarding the femoral growth parameters a significant decrease in the articulo-trochanteric distance and CCD angle was detectable in all groups. The pin-joint ratio revealed an adequate residual growth in 58 % of the therapeutically and in 72 % of the prophylactically treated hips without significant difference between k-wires and screws. The pin-physis ratio demonstrated similar values. Regarding the femoral deformity the SCFE hips resulted in a significantly reduced sphericity, which remained unchanged during follow-up. The prophylactic stabilisation did not result in any deterioration of sphericity. The results of this study imply that further growth of the proximal femur after insertion of a sliding screw for in situ stabilisation of mild to moderate slipped capital femoral epiphysis does occur. Furthermore, an increase of deformity during follow-up through screw fixation as compared to pinning was not noticed. Hence, the assumption that screw fixation leads to permanent physeal impairment cannot be confirmed. The consideration of these results may be helpful for implant selection as well as indicating prophylactic surgery for non-affected hips. Georg Thieme Verlag KG Stuttgart · New York.

[Intra-articular reinforcement of a partially torn anterior cruciate ligament (ACL) using newly developed UHMWPE biomaterial in combination with Hexalon ACL/PCL screws: ex-vivo mechanical testing of an animal knee model].

PubMed

Fedorová, P; Srnec, R; Pěnčík, J; Dvořák, M; Krbec, M; Nečas, A

2015-01-01

PURPOSE OF THE STUDY Recent trends in the experimental surgical management of a partial anterior cruciate ligament (ACL) rupture in animals show repair of an ACL lesion using novel biomaterials both for biomechanical reinforcement of a partially unstable knee and as suitable scaffolds for bone marrow stem cell therapy in a partial ACL tear. The study deals with mechanical testing of the newly developed ultra-high-molecular-weight polyethylene (UHMWPE) biomaterial anchored to bone with Hexalon biodegradable ACL/PCL screws, as a new possibility of intra-articular reinforcement of a partial ACL tear. MATERIAL AND METHODS Two groups of ex vivo pig knee models were prepared and tested as follows: the model of an ACL tear stabilised with UHMWPE biomaterial using a Hexalon ACL/PCL screw (group 1; n = 10) and the model of an ACL tear stabilised with the traditional, and in veterinary medicine used, extracapsular technique involving a monofilament nylon fibre, a clamp and a Securos bone anchor (group 2; n = 11). The models were loaded at a standing angle of 100° and the maximum load (N) and shift (mm) values were recorded. RESULTS In group 1 the average maximal peak force was 167.6 ± 21.7 N and the shift was on average 19.0 ± 4.0 mm. In all 10 specimens, the maximum load made the UHMWPE implant break close to its fixation to the femur but the construct/fixation never failed at the site where the material was anchored to the bone. In group 2, the average maximal peak force was 207.3 ± 49.2 N and the shift was on average 24.1 ± 9.5 mm. The Securos stabilisation failed by pullout of the anchor from the femoral bone in nine out of 11 cases; the monofilament fibre ruptured in two cases. CONCLUSIONS It can be concluded that a UHMWPE substitute used in ex-vivo pig knee models has mechanical properties comparable with clinically used extracapsular Securos stabilisation and, because of its potential to carry stem cells and bioactive substances, it can meet the requirements for an implant appropriate to the unique technique of protecting a partial ACL tear. In addition, it has no critical point of ACL substitute failure at the site of its anchoring to the bone (compared to the previously used PET/PCL substitute). Key words: knee stabilisation, stifle surgery, ultra-high-molecular-weight polyethylene, UHMWPE, nylon monofilament thread, biodegradable screw, bone anchor.

Implementation Cryptography Data Encryption Standard (DES) and Triple Data Encryption Standard (3DES) Method in Communication System Based Near Field Communication (NFC)

NASA Astrophysics Data System (ADS)

Ratnadewi; Pramono Adhie, Roy; Hutama, Yonatan; Saleh Ahmar, A.; Setiawan, M. I.

2018-01-01

Cryptography is a method used to create secure communication by manipulating sent messages during the communication occurred so only intended party that can know the content of that messages. Some of the most commonly used cryptography methods to protect sent messages, especially in the form of text, are DES and 3DES cryptography method. This research will explain the DES and 3DES cryptography method and its use for stored data security in smart cards that working in the NFC-based communication system. Several things that will be explained in this research is the ways of working of DES and 3DES cryptography method in doing the protection process of a data and software engineering through the creation of application using C++ programming language to realize and test the performance of DES and 3DES cryptography method in encrypted data writing process to smart cards and decrypted data reading process from smart cards. The execution time of the entering and the reading process data using a smart card DES cryptography method is faster than using 3DES cryptography.

Préoccupations de carrière chez les médecins de travail des groupements de Médecine de travail en Tunisie

PubMed Central

Merchaoui, Irtyah; Chouchène, Asma; Bouanène, Ines; Chaari, Néila; Zrafi, Wassim; Henchi, Adnène; Akrout, Mohamed; Amri, Charfeddine

2017-01-01

Introduction L'insatisfaction de carrière des médecins de travail (MT) peut influencer leur performance et la qualité des prestations fournies. L'objectif de notre étude est d'évaluer la satisfaction au travail des MT du terrain de l'ensemble des Groupements de médecine de travail (GMT) de la Tunisie et préciser les facteurs déterminants. Méthodes Il s'agit d'une étude nationale transversale portant sur les MT de 22 GMT, basée sur le questionnaire, validé SAPHORA JOB. Résultats 58% des MT des GMT étaient insatisfaits de leur carrière. La satisfaction de carrière était statistiquement influencée par le nombre d'entreprises en charge (p=0,016), l'organisation du travail (p=0,010),le ressenti du métier (p=0,011),le salaire (p‹10-3) et l'information sur la réglementation en vigueur (p=0,047). Conclusion L'homogénéisation des grilles salariales et des échelons de carrière des MT des GMT basée sur une révision des textes législatifs est indiquée. L'amélioration de l'organisation et des conditions de travail peut permettre un épanouissement au travail et une amélioration des prestations. PMID:28819472

Deformation and stabilisation mechanisms of slow rock slides in crystalline bedrock

NASA Astrophysics Data System (ADS)

Zangerl, C.; Prager, C.

2009-04-01

Deep-seated rock slides are slope instabilities which are characterised by deformation along one or several shear zones where most of the measured total slope displacement localizes. Generally, a high danger potential is given when rock slides fail in a rapid manner characterised by very high sliding velocities and/or when they develop into long run-out rock avalanches. However several field surveys and deformation monitoring data show that numerous deep-seated rock slides do not fail in a high velocity regime. In fact, many slides creep downwards at rates of some centimetres per year or even less and do not show any evidence for non-reversible acceleration in the past or in the future. Furthermore some of these slope instabilities are actually inactive (dormant) or have even reached a stabilised final state. Deformation monitoring on active rock slides show that acceleration phases characterised by velocities up to meters per day can occur. The trigger for these phases can be manifold and include heavy rainfall, snow melt, water level fluctuations of reservoirs at the slope foot, changes in the slope's equilibrium state due to antecedent slow creeping processes, changes in the material behaviour within the sliding zone, erosion along the foot of the slope, etc. Whereas the role of these triggers in promoting phases of acceleration are generally understood, the same can not be said regarding the kinematics and dynamic processes/mechanisms by which rock slide masses re-stabilise once the trigger impetus has been removed. In the context of this study the term "stabilisation" is used for rock slides which decelerate from high velocities to slow base activities or even stop moving after a certain amount of displacement. Given that reliable rock slide forecasts require the fundamental understanding of possible slope stabilisation mechanisms this study focuses on field-based and numerically obtained key-properties which influence the long-term slope deformation behaviour. On a regional scale several valleys located in amphibolites, ortho- and paragneisses of the Ötztal-Stubai crystalline basement (i.e. Kaunertal, Pitztal, Ötztal, Lüsenstal, all located in North Tyrol, Austria) were investigated. Therefore geological and morphological basis data were compiled and re-evaluated, remote sensing methods (i.e. airborne laser scanning terrain models and orthofotos) applied and field mapping campaigns performed. On a local scale several rock slides were investigated and analysed in high detail with regard to their lithological and structural inventory, geometry of sliding masses and -zones, failure mechanisms, kinematics and temporal deformation characteristics. Field data clearly show that competent rock masses, e.g. orthogneisses and amphibolites, are affected by rapid failure events and therefore are characterised by "brittle" rock mass behaviour. In contrast, the majority of the slowly moving and "self-stabilising" rock slides are located totally or partly in mica-rich incompetent crystalline rock masses, e.g. paragneisses and micaschists, and are characterised by moderately dipping sliding zones. Apart from a causal lithological influence, numerous field observations demonstrate a major influence of pre-existing geological structures on the formation and deformation behaviour of these rock slides. The nature of rock slides implies that the temporal deformation behaviour is primarily dominated by two key-features of the sliding zone i.e. the mechanical properties (shear strain strengthening or weakening) and the effective in-situ stresses. The in-situ stresses along a sliding zone are influenced by the geometry of both the sliding mass and sliding zone, the internal deformation of the sliding mass and the pore pressures. All these properties can vary during progressive shear displacements. Especially large shear displacements in the range of tens to hundreds of metres along a distinct sliding zone can cause significant in-situ stress changes which in turn may influence the slope deformation behaviour and stabilisation mechanisms. In order to study these processes for selected case studies in paragneissic rock masses the impact of the sliding mass geometry and sliding zone shape on the in-situ stresses has been investigated by applying the discrete element method. This numerical approach enables the simulation of large shear displacements and complex block assembly interactions. Results show that slope stabilisation can be achieved when the dip angle of the sliding zone flattens downslope. In this case and after a certain amount of displacement the lower part of the rock slide mass reaches stable slope conditions (shear strength of the sliding zone material exceeds the shear stress acting on the sliding zone) and acts as a resisting mass for the still unstable upper part of the slope. Furthermore numerical models show that secondary slides at the lower part of the slope have a similar effect. In both case cases the observed slope stabilisation can be clearly attributed to the formation of natural buttressing masses at the toe.

An Overview of the Canadian Forces’ Second Generation Capability-Based Planning Analytical Process

DTIC Science & Technology

2010-09-01

gestion et intgration des capacités Feuille de route des capacits stratégiques Produits clès Plan d’investissement Plan de capacités de défense...méthodes de recherche opérationnelle objectives et subjectives permet- tant la mise en œuvre du volet « planification, gestion et intégration des ...pacités, la gestion des capacités et l’intégration des capacités. Le processus comprend des intrants, des méthodes

Paternité des articles et intérêts concurrents : une analyse des recommandations aux auteurs des journaux traitant de pratique pharmaceutique

PubMed Central

Courbon, Ève; Tanguay, Cynthia; Lebel, Denis; Bussières, Jean-François

2014-01-01

RÉSUMÉ Contexte : La présence d’auteurs honorifiques et fantômes ainsi que les intérêts concurrents représentent des difficultés bien documentées, liées à la publication d’articles scientifiques. Il existe des lignes directrices encadrant la rédaction et la publication de manuscrits scientifiques, notamment celles de l’International Committee of Medical Journal Editors (ICMJE). Objectifs : L’objectif principal de cette étude descriptive et transversale visait à recenser les instructions portant sur la paternité des articles et les intérêts concurrents provenant des recommandations aux auteurs des journaux traitant de pratique pharmaceutique. L’objectif secondaire visait à déterminer des mesures correctrices pour une paternité des articles plus transparente. Méthode : La recherche a débuté par l’identification des journaux traitant de pratique pharmaceutique. La consultation des instructions aux auteurs des journaux a permis ensuite de recenser les recommandations destinées à éviter les problèmes de paternité des articles et d’intérêts concurrents. Finalement, les membres de l’équipe de recherche se sont consultés afin de définir des mesures correctrices possibles à l’intention des chercheurs. Résultats : Des 232 journaux traitant de pharmacie, 33 ont été définis comme traitant de pratique pharmaceutique. Un total de 24 (73 %) journaux mentionnaient suivre la politique de l’ICMJE, 14 (42 %) demandaient aux auteurs de remplir un formulaire de déclaration d’intérêts concurrents au moment de la soumission de l’article, 17 (52 %) présentaient une définition de la qualité d’auteur et 5 (15 %) demandaient de détailler les contributions de chaque auteur. Une grille de 40 critères a été élaborée pour définir l’attribution du statut d’auteur. Conclusion : Moins de la moitié des journaux demandait aux auteurs de transmettre un formulaire de déclaration des intérêts concurrents au moment de la soumission d’un article et seulement la moitié des journaux avait donné une définition de la qualité d’auteur. La publication scientifique de travaux sur les pratiques pharmaceutiques n’est pas à l’abri des manques de transparence liés à la publication. L’utilisation d’une grille décrivant la contribution de chaque auteur et la publication en ligne des travaux peuvent contribuer à limiter ces risques. PMID:24970938

Influence of oxygen, albumin and pH on copper dissolution in a simulated uterine fluid.

PubMed

Bastidas, D M; Cano, E; Mora, E M

2005-06-01

The aim of this paper is to study the influence of albumin content, from 5 to 45 g/L, on copper dissolution and compounds composition in a simulated uterine solution. Experiments were performed in atmospheric pressure conditions and with an additional oxygen pressure of 0.2 atmospheres, at 6.3 and 8.0 pH values, and at a temperature of 37 +/- 0.1 degrees C for 1, 3, 7, and 30 days experimentation time. The copper dissolution rate has been determined using absorbance measurements, finding the highest value for pH 8.0, 35 g/L albumin, and with an additional oxygen pressure of 0.2 atmospheres: 674 microg/day for 1 day, and 301 microg/day for 30 days. X-ray photoelectron spectroscopy (XPS) results show copper(II) as the main copper oxidation state at pH 8.0; and copper(I) and metallic copper at pH 6.3. The presence of albumin up to 35 g/L, accelerates copper dissolution. For high albumin content a stabilisation on the copper dissolution takes place. Corrosion product layer morphology is poorly protective, showing paths through which copper ions can release.

Quantitation of MRI sensitivity to quasi-monodisperse microbubble contrast agents for spatially resolved manometry.

PubMed

Bencsik, Martin; Al-Rwaili, Amgad; Morris, Robert; Fairhurst, David J; Mundell, Victoria; Cave, Gareth; McKendry, Jonathan; Evans, Stephen

2013-11-01

The direct in-vivo measurement of fluid pressure cannot be achieved with MRI unless it is done with the contribution of a contrast agent. No such contrast agents are currently available commercially, whilst those demonstrated previously only produced qualitative results due to their broad size distribution. Our aim is to quantitate then model the MR sensitivity to the presence of quasi-monodisperse microbubble populations. Lipid stabilised microbubble populations with mean radius 1.2 ± 0.8 μm have been produced by mechanical agitation. Contrast agents with increasing volume fraction of bubbles up to 4% were formed and the contribution the bubbles bring to the relaxation rate was quantitated. A periodic pressure change was also continuously applied to the same contrast agent, until MR signal changes were only due to bubble radius change and not due to a change in bubble density. The MR data compared favourably with the prediction of an improved numerical simulation. An excellent MR sensitivity of 23 % bar(-1) has been demonstrated. This work opens up the possibility of generating microbubble preparations tailored to specific applications with optimised MR sensitivity, in particular MRI based in-vivo manometry. Copyright © 2012 Wiley Periodicals, Inc.

Supramolecular organization and chiral resolution of p-terphenyl-m-dicarbonitrile on the Ag(111) surface.

PubMed

Marschall, Matthias; Reichert, Joachim; Seufert, Knud; Auwärter, Willi; Klappenberger, Florian; Weber-Bargioni, Alexander; Klyatskaya, Svetlana; Zoppellaro, Giorgio; Nefedov, Alexei; Strunskus, Thomas; Wöll, Christof; Ruben, Mario; Barth, Johannes V

2010-05-17

The supramolecular organization and layer formation of the non-linear, prochiral molecule [1, 1';4',1'']-terphenyl-3,3"-dicarbonitrile adsorbed on the Ag(111) surface is investigated by scanning tunneling microscopy (STM) and near-edge X-ray absorption fine-structure spectroscopy (NEXAFS). Upon two-dimensional confinement the molecules are deconvoluted in three stereoisomers, that is, two mirror-symmetric trans- and one cis-species. STM measurements reveal large and regular islands following room temperature deposition, whereby NEXAFS confirms a flat adsorption geometry with the electronic pi-system parallel to the surface plane. The ordering within the expressed supramolecular arrays reflects a substrate templating effect, steric constraints and the operation of weak lateral interactions mainly originating from the carbonitrile endgroups. High-resolution data at room temperature reveal enantiormorphic characteristics of the molecular packing schemes in different domains of the arrays, indicative of chiral resolution during the 2D molecular self-assembly process. At submonolayer coverage supramolecular islands coexist with a disordered fluid phase of highly mobile molecules. Following thermal quenching (down to 6 K) we find extended supramolecular ribbons stabilised again by attractive and directional noncovalent interactions, the formation of which reflects a chiral resolution of trans-species.

Involvement of the Spinal Cord in Mitochondrial Disorders.

PubMed

Finsterer, Josef; Zarrouk-Mahjoub, Sinda

2018-01-01

This review aims at summarising and discussing the current status concerning the clinical presentation, pathogenesis, diagnosis, and treatment of spinal cord affection in mitochondrial disorders (MIDs). A literature search using the database Pubmed was carried out by application of appropriate search terms and their combinations. Involvement of the spinal cord in MIDs is more frequent than anticipated. It occurs in specific and non-specific MIDs. Among the specific MIDs it has been most frequently described in LBSL, LS, MERRF, KSS, IOSCA, MIRAS, and PCH and only rarely in MELAS, CPEO, and LHON. Clinically, spinal cord involvement manifests as monoparesis, paraparesis, quadruparesis, sensory disturbances, hypotonia, spasticity, urinary or defecation dysfunction, spinal column deformities, or as transverse syndrome. Diagnosing spinal cord involvement in MIDs requires a thoroughly taken history, clinical exam, and imaging studies. Additionally, transcranial magnetic stimulation, somato-sensory-evoked potentials, and cerebro-spinal fluid can be supportive. Treatment is generally not at variance compared to the underlying MID but occasionally surgical stabilisation of the spinal column may be necessary. It is concluded that spinal cord involvement in MIDs is more frequent than anticipated but may be missed if cerebral manifestations prevail. Spinal cord involvement in MIDs may strongly determine the mobility of these patients.

Mechanisms and Patterns of Intravascular Ultrasound In-Stent Restenosis Among Bare Metal Stents and First- and Second-Generation Drug-Eluting Stents.

PubMed

Goto, Kosaku; Zhao, Zhijing; Matsumura, Mitsuaki; Dohi, Tomotaka; Kobayashi, Nobuaki; Kirtane, Ajay J; Rabbani, LeRoy E; Collins, Michael B; Parikh, Manish A; Kodali, Susheel K; Leon, Martin B; Moses, Jeffrey W; Mintz, Gary S; Maehara, Akiko

2015-11-01

The most common causes of in-stent restenosis (ISR) are intimal hyperplasia and stent under expansion. The purpose of this study was to use intravascular ultrasound (IVUS) to compare the ISR mechanisms of bare metal stents (BMS), first-generation drug-eluting stents (DES), and second-generation DES. There were 298 ISR lesions including 52 BMS, 73 sirolimus-eluting stents, 52 paclitaxel-eluting stents, 16 zotarolimus-eluting stents, and 105 everolimus-eluting stent. Mean patient age was 66.6 ± 1.1 years, 74.2% were men, and 48.3% had diabetes mellitus. BMS restenosis presented later (70.0 ± 66.7 months) with more intimal hyperplasia compared with DES (BMS 58.6 ± 15.5%, first-generation DES 52.6 ± 20.9%, second-generation DES 48.2 ± 22.2%, p = 0.02). Although reference lumen areas were similar in BMS and first- and second-generation DES, restenotic DES were longer (BMS 21.8 ± 13.5 mm, first-generation DES 29.4 ± 16.1 mm, second-generation DES 32.1 ± 18.7 mm, p = 0.003), and stent areas were smaller (BMS 7.2 ± 2.4 mm(2), first-generation DES 6.1 ± 2.1 mm(2), second-generation DES 5.7 ± 2.0 mm(2), p <0.001). Stent fracture was seen only in DES (first-generation DES 7 [5.0%], second-generation DES 8 [7.4%], p = 0.13). In conclusion, restenotic first- and second-generation DES were characterized by less neointimal hyperplasia, smaller stent areas, longer stent lengths, and more stent fractures than restenotic BMS. Copyright © 2015 Elsevier Inc. All rights reserved.

Oil-in-water emulsions stabilised by cellulose ethers: stability, structure and in vitro digestion.

PubMed

Borreani, Jennifer; Espert, María; Salvador, Ana; Sanz, Teresa; Quiles, Amparo; Hernando, Isabel

2017-04-19

The effect of cellulose ethers in oil-in-water emulsions on stability during storage and on texture, microstructure and lipid digestibility during in vitro gastrointestinal digestion was investigated. All the cellulose ether emulsions showed good physical and oxidative stability during storage. In particular, the methylcellulose with high methoxyl substituents (HMC) made it possible to obtain emulsions with high consistency which remained almost unchanged during gastric digestion, and thus could enhance fullness and satiety perceptions at gastric level. Moreover, the HMC emulsion slowed down lipid digestion to a greater extent than a conventional protein emulsion or the emulsions stabilised by the other cellulose ethers. Therefore, HMC emulsions could be used in weight management to increase satiation capacity and decrease lipid digestion.

Optimisation of industrial wastes reuse as construction materials.

PubMed

Collivignarelli, C; Sorlini, S

2001-12-01

This study concerns the reuse of two inorganic wastes, foundry residues and fly ashes from municipal solid waste incineration, as "recycled aggregate" in concrete production. This kind of reuse was optimised by waste treatment with the following steps: waste washing with water; waste stabilisation-solidification treatment with inorganic reagents; final grinding of the stabilised waste after curing for about 10-20 days. Both the treated wastes were reused in concrete production with different mix-designs. Concrete specimens were characterised by means of conventional physical-mechanical tests (compression, elasticity modulus, shrinkage) and different leaching tests. Experimental results showed that a good structural and environmental quality of "recycled concrete" is due both to a correct waste treatment and to a correct mix-design for concrete mixture.

The dual algebraic Riccati equations and the set of all solutions of the discrete-time Riccati equation

NASA Astrophysics Data System (ADS)

Zhang, Liangyin; Chen, Michael Z. Q.; Li, Chanying

2017-07-01

In this paper, two new pairs of dual continuous-time algebraic Riccati equations (CAREs) and dual discrete-time algebraic Riccati equations (DAREs) are proposed. The dual DAREs are first studied with some nonsingularity assumptions on the system matrix and the parameter matrix. Then, in the case of singular matrices, a generalised inverse is introduced to deal with the dual DARE problem. These dual AREs can easily lead us to an iterative procedure for finding the anti-stabilising solutions, especially to DARE, by means of that for the stabilising solutions. Furthermore, we provide the counterpart results on the set of all solutions to DARE inspired by the results for CARE. Two examples are presented to illustrate the theoretical results.

Regional robust stabilisation and domain-of-attraction estimation for MIMO uncertain nonlinear systems with input saturation

NASA Astrophysics Data System (ADS)

Azizi, S.; Torres, L. A. B.; Palhares, R. M.

2018-01-01

The regional robust stabilisation by means of linear time-invariant state feedback control for a class of uncertain MIMO nonlinear systems with parametric uncertainties and control input saturation is investigated. The nonlinear systems are described in a differential algebraic representation and the regional stability is handled considering the largest ellipsoidal domain-of-attraction (DOA) inside a given polytopic region in the state space. A novel set of sufficient Linear Matrix Inequality (LMI) conditions with new auxiliary decision variables are developed aiming to design less conservative linear state feedback controllers with corresponding larger DOAs, by considering the polytopic description of the saturated inputs. A few examples are presented showing favourable comparisons with recently published similar control design methodologies.

NATO Human Resources (Manpower) Management (Gestion des ressources humaines (effectifs) de l’OTAN)

DTIC Science & Technology

2012-02-01

performances , la gestion des récompenses et du salaire, et la motivation du personnel. En conséquence, il faut que la gestion des ressources humaines...importance au fil du temps. Les ressources humaines, chargées à l’origine de l’embauche, du licenciement, de la paie et de la gestion des ...les effets des systèmes d’évaluation des performances ;

Determination dans les Installations au Sol des Parametres Aerodynamiques de Stabilite des Aeronefs (Determination in Ground Facilities of Aerodynamic Stability Parameters of Aircraft),

DTIC Science & Technology

1979-06-01

7 INTRODUCTION ...................................................................................... 12 CHAPITRE I : ELEMENTS DE DYNAMIQUE...daone Ie texts. 12 INTRODUCTION La ddtermination des ddrivdes adrodynamiques de stabilitd, en soufflerie et au tunnel de tir, aur des maquettes...ddtection des forces eat effectuds de fegon classiqus depuis plus de vingt ana par des barreaux d’acier dquipds de jauges de contrainte, gdndralament en

Electronic Messaging for the 90s (Les Messageries Electroniques des Annees 90)

DTIC Science & Technology

1993-05-01

des autres unitds (un programme peut par exemple inclure un algorithme de 2. L CICULAIONDE ’INFRMAION recherche dans des donn~es...dit quc le rdseau, en particulier le r.dseau distant, cette coopdration homme /macbine. aifre des performances bien infirieures A celles des ordinateurs...dans ce sens, entre constructeurs d’ordinateurs, des opdrations traitementltransport. constructeurs didquipements de t~ l ~communications et exploitants de

Using the verona coding definitions of emotional sequences (VR-CoDES) and health provider responses (VR-CoDES-P) in the dental context.

PubMed

Wright, Alice; Humphris, Gerry; Wanyonyi, Kristina L; Freeman, Ruth

2012-10-01

To show if cues, concerns and provider responses (defined in VR-CoDES and VR-CoDES-P manuals) are present, can be reliably coded and require additional advice for adoption in a dental context. Thirteen patients in a dental practice setting were videoed with either their dentist or hygienist and dental nurse present in routine treatment sessions. All utterances were coded using the Verona systems: VR-CoDES and the VR-CoDES-P. Rates of cue, concerns and provider responses described and reliability tested. The VR-CoDES and VR-CoDES-P were successfully applied in the dental context. The intra-rater ICCs for the detection of cues and concerns and provider response were acceptable and above 0.75. A similar satisfactory result was found for the inter-rater reliability. The VR-CoDES and the VR-CoDES-P are applicable in the dental setting with minor supporting guidelines and show evidence of reliable coding. The VR-CoDES and the VR-CoDES-P may be helpful tools for analysing patient cues and concerns and the dental professionals' responses in the dental context. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Etude de pratiques d'enseignement relatives a la modelisation en sciences et technologies avec des enseignants du secondaire

NASA Astrophysics Data System (ADS)

Aurousseau, Emmanuelle

Les modeles sont des outils amplement utilises en sciences et technologies (S&T) afin de representer et d’expliquer un phenomene difficilement accessible, voire abstrait. La demarche de modelisation est presentee de maniere explicite dans le programme de formation de l’ecole quebecoise (PFEQ), notamment au 2eme cycle du secondaire (Quebec. Ministere de l'Education du Loisir et du Sport, 2007a). Elle fait ainsi partie des sept demarches auxquelles eleves et enseignants sont censes recourir. Cependant, de nombreuses recherches mettent en avant la difficulte des enseignants a structurer leurs pratiques d’enseignement autour des modeles et de la demarche de modelisation qui sont pourtant reconnus comme indispensables. En effet, les modeles favorisent la conciliation des champs concrets et abstraits entre lesquels le scientifique, meme en herbe, effectue des allers-retours afin de concilier le champ experimental de reference qu’il manipule et observe au champ theorique relie qu’il construit. L’objectif de cette recherche est donc de comprendre comment les modeles et la demarche de modelisation contribuent a faciliter l’articulation du concret et de l’abstrait dans l’enseignement des sciences et des technologies (S&T) au 2eme cycle du secondaire. Pour repondre a cette question, nous avons travaille avec les enseignants dans une perspective collaborative lors de groupes focalises et d’observation en classe. Ces dispositifs ont permis d’examiner les pratiques d’enseignement que quatre enseignants mettent en oeuvre en utilisant des modeles et des demarches de modelisation. L’analyse des pratiques d’enseignement et des ajustements que les enseignants envisagent dans leur pratique nous permet de degager des connaissances a la fois pour la recherche et pour la pratique des enseignants, au regard de l’utilisation des modeles et de la demarche de modelisation en S&T au secondaire.

Effets des electrons secondaires sur l'ADN

NASA Astrophysics Data System (ADS)

Boudaiffa, Badia

Les interactions des electrons de basse energie (EBE) representent un element important en sciences des radiations, particulierement, les sequences se produisant immediatement apres l'interaction de la radiation ionisante avec le milieu biologique. Il est bien connu que lorsque ces radiations deposent leur energie dans la cellule, elles produisent un grand nombre d'electrons secondaires (4 x 104/MeV), qui sont crees le long de la trace avec des energies cinetiques initiales bien inferieures a 20 eV. Cependant, il n'y a jamais eu de mesures directes demontrant l'interaction de ces electrons de tres basse energie avec l'ADN, du principalement aux difficultes experimentales imposees par la complexite du milieu biologique. Dans notre laboratoire, les dernieres annees ont ete consacrees a l'etude des phenomenes fondamentaux induits par impact des EBE sur differentes molecules simples (e.g., N2, CO, O2, H2O, NO, C2H 4, C6H6, C2H12) et quelques molecules complexes dans leur phase solide. D'autres travaux effectues recemment sur des bases de l'ADN et des oligonucleotides ont montre que les EBE produisent des bris moleculaires sur les biomolecules. Ces travaux nous ont permis d'elaborer des techniques pour mettre en evidence et comprendre les interactions fondamentales des EBE avec des molecules d'interet biologique, afin d'atteindre notre objectif majeur d'etudier l'effet direct de ces particules sur la molecule d'ADN. Les techniques de sciences des surfaces developpees et utilisees dans les etudes precitees peuvent etre etendues et combinees avec des methodes classiques de biologie pour etudier les dommages de l'ADN induits par l'impact des EBE. Nos experiences ont montre l'efficacite des electrons de 3--20 eV a induire des coupures simple et double brins dans l'ADN. Pour des energies inferieures a 15 eV, ces coupures sont induites par la localisation temporaire d'un electron sur une unite moleculaire de l'ADN, ce qui engendre la formation d'un ion negatif transitoire dans un etat electronique dissociatif, cette localisation est suivie d'une fragmentation. A plus haute energie, la dissociation dipolaire (i.e., la formation simultanee d'un ion positif et negatif) et l'ionisation jouent un role important dans le dommage de l'ADN. L'ensemble de nos resultats permet d'expliquer les mecanismes de degradation de l'ADN par les EBE et d'obtenir des sections efficaces effectives des differents types de dommages.

PubMed

Belaid, Loubna; Cloos, Patrick; Ridde, Valéry

2017-04-20

Cette étude vise à décrire la mobilisation des représentations ethnoculturelles par des agents et des gestionnaires de santé pour expliquer l'échec partiel d'une politique de santé maternelle et discuter des conséquences potentielles de ces représentations sur l'accès aux soins de santé des populations.MÉTHODES : Il s'agit d'une recherche qualitative de type socio-anthropologique mobilisant des entretiens approfondis, des discussions informelles, des observations non participantes menées dans les centres de santé et une analyse documentaire. Les entretiens ont été menés auprès de 16 agents de santé et de 10 gestionnaires. Les entretiens ont été enregistrés sous support numérique et transcrits. L'étude s'est déroulée dans le district sanitaire de Djibo au Burkina Faso.RÉSULTATS : L'identification ethnique, les coutumes relatives à l'accouchement (pudeur, discrétion, présence féminine), le statut social des femmes (le faible pouvoir décisionnel), le nomadisme et l'organisation sociale des populations et leurs résistances au changement sont érigés comme des obstacles « culturels » à la politique de santé. L'usage largement répandu de ces représentations par les agents et les gestionnaires de santé contribue à réprimander les populations et à masquer les facteurs structurels qui ont pourtant une influence plus importante sur l'utilisation des services de santé maternelle. Cette recherche met en lumière le danger de l'usage excessif des représentations ethnoculturelles teintées de culturalisme dans les pratiques et les politiques de santé publique en véhiculant des stéréotypes à l'égard de certains groupes de population. Pour comprendre le succès ou l'échec des politiques sanitaires, il demeure important de considérer la qualité du contact avec le système de santé, les facteurs structurels notamment les capacités des ménages à faire face aux dépenses des soins de santé et des distances entre les villages et les centres de santé. Ces éléments permettraient de mieux comprendre les disparités constatées à l'égard des indicateurs d'utilisation des services de santé.

"Voici des fruits, des fleurs, des feuilles et des branches" et pourquoi pas des legumes? ("Here are Fruits, Flowers, Leaves, and Branches" and Why Not Vegetables?).

ERIC Educational Resources Information Center

van Zundert, Danielle

1986-01-01

Describes an experiment in teaching language to young children through nature study. Activities are outlined, including the linguistic, cognitive, and cultural objectives for each. Brief illustrated descriptions are also given. (MSE)

US Army Morale, Welfare and Recreation (MWR) Programmes : Links to Readiness and Retention

DTIC Science & Technology

2011-01-01

la Direction des opérations, Bureau du sous-chef d’état-major pour la ... gestion des emprises et garnisons de l’US Army, Washington, DC. Il enseigne au Département de philosophie du Northern Virginia Community College...américaine à l’intention des personnels militaires et des familles, et des variables mesurant l’état de préparation des forces et la fidélisation de

Aircraft Disinsection: A Guide for Military and Civilian Air Carriers (Desinsectisation des aeronefs: Un guide a l’intention des responsables des transports aeriens civils et militaires)

DTIC Science & Technology

1996-04-01

regulations. - Ceratitis capitata (Mediterranean fruit fly). Quarantine regulations generally reduce - Rhagoletis pomonella (Apple maggot). the chances of a...d’insectes nuisibles dans un pays, en 6vitant des risques pour la sant6 des 6quipages, pour la s~curit6 de 1’a~ronef et pour l’industrie. Ce rapport examine 1...diffrrents officiels responsables de la r~glementation des insectes nuisibles introduits, de l’inscription des pesticides et de leur utilisation en

Contrôler la douleur et réduire l’usage abusif d’opioïdes

PubMed Central

Kotalik, Jaro

2012-01-01

Résumé Objectif Aider les médecins de famille à faire un juste équilibre sur le plan de l’éthique dans leurs pratiques de prescription d’opioïdes. Source des données Une recension des articles en anglais publiés entre 1985 et 2011 a été effectuée dans MEDLINE. La majorité des données probantes étaient de niveau III. Message principal Il est essentiel de suivre les guides de pratique clinique quand on prescrit des opioïdes, sauf s’il est démontré qu’une autre option est justifiée. De plus, quand on réfléchit à la pertinence de prescrire des opioïdes et aux nombreuses implications sur le plan de l’éthique, il est utile de fonder sa décision sur l’application des principes éthiques de la bienfaisance, de la non-malfaisance, du respect de l’autonomie et de la justice. En outre, il est essentiel de se tenir au fait des changements dans les lois et la règlementation, ainsi qu’à propos des registres électroniques provinciaux des ordonnances d’opioïdes. Conclusion Les médecins doivent s’assurer que la douleur de leurs patients est bien évaluée et prise en charge. Le contrôle optimal de la douleur peut exiger la prescription d’opioïdes. Cependant, l’obligation de soulager la douleur doit être exercée en juste équilibre avec l’acquittement de la responsabilité tout aussi importante de ne pas exposer les patients au risque de dépendance et de ne pas créer de possibilités de détournement de drogues, de trafic et de dépendance chez d’autres personnes. Les principes éthiques fondamentaux offrent un cadre de réflexion qui peut aider les médecins à prendre des décisions appropriées sur le plan de l’éthique au sujet de la prescription d’opioïdes.

Approche à l’endroit des blessures traumatiques à la main en soins primaires

PubMed Central

Cheung, Kevin; Hatchell, Alexandra; Thoma, Achilleas

2013-01-01

Résumé Objectif Passer en revue la prise en charge initiale des blessures traumatiques communes à la main que voient les médecins de soins primaires. Sources des données Nous avons examiné les données cliniques probantes et les ouvrages spécialisés récents cernés par des recherches dans la base de données électronique MEDLINE. Nous avons utilisé l’opinion d’experts pour compléter les recommandations dans les domaines où les données scientifiques étaient rares. Message principal Les médecins de soins primaires sont couramment appelés à prendre en charge des patients victimes de blessures traumatiques à la main. Dans le contexte d’un cas clinique, nous examinons l’évaluation, le diagnostic et la prise en charge initiale des traumatismes communs à la main. La présentation et la prise en charge des blessures au lit de l’ongle, des amputations de l’extrémité du doigt, des doigts en maillet, des fractures à la main, des lacérations de tendons, des morsures et de la ténosynovite infectieuse seront aussi discutées. Les principes de la prise en charge des blessures traumatiques à la main comportent la réduction et l’immobilisation des fractures, la prescription d’imagerie radiographique post-réduction, l’obtention d’un recouvrement par les tissus mous, la prévention et le traitement des infections et l’assurance d’une prophylaxie antitétanique. Conclusion Il est essentiel d’assurer une évaluation et une prise en charge appropriées des blessures traumatiques à la main pour prévenir une morbidité considérable à long terme dans une population autrement en santé. La reconnaissance sans délai des blessures qui nécessitent une demande de consultation urgente ou rapide auprès d’un chirurgien spécialiste de la main est également critique.

Relation entre les caractéristiques des table-bancs et les mesures anthropométriques des écoliers au Benin

PubMed Central

Falola, Stève Marjelin; Gouthon, Polycarpe; Falola, Jean-Marie; Fiogbe, Michel Armand; Nigan, Issiako Bio

2014-01-01

Introduction Le mobilier scolaire et la posture assise en classe sont souvent impliqués dans l'apparition des douleurs rachidiennes, influant de fait sur la qualité des tâches réalisées par les apprenants. Aucune étude n'a encore vérifié le degré d'adéquation entre les caractéristiques du mobilier et celles des écoliers au Bénin. L'objectif de cette étude transversale est donc de déterminer la relation entre les dimensions des table-bancs utilisées en classe et les mesures anthropométriques des écoliers au Bénin. Methods Elle a été réalisée avec un échantillon probabiliste de 678 écoliers, âgés de 4 à 17 ans. Les mesures anthropométriques des écoliers et les mensurations relatives aux longueurs, largeurs et hauteurs des table-bancs ont été mesurées, puis intégrées aux équations proposées dans la littérature. Les pourcentages des valeurs situées hors des limitesacceptables, dérivées de l'application des équations ont été calculés. Results La largeur et la hauteur des table-bancs utilisées par les écoliers étaient plus élevées (p < 0,05) que les valeurs de référence recommandées par les structures officielles de contrôle et de production des mobiliers scolaires au Bénin. Quel que soit le sexe, il y avait une inadéquation entre la largeur du banc et la longueur fesse-poplité, puis entre la hauteur de la table et la distance coude-bancdes écoliers. Conclusion Les résultats suggèrent de prendre en compte l’évolution des mesures anthropométriques des écoliers dans la confection des table-bancs, afin de promouvoir de bonnes postures assises en classe et de réduire le risque de troubles du rachis. PMID:25317232

Guide de pratique clinique pour les lésions cérébrales traumatiques légères et les symptômes persistants

PubMed Central

Marshall, Shawn; Bayley, Mark; McCullagh, Scott; Velikonja, Diana; Berrigan, Lindsay

2012-01-01

Résumé Objectif Présenter les nouvelles lignes directrices sur la prise en charge des lésions cérébrales traumatiques légères (LCTL) et les symptômes persistants post-commotion (SPPC) afin de renseigner et d’orienter les médecins qui prennent en charge des patients qui se remettent d’une LCTL. Qualité des données On a effectué une recherche des guides de pratique clinique existants portant sur les LCTL et une synthèse critique des ouvrages scientifiques évaluant le traitement des SPPC. Étant donné la rareté des conseils sur la prise en charge des SPPC dans les travaux sur les lésions cérébrales traumatiques, une deuxième recherche documentaire a été faite pour recenser les guides de pratique clinique et les synthèses critiques concernant la prise en charge de ces symptômes communs dans la population en général. On a convoqué des professionnels de la santé provenant de différentes disciplines et régions du Canada et de l’étranger à une conférence consensuelle d’experts pour examiner les lignes directrices et les données probantes existantes et élaborer un guide complet pour la prise en charge des LCTL et des SPPC. Message principal À l’aide d’un processus Delphi modifié, on a produit 71 recommandations portant sur le diagnostic et la prise en charge des LCTL et des SPPC. De plus, on a inclus dans le guide de nombreuses ressources et des outils pour faciliter la mise en œuvre des recommandations. Conclusion Un guide de pratique clinique a été élaboré pour aider les professionnels de la santé à fournir des soins fondés sur les données probantes et les pratiques exemplaires à la population complexe de personnes qui ont des SPPC à la suite d’une LCTL.

La singularité du patient tuberculeux dans le système de santé: l'expérience du Burkina Faso

PubMed Central

Zerbo, Roger

2013-01-01

La démarche pluridisciplinaire s'impose de plus en plus dans le secteur de la santé dans le contexte africain, où les parcours thérapeutiques sont pluriels et les rapports des usagers des centres de santé sont complexes et peu satisfaisants. La compréhension des représentations de la maladie est nécessaire pour offrir des soins appropriés certes, mais l'expérience individuelle des malades représente également une source de savoir. Les données ont été collectées à travers des entretiens semi-directifs, le recueil des récits de vie et des observations participantes. Cet article rend compte d'une expérience d'implication de socio-anthropologue dans la mise en œuvre d'un programme de santé publique au Burkina Faso en vue d'une amélioration de la prise en charge des malades tuberculeux. L'analyse des données à été conduite dans une visée réflexive. Les perspectives socio-anthropologiques ont révélé que l'expérience des anciens malades tuberculeux peut être mise à profit afin d'apporter des changements dans les relations thérapeutiques et l'intégration sociale des autres malades. Cette idée à été mise en application pour tenir lieu d'une traduction des analyses anthropologiques en actes pour un changement. L'article évoque la manière dont l'approche socio-anthropologique au sein d'un programme de santé, peut mettre en évidence le potentiel des malades à être des acteurs importants dans le fonctionnement des services de soins et leur propre bien-être. Dans cette situation, la démarche théorique implique la réflexivité de l'anthropologue, mais également un regard critique sur les modes d'intervention en santé publique. PMID:24009798

Influence du comportement des accompagnants sur le vécu des patients admis pour hémorragies digestives hautes au CHU campus de Lomé (Togo)

PubMed Central

Bagny, Aklesso; Dusabe, Angelique; Bouglouga, Oumboma; Lawson-ananisoh, Mawuli Late; Kaaga, Yeba Laconi; Djibril, Mohaman Awalou; Soedje, Kokou Mensah; Dassa, Simliwa Kolou; Redah, Datouda

2014-01-01

Introduction L'hémorragie digestive haute est une urgence, qui constitue souvent pour les patients un danger mortel suscitant inquiétude et agitation. Dans cet état, le patient dépend de ses accompagnants pour ses soins et pour honorer le traitement; mais souvent, il a été observé une discordance entre l'urgence et les comportements des accompagnants. Le but de cette étude était de décrire les facteurs socioéconomiques et psychologiques pouvant influencer les comportements des accompagnants des patients admis pour HDH, estimer l'indice de relation entre ces comportements et les facteurs associés d'une part et le vécu des patients admis pour HDH d'autre part. Méthodes Il s'agit d'une étude prospective menée de Septembre 2010 à Juin 2011 (soit 10 mois). Nous avions utilisé l'entretien semi-dirigé et l'observation directe pour collecter nos données, ces dernières avaient été traitées par les méthodes statistiques et d'analyse de contenu. Résultats Dans la présente étude, les comportements des accompagnants des patients admis pour HDH sont en majorité marqués par l'abandon (84%) et le manque de sollicitude (80,2%). Ces comportements sont souvent stimulés par les facteurs socioéconomiques tels que les difficultés économiques (83,2%), des conflits intrafamiliaux (85,1%) et des représentations (maladie incurable ou envoûtement) de la maladie par les accompagnants (73,3%) des cas. Quant aux patients, ils vivent ces comportements comme étant des menaces de mort ou des rejets (77,20%) et comme étant une dévalorisation ou une humiliation de la part de leurs accompagnants (70,30%). Les résultats confirment l'existence de lien significatif entre les comportements des accompagnants et les facteurs socio économiques, entre les comportements des accompagnants et des facteurs psychologiques, et entre le vécu des patients admis pour l'HDH et les comportements des accompagnants. Conclusion Des études ultérieures devraient aborder les points non touchés dans cette étude. Certes, elle a apporté un plus dans la compréhension du vécu des patients admis pour HDH et des comportements de leurs accompagnants. Cependant, elle est loin d'avoir épuisé les différents contours de la problématique de la présente étude. PMID:25848453

Caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques (LPIM) =

NASA Astrophysics Data System (ADS)

Fareh, Fouad

Le moulage par injection basse pression des poudres metalliques est une technique de fabrication qui permet de fabriquer des pieces possedant la complexite des pieces coulees mais avec les proprietes mecaniques des pieces corroyees. Cependant, l'optimisation des etapes de deliantage et de frittage a ete jusqu'a maintenant effectuee a l'aide de melange pour lesquels la moulabilite optimale n'a pas encore ete demontree. Ainsi, la comprehension des proprietes rheologiques et de la segregation des melanges est tres limitee et cela presente le point faible du processus de LPIM. L'objectif de ce projet de recherche etait de caracteriser l'influence des liants sur le comportement rheologique des melanges en mesurant la viscosite et la segregation des melanges faible viscosite utilises dans le procede LPIM. Afin d'atteindre cet objectif, des essais rheologiques et thermogravimetriques ont ete conduits sur 12 melanges. Ces melanges ont ete prepares a base de poudre d'Inconel 718 de forme spherique (chargement solide constant a 60%) et de cires, d'agents surfactants ou epaississants. Les essais rheologiques ont ete utilises entre autre pour calculer l'indice d'injectabilite ?STV des melanges, tandis que les essais thermogravimetriques ont permis d'evaluer precisement la segregation des poudres dans les melanges. Il a ete demontre que les trois (3) melanges contenant de la cire de paraffine et de l'acide stearique presentent des indices alpha STV plus eleves qui sont avantageux pour le moulage par injection des poudres metalliques (MIM), mais segregent beaucoup trop pour que la piece fabriquee produise de bonnes caracteristiques mecaniques. A l'oppose, le melange contenant de la cire de paraffine et de l'ethylene-vinyle acetate ainsi que le melange contenant seulement de la cire de carnauba segregent peu voire pas du tout, mais possedent de tres faibles indices alphaSTV : ils sont donc difficilement injectables. Le meilleur compromis semble donc etre les melanges contenant de la cire (de paraffine, d'abeille et de carnauba) et de faible teneur en acide stearique et en ethylene-vinyle acetate. Par ailleurs, les lois physiques preexistantes ont permis de confirmer les resultats des essais rheologiques et thermogravimetriques, mais aussi de mettre en evidence l'influence de la segregation sur les proprietes rheologiques des melanges. Ces essais ont aussi montre l'effet de constituants de liant et du temps passe a l'etat fondu sur l'intensite de la segregation dans les melanges. Les melanges contenants de l'acide stearique segregent rapidement. La caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques doit etre obtenue a l'aide d'une methode de courte duree pour eviter la segregation et de mesurer precisement l'aptitude a l'ecoulement de ces melanges.

Etude de l'amelioration de la qualite des anodes par la modification des proprietes du brai

NASA Astrophysics Data System (ADS)

Bureau, Julie

La qualite des anodes produites se doit d'etre bonne afin d'obtenir de l'aluminium primaire tout en reduisant le cout de production du metal, la consommation d'energie et les emissions environnementales. Or, l'obtention des proprietes finales de l'anode necessite une liaison satisfaisante entre le coke et le brai. Toutefois, la matiere premiere actuelle n'assure pas forcement la compatibilite entre le coke et le brai. Une des solutions les plus prometteuses, pour ameliorer la cohesion entre ces deux materiaux, est la modification des proprietes du brai. L'objectif de ce travail consiste a modifier les proprietes du brai par l'ajout d'additifs chimiques afin d'ameliorer la mouillabilite du coke par le brai modifie pour produire des anodes de meilleure qualite. La composition chimique du brai est modifiee en utilisant des tensioactifs ou agents de modification de surface choisis dans le but d'enrichir les groupements fonctionnels susceptibles d'ameliorer la mouillabilite. L'aspect economique, l'empreinte environnementale et l'impact sur la production sont consideres dans la selection des additifs chimiques. Afin de realiser ce travail, la methodologie consiste a d'abord caracteriser les brais non modifies, les additifs chimiques et les cokes par la spectroscopie infrarouge a transformee de Fourier (FTIR) afin d'identifier les groupements chimiques presents. Puis, les brais sont modifies en ajoutant un additif chimique afin de possiblement modifier ses proprietes. Differentes quantites d'additif sont ajoutees afin d'examiner l'effet de la variation de la concentration sur les proprietes du brai modifie. La methode FTIR permet d'evaluer la composition chimique des brais modifies afin de constater si l'augmentation de la concentration d'additif enrichit les groupements fonctionnels favorisant l'adhesion coke/brai. Ensuite, la mouillabilite du coke par le brai est observee par la methode goutte- sessile. Une amelioration de la mouillabilite par la modification a l'aide d'un additif chimique signifie une possible amelioration de l'interaction entre le coke et le brai modifie. Afin de completer l'evaluation des donnees recueillies, les resultats de la FTIR et de la mouillabilite sont analyses par le reseau neuronal artificiel afin de mieux comprendre les mecanismes sous-jacents. A la lumiere des resultats obtenus, les additifs chimiques les plus prometteurs sont selectionnes afin de verifier l'effet de leur utilisation sur la qualite des anodes. Pour ce faire, des anodes de laboratoire sont produites en utilisant des brais non modifies et des brais modifies avec les additifs chimiques selectionnes. Par la suite, les anodes sont carottees afin de les caracteriser en determinant certaines de leurs proprietes physiques et chimiques. Enfin, les resultats des echantillons d'anodes faites d'un meme brai non modifie et modifie sont compares afin d'evaluer l'amelioration de la qualite des anodes. Finalement, un examen de l'impact possible de l'utilisation d'un additif chimique pour modifier le brai sur la consommation energetique et en carbone ainsi que la quantite d'aluminium produit est realise. Afin de modifier le brai, trois differents additifs chimiques sont selectionnes, soit un tensioactif et deux agents de modification de surface. L'analyse FTIR des experimentations menees sur les brais modifies demontre que deux additifs ont modifie la composition chimique des brais experimentes. L'analyse des resultats des tests goutte-sessile laisse supposer qu'un brai modifie par ces deux additifs ameliore possiblement l'interaction avec les cokes employes dans cette etude. L'analyse par reseau neuronal artificiel des donnees recueillies permet de mieux comprendre le lien entre la composition chimique d'un brai et sa capacite de mouillabilite avec un coke. La caracterisation des echantillons d'anodes produites permet d'affirmer que ces deux additifs peuvent ameliorer certaines des proprietes anodiques comparativement aux echantillons standards. L'analyse des resultats demontre que l'un des deux additifs semble donner des resultats plus prometteurs. Au final, les travaux realises au cours de ce projet demontrent qu'il est possible d'ameliorer la qualite anodique en modifiant les proprietes du brai. De plus, l'analyse des resultats obtenus fournit une meilleure comprehension des mecanismes entre un brai et un additif chimique.

Les conseils des cliniciens canadiens en matière de commotion dans le sport sont-ils cohérents?

PubMed Central

Carson, James D.; Rendely, Alexandra; Garel, Alisha; Meaney, Christopher; Stoller, Jacqueline; Kaicker, Jatin; Hayden, Leigh; Moineddin, Rahim; Frémont, Pierre

2016-01-01

Résumé Objectif Comparer les connaissances et l’utilisation des recommandations concernant la prise en charge de la commotion dans le sport (CDS) démontrées par les spécialistes de la médecine du sport et de l’exercice (SMSE) et les urgentologues afin d’évaluer la réussite du transfert des connaissances sur la CDS au Canada. Conception Un sondage à choix multiples envoyé par courriel et autoadministré par des SMSE et des urgentologues. La validité du contenu du sondage a fait l’objet d’une évaluation. Contexte Canada. Participants Le sondage a été complété entre mai et juillet 2012 par des SMSE qui ont réussi l’examen menant au diplôme de l’Académie canadienne de la médecine du sport et de l’exercice et des urgentologues qui n’avaient pas ce diplôme. Principaux paramètres à l’étude La connaissance et l’identification des sources d’information sur la prise en charge des commotions, l’utilisation des stratégies de diagnostic de la commotion et l’utilisation d’une terminologie courante et cohérente dans l’explication des stratégies de repos aux patients après une CDS. Résultats Le taux de réponse était de 28 % (305 sur 1085). Les taux de réponse par les SMSE et les urgentologues se situaient respectivement à 41 % (147 sur 360) et 22 % (158 sur 725). Parmi les répondants, 41 % des urgentologues et 3 % des SMSE n’étaient pas au courant de l’existence de déclarations consensuelles sur la commotion dans le sport; 74 % des SMSE utilisaient « habituellement ou toujours » la version 2 de l’Outil d’évaluation de la commotion dans le sport (SCAT2), tandis que 88 % des urgentologues n’utilisaient jamais le SCAT2. Aucune réponse uniforme n’a été documentée à la question visant à connaître les meilleurs modes de repos cognitif. Conclusion Nous avons cerné des différences et un manque d’uniformité chez les SMSE et les urgentologues dans la mise en application des recommandations concernant les patients ayant subi une CDS. Il semble que le SCAT2 soit davantage utilisé dans le milieu des SMSE que dans le contexte de l’urgence. Des efforts plus poussés de transfert des connaissances et en recherche devraient atténuer les obstacles à des conseils plus uniformes donnés par les médecins qui soignent des patients ayant subi une CDS.

Soins primaires aux adultes ayant une déficience développementale

PubMed Central

Sullivan, William F.; Berg, Joseph M.; Bradley, Elspeth; Cheetham, Tom; Denton, Richard; Heng, John; Hennen, Brian; Joyce, David; Kelly, Maureen; Korossy, Marika; Lunsky, Yona; McMillan, Shirley

2011-01-01

Résumé Objectif Mettre à jour les lignes directrices canadiennes de 2006 sur les soins primaires aux adultes ayant une déficience développementale (DD) et présenter des recommandations pratiques fondées sur les connaissances actuelles pour traiter des problèmes de santé particuliers chez des adultes ayant une DD. Qualité des preuves Des professionnels de la santé expérimentés participant à un colloque et un groupe de travail subséquent ont discuté et convenu des révisions aux lignes directrices de 2006 en se fondant sur une recherche documentaire exhaustive, la rétroaction obtenue des utilisateurs du guide de pratique et les expériences cliniques personnelles. La plupart des preuves disponibles dans ce domaine viennent de l’opinion d’experts ou de déclarations consensuelles publiées (niveau III). Message principal Les adultes ayant une DD ont des problèmes de santé complexes, dont plusieurs diffèrent de ceux de la population en général. De bons soins primaires permettent d’identifier les problèmes de santé particuliers dont souffrent les adultes ayant une DD pour améliorer leur qualité de vie et leur accès aux soins de santé et prévenir la morbidité et le décès prématuré. Ces lignes directrices résument les problèmes de santé générale, physique, comportementale et mentale des adultes ayant une DD que devraient connaître les professionnels des soins primaires et présentent des recommandations pour le dépistage et la prise en charge en se basant sur les connaissances actuelles que les cliniciens peuvent mettre en pratique. En raison de l’interaction des facteurs biologiques, psychoaffectifs et sociaux qui contribuent à la santé et au bien-être des adultes ayant une DD, ces lignes directrices insistent sur la participation des aidants, l’adaptation des interventions, au besoin, et la consultation auprès de divers professionnels de la santé quand ils sont accessibles. Elles mettent aussi en évidence la nature éthique des soins. Les lignes directrices sont formulées dans le contexte d’un cadre éthique qui tient compte des questions comme le consentement éclairé et l’évaluation des bienfaits pour la santé par rapport aux risques de préjudice. Conclusion La mise en œuvre des lignes directrices proposées ici améliorerait la santé des adultes ayant une DD et minimiserait les disparités sur les plans de la santé et des soins de santé entre les adultes ayant une DD et la population en général.

Prenatal diethylstilbestrol induces malformation of the external genitalia of male and female mice and persistent second-generation developmental abnormalities of the external genitalia in two mouse strains

PubMed Central

Mahawong, Phitsanu; Sinclair, Adriane; Li, Yi; Schlomer, Bruce; Rodriguez, Esequiel; Max, Ferretti M.; Liu, Baomei; Baskin, Laurence S.; Cunha, Gerald R.

2014-01-01

Potential trans-generational influence of diethylstilbestrol (DES) exposure emerged with reports of effects in grandchildren of DES-treated pregnant women and of reproductive tract tumors in offspring of mice exposed in utero to DES. Accordingly, we examined the trans-generational influence of DES on development of external genitalia (ExG) and compared effects of in utero DES exposure in CD-1 and C57BL/6 mice injected with oil or DES every other day from gestational days 12 to 18. Mice were examined at birth, and on 5 to 120 days postnatal to evaluate ExG malformations. Of 23 adult (≥60 days) prenatally DES-exposed males, features indicative of urethral meatal hypospadias (see text for definitions) ranged from 18 to 100% in prenatally DES-exposed CD-1 males and 31 to 100% in prenatally DES-exposed C57BL/6 males. Thus, the strains differed in the incidence of male urethral hypospadias. Ninety-one percent of DES-exposed CD-1 females and 100% of DES-exposed C57BL/6 females had urethral-vaginal fistula. All DES-exposed CD-1 and C57BL/6 females lacked an os clitoris. None of the prenatally oil-treated CD-1 and C57BL/6 male and female mice had ExG malformations. For the second-generation study, 10 adult CD-1 males and females, from oil- and DES-exposed groups, respectively, were paired with untreated CD-1 mice for 30 days, and their offspring evaluated for ExG malformations. None of the F1 DES-treated females were fertile. Nine of 10 prenatally DES-exposed CD-1 males sired offspring with untreated females, producing 55 male and 42 female pups. Of the F2 DES-lineage adult males, 20% had exposed urethral flaps, a criterion of urethral meatal hypospadias. Five of 42 (11.9%) F2 DES lineage females had urethral-vaginal fistula. In contrast, all F2 oil-lineage males and all oil-lineage females were normal. Thus, prenatal DES exposure induces malformations of ExG in both sexes and strains of mice, and certain malformations are transmitted to the second-generation. PMID:25449352

Mise au point du rheometre a cisaillement annulaire pour l'etude de rheologie d'un mastic bitumineux avec verre incorpore =

NASA Astrophysics Data System (ADS)

El Mansouri, Souleimane

Dans le domaine viscoelastique lineaire (VEL, domaine des petites deformations), le comportement thermomecanique du bitume et du mastic bitumineux (melange uniforme de bitume et de fillers) a ete caracterise au Laboratoire des Chaussees et Materiaux Bitumineux (LCMB) de l'Ecole de technologie superieure (ETS) avec l'appui de nos partenaires externes : la Societe des Alcools du Quebec (SAQ) et Eco Entreprises Quebec (EEQ). Les proprietes rheologiques des bitumes et des mastics ont ete mesurees grâce a un nouvel outil d'investigation appele, Rheometre a Cisaillement Annulaire (RCA), sous differentes conditions de chargement. Cet appareil permet non seulement de solliciter des eprouvettes de tailles importantes par rapport a celles utilisees lors des essais classiques, mais aussi d'effectuer des essais en conditions quasi-homogenes, ce qui permet de donner acces a la loi de comportement des materiaux. Les essais sont realises sur une large gamme de temperatures et de frequences (de -15 °C a 45°C et de 0,03Hz a 10 Hz). Cette etude a ete menee principalement pour comparer le comportement d'un bitume avec celui d'un mastic bitumineux dans le domaine des petites deformations. neanmoins, dans une seconde perspective, on s'interesse a l'influence des fillers de verre de post-consommation sur le comportement d'un mastic a faibles niveaux de deformations en comparant l'evolution des modules complexes de cisaillements (G*) d'un mastic avec fillers de verre et un mastic avec fillers conventionnels (calcaire). Enfin, le modele analogique 2S2P1D est utilise pour simuler le comportement viscoelastique lineaire des bitumes et des mastics bitumineux testes lors de la campagne experimentale.

Membrane fluidization by alcohols inhibits DesK-DesR signalling in Bacillus subtilis.

PubMed

Vaňousová, Kateřina; Beranová, Jana; Fišer, Radovan; Jemioła-Rzemińska, Malgorzata; Matyska Lišková, Petra; Cybulski, Larisa; Strzałka, Kazimierz; Konopásek, Ivo

2018-03-01

After cold shock, the Bacillus subtilis desaturase Des introduces double bonds into the fatty acids of existing membrane phospholipids. The synthesis of Des is regulated exclusively by the two-component system DesK/DesR; DesK serves as a sensor of the state of the membrane and triggers Des synthesis after a decrease in membrane fluidity. The aim of our work is to investigate the biophysical changes in the membrane that are able to affect the DesK signalling state. Using linear alcohols (ethanol, propanol, butanol, hexanol, octanol) and benzyl alcohol, we were able to suppress Des synthesis after a temperature downshift. The changes in the biophysical properties of the membrane caused by alcohol addition were followed using membrane fluorescent probes and differential scanning calorimetry. We found that the membrane fluidization induced by alcohols was reflected in an increased hydration at the lipid-water interface. This is associated with a decrease in DesK activity. The addition of alcohol mimics a temperature increase, which can be measured isothermically by fluorescence anisotropy. The effect of alcohols on the membrane periphery is in line with the concept of the mechanism by which two hydrophilic motifs located at opposite ends of the transmembrane region of DesK, which work as a molecular caliper, sense temperature-dependent variations in membrane properties. Copyright © 2017 Elsevier B.V. All rights reserved.

Le patrimoine astronomique provençal

NASA Astrophysics Data System (ADS)

Rous, M.; Figon, P.; Guyot, S.

2012-12-01

L'OSU OAMP/Institut Pythéas porte les missions de conservation, inventaire et valorisation du patrimoine. Suite à la fusion de l'Observatoire de Marseille et du Laboratoire d'Astronomie Spatiale en 2000 pour créer le Laboratoire d'Astrophysique de Marseille, le déménagement des équipes sur le site de Château-Gombert en 2008 a soulevé le problème du devenir des collections des deux sites d'origine. Nous ferons le bilan des actions passées en matière de conservation et de valorisation de ce riche patrimoine : versement à l'inventaire général du Ministère de la Culture, classement de 22 instruments au titre des Monuments Historiques, inventaire et numérisation des archives anciennes, montage d'expositions et réalisation du catalogue Telescopium, 400 ans de lunettes et de télescopes. Nous présenterons les actions en cours: mesures de conservation préventive, inventaire des archives et des instruments. Nous parlerons enfin des projets: création d'un espace d'exposition permanente, participation à des expositions temporaires.

Préface

NASA Astrophysics Data System (ADS)

Schober, Helmut; Fischer, Henry; Leclercq-Hugeux, Françoise

2003-09-01

L'École Thématique “Structure et Dynamique des Systèmes Désordonnés” [1] s'inscrit dans le cadre des écoles organisées sous l'impulsion de la Société Française de la Neutronique (SFN). Elle s'est deroulée en mai 2002 sur la Presqu'île de Giens (Var) en première partie des 11émes Journées de la Diffusion Neutronique. L'Édition de ces cours constitue ainsi le cinquième ouvrage introduisant les techniques neutroniques et leurs apports à differentes thématiques [2]. Le désordre est un facteur déterminant pour pratiquement toutes les propriétés des matériaux. Il est inhérent dans les matériaux amorphes ou liquides, mais il détermine également les propriétés mécaniques et électroniques d'autres composés d'importance technologique comme les matériaux métalliques, dont l'aspect “désordonné” est moins évident. Le désordre enfin joue un rôle essentiel dans tout ce que touche à la vie. En fait, il est difficile d'imaginer des systèmes, à part quelques exceptions rares comme l'hélium ou le silicium de haute pureté, où il n'y ait pas de désordre. En dehors de cet aspect pratique, la description scientifique du désordre atomique pose toujours des problèmes fondamentaux faute de concepts pertinents. Une des tâches importantes du scientifique ou de l'ingenieur est de préciser quel genre de désordre existe à une échelle d'espace et de temps donnée. Un materiau peut très bien être homogène à l'échelle atomique et présenter des défauts ou des hétrogéneité visibles à l'œil et inversement. De même, un système désordonné à un instant donné, peut apparaître ordonné si on moyenne dans le temps. Les techniques de diffusion des neutrons sont idéales pour aborder ces questions. Les neutrons sondent directement les noyaux et ont à la fois des longueurs d'ondes proches des distances inter atomiques et des énergies avoisinant celles des excitations élémentaires de la matière condensée. Ils permettent ainsi une observation directe et non-destructive des positions et des mouvements atomiques. La gamme des distances et des temps sondés par les neutrons autorisent aussi bien de suivre le mouvement des atomes à l'échelle inter atomique que l'évolution d'une structure soit mésoscopique soit macroscopique sur des temps de moins d'une picoseconde à plusieurs heures. La gamme des techniques de diffusion utilisées pour couvrir un tel champ d'application est naturellement très large : différents types de diffractomètres permettent des études de structure atomique trés pointue et résolue dans le temps. Les spectromètres nous donnent accès à la dynamique d'une dizaine de femto- à plusieurs nanosecondes. La diffusion aux petits angles, la reflectomètrie et finalement la tomographie nous permettent de regarder la structure et la dynamique d'objets plus grands. Il était illusoire de prétendre couvrir la totalité des systèmes désordonnés et l'ensemble des techniques de diffusion neutronique pertinentes au cours d'une école de 3 jours. Nous avons donc été amené à nous concentrer sur les liquides, les verres, les cristaux plastiques et les polymères. Ce choix s'est imposé par le souhait d'introduire les concepts de base, en acceptant de sacrifier certains domaines d'applications. Il va de soi que l'étude approfondie de systèmes mettant en jeu plusieurs échelles de distance (structure moléculaire, portée des corrélations entre les molécules) et de temps (relaxations caractéristiques des divers phenomènes dynamiques selon leur extension spatiale) implique une pluralité de techniques expérimentales, complémentaires des différentes techniques neutroniques disponibles. Un des objectifs de cette école etait donc de préciser les domaines de pertinence des différentes techniques neutroniques disponibles en en situant la complémentarité avec d'autres approches instrumentales (diffraction des rayons X, EXAFS, RMN, etc.). Enfin la confrontation avec les résultats obtenus par simulation et modélisation numérique est essentielle à la compréhension des processus élémentaires dans ces systèmes complexes. En première partie de cet ouvrage, on trouvera une description géntrale des systèmes désordonnés et une introduction aux techniques de diffusion de neutrons. Pour la partie concernant la structure, une revue des techniques de diffraction est suivie par des applications à des systèmes de complexité croissante (liquides métalliques simples, alliages liquides, semiconducteurs fondus, solutions aqueuses, verres d'oxydes). L'apport des méthodes de variation de longueur de diffusion (substitution isotopique pour les mesures aux neutrons, diffusion anomale des rayons X ou combinaison de ces deux techniques) permet la détermination des facteurs de structures partiels. Pour la dynamique, on a privilégié une approche introduisant progressivement le désordre en passant des solides aux liquides. Le concept de diffusion puis les particularités dynamiques des verres sont ensuite présentés et illustrés par des exemples concrets. Enfin la dernière partie est consacrée à la simulation numérique des propriétés dynamiques des verres et des liquides et à la modélisation de la structure par méthode de Monte Carlo inverse (RMC) à partir de l'ensemble des données expérimentales existant pour un système donné. La communauté française a joué un rôle important dans le développement des techniques neutroniques dédites à l'étude des systèmes désordonnés et y a acquis une competence reconnue. Nous avons essayé, dans cet ouvrage, de privilégier les aspects pédagogiques des cours, pour les rendre accessibles aux scientifiques francophones non spécialistes en diffusion des neutrons. Nous saluons ici l'effort de rédaction, en langue française, des différents intervenants et souhaitons que cet ouvrage puisse participer à la formation et au renouvellement de la communauté neutronique française. Helmut Schober et Henry Fischer (Editeurs scientifiques) Françoise Leclercq-Hugeux (Présidente de la SFN)

A comprehensive PIV measurement campaign on a fully equipped helicopter model

NASA Astrophysics Data System (ADS)

De Gregorio, Fabrizio; Pengel, Kurt; Kindler, Kolja

2012-07-01

The flow field around a helicopter is characterised by its inherent complexity including effects of fluid-structure interference, shock-boundary layer interaction, and dynamic stall. Since the advancement of computational fluid dynamics and computing capabilities has led to an increasing demand for experimental validation data, a comprehensive wind tunnel test campaign of a fully equipped and motorised generic medium transport helicopter was conducted in the framework of the GOAHEAD project. Different model configurations (with or without main/tail rotor blades) and several flight conditions were investigated. In this paper, the results of the three-component velocity field measurements around the model are surveyed. The effect of the interaction between the main rotor wake and the fuselage for cruise/tail shake flight conditions was analysed based on the flow characteristics downstream from the rotor hub and the rear fuselage hatch. The results indicated a sensible increment of the intensity of the vortex shedding from the lower part of the fuselage and a strong interaction between the blade vortex filaments and the wakes shed by the rotor hub and by the engine exhaust areas. The pitch-up phenomenon was addressed, detecting the blade tip vortices impacting on the horizontal tail plane. For high-speed forward flight, the shock wave formation on the advancing blade was detected, measuring the location on the blade chord and the intensity. Furthermore, dynamic stall on the retreating main rotor blade in high-speed forward flight was observed at r/ R = 0.5 and 0.6. The analysis of the substructures forming the dynamic stall vortex revealed an unexpected spatial concentration suggesting a rotational stabilisation of large-scale structures on the blade.

Quantification des besoins en intrants antipaludiques: contribution à l'actualisation des hypothèses pour la quantification des intrants de prise en charge des cas de paludisme grave en République Démocratique du Congo

PubMed Central

Likwela, Joris Losimba; Otokoye, John Otshudiema

2015-01-01

Les formes graves de paludisme à Plasmodium falciparum sont une cause majeure de décès des enfants de moins de 5 ans en Afrique Sub-saharienne. Un traitement rapide dépend de la disponibilité de médicaments appropriés au niveau des points de prestation de service. La fréquence des ruptures de stock des commodités antipaludiques, en particuliers celles utilisées pour le paludisme grave, avait nécessité une mise à jour des hypothèses de quantification. Les données issues de la collecte de routine du PNLP de 2007 à 2012 ont été comparées à celles rapportés par d'autres pays africains et utilisées pour orienter les discussions au cours d'un atelier organisé par le PNLP et ses partenaires techniques et financiers afin de dégager un consensus national. La proportion des cas de paludisme rapportés comme grave en RDC est resté autour d'une médiane de 7% avec un domaine de variation de 6 à 9%. Hormis la proportion rapportée au Kenya (2%), les pays africains ont rapporté une proportion de cas grave variant entre 5 et 7%. Il apparaît que la proportion de 1% précédemment utilisée pour la quantification en RDC a été sous-estimée dans le contexte de la gestion des cas graves sur terrain. Un consensus s'est dégagé autour de la proportion de 5% étant entendu que des efforts de renforcement des capacités seraient déployés afin d'améliorer le diagnostic au niveau des points de prestation des services. PMID:26213595

Soins primaires aux adultes ayant des déficiences intellectuelles et développementales

PubMed Central

Sullivan, William F.; Diepstra, Heidi; Heng, John; Ally, Shara; Bradley, Elspeth; Casson, Ian; Hennen, Brian; Kelly, Maureen; Korossy, Marika; McNeil, Karen; Abells, Dara; Amaria, Khush; Boyd, Kerry; Gemmill, Meg; Grier, Elizabeth; Kennie-Kaulbach, Natalie; Ketchell, Mackenzie; Ladouceur, Jessica; Lepp, Amanda; Lunsky, Yona; McMillan, Shirley; Niel, Ullanda; Sacks, Samantha; Shea, Sarah; Stringer, Katherine; Sue, Kyle; Witherbee, Sandra

2018-01-01

Résumé Objectif Mettre à jour les Lignes directrices consensuelles canadiennes 2011 en matière de soins primaires aux adultes ayant une déficience développementale. Méthodes Des médecins de famille et d’autres professionnels de la santé expérimentés dans les soins aux personnes ayant des DID ont examiné et synthétisé les récentes connaissances empiriques, d’écosystèmes, expertes et expérientielles. Un système a été conçu pour catégoriser la qualité des recommandations. Recommandations Les adultes ayant des DID sont un groupe hétérogène de patients qui présentent des affections médicales et des facteurs qui influent sur leur santé, qui diffèrent de ceux qui touchent les autres membres de la communauté de par leur nature, leurs manifestations, leur gravité ou leur complexité. Ces personnes nécessitent une approche de soins et des interventions adaptées à leurs besoins. Les présentes lignes directrices offrent des conseils en matière de normes de soins. Nous avons incorporé des références à des outils cliniques et à d’autres ressources pratiques. Les approches de soins décrites ici s’appliquent aussi à d’autres groupes de patients ayant un déficit cognitif ou de la communication, ou d’autres déficits des fonctions adaptatives. Conclusion À titre de fournisseurs de soins de première ligne, les médecins de famille jouent un rôle vital de promotion de la santé et de bien-être auprès des adultes ayant des DID. Ces lignes directrices peuvent les aider à prendre des décisions avec les patients et les aidants naturels. PMID:29650617

Hydrodynamic Coating of a Fiber

NASA Astrophysics Data System (ADS)

Quéré, D.; de Ryck, A.

We discuss how a solid (especially a fiber) is coated when drawn out of a bath of liquid. 1. For slow withdrawals out of pure viscous liquids, the data are found to be fitted by the famous Landau law: then, the coating results from a balance between viscosity and capillarity. For quicker withdrawals, the thickness of the entrained film suddenly diverges, at a velocity on order 1 m/s. Inertia is shown to be responsible for this effect. At still higher velocities, the thickness decreases with the velocity because the solid can only entrain the viscous boundary layer. 2. For complex fluids, surface effects are found in the low velocity regime: out of a surfactant solution, films are thicker than predicted by Landau, by a factor of order 2. The thickening factor is shown to be fixed by the Marangoni flow due to the presence of surfactants; out of an emulsion, the film can be enriched with oil , which can be understood by a simple model of capture; out of a polymer solution, a strong swelling of the film is observed if normal stresses are present. Hence, the problem has two families of solution: (i) at low velocity, the thickness of the layer is fixed by a balance between viscous and surface forces and thus is sensitive to the presence of surfactants, or other heterogeneities; (ii) at high velocity, inertia must be considered and the film thickness is fixed by the bulk properties of the liquid (density and viscosity). In these regimes, it is not affected by the presence of surfactants in the bath. Nous décrivons le dépôt de liquide sur un solide (le plus souvent une fibre) qui advient quand on tire ce solide d'un bain. 1. Si le retrait se fait lentement hors d'un liquide pur et visqueux, les données expérimentales suivent la loi de Landau : le dépôt résulte d'un compromis entre forces visqueuses et forces capillaires. Pour des retraits plus rapides, on observe que l'épaisseur du dépôt diverge, pour une vitesse de l'ordre du mètre par seconde. Nous montrons comment l'inertie du fluide engendre un tel effet. Plus vite encore, l'épaisseur décroît lentement avec la vitesse, le solide ne parvenant à entraîner avec lui que la couche limite visqueuse qu'il a mis en mouvement. 2. Pour des liquides complexes, des effets de surface sont observés dans le régime basse vitesse : hors d'une solution de tensioactifs, les films sont plus épais que ce que prévoit la loi de Landau, d'un facteur 2 environ. Nous montrons que l'épaississement est déterminé par l'écoulement Marangoni dû à la présence des tensioactifs ; hors d'une émulsion, le film peut être enrichi en huile, ce que l'on peut interpréter à l'aide d'un modèle de capture ; hors d'une solution de polymère, on observe un fort gonflement du film dès que la solution est semi-diluée, à cause de l'effet des contraintes normales (effet Weissenberg). Le problème étudié a donc deux familles de solution : (i) à basse vitesse, le dépôt résulte d'un compromis entre viscosité et capillarité, si bien qu'il est sensible à la présence dans le bain d'hétérogénéités (tensioactifs, gouttes d'huile) ; (ii) à plus grande vitesse, l'inertie doit être prise en compte et l'épaisseur du film est alors liée aux propriétés de volume du liquide (densité et viscosité).

Effets de l'humidite sur la propagation du delaminage dans un composite carbone/epoxy sollicite en mode mixte I/II

NASA Astrophysics Data System (ADS)

LeBlanc, Luc R.

Les materiaux composites sont de plus en plus utilises dans des domaines tels que l'aerospatiale, les voitures a hautes performances et les equipements sportifs, pour en nommer quelques-uns. Des etudes ont demontre qu'une exposition a l'humidite nuit a la resistance des composites en favorisant l'initiation et la propagation du delaminage. De ces etudes, tres peu traitent de l'effet de l'humidite sur l'initiation du delaminage en mode mixte I/II et aucune ne traite des effets de l'humidite sur le taux de propagation du delaminage en mode mixte I/II dans un composite. La premiere partie de cette these consiste a determiner les effets de l'humidite sur la propagation du delaminage lors d'une sollicitation en mode mixte I/II. Des eprouvettes d'un composite unidirectionnel de carbone/epoxy (G40-800/5276-1) ont ete immergees dans un bain d'eau distillee a 70°C jusqu'a leur saturation. Des essais experimentaux quasi-statiques avec des chargements d'une gamme de mixites des modes I/II (0%, 25%, 50%, 75% et 100%) ont ete executes pour determiner les effets de l'humidite sur la resistance au delaminage du composite. Des essais de fatigue ont ete realises, avec la meme gamme de mixite des modes I/II, pour determiner 1'effet de 1'humidite sur l'initiation et sur le taux de propagation du delaminage. Les resultats des essais en chargement quasi-statique ont demontre que l'humidite reduit la resistance au delaminage d'un composite carbone/epoxy pour toute la gamme des mixites des modes I/II, sauf pour le mode I ou la resistance au delaminage augmente apres une exposition a l'humidite. Pour les chargements en fatigue, l'humidite a pour effet d'accelerer l'initiation du delaminage et d'augmenter le taux de propagation pour toutes les mixites des modes I/II. Les donnees experimentales recueillies ont ete utilisees pour determiner lesquels des criteres de delaminage en statique et des modeles de taux de propagation du delaminage en fatigue en mode mixte I/II proposes dans la litterature representent le mieux le delaminage du composite etudie. Une courbe de regression a ete utilisee pour determiner le meilleur ajustement entre les donnees experimentales et les criteres de delaminage en statique etudies. Une surface de regression a ete utilisee pour determiner le meilleur ajustement entre les donnees experimentales et les modeles de taux de propagation en fatigue etudies. D'apres les ajustements, le meilleur critere de delaminage en statique est le critere B-K et le meilleur modele de propagation en fatigue est le modele de Kenane-Benzeggagh. Afin de predire le delaminage lors de la conception de pieces complexes, des modeles numeriques peuvent etre utilises. La prediction de la longueur de delaminage lors des chargements en fatigue d'une piece est tres importante pour assurer qu'une fissure interlaminaire ne va pas croitre excessivement et causer la rupture de cette piece avant la fin de sa duree de vie de conception. Selon la tendance recente, ces modeles sont souvent bases sur l'approche de zone cohesive avec une formulation par elements finis. Au cours des travaux presentes dans cette these, le modele de progression du delaminage en fatigue de Landry & LaPlante (2012) a ete ameliore en y ajoutant le traitement des chargements en mode mixte I/II et en y modifiant l'algorithme du calcul de la force d'entrainement maximale du delaminage. Une calibration des parametres de zone cohesive a ete faite a partir des essais quasi-statiques experimentaux en mode I et II. Des resultats de simulations numeriques des essais quasi-statiques en mode mixte I/II, avec des eprouvettes seches et humides, ont ete compares avec les essais experimentaux. Des simulations numeriques en fatigue ont aussi ete faites et comparees avec les resultats experimentaux du taux de propagation du delaminage. Les resultats numeriques des essais quasi-statiques et de fatigue ont montre une bonne correlation avec les resultats experimentaux pour toute la gamme des mixites des modes I/II etudiee.

The performance of blended conventional and novel binders in the in-situ stabilisation/solidification of a contaminated site soil.

PubMed

Wang, Fei; Wang, Hailing; Jin, Fei; Al-Tabbaa, Abir

2015-03-21

This paper presents an investigation of the effects of novel binders and pH values on the effectiveness of the in-situ stabilisation/solidification technique in treating heavy metals and organic contaminated soils after 1.5-year treatment. To evaluate the performance of different binders, made ground soils of SMiRT site, upto 5 m depth, were stabilised/solidified with the triple auger system and cores were taken for laboratory testing after treatment. Twenty four different binders were used including Portland cement (PC), ground granulated blastfurnace slag (GGBS), pulverised fuel ash (PFA), MgO and zeolite. Unconfined compressive strength (UCS), leachate pH and the leachability of heavy metals and total organics were applied to study the behaviours of binders in treating site soils. Under various contaminant level and binder level, the results show that UCS values were 22-3476 kPa, the leachability of the total organics was in the range of 22-241 mg/l and the heavy metals was in the range of 0.002-0.225 mg/l. In addition, the combination of GGBS and MgO at a ratio of 9:1 shows better immobilisation efficiency in treating heavy metals and organic contaminated soils after 1.5-year treatment, and the binding mechanisms under different binders were also discussed in this paper. Copyright © 2014 Elsevier B.V. All rights reserved.

Effect of kinesiotaping, non-elastic taping and bracing on segmental foot kinematics during drop landing in healthy subjects and subjects with chronic ankle instability.

PubMed

Kuni, B; Mussler, J; Kalkum, E; Schmitt, H; Wolf, S I

2016-09-01

To evaluate the effects of kinesiotape, non-elastic tape, and soft brace on segmental foot kinematics during drop landing in subjects with chronic ankle instability and healthy subjects. Controlled study with repeated measurements. Three-dimensional motion analysis laboratory. Twenty participants with chronic ankle instability and 20 healthy subjects. The subjects performed drop landings with 17 retroreflective markers on the foot and lower leg in four conditions: barefoot, with kinesiotape, with non-elastic tape and with a soft brace. Ranges of motion of foot segments using a foot measurement method. In participants with chronic ankle instability, midfoot movement in the frontal plane (inclination of the medial arch) was reduced significantly by non-elastic taping, but kinesiotaping and bracing had no effect. In healthy subjects, both non-elastic taping and bracing reduced that movement. In both groups, non-elastic taping and bracing reduced rearfoot excursion in inversion/eversion significantly, which indicates a stabilisation effect. No such effect was found with kinesiotaping. All three methods reduced maximum plantar flexion significantly. Non-elastic taping stabilised the midfoot best in patients with chronic ankle instability, while kinesiotaping did not influence foot kinematics other than to stabilise the rearfoot in the sagittal plane. ClinicalTrials.gov NCT01810471. Copyright © 2015 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

A Scott bench with ergonomic thorax stabilisation pad improves body posture during preacher arm curl exercise.

PubMed

Biscarini, Andrea; Benvenuti, Paolo; Busti, Daniele; Zanuso, Silvano

2016-05-01

We assessed whether the use of an ergonomic thorax stabilisation pad, during the preacher arm curl exercise, could significantly reduce the excessive shoulder protraction and thoracic kyphosis induced by the standard flat pad built into the existing preacher arm curl equipment. A 3D motion capture system and inclinometers were used to measure shoulder protraction and thoracic kyphosis in 15 subjects performing preacher arm curl with a plate-loaded machine provided with the standard flat pad. The same measures were repeated after replacing the flat pad with a new ergonomic pad, specifically designed to accommodate the thorax profile and improve body posture. Pad replacement significantly (p < 0.001) reduced shoulder protraction (from [Formula: see text] to [Formula: see text]) and thoracic kyphosis (from [Formula: see text] to [Formula: see text]), enabling postural and functional improvements within the entire spine, shoulder girdle and rib cage. The ergonomic pad may potentially allow a more effective training, prevent musculoskeletal discomfort and reduce the risk of injury. Practitioner summary: We have designed an ergonomic thorax stabilisation pad for the preacher arm curl exercise. The new ergonomic pad improves the poor posture conditions induced by the standard flat pad and may potentially allow a more effective training, prevent musculoskeletal discomfort, improve the breathing function and reduce the risk of injury.

Settlement analysis of fresh and partially stabilised municipal solid waste in simulated controlled dumps and bioreactor landfills.

PubMed

Swati, M; Joseph, Kurian

2008-01-01

The patterns of settlement of fresh as well as partially stabilised municipal solid waste (MSW), undergoing degradation in five different landfill lysimeters, were studied elaborately. The first two lysimeters, R1 and R2, contained fresh MSW while the other three lysimeters, R3, R4 and R5, contained partially stabilised MSW. R1 and R3 simulated conventional controlled dumps with fortnightly disposal of drained leachate. R2 and R4 simulated bioreactor landfills with leachate recirculation. Fortnightly water flushing was done in R5. Settlement of MSW, monitored over a period of 58 weeks, was correlated with the organic carbon content of leachate and residual volatile matter in the MSW to establish the relationship between settlement and organic destruction. Compressibility parameters such as modulus of elasticity and compression indices were determined and empirical equations were applied for the settlement data. Overall settlements up to 49% were observed in the case of landfill lysimeters, filled with fresh MSW. Landfill lysimeters with liquid addition, in the form of leachate or water, experienced lower primary settlements and higher secondary settlements than conventional fills, where no liquid addition was practised. Modified secondary compression indices for MSW in lysimeters with leachate recirculation and flushing were 30%-44% higher than that for lysimeters where no liquid addition was done. Secondary settlements in bioreactor landfills were found to vary exponentially with time.

Towards realistic string vacua from branes at singularities

NASA Astrophysics Data System (ADS)

Conlon, Joseph P.; Maharana, Anshuman; Quevedo, Fernando

2009-05-01

We report on progress towards constructing string models incorporating both realistic D-brane matter content and moduli stabilisation with dynamical low-scale supersymmetry breaking. The general framework is that of local D-brane models embedded into the LARGE volume approach to moduli stabilisation. We review quiver theories on del Pezzo n (dPn) singularities including both D3 and D7 branes. We provide supersymmetric examples with three quark/lepton families and the gauge symmetries of the Standard, Left-Right Symmetric, Pati-Salam and Trinification models, without unwanted chiral exotics. We describe how the singularity structure leads to family symmetries governing the Yukawa couplings which may give mass hierarchies among the different generations. We outline how these models can be embedded into compact Calabi-Yau compactifications with LARGE volume moduli stabilisation, and state the minimal conditions for this to be possible. We study the general structure of soft supersymmetry breaking. At the singularity all leading order contributions to the soft terms (both gravity- and anomaly-mediation) vanish. We enumerate subleading contributions and estimate their magnitude. We also describe model-independent physical implications of this scenario. These include the masses of anomalous and non-anomalous U(1)'s and the generic existence of a new hyperweak force under which leptons and/or quarks could be charged. We propose that such a gauge boson could be responsible for the ghost muon anomaly recently found at the Tevatron's CDF detector.

Compact atomic clocks and stabilised laser for space applications

NASA Astrophysics Data System (ADS)

Mileti, Gaetano; Affolderbach, Christoph; Matthey-de-l'Endroit, Renaud

2016-07-01

We present our developments towards next generation compact vapour-cell based atomic frequency standards using a tunable laser diode instead of a traditional discharge lamp. The realisation of two types of Rubidium clocks addressing specific applications is in progress: high performance frequency standards for demanding applications such as satellite navigation, and chip-scale atomic clocks, allowing further miniaturisation of the system. The stabilised laser source constitutes the main technological novelty of these new standards, allowing a more efficient preparation and interrogation of the atoms and hence an improvement of the clock performances. However, before this key component may be employed in a commercial and ultimately in a space-qualified instrument, further studies are necessary to demonstrate their suitability, in particular concerning their reliability and long-term operation. The talk will present our preliminary investigations on this subject. The stabilised laser diode technology developed for our atomic clocks has several other applications on ground and in space. We will conclude our talk by illustrating this for the example of a recently completed ESA project on a 1.6 microns wavelength reference for a future space-borne Lidar. This source is based on a Rubidium vapour cell providing the necessary stability and accuracy, while a second harmonic generator and a compact optical comb generated from an electro-optic modulator allow to transfer these properties from the Rubidium wavelength (780nm) to the desired spectral range.

Role of the tail in the regulated state of myosin 2

PubMed Central

Jung, HyunSuk; Billington, Neil; Thirumurugan, Kavitha; Salzameda, Bridget; Cremo, Christine R.; Chalovich, Joseph M.; Chantler, Peter D.; Knight, Peter J.

2013-01-01

Myosin 2 from vertebrate smooth muscle or non-muscle sources is in equilibrium between compact, inactive monomers and thick filaments under physiological conditions. In the inactive monomer, the two heads pack compactly together and the long tail is folded into three closely-packed segments that are associated chiefly with one of the heads. The molecular basis of the folding of the tail remains unexplained. Using electron microscopy, we show that compact monomers of smooth muscle myosin 2 have the same structure in both the native state and following specific, intramolecular photo-cross-linking between Cys109 of the regulatory light chain (RLC) and segment 3 of the tail. Non-specific cross-linking between lysine residues of the folded monomer by glutaraldehyde also does not perturb the compact conformation, and stabilises it against unfolding at high ionic strength. Sequence comparisons across phyla and myosin 2 isoforms suggest that folding of the tail is stabilised by ionic interactions between the positively-charged N-terminal sequence of the RLC and a negatively-charged region near the start of tail segment 3, and that phosphorylation of the RLC could perturb these interactions. Our results support the view that interactions between the heads and the distal tail perform a critical role in regulating activity of myosin 2 molecules through stabilising the compact monomer conformation. PMID:21419133

Hirayama disease: Is surgery an option?

PubMed

Agundez, M; Rouco, I; Barcena, J; Mateos, B; Barredo, J; Zarranz, J J

2015-10-01

Hirayama disease is a rare cervical myelopathy, predominantly affecting young males, which presents with distal atrophy of the upper limbs as its first and main symptom. It must be differentiated from motor neuron diseases because its natural history is different and because HD tends to stabilise in less than 5 years. Diagnosis is based on clinical findings and dynamic flexion MRI showing segmental spinal muscular atrophy, detachment of the posterior dura mater and venous congestion in the epidural space. The tendency is to indicate conservative treatment and no indications for surgery have been established. We present 4 cases meeting both clinical criteria and dynamic MRI imaging criteria for a diagnosis of Hirayama disease. Two have stabilised spontaneously over the course of many years, and MRI scans show that typical changes have disappeared. Another case also remains stable following a shorter observation time. The fourth case is a young man who developed severe myelopathy in just over a year, and therefore underwent surgery. While his follow-up time is still short, his condition remains stable. Our 4 cases suggest that the condition of most patients with Hirayama stabilises naturally; patients should be evaluated for surgery on an individual basis, and surgery should probably be limited to the most severe cases that have progressed quickly. Copyright © 2013 Sociedad Española de Neurología. Published by Elsevier España, S.L.U. All rights reserved.

Gestion des ressources hydriques adaptee aux changements climatiques pour la production optimale d'hydroelectricite. Etude de cas: Bassin versant de la riviere Manicouagan

NASA Astrophysics Data System (ADS)

Haguma, Didier

Il est dorenavant etabli que les changements climatiques auront des repercussions sur les ressources en eau. La situation est preoccupante pour le secteur de production d'energie hydroelectrique, car l'eau constitue le moteur pour generer cette forme d'energie. Il sera important d'adapter les regles de gestion et/ou les installations des systemes hydriques, afin de minimiser les impacts negatifs et/ou pour capitaliser sur les retombees positives que les changements climatiques pourront apporter. Les travaux de la presente recherche s'interessent au developpement d'une methode de gestion des systemes hydriques qui tient compte des projections climatiques pour mieux anticiper les impacts de l'evolution du climat sur la production d'hydroelectricite et d'etablir des strategies d'adaptation aux changements climatiques. Le domaine d'etude est le bassin versant de la riviere Manicouagan situe dans la partie centrale du Quebec. Une nouvelle approche d'optimisation des ressources hydriques dans le contexte des changements climatiques est proposee. L'approche traite le probleme de la saisonnalite et de la non-stationnarite du climat d'une maniere explicite pour representer l'incertitude rattachee a un ensemble des projections climatiques. Cette approche permet d'integrer les projections climatiques dans le probleme d'optimisation des ressources en eau pour une gestion a long terme des systemes hydriques et de developper des strategies d'adaptation de ces systemes aux changements climatiques. Les resultats montrent que les impacts des changements climatiques sur le regime hydrologique du bassin de la riviere Manicouagan seraient le devancement et l'attenuation de la crue printaniere et l'augmentation du volume annuel d'apports. L'adaptation des regles de gestion du systeme hydrique engendrerait une hausse de la production hydroelectrique. Neanmoins, une perte de la performance des installations existantes du systeme hydrique serait observee a cause de l'augmentation des deversements non productibles dans le climat futur. Des strategies d'adaptation structurale ont ete analysees pour augmenter la capacite de production et la capacite d'ecoulement de certaines centrales hydroelectriques afin d'ameliorer la performance du systeme. Une analyse economique a permis de choisir les meilleures mesures d'adaptation et de determiner le moment opportun pour la mise en oeuvre de ces mesures. Les resultats de la recherche offrent aux gestionnaires des systemes hydriques un outil qui permet de mieux anticiper les consequences des changements climatiques sur la production hydroelectrique, incluant le rendement de centrales, les deversements non productibles et le moment le plus opportun pour inclure des modifications aux systemes hydriques. Mots-cles : systemes hydriques, adaptation aux changements climatiques, riviere Manicouagan

Inhibition of DES-induced DNA adducts by diallyl sulfide: implications in liver cancer prevention.

PubMed

Green, Mario; Thomas, Ronald; Gued, Lisa; Sadrud-Din, Sakeenah

2003-01-01

Diethylstilbesterol (DES) is known to cause cancer in humans and animals. Diallyl sulfide (DAS), a component of garlic, has been shown to prevent various types of cancer, presumably via metabolic modulation. Previously, we have demonstrated that DAS prevents the oxidation and reduction of DES in vitro. We hypothesize that DAS will inhibit the metabolism of DES in vivo thus preventing the formation of DES-induced DNA adducts. To test this hypothesis, five groups of five male Sprague-Dawley rats were treated as follows: the control received 0.5 ml of corn oil daily for four days. The second group received 50 mg/kg DAS daily for four days. The third group received 50 mg/kg DAS daily for four days followed by 150 mg/kg DES on day five. The fourth group received 400 mg/kg DAS on day five followed by 150 mg/kg DES. The fifth group received 150 mg/kg DES on day five. All of the rats were sacrificed on day five, 4 h after DES treatment. DNA was isolated from the liver and analyzed by 32P-post-labeling for DNA adducts. The in vitro study was performed utilizing four reactions described as follows: the control reaction contained 200 microg DNA, microsomes (346 microg protein/ml), and 10 mM DES; no oxidation co-factor (cumen hydroperoxide) was added. The second reaction, a complete oxidation system, contained 200 microg DNA, microsomes (346 microg protein/ml), 30 mM cumen hydroperoxide, and 10 mM DES. The third reaction contained 200 microg DNA, microsomes (346 microg protein/ml), 30 mM cumen hydroperoxide, 50 mM DAS, and 10 mM DES. The fourth reaction contained 200 microg DNA, microsomes (346 microg protein/ml), 30 mM cumen hydroperoxide, 100 mM DAS, and 10 mM DES. All of the in vitro reactions were buffered with 100 mM KPO4 pH 7.4 and incubated for 30 min at 37 degrees C. DNA was extracted and analyzed by 32P-post-labeling. We found that DAS inhibited the formation of DES-induced DNA adducts in a dose-dependent fashion. We have shown that DES-induced DNA adducts were inhibited in rats that received DAS pre-treatment and co-treatment with DES. These results suggest that DAS directly inhibits the metabolism of DES thus preventing the formation of DNA adducts. In addition to directly inhibiting the metabolism of DES, DAS appears to alter the expression of the metabolic machinery such that DES-induced adducts are inhibited. The inhibition of DES-induced DNA adducts by DAS may prevent the initiation of estrogen-induced cancer.

Mouse hypospadias: A critical examination and definition

PubMed Central

Sinclair, Adriane Watkins; Cao, Mei; Shen, Joel; Cooke, Paul; Risbridger, Gail; Baskin, Laurence; Cunha, Gerald R.

2016-01-01

Hypospadias is a common malformation whose etiology is based upon perturbation of normal penile development. The mouse has been previously used as a model of hypospadias, despite an unacceptably wide range of definitions for this malformation. The current paper presents objective criteria and a definition of mouse hypospadias. Accordingly, diethylstilbestrol (DES) induced penile malformations were examined at 60 days postnatal (P60) in mice treated with DES over the age range of 12 days embryonic to 20 days postnatal (E12 to P20). DES-induced hypospadias involves malformation of the urethral meatus, which is most severe in DES E12-P10, DES P0-P10 and DES P5-P15 groups and less so or absent in the other treatment groups. A frenulum-like ventral tether between the penis and the prepuce was seen in the most severely affected DES-treated mice. Internal penile morphology was also altered in the DES E12-P10, DES P0-P10 and DES P5-P15 groups (with little effect in the other DES treatment groups). Thus, adverse effects of DES are a function of the period of DES treatment and most severe in the P0 to P10 period. In “estrogen mutant mice” (NERKI, βERKO, αERKO and AROM+) hypospadias was only seen in AROM+ male mice having genetically-engineered elevation is serum estrogen. Significantly, mouse hypospadias was only seen distally at and near the urethral meatus where epithelial fusion events are known to take place and never in the penile midshaft, where urethral formation occurs via an entirely different morphogenetic process. PMID:27068029

Caracterisation des proprietes dielectriques de materiaux composites a base de polyethylene terephtalate recycle =

NASA Astrophysics Data System (ADS)

Mebarki, Fouzia

Cette etude vise a etudier la possibilite d'utiliser des materiaux composites a matrice thermoplastique pour des applications electriques comme les supports des systemes d'allumage dans les moteurs d'automobile. Nous nous interessons plus particulierement aux composites a base de polyethylene terephtalate (PET) recycle. Les isolants classiques comme le PET ne peuvent pas satisfaire toutes les exigences. L'introduction des renforts comme les fibres de verre et le mica peuvent ameliorer les caracteristiques mecaniques de ces materiaux. Toutefois, cette amelioration peut etre accompagnee d'une diminution des proprietes electriques surtout que ces materiaux doivent operer sous contraintes thermiques et electriques tres severes. Afin d'estimer la duree de vie de ces isolants, des essais de vieillissement accelere ont ete effectues a une frequence de 300Hz dans une plage de temperature allant de la temperature ambiante a 140°C. L'etude a haute temperature permettra de determiner la temperature de service des materiaux candidats. Des essais de la rupture dielectrique ont ete realises sur un grand nombre d'echantillon selon la norme ASTM D-149 relative aux mesures de rigidite dielectrique des isolants solides. Ces tests ont permis de deceler les echantillons problematiques et de verifier la qualite de ces isolants solides. Les differentes connaissances acquises lors de cette analyse ont servi a predire les performances des materiaux en service et vont permettre a la compagnie Groupe Lavergne d'apporter des ameliorations au niveau des formulations existantes et par la suite developper un materiau ayant les proprietes electriques et thermiques adequates pour ce type d'application. None None None None

[Not Available].

PubMed

Belmir, R; Fejjal, N; El Omari, M; El Mazouz, S; Gharib, N; Abassi, A; Belmahi, A

2008-09-30

Les accidents électriques par haute tension (AEHT) provoquent des brûlures profondes par effet Joule le long des axes vasculo-nerveux entre les points d'entrée et de sortie, qui sont le siège de lésions délabrantes. Les Auteurs rapportent une série de dix cas d'AEHT admis au service de chirurgie réparatrice et de brûlés de l'Hôpital Ibn Sina de Rabat à travers laquelle ils étudient les caractéristiques épidémiologiques, cliniques et thérapeutiques. Tous les patients étaient des adultes de sexe masculin dont l'âge moyen était de 31 ans. Dans 70% des cas, ces brûlures étaient secondaires à un contact avec les distributeurs d'électricité avec une surface brûlée inférieure à 20%. Le traitement des lésions électrothermiques a nécessité des interventions itératives avec amputation des segments de membres nécrosés dans 70% des cas, dont les suites étaient marquées par des séquelles fonctionnelles invalidantes. La prévention des AEHT, en particulier pour les accidents du travail au sein des professions exposées, reste fondamentale.

Diethylstilbestrol (DES) and Cancer

MedlinePlus

... Genetics Services Directory Cancer Prevention Overview Research Diethylstilbestrol (DES) and Cancer On This Page What is DES? ... outlined in the table below. Fertility Problems in DES Daughters ( 7 ) Fertility Complication Hazard Ratio Percent Cumulative ...

Des recommandations probantes pour surveiller l’innocuité des antipsychotiques de deuxième génération chez les enfants et les adolescents

PubMed Central

Pringsheim, Tamara; Panagiotopoulos, Constadina; Davidson, Jana; Ho, Josephine

2012-01-01

HISTORIQUE : Au Canada, l’utilisation d’antipsychotiques, notamment les antipsychotiques de deuxième génération (ADG), a augmenté de façon considérable depuis cinq ans chez les enfants ayant des troubles de santé mentale. Ces médicaments ont le potentiel de causer de graves complications métaboliques et neurologiques lorsqu’on les utilise de manière chronique. OBJECTIF : Synthétiser les données probantes relatives aux effets secondaires métaboliques et neurologiques précis associés à l’usage d’ADG chez les enfants et fournir des recommandations probantes sur la surveillance de ces effets secondaires. MÉTHODOLOGIE : Les auteurs ont procédé à une analyse systématique des essais cliniques contrôlés des ADG auprès d’enfants. Ils ont fait des recommandations à l’égard de la surveillance de l’innocuité des ADG d’après un modèle de classification fondé sur le système GRADE (système de notation de l’évaluation et de l’élaboration des recommandations). Lorsque les données probantes n’étaient pas suffisantes, ils fondaient leurs recommandations sur le consensus et l’avis d’experts. Un groupe consensuel multidisciplinaire a analysé toutes les données probantes pertinentes et est parvenu à un consensus à l’égard des recommandations. RÉSULTATS : Les recommandations probantes portant sur la surveillance de l’innocuité des ADG figurent dans les présentes lignes directrices. Les auteurs indiquent la qualité des recommandations relatives à des examens physiques et tests de laboratoire précis à l’égard de chaque ADG à des moments déterminés. CONCLUSION : De multiples essais aléatoires et contrôlés ont permis d’évaluer l’efficacité de bon nombre des ADG utilisés pour traiter les troubles de santé mentale en pédiatrie. Toutefois, leurs avantages ne sont pas sans risques : on observe à la fois des effets secondaires métaboliques et neurologiques chez les enfants traités au moyen d’ADG. Le risque de prise de poids, d’augmentation de l’indice de masse corporelle et de taux lipidiques anormaux est plus élevé à l’utilisation d’olanzapine, suivie de la clozapine et de la quétiapine. Quant au risque d’effets secondaires neurologiques des traitements, il est plus élevé à l’utilisation de rispéridone, d’olanzapine et d’aripiprazole. Des interventions de surveillance pertinentes des effets secondaires amélioreront la qualité des soins des enfants traités à l’aide de ces médicaments. PMID:24082813

Etude aerodynamique d'un jet turbulent impactant une paroi concave

NASA Astrophysics Data System (ADS)

LeBlanc, Benoit

Etant donne la demande croissante de temperatures elevees dans des chambres de combustion de systemes de propulsions en aerospatiale (turbomoteurs, moteur a reaction, etc.), l'interet dans le refroidissement par jets impactant s'est vu croitre. Le refroidissement des aubes de turbine permet une augmentation de temperature de combustion, ce qui se traduit en une augmentation de l'efficacite de combustion et donc une meilleure economie de carburant. Le transfert de chaleur dans les au bages est influence par les aspects aerodynamiques du refroidissement a jet, particulierement dans le cas d'ecoulements turbulents. Un manque de comprehension de l'aerodynamique a l'interieur de ces espaces confinees peut mener a des changements de transfert thermique qui sont inattendus, ce qui augmente le risque de fluage. Il est donc d'interet pour l'industrie aerospatiale et l'academie de poursuivre la recherche dans l'aerodynamique des jets turbulents impactant les parois courbes. Les jets impactant les surfaces courbes ont deja fait l'objet de nombreuses etudes. Par contre des conditions oscillatoires observees en laboratoire se sont averees difficiles a reproduire en numerique, puisque les structures d'ecoulements impactants des parois concaves sont fortement dependantes de la turbulence et des effets instationnaires. Une etude experimentale fut realisee a l'institut PPRIME a l'Universite de Poitiers afin d'observer le phenomene d'oscillation dans le jet. Une serie d'essais ont verifie les conditions d'ecoulement laminaires et turbulentes, toutefois le cout des essais experimentaux a seulement permis d'avoir un apercu du phenomene global. Une deuxieme serie d'essais fut realisee numeriquement a l'Universite de Moncton avec l'outil OpenFOAM pour des conditions d'ecoulement laminaire et bidimensionnel. Cette etude a donc comme but de poursuivre l'enquete de l'aerodynamique oscillatoire des jets impactant des parois courbes, mais pour un regime d'ecoulement transitoire, turbulent, tridimensionnel. Les nombres de Reynolds utilises dans l'etude numerique, bases sur le diametre du jet lineaire observe, sont de Red = 3333 et 6667, consideres comme etant en transition vers la turbulence. Dans cette etude, un montage numerique est construit. Le maillage, le schema numerique, les conditions frontiere et la discretisation sont discutes et choisis. Les resultats sont ensuite valides avec des donnees turbulentes experimentales. En modelisation numerique de turbulence, les modeles de Moyennage Reynolds des Equations Naviers Stokes (RANS) presentent des difficultes avec des ecoulements instationnaires en regime transitionnel. La Simulation des Grandes Echelles (LES) presente une solution plus precise, mais au cout encore hors de portee pour cette etude. La methode employee pour cette etude est la Simulation des Tourbillons Detaches (DES), qui est un hybride des deux methodes (RANS et LES). Pour analyser la topologie de l'ecoulement, la decomposition des modes propres (POD) a ete egalement ete effectuee sur les resultats numeriques. L'etude a demontre d'abord le temps de calcul relativement eleve associe a des essais DES pour garder le nombre de Courant faible. Les resultats numeriques ont cependant reussi a reproduire correctement le basculement asynchrone observe dans les essais experimentaux. Le basculement observe semble etre cause par des effets transitionnels, ce qui expliquerait la difficulte des modeles RANS a correctement reproduire l'aerodynamique de l'ecoulement. L'ecoulement du jet, a son tour, est pour la plupart du temps tridimensionnel et turbulent sauf pour de courtes periodes de temps stable et independant de la troisieme dimension. L'etude topologique de l'ecoulement a egalement permit la reconaissances de structures principales sousjacentes qui etaient brouillees par la turbulence. Mots cles : jet impactant, paroi concave, turbulence, transitionnel, simulation des tourbillons detaches (DES), OpenFOAM.

Relations de Dispersion et Diffusion des Glueballs et des Mesons dans la Theorie de Jauge U(1)(2+1) Compacte

NASA Astrophysics Data System (ADS)

Ahmed, Chaara El Mouez

Nous avons etudie les relations de dispersion et la diffusion des glueballs et des mesons dans le modele U(1)_{2+1} compact. Ce modele a ete souvent utilise comme un simple modele de la chromodynamique quantique (QCD), parce qu'il possede le confinement ainsi que les etats de glueballs. Par contre, sa structure mathematique est beaucoup plus simple que la QCD. Notre methode consiste a diagonaliser l'Hamiltonien de ce modele dans une base appropriee de graphes et sur reseau impulsion, afin de generer les relations de dispersion des glueballs et des mesons. Pour la diffusion, nous avons utilise la methode dependante du temps pour calculer la matrice S et la section efficace de diffusion des glueballs et des mesons. Les divers resultats obtenus semblent etre en accord avec les travaux anterieurs de Hakim, Alessandrini et al., Irving et al., qui eux, utilisent plutot la theorie des perturbations en couplage fort, et travaillent sur un reseau espace-temps.

[Isolation, identification and characterization of a diethylstilbestrol-degrading bacterial strain Serratia sp].

PubMed

Xu, Ran-Fang; Sun, Min-Xia; Liu, Juan; Wang, Hong; Li, Xin; Zhu, Xue-Zhu; Ling, Wan-Ting

2014-08-01

Utilizing the diethylstilbestrol (DES)-degrading bacteria to biodegrade DES is a most reliable technique for cleanup of DES pollutants from the environment. However, little information is available heretofore on the isolation of DES-degrading bacteria and their DES removal performance in the environment. A novel bacterium capable of degrading DES was isolated from the activated sludge of a wastewater treatment plant. According to its morphology, physiochemical characteristics, and 16S rDNA sequence analysis, this strain was identified as Serratia sp.. The strain was an aerobic bacterium, and it could degrade 68.3% of DES (50 mg x L(-1)) after culturing for 7 days at 30 degrees C, 150 r x min(-1) in shaking flasks. The optimal conditions for DES biodegradation by the obtained strain were 30 degrees C, 40-60 mg x L(-1) DES, pH 7.0, 5% of inoculation volume, 0 g x L(-1) of added NaCl, and 10 mL of liquid medium volume in 100 mL flask.

Les bons conseils de la naissance à la maternelle

PubMed Central

Rourke, Leslie; Leduc, Denis; Constantin, Evelyn; Carsley, Sarah; Rourke, James; Li, Patricia

2013-01-01

Résumé Objectif Donner un aperçu de la version 2011 du Relevé postnatal Rourke (RPR), qui comporte aussi des nouveautés dans son site web et de nouvelles initiatives connexes et qui intègre les données des ouvrages scientifiques récents sur les soins de santé préventifs à l’intention des enfants de 0 à 5 ans. Qualité des données À l’instar des versions antérieures du RPR, la nouvelle édition présente des recommandations identifiées comme se fondant sur des preuves suffisantes, acceptables ou consensuelles, selon les classifications adoptées par le Groupe d’étude canadien sur les soins de santé préventifs en 2011. Message principal De nouveaux renseignements et des recommandations sont présentés concernant la surveillance de la croissance, la nutrition et la vaccination contre la varicelle, les pneumocoques, les méningocoques et le rotavirus. Il y a maintenant de bonnes données probantes en faveur de l’adaptation canadienne des courbes de croissance de l’Organisation mondiale de la Santé, du dépistage universel des problèmes d’audition chez le nouveau-né et du recours à des stratégies de réduction de la douleur liée à la vaccination. On a mis à jour les conseils anticipatoires concernant la sécurité durant le sommeil, la supervision de la santé des enfants en foyer d’accueil, le trouble du spectre de l’alcoolisation fœtale, les facteurs de risque nécessitant le dépistage du plomb et de l’anémie, les soins dentaires et la santé buccale. Parmi les nouvelles rubriques dans le site web du RPR, on peut mentionner une section présentant des ressources pour les parents, des modifications à l’intention de populations particulières, comme les personnes vivant au Nunavut, une version du RPR qui met en évidence en un coup d’œil les modifications à la version de 2009 et une expansion de la fonction d’exploration du RPR accompagnée des hyperliens connexes menant aux renseignements pertinents. On peut aussi avoir accès au RPR sous forme d’une page par visite. Le Collège des médecins de famille du Canada et la Société canadienne de pédiatrie ont donné leur aval au RPR de 2011. Les versions nationale et ontarienne sont disponibles en français et en anglais. Conclusion Le RPR de 2011 est un outil pratique, mis à jour, fondé sur des données probantes de transposition du savoir concernant les soins de santé préventifs aux enfants de la naissance à l’âge de 5 ans. Il propose des ressources exhaustives dans le web à l’intention des professionnels de la santé, des étudiants, des résidents et des parents.

Controle optique de qubits lies a des centres isoelectroniques d'azote dans le GaAs

NASA Astrophysics Data System (ADS)

Ethier-Majcher, Gabriel

Le traitement de l'information quantique est un domaine de recherche actuellement en pleine effervescence car il laisse entrevoir une revolution dans notre facon de traiter et d'echanger de l'information. D'une part, l'ordinateur quantique promet de resoudre des problemes comme la factorisation d'un polynome de facon beaucoup plus efficace qu'un ordinateur classique. D'autre part, les communications quantiques promettent l'echange d'information de facon fondamentalement inviolable. Afin de tirer pleinement profit de ces nouvelles technologies, il sera avantageux de construire des reseaux quantiques. Dans un tel reseau, des processeurs quantiques, les noeuds, seront connectes par des photons voyageant dans des fibres optiques. Les reseaux quantiques permettront de deployer les communications quantiques a grande echelle et de creer des super-ordinateurs quantiques. La realisation de reseaux quantiques necessitera des interfaces optiques pouvant echanger l'information de facon coherente entre un qubit (bit d'information quantique) et un photon. L'implementation de telles interfaces dans un systeme physique s'avere un important defi scientifique et technologique. Or, les systemes actuellement envisages a cette fin souffrent d'un faible couplage avec la lumiere ou encore de grandes inhomogeneites, constituant des obstacles a la realisation de reseaux a grande echelle. Dans cette these, le potentiel des centres isoelectroniques pour realiser des interfaces optiques est evalue. Deux types de qubits lies a des paires d'azote dans le GaAs sont consideres : les qubits excitoniques et les qubits de spin electronique, controlables par l'intermediaire d'excitons charges. Le controle optique complet des qubits excitoniques est demontre, ce qui constitue la premiere realisation du genre dans les centres isoelectroniques. L'observation d'excitons charges dans ce systeme, liant a la fois des trous lourds et des trous legers, laisse entrevoir de nouvelles possibilites afin de manipuler des spins electroniques. Les excitons et excitons charges lies aux paires d'azote sont etudies par la photoluminescence resolue spatialement. Le controle des qubits excitoniques est realisee a l'aide d'impulsions laser resonantes avec un etat excitonique et l'etat du qubit est lu par sa fluorescence en resonance. Une experience de rotations de Rabi est realisee pour demontrer un controle sur la population du qubit. Cette experience permet d'extraire un moment dipolaire moyen de 27 D pour l'exciton.

Dissociation in bipolar disorder: Relationships between clinical variables and childhood trauma.

PubMed

Hariri, Aytül Gursu; Gulec, Medine Yazici; Orengul, Fatma Fariha Cengiz; Sumbul, Esra Aydin; Elbay, Rumeysa Yeni; Gulec, Huseyin

2015-09-15

The dissociative experiences of patients with bipolar disorder (BD) differ from those of patients with other psychiatric disorders with regard to certain features. The primary goal of this study was to evaluate the relationship between the clinical variables of BD and childhood trauma using the factor structure, psychometric features, and potential subdimensions of the Dissociative Experience Scale (DES). This study included 200 BD patients who were in a remission period and 50 healthy volunteers. The BD patients were recruited from two psychiatry clinic departments in Turkey. The sociodemographic data of the two groups and their scores on the DES and Childhood Trauma Questionnaire (CTQ)-28 were compared. The overall DES scores and the scores for each DES item accurately and reliably measured dissociation in the BD patients (item-total correlation r scores: >0.20, Cronbach's alpha: 0.95), and a factor analysis revealed two subdimensions of the DES for BD: identity confusion/alteration (SubDES-1) and amnesia and depersonalization/derealization (SubDES-2). Although age at onset of BD was significantly correlated with both subdimensions, illness duration was significantly correlated only with the SubDES-2. Of all the subjects, 19.5% (39/200 patients) were identified as having dissociative experiences by the DES-Taxon (DES-T), and subjects in this subscale (DES-T-positive) had significantly higher total scores on the CTQ-28 as well as higher scores on each subgroup of this scale. The highest CTQ-28 subgroup score was emotional neglect, which was followed by emotional abuse and physical neglect and then sexual abuse and physical abuse. There was a significant correlation between total scores on the CTQ-28 and SubDES-2 but none of the CTQ-28 subscale scores was significantly correlated with either SubDES-1 or SubDES-2. The DES sufficiently and reliably identified the experience of dissociative symptoms on the part of BD patients, and a factor analysis revealed two subdimensions of BD on this scale. In particular, DES-T-positive subjects experienced a greater amount of childhood trauma and, as a result, had an earlier age at onset of BD. Additionally, SubDES-2, which was associated with amnesia and depersonalization/derealization, was closely related to illness duration. Copyright © 2015 Elsevier B.V. All rights reserved.

Developpement d'un modele analytique pour l'analyse en elasticite lineaire de champs de deformation et contrainte au sein d'un polycristal. comparaison avec la methode des elements finis =

NASA Astrophysics Data System (ADS)

Bretin, Remy

L'endommagement par fatigue des materiaux est un probleme courant dans de nombreux domaines, dont celui de l'aeronautique. Afin de prevenir la rupture par fatigue des materiaux il est necessaire de determiner leur duree de vie en fatigue. Malheureusement, dues aux nombreuses heterogeneites presentes, la duree de vie en fatigue peut fortement varier entre deux pieces identiques faites dans le meme materiau ayant subi les memes traitements. Il est donc necessaire de considerer ces heterogeneites dans nos modeles afin d'avoir une meilleure estimation de la duree de vie des materiaux. Comme premiere etape vers une meilleure consideration des heterogeneites dans nos modeles, une etude en elasticite lineaire de l'influence des orientations cristallographiques sur les champs de deformations et de contraintes dans un polycristal a ete realisee a l'aide de la methode des elements finis. Des correlations ont pu etre etablies a partir des resultats obtenus, et un modele analytique en elasticite lineaire prenant en compte les distributions d'orientations cristallographiques et les effets de voisinage a pu etre developpe. Ce modele repose sur les bases des modeles d'homogeneisation classique, comme le schema auto-coherent, et reprend aussi les principes de voisinage des automates cellulaires. En prenant pour reference les resultats des analyses elements finis, le modele analytique ici developpe a montre avoir une precision deux fois plus grande que le modele auto-coherent, quel que soit le materiau etudie.

Contribution a l'etude et au developpement de nouvelles poudres de fonte

NASA Astrophysics Data System (ADS)

Boisvert, Mathieu

L'obtention de graphite libre dans des pieces fabriquees par metallurgie des poudres (M/P) est un defi auquel plusieurs chercheurs se sont attardes. En effet, la presence de graphite apres frittage ameliore l'usinabilite des pieces, permettant donc de reduire les couts de production, et peut aussi engendrer une amelioration des proprietes tribologiques. L'approche utilisee dans cette these pour tenter d'obtenir du graphite libre apres frittage est par l'utilisation de nouvelles poudres de fontes atomisees a l'eau. L'atomisation a l'eau etant un procede de production de poudres relativement peu couteux qui permet de grandes capacites de production, le transfert des decouvertes de ce doctorat vers des applications industrielles sera donc economiquement plus favorable. En plus de l'objectif d'obtenir du graphite libre apres frittage, un autre aspect important des travaux est le controle de la morphologie du graphite libre apres frittage. En effet, il est connu dans la litterature des fontes coulees/moulees que la morphologie du graphite influencera les proprietes des fontes, ce qui est aussi vrai pour les pieces de M/P. Les fontes ductiles, pour lesquelles le graphite est sous forme de nodules spheroidaux isoles les uns des autres, possedent des proprietes mecaniques superieures aux fontes grises pour lesquelles le graphite est sous forme lamellaire et continu dans la matrice. Les resultats presentes dans cette these montrent qu'il est possible, dans des melanges contenant des poudres de fontes, d'avoir un controle sur la morphologie du graphite et donc sur les proprietes des pieces. Le controle de la morphologie du graphite a principalement ete realise par le type de frittage et le phenomene de diffusion " uphill " du carbone cause par des gradients en silicium. En effet, pour les frittages en phase solide, tous les nodules de graphite sont presents a l'interieur des grains de poudre apres frittage. Pour les frittages en phase liquide, l'intensite de la diffusion " uphill " permet de conserver plus ou moins de graphite nodulaire a l'interieur des regions riches en silicium, alors que le reste du graphite precipite sous forme lamellaire/vermiculaire dans les regions interparticulaires. L'etude des poudres de fontes et la recherche des mecanismes regissant la morphologie du graphite dans les fontes coulees/moulees nous ont amenes a produire des poudres de fontes traitees au magnesium avant l'atomisation. Plusieurs resultats fondamentaux ont ete obtenus de la caracterisation des poudres traitees au magnesium et de leur comparaison avec des poudres de chimies similaires non traitees au magnesium. D'abord, il a ete possible d'observer des bifilms d'oxyde de silicium dans la structure du graphite primaire d'une poudre de fonte grise hypereutectique. Il s'agit des premieres images montrant la structure double de ces defauts, venant ainsi appuyer la theorie elaboree par le professeur John Campbell. Ensuite, il a ete montre que le traitement au magnesium forme une atmosphere protectrice gazeuse autogeneree qui empeche l'oxydation de la surface du bain liquide et donc, la formation et l'entrainement des bifilms. Le role du magnesium sur la morphologie du graphite est de diminuer le soufre en solution en formant des precipites de sulfure de magnesium et ainsi d'augmenter l'energie d'interface graphite-liquide. En reponse a cette grande energie d'interface graphite-liquide, le graphite cherche a minimiser son ratio surface/volume, ce qui favorise la formation de graphite spheroidal. De plus, deux types de germination ont ete observes dans la poudre de fonte hypereutectique traitee au magnesium. Le premier type est une germination heterogene sur un nombre limite de particules faites de magnesium, d'aluminium, de silicium et d'oxygene. Le deuxieme type est une germination homogene des nodules dans certaines regions du liquide plus riches en silicium. L'observation du centre reel tridimensionnel, en microscopie electronique en transmission en haute resolution, d'un des nodules ayant subi une germination homogene a permis de confirmer que le mode de croissance du graphite spheroidal se produit selon le modele de la croissance en feuille de chou. (Abstract shortened by ProQuest.).

Fragments of the Bacterial Toxin Microcin B17 as Gyrase Poisons

PubMed Central

Collin, Frédéric; Thompson, Robert E.; Jolliffe, Katrina A.; Payne, Richard J.; Maxwell, Anthony

2013-01-01

Fluoroquinolones are very important drugs in the clinical antibacterial arsenal; their success is principally due to their mode of action: the stabilisation of a gyrase-DNA intermediate (the cleavage complex), which triggers a chain of events leading to cell death. Microcin B17 (MccB17) is a modified peptide bacterial toxin that acts by a similar mode of action, but is unfortunately unsuitable as a therapeutic drug. However, its structure and mechanism could inspire the design of new antibacterial compounds that are needed to circumvent the rise in bacterial resistance to current antibiotics. Here we describe the investigation of the structural features responsible for MccB17 activity and the identification of fragments of the toxin that retain the ability to stabilise the cleavage complex. PMID:23593482

Fragments of the bacterial toxin microcin B17 as gyrase poisons.

PubMed

Collin, Frédéric; Thompson, Robert E; Jolliffe, Katrina A; Payne, Richard J; Maxwell, Anthony

2013-01-01

Fluoroquinolones are very important drugs in the clinical antibacterial arsenal; their success is principally due to their mode of action: the stabilisation of a gyrase-DNA intermediate (the cleavage complex), which triggers a chain of events leading to cell death. Microcin B17 (MccB17) is a modified peptide bacterial toxin that acts by a similar mode of action, but is unfortunately unsuitable as a therapeutic drug. However, its structure and mechanism could inspire the design of new antibacterial compounds that are needed to circumvent the rise in bacterial resistance to current antibiotics. Here we describe the investigation of the structural features responsible for MccB17 activity and the identification of fragments of the toxin that retain the ability to stabilise the cleavage complex.

Comment on "Carbon farming in hot, dry coastal areas: an option for climate change mitigation" by Becker et al. (2013)

NASA Astrophysics Data System (ADS)

Heimann, M.

2014-01-01

Becker et al. (2013) argue that an afforestation of 0.73 × 109 ha with Jatropha curcas plants would generate an additional terrestrial carbon sink of 4.3 PgC yr-1, enough to stabilise the atmospheric mixing ratio of carbon dioxide (CO2) at current levels. However, this is not consistent with the dynamics of the global carbon cycle. Using a well-established global carbon cycle model, the effect of adding such a hypothetical sink leads to a reduction of atmospheric CO2 levels in the year 2030 by 25 ppm compared to a reference scenario. However, the stabilisation of the atmospheric CO2 concentration requires a much larger additional sink or corresponding reduction of anthropogenic emissions.

Comment on "Carbon farming in hot, dry coastal areas: an option for climate change mitigation" by Becker et al. (2013)

NASA Astrophysics Data System (ADS)

Heimann, M.

2013-08-01

Becker et al. (2013) argue that an afforestation of 0.73 109 ha with Jatropha curcas plants would generate an additional terrestrial carbon sink of 4.3 PgC yr-1, enough to stabilise the atmospheric mixing ratio of carbon dioxide (CO2) at current levels. However, this is not consistent with the dynamics of the global carbon cycle. Using a well established global carbon cycle model, the effect of adding such a hypothetical sink leads to a reduction of atmospheric CO2 levels in the year 2030 by 25 ppm compared to a reference scenario. However, the stabilisation of the atmospheric CO2 concentration requires a much larger additional sink or corresponding reduction of anthropogenic emissions.

Survey material choices in haematology EQA: a confounding factor in automated counting performance assessment.

PubMed

De la Salle, Barbara

2017-02-15

The complete blood count (CBC) is one of the most frequently requested tests in laboratory medicine, performed in a range of healthcare situations. The provision of an ideal assay material for external quality assessment is confounded by the fragility of the cellular components of blood, the lack of commutability of stabilised whole blood material and the lack of certified reference materials and methods to which CBC results can be traced. The choice of assay material between fresh blood, extended life assay material and fully stabilised, commercially prepared, whole blood material depends upon the scope and objectives of the EQA scheme. The introduction of new technologies in blood counting and the wider clinical application of parameters from the extended CBC will bring additional challenges for the EQA provider.

Synthesis of dense yttrium-stabilised hafnia pellets for nuclear applications by spark plasma sintering

NASA Astrophysics Data System (ADS)

Tyrpekl, Vaclav; Holzhäuser, Michael; Hein, Herwin; Vigier, Jean-Francois; Somers, Joseph; Svora, Petr

2014-11-01

Dense yttrium-stabilised hafnia pellets (91.35 wt.% HfO2 and 8.65 wt.% Y2O3) were prepared by spark plasma sintering consolidation of micro-beads synthesised by the "external gelation" sol-gel technique. This technique allows a preparation of HfO2-Y2O3 beads with homogenous yttria-hafnia solid solution. A sintering time of 5 min at 1600 °C was sufficient to produce high density pellets (over 90% of the theoretical density) with significant reproducibility. The pellets have been machined in a lathe to the correct dimensions for use as neutron absorbers in an experimental test irradiation in the High Flux Reactor (HFR) in Petten, Holland, in order to investigate the safety of americium based nuclear fuels.

Positron annihilation studies of zirconia doped with metal cations of different valence

NASA Astrophysics Data System (ADS)

Prochazka, I.; Cizek, J.; Melikhova, O.; Konstantinova, T. E.; Danilenko, I. A.; Yashchishyn, I. A.; Anwand, W.; Brauer, G.

2013-06-01

New results obtained by applying positron annihilation spectroscopy to the investigation of zirconia-based nanomaterials doped with metal cations of different valence are reported. The slow-positron implantation spectroscopy combined with Doppler broadening measurements was employed to study the sintering of pressure-compacted nanopowders of tetragonal yttria-stabilised zirconia (t-YSZ) and t-YSZ with chromia additive. Positronium (Ps) formation in t-YSZ was proven by detecting 3γ-annihilations of ortho-Ps and was found to gradually decrease with increasing sintering temperature. A subsurface layer with enhanced 3γ-annihilations, compared to the deeper regions, could be identified. Addition of chromia was found to inhibit Ps formation. In addition, first results of positron lifetime measurements on nanopowders of zirconia phase-stabilised with MgO and CeO2 are presented.

Global embedding of fibre inflation models

NASA Astrophysics Data System (ADS)

Cicoli, Michele; Muia, Francesco; Shukla, Pramod

2016-11-01

We present concrete embeddings of fibre inflation models in globally consistent type IIB Calabi-Yau orientifolds with closed string moduli stabilisation. After performing a systematic search through the existing list of toric Calabi-Yau manifolds, we find several examples that reproduce the minimal setup to embed fibre inflation models. This involves Calabi-Yau manifolds with h 1,1 = 3 which are K3 fibrations over a ℙ1 base with an additional shrinkable rigid divisor. We then provide different consistent choices of the underlying brane set-up which generate a non-perturbative superpotential suitable for moduli stabilisation and string loop corrections with the correct form to drive inflation. For each Calabi-Yau orientifold setting, we also compute the effect of higher derivative contributions and study their influence on the inflationary dynamics.

Caracterisation environnementale des emissions atmospheriques d'une source fixe et creation d'un outil de gestion dynamique =

NASA Astrophysics Data System (ADS)

Fournier, Marie-Claude

Une caracterisation des emissions atmospheriques provenant des sources fixes en operation, alimentees au gaz et a l'huile legere, a ete conduite aux installations visees des sites no.1 et no.2. La caracterisation et les calculs theoriques des emissions atmospheriques aux installations des sites no.1 et no.2 presentent des resultats qui sont en dessous des valeurs reglementaires pour des conditions d'operation normales en periode hivernale et par consequent, a de plus fortes demandes energetiques. Ainsi, pour une demande energetique plus basse, le taux de contaminants dans les emissions atmospheriques pourrait egalement etre en dessous des reglementations municipales et provinciales en vigueur. Dans la perspective d'une nouvelle reglementation provinciale, dont les termes sont discutes depuis 2005, il serait souhaitable que le proprietaire des infrastructures visees participe aux echanges avec le Ministere du Developpement Durable, de l'Environnement et des Parcs (MDDEP) du Quebec. En effet, meme si le principe de droit acquis permettrait d'eviter d'etre assujetti a la nouvelle reglementation, l'application de ce type de principe ne s'inscrit pas dans ceux d'un developpement durable. L'âge avance des installations etudiees implique la planification d'un entretien rigoureux afin d'assurer les conditions optimales de combustion en fonction du type de combustible. Des tests de combustion sur une base reguliere sont donc recommandes. Afin de supporter le processus de suivi et d'evaluation de la performance environnementale des sources fixes, un outil d'aide a la gestion de l'information environnementale a ete developpe. Dans ce contexte, la poursuite du developpement d'un outil d'aide a la gestion de l'information environnementale faciliterait non seulement le travail des personnes affectees aux inventaires annuels mais egalement le processus de communication entre les differents acteurs concernes tant intra- qu'inter-etablissement. Cet outil serait egalement un bon moyen pour sensibiliser le personnel a leur consommation energetique ainsi qu'a leur role dans la lutte contre les emissions polluantes et les gaz a effets de serre. En outre, ce type d'outil a pour principale fonction de generer des rapports dynamiques pouvant s'adapter a des besoins precis. Le decoupage coherent de l'information associe a un developpement par modules offre la perspective d'application de l'outil pour d'autres types d'activites. Dans ce cas, il s'agit de definir la part commune avec les modules existants et planifier les activites de developpement specifiques selon la meme demarche que celle presentee dans le present document.

The use of biogas plant fermentation residue for the stabilisation of toxic metals in agricultural soils

NASA Astrophysics Data System (ADS)

Geršl, Milan; Šotnar, Martin; Mareček, Jan; Vítěz, Tomáš; Koutný, Tomáš; Kleinová, Jana

2015-04-01

Our department has been paying attention to different methods of soil decontamination, including the in situ stabilisation. Possible reagents to control the toxic metals mobility in soils include a fermentation residue (FR) from a biogas plant. Referred to as digestate, it is a product of anaerobic decomposition taking place in such facilities. The fermentation residue is applied to soils as a fertiliser. A new way of its use is the in situ stabilisation of toxic metals in soils. Testing the stabilisation of toxic metals made use of real soil samples sourced from five agriculturally used areas of the Czech Republic with 3 soil samples taken from sites contaminated with Cu, Pb and Zn and 2 samples collected at sites of natural occurrence of Cu, Pb and Zn ores. All the samples were analysed using the sequential extraction procedure (BCR) (determine the type of Cu, Pb and Zn bonds). Stabilisation of toxic metals was tested in five soil samples by adding reagents as follows: dolomite, slaked lime, goethite, compost and fermentation residue. A single reagent was added at three different concentrations. In the wet state with the added reagents, the samples were left for seven days, shaken twice per day. After seven days, metal extraction was carried out: samples of 10 g soil were shaken for 2 h in a solution of 0.1M NH4NO3 at a 1:2.5 (g.ml-1), centrifuged for 15 min at 5,000 rpm and then filtered through PTFE 0.45 μm mesh filters. The extracts were analysed by ICP-OES. Copper The best reduction of Cu concentration in the extract was obtained at each of the tested sites by adding dolomite (10 g soil + 0.3 g dolomite). The concentration of Cu in the leachate decreased to 2.1-18.4% compare with the leachate without addition. Similar results were also shown for the addition of fermentation residue (10 g soil + 1 g FR). The Cu concentration in the leachate decreased to 16.7-26.8% compared with the leachate without addition. Lead The best results were achieved by adding slaked lime (10 g soil + 0.5 Ca(OH)2), where the concentration of Pb in the extract decreased to 0.2-8.3%. Adding dolomite (10 g soil + 0.3 g dolomite) achieved a reduction of Pb concentration to 0.4-9.1%. The addition of fermentation residue (10 g soil sample + 2 g FR) caused the concentration of Pb to decrease to 4.6-15.6%. Zinc The best reduction of Zn concentration in the extract was obtained by adding dolomite (10 g soil + 0.5 g dolomite). The concentration of Cu in the leachate decreased to 0.3-29.4%. Similar properties were obtained by adding fermentation residue (10 g soil + 2 g FR), when the Zn concentration decreased to 1.0-24.3%. The waste product of biogas plants can be used for stabilising the bonds of some toxic metals in soils while making use of its fertilising properties to improve soil quality. The research was conducted with the support of the project entitled "Postdoc contracts at MENDELU technical and ekonomical research" (CZ.1.07/2.3.00/30.0031).

Strategies facilitant les tests en pre-certification pour la robustesse a l'egard des radiations =

NASA Astrophysics Data System (ADS)

Souari, Anis

Les effets des radiations cosmiques sur l'electronique embarquee preoccupent depuis. quelques decennies les chercheurs interesses par la robustesse des circuits integres. Plusieurs. recherches ont ete menees dans cette direction, principalement pour les applications spatiales. ou l’environnement de leur deploiement est hostile. En effet, ces environnements sont denses. en termes de particules qui, lorsqu’elles interagissent avec les circuits integres, peuvent. mener a leur dysfonctionnement, voir meme a leur destruction. De plus, les effets des. radiations s’accentuent pour les nouvelles generations des circuits integres ou la diminution. de la taille des transistors et l’augmentation de la complexite de ces circuits augmentent la. probabilite d’apparition des anomalies et par consequence la croissance des besoins de test. L’expansion de l’electronique grand public (commercial off-the-shelf, COTS) et l’adoption. de ces composants pour des applications critiques comme les applications avioniques et. spatiales incitent egalement les chercheurs a doubler les efforts de verification de la fiabilite. de ces circuits. Les COTS, malgre leurs meilleures caracteristiques en comparaison avec les. circuits durcis tolerants aux radiations qui sont couteux et en retard en termes de technologie. utilisee, sont vulnerables aux radiations. Afin d’ameliorer la fiabilite de ces circuits, une evaluation de leur vulnerabilite dans les. differents niveaux d’abstraction du flot de conception est recommandee. Ceci aide les. concepteurs a prendre les mesures de mitigation necessaires sur le design au niveau. d’abstraction en question. Enfin, afin de satisfaire les exigences de tolerance aux pannes, des. tests tres couteux de certification, obtenus a l’aide de bombardement de particules (protons, neutrons, etc.), sont necessaires. Dans cette these, nous nous interessons principalement a definir une strategie de precertification. permettant d’evaluer d’une facon realiste la sensibilite des circuits integres face. aux effets des radiations afin d’eviter d’envoyer des circuits non robustes a la phase tres. couteuse de la certification. Les circuits cibles par nos travaux sont les circuits integres. programmables par l’usager (FPGA) a base de memoire SRAM et le type de pannes ciblees, causees par les radiations, est les SEU (single event upset) consistant a un basculement de. l’etat logique d’un element de memoire a son complementaire. En effet, les FPGA a base de. memoire SRAM sont de plus en plus demandes par la communaute de l’aerospatial grace a. leurs caracteristiques de prototypage rapide et de reconfiguration sur site mais ils sont. vulnerables face aux radiations ou les SEU sont les pannes les plus frequentes dans les. elements de memoire de type SRAM. Nous proposons une nouvelle approche d’injection de. pannes par emulation permettant de mimer les effets des radiations sur la memoire de. configuration des FPGA et de generer des resultats les plus fideles possibles des resultats des. tests de certification. Cette approche est basee sur la consideration de la difference de. sensibilite des elements de memoire de configuration lorsqu’ils sont a l’etat '1' et a l’etat '0', observee sous des tests acceleres sous faisceaux de protons au renomme laboratoire. TRIUMF, dans la procedure de generation des sequences de test dans le but de mimer la. distribution des pannes dans la memoire de configuration. Les resultats des experimentations. de validation montrent que la strategie proposee est efficace et genere des resultats realistes. Ces resultats revelent que ne pas considerer la difference de sensibilite peut mener a une. sous-estimation de la sensibilite des circuits face aux radiations. Dans la meme optique d’optimisation de la procedure d’injection des pannes par emulation, a. savoir le test de pre-certification, nous proposons une methodologie permettant de maximiser. la detection des bits critiques (bits provoquant une defaillance fonctionnelle s’ils changent. d’etat) pour un nombre bien determine de SEU (qui est le modele de pannes adopte) ou de. maximiser la precision de l’estimation de nombre des bits critiques. Pour ce faire, une. classification des bits de configuration en differents ensembles est tout d’abord mise en. oeuvre, selon leur contenu, les ressources qu’ils configurent et leur criticite. Ensuite, une. evaluation de la sensibilite de chaque ensemble est accomplie. Enfin, la priorisation. d’injection des pannes dans les ensembles les plus sensibles est recommandee. Plusieurs. scenarios d’optimisation d’injection des pannes sont proposes et les resultats sont compares. avec ceux donnes par la methode conventionnelle d’injection aleatoire des pannes. La. methodologie d’optimisation proposee assure une amelioration de plus de deux ordres de. grandeur. Une derniere approche facilitant l’evaluation de la sensibilite des bits configurant les LUT. (look up table) de FPGA, les plus petites entites configurables du FPGA permettant. d’implementer des fonctions combinatoires, utilises par un design est presentee. Elle permet. l’identification facile et sans cout en termes d’utilisation du materiel ou d’outils externes des. bits des LUT. L’approche proposee est simple et efficace, offrant une couverture de pannes. de 100 % et applicable aux nouvelles generations des FPGA de Xilinx. Les approches proposees contribuent a repondre aux exigences du cahier des charges de cette. these et a achever les objectifs definis. Le realisme et la maximisation de l’estimation de la. vulnerabilite des circuits sous test offerts par les nouvelles approches assurent le. developpement d’une strategie de test en pre-certification efficace. En effet, la premiere. approche d’injection de pannes considerant la difference de sensibilite relative des elements. de memoire selon leur contenu genere des resultats donnant une erreur relative atteignant. 3.1 % quand compares aux resultats obtenus a TRIUMF alors que l’erreur relative donnee. par la comparaison des resultats d’une injection conventionnelle aleatoire de pannes avec. ceux de TRIUMF peut atteindre la valeur de 75 %. De plus, l’application de cette approche a. des circuits plus conventionnels montre que 2.3 fois plus d’erreurs sont detectees en. comparaison avec l’injection aleatoire des pannes. Ceci suggere que ne pas considerer la. difference de sensibilite relative dans la procedure d’emulation peut mener a une sousestimation. de la sensibilite du design face aux radiations. Les resultats de la deuxieme. approche proposee ont ete aussi compares aux resultats d’une injection aleatoire de pannes. L’approche proposee, maximisant le nombre des bits critiques inverses, permet d’atteindre. un facteur d’acceleration de 108 de la procedure d’injection des pannes en comparaison a. l’approche aleatoire. Elle permet aussi de minimiser l’erreur d’estimation du nombre des bits. critiques pour atteindre une valeur de ±1.1 % calculee pour un intervalle de confiance de. 95 % tandis que la valeur d’erreur d’estimation des bits critiques generee par l’approche. aleatoire d’injection des pannes pour le meme intervalle de confiance peut atteindre ±8.6 %. Enfin, la derniere approche proposee d’injection de pannes dans les LUT se distingue des. autres approches disponibles dans la litterature par sa simplicite tout en assurant une. couverture maximale de pannes de 100 %. En effet, l’approche proposee est independante. des outils externes permettant d’identifier les bits configurant les LUT qui sont obsoletes ou. ne supportent pas les nouvelles generations des FPGA. Elle agit directement sur les fichiers. generes par l’outil de synthese adopte.

Les soins aux enfants et aux adolescents des familles des militaires canadiens : les considérations particulières

PubMed Central

Rowan-Legg, Anne

2017-01-01

Résumé Les familles des militaires font face à de nombreux facteurs de stress, tels que les réinstallations fréquentes, les longues pério des de séparation familiale, l’isolement géographique du réseau de soutien de la famille élargie et le déploiement en zones très dangereuses. Les enfants et les adolescents des familles des militaires vivent les mêmes trajectoires développementales et motivationnelles que leurs homologues civils, mais ils sont également aux prises avec des pressions et des facteurs de stress liés à leur développement qui sont inhabituels et qui leur sont imposés par les exigences de la vie militaire. Les effets de la vie militaire sur les familles et les enfants commencent à être admis et mieux caractérisés. Il est essentiel de comprendre les préoccupations propres aux enfants et aux adolescents des familles des militaires et de mobiliser les ressources nécessaires pour les soutenir afin de répondre à leurs besoins en matière de santé.

Mouse hypospadias: A critical examination and definition.

PubMed

Sinclair, Adriane Watkins; Cao, Mei; Shen, Joel; Cooke, Paul; Risbridger, Gail; Baskin, Laurence; Cunha, Gerald R

2016-12-01

Hypospadias is a common malformation whose etiology is based upon perturbation of normal penile development. The mouse has been previously used as a model of hypospadias, despite an unacceptably wide range of definitions for this malformation. The current paper presents objective criteria and a definition of mouse hypospadias. Accordingly, diethylstilbestrol (DES) induced penile malformations were examined at 60 days postnatal (P60) in mice treated with DES over the age range of 12 days embryonic to 20 days postnatal (E12-P20). DES-induced hypospadias involves malformation of the urethral meatus, which is most severe in DES E12-P10, DES P0-P10 and DES P5-P15 groups, and less so or absent in the other treatment groups. A frenulum-like ventral tether between the penis and the prepuce was seen in the most severely affected DES-treated mice. Internal penile morphology was also altered in the DES E12-P10, DES P0-P10 and DES P5-P15 groups (with little effect in the other DES treatment groups). Thus, adverse effects of DES are a function of the period of DES treatment and most severe in the P0-P10 period. In "estrogen mutant mice" (NERKI, βERKO, αERKO and AROM+) hypospadias was only seen in AROM+ male mice having genetically-engineered elevation is serum estrogen. Significantly, mouse hypospadias was only seen distally at and near the urethral meatus where epithelial fusion events are known to take place and never in the penile midshaft, where urethral formation occurs via an entirely different morphogenetic process. Copyright © 2016 International Society of Differentiation. Published by Elsevier B.V. All rights reserved.

Lignes directrices sur la prise en charge en soins primaires des céphalées chez l’adulte

PubMed Central

Becker, Werner J.; Findlay, Ted; Moga, Carmen; Scott, N. Ann; Harstall, Christa; Taenzer, Paul

2015-01-01

Résumé Objectif Accroître l’utilisation d’approches éclairées par des données probantes pour diagnostiquer, investiguer et traiter en soins primaires les céphalées des patients. Qualité des données Une recherche documentaire exhaustive a été effectuée pour trouver des lignes directrices et des révisions systématiques publiées entre janvier 2000 et mai 2011. La grille d’évaluation de la qualité des recommandations pour la pratique clinique AGREE a servi à l’analyse critique des lignes directrices. Les 6 guides de pratique clinique de la plus grande qualité ont servi de base dans le processus d’adaptation. Message principal Un groupe d’élaboration multidisciplinaire de professionnels des soins primaires ont formulé 91 recommandations précises à l’aide d’un processus consensuel. Les recommandations portent sur le diagnostic, l’investigation et la prise en charge de la migraine, de la céphalée de tension, de la céphalée due à une surmédication et de la céphalée vasculaire de Horton. Conclusion Un guide de pratique clinique adapté au contexte des soins de santé au Canada a été produit en suivant un processus d’adaptation de lignes directrices dans le but d’aider les professionnels de toutes les disciplines des soins primaires à dispenser des soins éclairés par des données probantes aux patients souffrant de céphalées.

Les Cicatrices Retractiles Post-Brulures Du Membre Inferieur Chez L’Enfant

PubMed Central

Sankale, A.A.; Manyacka Ma Nyemb, P.; Coulibaly, N.F.; Ndiaye, A.; Ndoye, M.

2010-01-01

Summary Il s'agit d'une étude faisant ressortir les aspects épidémiologiques, cliniques et thérapeutiques des séquelles de brûlures du membre inférieur chez l'enfant, à propos de 42 cas colligés au service de chirurgie infantile de l'Hôpital Aristide Le Dantec (Sénégal). L'âge moyen retrouvé est de 5 ans et 3 mois, et le sex-ratio garçons/filles de 1,8/1. La brûlure thermique est causée par une flamme dans 33% des cas, par un liquide chaud dans 21% des cas, et par des braises dans 21% des cas. Les cicatrices rétractiles intéressent le genou et le creux poplité dans 47% des cas et le pied dans 45% des cas. Elles sont bilatérales dans 21% des cas, et concernent une autre localisation associée dans 21% des cas. Quant aux brides, 21% ont bénéficié d'une chirurgie, avec un délai moyen de 3 ans et 2 mois après la brûlure. Cette procédure chirurgicale consiste en une plastie en Z dans 91% des cas, à laquelle est associée une greffe de peau dans 54% des cas. Une rééducation fonctionnelle est pratiquée chez 54% des opérés. Parallèlement aux données de la littérature, nos résultats montrent que l'optimisation de la prise en charge passe par une meilleure prévention des accidents domestiques et une bonne codification thérapeutique. PMID:21991202

Radar response to crop residue cover and tillage application on postharvest agricultural surfaces

NASA Astrophysics Data System (ADS)

McNairn, Heather

Les informations sur les pratiques de conservation des sols comme le labourage et la gestion des residus de culture sont requises afin d'estimer avec exactitude les risques d'erosion des sols. Quoique les micro-ondes soient sensibles aux conditions d'humidite et aux proprietes geometriques des surfaces, il n'en demeure pas moins que l'on connait encore peu sur la sensibilite des micro-ondes polarisees lineaires ou des parametres polarimetriques du ROS en fonction des caracteristiques des residus. A partir de donnees prises a l'aide d'un diffusometre monte sur un camion en 1996 et lors d'une mission SIR-C menee en 1994, cette recherche a demontre que les micro-ondes sont sensibles a la fois a la quantite et au type de couverture de residus, de meme qu'a la teneur en eau des residus. La reponse des polarisations croisees lineaires et de plusieurs parametres polarimetriques, incluant la hauteur pedestre, a permis d'observer qu'une diffusion volumique importante avait lieu en presence de vegetation senescente qui se tenait debout et pour les champs non laboures. La diffusion de surface dominait cependant pour les champs avec de faibles quantites de residus et des residus plus fins. La recherche a toutefois demontre que des conditions de surface complexes etaient crees par differentes combinaisons de residus et de pratiques de labourage. Par consequent, il faudra attendre que des donnees multi-polarisees ou polarimetriques soient acquises par les capteurs prevus a bord du satellite canadien RADARSAT-2 et du satellite ENVISAT de l'Agence spatiale europeenne avant de pouvoir completement caracteriser les champs apres la recolte.

The desA and desB genes from Clostridium scindens ATCC 35704 encode steroid-17,20-desmolase.

PubMed

Devendran, Saravanan; Mythen, Sean M; Ridlon, Jason M

2018-06-01

Clostridium scindens is a gut microbe capable of removing the side-chain of cortisol, forming 11β-hydro-xyandrostenedione. A cortisol-inducible operon ( desABCD ) was previously identified in C. scindens ATCC 35704 by RNA-Seq. The desC gene was shown to encode a cortisol 20α-hydroxysteroid dehydrogenase (20α-HSDH). The desD encodes a protein annotated as a member of the major facilitator family, predicted to function as a cortisol transporter. The desA and desB genes are annotated as N-terminal and C-terminal transketolases, respectively. We hypothesized that the DesAB forms a complex and has steroid-17,20-desmolase activity. We cloned the desA and desB genes from C. scindens ATCC 35704 in pETDuet for overexpression in Escherichia coli The purified recombinant DesAB was determined to be a 142 ± 5.4 kDa heterotetramer. We developed an enzyme-linked continuous spectrophotometric assay to quantify steroid-17,20-desmolase. This was achieved by coupling DesAB-dependent formation of 11β-hydroxyandrostenedione with the NADPH-dependent reduction of the steroid 17-keto group by a recombinant 17β-HSDH from the filamentous fungus, Cochliobolus lunatus The pH optimum for the coupled assay was 7.0 and kinetic constants using cortisol as substrate were K m of 4.96 ± 0.57 µM and k cat of 0.87 ± 0.076 min -1 Substrate-specificity studies revealed that rDesAB recognized substrates regardless of 11β-hydroxylation, but had an absolute requirement for 17,21-dihydroxy 20-ketosteroids. Copyright © 2018 Devendran et al.

Exemples d’utilisation des techniques d’optimisation en calcul de structures de reacteurs

DTIC Science & Technology

2003-03-01

34~ optimisation g~om~trique (architecture fig~e) A la difference du secteur automobile et des avionneurs, la plupart des composants des r~acteurs n...utilise des lois de comportement mat~riaux non lin~aires ainsi que des hypotheses de grands d~placements. L𔄀tude d’optimisation consiste ý minimiser...un disque simple et d~cid6 de s~lectionner trois param~tes qui influent sur la rupture : 1𔄀paisseur de la toile du disque ElI, la hauteur L3 et la

[Outstanding problems of normal and pathological morphology of the diffuse endocrine system].

PubMed

Iaglov, V V; Iaglova, N V

2011-01-01

The diffuse endocrine system (DES)--a mosaic-cellular endoepithelial gland--is the biggest part of the human endocrine system. Scientists used to consider cells of DES as neuroectodermal. According to modem data cells of DES are different cytogenetic types because they develop from the different embryonic blastophyllum. So that any hormone-active tumors originated from DES of the digestive, respiratory and urogenital system shouldn't be considered as neuroendocrinal tumors. The basic problems of DES morphology and pathology are the creation of scientifically substantiated histogenetic classification of DES tumors.

Hypocalcémie

PubMed Central

Fong, Jeremy; Khan, Aliya

2012-01-01

Résumé Objectif Présenter aux médecins de famille une approche fondée sur des données probantes pour le diagnostic et la prise en charge de l’hypocalcémie. Qualité des données On a fait une recherche documentaire dans MEDLINE et EMBASE pour cerner des articles parus de 2000 à 2010 portant sur le diagnostic et la prise en charge de l’hypocalcémie. Les niveaux des données (de I à III) sont indiqués, le cas échéant et, dans la plupart des études, les données se situent aux niveaux II et III. On a aussi examiné les références des ouvrages appropriés pour trouver des articles pertinents. Message principal L’hypocalcémie est habituellement attribuable à des taux insuffisants d’hormones parathyroïdes ou de vitamine D ou à une résistance à ces hormones. Le traitement consiste surtout à administrer des suppléments de calcium et de vitamine D par voie orale, ainsi que de magnésium s’il y a carence. On peut intensifier davantage le traitement avec des diurétiques thiazidiques, des chélateurs de phosphore et un régime à faible teneur en sel et en phosphore quand on traite une hypocalcémie secondaire à une hypoparathyroïdie. Une carence en calcium aiguë et dangereuse pour la vie exige un traitement au moyen de calcium intraveineux. Les recommandations thérapeutiques actuelles se fondent largement sur l’opinion d’experts cliniciens et de rapports de cas publiés, car il n’y a pas suffisamment de données probantes disponibles tirées d’études cliniques contrôlées. Au nombre des complications des thérapies actuelles, on peut mentionner l’hypercalciurie, la néphrocalcinose, l’insuffisance rénale et la calcification des tissus mous. La thérapie actuelle est limitée par les fluctuations du calcium sérique. Quoique ces complications soient bien reconnues, les effets sur le bien-être général, l’humeur, la fonction cognitive et la qualité de vie, ainsi que les risques de complications, n’ont pas été adéquatement étudiés. Conclusion Les médecins de famille jouent un rôle central dans l’éducation des patients à propos de la prise en charge à long terme et des complications de l’hypocalcémie. À l’heure actuelle, la prise en charge est sous-optimale et marquée par des fluctuations dans le calcium sérique et l’absence d’une thérapie de remplacement des hormones parathyroïdes homologuée pour l’hypoparathyroïdie.

Developpement d'une methode calorimetrique de mesure des pertes ac pour des rubans supraconducteurs a haute temperature critique

NASA Astrophysics Data System (ADS)

Dolez, Patricia

Le travail de recherche effectue dans le cadre de ce projet de doctorat a permis la mise au point d'une methode de mesure des pertes ac destinee a l'etude des supraconducteurs a haute temperature critique. Pour le choix des principes de cette methode, nous nous sommes inspires de travaux anterieurs realises sur les supraconducteurs conventionnels, afin de proposer une alternative a la technique electrique, presentant lors du debut de cette these des problemes lies a la variation du resultat des mesures selon la position des contacts de tension sur la surface de l'echantillon, et de pouvoir mesurer les pertes ac dans des conditions simulant la realite des futures applications industrielles des rubans supraconducteurs: en particulier, cette methode utilise la technique calorimetrique, associee a une calibration simultanee et in situ. La validite de la methode a ete verifiee de maniere theorique et experimentale: d'une part, des mesures ont ete realisees sur des echantillons de Bi-2223 recouverts d'argent ou d'alliage d'argent-or et comparees avec les predictions theoriques donnees par Norris, nous indiquant la nature majoritairement hysteretique des pertes ac dans nos echantillons; d'autre part, une mesure electrique a ete realisee in situ dont les resultats correspondent parfaitement a ceux donnes par notre methode calorimetrique. Par ailleurs, nous avons compare la dependance en courant et en frequence des pertes ac d'un echantillon avant et apres qu'il ait ete endommage. Ces mesures semblent indiquer une relation entre la valeur du coefficient de la loi de puissance modelisant la dependance des pertes avec le courant, et les inhomogeneites longitudinales du courant critique induites par l'endommagement. De plus, la variation en frequence montre qu'au niveau des grosses fractures transverses creees par l'endommagement dans le coeur supraconducteur, le courant se partage localement de maniere a peu pres equivalente entre les quelques grains de matiere supraconductrice qui restent fixes a l'interface coeur-enveloppe, et le revetement en alliage d'argent. L'interet d'une methode calorimetrique par rapport a la technique electrique, plus rapide, plus sensible et maintenant fiable, reside dans la possibilite de realiser des mesures de pertes ac dans des environnements complexes, reproduisant la situation presente par exemple dans un cable de transport d'energie ou dans un transformateur. En particulier, la superposition d'un courant dc en plus du courant ac habituel nous a permis d'observer experimentalement, pour la premiere fois a notre connaissance, un comportement particulier des pertes ac en fonction de la valeur du courant dc decrit theoriquement par LeBlanc. Nous avons pu en deduire la presence d'un courant d'ecrantage Meissner de 16 A, ce qui nous permet de determiner les conditions dans lesquelles une reduction du niveau de pertes ac pourrait etre obtenue par application d'un courant dc, phenomene denomme "vallee de Clem".

L’offre des services de vaccination en milieu urbain, au Cameroun: étude de cas du District de Santé de Djoungolo

PubMed Central

Ngomba, Armelle Viviane; Kollo, Basile; Bita, André Fouda; Djouma, Fabrice Nembot; Edengue, Jean Marie; Elongue, Marie Josée; Adiogo, Dieudonné

2016-01-01

Introduction Les métropoles camerounaises concentrent un nombre croissant d'enfants cibles, non atteints par les services de vaccination de routine. Méthodes Une étude transversale descriptive, basée sur échantillonnage exhaustif des formations sanitaires légales offrant en routine des services de vaccination a été réalisée dans le district de santé de Djoungolo, (ville de Yaoundé). L'évaluation de l'offre des services de vaccination a été calquée sur l'approche « Atteindre Chaque District ». Résultats Des 70 formations sanitaires ayant participé à l'étude, 3 (4,3%) disposaient d'un micro plan actualisé pour la vaccination de routine. Des 63 (89,4%) formations sanitaires possédant un réfrigérateur fonctionnel, 12 (19,0%) vaccinaient au quotidien en stratégie fixe. Cinquante-sept (81,0%) formations sanitaires ne conduisaient pas des sessions de vaccination en stratégies avancées. La participation des membres de la communauté aux activités de vaccination de routine étaient effective dans 1 aire de santé sur les 12 que compte le district. Une courbe de suivi des couvertures vaccinales correctement renseignée étaient disponible dans 6 (8,5%) formations sanitaires. Conclusion L'approche « Atteindre Chaque District » telle que mise en œuvre dans le district de santé de Djoungolo limite l'atteinte d'un maximum d'enfants cibles. L'effectivité d'une micro planification réaliste, la régularité des sessions de vaccination en stratégie fixes et avancées, le suivi des données orienté vers l'action, la redynamisation communautaire en faveur de la vaccination sont des voies d'amélioration des prestations des services de vaccination, dans ce district. PMID:28292168

Cancer du sein au Maroc: profil phénotypique des tumeurs

PubMed Central

Khalil, Ahmadaye Ibrahim; Bendahhou, Karima; Mestaghanmi, Houriya; Saile, Rachid; Benider, Abdellatif

2016-01-01

Le cancer du sein est le plus fréquent chez la femme et figure parmi les principales causes de mortalité liées au cancer. La curabilité de ce type tumoral est en augmentation, grâce aux programmes de dépistage et aux progrès thérapeutiques, qui ont certes augmenté la survie des patients. Mais des défis restent à relever en rapport avec l’instabilité phénotypique des cellules cancéreuses. L’objectif de ce travail est d’étudier le profil phénotypique du cancer du sein chez les patients pris en charge au Centre Mohammed VI pour le traitement des Cancers, durant les années 2013-2014. Il s’agit d’une étude transversale sur deux années, incluant les cas du cancer du sein pris en charge au Centre. Le recueil des données était fait à partir des dossiers des patients et analysés par le logiciel Epi Info. 1277 patients ont été pris en charge au sein de notre centre. 99,5% des cas de sexe féminin, l’âge moyen était 50,20 ± 11,34 ans. Le type histologique le plus fréquent était le carcinome canalaire infiltrant (80,7% des cas). Le stade diagnostic était précoce (56,9%). Le phénotype moléculaire le plus fréquent était le luminal A (41,4% des cas). Le luminal B, le HER2 et les triples négatifs étaient dans respectivement 10,4%, 6,3%, 11,2% des cas. L’étude du phénotype tumoral des patients atteints du cancer du sein permet l’orientation du clinicien dans le choix du traitement, et des décideurs dans la planification de programmes de lutte contre cette pathologie. PMID:28292037

Le recours aux modeles dans l'enseignement de la biologie au secondaire : Conceptions d'enseignantes et d'enseignants et modes d'utilisation

NASA Astrophysics Data System (ADS)

Varlet, Madeleine

Le recours aux modeles et a la modelisation est mentionne dans la documentation scientifique comme un moyen de favoriser la mise en oeuvre de pratiques d'enseignement-apprentissage constructivistes pour pallier les difficultes d'apprentissage en sciences. L'etude prealable du rapport des enseignantes et des enseignants aux modeles et a la modelisation est alors pertinente pour comprendre leurs pratiques d'enseignement et identifier des elements dont la prise en compte dans les formations initiale et disciplinaire peut contribuer au developpement d'un enseignement constructiviste des sciences. Plusieurs recherches ont porte sur ces conceptions sans faire de distinction selon les matieres enseignees, telles la physique, la chimie ou la biologie, alors que les modeles ne sont pas forcement utilises ou compris de la meme maniere dans ces differentes disciplines. Notre recherche s'est interessee aux conceptions d'enseignantes et d'enseignants de biologie au secondaire au sujet des modeles scientifiques, de quelques formes de representations de ces modeles ainsi que de leurs modes d'utilisation en classe. Les resultats, que nous avons obtenus au moyen d'une serie d'entrevues semi-dirigees, indiquent que globalement leurs conceptions au sujet des modeles sont compatibles avec celle scientifiquement admise, mais varient quant aux formes de representations des modeles. L'examen de ces conceptions temoigne d'une connaissance limitee des modeles et variable selon la matiere enseignee. Le niveau d'etudes, la formation prealable, l'experience en enseignement et un possible cloisonnement des matieres pourraient expliquer les differentes conceptions identifiees. En outre, des difficultes temporelles, conceptuelles et techniques peuvent freiner leurs tentatives de modelisation avec les eleves. Toutefois, nos resultats accreditent l'hypothese que les conceptions des enseignantes et des enseignants eux-memes au sujet des modeles, de leurs formes de representation et de leur approche constructiviste en enseignement representent les plus grands obstacles a la construction des modeles en classe. Mots-cles : Modeles et modelisation, biologie, conceptions, modes d'utilisation, constructivisme, enseignement, secondaire.

Facteurs de risque cardiovasculaires au cours du lupus systémique

PubMed Central

Harzallah, Amel; Hajji, Mariem; Kaaroud, Hayet; Hamida, Fethi Ben; Abdallah, Taieb Ben

2015-01-01

Cette étude a pour objectif d’évaluer la fréquence des facteurs de risque cardiovasculaires au cours du lupus et de préciser leur prévalence. Etude rétrospective portant sur 250 patients ayant un lupus, diagnostiqué selon les critères de l'ACR, hospitalisés entre 1970 et 2013. Les données cliniques et para cliniques ont été recueillies à partir des observations médicales. Il s'agit de 228 femmes et 22 hommes d’âge moyen au diagnostic du lupus de 30, 32 ans (extrêmes: 16-69). La durée moyenne du suivi des patients était de 64 mois (extrêmes: 7 jours- 382mois). Quatre vingt dix patients (36%) étaient hypertendus, 74% avaient une hypercholestérolémie et 22% étaient diabétiques. Pour les autres facteurs de risque cardiovasculaire traditionnels, un âge > 50 ans a été retrouvé dans 40% des cas, le sexe masculin dans 8% des cas, l'obésité dans 76% des cas et le tabagisme dans 11% des cas. Les facteurs de risque surajoutés sont représentés par la présence des anticorps antiphospholipides (47% des cas), la néphropathie lupique (49% des cas), l'insuffisance rénale (42% des cas), la corticothérapie au long cours (74% des cas) et la chronicité de la maladie dans 35% des cas. Les complications cardiovasculaires retrouvées dans notre série étaient: les accidents vasculaires cérébraux (2%) et l'insuffisance coronarienne (5,6%). Devant l'importance du risque cardiovasculaire au cours du lupus, une surveillance rapprochée des facteurs de risque cardio-vasculaires semble primordiale chez les lupiques. PMID:27022427

Cost-effectiveness analysis of biodegradable polymer versus durable polymer drug-eluting stents incorporating real-world evidence.

PubMed

Teng, Monica; Zhao, Ying Jiao; Khoo, Ai Leng; Ananthakrishna, Rajiv; Yeo, Tiong Cheng; Lim, Boon Peng; Chan, Mark Y; Loh, Joshua P

2018-06-05

Compared with second-generation durable polymer drug-eluting stents (DP-DES), the cost-effectiveness of biodegradable polymer drug-eluting stents (BP-DES) remains unclear in the real-world setting. We assessed the cost-effectiveness of BP-DES in patients with coronary artery disease undergoing percutaneous coronary intervention (PCI). We developed a decision-analytic model to compare the cost-effectiveness of BP-DES to DP-DES over one year and five years from healthcare payer perspective. Relative treatment effects during the first year post-PCI were obtained from a real-world population analysis while clinical event risks in the subsequent four years were derived from a meta-analysis of published studies. At one year, based on the clinical data analysis of 497 propensity-score matched pairs of patients, BP-DES were associated with an incremental cost-effectiveness ratio (ICER) of USD20,503 per quality-adjusted life-year (QALY) gained. At five years, BP-DES yielded an ICER of USD4,062 per QALY gained. At the willingness-to-pay threshold of USD50,400 (one gross domestic product per capita in Singapore in 2015), BP-DES were cost-effective. Sensitivity analysis showed that the cost of stents had a significant impact on the cost-effectiveness of BP-DES. Threshold analysis demonstrated that if the cost difference between BP-DES and DP-DES exceeded USD493, BP-DES would not be cost-effective in patients with one-year of follow-up. BP-DES were cost-effective compared with DP-DES in patients with coronary artery disease at one year and five years after PCI. It is worth noting that the cost of stents had a significant impact on the findings. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Évaluation des caractéristiques mécaniques du polissoir en polyuréthanne utilisé comme porte abrasifs durant le processus du polissage du verre optique

NASA Astrophysics Data System (ADS)

Aliouane, T.; Bouzid, D.; Belkhir, N.; Bouzid, S.; Herold, V.

2005-05-01

La fabrication des composants en verre optique nécessite des moyens de grande précision dans les procédés de finition vue l'importance accordée à leur qualité.
Durant le processus de polissage des verres optiques, le polissoir est un élément clé et a un impact direct sur les performances des composants optiques, non seulement il est utilisé comme support de grains abrasifs mais il doit posséder la fonction de transmission de la pression aux grains. La connaissance de ses propriétés, essentiellement mécanique, est impérative afin d'obtenir un état de surface optimal des composants optiques destinés à remplir des fonctions très précises dans des appareils optiques très performants.
Dans cette étude, nous avons constaté que les propriétés des polissoirs en polyuréthanne tel que la dureté, le module d'élasticité et la densité varient au cours du polissage. Ce changement a des effets sur l'état de surface de verre optique, causé par le changement microstructural de la surface du polissoir (distribution et dimensions des pores) et par conséquent sur la quantité des abrasifs (en oxyde de cérium) insérée dans les pores, ce qui influe sur la quantité de verre enlevée et sur l'état de surface du composant.
Sur la base des résultats obtenus, il a été prouvé que le polissoir subit des modifications très importantes ce qui influe considérablement sur son efficacité de polissage.

Hypermethylation of Homeobox A10 by in Utero Diethylstilbestrol Exposure: An Epigenetic Mechanism for Altered Developmental Programming

PubMed Central

Bromer, Jason G.; Wu, Jie; Zhou, Yuping; Taylor, Hugh S.

2009-01-01

Diethylstilbestrol (DES) is a nonsteroidal estrogen that induces developmental anomalies of the female reproductive tract. The homeobox gene HOXA10 controls uterine organogenesis, and its expression is altered after in utero DES exposure. We hypothesized that an epigenetic mechanism underlies DES-mediated alterations in HOXA10 expression. We analyzed the expression pattern and methylation profile of HOXA10 after DES exposure. Expression of HOXA10 is increased in human endometrial cells after DES exposure, whereas Hoxa10 expression is repressed and shifted caudally from its normal location in mice exposed in utero. Cytosine guanine dinucleotide methylation frequency in the Hoxa10 intron was higher in DES-exposed offspring compared with controls (P = 0.017). The methylation level of Hoxa10 was also higher in the caudal portion of the uterus after DES exposure at the promoter and intron (P < 0.01). These changes were accompanied by increased expression of DNA methyltransferases 1 and 3b. No changes in methylation were observed after in vitro or adult DES exposure. DES has a dual mechanism of action as an endocrine disruptor; DES functions as a classical estrogen and directly stimulates HOXA10 expression with short-term exposure, however, in utero exposure results in hypermethylation of the HOXA10 gene and long-term altered HOXA10 expression. We identify hypermethylation as a novel mechanism of DES-induced altered developmental programming. PMID:19299448

VizieR Online Data Catalog: Australian Dark Energy Survey (OzDES) quasar catalog (Tie+, 2017)

NASA Astrophysics Data System (ADS)

Tie, S. S.; Martini, P.; Mudd, D.; Ostrovski, F.; Reed, S. L.; Lidman, C.; Kochanek, C.; Davis, T. M.; Sharp, R.; Uddin, S.; King, A.; Wester, W.; Tucker, B. E.; Tucker, D. L.; Buckley-Geer, E.; Carollo, D.; Childress, M.; Glazebrook, K.; Hinton, S. R.; Lewis, G.; Macaulay, E.; O'Neill, C. R.; Abbott, T. M. C.; Abdalla, F. B.; Annis, J.; Benoit-Levy, A.; Bertin, E.; Brooks, D.; Carnero Rosell, A.; Carrasco Kind, M.; Carretero, J.; Cunha, C. E.; da Costa, L. N.; Depoy, D. L.; Desai, S.; Doel, P.; Eifler, T. F.; Evrard, A. E.; Finley, D. A.; Flaugher, B.; Fosalba, P.; Frieman, J.; Garcia-Bellido, J.; Gaztanaga, E.; Gerdes, D. W.; Goldstein, D. A.; Gruen, D.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; James, D. J.; Kuehn, K.; Kuropatkin, N.; Lima, M.; Maia, M. A. G.; Marshall, J. L.; Menanteau, F.; Miller, C. J.; Miquel, R.; Nichol, R. C.; Nord, B.; Ogando, R.; Plazas, A. A.; Romer, A. K.; Sanchez, E.; Santiago, B.; Scarpine, V.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thomas, D.; Walker, A. R.; DES Collaboration

2017-07-01

The Australian Dark Energy Survey (OzDES; Yuan et al. 2015MNRAS.452.3047Y) is a spectroscopic survey of the DES supernova fields using the AAOmega spectrograph (Smith et al. 2004SPIE.5492..410S) on the Anglo-Australian Telescope (AAT). The field of view of the AAT multi-object fiber-positioning system (Lewis et al. 2002MNRAS.333..279L) is well matched to DECam, making the AAT a well-suited spectroscopic follow-up instrument for DES. OzDES commenced observations at the same time as DES in 2013B and aims to measure redshifts for thousands of host galaxies of Type Ia supernovae and black hole masses for hundreds of AGNs and quasars (King et al. 2015MNRAS.453.1701K) using reverberation mapping (Blandford & McKee 1982ApJ...255..419B; Peterson 1993PASP..105..247P). The observing targets and results of OzDES observations are compiled into a spectroscopic catalog known as the Global Redshift Catalog (GRC). The GRC is updated after every OzDES observing season. In this work, we used the 2016 February version of the OzDES GRC. Here we present the OzDES Quasar Catalog of 1263 OzDES sources with Mi<-22 mag and i<22 mag that are spectroscopically confirmed quasars. (1 data file).

Les Brulures Electriques par Haut Voltage - A Propos de 10 Cas

PubMed Central

Belmir, R.; Fejjal, N.; El Omari, M.; El Mazouz, S.; Gharib, N.; Abassi, A.; Belmahi, A.

2008-01-01

Summary Les accidents électriques par haute tension (AEHT) provoquent des brûlures profondes par effet Joule le long des axes vasculo-nerveux entre les points d'entrée et de sortie, qui sont le siège de lésions délabrantes. Les Auteurs rapportent une série de dix cas d'AEHT admis au service de chirurgie réparatrice et de brûlés de l'Hôpital Ibn Sina de Rabat à travers laquelle ils étudient les caractéristiques épidémiologiques, cliniques et thérapeutiques. Tous les patients étaient des adultes de sexe masculin dont l'âge moyen était de 31 ans. Dans 70% des cas, ces brûlures étaient secondaires à un contact avec les distributeurs d'électricité avec une surface brûlée inférieure à 20%. Le traitement des lésions électrothermiques a nécessité des interventions itératives avec amputation des segments de membres nécrosés dans 70% des cas, dont les suites étaient marquées par des séquelles fonctionnelles invalidantes. La prévention des AEHT, en particulier pour les accidents du travail au sein des professions exposées, reste fondamentale. PMID:21991124

Detection de la fin de la compaction des anodes par le son

NASA Astrophysics Data System (ADS)

Sanogo, Bazoumana

L'objectif de ce projet etait de developper un outil de controle en temps reel du temps de compaction en se servant du son genere par le vibrocompacteur pendant le formage des anodes crues. Ainsi, une application a ete developpee pour l'analyse des sons enregistres. Des essais ont ete realises avec differents microphones pour une meilleure qualite des mesures et un a ete choisi pour la suite du projet. De meme, differents tests ont ete realises sur des anodes de laboratoire ainsi que des anodes a l'echelle industrielle afin de mettre en place une methode pour la detection du temps optimal necessaire au formage des anodes. Les travaux au laboratoire de carbone a l'Universite du Quebec a Chicoutimi (UQAC) ont consiste a l'enregistrement de son des anodes fabriquees sur place avec differentes configurations; et a la caracterisation de certaines anodes de l'usine. Les anodes fabriquees au laboratoire sont reparties en deux groupes. Le premier regroupe les anodes pour la validation de notre methode. Ce sont des anodes produites avec des temps de compaction differents. Le laboratoire de carbone a l'UQAC est unique et il est possible de produire des anodes avec les memes proprietes que celles des anodes industrielles. Par consequent, la validation initialement prevue a l'usine a ete effectuee avec les anodes de laboratoire. Le deuxieme groupe a servi a etudier les effets des matieres premieres sur le temps de compaction. Le type de coke et le type de brai ont constitue les differentes variations dans ce deuxieme groupe. Quant aux tests et mesures a l'usine, ils ont ete realises en trois campagnes de mesure. La premiere campagne en juin 2014 a servi a standardiser et a trouver le meilleur positionnement des appareils pour les mesures, a regler le logiciel et a faire les premieres mesures. Une deuxieme campagne en mai 2015 a fait l'objet d'enregistrement de son en classant les anodes selon differents temps de compaction. La troisieme et derniere campagne en decembre 2015 a ete le lieu de tests finaux a l'usine en fabriquant des anodes avec differents criteres (variation du temps de compaction, taux de brai, arret manuel du compacteur, variation de la pression des ballons du haut du compacteur). Ces anodes ont ete ensuite analysees au laboratoire a l'UQAC. En parallele a ces travaux precites, l'amelioration de l'application d'analyse du son a ete faite avec le choix des parametres d'analyse et leur standardisation. Les resultats des premiers tests au laboratoire et ceux de la campagne de juin 2014 ont montre que la formation des anodes se fait suivant trois etapes : rearrangement des particules et du brai, compaction et consolidation et enfin la finition. Ces travaux ont montre en outre que le temps de compaction joue un role tres important dans la definition des proprietes finales des anodes. Ainsi, en plus du type de brai, du taux de brai et du type de coke, il faut tenir compte du temps de sur-compaction et de sous-compaction. En effet, ceci a ete demontre a travers les deux validations qui ont ete realisees. Les resultats de la caracterisation des echantillons (venant des anodes de la campagne de decembre 2015) ont montre qu'une anode compactee a un temps optimal acquiert une bonne resistance a la compression et sa resistivite electrique baisse. En outre, on note que le temps de compaction dans notre cas a baisse legerement avec l'augmentation de la pression des ballons de haut du vibrocompacteur. Ce qui a eu pour effet d'augmenter la densite crue de l'anode. Toutefois, il faut s'abstenir de generaliser ce constat car le nombre d'anodes testees est faible dans notre cas. Par ailleurs, cette etude montre que le temps necessaire pour le formage d'une anode croit avec l'augmentation du taux de brai et baisse legerement avec l'augmentation de la pression des ballons. (Abstract shortened by ProQuest.).

Stent Polymers: Do They Make a Difference?

PubMed

Rizas, Konstantinos D; Mehilli, Julinda

2016-06-01

The necessity of polymers on drug-eluting stent (DES) platforms is dictated by the need of an adequate amount and optimal release kinetic of the antiproliferative drugs for achieving ideal DES performance. However, the chronic vessel wall inflammation related to permanent polymer persistence after the drug has been eluted might trigger late restenosis and stent thrombosis. Biodegradable polymers have the potential to avoid these adverse events. A variety of biodegradable polymer DES platforms have been clinically tested, showing equal outcomes with the standard-bearer permanent polymer DES within the first year of implantation. At longer-term follow-up, promising lower rates of stent thrombosis have been observed with the early generation biodegradable polymer DES platforms compared to first-generation DES. Whether this safety benefit still persists with newer biodegradable polymer DES generations against second-generation permanent polymer DES needs to be explored. © 2016 American Heart Association, Inc.

The Dark Energy Survey Image Processing Pipeline

NASA Astrophysics Data System (ADS)

Morganson, E.; Gruendl, R. A.; Menanteau, F.; Carrasco Kind, M.; Chen, Y.-C.; Daues, G.; Drlica-Wagner, A.; Friedel, D. N.; Gower, M.; Johnson, M. W. G.; Johnson, M. D.; Kessler, R.; Paz-Chinchón, F.; Petravick, D.; Pond, C.; Yanny, B.; Allam, S.; Armstrong, R.; Barkhouse, W.; Bechtol, K.; Benoit-Lévy, A.; Bernstein, G. M.; Bertin, E.; Buckley-Geer, E.; Covarrubias, R.; Desai, S.; Diehl, H. T.; Goldstein, D. A.; Gruen, D.; Li, T. S.; Lin, H.; Marriner, J.; Mohr, J. J.; Neilsen, E.; Ngeow, C.-C.; Paech, K.; Rykoff, E. S.; Sako, M.; Sevilla-Noarbe, I.; Sheldon, E.; Sobreira, F.; Tucker, D. L.; Wester, W.; DES Collaboration

2018-07-01

The Dark Energy Survey (DES) is a five-year optical imaging campaign with the goal of understanding the origin of cosmic acceleration. DES performs a ∼5000 deg2 survey of the southern sky in five optical bands (g, r, i, z, Y) to a depth of ∼24th magnitude. Contemporaneously, DES performs a deep, time-domain survey in four optical bands (g, r, i, z) over ∼27 deg2. DES exposures are processed nightly with an evolving data reduction pipeline and evaluated for image quality to determine if they need to be retaken. Difference imaging and transient source detection are also performed in the time domain component nightly. On a bi-annual basis, DES exposures are reprocessed with a refined pipeline and coadded to maximize imaging depth. Here we describe the DES image processing pipeline in support of DES science, as a reference for users of archival DES data, and as a guide for future astronomical surveys.

Les infections à Pseudomonas aeruginosa au service des maladies infectieuses du CHU YO, Burkina Faso: à propos deux cas

PubMed Central

Mamoudou, Savadogo; Lassina, Dao; Fla, Koueta

2015-01-01

Nous rapportons deux cas d'infection à Pseudomonas aeruginosa: un cas de méningite et un cas d'infection urinaire. Les auteurs rappellent qu’à côté des étiologies classiques des méningites et des infections urinaires, des germes résistants comme Pseudomonas aeruginosa peuvent être responsables d'infections à localisation méningées et urinaires et dont il faut connaître pour une bonne prise en charge. Le traitement de ces infections requiert un antibiogramme au regard de la grande capacité de résistance de Pseudomonas aeruginosa en milieu hospitalier. La limitation des gestes invasifs et l'application rigoureuse des mesures de prévention des infections en milieu hospitalier contribueront à lutter efficacement contre ces infections en milieu de soins. PMID:26491521

Exciton Transport and Perfect Coulomb Drag

NASA Astrophysics Data System (ADS)

Nandi, Debaleena

2013-03-01

Exciton condensation is realized in closely-spaced bilayer quantum Hall systems at νT = 1 when the total density in the two 2D electron layers matches the Landau level degeneracy. In this state, electrons in one layer become tightly bound to holes in the other layer, forming a condensate similar to the Cooper pairs in a superconductor. Being charge neutral, these excitons ought to be free to move throughout the bulk of the quantum Hall fluid. One therefore expects that electron current driven in one layer would spontaneously generate a ``hole'' current in the other layer, even in the otherwise insulating bulk of the 2D system. We demonstrate precisely this effect, using a Corbino geometry to defeat edge state transport. Our sample contains two essentially identical two-dimensional electron systems (2DES) in GaAs quantum wells separated by a thin AlGaAs barrier. It is patterned into an annulus with arms protruding from each rim that provide contact to each 2DES separately. A current drag geometry is realized by applying a drive voltage between the outer and inner rim on one 2DES layer while the two rims on the opposite layer are connected together in a closed loop. There is no direct electrical connection between the two layers. At νT = 1 the bulk of the Corbino annulus becomes insulating owing to the quantum Hall gap and net charge transport across the bulk is suppressed. Nevertheless, we find that in the drag geometry appreciable currents do flow in each layer. These currents are almost exactly equal magnitude but, crucially, flow in opposite directions. This phenomenon reflects exciton transport within the νT = 1 condensate, rather than its quasiparticle excitations. We find that quasiparticle transport competes with exciton transport at elevated temperatures, drive levels, and layer separations. This work represents a collaboration with A.D.K. Finck, J.P. Eisenstein, L.N. Pfeiffer and K.W. West. This work is supported by the NSF under grant DMR-1003080.

Determination of LongR3-IGF-I, R3-IGF-I, Des1-3 IGF-I and their metabolites in human plasma samples by means of LC-MS.

PubMed

Thomas, Andreas; Walpurgis, Katja; Delahaut, Philippe; Fichant, Eric; Schänzer, Wilhelm; Thevis, Mario

2017-08-01

According to the regulations of the World Anti-Doping Agency (WADA), growth promoting peptides such as the insulin-like growth factor-I (IGF-I) and its synthetic analogues belong to the class of prohibited compounds. While several assays to quantify endogenous IGF-I have been established, the potential misuse of synthetic analogues such as LongR 3 -IGF-I, R 3 -IGF-I and Des1-3-IGF-I remains a challenge and superior pharmacokinetic properties have been described for these analogues. Within the present study, it was demonstrated that the target peptides can be successfully detected in plasma samples by means of magnetic beads-based immunoaffinity purification and subsequent nanoscale liquid chromatographic separation with high resolution mass spectrometric detection. Noteworthy, the usage of a specific antibody for LongR 3 -IGF-I enables the determination in low ng/mL levels despite the presence of an enormous excess of endogenous human IGF-I. In addition, different metabolism studies (in-vitro and in-vivo) were performed using sophisticated strategies such as incubation with skin tissue microsomes, degradation in biological fluids (for all analogues), and administration to rats (for LongR 3 -IGF-I). Herewith, several C-and N-terminally truncated metabolites were identified and their relevancy was additionally confirmed by in-vivo experiments with rodents. Especially for LongR 3 -IGF-I, a metabolite ((Des1-11)-LongR 3 -IGF-I) was identified that prolonged the detectability in-vivo by a factor of approximately 2. The method was validated for qualitative interpretation considering the parameters specificity, identification capability, recovery (26-60%), limit of detection (0.5ng/mL), imprecision (<25%), linearity, stability, and matrix effects. A stable isotope labelled ( 15 N)-IGF-I was used as internal standard to control all sample preparation steps. Copyright © 2017 Elsevier Ltd. All rights reserved.

Developpements numeriques recents realises en aeroelasticite chez Dassault Aviation pour la conception des avions de combat modernes et des avions d’affaires

DTIC Science & Technology

2003-03-01

combat modernes et des avions d’affaires E. Garrigues, Th. Percheron DASSAULT AVIATION DGT/DTA/IAP F-922 14, Saint-Cloud Cedex France 1. Introduction ...de vol, des acedidrations rigides et des rdponses de la structure ( jauges et acedidrations). Struturl Premdicton Grdjustments n~~~ligh Testsn~n Fig4ure

Etude du processus de changement vecu par des familles ayant decide d'adopter volontairement des comportements d'attenuation des changements climatiques

NASA Astrophysics Data System (ADS)

Leger, Michel T.

Les activites humaines energivores telles l'utilisation intensive de l'automobile, la surconsommation de biens et l'usage excessif d'electricite contribuent aux changements climatiques et autres problemes environnementaux. Bien que plusieurs recherches rapportent que l'etre humain est de plus en plus conscient de ses impacts sur le climat de la planete, ces memes recherches indiquent qu'en general, les gens continuent a se comporter de facon non ecologique. Que ce soit a l'ecole ou dans la communaute, plusieurs chercheurs en education relative a l'environnement estiment qu'une personne bien intentionnee est capable d'adopter des comportements plus respectueux de l'environnement. Le but de cette these etait de comprendre le processus d'integration de comportements d'attenuation des changements climatiques dans des familles. A cette fin, nous nous sommes fixe deux objectifs : 1) decrire les competences et les procedes qui favorisent l'adoption de comportements d'attenuation des changements climatiques dans des familles et 2) decrire les facteurs et les dynamiques familiales qui facilitent et limitent l'adoption de comportements d'attenuation des changements climatiques dans des familles. Des familles ont ete invitees a essayer des comportements personnels et collectifs d'attenuation des changements climatiques de sorte a integrer des modes de vie plus ecologiques. Sur une periode de huit mois, nous avons suivi leur experience de changement afin de mieux comprendre comment se produit le processus de changement dans des familles qui decident volontairement d'adopter des comportements d'attenuation des changements climatiques. Apres leur avoir fourni quelques connaissances de base sur les changements climatiques, nous avons observe le vecu de changement des familles durant huit mois d'essais a l'aide de journaux reflexifs, d'entretiens d'explicitation et du journal du chercheur. La these comporte trois articles scientifiques. Dans le premier article, nous presentons une recension des ecrits sur le changement de comportement en environnement. Nous explorons egalement la famille comme systeme fonctionnel de sorte a mieux comprendre ce contexte d'action environnementale qui est, a notre connaissance, peu etudie. Dans le deuxieme article, nous presentons nos resultats de recherche concernant les facteurs d'influence observes ainsi que les competences manifestees au cours du processus d'adoption de nouveaux comportements environnementaux dans trois familles. Enfin, le troisieme article presente les resultats du cas d'une quatrieme famille ou les membres vivent depuis longtemps des modes de vie ecologique. Dans le cadre d'une demarche d'analyse par theorisation ancree, l'etude de ce cas modele nous a permis d'approfondir les categories conceptuelles identifiees dans le deuxieme article de sorte a produire une modelisation de l'integration de comportements environnementaux dans le contexte de la famille. Les conclusions degagees grace a la recension des ecrits nous ont permis d'identifier les elements qui pourraient influencer l'adoption de comportements environnementaux dans des familles. La recension a aussi permis une meilleure comprehension des divers facteurs qui peuvent affecter l'adoption de comportements environnementaux et, enfin, elle a permis de mieux cerner le phenomene de changement de comportement dans le contexte de la famille consideree comme un systeme. En appliquant un processus d'analyse inductif, a partir de nos donnees qualitatives, les resultats de notre etude multi-cas nous ont indique que deux construits conceptuels semblent influencer l'adoption de comportements environnementaux en famille : 1) les valeurs biospheriques communes au sein de la famille et 2) les competences collectivement mises a profit collectivement durant l'essai de nouveaux comportements environnementaux. Notre modelisation du processus de changement dans des familles indique aussi qu'une dynamique familiale collaborative et la presence d'un groupe de soutien exterieur sont deux elements conceptuels qui tendent a influencer les deux principaux construits et, par ce fait, tendent a augmenter les chances d'integrer de nouveaux comportements environnementaux dans des familles. En conclusion, nous presentons les limites de notre recherche ainsi que des pistes pour des recherches futures. Notamment, nous recommandons que l'ecole accueille les familles des eleves dans le cadre d'activites d'education a l'environnement ou les freres, les soeurs et les parents des eleves puissent apprendre ensemble, a l'ecole. Par exemple, nous recommandons la conduite en ERE d'une recherche action portant sur l'apprentissage intergenerationnel de nouveaux comportements dans le contexte de la famille. Mots-cles : education relative a l'environnement, comportement environnemental en famille, changement de comportement en famille, valeurs biospheriques, competences d'action.

Conception d'un outil d'aide a la decision de technologies de fabrication additive en milieu aeronautique

NASA Astrophysics Data System (ADS)

Buvat, Gael

La fabrication additive offre une opportunite d'amelioration des methodes de productions de pieces. Cependant, les technologies de fabrication additive sont diverses, les fournisseurs de services sont multiples et peu de personnel est forme pour operer sur ces technologies. L'objectif de cette etude est d'emettre une suggestion de concepts d'outils d'aide a la decision de technologies, de materiaux et de post-traitements de fabrication additive en milieu aeronautique. Trois sous-objectifs sont employes. Premierement, la definition des criteres de decision de technologies, de materiaux et de post-traitements de fabrication additive. Ensuite, l'elaboration d'un cahier des charges de l'outil d'aide a la decision en accord avec les besoins industriels du secteur aeronautique. Et enfin, la suggestion de trois concepts d'outils d'aide a la decision et leur evaluation par comparaison au cahier des charges etabli. Les criteres captures aupres de 11 industriels concernent des criteres de couts, de qualite, de conception et de delai d'obtention. Ensuite, nous avons elabore un cahier des charges permettant de reunir les besoins des industriels du secteur aeronautique selon trois axes qui constituent la colonne vertebrale des outils d'aide a la decision : une suggestion d'interface utilisateur, une suggestion de bases de donnees et un moteur de selection des technologies, des materiaux et des post-traitements de fabrication additive. La convivialite de l'interface utilisateur, l'evaluation de la qualite souhaitee par l'utilisateur et la prise en compte des etudes de cas realisees par le moteur de selection sont exemples de besoins que nous avons identifie au sein de cette etude. Nous avons ensuite transcrit ces besoins en specifications techniques pour permettre une evaluation du niveau de satisfaction des industriels au travers d'un pointage des trois concepts suggeres. Ces trois concepts d'outils d'aide a la decision ont ete realises respectivement grâce a Microsoft ExcelRTM, Microsoft AccessRTM ainsi qu'une plateforme en ligne associee a l'outil d'apprentissage statistique RapidMinerRTM. Ce dernier outil en ligne a retenu l'attention des ingenieurs qui l'ont evalue principalement du fait de la prise en compte des etudes de cas dans la suggestion preferentielle de technologies, de materiaux et de post-traitements.

Pratique de l’électroconvulsivothérapie dans un hôpital universitaire Tunisien

PubMed Central

Mechri, Anwar; Zaafrane, Hana; Khalifa, Monia Hadj; Toumi, Samir; Zaafrane, Férid; Gaha, Lotfi

2018-01-01

Les objectifs de cette étude étaient de décrire les modalités pratiques de l’électroconvulsivothérapie (ECT) à l’hôpital universitaire de Monastir (Tunisie). Il s'agit d'une étude rétrospective portant sur tous les patients traités par ECT à l’hôpital universitaire de Monastir entre 2002 et 2013. Le nombre des patients était de 80 patients (60 hommes et 20 femmes, d’âge moyen de 42,1±15,7 ans), représentant 1,4% de l’ensemble des patients hospitalisés en psychiatrie durant la période d’étude. Le nombre total des séances d’ECT était de 784. Le diagnostic principal était le trouble dépressif majeur isolé ou récurrent chez 50% des patients. La majorité des patients (78,8%) avait reçu une seule cure d’ECT avec un nombre moyen de séances de 8,1 ± 4,9. Le produit anesthésique le plus utilisé était le propofol (97,4%). L’énergie délivrée était comprise entre 40 et 80 joules dans 71% des cas et elle était positivement corrélée à l’âge des patients. La durée moyenne de la crise motrice était de 22,3 ± 7,2 secondes et elle était négativement corrélée à l’âge des patients. Le taux de réponse le plus élevé a été constaté au niveau des scores de dépression (64,3%). Des effets indésirables immédiats ont été mentionnés chez 51,2% des patients. Enfin, 20% des patients poursuivaient des séances d’ECT d’entretien avec un rythme uni ou bimensuel. La pratique de l’ECT à l’hôpital universitaire de Monastir reste peu développée en termes de nombre des patients et des séances d’ECT. Des efforts doivent être déployés pour promouvoir l’utilisation de cette méthode. PMID:29632628

Le contrôle des infections au cabinet du pédiatre

PubMed Central

2008-01-01

RÉSUMÉ La transmission des infections au cabinet du pédiatre est de plus en plus préoccupante. Le présent document expose les voies de transmission des infections et les principes sous-jacents aux mesures actuelles pour contrôler les infections. Pour prévenir les infections, il faut bien concevoir le cabinet et adopter des politiques administratives et de triage convenables, de même que des pratiques de base pour les soins de tous les patients (p. ex., hygiène des mains, port de gants, de masques, de lunettes de protection et d’une blouse d’hôpital pour des interventions précises; nettoyage, désinfection et stérilisation convenables des surfaces et du matériel, y compris les jouets, et techniques d’asepsie en cas d’interventions effractives) et des précautions additionnelles en cas d’infections précises. Le personnel doit avoir reçu les vaccins pertinents, et les personnes infectées doivent respecter les politiques de restriction au travail.

Vents stellaires chauds et nébuleuses éjectées des étoiles chaudes: nécessaire inclusion des phénomènes radiatifs dans les simulations hydrodynamiques

NASA Astrophysics Data System (ADS)

Grosdidier, Y.; Garcia-Segura, G.; Acker, A.; Moffat, A. F. J.

Nous décrivons, à l'instar de la formation et de l'évolution des nébuleuses planétaires, comment l'histoire des vents stellaires issus d'une même étoile chaude (massive ou non) détermine la morphologie des nébuleuses éjectées. Ensuite, nous présentons sommairement la structure et la dynamique des vents accélérés radiativement au sein des étoiles massives (O, Wolf-Rayet) et des étoiles centrales de nébuleuses planétaires de type [WC]. Enfin, nous tâchong d'illustrer en quoi la prise en compte des phénomènes radiatifs est nécessaire pour effectuer toute simulation hydrodynamique sensée reproduire les observations dans les deux contextes, i.e. les vents stellaires chauds eux-mêmes, la persistance de surdensités en leur sein, et les nébuleuses éjectées qui en résultent.

La prévention des blessures chez les enfants et les adolescents : une démarche de santé publique

PubMed Central

Yanchar, Natalie L; Warda, Lynne J; Fuselli, Pamela

2012-01-01

RÉSUMÉ La majorité des blessures dont sont victimes les enfants et les adolescents sont évitables. Le présent document de principes contient des renseignements généraux, des conseils et une déclaration d’engagement à l’égard de la prévention des blessures au Canada. Il sert de base sur laquelle construire en s’attardant d’abord aux définitions, à l’étendue et aux priorités en matière de prévention des blessures. Il contient également une description du fardeau et du profil des blessures non intentionnelles, de même que les principes d’interventions de prévention efficaces. La version intégrale renferme une liste de ressources en vue d’obtenir des données et de l’information probante (www.cps.ca). Enfin, le présent document de principes peut être utilisé pour la défense généralisée de la prévention des blessures.

Impact de la preparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses

NASA Astrophysics Data System (ADS)

Amrani, Salah

La fabrication de l'aluminium est realisee dans une cellule d'electrolyse, et cette operation utilise des anodes en carbone. L'evaluation de la qualite de ces anodes reste indispensable avant leur utilisation. La presence des fissures dans les anodes provoque une perturbation du procede l'electrolyse et une diminution de sa performance. Ce projet a ete entrepris pour determiner l'impact des differents parametres de procedes de fabrication des anodes sur la fissuration des anodes denses. Ces parametres incluent ceux de la fabrication des anodes crues, des proprietes des matieres premieres et de la cuisson. Une recherche bibliographique a ete effectuee sur tous les aspects de la fissuration des anodes en carbone pour compiler les travaux anterieurs. Une methodologie detaillee a ete mise au point pour faciliter le deroulement des travaux et atteindre les objectifs vises. La majorite de ce document est reservee pour la discussion des resultats obtenus au laboratoire de l'UQAC et au niveau industriel. Concernant les etudes realisees a l'UQAC, une partie des travaux experimentaux est reservee a la recherche des differents mecanismes de fissuration dans les anodes denses utilisees dans l'industrie d'aluminium. L'approche etait d'abord basee sur la caracterisation qualitative du mecanisme de la fissuration en surface et en profondeur. Puis, une caracterisation quantitative a ete realisee pour la determination de la distribution de la largeur de la fissure sur toute sa longueur, ainsi que le pourcentage de sa surface par rapport a la surface totale de l'echantillon. Cette etude a ete realisee par le biais de la technique d'analyse d'image utilisee pour caracteriser la fissuration d'un echantillon d'anode cuite. L'analyse surfacique et en profondeur de cet echantillon a permis de voir clairement la formation des fissures sur une grande partie de la surface analysee. L'autre partie des travaux est basee sur la caracterisation des defauts dans des echantillons d'anodes crues fabriquees industriellement. Cette technique a consiste a determiner le profil des differentes proprietes physiques. En effet, la methode basee sur la mesure de la distribution de la resistivite electrique sur la totalite de l'echantillon est la technique qui a ete utilisee pour localiser la fissuration et les macro-pores. La microscopie optique et l'analyse d'image ont, quant a elles, permis de caracteriser les zones fissurees tout en determinant la structure des echantillons analyses a l'echelle microscopique. D'autres tests ont ete menes, et ils ont consiste a etudier des echantillons cylindriques d'anodes de 50 mm de diametre et de 130 mm de longueur. Ces derniers ont ete cuits dans un four a UQAC a differents taux de chauffage dans le but de pouvoir determiner l'influence des parametres de cuisson sur la formation de la fissuration dans ce genre de carottes. La caracterisation des echantillons d'anodes cuites a ete faite a l'aide de la microscopie electronique a balayage et de l'ultrason. La derniere partie des travaux realises a l'UQAC contient une etude sur la caracterisation des anodes fabriquees au laboratoire sous differentes conditions d'operation. L'evolution de la qualite de ces anodes a ete faite par l'utilisation de plusieurs techniques. L'evolution de la temperature de refroidissement des anodes crues de laboratoire a ete mesuree; et un modele mathematique a ete developpe et valide avec les donnees experimentales. Cela a pour objectif d'estimer la vitesse de refroidissement ainsi que le stress thermique. Toutes les anodes fabriquees ont ete caracterisees avant la cuisson par la determination de certaines proprietes physiques (resistivite electrique, densite apparente, densite optique et pourcentage de defauts). La tomographie et la distribution de la resistivite electrique, qui sont des techniques non destructives, ont ete employees pour evaluer les defauts internes des anodes. Pendant la cuisson des anodes de laboratoire, l'evolution de la resistivite electrique a ete suivie et l'etape de devolatilisation a ete identifiee. Certaines anodes ont ete cuites a differents taux de chauffage (bas, moyen, eleve et un autre combine) dans l'objectif de trouver les meilleures conditions de cuisson en vue de minimiser la fissuration. D'autres anodes ont ete cuites a differents niveaux de cuisson, cela dans le but d'identifier a quelle etape de l'operation de cuisson la fissuration commence a se developper. Apres la cuisson, les anodes ont ete recuperees pour, a nouveau, faire leur caracterisation par les memes techniques utilisees precedemment. L'objectif principal de cette partie etait de reveler l'impact de differents parametres sur le probleme de fissuration, qui sont repartis sur toute la chaine de production des anodes. Le pourcentage de megots, la quantite de brai et la distribution des particules sont des facteurs importants a considerer pour etudier l'effet de la matiere premiere sur le probleme de la fissuration. Concernant l'effet des parametres du procede de fabrication sur le meme probleme, le temps de vibration, la pression de compaction et le procede de refroidissement ont ete a la base de cette etude. Finalement, l'influence de la phase de cuisson sur l'apparition de la fissuration a ete prise en consideration par l'intermediaire du taux de chauffage et du niveau de cuisson. Les travaux realises au niveau industriel ont ete faits lors d'une campagne de mesure dans le but d'evaluer la qualite des anodes de carbone en general et l'investigation du probleme de fissuration en particulier. Ensuite, il s'agissait de reveler les effets de differents parametres sur le probleme de la fissuration. Vingt-quatre anodes cuites ont ete utilisees. Elles ont ete fabriquees avec differentes matieres premieres (brai, coke, megots) et sous diverses conditions (pression, temps de vibration). Le parametre de la densite de fissuration a ete calcule en se basant sur l'inspection visuelle de la fissuration des carottes. Cela permet de classifier les differentes fissurations en plusieurs categories en se basant sur certains criteres tels que le type de fissures (horizontale, verticale et inclinee), leurs localisations longitudinales (bas, milieu et haut de l'anode) et transversales (gauche, centrale et droite). Les effets de la matiere premiere, les parametres de fabrication des anodes crues ainsi que les conditions de cuisson sur la fissuration ont ete etudies. La fissuration des anodes denses en carbones cause un serieux probleme pour l'industrie d'aluminium primaire. La realisation de ce projet a permis la revelation de differents mecanismes de fissuration, la classification de fissuration par plusieurs criteres (position, types localisation) et l'evaluation de l'impact de differents parametres sur la fissuration. Les etudes effectuees dans le domaine de cuisson ont donne la possibilite d'ameliorer l'operation et reduire la fissuration des anodes. Le travail consiste aussi a identifier des techniques capables d'evaluer la qualite d'anodes (l'ultrason, la tomographie et la distribution de la resistivite electrique). La fissuration des anodes en carbone est consideree comme un probleme complexe, car son apparition depend de plusieurs parametres repartis sur toute la chaine de production. Dans ce projet, plusieurs nouvelles etudes ont ete realisees, et elles permettent de donner de l'originalite aux travaux de recherches faits dans le domaine de la fissuration des anodes de carbone pour l'industrie de l'aluminium primaire. Les etudes realisees dans ce projet permettent d'ajouter d'un cote, une valeur scientifique pour mieux comprendre le probleme de fissuration des anodes et d'un autre cote, d'essayer de proposer des methodes qui peuvent reduire ce probleme a l'echelle industrielle.

β1 subunit stabilises sodium channel Nav1.7 against mechanical stress.

PubMed

Körner, Jannis; Meents, Jannis; Machtens, Jan-Philipp; Lampert, Angelika

2018-06-01

The voltage-gated sodium channel Nav1.7 is a key player in neuronal excitability and pain signalling. In addition to voltage sensing, the channel is also modulated by mechanical stress. Using whole-cell patch-clamp experiments, we discovered that the sodium channel subunit β1 is able to prevent the impact of mechanical stress on Nav1.7. An intramolecular disulfide bond of β1 was identified to be essential for stabilisation of inactivation, but not activation, against mechanical stress using molecular dynamics simulations, homology modelling and site-directed mutagenesis. Our results highlight the role of segment 6 of domain IV in fast inactivation. We present a candidate mechanism for sodium channel stabilisation against mechanical stress, ensuring reliable channel functionality in living systems. Voltage-gated sodium channels are key players in neuronal excitability and pain signalling. Precise gating of these channels is crucial as even small functional alterations can lead to pathological phenotypes such as pain or heart failure. Mechanical stress has been shown to affect sodium channel activation and inactivation. This suggests that stabilising components are necessary to ensure precise channel gating in living organisms. Here, we show that mechanical shear stress affects voltage dependence of activation and fast inactivation of the Nav1.7 channel. Co-expression of the β1 subunit, however, protects both gating modes of Nav1.7 against mechanical shear stress. Using molecular dynamics simulation, homology modelling and site-directed mutagenesis, we identify an intramolecular disulfide bond of β1 (Cys21-Cys43) which is partially involved in this process: the β1-C43A mutant prevents mechanical modulation of voltage dependence of activation, but not of fast inactivation. Our data emphasise the unique role of segment 6 of domain IV for sodium channel fast inactivation and confirm previous reports that the intracellular process of fast inactivation can be modified by interfering with the extracellular end of segment 6 of domain IV. Thus, our data suggest that physiological gating of Nav1.7 may be protected against mechanical stress in a living organism by assembly with the β1 subunit. © 2018 The Authors. The Journal of Physiology © 2018 The Physiological Society.

Anisotropic modulus stabilisation: strings at LHC scales with micron-sized extra dimensions

NASA Astrophysics Data System (ADS)

Cicoli, M.; Burgess, C. P.; Quevedo, F.

2011-10-01

We construct flux-stabilised Type IIB string compactifications whose extra dimensions have very different sizes, and use these to describe several types of vacua with a TeV string scale. Because we can access regimes where two dimensions are hierarchically larger than the other four, we find examples where two dimensions are micron-sized while the other four are at the weak scale in addition to more standard examples with all six extra dimensions equally large. Besides providing ultraviolet completeness, the phenomenology of these models is richer than vanilla large-dimensional models in several generic ways: ( i) they are supersymmetric, with supersymmetry broken at sub-eV scales in the bulk but only nonlinearly realised in the Standard Model sector, leading to no MSSM superpartners for ordinary particles and many more bulk missing-energy channels, as in supersymmetric large extra dimensions (SLED); ( ii) small cycles in the more complicated extra-dimensional geometry allow some KK states to reside at TeV scales even if all six extra dimensions are nominally much larger; ( iii) a rich spectrum of string and KK states at TeV scales; and ( iv) an equally rich spectrum of very light moduli exist having unusually small (but technically natural) masses, with potentially interesting implications for cosmology and astrophysics that nonetheless evade new-force constraints. The hierarchy problem is solved in these models because the extra-dimensional volume is naturally stabilised at exponentially large values: the extra dimensions are Calabi-Yau geometries with a 4D K3 or T 4-fibration over a 2D base, with moduli stabilised within the well-established LARGE-Volume scenario. The new technical step is the use of poly-instanton corrections to the superpotential (which, unlike for simpler models, are likely to be present on K3 or T 4-fibered Calabi-Yau compactifications) to obtain a large hierarchy between the sizes of different dimensions. For several scenarios we identify the low-energy spectrum and briefly discuss some of their astrophysical, cosmological and phenomenological implications.

Stabilisation of spent mushroom substrate for application as a plant growth-promoting organic amendment.

PubMed

Paula, Fabiana S; Tatti, Enrico; Abram, Florence; Wilson, Jude; O'Flaherty, Vincent

2017-07-01

Over three million tonnes of spent mushroom substrate (SMS) are produced in Europe every year as a by-product of the cultivation of Agaricus bisporus. The management of SMS has become an increasing challenge for the mushroom production industry, and finding environmentally and economically sustainable solutions for this organic residue is, therefore, highly desirable. Due to its physical properties and nutrient content, SMS has great potential to be employed in agricultural and horticultural sectors, and further contribute to reduce the use of non-renewable resources, such as peat. However, SMS is often regarded as not being stable and/or mature, which hampers its wide use for crop production. Here, we demonstrate the stabilisation of SMS and its subsequent use as organic fertiliser and partial peat replacement in horticulture. The stabilisation was performed in a laboratory-scale composting system, with controlled temperature and aeration. Physical and chemical parameters were monitored during composting and provided information on the progress of the process. Water soluble carbohydrates (WSC) content was found to be the most reliable parameter to predict SMS stability. In situ oxygen consumption indicated the main composting phases, reflecting major changes in microbial activity. The structure of the bacterial community was also found to be a potential predictor of stability, as the compositional changes followed the composting progress. By contrast, the fungal community did not present clear successional process along the experiment. Maturity and quality of the stabilised SMS were assessed in a horticultural growing trial. When used as the sole fertiliser source, SMS was able to support Lolium multiflorum (Italian ryegrass) growth and significantly improved grass yield with a concentration-dependent response, increasing grass biomass up to 300%, when compared to the untreated control. In summary, the results indicated that the method employed was efficient in generating a stable and mature product, which has a great potential to be applied in horticulture. This study represents a step forward in the management of SMS residue, and also provides an alternative to reduce the use of peat in horticulture, alleviating environmental impacts to peatland ecosystems. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Stabilising Effect of the Anterior Oblique Ligament to Prevent Directional Subluxation at the Trapeziometacarpal Joint of the Thumb: A Biomechanical Cadaveric Study

PubMed Central

McCann, Mark R.; Rust, Philippa A.; Wallace, Robert

2018-01-01

Background: The trapeziometacarpal joint (TMCJ) is inherently unstable, relying on ligament restraint to prevent subluxation. Subluxation of the thumb in a dorsoradial direction is often observed in clinical practice, either after acute ligament injury or more commonly with osteoarthritis (OA). This subluxation follows loss of function of trapeziometacarpal ligaments that stabilise this joint, resisting the deforming force of abductor pollicis longus (APL). The exact ligaments that stabilise and prevent the thumb from the pull of APL causing dorsoradial subluxation remain unknown, although the anterior oblique ligament (AOL) has been implicated. The aim of this study was to measure the direction of subluxation resisted by the AOL. Methods: In this study we used cadaveric limbs and custom made biomechanical testing to measure the influence AOL has in stabilising the thumb against subluxation in three planes: radial, dorsal and dorsoradial. Three fresh frozen hands were dissected to expose the TMCJ, leaving all ligaments, capsule and APL attachment in place. The force required to create a displacement of 5mm between the first metacarpal and the trapezium in these three planes was measured before and after AOL division. Results: The average force to displace in the dorsoradial plane prior to division was 6.68N, and a statistically significant reduction to 1.15N (P<0.001) was found after division of the AOL. A statistically significant increase in force (P<0.001) from 2.89N to 4.04N was seen in the radial plane, while no change was seen dorsally (P=0.98), with average forces of 2.74N and 2.62N found pre and post division. Conclusion: There is clinical significance in reporting quantifiable data in this field, as subluxation of the thumb is often seen with OA. The results of our study provide support for surgical reconstruction of the AOL as the primary surgical stabilizer against dorsoradial subluxation of the thumb. Level of evidence: III PMID:29600262

Simulation-Based Acquisition of the Future Air-Land Combat System (acquisition par la simulation des systemes futurs de combat aeroterresire)

DTIC Science & Technology

2003-11-01

de défense sur des matériels, des hommes et des doctrines préexistants, mais part au contraire d’une analyse des menaces et du... hommes et les doctrines. Comme on le verra ultérieurement, cette nouvelle démarche d’ingénierie du système de défense, qui se veut proactive et non...résolvent sous des contraintes de zéro mort ou tout au moins de pertes minimales, dont l ’« acceptabilité » est essentiellement facteur de

QUELS FUTURS TRAITEMENTS POUR LA DEPENDANCE AU TABAC ET AU CANNABIS?

PubMed Central

LE FOLL, Bernard; JUSTINOVA, Zuzana; TANDA, Gianlugi; GOLDBERG, Steven R.

2009-01-01

RESUME Plus de trois millions de morts sont attribués au tabagisme dans le monde par an, et l’usage de tabac est en progression dans les pays en voie de développement. L’usage de tabac est donc une des rares causes de mortalité qui augmente, avec une prévision de plus de 10 millions de morts par an dans 30–40 ans. Le cannabis ou marijuana est la drogue illicite la plus consommée dans le monde et il n’y a actuellement pas de traitement disponible. Bien que les systèmes dopaminergiques jouent un rôle central dans les effets renforçants des drogues, d’autres systèmes sont impliqués. Nous présentons ici des résultats récents obtenus avec des antagonistes des récepteurs cannabinoides CB1, des récepteurs D3 de la dopamine et des récepteurs opioïdes. Ces antagonistes qui modulent de façon directe ou indirecte la transmission dopaminergique cérébrale représentent des approches prometteuses pour le traitement du tabagisme ou de la dépendance au cannabis. Ces approches sont à valider dans des essais cliniques. PMID:18663981

Neonatal diethylstilbestrol exposure alters the metabolic profile of uterine epithelial cells

PubMed Central

Yin, Yan; Lin, Congxing; Veith, G. Michael; Chen, Hong; Dhandha, Maulik; Ma, Liang

2012-01-01

SUMMARY Developmental exposure to diethylstilbestrol (DES) causes reproductive tract malformations, affects fertility and increases the risk of clear cell carcinoma of the vagina and cervix in humans. Previous studies on a well-established mouse DES model demonstrated that it recapitulates many features of the human syndrome, yet the underlying molecular mechanism is far from clear. Using the neonatal DES mouse model, the present study uses global transcript profiling to systematically explore early gene expression changes in individual epithelial and mesenchymal compartments of the neonatal uterus. Over 900 genes show differential expression upon DES treatment in either one or both tissue layers. Interestingly, multiple components of peroxisome proliferator-activated receptor-γ (PPARγ)-mediated adipogenesis and lipid metabolism, including PPARγ itself, are targets of DES in the neonatal uterus. Transmission electron microscopy and Oil-Red O staining further demonstrate a dramatic increase in lipid deposition in uterine epithelial cells upon DES exposure. Neonatal DES exposure also perturbs glucose homeostasis in the uterine epithelium. Some of these neonatal DES-induced metabolic changes appear to last into adulthood, suggesting a permanent effect of DES on energy metabolism in uterine epithelial cells. This study extends the list of biological processes that can be regulated by estrogen or DES, and provides a novel perspective for endocrine disruptor-induced reproductive abnormalities. PMID:22679223

La santé des Premières nations, des Inuits et des Métis: les facteurs que doivent envisager les leaders en santé canadiens dans la foulée du rapport de la Commission de vérité et réconciliation du Canada.

PubMed

McNally, Mary; Martin, Debbie

2017-03-01

Les peuples des Premières nations, inuits et métis qui habitent au Canada sont aux prises avec de profondes disparités en matière de santé par rapport aux Canadiens non autochtones, et ce, dans presque toutes les mesures liées à la santé et au bien-être. Pour faire progresser les services de santé auprès des peuples autochtones, il faut passer à l'action dans tous les ordres de prestation des soins et des politiques en santé. Il est donc essentiel que les leaders et les prestataires des établissements, des systèmes et des installations de santé du Canada comprennent et prennent en main les déterminants de la santé propres aux peuples autochtones, y compris l'héritage du colonialisme et le racisme ancien et actuel. La Commission de vérité et réconciliation du Canada est le point de départ pour réagir de manière positive aux injustices.

Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

PubMed Central

Kahan, Meldon; Mailis-Gagnon, Angela; Wilson, Lynn; Srivastava, Anita

2011-01-01

Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique des lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse, produites par le National Opioid Use Guideline Group. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale sur l’efficacité et l’innocuité des opioïdes pour la douleur chronique non cancéreuse et ont rédigé une série de recommandations. Un panel de 49 cliniciens experts de toutes les régions du Canada ont passé en revue l’ébauche et ont atteint un consensus sur 24 recommandations. Message principal Il est recommandé de faire un dépistage du risque de dépendance avant de prescrire des opioïdes. On recommande des opioïdes faibles (codéine et tramadol) pour une douleur de légère à modérée qui n’a pas répondu aux traitements de première intention. On peut essayer l’oxycodone, l’hydromorphone et la morphine chez les patients qui n’ont pas eu de soulagement avec des opioïdes plus faibles. Une faible dose initiale et une lente hausse du titrage sont recommandées, ainsi qu’une étroite surveillance du patient qu’on a d’abord renseigné. Les médecins doivent surveiller l’apparition de complications comme l’apnée du sommeil. La dose optimale est celle qui améliore le fonctionnement ou atténue les cotes d’évaluation de la douleur d’au moins 30 %. Pour la grande majorité des patients, la dose optimale sera bien en deçà de l’équivalent de 200 mg de morphine par jour. On recommande le sevrage progressif pour les patients qui n’ont pas répondu à un essai d’opioïdes adéquat. Conclusion Les opioïdes jouent un rôle important dans la prise en charge de la douleur chronique non cancéreuse, mais il faut en prescrire avec prudence pour limiter les dommages potentiels. Les nouvelles lignes directrices canadiennes offrent des conseils dont les médecins avaient grand besoin pour les aider à en arriver à un juste équilibre entre le contrôle optimal de la douleur et la sécurité.

Approches pour la reduction de l'impact de defaut dans le transport d'energie du parc eolien offshore via VSC-HVDC =

NASA Astrophysics Data System (ADS)

Benadja, Mounir

Dans ce travail est presente un systeme de generation d'energie d'un parc eolien offshore et un systeme de transport utilisant les stations VSC-HVDC connectees au reseau principal AC onshore. Trois configurations ont ete etudiees, modelisees et validees par simulation. Dans chacune des configurations, des contributions ameliorant les cotes techniques et economiques sont decrites ci-dessous : La premiere contribution concerne un nouvel algorithme MPPT (Maximum Power Point Tracking) utilise pour l'extraction de la puissance maximale disponible dans les eoliennes des parcs offshores. Cette technique d'extraction du MPPT ameliore le rendement energetique de la chaine de conversion des energies renouvelables notamment l'energie eolienne a petite et a grande echelles (parc eolien offshore) qui constitue un probleme pour les constructeurs qui se trouvent confrontes a developper des dispositifs MPPT simples, moins couteux, robustes, fiables et capable d'obtenir un rendement energetique maximal. La deuxieme contribution concerne la reduction de la taille, du cout et de l'impact des defauts electriques (AC et DC) dans le systeme construit pour transporter l'energie d'un parc eolien offshore (OWF) vers le reseau principal AC onshore via deux stations 3L-NPC VSCHVDC. La solution developpee utilise des observateurs non-lineaires bases sur le filtre de Kalman etendu (EKF). Ce filtre permet d'estimer la vitesse de rotation et la position du rotor de chacune des generatrices du parc eolien offshore et de la tension du bus DC de l'onduleur DC-AC offshore et des deux stations 3L-NPC-VSC-HVDC (offshore et onshore). De plus, ce developpement du filtre de Kalman etendu a permis de reduire l'impact des defauts AC et DC. Deux commandes ont ete utilisees, l'une (commande indirect dans le plan abc) avec EKF integre destinee pour controler le convertisseur DC-AC offshore et l'autre (commande d-q) avec EKF integre pour controler les convertisseurs des deux stations AC-DC et DC-AC tout en tenant compte des entrees de chacune des stations. L'integration des observateurs non-lineaires (EKF) dans le controle des convertisseurs permet de resoudre le probleme des incertitudes de mesure, des incertitudes dans la modelisation, en cas du dysfonctionnement ou de panne des capteurs de mesure ainsi que le probleme de l'impact des defauts (AC et DC) sur la qualite d'energie dans les systemes de transmission. Ces estimations contribuent a rendre le cout global du systeme moins cher et sa taille moins encombrante ainsi que la reduction de l'impact des defauts (AC et DC) sur le systeme. La troisieme contribution concerne la reduction de la taille, du cout et de l'impact des defauts electriques (AC et DC) dans le systeme construit pour transporter l'energie d'un parc eolien offshore (OWF) vers le reseau principal AC onshore via deux stations VSC-HVDC. La solution developpee utilise des observateurs non-lineaires bases sur le filtre de Kalman etendu (EKF). Ce filtre permet d'estimer la vitesse de rotation et la position du rotor de chacune des generatrices du parc eolien et de la tension du bus DC de l'onduleur DC-AC offshore. La contribution porte surtout sur le developpement des deux commandes des deux stations. La premiere, la commande non-lineaire modifiee pour controler le premier convertisseur de la station VSC-HVDC offshore assurant le transfert de la puissance generee par le parc eolien vers la station VSC-HVDC onshore. La deuxieme commande non-lineaire modifiee avec integration de la regulation de la tension du bus DC et de la commande a modele de reference adaptative (MRAC) pour la compensation des surintensites et surtensions durant les defauts AC et DC. On peut constater que lors d'un defaut AC au PCC (Point of Common Coupling) du cote reseau onshore, la profondeur de l'impact du defaut AC sur l'amplitude des courants du reseau principal AC onshore qui etait reduit a 60% par les travaux de recherche (Erlich, Feltes et Shewarega, 2014), comparativement a la nouvelle commande proposee MRAC qui reduit la profondeur de l'impact a 35%. Lors de l'apparition des defauts AC et DC, une reduction de l'impact des defauts sur l'amplitude des courants de reseau AC terrestre et du temps de reponse a ete observee et la stabilite du systeme a ete renforcee par l'utilisation de la commande adaptative basee sur le modele de reference MRAC. La quatrieme contribution concerne une nouvelle commande basee sur le mode de glissement (SM) appliquee pour la station VSC-HVDC qui relie le parc eolien offshore (OWF) au reseau principal AC. Ce parc est compose de dix eoliennes basees sur des generatrices synchrones a aimant permanent (VSWT/PMSGs) connectees en parallele et chacune est controlee par son propre convertisseur DC-DC. Une comparaison des performances entre la commande SM et de la commande non-lineaire avec des controleurs PI pour les deux conditions (presence et absence de defaut DC) a ete analysee et montre la superiorite de la commande par SM. Un prototype du systeme etudie a echelle reduite a ete realise et teste au laboratoire GREPCI en utilisant la carte dSPACE-DS1104 pour la validation experimentale. L'analyse et la simulation des systemes etudies sont developpees sous l'environnement Matlab/Simulink/Simpowersystem. Les resultats obtenus a partir des configurations developpees sont valides par simulation et par experimentation. Les performances sont tres satisfaisantes du point de vue reponse dynamique, reponse en regime permanent, stabilite du systeme et qualite de l'energie.

Pneumomédiastin compliquant une crise d’éclampsie: à propos d'un cas

PubMed Central

Doumiri, Mouhssine; Motiaa, Youssef; Oudghiri, Nezha; Saoud, Anas Tazi

2014-01-01

Le pneumomédiastin associé à l'emphysème sous cutané et le pneumothorax, sont des complications rares de la grossesse et surviennent au cours du travail obstétrical. Nous rapportons l'observation d'une parturiente de 25ans, sans antécédent pathologique particulier, admise pour une crise d’éclampsie à 36 semaines d'aménorrhées avec une mort fœtale et trouble de la conscience. L'examen clinique a montré un emphysème sous cutané étendu du visage jusqu’à l'abdomen sans notion de traumatisme et un score de Glasgow à 10. Après mise en condition, traitement de la crise d’éclampsie, stabilisation de la tension artérielle et retour à l’état de conscience, une TDM cervico-thoraco-abdominale a été demandée et a révélé la présence d'un pneumomédiastin important avec un discret pneumothorax droit postérieur et un pneumopéritoine important qui n'ont pas nécessité de drainage pleural. Deux jours après son admission, la patiente a expulsé un mort-né d'un poids de 1800 grammes avec forceps et sans efforts d'expulsions sous analgésie péridurale. Le contrôle radiologique à une semaine a noté une nette diminution de l'emphysème sous cutané et du pneumomédiastin. La patiente a quitté l'hôpital après dix jours. PMID:25838864

Etude de la formation de resonances electroniques et de leur role dans la fragmentation neutre de molecules d'interet biologique

NASA Astrophysics Data System (ADS)

Lepage, Martin

1998-12-01

Cette these est presentee a la Faculte de medecine de l'Universite de Sherbrooke en vue de l'obtention du grade de Ph.D. en Radiobiologie. Elle contient des resultats experimentaux enregistres avec un spectrometre d'electrons a haute resolution. Ces resultats portent sur la formation de resonances electroniques en phase condensee et de differents canaux pour leur decroissance. En premier lieu, nous presentons des mesures d'excitations vibrationnelles de l'oxygene dilue en matrice d'argon pour des energies des electrons incidents de 1 a 20 eV. Les resultats suggerent que le temps de vie des resonances de l'oxygene est modifie par la densite d'etats d'electrons dans la bande de conduction de l'argon. Nous presentons aussi des spectres de pertes d'energie d'electrons des molecules de tetrahydrofuranne (THF) et d'acetone. Dans les deux cas, la position en energie des pertes associees aux excitations vibrationnelles est en excellent accord avec les resultats trouves dans la litterature. Les fonctions d'excitation de ces modes revelent la presence de plusieurs nouvelles resonances electroniques. Nous comparons les resonances du THF et celles de la molecule de cyclopentane en phase gazeuse. Nous proposons une origine commune aux resonances ce qui implique qu'elles ne sont pas necessairement attribuees a l'excitation des electrons non-apparies de l'oxygene du THF. Nous proposons une nouvelle methode basee sur la spectroscopie par pertes d'energie des electrons pour detecter la production de fragments neutres qui demeurent a l'interieur d'un film mince condense a basse temperature. Cette methode se base sur la detection des excitations electroniques du produit neutre. Nous presentons des resultats de la production de CO dans un film de methanol. Le taux de production de CO en fonction de l'energie incidente des electrons est calibre en termes d'une section efficace totale de diffusion des electrons. Les resultats indiquent une augmentation lineaire du taux de production de CO en fonction de l'epaisseur du film et de la dose d'electrons incidente sur le film. Ces donnees experimentales cadrent dans un modele simple ou un electron cause la fragmentation de la molecule sans reaction avec les molecules avoisinantes. Le mecanisme propose pour la fragmentation unimoleculaire du methanol est la formation de resonances qui decroissent dans un etat electronique excite. Nous suggerons l'action combinee de la presence d'un trou dans une orbitale de coeur du methanol et de la presence de deux electrons dans la premiere orbitale vide pour expliquer la dehydrogenation complete du methanol pour des energies des electrons entre 8 et 18 eV. Pour des energies plus grandes, la fragmentation par l'intermediaire de l'ionisation de la molecule a deja ete suggeree. La methode de detection des etats electroniques offre une alternative a la detection des excitations vibrationnelles puisque les spectres de pertes d'energie des electrons sont congestionnes dans cette region d'energie pour les molecules polyatomiques.

The Dark Energy Survey view of the Sagittarius stream: Discovery of two faint stellar system candidates

DOE PAGES

Luque, E.; Pieres, A.; Santiago, B.; ...

2017-02-17

We report the discovery of two new candidate stellar systems in the constellation of Cetus using the data from the first two years of the Dark Energy Survey (DES). The objects, DES J0111–1341 and DES J0225+0304, are located at a heliocentric distance of ~25 kpc and appear to have old and metal-poor populations. Their distances to the Sagittarius orbital plane, ~1.73 kpc (DES J0111–1341) and ~0.50 kpc (DES J0225+0304), indicate that they are possibly associated with the Sagittarius dwarf stream. The half-light radius (rh ≃ 4.55 pc) and luminosity (MV ≃ +0.3) of DES J0111–1341 are consistent with it beingmore » an ultrafaint stellar cluster, while the half-light radius (rh ≃ 18.55 pc) and luminosity (MV ≃ –1.1) of DES J0225+0304 place it in an ambiguous region of size–luminosity space between stellar clusters and dwarf galaxies. Determinations of the characteristic parameters of the Sagittarius stream, metallicity spread (–2.18 ≲ [Fe/H] ≲ –0.95) and distance gradient (23 kpc ≲ D⊙ ≲ 29 kpc), within the DES footprint in the Southern hemisphere, using the same DES data, also indicate a possible association between these systems. If these objects are confirmed through spectroscopic follow-up to be gravitationally bound systems and to share a Galactic trajectory with the Sagittarius stream, DES J0111–1341 and DES J0225+0304 would be the first ultrafaint stellar systems associated with the Sagittarius stream. Moreover, DES J0225+0304 would also be the first confirmed case of an ultrafaint satellite of a satellite.« less

The Dark Energy Survey view of the Sagittarius stream: discovery of two faint stellar system candidates

NASA Astrophysics Data System (ADS)

Luque, E.; Pieres, A.; Santiago, B.; Yanny, B.; Vivas, A. K.; Queiroz, A.; Drlica-Wagner, A.; Morganson, E.; Balbinot, E.; Marshall, J. L.; Li, T. S.; Neto, A. Fausti; da Costa, L. N.; Maia, M. A. G.; Bechtol, K.; Kim, A. G.; Bernstein, G. M.; Dodelson, S.; Whiteway, L.; Diehl, H. T.; Finley, D. A.; Abbott, T.; Abdalla, F. B.; Allam, S.; Annis, J.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Burke, D. L.; Rosell, A. Carnero; Kind, M. Carrasco; Carretero, J.; Cunha, C. E.; D'Andrea, C. B.; Desai, S.; Doel, P.; Evrard, A. E.; Flaugher, B.; Fosalba, P.; Gerdes, D. W.; Goldstein, D. A.; Gruen, D.; Gruendl, R. A.; Gutierrez, G.; James, D. J.; Kuehn, K.; Kuropatkin, N.; Lahav, O.; Martini, P.; Miquel, R.; Nord, B.; Ogando, R.; Plazas, A. A.; Romer, A. K.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thomas, D.; Walker, A. R.

2017-06-01

We report the discovery of two new candidate stellar systems in the constellation of Cetus using the data from the first two years of the Dark Energy Survey (DES). The objects, DES J0111-1341 and DES J0225+0304, are located at a heliocentric distance of ˜25 kpc and appear to have old and metal-poor populations. Their distances to the Sagittarius orbital plane, ˜1.73 kpc (DES J0111-1341) and ˜0.50 kpc (DES J0225+0304), indicate that they are possibly associated with the Sagittarius dwarf stream. The half-light radius (rh ≃ 4.55 pc) and luminosity (MV ≃ +0.3) of DES J0111-1341 are consistent with it being an ultrafaint stellar cluster, while the half-light radius (rh ≃ 18.55 pc) and luminosity (MV ≃ -1.1) of DES J0225+0304 place it in an ambiguous region of size-luminosity space between stellar clusters and dwarf galaxies. Determinations of the characteristic parameters of the Sagittarius stream, metallicity spread (-2.18 ≲ [Fe/H] ≲ -0.95) and distance gradient (23 kpc ≲ D⊙ ≲ 29 kpc), within the DES footprint in the Southern hemisphere, using the same DES data, also indicate a possible association between these systems. If these objects are confirmed through spectroscopic follow-up to be gravitationally bound systems and to share a Galactic trajectory with the Sagittarius stream, DES J0111-1341 and DES J0225+0304 would be the first ultrafaint stellar systems associated with the Sagittarius stream. Furthermore, DES J0225+0304 would also be the first confirmed case of an ultrafaint satellite of a satellite.

Poumon du puisatier

PubMed Central

Elidrissi, Amal Moustarhfir; Zaghba, Nahid; Benjelloun, Hanane; Yassine, Najiba

2016-01-01

Le puisatier a pour profession le creusement et l'entretien des puits pour fournir de l'eau. Il est au contact de divers minerais, particulièrement la silice, particule qui présente un risque certain de développement des maladies pulmonaires connues sous le nom de silicose. Le but de notre travail est de préciser le profil épidémiologique, clinique, radiologique et évolutif des patients puisatiers silicotiques. C'est une étude rétrospective concernant 54 cas de puisatiers ayant une silicose, colligés au service des maladies respiratoires du CHU Ibn Rochd de Casablanca, de Mars 1997 à Janvier 2016. Tous les malades étaient des puisatiers, de sexe masculin, avec une moyenne d'âge de 50 ans. Le tabagisme était retrouvé dans 36 cas et un antécédent de tuberculose était noté dans huit cas. La radiographie thoracique retrouvait des grandes opacités dans 39 cas, des petites opacités dans 15 cas, et un épaississement des septats dans 11 cas. Ce tableau de silicose s'était compliqué d'une surinfection bactérienne dans 37% des cas, d' un pneumothorax dans 4% des cas et d'une tuberculose dans 20% des cas. La prise en charge thérapeutique était celle des complications. La déclaration de la maladie professionnelle et de l'indemnisation était faite. L'évolution était bonne dans 12 cas, stationnaire dans 17 cas et mauvaise dans 16 cas. La silicose est une pneumoconiose fréquente chez les puisatiers. Elle retentit sur la fonction respiratoire. Nous soulignons l'association fréquente de tuberculose et nous insistons sur la prévention qui reste le meilleur traitement. PMID:28292119

Using XML to encode TMA DES metadata.

PubMed

Lyttleton, Oliver; Wright, Alexander; Treanor, Darren; Lewis, Paul

2011-01-01

The Tissue Microarray Data Exchange Specification (TMA DES) is an XML specification for encoding TMA experiment data. While TMA DES data is encoded in XML, the files that describe its syntax, structure, and semantics are not. The DTD format is used to describe the syntax and structure of TMA DES, and the ISO 11179 format is used to define the semantics of TMA DES. However, XML Schema can be used in place of DTDs, and another XML encoded format, RDF, can be used in place of ISO 11179. Encoding all TMA DES data and metadata in XML would simplify the development and usage of programs which validate and parse TMA DES data. XML Schema has advantages over DTDs such as support for data types, and a more powerful means of specifying constraints on data values. An advantage of RDF encoded in XML over ISO 11179 is that XML defines rules for encoding data, whereas ISO 11179 does not. We created an XML Schema version of the TMA DES DTD. We wrote a program that converted ISO 11179 definitions to RDF encoded in XML, and used it to convert the TMA DES ISO 11179 definitions to RDF. We validated a sample TMA DES XML file that was supplied with the publication that originally specified TMA DES using our XML Schema. We successfully validated the RDF produced by our ISO 11179 converter with the W3C RDF validation service. All TMA DES data could be encoded using XML, which simplifies its processing. XML Schema allows datatypes and valid value ranges to be specified for CDEs, which enables a wider range of error checking to be performed using XML Schemas than could be performed using DTDs.

Using XML to encode TMA DES metadata

PubMed Central

Lyttleton, Oliver; Wright, Alexander; Treanor, Darren; Lewis, Paul

2011-01-01

Background: The Tissue Microarray Data Exchange Specification (TMA DES) is an XML specification for encoding TMA experiment data. While TMA DES data is encoded in XML, the files that describe its syntax, structure, and semantics are not. The DTD format is used to describe the syntax and structure of TMA DES, and the ISO 11179 format is used to define the semantics of TMA DES. However, XML Schema can be used in place of DTDs, and another XML encoded format, RDF, can be used in place of ISO 11179. Encoding all TMA DES data and metadata in XML would simplify the development and usage of programs which validate and parse TMA DES data. XML Schema has advantages over DTDs such as support for data types, and a more powerful means of specifying constraints on data values. An advantage of RDF encoded in XML over ISO 11179 is that XML defines rules for encoding data, whereas ISO 11179 does not. Materials and Methods: We created an XML Schema version of the TMA DES DTD. We wrote a program that converted ISO 11179 definitions to RDF encoded in XML, and used it to convert the TMA DES ISO 11179 definitions to RDF. Results: We validated a sample TMA DES XML file that was supplied with the publication that originally specified TMA DES using our XML Schema. We successfully validated the RDF produced by our ISO 11179 converter with the W3C RDF validation service. Conclusions: All TMA DES data could be encoded using XML, which simplifies its processing. XML Schema allows datatypes and valid value ranges to be specified for CDEs, which enables a wider range of error checking to be performed using XML Schemas than could be performed using DTDs. PMID:21969921

Répercussions psychosociales de la drépanocytose sur les parents d'enfants vivant à Kinshasa, République Démocratique du Congo: une étude qualitative

PubMed Central

Luboya, Evariste; Tshilonda, Jean-Christophe Bukasa; Ekila, Mathilde Bothale; Aloni, Michel Ntetani

2014-01-01

Introduction L'insuffisance des moyens de base pour le dépistage et la prise en charge de la socioculturel Africain. D'où la nécessité de réaliser un travail de mise en sens du vécu et des émotions en vue d'information et de soutien psychologique des familles des drépanocytaires. Cette étude a eu pour objectif d'identifier la nature des répercussions psychosociales de la drépanocytose chez les parents et chez les malades. Méthodes Une approche qualitative a été utilisée. Des entretiens ont été menés auprès des parents et des patients drépanocytaires. Nos résultats ont fait l'objet d'une analyse thématique articulée sur les circonstances de découvertes de la maladie, les répercussions de la maladie et la perception de la prise en charge. Résultats Nos interviews ont montré des répercussions psychosociales importantes chez les parents d'enfants drépanocytaires et de stigmatisation des difficultés d'insertion sociale et scolaire pour les enfants drépanocytaires. Ces derniers sont les grands oubliés des récits de parents. La prise en charge est uniquement médicale avec des ressources très limitées et aucun accompagnement psychologique de la famille n'est assuré. Conclusion La prise en charge de cette maladie nécessite la mise en place d'une politique de prise en charge basée sur une approche globale de la maladie. PMID:25574334

The Dark Energy Survey view of the Sagittarius stream: Discovery of two faint stellar system candidates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luque, E.; Pieres, A.; Santiago, B.

We report the discovery of two new candidate stellar systems in the constellation of Cetus using the data from the first two years of the Dark Energy Survey (DES). The objects, DES J0111–1341 and DES J0225+0304, are located at a heliocentric distance of ~25 kpc and appear to have old and metal-poor populations. Their distances to the Sagittarius orbital plane, ~1.73 kpc (DES J0111–1341) and ~0.50 kpc (DES J0225+0304), indicate that they are possibly associated with the Sagittarius dwarf stream. The half-light radius (rh ≃ 4.55 pc) and luminosity (MV ≃ +0.3) of DES J0111–1341 are consistent with it beingmore » an ultrafaint stellar cluster, while the half-light radius (rh ≃ 18.55 pc) and luminosity (MV ≃ –1.1) of DES J0225+0304 place it in an ambiguous region of size–luminosity space between stellar clusters and dwarf galaxies. Determinations of the characteristic parameters of the Sagittarius stream, metallicity spread (–2.18 ≲ [Fe/H] ≲ –0.95) and distance gradient (23 kpc ≲ D⊙ ≲ 29 kpc), within the DES footprint in the Southern hemisphere, using the same DES data, also indicate a possible association between these systems. If these objects are confirmed through spectroscopic follow-up to be gravitationally bound systems and to share a Galactic trajectory with the Sagittarius stream, DES J0111–1341 and DES J0225+0304 would be the first ultrafaint stellar systems associated with the Sagittarius stream. Moreover, DES J0225+0304 would also be the first confirmed case of an ultrafaint satellite of a satellite.« less

Localization of acyl ghrelin- and des-acyl ghrelin-immunoreactive cells in the rat stomach and their responses to intragastric pH.

PubMed

Mizutani, Makoto; Atsuchi, Kaori; Asakawa, Akihiro; Matsuda, Norifumi; Fujimura, Masaki; Inui, Akio; Kato, Ikuo; Fujimiya, Mineko

2009-11-01

Acyl ghrelin has a 28-amino acid sequence with O-n-octanoyl acid modification at the serine 3 position, whereas des-acyl ghrelin has no octanoyl acid modification. Although these peptides exert different physiological functions, no previous studies have shown the different localization of acyl ghrelin and des-acyl ghrelin in the stomach. Here we have developed an antibody specific for des-acyl ghrelin that does not crossreact with acyl ghrelin. Both acyl ghrelin- and des-acyl ghrelin-immunoreactive cells were distributed in the oxyntic and antral mucosa of the rat stomach, with higher density in the antral mucosa than oxyntic mucosa. Immunofluorescence double staining showed that acyl ghrelin- and des-acyl ghrelin-positive reactions overlapped in closed-type round cells, whereas des-acyl ghrelin-positive reaction was found in open-type cells in which acyl ghrelin was negative. Acyl ghrelin-/des-acyl ghrelin-positive closed-type cells contain obestatin; on the other hand, des-acyl ghrelin-positive open-type cells contain somatostatin. We measured the release of acyl ghrelin and des-acyl ghrelin in vascularly perfused rat stomach by ELISA, and the effects of different intragastric pH levels on the release of each peptide were examined. The release of des-acyl ghrelin from the perfused stomach was greater at pH 2 than at pH 4; however, the release of acyl ghrelin was not affected by intragastric pH. The present study demonstrated the differential localization of acyl ghrelin and des-acyl ghrelin in the rat stomach and their different responses to the intragastric pH.

Defence Output Measures: An Economics Perspective

DTIC Science & Technology

2011-11-01

Des budgets de la comptabilité des intrants, des extrants, de la gestion et des ressources ont été utilisés comme mesures relatives aux résultats...Sa Majesté la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2011 Abstract …….. This Contract Report...présent rapport de contrat examine la mesure des extrants en matière de

Improvement of the knowledge in the historical coastal hazards in Brittany by combining archives and geoindicators

NASA Astrophysics Data System (ADS)

Hénaff, A.; Van Vliet-Lanoë, B.; Le Cornec, E.

2012-04-01

Improvement of the knowledge in the historical coastal hazards in Brittany by combining archives and geoindicators. The management of risks of erosion and flood at the coast requires the acquisition of good knowledge of these hazards. The knowledge of the present and past conditions of occurrence and their favourite location at the coast is of major importance. However, this knowledge is often reduced to the inventory of the most-recent events for which direct observations and measurements are available. To improve the historical knowledge of these hazards in Brittany, two sets of data are collected: all indirect indicators susceptible to record over the historic period the meteorological and sea-surface conditions. The first one consists in a regional inventory of the coastal damages generated by storms since the beginning of the XXth century. This inventory is based on the local record in newspapers, university documents and data of archives; it allows the founding of a geo-referenced database. It permits to follow at a regional scale the evolution in space and time of the distribution of the impacts of storms. The second database consists in a record of the historical evolution of trailing spits, a natural geo-indicator of the mean orientation of waves along the coastline. This evolution is followed in time on satellite images, air photos, historical maps and geological sections. Both databases allow at the regional scale a better insight of the coastal hazards and their natural forcing. L'amélioration de la connaissance des aléas côtiers historiques en Bretagne par l'utilisation conjointe des archives et des géo-indicateurs. La gestion des risques côtiers d'érosion et de submersion nécessite de s'appuyer sur une bonne connaissance des aléas. En particulier, la connaissance des conditions actuelles et passées de leur survenue et de leur localisation préférentielle sur les territoires côtiers est déterminante. Pour autant, elle se limite souvent à l'inventaire des événements les plus récents pour lesquels on dispose d'observations directes et de mesures. Afin d'améliorer la connaissance historique des aléas littoraux sur les rivages de la Bretagne, deux types de données sont collectés. Il s'agit d'indicateurs indirects susceptibles de rendre compte des évolutions spatiales et temporelles des conditions météo-marines sur la période historique. Le premier type consiste en un inventaire des dommages générés par les tempêtes sur les littoraux bretons depuis le début du XXe siècle. Cet inventaire construit à partir du dépouillement des journaux locaux, des documents universitaires et des données d'archives ; il a permis de constituer une base de données géoréférencées. Il permet de suivre les évolutions de la distribution spatiale et temporelle des impacts des tempêtes. Le second type consiste en l'enregistrement par des géo-indicateurs naturels que constituent les accumulations littorales en queues de comète dont l'orientation est déterminée par les directions moyennes des houles parvenant sur les rivages. L'évolution de leurs orientations dans le temps et de, manière indirecte, celle de l'orientations des houles est suivi à l'aide des photographies aériennes ainsi que des cartes actuelles et anciennes. L'utilisation conjointe de ces deux types de données permet d'améliorer les connaissances des aléas et des forçages naturels affectant les littoraux à l'échelle régionale.

Etats excites en couche interne de haut spin de neon hautement ionise

NASA Astrophysics Data System (ADS)

Lapierre, Alain

En plus d'être observés lors de plusieurs phénomènes d'interactions multi- électroniques et multi-atomiques, la description des états excités en couche interne est un test sensible à celle de la corrélation électronique. Suivant une spectroscopie faisceau- lame effectuée antérieurement des régions spectrales de l'ultraviolet et du visible (1800-5300 Å) de néon à 10 MeV, des raies spectrales (d'émission) satellites de celles des transitions hydrogéniques (l = n - 1) et l < n - 1, n = 6 - n' = 7, n = 7 - n' = 8 et n = 8 - n' = 9 du néon lithiumoïde (Ne VIII) sont assignées à l'aide de calculs Hartree-Fock, à des transitions de mêmes nombres quantiques principaux entre des états quadruplet dont le cœur est excité en 1s2s 3S. Quelques raies sont assignées à des transitions entre des niveaux n = 3 pour le Ne VI, VII et IX. Par la suite, les transitions quadruplet, quintuplet et sextuplet n = 2 - n' = 3 et n = 2 - n' = 4 du néon lithiumoïde, bérylliumoïde (Ne VII) et boroïde (Ne VI), respectivement, ont été investiguées par spectroscopie faisceau-lame dans la région spectrale des XUV (60-125 Å). Ces investigations sont supportées par des calculs Hartree-Fock et des régressions linéaires sur les séquences isoélectroniques, effectués en parallèle. Des mesures de la durée de vie moyenne de termes n = 3 ont été réalisées et plusieurs raies sont nouvellement identifiées à des transitions de Ne VI à IX.

Des ballons pour demain

NASA Astrophysics Data System (ADS)

Régipa, R.

A partir d'une théorie sur la détermination des formes et des contraintes globales d'un ballon de révolution, ou s'en rapprochant, une nouvelle famille de ballons a été définie. Les ballons actuels, dits de ``forme naturelle'', sont calculés en général pour une tension circonférencielle nulle. Ainsi, pour une mission donnée, la tension longitudinale et la forme de l'enveloppe sont strictement imposées. Les ballons de la nouvelle génération sont globalement cylindriques et leurs pôles sont réunis par un câble axial, chargé de transmettre une partie des efforts depuis le crochet (pôle inférieur), directement au pôle supérieur. De plus, la zone latérale cylindrique est soumise à un faible champ de tensions circonférencielles. Ainsi, deux paramètres permettent de faire évoluer la distribution des tensions et la forme de l'enveloppe: - la tension du câble de liaison entre pôles (ou la longueur de ce câble) - la tension circonférencielle moyenne désirée (ou le rayon du ballon). On peut donc calculer et réaliser: - soit des ballons de forme adaptée, comme les ballons à fond plat pour le bon fonctionnement des montgolfières infrarouge (projet MIR); - soit des ballons optimisés pour une bonne répartition des contraintes et une meilleure utilisation des matériaux d'enveloppe, pour l'ensemble des programmes stratosphériques. Il s'ensuit une économie sensible des coûts de fabrication, une fiabilité accrue du fonctionnement de ces ballons et une rendement opérationnel bien supérieur, permettant entre autres, d'envisager des vols à très haute altitude en matériaux très légers.

Synthèse bibliographique : micro-texturation et microinjection de thermoplastiques

NASA Astrophysics Data System (ADS)

Vera, Julie; Brulez, Anne-Catherine; Contraires, Elise; Larochette, Mathieu; Valette, Stéphane; Benayoun, Stéphane

2017-12-01

La fonctionnalisation de surface des matériaux et notamment des polymères fait l'objet de recherches intenses dans de nombreux secteurs tels que l'industrie du biomédical ou du transport afin de conférer aux pièces des propriétés spécifiques comme l'antibuée, la réduction du frottement ou le dégivrage… Dans le cas d'une production en grande série de pièces polymères fonctionnalisées, il est préférable, pour des questions de coûts, de générer des textures, au moyen d'une technique de reproduction d'empreinte comme l'injection plastique. Toutefois les fonctions requises nécessitent parfois la reproduction de dimensions microniques voire submicroniques poussant à ses limites la maîtrise du procédé conventionnel, avec les caractéristiques de l'injection de micro-pièces, mais aussi des spécificités propres à la micro-texturation. L'objet de cette revue bibliographique est de couvrir le large spectre des problèmes techniques et scientifiques associés à la micro-texturation des pièces plastiques. Les techniques d'usinage de ces micro-motifs sur les outillages et le rôle des revêtements est particulièrement décrit ainsi que le besoin de mettre en œuvre des approches spécifiques de caractérisation topographique des textures. L'influence des paramètres du procédé d'injection est aussi discutée, soulignant la nécessité d'appréhender la micro-texturation des pièces plastiques avec une nouvelle grille de lecture de la microinjection.

Contribution a la comprehension de la durabilite a l'ecaillage des betons contenant de la cendre volante et du laitier

NASA Astrophysics Data System (ADS)

Houehanou, Ernesto C.

L'incorporation des ajouts cimentaires dans le beton est connue pour ses avantages technologiques et environnementaux. Pour assurer une plus grande utilisation des ajouts cimentaires, il faut accroitre la connaissance dans ce domaine surtout les facteurs relatifs a la durabilite des ouvrages construits avec les betons contenant des ajouts mineraux. Jusqu'a present, la plupart des etudes sur les betons contenant de la cendre volante et du laitier semble s'accorder sur leur moins bonne durabilite a l'ecaillage surtout lorsqu'on les compare au beton ordinaire. Les raisons de cette moins bonne performance ne sont pas toutes connues et cela limite bien des fois l'incorporation de la cendre volante et de laitier dans le beton pour des ouvrages fortement exposes aux cycles de gel-degel en presence de sels fondants. Cette these vise la comprehension des problematiques de la durabilite a l'ecaillage des betons contenant des ajouts cimentaires tels la cendre volante et le laitier. Les objectifs sont de mieux comprendre la representativite et la severite relative des essais normalises ASTM C672 et NQ 2621-900 pour l'evaluation de la durabilite a l'ecaillage de ces betons, d'etudier l'influence de la methode de murissement sur la durabilite a l'ecaillage et d'etudier la relation entre la durabilite a l'ecaillage et la sorptivite des surfaces de beton ainsi que la particularite de la microstructure des betons contenant de la cendre volante. Cinq types de betons a air entraine contenant 25% et 35% de cendre volante et laitier ainsi que 1% et 2% de fumee de silice ont ete produits, muris selon differentes methodes et soumis a des essais acceleres selon les deux procedures normalisees ainsi qu'un essai de sorptivite. Les differentes methodes de murissement sont choisies de facon a mettre en evidence aussi bien l'influence des parametres des essais que celle de la methode de murissement elle-meme. La durabilite en laboratoire des betons testes a ete comparee avec celle de betons similaires apres 4 et 6 annees de service. La microstructure des betons en service a ete analysee au moyen du microscope a balayage electronique (MEB). Les resultats montrent que la qualite du murissement influence grandement la durabilite a l'ecaillage des betons contenant de la cendre volante et de laitier surtout lorsqu'ils sont soumis ' aux essais acceleres en laboratoire. La duree du pretraitement humide est un parametre cle de la durabilite a l'ecaillage des betons testes en laboratoire. Le pretraitement humide correspond a la duree totale du murissement humide (100% HR) et de la periode de presaturation. Pour les deux methodes d'essai, l'allongement du pretraitement humide a 28 jours ameliore la resistance a l'ecaillage de tous les types de betons et en particulier celle des betons avec cendres volantes. Pour les deux methodes d'essai, l'allongement du pretraitement humide a 28 jours ameliore la resistance a l'ecaillage de tous les types de betons et en particulier celle des betons avec cendres volantes. La periode de presaturation de 7 jours de la procedure NQ 2621-900 a un effet similaire a celui d'un murissement humide de meme longueur. Un murissement humide de 28 jours apparait optimal et conduit a une estimation plus realiste de la resistance a l'ecaillage reelle des betons. Pour une meme duree de pretraitement humide, les procedures NQ 2621-900 et ASTM C672 donnent des resultats equivalents. L'utilisation d'un moule a fond drainant n'a pas d'effet sur la resistance a l'ecaillage des betons de cette etude. Bien que le murissement dans l'eau saturee de chaux offre toute l'eau requise pour favoriser le developpement des proprietes du beton et l'amelioration de sa durabilite a l'ecaillage, elle lessive cependant les ions alcalins ce qui diminue defavorablement l'alcalinite et le pH de la solution interstitielle de la pate de ciment pres de la surface exposee. L'utilisation d'un agent de murissement protege mieux les betons contenant de la cendre volante et ameliore significativement leurs resistances a l'ecaillage mais elle a tendance a reduire la durabilite a l'ecaillage des betons contenant de laitier. Pour developper une bonne resistance a l'ecaillage, il est essentiel de produire une surface de beton impermeable qui resiste a la penetration de l'eau externe. La permeabilite et la porosite de la peau du beton sont etroitement liees a la sorptivite. L' allongement de la duree de murissement humide des betons avec ajouts cimentaires diminue systematiquement la sorptivite et ameliore leur durabilite a l'ecaillage, particulierement dans le cas des betons avec cendres volantes. Les resultats montrent qu'il existe une bonne correlation entre les resultats des essais d'ecaillage et les mesures de sorptivite. La correlation etablie entre la sorptivite et la durabilite a l'ecaillage des betons, l'effet • determinant de la carbonatation sur la durabilite a l'ecaillage des betons avec cendres volantes ainsi que l'explication de l'origine de la difference de severite entre les essais ASTM C-672 et NQ 2621-900 sont les contributions scientifiques de cette these. Au plan technique et industriel, elle met en evidence le mode de murissement qui favorise une meilleure durabilite a l'ecaillage des betons et suggere une methode de caracterisation en laboratoire qui ferait une meilleure prediction du comportement en service. Mots cles : Beton, cendre volante, laitier, durabilite, ecaillage, murissement, sorptivite

The Dark Energy Survey Image Processing Pipeline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morganson, E.; et al.

The Dark Energy Survey (DES) is a five-year optical imaging campaign with the goal of understanding the origin of cosmic acceleration. DES performs a 5000 square degree survey of the southern sky in five optical bands (g,r,i,z,Y) to a depth of ~24th magnitude. Contemporaneously, DES performs a deep, time-domain survey in four optical bands (g,r,i,z) over 27 square degrees. DES exposures are processed nightly with an evolving data reduction pipeline and evaluated for image quality to determine if they need to be retaken. Difference imaging and transient source detection are also performed in the time domain component nightly. On amore » bi-annual basis, DES exposures are reprocessed with a refined pipeline and coadded to maximize imaging depth. Here we describe the DES image processing pipeline in support of DES science, as a reference for users of archival DES data, and as a guide for future astronomical surveys.« less

ÉVALUER UNE INTERVENTION COMPLEXE: ENJEUX CONCEPTUELS, MÉTHODOLOGIQUES, ET OPÉRATIONNELS

PubMed Central

Contandriopoulos, André-Pierre; Rey, Lynda; Brousselle, Astrid; Champagne, François

2016-01-01

L’évaluation doit théoriquement aider les décideurs à relever les défis des systèmes de santé contemporains. Paradoxalement, malgré le développement rapide du domaine, l’utilisation des résultats des évaluations par ces décideurs reste faible. Le degré d’utilisation ne dépendrait-il pas de la capacité de l’évaluateur à rendre compte de la complexité des systèmes de santé? La nature complexe d’une intervention amène souvent les évaluateurs à adopter des approches non conventionnelles tenant compte du jeu des acteurs. L’évaluation d’une intervention complexe soulève des enjeux conceptuels, méthodologiques, et opérationnels que doit surmonter l’évaluateur pour accroître le degré d’utilisation des résultats par les décideurs. PMID:27293310

Discovery of the Lensed Quasar System DES J0408-5354

DOE PAGES

Lin, H.; Buckley-Geer, E.; Agnello, A.; ...

2017-03-27

We report the discovery and spectroscopic confirmation of the quad-like lensed quasar system DES J0408-5354 found in the Dark Energy Survey (DES) Year 1 (Y1) data. This system was discovered during a search for DES Y1 strong lensing systems using a method that identified candidates as red galaxies with multiple blue neighbors. DES J0408-5354 consists of a central red galaxy surrounded by three bright (more » $$i\\lt 20$$) blue objects and a fourth red object. Subsequent spectroscopic observations using the Gemini South telescope confirmed that the three blue objects are indeed the lensed images of a quasar with redshift z = 2.375, and that the central red object is an early-type lensing galaxy with redshift z = 0.597. DES J0408-5354 is the first quad lensed quasar system to be found in DES and begins to demonstrate the potential of DES to discover and dramatically increase the sample size of these very rare objects.« less

Discovery of the Lensed Quasar System DES J0408-5354

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, H.; Buckley-Geer, E.; Agnello, A.

We report the discovery and spectroscopic confirmation of the quad-like lensed quasar system DES J0408-5354 found in the Dark Energy Survey (DES) Year 1 (Y1) data. This system was discovered during a search for DES Y1 strong lensing systems using a method that identified candidates as red galaxies with multiple blue neighbors. DES J0408-5354 consists of a central red galaxy surrounded by three bright (more » $$i\\lt 20$$) blue objects and a fourth red object. Subsequent spectroscopic observations using the Gemini South telescope confirmed that the three blue objects are indeed the lensed images of a quasar with redshift z = 2.375, and that the central red object is an early-type lensing galaxy with redshift z = 0.597. DES J0408-5354 is the first quad lensed quasar system to be found in DES and begins to demonstrate the potential of DES to discover and dramatically increase the sample size of these very rare objects.« less

DES Science Portal: II- Creating Science-Ready Catalogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fausti Neto, Angelo; et al.

We present a novel approach for creating science-ready catalogs through a software infrastructure developed for the Dark Energy Survey (DES). We integrate the data products released by the DES Data Management and additional products created by the DES collaboration in an environment known as DES Science Portal. Each step involved in the creation of a science-ready catalog is recorded in a relational database and can be recovered at any time. We describe how the DES Science Portal automates the creation and characterization of lightweight catalogs for DES Year 1 Annual Release, and show its flexibility in creating multiple catalogs withmore » different inputs and configurations. Finally, we discuss the advantages of this infrastructure for large surveys such as DES and the Large Synoptic Survey Telescope. The capability of creating science-ready catalogs efficiently and with full control of the inputs and configurations used is an important asset for supporting science analysis using data from large astronomical surveys.« less

Vecteurs Singuliers des Theories des Champs Conformes Minimales

NASA Astrophysics Data System (ADS)

Benoit, Louis

En 1984 Belavin, Polyakov et Zamolodchikov revolutionnent la theorie des champs en explicitant une nouvelle gamme de theories, les theories quantiques des champs bidimensionnelles invariantes sous les transformations conformes. L'algebre des transformations conformes de l'espace-temps presente une caracteristique remarquable: en deux dimensions elle possede un nombre infini de generateurs. Cette propriete impose de telles conditions aux fonctions de correlations qu'il est possible de les evaluer sans aucune approximation. Les champs des theories conformes appartiennent a des representations de plus haut poids de l'algebre de Virasoro, une extension centrale de l'algebre conforme du plan. Ces representations sont etiquetees par h, le poids conforme de leur vecteur de plus haut poids, et par la charge centrale c, le facteur de l'extension centrale, commune a toutes les representations d'une meme theorie. Les theories conformes minimales sont constituees d'un nombre fini de representations. Parmi celles-ci se trouvent des theories unitaires dont les representation forment la serie discrete de l'algebre de Virasoro; leur poids h a la forme h_{p,q}(m)=[ (p(m+1) -qm)^2-1] (4m(m+1)), ou p,q et m sont des entiers positifs et p+q<= m+1. L'entier m parametrise la charge centrale: c(m)=1 -{6over m(m+1)} avec n>= 2. Ces representations possedent un sous-espace invariant engendre par deux sous-representations avec h_1=h_{p,q} + pq et h_2=h_{p,q} + (m-p)(m+1-q) dont chacun des vecteurs de plus haut poids portent le nom de vecteur singulier et sont notes respectivement |Psi _{p,q}> et |Psi_{m-p,m+1-q}>. . Les theories super-conformes sont une version super-symetrique des theories conformes. Leurs champs appartiennent a des representation de plus haut poids de l'algebre de Neveu-Schwarz, une des deux extensions super -symetriques de l'algebre de Virasoro. Les theories super -conformes minimales possedent la meme structure que les theories conformes minimales. Les representations sont elements de la serie h_{p,q}= [ (p(m+2)-qm)^2-4] /(8m(m+2)) ou p,q et m sont des entiers positifs, p et q etant de meme parite, et p+q<= m+2. La charge centrale est donnee par c(m)={3over 2}-{12over m(m+2)} avec m >= 2. Les vecteurs singuliers | Psi_{p,q}> et |Psi_{m-p,m+2-q} > sont respectivement de poids h _{p,q}+pq/2 et h_ {p,q}+(m-p)(m+2-q)/2.. Les vecteurs singuliers ont une norme nulle et on doit les eliminer des representations pour que celles -ci soient unitaires. Cette elimination engendrent des equations (super-)differentielles qui dependent directement de la forme explicite des vecteurs singuliers et auxquelles doivent obeir les fonctions de correlations de la theorie. Ainsi la connaissance de ces vecteurs singuliers est intimement reliee au calcul des fonctions de correlation. Les equations definissant les vecteurs singuliers forment un systeme lineaire surdetermine dont le nombre d'equations est de l'ordre de N(pq), le nombre de partitions de l'entier pq. Puisque les vecteurs singuliers jouent un role capital en theorie conforme, il est naturel de chercher des formes explicites pour les vecteurs (ou pour des familles infinies de ceux -ci). Nous donnons ici la forme explicite pour la famille infinie de vecteurs singuliers ayant un de ses indices egal a 1, pour les algebres de Virasoro et de Neveu-Schwarz. Depuis ces decouvertes, d'autres techniques de construction des vecteurs singuliers ont ete developpees, dont celle de Bauer, Di Francesco, Itzykson et Zuber pour l'algebre de Virasoro qui reproduit directement l'expression explicite des vecteurs singuliers |Psi _{1,q}> et |Psi_{p,1}>. Ils ont utilise l'algebre des produits d'operateurs et la fusion entre representations irreductibles pour engendrer des relations de recurence produisant les vecteurs singuliers. Dans le dernier chapitre de cette these nous adaptons cet algorithme a la construction des vecteurs singuliers de l'algebre de Neveu-Schwarz.

Comparison between Exclusive and Selective Drug-Eluting Stent Strategies in Treating Patients with Multivessel Coronary Artery Disease.

PubMed

Tung, Ying-Chang; Hsiao, Ping-Gune; Hsu, Lung-An; Kuo, Chi-Tai; Chang, Chi-Jen

2014-05-01

The expanded usage of drug-eluting stents (DES) in treating patients with multivessel coronary artery disease (CAD) may sometimes be limited in real-world practice due to cost concerns. We compared the clinical outcomes of exclusive and selective DES use in treating patients with multivessel CAD. From November 2004 to December 2011, 110 patients with multivessel CAD who received four or more stents were enrolled into this study, and divided into two groups according to the DES strategy employed: exclusive DES (n = 52), or selective DES (n = 58). In the selective DES group, DES was reserved for complex lesions only, such that the incidence and predictors of clinical events were assessed. At a mean follow-up of 41.4 ± 26.5 months, there were no significant differences between the two strategies in terms of baseline characteristics, all-cause mortality (exclusive vs. selective: 1.9% vs. 6.9%, p = 0.21), cardiac death (1.9% vs. 1.7%, p = 0.94) and nonfatal myocardial infarction (3.8% vs. 5.2%, p = 0.74). Despite the presence of more ostial lesions in the exclusive DES group, there was a trend such that major adverse cardiac events (MACE) and target lesion revascularization (TLR) rates were higher in the selective DES group (MACE: 17.3% vs. 31%, p = 0.16; TLR: 11.5% vs. 24.1%, p = 0.08). The higher MACE rate in the selective DES group was mainly driven by a higher target vessel revascularization (TVR) rate (15.4% vs. 29.3%, p = 0.08). In the exclusive DES group, SYNTAX score was an independent predictor of MACE [Haxard ratio (HR): 1.09, 95% confidence internal (CI): 1.02-1.16, p = 0.01] and TVR (HR 1.08, 95% CI 1.01-1.15, p = 0.04). Compared to the exclusive DES strategy, the selective DES strategy with reservation of DES for complex lesions is associated with numerically higher, but not statistically significant, rates of MACE and all-cause mortality in this small group of patients with multivessel CAD receiving four or more stents. Bare metal stent; Drug-eluting stent; Multivessel coronary artery disease.

Comparison between Exclusive and Selective Drug-Eluting Stent Strategies in Treating Patients with Multivessel Coronary Artery Disease

PubMed Central

Tung, Ying-Chang; Hsiao, Ping-Gune; Hsu, Lung-An; Kuo, Chi-Tai; Chang, Chi-Jen

2014-01-01

Background The expanded usage of drug-eluting stents (DES) in treating patients with multivessel coronary artery disease (CAD) may sometimes be limited in real-world practice due to cost concerns. We compared the clinical outcomes of exclusive and selective DES use in treating patients with multivessel CAD. Methods From November 2004 to December 2011, 110 patients with multivessel CAD who received four or more stents were enrolled into this study, and divided into two groups according to the DES strategy employed: exclusive DES (n = 52), or selective DES (n = 58). In the selective DES group, DES was reserved for complex lesions only, such that the incidence and predictors of clinical events were assessed. Results At a mean follow-up of 41.4 ± 26.5 months, there were no significant differences between the two strategies in terms of baseline characteristics, all-cause mortality (exclusive vs. selective: 1.9% vs. 6.9%, p = 0.21), cardiac death (1.9% vs. 1.7%, p = 0.94) and nonfatal myocardial infarction (3.8% vs. 5.2%, p = 0.74). Despite the presence of more ostial lesions in the exclusive DES group, there was a trend such that major adverse cardiac events (MACE) and target lesion revascularization (TLR) rates were higher in the selective DES group (MACE: 17.3% vs. 31%, p = 0.16; TLR: 11.5% vs. 24.1%, p = 0.08). The higher MACE rate in the selective DES group was mainly driven by a higher target vessel revascularization (TVR) rate (15.4% vs. 29.3%, p = 0.08). In the exclusive DES group, SYNTAX score was an independent predictor of MACE [Haxard ratio (HR): 1.09, 95% confidence internal (CI): 1.02-1.16, p = 0.01] and TVR (HR 1.08, 95% CI 1.01-1.15, p = 0.04). Conclusions Compared to the exclusive DES strategy, the selective DES strategy with reservation of DES for complex lesions is associated with numerically higher, but not statistically significant, rates of MACE and all-cause mortality in this small group of patients with multivessel CAD receiving four or more stents. PMID:27122787

Le groupe de recherches transfusionnelles d’Afrique francophone: bilan des cinq premières années

PubMed Central

Tagny, Claude Tayou; Murphy, Edward L.; Lefrère, Jean-Jacques

2016-01-01

Les travaux de recherches sur la sécurité transfusionnelle en Afrique sub-saharienne sont peu nombreux, souvent limités à des initiatives locales avec des conclusions difficilement représentatives de cette région. Le Groupe de recherches transfusionnelles en Afrique sub-saharienne francophone a été créé en mai 2007 avec pour objectif de développer des stratégies globales d’amélioration de la sécurité transfusionnelle mais adaptables à la situation de chaque pays. Les activités du Groupe à ce jour ont porté essentiellement sur l’obtention de données épidémiologiques et de laboratoire sur la transfusion sanguine et à proposer des stratégies de sécurité transfusionnelle dans le domaine des infections transmissibles par la transfusion. Pour mener à bien ces activités de recherche, le Groupe travaille en étroite collaboration avec les Centres nationaux de transfusion sanguine (CNTS), les Centres régionaux de transfusion sanguine (CRTS), les banques de sang hospitalières (BSH) et les postes de collecte de sang. Pour les 5 premières années, quatre priorités de recherche ont été identifiées: (i) des études descriptives sur les caractéristiques des donneurs de sang et des centres de transfusion; (ii) une estimation du risque résiduel post-transfusionnel des principales infections virales transmissibles par la transfusion; (iii) une analyse des stratégies de sélection médicale des donneurs de sang; et (iv) une description des stratégies de dépistage des ITT et une description du système d’assurance qualité externe existant. Durant cette période, sept projets ont été mis en œuvre au niveau national et publiés et cinq études multicentriques ont été réalisées et publiées. La présente étude rapporte les principales observations et recommandations de ces études. PMID:24360798

Identification des parametres du moteur de l'avion Cessna Citation X pour la phase de croisiere a partir des tests en vol et a base des reseaux de neurones =

NASA Astrophysics Data System (ADS)

Zaag, Mahdi

La disponibilite des modeles precis des avions est parmi les elements cles permettant d'assurer leurs ameliorations. Ces modeles servent a ameliorer les commandes de vol et de concevoir de nouveaux systemes aerodynamiques pour la conception des ailes deformables des avions. Ce projet consiste a concevoir un systeme d'identification de certains parametres du modele du moteur de l'avion d'affaires americain Cessna Citation X pour la phase de croisiere a partir des essais en vol. Ces essais ont ete effectues sur le simulateur de vol concu et fabrique par CAE Inc. qui possede le niveau D de la dynamique de vol. En effet, le niveau D est le plus haut niveau de precision donne par l'autorite federale de reglementation FAA de l'aviation civile aux Etats-Unis. Une methodologie basee sur les reseaux de neurones optimises a l'aide d'un algorithme intitule le "grand deluge etendu" est utilisee dans la conception de ce systeme d'identification. Plusieurs tests de vol pour differentes altitudes et differents nombres de Mach ont ete realises afin de s'en servir comme bases de donnees pour l'apprentissage des reseaux de neurones. La validation de ce modele a ete realisee a l'aide des donnees du simulateur. Malgre la nonlinearite et la complexite du systeme, les parametres du moteur ont ete tres bien predits pour une enveloppe de vol determinee. Ce modele estime pourrait etre utilise pour des analyses de fonctionnement du moteur et pourrait assurer le controle de l'avion pendant cette phase de croisiere. L'identification des parametres du moteur pourrait etre realisee aussi pour les autres phases de montee et de descente afin d'obtenir son modele complet pour toute l'enveloppe du vol de l'avion Cessna Citation X (montee, croisiere, descente). Cette methode employee dans ce travail pourrait aussi etre efficace pour realiser un modele pour l'identification des coefficients aerodynamiques du meme avion a partir toujours des essais en vol. None None None

PubMed

Guillaumet, Jean-Louis; Betsch, Jean-Marie; Callmander, Martin W

2008-01-01

Le programme intitulé « Étude des écosystémes montagnards dans la région malgache» (RCP 225/CNRS; responsable: Recteur Renaud Paulian) avait pour ambition de dégager leurs caractères généraux, l'origine des éléments constitutifs et de tester la validité d'un Domaine malgache des Hautes Montagnes proposé par Humbert dès 1951. De 1970 à 1973, trois campagnes (Andringitra; Chaînes anosyennes et Ankaratra; Itremo, Ibity et Marojejy) ont permis une caractérisation écologique des milieux particuliers ainsi que des analyses de systématique sur certains taxa connus pour leur intérêt biogéographique. La succession altitudinale des formations végétales, définies par des critères physionomiques et structuraux, est précisée par massif. Le dernier étage caractérisé par le fourré éricoïde et ses groupements associés ne correspond pas à l'Étage des Hautes Montagnes de l'Est africain. Des groupes de la faune (invertébrés hexapodes: Collemboles et Dermaptères) indiquent une disjonction entre les massifs du Nord (Tsaratanana, Marojejy), ceux du Centre et du Sud; des éléments de la flore (Pandanaceae, Araliaceae, Asteraceae) sont en cours d'analyse dans le même sens. Le Domaine des Hautes montagnes à Madagascar est une réalité écologique mais ne peut être défini floristiquement; chaque massif montagneux est une entité phytogéographique d'étages de végétation interdépendants inclus dans les différents Sous-Domaines du Centre. Les groupes peu mobiles de la faune indiquent globalement une dépendance trophique et bioclimatique (effet tampon du climat intraforestier) vis-à-vis des étages de végétation, mais peuvent réagir à des microclimats locaux par des décalages à leurs limites.

Renaud Paulian et le programme du CNRS sur les hautes montagnes à Madagascar: étage vs domaine

PubMed Central

Guillaumet, Jean-Louis; Betsch, Jean-Marie; Callmander, Martin W.

2011-01-01

Résumé Le programme intitulé « Étude des écosystémes montagnards dans la région malgache» (RCP 225/CNRS; responsable: Recteur Renaud Paulian) avait pour ambition de dégager leurs caractères généraux, l'origine des éléments constitutifs et de tester la validité d'un Domaine malgache des Hautes Montagnes proposé par Humbert dès 1951. De 1970 à 1973, trois campagnes (Andringitra; Chaînes anosyennes et Ankaratra; Itremo, Ibity et Marojejy) ont permis une caractérisation écologique des milieux particuliers ainsi que des analyses de systématique sur certains taxa connus pour leur intérêt biogéographique. La succession altitudinale des formations végétales, définies par des critères physionomiques et structuraux, est précisée par massif. Le dernier étage caractérisé par le fourré éricoïde et ses groupements associés ne correspond pas à l'Étage des Hautes Montagnes de l'Est africain. Des groupes de la faune (invertébrés hexapodes: Collemboles et Dermaptères) indiquent une disjonction entre les massifs du Nord (Tsaratanana, Marojejy), ceux du Centre et du Sud; des éléments de la flore (Pandanaceae, Araliaceae, Asteraceae) sont en cours d'analyse dans le même sens. Le Domaine des Hautes montagnes à Madagascar est une réalité écologique mais ne peut être défini floristiquement; chaque massif montagneux est une entité phytogéographique d'étages de végétation interdépendants inclus dans les différents Sous-Domaines du Centre. Les groupes peu mobiles de la faune indiquent globalement une dépendance trophique et bioclimatique (effet tampon du climat intraforestier) vis-à-vis des étages de végétation, mais peuvent réagir à des microclimats locaux par des décalages à leurs limites. PMID:21731422

Stabilisation of time-varying linear systems via Lyapunov differential equations

NASA Astrophysics Data System (ADS)

Zhou, Bin; Cai, Guang-Bin; Duan, Guang-Ren

2013-02-01

This article studies stabilisation problem for time-varying linear systems via state feedback. Two types of controllers are designed by utilising solutions to Lyapunov differential equations. The first type of feedback controllers involves the unique positive-definite solution to a parametric Lyapunov differential equation, which can be solved when either the state transition matrix of the open-loop system is exactly known, or the future information of the system matrices are accessible in advance. Different from the first class of controllers which may be difficult to implement in practice, the second type of controllers can be easily implemented by solving a state-dependent Lyapunov differential equation with a given positive-definite initial condition. In both cases, explicit conditions are obtained to guarantee the exponentially asymptotic stability of the associated closed-loop systems. Numerical examples show the effectiveness of the proposed approaches.

Robust decentralised stabilisation of uncertain large-scale interconnected nonlinear descriptor systems via proportional plus derivative feedback

NASA Astrophysics Data System (ADS)

Li, Jian; Zhang, Qingling; Ren, Junchao; Zhang, Yanhao

2017-10-01

This paper studies the problem of robust stability and stabilisation for uncertain large-scale interconnected nonlinear descriptor systems via proportional plus derivative state feedback or proportional plus derivative output feedback. The basic idea of this work is to use the well-known differential mean value theorem to deal with the nonlinear model such that the considered nonlinear descriptor systems can be transformed into linear parameter varying systems. By using a parameter-dependent Lyapunov function, a decentralised proportional plus derivative state feedback controller and decentralised proportional plus derivative output feedback controller are designed, respectively such that the closed-loop system is quadratically normal and quadratically stable. Finally, a hypersonic vehicle practical simulation example and numerical example are given to illustrate the effectiveness of the results obtained in this paper.

Baby on the move: issues in neonatal transport.

PubMed

Teasdale, Debra; Hamilton, Catherine

2008-02-01

The 2003 review of UK neonatal services led to wide-ranging changes including the centralisation of intensive care into level 3 units, the geographical organisation of neonatal care into 'networks', and the setting up of dedicated network transport teams. Despite these changes, neonatal transport continues to be problematic. Approaches to neonatal transportation are not yet standardised and this presents logistical problems for staff. Risks need to be considered and managed effectively to ensure safety for all involved. Although algorithms are in use for general stabilisation of the neonates, more guidance is required for effective stabilisation and management of infants with complex/surgical conditions. Staff involved in transport need to understand how neonatal physiology may be altered during transportation. They should also consider the legal implications of neonatal transport which are likely to remain unclear until the law is challenged in some way.

[Forced displacement, childhood and adolescence: scenarios regarding socioeconomic stability].

PubMed

Patiño, Gonzalo A; Herrán, Oscar F

2012-06-01

Describing and analysing socio-economic stabilisation scenarios for populations which have been forcibly displaced paying special attention to the situation of children and adolescents. The analytic hierarchy process (AHP) multi-criteria decision-making method developed by Professor Thomas Saaty was used through expert workshops, involving researchers, leaders of NGOs and displaced communities living in the city of Bucaramanga. The partial result of this research showed that some elderly adults from forcibly displaced communities preferred to adapt themselves to urban centres, rather than return to their places of origin, particularly when it came to protecting younger children and dealing with their welfare. The method's consistency index and consistency ratio came within the expected parameters. Government-promoted social and economic stabilisation programmes must be rethought regarding forcibly displaced populations, particularly when situations are envisaged involving the welfare of children and adolescents.

Resolution of a periodontoid rheumatoid pannus mass in an elderly patient treated with a rigid cervical collar: A case report and literature review.

PubMed

Oseni, Abidemi; Kakavas, Georg; Scholz, Martin; Petridis, Athanasios

2016-06-17

In patients with C2 rheumatoid pannus with spinal cord compression the treatment of choice is extensive surgery either through a transoral resection of the dens axis or a dorsal stabilisation, or both. We present a case of an 11-mm rheumatoid pannus with significant compression of the spinal cord, which failed surgical treatment with respect to dorsal stabilisation. Therefore, rigid cervical collar for 8 weeks followed by soft collar for another 4 weeks was chosen as a treatment option. During the follow-up period of 1 year, the pannus reduced significantly and the spinal cord decompressed. In cases where surgery is not an option or is technically very demanding, the alternative of cervical collar immobilisation is a satisfying option.

Investigations on composition and morphology of electrochemical alumina and alumina yttria stabilised zirconia deposits

NASA Astrophysics Data System (ADS)

El Hajjaji, S.; Manov, S.; Roy, J.; Aigouy, T.; Ben Bachir, A.; Aries, L.

2001-08-01

Conversion coatings modified by deposits of electrolytic alumina added or not with yttria and/or zirconia, have been studied which are well known for their resistance to chemical attack and high temperature. Conversion coating, characterised by a particular morphology and strong interfacial adhesion with the substrate, facilitate the electrochemical deposition of ceramic layers and enhance their adhesion to the substrate. Zirconia-alumina coating behaviour at 1000°C is similar to that of alumina coating; from 800°C, the chromium diffuses from the stainless steel through the electrolytic refractory coating up to the external interface, provokes discontinuities and can modify its protective character. Yttrium stabilises the cubic and the tetragonal form of the zirconia; so, during cooling, the phase transformation near 1000°C of tetragonal zirconia to monoclinic form cannot take place.

Brain Structural Effects of Psychopharmacological Treatment in Bipolar Disorder

PubMed Central

McDonald, Colm

2015-01-01

Bipolar disorder is associated with subtle neuroanatomical deficits including lateral ventricular enlargement, grey matter deficits incorporating limbic system structures, and distributed white matter pathophysiology. Substantial heterogeneity has been identified by structural neuroimaging studies to date and differential psychotropic medication use is potentially a substantial contributor to this. This selective review of structural neuroimaging and diffusion tensor imaging studies considers evidence that lithium, mood stabilisers, antipsychotic medication and antidepressant medications are associated with neuroanatomical variation. Most studies are negative and suffer from methodological weaknesses in terms of directly assessing medication effects on neuroanatomy, since they commonly comprise posthoc assessments of medication associations with neuroimaging metrics in small heterogenous patient groups. However the studies which report positive findings tend to form a relatively consistent picture whereby lithium and antiepileptic mood stabiliser use is associated with increased regional grey matter volume, especially in limbic structures. These findings are further supported by the more methodologically robust studies which include large numbers of patients or repeated intra-individual scanning in longitudinal designs. Some similar findings of an apparently ameliorative effect of lithium on white matter microstructure are also emerging. There is less support for an effect of antipsychotic or antidepressant medication on brain structure in bipolar disorder, but these studies are further limited by methodological difficulties. In general the literature to date supports a normalising effect of lithium and mood stabilisers on brain structure in bipolar disorder, which is consistent with the neuroprotective characteristics of these medications identified by preclinical studies. PMID:26412064

Enhancement of tetragonal anisotropy and stabilisation of the tetragonal phase by Bi/Mn-double-doping in BaTiO3 ferroelectric ceramics

PubMed Central

Yabuta, Hisato; Tanaka, Hidenori; Furuta, Tatsuo; Watanabe, Takayuki; Kubota, Makoto; Matsuda, Takanori; Ifuku, Toshihiro; Yoneda, Yasuhiro

2017-01-01

To stabilise ferroelectric-tetragonal phase of BaTiO3, the double-doping of Bi and Mn up to 0.5 mol% was studied. Upon increasing the Bi content in BaTiO3:Mn:Bi, the tetragonal crystal-lattice-constants a and c shrank and elongated, respectively, resulting in an enhancement of tetragonal anisotropy, and the temperature-range of the ferroelectric tetragonal phase expanded. X-ray absorption fine structure measurements confirmed that Bi and Mn were located at the A(Ba)-site and B(Ti)-site, respectively, and Bi was markedly displaced from the centrosymmetric position in the BiO12 cluster. This A-site substitution of Bi also caused fluctuations of B-site atoms. Magnetic susceptibility measurements revealed a change in the Mn valence from +4 to +3 upon addition of the same molar amount of Bi as Mn, probably resulting from a compensating behaviour of the Mn at Ti4+ sites for donor doping of Bi3+ into the Ba2+ site. Because addition of La3+ instead of Bi3+ showed neither the enhancement of the tetragonal anisotropy nor the stabilisation of the tetragonal phase, these phenomena in BaTiO3:Mn:Bi were not caused by the Jahn-Teller effect of Mn3+ in the MnO6 octahedron, but caused by the Bi-displacement, probably resulting from the effect of the 6 s lone-pair electrons in Bi3+. PMID:28367973

Bioaccumulation of metals in ryegrass (Lolium perenne L.) following the application of lime stabilised, thermally dried and anaerobically digested sewage sludge.

PubMed

Healy, M G; Ryan, P C; Fenton, O; Peyton, D P; Wall, D P; Morrison, L

2016-08-01

The uptake and accumulation of metals in plants is a potential pathway for the transfer of environmental contaminants in the food chain, and poses potential health and environmental risks. In light of increased population growth and urbanisation, the safe disposal of sewage sludge, which can contain significant levels of toxic contaminants, remains an environmental challenge globally. The aims of this experiment were to apply municipal sludge, having undergone treatment by thermal drying, anaerobic digestion, and lime stabilisation, to permanent grassland in order to assess the bioaccumulation of metals (B, Al, Ti, V, Cr, Mn, Co, Ni, Cu, Zn, As, Nb, Mo, Sb, Ba, W, Pb, Fe, Cd) by perennial ryegrass over a period of up to 18 weeks after application. The legislation currently prohibits use of grassland for fodder or grazing for at least three weeks after application of treated sewage sludge (biosolids). Five treatments were used: thermally dried (TD), anaerobically digested (AD) and lime stabilised (LS) sludge all from one wastewater treatment plant (WWTP), AD sludge from another WWTP, and a study control (grassland only, without application of biosolids). In general, there was no significant difference in metal content of the ryegrass between micro-plots that received treated municipal sludge and the control over the study duration. The metal content of the ryegrass was below the levels at which phytotoxicity occurs and below the maximum levels specified for animal feeds. Copyright © 2016 Elsevier Inc. All rights reserved.

The interaction of projectiles with tissues and the management of ballistic fractures.

PubMed

Clasper, J

2001-02-01

Wounds to the limbs are the commonest injuries seen during armed conflict and injury results from the transfer of energy from the missile to the tissues. There are a number of factors that determine the transfer of energy, and thus the extent of wounding. These include the velocity of the missile, its shape and stability, and the tissue through which the missile passes. Many of the wounds involve bone, and because of the interaction of missiles with bone, significant fractures can occur. In many previous conflicts amputation was considered the treatment of choice for many limb injuries, but with recent advances in the management of severe open fractures, many of these limbs are now salvageable. Whilst the basic principles of the initial débridement remain unchanged, techniques of fracture stabilisation and definitive soft tissue cover have changed, and it is necessary to consider these in relation to military fractures. Definitive soft tissue closure can be safely delayed until evacuation further down the medical chain, but stabilisation of the fracture must be considered at the time of initial surgery. Many of the advances in fracture management may be unsuitable for use in a military environment due to logistical constraints. In addition it is likely that wound infection will be more common with military injuries, and this will influence the treatment. This paper considers the interaction of missiles with soft tissue and bone, and discusses possible methods of fracture stabilisation in the military environment.

The distribution of actin immunoreactivity in rhabdomeres of tipulid flies in relation to extracellular membrane shedding.

PubMed

Blest, A D; Stowe, S; Clausen, J A; Carter, M

1991-09-01

Rhabdomeres of tipulid flies lose membrane during turnover from a 'shedding zone' composed of microvillar tips. These distal domains lack intramicrovillar cytoskeletons and appear to be empty sacs of membrane. Recent concerns about the role of ninaC mechano-enzymes in the architecture of dipteran rhabdomeral microvilli and the dynamic role that they may play in the creation of shedding zones demand an examination of the distribution of actin in tipulid rhabdomeres. We compared rhabdomeres from tipulid retinae incubated before fixation for immunocytochemistry in a buffer without additives and a stabilising buffer that contained a cocktail of cysteine protease inhibitors; both were challenged by an anti-actin antibody for immunogold labelling after embedding in LR White Resin. Shedding zones thus processed collapse to structureless detritus. Stabilised and unstabilized shedding zones were immunonegative to anti-actin. To ensure that the negative results were not consequent upon conformational changes generated by the processing protocol, we examined microvilli of degenerating rhabdomeres of the Drosophila light-dependent retinal degeneration mutant rdgBKS222 (which separate and collapse without creating a shedding zone) and found the detritus they generate to be immunopositive to anti-actin. Stabilised and unstabilized regions of basal regions of tipulid rhabdomeres were equally immunopositive. We infer that (a) actin is absent from shedding zones; (b) actin is not degraded by microvillar cysteine proteases. The implications of these conclusions are discussed in relation to some functional models of arthropod photoreceptor microvilli.

High power laser source for atom cooling based on reliable telecoms technology with all fibre frequency stabilisation

NASA Astrophysics Data System (ADS)

Legg, Thomas; Farries, Mark

2017-02-01

Cold atom interferometers are emerging as important tools for metrology. Designed into gravimeters they can measure extremely small changes in the local gravitational field strength and be used for underground surveying to detect buried utilities, mineshafts and sinkholes prior to civil works. To create a cold atom interferometer narrow linewidth, frequency stabilised lasers are required to cool the atoms and to setup and measure the atom interferometer. These lasers are commonly either GaAs diodes, Ti Sapphire lasers or frequency doubled InGaAsP diodes and fibre lasers. The InGaAsP DFB lasers are attractive because they are very reliable, mass-produced, frequency controlled by injection current and simply amplified to high powers with fibre amplifiers. In this paper a laser system suitable for Rb atom cooling, based on a 1560nm DFB laser and erbium doped fibre amplifier, is described. The laser output is frequency doubled with fibre coupled periodically poled LiNbO3 to a wavelength of 780nm. The output power exceeds 1 W at 780nm. The laser is stabilised at 1560nm against a fibre Bragg resonator that is passively temperature compensated. Frequency tuning over a range of 1 GHz is achieved by locking the laser to sidebands of the resonator that are generated by a phase modulator. This laser design is attractive for field deployable rugged systems because it uses all fibre coupled components with long term proven reliability.

Brain Structural Effects of Psychopharmacological Treatment in Bipolar Disorder.

PubMed

McDonald, Colm

2015-01-01

Bipolar disorder is associated with subtle neuroanatomical deficits including lateral ventricular enlargement, grey matter deficits incorporating limbic system structures, and distributed white matter pathophysiology. Substantial heterogeneity has been identified by structural neuroimaging studies to date and differential psychotropic medication use is potentially a substantial contributor to this. This selective review of structural neuroimaging and diffusion tensor imaging studies considers evidence that lithium, mood stabilisers, antipsychotic medication and antidepressant medications are associated with neuroanatomical variation. Most studies are negative and suffer from methodological weaknesses in terms of directly assessing medication effects on neuroanatomy, since they commonly comprise posthoc assessments of medication associations with neuroimaging metrics in small heterogenous patient groups. However the studies which report positive findings tend to form a relatively consistent picture whereby lithium and antiepileptic mood stabiliser use is associated with increased regional grey matter volume, especially in limbic structures. These findings are further supported by the more methodologically robust studies which include large numbers of patients or repeated intra-individual scanning in longitudinal designs. Some similar findings of an apparently ameliorative effect of lithium on white matter microstructure are also emerging. There is less support for an effect of antipsychotic or antidepressant medication on brain structure in bipolar disorder, but these studies are further limited by methodological difficulties. In general the literature to date supports a normalising effect of lithium and mood stabilisers on brain structure in bipolar disorder, which is consistent with the neuroprotective characteristics of these medications identified by preclinical studies.

Viscoelastic properties of a spinal posterior dynamic stabilisation device.

PubMed

Lawless, Bernard M; Barnes, Spencer C; Espino, Daniel M; Shepherd, Duncan E T

2016-06-01

The purpose of this study was to quantify the frequency dependent viscoelastic properties of two types of spinal posterior dynamic stabilisation devices. In air at 37°C, the viscoelastic properties of six BDyn 1 level, six BDyn 2 level posterior dynamic stabilisation devices (S14 Implants, Pessac, France) and its elastomeric components (polycarbonate urethane and silicone) were measured using Dynamic Mechanical Analysis. The viscoelastic properties were measured over the frequency range 0.01-30Hz. The BDyn devices and its components were viscoelastic throughout the frequency range tested. The mean storage stiffness and mean loss stiffness of the BDyn 1 level device, BDyn 2 level device, silicone component and polycarbonate urethane component all presented a logarithmic relationship with respect to frequency. The storage stiffness of the BDyn 1 level device ranged from 95.56N/mm to 119.29N/mm, while the BDyn 2 level storage stiffness ranged from 39.41N/mm to 42.82N/mm. BDyn 1 level device and BDyn 2 level device loss stiffness ranged from 10.72N/mm to 23.42N/mm and 4.26N/mm to 9.57N/mm, respectively. No resonant frequencies were recorded for the devices or its components. The elastic property of BDyn 1 level device is influenced by the PCU and silicone components, in the physiological frequency range. The viscoelastic properties calculated in this study may be compared to spinal devices and spinal structures. Copyright © 2016 Elsevier Ltd. All rights reserved.

Placement of Intubating Laryngeal Mask Airway Is Easier than Placement of Laryngeal Tube during Manual In-Line Stabilisation of The Neck

PubMed Central

Komatsu, R.; Nagata, O.; Kamata, K.; Yamagata, K.; Sessler, D.I.; Ozaki, M.

2005-01-01

Summary We compared the usefulness of the laryngeal tube (LT) with the intubating laryngeal mask airway (ILMA) in 51 patients whose necks were stabilised by manual in-line traction. After induction of anaesthesia and neuromuscular block, the LT and ILMA were inserted consecutively in a randomised, crossover design. During pressure-controlled ventilation (20 cmH2O inspiratory pressure), we measured insertion attempts, time to establish positive-pressure ventilation, tidal volume, gastric insufflation, and minimum airway pressure at which gas leaked around the cuff. Data were compared using Wilcoxon signed-rank tests; P<0.05 was considered significant. Insertion was more difficult with the LT (successful at first attempt in 16 patients) than with the ILMA (successful at first attempt in 42 patients, P<0.0001). Time required for insertion was longer for the LT (28 [23–35] sec, median [interquartile range]) than the ILMA (20 [15–25] sec, P=0.0009). Tidal volume was less for the LT (440 [290–670] ml) than the ILMA. (630 [440–750] ml, P=0.013). Minimum airway pressure at which gas leak occurred and incidence of gastric insufflation were similar with two devices. In patients whose necks were stabilised with manual in-line traction, insertion of the ILMA was easier and quicker than insertion of the LT and tidal volume was greater with the ILMA than the LT. PMID:15644005

Cooperation or Competition? The American and French Foreign Policies in Africa (Cooperation ou concurrence? La politique africaine de la France et des Etats-Unis en Afrique sub-saharienne)

DTIC Science & Technology

2005-07-26

Villepin, appelle « des conflits ancestraux >>, c’est-di-dire des conflits pour le contr6le de ressources primaires , ou de territoire, ou pour des diff~rends...traduira par une plus grande attention portde aux sujets africains et aussi d la part du budget pour l’Afrique. Le facteur religieux Les missionnaires en...grands avions de transport ou celles des soldats 6tablissant des centres de soins m6dicaux avec les ONG. Comme Jean-Paul Ngoupand6 l’a exprim6: << On

Differents aspects du fer dans l'organisme

PubMed Central

Bessis, Marcel; Breton-Gorius, Janine

1959-01-01

On voit des molécules de ferritine apparaitre dans le cytoplasme des cellules réticulaires au cours de la digestion des érythrocytes, autour des stromas phagocytés. Cette ferritine s'accumule en amas dans lesquels entrent d'autres substances, en particulier des lipides, provenant aussi des stromas globulaires et qui apparaissent sous forme myélinique. Souvent la ferritine se dispose d'une manière cristalline. Parfois la ferritine et l'apoferritine alternent dans ces cristaux. Parfois l'hémosidérine contient des cristaux qui semblent bien être de l'apoferritine pure. L'injection de sels de fer donne lieu à l'apparition de ferritine dans les cellules réticulaires. Dans les conditions de nos expériences, la plus grande partie du fer injecté était sous forme de ferritine dans un délai de 3 jours. Un aspect intermédiaire entre celui du fer injecté et celui de la ferritine a été trouvé. Dans le cas des injections de saccharate de fer ce sont de fines aiguilles; dans le cas des injections de lactate de fer, il s'agit de masses fibreuses. PMID:13800106

Characterization of conducting cellulose acetate based polymer electrolytes doped with "green" ionic mixture.

PubMed

Ramesh, S; Shanti, R; Morris, Ezra

2013-01-02

Polymer electrolytes were developed by solution casting technique utilizing the materials of cellulose acetate (CA), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and deep eutectic solvent (DES). The DES is synthesized from the mixture of choline chloride and urea of 1:2 ratios. The increasing DES content well plasticizes the CA:LiTFSI:DES matrix and gradually improves the ionic conductivity and chemical integrity. The highest conducting sample was identified for the composition of CA:LiTFSI:DES (28 wt.%:12 wt.%:60 wt.%), which has the greatest ability to retain the room temperature ionic conductivity over the entire 30 days of storage time. The changes in FTIR cage peaks upon varying the DES content in CA:LiTFSI:DES prove the complexation. This complexation results in the collapse of CA matrix crystallinity, observed from the reduced intensity of XRD diffraction peaks. The DES-plasticized sample is found to be more heat-stable compared to pure CA. Nevertheless, the addition of DES diminishes the CA:LiTFSI matrix's heat-resistivity but at the minimum addition the thermal stability is enhanced. Copyright © 2012 Elsevier Ltd. All rights reserved.

Detached-Eddy Simulation Based on the V2-F Model

NASA Technical Reports Server (NTRS)

Jee, Sol Keun; Shariff, Karim R.

2012-01-01

Detached-eddy simulation (DES) based on the v(sup 2)-f Reynolds-averaged Navier-Stokes (RANS) model is developed and tested. The v(sup 2)-f model incorporates the anisotropy of near-wall turbulence which is absent in other RANS models commonly used in the DES community. The v(sup 2)-f RANS model is modified in order the proposed v(sup 2)-f-based DES formulation reduces to a transport equation for the subgrid-scale kinetic energy isotropic turbulence. First, three coefficients in the elliptic relaxation equation are modified, which is tested in channel flows with friction Reynolds number up to 2000. Then, the proposed v(sup 2)-f DES model formulation is derived. The constant, C(sub DES), required in the DES formulation was calibrated by simulating both decaying and statistically-steady isotropic turbulence. After C(sub DES) was calibrated, the v(sub 2)-f DES formulation is tested for flow around a circular cylinder at a Reynolds number of 3900, in which case turbulence develops after separation. Simulations indicate that this model represents the turbulent wake nearly as accurately as the dynamic Smagorinsky model. Spalart-Allmaras-based DES is also included in the cylinder flow simulation for comparison.

Comprendre la maltraitance des aînés en pratique familiale

PubMed Central

Yaffe, Mark J.; Tazkarji, Bachir

2012-01-01

Résumé Objectif Présenter ce qui constitue la maltraitance des aînés, ce dont les médecins de famille devraient être au courant, les signes et les symptômes laissant présager de mauvais traitements chez des adultes plus âgés, comment l’outil Elder Abuse Suspicion Index peut aider à détecter la maltraitance et les options qui existent pour réagir en cas de soupçons de maltraitance. Sources des données On a fait une recension dans MEDLINE, PsycINFO et Social Work Abstracts pour trouver des publications en français ou en anglais, de 1970 à 2011, à l’aide des expressions elder abuse, elder neglect, elder mistreatment, seniors, older adults, violence, identification, detection tools et signs and symptoms. Les publications pertinentes ont fait l’objet d’un examen. Message principal La maltraitance des aînés est une cause importante de morbidité et de mortalité chez les adultes plus âgés. Si les médecins de famille sont bien placés pour détecter des mauvais traitements infligés aux aînés, leurs taux réels de signalement de cas de maltraitance sont plus faibles que dans d’autres professions. Cette situation pourrait s’améliorer s’ils comprenaient mieux les genres d’agissements qui constituent de la maltraitance des aînés, ainsi que les signes et les symptômes observés au bureau qui pourraient pointer vers des cas de mauvais traitements. La détection de tels cas pourrait être facilitée par le recours à un court outil validé, comme l’Elder Abuse Suspicion Index. Conclusion Les médecins de famille peuvent jouer un rôle plus important dans la détection d’une éventuelle maltraitance des aînés. Une fois qu’on soupçonne de mauvais traitements, il existe dans la plupart des communautés des services sociaux ou des forces de l’ordre accessibles pour effectuer des évaluations plus approfondies et intervenir.