25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2010 CFR

2010-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

ASTM and ASME-BPE Standards--Complying with the Needs of the Pharmaceutical Industry.

PubMed

Huitt, William M

2011-01-01

Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and standards and then modifying them in order to meet the more stringent requirements of the Food and Drug Administration (FDA). In 1997 the American Society of Mechanical Engineers (ASME) published the first Bioprocessing Equipment (BPE) Standard. Through harmonization efforts this relatively new standard has brought together, scrutinized, and refined industry accepted methodologies together with FDA compliance requirements, and has established an American National Standard that provides a comprehensive set of standards that are integral to the pharmaceutical industry. This article describes various American National Standards, including those developed and published by the American Society for Testing and Materials (ASTM), and how they apply to the pharmaceutical industry. It goes on to discuss the harmonization effort that takes place between the various standards developers in an attempt to prevent conflicts and omissions between the many standards. Also included are examples of tables and figures taken from the ASME-BPE Standard. These examples provide the reader with insight to the relevant content of the ASME-BPE Standard. Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and standards and then modifying them in order to meet the more stringent requirements of the Food and Drug Administration (FDA). In 1997 the American Society of Mechanical Engineers (ASME) published the first Bioprocessing Equipment (BPE) Standard. In its initial development and ongoing maintenance it works with other American National Standards developers to harmonize the many standards associated with the design, engineering, and construction of bioprocessing facilities. This harmonization effort has established a comprehensive set of standards for the betterment of the pharmaceutical industry at large. This effort is, and will remain, very important as technology, along with new and improved product and processes, evolve into the future.

78 FR 35085 - Small Business Size Standards: Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-11

... Classification System (NAICS) code 332991, Products and Services Code (PSC) 3110, made available for public... American Industry Classification System (NAICS) Industry Number as established by the Office of Management...

42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

Code of Federal Regulations, 2014 CFR

2014-10-01

..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

Code of Federal Regulations, 2012 CFR

2012-10-01

..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

Code of Federal Regulations, 2013 CFR

2013-10-01

..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

Code of Federal Regulations, 2011 CFR

2011-10-01

..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

Code of Federal Regulations, 2010 CFR

2010-10-01

..., the Self-Governance Tribe and the Secretary must agree upon and specify appropriate building codes and...-Governance Tribe in the preparation of its construction project proposal. If Tribal construction codes and standards (including national, regional, State, or Tribal building codes or construction industry standards...

Performance of automated and manual coding systems for occupational data: a case study of historical records.

PubMed

Patel, Mehul D; Rose, Kathryn M; Owens, Cindy R; Bang, Heejung; Kaufman, Jay S

2012-03-01

Occupational data are a common source of workplace exposure and socioeconomic information in epidemiologic research. We compared the performance of two occupation coding methods, an automated software and a manual coder, using occupation and industry titles from U.S. historical records. We collected parental occupational data from 1920-40s birth certificates, Census records, and city directories on 3,135 deceased individuals in the Atherosclerosis Risk in Communities (ARIC) study. Unique occupation-industry narratives were assigned codes by a manual coder and the Standardized Occupation and Industry Coding software program. We calculated agreement between coding methods of classification into major Census occupational groups. Automated coding software assigned codes to 71% of occupations and 76% of industries. Of this subset coded by software, 73% of occupation codes and 69% of industry codes matched between automated and manual coding. For major occupational groups, agreement improved to 89% (kappa = 0.86). Automated occupational coding is a cost-efficient alternative to manual coding. However, some manual coding is required to code incomplete information. We found substantial variability between coders in the assignment of occupations although not as large for major groups.

Improving Shipbuilding Productivity Through Use of Standards

DTIC Science & Technology

1978-06-01

ship- building industry. In addition to the more familiar standards (e.g. ASME Boiler and Pressure Vessel Code , IEEE-45, etc.) this will include an...will simply refer- ence valid standards as appropriate (e.g. ASME Boiler and Pressure Vessel Code ), and will hopefully work hand in hand with the

77 FR 56741 - Federal Acquisition Regulation; NAICS and Size Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

....102(a)(1)). * * * * * 0 4. Amend section 19.303 by adding a new sentence at the end of paragraph (a... Regulation (FAR) to clarify that new North American Industry Classification System (NAICS) codes are not... corresponding industry size standards. Other corresponding changes were also made. Published industry size...

75 FR 13802 - Small Business Size Standards: Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-23

...) code 325120 (Industrial Gases Manufacturing). According to the request, no small business manufacturers... for LPG, PSC 6830 (Compressed and Liquefied Gases), under NAICS code 325120 (Industrial Gases... for Liquid Propane Gas (LPG). SUMMARY: The U.S. Small Business Administration (SBA) is considering...

40 CFR 432.1 - General Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS MEAT AND POULTRY PRODUCTS POINT SOURCE CATEGORY § 432.1 General Applicability. As defined more... the following industrial classification codes: Standard industrial classification 1 North Americanindustrial classification system 2 SIC 0751 NAICS 311611. SIC 2011 NAICS 311612. SIC 2013 NAICS 311615. SIC...

Oil and gas field code master list, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This document contains data collected through October 1993 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service.

Safety and health in the construction of fixed offshore installations in the petroleum industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-01-01

A meeting convened by the ILO (International Labor Office) on safety problems in the offshore petroleum industry recommended the preparation of a code of practice setting out standards for safety and health during the construction of fixed offshore installations. Such a code, to be prepared by the ILO in co-operation with other bodies, including the Inter-Governmental Maritime Consultative Organisation (IMCO), was to take into consideration existing standards applicable to offshore construction activities and to supplement the ILO codes of practice on safety and health in building and civil engineering work, shipbuilding and ship repairing. (Copyright (c) International Labour Organisation 1981.)

49 CFR 230.8 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

....) NBIC. National Board Inspection Code published by the National Board of Boiler and Pressure Vessel.... American National Standards Institute. API. American Petroleum Institute. ASME. American Society of... separation into parts. Code of original construction. The manufacturer's or industry code in effect when the...

49 CFR 230.8 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

....) NBIC. National Board Inspection Code published by the National Board of Boiler and Pressure Vessel.... American National Standards Institute. API. American Petroleum Institute. ASME. American Society of... separation into parts. Code of original construction. The manufacturer's or industry code in effect when the...

49 CFR 230.8 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

....) NBIC. National Board Inspection Code published by the National Board of Boiler and Pressure Vessel.... American National Standards Institute. API. American Petroleum Institute. ASME. American Society of... separation into parts. Code of original construction. The manufacturer's or industry code in effect when the...

Code of practice for food handler activities.

PubMed

Smith, T A; Kanas, R P; McCoubrey, I A; Belton, M E

2005-08-01

The food industry regulates various aspects of food handler activities, according to legislation and customer expectations. The purpose of this paper is to provide a code of practice which delineates a set of working standards for food handler hygiene, handwashing, use of protective equipment, wearing of jewellery and body piercing. The code was developed by a working group of occupational physicians with expertise in both food manufacturing and retail, using a risk assessment approach. Views were also obtained from other occupational physicians working within the food industry and the relevant regulatory bodies. The final version of the code (available in full as Supplementary data in Occupational Medicine Online) therefore represents a broad consensus of opinion. The code of practice represents a set of minimum standards for food handler suitability and activities, based on a practical assessment of risk, for application in food businesses. It aims to provide useful working advice to food businesses of all sizes.

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

78 FR 8407 - Endosulfan; Pesticide Tolerance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-06

..., food manufacturers, or pesticide manufacturers. The following list of North American Industrial... (NAICS code 111). Animal Production (NAICS code 112). Food Manufacturing (NAICS code 311). Pesticide... statutory standards of the Federal Food, Drug and Cosmetic Act (FFDCA) section 408. EPA may in the future...

Self-Regulation in Broadcasting Revisited.

ERIC Educational Resources Information Center

Linton, Bruce A.

1987-01-01

Discusses the self-regulatory processes of the broadcast industry as related to advertising and programing standards after the elimination of the National Association of Broadcasters (NAB) "Code." Asserts that, even though the code is gone, the process of self-regulation continues. (MM)

Regulating alcohol advertising: content analysis of the adequacy of federal and self-regulation of magazine advertisements, 2008-2010.

PubMed

Smith, Katherine C; Cukier, Samantha; Jernigan, David H

2014-10-01

We analyzed beer, spirits, and alcopop magazine advertisements to determine adherence to federal and voluntary advertising standards. We assessed the efficacy of these standards in curtailing potentially damaging content and protecting public health. We obtained data from a content analysis of a census of 1795 unique advertising creatives for beer, spirits, and alcopops placed in nationally available magazines between 2008 and 2010. We coded creatives for manifest content and adherence to federal regulations and industry codes. Advertisements largely adhered to existing regulations and codes. We assessed only 23 ads as noncompliant with federal regulations and 38 with industry codes. Content consistent with the codes was, however, often culturally positive in terms of aspirational depictions. In addition, creatives included degrading and sexualized images, promoted risky behavior, and made health claims associated with low-calorie content. Existing codes and regulations are largely followed regarding content but do not adequately protect against content that promotes unhealthy and irresponsible consumption and degrades potentially vulnerable populations in its depictions. Our findings suggest further limitations and enhanced federal oversight may be necessary to protect public health.

The Exchange Data Communication System based on Centralized Database for the Meat Industry

NASA Astrophysics Data System (ADS)

Kobayashi, Yuichi; Taniguchi, Yoji; Terada, Shuji; Komoda, Norihisa

We propose applying the EDI system that is based on centralized database and supports conversion of code data to the meat industry. This system makes it possible to share exchange data on beef between enterprises from producers to retailers by using Web EDI technology. In order to efficiently convert code direct conversion of a sender's code to a receiver's code using a code map is used. This system that mounted this function has been implemented in September 2004. Twelve enterprises including retailers, and processing traders, and wholesalers were using the system as of June 2005. In this system, the number of code maps relevant to the introductory cost of the code conversion function was lower than the theoretical value and were close to the case that a standard code is mediated.

Wood Use in the U.S. Pallet and Container Industry: 1995

Treesearch

Vijay S. Reddy; Robert J. Bush; Matthew S. Bumgardner; James L. Chamberlain; Philip A. Araman

1997-01-01

This report from the Center for Forest Products Marketing and Management at Virginia Tech provides results of a study ofwood material use in the pallet and container industry (Standard Industrial Classification codes 2441, 2448, and 2449). The report furnishes estimates of industry-wide use ofvarious wood materials (i.e., solid hardwood, solid softwood,oriented strand...

Reformation of Regulatory Technical Standards for Nuclear Power Generation Equipments in Japan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mikio Kurihara; Masahiro Aoki; Yu Maruyama

2006-07-01

Comprehensive reformation of the regulatory system has been introduced in Japan in order to apply recent technical progress in a timely manner. 'The Technical Standards for Nuclear Power Generation Equipments', known as the Ordinance No.622) of the Ministry of International Trade and Industry, which is used for detailed design, construction and operating stage of Nuclear Power Plants, was being modified to performance specifications with the consensus codes and standards being used as prescriptive specifications, in order to facilitate prompt review of the Ordinance with response to technological innovation. The activities on modification were performed by the Nuclear and Industrial Safetymore » Agency (NISA), the regulatory body in Japan, with support of the Japan Nuclear Energy Safety Organization (JNES), a technical support organization. The revised Ordinance No.62 was issued on July 1, 2005 and is enforced from January 1 2006. During the period from the issuance to the enforcement, JNES carried out to prepare enforceable regulatory guide which complies with each provisions of the Ordinance No.62, and also made technical assessment to endorse the applicability of consensus codes and standards, in response to NISA's request. Some consensus codes and standards were re-assessed since they were already used in regulatory review of the construction plan submitted by licensee. Other consensus codes and standards were newly assessed for endorsement. In case that proper consensus code or standards were not prepared, details of regulatory requirements were described in the regulatory guide as immediate measures. At the same time, appropriate standards developing bodies were requested to prepare those consensus code or standards. Supplementary note which provides background information on the modification, applicable examples etc. was prepared for convenience to the users of the Ordinance No. 62. This paper shows the activities on modification and the results, following the NISA's presentation at ICONE-13 that introduced the framework of the performance specifications and the modification process of the Ordinance NO. 62. (authors)« less

The context of ethics in the health care industry.

PubMed

Wells, B; Spinks, N

1996-01-01

Examines ethics in the health care industry from the perspectives of investors, employees, patients, competitors and the environment. Ethical behaviour in the health care industry is essential and desirable; however, determining which behavioural actions are ethical and which are unethical is difficult. Although never will everyone agree on specific ethical standards, everyone should agree that setting ethical standards is vital. Therefore, administrators of health care institutions and health care providers should work together to establish codes of ethics which define boundaries for ethical behaviours in the health care industry.

76 FR 11339 - Update to NFPA 101, Life Safety Code, for State Home Facilities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 51 RIN 2900-AN59 Update to NFPA 101, Life Safety Code..., Life Safety Code. The change is designed to assure that State Home facilities meet current industry- wide standards regarding life safety and fire safety. DATES: Effective Date: This final rule is...

78 FR 72955 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Proposed Rule Change, as...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-04

... industry, as defined by the Standard Industrial Classification Codes utilized by the Division of Corporate Finance of the Commission.\\26\\ This limitation does not apply to investments in securities issued or...

78 FR 49412 - Personal Flotation Devices Labeling and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-14

...The Coast Guard proposes to remove references to type codes in its regulations on the carriage and labeling of Coast Guard-approved personal flotation devices (PFDs). PFD type codes are unique to Coast Guard approval and are not well understood by the public. Removing these type codes from our regulations would facilitate future incorporation by reference of new industry consensus standards for PFD labeling that will more effectively convey safety information, and is a step toward harmonization of our regulations with PFD requirements in Canada and in other countries.

40 CFR 442.1 - General applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... under a wide variety of Standard Industrial Classification (SIC) codes. Several of the most common SIC... industrial, commercial, or Publicly Owned Treatment Works (POTW) operations, provided that the cleaning is... drums, intermediate bulk containers, or closed-top hoppers. (3) Wastewater from a facility that...

Regulating Alcohol Advertising: Content Analysis of the Adequacy of Federal and Self-Regulation of Magazine Advertisements, 2008–2010

PubMed Central

Cukier, Samantha; Jernigan, David H.

2014-01-01

Objectives. We analyzed beer, spirits, and alcopop magazine advertisements to determine adherence to federal and voluntary advertising standards. We assessed the efficacy of these standards in curtailing potentially damaging content and protecting public health. Methods. We obtained data from a content analysis of a census of 1795 unique advertising creatives for beer, spirits, and alcopops placed in nationally available magazines between 2008 and 2010. We coded creatives for manifest content and adherence to federal regulations and industry codes. Results. Advertisements largely adhered to existing regulations and codes. We assessed only 23 ads as noncompliant with federal regulations and 38 with industry codes. Content consistent with the codes was, however, often culturally positive in terms of aspirational depictions. In addition, creatives included degrading and sexualized images, promoted risky behavior, and made health claims associated with low-calorie content. Conclusions. Existing codes and regulations are largely followed regarding content but do not adequately protect against content that promotes unhealthy and irresponsible consumption and degrades potentially vulnerable populations in its depictions. Our findings suggest further limitations and enhanced federal oversight may be necessary to protect public health. PMID:24228667

All You Need to Know about Videodiscs: One Easy Lesson.

ERIC Educational Resources Information Center

Padgett, Helen L.

1993-01-01

Explains videodisc technology and its uses in education. Topics addressed include formats of videodiscs, including CAV discs (constant angular velocity) and CLV discs (constant linear velocity); the three industry-standard levels of interactivity; bar codes; bar-code readers; and finding information on a videodisc. (LRW)

Pressure Sensitive Tape and Label Surface Coating Industry: New Source Performance Standards (NSPS)

EPA Pesticide Factsheets

Learn about the New Source Performance Standards (NSPS) for pressure sensitive tape and label surface coating. Read the rule summary and history, and find the code of federal regulations and federal register citations.

Digital Semaphore: Technical Feasibility of QR Code Optical Signaling for Fleet Communications

DTIC Science & Technology

2013-06-01

Standards (http://www.iso.org) JIS Japanese Industrial Standard JPEG Joint Photographic Experts Group (digital image format; http://www.jpeg.org) LED...Denso Wave corporation in the 1990s for the Japanese automotive manufacturing industry. See Appendix A for full details. Reed-Solomon Error...eliminates camera blur induced by the shutter, providing clear images at extremely high frame rates. Thusly, digital cinema cameras are more suitable

4 CFR 21.5 - Protest issues not for consideration.

Code of Federal Regulations, 2010 CFR

2010-01-01

... official to file a protest or not to file a protest in connection with a public-private competition. [61 FR... business size standards and North American Industry Classification System (NAICS) standards. Challenges of established size standards or the size status of particular firms, and challenges of the selected NAICS code...

A hybrid design methodology for structuring an Integrated Environmental Management System (IEMS) for shipping business.

PubMed

Celik, Metin

2009-03-01

The International Safety Management (ISM) Code defines a broad framework for the safe management and operation of merchant ships, maintaining high standards of safety and environmental protection. On the other hand, ISO 14001:2004 provides a generic, worldwide environmental management standard that has been utilized by several industries. Both the ISM Code and ISO 14001:2004 have the practical goal of establishing a sustainable Integrated Environmental Management System (IEMS) for shipping businesses. This paper presents a hybrid design methodology that shows how requirements from both standards can be combined into a single execution scheme. Specifically, the Analytic Hierarchy Process (AHP) and Fuzzy Axiomatic Design (FAD) are used to structure an IEMS for ship management companies. This research provides decision aid to maritime executives in order to enhance the environmental performance in the shipping industry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

FY 2013 annual report focuses on the following areas: vehicle modeling and simulation, component and systems evaluations, laboratory and field evaluations, codes and standards, industry projects, and vehicle systems optimization.

Industry and Occupation in the Electronic Health Record: An Investigation of the National Institute for Occupational Safety and Health Industry and Occupation Computerized Coding System.

PubMed

Schmitz, Matthew; Forst, Linda

2016-02-15

Inclusion of information about a patient's work, industry, and occupation, in the electronic health record (EHR) could facilitate occupational health surveillance, better health outcomes, prevention activities, and identification of workers' compensation cases. The US National Institute for Occupational Safety and Health (NIOSH) has developed an autocoding system for "industry" and "occupation" based on 1990 Bureau of Census codes; its effectiveness requires evaluation in conjunction with promoting the mandatory addition of these variables to the EHR. The objective of the study was to evaluate the intercoder reliability of NIOSH's Industry and Occupation Computerized Coding System (NIOCCS) when applied to data collected in a community survey conducted under the Affordable Care Act; to determine the proportion of records that are autocoded using NIOCCS. Standard Occupational Classification (SOC) codes are used by several federal agencies in databases that capture demographic, employment, and health information to harmonize variables related to work activities among these data sources. There are 359 industry and occupation responses that were hand coded by 2 investigators, who came to a consensus on every code. The same variables were autocoded using NIOCCS at the high and moderate criteria level. Kappa was .84 for agreement between hand coders and between the hand coder consensus code versus NIOCCS high confidence level codes for the first 2 digits of the SOC code. For 4 digits, NIOCCS coding versus investigator coding ranged from kappa=.56 to .70. In this study, NIOCCS was able to achieve production rates (ie, to autocode) 31%-36% of entered variables at the "high confidence" level and 49%-58% at the "medium confidence" level. Autocoding (production) rates are somewhat lower than those reported by NIOSH. Agreement between manually coded and autocoded data are "substantial" at the 2-digit level, but only "fair" to "good" at the 4-digit level. This work serves as a baseline for performance of NIOCCS by investigators in the field. Further field testing will clarify NIOCCS effectiveness in terms of ability to assign codes and coding accuracy and will clarify its value as inclusion of these occupational variables in the EHR is promoted.

13 CFR 124.3 - What definitions are important in the 8(a) BD program?

Code of Federal Regulations, 2011 CFR

2011-01-01

... functions of the firm. Immediate family member means father, mother, husband, wife, son, daughter, brother... Native Hawaiians. Negative control is defined in part 121 of this title. Non-disadvantaged individual.... Primary industry classification means the four digit Standard Industrial Classification (SIC) code...

An Australian perspective on developing standards and ensuring compliance.

PubMed

Thornber, Peter M

2010-01-01

Australia is a federation of states and territories, each with their own parliament and animal-welfare laws. Australian animal-welfare legislation imposes a "duty of care" on people responsible for the care and well-being of animals under their management. In the livestock sector, this responsibility is mirrored by the ongoing development of standards, guidelines, and codes of practice to assist people to understand their responsibilities and to meet expectations concerning animal welfare. The Australian Animal Welfare Strategy (AAWS) is the national animal-welfare policy blueprint for sustainable improvements in animal welfare, and one of its key goals is to achieve greater consistency in the development, implementation, and enforcement of animal-welfare standards. Standards, guidelines, and model codes also inform the development of contemporary, evidence-based quality assurance programs for individual livestock industries and provide the basis for competency-based training programs for animal handlers. Australian standards have been developed for pigs and land transport of livestock, and work is progressing on national standards for cattle, sheep, horses, zoo animals, dogs, and cats. Other achievements include the development of requirements for the care and use of animals in research and teaching, guidelines for the welfare of aquatic animals, and codes of practice for the humane killing of pest animals. State and territory governments are developing a framework for consistent regulation and compliance in consultation with industries and welfare organizations.

Surface Coating of Plastic Parts for Business Machines (Industrial Surface Coating): New Source Performance Standards (NSPS)

EPA Pesticide Factsheets

Learn more about the new source performance standards (NSPS) for surface coating of plastic parts for business machines by reading the rule summary and history and finding the code of federal regulations as well as related rules.

A Standard-Driven Data Dictionary for Data Harmonization of Heterogeneous Datasets in Urban Geological Information Systems

NASA Astrophysics Data System (ADS)

Liu, G.; Wu, C.; Li, X.; Song, P.

2013-12-01

The 3D urban geological information system has been a major part of the national urban geological survey project of China Geological Survey in recent years. Large amount of multi-source and multi-subject data are to be stored in the urban geological databases. There are various models and vocabularies drafted and applied by industrial companies in urban geological data. The issues such as duplicate and ambiguous definition of terms and different coding structure increase the difficulty of information sharing and data integration. To solve this problem, we proposed a national standard-driven information classification and coding method to effectively store and integrate urban geological data, and we applied the data dictionary technology to achieve structural and standard data storage. The overall purpose of this work is to set up a common data platform to provide information sharing service. Research progresses are as follows: (1) A unified classification and coding method for multi-source data based on national standards. Underlying national standards include GB 9649-88 for geology and GB/T 13923-2006 for geography. Current industrial models are compared with national standards to build a mapping table. The attributes of various urban geological data entity models are reduced to several categories according to their application phases and domains. Then a logical data model is set up as a standard format to design data file structures for a relational database. (2) A multi-level data dictionary for data standardization constraint. Three levels of data dictionary are designed: model data dictionary is used to manage system database files and enhance maintenance of the whole database system; attribute dictionary organizes fields used in database tables; term and code dictionary is applied to provide a standard for urban information system by adopting appropriate classification and coding methods; comprehensive data dictionary manages system operation and security. (3) An extension to system data management function based on data dictionary. Data item constraint input function is making use of the standard term and code dictionary to get standard input result. Attribute dictionary organizes all the fields of an urban geological information database to ensure the consistency of term use for fields. Model dictionary is used to generate a database operation interface automatically with standard semantic content via term and code dictionary. The above method and technology have been applied to the construction of Fuzhou Urban Geological Information System, South-East China with satisfactory results.

Computer-based coding of free-text job descriptions to efficiently identify occupations in epidemiological studies

PubMed Central

Russ, Daniel E.; Ho, Kwan-Yuet; Colt, Joanne S.; Armenti, Karla R.; Baris, Dalsu; Chow, Wong-Ho; Davis, Faith; Johnson, Alison; Purdue, Mark P.; Karagas, Margaret R.; Schwartz, Kendra; Schwenn, Molly; Silverman, Debra T.; Johnson, Calvin A.; Friesen, Melissa C.

2016-01-01

Background Mapping job titles to standardized occupation classification (SOC) codes is an important step in identifying occupational risk factors in epidemiologic studies. Because manual coding is time-consuming and has moderate reliability, we developed an algorithm called SOCcer (Standardized Occupation Coding for Computer-assisted Epidemiologic Research) to assign SOC-2010 codes based on free-text job description components. Methods Job title and task-based classifiers were developed by comparing job descriptions to multiple sources linking job and task descriptions to SOC codes. An industry-based classifier was developed based on the SOC prevalence within an industry. These classifiers were used in a logistic model trained using 14,983 jobs with expert-assigned SOC codes to obtain empirical weights for an algorithm that scored each SOC/job description. We assigned the highest scoring SOC code to each job. SOCcer was validated in two occupational data sources by comparing SOC codes obtained from SOCcer to expert assigned SOC codes and lead exposure estimates obtained by linking SOC codes to a job-exposure matrix. Results For 11,991 case-control study jobs, SOCcer-assigned codes agreed with 44.5% and 76.3% of manually assigned codes at the 6- and 2-digit level, respectively. Agreement increased with the score, providing a mechanism to identify assignments needing review. Good agreement was observed between lead estimates based on SOCcer and manual SOC assignments (kappa: 0.6–0.8). Poorer performance was observed for inspection job descriptions, which included abbreviations and worksite-specific terminology. Conclusions Although some manual coding will remain necessary, using SOCcer may improve the efficiency of incorporating occupation into large-scale epidemiologic studies. PMID:27102331

Environmental Policy Tools: A User’s Guide.

DTIC Science & Technology

1995-09-01

Quality RTUs Remote Terminal Units EG&S Environmental Goods and Services SAB (EPA) Science Advisory Board ( Industry ) SCAQMD South Coast Air Quality...Management EPA Environmental Protection Agency District EPCRA Emergency Planning and Community- SIC Standard Industrial Code Right-To-Know Act SIP State...solution will be significantly different than complicate the decision. Foremost among these today’s? is: Will costs and burdens to industry and gov

An assessment of training needs for the lumber manufacturing industry in the eastern United States

Treesearch

Joseph Denig; Scott Page; Yuhua Su; Karen Martinson

2008-01-01

A training needs assessment of the primary forest products industry was conducted for 33 eastern states. his publication presents in detail the statistical analysis of the study. Of the 2,570 lumber manufacturing companies, consisting of firms with more than six employees for the U.S. Department of Labor Standard Industrial Classification Code 2421, the response rate...

The 2002 PhRMA Code and Pharmaceutical Marketing: did anybody bother to ask the reps?

PubMed

Sillup, George P; Trombetta, Bill; Klimberg, Ronald

2010-10-01

After marketing tactics resulted in $1.2 billion fines, the 2002 PhRMA Code attempted to standardize marketing and sales practices. Self-regulation had varied success by other industries and by pharmaceutical industries in other countries. Similarly, the Code addressed negative responses about pharmaceutical's practices but had no provisions for monitoring violations. Representative's (reps) perspectives were assessed using an 18-item instrument with 72 reps from 25 companies. Analyses indicated that reps from bigger companies, PhRMA and non-PhRMA, adhered better. The way reps adhered was split between adhering reluctantly and following faithfully. Two thirds felt it was more difficult to do their jobs, resulting from prior entertainment-based relationships with physicians.

Profile of the wood furniture and fixtures industry. EPA Office of Compliance sector notebook project

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-01

The furniture and fixtures industry encompasses companies that manufacture household, office, store, public building, and restaurant furniture and fixtures. The second section provides background information on the size, geographic distribution, employment, production, sales, and economic condition of the Wood Furniture and Fixtures industry. The type of facilities described within the document are also described in terms of their Standard Industrial Classification (SIC) codes. Additionally, this section contains a list of the largest companies in terms of sales.

ADAPSO Computer Services Industry Directory of Members, 1972-1973.

ERIC Educational Resources Information Center

Association of Data Processing Service Organizations, New York, NY.

The 1972-73 directory of the Association of Data Processing Service Organizations was designed to provide a list of those members subscribe to the Code of Ethical Standards and can be expected to provide reliable and efficient services to the users in the community. The Code is presented, and then full member firms are listed for states in the…

Code for ethical international recruitment practices: the CGFNS alliance case study.

PubMed

Shaffer, Franklin A; Bakhshi, Mukul; Dutka, Julia To; Phillips, Janice

2016-06-30

Projections indicate a global workforce shortage of approximately 4.3 million across the health professions. The need to ensure an adequate supply of health workers worldwide has created a context for the increased global migration of these professionals. The global trend in the migration of health professionals has given rise to the international recruitment industry to facilitate the passage of health workers from source to destination countries. This is particularly the case in the United States, where the majority of immigrant health professionals have come by way of the recruiting industry. This industry is largely unregulated in the United States as well as in many other countries, for which voluntary codes have been used as a means to increase transparency of the recruitment process, shape professional conduct, and mitigate harm to foreign-educated health workers. The CGFNS Alliance case study presented herein describes a multi-stakeholder effort in the United States to promote ethical recruitment practices. Such codes not only complement the WHO Global Code of Practice but are necessary to maximize the impact of these global standards on local settings. This case study offers both a historical perspective and a conceptual framework for examining the multiplicity of factors affecting the migration of human resources for health. The lessons learned provide critical insights into the factors pertaining to the relevancy and effectiveness of the WHO Code from the perspectives of both source and destination countries. This study provides a conceptual model for examining the usefulness of the WHO Code as well as how best to ensure its viability, sustainability, relevancy, and effectiveness in the global environment. This case study concludes with recommendations for evolving business models that need to be in place to strengthen the effectiveness of the WHO Code in the marketplace and to ensure its impact on the international recruitment industry in advancing ethical practices. These recommendations include using effective screening mechanisms to determine health professionals' readiness for migration as well as implementing certification processes to raise the practice standards for those directly involved in recruiting skilled workers and managing the migration flow.

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

40 CFR 68.56 - Maintenance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...

49 CFR 195.3 - Incorporation by reference.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Fittings Industry, Inc. (MSS), 127 Park Street, NE., Vienna, VA 22180. 5. American Society for Testing and...)) §§ 195.205(b)(1); 195.432(b). (12) API Standard 1104, “Welding of Pipelines and Related Facilities” (20th....307(e). (7) 2007 ASME Boiler & Pressure Vessel Code, Section IX: “Qualification Standard for Welding...

Safety and Liability.

ERIC Educational Resources Information Center

Berthelot, Ronald J.; And Others

1982-01-01

This series of five articles highlights Pensacola Junior College's occupational safety course, involving simulated emergencies, Florida's standards for teacher liability, electrical safety in the classroom and laboratory, color coding for machine safety, and Florida industrial arts safety instructional materials. (SK)

High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 7

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-04-01

This Requirements Identification Document (RID) describes an Occupational Health and Safety Program as defined through the Relevant DOE Orders, regulations, industry codes/standards, industry guidance documents and, as appropriate, good industry practice. The definition of an Occupational Health and Safety Program as specified by this document is intended to address Defense Nuclear Facilities Safety Board Recommendations 90-2 and 91-1, which call for the strengthening of DOE complex activities through the identification and application of relevant standards which supplement or exceed requirements mandated by DOE Orders. This RID applies to the activities, personnel, structures, systems, components, and programs involved in maintaining themore » facility and executing the mission of the High-Level Waste Storage Tank Farms.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrar, Sara; Rothgeb, Stacey; Polly, Ben

The U.S. Department of Energy (DOE) Building America Program enables the transformation of the U.S. housing industry to achieve energy savings through energy-efficient, high-performance homes with improved durability, comfort, and health for occupants. Building America bridges the gap between the development of emerging technologies and the adoption of codes and standards by engaging industry partners in applied research, development, and demonstration of high-performance solutions.

Recycling In The U.S. Pallet Industry: 1995

Treesearch

Robert J. Bush; Vijay S. Reddy; Matthew S Bumgardner; James L. Chamberlain; Philip A. Araman

1997-01-01

This report provides the results of a study that investigated recovery and recycling of pallets by U.S. manufacturers listed under the Standard Industrial Classification (SIC) code 2448. In Spring 1996, data were collected using a mail survey of 1,687 pallet companies across the United States. Using these data we estimated the volume and type of recycling being done by...

Overcoming Codes and Standards Barriers to Innovations in Building Energy Efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Pamala C.; Gilbride, Theresa L.

2015-02-15

In this journal article, the authors discuss approaches to overcoming building code barriers to energy-efficiency innovations in home construction. Building codes have been a highly motivational force for increasing the energy efficiency of new homes in the United States in recent years. But as quickly as the codes seem to be changing, new products are coming to the market at an even more rapid pace, sometimes offering approaches and construction techniques unthought of when the current code was first proposed, which might have been several years before its adoption by various jurisdictions. Due to this delay, the codes themselves canmore » become barriers to innovations that might otherwise be helping to further increase the efficiency, comfort, health or durability of new homes. . The U.S. Department of Energy’s Building America, a program dedicated to improving the energy efficiency of America’s housing stock through research and education, is working with the U.S. housing industry through its research teams to help builders identify and remove code barriers to innovation in the home construction industry. The article addresses several approaches that builders use to achieve approval for innovative building techniques when code barriers appear to exist.« less

Industry and Occupation in the Electronic Health Record: An Investigation of the National Institute for Occupational Safety and Health Industry and Occupation Computerized Coding System

PubMed Central

2016-01-01

Background Inclusion of information about a patient’s work, industry, and occupation, in the electronic health record (EHR) could facilitate occupational health surveillance, better health outcomes, prevention activities, and identification of workers’ compensation cases. The US National Institute for Occupational Safety and Health (NIOSH) has developed an autocoding system for “industry” and “occupation” based on 1990 Bureau of Census codes; its effectiveness requires evaluation in conjunction with promoting the mandatory addition of these variables to the EHR. Objective The objective of the study was to evaluate the intercoder reliability of NIOSH’s Industry and Occupation Computerized Coding System (NIOCCS) when applied to data collected in a community survey conducted under the Affordable Care Act; to determine the proportion of records that are autocoded using NIOCCS. Methods Standard Occupational Classification (SOC) codes are used by several federal agencies in databases that capture demographic, employment, and health information to harmonize variables related to work activities among these data sources. There are 359 industry and occupation responses that were hand coded by 2 investigators, who came to a consensus on every code. The same variables were autocoded using NIOCCS at the high and moderate criteria level. Results Kappa was .84 for agreement between hand coders and between the hand coder consensus code versus NIOCCS high confidence level codes for the first 2 digits of the SOC code. For 4 digits, NIOCCS coding versus investigator coding ranged from kappa=.56 to .70. In this study, NIOCCS was able to achieve production rates (ie, to autocode) 31%-36% of entered variables at the “high confidence” level and 49%-58% at the “medium confidence” level. Autocoding (production) rates are somewhat lower than those reported by NIOSH. Agreement between manually coded and autocoded data are “substantial” at the 2-digit level, but only “fair” to “good” at the 4-digit level. Conclusions This work serves as a baseline for performance of NIOCCS by investigators in the field. Further field testing will clarify NIOCCS effectiveness in terms of ability to assign codes and coding accuracy and will clarify its value as inclusion of these occupational variables in the EHR is promoted. PMID:26878932

Standards application and development plan for solar thermal technologies

NASA Astrophysics Data System (ADS)

Cobb, H. R. W.

1981-07-01

Functional and standards matrices, developed from input from ST users and from the industry that will be continually reviewed and updated as commercial aspects develop are presented. The matrices highlight codes, standards, test methods, functions and definitions that need to be developed. They will be submitted through ANSI for development by national consensus bodies. A contingency action is proposed for standards development if specific input is lacking at the committee level or if early development of a standard would hasten commercialization or gain needed jurisdictional acceptance.

Department of Energy Construction Safety Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-09-01

DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

Alcohol industry self-regulation: who is it really protecting?

PubMed

Noel, Jonathan; Lazzarini, Zita; Robaina, Katherine; Vendrame, Alan

2017-01-01

Self-regulation has been promoted by the alcohol industry as a sufficient means of regulating alcohol marketing activities. However, evidence suggests that the guidelines of self-regulated alcohol marketing codes are violated routinely, resulting in excessive alcohol marketing exposure to youth and the use of content that is potentially harmful to youth and other vulnerable populations. If the alcohol industry does not adhere to its own regulations the purpose and design of these codes should be questioned. Indeed, implementation of alcohol marketing self-regulation in Brazil, the United Kingdom and the United States was likely to delay statutory regulation rather than to promote public health. Moreover, current self-regulation codes suffer from vague language that may allow the industry to circumvent the guidelines, loopholes that may obstruct the implementation of the codes, lax exposure guidelines that can allow excessive youth exposure, even if properly followed, and a standard of review that may be inappropriate for protecting vulnerable populations. Greater public health benefits may be realized if legislative restrictions were applied to alcohol marketing, and strict statutory alcohol marketing regulations have been implemented and defended successfully in the European Union, with European courts declaring that restrictions on alcohol marketing are proportional to the benefits to public health. In contrast, attempts to restrict alcohol marketing activities in the United States have occurred through private litigation and have been unsuccessful. None the less, repeated violations of industry codes may provide legislators with sufficient justification to pass new legislation and for such legislation to withstand constitutional review in the United States and elsewhere. © 2016 Society for the Study of Addiction.

Countries of the World and International Organizations: Sources of Information

DTIC Science & Technology

2007-01-08

provides business addresses worldwide by geographical areas and by standard industrial classification (SIC) codes. Maps Map Catalog (New York, Tilden...Francisco. These offices are often excellent sources of free printed matter — brochures, maps, posters, etc. A directory of tourism offices worldwide is...Peterson’s Guides, Inc.). Published irregularly, these sources offer information by field of work (agriculture, business and industry , teaching English

13 CFR 121.201 - What size standards has SBA identified by North American Industry Classification System codes?

Code of Federal Regulations, 2013 CFR

2013-01-01

... footnote 1 221112 Fossil Fuel Electric Power Generation See footnote 1 221113 Nuclear Electric Power... Materials and Basic Forms and Shapes Merchant Wholesalers 100 424690 Other Chemical and Allied Products...

13 CFR 121.201 - What size standards has SBA identified by North American Industry Classification System codes?

Code of Federal Regulations, 2014 CFR

2014-01-01

... Hydroelectric Power Generation See footnote 1 221112 Fossil Fuel Electric Power Generation See footnote 1 221113... Materials and Basic Forms and Shapes Merchant Wholesalers 100 424690 Other Chemical and Allied Products...

7 CFR 51.1158 - Mature.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Citrus Industry, Part 1, Chapter 20-13 Market Classification, Maturity Standards and Processing or... 2065-S, 14th and Independence Ave., Washington, DC 20250 or at the National Archives and Records...: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. ...

Up to code: does your company's conduct meet world-class standards?

PubMed

Paine, Lynn; Deshpandé, Rohit; Margolis, Joshua D; Bettcher, Kim Eric

2005-12-01

Codes of conduct have long been a feature of corporate life. Today, they are arguably a legal necessity--at least for public companies with a presence in the United States. But the issue goes beyond U.S. legal and regulatory requirements. Sparked by corruption and excess of various types, dozens of industry, government, investor, and multisector groups worldwide have proposed codes and guidelines to govern corporate behavior. These initiatives reflect an increasingly global debate on the nature of corporate legitimacy. Given the legal, organizational, reputational, and strategic considerations, few companies will want to be without a code. But what should it say? Apart from a handful of essentials spelled out in Sarbanes-Oxley regulations and NYSE rules, authoritative guidance is sorely lacking. In search of some reference points for managers, the authors undertook a systematic analysis of a select group of codes. In this article, they present their findings in the form of a "codex," a reference source on code content. The Global Business Standards Codex contains a set of overarching principles as well as a set of conduct standards for putting those principles into practice. The GBS Codex is not intended to be adopted as is, but is meant to be used as a benchmark by those wishing to create their own world-class code. The provisions of the codex must be customized to a company's specific business and situation; individual companies' codes will include their own distinctive elements as well. What the codex provides is a starting point grounded in ethical fundamentals and aligned with an emerging global consensus on basic standards of corporate behavior.

76 FR 17163 - Submission of OMB Review; Comments Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-28

... per investor per project. Type of Respondents: Business or other institution (except farms); individuals. Standard Industrial Classification Code: All. Description of Affected Public: U.S. companies or... the document used by OPIC to determine investor's and project eligibility for political risk insurance...

7 CFR 51.767 - Mature.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Florida Citrus Industry, Part 1, Chapter 20-13 Market Classification, Maturity Standards and Processing or... 2065-S, 14th and Independence Ave., Washington, DC 20250 or at the National Archives and Records...: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. ...

76 FR 23640 - Small Business Size Standards: Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... (Ophthalmic Instruments, Equipment, and Supplies), under the North American Industry Classification System...(a) Business Development (BD) program. DATES: Comments and source information must be submitted May... under PSC 6540 (Ophthalmic Instruments, Equipment, and Supplies), under NAICS code 339115 (Ophthalmic...

Interactive QR code beautification with full background image embedding

NASA Astrophysics Data System (ADS)

Lin, Lijian; Wu, Song; Liu, Sijiang; Jiang, Bo

2017-06-01

QR (Quick Response) code is a kind of two dimensional barcode that was first developed in automotive industry. Nowadays, QR code has been widely used in commercial applications like product promotion, mobile payment, product information management, etc. Traditional QR codes in accordance with the international standard are reliable and fast to decode, but are lack of aesthetic appearance to demonstrate visual information to customers. In this work, we present a novel interactive method to generate aesthetic QR code. By given information to be encoded and an image to be decorated as full QR code background, our method accepts interactive user's strokes as hints to remove undesired parts of QR code modules based on the support of QR code error correction mechanism and background color thresholds. Compared to previous approaches, our method follows the intention of the QR code designer, thus can achieve more user pleasant result, while keeping high machine readability.

Semantic Interoperability of Health Risk Assessments

PubMed Central

Rajda, Jay; Vreeman, Daniel J.; Wei, Henry G.

2011-01-01

The health insurance and benefits industry has administered Health Risk Assessments (HRAs) at an increasing rate. These are used to collect data on modifiable health risk factors for wellness and disease management programs. However, there is significant variability in the semantics of these assessments, making it difficult to compare data sets from the output of 2 different HRAs. There is also an increasing need to exchange this data with Health Information Exchanges and Electronic Medical Records. To standardize the data and concepts from these tools, we outline a process to determine presence of certain common elements of modifiable health risk extracted from these surveys. This information is coded using concept identifiers, which allows cross-survey comparison and analysis. We propose that using LOINC codes or other universal coding schema may allow semantic interoperability of a variety of HRA tools across the industry, research, and clinical settings. PMID:22195174

C++ software quality in the ATLAS experiment: tools and experience

NASA Astrophysics Data System (ADS)

Martin-Haugh, S.; Kluth, S.; Seuster, R.; Snyder, S.; Obreshkov, E.; Roe, S.; Sherwood, P.; Stewart, G. A.

2017-10-01

In this paper we explain how the C++ code quality is managed in ATLAS using a range of tools from compile-time through to run time testing and reflect on the substantial progress made in the last two years largely through the use of static analysis tools such as Coverity®, an industry-standard tool which enables quality comparison with general open source C++ code. Other available code analysis tools are also discussed, as is the role of unit testing with an example of how the GoogleTest framework can be applied to our codebase.

Proposed new industry code on unhealthy food marketing to children and young people: will it make a difference?

PubMed

Swinburn, Boyd; Vandevijvere, Stefanie; Woodward, Alistair; Hornblow, Andrew; Richardson, Ann; Burlingame, Barbara; Borman, Barry; Taylor, Barry; Breier, Bernhard; Arroll, Bruce; Drummond, Bernadette; Grant, Cameron; Bullen, Chris; Wall, Clare; Mhurchu, Cliona Ni; Cameron-Smith, David; Menkes, David; Murdoch, David; Mangin, Dee; Lennon, Diana; Sarfati, Diana; Sellman, Doug; Rush, Elaine; Sopoaga, Faafetai; Thomson, George; Devlin, Gerry; Abel, Gillian; White, Harvey; Coad, Jane; Hoek, Janet; Connor, Jennie; Krebs, Jeremy; Douwes, Jeroen; Mann, Jim; McCall, John; Broughton, John; Potter, John D; Toop, Les; McCowan, Lesley; Signal, Louise; Beckert, Lutz; Elwood, Mark; Kruger, Marlena; Farella, Mauro; Baker, Michael; Keall, Michael; Skeaff, Murray; Thomson, Murray; Wilson, Nick; Chandler, Nicholas; Reid, Papaarangi; Priest, Patricia; Brunton, Paul; Crampton, Peter; Davis, Peter; Gendall, Philip; Howden-Chapman, Philippa; Taylor, Rachael; Edwards, Richard; Beaglehole, Robert; Doughty, Robert; Scragg, Robert; Gauld, Robin; McGee, Robert; Jackson, Rod; Hughes, Roger; Mulder, Roger; Bonita, Ruth; Kruger, Rozanne; Casswell, Sally; Derrett, Sarah; Ameratunga, Shanthi; Denny, Simon; Hales, Simon; Pullon, Sue; Wells, Susan; Cundy, Tim; Blakely, Tony

2017-02-17

Reducing the exposure of children and young people to the marketing of unhealthy foods is a core strategy for reducing the high overweight and obesity prevalence in this population. The Advertising Standards Authority (ASA) has recently reviewed its self-regulatory codes and proposed a revised single code on advertising to children. This article evaluates the proposed code against eight criteria for an effective code, which were included in a submission to the ASA review process from over 70 New Zealand health professors. The evaluation found that the proposed code largely represents no change or uncertain change from the existing codes, and cannot be expected to provide substantial protection for children and young people from the marketing of unhealthy foods. Government regulations will be needed to achieve this important outcome.

Comparison of DAC and MONACO DSMC Codes with Flat Plate Simulation

NASA Technical Reports Server (NTRS)

Padilla, Jose F.

2010-01-01

Various implementations of the direct simulation Monte Carlo (DSMC) method exist in academia, government and industry. By comparing implementations, deficiencies and merits of each can be discovered. This document reports comparisons between DSMC Analysis Code (DAC) and MONACO. DAC is NASA's standard DSMC production code and MONACO is a research DSMC code developed in academia. These codes have various differences; in particular, they employ distinct computational grid definitions. In this study, DAC and MONACO are compared by having each simulate a blunted flat plate wind tunnel test, using an identical volume mesh. Simulation expense and DSMC metrics are compared. In addition, flow results are compared with available laboratory data. Overall, this study revealed that both codes, excluding grid adaptation, performed similarly. For parallel processing, DAC was generally more efficient. As expected, code accuracy was mainly dependent on physical models employed.

47 CFR 7.9 - Information pass through.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-manufacturer, non-proprietary, industry-standard codes, translation protocols, formats or other information..., signal compression technologies shall not remove information needed for access or shall restore it upon... 47 Telecommunication 1 2010-10-01 2010-10-01 false Information pass through. 7.9 Section 7.9...

76 FR 42157 - Small Business Size Standards: Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-18

... (Ophthalmic Instruments, Equipment, and Supplies), under the North American Industry Classification System..., Service-Disabled Veteran- Owned (SDVO) small businesses, Participants in SBA's 8(a) Business Development..., Equipment, and Supplies), under NAICS code 339115 (Ophthalmic Goods Manufacturing). In response, on April 27...

The Upper Midwest Health Study: industry and occupation of glioma cases and controls.

PubMed

Ruder, Avima M; Waters, Martha A; Carreón, Tania; Butler, Mary A; Calvert, Geoffrey M; Davis-King, Karen E; Waters, Kathleen M; Schulte, Paul A; Mandel, Jack S; Morton, Roscoe F; Reding, Douglas J; Rosenman, Kenneth D

2012-09-01

Understanding glioma etiology requires determining which environmental factors are associated with glioma. Upper Midwest Health Study case-control participant work histories collected 1995-1998 were evaluated for occupational associations with glioma. "Exposures of interest" from our study protocol comprise our a priori hypotheses. Year-long or longer jobs for 1,973 participants were assigned Standard Occupational Classifications (SOC) and Standard Industrial Classifications (SIC). The analysis file includes 8,078 SIC- and SOC-coded jobs. For each individual, SAS 9.2 programs collated employment with identical SIC-SOC coding. Distributions of longest "total employment duration" (total years worked in jobs with identical industry and occupation codes, including multiple jobs, and non-consecutive jobs) were compared between cases and controls, using an industrial hygiene algorithm to group occupations. Longest employment duration was calculated for 780 cases and 1,156 controls. More case than control longest total employment duration was in the "engineer, architect" occupational group [16 cases, 10 controls, odds ratio (OR) 2.50, adjusted for age group, sex, age and education, 95% confidence interval (CI) 1.12-5.60]. Employment as a food processing worker [mostly butchers and meat cutters] was of borderline significance (27 cases, 21 controls, adjusted OR: 1.78, CI: 0.99-3.18). Among our exposures of interest work as engineers or as butchers and meat cutters was associated with increased glioma risk. Significant associations could be due to chance, because of multiple comparisons, but similar findings have been reported for other glioma studies. Our results suggest some possible associations but by themselves could not provide conclusive evidence. Copyright © 2012 Wiley Periodicals, Inc.

The Upper Midwest Health Study: Industry and Occupation of Glioma Cases and Controls

PubMed Central

Ruder, Avima M.; Waters, Martha A.; Carreón, Tania; Butler, Mary A.; Calvert, Geoffrey M.; Davis-King, Karen E.; Waters, Kathleen M.; Schulte, Paul A.; Mandel, Jack S.; Morton, Roscoe F.; Reding, Douglas J.; Rosenman, Kenneth D.

2015-01-01

Background Understanding glioma etiology requires determining which environmental factors are associated with glioma. Upper Midwest Health Study case–control participant work histories collected 1995–1998 were evaluated for occupational associations with glioma. “Exposures of interest” from our study protocol comprise our a priori hypotheses. Materials and Methods Year-long or longer jobs for 1,973 participants were assigned Standard Occupational Classifications (SOC) and Standard Industrial Classifications (SIC). The analysis file includes 8,078 SIC- and SOC-coded jobs. For each individual, SAS 9.2 programs collated employment with identical SIC-SOC coding. Distributions of longest “total employment duration” (total years worked in jobs with identical industry and occupation codes, including multiple jobs, and non-consecutive jobs) were compared between cases and controls, using an industrial hygiene algorithm to group occupations. Results Longest employment duration was calculated for 780 cases and 1,156 controls. More case than control longest total employment duration was in the “engineer, architect” occupational group [16 cases, 10 controls, odds ratio (OR) 2.50, adjusted for age group, sex, age and education, 95% confidence interval (CI) 1.12–5.60]. Employment as a food processing worker [mostly butchers and meat cutters] was of borderline significance (27 cases, 21 controls, adjusted OR: 1.78, CI: 0.99–3.18). Conclusions Among our exposures of interest work as engineers or as butchers and meat cutters was associated with increased glioma risk. Significant associations could be due to chance, because of multiple comparisons, but similar findings have been reported for other glioma studies. Our results suggest some possible associations but by themselves could not provide conclusive evidence. PMID:22715102

Chapter 2: Commercial and Industrial Lighting Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Gowans, Dakers; Telarico, Chad

The Commercial and Industrial Lighting Evaluation Protocol (the protocol) describes methods to account for gross energy savings resulting from the programmatic installation of efficient lighting equipment in large populations of commercial, industrial, and other nonresidential facilities. This protocol does not address savings resulting from changes in codes and standards, or from education and training activities. A separate Uniform Methods Project (UMP) protocol, Chapter 3: Commercial and Industrial Lighting Controls Evaluation Protocol, addresses methods for evaluating savings resulting from lighting control measures such as adding time clocks, tuning energy management system commands, and adding occupancy sensors.

Five Data Validation Cases

ERIC Educational Resources Information Center

Simkin, Mark G.

2008-01-01

Data-validation routines enable computer applications to test data to ensure their accuracy, completeness, and conformance to industry or proprietary standards. This paper presents five programming cases that require students to validate five different types of data: (1) simple user data entries, (2) UPC codes, (3) passwords, (4) ISBN numbers, and…

Clean air program : design guidelines for bus transit systems using compressed natural gas as an alternative fuel

DOT National Transportation Integrated Search

1996-06-01

This report documents design guidelines for the safe use of Compressed Natural Gas (CNG). The report is designed to provide guidance, information on safe industry practices, applicable national codes and standards, and reference data that transit age...

A Hypermedia Model for Teaching Technology.

ERIC Educational Resources Information Center

Savage, Ernest N.

Ohio's Model Industrial Technology Systems (MITS) project was initiated in 1987 to achieve the following: identify good activities in the areas of physical, communication, and bio-related technology; standardize the activities' format; and provide a coding system for their eventual use in a hypermedia system. To date, 220 activities have been…

77 FR 13061 - Electronic Reporting of Toxics Release Inventory Data

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

...--Reporting Year SIC--Standard Industrial Code TRI--Toxics Release Inventory TRI-ME--TRI-Made Easy Desktop... EPA to ``publish a uniform toxic chemical release form for facilities covered'' by the TRI Program. 42... practicable. Similarly, EPA's Cross-Media Electronic Reporting Regulation (CROMERR) (40 CFR Part 3), published...

75 FR 68394 - Small Business Size Standards: Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... Woven and Knit impregnated with Flat Dipped Rubber/Plastic Gloves. SUMMARY: The U. S. Small Business... Flat Dipped Rubber/Plastic Gloves, under North American Industry Classification System (NAICS) code... Rule for Woven and Knit impregnated with Flat Dipped Rubber/Plastic Gloves under PSC 9999...

Globalization of ASME Nuclear Codes and Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swayne, Rick; Erler, Bryan A.

2006-07-01

With the globalization of the nuclear industry, it is clear that the reactor suppliers are based in many countries around the world (such as United States, France, Japan, Canada, South Korea, South Africa) and they will be marketing their reactors to many countries around the world (such as US, China, South Korea, France, Canada, Finland, Taiwan). They will also be fabricating their components in many different countries around the world. With this situation, it is clear that the requirements of ASME Nuclear Codes and Standards need to be adjusted to accommodate the regulations, fabricating processes, and technology of various countriesmore » around the world. It is also very important for the American Society of Mechanical Engineers (ASME) to be able to assure that products meeting the applicable ASME Code requirements will provide the same level of safety and quality assurance as those products currently fabricated under the ASME accreditation process. To do this, many countries are in the process of establishing or changing their regulations, and it is important for ASME to interface with the appropriate organizations in those countries, in order to ensure there is effective use of ASME Codes and standards around the world. (authors)« less

Chapter 3: Commercial and Industrial Lighting Controls Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W.; Carlson, Stephen

This Commercial and Industrial Lighting Controls Evaluation Protocol (the protocol) describes methods to account for energy savings resulting from programmatic installation of lighting control equipment in large populations of commercial, industrial, government, institutional, and other nonresidential facilities. This protocol does not address savings resulting from changes in codes and standards, or from education and training activities. When lighting controls are installed in conjunction with a lighting retrofit project, the lighting control savings must be calculated parametrically with the lighting retrofit project so savings are not double counted.

Assessment of the Potential to Achieve very Low Energy Use in Public Buildings in China with Advanced Window and Shading Systems

DOE PAGES

Lee, Eleanor; Pang, Xiufeng; McNeil, Andrew; ...

2015-05-29

Here, as rapid growth in the construction industry continues to occur in China, the increased demand for a higher standard living is driving significant growth in energy use and demand across the country. Building codes and standards have been implemented to head off this trend, tightening prescriptive requirements for fenestration component measures using methods similar to the US model energy code American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1. The objective of this study is to (a) provide an overview of applicable code requirements and current efforts within China to enable characterization and comparison of window and shadingmore » products, and (b) quantify the load reduction and energy savings potential of several key advanced window and shading systems, given the divergent views on how space conditioning requirements will be met in the future. System-level heating and cooling loads and energy use performance were evaluated for a code-compliant large office building using the EnergyPlus building energy simulation program. Commercially-available, highly-insulating, low-emittance windows were found to produce 24-66% lower perimeter zone HVAC electricity use compared to the mandated energy-efficiency standard in force (GB 50189-2005) in cold climates like Beijing. Low-e windows with operable exterior shading produced up to 30-80% reductions in perimeter zone HVAC electricity use in Beijing and 18-38% reductions in Shanghai compared to the standard. The economic context of China is unique since the cost of labor and materials for the building industry is so low. Broad deployment of these commercially available technologies with the proper supporting infrastructure for design, specification, and verification in the field would enable significant reductions in energy use and greenhouse gas emissions in the near term.« less

Assessment of the Potential to Achieve very Low Energy Use in Public Buildings in China with Advanced Window and Shading Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Eleanor; Pang, Xiufeng; McNeil, Andrew

Here, as rapid growth in the construction industry continues to occur in China, the increased demand for a higher standard living is driving significant growth in energy use and demand across the country. Building codes and standards have been implemented to head off this trend, tightening prescriptive requirements for fenestration component measures using methods similar to the US model energy code American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1. The objective of this study is to (a) provide an overview of applicable code requirements and current efforts within China to enable characterization and comparison of window and shadingmore » products, and (b) quantify the load reduction and energy savings potential of several key advanced window and shading systems, given the divergent views on how space conditioning requirements will be met in the future. System-level heating and cooling loads and energy use performance were evaluated for a code-compliant large office building using the EnergyPlus building energy simulation program. Commercially-available, highly-insulating, low-emittance windows were found to produce 24-66% lower perimeter zone HVAC electricity use compared to the mandated energy-efficiency standard in force (GB 50189-2005) in cold climates like Beijing. Low-e windows with operable exterior shading produced up to 30-80% reductions in perimeter zone HVAC electricity use in Beijing and 18-38% reductions in Shanghai compared to the standard. The economic context of China is unique since the cost of labor and materials for the building industry is so low. Broad deployment of these commercially available technologies with the proper supporting infrastructure for design, specification, and verification in the field would enable significant reductions in energy use and greenhouse gas emissions in the near term.« less

The Vector, Signal, and Image Processing Library (VSIPL): an Open Standard for Astronomical Data Processing

NASA Astrophysics Data System (ADS)

Kepner, J. V.; Janka, R. S.; Lebak, J.; Richards, M. A.

1999-12-01

The Vector/Signal/Image Processing Library (VSIPL) is a DARPA initiated effort made up of industry, government and academic representatives who have defined an industry standard API for vector, signal, and image processing primitives for real-time signal processing on high performance systems. VSIPL supports a wide range of data types (int, float, complex, ...) and layouts (vectors, matrices and tensors) and is ideal for astronomical data processing. The VSIPL API is intended to serve as an open, vendor-neutral, industry standard interface. The object-based VSIPL API abstracts the memory architecture of the underlying machine by using the concept of memory blocks and views. Early experiments with VSIPL code conversions have been carried out by the High Performance Computing Program team at the UCSD. Commercially, several major vendors of signal processors are actively developing implementations. VSIPL has also been explicitly required as part of a recent Rome Labs teraflop procurement. This poster presents the VSIPL API, its functionality and the status of various implementations.

Building America FY 2016 Annual Report: Building America Is Driving Real Solutions in the Race to Zero Energy Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrar, Sara; Rothgeb, Stacey; Polly, Ben

The U.S. Department of Energy (DOE) Building America Program enables the transformation of the U.S. housing industry to achieve energy savings through energy-efficient, high-performance homes with improved durability, comfort, and health for occupants. Building America bridges the gap between the development of emerging technologies and the adoption of codes and standards by engaging industry partners in applied research, development, and demonstration of high-performance solutions.

Outdoor Test Facility and Related Facilities | Photovoltaic Research | NREL

Science.gov Websites

advanced or emerging photovoltaic (PV) technologies under simulated, accelerated indoor and outdoor, and evaluate prototype, pre-commercial, and commercial PV modules. One of the major roles of researchers at the OTF is to work with industry to develop uniform and consensus standards and codes for testing PV

Recommended Practices for the Safe Design and Operation of Flywheels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bender, Donald Arthur

2015-12-01

Flywheel energy storage systems are in use globally in increasing numbers . No codes pertaining specifically to flywheel energy storage exist. A number of industrial incidents have occurred. This protocol recommends a technical basis for safe flywheel de sign and operation for consideration by flywheel developers, users of flywheel systems and standards setting organizations.

13 CFR 121.201 - What size standards has SBA identified by North American Industry Classification System codes?

Code of Federal Regulations, 2010 CFR

2010-01-01

... footnote 1 221112 Fossil Fuel Electric Power Generation See footnote 1 221113 Nuclear Electric Power... 500 323115 Digital Printing 500 323116 Manifold Business Forms Printing 500 323117 Books Printing 500... 424590 Other Farm Product Raw Material Merchant Wholesalers 100 424610 Plastics Materials and Basic Forms...

13 CFR 121.201 - What size standards has SBA identified by North American Industry Classification System codes?

Code of Federal Regulations, 2012 CFR

2012-01-01

... footnote 1 221112 Fossil Fuel Electric Power Generation See footnote 1 221113 Nuclear Electric Power... 500 323115 Digital Printing 500 323116 Manifold Business Forms Printing 500 323117 Books Printing 500... Merchant Wholesalers 100 424610 Plastics Materials and Basic Forms and Shapes Merchant Wholesalers 100...

13 CFR 121.201 - What size standards has SBA identified by North American Industry Classification System codes?

Code of Federal Regulations, 2011 CFR

2011-01-01

... footnote 1 221112 Fossil Fuel Electric Power Generation See footnote 1 221113 Nuclear Electric Power... 500 323115 Digital Printing 500 323116 Manifold Business Forms Printing 500 323117 Books Printing 500... Merchant Wholesalers 100 424610 Plastics Materials and Basic Forms and Shapes Merchant Wholesalers 100...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Continuing the tradition established in prior years, this panel encompasses one of the broadest ranges of topics and issues of any panel at the Summer Study. It includes papers addressing all sectors, low-income residential to industrial, and views energy efficiency from many perspectives including programmatic, evaluation, codes, standards, legislation, technical transfer, economic development, and least-cost planning. The papers represent work being performed in most geographic regions of the United States and in the international arena, specifically Thailand, China, Europe, and Scandinavia. This delightful smorgasbord has been organized, based on general content area, into the following eight sessions: (1) new directionsmore » for low-income weatherization; (2) pursuing efficiency through legislation and standards; (3) international perspectives on energy efficiency; (4) technical transfer strategies; (5) government energy policy; (6) commercial codes and standards; (7) innovative programs; and, (8) state-of-the-art review. For these conference proceedings, individual papers are processed separately for the Energy Data Base.« less

TIGER: Turbomachinery interactive grid generation

NASA Technical Reports Server (NTRS)

Soni, Bharat K.; Shih, Ming-Hsin; Janus, J. Mark

1992-01-01

A three dimensional, interactive grid generation code, TIGER, is being developed for analysis of flows around ducted or unducted propellers. TIGER is a customized grid generator that combines new technology with methods from general grid generation codes. The code generates multiple block, structured grids around multiple blade rows with a hub and shroud for either C grid or H grid topologies. The code is intended for use with a Euler/Navier-Stokes solver also being developed, but is general enough for use with other flow solvers. TIGER features a silicon graphics interactive graphics environment that displays a pop-up window, graphics window, and text window. The geometry is read as a discrete set of points with options for several industrial standard formats and NASA standard formats. Various splines are available for defining the surface geometries. Grid generation is done either interactively or through a batch mode operation using history files from a previously generated grid. The batch mode operation can be done either with a graphical display of the interactive session or with no graphics so that the code can be run on another computer system. Run time can be significantly reduced by running on a Cray-YMP.

Use of disinfectants in open-air dairying.

PubMed

Hutchinson, R E

1995-06-01

Disinfection systems are essential in providing dairy foods which are safe for consumption by all sectors and age groups of the human population. The New Zealand dairy industry ensures quality competition under International Organisation for Standardisation (ISO) general systems standards (ISO 9002 and ISO Guide 25) and is subject to food safety assurance legislation (Dairy Industry Regulations 1990). This latter regulation requires that safe foods be produced in accordance with Product Safety Programmes approved by the Ministry of Agriculture and Fisheries. Safety can be demonstrated by compliance with the Codes of Practice of the industry. Farm dairy detergents and sanitisers must be approved for use. These disinfection systems are described.

Overview of MPEG internet video coding

NASA Astrophysics Data System (ADS)

Wang, R. G.; Li, G.; Park, S.; Kim, J.; Huang, T.; Jang, E. S.; Gao, W.

2015-09-01

MPEG has produced standards that have provided the industry with the best video compression technologies. In order to address the diversified needs of the Internet, MPEG issued the Call for Proposals (CfP) for internet video coding in July, 2011. It is anticipated that any patent declaration associated with the Baseline Profile of this standard will indicate that the patent owner is prepared to grant a free of charge license to an unrestricted number of applicants on a worldwide, non-discriminatory basis and under other reasonable terms and conditions to make, use, and sell implementations of the Baseline Profile of this standard in accordance with the ITU-T/ITU-R/ISO/IEC Common Patent Policy. Three different codecs had responded to the CfP, which are WVC, VCB and IVC. WVC was proposed jointly by Apple, Cisco, Fraunhofer HHI, Magnum Semiconductor, Polycom and RIM etc. it's in fact AVC baseline. VCB was proposed by Google, and it's in fact VP8. IVC was proposed by several Universities (Peking University, Tsinghua University, Zhejiang University, Hanyang University and Korea Aerospace University etc.) and its coding tools was developed from Zero. In this paper, we give an overview of the coding tools in IVC, and evaluate its performance by comparing it with WVC, VCB and AVC High Profile.

Modeling Guidelines for Code Generation in the Railway Signaling Context

NASA Technical Reports Server (NTRS)

Ferrari, Alessio; Bacherini, Stefano; Fantechi, Alessandro; Zingoni, Niccolo

2009-01-01

Modeling guidelines constitute one of the fundamental cornerstones for Model Based Development. Their relevance is essential when dealing with code generation in the safety-critical domain. This article presents the experience of a railway signaling systems manufacturer on this issue. Introduction of Model-Based Development (MBD) and code generation in the industrial safety-critical sector created a crucial paradigm shift in the development process of dependable systems. While traditional software development focuses on the code, with MBD practices the focus shifts to model abstractions. The change has fundamental implications for safety-critical systems, which still need to guarantee a high degree of confidence also at code level. Usage of the Simulink/Stateflow platform for modeling, which is a de facto standard in control software development, does not ensure by itself production of high-quality dependable code. This issue has been addressed by companies through the definition of modeling rules imposing restrictions on the usage of design tools components, in order to enable production of qualified code. The MAAB Control Algorithm Modeling Guidelines (MathWorks Automotive Advisory Board)[3] is a well established set of publicly available rules for modeling with Simulink/Stateflow. This set of recommendations has been developed by a group of OEMs and suppliers of the automotive sector with the objective of enforcing and easing the usage of the MathWorks tools within the automotive industry. The guidelines have been published in 2001 and afterwords revisited in 2007 in order to integrate some additional rules developed by the Japanese division of MAAB [5]. The scope of the current edition of the guidelines ranges from model maintainability and readability to code generation issues. The rules are conceived as a reference baseline and therefore they need to be tailored to comply with the characteristics of each industrial context. Customization of these recommendations has been performed for the automotive control systems domain in order to enforce code generation [7]. The MAAB guidelines have been found profitable also in the aerospace/avionics sector [1] and they have been adopted by the MathWorks Aerospace Leadership Council (MALC). General Electric Transportation Systems (GETS) is a well known railway signaling systems manufacturer leading in Automatic Train Protection (ATP) systems technology. Inside an effort of adopting formal methods within its own development process, GETS decided to introduce system modeling by means of the MathWorks tools [2], and in 2008 chose to move to code generation. This article reports the experience performed by GETS in developing its own modeling standard through customizing the MAAB rules for the railway signaling domain and shows the result of this experience with a successful product development story.

77 FR 56755 - Small Business Size Standards; Adoption of 2012 North American Industry Classification System for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-14

... #0; #0;Rules and Regulations #0; Federal Register #0; #0; #0;This section of the FEDERAL REGISTER contains regulatory documents #0;having general applicability and legal effect, most of which are keyed #0;to and codified in the Code of Federal Regulations, which is published #0;under 50 titles pursuant to...

Effects of Acoustic Impulses on the Middle Ear

DTIC Science & Technology

2015-10-01

and civilian law enforcement weapon systems, civilian recreational hunting and shooting, and industrial high-level impulsive noises (impacts and...PERSON USAMRMC a. REPORT Unclassified b. ABSTRACT Unclassified c. THIS PAGE Unclassified 19b. TELEPHONE NUMBER (include area code) Standard Form...impulsive noises (impacts and impulses). Keywords: Noise exposure; hearing loss, noise -induced; impulsive noise ; reflex; conditioned response

The world of standards: order or anarchy?

PubMed

Mason, Andrew

2011-02-01

As the development of many new standards for business continuity (BC) is seen across the globe, there is the danger that some of the benefits of developing an industry code or standard are being eroded. The very definition of the term 'standard' - a level of quality or excellence that is accepted as the norm or by which actual attainments are judged - is at risk as the proliferation and diversification of standards in existence and under development today continue to grow almost unchecked. This paper seeks to provide a personal view on the necessity of an international certifiable standard within the BC industry, with the hope that it will influence the debate in this area. In this manner, the paper contributes to the international evolution of BC. The standards related information is based on the author's experience as a member of the British Standards Institute's technical committee that developed BS25999 parts 1 and 2, and his experience in implementing both standards through to certification within his own organisation. References to the Business Continuity Institute are made not as a parochial 'British' group, but in terms of its growing development into a true global professional membership organisation.

A Code of Ethics and Standards for Outer-Space Commerce

NASA Astrophysics Data System (ADS)

Livingston, David M.

2002-01-01

Now is the time to put forth an effective code of ethics for businesses in outer space. A successful code would be voluntary and would actually promote the growth of individual companies, not hinder their efforts to provide products and services. A properly designed code of ethics would ensure the development of space commerce unfettered by government-created barriers. Indeed, if the commercial space industry does not develop its own professional code of ethics, government- imposed regulations would probably be instituted. Should this occur, there is a risk that the development of off-Earth commerce would become more restricted. The code presented in this paper seeks to avoid the imposition of new barriers to space commerce as well as make new commercial space ventures easier to develop. The proposed code consists of a preamble, which underscores basic values, followed by a number of specific principles. For the most part, these principles set forth broad commitments to fairness and integrity with respect to employees, consumers, business transactions, political contributions, natural resources, off-Earth development, designated environmental protection zones, as well as relevant national and international laws. As acceptance of this code of ethics grows within the industry, general modifications will be necessary to accommodate the different types of businesses entering space commerce. This uniform applicability will help to assure that the code will not be perceived as foreign in nature, potentially restrictive, or threatening. Companies adopting this code of ethics will find less resistance to their space development plans, not only in the United States but also from nonspacefaring nations. Commercial space companies accepting and refining this code would demonstrate industry leadership and an understanding that will serve future generations living, working, and playing in space. Implementation of the code would also provide an off-Earth precedent for a modified free-market economy. With the code as a backdrop, a colonial or Wild West mentality would become less likely. Off-Earth resources would not be as susceptible to plunder and certain areas could be designated as environmental reserves for the benefit of all. Companies would find it advantageous to balance the goal of wealth maximization with ethical principles if such a strategy enhances the long-term prospects for success.

Industrial Code Development

NASA Technical Reports Server (NTRS)

Shapiro, Wilbur

1991-01-01

The industrial codes will consist of modules of 2-D and simplified 2-D or 1-D codes, intended for expeditious parametric studies, analysis, and design of a wide variety of seals. Integration into a unified system is accomplished by the industrial Knowledge Based System (KBS), which will also provide user friendly interaction, contact sensitive and hypertext help, design guidance, and an expandable database. The types of analysis to be included with the industrial codes are interfacial performance (leakage, load, stiffness, friction losses, etc.), thermoelastic distortions, and dynamic response to rotor excursions. The first three codes to be completed and which are presently being incorporated into the KBS are the incompressible cylindrical code, ICYL, and the compressible cylindrical code, GCYL.

Computer-based coding of free-text job descriptions to efficiently identify occupations in epidemiological studies.

PubMed

Russ, Daniel E; Ho, Kwan-Yuet; Colt, Joanne S; Armenti, Karla R; Baris, Dalsu; Chow, Wong-Ho; Davis, Faith; Johnson, Alison; Purdue, Mark P; Karagas, Margaret R; Schwartz, Kendra; Schwenn, Molly; Silverman, Debra T; Johnson, Calvin A; Friesen, Melissa C

2016-06-01

Mapping job titles to standardised occupation classification (SOC) codes is an important step in identifying occupational risk factors in epidemiological studies. Because manual coding is time-consuming and has moderate reliability, we developed an algorithm called SOCcer (Standardized Occupation Coding for Computer-assisted Epidemiologic Research) to assign SOC-2010 codes based on free-text job description components. Job title and task-based classifiers were developed by comparing job descriptions to multiple sources linking job and task descriptions to SOC codes. An industry-based classifier was developed based on the SOC prevalence within an industry. These classifiers were used in a logistic model trained using 14 983 jobs with expert-assigned SOC codes to obtain empirical weights for an algorithm that scored each SOC/job description. We assigned the highest scoring SOC code to each job. SOCcer was validated in 2 occupational data sources by comparing SOC codes obtained from SOCcer to expert assigned SOC codes and lead exposure estimates obtained by linking SOC codes to a job-exposure matrix. For 11 991 case-control study jobs, SOCcer-assigned codes agreed with 44.5% and 76.3% of manually assigned codes at the 6-digit and 2-digit level, respectively. Agreement increased with the score, providing a mechanism to identify assignments needing review. Good agreement was observed between lead estimates based on SOCcer and manual SOC assignments (κ 0.6-0.8). Poorer performance was observed for inspection job descriptions, which included abbreviations and worksite-specific terminology. Although some manual coding will remain necessary, using SOCcer may improve the efficiency of incorporating occupation into large-scale epidemiological studies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

High Temperature Gas Reactors: Assessment of Applicable Codes and Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDowell, Bruce K.; Nickolaus, James R.; Mitchell, Mark R.

2011-10-31

Current interest expressed by industry in HTGR plants, particularly modular plants with power up to about 600 MW(e) per unit, has prompted NRC to task PNNL with assessing the currently available literature related to codes and standards applicable to HTGR plants, the operating history of past and present HTGR plants, and with evaluating the proposed designs of RPV and associated piping for future plants. Considering these topics in the order they are arranged in the text, first the operational histories of five shut-down and two currently operating HTGR plants are reviewed, leading the authors to conclude that while small, simplemore » prototype HTGR plants operated reliably, some of the larger plants, particularly Fort St. Vrain, had poor availability. Safety and radiological performance of these plants has been considerably better than LWR plants. Petroleum processing plants provide some applicable experience with materials similar to those proposed for HTGR piping and vessels. At least one currently operating plant - HTR-10 - has performed and documented a leak before break analysis that appears to be applicable to proposed future US HTGR designs. Current codes and standards cover some HTGR materials, but not all materials are covered to the high temperatures envisioned for HTGR use. Codes and standards, particularly ASME Codes, are under development for proposed future US HTGR designs. A 'roadmap' document has been prepared for ASME Code development; a new subsection to section III of the ASME Code, ASME BPVC III-5, is scheduled to be published in October 2011. The question of terminology for the cross-duct structure between the RPV and power conversion vessel is discussed, considering the differences in regulatory requirements that apply depending on whether this structure is designated as a 'vessel' or as a 'pipe'. We conclude that designing this component as a 'pipe' is the more appropriate choice, but that the ASME BPVC allows the owner of the facility to select the preferred designation, and that either designation can be acceptable.« less

Prevalence of workers with shifts in hearing by industry: a comparison of OSHA and NIOSH Hearing Shift Criteria.

PubMed

Masterson, Elizabeth A; Sweeney, Marie Haring; Deddens, James A; Themann, Christa L; Wall, David K

2014-04-01

The purpose of this study was to compare the prevalence of workers with National Institute for Occupational Safety and Health significant threshold shifts (NSTS), Occupational Safety and Health Administration standard threshold shifts (OSTS), and with OSTS with age correction (OSTS-A), by industry using North American Industry Classification System codes. From 2001 to 2010, worker audiograms were examined. Prevalence and adjusted prevalence ratios for NSTS were estimated by industry. NSTS, OSTS, and OSTS-A prevalences were compared by industry. Twenty percent of workers had an NSTS, 14% had an OSTS, and 6% had an OSTS-A. For most industries, the OSTS and OSTS-A criteria identified 28% to 36% and 66% to 74% fewer workers than the NSTS criteria, respectively. Use of NSTS criteria allowing for earlier detection of shifts in hearing is recommended for improved prevention of occupational hearing loss.

Prevalence of Workers with Shifts in Hearing by Industry: A Comparison of OSHA and NIOSH Hearing Shift Criteria

PubMed Central

Masterson, Elizabeth A.; Sweeney, Marie Haring; Deddens, James A.; Themann, Christa L.; Wall, David K.

2015-01-01

Objective The purpose of this study was to compare the prevalence of workers with National Institute for Occupational Safety and Health significant threshold shifts (NSTS), Occupational Safety and Health Administration standard threshold shifts (OSTS), and with OSTS with age correction (OSTS-A), by industry using North American Industry Classification System codes. Methods 2001-2010 worker audiograms were examined. Prevalence and adjusted prevalence ratios for NSTS were estimated by industry. NSTS, OSTS and OSTS-A prevalences were compared by industry. Results 20% of workers had an NSTS, 14% had an OSTS and 6% had an OSTS-A. For most industries, the OSTS and OSTS-A criteria identified 28-36% and 66-74% fewer workers than the NSTS criteria, respectively. Conclusions Use of NSTS criteria allowing for earlier detection of shifts in hearing is recommended for improved prevention of occupational hearing loss. PMID:24662953

Project Cerberus: tobacco industry strategy to create an alternative to the Framework Convention on Tobacco Control.

PubMed

Mamudu, Hadii M; Hammond, Ross; Glantz, Stanton A

2008-09-01

Between 1999 and 2001, British American Tobacco, Philip Morris, and Japan Tobacco International executed Project Cerberus to develop a global voluntary regulatory regime as an alternative to the Framework Convention on Tobacco Control (FCTC). They aimed to develop a global voluntary regulatory code to be overseen by an independent audit body and to focus attention on youth smoking prevention. The International Tobacco Products Marketing Standards announced in September 2001, however, did not have the independent audit body. Although the companies did not stop the FCTC, they continue to promote the International Tobacco Products Marketing Standards youth smoking prevention as an alternative to the FCTC. Public health civil society groups should help policymakers and governments understand the importance of not working with the tobacco industry.

Project Cerberus: Tobacco Industry Strategy to Create an Alternative to the Framework Convention on Tobacco Control

PubMed Central

Mamudu, Hadii M.; Hammond, Ross; Glantz, Stanton A.

2008-01-01

Between 1999 and 2001, British American Tobacco, Philip Morris, and Japan Tobacco International executed Project Cerberus to develop a global voluntary regulatory regime as an alternative to the Framework Convention on Tobacco Control (FCTC). They aimed to develop a global voluntary regulatory code to be overseen by an independent audit body and to focus attention on youth smoking prevention. The International Tobacco Products Marketing Standards announced in September 2001, however, did not have the independent audit body. Although the companies did not stop the FCTC, they continue to promote the International Tobacco Products Marketing Standards youth smoking prevention as an alternative to the FCTC. Public health civil society groups should help policymakers and governments understand the importance of not working with the tobacco industry. PMID:18633079

Guide to Canadian Aerospace Related Industries,

DTIC Science & Technology

1986-02-28

Contract with Environmental Research and Code: ANA Development (US). Address: 240 Brooksbank Ave Digital Radar - Contract with Fundacao Educacional ...range from coal ings. The company is especially well known for its innovative engi- mining (methane) applications in Gillette, Wyoming to carbon...an order of magnitude higher than those provided by Atlantis also offers R&D and manufacturing services, especially standard tunnel diode pulse

Sweat or no sweat: foreign workers in the garment industry in Malaysia.

PubMed

Crinis, Vicki

2010-01-01

In the last decade factory owners, in response to brand-name Corporate Social Responsibility (CSR) parameters, have joined associations that verify (through a monitoring and audit system) that management does not exploit labour. There have been no reports of violations of codes of conduct concerning Malaysian workers but for foreign workers on contract there are certain areas that have been reported. These areas, including trade union membership, the withholding of workers' passports and unsuitable accommodation, generally escape notice because auditors who monitor factory compliance do not question the terms of contracts as long as they comply with national labour standards. This paper is based on research with foreign workers in Malaysia and argues that despite the success of the anti-sweatshop movement in a global context, the neo-liberal state in Malaysia continues to place certain restrictions on transnational labour migrants which breach garment industry codes of conduct. Available evidence does not support the assumption that CSR practices provide sufficient protection for both citizen and foreign workers on contract in the garment industry.

Hoisting and Rigging (Formerly Hoisting and Rigging Manual)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

This standard is intended as a reference document to be used by supervisors, line managers, safety personnel, equipment operators, and any other personnel responsible for safety of hoisting and rigging operations at DOE sites. It quotes or paraphrases the US OSHA and ANSI requirements. It also encompasses, under one cover,hoisting and rigging requirements, codes, standards, and regulations, eliminating the need to maintain extensive (and often incomplete) libraries of hoisting and rigging standards throughout DOE. The standard occasionally goes beyond the minimum general industry standards established by OSHA and ANSI, and also delineates the more stringent requirements necessary to accomplish themore » complex, diversified, critical, and often hazardous hoisting and rigging work found with the DOE complex.« less

Study on Standard Fatigue Vehicle Load Model

NASA Astrophysics Data System (ADS)

Huang, H. Y.; Zhang, J. P.; Li, Y. H.

2018-02-01

Based on the measured data of truck from three artery expressways in Guangdong Province, the statistical analysis of truck weight was conducted according to axle number. The standard fatigue vehicle model applied to industrial areas in the middle and late was obtained, which adopted equivalence damage principle, Miner linear accumulation law, water discharge method and damage ratio theory. Compared with the fatigue vehicle model Specified by the current bridge design code, the proposed model has better applicability. It is of certain reference value for the fatigue design of bridge in China.

Review of the probabilistic failure analysis methodology and other probabilistic approaches for application in aerospace structural design

NASA Technical Reports Server (NTRS)

Townsend, J.; Meyers, C.; Ortega, R.; Peck, J.; Rheinfurth, M.; Weinstock, B.

1993-01-01

Probabilistic structural analyses and design methods are steadily gaining acceptance within the aerospace industry. The safety factor approach to design has long been the industry standard, and it is believed by many to be overly conservative and thus, costly. A probabilistic approach to design may offer substantial cost savings. This report summarizes several probabilistic approaches: the probabilistic failure analysis (PFA) methodology developed by Jet Propulsion Laboratory, fast probability integration (FPI) methods, the NESSUS finite element code, and response surface methods. Example problems are provided to help identify the advantages and disadvantages of each method.

Proceedings: Nozzle Initiative Industry Advisory Committee on standardization of carbon-phenolic test methods and specifications

NASA Technical Reports Server (NTRS)

Hall, William B.

1992-01-01

Verbal discussions during the biannual meeting of the Industry Advisory Committee for Carbon-phenolic constituent test methodology, which is constituted under the Solid Propulsion Integrity Program (SPIP), are addressed. The items on the agenda are: (1) NASA video tape library; (2) product code identification; (3) NMR progress; (4) IR and DMTA workshop; (5) aerospace database update; (6) M vision database demonstration; (7) constituent fingerprinting; (8) cured materials test development; (9) engineering needs for computer modeling; and (10) review action items. The materials prepared to support some of the oral presentations are also included in the Appendix.

A qualitative phenomenological study: Enhanced, risk-based FAA oversight on part 145 maintenance practices

NASA Astrophysics Data System (ADS)

Sheehan, Bryan G.

The purpose of this qualitative phenomenological study was to examine the phenomenon of enhanced, risk-based Federal Aviation Administration (FAA) oversight of Part 145 repair stations that performed aircraft maintenance for Part 121 air carriers between 2007 and 2014 in Oklahoma. Specifically, this research was utilized to explore what operational changes have occurred in the domestic Part 145 repair station industry such as variations in management or hiring practices, training, recordkeeping and technical data, inventory and aircraft parts supply-chain logistics, equipment, and facilities. After interviewing 12 managers from Part 145 repair stations in Oklahoma, six major theme codes emerged from the data: quality of oversight before 2007, quality of oversight after 2007, advantages of oversight, disadvantages of oversight, status quo of oversight, and process improvement . Of those six major theme codes, 17 subthemes appeared from the data that were used to explain the phenomenon of enhanced oversight in the Part 145 repair station industry. Forty-two percent of the participants indicated a weak FAA oversight system that has hindered the continuous process improvement program in their repair stations. Some of them were financially burdened after hiring additional full-time quality assurance inspectors to specifically manage enhanced FAA oversight. Notwithstanding, the participants of the study indicated that the FAA must apply its surveillance on a more standardized and consistent basis. They want to see this standardization in how FAA inspectors interpret regulations and practice the same quality of oversight for all repair stations, particularly those that are repeat violators and fail to comply with federal aviation regulations. They believed that when the FAA enforces standardization on a consistent basis, repair stations can become more efficient and safer in the performance of their scope of work for the U.S. commercial air transportation industry.

Watermarking spot colors in packaging

NASA Astrophysics Data System (ADS)

Reed, Alastair; Filler, TomáÅ.¡; Falkenstern, Kristyn; Bai, Yang

2015-03-01

In January 2014, Digimarc announced Digimarc® Barcode for the packaging industry to improve the check-out efficiency and customer experience for retailers. Digimarc Barcode is a machine readable code that carries the same information as a traditional Universal Product Code (UPC) and is introduced by adding a robust digital watermark to the package design. It is imperceptible to the human eye but can be read by a modern barcode scanner at the Point of Sale (POS) station. Compared to a traditional linear barcode, Digimarc Barcode covers the whole package with minimal impact on the graphic design. This significantly improves the Items per Minute (IPM) metric, which retailers use to track the checkout efficiency since it closely relates to their profitability. Increasing IPM by a few percent could lead to potential savings of millions of dollars for retailers, giving them a strong incentive to add the Digimarc Barcode to their packages. Testing performed by Digimarc showed increases in IPM of at least 33% using the Digimarc Barcode, compared to using a traditional barcode. A method of watermarking print ready image data used in the commercial packaging industry is described. A significant proportion of packages are printed using spot colors, therefore spot colors needs to be supported by an embedder for Digimarc Barcode. Digimarc Barcode supports the PANTONE spot color system, which is commonly used in the packaging industry. The Digimarc Barcode embedder allows a user to insert the UPC code in an image while minimizing perceptibility to the Human Visual System (HVS). The Digimarc Barcode is inserted in the printing ink domain, using an Adobe Photoshop plug-in as the last step before printing. Since Photoshop is an industry standard widely used by pre-press shops in the packaging industry, a Digimarc Barcode can be easily inserted and proofed.

Codes of environmental management practice: Assessing their potential as a tool for change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nash, J.; Ehrenfeld, J.

1997-12-31

Codes of environmental management practice emerged as a tool of environmental policy in the late 1980s. Industry and other groups have developed codes for two purposes: to change the environmental behavior of participating firms and to increase public confidence in industry`s commitment to environmental protection. This review examines five codes of environmental management practice: Responsible Care, the International Chamber of Commerce`s Business Charter for Sustainable Development, ISO 14000, the CERES Principles, and The Natural Step. The first three codes have been drafted and promoted primarily by industry; the others have been developed by non-industry groups. These codes have spurred participatingmore » firms to introduce new practices, including the institution of environmental management systems, public environmental reporting, and community advisory panels. The extent to which codes are introducing a process of cultural change is considered in terms of four dimensions: new consciousness, norms, organization, and tools. 94 refs., 3 tabs.« less

Understanding the Perception of Very Small Software Companies towards the Adoption of Process Standards

NASA Astrophysics Data System (ADS)

Basri, Shuib; O'Connor, Rory V.

This paper is concerned with understanding the issues that affect the adoption of software process standards by Very Small Entities (VSEs), their needs from process standards and their willingness to engage with the new ISO/IEC 29110 standard in particular. In order to achieve this goal, a series of industry data collection studies were undertaken with a collection of VSEs. A twin track approach of a qualitative data collection (interviews and focus groups) and quantitative data collection (questionnaire) were undertaken. Data analysis was being completed separately and the final results were merged, using the coding mechanisms of grounded theory. This paper serves as a roadmap for both researchers wishing to understand the issues of process standards adoption by very small companies and also for the software process standards community.

Computational fluid dynamics of airfoils and wings

NASA Technical Reports Server (NTRS)

Garabedian, P.; Mcfadden, G.

1982-01-01

It is pointed out that transonic flow is one of the fields where computational fluid dynamics turns out to be most effective. Codes for the design and analysis of supercritical airfoils and wings have become standard tools of the aircraft industry. The present investigation is concerned with mathematical models and theorems which account for some of the progress that has been made. The most successful aerodynamics codes are those for the analysis of flow at off-design conditions where weak shock waves appear. A major breakthrough was achieved by Murman and Cole (1971), who conceived of a retarded difference scheme which incorporates artificial viscosity to capture shocks in the supersonic zone. This concept has been used to develop codes for the analysis of transonic flow past a swept wing. Attention is given to the trailing edge and the boundary layer, entropy inequalities and wave drag, shockless airfoils, and the inverse swept wing code.

Commercial/industrial photovoltaic module and array requirement study. Low-cost solar array project engineering area

NASA Technical Reports Server (NTRS)

1981-01-01

Design requirements for photovoltaic modules and arrays used in commercial and industrial applications were identified. Building codes and referenced standards were reviewed for their applicability to commercial and industrial photovoltaic array installation. Four general installation types were identified - integral (replaces roofing), direct (mounted on top of roofing), stand-off (mounted away from roofing), and rack (for flat or low slope roofs, or ground mounted). Each of the generic mounting types can be used in vertical wall mounting systems. This implies eight mounting types exist in the commercial/industrial sector. Installation costs were developed for these mounting types as a function of panel/module size. Cost drivers were identified. Studies were performed to identify optimum module shapes and sizes and operating voltage cost drivers. The general conclusion is that there are no perceived major obstacles to the use of photovoltaic modules in commercial/industrial arrays.

Oil and gas field code master list 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This is the thirteenth annual edition of the Energy Information Administration`s (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1994 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. The master field name spellings and codes are to be used by respondents when filing the following Department of Energy (DOE) forms: Form EIA-23, {open_quotes}Annual Survey of Domestic Oil and Gas Reserves,{close_quotes} filed by oil and gas well operators (field codes are required from larger operators only); Forms FERC 8 and EIA-191, {open_quotes}Underground Gas Storagemore » Report,{close_quotes} filed by natural gas producers and distributors who operate underground natural gas storage facilities. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service, 5285 Port Royal Road, Springfield, Virginia 22161, (703) 487-4650. In order for the Master List to be useful, it must be accurate and remain current. To accomplish this, EIA constantly reviews and revises this list. The EIA welcomes all comments, corrections, and additions to the Master List. All such information should be given to the EIA Field Code Coordinator at (214) 953-1858. EIA gratefully acknowledges the assistance provides by numerous State organizations and trade associations in verifying the existence of fields and their official nomenclature.« less

Managing perceived conflicts of interest while ensuring the continued innovation of medical technology.

PubMed

Van Haute, Andrew

2011-09-01

If it were not for the ongoing collaboration between vascular surgeons and the medical technology industry, many of these advanced treatments used every day in vascular interventional surgery would not exist. The flip side of this coin is that these vital relationships create multiple roles for surgeons and must be appropriately managed. The dynamic process of innovation, along with factors such as product delivery technique refinement, education, testing and clinical trials, and product support, all make it necessary for ongoing and close collaboration between surgeons and the device industry. This unique relationship sometimes leads to the perception of conflicts of interest for physicians, in part because the competing pressures from the multiple, overlapping roles as clinician/caregiver/investigator/innovator/customer are significant. To address this issue, the Advanced Medical Technology Association (AdvaMed), the nation's largest medical technology association representing medical device and diagnostics companies, developed a Code of Ethics to guide medical technology companies in their interactions with health care professionals. First introduced in 1993, the AdvaMed Code strongly encourages both industry and physicians to commit to openness and high ethical standards in the conduct of their business interactions. The AdvaMed Code addresses many of the types of interactions that can occur between companies and health care professionals, including training, consulting agreements, the provision of demonstration and evaluation units, and charitable donations. By following the Code, companies send a strong message that treatment decisions must always be based on the best interest of the patient. Copyright © 2011. Published by Mosby, Inc.

DEVELOPMENT OF PERMANENT MECHANICAL REPAIR SLEEVE FOR PLASTIC PIPE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hitesh Patadia

2004-09-30

The report presents a comprehensive summary of the project status related to the development of a permanent mechanical repair fitting intended to be installed on damaged PE mains under blowing gas conditions. Specifically, the product definition has been developed taking into account relevant codes and standards and industry input. A conceptual design for the mechanical repair sleeve has been developed which meets the product definition.

The case of the high-risk safety product.

PubMed

Chew, W B; Blodgett, T B; Wallin, W R; Meyers, G C; Holden, B; Johnson, E W; Smith, N C; Ducker, W

1992-01-01

After several days of meetings, J.F. Winchester, president of MDC Industries, felt no closer to a decision. MDC, a manufacturer of wall and ceiling panels, was considering whether to exercise an option to buy a new and safer wallboard technology. The product was being touted as revolutionary, but, Winchester wondered, could MDC afford to carry the flag? According to its inventor, Robert Goerner, Smoke-Safe would be a vast improvement over standard safety-rated wallboard. With almost the same flame-retardant properties, Smoke-Safe had the advantage of giving off almost no fumes or smoke in fire tests. And, Winchester knew, most fire-related deaths are from smoke, not flames. Indeed, the numbers were grimly persuasive: 82% of fire-related injuries involving standard panels were caused by smoke inhalation. What's more, Smoke-Safe would cost about the same to manufacture as MDC's current wallboard. But MDC had several other good options for spending the $5 million Goerner was asking; building plastics was only one of its profit centers. And the prospect of launching a campaign to change building codes in order to market Smoke-Safe, which could spark a fight with competitors, was daunting. Since its current wallboard gave MDC only 18% of the wallboard market, many industry insiders speculated whether MDC had the market clout to influence major cities to revise their codes. Six experts in marketing, law, and ethics advise MDC Industries on how it can balance ethical and business imperatives in making its decision.

Quantifying solid waste and recycling employment in Florida, USA: Trends in public and private sectors.

PubMed

Park, Sunjoo; Yi, Hongtao; Feiock, Richard C

2015-12-01

Measuring and tracking the numbers of jobs in solid waste management and recycling industries over time provide basic data to inform decision makers about the important role played by this sector in a state or region's 'green economy'. This study estimates the number of people employed in the solid waste and recycling industry from 1989 through 2011 in the state of Florida (USA), applying a classification scheme based on the Standard Industrial Code (SIC) and utilizing the National Establishment Time Series (NETS) database. The results indicate that solid waste and recycling jobs in the private sector steadily increased from 1989 to 2011, whereas government employment for solid waste management fluctuated over the same period. © The Author(s) 2015.

Charliecloud: Unprivileged containers for user-defined software stacks in HPC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Priedhorsky, Reid; Randles, Timothy C.

Supercomputing centers are seeing increasing demand for user-defined software stacks (UDSS), instead of or in addition to the stack provided by the center. These UDSS support user needs such as complex dependencies or build requirements, externally required configurations, portability, and consistency. The challenge for centers is to provide these services in a usable manner while minimizing the risks: security, support burden, missing functionality, and performance. We present Charliecloud, which uses the Linux user and mount namespaces to run industry-standard Docker containers with no privileged operations or daemons on center resources. Our simple approach avoids most security risks while maintaining accessmore » to the performance and functionality already on offer, doing so in less than 500 lines of code. Charliecloud promises to bring an industry-standard UDSS user workflow to existing, minimally altered HPC resources.« less

New ethical code reflects expectations for industry behavior.

PubMed

Bailey, Pamela G

2005-07-01

Sporadic misbehavior, suspect sales and marketing practices, and the perceived deep pockets of the health care industry have put corporations and physicians alike at risk for investigation for fraud and abuse misconduct. The Advanced Medical Technology Association's (AdvaMed) Code of Ethics on Interactions with Healthcare Professionals addresses interactions between the technology industry and physicians, recommending appropriate behavior for partners engaged in developing, testing, learning, and applying often complex technical innovations. As this discussion shows, AdvaMed's industry code underscores uniformity between the drug and technology industries where similarities exist yet sets a distinct course where the needs of the two industries diverge. Health care professionals must be keenly aware of the differences and similarities of the overlapping codes of conducts. Provisions for allowable financial support for third-party conferences, sales and promotional meetings, industry-sponsored educational and training meetings, consulting arrangements, gifts to physicians, reimbursement for technical information, and charitable donations are all examined within the AdvaMed code of ethics and compared against codes and compliance guidance adopted by the American Medical Association; the Pharmaceutical Research and Manufacturers of America; and the US Department of Health and Human Services; Office of Inspector General.

Medication monitoring and drug testing ethics project.

PubMed

Payne, Richard; Moe, Jeffrey L; Sevier, Catherine Harvey; Sevier, David; Waitzkin, Michael

2015-01-01

In 2012, Duke University initiated a research project, funded by an unrestricted research grant from Millennium Laboratories, a drug testing company. The project focused on assessing the frequency and nature of questionable, unethical, and illegal business practices in the clinical drug testing industry and assessing the potential for establishing a business code of ethics. Laboratory leaders, clinicians, industry attorneys, ethicists, and consultants participated in the survey, were interviewed, and attended two face-to-face meetings to discuss a way forward. The study demonstrated broad acknowledgment of variations in the legal and regulatory environment, resulting in inconsistent enforcement of industry practices. Study participants expressed agreement that overtly illegal practices sometimes exist, particularly when laboratory representatives and clinicians discuss reimbursement, extent of testing, and potential business incentives with medical practitioners. Most respondents reported directly observing probable violations involving marketing materials, contracts, or, in the case of some individuals, directly soliciting people with offers of clinical supplies and other "freebies." While many study respondents were skeptical that voluntary standards alone would eliminate questionable business practices, most viewed ethics codes and credentialing as an important first step that could potentially mitigate uneven enforcement, while improving quality of care and facilitating preferred payment options for credentialed parties. Many were willing to participate in future discussions and industry-wide initiatives to improve the environment.

Evaluation in industry of a draft code of practice for manual handling.

PubMed

Ashby, Liz; Tappin, David; Bentley, Tim

2004-05-01

This paper reports findings from a study which evaluated the draft New Zealand Code of Practice for Manual Handling. The evaluation assessed the ease of use, applicability and validity of the Code and in particular the associated manual handling hazard assessment tools, within New Zealand industry. The Code was studied in a sample of eight companies from four sectors of industry. Subjective feedback and objective findings indicated that the Code was useful, applicable and informative. The manual handling hazard assessment tools incorporated in the Code could be adequately applied by most users, with risk assessment outcomes largely consistent with the findings of researchers using more specific ergonomics methodologies. However, some changes were recommended to the risk assessment tools to improve usability and validity. The evaluation concluded that both the Code and the tools within it would benefit from simplification, improved typography and layout, and industry-specific information on manual handling hazards.

The HR factor: codes of conduct and gender issues as levers of innovation in geosciences

NASA Astrophysics Data System (ADS)

Rubbia, Giuliana

2014-05-01

Professional geosciences organizations which support governments, industry and academic institutions in setting standards for communication, responsible use of geosciences information and continuing professional development do have codes of professional conduct, binding their members. "The geologist is responsible for the impression he gives of his profession in the opinion of those around him and of the public at large" reads one principle of the Code of Professional Conduct of the European Federation of Geologists. Several higher education institutions and public research bodies inspire their regulations to the European Charter of Researchers. In strengthening the relationships of professional organizations with industry, society and academy, it becomes interesting to highlight similarities and fruitful points of contacts between codes of professional ethics and the Charter of Researchers. Ethical principles, professional responsibility and attitude, accountability, dissemination and exploitation of results, public engagement, continuing professional development are some of the remarkable principles. Gender issues are also vital, as starting point to rethink processes in the knowledge society. Structural changes in institutions to improve excellence in research need more women in decision-making bodies, practices of work-family balance and codes of conduct which prevent hidden discriminations. In communication of natural hazards that have societal impact, the diversity management of both target public and communicators can make the difference between a generic communication and an effective one which is more tailored to information needs of women and men acting in the society.

Development of ENDF/B-IV multigroup neutron cross-section libraries for the LEOPARD and LASER codes. Technical report on Phase 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jenquin, U.P.; Stewart, K.B.; Heeb, C.M.

1975-07-01

The principal aim of this neutron cross-section research is to provide the utility industry with a 'standard nuclear data base' that will perform satisfactorily when used for analysis of thermal power reactor systems. EPRI is coordinating its activities with those of the Cross Section Evaluation Working Group (CSEWG), responsible for the development of the Evaluated Nuclear Data File-B (ENDF/B) library, in order to improve the performance of the ENDF/B library in thermal reactors and other applications of interest to the utility industry. Battelle-Northwest (BNW) was commissioned to process the ENDF/B Version-4 data files into a group-constant form for use inmore » the LASER and LEOPARD neutronics codes. Performance information on the library should provide the necessary feedback for improving the next version of the library, and a consistent data base is expected to be useful in intercomparing the versions of the LASER and LEOPARD codes presently being used by different utility groups. This report describes the BNW multi-group libraries and the procedures followed in their preparation and testing. (GRA)« less

Oil and gas field code master list 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The Oil and Gas Field Code Master List 1997 is the sixteenth annual listing of all identified oil and gas fields in the US. It is updated with field information collected through October 1997. The purpose of this publication is to provide unique, standardized codes for identification of domestic fields. Use of these field codes fosters consistency of field identification by government and industry. As a result of their widespread adoption they have in effect become a national standard. The use of field names and codes listed in this publication is required on survey forms and other reports regarding field-specificmore » data collected by EIA. There are 58,366 field records in this year`s FCML, 437 more than last year. The FCML includes: field records for each State and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides; field records for each alias field name (definition of alias is listed); fields crossing State boundaries that may be assigned different names by the respective State naming authorities. This report also contains an Invalid Field Record List of 4 records that have been removed from the FCML since last year`s report. These records were found to be either technically incorrect or to represent field names which were never recognized by State naming authorities.« less

Alternative Fuels Data Center: Codes and Standards Resources

Science.gov Websites

codes and standards. Biodiesel Vehicle and Infrastructure Codes and Standards Chart Electric Vehicle and Infrastructure Codes and Standards Chart Ethanol Vehicle and Infrastructure Codes and Standards Chart Natural Gas Vehicle and Infrastructure Codes and Standards Chart Propane Vehicle and Infrastructure Codes and

Energy Efficiency in India: Challenges and Initiatives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ajay Mathur

May 13, 2010 EETD Distinguished Lecture: Ajay Mathur is Director General of the Bureau of Energy Efficiency, and a member of the Prime Minister's Council on Climate Change. As Director General of BEE, Dr. Mathur coordinates the national energy efficiency programme, including the standards and labeling programme for equipment and appliances; the energy conservation building code; the industrial energy efficiency programme, and the DSM programmes in the buildings, lighting, and municipal sectors.

Energy Efficiency in India: Challenges and Initiatives

ScienceCinema

Ajay Mathur

2017-12-09

May 13, 2010 EETD Distinguished Lecture: Ajay Mathur is Director General of the Bureau of Energy Efficiency, and a member of the Prime Minister's Council on Climate Change. As Director General of BEE, Dr. Mathur coordinates the national energy efficiency programme, including the standards and labeling programme for equipment and appliances; the energy conservation building code; the industrial energy efficiency programme, and the DSM programmes in the buildings, lighting, and municipal sectors.

Does industry self-regulation protect young people from exposure to alcohol marketing? A review of compliance and complaint studies.

PubMed

Noel, Jonathan K; Babor, Thomas F

2017-01-01

Exposure to alcohol marketing is considered to be potentially harmful to adolescents. In addition to statutory regulation, industry self-regulation is a common way to protect adolescents from alcohol marketing exposures. This paper critically reviews research designed to evaluate the effectiveness of the alcohol industry's compliance procedures to manage complaints when alcohol marketing is considered to have violated a self-regulatory code. Peer-reviewed papers were identified through four literature search engines: PubMed, SCOPUS, PsychINFO and CINAHL. Non-peer-reviewed reports produced by public health agencies, alcohol research centers, non-governmental organizations, government research centers and national industry advertising associations were also included. The search process yielded three peer-reviewed papers, seven non-peer reviewed reports published by academic institutes and non-profit organizations and 20 industry reports. The evidence indicates that the complaint process lacks standardization across countries, industry adjudicators may be trained inadequately or biased and few complaints are upheld against advertisements pre-determined to contain violations of a self-regulatory code. The current alcohol industry marketing complaint process used in a wide variety of countries may be ineffective at removing potentially harmful content from the market-place. The process of determining the validity of complaints employed by most industry groups appears to suffer from serious conflict of interest and procedural weaknesses that could compromise objective adjudication of even well-documented complaints. In our opinion the current system of self-regulation needs major modifications if it is to serve public health objectives, and more systematic evaluations of the complaint process are needed. © 2016 Society for the Study of Addiction.

Building an open-source robotic stereotaxic instrument.

PubMed

Coffey, Kevin R; Barker, David J; Ma, Sisi; West, Mark O

2013-10-29

This protocol includes the designs and software necessary to upgrade an existing stereotaxic instrument to a robotic (CNC) stereotaxic instrument for around $1,000 (excluding a drill), using industry standard stepper motors and CNC controlling software. Each axis has variable speed control and may be operated simultaneously or independently. The robot's flexibility and open coding system (g-code) make it capable of performing custom tasks that are not supported by commercial systems. Its applications include, but are not limited to, drilling holes, sharp edge craniotomies, skull thinning, and lowering electrodes or cannula. In order to expedite the writing of g-coding for simple surgeries, we have developed custom scripts that allow individuals to design a surgery with no knowledge of programming. However, for users to get the most out of the motorized stereotax, it would be beneficial to be knowledgeable in mathematical programming and G-Coding (simple programming for CNC machining). The recommended drill speed is greater than 40,000 rpm. The stepper motor resolution is 1.8°/Step, geared to 0.346°/Step. A standard stereotax has a resolution of 2.88 μm/step. The maximum recommended cutting speed is 500 μm/sec. The maximum recommended jogging speed is 3,500 μm/sec. The maximum recommended drill bit size is HP 2.

Code-division multiple-access protocol for active RFID systems

NASA Astrophysics Data System (ADS)

Mazurek, Gustaw; Szabatin, Jerzy

2008-01-01

Most of the Radio Frequency Identification (RFID) systems operating in HF and UHF bands employ narrowband modulations (FSK or ASK) with Manchester coding. However, these simple transmission schemes are vulnerable to narrowband interference (NBI) generated by other radio systems working in the same frequency band, and also suffer from collision problem and need special anti-collision procedures. This becomes especially important when operating in a noisy, crowded industrial environment. In this paper we show the performance of RFID system with DS-CDMA transmission in comparison to a standard system with FSK modulation defined in ISO 18000-7. Our simulation results show that without any bandwidth expansion the immunity against NBI can be improved by 8 dB and the system capacity can be 7 times higher when using DS-CDMA transmission instead of FSK modulation with Manchester coding.

Improving the coding and classification of ambulance data through the application of International Classification of Disease 10th revision.

PubMed

Cantwell, Kate; Morgans, Amee; Smith, Karen; Livingston, Michael; Dietze, Paul

2014-02-01

This paper aims to examine whether an adaptation of the International Classification of Disease (ICD) coding system can be applied retrospectively to final paramedic assessment data in an ambulance dataset with a view to developing more fine-grained, clinically relevant case definitions than are available through point-of-call data. Over 1.2 million case records were extracted from the Ambulance Victoria data warehouse. Data fields included dispatch code, cause (CN) and final primary assessment (FPA). Each FPA was converted to an ICD-10-AM code using word matching or best fit. ICD-10-AM codes were then converted into Major Diagnostic Categories (MDC). CN was aligned with the ICD-10-AM codes for external cause of morbidity and mortality. The most accurate results were obtained when ICD-10-AM codes were assigned using information from both FPA and CN. Comparison of cases coded as unconscious at point-of-call with the associated paramedic assessment highlighted the extra clinical detail obtained when paramedic assessment data are used. Ambulance paramedic assessment data can be aligned with ICD-10-AM and MDC with relative ease, allowing retrospective coding of large datasets. Coding of ambulance data using ICD-10-AM allows for comparison of not only ambulance service users but also with other population groups. WHAT IS KNOWN ABOUT THE TOPIC? There is no reliable and standard coding and categorising system for paramedic assessment data contained in ambulance service databases. WHAT DOES THIS PAPER ADD? This study demonstrates that ambulance paramedic assessment data can be aligned with ICD-10-AM and MDC with relative ease, allowing retrospective coding of large datasets. Representation of ambulance case types using ICD-10-AM-coded information obtained after paramedic assessment is more fine grained and clinically relevant than point-of-call data, which uses caller information before ambulance attendance. WHAT ARE THE IMPLICATIONS FOR PRACTITIONERS? This paper describes a model of coding using an internationally recognised standard coding and categorising system to support analysis of paramedic assessment. Ambulance data coded using ICD-10-AM allows for reliable reporting and comparison within the prehospital setting and across the healthcare industry.

Toward digital geologic map standards: a progress report

USGS Publications Warehouse

Ulrech, George E.; Reynolds, Mitchell W.; Taylor, Richard B.

1992-01-01

Establishing modern scientific and technical standards for geologic maps and their derivative map products is vital to both producers and users of such maps as we move into an age of digital cartography. Application of earth-science data in complex geographic information systems, acceleration of geologic map production, and reduction of population costs require that national standards be developed for digital geologic cartography and computer analysis. Since December 1988, under commission of the Chief Geologic of the U.S. Geological Survey and the mandate of the National Geologic Mapping Program (with added representation from the Association of American State Geologists), a committee has been designing a comprehensive set of scientific map standards. Three primary issues were: (1) selecting scientific symbology and its digital representation; (2) creating an appropriate digital coding system that characterizes geologic features with respect to their physical properties, stratigraphic and structural relations, spatial orientation, and interpreted mode of origin; and (3) developing mechanisms for reporting levels of certainty for descriptive as well as measured properties. Approximately 650 symbols for geoscience maps, including present usage of the U.S Geological Survey, state geological surveys, industry, and academia have been identified and tentatively adopted. A proposed coding system comprises four-character groupings of major and minor codes that can identify all attributes of a geologic feature. Such a coding system allows unique identification of as many as 105 geologic names and values on a given map. The new standard will track closely the latest developments of the Proposed Standard for Digital Cartographic Data soon to be submitted to the National Institute of Standards and Technology by the Federal Interagency Coordinating Committee on Digital Cartography. This standard will adhere generally to the accepted definitions and specifications for spatial data transfer. It will require separate specifications of digital cartographic quality relating to positional accuracy and ranges of measured and interpreted values such as geologic age and rock composition. Provisional digital geologic map standards will be published for trial implementation. After approximately two years, when comments on the proposed standards have been solicited and modifications made, formal adoption of the standards will be recommended. Widespread acceptance of the new standards will depend on their applicability to the broadest range of earth-science map products and their adaptability to changing cartographic technology.

Fast interrupt platform for extended DOS

NASA Technical Reports Server (NTRS)

Duryea, T. W.

1995-01-01

Extended DOS offers the unique combination of a simple operating system which allows direct access to the interrupt tables, 32 bit protected mode access to 4096 MByte address space, and the use of industry standard C compilers. The drawback is that fast interrupt handling requires both 32 bit and 16 bit versions of each real-time process interrupt handler to avoid mode switches on the interrupts. A set of tools has been developed which automates the process of transforming the output of a standard 32 bit C compiler to 16 bit interrupt code which directly handles the real mode interrupts. The entire process compiles one set of source code via a make file, which boosts productivity by making the management of the compile-link cycle very simple. The software components are in the form of classes written mostly in C. A foreground process written as a conventional application which can use the standard C libraries can communicate with the background real-time classes via a message passing mechanism. The platform thus enables the integration of high performance real-time processing into a conventional application framework.

Overview of the SAE G-11 RMSL (Reliability, Maintainability, Supportability, and Logistics) Division Activities and Technical Projects

NASA Technical Reports Server (NTRS)

Singhal, Surendra N.

2003-01-01

The SAE G-11 RMSL (Reliability, Maintainability, Supportability, and Logistics) Division activities include identification and fulfillment of joint industry, government, and academia needs for development and implementation of RMSL technologies. Four Projects in the Probabilistic Methods area and two in the area of RMSL have been identified. These are: (1) Evaluation of Probabilistic Technology - progress has been made toward the selection of probabilistic application cases. Future effort will focus on assessment of multiple probabilistic softwares in solving selected engineering problems using probabilistic methods. Relevance to Industry & Government - Case studies of typical problems encountering uncertainties, results of solutions to these problems run by different codes, and recommendations on which code is applicable for what problems; (2) Probabilistic Input Preparation - progress has been made in identifying problem cases such as those with no data, little data and sufficient data. Future effort will focus on developing guidelines for preparing input for probabilistic analysis, especially with no or little data. Relevance to Industry & Government - Too often, we get bogged down thinking we need a lot of data before we can quantify uncertainties. Not True. There are ways to do credible probabilistic analysis with little data; (3) Probabilistic Reliability - probabilistic reliability literature search has been completed along with what differentiates it from statistical reliability. Work on computation of reliability based on quantification of uncertainties in primitive variables is in progress. Relevance to Industry & Government - Correct reliability computations both at the component and system level are needed so one can design an item based on its expected usage and life span; (4) Real World Applications of Probabilistic Methods (PM) - A draft of volume 1 comprising aerospace applications has been released. Volume 2, a compilation of real world applications of probabilistic methods with essential information demonstrating application type and timehost savings by the use of probabilistic methods for generic applications is in progress. Relevance to Industry & Government - Too often, we say, 'The Proof is in the Pudding'. With help from many contributors, we hope to produce such a document. Problem is - not too many people are coming forward due to proprietary nature. So, we are asking to document only minimum information including problem description, what method used, did it result in any savings, and how much?; (5) Software Reliability - software reliability concept, program, implementation, guidelines, and standards are being documented. Relevance to Industry & Government - software reliability is a complex issue that must be understood & addressed in all facets of business in industry, government, and other institutions. We address issues, concepts, ways to implement solutions, and guidelines for maximizing software reliability; (6) Maintainability Standards - maintainability/serviceability industry standard/guidelines and industry best practices and methodologies used in performing maintainability/ serviceability tasks are being documented. Relevance to Industry & Government - Any industry or government process, project, and/or tool must be maintained and serviced to realize the life and performance it was designed for. We address issues and develop guidelines for optimum performance & life.

Comparative Study of Standards for Grid-Connected Wind Power Plant in China and the U.S.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Wenzhong; Tian, Tian; Muljadi, Eduard

2015-10-06

The rapid deployment of wind power has made grid integration and operational issues focal points in industry discussions and research. Compliance with grid connection standards for wind power plants (WPP) is crucial to ensuring the safe and stable operation of the electric power grid. The standards for grid-connected WPPs in China and the United States are compared in this paper to facilitate further improvements to the standards and enhance the development of wind power equipment. Detailed analyses in power quality, low-voltage ride-through capability, active power control, reactive power control, voltage control, and wind power forecasting are provided to enhance themore » understanding of grid codes in the two largest markets of wind power.« less

Design of the MUC-6 Evaluation

DTIC Science & Technology

1996-05-01

also a two- digit code for this product or service, based on the top-level classifica- tion of the Standard Industrial Classification. The TIE_UP...SENATOR FEDERICO ESTRADA VELEZ WAS KIDNAPPED ON 3 APRIL AT THE CORNER OF 60TH AND 48TH STREETS IN WESTERN MEDELLIN , ONLY 100 ME- TERS FROM A...OF INCIDENT COLOMBIA: MEDELLIN (CITY) 17. EFFECT ON PHYSICAL TARGET(S) * 18. EFFECT ON HUMAN TARGET(S) Figure 1: A sample message and associated

Development of MPEG standards for 3D and free viewpoint video

NASA Astrophysics Data System (ADS)

Smolic, Aljoscha; Kimata, Hideaki; Vetro, Anthony

2005-11-01

An overview of 3D and free viewpoint video is given in this paper with special focus on related standardization activities in MPEG. Free viewpoint video allows the user to freely navigate within real world visual scenes, as known from virtual worlds in computer graphics. Suitable 3D scene representation formats are classified and the processing chain is explained. Examples are shown for image-based and model-based free viewpoint video systems, highlighting standards conform realization using MPEG-4. Then the principles of 3D video are introduced providing the user with a 3D depth impression of the observed scene. Example systems are described again focusing on their realization based on MPEG-4. Finally multi-view video coding is described as a key component for 3D and free viewpoint video systems. MPEG is currently working on a new standard for multi-view video coding. The conclusion is that the necessary technology including standard media formats for 3D and free viewpoint is available or will be available in the near future, and that there is a clear demand from industry and user side for such applications. 3DTV at home and free viewpoint video on DVD will be available soon, and will create huge new markets.

Outdoor Lighting Ordinances

NASA Astrophysics Data System (ADS)

Davis, S.

2004-05-01

A principal means to prevent poor exterior lighting practices is a lighting control ordinance. It is an enforceable legal restriction on specific lighting practices that are deemed unacceptable by the government body having jurisdiction. Outdoor lighting codes have proven to be effective at reducing polluting and trespassing light. A well written exterior lighting code will permit all forms of necessary illumination at reasonable intensities, but will demand shielding and other measures to prevent trespass and light pollution. A good code will also apply to all forms of outdoor lighting, including streets, highways, and exterior signs, as well as the lighting on dwellings, commercial and industrial buildings and building sites. A good code can make exceptions for special uses, provided it complies with an effective standard. The IDA Model Lighting Ordinance is a response to these requests. It is intended as an aid to communities that are seeking to take control of their outdoor lighting, to "take back the night" that is being lost to careless and excessive use of night lighting.

Development of a CFD code for casting simulation

NASA Technical Reports Server (NTRS)

Murph, Jesse E.

1992-01-01

The task of developing a computational fluid dynamics (CFD) code to accurately model the mold filling phase of a casting operation was accomplished in a systematic manner. First the state-of-the-art was determined through a literature search, a code search, and participation with casting industry personnel involved in consortium startups. From this material and inputs from industry personnel, an evaluation of the currently available codes was made. It was determined that a few of the codes already contained sophisticated CFD algorithms and further validation of one of these codes could preclude the development of a new CFD code for this purpose. With industry concurrence, ProCAST was chosen for further evaluation. Two benchmark cases were used to evaluate the code's performance using a Silicon Graphics Personal Iris system. The results of these limited evaluations (because of machine and time constraints) are presented along with discussions of possible improvements and recommendations for further evaluation.

Nomenclature for congenital and paediatric cardiac disease: historical perspectives and The International Pediatric and Congenital Cardiac Code.

PubMed

Franklin, Rodney C G; Jacobs, Jeffrey Phillip; Krogmann, Otto N; Béland, Marie J; Aiello, Vera D; Colan, Steven D; Elliott, Martin J; William Gaynor, J; Kurosawa, Hiromi; Maruszewski, Bohdan; Stellin, Giovanni; Tchervenkov, Christo I; Walters Iii, Henry L; Weinberg, Paul; Anderson, Robert H

2008-12-01

Clinicians working in the field of congenital and paediatric cardiology have long felt the need for a common diagnostic and therapeutic nomenclature and coding system with which to classify patients of all ages with congenital and acquired cardiac disease. A cohesive and comprehensive system of nomenclature, suitable for setting a global standard for multicentric analysis of outcomes and stratification of risk, has only recently emerged, namely, The International Paediatric and Congenital Cardiac Code. This review, will give an historical perspective on the development of systems of nomenclature in general, and specifically with respect to the diagnosis and treatment of patients with paediatric and congenital cardiac disease. Finally, current and future efforts to merge such systems into the paperless environment of the electronic health or patient record on a global scale are briefly explored. On October 6, 2000, The International Nomenclature Committee for Pediatric and Congenital Heart Disease was established. In January, 2005, the International Nomenclature Committee was constituted in Canada as The International Society for Nomenclature of Paediatric and Congenital Heart Disease. This International Society now has three working groups. The Nomenclature Working Group developed The International Paediatric and Congenital Cardiac Code and will continue to maintain, expand, update, and preserve this International Code. It will also provide ready access to the International Code for the global paediatric and congenital cardiology and cardiac surgery communities, related disciplines, the healthcare industry, and governmental agencies, both electronically and in published form. The Definitions Working Group will write definitions for the terms in the International Paediatric and Congenital Cardiac Code, building on the previously published definitions from the Nomenclature Working Group. The Archiving Working Group, also known as The Congenital Heart Archiving Research Team, will link images and videos to the International Paediatric and Congenital Cardiac Code. The images and videos will be acquired from cardiac morphologic specimens and imaging modalities such as echocardiography, angiography, computerized axial tomography and magnetic resonance imaging, as well as intraoperative images and videos. Efforts are ongoing to expand the usage of The International Paediatric and Congenital Cardiac Code to other areas of global healthcare. Collaborative efforts are underway involving the leadership of The International Nomenclature Committee for Pediatric and Congenital Heart Disease and the representatives of the steering group responsible for the creation of the 11th revision of the International Classification of Diseases, administered by the World Health Organisation. Similar collaborative efforts are underway involving the leadership of The International Nomenclature Committee for Pediatric and Congenital Heart Disease and the International Health Terminology Standards Development Organisation, who are the owners of the Systematized Nomenclature of Medicine or "SNOMED". The International Paediatric and Congenital Cardiac Code was created by specialists in the field to name and classify paediatric and congenital cardiac disease and its treatment. It is a comprehensive code that can be freely downloaded from the internet (http://www.IPCCC.net) and is already in use worldwide, particularly for international comparisons of outcomes. The goal of this effort is to create strategies for stratification of risk and to improve healthcare for the individual patient. The collaboration with the World Heath Organization, the International Health Terminology Standards Development Organisation, and the healthcare industry, will lead to further enhancement of the International Code, and to its more universal use.

Ethical guidance in the era of managed care: an analysis of the American College of Healthcare Executives' Code of Ethics.

PubMed

Higgins, W

2000-01-01

Market competition and the rise of managed care are transforming the healthcare system from a physician-dominated cottage industry into a manager-dominated corporate enterprise. The managed care revolution is also undermining the safe-guards offered by medical ethics and raising serious public concerns. These trends highlight the growing importance of ethical standards for managers. The most comprehensive ethical guidance for health service managers is contained in the American College of Healthcare Executives' (ACHE) Code of Ethics. An analysis of the ACHE Code suggests that it does not adequately address several ethical concerns associated with managed care. The ACHE may wish to develop a supplemental statement regarding ethical issues in managed care. A supplemental statement that provides more specific guidance in the areas of financial incentives to reduce utilization, social mission, consumer/patient information, and the health service manager's responsibility to patients could be extremely valuable in today's complex and rapidly changing environment. More specific ethical guidelines would not ensure individual or organizational compliance. However, they would provide professional standards that could guide decision making and help managers evaluate performance in managed care settings.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mauro, R.; Leach, S.

This paper summarizes current and planned activities in the areas of hydrogen production and use, near-term venture opportunities, and codes and standards. The rationale for these efforts is to assess industry interest and engage in activities that move hydrogen technologies down the path to commercialization. Some of the work presented in this document is a condensed, preliminary version of reports being prepared under the DOE/NREL contract. In addition, the NHA work funded by Westinghouse Savannah River Corporation (WSRC) to explore the opportunities and industry interest in a Hydrogen Research Center is briefly described. Finally, the planned support of and industrymore » input to the Hydrogen Technical Advisory Panel (HTAP) on hydrogen demonstration projects is discussed.« less

Overview of RFID technology and its applications in the food industry.

PubMed

Kumar, P; Reinitz, H W; Simunovic, J; Sandeep, K P; Franzon, P D

2009-10-01

Radio frequency identification (RFID) is an alternative technology with a potential to replace traditional universal product code (UPC) barcodes. RFID enables identification of an object from a distance without requiring a line of sight. RFID tags can also incorporate additional data such as details of product and manufacturer and can transmit measured environmental factors such as temperature and relative humidity. This article presents key concepts and terminology related to RFID technology and its applications in the food industry. Components and working principles of an RFID system are described. Numerous applications of RFID technology in the food industry (supply chain management, temperature monitoring of foods, and ensuring food safety) are discussed. Challenges in implementation of RFID technology are also discussed in terms of read range, read accuracy, nonuniform standards, cost, recycling issues, privacy, and security concerns.

Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety

Science.gov Websites

Codes, Standards, and Safety to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Codes , Standards, and Safety on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Codes, Standards, and

75 FR 19944 - International Code Council: The Update Process for the International Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... for Residential Construction in High Wind Areas. ICC 700: National Green Building Standard. The... Codes and Standards that are comprehensive, coordinated, and necessary to regulate the built environment... International Codes and Standards consist of the following: ICC Codes International Building Code. International...

A Model of Lease versus Buy in Federal Government Construction Decisions.

DTIC Science & Technology

1985-09-01

services . Probably the most widely known restriction on spending in local government resulted from passage of California’s Proposition 13, approved by...Contract Cash Flow .... 71 8 C., Leasing is a standard methcd of acquiring needed assets and services in both the private and public sectors. This thesis...recent changes in the federal tax code, leasing prcwides a means by which private industry can sell tax credits. Trtis sale of tax credits has allowed

Generation of signature databases with fast codes

NASA Astrophysics Data System (ADS)

Bradford, Robert A.; Woodling, Arthur E.; Brazzell, James S.

1990-09-01

Using the FASTSIG signature code to generate optical signature databases for the Ground-based Surveillance and Traking System (GSTS) Program has improved the efficiency of the database generation process. The goal of the current GSTS database is to provide standardized, threat representative target signatures that can easily be used for acquisition and trk studies, discrimination algorithm development, and system simulations. Large databases, with as many as eight interpolalion parameters, are required to maintain the fidelity demands of discrimination and to generalize their application to other strateg systems. As the need increases for quick availability of long wave infrared (LWIR) target signatures for an evolving design4o-threat, FASTSIG has become a database generation alternative to using the industry standard OptiCal Signatures Code (OSC). FASTSIG, developed in 1985 to meet the unique strategic systems demands imposed by the discrimination function, has the significant advantage of being a faster running signature code than the OSC, typically requiring two percent of the cpu time. It uses analytical approximations to model axisymmetric targets, with the fidelity required for discrimination analysis. Access of the signature database is accomplished through use of the waveband integration and interpolation software, INTEG and SIGNAT. This paper gives details of this procedure as well as sample interpolated signatures and also covers sample verification by comparison to the OSC, in order to establish the fidelity of the FASTSIG generated database.

Comparison of Standards and Technical Requirements of Grid-Connected Wind Power Plants in China and the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, David Wenzhong; Muljadi, Eduard; Tian, Tian

The rapid deployment of wind power has made grid integration and operational issues focal points in industry discussions and research. Compliance with grid connection standards for wind power plants (WPPs) is crucial to ensuring the reliable and stable operation of the electric power grid. This report compares the standards for grid-connected WPPs in China to those in the United States to facilitate further improvements in wind power standards and enhance the development of wind power equipment. Detailed analyses of power quality, low-voltage ride-through capability, active power control, reactive power control, voltage control, and wind power forecasting are provided to enhancemore » the understanding of grid codes in the two largest markets of wind power. This study compares WPP interconnection standards and technical requirements in China to those in the United States.« less

Eighteen years of recommendations to prevent industrial chemical incidents: results and lessons learned of the US Chemical Safety Board.

PubMed

Tinney, V A; Anenberg, S C; Kaszniak, M; Robinson, B

2016-10-01

The US Chemical Safety Board (CSB), a federal agency that investigates significant chemical incidents and hazards, is interested in determining the impact of the recommendations resulting from its investigations, and how to better more effective recommendations to prevent chemical incidents. This is a descriptive study of the US Chemical Safety Board's safety recommendations. The CSB coded and analysed its safety recommendations according to potential impact on reducing incidents, implementation status, purpose and recipient type. As of March 31, 2015, the CSB has issued 733 recommendations, 75% (548) of which are closed and 25% (185) of which remain open. For recommendations categorised as having high, medium, and low impact, 38% (78), 76% (160), and 78% (245) were implemented, respectively. CSB recommendations have led to important and lasting safety changes through regulations, industry guidance and voluntary consensus standards, and individual companies; however, coding recommendations by potential impact do not fully capture the influence of CSB recommendations. While this methodology serves as a preliminary way to determine the effect of recommendations, further data are needed to determine the extent to which these safety changes have reduced the frequency or severity of industrial accidents. Copyright © 2016 The Royal Society for Public Health. All rights reserved.

Occupational health services in South Carolina manufacturing plants: results of a survey.

PubMed Central

Chovil, A C; Alexander, G R; Gibson, J J; Altekruse, J M

1983-01-01

A mailed survey of occupational health and safety practices in industrial manufacturing plants with more than 50 employees was carried out in South Carolina, with a response rate of 60 percent. The responding plants represented 73 percent of the total workforce in the industries. Data were analyzed in relation to the types of industry as delineated by the Standard Industrial Code. Eighty-three percent of the responding plants (a percentage that represented more than 92 percent of the total workforce in the industries) had some arrangements for the medical or nursing care of employees. For the study, occupational health services were defined at three levels: basic (mandatory), secondary (beneficial to management), and tertiary (health promotion-preventive medicine). The basic services provided by most of the industries surveyed appeared to be adequate. Secondary services were well developed except in the apparel and lumber industries. Tertiary services, in terms of five selected preventive programs, were moderately developed only in the paper, petroleum, and chemical industries. Only alcohol abuse control programs were commonly offered in the other types of industry. The size of the workforce in a plant partly dictated the level of occupational health services it offered but did not always account for all inter-industry variation. PMID:6419275

Occupational health services in South Carolina manufacturing plants: results of a survey.

PubMed

Chovil, A C; Alexander, G R; Gibson, J J; Altekruse, J M

1983-01-01

A mailed survey of occupational health and safety practices in industrial manufacturing plants with more than 50 employees was carried out in South Carolina, with a response rate of 60 percent. The responding plants represented 73 percent of the total workforce in the industries. Data were analyzed in relation to the types of industry as delineated by the Standard Industrial Code. Eighty-three percent of the responding plants (a percentage that represented more than 92 percent of the total workforce in the industries) had some arrangements for the medical or nursing care of employees. For the study, occupational health services were defined at three levels: basic (mandatory), secondary (beneficial to management), and tertiary (health promotion-preventive medicine). The basic services provided by most of the industries surveyed appeared to be adequate. Secondary services were well developed except in the apparel and lumber industries. Tertiary services, in terms of five selected preventive programs, were moderately developed only in the paper, petroleum, and chemical industries. Only alcohol abuse control programs were commonly offered in the other types of industry. The size of the workforce in a plant partly dictated the level of occupational health services it offered but did not always account for all inter-industry variation.

Safety Criticality Standards Using the French CRISTAL Code Package: Application to the AREVA NP UO{sub 2} Fuel Fabrication Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doucet, M.; Durant Terrasson, L.; Mouton, J.

2006-07-01

Criticality safety evaluations implement requirements to proof of sufficient sub critical margins outside of the reactor environment for example in fuel fabrication plants. Basic criticality data (i.e., criticality standards) are used in the determination of sub critical margins for all processes involving plutonium or enriched uranium. There are several criticality international standards, e.g., ARH-600, which is one the US nuclear industry relies on. The French Nuclear Safety Authority (DGSNR and its advising body IRSN) has requested AREVA NP to review the criticality standards used for the evaluation of its Low Enriched Uranium fuel fabrication plants with CRISTAL V0, the recentlymore » updated French criticality evaluation package. Criticality safety is a concern for every phase of the fabrication process including UF{sub 6} cylinder storage, UF{sub 6}-UO{sub 2} conversion, powder storage, pelletizing, rod loading, assembly fabrication, and assembly transportation. Until 2003, the accepted criticality standards were based on the French CEA work performed in the late seventies with the APOLLO1 cell/assembly computer code. APOLLO1 is a spectral code, used for evaluating the basic characteristics of fuel assemblies for reactor physics applications, which has been enhanced to perform criticality safety calculations. Throughout the years, CRISTAL, starting with APOLLO1 and MORET 3 (a 3D Monte Carlo code), has been improved to account for the growth of its qualification database and for increasing user requirements. Today, CRISTAL V0 is an up-to-date computational tool incorporating a modern basic microscopic cross section set based on JEF2.2 and the comprehensive APOLLO2 and MORET 4 codes. APOLLO2 is well suited for criticality standards calculations as it includes a sophisticated self shielding approach, a P{sub ij} flux determination, and a 1D transport (S{sub n}) process. CRISTAL V0 is the result of more than five years of development work focusing on theoretical approaches and the implementation of user-friendly graphical interfaces. Due to its comprehensive physical simulation and thanks to its broad qualification database with more than a thousand benchmark/calculation comparisons, CRISTAL V0 provides outstanding and reliable accuracy for criticality evaluations for configurations covering the entire fuel cycle (i.e. from enrichment, pellet/assembly fabrication, transportation, to fuel reprocessing). After a brief description of the calculation scheme and the physics algorithms used in this code package, results for the various fissile media encountered in a UO{sub 2} fuel fabrication plant will be detailed and discussed. (authors)« less

American College of Occupational and Environmental Medicine (ACOEM): a professional association in service to industry.

PubMed

LaDou, Joseph; Teitelbaum, Daniel T; Egilman, David S; Frank, Arthur L; Kramer, Sharon N; Huff, James

2007-01-01

The American College of Occupational and Environmental Medicine (ACOEM) is a professional association that represents the interests of its company-employed physician members. Fifty years ago the ACOEM began to assert itself in the legislative arena as an advocate of limited regulation and enforcement of occupational health and safety standards and laws, and environmental protection. Today the ACOEM provides a legitimizing professional association for company doctors, and continues to provide a vehicle to advance the agendas of their corporate sponsors. Company doctors in ACOEM recently blocked attempts to have the organization take a stand on global warming. Company doctors employed by the petrochemical industry even blocked the ACOEM from taking a position on particulate air pollution. Industry money and influence pervade every aspect of occupational and environmental medicine. The controlling influence of industry over the ACOEM physicians should cease. The conflict of interests inherent in the practice of occupational and environmental medicine is not resolved by the ineffectual efforts of the ACOEM to establish a pretentious code of conduct. The conflicted interests within the ACOEM have become too deeply embedded to be resolved by merely a self-governing code of conduct. The specialty practice of occupational and environmental medicine has the opportunity and obligation to join the public health movement. If it does, the ACOEM will have no further purpose as it exists, and specialists in occupational and environmental medicine will meet with and be represented by public health associations. This paper chronicles the history of occupational medicine and industry physicians as influenced and even controlled by corporate leaders.

The role of open-source software in innovation and standardization in radiology.

PubMed

Erickson, Bradley J; Langer, Steve; Nagy, Paul

2005-11-01

The use of open-source software (OSS), in which developers release the source code to applications they have developed, is popular in the software industry. This is done to allow others to modify and improve software (which may or may not be shared back to the community) and to allow others to learn from the software. Radiology was an early participant in this model, supporting OSS that implemented the ACR-National Electrical Manufacturers Association (now Digital Imaging and Communications in Medicine) standard for medical image communications. In radiology and in other fields, OSS has promoted innovation and the adoption of standards. Popular OSS is of high quality because access to source code allows many people to identify and resolve errors. Open-source software is analogous to the peer-review scientific process: one must be able to see and reproduce results to understand and promote what is shared. The authors emphasize that support for OSS need not threaten vendors; most vendors embrace and benefit from standards. Open-source development does not replace vendors but more clearly defines their roles, typically focusing on areas in which proprietary differentiators benefit customers and on professional services such as implementation planning and service. Continued support for OSS is essential for the success of our field.

PRA and Risk Informed Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernsen, Sidney A.; Simonen, Fredric A.; Balkey, Kenneth R.

2006-01-01

The Boiler and Pressure Vessel Code (BPVC) of the American Society of Mechanical Engineers (ASME) has introduced a risk based approach into Section XI that covers Rules for Inservice Inspection of Nuclear Power Plant Components. The risk based approach requires application of the probabilistic risk assessments (PRA). Because no industry consensus standard existed for PRAs, ASME has developed a standard to evaluate the quality level of an available PRA needed to support a given risk based application. The paper describes the PRA standard, Section XI application of PRAs, and plans for broader applications of PRAs to other ASME nuclear codesmore » and standards. The paper addresses several specific topics of interest to Section XI. Important consideration are special methods (surrogate components) used to overcome the lack of PRA treatments of passive components in PRAs. The approach allows calculations of conditional core damage probabilities both for component failures that cause initiating events and failures in standby systems that decrease the availability of these systems. The paper relates the explicit risk based methods of the new Section XI code cases to the implicit consideration of risk used in the development of Section XI. Other topics include the needed interactions of ISI engineers, plant operating staff, PRA specialists, and members of expert panels that review the risk based programs.« less

Residual activity evaluation: a benchmark between ANITA, FISPACT, FLUKA and PHITS codes

NASA Astrophysics Data System (ADS)

Firpo, Gabriele; Viberti, Carlo Maria; Ferrari, Anna; Frisoni, Manuela

2017-09-01

The activity of residual nuclides dictates the radiation fields in periodic inspections/repairs (maintenance periods) and dismantling operations (decommissioning phase) of accelerator facilities (i.e., medical, industrial, research) and nuclear reactors. Therefore, the correct prediction of the material activation allows for a more accurate planning of the activities, in line with the ALARA (As Low As Reasonably Achievable) principles. The scope of the present work is to show the results of a comparison between residual total specific activity versus a set of cooling time instants (from zero up to 10 years after irradiation) as obtained by two analytical (FISPACT and ANITA) and two Monte Carlo (FLUKA and PHITS) codes, making use of their default nuclear data libraries. A set of 40 irradiating scenarios is considered, i.e. neutron and proton particles of different energies, ranging from zero to many hundreds MeV, impinging on pure elements or materials of standard composition typically used in industrial applications (namely, AISI SS316 and Portland concrete). In some cases, experimental results were also available for a more thorough benchmark.

Identifying high-risk small business industries for occupational safety and health interventions.

PubMed

Okun, A; Lentz, T J; Schulte, P; Stayner, L

2001-03-01

Approximately one-third (32%) of U.S. workers are employed in small business industries (those with 80% of workers in establishments with fewer than 100 employees), and approximately 53 million persons in private industry work in small business establishments. This study was performed to identify small business industries at high risk for occupational injuries, illnesses, and fatalities. Small business industries were identified from among all three- and four-digit Standard Industrial Classification (SIC) codes and ranked using Bureau of Labor Statistics (BLS) data by rates and numbers of occupational injuries, illnesses, and fatalities. Both incidence rates and number of injury, illness, and fatality cases were evaluated. The 253 small business industries identified accounted for 1,568 work-related fatalities (34% of all private industry). Transportation incidents and violent acts were the leading causes of these fatalities. Detailed injury and illness data were available for 105 small business industries, that accounted for 1,476,400 work-related injuries, and 55,850 occupational illnesses. Many of the small business industries had morbidity and mortality rates exceeding the average rates for all private industry. The highest risk small business industries, based on a combined morbidity and mortality index, included logging, cut stone and stone products, truck terminals, and roofing, siding, and sheet metal work. Identification of high-risk small business industries indicates priorities for those interested in developing targeted prevention programs.

Energy conservation in two wheeler head tube welding fixture by modeling

NASA Astrophysics Data System (ADS)

Kamalanathan, S.; Guruprasad, B.; Elango, A.

2018-05-01

Energy conservation in automotive industry plays a significant role to increase the productivity which reduces the Men, Material, and Machinery. The Automotive industry sector is one of the major sector which works in two or more times of loading of work pieces in welding fixture. It consumes more energy. This project focuses on reduce the energy consumption by applying single time loading of work pieces with minimum number of labours, machine and reduces scrap. Welding fixtures are designed for the components which are difficult to weld in normal way or without any holding unit. The fixture is to be designed for the two wheeler head tube assembly which is to be welded with its companion for its application. It is demonstrated by modelling in Uni-graphics Software and FEA analysis will be done by ANSYS and experimentally products are tested and execute in industry. A code of practice suggested establishing acceptable standard for energy used in Automotive industry.

Lead exposure in US worksites: A literature review and development of an occupational lead exposure database from the published literature

PubMed Central

Koh, Dong-Hee; Locke, Sarah J.; Chen, Yu-Cheng; Purdue, Mark P.; Friesen, Melissa C.

2016-01-01

Background Retrospective exposure assessment of occupational lead exposure in population-based studies requires historical exposure information from many occupations and industries. Methods We reviewed published US exposure monitoring studies to identify lead exposure measurement data. We developed an occupational lead exposure database from the 175 identified papers containing 1,111 sets of lead concentration summary statistics (21% area air, 47% personal air, 32% blood). We also extracted ancillary exposure-related information, including job, industry, task/location, year collected, sampling strategy, control measures in place, and sampling and analytical methods. Results Measurements were published between 1940 and 2010 and represented 27 2-digit standardized industry classification codes. The majority of the measurements were related to lead-based paint work, joining or cutting metal using heat, primary and secondary metal manufacturing, and lead acid battery manufacturing. Conclusions This database can be used in future statistical analyses to characterize differences in lead exposure across time, jobs, and industries. PMID:25968240

Coop Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivera, Zaylis Zayas; Bond, Essex

2013-11-22

My Coop at LLNL has been my first professional experience as an Electrical Engineer. I was tasked to carry out signal processing to analyze data and code in the IDL following standard software development principles. The Coop has met all of my needs to continue my professional career, and I feel more confident as I continue working as a student and professional. It is now a big open question for me as whether to pursue graduate research or industry after I graduate with my B.S. in Electrical Engineering.

SAMIS- STANDARD ASSEMBLY-LINE MANUFACTURING INDUSTRY SIMULATION

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.

1994-01-01

The Standard Assembly-Line Manufacturing Industry Simulation (SAMIS) program was originally developed to model a hypothetical U. S. industry which manufactures silicon solar modules for use in electricity generation. The SAMIS program has now been generalized to the extent that it should be useful for simulating many different production-line manufacturing industries and companies. The most important capability of SAMIS is its ability to "simulate" an industry based on a model developed by the user with the aid of the SAMIS program. The results of the simulation are a set of financial reports which detail the requirements, including quantities and cost, of the companies and processes which comprise the industry. SAMIS provides a fair, consistent, and reliable means of comparing manufacturing processes being developed by numerous independent efforts. It can also be used to assess the industry-wide impact of changes in financial parameters, such as cost of resources and services, inflation rates, interest rates, tax policies, and required return on equity. Because of the large amount of data needed to describe an industry, a major portion of SAMIS is dedicated to data entry and maintenance. This activity in SAMIS is referred to as model management. Model management requires a significant amount of interaction through a system of "prompts" which make it possible for persons not familiar with computers, or the SAMIS program, to provide all of the data necessary to perform a simulation. SAMIS is written in TURBO PASCAL (version 2.0 required for compilation) and requires 10 meg of hard disk space, an 8087 coprocessor, and an IBM color graphics monitor. Executables and source code are provided. SAMIS was originally developed in 1978; the IBM PC version was developed in 1985. Release 6.1 was made available in 1986, and includes the PC-IPEG program.

Alternative Fuels Data Center: Codes and Standards Basics

Science.gov Websites

, the American National Standards Institute regulates how organizations publish codes and standards standards. Legal Enforcement Codes and standards are legally enforceable when jurisdictions adopt them by reference or direct incorporation into their regulations. When jurisdictions adopt codes, they also adopt

Technical Support Document for Version 3.4.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2007-09-14

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Malley, Kathleen; Lopez, Hugo; Cairns, Julie

An overview of the main North American codes and standards associated with hydrogen safety sensors is provided. The distinction between a code and a standard is defined, and the relationship between standards and codes is clarified, especially for those circumstances where a standard or a certification requirement is explicitly referenced within a code. The report identifies three main types of standards commonly applied to hydrogen sensors (interface and controls standards, shock and hazard standards, and performance-based standards). The certification process and a list and description of the main standards and model codes associated with the use of hydrogen safety sensorsmore » in hydrogen infrastructure are presented.« less

Cryogenic Information Center

NASA Technical Reports Server (NTRS)

Mohling, Robert A.; Marquardt, Eric D.; Fusilier, Fred C.; Fesmire, James E.

2003-01-01

The Cryogenic Information Center (CIC) is a not-for-profit corporation dedicated to preserving and distributing cryogenic information to government, industry, and academia. The heart of the CIC is a uniform source of cryogenic data including analyses, design, materials and processes, and test information traceable back to the Cryogenic Data Center of the former National Bureau of Standards. The electronic database is a national treasure containing over 146,000 specific bibliographic citations of cryogenic literature and thermophysical property data dating back to 1829. A new technical/bibliographic inquiry service can perform searches and technical analyses. The Cryogenic Material Properties (CMP) Program consists of computer codes using empirical equations to determine thermophysical material properties with emphasis on the 4-300K range. CMP's objective is to develop a user-friendly standard material property database using the best available data so government and industry can conduct more accurate analyses. The CIC serves to benefit researchers, engineers, and technologists in cryogenics and cryogenic engineering, whether they are new or experienced in the field.

75 FR 54347 - Draft Guidance for Industry: Bar Code Label Requirements-Questions and Answers (Question 12...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-07

...] Draft Guidance for Industry: Bar Code Label Requirements-- Questions and Answers (Question 12 Update... Administration (FDA) is announcing the availability of a draft document entitled ``Guidance for Industry: Bar... guidance provides you, manufacturers of a licensed vaccine, with advice concerning compliance with the bar...

Industrial Computer Codes

NASA Technical Reports Server (NTRS)

Shapiro, Wilbur

1996-01-01

This is an overview of new and updated industrial codes for seal design and testing. GCYLT (gas cylindrical seals -- turbulent), SPIRALI (spiral-groove seals -- incompressible), KTK (knife to knife) Labyrinth Seal Code, and DYSEAL (dynamic seal analysis) are covered. CGYLT uses G-factors for Poiseuille and Couette turbulence coefficients. SPIRALI is updated to include turbulence and inertia, but maintains the narrow groove theory. KTK labyrinth seal code handles straight or stepped seals. And DYSEAL provides dynamics for the seal geometry.

Towards Industrial Application of Damage Models for Sheet Metal Forming

NASA Astrophysics Data System (ADS)

Doig, M.; Roll, K.

2011-05-01

Due to global warming and financial situation the demand to reduce the CO2-emission and the production costs leads to the permanent development of new materials. In the automotive industry the occupant safety is an additional condition. Bringing these arguments together the preferable approach for lightweight design of car components, especially for body-in-white, is the use of modern steels. Such steel grades, also called advanced high strength steels (AHSS), exhibit a high strength as well as a high formability. Not only their material behavior but also the damage behavior of AHSS is different compared to the performances of standard steels. Conventional methods for the damage prediction in the industry like the forming limit curve (FLC) are not reliable for AHSS. Physically based damage models are often used in crash and bulk forming simulations. The still open question is the industrial application of these models for sheet metal forming. This paper evaluates the Gurson-Tvergaard-Needleman (GTN) model and the model of Lemaitre within commercial codes with a goal of industrial application.

An Open Source Rapid Computer Aided Control System Design Toolchain Using Scilab, Scicos and RTAI Linux

NASA Astrophysics Data System (ADS)

Bouchpan-Lerust-Juéry, L.

2007-08-01

Current and next generation on-board computer systems tend to implement real-time embedded control applications (e.g. Attitude and Orbit Control Subsystem (AOCS), Packet Utililization Standard (PUS), spacecraft autonomy . . . ) which must meet high standards of Reliability and Predictability as well as Safety. All these requirements require a considerable amount of effort and cost for Space Sofware Industry. This paper, in a first part, presents a free Open Source integrated solution to develop RTAI applications from analysis, design, simulation and direct implementation using code generation based on Open Source and in its second part summarises this suggested approach, its results and the conclusion for further work.

Side scanner for supermarkets: a new scanner design standard

NASA Astrophysics Data System (ADS)

Cheng, Charles K.; Cheng, J. K.

1996-09-01

High speed UPC bar code has become a standard mode of data capture for supermarkets in the US, Europe, and Japan. The influence of the ergonomics community on the design of the scanner is evident. During the past decade the ergonomic issues of cashier in check-outs has led to occupational hand-wrist cumulative trauma disorders, in most cases causing carpal tunnel syndrome, a permanent hand injury. In this paper, the design of a side scanner to resolve the issues is discussed. The complex optical module and the sensor for aforesaid side scanner is described. The ergonomic advantages offer the old counter mounted vertical scanner has been experimentally proved by the industrial funded study at an independent university.

78 FR 18321 - International Code Council: The Update Process for the International Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... for Residential Construction in High Wind Regions. ICC 700: National Green Building Standard The..., coordinated, and necessary to regulate the built environment. Federal agencies frequently use these codes and... International Codes and Standards consist of the following: ICC Codes International Building Code. International...

Technical Support Document for Version 3.9.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2011-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.« less

Technical Support Document for Version 3.9.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2012-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.« less

Benefits and risks of adopting the global code of practice for recreational fisheries

USGS Publications Warehouse

Arlinghaus, Robert; Beard, T. Douglas; Cooke, Steven J.; Cowx, Ian G.

2012-01-01

Recreational fishing constitutes the dominant or sole use of many fish stocks, particularly in freshwater ecosystems in Western industrialized countries. However, despite their social and economic importance, recreational fisheries are generally guided by local or regional norms and standards, with few comprehensive policy and development frameworks existing across jurisdictions. We argue that adoption of a recently developed Global Code of Practice (CoP) for Recreational Fisheries can provide benefits for moving recreational fisheries toward sustainability on a global scale. The CoP is a voluntary document, specifically framed toward recreational fisheries practices and issues, thereby complementing and extending the United Nation's Code of Conduct for Responsible Fisheries by the Food and Agricultural Organization. The CoP for Recreational Fisheries describes the minimum standards of environmentally friendly, ethically appropriate, and—depending on local situations—socially acceptable recreational fishing and its management. Although many, if not all, of the provisions presented in the CoP are already addressed through national fisheries legislation and state-based fisheries management regulations in North America, adopting a common framework for best practices in recreational fisheries across multiple jurisdictions would further promote their long-term viability in the face of interjurisdictional angler movements and some expanding threats to the activity related to shifting sociopolitical norms.

A David and Goliath story: tobacco advertising and self-regulation in Australia.

PubMed

Chapman, S

1980-11-01

A small group of health workers succeeded in getting the largest tobacco advertising campaign in Australia banned by testing a clause in the advertising industry's voluntary code of self-regulation. The group complained about a series of cigarette advertisements that featured an Australian entertainer who was popular with the young. Though the tobacco company denied the entertainer's major appeal to the young, the chairman of the Advertising Standards Council ruled that the campaign did breach the code. The delay before the complaint was adjudicated--18 months--contrasted with the speed with which a series of antismoking advertisements had been withdrawn after complaints by a tobacco company's advertisers. MOP UP's victory in this case contains several lessons for people interested in restricting the promotional activities of multinational tobacco companies.

Study on Full Supply Chain Quality and Safetytraceability Systems For Cereal And Oilproducts

NASA Astrophysics Data System (ADS)

Liu, Shihong; Zheng, Huoguo; Meng, Hong; Hu, Haiyan; Wu, Jiangshou; Li, Chunhua

Global food industry and Governments in many countries are putting increasing emphasis on establishment of food traceability systems. Food traceability has become an effective way in food safety management. Aimed at the major quality problems of cereal and oil products existing in the production, processing, warehousing, distribution and other links in the supply chain, this paper firstly proposes a new traceability framework combines the information flow with critical control points and quality indicators. Then it introduces traceability database design and data access mode to realize the framework. In practice, Code design for tracing goods is a challenge thing, so this paper put forward a code system based on UCC/EAN-128 standard.Middleware and Electronic terminal design are also briefly introduced to accomplish traceability system for cereal and oil products.

Standard interface files and procedures for reactor physics codes, version III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carmichael, B.M.

Standards and procedures for promoting the exchange of reactor physics codes are updated to Version-III status. Standards covering program structure, interface files, file handling subroutines, and card input format are included. The implementation status of the standards in codes and the extension of the standards to new code areas are summarized. (15 references) (auth)

Radiation from advanced solid rocket motor plumes

NASA Technical Reports Server (NTRS)

Farmer, Richard C.; Smith, Sheldon D.; Myruski, Brian L.

1994-01-01

The overall objective of this study was to develop an understanding of solid rocket motor (SRM) plumes in sufficient detail to accurately explain the majority of plume radiation test data. Improved flowfield and radiation analysis codes were developed to accurately and efficiently account for all the factors which effect radiation heating from rocket plumes. These codes were verified by comparing predicted plume behavior with measured NASA/MSFC ASRM test data. Upon conducting a thorough review of the current state-of-the-art of SRM plume flowfield and radiation prediction methodology and the pertinent data base, the following analyses were developed for future design use. The NOZZRAD code was developed for preliminary base heating design and Al2O3 particle optical property data evaluation using a generalized two-flux solution to the radiative transfer equation. The IDARAD code was developed for rapid evaluation of plume radiation effects using the spherical harmonics method of differential approximation to the radiative transfer equation. The FDNS CFD code with fully coupled Euler-Lagrange particle tracking was validated by comparison to predictions made with the industry standard RAMP code for SRM nozzle flowfield analysis. The FDNS code provides the ability to analyze not only rocket nozzle flow, but also axisymmetric and three-dimensional plume flowfields with state-of-the-art CFD methodology. Procedures for conducting meaningful thermo-vision camera studies were developed.

The NASA Spacecraft Transponding Modem

NASA Technical Reports Server (NTRS)

Berner, Jeff B.; Kayalar, Selahattin; Perret, Jonathan D.

2000-01-01

A new deep space transponder is being developed by the Jet Propulsion Laboratory for NASA. The Spacecraft Transponding Modem (STM) implements the standard transponder functions and the channel service functions that have previously resided in spacecraft Command/Data Subsystems. The STM uses custom ASICs, MMICs, and MCMs to reduce the active device parts count to 70, mass to I kg, and volume to 524 cc. The first STMs will be flown on missions launching in the 2003 time frame. The STM tracks an X-band uplink signal and provides both X-band and Ka-band downlinks, either coherent or non-coherent with the uplink. A NASA standard Command Detector Unit is integrated into the STM, along with a codeblock processor and a hardware command decoder. The decoded command codeblocks are output to the spacecraft command/data subsystem. Virtual Channel 0 (VC-0) (hardware) commands are processed and output as critical controller (CRC) commands. Downlink telemetry is received from the spacecraft data subsystem as telemetry frames. The STM provides the following downlink coding options: the standard CCSDS (7-1/2) convolutional coding, ReedSolomon coding with interleave depths one and five, (15-1/6) convolutional coding, and Turbo coding with rates 1/3 and 1/6. The downlink symbol rates can be linearly ramped to match the G/T curve of the receiving station, providing up to a 1 dB increase in data return. Data rates range from 5 bits per second (bps) to 24 Mbps, with three modulation modes provided: modulated subcarrier (3 different frequencies provided), biphase-L modulated direct on carrier, and Offset QPSK. Also, the capability to generate one of four non-harmonically related telemetry beacon tones is provided, to allow for a simple spacecraft status monitoring scheme for cruise phases of missions. Three ranging modes are provided: standard turn around ranging, regenerative pseudo-noise (PN) ranging, and Differential One-way Ranging (DOR) tones. The regenerative ranging provides the capability of increasing the ground received ranging SNR by up to 30 dB. Two different avionics interfaces to the command/data subsystem's data bus are provided: a MIL STD 1553B bus or an industry standard PCI interface. Digital interfaces provide the capability to control antenna selection (e.g., switching between high gain and low gain antennas) and antenna pointing (for future steered Ka-band antennas).

Occupation and multiple myeloma: an occupation and industry analysis.

PubMed

Gold, Laura S; Milliken, Kevin; Stewart, Patricia; Purdue, Mark; Severson, Richard; Seixas, Noah; Blair, Aaron; Davis, Scott; Hartge, Patricia; De Roos, Anneclaire J

2010-08-01

Multiple myeloma (MM) is an incurable plasma cell malignancy with a poorly understood etiology. The purpose of our research was to examine the relationships between lifetime occupations and MM in a relatively large case-control study. MM cases (n = 180) were identified through cancer registries in the Seattle-Puget Sound area and Detroit. Population-based controls (n = 481) were identified using random digit dialing and Medicare and Medicaid Services files. In-person interviews were conducted to ascertain occupational histories. Standard occupational classification (SOC) and standard industrial classification (SIC) codes were assigned to each job held by each participant. Unconditional logistic regression was used to generate odds ratios (ORs) and 95% confidence intervals (CIs) for associations between MM and having ever worked in each occupation/industry and according to duration of employment in an occupation/industry. The risk of MM was associated with several manufacturing occupations and industries, including machine operators and tenders, not elsewhere classified (SOC 76) (OR = 1.8, CI = 1.0-3.3); textile, apparel, and furnishing machine operators and tenders (SOC 765) (OR = 6.0, CI = 1.7-21); and machinery manufacturing, except electrical (SIC 35) (OR = 3.3, CI = 1.7-6.7). Several service occupations and industries, such as food and beverage preparation (SOC 521) (OR = 2.0, CI = 1.1-3.8), were also associated with MM. One occupation that has been associated with MM in several previous studies, painters, paperhangers, and plasterers (SOC 644) was associated with a non-significantly elevated risk (OR = 3.6, CI = 0.7-19). We found associations between the risk of MM and employment in several manufacturing and service-related occupations and industries. Copyright 2010 Wiley-Liss, Inc.

Occupation and multiple myeloma: an occupation and industry analysis

PubMed Central

Gold, Laura S; Milliken, Kevin; Stewart, Patricia; Purdue, Mark; Severson, Richard; Seixas, Noah; Blair, Aaron; Davis, Scott; Hartge, Patricia; De Roos, Anneclaire J

2011-01-01

Background Multiple myeloma (MM) is an incurable plasma cell malignancy with a poorly understood etiology. The purpose of our research was to examine relationships between lifetime occupations and MM in a relatively large case-control study. Methods MM cases (n=180) were identified through cancer registries in the Seattle-Puget Sound area and Detroit. Population-based controls (n=481) were identified using random digit dialing and Medicare and Medicaid Services files. In-person interviews were conducted to ascertain occupational histories. Standard occupational classification (SOC) and standard industrial classification (SIC) codes were assigned to each job held by each participant. Unconditional logistic regression was used to generate odds ratios (ORs) and 95% confidence intervals (CIs) for associations between MM and having ever worked in each occupation/industry and according to duration of employment in an occupation/industry. Results The risk of MM was associated with several manufacturing occupations and industries, including machine operators and tenders, not elsewhere classified (SOC 76) (OR=1.8, CI=1.0–3.3); textile, apparel, and furnishing machine operators and tenders (SOC 765) (OR=6.0, CI=1.7–21); and machinery manufacturing, except electrical (SIC 35) (OR=3.3, CI=1.7–6.7). Several service occupations and industries, such as food and beverage preparation (SOC 521) (OR=2.0, CI=1.1–3.8), were also associated with MM. One occupation that has been associated with MM in several previous studies, painters, paperhangers, and plasterers (SOC 644), was associated with a non–significantly elevated risk (OR=3.6, CI=0.7–19). Conclusions We found associations between the risk of MM and employment in several manufacturing and service-related occupations and industries. PMID:20623662

A Software Development Platform for Wearable Medical Applications.

PubMed

Zhang, Ruikai; Lin, Wei

2015-10-01

Wearable medical devices have become a leading trend in healthcare industry. Microcontrollers are computers on a chip with sufficient processing power and preferred embedded computing units in those devices. We have developed a software platform specifically for the design of the wearable medical applications with a small code footprint on the microcontrollers. It is supported by the open source real time operating system FreeRTOS and supplemented with a set of standard APIs for the architectural specific hardware interfaces on the microcontrollers for data acquisition and wireless communication. We modified the tick counter routine in FreeRTOS to include a real time soft clock. When combined with the multitasking features in the FreeRTOS, the platform offers the quick development of wearable applications and easy porting of the application code to different microprocessors. Test results have demonstrated that the application software developed using this platform are highly efficient in CPU usage while maintaining a small code foot print to accommodate the limited memory space in microcontrollers.

Continuous Codes and Standards Improvement (CCSI)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivkin, Carl H; Burgess, Robert M; Buttner, William J

2015-10-21

As of 2014, the majority of the codes and standards required to initially deploy hydrogen technologies infrastructure in the United States have been promulgated. These codes and standards will be field tested through their application to actual hydrogen technologies projects. Continuous codes and standards improvement (CCSI) is a process of identifying code issues that arise during project deployment and then developing codes solutions to these issues. These solutions would typically be proposed amendments to codes and standards. The process is continuous because as technology and the state of safety knowledge develops there will be a need to monitor the applicationmore » of codes and standards and improve them based on information gathered during their application. This paper will discuss code issues that have surfaced through hydrogen technologies infrastructure project deployment and potential code changes that would address these issues. The issues that this paper will address include (1) setback distances for bulk hydrogen storage, (2) code mandated hazard analyses, (3) sensor placement and communication, (4) the use of approved equipment, and (5) system monitoring and maintenance requirements.« less

Measuring Impact of U.S. DOE Geothermal Technologies Office Funding: Considerations for Development of a Geothermal Resource Reporting Metric

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, Katherine R.; Wall, Anna M.; Dobson, Patrick F.

This paper reviews existing methodologies and reporting codes used to describe extracted energy resources such as coal and oil and describes a comparable proposed methodology to describe geothermal resources. The goal is to provide the U.S. Department of Energy's (DOE) Geothermal Technologies Office (GTO) with a consistent and comprehensible means of assessing the impacts of its funding programs. This framework will allow for GTO to assess the effectiveness of research, development, and deployment (RD&D) funding, prioritize funding requests, and demonstrate the value of RD&D programs to the U.S. Congress. Standards and reporting codes used in other countries and energy sectorsmore » provide guidance to inform development of a geothermal methodology, but industry feedback and our analysis suggest that the existing models have drawbacks that should be addressed. In order to formulate a comprehensive metric for use by GTO, we analyzed existing resource assessments and reporting methodologies for the geothermal, mining, and oil and gas industries, and we sought input from industry, investors, academia, national labs, and other government agencies. Using this background research as a guide, we describe a methodology for assessing and reporting on GTO funding according to resource knowledge and resource grade (or quality). This methodology would allow GTO to target funding or measure impact by progression of projects or geological potential for development.« less

Perceptual video quality assessment in H.264 video coding standard using objective modeling.

PubMed

Karthikeyan, Ramasamy; Sainarayanan, Gopalakrishnan; Deepa, Subramaniam Nachimuthu

2014-01-01

Since usage of digital video is wide spread nowadays, quality considerations have become essential, and industry demand for video quality measurement is rising. This proposal provides a method of perceptual quality assessment in H.264 standard encoder using objective modeling. For this purpose, quality impairments are calculated and a model is developed to compute the perceptual video quality metric based on no reference method. Because of the shuttle difference between the original video and the encoded video the quality of the encoded picture gets degraded, this quality difference is introduced by the encoding process like Intra and Inter prediction. The proposed model takes into account of the artifacts introduced by these spatial and temporal activities in the hybrid block based coding methods and an objective modeling of these artifacts into subjective quality estimation is proposed. The proposed model calculates the objective quality metric using subjective impairments; blockiness, blur and jerkiness compared to the existing bitrate only calculation defined in the ITU G 1070 model. The accuracy of the proposed perceptual video quality metrics is compared against popular full reference objective methods as defined by VQEG.

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

48 CFR 452.219-70 - Size Standard and NAICS Code Information.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Size Standard and NAICS Code Information. 452.219-70 Section 452.219-70 Federal Acquisition Regulations System DEPARTMENT OF... System Code(s) and business size standard(s) describing the products and/or services to be acquired under...

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

Numerical, Analytical, Experimental Study of Fluid Dynamic Forces in Seals Volume 6: Description of Scientific CFD Code SCISEAL

NASA Technical Reports Server (NTRS)

Athavale, Mahesh; Przekwas, Andrzej

2004-01-01

The objectives of the program were to develop computational fluid dynamics (CFD) codes and simpler industrial codes for analyzing and designing advanced seals for air-breathing and space propulsion engines. The CFD code SCISEAL is capable of producing full three-dimensional flow field information for a variety of cylindrical configurations. An implicit multidomain capability allow the division of complex flow domains to allow optimum use of computational cells. SCISEAL also has the unique capability to produce cross-coupled stiffness and damping coefficients for rotordynamic computations. The industrial codes consist of a series of separate stand-alone modules designed for expeditious parametric analyses and optimization of a wide variety of cylindrical and face seals. Coupled through a Knowledge-Based System (KBS) that provides a user-friendly Graphical User Interface (GUI), the industrial codes are PC based using an OS/2 operating system. These codes were designed to treat film seals where a clearance exists between the rotating and stationary components. Leakage is inhibited by surface roughness, small but stiff clearance films, and viscous pumping devices. The codes have demonstrated to be a valuable resource for seal development of future air-breathing and space propulsion engines.

Membrane applications and research in food processing: An assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohr, C.M.; Leeper, S.A.; Engelau, D.E.

This assessment is intended to aid in planning separations research and development projects aimed at reducing energy consumption in the food industry. The food processing industry uses approximately 1.5 quadrillion Btu per year, 2% of the US national annual energy consumption. Food processing involves a variety of liquid feed, product, and waste streams and makes extensive use of thermal operations such as drying, evaporation, pasteurization, and distillation. As such, it is a candidate for energy conservation through the use of membrane separations. The assessment is organized according to Standard Industry Classification (SIC) Code for the food industry. Individual subindustries consideredmore » are: (a) Meat Processing, Dairy Products, Preserved Fruit and Vegetables, Grain Milling, Bakery Products, Sugar and Confectionery products, Edible Fats and Oils, and Beverages. Topics covered include: (a) background information on food processing and membrane separations, (b) a review of current and developing membrane separations for the food industry, (c) energy consumption and processes used in individual subindustries, (d) separations in the subindustries that could be augmented or replaced by membrane processes, (e) industry practices and market conditions that could affect adoption of new technologies, and (f) prioritized recommendations for DOE-OIP supported research to further use of membrane separations in the food industry. 435 refs.« less

Solving Problems With SINDA/FLUINT

NASA Technical Reports Server (NTRS)

2002-01-01

SINDA/FLUINT, the NASA standard software system for thermohydraulic analysis, provides computational simulation of interacting thermal and fluid effects in designs modeled as heat transfer and fluid flow networks. The product saves time and money by making the user's design process faster and easier, and allowing the user to gain a better understanding of complex systems. The code is completely extensible, allowing the user to choose the features, accuracy and approximation levels, and outputs. Users can also add their own customizations as needed to handle unique design tasks or to automate repetitive tasks. Applications for SINDA/FLUINT include the pharmaceutical, petrochemical, biomedical, electronics, and energy industries. The system has been used to simulate nuclear reactors, windshield wipers, and human windpipes. In the automotive industry, it simulates the transient liquid/vapor flows within air conditioning systems.

49 CFR Appendix C to Part 215 - FRA Freight Car Standards Defect Code

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false FRA Freight Car Standards Defect Code C Appendix C... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Pt. 215, App. C Appendix C to Part 215—FRA Freight Car Standards Defect Code The following defect code has been established for use...

49 CFR Appendix C to Part 215 - FRA Freight Car Standards Defect Code

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false FRA Freight Car Standards Defect Code C Appendix C... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Pt. 215, App. C Appendix C to Part 215—FRA Freight Car Standards Defect Code The following defect code has been established for use...

49 CFR Appendix C to Part 215 - FRA Freight Car Standards Defect Code

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false FRA Freight Car Standards Defect Code C Appendix C... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Pt. 215, App. C Appendix C to Part 215—FRA Freight Car Standards Defect Code The following defect code has been established for use...

49 CFR Appendix C to Part 215 - FRA Freight Car Standards Defect Code

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false FRA Freight Car Standards Defect Code C Appendix C... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Pt. 215, App. C Appendix C to Part 215—FRA Freight Car Standards Defect Code The following defect code has been established for use...

Management methodology for pressure equipment

NASA Astrophysics Data System (ADS)

Bletchly, P. J.

Pressure equipment constitutes a significant investment in capital and a major proportion of potential high-risk plant in many operations and this is particularly so in an alumina refinery. In many jurisdictions pressure equipment is also subject to statutory regulation that imposes obligations on Owners of the equipment with respect to workplace safety. Most modern technical standards and industry codes of practice employ a risk-based approach to support better decision making with respect to pressure equipment. For a management system to be effective it must demonstrate that risk is being managed within acceptable limits.

National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornton, Brian; Halverson, Mark A.; Myer, Michael

Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energy’s (DOE’s) Building Energy Codes Program (BECP). DOE’s BECP supports upgrading building energy codes and standards, and the states’ adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components,more » initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.« less

Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornton, Brian A.; Halverson, Mark A.; Myer, Michael

Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energy’s (DOE’s) Building Energy Codes Program (BECP). DOE’s BECP supports upgrading building energy codes and standards, and the states’ adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components,more » initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.« less

Developing Asbestos Job Exposure Matrix Using Occupation and Industry Specific Exposure Data (1984-2008) in Republic of Korea.

PubMed

Choi, Sangjun; Kang, Dongmug; Park, Donguk; Lee, Hyunhee; Choi, Bongkyoo

2017-03-01

The goal of this study is to develop a general population job-exposure matrix (GPJEM) on asbestos to estimate occupational asbestos exposure levels in the Republic of Korea. Three Korean domestic quantitative exposure datasets collected from 1984 to 2008 were used to build the GPJEM. Exposure groups in collected data were reclassified based on the current Korean Standard Industrial Classification (9 th edition) and the Korean Standard Classification of Occupations code (6 th edition) that is in accordance to international standards. All of the exposure levels were expressed by weighted arithmetic mean (WAM) and minimum and maximum concentrations. Based on the established GPJEM, the 112 exposure groups could be reclassified into 86 industries and 74 occupations. In the 1980s, the highest exposure levels were estimated in "knitting and weaving machine operators" with a WAM concentration of 7.48 fibers/mL (f/mL); in the 1990s, "plastic products production machine operators" with 5.12 f/mL, and in the 2000s "detergents production machine operators" handling talc containing asbestos with 2.45 f/mL. Of the 112 exposure groups, 44 groups had higher WAM concentrations than the Korean occupational exposure limit of 0.1 f/mL. The newly constructed GPJEM which is generated from actual domestic quantitative exposure data could be useful in evaluating historical exposure levels to asbestos and could contribute to improved prediction of asbestos-related diseases among Koreans.

Compensation for Asbestos-Related Diseases in Japan: Utilization of Standard Classifications of Industry and Occupations

PubMed

Sawanyawisuth, Kittisak; Furuya, Sugio; Park, Eun-Kee; Myong, Jun-Pyo; Ramos-Bonilla, Juan Pablo; Chimed Ochir, Odgerel; Takahashi, Ken

2017-07-27

Background: Asbestos-related diseases (ARD) are occupational hazards with high mortality rates. To identify asbestos exposure by previous occupation is the main issue for ARD compensation for workers. This study aimed to identify risk groups by applying standard classifications of industries and occupations to a national database of compensated ARD victims in Japan. Methods: We identified occupations that carry a risk of asbestos exposure according to the International Standard Industrial Classification of All Economic Activities (ISIC). ARD compensation data from Japan between 2006 and 2013 were retrieved. Each compensated worker was classified by job section and group according to the ISIC code. Risk ratios for compensation were calculated according to the percentage of workers compensated because of ARD in each ISIC category. Results: In total, there were 6,916 workers with ARD who received compensation in Japan between 2008 and 2013. ISIC classification section F (construction) had the highest compensated risk ratio of 6.3. Section C (manufacturing) and section F (construction) had the largest number of compensated workers (2,868 and 3,463, respectively). In the manufacturing section C, 9 out of 13 divisions had a risk ratio of more than 1. For ISIC divisions in the construction section, construction of buildings (division 41) had the highest number of workers registering claims (2,504). Conclusion: ISIC classification of occupations that are at risk of developing ARD can be used to identify the actual risk of workers’ compensation at the national level. Creative Commons Attribution License

Final Report. An Integrated Partnership to Create and Lead the Solar Codes and Standards Working Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenthal, Andrew

The DOE grant, “An Integrated Partnership to Create and Lead the Solar Codes and Standards Working Group,” to New Mexico State University created the Solar America Board for Codes and Standards (Solar ABCs). From 2007 – 2013 with funding from this grant, Solar ABCs identified current issues, established a dialogue among key stakeholders, and catalyzed appropriate activities to support the development of codes and standards that facilitated the installation of high quality, safe photovoltaic systems. Solar ABCs brought the following resources to the PV stakeholder community; Formal coordination in the planning or revision of interrelated codes and standards removing “stovemore » pipes” that have only roofing experts working on roofing codes, PV experts on PV codes, fire enforcement experts working on fire codes, etc.; A conduit through which all interested stakeholders were able to see the steps being taken in the development or modification of codes and standards and participate directly in the processes; A central clearing house for new documents, standards, proposed standards, analytical studies, and recommendations of best practices available to the PV community; A forum of experts that invites and welcomes all interested parties into the process of performing studies, evaluating results, and building consensus on standards and code-related topics that affect all aspects of the market; and A biennial gap analysis to formally survey the PV community to identify needs that are unmet and inhibiting the market and necessary technical developments.« less

Industry contributions to aggregate workplace injury and illness rate trends: 1992-2008.

PubMed

Ruser, John W

2014-10-01

Aggregate workplace injury and illness rates have generally declined over the past quarter century. Assessing which industries contributed to these declines is hampered by industry coding changes that broke time series data. Ratios were estimated to convert older incidence rate data to current industry codes and to create long industry time series from data of the BLS Survey of Occupational Injuries and Illnesses. These data were used to assess contributions to aggregate trends from within-industry incidence rate trends and across-industry hours shifts. Hours shifts toward safer industries do not explain aggregate incidence rate declines. Rather declines resulted from within-industry declines. The top 20 contributors out of 307 industries account for 40 percent of the decline and include both goods-producing and service-providing industries. These data help focus future research on industries responsible for rate declines and factors hypothesized as contributing to declines. © Published 2014 by Wiley Periodicals, Inc.

Analysis of dosimetry from the H.B. Robinson unit 2 pressure vessel benchmark using RAPTOR-M3G and ALPAN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fischer, G.A.

2011-07-01

Document available in abstract form only, full text of document follows: The dosimetry from the H. B. Robinson Unit 2 Pressure Vessel Benchmark is analyzed with a suite of Westinghouse-developed codes and data libraries. The radiation transport from the reactor core to the surveillance capsule and ex-vessel locations is performed by RAPTOR-M3G, a parallel deterministic radiation transport code that calculates high-resolution neutron flux information in three dimensions. The cross-section library used in this analysis is the ALPAN library, an Evaluated Nuclear Data File (ENDF)/B-VII.0-based library designed for reactor dosimetry and fluence analysis applications. Dosimetry is evaluated with the industry-standard SNLRMLmore » reactor dosimetry cross-section data library. (authors)« less

Automatic Generation of OpenMP Directives and Its Application to Computational Fluid Dynamics Codes

NASA Technical Reports Server (NTRS)

Yan, Jerry; Jin, Haoqiang; Frumkin, Michael; Yan, Jerry (Technical Monitor)

2000-01-01

The shared-memory programming model is a very effective way to achieve parallelism on shared memory parallel computers. As great progress was made in hardware and software technologies, performance of parallel programs with compiler directives has demonstrated large improvement. The introduction of OpenMP directives, the industrial standard for shared-memory programming, has minimized the issue of portability. In this study, we have extended CAPTools, a computer-aided parallelization toolkit, to automatically generate OpenMP-based parallel programs with nominal user assistance. We outline techniques used in the implementation of the tool and discuss the application of this tool on the NAS Parallel Benchmarks and several computational fluid dynamics codes. This work demonstrates the great potential of using the tool to quickly port parallel programs and also achieve good performance that exceeds some of the commercial tools.

A David and Goliath story: tobacco advertising and self-regulation in Australia.

PubMed Central

Chapman, S

1980-01-01

A small group of health workers succeeded in getting the largest tobacco advertising campaign in Australia banned by testing a clause in the advertising industry's voluntary code of self-regulation. The group complained about a series of cigarette advertisements that featured an Australian entertainer who was popular with the young. Though the tobacco company denied the entertainer's major appeal to the young, the chairman of the Advertising Standards Council ruled that the campaign did breach the code. The delay before the complaint was adjudicated--18 months--contrasted with the speed with which a series of antismoking advertisements had been withdrawn after complaints by a tobacco company's advertisers. MOP UP's victory in this case contains several lessons for people interested in restricting the promotional activities of multinational tobacco companies. Images FIG 1 FIG 2 PMID:7427631

The ethics of the medical-pharmaceutical relationship.

PubMed

Vashi, Neelam A; Latkowski, Jo-Ann M

2012-01-01

Physician interaction with the pharmaceutical industry raises many ethical concerns. This relationship is complex, owing to a pluralism of beliefs held by physicians, patients, and third parties. As a result, determining whether physicians fulfill their responsibilities to both the professional and public communities is an arduous endeavor. In an effort to clarify the situation and provide transparency to this complex relationship, medical and pharmaceutical organizations have enacted their own respective codes and guidelines. Even with adherence to these guidelines, questions remain regarding the codependent relationship that interweaves the pharmaceutical industry with the medical community. Owing to the ever-changing landscape enmeshing product development, scientific advancement, corporate realities and patient care, the proper choice for physicians is rarely obvious; however, to operate to the highest standards, those in the medical community must be candid about relations with the pharmaceutical industry and transparent in their financial interests. Further undertakings should focus not on the eradication of physician-pharmaceutical interaction, but instead on the education of physicians about industry marketing strategies and the delineation of boundaries of these interactions to benefit not the individual physician, but our patients. Copyright © 2012. Published by Elsevier Inc.

Two Perspectives on the Origin of the Standard Genetic Code

NASA Astrophysics Data System (ADS)

Sengupta, Supratim; Aggarwal, Neha; Bandhu, Ashutosh Vishwa

2014-12-01

The origin of a genetic code made it possible to create ordered sequences of amino acids. In this article we provide two perspectives on code origin by carrying out simulations of code-sequence coevolution in finite populations with the aim of examining how the standard genetic code may have evolved from more primitive code(s) encoding a small number of amino acids. We determine the efficacy of the physico-chemical hypothesis of code origin in the absence and presence of horizontal gene transfer (HGT) by allowing a diverse collection of code-sequence sets to compete with each other. We find that in the absence of horizontal gene transfer, natural selection between competing codes distinguished by differences in the degree of physico-chemical optimization is unable to explain the structure of the standard genetic code. However, for certain probabilities of the horizontal transfer events, a universal code emerges having a structure that is consistent with the standard genetic code.

Building Standards and Codes for Energy Conservation

ERIC Educational Resources Information Center

Gross, James G.; Pierlert, James H.

1977-01-01

Current activity intended to lead to energy conservation measures in building codes and standards is reviewed by members of the Office of Building Standards and Codes Services of the National Bureau of Standards. For journal availability see HE 508 931. (LBH)

Technical Support Document for Version 3.6.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2011 CFR

2011-01-01

... Industry Classification System (NAICS) codes: 2007 NAICS codes 2007 NAICS industry titles 3341 Computer and peripheral equipment manufacturing. 33422 Radio and television broadcasting and wireless communications equipment manufacturing. 33429 Other communications equipment manufacturing. 3343 Audio and video equipment...

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2012 CFR

2012-01-01

... Industry Classification System (NAICS) codes: 2007 NAICS codes 2007 NAICS industry titles 3341 Computer and peripheral equipment manufacturing. 33422 Radio and television broadcasting and wireless communications equipment manufacturing. 33429 Other communications equipment manufacturing. 3343 Audio and video equipment...

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2013 CFR

2013-01-01

... Industry Classification System (NAICS) codes: 2007 NAICS codes 2007 NAICS industry titles 3341 Computer and peripheral equipment manufacturing. 33422 Radio and television broadcasting and wireless communications equipment manufacturing. 33429 Other communications equipment manufacturing. 3343 Audio and video equipment...

Data Documentation for Navy Civilian Manpower Study,

DTIC Science & Technology

1986-09-01

Engineering 0830 Mechanical Engineer 0840 Nuclear Engineering 0850 Electrical Engineering 0855 Electronics Engineering 0856 Electronics ...OCCUPATIONAL LEVEL (DONOL) CODES DONOL code Title 1060 Engineering Drafting 1061 Electronics Technician w 1062 Engineering Technician 1063 Industrial...Architect 2314 Electrical Engineer 2315 Electronic Engineer 2316 Industrial Engineer 2317 Mechanical Engineer 2318

Bar code, good for industry and trade--how does it benefit the dentist?

PubMed

Oehlmann, H

2001-10-01

Every dentist who attentively follows the change in product labelling can easily see that the HIBC bar code is on the increase. In fact, according to information from FIDE/VDDI and ADE/BVD, the dental industry and trade are firmly resolved to apply the HIBC bar code to all products used internationally in dental practices. Why? Indeed, at first it looks like extra expense to additionally print a bar code on the packages. Good reasons can only lie in advantages which manufacturers and the trade expect from the HIBC bar code, Indications in dental technician circles are that the HIBC bar code is coming. If there are advantages, what are these, and can the dentist also profit from them? What does HIBC bar code mean and what items of interest does it include? What does bar code cost and does only one code exist? This is explained briefly, concentrating on the benefits bar code can bring for different users.

Development of code evaluation criteria for assessing predictive capability and performance

NASA Technical Reports Server (NTRS)

Lin, Shyi-Jang; Barson, S. L.; Sindir, M. M.; Prueger, G. H.

1993-01-01

Computational Fluid Dynamics (CFD), because of its unique ability to predict complex three-dimensional flows, is being applied with increasing frequency in the aerospace industry. Currently, no consistent code validation procedure is applied within the industry. Such a procedure is needed to increase confidence in CFD and reduce risk in the use of these codes as a design and analysis tool. This final contract report defines classifications for three levels of code validation, directly relating the use of CFD codes to the engineering design cycle. Evaluation criteria by which codes are measured and classified are recommended and discussed. Criteria for selecting experimental data against which CFD results can be compared are outlined. A four phase CFD code validation procedure is described in detail. Finally, the code validation procedure is demonstrated through application of the REACT CFD code to a series of cases culminating in a code to data comparison on the Space Shuttle Main Engine High Pressure Fuel Turbopump Impeller.

Addressing Kitchen Contaminants for Healthy, Low-Energy Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stratton, J. Chris; Singer, Brett C.

2014-01-01

Cooking and cooking burners emit pollutants that can adversely affect indoor air quality in residences and significantly impact occupant health. Effective kitchen exhaust ventilation can reduce exposure to cooking-related air pollutants as an enabling step to healthier, low-energy homes. This report by Lawrence Berkeley National Laboratory identifies barriers to the widespread adoption of kitchen exhaust ventilation technologies and practice and proposes a suite of strategies to overcome these barriers. The recommendations have been vetted by a group of industry, regulatory, health, and research experts and stakeholders who convened for two meetings and provided input and feedback to early drafts ofmore » this document. The most fundamental barriers are (1) the common misconception, based on a sensory perception of risk, that kitchen exhaust when cooking is unnecessary and (2) the lack of a code requirement for kitchen ventilation in most U.S. locations. Highest priority objectives include the following: (1) Raise awareness among the public and the building industry of the need to install and routinely use kitchen ventilation; (2) Incorporate kitchen exhaust ventilation as a requirement of building codes and improve the mechanisms for code enforcement; (3) Provide best practice product and use-behavior guidance to ventilation equipment purchasers and installers, and; (4) Develop test methods and performance targets to advance development of high performance products. A specific, urgent need is the development of an over-the-range microwave that meets the airflow and sound requirements of ASHRAE Standard 62.2.« less

Addressing Kitchen Contaminants for Healthy, Low-Energy Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stratton, J. Chris; Singer, Brett C.

2014-01-01

Cooking and cooking burners emit pollutants that can adversely affect indoor air quality in residences and significantly impact occupant health. Effective kitchen exhaust ventilation can reduce exposure to cooking-related air pollutants as an enabling step to healthier, low-energy homes. This report identifies barriers to the widespread adoption of kitchen exhaust ventilation technologies and practice and proposes a suite of strategies to overcome these barriers. The recommendations have been vetted by a group of industry, regulatory, health, and research experts and stakeholders who convened for two web-based meetings and provided input and feedback to early drafts of this document. The mostmore » fundamental barriers are (1) the common misconception, based on a sensory perception of risk, that kitchen exhaust when cooking is unnecessary and (2) the lack of a code requirement for kitchen ventilation in most US locations. Highest priority objectives include the following: (1) Raise awareness among the public and the building industry of the need to install and routinely use kitchen ventilation; (2) Incorporate kitchen exhaust ventilation as a requirement of building codes and improve the mechanisms for code enforcement; (3) Provide best practice product and use-behavior guidance to ventilation equipment purchasers and installers, and; (4) Develop test methods and performance targets to advance development of high performance products. A specific, urgent need is the development of an over-the-range microwave that meets the airflow and sound requirements of ASHRAE Standard 62.2.« less

SMART on FHIR: a standards-based, interoperable apps platform for electronic health records

PubMed Central

Kreda, David A; Mandl, Kenneth D; Kohane, Isaac S; Ramoni, Rachel B

2016-01-01

Objective In early 2010, Harvard Medical School and Boston Children’s Hospital began an interoperability project with the distinctive goal of developing a platform to enable medical applications to be written once and run unmodified across different healthcare IT systems. The project was called Substitutable Medical Applications and Reusable Technologies (SMART). Methods We adopted contemporary web standards for application programming interface transport, authorization, and user interface, and standard medical terminologies for coded data. In our initial design, we created our own openly licensed clinical data models to enforce consistency and simplicity. During the second half of 2013, we updated SMART to take advantage of the clinical data models and the application-programming interface described in a new, openly licensed Health Level Seven draft standard called Fast Health Interoperability Resources (FHIR). Signaling our adoption of the emerging FHIR standard, we called the new platform SMART on FHIR. Results We introduced the SMART on FHIR platform with a demonstration that included several commercial healthcare IT vendors and app developers showcasing prototypes at the Health Information Management Systems Society conference in February 2014. This established the feasibility of SMART on FHIR, while highlighting the need for commonly accepted pragmatic constraints on the base FHIR specification. Conclusion In this paper, we describe the creation of SMART on FHIR, relate the experience of the vendors and developers who built SMART on FHIR prototypes, and discuss some challenges in going from early industry prototyping to industry-wide production use. PMID:26911829

75 FR 6769 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... To Amend the Hearing Location Rules of the Codes of Arbitration Procedure for Customer and Industry... expand the criteria for selecting a hearing location for an arbitration proceeding. The proposed rule..., 2010. II. Description of the Proposed Rule Change Hearing Location Selection Under the Customer Code...

The proposed coding standard at GSFC

NASA Technical Reports Server (NTRS)

Morakis, J. C.; Helgert, H. J.

1977-01-01

As part of the continuing effort to introduce standardization of spacecraft and ground equipment in satellite systems, NASA's Goddard Space Flight Center and other NASA facilities have supported the development of a set of standards for the use of error control coding in telemetry subsystems. These standards are intended to ensure compatibility between spacecraft and ground encoding equipment, while allowing sufficient flexibility to meet all anticipated mission requirements. The standards which have been developed to date cover the application of block codes in error detection and error correction modes, as well as short and long constraint length convolutional codes decoded via the Viterbi and sequential decoding algorithms, respectively. Included are detailed specifications of the codes, and their implementation. Current effort is directed toward the development of standards covering channels with burst noise characteristics, channels with feedback, and code concatenation.

Market development directory for solar industrial process heat systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The purpose of this directory is to provide a basis for market development activities through a location listing of key trade associations, trade periodicals, and key firms for three target groups. Potential industrial users and potential IPH system designers were identified as the prime targets for market development activities. The bulk of the directory is a listing of these two groups. The third group, solar IPH equipment manufacturers, was included to provide an information source for potential industrial users and potential IPH system designers. Trade associates and their publications are listed for selected four-digit Standard Industrial Code (SIC) industries. Sincemore » industries requiring relatively lower temperature process heat probably will comprise most of the near-term market for solar IPH systems, the 80 SIC's included in this chapter have process temperature requirements less than 350/sup 0/F. Some key statistics and a location list of the largest plants (according to number of employees) in each state are included for 15 of the 80 SIC's. Architectural/engineering and consulting firms are listed which are known to have solar experience. Professional associated and periodicals to which information on solar IPH sytstems may be directed also are included. Solar equipment manufacturers and their associations are listed. The listing is based on the SERI Solar Energy Information Data Base (SEIDB).« less

76 FR 22383 - National Fire Codes: Request for Proposals for Revision of Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-21

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Fire Codes: Request... publishing this notice on behalf of the National Fire Protection Association (NFPA) to announce the NFPA's proposal to revise some of its fire safety codes and standards and requests proposals from the public to...

American Academy of Neurology policy on pharmaceutical and device industry support.

PubMed

Hutchins, J C; Rydell, C M; Griggs, R C; Sagsveen, M; Bernat, J L

2012-03-06

To examine the American Academy of Neurology (AAN)'s prevention and limitation of conflicts of interest (COI) related to relationships with pharmaceutical and medical device manufacturers and other medically related commercial product and service companies (industry). We reviewed the AAN's polices governing its interactions with industry, mechanisms for enforcement, and the recent findings of the board-appointed COI task force, in the context of the 2009 David Rothman and colleagues' article in JAMA, the Council of Medical Specialty Societies (CMSS) Code for Interactions with Companies (Code), efforts of the American Medical Association in this area, and increased public and Congressional scrutiny of physician/physician organizations' relationships with industry. The AAN's Policy on Conflicts of Interest provides 4 mechanisms for addressing COI: avoidance, separation, disclosure, and regulation. The AAN's Principles Governing Academy Relationships with External Sources of Support, including recent amendments proposed by the COI task force, regulate industry interaction with AAN programming, products, and leadership. With the Policy, Principles, and other methods of COI prevention, the AAN meets or exceeds all recommendations of the CMSS Code. With its adherence to the Principles since 2004, the AAN has been a leader among professional medical associations in appropriately managing COI related to interactions with industry. Recent amendments to the Principles maintain the AAN's position as a leader in a time of increased public scrutiny of physicians' and professional medical associations' relationships with industry. The AAN is responsive to the recommendations of the COI task force, and has adopted the CMSS Code.

Review of codes, standards, and regulations for natural gas locomotives.

DOT National Transportation Integrated Search

2014-06-01

This report identified, collected, and summarized relevant international codes, standards, and regulations with potential : applicability to the use of natural gas as a locomotive fuel. Few international or country-specific codes, standards, and regu...

76 FR 32989 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

.../Purpose: The loan, guarantee, or grant application is to obtain financing for infrastructure updates... will be located in Burlington, Iowa. The NAICS industry code for this enterprise is: 311812 (commercial..., Assistant Secretary for Employment and Training. [FR Doc. 2011-13937 Filed 6-6-11; 8:45 am] BILLING CODE...

24 CFR 92.251 - Property standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

24 CFR 92.251 - Property standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

38 CFR 39.63 - Architectural design standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 5000, Building Construction and Safety Code, and the 2002 edition of the National Electrical Code, NFPA... 5000, Building Construction and Safety Code. Where the adopted codes state conflicting requirements... the standards set forth in this section, all applicable local and State building codes and regulations...

38 CFR 39.63 - Architectural design standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 5000, Building Construction and Safety Code, and the 2002 edition of the National Electrical Code, NFPA... 5000, Building Construction and Safety Code. Where the adopted codes state conflicting requirements... the standards set forth in this section, all applicable local and State building codes and regulations...

38 CFR 39.63 - Architectural design standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 5000, Building Construction and Safety Code, and the 2002 edition of the National Electrical Code, NFPA... 5000, Building Construction and Safety Code. Where the adopted codes state conflicting requirements... the standards set forth in this section, all applicable local and State building codes and regulations...

24 CFR 92.251 - Property standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

24 CFR 92.251 - Property standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

HEPLIB `91: International users meeting on the support and environments of high energy physics computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnstad, H.

The purpose of this meeting is to discuss the current and future HEP computing support and environments from the perspective of new horizons in accelerator, physics, and computing technologies. Topics of interest to the Meeting include (but are limited to): the forming of the HEPLIB world user group for High Energy Physic computing; mandate, desirables, coordination, organization, funding; user experience, international collaboration; the roles of national labs, universities, and industry; range of software, Monte Carlo, mathematics, physics, interactive analysis, text processors, editors, graphics, data base systems, code management tools; program libraries, frequency of updates, distribution; distributed and interactive computing, datamore » base systems, user interface, UNIX operating systems, networking, compilers, Xlib, X-Graphics; documentation, updates, availability, distribution; code management in large collaborations, keeping track of program versions; and quality assurance, testing, conventions, standards.« less

HEPLIB 91: International users meeting on the support and environments of high energy physics computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnstad, H.

The purpose of this meeting is to discuss the current and future HEP computing support and environments from the perspective of new horizons in accelerator, physics, and computing technologies. Topics of interest to the Meeting include (but are limited to): the forming of the HEPLIB world user group for High Energy Physic computing; mandate, desirables, coordination, organization, funding; user experience, international collaboration; the roles of national labs, universities, and industry; range of software, Monte Carlo, mathematics, physics, interactive analysis, text processors, editors, graphics, data base systems, code management tools; program libraries, frequency of updates, distribution; distributed and interactive computing, datamore » base systems, user interface, UNIX operating systems, networking, compilers, Xlib, X-Graphics; documentation, updates, availability, distribution; code management in large collaborations, keeping track of program versions; and quality assurance, testing, conventions, standards.« less

Efficient Transition State Optimization of Periodic Structures through Automated Relaxed Potential Energy Surface Scans.

PubMed

Plessow, Philipp N

2018-02-13

This work explores how constrained linear combinations of bond lengths can be used to optimize transition states in periodic structures. Scanning of constrained coordinates is a standard approach for molecular codes with localized basis functions, where a full set of internal coordinates is used for optimization. Common plane wave-codes for periodic boundary conditions almost exlusively rely on Cartesian coordinates. An implementation of constrained linear combinations of bond lengths with Cartesian coordinates is described. Along with an optimization of the value of the constrained coordinate toward the transition states, this allows transition optimization within a single calculation. The approach is suitable for transition states that can be well described in terms of broken and formed bonds. In particular, the implementation is shown to be effective and efficient in the optimization of transition states in zeolite-catalyzed reactions, which have high relevance in industrial processes.

1 CFR 21.14 - Deviations from standard organization of the Code of Federal Regulations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Deviations from standard organization of the... CODIFICATION General Numbering § 21.14 Deviations from standard organization of the Code of Federal Regulations. (a) Any deviation from standard Code of Federal Regulations designations must be approved in advance...

Overview of the H.264/AVC video coding standard

NASA Astrophysics Data System (ADS)

Luthra, Ajay; Topiwala, Pankaj N.

2003-11-01

H.264/MPEG-4 AVC is the latest coding standard jointly developed by the Video Coding Experts Group (VCEG) of ITU-T and Moving Picture Experts Group (MPEG) of ISO/IEC. It uses state of the art coding tools and provides enhanced coding efficiency for a wide range of applications including video telephony, video conferencing, TV, storage (DVD and/or hard disk based), streaming video, digital video creation, digital cinema and others. In this paper an overview of this standard is provided. Some comparisons with the existing standards, MPEG-2 and MPEG-4 Part 2, are also provided.

Requirements for construction of nuclear system components at elevated temperatures (supplement to ASME Code Cases 1592, 1593, 1594, 1595, and 1596)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This standard provides rules for the construction of Class 1 nuclear components, parts, and appurtenances for use at elevated temperatures. This standard is a complete set of requirements only when used in conjunction with Section III of the ASME Boiler and Pressure Vessel Code (ASME Code) and addenda, ASME Code Cases 1592, 1593, 1594, 1595, and 1596, and RDT E 15-2NB. Unmodified paragraphs of the referenced Code Cases are not repeated in this standard but are a part of the requirements of this standard.

44 CFR 206.400 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

Field and Laboratory Testing of Approaches to Smart Whole-House Mechanical Ventilation Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Eric; Fenaughty, Karen; Parker, Danny

Whole-house mechanical ventilation is a critical component to a comprehensive strategy for good indoor air quality (IAQ). However, due to lack of integration with standard heating and cooling systems, and perceptions from a portion of the homebuilding industry about risks related to increased energy use, increased cost, and decreased comfort, voluntary and code-required adoption varies among regions. Smart ventilation controls (SVC) balance energy consumption, comfort, and IAQ by optimizing mechanical ventilation operation to reduce the heating and/or cooling loads, improve management of indoor moisture, and maintain IAQ equivalence according to ASHRAE 62.2.

Field and Laboratory Testing of Approaches to Smart Whole-House Mechanical Ventilation Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Eric; Fenaughty, Karen; Parker, Danny

Whole-house mechanical ventilation is a critical component to a comprehensive strategy for good indoor air quality (IAQ). However, due to lack of integration with standard heating and cooling systems, and perceptions from a portion of the homebuilding industry about risks related to increased energy use, increased cost, and decreased comfort, voluntary and code-required adoption varies amongst regions. Smart ventilation controls (SVC) balance energy consumption, comfort, and IAQ by optimizing mechanical ventilation operation to reduce the heating and/or cooling loads, improve management of indoor moisture, and maintain IAQ equivalence according to ASHRAE 62.2.

The Inverse Problem in Jet Acoustics

NASA Technical Reports Server (NTRS)

Wooddruff, S. L.; Hussaini, M. Y.

2001-01-01

The inverse problem for jet acoustics, or the determination of noise sources from far-field pressure information, is proposed as a tool for understanding the generation of noise by turbulence and for the improved prediction of jet noise. An idealized version of the problem is investigated first to establish the extent to which information about the noise sources may be determined from far-field pressure data and to determine how a well-posed inverse problem may be set up. Then a version of the industry-standard MGB code is used to predict a jet noise source spectrum from experimental noise data.

Non-compliance with the International Code of Marketing of Breast Milk Substitutes is not confined to the infant formula industry.

PubMed

Forsyth, Stewart

2013-06-01

Infant feeding policy and practice continues to be a contentious area of global health care. The infant formula industry is widely considered to be the bête noire with frequent claims that they adopt marketing and sales practices that are not compliant with the WHO Code. However, failure to resolve these issues over three decades suggests that there may be wider systemic failings. Review of published papers, commentaries and reports relating to the implementation and governance of the WHO Code with specific reference to issues of non-compliance. The analysis set out in this paper indicates that there are systemic failings at all levels of the implementation and monitoring process including the failure of WHO to successfully 'urge' governments to implement the Code in its entirety; a lack of political will by Member States to implement and monitor the Code and a lack of formal and transparent governance structures. Non-compliance with the WHO Code is not confined to the infant formula industry and several actions are identified, including the need to address issues of partnership working and the establishment of governance systems that are robust, independent and transparent.

A regional approach to health care reform: the Texas border.

PubMed

Rivera, Jose Luis Manzanares; Zuniga, Genny Carrillo

2015-01-01

The purpose of this article is to analyze health insurance disparities related to labor environment factors in the Texas-Mexico border region. A logistic regression model was performed using microdata from the 2010 American Community Survey to estimate the probability of having employer-based insurance, controlling labor environment factors such as hours worked, occupation industry, and the choice of private, nonprofit or public sector jobs. Industries primarily employing the Mexican American population are less likely to offer employer-based health insurance. These industries have the North American Industry Classification System (NAICS) code 770 construction, including cleaning, and NAICS code 8680, restaurants and other food services. Although it was found that working in public sector industries such as code 9470, administration of justice, public order, and safety, or NAICS code 7860, elementary and secondary schools, improved by 60% the probability of the Mexican American population having employer-based health insurance, these occupations ranked at the bottom of the main occupation list for Mexican Americans. These findings provide evidence that the labor environment plays an important role in understanding current health insurance access limitations within the Mexican American community under 2010 Patient Protection and Affordable Care Act provisions, which are directed to small business and lower-income individuals.

Semiannual Technical Summary, 1 April-30 September 1990 (Royal Norwegian Council for Scientific and Industrial Research)

DTIC Science & Technology

1990-11-01

Royal Norwegian Council for Scientific and Industrial Research (NTNF) ____ AD-A241 670 NORSAR Scientific Report No . 1-90/91 Semiannual Technical...ARPA Order No . 4138 AMD # 16 Program Code No . OF10 Name of Contractor Royal Norwegian Council for Scientific and Industrial Research Effective Date of...Advanced (If applicable) Contract No . F08606-89-C-0005 Research Projects Agency NMRO 8c. ADDRESS (City, State, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS

Universities and Industry: Does the Lambert Code of Governance Meet the Requirements of Good Governance?

ERIC Educational Resources Information Center

Buckland, Roger

2004-01-01

The Lambert Model Code of Governance proposes to institutionalise the dominance of governors from commercial and industrial organisations as core members of compact and effective boards controlling UK universities. It is the latest expression of a fashion for viewing university governance as an overly-simple example of an obsolete system, where…

77 FR 31647 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-29

... includes the retrofit and build-out of the facility, which will be located in Mt. Pleasant, Pennsylvania. The NAICS industry code for this enterprise is: 335911 (storage battery manufacturing). DATES: All..., Assistant Secretary for Employment and Training. [FR Doc. 2012-12917 Filed 5-25-12; 8:45 am] BILLING CODE...

77 FR 1955 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... Product/Purpose: The loan, guarantee, or grant application is to finance building construction and to... Dakota. The NAICS industry code for this enterprise is: 311611 (beef produced in slaughtering plants..., Assistant Secretary for Employment and Training. [FR Doc. 2012-448 Filed 1-11-12; 8:45 am] BILLING CODE 4510...

Common Analysis Tool Being Developed for Aeropropulsion: The National Cycle Program Within the Numerical Propulsion System Simulation Environment

NASA Technical Reports Server (NTRS)

Follen, Gregory J.; Naiman, Cynthia G.

1999-01-01

The NASA Lewis Research Center is developing an environment for analyzing and designing aircraft engines-the Numerical Propulsion System Simulation (NPSS). NPSS will integrate multiple disciplines, such as aerodynamics, structure, and heat transfer, and will make use of numerical "zooming" on component codes. Zooming is the coupling of analyses at various levels of detail. NPSS uses the latest computing and communication technologies to capture complex physical processes in a timely, cost-effective manner. The vision of NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. Through the NASA/Industry Cooperative Effort agreement, NASA Lewis and industry partners are developing a new engine simulation called the National Cycle Program (NCP). NCP, which is the first step toward NPSS and is its initial framework, supports the aerothermodynamic system simulation process for the full life cycle of an engine. U.S. aircraft and airframe companies recognize NCP as the future industry standard common analysis tool for aeropropulsion system modeling. The estimated potential payoff for NCP is a $50 million/yr savings to industry through improved engineering productivity.

Alternative Fuels Data Center: E85 Codes and Standards

Science.gov Websites

Development Equipment Options Equipment Installation Codes, Standards, & Safety Vehicles Laws & ; Incentives Ethanol Codes, Standards, and Safety The U.S. Environmental Protection Agency's (EPA) Office of -Gasoline Blends. The Occupational Safety and Health Administration (OSHA) regulates some fuel-dispensing

Alternative Formats to Achieve More Efficient Energy Codes for Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.; Rosenberg, Michael I.; Halverson, Mark A.

2013-01-26

This paper identifies and examines several formats or structures that could be used to create the next generation of more efficient energy codes and standards for commercial buildings. Pacific Northwest National Laboratory (PNNL) is funded by the U.S. Department of Energy’s Building Energy Codes Program (BECP) to provide technical support to the development of ANSI/ASHRAE/IES Standard 90.1. While the majority of PNNL’s ASHRAE Standard 90.1 support focuses on developing and evaluating new requirements, a portion of its work involves consideration of the format of energy standards. In its current working plan, the ASHRAE 90.1 committee has approved an energy goalmore » of 50% improvement in Standard 90.1-2013 relative to Standard 90.1-2004, and will likely be considering higher improvement targets for future versions of the standard. To cost-effectively achieve the 50% goal in manner that can gain stakeholder consensus, formats other than prescriptive must be considered. Alternative formats that include reducing the reliance on prescriptive requirements may make it easier to achieve these aggressive efficiency levels in new codes and standards. The focus on energy code and standard formats is meant to explore approaches to presenting the criteria that will foster compliance, enhance verification, and stimulate innovation while saving energy in buildings. New formats may also make it easier for building designers and owners to design and build the levels of efficiency called for in the new codes and standards. This paper examines a number of potential formats and structures, including prescriptive, performance-based (with sub-formats of performance equivalency and performance targets), capacity constraint-based, and outcome-based. The paper also discusses the pros and cons of each format from the viewpoint of code users and of code enforcers.« less

Gene-Auto: Automatic Software Code Generation for Real-Time Embedded Systems

NASA Astrophysics Data System (ADS)

Rugina, A.-E.; Thomas, D.; Olive, X.; Veran, G.

2008-08-01

This paper gives an overview of the Gene-Auto ITEA European project, which aims at building a qualified C code generator from mathematical models under Matlab-Simulink and Scilab-Scicos. The project is driven by major European industry partners, active in the real-time embedded systems domains. The Gene- Auto code generator will significantly improve the current development processes in such domains by shortening the time to market and by guaranteeing the quality of the generated code through the use of formal methods. The first version of the Gene-Auto code generator has already been released and has gone thought a validation phase on real-life case studies defined by each project partner. The validation results are taken into account in the implementation of the second version of the code generator. The partners aim at introducing the Gene-Auto results into industrial development by 2010.

Modelling the pressurization induced by solar radiation on above ground installations of LPG pipeline systems

NASA Astrophysics Data System (ADS)

Leporini, M.; Terenzi, A.; Marchetti, B.; Giacchetta, G.; Polonara, F.; Corvaro, F.; Cocci Grifoni, R.

2017-11-01

Pipelining Liquefied Petroleum Gas (LPG) is a mode of LPG transportation more environmentally-friendly than others due to the lower energy consumption and exhaust emissions. Worldwide, there are over 20000 kilometers of LPG pipelines. There are a number of codes that industry follows for the design, fabrication, construction and operation of liquid LPG pipelines. However, no standards exist to modelling particular critical phenomena which can occur on these lines due to external environmental conditions like the solar radiation pressurization. In fact, the solar radiation can expose above ground pipeline sections at pressure values above the maximum Design Pressure with resulting risks and problems. The present work presents an innovative practice suitable for the Oil & Gas industry to modelling the pressurization induced by the solar radiation on above ground LPG pipeline sections with the application to a real case.

[Performance based regulation: a strategy to increase breastfeeding rates].

PubMed

Cobo-Armijo, Fernanda; Charvel, Sofía; Hernández-Ávila, Mauricio

2017-01-01

The decreasing breastfeeding rate in México is of public health concern. In this paper we discus an innovative regulatory approach -Performance Based Regulation- and its application to improve breastfeeding rates. This approach, forces industry to take responsibility for the lack of breastfeeding and its consequences. Failure to comply with this targets results in financial penalties. Applying performance based regulation as a strategy to improve breastfeeding is feasible because: the breastmilk substitutes market is an oligopoly, hence it is easy to identify the contribution of each market participant; the regulation's target population is clearly defined; it has a clear regulatory standard which can be easily evaluated, and sanctions to infringement can be defined under objective parameters. modify public policy, celebrate concertation agreements with the industry, create persuasive sanctions, strengthen enforcement activities and coordinate every action with the International Code of Marketing of Breast-milk Substitutes.

The science behind codes and standards for safe walkways: changes in level, stairways, stair handrails and slip resistance.

PubMed

Nemire, Kenneth; Johnson, Daniel A; Vidal, Keith

2016-01-01

Walkway codes and standards are often created through consensus by committees based on a number of factors, including historical precedence, common practice, cost, and empirical data. The authors maintain that in the formulation of codes and standards that impact pedestrian safety, the results of pertinent scientific research should be given significant weight. This article examines many elements of common walkway codes and standards related to changes in level, stairways, stair handrails, and slip resistance. It identifies which portions are based on or supported by empirical data; and which could benefit from additional scientific research. This article identifies areas in which additional research, codes, and standards may be beneficial to enhance pedestrian safety. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

"I Am Only Ten Years Old": Femininities, Clothing-Fashion Codes and the Intergenerational Gap of Interpretation of Young Girls' Clothes

ERIC Educational Resources Information Center

Rysst, Mari

2010-01-01

Based in experience-near anthropology, this article explores constructions of gender by 10-year-old Norwegian girls who are informed by a developmental discourse and by new clothing-fashion codes. The analysis reveals gaps in aesthetic understanding between the clothing-fashion industry, preteen girls and older generations. The industry seems to…

DOVIS 2.0: an efficient and easy to use parallel virtual screening tool based on AutoDock 4.0.

PubMed

Jiang, Xiaohui; Kumar, Kamal; Hu, Xin; Wallqvist, Anders; Reifman, Jaques

2008-09-08

Small-molecule docking is an important tool in studying receptor-ligand interactions and in identifying potential drug candidates. Previously, we developed a software tool (DOVIS) to perform large-scale virtual screening of small molecules in parallel on Linux clusters, using AutoDock 3.05 as the docking engine. DOVIS enables the seamless screening of millions of compounds on high-performance computing platforms. In this paper, we report significant advances in the software implementation of DOVIS 2.0, including enhanced screening capability, improved file system efficiency, and extended usability. To keep DOVIS up-to-date, we upgraded the software's docking engine to the more accurate AutoDock 4.0 code. We developed a new parallelization scheme to improve runtime efficiency and modified the AutoDock code to reduce excessive file operations during large-scale virtual screening jobs. We also implemented an algorithm to output docked ligands in an industry standard format, sd-file format, which can be easily interfaced with other modeling programs. Finally, we constructed a wrapper-script interface to enable automatic rescoring of docked ligands by arbitrarily selected third-party scoring programs. The significance of the new DOVIS 2.0 software compared with the previous version lies in its improved performance and usability. The new version makes the computation highly efficient by automating load balancing, significantly reducing excessive file operations by more than 95%, providing outputs that conform to industry standard sd-file format, and providing a general wrapper-script interface for rescoring of docked ligands. The new DOVIS 2.0 package is freely available to the public under the GNU General Public License.

Methods and feasibility of collecting occupational data for a large population-based cohort study in the United States: the reasons for geographic and racial differences in stroke study

PubMed Central

2014-01-01

Background Coronary heart disease and stroke are major contributors to preventable mortality. Evidence links work conditions to these diseases; however, occupational data are perceived to be difficult to collect for large population-based cohorts. We report methodological details and the feasibility of conducting an occupational ancillary study for a large U.S. prospective cohort being followed longitudinally for cardiovascular disease and stroke. Methods Current and historical occupational information were collected from active participants of the REasons for Geographic And Racial Differences in Stroke (REGARDS) Study. A survey was designed to gather quality occupational data among this national cohort of black and white men and women aged 45 years and older (enrolled 2003–2007). Trained staff conducted Computer-Assisted Telephone Interviews (CATI). After a brief pilot period, interviewers received additional training in the collection of narrative industry and occupation data before administering the survey to remaining cohort members. Trained coders used a computer-assisted coding system to assign U.S. Census codes for industry and occupation. All data were double coded; discrepant codes were independently resolved. Results Over a 2-year period, 17,648 participants provided consent and completed the occupational survey (87% response rate). A total of 20,427 jobs were assigned Census codes. Inter-rater reliability was 80% for industry and 74% for occupation. Less than 0.5% of the industry and occupation data were uncodable, compared with 12% during the pilot period. Concordance between the current and longest-held jobs was moderately high. The median time to collect employment status plus narrative and descriptive job information by CATI was 1.6 to 2.3 minutes per job. Median time to assign Census codes was 1.3 minutes per rater. Conclusions The feasibility of conducting high-quality occupational data collection and coding for a large heterogeneous population-based sample was demonstrated. We found that training for interview staff was important in ensuring that narrative responses for industry and occupation were adequately specified for coding. Estimates of survey administration time and coding from digital records provide an objective basis for planning future studies. The social and environmental conditions of work are important understudied risk factors that can be feasibly integrated into large population-based health studies. PMID:24512119

Methods and feasibility of collecting occupational data for a large population-based cohort study in the United States: the reasons for geographic and racial differences in stroke study.

PubMed

MacDonald, Leslie A; Pulley, LeaVonne; Hein, Misty J; Howard, Virginia J

2014-02-10

Coronary heart disease and stroke are major contributors to preventable mortality. Evidence links work conditions to these diseases; however, occupational data are perceived to be difficult to collect for large population-based cohorts. We report methodological details and the feasibility of conducting an occupational ancillary study for a large U.S. prospective cohort being followed longitudinally for cardiovascular disease and stroke. Current and historical occupational information were collected from active participants of the REasons for Geographic And Racial Differences in Stroke (REGARDS) Study. A survey was designed to gather quality occupational data among this national cohort of black and white men and women aged 45 years and older (enrolled 2003-2007). Trained staff conducted Computer-Assisted Telephone Interviews (CATI). After a brief pilot period, interviewers received additional training in the collection of narrative industry and occupation data before administering the survey to remaining cohort members. Trained coders used a computer-assisted coding system to assign U.S. Census codes for industry and occupation. All data were double coded; discrepant codes were independently resolved. Over a 2-year period, 17,648 participants provided consent and completed the occupational survey (87% response rate). A total of 20,427 jobs were assigned Census codes. Inter-rater reliability was 80% for industry and 74% for occupation. Less than 0.5% of the industry and occupation data were uncodable, compared with 12% during the pilot period. Concordance between the current and longest-held jobs was moderately high. The median time to collect employment status plus narrative and descriptive job information by CATI was 1.6 to 2.3 minutes per job. Median time to assign Census codes was 1.3 minutes per rater. The feasibility of conducting high-quality occupational data collection and coding for a large heterogeneous population-based sample was demonstrated. We found that training for interview staff was important in ensuring that narrative responses for industry and occupation were adequately specified for coding. Estimates of survey administration time and coding from digital records provide an objective basis for planning future studies. The social and environmental conditions of work are important understudied risk factors that can be feasibly integrated into large population-based health studies.

Patent and product piracy

NASA Astrophysics Data System (ADS)

Ignat, V.

2016-08-01

Advanced industrial countries are affected by technology theft. German industry annually loses more than 50 billion euros. The main causes are industrial espionage and fraudulent copying patents and industrial products. Many Asian countries are profiteering saving up to 65% of production costs. Most affected are small medium enterprises, who do not have sufficient economic power to assert themselves against some powerful countries. International organizations, such as Interpol and World Customs Organization - WCO - work together to combat international economic crime. Several methods of protection can be achieved by registering patents or specific technical methods for recognition of product originality. They have developed more suitable protection, like Hologram, magnetic stripe, barcode, CE marking, digital watermarks, DNA or Nano-technologies, security labels, radio frequency identification, micro color codes, matrix code, cryptographic encodings. The automotive industry has developed the method “Manufactures against Product Piracy”. A sticker on the package features original products and it uses a Data Matrix verifiable barcode. The code can be recorded with a smartphone camera. The smartphone is connected via Internet to a database, where the identification numbers of the original parts are stored.

Design, Development and Analysis of Centrifugal Blower

NASA Astrophysics Data System (ADS)

Baloni, Beena Devendra; Channiwala, Salim Abbasbhai; Harsha, Sugnanam Naga Ramannath

2018-06-01

Centrifugal blowers are widely used turbomachines equipment in all kinds of modern and domestic life. Manufacturing of blowers seldom follow an optimum design solution for individual blower. Although centrifugal blowers are developed as highly efficient machines, design is still based on various empirical and semi empirical rules proposed by fan designers. There are different methodologies used to design the impeller and other components of blowers. The objective of present study is to study explicit design methodologies and tracing unified design to get better design point performance. This unified design methodology is based more on fundamental concepts and minimum assumptions. Parametric study is also carried out for the effect of design parameters on pressure ratio and their interdependency in the design. The code is developed based on a unified design using C programming. Numerical analysis is carried out to check the flow parameters inside the blower. Two blowers, one based on the present design and other on industrial design, are developed with a standard OEM blower manufacturing unit. A comparison of both designs is done based on experimental performance analysis as per IS standard. The results suggest better efficiency and more flow rate for the same pressure head in case of the present design compared with industrial one.

The deployment of a large scale object store at the RAL Tier-1

NASA Astrophysics Data System (ADS)

Dewhurst, A.; Johnson, I.; Adams, J.; Canning, B.; Vasilakakos, G.; Packer, A.

2017-10-01

Since 2014, the RAL Tier-1 has been working on deploying a Ceph backed object store. The aim is to replace Castor for disk-only storage. This new service must be scalable to meet the data demands of the LHC to 2020 and beyond. As well as offering access protocols the LHC experiments currently use, it must also provide industry standard access protocols. In order to keep costs down the service must use erasure coding rather than replication to ensure data reliability. This paper will present details of the storage service setup, which has been named Echo, as well as the experience gained from running it. The RAL Tier-1 has also been developing XrootD and GridFTP plugins for Ceph. Both plugins are built on top of the same libraries that write striped data into Ceph and therefore data written by one protocol will be accessible by the other. In the long term we hope the LHC experiments will migrate to industry standard protocols, therefore these plugins will only provide the features needed by the LHC experiments. This paper will report on the development and testing of these plugins.

Systematically Extracting Metal- and Solvent-Related Occupational Information from Free-Text Responses to Lifetime Occupational History Questionnaires

PubMed Central

Friesen, Melissa C.; Locke, Sarah J.; Tornow, Carina; Chen, Yu-Cheng; Koh, Dong-Hee; Stewart, Patricia A.; Purdue, Mark; Colt, Joanne S.

2014-01-01

Objectives: Lifetime occupational history (OH) questionnaires often use open-ended questions to capture detailed information about study participants’ jobs. Exposure assessors use this information, along with responses to job- and industry-specific questionnaires, to assign exposure estimates on a job-by-job basis. An alternative approach is to use information from the OH responses and the job- and industry-specific questionnaires to develop programmable decision rules for assigning exposures. As a first step in this process, we developed a systematic approach to extract the free-text OH responses and convert them into standardized variables that represented exposure scenarios. Methods: Our study population comprised 2408 subjects, reporting 11991 jobs, from a case–control study of renal cell carcinoma. Each subject completed a lifetime OH questionnaire that included verbatim responses, for each job, to open-ended questions including job title, main tasks and activities (task), tools and equipment used (tools), and chemicals and materials handled (chemicals). Based on a review of the literature, we identified exposure scenarios (occupations, industries, tasks/tools/chemicals) expected to involve possible exposure to chlorinated solvents, trichloroethylene (TCE) in particular, lead, and cadmium. We then used a SAS macro to review the information reported by study participants to identify jobs associated with each exposure scenario; this was done using previously coded standardized occupation and industry classification codes, and a priori lists of associated key words and phrases related to possibly exposed tasks, tools, and chemicals. Exposure variables representing the occupation, industry, and task/tool/chemicals exposure scenarios were added to the work history records of the study respondents. Our identification of possibly TCE-exposed scenarios in the OH responses was compared to an expert’s independently assigned probability ratings to evaluate whether we missed identifying possibly exposed jobs. Results: Our process added exposure variables for 52 occupation groups, 43 industry groups, and 46 task/tool/chemical scenarios to the data set of OH responses. Across all four agents, we identified possibly exposed task/tool/chemical exposure scenarios in 44–51% of the jobs in possibly exposed occupations. Possibly exposed task/tool/chemical exposure scenarios were found in a nontrivial 9–14% of the jobs not in possibly exposed occupations, suggesting that our process identified important information that would not be captured using occupation alone. Our extraction process was sensitive: for jobs where our extraction of OH responses identified no exposure scenarios and for which the sole source of information was the OH responses, only 0.1% were assessed as possibly exposed to TCE by the expert. Conclusions: Our systematic extraction of OH information found useful information in the task/chemicals/tools responses that was relatively easy to extract and that was not available from the occupational or industry information. The extracted variables can be used as inputs in the development of decision rules, especially for jobs where no additional information, such as job- and industry-specific questionnaires, is available. PMID:24590110

SNL/CA Facilities Management Design Standards Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rabb, David; Clark, Eva

2014-12-01

At Sandia National Laboratories in California (SNL/CA), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/CA applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safetymore » and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule.« less

Migration of legacy mumps applications to relational database servers.

PubMed

O'Kane, K C

2001-07-01

An extended implementation of the Mumps language is described that facilitates vendor neutral migration of legacy Mumps applications to SQL-based relational database servers. Implemented as a compiler, this system translates Mumps programs to operating system independent, standard C code for subsequent compilation to fully stand-alone, binary executables. Added built-in functions and support modules extend the native hierarchical Mumps database with access to industry standard, networked, relational database management servers (RDBMS) thus freeing Mumps applications from dependence upon vendor specific, proprietary, unstandardized database models. Unlike Mumps systems that have added captive, proprietary RDMBS access, the programs generated by this development environment can be used with any RDBMS system that supports common network access protocols. Additional features include a built-in web server interface and the ability to interoperate directly with programs and functions written in other languages.

An object oriented fully 3D tomography visual toolkit.

PubMed

Agostinelli, S; Paoli, G

2001-04-01

In this paper we present a modern object oriented component object model (COMM) C + + toolkit dedicated to fully 3D cone-beam tomography. The toolkit allows the display and visual manipulation of analytical phantoms, projection sets and volumetric data through a standard Windows graphical user interface. Data input/output is performed using proprietary file formats but import/export of industry standard file formats, including raw binary, Windows bitmap and AVI, ACR/NEMA DICOMM 3 and NCSA HDF is available. At the time of writing built-in implemented data manipulators include a basic phantom ray-tracer and a Matrox Genesis frame grabbing facility. A COMM plug-in interface is provided for user-defined custom backprojector algorithms: a simple Feldkamp ActiveX control, including source code, is provided as an example; our fast Feldkamp plug-in is also available.

Iterative demodulation and decoding of coded non-square QAM

NASA Technical Reports Server (NTRS)

Li, L.; Divsalar, D.; Dolinar, S.

2003-01-01

Simulation results show that, with iterative demodulation and decoding, coded NS-8QAM performs 0.5 dB better than standard 8QAM and 0.7 dB better than 8PSK at BER= 10(sup -5), when the FEC code is the (15, 11) Hamming code concatenated with a rate-1 accumulator code, while coded NS-32QAM performs 0.25 dB better than standard 32QAM.

Exploring Perceptions of Early-Career Psychiatrists About Their Relationships With the Pharmaceutical Industry.

PubMed

Stark, Thomas Johann; Brownell, Alvin Keith; Brager, Nancy Patricia; Berg, Amanda; Balderston, Rhea; Lockyer, Jocelyn Margot

2016-04-01

The pharmaceutical industry has engaged physicians through medical education, patient care, and medical research. New conflict of interest policy has highlighted the challenges to these relationships. The objective of this study was to explore the perceptions that early career psychiatrists (e.g. those within 5 years of entering practice) have regarding their relationship with the pharmaceutical industry. Data were collected through semi-structured interviews and were analysed using a grounded theory methodology. Interviews were conducted and analyzed in an iterative way using a constant comparison approach in which data were collected and open coded for themes and subthemes. As new interviews were conducted, the themes were applied to data along with emergent themes and previous interviews recoded until additional interviews failed to provide new themes and thematic saturation was achieved. Through axial coding, a process of relating codes (categories and concepts) to each other, the theory was generated to explain the core variable mediating perceptions participants had about the relationship with industry. The participants described increasing frequency of experiences with industry throughout training into practice. Their perceptions developed through training, physician culture, industry promotion, and their own practices. In managing the relationship with industry, participants would either avoid interactions or engage in behaviors aimed to reduce the risk of influence. Maintaining one's professional integrity was the underlying driver used to manage the relationship with industry. Psychiatrists develop perceptions about industry through experience and observation leading them to develop their own strategies to manage these relationships while maintaining their professional integrity.

NAICS Sector 92: Public Administration

EPA Pesticide Factsheets

Find the public administration industries EPA regulations affect, with their North American Industry Classification System (NAICS) code. On those pages you can find a list of laws and regulations that affect your industry as well as compliance information

5 CFR 532.221 - Industries included in regular nonappropriated fund surveys.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Industries included in regular... CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Prevailing Rate Determinations § 532.221 Industries... American Industry Classification System (NAICS) codes in all regular nonappropriated fund wage surveys...

FUNGIBLE AND COMPATIBLE BIOFUELS: LITERATURE SEARCH, SUMMARY, AND RECOMMENDATIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bunting, Bruce G; Bunce, Michael; Barone, Teresa L

2011-04-01

The purpose of the study described in this report is to summarize the various barriers to more widespread distribution of bio-fuels through our common carrier fuel distribution system, which includes pipelines, barges and rail, fuel tankage, and distribution terminals. Addressing these barriers is necessary to allow the more widespread utilization and distribution of bio-fuels, in support of a renewable fuels standard and possible future low-carbon fuel standards. These barriers can be classified into several categories, including operating practice, regulatory, technical, and acceptability barriers. Possible solutions to these issues are discussed; including compatibility evaluation, changes to bio-fuels, regulatory changes, and changesmore » in the distribution system or distribution practices. No actual experimental research has been conducted in the writing of this report, but results are used to develop recommendations for future research and additional study as appropriate. This project addresses recognized barriers to the wider use of bio-fuels in the areas of development of codes and standards, industrial and consumer awareness, and materials compatibility issues.« less

Test Protocols for Advanced Inverter Interoperability Functions – Main Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Jay Dean; Gonzalez, Sigifredo; Ralph, Mark E.

2013-11-01

Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated onmore » grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not currently required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already apparent as some of these inverter capabilities are being incorporated in large demonstration and commercial projects. The test protocols are intended to be used to verify acceptable performance of inverters within the standard framework described in IEC TR 61850-90-7. These test protocols, as they are refined and validated over time, can become precursors for future certification test procedures for DER advanced grid support functions.« less

Test Protocols for Advanced Inverter Interoperability Functions - Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Jay Dean; Gonzalez, Sigifredo; Ralph, Mark E.

2013-11-01

Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated onmore » grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not now required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already apparent as some of these inverter capabilities are being incorporated in large demonstration and commercial projects. The test protocols are intended to be used to verify acceptable performance of inverters within the standard framework described in IEC TR 61850-90-7. These test protocols, as they are refined and validated over time, can become precursors for future certification test procedures for DER advanced grid support functions.« less

JacketSE: An Offshore Wind Turbine Jacket Sizing Tool; Theory Manual and Sample Usage with Preliminary Validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Damiani, Rick

This manual summarizes the theory and preliminary verifications of the JacketSE module, which is an offshore jacket sizing tool that is part of the Wind-Plant Integrated System Design & Engineering Model toolbox. JacketSE is based on a finite-element formulation and on user-prescribed inputs and design standards' criteria (constraints). The physics are highly simplified, with a primary focus on satisfying ultimate limit states and modal performance requirements. Preliminary validation work included comparing industry data and verification against ANSYS, a commercial finite-element analysis package. The results are encouraging, and future improvements to the code are recommended in this manual.

Second NASA Workshop on Wiring for Space Applications

NASA Technical Reports Server (NTRS)

1994-01-01

This document contains the proceedings of the Second NASA Workshop on Wiring for Space Applications held at NASA LeRC in Cleveland, OH, 6-7 Oct. 1993. The workshop was sponsored by NASA Headquarters Code QW Office of Safety and Mission Quality, Technical Standards Division and hosted by NASA LeRC, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry, and academia presented and discussed topics on arc tracking phenomena, wiring system design, insulation constructions, and system protection. Presentation materials provided by the various speakers are included in this document.

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2011 CFR

2011-04-01

... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2014 CFR

2014-04-01

... The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2013 CFR

2013-04-01

... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2012 CFR

2012-04-01

... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2010 CFR

2010-04-01

... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

A 3D-CFD code for accurate prediction of fluid flows and fluid forces in seals

NASA Technical Reports Server (NTRS)

Athavale, M. M.; Przekwas, A. J.; Hendricks, R. C.

1994-01-01

Current and future turbomachinery requires advanced seal configurations to control leakage, inhibit mixing of incompatible fluids and to control the rotodynamic response. In recognition of a deficiency in the existing predictive methodology for seals, a seven year effort was established in 1990 by NASA's Office of Aeronautics Exploration and Technology, under the Earth-to-Orbit Propulsion program, to develop validated Computational Fluid Dynamics (CFD) concepts, codes and analyses for seals. The effort will provide NASA and the U.S. Aerospace Industry with advanced CFD scientific codes and industrial codes for analyzing and designing turbomachinery seals. An advanced 3D CFD cylindrical seal code has been developed, incorporating state-of-the-art computational methodology for flow analysis in straight, tapered and stepped seals. Relevant computational features of the code include: stationary/rotating coordinates, cylindrical and general Body Fitted Coordinates (BFC) systems, high order differencing schemes, colocated variable arrangement, advanced turbulence models, incompressible/compressible flows, and moving grids. This paper presents the current status of code development, code demonstration for predicting rotordynamic coefficients, numerical parametric study of entrance loss coefficients for generic annular seals, and plans for code extensions to labyrinth, damping, and other seal configurations.

University Researchers Approach to Providing Computer Simulations to Industry.

NASA Astrophysics Data System (ADS)

Birdsall, Charles

1996-05-01

University researchers perform in an exploratory mode in developing and applying computer simulations to their research problems. Post-docs and students make codes suited to their problems, and to thesis and article writing, with little code use planned beyond such. Industry product developers want well tested, cleanly applicable simulation codes, with freedom to go to the code developers for bug fixing and improvements (and not to have to hunt for a student who has graduated). Hence, these different modes clash; some cushion of understanding and new elements are needed to effect broader, continuing use of university developed codes. We and others have evolved approaches that appear to work, including providing free software, but with follow-ups done by small companies. (See Ref. 1 for more.) We will present our development of plasma device codes over 15 years, evolving into free distribution on the Internet (Ref. 2) with short courses and workshops; follow-ups are done by a small company (of former students, the code writers). In addition, an example of university code development will be given, that of application of the series (or dipole) resonance to providing plasma surface wave generated plasmas, drawing on decades old research; potential applications will be given. We will present what other university groups are doing and reflections on these modes by modelers and designers in the plasma processing industry (semiconductor manufacturing equipment companies), which is highly empirical at present. All of this interaction is still evolving. 9 Brown J. Browning, Sci.Am. Jan 1996, p.35 www See Internet address http://ptsg.eecs.berkeley.edu thebibliography

Software Certification - Coding, Code, and Coders

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Holzmann, Gerard J.

2011-01-01

We describe a certification approach for software development that has been adopted at our organization. JPL develops robotic spacecraft for the exploration of the solar system. The flight software that controls these spacecraft is considered to be mission critical. We argue that the goal of a software certification process cannot be the development of "perfect" software, i.e., software that can be formally proven to be correct under all imaginable and unimaginable circumstances. More realistically, the goal is to guarantee a software development process that is conducted by knowledgeable engineers, who follow generally accepted procedures to control known risks, while meeting agreed upon standards of workmanship. We target three specific issues that must be addressed in such a certification procedure: the coding process, the code that is developed, and the skills of the coders. The coding process is driven by standards (e.g., a coding standard) and tools. The code is mechanically checked against the standard with the help of state-of-the-art static source code analyzers. The coders, finally, are certified in on-site training courses that include formal exams.

A new DWT/MC/DPCM video compression framework based on EBCOT

NASA Astrophysics Data System (ADS)

Mei, L. M.; Wu, H. R.; Tan, D. M.

2005-07-01

A novel Discrete Wavelet Transform (DWT)/Motion Compensation (MC)/Differential Pulse Code Modulation (DPCM) video compression framework is proposed in this paper. Although the Discrete Cosine Transform (DCT)/MC/DPCM is the mainstream framework for video coders in industry and international standards, the idea of DWT/MC/DPCM has existed for more than one decade in the literature and the investigation is still undergoing. The contribution of this work is twofold. Firstly, the Embedded Block Coding with Optimal Truncation (EBCOT) is used here as the compression engine for both intra- and inter-frame coding, which provides good compression ratio and embedded rate-distortion (R-D) optimization mechanism. This is an extension of the EBCOT application from still images to videos. Secondly, this framework offers a good interface for the Perceptual Distortion Measure (PDM) based on the Human Visual System (HVS) where the Mean Squared Error (MSE) can be easily replaced with the PDM in the R-D optimization. Some of the preliminary results are reported here. They are also compared with benchmarks such as MPEG-2 and MPEG-4 version 2. The results demonstrate that under specified condition the proposed coder outperforms the benchmarks in terms of rate vs. distortion.

Sustainable regulation of construction.

PubMed

2000-11-01

The seminar examined the role building codes and regulations can have in promoting a more sustainable approach to construction, particularly through their application to non-industrial building materials. A range of building materials such as straw, bamboo, rammed earth, adobe, and cob (a mixture of clay and chopped straw) were described and illustrated by slides to show their building potential. The current codes have a prime concern to protect the health and safety of people from the built environment. They have been developed almost exclusively for mainstream industrial materials and methods of construction, which makes them difficult to use with alternative, indigenous, or non-industrial building materials, even though those materials may be considered more sustainable. The argument was put forward that with only one-third of the world population living in modern industrial buildings today, it is not sustainable to re-house the remaining rapidly expanding population in high technology dwellings. Many of the low technology building materials and methods now used by the majority of people in the world need only incremental improvement to be equal or superior to many of their industrial replacements. Since these can be more sustainable methods of building, there needs to be an acceptance of the use of alternative materials, particularly in the developing parts of the world, where they are being rejected for less sustainable industrial methods. However, many codes make it difficult to use non-industrial materials; indeed, many of the industrial materials would not meet the demands that must be now met if they were now being introduced as new materials. Consequently, there is a need to develop codes to facilitate the use of a wider range of materials than in current use, and research is needed to assist this development. Sustainable regulation should take into account the full range of real impacts that materials and systems have in areas such as resource use and depletion, toxicity of the processes that produce them, and their potential for re-use and recyclability.

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

Nurse prescribing ethics and medical marketing.

PubMed

Adams, J

This article suggests that nurse prescribers require an awareness of key concepts in ethics, such as deontology and utilitarianism to reflect on current debates and contribute to them. The principles of biomedical ethics have also been influential in the development of professional codes of conduct. Attention is drawn to the importance of the Association of the British Pharmaceutical Industry's code of practice for the pharmaceutical industry in regulating marketing aimed at prescribers.

Video traffic characteristics of modern encoding standards: H.264/AVC with SVC and MVC extensions and H.265/HEVC.

PubMed

Seeling, Patrick; Reisslein, Martin

2014-01-01

Video encoding for multimedia services over communication networks has significantly advanced in recent years with the development of the highly efficient and flexible H.264/AVC video coding standard and its SVC extension. The emerging H.265/HEVC video coding standard as well as 3D video coding further advance video coding for multimedia communications. This paper first gives an overview of these new video coding standards and then examines their implications for multimedia communications by studying the traffic characteristics of long videos encoded with the new coding standards. We review video coding advances from MPEG-2 and MPEG-4 Part 2 to H.264/AVC and its SVC and MVC extensions as well as H.265/HEVC. For single-layer (nonscalable) video, we compare H.265/HEVC and H.264/AVC in terms of video traffic and statistical multiplexing characteristics. Our study is the first to examine the H.265/HEVC traffic variability for long videos. We also illustrate the video traffic characteristics and statistical multiplexing of scalable video encoded with the SVC extension of H.264/AVC as well as 3D video encoded with the MVC extension of H.264/AVC.

Video Traffic Characteristics of Modern Encoding Standards: H.264/AVC with SVC and MVC Extensions and H.265/HEVC

PubMed Central

2014-01-01

Video encoding for multimedia services over communication networks has significantly advanced in recent years with the development of the highly efficient and flexible H.264/AVC video coding standard and its SVC extension. The emerging H.265/HEVC video coding standard as well as 3D video coding further advance video coding for multimedia communications. This paper first gives an overview of these new video coding standards and then examines their implications for multimedia communications by studying the traffic characteristics of long videos encoded with the new coding standards. We review video coding advances from MPEG-2 and MPEG-4 Part 2 to H.264/AVC and its SVC and MVC extensions as well as H.265/HEVC. For single-layer (nonscalable) video, we compare H.265/HEVC and H.264/AVC in terms of video traffic and statistical multiplexing characteristics. Our study is the first to examine the H.265/HEVC traffic variability for long videos. We also illustrate the video traffic characteristics and statistical multiplexing of scalable video encoded with the SVC extension of H.264/AVC as well as 3D video encoded with the MVC extension of H.264/AVC. PMID:24701145

Development of advanced structural analysis methodologies for predicting widespread fatigue damage in aircraft structures

NASA Technical Reports Server (NTRS)

Harris, Charles E.; Starnes, James H., Jr.; Newman, James C., Jr.

1995-01-01

NASA is developing a 'tool box' that includes a number of advanced structural analysis computer codes which, taken together, represent the comprehensive fracture mechanics capability required to predict the onset of widespread fatigue damage. These structural analysis tools have complementary and specialized capabilities ranging from a finite-element-based stress-analysis code for two- and three-dimensional built-up structures with cracks to a fatigue and fracture analysis code that uses stress-intensity factors and material-property data found in 'look-up' tables or from equations. NASA is conducting critical experiments necessary to verify the predictive capabilities of the codes, and these tests represent a first step in the technology-validation and industry-acceptance processes. NASA has established cooperative programs with aircraft manufacturers to facilitate the comprehensive transfer of this technology by making these advanced structural analysis codes available to industry.

A Character Segmentation Proposal for High-Speed Visual Monitoring of Expiration Codes on Beverage Cans.

PubMed

Rodríguez-Rodríguez, José C; Quesada-Arencibia, Alexis; Moreno-Díaz, Roberto; García, Carmelo R

2016-04-13

Expiration date labels are ubiquitous in the food industry. With the passage of time, almost any food becomes unhealthy, even when well preserved. The expiration date is estimated based on the type and manufacture/packaging time of that particular food unit. This date is then printed on the container so it is available to the end user at the time of consumption. MONICOD (MONItoring of CODes); an industrial validator of expiration codes; allows the expiration code printed on a drink can to be read. This verification occurs immediately after printing. MONICOD faces difficulties due to the high printing rate (35 cans per second) and problematic lighting caused by the metallic surface on which the code is printed. This article describes a solution that allows MONICOD to extract shapes and presents quantitative results for the speed and quality.

Convergence Acceleration and Documentation of CFD Codes for Turbomachinery Applications

NASA Technical Reports Server (NTRS)

Marquart, Jed E.

2005-01-01

The development and analysis of turbomachinery components for industrial and aerospace applications has been greatly enhanced in recent years through the advent of computational fluid dynamics (CFD) codes and techniques. Although the use of this technology has greatly reduced the time required to perform analysis and design, there still remains much room for improvement in the process. In particular, there is a steep learning curve associated with most turbomachinery CFD codes, and the computation times need to be reduced in order to facilitate their integration into standard work processes. Two turbomachinery codes have recently been developed by Dr. Daniel Dorney (MSFC) and Dr. Douglas Sondak (Boston University). These codes are entitled Aardvark (for 2-D and quasi 3-D simulations) and Phantom (for 3-D simulations). The codes utilize the General Equation Set (GES), structured grid methodology, and overset O- and H-grids. The codes have been used with success by Drs. Dorney and Sondak, as well as others within the turbomachinery community, to analyze engine components and other geometries. One of the primary objectives of this study was to establish a set of parametric input values which will enhance convergence rates for steady state simulations, as well as reduce the runtime required for unsteady cases. The goal is to reduce the turnaround time for CFD simulations, thus permitting more design parametrics to be run within a given time period. In addition, other code enhancements to reduce runtimes were investigated and implemented. The other primary goal of the study was to develop enhanced users manuals for Aardvark and Phantom. These manuals are intended to answer most questions for new users, as well as provide valuable detailed information for the experienced user. The existence of detailed user s manuals will enable new users to become proficient with the codes, as well as reducing the dependency of new users on the code authors. In order to achieve the objectives listed, the following tasks were accomplished: 1) Parametric Study Of Preconditioning Parameters And Other Code Inputs; 2) Code Modifications To Reduce Runtimes; 3) Investigation Of Compiler Options To Reduce Code Runtime; and 4) Development/Enhancement of Users Manuals for Aardvark and Phantom

A commercial building energy standard for Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, J.; Warner, J.L.; Wiel, S.

1998-07-01

Beginning in 1992, the Comission Nacional de Ahorro de Energia (CONAE), or Mexican National Commission for Energy Conservation, developed a national energy standard for commercial buildings, with assistance from USAID and LBNL. The first complete draft of the standard was released for public review in mid-1995. To promote public acceptance of the standard, CONAE held advisory meetings with architects, engineers, and utility representatives, and organized pubic workshops presented by the authors, with support from USAID. In response to industry comments, the standard was revised in late 1997 and is currently under review by CONAE. It is anticipated that the revisedmore » draft will be released again for final public comments in the summer of 1998. The standard will become law one year after it is finalized by CONAE and published in the federal government record. Since Mexico consists of cooling-dominated climates, the standard emphasizes energy-efficient envelope design to control solar and conductive heat gains. The authors extended DOE-2 simulation results for four climates to all of Mexico through regression analysis. Based on these results, they developed a simplified custom budget calculation approach. To facilitate the method's use, a calculation template was devised in a spreadsheet program and distributed to the public. CONAE anticipates that local engineering associations will use this spreadsheet to administer code compliance.« less

78 FR 18252 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

...-AM78 Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System... 2007 North American Industry Classification System (NAICS) codes currently used in Federal Wage System... (OPM) issued a final rule (73 FR 45853) to update the 2002 North American Industry Classification...

The Automatic Parallelisation of Scientific Application Codes Using a Computer Aided Parallelisation Toolkit

NASA Technical Reports Server (NTRS)

Ierotheou, C.; Johnson, S.; Leggett, P.; Cross, M.; Evans, E.; Jin, Hao-Qiang; Frumkin, M.; Yan, J.; Biegel, Bryan (Technical Monitor)

2001-01-01

The shared-memory programming model is a very effective way to achieve parallelism on shared memory parallel computers. Historically, the lack of a programming standard for using directives and the rather limited performance due to scalability have affected the take-up of this programming model approach. Significant progress has been made in hardware and software technologies, as a result the performance of parallel programs with compiler directives has also made improvements. The introduction of an industrial standard for shared-memory programming with directives, OpenMP, has also addressed the issue of portability. In this study, we have extended the computer aided parallelization toolkit (developed at the University of Greenwich), to automatically generate OpenMP based parallel programs with nominal user assistance. We outline the way in which loop types are categorized and how efficient OpenMP directives can be defined and placed using the in-depth interprocedural analysis that is carried out by the toolkit. We also discuss the application of the toolkit on the NAS Parallel Benchmarks and a number of real-world application codes. This work not only demonstrates the great potential of using the toolkit to quickly parallelize serial programs but also the good performance achievable on up to 300 processors for hybrid message passing and directive-based parallelizations.

An assessment of space shuttle flight software development processes

NASA Technical Reports Server (NTRS)

1993-01-01

In early 1991, the National Aeronautics and Space Administration's (NASA's) Office of Space Flight commissioned the Aeronautics and Space Engineering Board (ASEB) of the National Research Council (NRC) to investigate the adequacy of the current process by which NASA develops and verifies changes and updates to the Space Shuttle flight software. The Committee for Review of Oversight Mechanisms for Space Shuttle Flight Software Processes was convened in Jan. 1992 to accomplish the following tasks: (1) review the entire flight software development process from the initial requirements definition phase to final implementation, including object code build and final machine loading; (2) review and critique NASA's independent verification and validation process and mechanisms, including NASA's established software development and testing standards; (3) determine the acceptability and adequacy of the complete flight software development process, including the embedded validation and verification processes through comparison with (1) generally accepted industry practices, and (2) generally accepted Department of Defense and/or other government practices (comparing NASA's program with organizations and projects having similar volumes of software development, software maturity, complexity, criticality, lines of code, and national standards); (4) consider whether independent verification and validation should continue. An overview of the study, independent verification and validation of critical software, and the Space Shuttle flight software development process are addressed. Findings and recommendations are presented.

75 FR 15440 - Guidance for Industry on Standards for Securing the Drug Supply Chain-Standardized Numerical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-29

...] Guidance for Industry on Standards for Securing the Drug Supply Chain--Standardized Numerical... industry entitled ``Standards for Securing the Drug Supply Chain-Standardized Numerical Identification for... the Drug Supply Chain-Standardized Numerical Identification for Prescription Drug Packages.'' In the...

Network configuration management : paving the way to network agility.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maestas, Joseph H.

2007-08-01

Sandia networks consist of nearly nine hundred routers and switches and nearly one million lines of command code, and each line ideally contributes to the capabilities of the network to convey information from one location to another. Sandia's Cyber Infrastructure Development and Deployment organizations recognize that it is therefore essential to standardize network configurations and enforce conformance to industry best business practices and documented internal configuration standards to provide a network that is agile, adaptable, and highly available. This is especially important in times of constrained budgets as members of the workforce are called upon to improve efficiency, effectiveness, andmore » customer focus. Best business practices recommend using the standardized configurations in the enforcement process so that when root cause analysis results in recommended configuration changes, subsequent configuration auditing will improve compliance to the standard. Ultimately, this minimizes mean time to repair, maintains the network security posture, improves network availability, and enables efficient transition to new technologies. Network standardization brings improved network agility, which in turn enables enterprise agility, because the network touches all facets of corporate business. Improved network agility improves the business enterprise as a whole.« less

The U.S. Commercial Air Tour Industry: A Review of Aviation Safety Concerns

PubMed Central

Ballard, Sarah-Blythe

2016-01-01

The U.S. Title 14 Code of Federal Regulations defines commercial air tours as “flight[s] conducted for compensation or hire in an airplane or helicopter where a purpose of the flight is sightseeing.” The incidence of air tour crashes in the United States is disproportionately high relative to similar commercial aviation operations, and air tours operating under Part 91 governance crash significantly more than those governed by Part 135. This paper reviews the government and industry response to four specific areas of air tour safety concern: surveillance of flight operations, pilot factors, regulatory standardization, and maintenance quality assurance. It concludes that the government and industry have successfully addressed many of these tenet issues, most notably by: advancing the operations surveillance infrastructure through implementation of en route, ground-based, and technological surveillance methods; developing Aeronautical Decision Making and cue-based training programs for air tour pilots; consolidating federal air tour regulations under Part 136; and developing public-private partnerships for raising maintenance operating standards and improving quality assurance programs. However, opportunities remain to improve air tour safety by: increasing the number and efficiency of flight surveillance programs; addressing pilot fatigue with more restrictive flight hour limitations for air tour pilots; ensuring widespread uptake of maintenance quality assurance programs, especially among high-risk operators not currently affiliated with private air tour safety programs; and eliminating the 25-mile exception allowing Part 91 operators to conduct commercial air tours without the safety oversight required of Part 135 operators. PMID:24597160

The U.S. commercial air tour industry: a review of aviation safety concerns.

PubMed

Ballard, Sarah-Blythe

2014-02-01

The U.S. Title 14 Code of Federal Regulations defines commercial air tours as "flight[s] conducted for compensation or hire in an airplane or helicopter where a purpose of the flight is sightseeing." The incidence of air tour crashes in the United States is disproportionately high relative to similar commercial aviation operations, and air tours operating under Part 91 governance crash significantly more than those governed by Part 135. This paper reviews the government and industry response to four specific areas of air tour safety concern: surveillance of flight operations, pilot factors, regulatory standardization, and maintenance quality assurance. It concludes that the government and industry have successfully addressed many of these tenet issues, most notably by: advancing the operations surveillance infrastructure through implementation of en route, ground-based, and technological surveillance methods; developing Aeronautical Decision Making and cue-based training programs for air tour pilots; consolidating federal air tour regulations under Part 136; and developing public-private partnerships for raising maintenance operating standards and improving quality assurance programs. However, opportunities remain to improve air tour safety by: increasing the number and efficiency of flight surveillance programs; addressing pilot fatigue with more restrictive flight hour limitations for air tour pilots; ensuring widespread uptake of maintenance quality assurance programs, especially among high-risk operators not currently affiliated with private air tour safety programs; and eliminating the 25-mile exception allowing Part 91 operators to conduct commercial air tours without the safety oversight required of Part 135 operators.

UAF: a generic OPC unified architecture framework

NASA Astrophysics Data System (ADS)

Pessemier, Wim; Deconinck, Geert; Raskin, Gert; Saey, Philippe; Van Winckel, Hans

2012-09-01

As an emerging Service Oriented Architecture (SOA) specically designed for industrial automation and process control, the OPC Unied Architecture specication should be regarded as an attractive candidate for controlling scientic instrumentation. Even though an industry-backed standard such as OPC UA can oer substantial added value to these projects, its inherent complexity poses an important obstacle for adopting the technology. Building OPC UA applications requires considerable eort, even when taking advantage of a COTS Software Development Kit (SDK). The OPC Unied Architecture Framework (UAF) attempts to reduce this burden by introducing an abstraction layer between the SDK and the application code in order to achieve a better separation of the technical and the functional concerns. True to its industrial origin, the primary requirement of the framework is to maintain interoperability by staying close to the standard specications, and by expecting the minimum compliance from other OPC UA servers and clients. UAF can therefore be regarded as a software framework to quickly and comfortably develop and deploy OPC UA-based applications, while remaining compatible to third party OPC UA-compliant toolkits, servers (such as PLCs) and clients (such as SCADA software). In the rst phase, as covered by this paper, only the client-side of UAF has been tackled in order to transparently handle discovery, session management, subscriptions, monitored items etc. We describe the design principles and internal architecture of our open-source software project, the rst results of the framework running at the Mercator Telescope, and we give a preview of the planned server-side implementation.

77 FR 8020 - Semiannual Regulatory Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-13

... Size 3245-AG25 Standards for Utilities Industries. 463 Small Business Size 3245-AG26 Standards... Remediation Services Industries. 465 Small Business Size 3245-AG28 Standards: Real Estate, Rental and Leasing Industries. 466 Small Business Size 3245-AG29 Standards: Educational Services Industries. 467 Small Business...

75 FR 13209 - Proposed Information Collection (Technical Industry Standards) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... (Technical Industry Standards) Activity: Comment Request AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires items offered for...

A Repository of Codes of Ethics and Technical Standards in Health Informatics

PubMed Central

Zaïane, Osmar R.

2014-01-01

We present a searchable repository of codes of ethics and standards in health informatics. It is built using state-of-the-art search algorithms and technologies. The repository will be potentially beneficial for public health practitioners, researchers, and software developers in finding and comparing ethics topics of interest. Public health clinics, clinicians, and researchers can use the repository platform as a one-stop reference for various ethics codes and standards. In addition, the repository interface is built for easy navigation, fast search, and side-by-side comparative reading of documents. Our selection criteria for codes and standards are two-fold; firstly, to maintain intellectual property rights, we index only codes and standards freely available on the internet. Secondly, major international, regional, and national health informatics bodies across the globe are surveyed with the aim of understanding the landscape in this domain. We also look at prevalent technical standards in health informatics from major bodies such as the International Standards Organization (ISO) and the U. S. Food and Drug Administration (FDA). Our repository contains codes of ethics from the International Medical Informatics Association (IMIA), the iHealth Coalition (iHC), the American Health Information Management Association (AHIMA), the Australasian College of Health Informatics (ACHI), the British Computer Society (BCS), and the UK Council for Health Informatics Professions (UKCHIP), with room for adding more in the future. Our major contribution is enhancing the findability of codes and standards related to health informatics ethics by compilation and unified access through the health informatics ethics repository. PMID:25422725

34 CFR 74.42 - Codes of conduct.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Procurement Standards § 74.42 Codes of conduct. The recipient shall maintain written standards of conduct... interest is not substantial or the gift is an unsolicited item of nominal value. The standards of conduct...

22 CFR 518.42 - Codes of conduct.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Procurement Standards § 518.42 Codes of conduct. The recipient shall maintain written standards of conduct... financial interest is not substantial or the gift is an unsolicited item of nominal value. The standards of...

17 CFR 275.204A-1 - Investment adviser codes of ethics.

Code of Federal Regulations, 2011 CFR

2011-04-01

... ethics. 275.204A-1 Section 275.204A-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE... codes of ethics. (a) Adoption of code of ethics. If you are an investment adviser registered or required... enforce a written code of ethics that, at a minimum, includes: (1) A standard (or standards) of business...

Unfiltered Talk--A Challenge to Categories.

ERIC Educational Resources Information Center

McCormick, Kay

A study investigated how and why code switching and mixing occurs between English and Afrikaans in a region of South Africa. In District Six, non-standard Afrikaans seems to be a mixed code, and it is unclear whether non-standard English is a mixed code. Consequently, it is unclear when codes are being switched or mixed. The analysis looks at…

17 CFR 275.204A-1 - Investment adviser codes of ethics.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ethics. 275.204A-1 Section 275.204A-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE... codes of ethics. (a) Adoption of code of ethics. If you are an investment adviser registered or required... enforce a written code of ethics that, at a minimum, includes: (1) A standard (or standards) of business...

17 CFR 275.204A-1 - Investment adviser codes of ethics.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ethics. 275.204A-1 Section 275.204A-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE... codes of ethics. (a) Adoption of code of ethics. If you are an investment adviser registered or required... enforce a written code of ethics that, at a minimum, includes: (1) A standard (or standards) of business...

17 CFR 275.204A-1 - Investment adviser codes of ethics.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ethics. 275.204A-1 Section 275.204A-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE... codes of ethics. (a) Adoption of code of ethics. If you are an investment adviser registered or required... enforce a written code of ethics that, at a minimum, includes: (1) A standard (or standards) of business...

17 CFR 275.204A-1 - Investment adviser codes of ethics.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ethics. 275.204A-1 Section 275.204A-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE... codes of ethics. (a) Adoption of code of ethics. If you are an investment adviser registered or required... enforce a written code of ethics that, at a minimum, includes: (1) A standard (or standards) of business...

An analysis of messages about tobacco in military installation newspapers.

PubMed

Haddock, C Keith; Parker, L Carrie; Taylor, Jennifer E; Poston, Walker S C; Lando, Harry; Talcott, G Wayne

2005-08-01

We sought to gauge the relative attention that tobacco control receives in military newspapers by comparing coverage of tobacco use with that of other health topics of importance to the military. We examined tobacco-related articles and industry advertisements in 793 newspapers published during 1 year at 16 representative military installations (4 Air Force, 6 Army, 2 Marine, 4 Navy). Newspaper content was coded with a standardized coding manual developed through previous research. Tobacco use received the fewest instances of coverage and the least print space in military installation newspapers of all the health topics examined. The primary "message frame" used in tobacco control articles was that smokers are putting themselves at health risk, a theme that has not been found to have a strong effect on smokers. Nearly 10% of the newspapers contained tobacco advertisements. Tobacco control messages are underrepresented in military installation newspapers compared with other health issues. Furthermore, military newspapers send mixed messages to military personnel by providing advertisements for tobacco while also claiming that tobacco use is harmful.

Guidelines for pressure vessel safety assessment

NASA Astrophysics Data System (ADS)

Yukawa, S.

1990-04-01

A technical overview and information on metallic pressure containment vessels and tanks is given. The intent is to provide Occupational Safety and Health Administration (OSHA) personnel and other persons with information to assist in the evaluation of the safety of operating pressure vessels and low pressure storage tanks. The scope is limited to general industrial application vessels and tanks constructed of carbon or low alloy steels and used at temperatures between -75 and 315 C (-100 and 600 F). Information on design codes, materials, fabrication processes, inspection and testing applicable to the vessels and tanks are presented. The majority of the vessels and tanks are made to the rules and requirements of ASME Code Section VIII or API Standard 620. The causes of deterioration and damage in operation are described and methods and capabilities of detecting serious damage and cracking are discussed. Guidelines and recommendations formulated by various groups to inspect for the damages being found and to mitigate the causes and effects of the problems are presented.

Metal-ferroelectric-metal capacitor based persistent memory for electronic product code class-1 generation-2 uhf passive radio-frequency identification tag

NASA Astrophysics Data System (ADS)

Yoon, Bongno; Sung, Man Young; Yeon, Sujin; Oh, Hyun S.; Kwon, Yoonjoo; Kim, Chuljin; Kim, Kyung-Ho

2009-03-01

With the circuits using metal-ferroelectric-metal (MFM) capacitor, rf operational signal properties are almost the same or superior to those of polysilicon-insulator-polysilicon, metal-insulator-metal, and metal-oxide-semiconductor (MOS) capacitors. In electronic product code global class-1 generation-2 uhf radio-frequency identification (RFID) protocols, the MFM can play a crucial role in satisfying the specifications of the inventoried flag's persistence times (Tpt) for each session (S0-S3, SL). In this paper, we propose and design a new MFM capacitor based memory scheme of which persistence time for S1 flag is measured at 2.2 s as well as indefinite for S2, S3, and SL flags during the period of power-on. A ferroelectric random access memory embedded RFID tag chip is fabricated with an industry-standard complementary MOS process. The chip size is around 500×500 μm2 and the measured power consumption is about 10 μW.

Current and anticipated uses of the CATHARE code at EDF and FRAMATOME

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gandrille, J.L.; Vacher, J.L.; Poizat, F.

1997-07-01

This paper presents current industrial applications of the CATHARE code in the fields of Safety Studies and Simulators where the code is intensively used by FRAMATOME, EDF and CEA, the development partners of CATHARE. Future needs in these fields are also recapitulated.

77 FR 34020 - National Fire Codes: Request for Public Input for Revision of Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-08

... Comment periods, there is further opportunity for debate and discussion through the Association Technical... proposed new or revised code or standard to be presented to the NFPA membership for the debate and...

75 FR 28857 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires that items offered...

Documentation of probabilistic fracture mechanics codes used for reactor pressure vessels subjected to pressurized thermal shock loading: Parts 1 and 2. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balkey, K.; Witt, F.J.; Bishop, B.A.

1995-06-01

Significant attention has been focused on the issue of reactor vessel pressurized thermal shock (PTS) for many years. Pressurized thermal shock transient events are characterized by a rapid cooldown at potentially high pressure levels that could lead to a reactor vessel integrity concern for some pressurized water reactors. As a result of regulatory and industry efforts in the early 1980`s, a probabilistic risk assessment methodology has been established to address this concern. Probabilistic fracture mechanics analyses are performed as part of this methodology to determine conditional probability of significant flaw extension for given pressurized thermal shock events. While recent industrymore » efforts are underway to benchmark probabilistic fracture mechanics computer codes that are currently used by the nuclear industry, Part I of this report describes the comparison of two independent computer codes used at the time of the development of the original U.S. Nuclear Regulatory Commission (NRC) pressurized thermal shock rule. The work that was originally performed in 1982 and 1983 to compare the U.S. NRC - VISA and Westinghouse (W) - PFM computer codes has been documented and is provided in Part I of this report. Part II of this report describes the results of more recent industry efforts to benchmark PFM computer codes used by the nuclear industry. This study was conducted as part of the USNRC-EPRI Coordinated Research Program for reviewing the technical basis for pressurized thermal shock (PTS) analyses of the reactor pressure vessel. The work focused on the probabilistic fracture mechanics (PFM) analysis codes and methods used to perform the PTS calculations. An in-depth review of the methodologies was performed to verify the accuracy and adequacy of the various different codes. The review was structured around a series of benchmark sample problems to provide a specific context for discussion and examination of the fracture mechanics methodology.« less

Electronic tagging and integrated product intelligence

NASA Astrophysics Data System (ADS)

Swerdlow, Martin; Weeks, Brian

1996-03-01

The advent of 'intelligent,' electronic data bearing tags is set to revolutionize the way industrial and retail products are identified and tracked throughout their life cycles. The dominant system for unique identification today is the bar code, which is based on printed symbology and regulated by the International Article Numbering Association. Bar codes provide users with significant operational advantages and generate considerable added value to packaging companies, product manufacturers, distributors and retailers, across supply chains in many different sectors, from retailing, to baggage handling and industrial components, e.g., for vehicles or aircraft. Electronic tags offer the potential to: (1) record and store more complex data about the product or any modifications which occur during its life cycle; (2) access (and up-date) stored data in real time in a way which does not involve contact with the product or article; (3) overcome the limitations imposed by systems which rely on line-of-sight access to stored data. Companies are now beginning to consider how electronic data tags can be used, not only to improve the efficiency of their supply chain processes, but also to revolutionize the way they do business. This paper reviews the applications and business opportunities for electronic tags and outlines CEST's strategy for achieving an 'open' standard which will ensure that tags from different vendors can co-exist on an international basis.

Reporting of occupational injury and illness in the semiconductor manufacturing industry.

PubMed

McCurdy, S A; Schenker, M B; Samuels, S J

1991-01-01

In the United States, occupational illness and injury cases meeting specific reporting criteria are recorded on company Occupational Safety and Health Administration (OSHA) 200 logs; case description data are submitted to participating state agencies for coding and entry in the national Supplementary Data System (SDS). We evaluated completeness of reporting (the percentage of reportable cases that were recorded in the company OSHA 200 log) in the semiconductor manufacturing industry by reviewing company health clinic records for 1984 of 10 manufacturing sites of member companies of a national semiconductor manufacturing industry trade association. Of 416 randomly selected work-related cases, 101 met OSHA reporting criteria. Reporting completeness was 60 percent and was lowest for occupational illnesses (44 percent). Case-description data from 150 reported cases were submitted twice to state coding personnel to evaluate coding reliability. Reliability was high (kappa 0.82-0.93) for "nature," "affected body part," "source," and "type" variables. Coding for the SDS appears reliable; reporting completeness may be improved by use of a stepwise approach by company personnel responsible for reporting decisions.

A new code for Galileo

NASA Technical Reports Server (NTRS)

Dolinar, S.

1988-01-01

Over the past six to eight years, an extensive research effort was conducted to investigate advanced coding techniques which promised to yield more coding gain than is available with current NASA standard codes. The delay in Galileo's launch due to the temporary suspension of the shuttle program provided the Galileo project with an opportunity to evaluate the possibility of including some version of the advanced codes as a mission enhancement option. A study was initiated last summer to determine if substantial coding gain was feasible for Galileo and, is so, to recommend a suitable experimental code for use as a switchable alternative to the current NASA-standard code. The Galileo experimental code study resulted in the selection of a code with constant length 15 and rate 1/4. The code parameters were chosen to optimize performance within cost and risk constraints consistent with retrofitting the new code into the existing Galileo system design and launch schedule. The particular code was recommended after a very limited search among good codes with the chosen parameters. It will theoretically yield about 1.5 dB enhancement under idealizing assumptions relative to the current NASA-standard code at Galileo's desired bit error rates. This ideal predicted gain includes enough cushion to meet the project's target of at least 1 dB enhancement under real, non-ideal conditions.

Three decades of the WHO code and marketing of infant formulas.

PubMed

Forsyth, Stewart

2012-05-01

The International Code of Marketing of Breast Milk Substitutes states that governments, non-governmental organizations, experts, consumers and industry need to cooperate in activities aimed at improving infant nutrition. However, the evidence from the last three decades is that of a series of disputes, legal proceedings and boycotts. The purpose of this review is to assess the overall progress in the implementation of the Code and to examine the problematic areas of monitoring, compliance and governance. There are continuing issues of implementation, monitoring and compliance which predominantly reflect weak governance. Many Member States have yet to fully implement the Code recommendations and most States do not have adequate monitoring and reporting mechanisms. Application of the Code in developed countries may be undermined by a lack of consensus on the WHO recommendation of 6 months exclusive breastfeeding. There is evidence of continuing conflict and acrimony, especially between non-government organizations and industry. Measures need to be taken to encourage the Member States to implement the Code and to establish the governance systems that will not only ensure effective implementation and monitoring of the Code, but also deliver the Code within a spirit of participation, collaboration and trust.

AVC/H.264 patent portfolio license

NASA Astrophysics Data System (ADS)

Horn, Lawrence A.

2004-11-01

MPEG LA, LLC recently announced terms of a joint patent license for the AVC (a/k/a H.264) Standard (ISO/IEC IS 14496-10: Information technology -- Coding of audio-visual objects -- Part 10: Advanced Video Coding | ITU-T Rec. H.264: Series H: Audiovisual and Multimedia Systems: Infrastructure of audiovisual services -- Coding of moving video: Advanced video coding for generic audiovisual services). Like MPEG LA"s other licenses, the AVC Patent Portfolio License is offered for the convenience of the marketplace as an alternative enabling users to access essential intellectual property owned by many patent holders under a single license rather than negotiating licenses with each of them individually. The AVC Patent Portfolio License includes essential patents owned by Columbia Innovation Enterprises; Electronics and Telecommunications Research Institute (ETRI); France Télécom, société anonyme; Fujitsu Limited; Koninklijke Philips Electronics N.V.; Matsushita Electric Industrial Co., Ltd.; Microsoft Corporation; Mitsubishi Electric Corporation; Robert Bosch GmbH; Samsung Electronics Co., Ltd.; Sharp Kabushiki Kaisha; Sony Corporation; Toshiba Corporation; and Victor Company of Japan, Limited. MPEG LA"s objective is to provide worldwide access to as much AVC essential intellectual property as possible for the benefit of AVC users. Therefore, any party that believes it has essential patents is welcome to submit them for evaluation of their essentiality and inclusion in the License if found essential.

Application of Aeroelastic Solvers Based on Navier-Stokes Equations

NASA Technical Reports Server (NTRS)

Keith, Theo G., Jr.; Srivastava, Rakesh

1998-01-01

A pre-release version of the Navier-Stokes solver (TURBO) was obtained from MSU. Along with Dr. Milind Bakhle of the University of Toledo, subroutines for aeroelastic analysis were developed and added to the TURBO code to develop versions 1 and 2 of the TURBO-AE code. For specified mode shape, frequency and inter-blade phase angle the code calculates the work done by the fluid on the rotor for a prescribed sinusoidal motion. Positive work on the rotor indicates instability of the rotor. The version 1 of the code calculates the work for in-phase blade motions only. In version 2 of the code, the capability for analyzing all possible inter-blade phase angles, was added. The version 2 of TURBO-AE code was validated and delivered to NASA and the industry partners of the AST project. The capabilities and the features of the code are summarized in Refs. [1] & [2]. To release the version 2 of TURBO-AE, a workshop was organized at NASA Lewis, by Dr. Srivastava and Dr. M. A. Bakhle, both of the University of Toledo, in October of 1996 for the industry partners of NASA Lewis. The workshop provided the potential users of TURBO-AE, all the relevant information required in preparing the input data, executing the code, interpreting the results and bench marking the code on their computer systems. After the code was delivered to the industry partners, user support was also provided. A new version of the Navier-Stokes solver (TURBO) was later released by MSU. This version had significant changes and upgrades over the previous version. This new version was merged with the TURBO-AE code. Also, new boundary conditions for 3-D unsteady non-reflecting boundaries, were developed by researchers from UTRC, Ref. [3]. Time was spent on understanding, familiarizing, executing and implementing the new boundary conditions into the TURBO-AE code. Work was started on the phase lagged (time-shifted) boundary condition version (version 4) of the code. This will allow the users to calculate non-zero interblade phase angles using, only one blade passage for analysis.

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

Implementation of data management and effect on chronic disease coding in a primary care organisation: A parallel cohort observational study.

PubMed

Greiver, Michelle; Wintemute, Kimberly; Aliarzadeh, Babak; Martin, Ken; Khan, Shahriar; Jackson, Dave; Leggett, Jannet; Lambert-Lanning, Anita; Siu, Maggie

2016-10-12

Consistent and standardized coding for chronic conditions is associated with better care; however, coding may currently be limited in electronic medical records (EMRs) used in Canadian primary care.Objectives To implement data management activities in a community-based primary care organisation and to evaluate the effects on coding for chronic conditions. Fifty-nine family physicians in Toronto, Ontario, belonging to a single primary care organisation, participated in the study. The organisation implemented a central analytical data repository containing their EMR data extracted, cleaned, standardized and returned by the Canadian Primary Care Sentinel Surveillance Network (CPCSSN), a large validated primary care EMR-based database. They used reporting software provided by CPCSSN to identify selected chronic conditions and standardized codes were then added back to the EMR. We studied four chronic conditions (diabetes, hypertension, chronic obstructive pulmonary disease and dementia). We compared changes in coding over six months for physicians in the organisation with changes for 315 primary care physicians participating in CPCSSN across Canada. Chronic disease coding within the organisation increased significantly more than in other primary care sites. The adjusted difference in the increase of coding was 7.7% (95% confidence interval 7.1%-8.2%, p < 0.01). The use of standard codes, consisting of the most common diagnostic codes for each condition in the CPCSSN database, increased by 8.9% more (95% CI 8.3%-9.5%, p < 0.01). Data management activities were associated with an increase in standardized coding for chronic conditions. Exploring requirements to scale and spread this approach in Canadian primary care organisations may be worthwhile.

78 FR 28018 - Petition for Exemption From the Vehicle Theft Prevention Standard; Nissan

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... (ECM). Nissan will also install an audible and visible alarm system on the Infiniti QX60 as standard... and transmitted to the BCM. The ECM then requests the BCM to start the encrypted communication. If the encrypted code is correct, the BCM sends an ``OK-code'' and encrypted code to the ECM. If the code is not...

24 CFR 200.926 - Minimum property standards for one and two family dwellings.

Code of Federal Regulations, 2012 CFR

2012-04-01

... property is to be located. (c) Standard for evaluating local or state building codes. The Secretary shall compare a local building code submitted under paragraph (d) of this section or a State code to the list of... each area and subarea on the list. (2) A State or local building code will be partially accepted if it...

24 CFR 200.926 - Minimum property standards for one and two family dwellings.

Code of Federal Regulations, 2014 CFR

2014-04-01

... property is to be located. (c) Standard for evaluating local or state building codes. The Secretary shall compare a local building code submitted under paragraph (d) of this section or a State code to the list of... each area and subarea on the list. (2) A State or local building code will be partially accepted if it...

24 CFR 200.926 - Minimum property standards for one and two family dwellings.

Code of Federal Regulations, 2013 CFR

2013-04-01

... property is to be located. (c) Standard for evaluating local or state building codes. The Secretary shall compare a local building code submitted under paragraph (d) of this section or a State code to the list of... each area and subarea on the list. (2) A State or local building code will be partially accepted if it...

Investigation on the Capability of a Non Linear CFD Code to Simulate Wave Propagation

DTIC Science & Technology

2003-02-01

Linear CFD Code to Simulate Wave Propagation Pedro de la Calzada Pablo Quintana Manuel Antonio Burgos ITP, S.A. Parque Empresarial Fernando avenida...mechanisms above presented, simulation of unsteady aerodynamics with linear and nonlinear CFD codes is an ongoing activity within the turbomachinery industry

29 CFR 510.21 - SIC codes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false SIC codes. 510.21 Section 510.21 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS IMPLEMENTATION OF THE... Classification of Industries § 510.21 SIC codes. (a) The Conference Report specifically cites Puerto Rico's...

Adaptive image coding based on cubic-spline interpolation

NASA Astrophysics Data System (ADS)

Jiang, Jian-Xing; Hong, Shao-Hua; Lin, Tsung-Ching; Wang, Lin; Truong, Trieu-Kien

2014-09-01

It has been investigated that at low bit rates, downsampling prior to coding and upsampling after decoding can achieve better compression performance than standard coding algorithms, e.g., JPEG and H. 264/AVC. However, at high bit rates, the sampling-based schemes generate more distortion. Additionally, the maximum bit rate for the sampling-based scheme to outperform the standard algorithm is image-dependent. In this paper, a practical adaptive image coding algorithm based on the cubic-spline interpolation (CSI) is proposed. This proposed algorithm adaptively selects the image coding method from CSI-based modified JPEG and standard JPEG under a given target bit rate utilizing the so called ρ-domain analysis. The experimental results indicate that compared with the standard JPEG, the proposed algorithm can show better performance at low bit rates and maintain the same performance at high bit rates.

Phenotypic Graphs and Evolution Unfold the Standard Genetic Code as the Optimal

NASA Astrophysics Data System (ADS)

Zamudio, Gabriel S.; José, Marco V.

2018-03-01

In this work, we explicitly consider the evolution of the Standard Genetic Code (SGC) by assuming two evolutionary stages, to wit, the primeval RNY code and two intermediate codes in between. We used network theory and graph theory to measure the connectivity of each phenotypic graph. The connectivity values are compared to the values of the codes under different randomization scenarios. An error-correcting optimal code is one in which the algebraic connectivity is minimized. We show that the SGC is optimal in regard to its robustness and error-tolerance when compared to all random codes under different assumptions.

Improved lossless intra coding for H.264/MPEG-4 AVC.

PubMed

Lee, Yung-Lyul; Han, Ki-Hun; Sullivan, Gary J

2006-09-01

A new lossless intra coding method based on sample-by-sample differential pulse code modulation (DPCM) is presented as an enhancement of the H.264/MPEG-4 AVC standard. The H.264/AVC design includes a multidirectional spatial prediction method to reduce spatial redundancy by using neighboring samples as a prediction for the samples in a block of data to be encoded. In the new lossless intra coding method, the spatial prediction is performed based on samplewise DPCM instead of in the block-based manner used in the current H.264/AVC standard, while the block structure is retained for the residual difference entropy coding process. We show that the new method, based on samplewise DPCM, does not have a major complexity penalty, despite its apparent pipeline dependencies. Experiments show that the new lossless intra coding method reduces the bit rate by approximately 12% in comparison with the lossless intra coding method previously included in the H.264/AVC standard. As a result, the new method is currently being adopted into the H.264/AVC standard in a new enhancement project.

78 FR 49202 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

.... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Conservation Program for Certain Commercial and Industrial... efficiency of certain industrial equipment to conserve the energy resources of the Nation. DATES: DOE will... codification in the U.S. Code, establishes the ``Energy Conservation Program for Certain Industrial Equipment...

Unit-Credit Titles under Program Headings, Directory. Technology Education: Vocational Industrial, Industrial Arts, Home Economics.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg. Curriculum Services Branch.

This directory lists the unit-credit titles of the technology education courses offered in Manitoba, along with their corresponding department codes and course numbers. Sections A through C list the unit-credit titles of the following vocational-industrial clusters: heavy industrial (agriculture, auto body repair, building construction, building…

New Norwegian HSE standard for the offshore industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huse, J.R.

1996-12-31

NORSOK (The competitive standing of the Norwegian offshore sector) is the Norwegian industry initiative to add value, reduce cost and lead time and remove unnecessary activities in offshore field developments and operations. The NORSOK standards are developed by the Norwegian petroleum industry as a part of the NORSOK initiative and are jointly issued by the Norwegian Oil Industry Association and the Federation of Norwegian Engineering Industries. The purpose of the industry standard is to replace the individual oil company specifications for use in existing and future petroleum industry developments, subject to the individual company`s review and application. The NORSOK Health,more » Safety and Environment (HSE) standards covers: Technical Safety, Working Environment, Environmental Care, HSE during Construction. The standards are now being used in ongoing offshore development projects, and the experience with standards shows that the principle aim is being met. The development of standards continues, implementing experience gained.« less

The H.264/AVC advanced video coding standard: overview and introduction to the fidelity range extensions

NASA Astrophysics Data System (ADS)

Sullivan, Gary J.; Topiwala, Pankaj N.; Luthra, Ajay

2004-11-01

H.264/MPEG-4 AVC is the latest international video coding standard. It was jointly developed by the Video Coding Experts Group (VCEG) of the ITU-T and the Moving Picture Experts Group (MPEG) of ISO/IEC. It uses state-of-the-art coding tools and provides enhanced coding efficiency for a wide range of applications, including video telephony, video conferencing, TV, storage (DVD and/or hard disk based, especially high-definition DVD), streaming video, digital video authoring, digital cinema, and many others. The work on a new set of extensions to this standard has recently been completed. These extensions, known as the Fidelity Range Extensions (FRExt), provide a number of enhanced capabilities relative to the base specification as approved in the Spring of 2003. In this paper, an overview of this standard is provided, including the highlights of the capabilities of the new FRExt features. Some comparisons with the existing MPEG-2 and MPEG-4 Part 2 standards are also provided.

The new geographic information system in ETVA VI.PE.

NASA Astrophysics Data System (ADS)

Xagoraris, Zafiris; Soulis, George

2016-08-01

ETVA VI.PE. S.A. is a member of the Piraeus Bank Group of Companies and its activities include designing, developing, exploiting and managing Industrial Areas throughout Greece. Inside ETVA VI.PE.'s thirty-one Industrial Parks there are currently 2,500 manufacturing companies established, with 40,000 employees and € 2.5 billion of invested funds. In each one of the industrial areas ETVA VI.PE guarantees the companies industrial lots of land (sites) with propitious building codes and complete infrastructure networks of water supply, sewerage, paved roads, power supply, communications, cleansing services, etc. The development of Geographical Information System for ETVA VI.PE.'s Industrial Parks started at the beginning of 1992 and consists of three subsystems: Cadastre, that manages the information for the land acquisition of Industrial Areas; Street Layout - Sites, that manages the sites sold to manufacturing companies; Networks, that manages the infrastructure networks (roads, water supply, sewerage etc). The mapping of each Industrial Park is made incorporating state-of-the-art photogrammetric, cartographic and surveying methods and techniques. Passing through the phases of initial design (hybrid GIS) and system upgrade (integrated Gis solution with spatial database), the system is currently operating on a new upgrade (integrated gIS solution with spatial database) that includes redesigning and merging the system's database schemas, along with the creation of central security policies, and the development of a new web GIS application for advanced data entry, highly customisable and standard reports, and dynamic interactive maps. The new GIS bring the company to advanced levels of productivity and introduce the new era for decision making and business management.

Impact of developing a multidisciplinary coded dataset standard on administrative data accuracy for septoplasty, septorhinoplasty and nasal trauma surgery.

PubMed

Nouraei, S A R; Hudovsky, A; Virk, J S; Saleh, H A

2017-04-01

This study aimed to develop a multidisciplinary coded dataset standard for nasal surgery and to assess its impact on data accuracy. An audit of 528 patients undergoing septal and/or inferior turbinate surgery, rhinoplasty and/or septorhinoplasty, and nasal fracture surgery was undertaken. A total of 200 septoplasties, 109 septorhinoplasties, 57 complex septorhinoplasties and 116 nasal fractures were analysed. There were 76 (14.4 per cent) changes to the primary diagnosis. Septorhinoplasties were the most commonly amended procedures. The overall audit-related income change for nasal surgery was £8.78 per patient. Use of a multidisciplinary coded dataset standard revealed that nasal diagnoses were under-coded; a significant proportion of patients received more precise diagnoses following the audit. There was also significant under-coding of both morbidities and revision surgery. The multidisciplinary coded dataset standard approach can improve the accuracy of both data capture and information flow, and, thus, ultimately create a more reliable dataset for use outcomes and health planning.

78 FR 37885 - Approval of American Society of Mechanical Engineers' Code Cases

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

...), standard design certifications, standard design approvals and manufacturing licenses, to use the Code Cases... by the ASME. The three RGs that would be incorporated by reference are RG 1.84, ``Design, Fabrication... nuclear power plant licensees, and applicants for CPs, OLs, COLs, standard design certifications, standard...

Developing Performance Cost Index Targets for ASHRAE Standard 90.1 Appendix G – Performance Rating Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, Michael I.; Hart, Philip R.

2016-02-16

Appendix G, the Performance Rating Method in ASHRAE Standard 90.1 has been updated to make two significant changes for the 2016 edition, to be published in October of 2016. First, it allows Appendix G to be used as a third path for compliance with the standard in addition to rating beyond code building performance. This prevents modelers from having to develop separate building models for code compliance and beyond code programs. Using this new version of Appendix G to show compliance with the 2016 edition of the standard, the proposed building design needs to have a performance cost index (PCI)more » less than targets shown in a new table based on building type and climate zone. The second change is that the baseline design is now fixed at a stable level of performance set approximately equal to the 2004 code. Rather than changing the stringency of the baseline with each subsequent edition of the standard, compliance with new editions will simply require a reduced PCI (a PCI of zero is a net-zero building). Using this approach, buildings of any era can be rated using the same method. The intent is that any building energy code or beyond code program can use this methodology and merely set the appropriate PCI target for their needs. This report discusses the process used to set performance criteria for compliance with ASHRAE Standard 90.1-2016 and suggests a method for demonstrating compliance with other codes and beyond code programs.« less

Developing Performance Cost Index Targets for ASHRAE Standard 90.1 Appendix G – Performance Rating Method - Rev.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, Michael I.; Hart, Philip R.

2016-03-01

Appendix G, the Performance Rating Method in ASHRAE Standard 90.1 has been updated to make two significant changes for the 2016 edition, to be published in October of 2016. First, it allows Appendix G to be used as a third path for compliance with the standard in addition to rating beyond code building performance. This prevents modelers from having to develop separate building models for code compliance and beyond code programs. Using this new version of Appendix G to show compliance with the 2016 edition of the standard, the proposed building design needs to have a performance cost index (PCI)more » less than targets shown in a new table based on building type and climate zone. The second change is that the baseline design is now fixed at a stable level of performance set approximately equal to the 2004 code. Rather than changing the stringency of the baseline with each subsequent edition of the standard, compliance with new editions will simply require a reduced PCI (a PCI of zero is a net-zero building). Using this approach, buildings of any era can be rated using the same method. The intent is that any building energy code or beyond code program can use this methodology and merely set the appropriate PCI target for their needs. This report discusses the process used to set performance criteria for compliance with ASHRAE Standard 90.1-2016 and suggests a method for demonstrating compliance with other codes and beyond code programs.« less

ISO 639-1 and ISO 639-2: International Standards for Language Codes. ISO 15924: International Standard for Names of Scripts.

ERIC Educational Resources Information Center

Byrum, John D.

This paper describes two international standards for the representation of the names of languages. The first (ISO 639-1), published in 1988, provides two-letter codes for 136 languages and was produced primarily to meet terminological needs. The second (ISO 639-2) appeared in late 1998 and includes three-letter codes for 460 languages. This list…

Information Retrieval System for Japanese Standard Disease-Code Master Using XML Web Service

PubMed Central

Hatano, Kenji; Ohe, Kazuhiko

2003-01-01

Information retrieval system of Japanese Standard Disease-Code Master Using XML Web Service is developed. XML Web Service is a new distributed processing system by standard internet technologies. With seamless remote method invocation of XML Web Service, users are able to get the latest disease code master information from their rich desktop applications or internet web sites, which refer to this service. PMID:14728364

Stakeholder analysis for adopting a personal health record standard in Korea.

PubMed

Kang, Min-Jeoung; Jung, Chai Young; Kim, Soyoun; Boo, Yookyung; Lee, Yuri; Kim, Sundo

Interest in health information exchanges (HIEs) is increasing. Several countries have adopted core health data standards with appropriate strategies. This study was conducted to determine the feasibility of a continuity of care record (CCR) as the standard for an electronic version of the official transfer note and the HIE in Korean healthcare. A technical review of the CCR standard and analysis of stakeholders' views were undertaken. Transfer notes were reviewed and matched with CCR standard categories. The standard for the Korean coding system was selected. Stakeholder analysis included an online survey of members of the Korean Society of Medical Informatics, a public hearing to derive opinions of consumers, doctors, vendors, academic societies and policy makers about the policy process, and a focus group meeting with EMR vendors to determine which HIE objects were technically applicable. Data objects in the official transfer note form matched CCR standards. Korean Classification of Diseases, Korean Standard Terminology of Medicine, Electronic Data Interchange code (EDI code), Logical Observation Identifiers Names and Codes, and Korean drug codes (KD code) were recommended as the Korean coding standard.'Social history', 'payers', and 'encounters' were mostly marked as optional or unnecessary sections, and 'allergies', 'alerts', 'medication list', 'problems/diagnoses', 'results',and 'procedures' as mandatory. Unlike the US, 'social history' was considered optional and 'advance directives' mandatory.At the public hearing there was some objection from the Korean Medical Association to the HIE on legal grounds in termsof intellectual property and patients' personal information. Other groups showed positive or neutral responses. Focus group members divided CCR data objects into three phases based onpredicted adoption time in CCR: (i) immediate adoption; (ii) short-term adoption ('alerts', 'family history'); and (iii) long-term adoption ('results', 'advanced directives', 'functional status', 'medical equipment', 'vital signs', 'plan of care', 'social history'). There were no technical problems in generating the CCR standard document from EMRs. Matters of concern that arose from study results should be resolved with time and consultation.

Systematically extracting metal- and solvent-related occupational information from free-text responses to lifetime occupational history questionnaires.

PubMed

Friesen, Melissa C; Locke, Sarah J; Tornow, Carina; Chen, Yu-Cheng; Koh, Dong-Hee; Stewart, Patricia A; Purdue, Mark; Colt, Joanne S

2014-06-01

Lifetime occupational history (OH) questionnaires often use open-ended questions to capture detailed information about study participants' jobs. Exposure assessors use this information, along with responses to job- and industry-specific questionnaires, to assign exposure estimates on a job-by-job basis. An alternative approach is to use information from the OH responses and the job- and industry-specific questionnaires to develop programmable decision rules for assigning exposures. As a first step in this process, we developed a systematic approach to extract the free-text OH responses and convert them into standardized variables that represented exposure scenarios. Our study population comprised 2408 subjects, reporting 11991 jobs, from a case-control study of renal cell carcinoma. Each subject completed a lifetime OH questionnaire that included verbatim responses, for each job, to open-ended questions including job title, main tasks and activities (task), tools and equipment used (tools), and chemicals and materials handled (chemicals). Based on a review of the literature, we identified exposure scenarios (occupations, industries, tasks/tools/chemicals) expected to involve possible exposure to chlorinated solvents, trichloroethylene (TCE) in particular, lead, and cadmium. We then used a SAS macro to review the information reported by study participants to identify jobs associated with each exposure scenario; this was done using previously coded standardized occupation and industry classification codes, and a priori lists of associated key words and phrases related to possibly exposed tasks, tools, and chemicals. Exposure variables representing the occupation, industry, and task/tool/chemicals exposure scenarios were added to the work history records of the study respondents. Our identification of possibly TCE-exposed scenarios in the OH responses was compared to an expert's independently assigned probability ratings to evaluate whether we missed identifying possibly exposed jobs. Our process added exposure variables for 52 occupation groups, 43 industry groups, and 46 task/tool/chemical scenarios to the data set of OH responses. Across all four agents, we identified possibly exposed task/tool/chemical exposure scenarios in 44-51% of the jobs in possibly exposed occupations. Possibly exposed task/tool/chemical exposure scenarios were found in a nontrivial 9-14% of the jobs not in possibly exposed occupations, suggesting that our process identified important information that would not be captured using occupation alone. Our extraction process was sensitive: for jobs where our extraction of OH responses identified no exposure scenarios and for which the sole source of information was the OH responses, only 0.1% were assessed as possibly exposed to TCE by the expert. Our systematic extraction of OH information found useful information in the task/chemicals/tools responses that was relatively easy to extract and that was not available from the occupational or industry information. The extracted variables can be used as inputs in the development of decision rules, especially for jobs where no additional information, such as job- and industry-specific questionnaires, is available. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2014.

More Than Bar Codes: Integrating Global Standards-Based Bar Code Technology Into National Health Information Systems in Ethiopia and Pakistan to Increase End-to-End Supply Chain Visibility.

PubMed

Hara, Liuichi; Guirguis, Ramy; Hummel, Keith; Villanueva, Monica

2017-12-28

The United Nations Population Fund (UNFPA) and the United States Agency for International Development (USAID) DELIVER PROJECT work together to strengthen public health commodity supply chains by standardizing bar coding under a single set of global standards. From 2015, UNFPA and USAID collaborated to pilot test how tracking and tracing of bar coded health products could be operationalized in the public health supply chains of Ethiopia and Pakistan and inform the ecosystem needed to begin full implementation. Pakistan had been using proprietary bar codes for inventory management of contraceptive supplies but transitioned to global standards-based bar codes during the pilot. The transition allowed Pakistan to leverage the original bar codes that were preprinted by global manufacturers as opposed to printing new bar codes at the central warehouse. However, barriers at lower service delivery levels prevented full realization of end-to-end data visibility. Key barriers at the district level were the lack of a digital inventory management system and absence of bar codes at the primary-level packaging level, such as single blister packs. The team in Ethiopia developed an open-sourced smartphone application that allowed the team to scan bar codes using the mobile phone's camera and to push the captured data to the country's data mart. Real-time tracking and tracing occurred from the central warehouse to the Addis Ababa distribution hub and to 2 health centers. These pilots demonstrated that standardized product identification and bar codes can significantly improve accuracy over manual stock counts while significantly streamlining the stock-taking process, resulting in efficiencies. The pilots also showed that bar coding technology by itself is not sufficient to ensure data visibility. Rather, by using global standards for identification and data capture of pharmaceuticals and medical devices, and integrating the data captured into national and global tracking systems, countries are able to lay the foundation for interoperability and ensure a harmonized language between global health stakeholders. © Hara et al.

More Than Bar Codes: Integrating Global Standards-Based Bar Code Technology Into National Health Information Systems in Ethiopia and Pakistan to Increase End-to-End Supply Chain Visibility

PubMed Central

Hara, Liuichi; Guirguis, Ramy; Hummel, Keith; Villanueva, Monica

2017-01-01

The United Nations Population Fund (UNFPA) and the United States Agency for International Development (USAID) DELIVER PROJECT work together to strengthen public health commodity supply chains by standardizing bar coding under a single set of global standards. From 2015, UNFPA and USAID collaborated to pilot test how tracking and tracing of bar coded health products could be operationalized in the public health supply chains of Ethiopia and Pakistan and inform the ecosystem needed to begin full implementation. Pakistan had been using proprietary bar codes for inventory management of contraceptive supplies but transitioned to global standards-based bar codes during the pilot. The transition allowed Pakistan to leverage the original bar codes that were preprinted by global manufacturers as opposed to printing new bar codes at the central warehouse. However, barriers at lower service delivery levels prevented full realization of end-to-end data visibility. Key barriers at the district level were the lack of a digital inventory management system and absence of bar codes at the primary-level packaging level, such as single blister packs. The team in Ethiopia developed an open-sourced smartphone application that allowed the team to scan bar codes using the mobile phone's camera and to push the captured data to the country's data mart. Real-time tracking and tracing occurred from the central warehouse to the Addis Ababa distribution hub and to 2 health centers. These pilots demonstrated that standardized product identification and bar codes can significantly improve accuracy over manual stock counts while significantly streamlining the stock-taking process, resulting in efficiencies. The pilots also showed that bar coding technology by itself is not sufficient to ensure data visibility. Rather, by using global standards for identification and data capture of pharmaceuticals and medical devices, and integrating the data captured into national and global tracking systems, countries are able to lay the foundation for interoperability and ensure a harmonized language between global health stakeholders. PMID:29284701

How scientific evidence is used in Australia to inform public policy on the long distance transportation of animals.

PubMed

Thornber, Peter M; Adams, David B

2008-01-01

Most Australian livestock are transported at some stage in their lives and the attendant risks must be managed. Like other countries, Australia has location-specific challenges for the land transport of animals that derive from general geography and history, quality of the road and rail systems, design of vehicles and handling facilities, competency and experience of drivers and livestock handlers, and pre- and post-journey management of animals. Australia is a large and sparsely populated country and requires a risk-based approach which builds on equivalent outcomes and performance criteria to ensure good welfare for animals during long distance transport. There are shared responsibilities by owners and service providers along the transport chain. Governments work closely with livestock industries, transporters, stock agents, sale yard operators, abattoir owners, feedlot owners and animal welfare organisations to develop and then apply sustainable animal welfare standards and appropriate regulations. The Australian Animal Welfare Strategy sets out a broad and inclusive forum for this to occur in a consultative and cooperative manner and with the necessary input from science. Animal welfare is protected through a combination of codes of practice, appropriate transport standards, industry quality assurance programmes and the enforcement of laws and regulations.

Comparative analysis of structural concrete quality assurance practices on nine nuclear power plant construction projects. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Willenbrock, J.H.; Thomas, H.R. Jr.; Burati, J.L. Jr.

1978-06-01

The basic objective of this research effort was to perform a comparative analysis of the Quality Assurance practices related to the structural concrete phase on nine nuclear power plant projects which are (or have been) under construction in the United States in the past ten years. This analysis identified the response of each Quality Assurance program to the applicable criteria of 10 CFR Part 50, Appendix B as well as to the pertinent regulatory requirements and industry standards. The major emphasis was placed on the construction aspects of the structural concrete phase of each project. The engineering and design aspectsmore » were examined whenever they interfaced with the construction aspects. For those aspects of the Quality Assurance system which can be considered managerial in nature (i.e., organizational relationships, types of Quality Assurance programs, corrective action procedures, etc.) an attempt has been made to present the alternative approaches that were identified. For those aspects of the Quality Assurance system which are technical in nature (i.e., the frequency of testing for slump, compressive strength, etc.) an attempt has been made to present a comparative analysis between projects and in relation to the recommended or mandated practices presented in the appropriate industry codes and standards.« less

Accuracy of external cause-of-injury coding in VA polytrauma patient discharge records.

PubMed

Carlson, Kathleen F; Nugent, Sean M; Grill, Joseph; Sayer, Nina A

2010-01-01

Valid and efficient methods of identifying the etiology of treated injuries are critical for characterizing patient populations and developing prevention and rehabilitation strategies. We examined the accuracy of external cause-of-injury codes (E-codes) in Veterans Health Administration (VHA) administrative data for a population of injured patients. Chart notes and E-codes were extracted for 566 patients treated at any one of four VHA Polytrauma Rehabilitation Center sites between 2001 and 2006. Two expert coders, blinded to VHA E-codes, used chart notes to assign "gold standard" E-codes to injured patients. The accuracy of VHA E-coding was examined based on these gold standard E-codes. Only 382 of 517 (74%) injured patients were assigned E-codes in VHA records. Sensitivity of VHA E-codes varied significantly by site (range: 59%-91%, p < 0.001). Sensitivity was highest for combat-related injuries (81%) and lowest for fall-related injuries (60%). Overall specificity of E-codes was high (92%). E-coding accuracy was markedly higher when we restricted analyses to records that had been assigned VHA E-codes. E-codes may not be valid for ascertaining source-of-injury data for all injuries among VHA rehabilitation inpatients at this time. Enhanced training and policies may ensure more widespread, standardized use and accuracy of E-codes for injured veterans treated in the VHA.

75 FR 34964 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Amendment to...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... Architectural and Industrial Maintenance Coatings Regulations AGENCY: Environmental Protection Agency (EPA... and Architectural and Industrial Maintenance Coatings Regulations. The revision amends 25 Pa. Code Chapter 130, Subchapters B and C (relating to consumer products and architectural and industrial...

Review and Implementation of the Emerging CCSDS Recommended Standard for Multispectral and Hyperspectral Lossless Image Coding

NASA Technical Reports Server (NTRS)

Sanchez, Jose Enrique; Auge, Estanislau; Santalo, Josep; Blanes, Ian; Serra-Sagrista, Joan; Kiely, Aaron

2011-01-01

A new standard for image coding is being developed by the MHDC working group of the CCSDS, targeting onboard compression of multi- and hyper-spectral imagery captured by aircraft and satellites. The proposed standard is based on the "Fast Lossless" adaptive linear predictive compressor, and is adapted to better overcome issues of onboard scenarios. In this paper, we present a review of the state of the art in this field, and provide an experimental comparison of the coding performance of the emerging standard in relation to other state-of-the-art coding techniques. Our own independent implementation of the MHDC Recommended Standard, as well as of some of the other techniques, has been used to provide extensive results over the vast corpus of test images from the CCSDS-MHDC.

39 CFR Appendix A to Part 121 - Tables Depicting Service Standard Day Ranges

Code of Federal Regulations, 2011 CFR

2011-07-01

... 1-3 (AK)7 (JNU) 7 (KTN) 1 (HI)7 (GU) 1-2 1-2 6-7 5-6 Standard Mail 2 3 3 3-4 10 10 9 Package Services 1 2 2 2-3 8 8 7 AK = Alaska 3-digit ZIP Codes 995-997; JNU = Juneau AK 3-digit ZIP Code 998; KTN = Ketchikan AK 3-digit ZIP Code 999; HI = Hawaii 3-digit ZIP Codes 967 and 968; GU = Guam 3-digit ZIP Code 969...

39 CFR Appendix A to Part 121 - Tables Depicting Service Standard Day Ranges

Code of Federal Regulations, 2010 CFR

2010-07-01

... 1-3 (AK)7 (JNU) 7 (KTN) 1 (HI)7 (GU) 1-2 1-2 6-7 5-6 Standard Mail 2 3 3 3-4 10 10 9 Package Services 1 2 2 2-3 8 8 7 AK = Alaska 3-digit ZIP Codes 995-997; JNU = Juneau AK 3-digit ZIP Code 998; KTN = Ketchikan AK 3-digit ZIP Code 999; HI = Hawaii 3-digit ZIP Codes 967 and 968; GU = Guam 3-digit ZIP Code 969...

Standardized reporting using CODES (Crash Outcome Data Evaluation System)

DOT National Transportation Integrated Search

1999-12-01

While CODES projects have expanded to 25 states, there is no standardized reporting of the outcome measures that are available with linked data. This paper describes our efforts to build a standard format for reporting these outcomes. This format is ...

Solid Rocket Motor Combustion Instability Modeling in COMSOL Multiphysics

NASA Technical Reports Server (NTRS)

Fischbach, Sean R.

2015-01-01

Combustion instability modeling of Solid Rocket Motors (SRM) remains a topic of active research. Many rockets display violent fluctuations in pressure, velocity, and temperature originating from the complex interactions between the combustion process, acoustics, and steady-state gas dynamics. Recent advances in defining the energy transport of disturbances within steady flow-fields have been applied by combustion stability modelers to improve the analysis framework [1, 2, 3]. Employing this more accurate global energy balance requires a higher fidelity model of the SRM flow-field and acoustic mode shapes. The current industry standard analysis tool utilizes a one dimensional analysis of the time dependent fluid dynamics along with a quasi-three dimensional propellant grain regression model to determine the SRM ballistics. The code then couples with another application that calculates the eigenvalues of the one dimensional homogenous wave equation. The mean flow parameters and acoustic normal modes are coupled to evaluate the stability theory developed and popularized by Culick [4, 5]. The assumption of a linear, non-dissipative wave in a quiescent fluid remains valid while acoustic amplitudes are small and local gas velocities stay below Mach 0.2. The current study employs the COMSOL multiphysics finite element framework to model the steady flow-field parameters and acoustic normal modes of a generic SRM. The study requires one way coupling of the CFD High Mach Number Flow (HMNF) and mathematics module. The HMNF module evaluates the gas flow inside of a SRM using St. Robert's law to model the solid propellant burn rate, no slip boundary conditions, and the hybrid outflow condition. Results from the HMNF model are verified by comparing the pertinent ballistics parameters with the industry standard code outputs (i.e. pressure drop, thrust, ect.). These results are then used by the coefficient form of the mathematics module to determine the complex eigenvalues of the Acoustic Velocity Potential Equation (AVPE). The mathematics model is truncated at the nozzle sonic line, where a zero flux boundary condition is self-satisfying. The remaining boundaries are modeled with a zero flux boundary condition, assuming zero acoustic absorption on all surfaces. The results of the steady-state CFD and AVPE analyses are used to calculate the linear acoustic growth rate as is defined by Flandro and Jacob [2, 3]. In order to verify the process implemented within COMSOL we first employ the Culick theory and compare the results with the industry standard. After the process is verified, the Flandro/Jacob energy balance theory is employed and results displayed.

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

First NASA Workshop on Wiring for Space Applications

NASA Technical Reports Server (NTRS)

Hammond, Ahmad (Compiler); Stavnes, Mark W. (Compiler)

1994-01-01

This document contains the proceedings of the First NASA Workshop on Wiring for Space Applications held at NASA Lewis Research Center in Cleveland, OH, July 23-24, 1991. The workshop was sponsored by NASA Headquarters Code QE Office of Safety and Mission Quality, Technical Standards Division and hosted by the NASA Lewis Research Center, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry and academia presented and discussed topics on arc tracking phenomena, wiring applications and requirements, and new candidate insulation materials and constructions. Presentation materials provided by the various speakers are included in this document.

Proceedings of the symposium on inservice testing of pumps and valves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-10-01

The 1990 Symposium on Inservice Testing of Pumps and Valves, jointly sponsored by the Board on Nuclear Codes and Standards of the American Society of Mechanical Engineers and by the Nuclear Regulatory Commission, provided a forum for the discussion of current programs and methods for inservice testing at nuclear power plants. The symposium also provided an opportunity to discuss the need to improve inservice testing in order to ensure the reliable performance of pumps and valves. The participation of industry representatives, regulators, and consultants resulted in the discussion of a broad spectrum of ideas and perspectives regarding the improvement ofmore » inservice testing of pumps and valves at nuclear power plants.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bakosi, Jozsef; Christon, Mark A.; Francois, Marianne M.

Progress is reported on computational capabilities for the grid-to-rod-fretting (GTRF) problem of pressurized water reactors. Numeca's Hexpress/Hybrid mesh generator is demonstrated as an excellent alternative to generating computational meshes for complex flow geometries, such as in GTRF. Mesh assessment is carried out using standard industrial computational fluid dynamics practices. Hydra-TH, a simulation code developed at LANL for reactor thermal-hydraulics, is demonstrated on hybrid meshes, containing different element types. A series of new Hydra-TH calculations has been carried out collecting turbulence statistics. Preliminary results on the newly generated meshes are discussed; full analysis will be documented in the L3 milestone, THM.CFD.P5.05,more » Sept. 2012.« less

21 CFR 610.67 - Bar code label requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... or to blood and blood components intended for transfusion. For blood and blood components intended...) BIOLOGICS GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.67 Bar code label requirements. Biological products must comply with the bar code requirements at § 201.25 of this chapter. However, the bar...

21 CFR 610.67 - Bar code label requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... or to blood and blood components intended for transfusion. For blood and blood components intended...) BIOLOGICS GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.67 Bar code label requirements. Biological products must comply with the bar code requirements at § 201.25 of this chapter. However, the bar...

21 CFR 610.67 - Bar code label requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... or to blood and blood components intended for transfusion. For blood and blood components intended...) BIOLOGICS GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.67 Bar code label requirements. Biological products must comply with the bar code requirements at § 201.25 of this chapter. However, the bar...

46 CFR 197.204 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Institute “Code for Pressure Piping, Power Piping.” ASME Code means the American Society of Mechanical Engineers “Boiler and Pressure Vessel Code.” ASME PVHO-1 means the ANSI/ASME standard “Safety Standard for Pressure Vessels for Human Occupancy.” ATA means a measure of pressure expressed in terms of atmosphere...

46 CFR 197.204 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Institute “Code for Pressure Piping, Power Piping.” ASME Code means the American Society of Mechanical Engineers “Boiler and Pressure Vessel Code.” ASME PVHO-1 means the ANSI/ASME standard “Safety Standard for Pressure Vessels for Human Occupancy.” ATA means a measure of pressure expressed in terms of atmosphere...

46 CFR 197.204 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Institute “Code for Pressure Piping, Power Piping.” ASME Code means the American Society of Mechanical Engineers “Boiler and Pressure Vessel Code.” ASME PVHO-1 means the ANSI/ASME standard “Safety Standard for Pressure Vessels for Human Occupancy.” ATA means a measure of pressure expressed in terms of atmosphere...

46 CFR 197.204 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Institute “Code for Pressure Piping, Power Piping.” ASME Code means the American Society of Mechanical Engineers “Boiler and Pressure Vessel Code.” ASME PVHO-1 means the ANSI/ASME standard “Safety Standard for Pressure Vessels for Human Occupancy.” ATA means a measure of pressure expressed in terms of atmosphere...

77 FR 67628 - National Fire Codes: Request for Public Input for Revision of Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-13

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Fire Codes: Request... Technology, Commerce. ACTION: Notice. SUMMARY: This notice contains the list of National Fire Protection... the National Fire Protection Association (NFPA) to announce the NFPA's proposal to revise some of its...

78 FR 24729 - National Fire Codes: Request for Comments on NFPA's Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Fire Codes: Request... this notice on behalf of the National Fire Protection Association (NFPA) to announce the availability...: Since 1896, the National Fire Protection Association (NFPA) has accomplished its mission by advocating...

78 FR 24725 - National Fire Codes: Request for Public Input for Revision of Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Fire Codes: Request... Technology, Commerce. ACTION: Notice. SUMMARY: This notice contains the list of National Fire Protection... the National Fire Protection Association (NFPA) to announce the NFPA's proposal to revise some of its...

7 CFR 1792.103 - Seismic design and construction standards for new buildings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Seismic Regulation for New Buildings. (b) Each of the following model codes or standards provides a level...) 548-2723. Fax: (703) 295-6211. (3) 2003 International Code Council (ICC) International Building Code... buildings. 1792.103 Section 1792.103 Agriculture Regulations of the Department of Agriculture (Continued...

7 CFR 1792.103 - Seismic design and construction standards for new buildings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Seismic Regulation for New Buildings. (b) Each of the following model codes or standards provides a level...) 548-2723. Fax: (703) 295-6211. (3) 2003 International Code Council (ICC) International Building Code... buildings. 1792.103 Section 1792.103 Agriculture Regulations of the Department of Agriculture (Continued...

7 CFR 1792.103 - Seismic design and construction standards for new buildings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Seismic Regulation for New Buildings. (b) Each of the following model codes or standards provides a level...) 548-2723. Fax: (703) 295-6211. (3) 2003 International Code Council (ICC) International Building Code... buildings. 1792.103 Section 1792.103 Agriculture Regulations of the Department of Agriculture (Continued...

7 CFR 1792.103 - Seismic design and construction standards for new buildings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Seismic Regulation for New Buildings. (b) Each of the following model codes or standards provides a level...) 548-2723. Fax: (703) 295-6211. (3) 2003 International Code Council (ICC) International Building Code... buildings. 1792.103 Section 1792.103 Agriculture Regulations of the Department of Agriculture (Continued...

21 CFR 610.67 - Bar code label requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 7 2011-04-01 2010-04-01 true Bar code label requirements. 610.67 Section 610.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.67 Bar code label requirements...

21 CFR 610.67 - Bar code label requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Bar code label requirements. 610.67 Section 610.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.67 Bar code label requirements...

An evolution of technologies and applications of gamma imagers in the nuclear cycle industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalil, R. A.; Carrel, F.; Menaa, N.

The tracking of radiation contamination and distribution has become a high priority in the nuclear cycle industry in order to respect the ALARA principle which is a main challenge during decontamination and dismantling activities. To support this need, AREVA/CANBERRA and CEA LIST have been actively carrying out research and development on a gamma-radiation imager. In this paper we will present the new generation of gamma camera, called GAMPIX. This system is based on the Timepix chip, hybridized with a CdTe substrate. A coded mask could be used in order to increase the sensitivity of the camera. Moreover, due to themore » USB connection with a standard computer, this gamma camera is immediately operational and user-friendly. The final system is a very compact gamma camera (global weight is less than 1 kg without any shielding) which could be used as a hand-held device for radioprotection purposes. In this article, we present the main characteristics of this new generation of gamma camera and we expose experimental results obtained during in situ measurements. Even though we present preliminary results the final product is under industrialization phase to address various applications specifications. (authors)« less

DCT based interpolation filter for motion compensation in HEVC

NASA Astrophysics Data System (ADS)

Alshin, Alexander; Alshina, Elena; Park, Jeong Hoon; Han, Woo-Jin

2012-10-01

High Efficiency Video Coding (HEVC) draft standard has a challenging goal to improve coding efficiency twice compare to H.264/AVC. Many aspects of the traditional hybrid coding framework were improved during new standard development. Motion compensated prediction, in particular the interpolation filter, is one area that was improved significantly over H.264/AVC. This paper presents the details of the interpolation filter design of the draft HEVC standard. The coding efficiency improvements over H.264/AVC interpolation filter is studied and experimental results are presented, which show a 4.0% average bitrate reduction for Luma component and 11.3% average bitrate reduction for Chroma component. The coding efficiency gains are significant for some video sequences and can reach up 21.7%.

New double-byte error-correcting codes for memory systems

NASA Technical Reports Server (NTRS)

Feng, Gui-Liang; Wu, Xinen; Rao, T. R. N.

1996-01-01

Error-correcting or error-detecting codes have been used in the computer industry to increase reliability, reduce service costs, and maintain data integrity. The single-byte error-correcting and double-byte error-detecting (SbEC-DbED) codes have been successfully used in computer memory subsystems. There are many methods to construct double-byte error-correcting (DBEC) codes. In the present paper we construct a class of double-byte error-correcting codes, which are more efficient than those known to be optimum, and a decoding procedure for our codes is also considered.

Ice Load Project Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCoy, Timothy J.; Brown, Thomas; Byrne, Alex

As interest and investment in offshore wind projects increase worldwide, some turbines will be installed in locations where ice of significant thickness forms on the water surface. This ice moves under the driving forces of wind, current, and thermal effects and may result in substantial forces on bottom-fixed support structures. The North and Baltic Seas in Europe have begun to see significant wind energy development and the Great Lakes of the United States and Canada may host wind energy development in the near future. Design of the support structures for these projects is best performed through the use of anmore » integrated tool that can calculate the cumulative effects of forces due to turbine operations, wind, waves, and floating ice. The dynamic nature of ice forces requires that these forces be included in the design simulations, rather than added as static forces to simulation results. The International Electrotechnical Commission (IEC) standard[2] for offshore wind turbine design and the International Organization for Standardization (ISO) standard[3] for offshore structures provide requirements and algorithms for the calculation of forces induced by surface ice; however, currently none of the major wind turbine dynamic simulation codes provides the ability to model ice loads. The scope of work of the project described in this report includes the development of a suite of subroutines, collectively named IceFloe, that meet the requirements of the IEC and ISO standards and couples with four of the major wind turbine dynamic simulation codes. The mechanisms by which ice forces impinge on offshore structures generally include the forces required for crushing of the ice against vertical-sided structures and the forces required to fracture the ice as it rides up on conical-sided structures. Within these two broad categories, the dynamic character of the forces with respect to time is also dependent on other factors such as the velocity and thickness of the moving ice and the response of the structure. In some cases, the dynamic effects are random and in other cases they are deterministic, such as the effect of structural resonance and coupling of the ice forces with the defection of the support structure. The initial versions of the IceFloe routines incorporate modules that address these varied force and dynamic phenomena with seven alternative algorithms that can be specified by the user. The IceFloe routines have been linked and tested with four major wind turbine aeroelastic simulation codes: FAST, a tool developed under the management of the National Renewable Energy Laboratory (NREL) and available free of charge from its web site; Bladed[4], a widely-used commercial package available from DNV GL; ADAMS[5], a general purpose multi-body simulation code used in the wind industry and available from MSC Software; and HAWC2[6], a code developed by and available for purchase from Danmarks Tekniske Universitet (DTU). Interface routines have been developed and tested with full wind turbine simulations for each of these codes and the source code and example inputs and outputs are available from the NREL website.« less

Industrial Demand Module - NEMS Documentation

EIA Publications

2014-01-01

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

48 CFR 1819.1005 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-10-01

... System (NAICS) codes are: NAICS code Industry category 334111 Electronic Computer Manufacturing. 334418... Manufacturing. 334119 Other Computer Peripheral Equipment Manufacturing. 33422 Radio and Television Broadcasting and Wireless Communication Equipment Manufacturing. 336415 Guided Missile and Space Vehicle Propulsion...

48 CFR 1819.1005 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-10-01

... System (NAICS) codes are: NAICS code Industry category 334111 Electronic Computer Manufacturing. 334418... Manufacturing. 334119 Other Computer Peripheral Equipment Manufacturing. 33422 Radio and Television Broadcasting and Wireless Communication Equipment Manufacturing. 336415 Guided Missile and Space Vehicle Propulsion...

48 CFR 1819.1005 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-10-01

... System (NAICS) codes are: NAICS code Industry category 334111 Electronic Computer Manufacturing. 334418... Manufacturing. 334119 Other Computer Peripheral Equipment Manufacturing. 33422 Radio and Television Broadcasting and Wireless Communication Equipment Manufacturing. 336415 Guided Missile and Space Vehicle Propulsion...

General RMP Guidance - Appendix B: Selected NAICS Codes

EPA Pesticide Factsheets

This appendix contains a list of selected 2002 North American Industry Classification System (NAICS) codes used by Federal statistical agencies, in designating business types or functions in categories such as farming, manufacturing, and waste management.

QR codes: next level of social media.

PubMed

Gottesman, Wesley; Baum, Neil

2013-01-01

The OR code, which is short for quick response code, system was invented in Japan for the auto industry. Its purpose was to track vehicles during manufacture; it was designed to allow high-speed component scanning. Now the scanning can be easily accomplished via cell phone, making the technology useful and within reach of your patients. There are numerous applications for OR codes in the contemporary medical practice. This article describes QR codes and how they might be applied for marketing and practice management.

A Crosswalk of Mineral Commodity End Uses and North American Industry Classification System (NAICS) codes

USGS Publications Warehouse

Barry, James J.; Matos, Grecia R.; Menzie, W. David

2015-09-14

The links between the end uses of mineral commodities and the NAICS codes provide an instrument for analyzing the use of mineral commodities in the economy. The crosswalk is also a guide, highlighting those industrial sectors in the economy that rely heavily on mineral commodities. The distribution of mineral commodities across the economy is dynamic and does differ from year to year. This report reflects a snapshot of the state of the economy and mineral commodities in 2010.

An Analysis of Serial Number Tracking Automatic Identification Technology as Used in Naval Aviation Programs

DTIC Science & Technology

2002-09-01

employed by the supermarket industry in 1973. Other common linear bar code symbologies are Code 39, pioneered by the defense and automotive industries...Teller Machine ( ATM ) cards are one of the prominent uses of this technology, but to a lesser extent, the technology has been used for shop floor...additional power is transmitted to it through the probe, extending its charge. There is a risk of data loss if the CMB is not accessed from time to time

IEEE International Symposium on Information Theory (ISIT): Abstracts of Papers, Held in Ann Arbor, Michigan on 6-9 October 1986.

DTIC Science & Technology

1986-10-01

BUZO, and FEDERICO KUHLMANN, Universidad Nacional Autdnoma de Mixico, Facultad de Ingenieria , Divisidn Estudios de Posgrado, P.O. Box 70-256, 04510...unsuccess- ful in this area for a long time. It was felt, e.g., in the voiceband modem industry , that the coding gains achievable by error-correction coding...without bandwidth expansion or data rate reduction, when compared to uncoded modulation. The concept was quickly adopted by industry , and is now becoming

A Framework for Comprehensive Health Terminology Systems in the United States

PubMed Central

Chute, Christopher G.; Cohn, Simon P.; Campbell, James R.

1998-01-01

Health care in the United States has become an information-intensive industry, yet electronic health records represent patient data inconsistently for lack of clinical data standards. Classifications that have achieved common acceptance, such as the ICD-9-CM or ICD, aggregate heterogeneous patients into broad categories, which preclude their practical use in decision support, development of refined guidelines, or detailed comparison of patient outcomes or benchmarks. This document proposes a framework for the integration and maturation of clinical terminologies that would have practical applications in patient care, process management, outcome analysis, and decision support. Arising from the two working groups within the standards community—the ANSI (American National Standards Institute) Healthcare Informatics Standards Board Working Group and the Computer-based Patient Records Institute Working Group on Codes and Structures—it outlines policies regarding 1) functional characteristics of practical terminologies, 2) terminology models that can broaden their applications and contribute to their sustainability, 3) maintenance attributes that will enable terminologies to keep pace with rapidly changing health care knowledge and process, and 4) administrative issues that would facilitate their accessibility, adoption, and application to improve the quality and efficiency of American health care. PMID:9824798

ISBT 128 Standard for Coding Medical Products of Human Origin

PubMed Central

Ashford, Paul; Delgado, Matthew

2017-01-01

Background ISBT 128 is an international standard for the terminology, coding, labeling, and identification of medical products of human origin (MPHO). Full implementation of ISBT 128 improves traceability, transparency, vigilance and surveillance, and interoperability. Methods ICCBBA maintains the ISBT 128 standard through the activities of a network of expert volunteers, including representatives from professional scientific societies, governments and users, to standardize and maintain MPHO identification. These individuals are organized into Technical Advisory Groups and work within a structured framework as part of a quality-controlled standards development process. Results The extensive involvement of international scientific and professional societies in the development of the standard has ensured that ISBT 128 has gained widespread recognition. The user community has developed confidence in the ability of the standard to adapt to new developments in their fields of interest. The standard is fully compatible with Single European Code requirements for tissues and cells and is utilized by many European tissue establishments. ISBT 128's flexibility and robustness has allowed for expansions into subject areas such as cellular therapy, regenerative medicine, and tissue banking. Conclusion ISBT 128 is the internationally recognized standard for coding MPHO and has gained widespread use globally throughout the past two decades. PMID:29344013

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

10 CFR 50.55a - Codes and standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., standard design approval, and standard design certification application under part 52 of this chapter is... section. (a)(1) Structures, systems, and components must be designed, fabricated, erected, constructed... Guide 1.84, Revision 34, “Design, Fabrication, and Materials Code Case Acceptability, ASME Section III...

Standardized Definitions for Code Verification Test Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doebling, Scott William

This document contains standardized definitions for several commonly used code verification test problems. These definitions are intended to contain sufficient information to set up the test problem in a computational physics code. These definitions are intended to be used in conjunction with exact solutions to these problems generated using Exact- Pack, www.github.com/lanl/exactpack.

Building codes : obstacle or opportunity?

Treesearch

Alberto Goetzl; David B. McKeever

1999-01-01

Building codes are critically important in the use of wood products for construction. The codes contain regulations that are prescriptive or performance related for various kinds of buildings and construction types. A prescriptive standard might dictate that a particular type of material be used in a given application. A performance standard requires that a particular...

A new method for evaluating compliance with industry self-regulation codes governing the content of alcohol advertising.

PubMed

Babor, Thomas F; Xuan, Ziming; Damon, Donna

2013-10-01

This study evaluated the use of a modified Delphi technique in combination with a previously developed alcohol advertising rating procedure to detect content violations in the U.S. Beer Institute Code. A related aim was to estimate the minimum number of raters needed to obtain reliable evaluations of code violations in television commercials. Six alcohol ads selected for their likelihood of having code violations were rated by community and expert participants (N = 286). Quantitative rating scales were used to measure the content of alcohol advertisements based on alcohol industry self-regulatory guidelines. The community group participants represented vulnerability characteristics that industry codes were designed to protect (e.g., age <21); experts represented various health-related professions, including public health, human development, alcohol research, and mental health. Alcohol ads were rated on 2 occasions separated by 1 month. After completing Time 1 ratings, participants were randomized to receive feedback from 1 group or the other. Findings indicate that (i) ratings at Time 2 had generally reduced variance, suggesting greater consensus after feedback, (ii) feedback from the expert group was more influential than that of the community group in developing group consensus, (iii) the expert group found significantly fewer violations than the community group, (iv) experts representing different professional backgrounds did not differ among themselves in the number of violations identified, and (v) a rating panel composed of at least 15 raters is sufficient to obtain reliable estimates of code violations. The Delphi technique facilitates consensus development around code violations in alcohol ad content and may enhance the ability of regulatory agencies to monitor the content of alcoholic beverage advertising when combined with psychometric-based rating procedures. Copyright © 2013 by the Research Society on Alcoholism.

A New Method for Evaluating Compliance with Industry Self-regulation Codes Governing the Content of Alcohol Advertising

PubMed Central

Babor, Thomas F.; Xuan, Ziming; Damon, Donna

2013-01-01

Background This study evaluated the use of a modified Delphi technique in combination with a previously developed alcohol advertising rating procedure to detect content violations in the US Beer Institute code. A related aim was to estimate the minimum number of raters needed to obtain reliable evaluations of code violations in television commercials. Methods Six alcohol ads selected for their likelihood of having code violations were rated by community and expert participants (N=286). Quantitative rating scales were used to measure the content of alcohol advertisements based on alcohol industry self-regulatory guidelines. The community group participants represented vulnerability characteristics that industry codes were designed to protect (e.g., age < 21); experts represented various health-related professions, including public health, human development, alcohol research and mental health. Alcohol ads were rated on two occasions separated by one month. After completing Time 1 ratings, participants were randomized to receive feedback from one group or the other. Results Findings indicate that (1) ratings at Time 2 had generally reduced variance, suggesting greater consensus after feedback, (2) feedback from the expert group was more influential than that of the community group in developing group consensus, (3) the expert group found significantly fewer violations than the community group, (4) experts representing different professional backgrounds did not differ among themselves in the number of violations identified; (5) a rating panel composed of at least 15 raters is sufficient to obtain reliable estimates of code violations. Conclusions The Delphi Technique facilitates consensus development around code violations in alcohol ad content and may enhance the ability of regulatory agencies to monitor the content of alcoholic beverage advertising when combined with psychometric-based rating procedures. PMID:23682927

Associations Between Thematic Content and Industry Self-Regulation Code Violations in Beer Advertising Broadcast During the U.S. NCAA Basketball Tournament.

PubMed

Noel, Jonathan K; Xuan, Ziming; Babor, Thomas F

2017-07-03

Beer marketing in the United States is controlled through self-regulation, whereby the beer industry has created a marketing code and enforces its use. We performed a thematic content analysis on beer ads broadcast during a U.S. college athletic event and determined which themes are associated with violations of a self-regulated alcohol marketing code. 289 beer ads broadcast during the U.S. NCAA Men's and Women's 1999-2008 basketball tournaments were assessed for the presence of 23 thematic content areas. Associations between themes and violations of the U.S. Beer Institute's Marketing and Advertising Code were determined using generalized linear models. Humor (61.3%), taste (61.0%), masculinity (49.2%), and enjoyment (36.5%) were the most prevalent content areas. Nine content areas (i.e., conformity, ethnicity, sensation seeking, sociability, romance, special occasions, text responsibility messages, tradition, and individuality) were positively associated with code violations (p < 0.001-0.042). There were significantly more content areas positively associated with code violations than content areas negatively associated with code violations (p < 0.001). Several thematic content areas were positively associated with code violations. The results can inform existing efforts to revise self-regulated alcohol marketing codes to ensure better protection of vulnerable populations. The use of several themes is concerning in relation to adolescent alcohol use and health disparities.

75 FR 8169 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-23

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of Proposed Rule Change To Amend the Codes of Arbitration Procedure To Provide for Attorney Representation of Non-Party... Financial Industry Regulatory Authority, Inc. (``FINRA'') (f/k/a National Association of Securities Dealers...

The future of the OSHA PSM standard.

PubMed

Kaelin, David E

2014-07-01

The significance of the proposed PSM changes could be to greatly expand coverage of processes in order to include many not currently covered by the PSM regulation. New chemicals will likely be added to Appendix A, and reactive chemicals (a definition will be needed) also may be covered. What exactly will be the definition of a reactive chemical is unclear at this time, although definitions used in New Jersey in the TCPA Act may guide OSHA. It is likely that atmospheric storage of flammable liquids will be included more specifically and the exemption of these tanks eliminated. In applying RAGAGEP, sites may be required to apply the most recent codes and standards to covered processes, perhaps at the time of PHA auditing: A narrowing of the PSM exemption for retail facilities could bring many of them under the PSM regulation at some level. Process safety management practices should be applied to all facilities that store and process hazardous materials that have fire, explosion, reactivity, and toxic properties. If changes are made to the PSM regulation, many new sites will be covered and will need to formally adopt PSM as defined in the OSHA regulation. The addition of reactive chemicals to the PSM regulation will greatly expand the number of processes covered by the regulation. Keeping up with the most current codes, standards, and legislative changes is a daunting task that may require the support of specialists. The results of the proposed legislation will be an increase in the level of process safety excellence throughout the chemical industries.

Turbulence modeling needs of commercial CFD codes: Complex flows in the aerospace and automotive industries

NASA Technical Reports Server (NTRS)

Befrui, Bizhan A.

1995-01-01

This viewgraph presentation discusses the following: STAR-CD computational features; STAR-CD turbulence models; common features of industrial complex flows; industry-specific CFD development requirements; applications and experiences of industrial complex flows, including flow in rotating disc cavities, diffusion hole film cooling, internal blade cooling, and external car aerodynamics; and conclusions on turbulence modeling needs.

Subjective evaluation of next-generation video compression algorithms: a case study

NASA Astrophysics Data System (ADS)

De Simone, Francesca; Goldmann, Lutz; Lee, Jong-Seok; Ebrahimi, Touradj; Baroncini, Vittorio

2010-08-01

This paper describes the details and the results of the subjective quality evaluation performed at EPFL, as a contribution to the effort of the Joint Collaborative Team on Video Coding (JCT-VC) for the definition of the next-generation video coding standard. The performance of 27 coding technologies have been evaluated with respect to two H.264/MPEG-4 AVC anchors, considering high definition (HD) test material. The test campaign involved a total of 494 naive observers and took place over a period of four weeks. While similar tests have been conducted as part of the standardization process of previous video coding technologies, the test campaign described in this paper is by far the most extensive in the history of video coding standardization. The obtained subjective quality scores show high consistency and support an accurate comparison of the performance of the different coding solutions.

Extensions under development for the HEVC standard

NASA Astrophysics Data System (ADS)

Sullivan, Gary J.

2013-09-01

This paper discusses standardization activities for extending the capabilities of the High Efficiency Video Coding (HEVC) standard - the first edition of which was completed in early 2013. These near-term extensions are focused on three areas: range extensions (such as enhanced chroma formats, monochrome video, and increased bit depth), bitstream scalability extensions for spatial and fidelity scalability, and 3D video extensions (including stereoscopic/multi-view coding, and probably also depth map coding and combinations thereof). Standardization extensions on each of these topics will be completed by mid-2014, and further work beyond that timeframe is also discussed.

[Comparative analysis on industrial standardization degree of Chinese and Korean ginseng].

PubMed

Chu, Qiao; Xi, Xing-Jun; Wang, He-Yan; Si, Ding-Hua; Tang, Fei; Lan, Tao

2017-05-01

Panax ginseng is a well-known medicinal plant all over the world. It has high nutritional value and medicinal value. China and South Korea are the major countries in the world for ginseng cultivation, production and exportation. China's ginseng production accounts for more than half of the world, but the output value is less than that of Korea. The standardization process of ginseng industry plays an important role. This paper makes a detailed analysis of the Chinese and Korean ginseng national standards and the standardization process, and makes a detailed comparative analysis of the categories, standard contents, index selection, age, implementation and promotion status of the Chinese and Korean ginseng standards. The development disadvantages of ginseng industry standardization were displayed. And we give our advises on the standard revision, implementation of China's ginseng industry standardization, hoping to enhance the competitiveness of China's ginseng industry. Copyright© by the Chinese Pharmaceutical Association.

Programming (Tips) for Physicists & Engineers

ScienceCinema

Ozcan, Erkcan

2018-02-19

Programming for today's physicists and engineers. Work environment: today's astroparticle, accelerator experiments and information industry rely on large collaborations. Need more than ever: code sharing/resuse, code building--framework integration, documentation and good visualization, working remotely, not reinventing the wheel.

Programming (Tips) for Physicists & Engineers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ozcan, Erkcan

2010-07-13

Programming for today's physicists and engineers. Work environment: today's astroparticle, accelerator experiments and information industry rely on large collaborations. Need more than ever: code sharing/resuse, code building--framework integration, documentation and good visualization, working remotely, not reinventing the wheel.

76 FR 70680 - Small Business Size Standards: Real Estate and Rental and Leasing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-15

... industries and one sub- industry in North American Industry Classification System (NAICS) Sector 53, Real... industries grouped by NAICS Sector. SBA issued a White Paper entitled ``Size Standards Methodology'' and published in the October 21, 2009 issue of the Federal Register. That ``Size Standards Methodology'' is...

78 FR 42821 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Affairs Acquisition Regulation (VAAR) Provision 852.211-72 (formerly 852.211-75), Technical Industry.... Abstract: VAAR provision 852.211-72, Technical Industry Standards, requires items offered for sale to VA...

Software Certification for Temporal Properties With Affordable Tool Qualification

NASA Technical Reports Server (NTRS)

Xia, Songtao; DiVito, Benedetto L.

2005-01-01

It has been recognized that a framework based on proof-carrying code (also called semantic-based software certification in its community) could be used as a candidate software certification process for the avionics industry. To meet this goal, tools in the "trust base" of a proof-carrying code system must be qualified by regulatory authorities. A family of semantic-based software certification approaches is described, each different in expressive power, level of automation and trust base. Of particular interest is the so-called abstraction-carrying code, which can certify temporal properties. When a pure abstraction-carrying code method is used in the context of industrial software certification, the fact that the trust base includes a model checker would incur a high qualification cost. This position paper proposes a hybrid of abstraction-based and proof-based certification methods so that the model checker used by a client can be significantly simplified, thereby leading to lower cost in tool qualification.

C++ Coding Standards for the AMP Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, Thomas M; Clarno, Kevin T

2009-09-01

This document provides an initial starting point to define the C++ coding standards used by the AMP nuclear fuel performance integrated code project and a part of AMP's software development process. This document draws from the experiences, and documentation [1], of the developers of the Marmot Project at Los Alamos National Laboratory. Much of the software in AMP will be written in C++. The power of C++ can be abused easily, resulting in code that is difficult to understand and maintain. This document gives the practices that should be followed on the AMP project for all new code that ismore » written. The intent is not to be onerous but to ensure that the code can be readily understood by the entire code team and serve as a basis for collectively defining a set of coding standards for use in future development efforts. At the end of the AMP development in fiscal year (FY) 2010, all developers will have experience with the benefits, restrictions, and limitations of the standards described and will collectively define a set of standards for future software development. External libraries that AMP uses do not have to meet these requirements, although we encourage external developers to follow these practices. For any code of which AMP takes ownership, the project will decide on any changes on a case-by-case basis. The practices that we are using in the AMP project have been in use in the Denovo project [2] for several years. The practices build on those given in References [3-5]; the practices given in these references should also be followed. Some of the practices given in this document can also be found in [6].« less

Final Technical Report for GO17004 Regulatory Logic: Codes and Standards for the Hydrogen Economy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakarado, Gary L.

The objectives of this project are to: develop a robust supporting research and development program to provide critical hydrogen behavior data and a detailed understanding of hydrogen combustion and safety across a range of scenarios, needed to establish setback distances in building codes and minimize the overall data gaps in code development; support and facilitate the completion of technical specifications by the International Organization for Standardization (ISO) for gaseous hydrogen refueling (TS 20012) and standards for on-board liquid (ISO 13985) and gaseous or gaseous blend (ISO 15869) hydrogen storage by 2007; support and facilitate the effort, led by the NFPA,more » to complete the draft Hydrogen Technologies Code (NFPA 2) by 2008; with experimental data and input from Technology Validation Program element activities, support and facilitate the completion of standards for bulk hydrogen storage (e.g., NFPA 55) by 2008; facilitate the adoption of the most recently available model codes (e.g., from the International Code Council [ICC]) in key regions; complete preliminary research and development on hydrogen release scenarios to support the establishment of setback distances in building codes and provide a sound basis for model code development and adoption; support and facilitate the development of Global Technical Regulations (GTRs) by 2010 for hydrogen vehicle systems under the United Nations Economic Commission for Europe, World Forum for Harmonization of Vehicle Regulations and Working Party on Pollution and Energy Program (ECE-WP29/GRPE); and to Support and facilitate the completion by 2012 of necessary codes and standards needed for the early commercialization and market entry of hydrogen energy technologies.« less

Report number codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.N.

This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in thismore » publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name.« less

Emerging from the tragedies in Bangladesh: a challenge to voluntarism in the global economy.

PubMed

Claeson, Björn Skorpen

2015-02-01

Under the regime of private company or multi-stakeholder voluntary codes of conduct and industry social auditing, workers have absorbed low wages and unsafe and abusive conditions; labor leaders and union members have become the targets of both government and factory harassment and violence; and trade union power has waned. Nowhere have these private systems of codes and audits so clearly failed to protect workers as in Bangladesh's apparel industry. However, international labor groups and Bangladeshi unions have succeeded in mounting a challenge to voluntarism in the global economy, persuading more than 180 companies to make a binding and enforceable commitment to workers' safety in an agreement with 12 unions. The extent to which this Bangladesh Accord will be able to influence the entrenched global regime of voluntary codes and weak trade unions remains an open question. But if the Accord can make progress in Bangladesh, it can help to inspire similar efforts in other countries and in other industries. © 2015 SAGE Publications.

Messages in alcohol advertising targeted to youth.

PubMed

Jones, S C; Donovan, R J

2001-04-01

To assess young people's perceived messages in three ads for a vodka-based, pre-mixed alcohol beverage, and to assess the extent to which the ads appeared to be consistent with the industry's voluntary code. Members of two convenience samples of young people (15-16 and 19-21 years) were each exposed to one of three advertisements. Respondents completed a post exposure questionnaire based on standard advertising copy testing procedures. The most frequently nominated open-ended responses to 'the main message(s) of the ad' related to the product delivering mood effects: both removal of negative emotions (e.g. 'stress reduction'), as well as inducing positive states such as feeling 'carefree' and gaining 'increased enjoyment'. Consumption of the product was perceived to offer 'self-confidence', 'sexual/relationship success' and 'social success'. Fewer respondents nominated tangible product characteristics, the main one being 'easy to drink'. One in four of the 15-16 year olds saw the ads as aimed at 'people my age', while almost half of the 19-21 year olds saw the ads as aimed at 'people younger or much younger than me'. These results appear to contravene the Alcoholic Beverages Advertising Code (ABAC) by suggesting that the consumption of alcohol beverages: (i) contributes to social and sexual success; and (ii) contributes to a significant change in mood (stress reduction/relaxation). Incidental observation of alcohol ads suggests that contravention of the code is more widespread than the number of alcohol advertising complaints would indicate. All 11 such complaints lodged with the Advertising Standards Board between May 1998 and April 1999 were dismissed. Evidence such as that gathered in this study might improve the chances of complaints being upheld.

45 CFR 74.42 - Codes of conduct.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., AND COMMERCIAL ORGANIZATIONS Post-Award Requirements Procurement Standards § 74.42 Codes of conduct... the gift is an unsolicited item of nominal value. The standards of conduct shall provide for...

The human dimensions of energy use in buildings: A review

DOE Office of Scientific and Technical Information (OSTI.GOV)

D'Oca, Simona; Hong, Tianzhen; Langevin, Jared

The “human dimensions” of energy use in buildings refer to the energy-related behaviors of key stakeholders that affect energy use over the building life cycle. Stakeholders include building designers, operators, managers, engineers, occupants, industry, vendors, and policymakers, who directly or indirectly influence the acts of designing, constructing, living, operating, managing, and regulating the built environments, from individual building up to the urban scale. Among factors driving high-performance buildings, human dimensions play a role that is as significant as that of technological advances. However, this factor is not well understood, and, as a result, human dimensions are often ignored or simplifiedmore » by stakeholders. This work presents a review of the literature on human dimensions of building energy use to assess the state-of-the-art in this topic area. The paper highlights research needs for fully integrating human dimensions into the building design and operation processes with the goal of reducing energy use in buildings while enhancing occupant comfort and productivity. This research focuses on identifying key needs for each stakeholder involved in a building's life cycle and takes an interdisciplinary focus that spans the fields of architecture and engineering design, sociology, data science, energy policy, codes, and standards to provide targeted insights. Greater understanding of the human dimensions of energy use has several potential benefits including reductions in operating cost for building owners; enhanced comfort conditions and productivity for building occupants; more effective building energy management and automation systems for building operators and energy managers; and the integration of more accurate control logic into the next generation of human-in-the-loop technologies. The review concludes by summarizing recommendations for policy makers and industry stakeholders for developing codes, standards, and technologies that can leverage the human dimensions of energy use to reliably predict and achieve energy use reductions in the residential and commercial buildings sectors.« less

The human dimensions of energy use in buildings: A review

DOE PAGES

D'Oca, Simona; Hong, Tianzhen; Langevin, Jared

2017-08-19

The “human dimensions” of energy use in buildings refer to the energy-related behaviors of key stakeholders that affect energy use over the building life cycle. Stakeholders include building designers, operators, managers, engineers, occupants, industry, vendors, and policymakers, who directly or indirectly influence the acts of designing, constructing, living, operating, managing, and regulating the built environments, from individual building up to the urban scale. Among factors driving high-performance buildings, human dimensions play a role that is as significant as that of technological advances. However, this factor is not well understood, and, as a result, human dimensions are often ignored or simplifiedmore » by stakeholders. This work presents a review of the literature on human dimensions of building energy use to assess the state-of-the-art in this topic area. The paper highlights research needs for fully integrating human dimensions into the building design and operation processes with the goal of reducing energy use in buildings while enhancing occupant comfort and productivity. This research focuses on identifying key needs for each stakeholder involved in a building's life cycle and takes an interdisciplinary focus that spans the fields of architecture and engineering design, sociology, data science, energy policy, codes, and standards to provide targeted insights. Greater understanding of the human dimensions of energy use has several potential benefits including reductions in operating cost for building owners; enhanced comfort conditions and productivity for building occupants; more effective building energy management and automation systems for building operators and energy managers; and the integration of more accurate control logic into the next generation of human-in-the-loop technologies. The review concludes by summarizing recommendations for policy makers and industry stakeholders for developing codes, standards, and technologies that can leverage the human dimensions of energy use to reliably predict and achieve energy use reductions in the residential and commercial buildings sectors.« less

Development and evaluation of a Naïve Bayesian model for coding causation of workers’ compensation claims☆

PubMed Central

Bertke, S. J.; Meyers, A. R.; Wurzelbacher, S. J.; Bell, J.; Lampl, M. L.; Robins, D.

2015-01-01

Introduction Tracking and trending rates of injuries and illnesses classified as musculoskeletal disorders caused by ergonomic risk factors such as overexertion and repetitive motion (MSDs) and slips, trips, or falls (STFs) in different industry sectors is of high interest to many researchers. Unfortunately, identifying the cause of injuries and illnesses in large datasets such as workers’ compensation systems often requires reading and coding the free form accident text narrative for potentially millions of records. Method To alleviate the need for manual coding, this paper describes and evaluates a computer auto-coding algorithm that demonstrated the ability to code millions of claims quickly and accurately by learning from a set of previously manually coded claims. Conclusions The auto-coding program was able to code claims as a musculoskeletal disorders, STF or other with approximately 90% accuracy. Impact on industry The program developed and discussed in this paper provides an accurate and efficient method for identifying the causation of workers’ compensation claims as a STF or MSD in a large database based on the unstructured text narrative and resulting injury diagnoses. The program coded thousands of claims in minutes. The method described in this paper can be used by researchers and practitioners to relieve the manual burden of reading and identifying the causation of claims as a STF or MSD. Furthermore, the method can be easily generalized to code/classify other unstructured text narratives. PMID:23206504

PHASE I MATERIALS PROPERTY DATABASE DEVELOPMENT FOR ASME CODES AND STANDARDS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju; Lin, Lianshan

2013-01-01

To support the ASME Boiler and Pressure Vessel Codes and Standard (BPVC) in modern information era, development of a web-based materials property database is initiated under the supervision of ASME Committee on Materials. To achieve efficiency, the project heavily draws upon experience from development of the Gen IV Materials Handbook and the Nuclear System Materials Handbook. The effort is divided into two phases. Phase I is planned to deliver a materials data file warehouse that offers a depository for various files containing raw data and background information, and Phase II will provide a relational digital database that provides advanced featuresmore » facilitating digital data processing and management. Population of the database will start with materials property data for nuclear applications and expand to data covering the entire ASME Code and Standards including the piping codes as the database structure is continuously optimized. The ultimate goal of the effort is to establish a sound cyber infrastructure that support ASME Codes and Standards development and maintenance.« less

OVERFLOW-Interaction with Industry

NASA Technical Reports Server (NTRS)

Buning, Pieter G.; George, Michael W. (Technical Monitor)

1996-01-01

A Navier-Stokes flow solver, OVERFLOW, has been developed by researchers at NASA Ames Research Center to use overset (Chimera) grids to simulate the flow about complex aerodynamic shapes. Primary customers of the OVERFLOW flow solver and related software include McDonnell Douglas and Boeing, as well as the NASA Focused Programs for Advanced Subsonic Technology (AST) and High Speed Research (HSR). Code development has focused on customer issues, including improving code performance, ability to run on workstation clusters and the NAS SP2, and direct interaction with industry on accuracy assessment and validation. Significant interaction with NAS has produced a capability tailored to the Ames computing environment, and code contributions have come from a wide range of sources, both within and outside Ames.

Report on the Project for Establishment of the Standardized Korean Laboratory Terminology Database, 2015.

PubMed

Jung, Bo Kyeung; Kim, Jeeyong; Cho, Chi Hyun; Kim, Ju Yeon; Nam, Myung Hyun; Shin, Bong Kyung; Rho, Eun Youn; Kim, Sollip; Sung, Heungsup; Kim, Shinyoung; Ki, Chang Seok; Park, Min Jung; Lee, Kap No; Yoon, Soo Young

2017-04-01

The National Health Information Standards Committee was established in 2004 in Korea. The practical subcommittee for laboratory test terminology was placed in charge of standardizing laboratory medicine terminology in Korean. We aimed to establish a standardized Korean laboratory terminology database, Korea-Logical Observation Identifier Names and Codes (K-LOINC) based on former products sponsored by this committee. The primary product was revised based on the opinions of specialists. Next, we mapped the electronic data interchange (EDI) codes that were revised in 2014, to the corresponding K-LOINC. We established a database of synonyms, including the laboratory codes of three reference laboratories and four tertiary hospitals in Korea. Furthermore, we supplemented the clinical microbiology section of K-LOINC using an alternative mapping strategy. We investigated other systems that utilize laboratory codes in order to investigate the compatibility of K-LOINC with statistical standards for a number of tests. A total of 48,990 laboratory codes were adopted (21,539 new and 16,330 revised). All of the LOINC synonyms were translated into Korean, and 39,347 Korean synonyms were added. Moreover, 21,773 synonyms were added from reference laboratories and tertiary hospitals. Alternative strategies were established for mapping within the microbiology domain. When we applied these to a smaller hospital, the mapping rate was successfully increased. Finally, we confirmed K-LOINC compatibility with other statistical standards, including a newly proposed EDI code system. This project successfully established an up-to-date standardized Korean laboratory terminology database, as well as an updated EDI mapping to facilitate the introduction of standard terminology into institutions. © 2017 The Korean Academy of Medical Sciences.

Status of Metric Conversion A Survey of U.S. Standards Writing Organizations.

DTIC Science & Technology

1982-05-01

Boiler and Pressure Vessel Code . 7...to and consistent with metrication of the ASME Boiler and Pressure Vessel Code . The Electrical Apparatus Service Association is a trade asso- ciation...metrication of TEMA Standards will be compatible to and consistent with metrication of the ASME Boiler and Pressure Vessel Code . TEMA’s metrication

Telemetry advances in data compression and channel coding

NASA Technical Reports Server (NTRS)

Miller, Warner H.; Morakis, James C.; Yeh, Pen-Shu

1990-01-01

Addressed in this paper is the dependence of telecommunication channel, forward error correcting coding and source data compression coding on integrated circuit technology. Emphasis is placed on real time high speed Reed Solomon (RS) decoding using full custom VLSI technology. Performance curves of NASA's standard channel coder and a proposed standard lossless data compression coder are presented.

Strategic Industry Attack.

DTIC Science & Technology

1980-01-15

Code B364078464 V99QAXNH30303 H2590D. IS KEY WORDS fCo.. e.1 Odn Od It -C.eWV WHO Idnlif b 61-k n 0ber) Strategic Targeting Copper Industry INDATAK 20...develop, debug and test an industrial simulation model (INDATAK) using the LOGATAK model as a point of departure. The copper processing industry is...significant processes in the copper industry, including the transportation network connecting the processing elements, have been formatted for use in

49 CFR Appendix C to Part 229 - FRA Locomotive Standards-Code of Defects

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false FRA Locomotive Standards-Code of Defects C Appendix C to Part 229 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Pt. 229, App. C...

49 CFR Appendix C to Part 229 - FRA Locomotive Standards-Code of Defects

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false FRA Locomotive Standards-Code of Defects C Appendix C to Part 229 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Pt. 229, App. C...

49 CFR Appendix C to Part 229 - FRA Locomotive Standards-Code of Defects

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false FRA Locomotive Standards-Code of Defects C Appendix C to Part 229 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Pt. 229, App. C...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2013 CFR

2013-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2013-10-01 2013-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2014 CFR

2014-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2014-10-01 2014-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2012 CFR

2012-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2012-10-01 2012-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2011 CFR

2011-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2011-10-01 2011-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...