44 CFR 206.400 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

26 CFR 1.42-5 - Monitoring compliance with low-income housing credit requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... be required to retain the original local health, safety, or building code violation reports or... account local health, safety, and building codes (or other habitability standards), and the State or local government unit responsible for making local health, safety, or building code inspections did not issue a...

26 CFR 1.42-5 - Monitoring compliance with low-income housing credit requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... be required to retain the original local health, safety, or building code violation reports or... account local health, safety, and building codes (or other habitability standards), and the State or local government unit responsible for making local health, safety, or building code inspections did not issue a...

76 FR 22383 - National Fire Codes: Request for Proposals for Revision of Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-21

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Fire Codes: Request... publishing this notice on behalf of the National Fire Protection Association (NFPA) to announce the NFPA's proposal to revise some of its fire safety codes and standards and requests proposals from the public to...

Safety and health in the construction of fixed offshore installations in the petroleum industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-01-01

A meeting convened by the ILO (International Labor Office) on safety problems in the offshore petroleum industry recommended the preparation of a code of practice setting out standards for safety and health during the construction of fixed offshore installations. Such a code, to be prepared by the ILO in co-operation with other bodies, including the Inter-Governmental Maritime Consultative Organisation (IMCO), was to take into consideration existing standards applicable to offshore construction activities and to supplement the ILO codes of practice on safety and health in building and civil engineering work, shipbuilding and ship repairing. (Copyright (c) International Labour Organisation 1981.)

75 FR 17644 - Update to NFPA 101, Life Safety Code, for State Home Facilities

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 51 RIN 2900-AN59 Update to NFPA 101, Life Safety Code... certain provisions of the 2009 edition of the National Fire Protection Association's NFPA 101, Life Safety... standards regarding life safety and fire safety. DATES: Written comments must be received by VA on or before...

29 CFR 1910.35 - Compliance with NFPA 101-2000, Life Safety Code.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 5 2011-07-01 2011-07-01 false Compliance with NFPA 101-2000, Life Safety Code. 1910.35 Section 1910.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Means of Egress § 1910.35 Compliance...

77 FR 54836 - Federal Motor Vehicle Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards CFR Correction 0 In Title 49 of the Code of Federal Regulations... read as follows: Sec. 571.119 Standard No. 119; New pneumatic tires for motor vehicles with a GVWR of...

29 CFR 1910.35 - Compliance with alternate exit-route codes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 1910.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Exit Routes and Emergency Planning § 1910.35...-route provisions of NFPA 101, Life Safety Code, 2009 edition, or the exit-route provisions of the...

Department of Energy Construction Safety Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-09-01

DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

46 CFR 197.204 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Institute “Code for Pressure Piping, Power Piping.” ASME Code means the American Society of Mechanical Engineers “Boiler and Pressure Vessel Code.” ASME PVHO-1 means the ANSI/ASME standard “Safety Standard for Pressure Vessels for Human Occupancy.” ATA means a measure of pressure expressed in terms of atmosphere...

46 CFR 197.204 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Institute “Code for Pressure Piping, Power Piping.” ASME Code means the American Society of Mechanical Engineers “Boiler and Pressure Vessel Code.” ASME PVHO-1 means the ANSI/ASME standard “Safety Standard for Pressure Vessels for Human Occupancy.” ATA means a measure of pressure expressed in terms of atmosphere...

46 CFR 197.204 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Institute “Code for Pressure Piping, Power Piping.” ASME Code means the American Society of Mechanical Engineers “Boiler and Pressure Vessel Code.” ASME PVHO-1 means the ANSI/ASME standard “Safety Standard for Pressure Vessels for Human Occupancy.” ATA means a measure of pressure expressed in terms of atmosphere...

46 CFR 197.204 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Institute “Code for Pressure Piping, Power Piping.” ASME Code means the American Society of Mechanical Engineers “Boiler and Pressure Vessel Code.” ASME PVHO-1 means the ANSI/ASME standard “Safety Standard for Pressure Vessels for Human Occupancy.” ATA means a measure of pressure expressed in terms of atmosphere...

Inventory of Safety-related Codes and Standards for Energy Storage Systems with some Experiences related to Approval and Acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.

The purpose of this document is to identify laws, rules, model codes, codes, standards, regulations, specifications (CSR) related to safety that could apply to stationary energy storage systems (ESS) and experiences to date securing approval of ESS in relation to CSR. This information is intended to assist in securing approval of ESS under current CSR and to identification of new CRS or revisions to existing CRS and necessary supporting research and documentation that can foster the deployment of safe ESS.

Safety and Liability.

ERIC Educational Resources Information Center

Berthelot, Ronald J.; And Others

1982-01-01

This series of five articles highlights Pensacola Junior College's occupational safety course, involving simulated emergencies, Florida's standards for teacher liability, electrical safety in the classroom and laboratory, color coding for machine safety, and Florida industrial arts safety instructional materials. (SK)

36 CFR 910.37 - Fire and life safety.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Fire and life safety. 910.37... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.37 Fire and life safety. As a... recommended that all new development be guided by standards of the NFPA Codes for fire and life safety and...

36 CFR 910.37 - Fire and life safety.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Fire and life safety. 910.37... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.37 Fire and life safety. As a... recommended that all new development be guided by standards of the NFPA Codes for fire and life safety and...

49 CFR Appendix C to Part 229 - FRA Locomotive Standards-Code of Defects

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false FRA Locomotive Standards-Code of Defects C Appendix C to Part 229 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Pt. 229, App. C...

49 CFR Appendix C to Part 229 - FRA Locomotive Standards-Code of Defects

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false FRA Locomotive Standards-Code of Defects C Appendix C to Part 229 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Pt. 229, App. C...

49 CFR Appendix C to Part 229 - FRA Locomotive Standards-Code of Defects

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false FRA Locomotive Standards-Code of Defects C Appendix C to Part 229 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Pt. 229, App. C...

Common Day Care Safety Renovations: Descriptions, Explanations and Cost Estimates.

ERIC Educational Resources Information Center

Spack, Stan

This booklet explains some of the day care safety features specified by the new Massachusetts State Building Code (January 1, 1975) which must be met before a new day care center can be licensed. The safety features described are those which most often require renovation to meet the building code standards. Best estimates of the costs involved in…

76 FR 70414 - National Fire Protection Association (NFPA) Proposes To Revise Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Fire Protection... publishing this notice on behalf of the National Fire Protection Association (NFPA) to announce the NFPA's proposal to revise some of its fire safety codes and standards and requests proposals from the public to...

78 FR 37505 - International Standard-Setting Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-21

... Code of Practice for Weed Control to Prevent and Reduce Pyrrolizidine Alkaloid Contamination in Food... DEPARTMENT OF AGRICULTURE Food Safety and Inspection Service [Docket No. FSIS-2013-0002] International Standard-Setting Activities AGENCY: Office of Food Safety, USDA. ACTION: Notice. SUMMARY: This...

Overview of the U.S. DOE Hydrogen Safety, Codes and Standards Program. Part 4: Hydrogen Sensors; Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buttner, William J.; Rivkin, Carl; Burgess, Robert

Hydrogen sensors are recognized as a critical element in the safety design for any hydrogen system. In this role, sensors can perform several important functions including indication of unintended hydrogen releases, activation of mitigation strategies to preclude the development of dangerous situations, activation of alarm systems and communication to first responders, and to initiate system shutdown. The functionality of hydrogen sensors in this capacity is decoupled from the system being monitored, thereby providing an independent safety component that is not affected by the system itself. The importance of hydrogen sensors has been recognized by DOE and by the Fuel Cellmore » Technologies Office's Safety and Codes Standards (SCS) program in particular, which has for several years supported hydrogen safety sensor research and development. The SCS hydrogen sensor programs are currently led by the National Renewable Energy Laboratory, Los Alamos National Laboratory, and Lawrence Livermore National Laboratory. The current SCS sensor program encompasses the full range of issues related to safety sensors, including development of advance sensor platforms with exemplary performance, development of sensor-related code and standards, outreach to stakeholders on the role sensors play in facilitating deployment, technology evaluation, and support on the proper selection and use of sensors.« less

7 CFR 3550.10 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., meets or exceeds the requirements of the recognized development standards (model building codes) for... Federally Manufactured Home Construction and Safety Standard and RHS Thermal Performance Standards. It is...

7 CFR 3550.10 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., meets or exceeds the requirements of the recognized development standards (model building codes) for... Federally Manufactured Home Construction and Safety Standard and RHS Thermal Performance Standards. It is...

7 CFR 3550.10 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., meets or exceeds the requirements of the recognized development standards (model building codes) for... Federally Manufactured Home Construction and Safety Standard and RHS Thermal Performance Standards. It is...

Continuous Codes and Standards Improvement (CCSI)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivkin, Carl H; Burgess, Robert M; Buttner, William J

2015-10-21

As of 2014, the majority of the codes and standards required to initially deploy hydrogen technologies infrastructure in the United States have been promulgated. These codes and standards will be field tested through their application to actual hydrogen technologies projects. Continuous codes and standards improvement (CCSI) is a process of identifying code issues that arise during project deployment and then developing codes solutions to these issues. These solutions would typically be proposed amendments to codes and standards. The process is continuous because as technology and the state of safety knowledge develops there will be a need to monitor the applicationmore » of codes and standards and improve them based on information gathered during their application. This paper will discuss code issues that have surfaced through hydrogen technologies infrastructure project deployment and potential code changes that would address these issues. The issues that this paper will address include (1) setback distances for bulk hydrogen storage, (2) code mandated hazard analyses, (3) sensor placement and communication, (4) the use of approved equipment, and (5) system monitoring and maintenance requirements.« less

46 CFR 12.15-3 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... years the minimum standards of competence for the following 4 areas of basic safety: (1) Personal... first aid as set out in table A-VI/1-3 of the STCW Code. (4) Personal safety and social responsibilities... of competence set out in STCW Regulation III/4 and Section A-III/4 of the STCW Code (incorporated by...

Medicare and Medicaid Programs; Fire Safety Requirements for Certain Health Care Facilities. Final rule.

PubMed

2016-05-04

This final rule will amend the fire safety standards for Medicare and Medicaid participating hospitals, critical access hospitals (CAHs), long-term care facilities, intermediate care facilities for individuals with intellectual disabilities (ICF-IID), ambulatory surgery centers (ASCs), hospices which provide inpatient services, religious non-medical health care institutions (RNHCIs), and programs of all-inclusive care for the elderly (PACE) facilities. Further, this final rule will adopt the 2012 edition of the Life Safety Code (LSC) and eliminate references in our regulations to all earlier editions of the Life Safety Code. It will also adopt the 2012 edition of the Health Care Facilities Code, with some exceptions.

Rail Safety/Equipment Crashworthiness : Volume 3. Proposed Engineering Standards.

DOT National Transportation Integrated Search

1978-07-01

The document, the third of four volumes, contains recommended Engineering Standards prepared in the format of the standards published in the Code of Federal Regulations (Title 49, Transportation, Parts 200). The standards proposed provide improved oc...

49 CFR Appendix C to Part 215 - FRA Freight Car Standards Defect Code

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false FRA Freight Car Standards Defect Code C Appendix C... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Pt. 215, App. C Appendix C to... 13/4″. (C)(1) Rim thickness is 11/16″ or less; (2) Rim thickness is 5/8″ or less; (3) Rim thickness...

[Topics of occupational medicine and environment in codes and social accountability standards of business].

PubMed

Denisov, E I; Golovaneva, G V; Potapenko, A A

2005-01-01

The problems of social accountability as applied to the occupational safety, health and environment are discussed. Russian and international codes and standards in the field are reviewed. Legal duties and rights of employers in occupational risk management for workers' health are considered. Some ethical aspects including health protection of female workers are discussed.

Safety Criticality Standards Using the French CRISTAL Code Package: Application to the AREVA NP UO{sub 2} Fuel Fabrication Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doucet, M.; Durant Terrasson, L.; Mouton, J.

2006-07-01

Criticality safety evaluations implement requirements to proof of sufficient sub critical margins outside of the reactor environment for example in fuel fabrication plants. Basic criticality data (i.e., criticality standards) are used in the determination of sub critical margins for all processes involving plutonium or enriched uranium. There are several criticality international standards, e.g., ARH-600, which is one the US nuclear industry relies on. The French Nuclear Safety Authority (DGSNR and its advising body IRSN) has requested AREVA NP to review the criticality standards used for the evaluation of its Low Enriched Uranium fuel fabrication plants with CRISTAL V0, the recentlymore » updated French criticality evaluation package. Criticality safety is a concern for every phase of the fabrication process including UF{sub 6} cylinder storage, UF{sub 6}-UO{sub 2} conversion, powder storage, pelletizing, rod loading, assembly fabrication, and assembly transportation. Until 2003, the accepted criticality standards were based on the French CEA work performed in the late seventies with the APOLLO1 cell/assembly computer code. APOLLO1 is a spectral code, used for evaluating the basic characteristics of fuel assemblies for reactor physics applications, which has been enhanced to perform criticality safety calculations. Throughout the years, CRISTAL, starting with APOLLO1 and MORET 3 (a 3D Monte Carlo code), has been improved to account for the growth of its qualification database and for increasing user requirements. Today, CRISTAL V0 is an up-to-date computational tool incorporating a modern basic microscopic cross section set based on JEF2.2 and the comprehensive APOLLO2 and MORET 4 codes. APOLLO2 is well suited for criticality standards calculations as it includes a sophisticated self shielding approach, a P{sub ij} flux determination, and a 1D transport (S{sub n}) process. CRISTAL V0 is the result of more than five years of development work focusing on theoretical approaches and the implementation of user-friendly graphical interfaces. Due to its comprehensive physical simulation and thanks to its broad qualification database with more than a thousand benchmark/calculation comparisons, CRISTAL V0 provides outstanding and reliable accuracy for criticality evaluations for configurations covering the entire fuel cycle (i.e. from enrichment, pellet/assembly fabrication, transportation, to fuel reprocessing). After a brief description of the calculation scheme and the physics algorithms used in this code package, results for the various fissile media encountered in a UO{sub 2} fuel fabrication plant will be detailed and discussed. (authors)« less

30 CFR 57.19096 - Familiarity with signal code.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 57.19096 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Personnel... signals for cages, skips, and mantrips when persons or materials are being transported shall be familiar...

30 CFR 56.19096 - Familiarity with signal code.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 56.19096 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personnel... signals for cages, skips, and mantrips when persons or materials are being transported shall be familiar...

10 CFR 851.27 - Reference sources.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) American Society of Mechanical Engineers (ASME), P.O. Box 2300 Fairfield, NJ 07007. Telephone: 800-843-2763... Electrical Code,” (2005). (5) NFPA 70E, “Standard for Electrical Safety in the Workplace,” (2004). (6... Engineers (ASME) Boilers and Pressure Vessel Code, sections I through XII including applicable Code Cases...

10 CFR 851.27 - Reference sources.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) American Society of Mechanical Engineers (ASME), P.O. Box 2300 Fairfield, NJ 07007. Telephone: 800-843-2763... Electrical Code,” (2005). (5) NFPA 70E, “Standard for Electrical Safety in the Workplace,” (2004). (6... Engineers (ASME) Boilers and Pressure Vessel Code, sections I through XII including applicable Code Cases...

30 CFR 905.816 - Performance standards-Surface mining activities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

30 CFR 905.817 - Performance standards-Underground mining activities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

30 CFR 905.817 - Performance standards-Underground mining activities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

30 CFR 905.816 - Performance standards-Surface mining activities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

30 CFR 905.816 - Performance standards-Surface mining activities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

30 CFR 905.817 - Performance standards-Underground mining activities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

30 CFR 905.816 - Performance standards-Surface mining activities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

30 CFR 905.817 - Peformance standards-Underground mining activities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

38 CFR 39.63 - Architectural design standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Association Life Safety Code and Errata (NFPA 101), the 2003 edition of the NFPA 5000, Building Construction... section, all applicable local and State building codes and regulations must be observed. In areas not subject to local or State building codes, the recommendations contained in the 2003 edition of the NFPA...

29 CFR 1910.36 - Design and construction requirements for exit routes.

Code of Federal Regulations, 2012 CFR

2012-07-01

....36 Section 1910.36 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Exit Routes and Emergency Planning... of exit routes necessary for your workplace, consult NFPA 101-2000, Life Safety Code. (c) Exit...

Code of Practice for Scientific Diving: Principles for the Safe Practice of Scientific Diving in Different Environments. Unesco Technical Papers in Marine Science 53.

ERIC Educational Resources Information Center

Flemming, N. C., Ed.; Max, M. D., Ed.

This publication has been prepared to provide scientific divers with guidance on safe practice under varying experimental and environmental conditions. The Code offers advice and recommendations on administrative practices, insurance, terms of employment, medical standards, training standards, dive planning, safety with different breathing gases…

25 CFR 559.5 - What must a tribe submit to the Chairman with the copy of each facility license that has been...

Code of Federal Regulations, 2011 CFR

2011-04-01

... on the environment and the public health and safety, as well as mitigating measures the tribe may... environment and public health and safety. ... public health and safety laws, resolutions, codes, policies, standards or procedures applicable to its...

25 CFR 559.5 - What must a tribe submit to the Chairman with the copy of each facility license that has been...

Code of Federal Regulations, 2012 CFR

2012-04-01

... on the environment and the public health and safety, as well as mitigating measures the tribe may... environment and public health and safety. ... public health and safety laws, resolutions, codes, policies, standards or procedures applicable to its...

25 CFR 559.5 - What must a tribe submit to the Chairman with the copy of each facility license that has been...

Code of Federal Regulations, 2010 CFR

2010-04-01

... on the environment and the public health and safety, as well as mitigating measures the tribe may... environment and public health and safety. ... public health and safety laws, resolutions, codes, policies, standards or procedures applicable to its...

3 CFR 8672 - Proclamation 8672 of May 9, 2011. National Building Safety Month, 2011

Code of Federal Regulations, 2012 CFR

2012-01-01

... public and private sectors—to implement effective standards and codes that sustain safe and resilient structures. We need innovation and partnerships at all levels of society to develop transformative... Proclamation Building safety is a critical component of our homeland security, our personal and public safety...

30 CFR 75.1107-16 - Inspection of fire suppression devices.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-16 Section 75.1107-16 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Fire Protection Fire... Systems” (NFPA No. 11A—1970). National Fire Code No. 13A “Care and Maintenance of Sprinkler Systems” (NFPA...

30 CFR 75.1107-16 - Inspection of fire suppression devices.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-16 Section 75.1107-16 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Fire Protection Fire... Systems” (NFPA No. 11A—1970). National Fire Code No. 13A “Care and Maintenance of Sprinkler Systems” (NFPA...

Assessment of radiological protection systems among diagnostic radiology facilities in North East India.

PubMed

Singh, Thokchom Dewan; Jayaraman, T; Arunkumar Sharma, B

2017-03-01

This study aims to assess the adequacy level of radiological protection systems available in the diagnostic radiology facilities located in three capital cities of North East (NE) India. It further attempts to understand, using a multi-disciplinary approach, how the safety codes/standards in diagnostic radiology framed by the Atomic Energy Regulatory Board (AERB) and the International Atomic Energy Agency (IAEA) to achieve adequate radiological protection in facilities, have been perceived, conceptualized, and applied accordingly in these facilities. About 30 diagnostic radiology facilities were randomly selected from three capitals of states in NE India; namely Imphal (Manipur), Shillong (Meghalaya) and Guwahati (Assam). A semi-structured questionnaire developed based on a multi-disciplinary approach was used for this study. It was observed that radiological practices undertaken in these facilities were not exactly in line with safety codes/standards in diagnostic radiology of the AERB and the IAEA. About 50% of the facilities had registered/licensed x-ray equipment with the AERB. More than 80% of the workers did not use radiation protective devices, although these devices were available in the facilities. About 85% of facilities had no institutional risk management system. About 70% of the facilities did not carry out periodic quality assurance testing of their x-ray equipment or surveys of radiation leakage around the x-ray room, and did not display radiation safety indicators in the x-ray rooms. Workers in these facilities exhibited low risk perception about the risks associated with these practices. The majority of diagnostic radiology facilities in NE India did not comply with the radiological safety codes/standards framed by the AERB and IAEA. The study found inadequate levels of radiological protection systems in the majority of facilities. This study suggests a need to establish firm measures that comply with the radiological safety codes/standards of the AERB and IAEA to protect patients, workers and the public of this region.

Proceedings of the 21st DOE/NRC Nuclear Air Cleaning Conference; Sessions 1--8

DOE Office of Scientific and Technical Information (OSTI.GOV)

First, M.W.

1991-02-01

Separate abstracts have been prepared for the papers presented at the meeting on nuclear facility air cleaning technology in the following specific areas of interest: air cleaning technologies for the management and disposal of radioactive wastes; Canadian waste management program; radiological health effects models for nuclear power plant accident consequence analysis; filter testing; US standard codes on nuclear air and gas treatment; European community nuclear codes and standards; chemical processing off-gas cleaning; incineration and vitrification; adsorbents; nuclear codes and standards; mathematical modeling techniques; filter technology; safety; containment system venting; and nuclear air cleaning programs around the world. (MB)

78 FR 49412 - Personal Flotation Devices Labeling and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-14

...The Coast Guard proposes to remove references to type codes in its regulations on the carriage and labeling of Coast Guard-approved personal flotation devices (PFDs). PFD type codes are unique to Coast Guard approval and are not well understood by the public. Removing these type codes from our regulations would facilitate future incorporation by reference of new industry consensus standards for PFD labeling that will more effectively convey safety information, and is a step toward harmonization of our regulations with PFD requirements in Canada and in other countries.

Development of photovoltaic array and module safety requirements

NASA Technical Reports Server (NTRS)

1982-01-01

Safety requirements for photovoltaic module and panel designs and configurations likely to be used in residential, intermediate, and large-scale applications were identified and developed. The National Electrical Code and Building Codes were reviewed with respect to present provisions which may be considered to affect the design of photovoltaic modules. Limited testing, primarily in the roof fire resistance field was conducted. Additional studies and further investigations led to the development of a proposed standard for safety for flat-plate photovoltaic modules and panels. Additional work covered the initial investigation of conceptual approaches and temporary deployment, for concept verification purposes, of a differential dc ground-fault detection circuit suitable as a part of a photovoltaic array safety system.

MODFLOW 2.0: A program for predicting moderator flow patterns

NASA Astrophysics Data System (ADS)

Peterson, P. F.; Paik, I. K.

1991-07-01

Sudden changes in the temperature of flowing liquids can result in transient buoyancy forces which strongly impact the flow hydrodynamics via flow stratification. These effects have been studied for the case of potential flow of stratified liquids to line sinks, but not for moderator flow in SRS reactors. Standard codes, such as TRAC and COMMIX, do not have the capability to capture the stratification effect, due to strong numerical diffusion which smears away the hot/cold fluid interface. A related problem with standard codes is the inability to track plumes injected into the liquid flow, again due to numerical diffusion. The combined effects of buoyant stratification and plume dispersion have been identified as being important in the operation of the Supplementary Safety System which injects neutron-poison ink into SRS reactors to provide safe shutdown in the event of safety rod failure. The MODFLOW code discussed here provides transient moderator flow pattern information with stratification effects, and tracks the location of ink plumes in the reactor. The code, written in Fortran, is compiled for Macintosh II computers, and includes subroutines for interactive control and graphical output. Removing the graphics capabilities, the code can also be compiled on other computers. With graphics, in addition to the capability to perform safety related computations, MODFLOW also provides an easy tool for becoming familiar with flow distributions in SRS reactors.

A hybrid design methodology for structuring an Integrated Environmental Management System (IEMS) for shipping business.

PubMed

Celik, Metin

2009-03-01

The International Safety Management (ISM) Code defines a broad framework for the safe management and operation of merchant ships, maintaining high standards of safety and environmental protection. On the other hand, ISO 14001:2004 provides a generic, worldwide environmental management standard that has been utilized by several industries. Both the ISM Code and ISO 14001:2004 have the practical goal of establishing a sustainable Integrated Environmental Management System (IEMS) for shipping businesses. This paper presents a hybrid design methodology that shows how requirements from both standards can be combined into a single execution scheme. Specifically, the Analytic Hierarchy Process (AHP) and Fuzzy Axiomatic Design (FAD) are used to structure an IEMS for ship management companies. This research provides decision aid to maritime executives in order to enhance the environmental performance in the shipping industry.

Safety with surgical lasers.

PubMed

McKenzie, A L

1984-01-01

As the sales of surgical lasers continue to grow, the problem of laser safety in hospitals becomes increasingly more urgent. This article considers both the principles and the practice of laser safety, and indicates how safety codes should be organized within a hospital. Eye safety is of paramount importance, and the effects of different wavelengths of laser radiation on the eye are described, both for intrabeam and extended-source exposure. An account is given of the concept of Maximum Permissible Exposure (MPE) and how it depends upon wavelength and exposure duration. The standard laser classification is developed in relation to MPE. The use of laser protective eyewear is discussed for the surgeon, other theatre staff and the patient. Finally, the role of the Laser Protection Supervisor and of the Laser Protection Adviser are explained in the context of establishing a local laser safety code.

Test Operations Procedure (TOP) 03-2-504A Safety Evaluation of Small Arms and Medium Caliber Weapons

DTIC Science & Technology

2013-05-29

Assessment HHAR Health Hazard Assessment Report HERO Hazards of Electromagnetic Radiation to Ordnance in. inch J Joule km/hr kilometers per hour...help standardize testing and to specify tests commonly used to identify and assess safety hazards associated with the use of small arms. The...19b. TELEPHONE NUMBER (include area code) Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39-18

Automatic Implementation of Ttethernet-Based Time-Triggered Avionics Applications

NASA Astrophysics Data System (ADS)

Gorcitz, Raul Adrian; Carle, Thomas; Lesens, David; Monchaux, David; Potop-Butucaruy, Dumitru; Sorel, Yves

2015-09-01

The design of safety-critical embedded systems such as those used in avionics still involves largely manual phases. But in avionics the definition of standard interfaces embodied in standards such as ARINC 653 or TTEthernet should allow the definition of fully automatic code generation flows that reduce the costs while improving the quality of the generated code, much like compilers have done when replacing manual assembly coding. In this paper, we briefly present such a fully automatic implementation tool, called Lopht, for ARINC653-based time-triggered systems, and then explain how it is currently extended to include support for TTEthernet networks.

Hydrogen Infrastructure Testing and Research Facility Video (Text Version)

Science.gov Websites

grid integration, continuous code improvement, fuel cell vehicle operation, and renewable hydrogen stations. NRELs research on hydrogen safety provides guidance for safe operation, handling, and use of standards and testing fuel cell and hydrogen components for operation and safety. Building on NRELs Wind-to

42 CFR 416.44 - Condition for coverage-Environment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 3 2014-10-01 2014-10-01 false Condition for coverage-Environment. 416.44 Section... constructed, equipped, and maintained to protect the health and safety of patients. (a) Standard: Physical... Health Care Centers of the 2000 edition of the Life Safety Code of the National Fire Protection...

42 CFR 416.44 - Condition for coverage-Environment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 3 2012-10-01 2012-10-01 false Condition for coverage-Environment. 416.44 Section... constructed, equipped, and maintained to protect the health and safety of patients. (a) Standard: Physical... Health Care Centers of the 2000 edition of the Life Safety Code of the National Fire Protection...

78 FR 21186 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... certain provisions of the Federal railroad safety regulations contained at Title 49 Code of Federal Regulations (CFR) Part 223, Safety Glazing Standards-Locomotives, Passenger Cars and Cabooses, which requires.... There is no location or time where another train will be passing a FCRV train; therefore, there is no...

76 FR 38453 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-30

...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... compliance from certain provisions of the Federal railroad safety regulations contained at 49 CFR Parts 215... waiver of compliance from certain provisions of the Railroad Freight Car Safety Standards, 49 CFR 215.303...

76 FR 38454 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-30

...] Petition for Waiver of Compliance In accordance with part 211 of Title 49 of the Code of Federal... of compliance from certain provisions of the Federal railroad safety regulations contained at 49 CFR... a waiver of compliance from the Railroad Freight Car Safety Standards, 49 CFR 215.303, which...

76 FR 39977 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... compliance from certain provisions of the Federal railroad safety regulations contained at 49 CFR 215.303... waiver of compliance from certain provisions of the Railroad Freight Car Safety Standards, 49 CFR 215.303...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Electronics Engineers, Inc. ANSI/IEEE C2-2007, The National Electrical Safety Code, 2007 edition, approved.../Electronics Industries Association (TIA/EIA) standards are available from Electronic Industries Association...

30 CFR 72.710 - Selection, fit, use, and maintenance of approved respirators.

Code of Federal Regulations, 2012 CFR

2012-07-01

.../code_of_federal_regulations/ibr_locations.html. This incorporation by reference was approved by the..., DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH HEALTH STANDARDS FOR COAL MINES Miscellaneous § 72.710...; http://www.ansi.org, and may be inspected at any MSHA Coal Mine Safety and Health district office, or...

30 CFR 72.710 - Selection, fit, use, and maintenance of approved respirators.

Code of Federal Regulations, 2013 CFR

2013-07-01

.../code_of_federal_regulations/ibr_locations.html. This incorporation by reference was approved by the..., DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH HEALTH STANDARDS FOR COAL MINES Miscellaneous § 72.710...; http://www.ansi.org, and may be inspected at any MSHA Coal Mine Safety and Health district office, or...

30 CFR 72.710 - Selection, fit, use, and maintenance of approved respirators.

Code of Federal Regulations, 2014 CFR

2014-07-01

.../code_of_federal_regulations/ibr_locations.html. This incorporation by reference was approved by the..., DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH HEALTH STANDARDS FOR COAL MINES Miscellaneous § 72.710...; http://www.ansi.org, and may be inspected at any MSHA Coal Mine Safety and Health district office, or...

Lidar performance analysis

NASA Technical Reports Server (NTRS)

Spiers, Gary D.

1994-01-01

Section 1 details the theory used to build the lidar model, provides results of using the model to evaluate AEOLUS design instrument designs, and provides snapshots of the visual appearance of the coded model. Appendix A contains a Fortran program to calculate various forms of the refractive index structure function. This program was used to determine the refractive index structure function used in the main lidar simulation code. Appendix B contains a memo on the optimization of the lidar telescope geometry for a line-scan geometry. Appendix C contains the code for the main lidar simulation and brief instruction on running the code. Appendix D contains a Fortran code to calculate the maximum permissible exposure for the eye from the ANSI Z136.1-1992 eye safety standards. Appendix E contains a paper on the eye safety analysis of a space-based coherent lidar presented at the 7th Coherent Laser Radar Applications and Technology Conference, Paris, France, 19-23 July 1993.

Program for developing and implementing a new approach to designing for fire safety in buildings

NASA Technical Reports Server (NTRS)

1975-01-01

The traditional method of providing for fire safety in buildings through reliance on codes and standards that prescribe specific measures to be taken in the design and construction of buildings to minimize the potential for a fire occurring and to protect property and life should a fire occur was evaluated. A new approach to designing for fire safety in buildings is outlined.

SCALE: A modular code system for performing Standardized Computer Analyses for Licensing Evaluation. Volume 1, Part 2: Control modules S1--H1; Revision 5

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automated the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system hasmore » been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.3 of the system.« less

Demonstration of emulator-based Bayesian calibration of safety analysis codes: Theory and formulation

DOE PAGES

Yurko, Joseph P.; Buongiorno, Jacopo; Youngblood, Robert

2015-05-28

System codes for simulation of safety performance of nuclear plants may contain parameters whose values are not known very accurately. New information from tests or operating experience is incorporated into safety codes by a process known as calibration, which reduces uncertainty in the output of the code and thereby improves its support for decision-making. The work reported here implements several improvements on classic calibration techniques afforded by modern analysis techniques. The key innovation has come from development of code surrogate model (or code emulator) construction and prediction algorithms. Use of a fast emulator makes the calibration processes used here withmore » Markov Chain Monte Carlo (MCMC) sampling feasible. This study uses Gaussian Process (GP) based emulators, which have been used previously to emulate computer codes in the nuclear field. The present work describes the formulation of an emulator that incorporates GPs into a factor analysis-type or pattern recognition-type model. This “function factorization” Gaussian Process (FFGP) model allows overcoming limitations present in standard GP emulators, thereby improving both accuracy and speed of the emulator-based calibration process. Calibration of a friction-factor example using a Method of Manufactured Solution is performed to illustrate key properties of the FFGP based process.« less

Analyses in support of risk-informed natural gas vehicle maintenance facility codes and standards :

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ekoto, Isaac W.; Blaylock, Myra L.; LaFleur, Angela Christine

2014-03-01

Safety standards development for maintenance facilities of liquid and compressed gas fueled large-scale vehicles is required to ensure proper facility design and operation envelopes. Standard development organizations are utilizing risk-informed concepts to develop natural gas vehicle (NGV) codes and standards so that maintenance facilities meet acceptable risk levels. The present report summarizes Phase I work for existing NGV repair facility code requirements and highlights inconsistencies that need quantitative analysis into their effectiveness. A Hazardous and Operability study was performed to identify key scenarios of interest. Finally, scenario analyses were performed using detailed simulations and modeling to estimate the overpressure hazardsmore » from HAZOP defined scenarios. The results from Phase I will be used to identify significant risk contributors at NGV maintenance facilities, and are expected to form the basis for follow-on quantitative risk analysis work to address specific code requirements and identify effective accident prevention and mitigation strategies.« less

A curfew on women.

PubMed

McDonald, Elsie

1991-04-24

Shortly after I read Christopher Goodall's excellent piece on pornography (A Social Disease? Nursing Standard, March 20), the British Safety Council launched a code to protect lone women drivers whose cars break down.

Department of Transportation, National Highway Traffic Safety Administration : light truck average fuel economy standard, model year 1999

DOT National Transportation Integrated Search

1997-04-18

Section 32902(a) of title 49, United States Code, requires the Secretary of Transportation to prescribe by regulation, at least 18 months in advance of each model year, average fuel economy standards (known as "Corporate Average Fuel Economy" or "CAF...

Assessment of Literature Related to Combustion Appliance Venting Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rapp, V. H.; Less, B. D.; Singer, B. C.

In many residential building retrofit programs, air tightening to increase energy efficiency is often constrained by safety concerns with naturally vented combustion appliances. Tighter residential buildings more readily depressurize when exhaust equipment is operated, making combustion appliances more prone to backdraft or spill combustion exhaust into the living space. Several measures, such as installation guidelines, vent sizing codes, and combustion safety diagnostics, are in place with the intent to prevent backdrafting and combustion spillage, but the diagnostics conflict and the risk mitigation objective is inconsistent. This literature review summarizes the metrics and diagnostics used to assess combustion safety, documents theirmore » technical basis, and investigates their risk mitigations. It compiles information from the following: codes for combustion appliance venting and installation; standards and guidelines for combustion safety diagnostics; research evaluating combustion safety diagnostics; research investigating wind effects on building depressurization and venting; and software for simulating vent system performance.« less

NASIS data base management system - IBM 360/370 OS MVT implementation. 1: Installation standards

NASA Technical Reports Server (NTRS)

1973-01-01

The installation standards for the NASA Aerospace Safety Information System (NASIS) data base management system are presented. The standard approach to preparing systems documentation and the program design and coding rules and conventions are outlined. Included are instructions for preparing all major specifications and suggestions for improving the quality and efficiency of the programming task.

Bar Coding and Tracking in Pathology.

PubMed

Hanna, Matthew G; Pantanowitz, Liron

2016-03-01

Bar coding and specimen tracking are intricately linked to pathology workflow and efficiency. In the pathology laboratory, bar coding facilitates many laboratory practices, including specimen tracking, automation, and quality management. Data obtained from bar coding can be used to identify, locate, standardize, and audit specimens to achieve maximal laboratory efficiency and patient safety. Variables that need to be considered when implementing and maintaining a bar coding and tracking system include assets to be labeled, bar code symbologies, hardware, software, workflow, and laboratory and information technology infrastructure as well as interoperability with the laboratory information system. This article addresses these issues, primarily focusing on surgical pathology. Copyright © 2016 Elsevier Inc. All rights reserved.

Bar Coding and Tracking in Pathology.

PubMed

Hanna, Matthew G; Pantanowitz, Liron

2015-06-01

Bar coding and specimen tracking are intricately linked to pathology workflow and efficiency. In the pathology laboratory, bar coding facilitates many laboratory practices, including specimen tracking, automation, and quality management. Data obtained from bar coding can be used to identify, locate, standardize, and audit specimens to achieve maximal laboratory efficiency and patient safety. Variables that need to be considered when implementing and maintaining a bar coding and tracking system include assets to be labeled, bar code symbologies, hardware, software, workflow, and laboratory and information technology infrastructure as well as interoperability with the laboratory information system. This article addresses these issues, primarily focusing on surgical pathology. Copyright © 2015 Elsevier Inc. All rights reserved.

Shielding calculation and criticality safety analysis of spent fuel transportation cask in research reactors.

PubMed

Mohammadi, A; Hassanzadeh, M; Gharib, M

2016-02-01

In this study, shielding calculation and criticality safety analysis were carried out for general material testing reactor (MTR) research reactors interim storage and relevant transportation cask. During these processes, three major terms were considered: source term, shielding, and criticality calculations. The Monte Carlo transport code MCNP5 was used for shielding calculation and criticality safety analysis and ORIGEN2.1 code for source term calculation. According to the results obtained, a cylindrical cask with body, top, and bottom thicknesses of 18, 13, and 13 cm, respectively, was accepted as the dual-purpose cask. Furthermore, it is shown that the total dose rates are below the normal transport criteria that meet the standards specified. Copyright © 2015 Elsevier Ltd. All rights reserved.

75 FR 12123 - Federal Motor Vehicle Safety Standards; Side Impact Protection; Fuel System Integrity; Electric...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-15

... chapter 301 of title 49, United States Code, to establish a standard designed to enhance passenger motor... criterion overemphasizes pelvic protection, which could result in designs that overload the thorax. The... the June 2008 final rule, manufacturers will have sufficient time to design the necessary...

Hoisting and Rigging (Formerly Hoisting and Rigging Manual)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

This standard is intended as a reference document to be used by supervisors, line managers, safety personnel, equipment operators, and any other personnel responsible for safety of hoisting and rigging operations at DOE sites. It quotes or paraphrases the US OSHA and ANSI requirements. It also encompasses, under one cover,hoisting and rigging requirements, codes, standards, and regulations, eliminating the need to maintain extensive (and often incomplete) libraries of hoisting and rigging standards throughout DOE. The standard occasionally goes beyond the minimum general industry standards established by OSHA and ANSI, and also delineates the more stringent requirements necessary to accomplish themore » complex, diversified, critical, and often hazardous hoisting and rigging work found with the DOE complex.« less

Comparing the coding of complications in Queensland and Victorian admitted patient data.

PubMed

Michel, Jude L; Cheng, Diana; Jackson, Terri J

2011-08-01

To examine differences between Queensland and Victorian coding of hospital-acquired conditions and suggest ways to improve the usefulness of these data in the monitoring of patient safety events. Secondary analysis of admitted patient episode data collected in Queensland and Victoria. Comparison of depth of coding, and patterns in the coding of ten commonly coded complications of five elective procedures. Comparison of the mean complication codes assigned per episode revealed Victoria assigns more valid codes than Queensland for all procedures, with the difference between the states being significantly different in all cases. The proportion of the codes flagged as complications was consistently lower for Queensland when comparing 10 common complications for each of the five selected elective procedures. The estimated complication rates for the five procedures showed Victoria to have an apparently higher complication rate than Queensland for 35 of the 50 complications examined. Our findings demonstrate that the coding of complications is more comprehensive in Victoria than in Queensland. It is known that inconsistencies exist between states in routine hospital data quality. Comparative use of patient safety indicators should be viewed with caution until standards are improved across Australia. More exploration of data quality issues is needed to identify areas for improvement.

High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 7

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-04-01

This Requirements Identification Document (RID) describes an Occupational Health and Safety Program as defined through the Relevant DOE Orders, regulations, industry codes/standards, industry guidance documents and, as appropriate, good industry practice. The definition of an Occupational Health and Safety Program as specified by this document is intended to address Defense Nuclear Facilities Safety Board Recommendations 90-2 and 91-1, which call for the strengthening of DOE complex activities through the identification and application of relevant standards which supplement or exceed requirements mandated by DOE Orders. This RID applies to the activities, personnel, structures, systems, components, and programs involved in maintaining themore » facility and executing the mission of the High-Level Waste Storage Tank Farms.« less

29 CFR 1910.6 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-63 Safety Standard for Non-Medical X-Ray and Sealed Gamma Ray Sources, IBR approved for § 1910.252(d...). (8) ANSI A14.2-56 Safety Code for Portable Metal Ladders, Supplemented by ANSI A14.2a-77, IBR... Conveyors, Cableways, and Related Equipment, IBR approved for §§ 1910.218(j)(3); 1910.261 (a)(3)(x), (b)(1...

Delegation – a question of safety.

PubMed

Dean, Erin

2015-04-15

The NMC's revised Code strengthens considerably the regulator's standard on delegation. It underlines that registrants remain accountable for the tasks they delegate. They must ensure anyone to whom they delegate is competent, adequately supervised and properly supported.

Medicare and Medicaid programs; fire safety requirements for certain health care facilities. Final rule.

PubMed

2003-01-10

This final rule amends the fire safety standards for hospitals, long-term care facilities, intermediate care facilities for the mentally retarded, ambulatory surgery centers, hospices that provide inpatient services, religious nonmedical health care institutions, critical access hospitals, and Programs of All-Inclusive Care for the Elderly facilities. Further, this final rule adopts the 2000 edition of the Life Safety Code and eliminates references in our regulations to all earlier editions.

Automatic Certification of Kalman Filters for Reliable Code Generation

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd; Schumann, Johann; Richardson, Julian

2005-01-01

AUTOFILTER is a tool for automatically deriving Kalman filter code from high-level declarative specifications of state estimation problems. It can generate code with a range of algorithmic characteristics and for several target platforms. The tool has been designed with reliability of the generated code in mind and is able to automatically certify that the code it generates is free from various error classes. Since documentation is an important part of software assurance, AUTOFILTER can also automatically generate various human-readable documents, containing both design and safety related information. We discuss how these features address software assurance standards such as DO-178B.

Formal Safety Certification of Aerospace Software

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd

2005-01-01

In principle, formal methods offer many advantages for aerospace software development: they can help to achieve ultra-high reliability, and they can be used to provide evidence of the reliability claims which can then be subjected to external scrutiny. However, despite years of research and many advances in the underlying formalisms of specification, semantics, and logic, formal methods are not much used in practice. In our opinion this is related to three major shortcomings. First, the application of formal methods is still expensive because they are labor- and knowledge-intensive. Second, they are difficult to scale up to complex systems because they are based on deep mathematical insights about the behavior of the systems (t.e., they rely on the "heroic proof"). Third, the proofs can be difficult to interpret, and typically stand in isolation from the original code. In this paper, we describe a tool for formally demonstrating safety-relevant aspects of aerospace software, which largely circumvents these problems. We focus on safely properties because it has been observed that safety violations such as out-of-bounds memory accesses or use of uninitialized variables constitute the majority of the errors found in the aerospace domain. In our approach, safety means that the program will not violate a set of rules that can range for the simple memory access rules to high-level flight rules. These different safety properties are formalized as different safety policies in Hoare logic, which are then used by a verification condition generator along with the code and logical annotations in order to derive formal safety conditions; these are then proven using an automated theorem prover. Our certification system is currently integrated into a model-based code generation toolset that generates the annotations together with the code. However, this automated formal certification technology is not exclusively constrained to our code generator and could, in principle, also be integrated with other code generators such as RealTime Workshop or even applied to legacy code. Our approach circumvents the historical problems with formal methods by increasing the degree of automation on all levels. The restriction to safety policies (as opposed to arbitrary functional behavior) results in simpler proof problems that can generally be solved by fully automatic theorem proves. An automated linking mechanism between the safety conditions and the code provides some of the traceability mandated by process standards such as DO-178B. An automated explanation mechanism uses semantic markup added by the verification condition generator to produce natural-language explanations of the safety conditions and thus supports their interpretation in relation to the code. It shows an automatically generated certification browser that lets users inspect the (generated) code along with the safety conditions (including textual explanations), and uses hyperlinks to automate tracing between the two levels. Here, the explanations reflect the logical structure of the safety obligation but the mechanism can in principle be customized using different sets of domain concepts. The interface also provides some limited control over the certification process itself. Our long-term goal is a seamless integration of certification, code generation, and manual coding that results in a "certified pipeline" in which specifications are automatically transformed into executable code, together with the supporting artifacts necessary for achieving and demonstrating the high level of assurance needed in the aerospace domain.

Ensuring the validity of calculated subcritical limits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, H.K.

1977-01-01

The care taken at the Savannah River Laboratory and Plant to ensure the validity of calculated subcritical limits is described. Close attention is given to ANSI N16.1-1975, ''Validation of Calculational Methods for Nuclear Criticality Safety.'' The computer codes used for criticality safety computations, which are listed and are briefly described, have been placed in the SRL JOSHUA system to facilitate calculation and to reduce input errors. A driver module, KOKO, simplifies and standardizes input and links the codes together in various ways. For any criticality safety evaluation, correlations of the calculational methods are made with experiment to establish bias. Occasionallymore » subcritical experiments are performed expressly to provide benchmarks. Calculated subcritical limits contain an adequate but not excessive margin to allow for uncertainty in the bias. The final step in any criticality safety evaluation is the writing of a report describing the calculations and justifying the margin.« less

Final Technical Report for GO17004 Regulatory Logic: Codes and Standards for the Hydrogen Economy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakarado, Gary L.

The objectives of this project are to: develop a robust supporting research and development program to provide critical hydrogen behavior data and a detailed understanding of hydrogen combustion and safety across a range of scenarios, needed to establish setback distances in building codes and minimize the overall data gaps in code development; support and facilitate the completion of technical specifications by the International Organization for Standardization (ISO) for gaseous hydrogen refueling (TS 20012) and standards for on-board liquid (ISO 13985) and gaseous or gaseous blend (ISO 15869) hydrogen storage by 2007; support and facilitate the effort, led by the NFPA,more » to complete the draft Hydrogen Technologies Code (NFPA 2) by 2008; with experimental data and input from Technology Validation Program element activities, support and facilitate the completion of standards for bulk hydrogen storage (e.g., NFPA 55) by 2008; facilitate the adoption of the most recently available model codes (e.g., from the International Code Council [ICC]) in key regions; complete preliminary research and development on hydrogen release scenarios to support the establishment of setback distances in building codes and provide a sound basis for model code development and adoption; support and facilitate the development of Global Technical Regulations (GTRs) by 2010 for hydrogen vehicle systems under the United Nations Economic Commission for Europe, World Forum for Harmonization of Vehicle Regulations and Working Party on Pollution and Energy Program (ECE-WP29/GRPE); and to Support and facilitate the completion by 2012 of necessary codes and standards needed for the early commercialization and market entry of hydrogen energy technologies.« less

Feasibility and Top Level Design of a Scalable Emergency Response System for Oceangoing Assets

DTIC Science & Technology

2008-10-20

hazard response. The DC is responsible for the initial response. In a small-scale hazard situation, the DC will assign a Risk Assessment Code (RAC) and...Qualification Standard R&D Research and Development RAC Risk Assessment Code RADSAFE Radiological Safety RAM Rolling Airframe Missile RFID Radio...easily be used for other environmental remediation efforts including Superfund sites, decommissioned Navy vessels and Brownfield locations, among others

Application of the Life Safety Code to a Historic Test Stand

NASA Technical Reports Server (NTRS)

Askins, Bruce; Lemke, Paul R.; Lewis, William L.; Covell, Carol C.

2011-01-01

NASA has conducted a study to assess alternatives to refurbishing existing launch vehicle modal test facilities as opposed to developing new test facilities to meet the demands of a very fiscally constrained test and evaluation environment. The results of this study showed that Marshall Space Flight Center (MSFC) Test Stand (TS) 4550 could be made compliant, within reasonable cost and schedule impacts, if safety processes and operational limitations were put in place to meet the safety codes and concerns of the Fire Marshall. Trades were performed with key selection criteria to ensure that appropriate levels of occupant safety are incorporated into test facility design modifications. In preparation for the ground vibration tests that were to be performed on the Ares I launch vehicle, the Ares Flight and Integrated Test Office (FITO) organization evaluated the available test facility options, which included the existing mothballed structural dynamic TS4550 used by Apollo and Shuttle, alternative ground vibration test facilities at other locations, and construction of a new dynamic test stand. After an exhaustive assessment of the alternatives, the results favored modifying the TS4550 because it was the lowest cost option and presented the least schedule risk to the NASA Constellation Program for Ares Integrated Vehicle Ground Vibration Test (IVGVT). As the renovation design plans and drawings were being developed for TS4550, a safety concern was discovered the original design for the construction of the test stand, originally built for the Apollo Program and renovated for the Shuttle Program, was completed before NASA s adoption of the currently imposed safety and building codes per National Fire Protection Association Life Safety Code [NFPA 101] and International Building Codes. The initial FITO assessment of the design changes, required to make TS4550 compliant with current safety and building standards, identified a significant cost increase and schedule impact. An effort was launched to thoroughly evaluate the applicable life safety requirements, examine the context in which they were derived, and determine a means by which the TS4550 modifications could be made within budget and on schedule, while still providing the occupants with appropriate levels of safety.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Satyapal, Sunita

The 2011 Annual Progress Report summarizes fiscal year 2011 activities and accomplishments by projects funded by the DOE Hydrogen Program. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing; technology validation; safety, codes and standards; education; market transformation; and systems analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

The 2013 Annual Progress Report summarizes fiscal year 2013 activities and accomplishments by projects funded by the DOE Hydrogen Program. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing; technology validation; safety, codes and standards; market transformation; and systems analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaSalle, F.R.; Golbeg, P.R.; Chenault, D.M.

For reactor and nuclear facilities, both Title 10, Code of Federal Regulations, Part 50, and US Department of Energy Order 6430.1A require assessments of the interaction of non-Safety Class 1 piping and equipment with Safety Class 1 piping and equipment during a seismic event to maintain the safety function. The safety class systems of nuclear reactors or nuclear facilities are designed to the applicable American Society of Mechanical Engineers standards and Seismic Category 1 criteria that require rigorous analysis, construction, and quality assurance. Because non-safety class systems are generally designed to lesser standards and seismic criteria, they may become missilesmore » during a safe shutdown earthquake. The resistance of piping, tubing, and equipment to seismically generated missiles is addressed in the paper. Gross plastic and local penetration failures are considered with applicable test verification. Missile types and seismic zones of influence are discussed. Field qualification data are also developed for missile evaluation.« less

Fundamental approaches for analysis thermal hydraulic parameter for Puspati Research Reactor

NASA Astrophysics Data System (ADS)

Hashim, Zaredah; Lanyau, Tonny Anak; Farid, Mohamad Fairus Abdul; Kassim, Mohammad Suhaimi; Azhar, Noraishah Syahirah

2016-01-01

The 1-MW PUSPATI Research Reactor (RTP) is the one and only nuclear pool type research reactor developed by General Atomic (GA) in Malaysia. It was installed at Malaysian Nuclear Agency and has reached the first criticality on 8 June 1982. Based on the initial core which comprised of 80 standard TRIGA fuel elements, the very fundamental thermal hydraulic model was investigated during steady state operation using the PARET-code. The main objective of this paper is to determine the variation of temperature profiles and Departure of Nucleate Boiling Ratio (DNBR) of RTP at full power operation. The second objective is to confirm that the values obtained from PARET-code are in agreement with Safety Analysis Report (SAR) for RTP. The code was employed for the hot and average channels in the core in order to calculate of fuel's center and surface, cladding, coolant temperatures as well as DNBR's values. In this study, it was found that the results obtained from the PARET-code showed that the thermal hydraulic parameters related to safety for initial core which was cooled by natural convection was in agreement with the designed values and safety limit in SAR.

The emergence of international food safety standards and guidelines: understanding the current landscape through a historical approach.

PubMed

Ramsingh, Brigit

2014-07-01

Following the Second World War, the Food and Agriculture Organization (FAO) and the World Health Organization (WHO) teamed up to construct an International Codex Alimentarius (or 'food code') which emerged in 1963. The Codex Committee on Food Hygiene (CCFH) was charged with the task of developing microbial hygiene standards, although it found itself embroiled in debate with the WHO over the nature these standards should take. The WHO was increasingly relying upon the input of biometricians and especially the International Commission on Microbial Specifications for Foods (ICMSF) which had developed statistical sampling plans for determining the microbial counts in the final end products. The CCFH, however, was initially more focused on a qualitative approach which looked at the entire food production system and developed codes of practice as well as more descriptive end-product specifications which the WHO argued were 'not scientifically correct'. Drawing upon historical archival material (correspondence and reports) from the WHO and FAO, this article examines this debate over microbial hygiene standards and suggests that there are many lessons from history which could shed light upon current debates and efforts in international food safety management systems and approaches.

Post-licensure rapid immunization safety monitoring program (PRISM) data characterization.

PubMed

Baker, Meghan A; Nguyen, Michael; Cole, David V; Lee, Grace M; Lieu, Tracy A

2013-12-30

The Post-Licensure Rapid Immunization Safety Monitoring (PRISM) program is the immunization safety monitoring component of FDA's Mini-Sentinel project, a program to actively monitor the safety of medical products using electronic health information. FDA sought to assess the surveillance capabilities of this large claims-based distributed database for vaccine safety surveillance by characterizing the underlying data. We characterized data available on vaccine exposures in PRISM, estimated how much additional data was gained by matching with select state and local immunization registries, and compared vaccination coverage estimates based on PRISM data with other available data sources. We generated rates of computerized codes representing potential health outcomes relevant to vaccine safety monitoring. Standardized algorithms including ICD-9 codes, number of codes required, exclusion criteria and location of the encounter were used to obtain the background rates. The majority of the vaccines routinely administered to infants, children, adolescents and adults were well captured by claims data. Immunization registry data in up to seven states comprised between 5% and 9% of data for all vaccine categories with the exception of 10% for hepatitis B and 3% and 4% for rotavirus and zoster respectively. Vaccination coverage estimates based on PRISM's computerized data were similar to but lower than coverage estimates from the National Immunization Survey and Healthcare Effectiveness Data and Information Set. For the 25 health outcomes of interest studied, the rates of potential outcomes based on ICD-9 codes were generally higher than rates described in the literature, which are typically clinically confirmed cases. PRISM program's data on vaccine exposures and health outcomes appear complete enough to support robust safety monitoring. Copyright © 2013 Elsevier Ltd. All rights reserved.

Analyses in Support of Risk-Informed Natural Gas Vehicle Maintenance Facility Codes and Standards: Phase II.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blaylock, Myra L.; LaFleur, Chris Bensdotter; Muna, Alice Baca

Safety standards development for maintenance facilities of liquid and compressed natural gas fueled vehicles is required to ensure proper facility design and operating procedures. Standard development organizations are utilizing risk-informed concepts to develop natural gas vehicle (NGV) codes and standards so that maintenance facilities meet acceptable risk levels. The present report summarizes Phase II work for existing NGV repair facility code requirements and highlights inconsistencies that need quantitative analysis into their effectiveness. A Hazardous and Operability study was performed to identify key scenarios of interest using risk ranking. Detailed simulations and modeling were performed to estimate the location and behaviormore » of natural gas releases based on these scenarios. Specific code conflicts were identified, and ineffective code requirements were highlighted and resolutions proposed. These include ventilation rate basis on area or volume, as well as a ceiling offset which seems ineffective at protecting against flammable gas concentrations. ACKNOWLEDGEMENTS The authors gratefully acknowledge Bill Houf (SNL -- Retired) for his assistance with the set-up and post-processing of the numerical simulations. The authors also acknowledge Doug Horne (retired) for his helpful discussions. We would also like to acknowledge the support from the Clean Cities program of DOE's Vehicle Technology Office.« less

NASA Requirements for Ground-Based Pressure Vessels and Pressurized Systems (PVS). Revision C

NASA Technical Reports Server (NTRS)

Greulich, Owen Rudolf

2017-01-01

The purpose of this document is to ensure the structural integrity of PVS through implementation of a minimum set of requirements for ground-based PVS in accordance with this document, NASA Policy Directive (NPD) 8710.5, NASA Safety Policy for Pressure Vessels and Pressurized Systems, NASA Procedural Requirements (NPR) 8715.3, NASA General Safety Program Requirements, applicable Federal Regulations, and national consensus codes and standards (NCS).

General Framework for Animal Food Safety Traceability Using GS1 and RFID

NASA Astrophysics Data System (ADS)

Cao, Weizhu; Zheng, Limin; Zhu, Hong; Wu, Ping

GS1 is global traceability standard, which is composed by the encoding system (EAN/UCC, EPC), the data carriers identified automatically (bar codes, RFID), electronic data interchange standards (EDI, XML). RFID is a non-contact, multi-objective automatic identification technique. Tracing of source food, standardization of RFID tags, sharing of dynamic data are problems to solve urgently for recent traceability systems. The paper designed general framework for animal food safety traceability using GS1 and RFID. This framework uses RFID tags encoding with EPCglobal tag data standards. Each information server has access tier, business tier and resource tier. These servers are heterogeneous and distributed, providing user access interfaces by SOAP or HTTP protocols. For sharing dynamic data, discovery service and object name service are used to locate dynamic distributed information servers.

Comparison of the LLNL ALE3D and AKTS Thermal Safety Computer Codes for Calculating Times to Explosion in ODTX and STEX Thermal Cookoff Experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wemhoff, A P; Burnham, A K

2006-04-05

Cross-comparison of the results of two computer codes for the same problem provides a mutual validation of their computational methods. This cross-validation exercise was performed for LLNL's ALE3D code and AKTS's Thermal Safety code, using the thermal ignition of HMX in two standard LLNL cookoff experiments: the One-Dimensional Time to Explosion (ODTX) test and the Scaled Thermal Explosion (STEX) test. The chemical kinetics model used in both codes was the extended Prout-Tompkins model, a relatively new addition to ALE3D. This model was applied using ALE3D's new pseudospecies feature. In addition, an advanced isoconversional kinetic approach was used in the AKTSmore » code. The mathematical constants in the Prout-Tompkins code were calibrated using DSC data from hermetically sealed vessels and the LLNL optimization code Kinetics05. The isoconversional kinetic parameters were optimized using the AKTS Thermokinetics code. We found that the Prout-Tompkins model calculations agree fairly well between the two codes, and the isoconversional kinetic model gives very similar results as the Prout-Tompkins model. We also found that an autocatalytic approach in the beta-delta phase transition model does affect the times to explosion for some conditions, especially STEX-like simulations at ramp rates above 100 C/hr, and further exploration of that effect is warranted.« less

77 FR 36984 - International Standard-Setting Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-20

... to Reduce Contamination of Food with Chemicals. Revised definition of Contaminant. To be considered... Code of Practice for Weed Control to Prevent and Reduce Pyrolizidine Alkaloid Contamination in Food and... DEPARTMENT OF AGRICULTURE Food Safety and Inspection Service [Docket No. FSIS-2012-0017...

46 CFR 154.1 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.1 Incorporation by reference... Equipment of Ships Carrying Liquefied Gases in Bulk, 1976 Code For Existing Ships Carrying Liquefied Gases...

46 CFR 154.1 - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.1 Incorporation by reference... Equipment of Ships Carrying Liquefied Gases in Bulk, 1976 Code For Existing Ships Carrying Liquefied Gases...

Safety Issues with Hydrogen as a Vehicle Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cadwallader, Lee Charles; Herring, James Stephen

1999-10-01

This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This reportmore » serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.« less

Safety Issues with Hydrogen as a Vehicle Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

L. C. Cadwallader; J. S. Herring

1999-09-01

This report is an initial effort to identify and evaluate safety issues associated with the use of hydrogen as a vehicle fuel in automobiles. Several forms of hydrogen have been considered: gas, liquid, slush, and hydrides. The safety issues have been discussed, beginning with properties of hydrogen and the phenomenology of hydrogen combustion. Safety-related operating experiences with hydrogen vehicles have been summarized to identify concerns that must be addressed in future design activities and to support probabilistic risk assessment. Also, applicable codes, standards, and regulations pertaining to hydrogen usage and refueling have been identified and are briefly discussed. This reportmore » serves as a safety foundation for any future hydrogen safety work, such as a safety analysis or a probabilistic risk assessment.« less

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation. Functional modules F1--F8 -- Volume 2, Part 1, Revision 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greene, N.M.; Petrie, L.M.; Westfall, R.M.

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automate the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system hasmore » been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.2 of the system. The manual is divided into three volumes: Volume 1--for the control module documentation; Volume 2--for functional module documentation; and Volume 3--for documentation of the data libraries and subroutine libraries.« less

Development of an integrated thermal-hydraulics capability incorporating RELAP5 and PANTHER neutronics code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Page, R.; Jones, J.R.

1997-07-01

Ensuring that safety analysis needs are met in the future is likely to lead to the development of new codes and the further development of existing codes. It is therefore advantageous to define standards for data interfaces and to develop software interfacing techniques which can readily accommodate changes when they are made. Defining interface standards is beneficial but is necessarily restricted in application if future requirements are not known in detail. Code interfacing methods are of particular relevance with the move towards automatic grid frequency response operation where the integration of plant dynamic, core follow and fault study calculation toolsmore » is considered advantageous. This paper describes the background and features of a new code TALINK (Transient Analysis code LINKage program) used to provide a flexible interface to link the RELAP5 thermal hydraulics code with the PANTHER neutron kinetics and the SIBDYM whole plant dynamic modelling codes used by Nuclear Electric. The complete package enables the codes to be executed in parallel and provides an integrated whole plant thermal-hydraulics and neutron kinetics model. In addition the paper discusses the capabilities and pedigree of the component codes used to form the integrated transient analysis package and the details of the calculation of a postulated Sizewell `B` Loss of offsite power fault transient.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.

This report acquaints stakeholders and interested parties involved in the development and/or deployment of energy storage systems (ESS) with the subject of safety-related codes, standards and regulations (CSRs). It is hoped that users of this document gain a more in depth and uniform understanding of safety-related CSR development and deployment that can foster improved communications among all ESS stakeholders and the collaboration needed to realize more timely acceptance and approval of safe ESS technology through appropriate CSR.

Using narrative text and coded data to develop hazard scenarios for occupational injury interventions

PubMed Central

Lincoln, A; Sorock, G; Courtney, T; Wellman, H; Smith, G; Amoroso, P

2004-01-01

Objective: To determine whether narrative text in safety reports contains sufficient information regarding contributing factors and precipitating mechanisms to prioritize occupational back injury prevention strategies. Design, setting, subjects, and main outcome measures: Nine essential data elements were identified in narratives and coded sections of safety reports for each of 94 cases of back injuries to United States Army truck drivers reported to the United States Army Safety Center between 1987 and 1997. The essential elements of each case were used to reconstruct standardized event sequences. A taxonomy of the event sequences was then developed to identify common hazard scenarios and opportunities for primary interventions. Results: Coded data typically only identified five data elements (broad activity, task, event/exposure, nature of injury, and outcomes) while narratives provided additional elements (contributing factor, precipitating mechanism, primary source) essential for developing our taxonomy. Three hazard scenarios were associated with back injuries among Army truck drivers accounting for 83% of cases: struck by/against events during motor vehicle crashes; falls resulting from slips/trips or loss of balance; and overexertion from lifting activities. Conclusions: Coded data from safety investigations lacked sufficient information to thoroughly characterize the injury event. However, the combination of existing narrative text (similar to that collected by many injury surveillance systems) and coded data enabled us to develop a more complete taxonomy of injury event characteristics and identify common hazard scenarios. This study demonstrates that narrative text can provide the additional information on contributing factors and precipitating mechanisms needed to target prevention strategies. PMID:15314055

[Standardization of hospital feeding].

PubMed

Caracuel García, Ángel Manuel

2015-05-07

Normalization can be understood as the establishing measures against repetitive situations through the development, dissemination, and application of technical design documents called standards. In Andalusia there are 45 public hospitals with 14,606 beds, and in which 11,700 full pensions / day are served. The Working Group on Hospital Food Standardization of the Andalusian Society for Clinical Nutrition and Dietetics, started in 2010, working on the certification of suppliers, product specifications, and meals technical card. - Develop a specific tool to help improving food safety through the certification of their suppliers. - Develop a standardized technical specifications of foodstuffs necessary for the development of menus established codes diets Andalusian hospitals document. - Develop a catalog of data sheets plates of hospital meals, to homogenize menus, respecting local and unifying criteria for qualitative and quantitative ingredients. - Providing documentation and studying of several public hospitals in Andalusia: • Product specifications and certification of suppliers. • International standards certification and distribution companies. • Legislation. • Data sheets for the menu items. • Specifications of different product procurement procedures. - Development of the draft standard HOSPIFOOD®, and approval of the version “0.0”. - Training course for auditors to this standard. - Development of a raw materials catalog as technical cards. - Meals Technical cards review and election of the ones which will be part of the document. After nearly three years of work, we have achieved the following products: - Standardized database of technical specifications for the production of food dietary codes for: fish, seafood, meat and meat products, meats and pates, ready meals, bread and pastries, preserves, milk and dairy products, oils, cereals, legumes , vegetables, fruits, fresh and frozen vegetables, condiments and spices. - Standardized database of technical cards for meals containing the following data: SAS Code, Province, Hospital, name plate, ingredients (g), edible ingredients (g) kcal, Proteins, HC, Fat and Fiber. - HOSPIFOOD® standard certification for food providers in hospitals, school cafeterias and other institutions of social restoration. Patients expect food that is offered during the stay in the hospital, meet basic standards of quality and safety, and therefore it is necessary to design and develop control systems from the award and / or acquisition of food (raw materials and finished) products which subsequently become part of the menu that is offered as part of their treatment. To avoid the effect of fraudulent practice in public health, it’s needed to ensure the quality and safety of the food from the origin and establish the standards for acquisition and subsequent use of it.

Complying with the Occupational Safety and Health Administration: guidelines for the dental office.

PubMed

Boyce, Ricardo; Mull, Justin

2008-07-01

This article outlines Occupational Safety and Health Administration (OSHA) guidelines for maintaining a safe dental practice workplace and covers requirements, such as education and protection for dental health care personnel. OSHA regulations aim to reduce exposure to blood-borne pathogens. Environmental infection control in dental offices and operatories is the goal of enforcement of OSHA codes of practice. Universal precautions reduce the risk for infectious disease. OSHA has a mandate to protect workers in the United States from potential workplace injuries. OSHA standards are available through online and print publications and owners of dental practices must meet OSHA standards for the workplace.

Reformation of Regulatory Technical Standards for Nuclear Power Generation Equipments in Japan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mikio Kurihara; Masahiro Aoki; Yu Maruyama

2006-07-01

Comprehensive reformation of the regulatory system has been introduced in Japan in order to apply recent technical progress in a timely manner. 'The Technical Standards for Nuclear Power Generation Equipments', known as the Ordinance No.622) of the Ministry of International Trade and Industry, which is used for detailed design, construction and operating stage of Nuclear Power Plants, was being modified to performance specifications with the consensus codes and standards being used as prescriptive specifications, in order to facilitate prompt review of the Ordinance with response to technological innovation. The activities on modification were performed by the Nuclear and Industrial Safetymore » Agency (NISA), the regulatory body in Japan, with support of the Japan Nuclear Energy Safety Organization (JNES), a technical support organization. The revised Ordinance No.62 was issued on July 1, 2005 and is enforced from January 1 2006. During the period from the issuance to the enforcement, JNES carried out to prepare enforceable regulatory guide which complies with each provisions of the Ordinance No.62, and also made technical assessment to endorse the applicability of consensus codes and standards, in response to NISA's request. Some consensus codes and standards were re-assessed since they were already used in regulatory review of the construction plan submitted by licensee. Other consensus codes and standards were newly assessed for endorsement. In case that proper consensus code or standards were not prepared, details of regulatory requirements were described in the regulatory guide as immediate measures. At the same time, appropriate standards developing bodies were requested to prepare those consensus code or standards. Supplementary note which provides background information on the modification, applicable examples etc. was prepared for convenience to the users of the Ordinance No. 62. This paper shows the activities on modification and the results, following the NISA's presentation at ICONE-13 that introduced the framework of the performance specifications and the modification process of the Ordinance NO. 62. (authors)« less

Items Supporting the Hanford Internal Dosimetry Program Implementation of the IMBA Computer Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carbaugh, Eugene H.; Bihl, Donald E.

2008-01-07

The Hanford Internal Dosimetry Program has adopted the computer code IMBA (Integrated Modules for Bioassay Analysis) as its primary code for bioassay data evaluation and dose assessment using methodologies of ICRP Publications 60, 66, 67, 68, and 78. The adoption of this code was part of the implementation plan for the June 8, 2007 amendments to 10 CFR 835. This information release includes action items unique to IMBA that were required by PNNL quality assurance standards for implementation of safety software. Copie of the IMBA software verification test plan and the outline of the briefing given to new users aremore » also included.« less

Building codes: An often overlooked determinant of health.

PubMed

Chauvin, James; Pauls, Jake; Strobl, Linda

2016-05-01

Although the vast majority of the world's population spends most of their time in buildings, building codes are not often thought of as 'determinants of health'. The standards that govern the design, construction, and use of buildings affect our health, security, safety, and well-being. This is true for dwellings, schools, and universities, shopping centers, places of recreation, places of worship, health-care facilities, and workplaces. We urge proactive engagement by the global public health community in developing these codes, and in the design and implementation of health protection and health promotion activities intended to reduce the risk of injury, disability, and death, particularly when due to poor building code adoption/adaption, application, and enforcement.

2009 Annual Progress Report: DOE Hydrogen Program, November 2009 (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2009-11-01

This report summarizes the hydrogen and fuel cell R&D activities and accomplishments of the DOE Hydrogen Program for FY2009. It covers the program areas of hydrogen production and delivery; fuel cells; manufacturing; technology validation; safety, codes and standards; education; and systems analysis.

DOE Hydrogen Program 2004 Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This document summarizes the project evaluations and comments from the DOE Hydrogen Program 2004 Annual Program Review. Hydrogen production, delivery and storage; fuel cells; technology validation; safety, codes and standards; and education R&D projects funded by DOE in FY2004 are reviewed.

Assessment of the Draft AIAA S-119 Flight Dynamic Model Exchange Standard

NASA Technical Reports Server (NTRS)

Jackson, E. Bruce; Murri, Daniel G.; Hill, Melissa A.; Jessick, Matthew V.; Penn, John M.; Hasan, David A.; Crues, Edwin Z.; Falck, Robert D.; McCarthy, Thomas G.; Vuong, Nghia;

Technology Solutions Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The country’s first Zero Energy Ready manufactured home that is certified by the U.S. Department of Energy (DOE) is up and running in Russellville, Alabama. The manufactured home was built by a partnership between Southern Energy Homes and the Advanced Residential Integrated Energy Solutions Collaborative (ARIES), which is a DOE Building America team. The effort was part of a three-home study including a standard-code manufactured home and an ENERGY STAR® manufactured home. Cooling-season results showed that the building used half the space-conditioning energy of a manufactured home built to the U.S. Department of Housing and Urban Development’s (HUD’s) Manufactured Homemore » Construction and Safety Standards. These standards are known collectively as the HUD Code, which is the building standard for all U.S. manufactured housing.« less

29 CFR 1910.119 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... complexity of the process will influence the decision as to the appropriate PHA methodology to use. All PHA... process hazard analysis in sufficient detail to support the analysis. (3) Information pertaining to the...) Relief system design and design basis; (E) Ventilation system design; (F) Design codes and standards...

29 CFR 1910.119 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... complexity of the process will influence the decision as to the appropriate PHA methodology to use. All PHA... process hazard analysis in sufficient detail to support the analysis. (3) Information pertaining to the...) Relief system design and design basis; (E) Ventilation system design; (F) Design codes and standards...

76 FR 60714 - Revision of Class E Airspace; Northway, AK

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

... Northway, AK, to accommodate the amendment of one Standard Instrument Approach Procedure at the Northway Airport. The FAA is taking this action to enhance safety and management of Instrument Flight Rules (IFR... incorporation by reference action under title 1, Code of Federal Regulations, part 51, subject to the annual...

2014 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2014-11-01

The 2014 Annual Progress Report summarizes fiscal year 2014 activities and accomplishments by projects funded by the DOE Hydrogen Program. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing; technology validation; safety, codes and standards; market transformation; and systems analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This report summarizes comments from the Peer Review Panel at the 2013 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on May 13-17, 2013, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; market transformation; and systems analysis.

Eighteen years of recommendations to prevent industrial chemical incidents: results and lessons learned of the US Chemical Safety Board.

PubMed

Tinney, V A; Anenberg, S C; Kaszniak, M; Robinson, B

2016-10-01

The US Chemical Safety Board (CSB), a federal agency that investigates significant chemical incidents and hazards, is interested in determining the impact of the recommendations resulting from its investigations, and how to better more effective recommendations to prevent chemical incidents. This is a descriptive study of the US Chemical Safety Board's safety recommendations. The CSB coded and analysed its safety recommendations according to potential impact on reducing incidents, implementation status, purpose and recipient type. As of March 31, 2015, the CSB has issued 733 recommendations, 75% (548) of which are closed and 25% (185) of which remain open. For recommendations categorised as having high, medium, and low impact, 38% (78), 76% (160), and 78% (245) were implemented, respectively. CSB recommendations have led to important and lasting safety changes through regulations, industry guidance and voluntary consensus standards, and individual companies; however, coding recommendations by potential impact do not fully capture the influence of CSB recommendations. While this methodology serves as a preliminary way to determine the effect of recommendations, further data are needed to determine the extent to which these safety changes have reduced the frequency or severity of industrial accidents. Copyright © 2016 The Royal Society for Public Health. All rights reserved.

Globalization of ASME Nuclear Codes and Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swayne, Rick; Erler, Bryan A.

2006-07-01

With the globalization of the nuclear industry, it is clear that the reactor suppliers are based in many countries around the world (such as United States, France, Japan, Canada, South Korea, South Africa) and they will be marketing their reactors to many countries around the world (such as US, China, South Korea, France, Canada, Finland, Taiwan). They will also be fabricating their components in many different countries around the world. With this situation, it is clear that the requirements of ASME Nuclear Codes and Standards need to be adjusted to accommodate the regulations, fabricating processes, and technology of various countriesmore » around the world. It is also very important for the American Society of Mechanical Engineers (ASME) to be able to assure that products meeting the applicable ASME Code requirements will provide the same level of safety and quality assurance as those products currently fabricated under the ASME accreditation process. To do this, many countries are in the process of establishing or changing their regulations, and it is important for ASME to interface with the appropriate organizations in those countries, in order to ensure there is effective use of ASME Codes and standards around the world. (authors)« less

Physician involvement enhances coding accuracy to ensure national standards: an initiative to improve awareness among new junior trainees.

PubMed

Nallasivan, S; Gillott, T; Kamath, S; Blow, L; Goddard, V

2011-06-01

Record Keeping Standards is a development led by the Royal College of Physicians of London (RCP) Health Informatics Unit and funded by the National Health Service (NHS) Connecting for Health. A supplementary report produced by the RCP makes a number of recommendations based on a study held at an acute hospital trust. We audited the medical notes and coding to assess the accuracy, documentation by the junior doctors and also to correlate our findings with the RCP audit. Northern Lincolnshire & Goole Hospitals NHS Foundation Trust has 114,000 'finished consultant episodes' per year. A total of 100 consecutive medical (50) and rheumatology (50) discharges from Diana Princess of Wales Hospital from August-October 2009 were reviewed. The results showed an improvement in coding accuracy (10% errors), comparable to the RCP audit but with 5% documentation errors. Physician involvement needs enhancing to improve the effectiveness and to ensure clinical safety.

Fire safety design of a mobile quarantine facility

NASA Technical Reports Server (NTRS)

Bass, R. S.; Hirasaki, J. K.

1971-01-01

During the design phase of the Mobile Quarantine Facility (MQF), a primary consideration was fire safety. Therefore, appropriate criteria and ground rules were used in the design and construction of the facility. The fire codes and fire-requirement listings that are used by commerical airlines were supplied to the Manned Spacecraft Center (MSC) by the Federal Aviation Agency (FAA). After these codes were reviewed, a basic ground rule was adopted that flame protection for all combustible materials should be at least equivalent to or better than the standards for commercial aircraft. Because the MQF was designed to operate with an interior atmosphere of air rather than with an oxygen-enriched atmosphere such as that of the Apollo spacecraft cabin, the requirements for MQF material were not as stringent as those for the spacecraft.

38 CFR 61.20 - Life Safety Code capital grants.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2011-07-01 2011-07-01 false Life Safety Code capital... (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.20 Life Safety Code capital grants. (a) This section sets forth provisions for obtaining a Life Safety Code capital grant under 38 U.S.C. 2012...

38 CFR 61.20 - Life Safety Code capital grants.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Life Safety Code capital... (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.20 Life Safety Code capital grants. (a) This section sets forth provisions for obtaining a Life Safety Code capital grant under 38 U.S.C. 2012...

38 CFR 61.20 - Life Safety Code capital grants.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2012-07-01 2012-07-01 false Life Safety Code capital... (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.20 Life Safety Code capital grants. (a) This section sets forth provisions for obtaining a Life Safety Code capital grant under 38 U.S.C. 2012...

77 FR 52393 - Petition for Exemption From the Vehicle Theft Prevention Standard; BMW of North America, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... International Policy, Fuel Economy and Consumer Programs, National Highway Traffic Safety Administration, 1200... key, powered by a battery and consists of a transmitter/receiver which communicates with the EWS... and starter. The ignition and fuel supply are only released when a correct coded release signal has...

49 CFR 192.189 - Vaults: Drainage and waterproofing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Design of Pipeline Components § 192.189 Vaults: Drainage and waterproofing. (a) Each vault must be designed so as to minimize... applicable requirements of Class 1, Group D, of the National Electrical Code, ANSI/NFPA 70. [35 FR 13257, Aug...

77 FR 14438 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... the Code of Federal Regulations (30 CFR), part 44 govern the application, processing, and disposition.... Regulation Affected: 30 CFR 75.1200(d) & (i) Mine map). Modification Request: The petitioner requests a... affected area. The petitioner asserts that the proposed alternative method will provide no less than the...

3 CFR 8967 - Proclamation 8967 of April 30, 2013. National Building Safety Month, 2013

Code of Federal Regulations, 2014 CFR

2014-01-01

... States of America A Proclamation When natural disasters and other hazards put American lives at risk... redevelopment. To get involved, visit www.Ready.gov. Time and again, devastating natural disasters have tested... stakeholders across our country to adopt disaster-resistant building codes and standards. We are collaborating...

2008 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2008-06-13

This report summarizes comments from the Peer Review Panel at the 2008 DOE Hydrogen Program Annual Merit Review, held on June 9-13, 2008, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; technology validation; safety, codes, and standards; education; systems analysis; and manufacturing.

2015 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The 2015 Annual Progress Report summarizes fiscal year 2015 activities and accomplishments by projects funded by the DOE Hydrogen and Fuel Cells Program. It covers the program areas of hydrogen production; hydrogen delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes and standards; systems analysis; and market transformation.

77 FR 6171 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-07

...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 of the Code of Federal... request for a waiver of compliance from certain requirements of its safety standards. In a letter dated... permanent waiver of compliance for one switching locomotive (HVRM 11) from the requirements of 49 CFR part...

TRIAD IV: Nationwide Survey of Medical Students' Understanding of Living Wills and DNR Orders.

PubMed

Mirarchi, Ferdinando L; Ray, Matthew; Cooney, Timothy

2016-12-01

Living wills are a form of advance directives that help to protect patient autonomy. They are frequently encountered in the conduct of medicine. Because of their impact on care, it is important to understand the adequacy of current medical school training in the preparation of physicians to interpret these directives. Between April and August 2011 of third and fourth year medical students participated in an internet survey involving the interpretation of living wills. The survey presented a standard living will as a "stand-alone," a standard living will with the addition an emergent clinical scenario and then variations of the standard living will that included a code status designation ("DNR," "Full Code," or "Comfort Care"). For each version/ scenario, respondents were asked to assign a code status and choose interventions based on the cases presented. Four hundred twenty-five students from medical schools throughout the country responded. The majority indicated they had received some form of advance directive training and understood the concept of code status and the term "DNR." Based on a stand-alone document, 15% of respondents correctly denoted "full code" as the appropriate code status; adding a clinical scenario yielded negligible improvement. When a code designation was added to the living will, correct code status responses ranged from 68% to 93%, whereas correct treatment decisions ranged from 18% to 78%. Previous training in advance directives had no impact on these results. Our data indicate that the majority of students failed to understand the key elements of a living will; adding a code status designations improved correct responses with the exception of the term DNR. Misunderstanding of advance directives is a nationwide problem and jeopardizes patient safety. Medical School ethics curricula need to be improved to ensure competency with respect to understanding advance directives.

Guidelines for pressure vessel safety assessment

NASA Astrophysics Data System (ADS)

Yukawa, S.

1990-04-01

A technical overview and information on metallic pressure containment vessels and tanks is given. The intent is to provide Occupational Safety and Health Administration (OSHA) personnel and other persons with information to assist in the evaluation of the safety of operating pressure vessels and low pressure storage tanks. The scope is limited to general industrial application vessels and tanks constructed of carbon or low alloy steels and used at temperatures between -75 and 315 C (-100 and 600 F). Information on design codes, materials, fabrication processes, inspection and testing applicable to the vessels and tanks are presented. The majority of the vessels and tanks are made to the rules and requirements of ASME Code Section VIII or API Standard 620. The causes of deterioration and damage in operation are described and methods and capabilities of detecting serious damage and cracking are discussed. Guidelines and recommendations formulated by various groups to inspect for the damages being found and to mitigate the causes and effects of the problems are presented.

Master list and index to NASA directives

NASA Technical Reports Server (NTRS)

1984-01-01

All NASA management directives in force as of August 1, 1984 are listed by major subject headings showing number, effective date, title, responsible office, and distribution code. Delegations of authority in print by that date are listed numerically as well as by the installation or office to which special authority is assigned. Other consolidated lists show all management handbooks, directives applicable to the Jet Propulsion Laboratory, directives published in the Code of Federal Regulations, complementary manuals, and NASA safety standards. Distribution policies and instructions for ordering directives are included.

Master list and index to NASA directives

NASA Technical Reports Server (NTRS)

1982-01-01

All NASA management directives in force as of August 1, 1982 are listed by major subject headings showing number, effective data, title, responsible office, and distribution code. Delegations of authority in print by that date are listed numerically as well as by the installation or office to which special authority is assigned. Other consolidated lists show all management handbooks, directives applicable to the Jet Propulsion Laboratory, directions published in the Code of Federal Regulations, complementary manuals, and NASA safety standards. Distribution policies and instructions for ordering directives are included.

Use of disinfectants in open-air dairying.

PubMed

Hutchinson, R E

1995-06-01

Disinfection systems are essential in providing dairy foods which are safe for consumption by all sectors and age groups of the human population. The New Zealand dairy industry ensures quality competition under International Organisation for Standardisation (ISO) general systems standards (ISO 9002 and ISO Guide 25) and is subject to food safety assurance legislation (Dairy Industry Regulations 1990). This latter regulation requires that safe foods be produced in accordance with Product Safety Programmes approved by the Ministry of Agriculture and Fisheries. Safety can be demonstrated by compliance with the Codes of Practice of the industry. Farm dairy detergents and sanitisers must be approved for use. These disinfection systems are described.

Synthesizing Safety Conditions for Code Certification Using Meta-Level Programming

NASA Technical Reports Server (NTRS)

Eusterbrock, Jutta

2004-01-01

In code certification the code consumer publishes a safety policy and the code producer generates a proof that the produced code is in compliance with the published safety policy. In this paper, a novel viewpoint approach towards an implementational re-use oriented framework for code certification is taken. It adopts ingredients from Necula's approach for proof-carrying code, but in this work safety properties can be analyzed on a higher code level than assembly language instructions. It consists of three parts: (1) The specification language is extended to include generic pre-conditions that shall ensure safety at all states that can be reached during program execution. Actual safety requirements can be expressed by providing domain-specific definitions for the generic predicates which act as interface to the environment. (2) The Floyd-Hoare inductive assertion method is refined to obtain proof rules that allow the derivation of the proof obligations in terms of the generic safety predicates. (3) A meta-interpreter is designed and experimentally implemented that enables automatic synthesis of proof obligations for submitted programs by applying the modified Floyd-Hoare rules. The proof obligations have two separate conjuncts, one for functional correctness and another for the generic safety obligations. Proof of the generic obligations, having provided the actual safety definitions as context, ensures domain-specific safety of program execution in a particular environment and is simpler than full program verification.

Deriving exposure limits

NASA Astrophysics Data System (ADS)

Sliney, David H.

1990-07-01

Historically many different agencies and standards organizations have proposed laser occupational exposure limits (EL1s) or maximum permissible exposure (MPE) levels. Although some safety standards have been limited in scope to manufacturer system safety performance standards or to codes of practice most have included occupational EL''s. Initially in the 1960''s attention was drawn to setting EL''s however as greater experience accumulated in the use of lasers and some accident experience had been gained safety procedures were developed. It became clear by 1971 after the first decade of laser use that detailed hazard evaluation of each laser environment was too complex for most users and a scheme of hazard classification evolved. Today most countries follow a scheme of four major hazard classifications as defined in Document WS 825 of the International Electrotechnical Commission (IEC). The classifications and the associated accessible emission limits (AEL''s) were based upon the EL''s. The EL and AEL values today are in surprisingly good agreement worldwide. There exists a greater range of safety requirements for the user for each class of laser. The current MPE''s (i. e. EL''s) and their basis are highlighted in this presentation. 2. 0

Safety-related requirements for photovoltaic modules and arrays. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levins, A.

1984-03-01

Underwriters Laboratories has conducted a study to identify and develop safety requirements for photovoltaic module and panel designs and configurations for residential, intermediate, and large scale applications. Concepts for safety systems, where each system is a collection of subsystems which together address the total anticipated hazard situation, are described. Descriptions of hardware, and system usefulness and viability are included. This discussion of safety systems recognizes that there is little history on which to base the expected safety related performance of a photovoltaic system. A comparison of these systems, as against the provisions of the 1984 National Electrical Code covering photovoltaicmore » systems is made. A discussion of the UL investigation of the photovoltaic module evaluated to the provisions of the Proposed UL Standard for Flat-Plate Photovoltaic Modules and Panels is included. Grounding systems, their basis and nature, and the advantages and disadvantages of each are described. The meaning of frame grounding, circuit grounding, and the type of circuit ground are covered. The development of the Standard for Flat-Plate Photovoltaic Modules and Panels has continued, and with both industry comment and a product submittal and listing, the Standard has been refined to a viable document allowing an objective safety review of photovoltaic modules and panels. How this document, and other UL documents would cover investigations of certain other photovoltaic system components is described.« less

Evaluation of liquefaction potential for building code

NASA Astrophysics Data System (ADS)

Nunziata, C.; De Nisco, G.; Panza, G. F.

2008-07-01

The standard approach for the evaluation of the liquefaction susceptibility is based on the estimation of a safety factor between the cyclic shear resistance to liquefaction and the earthquake induced shear stress. Recently, an updated procedure based on shear-wave velocities (Vs) has been proposed which could be more easily applied. These methods have been applied at La Plaja beach of Catania, that experienced liquefaction because of the 1693 earthquake. The detailed geotechnical and Vs information and the realistic ground motion computed for the 1693 event let us compare the two approaches. The successful application of the Vs procedure, slightly modified to fit historical and safety factor information, even if additional field performances are needed, encourages the development of a guide for liquefaction potential analysis, based on well defined Vs profiles to be included in the italian seismic code.

Modeling Guidelines for Code Generation in the Railway Signaling Context

NASA Technical Reports Server (NTRS)

Ferrari, Alessio; Bacherini, Stefano; Fantechi, Alessandro; Zingoni, Niccolo

2009-01-01

Modeling guidelines constitute one of the fundamental cornerstones for Model Based Development. Their relevance is essential when dealing with code generation in the safety-critical domain. This article presents the experience of a railway signaling systems manufacturer on this issue. Introduction of Model-Based Development (MBD) and code generation in the industrial safety-critical sector created a crucial paradigm shift in the development process of dependable systems. While traditional software development focuses on the code, with MBD practices the focus shifts to model abstractions. The change has fundamental implications for safety-critical systems, which still need to guarantee a high degree of confidence also at code level. Usage of the Simulink/Stateflow platform for modeling, which is a de facto standard in control software development, does not ensure by itself production of high-quality dependable code. This issue has been addressed by companies through the definition of modeling rules imposing restrictions on the usage of design tools components, in order to enable production of qualified code. The MAAB Control Algorithm Modeling Guidelines (MathWorks Automotive Advisory Board)[3] is a well established set of publicly available rules for modeling with Simulink/Stateflow. This set of recommendations has been developed by a group of OEMs and suppliers of the automotive sector with the objective of enforcing and easing the usage of the MathWorks tools within the automotive industry. The guidelines have been published in 2001 and afterwords revisited in 2007 in order to integrate some additional rules developed by the Japanese division of MAAB [5]. The scope of the current edition of the guidelines ranges from model maintainability and readability to code generation issues. The rules are conceived as a reference baseline and therefore they need to be tailored to comply with the characteristics of each industrial context. Customization of these recommendations has been performed for the automotive control systems domain in order to enforce code generation [7]. The MAAB guidelines have been found profitable also in the aerospace/avionics sector [1] and they have been adopted by the MathWorks Aerospace Leadership Council (MALC). General Electric Transportation Systems (GETS) is a well known railway signaling systems manufacturer leading in Automatic Train Protection (ATP) systems technology. Inside an effort of adopting formal methods within its own development process, GETS decided to introduce system modeling by means of the MathWorks tools [2], and in 2008 chose to move to code generation. This article reports the experience performed by GETS in developing its own modeling standard through customizing the MAAB rules for the railway signaling domain and shows the result of this experience with a successful product development story.

Experimental optimization of the FireFly 600 photovoltaic off-grid system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyson, William Earl; Orozco, Ron; Ralph, Mark E.

2003-10-01

A comprehensive evaluation and experimental optimization of the FireFly{trademark} 600 off-grid photovoltaic system manufactured by Energia Total, Ltd. was conducted at Sandia National Laboratories in May and June of 2001. This evaluation was conducted at the request of the manufacturer and addressed performance of individual system components, overall system functionality and performance, safety concerns, and compliance with applicable codes and standards. A primary goal of the effort was to identify areas for improvement in performance, reliability, and safety. New system test procedures were developed during the effort.

Safety, Codes, and Standards | Hydrogen and Fuel Cells | NREL

Science.gov Websites

to develop and test hydrogen sensor technologies. In addition to partnering with organizations in the and Validation of Prototype Hydrogen Sensors, P.K. Sekhar, J. Zhou, M.B. Post, L. Woo, W.J. Buttner , M.B. Post, C. Rivkin, R. Burgess, and W.J. Buttner, International Journal of Hydrogen Energy (March

2016 Annual Progress Report: DOE Hydrogen and Fuel Cells Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The 2016 Annual Progress Report summarizes fiscal year 2016 activities and accomplishments by projects funded by the DOE Hydrogen and Fuel Cells Program. It covers the program areas of hydrogen production; hydrogen delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes and standards; systems analysis; market transformation; and Small Business Innovation Research projects.

2010 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This report summarizes comments from the Peer Review Panel at the 2010 DOE Hydrogen Program Annual Merit Review, held on June 7-11, 2010, in Washington, DC. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; education; and systems analysis.

46 CFR 154.19 - U.S. flag vessel: IMO certificate issuance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Section 154.19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.19 U.S... part; and (2) It is a new gas vessel, it meets the IMO Resolution A.328(IX), “Code for the Construction...

46 CFR 154.19 - U.S. flag vessel: IMO certificate issuance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Section 154.19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.19 U.S... part; and (2) It is a new gas vessel, it meets the IMO Resolution A.328(IX), “Code for the Construction...

46 CFR 154.19 - U.S. flag vessel: IMO certificate issuance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Section 154.19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.19 U.S... part; and (2) It is a new gas vessel, it meets the IMO Resolution A.328(IX), “Code for the Construction...

46 CFR 154.19 - U.S. flag vessel: IMO certificate issuance.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Section 154.19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.19 U.S... part; and (2) It is a new gas vessel, it meets the IMO Resolution A.328(IX), “Code for the Construction...

46 CFR 154.19 - U.S. flag vessel: IMO certificate issuance.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 154.19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.19 U.S... part; and (2) It is a new gas vessel, it meets the IMO Resolution A.328(IX), “Code for the Construction...

Natural Language Interface for Safety Certification of Safety-Critical Software

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd

2011-01-01

Model-based design and automated code generation are being used increasingly at NASA. The trend is to move beyond simulation and prototyping to actual flight code, particularly in the guidance, navigation, and control domain. However, there are substantial obstacles to more widespread adoption of code generators in such safety-critical domains. Since code generators are typically not qualified, there is no guarantee that their output is correct, and consequently the generated code still needs to be fully tested and certified. The AutoCert generator plug-in supports the certification of automatically generated code by formally verifying that the generated code is free of different safety violations, by constructing an independently verifiable certificate, and by explaining its analysis in a textual form suitable for code reviews.

29 CFR 1915.90 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Safety color code for marking physical hazards. 1915.90 Section 1915.90 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... General Working Conditions § 1915.90 Safety color code for marking physical hazards. The requirements...

29 CFR 1915.90 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Safety color code for marking physical hazards. 1915.90 Section 1915.90 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... General Working Conditions § 1915.90 Safety color code for marking physical hazards. The requirements...

29 CFR 1915.90 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Safety color code for marking physical hazards. 1915.90 Section 1915.90 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... General Working Conditions § 1915.90 Safety color code for marking physical hazards. The requirements...

76 FR 77549 - Colorado River Indian Tribes-Amendment to Health & Safety Code, Article 2. Liquor

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

... Health & Safety Code, Article 2. Liquor AGENCY: Bureau of Indian Affairs, Interior. ACTION: Notice. SUMMARY: This notice publishes the amendment to the Colorado River Tribal Health and Safety Code, Article... Code, Article 2, Liquor by Ordinance No. 10-03 on December 13, 2010. This notice is published in...

SAFETY IN THE DESIGN OF SCIENCE LABORATORIES AND BUILDING CODES.

ERIC Educational Resources Information Center

HOROWITZ, HAROLD

THE DESIGN OF COLLEGE AND UNIVERSITY BUILDINGS USED FOR SCIENTIFIC RESEARCH AND EDUCATION IS DISCUSSED IN TERMS OF LABORATORY SAFETY AND BUILDING CODES AND REGULATIONS. MAJOR TOPIC AREAS ARE--(1) SAFETY RELATED DESIGN FEATURES OF SCIENCE LABORATORIES, (2) LABORATORY SAFETY AND BUILDING CODES, AND (3) EVIDENCE OF UNSAFE DESIGN. EXAMPLES EMPHASIZE…

Highway Safety Program Manual: Volume 6: Codes and Laws.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 6 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred safety practices) concentrates on codes and laws. The purpose and specific objectives of the Codes and Laws Program, Federal authority in the area of highway safety, and policies regarding traffic regulation are described.…

A review of nondestructive examination technology for polyethylene pipe in nuclear power plant

NASA Astrophysics Data System (ADS)

Zheng, Jinyang; Zhang, Yue; Hou, Dongsheng; Qin, Yinkang; Guo, Weican; Zhang, Chuck; Shi, Jianfeng

2018-05-01

Polyethylene (PE) pipe, particularly high-density polyethylene (HDPE) pipe, has been successfully utilized to transport cooling water for both non-safety- and safety-related applications in nuclear power plant (NPP). Though ASME Code Case N755, which is the first code case related to NPP HDPE pipe, requires a thorough nondestructive examination (NDE) of HDPE joints. However, no executable regulations presently exist because of the lack of a feasible NDE technique for HDPE pipe in NPP. This work presents a review of current developments in NDE technology for both HDPE pipe in NPP with a diameter of less than 400 mm and that of a larger size. For the former category, phased array ultrasonic technique is proven effective for inspecting typical defects in HDPE pipe, and is thus used in Chinese national standards GB/T 29460 and GB/T 29461. A defect-recognition technique is developed based on pattern recognition, and a safety assessment principle is summarized from the database of destructive testing. On the other hand, recent research and practical studies reveal that in current ultrasonic-inspection technology, the absence of effective ultrasonic inspection for large size was lack of consideration of the viscoelasticity effect of PE on acoustic wave propagation in current ultrasonic inspection technology. Furthermore, main technical problems were analyzed in the paper to achieve an effective ultrasonic test method in accordance to the safety and efficiency requirements of related regulations and standards. Finally, the development trend and challenges of NDE test technology for HDPE in NPP are discussed.

Immunization safety in US print media, 1995-2005.

PubMed

Hussain, Hamidah; Omer, Saad B; Manganello, Jennifer A; Kromm, Elizabeth Edsall; Carter, Terrell C; Kan, Lilly; Stokley, Shannon; Halsey, Neal A; Salmon, Daniel A

2011-05-01

To identify and describe vaccine safety in US newspaper articles. Articles (1147) from 44 states and Washington, DC, between January 1, 1995, and July 15, 2005, were identified by using the search terms "immunize or vaccine" and "adverse events or safety or exemption or danger or risk or damage or injury or side effect" and were coded by using a standardized data-collection instrument. The mean number of vaccine-safety articles per state was 26. Six (not mutually exclusive) topics were identified: vaccine-safety concerns (46%); vaccine policy (44%); vaccines are safe (20%); immunizations are required (10%); immunizations are not required (8%); and state/school exemption (8%). Three spikes in the number of newspaper articles about vaccine-safety issues were observed: in 1999 regarding rotavirus vaccine and in 2002 and 2003 regarding smallpox vaccine. Excluding articles that referred to rotavirus and smallpox vaccines, 37% of the articles had a negative take-home message. Ongoing monitoring of news on vaccine safety may help the content and framing of vaccine-safety messages.

The three Rs of fire safety, emergency action, and fire prevention planning: promoting safety at the worksite.

PubMed

Thompson, Marcella R

2003-04-01

Fire safety is of paramount importance for everyone. In many workplaces, the occupational health nurse's scope of practice encompasses safety related activities. Included within this role is the responsibility for fire safety, emergency action, and fire prevention planning. The Three Rs of fire safety, emergency action, and fire prevention plans are rules, responsibilities, and resources. Myriad building and fire safety codes, regulations, and standards exist with which an employer must comply. An employer's responsibility for installing, testing, inspecting, and maintaining fire safety related equipment is extensive. Emergency action and fire prevention planning begins with conducting a detailed physical survey and preparing site maps. It includes making key policy decisions, writing procedures, and training employees in those procedures by practicing and executing site drills. The best resources available for emergency planning are the local fire department and the property insurer. Planning ahead means an efficient emergency response if disaster strikes. It saves lives, limits property damage, and preserves the environment.

High Temperature Gas Reactors: Assessment of Applicable Codes and Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDowell, Bruce K.; Nickolaus, James R.; Mitchell, Mark R.

2011-10-31

Current interest expressed by industry in HTGR plants, particularly modular plants with power up to about 600 MW(e) per unit, has prompted NRC to task PNNL with assessing the currently available literature related to codes and standards applicable to HTGR plants, the operating history of past and present HTGR plants, and with evaluating the proposed designs of RPV and associated piping for future plants. Considering these topics in the order they are arranged in the text, first the operational histories of five shut-down and two currently operating HTGR plants are reviewed, leading the authors to conclude that while small, simplemore » prototype HTGR plants operated reliably, some of the larger plants, particularly Fort St. Vrain, had poor availability. Safety and radiological performance of these plants has been considerably better than LWR plants. Petroleum processing plants provide some applicable experience with materials similar to those proposed for HTGR piping and vessels. At least one currently operating plant - HTR-10 - has performed and documented a leak before break analysis that appears to be applicable to proposed future US HTGR designs. Current codes and standards cover some HTGR materials, but not all materials are covered to the high temperatures envisioned for HTGR use. Codes and standards, particularly ASME Codes, are under development for proposed future US HTGR designs. A 'roadmap' document has been prepared for ASME Code development; a new subsection to section III of the ASME Code, ASME BPVC III-5, is scheduled to be published in October 2011. The question of terminology for the cross-duct structure between the RPV and power conversion vessel is discussed, considering the differences in regulatory requirements that apply depending on whether this structure is designated as a 'vessel' or as a 'pipe'. We conclude that designing this component as a 'pipe' is the more appropriate choice, but that the ASME BPVC allows the owner of the facility to select the preferred designation, and that either designation can be acceptable.« less

7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 11 2013-01-01 2013-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 11 2011-01-01 2011-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 11 2012-01-01 2012-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

7 CFR 1724.50 - Compliance with National Electrical Safety Code (NESC).

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 11 2014-01-01 2014-01-01 false Compliance with National Electrical Safety Code (NESC... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.50 Compliance with National Electrical Safety Code...

Police accident report forms: safety device coding and enacted laws.

PubMed

Brock, K; Lapidus, G

2008-12-01

Safety device coding on state police accident report (PAR) forms was compared with provisions in state traffic safety laws. PAR forms were obtained from all 50 states and the District of Columbia (states/DC). For seat belts, 22 states/DC had a primary seat belt enforcement law vs 50 with a PAR code. For car seats, all 51 states/DC had a law and a PAR code. For booster seats, 39 states/DC had a law vs nine with a PAR code. For motorcycle helmets, 21 states/DC had an all-age rider helmet law and another 26 a partial-age law vs 50 with a PAR code. For bicycle helmets, 21 states/DC had a partial-age rider helmet law vs 48 with a PAR code. Therefore gaps in the ability of states to fully record accident data reflective of existing state traffic safety laws are revealed. Revising the PAR forms in all states to include complete variables for safety devices should be an important priority, independent of the laws.

Certifying Auto-Generated Flight Code

NASA Technical Reports Server (NTRS)

Denney, Ewen

2008-01-01

Model-based design and automated code generation are being used increasingly at NASA. Many NASA projects now use MathWorks Simulink and Real-Time Workshop for at least some of their modeling and code development. However, there are substantial obstacles to more widespread adoption of code generators in safety-critical domains. Since code generators are typically not qualified, there is no guarantee that their output is correct, and consequently the generated code still needs to be fully tested and certified. Moreover, the regeneration of code can require complete recertification, which offsets many of the advantages of using a generator. Indeed, manual review of autocode can be more challenging than for hand-written code. Since the direct V&V of code generators is too laborious and complicated due to their complex (and often proprietary) nature, we have developed a generator plug-in to support the certification of the auto-generated code. Specifically, the AutoCert tool supports certification by formally verifying that the generated code is free of different safety violations, by constructing an independently verifiable certificate, and by explaining its analysis in a textual form suitable for code reviews. The generated documentation also contains substantial tracing information, allowing users to trace between model, code, documentation, and V&V artifacts. This enables missions to obtain assurance about the safety and reliability of the code without excessive manual V&V effort and, as a consequence, eases the acceptance of code generators in safety-critical contexts. The generation of explicit certificates and textual reports is particularly well-suited to supporting independent V&V. The primary contribution of this approach is the combination of human-friendly documentation with formal analysis. The key technical idea is to exploit the idiomatic nature of auto-generated code in order to automatically infer logical annotations. The annotation inference algorithm itself is generic, and parametrized with respect to a library of coding patterns that depend on the safety policies and the code generator. The patterns characterize the notions of definitions and uses that are specific to the given safety property. For example, for initialization safety, definitions correspond to variable initializations while uses are statements which read a variable, whereas for array bounds safety, definitions are the array declarations, while uses are statements which access an array variable. The inferred annotations are thus highly dependent on the actual program and the properties being proven. The annotations, themselves, need not be trusted, but are crucial to obtain the automatic formal verification of the safety properties without requiring access to the internals of the code generator. The approach has been applied to both in-house and commercial code generators, but is independent of the particular generator used. It is currently being adapted to flight code generated using MathWorks Real-Time Workshop, an automatic code generator that translates from Simulink/Stateflow models into embedded C code.

Fusion Safety Program annual report, fiscal year 1994

NASA Astrophysics Data System (ADS)

Longhurst, Glen R.; Cadwallader, Lee C.; Dolan, Thomas J.; Herring, J. Stephen; McCarthy, Kathryn A.; Merrill, Brad J.; Motloch, Chester C.; Petti, David A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities.

Beyond crosswalks: reliability of exposure assessment following automated coding of free-text job descriptions for occupational epidemiology.

PubMed

Burstyn, Igor; Slutsky, Anton; Lee, Derrick G; Singer, Alison B; An, Yuan; Michael, Yvonne L

2014-05-01

Epidemiologists typically collect narrative descriptions of occupational histories because these are less prone than self-reported exposures to recall bias of exposure to a specific hazard. However, the task of coding these narratives can be daunting and prohibitively time-consuming in some settings. The aim of this manuscript is to evaluate the performance of a computer algorithm to translate the narrative description of occupational codes into standard classification of jobs (2010 Standard Occupational Classification) in an epidemiological context. The fundamental question we address is whether exposure assignment resulting from manual (presumed gold standard) coding of the narratives is materially different from that arising from the application of automated coding. We pursued our work through three motivating examples: assessment of physical demands in Women's Health Initiative observational study, evaluation of predictors of exposure to coal tar pitch volatiles in the US Occupational Safety and Health Administration's (OSHA) Integrated Management Information System, and assessment of exposure to agents known to cause occupational asthma in a pregnancy cohort. In these diverse settings, we demonstrate that automated coding of occupations results in assignment of exposures that are in reasonable agreement with results that can be obtained through manual coding. The correlation between physical demand scores based on manual and automated job classification schemes was reasonable (r = 0.5). The agreement between predictive probability of exceeding the OSHA's permissible exposure level for polycyclic aromatic hydrocarbons, using coal tar pitch volatiles as a surrogate, based on manual and automated coding of jobs was modest (Kendall rank correlation = 0.29). In the case of binary assignment of exposure to asthmagens, we observed that fair to excellent agreement in classifications can be reached, depending on presence of ambiguity in assigned job classification (κ = 0.5-0.8). Thus, the success of automated coding appears to depend on the setting and type of exposure that is being assessed. Our overall recommendation is that automated translation of short narrative descriptions of jobs for exposure assessment is feasible in some settings and essential for large cohorts, especially if combined with manual coding to both assess reliability of coding and to further refine the coding algorithm.

Fire Technology Abstracts, volume 4, issue 1, August, 1981

NASA Astrophysics Data System (ADS)

Holtschlag, L. J.; Kuvshinoff, B. W.; Jernigan, J. B.

This bibliography contains over 400 citations with abstracts addressing various aspects of fire technology. Subjects cover the dynamics of fire, behavior and properties of materials, fire modeling and test burns, fire protection, fire safety, fire service organization, apparatus and equipment, fire prevention, suppression, planning, human behavior, medical problems, codes and standards, hazard identification, safe handling of materials, insurance, economics of loss and prevention, and more.

2014 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2014-10-01

This report summarizes comments from the Peer Review Panel at the 2014 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on June 16-20, 2014, in Washington, DC. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; market transformation; and systems analysis.

2015 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This report summarizes comments from the Peer Review Panel at the 2015 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on June 8-12, 2015, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; market transformation; and systems analysis.

2012 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2012-09-01

This report summarizes comments from the Peer Review Panel at the 2012 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on May 14-18, 2012, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; education; market transformation; and systems analysis.

2011 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2011-09-01

This report summarizes comments from the Peer Review Panel at the 2011 DOE Hydrogen and Fuel Cells Program Annual Merit Review, held on May 9-13, 2011, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R&D; technology validation; safety, codes, and standards; education; market transformation; and systems analysis.

Building Code Compliance and Enforcement: The Experience of SanFrancisco's Residential Energy Conservation Ordinanace and California'sBuildign Standards for New Construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vine, E.

1990-11-01

As part of Lawrence Berkeley Laboratory's (LBL) technical assistance to the Sustainable City Project, compliance and enforcement activities related to local and state building codes for existing and new construction were evaluated in two case studies. The analysis of the City of San Francisco's Residential Energy Conservation Ordinance (RECO) showed that a limited, prescriptive energy conservation ordinance for existing residential construction can be enforced relatively easily with little administrative costs, and that compliance with such ordinances can be quite high. Compliance with the code was facilitated by extensive publicity, an informed public concerned with the cost of energy and knowledgeablemore » about energy efficiency, the threat of punishment (Order of Abatement), the use of private inspectors, and training workshops for City and private inspectors. The analysis of California's Title 24 Standards for new residential and commercial construction showed that enforcement of this type of code for many climate zones is more complex and requires extensive administrative support for education and training of inspectors, architects, engineers, and builders. Under this code, prescriptive and performance approaches for compliance are permitted, resulting in the demand for alternative methods of enforcement: technical assistance, plan review, field inspection, and computer analysis. In contrast to existing construction, building design and new materials and construction practices are of critical importance in new construction, creating a need for extensive technical assistance and extensive interaction between enforcement personnel and the building community. Compliance problems associated with building design and installation did occur in both residential and nonresidential buildings. Because statewide codes are enforced by local officials, these problems may increase over time as energy standards change and become more complex and as other standards (eg, health and safety codes) remain a higher priority. The California Energy Commission realizes that code enforcement by itself is insufficient and expects that additional educational and technical assistance efforts (eg, manuals, training programs, and toll-free telephone lines) will ameliorate these problems.« less

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 5 2013-07-01 2013-07-01 false Safety color code for marking physical hazards. 1910.144... § 1910.144 Safety color code for marking physical hazards. (a) Color identification—(1) Red. Red shall be the basic color for the identification of: (i) Fire protection equipment and apparatus. [Reserved] (ii...

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Safety color code for marking physical hazards. 1910.144... § 1910.144 Safety color code for marking physical hazards. (a) Color identification—(1) Red. Red shall be the basic color for the identification of: (i) Fire protection equipment and apparatus. [Reserved] (ii...

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Safety color code for marking physical hazards. 1910.144... § 1910.144 Safety color code for marking physical hazards. (a) Color identification—(1) Red. Red shall be the basic color for the identification of: (i) Fire protection equipment and apparatus. [Reserved] (ii...

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Safety color code for marking physical hazards. 1910.144... § 1910.144 Safety color code for marking physical hazards. (a) Color identification—(1) Red. Red shall be... basic color for designating caution and for marking physical hazards such as: Striking against...

30 CFR 905.773 - Requirements for permits and permit processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., 42 U.S.C. 7401 et seq California Air Pollution Control Laws, Cal. Health & Safety Code section 39000... (11) Noise Control Act, 42 U.S.C. 4903 California Noise Control Act of 1973, Cal. Health & Safety Code... Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the Hazardous Waste Control Law...

Postirradiation Testing Laboratory (327 Building)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kammenzind, D.E.

A Standards/Requirements Identification Document (S/RID) is the total list of the Environment, Safety and Health (ES and H) requirements to be implemented by a site, facility, or activity. These requirements are appropriate to the life cycle phase to achieve an adequate level of protection for worker and public health and safety, and the environment during design, construction, operation, decontamination and decommissioning, and environmental restoration. S/RlDs are living documents, to be revised appropriately based on change in the site`s or facility`s mission or configuration, a change in the facility`s life cycle phase, or a change to the applicable standards/requirements. S/RIDs encompassmore » health and safety, environmental, and safety related safeguards and security (S and S) standards/requirements related to the functional areas listed in the US Department of Energy (DOE) Environment, Safety and Health Configuration Guide. The Fluor Daniel Hanford (FDH) Contract S/RID contains standards/requirements, applicable to FDH and FDH subcontractors, necessary for safe operation of Project Hanford Management Contract (PHMC) facilities, that are not the direct responsibility of the facility manager (e.g., a site-wide fire department). Facility S/RIDs contain standards/requirements applicable to a specific facility that are the direct responsibility of the facility manager. S/RlDs are prepared by those responsible for managing the operation of facilities or the conduct of activities that present a potential threat to the health and safety of workers, public, or the environment, including: Hazard Category 1 and 2 nuclear facilities and activities, as defined in DOE 5480.23. Selected Hazard Category 3 nuclear, and Low Hazard non-nuclear facilities and activities, as agreed upon by RL. The Postirradiation Testing Laboratory (PTL) S/RID contains standards/ requirements that are necessary for safe operation of the PTL facility, and other building/areas that are the direct responsibility of the specific facility manager. The specific DOE Orders, regulations, industry codes/standards, guidance documents and good industry practices that serve as the basis for each element/subelement are identified and aligned with each subelement.« less

Impacts: NIST Building and Fire Research Laboratory (technical and societal)

NASA Astrophysics Data System (ADS)

Raufaste, N. J.

1993-08-01

The Building and Fire Research Laboratory (BFRL) of the National Institute of Standards and Technology (NIST) is dedicated to the life cycle quality of constructed facilities. The report describes major effects of BFRL's program on building and fire research. Contents of the document include: structural reliability; nondestructive testing of concrete; structural failure investigations; seismic design and construction standards; rehabilitation codes and standards; alternative refrigerants research; HVAC simulation models; thermal insulation; residential equipment energy efficiency; residential plumbing standards; computer image evaluation of building materials; corrosion-protection for reinforcing steel; prediction of the service lives of building materials; quality of construction materials laboratory testing; roofing standards; simulating fires with computers; fire safety evaluation system; fire investigations; soot formation and evolution; cone calorimeter development; smoke detector standards; standard for the flammability of children's sleepwear; smoldering insulation fires; wood heating safety research; in-place testing of concrete; communication protocols for building automation and control systems; computer simulation of the properties of concrete and other porous materials; cigarette-induced furniture fires; carbon monoxide formation in enclosure fires; halon alternative fire extinguishing agents; turbulent mixing research; materials fire research; furniture flammability testing; standard for the cigarette ignition resistance of mattresses; support of navy firefighter trainer program; and using fire to clean up oil spills.

Triangulating case-finding tools for patient safety surveillance: a cross-sectional case study of puncture/laceration.

PubMed

Taylor, Jennifer A; Gerwin, Daniel; Morlock, Laura; Miller, Marlene R

2011-12-01

To evaluate the need for triangulating case-finding tools in patient safety surveillance. This study applied four case-finding tools to error-associated patient safety events to identify and characterise the spectrum of events captured by these tools, using puncture or laceration as an example for in-depth analysis. Retrospective hospital discharge data were collected for calendar year 2005 (n=48,418) from a large, urban medical centre in the USA. The study design was cross-sectional and used data linkage to identify the cases captured by each of four case-finding tools. Three case-finding tools (International Classification of Diseases external (E) and nature (N) of injury codes, Patient Safety Indicators (PSI)) were applied to the administrative discharge data to identify potential patient safety events. The fourth tool was Patient Safety Net, a web-based voluntary patient safety event reporting system. The degree of mutual exclusion among detection methods was substantial. For example, when linking puncture or laceration on unique identifiers, out of 447 potential events, 118 were identical between PSI and E-codes, 152 were identical between N-codes and E-codes and 188 were identical between PSI and N-codes. Only 100 events that were identified by PSI, E-codes and N-codes were identical. Triangulation of multiple tools through data linkage captures potential patient safety events most comprehensively. Existing detection tools target patient safety domains differently, and consequently capture different occurrences, necessitating the integration of data from a combination of tools to fully estimate the total burden.

Safety Standard for Hydrogen and Hydrogen Systems: Guidelines for Hydrogen System Design, Materials Selection, Operations, Storage and Transportation. Revision

NASA Technical Reports Server (NTRS)

1997-01-01

The NASA Safety Standard, which establishes a uniform process for hydrogen system design, materials selection, operation, storage, and transportation, is presented. The guidelines include suggestions for safely storing, handling, and using hydrogen in gaseous (GH2), liquid (LH2), or slush (SLH2) form whether used as a propellant or non-propellant. The handbook contains 9 chapters detailing properties and hazards, facility design, design of components, materials compatibility, detection, and transportation. Chapter 10 serves as a reference and the appendices contained therein include: assessment examples; scaling laws, explosions, blast effects, and fragmentation; codes, standards, and NASA directives; and relief devices along with a list of tables and figures, abbreviations, a glossary and an index for ease of use. The intent of the handbook is to provide enough information that it can be used alone, but at the same time, reference data sources that can provide much more detail if required.

Comparisons of ANS, ASME, AWS, and NFPA standards cited in the NRC standard review plan, NUREG-0800, and related documents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.

This report provides the results of comparisons of the cited and latest versions of ANS, ASME, AWS and NFPA standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC`s Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented.more » Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review.« less

Evaluation of Safety, Quality and Productivity in Construction

NASA Astrophysics Data System (ADS)

Usmen, M. A.; Vilnitis, M.

2015-11-01

This paper examines the success indicators of construction projects, safety, quality and productivity, in terms of their implications and impacts during and after construction. First safety is considered during construction with a focus on hazard identification and the prevention of occupational accidents and injuries on worksites. The legislation mandating safety programs, training and compliance with safety standards is presented and discussed. Consideration of safety at the design stage is emphasized. Building safety and the roles of building codes in prevention of structural failures are also covered in the paper together with factors affecting building failures and methods for their prevention. Quality is introduced in the paper from the perspective of modern total quality management. Concepts of quality management, quality control, quality assurance and Six Sigma and how they relate to building quality and structural integrity are discussed with examples. Finally, productivity concepts are presented with emphasis on effective project management to minimize loss of productivity, complimented by lean construction and lean Six Sigma principles. The paper concludes by synthesizing the relationships between safety, quality and productivity.

76 FR 65544 - Standard Format and Content of License Applications for Mixed Oxide Fuel Fabrication Facilities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-21

...The U.S. Nuclear Regulatory Commission (NRC or Commission) is issuing a revision to regulatory guide (RG) 3.39, ``Standard Format and Content of License Applications for Mixed Oxide Fuel Fabrication Facilities.'' This guide endorses the standard format and content for license applications and integrated safety analysis (ISA) summaries described in the current version of NUREG-1718, ``Standard Review Plan for the Review of an Application for a Mixed Oxide (MOX) Fuel Fabrication Facility,'' as a method that the NRC staff finds acceptable for meeting the regulatory requirements of Title 10 of the Code of Federal Regulations (10 CFR) part 70, ``Domestic Licensing of Special Nuclear Material'' for mixed oxide fuel fabrication facilities.

Industry and Occupation in the Electronic Health Record: An Investigation of the National Institute for Occupational Safety and Health Industry and Occupation Computerized Coding System.

PubMed

Schmitz, Matthew; Forst, Linda

2016-02-15

Inclusion of information about a patient's work, industry, and occupation, in the electronic health record (EHR) could facilitate occupational health surveillance, better health outcomes, prevention activities, and identification of workers' compensation cases. The US National Institute for Occupational Safety and Health (NIOSH) has developed an autocoding system for "industry" and "occupation" based on 1990 Bureau of Census codes; its effectiveness requires evaluation in conjunction with promoting the mandatory addition of these variables to the EHR. The objective of the study was to evaluate the intercoder reliability of NIOSH's Industry and Occupation Computerized Coding System (NIOCCS) when applied to data collected in a community survey conducted under the Affordable Care Act; to determine the proportion of records that are autocoded using NIOCCS. Standard Occupational Classification (SOC) codes are used by several federal agencies in databases that capture demographic, employment, and health information to harmonize variables related to work activities among these data sources. There are 359 industry and occupation responses that were hand coded by 2 investigators, who came to a consensus on every code. The same variables were autocoded using NIOCCS at the high and moderate criteria level. Kappa was .84 for agreement between hand coders and between the hand coder consensus code versus NIOCCS high confidence level codes for the first 2 digits of the SOC code. For 4 digits, NIOCCS coding versus investigator coding ranged from kappa=.56 to .70. In this study, NIOCCS was able to achieve production rates (ie, to autocode) 31%-36% of entered variables at the "high confidence" level and 49%-58% at the "medium confidence" level. Autocoding (production) rates are somewhat lower than those reported by NIOSH. Agreement between manually coded and autocoded data are "substantial" at the 2-digit level, but only "fair" to "good" at the 4-digit level. This work serves as a baseline for performance of NIOCCS by investigators in the field. Further field testing will clarify NIOCCS effectiveness in terms of ability to assign codes and coding accuracy and will clarify its value as inclusion of these occupational variables in the EHR is promoted.

Maternal worries, home safety behaviors, and perceived difficulties.

PubMed

Hendrickson, Sherry Garrett

2008-01-01

The aim of the study was to explore the worries, safety behaviors, and perceived difficulties in keeping children safe at home in a purposive sample of low-income, predominantly non-English speaking mothers as a foundation for later nursing interventions. This study was a qualitative, descriptive design with content analysis to identify maternal concerns, behaviors, and perceptions of home safety as part of a larger study. Eighty-two mothers, 64% of whom were monolingual Spanish-speakers, responded in writing to three semistructured interview questions. When mothers were unable to read and write the researcher wrote the responses, then read the content aloud for verification. A standardized probe for each question was posed to obtain richer responses. Data management included use of the software program NUD*IST and coding analyses following the Miles and Huberman guidelines (1994). Interpretations were translated into English for this report. The major worries were falling, health, kidnapping, and being hit by a car. The leading maternal behaviors were coded as being physically, verbally, and environmentally preventive. Mothers said that it was their role to provide safety, and that this role could be wearisome, such that constant supervision was difficult. Low-income mothers described their worries for their 1 to 4 year-old children, explored their behaviors for preventing injury, and discussed what made keeping children from harm difficult. Understanding how mothers keep children safe, the barriers to home safety, and effective safety behaviors are important to the health of children. The clinical relevance of this study includes building trust as clinicians plan assessment, intervention and evaluation of home safety to encourage dialog about concerns, safety behaviors, and barriers to keeping children from injury.

El Camino Hospital: using health information technology to promote patient safety.

PubMed

Bukunt, Susan; Hunter, Christine; Perkins, Sharon; Russell, Diana; Domanico, Lee

2005-10-01

El Camino Hospital is a leader in the use of health information technology to promote patient safety, including bar coding, computerized order entry, electronic medical records, and wireless communications. Each year, El Camino Hospital's board of directors sets performance expectations for the chief executive officer, which are tied to achievement of local, regional, and national safety and quality standards, including the six Institute of Medicine quality dimensions. He then determines a set of explicit quality goals and measurable actions, which serve as guidelines for the overall hospital. The goals and progress reports are widely shared with employees, medical staff, patients and families, and the public. For safety, for example, the medication error reduction team tracks and reviews medication error rates. The hospital has virtually eliminated transcription errors through its 100% use of computerized physician order entry. Clinical pathways and standard order sets have reduced practice variation, providing a safer environment. Many projects focused on timeliness, such as emergency department wait time, lab turnaround time, and pneumonia time to initial antibiotic. Results have been mixed, with projects most successful when a link was established with patient outcomes, such as in reducing time to percutaneous transluminal coronary angioplasty for patients with acute myocardial infarction.

Fire technology abstracts, volume 4. Cumulative indexes

NASA Astrophysics Data System (ADS)

1982-03-01

Cumulative subject, author, publisher, and report number indexes referencing articles, books, reports, and patents are provided. The dynamics of fire, behavior and properties of materials, fire modeling and test burns, fire protection, fire safety, fire service organization, apparatus and equipment, fire prevention suppression, planning, human behavior, medical problems, codes and standards, hazard identification, safe handling of materials, and insurance economics of loss and prevention are among the subjects covered.

Requirements for a multifunctional code architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tiihonen, O.; Juslin, K.

1997-07-01

The present paper studies a set of requirements for a multifunctional simulation software architecture in the light of experiences gained in developing and using the APROS simulation environment. The huge steps taken in the development of computer hardware and software during the last ten years are changing the status of the traditional nuclear safety analysis software. The affordable computing power on the safety analysts table by far exceeds the possibilities offered to him/her ten years ago. At the same time the features of everyday office software tend to set standards to the way the input data and calculational results aremore » managed.« less

Kayenta Township Building & Safety Department, Tribal Green Building Code Summit Presentation

EPA Pesticide Factsheets

Tribal Green Building Code Summit Presentation by Kayenta Township Building & Safety Department showing how they established the building department, developed a code adoption and enforcement process, and hired staff to carry out the work.

Posttest analysis of the FFTF inherent safety tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Padilla, A. Jr.; Claybrook, S.W.

Inherent safety tests were performed during 1986 in the 400-MW (thermal) Fast Flux Test Facility (FFTF) reactor to demonstrate the effectiveness of an inherent shutdown device called the gas expansion module (GEM). The GEM device provided a strong negative reactivity feedback during loss-of-flow conditions by increasing the neutron leakage as a result of an expanding gas bubble. The best-estimate pretest calculations for these tests were performed using the IANUS plant analysis code (Westinghouse Electric Corporation proprietary code) and the MELT/SIEX3 core analysis code. These two codes were also used to perform the required operational safety analyses for the FFTF reactormore » and plant. Although it was intended to also use the SASSYS systems (core and plant) analysis code, the calibration of the SASSYS code for FFTF core and plant analysis was not completed in time to perform pretest analyses. The purpose of this paper is to present the results of the posttest analysis of the 1986 FFTF inherent safety tests using the SASSYS code.« less

Safety-related requirements for photovoltaic modules and arrays

NASA Technical Reports Server (NTRS)

Levins, A.; Smoot, A.; Wagner, R.

1984-01-01

Safety requirements for photovoltaic module and panel designs and configurations for residential, intermediate, and large scale applications are investigated. Concepts for safety systems, where each system is a collection of subsystems which together address the total anticipated hazard situation, are described. Descriptions of hardware, and system usefulness and viability are included. A comparison of these systems, as against the provisions of the 1984 National Electrical Code covering photovoltaic systems is made. A discussion of the Underwriters Laboratory UL investigation of the photovoltaic module evaluated to the provisions of the proposed UL standard for plat plate photovoltaic modules and panels is included. Grounding systems, their basis and nature, and the advantages and disadvantages of each are described. The meaning of frame grounding, circuit groundings, and the type of circuit ground are covered.

Seismic assessment of Technical Area V (TA-V).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Medrano, Carlos S.

The Technical Area V (TA-V) Seismic Assessment Report was commissioned as part of Sandia National Laboratories (SNL) Self Assessment Requirement per DOE O 414.1, Quality Assurance, for seismic impact on existing facilities at Technical Area-V (TA-V). SNL TA-V facilities are located on an existing Uniform Building Code (UBC) Seismic Zone IIB Site within the physical boundary of the Kirtland Air Force Base (KAFB). The document delineates a summary of the existing facilities with their safety-significant structure, system and components, identifies DOE Guidance, conceptual framework, past assessments and the present Geological and Seismic conditions. Building upon the past information and themore » evolution of the new seismic design criteria, the document discusses the potential impact of the new standards and provides recommendations based upon the current International Building Code (IBC) per DOE O 420.1B, Facility Safety and DOE G 420.1-2, Guide for the Mitigation of Natural Phenomena Hazards for DOE Nuclear Facilities and Non-Nuclear Facilities.« less

Evaluation of radiological dispersion/consequence codes supporting DOE nuclear facility SARs

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Kula, K.R.; Paik, I.K.; Chung, D.Y.

1996-12-31

Since the early 1990s, the authorization basis documentation of many U.S. Department of Energy (DOE) nuclear facilities has been upgraded to comply with DOE orders and standards. In this process, many safety analyses have been revised. Unfortunately, there has been nonuniform application of software, and the most appropriate computer and engineering methodologies often are not applied. A DOE Accident Phenomenology and Consequence (APAC) Methodology Evaluation Program was originated at the request of DOE Defense Programs to evaluate the safety analysis methodologies used in nuclear facility authorization basis documentation and to define future cost-effective support and development initiatives. Six areas, includingmore » source term development (fire, spills, and explosion analysis), in-facility transport, and dispersion/ consequence analysis (chemical and radiological) are contained in the APAC program. The evaluation process, codes considered, key results, and recommendations for future model and software development of the Radiological Dispersion/Consequence Working Group are summarized in this paper.« less

Towards a global IT system for personalized medicine: the Medicine Safety Code initiative.

PubMed

Samwald, Matthias; Minarro-Giménez, José Antonio; Blagec, Kathrin; Adlassnig, Klaus-Peter

2014-01-01

The availability of pharmacogenomic data of individual patients can significantly improve physicians' prescribing behavior, lead to a reduced incidence of adverse drug events and an improvement of effectiveness of treatment. The Medicine Safety Code (MSC) initiative is an effort to improve the ability of clinicians and patients to share pharmacogenomic data and to use it at the point of care. The MSC is a standardized two-dimensional barcode that captures individual pharmacogenomic data. The system is backed by a web service that allows the decoding and interpretation of anonymous MSCs without requiring the installation of dedicated software. The system is based on a curated, ontology-based knowledge base representing pharmacogenomic definitions and clinical guidelines. The MSC system performed well in preliminary tests. To evaluate the system in realistic health care settings and to translate it into practical applications, the future participation of stakeholders in clinical institutions, researchers, pharmaceutical companies, genetic testing providers, health IT companies and health insurance organizations will be essential.

Towards a global IT system for personalized medicine: the Medicine Safety Code initiative.

PubMed

Samwald, Matthias; Minarro-Giménez, José Antonio; Blagec, Kathrin; Adlassnig, Klaus-Peter

2014-01-01

The availability of pharmacogenomic data of individual patients can significantly improve physicians' prescribing behavior, lead to a reduced incidence of adverse drug events and an improvement of effectiveness of treatment. The Medicine Safety Code (MSC) initiative is an effort to improve the ability of clinicians and patients to share pharmacogenomic data and to use it at the point of care. The MSC is a standardized two-dimensional barcode that captures individual pharmacogenomic data. The system is backed by a web service that allows the decoding and interpretation of anonymous MSCs without requiring the installation of dedicated software. The system is based on a curated, ontology-based knowledge base representing pharmacogenomic definitions and clinical guidelines. The MSC system performed well in preliminary tests. To evaluate the system in realistic health care settings and to translate it into practical applications, the future participation of stakeholders in clinical institutions, medical researchers, pharmaceutical companies, genetic testing providers, health IT companies and health insurance organizations will be essential.

Seismic Safety Of Simple Masonry Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guadagnuolo, Mariateresa; Faella, Giuseppe

2008-07-08

Several masonry buildings comply with the rules for simple buildings provided by seismic codes. For these buildings explicit safety verifications are not compulsory if specific code rules are fulfilled. In fact it is assumed that their fulfilment ensures a suitable seismic behaviour of buildings and thus adequate safety under earthquakes. Italian and European seismic codes differ in the requirements for simple masonry buildings, mostly concerning the building typology, the building geometry and the acceleration at site. Obviously, a wide percentage of buildings assumed simple by codes should satisfy the numerical safety verification, so that no confusion and uncertainty have tomore » be given rise to designers who must use the codes. This paper aims at evaluating the seismic response of some simple unreinforced masonry buildings that comply with the provisions of the new Italian seismic code. Two-story buildings, having different geometry, are analysed and results from nonlinear static analyses performed by varying the acceleration at site are presented and discussed. Indications on the congruence between code rules and results of numerical analyses performed according to the code itself are supplied and, in this context, the obtained result can provide a contribution for improving the seismic code requirements.« less

Alternative Fuels Data Center: Codes and Standards Resources

Science.gov Websites

codes and standards. Biodiesel Vehicle and Infrastructure Codes and Standards Chart Electric Vehicle and Infrastructure Codes and Standards Chart Ethanol Vehicle and Infrastructure Codes and Standards Chart Natural Gas Vehicle and Infrastructure Codes and Standards Chart Propane Vehicle and Infrastructure Codes and

Report on SARS backfit evaluation, Catalytic, Inc. Solvent Refined Coal Pilot Plant, Wilsonville, Alabama

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, A.F. Jr.

1980-07-02

A site visit was made in company with the DOE-OPTA-EA Safety and Health Official for the purpose of providing that official with technical assistance in evaluating the validity of an earlier DOE-OPTA recommendation exempting this facility from the Safety and Analysis and Review backfit requirements of DOE Order 5481.1. A further purpose of the visit was to assess and evaluate the occupational safety and health program at this facility, as compared with the criteria and guidelines contained in ASFE Order 5481.1. Adequate documentation regarding compliance with codes, standards, and regulations were observed at this facility. There is in existence anmore » ongoing continuous safety analysis effort for both modifications or additions to this facility. Adequate environmental safeguards and plans and procedures were observed. The SARS backfit exemption is appropriate. The occupational safety and health program is in many ways a model for the scope of work and nature of hazards involved, and is consistent with ASFE guidelines and statutory requirements.« less

Fire safety

Treesearch

Robert H. White; Mark A. Dietenberger

1999-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Since basic data on fire behavior of wood products...

29 CFR Appendix A to Subpart S of... - References for Further Information

Code of Federal Regulations, 2014 CFR

2014-07-01

... Safety, Health, and Environmental Training. ANSI/IEEE C2-2002 National Electrical Safety Code. ANSI K61.1.... NFPA 59-2004 Utility LP-Gas Plant Code. NFPA 70-2002 National Electrical Code. (See also NFPA 70-2005.... NMAB 353-3-1980 Classification of Combustible Dust in Accordance with the National Electrical Code. [72...

29 CFR Appendix A to Subpart S of... - References for Further Information

Code of Federal Regulations, 2011 CFR

2011-07-01

... Safety, Health, and Environmental Training. ANSI/IEEE C2-2002 National Electrical Safety Code. ANSI K61.1.... NFPA 59-2004 Utility LP-Gas Plant Code. NFPA 70-2002 National Electrical Code. (See also NFPA 70-2005.... NMAB 353-3-1980 Classification of Combustible Dust in Accordance with the National Electrical Code. [72...

29 CFR Appendix A to Subpart S of... - References for Further Information

Code of Federal Regulations, 2012 CFR

2012-07-01

... Safety, Health, and Environmental Training. ANSI/IEEE C2-2002 National Electrical Safety Code. ANSI K61.1.... NFPA 59-2004 Utility LP-Gas Plant Code. NFPA 70-2002 National Electrical Code. (See also NFPA 70-2005.... NMAB 353-3-1980 Classification of Combustible Dust in Accordance with the National Electrical Code. [72...

29 CFR Appendix A to Subpart S of... - References for Further Information

Code of Federal Regulations, 2013 CFR

2013-07-01

... Safety, Health, and Environmental Training. ANSI/IEEE C2-2002 National Electrical Safety Code. ANSI K61.1.... NFPA 59-2004 Utility LP-Gas Plant Code. NFPA 70-2002 National Electrical Code. (See also NFPA 70-2005.... NMAB 353-3-1980 Classification of Combustible Dust in Accordance with the National Electrical Code. [72...

Long range targeting for space based rendezvous

NASA Technical Reports Server (NTRS)

Everett, Louis J.; Redfield, R. C.

1995-01-01

The work performed under this grant supported the Dexterous Flight Experiment one STS-62 The project required developing hardware and software for automating a TRAC sensor on orbit. The hardware developed by for the flight has been documented through standard NASA channels since it has to pass safety, environmental, and other issues. The software has not been documented previously, therefore, this report provides a software manual for the TRAC code developed for the grant.

77 FR 42654 - Trifloxystrobin; Pesticide Tolerance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This... filing. III. Aggregate Risk Assessment and Determination of Safety Section 408(b)(2)(A)(i) of FFDCA... dose at which adverse effects of concern are identified (the LOAEL). Uncertainty/safety factors are...

Standard of care: the legal view.

PubMed

Curley, Arthur W; Peltier, Bruce

2014-01-01

The standard of care is a legal construct, a line defined by juries, based on expert testimony, marking a point where treatment failed to meet expectations for what a reasonable professional would have done. There is no before-the-fact objective definition of this standard, except for cases of law and regulation, such as the Occupational Safety and Health Admintration (OSHA). Practitioners must use their judgment in determining what would be acceptable should a case come to trial. Professional codes of conduct and acting in the patient's best interests are helpful guides to practicing within the standard of care. Continuing education credit is available for this and the following article together online at www.dentalethics.org for those who wish to complete the quiz and exercises associated with them (see Course 22).

ESAS Deliverable PS 1.1.2.3: Customer Survey on Code Generations in Safety-Critical Applications

NASA Technical Reports Server (NTRS)

Schumann, Johann; Denney, Ewen

2006-01-01

Automated code generators (ACG) are tools that convert a (higher-level) model of a software (sub-)system into executable code without the necessity for a developer to actually implement the code. Although both commercially supported and in-house tools have been used in many industrial applications, little data exists on how these tools are used in safety-critical domains (e.g., spacecraft, aircraft, automotive, nuclear). The aims of the survey, therefore, were threefold: 1) to determine if code generation is primarily used as a tool for prototyping, including design exploration and simulation, or for fiight/production code; 2) to determine the verification issues with code generators relating, in particular, to qualification and certification in safety-critical domains; and 3) to determine perceived gaps in functionality of existing tools.

Knowledge of and attitude towards road traffic codes among commercial motorcycle riders in Anambra State.

PubMed

Adogu, O U; Ilika, A L

2006-12-01

Road traffic accidents (rtas) represent a major epidemic of non communicable disease in the country and has since escalated with the introduction of the new phenomenon of commercial motorcycle transportation such as is found in the two urban towns of nnewi and Awka of Anambra state, Nigeria. making use of a pre-tested, semi structured, interviewer administered questionnaire, relevant data on socio demographic and motorcycle characteristics were collected from a sample of commercial motorcyclists selected by systematic sampling technique. their knowledge of and attitude towards road traffic and safety codes were elicited. The result showed that the all-male commercial motorcyclists had a mean age of 30+8.9 years. one hundred and seventy six (32.6%) possessed good knowledge of road traffic codes and safety, while 35 (6.5%) exhibited good attitude towards them. both knowledge of and attitude towards traffic codes and safety improved with increase in educational level (p<0.005, p<0.001 respectively). the younger motorcyclists also possessed statistically significant better knowledge of traffic codes than their older counterparts (p<0.025). attitude to traffic codes and safety had no association with age of the motorcyclists (p>0.25). the study has provided useful information on the knowledge of and attitude towards road traffic and safety codes among commercial motorcyclists in nigeria. pursuit of knowledge through formal and informal education should run pari pasu with efforts to improve the nigerian economy in order to ensure a sustainable positive attitudinal change towards road traffic codes and safety among commercial motorcyclists.

Fire safety of wood construction

Treesearch

Robert H. White; Mark A. Dietenberger

2010-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements and related fire performance data are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Because basic data...

Pressure Safety Program Implementation at ORNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lower, Mark; Etheridge, Tom; Oland, C. Barry

2013-01-01

The Oak Ridge National Laboratory (ORNL) is a US Department of Energy (DOE) facility that is managed by UT-Battelle, LLC. In February 2006, DOE promulgated worker safety and health regulations to govern contractor activities at DOE sites. These regulations, which are provided in 10 CFR 851, Worker Safety and Health Program, establish requirements for worker safety and health program that reduce or prevent occupational injuries, illnesses, and accidental losses by providing DOE contractors and their workers with safe and healthful workplaces at DOE sites. The regulations state that contractors must achieve compliance no later than May 25, 2007. According tomore » 10 CFR 851, Subpart C, Specific Program Requirements, contractors must have a structured approach to their worker safety and health programs that at a minimum includes provisions for pressure safety. In implementing the structured approach for pressure safety, contractors must establish safety policies and procedures to ensure that pressure systems are designed, fabricated, tested, inspected, maintained, repaired, and operated by trained, qualified personnel in accordance with applicable sound engineering principles. In addition, contractors must ensure that all pressure vessels, boilers, air receivers, and supporting piping systems conform to (1) applicable American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (2004) Sections I through XII, including applicable code cases; (2) applicable ASME B31 piping codes; and (3) the strictest applicable state and local codes. When national consensus codes are not applicable because of pressure range, vessel geometry, use of special materials, etc., contractors must implement measures to provide equivalent protection and ensure a level of safety greater than or equal to the level of protection afforded by the ASME or applicable state or local codes. This report documents the work performed to address legacy pressure vessel deficiencies and comply with pressure safety requirements in 10 CFR 851. It also describes actions taken to develop and implement ORNL’s Pressure Safety Program.« less

Code Status Reconciliation to Improve Identification and Documentation of Code Status in Electronic Health Records.

PubMed

Jain, Viral G; Greco, Peter J; Kaelber, David C

2017-03-08

Code status (CS) of a patient (part of their end-of-life wishes) can be critical information in healthcare delivery, which can change over time, especially at transitions of care. Although electronic health record (EHR) tools exist for medication reconciliation across transitions of care, much less attention is given to CS, and standard EHR tools have not been implemented for CS reconciliation (CSR). Lack of CSR creates significant potential patient safety and quality of life issues. To study the tools, workflow, and impact of clinical decision support (CDS) for CSR. We established rules for CS implementation in our EHR. At admission, a CS is required as part of a patient's admission order set. Using standard CDS tools in our EHR, we built an interruptive alert for CSR at discharge if a patient did not have the same inpatient (current) CS at discharge as that prior to admission CS. Of 80,587 admissions over a four year period (2 years prior to and post CSR implementation), CS discordance was seen in 3.5% of encounters which had full code status prior to admission, but Do Not Resuscitate (DNR) CS at discharge. In addition, 1.4% of the encounters had a different variant of the DNR CS at discharge when compared with CS prior to admission. On pre-post CSR implementation analysis, DNR CS per 1000 admissions per month increased significantly among patients discharged and in patients being admitted (mean ± SD: 85.36 ± 13.69 to 399.85 ± 182.86, p<0.001; and 1.99 ± 1.37 vs 16.70 ± 4.51, p<0.001, respectively). EHR enabled CSR is effective and represents a significant informatics opportunity to help honor patients' end-of-life wishes. CSR represents one example of non-medication reconciliation at transitions of care that should be considered in all EHRs to improve care quality and patient safety.

Language does not come "in boxes": Assessing discrepancies between adverse drug reactions spontaneous reporting and MedDRA® codes in European Portuguese.

PubMed

Inácio, Pedro; Airaksinen, Marja; Cavaco, Afonso

2015-01-01

The description of adverse drug reactions (ADRs) by health care professionals (HCPs) can be highly variable. This variation can affect the coding of a reaction with the Medical Dictionary for Regulatory Activities (MedDRA(®)), the gold standard for pharmacovigilance database entries. Ultimately, the strength of a safety signal can be compromised. The objective of this study was to assess: 1) participation of different HCPs in ADR reporting, and 2) variation of language used by HCPs when describing ADRs, and to compare it with the corresponding MedDRA(®) codes. A retrospective content analysis was performed, using the database of spontaneous reports submitted by HCPs in the region of the Southern Pharmacovigilance Unit, Portugal. Data retrieved consisted of the idiomatic description of all ADRs occurring in 2004 (first year of the Unit activity, n = 53) and in 2012 (n = 350). The agreement between the language used by HCPs and the MedDRA(®) dictionary codes was quantitatively assessed. From a total of 403 spontaneous reports received in the two years, 896 words describing ADRs were collected. HCPs presented different levels of pharmacovigilance participation and ADR idiomatic descriptions, with pharmacists providing the greatest overall contribution. The agreement between the language used in spontaneous reports and the corresponding MedDRA(®) terms varied by HCP background, with nurses presenting the poorer results than medical doctors and pharmacists when considering the dictionary as the gold standard in ADRs' language. Lexical accuracy and semantic variations exist between different HCP groups. These differences may interfere with the strength of a generated safety signal. Clinical and MedDRA(®) terminology training should be targeted to increase not only the frequency, but also the quality of spontaneous reports, in accordance with HCPs' experience and background. Copyright © 2015 Elsevier Inc. All rights reserved.

Systematic void fraction studies with RELAP5, FRANCESCA and HECHAN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stosic, Z.; Preusche, G.

1996-08-01

In enhancing the scope of standard thermal-hydraulic codes applications beyond its capabilities, i.e. coupling with a one and/or three-dimensional kinetics core model, the void fraction, transferred from thermal-hydraulics to the core model, plays a determining role in normal operating range and high core flow, as the generated heat and axial power profiles are direct functions of void distribution in the core. Hence, it is very important to know if the void quality models in the programs which have to be coupled are compatible to allow the interactive exchange of data which are based on these constitutive void-quality relations. The presentedmore » void fraction study is performed in order to give the basis for the conclusion whether a transient core simulation using the RELAP5 void fractions can calculate the axial power shapes adequately. Because of that, the void fractions calculated with RELAP5 are compared with those calculated by BWR safety code for licensing--FRANCESCA and the best estimate model for pre- and post-dryout calculation in BWR heated channel--HECHAN. In addition, a comparison with standard experimental void-quality benchmark tube data is performed for the HECHAN code.« less

A comparison of IBC with 1997 UBC for modal response spectrum analysis in standard-occupancy buildings

NASA Astrophysics Data System (ADS)

Nahhas, Tariq M.

2011-03-01

This paper presents a comparison of the seismic forces generated from a Modal Response Spectrum Analysis (MRSA) by applying the provisions of two building codes, the 1997 Uniform Building Code (UBC) and the 2000-2009 International Building Code (IBC), to the most common ordinary residential buildings of standard occupancy. Considering IBC as the state of the art benchmark code, the primary concern is the safety of buildings designed using the UBC as compared to those designed using the IBC. A sample of four buildings with different layouts and heights was used for this comparison. Each of these buildings was assumed to be located at four different geographical sample locations arbitrarily selected to represent various earthquake zones on a seismic map of the USA, and was subjected to code-compliant response spectrum analyses for all sample locations and for five different soil types at each location. Response spectrum analysis was performed using the ETABS software package. For all the cases investigated, the UBC was found to be significantly more conservative than the IBC. The UBC design response spectra have higher spectral accelerations, and as a result, the response spectrum analysis provided a much higher base shear and moment in the structural members as compared to the IBC. The conclusion is that ordinary office and residential buildings designed using UBC 1997 are considered to be overdesigned, and therefore they are quite safe even according to the IBC provisions.

The future of the OSHA PSM standard.

PubMed

Kaelin, David E

2014-07-01

The significance of the proposed PSM changes could be to greatly expand coverage of processes in order to include many not currently covered by the PSM regulation. New chemicals will likely be added to Appendix A, and reactive chemicals (a definition will be needed) also may be covered. What exactly will be the definition of a reactive chemical is unclear at this time, although definitions used in New Jersey in the TCPA Act may guide OSHA. It is likely that atmospheric storage of flammable liquids will be included more specifically and the exemption of these tanks eliminated. In applying RAGAGEP, sites may be required to apply the most recent codes and standards to covered processes, perhaps at the time of PHA auditing: A narrowing of the PSM exemption for retail facilities could bring many of them under the PSM regulation at some level. Process safety management practices should be applied to all facilities that store and process hazardous materials that have fire, explosion, reactivity, and toxic properties. If changes are made to the PSM regulation, many new sites will be covered and will need to formally adopt PSM as defined in the OSHA regulation. The addition of reactive chemicals to the PSM regulation will greatly expand the number of processes covered by the regulation. Keeping up with the most current codes, standards, and legislative changes is a daunting task that may require the support of specialists. The results of the proposed legislation will be an increase in the level of process safety excellence throughout the chemical industries.

Industry and Occupation in the Electronic Health Record: An Investigation of the National Institute for Occupational Safety and Health Industry and Occupation Computerized Coding System

PubMed Central

2016-01-01

Background Inclusion of information about a patient’s work, industry, and occupation, in the electronic health record (EHR) could facilitate occupational health surveillance, better health outcomes, prevention activities, and identification of workers’ compensation cases. The US National Institute for Occupational Safety and Health (NIOSH) has developed an autocoding system for “industry” and “occupation” based on 1990 Bureau of Census codes; its effectiveness requires evaluation in conjunction with promoting the mandatory addition of these variables to the EHR. Objective The objective of the study was to evaluate the intercoder reliability of NIOSH’s Industry and Occupation Computerized Coding System (NIOCCS) when applied to data collected in a community survey conducted under the Affordable Care Act; to determine the proportion of records that are autocoded using NIOCCS. Methods Standard Occupational Classification (SOC) codes are used by several federal agencies in databases that capture demographic, employment, and health information to harmonize variables related to work activities among these data sources. There are 359 industry and occupation responses that were hand coded by 2 investigators, who came to a consensus on every code. The same variables were autocoded using NIOCCS at the high and moderate criteria level. Results Kappa was .84 for agreement between hand coders and between the hand coder consensus code versus NIOCCS high confidence level codes for the first 2 digits of the SOC code. For 4 digits, NIOCCS coding versus investigator coding ranged from kappa=.56 to .70. In this study, NIOCCS was able to achieve production rates (ie, to autocode) 31%-36% of entered variables at the “high confidence” level and 49%-58% at the “medium confidence” level. Autocoding (production) rates are somewhat lower than those reported by NIOSH. Agreement between manually coded and autocoded data are “substantial” at the 2-digit level, but only “fair” to “good” at the 4-digit level. Conclusions This work serves as a baseline for performance of NIOCCS by investigators in the field. Further field testing will clarify NIOCCS effectiveness in terms of ability to assign codes and coding accuracy and will clarify its value as inclusion of these occupational variables in the EHR is promoted. PMID:26878932

CONFERENCE REPORT: Summary of the 8th IAEA Technical Meeting on Fusion Power Plant Safety

NASA Astrophysics Data System (ADS)

Girard, J. Ph.; Gulden, W.; Kolbasov, B.; Louzeiro-Malaquias, A.-J.; Petti, D.; Rodriguez-Rodrigo, L.

2008-01-01

Reports were presented covering a selection of topics on the safety of fusion power plants. These included a review on licensing studies developed for ITER site preparation surveying common and non-common issues (i.e. site dependent) as lessons to a broader approach for fusion power plant safety. Several fusion power plant models, spanning from accessible technology to more advanced-materials based concepts, were discussed. On the topic related to fusion-specific technology, safety studies were reported on different concepts of breeding blanket modules, tritium handling and auxiliary systems under normal and accident scenarios' operation. The testing of power plant relevant technology in ITER was also assessed in terms of normal operation and accident scenarios, and occupational doses and radioactive releases under these testings have been determined. Other specific safety issues for fusion have also been discussed such as availability and reliability of fusion power plants, dust and tritium inventories and component failure databases. This study reveals that the environmental impact of fusion power plants can be minimized through a proper selection of low activation materials and using recycling technology helping to reduce waste volume and potentially open the route for its reutilization for the nuclear sector or even its clearance into the commercial circuit. Computational codes for fusion safety have been presented in support of the many studies reported. The on-going work on establishing validation approaches aiming at improving the prediction capability of fusion codes has been supported by experimental results and new directions for development have been identified. Fusion standards are not available and fission experience is mostly used as the framework basis for licensing and target design for safe operation and occupational and environmental constraints. It has been argued that fusion can benefit if a specific fusion approach is implemented, in particular for materials selection which will have a large impact on waste disposal and recycling and in the real limits of radiation releases if indexed to the real impact on individuals and the environment given the differences in the types of radiation emitted by tritium when compared with the fission products. Round table sessions resulted in some common recommendations. The discussions also created the awareness of the need for a larger involvement of the IAEA in support of fusion safety standards development.

29 CFR 1910.144 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the basic color for the identification of: (i) Fire protection equipment and apparatus. [Reserved] (ii... 29 Labor 5 2011-07-01 2011-07-01 false Safety color code for marking physical hazards. 1910.144 Section 1910.144 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

Joint China-United States Report for Year 1 Insulation Materials and Systems Project Area Clean Energy Research Center Building Energy Efficiency (CERC-BEE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stovall, Therese K; Biswas, Kaushik; Song, Bo

In November of 2009, the presidents of China and the U.S. announced the establishment of the Clean Energy Research Center (CERC). This broad research effort is co-funded by both countries and involves a large number of research centers and universities in both countries. One part of this program is focused on improving the energy efficiency of buildings. One portion of the CERC-BEE was focused on building insulation systems. The research objective of this effort was to Identify and investigate candidate high performance fire resistant building insulation technologies that meet the goal of building code compliance for exterior wall applications inmore » green buildings in multiple climate zones. A Joint Work Plan was established between researchers at the China Academy of Building Research and Oak Ridge National Laboratory. Efforts in the first year under this plan focused on information gathering. The objective of this research program is to reduce building energy use in China via improved building insulation technology. In cold regions in China, residents often use inefficient heating systems to provide a minimal comfort level within inefficient buildings. In warmer regions, air conditioning has not been commonly used. As living standards rise, energy consumption in these regions will increase dramatically unless significant improvements are made in building energy performance. Previous efforts that defined the current state of the built environment in China and in the U.S. will be used in this research. In countries around the world, building improvements have typically followed the implementation of more stringent building codes. There have been several changes in building codes in both the U.S. and China within the last few years. New U.S. building codes have increased the amount of wall insulation required in new buildings. New government statements from multiple agencies in China have recently changed the requirements for buildings in terms of energy efficiency and fire safety. A related issue is the degree to which new standards are adopted and enforced. In the U.S., standards are developed using a consensus process, and local government agencies are free to implement these standards or to ignore them. For example, some U.S. states are still using 2003 versions of the building efficiency standards. There is also a great variation in the degree to which the locally adopted standards are enforced in different U.S. cities and states. With a more central process in China, these issues are different, but possible impacts of variable enforcement efficacy may also exist. Therefore, current building codes in China will be compared to the current state of building fire-safety and energy-efficiency codes in the U.S. and areas for possible improvements in both countries will be explored. In particular, the focus of the applications in China will be on green buildings. The terminology of 'green buildings' has different meanings to different audiences. The U.S. research is interested in both new, green buildings, and on retrofitting existing inefficient buildings. An initial effort will be made to clarify the scope of the pertinent wall insulation systems for these applications.« less

Design-Load Basis for LANL Structures, Systems, and Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

I. Cuesta

2004-09-01

This document supports the recommendations in the Los Alamos National Laboratory (LANL) Engineering Standard Manual (ESM), Chapter 5--Structural providing the basis for the loads, analysis procedures, and codes to be used in the ESM. It also provides the justification for eliminating the loads to be considered in design, and evidence that the design basis loads are appropriate and consistent with the graded approach required by the Department of Energy (DOE) Code of Federal Regulation Nuclear Safety Management, 10, Part 830. This document focuses on (1) the primary and secondary natural phenomena hazards listed in DOE-G-420.1-2, Appendix C, (2) additional loadsmore » not related to natural phenomena hazards, and (3) the design loads on structures during construction.« less

Self-regulation of motor vehicle advertising: is it working in Australia?

PubMed

Donovan, Robert J; Fielder, Lynda J; Ouschan, Robyn; Ewing, Michael

2011-05-01

There is growing concern that certain content within motor vehicle advertising may have a negative influence on driving attitudes and behaviours of viewers, particularly young people, and hence a negative impact on road safety. In response, many developed countries have adopted a self-regulatory approach to motor vehicle advertising. However, it appears that many motor vehicle advertisements in Australia and elsewhere are not compliant with self-regulatory codes. Using standard commercial advertising methods, we exposed three motor vehicle ads that had been the subject of complaints to the Australian Advertising Standards Board (ASB) to, N = 463, 14-55 year olds to assess the extent to which their perceptions of the content of the ads communicated themes that were contrary to the Australian self-regulatory code. All three ads were found to communicate messages contrary to the code (such as the vehicle's speed and acceleration capabilities). However, the ASB had upheld complaints about only one of the ads. Where motor vehicle advertising regulatory frameworks exist to guide motor vehicle advertisers as to what is and what is not acceptable in their advertising, greater efforts are needed to ensure compliance with these codes. One way may be to make it mandatory for advertisers to report consumer pre-testing of their advertising to ensure that undesirable messages are not being communicated to viewers. Copyright © 2010 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tendera, P.

At present there are two NPPs equipped with PWR units in Czech Republic. The Dukovany NPP is about ten years in operation (four units 440 MW - WWER model 213) and Temelin NPP is under construction (two units 1000 MW-WWER model 320). Both NPPs were built to Soviet design and according to Soviet regulations and standards but most of equipment for primary circuits was supplied by home manufactures. The objective for the Czech LBB programme is to prove the LBB status of the primary piping systems of these NPPs and the LBB concept is a part of strategy to meetmore » western style safety standards. The reason for the Czech LBB project is a lack of some standard safety facilities, too. For both Dukovany and Temolin NPPs a full LBB analysis should be carried out. The application of LBB to the piping system should be also a cost effective means to avoid installations of pipe whip restraints and jet shields. The Czech regulatory body issued non-mandatory requirement {open_quotes}Leak Before Break{close_quotes} which is in compliance with national legal documents and which is based on the US NRC Regulatory Procedures and US standards (ASME, CODE, ANSI). The requirement has been published in the document {open_quotes}Safety of Nuclear Facilities{close_quotes} No. 1/1991 as {open_quotes}Requirements on the Content and Format of Safety Reports and their Supplements{close_quotes} and consists of two parts (1) procedure for obtaining proof of evidence {open_quotes}Leak Before Break{close_quotes} (2) leak detection systems for the pressurized reactor primary circuit. At present some changes concerning both parts of the above document will be introduced. The reasons for this modifications will be presented.« less

Monitoring the safety of quadrivalent human papillomavirus vaccine: findings from the Vaccine Safety Datalink.

PubMed

Gee, Julianne; Naleway, Allison; Shui, Irene; Baggs, James; Yin, Ruihua; Li, Rong; Kulldorff, Martin; Lewis, Edwin; Fireman, Bruce; Daley, Matthew F; Klein, Nicola P; Weintraub, Eric S

2011-10-26

In 7 large managed care organizations (MCOs), we performed a post-licensure safety assessment of quadrivalent human papillomavirus vaccine (HPV4) among 9-26 year-old female vaccine recipients between August 2006 and October 2009. Sequential analyses were conducted weekly to detect associations between HPV4 exposure and pre-specified outcomes. The pre-specified outcomes identified by ICD-9 codes using computerized data at the participating MCOs included: Guillan-Barré Syndrome (GBS), stroke, venous thromboembolism (VTE), appendicitis, seizures, syncope, allergic reactions, and anaphylaxis. For rare outcomes, historical background rates were used as the comparison group. For more common outcomes, a concurrent unexposed comparison group was utilized. A standardized review of medical records was conducted for all cases of GBS, VTE, and anaphylaxis. A total of 600,558 HPV4 doses were administered during the study period. We found no statistically significant increased risk for the outcomes studied. However, a non-statistically significant relative risk (RR) for VTE ICD-9 codes following HPV4 vaccination of 1.98 was detected among females age 9-17 years. Medical record review of all 8 vaccinated potential VTE cases in this age group revealed that 5 met the standard case definition for VTE. All 5 confirmed cases had known risk factors for VTE (oral contraceptive use, coagulation disorders, smoking, obesity or prolonged hospitalization). In a study of over 600,000 HPV4 vaccine doses administered, no statistically significant increased risk for any of the pre-specified adverse events after vaccination was detected. Further study of a possible association with VTE following HPV4 vaccination is warranted. Published by Elsevier Ltd.

Natural Gas Vehicle Cylinder Safety, Training and Inspection Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hank Seiff

2008-12-31

Under the auspices of the National Energy Technology Laboratory and the US Department of Energy, the Clean Vehicle Education Foundation conducted a three-year program to increase the understanding of the safe and proper use and maintenance of vehicular compressed natural gas (CNG) fuel systems. High-pressure fuel systems require periodic inspection and maintenance to insure safe and proper operation. The project addressed the needs of CNG fuel containers (cylinders) and associated high-pressure fuel system components related to existing law, codes and standards (C&S), available training and inspection programs, and assured coordination among vehicle users, public safety officials, fueling station operators andmore » training providers. The program included a public and industry awareness campaign, establishment and administration of a cylinder inspector certification training scholarship program, evaluation of current safety training and testing practices, monitoring and investigation of CNG vehicle incidents, evaluation of a cylinder recertification program and the migration of CNG vehicle safety knowledge to the nascent hydrogen vehicle community.« less

International laser-safety regulations: a status update

NASA Astrophysics Data System (ADS)

Weiner, Robert M.

1990-07-01

There is an increase in international laser safety requirements as part of the emphasis on world-wide standardization of products and regulations. In particular the documents which will evolve from the 1992 consolidation efforts of the European Community (EC) will impact both laser manufacturers and users. This paper provides a discussion of the current status of the various laser radiation standards. NORTH AMERICAN REQUIREMENTS United States Requirements on manufacturers from the Food and Drug Administration (FDA) have been in effect since 1975. The Center for Devices and Radiological Health (CDRH) within that agency ensures that these mandatory requirements [1] are satisfied. The CDRH regulations include the division of products into classes depending on their potential for hazard criteria for power measurement and requirements for product features labels and manuals and records and reports. Manufacturers must test products and certify that they comply with the CDRH requirements. User requirements are found in a standard published by the American National Standards Institute (ANSI) and in requirements from several individual states. Specific ANSI standards have also been published for fiber communications systems [34] and for lasers in medical applications [35]. Please note that the Appendix includes additional information on the standards discussed in this paper including sources for obtaining the documents. Canada In the past Canada has had requirements for two specified product categories (bar code scanners and educational lasers) [26 These will be replaced

75 FR 19944 - International Code Council: The Update Process for the International Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... for Residential Construction in High Wind Areas. ICC 700: National Green Building Standard. The... Codes and Standards that are comprehensive, coordinated, and necessary to regulate the built environment... International Codes and Standards consist of the following: ICC Codes International Building Code. International...

42 CFR 482.41 - Condition of participation: Physical environment.

Code of Federal Regulations, 2013 CFR

2013-10-01

...: Life safety from fire. (1) Except as otherwise provided in this section— (i) The hospital must meet the applicable provisions of the 2000 edition of the Life Safety Code of the National Fire Protection Association... Life Safety Code, issued January 14, 2000, for incorporation by reference in accordance with 5 U.S.C...

42 CFR 482.41 - Condition of participation: Physical environment.

Code of Federal Regulations, 2014 CFR

2014-10-01

...: Life safety from fire. (1) Except as otherwise provided in this section— (i) The hospital must meet the applicable provisions of the 2000 edition of the Life Safety Code of the National Fire Protection Association... Life Safety Code, issued January 14, 2000, for incorporation by reference in accordance with 5 U.S.C...

The nuts and bolts of pills and portions: the functions of a drug safety working group.

PubMed

Nath, Noleen S; Jones, Ellen H; Stride, Peter; Premaratne, Manuja; Thaker, Darshit; Lim, Ivan

2011-11-01

Hospitalised patients commonly experience adverse drug events (ADEs) and medication errors. Runciman reported that ADEs in hospitals account for 20% of reported adverse events and contribute to 27% of deaths where death followed an adverse event. Hughes recommends multidisciplinary hospital drug committees to assess performance and raise standards. The new Code of Conduct of the Medical Board of Australia recommends participation in systems for surveillance and monitoring of adverse events, and to improve patient safety. We describe the functions and role of a Drug Safety Working Group (DSWG) in a suburban hospital, which aims to audit and promote a culture of prescribing and medication administration that is prudent and cautious to minimise the risk of harm to patients. We believe that regular prescription monitoring and feedback to Resident Medical Officers (RMOs) improves medication management in our hospital.

DOE Hydrogen Program: 2006 Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milliken, J.

This report summarizes comments from the Peer Review Panel at the FY 2006 DOE Hydrogen Program Annual Merit Review, held on May 16-19, 2006, in Arlington, Virginia. The projects evaluated support the Department of Energy and President Bush's Hydrogen Initiative. The results of this merit review and peer evaluation are major inputs used by DOE to make funding decisions. Project areas include hydrogen production and delivery; hydrogen storage; fuel cells; technology validation; safety, codes and standards; education; and systems analysis.

DOE Hydrogen Program: 2005 Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chalk, S. G.

This report summarizes comments from the Peer Review Panel at the FY 2005 DOE Hydrogen Program Annual Merit Review, held on May 23-26, 2005, in Arlington, Virginia. The projects evaluated support the Department of Energy and President Bush's Hydrogen Initiative. The results of this merit review and peer evaluation are major inputs used by DOE to make funding decisions. Project areas include hydrogen production and delivery; hydrogen storage; fuel cells; technology validation; safety, codes and standards; education; and systems analysis.

DOE Hydrogen Program: 2007 Annual Merit Review and Peer Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milliken, J.

This report summarizes comments from the Peer Review Panel at the FY 2007 DOE Hydrogen Program Annual Merit Review, held on May 14-18, 2007, in Washington, D.C. The projects evaluated support the Department of Energy and President Bush's Hydrogen Initiative. The results of this merit review and peer evaluation are major inputs used by DOE to make funding decisions. Project areas include hydrogen production and delivery; hydrogen storage; fuel cells; technology validation; safety, codes and standards; education; and systems analysis.

Qualification of safety-related electrical equipment in France. Methods, approach and test facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raimondo, E.; Capman, J.L.; Herovard, M.

1985-05-01

Requirements for qualification of electrical equipment used in French-built nuclear power plants are stated in a national code, the RCC-E, or Regles de Construction et de Conception des Materiels Electriques. Under the RCC-E, safety related equipment is assigned to one of three different categories, according to location in the plant and anticipated normal, accident and post-accident behavior. Qualification tests differ for each category and procedures range in scope from the standard seismic test to the highly stringent VISA program, which specifies a predetermined sequence of aging, radiation, seismic and simulated accident testing. A network of official French test facilities wasmore » developed specifically to meet RCC-E requirements.« less

Implementation of ASME Code, Section XI, Code Case N-770, on Alternative Examination Requirements for Class 1 Butt Welds Fabricated with Alloy 82/182

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, Edmund J.; Anderson, Michael T.

In May 2010, the NRC issued a proposed notice of rulemaking that includes a provision to add a new section to its rules to require licensees to implement ASME Code Case N-770, ‘‘Alternative Examination Requirements and Acceptance Standards for Class 1 PWR Piping and Vessel Nozzle Butt Welds Fabricated with UNS N06082 or UNS W86182 Weld Filler Material With or Without the Application of Listed Mitigation Activities, Section XI, Division 1,’’ with 15 conditions. Code Case N-770 contains baseline and inservice inspection (ISI) requirements for unmitigated butt welds fabricated with Alloy 82/182 material and preservice and ISI requirements for mitigatedmore » butt welds. The NRC stated that application of ASME Code Case N-770 is necessary because the inspections currently required by the ASME Code, Section XI, were not written to address stress corrosion cracking Alloy 82/182 butt welds, and the safety consequences of inadequate inspections can be significant. The NRC expects to issue the final rule incorporating this code case into its regulations in the spring 2011 time frame. This paper discusses the new examination requirements, the conditions that NRC is imposing , and the major concerns with implementation of the new Code Case.« less

FDA adverse Event Problem Codes: standardizing the classification of device and patient problems associated with medical device use.

PubMed

Reed, Terrie L; Kaufman-Rivi, Diana

2010-01-01

The broad array of medical devices and the potential for device failures, malfunctions, and other adverse events associated with each device creates a challenge for public health device surveillance programs. Coding reported events by type of device problem provides one method for identifying a potential signal of a larger device issue. The Food and Drug Administration's (FDA) Center for Devices and Radiological Health (CDRH) Event Problem Codes that are used to report adverse events previously lacked a structured set of controls for code development and maintenance. Over time this led to inconsistent, ambiguous, and duplicative concepts being added to the code set on an ad-hoc basis. Recognizing the limitation of its coding system the FDA set out to update the system to improve its usefulness within FDA and as a basis of a global standard to identify important patient and device outcomes throughout the medical community. In 2004, FDA and the National Cancer Institute (NCI) signed a Memorandum of Understanding (MOU) whereby NCI agreed to provide terminology development and maintenance services to all FDA Centers. Under this MOU, CDRH's Office of Surveillance and Biometrics (OSB) convened a cross-Center workgroup and collaborated with staff at NCI Enterprise Vocabulary Service (EVS) to streamline the Patient and Device Problem Codes and integrate them into the NCI Thesaurus and Meta-Thesaurus. This initiative included many enhancements to the Event Problem Codes aimed at improving code selection as well as improving adverse event report analysis. LIMITATIONS & RECOMMENDATIONS: Staff resources, database concerns, and limited collaboration with external groups in the initial phases of the project are discussed. Adverse events associated with medical device use can be better understood when they are reported using a consistent and well-defined code set. This FDA initiative was an attempt to improve the structure and add control mechanisms to an existing code set, improve analysis tools that will better identify device safety trends, and improve the ability to prevent or mitigate effects of adverse events associated with medical device use.

An Open Source Rapid Computer Aided Control System Design Toolchain Using Scilab, Scicos and RTAI Linux

NASA Astrophysics Data System (ADS)

Bouchpan-Lerust-Juéry, L.

2007-08-01

Current and next generation on-board computer systems tend to implement real-time embedded control applications (e.g. Attitude and Orbit Control Subsystem (AOCS), Packet Utililization Standard (PUS), spacecraft autonomy . . . ) which must meet high standards of Reliability and Predictability as well as Safety. All these requirements require a considerable amount of effort and cost for Space Sofware Industry. This paper, in a first part, presents a free Open Source integrated solution to develop RTAI applications from analysis, design, simulation and direct implementation using code generation based on Open Source and in its second part summarises this suggested approach, its results and the conclusion for further work.

The U.S. Commercial Air Tour Industry: A Review of Aviation Safety Concerns

PubMed Central

Ballard, Sarah-Blythe

2016-01-01

The U.S. Title 14 Code of Federal Regulations defines commercial air tours as “flight[s] conducted for compensation or hire in an airplane or helicopter where a purpose of the flight is sightseeing.” The incidence of air tour crashes in the United States is disproportionately high relative to similar commercial aviation operations, and air tours operating under Part 91 governance crash significantly more than those governed by Part 135. This paper reviews the government and industry response to four specific areas of air tour safety concern: surveillance of flight operations, pilot factors, regulatory standardization, and maintenance quality assurance. It concludes that the government and industry have successfully addressed many of these tenet issues, most notably by: advancing the operations surveillance infrastructure through implementation of en route, ground-based, and technological surveillance methods; developing Aeronautical Decision Making and cue-based training programs for air tour pilots; consolidating federal air tour regulations under Part 136; and developing public-private partnerships for raising maintenance operating standards and improving quality assurance programs. However, opportunities remain to improve air tour safety by: increasing the number and efficiency of flight surveillance programs; addressing pilot fatigue with more restrictive flight hour limitations for air tour pilots; ensuring widespread uptake of maintenance quality assurance programs, especially among high-risk operators not currently affiliated with private air tour safety programs; and eliminating the 25-mile exception allowing Part 91 operators to conduct commercial air tours without the safety oversight required of Part 135 operators. PMID:24597160

The U.S. commercial air tour industry: a review of aviation safety concerns.

PubMed

Ballard, Sarah-Blythe

2014-02-01

The U.S. Title 14 Code of Federal Regulations defines commercial air tours as "flight[s] conducted for compensation or hire in an airplane or helicopter where a purpose of the flight is sightseeing." The incidence of air tour crashes in the United States is disproportionately high relative to similar commercial aviation operations, and air tours operating under Part 91 governance crash significantly more than those governed by Part 135. This paper reviews the government and industry response to four specific areas of air tour safety concern: surveillance of flight operations, pilot factors, regulatory standardization, and maintenance quality assurance. It concludes that the government and industry have successfully addressed many of these tenet issues, most notably by: advancing the operations surveillance infrastructure through implementation of en route, ground-based, and technological surveillance methods; developing Aeronautical Decision Making and cue-based training programs for air tour pilots; consolidating federal air tour regulations under Part 136; and developing public-private partnerships for raising maintenance operating standards and improving quality assurance programs. However, opportunities remain to improve air tour safety by: increasing the number and efficiency of flight surveillance programs; addressing pilot fatigue with more restrictive flight hour limitations for air tour pilots; ensuring widespread uptake of maintenance quality assurance programs, especially among high-risk operators not currently affiliated with private air tour safety programs; and eliminating the 25-mile exception allowing Part 91 operators to conduct commercial air tours without the safety oversight required of Part 135 operators.

Alternative Fuels Data Center: Codes and Standards Basics

Science.gov Websites

, the American National Standards Institute regulates how organizations publish codes and standards standards. Legal Enforcement Codes and standards are legally enforceable when jurisdictions adopt them by reference or direct incorporation into their regulations. When jurisdictions adopt codes, they also adopt

Study on Full Supply Chain Quality and Safetytraceability Systems For Cereal And Oilproducts

NASA Astrophysics Data System (ADS)

Liu, Shihong; Zheng, Huoguo; Meng, Hong; Hu, Haiyan; Wu, Jiangshou; Li, Chunhua

Global food industry and Governments in many countries are putting increasing emphasis on establishment of food traceability systems. Food traceability has become an effective way in food safety management. Aimed at the major quality problems of cereal and oil products existing in the production, processing, warehousing, distribution and other links in the supply chain, this paper firstly proposes a new traceability framework combines the information flow with critical control points and quality indicators. Then it introduces traceability database design and data access mode to realize the framework. In practice, Code design for tracing goods is a challenge thing, so this paper put forward a code system based on UCC/EAN-128 standard.Middleware and Electronic terminal design are also briefly introduced to accomplish traceability system for cereal and oil products.

Technical Support Document for Version 3.4.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2007-09-14

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.« less

The case of the high-risk safety product.

PubMed

Chew, W B; Blodgett, T B; Wallin, W R; Meyers, G C; Holden, B; Johnson, E W; Smith, N C; Ducker, W

1992-01-01

After several days of meetings, J.F. Winchester, president of MDC Industries, felt no closer to a decision. MDC, a manufacturer of wall and ceiling panels, was considering whether to exercise an option to buy a new and safer wallboard technology. The product was being touted as revolutionary, but, Winchester wondered, could MDC afford to carry the flag? According to its inventor, Robert Goerner, Smoke-Safe would be a vast improvement over standard safety-rated wallboard. With almost the same flame-retardant properties, Smoke-Safe had the advantage of giving off almost no fumes or smoke in fire tests. And, Winchester knew, most fire-related deaths are from smoke, not flames. Indeed, the numbers were grimly persuasive: 82% of fire-related injuries involving standard panels were caused by smoke inhalation. What's more, Smoke-Safe would cost about the same to manufacture as MDC's current wallboard. But MDC had several other good options for spending the $5 million Goerner was asking; building plastics was only one of its profit centers. And the prospect of launching a campaign to change building codes in order to market Smoke-Safe, which could spark a fight with competitors, was daunting. Since its current wallboard gave MDC only 18% of the wallboard market, many industry insiders speculated whether MDC had the market clout to influence major cities to revise their codes. Six experts in marketing, law, and ethics advise MDC Industries on how it can balance ethical and business imperatives in making its decision.

RDS - A systematic approach towards system thermal hydraulics input code development for a comprehensive deterministic safety analysis

NASA Astrophysics Data System (ADS)

Salim, Mohd Faiz; Roslan, Ridha; Ibrahim, Mohd Rizal Mamat @

2014-02-01

Deterministic Safety Analysis (DSA) is one of the mandatory requirements conducted for Nuclear Power Plant licensing process, with the aim of ensuring safety compliance with relevant regulatory acceptance criteria. DSA is a technique whereby a set of conservative deterministic rules and requirements are applied for the design and operation of facilities or activities. Computer codes are normally used to assist in performing all required analysis under DSA. To ensure a comprehensive analysis, the conduct of DSA should follow a systematic approach. One of the methodologies proposed is the Standardized and Consolidated Reference Experimental (and Calculated) Database (SCRED) developed by University of Pisa. Based on this methodology, the use of Reference Data Set (RDS) as a pre-requisite reference document for developing input nodalization was proposed. This paper shall describe the application of RDS with the purpose of assessing its effectiveness. Two RDS documents were developed for an Integral Test Facility of LOBI-MOD2 and associated Test A1-83. Data and information from various reports and drawings were referred in preparing the RDS. The results showed that by developing RDS, it has made possible to consolidate all relevant information in one single document. This is beneficial as it enables preservation of information, promotes quality assurance, allows traceability, facilitates continuous improvement, promotes solving of contradictions and finally assisting in developing thermal hydraulic input regardless of whichever code selected. However, some disadvantages were also recognized such as the need for experience in making engineering judgments, language barrier in accessing foreign information and limitation of resources. Some possible improvements are suggested to overcome these challenges.

78 FR 18321 - International Code Council: The Update Process for the International Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... for Residential Construction in High Wind Regions. ICC 700: National Green Building Standard The..., coordinated, and necessary to regulate the built environment. Federal agencies frequently use these codes and... International Codes and Standards consist of the following: ICC Codes International Building Code. International...

Qualification of Simulation Software for Safety Assessment of Sodium Cooled Fast Reactors. Requirements and Recommendations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Nicholas R.; Pointer, William David; Sieger, Matt

2016-04-01

The goal of this review is to enable application of codes or software packages for safety assessment of advanced sodium-cooled fast reactor (SFR) designs. To address near-term programmatic needs, the authors have focused on two objectives. First, the authors have focused on identification of requirements for software QA that must be satisfied to enable the application of software to future safety analyses. Second, the authors have collected best practices applied by other code development teams to minimize cost and time of initial code qualification activities and to recommend a path to the stated goal.

Code development for ships -- A demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ayyub, B.; Mansour, A.E.; White, G.

1996-12-31

A demonstration summary of a reliability-based structural design code for ships is presented for two ship types, a cruiser and a tanker. For both ship types, code requirements cover four failure modes: hull girder bulking, unstiffened plate yielding and buckling, stiffened plate buckling, and fatigue of critical detail. Both serviceability and ultimate limit states are considered. Because of limitation on the length, only hull girder modes are presented in this paper. Code requirements for other modes will be presented in future publication. A specific provision of the code will be a safety check expression. The design variables are to bemore » taken at their nominal values, typically values in the safe side of the respective distributions. Other safety check expressions for hull girder failure that include load combination factors, as well as consequence of failure factors, are considered. This paper provides a summary of safety check expressions for the hull girder modes.« less

Modernizing the ATLAS simulation infrastructure

NASA Astrophysics Data System (ADS)

Di Simone, A.; CollaborationAlbert-Ludwigs-Universitt Freiburg, ATLAS; Institut, Physikalisches; Br., 79104 Freiburg i.; Germany

2017-10-01

The ATLAS Simulation infrastructure has been used to produce upwards of 50 billion proton-proton collision events for analyses ranging from detailed Standard Model measurements to searches for exotic new phenomena. In the last several years, the infrastructure has been heavily revised to allow intuitive multithreading and significantly improved maintainability. Such a massive update of a legacy code base requires careful choices about what pieces of code to completely rewrite and what to wrap or revise. The initialization of the complex geometry was generalized to allow new tools and geometry description languages, popular in some detector groups. The addition of multithreading requires Geant4-MT and GaudiHive, two frameworks with fundamentally different approaches to multithreading, to work together. It also required enforcing thread safety throughout a large code base, which required the redesign of several aspects of the simulation, including truth, the record of particle interactions with the detector during the simulation. These advances were possible thanks to close interactions with the Geant4 developers.

Technical Support Document for Version 3.9.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2011-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.« less

Technical Support Document for Version 3.9.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2012-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.« less

Using Modified-ISS Model to Evaluate Medication Administration Safety During Bar Code Medication Administration Implementation in Taiwan Regional Teaching Hospital.

PubMed

Ma, Pei-Luen; Jheng, Yan-Wun; Jheng, Bi-Wei; Hou, I-Ching

2017-01-01

Bar code medication administration (BCMA) could reduce medical errors and promote patient safety. This research uses modified information systems success model (M-ISS model) to evaluate nurses' acceptance to BCMA. The result showed moderate correlation between medication administration safety (MAS) to system quality, information quality, service quality, user satisfaction, and limited satisfaction.

Further Analysis of Motorcycle Helmet Effectiveness Using CODES Linked Data

DOT National Transportation Integrated Search

1998-01-01

Linked data from the Crash Outcome Data Evaluation System (CODES) in seven : states was used by the National Highway Traffic Safety Administration as the : basis of a 1996 Report to Congress on the Benefits of Safety Belts and : Motorcycle Helmets (D...

Developments in the safe design of LNG tanks

NASA Astrophysics Data System (ADS)

Fulford, N. J.; Slatter, M. D.

The objective of this paper is to discuss how the gradual development of design concepts for liquefied natural gas (LNG) storage systems has helped to enhance storage safety and economy. The experience in the UK is compared with practice in other countries with similar LNG storage requirements. Emphasis is placed on the excellent record of safety and reliability exhibited by tanks with a primary metal container designed and constructed to approved standards. The work carried out to promote the development of new materials, fire protection, and monitoring systems for use in LNG storage is also summarized, and specific examples described from British Gas experience. Finally, the trends in storage tank design world-wide and options for future design concepts are discussed, bearing in mind planned legislation and design codes governing hazardous installations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kornfeldt, H.; Bjoerk, K.O.; Ekstroem, P.

The protection against dynamic effects in connection with potential pipe breaks has been implemented in different ways in the development of BWR reactor designs. First-generation plant designs reflect code requirements in effect at that time which means that no piping restraint systems were designed and built into those plants. Modern designs have, in contrast, implemented full protection against damage in connection with postulated pipe breaks, as required in current codes and regulations. Moderns standards and current regulatory demands can be met for the older plants by backfitting pipe whip restraint hardware. This could lead to several practical difficulties as thesemore » installations were not anticipated in the original plant design and layout. Meeting the new demands by analysis would in this situation have great advantages. Application of leak-before-break criteria gives an alternative opportunity of meeting modem standards in reactor safety design. Analysis takes into account data specific to BWR primary system operation, actual pipe material properties, piping loads and leak detection capability. Special attention must be given to ensure that the data used reflects actual plant conditions.« less

Standard interface files and procedures for reactor physics codes, version III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carmichael, B.M.

Standards and procedures for promoting the exchange of reactor physics codes are updated to Version-III status. Standards covering program structure, interface files, file handling subroutines, and card input format are included. The implementation status of the standards in codes and the extension of the standards to new code areas are summarized. (15 references) (auth)

Practical guide to bar coding for patient medication safety.

PubMed

Neuenschwander, Mark; Cohen, Michael R; Vaida, Allen J; Patchett, Jeffrey A; Kelly, Jamie; Trohimovich, Barbara

2003-04-15

Bar coding for the medication administration step of the drug-use process is discussed. FDA will propose a rule in 2003 that would require bar-code labels on all human drugs and biologicals. Even with an FDA mandate, manufacturer procrastination and possible shifts in product availability are likely to slow progress. Such delays should not preclude health systems from adopting bar-code-enabled point-of-care (BPOC) systems to achieve gains in patient safety. Bar-code technology is a replacement for traditional keyboard data entry. The elements of bar coding are content, which determines the meaning; data format, which refers to the embedded data and symbology, which describes the "font" in which the machine-readable code is written. For a BPOC system to deliver an acceptable level of patient protection, the hospital must first establish reliable processes for a patient identification band, caregiver badge, and medication bar coding. Medications can have either drug-specific or patient-specific bar codes. Both varieties result in the desired code that supports patient's five rights of drug administration. When medications are not available from the manufacturer in immediate-container bar-coded packaging, other means of applying the bar code must be devised, including the use of repackaging equipment, overwrapping, manual bar coding, and outsourcing. Virtually all medications should be bar coded, the bar code on the label should be easily readable, and appropriate policies, procedures, and checks should be in place. Bar coding has the potential to be not only cost-effective but to produce a return on investment. By bar coding patient identification tags, caregiver badges, and immediate-container medications, health systems can substantially increase patient safety during medication administration.

78 FR 23497 - Propiconazole; Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

...). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS.... Aggregate Risk Assessment and Determination of Safety Section 408(b)(2)(A)(i) of FFDCA allows EPA to... dose at which adverse effects of concern are identified (the LOAEL). Uncertainty/safety factors are...

Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations.

PubMed

Castleman, Barry; Allen, Barbara; Barca, Stefania; Bohme, Susanna Rankin; Henry, Emmanuel; Kaur, Amarjit; Massard-Guilbaud, Genvieve; Melling, Joseph; Menendez-Navarro, Alfredo; Renfrew, Daniel; Santiago, Myrna; Sellers, Christopher; Tweedale, Geoffrey; Zalik, Anna; Zavestoski, Stephen

2008-01-01

At a conference held at Stony Brook University in December 2007, "Dangerous Trade: Histories of Industrial Hazard across a Globalizing World," participants endorsed a Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations. The Code outlines practices that would ensure corporations enact the highest health and environmentally protective measures in all the locations in which they operate. Corporations should observe international guidelines on occupational exposure to air contaminants, plant safety, air and water pollutant releases, hazardous waste disposal practices, remediation of polluted sites, public disclosure of toxic releases, product hazard labeling, sale of products for specific uses, storage and transport of toxic intermediates and products, corporate safety and health auditing, and corporate environmental auditing. Protective measures in all locations should be consonant with the most protective measures applied anywhere in the world, and should apply to the corporations' subsidiaries, contractors, suppliers, distributors, and licensees of technology. Key words: corporations, sustainability, environmental protection, occupational health, code of practice.

Management methodology for pressure equipment

NASA Astrophysics Data System (ADS)

Bletchly, P. J.

Pressure equipment constitutes a significant investment in capital and a major proportion of potential high-risk plant in many operations and this is particularly so in an alumina refinery. In many jurisdictions pressure equipment is also subject to statutory regulation that imposes obligations on Owners of the equipment with respect to workplace safety. Most modern technical standards and industry codes of practice employ a risk-based approach to support better decision making with respect to pressure equipment. For a management system to be effective it must demonstrate that risk is being managed within acceptable limits.

Retrofit Gloveport Cover and Security Device

DOE PAGES

Hinckley, Jon E.

2015-01-01

The world of glovebox work in the areas of science and manufacturing is in a consistent state of flux due to the inherent nature of changing missions. These rapidly changing work environments result in almost continuous regulatory changes within the codes and standards in order to maintain worker and environmental safety. Gloveboxes designed and manufactured prior to these regulations are not easy to update or retrofit to accommodate new requirements. In order to meet the challenge of retrofitting gloveboxes to the meet the requirements, the following solutions have been developed.

Thermal-hydraulic interfacing code modules for CANDU reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, W.S.; Gold, M.; Sills, H.

1997-07-01

The approach for CANDU reactor safety analysis in Ontario Hydro Nuclear (OHN) and Atomic Energy of Canada Limited (AECL) is presented. Reflecting the unique characteristics of CANDU reactors, the procedure of coupling the thermal-hydraulics, reactor physics and fuel channel/element codes in the safety analysis is described. The experience generated in the Canadian nuclear industry may be useful to other types of reactors in the areas of reactor safety analysis.

Real-world aspects of the nuclear criticality safety program at the University of Tennessee-Knoxville

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bentley, C.L.; Dunn, M.E.; Goluoglu, S.

1996-12-31

The nuclear criticality safety (NCS) program at the University of Tennessee-Knoxville (UTK) emphasizes the {open_quotes}real world{close_quotes} in the NCS courses that are offered and also the NCS research that is conducted. Two NCS courses are offered at UTK. The first course is an introduction to the NCS field, which uses the text by Knief and includes an overview of criticality accidents that have actually happened, standards that are currently in use and being developed, and state-of-the-art computer methods and codes. The students learn the same codes, including both theory and application, that are used by most professionals in the NCSmore » field. Thus, if a student accepts a job offer in the NCS area after graduation, he or she is capable of doing productive NCS work the first day on the job. Subcritical limits, hand-calculation methods, current regulations [both U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC)] and current practices are also discussed in the introductory course. The second course emphasizes real world experience and is taught by five instructors with over 100 years of combined experience.« less

The Spanish national health care-associated infection surveillance network (INCLIMECC): data summary January 1997 through December 2006 adapted to the new National Healthcare Safety Network Procedure-associated module codes.

PubMed

Pérez, Cristina Díaz-Agero; Rodela, Ana Robustillo; Monge Jodrá, Vincente

2009-12-01

In 1997, a national standardized surveillance system (designated INCLIMECC [Indicadores Clínicos de Mejora Continua de la Calidad]) was established in Spain for health care-associated infection (HAI) in surgery patients, based on the National Nosocomial Infection Surveillance (NNIS) system. In 2005, in its procedure-associated module, the National Healthcare Safety Network (NHSN) inherited the NNIS program for surveillance of HAI in surgery patients and reorganized all surgical procedures. INCLIMECC actively monitors all patients referred to the surgical ward of each participating hospital. We present a summary of the data collected from January 1997 to December 2006 adapted to the new NHSN procedures. Surgical site infection (SSI) rates are provided by operative procedure and NNIS risk index category. Further quality indicators reported are surgical complications, length of stay, antimicrobial prophylaxis, mortality, readmission because of infection or other complication, and revision surgery. Because the ICD-9-CM surgery procedure code is included in each patient's record, we were able to reorganize our database avoiding the loss of extensive information, as has occurred with other systems.

Neutronic calculation of fast reactors by the EUCLID/V1 integrated code

NASA Astrophysics Data System (ADS)

Koltashev, D. A.; Stakhanova, A. A.

2017-01-01

This article considers neutronic calculation of a fast-neutron lead-cooled reactor BREST-OD-300 by the EUCLID/V1 integrated code. The main goal of development and application of integrated codes is a nuclear power plant safety justification. EUCLID/V1 is integrated code designed for coupled neutronics, thermomechanical and thermohydraulic fast reactor calculations under normal and abnormal operating conditions. EUCLID/V1 code is being developed in the Nuclear Safety Institute of the Russian Academy of Sciences. The integrated code has a modular structure and consists of three main modules: thermohydraulic module HYDRA-IBRAE/LM/V1, thermomechanical module BERKUT and neutronic module DN3D. In addition, the integrated code includes databases with fuel, coolant and structural materials properties. Neutronic module DN3D provides full-scale simulation of neutronic processes in fast reactors. Heat sources distribution, control rods movement, reactivity level changes and other processes can be simulated. Neutron transport equation in multigroup diffusion approximation is solved. This paper contains some calculations implemented as a part of EUCLID/V1 code validation. A fast-neutron lead-cooled reactor BREST-OD-300 transient simulation (fuel assembly floating, decompression of passive feedback system channel) and cross-validation with MCU-FR code results are presented in this paper. The calculations demonstrate EUCLID/V1 code application for BREST-OD-300 simulating and safety justification.

A high-fidelity Monte Carlo evaluation of CANDU-6 safety parameters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Y.; Hartanto, D.

2012-07-01

Important safety parameters such as the fuel temperature coefficient (FTC) and the power coefficient of reactivity (PCR) of the CANDU-6 (CANada Deuterium Uranium) reactor have been evaluated by using a modified MCNPX code. For accurate analysis of the parameters, the DBRC (Doppler Broadening Rejection Correction) scheme was implemented in MCNPX in order to account for the thermal motion of the heavy uranium nucleus in the neutron-U scattering reactions. In this work, a standard fuel lattice has been modeled and the fuel is depleted by using the MCNPX and the FTC value is evaluated for several burnup points including the mid-burnupmore » representing a near-equilibrium core. The Doppler effect has been evaluated by using several cross section libraries such as ENDF/B-VI, ENDF/B-VII, JEFF, JENDLE. The PCR value is also evaluated at mid-burnup conditions to characterize safety features of equilibrium CANDU-6 reactor. To improve the reliability of the Monte Carlo calculations, huge number of neutron histories are considered in this work and the standard deviation of the k-inf values is only 0.5{approx}1 pcm. It has been found that the FTC is significantly enhanced by accounting for the Doppler broadening of scattering resonance and the PCR are clearly improved. (authors)« less

Accuracy of Administrative Codes for Distinguishing Positive Pressure Ventilation from High-Flow Nasal Cannula.

PubMed

Good, Ryan J; Leroue, Matthew K; Czaja, Angela S

2018-06-07

Noninvasive positive pressure ventilation (NIPPV) is increasingly used in critically ill pediatric patients, despite limited data on safety and efficacy. Administrative data may be a good resource for observational studies. Therefore, we sought to assess the performance of the International Classification of Diseases, Ninth Revision procedure code for NIPPV. Patients admitted to the PICU requiring NIPPV or heated high-flow nasal cannula (HHFNC) over the 11-month study period were identified from the Virtual PICU System database. The gold standard was manual review of the electronic health record to verify the use of NIPPV or HHFNC among the cohort. The presence or absence of a NIPPV procedure code was determined by using administrative data. Test characteristics with 95% confidence intervals (CIs) were generated, comparing administrative data with the gold standard. Among the cohort ( n = 562), the majority were younger than 5 years, and the most common primary diagnosis was bronchiolitis. Most (82%) required NIPPV, whereas 18% required only HHFNC. The NIPPV code had a sensitivity of 91.1% (95% CI: 88.2%-93.6%) and a specificity of 57.6% (95% CI: 47.2%-67.5%), with a positive likelihood ratio of 2.15 (95% CI: 1.70-2.71) and negative likelihood ratio of 0.15 (95% CI: 0.11-0.22). Among our critically ill pediatric cohort, NIPPV procedure codes had high sensitivity but only moderate specificity. On the basis of our study results, there is a risk of misclassification, specifically failure to identify children who require NIPPV, when using administrative data to study the use of NIPPV in this population. Copyright © 2018 by the American Academy of Pediatrics.

MODEL 9977 B(M)F-96 SAFETY ANALYSIS REPORT FOR PACKAGING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abramczyk, G; Paul Blanton, P; Kurt Eberl, K

2006-05-18

This Safety Analysis Report for Packaging (SARP) documents the analysis and testing performed on and for the 9977 Shipping Package, referred to as the General Purpose Fissile Package (GPFP). The performance evaluation presented in this SARP documents the compliance of the 9977 package with the regulatory safety requirements for Type B packages. Per 10 CFR 71.59, for the 9977 packages evaluated in this SARP, the value of ''N'' is 50, and the Transport Index based on nuclear criticality control is 1.0. The 9977 package is designed with a high degree of single containment. The 9977 complies with 10 CFR 71more » (2002), Department of Energy (DOE) Order 460.1B, DOE Order 460.2, and 10 CFR 20 (2003) for As Low As Reasonably Achievable (ALARA) principles. The 9977 also satisfies the requirements of the Regulations for the Safe Transport of Radioactive Material--1996 Edition (Revised)--Requirements. IAEA Safety Standards, Safety Series No. TS-R-1 (ST-1, Rev.), International Atomic Energy Agency, Vienna, Austria (2000). The 9977 package is designed, analyzed and fabricated in accordance with Section III of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code, 1992 edition.« less

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

48 CFR 452.219-70 - Size Standard and NAICS Code Information.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Size Standard and NAICS Code Information. 452.219-70 Section 452.219-70 Federal Acquisition Regulations System DEPARTMENT OF... System Code(s) and business size standard(s) describing the products and/or services to be acquired under...

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 57.19093 - Standard signal code.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Standard signal code. 57.19093 Section 57.19093... Signaling § 57.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

30 CFR 56.19093 - Standard signal code.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Standard signal code. 56.19093 Section 56.19093... Signaling § 56.19093 Standard signal code. A standard code of hoisting signals shall be adopted and used at each mine. The movement of a shaft conveyance on a “one bell” signal is prohibited. ...

[Expert investigation on food safety standard system framework construction in China].

PubMed

He, Xiang; Yan, Weixing; Fan, Yongxiang; Zeng, Biao; Peng, Zhen; Sun, Zhenqiu

2013-09-01

Through investigating food safety standard framework among food safety experts, to summarize the basic elements and principles of food safety standard system, and provide policy advices for food safety standards framework. A survey was carried out among 415 experts from government, professional institutions and the food industry/enterprises using the National Food Safety Standard System Construction Consultation Questionnaire designed in the name of the Secretariat of National Food Safety Standard Committee. Experts have different advices in each group about the principles of food product standards, food additive product standards, food related product standards, hygienic practice, test methods. According to the results, the best solution not only may reflect experts awareness of the work of food safety standards situation, but also provide advices for setting and revision of food safety standards for the next. Through experts investigation, the framework and guiding principles of food safety standard had been built.

Theory of protective empowering for balancing patient safety and choices.

PubMed

Chiovitti, Rosalina F

2011-01-01

Registered nurses in psychiatric-mental health nursing continuously balance the ethical principles of duty to do good (beneficence) and no harm (non-maleficence) with the duty to respect patient choices (autonomy). However, the problem of nurses' level of control versus patients' choices remains a challenge. The aim of this article is to discuss how nurses accomplish their simultaneous responsibility for balancing patient safety (beneficence and non-maleficence) with patient choices (autonomy) through the theory of protective empowering. This is done by reflecting on interview excerpts about caring from 17 registered nurses taking part in a grounded theory study conducted in three acute urban psychiatric hospital settings in Canada. The interplay between the protective and empowering dimensions of the theory of protective empowering was found to correspond with international, national, and local nursing codes of ethics and standards. The overall core process of protective empowering, and its associated reflective questions, is offered as a new lens for balancing patient safety with choices.

Current and anticipated uses of thermalhydraulic and neutronic codes at PSI

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aksan, S.N.; Zimmermann, M.A.; Yadigaroglu, G.

1997-07-01

The thermalhydraulic and/or neutronic codes in use at PSI mainly provide the capability to perform deterministic safety analysis for Swiss NPPs and also serve as analysis tools for experimental facilities for LWR and ALWR simulations. In relation to these applications, physical model development and improvements, and assessment of the codes are also essential components of the activities. In this paper, a brief overview is provided on the thermalhydraulic and/or neutronic codes used for safety analysis of LWRs, at PSI, and also of some experiences and applications with these codes. Based on these experiences, additional assessment needs are indicated, together withmore » some model improvement needs. The future needs that could be used to specify both the development of a new code and also improvement of available codes are summarized.« less

Road safety practices among commercial motorcyclists in a rural town in Nigeria: implications for health education.

PubMed

Amoran, O E; Eme, Owoaje; Giwa, O A; Gbolahan, O B

This cross-sectional, community-based study was carried out among commercial motorcyclists in Igboora. All the commercial motor parks in Igboora were visited and all the commercial motorcyclists who consented to participate in the study were interviewed. Information on the respondents' socio-demographic characteristics, and the practice of road safety measures was collected using an interviewer administered questionnaire. A total of 299 motorcyclists were interviewed. All (100%) of them were males. The mean age of the respondents was 27.4 +/- 7.4 years. One hundred eighty-two (60.7%) of the motorcyclists had the correct knowledge of the purpose of Highway Code. Only 70 (23.3%) could recognize more than half of the currently used road safety codes and 47 (15.7%) obey these road safety codes more than half of the time they see it. Only 183 (61.2%) of them had a driving license and 72 (24.1%) were able to produce these licenses on demand. All (100%) of the respondents did not use any protective helmet. Those who have longer years of working experience, higher level of education and higher knowledge of the safety codes practice it more regularly (r = 0.198, p = 0.001, chi2= 9.31, p = 0.025, and r = 0.28, p = 0.001 respectively). One hundred thirty-six (45.5%) have been involved in at least one accident in the preceding year. The overall incidence of road traffic accident was 2.16 per 1,000. There was however on statistically significant association between the practice of road safety codes and the occurrence of road traffic accidents (chi2= 0.176, p = 0.916). The study shows that the practice of road safety measures was low in this rural Nigerian community and was not associated with the incidence of road traffic accidents. Introducing road safety education particularly targeted at educating the motorcyclists on the importance and practice of road safety measures would lead to an increase in the practice of the safety measures and hopefully a reduction in the incidence of road traffic accidents.

Measuring patient safety culture in maternal and child health institutions in China: a qualitative study.

PubMed

Wang, Yuanyuan; Liu, Weiwei; Shi, Huifeng; Liu, Chaojie; Wang, Yan

2017-07-12

Patient safety culture (PSC) plays a critical role in ensuring safe and quality care. Extensive PSC studies have been undertaken in hospitals. However, little is known about PSC in maternal and child health (MCH) institutions in China, which provide both population-based preventive services as well as individual care for patients. This study aimed to develop a theoretical framework for conceptualising PSC in MCH institutions in China. The study was undertaken in six MCH institutions (three in Hebei and three in Beijing). Participants (n=118) were recruited through stratified purposive sampling: 20 managers/administrators, 59 care providers and 39 patients. In-depth interviews were conducted with the participants. The interview data were coded using both inductive (based on the existing PSC theory developed by the Agency for Healthcare Research and Quality) and deductive (open coding arising from data) approaches. A PSC framework was formulated through axial coding that connected initial codes and selective coding that extracted a small number of themes. The interviewees considered patient safety in relation to six aspects: safety and security in public spaces, safety of medical services, privacy and information security, financial security, psychological safety and gap in services. A 12-dimensional PSC framework was developed, containing 69 items. While the existing PSC theory was confirmed by this study, some new themes emerged from the data. Patients expressed particular concerns about psychological safety and financial security. Defensive medical practices emerged as a PSC dimension that is associated with not only medical safety but also financial security and psychological safety. Patient engagement was also valued by the interviewees, especially the patients, as part of PSC. Although there are some common features in PSC across different healthcare delivery systems, PSC can also be context specific. In MCH settings in China, the meaning of 'patient safety' goes beyond the traditional definition of patients. General well-being, health and disease prevention are important anchor points for defining PSC in such settings. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Validation of a common data model for active safety surveillance research

PubMed Central

Ryan, Patrick B; Reich, Christian G; Hartzema, Abraham G; Stang, Paul E

2011-01-01

Objective Systematic analysis of observational medical databases for active safety surveillance is hindered by the variation in data models and coding systems. Data analysts often find robust clinical data models difficult to understand and ill suited to support their analytic approaches. Further, some models do not facilitate the computations required for systematic analysis across many interventions and outcomes for large datasets. Translating the data from these idiosyncratic data models to a common data model (CDM) could facilitate both the analysts' understanding and the suitability for large-scale systematic analysis. In addition to facilitating analysis, a suitable CDM has to faithfully represent the source observational database. Before beginning to use the Observational Medical Outcomes Partnership (OMOP) CDM and a related dictionary of standardized terminologies for a study of large-scale systematic active safety surveillance, the authors validated the model's suitability for this use by example. Validation by example To validate the OMOP CDM, the model was instantiated into a relational database, data from 10 different observational healthcare databases were loaded into separate instances, a comprehensive array of analytic methods that operate on the data model was created, and these methods were executed against the databases to measure performance. Conclusion There was acceptable representation of the data from 10 observational databases in the OMOP CDM using the standardized terminologies selected, and a range of analytic methods was developed and executed with sufficient performance to be useful for active safety surveillance. PMID:22037893

Use the Bar Code System to Improve Accuracy of the Patient and Sample Identification.

PubMed

Chuang, Shu-Hsia; Yeh, Huy-Pzu; Chi, Kun-Hung; Ku, Hsueh-Chen

2018-01-01

In time and correct sample collection were highly related to patient's safety. The sample error rate was 11.1%, because misbranded patient information and wrong sample containers during January to April, 2016. We developed a barcode system of "Specimens Identify System" through process of reengineering of TRM, used bar code scanners, add sample container instructions, and mobile APP. Conclusion, the bar code systems improved the patient safety and created green environment.

National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornton, Brian; Halverson, Mark A.; Myer, Michael

Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energy’s (DOE’s) Building Energy Codes Program (BECP). DOE’s BECP supports upgrading building energy codes and standards, and the states’ adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components,more » initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.« less

Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornton, Brian A.; Halverson, Mark A.; Myer, Michael

Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energy’s (DOE’s) Building Energy Codes Program (BECP). DOE’s BECP supports upgrading building energy codes and standards, and the states’ adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components,more » initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.« less

Health and Safety Adoption from Use of a Risk Assessment Document on Irish Farms.

PubMed

McNamara, John; Griffin, Patrick; Kinsella, James; Phelan, James

2017-01-01

This article describes levels of implementation of occupational health and safety (OHS) controls on a sample of Irish farms following completion of a risk assessment document (RAD) made available as part of a statutory code of practice (COP) for the agriculture sector. The article describes the legislation mandating the COP and the operation of a prevention initiative (PI) among key stakeholders to develop and promote farmer use of the COP and RAD. RADs were collected for farmers (N = 475) and the number and type of OHS controls listed for action were tabulated. A farm audit of OHS standards and of implementation of controls listed for action in the RAD was undertaken among a randomly selected sample of farms (N = 94) where the RAD was completed. The study data indicates that farmers used the RAD to a limited extent, and that their focus in its use was on identifying physical rather than organizational controls. An association was found between farmers who actively implemented controls and positive OHS standards. Farm OHS standards were also associated with farmer attitude to OHS, farm enterprise, farmer age category, and work time needed to operate the farm. Overall, the study data suggests that standards of farm management are a crucial determinant of OHS standards. The study data also indicates that having knowledge of required OHS controls does not ensure implementation. Development of social learning in groups is considered as a significant means of increasing OHS farm adoption.

A proposal for seismic evaluation index of mid-rise existing RC buildings in Afghanistan

NASA Astrophysics Data System (ADS)

Naqi, Ahmad; Saito, Taiki

2017-10-01

Mid-rise RC buildings gradually rise in Kabul and entire Afghanistan since 2001 due to rapid increase of population. To protect the safety of resident, Afghan Structure Code was issued in 2012. But the building constructed before 2012 failed to conform the code requirements. In Japan, new sets of rules and law for seismic design of buildings had been issued in 1981 and severe earthquake damage was disclosed for the buildings designed before 1981. Hence, the Standard for Seismic Evaluation of RC Building published in 1977 has been widely used in Japan to evaluate the seismic capacity of existing buildings designed before 1981. Currently similar problem existed in Afghanistan, therefore, this research examined the seismic capacity of six RC buildings which were built before 2012 in Kabul by applying the seismic screening procedure presented by Japanese standard. Among three screening procedures with different capability, the less detailed screening procedure, the first level of screening, is applied. The study founds an average seismic index (IS-average=0.21) of target buildings. Then, the results were compared with those of more accurate seismic evaluation procedures of Capacity Spectrum Method (CSM) and Time History Analysis (THA). The results for CSM and THA show poor seismic performance of target buildings not able to satisfy the safety design limit (1/100) of the maximum story drift. The target buildings are then improved by installing RC shear walls. The seismic indices of these retrofitted buildings were recalculated and the maximum story drifts were analyzed by CSM and THA. The seismic indices and CSM and THA results are compared and found that building with seismic index larger than (IS-average =0.4) are able to satisfy the safety design limit. Finally, to screen and minimize the earthquake damage over the existing buildings, the judgement seismic index (IS-Judgment=0.5) for the first level of screening is proposed.

Final Report. An Integrated Partnership to Create and Lead the Solar Codes and Standards Working Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenthal, Andrew

The DOE grant, “An Integrated Partnership to Create and Lead the Solar Codes and Standards Working Group,” to New Mexico State University created the Solar America Board for Codes and Standards (Solar ABCs). From 2007 – 2013 with funding from this grant, Solar ABCs identified current issues, established a dialogue among key stakeholders, and catalyzed appropriate activities to support the development of codes and standards that facilitated the installation of high quality, safe photovoltaic systems. Solar ABCs brought the following resources to the PV stakeholder community; Formal coordination in the planning or revision of interrelated codes and standards removing “stovemore » pipes” that have only roofing experts working on roofing codes, PV experts on PV codes, fire enforcement experts working on fire codes, etc.; A conduit through which all interested stakeholders were able to see the steps being taken in the development or modification of codes and standards and participate directly in the processes; A central clearing house for new documents, standards, proposed standards, analytical studies, and recommendations of best practices available to the PV community; A forum of experts that invites and welcomes all interested parties into the process of performing studies, evaluating results, and building consensus on standards and code-related topics that affect all aspects of the market; and A biennial gap analysis to formally survey the PV community to identify needs that are unmet and inhibiting the market and necessary technical developments.« less

Post-test analysis of dryout test 7B' of the W-1 Sodium Loop Safety Facility Experiment with the SABRE-2P code. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rose, S.D.; Dearing, J.F.

An understanding of conditions that may cause sodium boiling and boiling propagation that may lead to dryout and fuel failure is crucial in liquid-metal fast-breeder reactor safety. In this study, the SABRE-2P subchannel analysis code has been used to analyze the ultimate transient of the in-core W-1 Sodium Loop Safety Facility experiment. This code has a 3-D simple nondynamic boiling model which is able to predict the flow instability which caused dryout. In other analyses dryout has been predicted for out-of-core test bundles and so this study provides additional confirmation of the model.

Two Perspectives on the Origin of the Standard Genetic Code

NASA Astrophysics Data System (ADS)

Sengupta, Supratim; Aggarwal, Neha; Bandhu, Ashutosh Vishwa

2014-12-01

The origin of a genetic code made it possible to create ordered sequences of amino acids. In this article we provide two perspectives on code origin by carrying out simulations of code-sequence coevolution in finite populations with the aim of examining how the standard genetic code may have evolved from more primitive code(s) encoding a small number of amino acids. We determine the efficacy of the physico-chemical hypothesis of code origin in the absence and presence of horizontal gene transfer (HGT) by allowing a diverse collection of code-sequence sets to compete with each other. We find that in the absence of horizontal gene transfer, natural selection between competing codes distinguished by differences in the degree of physico-chemical optimization is unable to explain the structure of the standard genetic code. However, for certain probabilities of the horizontal transfer events, a universal code emerges having a structure that is consistent with the standard genetic code.

About the necessity to manage events coded with MedDRA prior to statistical analysis: proposal of a strategy with application to a randomized clinical trial, ANRS 099 ALIZE.

PubMed

Journot, Valérie; Tabuteau, Sophie; Collin, Fidéline; Molina, Jean-Michel; Chene, Geneviève; Rancinan, Corinne

2008-03-01

Since 2003, the Medical Dictionary for Regulatory Activities (MedDRA) is the regulatory standard for safety report in clinical trials in the European Community. Yet, we found no published example of a practical experience for a scientifically oriented statistical analysis of events coded with MedDRA. We took advantage of a randomized trial in HIV-infected patients with MedDRA-coded events to explain the difficulties encountered during the events analysis and the strategy developed to report events consistently with trial-specific objectives. MedDRA has a rich hierarchical structure, which allows the grouping of coded terms into 5 levels, the highest being "System Organ Class" (SOC). Each coded term may be related to several SOCs, among which one primary SOC is defined. We developed a new general 5-step strategy to select a SOC as trial primary SOC, consistently with trial-specific objectives for this analysis. We applied it to the ANRS 099 ALIZE trial, where all events were coded with MedDRA version 3.0. We compared the MedDRA and the ALIZE primary SOCs. In the ANRS 099 ALIZE trial, 355 patients were recruited, and 3,722 events were reported and documented, among which 35% had multiple SOCs (2 to 4). We applied the proposed 5-step strategy. Altogether, 23% of MedDRA primary SOCs were modified, mainly from MedDRA primary SOCs "Investigations" (69%) and "Ear and labyrinth disorders" (6%), for the ALIZE primary SOCs "Hepatobiliary disorders" (35%), "Musculoskeletal and connective tissue disorders" (21%), and "Gastrointestinal disorders" (15%). MedDRA largely enhanced in size and complexity with versioning and the development of Standardized MedDRA Queries. Yet, statisticians should not systematically rely on primary SOCs proposed by MedDRA to report events. A simple general 5-step strategy to re-classify events consistently with the trial-specific objectives might be useful in HIV trials as well as in other fields.

Building Standards and Codes for Energy Conservation

ERIC Educational Resources Information Center

Gross, James G.; Pierlert, James H.

1977-01-01

Current activity intended to lead to energy conservation measures in building codes and standards is reviewed by members of the Office of Building Standards and Codes Services of the National Bureau of Standards. For journal availability see HE 508 931. (LBH)

42 CFR 137.368 - Is the Secretary responsible for oversight and compliance of health and safety codes during...

Code of Federal Regulations, 2010 CFR

2010-10-01

... compliance of health and safety codes during construction projects being performed by a Self-Governance Tribe... SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the Secretary in Establishing and Implementing Construction Project Agreements § 137.368 Is the Secretary responsible for oversight and compliance of health...

Safety self-efficacy and safety performance: potential antecedents and the moderation effect of standardization.

PubMed

Katz-Navon, Tal; Naveh, Eitan; Stern, Zvi

2007-01-01

The purpose of this paper is to suggest a new safety self-efficacy construct and to explore its antecedents and interaction with standardization to influence in-patient safety. The paper used a survey of 161 nurses using a self-administered questionnaire over a 14-day period in two large Israeli general hospitals. Nurses answered questions relating to four safety self-efficacy antecedents: enactive mastery experiences; managers as safety role models; verbal persuasion; and safety priority, that relate to the perceived level of standardization and safety self-efficacy. Confirmatory factor analysis was used to assess the scale's construct validity. Regression models were used to test hypotheses regarding the antecedents and influence of safety self-efficacy. Results indicate that: managers as safety role models; distributing safety information; and priority given to safety, contributed to safety self-efficacy. Additionally, standardization moderated the effects of safety self-efficacy and patient safety such that safety self-efficacy was positively associated with patient safety when standardization was low rather than high. Hospital managers should be aware of individual motivations as safety self-efficacy when evaluating the potential influence of standardization on patient safety. Theoretically, the study introduces a new safety self-efficacy concept, and captures its antecedents and influence on safety performance. Also, the study suggests safety self-efficacy as a boundary condition for the influence of standardization on safety performance. Implementing standardization in healthcare is problematic because not all processes can be standardized. In this case, self-efficacy plays an important role in securing patient safety. Hence, safety self-efficacy may serve as a "substitute-for-standardization," by promoting staff behaviors that affect patient safety.

Technical Support Document for Version 3.6.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

Generating Customized Verifiers for Automatically Generated Code

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd

2008-01-01

Program verification using Hoare-style techniques requires many logical annotations. We have previously developed a generic annotation inference algorithm that weaves in all annotations required to certify safety properties for automatically generated code. It uses patterns to capture generator- and property-specific code idioms and property-specific meta-program fragments to construct the annotations. The algorithm is customized by specifying the code patterns and integrating them with the meta-program fragments for annotation construction. However, this is difficult since it involves tedious and error-prone low-level term manipulations. Here, we describe an annotation schema compiler that largely automates this customization task using generative techniques. It takes a collection of high-level declarative annotation schemas tailored towards a specific code generator and safety property, and generates all customized analysis functions and glue code required for interfacing with the generic algorithm core, thus effectively creating a customized annotation inference algorithm. The compiler raises the level of abstraction and simplifies schema development and maintenance. It also takes care of some more routine aspects of formulating patterns and schemas, in particular handling of irrelevant program fragments and irrelevant variance in the program structure, which reduces the size, complexity, and number of different patterns and annotation schemas that are required. The improvements described here make it easier and faster to customize the system to a new safety property or a new generator, and we demonstrate this by customizing it to certify frame safety of space flight navigation code that was automatically generated from Simulink models by MathWorks' Real-Time Workshop.

Safety Education and Science.

ERIC Educational Resources Information Center

Ralph, Richard

1980-01-01

Safety education in the science classroom is discussed, including the beginning of safe management, attitudes toward safety education, laboratory assistants, chemical and health regulation, safety aids, and a case study of a high school science laboratory. Suggestions for safety codes for science teachers, student behavior, and laboratory…

Current and anticipated uses of thermal hydraulic codes at the Japan Atomic Energy Research Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akimoto, Hajime; Kukita; Ohnuki, Akira

1997-07-01

The Japan Atomic Energy Research Institute (JAERI) is conducting several research programs related to thermal-hydraulic and neutronic behavior of light water reactors (LWRs). These include LWR safety research projects, which are conducted in accordance with the Nuclear Safety Commission`s research plan, and reactor engineering projects for the development of innovative reactor designs or core/fuel designs. Thermal-hydraulic and neutronic codes are used for various purposes including experimental analysis, nuclear power plant (NPP) safety analysis, and design assessment.

The proposed coding standard at GSFC

NASA Technical Reports Server (NTRS)

Morakis, J. C.; Helgert, H. J.

1977-01-01

As part of the continuing effort to introduce standardization of spacecraft and ground equipment in satellite systems, NASA's Goddard Space Flight Center and other NASA facilities have supported the development of a set of standards for the use of error control coding in telemetry subsystems. These standards are intended to ensure compatibility between spacecraft and ground encoding equipment, while allowing sufficient flexibility to meet all anticipated mission requirements. The standards which have been developed to date cover the application of block codes in error detection and error correction modes, as well as short and long constraint length convolutional codes decoded via the Viterbi and sequential decoding algorithms, respectively. Included are detailed specifications of the codes, and their implementation. Current effort is directed toward the development of standards covering channels with burst noise characteristics, channels with feedback, and code concatenation.

Assessment of tissue allograft safety monitoring with administrative healthcare databases: a pilot project using Medicare data.

PubMed

Dhakal, Sanjaya; Burwen, Dale R; Polakowski, Laura L; Zinderman, Craig E; Wise, Robert P

2014-03-01

Assess whether Medicare data are useful for monitoring tissue allograft safety and utilization. We used health care claims (billing) data from 2007 for 35 million fee-for-service Medicare beneficiaries, a predominantly elderly population. Using search terms for transplant-related procedures, we generated lists of ICD-9-CM and CPT(®) codes and assessed the frequency of selected allograft procedures. Step 1 used inpatient data and ICD-9-CM procedure codes. Step 2 added non-institutional provider (e.g., physician) claims, outpatient institutional claims, and CPT codes. We assembled preliminary lists of diagnosis codes for infections after selected allograft procedures. Many ICD-9-CM codes were ambiguous as to whether the procedure involved an allograft. Among 1.3 million persons with a procedure ascertained using the list of ICD-9-CM codes, only 1,886 claims clearly involved an allograft. CPT codes enabled better ascertainment of some allograft procedures (over 17,000 persons had corneal transplants and over 2,700 had allograft skin transplants). For spinal fusion procedures, CPT codes improved specificity for allografts; of nearly 100,000 patients with ICD-9-CM codes for spinal fusions, more than 34,000 had CPT codes indicating allograft use. Monitoring infrequent events (infections) after infrequent exposures (tissue allografts) requires large study populations. A strength of the large Medicare databases is the substantial number of certain allograft procedures. Limitations include lack of clinical detail and donor information. Medicare data can potentially augment passive reporting systems and may be useful for monitoring tissue allograft safety and utilization where codes clearly identify allograft use and coding algorithms can effectively screen for infections.

The Italian experience on T/H best estimate codes: Achievements and perspectives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alemberti, A.; D`Auria, F.; Fiorino, E.

1997-07-01

Themalhydraulic system codes are complex tools developed to simulate the power plants behavior during off-normal conditions. Among the objectives of the code calculations the evaluation of safety margins, the operator training, the optimization of the plant design and of the emergency operating procedures, are mostly considered in the field of the nuclear safety. The first generation of codes was developed in the United States at the end of `60s. Since that time, different research groups all over the world started the development of their own codes. At the beginning of the `80s, the second generation codes were proposed; these differmore » from the first generation codes owing to the number of balance equations solved (six instead of three), the sophistication of the constitutive models and of the adopted numerics. The capabilities of available computers have been fully exploited during the years. The authors then summarize some of the major steps in the process of developing, modifying, and advancing the capabilities of the codes. They touch on the fact that Italian, and for that matter non-American, researchers have not been intimately involved in much of this work. They then describe the application of these codes in Italy, even though there are no operating or under construction nuclear power plants at this time. Much of this effort is directed at the general question of plant safety in the face of transient type events.« less

Understanding Engineers' Responsibilities: A Prerequisite to Designing Engineering Education : Commentary on "Educating Engineers for the Public Good Through International Internships: Evidence from a Case Study at Universitat Politècnica de València".

PubMed

Murphy, Colleen; Gardoni, Paolo

2017-07-18

The development of the curriculum for engineering education (course requirements as well as extra-curricular activities like study abroad and internships) should be based on a comprehensive understanding of engineers' responsibilities. The responsibilities that are constitutive of being an engineer include striving to fulfill the standards of excellence set by technical codes; to improve the idealized models that engineers use to predict, for example, the behavior of alternative designs; and to achieve the internal goods such as safety and sustainability as they are reflected in the design codes. Globalization has implications for these responsibilities and, in turn, for engineering education, by, for example, modifying the collection of possible solutions recognized for existing problems. In addition, international internships can play an important role in fostering the requisite moral imagination of engineering students.

Gas pipeline relief valves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bright, G.F.

1974-01-01

A discussion of the increasing activity of natural gas pipeline companies in the analysis of the overpressure protection methods for complying with the provisions of Part 192, Title 49, Code of Federal Regulations ''Transportation of Natural and Other Gas by Pipelines; Minimum Federal Safety Standards'' and with the USAS B31.8 Code covers the basic requirements for protection against accidental overpressure as being essentially the same in both documents, i.e., at the maximum allowable operating overpressure in a gas system can be exceeded either at a compressor station or downstream of a pressure control valve; mandatory use of overpressure protection devicesmore » in these situations, except for those cases which exempt some service regulators because the distribution system pressure is less than 60 psig and six other requirements of design, performance, and size are met; and basic design requirements of a pressure relief or limiting station and the components used.« less

A multicenter collaborative approach to reducing pediatric codes outside the ICU.

PubMed

Hayes, Leslie W; Dobyns, Emily L; DiGiovine, Bruno; Brown, Ann-Marie; Jacobson, Sharon; Randall, Kelly H; Wathen, Beth; Richard, Heather; Schwab, Carolyn; Duncan, Kathy D; Thrasher, Jodi; Logsdon, Tina R; Hall, Matthew; Markovitz, Barry

2012-03-01

The Child Health Corporation of America formed a multicenter collaborative to decrease the rate of pediatric codes outside the ICU by 50%, double the days between these events, and improve the patient safety culture scores by 5 percentage points. A multidisciplinary pediatric advisory panel developed a comprehensive change package of process improvement strategies and measures for tracking progress. Learning sessions, conference calls, and data submission facilitated collaborative group learning and implementation. Twenty Child Health Corporation of America hospitals participated in this 12-month improvement project. Each hospital identified at least 1 noncritical care target unit in which to implement selected elements of the change package. Strategies to improve prevention, detection, and correction of the deteriorating patient ranged from relatively simple, foundational changes to more complex, advanced changes. Each hospital selected a broad range of change package elements for implementation using rapid-cycle methodologies. The primary outcome measure was reduction in codes per 1000 patient days. Secondary outcomes were days between codes and change in patient safety culture scores. Code rate for the collaborative did not decrease significantly (3% decrease). Twelve hospitals reported additional data after the collaborative and saw significant improvement in code rates (24% decrease). Patient safety culture scores improved by 4.5% to 8.5%. A complex process, such as patient deterioration, requires sufficient time and effort to achieve improved outcomes and create a deeply embedded culture of patient safety. The collaborative model can accelerate improvements achieved by individual institutions.

78 FR 28949 - Fund Availability Under VA's Homeless Providers Grant and Per Diem Program (Rehabilitation)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-16

... Per Diem Program as a part of the effort to increase the useful life of the facilities of grantees... grantees are required to ensure that facilities rehabilitated under this NOFA meet the Life Safety Code of the National Fire and Protection Association. Please note, typically the Life Safety Code is more...

Quantitative and Qualitative Analysis of Nutrition and Food Safety Information in School Science Textbooks of India

ERIC Educational Resources Information Center

Subba Rao, G. M.; Vijayapushapm, T.; Venkaiah, K.; Pavarala, V.

2012-01-01

Objective: To assess quantity and quality of nutrition and food safety information in science textbooks prescribed by the Central Board of Secondary Education (CBSE), India for grades I through X. Design: Content analysis. Methods: A coding scheme was developed for quantitative and qualitative analyses. Two investigators independently coded the…

Review of the probabilistic failure analysis methodology and other probabilistic approaches for application in aerospace structural design

NASA Technical Reports Server (NTRS)

Townsend, J.; Meyers, C.; Ortega, R.; Peck, J.; Rheinfurth, M.; Weinstock, B.

1993-01-01

Probabilistic structural analyses and design methods are steadily gaining acceptance within the aerospace industry. The safety factor approach to design has long been the industry standard, and it is believed by many to be overly conservative and thus, costly. A probabilistic approach to design may offer substantial cost savings. This report summarizes several probabilistic approaches: the probabilistic failure analysis (PFA) methodology developed by Jet Propulsion Laboratory, fast probability integration (FPI) methods, the NESSUS finite element code, and response surface methods. Example problems are provided to help identify the advantages and disadvantages of each method.

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

UID...Leaving Its Mark on the Universe

NASA Technical Reports Server (NTRS)

Schramm, Harry F., Jr.

2008-01-01

Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21 st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture, recently trademarked as Nanocodes, that can be converted to Data Matrix information through software. The accompanying intellectual property is protected by ten patents, several of which are licensed. Direct marking Data Matrix on NASA parts dramatically decreases data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection.

UID...Now That's Gonna Leave A Mark

NASA Technical Reports Server (NTRS)

Schramm, Harry F., Jr.

2007-01-01

Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture, recently trademarked as Nanocodes, that can be converted to Data Matrix information through software. The accompanying intellectual property is protected by ten patents, several of which are licensed. Direct marking Data Matrix on NASA parts dramatically decreases data entry errors and the number ofparts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection.

UID...Now That's Gonna Leave a Mark

NASA Technical Reports Server (NTRS)

Schramm, Harry F.

2008-01-01

Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture, recently trademarked as Nanocodes, that can be converted to Data Matrix information through software. The accompanying intellectual property is protected by ten patents, several of which are licensed. Direct marking Data Matrix on NASA parts dramatically decreases data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection.

UID....Now That's Gonna Leave A Mark

NASA Technical Reports Server (NTRS)

Schramm, Harry F., Jr.

2008-01-01

Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21 st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture, recently trademarked as Nanocodes, that can be converted to Data Matrix information through software. The accompanying intellectual property is protected by ten patents, several of which are licensed. Direct marking Data Matrix on NASA parts dramatically decreases data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection.

UID.. .Now That's Gonna Leave A Mark

NASA Technical Reports Server (NTRS)

Schramm, Fred

2006-01-01

Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture, recently trademarked as Nanocodes, that can be converted to Data Matrix information through software. The accompanying intellectual property is protected by ten patents, several of which are licensed. Direct marking Data Matrix on NASA parts dramatically decreases data entry errors and the number of parts that go through their life cycle marked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection.

NASA Technologies for Product Identification

NASA Technical Reports Server (NTRS)

Schramm, Fred, Jr.

2006-01-01

Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture called NanocodesTM that can be converted to a Data Matrix. The accompanying intellectual property is protected by 10 patents, several of which are licensed. Direct marking Data Matrix on NASA parts virtually eliminates data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection. This presentation highlights the accomplishments of NASA in its efforts to develop technologies for automatic identification, its efforts to implement them and its vision on their role in space.

Review of codes, standards, and regulations for natural gas locomotives.

DOT National Transportation Integrated Search

2014-06-01

This report identified, collected, and summarized relevant international codes, standards, and regulations with potential : applicability to the use of natural gas as a locomotive fuel. Few international or country-specific codes, standards, and regu...

Report on SARS backfit evaluation, Exxon Donor Solvent Plant, Baytown, Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, A.F. Jr.

1980-07-02

This report provides information on observations, findings, and conclusions arising from a site visit to the Exxon Donor Solvent Plant, Baytown, Texas. That visit was to provide technical assistance and professional services to the DOE/ASFE/OPTA Project Officer regarding verification of his initial determination that this pilot plant is exempt from the SARS backfit requirement (DOE Order 5481.1). A secondary purpose was to obtain further information regarding the occupational safety and health plans and procedures at this new pilot plant facility. It is concluded that a well planned and implemented occupational safety and health program exists at the Exxon Donor Solventmore » Plant. Excellent manuals regarding general safety requirements and protection against carcinogens have been prepared and distributed. A Safe Operations Committee is in effect as is a Risk Management Committee. Adequate safety and industrial hygiene staff has been assigned and an excellent medical surveillance program has been established. Adequate compliance with environmental codes, standards, and regulations is being achieved. Although this plant is not subject to SARS because of the nature of the contract, adequate documentation exists in any case to exempt it from the SARS backfit requirement.« less

78 FR 67048 - Prothioconazole; Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). B. How can I get electronic access to other related information? You may... Assessment and Determination of Safety Section 408(b)(2)(A)(i) of FFDCA allows EPA to establish a tolerance...

Standard Operating Procedures, ethical and legal regulations in BTB (Brain/Tissue/Bio) banking: what is still missing?

PubMed

Ravid, Rivka

2008-09-01

The use of human biological specimens in scientific research is the focus of current international public and professional concern and a major issue in bioethics in general. Brain/Tissue/Bio banks (BTB-banks) are a rapid developing sector; each of these banks acts locally as a steering unit for the establishment of the local Standard Operating Procedures (SOPs) and the legal regulations and ethical guidelines to be followed in the procurement and dissemination of research specimens. An appropriat Code of Conduct is crucial to a successful operation of the banks and the research application they handle. What are we still missing ? (1) Adequate funding for research BTB-banks. (2) Standard evaluation protocls for audit of BTB-bank performance. (3) Internationally accepted SOP's which will facilitate exchange and sharing of specimens and data with the scientific community. (4) Internationally accepted Code of Conduct. In the present paper we review the most pressing organizational, methodological, medico-legal and ethical issues involved in BTB-banking; funding, auditing, procurement, management/handling, dissemination and sharing of specimens, confidentiality and data protection, genetic testing, "financial gain" and safety measures. Taking into consideration the huge variety of the specimens stored in different repositories and the enormous differences in medico-legal systems and ethics regulations in different countries it is strongly recommend that the health-care systems and institutions who host BTB-Banks will put more efforts in getting adequate funding for the infrastructure and daily activities. The BTB-banks should define evaluation protocols, SOPs and their Code of Conduct. This in turn will enable the banks to share the collected specimens and data with the largest possible number of researchers and aim at a maximal scientific spin-off and advance in public health research.

Assessment of the safety of aquatic animal commodities for international trade: the OIE Aquatic Animal Health code.

PubMed

Oidtmann, B; Johnston, C; Klotins, K; Mylrea, G; Van, P T; Cabot, S; Martin, P Rosado; Ababouch, L; Berthe, F

2013-02-01

Trading of aquatic animals and aquatic animal products has become increasingly globalized during the last couple of decades. This commodity trade has increased the risk for the spread of aquatic animal pathogens. The World Organisation for Animal Health (OIE) is recognized as the international standard-setting organization for measures relating to international trade in animals and animal products. In this role, OIE has developed the Aquatic Animal Health Code, which provides health measures to be used by competent authorities of importing and exporting countries to avoid the transfer of agents pathogenic for animals or humans, whilst avoiding unjustified sanitary barriers. An OIE ad hoc group developed criteria for assessing the safety of aquatic animals or aquatic animal products for any purpose from a country, zone or compartment not declared free from a given disease 'X'. The criteria were based on the absence of the pathogenic agent in the traded commodity or inactivation of the pathogenic agent by the commercial processing used to produce the commodity. The group also developed criteria to assess the safety of aquatic animals or aquatic animal products for retail trade for human consumption from potentially infected areas. Such commodities were assessed considering the form and presentation of the product, the expected volume of waste tissues generated by the consumer and the likely presence of viable pathogenic agent in the waste. The ad hoc group applied the criteria to commodities listed in the individual disease chapters of the Aquatic Animal Health Code (2008 edition). Revised lists of commodities for which no additional measures should be required by the importing countries regardless of the status for disease X of the exporting country were developed and adopted by the OIE World Assembly of Delegates in May 2011. The rationale of the criteria and their application will be explained and demonstrated using examples. © 2012 Crown Copyright. Reproduced with the permission of the Controller of Her Majesty’s Stationery Office and Cefas, Aquatic Animal Disease Group.

Improvements and applications of COBRA-TF for stand-alone and coupled LWR safety analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avramova, M.; Cuervo, D.; Ivanov, K.

2006-07-01

The advanced thermal-hydraulic subchannel code COBRA-TF has been recently improved and applied for stand-alone and coupled LWR core calculations at the Pennsylvania State Univ. in cooperation with AREVA NP GmbH (Germany)) and the Technical Univ. of Madrid. To enable COBRA-TF for academic and industrial applications including safety margins evaluations and LWR core design analyses, the code programming, numerics, and basic models were revised and substantially improved. The code has undergone through an extensive validation, verification, and qualification program. (authors)

Poster - 28: Shielding of X-ray Rooms in Ontario in the Absence of Best Practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frimeth, Jeff; Richer, Jeff; Nesbitt, James

This poster will be strictly based on the Healing Arts Radiation Protection (HARP) Act, Regulation 543 under this Act (X-ray Safety Code), and personal communication the presenting author has had. In Ontario, the process of approval of an X-ray machine installation by the Director of the X-ray Inspection Service (XRIS) follows a certain protocol. Initially, the applicant submits a series of forms, including recommended shielding amounts, in order to satisfy the law. This documentation is then transferred to a third-party vendor (i.e. a professional engineer – P.Eng.) outsourced by the Ministry of Health and Long-term Care (MOHLTC). The P.Eng. thenmore » evaluates the submitted documentation for appropriate fulfillment of the HARP Act and Reg. 543 requirements. If the P.Eng.’s evaluation of the documentation is to their satisfaction, the XRIS is then notified. Finally, the Director will then issue a letter of approval to install the equipment at the facility. The methodology required to be used by the P.Eng. in order to determine the required amounts of protective barriers, and recommended to be used by the applicant, is contained within Safety Code 20A. However, Safety Code 35 has replaced the obsolete Safety Code 20A document and employs best practices in shielding design. This talk will focus further on specific intentions and limitations of Safety Code 20A. Furthermore, this talk will discuss the definition of the “practice of professional engineering” in Ontario. COMP members who are involved in shielding design are strongly encouraged to attend.« less

24 CFR 92.251 - Property standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

24 CFR 92.251 - Property standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

24 CFR 92.251 - Property standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

24 CFR 92.251 - Property standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., as applicable, one of three model codes: Uniform Building Code (ICBO), National Building Code (BOCA), Standard (Southern) Building Code (SBCCI); or the Council of American Building Officials (CABO) one or two...) Housing that is constructed or rehabilitated with HOME funds must meet all applicable local codes...

Hydrogen and Fuel Cell Technology | Transportation Research | NREL

Science.gov Websites

Outlines Safety Considerations for Hydrogen Technologies While safety requirements for industrial uses of vehicles have created the need for additional safety requirements. The new Hydrogen Technologies Safety hydrogen safety in context. For example, code officials reviewing permit applications for hydrogen projects

1 CFR 21.14 - Deviations from standard organization of the Code of Federal Regulations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Deviations from standard organization of the... CODIFICATION General Numbering § 21.14 Deviations from standard organization of the Code of Federal Regulations. (a) Any deviation from standard Code of Federal Regulations designations must be approved in advance...

Delay Analysis of Car-to-Car Reliable Data Delivery Strategies Based on Data Mulling with Network Coding

NASA Astrophysics Data System (ADS)

Park, Joon-Sang; Lee, Uichin; Oh, Soon Young; Gerla, Mario; Lun, Desmond Siumen; Ro, Won Woo; Park, Joonseok

Vehicular ad hoc networks (VANET) aims to enhance vehicle navigation safety by providing an early warning system: any chance of accidents is informed through the wireless communication between vehicles. For the warning system to work, it is crucial that safety messages be reliably delivered to the target vehicles in a timely manner and thus reliable and timely data dissemination service is the key building block of VANET. Data mulling technique combined with three strategies, network codeing, erasure coding and repetition coding, is proposed for the reliable and timely data dissemination service. Particularly, vehicles in the opposite direction on a highway are exploited as data mules, mobile nodes physically delivering data to destinations, to overcome intermittent network connectivity cause by sparse vehicle traffic. Using analytic models, we show that in such a highway data mulling scenario the network coding based strategy outperforms erasure coding and repetition based strategies.

Scanning for safety: an integrated approach to improved bar-code medication administration.

PubMed

Early, Cynde; Riha, Chris; Martin, Jennifer; Lowdon, Karen W; Harvey, Ellen M

2011-03-01

This is a review of lessons learned in the postimplementation evaluation of a bar-code medication administration technology implemented at a major tertiary-care hospital in 2001. In 2006, with a bar-code medication administration scan compliance rate of 82%, a near-miss sentinel event prompted review of this technology as part of an institutional recommitment to a "culture of safety." Multifaceted problems with bar-code medication administration created an environment of circumventing safeguards as demonstrated by an increase in manual overrides to ensure timely medication administration. A multiprofessional team composed of nursing, pharmacy, human resources, quality, and technical services formalized. Each step in the bar-code medication administration process was reviewed. Technology, process, and educational solutions were identified and implemented systematically. Overall compliance with bar-code medication administration rose from 82% to 97%, which resulted in a calculated cost avoidance of more than $2.8 million during this time frame of the project.

Overview of the H.264/AVC video coding standard

NASA Astrophysics Data System (ADS)

Luthra, Ajay; Topiwala, Pankaj N.

2003-11-01

H.264/MPEG-4 AVC is the latest coding standard jointly developed by the Video Coding Experts Group (VCEG) of ITU-T and Moving Picture Experts Group (MPEG) of ISO/IEC. It uses state of the art coding tools and provides enhanced coding efficiency for a wide range of applications including video telephony, video conferencing, TV, storage (DVD and/or hard disk based), streaming video, digital video creation, digital cinema and others. In this paper an overview of this standard is provided. Some comparisons with the existing standards, MPEG-2 and MPEG-4 Part 2, are also provided.

Requirements for construction of nuclear system components at elevated temperatures (supplement to ASME Code Cases 1592, 1593, 1594, 1595, and 1596)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This standard provides rules for the construction of Class 1 nuclear components, parts, and appurtenances for use at elevated temperatures. This standard is a complete set of requirements only when used in conjunction with Section III of the ASME Boiler and Pressure Vessel Code (ASME Code) and addenda, ASME Code Cases 1592, 1593, 1594, 1595, and 1596, and RDT E 15-2NB. Unmodified paragraphs of the referenced Code Cases are not repeated in this standard but are a part of the requirements of this standard.

Occupationally related hydrogen sulfide deaths in the United States from 1984 to 1994.

PubMed

Fuller, D C; Suruda, A J

2000-09-01

Alice Hamilton described fatal work injuries from acute hydrogen sulfide poisonings in 1925 in her book Industrial Poisons in the United States. There is no unique code for H2S poisoning in the International Classification of Diseases, 9th Revision; therefore, these deaths cannot be identified easily from vital records. We reviewed US Occupational Safety and Health Administration (OSHA) investigation records for the period 1984 to 1994 for mention of hazardous substance 1480 (hydrogen sulfide). There were 80 fatalities from hydrogen sulfide in 57 incidents, with 19 fatalities and 36 injuries among coworkers attempting to rescue fallen workers. Only 17% of the deaths were at workplaces covered by collective bargaining agreements. OSHA issued citations for violation of respiratory protection and confined space standards in 60% of the fatalities. The use of hydrogen sulfide detection equipment, air-supplied respirators, and confined space safety training would have prevented most of the fatalities.

Prevalence of workers with shifts in hearing by industry: a comparison of OSHA and NIOSH Hearing Shift Criteria.

PubMed

Masterson, Elizabeth A; Sweeney, Marie Haring; Deddens, James A; Themann, Christa L; Wall, David K

2014-04-01

The purpose of this study was to compare the prevalence of workers with National Institute for Occupational Safety and Health significant threshold shifts (NSTS), Occupational Safety and Health Administration standard threshold shifts (OSTS), and with OSTS with age correction (OSTS-A), by industry using North American Industry Classification System codes. From 2001 to 2010, worker audiograms were examined. Prevalence and adjusted prevalence ratios for NSTS were estimated by industry. NSTS, OSTS, and OSTS-A prevalences were compared by industry. Twenty percent of workers had an NSTS, 14% had an OSTS, and 6% had an OSTS-A. For most industries, the OSTS and OSTS-A criteria identified 28% to 36% and 66% to 74% fewer workers than the NSTS criteria, respectively. Use of NSTS criteria allowing for earlier detection of shifts in hearing is recommended for improved prevention of occupational hearing loss.

Prevalence of Workers with Shifts in Hearing by Industry: A Comparison of OSHA and NIOSH Hearing Shift Criteria

PubMed Central

Masterson, Elizabeth A.; Sweeney, Marie Haring; Deddens, James A.; Themann, Christa L.; Wall, David K.

2015-01-01

Objective The purpose of this study was to compare the prevalence of workers with National Institute for Occupational Safety and Health significant threshold shifts (NSTS), Occupational Safety and Health Administration standard threshold shifts (OSTS), and with OSTS with age correction (OSTS-A), by industry using North American Industry Classification System codes. Methods 2001-2010 worker audiograms were examined. Prevalence and adjusted prevalence ratios for NSTS were estimated by industry. NSTS, OSTS and OSTS-A prevalences were compared by industry. Results 20% of workers had an NSTS, 14% had an OSTS and 6% had an OSTS-A. For most industries, the OSTS and OSTS-A criteria identified 28-36% and 66-74% fewer workers than the NSTS criteria, respectively. Conclusions Use of NSTS criteria allowing for earlier detection of shifts in hearing is recommended for improved prevention of occupational hearing loss. PMID:24662953

Research on the management and endorsement of nuclear safety standards in the United States and its revelation for China

NASA Astrophysics Data System (ADS)

Liu, Ting; Tian, Yu; Yang, Lili; Gao, Siyi; Song, Dahu

2018-01-01

This paper introduces the American standard system, the Nuclear Regulatory Commission (NRC)’s responsibility, NRC nuclear safety regulations and standards system, studies on NRC’s standards management and endorsement mode, analyzes the characteristics of NRC standards endorsement management, and points out its disadvantages. This paper draws revelation from the standard management and endorsement model of NRC and points suggestion to China’s nuclear and radiation safety standards management.The issue of the “Nuclear Safety Law”plays an important role in China’s nuclear and radiation safety supervision. Nuclear and radiation safety regulations and standards are strong grips on the implementation of “Nuclear Safety Law”. This paper refers on the experience of international advanced countriy, will effectively promote the improvement of the endorsed management of China’s nuclear and radiation safety standards.

Analysis of the technology acceptance model in examining hospital nurses' behavioral intentions toward the use of bar code medication administration.

PubMed

Song, Lunar; Park, Byeonghwa; Oh, Kyeung Mi

2015-04-01

Serious medication errors continue to exist in hospitals, even though there is technology that could potentially eliminate them such as bar code medication administration. Little is known about the degree to which the culture of patient safety is associated with behavioral intention to use bar code medication administration. Based on the Technology Acceptance Model, this study evaluated the relationships among patient safety culture and perceived usefulness and perceived ease of use, and behavioral intention to use bar code medication administration technology among nurses in hospitals. Cross-sectional surveys with a convenience sample of 163 nurses using bar code medication administration were conducted. Feedback and communication about errors had a positive impact in predicting perceived usefulness (β=.26, P<.01) and perceived ease of use (β=.22, P<.05). In a multiple regression model predicting for behavioral intention, age had a negative impact (β=-.17, P<.05); however, teamwork within hospital units (β=.20, P<.05) and perceived usefulness (β=.35, P<.01) both had a positive impact on behavioral intention. The overall bar code medication administration behavioral intention model explained 24% (P<.001) of the variance. Identified factors influencing bar code medication administration behavioral intention can help inform hospitals to develop tailored interventions for RNs to reduce medication administration errors and increase patient safety by using this technology.

Residential building codes, affordability, and health protection: a risk-tradeoff approach.

PubMed

Hammitt, J K; Belsky, E S; Levy, J I; Graham, J D

1999-12-01

Residential building codes intended to promote health and safety may produce unintended countervailing risks by adding to the cost of construction. Higher construction costs increase the price of new homes and may increase health and safety risks through "income" and "stock" effects. The income effect arises because households that purchase a new home have less income remaining for spending on other goods that contribute to health and safety. The stock effect arises because suppression of new-home construction leads to slower replacement of less safe housing units. These countervailing risks are not presently considered in code debates. We demonstrate the feasibility of estimating the approximate magnitude of countervailing risks by combining the income effect with three relatively well understood and significant home-health risks. We estimate that a code change that increases the nationwide cost of constructing and maintaining homes by $150 (0.1% of the average cost to build a single-family home) would induce offsetting risks yielding between 2 and 60 premature fatalities or, including morbidity effects, between 20 and 800 lost quality-adjusted life years (both discounted at 3%) each year the code provision remains in effect. To provide a net health benefit, the code change would need to reduce risk by at least this amount. Future research should refine these estimates, incorporate quantitative uncertainty analysis, and apply a full risk-tradeoff approach to real-world case studies of proposed code changes.

The new interactive CESAR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, P.B.; Yatabe, M.

1987-01-01

In this report the Nuclear Criticality Safety Analytical Methods Resource Center describes a new interactive version of CESAR, a critical experiments storage and retrieval program available on the Nuclear Criticality Information System (NCIS) database at Lawrence Livermore National Laboratory. The original version of CESAR did not include interactive search capabilities. The CESAR database was developed to provide a convenient, readily accessible means of storing and retrieving code input data for the SCALE Criticality Safety Analytical Sequences and the codes comprising those sequences. The database includes data for both cross section preparation and criticality safety calculations. 3 refs., 1 tab.

New interactive CESAR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, P.B.; Yatabe, M.

1987-01-01

The Nuclear Criticality Safety Analytical Methods Resource Center announces the availability of a new interactive version of CESAR, a critical experiments storage and retrieval program available on the Nuclear Criticality Information System (NCIS) data base at Lawrence Livermore National Laboratory. The original version of CESAR did not include interactive search capabilities. The CESAR data base was developed to provide a convenient, readily accessible means of storing and retrieving code input data for the SCALE criticality safety analytical sequences and the codes comprising those sequences. The data base includes data for both cross-section preparation and criticality safety calculations.

Progress of IRSN R&D on ITER Safety Assessment

NASA Astrophysics Data System (ADS)

Van Dorsselaere, J. P.; Perrault, D.; Barrachin, M.; Bentaib, A.; Gensdarmes, F.; Haeck, W.; Pouvreau, S.; Salat, E.; Seropian, C.; Vendel, J.

2012-08-01

The French "Institut de Radioprotection et de Sûreté Nucléaire" (IRSN), in support to the French "Autorité de Sûreté Nucléaire", is analysing the safety of ITER fusion installation on the basis of the ITER operator's safety file. IRSN set up a multi-year R&D program in 2007 to support this safety assessment process. Priority has been given to four technical issues and the main outcomes of the work done in 2010 and 2011 are summarized in this paper: for simulation of accident scenarios in the vacuum vessel, adaptation of the ASTEC system code; for risk of explosion of gas-dust mixtures in the vacuum vessel, adaptation of the TONUS-CFD code for gas distribution, development of DUST code for dust transport, and preparation of IRSN experiments on gas inerting, dust mobilization, and hydrogen-dust mixtures explosion; for evaluation of the efficiency of the detritiation systems, thermo-chemical calculations of tritium speciation during transport in the gas phase and preparation of future experiments to evaluate the most influent factors on detritiation; for material neutron activation, adaptation of the VESTA Monte Carlo depletion code. The first results of these tasks have been used in 2011 for the analysis of the ITER safety file. In the near future, this R&D global programme may be reoriented to account for the feedback of the latter analysis or for new knowledge.

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

Verification and Validation in a Rapid Software Development Process

NASA Technical Reports Server (NTRS)

Callahan, John R.; Easterbrook, Steve M.

1997-01-01

The high cost of software production is driving development organizations to adopt more automated design and analysis methods such as rapid prototyping, computer-aided software engineering (CASE) tools, and high-level code generators. Even developers of safety-critical software system have adopted many of these new methods while striving to achieve high levels Of quality and reliability. While these new methods may enhance productivity and quality in many cases, we examine some of the risks involved in the use of new methods in safety-critical contexts. We examine a case study involving the use of a CASE tool that automatically generates code from high-level system designs. We show that while high-level testing on the system structure is highly desirable, significant risks exist in the automatically generated code and in re-validating releases of the generated code after subsequent design changes. We identify these risks and suggest process improvements that retain the advantages of rapid, automated development methods within the quality and reliability contexts of safety-critical projects.

45 CFR 156.1110 - Establishment of patient safety standards for QHP issuers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... STANDARDS RELATED TO EXCHANGES Quality Standards § 156.1110 Establishment of patient safety standards for QHP issuers. (a) Patient safety standards. A QHP issuer that contracts with a hospital with greater... 45 Public Welfare 1 2014-10-01 2014-10-01 false Establishment of patient safety standards for QHP...

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2012 CFR

2012-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2014 CFR

2014-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2013 CFR

2013-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2011 CFR

2011-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

25 CFR 900.125 - What shall a construction contract proposal contain?

Code of Federal Regulations, 2010 CFR

2010-04-01

... tribal building codes and engineering standards; (4) Structural integrity; (5) Accountability of funds..., standards and methods (including national, regional, state, or tribal building codes or construction... methods (including national, regional, state, or tribal building codes or construction industry standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation.

PubMed

Lindholm, Henrik; Egels-Zandén, Niklas; Rudén, Christina

2016-10-01

In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. To examine how well suppliers' chemical health and safety performance complies with buyers' CSR policies and whether audited factories improve their performance. CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits.

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation

PubMed Central

2016-01-01

Background In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. Objectives To examine how well suppliers’ chemical health and safety performance complies with buyers’ CSR policies and whether audited factories improve their performance. Methods CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Results Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Conclusions Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits. PMID:27611103

Current and anticipated uses of thermal hydraulic codes in Korea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Kyung-Doo; Chang, Won-Pyo

1997-07-01

In Korea, the current uses of thermal hydraulic codes are categorized into 3 areas. The first application is in designing both nuclear fuel and NSSS. The codes have usually been introduced based on the technology transfer programs agreed between KAERI and the foreign vendors. Another area is in the supporting of the plant operations and licensing by the utility. The third category is research purposes. In this area assessments and some applications to the safety issue resolutions are major activities using the best estimate thermal hydraulic codes such as RELAP5/MOD3 and CATHARE2. Recently KEPCO plans to couple thermal hydraulic codesmore » with a neutronics code for the design of the evolutionary type reactor by 2004. KAERI also plans to develop its own best estimate thermal hydraulic code, however, application range is different from KEPCO developing code. Considering these activities, it is anticipated that use of the best estimate hydraulic analysis code developed in Korea may be possible in the area of safety evaluation within 10 years.« less

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true General safety and health... Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health standards. (a) Every...

77 FR 76005 - Submission for OMB Review; Comment Request-Safety Standard for Walk-Behind Power Lawn Mowers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety Commission... with the Commission's safety standard for walk- behind power lawn mowers. DATES: Written comments on... of approval of the collection of information required in the Safety Standard for Walk-Behind Power...

Patient safety incidents in hospice care: observations from interdisciplinary case conferences.

PubMed

Oliver, Debra Parker; Demiris, George; Wittenberg-Lyles, Elaine; Gage, Ashley; Dewsnap-Dreisinger, Mariah L; Luetkemeyer, Jamie

2013-12-01

In the home hospice environment, issues arise every day presenting challenges to the safety, care, and quality of the dying experience. The literature pertaining to the safety challenges in this environment is limited. The study explored two research questions; 1) What types of patient safety incidents occur in the home hospice setting? 2) How many of these incidents are recognized by the hospice staff and/or the patient or caregiver as a patient safety incident? Video-recordings of hospice interdisciplinary team case conferences were reviewed and coded for patient safety incidents. Patient safety incidents were defined as any event or circumstance that could have resulted or did result in unnecessary harm to the patient or caregiver, or that could have resulted or did result in a negative impact on the quality of the dying experience for the patient. Codes for categories of patient safety incidents were based on the International Classification for Patient Safety. The setting for the study included two rural hospice programs in one Midwestern state in the United States. One hospice team had two separately functioning teams, the second hospice had three teams. 54 video-recordings were reviewed and coded. Patient safety incidents were identified that involved issues in clinical process, medications, falls, family or caregiving, procedural problems, documentation, psychosocial issues, administrative challenges and accidents. This study distinguishes categories of patient safety events that occur in home hospice care. Although the scope and definition of potential patient safety incidents in hospice is unique, the events observed in this study are similar to those observed with in other settings. This study identifies an operating definition and a potential classification for further research on patient safety incidents in hospice. Further research and consensus building of the definition of patient safety incidents and patient safety incidents in this setting is recommended.

Creation of the Naturalistic Engagement in Secondary Tasks (NEST) distracted driving dataset.

PubMed

Owens, Justin M; Angell, Linda; Hankey, Jonathan M; Foley, James; Ebe, Kazutoshi

2015-09-01

Distracted driving has become a topic of critical importance to driving safety research over the past several decades. Naturalistic driving data offer a unique opportunity to study how drivers engage with secondary tasks in real-world driving; however, the complexities involved with identifying and coding relevant epochs of naturalistic data have limited its accessibility to the general research community. This project was developed to help address this problem by creating an accessible dataset of driver behavior and situational factors observed during distraction-related safety-critical events and baseline driving epochs, using the Strategic Highway Research Program 2 (SHRP2) naturalistic dataset. The new NEST (Naturalistic Engagement in Secondary Tasks) dataset was created using crashes and near-crashes from the SHRP2 dataset that were identified as including secondary task engagement as a potential contributing factor. Data coding included frame-by-frame video analysis of secondary task and hands-on-wheel activity, as well as summary event information. In addition, information about each secondary task engagement within the trip prior to the crash/near-crash was coded at a higher level. Data were also coded for four baseline epochs and trips per safety-critical event. 1,180 events and baseline epochs were coded, and a dataset was constructed. The project team is currently working to determine the most useful way to allow broad public access to the dataset. We anticipate that the NEST dataset will be extraordinarily useful in allowing qualified researchers access to timely, real-world data concerning how drivers interact with secondary tasks during safety-critical events and baseline driving. The coded dataset developed for this project will allow future researchers to have access to detailed data on driver secondary task engagement in the real world. It will be useful for standalone research, as well as for integration with additional SHRP2 data to enable the conduct of more complex research. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Construction safety program for the National Ignition Facility, July 30, 1999 (NIF-0001374-OC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benjamin, D W

1999-07-30

These rules apply to all LLNL employees, non-LLNL employees (including contract labor, supplemental labor, vendors, personnel matrixed/assigned from other National Laboratories, participating guests, visitors and students) and contractors/subcontractors. The General Rules-Code of Safe Practices shall be used by management to promote accident prevention through indoctrination, safety and health training and on-the-job application. As a condition for contracts award, all contractors and subcontractors and their employees must certify on Form S and H A-l that they have read and understand, or have been briefed and understand, the National Ignition Facility OCIP Project General Rules-Code of Safe Practices. (An interpreter must briefmore » those employees who do not speak or read English fluently.) In addition, all contractors and subcontractors shall adopt a written General Rules-Code of Safe Practices that relates to their operations. The General Rules-Code of Safe Practices must be posted at a conspicuous location at the job site office or be provided to each supervisory employee who shall have it readily available. Copies of the General Rules-Code of Safe Practices can also be included in employee safety pamphlets.« less

Alternative Formats to Achieve More Efficient Energy Codes for Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.; Rosenberg, Michael I.; Halverson, Mark A.

2013-01-26

This paper identifies and examines several formats or structures that could be used to create the next generation of more efficient energy codes and standards for commercial buildings. Pacific Northwest National Laboratory (PNNL) is funded by the U.S. Department of Energy’s Building Energy Codes Program (BECP) to provide technical support to the development of ANSI/ASHRAE/IES Standard 90.1. While the majority of PNNL’s ASHRAE Standard 90.1 support focuses on developing and evaluating new requirements, a portion of its work involves consideration of the format of energy standards. In its current working plan, the ASHRAE 90.1 committee has approved an energy goalmore » of 50% improvement in Standard 90.1-2013 relative to Standard 90.1-2004, and will likely be considering higher improvement targets for future versions of the standard. To cost-effectively achieve the 50% goal in manner that can gain stakeholder consensus, formats other than prescriptive must be considered. Alternative formats that include reducing the reliance on prescriptive requirements may make it easier to achieve these aggressive efficiency levels in new codes and standards. The focus on energy code and standard formats is meant to explore approaches to presenting the criteria that will foster compliance, enhance verification, and stimulate innovation while saving energy in buildings. New formats may also make it easier for building designers and owners to design and build the levels of efficiency called for in the new codes and standards. This paper examines a number of potential formats and structures, including prescriptive, performance-based (with sub-formats of performance equivalency and performance targets), capacity constraint-based, and outcome-based. The paper also discusses the pros and cons of each format from the viewpoint of code users and of code enforcers.« less

75 FR 59658 - Airworthiness Directives; SOCATA Model TBM 700 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

... drive assemblies. The European Aviation Safety Agency (EASA), which is the Technical Agent for the... United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section... Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed...

Efficient Type Representation in TAL

NASA Technical Reports Server (NTRS)

Chen, Juan

2009-01-01

Certifying compilers generate proofs for low-level code that guarantee safety properties of the code. Type information is an essential part of safety proofs. But the size of type information remains a concern for certifying compilers in practice. This paper demonstrates type representation techniques in a large-scale compiler that achieves both concise type information and efficient type checking. In our 200,000-line certifying compiler, the size of type information is about 36% of the size of pure code and data for our benchmarks, the best result to the best of our knowledge. The type checking time is about 2% of the compilation time.

Development of the FHR advanced natural circulation analysis code and application to FHR safety analysis

DOE PAGES

Guo, Z.; Zweibaum, N.; Shao, M.; ...

2016-04-19

The University of California, Berkeley (UCB) is performing thermal hydraulics safety analysis to develop the technical basis for design and licensing of fluoride-salt-cooled, high-temperature reactors (FHRs). FHR designs investigated by UCB use natural circulation for emergency, passive decay heat removal when normal decay heat removal systems fail. The FHR advanced natural circulation analysis (FANCY) code has been developed for assessment of passive decay heat removal capability and safety analysis of these innovative system designs. The FANCY code uses a one-dimensional, semi-implicit scheme to solve for pressure-linked mass, momentum and energy conservation equations. Graph theory is used to automatically generate amore » staggered mesh for complicated pipe network systems. Heat structure models have been implemented for three types of boundary conditions (Dirichlet, Neumann and Robin boundary conditions). Heat structures can be composed of several layers of different materials, and are used for simulation of heat structure temperature distribution and heat transfer rate. Control models are used to simulate sequences of events or trips of safety systems. A proportional-integral controller is also used to automatically make thermal hydraulic systems reach desired steady state conditions. A point kinetics model is used to model reactor kinetics behavior with temperature reactivity feedback. The underlying large sparse linear systems in these models are efficiently solved by using direct and iterative solvers provided by the SuperLU code on high performance machines. Input interfaces are designed to increase the flexibility of simulation for complicated thermal hydraulic systems. In conclusion, this paper mainly focuses on the methodology used to develop the FANCY code, and safety analysis of the Mark 1 pebble-bed FHR under development at UCB is performed.« less

Workplace Safety and Health Topics: Safety & Prevention

MedlinePlus

... Health Records (EHRs) and Patient Work Information Engineering Controls Equipment Design in Mining Falls in the Workplace Green, Safe, and Healthy Jobs – Prevention through Design Hierarchy of Controls Industry and Occupation Coding and Support Logging Safety ...

78 FR 37706 - Safety Standards for Infant Walkers and Infant Swings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

... Danny Keysar Child Product Safety Notification Act, if ASTM revises the underlying voluntary standard... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1216 and 1223 Safety Standards for Infant Walkers... the Danny Keysar Child Product Safety Notification Act, the U.S. Consumer Product Safety Commission...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

76 FR 43743 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...

An exploratory study of the relationship between socioeconomic status and motor vehicle safety features.

PubMed

Girasek, Deborah C; Taylor, Brett

2010-04-01

The purpose of this study was to assess the association between motor vehicle owners' socioeconomic status (SES) and the safety of their motor vehicles. Truncated vehicle identification numbers (VINs) were obtained from the Maryland Motor Vehicle Administration office. ZIP code-level income and educational data were assigned to each VIN. Software was used to identify safety-related vehicle characteristics including crash test rating, availability of electronic stability control and side impact air bags, age, and weight. Correlations and analyses of variance were performed to assess whether a ZIP code's median household income and educational level were associated with its proportion of registered vehicles with safety features. For 13 of the 16 correlations performed, SES was significantly associated with the availability of vehicle safety features in a direction that favored upper-income individuals. Vehicle weight was not associated with income or education. When ZIP codes were divided into median household income quintiles, their mean proportions of safety features also differed significantly, in the same direction, for availability of electronic stability control, side impact air bags, vehicle age, and crash test ratings. Safer motor vehicles appear to be distributed along socioeconomic lines, with lower income groups experiencing more risk. This previously unidentified mechanism of disparity merits further study and the attention of policy makers.

Perceived heat stress and health effects on construction workers.

PubMed

Dutta, Priya; Rajiva, Ajit; Andhare, Dileep; Azhar, Gulrez Shah; Tiwari, Abhiyant; Sheffield, Perry

2015-01-01

Increasing heat waves-particularly in urban areas where construction is most prevalent, highlight a need for heat exposure assessment of construction workers. This study aims to characterize the effects of heat on construction workers from a site in Gandhinagar. This study involved a mixed methods approach consisting of a cross sectional survey with anthropometric measurements (n = 219) and four focus groups with construction workers, as well as environmental measurements of heat stress exposure at a construction site. Survey data was collected in two seasons i.e., summer and winter months, and heat illness and symptoms were compared between the two time periods. Thematic coding of focus group data was used to identify vulnerability factors and coping mechanisms of the workers. Heat stress, recorded using a wet bulb globe temperature monitor, was compared to international safety standards. The survey findings suggest that heat-related symptoms increased in summer; 59% of all reports in summer were positive for symptoms (from Mild to Severe) as compared to 41% in winter. Focus groups revealed four dominant themes: (1) Non-occupational stressors compound work stressors; (2) workers were particularly attuned to the impact of heat on their health; (3) workers were aware of heat-related preventive measures; and (4) few resources were currently available to protect workers from heat stress. Working conditions often exceed international heat stress safety thresholds. Female workers and new employees might be at increased risk of illness or injury. This study suggests significant health impacts on construction workers from heat stress exposure in the workplace, showed that heat stress levels were higher than those prescribed by international standards and highlights the need for revision of work practices, increased protective measures, and possible development of indigenous work safety standards for heat exposure.

Perceived heat stress and health effects on construction workers

PubMed Central

Dutta, Priya; Rajiva, Ajit; Andhare, Dileep; Azhar, Gulrez Shah; Tiwari, Abhiyant; Sheffield, Perry

2015-01-01

Introduction: Increasing heat waves-particularly in urban areas where construction is most prevalent, highlight a need for heat exposure assessment of construction workers. This study aims to characterize the effects of heat on construction workers from a site in Gandhinagar. Materials and Methods: This study involved a mixed methods approach consisting of a cross sectional survey with anthropometric measurements (n = 219) and four focus groups with construction workers, as well as environmental measurements of heat stress exposure at a construction site. Survey data was collected in two seasons i.e., summer and winter months, and heat illness and symptoms were compared between the two time periods. Thematic coding of focus group data was used to identify vulnerability factors and coping mechanisms of the workers. Heat stress, recorded using a wet bulb globe temperature monitor, was compared to international safety standards. Results: The survey findings suggest that heat-related symptoms increased in summer; 59% of all reports in summer were positive for symptoms (from Mild to Severe) as compared to 41% in winter. Focus groups revealed four dominant themes: (1) Non-occupational stressors compound work stressors; (2) workers were particularly attuned to the impact of heat on their health; (3) workers were aware of heat-related preventive measures; and (4) few resources were currently available to protect workers from heat stress. Working conditions often exceed international heat stress safety thresholds. Female workers and new employees might be at increased risk of illness or injury. Conclusion: This study suggests significant health impacts on construction workers from heat stress exposure in the workplace, showed that heat stress levels were higher than those prescribed by international standards and highlights the need for revision of work practices, increased protective measures, and possible development of indigenous work safety standards for heat exposure. PMID:26957814

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Programs 219.303 Determining North American Industry Classification System (NAICS) codes and size standards...

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Programs 219.303 Determining North American Industry Classification System (NAICS) codes and size standards...

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Determining North American Industry Classification System (NAICS) codes and size standards. Contracting...

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Determining North American Industry Classification System (NAICS) codes and size standards. Contracting...

48 CFR 19.303 - Determining North American Industry Classification System codes and size standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Industry Classification System codes and size standards. 19.303 Section 19.303 Federal Acquisition... of Small Business Status for Small Business Programs 19.303 Determining North American Industry... North American Industry Classification System (NAICS) code and related small business size standard and...

76 FR 10246 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... regulations and update the standards for VA approval of such facilities, including standards for fire safety... to ``RIN 2900-AN57--Updating Fire Safety [[Page 10247

The EUCLID/V1 Integrated Code for Safety Assessment of Liquid Metal Cooled Fast Reactors. Part 1: Basic Models

NASA Astrophysics Data System (ADS)

Mosunova, N. A.

2018-05-01

The article describes the basic models included in the EUCLID/V1 integrated code intended for safety analysis of liquid metal (sodium, lead, and lead-bismuth) cooled fast reactors using fuel rods with a gas gap and pellet dioxide, mixed oxide or nitride uranium-plutonium fuel under normal operation, under anticipated operational occurrences and accident conditions by carrying out interconnected thermal-hydraulic, neutronics, and thermal-mechanical calculations. Information about the Russian and foreign analogs of the EUCLID/V1 integrated code is given. Modeled objects, equation systems in differential form solved in each module of the EUCLID/V1 integrated code (the thermal-hydraulic, neutronics, fuel rod analysis module, and the burnup and decay heat calculation modules), the main calculated quantities, and also the limitations on application of the code are presented. The article also gives data on the scope of functions performed by the integrated code's thermal-hydraulic module, using which it is possible to describe both one- and twophase processes occurring in the coolant. It is shown that, owing to the availability of the fuel rod analysis module in the integrated code, it becomes possible to estimate the performance of fuel rods in different regimes of the reactor operation. It is also shown that the models implemented in the code for calculating neutron-physical processes make it possible to take into account the neutron field distribution over the fuel assembly cross section as well as other features important for the safety assessment of fast reactors.

Second NASA Workshop on Wiring for Space Applications

NASA Technical Reports Server (NTRS)

1994-01-01

This document contains the proceedings of the Second NASA Workshop on Wiring for Space Applications held at NASA LeRC in Cleveland, OH, 6-7 Oct. 1993. The workshop was sponsored by NASA Headquarters Code QW Office of Safety and Mission Quality, Technical Standards Division and hosted by NASA LeRC, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry, and academia presented and discussed topics on arc tracking phenomena, wiring system design, insulation constructions, and system protection. Presentation materials provided by the various speakers are included in this document.

Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOE/EIS-0285/SA-60) - Rocky Reach - Maple Valley No. 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Mark A.

2002-04-15

Vegetation Management along the Rocky Reach – Maple Valley No. 1 Transmission Line ROW from structure 110/1 to the Maple Valley Substation. The transmission line is a 500 kV line. BPA proposes to clear targeted vegetation along access roads and around tower structures that may impede the operation and maintenance of the subject transmission line. BPA plans to conduct vegetation management along existing access road and around structure landings for the purpose of maintaining access to structures site. All work will be in accordance with the National Electrical Safety Code and BPA standards.

Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOE/EIS-0285/SA-62) - Rocky Reach - Maple Valley

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Mark A.

2002-04-16

Vegetation Management along the Rocky Reach – Maple Valley No. 1 Transmission Line ROW from structure 98/2 to structure 110/1. The transmission line is a 500 kV line. BPA proposes to clear targeted vegetation along access roads and around tower structures that may impede the operation and maintenance of the subject transmission line. BPA plans to conduct vegetation management along existing access road and around structure landings for the purpose of maintaining access to structures site. All work will be in accordance with the National Electrical Safety Code and BPA standards.

TEMPEST Simulations of Collisionless Damping of Geodesic-Acoustic Mode in Edge Plasma Pedestal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, X Q; Xiong, Z; Nevins, W M

The fully nonlinear (full-f) 4D TEMPEST gyrokinetic continuum code produces frequency, collisionless damping of GAM and zonal flow with fully nonlinear Boltzmann electrons for the inverse aspect ratio {epsilon}-scan and the tokamak safety factor q-scan in homogeneous plasmas. The TEMPEST simulation shows that GAM exists in edge plasma pedestal for steep density and temperature gradients, and an initial GAM relaxes to the standard neoclassical residual, rather than Rosenbluth-Hinton residual due to the presence of ion-ion collisions. The enhanced GAM damping explains experimental BES measurements on the edge q scaling of the GAM amplitude.

TEMPEST Simulations of Collisionless Damping of Geodesic-Acoustic Mode in Edge Plasma Pedestal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, X; Xiong, Z; Nevins, W

The fully nonlinear 4D TEMPEST gyrokinetic continuum code produces frequency, collisionless damping of geodesic-acoustic mode (GAM) and zonal flow with fully nonlinear Boltzmann electrons for the inverse aspect ratio {epsilon}-scan and the tokamak safety factor q-scan in homogeneous plasmas. The TEMPEST simulation shows that GAM exists in edge plasma pedestal for steep density and temperature gradients, and an initial GAM relaxes to the standard neoclassical residual, rather than Rosenbluth-Hinton residual due to the presence of ion-ion collisions. The enhanced GAM damping explains experimental BES measurements on the edge q scaling of the GAM amplitude.

[Study on the reorganization of standards related to food contact ceramics and porcelains].

PubMed

Zhang, Jianbo; Zhu, Lei; Zhang, Hong; Liu, Shan; Wang, Zhutian

2014-07-01

To solve the problem of overlap, iterance and conflict among current standards related to food contact ceramics and porcelains. To collect all the current standards related to food contact ceramics and porcelains and reorganize them following the settled principles and method and list the standards that need to be revoked, revised, incorporated, or keep valid and excluded from the food safety standard system. 19 standards were collected in this study and reorganized. The main food safety indexes in these standards were the limits for lead and cadmium that released from food contact ceramics and porcelains. There were released limits for lead and cadmium in 10 standards, including 4 horizontal standards and 6 commodity standards. The provisions in these 10 standards were in conflict. And as a result of this, the 4 horizontal standards were suggested to be incorporated and revised to one food safety standard, while the 6 commodity standards were suggested to be revised and exclude the lead and cadmium provisions. Another 7 commodity standards only referenced provisions for lead and cadmium limits from horizontal standards, and these 7 standards were suggested to be excluded from food safety standard system. There were no food safety indexes in 2 standards of the 19 standards, these standards were considered not related to food safety and no need to be reorganized. There were conflicts about the released limits of lead and cadmium among the current standards related to food contact ceramics and porcelains. So, it is necessary to a set up a new food safety standard for released lead and cadmium permissible limits which can apply to all food contact ceramics and porcelains. This food safety standard should be based on food safety risk assessment and the actual situations of manufacture and usage of food contact ceramics and porcelains. The provisions in international standards and relative standards from other countries can also provide references to this standard.

An examination of some safety issues among commercial motorcyclists in Nigeria: a case study.

PubMed

Arosanyin, Godwin Tunde; Olowosulu, Adekunle Taiwo; Oyeyemi, Gafar Matanmi

2013-01-01

The reduction of road crashes and injuries among motorcyclists in Nigeria requires a system inquiry into some safety issues at pre-crash, crash and post-crash stages to guide action plans. This paper examines safety issues such as age restriction, motorcycle engine capacity, highway code awareness, licence holding, helmet usage, crash involvement, rescue and payment for treatment among commercial motorcyclists. The primary data derived from a structured questionnaire administered to 334 commercial motorcyclists in Samaru, Zaria were analysed using descriptive statistics and logistic regression technique. There was total compliance with age restriction and motorcycle engine capacity. About 41.8% of the operators were not aware of the existence of the highway code. The odds of licence holding increased with highway code awareness, education with above senior secondary as the reference category and earnings. The odds of crash involvement decreased with highway code awareness, earnings and mode of operation. About 84% of the motorcyclists did not use crash helmet, in spite of being aware of the benefit, and 65.4% of motorcycle crashes was found to be with other road users. The promotion of safety among motorcyclists therefore requires strict traffic law enforcement and modification of road design to segregate traffic and protect pedestrians.

Quick Response codes for surgical safety: a prospective pilot study.

PubMed

Dixon, Jennifer L; Smythe, William Roy; Momsen, Lara S; Jupiter, Daniel; Papaconstantinou, Harry T

2013-09-01

Surgical safety programs have been shown to reduce patient harm; however, there is variable compliance. The purpose of this study is to determine if innovative technology such as Quick Response (QR) codes can facilitate surgical safety initiatives. We prospectively evaluated the use of QR codes during the surgical time-out for 40 operations. Feasibility and accuracy were assessed. Perceptions of the current time-out process and the QR code application were evaluated through surveys using a 5-point Likert scale and binomial yes or no questions. At baseline (n = 53), survey results from the surgical team agreed or strongly agreed that the current time-out process was efficient (64%), easy to use (77%), and provided clear information (89%). However, 65% of surgeons felt that process improvements were needed. Thirty-seven of 40 (92.5%) QR codes scanned successfully, of which 100% were accurate. Three scan failures resulted from excessive curvature or wrinkling of the QR code label on the body. Follow-up survey results (n = 33) showed that the surgical team agreed or strongly agreed that the QR program was clearer (70%), easier to use (57%), and more accurate (84%). Seventy-four percent preferred the QR system to the current time-out process. QR codes accurately transmit patient information during the time-out procedure and are preferred to the current process by surgical team members. The novel application of this technology may improve compliance, accuracy, and outcomes. Copyright © 2013 Elsevier Inc. All rights reserved.

7 CFR Exhibit E to Subpart A of... - Voluntary National Model Building Codes

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 12 2013-01-01 2013-01-01 false Voluntary National Model Building Codes E Exhibit E... National Model Building Codes The following documents address the health and safety aspects of buildings and related structures and are voluntary national model building codes as defined in § 1924.4(h)(2) of...

7 CFR Exhibit E to Subpart A of... - Voluntary National Model Building Codes

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 12 2014-01-01 2013-01-01 true Voluntary National Model Building Codes E Exhibit E to... Model Building Codes The following documents address the health and safety aspects of buildings and related structures and are voluntary national model building codes as defined in § 1924.4(h)(2) of this...

7 CFR Exhibit E to Subpart A of... - Voluntary National Model Building Codes

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 12 2012-01-01 2012-01-01 false Voluntary National Model Building Codes E Exhibit E... National Model Building Codes The following documents address the health and safety aspects of buildings and related structures and are voluntary national model building codes as defined in § 1924.4(h)(2) of...

Iterative demodulation and decoding of coded non-square QAM

NASA Technical Reports Server (NTRS)

Li, L.; Divsalar, D.; Dolinar, S.

2003-01-01

Simulation results show that, with iterative demodulation and decoding, coded NS-8QAM performs 0.5 dB better than standard 8QAM and 0.7 dB better than 8PSK at BER= 10(sup -5), when the FEC code is the (15, 11) Hamming code concatenated with a rate-1 accumulator code, while coded NS-32QAM performs 0.25 dB better than standard 32QAM.

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

The Role of Spatial Disorientation in Fatal General Aviation Accidents

NASA Technical Reports Server (NTRS)

Scheuring, RIchard

2005-01-01

In-flight Spatial Disorientation (SD) in pilots is a serious threat to aviation safety. Indeed, SD may play a much larger role in aviation accidents than the approximate 6-8% reported by the National Transportation Safety Board (NTSB) each year, because some accidents coded by the NTSB as aircraft control-not maintained (ACNM) may actually result from SD. The purpose of this study is to determine whether SD is underestimated as a cause of fatal general aviation (GA) accidents in the NTSB database. Fatal GA airplane accidents occurring between January 1995 and December 1999 were reviewed from the NTSB aviation accident database. Cases coded as ACNM or SD as the probable cause were selected for review by a panel of aerospace medicine specialists. Using a rating scale, each rater was instructed to determine if SD was the probable cause of the accident. Agreement between the raters and agreement between the raters and the NTSB were evaluated by Kappa statistics. The raters agreed that 11 out of 20 (55%) accidents coded by the NTSB as ACNM were probably caused by SD (p less than 0.05). Agreement between the raters and the NTSB did not reach significance (p greater than 0.05). The 95% C.I. for the sampling population estimated that between 33-77% of cases that the NTSB identified as ACNM could be identified by aerospace medicine experts as SD. Aerospace medicine specialists agreed that some cases coded by the NTSB as ACNM were probably caused by SD. Consequently, a larger number of accidents may be caused by the pilot succumbing to SD than indicated in the NTSB database. This new information should encourage regulating agencies to insure that pilots receive SD recognition training, enabling them to take appropriate corrective actions during flight. This could lead to new training standards, ultimately saving lives among GA airplane pilots.

76 FR 57635 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Standards Service Aviation Safety Inspectors; Correction AGENCY: Federal Aviation Administration (FAA), DOT... ``Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors'' (76 FR 52231... of, a Flight Standards Service Aviation Safety Inspector, and had direct responsibility to inspect...

48 CFR 19.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 19.303 Section 19.303 Federal Acquisition... Classification System (NAICS) codes and size standards. (a) The contracting officer shall determine the...

PharmARTS: terminology web services for drug safety data coding and retrieval.

PubMed

Alecu, Iulian; Bousquet, Cédric; Degoulet, Patrice; Jaulent, Marie-Christine

2007-01-01

MedDRA and WHO-ART are the terminologies used to encode drug safety reports. The standardisation achieved with these terminologies facilitates: 1) The sharing of safety databases; 2) Data mining for the continuous reassessment of benefit-risk ratio at national or international level or in the pharmaceutical industry. There is some debate about the capacity of these terminologies for retrieving case reports related to similar medical conditions. We have developed a resource that allows grouping similar medical conditions more effectively than WHO-ART and MedDRA. We describe here a software tool facilitating the use of this terminological resource thanks to an RDF framework with support for RDF Schema inferencing and querying. This tool eases coding and data retrieval in drug safety.

Developing regulations for occupational exposures to health hazards in Malaysia.

PubMed

Rampal, Krishna Gopal; Mohd Nizam, J

2006-11-01

In Malaysia exposures in the workplace are regulated under the Factories and Machinery Act (FMA), 1967 and also under the more comprehensive Occupational Safety and Health Act (OSHA) enacted in 1994. With OSHA 1994 the philosophy of legislating safety and health in the workplace changed from one that was very prescriptive and containing detailed technical provisions under FMA, 1967 to one that is more flexible and encourages self-regulation under OSHA 1994. OSHA 1994 is supported by regulations, codes of practices and guidelines to further clarify the provisions in the Act. Under the FMA 1967 emphasis was on safety while with OSHA 1994 there has been equal emphasis on addressing health hazards in the workplace. Regulations for occupational exposures are developed by the Department of Occupational Safety and Health with tripartite and stakeholder consultation. When developing these regulations International Labor Organization Conventions, laws of other countries and occupational exposure standards adopted internationally are reviewed. The government also conducts surveys to collect information on both exposures and health effects in workplaces to have better understanding on specific occupational health problems. Effective law enforcement is crucial in ensuring compliance to safety and health law. The challenge at the moment is to ensure all employers and employees, particularly those in the small and medium enterprises, understand and comply with the provisions stipulated in the legislation.

A strategic framework for the development and enhancement of safety culture in the artificial tanning sector in Greece.

PubMed

Petri, Aspasia; Karabetsos, Efthymios

2018-06-08

Herein, the strategic framework for the development and enhancement of safety culture in the artificial tanning sector in Greece is presented. This framework has been designed and promoted by the competent national regulatory authority, which is the Greek Atomic Energy Commission (EEAE). The aim is to ensure a common understanding regarding ultraviolet radiation (UVR) and artificial tanning among the artificial tanning professionals, the stakeholders and the general public. The strategic framework is founded on the international organizations' recommendations, the EU requirements and the relevant technical standards. It is comprised of three autonomous but interconnected components: A) A sunbed operators' e-training course and certification process, B) A code of practice addressed individually to the business owners, the sunbeds operators and the sunbeds users, C) Communication strategies aiming to raise awareness regarding UVR and artificial tanning to all the interested parties. The artificial tanning safety culture framework presented here is the policy option that EEAE undertook and it is embedded in the upcoming legislation and regulations for the provision of artificial tanning services in Greece. EEAE considers that the structure of the artificial tanning safety culture strategic framework will serve as the guide for the development and promotion of relevant safety culture strategic frameworks for the provision of aesthetic/wellness services that utilize other non-ionizing radiation sources, which currently don't exist. © 2018 IOP Publishing Ltd.

Through the Past Decade: How Advanced Energy Design Guides have influenced the Design Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Bing; Athalye, Rahul A.

Advanced Energy Design Guides (AEDGs) were originally developed intended to provide a simple approach to building professionals seeking energy efficient building designs better than ASHRAE Standard 90.1. Since its first book was released in 2004, the AEDG series provided inspiration for the design industry and were seen by designers as a starting point for buildings that wished to go beyond minimum codes and standards. In addition, U.S. Department of Energy’s successful Commercial Building Partnerships (CBP) program leveraged many of the recommendations from the AEDGs to achieve 50% energy savings over ASHRAE Standard 90.1-2004 for prototypical designs of large commercial entitiesmore » in the retail, banking and lodging sectors. Low-energy technologies and strategies developed during the CBP process have been applied by commercial partners throughout their national portfolio of buildings. Later, the AEDGs served as the perfect platform for both Standard 90.1 and ASHRAE’s high performance buildings standard, Standard 189.1. What was high performance a few years ago, however, has become minimum code today. Indeed, most of the prescriptive envelope component requirements in ASHRAE Standard 90.1-2013 are values recommended in the 50% AEDGs several years ago. Similarly, AEDG strategies and recommendations have penetrated the lighting and HVAC sections of both Standard 189.1 and Standard 90.1. Finally, as we look to the future of codes and standards, the AEDGs are serving as a blueprint for how minimum code requirements could be expressed. By customizing codes to specific building types, design strategies tailored for individual buildings could be prescribed as minimum code, just like in the AEDGs. This paper describes the impact that AEDGs have had over the last decade on the design industry and how they continue to influence the future of codes and Standards. From design professionals to code officials, everyone in the building industry has been affected by the AEDGs.« less

Neutron dose rate analysis on HTGR-10 reactor using Monte Carlo code

NASA Astrophysics Data System (ADS)

Suwoto; Adrial, H.; Hamzah, A.; Zuhair; Bakhri, S.; Sunaryo, G. R.

2018-02-01

The HTGR-10 reactor is cylinder-shaped core fuelled with kernel TRISO coated fuel particles in the spherical pebble with helium cooling system. The outlet helium gas coolant temperature outputted from the reactor core is designed to 700 °C. One advantage HTGR type reactor is capable of co-generation, as an addition to generating electricity, the reactor was designed to produce heat at high temperature can be used for other processes. The spherical fuel pebble contains 8335 TRISO UO2 kernel coated particles with enrichment of 10% and 17% are dispersed in a graphite matrix. The main purpose of this study was to analysis the distribution of neutron dose rates generated from HTGR-10 reactors. The calculation and analysis result of neutron dose rate in the HTGR-10 reactor core was performed using Monte Carlo MCNP5v1.6 code. The problems of double heterogeneity in kernel fuel coated particles TRISO and spherical fuel pebble in the HTGR-10 core are modelled well with MCNP5v1.6 code. The neutron flux to dose conversion factors taken from the International Commission on Radiological Protection (ICRP-74) was used to determine the dose rate that passes through the active core, reflectors, core barrel, reactor pressure vessel (RPV) and a biological shield. The calculated results of neutron dose rate with MCNP5v1.6 code using a conversion factor of ICRP-74 (2009) for radiation workers in the radial direction on the outside of the RPV (radial position = 220 cm from the center of the patio HTGR-10) provides the respective value of 9.22E-4 μSv/h and 9.58E-4 μSv/h for enrichment 10% and 17%, respectively. The calculated values of neutron dose rates are compliant with BAPETEN Chairman’s Regulation Number 4 Year 2013 on Radiation Protection and Safety in Nuclear Energy Utilization which sets the limit value for the average effective dose for radiation workers 20 mSv/year or 10μSv/h. Thus the protection and safety for radiation workers to be safe from the radiation source has been fulfilled. From the result analysis, it can be concluded that the model of calculation result of neutron dose rate for HTGR-10 core has met the required radiation safety standards.

24 CFR 51.203 - Safety standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... health standards. 50-204.2 Section 50-204.2 Public Contracts and Property Management Other Provisions Relating to Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health...

75 FR 17641 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... for VA approval of such facilities, including standards for fire safety and heating and cooling... submitted in response to ``RIN 2900-AN57--Updating Fire Safety Standards.'' Copies of comments received will...

24 CFR 51.203 - Safety standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

76 FR 8699 - Locomotive Safety Standards; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

.... FRA-2009-0094 and FRA-2009-0095, Notice No. 2] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards notice of proposed... locomotive safety standards. See 76 FR 2200. The NPRM established a public docket to receive comments in...

77 FR 23159 - Locomotive Safety Standards; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-18

.... FRA-2009-0094 and FR-2009-0095, Notice No. 4] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards final rule is FRA... rule related to locomotive safety standards. See 77 FR 21312. The final rule established a public...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Notification of safety standards. 80.25 Section 80.25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.25 Notification of safety standards. (a) Each owner, operator, agent...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2010 CFR

2010-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2011 CFR

2011-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2012 CFR

2012-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2014 CFR

2014-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2013 CFR

2013-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

78 FR 9623 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... [Docket No. NHTSA-2013-0011] RIN 2127-AL11 Federal Motor Vehicle Safety Standards; Air Brake Systems... rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... published a final rule in the Federal Register amending Federal Motor Vehicle Safety Standard (FMVSS) No...

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false National Standard 10-Safety of Life at Sea... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

Current and anticipated uses of the CATHARE code at EDF and FRAMATOME

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gandrille, J.L.; Vacher, J.L.; Poizat, F.

1997-07-01

This paper presents current industrial applications of the CATHARE code in the fields of Safety Studies and Simulators where the code is intensively used by FRAMATOME, EDF and CEA, the development partners of CATHARE. Future needs in these fields are also recapitulated.

7 CFR Exhibit E to Subpart A of... - Voluntary National Model Building Codes

Code of Federal Regulations, 2011 CFR

2011-01-01

... National Model Building Codes The following documents address the health and safety aspects of buildings... International, Inc., 4051 West Flossmoor Road, Country Club Hills, Illinois 60477. 2 Southern Building Code Congress International, Inc., 900 Montclair Road, Birmingham, Alabama 35213-1206. 3 International...

Innovative Digital Tools and Surveillance Systems for the Timely Detection of Adverse Events at the Point of Care: A Proof-of-Concept Study.

PubMed

Hoppe, Christian; Obermeier, Patrick; Muehlhans, Susann; Alchikh, Maren; Seeber, Lea; Tief, Franziska; Karsch, Katharina; Chen, Xi; Boettcher, Sindy; Diedrich, Sabine; Conrad, Tim; Kisler, Bron; Rath, Barbara

2016-10-01

Regulatory authorities often receive poorly structured safety reports requiring considerable effort to investigate potential adverse events post hoc. Automated question-and-answer systems may help to improve the overall quality of safety information transmitted to pharmacovigilance agencies. This paper explores the use of the VACC-Tool (ViVI Automated Case Classification Tool) 2.0, a mobile application enabling physicians to classify clinical cases according to 14 pre-defined case definitions for neuroinflammatory adverse events (NIAE) and in full compliance with data standards issued by the Clinical Data Interchange Standards Consortium. The validation of the VACC-Tool 2.0 (beta-version) was conducted in the context of a unique quality management program for children with suspected NIAE in collaboration with the Robert Koch Institute in Berlin, Germany. The VACC-Tool was used for instant case classification and for longitudinal follow-up throughout the course of hospitalization. Results were compared to International Classification of Diseases , Tenth Revision (ICD-10) codes assigned in the emergency department (ED). From 07/2013 to 10/2014, a total of 34,368 patients were seen in the ED, and 5243 patients were hospitalized; 243 of these were admitted for suspected NIAE (mean age: 8.5 years), thus participating in the quality management program. Using the VACC-Tool in the ED, 209 cases were classified successfully, 69 % of which had been missed or miscoded in the ED reports. Longitudinal follow-up with the VACC-Tool identified additional NIAE. Mobile applications are taking data standards to the point of care, enabling clinicians to ascertain potential adverse events in the ED setting and during inpatient follow-up. Compliance with Clinical Data Interchange Standards Consortium (CDISC) data standards facilitates data interoperability according to regulatory requirements.

42 CFR 403.744 - Condition of participation: Life safety from fire.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 2 2014-10-01 2014-10-01 false Condition of participation: Life safety from fire... safety from fire. (a) General. An RNHCI must meet the following conditions: (1) Except as otherwise... Safety Code of the National Fire Protection Association. The Director of the Office of the Federal...

Implementation of non-condensable gases condensation suppression model into the WCOBRA/TRAC-TF2 LOCA safety evaluation code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liao, J.; Cao, L.; Ohkawa, K.

2012-07-01

The non-condensable gases condensation suppression model is important for a realistic LOCA safety analysis code. A condensation suppression model for direct contact condensation was previously developed by Westinghouse using first principles. The model is believed to be an accurate description of the direct contact condensation process in the presence of non-condensable gases. The Westinghouse condensation suppression model is further revised by applying a more physical model. The revised condensation suppression model is thus implemented into the WCOBRA/TRAC-TF2 LOCA safety evaluation code for both 3-D module (COBRA-TF) and 1-D module (TRAC-PF1). Parametric study using the revised Westinghouse condensation suppression model ismore » conducted. Additionally, the performance of non-condensable gases condensation suppression model is examined in the ACHILLES (ISP-25) separate effects test and LOFT L2-5 (ISP-13) integral effects test. (authors)« less

SFCOMPO-2.0: An OECD NEA database of spent nuclear fuel isotopic assays, reactor design specifications, and operating data

DOE PAGES

Michel-Sendis, F.; Gauld, I.; Martinez, J. S.; ...

2017-08-02

SFCOMPO-2.0 is the new release of the Organisation for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) database of experimental assay measurements. These measurements are isotopic concentrations from destructive radiochemical analyses of spent nuclear fuel (SNF) samples. We supplement the measurements with design information for the fuel assembly and fuel rod from which each sample was taken, as well as with relevant information on operating conditions and characteristics of the host reactors. These data are necessary for modeling and simulation of the isotopic evolution of the fuel during irradiation. SFCOMPO-2.0 has been developed and is maintained by the OECDmore » NEA under the guidance of the Expert Group on Assay Data of Spent Nuclear Fuel (EGADSNF), which is part of the NEA Working Party on Nuclear Criticality Safety (WPNCS). Significant efforts aimed at establishing a thorough, reliable, publicly available resource for code validation and safety applications have led to the capture and standardization of experimental data from 750 SNF samples from more than 40 reactors. These efforts have resulted in the creation of the SFCOMPO-2.0 database, which is publicly available from the NEA Data Bank. Our paper describes the new database, and applications of SFCOMPO-2.0 for computer code validation, integral nuclear data benchmarking, and uncertainty analysis in nuclear waste package analysis are briefly illustrated.« less

SFCOMPO-2.0: An OECD NEA database of spent nuclear fuel isotopic assays, reactor design specifications, and operating data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michel-Sendis, F.; Gauld, I.; Martinez, J. S.

SFCOMPO-2.0 is the new release of the Organisation for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) database of experimental assay measurements. These measurements are isotopic concentrations from destructive radiochemical analyses of spent nuclear fuel (SNF) samples. We supplement the measurements with design information for the fuel assembly and fuel rod from which each sample was taken, as well as with relevant information on operating conditions and characteristics of the host reactors. These data are necessary for modeling and simulation of the isotopic evolution of the fuel during irradiation. SFCOMPO-2.0 has been developed and is maintained by the OECDmore » NEA under the guidance of the Expert Group on Assay Data of Spent Nuclear Fuel (EGADSNF), which is part of the NEA Working Party on Nuclear Criticality Safety (WPNCS). Significant efforts aimed at establishing a thorough, reliable, publicly available resource for code validation and safety applications have led to the capture and standardization of experimental data from 750 SNF samples from more than 40 reactors. These efforts have resulted in the creation of the SFCOMPO-2.0 database, which is publicly available from the NEA Data Bank. Our paper describes the new database, and applications of SFCOMPO-2.0 for computer code validation, integral nuclear data benchmarking, and uncertainty analysis in nuclear waste package analysis are briefly illustrated.« less

KENO-VI Primer: A Primer for Criticality Calculations with SCALE/KENO-VI Using GeeWiz

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowman, Stephen M

2008-09-01

The SCALE (Standardized Computer Analyses for Licensing Evaluation) computer software system developed at Oak Ridge National Laboratory is widely used and accepted around the world for criticality safety analyses. The well-known KENO-VI three-dimensional Monte Carlo criticality computer code is one of the primary criticality safety analysis tools in SCALE. The KENO-VI primer is designed to help a new user understand and use the SCALE/KENO-VI Monte Carlo code for nuclear criticality safety analyses. It assumes that the user has a college education in a technical field. There is no assumption of familiarity with Monte Carlo codes in general or with SCALE/KENO-VImore » in particular. The primer is designed to teach by example, with each example illustrating two or three features of SCALE/KENO-VI that are useful in criticality analyses. The primer is based on SCALE 6, which includes the Graphically Enhanced Editing Wizard (GeeWiz) Windows user interface. Each example uses GeeWiz to provide the framework for preparing input data and viewing output results. Starting with a Quickstart section, the primer gives an overview of the basic requirements for SCALE/KENO-VI input and allows the user to quickly run a simple criticality problem with SCALE/KENO-VI. The sections that follow Quickstart include a list of basic objectives at the beginning that identifies the goal of the section and the individual SCALE/KENO-VI features that are covered in detail in the sample problems in that section. Upon completion of the primer, a new user should be comfortable using GeeWiz to set up criticality problems in SCALE/KENO-VI. The primer provides a starting point for the criticality safety analyst who uses SCALE/KENO-VI. Complete descriptions are provided in the SCALE/KENO-VI manual. Although the primer is self-contained, it is intended as a companion volume to the SCALE/KENO-VI documentation. (The SCALE manual is provided on the SCALE installation DVD.) The primer provides specific examples of using SCALE/KENO-VI for criticality analyses; the SCALE/KENO-VI manual provides information on the use of SCALE/KENO-VI and all its modules. The primer also contains an appendix with sample input files.« less

Status and Outlook of Metric Conversion of Standards: The Views of Nine Selected Major Standards Development Bodies.

DTIC Science & Technology

1982-05-01

insufficient need for a hard metric version of the ASME Boiler and Pressure Vessel Code and industry would not support the metric version. The Code Is not...aircraft industry is concerned with certification requirements in metric units. The inch-pound Boiler and Pressure Vessel Code is the current standard

FY2017 Updates to the SAS4A/SASSYS-1 Safety Analysis Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fanning, T. H.

The SAS4A/SASSYS-1 safety analysis software is used to perform deterministic analysis of anticipated events as well as design-basis and beyond-design-basis accidents for advanced fast reactors. It plays a central role in the analysis of U.S. DOE conceptual designs, proposed test and demonstration reactors, and in domestic and international collaborations. This report summarizes the code development activities that have taken place during FY2017. Extensions to the void and cladding reactivity feedback models have been implemented, and Control System capabilities have been improved through a new virtual data acquisition system for plant state variables and an additional Block Signal for a variablemore » lag compensator to represent reactivity feedback for novel shutdown devices. Current code development and maintenance needs are also summarized in three key areas: software quality assurance, modeling improvements, and maintenance of related tools. With ongoing support, SAS4A/SASSYS-1 can continue to fulfill its growing role in fast reactor safety analysis and help solidify DOE’s leadership role in fast reactor safety both domestically and in international collaborations.« less

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2011 CFR

2011-04-01

... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2014 CFR

2014-04-01

... The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2013 CFR

2013-04-01

... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2012 CFR

2012-04-01

... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

25 CFR 256.10 - When do I qualify for Category C assistance?

Code of Federal Regulations, 2010 CFR

2010-04-01

... living The dwelling cannot be brought up to applicable building code standards and to standard housing... applicable building code standards and to standard housing condition for $35,000 or less. You do not own a...

NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for

Science.gov Websites

Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities December 1, 2017 The U.S vehicle maintenance facilities with a new handbook and webinar that outline safety factors and standards

Prevalence and determinants of non-standard motorcycle safety helmets amongst food delivery workers in Selangor and Kuala Lumpur.

PubMed

Kulanthayan, S; See, Lai Git; Kaviyarasu, Y; Nor Afiah, M Z

2012-05-01

Almost half of the global traffic crashes involve vulnerable groups such as pedestrian, cyclists and two-wheeler users. The main objective of this study was to determine the factors that influence standard of the safety helmets used amongst food delivery workers by presence of Standard and Industrial Research Institute of Malaysia (SIRIM) certification label. A cross sectional study was conducted amongst 150 food delivery workers from fast food outlets in the vicinity of Selangor and Kuala Lumpur. During observation, safety helmets were classified as standard safety helmet in the presence of SIRIM label and non-standard in the absence of the label. They were approached for questionnaire participation once consent was obtained and were requested to exchange their safety helmet voluntarily with a new one after the interview. Data analysis was carried out using SPSS. Chi square and logistic regression analysis was applied to determine the significance and odds ratio of the variables studied, respectively (penetration test, age, education level, knowledge, crash history, types of safety helmet, marital status and years of riding experience) against the presence of SIRIM label. The response rate for this study was 85.2%. The prevalence of non-standard helmets use amongst fast food delivery workers was 55.3%. Safety helmets that failed the penetration test had higher odds of being non-standard helmets compared with safety helmets passing the test. Types of safety helmet indicated half-shell safety helmets had higher odds to be non-standard safety helmets compared to full-shell safety helmets. Riders with more years of riding experience were in high odds of wearing non-standard safety helmets compared to riders with less riding experience. Non-standard (non-SIRIM approved) helmets were more likely to be half-shell helmets, were more likely to fail the standards penetration test, and were more likely to be worn by older, more experienced riders. The implications of these findings are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Software Certification - Coding, Code, and Coders

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Holzmann, Gerard J.

2011-01-01

We describe a certification approach for software development that has been adopted at our organization. JPL develops robotic spacecraft for the exploration of the solar system. The flight software that controls these spacecraft is considered to be mission critical. We argue that the goal of a software certification process cannot be the development of "perfect" software, i.e., software that can be formally proven to be correct under all imaginable and unimaginable circumstances. More realistically, the goal is to guarantee a software development process that is conducted by knowledgeable engineers, who follow generally accepted procedures to control known risks, while meeting agreed upon standards of workmanship. We target three specific issues that must be addressed in such a certification procedure: the coding process, the code that is developed, and the skills of the coders. The coding process is driven by standards (e.g., a coding standard) and tools. The code is mechanically checked against the standard with the help of state-of-the-art static source code analyzers. The coders, finally, are certified in on-site training courses that include formal exams.

Interface requirements to couple thermal hydraulics codes to severe accident codes: ICARE/CATHARE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camous, F.; Jacq, F.; Chatelard, P.

1997-07-01

In order to describe with the same code the whole sequence of severe LWR accidents, up to the vessel failure, the Institute of Protection and Nuclear Safety has performed a coupling of the severe accident code ICARE2 to the thermalhydraulics code CATHARE2. The resulting code, ICARE/CATHARE, is designed to be as pertinent as possible in all the phases of the accident. This paper is mainly devoted to the description of the ICARE2-CATHARE2 coupling.