A Procedure for Testing the Difference between Effect Sizes.

ERIC Educational Resources Information Center

Lambert, Richard G.; Flowers, Claudia

A special case of the homogeneity of effect size test, as applied to pairwise comparisons of standardized mean differences, was evaluated. Procedures for comparing pairs of pretest to posttest effect sizes, as well as pairs of treatment versus control group effect sizes, were examined. Monte Carlo simulation was used to generate Type I error rates…

Meta-analysis of free-response studies, 1992-2008: assessing the noise reduction model in parapsychology.

PubMed

Storm, Lance; Tressoldi, Patrizio E; Di Risio, Lorenzo

2010-07-01

We report the results of meta-analyses on 3 types of free-response study: (a) ganzfeld (a technique that enhances a communication anomaly referred to as "psi"); (b) nonganzfeld noise reduction using alleged psi-enhancing techniques such as dream psi, meditation, relaxation, or hypnosis; and (c) standard free response (nonganzfeld, no noise reduction). For the period 1997-2008, a homogeneous data set of 29 ganzfeld studies yielded a mean effect size of 0.142 (Stouffer Z = 5.48, p = 2.13 x 10(-8)). A homogeneous nonganzfeld noise reduction data set of 16 studies yielded a mean effect size of 0.110 (Stouffer Z = 3.35, p = 2.08 x 10(-4)), and a homogeneous data set of 14 standard free-response studies produced a weak negative mean effect size of -0.029 (Stouffer Z = -2.29, p = .989). The mean effect size value of the ganzfeld database was significantly higher than the mean effect size of the standard free-response database but was not higher than the effect size of the nonganzfeld noise reduction database [corrected].We also found that selected participants (believers in the paranormal, meditators, etc.) had a performance advantage over unselected participants, but only if they were in the ganzfeld condition.

Effect Sizes for Growth-Modeling Analysis for Controlled Clinical Trials in the Same Metric as for Classical Analysis

PubMed Central

Feingold, Alan

2009-01-01

The use of growth-modeling analysis (GMA)--including Hierarchical Linear Models, Latent Growth Models, and General Estimating Equations--to evaluate interventions in psychology, psychiatry, and prevention science has grown rapidly over the last decade. However, an effect size associated with the difference between the trajectories of the intervention and control groups that captures the treatment effect is rarely reported. This article first reviews two classes of formulas for effect sizes associated with classical repeated-measures designs that use the standard deviation of either change scores or raw scores for the denominator. It then broadens the scope to subsume GMA, and demonstrates that the independent groups, within-subjects, pretest-posttest control-group, and GMA designs all estimate the same effect size when the standard deviation of raw scores is uniformly used. Finally, it is shown that the correct effect size for treatment efficacy in GMA--the difference between the estimated means of the two groups at end of study (determined from the coefficient for the slope difference and length of study) divided by the baseline standard deviation--is not reported in clinical trials. PMID:19271847

Special Education Program Standards Study. Commonwealth of Virginia. Final Technical Report.

ERIC Educational Resources Information Center

Keith, Timothy Z.; And Others

This federally funded study investigated Virginia special education program standards, focusing on local applications of the standards for class size and class mix and the effect of varying class size and class mix on student outcomes. The study concentrated on students with educable mental retardation, severe emotional disturbance, and specific…

Music therapy as an adjunct to standard treatment for obsessive compulsive disorder and co-morbid anxiety and depression: A randomized clinical trial.

PubMed

Shiranibidabadi, Shahrzad; Mehryar, Amirhooshang

2015-09-15

Previous studies have highlighted the potential therapeutic benefits of music therapy as an adjunct to standard care, in a variety of psychiatric ailments including mood and anxiety disorders. However, the role of music in the treatment of obsessive-compulsive disorder (OCD) have not been investigated to date. In a single-center, parallel-group, randomized clinical trial (NCT02314195) 30 patients with OCD were randomly assigned to standard treatment (pharmacotherapy and cognitive-behavior therapy) plus 12 sessions of individual music therapy (n = 15) or standard treatment only (n = 15) for one month. Maudsley Obsessive-Compulsive Inventory, Beck Anxiety Inventory, and Beck Depression Inventory-Short Form were administered baseline and after one month. Thirty patients completed the study. Music therapy resulted in a greater decrease in total obsessive score (post-intervention score: music therapy+standard treatment: 12.4 ± 1.9 vs standard treatment only: 15.1 ± 1.7, p < 0.001, effect size = 56.7%). For subtypes, significant between-group differences were identified for checking (p = 0.004), and slowness (p = 0.019), but not for washing or responsibility. Music therapy was significantly more effective in reducing anxiety (post-intervention score: music therapy + standard treatment: 16.9 ± 7.4 vs standard treatment only: 22.9 ± 4.6, p < 0.001, effect size = 47.0%), and depressive symptoms (post-intervention score: music therapy + standard treatment: 10.8 ± 3.8 vs standard treatment: 17.1 ± 3.7, p < 0.001, effect size = 47.0%). Inclusion of a small sample size, lack of blinding due to the nature of the intervention, short duration of follow-up. In patients with OCD, music therapy, as an adjunct to standard care, seems to be effective in reducing obsessions, as well as co-morbid anxiety and depressive symptoms. Copyright © 2015. Published by Elsevier B.V.

Interdependent effects of male and female body size plasticity on mating behaviour of predatory mites.

PubMed

Walzer, Andreas; Schausberger, Peter

2015-02-01

The adaptive canalization hypothesis predicts that traits with low phenotypic plasticity are more fitness relevant, because they have been canalized via strong past selection, than traits with high phenotypic plasticity. Based on differing male body size plasticities of the predatory mites Phytoseiulus persimilis (low plasticity) and Neoseiulus californicus (high plasticity), we accordingly hypothesized that small male body size entails higher costs in female choice and male-male competition in P. persimilis than N. californicus . Males of both species are highly polygynous but females differ in the level of polyandry (low level in P. persimilis ; medium level in N. californicus ). We videotaped the mating interactions in triplets of either P. persimilis or N. californicus , consisting of a virgin female (small or standard-sized) and a small and a standard-sized male. Mating by both small and standard-sized P. persimilis females was biased towards standard-sized males, resulting from the interplay between female preference for standard-sized males and the inferiority of small males in male-male competition. In contrast, mating by N. californicus females was equally balanced between small and standard-sized males. Small N. californicus males were more aggressive ('Napoleon complex') in male-male competition, reducing the likelihood of encounter between the standard-sized male and the female, and thus counterbalancing female preference for standard-sized males. Our results support the hypothesis that male body size is more important to fitness in the low-level polyandrous P. persimilis than in the medium-level polyandrous N. californicus and provide a key example of the implications of sexually selected body size plasticity on mating behaviour.

Interdependent effects of male and female body size plasticity on mating behaviour of predatory mites

PubMed Central

Walzer, Andreas; Schausberger, Peter

2015-01-01

The adaptive canalization hypothesis predicts that traits with low phenotypic plasticity are more fitness relevant, because they have been canalized via strong past selection, than traits with high phenotypic plasticity. Based on differing male body size plasticities of the predatory mites Phytoseiulus persimilis (low plasticity) and Neoseiulus californicus (high plasticity), we accordingly hypothesized that small male body size entails higher costs in female choice and male–male competition in P. persimilis than N. californicus. Males of both species are highly polygynous but females differ in the level of polyandry (low level in P. persimilis; medium level in N. californicus). We videotaped the mating interactions in triplets of either P. persimilis or N. californicus, consisting of a virgin female (small or standard-sized) and a small and a standard-sized male. Mating by both small and standard-sized P. persimilis females was biased towards standard-sized males, resulting from the interplay between female preference for standard-sized males and the inferiority of small males in male–male competition. In contrast, mating by N. californicus females was equally balanced between small and standard-sized males. Small N. californicus males were more aggressive (‘Napoleon complex’) in male–male competition, reducing the likelihood of encounter between the standard-sized male and the female, and thus counterbalancing female preference for standard-sized males. Our results support the hypothesis that male body size is more important to fitness in the low-level polyandrous P. persimilis than in the medium-level polyandrous N. californicus and provide a key example of the implications of sexually selected body size plasticity on mating behaviour. PMID:25673881

Sample size requirements for separating out the effects of combination treatments: randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis.

PubMed

Wolbers, Marcel; Heemskerk, Dorothee; Chau, Tran Thi Hong; Yen, Nguyen Thi Bich; Caws, Maxine; Farrar, Jeremy; Day, Jeremy

2011-02-02

In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 x 2 factorial design. We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 x 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Current Controlled Trials ISRCTN61649292.

Choice of the Metric for Effect Size in Meta-analysis.

ERIC Educational Resources Information Center

McGaw, Barry; Glass, Gene V.

1980-01-01

There are difficulties in expressing effect sizes on a common metric when some studies use transformed scales to express group differences, or use factorial designs or covariance adjustments to obtain a reduced error term. A common metric on which effect sizes may be standardized is described. (Author/RL)

An imbalance in cluster sizes does not lead to notable loss of power in cross-sectional, stepped-wedge cluster randomised trials with a continuous outcome.

PubMed

Kristunas, Caroline A; Smith, Karen L; Gray, Laura J

2017-03-07

The current methodology for sample size calculations for stepped-wedge cluster randomised trials (SW-CRTs) is based on the assumption of equal cluster sizes. However, as is often the case in cluster randomised trials (CRTs), the clusters in SW-CRTs are likely to vary in size, which in other designs of CRT leads to a reduction in power. The effect of an imbalance in cluster size on the power of SW-CRTs has not previously been reported, nor what an appropriate adjustment to the sample size calculation should be to allow for any imbalance. We aimed to assess the impact of an imbalance in cluster size on the power of a cross-sectional SW-CRT and recommend a method for calculating the sample size of a SW-CRT when there is an imbalance in cluster size. The effect of varying degrees of imbalance in cluster size on the power of SW-CRTs was investigated using simulations. The sample size was calculated using both the standard method and two proposed adjusted design effects (DEs), based on those suggested for CRTs with unequal cluster sizes. The data were analysed using generalised estimating equations with an exchangeable correlation matrix and robust standard errors. An imbalance in cluster size was not found to have a notable effect on the power of SW-CRTs. The two proposed adjusted DEs resulted in trials that were generally considerably over-powered. We recommend that the standard method of sample size calculation for SW-CRTs be used, provided that the assumptions of the method hold. However, it would be beneficial to investigate, through simulation, what effect the maximum likely amount of inequality in cluster sizes would be on the power of the trial and whether any inflation of the sample size would be required.

An Exploratory Analysis of Projection-Standard Variables (Screen Size, Image Size and Image Contrast) in Terms of Their Effects on the Speed and Accuracy of Discrimination. Final Report.

ERIC Educational Resources Information Center

Metcalf, Richard M.

Although there has been previous research concerned with image size, brightness, and contrast in projection standards, the work has lacked careful conceptualization. In this study, size was measured in terms of the visual angle subtended by the material, brightness was stated in foot-lamberts, and contrast was defined as the ratio of the…

Effects of shape, size, and chromaticity of stimuli on estimated size in normally sighted, severely myopic, and visually impaired students.

PubMed

Huang, Kuo-Chen; Wang, Hsiu-Feng; Chen, Chun-Ching

2010-06-01

Effects of shape, size, and chromaticity of stimuli on participants' errors when estimating the size of simultaneously presented standard and comparison stimuli were examined. 48 Taiwanese college students ages 20 to 24 years old (M = 22.3, SD = 1.3) participated. Analysis showed that the error for estimated size was significantly greater for those in the low-vision group than for those in the normal-vision and severe-myopia groups. The errors were significantly greater with green and blue stimuli than with red stimuli. Circular stimuli produced smaller mean errors than did square stimuli. The actual size of the standard stimulus significantly affected the error for estimated size. Errors for estimations using smaller sizes were significantly higher than when the sizes were larger. Implications of the results for graphics-based interface design, particularly when taking account of visually impaired users, are discussed.

Correction to storm, Tressoldi, and di Risio (2010).

PubMed

2015-03-01

Reports an error in "Meta-analysis of free-response studies, 1992-2008: Assessing the noise reduction model in parapsychology" by Lance Storm, Patrizio E. Tressoldi and Lorenzo Di Risio (Psychological Bulletin, 2010[Jul], Vol 136[4], 471-485). In the article, the sentence giving the formula in the second paragraph on p. 479 was stated incorrectly. The corrected sentence is included. (The following abstract of the original article appeared in record 2010-12718-001.) [Correction Notice: An erratum for this article was reported in Vol 136(5) of Psychological Bulletin (see record 2010-17510-009). In the article, the second to last sentence of the abstract (p. 471) was stated incorrectly. The sentence should read as follows: "The mean effect size value of the ganzfeld database was significantly higher than the mean effect size of the standard free-response database but was not higher than the effect size of the nonganzfeld noise reduction database."] We report the results of meta-analyses on 3 types of free-response study: (a) ganzfeld (a technique that enhances a communication anomaly referred to as "psi"); (b) nonganzfeld noise reduction using alleged psi-enhancing techniques such as dream psi, meditation, relaxation, or hypnosis; and (c) standard free response (nonganzfeld, no noise reduction). For the period 1997-2008, a homogeneous data set of 29 ganzfeld studies yielded a mean effect size of 0.142 (Stouffer Z = 5.48, p = 2.13 × 10-8). A homogeneous nonganzfeld noise reduction data set of 16 studies yielded a mean effect size of 0.110 (Stouffer Z = 3.35, p = 2.08 × 10-4), and a homogeneous data set of 14 standard free-response studies produced a weak negative mean effect size of -0.029 (Stouffer Z = -2.29, p = .989). The mean effect size value of the ganzfeld database were significantly higher than the mean effect size of the nonganzfeld noise reduction and the standard free-response databases. We also found that selected participants (believers in the paranormal, meditators, etc.) had a performance advantage over unselected participants, but only if they were in the ganzfeld condition. PsycINFO Database Record (c) 2015 APA, all rights reserved.

Standardized mean differences cause funnel plot distortion in publication bias assessments.

PubMed

Zwetsloot, Peter-Paul; Van Der Naald, Mira; Sena, Emily S; Howells, David W; IntHout, Joanna; De Groot, Joris Ah; Chamuleau, Steven Aj; MacLeod, Malcolm R; Wever, Kimberley E

2017-09-08

Meta-analyses are increasingly used for synthesis of evidence from biomedical research, and often include an assessment of publication bias based on visual or analytical detection of asymmetry in funnel plots. We studied the influence of different normalisation approaches, sample size and intervention effects on funnel plot asymmetry, using empirical datasets and illustrative simulations. We found that funnel plots of the Standardized Mean Difference (SMD) plotted against the standard error (SE) are susceptible to distortion, leading to overestimation of the existence and extent of publication bias. Distortion was more severe when the primary studies had a small sample size and when an intervention effect was present. We show that using the Normalised Mean Difference measure as effect size (when possible), or plotting the SMD against a sample size-based precision estimate, are more reliable alternatives. We conclude that funnel plots using the SMD in combination with the SE are unsuitable for publication bias assessments and can lead to false-positive results.

Standardized mean differences cause funnel plot distortion in publication bias assessments

PubMed Central

Van Der Naald, Mira; Sena, Emily S; Howells, David W; IntHout, Joanna; De Groot, Joris AH; Chamuleau, Steven AJ; MacLeod, Malcolm R

2017-01-01

Meta-analyses are increasingly used for synthesis of evidence from biomedical research, and often include an assessment of publication bias based on visual or analytical detection of asymmetry in funnel plots. We studied the influence of different normalisation approaches, sample size and intervention effects on funnel plot asymmetry, using empirical datasets and illustrative simulations. We found that funnel plots of the Standardized Mean Difference (SMD) plotted against the standard error (SE) are susceptible to distortion, leading to overestimation of the existence and extent of publication bias. Distortion was more severe when the primary studies had a small sample size and when an intervention effect was present. We show that using the Normalised Mean Difference measure as effect size (when possible), or plotting the SMD against a sample size-based precision estimate, are more reliable alternatives. We conclude that funnel plots using the SMD in combination with the SE are unsuitable for publication bias assessments and can lead to false-positive results. PMID:28884685

A comparative appraisal of two equivalence tests for multiple standardized effects.

PubMed

Shieh, Gwowen

2016-04-01

Equivalence testing is recommended as a better alternative to the traditional difference-based methods for demonstrating the comparability of two or more treatment effects. Although equivalent tests of two groups are widely discussed, the natural extensions for assessing equivalence between several groups have not been well examined. This article provides a detailed and schematic comparison of the ANOVA F and the studentized range tests for evaluating the comparability of several standardized effects. Power and sample size appraisals of the two grossly distinct approaches are conducted in terms of a constraint on the range of the standardized means when the standard deviation of the standardized means is fixed. Although neither method is uniformly more powerful, the studentized range test has a clear advantage in sample size requirements necessary to achieve a given power when the underlying effect configurations are close to the priori minimum difference for determining equivalence. For actual application of equivalence tests and advance planning of equivalence studies, both SAS and R computer codes are available as supplementary files to implement the calculations of critical values, p-values, power levels, and sample sizes. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Effect size calculation in meta-analyses of psychotherapy outcome research.

PubMed

Hoyt, William T; Del Re, A C

2018-05-01

Meta-analysis of psychotherapy intervention research normally examines differences between treatment groups and some form of comparison group (e.g., wait list control; alternative treatment group). The effect of treatment is normally quantified as a standardized mean difference (SMD). We describe procedures for computing unbiased estimates of the population SMD from sample data (e.g., group Ms and SDs), and provide guidance about a number of complications that may arise related to effect size computation. These complications include (a) incomplete data in research reports; (b) use of baseline data in computing SMDs and estimating the population standard deviation (σ); (c) combining effect size data from studies using different research designs; and (d) appropriate techniques for analysis of data from studies providing multiple estimates of the effect of interest (i.e., dependent effect sizes). Clinical or Methodological Significance of this article: Meta-analysis is a set of techniques for producing valid summaries of existing research. The initial computational step for meta-analyses of research on intervention outcomes involves computing an effect size quantifying the change attributable to the intervention. We discuss common issues in the computation of effect sizes and provide recommended procedures to address them.

Low level of polyandry constrains phenotypic plasticity of male body size in mites.

PubMed

Schausberger, Peter; Walzer, Andreas; Murata, Yasumasa; Osakabe, Masahiro

2017-01-01

Polyandry, i.e. females mating with multiple males, is more common than previously anticipated and potentially provides both direct and indirect fitness benefits to females. The level of polyandry (defined by the lifetime number of male mates of a female) is an important determinant of the occurrence and intensity of sexual selection acting on male phenotypes. While the forces of sexual selection acting on phenotypic male traits such as body size are relatively well understood, sexual selection acting on phenotypic plasticity of these traits is unexplored. We tackled this issue by scrutinizing the link between polyandry and phenotypic plasticity of male body size in two sympatric plant-inhabiting predatory mite species, Phytoseiulus persimilis and Neoseiulus californicus. These two species are similar in life history, ecological niche requirements, mating behavior, polygyny and female body size plasticity but strikingly differ in the level of both polyandry and phenotypic plasticity of male body size (both lower in P. persimilis). We hypothesized that deviations from standard body size, i.e. the size achieved under favorable conditions, incur higher costs for males in the less polyandrous P. persimilis. To test our hypotheses, we conducted two experiments on (i) the effects of male body size on spermatophore transfer in singly mating females and (ii) the effects of mate sequence (switching the order of standard-sized and small males) on mating behavior and paternity success in doubly mating females. In P. persimilis but not N. californicus, small males transferred fewer but larger spermatophores to the females; in both species, females re-mated more likely with standard-sized following small than small following standard-sized males; in P. persimilis, first standard-sized males sired a higher proportion of offspring produced after re-mating by the female than first small males, whereas in N. californicus the paternity success of small and standard-sized males was independent of the mating sequence. Based on our results and pertinent previous studies, which showed that females of P. persimilis, but not N. californicus, prefer mating with standard-sized over small males and allow them fertilizing more eggs, the lack of interspecific difference in female body size plasticity, and the absence of any clue pointing at a role of natural selection, we suggest that the interspecific difference in male body size plasticity is sexually selected. Our study provides an indication of sexual selection constraining plasticity of male phenotypes, suggesting that the level of polyandry may be an important co-determinant of the level of phenotypic plasticity of male body size.

Low level of polyandry constrains phenotypic plasticity of male body size in mites

PubMed Central

Walzer, Andreas; Murata, Yasumasa; Osakabe, Masahiro

2017-01-01

Polyandry, i.e. females mating with multiple males, is more common than previously anticipated and potentially provides both direct and indirect fitness benefits to females. The level of polyandry (defined by the lifetime number of male mates of a female) is an important determinant of the occurrence and intensity of sexual selection acting on male phenotypes. While the forces of sexual selection acting on phenotypic male traits such as body size are relatively well understood, sexual selection acting on phenotypic plasticity of these traits is unexplored. We tackled this issue by scrutinizing the link between polyandry and phenotypic plasticity of male body size in two sympatric plant-inhabiting predatory mite species, Phytoseiulus persimilis and Neoseiulus californicus. These two species are similar in life history, ecological niche requirements, mating behavior, polygyny and female body size plasticity but strikingly differ in the level of both polyandry and phenotypic plasticity of male body size (both lower in P. persimilis). We hypothesized that deviations from standard body size, i.e. the size achieved under favorable conditions, incur higher costs for males in the less polyandrous P. persimilis. To test our hypotheses, we conducted two experiments on (i) the effects of male body size on spermatophore transfer in singly mating females and (ii) the effects of mate sequence (switching the order of standard-sized and small males) on mating behavior and paternity success in doubly mating females. In P. persimilis but not N. californicus, small males transferred fewer but larger spermatophores to the females; in both species, females re-mated more likely with standard-sized following small than small following standard-sized males; in P. persimilis, first standard-sized males sired a higher proportion of offspring produced after re-mating by the female than first small males, whereas in N. californicus the paternity success of small and standard-sized males was independent of the mating sequence. Based on our results and pertinent previous studies, which showed that females of P. persimilis, but not N. californicus, prefer mating with standard-sized over small males and allow them fertilizing more eggs, the lack of interspecific difference in female body size plasticity, and the absence of any clue pointing at a role of natural selection, we suggest that the interspecific difference in male body size plasticity is sexually selected. Our study provides an indication of sexual selection constraining plasticity of male phenotypes, suggesting that the level of polyandry may be an important co-determinant of the level of phenotypic plasticity of male body size. PMID:29190832

Canalization of body size matters for lifetime reproductive success of male predatory mites (Acari: Phytoseiidae)

PubMed Central

Walzer, Andreas; Schausberger, Peter

2014-01-01

The adaptive canalization hypothesis predicts that highly fitness-relevant traits are canalized via past selection, resulting in low phenotypic plasticity and high robustness to environmental stress. Accordingly, we hypothesized that the level of phenotypic plasticity of male body size of the predatory mites Phytoseiulus persimilis (low plasticity) and Neoseiulus californicus (high plasticity) reflects the effects of body size variation on fitness, especially male lifetime reproductive success (LRS). We first generated small and standard-sized males of P. persimilis and N. californicus by rearing them to adulthood under limited and ample prey supply, respectively. Then, adult small and standard-sized males were provided with surplus virgin females throughout life to assess their mating and reproductive traits. Small male body size did not affect male longevity or the number of fertilized females but reduced male LRS of P. persimilis but not N. californicus. Proximately, the lower LRS of small than standard-sized P. persimilis males correlated with shorter mating durations, probably decreasing the amount of transferred sperm. Ultimately, we suggest that male body size is more strongly canalized in P. persimilis than N. californicus because deviation from standard body size has larger detrimental fitness effects in P. persimilis than N. californicus. © 2014 The Authors. Biological Journal of the Linnean Society published by John Wiley & Sons Ltd on behalf of The Linnean Society of London, Biological Journal of the Linnean Society, 2014, 111, 889–899. PMID:25132689

Do Between-Culture Differences Really Mean that People Are Different? A Look at Some Measures of Culture Effect Size.

ERIC Educational Resources Information Center

Matsumoto, David; Grissom, Robert J.; Dinnel, Dale L.

2001-01-01

Recommends four measures of cultural effect size appropriate for cross-cultural research (standardized difference between two sample means, probabilistic superiority effect size measure, Cohen's U1, and point biserial correlation), demonstrating their efficacy on two data sets from previously published studies and arguing for their use in future…

Standardized Regression Coefficients as Indices of Effect Sizes in Meta-Analysis

ERIC Educational Resources Information Center

Kim, Rae Seon

2011-01-01

When conducting a meta-analysis, it is common to find many collected studies that report regression analyses, because multiple regression analysis is widely used in many fields. Meta-analysis uses effect sizes drawn from individual studies as a means of synthesizing a collection of results. However, indices of effect size from regression analyses…

Sample size requirements for separating out the effects of combination treatments: Randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis

PubMed Central

2011-01-01

Background In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 × 2 factorial design. Methods We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. Results In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Conclusions Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 × 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Trial registration Current Controlled Trials ISRCTN61649292 PMID:21288326

Does wine glass size influence sales for on-site consumption? A multiple treatment reversal design.

PubMed

Pechey, Rachel; Couturier, Dominique-Laurent; Hollands, Gareth J; Mantzari, Eleni; Munafò, Marcus R; Marteau, Theresa M

2016-06-07

Wine glass size can influence both perceptions of portion size and the amount poured, but its impact upon purchasing and consumption is unknown. This study aimed to examine the impact of wine glass size on wine sales for on-site consumption, keeping portion size constant. In one establishment (with separate bar and restaurant areas) in Cambridge, England, wine glass size (Standard; Larger; Smaller) was changed over eight fortnightly periods. The bar and restaurant differ in wine sales by the glass vs. by the bottle (93 % vs. 63 % by the glass respectively). Daily wine volume purchased was 9.4 % (95 % CI: 1.9, 17.5) higher when sold in larger compared to standard-sized glasses. This effect seemed principally driven by sales in the bar area (bar: 14.4 % [3.3, 26.7]; restaurant: 8.2 % [-2.5, 20.1]). Findings were inconclusive as to whether sales were different with smaller vs. standard-sized glasses. The size of glasses in which wine is sold, keeping the portion size constant, can affect consumption, with larger glasses increasing consumption. The hypothesised mechanisms for these differential effects need to be tested in a replication study. If replicated, policy implications could include considering glass size amongst alcohol licensing requirements. ISRCTN registry: ISRCTN12018175 . Registered 12(th) May 2015.

The Effect of Kindergarten Classroom Size Reduction on Second Grade Student Achievement: Evidence from California

ERIC Educational Resources Information Center

Funkhouser, Edward

2009-01-01

Because classroom size reduction (CSR) and standards based testing were implemented at the same time in California during the mid-1990s, it is difficult to isolate the effects of classroom size on outcomes from the effects of curriculum changes. As a result, the main comparison in this paper is very specific--the effect of reduced sized…

Randomized Controlled Trial of the ShangRing for Adult Medical Male Circumcision: Safety, Effectiveness, and Acceptability of Using 7 Versus 14 Device Sizes.

PubMed

Feldblum, Paul J; Zulu, Robert; Linyama, David; Long, Sarah; Nonde, Thikazi Jere; Lai, Jaim Jou; Kashitala, Joshua; Veena, Valentine; Kasonde, Prisca

2016-06-01

To assess the safety, effectiveness, and acceptability of providing a reduced number of ShangRing sizes for adult voluntary medical male circumcision (VMMC) within routine service delivery in Lusaka, Zambia. We conducted a randomized controlled trial and enrolled 500 HIV-negative men aged 18-49 years at 3 clinics. Participants were randomized to 1 of 2 study arms (Standard Sizing arm vs Modified Sizing arm) in a 1:1 ratio. All 14 adult ShangRing sizes (40-26 mm inner diameter, each varying by 1 mm) were available in the Standard Sizing arm; the Modified Sizing arm used every other size (40, 38, 36, 34, 32, 30, 28 mm inner diameter). Each participant was scheduled for 2 follow-up visits: the removal visit (day 7 after placement) and the healing check visit (day 42 after placement), when they were evaluated for adverse events (AEs), pain, and healing. Four hundred and ninety-six men comprised the analysis population, with 255 in the Standard Sizing arm and 241 in the Modified Sizing arm. Three men experienced a moderate or severe AEs (0.6%), including 2 in the Standard Sizing arm (0.8%) and 1 in the Modified Sizing arm (0.4%). 73.2% of participants were completely healed at the scheduled day 42 healing check visit, with similar percentages across study arms. Virtually all (99.6%) men, regardless of study arm, stated that they were very satisfied or satisfied with the appearance of their circumcised penis, and 98.6% stated that they would recommend ShangRing circumcision to family/friends. The moderate/severe AE rate was low and similar in the 2 study arms, suggesting that provision of one-half the number of adult device sizes is sufficient for safe service delivery. Effectiveness, time to healing, and acceptability were similar in the study arms. The simplicity of the ShangRing technique, and its relative speed, could facilitate VMMC program goals. In addition, sufficiency of fewer device sizes would simplify logistics and inventory.

A meta-analysis of instructional systems applied in science teaching

NASA Astrophysics Data System (ADS)

Willett, John B.; Yamashita, June J. M.; Anderson, Ronald D.

This article is a report of a meta-analysis on the question: What are the effects of different instructional systems used in science teaching? The studies utilized in this meta-analysis were identified by a process that included a systematic screening of all dissertations completed in the field of science education since 1950, an ERIC search of the literature, a systematic screening of selected research journals, and the standard procedure of identifying potentially relevant studies through examination of the bibliographies of the studies reviewed. In all, the 130 studies coded gave rise to 341 effect sizes. The mean effect size produced over all systems was 0.10 with a standard deviation of 0.41, indicating that, on the average, an innovative teaching system in this sample produced one-tenth of a standard deviation better performance than traditional science teaching. Particular kinds of teaching systems, however, produced results that varied from this overall result. Mean effect sizes were also computed by year of publication, form of publication, grade level, and subject matter.

Size effects on acid bisulfite pretreatment efficiency: multiple product yields in spent liquor and enzymatic digestibility of pretreated solids

Treesearch

Yalan Liu; Jinwu Wang; Michael P. Wolcott

2017-01-01

Currently, feedstock size effects on chemical pretreatment performance were not clear due to the complexity of the pretreatment process and multiple evaluation standards such as the sugar recovery in spent liquor or enzymatic digestibility. In this study, we evaluated the size effects by various ways: the sugar recovery and coproduct yields in spent liquor, the...

Size and modality effects in Braille learning: Implications for the blind child from pre-reading sighted children.

PubMed

Barlow-Brown, Fiona; Barker, Christopher; Harris, Margaret

2018-06-17

Beginning readers are typically introduced to enlarged print, and the size of this print decreases as readers become more fluent. In comparison, beginning blind readers are expected to learn standard-sized Braille from the outset because past research suggests letter knowledge cannot be transferred across different sizes of Braille. The study aims to investigate whether learning Braille using an oversized pegboard leads to faster, transferable, letter learning and whether performance is mediated by either tactile or visual learning. Sixty-eight children participated in the study. All children were sighted pre-readers with no previous knowledge of Braille. The children came from two nursery schools with an average age of 47.8 months. Children were taught specific Braille letters using either an enlarged pegboard or standard Braille. Two other groups of children were taught using visually presented Braille characters in either an enlarged or standard size and a further control group mirrored the experience of blind children in receiving non-specific tactile training prior to being introduced to Braille. In all tactile conditions it was ensured that the children did not visually experience any Braille for the duration of the study. Results demonstrated that initially training children with large Braille tactually led to the best subsequent learning of standard Braille. Despite the fact that both initial visual and large tactual learning were significantly faster than learning standard Braille, when transferring letter knowledge to standard tactile Braille, previous tactile experience with the large pegboard offered the most efficient route. Braille letter knowledge can be transferred across size and modality particularly effectively with large tactile Braille. This has significant implications for the education of blind children. © 2018 The British Psychological Society.

Four Methods of Identifying Change in the Context of a Multiple Component Reading Intervention for Struggling Middle School Readers

ERIC Educational Resources Information Center

Frijters, Jan C.; Lovett, Maureen W.; Sevcik, Rose A.; Morris, Robin D.

2013-01-01

The results from controlled intervention research have indicated that effective reading interventions exist for children with reading difficulties. Effect sizes for older struggling readers, however, typically have not matched the large effects demonstrated with younger children. Standardized effect sizes for intervention/control comparisons…

Measuring Effect Sizes: The Effect of Measurement Error. Working Paper 19

ERIC Educational Resources Information Center

Boyd, Donald; Grossman, Pamela; Lankford, Hamilton; Loeb, Susanna; Wyckoff, James

2008-01-01

Value-added models in education research allow researchers to explore how a wide variety of policies and measured school inputs affect the academic performance of students. Researchers typically quantify the impacts of such interventions in terms of "effect sizes", i.e., the estimated effect of a one standard deviation change in the…

Critical appraisal of arguments for the delayed-start design proposed as alternative to the parallel-group randomized clinical trial design in the field of rare disease.

PubMed

Spineli, Loukia M; Jenz, Eva; Großhennig, Anika; Koch, Armin

2017-08-17

A number of papers have proposed or evaluated the delayed-start design as an alternative to the standard two-arm parallel group randomized clinical trial (RCT) design in the field of rare disease. However the discussion is felt to lack a sufficient degree of consideration devoted to the true virtues of the delayed start design and the implications either in terms of required sample-size, overall information, or interpretation of the estimate in the context of small populations. To evaluate whether there are real advantages of the delayed-start design particularly in terms of overall efficacy and sample size requirements as a proposed alternative to the standard parallel group RCT in the field of rare disease. We used a real-life example to compare the delayed-start design with the standard RCT in terms of sample size requirements. Then, based on three scenarios regarding the development of the treatment effect over time, the advantages, limitations and potential costs of the delayed-start design are discussed. We clarify that delayed-start design is not suitable for drugs that establish an immediate treatment effect, but for drugs with effects developing over time, instead. In addition, the sample size will always increase as an implication for a reduced time on placebo resulting in a decreased treatment effect. A number of papers have repeated well-known arguments to justify the delayed-start design as appropriate alternative to the standard parallel group RCT in the field of rare disease and do not discuss the specific needs of research methodology in this field. The main point is that a limited time on placebo will result in an underestimated treatment effect and, in consequence, in larger sample size requirements compared to those expected under a standard parallel-group design. This also impacts on benefit-risk assessment.

Interventions to Improve Medication Adherence in Hypertensive Patients: Systematic Review and Meta-analysis.

PubMed

Conn, Vicki S; Ruppar, Todd M; Chase, Jo-Ana D; Enriquez, Maithe; Cooper, Pamela S

2015-12-01

This systematic review applied meta-analytic procedures to synthesize medication adherence interventions that focus on adults with hypertension. Comprehensive searching located trials with medication adherence behavior outcomes. Study sample, design, intervention characteristics, and outcomes were coded. Random-effects models were used in calculating standardized mean difference effect sizes. Moderator analyses were conducted using meta-analytic analogues of ANOVA and regression to explore associations between effect sizes and sample, design, and intervention characteristics. Effect sizes were calculated for 112 eligible treatment-vs.-control group outcome comparisons of 34,272 subjects. The overall standardized mean difference effect size between treatment and control subjects was 0.300. Exploratory moderator analyses revealed interventions were most effective among female, older, and moderate- or high-income participants. The most promising intervention components were those linking adherence behavior with habits, giving adherence feedback to patients, self-monitoring of blood pressure, using pill boxes and other special packaging, and motivational interviewing. The most effective interventions employed multiple components and were delivered over many days. Future research should strive for minimizing risks of bias common in this literature, especially avoiding self-report adherence measures.

Confidence intervals and sample size calculations for the standardized mean difference effect size between two normal populations under heteroscedasticity.

PubMed

Shieh, G

2013-12-01

The use of effect sizes and associated confidence intervals in all empirical research has been strongly emphasized by journal publication guidelines. To help advance theory and practice in the social sciences, this article describes an improved procedure for constructing confidence intervals of the standardized mean difference effect size between two independent normal populations with unknown and possibly unequal variances. The presented approach has advantages over the existing formula in both theoretical justification and computational simplicity. In addition, simulation results show that the suggested one- and two-sided confidence intervals are more accurate in achieving the nominal coverage probability. The proposed estimation method provides a feasible alternative to the most commonly used measure of Cohen's d and the corresponding interval procedure when the assumption of homogeneous variances is not tenable. To further improve the potential applicability of the suggested methodology, the sample size procedures for precise interval estimation of the standardized mean difference are also delineated. The desired precision of a confidence interval is assessed with respect to the control of expected width and to the assurance probability of interval width within a designated value. Supplementary computer programs are developed to aid in the usefulness and implementation of the introduced techniques.

Designing image segmentation studies: Statistical power, sample size and reference standard quality.

PubMed

Gibson, Eli; Hu, Yipeng; Huisman, Henkjan J; Barratt, Dean C

2017-12-01

Segmentation algorithms are typically evaluated by comparison to an accepted reference standard. The cost of generating accurate reference standards for medical image segmentation can be substantial. Since the study cost and the likelihood of detecting a clinically meaningful difference in accuracy both depend on the size and on the quality of the study reference standard, balancing these trade-offs supports the efficient use of research resources. In this work, we derive a statistical power calculation that enables researchers to estimate the appropriate sample size to detect clinically meaningful differences in segmentation accuracy (i.e. the proportion of voxels matching the reference standard) between two algorithms. Furthermore, we derive a formula to relate reference standard errors to their effect on the sample sizes of studies using lower-quality (but potentially more affordable and practically available) reference standards. The accuracy of the derived sample size formula was estimated through Monte Carlo simulation, demonstrating, with 95% confidence, a predicted statistical power within 4% of simulated values across a range of model parameters. This corresponds to sample size errors of less than 4 subjects and errors in the detectable accuracy difference less than 0.6%. The applicability of the formula to real-world data was assessed using bootstrap resampling simulations for pairs of algorithms from the PROMISE12 prostate MR segmentation challenge data set. The model predicted the simulated power for the majority of algorithm pairs within 4% for simulated experiments using a high-quality reference standard and within 6% for simulated experiments using a low-quality reference standard. A case study, also based on the PROMISE12 data, illustrates using the formulae to evaluate whether to use a lower-quality reference standard in a prostate segmentation study. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Linking Initial Microstructure to ORR Related Property Degradation in SOFC Cathode: A Phase Field Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lei, Y.; Cheng, T. -L.; Wen, Y. H.

Microstructure evolution driven by thermal coarsening is an important factor for the loss of oxygen reduction reaction rates in SOFC cathode. In this work, the effect of an initial microstructure on the microstructure evolution in SOFC cathode is investigated using a recently developed phase field model. Specifically, we tune the phase fraction, the average grain size, the standard deviation of the grain size and the grain shape in the initial microstructure, and explore their effect on the evolution of the grain size, the density of triple phase boundary, the specific surface area and the effective conductivity in LSM-YSZ cathodes. Itmore » is found that the degradation rate of TPB density and SSA of LSM is lower with less LSM phase fraction (with constant porosity assumed) and greater average grain size, while the degradation rate of effective conductivity can also be tuned by adjusting the standard deviation of grain size distribution and grain aspect ratio. The implication of this study on the designing of an optimal initial microstructure of SOFC cathodes is discussed.« less

Linking Initial Microstructure to ORR Related Property Degradation in SOFC Cathode: A Phase Field Simulation

DOE PAGES

Lei, Y.; Cheng, T. -L.; Wen, Y. H.

2017-07-05

Microstructure evolution driven by thermal coarsening is an important factor for the loss of oxygen reduction reaction rates in SOFC cathode. In this work, the effect of an initial microstructure on the microstructure evolution in SOFC cathode is investigated using a recently developed phase field model. Specifically, we tune the phase fraction, the average grain size, the standard deviation of the grain size and the grain shape in the initial microstructure, and explore their effect on the evolution of the grain size, the density of triple phase boundary, the specific surface area and the effective conductivity in LSM-YSZ cathodes. Itmore » is found that the degradation rate of TPB density and SSA of LSM is lower with less LSM phase fraction (with constant porosity assumed) and greater average grain size, while the degradation rate of effective conductivity can also be tuned by adjusting the standard deviation of grain size distribution and grain aspect ratio. The implication of this study on the designing of an optimal initial microstructure of SOFC cathodes is discussed.« less

Study of Consumer Automotive Preference with Regard to Fuel Economy Measures

DOT National Transportation Integrated Search

1978-09-01

An analysis is made of the effects of size and weight reduction of 1977 General Motors standard size cars. A buyer profile describing demographic characteristics, age, sex, education, marital status, size of family and income by make is prepared for ...

Effect Sizes in Cluster-Randomized Designs

ERIC Educational Resources Information Center

Hedges, Larry V.

2007-01-01

Multisite research designs involving cluster randomization are becoming increasingly important in educational and behavioral research. Researchers would like to compute effect size indexes based on the standardized mean difference to compare the results of cluster-randomized studies (and corresponding quasi-experiments) with other studies and to…

Overlap between treatment and control distributions as an effect size measure in experiments.

PubMed

Hedges, Larry V; Olkin, Ingram

2016-03-01

The proportion π of treatment group observations that exceed the control group mean has been proposed as an effect size measure for experiments that randomly assign independent units into 2 groups. We give the exact distribution of a simple estimator of π based on the standardized mean difference and use it to study the small sample bias of this estimator. We also give the minimum variance unbiased estimator of π under 2 models, one in which the variance of the mean difference is known and one in which the variance is unknown. We show how to use the relation between the standardized mean difference and the overlap measure to compute confidence intervals for π and show that these results can be used to obtain unbiased estimators, large sample variances, and confidence intervals for 3 related effect size measures based on the overlap. Finally, we show how the effect size π can be used in a meta-analysis. (c) 2016 APA, all rights reserved).

Meta-Analysis of the Effect of Exercise Programs for Individuals with Intellectual Disabilities

ERIC Educational Resources Information Center

Shin, In-Soo; Park, Eun-Young

2012-01-01

The purpose of this study was to examine the effects of physical exercise programs on individuals with intellectual disabilities (ID). This meta-analysis analyzed 67 effect sizes and 14 studies and calculated the standardized mean difference in effect size. The unit of analysis for overall effects was the study, and the sub-group analysis focused…

Effect Size in Clinical Phonology

ERIC Educational Resources Information Center

Gierut, Judith A.; Morrisette, Michele L.

2011-01-01

The purpose of this article is to motivate the use of effect size (ES) for single-subject research in clinical phonology, with an eye towards meta-analyses of treatment effects for children with phonological disorders. Standard mean difference (SMD) is introduced and illustrated as one ES well suited to the multiple baseline (MBL) design and…

Distribution of the two-sample t-test statistic following blinded sample size re-estimation.

PubMed

Lu, Kaifeng

2016-05-01

We consider the blinded sample size re-estimation based on the simple one-sample variance estimator at an interim analysis. We characterize the exact distribution of the standard two-sample t-test statistic at the final analysis. We describe a simulation algorithm for the evaluation of the probability of rejecting the null hypothesis at given treatment effect. We compare the blinded sample size re-estimation method with two unblinded methods with respect to the empirical type I error, the empirical power, and the empirical distribution of the standard deviation estimator and final sample size. We characterize the type I error inflation across the range of standardized non-inferiority margin for non-inferiority trials, and derive the adjusted significance level to ensure type I error control for given sample size of the internal pilot study. We show that the adjusted significance level increases as the sample size of the internal pilot study increases. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Effect Sizes in Three-Level Cluster-Randomized Experiments

ERIC Educational Resources Information Center

Hedges, Larry V.

2011-01-01

Research designs involving cluster randomization are becoming increasingly important in educational and behavioral research. Many of these designs involve two levels of clustering or nesting (students within classes and classes within schools). Researchers would like to compute effect size indexes based on the standardized mean difference to…

A D-Estimator for Single-Case Designs

ERIC Educational Resources Information Center

Shadish, William; Hedges, Larry; Pustejovsky, James; Rindskopf, David

2012-01-01

Over the last 10 years, numerous authors have proposed effect size estimators for single-case designs. None, however, has been shown to be equivalent to the usual between-groups standardized mean difference statistic, sometimes called d. The present paper remedies that omission. Most effect size estimators for single-case designs use the…

Comparing Standard Deviation Effects across Contexts

ERIC Educational Resources Information Center

Ost, Ben; Gangopadhyaya, Anuj; Schiman, Jeffrey C.

2017-01-01

Studies using tests scores as the dependent variable often report point estimates in student standard deviation units. We note that a standard deviation is not a standard unit of measurement since the distribution of test scores can vary across contexts. As such, researchers should be cautious when interpreting differences in the numerical size of…

Favorable Responsiveness of the Hand10 Questionnaire to Assess Treatment Outcomes for Lateral Epicondylitis.

PubMed

Nishizuka, Takanobu; Iwatsuki, Katsuyuki; Kurimoto, Shigeru; Yamamoto, Michiro; Onishi, Tetsuro; Hirata, Hitoshi

2018-06-01

The aim of our study was to compare the responsiveness of the Hand10 questionnaire and the Pain visual analogue scale (VAS) for the assessment of lateral epicondylitis. The standardized response mean and effect size were used as indicators of responsiveness, measured at baseline and after 6 months of treatment. Among the 54 patients enrolled, 28 were treated using a forearm band, compress and stretching, with the other 26 patients treated using compress and stretching. The standardized response mean and the effect size were 1.18 and 1.38, respectively, of the Hand10 and 1.39 and 1.75, respectively, for the Pain VAS. The responsiveness of both tests was considered to be large, based on Cohen's classification of effect size, supporting the use of the Hand10 questionnaire to assess treatment outcomes for lateral epicondylitis.

What is the threshold for symptomatic response and remission for major depressive disorder, panic disorder, social anxiety disorder, and generalized anxiety disorder?

PubMed

Bandelow, Borwin; Baldwin, David S; Dolberg, Ornah T; Andersen, Henning Friis; Stein, Dan J

2006-09-01

Symptom-free remission is a goal for treatment in depression and anxiety disorders, but there is no consensus regarding the threshold for determining remission in individual disorders. We sought to determine these thresholds by comparing, in a post hoc analysis, scores on the Clinical Global Impressions scale (CGI) and disorder-specific symptom severity rating scales from all available studies of the treatment of major depressive disorder, panic disorder, generalized anxiety disorder, and social anxiety disorder with the same medication (escitalopram). We also sought to compare the standardized effect sizes of escitalopram for these 4 psychiatric disorders. Raw data from all randomized, double-blind, placebo-controlled, acute treatment studies sponsored by H. Lundbeck A/S (Copenhagen, Denmark) or Forest Laboratories, Inc. (New York, N.Y.), published through March 1, 2004, with patients treated with escitalopram for DSM-IV major depressive disorder (5 studies), panic disorder (1 study), generalized anxiety disorder (4 studies), or social anxiety disorder (2 studies) were compared with regard to the standardized effect sizes of change in CGI score and scores on rating scales that represent the "gold standard" for assessment of these disorders (the Montgomery-Asberg Depression Rating Scale, the Panic and Agoraphobia Scale, the Hamilton Rating Scale for Anxiety, and the Liebowitz Social Anxiety Scale, respectively). In all indications, treatment with escitalopram showed differences from placebo in treatment effect from 0.32 to 0.59 on the CGI-S and CGI-I and standardized effect sizes from 0.32 to 0.50 on the standard rating scales. There were no significant differences among the different disorders. Moderate to high correlations were found between scores on the CGI and the standard scales. The corresponding standard scale scores for CGI-defined "response" and "remission" were determined. Comparison of scores on the standard scales and scores on the CGI suggest that the traditional definition of response (i.e., a 50% reduction in a standard scale) may be too conservative.

Uterine insemination with a standard AI dose in a sow pool system.

PubMed

Peltoniemi, O A T; Alm, K; Andersson, M

2009-06-01

The effect of uterine AI with a standard dose of spermatozoa on fertility of the sow was studied in a field trial. The trial involved a sow pool system with 440 sows using AI as the primary method of breeding. Sows were twice a day checked for oestrus symptoms by back pressure test in front of a boar on days 3-6 after weaning. When in standing heat, sows were randomly allocated into either a uterine insemination group (UTER, n = 157) or standard AI group (CONT, n = 169) and bred accordingly using 3 billion spermatozoa in 80 ml of extender. In both treatment groups, insemination was repeated once if the sow was still receptive 24 h later. Using pregnancy (farrowed or not) and live-born litter size as the outcome variables, a logistic and linear regression approach, respectively, was taken to study the effect of the following factors: treatment (UTER vs CONT), AI operator, breed, satellite herd preceding weaning, parity, weaning-to-oestrus interval and length of lactation. Overall, live-born litter size was 11.3 +/- 2.9, repeat breeding rate 4.2% and farrowing rate 91.2%. In the UTER group, 93.6% of inseminated sows farrowed, whereas farrowing rate for the CONT group was 88.8% (p = 0.13). Intrauterine insemination with a standard AI dose did not result in a significant improvement in the live-born litter size (11.5 +/- 2.8 for the UTER and 11.1 +/- 3.0 for the CONT sows, respectively, p = 0.13). However, the preceding satellite herd had a highly significant effect on the live-born litter size (12.4 +/- 2.6; 11.1 +/- 2.9; 10.8 +/- 2.9 and 10.9 +/- 2.9 for the four satellite herds, p < 0.01). We conclude that uterine insemination did not have a significant effect on live-born litter size and farrowing rate and we also conclude that satellite herd appears to have a major effect on fertility in a sow pool system.

Procedural Sensitivities of Effect Sizes for Single-Case Designs with Directly Observed Behavioral Outcome Measures

ERIC Educational Resources Information Center

Pustejovsky, James E.

2018-01-01

A wide variety of effect size indices have been proposed for quantifying the magnitude of treatment effects in single-case designs. Commonly used measures include parametric indices such as the standardized mean difference, as well as non-overlap measures such as the percentage of non-overlapping data, improvement rate difference, and non-overlap…

Selection of the effect size for sample size determination for a continuous response in a superiority clinical trial using a hybrid classical and Bayesian procedure.

PubMed

Ciarleglio, Maria M; Arendt, Christopher D; Peduzzi, Peter N

2016-06-01

When designing studies that have a continuous outcome as the primary endpoint, the hypothesized effect size ([Formula: see text]), that is, the hypothesized difference in means ([Formula: see text]) relative to the assumed variability of the endpoint ([Formula: see text]), plays an important role in sample size and power calculations. Point estimates for [Formula: see text] and [Formula: see text] are often calculated using historical data. However, the uncertainty in these estimates is rarely addressed. This article presents a hybrid classical and Bayesian procedure that formally integrates prior information on the distributions of [Formula: see text] and [Formula: see text] into the study's power calculation. Conditional expected power, which averages the traditional power curve using the prior distributions of [Formula: see text] and [Formula: see text] as the averaging weight, is used, and the value of [Formula: see text] is found that equates the prespecified frequentist power ([Formula: see text]) and the conditional expected power of the trial. This hypothesized effect size is then used in traditional sample size calculations when determining sample size for the study. The value of [Formula: see text] found using this method may be expressed as a function of the prior means of [Formula: see text] and [Formula: see text], [Formula: see text], and their prior standard deviations, [Formula: see text]. We show that the "naïve" estimate of the effect size, that is, the ratio of prior means, should be down-weighted to account for the variability in the parameters. An example is presented for designing a placebo-controlled clinical trial testing the antidepressant effect of alprazolam as monotherapy for major depression. Through this method, we are able to formally integrate prior information on the uncertainty and variability of both the treatment effect and the common standard deviation into the design of the study while maintaining a frequentist framework for the final analysis. Solving for the effect size which the study has a high probability of correctly detecting based on the available prior information on the difference [Formula: see text] and the standard deviation [Formula: see text] provides a valuable, substantiated estimate that can form the basis for discussion about the study's feasibility during the design phase. © The Author(s) 2016.

Introducing the Mean Absolute Deviation "Effect" Size

ERIC Educational Resources Information Center

Gorard, Stephen

2015-01-01

This paper revisits the use of effect sizes in the analysis of experimental and similar results, and reminds readers of the relative advantages of the mean absolute deviation as a measure of variation, as opposed to the more complex standard deviation. The mean absolute deviation is easier to use and understand, and more tolerant of extreme…

Useful Effect Size Interpretations for Single Case Research

ERIC Educational Resources Information Center

Parker, Richard I.; Hagan-Burke, Shanna

2007-01-01

An obstacle to broader acceptability of effect sizes in single case research is their lack of intuitive and useful interpretations. Interpreting Cohen's d as "standard deviation units difference" and R[superscript 2] as "percent of variance accounted for" do not resound with most visual analysts. In fact, the only comparative analysis widely…

How much should I eat? Situational norms affect young women's food intake during meal time.

PubMed

Hermans, Roel C J; Larsen, Junilla K; Herman, C Peter; Engels, Rutger C M E

2012-02-01

Portion size and the intake of others have been found to influence people's food intake. No study, however, has tested the potential influences of both types of situational norms on intake during the same eating occasion. We experimentally tested the effects of manipulating portion size and the intake of others on young women's meal intake during a 20 min eating opportunity. An experimental design with a three (confederate's intake: small, standard, large) by two (portion size: small, standard) between-participants design was used. A total of eighty-five young women participated. Portion size and the confederate's intake both influenced young women's intake. Participants consumed more when offered a larger portion than when offered a smaller portion, and they also ate more when their eating companion ate more. The present results indicate that the effects of portion size and the intake of others were independent but additive. Thus, both types of situational norms might independently guide an individual's intake during a single eating occasion.

A standardized sampling protocol for channel catfish in prairie streams

USGS Publications Warehouse

Vokoun, Jason C.; Rabeni, Charles F.

2001-01-01

Three alternative gears—an AC electrofishing raft, bankpoles, and a 15-hoop-net set—were used in a standardized manner to sample channel catfish Ictalurus punctatus in three prairie streams of varying size in three seasons. We compared these gears as to time required per sample, size selectivity, mean catch per unit effort (CPUE) among months, mean CPUE within months, effect of fluctuating stream stage, and sensitivity to population size. According to these comparisons, the 15-hoop-net set used during stable water levels in October had the most desirable characteristics. Using our catch data, we estimated the precision of CPUE and size structure by varying sample sizes for the 15-hoop-net set. We recommend that 11–15 repetitions of the 15-hoop-net set be used for most management activities. This standardized basic unit of effort will increase the precision of estimates and allow better comparisons among samples as well as increased confidence in management decisions.

What is a species? A new universal method to measure differentiation and assess the taxonomic rank of allopatric populations, using continuous variables

PubMed Central

Donegan, Thomas M.

2018-01-01

Abstract Existing models for assigning species, subspecies, or no taxonomic rank to populations which are geographically separated from one another were analyzed. This was done by subjecting over 3,000 pairwise comparisons of vocal or biometric data based on birds to a variety of statistical tests that have been proposed as measures of differentiation. One current model which aims to test diagnosability (Isler et al. 1998) is highly conservative, applying a hard cut-off, which excludes from consideration differentiation below diagnosis. It also includes non-overlap as a requirement, a measure which penalizes increases to sample size. The “species scoring” model of Tobias et al. (2010) involves less drastic cut-offs, but unlike Isler et al. (1998), does not control adequately for sample size and attributes scores in many cases to differentiation which is not statistically significant. Four different models of assessing effect sizes were analyzed: using both pooled and unpooled standard deviations and controlling for sample size using t-distributions or omitting to do so. Pooled standard deviations produced more conservative effect sizes when uncontrolled for sample size but less conservative effect sizes when so controlled. Pooled models require assumptions to be made that are typically elusive or unsupported for taxonomic studies. Modifications to improving these frameworks are proposed, including: (i) introducing statistical significance as a gateway to attributing any weighting to findings of differentiation; (ii) abandoning non-overlap as a test; (iii) recalibrating Tobias et al. (2010) scores based on effect sizes controlled for sample size using t-distributions. A new universal method is proposed for measuring differentiation in taxonomy using continuous variables and a formula is proposed for ranking allopatric populations. This is based first on calculating effect sizes using unpooled standard deviations, controlled for sample size using t-distributions, for a series of different variables. All non-significant results are excluded by scoring them as zero. Distance between any two populations is calculated using Euclidian summation of non-zeroed effect size scores. If the score of an allopatric pair exceeds that of a related sympatric pair, then the allopatric population can be ranked as species and, if not, then at most subspecies rank should be assigned. A spreadsheet has been programmed and is being made available which allows this and other tests of differentiation and rank studied in this paper to be rapidly analyzed. PMID:29780266

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arbique, G; Anderson, J; Guild, J

Purpose: The National Lung Screening Trial mandated manual low dose CT technique factors, where up to a doubling of radiation output could be used over a regular to large patient size range. Recent guidance from the AAPM and ACR for lung cancer CT screening recommends radiation output adjustment for patient size either through AEC or a manual technique chart. This study evaluated the use of AEC for output control and dose reduction. Methods: The study was performed on a multidetector helical CT scanner (Aquillion ONE, Toshiba Medical) equipped with iterative reconstruction (ADIR-3D), AEC was adjusted with a standard deviation (SD)more » image quality noise index. The protocol SD parameter was incrementally increased to reduce patient population dose while image quality was evaluated by radiologist readers scoring the clinical utility of images on a Likert scale. Results: Plots of effective dose vs. body size (water cylinder diameter reported by the scanner) demonstrate monotonic increase in patient dose with increasing patient size. At the initial SD setting of 19 the average CTDIvol for a standard size patient was ∼ 2.0 mGy (1.2 mSv effective dose). This was reduced to ∼1.0 mGy (0.5 mSv) at an SD of 25 with no noticeable reduction in clinical utility of images as demonstrated by Likert scoring. Plots of effective patient diameter and BMI vs body size indicate that these metrics could also be used for manual technique charts. Conclusion: AEC offered consistent and reliable control of radiation output in this study. Dose for a standard size patient was reduced to one-third of the 3 mGy CTDIvol limit required for ACR accreditation of lung cancer CT screening. Gary Arbique: Research Grant, Toshiba America Medical Systems; Cecelia Brewington: Research Grant, Toshiba America Medical Systems; Di Zhang: Employee, Toshiba America Medical Systems.« less

Effects of Casting Size on Microstructure and Mechanical Properties of Spheroidal and Compacted Graphite Cast Irons: Experimental Results and Comparison with International Standards

NASA Astrophysics Data System (ADS)

Ceschini, L.; Morri, Alessandro; Morri, Andrea

2017-05-01

The aim of this research was to investigate the effects of casting size (10-210 mm) on the microstructure and mechanical properties of spheroidal (SGI) and compacted (CGI) graphite cast irons. A comparison of the experimental mechanical data with those specified by ISO standards is presented and discussed. The study highlighted that the microstructure and mechanical properties of SGI (also known as ductile or nodular cast iron) are more sensitive to casting size than CGI (also known as vermicular graphite cast irons). In particular, in both types of cast iron, hardness, yield strength and ultimate tensile strength decreased, with increasing casting size, by 27% in SGI and 17% in CGI. Elongation to failure showed, instead, an opposite trend, decreasing from 5 to 3% in CGI, while increasing from 5 to 11% in SGI. These results were related to different microstructures, the ferritic fraction being more sensitive to the casting size in SGI than CGI. Degeneration of spheroidal graphite was observed at casting size above 120 mm. The microstructural similarities between degenerated SGI and CGI suggested the proposal of a unified empirical constitutional law relating the most important microstructural parameters to the ultimate tensile strength. An outstanding result was also the finding that standard specifications underestimated the mechanical properties of both cast irons (in particular SGI) and, moreover, did not take into account their variation with casting size, at thicknesses over 60 mm.

Effect of specimen size and grain orientation on the mechanical and physical properties of NBG-18 nuclear graphite

DOE PAGES

Vasudevamurthy, G.; Byun, T. S.; Pappano, Pete; ...

2015-03-13

Here we present a comparison of the measured baseline mechanical and physical properties of with grain (WG) and against grain (AG) non-ASTM size NBG-18 graphite. The objectives of the experiments were twofold: (1) assess the variation in properties with grain orientation; (2) establish a correlation between specimen tensile strength and size. The tensile strength of the smallest sized (4 mm diameter) specimens were about 5% higher than the standard specimens (12 mm diameter) but still within one standard deviation of the ASTM specimen size indicating no significant dependence of strength on specimen size. The thermal expansion coefficient and elastic constantsmore » did not show significant dependence on specimen size. Lastly, experimental data indicated that the variation of thermal expansion coefficient and elastic constants were still within 5% between the different grain orientations, confirming the isotropic nature of NBG-18 graphite in physical properties.« less

Effect of grid transparency and finite collector size on determining ion temperature and density by the retarding potential analyzer

NASA Technical Reports Server (NTRS)

Troy, B. E., Jr.; Maier, E. J.

1975-01-01

The effects of the grid transparency and finite collector size on the values of thermal ion density and temperature determined by the standard RPA (retarding potential analyzer) analysis method are investigated. The current-voltage curves calculated for varying RPA parameters and a given ion mass, temperature, and density are analyzed by the standard RPA method. It is found that only small errors in temperature and density are introduced for an RPA with typical dimensions, and that even when the density error is substantial for nontypical dimensions, the temperature error remains minimum.

48 CFR 926.7004 - Size standard for Energy Policy Act procurements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Policy Act of 1992 926.7004 Size standard for Energy Policy Act procurements. The size standard for Energy Policy Act engineering services procurements (SIC 8711) shall be the size standard specified for... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Size standard for Energy...

A real-time standard parts inspection based on deep learning

NASA Astrophysics Data System (ADS)

Xu, Kuan; Li, XuDong; Jiang, Hongzhi; Zhao, Huijie

2017-10-01

Since standard parts are necessary components in mechanical structure like bogie and connector. These mechanical structures will be shattered or loosen if standard parts are lost. So real-time standard parts inspection systems are essential to guarantee their safety. Researchers would like to take inspection systems based on deep learning because it works well in image with complex backgrounds which is common in standard parts inspection situation. A typical inspection detection system contains two basic components: feature extractors and object classifiers. For the object classifier, Region Proposal Network (RPN) is one of the most essential architectures in most state-of-art object detection systems. However, in the basic RPN architecture, the proposals of Region of Interest (ROI) have fixed sizes (9 anchors for each pixel), they are effective but they waste much computing resources and time. In standard parts detection situations, standard parts have given size, thus we can manually choose sizes of anchors based on the ground-truths through machine learning. The experiments prove that we could use 2 anchors to achieve almost the same accuracy and recall rate. Basically, our standard parts detection system could reach 15fps on NVIDIA GTX1080 (GPU), while achieving detection accuracy 90.01% mAP.

Effect of the Macintosh curved blade size on direct laryngoscopic view in edentulous patients.

PubMed

Kim, Hyerim; Chang, Jee-Eun; Han, Sung-Hee; Lee, Jung-Man; Yoon, Soohyuk; Hwang, Jin-Young

2018-01-01

In the present study, we compared the laryngoscopic view depending on the size of the Macintosh curved blade in edentulous patients. Thirty-five edentulous adult patients scheduled for elective surgery were included in the study. After induction of anesthesia, two direct laryngoscopies were performed alternately using a standard-sized Macintosh curved blade (No. 4 for men and No. 3 for women) and smaller-sized Macintosh curved blade (No. 3 for men and No. 2 for women). During direct laryngoscopy with each blade, two digital photographs of the lateral view were taken when the blade tip was placed in the valleculae; the laryngoscope was lifted to achieve the best laryngeal view. Then, the best laryngeal views were assessed using the percentage of glottic opening (POGO) score. On the photographs of the lateral view of direct laryngoscopy, the angles between the line extending along the laryngoscopic handle and the horizontal line were measured. The POGO score was improved with the smaller-sized blade compared with the standard-sized blade (87.3% [11.8%] vs. 71.3% [20.0%], P<0.001, respectively). The angles between the laryngoscopic handle and the horizontal line were greater with the smaller-sized blade compared to the standard-sized blade when the blade tip was placed on the valleculae and when the laryngoscope was lifted to achieve the best laryngeal view (both P<0.001). Compared to a standard-sized Macintosh blade, a smaller-sized Macintosh curved blade improved the laryngeal exposure in edentulous patients. Copyright © 2017 Elsevier Inc. All rights reserved.

Role of a texture gradient in the perception of relative size.

PubMed

Tozawa, Junko

2010-01-01

Two theories regarding the role of a texture gradient in the perception of the relative size of objects are compared. Relational theory states that relative size is directly specified by the projective ratio of the numbers of texture elements spanned by objects. Distance calibration theory assumes that relative size is a product of visual angle and distance, once the distance is specified by the texture. Experiment 1 involved three variables: background (no texture, texture gradient patterns), the ratio of heights of the comparison stimulus to a standard (three levels), and angular vertical separation of the standard stimulus below the horizon (two levels). The effect of the retinal length of the comparison stimulus was examined in experiment 2. In both experiments, participants judged both the apparent size and distance of a comparison stimulus relative to a standard stimulus. Results suggest that the cues selected by observers to judge relative size were to some degree different from those used to judge relative distance. Relative size was strongly affected by a texture gradient and the retinal length of a comparison stimulus whereas relative distance perception was affected by relative height. When dominant cues that specify size are different from those which specify distance, relational theory might provide a better account of relative size perception than distance calibration theory.

Paraprofessional-delivered home-visiting intervention for American Indian teen mothers and children: 3-year outcomes from a randomized controlled trial.

PubMed

Barlow, Allison; Mullany, Britta; Neault, Nicole; Goklish, Novalene; Billy, Trudy; Hastings, Ranelda; Lorenzo, Sherilynn; Kee, Crystal; Lake, Kristin; Redmond, Cleve; Carter, Alice; Walkup, John T

2015-02-01

The Affordable Care Act provides funding for home-visiting programs to reduce health care disparities, despite limited evidence that existing programs can overcome implementation and evaluation challenges with at-risk populations. The authors report 36-month outcomes of the paraprofessional-delivered Family Spirit home-visiting intervention for American Indian teen mothers and children. Expectant American Indian teens (N=322, mean age=18.1 years) from four southwestern reservation communities were randomly assigned to the Family Spirit intervention plus optimized standard care or optimized standard care alone. Maternal and child outcomes were evaluated at 28 and 36 weeks gestation and 2, 6, 12, 18, 24, 30, and 36 months postpartum. At baseline the mothers had high rates of substance use (>84%), depressive symptoms (>32%), dropping out of school (>57%), and residential instability (51%). Study retention was ≥83%. From pregnancy to 36 months postpartum, mothers in the intervention group had significantly greater parenting knowledge (effect size=0.42) and parental locus of control (effect size=0.17), fewer depressive symptoms (effect size=0.16) and externalizing problems (effect size=0.14), and lower past month use of marijuana (odds ratio=0.65) and illegal drugs (odds ratio=0.67). Children in the intervention group had fewer externalizing (effect size=0.23), internalizing (effect size=0.23), and dysregulation (effect size=0.27) problems. The paraprofessional home-visiting intervention promoted effective parenting, reduced maternal risks, and improved child developmental outcomes in the U.S. population subgroup with the fewest resources and highest behavioral health disparities. The methods and results can inform federal efforts to disseminate and sustain evidence-based home-visiting interventions in at-risk populations.

A Standardized Mean Difference Effect Size for Single Case Designs

ERIC Educational Resources Information Center

Hedges, Larry V.; Pustejovsky, James E.; Shadish, William R.

2012-01-01

Single case designs are a set of research methods for evaluating treatment effects by assigning different treatments to the same individual and measuring outcomes over time and are used across fields such as behavior analysis, clinical psychology, special education, and medicine. Emerging standards for single case designs have focused attention on…

Internal standards in fluorescent X-ray spectroscopy1 1 Publication authorized by the Director, U.S. Geological Survey.

USGS Publications Warehouse

Adler, I.; Axelrod, J.M.

1955-01-01

The use of internal standards in the analysis of ores and minerals of widely-varying matrix by means of fluorescent X-ray spectroscopy is frequently the most practical approach. Internal standards correct for absorption and enhancement effects except when an absorption edge falls between the comparison lines or a very strong emission line falls between the absorption edges responsible for the comparison lines. Particle size variations may introduce substantial errors. One method of coping with the particle size problem is grinding the sample with an added abrasive. ?? 1955.

Packing Fraction of a Two-dimensional Eden Model with Random-Sized Particles

NASA Astrophysics Data System (ADS)

Kobayashi, Naoki; Yamazaki, Hiroshi

2018-01-01

We have performed a numerical simulation of a two-dimensional Eden model with random-size particles. In the present model, the particle radii are generated from a Gaussian distribution with mean μ and standard deviation σ. First, we have examined the bulk packing fraction for the Eden cluster and investigated the effects of the standard deviation and the total number of particles NT. We show that the bulk packing fraction depends on the number of particles and the standard deviation. In particular, for the dependence on the standard deviation, we have determined the asymptotic value of the bulk packing fraction in the limit of the dimensionless standard deviation. This value is larger than the packing fraction obtained in a previous study of the Eden model with uniform-size particles. Secondly, we have investigated the packing fraction of the entire Eden cluster including the effect of the interface fluctuation. We find that the entire packing fraction depends on the number of particles while it is independent of the standard deviation, in contrast to the bulk packing fraction. In a similar way to the bulk packing fraction, we have obtained the asymptotic value of the entire packing fraction in the limit NT → ∞. The obtained value of the entire packing fraction is smaller than that of the bulk value. This fact suggests that the interface fluctuation of the Eden cluster influences the packing fraction.

Combinative Particle Size Reduction Technologies for the Production of Drug Nanocrystals

PubMed Central

Salazar, Jaime; Müller, Rainer H.; Möschwitzer, Jan P.

2014-01-01

Nanosizing is a suitable method to enhance the dissolution rate and therefore the bioavailability of poorly soluble drugs. The success of the particle size reduction processes depends on critical factors such as the employed technology, equipment, and drug physicochemical properties. High pressure homogenization and wet bead milling are standard comminution techniques that have been already employed to successfully formulate poorly soluble drugs and bring them to market. However, these techniques have limitations in their particle size reduction performance, such as long production times and the necessity of employing a micronized drug as the starting material. This review article discusses the development of combinative methods, such as the NANOEDGE, H 96, H 69, H 42, and CT technologies. These processes were developed to improve the particle size reduction effectiveness of the standard techniques. These novel technologies can combine bottom-up and/or top-down techniques in a two-step process. The combinative processes lead in general to improved particle size reduction effectiveness. Faster production of drug nanocrystals and smaller final mean particle sizes are among the main advantages. The combinative particle size reduction technologies are very useful formulation tools, and they will continue acquiring importance for the production of drug nanocrystals. PMID:26556191

The Impact of APA and AERA Guidelines on Effect Size Reporting

ERIC Educational Resources Information Center

Peng, Chao-Ying Joanne; Chen, Li-Ting; Chiang, Hsu-Min; Chiang, Yi-Chen

2013-01-01

Given the long history of effect size (ES) indices (Olejnik and Algina, "Contemporary Educational Psychology," 25, 241-286 2000) and various attempts by APA and AERA to encourage the reporting and interpretation of ES to supplement findings from inferential statistical analyses, it is essential to document the impact of APA and AERA standards on…

A meta-analysis on the effectiveness of computer-assisted instruction in science education

NASA Astrophysics Data System (ADS)

Bayraktar, Sule

2000-10-01

The purposes of this study were to determine whether Computer-Assisted Instruction (CAI) had an overall positive effect on student achievement in secondary and college level science education when compared with traditional forms of instruction and to determine whether specific study or program characteristics were related to CAI effectiveness. This study employed a meta analytic research approach. First, the research studies comparing student achievement between CAI and traditional instruction in science were located by using electronic search databases. The search resulted in 42 studies producing 108 effect sizes. Second, the study features and effect sizes for each study were coded. Finally, the effect sizes provided from each study were combined to provide an overall effect size, and relationships between effect sizes and study features were then examined. The overall effect size was found to be 0.273 standard deviations, suggesting that CAI has a small positive effect on student achievement in science education at the college and secondary levels when compared with traditional forms of instruction. An effect size of 0.273 standard deviations indicates that an average student exposed to CAI exceeded the performance of 62% of the students who were taught by using traditional instructional methods. In other words, the typical student moved from the 50th percentile to the 62 nd percentile in science when CAI was used. All variables excluding school level and publication status were found to be related to effect sizes. According to the results of the analysis, CAI was most effective in physics education and had little effect on chemistry and biology achievement. Simulation and tutorial programs had significant effects on student achievement in science education but drill and practice was not found effective. The results also indicated that individual utilization of CAI was preferable. Another finding from the study is that experimenter-developed software was more effective than commercial, and that CAI was more effective than traditional instruction when the duration of treatment was shorter than 4 weeks. Furthermore, the results also indicated that the effectiveness of CAI in science subject areas decreased over the decades.

Estimation of Tooth Size Discrepancies among Different Malocclusion Groups.

PubMed

Hasija, Narender; Bala, Madhu; Goyal, Virender

2014-05-01

Regards and Tribute: Late Dr Narender Hasija was a mentor and visionary in the light of knowledge and experience. We pay our regards with deepest gratitude to the departed soul to rest in peace. Bolton's ratios help in estimating overbite, overjet relationships, the effects of contemplated extractions on posterior occlusion, incisor relationships and identification of occlusal misfit produced by tooth size discrepancies. To determine any difference in tooth size discrepancy in anterior as well as overall ratio in different malocclusions and comparison with Bolton's study. After measuring the teeth on all 100 patients, Bolton's analysis was performed. Results were compared with Bolton's means and standard deviations. The results were also subjected to statistical analysis. Results show that the mean and standard deviations of ideal occlusion cases are comparable with those Bolton but, when the mean and standard deviation of malocclusion groups are compared with those of Bolton, the values of standard deviation are higher, though the mean is comparable. How to cite this article: Hasija N, Bala M, Goyal V. Estimation of Tooth Size Discrepancies among Different Malocclusion Groups. Int J Clin Pediatr Dent 2014;7(2):82-85.

Quantitative radiomics: impact of stochastic effects on textural feature analysis implies the need for standards

PubMed Central

Nyflot, Matthew J.; Yang, Fei; Byrd, Darrin; Bowen, Stephen R.; Sandison, George A.; Kinahan, Paul E.

2015-01-01

Abstract. Image heterogeneity metrics such as textural features are an active area of research for evaluating clinical outcomes with positron emission tomography (PET) imaging and other modalities. However, the effects of stochastic image acquisition noise on these metrics are poorly understood. We performed a simulation study by generating 50 statistically independent PET images of the NEMA IQ phantom with realistic noise and resolution properties. Heterogeneity metrics based on gray-level intensity histograms, co-occurrence matrices, neighborhood difference matrices, and zone size matrices were evaluated within regions of interest surrounding the lesions. The impact of stochastic variability was evaluated with percent difference from the mean of the 50 realizations, coefficient of variation and estimated sample size for clinical trials. Additionally, sensitivity studies were performed to simulate the effects of patient size and image reconstruction method on the quantitative performance of these metrics. Complex trends in variability were revealed as a function of textural feature, lesion size, patient size, and reconstruction parameters. In conclusion, the sensitivity of PET textural features to normal stochastic image variation and imaging parameters can be large and is feature-dependent. Standards are needed to ensure that prospective studies that incorporate textural features are properly designed to measure true effects that may impact clinical outcomes. PMID:26251842

Quantitative radiomics: impact of stochastic effects on textural feature analysis implies the need for standards.

PubMed

Nyflot, Matthew J; Yang, Fei; Byrd, Darrin; Bowen, Stephen R; Sandison, George A; Kinahan, Paul E

2015-10-01

Image heterogeneity metrics such as textural features are an active area of research for evaluating clinical outcomes with positron emission tomography (PET) imaging and other modalities. However, the effects of stochastic image acquisition noise on these metrics are poorly understood. We performed a simulation study by generating 50 statistically independent PET images of the NEMA IQ phantom with realistic noise and resolution properties. Heterogeneity metrics based on gray-level intensity histograms, co-occurrence matrices, neighborhood difference matrices, and zone size matrices were evaluated within regions of interest surrounding the lesions. The impact of stochastic variability was evaluated with percent difference from the mean of the 50 realizations, coefficient of variation and estimated sample size for clinical trials. Additionally, sensitivity studies were performed to simulate the effects of patient size and image reconstruction method on the quantitative performance of these metrics. Complex trends in variability were revealed as a function of textural feature, lesion size, patient size, and reconstruction parameters. In conclusion, the sensitivity of PET textural features to normal stochastic image variation and imaging parameters can be large and is feature-dependent. Standards are needed to ensure that prospective studies that incorporate textural features are properly designed to measure true effects that may impact clinical outcomes.

Kic size effect study on two high-strength steels using notched bend specimens

NASA Technical Reports Server (NTRS)

Stonesifer, F. R.

1974-01-01

Five methods are used to calculate plane strain fracture toughness (K sub Q) values for bend-specimens of various sizes from two high-strength steels. None of the methods appeared to satisfactorily predict valid stress intensity factor (K sub IC) values from specimens of sizes well below that required by E399 standard tests.

Virtual reality exposure therapy for the treatment of anxiety disorders: an evaluation of research quality.

PubMed

McCann, Russell A; Armstrong, Christina M; Skopp, Nancy A; Edwards-Stewart, Amanda; Smolenski, Derek J; June, Jennifer D; Metzger-Abamukong, Melinda; Reger, Greg M

2014-08-01

Randomized controlled trials (RCTs) support the effectiveness of virtual reality exposure therapy (VRET) for anxiety disorders; however, the overall quality of the VRET RCT literature base has yet to be evaluated. This study reviewed 27 VRET RCTs and the degree of adherence to 8 RCT research design criteria derived from existing standards. Adherence to the study quality criteria was generally low as the articles met an average 2.85 criteria (SD=1.56). None of the studies met more than six quality criteria. Study quality did not predict effect size; however, a reduction in effect size magnitude was observed for studies with larger sample sizes when comparing VRET to non-active control groups. VRET may be an effective method of treatment but caution should be exercised in interpreting the existing body of literature supporting VRET relative to existing standards of care. The need for well-designed VRET research is discussed. Copyright © 2014. Published by Elsevier Ltd.

77 FR 39385 - Receipts-Based, Small Business Size Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... Business Size Standard AGENCY: Nuclear Regulatory Commission. ACTION: Direct final rule. SUMMARY: The U.S.... The NRC is increasing its receipts-based, small business size standard from $6.5 million to $7 million to conform to the standard set by the Small Business Administration (SBA). This size standard...

Large Variations in Declared Serving Sizes of Packaged Foods in Australia: A Need for Serving Size Standardisation?

PubMed Central

Yang, Suzie; Gemming, Luke

2018-01-01

Declared serving sizes on food packaging are unregulated in Australia, and variations in serving size within similar products reduces the usability of this information. This study aimed to (i) assess the variations in declared serving sizes of packaged foods from the Five Food Groups, and (ii) compare declared serving sizes to the Australian Dietary Guidelines standard serves and typical portion sizes consumed by Australian adults. Product information, including serving size, was collected for 4046 products from four major Australian retailers. Within product categories from the Five Food Groups, coefficients of variation ranged from 0% to 59% for declared serving size and 9% to 64% for energy per serving. Overall, 24% of all products displayed serving sizes similar (within ±10%) to the standard serves, and 23–28% were similar to typical portion sizes consumed by adults, for females and males, respectively. In conclusion, there is substantial variation in the declared serving sizes of packaged foods from the Five Food Groups, and serving sizes are not aligned with either the Dietary Guidelines or typical portion sizes consumed. Future research into effective means of standardising serving sizes is warranted. PMID:29382083

Goals and strategies for estimating trends in landbird abundance

Treesearch

Jonathan Bart; Kenneth P. Burnham; Erica H. Dunn; Charles M. Francis; C. John Ralph

2004-01-01

Reliable estimates of trends in population size are critical to effective management of landbirds. We propose a standard for considering that landbird populations are adequately monitored: 80% power to detect a 50% decline occurring within 20 years, using a 2-tailed test and a significance level of 0.10, and incorporating effects of potential bias. Our standard also...

77 FR 39442 - Receipts-Based, Small Business Size Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... RIN 3150-AJ14 [NRC-2012-0062] Receipts-Based, Small Business Size Standard AGENCY: Nuclear Regulatory... business size standard from $6.5 million to $7 million to conform to the standard set by the Small Business... updating the receipts-based, small business size standard from $6.5 million to $7.0 million. Adequate...

The Effective Dynamic Ranges for Glaucomatous Visual Field Progression With Standard Automated Perimetry and Stimulus Sizes III and V.

PubMed

Wall, Michael; Zamba, Gideon K D; Artes, Paul H

2018-01-01

It has been shown that threshold estimates below approximately 20 dB have little effect on the ability to detect visual field progression in glaucoma. We aimed to compare stimulus size V to stimulus size III, in areas of visual damage, to confirm these findings by using (1) a different dataset, (2) different techniques of progression analysis, and (3) an analysis to evaluate the effect of censoring on mean deviation (MD). In the Iowa Variability in Perimetry Study, 120 glaucoma subjects were tested every 6 months for 4 years with size III SITA Standard and size V Full Threshold. Progression was determined with three complementary techniques: pointwise linear regression (PLR), permutation of PLR, and linear regression of the MD index. All analyses were repeated on "censored'' datasets in which threshold estimates below a given criterion value were set to equal the criterion value. Our analyses confirmed previous observations that threshold estimates below 20 dB contribute much less to visual field progression than estimates above this range. These findings were broadly similar with stimulus sizes III and V. Censoring of threshold values < 20 dB has relatively little impact on the rates of visual field progression in patients with mild to moderate glaucoma. Size V, which has lower retest variability, performs at least as well as size III for longitudinal glaucoma progression analysis and appears to have a larger useful dynamic range owing to the upper sensitivity limit being higher.

77 FR 55737 - Small Business Size Standards: Finance and Insurance and Management of Companies and Enterprises

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

...The U.S. Small Business Administration (SBA) proposes to increase small business size standards for 37 industries in North American Industry Classification System (NAICS) Sector 52, Finance and Insurance, and for two industries in NAICS Sector 55, Management of Companies and Enterprises. In addition, SBA proposes to change the measure of size from average assets to average receipts for NAICS 522293, International Trade Financing. As part of its ongoing comprehensive size standards review, SBA evaluated all receipts based and assets based size standards in NAICS Sectors 52 and 55 to determine whether they should be retained or revised. This proposed rule is one of a series of proposed rules that will review size standards of industries grouped by NAICS Sector. SBA issued a White Paper entitled ``Size Standards Methodology'' and published a notice in the October 21, 2009 issue of the Federal Register to advise the public that the document is available on its Web site at www.sba.gov/size for public review and comments. The ``Size Standards Methodology'' White Paper explains how SBA establishes, reviews, and modifies its receipts based and employee based small business size standards. In this proposed rule, SBA has applied its methodology that pertains to establishing, reviewing, and modifying a receipts based size standard.

Paying attention to attention: evidence for an attentional contribution to the size congruity effect.

PubMed

Risko, Evan F; Maloney, Erin A; Fugelsang, Jonathan A

2013-08-01

Understanding the mechanisms supporting our comprehension of magnitude information represents a key goal in cognitive psychology. A major phenomenon employed in the pursuit of this goal has been the physical size congruity effect-namely, the observation that comparing the relative numerical sizes of two numbers is influenced by their relative physical sizes. The standard account of the physical size congruity effect attributes it to the automatic influence of the comparison of irrelevant physical magnitudes on numerical judgments. Here we develop an alternative account of this effect on the basis of the operation of attention in the typical size congruity display and the temporal dynamics of number comparison. We also provide a test of a number of predictions derived from this alternative account by combining a physical size congruity manipulation with a manipulation designed to alter the operation of attention within the typical size congruity display (i.e., a manipulation of the relative onsets of the digits). This test provides evidence consistent with an attentional contribution to the size congruity effect. Implications for our understanding of magnitude and the interactions between attention and magnitude are discussed.

Odds Ratio, Delta, ETS Classification, and Standardization Measures of DIF Magnitude for Binary Logistic Regression

ERIC Educational Resources Information Center

Monahan, Patrick O.; McHorney, Colleen A.; Stump, Timothy E.; Perkins, Anthony J.

2007-01-01

Previous methodological and applied studies that used binary logistic regression (LR) for detection of differential item functioning (DIF) in dichotomously scored items either did not report an effect size or did not employ several useful measures of DIF magnitude derived from the LR model. Equations are provided for these effect size indices.…

RESPONSIVENESS OF THE ACTIVITIES OF DAILY LIVING SCALE OF THE KNEE OUTCOME SURVEY AND NUMERIC PAIN RATING SCALE IN PATIENTS WITH PATELLOFEMORAL PAIN

PubMed Central

Piva, Sara R.; Gil, Alexandra B.; Moore, Charity G.; Fitzgerald, G. Kelley

2016-01-01

Objective To assess internal and external responsiveness of the Activity of Daily Living Scale of the Knee Outcome Survey and Numeric Pain Rating Scale on patients with patellofemoral pain. Design One group pre-post design. Subjects A total of 60 individuals with patellofemoral pain (33 women; mean age 29.9 (standard deviation 9.6) years). Methods The Activity of Daily Living Scale and the Numeric Pain Rating Scale were assessed before and after 8 weeks of physical therapy program. Patients completed a global rating of change scale at the end of therapy. The standardized effect size, Guyatt responsiveness index, and the minimum clinical important difference were calculated. Results Standardized effect size of the Activity of Daily Living Scale was 0.63, Guyatt responsiveness index was 1.4, area under the curve was 0.83 (95% confidence interval: 0.72, 0.94), and the minimum clinical important difference corresponded to an increase of 7.1 percentile points. Standardized effect size of the Numeric Pain Rating Scale was 0.72, Guyatt responsiveness index was 2.2, area under the curve was 0.80 (95% confidence interval: 0.70, 0.92), and the minimum clinical important difference corresponded to a decrease of 1.16 points. Conclusion Information from this study may be helpful to therapists when evaluating the effectiveness of rehabilitation intervention on physical function and pain, and to power future clinical trials on patients with patellofemoral pain. PMID:19229444

Responsiveness of the activities of daily living scale of the knee outcome survey and numeric pain rating scale in patients with patellofemoral pain.

PubMed

Piva, Sara R; Gil, Alexandra B; Moore, Charity G; Fitzgerald, G Kelley

2009-02-01

To assess internal and external responsiveness of the Activity of Daily Living Scale of the Knee Outcome Survey and Numeric Pain Rating Scale on patients with patellofemoral pain. One group pre-post design. A total of 60 individuals with patellofemoral pain (33 women; mean age 29.9 (standard deviation 9.6) years). The Activity of Daily Living Scale and the Numeric Pain Rating Scale were assessed before and after 8 weeks of physical therapy program. Patients completed a global rating of change scale at the end of therapy. The standardized effect size, Guyatt responsiveness index, and the minimum clinical important difference were calculated. Standardized effect size of the Activity of Daily Living Scale was 0.63, Guyatt responsiveness index was 1.4, area under the curve was 0.83 (95% confidence interval: 0.72, 0.94), and the minimum clinical important difference corresponded to an increase of 7.1 percentile points. Standardized effect size of the Numeric Pain Rating Scale was 0.72, Guyatt responsiveness index was 2.2, area under the curve was 0.80 (95% confidence interval: 0.70, 0.92), and the minimum clinical important difference corresponded to a decrease of 1.16 points. Information from this study may be helpful to therapists when evaluating the effectiveness of rehabilitation intervention on physical function and pain, and to power future clinical trials on patients with patellofemoral pain.

Electrical stimulation as a treatment intervention to improve function, edema or pain following acute lateral ankle sprains: A systematic review.

PubMed

Feger, Mark A; Goetschius, John; Love, Hailey; Saliba, Sue A; Hertel, Jay

2015-11-01

The purpose of this systematic review was to assess whether electrical stimulation (ES), when used in conjunction with a standard treatment, can reduce levels of functional impairment, edema, and pain compared to a standard treatment alone, in patients following a lateral ankle sprain. We searched PubMed, CINAHL, SportDiscus, and Medline (OVID) databases through June 2014 using the terms "ankle sprain or ankle sprains or ligament injury or ligamentous injury," and "electric stimulation or electric stimulation or electrotherapy." Our search identified four randomized control trials, of which, neuromuscular ES and high-voltage pulsed stimulation were the only two ES modalities utilized. Effect sizes and 95% confidence intervals (CI) were estimated using Cohen's d for comparison between treatment groups. Three of four effect sizes for function had 95% CI that crossed zero. Twenty-four of the thirty-two effect sizes for edema had 95% CI that crossed zero. All effect sizes for pain had 95% CI that crossed zero. Therefore, the use of ES is not recommended as a means to improve function, reduce edema, or decrease pain in the treatment of acute lateral ankle sprains. Copyright © 2015 Elsevier Ltd. All rights reserved.

First among Others? Cohen's "d" vs. Alternative Standardized Mean Group Difference Measures

ERIC Educational Resources Information Center

Cahan, Sorel; Gamliel, Eyal

2011-01-01

Standardized effect size measures typically employed in behavioral and social sciences research in the multi-group case (e.g., [eta][superscript 2], f[superscript 2]) evaluate between-group variability in terms of either total or within-group variability, such as variance or standard deviation--that is, measures of dispersion about the mean. In…

Improvements for Differential Functioning of Items and Tests (DFIT): Investigating the Addition of Reporting an Effect Size Measure and Power

ERIC Educational Resources Information Center

Wright, Keith D.

2011-01-01

Standardized testing has been part of the American educational system for decades. Controversy from the beginning has plagued standardized testing, is plaguing testing today, and will continue to be controversial. Given the current federal educational policies supporting increased standardized testing, psychometricians, educators and policy makers…

Seed-parent fecundity distributions in bee-pollinated forage legume polycrosses

USDA-ARS?s Scientific Manuscript database

Modeling expected fecundity distributions in bee-pollinated forage legume polycrosses allows more accurate assessment of effective polycross size and its inbreeding consequences. In this study, polycross size (N) standardized seed-parent fecundity frequencies [(Pfi – (1/N))/(1/N)] were modeled on 16...

Effectiveness of the Size Matters Handwriting Program.

PubMed

Pfeiffer, Beth; Rai, Gillian; Murray, Tammy; Brusilovskiy, Eugene

2015-04-01

The purpose of the research was to study changes in handwriting legibility among kindergarten, first- and second-grade students in response to the Size Matters curricular-based handwriting program. A two-group pre-post-test design was implemented at two public schools with half of the classrooms assigned to receive the Size Matters program and the other continuing to receive standard instruction. All participants completed two standardized handwriting measures at pre-test and after 40 instructional sessions were completed with the classes receiving the handwriting program. Results identified significant changes in legibility in the handwriting intervention group for all three grades when compared with the standard instruction group. The results of this study support the use of a curricular-embedded handwriting program and provide the foundation for future research examining the impact of handwriting legibility on learning outcomes.

77 FR 8020 - Semiannual Regulatory Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-13

... Size 3245-AG25 Standards for Utilities Industries. 463 Small Business Size 3245-AG26 Standards... Remediation Services Industries. 465 Small Business Size 3245-AG28 Standards: Real Estate, Rental and Leasing Industries. 466 Small Business Size 3245-AG29 Standards: Educational Services Industries. 467 Small Business...

AN ELECTRIFYING NEW SOLUTION TO AN OLD PROBLEM?

EPA Science Inventory

The adverse health effects of particles have been linked to many factors, including particle size. The U.S. Environmental Protection Agency (EPA) first issued National Ambient Air QualityStandards (NAAQS) for particular matter (PM) in 1971, amended the standards in 1987 for part...

The effect of covariate mean differences on the standard error and confidence interval for the comparison of treatment means.

PubMed

Liu, Xiaofeng Steven

2011-05-01

The use of covariates is commonly believed to reduce the unexplained error variance and the standard error for the comparison of treatment means, but the reduction in the standard error is neither guaranteed nor uniform over different sample sizes. The covariate mean differences between the treatment conditions can inflate the standard error of the covariate-adjusted mean difference and can actually produce a larger standard error for the adjusted mean difference than that for the unadjusted mean difference. When the covariate observations are conceived of as randomly varying from one study to another, the covariate mean differences can be related to a Hotelling's T(2) . Using this Hotelling's T(2) statistic, one can always find a minimum sample size to achieve a high probability of reducing the standard error and confidence interval width for the adjusted mean difference. ©2010 The British Psychological Society.

Standard Sizes for Rough-Dimension Exports to Europe and Japan

Treesearch

Philip A. Araman

1987-01-01

In this article, European and Japanese standard-sized rough dimension products are described, and their apparent sizes are listed. One set of proposed standard sizes of rough dimension that could be manufactured in the United States for these markets is presented. Also, the benefits of the production and sale of standard sizes of export rough dimension are highlighted...

A New Method for Estimating the Effective Population Size from Allele Frequency Changes

PubMed Central

Pollak, Edward

1983-01-01

A new procedure is proposed for estimating the effective population size, given that information is available on changes in frequencies of the alleles at one or more independently segregating loci and the population is observed at two or more separate times. Approximate expressions are obtained for the variances of the new statistic, as well as others, also based on allele frequency changes, that have been discussed in the literature. This analysis indicates that the new statistic will generally have a smaller variance than the others. Estimates of effective population sizes and of the standard errors of the estimates are computed for data on two fly populations that have been discussed in earlier papers. In both cases, there is evidence that the effective population size is very much smaller than the minimum census size of the population. PMID:17246147

Effectiveness of various innovative learning methods in health science classrooms: a meta-analysis.

PubMed

Kalaian, Sema A; Kasim, Rafa M

2017-12-01

This study reports the results of a meta-analysis of the available literature on the effectiveness of various forms of innovative small-group learning methods on student achievement in undergraduate college health science classrooms. The results of the analysis revealed that most of the primary studies supported the effectiveness of the small-group learning methods in improving students' academic achievement with an overall weighted average effect-size of 0.59 in standard deviation units favoring small-group learning methods. The subgroup analysis showed that the various forms of innovative and reform-based small-group learning interventions appeared to be significantly more effective for students in higher levels of college classes (sophomore, junior, and senior levels), students in other countries (non-U.S.) worldwide, students in groups of four or less, and students who choose their own group. The random-effects meta-regression results revealed that the effect sizes were influenced significantly by the instructional duration of the primary studies. This means that studies with longer hours of instruction yielded higher effect sizes and on average every 1 h increase in instruction, the predicted increase in effect size was 0.009 standard deviation units, which is considered as a small effect. These results may help health science and nursing educators by providing guidance in identifying the conditions under which various forms of innovative small-group learning pedagogies are collectively more effective than the traditional lecture-based teaching instruction.

48 CFR 926.7004 - Size standard for Energy Policy Act procurements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Size standard for Energy... ENERGY SOCIOECONOMIC PROGRAMS OTHER SOCIOECONOMIC PROGRAMS Implementation of Section 3021 of the Energy Policy Act of 1992 926.7004 Size standard for Energy Policy Act procurements. The size standard for...

48 CFR 926.7004 - Size standard for Energy Policy Act procurements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Size standard for Energy... ENERGY SOCIOECONOMIC PROGRAMS OTHER SOCIOECONOMIC PROGRAMS Implementation of Section 3021 of the Energy Policy Act of 1992 926.7004 Size standard for Energy Policy Act procurements. The size standard for...

48 CFR 926.7004 - Size standard for Energy Policy Act procurements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Size standard for Energy... ENERGY SOCIOECONOMIC PROGRAMS OTHER SOCIOECONOMIC PROGRAMS Implementation of Section 3021 of the Energy Policy Act of 1992 926.7004 Size standard for Energy Policy Act procurements. The size standard for...

48 CFR 926.7004 - Size standard for Energy Policy Act procurements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Size standard for Energy... ENERGY SOCIOECONOMIC PROGRAMS OTHER SOCIOECONOMIC PROGRAMS Implementation of Section 3021 of the Energy Policy Act of 1992 926.7004 Size standard for Energy Policy Act procurements. The size standard for...

The dose from Compton backscatter screening.

PubMed

Rez, Peter; Metzger, Robert L; Mossman, Kenneth L

2011-04-01

Systems based on the detection of Compton backscattered X rays have been deployed for screening personnel for weapons and explosives. Similar principles are used for screening vehicles at border-crossing points. Based on well-established scattering cross sections and absorption coefficients in conjunction with reasonable estimates of the image contrast and resolution, the entrance skin dose and the dose at a depth of 1 cm can be calculated. The effective dose can be estimated using the same conversion coefficients as used to convert exposure measurements to the effective dose. It is shown that the effective dose is highly dependent on image resolution (i.e. pixel size).The effective doses for personnel screening systems are unlikely to be in compliance with the American National Standards Institute standard NS 43.17 unless the pixel sizes are >4 mm. Nevertheless, calculated effective doses are well below doses associated with health effects.

Confidence Interval Coverage for Cohen's Effect Size Statistic

ERIC Educational Resources Information Center

Algina, James; Keselman, H. J.; Penfield, Randall D.

2006-01-01

Kelley compared three methods for setting a confidence interval (CI) around Cohen's standardized mean difference statistic: the noncentral-"t"-based, percentile (PERC) bootstrap, and biased-corrected and accelerated (BCA) bootstrap methods under three conditions of nonnormality, eight cases of sample size, and six cases of population…

Variability in the Results of Meta-Analysis as a Function of Comparing Effect Sizes Based on Scores from Noncomparable Measures: A Simulation Study

ERIC Educational Resources Information Center

Nugent, William R.

2017-01-01

Meta-analysis is a significant methodological advance that is increasingly important in research synthesis. Fundamental to meta-analysis is the presumption that effect sizes, such as the standardized mean difference (SMD), based on scores from different measures are comparable. It has been argued that population observed score SMDs based on scores…

A Meta-Analysis of Gender Differences in Terms of Teacher Views on the Instructional Leadership Behavior of Principals

ERIC Educational Resources Information Center

Kis, Ali; Konan, Necdet

2014-01-01

The main aim of this study was to gather teachers' views to determine the effect size of gender differences on the instructional leadership behavior of school principals. The standardized mean difference (SMD) was calculated to measure the effect size in this study. An initial search yielded 126 studies on the research topic, which consists…

Standard-Size Blanks for Furniture and Cabinets

Treesearch

Philip A. Araman

1983-01-01

Blanks are rough-dimension parts of a specific size which may be solid or glued up; quality depends on the final use of the material. Standard-size blanks are blanks made to standard thicknesses, lengths, and widths for each desired quality. Blanks in a few standard sizes can be used to make the thousands of different size rough-dimension parts needed by a furniture or...

Standard Methods for Unnotched Tension Testing of Textile Composites

NASA Technical Reports Server (NTRS)

Portanova, M. A.

1995-01-01

An investigation was conducted by researchers at the Boeing Defense & Space Group to investigate the effects of specimen sizing on several braided textile materials. Test results from this and other test programs were compared in an effort to determine what effect, if any, specimen size has on elastic property measurements of unnotched tension test. In general, the unnotched tensile strength of 2-D braids was found to be insensitive to specimen width, length, or thickness effects. The results from this study suggest that standard testing methods used for tape materials may be sufficient for tension testing of textile composite materials. Specifically, the straight sided specimen geometry described in ASTM 3034, and used by Boeing, should provide acceptable results. Further experiments performed at Boeing and by other investigators on other textile architectures suggest similar results. Although specimen size studies were not conducted, failing stresses varied on the same order as those obtained with the 2-D materials. This suggests that the accuracy of the results were consistent with those obtained with the 2-D materials.

Estimation of Tooth Size Discrepancies among Different Malocclusion Groups

PubMed Central

Bala, Madhu; Goyal, Virender

2014-01-01

ABSTRACT Regards and Tribute: Late Dr Narender Hasija was a mentor and visionary in the light of knowledge and experience. We pay our regards with deepest gratitude to the departed soul to rest in peace. Bolton’s ratios help in estimating overbite, overjet relationships, the effects of contemplated extractions on posterior occlusion, incisor relationships and identification of occlusal misfit produced by tooth size discrepancies. Aim: To determine any difference in tooth size discrepancy in anterior as well as overall ratio in different malocclusions and comparison with Bolton’s study. Materials and methods: After measuring the teeth on all 100 patients, Bolton’s analysis was performed. Results were compared with Bolton’s means and standard deviations. The results were also subjected to statistical analysis. Results show that the mean and standard deviations of ideal occlusion cases are comparable with those Bolton but, when the mean and standard deviation of malocclusion groups are compared with those of Bolton, the values of standard deviation are higher, though the mean is comparable. How to cite this article: Hasija N, Bala M, Goyal V. Estimation of Tooth Size Discrepancies among Different Malocclusion Groups. Int J Clin Pediatr Dent 2014;7(2):82-85. PMID:25356005

Sustainable Sizing.

PubMed

Robinette, Kathleen M; Veitch, Daisy

2016-08-01

To provide a review of sustainable sizing practices that reduce waste, increase sales, and simultaneously produce safer, better fitting, accommodating products. Sustainable sizing involves a set of methods good for both the environment (sustainable environment) and business (sustainable business). Sustainable sizing methods reduce (1) materials used, (2) the number of sizes or adjustments, and (3) the amount of product unsold or marked down for sale. This reduces waste and cost. The methods can also increase sales by fitting more people in the target market and produce happier, loyal customers with better fitting products. This is a mini-review of methods that result in more sustainable sizing practices. It also reviews and contrasts current statistical and modeling practices that lead to poor fit and sizing. Fit-mapping and the use of cases are two excellent methods suited for creating sustainable sizing, when real people (vs. virtual people) are used. These methods are described and reviewed. Evidence presented supports the view that virtual fitting with simulated people and products is not yet effective. Fit-mapping and cases with real people and actual products result in good design and products that are fit for person, fit for purpose, with good accommodation and comfortable, optimized sizing. While virtual models have been shown to be ineffective for predicting or representing fit, there is an opportunity to improve them by adding fit-mapping data to the models. This will require saving fit data, product data, anthropometry, and demographics in a standardized manner. For this success to extend to the wider design community, the development of a standardized method of data collection for fit-mapping with a globally shared fit-map database is needed. It will enable the world community to build knowledge of fit and accommodation and generate effective virtual fitting for the future. A standardized method of data collection that tests products' fit methodically and quantitatively will increase our predictive power to determine fit and accommodation, thereby facilitating improved, effective design. These methods apply to all products people wear, use, or occupy. © 2016, Human Factors and Ergonomics Society.

77 FR 22564 - Proposed Collection; Comment Request; Safety Standards for Full-Size Baby Cribs and Non-Full-Size...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-16

... child care centers' compliance with the recent CPSC safety standards for full-size and non-full-size... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0019] Proposed Collection; Comment Request; Safety Standards for Full- Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY...

Does ease mediate the ease-of-retrieval effect? A meta-analysis.

PubMed

Weingarten, Evan; Hutchinson, J Wesley

2018-03-01

A wealth of literature suggests individuals use feelings in addition to facts as sources of information for judgment. This paper focuses on a manipulation in which participants list either a few or many examples of a given type, and then make a judgment. Instead of using the number of arguments or evidence strength, participants are hypothesized to use the subjective ease of generating examples as the primary input to judgment. This result is commonly called the ease-of-retrieval effect , and the feeling of ease is typically assumed to mediate the effect. We use meta-analytic methods across 142 papers, 263 studies, and 582 effect sizes to assess the robustness of the ease-of-retrieval effect, and whether or not the effect is mediated by subjective ease. On average, the standard few-versus-many manipulation exhibits a medium-sized effect. In experimental conditions designed to replicate the standard effect, about a third to half of the total effect is mediated by subjective ease. This supports the standard explanation, but suggests that other mediators are present. Further, we find evidence of publication bias that reduces the standard effect by up to 1 third. We also find that (a) moderator manipulations that differ from the standard manipulation lead to smaller, often reversed effects that are not as strongly mediated by ease, (b) several manipulations of theory-based moderators (e.g., polarized attitudes, misattribution) yield strong theory-consistent effects, (c) method-based moderators have little or no effects on the results, and (d) the mediation results are robust with respect to assumptions about error structure. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

78 FR 45051 - Small Business Size Standards; Support Activities for Mining; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-26

... Federal Register on June 20, 2013 (78 FR 37404). The document amended SBA's Small Business Size... of Federal Regulations. DATES: Effective July 22, 2013. FOR FURTHER INFORMATION CONTACT: Khem Sharma..., DC 20416. SUPPLEMENTARY INFORMATION: In FR Doc. 2013-14712 appearing on page 37404 in the June 20...

Effects of nitrogen and planting seed size on cotton growth, development, and yield

USDA-ARS?s Scientific Manuscript database

A standardized experiment was conducted during 2009 and 2010 at 20 location-years across U.S. cotton (Gossypium hirsutum L.)-producing states to compare the N use requirement of contemporary cotton cultivars based on their planting seed size. Treatments consisted of three cotton varieties with plant...

13 CFR 121.301 - What size standards are applicable to financial assistance programs?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false What size standards are applicable to financial assistance programs? 121.301 Section 121.301 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Size...

13 CFR 121.301 - What size standards are applicable to financial assistance programs?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What size standards are applicable to financial assistance programs? 121.301 Section 121.301 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Size...

The Effective Dynamic Ranges for Glaucomatous Visual Field Progression With Standard Automated Perimetry and Stimulus Sizes III and V

PubMed Central

Zamba, Gideon K. D.; Artes, Paul H.

2018-01-01

Purpose It has been shown that threshold estimates below approximately 20 dB have little effect on the ability to detect visual field progression in glaucoma. We aimed to compare stimulus size V to stimulus size III, in areas of visual damage, to confirm these findings by using (1) a different dataset, (2) different techniques of progression analysis, and (3) an analysis to evaluate the effect of censoring on mean deviation (MD). Methods In the Iowa Variability in Perimetry Study, 120 glaucoma subjects were tested every 6 months for 4 years with size III SITA Standard and size V Full Threshold. Progression was determined with three complementary techniques: pointwise linear regression (PLR), permutation of PLR, and linear regression of the MD index. All analyses were repeated on “censored'' datasets in which threshold estimates below a given criterion value were set to equal the criterion value. Results Our analyses confirmed previous observations that threshold estimates below 20 dB contribute much less to visual field progression than estimates above this range. These findings were broadly similar with stimulus sizes III and V. Conclusions Censoring of threshold values < 20 dB has relatively little impact on the rates of visual field progression in patients with mild to moderate glaucoma. Size V, which has lower retest variability, performs at least as well as size III for longitudinal glaucoma progression analysis and appears to have a larger useful dynamic range owing to the upper sensitivity limit being higher. PMID:29356822

Finite-size corrections to the excitation energy transfer in a massless scalar interaction model

NASA Astrophysics Data System (ADS)

Maeda, Nobuki; Yabuki, Tetsuo; Tobita, Yutaka; Ishikawa, Kenzo

2017-05-01

We study the excitation energy transfer (EET) for a simple model in which a massless scalar particle is exchanged between two molecules. We show that a finite-size effect appears in EET by the interaction energy due to overlapping of the quantum waves in a short time interval. The effect generates finite-size corrections to Fermi's golden rule and modifies EET probability from the standard formula in the Förster mechanism. The correction terms come from transition modes outside the resonance energy region and enhance EET probability substantially.

EFFECT OF RADIATION DOSE LEVEL ON ACCURACY AND PRECISION OF MANUAL SIZE MEASUREMENTS IN CHEST TOMOSYNTHESIS EVALUATED USING SIMULATED PULMONARY NODULES

PubMed Central

Söderman, Christina; Johnsson, Åse Allansdotter; Vikgren, Jenny; Norrlund, Rauni Rossi; Molnar, David; Svalkvist, Angelica; Månsson, Lars Gunnar; Båth, Magnus

2016-01-01

The aim of the present study was to investigate the dependency of the accuracy and precision of nodule diameter measurements on the radiation dose level in chest tomosynthesis. Artificial ellipsoid-shaped nodules with known dimensions were inserted in clinical chest tomosynthesis images. Noise was added to the images in order to simulate radiation dose levels corresponding to effective doses for a standard-sized patient of 0.06 and 0.04 mSv. These levels were compared with the original dose level, corresponding to an effective dose of 0.12 mSv for a standard-sized patient. Four thoracic radiologists measured the longest diameter of the nodules. The study was restricted to nodules located in high-dose areas of the tomosynthesis projection radiographs. A significant decrease of the measurement accuracy and intraobserver variability was seen for the lowest dose level for a subset of the observers. No significant effect of dose level on the interobserver variability was found. The number of non-measurable small nodules (≤5 mm) was higher for the two lowest dose levels compared with the original dose level. In conclusion, for pulmonary nodules at positions in the lung corresponding to locations in high-dose areas of the projection radiographs, using a radiation dose level resulting in an effective dose of 0.06 mSv to a standard-sized patient may be possible in chest tomosynthesis without affecting the accuracy and precision of nodule diameter measurements to any large extent. However, an increasing number of non-measurable small nodules (≤5 mm) with decreasing radiation dose may raise some concerns regarding an applied general dose reduction for chest tomosynthesis examinations in the clinical praxis. PMID:26994093

EFFECT OF RADIATION DOSE LEVEL ON ACCURACY AND PRECISION OF MANUAL SIZE MEASUREMENTS IN CHEST TOMOSYNTHESIS EVALUATED USING SIMULATED PULMONARY NODULES.

PubMed

Söderman, Christina; Johnsson, Åse Allansdotter; Vikgren, Jenny; Norrlund, Rauni Rossi; Molnar, David; Svalkvist, Angelica; Månsson, Lars Gunnar; Båth, Magnus

2016-06-01

The aim of the present study was to investigate the dependency of the accuracy and precision of nodule diameter measurements on the radiation dose level in chest tomosynthesis. Artificial ellipsoid-shaped nodules with known dimensions were inserted in clinical chest tomosynthesis images. Noise was added to the images in order to simulate radiation dose levels corresponding to effective doses for a standard-sized patient of 0.06 and 0.04 mSv. These levels were compared with the original dose level, corresponding to an effective dose of 0.12 mSv for a standard-sized patient. Four thoracic radiologists measured the longest diameter of the nodules. The study was restricted to nodules located in high-dose areas of the tomosynthesis projection radiographs. A significant decrease of the measurement accuracy and intraobserver variability was seen for the lowest dose level for a subset of the observers. No significant effect of dose level on the interobserver variability was found. The number of non-measurable small nodules (≤5 mm) was higher for the two lowest dose levels compared with the original dose level. In conclusion, for pulmonary nodules at positions in the lung corresponding to locations in high-dose areas of the projection radiographs, using a radiation dose level resulting in an effective dose of 0.06 mSv to a standard-sized patient may be possible in chest tomosynthesis without affecting the accuracy and precision of nodule diameter measurements to any large extent. However, an increasing number of non-measurable small nodules (≤5 mm) with decreasing radiation dose may raise some concerns regarding an applied general dose reduction for chest tomosynthesis examinations in the clinical praxis. © The Author 2016. Published by Oxford University Press.

Recovery of function following hip resurfacing arthroplasty: a randomized controlled trial comparing an accelerated versus standard physiotherapy rehabilitation programme.

PubMed

Barker, Karen L; Newman, Meredith A; Hughes, Tamsin; Sackley, Cath; Pandit, Hemant; Kiran, Amit; Murray, David W

2013-09-01

To identify if a tailored rehabilitation programme is more effective than standard practice at improving function in patients undergoing metal-on-metal hip resurfacing arthroplasty. Randomized controlled trial. Specialist orthopaedic hospital. 80 men with a median age of 56 years. Tailored post-operative physiotherapy programme compared with standard physiotherapy. Primary outcome - Oxford Hip Score (OHS), Secondary outcomes: Hip disability and Osteoarthritis Outcome Score (HOOS), EuroQol (EQ-5D-3L) and UCLA activity score. Hip range of motion, hip muscle strength and patient selected goals were also assessed. At one year the mean (SD) Oxford Hip Score of the intervention group was higher, 45.1 (5.3), than the control group, 39.6 (8.8). This was supported by a linear regression model, which detected a 5.8 unit change in Oxford Hip Score (p < 0.001), effect size 0.76. There was a statistically significant increase in Hip disability and Osteoarthritis Outcome Score of 12.4% (p < 0.0005), effect size 0.76; UCLA activity score differed by 0.66 points (p < 0.019), effect size 0.43; EQ 5D showed an improvement of 0.85 (p < 0.0005), effect size 0.76. A total of 80% (32 of 40) of the intervention group fully met their self-selected goal compared with 55% (22 of 40) of the control group. Hip range of motion increased significantly; hip flexion by a mean difference 17.9 degrees (p < 0.0005), hip extension by 5.7 degrees (p < 0.004) and abduction by 4 degrees (p < 0.05). Muscle strength improved more in the intervention group but was not statistically significant. A tailored physiotherapy programme improved self-reported functional outcomes and hip range of motion in patients undergoing hip resurfacing.

77 FR 11001 - Small Business Size Standards: Health Care and Social Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... the changes in the Federal contracting marketplace and industry structure. The last time SBA conducted... size standards at one time, SBA is reviewing size standards on a Sector by Sector basis. A NAICS Sector... nonmanufacturer rule. See 13 CFR 121.406(b). These long-standing anchor size standards have stood the test of time...

75 FR 43107 - Full-Size and Non-Full Size Baby Cribs: Withdrawal of Advance Notice of Proposed Rulemaking

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

... worked with the voluntary standards group, ASTM International (formerly known as the American Society for Testing and Materials), which added provisions in its standard for full-size baby cribs, ASTM F 1169, to... the same as voluntary standards ASTM F 1169-10, Standard Consumer Safety Specification for Full-Size...

Effects of nano-SiO(2) and different ash particle sizes on sludge ash-cement mortar.

PubMed

Lin, K L; Chang, W C; Lin, D F; Luo, H L; Tsai, M C

2008-09-01

The effects of nano-SiO(2) on three ash particle sizes in mortar were studied by replacing a portion of the cement with incinerated sewage sludge ash. Results indicate that the amount of water needed at standard consistency increased as more nano-SiO(2) was added. Moreover, a reduction in setting time became noticeable for smaller ash particle sizes. The compressive strength of the ash-cement mortar increased as more nano-SiO(2) was added. Additionally, with 2% nano-SiO(2) added and a cure length of 7 days, the compressive strength of the ash-cement mortar with 1 microm ash particle size was about 1.5 times better that of 75microm particle size. Further, nano-SiO(2) functioned to fill pores for ash-cement mortar with different ash particle sizes. However, the effects of this pore-filling varied with ash particle size. Higher amounts of nano-SiO(2) better influenced the ash-cement mortar with larger ash particle sizes.

Evaluating the Contribution of Different Item Features to the Effect Size of the Gender Difference in Three-Dimensional Mental Rotation Using Automatic Item Generation

ERIC Educational Resources Information Center

Arendasy, Martin E.; Sommer, Markus

2010-01-01

In complex three-dimensional mental rotation tasks males have been reported to score up to one standard deviation higher than females. However, this effect size estimate could be compromised by the presence of gender bias at the item level, which calls the validity of purely quantitative performance comparisons into question. We hypothesized that…

Experiments with central-limit properties of spatial samples from locally covariant random fields

USGS Publications Warehouse

Barringer, T.H.; Smith, T.E.

1992-01-01

When spatial samples are statistically dependent, the classical estimator of sample-mean standard deviation is well known to be inconsistent. For locally dependent samples, however, consistent estimators of sample-mean standard deviation can be constructed. The present paper investigates the sampling properties of one such estimator, designated as the tau estimator of sample-mean standard deviation. In particular, the asymptotic normality properties of standardized sample means based on tau estimators are studied in terms of computer experiments with simulated sample-mean distributions. The effects of both sample size and dependency levels among samples are examined for various value of tau (denoting the size of the spatial kernel for the estimator). The results suggest that even for small degrees of spatial dependency, the tau estimator exhibits significantly stronger normality properties than does the classical estimator of standardized sample means. ?? 1992.

Higher convection volume exchange with online hemodiafiltration is associated with survival advantage for dialysis patients: the effect of adjustment for body size.

PubMed

Davenport, Andrew; Peters, Sanne A E; Bots, Michiel L; Canaud, Bernard; Grooteman, Muriel P C; Asci, Gulay; Locatelli, Francesco; Maduell, Francisco; Morena, Marion; Nubé, Menso J; Ok, Ercan; Torres, Ferran; Woodward, Mark; Blankestijn, Peter J

2016-01-01

Mortality remains high for hemodialysis patients. Online hemodiafiltration (OL-HDF) removes more middle-sized uremic toxins but outcomes of individual trials comparing OL-HDF with hemodialysis have been discrepant. Secondary analyses reported higher convective volumes, easier to achieve in larger patients, and improved survival. Here we tested different methods to standardize OL-HDF convection volume on all-cause and cardiovascular mortality compared with hemodialysis. Pooled individual patient analysis of four prospective trials compared thirds of delivered convection volume with hemodialysis. Convection volumes were either not standardized or standardized to weight, body mass index, body surface area, and total body water. Data were analyzed by multivariable Cox proportional hazards modeling from 2793 patients. All-cause mortality was reduced when the convective dose was unstandardized or standardized to body surface area and total body water; hazard ratio (95% confidence intervals) of 0.65 (0.51-0.82), 0.74 (0.58-0.93), and 0.71 (0.56-0.93) for those receiving higher convective doses. Standardization by body weight or body mass index gave no significant survival advantage. Higher convection volumes were generally associated with greater survival benefit with OL-HDF, but results varied across different ways of standardization for body size. Thus, further studies should take body size into account when evaluating the impact of delivered convection volume on mortality end points. Copyright © 2015 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.

Caution regarding the choice of standard deviations to guide sample size calculations in clinical trials.

PubMed

Chen, Henian; Zhang, Nanhua; Lu, Xiaosun; Chen, Sophie

2013-08-01

The method used to determine choice of standard deviation (SD) is inadequately reported in clinical trials. Underestimations of the population SD may result in underpowered clinical trials. This study demonstrates how using the wrong method to determine population SD can lead to inaccurate sample sizes and underpowered studies, and offers recommendations to maximize the likelihood of achieving adequate statistical power. We review the practice of reporting sample size and its effect on the power of trials published in major journals. Simulated clinical trials were used to compare the effects of different methods of determining SD on power and sample size calculations. Prior to 1996, sample size calculations were reported in just 1%-42% of clinical trials. This proportion increased from 38% to 54% after the initial Consolidated Standards of Reporting Trials (CONSORT) was published in 1996, and from 64% to 95% after the revised CONSORT was published in 2001. Nevertheless, underpowered clinical trials are still common. Our simulated data showed that all minimal and 25th-percentile SDs fell below 44 (the population SD), regardless of sample size (from 5 to 50). For sample sizes 5 and 50, the minimum sample SDs underestimated the population SD by 90.7% and 29.3%, respectively. If only one sample was available, there was less than 50% chance that the actual power equaled or exceeded the planned power of 80% for detecting a median effect size (Cohen's d = 0.5) when using the sample SD to calculate the sample size. The proportions of studies with actual power of at least 80% were about 95%, 90%, 85%, and 80% when we used the larger SD, 80% upper confidence limit (UCL) of SD, 70% UCL of SD, and 60% UCL of SD to calculate the sample size, respectively. When more than one sample was available, the weighted average SD resulted in about 50% of trials being underpowered; the proportion of trials with power of 80% increased from 90% to 100% when the 75th percentile and the maximum SD from 10 samples were used. Greater sample size is needed to achieve a higher proportion of studies having actual power of 80%. This study only addressed sample size calculation for continuous outcome variables. We recommend using the 60% UCL of SD, maximum SD, 80th-percentile SD, and 75th-percentile SD to calculate sample size when 1 or 2 samples, 3 samples, 4-5 samples, and more than 5 samples of data are available, respectively. Using the sample SD or average SD to calculate sample size should be avoided.

The effect of design modifications to the typographical layout of the New York State elementary science learning standards on user preference and process time

NASA Astrophysics Data System (ADS)

Arnold, Jeffery E.

The purpose of this study was to determine the effect of four different design layouts of the New York State elementary science learning standards on user processing time and preference. Three newly developed layouts contained the same information as the standards core curriculum. In this study, the layout of the core guide is referred to as Book. The layouts of the new documents are referred to as Chart, Map, and Tabloid based on the format used to convey content hierarchy information. Most notably, all the new layouts feature larger page sizes, color, page tabs, and an icon based navigation system (IBNS). A convenience sample of 48 New York State educators representing three educator types (16 pre-service teachers, 16 in-service teachers, and 16 administrators) participated in the study. After completing timed tasks accurately, participants scored each layout based on preference. Educator type and layout were the independent variables, and process time and user preference were the dependent variables. A two-factor experimental design with Educator Type as the between variable and with repeated measures on Layout, the within variable, showed a significant difference in process time for Educator Type and Layout. The main effect for Educator Type (F(2, 45) = 8.03, p <.001) was significant with an observed power of .94, and an effect size of .26. The pair-wise comparisons for process time showed that pre-service teachers (p = .02) and administrators (p =.009) completed the assigned tasks more quickly when compared to in-service teachers. The main effect for Layout (F(3, 135) = 4.47, p =.01) was also significant with an observed power of .80, and an effect size of .09. Pair-wise comparisons showed that the newly developed Chart (p = .019) and Map (p = .032) layouts reduced overall process time when compared to the existing state learning standards (Book). The Layout X Educator type interaction was not significant. The same two-factor experimental design on preference, showed the main effect for Layout (F(3, 135) = 28.43, p =.001) was significant. The observed power was 1.0, with an effect size of .39. Pair-wise comparisons for preference scores showed that the Chart (p = .001), Map (p = .001), and Tabloid (p = .001) were preferred over the Book layout. The Layout Type X Educator Type interaction and the main effect for Educator Type were not significant. This study provides evidence that the newly developed design layouts improve usability (as measured by process time and preference scores) of the New York State elementary science learning standard documents. Features in the new layout design, such as the IBNS, may provide a foundation for a visual language and aid users in navigating standard documents across grade level and subject areas. Implications for the next generation of standard documents are presented.

78 FR 37409 - Small Business Size Standards: Finance and Insurance and Management of Companies and Enterprises

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

...The U.S. Small Business Administration (SBA) is increasing small business size standards for 36 industries in North American Industry Classification System (NAICS) Sector 52, Finance and Insurance, and for two industries in NAICS Sector 55, Management of Companies and Enterprises. In addition, SBA is changing the basis for measuring size from assets to annual receipts for one industry in NAICS Sector 52, namely, NAICS 522293, International Trade Financing. Finally, SBA is deleting NAICS 525930, Real Estate Investment Trusts, from its table of size standards. The U.S. Office of Management and Budget (OMB) included the financial activities formerly included in NAICS 525930 in NAICS 531110, NAICS 531120, NAICS 531130, NAICS 531190, and NAICS 525990. As part of its ongoing comprehensive size standards review, SBA evaluated all receipts based and assets based size standards in NAICS Sectors 52 and 55 to determine whether they should be retained or revised. SBA did not review the 1,500-employee size standard for NAICS 524126, Direct Property and Casualty Insurance Carriers, which it will review in the near future with other employee based size standards. This final rule is one of a series of final rules that will review size standards of industries grouped by NAICS Sectors.

Effects of plant size, temperature, and light intensity on flowering of Phalaenopsis hybrids in Mediterranean greenhouses.

PubMed

Paradiso, Roberta; De Pascale, Stefania

2014-01-01

Mediterranean greenhouses for cultivation of Phalaenopsis orchids reproduce the warm, humid, and shaded environment of tropical underbrush. Heating represents the highest production cost, due to the high thermal requirements and the long unproductive phase of juvenility, in which plants attain the critical size for flowering. Our researches aimed to investigate the effect of plant size, temperature, and light intensity, during the phase of flower induction, on flowering of modern genotypes selected for Mediterranean greenhouses. Three experiments were carried out to compare (i) plant size: reduced size versus size considered optimal for flowering (hybrids "Sogo Yukidian," "Chain Xen Diamond," and "Pinlong"); (ii) temperature: moderate reduction of temperature versus standard thermal regime (hybrid "Premium"); (iii) light intensity: supplemental lighting versus reference light intensity (hybrid "Premium"). The premature exposure of plants to the inductive treatment delayed the beginning of flowering and reduced the flower stem quality, in all the tested hybrids. In "Premium," the lower temperature did not affect flowering earliness and commercial quality of flower stems compared to the standard regime, whereas it promoted stem branching. In the same hybrid, supplemental lighting anticipated flowering and promoted the emission of the second stem and the stem branching, compared to the reference light regime.

The effects of particle size on the optical properties and surface roughness of a glass-balloon-filled black paint

NASA Technical Reports Server (NTRS)

Heslin, T.; Heaney, J.; Harper, M.

1974-01-01

The effects of particle size on the optical properties and surface roughness of a glass-balloon-filled, carbon-pigmented paint were studied in order to develop a diffuse-reflecting, low-total-reflectance, low-outgassing black paint. Particle sizes ranged between 20 microns and 74 microns. Surface roughness was found to increase with increasing particle size. Relative total reflectance at near-normal incidence (MgO standard) of the filled paints was less than for the unfilled paint between 230 nm and 1800 nm. Total absolute reflectance at 546 nm decreased with increasing particle size at grazing angles of incidence. Near-normal, total emittance was greater for the filled paints than for the unfilled paint. Specularity decreased with increasing particle size over the range studied.

Teaching Algebra to Students With Learning Disabilities: Where Have We Come and Where Should We Go?

PubMed

Watt, Sarah J; Watkins, Jessie R; Abbitt, Jason

2016-07-01

This review investigates effective interventions for teaching algebra to students with learning disabilities and evaluates the complexity and alignment of skills with the Common Core State Standards in math. The review includes the results of 10 experimental and 5 single-subject designs (N = 15) producing a moderate overall effect size (g = 0.48). A total of five interventions were identified and analyzed across the studies using effect size data. © Hammill Institute on Disabilities 2014.

13 CFR 121.509 - What is the size standard for leasing of Government land for coal mining?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What is the size standard for leasing of Government land for coal mining? 121.509 Section 121.509 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Size...

Improved Data Reporting in "RQES": From Volumes 49, 59, to 84

ERIC Educational Resources Information Center

Thomas, Jerry R.

2014-01-01

This commentary provides a review of changes in data reporting in "Research Quarterly for Exercise and Sport" from Volumes 49 and 59 to 84. Improvements were noted in that all articles reported means, standard deviations, and sample sizes, while most (87%) articles reported an estimate of effect size ("ES"). Additional…

Estimating Standardized Linear Contrasts of Means with Desired Precision

ERIC Educational Resources Information Center

Bonett, Douglas G.

2009-01-01

L. Wilkinson and the Task Force on Statistical Inference (1999) recommended reporting confidence intervals for measures of effect sizes. If the sample size is too small, the confidence interval may be too wide to provide meaningful information. Recently, K. Kelley and J. R. Rausch (2006) used an iterative approach to computer-generate tables of…

Is the standard SF-12 health survey valid and equivalent for a Chinese population?

PubMed

Lam, Cindy L K; Tse, Eileen Y Y; Gandek, Barbara

2005-03-01

Chinese is the world's largest ethnic group but few health-related quality of life (HRQoL) measures have been tested on them. The aim of this study was to determine if the standard SF-12 was valid and equivalent for a Chinese population. The SF-36 data of 2410 Chinese adults randomly selected from the general population of Hong Kong (HK) were analysed. The Chinese (HK) specific SF-12 items and scoring algorithm were derived from the HK Chinese population data by multiple regressions. The SF-36 PCS and MCS scores were used as criteria to assess the content and criterion validity of the SF-12. The standard and Chinese (HK) specific SF-12 PCS and MCS scores were compared for equivalence. The standard SF-12 explained 82% and 89% of the variance of the SF-36 PCS and MCS scores, respectively, and the effect size differences between the standard SF-36 and SF-12 scores were less than 0.3. Six of the Chinese (HK) specific SF-12 items were different from those of the standard SF-12, but the effect size differences between the Chinese (HK) specific and standard SF-12 scores were mostly less than 0.3. The standard SF-12 was valid and equivalent for the Chinese, which would enable more Chinese to be included in clinical trials that measure HRQoL.

The Effects of Different Standard Setting Methods and the Composition of Borderline Groups: A Study within a Law Curriculum

ERIC Educational Resources Information Center

Dochy, Filip; Kyndt, Eva; Baeten, Marlies; Pottier, Sofie; Veestraeten, Marlies; Leuven, K. U.

2009-01-01

The aim of this study was to examine the effect of different standard setting methods on the size and composition of the borderline group, on the discrimination between different types of students and on the types of students passing with one method but failing with another. A total of 107 university students were classified into 4 different types…

A log-normal distribution model for the molecular weight of aquatic fulvic acids

USGS Publications Warehouse

Cabaniss, S.E.; Zhou, Q.; Maurice, P.A.; Chin, Y.-P.; Aiken, G.R.

2000-01-01

The molecular weight of humic substances influences their proton and metal binding, organic pollutant partitioning, adsorption onto minerals and activated carbon, and behavior during water treatment. We propose a lognormal model for the molecular weight distribution in aquatic fulvic acids to provide a conceptual framework for studying these size effects. The normal curve mean and standard deviation are readily calculated from measured M(n) and M(w) and vary from 2.7 to 3 for the means and from 0.28 to 0.37 for the standard deviations for typical aquatic fulvic acids. The model is consistent with several types of molecular weight data, including the shapes of high- pressure size-exclusion chromatography (HP-SEC) peaks. Applications of the model to electrostatic interactions, pollutant solubilization, and adsorption are explored in illustrative calculations.The molecular weight of humic substances influences their proton and metal binding, organic pollutant partitioning, adsorption onto minerals and activated carbon, and behavior during water treatment. We propose a log-normal model for the molecular weight distribution in aquatic fulvic acids to provide a conceptual framework for studying these size effects. The normal curve mean and standard deviation are readily calculated from measured Mn and Mw and vary from 2.7 to 3 for the means and from 0.28 to 0.37 for the standard deviations for typical aquatic fulvic acids. The model is consistent with several type's of molecular weight data, including the shapes of high-pressure size-exclusion chromatography (HP-SEC) peaks. Applications of the model to electrostatic interactions, pollutant solubilization, and adsorption are explored in illustrative calculations.

The grain-size lineup: A test of a novel eyewitness identification procedure.

PubMed

Horry, Ruth; Brewer, Neil; Weber, Nathan

2016-04-01

When making a memorial judgment, respondents can regulate their accuracy by adjusting the precision, or grain size, of their responses. In many circumstances, coarse-grained responses are less informative, but more likely to be accurate, than fine-grained responses. This study describes a novel eyewitness identification procedure, the grain-size lineup, in which participants eliminated any number of individuals from the lineup, creating a choice set of variable size. A decision was considered to be fine-grained if no more than 1 individual was left in the choice set or coarse-grained if more than 1 individual was left in the choice set. Participants (N = 384) watched 2 high-quality or low-quality videotaped mock crimes and then completed 4 standard simultaneous lineups or 4 grain-size lineups (2 target-present and 2 target-absent). There was some evidence of strategic regulation of grain size, as the most difficult lineup was associated with a greater proportion of coarse-grained responses than the other lineups. However, the grain-size lineup did not outperform the standard simultaneous lineup. Fine-grained suspect identifications were no more diagnostic than suspect identifications from standard lineups, whereas coarse-grained suspect identifications carried little probative value. Participants were generally reluctant to provide coarse-grained responses, which may have hampered the utility of the procedure. For a grain-size approach to be useful, participants may need to be trained or instructed to use the coarse-grained option effectively. (c) 2016 APA, all rights reserved).

13 CFR 121.102 - How does SBA establish size standards?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false How does SBA establish size standards? 121.102 Section 121.102 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Provisions of General Applicability...

13 CFR 121.102 - How does SBA establish size standards?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false How does SBA establish size standards? 121.102 Section 121.102 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Provisions of General Applicability...

Meta-analyses of Theory use in Medication Adherence Intervention Research

PubMed Central

Conn, Vicki S.; Enriquez, Maithe; Ruppar, Todd M.; Chan, Keith C.

2016-01-01

Objective This systematic review applied meta-analytic procedures to integrate primary research that examined theory- or model-linked medication adherence interventions. Methods Extensive literature searching strategies were used to locate trials testing interventions with medication adherence behavior outcomes measured by electronic event monitoring, pharmacy refills, pill counts, and self-reports. Random-effects model analysis was used to calculate standardized mean difference effect sizes for medication adherence outcomes. Results Codable data were extracted from 146 comparisons with 19,348 participants. The most common theories and models were social cognitive theory and motivational interviewing. The overall weighted effect size for all interventions comparing treatment and control participants was 0.294. The effect size for interventions based on single-theories was 0.323 and for multiple-theory interventions was 0.214. Effect sizes for individual theories and models ranged from 0.041 to 0.447. The largest effect sizes were for interventions based on the health belief model (0.477) and adult learning theory (0.443). The smallest effect sizes were for interventions based on PRECEDE (0.041) and self-regulation (0.118). Conclusion These findings suggest that theory- and model-linked interventions have a significant but modest effect on medication adherence outcomes. PMID:26931748

76 FR 63216 - Small Business Size Standards: Information

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... all firms within an industry equally, regardless of their size. The weighted average overcomes that... companies, all else being equal, SBA will establish a size standard higher than the anchor size standard.... Concentration among firms is a measure of inequality of distribution. To evaluate the degree of inequality of...

77 FR 42197 - Small Business Size Standards: Construction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-18

... ``exception'') under NAICS 237990, Other Heavy and Civil Engineering Construction, from $20 million to $30... available on its Web site at www.sba.gov/size for public review and comments. The ``Size Standards... developing, reviewing, and modifying size standards when necessary. SBA published the document on its Web...

A Regression Framework for Effect Size Assessments in Longitudinal Modeling of Group Differences

PubMed Central

Feingold, Alan

2013-01-01

The use of growth modeling analysis (GMA)--particularly multilevel analysis and latent growth modeling--to test the significance of intervention effects has increased exponentially in prevention science, clinical psychology, and psychiatry over the past 15 years. Model-based effect sizes for differences in means between two independent groups in GMA can be expressed in the same metric (Cohen’s d) commonly used in classical analysis and meta-analysis. This article first reviews conceptual issues regarding calculation of d for findings from GMA and then introduces an integrative framework for effect size assessments that subsumes GMA. The new approach uses the structure of the linear regression model, from which effect sizes for findings from diverse cross-sectional and longitudinal analyses can be calculated with familiar statistics, such as the regression coefficient, the standard deviation of the dependent measure, and study duration. PMID:23956615

The effect of peer-group size on the delivery of feedback in basic life support refresher training: a cluster randomized controlled trial.

PubMed

Cho, Youngsuk; Je, Sangmo; Yoon, Yoo Sang; Roh, Hye Rin; Chang, Chulho; Kang, Hyunggoo; Lim, Taeho

2016-07-04

Students are largely providing feedback to one another when instructor facilitates peer feedback rather than teaching in group training. The number of students in a group affect the learning of students in the group training. We aimed to investigate whether a larger group size increases students' test scores on a post-training test with peer feedback facilitated by instructor after video-guided basic life support (BLS) refresher training. Students' one-rescuer adult BLS skills were assessed by a 2-min checklist-based test 1 year after the initial training. A cluster randomized controlled trial was conducted to evaluate the effect of student number in a group on BLS refresher training. Participants included 115 final-year medical students undergoing their emergency medicine clerkship. The median number of students was 8 in the large groups and 4 in the standard group. The primary outcome was to examine group differences in post-training test scores after video-guided BLS training. Secondary outcomes included the feedback time, number of feedback topics, and results of end-of-training evaluation questionnaires. Scores on the post-training test increased over three consecutive tests with instructor-led peer feedback, but not differ between large and standard groups. The feedback time was longer and number of feedback topics generated by students were higher in standard groups compared to large groups on the first and second tests. The end-of-training questionnaire revealed that the students in large groups preferred the smaller group size compared to their actual group size. In this BLS refresher training, the instructor-led group feedback increased the test score after tutorial video-guided BLS learning, irrespective of the group size. A smaller group size allowed more participations in peer feedback.

Logical and Methodological Issues Affecting Genetic Studies of Humans Reported in Top Neuroscience Journals.

PubMed

Grabitz, Clara R; Button, Katherine S; Munafò, Marcus R; Newbury, Dianne F; Pernet, Cyril R; Thompson, Paul A; Bishop, Dorothy V M

2018-01-01

Genetics and neuroscience are two areas of science that pose particular methodological problems because they involve detecting weak signals (i.e., small effects) in noisy data. In recent years, increasing numbers of studies have attempted to bridge these disciplines by looking for genetic factors associated with individual differences in behavior, cognition, and brain structure or function. However, different methodological approaches to guarding against false positives have evolved in the two disciplines. To explore methodological issues affecting neurogenetic studies, we conducted an in-depth analysis of 30 consecutive articles in 12 top neuroscience journals that reported on genetic associations in nonclinical human samples. It was often difficult to estimate effect sizes in neuroimaging paradigms. Where effect sizes could be calculated, the studies reporting the largest effect sizes tended to have two features: (i) they had the smallest samples and were generally underpowered to detect genetic effects, and (ii) they did not fully correct for multiple comparisons. Furthermore, only a minority of studies used statistical methods for multiple comparisons that took into account correlations between phenotypes or genotypes, and only nine studies included a replication sample or explicitly set out to replicate a prior finding. Finally, presentation of methodological information was not standardized and was often distributed across Methods sections and Supplementary Material, making it challenging to assemble basic information from many studies. Space limits imposed by journals could mean that highly complex statistical methods were described in only a superficial fashion. In summary, methods that have become standard in the genetics literature-stringent statistical standards, use of large samples, and replication of findings-are not always adopted when behavioral, cognitive, or neuroimaging phenotypes are used, leading to an increased risk of false-positive findings. Studies need to correct not just for the number of phenotypes collected but also for the number of genotypes examined, genetic models tested, and subsamples investigated. The field would benefit from more widespread use of methods that take into account correlations between the factors corrected for, such as spectral decomposition, or permutation approaches. Replication should become standard practice; this, together with the need for larger sample sizes, will entail greater emphasis on collaboration between research groups. We conclude with some specific suggestions for standardized reporting in this area.

Finite-size effects in Anderson localization of one-dimensional Bose-Einstein condensates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cestari, J. C. C.; Foerster, A.; Gusmao, M. A.

We investigate the disorder-induced localization transition in Bose-Einstein condensates for the Anderson and Aubry-Andre models in the noninteracting limit using exact diagonalization. We show that, in addition to the standard superfluid fraction, other tools such as the entanglement and fidelity can provide clear signatures of the transition. Interestingly, the fidelity exhibits good sensitivity even for small lattices. Effects of the system size on these quantities are analyzed in detail, including the determination of a finite-size-scaling law for the critical disorder strength in the case of the Anderson model.

Effect Size Calculations and Single Subject Designs

ERIC Educational Resources Information Center

Olive, Melissa L.; Smith, Benjamin W.

2005-01-01

This study compared visual analyses with five alternative methods for assessing the magnitude of effect with single subject designs. Each method was successful in detecting intervention effect. When rank ordered, each method was consistent in identifying the participants with the largest effect. We recommend the use of the standard mean difference…

Effect of growth ring orientation and placement of earlywood and latewood on MOE and MOR of very-small clear Douglas-fir beams.

Treesearch

Amy T. Grotta; Robert J. Leichti; Barbara L. Gartner; G.R. Johnson

2005-01-01

ASTM standard sizes for bending tests (either 50 x 50 mm or 25 x 25 mm in cross-section) are not always suitable for research purposes that characterize smaller sections of wood. Moreover, the ASTM standards specify loading the sample on the longitudinal-tangential surface. If specimens are small enough, then the effects of both growth-ring orientation and whether...

Effects on roughage inclusion and particle size on digestion and ruminal fermentation characteristics of beef steers

USDA-ARS?s Scientific Manuscript database

Roughage is fed to cattle to promote ruminal health and decrease digestive upset, but inclusion in finishing diets is limited due to the cost per unit of energy. Rumination behavior may be a means to standardize roughage in beef cattle finishing diets, and increasing particle size of roughage could ...

7 CFR 51.1438 - Size classifications for pieces.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS) United States Standards for Grades of Shelled Pecans Size Classifications § 51.1438 Size classifications for pieces. The size of pecan pieces in a lot may be specified in accordance with one of the size...

48 CFR 452.219-70 - Size Standard and NAICS Code Information.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Size Standard and NAICS Code Information. 452.219-70 Section 452.219-70 Federal Acquisition Regulations System DEPARTMENT OF... System Code(s) and business size standard(s) describing the products and/or services to be acquired under...

SNPmplexViewer--toward a cost-effective traceability system

PubMed Central

2011-01-01

Background Beef traceability has become mandatory in many regions of the world and is typically achieved through the use of unique numerical codes on ear tags and animal passports. DNA-based traceability uses the animal's own DNA code to identify it and the products derived from it. Using SNaPshot, a primer-extension-based method, a multiplex of 25 SNPs in a single reaction has been practiced for reducing the expense of genotyping a panel of SNPs useful for identity control. Findings To further decrease SNaPshot's cost, we introduced the Perl script SNPmplexViewer, which facilitates the analysis of trace files for reactions performed without the use of fluorescent size standards. SNPmplexViewer automatically aligns reference and target trace electropherograms, run with and without fluorescent size standards, respectively. SNPmplexViewer produces a modified target trace file containing a normalised trace in which the reference size standards are embedded. SNPmplexViewer also outputs aligned images of the two electropherograms together with a difference profile. Conclusions Modified trace files generated by SNPmplexViewer enable genotyping of SnaPshot reactions performed without fluorescent size standards, using common fragment-sizing software packages. SNPmplexViewer's normalised output may also improve the genotyping software's performance. Thus, SNPmplexViewer is a general free tool enabling the reduction of SNaPshot's cost as well as the fast viewing and comparing of trace electropherograms for fragment analysis. SNPmplexViewer is available at http://cowry.agri.huji.ac.il/cgi-bin/SNPmplexViewer.cgi. PMID:21600063

Heterogeneity Coefficients for Mahalanobis' D as a Multivariate Effect Size.

PubMed

Del Giudice, Marco

2017-01-01

The Mahalanobis distance D is the multivariate generalization of Cohen's d and can be used as a standardized effect size for multivariate differences between groups. An important issue in the interpretation of D is heterogeneity, that is, the extent to which contributions to the overall effect size are concentrated in a small subset of variables rather than evenly distributed across the whole set. Here I present two heterogeneity coefficients for D based on the Gini coefficient, a well-known index of inequality among values of a distribution. I discuss the properties and limitations of the two coefficients and illustrate their use by reanalyzing some published findings from studies of gender differences.

Dynamical stability of the one-dimensional rigid Brownian rotator: the role of the rotator’s spatial size and shape

NASA Astrophysics Data System (ADS)

Jeknić-Dugić, Jasmina; Petrović, Igor; Arsenijević, Momir; Dugić, Miroljub

2018-05-01

We investigate dynamical stability of a single propeller-like shaped molecular cogwheel modelled as the fixed-axis rigid rotator. In the realistic situations, rotation of the finite-size cogwheel is subject to the environmentally-induced Brownian-motion effect that we describe by utilizing the quantum Caldeira-Leggett master equation. Assuming the initially narrow (classical-like) standard deviations for the angle and the angular momentum of the rotator, we investigate the dynamics of the first and second moments depending on the size, i.e. on the number of blades of both the free rotator as well as of the rotator in the external harmonic field. The larger the standard deviations, the less stable (i.e. less predictable) rotation. We detect the absence of the simple and straightforward rules for utilizing the rotator’s stability. Instead, a number of the size-related criteria appear whose combinations may provide the optimal rules for the rotator dynamical stability and possibly control. In the realistic situations, the quantum-mechanical corrections, albeit individually small, may effectively prove non-negligible, and also revealing subtlety of the transition from the quantum to the classical dynamics of the rotator. As to the latter, we detect a strong size-dependence of the transition to the classical dynamics beyond the quantum decoherence process.

Analysis of methods commonly used in biomedicine for treatment versus control comparison of very small samples.

PubMed

Ristić-Djurović, Jasna L; Ćirković, Saša; Mladenović, Pavle; Romčević, Nebojša; Trbovich, Alexander M

2018-04-01

A rough estimate indicated that use of samples of size not larger than ten is not uncommon in biomedical research and that many of such studies are limited to strong effects due to sample sizes smaller than six. For data collected from biomedical experiments it is also often unknown if mathematical requirements incorporated in the sample comparison methods are satisfied. Computer simulated experiments were used to examine performance of methods for qualitative sample comparison and its dependence on the effectiveness of exposure, effect intensity, distribution of studied parameter values in the population, and sample size. The Type I and Type II errors, their average, as well as the maximal errors were considered. The sample size 9 and the t-test method with p = 5% ensured error smaller than 5% even for weak effects. For sample sizes 6-8 the same method enabled detection of weak effects with errors smaller than 20%. If the sample sizes were 3-5, weak effects could not be detected with an acceptable error; however, the smallest maximal error in the most general case that includes weak effects is granted by the standard error of the mean method. The increase of sample size from 5 to 9 led to seven times more accurate detection of weak effects. Strong effects were detected regardless of the sample size and method used. The minimal recommended sample size for biomedical experiments is 9. Use of smaller sizes and the method of their comparison should be justified by the objective of the experiment. Copyright © 2018 Elsevier B.V. All rights reserved.

What big size you have! Using effect sizes to determine the impact of public health nursing interventions.

PubMed

Johnson, K E; McMorris, B J; Raynor, L A; Monsen, K A

2013-01-01

The Omaha System is a standardized interface terminology that is used extensively by public health nurses in community settings to document interventions and client outcomes. Researchers using Omaha System data to analyze the effectiveness of interventions have typically calculated p-values to determine whether significant client changes occurred between admission and discharge. However, p-values are highly dependent on sample size, making it difficult to distinguish statistically significant changes from clinically meaningful changes. Effect sizes can help identify practical differences but have not yet been applied to Omaha System data. We compared p-values and effect sizes (Cohen's d) for mean differences between admission and discharge for 13 client problems documented in the electronic health records of 1,016 young low-income parents. Client problems were documented anywhere from 6 (Health Care Supervision) to 906 (Caretaking/parenting) times. On a scale from 1 to 5, the mean change needed to yield a large effect size (Cohen's d ≥ 0.80) was approximately 0.60 (range = 0.50 - 1.03) regardless of p-value or sample size (i.e., the number of times a client problem was documented in the electronic health record). Researchers using the Omaha System should report effect sizes to help readers determine which differences are practical and meaningful. Such disclosures will allow for increased recognition of effective interventions.

Analytical sizing methods for behind-the-meter battery storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Di; Kintner-Meyer, Michael; Yang, Tao

In behind-the-meter application, battery storage system (BSS) is utilized to reduce a commercial or industrial customer’s payment for electricity use, including energy charge and demand charge. The potential value of BSS in payment reduction and the most economic size can be determined by formulating and solving standard mathematical programming problems. In this method, users input system information such as load profiles, energy/demand charge rates, and battery characteristics to construct a standard programming problem that typically involve a large number of constraints and decision variables. Such a large scale programming problem is then solved by optimization solvers to obtain numerical solutions.more » Such a method cannot directly link the obtained optimal battery sizes to input parameters and requires case-by-case analysis. In this paper, we present an objective quantitative analysis of costs and benefits of customer-side energy storage, and thereby identify key factors that affect battery sizing. Based on the analysis, we then develop simple but effective guidelines that can be used to determine the most cost-effective battery size or guide utility rate design for stimulating energy storage development. The proposed analytical sizing methods are innovative, and offer engineering insights on how the optimal battery size varies with system characteristics. We illustrate the proposed methods using practical building load profile and utility rate. The obtained results are compared with the ones using mathematical programming based methods for validation.« less

A Generally Robust Approach for Testing Hypotheses and Setting Confidence Intervals for Effect Sizes

ERIC Educational Resources Information Center

Keselman, H. J.; Algina, James; Lix, Lisa M.; Wilcox, Rand R.; Deering, Kathleen N.

2008-01-01

Standard least squares analysis of variance methods suffer from poor power under arbitrarily small departures from normality and fail to control the probability of a Type I error when standard assumptions are violated. This article describes a framework for robust estimation and testing that uses trimmed means with an approximate degrees of…

The extreme relativity of perception: A new contextual effect modulates human resolving power.

PubMed

Namdar, Gal; Ganel, Tzvi; Algom, Daniel

2016-04-01

The authors report the discovery of a new effect of context that modulates human resolving power with respect to an individual stimulus. They show that the size of the difference threshold or the just noticeable difference around a standard stimulus depends on the range of the other standards tested simultaneously for resolution within the same experimental session. The larger this range, the poorer the resolving power for a given standard. The authors term this effect the range of standards effect (RSE). They establish this result both in the visual domain for the perception of linear extent, and in the somatosensory domain for the perception of weight. They discuss the contingent nature of stimulus resolution in perception and psychophysics and contrast it with the immunity to contextual influences of visually guided action. (c) 2016 APA, all rights reserved).

The Cost-Effectiveness of NBPTS Teacher Certification

ERIC Educational Resources Information Center

Yeh, Stuart S.

2010-01-01

A cost-effectiveness analysis of the National Board for Professional Teaching Standards (NBPTS) program suggests that Board certification is less cost-effective than a range of alternative approaches for raising student achievement, including comprehensive school reform, class size reduction, a 10% increase in per pupil expenditure, the use of…

You Cannot Step Into the Same River Twice: When Power Analyses Are Optimistic.

PubMed

McShane, Blakeley B; Böckenholt, Ulf

2014-11-01

Statistical power depends on the size of the effect of interest. However, effect sizes are rarely fixed in psychological research: Study design choices, such as the operationalization of the dependent variable or the treatment manipulation, the social context, the subject pool, or the time of day, typically cause systematic variation in the effect size. Ignoring this between-study variation, as standard power formulae do, results in assessments of power that are too optimistic. Consequently, when researchers attempting replication set sample sizes using these formulae, their studies will be underpowered and will thus fail at a greater than expected rate. We illustrate this with both hypothetical examples and data on several well-studied phenomena in psychology. We provide formulae that account for between-study variation and suggest that researchers set sample sizes with respect to our generally more conservative formulae. Our formulae generalize to settings in which there are multiple effects of interest. We also introduce an easy-to-use website that implements our approach to setting sample sizes. Finally, we conclude with recommendations for quantifying between-study variation. © The Author(s) 2014.

7 CFR 51.344 - Size.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples for Processing Size § 51.344 Size. (a... buyer and seller. (c) Size is the dimension of the apples determined by the smallest opening through...

7 CFR 51.344 - Size.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples for Processing Size § 51.344 Size. (a... buyer and seller. (c) Size is the dimension of the apples determined by the smallest opening through...

7 CFR 51.344 - Size.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Standards for Grades of Apples for Processing Size § 51.344 Size. (a) The minimum and maximum sizes or range... the apples determined by the smallest opening through which it will pass. Application of Standards ...

7 CFR 51.344 - Size.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Standards for Grades of Apples for Processing Size § 51.344 Size. (a) The minimum and maximum sizes or range... the apples determined by the smallest opening through which it will pass. Application of Standards ...

7 CFR 51.344 - Size.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Standards for Grades of Apples for Processing Size § 51.344 Size. (a) The minimum and maximum sizes or range... the apples determined by the smallest opening through which it will pass. Application of Standards ...

A descriptive study of effect-size reporting in research reviews.

PubMed

Floyd, Judith A

2017-06-01

To describe effect-size reporting in research reviews completed in support of evidence-based practice in nursing. Many research reviews report nurses' critical appraisal of level, quality and overall strength of evidence available to address clinical questions. Several studies of research-review quality suggest effect-size information would be useful to include in these reviews, but none focused on reviewers' attention to effect sizes. Descriptive. One hundred and four reviews indexed in CINAHL as systematic reviews and published from July 2012-February 2014 were examined. Papers were required to be peer-reviewed, written in English, contain an abstract and have at least one nurse author. Reviews were excluded if they did not use critical appraisal methods to address evidence of correlation, prediction or effectiveness. Data from remaining papers (N = 73) were extracted by three or more independent coders using a structured coding form and detailed codebook. Data were stored, viewed and analysed using Microsoft Office Excel ® spreadsheet functions. Sixteen percent (n = 12) of the sample contained effect-size information. Of the 12, six included all the effect-size information recommended by APA guidelines. Independent of completeness of reporting, seven contained discussion of effect sizes in the paper, but none included effect-size information in abstracts. Research reviews available to practicing nurses often fail to include information needed to accurately assess how much improvement may result from implementation of evidence-based policies, programs, protocols or practices. Manuscript reviewers are urged to hold authors to APA standards for reporting/discussing effect-size information in both primary research reports and research reviews. © 2016 John Wiley & Sons Ltd.

Size Effects in the Resistivity of Kondo and Spin-Glass Wires

NASA Astrophysics Data System (ADS)

van Haesendonck, Chris

1998-03-01

Recently, several experiments have focused on possible size effects for the Kondo scattering in thin-film structures of very dilute magnetic alloys (concentration ~ 100 ppm) (For an overview, see M.A. Blachly and N. Giordano, Phys. Rev. B 51), 12537 (1995).. Intuitively, one expects size effects to occur as soon as the sample dimensions become smaller than the size of the Kondo screening cloud which induces a compensation of the local magnetic moments below the Kondo temperature. Since the size of the Kondo cloud is predicted to be of the order of 1 μ m, one should be able to observe pronounced size effects in thin-film Kondo alloys which have been patterned by standard electron beam lithography. Experiments performed by other groups have indeed revealed an important reduction of the slope of the Kondo resistivity for samples with micrometer dimensions. These experiments also show that the size effects are affected by disorder. On the other hand, our experiments on AuFe wires, which have been prepared by flash evaporation as well as by ion implantation, indicate the absence of size effects for the Kondo scattering down to a width of 38 nm. Therefore, the existence of the Kondo cloud remains a controversial issue. The size effects have also been investigated for more concentrated spin-glass alloys (concentration ~ 1 at.%). The resistivity measurements of thin-film spin glasses indicate that intrinsic size effects may be present for length scales below 100 nm (K.R. Lane et al., Phys. Rev. B 51), 945 (1995); G. Neuttiens et al., Europhys. Lett. 34, 617 (1996).. Due to the damping of the RKKY interaction by elastic defect scattering, size effects in the spin-glass regime can be strongly affected by disorder.

Comparison of quartz standards for X-ray diffraction analysis: HSE A9950 (Sikron F600) and NIST SRM 1878.

PubMed

Chisholm, Jim

2005-06-01

A further comparison of the Health and Safety Executive (HSE) standard quartz, A9950 (Sikron F600), and the National Institute of Standards and Technology (NIST) Standard Reference Material (SRM) 1878, standard respirable alpha-quartz, has been carried out for the four principal diffraction peaks. In the earlier comparison by Jeyaratnam and Nagar (1993, Ann Occup Hyg; 37: 167-79), the standards were both treated in ways which might change the particle size distribution and therefore the proportion of crystalline quartz. The two standards have now been compared in the most direct way possible with the minimum of sample treatment. There are no significant differences in the diffraction peak positions for the two standards. Nor do the peak area intensities differ significantly. The peak height intensities are consistently and significantly higher for Sikron F600 than for NIST SRM 1878. The particle size broadening of the diffraction peaks is evidently greater for NIST 1878, whose mass median diameter is quoted as 1.6 microm against 2.6 microm for Sikron F600. Taking the certified reference value for SRM 1878 as 95.5 +/- 1.1% crystalline quartz, the HSE standard A9950 (Sikron F600) contains 96.3 +/- 1.4% crystalline quartz based on a comparison of peak area intensities. On the same basis but using peak height intensities, the nominal crystalline quartz content of A9950 (Sikron F600) is 101.2 +/- 1.8%. Results obtained by comparison of quartz standards may not be generally applicable because of the effect of sample treatment on particle size and crystalline quartz content.

A user guide for the sign sizing program

Treesearch

Donna Sheehy; Kurt Krueger

1999-01-01

This user guide explains how to use the Forest Service Sign Sizing program. The program calculates the length and height of a rectangular sign panel for road and trail guide signs. Variable text messages and directional arrows can be mocked up using U.S. Federal Highway Administration standards. Users can make text or other changes and quickly determine the effect on...

Chemical release of pole-sized trees in a central hardwood clearcut

Treesearch

J. W. Van Sambeek; D. Abugarshall Kai; David B. Shenaut

1995-01-01

Our study evaluated the effectiveness of tree injection and full basal bark treatments using three herbicide formulations at reduced or standard practice rates to release crop trees in an overstocked pole-sized Central Hardwood stand. Herbicides tested included glyphosate (Accord), dicamba only (Banvel CST), and dicamba+2,4-D (Banvel 520). The study was conducted in a...

The effect of laryngoscope handle size on possible endotracheal intubation success in university football, ice hockey, and soccer players.

PubMed

Delaney, J Scott; Al-Kashmiri, Ammar; Baylis, Penny-Jane; Aljufaili, Mahmood; Correa, José A

2012-07-01

To assess the effectiveness of a standard long-handle laryngoscope and a short-handle laryngoscope on ease of possible intubation in football, ice hockey, and soccer players. Prospective crossover study. University Sport Medicine Clinic. Sixty-two university varsity football (62 males), 45 ice hockey (26 males and 19 females), and 39 soccer players (20 males, 19 females). Athletes were assessed for different airway and physical characteristics. Three different physicians then assessed the use of laryngoscopes of different handle sizes in supine athletes who were wearing protective equipment while in-line cervical spine immobilization was maintained. The ease of passage of a laryngoscope blade into the posterior oropharynx of a supine athlete was assessed using both a standard long-handle and a short-handle laryngoscope. Use of a short-handle laryngoscope was easier for all physicians in all sports as compared with a standard-sized laryngoscope. Passage of a laryngoscope blade into the posterior oropharynx of a supine athlete was easiest in soccer players and most difficult in football and ice hockey players for both sizes of laryngoscope. Interference from chest or shoulder pads was a common cause for difficulty in passing the laryngoscope blade into the posterior oropharynx for football and ice hockey players. In the rare instances that an endotracheal intubation is to be attempted on an unconscious athlete, a short-handle laryngoscope may provide the best chance for successful intubation.

77 FR 72702 - Small Business Size Standards: Information

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG26 Small Business Size Standards: Information AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the receipts based small business size standards for 15...

13 CFR 121.101 - What are SBA size standards?

Code of Federal Regulations, 2011 CFR

2011-01-01

... SBA size standards? (a) SBA's size standards define whether a business entity is small and, thus... Industry Classification System (NAICS). (b) NAICS is described in the North American Industry Classification Manual-United States, which is available from the National Technical Information Service, 5285...

13 CFR 121.101 - What are SBA size standards?

Code of Federal Regulations, 2010 CFR

2010-01-01

... SBA size standards? (a) SBA's size standards define whether a business entity is small and, thus... Industry Classification System (NAICS). (b) NAICS is described in the North American Industry Classification Manual-United States, which is available from the National Technical Information Service, 5285...

Precision, Reliability, and Effect Size of Slope Variance in Latent Growth Curve Models: Implications for Statistical Power Analysis

PubMed Central

Brandmaier, Andreas M.; von Oertzen, Timo; Ghisletta, Paolo; Lindenberger, Ulman; Hertzog, Christopher

2018-01-01

Latent Growth Curve Models (LGCM) have become a standard technique to model change over time. Prediction and explanation of inter-individual differences in change are major goals in lifespan research. The major determinants of statistical power to detect individual differences in change are the magnitude of true inter-individual differences in linear change (LGCM slope variance), design precision, alpha level, and sample size. Here, we show that design precision can be expressed as the inverse of effective error. Effective error is determined by instrument reliability and the temporal arrangement of measurement occasions. However, it also depends on another central LGCM component, the variance of the latent intercept and its covariance with the latent slope. We derive a new reliability index for LGCM slope variance—effective curve reliability (ECR)—by scaling slope variance against effective error. ECR is interpretable as a standardized effect size index. We demonstrate how effective error, ECR, and statistical power for a likelihood ratio test of zero slope variance formally relate to each other and how they function as indices of statistical power. We also provide a computational approach to derive ECR for arbitrary intercept-slope covariance. With practical use cases, we argue for the complementary utility of the proposed indices of a study's sensitivity to detect slope variance when making a priori longitudinal design decisions or communicating study designs. PMID:29755377

Treatment effectiveness and fidelity of manual therapy to the knee: A systematic review and meta-analysis.

PubMed

Salamh, Paul; Cook, Chad; Reiman, Michael P; Sheets, Charles

2017-09-01

Manual therapy (MT) is a commonly used treatment for knee osteoarthritis (OA) but to date only one systematic review has explored its effectiveness. The purpos e of the present study was to perform a systematic review and meta-analysis of the literature, to determine the effectiveness and fidelity of studies using MT techniques in individuals with knee OA. Relevant studies were assessed for inclusion. Effectiveness was measured using effect sizes, and methodological bias and treatment fidelity were both explored. Effect sizes were calculated using standardized mean differences (SMD) based on pooled data depending on statistical and clinical heterogeneity, as well as risk of bias. The search captured 2,969 studies; after screening, 12 were included. Four had a low risk of bias and high treatment fidelity. For self-reported function, comparing MT with no treatment resulted in a large effect size (standardized mean difference [SMD] 0.84), as did adding MT to a comparator treatment (SMD 0.78). A significant difference was found for pain when adding MT to a comparator treatment (SMD 0.73). The findings in the present meta-analytical review support the use of MT versus a number of different comparators for improvement in self-reported knee function. Lesser support is present for pain reduction, and no endorsement of functional performance can be made at this time. Copyright © 2016 John Wiley & Sons, Ltd.

The impact of multiple endpoint dependency on Q and I(2) in meta-analysis.

PubMed

Thompson, Christopher Glen; Becker, Betsy Jane

2014-09-01

A common assumption in meta-analysis is that effect sizes are independent. When correlated effect sizes are analyzed using traditional univariate techniques, this assumption is violated. This research assesses the impact of dependence arising from treatment-control studies with multiple endpoints on homogeneity measures Q and I(2) in scenarios using the unbiased standardized-mean-difference effect size. Univariate and multivariate meta-analysis methods are examined. Conditions included different overall outcome effects, study sample sizes, numbers of studies, between-outcomes correlations, dependency structures, and ways of computing the correlation. The univariate approach used typical fixed-effects analyses whereas the multivariate approach used generalized least-squares (GLS) estimates of a fixed-effects model, weighted by the inverse variance-covariance matrix. Increased dependence among effect sizes led to increased Type I error rates from univariate models. When effect sizes were strongly dependent, error rates were drastically higher than nominal levels regardless of study sample size and number of studies. In contrast, using GLS estimation to account for multiple-endpoint dependency maintained error rates within nominal levels. Conversely, mean I(2) values were not greatly affected by increased amounts of dependency. Last, we point out that the between-outcomes correlation should be estimated as a pooled within-groups correlation rather than using a full-sample estimator that does not consider treatment/control group membership. Copyright © 2014 John Wiley & Sons, Ltd.

Criteria for software modularization

NASA Technical Reports Server (NTRS)

Card, David N.; Page, Gerald T.; Mcgarry, Frank E.

1985-01-01

A central issue in programming practice involves determining the appropriate size and information content of a software module. This study attempted to determine the effectiveness of two widely used criteria for software modularization, strength and size, in reducing fault rate and development cost. Data from 453 FORTRAN modules developed by professional programmers were analyzed. The results indicated that module strength is a good criterion with respect to fault rate, whereas arbitrary module size limitations inhibit programmer productivity. This analysis is a first step toward defining empirically based standards for software modularization.

Effects of Caffeine and Chlorogenic Acid on Propidium Iodide Accessibility to DNA: Consequences on Genome Size Evaluation in Coffee Tree

PubMed Central

NOIROT, M.; BARRE, P.; DUPERRAY, C.; LOUARN, J.; HAMON, S.

2003-01-01

Estimates of genome size using flow cytometry can be biased by the presence of cytosolic compounds, leading to pseudo‐intraspecific variation in genome size. Two important compounds present in coffee trees—caffeine and chlorogenic acid—modify accessibility of the dye propidium iodide to Petunia DNA, a species used as internal standard in our genome size evaluation. These compounds could be responsible for intraspecific variation in genome size since their contents vary between trees. They could also be implicated in environmental variations in genome size, such as those revealed when comparing the results of evaluations carried out on different dates on several genotypes. PMID:12876189

Meta-analysis of multiple outcomes: a multilevel approach.

PubMed

Van den Noortgate, Wim; López-López, José Antonio; Marín-Martínez, Fulgencio; Sánchez-Meca, Julio

2015-12-01

In meta-analysis, dependent effect sizes are very common. An example is where in one or more studies the effect of an intervention is evaluated on multiple outcome variables for the same sample of participants. In this paper, we evaluate a three-level meta-analytic model to account for this kind of dependence, extending the simulation results of Van den Noortgate, López-López, Marín-Martínez, and Sánchez-Meca Behavior Research Methods, 45, 576-594 (2013) by allowing for a variation in the number of effect sizes per study, in the between-study variance, in the correlations between pairs of outcomes, and in the sample size of the studies. At the same time, we explore the performance of the approach if the outcomes used in a study can be regarded as a random sample from a population of outcomes. We conclude that although this approach is relatively simple and does not require prior estimates of the sampling covariances between effect sizes, it gives appropriate mean effect size estimates, standard error estimates, and confidence interval coverage proportions in a variety of realistic situations.

75 FR 61597 - Small Business Size Standards: Retail Trade

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AF69 Small Business Size Standards: Retail Trade AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is modifying 47 small business size standards for industries in North...

75 FR 61591 - Small Business Size Standards; Other Services.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AF70 Small Business Size Standards; Other Services. AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the small business size standards for 18 industries in North...

7 CFR 51.3198 - Size classifications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Size classifications. 51.3198 Section 51.3198... STANDARDS) United States Standards for Grades of Bermuda-Granex-Grano Type Onions Size Classifications § 51.3198 Size classifications. Size shall be specified in connection with the grade in terms of minimum...

7 CFR 51.3198 - Size classifications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Size classifications. 51.3198 Section 51.3198... STANDARDS) United States Standards for Grades of Bermuda-Granex-Grano Type Onions Size Classifications § 51.3198 Size classifications. Size shall be specified in connection with the grade in terms of minimum...

7 CFR 51.3198 - Size classifications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Size classifications. 51.3198 Section 51.3198... STANDARDS) United States Standards for Grades of Bermuda-Granex-Grano Type Onions Size Classifications § 51.3198 Size classifications. Size shall be specified in connection with the grade in terms of minimum...

Migrants, healthy worker effect, and mortality trends in the Gulf Cooperation Council countries.

PubMed

Chaabna, Karima; Cheema, Sohaila; Mamtani, Ravinder

2017-01-01

The Gulf Cooperation Council (GCC) countries namely, Bahrain, Kuwait, Oman, Qatar, United Arab Emirates (UAE), and Saudi Arabia, have experienced unique demographic changes. The major population growth contributor in these countries is young migrants, which has led to a shift in the population age pyramid. Migrants constitute the vast proportion of GCC countries' population reaching >80% in Qatar and UAE. Using Global Burden of Disease Study 2015 (GBD 2015) and United Nations data, for the GCC countries, we assessed the association between age-standardized mortality and population size trends with linear and polynomial regressions. In 1990-2015, all-cause age-standardized mortality was inversely proportional to national population size (p-values: 0.0001-0.0457). In Bahrain, Qatar, Oman, and Saudi Arabia, the highest annual decrease in mortality was observed when the annual population growth was the highest. In Qatar, all-cause age-specific mortality was inversely proportional to age-specific population size. This association was statistically significant among the 5-14 and 15-49 age groups, which have the largest population size. Cause-specific age-standardized mortality was also inversely proportional to population size. This association was statistically significant for half of the GBD 2015-defined causes of death such as "cirrhosis and other chronic liver diseases" and "HIV/AIDS and tuberculosis". Remarkably, incoming migrants to Qatar have to be negative for HIV, hepatitis B and C, and tuberculosis. These results show that decline in mortality can be partly attributed to the increase in GCC countries' population suggesting a healthy migrant effect that influences mortality rates. Consequently, benefits of health interventions and healthcare improvement are likely to be exaggerated in such countries hosting a substantial proportion of migrants compared with countries where migration is low. Researchers and policymakers should be cautious to not exclusively attribute decline in mortality within the GCC countries as a result of the positive effects of health interventions or healthcare improvement.

Migrants, healthy worker effect, and mortality trends in the Gulf Cooperation Council countries

PubMed Central

Cheema, Sohaila; Mamtani, Ravinder

2017-01-01

The Gulf Cooperation Council (GCC) countries namely, Bahrain, Kuwait, Oman, Qatar, United Arab Emirates (UAE), and Saudi Arabia, have experienced unique demographic changes. The major population growth contributor in these countries is young migrants, which has led to a shift in the population age pyramid. Migrants constitute the vast proportion of GCC countries’ population reaching >80% in Qatar and UAE. Using Global Burden of Disease Study 2015 (GBD 2015) and United Nations data, for the GCC countries, we assessed the association between age-standardized mortality and population size trends with linear and polynomial regressions. In 1990–2015, all-cause age-standardized mortality was inversely proportional to national population size (p-values: 0.0001–0.0457). In Bahrain, Qatar, Oman, and Saudi Arabia, the highest annual decrease in mortality was observed when the annual population growth was the highest. In Qatar, all-cause age-specific mortality was inversely proportional to age-specific population size. This association was statistically significant among the 5–14 and 15–49 age groups, which have the largest population size. Cause-specific age-standardized mortality was also inversely proportional to population size. This association was statistically significant for half of the GBD 2015-defined causes of death such as “cirrhosis and other chronic liver diseases” and “HIV/AIDS and tuberculosis”. Remarkably, incoming migrants to Qatar have to be negative for HIV, hepatitis B and C, and tuberculosis. These results show that decline in mortality can be partly attributed to the increase in GCC countries’ population suggesting a healthy migrant effect that influences mortality rates. Consequently, benefits of health interventions and healthcare improvement are likely to be exaggerated in such countries hosting a substantial proportion of migrants compared with countries where migration is low. Researchers and policymakers should be cautious to not exclusively attribute decline in mortality within the GCC countries as a result of the positive effects of health interventions or healthcare improvement. PMID:28632794

A generalized least squares regression approach for computing effect sizes in single-case research: application examples.

PubMed

Maggin, Daniel M; Swaminathan, Hariharan; Rogers, Helen J; O'Keeffe, Breda V; Sugai, George; Horner, Robert H

2011-06-01

A new method for deriving effect sizes from single-case designs is proposed. The strategy is applicable to small-sample time-series data with autoregressive errors. The method uses Generalized Least Squares (GLS) to model the autocorrelation of the data and estimate regression parameters to produce an effect size that represents the magnitude of treatment effect from baseline to treatment phases in standard deviation units. In this paper, the method is applied to two published examples using common single case designs (i.e., withdrawal and multiple-baseline). The results from these studies are described, and the method is compared to ten desirable criteria for single-case effect sizes. Based on the results of this application, we conclude with observations about the use of GLS as a support to visual analysis, provide recommendations for future research, and describe implications for practice. Copyright © 2011 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Programs 219.303 Determining North American Industry Classification System (NAICS) codes and size standards...

76 FR 70680 - Small Business Size Standards: Real Estate and Rental and Leasing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-15

... industries and one sub- industry in North American Industry Classification System (NAICS) Sector 53, Real... industries grouped by NAICS Sector. SBA issued a White Paper entitled ``Size Standards Methodology'' and published in the October 21, 2009 issue of the Federal Register. That ``Size Standards Methodology'' is...

78 FR 37404 - Small Business Size Standards: Support Activities for Mining

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG44 Small Business Size Standards: Support Activities for Mining AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the small business size standards for three of...

4 CFR 21.5 - Protest issues not for consideration.

Code of Federal Regulations, 2010 CFR

2010-01-01

... official to file a protest or not to file a protest in connection with a public-private competition. [61 FR... business size standards and North American Industry Classification System (NAICS) standards. Challenges of established size standards or the size status of particular firms, and challenges of the selected NAICS code...

78 FR 1636 - Semiannual Regulatory Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... Business Size 3245-AG51 Standards for Other Industries With Employee- Based Size Standards not Part of... applicants that do not meet the small business size standards for their industries. For the 504 Program, the... U.S.C. 632(a) Abstract: SBA has received numerous comments from businesses, industry associations...

76 FR 27952 - Small Business Size Standards: Professional, Scientific and Technical Services.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... Administration (SBA or Agency) proposed to increase small business size standards for 35 industries and one sub... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG07 Small Business Size Standards: Professional, Scientific and Technical Services. AGENCY: U.S. Small Business Administration. ACTION: Proposed...

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Programs 219.303 Determining North American Industry Classification System (NAICS) codes and size standards...

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Determining North American Industry Classification System (NAICS) codes and size standards. Contracting...

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Determining North American Industry Classification System (NAICS) codes and size standards. Contracting...

48 CFR 19.303 - Determining North American Industry Classification System codes and size standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Industry Classification System codes and size standards. 19.303 Section 19.303 Federal Acquisition... of Small Business Status for Small Business Programs 19.303 Determining North American Industry... North American Industry Classification System (NAICS) code and related small business size standard and...

7 CFR 51.1903 - Size classification.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Size classification. 51.1903 Section 51.1903... STANDARDS) United States Consumer Standards for Fresh Tomatoes Size and Maturity Classification § 51.1903 Size classification. The following terms may be used for describing the size of the tomatoes in any lot...

7 CFR 51.1402 - Size classification.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Size classification. 51.1402 Section 51.1402... STANDARDS) United States Standards for Grades of Pecans in the Shell 1 Size Classification § 51.1402 Size classification. Size of pecans may be specified in connection with the grade in accordance with one of the...

7 CFR 51.1402 - Size classification.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Size classification. 51.1402 Section 51.1402... STANDARDS) United States Standards for Grades of Pecans in the Shell 1 Size Classification § 51.1402 Size classification. Size of pecans may be specified in connection with the grade in accordance with one of the...

7 CFR 51.1903 - Size classification.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Size classification. 51.1903 Section 51.1903... STANDARDS) United States Consumer Standards for Fresh Tomatoes Size and Maturity Classification § 51.1903 Size classification. The following terms may be used for describing the size of the tomatoes in any lot...

7 CFR 51.1402 - Size classification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Size classification. 51.1402 Section 51.1402... STANDARDS) United States Standards for Grades of Pecans in the Shell 1 Size Classification § 51.1402 Size classification. Size of pecans may be specified in connection with the grade in accordance with one of the...

7 CFR 51.1903 - Size classification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Size classification. 51.1903 Section 51.1903... STANDARDS) United States Consumer Standards for Fresh Tomatoes Size and Maturity Classification § 51.1903 Size classification. The following terms may be used for describing the size of the tomatoes in any lot...

Development and Monte Carlo Study of a Procedure for Correcting the Standardized Mean Difference for Measurement Error in the Independent Variable

ERIC Educational Resources Information Center

Nugent, William Robert; Moore, Matthew; Story, Erin

2015-01-01

The standardized mean difference (SMD) is perhaps the most important meta-analytic effect size. It is typically used to represent the difference between treatment and control population means in treatment efficacy research. It is also used to represent differences between populations with different characteristics, such as persons who are…

Signal or noise? Separating grain size-dependent Nd isotope variability from provenance shifts in Indus delta sediments, Pakistan

NASA Astrophysics Data System (ADS)

Jonell, T. N.; Li, Y.; Blusztajn, J.; Giosan, L.; Clift, P. D.

2017-12-01

Rare earth element (REE) radioisotope systems, such as neodymium (Nd), have been traditionally used as powerful tracers of source provenance, chemical weathering intensity, and sedimentary processes over geologic timescales. More recently, the effects of physical fractionation (hydraulic sorting) of sediments during transport have called into question the utility of Nd isotopes as a provenance tool. Is source terrane Nd provenance resolvable if sediment transport strongly induces noise? Can grain-size sorting effects be quantified? This study works to address such questions by utilizing grain size analysis, trace element geochemistry, and Nd isotope geochemistry of bulk and grain-size fractions (<63μm, 63-125 μm, 125-250 μm) from the Indus delta of Pakistan. Here we evaluate how grain size effects drive Nd isotope variability and further resolve the total uncertainties associated with Nd isotope compositions of bulk sediments. Results from the Indus delta indicate bulk sediment ɛNd compositions are most similar to the <63 µm fraction as a result of strong mineralogical control on bulk compositions by silt- to clay-sized monazite and/or allanite. Replicate analyses determine that the best reproducibility (± 0.15 ɛNd points) is observed in the 125-250 µm fraction. The bulk and finest fractions display the worst reproducibility (±0.3 ɛNd points). Standard deviations (2σ) indicate that bulk sediment uncertainties are no more than ±1.0 ɛNd points. This argues that excursions of ≥1.0 ɛNd points in any bulk Indus delta sediments must in part reflect an external shift in provenance irrespective of sample composition, grain size, and grain size distribution. Sample standard deviations (2s) estimate that any terrigenous bulk sediment composition should vary no greater than ±1.1 ɛNd points if provenance remains constant. Findings from this study indicate that although there are grain-size dependent Nd isotope effects, they are minimal in the Indus delta such that resolvable provenance-driven trends can be identified in bulk sediment ɛNd compositions over the last 20 k.y., and that overall provenance trends remain consistent with previous findings.

New Evidence on the Relationship Between Climate and Conflict

NASA Astrophysics Data System (ADS)

Burke, M.

2015-12-01

We synthesize a large new body of research on the relationship between climate and conflict. We consider many types of human conflict, ranging from interpersonal conflict -- domestic violence, road rage, assault, murder, and rape -- to intergroup conflict -- riots, coups, ethnic violence, land invasions, gang violence, and civil war. After harmonizing statistical specifications and standardizing estimated effect sizes within each conflict category, we implement a meta-analysis that allows us to estimate the mean effect of climate variation on conflict outcomes as well as quantify the degree of variability in this effect size across studies. Looking across more than 50 studies, we find that deviations from moderate temperatures and precipitation patterns systematically increase the risk of conflict, often substantially, with average effects that are highly statistically significant. We find that contemporaneous temperature has the largest average effect by far, with each 1 standard deviation increase toward warmer temperatures increasing the frequency of contemporaneous interpersonal conflict by 2% and of intergroup conflict by more than 10%. We also quantify substantial heterogeneity in these effect estimates across settings.

The reasonable woman standard: a meta-analytic review of gender differences in perceptions of sexual harassment.

PubMed

Blumenthal, J A

1998-02-01

Courts and legislatures have begun to develop the "reasonable woman standard" (RWS) as a criterion for deciding sexual harassment trials. This standard rests on assumptions of a "wide divergence" between the perceptions of men and women when viewing social-sexual behavior that may be considered harassing. Narrative reviews of the literature on such perceptions have suggested that these assumptions are only minimally supported. To test these assumptions quantitatively, a meta-analytic review was conducted that assessed the size, stability, and moderators of gender differences in perceptions of sexual harassment. The effect of the actor's status relative to the target also was evaluated meta-analytically, as one alternative to the importance of gender effects. Results supported the claims of narrative reviews for a relatively small gender effect, and draw attention to the status effect. In discussing legal implications of the present findings, earlier claims are echoed suggesting caution in establishing the reasonable woman standard, and one alternative to the RWS, the "reasonable victim standard," is discussed.

Blinded sample size re-estimation in three-arm trials with 'gold standard' design.

PubMed

Mütze, Tobias; Friede, Tim

2017-10-15

In this article, we study blinded sample size re-estimation in the 'gold standard' design with internal pilot study for normally distributed outcomes. The 'gold standard' design is a three-arm clinical trial design that includes an active and a placebo control in addition to an experimental treatment. We focus on the absolute margin approach to hypothesis testing in three-arm trials at which the non-inferiority of the experimental treatment and the assay sensitivity are assessed by pairwise comparisons. We compare several blinded sample size re-estimation procedures in a simulation study assessing operating characteristics including power and type I error. We find that sample size re-estimation based on the popular one-sample variance estimator results in overpowered trials. Moreover, sample size re-estimation based on unbiased variance estimators such as the Xing-Ganju variance estimator results in underpowered trials, as it is expected because an overestimation of the variance and thus the sample size is in general required for the re-estimation procedure to eventually meet the target power. To overcome this problem, we propose an inflation factor for the sample size re-estimation with the Xing-Ganju variance estimator and show that this approach results in adequately powered trials. Because of favorable features of the Xing-Ganju variance estimator such as unbiasedness and a distribution independent of the group means, the inflation factor does not depend on the nuisance parameter and, therefore, can be calculated prior to a trial. Moreover, we prove that the sample size re-estimation based on the Xing-Ganju variance estimator does not bias the effect estimate. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Apparent quasar disc sizes in the "bird's nest" paradigm

NASA Astrophysics Data System (ADS)

Abolmasov, P.

2017-04-01

Context. Quasar microlensing effects make it possible to measure the accretion disc sizes around distant supermassive black holes that are still well beyond the spatial resolution of contemporary instrumentation. The sizes measured with this technique appear inconsistent with the standard accretion disc model. Not only are the measured accretion disc sizes larger, but their dependence on wavelength is in most cases completely different from the predictions of the standard model. Aims: We suggest that these discrepancies may arise not from non-standard accretion disc structure or systematic errors, as it was proposed before, but rather from scattering and reprocession of the radiation of the disc. In particular, the matter falling from the gaseous torus and presumably feeding the accretion disc may at certain distances become ionized and produce an extended halo that is free from colour gradients. Methods: A simple analytical model is proposed assuming that a geometrically thick translucent inflow acts as a scattering mirror changing the apparent spatial properties of the disc. This inflow may be also identified with the broad line region or its inner parts. Results: Such a model is able to explain the basic properties of the apparent disc sizes, primarily their large values and their shallow dependence on wavelength. The only condition required is to scatter a significant portion of the luminosity of the disc. This can easily be fulfilled if the scattering inflow has a large geometrical thickness and clumpy structure.

A statistical analysis of seat belt effectiveness in 1973-1975 model cars involved in towaway crashes. Volume 1

DOT National Transportation Integrated Search

1976-09-01

Standardized injury rates and seat belt effectiveness measures are derived from a probability sample of towaway accidents involving 1973-1975 model cars. The data were collected in five different geographic regions. Weighted sample size available for...

Sand dune ridge alignment effects on surface BRF over the Libya-4 CEOS calibration site.

PubMed

Govaerts, Yves M

2015-02-03

The Libya-4 desert area, located in the Great Sand Sea, is one of the most important bright desert CEOS pseudo-invariant calibration sites by its size and radiometric stability. This site is intensively used for radiometer drift monitoring, sensor intercalibration and as an absolute calibration reference based on simulated radiances traceable to the SI standard. The Libya-4 morphology is composed of oriented sand dunes shaped by dominant winds. The effects of sand dune spatial organization on the surface bidirectional reflectance factor is analyzed in this paper using Raytran, a 3D radiative transfer model. The topography is characterized with the 30 m resolution ASTER digital elevation model. Four different regions-of-interest sizes, ranging from 10 km up to 100 km, are analyzed. Results show that sand dunes generate more backscattering than forward scattering at the surface. The mean surface reflectance averaged over different viewing and illumination angles is pretty much independent of the size of the selected area, though the standard deviation differs. Sun azimuth position has an effect on the surface reflectance field, which is more pronounced for high Sun zenith angles. Such 3D azimuthal effects should be taken into account to decrease the simulated radiance uncertainty over Libya-4 below 3% for wavelengths larger than 600 nm.

Propulsion Technology Demonstrator. [Demonstrating Novel CubeSat Technologies in Low Earth Orbit

NASA Technical Reports Server (NTRS)

Marmie, John; Martinez, Andres; Petro, Andrew

2015-01-01

NASA's Pathfinder Technology Demonstrator (PTD) project will test the operation of a variety of novel CubeSat technologies in low- Earth orbit, providing significant enhancements to the performance of these small and effective spacecraft. Each Pathfinder Technology Demonstrator mission consists of a 6-unit (6U) CubeSat weighing approximately 26 pounds (12 kilograms) and measuring 12 inches x 10 inches x 4 inches (30 centimeters x 25 centimeters x 10 centimeters), comparable in size to a common shoebox. CubeSats are a class of nanosatellites that use a standard size and form factor. The standard Cube- Sat size uses a "one unit" or "1U" measuring 4 inches x 4 inches x 4 inches (10x10x10 centimeters) and is extendable to larger sizes by "stacking" a number of the 1U blocks to form a larger spacecraft. Each PTD spacecraft will also be equipped with deployable solar arrays that provide an average of 44 watts of power while in orbit.

What is the effect of area size when using local area practice style as an instrument?

PubMed

Brooks, John M; Tang, Yuexin; Chapman, Cole G; Cook, Elizabeth A; Chrischilles, Elizabeth A

2013-08-01

Discuss the tradeoffs inherent in choosing a local area size when using a measure of local area practice style as an instrument in instrumental variable estimation when assessing treatment effectiveness. Assess the effectiveness of angiotensin converting-enzyme inhibitors and angiotensin receptor blockers on survival after acute myocardial infarction for Medicare beneficiaries using practice style instruments based on different-sized local areas around patients. We contrasted treatment effect estimates using different local area sizes in terms of the strength of the relationship between local area practice styles and individual patient treatment choices; and indirect assessments of the assumption violations. Using smaller local areas to measure practice styles exploits more treatment variation and results in smaller standard errors. However, if treatment effects are heterogeneous, the use of smaller local areas may increase the risk that local practice style measures are dominated by differences in average treatment effectiveness across areas and bias results toward greater effectiveness. Local area practice style measures can be useful instruments in instrumental variable analysis, but the use of smaller local area sizes to generate greater treatment variation may result in treatment effect estimates that are biased toward higher effectiveness. Assessment of whether ecological bias can be mitigated by changing local area size requires the use of outside data sources. Copyright © 2013 Elsevier Inc. All rights reserved.

48 CFR 19.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 19.303 Section 19.303 Federal Acquisition... Classification System (NAICS) codes and size standards. (a) The contracting officer shall determine the...

Generalized SAMPLE SIZE Determination Formulas for Investigating Contextual Effects by a Three-Level Random Intercept Model.

PubMed

Usami, Satoshi

2017-03-01

Behavioral and psychological researchers have shown strong interests in investigating contextual effects (i.e., the influences of combinations of individual- and group-level predictors on individual-level outcomes). The present research provides generalized formulas for determining the sample size needed in investigating contextual effects according to the desired level of statistical power as well as width of confidence interval. These formulas are derived within a three-level random intercept model that includes one predictor/contextual variable at each level to simultaneously cover various kinds of contextual effects that researchers can show interest. The relative influences of indices included in the formulas on the standard errors of contextual effects estimates are investigated with the aim of further simplifying sample size determination procedures. In addition, simulation studies are performed to investigate finite sample behavior of calculated statistical power, showing that estimated sample sizes based on derived formulas can be both positively and negatively biased due to complex effects of unreliability of contextual variables, multicollinearity, and violation of assumption regarding the known variances. Thus, it is advisable to compare estimated sample sizes under various specifications of indices and to evaluate its potential bias, as illustrated in the example.

Establishment of a Universal Size Standard Strain for Use with the PulseNet Standardized Pulsed-Field Gel Electrophoresis Protocols: Converting the National Databases to the New Size Standard

PubMed Central

Hunter, Susan B.; Vauterin, Paul; Lambert-Fair, Mary Ann; Van Duyne, M. Susan; Kubota, Kristy; Graves, Lewis; Wrigley, Donna; Barrett, Timothy; Ribot, Efrain

2005-01-01

The PulseNet National Database, established by the Centers for Disease Control and Prevention in 1996, consists of pulsed-field gel electrophoresis (PFGE) patterns obtained from isolates of food-borne pathogens (currently Escherichia coli O157:H7, Salmonella, Shigella, and Listeria) and textual information about the isolates. Electronic images and accompanying text are submitted from over 60 U.S. public health and food regulatory agency laboratories. The PFGE patterns are generated according to highly standardized PFGE protocols. Normalization and accurate comparison of gel images require the use of a well-characterized size standard in at least three lanes of each gel. Originally, a well-characterized strain of each organism was chosen as the reference standard for that particular database. The increasing number of databases, difficulty in identifying an organism-specific standard for each database, the increased range of band sizes generated by the use of additional restriction endonucleases, and the maintenance of many different organism-specific strains encouraged us to search for a more versatile and universal DNA size marker. A Salmonella serotype Braenderup strain (H9812) was chosen as the universal size standard. This strain was subjected to rigorous testing in our laboratories to ensure that it met the desired criteria, including coverage of a wide range of DNA fragment sizes, even distribution of bands, and stability of the PFGE pattern. The strategy used to convert and compare data generated by the new and old reference standards is described. PMID:15750058

Scale-dependent effect sizes of ecological drivers on biodiversity: why standardised sampling is not enough.

PubMed

Chase, Jonathan M; Knight, Tiffany M

2013-05-01

There is little consensus about how natural (e.g. productivity, disturbance) and anthropogenic (e.g. invasive species, habitat destruction) ecological drivers influence biodiversity. Here, we show that when sampling is standardised by area (species density) or individuals (rarefied species richness), the measured effect sizes depend critically on the spatial grain and extent of sampling, as well as the size of the species pool. This compromises comparisons of effects sizes within studies using standard statistics, as well as among studies using meta-analysis. To derive an unambiguous effect size, we advocate that comparisons need to be made on a scale-independent metric, such as Hurlbert's Probability of Interspecific Encounter. Analyses of this metric can be used to disentangle the relative influence of changes in the absolute and relative abundances of individuals, as well as their intraspecific aggregations, in driving differences in biodiversity among communities. This and related approaches are necessary to achieve generality in understanding how biodiversity responds to ecological drivers and will necessitate a change in the way many ecologists collect and analyse their data. © 2013 John Wiley & Sons Ltd/CNRS.

Cognitive-behavioral high parental involvement treatments for pediatric obsessive-compulsive disorder: A meta-analysis.

PubMed

Iniesta-Sepúlveda, Marina; Rosa-Alcázar, Ana I; Sánchez-Meca, Julio; Parada-Navas, José L; Rosa-Alcázar, Ángel

2017-06-01

A meta-analysis on the efficacy of cognitive-behavior-family treatment (CBFT) on children and adolescents with obsessive-compulsive disorder (OCD) was accomplished. The purposes of the study were: (a) to estimate the effect magnitude of CBFT in ameliorating obsessive-compulsive symptoms and reducing family accommodation on pediatric OCD and (b) to identify potential moderator variables of the effect sizes. A literature search enabled us to identify 27 studies that fulfilled our selection criteria. The effect size index was the standardized pretest-postest mean change index. For obsessive-compulsive symptoms, the adjusted mean effect size for CBFT was clinically relevant and statistically significant in the posttest (d adj =1.464). For family accommodation the adjusted mean effect size was also positive and statistically significant, but in a lesser extent than for obsessive-compulsive symptoms (d adj =0.511). Publication bias was discarded as a threat against the validity of the meta-analytic results. Large heterogeneity among effect sizes was found. Better results were found when CBFT was individually applied than in group (d + =2.429 and 1.409, respectively). CBFT is effective to reduce obsessive-compulsive symptoms, but offers a limited effect for family accommodation. Additional modules must be included in CBFT to improve its effectiveness on family accommodation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Potential of mean force between identical charged nanoparticles immersed in a size-asymmetric monovalent electrolyte

NASA Astrophysics Data System (ADS)

Guerrero-García, Guillermo Iván; González-Mozuelos, Pedro; de la Cruz, Mónica Olvera

2011-10-01

In a previous theoretical and simulation study [G. I. Guerrero-García, E. González-Tovar, and M. Olvera de la Cruz, Soft Matter 6, 2056 (2010)], it has been shown that an asymmetric charge neutralization and electrostatic screening depending on the charge polarity of a single nanoparticle occurs in the presence of a size-asymmetric monovalent electrolyte. This effect should also impact the effective potential between two macroions suspended in such a solution. Thus, in this work we study the mean force and the potential of mean force between two identical charged nanoparticles immersed in a size-asymmetric monovalent electrolyte, showing that these results go beyond the standard description provided by the well-known Derjaguin-Landau-Verwey-Overbeek theory. To include consistently the ion-size effects, molecular dynamics (MD) simulations and liquid theory calculations are performed at the McMillan-Mayer level of description in which the solvent is taken into account implicitly as a background continuum with the suitable dielectric constant. Long-range electrostatic interactions are handled properly in the simulations via the well established Ewald sums method and the pre-averaged Ewald sums approach, originally proposed for homogeneous ionic fluids. An asymmetric behavior with respect to the colloidal charge polarity is found for the effective interactions between two identical nanoparticles. In particular, short-range attractions are observed between two equally charged nanoparticles, even though our model does not include specific interactions; these attractions are greatly enhanced for anionic nanoparticles immersed in standard electrolytes where cations are smaller than anions. Practical implications of some of the presented results are also briefly discussed. A good accord between the standard Ewald method and the pre-averaged Ewald approach is attained, despite the fact that the ionic system studied here is certainly inhomogeneous. In general, good agreement between the liquid theory approach and MD simulations is also found.

Effect of field of view and monocular viewing on angular size judgements in an outdoor scene

NASA Technical Reports Server (NTRS)

Denz, E. A.; Palmer, E. A.; Ellis, S. R.

1980-01-01

Observers typically overestimate the angular size of distant objects. Significantly, overestimations are greater in outdoor settings than in aircraft visual-scene simulators. The effect of field of view and monocular and binocular viewing conditions on angular size estimation in an outdoor field was examined. Subjects adjusted the size of a variable triangle to match the angular size of a standard triangle set at three greater distances. Goggles were used to vary the field of view from 11.5 deg to 90 deg for both monocular and binocular viewing. In addition, an unrestricted monocular and binocular viewing condition was used. It is concluded that neither restricted fields of view similar to those present in visual simulators nor the restriction of monocular viewing causes a significant loss in depth perception in outdoor settings. Thus, neither factor should significantly affect the depth realism of visual simulators.

Gender differences in health-related quality of life of Australian chronically-ill adults: patient and physician characteristics do matter.

PubMed

Jayasinghe, Upali W; Harris, Mark F; Taggart, Jane; Christl, Bettina; Black, Deborah A

2013-06-21

The aims of this study were to explore the health-related quality of life (HRQoL) in a large sample of Australian chronically-ill patients (type 2 diabetes and/or hypertension/ischaemic heart disease), to investigate the impact of characteristics of patients and their general practitioners on their HRQoL and to examine clinically significant differences in HRQoL among males and females. This was a cross-sectional study with 193 general practitioners and 2181 of their chronically-ill patients aged 18 years or more using the standard Short Form Health Survey (SF-12) version 2. SF-12 physical component score (PCS-12) and mental component score (MCS-12) were derived using the standard US algorithm. Multilevel regression analysis (patients at level 1 and general practitioners at level 2) was applied to relate PCS-12 and MCS-12 to patient and general practitioner (GP) characteristics. Employment was likely to have a clinically significant larger positive effect on HRQoL of males (regression coefficient (B) (PCS-12) = 7.29, P < 0.001, effect size = 1.23 and B (MCS-12) = 3.40, P < 0.01, effect size = 0.55) than that of females (B(PCS-12) = 4.05, P < 0.001, effect size = 0.78 and B (MCS-12) = 1.16, P > 0.05, effect size = 0.16). There was a clinically significant difference in HRQoL among age groups. Younger men (< 39 years) were likely to have better physical health than older men (> 59 years, B = -5.82, P < 0.05, effect size = 0.66); older women tended to have better mental health (B = 5.62, P < 0.001, effect size = 0.77) than younger women. Chronically-ill women smokers reported clinically significant (B = -3.99, P < 0.001, effect size = 0.66) poorer mental health than women who were non-smokers. Female GPs were more likely to examine female patients than male patients (33% vs. 15%, P < 0.001) and female patients attending female GPs reported better physical health (B = 1.59, P < 0.05, effect size = 0.30). Some of the associations between patient characteristics and SF-12 physical and/or mental component scores were different for men and women. This finding underlines the importance of considering these factors in the management of chronically-ill patients in general practice. The results suggest that chronically ill women attempting to quit smoking may need more psychological support. More quantitative studies are needed to determine the association between GP gender and patient gender in relation to HRQoL.

Layered Plating Specimens For Mechanical Tests

NASA Technical Reports Server (NTRS)

Thompson, Linda B.; Flowers, Cecil E.

1991-01-01

Layered specimens readily made in standard sizes for tensile and other tests of mechanical properties. Standard specimen of metal ordinarily difficult to plate to standard grip thickness or diameter made by augmentation with easier-to-plate material followed by machining to standard size and shape.

A/E/C Graphics Standard: Release 2.0 (formerly titled CAD Drafting Standard)

DTIC Science & Technology

2015-08-01

Tables Table 2-1. ANSI and ISO sheet size comparison . ....................................................................................... 3... Comparison of font types. ......................................................................................................... 45 Table 5-2. Inch...used (ISO A0 may be used for large maps). Table 2-1 lists the standard sizes of ANSI and ISO sheets. Table 2-1. ANSI and ISO sheet size comparison

Meeting the Solid Wood Needs of the Furniture and Cabinet Industries: Standard-Size Hardwood Blanks

Treesearch

Philip A. Araman; Charles J Gatchell; Hugh W. Reynolds

1982-01-01

Standard-size, kiln-dried hardwood blanks (panels) of specified lengths, widths, thicknesses, and qualities can be used instead of lumber to produce rough dimension furniture parts. Standard sizes were determined by analyzing thousands of part requirements from 20 furniture and 12 kitchen cabinet companies. The International Woodworking Machinery and Furniture Supply...

A continuously variable beam-diameter, high-fluence, Q-switched Nd:YAG laser for tattoo removal: comparison of the maximum beam diameter to a standard 4-mm-diameter treatment beam.

PubMed

Bernstein, Eric F; Civiok, Jennifer M

2013-12-01

Laser beam diameter affects the depth of laser penetration. Q-switched lasers tend to have smaller maximum spot sizes than other dermatologic lasers, making beam diameter a potentially more significant factor in treatment outcomes. To compare the clinical effect of using the maximum-size treatment beam available for each delivered fluence during laser tattoo removal to a standard 4-mm-diameter treatment beam. Thirteen tattoos were treated in 12 subjects using a Q-switched Nd:YAG laser equipped with a treatment beam diameter that was adjustable in 1 mm increments and a setting that would enable the maximally achievable diameter ("MAX-ON" setting) with any fluence. Tattoos were randomly bisected and treated on one side with the MAX-ON setting and on the contralateral side with a standard 4-mm-diameter spot ("MAX-OFF" setting). Photographs were taken 8 weeks following each treatment and each half-tattoo was evaluated for clearance on a 10-point scale by physicians blinded to the treatment conditions. Tattoo clearance was greater on the side treated with the MAX-ON setting in a statistically significant manner following the 1st through 4th treatments, with the MAX-OFF treatment site approaching the clearance of the MAX-ON treatment site after the 5th and 6th treatments. This high-energy, Q-switched Nd:YAG laser with a continuously variable spot-size safely and effectively removes tattoos, with greater removal when using a larger spot-size. © 2013 Wiley Periodicals, Inc.

7 CFR 51.2559 - Size classifications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS) United States Standards for Grades of Shelled Pistachio Nuts § 51.2559 Size classifications. (a) The size of pistachio kernels may be specified in connection with the grade in accordance with one of...

Energy Content Estimation by Collegians for Portion Standardized Foods Frequently Consumed in Korea

PubMed Central

Kim, Jin; Lee, Hee Jung; Lee, Hyun Jung; Lee, Sun Ha; Yun, Jee-Young; Choi, Mi-Kyeong

2014-01-01

The purpose of this study is to estimate Korean collegians' knowledge of energy content in the standard portion size of foods frequently consumed in Korea and to investigate the differences in knowledge between gender groups. A total of 600 collegians participated in this study. Participants' knowledge was assessed based on their estimation on the energy content of 30 selected food items with their actual-size photo images. Standard portion size of food was based on 2010 Korean Dietary Reference Intakes, and the percentage of participants who accurately estimated (that is, within 20% of the true value) the energy content of the standard portion size was calculated for each food item. The food for which the most participants provided the accurate estimation was ramyun (instant noodles) (67.7%), followed by cooked rice (57.8%). The proportion of students who overestimated the energy content was highest for vegetables (68.8%) and beverages (68.1%). The proportion of students who underestimated the energy content was highest for grains and starches (42.0%) and fruits (37.1%). Female students were more likely to check energy content of foods that they consumed than male students. From these results, it was concluded that the knowledge on food energy content was poor among collegians, with some gender difference. Therefore, in the future, nutrition education programs should give greater attention to improving knowledge on calorie content and to helping them apply this knowledge in order to develop effective dietary plans. PMID:24527417

Energy content estimation by collegians for portion standardized foods frequently consumed in Korea.

PubMed

Kim, Jin; Lee, Hee Jung; Lee, Hyun Jung; Lee, Sun Ha; Yun, Jee-Young; Choi, Mi-Kyeong; Kim, Mi-Hyun

2014-01-01

The purpose of this study is to estimate Korean collegians' knowledge of energy content in the standard portion size of foods frequently consumed in Korea and to investigate the differences in knowledge between gender groups. A total of 600 collegians participated in this study. Participants' knowledge was assessed based on their estimation on the energy content of 30 selected food items with their actual-size photo images. Standard portion size of food was based on 2010 Korean Dietary Reference Intakes, and the percentage of participants who accurately estimated (that is, within 20% of the true value) the energy content of the standard portion size was calculated for each food item. The food for which the most participants provided the accurate estimation was ramyun (instant noodles) (67.7%), followed by cooked rice (57.8%). The proportion of students who overestimated the energy content was highest for vegetables (68.8%) and beverages (68.1%). The proportion of students who underestimated the energy content was highest for grains and starches (42.0%) and fruits (37.1%). Female students were more likely to check energy content of foods that they consumed than male students. From these results, it was concluded that the knowledge on food energy content was poor among collegians, with some gender difference. Therefore, in the future, nutrition education programs should give greater attention to improving knowledge on calorie content and to helping them apply this knowledge in order to develop effective dietary plans.

Predator-prey Encounter Rates in Turbulent Environments: Consequences of Inertia Effects and Finite Sizes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pecseli, H. L.; Trulsen, J.

2009-10-08

Experimental as well as theoretical studies have demonstrated that turbulence can play an important role for the biosphere in marine environments, in particular also by affecting prey-predator encounter rates. Reference models for the encounter rates rely on simplifying assumptions of predators and prey being described as point particles moving passively with the local flow velocity. Based on simple arguments that can be tested experimentally we propose corrections for the standard expression for the encounter rates, where now finite sizes and Stokes drag effects are included.

An objective Bayesian analysis of a crossover design via model selection and model averaging.

PubMed

Li, Dandan; Sivaganesan, Siva

2016-11-10

Inference about the treatment effect in a crossover design has received much attention over time owing to the uncertainty in the existence of the carryover effect and its impact on the estimation of the treatment effect. Adding to this uncertainty is that the existence of the carryover effect and its size may depend on the presence of the treatment effect and its size. We consider estimation and testing hypothesis about the treatment effect in a two-period crossover design, assuming normally distributed response variable, and use an objective Bayesian approach to test the hypothesis about the treatment effect and to estimate its size when it exists while accounting for the uncertainty about the presence of the carryover effect as well as the treatment and period effects. We evaluate and compare the performance of the proposed approach with a standard frequentist approach using simulated data, and real data. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

The effects of age, viewing distance, display type, font type, colour contrast and number of syllables on the legibility of Korean characters.

PubMed

Kong, Yong-Ku; Lee, Inseok; Jung, Myung-Chul; Song, Young-Woong

2011-05-01

This study evaluated the effects of age (20s and 60s), viewing distance (50 cm, 200 cm), display type (paper, monitor), font type (Gothic, Ming), colour contrast (black letters on white background, white letters on black background) and number of syllables (one, two) on the legibility of Korean characters by using the four legibility measures (minimum letter size for 100% correctness, maximum letter size for 0% correctness, minimum letter size for the least discomfort and maximum letter size for the most discomfort). Ten subjects in each age group read the four letters presented on a slide (letter size varied from 80 pt to 2 pt). Subjects also subjectively rated the reading discomfort of the letters on a 4-point scale (1 = no discomfort, 4 = most discomfort). According to the ANOVA procedure, age, viewing distance and font type significantly affected the four dependent variables (p < 0.05), while the main effect of colour contrast was not statistically significant for any measures. Two-syllable letters had smaller letters than one-syllable letters in the two correctness measures. The younger group could see letter sizes two times smaller than the old group could and the viewing distance of 50 cm showed letters about three times smaller than those at a 200 cm viewing distance. The Gothic fonts were smaller than the Ming fonts. Monitors were smaller than paper for correctness and maximum letter size for the most discomfort. From a comparison of the results for correctness and discomfort, people generally preferred larger letter sizes to those that they could read. The findings of this study may provide basic information for setting a global standard of letter size or font type to improve the legibility of characters written in Korean. STATEMENT OF RELEVANCE: Results obtained in this study will provide basic information and guidelines for setting standards of letter size and font type to improve the legibility of characters written in Korean. Also, the results might offer useful information for people who are working on design of visual displays.

7 CFR 51.2559 - Size classifications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Size classifications. 51.2559 Section 51.2559... STANDARDS) United States Standards for Grades of Shelled Pistachio Nuts § 51.2559 Size classifications. (a... the following size classifications. (1) Jumbo Whole Kernels: 80 percent or more by weight shall be...

7 CFR 51.2559 - Size classifications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Size classifications. 51.2559 Section 51.2559... STANDARDS) United States Standards for Grades of Shelled Pistachio Nuts § 51.2559 Size classifications. (a... the following size classifications. (1) Jumbo Whole Kernels: 80 percent or more by weight shall be...

Effect of display size on utilization of traffic situation display for self-spacing task. [transport aircraft

NASA Technical Reports Server (NTRS)

Abbott, T. S.; Moen, G. C.

1981-01-01

The weather radar cathode ray tube (CRT) is the prime candidate for presenting cockpit display of traffic information (CDTI) in current, conventionally equipped transport aircraft. Problems may result from this, since the CRT size is not optimized for CDTI applications and the CRT is not in the pilot's primary visual scan area. The impact of display size on the ability of pilots to utilize the traffic information to maintain a specified spacing interval behind a lead aircraft during an approach task was studied. The five display sizes considered are representative of the display hardware configurations of airborne weather radar systems. From a pilot's subjective workload viewpoint, even the smallest display size was usable for performing the self spacing task. From a performane viewpoint, the mean spacing values, which are indicative of how well the pilots were able to perform the task, exhibit the same trends, irrespective of display size; however, the standard deviation of the spacing intervals decreased (performance improves) as the display size increased. Display size, therefore, does have a significant effect on pilot performance.

Meta-Analyses of the Effects of Tier 2 Type Reading Interventions in Grades K-3.

PubMed

Wanzek, Jeanne; Vaughn, Sharon; Scammacca, Nancy; Gatlin, Brandy; Walker, Melodee A; Capin, Philip

2016-09-01

This meta-analysis extends previous work on extensive Tier 3 type reading interventions (Wanzek & Vaughn, 2007; Wanzek et al., 2013) to Tier 2 type interventions by examining a non-overlapping set of studies addressing the effects of less extensive reading interventions for students with or at risk for reading difficulties in Grades K-3. We examined the overall effects of these interventions on students' foundational skills, language, and comprehension as well as the intervention features that may be associated with improved outcomes. We conducted four meta-analyses on 72 studies to examine effects on (1) standardized foundational skill measures (mean ES = 0.54), (2) not-standardized foundational skill measures (mean ES = 0.62), (3) standardized language/comprehension measures (mean ES = 0.36), and (4) not-standardized language/comprehension measures (mean ES = 1.02). There were no differences in effects related to intervention type, instructional group size, grade level, intervention implementer, or the number of intervention hours.

7 CFR 51.1859 - Size.

Code of Federal Regulations, 2011 CFR

2011-01-01

... cherry tomatoes and Pyriforme type tomatoes commonly referred to as pear shaped tomatoes, and other... Standards for Fresh Tomatoes 1 Size § 51.1859 Size. (a) The size of tomatoes packed in any standard type... measurement for minimum diameter shall be the largest diameter of the tomato measured at right angles to a...

7 CFR 51.1859 - Size.

Code of Federal Regulations, 2010 CFR

2010-01-01

... cherry tomatoes and Pyriforme type tomatoes commonly referred to as pear shaped tomatoes, and other... Standards for Fresh Tomatoes 1 Size § 51.1859 Size. (a) The size of tomatoes packed in any standard type... measurement for minimum diameter shall be the largest diameter of the tomato measured at right angles to a...

Cognitive-behavioral and pharmacological interventions for premenstrual syndrome or premenstrual dysphoric disorder: a meta-analysis.

PubMed

Kleinstäuber, Maria; Witthöft, Michael; Hiller, Wolfgang

2012-09-01

The current meta-analysis investigates the efficacy of psychotherapeutic interventions and psychopharmacotherapy for premenstrual syndrome (PMS) and premenstrual dysphoric disorder. Based on a multiple-phase literature search, controlled trials were selected according to a priori defined inclusion criteria. Data were extracted on the basis of a standardized coding scheme. The standardized weighted mean difference (random effects model) was used as effect size index. Dependent on outcome, 22 included studies obtained small to medium effect sizes for cognitive-behavioral interventions (range: d(+) = 0.24-0.70) and for serotonergic antidepressants (range: d(+) = 0.29-0.58), at post-assessment. Follow-ups were performed only in studies of cognitive-behavioral interventions (range: d(+) = 0.46-0.74). There was no evidence of a publication bias. For both cognitive-behavioral interventions and serotonergic antidepressants, efficacy in treatment of PMS was found to not be satisfactory. Future research should possibly focus more on a combination of both approaches.

MIQuant – Semi-Automation of Infarct Size Assessment in Models of Cardiac Ischemic Injury

PubMed Central

Esteves, Tiago; de Pina, Maria de Fátima; Guedes, Joana G.; Freire, Ana; Quelhas, Pedro; Pinto-do-Ó, Perpétua

2011-01-01

Background The cardiac regenerative potential of newly developed therapies is traditionally evaluated in rodent models of surgically induced myocardial ischemia. A generally accepted key parameter for determining the success of the applied therapy is the infarct size. Although regarded as a gold standard method for infarct size estimation in heart ischemia, histological planimetry is time-consuming and highly variable amongst studies. The purpose of this work is to contribute towards the standardization and simplification of infarct size assessment by providing free access to a novel semi-automated software tool. The acronym MIQuant was attributed to this application. Methodology/Principal Findings Mice were subject to permanent coronary artery ligation and the size of chronic infarcts was estimated by area and midline-length methods using manual planimetry and with MIQuant. Repeatability and reproducibility of MIQuant scores were verified. The validation showed high correlation (r midline length = 0.981; r area = 0.970 ) and agreement (Bland-Altman analysis), free from bias for midline length and negligible bias of 1.21% to 3.72% for area quantification. Further analysis demonstrated that MIQuant reduced by 4.5-fold the time spent on the analysis and, importantly, MIQuant effectiveness is independent of user proficiency. The results indicate that MIQuant can be regarded as a better alternative to manual measurement. Conclusions We conclude that MIQuant is a reliable and an easy-to-use software for infarct size quantification. The widespread use of MIQuant will contribute towards the standardization of infarct size assessment across studies and, therefore, to the systematization of the evaluation of cardiac regenerative potential of emerging therapies. PMID:21980376

Application of the combinative particle size reduction technology H 42 to produce fast dissolving glibenclamide tablets.

PubMed

Salazar, Jaime; Müller, Rainer H; Möschwitzer, Jan P

2013-07-16

Standard particle size reduction techniques such as high pressure homogenization or wet bead milling are frequently used in the production of nanosuspensions. The need for micronized starting material and long process times are their evident disadvantages. Combinative particle size reduction technologies have been developed to overcome the drawbacks of the standard techniques. The H 42 combinative technology consists of a drug pre-treatment by means of spray-drying followed by standard high pressure homogenization. In the present paper, spray-drying process parameters influencing the diminution effectiveness, such as drug and surfactant concentration, were systematically analyzed. Subsequently, the untreated and pre-treated drug powders were homogenized for 20 cycles at 1500 bar. For untreated, micronized glibenclamide, the particle size analysis revealed a mean particle size of 772 nm and volume-based size distribution values of 2.686 μm (d50%) and 14.423 μm (d90%). The use of pre-treated material (10:1 glibenclamide/docusate sodium salt ratio spray-dried as ethanolic solution) resulted in a mean particle size of 236 nm and volume-based size distribution values of 0.131 μm (d50%) and 0.285 μm (d90%). These results were markedly improved compared to the standard process. The nanosuspensions were further transferred into tablet formulations. Wet granulation, freeze-drying and spray-drying were investigated as downstream methods to produce dry intermediates. Regarding the dissolution rate, the rank order of the downstream processes was as follows: Spray-drying>freeze-drying>wet granulation. The best drug release (90% within 10 min) was obtained for tablets produced with spray-dried nanosuspension containing 2% mannitol as matrix former. In comparison, the tablets processed with micronized glibenclamide showed a drug release of only 26% after 10 min. The H 42 combinative technology could be successfully applied in the production of small drug nanocrystals. A nanosuspension transfer to tablets that maintained the fast dissolution properties of the drug nanocrystals was successfully achieved. Copyright © 2013 Elsevier B.V. All rights reserved.

Discrete and Continuum Approximations for Collective Cell Migration in a Scratch Assay with Cell Size Dynamics.

PubMed

Matsiaka, Oleksii M; Penington, Catherine J; Baker, Ruth E; Simpson, Matthew J

2018-04-01

Scratch assays are routinely used to study the collective spreading of cell populations. In general, the rate at which a population of cells spreads is driven by the combined effects of cell migration and proliferation. To examine the effects of cell migration separately from the effects of cell proliferation, scratch assays are often performed after treating the cells with a drug that inhibits proliferation. Mitomycin-C is a drug that is commonly used to suppress cell proliferation in this context. However, in addition to suppressing cell proliferation, mitomycin-C also causes cells to change size during the experiment, as each cell in the population approximately doubles in size as a result of treatment. Therefore, to describe a scratch assay that incorporates the effects of cell-to-cell crowding, cell-to-cell adhesion, and dynamic changes in cell size, we present a new stochastic model that incorporates these mechanisms. Our agent-based stochastic model takes the form of a system of Langevin equations that is the system of stochastic differential equations governing the evolution of the population of agents. We incorporate a time-dependent interaction force that is used to mimic the dynamic increase in size of the agents. To provide a mathematical description of the average behaviour of the stochastic model we present continuum limit descriptions using both a standard mean-field approximation and a more sophisticated moment dynamics approximation that accounts for the density of agents and density of pairs of agents in the stochastic model. Comparing the accuracy of the two continuum descriptions for a typical scratch assay geometry shows that the incorporation of agent growth in the system is associated with a decrease in accuracy of the standard mean-field description. In contrast, the moment dynamics description provides a more accurate prediction of the evolution of the scratch assay when the increase in size of individual agents is included in the model.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wohlgemuth, J.; Bokria, J.; Gu, X.

Polymeric encapsulation materials may a change size when processed at typical module lamination temperatures. The relief of residual strain, trapped during the manufacture of encapsulation sheet, can affect module performance and reliability. For example, displaced cells and interconnects threaten: cell fracture; broken interconnects (open circuits and ground faults); delamination at interfaces; and void formation. A standardized test for the characterization of change in linear dimensions of encapsulation sheet has been developed and verified. The IEC 62788-1-5 standard quantifies the maximum change in linear dimensions that may occur to allow for process control of size change. Developments incorporated into the Committeemore » Draft (CD) of the standard as well as the assessment of the repeatability and reproducibility of the test method are described here. No pass/fail criteria are given in the standard, rather a repeatable protocol to quantify the change in dimension is provided to aid those working with encapsulation. The round-robin experiment described here identified that the repeatability and reproducibility of measurements is on the order of 1%. Recent refinements to the test procedure to improve repeatability and reproducibility include: the use of a convection oven to improve the thermal equilibration time constant and its uniformity; well-defined measurement locations reduce the effects of sampling size -and location- relative to the specimen edges; a standardized sand substrate may be readily obtained to reduce friction that would otherwise complicate the results; specimen sampling is defined, so that material is examined at known sites across the width and length of rolls; and encapsulation should be examined at the manufacturer’s recommended processing temperature, except when a cross-linking reaction may limit the size change. EVA, for example, should be examined 100 °C, between its melt transition (occurring up to 80 °C) and the onset of cross-linking (often at 100 °C).« less

Responsiveness of Endoscopic Indices of Disease Activity for Crohn's Disease.

PubMed

Khanna, Reena; Zou, GuangYong; Stitt, Larry; Feagan, Brian G; Sandborn, William J; Rutgeerts, Paul; McDonald, John W D; Dubcenco, Elena; Fogel, Ronald; Panaccione, Remo; Jairath, Vipul; Nelson, Sigrid; Shackelton, Lisa M; Huang, Bidan; Zhou, Qian; Robinson, Anne M; Levesque, Barrett G; D'Haens, Geert

2017-10-01

The Crohn's Disease Endoscopic Index of Severity (CDEIS) and the Simple Endoscopic Score for Crohn's Disease (SES-CD) are commonly used to assess Crohn's disease (CD) activity; however neither instrument is fully validated. We evaluated the responsiveness to change of the SES-CD and CDEIS using data from a trial of adalimumab, a drug therapy of known efficacy. Paired video recordings (N=112) of colonoscopies (baseline and week 8-12) obtained from patients with CD who participated in a trial of adalimumab therapy were reviewed in random order, in duplicate, by four central readers (56 pairs of videos by 2 groups of readers). Responsiveness of the SES-CD and the CDEIS was evaluated by comparing correlations between the observed and pre-specified predictions of change scores for these endoscopic indices with a global endoscopic evaluation of severity (GELS), a patient reported outcome (PRO2), and the Crohn's disease activity index (CDAI), and by calculation of the standardized effect size, and Guyatt's Responsiveness statistic (GRS) using 2 definitions of change; (1) treatment assignment and (2) an absolute change in total PRO2 of 50. The potential application of effect size estimates was demonstrated by calculating hypothetical sample sizes for comparing two independent groups. The impact of removing stenosis as an index item and adjusting for the number of segments observed was also assessed. Changes in both endoscopic instruments and the GELS were highly correlated. The SES-CD displayed numerically higher effect sizes for both definitions of change. The standardized effect size and GRS estimates (95% confidence interval) for the SES-CD based on treatment assignment were 0.84 (0.53, 1.15) and 0.79 (0.48, 1.09). Corresponding values for the CDEIS were 0.72 (0.42, 1.02) and 0.75 (0.45, 1.06). The standardized effect size and GRS estimates for the SES-CD based on an absolute change in total PRO2 of 50 points or greater were 0.76 (0.49, 1.02) and 0.93 (0.64, 1.21). Corresponding values for CDEIS were 0.70 (0.44, 0.97), 0.83 (0.55, 1.10). Removal of stenosis as an index item and adjusting for observed segments did not improve responsiveness estimates. Although both the SES-CD and CDEIS are valid measures of endoscopic disease activity that are moderately responsive to changes in endoscopic disease activity, the SES-CD displayed numerically greater responsiveness in this data set.

Design and development of anthropometric device for the standardization of sizes of knee-ankle-foot orthoses.

PubMed

Dwivedi, M; Shetty, K D; Nath, L Narendra

2009-01-01

An anthropometric device (AD) was designed and developed to collect data on foot and knee of locomotor disabled people. The aim was to standardize the sizes of knee-ankle-foot orthoses (KAFOs) in a standard modular form so that they can be mass produced to cater for fitting to a large number of locomotor disabled people. The anthropometric data collected on large numbers of locomotor disabled people were processed, with the help of a computer programme, to arrive at standard sizes for three modules, i.e. a foot plate (seven sizes), knee pieces (six sizes) and a lateral upright in a universal size. These modules were produced by plastic injection moulding and compression moulding processes using glass-reinforced polypropylene. KAFOs were assembled and fitted to locomotor disabled people. Feedback obtained was encouraging and this vindicated the concept, design and utility of the AD.

Parameter recovery, bias and standard errors in the linear ballistic accumulator model.

PubMed

Visser, Ingmar; Poessé, Rens

2017-05-01

The linear ballistic accumulator (LBA) model (Brown & Heathcote, , Cogn. Psychol., 57, 153) is increasingly popular in modelling response times from experimental data. An R package, glba, has been developed to fit the LBA model using maximum likelihood estimation which is validated by means of a parameter recovery study. At sufficient sample sizes parameter recovery is good, whereas at smaller sample sizes there can be large bias in parameters. In a second simulation study, two methods for computing parameter standard errors are compared. The Hessian-based method is found to be adequate and is (much) faster than the alternative bootstrap method. The use of parameter standard errors in model selection and inference is illustrated in an example using data from an implicit learning experiment (Visser et al., , Mem. Cogn., 35, 1502). It is shown that typical implicit learning effects are captured by different parameters of the LBA model. © 2017 The British Psychological Society.

A proton irradiation test facility for space research in Ankara, Turkey

NASA Astrophysics Data System (ADS)

Gencer, Ayşenur; Yiǧitoǧlu, Merve; Bilge Demirköz, Melahat; Efthymiopoulos, Ilias

2016-07-01

Space radiation often affects the electronic components' performance during the mission duration. In order to ensure reliable performance, the components must be tested to at least the expected dose that will be received in space, before the mission. Accelerator facilities are widely used for such irradiation tests around the world. Turkish Atomic Energy Authority (TAEA) has a 15MeV to 30MeV variable proton cyclotron in Ankara and the facility's main purpose is to produce radioisotopes in three different rooms for different target systems. There is also an R&D room which can be used for research purposes. This paper will detail the design and current state of the construction of a beamline to perform Single Event Effect (SEE) tests in Ankara for the first time. ESA ESCC No.25100 Standard Single Event Effect Test Method and Guidelines is being considered for these SEE tests. The proton beam kinetic energy must be between 20MeV and 200MeV according to the standard. While the proton energy is suitable for SEE tests, the beam size must be 15.40cm x 21.55cm and the flux must be between 10 ^{5} p/cm ^{2}/s to at least 10 ^{8} p/cm ^{2}/s according to the standard. The beam size at the entrance of the R&D room is mm-sized and the current is variable between 10μA and 1.2mA. Therefore, a defocusing beam line has been designed to enlarge the beam size and reduce the flux value. The beam line has quadrupole magnets to enlarge the beam size and the collimators and scattering foils are used for flux reduction. This facility will provide proton fluxes between 10 ^{7} p/cm ^{2}/s and 10 ^{10} p/cm ^{2}/s for the area defined in the standard when completed. Also for testing solar cells developed for space, the proton beam energy will be lowered below 10MeV. This project has been funded by Ministry of Development in Turkey and the beam line construction will finish in two years and SEE tests will be performed for the first time in Turkey.

Effect of brewing technique and particle size of the ground coffee on sensory profiling of brewed Dampit robusta coffee

NASA Astrophysics Data System (ADS)

Fibrianto, K.; Febryana, Y. R.; Wulandari, E. S.

2018-03-01

This study aimed to assess the effect of different brewing techniques with the use of appropriate particle size standard of Apresiocoffee cafe (Category 1) compared to the difference brewing techniques with the use of the same particle size (coarse) (Category 2) of the sensory attributes Dampit robusta coffee. Rate-All-That-Apply (RATA) method was applied in this study, and the data was analysed by ANOVA General Linier Model (GLM) on Minitab-16. The influence of brewing techniques (tubruk, French-press, drips, syphon) and type of particle size ground coffee (fine, medium, coarse) were sensorially observed. The result showed that only two attributes, including bitter taste, and astringent/rough-mouth-feel were affected by brewing techniques (p-value <0.05) as observed for brewed coarse coffee powder.

Ultrasonic frequency selection for aqueous fine cleaning

NASA Technical Reports Server (NTRS)

Becker, Joann F.

1995-01-01

A study was conducted to evaluate ultrasonic cleaning systems for precision cleaning effectiveness for oxygen service hardware. This evaluation was specific for Rocketdyne Division of Rockwell Aerospace alloys and machining soils. Machining lubricants and hydraulic fluid were applied as soils to standardized complex test specimens designed to simulate typical hardware. The study consisted of tests which included 20, 25, 30, 40, 50, and 65 kHz ultrasonic cleaning systems. Two size categories of cleaning systems were evaluated, 3- to 10-gal laboratory size tanks and 35- to 320-gal industrial size tanks. The system properties of cavitation, frequency vs. cleaning effectiveness, the two types of transducers, and the power level of the system vs. size of the cleaning tank were investigated. The data obtained from this study was used to select the ultrasonic tanks for the aqueous fine clean facility installed at Rocketdyne.

Ultrasonic frequency selection for aqueous fine cleaning

NASA Technical Reports Server (NTRS)

Becker, Joann F.

1994-01-01

A study was conducted to evaluate ultrasonic cleaning systems for precision cleaning effectiveness for oxygen service hardware. This evaluation was specific for Rocketdyne Div. of Rockwell Aerospace alloys and machining soils. Machining lubricants and hydraulic fluid were applied as soils to standardized complex test specimens designed to simulate typical hardware. The study consisted of tests which included 20, 25, 30, 40, 50, and 65 kHz ultrasonic cleaning systems. Two size categories of cleaning systems were evaluated, 3- to 10-gal laboratory size tanks and 35- to 320-gal industrial size tanks. The system properties of cavitation; frequency vs. cleaning effectiveness; the two types of transducers; and the power level of the system vs. size of the cleaning tank were investigated. The data obtained from this study was used to select the ultrasonic tanks for the aqueous fine clean facility installed at Rocketdyne.

Keeping an eye on the truth? Pupil size changes associated with recognition memory.

PubMed

Heaver, Becky; Hutton, Sam B

2011-05-01

During recognition memory tests participants' pupils dilate more when they view old items compared to novel items. We sought to replicate this "pupil old/new effect" and to determine its relationship to participants' responses. We compared changes in pupil size during recognition when participants were given standard recognition memory instructions, instructions to feign amnesia, and instructions to report all items as new. Participants' pupils dilated more to old items compared to new items under all three instruction conditions. This finding suggests that the increase in pupil size that occurs when participants encounter previously studied items is not under conscious control. Given that pupil size can be reliably and simply measured, the pupil old/new effect may have potential in clinical settings as a means for determining whether patients are feigning memory loss.

How long does a mindfulness-based stress reduction program need to be? A review of class contact hours and effect sizes for psychological distress.

PubMed

Carmody, James; Baer, Ruth A

2009-06-01

The mindfulness-based stress reduction (MBSR) program was designed to be long enough for participants to grasp the principles of self-regulation through mindfulness and develop skill and autonomy in mindfulness practice. It traditionally consists of 26 hours of session time including eight classes of 2-1/2 hours and an all-day class. The circumstances of some groups exclude them from participating in this standard form and a number of trials have evaluated programs with abbreviated class time. If lower program time demands can lead to similar outcomes in psychological functioning, it would support their utility in these settings and might lead to greater participation. However, the effect of variation in class hours on outcomes has not been systematically studied. To obtain preliminary information related to this question we examined effect sizes for psychological outcome variables in published studies of MBSR, some of which had adapted the standard number of class hours. The correlation between mean effect size and number of in-class hours was nonsignificant for both clinical and nonclinical samples and suggests that adaptations that include less class time may be worthwhile for populations for whom reduction of psychological distress is an important goal and for whom longer time commitment may be a barrier to their ability or willingness to participate. However, the standard MBSR format has accrued the most empirical support for its efficacy and session time may be important to the development of other kinds of program outcomes. The result points to the importance of empirical studies systematically examining this question. Copyright 2009 Wiley Periodicals, Inc.

Effect of initial shock wave voltage on shock wave lithotripsy-induced lesion size during step-wise voltage ramping.

PubMed

Connors, Bret A; Evan, Andrew P; Blomgren, Philip M; Handa, Rajash K; Willis, Lynn R; Gao, Sujuan

2009-01-01

To determine if the starting voltage in a step-wise ramping protocol for extracorporeal shock wave lithotripsy (SWL) alters the size of the renal lesion caused by the SWs. To address this question, one kidney from 19 juvenile pigs (aged 7-8 weeks) was treated in an unmodified Dornier HM-3 lithotripter (Dornier Medical Systems, Kennesaw, GA, USA) with either 2000 SWs at 24 kV (standard clinical treatment, 120 SWs/min), 100 SWs at 18 kV followed by 2000 SWs at 24 kV or 100 SWs at 24 kV followed by 2000 SWs at 24 kV. The latter protocols included a 3-4 min interval, between the 100 SWs and the 2000 SWs, used to check the targeting of the focal zone. The kidneys were removed at the end of the experiment so that lesion size could be determined by sectioning the entire kidney and quantifying the amount of haemorrhage in each slice. The average parenchymal lesion for each pig was then determined and a group mean was calculated. Kidneys that received the standard clinical treatment had a mean (sem) lesion size of 3.93 (1.29)% functional renal volume (FRV). The mean lesion size for the 18 kV ramping group was 0.09 (0.01)% FRV, while lesion size for the 24 kV ramping group was 0.51 (0.14)% FRV. The lesion size for both of these groups was significantly smaller than the lesion size in the standard clinical treatment group. The data suggest that initial voltage in a voltage-ramping protocol does not correlate with renal damage. While voltage ramping does reduce injury when compared with SWL with no voltage ramping, starting at low or high voltage produces lesions of the same approximate size. Our findings also suggest that the interval between the initial shocks and the clinical dose of SWs, in our one-step ramping protocol, is important for protecting the kidney against injury.

Comparing the effects of whole-body vibration to standard exercise in ambulatory people with Multiple Sclerosis: a randomised controlled feasibility study.

PubMed

Uszynski, Marcin Kacper; Purtill, Helen; Donnelly, Alan; Coote, Susan

2016-07-01

This study aimed firstly to investigate the feasibility of the study protocol and outcome measures, secondly to obtain data in order to inform the power calculations for a larger randomised controlled trial, and finally to investigate if whole-body vibration (WBV) is more effective than the same duration and intensity of standard exercises (EXE) in people with Multiple Sclerosis (PwMS). Randomised controlled feasibility study. Outpatient MS centre. Twenty seven PwMS (age mean (SD) 48.1 (11.2)) with minimal gait impairments. Twelve weeks of WBV or standard EXE, three times weekly. Participants were measured with isokinetic muscle strength, vibration threshold, Timed Up and Go test (TUG), Mini-BESTest (MBT), 6 Minute Walk test (6MWT), Multiple Sclerosis Impact Scale 29 (MSIS 29), Modified Fatigue Impact Scale (MFIS) and Verbal Analogue scale for sensation (VAS) pre and post 12 week intervention. WBV intervention was found feasible with low drop-out rate (11.1%) and high compliance (90%). Data suggest that a sample of 52 in each group would be sufficient to detect a moderate effect size, with 80% power and 5% significance for 6 minute walk test. Large effect sizes in favour of standard exercise were found for vibration threshold at 5th metatarsophalangeal joint and heel (P=0.014, r= 0.5 and P=0.005, r=0.56 respectively). No between group differences were found for muscle strength, balance or gait (P>0.05). Data suggest that the protocol is feasible, there were no adverse effects. A trial including 120 people would be needed to detect an effect on walking endurance. © The Author(s) 2015.

Magnetic resonance imaging in experimental stroke and comparison with histology: systematic review and meta-analysis.

PubMed

Milidonis, Xenios; Marshall, Ian; Macleod, Malcolm R; Sena, Emily S

2015-03-01

Because the new era of preclinical stroke research demands improvements in validity and generalizability of findings, moving from single site to multicenter studies could be pivotal. However, the conduct of magnetic resonance imaging (MRI) in stroke remains ill-defined. We sought to assess the variability in the use of MRI for evaluating lesions post stroke and to examine the possibility as an alternative to gold standard histology for measuring the infarct size. We identified animal studies of ischemic stroke reporting lesion sizes using MRI. We assessed the degree of heterogeneity and reporting of scanning protocols, postprocessing methods, study design characteristics, and study quality. Studies performing histological evaluation of infarct size were further selected to compare with corresponding MRI using meta-regression. Fifty-four articles undertaking a total of 78 different MRI scanning protocols met the inclusion criteria. T2-weighted imaging was most frequently used (83% of the studies), followed by diffusion-weighted imaging (43%). Reporting of the imaging parameters was adequate, but heterogeneity between studies was high. Twelve studies assessed the infarct size using both MRI and histology at corresponding time points, with T2-weighted imaging-based treatment effect having a significant positive correlation with histology (; P<0.001). Guidelines for standardized use and reporting of MRI in preclinical stroke are urgently needed. T2-weighted imaging could be used as an effective in vivo alternative to histology for estimating treatment effects based on the extent of infarction; however, additional studies are needed to explore the effect of individual parameters. © 2015 American Heart Association, Inc.

Got power? A systematic review of sample size adequacy in health professions education research.

PubMed

Cook, David A; Hatala, Rose

2015-03-01

Many education research studies employ small samples, which in turn lowers statistical power. We re-analyzed the results of a meta-analysis of simulation-based education to determine study power across a range of effect sizes, and the smallest effect that could be plausibly excluded. We systematically searched multiple databases through May 2011, and included all studies evaluating simulation-based education for health professionals in comparison with no intervention or another simulation intervention. Reviewers working in duplicate abstracted information to calculate standardized mean differences (SMD's). We included 897 original research studies. Among the 627 no-intervention-comparison studies the median sample size was 25. Only two studies (0.3%) had ≥80% power to detect a small difference (SMD > 0.2 standard deviations) and 136 (22%) had power to detect a large difference (SMD > 0.8). 110 no-intervention-comparison studies failed to find a statistically significant difference, but none excluded a small difference and only 47 (43%) excluded a large difference. Among 297 studies comparing alternate simulation approaches the median sample size was 30. Only one study (0.3%) had ≥80% power to detect a small difference and 79 (27%) had power to detect a large difference. Of the 128 studies that did not detect a statistically significant effect, 4 (3%) excluded a small difference and 91 (71%) excluded a large difference. In conclusion, most education research studies are powered only to detect effects of large magnitude. For most studies that do not reach statistical significance, the possibility of large and important differences still exists.

Gear and seasonal bias associated with abundance and size structure estimates for lentic freshwater fishes

USGS Publications Warehouse

Fischer, Jesse R.; Quist, Michael C.

2014-01-01

All freshwater fish sampling methods are biased toward particular species, sizes, and sexes and are further influenced by season, habitat, and fish behavior changes over time. However, little is known about gear-specific biases for many common fish species because few multiple-gear comparison studies exist that have incorporated seasonal dynamics. We sampled six lakes and impoundments representing a diversity of trophic and physical conditions in Iowa, USA, using multiple gear types (i.e., standard modified fyke net, mini-modified fyke net, sinking experimental gill net, bag seine, benthic trawl, boat-mounted electrofisher used diurnally and nocturnally) to determine the influence of sampling methodology and season on fisheries assessments. Specifically, we describe the influence of season on catch per unit effort, proportional size distribution, and the number of samples required to obtain 125 stock-length individuals for 12 species of recreational and ecological importance. Mean catch per unit effort generally peaked in the spring and fall as a result of increased sampling effectiveness in shallow areas and seasonal changes in habitat use (e.g., movement offshore during summer). Mean proportional size distribution decreased from spring to fall for white bass Morone chrysops, largemouth bass Micropterus salmoides, bluegill Lepomis macrochirus, and black crappie Pomoxis nigromaculatus, suggesting selectivity for large and presumably sexually mature individuals in the spring and summer. Overall, the mean number of samples required to sample 125 stock-length individuals was minimized in the fall with sinking experimental gill nets, a boat-mounted electrofisher used at night, and standard modified nets for 11 of the 12 species evaluated. Our results provide fisheries scientists with relative comparisons between several recommended standard sampling methods and illustrate the effects of seasonal variation on estimates of population indices that will be critical to the future development of standardized sampling methods for freshwater fish in lentic ecosystems.

How large are the consequences of covariate imbalance in cluster randomized trials: a simulation study with a continuous outcome and a binary covariate at the cluster level.

PubMed

Moerbeek, Mirjam; van Schie, Sander

2016-07-11

The number of clusters in a cluster randomized trial is often low. It is therefore likely random assignment of clusters to treatment conditions results in covariate imbalance. There are no studies that quantify the consequences of covariate imbalance in cluster randomized trials on parameter and standard error bias and on power to detect treatment effects. The consequences of covariance imbalance in unadjusted and adjusted linear mixed models are investigated by means of a simulation study. The factors in this study are the degree of imbalance, the covariate effect size, the cluster size and the intraclass correlation coefficient. The covariate is binary and measured at the cluster level; the outcome is continuous and measured at the individual level. The results show covariate imbalance results in negligible parameter bias and small standard error bias in adjusted linear mixed models. Ignoring the possibility of covariate imbalance while calculating the sample size at the cluster level may result in a loss in power of at most 25 % in the adjusted linear mixed model. The results are more severe for the unadjusted linear mixed model: parameter biases up to 100 % and standard error biases up to 200 % may be observed. Power levels based on the unadjusted linear mixed model are often too low. The consequences are most severe for large clusters and/or small intraclass correlation coefficients since then the required number of clusters to achieve a desired power level is smallest. The possibility of covariate imbalance should be taken into account while calculating the sample size of a cluster randomized trial. Otherwise more sophisticated methods to randomize clusters to treatments should be used, such as stratification or balance algorithms. All relevant covariates should be carefully identified, be actually measured and included in the statistical model to avoid severe levels of parameter and standard error bias and insufficient power levels.

Online purchases of an expanded range of condom sizes in comparison to current dimensional requirements allowable by US national standards.

PubMed

Cecil, Michael; Warner, Lee; Siegler, Aaron J

2013-11-01

Across studies, 35-50% of men describe condoms as fitting poorly. Rates of condom use may be inhibited in part due to the inaccessibility of appropriately sized condoms. As regulated medical devices, condom sizes conform to national standards such as those developed by the American Society for Testing and Materials (ASTM) or international standards such as those developed by the International Organisation for Standardisation (ISO). We describe the initial online sales experience of an expanded range of condom sizes and assess uptake in relation to the current required standard dimensions of condoms. Data regarding the initial 1000 sales of an expanded range of condom sizes in the United Kingdom were collected from late 2011 through to early 2012. Ninety-five condom sizes, comprising 14 lengths (83-238mm) and 12 widths (41-69mm), were available. For the first 1000 condom six-pack units that were sold, a total of 83 of the 95 unique sizes were purchased, including all 14 lengths and 12 widths, and both the smallest and largest condoms. Initial condom purchases were made by 572 individuals from 26 countries. Only 13.4% of consumer sales were in the ASTM's allowable range of sizes. These initial sales data suggest consumer interest in an expanded choice of condom sizes that fall outside the range currently allowable by national and international standards organisations.

Effect of field-of-view size on gray values derived from cone-beam computed tomography compared with the Hounsfield unit values from multidetector computed tomography scans.

PubMed

Shokri, Abbas; Ramezani, Leila; Bidgoli, Mohsen; Akbarzadeh, Mahdi; Ghazikhanlu-Sani, Karim; Fallahi-Sichani, Hamed

2018-03-01

This study aimed to evaluate the effect of field-of-view (FOV) size on the gray values derived from conebeam computed tomography (CBCT) compared with the Hounsfield unit values from multidetector computed tomography (MDCT) scans as the gold standard. A radiographic phantom was designed with 4 acrylic cylinders. One cylinder was filled with distilled water, and the other 3 were filled with 3 types of bone substitute: namely, Nanobone, Cenobone, and Cerabone. The phantom was scanned with 2 CBCT systems using 2 different FOV sizes, and 1 MDCT system was used as the gold standard. The mean gray values (MGVs) of each cylinder were calculated in each imaging protocol. In both CBCT systems, significant differences were noted in the MGVs of all materials between the 2 FOV sizes ( P <.05) except for Cerabone in the Cranex3D system. Significant differences were found in the MGVs of each material compared with the others in both FOV sizes for each CBCT system. No significant difference was seen between the Cranex3D CBCT system and the MDCT system in the MGVs of bone substitutes on images obtained with a small FOV. The size of the FOV significantly changed the MGVs of all bone substitutes, except for Cerabone in the Cranex3D system. Both CBCT systems had the ability to distinguish the 3 types of bone substitutes based on a comparison of their MGVs. The Cranex3D CBCT system used with a small FOV had a significant correlation with MDCT results.

7 CFR 51.1406 - Sample for grade or size determination.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., AND STANDARDS) United States Standards for Grades of Pecans in the Shell 1 Sample for Grade Or Size Determination § 51.1406 Sample for grade or size determination. Each sample shall consist of 100 pecans. The...

A Standardized Mean Difference Effect Size for Multiple Baseline Designs across Individuals

ERIC Educational Resources Information Center

Hedges, Larry V.; Pustejovsky, James E.; Shadish, William R.

2013-01-01

Single-case designs are a class of research methods for evaluating treatment effects by measuring outcomes repeatedly over time while systematically introducing different condition (e.g., treatment and control) to the same individual. The designs are used across fields such as behavior analysis, clinical psychology, special education, and…

The repeatability of mean defect with size III and size V standard automated perimetry.

PubMed

Wall, Michael; Doyle, Carrie K; Zamba, K D; Artes, Paul; Johnson, Chris A

2013-02-15

The mean defect (MD) of the visual field is a global statistical index used to monitor overall visual field change over time. Our goal was to investigate the relationship of MD and its variability for two clinically used strategies (Swedish Interactive Threshold Algorithm [SITA] standard size III and full threshold size V) in glaucoma patients and controls. We tested one eye, at random, for 46 glaucoma patients and 28 ocularly healthy subjects with Humphrey program 24-2 SITA standard for size III and full threshold for size V each five times over a 5-week period. The standard deviation of MD was regressed against the MD for the five repeated tests, and quantile regression was used to show the relationship of variability and MD. A Wilcoxon test was used to compare the standard deviations of the two testing methods following quantile regression. Both types of regression analysis showed increasing variability with increasing visual field damage. Quantile regression showed modestly smaller MD confidence limits. There was a 15% decrease in SD with size V in glaucoma patients (P = 0.10) and a 12% decrease in ocularly healthy subjects (P = 0.08). The repeatability of size V MD appears to be slightly better than size III SITA testing. When using MD to determine visual field progression, a change of 1.5 to 4 decibels (dB) is needed to be outside the normal 95% confidence limits, depending on the size of the stimulus and the amount of visual field damage.

Identification of different shapes, colors and sizes of standard oral dosage forms in diabetes type 2 patients-A pilot study.

PubMed

Stegemann, Sven; Riedl, Regina; Sourij, Harald

2017-01-30

The clear identification of drug products by the patients is essential for a safe and effective medication management. In order to understand the impact of shape, size and color on medication identification a study was performed in subjects with type 2 diabetes mellitus (T2D). Ten model drugs differentiated by shape, size and color were evaluated using a mixed method of medication schedule preparation by the participants followed by a semi-structured interview. Detection times were fastest for the large round tablet shape and the bi-chromatic forms. Larger size was easier to identify than the smaller sizes except for the bi-chromatic forms. The shape was the major source of errors, followed by the size and the color dimension. The results from this study suggests that color as a single dimension are perceived more effectively by subjects with T2D compared to shape and size, which requires a more demanding processing of three dimension and is dependent on the perspective. Copyright © 2016 Elsevier B.V. All rights reserved.

A Cost-effective and Reliable Method to Predict Mechanical Stress in Single-use and Standard Pumps

PubMed Central

Dittler, Ina; Dornfeld, Wolfgang; Schöb, Reto; Cocke, Jared; Rojahn, Jürgen; Kraume, Matthias; Eibl, Dieter

2015-01-01

Pumps are mainly used when transferring sterile culture broths in biopharmaceutical and biotechnological production processes. However, during the pumping process shear forces occur which can lead to qualitative and/or quantitative product loss. To calculate the mechanical stress with limited experimental expense, an oil-water emulsion system was used, whose suitability was demonstrated for drop size detections in bioreactors1. As drop breakup of the oil-water emulsion system is a function of mechanical stress, drop sizes need to be counted over the experimental time of shear stress investigations. In previous studies, the inline endoscopy has been shown to be an accurate and reliable measurement technique for drop size detections in liquid/liquid dispersions. The aim of this protocol is to show the suitability of the inline endoscopy technique for drop size measurements in pumping processes. In order to express the drop size, the Sauter mean diameter d32 was used as the representative diameter of drops in the oil-water emulsion. The results showed low variation in the Sauter mean diameters, which were quantified by standard deviations of below 15%, indicating the reliability of the measurement technique. PMID:26274765

Effects of Exercise on Mild-to-Moderate Depressive Symptoms in the Postpartum Period: A Meta-analysis.

PubMed

McCurdy, Ashley P; Boulé, Normand G; Sivak, Allison; Davenport, Margie H

2017-06-01

To examine the influence of exercise on depressive symptoms and the prevalence of depression in the postpartum period. A structured search of MEDLINE, EMBASE, CINAHL, Sport Discus, Ovid's All EBM Reviews, and ClinicalTrials.gov databases was performed with dates from the beginning of the databases until June 16, 2016. The search combined keywords and MeSH-like terms including, but not limited to, "exercise," "postpartum," "depression," and "randomized controlled trial." Randomized controlled trials comparing postpartum exercise (structured, planned, repetitive physical activity) with the standard care for which outcomes assessing depressive symptoms or depressive episodes (as defined by trial authors) were assessed. Trials were identified as prevention trials (women from the general postpartum population) or treatment trials (women were classified as having depression by the trial authors). Effect sizes with 95% confidence intervals (CIs) were calculated using Hedges' g method and standardized mean differences in postintervention depression outcomes were pooled using a random-effects model. Across all 16 trials (1,327 women), the pooled standardized mean difference was -0.34 (95% CI -0.50 to -0.19, I=37%), suggesting a small effect of exercise among all postpartum women on depressive symptoms. Among the 10 treatment trials, a moderate effect size of exercise on depressive symptoms was found (standardized mean difference-0.48, 95% CI -0.73 to -0.22, I=42%). In six prevention trials, a small effect (standardized mean difference-0.22, 95% CI -0.36 to -0.08, I=2%) was found. In women with depression preintervention, exercise increased the odds of resolving depression postintervention by 54% (odds ratio 0.46, Mantel-Haenszel method, 95% CI 0.25-0.84, I=0%). The trials included in this meta-analysis were small and some had methodologic limitations. Light-to-moderate intensity aerobic exercise improves mild-to-moderate depressive symptoms and increases the likelihood that mild-to-moderate depression will resolve.

Full-field Strain Methods for Investigating Failure Mechanisms in Triaxial Braided Composites

NASA Technical Reports Server (NTRS)

Littell, Justin D.; Binienda, Wieslaw K.; Goldberg, Robert K.; Roberts, Gary D.

2008-01-01

Composite materials made with triaxial braid architecture and large tow size carbon fibers are beginning to be used in many applications, including composite aircraft and engine structures. Recent advancements in braiding technology have led to commercially viable manufacturing approaches for making large structures with complex shape. Although the large unit cell size of these materials is an advantage for manufacturing efficiency, the fiber architecture presents some challenges for materials characterization, design, and analysis. In some cases, the static load capability of structures made using these materials has been higher than expected based on material strength properties measured using standard coupon tests. A potential problem with using standard tests methods for these materials is that the unit cell size can be an unacceptably large fraction of the specimen dimensions. More detailed investigation of deformation and failure processes in large unit cell size triaxial braid composites is needed to evaluate the applicability of standard test methods for these materials and to develop alternative testing approaches. In recent years, commercial equipment has become available that enables digital image correlation to be used on a more routine basis for investigation of full field 3D deformation in materials and structures. In this paper, some new techniques that have been developed to investigate local deformation and failure using digital image correlation techniques are presented. The methods were used to measure both local and global strains during standard straight-sided coupon tensile tests on composite materials made with 12 and 24 k yarns and a 0/+60/-60 triaxial braid architecture. Local deformation and failure within fiber bundles was observed, and this local failure had a significant effect on global stiffness and strength. The matrix material had a large effect on local damage initiation for the two matrix materials used in this investigation. Premature failure in regions of the unit cell near the edge of the straight-sided specimens was observed for transverse tensile tests in which the braid axial fibers were perpendicular to the specimen axis and the bias fibers terminated on the cut edges in the specimen gage section. This edge effect is one factor that could contribute to a measured strength that is lower than the actual material strength in a structure without edge effects.

Modeling single event induced crosstalk in nanometer technologies

NASA Astrophysics Data System (ADS)

Boorla, Vijay K.

Radiation effects become more important in combinational logic circuits with newer technologies. When a high energetic particle strikes at the sensitive region within the combinational logic circuit a voltage pulse called Single Event Transient is created. Recently, researchers reported Single Event Crosstalk because of increasing coupling effects. In this work, the closed form expression for SE crosstalk noise is formulated for the first time. For all calculations, 4-pi model is used in this work. The crosstalk model uses a reduced transfer function between aggressor coupling node and victim node to reduce information loss. Aggressor coupling node waveform is obtained and then applied to transfer function between the coupling node and the victim output to obtain victim noise voltage. This work includes both effect of passive aggressor loading on victim and victim loading on aggressor by considering resistive shielding effect. Noise peak expressions derived in this work show very good results in comparison to HSPICE results. Results show that average error for noise peak is 3.794% while allowing for very fast analysis. Once the SE crosstalk noise is calculated, one can hire mitigation techniques such as driver sizing. A standard DTMOS technique along with sizing is proposed in this work to mitigate SE crosstalk. This combined approach can saves in some areas compared to driver sizing alone. Key Words: Crosstalk Noise, Closed Form Modeling, Standard DTMOS

Arthritis self-efficacy scale scores in knee osteoarthritis: a systematic review and meta-analysis comparing arthritis self-management education with or without exercise.

PubMed

Brand, Emily; Nyland, John; Henzman, Cameron; McGinnis, Mark

2013-12-01

Systematic literature review and meta-analysis. To evaluate studies that used arthritis self-management education alone or with exercise to improve Arthritis Self-Efficacy Scale scores of patients with knee osteoarthritis. Increasing self-efficacy may improve patient knee osteoarthritis symptom management and function. MEDLINE (1946-March 2013), CINAHL (1981-March 2013), and PsycINFO (1967-March 2013) databases were searched. Twenty-four studies, including 3163 subjects (women, n = 2547 [80.5%]; mean ± SD age, 65.3 ± 6.5 years), met the inclusion criteria. A meta-analysis was performed to compare the standardized mean difference effect sizes (Cohen d) of randomized controlled studies that used the Arthritis Self-Efficacy Scale pain (13 studies, n = 1906), other symptoms (13 studies, n = 1957), and function (5 studies, n = 399) subscales. Cohen d effect sizes were also calculated for cohort studies that used the Arthritis Self-Efficacy Scale pain (10 studies, n = 1035), other symptoms (9 studies, n = 913), and function (3 studies, n = 141) subscales. Both randomized controlled studies and cohort studies were grouped by intervention type (intervention 1, arthritis self-management education alone; intervention 2, arthritis self-management education with exercise), and effect sizes were compared (Mann-Whitney U tests, P<.05). Interventions that used arthritis self-management education with exercise displayed higher methodological quality scale scores (76.8 ± 13.1 versus 61.6 ± 19.6, P = .03). Statistically significant standardized effect-size differences between intervention 1 and intervention 2 were not observed. Small to moderate effect sizes were observed regardless of whether the intervention included exercise. Exercise interventions used in conjunction with arthritis self-management education programs need to be developed to better enhance the self-efficacy of patients with knee osteoarthritis. Therapy, level 2b-.

Laboratory evaluation of airborne particulate control treatments for simulated aircraft crash recovery operations involving carbon fiber composite materials.

PubMed

Ferreri, Matthew; Slagley, Jeremy; Felker, Daniel

2015-01-01

This study compared four treatment protocols to reduce airborne composite fiber particulates during simulated aircraft crash recovery operations. Four different treatments were applied to determine effectiveness in reducing airborne composite fiber particulates as compared to a "no treatment" protocol. Both "gold standard" gravimetric methods and real-time instruments were used to describe mass per volume concentration, particle size distribution, and surface area. The treatment protocols were applying water, wetted water, wax, or aqueous film-forming foam (AFFF) to both burnt and intact tickets of aircraft composite skin panels. The tickets were then cut using a small high-speed rotary tool to simulate crash recovery operations. Aerosol test chamber. None. Airborne particulate control treatments. Measures included concentration units of milligrams per cubic meter of air, particle size distribution as described by both count median diameter and mass median diameter and geometric standard deviation of particles in micrometers, and surface area concentration in units of square micrometers per cubic centimeter. Finally, a Monte Carlo simulation was run on the particle size distribution results. Comparison was made via one-way analysis of variance. A significant difference (p < 0.0001) in idealized particle size distribution was found between the water and wetted water treatments as compared to the other treatments for burnt tickets. Emergency crash recovery operations should include a treatment of the debris with water or wetted water. The resulting increase in particle size will make respiratory protection more effective in protecting the response crews.

Laboratory evaluation of airborne particulate control treatments for simulated aircraft crash recovery operations involving carbon fiber composite materials.

PubMed

Ferreri, Matthew; Slagley, Jeremy; Felker, Daniel

2015-01-01

This study compared four treatment protocols to reduce airborne composite fiber particulates during simulated aircraft crash recovery operations. Four different treatments were applied to determine effectiveness in reducing airborne composite fiber particulates as compared to a "no treatment" protocol. Both "gold standard" gravimetric methods and real-time instruments were used to describe mass per volume concentration, particle size distribution, and surface area. The treatment protocols were applying water, wetted water, wax, or aqueous film-forming foam (AFFF) to both burnt and intact tickets of aircraft composite skin panels. The tickets were then cut using a small high-speed rotary tool to simulate crash recovery operations. Aerosol test chamber. None. Airborne particulate control treatments. Measures included concentration units of milligrams per cubic meter of air, particle size distribution as described by both count median diameter and mass median diameter and geometric standard deviation of particles in micrometers, and surface area concentration in units of square micrometers per cubic centimeter. Finally, a Monte Carlo simulation was run on the particle size distribution results. Comparison was made via one-way analysis of variance. A significant difference (p<0.0001) in idealized particle size distribution was found between the water and wetted water treatments as compared to the other treatments for burnt tickets. Emergency crash recovery operations should include a treatment of the debris with water or wetted water. The resulting increase in particle size will make respiratory protection more effective in protecting the response crews.

13 CFR 121.410 - What are the size standards for SBA's Section 8(d) Subcontracting Program?

Code of Federal Regulations, 2010 CFR

2010-01-01

... Size Eligibility Requirements for Government Procurement § 121.410 What are the size standards for SBA... Small Business Act, a concern is small for subcontracts which relate to Government procurements if it...

The Precision of Effect Size Estimation From Published Psychological Research: Surveying Confidence Intervals.

PubMed

Brand, Andrew; Bradley, Michael T

2016-02-01

Confidence interval ( CI) widths were calculated for reported Cohen's d standardized effect sizes and examined in two automated surveys of published psychological literature. The first survey reviewed 1,902 articles from Psychological Science. The second survey reviewed a total of 5,169 articles from across the following four APA journals: Journal of Abnormal Psychology, Journal of Applied Psychology, Journal of Experimental Psychology: Human Perception and Performance, and Developmental Psychology. The median CI width for d was greater than 1 in both surveys. Hence, CI widths were, as Cohen (1994) speculated, embarrassingly large. Additional exploratory analyses revealed that CI widths varied across psychological research areas and that CI widths were not discernably decreasing over time. The theoretical implications of these findings are discussed along with ways of reducing the CI widths and thus improving precision of effect size estimation.

Linkage Disequilibrium in a Finite Population That Is Partially Selfing

PubMed Central

Golding, G. B.; Strobeck, C.

1980-01-01

The linkage disequilibrium expected in a finite, partially selfing population is analyzed, assuming the infinite allele model. Formulas for the expected sum of squares of the linkage disequilibria and the squared standard linkage disequilibrium are derived from the equilibrium values of sixteen inbreeding coefficients required to describe the behavior of the system. These formulas are identical to those obtained with random mating if the effective population size Ne = (1-½S)N and the effective recombination value re = (1-S)r/(1-½S), where S is the proportion of selfing, are substituted for the population size and the recombination value. Therefore, the effect of partial selfing at equilibrium is to reduce the population size by a factor 1-½S and the recombination value by a factor (1-S)/(1-½S). PMID:17249017

Conceptual basis for prescriptive growth standards from conception to early childhood: present and future.

PubMed

Uauy, R; Casanello, P; Krause, B; Kuzanovic, J P; Corvalan, C

2013-09-01

Healthy growth in utero and after birth is fundamental for lifelong health and wellbeing. The World Health Organization (WHO) recently published standards for healthy growth from birth to 6 years of age; analogous standards for healthy fetal growth are not currently available. Current fetal growth charts in use are not true standards, since they are based on cross-sectional measurements of attained size under conditions that do not accurately reflect normal growth. In most cases, the pregnant populations and environments studied are far from ideal; thus the data are unlikely to reflect optimal fetal growth. A true standard should reflect how fetuses and newborns 'should' grow under ideal environmental conditions. The development of prescriptive intrauterine and newborn growth standards derived from the INTERGROWTH-21(st) Project provides the data that will allow us for the first time to establish what is 'normal' fetal growth. The INTERGROWTH-21(st) study centres provide the data set obtained under pre-established standardised criteria, and details of the methods used are also published. Multicentre study with sites in all major geographical regions of the world using a standard evaluation protocol. These standards will assess risk of abnormal size at birth and serve to evaluate potentially effective interventions to promote optimal growth beyond securing survival. The new normative standards have the potential to impact perinatal and neonatal survival and beyond, particularly in developing countries where fetal growth restriction is most prevalent. They will help us identify intrauterine growth restriction at earlier stages of development, when preventive or corrective strategies might be more effective than at present. These growth standards will take us one step closer to effective action in preventing and potentially reversing abnormal intrauterine growth. Achieving 'optimal' fetal growth requires that we act not only during pregnancy but that we optimize the maternal uterine environment from the time before conception, through embryonic development until fetal growth is complete. The remaining challenge is how 'early' will we be able to act, now that we can better monitor fetal growth. © 2013 The Authors BJOG An International Journal of Obstetrics and Gynaecology © 2013 RCOG.

Tau-U: A Quantitative Approach for Analysis of Single-Case Experimental Data in Aphasia.

PubMed

Lee, Jaime B; Cherney, Leora R

2018-03-01

Tau-U is a quantitative approach for analyzing single-case experimental design (SCED) data. It combines nonoverlap between phases with intervention phase trend and can correct for a baseline trend (Parker, Vannest, & Davis, 2011). We demonstrate the utility of Tau-U by comparing it with the standardized mean difference approach (Busk & Serlin, 1992) that is widely reported within the aphasia SCED literature. Repeated writing measures from 3 participants with chronic aphasia who received computer-based writing treatment are analyzed visually and quantitatively using both Tau-U and the standardized mean difference approach. Visual analysis alone was insufficient for determining an effect between the intervention and writing improvement. The standardized mean difference yielded effect sizes ranging from 4.18 to 26.72 for trained items and 1.25 to 3.20 for untrained items. Tau-U yielded significant (p < .05) effect sizes for 2 of 3 participants for trained probes and 1 of 3 participants for untrained probes. A baseline trend correction was applied to data from 2 of 3 participants. Tau-U has the unique advantage of allowing for the correction of an undesirable baseline trend. Although further study is needed, Tau-U shows promise as a quantitative approach to augment visual analysis of SCED data in aphasia.

Inherent size effects on XANES of nanometer metal clusters: Size-selected platinum clusters on silica

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dai, Yang; Gorey, Timothy J.; Anderson, Scott L.

2016-12-12

X-ray absorption near-edge structure (XANES) is commonly used to probe the oxidation state of metal-containing nanomaterials, however, as the particle size in the material drops below a few nanometers, it becomes important to consider inherent size effects on the electronic structure of the materials. In this paper, we analyze a series of size-selected Pt n/SiO 2 samples, using X-ray photoelectron spectroscopy (XPS), low energy ion scattering, grazing-incidence small angle X-ray scattering, and XANES. The oxidation state and morphology are characterized both as-deposited in UHV, and after air/O 2 exposure and annealing in H 2. Here, the clusters are found tomore » be stable during deposition and upon air exposure, but sinter if heated above ~150 °C. XANES shows shifts in the Pt L 3 edge, relative to bulk Pt, that increase with decreasing cluster size, and the cluster samples show high white line intensity. Reference to bulk standards would suggest that the clusters are oxidized, however, XPS shows that they are not. Instead, the XANES effects are attributable to development of a band gap and localization of empty state wavefunctions in small clusters.« less

Enhanced antibacterial effects of clove essential oil by nanoemulsion.

PubMed

Anwer, Md Khalid; Jamil, Shahid; Ibnouf, Elmutasim Osman; Shakeel, Faiyaz

2014-01-01

The aim of present study was to develop and evaluate nanoemulsion formulations of clove essential oil (CEO) for its antibacterial effects in comparison with pure CEO and standard amikacin antibiotic (positive control). Different nanoemulsions of CEO were developed by aqueous phase titration method via construction of pseudo-ternary phase diagrams and investigated for thermodynamic stability and self-nanoemulsification tests. Selected formulations (F1-F5) were characterized for droplet size distribution, viscosity, zeta potential, transmittance and surface morphology. Based on lowest droplet size (29.1 nm), lowest PI (0.026), lowest viscosity (34.6 cp), optimal zeta potential (-31.4 mV), highest transmittance (99.4 %) and lowest concentration of Triacetin (8 % w/w), CEO nanoemulsion F1 (containing 1 % w/w of CEO, 8 % w/w of Triacetin, 15 % w/w of Tween-80, 15 % w/w of Labrasol and 61 % w/w of water) was subjected to antibacterial studies in comparison with pure oil and standard amikacin. The antibacterial effects of F1 were found to be superior over pure oil against all bacterial strains investigated. However, the antibacterial effects of F1 were highly comparable with standard amikacin against all bacterial strains. The minimum inhibitory concentrations (MICs) of F1 were observed in the range of 0.075-0.300 % w/w as compared to pure oil (MICs 0.130-0.500 % w/w) and standard amikacin (MICs 2-16 μg/ml). These results indicated the potential of nanoemulsions for enhancing the therapeutic efficacy of natural bioactive ingredients such as CEO.

Sample size calculation in economic evaluations.

PubMed

Al, M J; van Hout, B A; Michel, B C; Rutten, F F

1998-06-01

A simulation method is presented for sample size calculation in economic evaluations. As input the method requires: the expected difference and variance of costs and effects, their correlation, the significance level (alpha) and the power of the testing method and the maximum acceptable ratio of incremental effectiveness to incremental costs. The method is illustrated with data from two trials. The first compares primary coronary angioplasty with streptokinase in the treatment of acute myocardial infarction, in the second trial, lansoprazole is compared with omeprazole in the treatment of reflux oesophagitis. These case studies show how the various parameters influence the sample size. Given the large number of parameters that have to be specified in advance, the lack of knowledge about costs and their standard deviation, and the difficulty of specifying the maximum acceptable ratio of incremental effectiveness to incremental costs, the conclusion of the study is that from a technical point of view it is possible to perform a sample size calculation for an economic evaluation, but one should wonder how useful it is.

75 FR 43307 - Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Notice of Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

... direction under section 104(b) of the CPSIA.\\1\\ Section 104(c) specifies that the crib standards will cover...-Size Baby Cribs, but with several changes that strengthen the standard. 2. Section 104(c) of the CPSIA... 104 of the CPSIA. Section 104(c)(2) of the CPSIA states that the section applies to any person that...

Fracture toughness testing of polymer matrix composites

NASA Technical Reports Server (NTRS)

Grady, Joseph E.

1992-01-01

A review of the interlaminar fracture indicates that a standard specimen geometry is needed to obtain consistent fracture toughness measurements in polymer matrix composites. In general, the variability of measured toughness values increases as the toughness of the material increases. This variability could be caused by incorrect sizing of test specimens and/or inconsistent data reduction procedures. A standard data reduction procedure is therefore needed as well, particularly for the tougher materials. Little work has been reported on the effects of fiber orientation, fiber architecture, fiber surface treatment or interlaminar fracture toughness, and the mechanisms by which the fibers increase fracture toughness are not well understood. The little data that is available indicates that woven fiber reinforcement and fiber sizings can significantly increase interlaminar fracture toughness.

Benefits of Group Living Include Increased Feeding Efficiency and Lower Mass Loss during Desiccation in the Social and Inbreeding Spider Stegodyphus dumicola

PubMed Central

Vanthournout, Bram; Greve, Michelle; Bruun, Anne; Bechsgaard, Jesper; Overgaard, Johannes; Bilde, Trine

2016-01-01

Group living carries a price: it inherently entails increased competition for resources and reproduction, and may also be associated with mating among relatives, which carries costs of inbreeding. Nonetheless, group living and sociality is found in many animals, and understanding the direct and indirect benefits of cooperation that override the inherent costs remains a challenge in evolutionary ecology. Individuals in groups may benefit from more efficient management of energy or water reserves, for example in the form of reduced water or heat loss from groups of animals huddling, or through reduced energy demands afforded by shared participation in tasks. We investigated the putative benefits of group living in the permanently social spider Stegodyphus dumicola by comparing the effect of group size on standard metabolic rate, lipid/protein content as a body condition measure, feeding efficiency, per capita web investment, and weight/water loss and survival during desiccation. Because energetic expenditure is temperature sensitive, some assays were performed under varying temperature conditions. We found that feeding efficiency increased with group size, and the rate of weight loss was higher in solitary individuals than in animals in groups of various sizes during desiccation. Interestingly, this was not translated into differences in survival or in standard metabolic rate. We did not detect any group size effects for other parameters, and group size effects did not co-vary with experimental temperature in a predictive manner. Both feeding efficiency and mass loss during desiccation are relevant ecological factors as the former results in lowered predator exposure time, and the latter benefits social spiders which occupy arid, hot environments. PMID:26869936

Impact of and correction for instrument sensitivity drift on nanoparticle size measurements by single-particle ICP-MS

PubMed Central

El Hadri, Hind; Petersen, Elijah J.; Winchester, Michael R.

2016-01-01

The effect of ICP-MS instrument sensitivity drift on the accuracy of NP size measurements using single particle (sp)ICP-MS is investigated. Theoretical modeling and experimental measurements of the impact of instrument sensitivity drift are in agreement and indicate that drift can impact the measured size of spherical NPs by up to 25 %. Given this substantial bias in the measured size, a method was developed using an internal standard to correct for the impact of drift and was shown to accurately correct for a decrease in instrument sensitivity of up to 50 % for 30 nm and 60 nm gold nanoparticles. PMID:26894759

Computer simulations of ions in radio-frequency traps

NASA Technical Reports Server (NTRS)

Williams, A.; Prestage, J. D.; Maleki, L.; Djomehri, J.; Harabetian, E.

1990-01-01

The motion of ions in a trapped-ion frequency standard affects the stability of the standard. In order to study the motion and structures of large ion clouds in a radio-frequency (RF) trap, a computer simulation of the system that incorporates the effect of thermal excitation of the ions was developed. Results are presented from the simulation for cloud sizes up to 512 ions, emphasizing cloud structures in the low-temperature regime.

Predicted effect size of lisdexamfetamine treatment of attention deficit/hyperactivity disorder (ADHD) in European adults: Estimates based on indirect analysis using a systematic review and meta-regression analysis.

PubMed

Fridman, M; Hodgkins, P S; Kahle, J S; Erder, M H

2015-06-01

There are few approved therapies for adults with attention-deficit/hyperactivity disorder (ADHD) in Europe. Lisdexamfetamine (LDX) is an effective treatment for ADHD; however, no clinical trials examining the efficacy of LDX specifically in European adults have been conducted. Therefore, to estimate the efficacy of LDX in European adults we performed a meta-regression of existing clinical data. A systematic review identified US- and Europe-based randomized efficacy trials of LDX, atomoxetine (ATX), or osmotic-release oral system methylphenidate (OROS-MPH) in children/adolescents and adults. A meta-regression model was then fitted to the published/calculated effect sizes (Cohen's d) using medication, geographical location, and age group as predictors. The LDX effect size in European adults was extrapolated from the fitted model. Sensitivity analyses performed included using adult-only studies and adding studies with placebo designs other than a standard pill-placebo design. Twenty-two of 2832 identified articles met inclusion criteria. The model-estimated effect size of LDX for European adults was 1.070 (95% confidence interval: 0.738, 1.401), larger than the 0.8 threshold for large effect sizes. The overall model fit was adequate (80%) and stable in the sensitivity analyses. This model predicts that LDX may have a large treatment effect size in European adults with ADHD. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Effects of SiC on Properties of Cu-SiC Metal Matrix Composites

NASA Astrophysics Data System (ADS)

Efe, G. Celebi; Altinsoy, I.; Ipek, M.; Zeytin, S.; Bindal, C.

2011-12-01

This paper was focused on the effects of particle size and distribution on some properties of the SiC particle reinforced Cu composites. Copper powder produced by cementation method was reinforced with SiC particles having 1 and 30 μm particle size and sintered at 700 °C. SEM studies showed that SiC particles dispersed in copper matrix homogenously. The presence of Cu and SiC components in composites were verified by XRD analysis technique. The relative densities of Cu-SiC composites determined by Archimedes' principle are ranged from 96.2% to 90.9% for SiC with 1 μm particle size, 97.0 to 95.0 for SiC with 30 μm particle size. Measured hardness of sintered compacts varied from 130 to 155 HVN for SiC having 1 μm particle size, 188 to 229 HVN for SiC having 1 μm particle size. Maximum electrical conductivity of test materials was obtained as 80.0% IACS (International annealed copper standard) for SiC with 1 μm particle size and 83.0% IACS for SiC with 30 μm particle size.

Spatial optical crosstalk in CMOS image sensors integrated with plasmonic color filters.

PubMed

Yu, Yan; Chen, Qin; Wen, Long; Hu, Xin; Zhang, Hui-Fang

2015-08-24

Imaging resolution of complementary metal oxide semiconductor (CMOS) image sensor (CIS) keeps increasing to approximately 7k × 4k. As a result, the pixel size shrinks down to sub-2μm, which greatly increases the spatial optical crosstalk. Recently, plasmonic color filter was proposed as an alternative to conventional colorant pigmented ones. However, there is little work on its size effect and the spatial optical crosstalk in a model of CIS. By numerical simulation, we investigate the size effect of nanocross array plasmonic color filters and analyze the spatial optical crosstalk of each pixel in a Bayer array of a CIS with a pixel size of 1μm. It is found that the small pixel size deteriorates the filtering performance of nanocross color filters and induces substantial spatial color crosstalk. By integrating the plasmonic filters in the low Metal layer in standard CMOS process, the crosstalk reduces significantly, which is compatible to pigmented filters in a state-of-the-art backside illumination CIS.

Reviving common standards in point-count surveys for broad inference across studies

USGS Publications Warehouse

Matsuoka, Steven M.; Mahon, C. Lisa; Handel, Colleen M.; Solymos, Peter; Bayne, Erin M.; Fontaine, Patricia C.; Ralph, C.J.

2014-01-01

We revisit the common standards recommended by Ralph et al. (1993, 1995a) for conducting point-count surveys to assess the relative abundance of landbirds breeding in North America. The standards originated from discussions among ornithologists in 1991 and were developed so that point-count survey data could be broadly compared and jointly analyzed by national data centers with the goals of monitoring populations and managing habitat. Twenty years later, we revisit these standards because (1) they have not been universally followed and (2) new methods allow estimation of absolute abundance from point counts, but these methods generally require data beyond the original standards to account for imperfect detection. Lack of standardization and the complications it introduces for analysis become apparent from aggregated data. For example, only 3% of 196,000 point counts conducted during the period 1992-2011 across Alaska and Canada followed the standards recommended for the count period and count radius. Ten-minute, unlimited-count-radius surveys increased the number of birds detected by >300% over 3-minute, 50-m-radius surveys. This effect size, which could be eliminated by standardized sampling, was ≥10 times the published effect sizes of observers, time of day, and date of the surveys. We suggest that the recommendations by Ralph et al. (1995a) continue to form the common standards when conducting point counts. This protocol is inexpensive and easy to follow but still allows the surveys to be adjusted for detection probabilities. Investigators might optionally collect additional information so that they can analyze their data with more flexible forms of removal and time-of-detection models, distance sampling, multiple-observer methods, repeated counts, or combinations of these methods. Maintaining the common standards as a base protocol, even as these study-specific modifications are added, will maximize the value of point-count data, allowing compilation and analysis by regional and national data centers.

The effectiveness of tools used to evaluate successful critical decision making skills for applicants to healthcare graduate educational programs: a systematic review.

PubMed

Benham, Brian; Hawley, Diane

2015-05-15

Students leave healthcare academic programs for a variety of reasons. When they attrite, it is disappointing for the student as well as their faculty. Advanced practice nursing and other healthcare professions require not only extensive academic preparation, but also the ability to critically evaluate patient care situations. The ability to critically evaluate a situation is not innate. Critical decision making skills are high level skills that are difficult to assess. For the purpose of this review, critical decision making and critical thinking skills refer to the same constructs and will be referred to globally as critical decision making skills. The objective of this review was to identify the effectiveness of tools used to evaluate critical decision making skills for applicants to healthcare graduate educational programs. Adult (18 years of age or older) applicants, students enrolled and/or recent graduates (within one year from completion) of healthcare graduate educational programs. Types of interventions: This review considered studies that evaluated the utilization of unique tools as well as standard tools, such as the Graduate Record Exam or grade point average, to evaluate critical decision making skills in graduate healthcare program applicants. Types of studies: Experimental and non-experimental studies were considered for inclusion. Types of outcomes: Successful quantitative evaluations based on specific field of study standards. The search strategy aimed to find both published and unpublished studies. Studies published in English after 1969 were considered for inclusion in this review. Databases that included both published and unpublished (grey) literature were searched. Additionally, reference lists from all articles retrieved were examined for articles for inclusion. Selected papers were assessed by two independent reviewers using standardized critical appraisal instruments from Joanna Briggs Institute. Any disagreement between reviewers was resolved through discussion or with a third reviewer. Data was extracted independently by each reviewer from papers included in the review using a Microsoft Excel spreadsheet. Included data included study type, 'r' values, number of subjects and reported 'p' values. These were indexed by author, year and study title. The meta-analysis was performed using the method for effect size analysis from Hunter and Schmidt. The syntax for equations was transposed into a Microsoft Excel spreadsheet for data entry, analysis and graph creation. No articles or paper addressing unique tools for ascertaining critical decision making skills met the inclusion criteria. Standard tools, which were represented in the literature, assess critical decision making skills via prediction of academic and clinical success, which indicates the presence of critical decision making skills in graduate healthcare students. A total of 16 studies addressing standard tools were included in this review. All were retrospective case series studies. The date range for the included studies was 1970 to 2009. The strongest relationship was undergraduate grade point average's correlation to graduate grade point average (small effect size with an 'r' value of 0.27, credibility interval of 0.18-0.37). The second strongest relationship was between Graduate Record Examination’s verbal section and graduate grade point average (small effect size with an r value of 0.24, CrI of 0.11-0.37). An applicant’s undergraduate GPA has the strongest correlation with graduate healthcare program success of the indicators analyzed (r = 0.27, small effect size). The next best predictor of graduate healthcare program success was the GRE Verbal score (r = 0.24, small effect size). However, all of the variables carried positive correlations with graduate success, just of lesser effect size strength. This review supports the continued use of traditional indicators of graduate school potential in the undergraduate grade point average and the various sections of the Graduate Record Examination for the selection of graduate healthcare applicants. Primary studies should be funded and performed to assess the use of unique tools in assessing critical thinking in graduate healthcare students. The Joanna Briggs Institute.

Measuring lip force by oral screens. Part 1: Importance of screen size and individual variability.

PubMed

Wertsén, Madeleine; Stenberg, Manne

2017-06-01

To reduce drooling and facilitate food transport in rehabilitation of patients with oral motor dysfunction, lip force can be trained using an oral screen. Longitudinal studies evaluating the effect of training require objective methods. The aim of this study was to evaluate a method for measuring lip strength, to investigate normal values and fluctuation of lip force in healthy adults on 1 occasion and over time, to study how the size of the screen affects the force, to evaluate the most appropriate measure of reliability, and to identify force performed in relation to gender. Three different sizes of oral screens were used to measure the lip force for 24 healthy adults on 3 different occasions, during a period of 6 months, using an apparatus based on strain gauge. The maximum lip force as evaluated with this method depends on the area of the screen size. By calculating the projected area of the screen, the lip force could be normalized to an oral screen pressure quantity expressed in kPa, which can be used for comparing measurements from screens with different sizes. Both the mean value and standard deviation were shown to vary between individuals. The study showed no differences regarding gender and only small variation with age. Normal variation over time (months) may be up to 3 times greater than the standard error of measurement at a certain occasion. The lip force increases in relation to the projected area of the screen. No general standard deviation can be assigned to the method and all measurements should be analyzed individually based on oral screen pressure to compensate for different screen sizes.

13 CFR 121.510 - What is the size standard for leasing of Government land for uranium mining?

Code of Federal Regulations, 2013 CFR

2013-01-01

... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false What is the size standard for leasing of Government land for uranium mining? 121.510 Section 121.510 Business Credit and Assistance... Size Eligibility Requirements for Sales Or Lease of Government Property § 121.510 What is the size...

Test of a Power Transfer Model for Standardized Electrofishing

USGS Publications Warehouse

Miranda, L.E.; Dolan, C.R.

2003-01-01

Standardization of electrofishing in waters with differing conductivities is critical when monitoring temporal and spatial differences in fish assemblages. We tested a model that can help improve the consistency of electrofishing by allowing control over the amount of power that is transferred to the fish. The primary objective was to verify, under controlled laboratory conditions, whether the model adequately described fish immobilization responses elicited with various electrical settings over a range of water conductivities. We found that the model accurately described empirical observations over conductivities ranging from 12 to 1,030 ??S/cm for DC and various pulsed-DC settings. Because the model requires knowledge of a fish's effective conductivity, an attribute that is likely to vary according to species, size, temperature, and other variables, a second objective was to gather available estimates of the effective conductivity of fish to examine the magnitude of variation and to assess whether in practical applications a standard effective conductivity value for fish may be assumed. We found that applying a standard fish effective conductivity of 115 ??S/cm introduced relatively little error into the estimation of the peak power density required to immobilize fish with electrofishing. However, this standard was derived from few estimates of fish effective conductivity and a limited number of species; more estimates are needed to validate our working standard.

Will smaller plates lead to smaller waists? A systematic review and meta-analysis of the effect that experimental manipulation of dishware size has on energy consumption.

PubMed

Robinson, E; Nolan, S; Tudur-Smith, C; Boyland, E J; Harrold, J A; Hardman, C A; Halford, J C G

2014-10-01

It has been suggested that providing consumers with smaller dishware may prove an effective way of helping people eat less and preventing weight gain, but experimental evidence supporting this has been mixed. The objective of the present work was to examine the current evidence base for whether experimentally manipulated differences in dishware size influence food consumption. We systematically reviewed studies that experimentally manipulated the dishware size participants served themselves at a meal with and measured subsequent food intake. We used inverse variance meta-analysis, calculating the standardized mean difference (SMD) in food intake between smaller and larger dishware size conditions. Nine experiments from eight publications were eligible for inclusion. The majority of experiments found no significance difference in food intake when participants ate from smaller vs. larger dishware. With all available data included, analysis indicated a marginal effect of dishware size on food intake, with larger dishware size associated with greater intake. However, this effect was small and there was a large amount of heterogeneity across studies (SMD: -0.18, 95% confidence interval: -0.35, 0.00, I(2) = 77%). Evidence to date does not show that dishware size has a consistent effect on food intake, so recommendations surrounding the use of smaller plates/dishware to improve public health may be premature. © 2014 The Authors. obesity reviews © 2014 World Obesity.

A Meta-Analysis of Morphological Interventions: Effects on Literacy Achievement of Children with Literacy Difficulties

ERIC Educational Resources Information Center

Goodwin, Amanda P.; Ahn, Soyeon

2010-01-01

This study synthesizes 79 standardized mean-change differences between control and treatment groups from 17 independent studies, investigating the effect of morphological interventions on literacy outcomes for students with literacy difficulties. Average total sample size ranged from 15 to 261 from a wide range of grade levels. Overall,…

Some radiation effects on organic binders in X-ray fluorescence spectrometry

NASA Astrophysics Data System (ADS)

Novosel-Radović, Vj.; MaljkoviĆ, Da.; NenadiĆ, N.

The paper deals with diminished wear resistance of standard samples in X-ray fluorescence spectrometry. The effect of X-ray irradiation on pellet samples, pressed with starch as organic binder, was investigated by sieve analysis and scanning electron microscopy. A change in the starch grain size was found as a result of swelling and cracking.

The effect of journal impact factor, reporting conflicts, and reporting funding sources, on standardized effect sizes in back pain trials: a systematic review and meta-regression.

PubMed

Froud, Robert; Bjørkli, Tom; Bright, Philip; Rajendran, Dévan; Buchbinder, Rachelle; Underwood, Martin; Evans, David; Eldridge, Sandra

2015-11-30

Low back pain is a common and costly health complaint for which there are several moderately effective treatments. In some fields there is evidence that funder and financial conflicts are associated with trial outcomes. It is not clear whether effect sizes in back pain trials relate to journal impact factor, reporting conflicts of interest, or reporting funding. We performed a systematic review of English-language papers reporting randomised controlled trials of treatments for non-specific low back pain, published between 2006-2012. We modelled the relationship using 5-year journal impact factor, and categories of reported of conflicts of interest, and categories of reported funding (reported none and reported some, compared to not reporting these) using meta-regression, adjusting for sample size, and publication year. We also considered whether impact factor could be predicted by the direction of outcome, or trial sample size. We could abstract data to calculate effect size in 99 of 146 trials that met our inclusion criteria. Effect size is not associated with impact factor, reporting of funding source, or reporting of conflicts of interest. However, explicitly reporting 'no trial funding' is strongly associated with larger absolute values of effect size (adjusted β=1.02 (95 % CI 0.44 to 1.59), P=0.001). Impact factor increases by 0.008 (0.004 to 0.012) per unit increase in trial sample size (P<0.001), but does not differ by reported direction of the LBP trial outcome (P=0.270). The absence of associations between effect size and impact factor, reporting sources of funding, and conflicts of interest reflects positively on research and publisher conduct in the field. Strong evidence of a large association between absolute magnitude of effect size and explicit reporting of 'no funding' suggests authors of unfunded trials are likely to report larger effect sizes, notwithstanding direction. This could relate in part to quality, resources, and/or how pragmatic a trial is.

78 FR 37397 - Small Business Size Standards: Agriculture, Forestry, Fishing and Hunting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

... Small Business Size Standards: Agriculture, Forestry, Fishing and Hunting AGENCY: U.S. Small Business... (NAICS) Sector 11, Agriculture, Forestry, Fishing and Hunting, and retaining the current standards for...-industries (``exceptions'') in NAICS Sector 11, Agriculture, Forestry, Fishing and Hunting, to determine...

Effect of an essential oil mixture on skin reactions in women undergoing radiotherapy for breast cancer: a pilot study.

PubMed

Halm, Margo A; Baker, Clarice; Harshe, Val

2014-12-01

This pilot study compared the effects of an essential oil mixture versus standard care on skin reactions in breast cancer patients receiving radiation. Using an experimental design, 24 patients were randomized to standard care (i.e., RadiaPlexRx™ ointment) or an essential oil mixture. Products were applied topically three times a day until 1 month postradiation. Weekly skin assessments were recorded and women completed patient satisfaction and quality of life (QOL) instruments at 3-, 6-, and 10-week intervals. No significant differences were found for skin, QOL, or patient satisfaction at interim or follow-up time points. Effect sizes were as follows: skin = .01 to .07 (small-medium effect); QOL = .01 to .04 (small effect); patient satisfaction = .02 (small effect). The essential oil mixture did not provide a better skin protectant effect than standard care. These findings suggest the essential oil mixture is equivalent to RadiaPlexRx, a common product used as standard care since it has been shown to be effective in protecting skin from radiation. Thus, this pilot provides evidence to support botanical or nonpharmaceutical options for women during radiotherapy for breast cancer. © The Author(s) 2014.

77 FR 10943 - Small Business Size Standards: Transportation and Warehousing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... assistance programs, SBA establishes small business size definitions (referred to as size standards) for... business concern * * *'' Sec. 3(a)(2)(C)(ii)(II) [emphasis added]. Third, SBA's existing definitions of... establishes distinct definitions to determine which businesses are deemed small businesses. The Small Business...

13 CFR 121.402 - What size standards are applicable to Federal Government Contracting programs?

Code of Federal Regulations, 2010 CFR

2010-01-01

... Size Eligibility Requirements for Government Procurement § 121.402 What size standards are applicable... being purchased. Other factors considered include previous Government procurement classifications of the... to Federal Government Contracting programs? 121.402 Section 121.402 Business Credit and Assistance...

Improving the accuracy of hyaluronic acid molecular weight estimation by conventional size exclusion chromatography.

PubMed

Shanmuga Doss, Sreeja; Bhatt, Nirav Pravinbhai; Jayaraman, Guhan

2017-08-15

There is an unreasonably high variation in the literature reports on molecular weight of hyaluronic acid (HA) estimated using conventional size exclusion chromatography (SEC). This variation is most likely due to errors in estimation. Working with commercially available HA molecular weight standards, this work examines the extent of error in molecular weight estimation due to two factors: use of non-HA based calibration and concentration of sample injected into the SEC column. We develop a multivariate regression correlation to correct for concentration effect. Our analysis showed that, SEC calibration based on non-HA standards like polyethylene oxide and pullulan led to approximately 2 and 10 times overestimation, respectively, when compared to HA-based calibration. Further, we found that injected sample concentration has an effect on molecular weight estimation. Even at 1g/l injected sample concentration, HA molecular weight standards of 0.7 and 1.64MDa showed appreciable underestimation of 11-24%. The multivariate correlation developed was found to reduce error in estimations at 1g/l to <4%. The correlation was also successfully applied to accurately estimate the molecular weight of HA produced by a recombinant Lactococcus lactis fermentation. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparable effects of exercise and analgesics for pain secondary to knee osteoarthritis: a meta-analysis of trials included in Cochrane systematic reviews.

PubMed

Henriksen, Marius; Hansen, Julie B; Klokker, Louise; Bliddal, Henning; Christensen, Robin

2016-07-01

Evidence of comparative effectiveness of different treatment approaches is important for clinical decision-making, yet absent for most recommended treatments of knee osteoarthritis pain. The objective of this study was to estimate the comparative effectiveness of exercise versus orally administered analgesics for pain in patients with knee osteoarthritis. The Cochrane Database of systematic reviews was searched for meta-analyses of randomized controlled studies comparing exercise or analgesics with a control group (placebo or usual care) and with pain as an outcome. Individual study estimates were identified and effect sizes were calculated from group differences. We combined study-level effects on pain with a random effects meta-analysis and compared effect sizes between exercise trials and trials with analgesic interventions. We included six Cochrane reviews (four pharmacology, two exercise). From these, 54 trials were eligible (20 pharmacology, 34 exercise), with 9806 participants (5627 pharmacology, 4179 exercise). The pooled effect size of pharmacological pain interventions was 0.41 (95% CI: 0.23-0.59) and for exercise 0.46 standardized mean difference (95% CI: 0.34-0.59). There was no statistically significant difference between the two types of intervention (difference: 0.06 standardized mean difference [95% CI: -0.28-0.16; p = 0.61]). This meta-epidemiological study provides indirect evidence that for knee osteoarthritis pain, the effects from exercise and from oral analgesics are comparable. These results may support shared decision-making where a patient for some reason is unable to exercise or who consider exercise as unviable and analgesics as a more feasible choice. PROSPERO registration: CRD42013006924.

The effects of neutralized particles on the sampling efficiency of polyurethane foam used to estimate the extrathoracic deposition fraction.

PubMed

Tomyn, Ronald L; Sleeth, Darrah K; Thiese, Matthew S; Larson, Rodney R

2016-01-01

In addition to chemical composition, the site of deposition of inhaled particles is important for determining the potential health effects from an exposure. As a result, the International Organization for Standardization adopted a particle deposition sampling convention. This includes extrathoracic particle deposition sampling conventions for the anterior nasal passages (ET1) and the posterior nasal and oral passages (ET2). This study assessed how well a polyurethane foam insert placed in an Institute of Occupational Medicine (IOM) sampler can match an extrathoracic deposition sampling convention, while accounting for possible static buildup in the test particles. In this way, the study aimed to assess whether neutralized particles affected the performance of this sampler for estimating extrathoracic particle deposition. A total of three different particle sizes (4.9, 9.5, and 12.8 µm) were used. For each trial, one particle size was introduced into a low-speed wind tunnel with a wind speed set a 0.2 m/s (∼40 ft/min). This wind speed was chosen to closely match the conditions of most indoor working environments. Each particle size was tested twice either neutralized, using a high voltage neutralizer, or left in its normal (non neutralized) state as standard particles. IOM samplers were fitted with a polyurethane foam insert and placed on a rotating mannequin inside the wind tunnel. Foam sampling efficiencies were calculated for all trials to compare against the normalized ET1 sampling deposition convention. The foam sampling efficiencies matched well to the ET1 deposition convention for the larger particle sizes, but had a general trend of underestimating for all three particle sizes. The results of a Wilcoxon Rank Sum Test also showed that only at 4.9 µm was there a statistically significant difference (p-value = 0.03) between the foam sampling efficiency using the standard particles and the neutralized particles. This is interpreted to mean that static buildup may be occurring and neutralizing the particles that are 4.9 µm diameter in size did affect the performance of the foam sampler when estimating extrathoracic particle deposition.

Comparing two books and establishing probably efficacious treatment for low sexual desire.

PubMed

Balzer, Alexandra M; Mintz, Laurie B

2015-04-01

Using a sample of 45 women, this study compared the effectiveness of a previously studied (Mintz, Balzer, Zhao, & Bush, 2012) bibliotherapy intervention (Mintz, 2009), a similar self-help book (Hall, 2004), and a wait-list control (WLC) group. To examine intervention effectiveness, between and within group standardized effect sizes (interpreted with Cohen's, 1988 benchmarks .20 = small, .50 = medium, .80+ = large) and their confidence limits are used. In comparison to the WLC group, both interventions yielded large between-group posttest effect sizes on a measure of sexual desire. Additionally, large between-group posttest effect sizes were found for sexual satisfaction and lubrication among those reading the Mintz book. When examining within-group pretest to posttest effect sizes, medium to large effects were found for desire, lubrication, and orgasm for both books and for satisfaction and arousal for those reading the Mintz book. When directly comparing the books, all between-group posttest effect sizes were likely obtained by chance. It is concluded that both books are equally effective in terms of the outcome of desire, but whether or not there is differential efficacy in terms of other domains of sexual functioning is equivocal. Tentative evidence is provided for the longer term effectiveness of both books in enhancing desire. Arguing for applying criteria for empirically supported treatments to self-help, results are purported to establish the Mintz book as probably efficacious and to comprise a first step in this designation for the Hall book. (c) 2015 APA, all rights reserved).

Grain size segregation in debris discs

NASA Astrophysics Data System (ADS)

Thebault, P.; Kral, Q.; Augereau, J.-C.

2014-01-01

Context. In most debris discs, dust grain dynamics is strongly affected by stellar radiation pressure. Because this mechanism is size-dependent, we expect dust grains to be spatially segregated according to their sizes. However, because of the complex interplay between radiation pressure, grain processing by collisions, and dynamical perturbations, this spatial segregation of the particle size distribution (PSD) has proven difficult to investigate and quantify with numerical models. Aims: We propose to thoroughly investigate this problem by using a new-generation code that can handle some of the complex coupling between dynamical and collisional effects. We intend to explore how PSDs behave in both unperturbed discs at rest and in discs pertubed by planetary objects. Methods: We used the DyCoSS code to investigate the coupled effect of collisions, radiation pressure, and dynamical perturbations in systems that have reached a steady-state. We considered two setups: a narrow ring perturbed by an exterior planet, and an extended disc into which a planet is embedded. For both setups we considered an additional unperturbed case without a planet. We also investigated the effect of possible spatial size segregation on disc images at different wavelengths. Results: We find that PSDs are always spatially segregated. The only case for which the PSD follows a standard dn ∝ s-3.5ds law is for an unperturbed narrow ring, but only within the parent-body ring itself. For all other configurations, the size distributions can strongly depart from such power laws and have steep spatial gradients. As an example, the geometrical cross-section of the disc is very rarely dominated by the smallest grains on bound orbits, as it is expected to be in standard PSDs in sq with q ≤ -3. Although the exact profiles and spatial variations of PSDs are a complex function of the set-up that is considered, we are still able to derive some reliable results that will be useful for image or SED-fitting models of observed discs.

75 FR 81765 - Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Final Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-28

...Section 104(b) of the Consumer Product Safety Improvement Act of 2008 (``CPSIA'') requires the United States Consumer Product Safety Commission (``CPSC,'' ``Commission,'' or ``we'') to promulgate consumer product safety standards for durable infant or toddler products. These standards are to be ``substantially the same as'' applicable voluntary standards or more stringent than the voluntary standard if the Commission concludes that more stringent requirements would further reduce the risk of injury associated with the product. The Commission is issuing safety standards for full-size and non-full-size baby cribs in response to the direction under section 104(b) of the CPSIA.\\1\\ Section 104(c) of the CPSIA specifies that the crib standards will cover used as well as new cribs. The crib standards will apply to anyone who manufactures, distributes, or contracts to sell a crib; to child care facilities, family child care homes, and others holding themselves out to be knowledgeable about cribs; to anyone who leases, sublets, or otherwise places a crib in the stream of commerce; and to owners and operators of places of public accommodation affecting commerce. ---------------------------------------------------------------------------

Effect of calendar age on physical performance: A comparison of standard clinical measures with instrumented measures in middle-aged to older adults.

PubMed

Stijntjes, M; Meskers, C G M; de Craen, A J M; van Lummel, R C; Rispens, S M; Slagboom, P E; Maier, A B

2016-03-01

Decline in physical performance is highly prevalent during aging. Identification of sensitive markers of age-related changes in physical performance is important for early detection, development of therapeutic strategies and insight into underlying mechanisms. We studied the association of calendar age and familial longevity with standard clinical and instrumented measures of physical performance in a cohort of healthy middle-aged to older adults. Cross-sectional analysis within the Leiden Longevity Study consisting of offspring of nonagenarian siblings and their partners (n=300, mean age (SD) 65.3 (6.7) years). Standard clinical measures were 25-meter walking speed and total duration of the chair stand test (CST). Instrumented measures were determined using a body fixed sensor. Dependence of physical performance on calendar age and familial longevity (offspring versus partner status) was analyzed using linear and logistic regression, respectively, adjusted for gender and height. Higher calendar age was associated with slower walking speed and longer duration of the CST (standardized β (95% CI) -.024 (-.042; -.006) and .035 (.014;.056), respectively). Instrumented measures showed similar effect sizes with strongest associations for gait stability and symmetry in mediolateral direction and for the extension and flexion phase of sit-to-stand and stand-to-sit transfers, respectively. No differences were observed between offspring of nonagenarian siblings and their partners. Standard clinical and instrumented measures of physical performance are associated with similar effect size to age-related changes in physical performance observable from middle age. The potential added value of instrumented measures for understanding underlying mechanisms requires further attention. Copyright © 2015 Elsevier B.V. All rights reserved.

Prototype CoolCup cryolipolysis applicator with over 40% reduced treatment time demonstrates equivalent safety and efficacy with greater patient preference.

PubMed

Kilmer, Suzanne L

2017-01-01

Cryolipolysis is a safe, effective non-surgical procedure to reduce fat. For most cryolipolysis treatments, tissue is pulled between parallel cooling plates with a treatment duration of 60 minutes. A novel contoured cup, medium-sized applicator was developed to increase tissue contact with reduced skin tension and reduced treatment time. This prototype contoured cup was investigated with a standard cryolipolysis applicator to evaluate safety, efficacy, and patient preference. A prototype CoolCup medium-sized vacuum applicator (CoolSculpting System, ZELTIQ Aesthetics) was used to treat n = 19 subjects in the flanks. Randomly assigned, one flank received standard treatment with the CoolCore applicator (-10°C for 60 minutes). The contralateral flank received treatment from the CoolCup (-11°C for 35 minutes). The clinical study primary efficacy endpoint was 70% correct identification of baseline photographs by independent physician review. Incidence of adverse device effects was monitored. Fat layer reduction was measured by ultrasound and subject surveys were administered 12 weeks post-treatment. Equivalent efficacy was demonstrated between the CoolCore standard treatment and the prototype CoolCup. Independent review from three blinded physicians found 81% correct identification of baseline photographs for the standard treatment and 79% for the CoolCup. Ultrasound measurements indicated mean fat layer reduction of 4.38 mm for the standard treatment and 4.40 mm for the CoolCup; no statistically significant difference was found when comparing treatment efficacy of the two applicators (P = 0.96). Patient questionnaires revealed 85% preferred CoolCup because of shorter treatment duration and greater comfort. Procedural assessments revealed 45% lower pain scores for CoolCup. Immediate post-treatment clinical assessments revealed 82% less bruising. Typical side effects, such as numbness and erythema, were similar. There were no adverse events. This clinical study of a prototype medium-sized vacuum applicator with a cooled contoured surface indicates that the CoolCup produces equivalent safety and efficacy to the standard CoolCore cryolipolysis applicator. With a 42% reduction in treatment time, the procedure was found to be more comfortable because of lower vacuum skin tension and shorter treatment duration. Lasers Surg. Med. 49:63-68, 2017. © 2016 The Authors. Lasers in Surgery and Medicine Published by Wiley Periodicals, Inc. © 2016 The Authors. Lasers in Surgery and Medicine Published by Wiley Periodicals, Inc.

Effect of field-of-view size on gray values derived from cone-beam computed tomography compared with the Hounsfield unit values from multidetector computed tomography scans

PubMed Central

Shokri, Abbas; Bidgoli, Mohsen; Akbarzadeh, Mahdi; Ghazikhanlu-Sani, Karim; Fallahi-Sichani, Hamed

2018-01-01

Purpose This study aimed to evaluate the effect of field-of-view (FOV) size on the gray values derived from conebeam computed tomography (CBCT) compared with the Hounsfield unit values from multidetector computed tomography (MDCT) scans as the gold standard. Materials and Methods A radiographic phantom was designed with 4 acrylic cylinders. One cylinder was filled with distilled water, and the other 3 were filled with 3 types of bone substitute: namely, Nanobone, Cenobone, and Cerabone. The phantom was scanned with 2 CBCT systems using 2 different FOV sizes, and 1 MDCT system was used as the gold standard. The mean gray values (MGVs) of each cylinder were calculated in each imaging protocol. Results In both CBCT systems, significant differences were noted in the MGVs of all materials between the 2 FOV sizes (P<.05) except for Cerabone in the Cranex3D system. Significant differences were found in the MGVs of each material compared with the others in both FOV sizes for each CBCT system. No significant difference was seen between the Cranex3D CBCT system and the MDCT system in the MGVs of bone substitutes on images obtained with a small FOV. Conclusion The size of the FOV significantly changed the MGVs of all bone substitutes, except for Cerabone in the Cranex3D system. Both CBCT systems had the ability to distinguish the 3 types of bone substitutes based on a comparison of their MGVs. The Cranex3D CBCT system used with a small FOV had a significant correlation with MDCT results. PMID:29581947

77 FR 56741 - Federal Acquisition Regulation; NAICS and Size Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

....102(a)(1)). * * * * * 0 4. Amend section 19.303 by adding a new sentence at the end of paragraph (a... Regulation (FAR) to clarify that new North American Industry Classification System (NAICS) codes are not... corresponding industry size standards. Other corresponding changes were also made. Published industry size...

Parallel effects of the inversion In(3R)Payne on body size across the North American and Australian clines in Drosophila melanogaster.

PubMed

Kapun, M; Schmidt, C; Durmaz, E; Schmidt, P S; Flatt, T

2016-05-01

Chromosomal inversions are thought to play a major role in climatic adaptation. In D. melanogaster, the cosmopolitan inversion In(3R)Payne exhibits latitudinal clines on multiple continents. As many fitness traits show similar clines, it is tempting to hypothesize that In(3R)P underlies observed clinal patterns for some of these traits. In support of this idea, previous work in Australian populations has demonstrated that In(3R)P affects body size but not development time or cold resistance. However, similar data from other clines of this inversion are largely lacking; finding parallel effects of In(3R)P across multiple clines would considerably strengthen the case for clinal selection. Here, we have analysed the phenotypic effects of In(3R)P in populations originating from the endpoints of the latitudinal cline along the North American east coast. We measured development time, egg-to-adult survival, several size-related traits (femur and tibia length, wing area and shape), chill coma recovery, oxidative stress resistance and triglyceride content in homokaryon lines carrying In(3R)P or the standard arrangement. Our central finding is that the effects of In(3R)P along the North American cline match those observed in Australia: standard arrangement lines were larger than inverted lines, but the inversion did not influence development time or cold resistance. Similarly, In(3R)P did not affect egg-to-adult survival, oxidative stress resistance and lipid content. In(3R)P thus seems to specifically affect size traits in populations from both continents. This parallelism strongly suggests an adaptive pattern, whereby the inversion has captured alleles associated with growth regulation and clinal selection acts on size across both continents. © 2016 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2016 European Society For Evolutionary Biology.

Sparse feature learning for instrument identification: Effects of sampling and pooling methods.

PubMed

Han, Yoonchang; Lee, Subin; Nam, Juhan; Lee, Kyogu

2016-05-01

Feature learning for music applications has recently received considerable attention from many researchers. This paper reports on the sparse feature learning algorithm for musical instrument identification, and in particular, focuses on the effects of the frame sampling techniques for dictionary learning and the pooling methods for feature aggregation. To this end, two frame sampling techniques are examined that are fixed and proportional random sampling. Furthermore, the effect of using onset frame was analyzed for both of proposed sampling methods. Regarding summarization of the feature activation, a standard deviation pooling method is used and compared with the commonly used max- and average-pooling techniques. Using more than 47 000 recordings of 24 instruments from various performers, playing styles, and dynamics, a number of tuning parameters are experimented including the analysis frame size, the dictionary size, and the type of frequency scaling as well as the different sampling and pooling methods. The results show that the combination of proportional sampling and standard deviation pooling achieve the best overall performance of 95.62% while the optimal parameter set varies among the instrument classes.

A Meta-Analysis of Interventions for Struggling Readers in Grades 4–12: 1980–2011

PubMed Central

Scammacca, Nancy K.; Roberts, Greg; Vaughn, Sharon; Stuebing, Karla K.

2013-01-01

This meta-analysis synthesizes the literature on interventions for struggling readers in Grades 4 through 12 published between 1980 and 2011. It updates Scammacca et al.’s analysis of studies published between 1980 and 2004. The combined corpus of 82 study-wise effect sizes was meta-analyzed to determine (a) the overall effectiveness of reading interventions studied over the past 30 years, (b) how the magnitude of the effect varies based on student, intervention, and research design characteristics, and (c) what differences in effectiveness exist between more recent interventions and older ones. The analysis yielded a mean effect of 0.49, considerably smaller than the 0.95 mean effect reported in 2007. The mean effect for standardized measures was 0.21, also much smaller than the 0.42 mean effect reported in 2007. The mean effects for reading comprehension measures were similarly diminished. Results indicated that the mean effects for the 1980–2004 and 2005–2011 groups of studies were different to a statistically significant degree. The decline in effect sizes over time is attributed at least in part to increased use of standardized measures, more rigorous and complex research designs, differences in participant characteristics, and improvements in the school’s “business-as-usual” instruction that often serves as the comparison condition in intervention studies. PMID:24092916

A Meta-Analysis of Interventions for Struggling Readers in Grades 4-12: 1980-2011.

PubMed

Scammacca, Nancy K; Roberts, Greg; Vaughn, Sharon; Stuebing, Karla K

2015-01-01

This meta-analysis synthesizes the literature on interventions for struggling readers in Grades 4 through 12 published between 1980 and 2011. It updates Scammacca et al.'s analysis of studies published between 1980 and 2004. The combined corpus of 82 study-wise effect sizes was meta-analyzed to determine (a) the overall effectiveness of reading interventions studied over the past 30 years, (b) how the magnitude of the effect varies based on student, intervention, and research design characteristics, and (c) what differences in effectiveness exist between more recent interventions and older ones. The analysis yielded a mean effect of 0.49, considerably smaller than the 0.95 mean effect reported in 2007. The mean effect for standardized measures was 0.21, also much smaller than the 0.42 mean effect reported in 2007. The mean effects for reading comprehension measures were similarly diminished. Results indicated that the mean effects for the 1980-2004 and 2005-2011 groups of studies were different to a statistically significant degree. The decline in effect sizes over time is attributed at least in part to increased use of standardized measures, more rigorous and complex research designs, differences in participant characteristics, and improvements in the school's "business-as-usual" instruction that often serves as the comparison condition in intervention studies. © Hammill Institute on Disabilities 2013.

Stretched size of atrial septal defect predicted by intracardiac echocardiography.

PubMed

Lin, Ming-Chih; Fu, Yun-Ching; Jan, Sheng-Ling; Ho, Chi-Lin; Hwang, Betau

2010-01-01

The stretched size of an atrial septal defect (ASD) is important for device selection during transcatheter closure. However, balloon sizing carries potential risks such as hypotension, bradycardia, or laceration of the atrial septum. The aim of the present study was to investigate the accuracy of the predicted stretched size of ASD by intracardiac echocardiography (ICE). From December 2004 to November 2007, 136 consecutive patients with single secundum type ASD undergoing transcatheter closure of their defect using the Amplatzer septal occluder under ICE guidance were enrolled for analysis. There were 43 males and 93 females. The age ranged from 2.2 to 79.1 years with a median age of 13.4 years. The body weight ranged from 12.1 to 93.2 kg with a median body weight of 45.8 kg. The stretched size of ASD measured by a sizing plate was considered as the standard. ASD sizes measured by ICE in bicaval and short-axis views predicted the stretched size by formulae derived from linear regressions. The predicted stretched sizes obtained using 2 formulae, 1.34 x radicalbicaval xshort axis (formula 1) and 1.22 x larger diameter (formula 2), exhibited good agreement with the standard stretched size with Kappa values of 0.91 and 0.90, respectively. The accuracy rate of predicted stretched sizes within 2 mm, 3 mm, and 4 mm range of the standard size were 32.8%, 45.4%, and 57.7% (formula 1) and 33.1%, 50%, and 63.2% (formula 2). The stretched size of ASD predicted by ICE exhibited good agreement with the standard stretched size. This prediction provides helpful information, especially if balloon sizing cannot be adequately performed.

Stresses in Implant-Supported Fixed Complete Dentures with Different Screw-Tightening Sequences and Torque Application Modes.

PubMed

Barcellos, Leonardo H; Palmeiro, Marina Lobato; Naconecy, Marcos M; Geremia, Tomás; Cervieri, André; Shinkai, Rosemary S

2018-05-17

To compare the effects of different screw-tightening sequences and torque applications on stresses in implant-supported fixed complete dentures supported by five abutments. Strain gauges fixed to the abutments were used to test the sequences 2-4-3-1-5; 1-2-3-4-5; 3-2-4-1-5; and 2-5-4-1-3 with direct 10-Ncm torque or progressive torque (5 + 10 Ncm). Data were analyzed using analysis of variance and standardized effect size. No effects of tightening sequence or torque application were found except for the sequence 3-2-4-1-5 and some small to moderate effect sizes. Screw-tightening sequences and torque application modes have only a marginal effect on residual stresses.

Neuromuscular adaptations induced by adjacent joint training.

PubMed

Ema, R; Saito, I; Akagi, R

2018-03-01

Effects of resistance training are well known to be specific to tasks that are involved during training. However, it remains unclear whether neuromuscular adaptations are induced after adjacent joint training. This study examined the effects of hip flexion training on maximal and explosive knee extension strength and neuromuscular performance of the rectus femoris (RF, hip flexor, and knee extensor) compared with the effects of knee extension training. Thirty-seven untrained young men were randomly assigned to hip flexion training, knee extension training, or a control group. Participants in the training groups completed 4 weeks of isometric hip flexion or knee extension training. Standardized differences in the mean change between the training groups and control group were interpreted as an effect size, and the substantial effect was assumed to be ≥0.20 of the between-participant standard deviation at baseline. Both types of training resulted in substantial increases in maximal (hip flexion training group: 6.2% ± 10.1%, effect size = 0.25; knee extension training group: 20.8% ± 9.9%, effect size = 1.11) and explosive isometric knee extension torques and muscle thickness of the RF in the proximal and distal regions. Improvements in strength were accompanied by substantial enhancements in voluntary activation, which was determined using the twitch interpolation technique and RF activation. Differences in training effects on explosive torques and neural variables between the two training groups were trivial. Our findings indicate that hip flexion training results in substantial neuromuscular adaptations during knee extensions similar to those induced by knee extension training. © 2017 The Authors. Scandinavian Journal of Medicine & Science In Sports Published by John Wiley & Sons Ltd.

76 FR 63509 - Small Business Size Standards: Administrative and Support, Waste Management and Remediation Services

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... Small Business Size Standards: Administrative and Support, Waste Management and Remediation Services... Standards: Administrative and Support, Waste Management and Remediation Services AGENCY: U.S. Small Business...) Sector 56, Administrative and Support, Waste Management and Remediation Services. As part of its ongoing...

State of practice for concrete cylinder match curing and effect of test cylinder size.

DOT National Transportation Integrated Search

2014-01-01

The prestressed concrete element industry is interested in exploring the application of different types of matchcuring : technologies and in using 4 x 8-in. (100 x 200-mm) cylinders to measure concrete compressive strength : instead of the standard 6...

Removal of Non-metallic Inclusions from Nickel Base Superalloys by Electromagnetic Levitation Melting in a Slag

NASA Astrophysics Data System (ADS)

Manjili, Mohsen Hajipour; Halali, Mohammad

2018-02-01

Samples of INCONEL 718 were levitated and melted in a slag by the application of an electromagnetic field. The effects of temperature, time, and slag composition on the inclusion content of the samples were studied thoroughly. Samples were compared with the original alloy to study the effect of the process on inclusions. Size, shape, and chemical composition of remaining non-metallic inclusions were investigated. The samples were prepared by Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel (ASTM E 768-99) method and the results were reported by means of the Standard Test Methods for Determining the Inclusion Content of Steel (ASTM E 45-97). Results indicated that by increasing temperature and processing time, greater level of cleanliness could be achieved, and numbers and size of the remaining inclusions decreased significantly. It was also observed that increasing calcium fluoride content of the slag helped reduce inclusion content.

Characterizations of particle size distribution of the droplets exhaled by sneeze

PubMed Central

Han, Z. Y.; Weng, W. G.; Huang, Q. Y.

2013-01-01

This work focuses on the size distribution of sneeze droplets exhaled immediately at mouth. Twenty healthy subjects participated in the experiment and 44 sneezes were measured by using a laser particle size analyser. Two types of distributions are observed: unimodal and bimodal. For each sneeze, the droplets exhaled at different time in the sneeze duration have the same distribution characteristics with good time stability. The volume-based size distributions of sneeze droplets can be represented by a lognormal distribution function, and the relationship between the distribution parameters and the physiological characteristics of the subjects are studied by using linear regression analysis. The geometric mean of the droplet size of all the subjects is 360.1 µm for unimodal distribution and 74.4 µm for bimodal distribution with geometric standard deviations of 1.5 and 1.7, respectively. For the two peaks of the bimodal distribution, the geometric mean (the geometric standard deviation) is 386.2 µm (1.8) for peak 1 and 72.0 µm (1.5) for peak 2. The influences of the measurement method, the limitations of the instrument, the evaporation effects of the droplets, the differences of biological dynamic mechanism and characteristics between sneeze and other respiratory activities are also discussed. PMID:24026469

Impacts of reform-based science in middle school classrooms

NASA Astrophysics Data System (ADS)

Ruth, Lisa Mccurry

2007-12-01

In the summer of 2005, the University of South Carolina offered a four week, summer professional development opportunity for middle school science teachers. In this institute, reform-based curricula and strategies were introduced to the teachers. Seven teachers were asked to participate in this study to assess the impacts of reformed curricula and pedagogy. Teachers administered standards-based pretests and posttests to their students before and after the specified unit of study. Teachers were videotaped teaching lessons included in the curriculum unit or teaching a lesson that addressed the same set of standards. Pretests and posttests were analyzed and effect sizes were calculated. Effect sizes ranged from a minimum of 0.57 to 3.18. Videotaped lessons were analyzed using the Reformed Teaching Observation Protocol (RTOP) developed by the Arizona Collaborative for Excellence in the Preparation of Teachers (ACEPT) project. The level of inquiry-based instruction was not found to be a primary predictor of student learning gains, but was found to be associated with teachers who implemented the curriculum and associated pedagogical techniques. Teachers who presented lessons considered highly reformed had effect sizes as high as or greater than those who continued to utilize more traditional methods of teaching, when student population differences are taken into account. These same teachers were highly successful in facilitating student-directed, scientific discussions in their classrooms as compared to teachers who did not utilize curriculum materials.

Venous leg ulcer healing with electric stimulation therapy: a pilot randomised controlled trial.

PubMed

Miller, C; McGuiness, W; Wilson, S; Cooper, K; Swanson, T; Rooney, D; Piller, N; Woodward, M

2017-03-02

Compression therapy is a gold standard treatment to promote venous leg ulcer (VLU) healing. Concordance with compression therapy is, however, often sub-optimal. The aim of this study was to evaluate the effectiveness of electric stimulation therapy (EST) to facilitate healing of VLUs among people who do not use moderate-to-high levels of compression (>25 mmHg). A pilot multicentre, single-blinded randomised controlled trial was conducted. Participants were randomised (2:1) to the intervention group or a control group where EST or a sham device was used 4 times daily for 20 minutes per session. Participants were monitored fortnightly for eight weeks. The primary outcome measure was percentage of area (wound size) change. In the 23 patients recruited, an average redution in wound size of 23.15% (standard deviation [SD]: 61.23) was observed for the control group compared with 32.67 % (SD: 42.54) for the intervention. A moderate effect size favouring the intervention group was detected from univariate [F(1,18)=1.588, p=0.224, partial eta squared=0.081] and multivariate repeated measures [F(1,18)=2.053, p=0.169, partial eta squared=0.102] analyses. The pilot study was not powered to detect statistical significance, however, the difference in healing outcomes are encouraging. EST may be an effective adjunct treatment among patients who have experienced difficulty adhering to moderate-to-high levels of compression therapy.

Student evaluations of teaching: teaching quantitative courses can be hazardous to one’s career

PubMed Central

Smibert, Dylan

2017-01-01

Anonymous student evaluations of teaching (SETs) are used by colleges and universities to measure teaching effectiveness and to make decisions about faculty hiring, firing, re-appointment, promotion, tenure, and merit pay. Although numerous studies have found that SETs correlate with various teaching effectiveness irrelevant factors (TEIFs) such as subject, class size, and grading standards, it has been argued that such correlations are small and do not undermine the validity of SETs as measures of professors’ teaching effectiveness. However, previous research has generally used inappropriate parametric statistics and effect sizes to examine and to evaluate the significance of TEIFs on personnel decisions. Accordingly, we examined the influence of quantitative vs. non-quantitative courses on SET ratings and SET based personnel decisions using 14,872 publicly posted class evaluations where each evaluation represents a summary of SET ratings provided by individual students responding in each class. In total, 325,538 individual student evaluations from a US mid-size university contributed to theses class evaluations. The results demonstrate that class subject (math vs. English) is strongly associated with SET ratings, has a substantial impact on professors being labeled satisfactory vs. unsatisfactory and excellent vs. non-excellent, and the impact varies substantially depending on the criteria used to classify professors as satisfactory vs. unsatisfactory. Professors teaching quantitative courses are far more likely not to receive tenure, promotion, and/or merit pay when their performance is evaluated against common standards. PMID:28503380

Student evaluations of teaching: teaching quantitative courses can be hazardous to one's career.

PubMed

Uttl, Bob; Smibert, Dylan

2017-01-01

Anonymous student evaluations of teaching (SETs) are used by colleges and universities to measure teaching effectiveness and to make decisions about faculty hiring, firing, re-appointment, promotion, tenure, and merit pay. Although numerous studies have found that SETs correlate with various teaching effectiveness irrelevant factors (TEIFs) such as subject, class size, and grading standards, it has been argued that such correlations are small and do not undermine the validity of SETs as measures of professors' teaching effectiveness. However, previous research has generally used inappropriate parametric statistics and effect sizes to examine and to evaluate the significance of TEIFs on personnel decisions. Accordingly, we examined the influence of quantitative vs. non-quantitative courses on SET ratings and SET based personnel decisions using 14,872 publicly posted class evaluations where each evaluation represents a summary of SET ratings provided by individual students responding in each class. In total, 325,538 individual student evaluations from a US mid-size university contributed to theses class evaluations. The results demonstrate that class subject (math vs. English) is strongly associated with SET ratings, has a substantial impact on professors being labeled satisfactory vs. unsatisfactory and excellent vs. non-excellent, and the impact varies substantially depending on the criteria used to classify professors as satisfactory vs. unsatisfactory. Professors teaching quantitative courses are far more likely not to receive tenure, promotion, and/or merit pay when their performance is evaluated against common standards.

Spaceflight Human System Standards

NASA Technical Reports Server (NTRS)

Holubec, Keith; Tillman, Barry; Connolly, Jan

2009-01-01

NASA created a new approach for human system integration and human performance standards. NASA created two documents a standard and a reference handbook. The standard is titled NASA Space Flight Human-System Standard (SFHSS) and consists of two-volumes: Volume 1- Crew Health This volume covers standards needed to support astronaut health (medical care, nutrition, sleep, exercise, etc.) Volume 2 Human Factors, Habitability and Environmental Health This volume covers the standards for system design that will maintain astronaut performance (ie., environmental factors, design of facilities, layout of workstations, and lighting requirements). It includes classic human factors requirements. The new standards document is written in terms so that it is applicable to a broad range of present and future NASA systems. The document states that all new programs prepare system-specific requirements that will meet the general standards. For example, the new standard does not specify a design should accommodate specific percentiles of a defined population. Rather, NASA-STD-3001, Volume 2 states that all programs shall prepare program-specific requirements that define the user population and their size ranges. The design shall then accommodate the full size range of those users. The companion reference handbook, Human Integration Design Handbook (HIDH), was developed to capture the design consideration information from NASA-STD-3000, and adds spaceflight lessons learned, gaps in knowledge, example solutions, and suggests research to further mature specific disciplines. The HIDH serves two major purposes: HIDH is the reference document for writing human factors requirements for specific systems. HIDH contains design guidance information that helps insure that designers create systems which safely and effectively accommodate the capabilities and limitations of space flight crews.

Standard methods for open hole tension testing of textile composites

NASA Technical Reports Server (NTRS)

Portanova, M. A.; Masters, J. E.

1995-01-01

Sizing effects have been investigated by comparing the open hole failure strengths of each of the four different braided architectures as a function of specimen thickness, hole diameter, and the ratio of specimen width to hole diameter. The data used to make these comparisons was primarily generated by Boeing. Direct comparisons of Boeing's results were made with experiments conducted at West Virginia University whenever possible. Indirect comparisons were made with test results for other 2-D braids and 3-D weaves tested by Boeing and Lockheed. In general, failure strength was found to decrease with increasing plate thickness, increase with decreasing hole size, and decreasing with decreasing width to diameter ratio. The interpretation of the sensitive to each of these geometrical parameters was complicated by scatter in the test data. For open hole tension testing of textile composites, the use of standard testing practices employed by industry, such as ASTM D5766 - Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates should provide adequate results for material comparisons studies.

Investigation of the Statistics of Pure Tone Sound Power Injection from Low Frequency, Finite Sized Sources in a Reverberant Room

NASA Technical Reports Server (NTRS)

Smith, Wayne Farrior

1973-01-01

The effect of finite source size on the power statistics in a reverberant room for pure tone excitation was investigated. Theoretical results indicate that the standard deviation of low frequency, pure tone finite sources is always less than that predicted by point source theory and considerably less when the source dimension approaches one-half an acoustic wavelength or greater. A supporting experimental study was conducted utilizing an eight inch loudspeaker and a 30 inch loudspeaker at eleven source positions. The resulting standard deviation of sound power output of the smaller speaker is in excellent agreement with both the derived finite source theory and existing point source theory, if the theoretical data is adjusted to account for experimental incomplete spatial averaging. However, the standard deviation of sound power output of the larger speaker is measurably lower than point source theory indicates, but is in good agreement with the finite source theory.

Under-estimation of Alcohol Consumption among Women At-risk for Drinking during Pregnancy

PubMed Central

Witbrodt, Jane; Kaskutas, Lee Ann; Korcha, Rachael; Armstrong, Mary Anne

2009-01-01

This study adds to a growing literature showing that definitions for “standard drinks” are often difficult to conceptualize and that people often underestimate their actual drink sizes. As part of an intervention aimed at reducing negative neonatal and maternal outcomes, insured at-risk women were asked to identify the vessels from which they drank each of 6 beverages (n=266). We calculated differences between their actual and standard drink sizes. Additionally, differences were compared to those reported in an earlier study of uninsured inner city minority women that used identical vessels methodology. Over half of the spirits, fortified wine and malt liquor drinkers underestimated the actual number of ounces their drinks contained. Most spirits drinkers (90%) and approximately three-quarters of the wine and malt liquor drinkers drank larger-than-standard drink sizes, with the median drink size 1.5 to 2.0 times larger than the standard size for those beverages. Heavier drinkers (≥3 drinks per sitting) were more likely than lighter drinkers to underestimate their drink sizes. Findings were similar to those in the previous study using identical drink size measurements. Accurately assessing true drink sizes is underscored when the social, health and epidemiologic consequences associated with miscalculation are considered. PMID:20589228

Correlation between strength properties in standard test specimens and molded phenolic parts

NASA Technical Reports Server (NTRS)

Turner, P S; Thomason, R H

1946-01-01

This report describes an investigation of the tensile, flexural, and impact properties of 10 selected types of phenolic molding materials. The materials were studied to see in what ways and to what extent their properties satisfy some assumptions on which the theory of strength of materials is based: namely, (a) isotropy, (b) linear stress-strain relationship for small strains, and (c) homogeneity. The effect of changing the dimensions of tensile and flexural specimens and the span-depth ratio in flexural tests were studied. The strengths of molded boxes and flexural specimens cut from the boxes were compared with results of tests on standard test specimens molded from the respective materials. The nonuniformity of a material, which is indicated by the coefficient of variation, affects the results of tests made with specimens of different sizes and tests with different methods of loading. The strength values were found to depend on the relationship between size and shape of the molded specimen and size and shape of the fillers. The most significant variations observed within a diversified group of materials were found to depend on the orientation of fibrous fillers. Of secondary importance was the dependence of the variability of test results on the pieces of filler incorporated into the molding powder as well as on the size of the piece. Static breaking strength tests on boxes molded from six representative phenolic materials correlated well with falling-ball impact tests on specimens cut from molded flat sheets. Good correlation was obtained with Izod impact tests on standard test specimens prepared from the molding materials. The static breaking strengths of the boxes do not correlate with the results of tensile or flexural tests on standard specimens.

Validity and sensitivity of a brief psychomotor vigilance test (PVT-B) to total and partial sleep deprivation

NASA Astrophysics Data System (ADS)

Basner, Mathias; Mollicone, Daniel; Dinges, David F.

2011-12-01

The Psychomotor Vigilance Test (PVT) objectively assesses fatigue-related changes in alertness associated with sleep loss, extended wakefulness, circadian misalignment, and time on task. The standard 10-min PVT is often considered impractical in applied contexts. To address this limitation, we developed a modified brief 3-min version of the PVT (PVT-B). The PVT-B was validated in controlled laboratory studies with 74 healthy subjects (34 female, aged 22-45 years) that participated either in a total sleep deprivation (TSD) study involving 33 h awake ( N=31 subjects) or in a partial sleep deprivation (PSD) protocol involving 5 consecutive nights of 4 h time in bed ( N=43 subjects). PVT and PVT-B were performed regularly during wakefulness. Effect sizes of 5 key PVT outcomes were larger for TSD than PSD and larger for PVT than for PVT-B for all outcomes. Effect size was largest for response speed (reciprocal response time) for both the PVT-B and the PVT in both TSD and PSD. According to Cohen's criteria, effect sizes for the PVT-B were still large (TSD) or medium to large (PSD, except for fastest 10% RT). Compared to the 70% decrease in test duration the 22.7% (range 6.9-67.8%) average decrease in effect size was deemed an acceptable trade-off between duration and sensitivity. Overall, PVT-B performance had faster response times, more false starts and fewer lapses than PVT performance (all p<0.01). After reducing the lapse threshold from 500 to 355 ms for PVT-B, mixed model ANOVAs indicated no differential sensitivity to sleep loss between PVT-B and PVT for all outcome variables (all P>0.15) but the fastest 10% response times during PSD ( P<0.001), and effect sizes increased from 1.38 to 1.49 (TSD) and 0.65 to 0.76 (PSD), respectively. In conclusion, PVT-B tracked standard 10-min PVT performance throughout both TSD and PSD, and yielded medium to large effect sizes. PVT-B may be a useful tool for assessing behavioral alertness in settings where the duration of the 10-min PVT is considered impractical, although further validation in applied settings is needed.

A better way to teach knot tying: a randomized controlled trial comparing the kinesthetic and traditional methods.

PubMed

Huang, Emily; Chern, Hueylan; O'Sullivan, Patricia; Cook, Brian; McDonald, Erik; Palmer, Barnard; Liu, Terrence; Kim, Edward

2014-10-01

Knot tying is a fundamental and crucial surgical skill. We developed a kinesthetic pedagogical approach that increases precision and economy of motion by explicitly teaching suture-handling maneuvers and studied its effects on novice performance. Seventy-four first-year medical students were randomized to learn knot tying via either the traditional or the novel "kinesthetic" method. After 1 week of independent practice, students were videotaped performing 4 tying tasks. Three raters scored deidentified videos using a validated visual analog scale. The groups were compared using analysis of covariance with practice knots as a covariate and visual analog scale score (range, 0 to 100) as the dependent variable. Partial eta-square was calculated to indicate effect size. Overall rater reliability was .92. The kinesthetic group scored significantly higher than the traditional group for individual tasks and overall, controlling for practice (all P < .004). The kinesthetic overall mean was 64.15 (standard deviation = 16.72) vs traditional 46.31 (standard deviation = 16.20; P < .001; effect size = .28). For novices, emphasizing kinesthetic suture handling substantively improved performance on knot tying. We believe this effect can be extrapolated to more complex surgical skills. Copyright © 2014 Elsevier Inc. All rights reserved.

A randomized trial testing the efficacy of modifications to the nutrition facts table on comprehension and use of nutrition information by adolescents and young adults in Canada.

PubMed

Hobin, E; Sacco, J; Vanderlee, L; White, C M; Zuo, F; Sheeshka, J; McVey, G; Fodor O'Brien, M; Hammond, D

2015-12-01

Given the proposed changes to nutrition labelling in Canada and the dearth of research examining comprehension and use of nutrition facts tables (NFts) by adolescents and young adults, our objective was to experimentally test the efficacy of modifications to NFts on young Canadians' ability to interpret, compare and mathematically manipulate nutrition information in NFts on prepackaged food. An online survey was conducted among 2010 Canadians aged 16 to 24 years drawn from a consumer sample. Participants were randomized to view two NFts according to one of six experimental conditions, using a between-groups 2 x 3 factorial design: serving size (current NFt vs. standardized serving-sizes across similar products) x percent daily value (% DV) (current NFt vs. "low/med/high" descriptors vs. colour coding). The survey included seven performance tasks requiring participants to interpret, compare and mathematically manipulate nutrition information on NFts. Separate modified Poisson regression models were conducted for each of the three outcomes. The ability to compare two similar products was significantly enhanced in NFt conditions that included standardized serving-sizes (p ≤ .001 for all). Adding descriptors or colour coding of % DV next to calories and nutrients on NFts significantly improved participants' ability to correctly interpret % DV information (p ≤ .001 for all). Providing both standardized serving-sizes and descriptors of % DV had a modest effect on participants' ability to mathematically manipulate nutrition information to calculate the nutrient content of multiple servings of a product (relative ratio = 1.19; 95% confidence limit: 1.04-1.37). Standardizing serving-sizes and adding interpretive % DV information on NFts improved young Canadians' comprehension and use of nutrition information. Some caution should be exercised in generalizing these findings to all Canadian youth due to the sampling issues associated with the study population. Further research is needed to replicate this study in a more heterogeneous sample in Canada and across a range of food products and categories.

7 CFR 966.10 - Grade and size.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE TOMATOES GROWN IN FLORIDA Order... tomatoes and size means any one of the established sizes of tomatoes as defined and set forth in U.S. Standards for Fresh Tomatoes (§§ 51.1855 to 51.1877 of this title or U.S. Consumer Standards for Fresh...

24 CFR 982.555 - Informal hearing for participant.

Code of Federal Regulations, 2010 CFR

2010-04-01

... allowance schedule. (iii) A determination of the family unit size under the PHA subsidy standards. (iv) A... appropriate for the family unit size under the PHA subsidy standards, or the PHA determination to deny the... with HQS because of the family size. (8) A determination by the PHA to exercise or not to exercise any...

77 FR 58747 - Small Business Size Standards: Real Estate and Rental and Leasing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... anchor size standards is appropriate in the current economy; whether there are gaps in SBA's methodology... independent agent), employee based costs (such as wages and payroll taxes), and material costs. For SBA's size... Estate and Rental and Leasing AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY...

77 FR 43811 - Submission for OMB Review; Comment Request-Safety Standards for Full-Size Baby Cribs and Non-Full...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... CONSUMER PRODUCT SAFETY COMMISSION Submission for OMB Review; Comment Request--Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: The Consumer Product Safety Commission (CPSC or Commission) announces...

Class Size Reduction and Academic Achievement of Low-Socioeconomic Students

ERIC Educational Resources Information Center

Rollins, Sarah E.

2013-01-01

Concern about the academic and social well-being of public education in the United States has been at the forefront of education reform. Increased class sizes, amended curriculum standards, and accountability standards have guided the way toward ways to reduce class sizes to meet the demands put upon educators. This study investigated the…

Particle size and support effects in electrocatalysis.

PubMed

Hayden, Brian E

2013-08-20

Researchers increasingly recognize that, as with standard supported heterogeneous catalysts, the activity and selectivity of supported metal electrocatalysts are influenced by particle size, particle structure, and catalyst support. Studies using model supported heterogeneous catalysts have provided information about these effects. Similarly, model electrochemical studies on supported metal electrocatalysts can provide insight into the factors determining catalytic activity. High-throughput methods for catalyst synthesis and screening can determine systematic trends in activity as a function of support and particle size with excellent statistical certainty. In this Account, we describe several such studies investigating methods for dispersing precious metals on both carbon and oxide supports, with particular emphasis on the prospects for the development of low-temperature fuel-cell electrocatalysts. One key finding is a decrease in catalytic activity with decreasing particle size independent of the support for both oxygen reduction and CO oxidation on supported gold and platinum. For these reactions, there appears to be an intrinsic particle size effect that results in a loss of activity at particle sizes below 2-3 nm. A titania support, however, also increases activity of gold particles in the electrooxidation of CO and in the reduction of oxygen, with an optimum at 3 nm particle size. This optimum may represent the superposition of competing effects: a titania-induced enhanced activity versus deactivation at small particle sizes. The titania support shows catalytic activity at potentials where carbon-supported and bulk-gold surfaces are normally oxidized and CO electrooxidation is poisoned. On the other hand, platinum on amorphous titania shows a different effect: the oxidation reduction reaction is strongly poisoned in the same particle size range. We correlated the influence of the titania support with titania-induced changes in the surface redox behavior of the platinum particles. For both supported gold and platinum particles in electrocatalysis, we observe parallels to the effects of particle size and support in the equivalent heterogeneous catalysts. Studies of model supported-metal electrocatalysts, performs efficiently using high throughput synthetic and screening methodologies, will lead to a better understanding of the mechanisms responsible for support and particle size effects in electrocatalysis, and will drive the development of more effective and robust catalysts in the future.

Usability testing and requirements derivation for EMU-compatible electrical connectors

NASA Technical Reports Server (NTRS)

Reaux, Ray A.; Griffin, Thomas J.; Lewis, Ruthan

1989-01-01

On-orbit servicing of payloads is simplified when a spacecraft has been designed for serviceability. A key design criterion for a serviceable spaceraft is standardization of electrical connectors. This paper investigates the effects of extravehicular mobility unit (EMU) glove size, connector size, and connector type on usability of electrical connectors. An experiment was conducted exploring participants' ability to mate and demate connectors in an evacuated glovebox. Independent variables were two EMU glove-sizes, five connector size groups, and seven connector types. Significant differences in performance times and heart rate changes during mate and demate operations were found. Subjective assessments of connectors were collected from participants with a usability questionnaire. The data were used to derive design recommendations for a NASA-recommended EMU-compatible electrical connector.

Word length, set size, and lexical factors: Re-examining what causes the word length effect.

PubMed

Guitard, Dominic; Gabel, Andrew J; Saint-Aubin, Jean; Surprenant, Aimée M; Neath, Ian

2018-04-19

The word length effect, better recall of lists of short (fewer syllables) than long (more syllables) words has been termed a benchmark effect of working memory. Despite this, experiments on the word length effect can yield quite different results depending on set size and stimulus properties. Seven experiments are reported that address these 2 issues. Experiment 1 replicated the finding of a preserved word length effect under concurrent articulation for large stimulus sets, which contrasts with the abolition of the word length effect by concurrent articulation for small stimulus sets. Experiment 2, however, demonstrated that when the short and long words are equated on more dimensions, concurrent articulation abolishes the word length effect for large stimulus sets. Experiment 3 shows a standard word length effect when output time is equated, but Experiments 4-6 show no word length effect when short and long words are equated on increasingly more dimensions that previous demonstrations have overlooked. Finally, Experiment 7 compared recall of a small and large neighborhood words that were equated on all the dimensions used in Experiment 6 (except for those directly related to neighborhood size) and a neighborhood size effect was still observed. We conclude that lexical factors, rather than word length per se, are better predictors of when the word length effect will occur. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Are power calculations useful? A multicentre neuroimaging study

PubMed Central

Suckling, John; Henty, Julian; Ecker, Christine; Deoni, Sean C; Lombardo, Michael V; Baron-Cohen, Simon; Jezzard, Peter; Barnes, Anna; Chakrabarti, Bhismadev; Ooi, Cinly; Lai, Meng-Chuan; Williams, Steven C; Murphy, Declan GM; Bullmore, Edward

2014-01-01

There are now many reports of imaging experiments with small cohorts of typical participants that precede large-scale, often multicentre studies of psychiatric and neurological disorders. Data from these calibration experiments are sufficient to make estimates of statistical power and predictions of sample size and minimum observable effect sizes. In this technical note, we suggest how previously reported voxel-based power calculations can support decision making in the design, execution and analysis of cross-sectional multicentre imaging studies. The choice of MRI acquisition sequence, distribution of recruitment across acquisition centres, and changes to the registration method applied during data analysis are considered as examples. The consequences of modification are explored in quantitative terms by assessing the impact on sample size for a fixed effect size and detectable effect size for a fixed sample size. The calibration experiment dataset used for illustration was a precursor to the now complete Medical Research Council Autism Imaging Multicentre Study (MRC-AIMS). Validation of the voxel-based power calculations is made by comparing the predicted values from the calibration experiment with those observed in MRC-AIMS. The effect of non-linear mappings during image registration to a standard stereotactic space on the prediction is explored with reference to the amount of local deformation. In summary, power calculations offer a validated, quantitative means of making informed choices on important factors that influence the outcome of studies that consume significant resources. PMID:24644267

Hanbury–Brown–Twiss measurements at large rapidity separations, or can we measure the proton radius in p-A collisions?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Altinoluk, Tolga; Armesto, Néstor; Beuf, Guillaume

2015-11-14

We point out that current calculations of inclusive two-particle correlations in p-A collisions based on the Color Glass Condensate approach exhibit a contribution from Hanbury–Brown–Twiss correlations. These HBT correlations are quite distinct from the standard ones, in that they are apparent for particles widely separated in rapidity. The transverse size of the emitter which is reflected in these correlations is the gluonic size of the proton. Furthermore, this raises an interesting possibility of measuring the proton size directly by the HBT effect of particle pairs produced in p-A collisions.

Scale effects in the response and failure of fiber reinforced composite laminates loaded in tension and in flexure

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Kellas, Sotiris; Morton, John

1992-01-01

The feasibility of using scale model testing for predicting the full-scale behavior of flat composite coupons loaded in tension and beam-columns loaded in flexure is examined. Classical laws of similitude are applied to fabricate and test replica model specimens to identify scaling effects in the load response, strength, and mode of failure. Experiments were performed on graphite-epoxy composite specimens having different laminate stacking sequences and a range of scaled sizes. From the experiments it was deduced that the elastic response of scaled composite specimens was independent of size. However, a significant scale effect in strength was observed. In addition, a transition in failure mode was observed among scaled specimens of certain laminate stacking sequences. A Weibull statistical model and a fracture mechanics based model were applied to predict the strength scale effect since standard failure criteria cannot account for the influence of absolute specimen size on strength.

The Effectiveness of Psychoeducational Interventions Focused on Sexuality in Cancer.

PubMed

Kim, Jung-Hee; Yang, Younghee; Hwang, Eun-Suk

2015-01-01

Although sexual health is a common concern for oncology patients, no practical guidelines to sexual intervention exist, perhaps because of a lack of systematic reviews or meta-analyses. The objectives of this study were to determine the effect size for psychoeducational intervention focused on sexuality and to compare effect sizes according to intervention outcomes and characteristic. We explored quantitative evidence for the effects of sexual intervention for cancer patients or partners by using the electronic databases. Among them, we considered 15 eligible articles. The meta-analysis provided 133 effect sizes from 15 primary studies. The analysis revealed significant improvements after intervention, with a random-effects standardized mean difference of 0.75. Psychoeducational interventions focused on sexuality after cancer diagnosis were effective for compliance (2.40), cognitive aspect (1.29), and psychological aspect (0.83). Individual-based interventions (0.85) were more effective in improving outcomes than group approach and group combined with individual intervention. With regard to intervention providers, registered nurse only (2.22) and team approach including the registered nurse (2.38) had the highest effect size. Face-to-face intervention combined with telephone or the Internet (1.04) demonstrated a higher effect size than face-to-face (0.62) and telephone (0.58) independently. We conducted an analysis of data from various subgroups of preexisting studies, obtained an overall estimate of the effectiveness of the intervention, and compared its effectiveness across variables that affect intervention outcomes. These results provide empirical data for evidence-based practice and inform the development of useful intervention programs through a comprehensive review and meta-analysis of the results.

Founder representation and effective population size in old versus young breeds-genetic diversity of Finnish and Nordic Spitz.

PubMed

Kumpulainen, M; Anderson, H; Svevar, T; Kangasvuo, I; Donner, J; Pohjoismäki, J

2017-10-01

Finnish Spitz is 130-year-old breed and has been highly popular in Finland throughout its history. Nordic Spitz is very similar to Finnish Spitz by origin and use, but is a relatively recent breed with much smaller population size. To see how breed age and breeding history have influenced the current population, we performed comprehensive population genetic analysis using pedigree data of 28,119 Finnish and 9,009 Nordic Spitzes combined with genomewide single nucleotide polymorphism (SNP) data from 135 Finnish and 110 Nordic Spitzes. We found that the Finnish Spitz has undergone repeated male bottlenecks resulting in dramatic loss of genetic diversity, reflected by 20 effective founders (f a ) and mean heterozygosity (Hz) of 0.313. The realized effective population size in the breed based on pedigree analysis (N¯ec) is 168, whereas the genetic effective population size (N eg ) computed the decay of linkage disequilibrium (r 2 ) is only 57 individuals. Nordic Spitz, although once been near extinction, has not been exposed to similar repeated bottlenecks than Finnish Spitz and had f a of 27 individuals. However, due to the smaller total population size, the breed has also smaller effective population size than Finnish Spitz (N¯ec = 98 and N eg  = 49). Interestingly, the r 2 data show that the effective population size has contracted dramatically since the establishment of the breed, emphasizing the role of breed standards as constrains for the breeding population. Despite the small population size, Nordic Spitz still maintains SNP heterozygosity levels similar to mixed breed dogs (mean Hz = 0.409). Our study demonstrates that although pedigree analyses cannot provide estimates of the present diversity within a breed, the effective population sizes inferred from them correlate with the genotyping results. The genetic relationships of the northern Spitz breeds and the benefits of the open breed registry are discussed. © 2017 Blackwell Verlag GmbH.

Aerosol delivery and humidification with the Boussignac continuous positive airway pressure device.

PubMed

Thille, Arnaud W; Bertholon, Jean-François; Becquemin, Marie-Hélène; Roy, Monique; Lyazidi, Aissam; Lellouche, François; Pertusini, Esther; Boussignac, Georges; Maître, Bernard; Brochard, Laurent

2011-10-01

A simple method for effective bronchodilator aerosol delivery while administering continuing continuous positive airway pressure (CPAP) would be useful in patients with severe bronchial obstruction. To assess the effectiveness of bronchodilator aerosol delivery during CPAP generated by the Boussignac CPAP system and its optimal humidification system. First we assessed the relationship between flow and pressure generated in the mask with the Boussignac CPAP system. Next we measured the inspired-gas humidity during CPAP, with several humidification strategies, in 9 healthy volunteers. We then measured the bronchodilator aerosol particle size during CPAP, with and without heat-and-moisture exchanger, in a bench study. Finally, in 7 patients with acute respiratory failure and airway obstruction, we measured work of breathing and gas exchange after a β(2)-agonist bronchodilator aerosol (terbutaline) delivered during CPAP or via standard nebulization. Optimal humidity was obtained only with the heat-and-moisture exchanger or heated humidifier. The heat-and-moisture exchanger had no influence on bronchodilator aerosol particle size. Work of breathing decreased similarly after bronchodilator via either standard nebulization or CPAP, but P(aO(2)) increased significantly only after CPAP aerosol delivery. CPAP bronchodilator delivery decreases the work of breathing as effectively as does standard nebulization, but produces a greater oxygenation improvement in patients with airway obstruction. To optimize airway humidification, a heat-and-moisture exchanger could be used with the Boussignac CPAP system, without modifying aerosol delivery.

The deformation mechanisms and size effects of single-crystal magnesium

NASA Astrophysics Data System (ADS)

Byer, Cynthia M.

In this work, we seek to understand the deformation mechanisms and size effects of single-crystal magnesium at the micrometer scale through both microcompression experiments and finite element simulations. Microcompression experiments are conducted to investigate the impact of initial dislocation density and orientation on size effects. Micropillars are fabricated using a focused ion beam and tested in a Nanoindenter using a diamond fiat tip as a compression platen. Two different initial dislocation densities are examined for [0001] oriented micropillars. Our results demonstrate that decreasing the initial dislocation density results in an increased size effect in terms of increased strength and stochasticity. Microcompression along the [23¯14] axis results in much lower strengths than for [0001] oriented samples. Post-mortem analysis reveals basal slip in both [0001] and [23¯14] micropillars. The application of a stochastic probability model shows good agreement between theoretical predictions and experimental results for size effects with our values of initial dislocation density and micropillar dimensions. Size effects are then incorporated into a single-crystal plasticity model (modified from Zhang and Joshi [1]) implemented in ABAQUS/STANDARD as a user-material subroutine. The model successfully captures the phenomena typically associated with size effects of increasing stochasticity and strength with decreasing specimen size and also accounts for the changing trends resulting from variations in initial dislocation density that we observe in the experiments. Finally, finite element simulations are performed with the original (traditional, without size effects) crystal plasticity model [1] to investigate the relative activities of the deformation modes of single-crystal magnesium for varying degrees of misalignment in microcompression. The simulations reveal basal activity in all micropillars, even for perfectly aligned compression along the [0001] axis. Pyramidal < c + a > activity dominates until the misalignment increases to 2°, when basal slip takes over as the dominant mode. The stress-strain curves for the case of 0° misalignment agrees well with experimental curves, indicating that good alignment was achieved during the experiments. Through this investigation, we gain a better understanding of how to control the size effects, as well as the deformation mechanisms operating at the small scale in magnesium.

7 CFR 906.340 - Container, pack, and container marking regulations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... committee for testing in connection with a research project conducted by or in cooperation with the... requirements of standard sizing: Provided, That the packing tolerances in the U.S. Standards for Grades of... sizes in Table II: Provided, That the packing tolerances in the U.S. Standards for Grades of Grapefruit...

7 CFR 906.340 - Container, pack, and container marking regulations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... committee for testing in connection with a research project conducted by or in cooperation with the... requirements of standard sizing: Provided, That the packing tolerances in the U.S. Standards for Grades of... sizes in Table II: Provided, That the packing tolerances in the U.S. Standards for Grades of Grapefruit...

7 CFR 906.340 - Container, pack, and container marking regulations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... committee for testing in connection with a research project conducted by or in cooperation with the... requirements of standard sizing: Provided, That the packing tolerances in the U.S. Standards for Grades of... sizes in Table II: Provided, That the packing tolerances in the U.S. Standards for Grades of Grapefruit...

7 CFR 906.340 - Container, pack, and container marking regulations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... committee for testing in connection with a research project conducted by or in cooperation with the... requirements of standard sizing: Provided, That the packing tolerances in the U.S. Standards for Grades of... sizes in Table II: Provided, That the packing tolerances in the U.S. Standards for Grades of Grapefruit...

36 CFR 1281.16 - What standard does NARA use for measuring building size?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false What standard does NARA use for measuring building size? 1281.16 Section 1281.16 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.16 What standard...

Comparing Short Dental Implants to Standard Dental Implants: Protocol for a Systematic Review.

PubMed

Rokn, Amir Reza; Keshtkar, Abbasali; Monzavi, Abbas; Hashemi, Kazem; Bitaraf, Tahereh

2018-01-18

Short dental implants have been proposed as a simpler, cheaper, and faster alternative for the rehabilitation of atrophic edentulous areas to avoid the disadvantages of surgical techniques for increasing bone volume. This review will compare short implants (4 to 8 mm) to standard implants (larger than 8 mm) in edentulous jaws, evaluating on the basis of marginal bone loss (MBL), survival rate, complications, and prosthesis failure. We will electronically search for randomized controlled trials comparing short dental implants to standard dental implants in the following databases: PubMed, Web of Science, EMBASE, Scopus, the Cochrane Central Register of Controlled Trials, and ClinicalTrials.gov with English language restrictions. We will manually search the reference lists of relevant reviews and the included articles in this review. The following journals will also be searched: European Journal of Oral Implantology, Clinical Oral Implants Research, and Clinical Implant Dentistry and Related Research. Two reviewers will independently perform the study selection, data extraction and quality assessment (using the Cochrane Collaboration tool) of included studies. All meta-analysis procedures including appropriate effect size combination, sub-group analysis, meta-regression, assessing publication or reporting bias will be performed using Stata (Statacorp, TEXAS) version 12.1. Short implant effectiveness will be assessed using the mean difference of MBL in terms of weighted mean difference (WMD) and standardized mean difference (SMD) using Cohen's method. The combined effect size measures in addition to the related 95% confidence intervals will be estimated by a fixed effect model. The heterogeneity of the related effect size will be assessed using a Q Cochrane test and I2 measure. The MBL will be presented by a standardized mean difference with a 95% confidence interval. The survival rate of implants, prostheses failures, and complications will be reported using a risk ratio at 95% confidence interval (P<.05). The present protocol illustrates an appropriate method to perform the systematic review and ensures transparency for the completed review. The results will be published in a peer-reviewed journal and social networks. In addition, an ethics approval is not considered necessary. PROSPERO registration number: CRD42016048363; https://www.crd.york.ac.uk/PROSPERO/ display_record.asp?ID=CRD42016048363 (Archived by WebCite at http://www.webcitation.org/6wZ7Fntry). ©Amir Reza Rokn, Abbasali Keshtkar, Abbas Monzavi, Kazem Hashemi, Tahereh Bitaraf. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 18.01.2018.

21 CFR 177.1820 - Styrene-maleic anhydride copolymers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... temperature for 1 hr utilizing particles of a size that will pass through a U.S. standard sieve No. 10 and will be held on a U.S. standard sieve No. 20 0.02 weight percent at 73 °F for 2 hr utilizing particles of a size that will pass through a U.S. standard sieve No. 10 and will be held on a U.S. standard...

15 CFR 240.3 - Permissible sizes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE STANDARDS FOR BARRELS BARRELS AND OTHER CONTAINERS FOR LIME § 240.3 Permissible sizes. Lime in barrels shall be packed only in barrels containing 280 pounds or 180...

Graphic Organizers and Students with Learning Disabilities: A Meta-Analysis

ERIC Educational Resources Information Center

Dexter, Douglas D.; Hughes, Charles A.

2011-01-01

This meta-analysis reviews experimental and quasi-experimental studies in which upper-elementary, intermediate, and secondary students with learning disabilities learned from graphic organizers. Following an exhaustive search for studies meeting specified design criteria, 55 standardized mean effect sizes were extracted from 16 articles involving…

TU-AB-BRA-04: Quantitative Radiomics: Sensitivity of PET Textural Features to Image Acquisition and Reconstruction Parameters Implies the Need for Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nyflot, MJ; Yang, F; Byrd, D

Purpose: Despite increased use of heterogeneity metrics for PET imaging, standards for metrics such as textural features have yet to be developed. We evaluated the quantitative variability caused by image acquisition and reconstruction parameters on PET textural features. Methods: PET images of the NEMA IQ phantom were simulated with realistic image acquisition noise. 35 features based on intensity histograms (IH), co-occurrence matrices (COM), neighborhood-difference matrices (NDM), and zone-size matrices (ZSM) were evaluated within lesions (13, 17, 22, 28, 33 mm diameter). Variability in metrics across 50 independent images was evaluated as percent difference from mean for three phantom girths (850,more » 1030, 1200 mm) and two OSEM reconstructions (2 iterations, 28 subsets, 5 mm FWHM filtration vs 6 iterations, 28 subsets, 8.6 mm FWHM filtration). Also, patient sample size to detect a clinical effect of 30% with Bonferroni-corrected α=0.001 and 95% power was estimated. Results: As a class, NDM features demonstrated greatest sensitivity in means (5–50% difference for medium girth and reconstruction comparisons and 10–100% for large girth comparisons). Some IH features (standard deviation, energy, entropy) had variability below 10% for all sensitivity studies, while others (kurtosis, skewness) had variability above 30%. COM and ZSM features had complex sensitivities; correlation, energy, entropy (COM) and zone percentage, short-zone emphasis, zone-size non-uniformity (ZSM) had variability less than 5% while other metrics had differences up to 30%. Trends were similar for sample size estimation; for example, coarseness, contrast, and strength required 12, 38, and 52 patients to detect a 30% effect for the small girth case but 38, 88, and 128 patients in the large girth case. Conclusion: The sensitivity of PET textural features to image acquisition and reconstruction parameters is large and feature-dependent. Standards are needed to ensure that prospective trials which incorporate textural features are properly designed to detect clinical endpoints. Supported by NIH grants R01 CA169072, U01 CA148131, NCI Contract (SAIC-Frederick) 24XS036-004, and a research contract from GE Healthcare.« less

Evaluation of a boron-nitrogen, phosphate-free fire-retardant treatment. Part III, Evaluation of full-size 2 by 4 lumber per ASTM Standard D 5664-95 Method C

Treesearch

Jerrold E. Winandy; Douglas Herdman

2003-01-01

The purpose of this work was to evaluate the effects of a new boron-nitrogen, phosphate-free fire-rerardant (FR) formulation on the initial strength of No. 1 southern pine 2 by 4 lumber and its potential for in-service thermal degradation. The lumber was evaluated according to Method C of the D 5664 standard test method. The results indicated that for lumber exposed at...

A meta-analysis of active video games on health outcomes among children and adolescents.

PubMed

Gao, Z; Chen, S; Pasco, D; Pope, Z

2015-09-01

This meta-analysis synthesizes current literature concerning the effects of active video games (AVGs) on children/adolescents' health-related outcomes. A total of 512 published studies on AVGs were located, and 35 articles were included based on the following criteria: (i) data-based research articles published in English between 1985 and 2015; (ii) studied some types of AVGs and related outcomes among children/adolescents and (iii) had at least one comparison within each study. Data were extracted to conduct comparisons for outcome measures in three separate categories: AVGs and sedentary behaviours, AVGs and laboratory-based exercise, and AVGs and field-based physical activity. Effect size for each entry was calculated with the Comprehensive Meta-Analysis software in 2015. Mean effect size (Hedge's g) and standard deviation were calculated for each comparison. Compared with sedentary behaviours, AVGs had a large effect on health outcomes. The effect sizes for physiological outcomes were marginal when comparing AVGs with laboratory-based exercises. The comparison between AVGs and field-based physical activity had null to moderate effect sizes. AVGs could yield equivalent health benefits to children/adolescents as laboratory-based exercise or field-based physical activity. Therefore, AVGs can be a good alternative for sedentary behaviour and addition to traditional physical activity and sports in children/adolescents. © 2015 World Obesity.

Matching cue size and task properties in exogenous attention.

PubMed

Burnett, Katherine E; d'Avossa, Giovanni; Sapir, Ayelet

2013-01-01

Exogenous attention is an involuntary, reflexive orienting response that results in enhanced processing at the attended location. The standard view is that this enhancement generalizes across visual properties of a stimulus. We test whether the size of an exogenous cue sets the attentional field and whether this leads to different effects on stimuli with different visual properties. In a dual task with a random-dot kinematogram (RDK) in each quadrant of the screen, participants discriminated the direction of moving dots in one RDK and localized one red dot. Precues were uninformative and consisted of either a large or a small luminance-change frame. The motion discrimination task showed attentional effects following both large and small exogenous cues. The red dot probe localization task showed attentional effects following a small cue, but not a large cue. Two additional experiments showed that the different effects on localization were not due to reduced spatial uncertainty or suppression of RDK dots in the surround. These results indicate that the effects of exogenous attention depend on the size of the cue and the properties of the task, suggesting the involvement of receptive fields with different sizes in different tasks. These attentional effects are likely to be driven by bottom-up mechanisms in early visual areas.

13 CFR 107.700 - Compliance with size standards in part 121 of this chapter as a condition of Assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES Financing of Small Businesses by Licensees Determining the Eligibility of A Small Business for Sbic Financing § 107.700 Compliance with size... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Compliance with size standards in...

Effective size of certain macroscopic quantum superpositions.

PubMed

Dür, Wolfgang; Simon, Christoph; Cirac, J Ignacio

2002-11-18

Several experiments and experimental proposals for the production of macroscopic superpositions naturally lead to states of the general form /phi(1)>( multiply sign in circle N)+/phi 2 >( multiply sign in circle N), where the number of subsystems N is very large, but the states of the individual subsystems have large overlap, // 2=1-epsilon 2. We propose two different methods for assigning an effective particle number to such states, using ideal Greenberger-Horne-Zeilinger states of the form /0>( multiply sign in circle n)+/1>( multiply sign in circle n) as a standard of comparison. The two methods are based on decoherence and on a distillation protocol, respectively. Both lead to an effective size n of the order of N epsilon 2.

Gravitational Effects on Closed-Cellular-Foam Microstructure

NASA Technical Reports Server (NTRS)

Noever, David A.; Cronise, Raymond J.; Wessling, Francis C.; McMannus, Samuel P.; Mathews, John; Patel, Darayas

1996-01-01

Polyurethane foam has been produced in low gravity for the first time. The cause and distribution of different void or pore sizes are elucidated from direct comparison of unit-gravity and low-gravity samples. Low gravity is found to increase the pore roundness by 17% and reduce the void size by 50%. The standard deviation for pores becomes narrower (a more homogeneous foam is produced) in low gravity. Both a Gaussian and a Weibull model fail to describe the statistical distribution of void areas, and hence the governing dynamics do not combine small voids in either a uniform or a dependent fashion to make larger voids. Instead, the void areas follow an exponential law, which effectively randomizes the production of void sizes in a nondependent fashion consistent more with single nucleation than with multiple or combining events.

Investigation of writing error in staggered heated-dot magnetic recording systems

NASA Astrophysics Data System (ADS)

Tipcharoen, W.; Warisarn, C.; Tongsomporn, D.; Karns, D.; Kovintavewat, P.

2017-05-01

To achieve an ultra-high storage capacity, heated-dot magnetic recording (HDMR) has been proposed, which heats a bit-patterned medium before recording data. Generally, an error during the HDMR writing process comes from several sources; however, we only investigate the effects of staggered island arrangement, island size fluctuation caused by imperfect fabrication, and main pole position fluctuation. Simulation results demonstrate that a writing error can be minimized by using a staggered array (hexagonal lattice) instead of a square array. Under the effect of main pole position fluctuation, the writing error is higher than the system without main pole position fluctuation. Finally, we found that the error percentage can drop below 10% when the island size is 8.5 nm and the standard deviation of the island size is 1 nm in the absence of main pole jitter.

Genotoxicity investigations on nanomaterials.

PubMed

Oesch, Franz; Landsiedel, Robert

2012-07-01

This review is based on the lecture presented at the April 2010 nanomaterials safety assessment Postsatellite to the 2009 EUROTOX Meeting and summarizes genotoxicity investigations on nanomaterials published in the open scientific literature (up to 2008). Special attention is paid to the relationship between particle size and positive versus negative outcome, as well as the dependence of the outcome on the test used. Salient conclusions and outstanding recommendations emerging from the information summarized in this review are as follows: recognize that nanomaterials are not all the same; therefore know and document what nanomaterial has been tested and in what form; take nanomaterials specific properties into account; in order to make your results comparable with those of others and on other nanomaterials: use or at least include in your studies standardized methods; use in vivo studies to put in vitro results into perspective; take uptake and distribution of the nanomaterial into account; and in order to become able to make extrapolations to risk for human: learn about the mechanism of nanomaterials genotoxic effects. Past experience with standard non-nanosubstances already had shown that mechanisms of genotoxic effects can be complex and their elucidation can be demanding, while there often is an immediate need to assess the genotoxic hazard. Thus, a practical and pragmatic approach to genotoxicity investigations of novel nanomaterials is the use of a battery of standard genotoxicity testing methods covering a wide range of mechanisms. Application of these standard methods to nanomaterials demands, however, adaptations, and the interpretation of results from the genotoxicity testing of nanomaterials needs additional considerations exceeding those used for standard size materials.

Characterization of Particle Size Standard NIST 1019b with SynchrotronX-ray Microtomography and Digital Data Extraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedrich, Jon M.; Rivers, Mark L.; Perlowitz, Michael A.

We show that synchrotron x-ray microtomography ({mu}CT) followed by digital data extraction can be used to examine the size distribution and particle morphologies of the polydisperse (750 to 2450 {micro}m diameter) particle size standard NIST 1019b. Our size distribution results are within errors of certified values with data collected at 19.5 {micro}m/voxel. One of the advantages of using {mu}CT to investigate the particles examined here is that the morphology of the glass beads can be directly examined. We use the shape metrics aspect ratio and sphericity to examine of individual standard beads morphologies as a function of spherical equivalent diameters.more » We find that the majority of standard beads possess near-spherical aspect ratios and sphericities, but deviations are present at the lower end of the size range. The majority (> 98%) of particles also possess an equant form when examined using a common measure of equidimensionality. Although the NIST 1019b standard consists of loose particles, we point out that an advantage of {mu}CT is that coherent materials comprised of particles can be examined without disaggregation.« less

Weighted mining of massive collections of [Formula: see text]-values by convex optimization.

PubMed

Dobriban, Edgar

2018-06-01

Researchers in data-rich disciplines-think of computational genomics and observational cosmology-often wish to mine large bodies of [Formula: see text]-values looking for significant effects, while controlling the false discovery rate or family-wise error rate. Increasingly, researchers also wish to prioritize certain hypotheses, for example, those thought to have larger effect sizes, by upweighting, and to impose constraints on the underlying mining, such as monotonicity along a certain sequence. We introduce Princessp , a principled method for performing weighted multiple testing by constrained convex optimization. Our method elegantly allows one to prioritize certain hypotheses through upweighting and to discount others through downweighting, while constraining the underlying weights involved in the mining process. When the [Formula: see text]-values derive from monotone likelihood ratio families such as the Gaussian means model, the new method allows exact solution of an important optimal weighting problem previously thought to be non-convex and computationally infeasible. Our method scales to massive data set sizes. We illustrate the applications of Princessp on a series of standard genomics data sets and offer comparisons with several previous 'standard' methods. Princessp offers both ease of operation and the ability to scale to extremely large problem sizes. The method is available as open-source software from github.com/dobriban/pvalue_weighting_matlab (accessed 11 October 2017).

Coronary artery calcium: a multi-institutional, multimanufacturer international standard for quantification at cardiac CT.

PubMed

McCollough, Cynthia H; Ulzheimer, Stefan; Halliburton, Sandra S; Shanneik, Kaiss; White, Richard D; Kalender, Willi A

2007-05-01

To develop a consensus standard for quantification of coronary artery calcium (CAC). A standard for CAC quantification was developed by a multi-institutional, multimanufacturer international consortium of cardiac radiologists, medical physicists, and industry representatives. This report specifically describes the standardization of scan acquisition and reconstruction parameters, the use of patient size-specific tube current values to achieve a prescribed image noise, and the use of the calcium mass score to eliminate scanner- and patient size-based variations. An anthropomorphic phantom containing calibration inserts and additional phantom rings were used to simulate small, medium-size, and large patients. The three phantoms were scanned by using the recommended protocols for various computed tomography (CT) systems to determine the calibration factors that relate measured CT numbers to calcium hydroxyapatite density and to determine the tube current values that yield comparable noise values. Calculation of the calcium mass score was standardized, and the variance in Agatston, volume, and mass scores was compared among CT systems. Use of the recommended scanning parameters resulted in similar noise for small, medium-size, and large phantoms with all multi-detector row CT scanners. Volume scores had greater interscanner variance than did Agatston and calcium mass scores. Use of a fixed calcium hydroxyapatite density threshold (100 mg/cm(3)), as compared with use of a fixed CT number threshold (130 HU), reduced interscanner variability in Agatston and calcium mass scores. With use of a density segmentation threshold, the calcium mass score had the smallest variance as a function of patient size. Standardized quantification of CAC yielded comparable image noise, spatial resolution, and mass scores among different patient sizes and different CT systems and facilitated reduced radiation dose for small and medium-size patients.

The Power of Low Back Pain Trials: A Systematic Review of Power, Sample Size, and Reporting of Sample Size Calculations Over Time, in Trials Published Between 1980 and 2012.

PubMed

Froud, Robert; Rajendran, Dévan; Patel, Shilpa; Bright, Philip; Bjørkli, Tom; Eldridge, Sandra; Buchbinder, Rachelle; Underwood, Martin

2017-06-01

A systematic review of nonspecific low back pain trials published between 1980 and 2012. To explore what proportion of trials have been powered to detect different bands of effect size; whether there is evidence that sample size in low back pain trials has been increasing; what proportion of trial reports include a sample size calculation; and whether likelihood of reporting sample size calculations has increased. Clinical trials should have a sample size sufficient to detect a minimally important difference for a given power and type I error rate. An underpowered trial is one within which probability of type II error is too high. Meta-analyses do not mitigate underpowered trials. Reviewers independently abstracted data on sample size at point of analysis, whether a sample size calculation was reported, and year of publication. Descriptive analyses were used to explore ability to detect effect sizes, and regression analyses to explore the relationship between sample size, or reporting sample size calculations, and time. We included 383 trials. One-third were powered to detect a standardized mean difference of less than 0.5, and 5% were powered to detect less than 0.3. The average sample size was 153 people, which increased only slightly (∼4 people/yr) from 1980 to 2000, and declined slightly (∼4.5 people/yr) from 2005 to 2011 (P < 0.00005). Sample size calculations were reported in 41% of trials. The odds of reporting a sample size calculation (compared to not reporting one) increased until 2005 and then declined (Equation is included in full-text article.). Sample sizes in back pain trials and the reporting of sample size calculations may need to be increased. It may be justifiable to power a trial to detect only large effects in the case of novel interventions. 3.

Effects of micro-sized and nano-sized WO3 on mass attenauation coefficients of concrete by using MCNPX code.

PubMed

Tekin, H O; Singh, V P; Manici, T

2017-03-01

In the present work the effect of tungsten oxide (WO 3 ) nanoparticles on mass attenauation coefficients of concrete has been investigated by using MCNPX (version 2.4.0). The validation of generated MCNPX simulation geometry has been provided by comparing the results with standard XCOM data for mass attenuation coefficients of concrete. A very good agreement between XCOM and MCNPX have been obtained. The validated geometry has been used for definition of nano-WO 3 and micro-WO 3 into concrete sample. The mass attenuation coefficients of pure concrete and WO 3 added concrete with micro-sized and nano-sized have been compared. It was observed that shielding properties of concrete doped with WO 3 increased. The results of mass attenauation coefficients also showed that the concrete doped with nano-WO 3 significanlty improve shielding properties than micro-WO 3 . It can be concluded that addition of nano-sized particles can be considered as another mechanism to reduce radiation dose. Copyright © 2016 Elsevier Ltd. All rights reserved.

77 FR 7489 - Small Business Size Standards: Professional, Technical, and Scientific Services

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... standards for the remaining industries in NAICS Sector 54. This rule also removes ``Map Drafting'' as the... for public comment in the Federal Register on March 16, 2011 (76 FR 14323), which proposed to increase the size standards for 35 industries and one sub-industry in NAICS Sector 54 and one industry in NAICS...

Relationship between internal medicine program board examination pass rates, accreditation standards, and program size.

PubMed

Falcone, John L; Gonzalo, Jed D

2014-01-19

To determine Internal Medicine residency program compliance with the Accreditation Council for Graduate Medical Education 80% pass-rate standard and the correlation between residency program size and performance on the American Board of Internal Medicine Certifying Examination. Using a cross-sectional study design from 2010-2012 American Board of Internal Medicine Certifying Examination data of all Internal Medicine residency pro-grams, comparisons were made between program pass rates to the Accreditation Council for Graduate Medical Education pass-rate standard. To assess the correlation between program size and performance, a Spearman's rho was calculated. To evaluate program size and its relationship to the pass-rate standard, receiver operative characteristic curves were calculated. Of 372 Internal Medicine residency programs, 276 programs (74%) achieved a pass rate of =80%, surpassing the Accreditation Council for Graduate Medical Education minimum standard. A weak correlation was found between residency program size and pass rate for the three-year period (p=0.19, p<0.001). The area underneath the receiver operative characteristic curve was 0.69 (95% Confidence Interval [0.63-0.75]), suggesting programs with less than 12 examinees/year are less likely to meet the minimum Accreditation Council for Graduate Medical Education pass-rate standard (sensitivity 63.8%, specificity 60.4%, positive predictive value 82.2%, p<0.001). Although a majority of Internal Medicine residency programs complied with Accreditation Council for Graduate Medical Education pass-rate standards, a quarter of the programs failed to meet this requirement. Program size is positively but weakly associated with American Board of Internal Medicine Certifying Examination performance, suggesting other unidentified variables significantly contribute to program performance.

Citywide cluster randomized trial to restore blighted vacant land and its effects on violence, crime, and fear

Treesearch

Charles C. Branas; Eugenia South; Michelle C. Kondo; Bernadette C. Hohl; Philippe Bourgois; Douglas J. Wiebe; John M. MacDonald

2018-01-01

Vacant and blighted urban land is a widespread and potentially risky environmental condition encountered by millions of people on a daily basis. About 15% of the land in US cities is deemed vacant or abandoned, an area roughly the size of Switzerland. In a citywide cluster randomized controlled trial, we investigated the effects of standardized, reproducible...

The usefulness of a stretch-polyester pouch to encase implanted pacemakers and defibrillators.

PubMed

Parsonnet, V; Bernstein, A D; Neglia, D; Omar, A

1994-12-01

This study was undertaken to assess the effects of enclosing permanent pacemaker and ICD pulse generators in a stretch-polyester pouch prior to implantation. Follow-up of 223 patients with oversized pacemakers and with ICDs and 344 with standard-sized pacemaker pulse generators showed that the pouch was effective in decreasing the frequency of pulse generator migration and extrusion.

Bayesian Estimation Supersedes the "t" Test

ERIC Educational Resources Information Center

Kruschke, John K.

2013-01-01

Bayesian estimation for 2 groups provides complete distributions of credible values for the effect size, group means and their difference, standard deviations and their difference, and the normality of the data. The method handles outliers. The decision rule can accept the null value (unlike traditional "t" tests) when certainty in the estimate is…

An Overview of the Results on Consumption, Health, and Social Behavior

ERIC Educational Resources Information Center

Baumol, William J.

1974-01-01

The consumption effects, health, social activities, and family size of families eligible for or receiving subsidies such as negative income tax (Graduated Work Incentive Experiment-New Jersey, Pennsylvania) did not change significantly; however, the support program apparently produced an improvement in housing standards and an increase in home…

Measuring droplet size of agriuclutral spray nozzles - Measurement distance and airspeed effects

USDA-ARS?s Scientific Manuscript database

With a number of new spray testing laboratories going into operation within the U.S. and each gearing up to measure spray atomization from agricultural spray nozzles using laser diffraction, establishing and following a set of scientific standard procedures is crucial to long term data generation an...

Learning with Concept and Knowledge Maps: A Meta-Analysis

ERIC Educational Resources Information Center

Nesbit, John C.; Adesope, Olusola O.

2006-01-01

This meta-analysis reviews experimental and quasi-experimental studies in which students learned by constructing, modifying, or viewing node-link diagrams. Following an exhaustive search for studies meeting specified design criteria, 67 standardized mean difference effect sizes were extracted from 55 studies involving 5,818 participants. Students…

Tests of Mediation: Paradoxical Decline in Statistical Power as a Function of Mediator Collinearity

ERIC Educational Resources Information Center

Beasley, T. Mark

2014-01-01

Increasing the correlation between the independent variable and the mediator ("a" coefficient) increases the effect size ("ab") for mediation analysis; however, increasing a by definition increases collinearity in mediation models. As a result, the standard error of product tests increase. The variance inflation caused by…

Effects of Water Hardness on Spray Droplet Size Under Aerial Application Conditions

DTIC Science & Technology

2008-01-01

Nonimaging Light‐Scattering Instruments (ASTM, 2003). Table 1. Spray formulations for water hardness levels. Hardness (ppm) Tank, L (gal) Kocide, kg (lb...characteristics in a spray using optical nonimaging light‐scattering instruments. W. Conshohocken, Pa.: ASTM Intl. ASTM. 2004. E1620‐97. Standard

Filtration Effects Due to Bioassay Cage Design and Screen Type

DTIC Science & Technology

2010-01-01

Optical Nonimaging Light- Scattering Instruments (ASTM, 2003). Droplet sizing data included volume median diam (DV50), and the 10% and 90% diam (DV10 and...optical nonimaging light-scattering instru- ments. In: Annual book of ASTM standards. West Conshohocken, PA: American Society for Testing and Materials

How accurate is the Pearson r-from-Z approximation? A Monte Carlo simulation study.

PubMed

Hittner, James B; May, Kim

2012-01-01

The Pearson r-from-Z approximation estimates the sample correlation (as an effect size measure) from the ratio of two quantities: the standard normal deviate equivalent (Z-score) corresponding to a one-tailed p-value divided by the square root of the total (pooled) sample size. The formula has utility in meta-analytic work when reports of research contain minimal statistical information. Although simple to implement, the accuracy of the Pearson r-from-Z approximation has not been empirically evaluated. To address this omission, we performed a series of Monte Carlo simulations. Results indicated that in some cases the formula did accurately estimate the sample correlation. However, when sample size was very small (N = 10) and effect sizes were small to small-moderate (ds of 0.1 and 0.3), the Pearson r-from-Z approximation was very inaccurate. Detailed figures that provide guidance as to when the Pearson r-from-Z formula will likely yield valid inferences are presented.

Quality assessment for recycling aggregates from construction and demolition waste: An image-based approach for particle size estimation.

PubMed

Di Maria, Francesco; Bianconi, Francesco; Micale, Caterina; Baglioni, Stefano; Marionni, Moreno

2016-02-01

The size distribution of aggregates has direct and important effects on fundamental properties of construction materials such as workability, strength and durability. The size distribution of aggregates from construction and demolition waste (C&D) is one of the parameters which determine the degree of recyclability and therefore the quality of such materials. Unfortunately, standard methods like sieving or laser diffraction can be either very time consuming (sieving) or possible only in laboratory conditions (laser diffraction). As an alternative we propose and evaluate the use of image analysis to estimate the size distribution of aggregates from C&D in a fast yet accurate manner. The effectiveness of the procedure was tested on aggregates generated by an existing C&D mechanical treatment plant. Experimental comparison with manual sieving showed agreement in the range 81-85%. The proposed technique demonstrated potential for being used on on-line systems within mechanical treatment plants of C&D. Copyright © 2015 Elsevier Ltd. All rights reserved.

Three Essays In and Tests of Theoretical Urban Economics

NASA Astrophysics Data System (ADS)

Zhao, Weihua

This dissertation consists of three essays on urban economics. The three essays are related to urban spatial structure change, energy consumption, greenhouse gas emissions, and housing redevelopment. Chapter 1 answers the question: Does the classic Standard Urban Model still describe the growth of cities? Chapter 2 derives the implications of telework on urban spatial structure, energy consumption, and greenhouse gas emissions. Chapter 3 investigates the long run effects of minimum lot size zoning on neighborhood redevelopment. Chapter 1 identifies a new implication of the classic Standard Urban Model, the "unitary elasticity property (UEP)", which is the sum of the elasticity of central density and the elasticity of land area with respect to population change is approximately equal to unity. When this implication of the SUM is tested, it fits US cities fairly well. Further analysis demonstrates that topographic barriers and age of housing stock are the key factors explaining deviation from the UEP. Chapter 2 develops a numerical urban simulation model with households that are able to telework to investigate the urban form, congestion, energy consumption and greenhouse gas emission implications of telework. Simulation results suggest that by reducing transportation costs, telework causes sprawl, with associated longer commutes and consumption of larger homes, both of which increase energy consumption. Overall effects depend on who captures the gains from telework (workers versus firms), urban land use regulation such as height limits or greenbelts, and the fraction of workers participating in telework. The net effects of telework on energy use and GHG emissions are generally negligible. Chapter 3 applies dynamic programming to investigate the long run effects of minimum lot size zoning on neighborhood redevelopment. With numerical simulation, comparative dynamic results show that minimum lot size zoning can delay initial land conversion and slow down demolition and housing redevelopment. Initially, minimum lot size zoning is not binding. However, as city grows, it becomes binding and can effectively distort housing supply. It can lower both floor area ratio and residential density, and reduce aggregate housing supply. Overall, minimum lot size zoning can stabilize the path of structure/land ratios, housing service levels, structure density, and housing prices. In addition, minimum lot size zoning provides more incentive for developer to maintain the building, slow structure deterioration, and raise the minimum level of housing services provided over the life cycle of development.

Closed-form confidence intervals for functions of the normal mean and standard deviation.

PubMed

Donner, Allan; Zou, G Y

2012-08-01

Confidence interval methods for a normal mean and standard deviation are well known and simple to apply. However, the same cannot be said for important functions of these parameters. These functions include the normal distribution percentiles, the Bland-Altman limits of agreement, the coefficient of variation and Cohen's effect size. We present a simple approach to this problem by using variance estimates recovered from confidence limits computed for the mean and standard deviation separately. All resulting confidence intervals have closed forms. Simulation results demonstrate that this approach performs very well for limits of agreement, coefficients of variation and their differences.

13 CFR 121.702 - What size standards are applicable to the SBIR program?

Code of Federal Regulations, 2010 CFR

2010-01-01

... Requirements for the Small Business Innovation Research (sbir) Program § 121.702 What size standards are... Innovation Research (SBIR) program, a business concern must meet the requirements of paragraphs (a) and (b...

Game-based digital interventions for depression therapy: a systematic review and meta-analysis.

PubMed

Li, Jinhui; Theng, Yin-Leng; Foo, Schubert

2014-08-01

The aim of this study was to review the existing literature on game-based digital interventions for depression systematically and examine their effectiveness through a meta-analysis of randomized controlled trials (RCTs). Database searching was conducted using specific search terms and inclusion criteria. A standard meta-analysis was also conducted of available RCT studies with a random effects model. The standard mean difference (Cohen's d) was used to calculate the effect size of each study. Nineteen studies were included in the review, and 10 RCTs (eight studies) were included in the meta-analysis. Four types of game interventions-psycho-education and training, virtual reality exposure therapy, exercising, and entertainment-were identified, with various types of support delivered and populations targeted. The meta-analysis revealed a moderate effect size of the game interventions for depression therapy at posttreatment (d=-0.47 [95% CI -0.69 to -0.24]). A subgroup analysis showed that interventions based on psycho-education and training had a smaller effect than those based on the other forms, and that self-help interventions yielded better outcomes than supported interventions. A higher effect was achieved when a waiting list was used as the control. The review and meta-analysis support the effectiveness of game-based digital interventions for depression. More large-scale, high-quality RCT studies with sufficient long-term data for treatment evaluation are needed.

Game-Based Digital Interventions for Depression Therapy: A Systematic Review and Meta-Analysis

PubMed Central

Theng, Yin-Leng; Foo, Schubert

2014-01-01

Abstract The aim of this study was to review the existing literature on game-based digital interventions for depression systematically and examine their effectiveness through a meta-analysis of randomized controlled trials (RCTs). Database searching was conducted using specific search terms and inclusion criteria. A standard meta-analysis was also conducted of available RCT studies with a random effects model. The standard mean difference (Cohen's d) was used to calculate the effect size of each study. Nineteen studies were included in the review, and 10 RCTs (eight studies) were included in the meta-analysis. Four types of game interventions—psycho-education and training, virtual reality exposure therapy, exercising, and entertainment—were identified, with various types of support delivered and populations targeted. The meta-analysis revealed a moderate effect size of the game interventions for depression therapy at posttreatment (d=−0.47 [95% CI −0.69 to −0.24]). A subgroup analysis showed that interventions based on psycho-education and training had a smaller effect than those based on the other forms, and that self-help interventions yielded better outcomes than supported interventions. A higher effect was achieved when a waiting list was used as the control. The review and meta-analysis support the effectiveness of game-based digital interventions for depression. More large-scale, high-quality RCT studies with sufficient long-term data for treatment evaluation are needed. PMID:24810933

13 CFR 126.616 - What requirements must a joint venture satisfy to submit an offer on a HUBZone contract?

Code of Federal Regulations, 2010 CFR

2010-01-01

... procurement having a revenue-based size standard, the procurement exceeds half the size standard corresponding to the NAICS code assigned to the contract; and (ii) For a procurement having an employee-based size... for the purpose of submitting an offer for a HUBZone contract. The joint venture itself need not be...

36 CFR 1281.16 - What standard does NARA use for measuring building size?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false What standard does NARA use... does NARA use for measuring building size? For purposes of 44 U.S.C. 2112(g)(3) and (4), and this part... measuring the size of the facility and the value for calculating the endowment. The architectural and design...

The effects of laboratory housing and spatial enrichment on brain size and metabolic rate in the eastern mosquitofish, Gambusia holbrooki

PubMed Central

Turschwell, Mischa P.; White, Craig R.

2016-01-01

ABSTRACT It has long been hypothesised that there is a functional correlation between brain size and metabolic rate in vertebrates. The present study tested this hypothesis in wild-caught adult mosquitofish Gambusia holbrooki by testing for an intra-specific association between resting metabolic rate (RMR) and brain size while controlling for variation in body size, and through the examination of the effects of spatial enrichment and laboratory housing on body mass-independent measures of brain size and RMR. Controlling for body mass, there was no relationship between brain size and RMR in wild-caught fish. Contrary to predictions, spatial enrichment caused a decrease in mass-independent brain size, highlighting phenotypic plasticity in the adult brain. As expected, after controlling for differences in body size, wild-caught fish had relatively larger brains than fish that had been maintained in the laboratory for a minimum of six weeks, but wild-caught fish also had significantly lower mass-independent RMR. This study demonstrates that an organisms' housing environment can cause significant plastic changes to fitness related traits including brain size and RMR. We therefore conclude that current standard laboratory housing conditions may cause captive animals to be non-representative of their wild counterparts, potentially undermining the transferability of previous laboratory-based studies of aquatic ectothermic vertebrates to wild populations. PMID:26794608

How big is a food portion? A pilot study in Australian families.

PubMed

Collins, Clare E; Bucher, Tamara; Taylor, Aimee; Pezdirc, Kristine; Lucas, Hannah; Watson, Jane; Rollo, Megan; Duncanson, Kerith; Hutchesson, Melinda J; Burrows, Tracy

2015-08-01

It is not known whether individuals can accurately estimate the portion size of foods usually consumed relative to standard serving sizes in national food selection guides. The aim of the present cross-sectional pilot study was to quantify what adults and children deem a typical portion for a variety of foods and compare these with the serving sizes specified in the Australian Guide to Healthy Eating (AGHE). Adults and children were independently asked to serve out their typical portion of 10 common foods (rice, pasta, breakfast cereal, chocolate, confectionary, ice cream, meat, vegetables, soft drink and milk). They were also asked to serve what they perceived a small, medium and large portion of each food to be. Each portion was weighed and recorded by an assessor and compared with the standard AGHE serving sizes. Twenty-one individuals (nine mothers, one father, 11 children) participated in the study. There was a large degree of variability in portion sizes measured out by both parents and children, with means exceeding the standard AGHE serving size for all items, except for soft drink and milk, where mean portion sizes were less than the AGHE serving size. The greatest mean overestimations were for pasta (155%; mean 116 g; range 94-139 g) and chocolate (151%; mean 38 g; range 25-50 g), each of which represented approximately 1.5 standard AGHE servings. The findings of the present study indicate that there is variability between parents' and children's estimation of typical portion sizes compared with national recommendations. SO WHAT? Dietary interventions to improve individuals' dietary patterns should target education regarding portion size.

Effectiveness of Rehabilitation Interventions to Improve Gait Speed in Children With Cerebral Palsy: Systematic Review and Meta-analysis

PubMed Central

Bodkin, Amy Winter; Bjornson, Kristie; Hobbs, Amy; Soileau, Mallary; Lahasky, Kay

2016-01-01

Background Children with cerebral palsy (CP) have decreased gait speeds, which can negatively affect their community participation and quality of life. However, evidence for effective rehabilitation interventions to improve gait speed remains unclear. Purpose The purpose of this study was to determine the effectiveness of interventions for improving gait speed in ambulatory children with CP. Data Sources MEDLINE/PubMed, CINAHL, ERIC, and PEDro were searched from inception through April 2014. Study Selection The selected studies were randomized controlled trials or had experimental designs with a comparison group, included a physical therapy or rehabilitation intervention for children with CP, and reported gait speed as an outcome measure. Data Extraction Methodological quality was assessed by PEDro scores. Means, standard deviations, and change scores for gait speed were extracted. General study information and dosing parameters (frequency, duration, intensity, and volume) of the intervention were recorded. Data Synthesis Twenty-four studies were included. Three categories of interventions were identified: gait training (n=8), resistance training (n=9), and miscellaneous (n=7). Meta-analysis showed that gait training was effective in increasing gait speed, with a standardized effect size of 0.92 (95% confidence interval=0.19, 1.66; P=.01), whereas resistance training was shown to have a negligible effect (effect size=0.06; 95% confidence interval=−0.12, 0.25; P=.51). Effect sizes from negative to large were reported for studies in the miscellaneous category. Limitations Gait speed was the only outcome measure analyzed. Conclusions Gait training was the most effective intervention in improving gait speed for ambulatory children with CP. Strength training, even if properly dosed, was not shown to be effective in improving gait speed. Velocity training, electromyographic biofeedback training, and whole-body vibration were effective in improving gait speed in individual studies and warrant further investigation. PMID:27313240

Preparation and characterization of nanosilica from oil shale ash.

PubMed

Li, Jinhong; Qian, Tingting; Tong, Lingxin; Shen, Jie

2014-05-01

Nano-sized silica powders was prepared using oil shale ash (OSA) as starting materials. A combined process was proposed for the utilization of OSA in the production of the nanosilica, including three stages: calcination, alkaline leaching and carbon dioxide separation. Effects of the calcining temperature, sodium hydroxide concentration and holding time on the desilication ratio were investigated. The microstructure and morphologies of the nano-sized silica were characterized by X-ray diffraction, transmission electron microscopy, and Brunauer-Emmett-Teller nitrogen-gas adsorption method. The results indicated that the obtained powders with particle size of about 40 nm are homegeneously dispersed and its specific surface area is 387 m2/g. The properties of the nano-sized silica powder meet the requirements of the Chinese Chemical Industry Standard HG/T 3061-1999.

The hearing aid effect in 2013.

PubMed

Rauterkus, Erik P; Palmer, Catherine V

2014-10-01

The hearing aid effect is the term used to describe the assignment of negative attributes to individuals using hearing aids. The effect was first empirically identified in 1977 when it was reported that adults rating young children with and without hearing aids assigned negative attributes to the children depicted with hearing aids. Investigations in the 1980s and 1990s reported mixed results related to the extent of the hearing aid effect but continued to identify, on average, some negative attributes assigned to individuals wearing hearing aids. The specific aim of this research was to investigate whether the hearing aid effect has diminished in the past several decades by replicating the methods of previous studies for testing the hearing aid effect while using updated devices. Five device configurations were rated across eight attributes. RESULTS for each attribute were considered separately. A total of 24 adults judged pictures of young men wearing various ear level technologies across 8 attributes on a 7-point Likert scale. Five young men between ages 15 and 17 yr were photographed wearing each of five device configurations including (1) a standard-sized behind-the-ear (BTE) hearing aid coupled to an earmold with #13 tubing, (2) a mini-BTE hearing aid with a slim tube open-fit configuration, (3) a completely-in-the-canal hearing aid that could not be seen because of its location in the ear canal, (4) an earbud, and (5) a Bluetooth receiver. The 24 raters saw pictures of each of the 5 young men with each wearing one of the 5 devices so that devices and young men were never judged twice by the same observer. All judgments of each device, regardless of the young man modeling the device, were combined in the data analysis. The effect of device types on judgments was tested using a one-way between-participant analysis of variance. There was a significant difference on the judgment of age and trustworthiness level among the five devices. However, our post hoc analysis revealed that only two significant effects were present. People wearing a completely-in-the-canal aid (nothing visible in the ear) were rated significantly older than people wearing an earbud, and people wearing the standard-size BTE with earmold were rated significantly more trustworthy than people who wore the Bluetooth device. It was hypothesized that the hearing aid effect would be diminished in 2013 compared with data reported in the past. This proved to be the case, as no hearing aid condition was rated as more negative than any of the non-hearing aid device conditions. In fact, models wearing the standard-size BTE with earmold were rated as more trustworthy than models wearing the Bluetooth device. The standard-sized BTE with earmold condition is the configuration that can be directly compared with previous research because similar devices were used in those studies. These results indicate that the hearing aid effect has diminished, if not completely disappeared, in the 21st century. American Academy of Audiology.

Sample size calculations for randomized clinical trials published in anesthesiology journals: a comparison of 2010 versus 2016.

PubMed

Chow, Jeffrey T Y; Turkstra, Timothy P; Yim, Edmund; Jones, Philip M

2018-06-01

Although every randomized clinical trial (RCT) needs participants, determining the ideal number of participants that balances limited resources and the ability to detect a real effect is difficult. Focussing on two-arm, parallel group, superiority RCTs published in six general anesthesiology journals, the objective of this study was to compare the quality of sample size calculations for RCTs published in 2010 vs 2016. Each RCT's full text was searched for the presence of a sample size calculation, and the assumptions made by the investigators were compared with the actual values observed in the results. Analyses were only performed for sample size calculations that were amenable to replication, defined as using a clearly identified outcome that was continuous or binary in a standard sample size calculation procedure. The percentage of RCTs reporting all sample size calculation assumptions increased from 51% in 2010 to 84% in 2016. The difference between the values observed in the study and the expected values used for the sample size calculation for most RCTs was usually > 10% of the expected value, with negligible improvement from 2010 to 2016. While the reporting of sample size calculations improved from 2010 to 2016, the expected values in these sample size calculations often assumed effect sizes larger than those actually observed in the study. Since overly optimistic assumptions may systematically lead to underpowered RCTs, improvements in how to calculate and report sample sizes in anesthesiology research are needed.

Nanosatellite standardization and modularization as an asset to space weather measurements

NASA Astrophysics Data System (ADS)

Voss, D.; Carssow, D.; Fritz, T. A.; Voss, H. D.

2009-12-01

The continuity of measurements from satellites in the Magnetosphere and Ionosphere is essential for the space weather community as pointed out by the US National Space Weather Program. Challenges to space budgets and the growing dependence upon space weather prediction have opened the door for extremely small satellites to play a large role in making these measurements. Standardization allows for modularity and the ability to lower satellite cost by reusing instrumentation and satellite systems without redesigning interfaces. Use of nanosatellites gives a designer the freedom to depart from the customary larger satellite design by deploying standardized interfaces throughout the spacecraft bus. Examples from the Boston University Student Satellite for Application and Training (BUSAT), the Thunderstorms and Effects Scientific and Technology nanosatellite (TEST), and the Loss Cone Imaging Instrument (LCI) will be provided. BUSAT is a five instrument nanosatellite with a nine pixel Imaging Electron Spectrometer, a Magnetometer, an Auroral Imager, a Very Low Frequency receiver, and a Langmuir Plasma Probe. Its purpose is to further the understanding of the coupling between energetic particles originating in the magnetosphere and their subsequent effects on the Ionosphere. In addition to their space weather science objective, BUSAT’s subsystems are based on the Cubesat concept and have been standardized, enabling them to be stacked in any orientation. Subsystems are not limited in size to the basic 1U cube, but are able to be any multiple of that size in any direction.

The effect of defect cluster size and interpolation on radiographic image quality

NASA Astrophysics Data System (ADS)

Töpfer, Karin; Yip, Kwok L.

2011-03-01

For digital X-ray detectors, the need to control factory yield and cost invariably leads to the presence of some defective pixels. Recently, a standard procedure was developed to identify such pixels for industrial applications. However, no quality standards exist in medical or industrial imaging regarding the maximum allowable number and size of detector defects. While the answer may be application specific, the minimum requirement for any defect specification is that the diagnostic quality of the images be maintained. A more stringent criterion is to keep any changes in the images due to defects below the visual threshold. Two highly sensitive image simulation and evaluation methods were employed to specify the fraction of allowable defects as a function of defect cluster size in general radiography. First, the most critical situation of the defect being located in the center of the disease feature was explored using image simulation tools and a previously verified human observer model, incorporating a channelized Hotelling observer. Detectability index d' was obtained as a function of defect cluster size for three different disease features on clinical lung and extremity backgrounds. Second, four concentrations of defects of four different sizes were added to clinical images with subtle disease features and then interpolated. Twenty observers evaluated the images against the original on a single display using a 2-AFC method, which was highly sensitive to small changes in image detail. Based on a 50% just-noticeable difference, the fraction of allowed defects was specified vs. cluster size.

A feasibility study in adapting Shamos Bickel and Hodges Lehman estimator into T-Method for normalization

NASA Astrophysics Data System (ADS)

Harudin, N.; Jamaludin, K. R.; Muhtazaruddin, M. Nabil; Ramlie, F.; Muhamad, Wan Zuki Azman Wan

2018-03-01

T-Method is one of the techniques governed under Mahalanobis Taguchi System that developed specifically for multivariate data predictions. Prediction using T-Method is always possible even with very limited sample size. The user of T-Method required to clearly understanding the population data trend since this method is not considering the effect of outliers within it. Outliers may cause apparent non-normality and the entire classical methods breakdown. There exist robust parameter estimate that provide satisfactory results when the data contain outliers, as well as when the data are free of them. The robust parameter estimates of location and scale measure called Shamos Bickel (SB) and Hodges Lehman (HL) which are used as a comparable method to calculate the mean and standard deviation of classical statistic is part of it. Embedding these into T-Method normalize stage feasibly help in enhancing the accuracy of the T-Method as well as analysing the robustness of T-method itself. However, the result of higher sample size case study shows that T-method is having lowest average error percentages (3.09%) on data with extreme outliers. HL and SB is having lowest error percentages (4.67%) for data without extreme outliers with minimum error differences compared to T-Method. The error percentages prediction trend is vice versa for lower sample size case study. The result shows that with minimum sample size, which outliers always be at low risk, T-Method is much better on that, while higher sample size with extreme outliers, T-Method as well show better prediction compared to others. For the case studies conducted in this research, it shows that normalization of T-Method is showing satisfactory results and it is not feasible to adapt HL and SB or normal mean and standard deviation into it since it’s only provide minimum effect of percentages errors. Normalization using T-method is still considered having lower risk towards outlier’s effect.

Comparing Students With and Without Reading Difficulties on Reading Comprehension Assessments: A Meta-Analysis.

PubMed

Collins, Alyson A; Lindström, Esther R; Compton, Donald L

Researchers have increasingly investigated sources of variance in reading comprehension test scores, particularly with students with reading difficulties (RD). The purpose of this meta-analysis was to determine if the achievement gap between students with RD and typically developing (TD) students varies as a function of different reading comprehension response formats (e.g., multiple choice, cloze). A systematic literature review identified 82 eligible studies. All studies administered reading comprehension assessments to students with RD and TD students in Grades K-12. Hedge's g standardized mean difference effect sizes were calculated, and random effects robust variance estimation techniques were used to aggregate average weighted effect sizes for each response format. Results indicated that the achievement gap between students with RD and TD students was larger for some response formats (e.g., picture selection ES g = -1.80) than others (e.g., retell ES g = -0.60). Moreover, for multiple-choice, cloze, and open-ended question response formats, single-predictor metaregression models explored potential moderators of heterogeneity in effect sizes. No clear patterns, however, emerged in regard to moderators of heterogeneity in effect sizes across response formats. Findings suggest that the use of different response formats may lead to variability in the achievement gap between students with RD and TD students.

Dietary standards for school catering in France: serving moderate quantities to improve dietary quality without increasing the food-related cost of meals.

PubMed

Vieux, Florent; Dubois, Christophe; Allegre, Laëtitia; Mandon, Lionel; Ciantar, Laurent; Darmon, Nicole

2013-01-01

To assess the impact on food-related cost of meals to fulfill the new compulsory dietary standards for primary schools in France. A descriptive study assessed the relationship between the level of compliance with the standards of observed school meals and their food-related cost. An analytical study assessed the cost of series of meals published in professional journals, and complying or not with new dietary standards. The costs were based on prices actually paid for food used to prepare school meals. Food-related cost of meals. Parametric and nonparametric tests from a total of 42 and 120 series of 20 meals in the analytical and descriptive studies, respectively. The descriptive study indicated that meeting the standards was not related to cost. The analytical study showed that fulfilling the frequency guidelines increased the cost, whereas fulfilling the portion sizes criteria decreased it. Series of meals fully respecting the standards (ie, frequency and portion sizes) cost significantly less (-0.10 €/meal) than series not fulfilling them, because the standards recommend smaller portion sizes. Introducing portion sizes rules in dietary standards for school catering may help increase dietary quality without increasing the food cost of meals. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

SU-F-T-51: Investigating the Effect of Eye Size and Eccentricity On Normal Tissue Doses From Eye Plaque Brachytherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polsdofer, E; Crilly, R

Purpose: This study investigates the effect of eye size and eccentricity on doses to critical tissues by simulating doses in the Plaque Simulator (v. 6.3.1) software. Present OHSU plaque brachytherapy treatment focuses on delivering radiation to the tumor measured with ocular ultrasound plus a small margin and assumes the orbit has the dimensions of a “standard eye.” Accurately modeling the dimensions of the orbit requires a high resolution ocular CT. This study quantifies how standard differences in equatorial diameters and eccentricity affect calculated doses to critical structures in order to query the justification of the additional CT scan to themore » treatment planning process. Methods: Tumors of 10 mm × 10 mm × 5 mm were modeled at the 12:00:00 hour with a latitude of 45 degrees. Right eyes were modeled at a number of equatorial diameters from 17.5 to 28 mm for each of the standard non-notched COMS plaques with silastic inserts. The COMS plaques were fully loaded with uniform activity, centered on the tumor, and prescribed to a common tumor dose (85 Gy/100 hours). Variations in the calculated doses to normal structures were examined to see if the changes were significant. Results: The calculated dose to normal structures show a marked dependence on eye geometry. This is exemplified by fovea dose which more than doubled in the smaller eyes and nearly halved in the larger model. Additional significant dependence was found in plaque size on the calculated dose in spite of all plaques giving the same dose to the prescription point. Conclusion: The variation in dose with eye dimension fully justifies the addition of a high resolution ocular CT to the planning technique. Additional attention must be made to plaque size beyond simply covering the tumor when considering normal tissue dose.« less

13 CFR 121.510 - What is the size standard for leasing of Government land for uranium mining?

Code of Federal Regulations, 2012 CFR

2012-01-01

... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false What is the size standard for leasing of Government land for uranium mining? 121.510 Section 121.510 Business Credit and Assistance... standard for leasing of Government land for uranium mining? A concern is small for this purpose if it...

13 CFR 121.510 - What is the size standard for leasing of Government land for uranium mining?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false What is the size standard for leasing of Government land for uranium mining? 121.510 Section 121.510 Business Credit and Assistance... standard for leasing of Government land for uranium mining? A concern is small for this purpose if it...

13 CFR 121.510 - What is the size standard for leasing of Government land for uranium mining?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false What is the size standard for leasing of Government land for uranium mining? 121.510 Section 121.510 Business Credit and Assistance... standard for leasing of Government land for uranium mining? A concern is small for this purpose if it...

13 CFR 121.510 - What is the size standard for leasing of Government land for uranium mining?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What is the size standard for leasing of Government land for uranium mining? 121.510 Section 121.510 Business Credit and Assistance... standard for leasing of Government land for uranium mining? A concern is small for this purpose if it...

Droplet-size distribution and stability of commercial injectable lipid emulsions containing fish oil.

PubMed

Gallegos, Críspulo; Valencia, Concepción; Partal, Pedro; Franco, José M; Maglio, Omay; Abrahamsson, Malin; Brito-de la Fuente, Edmundo

2012-08-01

The droplet size of commercial fish oil-containing injectable lipid emulsions, including conformance to United States Pharmacopeia (USP) standards on fat-globule size, was investigated. A total of 18 batches of three multichamber parenteral products containing the emulsion SMOFlipid as a component were analyzed. Samples from multiple lots of the products were evaluated to determine compliance with standards on the volume-weighted percentage of fat exceeding 0.05% (PFAT(5)) specified in USP chapter 729 to ensure the physical stability of i.v. lipid emulsions. The products were also analyzed to determine the effects of various storage times (3, 6, 9, and 12 months) and storage temperatures (25, 30, and 40 °C) on product stability. Larger-size lipid particles were quantified via single-particle optical sensing (SPOS). The emulsion's droplet-size distribution was determined via laser light scattering. SPOS and light-scattering analysis demonstrated mean PFAT(5) values well below USP-specified globule-size limits for all the tested products under all study conditions. In addition, emulsion aging at any storage temperature in the range studied did not result in a significant increase of PFAT(5) values, and mean droplet-size values did not change significantly during storage of up to 12 months at temperatures of 25-40 °C. PFAT(5) values were below the USP upper limits in SMOFlipid samples from multiple lots of three multichamber products after up to 12 months of storage at 25 or 30 °C or 6 months of storage at 40 °C.

Cough aerosol in healthy participants: fundamental knowledge to optimize droplet-spread infectious respiratory disease management

PubMed Central

2012-01-01

Background The Influenza A H1N1 virus can be transmitted via direct, indirect, and airborne route to non-infected subjects when an infected patient coughs, which expels a number of different sized droplets to the surrounding environment as an aerosol. The objective of the current study was to characterize the human cough aerosol pattern with the aim of developing a standard human cough bioaerosol model for Influenza Pandemic control. Method 45 healthy non-smokers participated in the open bench study by giving their best effort cough. A laser diffraction system was used to obtain accurate, time-dependent, quantitative measurements of the size and number of droplets expelled by the cough aerosol. Results Voluntary coughs generated droplets ranging from 0.1 - 900 microns in size. Droplets of less than one-micron size represent 97% of the total number of measured droplets contained in the cough aerosol. Age, sex, weight, height and corporal mass have no statistically significant effect on the aerosol composition in terms of size and number of droplets. Conclusions We have developed a standard human cough aerosol model. We have quantitatively characterized the pattern, size, and number of droplets present in the most important mode of person-to-person transmission of IRD: the cough bioaerosol. Small size droplets (< 1 μm) predominated the total number of droplets expelled when coughing. The cough aerosol is the single source of direct, indirect and/or airborne transmission of respiratory infections like the Influenza A H1N1 virus. Study design Open bench, Observational, Cough, Aerosol study PMID:22436202

Cough aerosol in healthy participants: fundamental knowledge to optimize droplet-spread infectious respiratory disease management.

PubMed

Zayas, Gustavo; Chiang, Ming C; Wong, Eric; MacDonald, Fred; Lange, Carlos F; Senthilselvan, Ambikaipakan; King, Malcolm

2012-03-21

The Influenza A H1N1 virus can be transmitted via direct, indirect, and airborne route to non-infected subjects when an infected patient coughs, which expels a number of different sized droplets to the surrounding environment as an aerosol. The objective of the current study was to characterize the human cough aerosol pattern with the aim of developing a standard human cough bioaerosol model for Influenza Pandemic control. 45 healthy non-smokers participated in the open bench study by giving their best effort cough. A laser diffraction system was used to obtain accurate, time-dependent, quantitative measurements of the size and number of droplets expelled by the cough aerosol. Voluntary coughs generated droplets ranging from 0.1 - 900 microns in size. Droplets of less than one-micron size represent 97% of the total number of measured droplets contained in the cough aerosol. Age, sex, weight, height and corporal mass have no statistically significant effect on the aerosol composition in terms of size and number of droplets. We have developed a standard human cough aerosol model. We have quantitatively characterized the pattern, size, and number of droplets present in the most important mode of person-to-person transmission of IRD: the cough bioaerosol. Small size droplets (< 1 μm) predominated the total number of droplets expelled when coughing. The cough aerosol is the single source of direct, indirect and/or airborne transmission of respiratory infections like the Influenza A H1N1 virus. Open bench, Observational, Cough, Aerosol study. © 2012 Zayas et al; licensee BioMed Central Ltd.

Investigating the effect of sputtering conditions on the physical properties of aluminum thin film and the resulting alumina template

NASA Astrophysics Data System (ADS)

Taheriniya, Shabnam; Parhizgar, Sara Sadat; Sari, Amir Hossein

2018-06-01

To study the alumina template pore size distribution as a function of Al thin film grain size distribution, porous alumina templates were prepared by anodizing sputtered aluminum thin films. To control the grain size the aluminum samples were sputtered with the rate of 0.5, 1 and 2 Å/s and the substrate temperature was either 25, 75 or 125 °C. All samples were anodized for 120 s in 1 M sulfuric acid solution kept at 1 °C while a 15 V potential was being applied. The standard deviation value for samples deposited at room temperature but with different rates is roughly 2 nm in both thin film and porous template form but it rises to approximately 4 nm with substrate temperature. Samples with the average grain size of 13, 14, 18.5 and 21 nm respectively produce alumina templates with an average pore size of 8.5, 10, 15 and 16 nm in that order which shows the average grain size limits the average pore diameter in the resulting template. Lateral correlation length and grain boundary effect are other factors that affect the pore formation process and pore size distribution by limiting the initial current density.

A meta-analysis of the efficacy of cognitive behavior therapy on quality of life and psychological health of breast cancer survivors and patients.

PubMed

Ye, Mengfei; Du, Kanghui; Zhou, Jingying; Zhou, Quanqian; Shou, Mengna; Hu, Baiqi; Jiang, Panruo; Dong, Nan; He, Luying; Liang, Shenglin; Yu, Chaoyang; Zhang, Jian; Ding, Zhinan; Liu, Zheng

2018-03-02

The aim of this study was to examine the effect of cognitive behavior therapy (CBT) on quality of life (QOL) and psychological health of breast cancer survivors and patients. A total of 1289 references were examined from an overall literature search in PubMed, Embase, CINAHL, and the Cochrane Database of Systematic Reviews. Randomized controlled trials assessing the efficacy of CBT compared with a range of comparators in cancer survivors. We assessed the effect of CBT by using the standardized mean difference as effect size. Among 1289 abstracts and 292 full-text articles reviewed, 10 studies were included. At the posttreatment period, the pooled effect size for CBT on QOL was 0.57 (95% CI, 0.44 to 0.69; P < .001), on depression was -1.11 (95% CI, -1.28 to -0.94; P < .001), on stress was -0.40 (95% CI, -0.53 to -0.26; P < .001), on anxiety was -1.10 (95% CI, -1.27 to -0.93; P < .001), and on hyperarousal cluster of symptoms was -0.18 (95% CI, -0.30 to -0.05; P < .001). The QOL was considered statistically medium effect sizes. The depression and anxiety were considered statistically large effect sizes. Cognitive behavior therapy is an effective therapy for psychological symptoms of cancer survivors and patients, with meaningfully clinical effect sizes. These findings suggested that CBT should be used as the intervention for breast cancer survivors and patients when possible. Copyright © 2018 John Wiley & Sons, Ltd.

Law of corresponding states for open collaborations

NASA Astrophysics Data System (ADS)

Gherardi, Marco; Bassetti, Federico; Cosentino Lagomarsino, Marco

2016-04-01

We study the relation between number of contributors and product size in Wikipedia and GitHub. In contrast to traditional production, this is strongly probabilistic, but is characterized by two quantitative nonlinear laws: a power-law bound to product size for increasing number of contributors, and the universal collapse of rescaled distributions. A variant of the random-energy model shows that both laws are due to the heterogeneity of contributors, and displays an intriguing finite-size scaling property with no equivalent in standard systems. The analysis uncovers the right intensive densities, enabling the comparison of projects with different numbers of contributors on equal grounds. We use this property to expose the detrimental effects of conflicting interactions in Wikipedia.

Dense arrays of millimeter-sized glass lenses fabricated at wafer-level.

PubMed

Albero, Jorge; Perrin, Stéphane; Bargiel, Sylwester; Passilly, Nicolas; Baranski, Maciej; Gauthier-Manuel, Ludovic; Bernard, Florent; Lullin, Justine; Froehly, Luc; Krauter, Johann; Osten, Wolfgang; Gorecki, Christophe

2015-05-04

This paper presents the study of a fabrication technique of lenses arrays based on the reflow of glass inside cylindrical silicon cavities. Lenses whose sizes are out of the microfabrication standards are considered. In particular, the case of high fill factor arrays is discussed in detail since the proximity between lenses generates undesired effects. These effects, not experienced when lenses are sufficiently separated so that they can be considered as single items, are corrected by properly designing the silicon cavities. Complete topographic as well as optical characterizations are reported. The compatibility of materials with Micro-Opto-Electromechanical Systems (MOEMS) integration processes makes this technology attractive for the miniaturization of inspection systems, especially those devoted to imaging.

3D mathematical modeling of glioblastoma suggests that transdifferentiated vascular endothelial cells mediate resistance to current standard-of-care therapy

PubMed Central

Yan, Huaming; Romero-López, Mónica; Benitez, Lesly I.; Di, Kaijun; Frieboes, Hermann B.; Hughes, Christopher C. W.; Bota, Daniela A.; Lowengrub, John S.

2017-01-01

Glioblastoma (GBM), the most aggressive brain tumor in human patients, is decidedly heterogeneous and highly vascularized. Glioma stem/initiating cells (GSC) are found to play a crucial role by increasing cancer aggressiveness and promoting resistance to therapy. Recently, crosstalk between GSC and vascular endothelial cells has been shown to significantly promote GSC self-renewal and tumor progression. Further, GSC also transdifferentiate into bona-fide vascular endothelial cells (GEC), which inherit mutations present in GSC and are resistant to traditional anti-angiogenic therapies. Here we use 3D mathematical modeling to investigate GBM progression and response to therapy. The model predicted that GSC drive invasive fingering and that GEC spontaneously form a network within the hypoxic core, consistent with published experimental findings. Standard-of-care treatments using DNA-targeted therapy (radiation/chemo) together with anti-angiogenic therapies, reduced GBM tumor size but increased invasiveness. Anti-GEC treatments blocked the GEC support of GSC and reduced tumor size but led to increased invasiveness. Anti-GSC therapies that promote differentiation or disturb the stem cell niche effectively reduced tumor invasiveness and size, but were ultimately limited in reducing tumor size because GEC maintain GSC. Our study suggests that a combinatorial regimen targeting the vasculature, GSC, and GEC, using drugs already approved by the FDA, can reduce both tumor size and invasiveness and could lead to tumor eradication. PMID:28536277

Grain-size-induced weakening of H2O ices I and II and associated anisotropic recrystallization

USGS Publications Warehouse

Stern, L.A.; Durham, W.B.; Kirby, S.H.

1997-01-01

Grain-size-dependent flow mechanisms tend to be favored over dislocation creep at low differential stresses and can potentially influence the rheology of low-stress, low-strain rate environments such as those of planetary interiors. We experimentally investigated the effect of reduced grain size on the solid-state flow of water ice I, a principal component of the asthenospheres of many icy moons of the outer solar system, using techniques new to studies of this deformation regime. We fabricated fully dense ice samples of approximate grain size 2 ?? 1 ??m by transforming "standard" ice I samples of 250 ?? 50 ??m grain size to the higher-pressure phase ice II, deforming them in the ice II field, and then rapidly releasing the pressure deep into the ice I stability field. At T ??? 200 K, slow growth and rapid nucleation of ice I combine to produce a fine grain size. Constant-strain rate deformation tests conducted on these samples show that deformation rates are less stress sensitive than for standard ice and that the fine-grained material is markedly weaker than standard ice, particularly during the transient approach to steady state deformation. Scanning electron microscope examination of the deformed fine-grained ice samples revealed an unusual microstructure dominated by platelike grains that grew normal to the compression direction, with c axes preferentially oriented parallel to compression. In samples tested at T ??? 220 K the elongation of the grains is so pronounced that the samples appear finely banded, with aspect ratios of grains approaching 50:1. The anisotropic growth of these crystallographically oriented neoblasts likely contributes to progressive work hardening observed during the transient stage of deformation. We have also documented remarkably similar microstructural development and weak mechanical behavior in fine-grained ice samples partially transformed and deformed in the ice II field.

Are There Benefits from Teaching Yoga at Schools? A Systematic Review of Randomized Control Trials of Yoga-Based Interventions

PubMed Central

Ferreira-Vorkapic, C.; Feitoza, J. M.; Marchioro, M.; Simões, J.; Telles, S.

2015-01-01

Introduction. Yoga is a holistic system of varied mind-body practices that can be used to improve mental and physical health and it has been utilized in a variety of contexts and situations. Educators and schools are looking to include yoga as a cost-effective, evidence-based component of urgently needed wellness programs for their students. Objectives. The primary goal of this study was to systematically examine the available literature for yoga interventions exclusively in school settings, exploring the evidence of yoga-based interventions on academic, cognitive, and psychosocial benefits. Methods. An extensive search was conducted for studies published between 1980 and October 31, 2014 (PubMed, PsycInfo, Embase, ISI, and the Cochrane Library). Effect size analysis, through standardized mean difference and Hedges'g, allowed for the comparison between experimental conditions. Results and Conclusions. Nine randomized control trials met criteria for inclusion in this review. Effect size was found for mood indicators, tension and anxiety in the POMS scale, self-esteem, and memory when the yoga groups were compared to control. Future research requires greater standardization and suitability of yoga interventions for children. PMID:26491461

Assessment of statistical significance and clinical relevance.

PubMed

Kieser, Meinhard; Friede, Tim; Gondan, Matthias

2013-05-10

In drug development, it is well accepted that a successful study will demonstrate not only a statistically significant result but also a clinically relevant effect size. Whereas standard hypothesis tests are used to demonstrate the former, it is less clear how the latter should be established. In the first part of this paper, we consider the responder analysis approach and study the performance of locally optimal rank tests when the outcome distribution is a mixture of responder and non-responder distributions. We find that these tests are quite sensitive to their planning assumptions and have therefore not really any advantage over standard tests such as the t-test and the Wilcoxon-Mann-Whitney test, which perform overall well and can be recommended for applications. In the second part, we present a new approach to the assessment of clinical relevance based on the so-called relative effect (or probabilistic index) and derive appropriate sample size formulae for the design of studies aiming at demonstrating both a statistically significant and clinically relevant effect. Referring to recent studies in multiple sclerosis, we discuss potential issues in the application of this approach. Copyright © 2012 John Wiley & Sons, Ltd.

Emotional Freedom Techniques for Anxiety: A Systematic Review With Meta-analysis.

PubMed

Clond, Morgan

2016-05-01

Emotional Freedom Technique (EFT) combines elements of exposure and cognitive therapies with acupressure for the treatment of psychological distress. Randomized controlled trials retrieved by literature search were assessed for quality using the criteria developed by the American Psychological Association's Division 12 Task Force on Empirically Validated Treatments. As of December 2015, 14 studies (n = 658) met inclusion criteria. Results were analyzed using an inverse variance weighted meta-analysis. The pre-post effect size for the EFT treatment group was 1.23 (95% confidence interval, 0.82-1.64; p < 0.001), whereas the effect size for combined controls was 0.41 (95% confidence interval, 0.17-0.67; p = 0.001). Emotional freedom technique treatment demonstrated a significant decrease in anxiety scores, even when accounting for the effect size of control treatment. However, there were too few data available comparing EFT to standard-of-care treatments such as cognitive behavioral therapy, and further research is needed to establish the relative efficacy of EFT to established protocols.

Process Analysis of Variables for Standardization of Antifungal Susceptibility Testing of Nonfermentative Yeasts ▿

PubMed Central

Zaragoza, Oscar; Mesa-Arango, Ana C.; Gómez-López, Alicia; Bernal-Martínez, Leticia; Rodríguez-Tudela, Juan Luis; Cuenca-Estrella, Manuel

2011-01-01

Nonfermentative yeasts, such as Cryptococcus spp., have emerged as fungal pathogens during the last few years. However, standard methods to measure their antifungal susceptibility (antifungal susceptibility testing [AST]) are not completely reliable due to the impaired growth of these yeasts in standard media. In this work, we have compared the growth kinetics and the antifungal susceptibilities of representative species of nonfermentative yeasts such as Cryptococcus neoformans, Cryptococcus gattii, Cryptococcus albidus, Rhodotorula spp., Yarrowia lipolytica, Geotrichum spp., and Trichosporon spp. The effect of the growth medium (RPMI medium versus yeast nitrogen base [YNB]), glucose concentration (0.2% versus 2%), nitrogen source (ammonium sulfate), temperature (30°C versus 35°C), shaking, and inoculum size (103, 104, and 105 cells) were analyzed. The growth rate, lag phase, and maximum optical density were obtained from each growth experiment, and after multivariate analysis, YNB-based media demonstrated a significant improvement in the growth of yeasts. Shaking, an inoculum size of 105 CFU/ml, and incubation at 30°C also improved the growth kinetics of organisms. Supplementation with ammonium sulfate and with 2% glucose did not have any effect on growth. We also tested the antifungal susceptibilities of all the isolates by the reference methods of the CLSI and EUCAST, the EUCAST method with shaking, YNB under static conditions, and YNB with shaking. MIC values obtained under different conditions showed high percentages of agreement and significant correlation coefficient values between them. MIC value determinations according to CLSI and EUCAST standards were rather complicated, since more than half of isolates tested showed a limited growth index, hampering endpoint determinations. We conclude that AST conditions including YNB as an assay medium, agitation of the plates, reading after 48 h of incubation, an inoculum size of 105 CFU/ml, and incubation at 30°C made MIC determinations easier without an overestimation of MIC values. PMID:21245438

The cost-effectiveness of NBPTS teacher certification.

PubMed

Yeh, Stuart S

2010-06-01

A cost-effectiveness analysis of the National Board for Professional Teaching Standards (NBPTS) program suggests that Board certification is less cost-effective than a range of alternative approaches for raising student achievement, including comprehensive school reform, class size reduction, a 10% increase in per pupil expenditure, the use of value-added statistical methods to identify effective teachers, and the implementation of systems where student performance in math and reading is rapidly assessed 2-5 times per week. The most cost-effective approach, rapid assessment, is three magnitudes as cost-effective as Board certification.

The impact of ordinate scaling on the visual analysis of single-case data.

PubMed

Dart, Evan H; Radley, Keith C

2017-08-01

Visual analysis is the primary method for detecting the presence of treatment effects in graphically displayed single-case data and it is often referred to as the "gold standard." Although researchers have developed standards for the application of visual analysis (e.g., Horner et al., 2005), over- and underestimation of effect size magnitude is not uncommon among analysts. Several characteristics have been identified as potential contributors to these errors; however, researchers have largely focused on characteristics of the data itself (e.g., autocorrelation), paying less attention to characteristics of the graphic display which are largely in control of the analyst (e.g., ordinate scaling). The current study investigated the impact that differences in ordinate scaling, a graphic display characteristic, had on experts' accuracy in judgments regarding the magnitude of effect present in single-case percentage data. 32 participants were asked to evaluate eight ABAB data sets (2 each presenting null, small, moderate, and large effects) along with three iterations of each (32 graphs in total) in which only the ordinate scale was manipulated. Results suggest that raters are less accurate in their detection of treatment effects as the ordinate scale is constricted. Additionally, raters were more likely to overestimate the size of a treatment effect when the ordinate scale was constricted. Copyright © 2017 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Pass rates on the American Board of Family Medicine Certification Exam by residency location and size.

PubMed

Falcone, John L; Middleton, Donald B

2013-01-01

The Accreditation Council for Graduate Medical Education (ACGME) sets residency performance standards for the American Board of Family Medicine Certification Examination. This study aims are to describe the compliance of residency programs with ACGME standards and to determine whether residency pass rates depend on program size and location. In this retrospective cohort study, residency performance from 2007 to 2011 was compared with the ACGME performance standards. Simple linear regression was performed to see whether program pass rates were dependent on program size. Regional differences in performance were compared with χ(2) tests, using an α level of 0.05. Of 429 total residency programs, there were 205 (47.8%) that violate ACGME performance standards. Linear regression showed that program pass rates were positively correlated and dependent on program size (P < .001). The median pass rate per state was 86.4% (interquartile range, 82.0-90.8. χ(2) Tests showed that states in the West performed higher than the other 3 US Census Bureau Regions (all P < .001). Approximately half of the family medicine training programs do not meet the ACGME examination performance standards. Pass rates are associated with residency program size, and regional variation occurs. These findings have the potential to affect ACGME policy and residency program application patterns.

Effects of a Western-type diet on plasma lipids and other cardiometabolic risk factors in African green monkeys (Chlorocebus aethiops sabaeus).

PubMed

Jorgensen, Matthew J; Aycock, S Tyler; Clarkson, Thomas B; Kaplan, Jay R

2013-07-01

Our goal was to assess a nonhuman primate diet that mimicked the Western-type diet of humans with regard to palatability and the diet's effects on plasma lipid concentrations and other cardiometabolic risk factors. We evaluated male (n = 8) and female (n = 11) African green monkeys (vervets; Chlorocebus aethiops sabaeus) that initially were fed a standard diet. Each cohort then was divided into 2 groups, which received either standard chow or the Western diet. Food consumption and fecal quality were measured weekly. Body weight, waist circumference, and body-mass index were measured every 2 wk. CBC and clinical chemistry analyses were performed at baseline and 4 wk after the diet change. Plasma lipid concentrations, total cholesterol, HDL cholesterol, LDL cholesterol, triglycerides, glucose, insulin, and fructosamine were measured at baseline and at 4, 8, and 12 wk after the diet change. Isoflavones were measured in the male monkeys at 6 wk after diet change, and lipid particle size was measured in the female monkeys at the 12-wk point. Green monkeys readily ate the Western diet and maintained baseline body weight and morphometric measures, with no adverse effects on fecal quality or clinical measures. Total plasma cholesterol was higher in monkeys fed the Western diet compared with standard chow. Isoflavones were higher in male monkeys fed standard chow compared with the Western diet, but lipid particle size did not differ by diet in female monkeys. Our data indicate that the Western diet led to changes in various biomedical risk factors of green monkeys to become similar to those of humans in the United States.

The Mediating Effect of Gaming Motivation Between Psychiatric Symptoms and Problematic Online Gaming: An Online Survey

PubMed Central

Király, Orsolya; Urbán, Róbert; Griffiths, Mark D; Ágoston, Csilla; Nagygyörgy, Katalin; Kökönyei, Gyöngyi

2015-01-01

Background The rapid expansion of online video gaming as a leisure time activity has led to the appearance of problematic online gaming (POG). According to the literature, POG is associated with different psychiatric symptoms (eg, depression, anxiety) and with specific gaming motives (ie, escape, achievement). Based on studies of alcohol use that suggest a mediator role of drinking motives between distal influences (eg, trauma symptoms) and drinking problems, this study examined the assumption that there is an indirect link between psychiatric distress and POG via the mediation of gaming motives. Furthermore, it was also assumed that there was a moderator effect of gender and game type preference based on the important role gender plays in POG and the structural differences between different game types. Objective This study had two aims. The first aim was to test the mediating role of online gaming motives between psychiatric symptoms and problematic use of online games. The second aim was to test the moderator effect of gender and game type preference in this mediation model. Methods An online survey was conducted on a sample of online gamers (N=3186; age: mean 21.1, SD 5.9 years; male: 2859/3186, 89.74%). The Brief Symptom Inventory (BSI), the Motives for Online Gaming Questionnaire (MOGQ), and the Problematic Online Gaming Questionnaire (POGQ) were administered to assess general psychiatric distress, online gaming motives, and problematic online game use, respectively. Structural regression analyses within structural equation modeling were used to test the proposed mediation models and multigroup analyses were used to test gender and game type differences to determine possible moderating effects. Results The mediation models fitted the data adequately. The Global Severity Index (GSI) of the BSI indicated that the level of psychiatric distress had a significant positive direct effect (standardized effect=.35, P<.001) and a significant indirect (mediating) effect on POG (standardized effect=.194, P<.001) via 2 gaming motives: escape (standardized effect=.139, P<.001) and competition (standardized effect=.046, P<.001). The comparison of the 2 main gamer types showed no significant differences in the model. However, when comparing male and female players it was found that women had (1) slightly higher escape scores (on a 5-point Likert scale: mean 2.28, SD 1.14) than men (mean 1.87, SD 0.97) and (2) a stronger association between the escape motive and problematic online gaming (standardized effect size=.64, P<.001) than men (standardized effect size=.20, P=.001). Conclusions The results suggest that psychiatric distress is both directly and indirectly (via escape and competition motives) negatively associated with POG. Therefore, the exploration of psychiatric symptoms and gaming motives of POG can be helpful in the preparation of prevention and treatment programs. PMID:25855558

The mediating effect of gaming motivation between psychiatric symptoms and problematic online gaming: an online survey.

PubMed

Király, Orsolya; Urbán, Róbert; Griffiths, Mark D; Ágoston, Csilla; Nagygyörgy, Katalin; Kökönyei, Gyöngyi; Demetrovics, Zsolt

2015-04-07

The rapid expansion of online video gaming as a leisure time activity has led to the appearance of problematic online gaming (POG). According to the literature, POG is associated with different psychiatric symptoms (eg, depression, anxiety) and with specific gaming motives (ie, escape, achievement). Based on studies of alcohol use that suggest a mediator role of drinking motives between distal influences (eg, trauma symptoms) and drinking problems, this study examined the assumption that there is an indirect link between psychiatric distress and POG via the mediation of gaming motives. Furthermore, it was also assumed that there was a moderator effect of gender and game type preference based on the important role gender plays in POG and the structural differences between different game types. This study had two aims. The first aim was to test the mediating role of online gaming motives between psychiatric symptoms and problematic use of online games. The second aim was to test the moderator effect of gender and game type preference in this mediation model. An online survey was conducted on a sample of online gamers (N=3186; age: mean 21.1, SD 5.9 years; male: 2859/3186, 89.74%). The Brief Symptom Inventory (BSI), the Motives for Online Gaming Questionnaire (MOGQ), and the Problematic Online Gaming Questionnaire (POGQ) were administered to assess general psychiatric distress, online gaming motives, and problematic online game use, respectively. Structural regression analyses within structural equation modeling were used to test the proposed mediation models and multigroup analyses were used to test gender and game type differences to determine possible moderating effects. The mediation models fitted the data adequately. The Global Severity Index (GSI) of the BSI indicated that the level of psychiatric distress had a significant positive direct effect (standardized effect=.35, P<.001) and a significant indirect (mediating) effect on POG (standardized effect=.194, P<.001) via 2 gaming motives: escape (standardized effect=.139, P<.001) and competition (standardized effect=.046, P<.001). The comparison of the 2 main gamer types showed no significant differences in the model. However, when comparing male and female players it was found that women had (1) slightly higher escape scores (on a 5-point Likert scale: mean 2.28, SD 1.14) than men (mean 1.87, SD 0.97) and (2) a stronger association between the escape motive and problematic online gaming (standardized effect size=.64, P<.001) than men (standardized effect size=.20, P=.001). The results suggest that psychiatric distress is both directly and indirectly (via escape and competition motives) negatively associated with POG. Therefore, the exploration of psychiatric symptoms and gaming motives of POG can be helpful in the preparation of prevention and treatment programs.

Physical Principles of Development of the State Standard of Biological Cell Polarizability

NASA Astrophysics Data System (ADS)

Shuvalov, G. V.; Generalov, K. V.; Generalov, V. M.; Kruchinina, M. V.; Koptev, E. S.; Minin, O. V.; Minin, I. V.

2018-03-01

A new state standard of biological cell polarizability based on micron-size latex particles has been developed. As a standard material, it is suggested to use polystyrene. Values of the polarizability calculated for erythrocytes and values of the polarizability of micron-size spherical latex particles measured with measuring-computing complexes agree within the limits of satisfactory relative error. The Standard allows one the unit of polarizability measurements [m3] to be assigned to cells and erythrocytes for the needs of medicine.

Mental Health First Aid is an effective public health intervention for improving knowledge, attitudes, and behaviour: a meta-analysis.

PubMed

Hadlaczky, Gergö; Hökby, Sebastian; Mkrtchian, Anahit; Carli, Vladimir; Wasserman, Danuta

2014-08-01

Mental Health First Aid (MHFA) is a standardized, psychoeducational programme developed to empower the public to approach, support and refer individuals in distress by improving course participants' knowledge, attitudes and behaviours related to mental ill-health. The present paper aims to synthesize published evaluations of the MHFA programme in a meta-analysis to estimate its effects and potential as a public mental health awareness-increasing strategy. Fifteen relevant papers were identified through a systematic literature search. Standardized effect sizes were calculated for three different outcome measures: change in knowledge, attitudes, and helping behaviours. The results of the meta-analysis for these outcomes yielded a mean effect size of Glass's Δ = 0.56 (95% CI = 0.38 - 0.74; p < 0.001), 0.28 (95% CI = 0.22 - 0.35; p < 0.001) and 0.25 (95% CI = 0.12 - 0.38; p < 0.001), respectively. Results were homogenous, and moderator analyses suggested no systematic bias or differences in results related to study design (with or without control group) or 'publication quality' (journal impact factor). The results demonstrate that MHFA increases participants' knowledge regarding mental health, decreases their negative attitudes, and increases supportive behaviours toward individuals with mental health problems. The MHFA programme appears recommendable for public health action.

Semantic relatedness and similarity of biomedical terms: examining the effects of recency, size, and section of biomedical publications on the performance of word2vec.

PubMed

Zhu, Yongjun; Yan, Erjia; Wang, Fei

2017-07-03

Understanding semantic relatedness and similarity between biomedical terms has a great impact on a variety of applications such as biomedical information retrieval, information extraction, and recommender systems. The objective of this study is to examine word2vec's ability in deriving semantic relatedness and similarity between biomedical terms from large publication data. Specifically, we focus on the effects of recency, size, and section of biomedical publication data on the performance of word2vec. We download abstracts of 18,777,129 articles from PubMed and 766,326 full-text articles from PubMed Central (PMC). The datasets are preprocessed and grouped into subsets by recency, size, and section. Word2vec models are trained on these subtests. Cosine similarities between biomedical terms obtained from the word2vec models are compared against reference standards. Performance of models trained on different subsets are compared to examine recency, size, and section effects. Models trained on recent datasets did not boost the performance. Models trained on larger datasets identified more pairs of biomedical terms than models trained on smaller datasets in relatedness task (from 368 at the 10% level to 494 at the 100% level) and similarity task (from 374 at the 10% level to 491 at the 100% level). The model trained on abstracts produced results that have higher correlations with the reference standards than the one trained on article bodies (i.e., 0.65 vs. 0.62 in the similarity task and 0.66 vs. 0.59 in the relatedness task). However, the latter identified more pairs of biomedical terms than the former (i.e., 344 vs. 498 in the similarity task and 339 vs. 503 in the relatedness task). Increasing the size of dataset does not always enhance the performance. Increasing the size of datasets can result in the identification of more relations of biomedical terms even though it does not guarantee better precision. As summaries of research articles, compared with article bodies, abstracts excel in accuracy but lose in coverage of identifiable relations.

Body composition and military performance--many things to many people.

PubMed

Friedl, Karl E

2012-07-01

Soldiers are expected to maintain the highest possible level of physical readiness because they must be ready to mobilize and perform their duties anywhere in the world at any time. The objective of Army body composition standards is to motivate physical training and good nutrition habits to ensure a high state of readiness. Establishment of enforceable and rational standards to support this objective has been challenging even at extremes of body size. Morbidly obese individuals are clearly not suited to military service, but very large muscular individuals may be superbly qualified for soldier performance demands. For this reason, large individuals are measured for body fat using a waist circumference-based equation (female soldiers are also measured for hip circumference). The main challenge comes in setting appropriate fat standards to support the full range of Army requirements. Military appearance ideals dictate the most stringent body fat standards, whereas health risk thresholds anchor the most liberal standards, and physical performance associations fall on a spectrum between these 2 poles. Standards should not exclude or penalize specialized performance capabilities such as endurance running or power lifting across a spectrum of body sizes and fat. The full integration of women into the military further complicates the issue because of sexually dimorphic characteristics that make gender-appropriate standards essential and where inappropriately stringent standards can compromise both health and performance of this segment of the force. Other associations with body composition such as stress effects on intraabdominal fat distribution patterns and metabolic implications of a fat reserve for survival in extreme environments are also relevant considerations. This is a review of the science that underpins the U.S. Army body composition standards.

Investigating the effect of pixel size of high spatial resolution FTIR imaging for detection of colorectal cancer

NASA Astrophysics Data System (ADS)

Lloyd, G. R.; Nallala, J.; Stone, N.

2016-03-01

FTIR is a well-established technique and there is significant interest in applying this technique to medical diagnostics e.g. to detect cancer. The introduction of focal plane array (FPA) detectors means that FTIR is particularly suited to rapid imaging of biopsy sections as an adjunct to digital pathology. Until recently however each pixel in the image has been limited to a minimum of 5.5 µm which results in a comparatively low magnification image or histology applications and potentially the loss of important diagnostic information. The recent introduction of higher magnification optics gives image pixels that cover approx. 1.1 µm. This reduction in image pixel size gives images of higher magnification and improved spatial detail can be observed. However, the effect of increasing the magnification on spectral quality and the ability to discriminate between disease states is not well studied. In this work we test the discriminatory performance of FTIR imaging using both standard (5.5 µm) and high (1.1 µm) magnification for the detection of colorectal cancer and explore the effect of binning to degrade high resolution images to determine whether similar diagnostic information and performance can be obtained using both magnifications. Results indicate that diagnostic performance using high magnification may be reduced as compared to standard magnification when using existing multivariate approaches. Reduction of the high magnification data to standard magnification via binning can potentially recover some of the lost performance.

The effect of microstructure on the performance of Li-ion porous electrodes

NASA Astrophysics Data System (ADS)

Chung, Ding-Wen

By combining X-ray tomography data and computer-generated porous elec- trodes, the impact of microstructure on the energy and power density of lithium-ion batteries is analyzed. Specifically, for commercial LiMn2O4 electrodes, results indi- cate that a broad particle size distribution of active material delivers up to two times higher energy density than monodisperse-sized particles for low discharge rates, and a monodisperse particle size distribution delivers the highest energy and power density for high discharge rates. The limits of traditionally used microstructural properties such as tortuosity, reactive area density, particle surface roughness, morphological anisotropy were tested against degree of particle size polydispersity, thus enabling the identification of improved porous architectures. The effects of critical battery processing parameters, such as layer compaction and carbon black, were also rationalized in the context of electrode performance. While a monodisperse particle size distribution exhibits the lowest possible tortuosity and three times higher surface area per unit volume with respect to an electrode conformed of a polydisperse particle size distribution, a comparable performance can be achieved by polydisperse particle size distributions with degrees of polydispersity less than 0.2 of particle size standard deviation. The use of non-spherical particles raises the tortuosity by as much as three hundred percent, which considerably lowers the power performance. However, favorably aligned particles can maximize power performance, particularly for high discharge rate applications.

Modified Brown-Forsythe Procedure for Testing Interaction Effects in Split-Plot Designs

ERIC Educational Resources Information Center

Vallejo, Guillermo; Ato, Manuel

2006-01-01

The standard univariate and multivariate methods are conventionally used to analyze continuous data from groups by trials repeated measures designs, in spite of being extremely sensitive to departures from the multisample sphericity assumption when group sizes are unequal. However, in the last 10 years several authors have offered alternative…

Intergenerational Economic Mobility in the United States, 1940 to 2000

ERIC Educational Resources Information Center

Aaronson, Daniel; Mazumder, Bhashkar

2008-01-01

We estimate trends in intergenerational economic mobility by matching men in the Census to synthetic parents in the prior generation. We find that mobility increased from 1950 to 1980 but has declined sharply since 1980. While our estimator places greater weight on location effects than the standard intergenerational coefficient, the size of the…

Porcine Skin Visible Lesion Thresholds for Near-Infrared Lasers Including Modeling at Two Pulse Durations and Spot Sizes

DTIC Science & Technology

2006-08-01

injuries, including corneal, lenticular , and retinal lesions as a function of pulse duration. American National Standards Institute (ANSI) laser...little for skin effects. Unlike most other laser wavelengths, 1315-nm irradiation has been shown to cause damage at corneal, lenticular , and retinal

Do Special Education Interventions Improve Learning of Secondary Content? A Meta-Analysis

ERIC Educational Resources Information Center

Scruggs, Thomas E.; Mastropieri, Margo A.; Berkeley, Sheri; Graetz, Janet E.

2010-01-01

The authors describe findings from a research synthesis on content area instruction for students with disabilities. Seventy studies were identified from a comprehensive literature search, examined, and coded for a number of variables, including weighted standardized mean-difference effect sizes. More than 2,400 students were participants in these…

Adapting dialectical behavior therapy for outpatient adult anorexia nervosa--a pilot study.

PubMed

Chen, Eunice Y; Segal, Kay; Weissman, Jessica; Zeffiro, Thomas A; Gallop, Robert; Linehan, Marsha M; Bohus, Martin; Lynch, Thomas R

2015-01-01

Anorexia Nervosa (AN) is associated with excessive self-control. This iterative case series describes the augmentation of Dialectical Behavior Therapy (DBT) for outpatient adult AN with skills addressing emotional and behavioral overcontrol. An overly controlled style is theorized to develop from the transaction between an individual with heightened threat sensitivity and reduced reward sensitivity, interacting with an environment reinforcing overcontrol and punishing imperfection. Case Series 1 utilized standard DBT, resulting in retention of 5/6 patients and a body mass index (BMI) effect size increase of d = -0.5 from pre- to post-treatment. Case series 2, using standard DBT augmented with skills addressing overcontrol, resulted in retention of 8/9 patients with an effect size increase in BMI at post-treatment that was maintained at 6- and 12-months follow-up (d = -1.12, d = -0.87, and d = -1.12). Findings suggest that skills training targeting rigidity and increasing openness and social connectedness warrant further study of this model and treatment for AN. © 2014 Wiley Periodicals, Inc.

Missing portion sizes in FFQ--alternatives to use of standard portions.

PubMed

Køster-Rasmussen, Rasmus; Siersma, Volkert; Halldorsson, Thorhallur I; de Fine Olivarius, Niels; Henriksen, Jan E; Heitmann, Berit L

2015-08-01

Standard portions or substitution of missing portion sizes with medians may generate bias when quantifying the dietary intake from FFQ. The present study compared four different methods to include portion sizes in FFQ. We evaluated three stochastic methods for imputation of portion sizes based on information about anthropometry, sex, physical activity and age. Energy intakes computed with standard portion sizes, defined as sex-specific medians (median), or with portion sizes estimated with multinomial logistic regression (MLR), 'comparable categories' (Coca) or k-nearest neighbours (KNN) were compared with a reference based on self-reported portion sizes (quantified by a photographic food atlas embedded in the FFQ). The Danish Health Examination Survey 2007-2008. The study included 3728 adults with complete portion size data. Compared with the reference, the root-mean-square errors of the mean daily total energy intake (in kJ) computed with portion sizes estimated by the four methods were (men; women): median (1118; 1061), MLR (1060; 1051), Coca (1230; 1146), KNN (1281; 1181). The equivalent biases (mean error) were (in kJ): median (579; 469), MLR (248; 178), Coca (234; 188), KNN (-340; 218). The methods MLR and Coca provided the best agreement with the reference. The stochastic methods allowed for estimation of meaningful portion sizes by conditioning on information about physiology and they were suitable for multiple imputation. We propose to use MLR or Coca to substitute missing portion size values or when portion sizes needs to be included in FFQ without portion size data.

[Ophthalmologic reading charts : Part 2: Current logarithmically scaled reading charts].

PubMed

Radner, W

2016-12-01

To analyze currently available reading charts regarding print size, logarithmic print size progression, and the background of test-item standardization. For the present study, the following logarithmically scaled reading charts were investigated using a measuring microscope (iNexis VMA 2520; Nikon, Tokyo): Eschenbach, Zeiss, OCULUS, MNREAD (Minnesota Near Reading Test), Colenbrander, and RADNER. Calculations were made according to EN-ISO 8596 and the International Research Council recommendations. Modern reading charts and cards exhibit a logarithmic progression of print sizes. The RADNER reading charts comprise four different cards with standardized test items (sentence optotypes), a well-defined stop criterion, accurate letter sizes, and a high print quality. Numbers and Landolt rings are also given in the booklet. The OCULUS cards have currently been reissued according to recent standards and also exhibit a high print quality. In addition to letters, numbers, Landolt rings, and examples taken from a timetable and the telephone book, sheet music is also offered. The Colenbrander cards use short sentences of 44 characters, including spaces, and exhibit inaccuracy at smaller letter sizes, as do the MNREAD cards. The MNREAD cards use sentences of 60 characters, including spaces, and have a high print quality. Modern reading charts show that international standards can be achieved with test items similar to optotypes, by using recent technology and developing new concepts of test-item standardization. Accurate print sizes, high print quality, and a logarithmic progression should become the minimum requirements for reading charts and reading cards in ophthalmology.

Effects of access to pasture on performance, carcass composition, and meat quality in broilers: a meta-analysis.

PubMed

Sales, J

2014-06-01

Consumer preference for poultry meat from free-range birds is not justified by scientific evidence. Inconsistency in results among studies on the effects of access to pasture on performance, carcass composition, and meat quality has led to a meta-analysis to quantify effects. After identification of studies where response variables were directly compared between birds with and without access to pasture, standardized effect sizes were used to calculate differences. The effect size for growth combined according to a fixed effect model did not present heterogeneity (P = 0.116). However, with feed intake and feed efficiency, variability among studies (heterogeneity with P-values of below 0.10) was influenced by more than sampling error. Carcass yield was the only carcass component that showed heterogeneity (P = 0.008), whereas numerous response variables related to meat quality were not homogenous. The use of subgroup analysis and meta-regression to evaluate the sources of heterogeneity was limited by ill-defined explanatory variables and few values available within response variables. Consequently, between-study variability was accounted for by use of random effects models to combine effect sizes. According to these, few response variables were influenced by pasture access. Fat concentrations in breast (mean effect size = -0.500; 95% CI = -0.825 to -0.175; 11 studies; 14 comparisons), thigh (mean effect size = -0.908; 95% CI = -1.710 to -0.105; 4 studies; 5 comparisons) and drum (mean effect size = -1.223; 95% CI = -2.210 to -0.237; 3 studies; 3 comparisons) muscles were decreased in free-range birds. Access to pasture increased (P < 0.05) or tended to increase (P < 0.10) protein concentrations in the respective commercial cuts. It is concluded that factors other than enhanced meat quality could be responsible for consumer preference for meat from free-range poultry. Poultry Science Association Inc.

Monte Carlo Simulation to Determine Geometry Effects on Quantitative X-ray Microanalysis in Plant Cell Walls Using Gelatin Standards

NASA Astrophysics Data System (ADS)

Tylko, Grzegorz; Dubchak, Sergyi; Banach, Zuzanna; Turnau, Katarzyna

2010-04-01

Monte Carlo simulations of gelatin matrices with known elemental concentrations confirmed the suitability of protein standards to quantify elements of cellulose material in x-ray microanalysis. However, gelatin standards and cellulose plant cell walls differ in structure, what influences x-ray generation and emission in both specimens. The goal of the project was to establish the influence of gelatin structure on x-ray generation and its usefulness to calculate elemental concentrations in plant cell walls of different width. Roots of Medicago truncatula as well as gelatin standards with known elemental composition were prepared according to freeze-drying protocols. The thermanox polymer was chosen to establish background formation for flat and compact organic materials. All analyses were performed with the scanning electron microscope operated at 10 keV and probe current of 350 pA. The Monte Carlo code Casino was applied to calculate the intensities of the generated and the emitted x-rays from biological matrix of different width. No topography effects of gelatin structure were visible when the raster mode of electron impact was applied to the specimen. Monte Carlo simulations of gelatin of different width revealed that a significant decrease of the generated x-ray intensity appears at the width of the specimen around 3.5 μm. However, an increase of emission of low energy x-ray intensities (Na, Mg) was noted at 3.5 μm size with constant emission of higher energy x-rays (Cl, K) down to 2.5 μm width. It determines the minimal size of plant specimen useful for comparison to bulk gelatin standard when quantitative analysis is performed for biologically important elements.

Effect of standard cuff on blood pressure readings in patients with obese arms. How frequent are arms of a 'large circumference'?

PubMed

Fonseca-Reyes, Salvador; de Alba-García, Javier García; Parra-Carrillo, José Z; Paczka-Zapata, José Antonio

2003-06-01

To measure the effect on blood pressure readings when a standard cuff is used on patients with arms of a large circumference, and to determine the frequency of arms of a large circumference. Blood pressures were taken in 120 subjects with an arm circumference greater than 33 cm. Also, the arm circumference was determined in 244 patients from a family health unit, and in 216 patients from a hypertension clinic. A mercury sphygmomanometer and two different cuff sizes were used in a random sequence; therefore, 60 patients' blood pressure were first measured with a large cuff, followed by a standard cuff; the opposite sequence was then applied for another 60 patients. With the obtained values and using a regression analysis, the difference in blood pressure overestimation was calculated. Arm circumference measurement percentages were used to determine the frequency of arms of a large circumference. Both systolic and diastolic blood pressures were significantly greater when the standard cuff was used. For every 5 cm increase in arm circumference, starting at 35 cm, a 2-5 mmHg increase in systolic blood pressure, and a 1-3 mmHg increase in diastolic blood pressure was observed. The prevalence of arms with a large circumference in the family medicine unit and hypertension clinic was 42% and 41.8%, respectively. There is an overestimation of blood pressure when a standard cuff is used in obese subjects. The high prevalence of these individuals in our environment, both in the hypertensive and normotensive population, makes it necessary to have on hand different sizes of cuffs for taking blood pressure in order to avoid incorrect decisions.

Magnitude of cognitive dysfunction in adults with type 2 diabetes: a meta-analysis of six cognitive domains and the most frequently reported neuropsychological tests within domains.

PubMed

Palta, Priya; Schneider, Andrea L C; Biessels, Geert Jan; Touradji, Pegah; Hill-Briggs, Felicia

2014-03-01

The objectives were to conduct a meta-analysis in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) standards to determine effect sizes (Cohen's d) for cognitive dysfunction in adults with type 2 diabetes, relative to nondiabetic controls, and to obtain effect sizes for the most commonly reported neuropsychological tests within domains. Twenty-four studies, totaling 26,137 patients (n = 3351 with diabetes), met study inclusion criteria. Small to moderate effect sizes were obtained for five of six domains: motor function (3 studies, n = 2374; d = -0.36), executive function (12 studies, n = 1784; d = -0.33), processing speed (16 studies, n = 3076; d = -0.33), verbal memory (15 studies, n = 4,608; d = -0.28), and visual memory (6 studies, n = 1754; d = -0.26). Effect size was smallest for attention/concentration (14 studies, n = 23,143; d = -0.19). The following tests demonstrated the most notable performance decrements in diabetes samples: Grooved Pegboard (dominant hand) (d = -0.60), Rey Auditory Verbal Learning Test (immediate) (d = -0.40), Trails B (d = -0.39), Rey-Osterreith Complex Figure (delayed) (d = -0.38), Trails A (d = -0.34), and Stroop Part I (d = -0.28). This study provides effect sizes to power future epidemiological and clinical diabetes research studies examining cognitive function and to help inform the selection of neuropsychological tests.

Effect of sample area and sieve size on benthic macrofaunal community condition assessments in California enclosed bays and estuaries.

PubMed

Hammerstrom, Kamille K; Ranasinghe, J Ananda; Weisberg, Stephen B; Oliver, John S; Fairey, W Russell; Slattery, Peter N; Oakden, James M

2012-10-01

Benthic macrofauna are used extensively for environmental assessment, but the area sampled and sieve sizes used to capture animals often differ among studies. Here, we sampled 80 sites using 3 different sized sampling areas (0.1, 0.05, 0.0071 m(2)) and sieved those sediments through each of 2 screen sizes (0.5, 1 mm) to evaluate their effect on number of individuals, number of species, dominance, nonmetric multidimensional scaling (MDS) ordination, and benthic community condition indices that are used to assess sediment quality in California. Sample area had little effect on abundance but substantially affected numbers of species, which are not easily scaled to a standard area. Sieve size had a substantial effect on both measures, with the 1-mm screen capturing only 74% of the species and 68% of the individuals collected in the 0.5-mm screen. These differences, though, had little effect on the ability to differentiate samples along gradients in ordination space. Benthic indices generally ranked sample condition in the same order regardless of gear, although the absolute scoring of condition was affected by gear type. The largest differences in condition assessment were observed for the 0.0071-m(2) gear. Benthic indices based on numbers of species were more affected than those based on relative abundance, primarily because we were unable to scale species number to a common area as we did for abundance. Copyright © 2010 SETAC.

Sample size and power considerations in network meta-analysis

PubMed Central

2012-01-01

Background Network meta-analysis is becoming increasingly popular for establishing comparative effectiveness among multiple interventions for the same disease. Network meta-analysis inherits all methodological challenges of standard pairwise meta-analysis, but with increased complexity due to the multitude of intervention comparisons. One issue that is now widely recognized in pairwise meta-analysis is the issue of sample size and statistical power. This issue, however, has so far only received little attention in network meta-analysis. To date, no approaches have been proposed for evaluating the adequacy of the sample size, and thus power, in a treatment network. Findings In this article, we develop easy-to-use flexible methods for estimating the ‘effective sample size’ in indirect comparison meta-analysis and network meta-analysis. The effective sample size for a particular treatment comparison can be interpreted as the number of patients in a pairwise meta-analysis that would provide the same degree and strength of evidence as that which is provided in the indirect comparison or network meta-analysis. We further develop methods for retrospectively estimating the statistical power for each comparison in a network meta-analysis. We illustrate the performance of the proposed methods for estimating effective sample size and statistical power using data from a network meta-analysis on interventions for smoking cessation including over 100 trials. Conclusion The proposed methods are easy to use and will be of high value to regulatory agencies and decision makers who must assess the strength of the evidence supporting comparative effectiveness estimates. PMID:22992327

Freeze-drying of nanosuspensions, 1: freezing rate versus formulation design as critical factors to preserve the original particle size distribution.

PubMed

Beirowski, Jakob; Inghelbrecht, Sabine; Arien, Albertina; Gieseler, Henning

2011-05-01

It has been recently reported in the literature that using a fast freezing rate during freeze-drying of drug nanosuspensions is beneficial to preserve the original particle size distribution. All freezing rates studied were obtained by utilizing a custom-made apparatus and were then indirectly related to conventional vial freeze-drying. However, a standard freeze-dryer is only capable of achieving moderate freezing rates in the shelf fluid circulation system. Therefore, it was the purpose of the present study to evaluate the possibility to establish a typical freezing protocol applicable to a standard freeze-drying unit in combination with an adequate choice of cryoprotective excipients and steric stabilizers to preserve the original particle size distribution. Six different drug nanosuspensions containing itraconazole as a drug model were studied using freeze-thaw experiments and a full factorial design to reveal major factors for the stabilization of drug nanosuspensions and the corresponding interactions. In contrast to previous reports, the freezing regime showed no significant influence on preserving the original particle size distribution, suggesting that the concentrations of both the steric stabilizer and the cryoprotective agent are optimized. Moreover, it could be pinpointed that the combined effect of steric stabilizer and cryoprotectant clearly contribute to nanoparticle stability. Copyright © 2010 Wiley-Liss, Inc.

Size-dependent electrocatalytic activity of gold nanoparticles on HOPG and highly boron-doped diamond surfaces.

PubMed

Brülle, Tine; Ju, Wenbo; Niedermayr, Philipp; Denisenko, Andrej; Paschos, Odysseas; Schneider, Oliver; Stimming, Ulrich

2011-12-06

Gold nanoparticles were prepared by electrochemical deposition on highly oriented pyrolytic graphite (HOPG) and boron-doped, epitaxial 100-oriented diamond layers. Using a potentiostatic double pulse technique, the average particle size was varied in the range from 5 nm to 30 nm in the case of HOPG as a support and between < 1 nm and 15 nm on diamond surfaces, while keeping the particle density constant. The distribution of particle sizes was very narrow, with standard deviations of around 20% on HOPG and around 30% on diamond. The electrocatalytic activity towards hydrogen evolution and oxygen reduction of these carbon supported gold nanoparticles in dependence of the particle sizes was investigated using cyclic voltammetry. For oxygen reduction the current density normalized to the gold surface (specific current density) increased for decreasing particle size. In contrast, the specific current density of hydrogen evolution showed no dependence on particle size. For both reactions, no effect of the different carbon supports on electrocatalytic activity was observed.

13 CFR 121.1009 - What are the procedures for making the size determination?

Code of Federal Regulations, 2012 CFR

2012-01-01

... the size determination? 121.1009 Section 121.1009 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Procedures for Size.... The concern whose size is under consideration has the burden of establishing its small business size...

13 CFR 121.1009 - What are the procedures for making the size determination?

Code of Federal Regulations, 2013 CFR

2013-01-01

... the size determination? 121.1009 Section 121.1009 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Procedures for Size.... The concern whose size is under consideration has the burden of establishing its small business size...

13 CFR 121.1009 - What are the procedures for making the size determination?

Code of Federal Regulations, 2014 CFR

2014-01-01

... the size determination? 121.1009 Section 121.1009 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Procedures for Size.... The concern whose size is under consideration has the burden of establishing its small business size...

Similar range of motion and function after resurfacing large–head or standard total hip arthroplasty

PubMed Central

2013-01-01

Background and purpose Large–size hip articulations may improve range of motion (ROM) and function compared to a 28–mm THA, and the low risk of dislocation allows the patients more activity postoperatively. On the other hand, the greater extent of surgery for resurfacing hip arthroplasty (RHA) could impair rehabilitation. We investigated the effect of head size and surgical procedure on postoperative rehabilitation in a randomized clinical trial (RCT). Methods We followed randomized groups of RHAs, large–head THAs and standard THAs at 2 months, 6 months, 1 and 2 years postoperatively, recording clinical rehabilitation parameters. Results Large articulations increased the mean total range of motion by 13° during the first 6 postoperative months. The increase was not statistically significant and was transient. The 2–year total ROM (SD) for RHA, standard THA, and large–head THA was 221° (35), 232° (36), and 225° (30) respectively, but the differences were not statistically significant. The 3 groups were similar regarding Harris hip score, UCLA activity score, step rate, and sick leave. Interpretation Head size had no influence on range of motion. The lack of restriction allowed for large articulations did not improve the clinical and patient–perceived outcomes. The more extensive surgical procedure of RHA did not impair the rehabilitation. This project is registered at ClinicalTrials.gov under # NCT01113762. PMID:23530872

Cobble cam: Grain-size measurements of sand to boulder from digital photographs and autocorrelation analyses

USGS Publications Warehouse

Warrick, J.A.; Rubin, D.M.; Ruggiero, P.; Harney, J.N.; Draut, A.E.; Buscombe, D.

2009-01-01

A new application of the autocorrelation grain size analysis technique for mixed to coarse sediment settings has been investigated. Photographs of sand- to boulder-sized sediment along the Elwha River delta beach were taken from approximately 1??2 m above the ground surface, and detailed grain size measurements were made from 32 of these sites for calibration and validation. Digital photographs were found to provide accurate estimates of the long and intermediate axes of the surface sediment (r2 > 0??98), but poor estimates of the short axes (r2 = 0??68), suggesting that these short axes were naturally oriented in the vertical dimension. The autocorrelation method was successfully applied resulting in total irreducible error of 14% over a range of mean grain sizes of 1 to 200 mm. Compared with reported edge and object-detection results, it is noted that the autocorrelation method presented here has lower error and can be applied to a much broader range of mean grain sizes without altering the physical set-up of the camera (~200-fold versus ~6-fold). The approach is considerably less sensitive to lighting conditions than object-detection methods, although autocorrelation estimates do improve when measures are taken to shade sediments from direct sunlight. The effects of wet and dry conditions are also evaluated and discussed. The technique provides an estimate of grain size sorting from the easily calculated autocorrelation standard error, which is correlated with the graphical standard deviation at an r2 of 0??69. The technique is transferable to other sites when calibrated with linear corrections based on photo-based measurements, as shown by excellent grain-size analysis results (r2 = 0??97, irreducible error = 16%) from samples from the mixed grain size beaches of Kachemak Bay, Alaska. Thus, a method has been developed to measure mean grain size and sorting properties of coarse sediments. ?? 2009 John Wiley & Sons, Ltd.

Effect of High-Frequency Transcranial Magnetic Stimulation on Craving in Substance Use Disorder: A Meta-Analysis.

PubMed

Maiti, Rituparna; Mishra, Biswa Ranjan; Hota, Debasish

2017-01-01

Repetitive transcranial magnetic stimulation (rTMS), a noninvasive, neuromodulatory tool, has been used to reduce craving in different substance use disorders. There are some studies that have reported conflicting and inconclusive results; therefore, this meta-analysis was conducted to evaluate the effect of high-frequency rTMS on craving in substance use disorder and to investigate the reasons behind the inconsistency across the studies. The authors searched clinical trials from MEDLINE, Cochrane databases, and International Clinical Trials Registry Platform. The PRISMA guidelines, as well as recommended meta-analysis practices, were followed in the selection process, analysis, and reporting of the findings. The effect estimate used was the standardized mean difference (Hedge's g), and heterogeneity across the considered studies was explored using subgroup analyses. The quality assessment was done using the Cochrane risk of bias tool, and sensitivity analysis was performed to check the influences on effect size by statistical models. After screening and assessment of eligibility, finally 10 studies were included for meta-analysis, which includes six studies on alcohol and four studies on nicotine use disorder. The random-model analysis revealed a pooled effect size of 0.75 (95% CI=0.29 to 1.21, p=0.001), whereas the fixed-model analysis showed a large effect size of 0.87 (95% CI=0.63 to 1.12, p<0.00001). Subgroup analysis for alcohol use disorder showed an effect size of -0.06 (95% CI=-0.89 to 0.77, p=0.88). In the case of nicotine use disorder, random-model analysis revealed an effect size of 1.00 (95% CI=0.48 to 1.55, p=0.0001), whereas fixed-model analysis also showed a large effect size of 0.96 (95% CI=0.71 to 1.22). The present meta-analysis identified a beneficial effect of high-frequency rTMS on craving associated with nicotine use disorder but not alcohol use disorder.

Optimizing Mississippi aggregates for concrete bridge decks.

DOT National Transportation Integrated Search

2012-12-01

AASHTO M 43 Standard Specification for Sizes of Aggregate for Road and Bridge Construction : addresses particle size distribution of material included in various maximum nominal size aggregates. This : particle size distribution requires additi...

The distance between Mars and Venus: measuring global sex differences in personality.

PubMed

Del Giudice, Marco; Booth, Tom; Irwing, Paul

2012-01-01

Sex differences in personality are believed to be comparatively small. However, research in this area has suffered from significant methodological limitations. We advance a set of guidelines for overcoming those limitations: (a) measure personality with a higher resolution than that afforded by the Big Five; (b) estimate sex differences on latent factors; and (c) assess global sex differences with multivariate effect sizes. We then apply these guidelines to a large, representative adult sample, and obtain what is presently the best estimate of global sex differences in personality. Personality measures were obtained from a large US sample (N = 10,261) with the 16PF Questionnaire. Multigroup latent variable modeling was used to estimate sex differences on individual personality dimensions, which were then aggregated to yield a multivariate effect size (Mahalanobis D). We found a global effect size D = 2.71, corresponding to an overlap of only 10% between the male and female distributions. Even excluding the factor showing the largest univariate ES, the global effect size was D = 1.71 (24% overlap). These are extremely large differences by psychological standards. The idea that there are only minor differences between the personality profiles of males and females should be rejected as based on inadequate methodology.

Confidence intervals for single-case effect size measures based on randomization test inversion.

PubMed

Michiels, Bart; Heyvaert, Mieke; Meulders, Ann; Onghena, Patrick

2017-02-01

In the current paper, we present a method to construct nonparametric confidence intervals (CIs) for single-case effect size measures in the context of various single-case designs. We use the relationship between a two-sided statistical hypothesis test at significance level α and a 100 (1 - α) % two-sided CI to construct CIs for any effect size measure θ that contain all point null hypothesis θ values that cannot be rejected by the hypothesis test at significance level α. This method of hypothesis test inversion (HTI) can be employed using a randomization test as the statistical hypothesis test in order to construct a nonparametric CI for θ. We will refer to this procedure as randomization test inversion (RTI). We illustrate RTI in a situation in which θ is the unstandardized and the standardized difference in means between two treatments in a completely randomized single-case design. Additionally, we demonstrate how RTI can be extended to other types of single-case designs. Finally, we discuss a few challenges for RTI as well as possibilities when using the method with other effect size measures, such as rank-based nonoverlap indices. Supplementary to this paper, we provide easy-to-use R code, which allows the user to construct nonparametric CIs according to the proposed method.

The Distance Between Mars and Venus: Measuring Global Sex Differences in Personality

PubMed Central

Del Giudice, Marco; Booth, Tom; Irwing, Paul

2012-01-01

Background Sex differences in personality are believed to be comparatively small. However, research in this area has suffered from significant methodological limitations. We advance a set of guidelines for overcoming those limitations: (a) measure personality with a higher resolution than that afforded by the Big Five; (b) estimate sex differences on latent factors; and (c) assess global sex differences with multivariate effect sizes. We then apply these guidelines to a large, representative adult sample, and obtain what is presently the best estimate of global sex differences in personality. Methodology/Principal Findings Personality measures were obtained from a large US sample (N = 10,261) with the 16PF Questionnaire. Multigroup latent variable modeling was used to estimate sex differences on individual personality dimensions, which were then aggregated to yield a multivariate effect size (Mahalanobis D). We found a global effect size D = 2.71, corresponding to an overlap of only 10% between the male and female distributions. Even excluding the factor showing the largest univariate ES, the global effect size was D = 1.71 (24% overlap). These are extremely large differences by psychological standards. Significance The idea that there are only minor differences between the personality profiles of males and females should be rejected as based on inadequate methodology. PMID:22238596

Size and chemical characterization of airborne particulate matter in Spokane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haller, L.; Claiborn, C.; Westberg, H.

1996-12-31

Recent health effects studies suggest that the present air quality standard for aerosols, which is based upon respirable particles, does not adequately protect public health; Thus the standard is currently under review. In July, 1994, a comprehensive study was initiated in Spokane to study the relationship between various size fractions and chemical components of atmospheric aerosol and health effects. This study is one of the most comprehensive particulate matter studies conducted to date, and is one of a limited number of studies that have been conducted in the and west, where presumably a significant portion of the aerosol will bemore » derived from geological materials. Continuous fine and coarse particulate matter measurements are made at two location (one is in industrial area, and the other in residential area). At the residential site, particulate matter smaller than 1.0 {mu}m, and ultra fine particles are also continuously monitored, and analyzed for a variety of chemical species including elemental components, ionic species, soluble iron, elemental and organic carbon and acidity. Preliminary results indicate that the windblown dust enhances both the fine and coarse fractions of particulate matter in Spokane. Seasonal trends in chemical composition and size characterization will be examined. The relationships between the 24-hour average values and peak hourly values, as well as differences between weekday and weekend levels, will also be discussed.« less

Hispanic Americans Baseline Alcohol Survey (HABLAS): effects of container size adjustments on estimates of alcohol consumption across Hispanic national groups.

PubMed

Caetano, Raul; Mills, Britain A; Harris, T Robert

2012-01-01

This study was conducted to examine discrepancies in alcohol consumption estimates between a self-reported standard quantity-frequency measure and an adjusted version based on respondents' typically used container size. Using a multistage cluster sample design, 5,224 Hispanic individuals 18 years of age and older were selected from the household population in five metropolitan areas of the United States: Miami, New York, Philadelphia, Houston, and Los Angeles. The survey-weighted response rate was 76%. Personal interviews lasting an average of 1 hour were conducted in respondents' homes in either English or Spanish. The overall effect of container adjustment was to increase estimates of ethanol consumption by 68% for women (range across Hispanic groups: 17%-99%) and 30% for men (range: 14%-42%). With the exception of female Cuban American, Mexican American, and South/Central American beer drinkers and male Cuban American wine drinkers, all percentage differences between unadjusted and container-adjusted estimates were positive. Second, container adjustments produced the largest change for volume of distilled spirits, followed by wine and beer. Container size adjustments generally produced larger percentage increases in consumption estimates for the higher volume drinkers, especially the upper tertile of female drinkers. Self-reported alcohol consumption based on standard drinks underreports consumption when compared with reports based on the amount of alcohol poured into commonly used containers.

Meta-analysis of organizational skills interventions for children and adolescents with Attention-Deficit/Hyperactivity Disorder.

PubMed

Bikic, Aida; Reichow, Brian; McCauley, Spencer A; Ibrahim, Karim; Sukhodolsky, Denis G

2017-03-01

In addition to problems with attention and hyperactivity, children with ADHD present with poor organizational skills required for managing time and materials in academic projects. Organizational skills training (OST) has been increasingly used to address these deficits. We conducted a systematic review and meta-analysis of OST in children with ADHD. The objective of this study was to systematically review the evidence of the effects of OST for children with ADHD for organizational skills, attention, and academic performance. We searched 3 electronic databases to locate randomized controlled trials published in English in peer-reviewed journals comparing OST with parent education, treatment-as-usual, or waitlist control conditions. Standardized mean difference effect sizes from the studies were statistically combined using a random-effects meta-analyses across six outcomes: teacher- and parent-rated organizational skills, teacher- and parent-rated inattention, teacher-rated academic performance, and Grade Point Average (GPA). Risk of bias was assessed for randomization, allocation concealment, blinding of participants and treatment personnel, blinding of outcome assessors, incomplete outcome data, and selective outcome reporting. Twelve studies involving 1054 children (576 treatment, 478 control) were included in the meta-analyses. Weighted mean effect sizes for teacher- and parent-rated outcome measures of organizational skills were g=0.54 (95% CI 0.17 to 0.91) and g=0.83 (95% CI 0.32 to 1.34), respectively. Weighted mean effect sizes of teacher- and parent-rated symptoms of inattention were g=0.26 (95% CI 0.01 to 0.52) and g=0.56 (95% CI 0.38 to 0.74), respectively. Weighted standardized mean effect size for teacher-rated academic performance and GPA were g=0.33 (95% CI 0.14 to 0.51) and g=0.29 (95% CI 0.07 to 0.51), respectively. OST leads to moderate improvements in organizational skills of children with ADHD as rated by teachers and large improvements as rated by parents. More modest improvements were observed on the ratings of symptoms of inattention and academic performance. PROSPERO (CRD42015019261). Copyright © 2016 Elsevier Ltd. All rights reserved.

Using assessment to individualize early mathematics instruction.

PubMed

Connor, Carol McDonald; Mazzocco, Michèle M M; Kurz, Terri; Crowe, Elizabeth C; Tighe, Elizabeth L; Wood, Taffeta S; Morrison, Frederick J

2018-02-01

Accumulating evidence suggests that assessment-informed personalized instruction, tailored to students' individual skills and abilities, is more effective than more one-size-fits-all approaches. In this study, we evaluate the efficacy of Individualizing Student Instruction in Mathematics (ISI-Math) compared to Reading (ISI-Reading) where classrooms were randomly assigned to ISI-Math or ISI-Reading. The literature on child characteristics X instruction or skill X treatment interaction effects point to the complexities of tailoring instruction for individual students who present with constellations of skills. Second graders received mathematics instruction in small flexible learning groups based on their assessed learning needs. Results of the study (n=32 teachers, 370 students) revealed significant treatment effects on standardized mathematics assessments. With effect sizes (d) of 0.41-0.60, we show that we can significantly improve 2nd graders' mathematics achievement, including for children living in poverty, by using assessment data to individualize the mathematics instruction they receive. The instructional regime, ISI-Math, was implemented by regular classroom teachers and it led to about a 4-month achievement advantage on standardized mathematics tests when compared to students in control classrooms. These results were realized within one school year. Moreover, treatment effects were the same regardless of school-level poverty and students' gender, initial mathematics or vocabulary scores. Copyright © 2017 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

A randomized, controlled clinical trial of standard, group and brief cognitive-behavioral therapy for panic disorder with agoraphobia: a two-year follow-up.

PubMed

Marchand, André; Roberge, Pasquale; Primiano, Sandra; Germain, Vanessa

2009-12-01

A randomized controlled clinical trial with a wait-list control group was conducted to examine the effectiveness of three modalities (brief, group, and standard) of cognitive-behavioral treatment (CBT) for panic disorder with agoraphobia. A total of 100 participants meeting DSM-IV criteria were randomly assigned to each treatment condition: a 14-session standard CBT (n=33), a 14-session group CBT (n=35) and a 7-session brief CBT (n=32). Participants received a self-study manual and were assigned weekly readings and exercises. The results indicate that regardless of the treatment condition, CBT for moderate to severe PDA is beneficial in medium and long term. To this effect, all three-treatment conditions significantly reduced the intensity of symptoms, increased participants' quality of life, offered high effect sizes, superior maintenance of gains over time, and lower rates of relapse, compared to the wait-list control.

Sample sizes needed for specified margins of relative error in the estimates of the repeatability and reproducibility standard deviations.

PubMed

McClure, Foster D; Lee, Jung K

2005-01-01

Sample size formulas are developed to estimate the repeatability and reproducibility standard deviations (Sr and S(R)) such that the actual error in (Sr and S(R)) relative to their respective true values, sigmar and sigmaR, are at predefined levels. The statistical consequences associated with AOAC INTERNATIONAL required sample size to validate an analytical method are discussed. In addition, formulas to estimate the uncertainties of (Sr and S(R)) were derived and are provided as supporting documentation. Formula for the Number of Replicates Required for a Specified Margin of Relative Error in the Estimate of the Repeatability Standard Deviation.

The Effect of Viewing Eccentricity on Enumeration

PubMed Central

Palomares, Melanie; Smith, Paul R.; Pitts, Carole Holley; Carter, Breana M.

2011-01-01

Visual acuity and contrast sensitivity progressively diminish with increasing viewing eccentricity. Here we evaluated how visual enumeration is affected by visual eccentricity, and whether subitizing capacity, the accurate enumeration of a small number (∼3) of items, decreases with more eccentric viewing. Participants enumerated gratings whose (1) stimulus size was constant across eccentricity, and (2) whose stimulus size scaled by a cortical magnification factor across eccentricity. While we found that enumeration accuracy and precision decreased with increasing eccentricity, cortical magnification scaling of size neutralized the deleterious effects of increasing eccentricity. We found that size scaling did not affect subitizing capacities, which were nearly constant across all eccentricities. We also found that size scaling modulated the variation coefficients, a normalized metric of enumeration precision, defined as the standard deviation divided by the mean response. Our results show that the inaccuracy and imprecision associated with increasing viewing eccentricity is due to limitations in spatial resolution. Moreover, our results also support the notion that the precise number system is restricted to small numerosities (represented by the subitizing limit), while the approximate number system extends across both small and large numerosities (indexed by variation coefficients) at large eccentricities. PMID:21695212

The effect of viewing eccentricity on enumeration.

PubMed

Palomares, Melanie; Smith, Paul R; Pitts, Carole Holley; Carter, Breana M

2011-01-01

Visual acuity and contrast sensitivity progressively diminish with increasing viewing eccentricity. Here we evaluated how visual enumeration is affected by visual eccentricity, and whether subitizing capacity, the accurate enumeration of a small number (∼3) of items, decreases with more eccentric viewing. Participants enumerated gratings whose (1) stimulus size was constant across eccentricity, and (2) whose stimulus size scaled by a cortical magnification factor across eccentricity. While we found that enumeration accuracy and precision decreased with increasing eccentricity, cortical magnification scaling of size neutralized the deleterious effects of increasing eccentricity. We found that size scaling did not affect subitizing capacities, which were nearly constant across all eccentricities. We also found that size scaling modulated the variation coefficients, a normalized metric of enumeration precision, defined as the standard deviation divided by the mean response. Our results show that the inaccuracy and imprecision associated with increasing viewing eccentricity is due to limitations in spatial resolution. Moreover, our results also support the notion that the precise number system is restricted to small numerosities (represented by the subitizing limit), while the approximate number system extends across both small and large numerosities (indexed by variation coefficients) at large eccentricities.

The effect of particle size on the dehydration/rehydration behaviour of lactose.

PubMed

Crisp, J L; Dann, S E; Edgar, M; Blatchford, C G

2010-05-31

Ethanolic suspensions of spray dried and micronized alpha lactose monohydrate (L(alpha)xH(2)O) with average particle size between 3 and 200 microm, have been prepared and their dehydration behaviour was investigated by (13)C CP-MASNMR spectroscopy. Sub-micron lactose suspension prepared by a novel high pressure homogenisation method has been compared with the standard ethanolic suspensions of (L(alpha).H(2)O prepared by reflux or static room temperature methods. In all cases, suspensions were shown to contain the stable anhydrous form of lactose ((L(alpha)(S)). Several approaches were employed to remove ethanol from these suspensions and the resulting dry lactose powders were then analysed by FT-IR, PXRD and SEM to evaluate the effect of drying procedure on type and distribution of lactose polymorphs and particle size. For samples with mean particle size greater than 1 microm, the stable anhydrous polymorphic form of lactose was retained on removal of the ethanol, although differences in the morphology and particle size of the crystals were apparent depending on method of suspension formation. Sub-micron (L(alpha)(S), while stable in dry conditions, has been shown to be less stable to atmospheric water vapour than (L(alpha)(S) with particle size between 3 and 200 microm. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Spray Drift Reduction Evaluations of Spray Nozzles Using a Standardized Testing Protocol

DTIC Science & Technology

2010-07-01

Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments,” Annual Book of ASTM Standards, Vol. 14-02, ASTM...Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Non- imaging Light-Scattering Instruments 22. AGDISP Model

77 FR 72691 - Small Business Size Standards: Administrative and Support, Waste Management and Remediation Services

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-06

...: Administrative and Support, Waste Management and Remediation Services AGENCY: U.S. Small Business Administration..., Administrative and Support, Waste Management and Remediation Services. As part of its ongoing comprehensive... size standard for Environmental Remediation Services, an ``exception'' under NAICS 562910, Remediation...

The Effect of Diet or Exercise on Visceral Adipose Tissue in Overweight Youth.

PubMed

Vissers, Dirk; Hens, Wendy; Hansen, Dominique; Taeymans, Jan

2016-07-01

Excess visceral adipose tissue (VAT) in children with obesity is associated with the development of cardiovascular and metabolic disease. This meta-analysis investigated if lifestyle interventions can reduce VAT in overweight and obese youth. Pubmed, Cochrane, and PEDro were searched for clinical trials that objectively assessed VAT and included study arms with supervised diet, exercise, or a combination of both. If there was a no-therapy control group, the data of the control group and the intervention groups were used to meta-analyze the data. In all other cases, the preintervention and the postintervention data were used to meta-analyze. Effect sizes were calculated as standardized mean differences or changes of VAT and expressed as Hedges' g. The overall weighted mean effect size on VAT of all included interventions was -0.69 (95% confidence interval [CI] = -0.90 to -0.48) (P < 0.001). Subgroup analysis showed that the overall weighted mean effect size of diet-only interventions on VAT was 0.23 (95% CI = -0.22 to 0.68) (P = 0.311). Interventions that combined diet and exercise showed a pooled effect size on VAT of -0.55 (95% CI = -0.75 to -0.39) (P < 0.001). The pooled effect size of exercise-only interventions on VAT was -0.85 (95% CI = -1.20 to -0.57) (P < 0.001). Supervised exercise-only or combined diet and exercise interventions can reduce VAT in overweight and obese children and adolescents. The strongest effect was found in exercise-only groups. However, high-quality randomized controlled trials describing the effect of supervised dietary interventions on VAT in children are lacking.

Light-duty vehicle fuel economy improvements, 1979--1998: A consumer purchase model of corporate average fuel economy, fuel price, and income effects

NASA Astrophysics Data System (ADS)

Chien, David Michael

2000-10-01

The Energy Policy and Conservation Act of 1975, which created fuel economy standards for automobiles and light trucks, was passed by Congress in response to the rapid rise in world oil prices as a result of the 1973 oil crisis. The standards were first implemented in 1978 for automobiles and 1979 for light trucks, and began with initial standards of 18 MPG for automobiles and 17.2 MPG for light trucks. The current fuel economy standards for 1998 have been held constant at 27.5 MPG for automobiles and 20.5 MPG for light trucks since 1990--1991. While actual new automobile fuel economy has almost doubled from 14 MPG in 1974 to 27.2 MPG in 1994, it is reasonable to ask if the CAFE standards are still needed. Each year Congress attempts to pass another increase in the Corporate Average Fuel Economy (CAFE) standard and fails. Many have called for the abolition of CAFE standards citing the ineffectiveness of the standards in the past. In order to determine whether CAFE standards should be increased, held constant, or repealed, an evaluation of the effectiveness of the CAFE standards to date must be established. Because fuel prices were rising concurrently with the CAFE standards, many authors have attributed the rapid rise in new car fuel economy solely to fuel prices. The purpose of this dissertation is to re-examine the determinants of new car fuel economy via three effects: CAFE regulations, fuel price, and income effects. By measuring the marginal effects of the three fuel economy determinants upon consumers and manufacturers choices, for fuel economy, an estimate was made of the influence of each upon new fuel economy. The conclusions of this dissertation present some clear signals to policymakers: CAFE standards have been very effective in increasing fuel economy from 1979 to 1998. Furthermore, they have been the main cause of fuel economy improvement, with income being a much smaller component. Furthermore, this dissertation has suggested that fuel prices have very limited effects upon fuel economy, ranging from no primary effect on certain size classes to a minimal secondary effect through higher performance or horsepower demanded.

7 CFR 51.1216 - Size requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Standards for Grades of Peaches Size § 51.1216 Size requirements. (a) The numerical count or a count-size... closed container shall be indicated on the container. (b) When the numerical count is not shown the...

7 CFR 51.1216 - Size requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Standards for Grades of Peaches Size § 51.1216 Size requirements. (a) The numerical count or a count-size... closed container shall be indicated on the container. (b) When the numerical count is not shown the...

7 CFR 51.1216 - Size requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Standards for Grades of Peaches Size § 51.1216 Size requirements. (a) The numerical count or a count-size... closed container shall be indicated on the container. (b) When the numerical count is not shown the...

Particle mobility size spectrometers: harmonization of technical standards and data structure to facilitate high quality long-term observations of atmospheric particle number size distributions

NASA Astrophysics Data System (ADS)

Wiedensohler, A.; Birmili, W.; Nowak, A.; Sonntag, A.; Weinhold, K.; Merkel, M.; Wehner, B.; Tuch, T.; Pfeifer, S.; Fiebig, M.; Fjäraa, A. M.; Asmi, E.; Sellegri, K.; Depuy, R.; Venzac, H.; Villani, P.; Laj, P.; Aalto, P.; Ogren, J. A.; Swietlicki, E.; Roldin, P.; Williams, P.; Quincey, P.; Hüglin, C.; Fierz-Schmidhauser, R.; Gysel, M.; Weingartner, E.; Riccobono, F.; Santos, S.; Grüning, C.; Faloon, K.; Beddows, D.; Harrison, R. M.; Monahan, C.; Jennings, S. G.; O'Dowd, C. D.; Marinoni, A.; Horn, H.-G.; Keck, L.; Jiang, J.; Scheckman, J.; McMurry, P. H.; Deng, Z.; Zhao, C. S.; Moerman, M.; Henzing, B.; de Leeuw, G.

2010-12-01

Particle mobility size spectrometers often referred to as DMPS (Differential Mobility Particle Sizers) or SMPS (Scanning Mobility Particle Sizers) have found a wide application in atmospheric aerosol research. However, comparability of measurements conducted world-wide is hampered by lack of generally accepted technical standards with respect to the instrumental set-up, measurement mode, data evaluation as well as quality control. This article results from several instrument intercomparison workshops conducted within the European infrastructure project EUSAAR (European Supersites for Atmospheric Aerosol Research). Under controlled laboratory conditions, the number size distribution from 20 to 200 nm determined by mobility size spectrometers of different design are within an uncertainty range of ±10% after correcting internal particle losses, while below and above this size range the discrepancies increased. Instruments with identical design agreed within ±3% in the peak number concentration when all settings were done carefully. Technical standards were developed for a minimum requirement of mobility size spectrometry for atmospheric aerosol measurements. Technical recommendations are given for atmospheric measurements including continuous monitoring of flow rates, temperature, pressure, and relative humidity for the sheath and sample air in the differential mobility analyser. In cooperation with EMEP (European Monitoring and Evaluation Program), a new uniform data structure was introduced for saving and disseminating the data within EMEP. This structure contains three levels: raw data, processed data, and final particle size distributions. Importantly, we recommend reporting raw measurements including all relevant instrument parameters as well as a complete documentation on all data transformation and correction steps. These technical and data structure standards aim to enhance the quality of long-term size distribution measurements, their comparability between different networks and sites, and their transparency and traceability back to raw data.

Tests of Mediation: Paradoxical Decline in Statistical Power as a Function of Mediator Collinearity

PubMed Central

Beasley, T. Mark

2013-01-01

Increasing the correlation between the independent variable and the mediator (a coefficient) increases the effect size (ab) for mediation analysis; however, increasing a by definition increases collinearity in mediation models. As a result, the standard error of product tests increase. The variance inflation due to increases in a at some point outweighs the increase of the effect size (ab) and results in a loss of statistical power. This phenomenon also occurs with nonparametric bootstrapping approaches because the variance of the bootstrap distribution of ab approximates the variance expected from normal theory. Both variances increase dramatically when a exceeds the b coefficient, thus explaining the power decline with increases in a. Implications for statistical analysis and applied researchers are discussed. PMID:24954952

Revision of the design of a standard for the dimensions of school furniture.

PubMed

Molenbroek, J F M; Kroon-Ramaekers, Y M T; Snijders, C J

2003-06-10

In this study an anthropometric design process was followed. The aim was to improve the fit of school furniture sizes for European children. It was demonstrated statistically that the draft of a European standard does not cover the target population. No literature on design criteria for sizes exists, and in practice it is common to calculate the fit for only the mean values (P50). The calculations reported here used body dimensions of Dutch children, measured by the authors' Department, and used data from German and British national standards. A design process was followed that contains several steps, including: Target group, Anthropometric model and Percentage exclusion. The criteria developed in this study are (1) a fit on the basis of 1% exclusion (P1 or P99), and (2) a prescription based on popliteal height. Based on this new approach it was concluded that prescription of a set size should be based on popliteal height rather than body height. The drafted standard, Pren 1729, can be improved with this approach. A European standard for school furniture should include the exception that for Dutch children an extra large size is required.

Toward customer-centric organizational science: A common language effect size indicator for multiple linear regressions and regressions with higher-order terms.

PubMed

Krasikova, Dina V; Le, Huy; Bachura, Eric

2018-06-01

To address a long-standing concern regarding a gap between organizational science and practice, scholars called for more intuitive and meaningful ways of communicating research results to users of academic research. In this article, we develop a common language effect size index (CLβ) that can help translate research results to practice. We demonstrate how CLβ can be computed and used to interpret the effects of continuous and categorical predictors in multiple linear regression models. We also elaborate on how the proposed CLβ index is computed and used to interpret interactions and nonlinear effects in regression models. In addition, we test the robustness of the proposed index to violations of normality and provide means for computing standard errors and constructing confidence intervals around its estimates. (PsycINFO Database Record (c) 2018 APA, all rights reserved).