Introduction to Communication, Grades 6-8 [with CD-ROM]. The Math Process Standards, Grades 6-8 Series

ERIC Educational Resources Information Center

O'Connell, Susan; Croskey, Suzanne G.

2008-01-01

The National Council of Teachers of Mathematics' (NCTM's) Process Standards support teaching that helps students develop independent, effective mathematical thinking. The books in the Heinemann Math Process Standards Series give every middle grades math teacher the opportunity to explore each standard in depth. The series offers friendly,…

Introduction to Problem Solving, Grades 6-8 [with CD-ROM]. The Math Process Standards, Grades 6-8 Series

ERIC Educational Resources Information Center

Schackow, Joy Bronston; O'Connell, Susan

2008-01-01

The National Council of Teachers of Mathematics' (NCTM's) Process Standards support teaching that helps students develop independent, effective mathematical thinking. The books in the Heinemann Math Process Standards Series give every middle grades math teacher the opportunity to explore each standard in depth. The series offers friendly,…

Needed: A Standard Information Processing Model of Learning and Learning Processes.

ERIC Educational Resources Information Center

Carifio, James

One strategy to prevent confusion as new paradigms emerge is to have professionals in the area develop and use a standard model of the phenomenon in question. The development and use of standard models in physics, genetics, archaeology, and cosmology have been very productive. The cognitive revolution in psychology and education has produced a…

Architecture for Survivable System Processing (ASSP)

NASA Astrophysics Data System (ADS)

Wood, Richard J.

1991-11-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Architecture for Survivable System Processing (ASSP)

NASA Technical Reports Server (NTRS)

Wood, Richard J.

1991-01-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Health Data Standards and Adoption Process: Preliminary Findings of a Qualitative Study in Saudi Arabia

ERIC Educational Resources Information Center

Alkraiji, Abdullah; Jackson, Thomas; Murray, Ian

2011-01-01

Purpose: This paper seeks to carry out a critical study of health data standards and adoption process with a focus on Saudi Arabia. Design/methodology/approach: Many developed nations have initiated programs to develop, promote, adopt and customise international health data standards to the local needs. The current status of, and future plans for,…

British Thoracic Society quality standards for the investigation and management of pulmonary nodules.

PubMed

Baldwin, David; Callister, Matthew; Akram, Ahsan; Cane, Paul; Draffan, Jeanette; Franks, Kevin; Gleeson, Fergus; Graham, Richard; Malhotra, Puneet; Pearson, Philip; Subesinghe, Manil; Waller, David; Woolhouse, Ian

2018-01-01

The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the investigation and management of pulmonary nodules in the UK, together with measurable markers of good practice. Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. 7 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for the investigation and management of pulmonary nodules, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. BTS Quality Standards for the investigation and management of pulmonary nodules form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline recommendations.

British Thoracic Society quality standards for home oxygen use in adults

PubMed Central

Suntharalingam, Jay; Wilkinson, Tom; Annandale, Joseph; Davey, Claire; Fielding, Rhea; Freeman, Daryl; Gibbons, Michael; Hardinge, Maxine; Hippolyte, Sabrine; Knowles, Vikki; Lee, Cassandra; MacNee, William; Pollington, Jacqueline; Vora, Vandana; Watts, Trefor; Wijesinghe, Meme

2017-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for home oxygen provision in the UK, together with measurable markers of good practice. Quality statements are based on the British Thoracic Society (BTS) Guideline for Home Oxygen Use in Adults. Methods Development of BTS Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 10 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for home oxygen use, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. Discussion BTS Quality Standards for home oxygen use in adults form a key part of the range of supporting materials that the society produces to assist in the dissemination and implementation of a guideline’s recommendations. PMID:29018527

British Thoracic Society quality standards for the investigation and management of pulmonary nodules

PubMed Central

Baldwin, David; Callister, Matthew; Akram, Ahsan; Cane, Paul; Draffan, Jeanette; Franks, Kevin; Gleeson, Fergus; Graham, Richard; Malhotra, Puneet; Pearson, Philip; Subesinghe, Manil; Waller, David; Woolhouse, Ian

2018-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the investigation and management of pulmonary nodules in the UK, together with measurable markers of good practice. Methods Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 7 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for the investigation and management of pulmonary nodules, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. Discussion BTS Quality Standards for the investigation and management of pulmonary nodules form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline recommendations. PMID:29682290

40 CFR 63.543 - What are my standards for process vents?

Code of Federal Regulations, 2013 CFR

2013-07-01

... available. You must develop and follow standard operating procedures designed to minimize emissions of total... the manufacturer's recommended procedures, if available, and the standard operating procedures... 40 Protection of Environment 10 2013-07-01 2013-07-01 false What are my standards for process...

40 CFR 63.543 - What are my standards for process vents?

Code of Federal Regulations, 2012 CFR

2012-07-01

... available. You must develop and follow standard operating procedures designed to minimize emissions of total... the manufacturer's recommended procedures, if available, and the standard operating procedures... 40 Protection of Environment 10 2012-07-01 2012-07-01 false What are my standards for process...

Development of Entry-Level Competence Tests: A Strategy for Evaluation of Vocational Education Training Systems

ERIC Educational Resources Information Center

Schutte, Marc; Spottl, Georg

2011-01-01

Developing countries such as Malaysia and Oman have recently established occupational standards based on core work processes (functional clusters of work objects, activities and performance requirements), to which competencies (performance determinants) can be linked. While the development of work-process-based occupational standards is supposed…

EPA Region 7 and Four States Water Quality Standards Review Process Kaizen Event

EPA Pesticide Factsheets

The submittal, review and approval process of the EPA–State process for developing and revising Water Quality Standards (WQS) was the focus of a Lean business process improvement kaizen event in June 2007.

IS0 9000 Implementation and Assessment: A Guide to Developing and Evaluating Quality Management Systems

NASA Technical Reports Server (NTRS)

Navarro, Robert J.; Grimm, Barry

1996-01-01

The agency has developed this reference publication to aid NASA organizations and their suppliers in the transition to IS0 9000. This guide focuses on the standard s intent, clarifies its requirements, offers implementation examples and highlights interrelated areas. It can assist anyone developing or evaluating NASA or supplier quality management systems. The IS0 9000 standards contain the basic elements for managing those processes that affect an organization's ability to consistently meet customer requirements. IS0 9000 was developed through the International Organization for Standardization and has been adopted as the US. national standard. These standards define a flexible foundation for customer focused process measurement, management and improvement that is the hallmark of world class enterprises.

75 FR 35021 - Reliability Standards Development and NERC and Regional Entity Enforcement; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... Standards Development and NERC and Regional Entity Enforcement; Notice of Technical Conference June 15, 2010... Technical Conference to address industry perspectives on certain issues pertaining to the development and... Electric Reliability Organization's (ERO) standards development process; communication and interactions...

75 FR 34452 - Center for Drug Evaluation and Research Data Standards Plan; Availability for Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-17

... identifies key objectives for a data standards program at CDER, processes to be developed to ensure... public health mission. At present, the lack of standardized data affects CDER's review processes by...-emerging issues. Standardization of data submissions, a requirement for electronic submissions, and a...

40 CFR 63.543 - What are my standards for process vents?

Code of Federal Regulations, 2014 CFR

2014-07-01

... develop and follow standard operating procedures designed to minimize emissions of total hydrocarbon for... manufacturer's recommended procedures, if available, and the standard operating procedures designed to minimize... 40 Protection of Environment 10 2014-07-01 2014-07-01 false What are my standards for process...

Proposal for establishing structure and process in the development of implicit chiropractic standards of care and practice guidelines.

PubMed

Hansen, D T; Adams, A H; Meeker, W C; Phillips, R B

1992-09-01

With the advent of health care's "era of accountability", the chiropractic profession is now faced with generating implicit standards and guidelines for care or having it done for us by outside agencies. Already we see chiropractic groups in individual states and provinces being pressured into naive efforts of guideline development. Current knowledge and experience are available through recent health care literature that clearly defines the structure and process of guideline development and offers suggestions on how to measure outcomes of those processes. In addition, the United States Congress has directed a new federal agency to oversee this activity and monitor outcomes of quality improvement programs. The time has come for the chiropractic profession to define its exact role in health care delivery and develop implicit standards of care and practice guidelines. This sentinel effort should be managed by a commissioned body of empaneled experts that generally represent the academic and clinical chiropractic profession. A protocol for selection of these panelists and the panel chairperson needs to be developed and memorialized. Appropriate methodology (with definitions) needs to be developed for the process of standards/guideline development. Adherence to the accepted structure and process of guideline development will ensure the continuity of this dynamic process in the coming generations. This proposal offers a preliminary definition of the structure and process, including a "seed" policy statement and decision flow chart, specific to guideline development. Once the structure and process of guideline development for chiropractic are defined, the profession can then present this product to federal and state agencies, private sector health care purchasers, patient advocacy groups and other stakeholders of chiropractic care.(ABSTRACT TRUNCATED AT 250 WORDS)

The DACUM Job Analysis Process.

ERIC Educational Resources Information Center

Dofasco, Inc., Hamilton (Ontario).

This document explains the DACUM (Developing A Curriculum) process for analyzing task-based jobs to: identify where standard operating procedures are required; identify duplicated low value added tasks; develop performance standards; create job descriptions; and identify the elements that must be included in job-specific training programs. The…

Software Development Standard Processes (SDSP)

NASA Technical Reports Server (NTRS)

Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.;

A Guide for Developing Standard Operating Job Procedures for the Activated Sludge - Aeration & Sedimentation Process Wastewater Treatment Facility. SOJP No. 5.

ERIC Educational Resources Information Center

Mason, George J.

This guide for developing standard operating job procedures for wastewater treatment facilities is devoted to the activated sludge aeration and sedimentation process. This process is for conversion of nonsettleable and nonfloatable materials in wastewater to settleable, floculated biological groups and separation of the settleable solids from the…

The Elements of an Effective Software Development Plan - Software Development Process Guidebook

DTIC Science & Technology

2011-11-11

standards and practices required for all XMPL software development. This SDP implements the <corporate> Standard Software Process (SSP). as tailored...Developing and integrating reusable software products • Approach to managing COTS/Reuse software implementation • COTS/Reuse software selection...final selection and submit to change board for approval MAINTENANCE Monitor current products for obsolescence or end of support Track new

Software Certification - Coding, Code, and Coders

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Holzmann, Gerard J.

2011-01-01

We describe a certification approach for software development that has been adopted at our organization. JPL develops robotic spacecraft for the exploration of the solar system. The flight software that controls these spacecraft is considered to be mission critical. We argue that the goal of a software certification process cannot be the development of "perfect" software, i.e., software that can be formally proven to be correct under all imaginable and unimaginable circumstances. More realistically, the goal is to guarantee a software development process that is conducted by knowledgeable engineers, who follow generally accepted procedures to control known risks, while meeting agreed upon standards of workmanship. We target three specific issues that must be addressed in such a certification procedure: the coding process, the code that is developed, and the skills of the coders. The coding process is driven by standards (e.g., a coding standard) and tools. The code is mechanically checked against the standard with the help of state-of-the-art static source code analyzers. The coders, finally, are certified in on-site training courses that include formal exams.

British Thoracic Society Quality Standards for acute non-invasive ventilation in adults

PubMed Central

Davies, Michael; Allen, Martin; Bentley, Andrew; Bourke, Stephen C; Creagh-Brown, Ben; D’Oliveiro, Rachel; Glossop, Alastair; Gray, Alasdair; Jacobs, Phillip; Mahadeva, Ravi; Moses, Rachael; Setchfield, Ian

2018-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the provision of acute non-invasive ventilation in adults together with measurable markers of good practice. Methods Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 6 quality statements have been developed, each describing a standard of care for the provision of acute non-invasive ventilation in the UK, together with measurable markers of good practice. Conclusion BTS Quality Standards for acute non-invasive ventilation in adults form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline’s recommendations. PMID:29636979

Building SAWE Capability as an ANSI Accredited Standards Developer

NASA Technical Reports Server (NTRS)

Cerro, Jeffrey A.; Davis, Ed; Peterson, Eric; Griffiths, William T.; Brooks, Andy; Stratton, Bonnie; Attar, Jose

2014-01-01

This paper presents a 2014 status of the Society of Allied Weight Engineers' process towards becoming an Accredited Standards Developer (ASD) under certification by the United States American National Standards Institute (ANSI). Included is material from the committee's 2013 International presentation, current status, and additional general background material. The document strives to serve as a reference point to assist SAWE Recommended Practice and Standards developers in negotiating United States Standards Strategy, international standards strategy, and the association of SAWE standards and recommended practices to those efforts. Required procedures for SAWE to develop and maintain Recommended Practices and ANSI/SAWE Standards are reviewed.

The IEEE Software Engineering Standards Process

PubMed Central

Buckley, Fletcher J.

1984-01-01

Software Engineering has emerged as a field in recent years, and those involved increasingly recognize the need for standards. As a result, members of the Institute of Electrical and Electronics Engineers (IEEE) formed a subcommittee to develop these standards. This paper discusses the ongoing standards development, and associated efforts.

Oki-Doku: Number Puzzles

ERIC Educational Resources Information Center

Gomez, Cristina; Novak, Dani

2014-01-01

The Common Core State Standards for Mathematics (CCSSM) (CCSSI 2010) emphasize the Standards for Mathematical Practice (SMP) that describe processes and proficiencies included in the NCTM Process Standards (NCTM 2000) and in the Strands for Mathematical Proficiency (NRC 2001). The development of these mathematical practices should happen in…

IEC 61511 and the capital project process--a protective management system approach.

PubMed

Summers, Angela E

2006-03-17

This year, the process industry has reached an important milestone in process safety-the acceptance of an internationally recognized standard for safety instrumented systems (SIS). This standard, IEC 61511, documents good engineering practice for the assessment, design, operation, maintenance, and management of SISs. The foundation of the standard is established by several requirements in Part 1, Clauses 5-7, which cover the development of a management system aimed at ensuring that functional safety is achieved. The management system includes a quality assurance process for the entire SIS lifecycle, requiring the development of procedures, identification of resources and acquisition of tools. For maximum benefit, the deliverables and quality control checks required by the standard should be integrated into the capital project process, addressing safety, environmental, plant productivity, and asset protection. Industry has become inundated with a multitude of programs focusing on safety, quality, and cost performance. This paper introduces a protective management system, which builds upon the work process identified in IEC 61511. Typical capital project phases are integrated with the management system to yield one comprehensive program to efficiently manage process risk. Finally, the paper highlights areas where internal practices or guidelines should be developed to improve program performance and cost effectiveness.

Developing policy, standard orders, and quality-assurance monitoring for palliative sedation therapy.

PubMed

Ghafoor, Virginia L; Silus, Lauren S

2011-03-15

The development of a policy, evidence-based standard orders, and monitoring for palliative sedation therapy (PST) is described. Concerns regarding PST at the University of Minnesota Medical Center (UMMC) arose and needed to be addressed in a formal process. A multidisciplinary group consisting of palliative care physicians, nurse practitioners, clinical nurse specialists, and clinical pharmacy specialists reached consensus on the practice model and medications to be used for PST. Major elements of the plan included the development and implementation of an institutional policy for palliative sedation; standard orders for patient care, sedation, and monitoring; education for staff, patients, and patients' family members; and quality-assurance monitoring. A literature review was performed to identify research and guidelines defining the practice of PST. Policy content includes the use of a standard order set linking patient care, medication administration, the monitoring of sedation, and symptom management. Approval of the policy involved several UMMC committees. An evaluation matrix was used to determine critical areas for PST monitoring and to guide development of a form to monitor quality. A retrospective chart audit using the quality-assurance monitoring form assessed baseline sedation medication and patient outcomes. Assessment of compliance began in the fall of 2008, after the policy and standard orders were approved by the UMMC medical executive committee. In 2008, two cases of PST were monitored using the standardized form. PST cases will be continually monitored and analyzed. Development of policy, standard orders, and quality-assurance monitoring for PST required a formal multidisciplinary process. A process-improvement process is critical to defining institutional policy, educational goals, and outcome metrics for PST.

Helping Standards Make the Grade.

ERIC Educational Resources Information Center

Guskey, Thomas R.

2001-01-01

Educators can develop fair and accurate standards-based grading/reporting by switching to criterion-referenced grading practices; using differentiated criteria (denoting product, process, and progress); clarifying the purpose of each reporting tool; and developing a reporting form that identifies standards, facilitates interpretation, and…

Development of shared decision-making resources to help inform difficult healthcare decisions: An example focused on dysvascular partial foot and transtibial amputations.

PubMed

Quigley, Matthew; Dillon, Michael P; Fatone, Stefania

2018-02-01

Shared decision making is a consultative process designed to encourage patient participation in decision making by providing accurate information about the treatment options and supporting deliberation with the clinicians about treatment options. The process can be supported by resources such as decision aids and discussion guides designed to inform and facilitate often difficult conversations. As this process increases in use, there is opportunity to raise awareness of shared decision making and the international standards used to guide the development of quality resources for use in areas of prosthetic/orthotic care. To describe the process used to develop shared decision-making resources, using an illustrative example focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Development process: The International Patient Decision Aid Standards were used to guide the development of the decision aid and discussion guide focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Examples from these shared decision-making resources help illuminate the stages of development including scoping and design, research synthesis, iterative development of a prototype, and preliminary testing with patients and clinicians not involved in the development process. Lessons learnt through the process, such as using the International Patient Decision Aid Standards checklist and development guidelines, may help inform others wanting to develop similar shared decision-making resources given the applicability of shared decision making to many areas of prosthetic-/orthotic-related practice. Clinical relevance Shared decision making is a process designed to guide conversations that help patients make an informed decision about their healthcare. Raising awareness of shared decision making and the international standards for development of high-quality decision aids and discussion guides is important as the approach is introduced in prosthetic-/orthotic-related practice.

76 FR 16277 - System Restoration Reliability Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-23

... system restoration process. The Commission also approves the NERC's proposal to retire four existing EOP... prepare personnel to enable effective coordination of the system restoration process. The Commission also..., through the Reliability Standard development process, a modification to EOP-005-1 that identifies time...

FDA recognition of consensus standards in the premarket notification program.

PubMed

Marlowe, D E; Phillips, P J

1998-01-01

"The FDA has long advocated the use of standards as a significant contributor to safety and effectiveness of medical devices," Center for Devices and Radiological Health's (CDRH) Donald E. Marlowe and Philip J. Phillips note in the following article, highlighting the latest U.S. Food and Drug Administration (FDA) plans for use of standards. They note that the important role standards can play has been reinforced as part of FDA reengineering efforts undertaken in anticipation of an increased regulatory work-load and declining agency resources. As part of its restructuring effort, the FDA announced last spring that it would recognize some consensus standards for use in the device approval process. Under the new 510(k) paradigm--the FDA's proposal to streamline premarket review, which includes incorporating the use of standards in the review of 510(k) submissions--the FDA will accept proof of compliance with standards as evidence of device safety and effectiveness. Manufacturers may submit declarations of conformity to standards instead of following the traditional review process. The International Electrotechnical Commission (IEC) 60601 series of consensus standards, which deals with many safety issues common to electrical medical devices, was the first to be chosen for regulatory review. Other standards developed by nationally or internationally recognized standards development organizations, such as AAMI, may be eligible for use to ensure review requirements. In the following article, Marlowe and Phillips describe the FDA's plans to use standards in the device review process. The article focuses on the use of standards for medical device review, the development of the standards recognition process for reviewing devices, and the anticipated benefits of using standards to review devices. One important development has been the recent implementation of the FDA Modernization Act of 1997 (FDAMA), which advocates the use of standards in the device review process. In implementing the legislation, the FDA published in the Federal Register a list of standards to which manufacturers may declare conformity. Visit AAMI's Web site at www.aami.org/news/fda.standards for a copy of the list and for information on nominating other standards for official recognition by the agency. The FDA expects that use of standards will benefit the agency and manufacturers alike: "We estimate that in time, reliance on declarations of conformity to recognized standards could save the agency considerable resources while reducing the regulatory obstacles to entry to domestic and international markets," state the authors.

The Next Generation Science Standards: The Features and Challenges

ERIC Educational Resources Information Center

Pruitt, Stephen L.

2014-01-01

Beginning in January of 2010, the Carnegie Corporation of New York funded a two-step process to develop a new set of state developed science standards intended to prepare students for college and career readiness in science. These new internationally benchmarked science standards, the Next Generation Science Standards (NGSS) were completed in…

The Alignment of CEC/DEC and NAEYC Personnel Preparation Standards

ERIC Educational Resources Information Center

Chandler, Lynette K.; Cochran, Deborah C.; Christensen, Kimberly A.; Dinnebeil, Laurie A.; Gallagher, Peggy A.; Lifter, Karin; Stayton, Vicki D.; Spino, Margie

2012-01-01

This article describes the process for alignment of the personnel preparation standards developed by the Council for Exceptional Children and Division for Early Childhood with the standards developed by the National Association for the Education of Young Children. The results identify areas of convergence across the two sets of standards and areas…

Professional Standards for Australian Special Education Teachers

ERIC Educational Resources Information Center

Dempsey, Ian; Dally, Kerry

2014-01-01

Although professional standards for Australian teachers were developed several years ago, this country is yet to develop such standards for special education teachers. The lack of standards for the special education profession is associated with the absence of a consistent process of accreditation in Australia and a lack of clarity in the pathways…

Process Improvement in a Radically Changing Organization

NASA Technical Reports Server (NTRS)

Varga, Denise M.; Wilson, Barbara M.

2007-01-01

This presentation describes how the NASA Glenn Research Center planned and implemented a process improvement effort in response to a radically changing environment. As a result of a presidential decision to redefine the Agency's mission, many ongoing projects were canceled and future workload would be awarded based on relevance to the Exploration Initiative. NASA imposed a new Procedural Requirements standard on all future software development, and the Center needed to redesign its processes from CMM Level 2 objectives to meet the new standard and position itself for CMMI. The intended audience for this presentation is systems/software developers and managers in a large, research-oriented organization that may need to respond to imposed standards while also pursuing CMMI Maturity Level goals. A set of internally developed tools will be presented, including an overall Process Improvement Action Item database, a formal inspection/peer review tool, metrics collection spreadsheet, and other related technologies. The Center also found a need to charter Technical Working Groups (TWGs) to address particular Process Areas. In addition, a Marketing TWG was needed to communicate the process changes to the development community, including an innovative web site portal.

Improving the safety and quality of nursing care through standardized operating procedures in Bosnia and Herzegovina.

PubMed

Ausserhofer, Dietmar; Rakic, Severin; Novo, Ahmed; Dropic, Emira; Fisekovic, Eldin; Sredic, Ana; Van Malderen, Greet

2016-06-01

We explored how selected 'positive deviant' healthcare facilities in Bosnia and Herzegovina approach the continuous development, adaptation, implementation, monitoring and evaluation of nursing-related standard operating procedures. Standardized nursing care is internationally recognized as a critical element of safe, high-quality health care; yet very little research has examined one of its key instruments: nursing-related standard operating procedures. Despite variability in Bosnia and Herzegovina's healthcare and nursing care quality, we assumed that some healthcare facilities would have developed effective strategies to elevate nursing quality and safety through the use of standard operating procedures. Guided by the 'positive deviance' approach, we used a multiple-case study design to examine a criterion sample of four facilities (two primary healthcare centres and two hospitals), collecting data via focus groups and individual interviews. In each studied facility, certification/accreditation processes were crucial to the initiation of continuous development, adaptation, implementation, monitoring and evaluation of nursing-related SOPs. In one hospital and one primary healthcare centre, nurses working in advanced roles (i.e. quality coordinators) were responsible for developing and implementing nursing-related standard operating procedures. Across the four studied institutions, we identified a consistent approach to standard operating procedures-related processes. The certification/accreditation process is enabling necessary changes in institutions' organizational cultures, empowering nurses to take on advanced roles in improving the safety and quality of nursing care. Standardizing nursing procedures is key to improve the safety and quality of nursing care. Nursing and Health Policy are needed in Bosnia and Herzegovina to establish a functioning institutional framework, including regulatory bodies, educational systems for developing nurses' capacities or the inclusion of nursing-related standard operating procedures in certification/accreditation standards. © 2016 International Council of Nurses.

The coming commoditization of processes.

PubMed

Davenport, Thomas H

2005-06-01

Despite the much-ballyhooed increase in outsourcing, most companies are in do-it-yourself mode for the bulk of their processes, in large part because there's no way to compare outside organizations' capabilities with those of internal functions. Given the lack of comparability, it's almost surprising that anyone outsources today. But it's not surprising that cost is by far companies' primary criterion for evaluating outsourcers or that many companies are dissatisfied with their outsourcing relationships. A new world is coming, says the author, and it will lead to dramatic changes in the shape and structure of corporations. A broad set of process standards will soon make it easy to determine whether a business capability can be improved by outsourcing it. Such standards will also help businesses compare service providers and evaluate the costs versus the benefits of outsourcing. Eventually these costs and benefits will be so visible to buyers that outsourced processes will become a commodity, and prices will drop significantly. The low costs and low risk of outsourcing will accelerate the flow of jobs offshore, force companies to reassess their strategies, and change the basis of competition. The speed with which some businesses have already adopted process standards suggests that many previously unscrutinized areas are ripe for change. In the field of technology, for instance, the Carnegie Mellon Software Engineering Institute has developed a global standard for software development processes, called the Capability Maturity Model (CMM). For companies that don't have process standards in place, it makes sense for them to create standards by working with customers, competitors, software providers, businesses that processes may be outsourced to, and objective researchers and standard-setters. Setting standards is likely to lead to the improvement of both internal and outsourced processes.

.NET INTEROPERABILITY GUIDELINES

EPA Science Inventory

The CAPE-OPEN middleware standards were created to allow process modelling components (PMCs) developed by third parties to be used in any process modelling environment (PME) utilizing these standards. The CAPE-OPEN middleware specifications were based upon both Microsoft's Compo...

Non-prescription medicines: a process for standards development and testing in community pharmacy.

PubMed

Benrimoj, Shalom Charlie I; Gilbert, Andrew; Quintrell, Neil; Neto, Abilio C de Almeida

2007-08-01

The objective of the study was to develop and test standards of practice for handling non-prescription medicines. In consultation with pharmacy registering authorities, key professional and consumer groups and selected community pharmacists, standards of practice were developed in the areas of Resource Management; Professional Practice; Pharmacy Design and Environment; and Rights and Needs of Customers. These standards defined and described minimum professional activities required in the provision of non-prescription medicines at a consistent and measurable level of practice. Seven standards were described and further defined by 20 criteria, including practice indicators. The Standards were tested in 40 community pharmacies in two States and after further adaptation, endorsed by all Australian pharmacy registering authorities and major Australian pharmacy and consumer organisations. The consultation process effectively engaged practicing pharmacists in developing standards to enable community pharmacists meet their legislative and professional responsibilities. Community pharmacies were audited against a set of standards of practice for handling non-prescription medicines developed in this project. Pharmacies were audited on the Standards at baseline, mid-intervention and post-intervention. Behavior of community pharmacists and their staff in relation to these standards was measured by conducting pseudo-patron visits to participating pharmacies. The testing process demonstrated a significant improvement in the quality of service delivered by staff in community pharmacies in the management of requests involving non-prescription medicines. The use of pseudo-patron visits, as a training tool with immediate feedback, was an acceptable and effective method of achieving changes in practice. Feedback from staff in the pharmacies regarding the pseudo-patron visits was very positive. Results demonstrated the methodology employed was effective in increasing overall compliance with the Standards from a rate of 47.4% to 70.0% (P < 0.01). This project led to a recommendation for the development and execution of a national implementation strategy.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spickett, Jeffery, E-mail: J.Spickett@curtin.edu.au; Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia; Katscherian, Dianne

The approaches used for setting or reviewing air quality standards vary from country to country. The purpose of this research was to consider the potential to improve decision-making through integration of HIA into the processes to review and set air quality standards used in Australia. To assess the value of HIA in this policy process, its strengths and weaknesses were evaluated aligned with review of international processes for setting air quality standards. Air quality standard setting programmes elsewhere have either used HIA or have amalgamated and incorporated factors normally found within HIA frameworks. They clearly demonstrate the value of amore » formalised HIA process for setting air quality standards in Australia. The following elements should be taken into consideration when using HIA in standard setting. (a) The adequacy of a mainly technical approach in current standard setting procedures to consider social determinants of health. (b) The importance of risk assessment criteria and information within the HIA process. The assessment of risk should consider equity, the distribution of variations in air quality in different locations and the potential impacts on health. (c) The uncertainties in extrapolating evidence from one population to another or to subpopulations, especially the more vulnerable, due to differing environmental factors and population variables. (d) The significance of communication with all potential stakeholders on issues associated with the management of air quality. In Australia there is also an opportunity for HIA to be used in conjunction with the NEPM to develop local air quality standard measures. The outcomes of this research indicated that the use of HIA for air quality standard setting at the national and local levels would prove advantageous. -- Highlights: • Health Impact Assessment framework has been applied to a policy development process. • HIA process was evaluated for application in air quality standard setting. • Advantages of HIA in the air quality standard setting process are demonstrated.« less

Design of experiments enhanced statistical process control for wind tunnel check standard testing

NASA Astrophysics Data System (ADS)

Phillips, Ben D.

The current wind tunnel check standard testing program at NASA Langley Research Center is focused on increasing data quality, uncertainty quantification and overall control and improvement of wind tunnel measurement processes. The statistical process control (SPC) methodology employed in the check standard testing program allows for the tracking of variations in measurements over time as well as an overall assessment of facility health. While the SPC approach can and does provide researchers with valuable information, it has certain limitations in the areas of process improvement and uncertainty quantification. It is thought by utilizing design of experiments methodology in conjunction with the current SPC practices that one can efficiently and more robustly characterize uncertainties and develop enhanced process improvement procedures. In this research, methodologies were developed to generate regression models for wind tunnel calibration coefficients, balance force coefficients and wind tunnel flow angularities. The coefficients of these regression models were then tracked in statistical process control charts, giving a higher level of understanding of the processes. The methodology outlined is sufficiently generic such that this research can be applicable to any wind tunnel check standard testing program.

Extracting business vocabularies from business process models: SBVR and BPMN standards-based approach

NASA Astrophysics Data System (ADS)

Skersys, Tomas; Butleris, Rimantas; Kapocius, Kestutis

2013-10-01

Approaches for the analysis and specification of business vocabularies and rules are very relevant topics in both Business Process Management and Information Systems Development disciplines. However, in common practice of Information Systems Development, the Business modeling activities still are of mostly empiric nature. In this paper, basic aspects of the approach for business vocabularies' semi-automated extraction from business process models are presented. The approach is based on novel business modeling-level OMG standards "Business Process Model and Notation" (BPMN) and "Semantics for Business Vocabularies and Business Rules" (SBVR), thus contributing to OMG's vision about Model-Driven Architecture (MDA) and to model-driven development in general.

NASA Standard for Models and Simulations: Credibility Assessment Scale

NASA Technical Reports Server (NTRS)

Babula, Maria; Bertch, William J.; Green, Lawrence L.; Hale, Joseph P.; Mosier, Gary E.; Steele, Martin J.; Woods, Jody

2009-01-01

As one of its many responses to the 2003 Space Shuttle Columbia accident, NASA decided to develop a formal standard for models and simulations (M&S). Work commenced in May 2005. An interim version was issued in late 2006. This interim version underwent considerable revision following an extensive Agency-wide review in 2007 along with some additional revisions as a result of the review by the NASA Engineering Management Board (EMB) in the first half of 2008. Issuance of the revised, permanent version, hereafter referred to as the M&S Standard or just the Standard, occurred in July 2008. Bertch, Zang and Steeleiv provided a summary review of the development process of this standard up through the start of the review by the EMB. A thorough recount of the entire development process, major issues, key decisions, and all review processes are available in Ref. v. This is the second of a pair of papers providing a summary of the final version of the Standard. Its focus is the Credibility Assessment Scale, a key feature of the Standard, including an example of its application to a real-world M&S problem for the James Webb Space Telescope. The companion paper summarizes the overall philosophy of the Standard and an overview of the requirements. Verbatim quotes from the Standard are integrated into the text of this paper, and are indicated by quotation marks.

Examining Perceptions over the Effectiveness of Professional Development and Available Resources on the Common Core State Standards Implementation in Arkansas

ERIC Educational Resources Information Center

Sheppard, Julie Trammell

2013-01-01

The purpose of this qualitative case study is to examine the perceptions of teachers and curriculum specialists over the effectiveness of professional development and available resources of the Common Core State Standards (CCSS) implementation process in Arkansas. Arkansas divided the implementation process into three stages: Phase I implemented…

CFD Process Pre- and Post-processing Automation in Support of Space Propulsion

NASA Technical Reports Server (NTRS)

Dorney, Suzanne M.

2003-01-01

The use of Computational Fluid Dynamics or CFD has become standard practice in the design and analysis of the major components used for space propulsion. In an attempt to standardize and improve the CFD process a series of automated tools have been developed. Through the use of these automated tools the application of CFD to the design cycle has been improved and streamlined. This paper presents a series of applications in which deficiencies were identified in the CFD process and corrected through the development of automated tools.

Workshop on LCA: Methodology, Current Development, and Application in Standards - LCA Methodology

EPA Science Inventory

As ASTM standards are being developed including Life Cycle Assessment within the Standards it is imperative that practitioners in the field learn more about what LCA is, and how to conduct it. This presentation will include an overview of the LCA process and will concentrate on ...

21 CFR 861.20 - Summary of standards development process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... accordance with section 513(e) of the act to reclassify the device; or (3) Take other appropriate action. [57... (CONTINUED) MEDICAL DEVICES PROCEDURES FOR PERFORMANCE STANDARDS DEVELOPMENT Procedures for Performance... which a performance standard for a device may be established, amended, or revoked is as follows: (a) The...

Fissures in Standards Formulation: The Role of Neoconservative and Neoliberal Discourses in Justifying Standards Development in Wisconsin and Minnesota

ERIC Educational Resources Information Center

Caughlan, Samantha; Beach, Richard

2007-01-01

An analysis of English/language arts standards development in Wisconsin and Minnesota in the late 1990s and early 2000s shows a process of compromise between neoliberal and neoconservative factions involved in promoting and writing standards, with the voices of educators conspicuously absent. Interpretive and critical discourse analyses of…

Expanding biological data standards development processes for US IOOS: visual line transect observing community for mammal, bird, and turtle data

USGS Publications Warehouse

Fornwall, M.; Gisiner, R.; Simmons, S. E.; Moustahfid, Hassan; Canonico, G.; Halpin, P.; Goldstein, P.; Fitch, R.; Weise, M.; Cyr, N.; Palka, D.; Price, J.; Collins, D.

2012-01-01

The US Integrated Ocean Observing System (IOOS) has recently adopted standards for biological core variables in collaboration with the US Geological Survey/Ocean Biogeographic Information System (USGS/OBIS-USA) and other federal and non-federal partners. In this Community White Paper (CWP) we provide a process to bring into IOOS a rich new source of biological observing data, visual line transect surveys, and to establish quality data standards for visual line transect observations, an important source of at-sea bird, turtle and marine mammal observation data. The processes developed through this exercise will be useful for other similar biogeographic observing efforts, such as passive acoustic point and line transect observations, tagged animal data, and mark-recapture (photo-identification) methods. Furthermore, we suggest that the processes developed through this exercise will serve as a catalyst for broadening involvement by the larger marine biological data community within the goals and processes of IOOS.

Digital health technology and trauma: development of an app to standardize care.

PubMed

Hsu, Jeremy M

2015-04-01

Standardized practice results in less variation, therefore reducing errors and improving outcome. Optimal trauma care is achieved through standardization, as is evidenced by the widespread adoption of the Advanced Trauma Life Support approach. The challenge for an individual institution is how does one educate and promulgate these standardized processes widely and efficiently? In today's world, digital health technology must be considered in the process. The aim of this study was to describe the process of developing an app, which includes standardized trauma algorithms. The objective of the app was to allow easy, real-time access to trauma algorithms, and therefore reduce omissions/errors. A set of trauma algorithms, relevant to the local setting, was derived from the best available evidence. After obtaining grant funding, a collaborative endeavour was undertaken with an external specialist app developing company. The process required 6 months to translate the existing trauma algorithms into an app. The app contains 32 separate trauma algorithms, formatted as a single-page flow diagram. It utilizes specific smartphone features such as 'pinch to zoom', jump-words and pop-ups to allow rapid access to the desired information. Improvements in trauma care outcomes result from reducing variation. By incorporating digital health technology, a trauma app has been developed, allowing easy and intuitive access to evidenced-based algorithms. © 2015 Royal Australasian College of Surgeons.

A Guide for Developing Standard Operating Job Procedures for the Screening & Grinding Process Wastewater Treatment Facility. SOJP No. 1.

ERIC Educational Resources Information Center

Deal, Gerald A.; Montgomery, James A.

This guide describes standard operating job procedures for the screening and grinding process of wastewater treatment facilities. The objective of this process is the removal of coarse materials from the raw waste stream for the protection of subsequent equipment and processes. The guide gives step-by-step instructions for safety inspection,…

A Guide for Developing Standard Operating Job Procedures for the Sludge Thickening Process Wastewater Treatment Facility. SOJP No. 9.

ERIC Educational Resources Information Center

Schwing, Carl M.

This guide describes standard operating job procedures for the screening and grinding process of wastewater treatment facilities. The objective of this process is the removal of coarse materials from the raw waste stream for the protection of subsequent equipment and processes. The guide gives step-by-step instructions for safety inspection,…

[Indicators monitoring the process of specialized nutritional support. Grupo de Nutrición de la SEFH].

PubMed

Sirvent, Mariola; Victoria Calvo, María; Sagalés, María; Rodríguez-Penin, Isaura; Cervera, Mercedes; Piñeiro, Guadalupe; García-Rodicio, Sonsoles; Gomis, Pilar; Caba, Isabel; Vazquez, Amparo; Gomez, María E; Pedraza, Luis

2013-01-01

To identify and develop monitoring indicators of the process of specialized nutritional support that will allow measuring the level of adherence to the established practice standards. Those practice standards considered to be key elements of the process were selected to develop performance indicators. The construction of these indicators combined the scientific evidence with expert opinion. Key goals were identified within each standard provided that its consecution would allow increasing the achievement of the standard. Particular improvement initiatives associated to each key goal were generated. Lastly, monitoring indicators were defined allowing undertaking a follow-up of the implementation of the improvement initiatives or either to assess the level of achievement of the key goals identified. Nineteen practice standards were selected representative of the critical points of the process. The strategic map for each standard has been defined, with the identification of 43 key goals. In order to achieve these key goals, a portfolio of improvements has been generated comprising 56 actions. Finally, 44 monitoring indicators have been defined grouped into three categories: 1. Numeric: they assess the level of goal achievement; 2. Dichotomic (yes/no): they inform on the execution of the improvement actions; 3. Results of the practice audits. We have made available monitoring indicators that allow assessing the level of adherence to the practice standards of the process of specialized nutritional support and the impact of the implementation of improvement actions within this process. Copyright © 2013 SEFH. Published by AULA MEDICA. All rights reserved.

Exploring the New Standards

ERIC Educational Resources Information Center

Willard, Ted; Pratt, Harold; Workosky, Cindy

2012-01-01

This is an exciting time to be in science education. New science standards are being developed by a group of science educators from across the country, working with 26 states in a process managed by Achieve, Inc., a non-profit education reform organization. The development of the "Next Generation Science Standards" (NGSS) promises to be the most…

Background to the development process, Automated Residential Energy Standard (ARES) in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report documents the development and testing of a set of recommendations generated to serve as a primary basis for the Congressionally-mandated residential standard. This report treats only the residential building recommendations.

A Study on the Development of Service Quality Index for Incheon International Airport

NASA Technical Reports Server (NTRS)

Lee, Kang Seok; Lee, Seung Chang; Hong, Soon Kil

2003-01-01

The main purpose of this study is located at developing Ominibus Monitors System(OMS) for internal management, which will enable to establish standards, finding out matters to be improved, and appreciation for its treatment in a systematic way. It is through developing subjective or objective estimation tool with use importance, perceived level, and complex index at international airport by each principal service items. The direction of this study came towards for the purpose of developing a metric analysis tool, utilizing the Quantitative Second Data, Analysing Perceived Data through airport user surveys, systemizing the data collection-input-analysis process, making data image according to graph of results, planning Service Encounter and endowing control attribution, and ensuring competitiveness at the minimal international standards. It is much important to set up a pre-investigation plan on the base of existent foreign literature and actual inspection to international airport. Two tasks have been executed together on the base of this pre-investigation; one is developing subjective estimation standards for departing party, entering party, and airport residence and the other is developing objective standards as complementary methods. The study has processed for the purpose of monitoring services at airports regularly and irregularly through developing software system for operating standards after ensuring credibility and feasibility of estimation standards with substantial and statistical way.

Reducing Content Variance and Improving Student Learning Outcomes: The Value of Standardization in a Multisection Course

ERIC Educational Resources Information Center

Meuter, Matthew L.; Chapman, Kenneth J.; Toy, Daniel; Wright, Lauren K.; McGowan, William

2009-01-01

This article describes a standardization process for an introductory marketing course with multiple sections. The authors first outline the process used to develop a standardized set of marketing concepts to be used in all introductory marketing classes. They then discuss the benefits to both students and faculty that occur as a result of…

Integrated flexible manufacturing program for manufacturing automation and rapid prototyping

NASA Technical Reports Server (NTRS)

Brooks, S. L.; Brown, C. W.; King, M. S.; Simons, W. R.; Zimmerman, J. J.

1993-01-01

The Kansas City Division of Allied Signal Inc., as part of the Integrated Flexible Manufacturing Program (IFMP), is developing an integrated manufacturing environment. Several systems are being developed to produce standards and automation tools for specific activities within the manufacturing environment. The Advanced Manufacturing Development System (AMDS) is concentrating on information standards (STEP) and product data transfer; the Expert Cut Planner system (XCUT) is concentrating on machining operation process planning standards and automation capabilities; the Advanced Numerical Control system (ANC) is concentrating on NC data preparation standards and NC data generation tools; the Inspection Planning and Programming Expert system (IPPEX) is concentrating on inspection process planning, coordinate measuring machine (CMM) inspection standards and CMM part program generation tools; and the Intelligent Scheduling and Planning System (ISAPS) is concentrating on planning and scheduling tools for a flexible manufacturing system environment. All of these projects are working together to address information exchange, standardization, and information sharing to support rapid prototyping in a Flexible Manufacturing System (FMS) environment.

45 CFR 162.910 - Maintenance of standards and adoption of modifications and new standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS General Provisions for... developed through a process that provides for the following: (1) Open public access. (2) Coordination with...

45 CFR 162.910 - Maintenance of standards and adoption of modifications and new standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS ADMINISTRATIVE REQUIREMENTS General Provisions for... developed through a process that provides for the following: (1) Open public access. (2) Coordination with...

Equipment Standards: History, Litigation, and Advice

PubMed Central

Hedley-Whyte, John; Milamed, Debra R.

1999-01-01

Summary The authors present a concise history of the development of national and international standards for surgical equipment. Standards-writing organizations, surgical and other specialty societies, universities, test houses, and the U.S. government have influenced this process, which is now manifested in complex interactions between national and international standards-writing organizations, and in CE (Conformité Europeene) marks being placed on surgical equipment in the United States and elsewhere. The history of litigation in standards development is also reviewed. Recommendations to maximize patient safety and to help ensure successful, cost-effective defense in litigation for surgeons who use equipment and may suffer its malfunctions are given. Overall, the complicated oversight of surgical equipment standards and the approval process appears to be contributing to the improving and outstanding results of U.S. surgery reported by the U.S. government. PMID:10400045

Specifications of Standards in Systems and Synthetic Biology.

PubMed

Schreiber, Falk; Bader, Gary D; Golebiewski, Martin; Hucka, Michael; Kormeier, Benjamin; Le Novère, Nicolas; Myers, Chris; Nickerson, David; Sommer, Björn; Waltemath, Dagmar; Weise, Stephan

2015-09-04

Standards shape our everyday life. From nuts and bolts to electronic devices and technological processes, standardised products and processes are all around us. Standards have technological and economic benefits, such as making information exchange, production, and services more efficient. However, novel, innovative areas often either lack proper standards, or documents about standards in these areas are not available from a centralised platform or formal body (such as the International Standardisation Organisation). Systems and synthetic biology is a relatively novel area, and it is only in the last decade that the standardisation of data, information, and models related to systems and synthetic biology has become a community-wide effort. Several open standards have been established and are under continuous development as a community initiative. COMBINE, the ‘COmputational Modeling in BIology’ NEtwork has been established as an umbrella initiative to coordinate and promote the development of the various community standards and formats for computational models. There are yearly two meeting, HARMONY (Hackathons on Resources for Modeling in Biology), Hackathon-type meetings with a focus on development of the support for standards, and COMBINE forums, workshop-style events with oral presentations, discussion, poster, and breakout sessions for further developing the standards. For more information see http://co.mbine.org/. So far the different standards were published and made accessible through the standards’ web- pages or preprint services. The aim of this special issue is to provide a single, easily accessible and citable platform for the publication of standards in systems and synthetic biology. This special issue is intended to serve as a central access point to standards and related initiatives in systems and synthetic biology, it will be published annually to provide an opportunity for standard development groups to communicate updated specifications.

A Guide for Developing Standard Operating Job Procedures for the Primary Sedimentation Process Wastewater Treatment Facility. SOJP No. 4.

ERIC Educational Resources Information Center

Charles County Community Coll., La Plata, MD.

This guide describes standard operating job procedures for the primary sedimentation process of wastewater treatment plants. The primary sedimentation process involves removing settleable and suspended solids, in part, from wastewater by gravitational forces, and scum and other floatable solids from wastewater by mechanical means. Step-by-step…

California residential energy standards: problems and recommendations relating to implementation, enforcement, and design. [Thermal insulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-08-01

Documents relevant to the development and implementation of the California energy insulation standards for new residential buildings were evaluated and a survey was conducted to determine problems encountered in the implementation, enforcement, and design aspects of the standards. The impact of the standards on enforcement agencies, designers, builders and developers, manufacturers and suppliers, consumers, and the building process in general is summarized. The impact on construction costs and energy savings varies considerably because of the wide variation in prior insulation practices and climatic conditions in California. The report concludes with a series of recommendations covering all levels of government andmore » the building process. (MCW)« less

Use of Statechart Assertions for Modeling Human-in-the-Loop Security Analysis and Decision-Making Processes

DTIC Science & Technology

2012-06-01

THIS PAGE INTENTIONALLY LEFT BLANK xv LIST OF ACRONYMS AND ABBREVIATIONS BPM Business Process Model BPMN Business Process Modeling Notation C&A...checking leads to an improvement in the quality and success of enterprise software development. Business Process Modeling Notation ( BPMN ) is an...emerging standard that allows business processes to be captured in a standardized format. BPMN lacks formal semantics which leaves many of its features

Development of Standards in Vocational Education and Training: Specification, Experience, Examples, July 1999 (Reprinted with Updates 2000). Manual. Volume 2. Qualifications and Training Methods.

ERIC Educational Resources Information Center

Laur-Ernst, Ute; Kunzmann, Margaret; Hoene, Bernd

An extension of the 1999 Manual, "Development of Standards in Vocational Education and Training," this second volume presents the key terms and attitudes, reports on experience and knowledge in standards development collected in recent years on the basis of questions raised during the process, and suggests how to deal with the problems…

Summative and Formative Evaluations, National Skill Standards Project. Prepared for the National Grocers Association.

ERIC Educational Resources Information Center

Hamm, Michael S.

In 1993-1996, the Grocers Research and Educational Foundation of the National Grocers Association developed entry-level skill standards for the food marketing industry. A coalition formed early in the project directed the skill standard development process and solicited input from major organizations involved in the industry. The validity of the…

An Examination of the Statistical Problem-Solving Process as a Potential Means for Developing an Understanding of Argumentation

ERIC Educational Resources Information Center

Smith Baum, Brittany Deshae

2017-01-01

As part of the recent history of the mathematics curriculum, reasoning and argument have been emphasized throughout mathematics curriculum standards. Specifically, as part of the Common Core State Standards for Mathematics, the Standards for Mathematical Practice were presented, which included the expectation that students develop arguments and…

The Development and Structure of Professional Examinations Planned for National Use.

ERIC Educational Resources Information Center

Hecht, James T.

The process typically employed by testing services in developing professional tests for national use is described: (1) determination of professional standards; (2) development of test specifications; (3) test construction; (4) test registration and administration; and (5) scoring, analysis, and reporting. To determine professional standards, input…

Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

Neglecting the Importance of the Decision Making and Care Regimes of Personal Support Workers: A Critique of Standardization of Care Planning through the RAI/MDS

ERIC Educational Resources Information Center

Kontos, Pia C.; Miller, Karen-Lee; Mitchell, Gail J.

2010-01-01

Purpose: The Resident Assessment Instrument-Minimum Data Set (RAI/MDS) is an interdisciplinary standardized process that informs care plan development in nursing homes. This standardized process has failed to consistently result in individualized care planning, which may suggest problems with content and planning integrity. We examined the…

Standardization and quality management in next-generation sequencing.

PubMed

Endrullat, Christoph; Glökler, Jörn; Franke, Philipp; Frohme, Marcus

2016-09-01

DNA sequencing continues to evolve quickly even after > 30 years. Many new platforms suddenly appeared and former established systems have vanished in almost the same manner. Since establishment of next-generation sequencing devices, this progress gains momentum due to the continually growing demand for higher throughput, lower costs and better quality of data. In consequence of this rapid development, standardized procedures and data formats as well as comprehensive quality management considerations are still scarce. Here, we listed and summarized current standardization efforts and quality management initiatives from companies, organizations and societies in form of published studies and ongoing projects. These comprise on the one hand quality documentation issues like technical notes, accreditation checklists and guidelines for validation of sequencing workflows. On the other hand, general standard proposals and quality metrics are developed and applied to the sequencing workflow steps with the main focus on upstream processes. Finally, certain standard developments for downstream pipeline data handling, processing and storage are discussed in brief. These standardization approaches represent a first basis for continuing work in order to prospectively implement next-generation sequencing in important areas such as clinical diagnostics, where reliable results and fast processing is crucial. Additionally, these efforts will exert a decisive influence on traceability and reproducibility of sequence data.

Data Processing System (DPS) software with experimental design, statistical analysis and data mining developed for use in entomological research.

PubMed

Tang, Qi-Yi; Zhang, Chuan-Xi

2013-04-01

A comprehensive but simple-to-use software package called DPS (Data Processing System) has been developed to execute a range of standard numerical analyses and operations used in experimental design, statistics and data mining. This program runs on standard Windows computers. Many of the functions are specific to entomological and other biological research and are not found in standard statistical software. This paper presents applications of DPS to experimental design, statistical analysis and data mining in entomology. © 2012 The Authors Insect Science © 2012 Institute of Zoology, Chinese Academy of Sciences.

Architecture for Survivable Systems Processing (ASSP). Technology benefits for Open System Interconnects

NASA Technical Reports Server (NTRS)

Wood, Richard J.

1992-01-01

The Architecture for Survivable Systems Processing (ASSP) program is a two phase program whose objective is the derivation, specification, development and validation of an open system architecture capable of supporting advanced processing needs of space, ground, and launch vehicle operations. The output of the first phase is a set of hardware and software standards and specifications defining this architecture at three levels. The second phase will validate these standards and develop the technology necessary to achieve strategic hardness, packaging density, throughput requirements, and interoperability/interchangeability.

SU-B-213-02: Development of CAMPEP Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beckham, W.

2015-06-15

The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization.more » In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP.« less

SU-B-213-05: Development of ABR Certification Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seibert, J.

2015-06-15

The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization.more » In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP.« less

Silicon solar cell process. Development, fabrication and analysis

NASA Technical Reports Server (NTRS)

Yoo, H. I.; Iles, P. A.; Tanner, D. P.

1978-01-01

Solar cells were fabricated from unconventional silicon sheets, and the performances were characterized with an emphasis on statistical evaluation. A number of solar cell fabrication processes were used and conversion efficiency was measured under AMO condition at 25 C. Silso solar cells using standard processing showed an average efficiency of about 9.6%. Solar cells with back surface field process showed about the same efficiency as the cells from standard process. Solar cells from grain boundary passivation process did not show any improvements in solar cell performance.

Vacuum Processing Technique for Development of Primary Standard Blackbodies

PubMed Central

Navarro, M.; Bruce, S. S.; Johnson, B. Carol; Murthy, A. V.; Saunders, R. D.

1999-01-01

Blackbody sources with nearly unity emittance that are in equilibrium with a pure freezing metal such as gold, silver, or copper are used as primary standard sources in the International Temperature Scale of 1990 (ITS-90). Recently, a facility using radio-frequency induction heating for melting and filling the blackbody crucible with the freeze metal under vacuum conditions was developed at the National Institute of Standards and Technology (NIST). The blackbody development under a vacuum environment eliminated the possibility of contamination of the freeze metal during the process. The induction heating, compared to a resistively heated convection oven, provided faster heating of crucible and resulted in shorter turn-around time of about 7 h to manufacture a blackbody. This paper describes the new facility and its application to the development of fixed-point blackbodies.

A Guide for Developing Standard Operating Job Procedures for the Digestion Process Wastewater Treatment Facility. SOJP No. 10.

ERIC Educational Resources Information Center

Schwing, Carl M.

This guide describes standard operating job procedures for the digestion process of wastewater treatment facilities. This process is for reducing the volume of sludge to be treated in subsequent units and to reduce the volatile content of sludge. The guide gives step-by-step instructions for pre-startup, startup, continuous operating, shutdown,…

A Guide for Developing Standard Operating Job Procedures for the Grit Removal Process Wastewater Treatment Facility. SOJP No. 2.

ERIC Educational Resources Information Center

Deal, Gerald A.; Montgomery, James A.

This guide describes standard operating job procedures for the grit removal process of wastewater treatment plants. Step-by-step instructions are given for pre-start up inspection, start-up, continuous operation, and shut-down procedures. A description of the equipment used in the process is given. Some theoretical material is presented. (BB)

A Guide for Developing Standard Operating Job Procedures for the Tertiary Multimedia Filtration Process Wastewater Treatment Facility. SOJP No. 7.

ERIC Educational Resources Information Center

Petrasek, Al, Jr.

This guide describes the standard operating job procedures for the tertiary multimedia filtration process of wastewater treatment plants. The major objective of the filtration process is the removal of suspended solids from the reclaimed wastewater. The guide gives step-by-step instructions for pre-start up, start-up, continuous operation, and…

Approach for Configuring a Standardized Vessel for Processing Radioactive Waste Slurries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bamberger, Judith A.; Enderlin, Carl W.; Minette, Michael J.

2015-09-10

A standardized vessel design is being considered at the Waste Treatment and Immobilization Plant (WTP) that is under construction at Hanford, Washington. The standardized vessel design will be used for storing, blending, and chemical processing of slurries that exhibit a variable process feed including Newtonian to non-Newtonian rheologies over a range of solids loadings. Developing a standardized vessel is advantageous and reduces the testing required to evaluate the performance of the design. The objectives of this paper are to: 1) present a design strategy for developing a standard vessel mixing system design for the pretreatment portion of the waste treatmentmore » plant that must process rheologically and physically challenging process streams, 2) identify performance criteria that the design for the standard vessel must satisfy, 3) present parameters that are to be used for assessing the performance criteria, and 4) describe operation of the selected technology. Vessel design performance will be assessed for both Newtonian and non-Newtonian simulants which represent a range of waste types expected during operation. Desired conditions for the vessel operations are the ability to shear the slurry so that flammable gas does not accumulate within the vessel, that settled solids will be mobilized, that contents can be blended, and that contents can be transferred from the vessel. A strategy is presented for adjusting the vessel configuration to ensure that all these conditions are met.« less

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH).

PubMed

García-Rojo, Marcial; Gonçalves, Luís; Blobel, Bernd

2012-01-01

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH) is a European COST Action that has been running from 2007 to 2011. COST Actions are funded by the COST (European Cooperation in the field of Scientific and Technical Research) Agency, supported by the Seventh Framework Programme for Research and Technological Development (FP7), of the European Union. EURO-TELEPATH's main objectives were evaluating and validating the common technological framework and communication standards required to access, transmit and manage digital medical records by pathologists and other medical professionals in a networked environment. The project was organized in four working groups. orking Group 1 "Business modeling in pathology" has designed main pathology processes - Frozen Study, Formalin Fixed Specimen Study, Telepathology, Cytology, and Autopsy -using Business Process Modeling Notation (BPMN). orking Group 2 "Informatics standards in pathology" has been dedicated to promoting the development and application of informatics standards in pathology, collaborating with Integrating the Healthcare Enterprise (IHE), Digital Imaging and Communications in Medicine (DICOM), Health Level Seven (HL7), and other standardization bodies. Working Group 3 "Images: Analysis, Processing, Retrieval and Management" worked on the use of virtual or digital slides that are fostering the use of image processing and analysis in pathology not only for research purposes, but also in daily practice. Working Group 4 "Technology and Automation in Pathology" was focused on studying the adequacy of current existing technical solutions, including, e.g., the quality of images obtained by slide scanners, or the efficiency of image analysis applications. Major outcome of this action are the collaboration with international health informatics standardization bodies to foster the development of standards for digital pathology, offering a new approach for workflow analysis, based in business process modeling. Health terminology standardization research has become a topic of high interest. Future research work should focus on standardization of automatic image analysis and tissue microarrays imaging.

National standards in science education: Teacher perceptions regarding utilization

NASA Astrophysics Data System (ADS)

Fletcher, Carol Louise Parsons

The purpose of this naturalistic study was to determine what factors most influence middle school science teachers' intentions to utilize or ignore national standards, as a toot for reform in their classrooms, schools, or districts. Results indicate. that teachers with. minimal training were unlikely to use national standards documents due to their perceptions of a lack of support from peers, administrators and a high-stakes state accountability system. Teachers with more extensive training were more inclined to use national standards documents as philosophical guides for reform because they believed in the validity of the recommendations. Implications are discussed, chief among them that short-term professional development may actually do more harm than good if teachers retain or develop unexamined misconceptions about national standards recommendations as a result. In addition, due to the concerns expressed by teachers regarding state curriculum mandates and standardized testing, this study indicates that changes in these external factors must be instituted before teachers will commit themselves to standards-based reforms. It is suggested that staff development focus on opportunities for reflection and application which will promote conceptual change in teachers. A model predicated on the notion that the process of implementing reform is essentially an issue of promoting conceptual change in teachers is proposed. This model, termed the Reform Implementation as Conceptual Change, or RICC, focuses specifically on the cognitive processes teachers may go through when they are exposed to an innovation such as national standards. Stages such as integrated application, accommodation, assimilation, disconnection, and false accommodation, are described. The impact that professional development and training may have on the likelihood that teachers will experience these various stages is also discussed. This model serves as a theoretical framework for explaining why some teachers are unlikely to embrace national standards while others choose to utilize them as a tool for reforming science education in their classrooms, schools, or districts. As such, it can be used by reformers to design and diagnostically evaluate the implementation process and its related staff development.

The Future of Geospatial Standards

NASA Astrophysics Data System (ADS)

Bermudez, L. E.; Simonis, I.

2016-12-01

The OGC is an international not-for-profit standards development organization (SDO) committed to making quality standards for the geospatial community. A community of more than 500 member organizations with more than 6,000 people registered at the OGC communication platform drives the development of standards that are freely available for anyone to use and to improve sharing of the world's geospatial data. OGC standards are applied in a variety of application domains including Environment, Defense and Intelligence, Smart Cities, Aviation, Disaster Management, Agriculture, Business Development and Decision Support, and Meteorology. Profiles help to apply information models to different communities, thus adapting to particular needs of that community while ensuring interoperability by using common base models and appropriate support services. Other standards address orthogonal aspects such as handling of Big Data, Crowd-sourced information, Geosemantics, or container for offline data usage. Like most SDOs, the OGC develops and maintains standards through a formal consensus process under the OGC Standards Program (OGC-SP) wherein requirements and use cases are discussed in forums generally open to the public (Domain Working Groups, or DWGs), and Standards Working Groups (SWGs) are established to create standards. However, OGC is unique among SDOs in that it also operates the OGC Interoperability Program (OGC-IP) to provide real-world testing of existing and proposed standards. The OGC-IP is considered the experimental playground, where new technologies are researched and developed in a user-driven process. Its goal is to prototype, test, demonstrate, and promote OGC Standards in a structured environment. Results from the OGC-IP often become requirements for new OGC standards or identify deficiencies in existing OGC standards that can be addressed. This presentation will provide an analysis of the work advanced in the OGC consortium including standards and testbeds, where we can extract a trend for the future of geospatial standards. We see a number of key elements in focus, but simultaneously a broadening of standards to address particular communities' needs.

Arizona Academic Content Standards Social Studies Articulated by Grade Level

ERIC Educational Resources Information Center

Arizona Department of Education, 2005

2005-01-01

The state Board of Education began the development process for the Arizona academic standards in 1996 to define what Arizona students need to know and be able to do by the end of twelfth grade. The Social Studies Standards were adopted in 2000 and partially revised in 2003. Developed by committees comprised of educators, subject matter experts,…

Moderation of Assessment: An Introduction for National Standards Bodies. Developing a Qualifications Framework for New Zealand.

ERIC Educational Resources Information Center

New Zealand Qualifications Authority, Wellington.

This document provides a decision tree to guide the thinking of the staff of New Zealand agencies developing national education and certification standards. It is intended to help them make decisions about moderation of assessment--a process of sampling assessments to ensure that they are consistent with the required standard. After an…

Langley Wind Tunnel Data Quality Assurance-Check Standard Results

NASA Technical Reports Server (NTRS)

Hemsch, Michael J.; Grubb, John P.; Krieger, William B.; Cler, Daniel L.

2000-01-01

A framework for statistical evaluation, control and improvement of wind funnel measurement processes is presented The methodology is adapted from elements of the Measurement Assurance Plans developed by the National Bureau of Standards (now the National Institute of Standards and Technology) for standards and calibration laboratories. The present methodology is based on the notions of statistical quality control (SQC) together with check standard testing and a small number of customer repeat-run sets. The results of check standard and customer repeat-run -sets are analyzed using the statistical control chart-methods of Walter A. Shewhart long familiar to the SQC community. Control chart results are presented for. various measurement processes in five facilities at Langley Research Center. The processes include test section calibration, force and moment measurements with a balance, and instrument calibration.

To recognize the use of international standards for making harmonized regulation of medical devices in Asia-pacific.

PubMed

Anand, K; Saini, Ks; Chopra, Y; Binod, Sk

2010-07-01

'Medical Devices' include everything from highly sophisticated, computerized, medical equipment, right down to simple wooden tongue depressors. Regulations embody the public expectations for how buildings and facilities are expected to perform and as such represent public policy. Regulators, who develop and enforce regulations, are empowered to act in the public's interest to set this policy and are ultimately responsible to the public in this regard. Standardization contributes to the basic infrastructure that underpins society including health and environment, while promoting sustainability and good regulatory practice. The international organizations that produce International Standards are the International Electrotechnical Commission (IEC), the International Organization for Standardization (ISO), and the International Telecommunication Union (ITU). With the increasing globalization of markets, International Standards (as opposed to regional or national standards) have become critical to the trading process, ensuring a level playing field for exports, and ensuring that imports meet the internationally recognized levels of performance and safety. The development of standards is done in response to sectors and stakeholders that express a clearly established need for them. An industry sector or other stakeholder group typically communicates its requirement for standards to one of the national members. To be accepted for development, a proposed work item must receive a majority support of the participating members, who verify the global relevance of the proposed item. The regulatory authority (RA) should provide a method for the recognition of international voluntary standards and for public notification of such recognition. The process of recognition may vary from country to country. Recognition may occur by periodic publication of lists of standards that a regulatory authority has found will meet the Essential Principles. In conclusion, International standards, such as, basic standards, group standards, and product standards, are a tool for harmonizing regulatory processes, to assure the safety, quality, and performance of medical devices. Standards represent the opinion of experts from all interested parties, including industry, regulators, users, and others.

EPA Region 7 and Four States Water Quality Standards Review Process Kaizen Event Case Study

EPA Pesticide Factsheets

In June, 2007, participants from EPA headquarters, EPA Region 7, and the four States in EPA Region 7 (IA, KS, MO, and NE) conducted a Lean business kaizen event on the EPA–State process for developing and revising water quality standards (WQS).

Setting Proficiency Standards for School Leadership Assessment: An Examination of Cut Score Decision Making

ERIC Educational Resources Information Center

Cravens, Xiu Chen; Goldring, Ellen B.; Porter, Andrew C.; Polikoff, Morgan S.; Murphy, Joseph; Elliott, Stephen N.

2013-01-01

Purpose: Performance evaluation informs professional development and helps school personnel improve student learning. Although psychometric literature indicates that a rational, sound, and coherent standard-setting process adds to the credibility of an assessment, few studies have empirically examined the decision-making process. This article…

The process of moving from a regionally based cervical cytology biobank to a national infrastructure.

PubMed

Perskvist, Nasrin; Norlin, Loreana; Dillner, Joakim

2015-04-01

This article addresses the important issue of the standardization of the biobank process. It reports on i) the implementation of standard operating procedures for the processing of liquid-based cervical cells, ii) the standardization of storage conditions, and iii) the ultimate establishment of nationwide standardized biorepositories for cervical specimens. Given the differences in the infrastructure and healthcare systems of various county councils in Sweden, these efforts were designed to develop standardized methods of biobanking across the nation. The standardization of cervical sample processing and biobanking is an important and widely acknowledged issue. Efforts to address these concerns will facilitate better patient care and improve research based on retrospective and prospective collections of patient samples and cohorts. The successful nationalization of the Cervical Cytology Biobank in Sweden is based on three vital issues: i) the flexibility of the system to adapt to other regional systems, ii) the development of the system based on national collaboration between the university and the county councils, and iii) stable governmental financing by the provider, the Biobanking and Molecular Resource Infrastructure of Sweden (BBMRI.se). We will share our experiences with biorepository communities to promote understanding of and advances in opportunities to establish a nationalized biobank which covers the healthcare of the entire nation.

Grounding our practice in nursing professional development.

PubMed

Dickerson, Pamela S

2014-07-01

The Nursing Professional Development: Scope and Standards of Practice is foundational to the work of nurses in a continuing professional development role. Use of the practice and professional performance aspects of the standards supports both quality of learning activities and the continuous growth process of nurses engaged in this area of practice. Copyright 2014, SLACK Incorporated.

Application of LC/MS/MS Techniques to Development of US EPA Standardized Methods for Chemicals of Emerging Concern

EPA Science Inventory

This presentation will describe the U.S. EPA’s drinking water and ambient water method development program in relation to the process employed and the typical challenges encountered in developing standardized LC/MS/MS methods for chemicals of emerging concern. The EPA&rsquo...

Screening Methodologies to Support Risk and Technology ...

EPA Pesticide Factsheets

The Clean Air Act establishes a two-stage regulatory process for addressing emissions of hazardous air pollutants (HAPs) from stationary sources. In the first stage, the Act requires the EPA to develop technology-based standards for categories of industrial sources. We have largely completed the required “Maximum Achievable Control Technology” (MACT) standards. In the second stage of the regulatory process, EPA must review each MACT standard at least every eight years and revise them as necessary, “taking into account developments in practices, processes and control technologies.” We call this requirement the “technology review.” EPA is also required to complete a one-time assessment of the health and environmental risks that remain after sources come into compliance with MACT. This residual risk review also must be done within 8 years of setting the initial MACT standard. If additional risk reductions are necessary to protect public health with an ample margin of safety or to prevent adverse environmental effects, EPA must develop standards to address these remaining risks. Because the risk review is an important component of the RTR process, EPA is seeking SAB input on the scientific credibility of specific enhancements made to our risk assessment methodologies, particularly with respect to screening methodologies, since the last SAB review was completed in 2010. These enhancements to our risk methodologies are outlined in the document title

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stayner, L.T.; Meinhardt, T.; Hardin, B.

Under the Occupational Safety and Health, and Mine Safety and Health Acts, the National Institute for Occupational Safety and Health (NIOSH) is charged with development of recommended occupational safety and health standards, and with conducting research to support the development of these standards. Thus, NIOSH has been actively involved in the analysis of risk associated with occupational exposures, and in the development of research information that is critical for the risk assessment process. NIOSH research programs and other information resources relevant to the risk assessment process are described in this paper. Future needs for information resources are also discussed.

The international development of forensic science standards - A review.

PubMed

Wilson-Wilde, Linzi

2018-04-16

Standards establish specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform as intended. Standards can be used in the accreditation of forensic laboratories or facilities and in the certification of products and services. In recent years there have been various international activities aiming at developing forensic science standards and guidelines. The most significant initiative currently underway within the global forensic community is the development of International Organization for Standardization (ISO) standards. This paper reviews the main bodies working on standards for forensic science, the processes used and the implications for accreditation. This paper specifically discusses the work of ISO Technical Committee TC272, the future TC272 work program for the development of forensic science standards and associated timelines. Also discussed, are the lessons learnt to date in navigating the complex environment of multi-country stakeholder deliberations in standards development. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

Selection of reference standard during method development using the analytical hierarchy process.

PubMed

Sun, Wan-yang; Tong, Ling; Li, Dong-xiang; Huang, Jing-yi; Zhou, Shui-ping; Sun, Henry; Bi, Kai-shun

2015-03-25

Reference standard is critical for ensuring reliable and accurate method performance. One important issue is how to select the ideal one from the alternatives. Unlike the optimization of parameters, the criteria of the reference standard are always immeasurable. The aim of this paper is to recommend a quantitative approach for the selection of reference standard during method development based on the analytical hierarchy process (AHP) as a decision-making tool. Six alternative single reference standards were assessed in quantitative analysis of six phenolic acids from Salvia Miltiorrhiza and its preparations by using ultra-performance liquid chromatography. The AHP model simultaneously considered six criteria related to reference standard characteristics and method performance, containing feasibility to obtain, abundance in samples, chemical stability, accuracy, precision and robustness. The priority of each alternative was calculated using standard AHP analysis method. The results showed that protocatechuic aldehyde is the ideal reference standard, and rosmarinic acid is about 79.8% ability as the second choice. The determination results successfully verified the evaluation ability of this model. The AHP allowed us comprehensive considering the benefits and risks of the alternatives. It was an effective and practical tool for optimization of reference standards during method development. Copyright © 2015 Elsevier B.V. All rights reserved.

Approach to data exchange: the spatial data transfer standard

USGS Publications Warehouse

Rossmeissl, Hedy J.; Rugg, Robert D.

1992-01-01

Significant developments have taken place in the disciplines of cartography and geography in recent years with the advent of computer hardware and software that manipulate and process digital cartographic and geographic data more efficiently. The availability of inexpensive and powerful hardware and software systems offers the capability of displaying and analyzing spatial data to a growing number of users. As a result, developing and using existing digital cartographic databases are becoming very popular. However, the absence of uniform standards for the transfer of digital spatial data is hindering the exchange of data and increasing costs. Several agencies of the U.S. government and the academic community have been working hard over the last few years to develop a spatial data transfer standard that includes definitions of standard terminology, a spatial data transfer specification, recommendations on reporting digital cartographic data quality, and standard topographic and hydrographic entity terms and definitions. This proposed standard was published in the January 1988 issue of The American Cartographer. Efforts to test and promote this standard were coordinated by the U.S. Geological Survey. A Technical Review Board was appointed with representatives from the U.S. government, the private sector, and the academic community to complete the standard for submittal to the National Institute of Standards and Technology for approval as a Federal Information Processing Standard. The proposed standard was submitted in February 1992 for final approval.

The Federal Government and Information Technology Standards: Building the National Information Infrastructure.

ERIC Educational Resources Information Center

Radack, Shirley M.

1994-01-01

Examines the role of the National Institute of Standards and Technology (NIST) in the development of the National Information Infrastructure (NII). Highlights include the standards process; voluntary standards; Open Systems Interconnection problems; Internet Protocol Suite; consortia; government's role; and network security. (16 references) (LRW)

Standard payload computer for the international space station

NASA Astrophysics Data System (ADS)

Knott, Karl; Taylor, Chris; Koenig, Horst; Schlosstein, Uwe

1999-01-01

This paper describes the development and application of a Standard PayLoad Computer (SPLC) which is being applied by the majority of ESA payloads accommodated on the International Space Station (ISS). The strategy of adopting of a standard computer leads to a radical rethink in the payload data handling procurement process. Traditionally, this has been based on a proprietary development with repeating costs for qualification, spares, expertise and maintenance for each new payload. Implementations have also tended to be unique with very little opportunity for reuse or utilisation of previous developments. While this may to some extent have been justified for short duration one-off missions, the availability of a standard, long term space infrastructure calls for a quite different approach. To support a large number of concurrent payloads, the ISS implementation relies heavily on standardisation, and this is particularly true in the area of payloads. Physical accommodation, data interfaces, protocols, component quality, operational requirements and maintenance including spares provisioning must all conform to a common set of standards. The data handling system and associated computer used by each payload must also comply with these common requirements, and thus it makes little sense to instigate multiple developments for the same task. The opportunity exists to provide a single computer suitable for all payloads, but with only a one-off development and qualification cost. If this is combined with the benefits of multiple procurement, centralised spares and maintenance, there is potential for great savings to be made by all those concerned in the payload development process. In response to the above drivers, the SPLC is based on the following concepts: • A one-off development and qualification process • A modular computer, configurable according to the payload developer's needs from a list of space-qualified items • An `open system' which may be added to by payload developers • Core software providing a suite of common communications services including a verified protocol implementation required to communicate with the ISS • A standardized ground support equipment and accompanying software development environment • The use of commercial hardware and software standards and products.

An assessment of space shuttle flight software development processes

NASA Technical Reports Server (NTRS)

1993-01-01

In early 1991, the National Aeronautics and Space Administration's (NASA's) Office of Space Flight commissioned the Aeronautics and Space Engineering Board (ASEB) of the National Research Council (NRC) to investigate the adequacy of the current process by which NASA develops and verifies changes and updates to the Space Shuttle flight software. The Committee for Review of Oversight Mechanisms for Space Shuttle Flight Software Processes was convened in Jan. 1992 to accomplish the following tasks: (1) review the entire flight software development process from the initial requirements definition phase to final implementation, including object code build and final machine loading; (2) review and critique NASA's independent verification and validation process and mechanisms, including NASA's established software development and testing standards; (3) determine the acceptability and adequacy of the complete flight software development process, including the embedded validation and verification processes through comparison with (1) generally accepted industry practices, and (2) generally accepted Department of Defense and/or other government practices (comparing NASA's program with organizations and projects having similar volumes of software development, software maturity, complexity, criticality, lines of code, and national standards); (4) consider whether independent verification and validation should continue. An overview of the study, independent verification and validation of critical software, and the Space Shuttle flight software development process are addressed. Findings and recommendations are presented.

An empirical evaluation of software quality assurance practices and challenges in a developing country: a comparison of Nigeria and Turkey.

PubMed

Sowunmi, Olaperi Yeside; Misra, Sanjay; Fernandez-Sanz, Luis; Crawford, Broderick; Soto, Ricardo

2016-01-01

The importance of quality assurance in the software development process cannot be overemphasized because its adoption results in high reliability and easy maintenance of the software system and other software products. Software quality assurance includes different activities such as quality control, quality management, quality standards, quality planning, process standardization and improvement amongst others. The aim of this work is to further investigate the software quality assurance practices of practitioners in Nigeria. While our previous work covered areas on quality planning, adherence to standardized processes and the inherent challenges, this work has been extended to include quality control, software process improvement and international quality standard organization membership. It also makes comparison based on a similar study carried out in Turkey. The goal is to generate more robust findings that can properly support decision making by the software community. The qualitative research approach, specifically, the use of questionnaire research instruments was applied to acquire data from software practitioners. In addition to the previous results, it was observed that quality assurance practices are quite neglected and this can be the cause of low patronage. Moreover, software practitioners are neither aware of international standards organizations or the required process improvement techniques; as such their claimed standards are not aligned to those of accredited bodies, and are only limited to their local experience and knowledge, which makes it questionable. The comparison with Turkey also yielded similar findings, making the results typical of developing countries. The research instrument used was tested for internal consistency using the Cronbach's alpha, and it was proved reliable. For the software industry in developing countries to grow strong and be a viable source of external revenue, software assurance practices have to be taken seriously because its effect is evident in the final product. Moreover, quality frameworks and tools which require minimum time and cost are highly needed in these countries.

The Missing Link--Manpower Staffing Standards and the Budget Process

DTIC Science & Technology

1986-04-01

used to- develop the combat and ,-ombat support forces dc’cumented in Tables of Organizaticn and Equipment (TOE). A MS-3 standard is essentially an...candidates for standards develo pment. Where this e., ists and where it i not ecnomically reasonable to justi fy the development effort, standards are not...sector have the special trust of the taxpayers, and, as such, must ensure that staffing cf these functions is minimum essential . The functio n of

A Guide for Developing Standard Operating Job Procedures for the Sludge Conditioning & Dewatering Process Wastewater Treatment Facility. SOJP No. 11.

ERIC Educational Resources Information Center

Schwing, Carl M.

This guide describes standard operating job procedures for the sludge conditioning and dewatering process of wastewater treatment facilities. In this process, sludge is treated with chemicals to make the sludge coagulate and give up its water more easily. The treated sludge is then dewatered using a vacuum filter. The guide gives step-by-step…

A Guide for Developing Standard Operating Job Procedures for the Pump Station Process Wastewater Treatment Facility. SOJP No. 3.

ERIC Educational Resources Information Center

Perley, Gordon F.

This is a guide for standard operating job procedures for the pump station process of wastewater treatment plants. Step-by-step instructions are given for pre-start up inspection, start-up procedures, continuous routine operation procedures, and shut-down procedures. A general description of the equipment used in the process is given. Two…

Evidence-based health care: development and audit of a clinical standard for research and its impact on an NHS trust.

PubMed

Parkin, Claire; Bullock, Ian

2005-04-01

Working within a modern National Health Service in the United Kingdom, the place for research and its dissemination is increasingly important. The organization of this within each National Health Service (NHS) Trust is challenging but nevertheless essential. If health care professionals are to be empowered to adopt an evidence-based approach in both the planning and delivery of care, research aware employees are crucial. This paper highlights the importance of NHS hospital trusts implementing initiatives that will facilitate this process. One such initiative has been the development and survey of a clinical standard for research. The primary development aim was to provide a benchmark standard for all nursing research. The standard was developed to fit within the current dynamic quality improvement (DQI) programme and has directly contributed to an evolving culture of research by shaping nurses' awareness, and offering a support and consultancy network within the Trust. The standard is one aspect of a research awareness programme, with the primary objective of providing guidance and education whilst developing nurses throughout the research process. The planned strategic outcome is to see a positive outcome on the quality of research in the Trust. A baseline survey was conducted to provide a definitive snap shot of research understanding and practice within the Trust following the introduction of the research standard. The standard was developed by a team of clinicians led by a member of the quality team, to ensure that it fitted the DQI structure, and a member of the Nursing Research Unit (NRU). The standard was distributed to every clinical area and 192 nurses were surveyed to evaluate its impact on their awareness of educational opportunities, their use of the consultancy and support service, their use of other support services, their research utilization and research quality. The survey demonstrated that the implementation of the standard had increased awareness related to both formal and informal educational and research opportunities. It identified current nurses' strengths and weaknesses relative to all aspects of the research process, particularly in obtaining ethical approval for studies. A rolling programme of research education enabled nurses to gain essential knowledge and skills in supporting their developing research awareness, consumption and conduct of research. The NRU, through this process, has formed an effective alliance between clinical nurses and research facilitators in promoting high quality research. The foundations to continue to support this within the Trust are now well established.

How Teacher Selection Practices in a High-Resource, Low-Need Suburban School District Compare with Best Practice Research: A Case Study

ERIC Educational Resources Information Center

Pease, Adam Steven

2012-01-01

The purpose of this study was to develop best practice standards for hiring public school teachers. This standard was developed from the available literature on recruiting, screening, selecting, and hiring high-quality teachers. The targeted and actual hiring processes of a case study district were compared to this teacher hiring standard.…

Specifications for a Federal Information Processing Standard Data Dictionary System

NASA Technical Reports Server (NTRS)

Goldfine, A.

1984-01-01

The development of a software specification that Federal agencies may use in evaluating and selecting data dictionary systems (DDS) is discussed. To supply the flexibility needed by widely different applications and environments in the Federal Government, the Federal Information Processing Standard (FIPS) specifies a core DDS together with an optimal set of modules. The focus and status of the development project are described. Functional specifications for the FIPS DDS are examined for the dictionary, the dictionary schema, and the dictionary processing system. The DDS user interfaces and DDS software interfaces are discussed as well as dictionary administration.

The Effect of Design Modifications to the Typographical Layout of the New York State Elementary Science Learning Standards on User Preference and Process Time

ERIC Educational Resources Information Center

Arnold, Jeffery E.

2010-01-01

The purpose of this study was to determine the effect of four different design layouts of the New York State elementary science learning standards on user processing time and preference. Three newly developed layouts contained the same information as the standards core curriculum. In this study, the layout of the core guide is referred to as Book.…

Guidelines for the Administration and Accreditation of the Standardized Craft Training Process. Sixth Edition.

ERIC Educational Resources Information Center

National Center for Construction Education and Research, Gainesville, FL.

This document contains guidelines for the administration and accreditation of the standardized craft training process that was developed by the National Center for Construction Education and Research (NCCER) in partnership with various sectors of the construction and maintenance industries. The following are among the topics discussed in Chapters…

The Craft of Benchmarking: Finding and Utilizing District-Level, Campus-Level, and Program-Level Standards.

ERIC Educational Resources Information Center

McGregor, Ellen N.; Attinasi, Louis C., Jr.

This paper describes the processes involved in selecting peer institutions for appropriate benchmarking using national databases (NCES-IPEDS). Benchmarking involves the identification of peer institutions and/or best practices in specific operational areas for the purpose of developing standards. The benchmarking process was borne in the early…

77 FR 13294 - Announcing Approval of Federal Information Processing Standard (FIPS) Publication 180-4, Secure...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-06

... hash algorithms in many computer network applications. On February 11, 2011, NIST published a notice in... Information Security Management Act (FISMA) of 2002 (Pub. L. 107-347), the Secretary of Commerce is authorized to approve Federal Information Processing Standards (FIPS). NIST activities to develop computer...

From the Analysis of Work-Processes to Designing Competence-Based Occupational Standards and Vocational Curricula

ERIC Educational Resources Information Center

Tutlys, Vidmantas; Spöttl, Georg

2017-01-01

Purpose: This paper aims to explore methodological and institutional challenges on application of the work-process analysis approach in the design and development of competence-based occupational standards for Lithuania. Design/methodology/approach: The theoretical analysis is based on the review of scientific literature and the analysis of…

Space Generic Open Avionics Architecture (SGOAA) standard specification

NASA Technical Reports Server (NTRS)

Wray, Richard B.; Stovall, John R.

1994-01-01

This standard establishes the Space Generic Open Avionics Architecture (SGOAA). The SGOAA includes a generic functional model, processing structural model, and an architecture interface model. This standard defines the requirements for applying these models to the development of spacecraft core avionics systems. The purpose of this standard is to provide an umbrella set of requirements for applying the generic architecture models to the design of a specific avionics hardware/software processing system. This standard defines a generic set of system interface points to facilitate identification of critical services and interfaces. It establishes the requirement for applying appropriate low level detailed implementation standards to those interfaces points. The generic core avionics functions and processing structural models provided herein are robustly tailorable to specific system applications and provide a platform upon which the interface model is to be applied.

Developing Carbon Nanotube Standards at NASA

NASA Technical Reports Server (NTRS)

Nikolaev, Pasha; Arepalli, Sivaram; Sosa, Edward; Gorelik, Olga; Yowell, Leonard

2007-01-01

Single wall carbon nanotubes (SWCNTs) are currently being produced and processed by several methods. Many researchers are continuously modifying existing methods and developing new methods to incorporate carbon nanotubes into other materials and utilize the phenomenal properties of SWCNTs. These applications require availability of SWCNTs with known properties and there is a need to characterize these materials in a consistent manner. In order to monitor such progress, it is critical to establish a means by which to define the quality of SWCNT material and develop characterization standards to evaluate of nanotube quality across the board. Such characterization standards should be applicable to as-produced materials as well as processed SWCNT materials. In order to address this issue, NASA Johnson Space Center has developed a protocol for purity and dispersion characterization of SWCNTs (Ref.1). The NASA JSC group is currently working with NIST, ANSI and ISO to establish purity and dispersion standards for SWCNT material. A practice guide for nanotube characterization is being developed in cooperation with NIST (Ref.2). Furthermore, work is in progress to incorporate additional characterization methods for electrical, mechanical, thermal, optical and other properties of SWCNTs.

Developing Carbon Nanotube Standards at NASA

NASA Technical Reports Server (NTRS)

Nikolaev, Pasha; Arepalli, Sivaram; Sosa, Edward; Gorelik, Olga; Yowell, Leonard

2007-01-01

Single wall carbon nanotubes (SWCNTs) are currently being produced and processed by several methods. Many researchers are continuously modifying existing methods and developing new methods to incorporate carbon nanotubes into other materials and utilize the phenomenal properties of SWCNTs. These applications require availability of SWCNTs with known properties and there is a need to characterize these materials in a consistent manner. In order to monitor such progress, it is critical to establish a means by which to define the quality of SWCNT material and develop characterization standards to evaluate of nanotube quality across the board. Such characterization standards should be applicable to as-produced materials as well as processed SWCNT materials. In order to address this issue, NASA Johnson Space Center has developed a protocol for purity and dispersion characterization of SWCNTs. The NASA JSC group is currently working with NIST, ANSI and ISO to establish purity and dispersion standards for SWCNT material. A practice guide for nanotube characterization is being developed in cooperation with NIST. Furthermore, work is in progress to incorporate additional characterization methods for electrical, mechanical, thermal, optical and other properties of SWCNTs.

Standard work for room entry: Linking lean, hand hygiene, and patient-centeredness.

PubMed

O'Reilly, Kristin; Ruokis, Samantha; Russell, Kristin; Teves, Tim; DiLibero, Justin; Yassa, David; Berry, Hannah; Howell, Michael D

2016-03-01

Healthcare-associated infections are costly and fatal. Substantial front-line, administrative, regulatory, and research efforts have focused on improving hand hygiene. While broad agreement exists that hand hygiene is the most important single approach to infection prevention, compliance with hand hygiene is typically only about 40%(1). Our aim was to develop a standard process for room entry in the intensive care unit that improved compliance with hand hygiene and allowed for maximum efficiency. We recognized that hand hygiene is a single step in a substantially more complicated process of room entry. We applied Lean engineering techniques to develop a standard process that included both physical steps and also standard communication elements from provider to patients and families and created a physical environment to support this. We observed meaningful improvement in the performance of the new standard as well as time savings for clinical providers with each room entry. We also observed an increase in room entries that included verbal communication and an explanation of what the clinician was entering the room to do. The design and implementation of a standardized room entry process and the creation of an environment that supports that new process has resulted in measurable positive outcomes on the medical intensive care unit, including quality, patient experience, efficiency, and staff satisfaction. Designing a process, rather than viewing tasks that need to happen in close proximity in time (either serially or in parallel) as unrelated, simplifies work for staff and results in higher compliance to individual tasks. Copyright © 2015 Elsevier Inc. All rights reserved.

SEL's Software Process-Improvement Program

NASA Technical Reports Server (NTRS)

Basili, Victor; Zelkowitz, Marvin; McGarry, Frank; Page, Jerry; Waligora, Sharon; Pajerski, Rose

1995-01-01

The goals and operations of the Software Engineering Laboratory (SEL) is reviewed. For nearly 20 years the SEL has worked to understand, assess, and improve software and the development process within the production environment of the Flight Dynamics Division (FDD) of NASA's Goddard Space Flight Center. The SEL was established in 1976 with the goals of reducing: (1) the defect rate of delivered software, (2) the cost of software to support flight projects, and (3) the average time to produce mission-support software. After studying over 125 projects of FDD, the results have guided the standards, management practices, technologies, and the training within the division. The results of the studies have been a 75 percent reduction in defects, a 50 percent reduction in cost, and a 25 percent reduction in development time. Over time the goals of SEL have been clarified. The goals are now stated as: (1) Understand baseline processes and product characteristics, (2) Assess improvements that have been incorporated into the development projects, (3) Package and infuse improvements into the standard SEL process. The SEL improvement goal is to demonstrate continual improvement of the software process by carrying out analysis, measurement and feedback to projects with in the FDD environment. The SEL supports the understanding of the process by study of several processes including, the effort distribution, and error detection rates. The SEL assesses and refines the processes. Once the assessment and refinement of a process is completed, the SEL packages the process by capturing the process in standards, tools and training.

Comparative Analysis of the Measurement of Total Instructional Alignment

ERIC Educational Resources Information Center

Kick, Laura C.

2013-01-01

In 2007, Lisa Carter created the Total Instructional Alignment system--a process that aligns standards, curriculum, assessment, and instruction. Employed in several hundred school systems, the TIA process is a successful professional development program. The researcher developed an instrument to measure the success of the TIA process with the…

Standards Setting and Federal Information Policy: The Escrowed Encryption Standard (EES).

ERIC Educational Resources Information Center

Gegner, Karen E.; Veeder, Stacy B.

1994-01-01

Examines the standards process used for developing the Escrowed Encryption Standard (EES) and its possible impact on national communication and information policies. Discusses the balance between national security and law enforcement concerns versus privacy rights and economic competitiveness in the area of foreign trade and export controls. (67…

CMMI (Trademark) for Development, Version 1.2

DTIC Science & Technology

2006-08-01

IEC TR 12207 Information Technology—Software Life Cycle Processes, 1995. http://www.jtc1-sc7.org. ISO 1998 International Organization for...We also consult other standards as needed, including the following: • ISO 9000 [ ISO 1987] • ISO /IEC 12207 [ ISO 1995] • ISO /IEC 15504 [ ISO 2006... ISO /IEC) body of standards. CMMs focus on improving processes in an organization. They contain the essential elements of effective processes for one

Development and inter-rater reliability of a standardized verbal instruction manual for the Chinese Geriatric Depression Scale-short form.

PubMed

Wong, M T P; Ho, T P; Ho, M Y; Yu, C S; Wong, Y H; Lee, S Y

2002-05-01

The Geriatric Depression Scale (GDS) is a common screening tool for elderly depression in Hong Kong. This study aimed at (1) developing a standardized manual for the verbal administration and scoring of the GDS-SF, and (2) comparing the inter-rater reliability between the standardized and non-standardized verbal administration of GDS-SF. Two studies were reported. In Study 1, the process of developing the manual was described. In Study 2, we compared the inter-rater reliabilities of GDS-SF scores using the standardized verbal instructions and the traditional non-standardized administration. Results of Study 2 indicated that the standardized procedure in verbal administration and scoring improved the inter-rater reliabilities of GDS-SF. Copyright 2002 John Wiley & Sons, Ltd.

Standard practices for the implementation of computer software

NASA Technical Reports Server (NTRS)

Irvine, A. P. (Editor)

1978-01-01

A standard approach to the development of computer program is provided that covers the file cycle of software development from the planning and requirements phase through the software acceptance testing phase. All documents necessary to provide the required visibility into the software life cycle process are discussed in detail.

Soil quality monitoring: Examples of existing protocols

Treesearch

Daniel G. Neary; Carl C. Trettin; Deborah Page-Dumroese

2010-01-01

Many forestry and agricultural agencies and organizations worldwide have developed soil monitoring and quality standards and guidelines to ensure future sustainability of land management. These soil monitoring standards are typically developed in response to international initiatives such as the Montreal Process, the Helsinki Ministerial Conference,or in support of...

Soil quality monitoring: examples of existing protocols

Treesearch

Daniel G. Neary; Carl C. Trettin; Deborah Page-Dumroese

2010-01-01

Many forestry and agricultural agencies and organizations worldwide have developed soil monitoring and quality standards and guidelines to ensure future sustainability of land management. These soil monitoring standards are typically developed in response to international initiatives such as the Montreal Process, the Helsinki Ministerial Conference, or in support of...

The "Test of Financial Literacy": Development and Measurement Characteristics

ERIC Educational Resources Information Center

Walstad, William B.; Rebeck, Ken

2017-01-01

The "Test of Financial Literacy" (TFL) was created to measure the financial knowledge of high school students. Its content is based on the standards and benchmarks stated in the "National Standards for Financial Literacy" (Council for Economic Education 2013). The test development process involved extensive item writing and…

Diversity of thermophilic populations during thermophilic aerobic digestion of potato peel slurry.

PubMed

Ugwuanyi, J O; Harvey, L M; McNeil, B

2008-01-01

To study the diversity of thermophiles during thermophilic aerobic digestion (TAD) of agro-food waste slurries under conditions similar to full-scale processes. Population diversity and development in TAD were studied by standard microbiological techniques and the processes monitored by standard fermentation procedures. Facultative thermophiles were identified as Bacillus coagulans and B. licheniformis, while obligate thermophiles were identified as B. stearothermophilus. They developed rapidly to peaks of 10(7) to 10(8) in

Intermountain Health Care, Inc.: Standard Costing System Methodology and Implementation

PubMed Central

Rosqvist, W.V.

1984-01-01

Intermountain Health Care, Inc. (IHC) a notfor-profit hospital chain with 22 hospitals in the intermountain area and corporate offices located in Salt Lake City, Utah, has developed a Standard Costing System to provide hospital management with a tool for confronting increased cost pressures in the health care environment. This document serves as a description of methodology used in developing the standard costing system and outlines the implementation process.

29 CFR 1956.10 - Specific criteria.

Code of Federal Regulations, 2010 CFR

2010-07-01

... develop or adopt such standards. Indices of the effectiveness of standards and procedures for the... agencies shall have the authority through appropriate legal process to compel such entry. (f) Prohibition... plan. Subject to the results of evaluations, conformity with the Standards for a Merit System of...

Health level 7 development framework for medication administration.

PubMed

Kim, Hwa Sun; Cho, Hune

2009-01-01

We propose the creation of a standard data model for medication administration activities through the development of a clinical document architecture using the Health Level 7 Development Framework process based on an object-oriented analysis and the development method of Health Level 7 Version 3. Medication administration is the most common activity performed by clinical professionals in healthcare settings. A standardized information model and structured hospital information system are necessary to achieve evidence-based clinical activities. A virtual scenario is used to demonstrate the proposed method of administering medication. We used the Health Level 7 Development Framework and other tools to create the clinical document architecture, which allowed us to illustrate each step of the Health Level 7 Development Framework in the administration of medication. We generated an information model of the medication administration process as one clinical activity. It should become a fundamental conceptual model for understanding international-standard methodology by healthcare professionals and nursing practitioners with the objective of modeling healthcare information systems.

Fidelity of test development process within a national science grant

NASA Astrophysics Data System (ADS)

Brumfield, Teresa E.

In 2002, a math-science partnership (MSP) program was initiated by a national science grant. The purpose of the MSP program was to promote the development, implementation, and sustainability of promising partnerships among institutions of higher education, K-12 schools and school systems, as well as other important stakeholders. One of the funded projects included a teacher-scientist collaborative that instituted a professional development system to prepare teachers to use inquiry-based instructional modules. The MSP program mandated evaluations of its funded projects. One of the teacher-scientist collaborative project's outcomes specifically focused on teacher and student science content and process skills. In order to provide annual evidence of progress and to measure the impact of the project's efforts, and because no appropriate science tests were available to measure improvements in content knowledge of participating teachers and their students, the project contracted for the development of science tests. This dissertation focused on the process of test development within an evaluation and examined planned (i.e., expected) and actual (i.e., observed) test development, specifically concentrating on the factors that affected the actual test development process. Planned test development was defined as the process of creating tests according to the well-established test development procedures recommended by the AERA/APA/NCME 1999 Standards for Educational and Psychological Testing. Actual test development was defined as the process of creating tests as it actually took place. Because case study provides an in-depth, longitudinal examination of an event (i.e., case) in a naturalistic setting, it was selected as the appropriate methodology to examine the difference between planned and actual test development. The case (or unit of analysis) was the test development task, a task that was bounded by the context in which it occurred---and over which this researcher had no control---and by time. The purpose for studying the case was to gain a more in-depth, holistic understanding of the real-life test development task that took place within a project evaluation context. In particular, this case study investigated how the actual test development process was affected by: (1) the national and state (i.e., NC) science standards, (2) the NSF's definition of "evidence" in a project evaluation, (3) the MSP project's understanding of the role of the to-be-developed tests in their project evaluation, (4) the MSP project's understanding of the test development process, and (5) the MSP project's participants (e.g., teacher item-writers and scientists). From an investigation of this case, it was concluded that: (a) constructing psychometrically sound tests within an evaluation is not easy, (b) sufficient time and resources to construct such measures properly are seldom provided, and (c) test construction---at least within an evaluation---is not routine and unproblematic. Based upon the results from this case study, it was recommended that stakeholders (i.e., program managers, project directors, and evaluators) be familiar with the steps and standards used to develop psychometrically sound tests. Additionally, it was recommended that, for future research, a meta-analysis that examines only the test development process be conducted of all other MSP projects. A second suggested future research area was to establish a protocol that provides a systematic means by which to examine an existing or proposed MSP project for alignment with state science standards. Such a protocol would be cost-effective in that demonstrated alignment with state science standards would enable projects to use existing state science assessments, which must be in place, according to NCLB, by the 2007-2008 school year, to demonstrate student achievement. In this way, project directors and evaluators, typically with limited familiarity with the steps and standards by which psychometrically sound assessments are created, would not be placed in the role of test developer.

Rotational Molding Process Technician. Instructional Program Package.

ERIC Educational Resources Information Center

El Paso Community Coll., TX.

This curriculum package contains materials developed through a partnership of the Association of Rotational Molders, El Paso Community College (Texas), and the College of DuPage (Illinois). The materials, which were developed during a 2-day DACUM (Developing a Curriculum) process, are based on national skill standards and designed for…

Early Learning and Development Standards in East Asia and the Pacific: Experiences from Eight Countries

ERIC Educational Resources Information Center

Miyahara, Junko; Meyers, Cliff

2008-01-01

This paper analyses how countries in UNICEF's East Asia and Pacific Region (EAPR) have engaged in the Early Learning and Development Standards (ELDS) process. ELDS has been developed by the governments of Cambodia, China, Fiji, Lao PDR, Mongolia, Philippines, Thailand, and Vietnam over the last 3 years with technical and financial support from…

NASA Operational Environment Team (NOET) - NASA's key to environmental technology

NASA Technical Reports Server (NTRS)

Cook, Beth

1993-01-01

NOET is a NASA-wide team which supports the research and development community by sharing information both in person and via a computerized network, assisting in specification and standard revisions, developing cleaner propulsion systems, and exploring environmentally compliant alternatives to current processes. NOET's structure, dissemination of materials, electronic information, EPA compliance, specifications and standards, and environmental research and development are discussed.

CMMI(Registered) for Development, Version 1.3

DTIC Science & Technology

2010-11-01

ISO /IEC 15288:2008 Systems and Software Engineering – System Life Cycle Processes [ ISO 2008b] ISO /IEC 27001 :2005 Information technology – Security...IEC 2005 International Organization for Standardization and International Electrotechnical Commission. ISO /IEC 27001 Information Technology...International Electrotechnical Commission ( ISO /IEC) body of standards. CMMs focus on improving processes in an organization. They contain the

School nurse evaluations: making the process meaningful and motivational.

PubMed

McDaniel, Kathryn H; Overman, Muriel; Guttu, Martha; Engelke, Martha Keehner

2013-02-01

The professional standards of school nursing practice provide a framework to help school nurses focus on their unique mission of promoting health and academic achievement for all students. Without the standards, the nurse's role can become task oriented and limited in scope. By using an evaluation tool that reflects the standards, nurses not only become aware and begin to understand the standards; they also become directly accountable for meeting them. In addition, developing an evaluation process based on the standards of school nurse practice increases the visibility of school nurses and helps school administrators understand the role of the school nurse. This article describes how one school district integrated the scope and standards of school nursing into the job description and performance evaluation of the nurse. The process which is used to complete the evaluation in a manner that is meaningful and motivational to the school nurse is described.

Sample and data processing considerations for the NIST quantitative infrared database

NASA Astrophysics Data System (ADS)

Chu, Pamela M.; Guenther, Franklin R.; Rhoderick, George C.; Lafferty, Walter J.; Phillips, William

1999-02-01

Fourier-transform infrared (FT-IR) spectrometry has become a useful real-time in situ analytical technique for quantitative gas phase measurements. In fact, the U.S. Environmental Protection Agency (EPA) has recently approved open-path FT-IR monitoring for the determination of hazardous air pollutants (HAP) identified in EPA's Clean Air Act of 1990. To support infrared based sensing technologies, the National Institute of Standards and Technology (NIST) is currently developing a standard quantitative spectral database of the HAPs based on gravimetrically prepared standard samples. The procedures developed to ensure the quantitative accuracy of the reference data are discussed, including sample preparation, residual sample contaminants, data processing considerations, and estimates of error.

Integrated methodology for standard-setting norms of innovative product in the new competitive environment

NASA Astrophysics Data System (ADS)

Polyakova, Marina; Rubin, Gennadiy

2017-07-01

Modern theory of technological and economical development is based on long-term cycles. So far it has been proved that the technological structure of the economy can be subdivided into groups of technological complexes, which are inter-related with each other by similar technological links, so called technological modes. Technological mode is defined as a complex of interrelated production units of similar technological level, which develop simultaneously. In order to provide competitiveness of products in the new changing conditions, it is necessary to make sure that they meet all the regulatory requirements specified in standards. But the existing and the fast changing situation on the merchandise markets causes disbalance between the growing customer requirements and the technological capabilities of the manufacturer. This makes the issue of standardization development even more urgent both from the point of view of establishing the current positions and from the point of view of possible promising development trends in technology. In the paper scientific and engineering principles of developing standardization as a science are described. It is shown that further development of standardization is based on the principles of advanced standardization the main idea of which is to set up the prospective requirements to the innovative product. Modern approaches of advanced standardization are shown in this paper. The complexity of the negotiation procedure between customer and manufacturer as a whole and achieving of consensus, in particular, make it necessary to find conceptually new approaches to developing mathematical models. The developed methodology picture the process of achieving the consensus between customer and manufacturer while developing the standard norms in the form of decreasing S-curve diagram. It means that in the end of the negotiation process, there is no difference between customer and manufacturer positions. It makes it possible to provide the basics of the assessment using the differential equation of the relationship between the rate of change of quality assessment and the distance of the estimated parameter value from the best value to the worst one. The obtained mathematical model can be used in the practice of standardization decreasing time of setting standard norms.

Automated process planning system

NASA Technical Reports Server (NTRS)

Mann, W.

1978-01-01

Program helps process engineers set up manufacturing plans for machined parts. System allows one to develop and store library of similar parts characteristics, as related to particular facility. Information is then used in interactive system to help develop manufacturing plans that meet required standards.

SU-B-213-06: Development of ABR Examination Questions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allison, J.

2015-06-15

The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization.more » In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP.« less

Management plan documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 2

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the second of five volumes of the Information System Life-Cycle and Documentation Standards. This volume provides a well-organized, easily used standard for management plans used in acquiring, assuring, and developing information systems and software, hardware, and operational procedures components, and related processes.

San Diego's Capital Planning Process

ERIC Educational Resources Information Center

Lytton, Michael

2009-01-01

This article describes San Diego's capital planning process. As part of its capital planning process, the San Diego Unified School District has developed a systematic analysis of functional quality at each of its school sites. The advantage of this approach is that it seeks to develop and apply quantifiable metrics and standards for the more…

Processes in the development of international specialist competencies and standards: the Sports Physiotherapy for All Project.

PubMed

Bulley, Catherine; Donaghy, Marie

2008-01-01

In a world of rapidly developing knowledge it is important that professions describe their roles and capabilities. The need for a thorough description of sports physiotherapy was addressed through collaboration between the International Federation of Sports Physiotherapy (IFSP) and five European higher education institutions. This resulted in the Sports Physiotherapy for All Project, which has been successful in developing internationally accepted competencies and standards for sports physiotherapists. This article describes and reflects on the process to communicate useful lessons. A competency model was chosen to facilitate differentiation and communication of aspects of sports physiotherapy practice. Documentation relating to sports physiotherapy practice was collected from 16 countries and analysed thematically. A cut and paste method was used by a panel of experts to allocate themes to areas of practice within the competency model. Theme groups were used to select areas of practice for description in competency form. Standards were derived from competencies following in depth discussion with the expert panel, and triangulation with themes derived from international documentation. A rigorous process of international review and revision led to the final list of 11 competencies and related standards, both accepted by the IFSP. This work provides a foundation for the development of an audit toolkit to guide demonstration and evaluation of competencies and standards. This provides a foundation for targeted career development activities, appropriate provision of training opportunities, and quality enhancement. The experiences gained during this project can inform other health professions and their specialisms when embarking on a similar journey.

Meeting Customer Service Standards Under Executive Order 12862: NASA’s Space Science Grant Process.

DTIC Science & Technology

1995-07-01

Logistics Management Institute Meeting Customer Service Standards Under Executive Order 12862 NASA’s Space Science Grant Process NS302MR2...Logistics Management Institute to survey the customers — proposal writers and peer review panelists — of its science grant process. This effort benefited... Management Institute (LMI) to develop customer satisfac- tion surveys for both proposal writers and peer review panelists as well as to conduct those

Advancement of the Artificial Pancreas through the Development of Interoperability Standards

PubMed Central

Picton, Peter E.; Yeung, Melanie; Hamming, Nathaniel; Desborough, Lane; Dassau, Eyal; Cafazzo, Joseph A.

2013-01-01

Despite advancements in the development of the artificial pancreas, barriers in the form of proprietary data and communication protocols of diabetes devices have made the integration of these components challenging. The Artificial Pancreas Standards and Technical Platform Project is an initiative funded by the JDRF Canadian Clinical Trial Network with the goal of developing device communication standards for the interoperability of diabetes devices. Stakeholders from academia, industry, regulatory agencies, and medical and patient communities have been engaged in advancing this effort. In this article, we describe this initiative along with the process involved in working with the standards organizations and stakeholders that are key to ensuring effective standards are developed and adopted. Discussion from a special session of the 12th Annual Diabetes Technology Meeting is also provided. PMID:23911190

Implementation of a formulary management process.

PubMed

Karel, Lauren I; Delisle, Dennis R; Anagnostis, Ellena A; Wordell, Cindy J

2017-08-15

The application of lean methodology in an initiative to redesign the formulary maintenance process at an academic medical center is described. Maintaining a hospital formulary requires clear communication and coordination among multiple members of the pharmacy department. Using principles of lean methodology, pharmacy department personnel within a multihospital health system launched a multifaceted initiative to optimize formulary management systemwide. The ongoing initiative began with creation of a formulary maintenance redesign committee consisting of pharmacy department personnel with expertise in informatics, automation, purchasing, drug information, and clinical pharmacy services. The committee met regularly and used lean methodology to design a standardized process for management of formulary additions and deletions and changes to medications' formulary status. Through value stream analysis, opportunities for process and performance improvement were identified; staff suggestions on process streamlining were gathered during a series of departmental kaizen events. A standardized template for development and dissemination of monographs associated with formulary additions and status changes was created. In addition, a shared Web-based checklist was developed to facilitate information sharing and timely initiation and completion of tasks involved in formulary status changes, and a permanent formulary maintenance committee was established to monitor and refine the formulary management process. A clearly defined, standardized process within the pharmacy department was developed for tracking necessary steps in enacting formulary changes to encourage safe and efficient workflow. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

National Incident Management System (NIMS) Standards Review Panel Workshop Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stenner, Robert D.; Kirk, Jennifer L.; Stanton, James R.

The importance and need for full compliant implementation of NIMS nationwide was clearly demonstrated during the Hurricane Katrina event, which was clearly expressed in Secretary Chertoff's October 4, 2005 letter addressed to the State's governors. It states, ''Hurricane Katrina was a stark reminder of how critical it is for our nation to approach incident management in a coordinated, consistent, and efficient manner. We must be able to come together, at all levels of government, to prevent, prepare for, respond to, and recover from any emergency or disaster. Our operations must be seamless and based on common incident management doctrine, becausemore » the challenges we face as a nation are far greater than capabilities of any one jurisdiction.'' The NIMS is a system/architecture for organizing response on a ''national'' level. It incorporations ICS as a main component of that structure (i.e., it institutionalizes ICS in NIMS). In a paper published on the NIMS Website, the following statements were made: ''NIMS represents a core set of doctrine, principles, terminology, and organizational processes to enable effective, efficient and collaborative incident management at all levels. To provide the framework for interoperability and compatibility, the NIMS is based on a balance between flexibility and standardization.'' Thus the NIC is challenged with the need to adopt quality SDO generated standards to support NIMS compliance, but in doing so maintain the flexibility necessary so that response operations can be tailored for the specific jurisdictional and geographical needs across the nation. In support of this large and complex challenge facing the NIC, the Pacific Northwest National Laboratory (PNNL) was asked to provide technical support to the NIC, through their DHS Science and Technology ? Standards Portfolio Contract, to help identify, review, and develop key standards for NIMS compliance. Upon examining the challenge, the following general process appears to be a reasonable approach for identifying and establishing existing standards that would be applicable to NIMS compliance. The suggested generalized steps to establishing existing SDO generated standards for NIMS compliance are: (1) establish search criteria from the NIMS and its support documents, (2) search SDO databases to identify key existing nationally and/or internationally recognized standards that have potential application to NIMS compliance needs, (3) review the identified standards against the specific component needs of the NIMS, (4) identify the pertinent aspects/components of those identified standards that clearly address specific NIMS compliance needs, (5) establish a process to adopt the pertinent standards, which includes the generation of formalized FEMA Guidance that identifies the specific NIMS component compliance needs addressed in the respective standard, (6) develop performance criteria for which to measure compliance with the identified NIMS components addressed by the respective adopted standard, and (7) adopt the standard, publish the guidance and performance criteria, and incorporate it into routine FEMA/NIC NIMS management operations. This review process will also help identify real gaps in standards for which new NIMS specific standards should be developed. To jump start this process and hopefully identify some key ''low hanging fruit'' standards the NIC could use to begin such a process, a panel of first-responder experts (familiar with the current standards of common use in the first-responder community) from various response disciplines was formed and a workshop held. The workshop included a pre-workshop information gathering process. This report discusses the workshop and its findings in detail.« less

STRS Compliant FPGA Waveform Development

NASA Technical Reports Server (NTRS)

Nappier, Jennifer; Downey, Joseph

2008-01-01

The Space Telecommunications Radio System (STRS) Architecture Standard describes a standard for NASA space software defined radios (SDRs). It provides a common framework that can be used to develop and operate a space SDR in a reconfigurable and reprogrammable manner. One goal of the STRS Architecture is to promote waveform reuse among multiple software defined radios. Many space domain waveforms are designed to run in the special signal processing (SSP) hardware. However, the STRS Architecture is currently incomplete in defining a standard for designing waveforms in the SSP hardware. Therefore, the STRS Architecture needs to be extended to encompass waveform development in the SSP hardware. A transmit waveform for space applications was developed to determine ways to extend the STRS Architecture to a field programmable gate array (FPGA). These extensions include a standard hardware abstraction layer for FPGAs and a standard interface between waveform functions running inside a FPGA. Current standards were researched and new standard interfaces were proposed. The implementation of the proposed standard interfaces on a laboratory breadboard SDR will be presented.

The CMMI Product Suite and International Standards

DTIC Science & Technology

2006-07-01

standards: “2.3 Reference Documents 2.3.1 Applicable ISO /IEC documents, including ISO /IEC 12207 and ISO /IEC 15504.” “3.1 Development User Requirements...related international standards such as ISO 9001:2000, 12207 , 15288 © 2006 by Carnegie Mellon University Page 12 Key Supplements Needed...the Measurement Framework in ISO /IEC 15504; and • the Process Reference Model included in ISO /IEC 12207 . A possible approach has been developed for

36 CFR 910.58 - Development.

Code of Federal Regulations, 2010 CFR

2010-07-01

... GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA AVENUE..., planned unit development, or project resulting from the process of planning, land acquisition, demolition...

36 CFR 910.58 - Development.

Code of Federal Regulations, 2011 CFR

2011-07-01

... GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA AVENUE..., planned unit development, or project resulting from the process of planning, land acquisition, demolition...

International standards for brucellosis prevention and management.

PubMed

Ragan, V; Vroegindewey, G; Babcock, S

2013-04-01

International standards are a crucial element in brucellosis prevention and management. They allow policy-makers, scientists, epidemiologists, laboratories and trade entities to have a common vocabulary for communication and understanding of the disease. These standards cover the entire spectrum of activities from surveillance, testing, prophylaxis, transport and trade to policy development, research and reporting. Developing, adhering to and monitoring standards increases both the effectiveness and efficiency of prevention and management programmes. Creating standards with the input of all stakeholders ensures that the standards do not adversely affect the requirements of any of the multiple parties involved. The World Organisation for Animal Health (OIE), in conjunction with its Member Countries, and through its standing and ad hoc committees plus expert input, has taken a key leadership role in developing and reviewing brucellosis standards. These standards are used to harmonise testing, prevention processes, vaccines and reporting, to support trade and to protect human and animal health.

Peculiarities of Professional Training Standards Development and Implementation within Competency-Based Approach: Foreign Experience

ERIC Educational Resources Information Center

Desyatov, Tymofiy

2015-01-01

The article analyzes the development of competency-based professional training standards and their implementation into educational process in foreign countries. It determines that the main idea of competency-based approach is competency-and-active learning, which aims at complex acquirement of diverse skills and ways of practice activities via…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herk, A.; Beggs, T.

This report outlines the steps a developer can take when creating and implementing high performance standards such as the U.S. Department of Energy’s (DOE’s) Zero Energy Ready Home (ZERH) standards on a community-wide scale. The report also describes the specific examples of how this process is underway in the Stapleton community in Denver, Colorado, by the developer Forest City.

Common Core State Standards: Implementation Tools and Resources

ERIC Educational Resources Information Center

Council of Chief State School Officers, 2013

2013-01-01

The Council of Chief State School Officers (CCSSO or the Council) developed this list of free tools and resources to support state education agencies, districts, and educators during the process of implementing the Common Core State Standards (CCSS). This document primarily lists resources developed by CCSSO and other leading organizations and is…

Youth Arts: Creativity and Art as a Vehicle for Youth Development

ERIC Educational Resources Information Center

Houbolt, Sarah

2010-01-01

The Auckland City Council arts team has managed several successful youth arts projects across the city of Auckland. The council aims to establish a best-practice standard for community artists in line with international standards of community cultural development. This reflective paper explores the processes, impacts and outcomes of some of the…

Development of advanced second-generation micromirror devices fabricated in a four-level planarized surface-micromachined polycrystalline silicon process

NASA Astrophysics Data System (ADS)

Michalicek, M. Adrian; Comtois, John H.; Schriner, Heather K.

1998-04-01

This paper describes the design and characterization of several types of micromirror devices to include process capabilities, device modeling, and test data resulting in deflection versus applied potential curves and surface contour measurements. These devices are the first to be fabricated in the state-of-the-art four-level planarized polysilicon process available at Sandia National Laboratories known as the Sandia Ultra-planar Multi-level MEMS Technology. This enabling process permits the development of micromirror devices with near-ideal characteristics which have previously been unrealizable in standard three-layer polysilicon processes. This paper describes such characteristics which have previously been unrealizable in standard three-layer polysilicon processes. This paper describes such characteristics as elevated address electrodes, various address wiring techniques, planarized mirror surfaces suing Chemical Mechanical Polishing, unique post-process metallization, and the best active surface area to date.

Determination of water environment standards based on water quality criteria in China: Limitations and feasibilities.

PubMed

Wang, Tieyu; Zhou, Yunqiao; Bi, Cencen; Lu, Yonglong; He, Guizhen; Giesy, John P

2017-07-01

There is a need to formulate water environment standards (WESs) from the current water quality criteria (WQC) in China. To this end, we briefly summarize typical mechanisms applied in several countries with longer histories of developing WESs, and three limitations to formulating WESs in China were identified. After analyzing the feasibility factors including economic development, scientific support capability and environmental policies, we realized that China is still not ready for a complete change from its current nation-wide unified WES system to a local-standard-based system. Thus, we proposed a framework for transformation from WQC to WESs in China. The framework consists of three parts, including responsibilities, processes and policies. The responsibilities include research authorization, development of guidelines, and collection of information, at both national and local levels; the processes include four steps and an impact factor system to establish water quality standards; and the policies include seven specific proposals. Copyright © 2016. Published by Elsevier B.V.

Modeling Standards of Care for an Online Environment

PubMed Central

Jones-Schenk, Jan; Rossi, Julia

1998-01-01

At Intermountain Health Care in Salt Lake City a team was created to develop core standards for clinical practice that would enhance consistency of care across the care continuum. The newly developed Standards of Care had to meet the following criteria: electronic delivery, research-based, and support an interdisciplinary care environment along with an exception-based documentation system. The process has slowly evolved and the team has grown to include clinicians from multiple sites and disciplines who have met on a regular basis for over a year. The first challenge was to develop a model for the standards of care that would be suitable for an online environment.

Development of polypyrrole based solid-state on-chip microactuators using photolithography

NASA Astrophysics Data System (ADS)

Zhong, Yong; Lundemo, Staffan; Jager, Edwin W. H.

2018-07-01

There is a need for soft microactuators, especially for biomedical applications. We have developed a microfabrication process to create such soft, on-chip polymer based microactuators that can operate in air. The on-chip microactuators were fabricated using standard photolithographic techniques and wet etching, combined with special designed process to micropattern the electroactive polymer polypyrrole that drives the microactuators. By immobilizing a UV-patternable gel containing a liquid electrolyte on top of the electroactive polypyrrole layer, actuation in air was achieved although with reduced movement. Further optimization of the processing is currently on-going. The result shows the possibility to batch fabricate complex microsystems such as microrobotics and micromanipulators based on these solid-state on-chip microactuators using microfabrication methods including standard photolithographic processes.

Achieving Excellence Through Contemporary and Relevant Psychiatric-Mental Health Nursing Standards of Practice.

PubMed

McInnis-Perry, Gloria; Greene, Ann; Mina, Elaine Santa

2015-09-01

Standards of practice (SOPs) comprise competency statements, which are grounded in current knowledge and research, and provide foundations for performance that support professional accountability. The nursing profession, and specifically the psychiatric-mental health specialty of nursing practice in Canada, develops and revises practice standards regularly. The current article describes the collaborative, evidence-informed journey of the Canadian Federation of Mental Health Nurses during its fourth revision of the Canadian Psychiatric-Mental Health Nursing SOPs. An intraprofessional team of psychiatric-mental health nurses from the clinical, academic, research, and policy areas developed and nurtured collaborative processes that emphasize collegial and authentic relationships. Effective communication and a respectful learning environment supported the process for all members of the team. The current article provides recommendations for other professional organizations considering developing and/or revising SOPs. Copyright 2015, SLACK Incorporated.

Illinois Occupational Skill Standards: Clinical Laboratory Science/Biotechnology Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for workforce preparation program providers, details the Illinois Occupational Skill Standards for clinical laboratory occupations programs. The document begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing, the process used to develop the…

77 FR 14343 - Announcement of the American Petroleum Institute's Standards Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... Petroleum Institute develops and publishes voluntary standards for equipment, materials, operations, and processes for the petroleum and natural gas industry. These standards are used by both private industry and... Transportation of Line Pipe, 1st Edition. Recommended Practice 6DR, Repair and Remanufacture of Pipeline Valves...

N400 Event-Related Potential and Standardized Measures of Reading in Late Elementary School Children: Correlated or Independent?

ERIC Educational Resources Information Center

Coch, Donna; Benoit, Clarisse

2015-01-01

We investigated whether and how standardized behavioral measures of reading and electrophysiological measures of reading were related in 72 typically developing, late elementary school children. Behavioral measures included standardized tests of spelling, phonological processing, vocabulary, comprehension, naming speed, and memory.…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carr, S.J.

The development of nuclear standards is an active and necessary endeavor that is concerned with the safe, orderly, and economic development of nuclear potential. There are almost 4100 people from the teachnical community who are presently involved either in writing nuclear standards, including codes, or in the management and processing roles necessary for their approval and promulgation. This document identifies the current participation of each individual as member, chairman, cochairman (vice-chairman), or secretary of about 700 standards development committees and groups. The standards committees and groups are identified with the organizations that are responsible for the preparation, review, and maintenancemore » of the standards and that provide support through supervisory committees and headquarters staff. This directory includes four major sections: personnel, employers, committees, and a Key-Word-in-Context (KWIC) Index of committee titles. It can also be used to identify the participation of employers as well as to recognize the contributions of individuals to the often interdisciplinary activity of standards development.« less

Information system life-cycle and documentation standards, volume 1

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

The Software Management and Assurance Program (SMAP) Information System Life-Cycle and Documentation Standards Document describes the Version 4 standard information system life-cycle in terms of processes, products, and reviews. The description of the products includes detailed documentation standards. The standards in this document set can be applied to the life-cycle, i.e., to each phase in the system's development, and to the documentation of all NASA information systems. This provides consistency across the agency as well as visibility into the completeness of the information recorded. An information system is software-intensive, but consists of any combination of software, hardware, and operational procedures required to process, store, or transmit data. This document defines a standard life-cycle model and content for associated documentation.

Utilization of a Clinical Trial Management System for the Whole Clinical Trial Process as an Integrated Database: System Development

PubMed Central

Park, Yu Rang; Yoon, Young Jo; Koo, HaYeong; Yoo, Soyoung; Choi, Chang-Min; Beck, Sung-Ho

2018-01-01

Background Clinical trials pose potential risks in both communications and management due to the various stakeholders involved when performing clinical trials. The academic medical center has a responsibility and obligation to conduct and manage clinical trials while maintaining a sufficiently high level of quality, therefore it is necessary to build an information technology system to support standardized clinical trial processes and comply with relevant regulations. Objective The objective of the study was to address the challenges identified while performing clinical trials at an academic medical center, Asan Medical Center (AMC) in Korea, by developing and utilizing a clinical trial management system (CTMS) that complies with standardized processes from multiple departments or units, controlled vocabularies, security, and privacy regulations. Methods This study describes the methods, considerations, and recommendations for the development and utilization of the CTMS as a consolidated research database in an academic medical center. A task force was formed to define and standardize the clinical trial performance process at the site level. On the basis of the agreed standardized process, the CTMS was designed and developed as an all-in-one system complying with privacy and security regulations. Results In this study, the processes and standard mapped vocabularies of a clinical trial were established at the academic medical center. On the basis of these processes and vocabularies, a CTMS was built which interfaces with the existing trial systems such as the electronic institutional review board health information system, enterprise resource planning, and the barcode system. To protect patient data, the CTMS implements data governance and access rules, and excludes 21 personal health identifiers according to the Health Insurance Portability and Accountability Act (HIPAA) privacy rule and Korean privacy laws. Since December 2014, the CTMS has been successfully implemented and used by 881 internal and external users for managing 11,645 studies and 146,943 subjects. Conclusions The CTMS was introduced in the Asan Medical Center to manage the large amounts of data involved with clinical trial operations. Inter- and intraunit control of data and resources can be easily conducted through the CTMS system. To our knowledge, this is the first CTMS developed in-house at an academic medical center side which can enhance the efficiency of clinical trial management in compliance with privacy and security laws. PMID:29691212

Quality Space and Launch Requirements Addendum to AS9100C

DTIC Science & Technology

2015-03-05

45 8.9.1 Statistical Process Control (SPC) .......................................................................... 45 8.9.1.1 Out of Control...Systems Center SME Subject Matter Expert SOW Statement of Work SPC Statistical Process Control SPO System Program Office SRP Standard Repair...individual data exceeding the control limits. Control limits are developed using standard statistical methods or other approved techniques and are based on

A Guide for Developing Standard Operating Job Procedures for the Tertiary Chemical Treatment - Lime Precipitation Process Wastewater Treatment Facility. SOJP No. 6.

ERIC Educational Resources Information Center

Petrasek, Al, Jr.

This guide describes the standard operating job procedures for the tertiary chemical treatment - lime precipitation process of wastewater treatment plants. Step-by-step instructions are given for pre-start up, start-up, continuous operation, and shut-down procedures. In addition, some theoretical material is presented along with some relevant…

Indicators of standards of the quality of the visitor experience at a heavily-used national park

Treesearch

Robert E. Manning; David W. Lime; Richard F. McMonagle

1995-01-01

Contemporary approaches to determining and managing carrying capacity of national parks and similar areas focus on indicators and standards of quality. The National Park Service is currently developing the Visitor Experience and Resource Protection process which adopts this approach to carrying capacity. This process is being applied to Arches National Park, Utah,...

Development of spatial data guidelines and standards: spatial data set documentation to support hydrologic analysis in the U.S. Geological Survey

USGS Publications Warehouse

Fulton, James L.

1992-01-01

Spatial data analysis has become an integral component in many surface and sub-surface hydrologic investigations within the U.S. Geological Survey (USGS). Currently, one of the largest costs in applying spatial data analysis is the cost of developing the needed spatial data. Therefore, guidelines and standards are required for the development of spatial data in order to allow for data sharing and reuse; this eliminates costly redevelopment. In order to attain this goal, the USGS is expanding efforts to identify guidelines and standards for the development of spatial data for hydrologic analysis. Because of the variety of project and database needs, the USGS has concentrated on developing standards for documenting spatial sets to aid in the assessment of data set quality and compatibility of different data sets. An interim data set documentation standard (1990) has been developed that provides a mechanism for associating a wide variety of information with a data set, including data about source material, data automation and editing procedures used, projection parameters, data statistics, descriptions of features and feature attributes, information on organizational contacts lists of operations performed on the data, and free-form comments and notes about the data, made at various times in the evolution of the data set. The interim data set documentation standard has been automated using a commercial geographic information system (GIS) and data set documentation software developed by the USGS. Where possible, USGS developed software is used to enter data into the data set documentation file automatically. The GIS software closely associates a data set with its data set documentation file; the documentation file is retained with the data set whenever it is modified, copied, or transferred to another computer system. The Water Resources Division of the USGS is continuing to develop spatial data and data processing standards, with emphasis on standards needed to support hydrologic analysis, hydrologic data processing, and publication of hydrologic thermatic maps. There is a need for the GIS vendor community to develop data set documentation tools similar to those developed by the USGS, or to incorporate USGS developed tools in their software.

SU-B-213-00: Education Council Symposium: Accreditation and Certification: Establishing Educational Standards and Evaluating Candidates Based on these Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization.more » In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP.« less

Evolving the ECSS Standards and their Use: Experience Based on Industrial Case Studies

NASA Astrophysics Data System (ADS)

Feldt, R.; Ahmad, E.; Raza, B.; Hult, E.; Nordebäck, T.

2009-05-01

This paper introduces two case studies conducted at two Swedish companies developing software for the space industry. The overall goal of the project is to evaluate if current use of ECSS is cost efficient and if there are ways to make the process leaner while maintaining quality. The case studies reported on here focused on how the ECSS standard was used by the companies and how that affected software development processes and software quality. This paper describes the results and recommendations based on identified challenges.

Standardization of domestic frying processes by an engineering approach.

PubMed

Franke, K; Strijowski, U

2011-05-01

An approach was developed to enable a better standardization of domestic frying of potato products. For this purpose, 5 domestic fryers differing in heating power and oil capacity were used. A very defined frying process using a highly standardized model product and a broad range of frying conditions was carried out in these fryers and the development of browning representing an important quality parameter was measured. Product-to-oil ratio, oil temperature, and frying time were varied. Quite different color changes were measured in the different fryers although the same frying process parameters were applied. The specific energy consumption for water evaporation (spECWE) during frying related to product amount was determined for all frying processes to define an engineering parameter for characterizing the frying process. A quasi-linear regression approach was applied to calculate this parameter from frying process settings and fryer properties. The high significance of the regression coefficients and a coefficient of determination close to unity confirmed the suitability of this approach. Based on this regression equation, curves for standard frying conditions (SFC curves) were calculated which describe the frying conditions required to obtain the same level of spECWE in the different domestic fryers. Comparison of browning results from the different fryers operated at conditions near the SFC curves confirmed the applicability of the approach. © 2011 Institute of Food Technologists®

Development of NASA Technical Standards Program Relative to Enhancing Engineering Capabilities

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2003-01-01

The enhancement of engineering capabilities is an important aspect of any organization; especially those engaged in aerospace development activities. Technical Standards are one of the key elements of this endeavor. The NASA Technical Standards Program was formed in 1997 in response to the NASA Administrator s directive to develop an Agencywide Technical Standards Program. The Program s principal objective involved the converting Center-unique technical standards into Agency wide standards and the adoption/endorsement of non-Government technical standards in lieu of government standards. In the process of these actions, the potential for further enhancement of the Agency s engineering capabilities was noted relative to value of being able to access Agencywide the necessary full-text technical standards, standards update notifications, and integration of lessons learned with technical standards, all available to the user from one Website. This was accomplished and is now being enhanced based on feedbacks from the Agency's engineering staff and supporting contractors. This paper addresses the development experiences with the NASA Technical Standards Program and the enhancement of the Agency's engineering capabilities provided by the Program s products. Metrics are provided on significant aspects of the Program.

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

An intraorganizational model for developing and spreading quality improvement innovations.

PubMed

Kellogg, Katherine C; Gainer, Lindsay A; Allen, Adrienne S; OʼSullivan, Tatum; Singer, Sara J

Recent policy reforms encourage quality improvement (QI) innovations in primary care, but practitioners lack clear guidance regarding spread inside organizations. We designed this study to identify how large organizations can facilitate intraorganizational spread of QI innovations. We conducted ethnographic observation and interviews in a large, multispecialty, community-based medical group that implemented three QI innovations across 10 primary care sites using a new method for intraorganizational process development and spread. We compared quantitative outcomes achieved through the group's traditional versus new method, created a process model describing the steps in the new method, and identified barriers and facilitators at each step. The medical group achieved substantial improvement using its new method of intraorganizational process development and spread of QI innovations: standard work for rooming and depression screening, vaccine error rates and order compliance, and Pap smear error rates. Our model details nine critical steps for successful intraorganizational process development (set priorities, assess the current state, develop the new process, and measure and refine) and spread (develop support, disseminate information, facilitate peer-to-peer training, reinforce, and learn and adapt). Our results highlight the importance of utilizing preexisting organizational structures such as established communication channels, standardized roles, common workflows, formal authority, and performance measurement and feedback systems when developing and spreading QI processes inside an organization. In particular, we detail how formal process advocate positions in each site for each role can facilitate the spread of new processes. Successful intraorganizational spread is possible and sustainable. Developing and spreading new QI processes across sites inside an organization requires creating a shared understanding of the necessary process steps, considering the barriers that may arise at each step, and leveraging preexisting organizational structures to facilitate intraorganizational process development and spread.

An intraorganizational model for developing and spreading quality improvement innovations

PubMed Central

Kellogg, Katherine C.; Gainer, Lindsay A.; Allen, Adrienne S.; O'Sullivan, Tatum; Singer, Sara J.

2017-01-01

Background: Recent policy reforms encourage quality improvement (QI) innovations in primary care, but practitioners lack clear guidance regarding spread inside organizations. Purpose: We designed this study to identify how large organizations can facilitate intraorganizational spread of QI innovations. Methodology/Approach: We conducted ethnographic observation and interviews in a large, multispecialty, community-based medical group that implemented three QI innovations across 10 primary care sites using a new method for intraorganizational process development and spread. We compared quantitative outcomes achieved through the group’s traditional versus new method, created a process model describing the steps in the new method, and identified barriers and facilitators at each step. Findings: The medical group achieved substantial improvement using its new method of intraorganizational process development and spread of QI innovations: standard work for rooming and depression screening, vaccine error rates and order compliance, and Pap smear error rates. Our model details nine critical steps for successful intraorganizational process development (set priorities, assess the current state, develop the new process, and measure and refine) and spread (develop support, disseminate information, facilitate peer-to-peer training, reinforce, and learn and adapt). Our results highlight the importance of utilizing preexisting organizational structures such as established communication channels, standardized roles, common workflows, formal authority, and performance measurement and feedback systems when developing and spreading QI processes inside an organization. In particular, we detail how formal process advocate positions in each site for each role can facilitate the spread of new processes. Practice Implications: Successful intraorganizational spread is possible and sustainable. Developing and spreading new QI processes across sites inside an organization requires creating a shared understanding of the necessary process steps, considering the barriers that may arise at each step, and leveraging preexisting organizational structures to facilitate intraorganizational process development and spread. PMID:27428788

15 CFR 10.3 - Development of a proposed standard.

Code of Federal Regulations, 2010 CFR

2010-01-01

... rational statements pertaining to the requirements and test methods contained in the standard, if deemed... be submitted to the Department for further processing. [51 FR 22497, June 20, 1986, as amended at 55...

[Comparative analysis on industrial standardization degree of Chinese and Korean ginseng].

PubMed

Chu, Qiao; Xi, Xing-Jun; Wang, He-Yan; Si, Ding-Hua; Tang, Fei; Lan, Tao

2017-05-01

Panax ginseng is a well-known medicinal plant all over the world. It has high nutritional value and medicinal value. China and South Korea are the major countries in the world for ginseng cultivation, production and exportation. China's ginseng production accounts for more than half of the world, but the output value is less than that of Korea. The standardization process of ginseng industry plays an important role. This paper makes a detailed analysis of the Chinese and Korean ginseng national standards and the standardization process, and makes a detailed comparative analysis of the categories, standard contents, index selection, age, implementation and promotion status of the Chinese and Korean ginseng standards. The development disadvantages of ginseng industry standardization were displayed. And we give our advises on the standard revision, implementation of China's ginseng industry standardization, hoping to enhance the competitiveness of China's ginseng industry. Copyright© by the Chinese Pharmaceutical Association.

Introduction and development of NCP using ICNP in Pakistan.

PubMed

Rukanuddin, R J

2005-12-01

Traditionally, nursing care has been described as performing nursing tasks and often focused on nurses carrying out doctors' orders. In many countries of the world, including Pakistan, nurses do not document care in a standardized manner. Because of this limitation many health administrators, policy makers, and consumers make inadequate assumptions about nursing work, often regarding nurses as any other 'health care technician' who can be easily replaced by more economical health care workers. To overcome this problem, standardized documentation is being introduced into the Aga Khan University School of Nursing and hospital, Aga Khan Health Services, Public Health School in Karachi, and government colleges of nursing, using the International Classification for Nursing Practice (ICNP). The purpose of this paper is to highlight the process of introducing and developing standardized nursing care plans (NCP) using ICNP in Pakistan. The process for introducing ICNP consists of four components, including administrative planning, development, teaching and training, and testing. Subsets of the ICNP for (i) maternity: antenatal, postnatal and natal care; and (ii) cardiology were developed using standardized NCPs. The subsets were developed by nurse experts and introduced at the testing sites. The testing will be conducted as a pilot project. Findings from the pilot will be used to continue and expand standardized nursing documentation using the ICNP across Pakistan. Through this project, nurses, midwives and lady health visitors (midwives, vaccinator and health educators) will test standardization of documentation and begin to evaluate efficiency and effectiveness of clinical practice.

Final Report. An Integrated Partnership to Create and Lead the Solar Codes and Standards Working Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenthal, Andrew

The DOE grant, “An Integrated Partnership to Create and Lead the Solar Codes and Standards Working Group,” to New Mexico State University created the Solar America Board for Codes and Standards (Solar ABCs). From 2007 – 2013 with funding from this grant, Solar ABCs identified current issues, established a dialogue among key stakeholders, and catalyzed appropriate activities to support the development of codes and standards that facilitated the installation of high quality, safe photovoltaic systems. Solar ABCs brought the following resources to the PV stakeholder community; Formal coordination in the planning or revision of interrelated codes and standards removing “stovemore » pipes” that have only roofing experts working on roofing codes, PV experts on PV codes, fire enforcement experts working on fire codes, etc.; A conduit through which all interested stakeholders were able to see the steps being taken in the development or modification of codes and standards and participate directly in the processes; A central clearing house for new documents, standards, proposed standards, analytical studies, and recommendations of best practices available to the PV community; A forum of experts that invites and welcomes all interested parties into the process of performing studies, evaluating results, and building consensus on standards and code-related topics that affect all aspects of the market; and A biennial gap analysis to formally survey the PV community to identify needs that are unmet and inhibiting the market and necessary technical developments.« less

A standard-driven approach for electronic submission to pharmaceutical regulatory authorities.

PubMed

Lin, Ching-Heng; Chou, Hsin-I; Yang, Ueng-Cheng

2018-03-01

Using standards is not only useful for data interchange during the process of a clinical trial, but also useful for analyzing data in a review process. Any step, which speeds up approval of new drugs, may benefit patients. As a result, adopting standards for regulatory submission becomes mandatory in some countries. However, preparing standard-compliant documents, such as annotated case report form (aCRF), needs a great deal of knowledge and experience. The process is complex and labor-intensive. Therefore, there is a need to use information technology to facilitate this process. Instead of standardizing data after the completion of a clinical trial, this study proposed a standard-driven approach. This approach was achieved by implementing a computer-assisted "standard-driven pipeline (SDP)" in an existing clinical data management system. SDP used CDISC standards to drive all processes of a clinical trial, such as the design, data acquisition, tabulation, etc. RESULTS: A completed phase I/II trial was used to prove the concept and to evaluate the effects of this approach. By using the CDISC-compliant question library, aCRFs were generated automatically when the eCRFs were completed. For comparison purpose, the data collection process was simulated and the collected data was transformed by the SDP. This new approach reduced the missing data fields from sixty-two to eight and the controlled term mismatch field reduced from eight to zero during data tabulation. This standard-driven approach accelerated CRF annotation and assured data tabulation integrity. The benefits of this approach include an improvement in the use of standards during the clinical trial and a reduction in missing and unexpected data during tabulation. The standard-driven approach is an advanced design idea that can be used for future clinical information system development. Copyright © 2018 Elsevier Inc. All rights reserved.

[Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control].

PubMed

Dong, Ling; Sun, Yu; Pei, Wen-Xuan; Dai, Jun-Dong; Wang, Zi-Yu; Pan, Meng; Chen, Jiang-Peng; Wang, Yun

2017-12-01

The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry. Copyright© by the Chinese Pharmaceutical Association.

Chiropractic quality assurance: standards and guidelines

PubMed Central

Gatterman, Meridel I; Dobson, Thomas P; LeFevbre, Ron

2001-01-01

Chiropractic quality assurance involves development of both clinical guidelines and standards. Confusion generated by poor differentiation of guidelines from standards contributes to mistrust of the guideline development process. Guidelines are considered to be recommendations that allow for flexibility and individual patient differences. Standards are more binding and require a high level of supporting evidence. While guidelines serve as educational tools to improve the quality of practice, standards that outline minimum competency are used more as administrative tools on which to base policy. Barriers to development of clinical guidelines and standards include fear that they will create prescriptive “cookbook” practice, and the distrust that guidelines are developed primarily for cost containment. Clinicians also criticize guidelines developed by academics that don't relate to practice, and those based on evidence that lacks clinical relevance. Conflicting guidelines perceived to be based on strong bias or conflict of interest are also suspect. To reduce barriers to acceptance and implementation, guidelines should be inclusive, patient-centered, and based on a variety of evidence and clinical experience.

Smart Frameworks and Self-Describing Models: Model Metadata for Automated Coupling of Hydrologic Process Components (Invited)

NASA Astrophysics Data System (ADS)

Peckham, S. D.

2013-12-01

Model coupling frameworks like CSDMS (Community Surface Dynamics Modeling System) and ESMF (Earth System Modeling Framework) have developed mechanisms that allow heterogeneous sets of process models to be assembled in a plug-and-play manner to create composite "system models". These mechanisms facilitate code reuse, but must simultaneously satisfy many different design criteria. They must be able to mediate or compensate for differences between the process models, such as their different programming languages, computational grids, time-stepping schemes, variable names and variable units. However, they must achieve this interoperability in a way that: (1) is noninvasive, requiring only relatively small and isolated changes to the original source code, (2) does not significantly reduce performance, (3) is not time-consuming or confusing for a model developer to implement, (4) can very easily be updated to accommodate new versions of a given process model and (5) does not shift the burden of providing model interoperability to the model developers, e.g. by requiring them to provide their output in specific forms that meet the input requirements of other models. In tackling these design challenges, model framework developers have learned that the best solution is to provide each model with a simple, standardized interface, i.e. a set of standardized functions that make the model: (1) fully-controllable by a caller (e.g. a model framework) and (2) self-describing. Model control functions are separate functions that allow a caller to initialize the model, advance the model's state variables in time and finalize the model. Model description functions allow a caller to retrieve detailed information on the model's input and output variables, its computational grid and its timestepping scheme. If the caller is a modeling framework, it can compare the answers to these queries with similar answers from other process models in a collection and then automatically call framework service components as necessary to mediate the differences between the coupled models. This talk will first review two key products of the CSDMS project, namely a standardized model interface called the Basic Model Interface (BMI) and the CSDMS Standard Names. The standard names are used in conjunction with BMI to provide a semantic matching mechanism that allows output variables from one process model to be reliably used as input variables to other process models in a collection. They include not just a standardized naming scheme for model variables, but also a standardized set of terms for describing the attributes and assumptions of a given model. To illustrate the power of standardized model interfaces and metadata, a smart, light-weight modeling framework written in Python will be introduced that can automatically (without user intervention) couple a set of BMI-enabled hydrologic process components together to create a spatial hydrologic model. The same mechanisms could also be used to provide seamless integration (import/export) of data and models.

Development of NASA's Models and Simulations Standard

NASA Technical Reports Server (NTRS)

Bertch, William J.; Zang, Thomas A.; Steele, Martin J.

2008-01-01

From the Space Shuttle Columbia Accident Investigation, there were several NASA-wide actions that were initiated. One of these actions was to develop a standard for development, documentation, and operation of Models and Simulations. Over the course of two-and-a-half years, a team of NASA engineers, representing nine of the ten NASA Centers developed a Models and Simulation Standard to address this action. The standard consists of two parts. The first is the traditional requirements section addressing programmatics, development, documentation, verification, validation, and the reporting of results from both the M&S analysis and the examination of compliance with this standard. The second part is a scale for evaluating the credibility of model and simulation results using levels of merit associated with 8 key factors. This paper provides an historical account of the challenges faced by and the processes used in this committee-based development effort. This account provides insights into how other agencies might approach similar developments. Furthermore, we discuss some specific applications of models and simulations used to assess the impact of this standard on future model and simulation activities.

Developing Cultural Competence and Overcoming Ethical Challenges in the Informed Consent Process: An Experience from Egypt

ERIC Educational Resources Information Center

Abdel-Messih, Ibrahim Adib; El-Setouhy, Maged; Crouch, Michael M.; Earhart, Kenneth C.

2008-01-01

Research is conducted in a variety of cultural settings. Ethical standards developed in Europe and the Americas are increasingly applied in these settings, many of which are culturally different from the countries in which these standards originated. To overcome these cultural differences, investigators may be tempted to deviate from ethical…

Journal article reporting standards for qualitative primary, qualitative meta-analytic, and mixed methods research in psychology: The APA Publications and Communications Board task force report.

PubMed

Levitt, Heidi M; Bamberg, Michael; Creswell, John W; Frost, David M; Josselson, Ruthellen; Suárez-Orozco, Carola

2018-01-01

The American Psychological Association Publications and Communications Board Working Group on Journal Article Reporting Standards for Qualitative Research (JARS-Qual Working Group) was charged with examining the state of journal article reporting standards as they applied to qualitative research and with generating recommendations for standards that would be appropriate for a wide range of methods within the discipline of psychology. These standards describe what should be included in a research report to enable and facilitate the review process. This publication marks a historical moment-the first inclusion of qualitative research in APA Style, which is the basis of both the Publication Manual of the American Psychological Association (APA, 2010) and APA Style CENTRAL, an online program to support APA Style. In addition to the general JARS-Qual guidelines, the Working Group has developed standards for both qualitative meta-analysis and mixed methods research. The reporting standards were developed for psychological qualitative research but may hold utility for a broad range of social sciences. They honor a range of qualitative traditions, methods, and reporting styles. The Working Group was composed of a group of researchers with backgrounds in varying methods, research topics, and approaches to inquiry. In this article, they present these standards and their rationale, and they detail the ways that the standards differ from the quantitative research reporting standards. They describe how the standards can be used by authors in the process of writing qualitative research for submission as well as by reviewers and editors in the process of reviewing research. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Software Formal Inspections Guidebook

NASA Technical Reports Server (NTRS)

1993-01-01

The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

College of American Pathologists' laboratory standards for next-generation sequencing clinical tests.

PubMed

Aziz, Nazneen; Zhao, Qin; Bry, Lynn; Driscoll, Denise K; Funke, Birgit; Gibson, Jane S; Grody, Wayne W; Hegde, Madhuri R; Hoeltge, Gerald A; Leonard, Debra G B; Merker, Jason D; Nagarajan, Rakesh; Palicki, Linda A; Robetorye, Ryan S; Schrijver, Iris; Weck, Karen E; Voelkerding, Karl V

2015-04-01

The higher throughput and lower per-base cost of next-generation sequencing (NGS) as compared to Sanger sequencing has led to its rapid adoption in clinical testing. The number of laboratories offering NGS-based tests has also grown considerably in the past few years, despite the fact that specific Clinical Laboratory Improvement Amendments of 1988/College of American Pathologists (CAP) laboratory standards had not yet been developed to regulate this technology. To develop a checklist for clinical testing using NGS technology that sets standards for the analytic wet bench process and for bioinformatics or "dry bench" analyses. As NGS-based clinical tests are new to diagnostic testing and are of much greater complexity than traditional Sanger sequencing-based tests, there is an urgent need to develop new regulatory standards for laboratories offering these tests. To develop the necessary regulatory framework for NGS and to facilitate appropriate adoption of this technology for clinical testing, CAP formed a committee in 2011, the NGS Work Group, to deliberate upon the contents to be included in the checklist. Results . -A total of 18 laboratory accreditation checklist requirements for the analytic wet bench process and bioinformatics analysis processes have been included within CAP's molecular pathology checklist (MOL). This report describes the important issues considered by the CAP committee during the development of the new checklist requirements, which address documentation, validation, quality assurance, confirmatory testing, exception logs, monitoring of upgrades, variant interpretation and reporting, incidental findings, data storage, version traceability, and data transfer confidentiality.

Test Standard Developed for Determining the Slow Crack Growth of Advanced Ceramics at Ambient Temperature

NASA Technical Reports Server (NTRS)

Choi, Sung R.; Salem, Jonathan A.

1998-01-01

The service life of structural ceramic components is often limited by the process of slow crack growth. Therefore, it is important to develop an appropriate testing methodology for accurately determining the slow crack growth design parameters necessary for component life prediction. In addition, an appropriate test methodology can be used to determine the influences of component processing variables and composition on the slow crack growth and strength behavior of newly developed materials, thus allowing the component process to be tailored and optimized to specific needs. At the NASA Lewis Research Center, work to develop a standard test method to determine the slow crack growth parameters of advanced ceramics was initiated by the authors in early 1994 in the C 28 (Advanced Ceramics) committee of the American Society for Testing and Materials (ASTM). After about 2 years of required balloting, the draft written by the authors was approved and established as a new ASTM test standard: ASTM C 1368-97, Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature. Briefly, the test method uses constant stress-rate testing to determine strengths as a function of stress rate at ambient temperature. Strengths are measured in a routine manner at four or more stress rates by applying constant displacement or loading rates. The slow crack growth parameters required for design are then estimated from a relationship between strength and stress rate. This new standard will be published in the Annual Book of ASTM Standards, Vol. 15.01, in 1998. Currently, a companion draft ASTM standard for determination of the slow crack growth parameters of advanced ceramics at elevated temperatures is being prepared by the authors and will be presented to the committee by the middle of 1998. Consequently, Lewis will maintain an active leadership role in advanced ceramics standardization within ASTM. In addition, the authors have been and are involved with several international standardization organizations including the Versailles Project on Advanced Materials and Standards (VAMAS), the International Energy Agency (IEA), and the International Organization for Standardization (ISO). The associated standardization activities involve fracture toughness, strength, elastic modulus, and the machining of advanced ceramics.

Fabrication of a micromold using negative PMER

NASA Astrophysics Data System (ADS)

Kwon, Young A.; Chae, Kyoung-Soo; Jeoung, Dae S.; Kim, Jong Y.; Moon, Sung

2001-10-01

We fabricated a micro mold using UV-lithography process with a novel mold material, negative PMER. Negative PMER(TOK, PMER N-CA3000) is a chemically amplified negative tone photoresist on a novolak resin base. It can be processed using standard equipment such as standard spin coater, baking with ovens or hotplates, and immersion development tools. Good quality resist patterns of up to 36μm thickness were achieved by means of this equipment in a short time. The conditions of this process were pre-exposure bake of 110 degree(s)C/12min, exposure dose of 675mJ/cm2 post-exposure bake of 100 degree(s)C/9min, and development for 10min.

eSPEM - A SPEM Extension for Enactable Behavior Modeling

NASA Astrophysics Data System (ADS)

Ellner, Ralf; Al-Hilank, Samir; Drexler, Johannes; Jung, Martin; Kips, Detlef; Philippsen, Michael

OMG's SPEM - by means of its (semi-)formal notation - allows for a detailed description of development processes and methodologies, but can only be used for a rather coarse description of their behavior. Concepts for a more fine-grained behavior model are considered out of scope of the SPEM standard and have to be provided by other standards like BPDM/BPMN or UML. However, a coarse granularity of the behavior model often impedes a computer-aided enactment of a process model. Therefore, in this paper we present eSPEM, an extension of SPEM, that is based on the UML meta-model and focused on fine-grained behavior and life-cycle modeling and thereby supports automated enactment of development processes.

78 FR 23289 - Public Review of Draft National Shoreline Data Content Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-18

...The Federal Geographic Data Committee (FGDC) is conducting a public review of the draft National Shoreline Data Content Standard. The FGDC has developed a draft National Shoreline Data Content Standard that provides a framework for shoreline data development, sharing of data, and shoreline data transformation and fusion. The FGDC Coastal and Marine Spatial Data Subcommittee, chaired by the National Oceanic and Atmospheric Administration (NOAA), sponsored development of the draft standard. The FGDC Coordination Group, comprised of representatives of Federal agencies, has approved releasing this draft standard for public review and comment. The draft National Shoreline Data Content Standard defines attributes or elements that are common for shoreline data development and provides suggested domains for the elements. The functional scope includes definition of data models, schemas, entities, relationships, definitions, and crosswalks to related standards. The draft National Shoreline Data Content Standard is intended to enhance the shoreline framework by providing technical guidance on shoreline semantics, data structures and their relationships to builders and users of shoreline data. The geographical scope of the draft standard comprises all shorelines of navigable waters within the United States and its territories. The primary intended users of the National Shoreline Data Content Standard are the mapping, shoreline engineering, coastal zone management, flood insurance, and natural resource management communities. The FGDC invites all stakeholders to comment on this draft standard to ensure that it meets their needs. The draft National Shoreline Data Content Standard may be downloaded from https://www.fgdc.gov/standards/projects/FGDC-standards- projects/shoreline-data-content/ revisedDraftNationalShorelineDataContentStandard. Comments shall be submitted using the content template at http://www.fgdc.gov/standards/ process/standards-directives/template.doc. Instructions for completing the comment template are found in FGDC Standards Directive 2d, Standards Working Group Review Guidelines: Review Comment Template, http://www.fgdc.gov/standards/process/standards-directives/directive- 2d-standards-working-group-review-guidelines-review-comment-template. Comments that concern specific issues/changes/additions may result in revisions to the National Shoreline Data Content Standard. Reviewers may obtain information about how comments were addressed upon request. After formal endorsement of the standard by the FGDC, the National Shoreline Data Content Standard and a summary analysis of the changes will be made available to the public on the FGDC Web site, www.fgdc.gov.

Design and development of anthropometric device for the standardization of sizes of knee-ankle-foot orthoses.

PubMed

Dwivedi, M; Shetty, K D; Nath, L Narendra

2009-01-01

An anthropometric device (AD) was designed and developed to collect data on foot and knee of locomotor disabled people. The aim was to standardize the sizes of knee-ankle-foot orthoses (KAFOs) in a standard modular form so that they can be mass produced to cater for fitting to a large number of locomotor disabled people. The anthropometric data collected on large numbers of locomotor disabled people were processed, with the help of a computer programme, to arrive at standard sizes for three modules, i.e. a foot plate (seven sizes), knee pieces (six sizes) and a lateral upright in a universal size. These modules were produced by plastic injection moulding and compression moulding processes using glass-reinforced polypropylene. KAFOs were assembled and fitted to locomotor disabled people. Feedback obtained was encouraging and this vindicated the concept, design and utility of the AD.

Minority Language Standardisation and the Role of Users

ERIC Educational Resources Information Center

Lane, Pia

2015-01-01

Developing a standard for a minority language is not a neutral process; this has consequences for the status of the language and how the language users relate to the new standard. A potential inherent problem with standardisation is whether the language users themselves will accept and identify with the standard. When standardising minority…

The Common Core State Standards Initiative: an Overview

ERIC Educational Resources Information Center

Watt, Michael G.

2011-01-01

The purpose of this study was to evaluate decision making in the Common Core State Standards Initiative as the change process moved from research, development and diffusion activities to adoption of the Common Core State Standards by the states. A decision-oriented evaluation model was used to describe the four stages of planning, structuring,…

Continuous Codes and Standards Improvement (CCSI)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivkin, Carl H; Burgess, Robert M; Buttner, William J

2015-10-21

As of 2014, the majority of the codes and standards required to initially deploy hydrogen technologies infrastructure in the United States have been promulgated. These codes and standards will be field tested through their application to actual hydrogen technologies projects. Continuous codes and standards improvement (CCSI) is a process of identifying code issues that arise during project deployment and then developing codes solutions to these issues. These solutions would typically be proposed amendments to codes and standards. The process is continuous because as technology and the state of safety knowledge develops there will be a need to monitor the applicationmore » of codes and standards and improve them based on information gathered during their application. This paper will discuss code issues that have surfaced through hydrogen technologies infrastructure project deployment and potential code changes that would address these issues. The issues that this paper will address include (1) setback distances for bulk hydrogen storage, (2) code mandated hazard analyses, (3) sensor placement and communication, (4) the use of approved equipment, and (5) system monitoring and maintenance requirements.« less

Short Serious Games Creation under the Paradigm of Software Process and Competencies as Software Requirements. Case Study: Elementary Math Competencies

ERIC Educational Resources Information Center

Barajas-Saavedra, Arturo; Álvarez-Rodriguez, Francisco J.; Mendoza-González, Ricardo; Oviedo-De-Luna, Ana C.

2015-01-01

Development of digital resources is difficult due to their particular complexity relying on pedagogical aspects. Another aspect is the lack of well-defined development processes, experiences documented, and standard methodologies to guide and organize game development. Added to this, there is no documented technique to ensure correct…

National Standards for United States History: Exploring the American Experience. Grades 5-12. Expanded Edition. Including Examples of Student Achievement.

ERIC Educational Resources Information Center

Crabtree, Charlotte; Nash, Gary B.

Developed through a broad-based national consensus building process, the National History Standards project has involved working toward agreement both on the larger purposes of history in the school curriculum and on the more specific history understandings and thinking processes that all students should have equal opportunity to acquire over 12…

National Standards for World History: Exploring Paths to the Present. Grades 5-12, Expanded Edition. Including Examples of Student Achievement.

ERIC Educational Resources Information Center

Crabtree, Charlotte; Nash, Gary B.

Developed through a broad based national consensus building process, the National History Standards project has involved working toward agreement both on the larger purposes of history in the school curriculum and on the more specific history understandings and thinking processes that all students should have equal opportunity to acquire over 12…

Developing Process Maps as a Tool for a Surgical Infection Prevention Quality Improvement Initiative in Resource-Constrained Settings.

PubMed

Forrester, Jared A; Koritsanszky, Luca A; Amenu, Demisew; Haynes, Alex B; Berry, William R; Alemu, Seifu; Jiru, Fekadu; Weiser, Thomas G

2018-06-01

Surgical infections cause substantial morbidity and mortality in low-and middle-income countries (LMICs). To improve adherence to critical perioperative infection prevention standards, we developed Clean Cut, a checklist-based quality improvement program to improve compliance with best practices. We hypothesized that process mapping infection prevention activities can help clinicians identify strategies for improving surgical safety. We introduced Clean Cut at a tertiary hospital in Ethiopia. Infection prevention standards included skin antisepsis, ensuring a sterile field, instrument decontamination/sterilization, prophylactic antibiotic administration, routine swab/gauze counting, and use of a surgical safety checklist. Processes were mapped by a visiting surgical fellow and local operating theater staff to facilitate the development of contextually relevant solutions; processes were reassessed for improvements. Process mapping helped identify barriers to using alcohol-based hand solution due to skin irritation, inconsistent administration of prophylactic antibiotics due to variable delivery outside of the operating theater, inefficiencies in assuring sterility of surgical instruments through lack of confirmatory measures, and occurrences of retained surgical items through inappropriate guidelines, staffing, and training in proper routine gauze counting. Compliance with most processes improved significantly following organizational changes to align tasks with specific process goals. Enumerating the steps involved in surgical infection prevention using a process mapping technique helped identify opportunities for improving adherence and plotting contextually relevant solutions, resulting in superior compliance with antiseptic standards. Simplifying these process maps into an adaptable tool could be a powerful strategy for improving safe surgery delivery in LMICs. Copyright © 2018 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Audit of a Scientific Data Center for Certification as a Trustworthy Digital Repository: A Case Study

NASA Astrophysics Data System (ADS)

Downs, R. R.; Chen, R. S.

2011-12-01

Services that preserve and enable future access to scientific data are necessary to ensure that the data that are being collected today will be available for use by future generations of scientists. Many data centers, archives, and other digital repositories are working to improve their ability to serve as long-term stewards of scientific data. Trust in sustainable data management and preservation capabilities of digital repositories can influence decisions to use these services to deposit or obtain scientific data. Building on the Open Archival Information System (OAIS) Reference Model developed by the Consultative Committee for Space Data Systems (CCSDS) and adopted by the International Organization for Standardization as ISO 14721:2003, new standards are being developed to improve long-term data management processes and documentation. The Draft Information Standard ISO/DIS 16363, "Space data and information transfer systems - Audit and certification of trustworthy digital repositories" offers the potential to evaluate digital repositories objectively in terms of their trustworthiness as long-term stewards of digital resources. In conjunction with this, the CCSDS and ISO are developing another draft standard for the auditing and certification process, ISO/DIS 16919, "Space data and information transfer systems - Requirements for bodies providing audit and certification of candidate trustworthy digital repositories". Six test audits were conducted of scientific data centers and archives in Europe and the United States to test the use of these draft standards and identify potential improvements for the standards and for the participating digital repositories. We present a case study of the test audit conducted on the NASA Socioeconomic Data and Applications Center (SEDAC) and describe the preparation, the audit process, recommendations received, and next steps to obtain certification as a trustworthy digital repository, after approval of the ISO/DIS standards.

Solar industrial process heat systems: An assessment of standards for materials and components

NASA Astrophysics Data System (ADS)

Rossiter, W. J.; Shipp, W. E.

1981-09-01

A study was conducted to obtain information on the performance of materials and components in operational solar industrial process heat (PH) systems, and to provide recommendations for the development of standards including evaluative test procedures for materials and components. An assessment of the needs for standards for evaluating the long-term performance of materials and components of IPH systems was made. The assessment was based on the availability of existing standards, and information obtained from a field survey of operational systems, the literature, and discussions with individuals in the industry. Field inspections of 10 operational IPH systems were performed.

Standardized Semantic Markup for Reference Terminologies, Thesauri and Coding Systems: Benefits for distributed E-Health Applications.

PubMed

Hoelzer, Simon; Schweiger, Ralf K; Liu, Raymond; Rudolf, Dirk; Rieger, Joerg; Dudeck, Joachim

2005-01-01

With the introduction of the ICD-10 as the standard for diagnosis, the development of an electronic representation of its complete content, inherent semantics and coding rules is necessary. Our concept refers to current efforts of the CEN/TC 251 to establish a European standard for hierarchical classification systems in healthcare. We have developed an electronic representation of the ICD-10 with the extensible Markup Language (XML) that facilitates the integration in current information systems or coding software taking into account different languages and versions. In this context, XML offers a complete framework of related technologies and standard tools for processing that helps to develop interoperable applications.

Simulant Basis for the Standard High Solids Vessel Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Reid A.; Fiskum, Sandra K.; Suffield, Sarah R.

The Waste Treatment and Immobilization Plant (WTP) is working to develop a Standard High Solids Vessel Design (SHSVD) process vessel. To support testing of this new design, WTP engineering staff requested that a Newtonian simulant and a non-Newtonian simulant be developed that would represent the Most Adverse Design Conditions (in development) with respect to mixing performance as specified by WTP. The majority of the simulant requirements are specified in 24590-PTF-RPT-PE-16-001, Rev. 0. The first step in this process is to develop the basis for these simulants. This document describes the basis for the properties of these two simulant types. Themore » simulant recipes that meet this basis will be provided in a subsequent document.« less

Developing an ANSI standard for image quality tools for the testing of active millimeter wave imaging systems

NASA Astrophysics Data System (ADS)

Barber, Jeffrey; Greca, Joseph; Yam, Kevin; Weatherall, James C.; Smith, Peter R.; Smith, Barry T.

2017-05-01

In 2016, the millimeter wave (MMW) imaging community initiated the formation of a standard for millimeter wave image quality metrics. This new standard, American National Standards Institute (ANSI) N42.59, will apply to active MMW systems for security screening of humans. The Electromagnetic Signatures of Explosives Laboratory at the Transportation Security Laboratory is supporting the ANSI standards process via the creation of initial prototypes for round-robin testing with MMW imaging system manufacturers and experts. Results obtained for these prototypes will be used to inform the community and lead to consensus objective standards amongst stakeholders. Images collected with laboratory systems are presented along with results of preliminary image analysis. Future directions for object design, data collection and image processing are discussed.

Accelerator controls at CERN: Some converging trends

NASA Astrophysics Data System (ADS)

Kuiper, B.

1990-08-01

CERN's growing services to the high-energy physics community using frozen resources has led to the implementation of "Technical Boards", mandated to assist the management by making recommendations for rationalizations in various technological domains. The Board on Process Control and Electronics for Accelerators, TEBOCO, has emphasized four main lines which might yield economy in resources. First, a common architecture for accelerator controls has been agreed between the three accelerator divisions. Second, a common hardware/software kit has been defined, from which the large majority of future process interfacing may be composed. A support service for this kit is an essential part of the plan. Third, high-level protocols have been developed for standardizing access to process devices. They derive from agreed standard models of the devices and involve a standard control message. This should ease application development and mobility of equipment. Fourth, a common software engineering methodology and a commercial package of application development tools have been adopted. Some rationalization in the field of the man-machine interface and in matters of synchronization is also under way.

Historical development of limits of acceptable change: conceptual clarifications and possible extensions

Treesearch

David N. Cole; George H. Stankey

1997-01-01

The Limits of Acceptable Change (LAC) process was developed to deal with the issue of recreational carrying capacity. For that purpose, the LAC process sought to explicitly define a compromise between resource/visitor experience protection and recreation use goals. The most critical and unique element of the process is the specification of LAC standards that define...

Developing a Science Process Skills Test for Secondary Students: Validity and Reliability Study

ERIC Educational Resources Information Center

Feyzioglu, Burak; Demirdag, Baris; Akyildiz, Murat; Altun, Eralp

2012-01-01

Science process skills are claimed to enable an individual to improve their own life visions and give a scientific view/literacy as a standard of their understanding about the nature of science. The main purpose of this study was to develop a test for measuring a valid, reliable and practical test for Science Process Skills (SPS) in secondary…

A standard satellite control reference model

NASA Technical Reports Server (NTRS)

Golden, Constance

1994-01-01

This paper describes a Satellite Control Reference Model that provides the basis for an approach to identify where standards would be beneficial in supporting space operations functions. The background and context for the development of the model and the approach are described. A process for using this reference model to trace top level interoperability directives to specific sets of engineering interface standards that must be implemented to meet these directives is discussed. Issues in developing a 'universal' reference model are also identified.

Normative Databases for Imaging Instrumentation.

PubMed

Realini, Tony; Zangwill, Linda M; Flanagan, John G; Garway-Heath, David; Patella, Vincent M; Johnson, Chris A; Artes, Paul H; Gaddie, Ian B; Fingeret, Murray

2015-08-01

To describe the process by which imaging devices undergo reference database development and regulatory clearance. The limitations and potential improvements of reference (normative) data sets for ophthalmic imaging devices will be discussed. A symposium was held in July 2013 in which a series of speakers discussed issues related to the development of reference databases for imaging devices. Automated imaging has become widely accepted and used in glaucoma management. The ability of such instruments to discriminate healthy from glaucomatous optic nerves, and to detect glaucomatous progression over time is limited by the quality of reference databases associated with the available commercial devices. In the absence of standardized rules governing the development of reference databases, each manufacturer's database differs in size, eligibility criteria, and ethnic make-up, among other key features. The process for development of imaging reference databases may be improved by standardizing eligibility requirements and data collection protocols. Such standardization may also improve the degree to which results may be compared between commercial instruments.

Normative Databases for Imaging Instrumentation

PubMed Central

Realini, Tony; Zangwill, Linda; Flanagan, John; Garway-Heath, David; Patella, Vincent Michael; Johnson, Chris; Artes, Paul; Ben Gaddie, I.; Fingeret, Murray

2015-01-01

Purpose To describe the process by which imaging devices undergo reference database development and regulatory clearance. The limitations and potential improvements of reference (normative) data sets for ophthalmic imaging devices will be discussed. Methods A symposium was held in July 2013 in which a series of speakers discussed issues related to the development of reference databases for imaging devices. Results Automated imaging has become widely accepted and used in glaucoma management. The ability of such instruments to discriminate healthy from glaucomatous optic nerves, and to detect glaucomatous progression over time is limited by the quality of reference databases associated with the available commercial devices. In the absence of standardized rules governing the development of reference databases, each manufacturer’s database differs in size, eligibility criteria, and ethnic make-up, among other key features. Conclusions The process for development of imaging reference databases may be improved by standardizing eligibility requirements and data collection protocols. Such standardization may also improve the degree to which results may be compared between commercial instruments. PMID:25265003

ISO 9001 in a neonatal intensive care unit (NICU).

PubMed

Vitner, Gad; Nadir, Erez; Feldman, Michael; Yurman, Shmuel

2011-01-01

The aim of this paper is to present the process for approving and certifying a neonatal intensive care unit to ISO 9001 standards. The process started with the department head's decision to improve services quality before deciding to achieve ISO 9001 certification. Department processes were mapped and quality management mechanisms were developed. Process control and performance measurements were defined and implemented to monitor the daily work. A service satisfaction review was conducted to get feedback from families. In total, 28 processes and related work instructions were defined. Process yields showed service improvements. Family satisfaction improved. The paper is based on preparing only one neonatal intensive care unit to the ISO 9001 standard. The case study should act as an incentive for hospital managers aiming to improve service quality based on the ISO 9001 standard. ISO 9001 is becoming a recommended tool to improve clinical service quality.

Low-Cost Rapid Usability Testing: Its Application in Both Product Development and System Implementation.

PubMed

Kushniruk, Andre; Borycki, Elizabeth

2017-01-01

In recent years there has been considerable discussion around the need for certification and regulation of healthcare information technology (IT). In particular, the usability of the products being developed needs to be evaluated. This has included the application of standards designed to ensure the process of system development is user-centered and takes usability into consideration while a product is being developed. In addition to this, in healthcare, organizations in the United States and Europe have also addressed the need and requirement for product certification. However, despite these efforts there are continued reports of unusable and unsafe implementations. In this paper we discuss the need to not only include (and require) usability testing in the one-time development process of health IT products (such as EHRs), but we also argue for the need to additionally develop specific usability standards and requirements for usability testing during the implementation of vendor products (i.e. post product development) in healthcare settings. It is further argued that health IT products that may have been certified regarding their development process will still require application of usability testing in the process of implementing them in real hospital settings in order to ensure usability and safety. This is needed in order to ensure that the final result of both product development and implementation processes take into account and apply the latest usability principles and methods.

NASA Standard for Models and Simulations (M and S): Development Process and Rationale

NASA Technical Reports Server (NTRS)

Zang, Thomas A.; Blattnig, Steve R.; Green, Lawrence L.; Hemsch, Michael J.; Luckring, James M.; Morison, Joseph H.; Tripathi, Ram K.

2009-01-01

After the Columbia Accident Investigation Board (CAIB) report. the NASA Administrator at that time chartered an executive team (known as the Diaz Team) to identify the CAIB report elements with Agency-wide applicability, and to develop corrective measures to address each element. This report documents the chronological development and release of an Agency-wide Standard for Models and Simulations (M&S) (NASA Standard 7009) in response to Action #4 from the report, "A Renewed Commitment to Excellence: An Assessment of the NASA Agency-wide Applicability of the Columbia Accident Investigation Board Report, January 30, 2004".

Emergency healthcare process automation using mobile computing and cloud services.

PubMed

Poulymenopoulou, M; Malamateniou, F; Vassilacopoulos, G

2012-10-01

Emergency care is basically concerned with the provision of pre-hospital and in-hospital medical and/or paramedical services and it typically involves a wide variety of interdependent and distributed activities that can be interconnected to form emergency care processes within and between Emergency Medical Service (EMS) agencies and hospitals. Hence, in developing an information system for emergency care processes, it is essential to support individual process activities and to satisfy collaboration and coordination needs by providing readily access to patient and operational information regardless of location and time. Filling this information gap by enabling the provision of the right information, to the right people, at the right time fosters new challenges, including the specification of a common information format, the interoperability among heterogeneous institutional information systems or the development of new, ubiquitous trans-institutional systems. This paper is concerned with the development of an integrated computer support to emergency care processes by evolving and cross-linking institutional healthcare systems. To this end, an integrated EMS cloud-based architecture has been developed that allows authorized users to access emergency case information in standardized document form, as proposed by the Integrating the Healthcare Enterprise (IHE) profile, uses the Organization for the Advancement of Structured Information Standards (OASIS) standard Emergency Data Exchange Language (EDXL) Hospital Availability Exchange (HAVE) for exchanging operational data with hospitals and incorporates an intelligent module that supports triaging and selecting the most appropriate ambulances and hospitals for each case.

Packaged water: optimizing local processes for sustainable water delivery in developing nations

PubMed Central

2011-01-01

With so much global attention and commitment towards making the Water and Sanitation targets of the Millennium Development Goals (MDGs) a reality, available figures seem to speak on the contrary as they reveal a large disparity between the expected and what currently obtains especially in developing countries. As studies have shown that the standard industrialized world model for delivery of safe drinking water technology may not be affordable in much of the developing world, packaged water is suggested as a low cost, readily available alternative water provision that could help bridge the gap. Despite the established roles that this drinking water source plays in developing nations, its importance is however significantly underestimated, and the source considered unimproved going by 'international standards'. Rather than simply disqualifying water from this source, focus should be on identifying means of improvement. The need for intervening global communities and developmental organizations to learn from and build on the local processes that already operate in the developing world is also emphasized. Identifying packaged water case studies of some developing nations, the implication of a tenacious focus on imported policies, standards and regulatory approaches on drinking water access for residents of the developing world is also discussed. PMID:21801391

Design Of Measurements For Evaluating Readiness Of Technoware Components To Meet The Required Standard Of Products

NASA Astrophysics Data System (ADS)

Fauzi, Ilham; Muharram Hasby, Fariz; Irianto, Dradjad

2018-03-01

Although government is able to make mandatory standards that must be obeyed by the industry, the respective industries themselves often have difficulties to fulfil the requirements described in those standards. This is especially true in many small and medium sized enterprises that lack the required capital to invest in standard-compliant equipment and machineries. This study aims to develop a set of measurement tools for evaluating the level of readiness of production technology with respect to the requirements of a product standard based on the quality function deployment (QFD) method. By combining the QFD methodology, UNESCAP Technometric model [9] and Analytic Hierarchy Process (AHP), this model is used to measure a firm’s capability to fulfill government standard in the toy making industry. Expert opinions from both the governmental officers responsible for setting and implementing standards and the industry practitioners responsible for managing manufacturing processes are collected and processed to find out the technological capabilities that should be improved by the firm to fulfill the existing standard. This study showed that the proposed model can be used successfully to measure the gap between the requirements of the standard and the readiness of technoware technological component in a particular firm.

[The standardization of medical care and the training of medical personnel].

PubMed

Korbut, V B; Tyts, V V; Boĭshenko, V A

1997-09-01

The medical specialist training at all levels (medical orderly, doctor's assistant, general practitioner, doctors) should be based on the medical care standards. Preliminary studies in the field of military medicine standards have demonstrated that the medical service of the Armed Forces of Russia needs medical resources' standards, structure and organization standards, technology standards. Military medical service resources' standards should reflect the requisitions for: all medical specialists' qualification, equipment and material for medical set-ups, field medical systems, drugs, etc. Standards for structures and organization should include requisitions for: command and control systems in military formations' and task forces' medical services and their information support; health-care and evacuation functions, sanitary control and anti-epidemic measures and personnel health protection. Technology standards development could improve and regulate the health care procedures in the process of evacuation. Standards' development will help to solve the problem of the data-base for the military medicine education system and medical research.

Development of the Joint Committee Standards for Evaluations of Educational Programs, Projects, and Materials.

ERIC Educational Resources Information Center

Diamond, Esther E.

The growing demand for program evaluation in the 1970s gave rise to a need for a comprehensive, carefully developed, objective set of guiding principles for the evaluation process, from initial planning to final report. The Joint Committee on Standards for Education Evaluation was established to meet this need. This broad-based group, representing…

Towards the Development of a Model for Hardware Standards in Information Technology Procurement: Factors for Consideration

ERIC Educational Resources Information Center

Ryan, David L.

2010-01-01

While research in academic and professional information technology (IT) journals address the need for strategic alignment and defined IT processes, there is little research about what factors should be considered when implementing specific IT hardware standards in an organization. The purpose of this study was to develop a set of factors for…

Human Integration Design Processes (HIDP)

NASA Technical Reports Server (NTRS)

Boyer, Jennifer

2014-01-01

The purpose of the Human Integration Design Processes (HIDP) document is to provide human-systems integration design processes, including methodologies and best practices that NASA has used to meet human systems and human rating requirements for developing crewed spacecraft. HIDP content is framed around human-centered design methodologies and processes in support of human-system integration requirements and human rating. NASA-STD-3001, Space Flight Human-System Standard, is a two-volume set of National Aeronautics and Space Administration (NASA) Agency-level standards established by the Office of the Chief Health and Medical Officer, directed at minimizing health and performance risks for flight crews in human space flight programs. Volume 1 of NASA-STD-3001, Crew Health, sets standards for fitness for duty, space flight permissible exposure limits, permissible outcome limits, levels of medical care, medical diagnosis, intervention, treatment and care, and countermeasures. Volume 2 of NASASTD- 3001, Human Factors, Habitability, and Environmental Health, focuses on human physical and cognitive capabilities and limitations and defines standards for spacecraft (including orbiters, habitats, and suits), internal environments, facilities, payloads, and related equipment, hardware, and software with which the crew interfaces during space operations. The NASA Procedural Requirements (NPR) 8705.2B, Human-Rating Requirements for Space Systems, specifies the Agency's human-rating processes, procedures, and requirements. The HIDP was written to share NASA's knowledge of processes directed toward achieving human certification of a spacecraft through implementation of human-systems integration requirements. Although the HIDP speaks directly to implementation of NASA-STD-3001 and NPR 8705.2B requirements, the human-centered design, evaluation, and design processes described in this document can be applied to any set of human-systems requirements and are independent of reference missions. The HIDP is a reference document that is intended to be used during the development of crewed space systems and operations to guide human-systems development process activities.

[Global immunization policies and recommendations: objectives and process].

PubMed

Duclos, Philippe; Okwo-Bele, Jean-Marie

2007-04-01

The World Health Organization (WHO) has a dual mandate of providing global policies, standards and norms as well as support for member countries in applying such policies and standards to national programmes with the aim to improve health. The vaccine world is changing and with it the demands and expectations of the global and national policy makers, donors, and other interested parties. Changes pertain to : new vaccines and technologies developments, vaccine safety issues, regulation and approval of vaccines, and increased funding flowing through new financing mechanisms. This places a special responsibility on WHO to respond effectively. WHO has recently reviewed and optimized its policy making structure for vaccines and immunization and adjusted it to the new Global Immunization Vision and Strategy, which broadens the scope of immunization efforts to all age groups and vaccines with emphasis on integration of immunization delivery with other health interventions. This includes an extended consultation process to promptly generate evidence base recommendations, ensuring transparency of the decision making process and added communication efforts. This article presents the objectives and impact of the process set to develop global immunization policies, norms, standards and recommendations. The key advisory committees landscape contributing to this process is described. This includes the Strategic Advisory Group of Experts, the Global Advisory Committee on Vaccine Safety and the Expert Committee on Biological Standardization. The elaboration of WHO vaccine position papers is also described.

The OSHA standard setting process: role of the occupational health nurse.

PubMed

Klinger, C S; Jones, M L

1994-08-01

1. Occupational health nurses are the health professionals most often involved with the worker who suffers as a result of ineffective or non-existent safety and health standards. 2. Occupational health nurses are familiar with health and safety standards, but may not understand or participate in the rulemaking process used to develop them. 3. Knowing the eight basic steps of rulemaking and actively participating in the process empowers occupational health nurses to influence national policy decisions affecting the safety and health of millions of workers. 4. By actively participating in rulemaking activities, occupational health nurses also improve the quality of occupational health nursing practice and enhance the image of the nursing profession.

Re-engineering Nascom's network management architecture

NASA Technical Reports Server (NTRS)

Drake, Brian C.; Messent, David

1994-01-01

The development of Nascom systems for ground communications began in 1958 with Project Vanguard. The low-speed systems (rates less than 9.6 Kbs) were developed following existing standards; but, there were no comparable standards for high-speed systems. As a result, these systems were developed using custom protocols and custom hardware. Technology has made enormous strides since the ground support systems were implemented. Standards for computer equipment, software, and high-speed communications exist and the performance of current workstations exceeds that of the mainframes used in the development of the ground systems. Nascom is in the process of upgrading its ground support systems and providing additional services. The Message Switching System (MSS), Communications Address Processor (CAP), and Multiplexer/Demultiplexer (MDM) Automated Control System (MACS) are all examples of Nascom systems developed using standards such as, X-windows, Motif, and Simple Network Management Protocol (SNMP). Also, the Earth Observing System (EOS) Communications (Ecom) project is stressing standards as an integral part of its network. The move towards standards has produced a reduction in development, maintenance, and interoperability costs, while providing operational quality improvement. The Facility and Resource Manager (FARM) project has been established to integrate the Nascom networks and systems into a common network management architecture. The maximization of standards and implementation of computer automation in the architecture will lead to continued cost reductions and increased operational efficiency. The first step has been to derive overall Nascom requirements and identify the functionality common to all the current management systems. The identification of these common functions will enable the reuse of processes in the management architecture and promote increased use of automation throughout the Nascom network. The MSS, CAP, MACS, and Ecom projects have indicated the potential value of commercial-off-the-shelf (COTS) and standards through reduced cost and high quality. The FARM will allow the application of the lessons learned from these projects to all future Nascom systems.

On Logic and Standards for Structuring Documents

NASA Astrophysics Data System (ADS)

Eyers, David M.; Jones, Andrew J. I.; Kimbrough, Steven O.

The advent of XML has been widely seized upon as an opportunity to develop document representation standards that lend themselves to automated processing. This is a welcome development and much good has come of it. That said, present standardization efforts may be criticized on a number of counts. We explore two issues associated with document XML standardization efforts. We label them (i) the dynamic point and (ii) the logical point. Our dynamic point is that in many cases experience has shown that the search for a final, or even reasonably permanent, document representation standard is futile. The case is especially strong for electronic data interchange (EDI). Our logical point is that formalization into symbolic logic is materially helpful for understanding and designing dynamic document standards.

Reporting standards for studies of diagnostic test accuracy in dementia

PubMed Central

Noel-Storr, Anna H.; McCleery, Jenny M.; Richard, Edo; Ritchie, Craig W.; Flicker, Leon; Cullum, Sarah J.; Davis, Daniel; Quinn, Terence J.; Hyde, Chris; Rutjes, Anne W.S.; Smailagic, Nadja; Marcus, Sue; Black, Sandra; Blennow, Kaj; Brayne, Carol; Fiorivanti, Mario; Johnson, Julene K.; Köpke, Sascha; Schneider, Lon S.; Simmons, Andrew; Mattsson, Niklas; Zetterberg, Henrik; Bossuyt, Patrick M.M.; Wilcock, Gordon

2014-01-01

Objective: To provide guidance on standards for reporting studies of diagnostic test accuracy for dementia disorders. Methods: An international consensus process on reporting standards in dementia and cognitive impairment (STARDdem) was established, focusing on studies presenting data from which sensitivity and specificity were reported or could be derived. A working group led the initiative through 4 rounds of consensus work, using a modified Delphi process and culminating in a face-to-face consensus meeting in October 2012. The aim of this process was to agree on how best to supplement the generic standards of the STARD statement to enhance their utility and encourage their use in dementia research. Results: More than 200 comments were received during the wider consultation rounds. The areas at most risk of inadequate reporting were identified and a set of dementia-specific recommendations to supplement the STARD guidance were developed, including better reporting of patient selection, the reference standard used, avoidance of circularity, and reporting of test-retest reliability. Conclusion: STARDdem is an implementation of the STARD statement in which the original checklist is elaborated and supplemented with guidance pertinent to studies of cognitive disorders. Its adoption is expected to increase transparency, enable more effective evaluation of diagnostic tests in Alzheimer disease and dementia, contribute to greater adherence to methodologic standards, and advance the development of Alzheimer biomarkers. PMID:24944261

Standards of care and quality indicators for multidisciplinary care models for psoriatic arthritis in Spain.

PubMed

Gratacós, Jordi; Luelmo, Jesús; Rodríguez, Jesús; Notario, Jaume; Marco, Teresa Navío; de la Cueva, Pablo; Busquets, Manel Pujol; Font, Mercè García; Joven, Beatriz; Rivera, Raquel; Vega, Jose Luis Alvarez; Álvarez, Antonio Javier Chaves; Parera, Ricardo Sánchez; Carrascosa, Jose Carlos Ruiz; Martínez, Fernando José Rodríguez; Sánchez, José Pardo; Olmos, Carlos Feced; Pujol, Conrad; Galindez, Eva; Barrio, Silvia Pérez; Arana, Ana Urruticoechea; Hergueta, Mercedes; Coto, Pablo; Queiro, Rubén

2018-06-01

To define and give priority to standards of care and quality indicators of multidisciplinary care for patients with psoriatic arthritis (PsA). A systematic literature review on PsA standards of care and quality indicators was performed. An expert panel of rheumatologists and dermatologists who provide multidisciplinary care was established. In a consensus meeting group, the experts discussed and developed the standards of care and quality indicators and graded their priority, agreement and also the feasibility (only for quality indicators) following qualitative methodology and a Delphi process. Afterwards, these results were discussed with 2 focus groups, 1 with patients, another with health managers. A descriptive analysis is presented. We obtained 25 standards of care (9 of structure, 9 of process, 7 of results) and 24 quality indicators (2 of structure, 5 of process, 17 of results). Standards of care include relevant aspects in the multidisciplinary care of PsA patients like an appropriate physical infrastructure and technical equipment, the access to nursing care, labs and imaging techniques, other health professionals and treatments, or the development of care plans. Regarding quality indicators, the definition of multidisciplinary care model objectives and referral criteria, the establishment of responsibilities and coordination among professionals and the active evaluation of patients and data collection were given a high priority. Patients considered all of them as important. This set of standards of care and quality indicators for the multidisciplinary care of patients with PsA should help improve quality of care in these patients.

Knowledge Management Orientation: An Innovative Perspective to Hospital Management.

PubMed

Ghasemi, Matina; Ghadiri Nejad, Mazyar; Bagzibagli, Kemal

2017-12-01

By considering innovation as a new project in hospitals, all the project management's standard steps should be followed in execution. This study investigated the validation of a new set of measures in terms of providing a procedure for knowledge management-oriented innovation that enriches the hospital management system. The relation between innovation and all the knowledge management areas, as the main constructs of project management, was illustrated by referring to project management standard steps and previous studies. Through consultations and meetings with a committee of professional project managers, a questionnaire was developed to measure ten knowledge management areas in hospital's innovation process. Additionally, a group of experts from hospital managers were invited to comment on the applicability of the questionnaires by considering if the items are measurable in hospitals practically. A close-ended, Likert-type scale items, consisted of ten sections, were developed based on project management body of knowledge thorough Delphi technique. It enables the managers to evaluate hospitals' situation to be aware whether the organization follows the knowledge management standards in innovation process or not. By pilot study, confirmatory factor analysis and exploratory factor analysis were conducted to ensure the validity and reliability of the measurement items. The developed items seem to have a potential to help hospital managers and subsequently delivering new products/services successfully based on the standard procedures in their organization. In all innovation processes, the knowledge management areas and their standard steps help hospital managers by a new tool as questionnaire format.

A conceptual prediction model for seasonal drought processes using atmospheric and oceanic standardized anomalies: application to regional drought processes in China

NASA Astrophysics Data System (ADS)

Liu, Zhenchen; Lu, Guihua; He, Hai; Wu, Zhiyong; He, Jian

2018-01-01

Reliable drought prediction is fundamental for water resource managers to develop and implement drought mitigation measures. Considering that drought development is closely related to the spatial-temporal evolution of large-scale circulation patterns, we developed a conceptual prediction model of seasonal drought processes based on atmospheric and oceanic standardized anomalies (SAs). Empirical orthogonal function (EOF) analysis is first applied to drought-related SAs at 200 and 500 hPa geopotential height (HGT) and sea surface temperature (SST). Subsequently, SA-based predictors are built based on the spatial pattern of the first EOF modes. This drought prediction model is essentially the synchronous statistical relationship between 90-day-accumulated atmospheric-oceanic SA-based predictors and SPI3 (3-month standardized precipitation index), calibrated using a simple stepwise regression method. Predictor computation is based on forecast atmospheric-oceanic products retrieved from the NCEP Climate Forecast System Version 2 (CFSv2), indicating the lead time of the model depends on that of CFSv2. The model can make seamless drought predictions for operational use after a year-to-year calibration. Model application to four recent severe regional drought processes in China indicates its good performance in predicting seasonal drought development, despite its weakness in predicting drought severity. Overall, the model can be a worthy reference for seasonal water resource management in China.

Longitudinal Processing Speed Impairments in Males with Autism and the Effects of White Matter Microstructure

PubMed Central

Travers, Brittany G.; Bigler, Erin D.; Tromp, Do P. M.; Adluru, Nagesh; Froehlich, Alyson L.; Ennis, Chad; Lange, Nicholas; Nielsen, Jared A.; Prigge, Molly B. D.; Alexander, Andrew L.; Lainhart, Janet E.

2014-01-01

The present study used an accelerated longitudinal design to examine group differences and age-related changes in processing speed in 81 individuals with Autism Spectrum Disorder (ASD) compared to 56 age-matched individuals with typical development (ages 6–39 years). Processing speed was assessed using the Wechsler Intelligence Scale for Children-3rd edition (WISC-III) and the Wechsler Adult Intelligence Scale-3rd edition (WAIS-III). Follow-up analyses examined processing speed subtest performance and relations between processing speed and white matter microstructure (as measured with diffusion tensor imaging [DTI] in a subset of these participants). After controlling for full scale IQ, the present results show that processing speed index standard scores were on average 12 points lower in the group with ASD compared to the group with typical development. There were, however, no significant group differences in standard score age-related changes within this age range. For subtest raw scores, the group with ASD demonstrated robustly slower processing speeds in the adult versions of the IQ test (i.e., WAIS-III) but not in the child versions (WISC-III), even though age-related changes were similar in both the ASD and typically developing groups. This pattern of results may reflect difficulties that become increasingly evident in ASD on more complex measures of processing speed. Finally, DTI measures of whole-brain white matter microstructure suggested that fractional anisotropy (but not mean diffusivity, radial diffusivity, or axial diffusivity) made significant but small-sized contributions to processing speed standard scores across our entire sample. Taken together, the present findings suggest that robust decreases in processing speed may be present in ASD, more pronounced in adulthood, and partially attributable to white matter microstructural integrity. PMID:24269298

Final Report of the NASA Office of Safety and Mission Assurance Agile Benchmarking Team

NASA Technical Reports Server (NTRS)

Wetherholt, Martha

2016-01-01

To ensure that the NASA Safety and Mission Assurance (SMA) community remains in a position to perform reliable Software Assurance (SA) on NASAs critical software (SW) systems with the software industry rapidly transitioning from waterfall to Agile processes, Terry Wilcutt, Chief, Safety and Mission Assurance, Office of Safety and Mission Assurance (OSMA) established the Agile Benchmarking Team (ABT). The Team's tasks were: 1. Research background literature on current Agile processes, 2. Perform benchmark activities with other organizations that are involved in software Agile processes to determine best practices, 3. Collect information on Agile-developed systems to enable improvements to the current NASA standards and processes to enhance their ability to perform reliable software assurance on NASA Agile-developed systems, 4. Suggest additional guidance and recommendations for updates to those standards and processes, as needed. The ABT's findings and recommendations for software management, engineering and software assurance are addressed herein.

Ayurvedic hydro-alcoholic anti-asthmatic medicine Vasarishta built upon Mritasanjeevani Sura: Development and evaluation

PubMed Central

Wele, Asmita A.; Pendse, Nikhil U.; Takle, Shrikant P.; Burase, Raghunath V.; Patil, Sanjay V.; Bhalerao, Supriya; Harsulkar, Abhay M.

2015-01-01

Introduction: Vasarishta built upon Mritasanjeevani Sura (MS) is a polyherbal hydro-alcoholic anti-asthmatic formulation which is administered in a dose of 1 ml instead of standard dose 40 ml, generally advocated for any “Asava–Arishta” in Ayurveda. Aim: The present study was aimed at finding out rationale for the peculiar distillation process to manufacture MS followed by Sthapana process to make Vasarishta. It was further aimed to find out difference in Vasarishta samples manufactured by purely fermentation process and the peculiar method mentioned above. Materials and Methods: Three batches of MS and subsequently three batches of Vasarishta were prepared. Basic standardization and development of standard operating procedure for the same were achieved by doing pH, percentage of alcohol and total reducing sugar, specific gravity on both MS and Vasarishta, during and after completion of process. Finally, MS and Vasarishta (built upon MS) made in laboratory were compared with marketed samples of MS and Vasarishta using gas chromatography. Results: The types of alcohols and volatile acids in MS and Vasarishta, prepared in laboratory, are similar but the proportions differ, which is taken as an indicator of process standardization. Values of furfural, ethyl acetate, and 1-butanol in lab samples are within permissible limits as against the values of the market samples. Conclusions: The textual process for the production of Vasarishta proved to produce organoleptically acceptable product which is virtually free of toxic compounds such as furfural. PMID:27313419

Analysis of the Integration of Skill Standards into Community College Curriculum

ERIC Educational Resources Information Center

Aragon, Steven R.; Woo, Hui-Jeong; Marvel, Matthew R.

2004-01-01

The utilization of skill standards in the curriculum development process has become an increasingly prominent aspect of the reform movement in career and technical education over the past 10 years. Standards are seen as a way to achieve better accountability within Career and Technical Education (CTE) systems, and improve their quality as well as…

The Problem of Correspondence of Educational and Professional Standards (Results of Empirical Research)

ERIC Educational Resources Information Center

Piskunova, Elena; Sokolova, Irina; Kalimullin, Aydar

2016-01-01

In the article, the problem of correspondence of educational standards of higher pedagogical education and teacher professional standards in Russia is actualized. Modern understanding of the quality of vocational education suggests that in the process of education the student develops a set of competencies that will enable him or her to carry out…

Opportunity Knocks! Inquiry, the New National Social Studies and Science Standards, and You

ERIC Educational Resources Information Center

Ratzer, Mary Boyd

2014-01-01

To be recognized and adopted, the promise and potential of national standards must validate the instructional role of the school librarian and build formative knowledge through authentic process and products. Inquiry is a direct link to those dimensions. Standards that are rigorous and relevant optimize the developing brain's affinity for building…

Developing Knowledgeable Teachers: A Framework for Standards-Based Teacher Education Supported by Institutional Collaboration. The STEP Reports.

ERIC Educational Resources Information Center

Garvin, Patty, Ed.

This collection of papers describes the process of creating a standards-based teacher education program through strong collaboration among arts and science, education, and P-12 faculty members and administrators. The Standards-based Teacher Education Project (STEP) was designed to help teacher education programs ensure that their graduates know…

A Proven Method for Meeting Export Control Objectives in Postal and Shipping Sectors

DTIC Science & Technology

2015-02-01

months, the USPIS team developed and implemented an export screening standard operating procedure, implemented new and updated processes and systems ...support and protect the U.S. Postal Service and its employees, infrastructure, and customers; enforce the laws that defend the nation’s mail system ...the incidence of mail shipments violating export control laws, regulations, and standards . • Evaluate current processes and systems and identify

Advances in Geoscience Modeling: Smart Modeling Frameworks, Self-Describing Models and the Role of Standardized Metadata

NASA Astrophysics Data System (ADS)

Peckham, Scott

2016-04-01

Over the last decade, model coupling frameworks like CSDMS (Community Surface Dynamics Modeling System) and ESMF (Earth System Modeling Framework) have developed mechanisms that make it much easier for modelers to connect heterogeneous sets of process models in a plug-and-play manner to create composite "system models". These mechanisms greatly simplify code reuse, but must simultaneously satisfy many different design criteria. They must be able to mediate or compensate for differences between the process models, such as their different programming languages, computational grids, time-stepping schemes, variable names and variable units. However, they must achieve this interoperability in a way that: (1) is noninvasive, requiring only relatively small and isolated changes to the original source code, (2) does not significantly reduce performance, (3) is not time-consuming or confusing for a model developer to implement, (4) can very easily be updated to accommodate new versions of a given process model and (5) does not shift the burden of providing model interoperability to the model developers. In tackling these design challenges, model framework developers have learned that the best solution is to provide each model with a simple, standardized interface, i.e. a set of standardized functions that make the model: (1) fully-controllable by a caller (e.g. a model framework) and (2) self-describing with standardized metadata. Model control functions are separate functions that allow a caller to initialize the model, advance the model's state variables in time and finalize the model. Model description functions allow a caller to retrieve detailed information on the model's input and output variables, its computational grid and its timestepping scheme. If the caller is a modeling framework, it can use the self description functions to learn about each process model in a collection to be coupled and then automatically call framework service components (e.g. regridders, time interpolators and unit converters) as necessary to mediate the differences between them so they can work together. This talk will first review two key products of the CSDMS project, namely a standardized model interface called the Basic Model Interface (BMI) and the CSDMS Standard Names. The standard names are used in conjunction with BMI to provide a semantic matching mechanism that allows output variables from one process model or data set to be reliably used as input variables to other process models in a collection. They include not just a standardized naming scheme for model variables, but also a standardized set of terms for describing the attributes and assumptions of a given model. Recent efforts to bring powerful uncertainty analysis and inverse modeling toolkits such as DAKOTA into modeling frameworks will also be described. This talk will conclude with an overview of several related modeling projects that have been funded by NSF's EarthCube initiative, namely the Earth System Bridge, OntoSoft and GeoSemantics projects.

CR softcopy display presets based on optimum visualization of specific findings

NASA Astrophysics Data System (ADS)

Andriole, Katherine P.; Gould, Robert G.; Webb, W. R.

1999-07-01

The purpose of this research is to assess the utility of providing presets for computed radiography (CR) softcopy display, based not on the window/level settings, but on image processing applied to the image based on optimization for visualization of specific findings, pathologies, etc. Clinical chest images are acquired using an Agfa ADC 70 CR scanner, and transferred over the PACS network to an image processing station which has the capability to perform multiscale contrast equalization. The optimal image processing settings per finding are developed in conjunction with a thoracic radiologist by manipulating the multiscale image contrast amplification algorithm parameters. Softcopy display of images processed with finding-specific settings are compared with the standard default image presentation for fifty cases of each category. Comparison is scored using a five point scale with positive one and two denoting the standard presentation is preferred over the finding-specific presets, negative one and two denoting the finding-specific preset is preferred over the standard presentation, and zero denoting no difference. Presets have been developed for pneumothorax and clinical cases are currently being collected in preparation for formal clinical trials. Subjective assessments indicate a preference for the optimized-preset presentation of images over the standard default, particularly by inexperienced radiology residents and referring clinicians.

New method for rapid testing of bond strength for wood adhesives

Treesearch

James M. Wescott; Michael J. Birkeland; Amy E. Traska; Charles R. Frihart; Brice N. Dally

2007-01-01

In developing new adhesives for wood bonding, the testing of bond performance can often be a limiting factor in the development process. Evaluating the bond performance of an adhesive that can be prepared in less than a day often takes several days using standard performance tests. This testing slows the development process and may cause a company to abandon a...

Assurance specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 4

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the fourth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for assurance documentation for information systems and software, hardware, and operational procedures components, and related processes. The specifications are developed in conjunction with the corresponding management plans specifying the assurance activities to be performed.

Management control and status reports documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 5

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the fifth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for management control and status reports used in monitoring and controlling the management, development, and assurance of informations systems and software, hardware, and operational procedures components, and related processes.

Center/TRACON Automation System: Development and Evaluation in the Field

DOT National Transportation Integrated Search

1993-10-01

Technological advances are changing the way that advanced air traffic control : automation should be developed and assessed. Current standards and practices of : system development place field testing at the end of the development process. : While su...

7 CFR 51.1865 - Mature.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... ripening process, and that the contents of two or more seed cavities have developed a jelly-like...

7 CFR 51.1865 - Mature.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... ripening process, and that the contents of two or more seed cavities have developed a jelly-like...

Research and development of a safety standard for workstation tables in the United States

DOT National Transportation Integrated Search

2013-02-21

The US safety standard for workstation tables is presented to an international audience, : such that rail operators and equipment manufacturers may better understand the research : behind the requirements, the process through which the safety standar...

NDE standards for high temperature materials

NASA Technical Reports Server (NTRS)

Vary, Alex

1991-01-01

High temperature materials include monolithic ceramics for automotive gas turbine engines and also metallic/intermetallic and ceramic matrix composites for a range of aerospace applications. These are materials that can withstand extreme operating temperatures that will prevail in advanced high-efficiency gas turbine engines. High temperature engine components are very likely to consist of complex composite structures with three-dimensionality interwoven and various intermixed ceramic fibers. The thermomechanical properties of components made of these materials are actually created in-place during processing and fabrication stages. The complex nature of these new materials creates strong incentives for exact standards for unambiguous evaluations of defects and microstructural characteristics. NDE techniques and standards that will ultimately be applicable to production and quality control of high temperature materials and structures are still emerging. The needs range from flaw detection to below 100 micron levels in monolithic ceramics to global imaging of fiber architecture and matrix densification anomalies in composites. The needs are different depending on the processing stage, fabrication method, and nature of the finished product. The standards are discussed that must be developed in concert with advances in NDE technology, materials processing research, and fabrication development. High temperature materials and structures that fail to meet stringent specifications and standards are unlikely to compete successfully either technologically or in international markets.

Development of the private practice management standards for psychology.

PubMed

Mathews, Rebecca; Stokes, David; Littlefield, Lyn; Collins, Leah

2011-01-01

This paper describes the process of developing a set of private practice management standards to support Australian psychologists and promote high quality services to the public. A review of the literature was conducted to identify management standards relevant to psychology, which were further developed in consultation with a panel of experts in psychology or in the development of standards. Forty-three psychologists in independent private practice took part in either a survey (n=22) to provide feedback on the relevance of, and their compliance with, the identified standards, or a 6-month pilot study (n=21) in which a web-based self-assessment instrument evaluating the final set of standards and performance indicators was implemented in their practice to investigate self-reported change in management procedures. The pilot study demonstrated good outcomes for practitioners when evaluation of compliance to the standards was operationalized in a self-assessment format. Study results are based on a small sample size. Nevertheless, relevance and utility of the standards was found providing an initial version of management standards that have relevance to the practice of psychology in Australia, along with a system for evaluating psychological service provision to ensure best practice in service delivery. © 2010 National Association for Healthcare Quality.

ISBT 128 Standard for Coding Medical Products of Human Origin

PubMed Central

Ashford, Paul; Delgado, Matthew

2017-01-01

Background ISBT 128 is an international standard for the terminology, coding, labeling, and identification of medical products of human origin (MPHO). Full implementation of ISBT 128 improves traceability, transparency, vigilance and surveillance, and interoperability. Methods ICCBBA maintains the ISBT 128 standard through the activities of a network of expert volunteers, including representatives from professional scientific societies, governments and users, to standardize and maintain MPHO identification. These individuals are organized into Technical Advisory Groups and work within a structured framework as part of a quality-controlled standards development process. Results The extensive involvement of international scientific and professional societies in the development of the standard has ensured that ISBT 128 has gained widespread recognition. The user community has developed confidence in the ability of the standard to adapt to new developments in their fields of interest. The standard is fully compatible with Single European Code requirements for tissues and cells and is utilized by many European tissue establishments. ISBT 128's flexibility and robustness has allowed for expansions into subject areas such as cellular therapy, regenerative medicine, and tissue banking. Conclusion ISBT 128 is the internationally recognized standard for coding MPHO and has gained widespread use globally throughout the past two decades. PMID:29344013

Pollution prevention options to meet impending MACT standards: A compendium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berglund, R.L.; Pickron, J.S.

1997-12-31

Under the Clean Air Act Amendments of 1990, the EPA was charged with developing MACT standards for a large group of operations representing a variety of different industry categories. While pollution prevention opportunities for meeting the requirements of the HON standards for the synthetic organic chemical manufacturing industry (SOCMI) and similar standards for the refining industry have drawn significant discussion and attention, little guidance for considering pollution prevention options for meeting other MACT standards have been provided. Yet, in working with companies to meet the requirements of proposed MACT standards for the shipbuilding, wood processing, plastics and gas processing industries,more » a number of pollution prevention opportunities for meeting these requirements were identified in early compliance strategies. This paper will provide a compendium of pollution prevention options for meeting these and other proposed and promulgated MACT standards.« less

Utilization of a Clinical Trial Management System for the Whole Clinical Trial Process as an Integrated Database: System Development.

PubMed

Park, Yu Rang; Yoon, Young Jo; Koo, HaYeong; Yoo, Soyoung; Choi, Chang-Min; Beck, Sung-Ho; Kim, Tae Won

2018-04-24

Clinical trials pose potential risks in both communications and management due to the various stakeholders involved when performing clinical trials. The academic medical center has a responsibility and obligation to conduct and manage clinical trials while maintaining a sufficiently high level of quality, therefore it is necessary to build an information technology system to support standardized clinical trial processes and comply with relevant regulations. The objective of the study was to address the challenges identified while performing clinical trials at an academic medical center, Asan Medical Center (AMC) in Korea, by developing and utilizing a clinical trial management system (CTMS) that complies with standardized processes from multiple departments or units, controlled vocabularies, security, and privacy regulations. This study describes the methods, considerations, and recommendations for the development and utilization of the CTMS as a consolidated research database in an academic medical center. A task force was formed to define and standardize the clinical trial performance process at the site level. On the basis of the agreed standardized process, the CTMS was designed and developed as an all-in-one system complying with privacy and security regulations. In this study, the processes and standard mapped vocabularies of a clinical trial were established at the academic medical center. On the basis of these processes and vocabularies, a CTMS was built which interfaces with the existing trial systems such as the electronic institutional review board health information system, enterprise resource planning, and the barcode system. To protect patient data, the CTMS implements data governance and access rules, and excludes 21 personal health identifiers according to the Health Insurance Portability and Accountability Act (HIPAA) privacy rule and Korean privacy laws. Since December 2014, the CTMS has been successfully implemented and used by 881 internal and external users for managing 11,645 studies and 146,943 subjects. The CTMS was introduced in the Asan Medical Center to manage the large amounts of data involved with clinical trial operations. Inter- and intraunit control of data and resources can be easily conducted through the CTMS system. To our knowledge, this is the first CTMS developed in-house at an academic medical center side which can enhance the efficiency of clinical trial management in compliance with privacy and security laws. ©Yu Rang Park, Young Jo Yoon, HaYeong Koo, Soyoung Yoo, Chang-Min Choi, Sung-Ho Beck, Tae Won Kim. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 24.04.2018.

Evolutionary Software Development (Developpement Evolutionnaire de Logiciels)

DTIC Science & Technology

2008-08-01

development processes. While this may be true, frequently it is not. MIL-STD-498 was explicitly introduced to encourage iterative development; ISO /IEC... 12207 was carefully worded not to prohibit iterative development. Yet both standards were widely interpreted as requiring waterfall development, as

Evolutionary Software Development (Developpement evolutionnaire de logiciels)

DTIC Science & Technology

2008-08-01

development processes. While this may be true, frequently it is not. MIL-STD-498 was explicitly introduced to encourage iterative development; ISO /IEC... 12207 was carefully worded not to prohibit iterative development. Yet both standards were widely interpreted as requiring waterfall development, as

USE OF COMPUTER-AIDED PROCESS ENGINEERING TOOL IN POLLUTION PREVENTION

EPA Science Inventory

Computer-Aided Process Engineering has become established in industry as a design tool. With the establishment of the CAPE-OPEN software specifications for process simulation environments. CAPE-OPEN provides a set of "middleware" standards that enable software developers to acces...

International standards for programmes of training in intensive care medicine in Europe.

PubMed

2011-03-01

To develop internationally harmonised standards for programmes of training in intensive care medicine (ICM). Standards were developed by using consensus techniques. A nine-member nominal group of European intensive care experts developed a preliminary set of standards. These were revised and refined through a modified Delphi process involving 28 European national coordinators representing national training organisations using a combination of moderated discussion meetings, email, and a Web-based tool for determining the level of agreement with each proposed standard, and whether the standard could be achieved in the respondent's country. The nominal group developed an initial set of 52 possible standards which underwent four iterations to achieve maximal consensus. All national coordinators approved a final set of 29 standards in four domains: training centres, training programmes, selection of trainees, and trainers' profiles. Only three standards were considered immediately achievable by all countries, demonstrating a willingness to aspire to quality rather than merely setting a minimum level. Nine proposed standards which did not achieve full consensus were identified as potential candidates for future review. This preliminary set of clearly defined and agreed standards provides a transparent framework for assuring the quality of training programmes, and a foundation for international harmonisation and quality improvement of training in ICM.

[Method for the quality assessment of data collection processes in epidemiological studies].

PubMed

Schöne, G; Damerow, S; Hölling, H; Houben, R; Gabrys, L

2017-10-01

For a quantitative evaluation of primary data collection processes in epidemiological surveys based on accompaniments and observations (in the field), there is no description of test criteria and methodologies in relevant literature and thus no known application in practice. Therefore, methods need to be developed and existing procedures adapted. The aim was to identify quality-relevant developments within quality dimensions by means of inspection points (quality indicators) during the process of data collection. As a result we seek to implement and establish a methodology for the assessment of overall survey quality supplementary to standardized data analyses. Monitors detect deviations from standard primary data collection during site visits by applying standardized checklists. Quantitative results - overall and for each dimension - are obtained by numerical calculation of quality indicators. Score results are categorized and color coded. This visual prioritization indicates necessity for intervention. The results obtained give clues regarding the current quality of data collection. This allows for the identification of such sections where interventions for quality improvement are needed. In addition, process quality development can be shown over time on an intercomparable basis. This methodology for the evaluation of data collection quality can identify deviations from norms, focalize quality analyses and help trace causes for significant deviations.

Software handlers for process interfaces

NASA Technical Reports Server (NTRS)

Bercaw, R. W.

1976-01-01

The principles involved in the development of software handlers for custom interfacing problems are discussed. Handlers for the CAMAC standard are examined in detail. The types of transactions that must be supported have been established by standards groups, eliminating conflicting requirements arising out of different design philosophies and applications. Implementation of the standard handlers has been facilititated by standardization of hardware. The necessary local processors can be placed in the handler when it is written or at run time by means of input/output directives, or they can be built into a high-performance input/output processor. The full benefits of these process interfaces will only be realized when software requirements are incorporated uniformly into the hardware.

Modernized Techniques for Dealing with Quality Data and Derived Products

NASA Astrophysics Data System (ADS)

Neiswender, C.; Miller, S. P.; Clark, D.

2008-12-01

"I just want a picture of the ocean floor in this area" is expressed all too often by researchers, educators, and students in the marine geosciences. As more sophisticated systems are developed to handle data collection and processing, the demand for quality data, and standardized products continues to grow. Data management is an invisible bridge between science and researchers/educators. The SIOExplorer digital library presents more than 50 years of ocean-going research. Prior to publication, all data is checked for quality using standardized criterion developed for each data stream. Despite the evolution of data formats and processing systems, SIOExplorer continues to present derived products in well- established formats. Standardized products are published for each cruise, and include a cruise report, MGD77 merged data, multi-beam flipbook, and underway profiles. Creation of these products is made possible by processing scripts, which continue to change with ever-evolving data formats. We continue to explore the potential of database-enabled creation of standardized products, such as the metadata-rich MGD77 header file. Database-enabled, automated processing produces standards-compliant metadata for each data and derived product. Metadata facilitates discovery and interpretation of published products. This descriptive information is stored both in an ASCII file, and a searchable digital library database. SIOExplorer's underlying technology allows focused search and retrieval of data and products. For example, users can initiate a search of only multi-beam data, which includes data-specific parameters. This customization is made possible with a synthesis of database, XML, and PHP technology. The combination of standardized products and digital library technology puts quality data and derived products in the hands of scientists. Interoperable systems enable distribution these published resources using technology such as web services. By developing modernized strategies to deal with data, Scripps Institution of Oceanography is able to produce and distribute well-formed, and quality-tested derived products, which aid research, understanding, and education.

Building the United States National Vegetation Classification

USGS Publications Warehouse

Franklin, S.B.; Faber-Langendoen, D.; Jennings, M.; Keeler-Wolf, T.; Loucks, O.; Peet, R.; Roberts, D.; McKerrow, A.

2012-01-01

The Federal Geographic Data Committee (FGDC) Vegetation Subcommittee, the Ecological Society of America Panel on Vegetation Classification, and NatureServe have worked together to develop the United States National Vegetation Classification (USNVC). The current standard was accepted in 2008 and fosters consistency across Federal agencies and non-federal partners for the description of each vegetation concept and its hierarchical classification. The USNVC is structured as a dynamic standard, where changes to types at any level may be proposed at any time as new information comes in. But, because much information already exists from previous work, the NVC partners first established methods for screening existing types to determine their acceptability with respect to the 2008 standard. Current efforts include a screening process to assign confidence to Association and Group level descriptions, and a review of the upper three levels of the classification. For the upper levels especially, the expectation is that the review process includes international scientists. Immediate future efforts include the review of remaining levels and the development of a proposal review process.

Developments in Hollow Graphite Fiber Technology

NASA Technical Reports Server (NTRS)

Stallcup, Michael; Brantley, Lott W., Jr. (Technical Monitor)

2002-01-01

Hollow graphite fibers will be lighter than standard solid graphite fibers and, thus, will save weight in optical components. This program will optimize the processing and properties of hollow carbon fibers developed by MER and to scale-up the processing to produce sufficient fiber for fabricating a large ultra-lightweight mirror for delivery to NASA.

Developing a Web-Based Hiring Resource at a State Medical College

ERIC Educational Resources Information Center

Drane, Daniel, III

2017-01-01

This study uses a sequential, mixed method, action research, quantitative to qualitative research design. The purpose of this study was to develop a useful standardized hiring process at a state medical college that brings clarity to the hiring process and policies. Two conceptual frameworks guided the innovations in this study--communities of…

A Process for Developing and Articulating Learning Goals or Competencies for Social and Emotional Learning

ERIC Educational Resources Information Center

Yoder, Nick; Dusenbury, Linda

2017-01-01

Developing and articulating clear goals for student social and emotional learning (SEL) involves a number of important steps. This document focuses specifically on the articulation of learning goals (sometimes called "competencies" or "standards" in state and district policy) and suggests a process for those state teams that…

Formative Assessment in Practice: A Process of Inquiry and Action

ERIC Educational Resources Information Center

Heritage, Margaret

2013-01-01

Margaret Heritage presents a practical guide to formative assessment as a process of "inquiry and action" essential to twenty-first century learning. In the wake of the development of the Common Core standards and the effort to develop the appropriate assessments to accompany them, formative assessment has attracted increasing attention…

Applying emerging digital video interface standards to airborne avionics sensor and digital map integrations: benefits outweigh the initial costs

NASA Astrophysics Data System (ADS)

Kuehl, C. Stephen

1996-06-01

Video signal system performance can be compromised in a military aircraft cockpit management system (CMS) with the tailoring of vintage Electronics Industries Association (EIA) RS170 and RS343A video interface standards. Video analog interfaces degrade when induced system noise is present. Further signal degradation has been traditionally associated with signal data conversions between avionics sensor outputs and the cockpit display system. If the CMS engineering process is not carefully applied during the avionics video and computing architecture development, extensive and costly redesign will occur when visual sensor technology upgrades are incorporated. Close monitoring and technical involvement in video standards groups provides the knowledge-base necessary for avionic systems engineering organizations to architect adaptable and extendible cockpit management systems. With the Federal Communications Commission (FCC) in the process of adopting the Digital HDTV Grand Alliance System standard proposed by the Advanced Television Systems Committee (ATSC), the entertainment and telecommunications industries are adopting and supporting the emergence of new serial/parallel digital video interfaces and data compression standards that will drastically alter present NTSC-M video processing architectures. The re-engineering of the U.S. Broadcasting system must initially preserve the electronic equipment wiring networks within broadcast facilities to make the transition to HDTV affordable. International committee activities in technical forums like ITU-R (former CCIR), ANSI/SMPTE, IEEE, and ISO/IEC are establishing global consensus on video signal parameterizations that support a smooth transition from existing analog based broadcasting facilities to fully digital computerized systems. An opportunity exists for implementing these new video interface standards over existing video coax/triax cabling in military aircraft cockpit management systems. Reductions in signal conversion processing steps, major improvement in video noise reduction, and an added capability to pass audio/embedded digital data within the digital video signal stream are the significant performance increases associated with the incorporation of digital video interface standards. By analyzing the historical progression of military CMS developments, establishing a systems engineering process for CMS design, tracing the commercial evolution of video signal standardization, adopting commercial video signal terminology/definitions, and comparing/contrasting CMS architecture modifications using digital video interfaces; this paper provides a technical explanation on how a systems engineering process approach to video interface standardization can result in extendible and affordable cockpit management systems.

REddyProc: Enabling researchers to process Eddy-Covariance data

NASA Astrophysics Data System (ADS)

Wutzler, Thomas; Moffat, Antje; Migliavacca, Mirco; Knauer, Jürgen; Menzer, Olaf; Sickel, Kerstin; Reichstein, Markus

2017-04-01

Analysing Eddy-Covariance measurements involves extensive processing, which puts technical labour to researchers. There is a need to overcome difficulties in data processing associated with deploying, adapting and using existing software and online tools. We tackled that need by developing the REddyProc package in the open source cross-platform language R that provides standard processing routines for reading half-hourly files from different formats, including from the recently released FLUXNET 2015 dataset, uStar threshold estimation and associated uncertainty, gap-filling, flux partitioning (both night-time or daytime based), and visualization of results. Although different in some features, the package mimics the online tool that has been extensively used by many users and site Principal Investigators (PIs) in the last years, and available on the website of the Max Planck Institute for Biogeochemistry. Generally, REddyProc results are statistically equal to results based on the state-of the art tools. The provided routines can be easily installed, configured, used, and integrated with further analysis. Hence the eddy covariance community will benefit from using the provided package allowing easier integration of standard processing with extended analysis. This complements activities by AmeriFlux, ICOS, NEON, and other regional networks for developing codes for standardized data processing of multiple sites in FLUXNET.

STEM Gives Meaning to Mathematics

ERIC Educational Resources Information Center

Hefty, Lukas J.

2015-01-01

The National Council of Teachers of Mathematics' (NCTM's) "Principles and Standards for School Mathematics" (2000) outlines fi ve Process Standards that are essential for developing deep understanding of mathematics: (1) Problem Solving; (2) Reasoning and Proof; (3) Communication; (4) Connections; and (5) Representation. The Common Core…

Encoding Standards for Linguistic Corpora.

ERIC Educational Resources Information Center

Ide, Nancy

The demand for extensive reusability of large language text collections for natural languages processing research requires development of standardized encoding formats. Such formats must be capable of representing different kinds of information across the spectrum of text types and languages, capable of representing different levels of…

Gravitating Toward Reggio.

ERIC Educational Resources Information Center

Desouza, Josephine M. Shireen; Jereb, Jill

2000-01-01

Explains the process of teaching about force, inertia, gravity, and friction to kindergarten students using the Reggio Emilia Approach. Incorporates writing, reading, counting, building vocabulary, and developing science and social skills. Addresses the Science as Inquiry Content Standard A and Physical Science Content Standard B of the National…

Movie Mitosis

ERIC Educational Resources Information Center

Bogiages, Christopher; Hitt, Austin M.

2008-01-01

Mitosis and meiosis are essential for the growth, development, and reproduction of organisms. Because these processes are essential to life, both are emphasized in biology texts, state standards, and the National Science Education Standards. In this article, the authors present their methodology for teaching mitosis by having students produce…

Standards for Health Sciences Libraries.

ERIC Educational Resources Information Center

Stinson, E. Ray

1982-01-01

Discusses service standards (level of excellence or adequacy in performance of library service) and their incorporation in the accreditation process for hospital library service and academic health sciences libraries. The certification program developed for health sciences librarians by the Medical Library Association is reviewed. Fifty-nine…

Effective Electronic Security: Process for the Development and Validation from Requirements to Testing

DTIC Science & Technology

2013-06-01

ABBREVIATIONS ANSI American National Standards Institute ASIS American Society of Industrial Security CCTV Closed Circuit Television CONOPS...is globally recognized for the development and maintenance of standards. ASTM defines a specification as an explicit set of requirements...www.rkb.us/saver/. One of the SAVER reports titled CCTV Technology Handbook has a chapter on system design. The report uses terms like functional

Development of a viability standard curve for microencapsulated probiotic bacteria using confocal microscopy and image analysis software.

PubMed

Moore, Sarah; Kailasapathy, Kasipathy; Phillips, Michael; Jones, Mark R

2015-07-01

Microencapsulation is proposed to protect probiotic strains from food processing procedures and to maintain probiotic viability. Little research has described the in situ viability of microencapsulated probiotics. This study successfully developed a real-time viability standard curve for microencapsulated bacteria using confocal microscopy, fluorescent dyes and image analysis software. Copyright © 2015 Elsevier B.V. All rights reserved.

Lessons Learned on Quality (of) Standards

NASA Astrophysics Data System (ADS)

Gerlich, Rainer; Gerlich, Ralf

2011-08-01

Standards are used to describe and ensure the quality of products, services and processes throughout almost all branches of industry, including the field of software engineering. Contractors and suppliers are obligated by their customers and certification authorities to follow a certain set of standards during development. For example, a customer can easier actively participate in and control the contractor's process when enforcing a standard process..However, as with any requirement, a standard may also impede the contractor or supplier in assuring actual quality of the product in the sense of fitness for the purpose intended by the customer.This is the case when a standard defines specific quality assurance activities requiring a considerable amount of effort while other more efficient but equivalent or even superior approaches are blocked. Then improvement of the ratio between cost and quality exceeding miniscule advances is heavily impeded.While in some parts being too specific in defining the mechanisms of the enforced process, standards are sometimes too weak in defining the principles or goals on control of product quality.Therefore this paper addresses the following issues: (1) Which conclusions can be drawn on the quality and efficiency of a standard? (2) If and how is it possible to improve or evolve a standard? (3) How well does a standard guide a user towards high quality of the end product?One conclusion is that the analyzed standards do interfere with technological innovation, though the standards leave a lot of freedom for concretization and are understood as technology-independent.Another conclusion is that standards are not only a matter of quality but also a matter of competitiveness of the industry depending on resulting costs and time-to- market. When the costs induced by a standard are not adequate to the achievable quality, industry encounters a significant disadvantage.

Developing global health technology standards: what can other industries teach us?

PubMed Central

2013-01-01

Background There is a lack of effective and affordable technologies to address health needs in the developing world. One way to address problems of innovation and affordability is to design global health technologies to follow agreed-upon standards. This Debate article argues that we can better develop standards for global health technologies if we learn lessons from other industries. Discussion The article’s Background section begins by explaining why standards are needed in global health. For example, if global health technologies can be modularized into independent interfacing parts, these parts can then interact via well-defined standards in a “plug and play” fashion. This can avoid development of mutually incompatible solutions by different organizations, speed the pace of innovation, unlock health systems from single providers and approaches, and lower barriers to entry. The Background then gives a brief primer on standards and discusses incentives for health standards. The article’s Discussion section begins with brief relevant cases of standards development from other industries, including electricity, container shipping, CD standards, Universal Serial Bus (USB), and the Internet. It then explores lessons from these and other industries that suggest how to develop standards for global health technologies. The remainder of the Discussion considers intellectual property and regulatory issues and standards-based global health business models, and ends with a checklist of considerations for health standards development leaders. (The associated Additional file discusses observations from standards development for cell phones and semiconductors, as well as challenges in the standards development process itself.) Throughout the article, point-of-care diagnostics are used as an illustrative example. An initiative is already underway to explore standardized diagnostics platforms. Summary This Debate article aims to convince the reader that standards can benefit global health technologies if we learn lessons from other industries. The article draws from historical examples and the authors’ experiences to suggest principles, challenges, and opportunities in developing these standards. If implemented well, standardized platforms can lower barriers to entry, improve affordability, and create a vibrant ecosystem of innovative new global health technologies. PMID:24134866

Developing 21st century accreditation standards for teaching hospitals: the Taiwan experience.

PubMed

Huang, Chung-I; Wung, Cathy; Yang, Che-Ming

2009-12-15

The purpose of this study is to establish teaching hospital accreditation standards anew with the hope that Taiwan's teaching hospitals can live up to the expectations of our society and ensure quality teaching. The development process lasted two years, 2005-2006, and was separated into three stages. The first stage centered on leadership meetings and consensus building, the second on drafting the new standards with expert focus groups, and the third on a pilot study and subsequent revision. Our new teaching hospital accreditation standards have six categories and 95 standards as follows: educational resources (20 items), teaching and training plans and outcomes (42 items), research and results (9 items), development of clinical faculty and continuing education (8 items), academic exchanges and community education (8 items), and administration (8 items). The new standards have proven feasible and posed reasonable challenges in the pilot study. We hope the new standards will strengthen teaching and research, and improve the quality of hospital services at the same time.

Development of a standardized, citywide process for managing smart-pump drug libraries.

PubMed

Walroth, Todd A; Smallwood, Shannon; Arthur, Karen; Vance, Betsy; Washington, Alana; Staublin, Therese; Haslar, Tammy; Reddan, Jennifer G; Fuller, James

2018-06-15

Development and implementation of an interprofessional consensus-driven process for review and optimization of smart-pump drug libraries and dosing limits are described. The Indianapolis Coalition for Patient Safety (ICPS), which represents 6 Indianapolis-area health systems, identified an opportunity to reduce clinically insignificant alerts that smart infusion pumps present to end users. Through a consensus-driven process, ICPS aimed to identify best practices to implement at individual hospitals in order to establish specific action items for smart-pump drug library optimization. A work group of pharmacists, nurses, and industrial engineers met to evaluate variability within and lack of scrutiny of smart-pump drug libraries. The work group used Lean Six Sigma methodologies to generate a list of key needs and barriers to be addressed in process standardization. The group reviewed targets for smart-pump drug library optimization, including dosing limits, types of alerts reviewed, policies, and safety best practices. The work group also analyzed existing processes at each site to develop a final consensus statement outlining a model process for reviewing alerts and managing smart-pump data. Analysis of the total number of alerts per device across ICPS-affiliated health systems over a 4-year period indicated a 50% decrease (from 7.2 to 3.6 alerts per device per month) after implementation of the model by ICPS member organizations. Through implementation of a standardized, consensus-driven process for smart-pump drug library optimization, ICPS member health systems reduced clinically insignificant smart-pump alerts. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Study Methods to Standardize Thermography NDE

NASA Technical Reports Server (NTRS)

Walker, James L.; Workman, Gary L.

1998-01-01

The purpose of this work is to develop thermographic inspection methods and standards for use in evaluating structural composites and aerospace hardware. Qualification techniques and calibration methods are investigated to standardize the thermographic method for use in the field. Along with the inspections of test standards structural hardware, support hardware is designed and fabricated to aid in the thermographic process. Also, a standard operating procedure is developed for performing inspections with the Bales Thermal Image Processor (TIP). Inspections are performed on a broad range of structural composites. These materials include various graphite/epoxies, graphite/cyanide-ester, graphite/silicon-carbide, graphite phenolic and Keviar/epoxy. Also metal honeycomb (titanium and aluminum faceplates over an aluminum honeycomb core) structures are investigated. Various structural shapes are investigated and the thickness of the structures vary from as few as 3 plies to as many as 80 plies. Special emphasis is placed on characterizing defects in attachment holes and bondlines, in addition to those resulting from impact damage and the inclusion of foreign matter. Image processing through statistical analysis and digital filtering is investigated to enhance the quality and quantify the NDE thermal images when necessary.

Study Methods to Standardize Thermography NDE

NASA Technical Reports Server (NTRS)

Walker, James L.; Workman, Gary L.

1998-01-01

The purpose of this work is to develop thermographic inspection methods and standards for use in evaluating structural composites and aerospace hardware. Qualification techniques and calibration methods are investigated to standardize the thermographic method for use in the field. Along with the inspections of test standards structural hardware, support hardware is designed and fabricated to aid in the thermographic process. Also, a standard operating procedure is developed for performing inspections with the Bales Thermal Image Processor (TIP). Inspections are performed on a broad range of structural composites. These materials include graphite/epoxies, graphite/cyanide-ester, graphite/silicon-carbide, graphite phenolic and Kevlar/epoxy. Also metal honeycomb (titanium and aluminum faceplates over an aluminum honeycomb core) structures are investigated. Various structural shapes are investigated and the thickness of the structures vary from as few as 3 plies to as many as 80 plies. Special emphasis is placed on characterizing defects in attachment holes and bondlines, in addition to those resulting from impact damage and the inclusion of foreign matter. Image processing through statistical analysis and digital filtering is investigated to enhance the quality and quantify the NDE thermal images when necessary.

Implementing ISO/IEEE 11073: proposal of two different strategic approaches.

PubMed

Martínez-Espronceda, M; Serrano, L; Martínez, I; Escayola, J; Led, S; Trigo, J; García, J

2008-01-01

This paper explains the challenges encountered during the ISO/IEEE 11073 standard implementation process. The complexity of the standard and the consequent heavy requirements, which have not encouraged software engineers to adopt the standard. The developing complexity evaluation drives us to propose two possible implementation strategies that cover almost all possible use cases and eases handling the standard by non-expert users. The first one is focused on medical devices (MD) and proposes a low-memory and low-processor usage technique. It is based on message patterns that allow simple functions to generate ISO/IEEE 11073 messages and to process them easily. In this way a framework for MDs can be obtained. Second one is focused on more powerful machines such as data loggers or gateways (aka. computer engines (CE)), which do not have the MDs' memory and processor usage constraints. For CEs a more intelligent and adaptative Plug&Play (P&P) solution is provided. It consists on a general platform that can access to any device supported by the standard. Combining both strategies will cut developing time for applications based on ISO/EEE 11073.

DICOM for quantitative imaging biomarker development: a standards based approach to sharing clinical data and structured PET/CT analysis results in head and neck cancer research.

PubMed

Fedorov, Andriy; Clunie, David; Ulrich, Ethan; Bauer, Christian; Wahle, Andreas; Brown, Bartley; Onken, Michael; Riesmeier, Jörg; Pieper, Steve; Kikinis, Ron; Buatti, John; Beichel, Reinhard R

2016-01-01

Background. Imaging biomarkers hold tremendous promise for precision medicine clinical applications. Development of such biomarkers relies heavily on image post-processing tools for automated image quantitation. Their deployment in the context of clinical research necessitates interoperability with the clinical systems. Comparison with the established outcomes and evaluation tasks motivate integration of the clinical and imaging data, and the use of standardized approaches to support annotation and sharing of the analysis results and semantics. We developed the methodology and tools to support these tasks in Positron Emission Tomography and Computed Tomography (PET/CT) quantitative imaging (QI) biomarker development applied to head and neck cancer (HNC) treatment response assessment, using the Digital Imaging and Communications in Medicine (DICOM(®)) international standard and free open-source software. Methods. Quantitative analysis of PET/CT imaging data collected on patients undergoing treatment for HNC was conducted. Processing steps included Standardized Uptake Value (SUV) normalization of the images, segmentation of the tumor using manual and semi-automatic approaches, automatic segmentation of the reference regions, and extraction of the volumetric segmentation-based measurements. Suitable components of the DICOM standard were identified to model the various types of data produced by the analysis. A developer toolkit of conversion routines and an Application Programming Interface (API) were contributed and applied to create a standards-based representation of the data. Results. DICOM Real World Value Mapping, Segmentation and Structured Reporting objects were utilized for standards-compliant representation of the PET/CT QI analysis results and relevant clinical data. A number of correction proposals to the standard were developed. The open-source DICOM toolkit (DCMTK) was improved to simplify the task of DICOM encoding by introducing new API abstractions. Conversion and visualization tools utilizing this toolkit were developed. The encoded objects were validated for consistency and interoperability. The resulting dataset was deposited in the QIN-HEADNECK collection of The Cancer Imaging Archive (TCIA). Supporting tools for data analysis and DICOM conversion were made available as free open-source software. Discussion. We presented a detailed investigation of the development and application of the DICOM model, as well as the supporting open-source tools and toolkits, to accommodate representation of the research data in QI biomarker development. We demonstrated that the DICOM standard can be used to represent the types of data relevant in HNC QI biomarker development, and encode their complex relationships. The resulting annotated objects are amenable to data mining applications, and are interoperable with a variety of systems that support the DICOM standard.

National Standards for History for Grades K-4: Expanding Children's World in Time and Space. Expanded Edition. Including Examples of Student Achievement for Grades K-2 and 3-4.

ERIC Educational Resources Information Center

Crabtree, Charlotte; Nash, Gary B.

Developed through a broad-based national consensus building process, the national history standards project has involved working toward agreement both on the larger purposes of history in the school curriculum and on the more specific history understandings and thinking processes all students should have equal opportunity to acquire over 12 years…

The Perceptions of Public School Administrators from Southeast Texas on the Effects of the National Educational Technology Standards for Teachers on Teacher Evaluations

ERIC Educational Resources Information Center

Wharton, Kevin F.

2014-01-01

With the infusion of technology into the learning environment, the teacher evaluation process has been affected (Whale, 2006). Consequently, the International Society of Technology in Education developed technology standards for students, teachers, and administrators known as the National Educational Technology Standards, or NETS (Morphew, 2012).…

Comparing Construct Definition in the Angoff and Objective Standard Setting Models: Playing in a House of Cards without a Full Deck

ERIC Educational Resources Information Center

Stone, Gregory Ethan; Koskey, Kristin L. K.; Sondergeld, Toni A.

2011-01-01

Typical validation studies on standard setting models, most notably the Angoff and modified Angoff models, have ignored construct development, a critical aspect associated with all conceptualizations of measurement processes. Stone compared the Angoff and objective standard setting (OSS) models and found that Angoff failed to define a legitimate…

Professional Standards and Performance Evaluation for Principals in China: A Policy Analysis of the Development of Principal Standards

ERIC Educational Resources Information Center

Liu, Shujie; Xu, Xianxuan; Grant, Leslie; Strong, James; Fang, Zheng

2017-01-01

This article presents the results of an interpretive policy analysis of China's Ministry of Education Standards (2013) for the professional practice of principals. In addition to revealing the evolution of the evaluation of principals in China and the processes by which this policy is formulated, a comparative analysis was conducted to compare it…

Software assurance standard

NASA Technical Reports Server (NTRS)

1992-01-01

This standard specifies the software assurance program for the provider of software. It also delineates the assurance activities for the provider and the assurance data that are to be furnished by the provider to the acquirer. In any software development effort, the provider is the entity or individual that actually designs, develops, and implements the software product, while the acquirer is the entity or individual who specifies the requirements and accepts the resulting products. This standard specifies at a high level an overall software assurance program for software developed for and by NASA. Assurance includes the disciplines of quality assurance, quality engineering, verification and validation, nonconformance reporting and corrective action, safety assurance, and security assurance. The application of these disciplines during a software development life cycle is called software assurance. Subsequent lower-level standards will specify the specific processes within these disciplines.

[Application of traditional Chinese medicine reference standards in quality control of Chinese herbal pieces].

PubMed

Lu, Tu-Lin; Li, Jin-Ci; Yu, Jiang-Yong; Cai, Bao-Chang; Mao, Chun-Qin; Yin, Fang-Zhou

2014-01-01

Traditional Chinese medicine (TCM) reference standards plays an important role in the quality control of Chinese herbal pieces. This paper overviewed the development of TCM reference standards. By analyzing the 2010 edition of Chinese pharmacopoeia, the application of TCM reference standards in the quality control of Chinese herbal pieces was summarized, and the problems exiting in the system were put forward. In the process of improving the quality control level of Chinese herbal pieces, various kinds of advanced methods and technology should be used to research the characteristic reference standards of Chinese herbal pieces, more and more reasonable reference standards should be introduced in the quality control system of Chinese herbal pieces. This article discussed the solutions in the aspect of TCM reference standards, and future development of quality control on Chinese herbal pieces is prospected.

Standard operating procedures for clinical research departments.

PubMed

Kee, Ashley Nichole

2011-01-01

A set of standard operating procedures (SOPs) provides a clinical research department with clear roles, responsibilities, and processes to ensure compliance, accuracy, and timeliness of data. SOPs also serve as a standardized training program for new employees. A practice may have an employee that can assist in the development of SOPs. There are also consultants that specialize in working with a practice to develop and write practice-specific SOPs. Making SOPs a priority will save a practice time and money in the long run and make the research practice more attractive to corporate study sponsors.

SU-B-213-03: Evaluation of Graduate Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, B.

2015-06-15

The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization.more » In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP.« less

SU-B-213-04: Evaluation of Residency Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reft, C.

2015-06-15

The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization.more » In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP.« less

SU-B-213-01: Introduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Starkschall, G.

2015-06-15

The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization.more » In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP.« less

SU-B-213-07: Panel Discussion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Starkschall, G.

2015-06-15

The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization.more » In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP.« less

Barriers and facilitators to development of standard treatment guidelines in India.

PubMed

Sharma, Sangeeta; Sethi, Gulshan R; Gupta, Usha; Chaudhury, Ranjit Roy

2015-01-01

This paper describes 15 years' experience of the development process of the first set of comprehensive standard treatment guidelines (STGs) for India and their adoption or adaptation by various state governments. The aim is to shorten the learning curve for those embarking on a similar exercise, given the key role of high-quality STGs that are accepted by the clinical community in furthering universal health coverage. The main overall obstacles to STG development are: (i) weak understanding of the concept; (ii) lack of time, enthusiasm and availability of local expertise; and (iii) managing consensus between specialists and generalists. Major concerns to prescribers are: encroachment on professional autonomy, loss of treating the patient as an individual and applying the same standards at all levels of health care. Processes to address these challenges are described. At the policy level, major threats to successful completion and focused implementation are: frequent changes in governance, shifts in priorities and discontinuity. In the authors' experience, compared with each state developing their own STGs afresh, adaptation of pre-existing valid guidelines after an active adaptation process involving local clinical leaders is not only simpler and quicker but also establishes local ownership and facilitates acceptance of a quality document. Executive orders and in-service sensitization programmes to introduce STGs further enhance their adoption in clinical practice.

Quality standards in a rheumatology Day-Care Hospital Unit. The proposal of the Spanish Society of Rheumatology Day Hospitals' Working Group.

PubMed

García-Vicuña, Rosario; Montoro, María; Egües Dubuc, César Antonio; Bustabad Reyes, Sagrario; Gómez-Centeno, Antonio; Muñoz-Fernández, Santiago; Pérez Pampín, Eva; Román Ivorra, Jose Andrés; Balsa, Alejandro; Loza, Estíbaliz

2014-01-01

In recent years, the Rheumatology Day-Care Hospital Units (DHU have undergone extensive development. However, the quality standards are poorly documented and mainly limited to structure items rather than including broad and specific areas of this specialty. To develop specific quality standards for Rheumatology DHU. After a systematic review of the literature and related documents, a working group (WG) involving 8 DHU-experienced rheumatologists developed an initial proposal of the quality standards, under the supervision of an expert methodologist. A second round was held by the WG group to review the initial proposal and to consider further suggestions. Once the content was agreed upon by consensus, a final report was prepared. 17 structure standards, 25 process standards and 10 results standards were defined, with special emphasis on specific aspects of the Rheumatology DHU. The proposal includes: 1) essential standards to 2) excellent standards, 3) a Rheumatology DHU services portfolio and 4) performance criteria. The proposed quality standards are the basis for developing the indicators and other management tools for Rheumatology DHU, thereby ensuring a patient-oriented practice based on both the evidence and the experience. Copyright © 2013 Elsevier España, S.L.U. All rights reserved.

German MedicalTeachingNetwork (MDN) implementing national standards for teacher training.

PubMed

Lammerding-Koeppel, M; Ebert, T; Goerlitz, A; Karsten, G; Nounla, C; Schmidt, S; Stosch, C; Dieter, P

2016-01-01

An increasing demand for proof of professionalism in higher education strives for quality assurance (QA) and improvement in medical education. A wide range of teacher trainings is available to medical staff in Germany. Cross-institutional approval of individual certificates is usually a difficult and time consuming task for institutions. In case of non-acceptance it may hinder medical teachers in their professional mobility. The faculties of medicine aimed to develop a comprehensive national framework, to promote standards for formal faculty development programmes across institutions and to foster professionalization of medical teaching. Addressing the above challenges in a joint approach, the faculties set up the national MedicalTeacherNetwork (MDN). Great importance is attributed to work out nationally concerted standards for faculty development and an agreed-upon quality control process across Germany. Medical teachers benefit from these advantages due to portability of faculty development credentials from one faculty of medicine to another within the MDN system. The report outlines the process of setting up the MDN and the national faculty development programme in Germany. Success factors, strengths and limitations are discussed from an institutional, individual and general perspective. Faculties engaged in similar developments might be encouraged to transfer the MDN concept to their countries.

Global regulatory developments for clinical stem cell research: diversification and challenges to collaborations.

PubMed

Rosemann, Achim; Bortz, Gabriela; Vasen, Federico; Sleeboom-Faulkner, Margaret

2016-10-01

In this article, we explore regulatory developments in stem cell medicine in seven jurisdictions: Japan, China, India, Argentina, Brazil, the USA and the EU. We will show that the research methods, ethical standards and approval procedures for the market use of clinical stem cell interventions are undergoing an important process of global diversification. We will discuss the implications of this process for international harmonization and the conduct of multicountry clinical research collaborations. It will become clear that the increasing heterogeneity of research standards and regulations in the stem cell field presents a significant challenge to international clinical trial partnerships, especially with countries that diverge from the regulatory models that have been developed in the USA and the EU.

State trends in ecological risk assessment and standard setting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siegel, M R; Fowler, K M; Bilyard, G R

1993-02-01

The purposes of this paper are (1) to identify key states' activities and plans related to setting cleanup standards using the ecological risk assessment process, and (2) to discuss the impacts these actions may have on the US Department of Energy's (DOE's) environmental restoration program. This report is prepared as part of a larger task, the purpose of which is to identify and assess state regulatory trends and legal developments that may impact DOE's environmental restoration program. Results of this task are intended to provide DOE with advance notice of potentially significant regulatory developments so as to enhance DOE's abilitymore » to influence these developments and to incorporate possible regulatory and policy changes into its planning process.« less

Coordinating Communities and Building Governance in the Development of Schematic and Semantic Standards: the Key to Solving Global Earth and Space Science Challenges in the 21st Century.

NASA Astrophysics Data System (ADS)

Wyborn, L. A.

2007-12-01

The Information Age in Science is being driven partly by the data deluge as exponentially growing volumes of data are being generated by research. Such large volumes of data cannot be effectively processed by humans and efficient and timely processing by computers requires development of specific machine readable formats. Further, as key challenges in earth and space sciences, such as climate change, hazard prediction and sustainable development resources require a cross disciplinary approach, data from various domains will need to be integrated from globally distributed sources also via machine to machine formats. However, it is becoming increasingly apparent that the existing standards can be very domain specific and most existing data transfer formats require human intervention. Where groups from different communities do try combine data across the domain/discipline boundaries much time is spent reformatting and reorganizing the data and it is conservatively estimated that this can take 80% of a project's time and resources. Four different types of standards are required for machine to machine interaction: systems, syntactic, schematic and semantic. Standards at the systems (WMS, WFS, etc) and at the syntactic level (GML, Observation and Measurement, SensorML) are being developed through international standards bodies such as ISO, OGC, W3C, IEEE etc. In contrast standards at the schematic level (e.g., GeoSciML, LandslidesML, WaterML, QuakeML) and at the semantic level (ie ontologies and vocabularies) are currently developing rapidly, in a very uncoordinated way and with little governance. As the size of the community that can machine read each others data depends on the size of the community that has developed the schematic or semantic standards, it is essential that to achieve global integration of earth and space science data, the required standards need to be developed through international collaboration using accepted standard proceedures. Once developed the standards also require some form of governance to maintain and then extend the standard as the science evolves to meet new challenges. A standard that does have some governance is GeoSciML, a data transfer standard for geoscience map data. GeoSciML is currently being developed by a consortium of 7 countries under the auspices of the Commission for the Management of and Application of Geoscience Information (CGI), a commission of the International Union of Geological Sciences. Perhaps other `ML' or ontology and vocabulary development `teams' need to look to their international domain specific specialty societies for endorsement and governance. But the issue goes beyond Earth and Space Sciences, as increasingly cross and intra disciplinary science requires machine to machine interaction with other science disciplines such as physics, chemistry and astronomy. For example, for geochemistry do we develop GeochemistryML or do we extend the existing Chemical Markup Language? Again, the question is who will provide the coordination of the development of the required schematic and semantic standards that underpin machine to machine global integration of science data. Is this a role for ICSU or CODATA or who? In order to address this issue, Geoscience Australia and CSIRO established the Solid Earth and Environmental Grid Community website to enable communities to `advertise' standards development and to provide a community TWIKI where standards can be developed in a globally `open' environment.

Success, failures and costs of implementing standards in the USA--lessons for infection control.

PubMed

McGowan, J E

1995-06-01

In the US, extensive standards for performance and 'guidelines for practice' have been instituted by a number of governmental and non-governmental agencies. New governmental plans for health care depend heavily on practice guidelines, and the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) has been especially enthusiastic about continuous quality improvement. Monitoring the appropriateness of care and altering physician practice appeals to insurance carriers and health care management organizations. Some initial data exist to show that the quality of health care has been enhanced by these regulations. The total cost for health care administration in 1990 in the USA was 24.8% of each hospital's spending for health care. Much of this was associated with spending for new initiatives in practice guidelines, physician profiling, quality assurance, and the like. Few data exist to show that the quality of health care or hospital infection control has been enhanced by these expenditures. Regulations and guidelines also have proliferated in infection control. Guides from the JCAHO have been expanded, and recent mandates from the Occupational Health and Safety Administration (OSHA) for protecting employees from blood-borne and respiratory pathogens promise to be especially costly for health care organizations to implement. Little data exist to show that the quality of infection control has been enhanced by these regulations. Standards are difficult to develop, because the science to back them up often is lacking, interpretation of validating data is imprecise, and inherent biological variation makes exceptions common. Seven lessons are important for those developing standards today. These include focusing on objective measures of the impact of the standard, clearly indicating the degree of scientific validity, making the development process inclusive, allowing for local variation, making sure that funding is provided for mandated standards, considering non-scientific implications of standards, and remaining involved in the process after the guideline is developed. Infection control workers should make sure that standards developed take the lessons above into account before they are promulgated.

Near real-time, on-the-move software PED using VPEF

NASA Astrophysics Data System (ADS)

Green, Kevin; Geyer, Chris; Burnette, Chris; Agarwal, Sanjeev; Swett, Bruce; Phan, Chung; Deterline, Diane

2015-05-01

The scope of the Micro-Cloud for Operational, Vehicle-Based EO-IR Reconnaissance System (MOVERS) development effort, managed by the Night Vision and Electronic Sensors Directorate (NVESD), is to develop, integrate, and demonstrate new sensor technologies and algorithms that improve improvised device/mine detection using efficient and effective exploitation and fusion of sensor data and target cues from existing and future Route Clearance Package (RCP) sensor systems. Unfortunately, the majority of forward looking Full Motion Video (FMV) and computer vision processing, exploitation, and dissemination (PED) algorithms are often developed using proprietary, incompatible software. This makes the insertion of new algorithms difficult due to the lack of standardized processing chains. In order to overcome these limitations, EOIR developed the Government off-the-shelf (GOTS) Video Processing and Exploitation Framework (VPEF) to be able to provide standardized interfaces (e.g., input/output video formats, sensor metadata, and detected objects) for exploitation software and to rapidly integrate and test computer vision algorithms. EOIR developed a vehicle-based computing framework within the MOVERS and integrated it with VPEF. VPEF was further enhanced for automated processing, detection, and publishing of detections in near real-time, thus improving the efficiency and effectiveness of RCP sensor systems.

Data storage technology: Hardware and software, Appendix B

NASA Technical Reports Server (NTRS)

Sable, J. D.

1972-01-01

This project involves the development of more economical ways of integrating and interfacing new storage devices and data processing programs into a computer system. It involves developing interface standards and a software/hardware architecture which will make it possible to develop machine independent devices and programs. These will interface with the machine dependent operating systems of particular computers. The development project will not be to develop the software which would ordinarily be the responsibility of the manufacturer to supply, but to develop the standards with which that software is expected to confirm in providing an interface with the user or storage system.

EUV mask pilot line at Intel Corporation

NASA Astrophysics Data System (ADS)

Stivers, Alan R.; Yan, Pei-Yang; Zhang, Guojing; Liang, Ted; Shu, Emily Y.; Tejnil, Edita; Lieberman, Barry; Nagpal, Rajesh; Hsia, Kangmin; Penn, Michael; Lo, Fu-Chang

2004-12-01

The introduction of extreme ultraviolet (EUV) lithography into high volume manufacturing requires the development of a new mask technology. In support of this, Intel Corporation has established a pilot line devoted to encountering and eliminating barriers to manufacturability of EUV masks. It concentrates on EUV-specific process modules and makes use of the captive standard photomask fabrication capability of Intel Corporation. The goal of the pilot line is to accelerate EUV mask development to intersect the 32nm technology node. This requires EUV mask technology to be comparable to standard photomask technology by the beginning of the silicon wafer process development phase for that technology node. The pilot line embodies Intel's strategy to lead EUV mask development in the areas of the mask patterning process, mask fabrication tools, the starting material (blanks) and the understanding of process interdependencies. The patterning process includes all steps from blank defect inspection through final pattern inspection and repair. We have specified and ordered the EUV-specific tools and most will be installed in 2004. We have worked with International Sematech and others to provide for the next generation of EUV-specific mask tools. Our process of record is run repeatedly to ensure its robustness. This primes the supply chain and collects information needed for blank improvement.

18 CFR 708.3 - Policy, objectives, and standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... improved popular understanding of official studies, planning processes, and decisions. (3) In order for... participation section of the Master Plan—Plan of Study shall be developed consistent with the guidelines... Master Plan shall aim for the highest achievable standards of objectivity and thoroughness consistent...

18 CFR 708.3 - Policy, objectives, and standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... improved popular understanding of official studies, planning processes, and decisions. (3) In order for... participation section of the Master Plan—Plan of Study shall be developed consistent with the guidelines... Master Plan shall aim for the highest achievable standards of objectivity and thoroughness consistent...

18 CFR 708.3 - Policy, objectives, and standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... improved popular understanding of official studies, planning processes, and decisions. (3) In order for... participation section of the Master Plan—Plan of Study shall be developed consistent with the guidelines... Master Plan shall aim for the highest achievable standards of objectivity and thoroughness consistent...

75 FR 18751 - FBI Criminal Justice Information Services Division User Fees

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-13

... Standards (SFFAS-4): Managerial Cost Accounting Concepts and Standards for the Federal Government; and other relevant financial management directives, BearingPoint developed a cost accounting methodology and related... management process that provides information about the relationships between inputs (costs) and outputs...

Maturation of Visual and Auditory Temporal Processing in School-Aged Children

ERIC Educational Resources Information Center

Dawes, Piers; Bishop, Dorothy V. M.

2008-01-01

Purpose: To examine development of sensitivity to auditory and visual temporal processes in children and the association with standardized measures of auditory processing and communication. Methods: Normative data on tests of visual and auditory processing were collected on 18 adults and 98 children aged 6-10 years of age. Auditory processes…

5th Conference on Aerospace Materials, Processes, and Environmental Technology

NASA Technical Reports Server (NTRS)

Cook, M. B. (Editor); Stanley, D. Cross (Editor)

2003-01-01

Records are presented from the 5th Conference on Aerospace Materials, Processes, and Environmental Technology. Topics included pollution prevention, inspection methods, advanced materials, aerospace materials and technical standards,materials testing and evaluation, advanced manufacturing,development in metallic processes, synthesis of nanomaterials, composite cryotank processing, environmentally friendly cleaning, and poster sessions.

Basic Science Process Skills. An Inservice Workshop Kit: Outlines and Activities.

ERIC Educational Resources Information Center

Rowland, Paul; And Others

A science process skill project was developed to help elementary teachers meet competency standards in New Mexico for teaching the process approach in their science classes. An outline of the process skills along with recommended activities are presented in this document. Performance objectives are identified and a sample activity form is…

The Internal Medicine of the 21st century: Organizational and operational standards.

PubMed

Casariego-Vales, E; Zapatero-Gaviria, A; Elola-Somoza, F J

2017-12-01

The Spanish Society of Internal Medicine has developed a consensus document on the standards and recommendations that they consider essential to the organisation of internal medicine units for conducting their activities efficiently and with high quality. We defined 3 groups of key processes: the care of acutely ill adult patients, the comprehensive care of complex chronic patients and the examination of a patient with a difficult diagnosis and no organ-specific disease. As support processes, we identified the structure and operation of the Internal Medicine units. As strategic processes, we identified training and research. The main subprocesses are structured below, and we established the standards and recommendations for each of them. Lastly, we proposed resulting workloads. The prepared standards must be reviewed within a maximum of 4 years. Copyright © 2017 Elsevier España, S.L.U. and Sociedad Española de Medicina Interna (SEMI). All rights reserved.

PC based PLCs and ethernet based fieldbus: the new standard platform for future VLT instrument control

NASA Astrophysics Data System (ADS)

Kiekebusch, Mario J.; Lucuix, Christian; Erm, Toomas M.; Chiozzi, Gianluca; Zamparelli, Michele; Kern, Lothar; Brast, Roland; Pirani, Werther; Reiss, Roland; Popovic, Dan; Knudstrup, Jens; Duchateau, Michel; Sandrock, Stefan; Di Lieto, Nicola

2014-07-01

ESO is currently in the final phase of the standardization process for PC-based Programmable Logical Controllers (PLCs) as the new platform for the development of control systems for future VLT/VLTI instruments. The standard solution used until now consists of a Local Control Unit (LCU), a VME-based system having a CPU and commercial and proprietary boards. This system includes several layers of software and many thousands of lines of code developed and maintained in house. LCUs have been used for several years as the interface to control instrument functions but now are being replaced by commercial off-the-shelf (COTS) systems based on BECKHOFF Embedded PCs and the EtherCAT fieldbus. ESO is working on the completion of the software framework that enables a seamless integration into the VLT control system in order to be ready to support upcoming instruments like ESPRESSO and ERIS, that will be the first fully VLT compliant instruments using the new standard. The technology evaluation and standardization process has been a long and combined effort of various engineering disciplines like electronics, control and software, working together to define a solution that meets the requirements and minimizes the impact on the observatory operations and maintenance. This paper presents the challenges of the standardization process and the steps involved in such a change. It provides a technical overview of how industrial standards like EtherCAT, OPC-UA, PLCOpen MC and TwinCAT can be used to replace LCU features in various areas like software engineering and programming languages, motion control, time synchronization and astronomical tracking.

Distributed geospatial model sharing based on open interoperability standards

USGS Publications Warehouse

Feng, Min; Liu, Shuguang; Euliss, Ned H.; Fang, Yin

2009-01-01

Numerous geospatial computational models have been developed based on sound principles and published in journals or presented in conferences. However modelers have made few advances in the development of computable modules that facilitate sharing during model development or utilization. Constraints hampering development of model sharing technology includes limitations on computing, storage, and connectivity; traditional stand-alone and closed network systems cannot fully support sharing and integrating geospatial models. To address this need, we have identified methods for sharing geospatial computational models using Service Oriented Architecture (SOA) techniques and open geospatial standards. The service-oriented model sharing service is accessible using any tools or systems compliant with open geospatial standards, making it possible to utilize vast scientific resources available from around the world to solve highly sophisticated application problems. The methods also allow model services to be empowered by diverse computational devices and technologies, such as portable devices and GRID computing infrastructures. Based on the generic and abstract operations and data structures required for Web Processing Service (WPS) standards, we developed an interactive interface for model sharing to help reduce interoperability problems for model use. Geospatial computational models are shared on model services, where the computational processes provided by models can be accessed through tools and systems compliant with WPS. We developed a platform to help modelers publish individual models in a simplified and efficient way. Finally, we illustrate our technique using wetland hydrological models we developed for the prairie pothole region of North America.

The MSFC Collaborative Engineering Process for Preliminary Design and Concept Definition Studies

NASA Technical Reports Server (NTRS)

Mulqueen, Jack; Jones, David; Hopkins, Randy

2011-01-01

This paper describes a collaborative engineering process developed by the Marshall Space Flight Center's Advanced Concepts Office for performing rapid preliminary design and mission concept definition studies for potential future NASA missions. The process has been developed and demonstrated for a broad range of mission studies including human space exploration missions, space transportation system studies and in-space science missions. The paper will describe the design team structure and specialized analytical tools that have been developed to enable a unique rapid design process. The collaborative engineering process consists of integrated analysis approach for mission definition, vehicle definition and system engineering. The relevance of the collaborative process elements to the standard NASA NPR 7120.1 system engineering process will be demonstrated. The study definition process flow for each study discipline will be will be outlined beginning with the study planning process, followed by definition of ground rules and assumptions, definition of study trades, mission analysis and subsystem analyses leading to a standardized set of mission concept study products. The flexibility of the collaborative engineering design process to accommodate a wide range of study objectives from technology definition and requirements definition to preliminary design studies will be addressed. The paper will also describe the applicability of the collaborative engineering process to include an integrated systems analysis approach for evaluating the functional requirements of evolving system technologies and capabilities needed to meet the needs of future NASA programs.

Lessons Learned from LIBS Calibration Development

NASA Astrophysics Data System (ADS)

Dyar, M. D.; Breves, E. A.; Lepore, K. H.; Boucher, T. F.; Giguere, S.

2016-10-01

More than two decades of work have been dedicated to development of robust standards, data processing, and calibration tools for LIBS. Here we summarize major considerations for improving accuracy of LIBS chemical analyses.

Fundamentals of robotic surgery: a course of basic robotic surgery skills based upon a 14-society consensus template of outcomes measures and curriculum development.

PubMed

Smith, Roger; Patel, Vipul; Satava, Richard

2014-09-01

There is a need for a standardized curriculum for training and assessment of robotic surgeons to proficiency, followed by high-stakes testing (HST) for certification. To standardize the curriculum and certification of robotic surgeons, a series of consensus conferences attended by 14 leading international surgical societies have been used to compile the outcomes measures and curriculum that should form the basis for a Fundamentals of Robotic Surgery (FRS) programme. A set of 25 outcomes measures and a curriculum for teaching the skills needed to safely use current generation surgical robotic systems has been developed and accepted by a committee of experienced robotic surgeons across 14 specialties. A standardized process for certifying the skills of a robotic surgeon has begun to emerge. The work described here documents both the processes used for developing educational material and the educational content of a robotic curriculum. Copyright © 2013 John Wiley & Sons, Ltd.

Hospital cost accounting: implementing the system successfully.

PubMed

Burik, D; Duvall, T J

1985-05-01

To successfully implement a cost accounting system, certain key steps should be undertaken. These steps include developing and installing software; developing cost center budgets and inter-cost center allocations; developing service item standard costs; generating cost center level and patient level standard cost reports and reconciling these costs to actual costs; generating product line profitability reports and reconciling these reports to the financial statements; and providing ad hoc reporting capabilities. By following these steps, potential problems in the implementation process can be anticipated and avoided.

Knowledge Management Orientation: An Innovative Perspective to Hospital Management

PubMed Central

GHASEMI, Matina; GHADIRI NEJAD, Mazyar; BAGZIBAGLI, Kemal

2017-01-01

Background: By considering innovation as a new project in hospitals, all the project management’s standard steps should be followed in execution. This study investigated the validation of a new set of measures in terms of providing a procedure for knowledge management-oriented innovation that enriches the hospital management system. Methods: The relation between innovation and all the knowledge management areas, as the main constructs of project management, was illustrated by referring to project management standard steps and previous studies. Through consultations and meetings with a committee of professional project managers, a questionnaire was developed to measure ten knowledge management areas in hospital’s innovation process. Additionally, a group of experts from hospital managers were invited to comment on the applicability of the questionnaires by considering if the items are measurable in hospitals practically. Results: A close-ended, Likert-type scale items, consisted of ten sections, were developed based on project management body of knowledge thorough Delphi technique. It enables the managers to evaluate hospitals’ situation to be aware whether the organization follows the knowledge management standards in innovation process or not. By pilot study, confirmatory factor analysis and exploratory factor analysis were conducted to ensure the validity and reliability of the measurement items. Conclusion: The developed items seem to have a potential to help hospital managers and subsequently delivering new products/services successfully based on the standard procedures in their organization. In all innovation processes, the knowledge management areas and their standard steps help hospital managers by a new tool as questionnaire format. PMID:29259938

The Vector, Signal, and Image Processing Library (VSIPL): an Open Standard for Astronomical Data Processing

NASA Astrophysics Data System (ADS)

Kepner, J. V.; Janka, R. S.; Lebak, J.; Richards, M. A.

1999-12-01

The Vector/Signal/Image Processing Library (VSIPL) is a DARPA initiated effort made up of industry, government and academic representatives who have defined an industry standard API for vector, signal, and image processing primitives for real-time signal processing on high performance systems. VSIPL supports a wide range of data types (int, float, complex, ...) and layouts (vectors, matrices and tensors) and is ideal for astronomical data processing. The VSIPL API is intended to serve as an open, vendor-neutral, industry standard interface. The object-based VSIPL API abstracts the memory architecture of the underlying machine by using the concept of memory blocks and views. Early experiments with VSIPL code conversions have been carried out by the High Performance Computing Program team at the UCSD. Commercially, several major vendors of signal processors are actively developing implementations. VSIPL has also been explicitly required as part of a recent Rome Labs teraflop procurement. This poster presents the VSIPL API, its functionality and the status of various implementations.

Chemical vapor deposition growth

NASA Technical Reports Server (NTRS)

Ruth, R. P.; Manasevit, H. M.; Kenty, J. L.; Moudy, L. A.; Simpson, W. I.; Yang, J. J.

1976-01-01

The chemical vapor deposition (CVD) method for the growth of Si sheet on inexpensive substrate materials is investigated. The objective is to develop CVD techniques for producing large areas of Si sheet on inexpensive substrate materials, with sheet properties suitable for fabricating solar cells meeting the technical goals of the Low Cost Silicon Solar Array Project. Specific areas covered include: (1) modification and test of existing CVD reactor system; (2) identification and/or development of suitable inexpensive substrate materials; (3) experimental investigation of CVD process parameters using various candidate substrate materials; (4) preparation of Si sheet samples for various special studies, including solar cell fabrication; (5) evaluation of the properties of the Si sheet material produced by the CVD process; and (6) fabrication and evaluation of experimental solar cell structures, using standard and near-standard processing techniques.

External Standards or Standard Addition? Selecting and Validating a Method of Standardization

NASA Astrophysics Data System (ADS)

Harvey, David T.

2002-05-01

A common feature of many problem-based laboratories in analytical chemistry is a lengthy independent project involving the analysis of "real-world" samples. Students research the literature, adapting and developing a method suitable for their analyte, sample matrix, and problem scenario. Because these projects encompass the complete analytical process, students must consider issues such as obtaining a representative sample, selecting a method of analysis, developing a suitable standardization, validating results, and implementing appropriate quality assessment/quality control practices. Most textbooks and monographs suitable for an undergraduate course in analytical chemistry, however, provide only limited coverage of these important topics. The need for short laboratory experiments emphasizing important facets of method development, such as selecting a method of standardization, is evident. The experiment reported here, which is suitable for an introductory course in analytical chemistry, illustrates the importance of matrix effects when selecting a method of standardization. Students also learn how a spike recovery is used to validate an analytical method, and obtain a practical experience in the difference between performing an external standardization and a standard addition.

[From manual workshop to international standard maker: exploration on production standard of acupuncture needle by Chengjiang acupuncture school].

PubMed

Cheng, Jie; Cao, Yang; Xia, Youbing

2015-02-01

ABSTRACT The exploration course on production standard of acupuncture needle by Chengjiang acupuncture school is reviewed in this paper. After new China was established, acupuncture needle standard was unified by Mr. CHENG Dan-an, which guided Suzhou Hua Erfang (predecessor of Suzhou Medical Supplies Factory) to make the quality standards and testing methods of acupuncture needle and improved the production process to make the modern acupuncture needle. Based on this, Suzhou Medical Supplies Factory followed the time development pace, ac tively introduced new technology, carried out technological innovation, and constantly improved the level of production technology, as a result, it gradually developed into one of the world's largest acupuncture needle production suppliers. Meanwhile, after establishing China's first national standard on acupuncture needle (GB 2024-1980), the Suzhou Medical Supplies Factory took the lead to draft "ISO) 17218:2014 the disposable use asepsis acupuncture needle", which was officially published as an international standard. The Suzhou Medical Supplies Factory developed from a manual workshop to an international standard maker.

[Research progress on breeding standard of medicinal animals and discussion on several key problems].

PubMed

Zhou, Yi-Quan; Qu, Xian-You; Yang, Guang; Li, Jun-de; Su, Yan; Li, Ying

2016-12-01

Medicinal animal breeding standards is regarded as the law to normalize relevant production that can guarantee the quality of traditional Chinese medicine of animal category. The article summarized the medicinal animal resources in our country and the present condition of medicinal animal breeding standards. It considered the current animal breeding standards system was in adequate, not only the quantity of breeding standards, the standard content and index were also uncomprehensive, which is not conducive to the scientific and orderly development and utilization of medicinal animal resources. The article pointed out that the development of the basic standards, environmental control, feed quality, raising management, inspection and quarantine should be included into the medicinal animal breeding standards, and the medicinal animal breeding standards content framework was introduced. Meanwhile, animal welfare, biological safety and file management should be concerned during the process of research. Hope the article has good reference value to medicinal animal breeding standards establishment and production management. Copyright© by the Chinese Pharmaceutical Association.

DEVELOPMENT OF A CHEMICAL PROCESS MODELING ENVIRONMENT BASED ON CAPE-OPEN INTERFACE STANDARDS AND THE MICROSOFT .NET FRAMEWORK

EPA Science Inventory

Chemical process simulation has long been used as a design tool in the development of chemical plants, and has long been considered a means to evaluate different design options. With the advent of large scale computer networks and interface models for program components, it is po...

A Multi-mission Event-Driven Component-Based System for Support of Flight Software Development, ATLO, and Operations first used by the Mars Science Laboratory (MSL) Project

NASA Technical Reports Server (NTRS)

Dehghani, Navid; Tankenson, Michael

2006-01-01

This paper details an architectural description of the Mission Data Processing and Control System (MPCS), an event-driven, multi-mission ground data processing components providing uplink, downlink, and data management capabilities which will support the Mars Science Laboratory (MSL) project as its first target mission. MPCS is developed based on a set of small reusable components, implemented in Java, each designed with a specific function and well-defined interfaces. An industry standard messaging bus is used to transfer information among system components. Components generate standard messages which are used to capture system information, as well as triggers to support the event-driven architecture of the system. Event-driven systems are highly desirable for processing high-rate telemetry (science and engineering) data, and for supporting automation for many mission operations processes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zitney, S.E.

This paper highlights the use of the CAPE-OPEN (CO) standard interfaces in the Advanced Process Engineering Co-Simulator (APECS) developed at the National Energy Technology Laboratory (NETL). The APECS system uses the CO unit operation, thermodynamic, and reaction interfaces to provide its plug-and-play co-simulation capabilities, including the integration of process simulation with computational fluid dynamics (CFD) simulation. APECS also relies heavily on the use of a CO COM/CORBA bridge for running process/CFD co-simulations on multiple operating systems. For process optimization in the face of multiple and some time conflicting objectives, APECS offers stochastic modeling and multi-objective optimization capabilities developed to complymore » with the CO software standard. At NETL, system analysts are applying APECS to a wide variety of advanced power generation systems, ranging from small fuel cell systems to commercial-scale power plants including the coal-fired, gasification-based FutureGen power and hydrogen production plant.« less

Chemical vapor deposition growth

NASA Technical Reports Server (NTRS)

Ruth, R. P.; Manasevit, H. M.; Campbell, A. G.; Johnson, R. E.; Kenty, J. L.; Moudy, L. A.; Shaw, G. L.; Simpson, W. I.; Yang, J. J.

1978-01-01

The objective was to investigate and develop chemical vapor deposition (CVD) techniques for the growth of large areas of Si sheet on inexpensive substrate materials, with resulting sheet properties suitable for fabricating solar cells that would meet the technical goals of the Low Cost Silicon Solar Array Project. The program involved six main technical tasks: (1) modification and test of an existing vertical-chamber CVD reactor system; (2) identification and/or development of suitable inexpensive substrate materials; (3) experimental investigation of CVD process parameters using various candidate substrate materials; (4) preparation of Si sheet samples for various special studies, including solar cell fabrication; (5) evaluation of the properties of the Si sheet material produced by the CVD process; and (6) fabrication and evaluation of experimental solar cell structures, using impurity diffusion and other standard and near-standard processing techniques supplemented late in the program by the in situ CVD growth of n(+)/p/p(+) sheet structures subsequently processed into experimental cells.

Progress on uncooled PbSe detectors for low-cost applications

NASA Astrophysics Data System (ADS)

Vergara, German; Gomez, Luis J.; Villamayor, Victor; Alvarez, M.; Rodrigo, Maria T.; del Carmen Torquemada, Maria; Sanchez, Fernando J.; Verdu, Marina; Diezhandino, Jorge; Rodriguez, Purificacion; Catalan, Irene; Almazan, Rosa; Plaza, Julio; Montojo, Maria T.

2004-08-01

This work reports on progress on development of polycrystalline PbSe infrared detectors at the Centro de Investigacion y Desarrollo de la Armada (CIDA). Since mid nineties, the CIDA owns an innovative technology for processing uncooled MWIR detectors of polycrystalline PbSe. Based on this technology, some applications have been developed. However, future applications demand smarter, more complex, faster yet cheaper detectors. Aiming to open new perspectives to polycrystalline PbSe detectors, we are currently working on different directions: 1) Processing of 2D arrays: a) Designing and processing low density x-y addressed arrays with 16x16 and 32x32 elements, as an extension of our standard technology. b) Trying to make compatible standard CMOS and polycrystalline PbSe technologies in order to process monolithic large format arrays. 2) Adding new features to the detector such as monolithically integrated spectral discrimination.

Safe Handling of Snakes in an ED Setting.

PubMed

Cockrell, Melanie; Swanson, Kristofer; Sanders, April; Prater, Samuel; von Wenckstern, Toni; Mick, JoAnn

2017-01-01

Efforts to improve consistency in management of snakes and venomous snake bites in the emergency department (ED) can improve patient and staff safety and outcomes, as well as improve surveillance data accuracy. The emergency department at a large academic medical center identified an opportunity to implement a standardized process for snake disposal and identification to reduce staff risk exposure to snake venom from snakes patients brought with them to the ED. A local snake consultation vendor and zoo Herpetologist assisted with development of a process for snake identification and disposal. All snakes have been identified and securely disposed of using the newly implemented process and no safety incidents have been reported. Other emergency department settings may consider developing a standardized process for snake disposal using listed specialized consultants combined with local resources and suppliers to promote employee and patient safety. Copyright © 2017 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

Speaking the right language: the scientific method as a framework for a continuous quality improvement program within academic medical research compliance units.

PubMed

Nolte, Kurt B; Stewart, Douglas M; O'Hair, Kevin C; Gannon, William L; Briggs, Michael S; Barron, A Marie; Pointer, Judy; Larson, Richard S

2008-10-01

The authors developed a novel continuous quality improvement (CQI) process for academic biomedical research compliance administration. A challenge in developing a quality improvement program in a nonbusiness environment is that the terminology and processes are often foreign. Rather than training staff in an existing quality improvement process, the authors opted to develop a novel process based on the scientific method--a paradigm familiar to all team members. The CQI process included our research compliance units. Unit leaders identified problems in compliance administration where a resolution would have a positive impact and which could be resolved or improved with current resources. They then generated testable hypotheses about a change to standard practice expected to improve the problem, and they developed methods and metrics to assess the impact of the change. The CQI process was managed in a "peer review" environment. The program included processes to reduce the incidence of infections in animal colonies, decrease research protocol-approval times, improve compliance and protection of animal and human research subjects, and improve research protocol quality. This novel CQI approach is well suited to the needs and the unique processes of research compliance administration. Using the scientific method as the improvement paradigm fostered acceptance of the project by unit leaders and facilitated the development of specific improvement projects. These quality initiatives will allow us to improve support for investigators while ensuring that compliance standards continue to be met. We believe that our CQI process can readily be used in other academically based offices of research.

Evolution of Secondary Software Businesses: Understanding Industry Dynamics

NASA Astrophysics Data System (ADS)

Tyrväinen, Pasi; Warsta, Juhani; Seppänen, Veikko

Primary software industry originates from IBM's decision to unbundle software-related computer system development activities to external partners. This kind of outsourcing from an enterprise internal software development activity is a common means to start a new software business serving a vertical software market. It combines knowledge of the vertical market process with competence in software development. In this research, we present and analyze the key figures of the Finnish secondary software industry, in order to quantify its interaction with the primary software industry during the period of 2000-2003. On the basis of the empirical data, we present a model for evolution of a secondary software business, which makes explicit the industry dynamics. It represents the shift from internal software developed for competitive advantage to development of products supporting standard business processes on top of standardized technologies. We also discuss the implications for software business strategies in each phase.

Electronic Data Interchange in Defense Transportation

DTIC Science & Technology

1987-10-01

entry into a nearly paperless transportation environment. • Prescribe DoD’s use of the EDI standards developed by the transportation industry and lead...information into a format for internal use so that it can be processed. * Key Entry Costs. Data will no longer need to be entered manually into a terminal or...that commercial standards cannot meet, DoD must create standards. A vehicle for creating those DoD-unique standards now exists. That vehicle , the

7 CFR 51.312 - Mature.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Definitions § 51.312 Mature. “Mature” means that the apples have reached the stage of development which will insure the proper completion of the ripening process. Before a mature apple becomes overripe it will show varying degrees of firmness...

7 CFR 51.312 - Mature.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Definitions § 51.312 Mature. “Mature” means that the apples have reached the stage of development which will insure the proper completion of the ripening process. Before a mature apple becomes overripe it will show varying degrees of firmness...

Data Development of Detail Standards For Outside Machinery Operations

DTIC Science & Technology

1985-01-01

the preparation of food . oven operates differently than the conventional free heat The convection oven forces the heat to circulate by the For the...that the product at the various stages meets quality and technical workmanship established by drawings, Manufact - uring Standard Processes, as well as

75 FR 35689 - System Personnel Training Reliability Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... using realistic simulations.\\14\\ \\13\\ Id. P 1331. \\14\\ Reliability Standard PER-002-0. 9. In Order No... development process to: (1) Include formal training requirements for reliability coordinators similar to those... simulation technology such as a simulator, virtual technology, or other technology in their emergency...

Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage

NASA Technical Reports Server (NTRS)

Sibille, L.; Carpenter, P.; Schlagheck, R.; French, R. A.

2006-01-01

Experience gained during the Apollo program demonstrated the need for extensive testing of surface systems in relevant environments, including regolith materials similar to those encountered on the lunar surface. As NASA embarks on a return to the Moon, it is clear that the current lunar sample inventory is not only insufficient to support lunar surface technology and system development, but its scientific value is too great to be consumed by destructive studies. Every effort must be made to utilize standard simulant materials, which will allow developers to reduce the cost, development, and operational risks to surface systems. The Lunar Regolith Simulant Materials Workshop held in Huntsville, AL, on January 24 26, 2005, identified the need for widely accepted standard reference lunar simulant materials to perform research and development of technologies required for lunar operations. The workshop also established a need for a common, traceable, and repeatable process regarding the standardization, characterization, and distribution of lunar simulants. This document presents recommendations for the standardization, production and usage of lunar regolith simulant materials.

Some contingencies of spelling

PubMed Central

Lee, Vicki L.; Sanderson, Gwenda M.

1987-01-01

This paper presents some speculation about the contingencies that might select standard spellings. The speculation is based on a new development in the teaching of spelling—the process writing approach, which lets standard spellings emerge collateral to a high frequency of reading and writing. The paper discusses this approach, contrasts it with behavior-analytic research on spelling, and suggests some new directions for this latter research based on a behavioral interpretation of the process writing approach to spelling. PMID:22477529

A Survey of Pennsylvania School Principals' Perceptions of the National Board for Professional Teaching Standards Certification Process and the Leadership Roles of National Board Certified Teachers

ERIC Educational Resources Information Center

Balbach, Amy Beth Mackie

2012-01-01

Throughout the 1980's, the notion of standards came to the forefront throughout the education world. Groups questioned how to define quality teaching. The National Board for Professional Teaching Standards was developed to meet this need providing a voluntary national certification to identify accomplished teachers. Since its inception,…

The Quality Adaptation Model: Adaptation and Adoption of the Quality Standard ISO/IEC 19796-1 for Learning, Education, and Training

ERIC Educational Resources Information Center

Pawlowski, Jan M.

2007-01-01

In 2005, the new quality standard for learning, education, and training, ISO/IEC 19796-1, was published. Its purpose is to help educational organizations to develop quality systems and to improve the quality of their processes, products, and services. In this article, the standard is presented and compared to existing approaches, showing the…

Materials and Process Specifications and Standards

DTIC Science & Technology

1977-11-01

Integrity Requirements; Fracture Control 65 5.9.3 Some Special Problems in Electronic 66 Materials Specifications 5.9.3.1 Thermal Stresses 66...fatigue and fracture and by defining human engineering concepts. Conform to OSHA regulations such as toxicity, noise levels etc. Develop...Standardization Society of the Valves and Fittings Industry. 41 4.6.2.4 OTHER ORGANIZATIONS There are a number of standards-making organizations that cannot

Global standards and local knowledge building: Upgrading small producers in developing countries

PubMed Central

Perez-Aleman, Paola

2012-01-01

Local knowledge building is a crucial factor for upgrading small producers and improving their market competitiveness and livelihoods. The rise of global standards affecting food safety and environmental sustainability in agriculture sparks debates on the impact on smallholders in developing countries. This article presents a perspective on the links of international standards to knowledge and institution building for developing the capabilities of small producers. Interacting with global practices, indigenous private and public actors create local institutions to develop capabilities for product and process innovations that contribute to economic development and enhance food security. Local innovation depends on collective strategic efforts through increasing networks among small producers and other organizations, including firms, nongovernmental organizations, and government, that foster knowledge circulation and bring diverse resources and support to build local capabilities. PMID:21670309

Global standards and local knowledge building: upgrading small producers in developing countries.

PubMed

Perez-Aleman, Paola

2012-07-31

Local knowledge building is a crucial factor for upgrading small producers and improving their market competitiveness and livelihoods. The rise of global standards affecting food safety and environmental sustainability in agriculture sparks debates on the impact on smallholders in developing countries. This article presents a perspective on the links of international standards to knowledge and institution building for developing the capabilities of small producers. Interacting with global practices, indigenous private and public actors create local institutions to develop capabilities for product and process innovations that contribute to economic development and enhance food security. Local innovation depends on collective strategic efforts through increasing networks among small producers and other organizations, including firms, nongovernmental organizations, and government, that foster knowledge circulation and bring diverse resources and support to build local capabilities.

STRS Compliant FPGA Waveform Development

NASA Technical Reports Server (NTRS)

Nappier, Jennifer; Downey, Joseph; Mortensen, Dale

2008-01-01

The Space Telecommunications Radio System (STRS) Architecture Standard describes a standard for NASA space software defined radios (SDRs). It provides a common framework that can be used to develop and operate a space SDR in a reconfigurable and reprogrammable manner. One goal of the STRS Architecture is to promote waveform reuse among multiple software defined radios. Many space domain waveforms are designed to run in the special signal processing (SSP) hardware. However, the STRS Architecture is currently incomplete in defining a standard for designing waveforms in the SSP hardware. Therefore, the STRS Architecture needs to be extended to encompass waveform development in the SSP hardware. The extension of STRS to the SSP hardware will promote easier waveform reconfiguration and reuse. A transmit waveform for space applications was developed to determine ways to extend the STRS Architecture to a field programmable gate array (FPGA). These extensions include a standard hardware abstraction layer for FPGAs and a standard interface between waveform functions running inside a FPGA. A FPGA-based transmit waveform implementation of the proposed standard interfaces on a laboratory breadboard SDR will be discussed.

[Development of integrated support software for clinical nutrition].

PubMed

Siquier Homar, Pedro; Pinteño Blanco, Manel; Calleja Hernández, Miguel Ángel; Fernández Cortés, Francisco; Martínez Sotelo, Jesús

2015-09-01

to develop an integrated computer software application for specialized nutritional support, integrated in the electronic clinical record, which detects automatically and early those undernourished patients or at risk of developing undernourishment, determining points of opportunity for improvement and evaluation of the results. the quality standards published by the Nutrition Work Group of the Spanish Society of Hospital Pharmacy (SEFH) and the recommendations by the Pharmacy Group of the Spanish Society of Parenteral and Enteral Nutrition (SENPE) have been taken into account. According to these quality standards, the nutritional support has to include the following healthcare stages or sub-processes: nutritional screening, nutritional assessment, plan for nutritional care, prescription, preparation and administration. this software allows to conduct, in an automated way, a specific nutritional assessment for those patients with nutritional risk, implementing, if necessary, a nutritional treatment plan, conducting follow-up and traceability of outcomes derived from the implementation of improvement actions, and quantifying to what extent our practice is close to the established standard. this software allows to standardize the specialized nutritional support from a multidisciplinary point of view, introducing the concept of quality control per processes, and including patient as the main customer. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

76 FR 296 - Periodic Reporting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... part would update the mail processing portion of the Parcel Select/Parcel Return Service cost models...) processing cost model that was filed as Proposal Seven on September 8, 2010. Proposal Thirteen at 1. These... develop the Standard Mail/non-flat machinable (NFM) mail processing cost model. It also proposes to use...

Manufacturing Bms/Iso System Review

NASA Technical Reports Server (NTRS)

Gomez, Yazmin

2004-01-01

The Quality Management System (QMS) is one that recognizes the need to continuously change and improve an organization s products and services as determined by system feedback, and corresponding management decisions. The purpose of a Quality Management System is to minimize quality variability of an organization's products and services. The optimal Quality Management System balances the need for an organization to maintain flexibility in the products and services it provides with the need for providing the appropriate level of discipline and control over the processes used to provide them. The goal of a Quality Management System is to ensure the quality of the products and services while consistently (through minimizing quality variability) meeting or exceeding customer expectations. The GRC Business Management System (BMS) is the foundation of the Center's ISO 9001:2000 registered quality system. ISO 9001 is a quality system model developed by the International Organization for Standardization. BMS supports and promote the Glenn Research Center Quality Policy and wants to ensure the customer satisfaction while also meeting quality standards. My assignment during this summer is to examine the manufacturing processes used to develop research hardware, which in most cases are one of a kind hardware, made with non conventional equipment and materials. During this process of observation I will make a determination, based on my observations of the hardware development processes the best way to meet customer requirements and at the same time achieve the GRC quality standards. The purpose of my task is to review the manufacturing processes identifying opportunities in which to optimize the efficiency of the processes and establish a plan for implementation and continuous improvement.

AWS breaks new ground with soldering specification.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vianco, Paul Thomas

Joining technologies continue to advance with new materials, process innovations, and inspection techniques. An increasing number of high-valued, high-reliability applications -- from boilers and ship hulls to rocket motors and medical devices -- have required the development of industry standards and specifications in order to ensure that the best design and manufacturing practices are being used to produce safe, durable products and assemblies. Standards writing has always had an important role at the American Welding Society (AWS). The AWS standards and specifications cover such topics as filler materials, joining processes, inspection techniques, and qualification methods that are used in weldingmore » and brazing technologies. These AWS standards and specifications, all of which are approved by the American National Standards Institute (ANSI), have also provided the basis for many similar documents used in Europe and in Pacific Rim countries.« less

The ESA standard for telemetry and telecommand packet utilisation: PUS

NASA Technical Reports Server (NTRS)

Kaufeler, Jean-Francois

1994-01-01

ESA has developed standards for packet telemetry and telecommand, which are derived from the recommendations of the Inter-Agency Consultative Committee for Space Data Systems (CCSDS). These standards are now mandatory for future ESA programs as well as for many programs currently under development. However, while these packet standards address the end-to-end transfer of telemetry and telecommand data between applications on the ground and Application Processes on-board, they leave open the internal structure or content of the packets. This paper presents the ESA Packet Utilization Standard (PUS) which addresses this very subject and, as such, serves to extend and complement the ESA packet standards. The goal of the PUS is to be applicable to future ESA missions in all application areas (Telecommunications, Science, Earth Resources, microgravity, etc.). The production of the PUS falls under the responsibility of the ESA Committee for Operations and EGSE Standards (COES).

A Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Brennan T.; Welch, Tim; Witt, Adam M.

The Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology (MYRP) presents a strategy for specifying, designing, testing, and demonstrating the efficacy of standard modular hydropower (SMH) as an environmentally compatible and cost-optimized renewable electricity generation technology. The MYRP provides the context, background, and vision for testing the SMH hypothesis: if standardization, modularity, and preservation of stream functionality become essential and fully realized features of hydropower technology, project design, and regulatory processes, they will enable previously unrealized levels of new project development with increased acceptance, reduced costs, increased predictability of outcomes, and increased value to stakeholders.more » To achieve success in this effort, the MYRP outlines a framework of stakeholder-validated criteria, models, design tools, testing facilities, and assessment protocols that will facilitate the development of next-generation hydropower technologies.« less

Succinonitrile Purification Facility

NASA Technical Reports Server (NTRS)

2003-01-01

The Succinonitrile (SCN) Purification Facility provides succinonitrile and succinonitrile alloys to several NRA selected investigations for flight and ground research at various levels of purity. The purification process employed includes both distillation and zone refining. Once the appropriate purification process is completed, samples are characterized to determine the liquidus and/or solidus temperature, which is then related to sample purity. The lab has various methods for measuring these temperatures with accuracies in the milliKelvin to tenths of milliKelvin range. The ultra-pure SCN produced in our facility is indistinguishable from the standard material provided by NIST to well within the stated +/- 1.5mK of the NIST triple point cells. In addition to delivering material to various investigations, our current activities include process improvement, characterization of impurities and triple point cell design and development. The purification process is being evaluated for each of the four vendors to determine the efficacy of each purification step. We are also collecting samples of the remainder from distillation and zone refining for analysis of the constituent impurities. The large triple point cells developed will contain SCN with a melting point of 58.0642 C +/- 1.5mK for use as a calibration standard for Standard Platinum Resistance Thermometers (SPRTs).

Acoustical standards in engineering acoustics

NASA Astrophysics Data System (ADS)

Burkhard, Mahlon D.

2004-05-01

The Engineering Acoustics Technical Committee is concerned with the evolution and improvement of acoustical techniques and apparatus, and with the promotion of new applications of acoustics. As cited in the Membership Directory and Handbook (2002), the interest areas include transducers and arrays; underwater acoustic systems; acoustical instrumentation and monitoring; applied sonics, promotion of useful effects, information gathering and transmission; audio engineering; acoustic holography and acoustic imaging; acoustic signal processing (equipment and techniques); and ultrasound and infrasound. Evident connections between engineering and standards are needs for calibration, consistent terminology, uniform presentation of data, reference levels, or design targets for product development. Thus for the acoustical engineer standards are both a tool for practices, for communication, and for comparison of his efforts with those of others. Development of many standards depends on knowledge of the way products are put together for the market place and acoustical engineers provide important input to the development of standards. Acoustical engineers and members of the Engineering Acoustics arm of the Society both benefit from and contribute to the Acoustical Standards of the Acoustical Society.

SOI-CMOS Process for Monolithic, Radiation-Tolerant, Science-Grade Imagers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, George; Lee, Adam

In Phase I, Voxtel worked with Jazz and Sandia to document and simulate the processes necessary to implement a DH-BSI SOI CMOS imaging process. The development is based upon mature SOI CMOS process at both fabs, with the addition of only a few custom processing steps for integration and electrical interconnection of the fully-depleted photodetectors. In Phase I, Voxtel also characterized the Sandia process, including the CMOS7 design rules, and we developed the outline of a process option that included a “BOX etch”, that will permit a “detector in handle” SOI CMOS process to be developed The process flows weremore » developed in cooperation with both Jazz and Sandia process engineers, along with detailed TCAD modeling and testing of the photodiode array architectures. In addition, Voxtel tested the radiation performance of the Jazz’s CA18HJ process, using standard and circular-enclosed transistors.« less

Finding-specific display presets for computed radiography soft-copy reading.

PubMed

Andriole, K P; Gould, R G; Webb, W R

1999-05-01

Much work has been done to optimize the display of cross-sectional modality imaging examinations for soft-copy reading (i.e., window/level tissue presets, and format presentations such as tile and stack modes, four-on-one, nine-on-one, etc). Less attention has been paid to the display of digital forms of the conventional projection x-ray. The purpose of this study is to assess the utility of providing presets for computed radiography (CR) soft-copy display, based not on the window/level settings, but on processing applied to the image optimized for visualization of specific findings, pathologies, etc (i.e., pneumothorax, tumor, tube location). It is felt that digital display of CR images based on finding-specific processing presets has the potential to: speed reading of digital projection x-ray examinations on soft copy; improve diagnostic efficacy; standardize display across examination type, clinical scenario, important key findings, and significant negatives; facilitate image comparison; and improve confidence in and acceptance of soft-copy reading. Clinical chest images are acquired using an Agfa-Gevaert (Mortsel, Belgium) ADC 70 CR scanner and Fuji (Stamford, CT) 9000 and AC2 CR scanners. Those demonstrating pertinent findings are transferred over the clinical picture archiving and communications system (PACS) network to a research image processing station (Agfa PS5000), where the optimal image-processing settings per finding, pathologic category, etc, are developed in conjunction with a thoracic radiologist, by manipulating the multiscale image contrast amplification (Agfa MUSICA) algorithm parameters. Soft-copy display of images processed with finding-specific settings are compared with the standard default image presentation for 50 cases of each category. Comparison is scored using a 5-point scale with the positive scale denoting the standard presentation is preferred over the finding-specific processing, the negative scale denoting the finding-specific processing is preferred over the standard presentation, and zero denoting no difference. Processing settings have been developed for several findings including pneumothorax and lung nodules, and clinical cases are currently being collected in preparation for formal clinical trials. Preliminary results indicate a preference for the optimized-processing presentation of images over the standard default, particularly by inexperienced radiology residents and referring clinicians.

Process of prototyping coronary stents from biodegradable Fe-Mn alloys.

PubMed

Hermawan, Hendra; Mantovani, Diego

2013-11-01

Biodegradable stents are considered to be a recent innovation, and their feasibility and applicability have been proven in recent years. Research in this area has focused on materials development and biological studies, rather than on how to transform the developed biodegradable materials into the stent itself. Currently available stent technology, the laser cutting-based process, might be adapted to fabricate biodegradable stents. In this work, the fabrication, characterization and testing of biodegradable Fe-Mn stents are described. A standard process for fabricating and testing stainless steel 316L stents was referred to. The influence of process parameters on the physical, metallurgical and mechanical properties of the stents, and the quality of the produced stents, were investigated. It was found that some steps of the standard process such as laser cutting can be directly applied, but changes to parameters are needed for annealing, and alternatives are needed to replace electropolishing. Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

What's Learned First, What's Learned Together? Developing a Yearlong Plan from the K-12 College and Career Ready Standards for English Language Arts and Literacy. From the College and Career Ready Standards to Teaching and Learning in the Classroom: A Series of Resources for Teachers. Updated August 2015

ERIC Educational Resources Information Center

Mancevice, Nicole; Lozano, Maritza; Jones, Barbara; Tobiason, Glory; Heritage, Margaret; Chang, Sandy; Herman, Joan

2015-01-01

This resource is part of a series produced by the Center for Standards and Assessment Implementation (CSAI) to assist educators as they use College and Career Ready Standards (CCRS) to plan instruction for diverse learners. Although the processes described in this resource use the Common Core State Standards (CCSS; National Governors Association…

Zinc thermal spray coatings for reinforced concrete: An AWS process standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sulit, R.A.

Zinc and aluminum thermal spray coatings (TSC) have been used for lining concrete weir in Great Britain since the 1950`s to maintain the dimensions of the weir for flow control concomitant with reduced wear and erosion of the concrete surfaces. This paper reports the development and the content of the ANSI/AWS C2.20-XX standard for the application of An TSC on concrete using flame and arc spray processes. This standard is formatted as an industrial process instruction: job description; safety; feedstock materials; equipment; a step-by-step method for surface preparation, thermal spraying; quality control; repair and maintenance of surface preparation, thermal spraying;more » quality control; repair and maintenance of Zn TSC on concrete; and a Job Control Record. Job planning and training and certification requirements are presented for An TSC inspectors and thermal spray operators. Four annexes are included in the standard: (a) historical summary of Zn TSC on concrete (b) sample job control record; (c) thermal spray operator qualification; and (d) portable adhesion testing for An TSC on concrete. This standard is based on the current literature and industrial equipment, process, and practices.« less

metAlignID: a high-throughput software tool set for automated detection of trace level contaminants in comprehensive LECO two-dimensional gas chromatography time-of-flight mass spectrometry data.

PubMed

Lommen, Arjen; van der Kamp, Henk J; Kools, Harrie J; van der Lee, Martijn K; van der Weg, Guido; Mol, Hans G J

2012-11-09

A new alternative data processing tool set, metAlignID, is developed for automated pre-processing and library-based identification and concentration estimation of target compounds after analysis by comprehensive two-dimensional gas chromatography with mass spectrometric detection. The tool set has been developed for and tested on LECO data. The software is developed to run multi-threaded (one thread per processor core) on a standard PC (personal computer) under different operating systems and is as such capable of processing multiple data sets simultaneously. Raw data files are converted into netCDF (network Common Data Form) format using a fast conversion tool. They are then preprocessed using previously developed algorithms originating from metAlign software. Next, the resulting reduced data files are searched against a user-composed library (derived from user or commercial NIST-compatible libraries) (NIST=National Institute of Standards and Technology) and the identified compounds, including an indicative concentration, are reported in Excel format. Data can be processed batch wise. The overall time needed for conversion together with processing and searching of 30 raw data sets for 560 compounds is routinely within an hour. The screening performance is evaluated for detection of pesticides and contaminants in raw data obtained after analysis of soil and plant samples. Results are compared to the existing data-handling routine based on proprietary software (LECO, ChromaTOF). The developed software tool set, which is freely downloadable at www.metalign.nl, greatly accelerates data-analysis and offers more options for fine-tuning automated identification toward specific application needs. The quality of the results obtained is slightly better than the standard processing and also adds a quantitative estimate. The software tool set in combination with two-dimensional gas chromatography coupled to time-of-flight mass spectrometry shows great potential as a highly-automated and fast multi-residue instrumental screening method. Copyright © 2012 Elsevier B.V. All rights reserved.

Distance Education and Training Council Constitution and Bylaws. 2012 Edition

ERIC Educational Resources Information Center

Distance Education and Training Council, 2012

2012-01-01

The mission of the Distance Education and Training Council (hereinafter referred to as the Council or DETC) is to promote, by means of standard-setting, evaluation, and consultation processes, the development and maintenance of high educational and ethical standards in education and training programs delivered through distance learning. The…

Structurally Sound Statistics Instruction

ERIC Educational Resources Information Center

Casey, Stephanie A.; Bostic, Jonathan D.

2016-01-01

The Common Core's Standards for Mathematical Practice (SMP) call for all K-grade 12 students to develop expertise in the processes and proficiencies of doing mathematics. However, the Common Core State Standards for Mathematics (CCSSM) (CCSSI 2010) as a whole addresses students' learning of not only mathematics but also statistics. This situation…

Handwriting in Lebanese Bigraphic Children: Standardization of the BHK Scale

ERIC Educational Resources Information Center

Matta Abizeid, Carla; Tabsh Nakib, Amira; Younès Harb, Céleste; Ghantous Faddoul, Shereen; Albaret, Jean-Michel

2017-01-01

Educational systems in Lebanon are bilingual. They simultaneously impose two handwriting systems in Arabic and Latin. This historically driven situation could constitute a significant impact on the process and development of handwriting skills. Using an accurate and valid handwriting evaluation tool standardized for the Lebanese population is a…

ISO 9000 Quality Systems: Application to Higher Education.

ERIC Educational Resources Information Center

Clery, Roger G.

This paper describes and explains the 20 elements of the International Organization for Standards 9000 (ISO 9000) series, a model for quality assurance in the business processes of design/development, production, installation and servicing. The standards were designed in 1987 to provide a common denominator for business quality particularly to…

Culinary Arts Hospitality Symposium Planning Guide.

ERIC Educational Resources Information Center

Borgie, Karen; Wang, Yeimei

This guide was developed as part of a project to standardize California's statewide culinary arts curriculum based on industry guidelines and standards. It details a process that California community colleges can use to plan a hospitality symposium that will accomplish the following objectives: provide students with a forum to demonstrate their…

AIDS Education and Citizenship Development in a University/K-12 Partnership.

ERIC Educational Resources Information Center

Mitchell, James M.

The move toward standards-based instruction calls for greater student involvement in the learning process. Cooperative learning is widely used as many standards-based school departments advocate greater employment of constructivist classrooms as the most appropriate vehicle of instruction. During academic year 2002-03, 42 students from California…

Qualitative Analysis on Stage: Making the Research Process More Public.

ERIC Educational Resources Information Center

Anfara, Vincent A., Jr.; Brown, Kathleen M.

The increased use of qualitative research methods has spurred interest in developing formal standards for assessing its validity. These standards, however, fall short if they do not include public disclosure of methods as a criterion. The researcher must be accountable in documenting the actions associated with establishing internal validity…

A Competency-Based Framework for Graduate-Level Health Educators.

ERIC Educational Resources Information Center

American Alliance for Health, Physical Education, Recreation and Dance, Reston, VA. American Association for Health Education.

This document builds on the 1997 Standards for the Preparation of Graduate-Level Health Educators by including expanded content descriptors and objectives for the graduate level competencies. It begins by discussing evolution of health education competencies; chronology of the graduate standard development process; benefits of graduate level…

Standards for Teleprocessing; New Approaches for New Needs.

ERIC Educational Resources Information Center

Istvan, Edwin J.

The rapidly expanding use of teleprocessing, which is taken to mean automated data processing (ADP) which makes direct use of data transmission via switched or long distance non-switched telecommunications facilities, has highlighted the urgent need for the development of standards for data communications and the computer-communications interface.…

Communication and Representation as Elements in Mathematical Literacy

ERIC Educational Resources Information Center

Thompson, Denisse R.; Chappell, Michaele F.

2007-01-01

The process standards of communication and representation in the "Principles and Standards for School Mathematics" are critical tools to help students develop mathematical literacy. In the mathematics classroom, students need to be encouraged to use speaking, listening, reading, and writing to communicate their understanding of mathematics words,…

The Structuring of Shared Voluntary Standards in the U.S. Semiconductor Industry: Communicating to Reach Agreement.

ERIC Educational Resources Information Center

Browning, Larry D.; Beyer, Janice M.

1998-01-01

Contributes to scholarship on organizational communication by tracing how voluntary cooperative standards were developed for the semiconductor industry through reflexive communication processes initiated by the SEMATECH consortium. Analyzes seven pivotal incidents that show how increased communication produced new provinces of meaning, actions,…

Application of industry-standard guidelines for the validation of avionics software

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Shagnea, Anita M.

1990-01-01

The application of industry standards to the development of avionics software is discussed, focusing on verification and validation activities. It is pointed out that the procedures that guide the avionics software development and testing process are under increased scrutiny. The DO-178A guidelines, Software Considerations in Airborne Systems and Equipment Certification, are used by the FAA for certifying avionics software. To investigate the effectiveness of the DO-178A guidelines for improving the quality of avionics software, guidance and control software (GCS) is being developed according to the DO-178A development method. It is noted that, due to the extent of the data collection and configuration management procedures, any phase in the life cycle of a GCS implementation can be reconstructed. Hence, a fundamental development and testing platform has been established that is suitable for investigating the adequacy of various software development processes. In particular, the overall effectiveness and efficiency of the development method recommended by the DO-178A guidelines are being closely examined.

Advantages and difficulties of implementation of the international GNA standards in sustainable mining development. (Invited)

NASA Astrophysics Data System (ADS)

Masaitis, A.

2013-12-01

Conflicts in the development of mining projects are now common between the mining proponents, NGO's and communities. These conflicts can sometimes be alleviated by early development of modes of communication, and a formal discussion format that allows airing of concerns and potential resolution of problems. One of the methods that can formalize this process is to establish a Good Neighbor Agreement (GNA), which deals specifically with challenges in relationships between mining operations and the local communities. It is a new practice related to mining operations that are oriented toward social needs and concerns of local communities that arise during the normal life of a mine, which can achieve sustainable mining practices in both developing and developed countries. The GNA project being currently developed at the University of Nevada, Reno in cooperation with the Newmont Mining Corporation has a goal to create an open company/community dialog that is based on the international standards and that will help identify and address sociological and environmental concerns associated with mining, as well as find methods for communication and conflict resolution. GNA standards should be based on trust doctrine, open information access, and community involvement in the decision making process. It should include the following components: emergency response and community communications; environmental issues, including air and water quality standards; reclamation and recultivation; socio-economic issues: transportation, safety, training, and local hiring; and financial issues, particularly related to mitigation offsets and community needs. The GNA standards help identify and evaluate conflict criteria in mining/community relationships; determine the status of concerns; focus on the local political and government systems; separate the acute and the chronic concerns; determine the role and responsibilities of stakeholders; analyze problem resolution feasibility; maintain the community involvement and support through economic benefits and environmental safeguards; develop options for the concerns resolution; develop and manage short and long-term plans. Difficulties in establishing the GNA standards include identification of the full list of stakeholders, lack of responsible environmental protection practices, dependence on the government and political system, lack of will to disclose full information to the public. It is further complicated by the lack of insurance/bonding policies, and by the lack of audit and monitoring that could determine the level of exposure of the local community and the environment to the contaminants released at the mine sites. Since many problems of mines can occur during closure and post-closure, GNA's should address those issues also. Determined the process for the GNA implementation as a conflict prevention/resolution tool, analyzed conflict/concerns criteria associated with mining operations, determined the role of the stakeholders, worked out the process of stakeholders monitoring, carried out the sociological survey of the stakeholders and the community. Frequent conflicts between mining companies and surrounding communities that lead to work disruptions or even mine closures show the necessity of a less confrontational approach to environmental and social justice. Establishment of GNA standards for use in both developed and developing nations can decrease these conflicts.

Achieving Innovation and Affordability Through Standardization of Materials Development and Testing

NASA Technical Reports Server (NTRS)

Bray, M. H.; Zook, L. M.; Raley, R. E.; Chapman, C.

2011-01-01

The successful expansion of development, innovation, and production within the aeronautics industry during the 20th century was facilitated by collaboration of government agencies with the commercial aviation companies. One of the initial products conceived from the collaboration was the ANC-5 Bulletin, first published in 1937. The ANC-5 Bulletin had intended to standardize the requirements of various government agencies in the design of aircraft structure. The national space policy shift in priority for NASA with an emphasis on transferring the travel to low earth orbit to commercial space providers highlights an opportunity and a need for the national and global space industries. The same collaboration and standardization that is documented and maintained by the industry within MIL-HDBK-5 (MMPDS-01) and MIL-HBDK-17 (nonmetallic mechanical properties) can also be exploited to standardize the thermal performance properties, processing methods, test methods, and analytical methods for use in aircraft and spacecraft design and associated propulsion systems. In addition to the definition of thermal performance description and standardization, the standardization for test methods and analysis for extreme environments (high temperature, cryogenics, deep space radiation, etc) would also be highly valuable to the industry. Its subsequent revisions and conversion to MIL-HDBK-5 and then MMPDS-01 established and then expanded to contain standardized mechanical property design values and other related design information for metallic materials used in aircraft, missiles, and space vehicles. It also includes guidance on standardization of composition, processing, and analytical methods for presentation and inclusion into the handbook. This standardization enabled an expansion of the technologies to provide efficiency and reliability to the consumers. It can be established that many individual programs within the government agencies have been overcome with development costs generated from these nonstandard requirements. Without industry standardization and acceptance, the programs are driven to shoulder the costs of determining design requirements, performance criteria, and then material qualification and certification. A significant investment that the industry could make to both reduce individual program development costs and schedules while expanding commercial space flight capabilities would be to invest in standardizing material performance properties for high temperature, cryogenic, and deep space environments for both metallic and nonmetallic materials.

Development of noise emission measurement specifications for color printing multifunctional devices

NASA Astrophysics Data System (ADS)

Kimizuka, Ikuo

2005-09-01

Color printing (including copying) is becoming more popular application in home, as well as in offices. Existing de jule and/or industrial standards (such as ISO 7779, ECMA-74, ANSI S12.10 series, etc.), however, state only monochrome patterns, which are mainly intended for acoustic noise testing of mechanical impact type printers. This paper discusses the key issues and corresponding resolutions for development of color printing patterns for acoustic noise measurements. The results of these technical works will be published by JBMS-74 (new industry standard of JBMIA within 2005), and hopefully be the technical basis of updating other standards mentioned above. This paper also shows the development processes and key features of proposed patterns.

The Advancement of Cool Roof Standards in China from 2010 to 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ge, Jing; Levinson, Ronnen M.

Since the initiation of the U.S.-China Clean Energy Research Center-Building Energy Efficiency (CERC-BEE) cool roof research collaboration between the Lawrence Berkeley National Laboratory Heat Island Group and Chinese institutions in 2010, new cool surface credits (insulation trade- offs) have been adopted in Chinese building energy efficiency standards, industry standards, and green building standards. JGJ 75-2012: Design Standard for Energy Efficiency of Residential Buildings in Hot Summer and Warm Winter Zone became the first national level standard to provide cool surface credits. GB/T 50378-2014: Assessment Standard for Green Building is the first national level green building standard that offers points formore » heat island mitigation. JGJ/T 359-2015: Technical Specification for Application of Architectural Reflective Thermal Insulation Coating is the first industry standard that offers cool coating credits for both public and residential buildings in all hot-summer climates (Hot Summer/Cold Winter, Hot Summer/Warm Winter). As of December 2015, eight provinces or municipalities in hot-summer regions have credited cool surfaces credits in their residential and/or public building design standards; five other provinces or municipalities in hot-summer regions recommend, but do not credit, the use of cool surfaces in their building design standards. Cool surfaces could be further advanced in China by including cool roof credits for residential and public building energy efficiency standards in all hot-summer regions; developing a standardized process for natural exposure and aged-property rating of cool roofing products; and adapting the U.S.-developed laboratory aging process for roofing materials to replicate solar reflectance changes induced by natural exposure in China.« less

SCALE: A modular code system for performing Standardized Computer Analyses for Licensing Evaluation. Volume 1, Part 2: Control modules S1--H1; Revision 5

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automated the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system hasmore » been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.3 of the system.« less

Standardization of quality control plans for highway bridges in Europe: COST Action TU 1406

NASA Astrophysics Data System (ADS)

Casas, Joan R.; Matos, Jose Campos e.

2017-09-01

In Europe, as all over the world, the need to manage roadway bridges in an efficient way led to the development of different management systems. Hence, nowadays, many European countries have their own system. Although they present a similar architectural framework, several differences can be appointed. These differences constitute a divergent mechanism that may conduct to different decisions on maintenance actions. Within the roadway bridge management process, the identification of maintenance needs is more effective when developed in a uniform and repeatable manner. This process can be accomplished by the identification of performance indicators and definition of performance goals and key performance indicators (KPI), improving the planning of maintenance strategies. Therefore, a discussion at a European level, seeking to achieve a standardized approach in this subject, will bring significant benefits. Accordingly, a COST Action is under way in Europe with the aim of standardizing the establishment of quality control plans for roadway bridges.

Interdisciplinary group approach to occupational safety and health administration standard: reductions in cost and duplication of effort.

PubMed

Canola, T; Kirkis, E J; Meckes, P F; Pitts, S B

1994-06-01

After the December 1991 publication of the Occupational Safety and Health Administration standard, "Occupational Exposure to Bloodborne Pathogens; Final Rule," medical facilities in the United States were challenged to meet the mandates of this standard with massive training in a relatively short time. An interdisciplinary task force composed of representative members of a major health maintenance organization was charged with the task of developing a training plan for 11 Southern California medical centers and their 42 satellite medical offices. The task force ultimately developed, refined, and distributed a Trainer Guidebook that could be used by a variety of disciplines. This guidebook provided a method by which the information could be disseminated concisely, thoroughly, and promptly. The processes used in this project can be applied to other health care educational situations. The purpose of this article is to share these processes.

Expert system verification and validation study. Delivery 3A and 3B: Trip summaries

NASA Technical Reports Server (NTRS)

French, Scott

1991-01-01

Key results are documented from attending the 4th workshop on verification, validation, and testing. The most interesting part of the workshop was when representatives from the U.S., Japan, and Europe presented surveys of VV&T within their respective regions. Another interesting part focused on current efforts to define industry standards for artificial intelligence and how that might affect approaches to VV&T of expert systems. The next part of the workshop focused on VV&T methods of applying mathematical techniques to verification of rule bases and techniques for capturing information relating to the process of developing software. The final part focused on software tools. A summary is also presented of the EPRI conference on 'Methodologies, Tools, and Standards for Cost Effective Reliable Software Verification and Validation. The conference was divided into discussion sessions on the following issues: development process, automated tools, software reliability, methods, standards, and cost/benefit considerations.

The caBIG Terminology Review Process

PubMed Central

Cimino, James J.; Hayamizu, Terry F.; Bodenreider, Olivier; Davis, Brian; Stafford, Grace A.; Ringwald, Martin

2009-01-01

The National Cancer Institute (NCI) is developing an integrated biomedical informatics infrastructure, the cancer Biomedical Informatics Grid (caBIG®), to support collaboration within the cancer research community. A key part of the caBIG architecture is the establishment of terminology standards for representing data. In order to evaluate the suitability of existing controlled terminologies, the caBIG Vocabulary and Data Elements Workspace (VCDE WS) working group has developed a set of criteria that serve to assess a terminology's structure, content, documentation, and editorial process. This paper describes the evolution of these criteria and the results of their use in evaluating four standard terminologies: the Gene Ontology (GO), the NCI Thesaurus (NCIt), the Common Terminology for Adverse Events (known as CTCAE), and the laboratory portion of the Logical Objects, Identifiers, Names and Codes (LOINC). The resulting caBIG criteria are presented as a matrix that may be applicable to any terminology standardization effort. PMID:19154797

Development and Implementation of a Quality Improvement Process for Echocardiographic Laboratory Accreditation.

PubMed

Gilliland, Yvonne E; Lavie, Carl J; Ahmad, Homaa; Bernal, Jose A; Cash, Michael E; Dinshaw, Homeyar; Milani, Richard V; Shah, Sangeeta; Bienvenu, Lisa; White, Christopher J

2016-03-01

We describe our process for quality improvement (QI) for a 3-year accreditation cycle in echocardiography by the Intersocietal Accreditation Commission (IAC) for a large group practice. Echocardiographic laboratory accreditation by the IAC was introduced in 1996, which is not required but could impact reimbursement. To ensure high-quality patient care and community recognition as a facility committed to providing high-quality echocardiographic services, we applied for IAC accreditation in 2010. Currently, there is little published data regarding the IAC process to meet echocardiography standards. We describe our approach for developing a multicampus QI process for echocardiographic laboratory accreditation during the 3-year cycle of accreditation by the IAC. We developed a quarterly review assessing (1) the variability of the interpretations, (2) the quality of the examinations, (3) a correlation of echocardiographic studies with other imaging modalities, (4) the timely completion of reports, (5) procedure volume, (6) maintenance of Continuing Medical Education credits by faculty, and (7) meeting Appropriate Use Criteria. We developed and implemented a multicampus process for QI during the 3-year accreditation cycle by the IAC for Echocardiography. We documented both the process and the achievement of those metrics by the Echocardiography Laboratories at the Ochsner Medical Institutions. We found the QI process using IAC standards to be a continuous educational experience for our Echocardiography Laboratory physicians and staff. We offer our process as an example and guide for other echocardiography laboratories who wish to apply for such accreditation or reaccreditation. © 2016, Wiley Periodicals, Inc.

Development and demonstration of manufacturing processes for fabricating graphite/Larc-160 polyimide structural elements, part 4, paragraph B

NASA Technical Reports Server (NTRS)

1981-01-01

Progress in the development of processes for production of Celion/LARC-160 graphite-polyimide materials, quality control, and the fabrication of Space Shuttle composite structure components is reported. Liquid chromatographic analyses of three repeatibility batches were performed and are compared to previous Hexcel standard production and to variables study LARC-160 intermediate resins. Development of processes for chopped fiber molding are described and flexural strength, elastic modulus, and other physical and mechanical properties of the molding are presented.

Microfabrication of microsystem-enabled photovoltaic (MEPV) cells

NASA Astrophysics Data System (ADS)

Nielson, Gregory N.; Okandan, Murat; Cruz-Campa, Jose L.; Resnick, Paul J.; Wanlass, Mark W.; Clews, Peggy J.; Pluym, Tammy C.; Sanchez, Carlos A.; Gupta, Vipin P.

2011-02-01

Microsystem-Enabled Photovoltaic (MEPV) cells allow solar PV systems to take advantage of scaling benefits that occur as solar cells are reduced in size. We have developed MEPV cells that are 5 to 20 microns thick and down to 250 microns across. We have developed and demonstrated crystalline silicon (c-Si) cells with solar conversion efficiencies of 14.9%, and gallium arsenide (GaAs) cells with a conversion efficiency of 11.36%. In pursuing this work, we have identified over twenty scaling benefits that reduce PV system cost, improve performance, or allow new functionality. To create these cells, we have combined microfabrication techniques from various microsystem technologies. We have focused our development efforts on creating a process flow that uses standard equipment and standard wafer thicknesses, allows all high-temperature processing to be performed prior to release, and allows the remaining post-release wafer to be reprocessed and reused. The c-Si cell junctions are created using a backside point-contact PV cell process. The GaAs cells have an epitaxially grown junction. Despite the horizontal junction, these cells also are backside contacted. We provide recent developments and details for all steps of the process including junction creation, surface passivation, metallization, and release.

The integration of the risk management process with the lifecycle of medical device software.

PubMed

Pecoraro, F; Luzi, D

2014-01-01

The application of software in the Medical Device (MD) domain has become central to the improvement of diagnoses and treatments. The new European regulations that specifically address software as an important component of MD, require complex procedures to make software compliant with safety requirements, introducing thereby new challenges in the qualification and classification of MD software as well as in the performance of risk management activities. Under this perspective, the aim of this paper is to propose an integrated framework that combines the activities to be carried out by the manufacturer to develop safe software within the development lifecycle based on the regulatory requirements reported in US and European regulations as well as in the relevant standards and guidelines. A comparative analysis was carried out to identify the main issues related to the application of the current new regulations. In addition, standards and guidelines recently released to harmonise procedures for the validation of MD software have been used to define the risk management activities to be carried out by the manufacturer during the software development process. This paper highlights the main issues related to the qualification and classification of MD software, providing an analysis of the different regulations applied in Europe and the US. A model that integrates the risk management process within the software development lifecycle has been proposed too. It is based on regulatory requirements and considers software risk analysis as a central input to be managed by the manufacturer already at the initial stages of the software design, in order to prevent MD failures. Relevant changes in the process of MD development have been introduced with the recognition of software being an important component of MDs as stated in regulations and standards. This implies the performance of highly iterative processes that have to integrate the risk management in the framework of software development. It also makes it necessary to involve both medical and software engineering competences to safeguard patient and user safety.

Understanding and Leveraging a Supplier’s CMMI Efforts: A Guidebook for Acquirers (Revised for V1.3)

DTIC Science & Technology

2011-09-01

and SCAMPI (e.g., ISO /IEC 15288, 12207 , 15504; ISO 9001, EIA 632, and IEEE 1220), or if there are processes to be implemented that are not captured...process descriptions and tailoring as well as any formal audit results. ISO -9001:2008 is a quality management standard for development created and...maintained by the International Organisation for Standardisation ( ISO ). The American National Standard equivalent is ANSI/ ISO /ASQ Q9001-2008

Measuring health care process quality with software quality measures.

PubMed

Yildiz, Ozkan; Demirörs, Onur

2012-01-01

Existing quality models focus on some specific diseases, clinics or clinical areas. Although they contain structure, process, or output type measures, there is no model which measures quality of health care processes comprehensively. In addition, due to the not measured overall process quality, hospitals cannot compare quality of processes internally and externally. To bring a solution to above problems, a new model is developed from software quality measures. We have adopted the ISO/IEC 9126 software quality standard for health care processes. Then, JCIAS (Joint Commission International Accreditation Standards for Hospitals) measurable elements were added to model scope for unifying functional requirements. Assessment (diagnosing) process measurement results are provided in this paper. After the application, it was concluded that the model determines weak and strong aspects of the processes, gives a more detailed picture for the process quality, and provides quantifiable information to hospitals to compare their processes with multiple organizations.

United States Nuclear Rocket Company (USNRC)

NASA Technical Reports Server (NTRS)

Hardin, L. A.

2014-01-01

Historically, the development of advanced space technology has been accomplished by the federal government providing funding to commercial companies through the standard contracting process. Although recently, commercial space ventures, such as Space X, have begun to develop enhanced commercial space launch capabilities, and many companies provide space related services - including satellite development and operations, advanced technology development still requires (and should require) participation by the federal agency assigned this role - the National Aeronautics and Space Administration (NASA). However, this standard funding model may not be the most efficient and stable means of developing the advanced technology systems. And while the federal government does not need to be involved in areas where private industry can reasonably operate, it should remain the leader in supporting the development of new and advanced space technologies to further increase our national capability. And as these technologies mature, then private industry can begin the commercialization process, freeing up resources and funds for NASA to develop the next generations of advanced space technology. In fact, simply examining the last decades of space technology development shows that there is room for improvement. Part of the problem is that there are realistically two space frontiers. There is the commercialization frontier (the realm of Space X and others) and the exploratory frontier (the realm of NASA.). Often technologies that can support the exploratory frontier can also immediately support the commercialization frontier. Yet, these technologies are still developed under the standard model of federal funding and contracting. Is that really the best way to proceed? In this paper, the argument is put forward that a new process is required, a new paradigm. A consortium of federal agencies as well as commercial companies is needed - in a collaborative rather than a contractual relationship.

Information Retrieval System for Japanese Standard Disease-Code Master Using XML Web Service

PubMed Central

Hatano, Kenji; Ohe, Kazuhiko

2003-01-01

Information retrieval system of Japanese Standard Disease-Code Master Using XML Web Service is developed. XML Web Service is a new distributed processing system by standard internet technologies. With seamless remote method invocation of XML Web Service, users are able to get the latest disease code master information from their rich desktop applications or internet web sites, which refer to this service. PMID:14728364

Development of job standards for clinical nutrition therapy for dyslipidemia patients.

PubMed

Kang, Min-Jae; Seo, Jung-Sook; Kim, Eun-Mi; Park, Mi-Sun; Woo, Mi-Hye; Ju, Dal-Lae; Wie, Gyung-Ah; Lee, Song-Mi; Cha, Jin-A; Sohn, Cheong-Min

2015-04-01

Dyslipidemia has significantly contributed to the increase of death and morbidity rates related to cardiovascular diseases. Clinical nutrition service provided by dietitians has been reported to have a positive effect on relief of medical symptoms or reducing the further medical costs. However, there is a lack of researches to identify key competencies and job standard for clinical dietitians to care patients with dyslipidemia. Therefore, the purpose of this study was to analyze the job components of clinical dietitian and develop the standard for professional practice to provide effective nutrition management for dyslipidemia patients. The current status of clinical nutrition therapy for dyslipidemia patients in hospitals with 300 or more beds was studied. After duty tasks and task elements of nutrition care process for dyslipidemia clinical dietitians were developed by developing a curriculum (DACUM) analysis method. The developed job standards were pretested in order to evaluate job performance, difficulty, and job standards. As a result, the job standard included four jobs, 18 tasks, and 53 task elements, and specific job description includes 73 basic services and 26 recommended services. When clinical dietitians managing dyslipidemia patients performed their practice according to this job standard for 30 patients the job performance rate was 68.3%. Therefore, the job standards of clinical dietitians for clinical nutrition service for dyslipidemia patients proposed in this study can be effectively used by hospitals.

75 FR 35011 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... Processes Manual Incorporating Proposed Revisions to the Reliability Standards Development Process. Filed..., June 21, 2010. Take notice that the Commission received the following electric reliability filings: Docket Numbers: RR10-12-000. Applicants: North American Electric Reliability Corp. Description: Petition...

Adaptation and implementation of standardized order sets in a network of multi-hospital corporations in rural Ontario.

PubMed

Meleskie, Jessica; Eby, Don

2009-01-01

Standardized, preprinted or computer-generated physician orders are an attractive project for organizations that wish to improve the quality of patient care. The successful development and maintenance of order sets is a major undertaking. This article recounts the collaborative experience of the Grey Bruce Health Network in adapting and implementing an existing set of physician orders for use in its three hospital corporations. An Order Set Committee composed of primarily front-line staff was given authority over the order set development, approval and implementation processes. This arrangement bypassed the traditional approval process and facilitated the rapid implementation of a large number of order sets in a short time period.

Patient safety related to the use of medical devices: a review and investigation of the current status in the medical device industry.

PubMed

Geissler, Norman; Byrnes, Trevor; Lauer, Wolfgang; Radermacher, Klaus; Kotzsch, Susanne; Korb, Werner; Hölscher, Uvo M

2013-02-01

To reduce the risk of application error, the federal legislator has demanded a development process which is oriented towards usability (DIN EN 62366). Therefore, the research question concerns the application of this standard by medical device manufacturers. Questionnaires were filled out by five trained interviewers in fully standardized face-to-face interviews at MEDICA Düsseldorf 2010. The results are based on 65 interviews. Almost all companies evaluated usability as relevant for product development; however, the understanding of usability through companies can still be improved as well as increasing the amount of trained usability experts in the process.

DICOM for quantitative imaging biomarker development: a standards based approach to sharing clinical data and structured PET/CT analysis results in head and neck cancer research

PubMed Central

Clunie, David; Ulrich, Ethan; Bauer, Christian; Wahle, Andreas; Brown, Bartley; Onken, Michael; Riesmeier, Jörg; Pieper, Steve; Kikinis, Ron; Buatti, John; Beichel, Reinhard R.

2016-01-01

Background. Imaging biomarkers hold tremendous promise for precision medicine clinical applications. Development of such biomarkers relies heavily on image post-processing tools for automated image quantitation. Their deployment in the context of clinical research necessitates interoperability with the clinical systems. Comparison with the established outcomes and evaluation tasks motivate integration of the clinical and imaging data, and the use of standardized approaches to support annotation and sharing of the analysis results and semantics. We developed the methodology and tools to support these tasks in Positron Emission Tomography and Computed Tomography (PET/CT) quantitative imaging (QI) biomarker development applied to head and neck cancer (HNC) treatment response assessment, using the Digital Imaging and Communications in Medicine (DICOM®) international standard and free open-source software. Methods. Quantitative analysis of PET/CT imaging data collected on patients undergoing treatment for HNC was conducted. Processing steps included Standardized Uptake Value (SUV) normalization of the images, segmentation of the tumor using manual and semi-automatic approaches, automatic segmentation of the reference regions, and extraction of the volumetric segmentation-based measurements. Suitable components of the DICOM standard were identified to model the various types of data produced by the analysis. A developer toolkit of conversion routines and an Application Programming Interface (API) were contributed and applied to create a standards-based representation of the data. Results. DICOM Real World Value Mapping, Segmentation and Structured Reporting objects were utilized for standards-compliant representation of the PET/CT QI analysis results and relevant clinical data. A number of correction proposals to the standard were developed. The open-source DICOM toolkit (DCMTK) was improved to simplify the task of DICOM encoding by introducing new API abstractions. Conversion and visualization tools utilizing this toolkit were developed. The encoded objects were validated for consistency and interoperability. The resulting dataset was deposited in the QIN-HEADNECK collection of The Cancer Imaging Archive (TCIA). Supporting tools for data analysis and DICOM conversion were made available as free open-source software. Discussion. We presented a detailed investigation of the development and application of the DICOM model, as well as the supporting open-source tools and toolkits, to accommodate representation of the research data in QI biomarker development. We demonstrated that the DICOM standard can be used to represent the types of data relevant in HNC QI biomarker development, and encode their complex relationships. The resulting annotated objects are amenable to data mining applications, and are interoperable with a variety of systems that support the DICOM standard. PMID:27257542

Patient-Reported Outcome (PRO) Consortium translation process: consensus development of updated best practices.

PubMed

Eremenco, Sonya; Pease, Sheryl; Mann, Sarah; Berry, Pamela

2017-01-01

This paper describes the rationale and goals of the Patient-Reported Outcome (PRO) Consortium's instrument translation process. The PRO Consortium has developed a number of novel PRO measures which are in the process of qualification by the U.S. Food and Drug Administration (FDA) for use in clinical trials where endpoints based on these measures would support product labeling claims. Given the importance of FDA qualification of these measures, the PRO Consortium's Process Subcommittee determined that a detailed linguistic validation (LV) process was necessary to ensure that all translations of Consortium-developed PRO measures are performed using a standardized approach with the rigor required to meet regulatory and pharmaceutical industry expectations, as well as having a clearly defined instrument translation process that the translation industry can support. The consensus process involved gathering information about current best practices from 13 translation companies with expertise in LV, consolidating the findings to generate a proposed process, and obtaining iterative feedback from the translation companies and PRO Consortium member firms on the proposed process in two rounds of review in order to update existing principles of good practice in LV and to provide sufficient detail for the translation process to ensure consistency across PRO Consortium measures, sponsors, and translation companies. The consensus development resulted in a 12-step process that outlines universal and country-specific new translation approaches, as well as country-specific adaptations of existing translations. The PRO Consortium translation process will play an important role in maintaining the validity of the data generated through these measures by ensuring that they are translated by qualified linguists following a standardized and rigorous process that reflects best practice.

Laser ablation ICP-MS applications using the timescales of geologic and biologic processes

NASA Astrophysics Data System (ADS)

Ridley, W. I.

2003-04-01

Geochemists commonly examine geologic processes on timescales of 10^4--10^9 years, and accept that often age relations, e.g., chemical zoning in minerals, can only be measured in a relative sense. The progression of a geologic process that involves geochemical changes may be assessed using trace element microbeam techniques, because the textural, and therefore spatial context, of the analytical scheme can be preserved. However, quantification requires appropriate calibration standards. Laser ablation ICP-MS (LA-ICP-MS) is proving particularly useful now that appropriate standards are becoming available. For instance, trace element zoning patterns in primary sulfides (e.g., pyrite, sphalerite, chalcopyrite, galena) and secondary phases can be inverted to examine relative changes in fluid composition during cycles of hydrothermal mineralization. In turn such information provides insights into fluid sources, migration pathways and depositional processes. These studies have only become possible with the development of appropriate sulfide calibration standards. Another example, made possible with the development of appropriate silicate calibration standards, is the quantitative spatial mapping of REE variations in amphibolite-grade garnets. The recognition that the trace and major elements are decoupled provides a better understanding of the various sources of elements during metamorphic re-equilibration. There is also a growing realization that LA-ICP-MS has potential in biochemical studies, and geochemists have begun to turn their attention in this direction, working closely with biologists. Unlike many geologic processes, the timescales of biologic processes are measured in years to centuries and are frequently amenable to absolute dating. Examples that can be cited where LA-ICP-MS has been applied include annual trace metal variations in tree rings, corals, teeth, bones, bird feathers and various animal vibrissae (sea lion, walrus, wolf). The aim of such studies is to correlate trace element variations with changes in environmental variables. Such studies are proving informative in climate change and habitat management. Again, such variations have been quantified with the availability of appropriate organic, carbonate and phosphate calibration standards.

[Quality process control system of Chinese medicine preparation based on "holistic view"].

PubMed

Wang, Ya-Qi; Jiao, Jiao-Jiao; Wu, Zhen-Feng; Zheng, Qin; Yang, Ming

2018-01-01

"High quality, safety and effectiveness" are the primary principles for the pharmaceutical research and development process in China. The quality of products relies not only on the inspection method, but also on the design and development, process control and standardized management. The quality depends on the process control level. In this paper, the history and current development of quality control of traditional Chinese medicine (TCM) preparations are reviewed systematically. Based on the development model of international drug quality control and the misunderstanding of quality control of TCM preparations, the reasons for impacting the homogeneity of TCM preparations are analyzed and summarized. According to TCM characteristics, efforts were made to control the diversity of TCM, make "unstable" TCM into "stable" Chinese patent medicines, put forward the concepts of "holistic view" and "QbD (quality by design)", so as to create the "holistic, modular, data, standardized" model as the core of TCM preparation quality process control model. Scientific studies shall conform to the actual production of TCM preparations, and be conducive to supporting advanced equipment and technology upgrade, thoroughly applying the scientific research achievements in Chinese patent medicines, and promoting the cluster application and transformation application of TCM pharmaceutical technology, so as to improve the quality and effectiveness of the TCM industry and realize the green development. Copyright© by the Chinese Pharmaceutical Association.

The Importance of Process-Oriented Accessibility Guidelines for Web Developers.

PubMed

Steen-Hansen, Linn; Fagernes, Siri

2016-01-01

Current accessibility research shows that in the web development, the process itself may lead to inaccessible web sites and applications. Common practices typically do not allow sufficient testing. The focus is mainly on complying with minimum standards, and treating accessibility compliance as a sort of bug-fixing process, missing the user perspective. In addition, there is an alarming lack of knowledge and experience with accessibility issues. It has also been argued that bringing accessibility into the development process at all stages is the only way to achieve the highest possible level of accessibility. The work presented in this paper is based on a previous project focusing on guidelines for developing accessible rich Internet applications. The guidelines were classified as either process-oriented or technology-oriented. In this paper, we examine the process-oriented guidelines and give a practical perspective on how these guidelines will make the development process more accessibility-friendly.

Putting the Power of Configuration in the Hands of the Users

NASA Technical Reports Server (NTRS)

Al-Shihabi, Mary-Jo; Brown, Mark; Rigolini, Marianne

2011-01-01

Goal was to reduce the overall cost of human space flight while maintaining the most demanding standards for safety and mission success. In support of this goal, a project team was chartered to replace 18 legacy Space Shuttle nonconformance processes and systems with one fully integrated system Problem Reporting and Corrective Action (PRACA) processes provide a closed-loop system for the identification, disposition, resolution, closure, and reporting of all Space Shuttle hardware/software problems PRACA processes are integrated throughout the Space Shuttle organizational processes and are critical to assuring a safe and successful program Primary Project Objectives Develop a fully integrated system that provides an automated workflow with electronic signatures Support multiple NASA programs and contracts with a single "system" architecture Define standard processes, implement best practices, and minimize process variations

Waste-form development for conversion to portland cement at Los Alamos National Laboratory (LANL) Technical Area 55 (TA-55)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veazey, G.W.; Schake, A.R.; Shalek, P.D.

1996-10-01

The process used at TA-55 to cement transuranic (TRU) waste has experienced several problems with the gypsum-based cement currently being used. Specifically, the waste form could not reliably pass the Waste Isolation Pilot Plant (WIPP) prohibition for free liquid and the Environmental Protection Agency (EPA)-Toxicity Characteristic Leaching Procedure (TCLP) standard for chromium. This report describes the project to develop a portland cement-based waste form that ensures compliance to these standards, as well as other performance standards consisting of homogeneous mixing, moderate hydration temperature, timely initial set, and structural durability. Testing was conducted using the two most common waste streams requiringmore » cementation as of February 1994, lean residue (LR)- and oxalate filtrate (OX)-based evaporator bottoms (EV). A formulation with a pH of 10.3 to 12.1 and a minimum cement-to-liquid (C/L) ratio of 0.80 kg/l for OX-based EV and 0.94 kg/L for LR-based EV was found to pass the performance standards chosen for this project. The implementation of the portland process should result in a yearly cost savings for raw materials of approximately $27,000 over the gypsum process.« less

Development of a peer-review framework for cancer multidisciplinary meetings.

PubMed

Johnson, Claire E; Slavova-Azmanova, Neli; Saunders, Christobel

2017-05-01

There is no mechanism in place for monitoring or quality improvement of cancer multidisciplinary meetings (MDM) in Australia. To develop a peer-review process for quality improvement of MDM. This project involved three phases: (i) development of a draft peer-review framework, supporting documents and peer-review process; (ii) consultation with key stakeholders; (iii) refinement of the framework, documents and processes following a pilot study with three MDM. Feedback indicated that specific standards included in the framework needed to allow the peer reviewers to be flexible relative to the circumstances of the individual MDM. Conversely, feedback identified the need for clear, evidence-based clinical practice guidelines for the conduct of MDM, with accepted standards and objective measures of performance. MDM members were divided about the need to employ peer reviewers from the tumour stream of the MDM under review but agreed that closer involvement of the team under review to support the implementation of recommendations is warranted. We developed an adaptable peer-review framework and process using the current available evidence and guidance. While further research is needed to establish what constitutes best practice in MDM and which processes contribute to improved patient outcomes, the structured peer-review process we describe, when modified using the disease-relevant evidence, could be utilised more broadly as a quality improvement tool. © 2017 Royal Australasian College of Physicians.

Improved compliance by BPM-driven workflow automation.

PubMed

Holzmüller-Laue, Silke; Göde, Bernd; Fleischer, Heidi; Thurow, Kerstin

2014-12-01

Using methods and technologies of business process management (BPM) for the laboratory automation has important benefits (i.e., the agility of high-level automation processes, rapid interdisciplinary prototyping and implementation of laboratory tasks and procedures, and efficient real-time process documentation). A principal goal of the model-driven development is the improved transparency of processes and the alignment of process diagrams and technical code. First experiences of using the business process model and notation (BPMN) show that easy-to-read graphical process models can achieve and provide standardization of laboratory workflows. The model-based development allows one to change processes quickly and an easy adaption to changing requirements. The process models are able to host work procedures and their scheduling in compliance with predefined guidelines and policies. Finally, the process-controlled documentation of complex workflow results addresses modern laboratory needs of quality assurance. BPMN 2.0 as an automation language to control every kind of activity or subprocess is directed to complete workflows in end-to-end relationships. BPMN is applicable as a system-independent and cross-disciplinary graphical language to document all methods in laboratories (i.e., screening procedures or analytical processes). That means, with the BPM standard, a communication method of sharing process knowledge of laboratories is also available. © 2014 Society for Laboratory Automation and Screening.

Applying Standard Independent Verification and Validation (IVV) Techniques Within an Agile Framework: Is There a Compatibility Issue?

NASA Technical Reports Server (NTRS)

Dabney, James B.; Arthur, James Douglas

2017-01-01

Agile methods have gained wide acceptance over the past several years, to the point that they are now a standard management and execution approach for small-scale software development projects. While conventional Agile methods are not generally applicable to large multi-year and mission-critical systems, Agile hybrids are now being developed (such as SAFe) to exploit the productivity improvements of Agile while retaining the necessary process rigor and coordination needs of these projects. From the perspective of Independent Verification and Validation (IVV), however, the adoption of these hybrid Agile frameworks is becoming somewhat problematic. Hence, we find it prudent to question the compatibility of conventional IVV techniques with (hybrid) Agile practices.This paper documents our investigation of (a) relevant literature, (b) the modification and adoption of Agile frameworks to accommodate the development of large scale, mission critical systems, and (c) the compatibility of standard IVV techniques within hybrid Agile development frameworks. Specific to the latter, we found that the IVV methods employed within a hybrid Agile process can be divided into three groups: (1) early lifecycle IVV techniques that are fully compatible with the hybrid lifecycles, (2) IVV techniques that focus on tracing requirements, test objectives, etc. are somewhat incompatible, but can be tailored with a modest effort, and (3) IVV techniques involving an assessment requiring artifact completeness that are simply not compatible with hybrid Agile processes, e.g., those that assume complete requirement specification early in the development lifecycle.

The study of features of the structural organization of the au-tomated information processing system of the collective type

NASA Astrophysics Data System (ADS)

Nikolaev, V. N.; Titov, D. V.; Syryamkin, V. I.

2018-05-01

The comparative assessment of the level of channel capacity of different variants of the structural organization of the automated information processing systems is made. The information processing time assessment model depending on the type of standard elements and their structural organization is developed.

Updated standards and processes for accreditation of echocardiographic laboratories from The European Association of Cardiovascular Imaging.

PubMed

Popescu, Bogdan A; Stefanidis, Alexandros; Nihoyannopoulos, Petros; Fox, Kevin F; Ray, Simon; Cardim, Nuno; Rigo, Fausto; Badano, Luigi P; Fraser, Alan G; Pinto, Fausto; Zamorano, Jose Luis; Habib, Gilbert; Maurer, Gerald; Lancellotti, Patrizio; Andrade, Maria Joao; Donal, Erwan; Edvardsen, Thor; Varga, Albert

2014-07-01

Standards for echocardiographic laboratories were proposed by the European Association of Echocardiography (now the European Association of Cardiovascular Imaging) 7 years ago in order to raise standards of practice and improve the quality of care. Criteria and requirements were published at that time for transthoracic, transoesophageal, and stress echocardiography. This paper reassesses and updates the quality standards to take account of experience and the technical developments of modern echocardiographic practice. It also discusses quality control, the incentives for laboratories to apply for accreditation, the reaccreditation criteria, and the current status and future prospects of the laboratory accreditation process. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2014. For permissions please email: journals.permissions@oup.com.

The evolution of standards for naturally occurring fluorides: an example of scientific due process.

PubMed Central

Clark, N; Corbin, S

1983-01-01

In three quarters of a century of observation and research, the effects of fluoride on dental caries and on general bodily health have been well documented. An expanding data base has allowed a firming up of the guidance and standards for appropriate and safe levels of naturally occurring fluorides for human consumption. Over time, through specific recommendations, the maximum fluoride concentrations deemed appropriate have been altered, but by a process of considered adjustment. Although the Public Health Service has been responsible for the formalization of many of the recommended standards, those recommendations have been based on research from many fronts. In the most recent reconsideration of the standards for natural fluoride, the most exhaustive and thoroughly documented review to date was done, incorporating review by representatives from State, Federal, and private programs. Although the specific example of the development of standards for natural fluoride is used, it should be illustrative of similar processes that are constantly underway in regard to substances and factors with a potential impact on the public's health. Expansion of the data base through research and scientific inquiry will lay the foundation for future reconsideration of the standards for naturally occurring fluorides. PMID:6828638

XML — an opportunity for data standards in the geosciences

NASA Astrophysics Data System (ADS)

Houlding, Simon W.

2001-08-01

Extensible markup language (XML) is a recently introduced meta-language standard on the Web. It provides the rules for development of metadata (markup) standards for information transfer in specific fields. XML allows development of markup languages that describe what information is rather than how it should be presented. This allows computer applications to process the information in intelligent ways. In contrast hypertext markup language (HTML), which fuelled the initial growth of the Web, is a metadata standard concerned exclusively with presentation of information. Besides its potential for revolutionizing Web activities, XML provides an opportunity for development of meaningful data standards in specific application fields. The rapid endorsement of XML by science, industry and e-commerce has already spawned new metadata standards in such fields as mathematics, chemistry, astronomy, multi-media and Web micro-payments. Development of XML-based data standards in the geosciences would significantly reduce the effort currently wasted on manipulating and reformatting data between different computer platforms and applications and would ensure compatibility with the new generation of Web browsers. This paper explores the evolution, benefits and status of XML and related standards in the more general context of Web activities and uses this as a platform for discussion of its potential for development of data standards in the geosciences. Some of the advantages of XML are illustrated by a simple, browser-compatible demonstration of XML functionality applied to a borehole log dataset. The XML dataset and the associated stylesheet and schema declarations are available for FTP download.

Development and Evaluation of a Training Program for Organ Procurement Coordinators Using Standardized Patient Methodology.

PubMed

Odabasi, Orhan; Elcin, Melih; Uzun Basusta, Bilge; Gulkaya Anik, Esin; Aki, Tuncay F; Bozoklar, Ata

2015-12-01

The low rate of consent by next of kin of donor-eligible patients is a major limiting factor in organ transplant. Educating health care professionals about their role may lead to measurable improvements in the process. Our aim was to describe the developmental steps of a communication skills training program for health care professionals using standardized patients and to evaluate the results. We developed a rubric and 5 cases for standardized family interviews. The 20 participants interviewed standardized families at the beginning and at the end of the training course, with interviews followed by debriefing sessions. Participants also provided feedback before and after the course. The performance of each participant was assessed by his or her peers using the rubric. We calculated the generalizability coefficient to measure the reliability of the rubric and used the Wilcoxon signed rank test to compare achievement among participants. Statistical analyses were performed with SPSS software (SPSS: An IBM Company, version 17.0, IBM Corporation, Armonk, NY, USA). All participants received higher scores in their second interview, including novice participants who expressed great discomfort during their first interview. The participants rated the scenarios and the standardized patients as very representative of real-life situations, with feedback forms showing that the interviews, the video recording sessions, and the debriefing sessions contributed to their learning. Our program was designed to meet the current expectations and implications in the field of donor consent from next of kin. Results showed that our training program developed using standardized patient methodology was effective in obtaining the communication skills needed for family interviews during the consent process. The rubric developed during the study was a valid and reliable assessment tool that could be used in further educational activities. The participants showed significant improvements in communication skills.

Colloidal Fouling of Nanofiltration Membranes: Development of a Standard Operating Procedure

PubMed Central

Al Mamun, Md Abdullaha; Bhattacharjee, Subir; Pernitsky, David; Sadrzadeh, Mohtada

2017-01-01

Fouling of nanofiltration (NF) membranes is the most significant obstacle to the development of a sustainable and energy-efficient NF process. Colloidal fouling and performance decline in NF processes is complex due to the combination of cake formation and salt concentration polarization effects, which are influenced by the properties of the colloids and the membrane, the operating conditions of the test, and the solution chemistry. Although numerous studies have been conducted to investigate the influence of these parameters on the performance of the NF process, the importance of membrane preconditioning (e.g., compaction and equilibrating with salt water), as well as the determination of key parameters (e.g., critical flux and trans-membrane osmotic pressure) before the fouling experiment have not been reported in detail. The aim of this paper is to present a standard experimental and data analysis protocol for NF colloidal fouling experiments. The developed methodology covers preparation and characterization of water samples and colloidal particles, pre-test membrane compaction and critical flux determination, measurement of experimental data during the fouling test, and the analysis of that data to determine the relative importance of various fouling mechanisms. The standard protocol is illustrated with data from a series of flat sheet, bench-scale experiments. PMID:28106775

An Extensible Information Grid for Risk Management

NASA Technical Reports Server (NTRS)

Maluf, David A.; Bell, David G.

2003-01-01

This paper describes recent work on developing an extensible information grid for risk management at NASA - a RISK INFORMATION GRID. This grid is being developed by integrating information grid technology with risk management processes for a variety of risk related applications. To date, RISK GRID applications are being developed for three main NASA processes: risk management - a closed-loop iterative process for explicit risk management, program/project management - a proactive process that includes risk management, and mishap management - a feedback loop for learning from historical risks that escaped other processes. This is enabled through an architecture involving an extensible database, structuring information with XML, schemaless mapping of XML, and secure server-mediated communication using standard protocols.

Darwin Core: An Evolving Community-Developed Biodiversity Data Standard

PubMed Central

Wieczorek, John; Bloom, David; Guralnick, Robert; Blum, Stan; Döring, Markus; Giovanni, Renato; Robertson, Tim; Vieglais, David

2012-01-01

Biodiversity data derive from myriad sources stored in various formats on many distinct hardware and software platforms. An essential step towards understanding global patterns of biodiversity is to provide a standardized view of these heterogeneous data sources to improve interoperability. Fundamental to this advance are definitions of common terms. This paper describes the evolution and development of Darwin Core, a data standard for publishing and integrating biodiversity information. We focus on the categories of terms that define the standard, differences between simple and relational Darwin Core, how the standard has been implemented, and the community processes that are essential for maintenance and growth of the standard. We present case-study extensions of the Darwin Core into new research communities, including metagenomics and genetic resources. We close by showing how Darwin Core records are integrated to create new knowledge products documenting species distributions and changes due to environmental perturbations. PMID:22238640

Hearing Device Manufacturers Call for Interoperability and Standardization of Internet and Audiology.

PubMed

Laplante-Lévesque, Ariane; Abrams, Harvey; Bülow, Maja; Lunner, Thomas; Nelson, John; Riis, Søren Kamaric; Vanpoucke, Filiep

2016-10-01

This article describes the perspectives of hearing device manufacturers regarding the exciting developments that the Internet makes possible. Specifically, it proposes to join forces toward interoperability and standardization of Internet and audiology. A summary of why such a collaborative effort is required is provided from historical and scientific perspectives. A roadmap toward interoperability and standardization is proposed. Information and communication technologies improve the flow of health care data and pave the way to better health care. However, hearing-related products, features, and services are notoriously heterogeneous and incompatible with other health care systems (no interoperability). Standardization is the process of developing and implementing technical standards (e.g., Noah hearing database). All parties involved in interoperability and standardization realize mutual gains by making mutually consistent decisions. De jure (officially endorsed) standards can be developed in collaboration with large national health care systems as well as spokespeople for hearing care professionals and hearing device users. The roadmap covers mutual collaboration; data privacy, security, and ownership; compliance with current regulations; scalability and modularity; and the scope of interoperability and standards. We propose to join forces to pave the way to the interoperable Internet and audiology products, features, and services that the world needs.

The Wound CARE Instrument: the process for developing standards for wound management education and programming.

PubMed

Orsted, Heather L; Woodbury, M Gail; Stevenson, Kimberly

2012-06-01

This article describes the collaborative process undertaken by the Canadian Association for Enterostomal Therapy and the Canadian Association of Wound Care in an effort to improve the quality of wound prevention and management education and programming. The end result of this process is the Wound CARE Instrument which promotes an interprofessional, collaborative appraisal process to support the development, adoption or adaption of wound management educational events and programs. © 2011 The Authors. © 2011 Blackwell Publishing Ltd and Medicalhelplines.com Inc.

Older people. Rising SAP.

PubMed

Wilson, Keith

2003-07-10

Single assessment is a complex process involving a variety of agencies, professions and functions. A key decision will be about the development or purchase of a standard assessment tool. A single assessment process lead needs to be appointed with support from senior management in all relevant organisations.

Advanced Map For Real-Time Process Control

NASA Astrophysics Data System (ADS)

Shiobara, Yasuhisa; Matsudaira, Takayuki; Sashida, Yoshio; Chikuma, Makoto

1987-10-01

MAP, a communications protocol for factory automation proposed by General Motors [1], has been accepted by users throughout the world and is rapidly becoming a user standard. In fact, it is now a LAN standard for factory automation. MAP is intended to interconnect different devices, such as computers and programmable devices, made by different manufacturers, enabling them to exchange information. It is based on the OSI intercomputer com-munications protocol standard under development by the ISO. With progress and standardization, MAP is being investigated for application to process control fields other than factory automation [2]. The transmission response time of the network system and centralized management of data exchanged with various devices for distributed control are import-ant in the case of a real-time process control with programmable controllers, computers, and instruments connected to a LAN system. MAP/EPA and MINI MAP aim at reduced overhead in protocol processing and enhanced transmission response. If applied to real-time process control, a protocol based on point-to-point and request-response transactions limits throughput and transmission response. This paper describes an advanced MAP LAN system applied to real-time process control by adding a new data transmission control that performs multicasting communication voluntarily and periodically in the priority order of data to be exchanged.

Training and Validation of Standardized Patients for Unannounced Assessment of Physicians' Management of Depression

ERIC Educational Resources Information Center

Shirazi, Mandana; Sadeghi, Majid; Emami, A.; Kashani, A. Sabouri; Parikh, Sagar; Alaeddini, F.; Arbabi, Mohammad; Wahlstrom, Rolf

2011-01-01

Objective: Standardized patients (SPs) have been developed to measure practitioner performance in actual practice settings, but results have not been fully validated for psychiatric disorders. This study describes the process of creating reliable and valid SPs for unannounced assessment of general-practitioners' management of depression disorders…

Weaving the tapestry of learning: simulation, standardized patients, and virtual communities.

PubMed

Holland, Brian; Landry, Karen; Mountain, Angela; Middlebrooks, Mary Alice; Heim, Deborah; Missildine, Kathy

2013-01-01

Using situated cognition learning theory, nursing faculty developed simulated clinical learning experiences integrating virtual communities and standardized patients. These learning experiences provide authenticity and realism not easily achieved using the individual techniques in isolation. The authors describe the process of weaving these strategies into a rich learning experience for students.

Using Accountability Measures in the Preparation of Preservice Teachers To Make a Difference in the Learning of All Students.

ERIC Educational Resources Information Center

Harris, Larry B.; Salzman, Stephanie; Frantz, Alan; Newsome, Jack; Martin, Martha

This paper describes the transformation of Idaho State University's teacher education program in response to various initiatives regarding educational change. The transformation process involved framing a standards-based preparation program. Developers created a Core Standards for Beginning Teachers that established exit outcomes for prospective…

Conflict of Interest Arises as Concern in Standards Push

ERIC Educational Resources Information Center

Zehr, Mary Ann

2009-01-01

A respected literacy-research organization is asking that a process be put in place to make more transparent potential conflicts of interest that writers of the common national academic standards might have, and to address them. The Literacy Research Association sent a letter Oct. 21 to the groups overseeing the development of common standards…

Higher Education Quality Assessment Model: Towards Achieving Educational Quality Standard

ERIC Educational Resources Information Center

Noaman, Amin Y.; Ragab, Abdul Hamid M.; Madbouly, Ayman I.; Khedra, Ahmed M.; Fayoumi, Ayman G.

2017-01-01

This paper presents a developed higher education quality assessment model (HEQAM) that can be applied for enhancement of university services. This is because there is no universal unified quality standard model that can be used to assess the quality criteria of higher education institutes. The analytical hierarchy process is used to identify the…

Exposures and their determinants in radiographic film processing.

PubMed

Teschke, Kay; Chow, Yat; Brauer, Michael; Chessor, Ed; Hirtle, Bob; Kennedy, Susan M; Yeung, Moira Chan; Ward, Helen Dimich

2002-01-01

Radiographers process X-ray films using developer and fixer solutions that contain chemicals known to cause or exacerbate asthma. In a study in British Columbia, Canada, radiographers' personal exposures to glutaraldehyde (a constituent of the developer chemistry), acetic acid (a constituent of the fixer chemistry), and sulfur dioxide (a byproduct of sulfites, present in both developer and fixer solutions) were measured. Average full-shift exposures to glutaraldehyde, acetic acid, and sulfur dioxide were 0.0009 mg/m3, 0.09 mg/m3, and 0.08 mg/m3, respectively, all more than one order of magnitude lower than current occupational exposure limits. Local exhaust ventilation of the processing machines and use of silver recovery units lowered exposures, whereas the number of films processed per machine and the time spent near the machines increased exposures. Personnel in clinic facilities had higher exposures than those in hospitals. Private clinics were less likely to have local exhaust ventilation and silver recovery units. Their radiographers spent more time in the processor areas and processed more films per machine. Although exposures were low compared with exposure standards, there are good reasons to continue practices to minimize or eliminate exposures: glutaraldehyde and hydroquinone (present in the developer) are sensitizers; the levels at which health effects occur are not yet clearly established, but appear to be lower than current standards; and health effects resulting from the mixture of chemicals are not understood. Developments in digital imaging technology are making available options that do not involve wet-processing of photographic film and therefore could eliminate the use of developer and fixer chemicals altogether.

Software for improving the quality of project management, a case study: international manufacture of electrical equipment

NASA Astrophysics Data System (ADS)

Preradović, D. M.; Mićić, Lj S.; Barz, C.

2017-05-01

Production conditions in today’s world require software support at every stage of production and development of new products, for quality assurance and compliance with ISO standards. In addition to ISO standards such as usual metrics of quality, companies today are focused on other optional standards, such as CMMI (Capability Maturity Model Integrated) or prescribing they own standards. However, while there is intensive progress being made in the PM (project management), there is still a significant number of projects, at the global level, that are failures. These have failed to achieve their goals, within budget or timeframe. This paper focuses on checking the role of software tools through the rate of success in projects implemented in the case of internationally manufactured electrical equipment. The results of this research show the level of contribution of the project management software used to manage and develop new products to improve PM processes and PM functions, and how selection of the software tools affects the quality of PM processes and successfully completed projects.

Collaborative Measurement Development as a Tool in CBPR: Measurement Development and Adaptation within the Cultures of Communities

PubMed Central

Gonzalez, John; Trickett, Edison J.

2014-01-01

This paper describes the processes we engaged in to develop a measurement protocol used to assess the outcomes in a community based suicide and alcohol abuse prevention project with two Alaska Native communities. While the literature on community-based participatory research (CBPR) is substantial regarding the importance of collaborations, few studies have reported on this collaboration in the process of developing measures to assess CBPR projects. We first tell a story of the processes around the standard issues of doing cross-cultural work on measurement development related to areas of equivalence. A second story is provided that highlights how community differences within the same cultural group can affect both the process and content of culturally relevant measurement selection, adaptation, and development. PMID:24748283

Collaborative measurement development as a tool in CBPR: measurement development and adaptation within the cultures of communities.

PubMed

Gonzalez, John; Trickett, Edison J

2014-09-01

This paper describes the processes we engaged into develop a measurement protocol used to assess the outcomes in a community based suicide and alcohol abuse prevention project with two Alaska Native communities. While the literature on community-based participatory research (CBPR) is substantial regarding the importance of collaborations, few studies have reported on this collaboration in the process of developing measures to assess CBPR projects. We first tell a story of the processes around the standard issues of doing cross-cultural work on measurement development related to areas of equivalence. A second story is provided that highlights how community differences within the same cultural group can affect both the process and content of culturally relevant measurement selection, adaptation, and development.

Aerogels Insulate Missions and Consumer Products

NASA Technical Reports Server (NTRS)

2008-01-01

Aspen Aerogels, of Northborough, Massachusetts, worked with NASA through an SBIR contract with Kennedy Space Center to develop a robust, flexible form of aerogel for cryogenic insulation for space shuttle launch applications. The company has since used the same manufacturing process developed under the SBIR award to expand its product offerings into the more commercial realms, making the naturally fragile aerogel available for the first time as a standard insulation that can be handled and installed just like standard insulation.

CellML metadata standards, associated tools and repositories

PubMed Central

Beard, Daniel A.; Britten, Randall; Cooling, Mike T.; Garny, Alan; Halstead, Matt D.B.; Hunter, Peter J.; Lawson, James; Lloyd, Catherine M.; Marsh, Justin; Miller, Andrew; Nickerson, David P.; Nielsen, Poul M.F.; Nomura, Taishin; Subramanium, Shankar; Wimalaratne, Sarala M.; Yu, Tommy

2009-01-01

The development of standards for encoding mathematical models is an important component of model building and model sharing among scientists interested in understanding multi-scale physiological processes. CellML provides such a standard, particularly for models based on biophysical mechanisms, and a substantial number of models are now available in the CellML Model Repository. However, there is an urgent need to extend the current CellML metadata standard to provide biological and biophysical annotation of the models in order to facilitate model sharing, automated model reduction and connection to biological databases. This paper gives a broad overview of a number of new developments on CellML metadata and provides links to further methodological details available from the CellML website. PMID:19380315

The Collaborating States Initiative (CSI) Recommended Process for Developing State Policies and Guidelines to Support Social and Emotional Learning

ERIC Educational Resources Information Center

Dusenbury, Linda; Yoder, Nick

2017-01-01

In the work of the authors with states over the years, they have observed that most follow a similar process when they develop policies or guidelines to support statewide implementation of social and emotional learning (SEL), such as establishing learning goals or standards for student social and emotional competencies, or providing guidance to…

Framework for establishing records control in hospitals as an ISO 9001 requirement.

PubMed

Al-Qatawneh, Lina

2017-02-13

Purpose The purpose of this paper is to present the process followed to control records in a Jordanian private community hospital as an ISO 9001:2008 standard requirement. Design/methodology/approach Under the hospital quality council's supervision, the quality management and development office staff were responsible for designing, planning and implementing the quality management system (QMS) using the ISO 9001:2008 standard. A policy for records control was established. An action plan for establishing the records control was developed and implemented. On completion, a coding system for records was specified to be used by hospital staff. Finally, an internal audit was performed to verify conformity to the ISO 9001:2008 standard requirements. Findings Successful certification by a neutral body ascertained that the hospital's QMS conformed to the ISO 9001:2008 requirements. A framework was developed that describes the records controlling process, which can be used by staff in any healthcare organization wanting to achieve ISO 9001:2008 accreditation. Originality/value Given the increased interest among healthcare organizations to achieve the ISO 9001 certification, the proposed framework for establishing records control is developed and is expected to be a valuable management tool to improve and sustain healthcare quality.

77 FR 41416 - Food and Drug Administration/Xavier University Global Outsourcing Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

... International Initiatives, FDA Inspection Trends, Supply Chain Development, Quality Agreements, Supplier... the World Establishing a Meaningful Supplier Qualification Program Supply Chain Development Finished... Agreements Business Process Management Global Standards Association Near Term Solutions The conference...

Who gets a lung transplant? Assessing the psychosocial decision-making process for transplant listing

PubMed Central

Skillings, Jared Lyon

In the United States, there is a significant shortage of available donor organs. This requires transplant professionals to hold simultaneous, yet divergent roles as (1) advocates for patients who are in need of a lifesaving transplant, and (2) responsible stewards in the allocation of scarce donor organs. In order to balance these roles, most transplant teams utilize a committee based decision-making process to select suitable candidates for the transplant waiting list. These committees use medical and psychosocial criteria to guide their decision to list a patient. Transplant regulatory bodies have established medical standards for identifying appropriate medical candidates for transplantation. However, transplant regulatory bodies have not developed policies to standardize psychosocial criteria for listing patients. This affords transplant centers the autonomy to develop their own psychosocial criteria for determining which patients will be placed on the transplant waiting list. This lack of a standardized policy has resulted in inconsistent psychosocial practices amongst transplant centers nationwide. Since there has been no formal review of the inconsistency in psychosocial policy and practice, this paper seeks to explore the non-standardized psychosocial approach to organ transplant listing. The authors review factors that are relevant to the standardization of the psychosocial decision-making process, including shared decision-making, clinician judgment, bias in decision-making and moral distress in transplant staff. We conclude with a discussion about the impact of these issues on psychosocial practices in solid organ transplantation. PMID:29043272

Curriculum guidelines and standards for dental laser education

NASA Astrophysics Data System (ADS)

White, Joel M.; et al.

1993-07-01

The curriculum guidelines for dental laser education were developed through a consensus process with members from dental academia, industry and private practice. This document was developed at a workshop on the development of standards for dental laser education and laser instructor certification held at the University of California, San Francisco on July 25 and 26, 1992. A working draft is currently being circulated among dental laser educators, researchers, practitioners, organized dentistry and members of industry. After further discussion, modification and review, the final document will be widely distributed and updated annually. Any questions concerning the guidelines may be addressed to the authors of this document in care of the organizer. Suggestions for the improvement of this standard and endorsement of this document are invited.

Standards for the Analysis and Processing of Surface-Water Data and Information Using Electronic Methods

USGS Publications Warehouse

Sauer, Vernon B.

2002-01-01

Surface-water computation methods and procedures are described in this report to provide standards from which a completely automated electronic processing system can be developed. To the greatest extent possible, the traditional U. S. Geological Survey (USGS) methodology and standards for streamflow data collection and analysis have been incorporated into these standards. Although USGS methodology and standards are the basis for this report, the report is applicable to other organizations doing similar work. The proposed electronic processing system allows field measurement data, including data stored on automatic field recording devices and data recorded by the field hydrographer (a person who collects streamflow and other surface-water data) in electronic field notebooks, to be input easily and automatically. A user of the electronic processing system easily can monitor the incoming data and verify and edit the data, if necessary. Input of the computational procedures, rating curves, shift requirements, and other special methods are interactive processes between the user and the electronic processing system, with much of this processing being automatic. Special computation procedures are provided for complex stations such as velocity-index, slope, control structures, and unsteady-flow models, such as the Branch-Network Dynamic Flow Model (BRANCH). Navigation paths are designed to lead the user through the computational steps for each type of gaging station (stage-only, stagedischarge, velocity-index, slope, rate-of-change in stage, reservoir, tide, structure, and hydraulic model stations). The proposed electronic processing system emphasizes the use of interactive graphics to provide good visual tools for unit values editing, rating curve and shift analysis, hydrograph comparisons, data-estimation procedures, data review, and other needs. Documentation, review, finalization, and publication of records are provided for with the electronic processing system, as well as archiving, quality assurance, and quality control.

Simple solution to the medical instrumentation software problem

NASA Astrophysics Data System (ADS)

Leif, Robert C.; Leif, Suzanne B.; Leif, Stephanie H.; Bingue, E.

1995-04-01

Medical devices now include a substantial software component, which is both difficult and expensive to produce and maintain. Medical software must be developed according to `Good Manufacturing Practices', GMP. Good Manufacturing Practices as specified by the FDA and ISO requires the definition and compliance to a software processes which ensures quality products by specifying a detailed method of software construction. The software process should be based on accepted standards. US Department of Defense software standards and technology can both facilitate the development and improve the quality of medical systems. We describe the advantages of employing Mil-Std-498, Software Development and Documentation, and the Ada programming language. Ada provides the very broad range of functionalities, from embedded real-time to management information systems required by many medical devices. It also includes advanced facilities for object oriented programming and software engineering.

Multi-mission space science data processing systems - Past, present, and future

NASA Technical Reports Server (NTRS)

Stallings, William H.

1990-01-01

Packetized telemetry that is consistent with the international Consultative Committee for Space Data Systems (CCSDS) has been baselined for future NASA missions such as Space Station Freedom. Some experiences from past and present multimission systems are examined, including current experiences in implementing a CCSDS standard packetized data processing system, relative to the effectiveness of the multimission approach in lowering life cycle cost and the complexity of meeting new mission needs. It is shown that the continued effort toward standardization of telemetry and processing support will permit the development of multimission systems needed to meet the increased requirements of future NASA missions.

Conceptual Design of Simulation Models in an Early Development Phase of Lunar Spacecraft Simulator Using SMP2 Standard

NASA Astrophysics Data System (ADS)

Lee, Hoon Hee; Koo, Cheol Hea; Moon, Sung Tae; Han, Sang Hyuck; Ju, Gwang Hyeok

2013-08-01

The conceptual study for Korean lunar orbiter/lander prototype has been performed in Korea Aerospace Research Institute (KARI). Across diverse space programs around European countries, a variety of simulation application has been developed using SMP2 (Simulation Modelling Platform) standard related to portability and reuse of simulation models by various model users. KARI has not only first-hand experience of a development of SMP compatible simulation environment but also an ongoing study to apply the SMP2 development process of simulation model to a simulator development project for lunar missions. KARI has tried to extend the coverage of the development domain based on SMP2 standard across the whole simulation model life-cycle from software design to its validation through a lunar exploration project. Figure. 1 shows a snapshot from a visualization tool for the simulation of lunar lander motion. In reality, a demonstrator prototype on the right-hand side of image was made and tested in 2012. In an early phase of simulator development prior to a kick-off start in the near future, targeted hardware to be modelled has been investigated and indentified at the end of 2012. The architectural breakdown of the lunar simulator at system level was performed and the architecture with a hierarchical tree of models from the system to parts at lower level has been established. Finally, SMP Documents such as Catalogue, Assembly, Schedule and so on were converted using a XML(eXtensible Mark-up Language) converter. To obtain benefits of the suggested approaches and design mechanisms in SMP2 standard as far as possible, the object-oriented and component-based design concepts were strictly chosen throughout a whole model development process.

Canadian and U.S. Cooperation for the development of standards and specifications for emerging mapping technologies

USGS Publications Warehouse

Habib, A.; Jarvis, A.; Al-Durgham, M. M.; Lay, J.; Quackenbush, P.; Stensaas, G.; Moe, D.

2007-01-01

The mapping community is witnessing significant advances in available sensors, such as medium format digital cameras (MFDC) and Light Detection and Ranging (LiDAR) systems. In this regard, the Digital Photogrammetry Research Group (DPRG) of the Department of Geomatics Engineering at the University of Calgary has been actively involved in the development of standards and specifications for regulating the use of these sensors in mapping activities. More specifically, the DPRG has been working on developing new techniques for the calibration and stability analysis of medium format digital cameras. This research is essential since these sensors have not been developed with mapping applications in mind. Therefore, prior to their use in Geomatics activies, new standards should be developed to ensure the quality of the developed products. In another front, the persistent improvement in direct geo-referencing technology has led to an expansion in the use of LiDAR systems for the acquisition of dense and accurate surface information. However, the processing of the raw LiDAR data (e.g., ranges, mirror angles, and navigation data) remains a non-transparent process that is proprietary to the manufacturers of LiDAR systems. Therefore, the DPRG has been focusing on the development of quality control procedures to quantify the accuracy of LiDAR output in the absence of initial system measurements. This paper presents a summary of the research conducted by the DPRG together with the British Columbia Base Mapping and Geomatic Services (BMGS) and the United States Geological Survey (USGS) for the development of quality assurance and quality control procedures for emerging mapping technologies. The outcome of this research will allow for the possiblity of introducing North American Standards and Specifications to regulate the use of MFDC and LiDAR systems in the mapping industry.

Personnel involved in the development of nuclear standards in the United States, 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, E.B.

1977-03-01

The development of voluntary nuclear standards in the United States is an active and necessary endeavor of the technical community concerned with the safe, orderly, and economic development of the nuclear potential. There are almost 8000 people presently involved either in writing voluntary standards and codes or in the management and processing roles necessary for their approval and promulgation. This document records the current participation of these people as member, chairman, or secretary of about 900 identified committees and projects. The standards projects are identified with the organizations that are responsible for the preparation, review, and maintenance of the standardsmore » and that provide support through supervisory committees and headquarters staff. The directory has four major sections: personnel, employers, committees, and a KWIC index of committee titles. The directory can be used to identify those nuclear standards projects currently active, to indicate the participation of employers, and to recognize the contributions of individuals to these often interdisciplinary activities.« less

Personnel involved in the development of nuclear standards in the United States, 1975

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, E.B.

The development of voluntary nuclear standards in the United States is an active and necessary endeavor of the technical community concerned with the safe, orderly, and economic development of the nuclear potential. There are almost 8000 people presently involved either in writing voluntary standards and codes or in the management and processing roles necessary for their approval and promulgation. This document records the current participation of these people as member, chairman, or secretary of about 900 identified committees and projects. The standards projects are identified with the organizations that are responsible for the preparation, review, and maintenance of the standardsmore » and that provide support through supervisory committees and headquarters staff. The Directory has four major sections: personnel, employers, committees, and a KWIC Index of committee titles. The Directory can be used to identify those nuclear standards projects currently active, to indicate the participation of employers, and to recognize the contributions of individuals to these often interdisciplinary activities.« less

Development and implementation of energy efficiency standards and labeling programs in China: Progress and challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Khanna, Nina Zheng; Fridley, David

Over the last twenty years, with growing policy emphasis on improving energy efficiency and reducing environmental pollution and carbon emissions, China has implemented a series of new minimum energy performance standards (MEPS) and mandatory and voluntary energy labels to improve appliance energy efficiency. As China begins planning for the next phase of standards and labeling (S&L) program development under the 12th Five Year Plan, an evaluation of recent program developments and future directions is needed to identify gaps that still exist when compared with international best practices. The review of China’s S&L program development and implementation in comparison with majormore » findings from international experiences reveal that there are still areas of improvement, particularly when compared to success factors observed across leading international S&L program. China currently lacks a formalized regulatory process for standard-setting and do not have any legal or regulatory guidance on elements of S&L development such as stakeholder participation or the issue of legal precedence between conflicting national, industrial and local standards. Consequently, China’s laws regarding standard-setting and management of the mandatory energy label program could be updated, as they have not been amended or revised recently and no longer reflects the current situation. While China uses similar principles for choosing target products as the U.S., Australia, EU and Japan, including high energy-consumption, mature industry and testing procedure and stakeholder support, recent MEPS revisions have generally aimed at only eliminating the bottom 20% efficiency of the market. Setting a firm principle based on maximizing energy savings that are technically feasible and economically justified may help improve the stringency of China’s MEPS program and reduce the need for frequent revisions. China also lacks robust survey data and relies primarily on market research data in relatively simple techno-economic analyses used to determine its efficiency standards levels rather than the specific sets of analyses and tools used internationally. Based on international experiences, inclusion of more detailed energy consumption surveys in the Chinese national census surveys and statistical reporting systems could help provide the necessary data for more comprehensive standard-setting analyses. In terms of stakeholder participation in the standards development process, stakeholder participation in China is limited to membership on technical committees responsible for developing or revising standards and generally do not include environmental groups, consumer associations, utilities and other NGOs. Increasing stakeholder involvement to broader interest groups could help garner more support and feedback in the S&L implementation process. China has emerged as a leader in a national verification testing scheme with complementary pilot checktesting projects, but it still faces challenges with insufficient funding, low local awareness amongst some regulatory agencies and resistance to check-testing by some manufacturers, limited product sampling scope, and testing inconsistency and incomparability of results. Thus, further financial and staff resources and capacity building will be needed to overcome these remaining challenges and to expand impacts evaluations to assess the actual effectiveness of implementation and enforcement.« less

[Standards in Medical Informatics: Fundamentals and Applications].

PubMed

Suárez-Obando, Fernando; Camacho Sánchez, Jhon

2013-09-01

The use of computers in medical practice has enabled novel forms of communication to be developed in health care. The optimization of communication processes is achieved through the use of standards to harmonize the exchange of information and provide a common language for all those involved. This article describes the concept of a standard applied to medical informatics and its importance in the development of various applications, such as computational representation of medical knowledge, disease classification and coding systems, medical literature searches and integration of biological and clinical sciences. Copyright © 2013 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

GCS programmer's manual

NASA Technical Reports Server (NTRS)

Lowman, Douglas S.; Withers, B. Edward; Shagnea, Anita M.; Dent, Leslie A.; Hayhurst, Kelly J.

1990-01-01

A variety of instructions to be used in the development of implementations of software for the Guidance and Control Software (GCS) project is described. This document fulfills the Radio Technical Commission for Aeronautics RTCA/DO-178A guidelines, 'Software Considerations in Airborne Systems and Equipment Certification' requirements for document No. 4, which specifies the information necessary for understanding and programming the host computer, and document No. 12, which specifies the software design and implementation standards that are applicable to the software development and testing process. Information on the following subjects is contained: activity recording, communication protocol, coding standards, change management, error handling, design standards, problem reporting, module testing logs, documentation formats, accuracy requirements, and programmer responsibilities.

Improving Patient Safety in Public Hospitals: Developing Standard Measures to Track Medical Errors and Process Breakdowns.

PubMed

Ackerman, Sara L; Gourley, Gato; Le, Gem; Williams, Pamela; Yazdany, Jinoos; Sarkar, Urmimala

2018-03-14

The aim of the study was to develop standards for tracking patient safety gaps in ambulatory care in safety net health systems. Leaders from five California safety net health systems were invited to participate in a modified Delphi process sponsored by the Safety Promotion Action Research and Knowledge Network (SPARKNet) and the California Safety Net Institute in 2016. During each of the three Delphi rounds, the feasibility and validity of 13 proposed patient safety measures were discussed and prioritized. Surveys and transcripts from the meetings were analyzed to understand the decision-making process. The Delphi process included eight panelists. Consensus was reached to adopt 9 of 13 proposed measures. All 9 measures were unanimously considered valid, but concern was expressed about the feasibility of implementing several of the measures. Although safety net health systems face high barriers to standardized measurement, our study demonstrates that consensus can be reached on acceptable and feasible methods for tracking patient safety gaps in safety net health systems. If accompanied by the active participation key stakeholder groups, including patients, clinicians, staff, data system professionals, and health system leaders, the consensus measures reported here represent one step toward improving ambulatory patient safety in safety net health systems.

Workshop on standards in biomass for energy and chemicals: proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milne, T.A.

1984-11-01

In the course of reviewing standards literature, visiting prominent laboratories and research groups, attending biomass meetings and corresponding widely, a whole set of standards needs was identified, the most prominent of which were: biomass standard reference materials, research materials and sample banks; special collections of microorganisms, clonal material, algae, etc.; standard methods of characterization of substrates and biomass fuels; standard tests and methods for the conversion and end-use of biomass; standard protocols for the description, harvesting, preparation, storage, and measurement of productivity of biomass materials in the energy context; glossaries of terms; development of special tests for assay of enzymaticmore » activity and related processes. There was also a recognition of the need for government, professional and industry support of concensus standards development and the dissemination of information on standards. Some 45 biomass researchers and managers met with key NBS staff to identify and prioritize standards needs. This was done through three working panels: the Panel on Standard Reference Materials (SRM's), Research Materials (RM's), and Sample Banks; the Panel on Production and Characterization; and the Panel on Tests and Methods for Conversion and End Use. This report gives a summary of the action items in standards development recommended unanimously by the workshop attendees. The proceedings of the workshop, and an appendix, contain an extensive written record of the findings of the workshop panelists and others regarding presently existing standards and standards issues and needs. Separate abstracts have been prepared for selected papers for inclusion in the Energy Database.« less

Use of WONCA global standards to evaluate family medicine postgraduate education for curriculum development and review in Nepal and Myanmar.

PubMed

Gibson, Christine; Ladak, Farah; Shrestha, Ashis; Yadav, Bharat; Thu, Kyaw; Aye, Tin

2016-09-01

Family medicine is an integral part of primary care within health systems. Globally, training programmes exhibit a great degree of variability in content and skill acquisition. While this may in part reflect the needs of a given setting, there exists standard criteria that all family medicine programmes should consider core activities. WONCA has provided an open-access list of standards that their expert community considers essential for family medicine (GP) post-graduate training. Evaluation of developing or existing training programmes using these standards can provide insight into the degree of variability, gaps within programmes and equally as important, gaps within recommendations. In collaboration with the host institution, two family medicine programmes in Nepal and Myanmar were evaluated based on WONCA global standards. The results of the evaluation demonstrated that such a process can allow for critical review of curriculum in various stages of development and evaluation. The implications of reviewing training programmes according to WONCA standards can lead to enhanced training world-wide and standardisation of training for post-graduate family medicine.

Thermal Model Development for Ares I-X

NASA Technical Reports Server (NTRS)

Amundsen, Ruth M.; DelCorso, Joe

2008-01-01

Thermal analysis for the Ares I-X vehicle has involved extensive thermal model integration, since thermal models of vehicle elements came from several different NASA and industry organizations. Many valuable lessons were learned in terms of model integration and validation. Modeling practices such as submodel, analysis group and symbol naming were standardized to facilitate the later model integration. Upfront coordination of coordinate systems, timelines, units, symbols and case scenarios was very helpful in minimizing integration rework. A process for model integration was developed that included pre-integration runs and basic checks of both models, and a step-by-step process to efficiently integrate one model into another. Extensive use of model logic was used to create scenarios and timelines for avionics and air flow activation. Efficient methods of model restart between case scenarios were developed. Standardization of software version and even compiler version between organizations was found to be essential. An automated method for applying aeroheating to the full integrated vehicle model, including submodels developed by other organizations, was developed.

Problem Solving for Volatilizing Situation in Nursing: Developing Thinking Process Supporting System using NursingNAVI® Contents.

PubMed

Tsuru, Satoko; Wako, Fumiko; Omori, Miho; Sudo, Kumiko

2015-01-01

We have identified three foci of the nursing observation and nursing action respectively. Using these frameworks, we have developed the structured knowledge model for a number of diseases and medical interventions. We developed this structure based NursingNAVI® contents collaborated with some quality centered hospitals. Authors analysed the nursing care documentations of post-gastrectomy patients in light of the standardized nursing care plan in the "NursingNAVI®" developed by ourselves and revealed the "failure to observe" and "failure to document", which leaded to the volatility of the patients' data, conditions and some situation. This phenomenon should have been avoided if nurses had employed a standardized nursing care plan. So, we developed thinking process support system for planning, delivering, recording and evaluating in daily nursing using NursingNAVI® contents. A hospital decided to use NursingNAVI® contents in HIS. It was suggested that the system has availability for nursing OJT and time reduction of planning and recording without volatilizing situation.

Baseliner: an open source, interactive tool for processing sap flux data from thermal dissipation probes.

Treesearch

Andrew C. Oishi; David Hawthorne; Ram Oren

2016-01-01

Estimating transpiration from woody plants using thermal dissipation sap flux sensors requires careful data processing. Currently, researchers accomplish this using spreadsheets, or by personally writing scripts for statistical software programs (e.g., R, SAS). We developed the Baseliner software to help establish a standardized protocol for processing sap...

Ethicted (evaluation process model to improve personalised ICT services for independent living and active ageing)--future scenario.

PubMed

Kärki, Anne; Sävel, Jaana; Sallinen, Merja; Kuusinen, Jere

2013-01-01

ICT innovations are constantly developed, and there is no lack of elderly customers, as the number of the elderly is dramatically increasing. Elderly are willing to use ICT to increase their own safety and social activity, but they need trust on the reliability, accessibility and other ethical aspects of ICT including the maintenance of privacy and self-determination. Ethical standards for ICT are usually not considered. "Ethicted" characterizes an ICT service or product as ethically evaluated. As a standardized procedure, it will not only increase the acceptability of ICT, but also provide services for ICT developers. In the future scenario, ICT under development should be evaluated by using a process model that is specifically built to find the lacks in ethical aspects. The model would then be tested by end-users, the formal and informal care givers, to receive direct feedback for redeveloping solutions. As final outcomes, there should be standards for ICT in elderly care and a service for ICT developers to utilize the evaluation model. This future scenario work included partners from 6 EU member countries. The combination of academic research and industrial/commercial interest of ICT developers should and can bring new value to assistive ICT for elderly care.

Electronic Information Standards to Support Obesity Prevention and Bridge Services Across Systems, 2010-2015.

PubMed

Wiltz, Jennifer L; Blanck, Heidi M; Lee, Brian; Kocot, S Lawrence; Seeff, Laura; McGuire, Lisa C; Collins, Janet

2017-10-26

Electronic information technology standards facilitate high-quality, uniform collection of data for improved delivery and measurement of health care services. Electronic information standards also aid information exchange between secure systems that link health care and public health for better coordination of patient care and better-informed population health improvement activities. We developed international data standards for healthy weight that provide common definitions for electronic information technology. The standards capture healthy weight data on the "ABCDs" of a visit to a health care provider that addresses initial obesity prevention and care: assessment, behaviors, continuity, identify resources, and set goals. The process of creating healthy weight standards consisted of identifying needs and priorities, developing and harmonizing standards, testing the exchange of data messages, and demonstrating use-cases. Healthy weight products include 2 message standards, 5 use-cases, 31 LOINC (Logical Observation Identifiers Names and Codes) question codes, 7 healthy weight value sets, 15 public-private engagements with health information technology implementers, and 2 technical guides. A logic model and action steps outline activities toward better data capture, interoperable systems, and information use. Sharing experiences and leveraging this work in the context of broader priorities can inform the development of electronic information standards for similar core conditions and guide strategic activities in electronic systems.

Electronic Information Standards to Support Obesity Prevention and Bridge Services Across Systems, 2010–2015

PubMed Central

Blanck, Heidi M.; Lee, Brian; Kocot, S. Lawrence; Seeff, Laura; McGuire, Lisa C.; Collins, Janet

2017-01-01

Electronic information technology standards facilitate high-quality, uniform collection of data for improved delivery and measurement of health care services. Electronic information standards also aid information exchange between secure systems that link health care and public health for better coordination of patient care and better-informed population health improvement activities. We developed international data standards for healthy weight that provide common definitions for electronic information technology. The standards capture healthy weight data on the “ABCDs” of a visit to a health care provider that addresses initial obesity prevention and care: assessment, behaviors, continuity, identify resources, and set goals. The process of creating healthy weight standards consisted of identifying needs and priorities, developing and harmonizing standards, testing the exchange of data messages, and demonstrating use-cases. Healthy weight products include 2 message standards, 5 use-cases, 31 LOINC (Logical Observation Identifiers Names and Codes) question codes, 7 healthy weight value sets, 15 public–private engagements with health information technology implementers, and 2 technical guides. A logic model and action steps outline activities toward better data capture, interoperable systems, and information use. Sharing experiences and leveraging this work in the context of broader priorities can inform the development of electronic information standards for similar core conditions and guide strategic activities in electronic systems. PMID:29072985

Determination of diethanolamine or N-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters.

PubMed

Bord, N; Crétier, G; Rocca, J-L; Bailly, C; Souchez, J-P

2004-09-01

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.

Comprehensive Assessment of Struggling Learners Referred to a Graduate Medical Education Remediation Program.

PubMed

Warburton, Karen M; Goren, Eric; Dine, C Jessica

2017-12-01

Implementation of the Next Accreditation System has provided a standardized framework for identifying learners not meeting milestones, but there is as yet no corresponding framework for remediation. We developed a comprehensive assessment process that allows correct diagnosis of a struggling learner's deficit(s) to promote successful remediation. At the University of Pennsylvania, resident learners within the Department of Medicine who are not meeting milestones are referred to the Early Intervention Remediation Committee (EIRC). The EIRC, composed of 14 faculty members with expertise in remediation, uses a standardized process to assess learners' deficits. These faculty members categorize primary deficits as follows: medical knowledge, clinical reasoning, organization and efficiency, professionalism, and communication skills. The standardized process of assessment includes an analysis of the learner's file, direct communication with evaluators, an interview focused on learner perception of the problem, screening for underlying medical or psychosocial issues, and a review of systems for deficits in the 6 core competencies. Participants were surveyed after participating in this process. Over a 2-year period, the EIRC assessed and developed remediation plans for 4% of learners (14 of a total 342). Following remediation and reassessment, the identified problems were satisfactorily resolved in all cases with no disciplinary action. While the process was time intensive, an average of 45 hours per learner, the majority of faculty and residents rated it as positive and beneficial. This structured assessment process identifies targeted areas for remediation and adds to the tools available to Clinical Competency Committees.

The operations manual: a mechanism for improving the research process.

PubMed

Bowman, Ann; Wyman, Jean F; Peters, Jennifer

2002-01-01

The development and use of an operations manual has the potential to improve the capacity of nurse scientists to address the complex, multifaceted issues associated with conducting research in today's healthcare environment. An operations manual facilitates communication, standardizes training and evaluation, and enhances the development and standard implementation of clear policies, processes, and protocols. A 10-year review of methodology articles in relevant nursing journals revealed no attention to this topic. This article will discuss how an operations manual can improve the conduct of research methods and outcomes for both small-scale and large-scale research studies. It also describes the purpose and components of a prototype operations manual for use in quantitative research. The operations manual increases reliability and reproducibility of the research while improving the management of study processes. It can prevent costly and untimely delays or errors in the conduct of research.

The influence of international standards on optomechanical design

NASA Astrophysics Data System (ADS)

Parks, Robert E.

1992-12-01

In the last 10 to 15 years, a considerable body of international standards literature has been published on both mechanical and optical design. We discuss the influence of these internationally developed standards on the design and fabrication of optical systems. We conclude that while there are large benefits to be gained from using these international standards, there will have to be a substantial educational effort at all levels from project scientist to worker on the shop floor to take advantage of the benefits. Many sources to help in this education process are outlined.

Mapping and sequencing the human genome: Science, ethics, and public policy. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

McInerney, J.D.

1993-03-31

Development of Mapping and Sequencing the Human Genome: Science, Ethics, and Public Policy followed the standard process of curriculum development at the Biological Sciences Curriculum Study (BSCS), the process is described. The production of this module was a collaborative effort between BSCS and the American Medical Association (AMA). Appendix A contains a copy of the module. Copies of reports sent to the Department of Energy (DOE) during the development process are contained in Appendix B; all reports should be on file at DOE. Appendix B also contains copies of status reports submitted to the BSCS Board of Directors.

Preschoolers Know, but How Do They Know? Developing a Framework for Early Epistemology Development

ERIC Educational Resources Information Center

Winsor, Denise L.; Blake, Sally

2009-01-01

Two areas that are lacking for the purpose of training high-quality preschool teachers; and constructing developmentally appropriate learning standards and curriculum for preschool children are awareness of early epistemic development (beliefs about knowledge and knowing) and understanding preschoolers' cognitive processes during epistemic…

The Universal Decimal Classification: Some Factors Concerning Its Origins, Development, and Influence.

ERIC Educational Resources Information Center

McIlwaine, I. C.

1997-01-01

Discusses the history and development of the Universal Decimal Classification (UDC). Topics include the relationship with Dewey Decimal Classification; revision process; structure; facet analysis; lack of standard rules for application; application in automated systems; influence of UDC on classification development; links with thesauri; and use…

Collaborative Outcome Measurement: Development of the Nationally Standardized Minimum Data Set

ERIC Educational Resources Information Center

Stephens, Barry C.; Kirchner, Corinne; Orr, Alberta L.; Suvino, Dawn; Rogers, Priscilla

2009-01-01

This article discusses the challenging process of developing a common data set for independent living programs serving older adults who are visually impaired. The three-year project, which included collaborative efforts among many stakeholders that encompass diverse program models, resulted in the development of the Internet-based Nationally…

NetCDF-CF-OPeNDAP: Standards for ocean data interoperability and object lessons for community data standards processes

USGS Publications Warehouse

Hankin, Steven C.; Blower, Jon D.; Carval, Thierry; Casey, Kenneth S.; Donlon, Craig; Lauret, Olivier; Loubrieu, Thomas; Srinivasan, Ashwanth; Trinanes, Joaquin; Godøy, Øystein; Mendelssohn, Roy; Signell, Richard P.; de La Beaujardiere, Jeff; Cornillon, Peter; Blanc, Frederique; Rew, Russ; Harlan, Jack; Hall, Julie; Harrison, D.E.; Stammer, Detlef

2010-01-01

It is generally recognized that meeting society's emerging environmental science and management needs will require the marine data community to provide simpler, more effective and more interoperable access to its data. There is broad agreement, as well, that data standards are the bedrock upon which interoperability will be built. The path that would bring the marine data community to agree upon and utilize such standards, however, is often elusive. In this paper we examine the trio of standards 1) netCDF files; 2) the Climate and Forecast (CF) metadata convention; and 3) the OPeNDAP data access protocol. These standards taken together have brought our community a high level of interoperability for "gridded" data such as model outputs, satellite products and climatological analyses, and they are gaining rapid acceptance for ocean observations. We will provide an overview of the scope of the contribution that has been made. We then step back from the information technology considerations to examine the community or "social" process by which the successes were achieved. We contrast the path by which the World Meteorological Organization (WMO) has advanced the Global Telecommunications System (GTS) - netCDF/CF/OPeNDAP exemplifying a "bottom up" standards process whereas GTS is "top down". Both of these standards are tales of success at achieving specific purposes, yet each is hampered by technical limitations. These limitations sometimes lead to controversy over whether alternative technological directions should be pursued. Finally we draw general conclusions regarding the factors that affect the success of a standards development effort - the likelihood that an IT standard will meet its design goals and will achieve community-wide acceptance. We believe that a higher level of thoughtful awareness by the scientists, program managers and technology experts of the vital role of standards and the merits of alternative standards processes can help us as a community to reach our interoperability goals faster.

Economics of recombinant antibody production processes at various scales: Industry-standard compared to continuous precipitation.

PubMed

Hammerschmidt, Nikolaus; Tscheliessnig, Anne; Sommer, Ralf; Helk, Bernhard; Jungbauer, Alois

2014-06-01

Standard industry processes for recombinant antibody production employ protein A affinity chromatography in combination with other chromatography steps and ultra-/diafiltration. This study compares a generic antibody production process with a recently developed purification process based on a series of selective precipitation steps. The new process makes two of the usual three chromatographic steps obsolete and can be performed in a continuous fashion. Cost of Goods (CoGs) analyses were done for: (i) a generic chromatography-based antibody standard purification; (ii) the continuous precipitation-based purification process coupled to a continuous perfusion production system; and (iii) a hybrid process, coupling the continuous purification process to an upstream batch process. The results of this economic analysis show that the precipitation-based process offers cost reductions at all stages of the life cycle of a therapeutic antibody, (i.e. clinical phase I, II and III, as well as full commercial production). The savings in clinical phase production are largely attributed to the fact that expensive chromatographic resins are omitted. These economic analyses will help to determine the strategies that are best suited for small-scale production in parallel fashion, which is of importance for antibody production in non-privileged countries and for personalized medicine. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

CCSDS - Advancing Spaceflight Technology for International Collaboration

NASA Technical Reports Server (NTRS)

Kearney, Mike; Kiely, Aaron; Yeh, Penshu; Gerner, Jean-Luc; Calzolari, Gian-Paolo; Gifford, Kevin; Merri, Mario; Weiss, Howard

2010-01-01

The Consultative Committee for Space Data Systems (CCSDS) has been developing data and communications standards since 1982, with the objective of providing interoperability for enabling international collaboration for spaceflight missions. As data and communications technology has advanced, CCSDS has progressed to capitalize on existing products when available and suitable for spaceflight, and to develop innovative new approaches when available products fail. The current scope of the CCSDS architecture spans the end-to-end data architecture of a spaceflight mission, with ongoing efforts to develop and standardize cutting-edge technology. This manuscript describes the overall architecture, the position of CCSDS in the standards and international mission community, and some CCSDS processes. It then highlights in detail several of the most interesting and critical technical areas in work right now, and how they support collaborative missions. Special topics include: Delay/Disruption Tolerant Networking (DTN), Asynchronous Message Service (AMS), Multispectral/Hyperspectral Data Compression (MHDC), Coding and Synchronization, Onboard Wireless, Spacecraft Monitor and Control, Navigation, Security, and Time Synchronization/Correlation. Broad international participation in development of CCSDS standards is encouraged.

PHASE I MATERIALS PROPERTY DATABASE DEVELOPMENT FOR ASME CODES AND STANDARDS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju; Lin, Lianshan

2013-01-01

To support the ASME Boiler and Pressure Vessel Codes and Standard (BPVC) in modern information era, development of a web-based materials property database is initiated under the supervision of ASME Committee on Materials. To achieve efficiency, the project heavily draws upon experience from development of the Gen IV Materials Handbook and the Nuclear System Materials Handbook. The effort is divided into two phases. Phase I is planned to deliver a materials data file warehouse that offers a depository for various files containing raw data and background information, and Phase II will provide a relational digital database that provides advanced featuresmore » facilitating digital data processing and management. Population of the database will start with materials property data for nuclear applications and expand to data covering the entire ASME Code and Standards including the piping codes as the database structure is continuously optimized. The ultimate goal of the effort is to establish a sound cyber infrastructure that support ASME Codes and Standards development and maintenance.« less

A model for a knowledge-based system's life cycle

NASA Technical Reports Server (NTRS)

Kiss, Peter A.

1990-01-01

The American Institute of Aeronautics and Astronautics has initiated a Committee on Standards for Artificial Intelligence. Presented here are the initial efforts of one of the working groups of that committee. The purpose here is to present a candidate model for the development life cycle of Knowledge Based Systems (KBS). The intent is for the model to be used by the Aerospace Community and eventually be evolved into a standard. The model is rooted in the evolutionary model, borrows from the spiral model, and is embedded in the standard Waterfall model for software development. Its intent is to satisfy the development of both stand-alone and embedded KBSs. The phases of the life cycle are detailed as are and the review points that constitute the key milestones throughout the development process. The applicability and strengths of the model are discussed along with areas needing further development and refinement by the aerospace community.

ASME Code Efforts Supporting HTGRs

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.K. Morton

2010-09-01

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This reportmore » discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.« less

ASME Code Efforts Supporting HTGRs

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.K. Morton

2011-09-01

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This reportmore » discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.« less

ASME Code Efforts Supporting HTGRs

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.K. Morton

2012-09-01

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This reportmore » discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.« less

Artificial Intelligence Software Engineering (AISE) model

NASA Technical Reports Server (NTRS)

Kiss, Peter A.

1990-01-01

The American Institute of Aeronautics and Astronautics has initiated a committee on standards for Artificial Intelligence. Presented are the initial efforts of one of the working groups of that committee. A candidate model is presented for the development life cycle of knowledge based systems (KBSs). The intent is for the model to be used by the aerospace community and eventually be evolved into a standard. The model is rooted in the evolutionary model, borrows from the spiral model, and is embedded in the standard Waterfall model for software development. Its intent is to satisfy the development of both stand-alone and embedded KBSs. The phases of the life cycle are shown and detailed as are the review points that constitute the key milestones throughout the development process. The applicability and strengths of the model are discussed along with areas needing further development and refinement by the aerospace community.

State Landmarks.

ERIC Educational Resources Information Center

Pappas, Marjorie L.

2003-01-01

Explains how to develop lesson plans to help students become effective researchers using electronic searching tools. Uses a unit developed for Kansas landmarks to discuss information skills, competency standards, inquiry, technology use, information literacy and process skills, finding information, and an example of a research log. (LRW)

First experiences with the implementation of the European standard EN 62304 on medical device software for the quality assurance of a radiotherapy unit

PubMed Central

2014-01-01

Background According to the latest amendment of the Medical Device Directive standalone software qualifies as a medical device when intended by the manufacturer to be used for medical purposes. In this context, the EN 62304 standard is applicable which defines the life-cycle requirements for the development and maintenance of medical device software. A pilot project was launched to acquire skills in implementing this standard in a hospital-based environment (in-house manufacture). Methods The EN 62304 standard outlines minimum requirements for each stage of the software life-cycle, defines the activities and tasks to be performed and scales documentation and testing according to its criticality. The required processes were established for the pre-existent decision-support software FlashDumpComparator (FDC) used during the quality assurance of treatment-relevant beam parameters. As the EN 62304 standard implicates compliance with the EN ISO 14971 standard on the application of risk management to medical devices, a risk analysis was carried out to identify potential hazards and reduce the associated risks to acceptable levels. Results The EN 62304 standard is difficult to implement without proper tools, thus open-source software was selected and integrated into a dedicated development platform. The control measures yielded by the risk analysis were independently implemented and verified, and a script-based test automation was retrofitted to reduce the associated test effort. After all documents facilitating the traceability of the specified requirements to the corresponding tests and of the control measures to the proof of execution were generated, the FDC was released as an accessory to the HIT facility. Conclusions The implementation of the EN 62304 standard was time-consuming, and a learning curve had to be overcome during the first iterations of the associated processes, but many process descriptions and all software tools can be re-utilized in follow-up projects. It has been demonstrated that a standards-compliant development of small and medium-sized medical software can be carried out by a small team with limited resources in a clinical setting. This is of particular relevance as the upcoming revision of the Medical Device Directive is expected to harmonize and tighten the current legal requirements for all European in-house manufacturers. PMID:24655818

First experiences with the implementation of the European standard EN 62304 on medical device software for the quality assurance of a radiotherapy unit.

PubMed

Höss, Angelika; Lampe, Christian; Panse, Ralf; Ackermann, Benjamin; Naumann, Jakob; Jäkel, Oliver

2014-03-21

According to the latest amendment of the Medical Device Directive standalone software qualifies as a medical device when intended by the manufacturer to be used for medical purposes. In this context, the EN 62304 standard is applicable which defines the life-cycle requirements for the development and maintenance of medical device software. A pilot project was launched to acquire skills in implementing this standard in a hospital-based environment (in-house manufacture). The EN 62304 standard outlines minimum requirements for each stage of the software life-cycle, defines the activities and tasks to be performed and scales documentation and testing according to its criticality. The required processes were established for the pre-existent decision-support software FlashDumpComparator (FDC) used during the quality assurance of treatment-relevant beam parameters. As the EN 62304 standard implicates compliance with the EN ISO 14971 standard on the application of risk management to medical devices, a risk analysis was carried out to identify potential hazards and reduce the associated risks to acceptable levels. The EN 62304 standard is difficult to implement without proper tools, thus open-source software was selected and integrated into a dedicated development platform. The control measures yielded by the risk analysis were independently implemented and verified, and a script-based test automation was retrofitted to reduce the associated test effort. After all documents facilitating the traceability of the specified requirements to the corresponding tests and of the control measures to the proof of execution were generated, the FDC was released as an accessory to the HIT facility. The implementation of the EN 62304 standard was time-consuming, and a learning curve had to be overcome during the first iterations of the associated processes, but many process descriptions and all software tools can be re-utilized in follow-up projects. It has been demonstrated that a standards-compliant development of small and medium-sized medical software can be carried out by a small team with limited resources in a clinical setting. This is of particular relevance as the upcoming revision of the Medical Device Directive is expected to harmonize and tighten the current legal requirements for all European in-house manufacturers.

A Novel Process Audit for Standardized Perioperative Handoff Protocols.

PubMed

Pallekonda, Vinay; Scholl, Adam T; McKelvey, George M; Amhaz, Hassan; Essa, Deanna; Narreddy, Spurthy; Tan, Jens; Templonuevo, Mark; Ramirez, Sasha; Petrovic, Michelle A

2017-11-01

A perioperative handoff protocol provides a standardized delivery of communication during a handoff that occurs from the operating room to the postanestheisa care unit or ICU. The protocol's success is dependent, in part, on its continued proper use over time. A novel process audit was developed to help ensure that a perioperative handoff protocol is used accurately and appropriately over time. The Audit Observation Form is used for the Audit Phase of the process audit, while the Audit Averages Form is used for the Data Analysis Phase. Employing minimal resources and using quantitative methods, the process audit provides the necessary means to evaluate the proper execution of any perioperative handoff protocol. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.

Government Open Systems Interconnection Profile (GOSIP) transition strategy

NASA Astrophysics Data System (ADS)

Laxen, Mark R.

1993-09-01

This thesis analyzes the Government Open Systems Interconnection Profile (GOSIP) and the requirements of the Federal Information Processing Standard (FIPS) Publication 146-1. It begins by examining the International Organization for Standardization (ISO) Open Systems Interconnection (OSI) architecture and protocol suites and the distinctions between GOSIP version one and two. Additionally, it explores some of the GOSIP protocol details and discusses the process by which standards organizations have developed their recommendations. Implementation considerations from both government and vendor perspectives illustrate the barriers and requirements faced by information systems managers, as well as basic transition strategies. The result of this thesis is to show a transition strategy through an extended and coordinated period of coexistence due to extensive legacy systems and GOSIP product unavailability. Recommendations for GOSIP protocol standards to include capabilities outside the OSI model are also presented.

The effect of design modifications to the typographical layout of the New York State elementary science learning standards on user preference and process time

NASA Astrophysics Data System (ADS)

Arnold, Jeffery E.

The purpose of this study was to determine the effect of four different design layouts of the New York State elementary science learning standards on user processing time and preference. Three newly developed layouts contained the same information as the standards core curriculum. In this study, the layout of the core guide is referred to as Book. The layouts of the new documents are referred to as Chart, Map, and Tabloid based on the format used to convey content hierarchy information. Most notably, all the new layouts feature larger page sizes, color, page tabs, and an icon based navigation system (IBNS). A convenience sample of 48 New York State educators representing three educator types (16 pre-service teachers, 16 in-service teachers, and 16 administrators) participated in the study. After completing timed tasks accurately, participants scored each layout based on preference. Educator type and layout were the independent variables, and process time and user preference were the dependent variables. A two-factor experimental design with Educator Type as the between variable and with repeated measures on Layout, the within variable, showed a significant difference in process time for Educator Type and Layout. The main effect for Educator Type (F(2, 45) = 8.03, p <.001) was significant with an observed power of .94, and an effect size of .26. The pair-wise comparisons for process time showed that pre-service teachers (p = .02) and administrators (p =.009) completed the assigned tasks more quickly when compared to in-service teachers. The main effect for Layout (F(3, 135) = 4.47, p =.01) was also significant with an observed power of .80, and an effect size of .09. Pair-wise comparisons showed that the newly developed Chart (p = .019) and Map (p = .032) layouts reduced overall process time when compared to the existing state learning standards (Book). The Layout X Educator type interaction was not significant. The same two-factor experimental design on preference, showed the main effect for Layout (F(3, 135) = 28.43, p =.001) was significant. The observed power was 1.0, with an effect size of .39. Pair-wise comparisons for preference scores showed that the Chart (p = .001), Map (p = .001), and Tabloid (p = .001) were preferred over the Book layout. The Layout Type X Educator Type interaction and the main effect for Educator Type were not significant. This study provides evidence that the newly developed design layouts improve usability (as measured by process time and preference scores) of the New York State elementary science learning standard documents. Features in the new layout design, such as the IBNS, may provide a foundation for a visual language and aid users in navigating standard documents across grade level and subject areas. Implications for the next generation of standard documents are presented.

Coordination and standardization of federal sedimentation activities

USGS Publications Warehouse

Glysson, G. Douglas; Gray, John R.

1997-01-01

- precipitation information critical to water resources management. Memorandum M-92-01 covers primarily freshwater bodies and includes activities, such as "development and distribution of consensus standards, field-data collection and laboratory analytical methods, data processing and interpretation, data-base management, quality control and quality assurance, and water- resources appraisals, assessments, and investigations." Research activities are not included.

North Carolina Public Schools Facility Standards. A Guide for Planning School Facilities.

ERIC Educational Resources Information Center

Knott, Gerald H.; Lora, James M.; Acker, Marjorie L.; Taynton, Steven; Logan, Gladys B.; Harrell, Ronald C.

The State of North Carolina has developed a planning guide for those in the process of building, enlarging, or renovating school facilities. This guide defines and describes the educational spaces needed to support a modern, comprehensive educational program and sets minimal standards for the types and sizes of spaces required. It serves as a…

Teaching Mathematics to Secondary Students with Emotional and Behavioral Disorders: Challenges and Practical Suggestions for Teachers

ERIC Educational Resources Information Center

Mulcahy, Candace A.; Krezmien, Michael; Maccini, Paula

2014-01-01

While the Common Core State Standards and state learning standards guide teachers in what mathematical content knowledge should be addressed as well as the processes and proficiencies necessary for developing mathematical competence, several student- and teacher-related factors may hinder student access to the general education curriculum for…

Analysis of the Integration of Skill Standards into Community College Curriculum

ERIC Educational Resources Information Center

Aragon, Steven R.; Woo, Hui-Jeong; Marvel, Matthew R.

2005-01-01

The utilization of skill standards in the curriculum development process has become an increasingly prominent aspect of the reform movement in career and technical education (CTE) over the past 10 years. Data were collected across 10 CTE program areas from a nationally representative sample of community colleges. The authors discuss the extent to…

New Structures of Power and Regulation within "Distributed" Education Policy--The Example of the US Common Core State Standards Initiative

ERIC Educational Resources Information Center

Hartong, Sigrid

2016-01-01

This article focuses on the growing development towards new forms of '"distributed" governance within current large-scale educational reforms. The emphasis is on so-called "governance through standards" as a transformative reform complex which manifests itself in a simultaneous process of regulative destabilisation and (global)…