Sample records for standards system needed

  1. Standard cost systems lead to efficiency and profitability.

    PubMed

    Bennett, J P

    1985-09-01

    Today's healthcare managers are finding that business methods such as product line planning, productivity monitoring, and advance cost measurement are necessary to operate an efficient and profitable organization. But to use these methods, managers need information about costs. Specifically, they need costs standards to determine how efficiently and profitably their institutions are operating. To develop a standard cost system, managers must be aware of the kinds of standards used, the motivational effect of standards on employee productivity, the steps necessary for effective implementation and maintenance, and the advantages and disadvantages of a standard cost system.

  2. Why We Should Establish a National System of Standards.

    ERIC Educational Resources Information Center

    Hennen, Thomas J., Jr.

    2000-01-01

    Explains the need to establish a national system of standards for public libraries. Discusses local standards, state standards, and international standards, and suggests adopting a tiered approach including three levels: minimum standards; target standards; and benchmarking standards, as found in total quality management. (LRW)

  3. Modular Power Standard for Space Explorations Missions

    NASA Technical Reports Server (NTRS)

    Oeftering, Richard C.; Gardner, Brent G.

    2016-01-01

    Future human space exploration will most likely be composed of assemblies of multiple modular spacecraft elements with interconnected electrical power systems. An electrical system composed of a standardized set modular building blocks provides significant development, integration, and operational cost advantages. The modular approach can also provide the flexibility to configure power systems to meet the mission needs. A primary goal of the Advanced Exploration Systems (AES) Modular Power System (AMPS) project is to establish a Modular Power Standard that is needed to realize these benefits. This paper is intended to give the space exploration community a "first look" at the evolving Modular Power Standard and invite their comments and technical contributions.

  4. The Need to Apply Medical Device Informatics in Developing Standards for Safe Interoperable Medical Systems.

    PubMed

    Weininger, Sandy; Jaffe, Michael B; Goldman, Julian M

    2017-01-01

    Medical device and health information technology systems are increasingly interdependent with users demanding increased interoperability. Related safety standards must be developed taking into account these systems' perspective. In this article, we describe the current development of medical device standards and the need for these standards to address medical device informatics. Medical device information should be gathered from a broad range of clinical scenarios to lay the foundation for safe medical device interoperability. Five clinical examples show how medical device informatics principles, if applied in the development of medical device standards, could help facilitate the development of safe interoperable medical device systems. These examples illustrate the clinical implications of the failure to capture important signals and device attributes. We provide recommendations relating to the coordination between historically separate standards development groups, some of which focus on safety and effectiveness and others focus on health informatics. We identify the need for a shared understanding among stakeholders and describe organizational structures to promote cooperation such that device-to-device interactions and related safety information are considered during standards development.

  5. The Need to Apply Medical Device Informatics in Developing Standards for Safe Interoperable Medical Systems

    PubMed Central

    Weininger, Sandy; Jaffe, Michael B.; Goldman, Julian M

    2016-01-01

    Medical device and health information technology systems are increasingly interdependent with users demanding increased interoperability. Related safety standards must be developed taking into account this systems perspective. In this article we describe the current development of medical device standards and the need for these standards to address medical device informatics. Medical device information should be gathered from a broad range of clinical scenarios to lay the foundation for safe medical device interoperability. Five clinical examples show how medical device informatics principles, if applied in the development of medical device standards, could help facilitate the development of safe interoperable medical device systems. These examples illustrate the clinical implications of the failure to capture important signals and device attributes. We provide recommendations relating to the coordination between historically separate standards development groups; some which focus on safety and effectiveness, and others that focus on health informatics. We identify the need for a shared understanding among stakeholders and describe organizational structures to promote cooperation such that device-to-device interactions and related safety information are considered during standards development. PMID:27584685

  6. 24 CFR 92.251 - Property standards.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... participating jurisdiction to determine the useful life of major systems through a capital needs assessment of... procedures (Uniform Physical Conditions Standards) pursuant to 24 CFR 5.705. (ix) Capital Needs Assessments... needs of the project through a capital needs assessment of the project. (2) Construction documents and...

  7. Solar PV O&M Standards and Best Practices – Existing Gaps and Improvement Efforts

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Klise, Geoffrey Taylor; Balfour, John R.; Keating, T. J.

    2014-11-01

    As greater numbers of photovoltaic (PV) systems are being installed, operations & maintenance (O&M) activities will need to be performed to ensure the PV system is operating as designed over its useful lifetime. To mitigate risks to PV system availability and performance, standardized procedures for O&M activities are needed to ensure high reliability and long-term system bankability. Efforts are just getting underway to address the need for standard O&M procedures as PV gains a larger share of U.S. generation capacity. Due to the existing landscape of how and where PV is installed, including distributed generation from small and medium PVmore » systems, as well as large, centralized utility-scale PV, O&M activities will require different levels of expertise and reporting, making standards even more important. This report summarizes recent efforts made by solar industry stakeholders to identify the existing standards and best practices applied to solar PV O&M activities, and determine the gaps that have yet to be, or are currently being addressed by industry.« less

  8. Solar PV O&M Standards and Best Practices - Existing Gaps and Improvement Efforts

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Klise, Geoffrey Taylor; Balfour, John R.; Keating, T. J.

    2014-11-01

    As greater numbers of photovoltaic (PV) systems are being installed, operations & maintenance (O&M) activities will need to be performed to ensure the PV system is operating as designed over its useful lifetime. To mitigate risks to PV system availability and performance, standardized procedures for O&M activities are needed to ensure high reliability and long-term system bankability. Efforts are just getting underway to address the need for standard O&M procedures as PV gains a larger share of U.S. generation capacity. Due to the existing landscape of how and where PV is installed, including distributed generation from small and medium PVmore » systems, as well as large, centralized utility-scale PV, O&M activities will require different levels of expertise and reporting, making standards even more important. This report summarizes recent efforts made by solar industry stakeholders to identify the existing standards and best practices applied to solar PV O&M activities, and determine the gaps that have yet to be, or are currently being addressed by industry.« less

  9. Standardization of XML Database Exchanges and the James Webb Space Telescope Experience

    NASA Technical Reports Server (NTRS)

    Gal-Edd, Jonathan; Detter, Ryan; Jones, Ron; Fatig, Curtis C.

    2007-01-01

    Personnel from the National Aeronautics and Space Administration (NASA) James Webb Space Telescope (JWST) Project have been working with various standard communities such the Object Management Group (OMG) and the Consultative Committee for Space Data Systems (CCSDS) to assist in the definition of a common extensible Markup Language (XML) for database exchange format. The CCSDS and OMG standards are intended for the exchange of core command and telemetry information, not for all database information needed to exercise a NASA space mission. The mission-specific database, containing all the information needed for a space mission, is translated from/to the standard using a translator. The standard is meant to provide a system that encompasses 90% of the information needed for command and telemetry processing. This paper will discuss standardization of the XML database exchange format, tools used, and the JWST experience, as well as future work with XML standard groups both commercial and government.

  10. Constellation's Command, Control, Communications and Information (C3I) Architecture

    NASA Technical Reports Server (NTRS)

    Breidenthal, Julian C.

    2007-01-01

    Operations concepts are highly effective for: 1) Developing consensus; 2) Discovering stakeholder needs, goals, objectives; 3) Defining behavior of system components (especially emergent behaviors). An interoperability standard can provide an excellent lever to define the capabilities needed for system evolution. Two categories of architectures are needed in a program of this size are: 1) Generic - Needed for planning, design and construction standards; 2) Specific - Needed for detailed requirement allocations, interface specs. A wide variety of architectural views are needed to address stakeholder concerns, including: 1) Physical; 2) Information (structure, flow, evolution); 3) Processes (design, manufacturing, operations); 4) Performance; 5) Risk.

  11. NASA Space Flight Human System Standards

    NASA Technical Reports Server (NTRS)

    Tillman, Barry; Pickett, Lynn; Russo, Dane; Stroud, Ken; Connolly, Jan; Foley, Tico

    2007-01-01

    NASA has begun a new approach to human factors design standards. For years NASA-STD-3000, Manned Systems Integration Standards, has been a source of human factors design guidance for space systems. In order to better meet the needs of the system developers, NASA is revising its human factors standards system. NASA-STD-3000 will be replaced by two documents: set of broad human systems specifications (including both human factors and medical topics) and a human factors design handbook

  12. An Air Quality Data Analysis System for Interrelating Effects, Standards and Needed Source Reductions

    ERIC Educational Resources Information Center

    Larsen, Ralph I.

    1973-01-01

    Makes recommendations for a single air quality data system (using average time) for interrelating air pollution effects, air quality standards, air quality monitoring, diffusion calculations, source-reduction calculations, and emission standards. (JR)

  13. Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage

    NASA Technical Reports Server (NTRS)

    Sibille, L.; Carpenter, P.; Schlagheck, R.; French, R. A.

    2006-01-01

    Experience gained during the Apollo program demonstrated the need for extensive testing of surface systems in relevant environments, including regolith materials similar to those encountered on the lunar surface. As NASA embarks on a return to the Moon, it is clear that the current lunar sample inventory is not only insufficient to support lunar surface technology and system development, but its scientific value is too great to be consumed by destructive studies. Every effort must be made to utilize standard simulant materials, which will allow developers to reduce the cost, development, and operational risks to surface systems. The Lunar Regolith Simulant Materials Workshop held in Huntsville, AL, on January 24 26, 2005, identified the need for widely accepted standard reference lunar simulant materials to perform research and development of technologies required for lunar operations. The workshop also established a need for a common, traceable, and repeatable process regarding the standardization, characterization, and distribution of lunar simulants. This document presents recommendations for the standardization, production and usage of lunar regolith simulant materials.

  14. International perspectives on food safety and regulations - a need for harmonized regulations: perspectives in China.

    PubMed

    Liu, Xiumei

    2014-08-01

    Food safety is a major livelihood issue and a priority concern in China. Since the Food Safety Law of the People's Republic of China was issued in 2009, the food safety control system has been strengthened through, inter alia, the Food Safety Risk Surveillance System, the Food Safety Risk Assessment System and the Food Safety Standards System. In accordance with the Food Safety Law and regulations for implementation, the Ministry of Health released the 'Twelfth Five-year Plan' of Food Safety Standards. The existing 5000 food-related standards will be integrated. Notwithstanding, the supervision system in China needs to be further improved and strengthened. © 2014 Society of Chemical Industry.

  15. A Probabilistic Software System Attribute Acceptance Paradigm for COTS Software Evaluation

    NASA Technical Reports Server (NTRS)

    Morris, A. Terry

    2005-01-01

    Standard software requirement formats are written from top-down perspectives only, that is, from an ideal notion of a client s needs. Despite the exactness of the standard format, software and system errors in designed systems have abounded. Bad and inadequate requirements have resulted in cost overruns, schedule slips and lost profitability. Commercial off-the-shelf (COTS) software components are even more troublesome than designed systems because they are often provided as is and subsequently delivered with unsubstantiated validation of described capabilities. For COTS software, there needs to be a way to express the client s software needs in a consistent and formal manner using software system attributes derived from software quality standards. Additionally, the format needs to be amenable to software evaluation processes that integrate observable evidence garnered from historical data. This paper presents a paradigm that effectively bridges the gap between what a client desires (top-down) and what has been demonstrated (bottom-up) for COTS software evaluation. The paradigm addresses the specification of needs before the software evaluation is performed and can be used to increase the shared understanding between clients and software evaluators about what is required and what is technically possible.

  16. DICOM: a standard for medical imaging

    NASA Astrophysics Data System (ADS)

    Horii, Steven C.; Bidgood, W. Dean

    1993-01-01

    Since 1983, the American College of Radiology (ACR) and the National Electrical Manufacturers Association (NEMA) have been engaged in developing standards related to medical imaging. This alliance of users and manufacturers was formed to meet the needs of the medical imaging community as its use of digital imaging technology increased. The development of electronic picture archiving and communications systems (PACS), which could connect a number of medical imaging devices together in a network, led to the need for a standard interface and data structure for use on imaging equipment. Since medical image files tend to be very large and include much text information along with the image, the need for a fast, flexible, and extensible standard was quickly established. The ACR-NEMA Digital Imaging and Communications Standards Committee developed a standard which met these needs. The standard (ACR-NEMA 300-1988) was first published in 1985 and revised in 1988. It is increasingly available from equipment manufacturers. The current work of the ACR- NEMA Committee has been to extend the standard to incorporate direct network connection features, and build on standards work done by the International Standards Organization in its Open Systems Interconnection series. This new standard, called Digital Imaging and Communication in Medicine (DICOM), follows an object-oriented design methodology and makes use of as many existing internationally accepted standards as possible. This paper gives a brief overview of the requirements for communications standards in medical imaging, a history of the ACR-NEMA effort and what it has produced, and a description of the DICOM standard.

  17. An integrated healthcare information system for end-to-end standardized exchange and homogeneous management of digital ECG formats.

    PubMed

    Trigo, Jesús Daniel; Martínez, Ignacio; Alesanco, Alvaro; Kollmann, Alexander; Escayola, Javier; Hayn, Dieter; Schreier, Günter; García, José

    2012-07-01

    This paper investigates the application of the enterprise information system (EIS) paradigm to standardized cardiovascular condition monitoring. There are many specifications in cardiology, particularly in the ECG standardization arena. The existence of ECG formats, however, does not guarantee the implementation of homogeneous, standardized solutions for ECG management. In fact, hospital management services need to cope with various ECG formats and, moreover, several different visualization applications. This heterogeneity hampers the normalization of integrated, standardized healthcare information systems, hence the need for finding an appropriate combination of ECG formats and a suitable EIS-based software architecture that enables standardized exchange and homogeneous management of ECG formats. Determining such a combination is one objective of this paper. The second aim is to design and develop the integrated healthcare information system that satisfies the requirements posed by the previous determination. The ECG formats selected include ISO/IEEE11073, Standard Communications Protocol for Computer-Assisted Electrocardiography, and an ECG ontology. The EIS-enabling techniques and technologies selected include web services, simple object access protocol, extensible markup language, or business process execution language. Such a selection ensures the standardized exchange of ECGs within, or across, healthcare information systems while providing modularity and accessibility.

  18. Wrestling With a Paradox: Complexity in Interoperability Standards Making for Healthcare Information Systems

    NASA Astrophysics Data System (ADS)

    Pittaway, Jeff; Archer, Norm

    Medical interventions are often delayed or erroneous when information needed for diagnosing or prescribing is missing or unavailable. In support of increased information flows, the healthcare industry has invested substantially in standards intended to specify, routinize, and make uniform the type and format of medical information in clinical healthcare information systems such as Electronic Medical Record systems (EMRs). However, fewer than one in four Canadian physicians have adopted EMRs. Deeper analysis illustrates that physicians may perceive value in standardized EMRs when they need to exchange information in highly structured situations among like participants and like environments. However, standards present restrictive barriers to practitioners when they face equivocal situations, unforeseen contingencies, or exchange information across different environments. These barriers constitute a compelling explanation for at least part of the observed low EMR adoption rates. Our recommendations to improve the perceived value of standardized clinical information systems espouse re-conceptualizing the role of standards to embrace greater flexibility in some areas.

  19. Content of system design descriptions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all themore » attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective.« less

  20. Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

    NASA Technical Reports Server (NTRS)

    Callender, E. David; Steinbacher, Jody

    1989-01-01

    This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

  1. End-user satisfaction analysis on library management system unnes using technology acceptance model towards national standard of integrated library

    NASA Astrophysics Data System (ADS)

    Hardyanto, W.; Purwinarko, A.; Adhi, M. A.

    2018-03-01

    The library which is the gate of the University should be supported by the existence of an adequate information system, to provide excellent service and optimal to every user. Library management system that has been in existence since 2009 needs to be re-evaluated so that the system can meet the needs of both operator and Unnes user in particular, and users from outside Unnes in general. This study aims to evaluate and improve the existing library management system to produce a system that is accountable and able to meet the needs of end users, as well as produce a library management system that is integrated Unnes. Research is directed to produce evaluation report with Technology Acceptance Model (TAM) approach and library management system integrated with the national standard.

  2. The philosophy and limitations of FAA aeromedical standards, policies and procedures.

    DOT National Transportation Integrated Search

    1971-06-01

    Designated Aviation Medical Examiners need available basic information concerning the FAA medical certification system, the philosophy which underlies standards, policy and procedures, and certain limitations of the system. It is through such informa...

  3. Beyond the New Architectures - Enabling Rapid System Configurations

    NASA Technical Reports Server (NTRS)

    Smith, Dan

    2009-01-01

    This presentation slide document reviews the attempts to integrate systems and create common standards for missions. A primary example is telemetry and command sets for satellites. The XML Telemetric and Command Exchange (XTCE) exists, but this is not easy to implement. There is a need for a new standard. The document proposes a method to achieve the standard, and the benefits of using a new standard,

  4. Standardization Efforts for Mechanical Testing and Design of Advanced Ceramic Materials and Components

    NASA Technical Reports Server (NTRS)

    Salem, Jonathan A.; Jenkins, Michael G.

    2003-01-01

    Advanced aerospace systems occasionally require the use of very brittle materials such as sapphire and ultra-high temperature ceramics. Although great progress has been made in the development of methods and standards for machining, testing and design of component from these materials, additional development and dissemination of standard practices is needed. ASTM Committee C28 on Advanced Ceramics and ISO TC 206 have taken a lead role in the standardization of testing for ceramics, and recent efforts and needs in standards development by Committee C28 on Advanced Ceramics will be summarized. In some cases, the engineers, etc. involved are unaware of the latest developments, and traditional approaches applicable to other material systems are applied. Two examples of flight hardware failures that might have been prevented via education and standardization will be presented.

  5. Baobab Laboratory Information Management System: Development of an Open-Source Laboratory Information Management System for Biobanking

    PubMed Central

    Bendou, Hocine; Sizani, Lunga; Reid, Tim; Swanepoel, Carmen; Ademuyiwa, Toluwaleke; Merino-Martinez, Roxana; Meuller, Heimo; Abayomi, Akin

    2017-01-01

    A laboratory information management system (LIMS) is central to the informatics infrastructure that underlies biobanking activities. To date, a wide range of commercial and open-source LIMSs are available and the decision to opt for one LIMS over another is often influenced by the needs of the biobank clients and researchers, as well as available financial resources. The Baobab LIMS was developed by customizing the Bika LIMS software (www.bikalims.org) to meet the requirements of biobanking best practices. The need to implement biobank standard operation procedures as well as stimulate the use of standards for biobank data representation motivated the implementation of Baobab LIMS, an open-source LIMS for Biobanking. Baobab LIMS comprises modules for biospecimen kit assembly, shipping of biospecimen kits, storage management, analysis requests, reporting, and invoicing. The Baobab LIMS is based on the Plone web-content management framework. All the system requirements for Plone are applicable to Baobab LIMS, including the need for a server with at least 8 GB RAM and 120 GB hard disk space. Baobab LIMS is a server–client-based system, whereby the end user is able to access the system securely through the internet on a standard web browser, thereby eliminating the need for standalone installations on all machines. PMID:28375759

  6. Baobab Laboratory Information Management System: Development of an Open-Source Laboratory Information Management System for Biobanking.

    PubMed

    Bendou, Hocine; Sizani, Lunga; Reid, Tim; Swanepoel, Carmen; Ademuyiwa, Toluwaleke; Merino-Martinez, Roxana; Meuller, Heimo; Abayomi, Akin; Christoffels, Alan

    2017-04-01

    A laboratory information management system (LIMS) is central to the informatics infrastructure that underlies biobanking activities. To date, a wide range of commercial and open-source LIMSs are available and the decision to opt for one LIMS over another is often influenced by the needs of the biobank clients and researchers, as well as available financial resources. The Baobab LIMS was developed by customizing the Bika LIMS software ( www.bikalims.org ) to meet the requirements of biobanking best practices. The need to implement biobank standard operation procedures as well as stimulate the use of standards for biobank data representation motivated the implementation of Baobab LIMS, an open-source LIMS for Biobanking. Baobab LIMS comprises modules for biospecimen kit assembly, shipping of biospecimen kits, storage management, analysis requests, reporting, and invoicing. The Baobab LIMS is based on the Plone web-content management framework. All the system requirements for Plone are applicable to Baobab LIMS, including the need for a server with at least 8 GB RAM and 120 GB hard disk space. Baobab LIMS is a server-client-based system, whereby the end user is able to access the system securely through the internet on a standard web browser, thereby eliminating the need for standalone installations on all machines.

  7. Multi-mission space science data processing systems - Past, present, and future

    NASA Technical Reports Server (NTRS)

    Stallings, William H.

    1990-01-01

    Packetized telemetry that is consistent with the international Consultative Committee for Space Data Systems (CCSDS) has been baselined for future NASA missions such as Space Station Freedom. Some experiences from past and present multimission systems are examined, including current experiences in implementing a CCSDS standard packetized data processing system, relative to the effectiveness of the multimission approach in lowering life cycle cost and the complexity of meeting new mission needs. It is shown that the continued effort toward standardization of telemetry and processing support will permit the development of multimission systems needed to meet the increased requirements of future NASA missions.

  8. Information Systems Security Management: A Review and a Classification of the ISO Standards

    NASA Astrophysics Data System (ADS)

    Tsohou, Aggeliki; Kokolakis, Spyros; Lambrinoudakis, Costas; Gritzalis, Stefanos

    The need for common understanding and agreement of functional and non-functional requirements is well known and understood by information system designers. This is necessary for both: designing the "correct" system and achieving interoperability with other systems. Security is maybe the best example of this need. If the understanding of the security requirements is not the same for all involved parties and the security mechanisms that will be implemented do not comply with some globally accepted rules and practices, then the system that will be designed will not necessarily achieve the desired security level and it will be very difficult to securely interoperate with other systems. It is therefore clear that the role and contribution of international standards to the design and implementation of security mechanisms is dominant. In this paper we provide a state of the art review on information security management standards published by the International Organization for Standardization and the International Electrotechnical Commission. Such an analysis is meaningful to security practitioners for an efficient management of information security. Moreover, the classification of the standards in the clauses of ISO/IEC 27001:2005 that results from our analysis is expected to provide assistance in dealing with the plethora of security standards.

  9. 49 CFR 195.565 - How do I install cathodic protection on breakout tanks?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...

  10. 49 CFR 195.565 - How do I install cathodic protection on breakout tanks?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...

  11. 49 CFR 195.565 - How do I install cathodic protection on breakout tanks?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...

  12. 49 CFR 195.565 - How do I install cathodic protection on breakout tanks?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...

  13. 49 CFR 195.565 - How do I install cathodic protection on breakout tanks?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) capacity built to API Specification 12F, API Standard 620, or API Standard 650 (or its predecessor Standard 12C), you must install the system in accordance with API Recommended Practice 651. However, installation of the system need not comply with API Recommended Practice 651 on any tank for which you note in...

  14. DOT's CAFE rulemaking analysis.

    DOT National Transportation Integrated Search

    2013-02-13

    Presentation discusses what DOT needs to consider in setting CAFE standards. How DOT's use of the CAFE Compliance and Effects Modeling System helps to analyze potential CAFE Standards. How DOT might approach the next round of CAFE standards for model...

  15. Court Interpreters and Translators: Developing Ethical and Professional Standards.

    ERIC Educational Resources Information Center

    Funston, Richard

    Changing needs in the courtroom have raised questions about the need for standards in court interpreter qualifications. In California, no formal training or familiarity with the legal system is required for certification, which is done entirely by language testing. The fact that often court interpreters are officers of the court may be…

  16. Solar industrial process heat systems: An assessment of standards for materials and components

    NASA Astrophysics Data System (ADS)

    Rossiter, W. J.; Shipp, W. E.

    1981-09-01

    A study was conducted to obtain information on the performance of materials and components in operational solar industrial process heat (PH) systems, and to provide recommendations for the development of standards including evaluative test procedures for materials and components. An assessment of the needs for standards for evaluating the long-term performance of materials and components of IPH systems was made. The assessment was based on the availability of existing standards, and information obtained from a field survey of operational systems, the literature, and discussions with individuals in the industry. Field inspections of 10 operational IPH systems were performed.

  17. Open Systems Interconnection.

    ERIC Educational Resources Information Center

    Denenberg, Ray

    1985-01-01

    Discusses the need for standards allowing computer-to-computer communication and gives examples of technical issues. The seven-layer framework of the Open Systems Interconnection (OSI) Reference Model is explained and illustrated. Sidebars feature public data networks and Recommendation X.25, OSI standards, OSI layer functions, and a glossary.…

  18. OpenMI: the essential concepts and their implications for legacy software

    NASA Astrophysics Data System (ADS)

    Gregersen, J. B.; Gijsbers, P. J. A.; Westen, S. J. P.; Blind, M.

    2005-08-01

    Information & Communication Technology (ICT) tools such as computational models are very helpful in designing river basin management plans (rbmp-s). However, in the scientific world there is consensus that a single integrated modelling system to support e.g. the implementation of the Water Framework Directive cannot be developed and that integrated systems need to be very much tailored to the local situation. As a consequence there is an urgent need to increase the flexibility of modelling systems, such that dedicated model systems can be developed from available building blocks. The HarmonIT project aims at precisely that. Its objective is to develop and implement a standard interface for modelling components and other relevant tools: The Open Modelling Interface (OpenMI) standard. The OpenMI standard has been completed and documented. It relies entirely on the "pull" principle, where data are pulled by one model from the previous model in the chain. This paper gives an overview of the OpenMI standard, explains the foremost concepts and the rational behind it.

  19. Status of WSTF Pyrovalve Handbook Development in Year 2000

    NASA Technical Reports Server (NTRS)

    Howard, Julien L.; Hart, Matthew; Smith, William; Saulsberry Regor L.; Fries, Joseph (Technical Monitor)

    1999-01-01

    Significant data have been generated through various spacecraft propulsion system projects involving the use of pyrotechnically operated valves (pyrovalves). These data need to be analyzed, interpreted, summarized, associated, and formatted so they can be made available for spacecraft propulsion system design involving pyrovalves and used to specify test procedures in the performance evaluation and qualification of these systems. To meet this need, a Pyrovalve Handbook is being developed at the NASA White Sands Test Facility. Standards of performance for pyrovalve applications are being formulated under the sponsorship of the NASA Technical Standards Program, as are pyrovalve testing standards under the sponsorship of the NASA Safety and Risk Management Program. The ultimate goal is to have the Handbook adopted as a voluntary standard under the guidance of the AIAA Energetic Components and Systems Technical Committee and, in a more restrictive format, become an integral part of ISO standards for Explosive Systems and Devices Used on Space Vehicles. Feedback from both Government and industry is encouraged and will be the focus of the presentation. It is especially critical that feedback be received on content and formatting of the Handbook to maximize benefit to the technical community. Submission of validated data from organizations outside of NASA is also encouraged.

  20. Quantitative magnetic resonance imaging phantoms: A review and the need for a system phantom.

    PubMed

    Keenan, Kathryn E; Ainslie, Maureen; Barker, Alex J; Boss, Michael A; Cecil, Kim M; Charles, Cecil; Chenevert, Thomas L; Clarke, Larry; Evelhoch, Jeffrey L; Finn, Paul; Gembris, Daniel; Gunter, Jeffrey L; Hill, Derek L G; Jack, Clifford R; Jackson, Edward F; Liu, Guoying; Russek, Stephen E; Sharma, Samir D; Steckner, Michael; Stupic, Karl F; Trzasko, Joshua D; Yuan, Chun; Zheng, Jie

    2018-01-01

    The MRI community is using quantitative mapping techniques to complement qualitative imaging. For quantitative imaging to reach its full potential, it is necessary to analyze measurements across systems and longitudinally. Clinical use of quantitative imaging can be facilitated through adoption and use of a standard system phantom, a calibration/standard reference object, to assess the performance of an MRI machine. The International Society of Magnetic Resonance in Medicine AdHoc Committee on Standards for Quantitative Magnetic Resonance was established in February 2007 to facilitate the expansion of MRI as a mainstream modality for multi-institutional measurements, including, among other things, multicenter trials. The goal of the Standards for Quantitative Magnetic Resonance committee was to provide a framework to ensure that quantitative measures derived from MR data are comparable over time, between subjects, between sites, and between vendors. This paper, written by members of the Standards for Quantitative Magnetic Resonance committee, reviews standardization attempts and then details the need, requirements, and implementation plan for a standard system phantom for quantitative MRI. In addition, application-specific phantoms and implementation of quantitative MRI are reviewed. Magn Reson Med 79:48-61, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

  1. EU-US standards harmonization task group report : summary of lessons learned.

    DOT National Transportation Integrated Search

    1981-05-01

    THIS STUDY ANALYZED THE NEED FOR AND THE FEASIBILITY OF INSTALLING AN IN-VEHICLE ROUTE GUIDANCE SYSTEM. THE STUDY CONCLUDED THAT A SYSTEM OF APPROPRIATE DESIGN WOULD SATISFY A SIGNIFICANT PORTION OF THE NEED FOR ROUTE GUIDANCE WITH AN APPROPRIATE ...

  2. Generation of silver standard concept annotations from biomedical texts with special relevance to phenotypes.

    PubMed

    Oellrich, Anika; Collier, Nigel; Smedley, Damian; Groza, Tudor

    2015-01-01

    Electronic health records and scientific articles possess differing linguistic characteristics that may impact the performance of natural language processing tools developed for one or the other. In this paper, we investigate the performance of four extant concept recognition tools: the clinical Text Analysis and Knowledge Extraction System (cTAKES), the National Center for Biomedical Ontology (NCBO) Annotator, the Biomedical Concept Annotation System (BeCAS) and MetaMap. Each of the four concept recognition systems is applied to four different corpora: the i2b2 corpus of clinical documents, a PubMed corpus of Medline abstracts, a clinical trails corpus and the ShARe/CLEF corpus. In addition, we assess the individual system performances with respect to one gold standard annotation set, available for the ShARe/CLEF corpus. Furthermore, we built a silver standard annotation set from the individual systems' output and assess the quality as well as the contribution of individual systems to the quality of the silver standard. Our results demonstrate that mainly the NCBO annotator and cTAKES contribute to the silver standard corpora (F1-measures in the range of 21% to 74%) and their quality (best F1-measure of 33%), independent from the type of text investigated. While BeCAS and MetaMap can contribute to the precision of silver standard annotations (precision of up to 42%), the F1-measure drops when combined with NCBO Annotator and cTAKES due to a low recall. In conclusion, the performances of individual systems need to be improved independently from the text types, and the leveraging strategies to best take advantage of individual systems' annotations need to be revised. The textual content of the PubMed corpus, accession numbers for the clinical trials corpus, and assigned annotations of the four concept recognition systems as well as the generated silver standard annotation sets are available from http://purl.org/phenotype/resources. The textual content of the ShARe/CLEF (https://sites.google.com/site/shareclefehealth/data) and i2b2 (https://i2b2.org/NLP/DataSets/) corpora needs to be requested with the individual corpus providers.

  3. Fire Behavior System for the Full Range of Fire Management Needs

    Treesearch

    Richard C. Rothermel; Patricia L. Andrews

    1987-01-01

    An "integrated fire behavior/fire danger rating system" should be "seamless" to avoid requiring choices among alternate, independent systems. Descriptions of fuel moisture, fuels, and fire behavior should be standardized, permitting information to flow easily through the spectrum of fire management needs. The level of resolution depends on the...

  4. Applying Registry Services to Spaceflight Technologies to Aid in the Assignment of Assigned Numbers to Disparate Systems and Their Technologies to Further Enable Interoperability

    NASA Technical Reports Server (NTRS)

    Bradford, Robert N.; Nichols, Kelvin F.

    2006-01-01

    To date very little effort has been made to provide interoperability between various space agency projects. To effectively get to the Moon and beyond systems must interoperate. To provide interoperability, standardization and registries of various technologies will be required. These registries will be created as they relate to space flight. With the new NASA Moon/Mars initiative a requirement to standardize and control the naming conventions of very disparate systems and technologies are emerging. The need to provide numbering to the many processes, schemas, vehicles, robots, space suits and technologies (e.g. versions), to name a few, in the highly complex Constellation Initiative is imperative. The number of corporations, developer personnel, system interfaces, people interfaces will require standardization and registries on a scale not currently envisioned. It would only take one exception (stove piped system development) to weaken, if not, destroy interoperability. To start, a standardized registry process must be defined that allows many differing engineers, organizations and operators the ability to easily access disparate registry information across numerous technological and scientific disciplines. Once registries are standardized the need to provide registry support in terms of setup and operations, resolution of conflicts between registries and other issues will need to be addressed. Registries should not be confused with repositories. No end user data is "stored" in a registry nor is it a configuration control system. Once a registry standard is created and approved, the technologies that should be registered must be identified and prioritized. In this paper, we will identify and define a registry process that is compatible with the Constellation Initiative and other non related space activities and organizations. We will then identify and define the various technologies that should use a registry to provide interoperability. The first set of technologies will be those that are currently in need of expansion namely the assignment of satellite designations and the process which controls assignments. Second, we will analyze the technologies currently standardized under the Consultative Committee for Space Data Systems (CCSDS) banner. Third, we will analyze the current CCSDS working group and birds of a feather activities to ascertain registry requirements. Lastly, we will identify technologies that are either currently under the auspices of another

  5. Students with Disabilities & Educational Standards: Recommendations for Policy & Practice.

    ERIC Educational Resources Information Center

    Ysseldyke, James E.; And Others

    1994-01-01

    By setting academic standards, America takes its first critical step toward providing a plan that will create an excellent educational system for the 21st century. It is important for those working on standards and those educating students with disabilities to work together as standards are being developed. Four kinds of standards need to be…

  6. A Statewide Case Management, Surveillance, and Outcome Evaluation System for Children with Special Health Care Needs

    PubMed Central

    Monsen, Karen A.; Elsbernd, Scott A.; Barnhart, Linda; Stock, Jacquie; Prock, Carla E.; Looman, Wendy S.; Nardella, Maria

    2013-01-01

    Objectives. To evaluate the feasibility of implementing a statewide children with special health care needs (CSHCN) program evaluation, case management, and surveillance system using a standardized instrument and protocol that operationalized the United States Health and Human Services CSHCN National Performance Measures. Methods. Public health nurses in local public health agencies in Washington State jointly developed and implemented the standardized system. The instrument was the Omaha System. Descriptive statistics were used for the analysis of standardized data. Results. From the sample of CSHCN visit reports (n = 127), 314 problems and 853 interventions were documented. The most common problem identified was growth and development followed by health care supervision, communication with community resources, caretaking/parenting, income, neglect, and abuse. The most common intervention category was surveillance (60%), followed by case management (24%) and teaching, guidance, and counseling (16%). On average, there were 2.7 interventions per problem and 6.7 interventions per visit. Conclusions. This study demonstrates the feasibility of an approach for statewide CSHCN program evaluation, case management, and surveillance system. Knowledge, behavior, and status ratings suggest that there are critical unmet needs in the Washington State CSHCN population for six major problems. PMID:23533804

  7. Applying Registry Services to Spaceflight Technologies to Aid in the Assignment of Assigned Numbers to Disparate Systems and their Technologies to Further Enable Interoperability

    NASA Technical Reports Server (NTRS)

    Bradford, Robert N.; Nichols, Kelvin F.; Witherspoon, Keith R.

    2006-01-01

    To date very little effort has been made to provide interoperability between various space agency projects. To effectively get to the Moon and beyond systems must interoperate. To provide interoperability, standardization and registries of various technologies will be required. These registries will be created as they relate to space flight. With the new NASA Moon/Mars initiative, a requirement to standardize and control the naming conventions of very disparate systems and technologies is emerging. The need to provide numbering to the many processes, schemas, vehicles, robots, space suits and technologies (e.g. versions), to name a few, in the highly complex Constellation initiative is imperative. The number of corporations, developer personnel, system interfaces, people interfaces will require standardization and registries on a scale not currently envisioned. It would only take one exception (stove piped system development) to weaken, if not, destroy interoperability. To start, a standardized registry process must be defined that allows many differing engineers, organizations and operators the ability to easily access disparate registry information across numerous technological and scientific disciplines. Once registries are standardized the need to provide registry support in terms of setup and operations, resolution of conflicts between registries and other issues will need to be addressed. Registries should not be confused with repositories. No end user data is "stored" in a registry nor is it a configuration control system. Once a registry standard is created and approved, the technologies that should be registered must be identified and prioritized. In this paper, we will identify and define a registry process that is compatible with the Constellation initiative and other non related space activities and organizations. We will then identify and define the various technologies that should use a registry to provide interoperability. The first set of technologies will be those that are currently in need of expansion namely the assignment of satellite designations and the process which controls assignments. Second, we will analyze the technologies currently standardized under the Consultative Committee for Space Data Systems (CCSDS) banner. Third, we will analyze the current CCSDS working group and Birds of a Feather (BoF) activities to ascertain registry requirements. Lastly, we will identify technologies that are either currently under the auspices of another standards body or technologies that are currently not standardized. For activities one through three, we will provide the analysis by either discipline or technology with rationale, identification and brief description of requirements and precedence. For activity four, we will provide a list of current standards bodies e.g. IETF and a list of potential candidates.

  8. Biological standards for the Knowledge-Based BioEconomy: What is at stake.

    PubMed

    de Lorenzo, Víctor; Schmidt, Markus

    2018-01-25

    The contribution of life sciences to the Knowledge-Based Bioeconomy (KBBE) asks for the transition of contemporary, gene-based biotechnology from being a trial-and-error endeavour to becoming an authentic branch of engineering. One requisite to this end is the need for standards to measure and represent accurately biological functions, along with languages for data description and exchange. However, the inherent complexity of biological systems and the lack of quantitative tradition in the field have largely curbed this enterprise. Fortunately, the onset of systems and synthetic biology has emphasized the need for standards not only to manage omics data, but also to increase reproducibility and provide the means of engineering living systems in earnest. Some domains of biotechnology can be easily standardized (e.g. physical composition of DNA sequences, tools for genome editing, languages to encode workflows), while others might be standardized with some dedicated research (e.g. biological metrology, operative systems for bio-programming cells) and finally others will require a considerable effort, e.g. defining the rules that allow functional composition of biological activities. Despite difficulties, these are worthy attempts, as the history of technology shows that those who set/adopt standards gain a competitive advantage over those who do not. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Toward a Naval Aviation Training Quality Feedback System

    ERIC Educational Resources Information Center

    Phillips, Henry L., IV; Foster, T. Chris

    2008-01-01

    Naval aviation needs a unified standard for job-task analyses and data collection. Such a standard would facilitate consolidation of data across aviation platforms and permit evaluation of training content across phases of the training continuum. It would also make possible the construction of a training transfer evaluation system. The Navy cannot…

  10. National Science Education Standards.

    ERIC Educational Resources Information Center

    National Academy of Sciences - National Research Council, Washington, DC.

    The National Science Education Standards present a vision of a scientifically literate populace. The standards outline what students need to know, understand, and be able to do to be scientifically literate at different grade levels. They describe an educational system in which all students demonstrate high levels of performance, teachers are…

  11. [The standardization of medical care and the training of medical personnel].

    PubMed

    Korbut, V B; Tyts, V V; Boĭshenko, V A

    1997-09-01

    The medical specialist training at all levels (medical orderly, doctor's assistant, general practitioner, doctors) should be based on the medical care standards. Preliminary studies in the field of military medicine standards have demonstrated that the medical service of the Armed Forces of Russia needs medical resources' standards, structure and organization standards, technology standards. Military medical service resources' standards should reflect the requisitions for: all medical specialists' qualification, equipment and material for medical set-ups, field medical systems, drugs, etc. Standards for structures and organization should include requisitions for: command and control systems in military formations' and task forces' medical services and their information support; health-care and evacuation functions, sanitary control and anti-epidemic measures and personnel health protection. Technology standards development could improve and regulate the health care procedures in the process of evacuation. Standards' development will help to solve the problem of the data-base for the military medicine education system and medical research.

  12. Quality management in European screening laboratories in blood establishments: A view of current approaches and trends.

    PubMed

    Pereira, Paulo; Westgard, James O; Encarnação, Pedro; Seghatchian, Jerard; de Sousa, Gracinda

    2015-04-01

    The screening laboratory has a critical role in the post-transfusion safety. The success of its targets and efficiency depends on the management system used. Even though the European Union directive 2002/98/EC requires a quality management system in blood establishments, its requirements for screening laboratories are generic. Complementary approaches are needed to implement a quality management system focused on screening laboratories. This article briefly discusses the current good manufacturing practices and good laboratory practices, as well as the trends in quality management system standards. ISO 9001 is widely accepted in some European Union blood establishments as the quality management standard, however this is not synonymous of its successful application. The ISO "risk-based thinking" is interrelated with the quality risk-management process of the EuBIS "Standards and criteria for the inspection of blood establishments". ISO 15189 should be the next step on the quality assurance of a screening laboratory, since it is focused on medical laboratory. To standardize the quality management systems in blood establishments' screening laboratories, new national and European claims focused on technical requirements following ISO 15189 is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Solar Electric Propulsion

    NASA Technical Reports Server (NTRS)

    LaPointe, Michael

    2006-01-01

    The Solar Electric Propulsion (SEP) technology area is tasked to develop near and mid-term SEP technology to improve or enable science mission capture while minimizing risk and cost to the end user. The solar electric propulsion investments are primarily driven by SMD cost-capped mission needs. The technology needs are determined partially through systems analysis tasks including the recent "Re-focus Studies" and "Standard Architecture Study." These systems analysis tasks transitioned the technology development to address the near term propulsion needs suitable for cost-capped open solicited missions such as Discovery and New Frontiers Class missions. Major SEP activities include NASA's Evolutionary Xenon Thruster (NEXT), implementing a Standard Architecture for NSTAR and NEXT EP systems, and developing a long life High Voltage Hall Accelerator (HiVHAC). Lower level investments include advanced feed system development and xenon recovery testing. Future plans include completion of ongoing ISP development activities and evaluating potential use of commercial electric propulsion systems for SMD applications. Examples of enhanced mission capability and technology readiness dates shall be discussed.

  14. Relevance of methods and standards for the assessment of measurement system performance in a High-Value Manufacturing Industry

    NASA Astrophysics Data System (ADS)

    Loftus, Pete; Giudice, Seb

    2014-08-01

    Measurements underpin the engineering decisions that allow products to be designed, manufactured, operated, and maintained. Therefore, the quality of measured data needs to be systematically assured to allow decision makers to proceed with confidence. The use of standards is one way of achieving this. This paper explores the relevance of international documentary standards to the assessment of measurement system capability in High Value Manufacturing (HVM) Industry. An internal measurement standard is presented which supplements these standards and recommendations are made for a cohesive effort to develop the international standards to provide consistency in such industrial applications.

  15. Lessons Learned from Developing and Implementing the Qatar Student Assessment System. Research Brief

    ERIC Educational Resources Information Center

    Gonzalez, Gabriella; Le, Vi-Nhuan; Broer, Markus; Mariano, Louis T.; Froemel, J. Enrique; Goldman, Charles A.; DaVanzo, Julie

    2009-01-01

    Analysis of Qatar's standards-based student assessment system, the first in the region, offers several lessons for other nations instituting similar reforms. These include the need to coordinate on standards and assessment development, allow sufficient time for a fully aligned assessment, and communicate about the purposes and uses of testing.…

  16. Standard software for automated testing of infrared imagers, IRWindows, in practical applications

    NASA Astrophysics Data System (ADS)

    Irwin, Alan; Nicklin, Robert L.

    1998-08-01

    In the past, ad-hoc and manual testing of infrared images hasn't been a deterrent to the characterization of these systems due to the low volume of production and high ratio of skilled personnel to the quantity of units under test. However, with higher volume production, increasing numbers of development labs in emerging markets, and the push towards less expensive, faster development cycles, there is a strong need for standardized testing that is quickly configurable by test engineers, which can be run by less experienced test technicians, and which produce repeatable, accurate results. The IRWindowsTM system addresses these needs using a standard computing platform and existing automated IR test equipment. This paper looks at the general capabilities of the IRWindowsTM system, and then examines the specific results from its application in the PalmIR and Automotive IR production environments.

  17. Integration of the Common Core State Standards into CTE: Challenges and Strategies of Career and Technical Teachers

    ERIC Educational Resources Information Center

    Asunda, Paul A.; Finnell, Alicia M.; Berry, Nicholas R.

    2015-01-01

    In recent years, conversations about the importance of education standards in our school systems have intensified. Common Core State Standards (CCSS) are being implemented across most of the country. The standards require a major shift in instruction and the needed supports really are not there. This study investigated the common barriers,…

  18. Adult Basic Educators' Descriptions of Standards Implementation and Its Influence on Cognitive Rigor

    ERIC Educational Resources Information Center

    Olson, Lia Conklin

    2017-01-01

    With only four years of mandated state-standards in adult basic education (ABE), very little is known about the influence of state-standards implementation on the unique learning needs of its adult students. Two decades of research on standards-based education in the U.S. K12 system has yielded widely debated results regarding the impact of…

  19. ISO 9000 Quality Management System

    NASA Astrophysics Data System (ADS)

    Hadjicostas, Evsevios

    The ISO 9000 series describes a quality management system applicable to any organization. In this chapter we present the requirements of the standard in a way that is as close as possible to the needs of analytical laboratories. The sequence of the requirements follows that in the ISO 9001:2008 standard. In addition, the guidelines for performance improvement set out in the ISO 9004 are reviewed. Both standards should be used as a reference as well as the basis for further elaboration.

  20. Enhancing security and improving interoperability in healthcare information systems.

    PubMed

    Gritzalis, D A

    1998-01-01

    Security is a key issue in healthcare information systems, since most aspects of security become of considerable or even critical importance when handling healthcare information. In addition, the intense need for information exchange has revealed interoperability of systems and applications as another key issue. Standardization can play an important role towards both these issues. In this paper, relevant standardization activities are briefly presented, and existing and emerging healthcare information security standards are identified and critically analysed. The analysis is based on a framework which has been developed for this reason. Therefore, the identification of gaps and inconsistencies in current standardization, the description of the conflicts of standards with legislation, and the analysis of implications of these standards to user organizations, are the main results of this paper.

  1. International short-term medical missions: a systematic review of recommended practices.

    PubMed

    Roche, Stephanie D; Ketheeswaran, Pavinarmatha; Wirtz, Veronika J

    2017-01-01

    To identify practices for conducting international short-term medical missions (STMMs) recommended in the literature and examine how these link STMMs to recipient countries' existing health systems. Systematic review of PubMed-indexed articles on STMMs and their bibliographies using preferred reporting items for systematic reviews and meta-analyses guidelines. Recommendations were organized using the World Health Organization Health Systems Framework. In 92 publications, 67 % offered at least one recommendation that would link STMMs to the recipient country's health system. Among these recommendations, most focused on service delivery and few on health financing and governance. There is a lack of consensus around a proper standard of care, patient selection, and trip duration. Comprehensive global standards are needed for STMM work to ensure that services are beneficial both to patients and to the broader healthcare systems of recipient countries. By providing an overview of the current recommendations and important gaps where practice recommendations are needed, this study can provide relevant input into the development of global standards for STMMs.

  2. Testing stellar evolution models with detached eclipsing binaries

    NASA Astrophysics Data System (ADS)

    Higl, J.; Weiss, A.

    2017-12-01

    Stellar evolution codes, as all other numerical tools, need to be verified. One of the standard stellar objects that allow stringent tests of stellar evolution theory and models, are detached eclipsing binaries. We have used 19 such objects to test our stellar evolution code, in order to see whether standard methods and assumptions suffice to reproduce the observed global properties. In this paper we concentrate on three effects that contain a specific uncertainty: atomic diffusion as used for standard solar model calculations, overshooting from convective regions, and a simple model for the effect of stellar spots on stellar radius, which is one of the possible solutions for the radius problem of M dwarfs. We find that in general old systems need diffusion to allow for, or at least improve, an acceptable fit, and that systems with convective cores indeed need overshooting. Only one system (AI Phe) requires the absence of it for a successful fit. To match stellar radii for very low-mass stars, the spot model proved to be an effective approach, but depending on model details, requires a high percentage of the surface being covered by spots. We briefly discuss improvements needed to further reduce the freedom in modelling and to allow an even more restrictive test by using these objects.

  3. The Problems of Educational Standards in the United States and Russia.

    ERIC Educational Resources Information Center

    Bespal'ko, V. P.

    1996-01-01

    Compares and contrasts the need for educational standards in the United States and Russia. Argues that both systems burden their students with an excess of peripheral and inconsequential material in order to satisfy outdated pedagogical objectives. Praises American efforts at creating national standards but questions their applicability to Russia.…

  4. Timeliness of notification systems for infectious diseases: A systematic literature review.

    PubMed

    Swaan, Corien; van den Broek, Anouk; Kretzschmar, Mirjam; Richardus, Jan Hendrik

    2018-01-01

    Timely notification of infectious diseases is crucial for prompt response by public health services. Adequate notification systems facilitate timely notification. A systematic literature review was performed to assess outcomes of studies on notification timeliness and to determine which aspects of notification systems are associated with timely notification. Articles reviewing timeliness of notifications published between 2000 and 2017 were searched in Pubmed and Scopus. Using a standardized notification chain, timeliness of reporting system for each article was defined as either sufficient (≥ 80% notifications in time), partly sufficient (≥ 50-80%), or insufficient (< 50%) according to the article's predefined timeframe, a standardized timeframe for all articles, and a disease specific timeframe. Electronic notification systems were compared with conventional methods (postal mail, fax, telephone, email) and mobile phone reporting. 48 articles were identified. In almost one third of the studies with a predefined timeframe (39), timeliness of notification systems was either sufficient or insufficient (11/39, 28% and 12/39, 31% resp.). Applying the standardized timeframe (45 studies) revealed similar outcomes (13/45, 29%, sufficient notification timeframe, vs 15/45, 33%, insufficient). The disease specific timeframe was not met by any study. Systems involving reporting by laboratories most often complied sufficiently with predefined or standardized timeframes. Outcomes were not related to electronic, conventional notification systems or mobile phone reporting. Electronic systems were faster in comparative studies (10/13); this hardly resulted in sufficient timeliness, neither according to predefined nor to standardized timeframes. A minority of notification systems meets either predefined, standardized or disease specific timeframes. Systems including laboratory reporting are associated with timely notification. Electronic systems reduce reporting delay, but implementation needs considerable effort to comply with notification timeframes. During outbreak threats, patient, doctors and laboratory testing delays need to be reduced to achieve timely detection and notification. Public health authorities should incorporate procedures for this in their preparedness plans.

  5. Retrospective review of the performance standard for diagnostic x-ray equipment; availability of report--FDA. Notice; final rule-related.

    PubMed

    1985-11-12

    The Food and Drug Administration (FDA) is announcing the availability of a report prepared by the X-Ray Standard Review Group (XSRG) in FDA's Center for Devices and Radiological Health (CDRH). The report contains the review group's assessment of the performance standard for diagnostic x-ray systems and their major components. It contains recommendations for changes in the standard with respect to the need to ensure that regulatory controls keep pace with developing technology and the needs of the radiological community. In addition, FDA is inviting interested persons to submit written comments, data, or information regarding the report for the agency's consideration in deciding whether to initiate any changes in the performance standard.

  6. Inexpensive camera systems for detecting martens, fishers, and other animals: guidelines for use and standardization.

    Treesearch

    Lawrence L.C. Jones; Martin G. Raphael

    1993-01-01

    Inexpensive camera systems have been successfully used to detect the occurrence of martens, fishers, and other wildlife species. The use of cameras is becoming widespread, and we give suggestions for standardizing techniques so that comparisons of data can occur across the geographic range of the target species. Details are given on equipment needs, setting up the...

  7. Strength in Numbers: State Spending on K-12 Assessment Systems

    ERIC Educational Resources Information Center

    Chingos, Matthew M.

    2012-01-01

    In the coming years, states will need to make the most significant changes to their assessment systems in a decade as they implement the Common Core State Standards, a common framework for what students are expected to know that will replace existing standards in 45 states and the District of Columbia. The Common Core effort has prompted concerns…

  8. Making the connection: the VA-Regenstrief project.

    PubMed

    Martin, D K

    1992-01-01

    The Regenstrief Automated Medical Record System is a well-established clinical information system with powerful facilities for querying and decision support. My colleagues and I introduced this system into the Indianapolis Veterans Affairs (VA) Medical Center by interfacing it to the institution's automated data-processing system, the Decentralized Hospital Computer Program (DHCP), using a recently standardized method for clinical data interchange. This article discusses some of the challenges encountered in that process, including the translation of vocabulary terms and maintenance of the software interface. Efforts such as these demonstrate the importance of standardization in medical informatics and the need for data standards at all levels of information exchange.

  9. Cryogenic Insulation Standard Data and Methodologies Project

    NASA Technical Reports Server (NTRS)

    Summerfield, Burton; Thompson, Karen; Zeitlin, Nancy; Mullenix, Pamela; Fesmire, James; Swanger, Adam

    2015-01-01

    Extending some recent developments in the area of technical consensus standards for cryogenic thermal insulation systems, a preliminary Inter-Laboratory Study of foam insulation materials was performed by NASA Kennedy Space Center and LeTourneau University. The initial focus was ambient pressure cryogenic boil off testing using the Cryostat-400 flat-plate instrument. Completion of a test facility at LETU has enabled direct, comparative testing, using identical cryostat instruments and methods, and the production of standard thermal data sets for a number of materials under sub-ambient conditions. The two sets of measurements were analyzed and indicate there is reasonable agreement between the two laboratories. Based on cryogenic boiloff calorimetry, new equipment and methods for testing thermal insulation systems have been successfully developed. These boiloff instruments (or cryostats) include both flat plate and cylindrical models and are applicable to a wide range of different materials under a wide range of test conditions. Test measurements are generally made at large temperature difference (boundary temperatures of 293 K and 78 K are typical) and include the full vacuum pressure range. Results are generally reported in effective thermal conductivity (ke) and mean heat flux (q) through the insulation system. The new cryostat instruments provide an effective and reliable way to characterize the thermal performance of materials under subambient conditions. Proven in through thousands of tests of hundreds of material systems, they have supported a wide range of aerospace, industry, and research projects. Boiloff testing technology is not just for cryogenic testing but is a cost effective, field-representative methodology to test any material or system for applications at sub-ambient temperatures. This technology, when adequately coupled with a technical standards basis, can provide a cost-effective, field-representative methodology to test any material or system for applications at sub-ambient to cryogenic temperatures. A growing need for energy efficiency and cryogenic applications is creating a worldwide demand for improved thermal insulation systems for low temperatures. The need for thermal characterization of these systems and materials raises a corresponding need for insulation test standards and thermal data targeted for cryogenic-vacuum applications. Such standards have a strong correlation to energy, transportation, and environment and the advancement of new materials technologies in these areas. In conjunction with this project, two new standards on cryogenic insulation were recently published by ASTM International: C1774 and C740. Following the requirements of NPR 7120.10, Technical Standards for NASA Programs and Projects, the appropriate information in this report can be provided to the NASA Chief Engineer as input for NASA's annual report to NIST, as required by OMB Circular No. A-119, describing NASA's use of voluntary consensus standards and participation in the development of voluntary consensus standards and bodies.

  10. Considerations for a Standardized Test for Potential-Induced Degradation of Crystalline Silicon PV Modules (Presentation)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hacke, P.

    2012-03-01

    Over the past decade, there have been observations of module degradation and power loss because of the stress that system voltage bias exerts. This results in part from qualification tests and standards note adequately evaluating for the durability of modules to the long-term effects of high voltage bias that they experience in fielded arrays. This talk deals with factors for consideration, progress, and information still needed for a standardized test for degradation due to system voltage stress.

  11. Assuring long-term reliability of concentrator PV systems

    NASA Astrophysics Data System (ADS)

    McConnell, R.; Garboushian, V.; Brown, J.; Crawford, C.; Darban, K.; Dutra, D.; Geer, S.; Ghassemian, V.; Gordon, R.; Kinsey, G.; Stone, K.; Turner, G.

    2009-08-01

    Concentrator PV (CPV) systems have attracted significant interest because these systems incorporate the world's highest efficiency solar cells and they are targeting the lowest cost production of solar electricity for the world's utility markets. Because these systems are just entering solar markets, manufacturers and customers need to assure their reliability for many years of operation. There are three general approaches for assuring CPV reliability: 1) field testing and development over many years leading to improved product designs, 2) testing to internationally accepted qualification standards (especially for new products) and 3) extended reliability tests to identify critical weaknesses in a new component or design. Amonix has been a pioneer in all three of these approaches. Amonix has an internal library of field failure data spanning over 15 years that serves as the basis for its seven generations of CPV systems. An Amonix product served as the test CPV module for the development of the world's first qualification standard completed in March 2001. Amonix staff has served on international standards development committees, such as the International Electrotechnical Commission (IEC), in support of developing CPV standards needed in today's rapidly expanding solar markets. Recently Amonix employed extended reliability test procedures to assure reliability of multijunction solar cell operation in its seventh generation high concentration PV system. This paper will discuss how these three approaches have all contributed to assuring reliability of the Amonix systems.

  12. Large Scale eHealth Deployment in Europe: Insights from Concurrent Use of Standards.

    PubMed

    Eichelberg, Marco; Chronaki, Catherine

    2016-01-01

    Large-scale eHealth deployment projects face a major challenge when called to select the right set of standards and tools to achieve sustainable interoperability in an ecosystem including both legacy systems and new systems reflecting technological trends and progress. There is not a single standard that would cover all needs of an eHealth project, and there is a multitude of overlapping and perhaps competing standards that can be employed to define document formats, terminology, communication protocols mirroring alternative technical approaches and schools of thought. eHealth projects need to respond to the important question of how alternative or inconsistently implemented standards and specifications can be used to ensure practical interoperability and long-term sustainability in large scale eHealth deployment. In the eStandards project, 19 European case studies reporting from R&D and large-scale eHealth deployment and policy projects were analyzed. Although this study is not exhaustive, reflecting on the concepts, standards, and tools for concurrent use and the successes, failures, and lessons learned, this paper offers practical insights on how eHealth deployment projects can make the most of the available eHealth standards and tools and how standards and profile developing organizations can serve the users embracing sustainability and technical innovation.

  13. Office of Space Terrestrial Applications (OSTA)/Applications Data Service (ADS) data systems standards

    NASA Technical Reports Server (NTRS)

    Walton, B. A. (Editor)

    1981-01-01

    Standards needed to interconnect applications data service pilots for data sharing were identified. Current pilot methodologies are assessed. Recommendations for future work are made. A preliminary set of requirements for guidelines and standards for catalogues, directories, and dictionaries was identified. The user was considered to be a scientist at a terminal. Existing and emerging national and international telecommunication standards were adopted where possible in view of new and unproven standards.

  14. CLAIM (CLinical Accounting InforMation)--an XML-based data exchange standard for connecting electronic medical record systems to patient accounting systems.

    PubMed

    Guo, Jinqiu; Takada, Akira; Tanaka, Koji; Sato, Junzo; Suzuki, Muneou; Takahashi, Kiwamu; Daimon, Hiroyuki; Suzuki, Toshiaki; Nakashima, Yusei; Araki, Kenji; Yoshihara, Hiroyuki

    2005-08-01

    With the evolving and diverse electronic medical record (EMR) systems, there appears to be an ever greater need to link EMR systems and patient accounting systems with a standardized data exchange format. To this end, the CLinical Accounting InforMation (CLAIM) data exchange standard was developed. CLAIM is subordinate to the Medical Markup Language (MML) standard, which allows the exchange of medical data among different medical institutions. CLAIM uses eXtensible Markup Language (XML) as a meta-language. The current version, 2.1, inherited the basic structure of MML 2.x and contains two modules including information related to registration, appointment, procedure and charging. CLAIM 2.1 was implemented successfully in Japan in 2001. Consequently, it was confirmed that CLAIM could be used as an effective data exchange format between EMR systems and patient accounting systems.

  15. James Webb Space Telescope XML Database: From the Beginning to Today

    NASA Technical Reports Server (NTRS)

    Gal-Edd, Jonathan; Fatig, Curtis C.

    2005-01-01

    The James Webb Space Telescope (JWST) Project has been defining, developing, and exercising the use of a common eXtensible Markup Language (XML) for the command and telemetry (C&T) database structure. JWST is the first large NASA space mission to use XML for databases. The JWST project started developing the concepts for the C&T database in 2002. The database will need to last at least 20 years since it will be used beginning with flight software development, continuing through Observatory integration and test (I&T) and through operations. Also, a database tool kit has been provided to the 18 various flight software development laboratories located in the United States, Europe, and Canada that allows the local users to create their own databases. Recently the JWST Project has been working with the Jet Propulsion Laboratory (JPL) and Object Management Group (OMG) XML Telemetry and Command Exchange (XTCE) personnel to provide all the information needed by JWST and JPL for exchanging database information using a XML standard structure. The lack of standardization requires custom ingest scripts for each ground system segment, increasing the cost of the total system. Providing a non-proprietary standard of the telemetry and command database definition formation will allow dissimilar systems to communicate without the need for expensive mission specific database tools and testing of the systems after the database translation. The various ground system components that would benefit from a standardized database are the telemetry and command systems, archives, simulators, and trending tools. JWST has exchanged the XML database with the Eclipse, EPOCH, ASIST ground systems, Portable spacecraft simulator (PSS), a front-end system, and Integrated Trending and Plotting System (ITPS) successfully. This paper will discuss how JWST decided to use XML, the barriers to a new concept, experiences utilizing the XML structure, exchanging databases with other users, and issues that have been experienced in creating databases for the C&T system.

  16. Security and Privacy in a DACS.

    PubMed

    Delgado, Jaime; Llorente, Silvia; Pàmies, Martí; Vilalta, Josep

    2016-01-01

    The management of electronic health records (EHR), in general, and clinical documents, in particular, is becoming a key issue in the daily work of Healthcare Organizations (HO). The need for providing secure and private access to, and storage for, clinical documents together with the need for HO to interoperate, raises a number of issues difficult to solve. Many systems are in place to manage EHR and documents. Some of these Healthcare Information Systems (HIS) follow standards in their document structure and communications protocols, but many do not. In fact, they are mostly proprietary and do not interoperate. Our proposal to solve the current situation is the use of a DACS (Document Archiving and Communication System) for providing security, privacy and standardized access to clinical documents.

  17. High transport efficiency of nanoparticles through a total-consumption sample introduction system and its beneficial application for particle size evaluation in single-particle ICP-MS.

    PubMed

    Miyashita, Shin-Ichi; Mitsuhashi, Hiroaki; Fujii, Shin-Ichiro; Takatsu, Akiko; Inagaki, Kazumi; Fujimoto, Toshiyuki

    2017-02-01

    In order to facilitate reliable and efficient determination of both the particle number concentration (PNC) and the size of nanoparticles (NPs) by single-particle ICP-MS (spICP-MS) without the need to correct for the particle transport efficiency (TE, a possible source of bias in the results), a total-consumption sample introduction system consisting of a large-bore, high-performance concentric nebulizer and a small-volume on-axis cylinder chamber was utilized. Such a system potentially permits a particle TE of 100 %, meaning that there is no need to include a particle TE correction when calculating the PNC and the NP size. When the particle TE through the sample introduction system was evaluated by comparing the frequency of sharp transient signals from the NPs in a measured NP standard of precisely known PNC to the particle frequency for a measured NP suspension, the TE for platinum NPs with a nominal diameter of 70 nm was found to be very high (i.e., 93 %), and showed satisfactory repeatability (relative standard deviation of 1.0 % for four consecutive measurements). These results indicated that employing this total consumption system allows the particle TE correction to be ignored when calculating the PNC. When the particle size was determined using a solution-standard-based calibration approach without an NP standard, the particle diameters of platinum and silver NPs with nominal diameters of 30-100 nm were found to agree well with the particle diameters determined by transmission electron microscopy, regardless of whether a correction was performed for the particle TE. Thus, applying the proposed system enables NP size to be accurately evaluated using a solution-standard-based calibration approach without the need to correct for the particle TE.

  18. Manufacturing Bms/Iso System Review

    NASA Technical Reports Server (NTRS)

    Gomez, Yazmin

    2004-01-01

    The Quality Management System (QMS) is one that recognizes the need to continuously change and improve an organization s products and services as determined by system feedback, and corresponding management decisions. The purpose of a Quality Management System is to minimize quality variability of an organization's products and services. The optimal Quality Management System balances the need for an organization to maintain flexibility in the products and services it provides with the need for providing the appropriate level of discipline and control over the processes used to provide them. The goal of a Quality Management System is to ensure the quality of the products and services while consistently (through minimizing quality variability) meeting or exceeding customer expectations. The GRC Business Management System (BMS) is the foundation of the Center's ISO 9001:2000 registered quality system. ISO 9001 is a quality system model developed by the International Organization for Standardization. BMS supports and promote the Glenn Research Center Quality Policy and wants to ensure the customer satisfaction while also meeting quality standards. My assignment during this summer is to examine the manufacturing processes used to develop research hardware, which in most cases are one of a kind hardware, made with non conventional equipment and materials. During this process of observation I will make a determination, based on my observations of the hardware development processes the best way to meet customer requirements and at the same time achieve the GRC quality standards. The purpose of my task is to review the manufacturing processes identifying opportunities in which to optimize the efficiency of the processes and establish a plan for implementation and continuous improvement.

  19. Skills Standards, British Style. Linking Assessment and Training in the United Kingdom. NOICC Occasional Paper 6.

    ERIC Educational Resources Information Center

    Newton, Wendy M.

    A major review of vocational education and training has occurred across the United Kingdom since 1986. Employment requirements are being identified in the form of occupational standards that provide the foundation for the new system of vocational qualifications, National Vocational Qualifications (NVQs). Standards describe what people need to be…

  20. Application-driven strategies for efficient transfer of medical images over very high speed networks

    NASA Astrophysics Data System (ADS)

    Alsafadi, Yasser H.; McNeill, Kevin M.; Martinez, Ralph

    1993-09-01

    The American College of Radiology (ACR) and the National Electrical Manufacturing Association (NEMA) in 1982 formed the ACR-NEMA committee to develop a standard to enable equipment from different vendors to communicate and participate in a picture archiving and communications system (PACS). The standard focused mostly on interconnectivity issues and communication needs of PACS. It was patterned after the international standards organization open systems interconnection (ISO/OSI) reference model. Three versions of the standard appeared, evolving from simple point-to-point specification of connection between two medical devices to a complex standard of a network environment. However, fast changes in network software and hardware technologies makes it difficult for the standard to keep pace. This paper compares two versions of the ACR-NEMA standard and then describes a system that is used at the University of Arizona Intensive Care Unit. In this system, the application should specify the interface to network services and grade of service required. These provisions are suggested to make the application independent from evolving network technology and support true open systems.

  1. Multimedia courseware in an open-systems environment: a DoD strategy

    NASA Astrophysics Data System (ADS)

    Welsch, Lawrence A.

    1991-03-01

    The federal government is about to invest billions of dollars to develop multimedia training materials for delivery on computer-based interactive training systems. Acquisition of a variety of computers and peripheral devices hosting various operating systems and suites of authoring system software will be necessary to facilitate the development of this courseware. There is no single source that will satisfy all needs. Although high-performance, low-cost interactive training hardware is available, the products have proprietary software interfaces. Because the interfaces are proprietary, expensive reprogramming is usually required to adapt such software products to other platforms. This costly reprogramming could be eliminated by adopting standard software interfaces. DoD's Portable Courseware Project (PORTCO) is typical of projects worldwide that require standard software interfaces. This paper articulates the strategy whereby PORTCO leverages the open systems movement and the new realities of information technology. These realities encompass changes in the pace at which new technology becomes available, changes in organizational goals and philosophy, new roles of vendors and users, changes in the procurement process, and acceleration toward open system environments. The PORTCO strategy is applicable to all projects and systems that require open systems to achieve mission objectives. The federal goal is to facilitate the creation of an environment in which high quality portable courseware is available as commercial off-the-shelf products and is competitively supplied by a variety of vendors. In order to achieve this goal a system architecture incorporating standards to meet the users' needs must be established. The Request for Architecture (RFA) developed cooperatively by DoD and the National Institute of Standards and Technology (NIST) will generate the PORTCO systems architecture. This architecture must freely integrate the courseware and authoring software from the lower levels of machine architecture and systems service implementation. In addition, the systems architecture will establish how the application-specific technologies relate to other technologies. Further, a computer-based interactive training applications profile must be developed. This profile, along with the systems architecture derived as a result of the RFA, provides the basis for identifying the needed standards. NIST will then accelerate the development of these standards using, but not restricted to, existing standards activities within established standards forums. The federal multimedia courseware effort has adopted the Interactive Multimedia Association (INA) Recommended Practices for Interactive Video Portability as the baseline for the migration of computer-based interactive training systems to an open systems environment based upon international standards. The PORTCO strategy includes an evolutionary migration to a standards-based, Open System Environments (OSE). An important aspect of this migration strategy is to move to open systems via stepwise evolution rather than via quantum leaps. Another area of concern is that of infrastructure issues, such as maintaining and supporting the technologies required for computer-based interactive training. The federal multimedia initiative will use the RFA-based architecture to differentiate between those technologies that can be maintained and supported by existing infrastructure mechanisms and those that require new mechanisms. Existing infrastructure mechanisms will be used and where infrastructure mechanisms do not exist, the approach will be to place high priority on establishing the appropriate mechanisms. Establishing an infrastructure mechanism is a nontrivial task requiring sustained investment of resources.

  2. Investigating and Learning Lessons from Early Experiences of Implementing ePrescribing Systems into NHS Hospitals: A Questionnaire Study

    PubMed Central

    Cresswell, Kathrin; Coleman, Jamie; Slee, Ann; Williams, Robin; Sheikh, Aziz

    2013-01-01

    Background ePrescribing systems have significant potential to improve the safety and efficiency of healthcare, but they need to be carefully selected and implemented to maximise benefits. Implementations in English hospitals are in the early stages and there is a lack of standards guiding the procurement, functional specifications, and expected benefits. We sought to provide an updated overview of the current picture in relation to implementation of ePrescribing systems, explore existing strategies, and identify early lessons learned. Methods A descriptive questionnaire-based study, which included closed and free text questions and involved both quantitative and qualitative analysis of the data generated. Results We obtained responses from 85 of 108 NHS staff (78.7% response rate). At least 6% (n = 10) of the 168 English NHS Trusts have already implemented ePrescribing systems, 2% (n = 4) have no plans of implementing, and 34% (n = 55) are planning to implement with intended rapid implementation timelines driven by high expectations surrounding improved safety and efficiency of care. The majority are unclear as to which system to choose, but integration with existing systems and sophisticated decision support functionality are important decisive factors. Participants highlighted the need for increased guidance in relation to implementation strategy, system choice and standards, as well as the need for top-level management support to adequately resource the project. Although some early benefits were reported by hospitals that had already implemented, the hoped for benefits relating to improved efficiency and cost-savings remain elusive due to a lack of system maturity. Conclusions Whilst few have begun implementation, there is considerable interest in ePrescribing systems with ambitious timelines amongst those hospitals that are planning implementations. In order to ensure maximum chances of realising benefits, there is a need for increased guidance in relation to implementation strategy, system choice and standards, as well as increased financial resources to fund local activities. PMID:23335961

  3. Addressing the needs of people with disability in Nepal: The urgent need.

    PubMed

    Paudel, Yuba Raj; Dariang, Maureen; Keeling, Stephen J; Mehata, Suresh

    2016-04-01

    Health planners and policy makers often overlook the needs of people with disability (PWDs) in less developed countries such as Nepal. The aftermath of conflict and earthquake has further escalated the need of people with disability in Nepal. While the country is preparing for the implementation of a national health sector strategy for the next five years and when the health system is being restructured, we believe that this is the right time to address needs of people with disability by strengthening the health system and operationalizing community based rehabilitation. Furthermore, there is a need of a standard database and monitoring system to regularly assess social inclusion of people with disability. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Maximizing your Process Improvement ROI through Harmonization

    DTIC Science & Technology

    2008-03-01

    ISO 12207 ) provide comprehensive guidance on what system and software engineering processes are needed. The frameworks of Six Sigma provide specific...reductions. Their veloci-Q Enterprise integrated system, includes ISO 9001, CMM, P-CMM, TL9000, British Standard 7799, and Six Sigma. They estimate a 30...at their discretion. And, they chose to blend process maturity models and ISO standards to support their objective regarding the establishment of

  5. The standardized EEG electrode array of the IFCN.

    PubMed

    Seeck, Margitta; Koessler, Laurent; Bast, Thomas; Leijten, Frans; Michel, Christoph; Baumgartner, Christoph; He, Bin; Beniczky, Sándor

    2017-10-01

    Standardized EEG electrode positions are essential for both clinical applications and research. The aim of this guideline is to update and expand the unifying nomenclature and standardized positioning for EEG scalp electrodes. Electrode positions were based on 20% and 10% of standardized measurements from anatomical landmarks on the skull. However, standard recordings do not cover the anterior and basal temporal lobes, which is the most frequent source of epileptogenic activity. Here, we propose a basic array of 25 electrodes including the inferior temporal chain, which should be used for all standard clinical recordings. The nomenclature in the basic array is consistent with the 10-10-system. High-density scalp EEG arrays (64-256 electrodes) allow source imaging with even sub-lobar precision. This supplementary exam should be requested whenever necessary, e.g. search for epileptogenic activity in negative standard EEG or for presurgical evaluation. In the near future, nomenclature for high density electrodes arrays beyond the 10-10 system needs to be defined, to allow comparison and standardized recordings across centers. Contrary to the established belief that smaller heads needs less electrodes, in young children at least as many electrodes as in adults should be applied due to smaller skull thickness and the risk of spatial aliasing. Copyright © 2017 International Federation of Clinical Neurophysiology. Published by Elsevier B.V. All rights reserved.

  6. Review and comparison of quality standards, guidelines and regulations for laboratories.

    PubMed

    Datema, Tjeerd A M; Oskam, Linda; Klatser, Paul R

    2012-01-01

    The variety and number of laboratory quality standards, guidelines and regulations (hereafter: quality documents) makes it difficult to choose the most suitable one for establishing and maintaining a laboratory quality management system. There is a need to compare the characteristics, suitability and applicability of quality documents in view of the increasing efforts to introduce quality management in laboratories, especially in clinical diagnostic laboratories in low income and middle income countries. This may provide valuable insights for policy makers developing national laboratory policies, and for laboratory managers and quality officers in choosing the most appropriate quality document for upgrading their laboratories. We reviewed the history of quality document development and then selected a subset based on their current use. We analysed these documents following a framework for comparison of quality documents that was adapted from the Clinical Laboratory Standards Institute guideline GP26 Quality management system model for clinical laboratory services . Differences were identified between national and international, and non-clinical and clinical quality documents. The most salient findings were the absence of provisions on occurrence management and customer service in almost all non-clinical quality documents, a low number of safety requirements aimed at protecting laboratory personnel in international quality documents and no requirements regarding ethical behaviour in almost all quality documents. Each laboratory needs to investigate whether national regulatory standards are present. These are preferred as they most closely suit the needs of laboratories in the country. A laboratory should always use both a standard and a guideline: a standard sums up the requirements to a quality management system, a guideline describes how quality management can be integrated in the laboratory processes.

  7. The case against one-shot testing for initial dental licensure.

    PubMed

    Chambers, David W; Dugoni, Arthur A; Paisley, Ian

    2004-03-01

    High-stakes testing are expected to meet standards for cost-effectiveness, fairness, transparency, high reliability, and high validity. It is questionable whether initial licensure examinations in dentistry meet such standards. Decades of piecemeal adjustments in the system have resulted in limited improvement. The essential flaw in the system is reliance on a one-shot sample of a small segment of the skills, understanding, and supporting values needed for today's professional practice of dentistry. The "snapshot" approach to testing produces inherently substandard levels of reliability and validity. A three-step alternative is proposed: boards should (1) define the competencies required of beginning practitioners, (2) establish the psychometric standards needed to make defensible judgments about candidates, and (3) base licensure decisions only on portfolios of evidence that test for defined competencies at established levels of quality.

  8. Service Oriented Architecture for Wireless Sensor Networks in Agriculture

    NASA Astrophysics Data System (ADS)

    Sawant, S. A.; Adinarayana, J.; Durbha, S. S.; Tripathy, A. K.; Sudharsan, D.

    2012-08-01

    Rapid advances in Wireless Sensor Network (WSN) for agricultural applications has provided a platform for better decision making for crop planning and management, particularly in precision agriculture aspects. Due to the ever-increasing spread of WSNs there is a need for standards, i.e. a set of specifications and encodings to bring multiple sensor networks on common platform. Distributed sensor systems when brought together can facilitate better decision making in agricultural domain. The Open Geospatial Consortium (OGC) through Sensor Web Enablement (SWE) provides guidelines for semantic and syntactic standardization of sensor networks. In this work two distributed sensing systems (Agrisens and FieldServer) were selected to implement OGC SWE standards through a Service Oriented Architecture (SOA) approach. Online interoperable data processing was developed through SWE components such as Sensor Model Language (SensorML) and Sensor Observation Service (SOS). An integrated web client was developed to visualize the sensor observations and measurements that enables the retrieval of crop water resources availability and requirements in a systematic manner for both the sensing devices. Further, the client has also the ability to operate in an interoperable manner with any other OGC standardized WSN systems. The study of WSN systems has shown that there is need to augment the operations / processing capabilities of SOS in order to understand about collected sensor data and implement the modelling services. Also, the very low cost availability of WSN systems in future, it is possible to implement the OGC standardized SWE framework for agricultural applications with open source software tools.

  9. Development of a New Intelligent Joystick for People with Reduced Mobility.

    PubMed

    Mrabet, Makrem; Rabhi, Yassine; Fnaiech, Farhat

    2018-01-01

    Despite the diversity of electric wheelchairs, many people with physical limitations and seniors have difficulty using their standard joystick. As a result, they cannot meet their needs or ensure safe travel. Recent assistive technologies can help to give them autonomy and independence. This work deals with the real-time implementation of an artificial intelligence device to overcome these problems. Following a review of the literature from previous work, we present the methodology and process for implementing our intelligent control system on an electric wheelchair. The system is based on a neural algorithm that overcomes problems with standard joystick maneuvers such as the inability to move correctly in one direction. However, this implies the need for an appropriate methodology to map the position of the joystick handle. Experiments on a real wheelchair are carried out with real patients of the Mohamed Kassab National Institute Orthopedic, Physical and Functional Rehabilitation Hospital of Tunis. The proposed intelligent system gives good results compared to the use of a standard joystick.

  10. Development of a New Intelligent Joystick for People with Reduced Mobility

    PubMed Central

    Mrabet, Makrem; Fnaiech, Farhat

    2018-01-01

    Despite the diversity of electric wheelchairs, many people with physical limitations and seniors have difficulty using their standard joystick. As a result, they cannot meet their needs or ensure safe travel. Recent assistive technologies can help to give them autonomy and independence. This work deals with the real-time implementation of an artificial intelligence device to overcome these problems. Following a review of the literature from previous work, we present the methodology and process for implementing our intelligent control system on an electric wheelchair. The system is based on a neural algorithm that overcomes problems with standard joystick maneuvers such as the inability to move correctly in one direction. However, this implies the need for an appropriate methodology to map the position of the joystick handle. Experiments on a real wheelchair are carried out with real patients of the Mohamed Kassab National Institute Orthopedic, Physical and Functional Rehabilitation Hospital of Tunis. The proposed intelligent system gives good results compared to the use of a standard joystick. PMID:29765462

  11. Operational and support considerations in standardization

    NASA Astrophysics Data System (ADS)

    Oreilly, W. T.

    Military applications in the era of the 1990's and beyond, require capabilities beyond those available in most existing systems. These capabilities must be provided in a manner that will achieve a low logistic support cost and that can be maintained with relatively inexperienced personnel. This paper presents the design considerations that must be addressed in each of the standardized subsystems and modules that will provide the operational and support needs for tomorrow and beyond. Advanced maintenance concepts, such as two and one level maintenance, are described together with the operational and life cycle cost benefits that will be achieved. A new operation concept called deferred maintenance, which provides sustained operation without maintenance support, is presented. The fault tolerant architecture which will permit a standardized modular design to efficiently accommodate a variety of system applications is presented. The concerns discussed include combat damage survivability, fail safe and fail operational needs, as well as high availability for long life applications as is required for systems employed in the Space Defense Initiative (SDI).

  12. The Vendors' Corner--The Request for Proposal.

    ERIC Educational Resources Information Center

    Sugnet, Chris; And Others

    1987-01-01

    Several online vendors address the issue of RFPs (requests for proposals) for library systems, discussing the documents' style, technical standards, library expectations, liabilities associated with using this procedure, factors in the decision to bid, and the need for a standardized document and national clearinghouse. (CLB)

  13. Usability of HL7 and SNOMED CT standards in Java Persistence API environment.

    PubMed

    Antal, Gábor; Végh, Ádám Zoltán; Bilicki, Vilmos

    2014-01-01

    Due to the need for an efficient way of communication between the different stakeholders of healthcare (e.g. doctors, pharmacists, hospitals, patients etc.), the possibility of integrating different healthcare systems occurs. However, during the integration process several problems of heterogeneity might come up, which can turn integration into a difficult task. These problems motivated the development of healthcare information standards. The main goal of the HL7 family of standards is the standardization of communication between clinical systems and the unification of clinical document formats on the structural level. The SNOMED CT standard aims the unification of the healthcare terminology, thus the development of a standard on lexical level. The goal of this article is to introduce the usability of these two standards in Java Persistence API (JPA) environment, and to examine how standard-based system components can be efficiently generated. First, we shortly introduce the structure of the standards, their advantages and disadvantages. Then, we present an architecture design method, which can help to eliminate the possible structural drawbacks of the standards, and makes code generating tools applicable for the automatic production of certain system components.

  14. Packet utilisation definitions for the ESA XMM mission

    NASA Technical Reports Server (NTRS)

    Nye, H. R.

    1994-01-01

    XMM, ESA's X-Ray Multi-Mirror satellite, due for launch at the end of 1999 will be the first ESA scientific spacecraft to implement the ESA packet telecommand and telemetry standards and will be the first ESOC-controlled science mission to take advantage of the new flight control system infrastructure development (based on object-oriented design and distributed-system architecture) due for deployment in 1995. The implementation of the packet standards is well defined at packet transport level. However, the standard relevant to the application level (the ESA Packet Utilization Standard) covers a wide range of on-board 'services' applicable in varying degrees to the needs of XMM. In defining which parts of the ESA PUS to implement, the XMM project first considered the mission objectives and the derived operations concept and went on to identify a minimum set of packet definitions compatible with these aspects. This paper sets the scene as above and then describes the services needed for XMM and the telecommand and telemetry packet types necessary to support each service.

  15. Archetype-based data warehouse environment to enable the reuse of electronic health record data.

    PubMed

    Marco-Ruiz, Luis; Moner, David; Maldonado, José A; Kolstrup, Nils; Bellika, Johan G

    2015-09-01

    The reuse of data captured during health care delivery is essential to satisfy the demands of clinical research and clinical decision support systems. A main barrier for the reuse is the existence of legacy formats of data and the high granularity of it when stored in an electronic health record (EHR) system. Thus, we need mechanisms to standardize, aggregate, and query data concealed in the EHRs, to allow their reuse whenever they are needed. To create a data warehouse infrastructure using archetype-based technologies, standards and query languages to enable the interoperability needed for data reuse. The work presented makes use of best of breed archetype-based data transformation and storage technologies to create a workflow for the modeling, extraction, transformation and load of EHR proprietary data into standardized data repositories. We converted legacy data and performed patient-centered aggregations via archetype-based transformations. Later, specific purpose aggregations were performed at a query level for particular use cases. Laboratory test results of a population of 230,000 patients belonging to Troms and Finnmark counties in Norway requested between January 2013 and November 2014 have been standardized. Test records normalization has been performed by defining transformation and aggregation functions between the laboratory records and an archetype. These mappings were used to automatically generate open EHR compliant data. These data were loaded into an archetype-based data warehouse. Once loaded, we defined indicators linked to the data in the warehouse to monitor test activity of Salmonella and Pertussis using the archetype query language. Archetype-based standards and technologies can be used to create a data warehouse environment that enables data from EHR systems to be reused in clinical research and decision support systems. With this approach, existing EHR data becomes available in a standardized and interoperable format, thus opening a world of possibilities toward semantic or concept-based reuse, query and communication of clinical data. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  16. Tracking Progress in Improving Diagnosis: A Framework for Defining Undesirable Diagnostic Events.

    PubMed

    Olson, Andrew P J; Graber, Mark L; Singh, Hardeep

    2018-01-29

    Diagnostic error is a prevalent, harmful, and costly phenomenon. Multiple national health care and governmental organizations have recently identified the need to improve diagnostic safety as a high priority. A major barrier, however, is the lack of standardized, reliable methods for measuring diagnostic safety. Given the absence of reliable and valid measures for diagnostic errors, we need methods to help establish some type of baseline diagnostic performance across health systems, as well as to enable researchers and health systems to determine the impact of interventions for improving the diagnostic process. Multiple approaches have been suggested but none widely adopted. We propose a new framework for identifying "undesirable diagnostic events" (UDEs) that health systems, professional organizations, and researchers could further define and develop to enable standardized measurement and reporting related to diagnostic safety. We propose an outline for UDEs that identifies both conditions prone to diagnostic error and the contexts of care in which these errors are likely to occur. Refinement and adoption of this framework across health systems can facilitate standardized measurement and reporting of diagnostic safety.

  17. Building a World-Class Front-Line Workforce: The Need for Occupational Skill Standards in State Workforce Preparation Programs. EQW Working Papers.

    ERIC Educational Resources Information Center

    Sheets, Robert G.

    Establishment of a national-state system of world-class occupational skill standards is a first step in restructuring adult vocational-technical education and job training programs. Occupational skills standards provide the necessary foundation for addressing three major state policy issues: the state's proper role in private work-based training,…

  18. Setting standards for planning off duty and audit of practice.

    PubMed

    Walker, Linda; Minchin, Anne; Pickard, Jane

    The off duty or rostering system is an important part of managing any ward or department. This article looks at the issues that need to be considered when drawing up and managing off duty. It recommends standards for off-duty planning and shares the results of an audit carried out against some of these standards in one NHS trust.

  19. Quality Management Systems in the Clinical Laboratories in Latin America

    PubMed Central

    2015-01-01

    The implementation of management systems in accordance with standards like ISO 9001:2008 (1,2) in the clinical laboratories has conferred and added value of reliability and therefore a very significant input to patient safety. As we know the ISO 9001:2008 (1) a certification standard, and ISO 15189:2012 (2) an accreditation standard, both, at the time have generated institutional memory where they have been implemented, the transformation of culture focused on correct execution, control and following, evidence needed and the importance of register. PMID:27683495

  20. Panel C report: Standards needed for the use of ISO Open Systems Interconnection - basic reference model

    NASA Technical Reports Server (NTRS)

    1981-01-01

    The use of an International Standards Organization (ISO) Open Systems Interconnection (OSI) Reference Model and its relevance to interconnecting an Applications Data Service (ADS) pilot program for data sharing is discussed. A top level mapping between the conjectured ADS requirements and identified layers within the OSI Reference Model was performed. It was concluded that the OSI model represents an orderly architecture for the ADS networking planning and that the protocols being developed by the National Bureau of Standards offer the best available implementation approach.

  1. Quality assurance: Importance of systems and standard operating procedures

    PubMed Central

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company. PMID:21584180

  2. Quality assurance: Importance of systems and standard operating procedures.

    PubMed

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  3. Architecture for Survivable Systems Processing (ASSP). Technology benefits for Open System Interconnects

    NASA Technical Reports Server (NTRS)

    Wood, Richard J.

    1992-01-01

    The Architecture for Survivable Systems Processing (ASSP) program is a two phase program whose objective is the derivation, specification, development and validation of an open system architecture capable of supporting advanced processing needs of space, ground, and launch vehicle operations. The output of the first phase is a set of hardware and software standards and specifications defining this architecture at three levels. The second phase will validate these standards and develop the technology necessary to achieve strategic hardness, packaging density, throughput requirements, and interoperability/interchangeability.

  4. Real-time UNIX in HEP data acquisition

    NASA Astrophysics Data System (ADS)

    Buono, S.; Gaponenko, I.; Jones, R.; Mapelli, L.; Mornacchi, G.; Prigent, D.; Sanchez-Corral, E.; Skiadelli, M.; Toppers, A.; Duval, P. Y.; Ferrato, D.; Le Van Suu, A.; Qian, Z.; Rondot, C.; Ambrosini, G.; Fumagalli, G.; Aguer, M.; Huet, M.

    1994-12-01

    Today's experimentation in high energy physics is characterized by an increasing need for sensitivity to rare phenomena and complex physics signatures, which require the use of huge and sophisticated detectors and consequently a high performance readout and data acquisition. Multi-level triggering, hierarchical data collection and an always increasing amount of processing power, distributed throughout the data acquisition layers, will impose a number of features on the software environment, especially the need for a high level of standardization. Real-time UNIX seems, today, the best solution for the platform independence, operating system interface standards and real-time features necessary for data acquisition in HEP experiments. We present the results of the evaluation, in a realistic application environment, of a Real-Time UNIX operating system: the EP/LX real-time UNIX system.

  5. Mobile Robot and Mobile Manipulator Research Towards ASTM Standards Development.

    PubMed

    Bostelman, Roger; Hong, Tsai; Legowik, Steven

    2016-01-01

    Performance standards for industrial mobile robots and mobile manipulators (robot arms onboard mobile robots) have only recently begun development. Low cost and standardized measurement techniques are needed to characterize system performance, compare different systems, and to determine if recalibration is required. This paper discusses work at the National Institute of Standards and Technology (NIST) and within the ASTM Committee F45 on Driverless Automatic Guided Industrial Vehicles. This includes standards for both terminology, F45.91, and for navigation performance test methods, F45.02. The paper defines terms that are being considered. Additionally, the paper describes navigation test methods that are near ballot and docking test methods being designed for consideration within F45.02. This includes the use of low cost artifacts that can provide alternatives to using relatively expensive measurement systems.

  6. Mobile Robot and Mobile Manipulator Research Towards ASTM Standards Development

    PubMed Central

    Bostelman, Roger; Hong, Tsai; Legowik, Steven

    2017-01-01

    Performance standards for industrial mobile robots and mobile manipulators (robot arms onboard mobile robots) have only recently begun development. Low cost and standardized measurement techniques are needed to characterize system performance, compare different systems, and to determine if recalibration is required. This paper discusses work at the National Institute of Standards and Technology (NIST) and within the ASTM Committee F45 on Driverless Automatic Guided Industrial Vehicles. This includes standards for both terminology, F45.91, and for navigation performance test methods, F45.02. The paper defines terms that are being considered. Additionally, the paper describes navigation test methods that are near ballot and docking test methods being designed for consideration within F45.02. This includes the use of low cost artifacts that can provide alternatives to using relatively expensive measurement systems. PMID:28690359

  7. Technology Transfer and Technology Transfer Intermediaries

    ERIC Educational Resources Information Center

    Bauer, Stephen M.; Flagg, Jennifer L.

    2010-01-01

    A standard and comprehensive model is needed to evaluate and compare technology transfer systems and the stakeholders within these systems. The principle systems considered include federal laboratories, U.S. universities, the rehabilitation engineering research centers (RERCs), and large small business innovation research programs. An earlier…

  8. National Incident Management System (NIMS) Standards Review Panel Workshop Summary Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stenner, Robert D.; Kirk, Jennifer L.; Stanton, James R.

    The importance and need for full compliant implementation of NIMS nationwide was clearly demonstrated during the Hurricane Katrina event, which was clearly expressed in Secretary Chertoff's October 4, 2005 letter addressed to the State's governors. It states, ''Hurricane Katrina was a stark reminder of how critical it is for our nation to approach incident management in a coordinated, consistent, and efficient manner. We must be able to come together, at all levels of government, to prevent, prepare for, respond to, and recover from any emergency or disaster. Our operations must be seamless and based on common incident management doctrine, becausemore » the challenges we face as a nation are far greater than capabilities of any one jurisdiction.'' The NIMS is a system/architecture for organizing response on a ''national'' level. It incorporations ICS as a main component of that structure (i.e., it institutionalizes ICS in NIMS). In a paper published on the NIMS Website, the following statements were made: ''NIMS represents a core set of doctrine, principles, terminology, and organizational processes to enable effective, efficient and collaborative incident management at all levels. To provide the framework for interoperability and compatibility, the NIMS is based on a balance between flexibility and standardization.'' Thus the NIC is challenged with the need to adopt quality SDO generated standards to support NIMS compliance, but in doing so maintain the flexibility necessary so that response operations can be tailored for the specific jurisdictional and geographical needs across the nation. In support of this large and complex challenge facing the NIC, the Pacific Northwest National Laboratory (PNNL) was asked to provide technical support to the NIC, through their DHS Science and Technology ? Standards Portfolio Contract, to help identify, review, and develop key standards for NIMS compliance. Upon examining the challenge, the following general process appears to be a reasonable approach for identifying and establishing existing standards that would be applicable to NIMS compliance. The suggested generalized steps to establishing existing SDO generated standards for NIMS compliance are: (1) establish search criteria from the NIMS and its support documents, (2) search SDO databases to identify key existing nationally and/or internationally recognized standards that have potential application to NIMS compliance needs, (3) review the identified standards against the specific component needs of the NIMS, (4) identify the pertinent aspects/components of those identified standards that clearly address specific NIMS compliance needs, (5) establish a process to adopt the pertinent standards, which includes the generation of formalized FEMA Guidance that identifies the specific NIMS component compliance needs addressed in the respective standard, (6) develop performance criteria for which to measure compliance with the identified NIMS components addressed by the respective adopted standard, and (7) adopt the standard, publish the guidance and performance criteria, and incorporate it into routine FEMA/NIC NIMS management operations. This review process will also help identify real gaps in standards for which new NIMS specific standards should be developed. To jump start this process and hopefully identify some key ''low hanging fruit'' standards the NIC could use to begin such a process, a panel of first-responder experts (familiar with the current standards of common use in the first-responder community) from various response disciplines was formed and a workshop held. The workshop included a pre-workshop information gathering process. This report discusses the workshop and its findings in detail.« less

  9. Enabling MPEG-2 video playback in embedded systems through improved data cache efficiency

    NASA Astrophysics Data System (ADS)

    Soderquist, Peter; Leeser, Miriam E.

    1999-01-01

    Digital video decoding, enabled by the MPEG-2 Video standard, is an important future application for embedded systems, particularly PDAs and other information appliances. Many such system require portability and wireless communication capabilities, and thus face severe limitations in size and power consumption. This places a premium on integration and efficiency, and favors software solutions for video functionality over specialized hardware. The processors in most embedded system currently lack the computational power needed to perform video decoding, but a related and equally important problem is the required data bandwidth, and the need to cost-effectively insure adequate data supply. MPEG data sets are very large, and generate significant amounts of excess memory traffic for standard data caches, up to 100 times the amount required for decoding. Meanwhile, cost and power limitations restrict cache sizes in embedded systems. Some systems, including many media processors, eliminate caches in favor of memories under direct, painstaking software control in the manner of digital signal processors. Yet MPEG data has locality which caches can exploit if properly optimized, providing fast, flexible, and automatic data supply. We propose a set of enhancements which target the specific needs of the heterogeneous types within the MPEG decoder working set. These optimizations significantly improve the efficiency of small caches, reducing cache-memory traffic by almost 70 percent, and can make an enhanced 4 KB cache perform better than a standard 1 MB cache. This performance improvement can enable high-resolution, full frame rate video playback in cheaper, smaller system than woudl otherwise be possible.

  10. Platform for frail elderly people supporting information and communication.

    PubMed

    Man, Yan Ping; Cremers, Ger; Spreeuwenberg, Marieke; de Witte, Luc

    2015-01-01

    There is a growing need for technology to support the frail elderly living independently in home situations. Several telecommunication systems already exist. These systems are developed mainly from the perspective of healthcare professionals and focus on efficient delivery of healthcare services. They hardly meet the specific needs of the frail elderly. In this project a platform with specific needs of the frail elderly people has been designed, running on standard PCs. This system supports living independently, social participation, wellbeing, and asking for care services. The platform was evaluated and subjects assess the system as user friendly, and supportive for their independence and self-reliance. They recommend it to other users.

  11. Public Access Workstations in the Library: New Trends.

    ERIC Educational Resources Information Center

    Beecher, Henry

    1991-01-01

    Discusses the use of microcomputer-based workstations that are provided for public access in libraries. Criteria for workstations are discussed, including standard hardware, open-design software, scalable interface, and connectivity options for networking; systems that provide full-text access are described; and the need for standards is…

  12. Clear as glass: transparent financial reporting.

    PubMed

    Valletta, Robert M

    2005-08-01

    To be transparent, financial information needs to be easily accessible, timely, content-rich, and narrative. Not-for-profit hospitals and health systems should report detailed financial information quarterly. They need internal controls to reduce the level of complexity throughout the organization by creating standardized processes.

  13. Experimenting Design and Implementation of an Educational Services Management System Based on ISO/IEC 20000 Standard

    NASA Astrophysics Data System (ADS)

    Lezcano, Jean-Marc; Adachihara, Hatsuo; Prunier, Marc

    European higher education organizations are encouraged to implement quality management practices. Existing quality standards and frameworks do not capitalize an important set of best practices addressing educational services delivery. The ISO/IEC 20000 standard, elaborated from IT service management issues, is widening its field of application and may represent an interesting alternative. A specific approach is needed to apprehend the particular nature of educational services, consider the systemic cooperating roles of educational system and learning system, and define ISO/IEC 20000 vocabulary and concepts adapted to the domain. ISO/IEC 20000 may provide an answer to European Standard Guideline compliance and improve educational services management. The current experimentation is expected to cast light on the complexity, practicality and effectiveness of the use of ISO/IEC 20000 in a first field of "non IT" services.

  14. Technical standards for micro sensors in surgery and minimally invasive therapy.

    PubMed

    Neuder; Dehm

    2004-04-01

    The development of medical applications is fuelled in the context of steadily growing needs and the requirement of lowering overall costs. Micro systems will have an extremely important impact on medical technology in the future. The great challenges for the wider use of micro structures in health applications are biocompatibility and mass production. Especially small and medium-sized enterprises (SMEs) need help to overcome these problems by free access to knowledge, the availability of standards and contacts to partners.

  15. IMT-2000 Satellite Standards with Applications to Mobile Air Traffic Communications Networks

    NASA Technical Reports Server (NTRS)

    Shamma, Mohammed A.

    2004-01-01

    The International Mobile Telecommunications - 2000 (IMT-2000) standard and more specifically the Satellite component of it, is investigated as a potential alternative for communications to aircraft mobile users en-route and in terminal area. Its application to Air Traffic Management (ATM) communication needs is considered. A summary of the specifications of IMT-2000 satellite standards are outlined. It is shown via a system research analysis that it is possible to support most air traffic communication needs via an IMT-2000 infrastructure. This technology can compliment existing, or future digital aeronautical communications technologies such as VDL2, VDL3, Mode S, and UAT.

  16. Unaltered ethical standards for individual physicians in the face of drastically reduced resources resulting from an improvised nuclear device event.

    PubMed

    Caro, J Jaime; Coleman, C Norman; Knebel, Ann; DeRenzo, Evan G

    2011-01-01

    When disaster disrupts healthcare and other systems, the ethical allocation of resources should follow principles of justice, defined as fairness, established for normal clinical practice. Standards of clinical practice may be altered during disaster, but ethical standards must remain centered on prioritizing the treatment of patients according to need and the effectiveness of treatment. Should resources become extremely limited, it is fair to restrict their use to patients who have the highest needs, provided that the intervention is effective. When resources become more available, patients with lower priority can be increasingly accommodated.

  17. 40 CFR 160.43 - Test system care facilities.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... testing facility shall have a number of animal rooms or other test system areas separate from those... GOOD LABORATORY PRACTICE STANDARDS Facilities § 160.43 Test system care facilities. (a) A testing facility shall have a sufficient number of animal rooms or other test system areas, as needed, to ensure...

  18. 40 CFR 160.43 - Test system care facilities.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... testing facility shall have a number of animal rooms or other test system areas separate from those... GOOD LABORATORY PRACTICE STANDARDS Facilities § 160.43 Test system care facilities. (a) A testing facility shall have a sufficient number of animal rooms or other test system areas, as needed, to ensure...

  19. Advanced telemetry systems for payloads. Technology needs, objectives and issues

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The current trends in advanced payload telemetry are the new developments in advanced modulation/coding, the applications of intelligent techniques, data distribution processing, and advanced signal processing methodologies. Concerted efforts will be required to design ultra-reliable man-rated software to cope with these applications. The intelligence embedded and distributed throughout various segments of the telemetry system will need to be overridden by an operator in case of life-threatening situations, making it a real-time integration issue. Suitable MIL standards on physical interfaces and protocols will be adopted to suit the payload telemetry system. New technologies and techniques will be developed for fast retrieval of mass data. Currently, these technology issues are being addressed to provide more efficient, reliable, and reconfigurable systems. There is a need, however, to change the operation culture. The current role of NASA as a leader in developing all the new innovative hardware should be altered to save both time and money. We should use all the available hardware/software developed by the industry and use the existing standards rather than inventing our own.

  20. Health Care Financing Administration--Medicaid program; Medicaid management information systems. Final rule.

    PubMed

    1980-03-05

    These regulations set forth a new procedure to improve Medicaid management by explicitly authorizing HCFA to expand or revise State Medicaid Management Information Systems (MMIS) as necessary to meet program needs. Under this procedure, HCFA will publish major new requirements for comment before deciding to adopt them, and will provide increased Federal matching and reasonable phase-in time for their implementation. HCFA will also periodically review ongoing systems to determine whether all system requirements and performance standards are being met and may reduce the level of Federal matching for those MMIS systems which do not meet prescribed standards.

  1. Standardized data sharing in a paediatric oncology research network--a proof-of-concept study.

    PubMed

    Hochedlinger, Nina; Nitzlnader, Michael; Falgenhauer, Markus; Welte, Stefan; Hayn, Dieter; Koumakis, Lefteris; Potamias, George; Tsiknakis, Manolis; Saraceno, Davide; Rinaldi, Eugenia; Ladenstein, Ruth; Schreier, Günter

    2015-01-01

    Data that has been collected in the course of clinical trials are potentially valuable for additional scientific research questions in so called secondary use scenarios. This is of particular importance in rare disease areas like paediatric oncology. If data from several research projects need to be connected, so called Core Datasets can be used to define which information needs to be extracted from every involved source system. In this work, the utility of the Clinical Data Interchange Standards Consortium (CDISC) Operational Data Model (ODM) as a format for Core Datasets was evaluated and a web tool was developed which received Source ODM XML files and--via Extensible Stylesheet Language Transformation (XSLT)--generated standardized Core Dataset ODM XML files. Using this tool, data from different source systems were extracted and pooled for joined analysis in a proof-of-concept study, facilitating both, basic syntactic and semantic interoperability.

  2. Standardization of quality control plans for highway bridges in Europe: COST Action TU 1406

    NASA Astrophysics Data System (ADS)

    Casas, Joan R.; Matos, Jose Campos e.

    2017-09-01

    In Europe, as all over the world, the need to manage roadway bridges in an efficient way led to the development of different management systems. Hence, nowadays, many European countries have their own system. Although they present a similar architectural framework, several differences can be appointed. These differences constitute a divergent mechanism that may conduct to different decisions on maintenance actions. Within the roadway bridge management process, the identification of maintenance needs is more effective when developed in a uniform and repeatable manner. This process can be accomplished by the identification of performance indicators and definition of performance goals and key performance indicators (KPI), improving the planning of maintenance strategies. Therefore, a discussion at a European level, seeking to achieve a standardized approach in this subject, will bring significant benefits. Accordingly, a COST Action is under way in Europe with the aim of standardizing the establishment of quality control plans for roadway bridges.

  3. Applying Standard Interfaces to a Process-Control Language

    NASA Technical Reports Server (NTRS)

    Berthold, Richard T.

    2005-01-01

    A method of applying open-operating-system standard interfaces to the NASA User Interface Language (UIL) has been devised. UIL is a computing language that can be used in monitoring and controlling automated processes: for example, the Timeliner computer program, written in UIL, is a general-purpose software system for monitoring and controlling sequences of automated tasks in a target system. In providing the major elements of connectivity between UIL and the target system, the present method offers advantages over the prior method. Most notably, unlike in the prior method, the software description of the target system can be made independent of the applicable compiler software and need not be linked to the applicable executable compiler image. Also unlike in the prior method, it is not necessary to recompile the source code and relink the source code to a new executable compiler image. Abstraction of the description of the target system to a data file can be defined easily, with intuitive syntax, and knowledge of the source-code language is not needed for the definition.

  4. Why do we need to standardize no-tillage research?

    USDA-ARS?s Scientific Manuscript database

    No-tillage / conservation agricultural systems research has now been performed for more than half a century in many countries around the world, but few efforts have been made to standardize research methodology. This has led to a situation where no-tillage research results have often not been direct...

  5. USE OF FAST GC/TOFMS AS REFERENCE STANDARD FOR FIELD COMPARISON STUDIES WITH ON-SITE INSTRUMENTS

    EPA Science Inventory

    A faster reference standard for field comparison studies of portable gas chromatographs (PGC) is needed. A performance evaluation of a high-speed GCMS (FGC/MS) system conducted during 1998 demonstrated generally satisfactory performance, but it was evident that performance of b...

  6. Common Approach to Geoprocessing of Uav Data across Application Domains

    NASA Astrophysics Data System (ADS)

    Percivall, G. S.; Reichardt, M.; Taylor, T.

    2015-08-01

    UAVs are a disruptive technology bringing new geographic data and information to many application domains. UASs are similar to other geographic imagery systems so existing frameworks are applicable. But the diversity of UAVs as platforms along with the diversity of available sensors are presenting challenges in the processing and creation of geospatial products. Efficient processing and dissemination of the data is achieved using software and systems that implement open standards. The challenges identified point to the need for use of existing standards and extending standards. Results from the use of the OGC Sensor Web Enablement set of standards are presented. Next steps in the progress of UAVs and UASs may follow the path of open data, open source and open standards.

  7. [Study on the reorganization of standards related to food contact ceramics and porcelains].

    PubMed

    Zhang, Jianbo; Zhu, Lei; Zhang, Hong; Liu, Shan; Wang, Zhutian

    2014-07-01

    To solve the problem of overlap, iterance and conflict among current standards related to food contact ceramics and porcelains. To collect all the current standards related to food contact ceramics and porcelains and reorganize them following the settled principles and method and list the standards that need to be revoked, revised, incorporated, or keep valid and excluded from the food safety standard system. 19 standards were collected in this study and reorganized. The main food safety indexes in these standards were the limits for lead and cadmium that released from food contact ceramics and porcelains. There were released limits for lead and cadmium in 10 standards, including 4 horizontal standards and 6 commodity standards. The provisions in these 10 standards were in conflict. And as a result of this, the 4 horizontal standards were suggested to be incorporated and revised to one food safety standard, while the 6 commodity standards were suggested to be revised and exclude the lead and cadmium provisions. Another 7 commodity standards only referenced provisions for lead and cadmium limits from horizontal standards, and these 7 standards were suggested to be excluded from food safety standard system. There were no food safety indexes in 2 standards of the 19 standards, these standards were considered not related to food safety and no need to be reorganized. There were conflicts about the released limits of lead and cadmium among the current standards related to food contact ceramics and porcelains. So, it is necessary to a set up a new food safety standard for released lead and cadmium permissible limits which can apply to all food contact ceramics and porcelains. This food safety standard should be based on food safety risk assessment and the actual situations of manufacture and usage of food contact ceramics and porcelains. The provisions in international standards and relative standards from other countries can also provide references to this standard.

  8. Spaceflight Human System Standards

    NASA Technical Reports Server (NTRS)

    Holubec, Keith; Tillman, Barry; Connolly, Jan

    2009-01-01

    NASA created a new approach for human system integration and human performance standards. NASA created two documents a standard and a reference handbook. The standard is titled NASA Space Flight Human-System Standard (SFHSS) and consists of two-volumes: Volume 1- Crew Health This volume covers standards needed to support astronaut health (medical care, nutrition, sleep, exercise, etc.) Volume 2 Human Factors, Habitability and Environmental Health This volume covers the standards for system design that will maintain astronaut performance (ie., environmental factors, design of facilities, layout of workstations, and lighting requirements). It includes classic human factors requirements. The new standards document is written in terms so that it is applicable to a broad range of present and future NASA systems. The document states that all new programs prepare system-specific requirements that will meet the general standards. For example, the new standard does not specify a design should accommodate specific percentiles of a defined population. Rather, NASA-STD-3001, Volume 2 states that all programs shall prepare program-specific requirements that define the user population and their size ranges. The design shall then accommodate the full size range of those users. The companion reference handbook, Human Integration Design Handbook (HIDH), was developed to capture the design consideration information from NASA-STD-3000, and adds spaceflight lessons learned, gaps in knowledge, example solutions, and suggests research to further mature specific disciplines. The HIDH serves two major purposes: HIDH is the reference document for writing human factors requirements for specific systems. HIDH contains design guidance information that helps insure that designers create systems which safely and effectively accommodate the capabilities and limitations of space flight crews.

  9. Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software

    NASA Technical Reports Server (NTRS)

    Graydon, Patrick J.; Holloway, C. Michael

    2015-01-01

    We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.

  10. Human Factors Integration Challenges in the Terminal Radar Approach Control (TRACON) Environment

    DOT National Transportation Integrated Search

    2003-01-01

    This document describes human factors challenges that need to be considered in the implementation of planned enhancements to : the Standard Terminal Automation Replacement System (STARS), Common Automated Radar Terminal System (ARTS), and the : ARTS ...

  11. Human factors integration challenges in the terminal radar approach control (TRACON) environment

    DOT National Transportation Integrated Search

    2003-01-31

    This document describes human factors challenges that need to be considered in the implementation of planned enhancements to the Standard Terminal Automation Replacement System (STARS), Common Automated Radar terminal System (ARTS), and the ARTS Colo...

  12. Quantifying usability: an evaluation of a diabetes mHealth system on effectiveness, efficiency, and satisfaction metrics with associated user characteristics.

    PubMed

    Georgsson, Mattias; Staggers, Nancy

    2016-01-01

    Mobile health (mHealth) systems are becoming more common for chronic disease management, but usability studies are still needed on patients' perspectives and mHealth interaction performance. This deficiency is addressed by our quantitative usability study of a mHealth diabetes system evaluating patients' task performance, satisfaction, and the relationship of these measures to user characteristics. We used metrics in the International Organization for Standardization (ISO) 9241-11 standard. After standardized training, 10 patients performed representative tasks and were assessed on individual task success, errors, efficiency (time on task), satisfaction (System Usability Scale [SUS]) and user characteristics. Tasks of exporting and correcting values proved the most difficult, had the most errors, the lowest task success rates, and consumed the longest times on task. The average SUS satisfaction score was 80.5, indicating good but not excellent system usability. Data trends showed males were more successful in task completion, and younger participants had higher performance scores. Educational level did not influence performance, but a more recent diabetes diagnosis did. Patients with more experience in information technology (IT) also had higher performance rates. Difficult task performance indicated areas for redesign. Our methods can assist others in identifying areas in need of improvement. Data about user background and IT skills also showed how user characteristics influence performance and can provide future considerations for targeted mHealth designs. Using the ISO 9241-11 usability standard, the SUS instrument for satisfaction and measuring user characteristics provided objective measures of patients' experienced usability. These could serve as an exemplar for standardized, quantitative methods for usability studies on mHealth systems. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association.

  13. Quantifying usability: an evaluation of a diabetes mHealth system on effectiveness, efficiency, and satisfaction metrics with associated user characteristics

    PubMed Central

    Staggers, Nancy

    2016-01-01

    Objective Mobile health (mHealth) systems are becoming more common for chronic disease management, but usability studies are still needed on patients’ perspectives and mHealth interaction performance. This deficiency is addressed by our quantitative usability study of a mHealth diabetes system evaluating patients’ task performance, satisfaction, and the relationship of these measures to user characteristics. Materials and Methods We used metrics in the International Organization for Standardization (ISO) 9241-11 standard. After standardized training, 10 patients performed representative tasks and were assessed on individual task success, errors, efficiency (time on task), satisfaction (System Usability Scale [SUS]) and user characteristics. Results Tasks of exporting and correcting values proved the most difficult, had the most errors, the lowest task success rates, and consumed the longest times on task. The average SUS satisfaction score was 80.5, indicating good but not excellent system usability. Data trends showed males were more successful in task completion, and younger participants had higher performance scores. Educational level did not influence performance, but a more recent diabetes diagnosis did. Patients with more experience in information technology (IT) also had higher performance rates. Discussion Difficult task performance indicated areas for redesign. Our methods can assist others in identifying areas in need of improvement. Data about user background and IT skills also showed how user characteristics influence performance and can provide future considerations for targeted mHealth designs. Conclusion Using the ISO 9241-11 usability standard, the SUS instrument for satisfaction and measuring user characteristics provided objective measures of patients’ experienced usability. These could serve as an exemplar for standardized, quantitative methods for usability studies on mHealth systems. PMID:26377990

  14. [Convergence of healthcare regulation in the Americas: history, development, and new challenges].

    PubMed

    Silva, Ana Paula Jucá; Tagliari, Patrícia Oliveira Pereira

    2016-05-01

    The present article describes the changing relationship among healthcare regulatory authorities in various international settings, with special emphasis on the Americas. As other sectors, healthcare also faces the need to regulate international practices, while at the same time taking into consideration the specific realities of each country. Regulatory convergence - a movement towards technical alignment to enable the adoption of local regulatory mechanisms that take into account internationally recognized standards and principles to promote a single sanitary goal - has emerged as a means to address this challenge. Organizations that already use this tool, such as the International Conference of Drug Regulatory Authorities (ICDRA), Pan American Network for Drug Regulatory Harmonization (PANDRH), International Generic Drug Regulators Programme (IGDRP), and the International Medical Device Regulators Forum (IMDRF), among others, are currently working to gather knowledge, data, and specialists from different countries to build an international technical and scientific standard that can be used for decision-making by local regulators. This would ensure convergence of national regulations despite the need to adapt international standards to local needs, structure, and capacities. The most recent resolutions issued by the World Health Organization recognize the need to bring regulatory systems closer to the reality of national healthcare systems, and underscore the advantages of using existing local guidelines as input for cooperation with regulatory authorities.

  15. Toward an interim standard for patient-centered knowledge-access.

    PubMed Central

    Tuttle, M. S.; Sherertz, D. D.; Fagan, L. M.; Carlson, R. W.; Cole, W. G.; Schipma, P. B.; Nelson, S. J.

    1993-01-01

    Most care-giver "knowledge" needs arise at the point of care and are "patient-centered." Many of these knowledge needs can be met using existing on-line knowledge sources, but the process is too time-consuming, currently, for even the computer-proficient. We are developing a set of public domain standards aimed at bringing potentially relevant knowledge to the point of care in a straight-forward and timely fashion. The standards will a) make use of selected items from a Computer-based Patient Record (CPR), e.g., a diagnosis and measure of severity, b) anticipate certain care-giver knowledge needs, e.g., "therapy," "protocols," "complications," and c) try to satisfy those needs from available knowledge sources, e.g., knowledge-bases, citation databases, practice guidelines, and on-line textbooks. The standards will use templates, i.e., fill-in-the-blank structures, to anticipate knowledge needs and UMLS Metathesaurus enhancements to represent the content of knowledge sources. Together, the standards will form the specification for a "Knowledge-Server" (KS) designed to be accessed from any CPR system. Plans are in place to test an interim version of this specification in the context of medical oncology. We are accumulating anecdotal evidence that a KS operating in conjunction with a CPR is much more compelling to users than either a CPR or a KS operating alone. PMID:8130537

  16. Integrated System Health Management: Foundational Concepts, Approach, and Implementation

    NASA Technical Reports Server (NTRS)

    Figueroa, Fernando

    2009-01-01

    A sound basis to guide the community in the conception and implementation of ISHM (Integrated System Health Management) capability in operational systems was provided. The concept of "ISHM Model of a System" and a related architecture defined as a unique Data, Information, and Knowledge (DIaK) architecture were described. The ISHM architecture is independent of the typical system architecture, which is based on grouping physical elements that are assembled to make up a subsystem, and subsystems combine to form systems, etc. It was emphasized that ISHM capability needs to be implemented first at a low functional capability level (FCL), or limited ability to detect anomalies, diagnose, determine consequences, etc. As algorithms and tools to augment or improve the FCL are identified, they should be incorporated into the system. This means that the architecture, DIaK management, and software, must be modular and standards-based, in order to enable systematic augmentation of FCL (no ad-hoc modifications). A set of technologies (and tools) needed to implement ISHM were described. One essential tool is a software environment to create the ISHM Model. The software environment encapsulates DIaK, and an infrastructure to focus DIaK on determining health (detect anomalies, determine causes, determine effects, and provide integrated awareness of the system to the operator). The environment includes gateways to communicate in accordance to standards, specially the IEEE 1451.1 Standard for Smart Sensors and Actuators.

  17. Computer-aided detection (CAD) of breast cancer on full field digital and screening film mammograms

    NASA Astrophysics Data System (ADS)

    Sun, Xuejun; Qian, Wei; Song, Xiaoshan; Qian, Yuyan; Song, Dansheng; Clark, Robert A.

    2003-05-01

    Full-field digital mammography (FFDM) as a new breast imaging modality has potential to detect more breast cancers or to detect them at smaller sizes and earlier stages compared with screening film mammography (SFM). However, its performance needs verification, and it would pose new problems for the development of CAD methods for breast cancer detection and diagnosis. Performance evaluation of CAD systems on FFDM and SFM has been conducted in this study, respectively. First, an adaptive CAD system employing a series of advanced modules has been developed on FFDM. Second, a standardization approach has been developed to make the CAD system independent of characteristics of digitizer or imaging modalities for mammography. CAD systems developed previously for SFM and developed in this study for FFDM have been evaluated on FFDM and SFM images without and with standardization, respectively, to examine the performance improvement of the CAD system developed in this study. Computerized free-response receiver operating characteristic (FROC) analysis has been adopted as performance evaluation method. Compared with previous one, the CAD system developed in this study demonstrated significantly performance improvements. However, the comparison results have shown that the performances of final CAD system in this study are not significantly different on FFDM and on SFM after standardization. It needs further study on the assessment of CAD system performance on FFDM and SFM modalities.

  18. Development of the Gross Motor Function Classification System (1997)

    ERIC Educational Resources Information Center

    Morris, Christopher

    2008-01-01

    To address the need for a standardized system to classify the gross motor function of children with cerebral palsy, the authors developed a five-level classification system analogous to the staging and grading systems used in medicine. Nominal group process and Delphi survey consensus methods were used to examine content validity and revise the…

  19. Rethinking Education in Botswana: A Need to Overhaul the Botswana Education System

    ERIC Educational Resources Information Center

    Makwinja, Veronica Margaret

    2017-01-01

    Botswana through its two educational reform philosophies of 1977 and 1994 envisioned a developing education system that is on par with international standards. According to Tabulawa (2009), the education system was developed to produce critical thinkers, problem solvers, and innovative learners. The system was designed to provide opportunities for…

  20. Achieving mask order processing automation, interoperability and standardization based on P10

    NASA Astrophysics Data System (ADS)

    Rodriguez, B.; Filies, O.; Sadran, D.; Tissier, Michel; Albin, D.; Stavroulakis, S.; Voyiatzis, E.

    2007-02-01

    Last year the MUSCLE (Masks through User's Supply Chain: Leadership by Excellence) project was presented. Here is the project advancement. A key process in mask supply chain management is the exchange of technical information for ordering masks. This process is large, complex, company specific and error prone, and leads to longer cycle times and higher costs due to missing or wrong inputs. Its automation and standardization could produce significant benefits. We need to agree on the standard for mandatory and optional parameters, and also a common way to describe parameters when ordering. A system was created to improve the performance in terms of Key Performance Indicators (KPIs) such as cycle time and cost of production. This tool allows us to evaluate and measure the effect of factors, as well as the effect of implementing the improvements of the complete project. Next, a benchmark study and a gap analysis were performed. These studies show the feasibility of standardization, as there is a large overlap in requirements. We see that the SEMI P10 standard needs enhancements. A format supporting the standard is required, and XML offers the ability to describe P10 in a flexible way. Beyond using XML for P10, the semantics of the mask order should also be addressed. A system design and requirements for a reference implementation for a P10 based management system are presented, covering a mechanism for the evolution and for version management and a design for P10 editing and data validation.

  1. International Metadata Standards and Enterprise Data Quality Metadata Systems

    NASA Technical Reports Server (NTRS)

    Habermann, Ted

    2016-01-01

    Well-documented data quality is critical in situations where scientists and decision-makers need to combine multiple datasets from different disciplines and collection systems to address scientific questions or difficult decisions. Standardized data quality metadata could be very helpful in these situations. Many efforts at developing data quality standards falter because of the diversity of approaches to measuring and reporting data quality. The one size fits all paradigm does not generally work well in this situation. I will describe these and other capabilities of ISO 19157 with examples of how they are being used to describe data quality across the NASA EOS Enterprise and also compare these approaches with other standards.

  2. Building a Biomedical Cyberinfrastructure for Collaborative Research

    PubMed Central

    Schad, Peter A.; Mobley, Lee Rivers; Hamilton, Carol M.

    2018-01-01

    For the potential power of genome-wide association studies (GWAS) and translational medicine to be realized, the biomedical research community must adopt standard measures, vocabularies, and systems to establish an extensible biomedical cyberinfrastructure. Incorporating standard measures will greatly facilitate combining and comparing studies via meta-analysis, which is a means for deriving larger populations, needed for increased statistical power to detect less apparent and more complex associations (gene-environment interactions and polygenic gene-gene interactions). Incorporating consensus-based and well-established measures into various studies should reduce the variability across studies due to attributes of measurement, making findings across studies more comparable. This article describes two consensus-based approaches to establishing standard measures and systems: PhenX (consensus measures for Phenotypes and eXposures), and the Open Geospatial Consortium (OGC). National Institutes of Health support for these efforts has produced the PhenX Toolkit, an assembled catalog of standard measures for use in GWAS and other large-scale genomic research efforts, and the RTI Spatial Impact Factor Database (SIFD), a comprehensive repository of georeferenced variables and extensive metadata that conforms to OGC standards. The need for coordinated development of cyberinfrastructure to support collaboration and data interoperability is clear, and we discuss standard protocols for ensuring data compatibility and interoperability. Adopting a cyberinfrastructure that includes standard measures, vocabularies, and open-source systems architecture will enhance the potential of future biomedical and translational research. Establishing and maintaining the cyberinfrastructure will require a fundamental change in the way researchers think about study design, collaboration, and data storage and analysis. PMID:21521587

  3. Coordination of International Standards with Implementation of the IECRE Conformity Assessment System to Provide Multiple Certification Offerings for PV Power Plants

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kelly, George; Haring, Adrian; Spooner, Ted

    To help address the industry's needs for assuring the value and reducing the risk of investments in PV power plants; the International Electrotechnical Commission (IEC) has established a new conformity assessment system for renewable energy (IECRE). There are presently important efforts underway to define the requirements for various types of PV system certificates, and publication of the international standards upon which these certifications will be based. This paper presents a detailed analysis of the interrelationship of these activities and the timing for initiation of IECRE PV system certifications.

  4. P21 Common Core Toolkit: A Guide to Aligning the Common Core State Standards with the Framework for 21st Century Skills

    ERIC Educational Resources Information Center

    Partnership for 21st Century Skills, 2011

    2011-01-01

    Standards drive critical elements of the American educational system--the curricula that schools follow, the textbooks students read, and the tests they take. Similarly, standards establish the levels of performance that students, teachers and schools are expected to meet. To succeed in the 21st century, all students will need to perform to high…

  5. IEEE Standards activities: A year in review. Annual activities report 1996

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1997-09-01

    For IEEE Standards and the constituency it serves, 1996 was a milestone year. It was a period that signaled the beginning of the Standards Program of the future. This program responds to worldwide standards issues and to the technical, market and competitive strategies of industrial sectors. It represents technological innovation, global participation in electrotechnology standards development and dedication to the on-going advancement and promotion of new concepts and technology. Instrumental in ensuring IEEE`s growth opportunities and leadership position in electrotechnology standards development and dissemination is IEEE membership. The value of members and their involvement in IEEE Standards is vital tomore » IEEE`s ability to continuously be the best professional association in the world. To fulfill this vision, IEEE set forth five goals -- increased globalization, career enhancement, electronic dissemination of existing products and services, organizational improvements and public responsibility. Key in the process for the achievement of these goals is to make certain that IEEE members are well informed about opportunities and benefits the present system of standardization offers, and what the future system will offer. With the member in mind, the Standards Board reviewed its strategic direction and operational structures, and its ability to deliver products and services that are needed now and, more importantly, that will be needed in the future. This Annual Activities Report provides a comprehensive picture of 1996 accomplishments and performance. It gives readers a broad picture of the Standards Board`s activities, the evolving role of IEEE Standards and the technological opportunities that the Board encourages.« less

  6. Defense Acquisitions: DOD Efforts to Adopt Open Systems for Its Unmanned Aircraft Systems Have Progressed Slowly

    DTIC Science & Technology

    2013-07-01

    applications introduced by third-party developers to connect to the Android operating system through an open software interface. This allows customers...Definition Multimedia Interface have been developed to address the need for standards for high-definition televisions and computer monitors. Perhaps

  7. Mitigating the Health Risks of Dining Out: The Need for Standardized Portion Sizes in Restaurants

    PubMed Central

    Story, Mary

    2014-01-01

    Because restaurants routinely serve food with more calories than people need, dining out represents a risk factor for overweight, obesity, and other diet-related chronic diseases. Most people lack the capacity to judge the caloric content of food and there is limited evidence that people make use of calorie-labeling information when it is available. Standardized portion sizes would not preclude people from eating as much as they want, but would make the amount they are getting fully transparent. We describe the potential benefits and means of implementing a system of standardized portion sizes that might facilitate a healthier diet among the US population. PMID:24524513

  8. Planning for a Longitudinal Data System: A Needs Assessment with PreK-16 Stakeholders

    ERIC Educational Resources Information Center

    Nunn, Jacqueline A.; Mainzer, K. Lynne; Bautz, Annette M.

    2009-01-01

    Legislation, enacted by an increasing number of states in response to No Child Left Behind (NCLB), ushers in new accountability standards with significant implications for administrators and teachers. Educators are facing greater pressures to employ effective strategies for helping students meet curriculum standards and to prove that these…

  9. 75 FR 14386 - Interpretation of Transmission Planning Reliability Standard

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-25

    ... created electronically using word processing software should be filed in native applications or print-to.... FERC, 564 F.3d 1342 (DC Cir. 2009). \\6\\ Mandatory Reliability Standards for the Bulk-Power System... print-to-PDF format and not in a scanned format. Commenters filing electronically do not need to make a...

  10. Near-infrared fluorescence image quality test methods for standardized performance evaluation

    NASA Astrophysics Data System (ADS)

    Kanniyappan, Udayakumar; Wang, Bohan; Yang, Charles; Ghassemi, Pejhman; Wang, Quanzeng; Chen, Yu; Pfefer, Joshua

    2017-03-01

    Near-infrared fluorescence (NIRF) imaging has gained much attention as a clinical method for enhancing visualization of cancers, perfusion and biological structures in surgical applications where a fluorescent dye is monitored by an imaging system. In order to address the emerging need for standardization of this innovative technology, it is necessary to develop and validate test methods suitable for objective, quantitative assessment of device performance. Towards this goal, we develop target-based test methods and investigate best practices for key NIRF imaging system performance characteristics including spatial resolution, depth of field and sensitivity. Characterization of fluorescence properties was performed by generating excitation-emission matrix properties of indocyanine green and quantum dots in biological solutions and matrix materials. A turbid, fluorophore-doped target was used, along with a resolution target for assessing image sharpness. Multi-well plates filled with either liquid or solid targets were generated to explore best practices for evaluating detection sensitivity. Overall, our results demonstrate the utility of objective, quantitative, target-based testing approaches as well as the need to consider a wide range of factors in establishing standardized approaches for NIRF imaging system performance.

  11. Globalization in the Face of Standardization: Implications for Teacher Education

    ERIC Educational Resources Information Center

    Delgado, Rocio; Norman, Patricia

    2008-01-01

    As globalization affects political and economic systems, cultures, and the environment, it affects the educational needs of a globalized workforce. In this complex, fast-evolving knowledge economy, workers must possess analytic skills, creativity, flexibility, and innovation. They need oral and written communication skills and the disposition to…

  12. Materials Flow and Sustainability

    USGS Publications Warehouse

    Sznopek, John L.; Brown, William M.

    1998-01-01

    Materials extracted from the Earth are necessary to produce our most fundamental needs – food, clothing, and shelter. Materials are needed to maintain and improve our standard of living. Understanding the whole system of materials flow, from source to ultimate disposition, can help us better manage the use of natural resources and protect the environment.

  13. PDS4: Developing the Next Generation Planetary Data System

    NASA Technical Reports Server (NTRS)

    Crichton, D.; Beebe, R.; Hughes, S.; Stein, T.; Grayzeck, E.

    2011-01-01

    The Planetary Data System (PDS) is in the midst of a major upgrade to its system. This upgrade is a critical modernization of the PDS as it prepares to support the future needs of both the mission and scientific community. It entails improvements to the software system and the data standards, capitalizing on newer, data system approaches. The upgrade is important not only for the purpose of capturing results from NASA planetary science missions, but also for improving standards and interoperability among international planetary science data archives. As the demands of the missions and science community increase, PDS is positioning itself to evolve and meet those demands.

  14. Deployment of Directory Service for IEEE N Bus Test System Information

    NASA Astrophysics Data System (ADS)

    Barman, Amal; Sil, Jaya

    2008-10-01

    Exchanging information over Internet and Intranet becomes a defacto standard in computer applications, among various users and organizations. Distributed system study, e-governance etc require transparent information exchange between applications, constituencies, manufacturers, and vendors. To serve these purposes database system is needed for storing system data and other relevant information. Directory service, which is a specialized database along with access protocol, could be the single solution since it runs over TCP/IP, supported by all POSIX compliance platforms and is based on open standard. This paper describes a way to deploy directory service, to store IEEE n bus test system data and integrating load flow program with it.

  15. Electronic Information Standards to Support Obesity Prevention and Bridge Services Across Systems, 2010-2015.

    PubMed

    Wiltz, Jennifer L; Blanck, Heidi M; Lee, Brian; Kocot, S Lawrence; Seeff, Laura; McGuire, Lisa C; Collins, Janet

    2017-10-26

    Electronic information technology standards facilitate high-quality, uniform collection of data for improved delivery and measurement of health care services. Electronic information standards also aid information exchange between secure systems that link health care and public health for better coordination of patient care and better-informed population health improvement activities. We developed international data standards for healthy weight that provide common definitions for electronic information technology. The standards capture healthy weight data on the "ABCDs" of a visit to a health care provider that addresses initial obesity prevention and care: assessment, behaviors, continuity, identify resources, and set goals. The process of creating healthy weight standards consisted of identifying needs and priorities, developing and harmonizing standards, testing the exchange of data messages, and demonstrating use-cases. Healthy weight products include 2 message standards, 5 use-cases, 31 LOINC (Logical Observation Identifiers Names and Codes) question codes, 7 healthy weight value sets, 15 public-private engagements with health information technology implementers, and 2 technical guides. A logic model and action steps outline activities toward better data capture, interoperable systems, and information use. Sharing experiences and leveraging this work in the context of broader priorities can inform the development of electronic information standards for similar core conditions and guide strategic activities in electronic systems.

  16. Electronic Information Standards to Support Obesity Prevention and Bridge Services Across Systems, 2010–2015

    PubMed Central

    Blanck, Heidi M.; Lee, Brian; Kocot, S. Lawrence; Seeff, Laura; McGuire, Lisa C.; Collins, Janet

    2017-01-01

    Electronic information technology standards facilitate high-quality, uniform collection of data for improved delivery and measurement of health care services. Electronic information standards also aid information exchange between secure systems that link health care and public health for better coordination of patient care and better-informed population health improvement activities. We developed international data standards for healthy weight that provide common definitions for electronic information technology. The standards capture healthy weight data on the “ABCDs” of a visit to a health care provider that addresses initial obesity prevention and care: assessment, behaviors, continuity, identify resources, and set goals. The process of creating healthy weight standards consisted of identifying needs and priorities, developing and harmonizing standards, testing the exchange of data messages, and demonstrating use-cases. Healthy weight products include 2 message standards, 5 use-cases, 31 LOINC (Logical Observation Identifiers Names and Codes) question codes, 7 healthy weight value sets, 15 public–private engagements with health information technology implementers, and 2 technical guides. A logic model and action steps outline activities toward better data capture, interoperable systems, and information use. Sharing experiences and leveraging this work in the context of broader priorities can inform the development of electronic information standards for similar core conditions and guide strategic activities in electronic systems. PMID:29072985

  17. Mechanization of library procedures in the medium-sized medical library. 8. Computer applications in hospital departmental libraries.

    PubMed

    Howard, E; Kharibian, G

    1972-07-01

    To test the hypothesis that a standard library system could be designed for hospital departmental libraries, a system was developed and partially tested for four departmental libraries in the Washington University School of Medicine and Associated Hospitals. The system from determination of needs through design and evaluation, is described. The system was limited by specific constraints to control of the monograph collection. Products of control include catalog cards, accessions list, new book list, location list, fund list, missing book list, and discard book list. Sample data form and pages from a procedure manual are given, and conversion from a manual to an automated system is outlined. The question of standardization of library records and procedures is discussed, with indications of the way in which modular design, as utilized in this system, could contribute to greater flexibility in design of future systems. Reference is made to anticipating needs for organizing departmental libraries in developing regional medical library programs and to exploring the role of the departmental library in a medical library network.

  18. Wind Tunnel Balance Calibration: Are 1,000,000 Data Points Enough?

    NASA Technical Reports Server (NTRS)

    Rhew, Ray D.; Parker, Peter A.

    2016-01-01

    Measurement systems are typically calibrated based on standard practices established by a metrology standards laboratory, for example the National Institute for Standards and Technology (NIST), or dictated by an organization's metrology manual. Therefore, the calibration is designed and executed according to an established procedure. However, for many aerodynamic research measurement systems a universally accepted standard, traceable approach does not exist. Therefore, a strategy for how to develop a calibration protocol is left to the developer or user to define based on experience and recommended practice in their respective industry. Wind tunnel balances are one such measurement system. Many different calibration systems, load schedules and procedures have been developed for balances with little consensus on a recommended approach. Especially lacking is guidance the number of calibration data points needed. Regrettably, the number of data points tends to be correlated with the perceived quality of the calibration. Often, the number of data points is associated with ones ability to generate the data rather than by a defined need in support of measurement objectives. Hence the title of the paper was conceived to challenge recent observations in the wind tunnel balance community that shows an ever increasing desire for more data points per calibration absent of guidance to determine when there are enough. This paper presents fundamental concepts and theory to aid in the development of calibration procedures for wind tunnel balances and provides a framework that is generally applicable to the characterization and calibration of other measurement systems. Questions that need to be answered are for example: What constitutes an adequate calibration? How much data are needed in the calibration? How good is the calibration? This paper will assist a practitioner in answering these questions by presenting an underlying theory on how to evaluate a calibration based on objective measures. This will enable the developer and user to design calibrations with quantified performance in terms of their capability to meet the user's objectives and a basis for comparing existing calibrations that may have been developed in an ad-hoc manner.

  19. Development of spatial data guidelines and standards: spatial data set documentation to support hydrologic analysis in the U.S. Geological Survey

    USGS Publications Warehouse

    Fulton, James L.

    1992-01-01

    Spatial data analysis has become an integral component in many surface and sub-surface hydrologic investigations within the U.S. Geological Survey (USGS). Currently, one of the largest costs in applying spatial data analysis is the cost of developing the needed spatial data. Therefore, guidelines and standards are required for the development of spatial data in order to allow for data sharing and reuse; this eliminates costly redevelopment. In order to attain this goal, the USGS is expanding efforts to identify guidelines and standards for the development of spatial data for hydrologic analysis. Because of the variety of project and database needs, the USGS has concentrated on developing standards for documenting spatial sets to aid in the assessment of data set quality and compatibility of different data sets. An interim data set documentation standard (1990) has been developed that provides a mechanism for associating a wide variety of information with a data set, including data about source material, data automation and editing procedures used, projection parameters, data statistics, descriptions of features and feature attributes, information on organizational contacts lists of operations performed on the data, and free-form comments and notes about the data, made at various times in the evolution of the data set. The interim data set documentation standard has been automated using a commercial geographic information system (GIS) and data set documentation software developed by the USGS. Where possible, USGS developed software is used to enter data into the data set documentation file automatically. The GIS software closely associates a data set with its data set documentation file; the documentation file is retained with the data set whenever it is modified, copied, or transferred to another computer system. The Water Resources Division of the USGS is continuing to develop spatial data and data processing standards, with emphasis on standards needed to support hydrologic analysis, hydrologic data processing, and publication of hydrologic thermatic maps. There is a need for the GIS vendor community to develop data set documentation tools similar to those developed by the USGS, or to incorporate USGS developed tools in their software.

  20. Educators' insights in using chronicle diabetes: a data management system for diabetes education.

    PubMed

    Wang, Jing; Siminerio, Linda M

    2013-01-01

    Diabetes educators lack data systems to monitor diabetes self-management education processes and programs. The purpose of the study is to explore diabetes educator's insights in using a diabetes education data management program: the Chronicle Diabetes system. We conducted 1 focus group with 8 diabetes educators who use the Chronicle system in western Pennsylvania. The focus group was audiotaped and transcribed verbatim. Themes were categorized according to system facilitators and barriers in using Chronicle. Educators report 4 system facilitators and 4 barrier features. System facilitators include (1) ability to extract data from Chronicle for education program recognition, (2) central location for collecting and documenting all patient and education data, (3) capability to monitor behavioral goal setting and clinical outcomes, and (4) use of a patient snapshot report that automatically summarizes behavioral goal setting and an education plan. Barriers reported are (1) initially time-consuming for data entry, (2) Health Insurance Portability and Accountability Act privacy concerns for e-mailing or downloading report, (3) need for special features (e.g., ability to attach a food diary), and (4) need to enhance existing features to standardize goal-setting process and incorporate psychosocial content. Educators favor capabilities for documenting program requirements, goal setting, and patient summaries. Barriers that need to be overcome are the amount of time needed for data entry, privacy, and special features. Diabetes educators conclude that a data management system such as Chronicle facilitates the education process and affords ease in documentation of meeting diabetes self-management education standards and recognition requirements.

  1. A Robotics Systems Design Need: A Design Standard to Provide the Systems Focus that is Required for Longterm Exploration Efforts

    NASA Technical Reports Server (NTRS)

    Dischinger, H. Charles., Jr.; Mullins, Jeffrey B.

    2005-01-01

    The United States is entering a new period of human exploration of the inner Solar System, and robotic human helpers will be partners in that effort. In order to support integration of these new worker robots into existing and new human systems, a new design standard should be developed, to be called the Robot-Systems Integration Standard (RSIS). It will address the requirements for and constraints upon robotic collaborators with humans. These workers are subject to the same functional constraints as humans of work, reach, and visibility/situational awareness envelopes, and they will deal with the same maintenance and communication interfaces. Thus, the RSIS will be created by discipline experts with the same sort of perspective on these and other interface concerns as human engineers.

  2. Examining Mars with SPICE

    NASA Technical Reports Server (NTRS)

    Acton, Charles H.; Bachman, Nathaniel J.; Bytof, Jeff A.; Semenov, Boris V.; Taber, William; Turner, F. Scott; Wright, Edward D.

    1999-01-01

    The International Mars Conference highlights the wealth of scientific data now and soon to be acquired from an international armada of Mars-bound robotic spacecraft. Underlying the planning and interpretation of these scientific observations around and upon Mars are ancillary data and associated software needed to deal with trajectories or locations, instrument pointing, timing and Mars cartographic models. The NASA planetary community has adopted the SPICE system of ancillary data standards and allied tools to fill the need for consistent, reliable access to these basic data and a near limitless range of derived parameters. After substantial rapid growth in its formative years, the SPICE system continues to evolve today to meet new needs and improve ease of use. Adaptations to handle landers and rovers were prototyped on the Mars pathfinder mission and will next be used on Mars '01-'05. Incorporation of new methods to readily handle non-inertial reference frames has vastly extended the capability and simplified many computations. A translation of the SPICE Toolkit software suite to the C language has just been announced. To further support cartographic calculations associated with Mars exploration the SPICE developers at JPL have recently been asked by NASA to work with cartographers to develop standards and allied software for storing and accessing control net and shape model data sets; these will be highly integrated with existing SPICE components. NASA specifically supports the widest possible utilization of SPICE capabilities throughout the international space science community. With NASA backing the Russian Space Agency and Russian Academy of Science adopted the SPICE standards for the Mars 96 mission. The SPICE ephemeris component will shortly become the international standard for agencies using the Deep Space Network. U.S. and European scientists hope that ESA will employ SPICE standards on the Mars Express mission. SPICE is an open set of standards, and all related specifications and software are freely distributed around the world. This poster describes the current state of SPICE system development, with special emphasis on current and planned support for Mars exploration missions.

  3. Need low-cost networking? Consider DeviceNet

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Moss, W.H.

    1996-11-01

    The drive to reduce production costs and optimize system performance in manufacturing facilities causes many end users to invest in network solutions. Because of distinct differences between the way tasks are performed and the way data are handled for various applications, it is clear than more than one network will be needed in most facilities. What is not clear is which network is most appropriate for a given application. The information layer is the link between automation and information environments via management information systems (MISs) and manufacturing execution systems (MESs) and manufacturing execution systems (MESs). Here the market has chosenmore » a de facto standard in Ethernet, primarily transmission control protocol/internet protocol (TCP/IP) and secondarily manufacturing messaging system (MMS). There is no single standard at the device layer. However, the DeviceNet communication standard has made strides to reach this goal. This protocol eliminates expensive hardwiring and provides improved communication between devices and important device-level diagnostics not easily accessible or available through hardwired I/O interfaces. DeviceNet is a low-cost communications link connecting industrial devices to a network. Many original equipment manufacturers and end users have chosen the DeviceNet platform for several reasons, but most frequently because of four key features: interchangeability; low cost; advanced diagnostics; insert devices under power.« less

  4. Design and implementation of the standards-based personal intelligent self-management system (PICS).

    PubMed

    von Bargen, Tobias; Gietzelt, Matthias; Britten, Matthias; Song, Bianying; Wolf, Klaus-Hendrik; Kohlmann, Martin; Marschollek, Michael; Haux, Reinhold

    2013-01-01

    Against the background of demographic change and a diminishing care workforce there is a growing need for personalized decision support. The aim of this paper is to describe the design and implementation of the standards-based personal intelligent care systems (PICS). PICS makes consistent use of internationally accepted standards such as the Health Level 7 (HL7) Arden syntax for the representation of the decision logic, HL7 Clinical Document Architecture for information representation and is based on a open-source service-oriented architecture framework and a business process management system. Its functionality is exemplified for the application scenario of a patient suffering from congestive heart failure. Several vital signs sensors provide data for the decision support system, and a number of flexible communication channels are available for interaction with patient or caregiver. PICS is a standards-based, open and flexible system enabling personalized decision support. Further development will include the implementation of components on small computers and sensor nodes.

  5. Imagery analysis and the need for standards

    NASA Astrophysics Data System (ADS)

    Grant, Barbara G.

    2014-09-01

    While efforts within the optics community focus on the development of high-quality systems and data products, comparatively little attention is paid to their use. Our standards for verification and validation are high; but in some user domains, standards are either lax or do not exist at all. In forensic imagery analysis, for example, standards exist to judge image quality, but do not exist to judge the quality of an analysis. In litigation, a high quality analysis is by default the one performed by the victorious attorney's expert. This paper argues for the need to extend quality standards into the domain of imagery analysis, which is expected to increase in national visibility and significance with the increasing deployment of unmanned aerial vehicle—UAV, or "drone"—sensors in the continental U. S.. It argues that like a good radiometric calibration, made as independent of the calibrated instrument as possible, a good analysis should be subject to standards the most basic of which is the separation of issues of scientific fact from analysis results.

  6. RELIABILITY OF CONFOCAL MICROSCOPY SPECTRAL IMAGING SYSTEMS: USE OF MULTISPECTRAL BEADS

    EPA Science Inventory

    Background: There is a need for a standardized, impartial calibration, and validation protocol on confocal spectral imaging (CSI) microscope systems. To achieve this goal, it is necessary to have testing tools to provide a reproducible way to evaluate instrument performance. ...

  7. An Approach to Semantic Interoperability for Improved Capability Exchanges in Federations of Systems

    ERIC Educational Resources Information Center

    Moschoglou, Georgios

    2013-01-01

    This study seeks an affirmative answer to the question whether a knowledge-based approach to system of systems interoperation using semantic web standards and technologies can provide the centralized control of the capability for exchanging data and services lacking in a federation of systems. Given the need to collect and share real-time…

  8. Soil carbon accounting and assumptions for forestry and forest-related land use change

    Treesearch

    Linda S. Heath; James E. Smith

    2000-01-01

    Comprehensive, large-scale carbon accounting systems are needed as nations agree to work toward reducing their greenhouse gas (GHG) emissions. However, adopting a standard accounting system is difficult because multiple science and policy uses for such a system help fuel the debate about the nature of an appropriate system. Accounting systems must address all major...

  9. Towards G2G: Systems of Technology Database Systems

    NASA Technical Reports Server (NTRS)

    Maluf, David A.; Bell, David

    2005-01-01

    We present an approach and methodology for developing Government-to-Government (G2G) Systems of Technology Database Systems. G2G will deliver technologies for distributed and remote integration of technology data for internal use in analysis and planning as well as for external communications. G2G enables NASA managers, engineers, operational teams and information systems to "compose" technology roadmaps and plans by selecting, combining, extending, specializing and modifying components of technology database systems. G2G will interoperate information and knowledge that is distributed across organizational entities involved that is ideal for NASA future Exploration Enterprise. Key contributions of the G2G system will include the creation of an integrated approach to sustain effective management of technology investments that supports the ability of various technology database systems to be independently managed. The integration technology will comply with emerging open standards. Applications can thus be customized for local needs while enabling an integrated management of technology approach that serves the global needs of NASA. The G2G capabilities will use NASA s breakthrough in database "composition" and integration technology, will use and advance emerging open standards, and will use commercial information technologies to enable effective System of Technology Database systems.

  10. [Animal welfare standards in ecological animal husbandry and the possibilities of their regulation].

    PubMed

    Sundrum, A

    1993-02-01

    There is an ethic claim to an increasing consideration of animal welfare in agricultural husbandry. To put this in practise requires the consumer's willingness to pay higher prices for food, produced according to animal's needs. A growing number of consumers is willing to do that. For the higher price the consumer expects a product-security, which guarantees processing standards by transparent criteria and inspection. Guidelines in organic agriculture regulate standards of animal welfare and environmental friendly production. Standards of animal welfare are far beyond those in protection of animals legislation. Nevertheless, they don't allow a general judgement about animal welfare in husbandry systems on organic ruled farms. A practicable and conclusive valuation-concept is necessary. It is referred to the animal needs index as a concept for valuation, which is already tested in practice.

  11. Educational Approaches When Implementing the Next Generation Science Standards

    NASA Astrophysics Data System (ADS)

    Dwyer, Brian

    This paper overviews the history of science education from the launch of Sputnik through reform movements and associated legislation to the most recent Next Generation Science Standards (NGSS). The paper also considers stakeholder groups that would need to be involved if NGSS is to be implemented properly, including teachers, parents and unions. Each group holds a responsibility within a school system that needs to be addressed from a practical standpoint to increase the likelihood of the effective adoption of the Next Generation Science Standards. This paper provides background and program information about the Next Generation Science Standards (NGSS). It also considers the educational, philosophical, and instructional approach known as inquiry which is strongly advocated by NGSS and explores where and how other well-studied instructional approaches might have a place within an inquiry-based classroom.

  12. IEEE Std 730 Software Quality Assurance: Supporting CMMI-DEV v1.3, Product and Process Quality Assurance

    DTIC Science & Technology

    2011-05-27

    frameworks 4 CMMI-DEV IEEE / ISO / IEC 15288 / 12207 Quality Assurance ©2011 Walz IEEE Life Cycle Processes & Artifacts • Systems Life Cycle Processes...TAG to ISO TC 176 Quality Management • Quality: ASQ, work experience • Software: three books, consulting, work experience • Systems: Telecom & DoD...and IEEE 730 SQA need to align. The P730 IEEE standards working group has expanded the scope of the SQA process standard to align with IS 12207

  13. Concept Study on a Flexible Standard Bus for Small Scientific Satellites

    NASA Astrophysics Data System (ADS)

    Fukuda, Seisuke; Sawai, Shujiro; Sakai, Shin-Ichiro; Saito, Hirobumi; Tohma, Takayuki; Takahashi, Junko; Toriumi, Tsuyoshi; Kitade, Kenji

    In this paper, a new standard bus system for a series of small scientific satellites in the Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA) is described. Since each mission proposed for the series has a wide variety of requirements, a lot of efforts are needed to enhance flexibility of the standard bus. Some concepts from different viewpoints are proposed. First, standardization layers concerning satellite configuration, instruments, interfaces, and design methods are defined respectively. Methods of product platform engineering, which classify specifications of the bus system into a core platform, alternative variants, and selectable variants, are also investigated in order to realize a semi-custom-made bus. Furthermore, a tradeoff between integration and modularization architecture is fully considered.

  14. Data-Acquisition System With Remotely Adjustable Amplifiers

    NASA Technical Reports Server (NTRS)

    Nurge, Mark A.; Larson, William E.; Hallberg, Carl G.; Thayer, Steven W.; Ake, Jeffrey C.; Gleman, Stuart M.; Thompson, David L.; Medelius, Pedro J.; Crawford, Wayne A.; Vangilder, Richard M.; hide

    1994-01-01

    Improved data-acquisition system has both centralized and decentralized characteristics developed. Provides infrastructure for automation and standardization of operation, maintenance, calibration, and adjustment of many transducers. Increases efficiency by reducing need for diminishing work force of highly trained technicians to perform routine tasks. Large industrial and academic laboratory facilities benefit from systems like this one.

  15. 76 FR 76772 - Submission for Review: Standard Form 1153: Claim for Unpaid Compensation of Deceased Civilian...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-08

    ... and request for comments. SUMMARY: Merit System Audit and Compliance, Office of Personnel Management... Management, Merit System Audit and Compliance, Room 6484, 1900 E Street NW., Washington, DC 20415, or sent... instructions if more room is needed to list designated beneficiaries. Analysis Agency: Merit System Audit and...

  16. An Integrated Social, Economic, and Ecologic Conceptual (ISEEC) framework for considering rangeland sustainability

    Treesearch

    William E. Fox; Daniel W. McCollum; John E. Mitchell; Louis E. Swanson; Urs P. Kreuter; John A. Tanaka; Gary R. Evans; H. Theodore Heintz; Robert P. Breckenridge; Paul H. Geissler

    2009-01-01

    Currently, there is no standard method to assess the complex systems in rangeland ecosystems. Decision makers need baselines to create a common language of current rangeland conditions and standards for continued rangeland assessment. The Sustainable Rangeland Roundtable (SRR), a group of private and public organizations and agencies, has created a forum to discuss...

  17. Standardization of quantum key distribution and the ETSI standardization initiative ISG-QKD

    NASA Astrophysics Data System (ADS)

    Länger, Thomas; Lenhart, Gaby

    2009-05-01

    In recent years, quantum key distribution (QKD) has been the object of intensive research activities and of rapid progress, and it is now developing into a competitive industry with commercial products. Once QKD systems are transferred from the controlled environment of physical laboratories into a real-world environment for practical use, a number of practical security, compatibility and connectivity issues need to be resolved. In particular, comprehensive security evaluation and watertight security proofs need to be addressed to increase trust in QKD. System interoperability with existing infrastructures and applications as well as conformance with specific user requirements have to be assured. Finding common solutions to these problems involving all actors can provide an advantage for the commercialization of QKD as well as for further technological development. The ETSI industry specification group for QKD (ISG-QKD) offers a forum for creating such universally accepted standards and will promote significant leverage effects on coordination, cooperation and convergence in research, technical development and business application of QKD.

  18. Advancing nursing leadership: a model for program implementation and measurement.

    PubMed

    Omoike, Osei; Stratton, Karen M; Brooks, Beth A; Ohlson, Susan; Storfjell, Judy Lloyd

    2011-01-01

    Despite the abundant literature documenting the need for nurse management education and career development, only recently have professional standards been targeted for this group. Competency standards for nurse leaders repeatedly identify systems-level concepts including finance and budget, communication skills, strategic management, human resources management, change management, and computer technology skills. However, educational initiatives to meet these standards are still at the early stages and most nurse leaders continue to acquire knowledge and experience through "on-the-job" training. This article will illustrate the need for partnerships and collaboration between academia and hospitals to advance nursing leadership to the next century. In addition, a tool to measure the impact of a graduate certificate program in nursing administration on nurse leader competencies is presented. Overall, the certificate program has been successful in multiple ways; it has "graduated" almost 80 nurse leaders, improved participant competence in their role at the systems level, as well as providing an impetus for completion of a graduate degree post program.

  19. Leadership Practices Accelerate into High Speed

    ERIC Educational Resources Information Center

    Novak, Dori; Reilly, Marceta; Williams, Diana

    2010-01-01

    In fall 2006, the deputy superintendent of Howard County Schools in Maryland asked a small leadership team to rethink leadership support for central office leaders and to come up with an aligned three-point plan that would meet their unique needs. The leadership support system needed to take into account: (1) Leadership standards and indicators of…

  20. The Need for Consumer Education among Indians.

    ERIC Educational Resources Information Center

    Deloria, P. S.

    Since the standard approach to consumer education is based upon the economic situation of the average American and since the degree of American Indian reservation poverty is substantially greater than that of other groups, it is clear that there is a need for Indian oriented consumer education. Based upon a long established credit system.,…

  1. US Army Proposed Automatic Test Equipment Software Development and Support Facility.

    DTIC Science & Technology

    1982-10-29

    programs would be prepared as weapon and prime system operating software. The ATE Software Development and Support Facility will help prevent the TPS...ONE AS A STANDARD **Partially being Developed (2) UNDER DEVELOP- by Navy CSS Prgram MENT (3) NEEDS TAILOR- (5) NEEDS ING FOR ARMY DEVELOPMENT A- 2

  2. New systems for treatment of manure from confined animal production

    USDA-ARS?s Scientific Manuscript database

    New swine waste management systems developed in North Carolina to replace the anaerobic lagoons need to meet the strict performance standards of an environmentally superior technology (EST). These technologies must be able to substantially remove nutrients, heavy metals, emissions of ammonia, odors,...

  3. Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project: KDP-A for Phase 2 Minimum Operational Performance Standards

    NASA Technical Reports Server (NTRS)

    Grindle, Laurie; Hackenberg, Davis L.

    2016-01-01

    UAS Integration in the NAS Project has: a) Developed Technical Challenges that are crucial to UAS integration, aligned with NASA's Strategic Plan and Thrusts, and support FAA standards development. b) Demonstrated rigorous project management processes through the execution of previous phases. c) Defined Partnership Plans. d) Established path to KDP-C. Request approval of Technical Challenges, execution of partnerships and plans, and execution of near-term FY17 activities. There is an increasing need to fly UAS in the NAS to perform missions of vital importance to National Security and Defense, Emergency Management, and Science. There is also an emerging need to enable commercial applications such as cargo transport (e.g. FedEx). Unencumbered NAS Access for Civil/Commercial UAS. Provide research findings, utilizing simulation and flight tests, to support the development and validation of DAA and C2 technologies necessary for integrating Unmanned Aircraft Systems into the National Airspace System.

  4. A standard-driven approach for electronic submission to pharmaceutical regulatory authorities.

    PubMed

    Lin, Ching-Heng; Chou, Hsin-I; Yang, Ueng-Cheng

    2018-03-01

    Using standards is not only useful for data interchange during the process of a clinical trial, but also useful for analyzing data in a review process. Any step, which speeds up approval of new drugs, may benefit patients. As a result, adopting standards for regulatory submission becomes mandatory in some countries. However, preparing standard-compliant documents, such as annotated case report form (aCRF), needs a great deal of knowledge and experience. The process is complex and labor-intensive. Therefore, there is a need to use information technology to facilitate this process. Instead of standardizing data after the completion of a clinical trial, this study proposed a standard-driven approach. This approach was achieved by implementing a computer-assisted "standard-driven pipeline (SDP)" in an existing clinical data management system. SDP used CDISC standards to drive all processes of a clinical trial, such as the design, data acquisition, tabulation, etc. RESULTS: A completed phase I/II trial was used to prove the concept and to evaluate the effects of this approach. By using the CDISC-compliant question library, aCRFs were generated automatically when the eCRFs were completed. For comparison purpose, the data collection process was simulated and the collected data was transformed by the SDP. This new approach reduced the missing data fields from sixty-two to eight and the controlled term mismatch field reduced from eight to zero during data tabulation. This standard-driven approach accelerated CRF annotation and assured data tabulation integrity. The benefits of this approach include an improvement in the use of standards during the clinical trial and a reduction in missing and unexpected data during tabulation. The standard-driven approach is an advanced design idea that can be used for future clinical information system development. Copyright © 2018 Elsevier Inc. All rights reserved.

  5. Understanding the complexities of private standards in global agri-food chains as they impact developing countries.

    PubMed

    Henson, Spencer; Humphrey, John

    2010-01-01

    The increasing prevalence of private standards governing food safety, food quality and environmental and social impacts of agri-food systems has raised concerns about the effects on developing countries, as well as the governance of agri-food value chains more broadly. It is argued that current debates have been 'clouded' by a failure to recognise the diversity of private standards in terms of their institutional form, who develops and adopts these standards and why. In particular, there is a need to appreciate the close inter-relationships between public regulations and private standards and the continuing ways in which private standards evolve.

  6. Using ISO 25040 standard for evaluating electronic health record systems.

    PubMed

    Oliveira, Marília; Novaes, Magdala; Vasconcelos, Alexandre

    2013-01-01

    Quality of electronic health record systems (EHR-S) is one of the key points in the discussion about the safe use of this kind of system. It stimulates creation of technical standards and certifications in order to establish the minimum requirements expected for these systems. [1] In other side, EHR-S suppliers need to invest in evaluation of their products to provide systems according to these requirements. This work presents a proposal of use ISO 25040 standard, which focuses on the evaluation of software products, for define a model of evaluation of EHR-S in relation to Brazilian Certification for Electronic Health Record Systems - SBIS-CFM Certification. Proposal instantiates the process described in ISO 25040 standard using the set of requirements that is scope of the Brazilian certification. As first results, this research has produced an evaluation model and a scale for classify an EHR-S about its compliance level in relation to certification. This work in progress is part for the acquisition of the degree of master in Computer Science at the Federal University of Pernambuco.

  7. Telepathology: design of a modular system.

    PubMed

    Brauchli, K; Christen, H; Meyer, P; Haroske, G; Meyer, W; Kunze, K D; Otto, R; Oberholzer, M

    2000-01-01

    Although telepathology systems have been developed for more than a decade, they are still not a widespread tool for routine diagnostic applications. Lacking interoperability, software that is not satisfying user needs as well as high costs have been identified as reasons. In this paper we would like to demonstrate that with a clear separation of the tasks required for a telepathology application, telepathology systems can be built in a modular way, where many modules can be implemented using standard software components. With such a modular design, systems can be easily adapted to changing user needs and new technological developments and it is easier to integrate modular systems into existing environments.

  8. Knowledge representation and management enabling intelligent interoperability - principles and standards.

    PubMed

    Blobel, Bernd

    2013-01-01

    Based on the paradigm changes for health, health services and underlying technologies as well as the need for at best comprehensive and increasingly automated interoperability, the paper addresses the challenge of knowledge representation and management for medical decision support. After introducing related definitions, a system-theoretical, architecture-centric approach to decision support systems (DSSs) and appropriate ways for representing them using systems of ontologies is given. Finally, existing and emerging knowledge representation and management standards are presented. The paper focuses on the knowledge representation and management part of DSSs, excluding the reasoning part from consideration.

  9. Specifications for a Federal Information Processing Standard Data Dictionary System

    NASA Technical Reports Server (NTRS)

    Goldfine, A.

    1984-01-01

    The development of a software specification that Federal agencies may use in evaluating and selecting data dictionary systems (DDS) is discussed. To supply the flexibility needed by widely different applications and environments in the Federal Government, the Federal Information Processing Standard (FIPS) specifies a core DDS together with an optimal set of modules. The focus and status of the development project are described. Functional specifications for the FIPS DDS are examined for the dictionary, the dictionary schema, and the dictionary processing system. The DDS user interfaces and DDS software interfaces are discussed as well as dictionary administration.

  10. Standard metrics for a plug-and-play tracker

    NASA Astrophysics Data System (ADS)

    Antonisse, Jim; Young, Darrell

    2012-06-01

    The Motion Imagery Standards Board (MISB) has previously established a metadata "micro-architecture" for standards-based tracking. The intent of this work is to facilitate both the collaborative development of competent tracking systems, and the potentially distributed and dispersed execution of tracker system components in real-world execution environments. The approach standardizes a set of five quasi-sequential modules in image-based tracking. However, in order to make the plug-and-play architecture truly useful we need metrics associated with each module (so that, for instance, a researcher who "plugs in" a new component can ascertain whether he/she did better or worse with the component). This paper proposes the choice of a new, unifying set of metrics based on an informationtheoretic approach to tracking, which the MISB is nominating as DoD/IC/NATO standards.

  11. A data types profile suitable for use with ISO EN 13606.

    PubMed

    Sun, Shanghua; Austin, Tony; Kalra, Dipak

    2012-12-01

    ISO EN 13606 is a five part International Standard specifying how Electronic Healthcare Record (EHR) information should be communicated between different EHR systems and repositories. Part 1 of the standard defines an information model for representing the EHR information itself, including the representation of types of data value. A later International Standard, ISO 21090:2010, defines a comprehensive set of models for data types needed by all health IT systems. This latter standard is vast, and duplicates some of the functions already handled by ISO EN 13606 part 1. A profile (sub-set) of ISO 21090 would therefore be expected to provide EHR system vendors with a more specially tailored set of data types to implement and avoid the risk of providing more than one modelling option for representing the information properties. This paper describes the process and design decisions made for developing a data types profile for EHR interoperability.

  12. Public reporting needed to improve the health of Tennesseans.

    PubMed

    Bailey, James E; Gibson, Deborah

    2005-11-01

    Tennessee providers are recognizing an urgent need for a new and improved model of healthcare, characterized by transparent accountability to consumers. Meaningful health system improvements will require broad public disclosure of healthcare performance data at the hospital, clinic and community levels using nationally recognized standards. All Tennessee communities need a routine community health report card, to help their citizens to work together toward their most important health goals.

  13. Heterogeneous but “Standard” Coding Systems for Adverse Events: Issues in Achieving Interoperability between Apples and Oranges

    PubMed Central

    Richesson, Rachel L.; Fung, Kin Wah; Krischer, Jeffrey P.

    2008-01-01

    Monitoring adverse events (AEs) is an important part of clinical research and a crucial target for data standards. The representation of adverse events themselves requires the use of controlled vocabularies with thousands of needed clinical concepts. Several data standards for adverse events currently exist, each with a strong user base. The structure and features of these current adverse event data standards (including terminologies and classifications) are different, so comparisons and evaluations are not straightforward, nor are strategies for their harmonization. Three different data standards - the Medical Dictionary for Regulatory Activities (MedDRA) and the Systematized Nomenclature of Medicine Clinical Terms (SNOMED CT) terminologies, and Common Terminology Criteria for Adverse Events (CTCAE) classification - are explored as candidate representations for AEs. This paper describes the structural features of each coding system, their content and relationship to the Unified Medical Language System (UMLS), and unsettled issues for future interoperability of these standards. PMID:18406213

  14. Critical features of an auditable management system for an ISO 9000-compatible occupational health and safety standard.

    PubMed

    Levine, S; Dyjack, D T

    1997-04-01

    An International Organization for Standardization (ISO) 9001: 1994-harmonized occupational health and safety (OHS) management system has been written at the University of Michigan, and reviewed, revised, and accepted under the direction of the American Industrial Hygiene Association (AIHA) Occupational Health and Safety Management Systems (OHSMS) Task Force and the Board of Directors. This system is easily adaptable to the ISO 14001 format and to both OHS and environmental management system applications. As was the case with ISO 9001: 1994, this system is expected to be compatible with current production quality and OHS quality systems and standards, have forward compatibility for new applications, and forward flexibility, with new features added as needed. Since ISO 9001: 1987 and 9001: 1994 have been applied worldwide, the incorporation of harmonized OHS and environmental management system components should be acceptable to business units already performing first-party (self-) auditing, and second-party (contract qualification) auditing. This article explains the basis of this OHS management system, its relationship to ISO 9001 and 14001 standards, the philosophy and methodology of an ISO-harmonized system audit, the relationship of these systems to traditional OHS audit systems, and the authors' vision of the future for application of such systems.

  15. Performance Evaluation and Benchmarking of Intelligent Systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Madhavan, Raj; Messina, Elena; Tunstel, Edward

    To design and develop capable, dependable, and affordable intelligent systems, their performance must be measurable. Scientific methodologies for standardization and benchmarking are crucial for quantitatively evaluating the performance of emerging robotic and intelligent systems technologies. There is currently no accepted standard for quantitatively measuring the performance of these systems against user-defined requirements; and furthermore, there is no consensus on what objective evaluation procedures need to be followed to understand the performance of these systems. The lack of reproducible and repeatable test methods has precluded researchers working towards a common goal from exchanging and communicating results, inter-comparing system performance, and leveragingmore » previous work that could otherwise avoid duplication and expedite technology transfer. Currently, this lack of cohesion in the community hinders progress in many domains, such as manufacturing, service, healthcare, and security. By providing the research community with access to standardized tools, reference data sets, and open source libraries of solutions, researchers and consumers will be able to evaluate the cost and benefits associated with intelligent systems and associated technologies. In this vein, the edited book volume addresses performance evaluation and metrics for intelligent systems, in general, while emphasizing the need and solutions for standardized methods. To the knowledge of the editors, there is not a single book on the market that is solely dedicated to the subject of performance evaluation and benchmarking of intelligent systems. Even books that address this topic do so only marginally or are out of date. The research work presented in this volume fills this void by drawing from the experiences and insights of experts gained both through theoretical development and practical implementation of intelligent systems in a variety of diverse application domains. The book presents a detailed and coherent picture of state-of-the-art, recent developments, and further research areas in intelligent systems.« less

  16. A Functional Classification of Occupations.

    ERIC Educational Resources Information Center

    McKinlay, Donald Bruce

    The need for more and better manpower information is hampered by the lack of adequate occupational data classification systems. The diversity of interests in occupations probably accounts for the absence of consensus regarding either the general outlines or the specific details of a standardized occupational classification system which would…

  17. Racial differences in the mental health needs and service utilization of youth in the juvenile justice system.

    PubMed

    Rawal, Purva; Romansky, Jill; Jenuwine, Michael; Lyons, John S

    2004-01-01

    Mental health placement rates by the juvenile justice system differ by race. However, it is unknown whether mental health needs differ by race. This study attempted to investigate potential differences in mental health needs and service utilization among Caucasian, African American, and Hispanic juvenile justice involved youth. A stratified random sample of 473 youth petitioned, adjudicated, and incarcerated from 1995-1996 was examined using a standard chart review protocol and the Childhood Severity of Psychiatric Illness measure for mental health needs. Significant and unique mental health needs were demonstrated for all racial groups. African American youth demonstrated the greatest level of needs. Minority status indicated significantly lower rates of mental health service utilization. Minority youth in the juvenile justice system are most at risk for underserved mental health needs. Based on the current data, it can be inferred that the first contact with the state's child and adolescent serving system, which includes the juvenile justice and mental health sectors, appears to be through the juvenile justice sector for many minority youth with delinquency problems.

  18. Competency-based medical education and continuing professional development: A conceptualization for change.

    PubMed

    Lockyer, Jocelyn; Bursey, Ford; Richardson, Denyse; Frank, Jason R; Snell, Linda; Campbell, Craig

    2017-06-01

    Competency-based medical education (CBME) is as important in continuing professional development (CPD) as at any other stage of a physician's career. Principles of CBME have the potential to revolutionize CPD. Transitioning to CBME-based CPD will require a cultural change to gain commitment from physicians, their employers and institutions, CPD providers, professional organizations, and medical regulators. It will require learning to be aligned with professional and workplace standards. Practitioners will need to develop the expertise to systematically examine their own clinical performance data, identify performance improvement opportunities and possibilities, and develop a plan to address areas of concern. Health care facilities and systems will need to produce data on a regular basis and to develop and train CPD educators who can work with physician groups. Stakeholders, such as medical regulatory authorities who are responsible for licensing physicians and other standard-setting bodies that credential and develop maintenance-of-certification systems, will need to change their paradigm of competency enhancement through CPD.

  19. Informatics in clinical research in oncology: current state, challenges, and a future perspective.

    PubMed

    Chahal, Amar P S

    2011-01-01

    The informatics landscape of clinical trials in oncology has changed significantly in the last 10 years. The current state of the infrastructure for clinical trial management, execution, and data management is reviewed. The systems, their functionality, the users, and the standards available to researchers are discussed from the perspective of the oncologist-researcher. Challenges in complexity and in the processing of information are outlined. These challenges include the lack of communication and information-interchange between systems, the lack of simplified standards, and the lack of implementation and adherence to the standards that are available. The clinical toxicology criteria from the National Cancer Institute (CTCAE) are cited as a successful standard in oncology, and HTTP on the Internet is referenced for its simplicity. Differences in the management of information standards between industries are discussed. Possible future advances in oncology clinical research informatics are addressed. These advances include strategic policy review of standards and the implementation of actions to make standards free, ubiquitous, simple, and easily interpretable; the need to change from a local data-capture- or transaction-driven model to a large-scale data-interpretation model that provides higher value to the oncologist and the patient; and the need for information technology investment in a readily available digital educational model for clinical research in oncology that is customizable for individual studies. These new approaches, with changes in information delivery to mobile platforms, will set the stage for the next decade in clinical research informatics.

  20. A Standardized Relative Resource Cost Model for Medical Care: Application to Cancer Control Programs

    PubMed Central

    2013-01-01

    Medicare data represent 75% of aged and permanently disabled Medicare beneficiaries enrolled in the fee-for-service (FFS) indemnity option, but the data omit 25% of beneficiaries enrolled in Medicare Advantage health maintenance organizations (HMOs). Little research has examined how longitudinal patterns of utilization differ between HMOs and FFS. The Burden of Cancer Study developed and implemented an algorithm to assign standardized relative costs to HMO and Medicare FFS data consistently across time and place. Medicare uses 15 payment systems to reimburse FFS providers for covered services. The standardized relative resource cost algorithm (SRRCA) adapts these various payment systems to utilization data. We describe the rationale for modifications to the Medicare payment systems and discuss the implications of these modifications. We applied the SRRCA to data from four HMO sites and the linked Surveillance, Epidemiology, and End Results–Medicare data. Some modifications to Medicare payment systems were required, because data elements needed to categorize utilization were missing from both data sources. For example, data were not available to create episodes for home health services received, so we assigned costs per visit based on visit type (nurse, therapist, and aide). For inpatient utilization, we modified Medicare’s payment algorithm by changing it from a flat payment per diagnosis-related group to daily rates for diagnosis-related groups to differentiate shorter versus longer stays. The SRRCA can be used in multiple managed care plans and across multiple FFS delivery systems within the United States to create consistent relative cost data for economic analyses. Prior to international use of the SRRCA, data need to be standardized. PMID:23962514

  1. The NICU Lighted Environment

    PubMed Central

    Rea, Mark S.; Figueiro, Mariana G.

    2016-01-01

    Lighting technologies are rapidly evolving, creating many opportunities for good lighting within the NICU. With the widespread adoption of advanced solid-state lighting technologies, lighting no longer needs to be static. Rather, lighting systems can be more easily adjusted to the different and changing visual and non-visual needs of the professional staff, infants and family members throughout the 24-hour day. This paper provides a conceptual framework for defining good lighting in the NICU, recognizing the needs of various constituent groups, each with very different needs from the lighting. Several other papers on the topic of lighting for various constituent groups at different times of the day in the NICU are summarized. Attention is given specifically to the Recommended Standards for Newborn ICU Design, a consensus standard developed by a wide range of experts, to help the reader translate this conceptual framework to practice. PMID:28824339

  2. [Research and implementation of the TLS network transport security technology based on DICOM standard].

    PubMed

    Lu, Xiaoqi; Wang, Lei; Zhao, Jianfeng

    2012-02-01

    With the development of medical information, Picture Archiving and Communications System (PACS), Hospital Information System/Radiology Information System(HIS/RIS) and other medical information management system become popular and developed, and interoperability between these systems becomes more frequent. So, these enclosed systems will be open and regionalized by means of network, and this is inevitable. If the trend becomes true, the security of information transmission may be the first problem to be solved. Based on the need for network security, we investigated the Digital Imaging and Communications in Medicine (DICOM) Standard and Transport Layer Security (TLS) Protocol, and implemented the TLS transmission of the DICOM medical information with OpenSSL toolkit and DCMTK toolkit.

  3. Information system needs in health promotion: a case study of the Safe Community programme using requirements engineering methods.

    PubMed

    Timpka, Toomas; Olvander, Christina; Hallberg, Niklas

    2008-09-01

    The international Safe Community programme was used as the setting for a case study to explore the need for information system support in health promotion programmes. The 14 Safe Communities active in Sweden during 2002 were invited to participate and 13 accepted. A questionnaire on computer usage and a critical incident technique instrument were distributed. Sharing of management information, creating social capital for safety promotion, and injury data recording were found to be key areas that need to be further supported by computer-based information systems. Most respondents reported having access to a personal computer workstation with standard office software. Interest in using more advanced computer applications was low, and there was considerable need for technical user support. Areas where information systems can be used to make health promotion practice more efficient were identified, and patterns of computers usage were described.

  4. Using manufacturing message specification for monitor and control at Venus

    NASA Technical Reports Server (NTRS)

    Heuser, W. Randy; Chen, Richard L.; Stockett, Michael H.

    1993-01-01

    The flexibility and robustness of a monitor and control (M&C) system are a direct result of the underlying interprocessor communications architecture. A new architecture for M&C at the Deep Space Communications Complexes (DSCC's) has been developed based on the Manufacturing Message Specification (MMS) process control standard of the Open System Interconnection (OSI) suite of protocols. This architecture has been tested both in a laboratory environment and under operational conditions at the Deep Space Network (DSN) experimental Venus station (DSS-13). The Venus experience in the application of OSI standards to support M&C has been extremely successful. MMS meets the functional needs of the station and provides a level of flexibility and responsiveness previously unknown in that environment. The architecture is robust enough to meet current operational needs and flexible enough to provide a migration path for new subsystems. This paper will describe the architecture of the Venus M&C system, discuss how MMS was used and the requirements this imposed on other parts of the system, and provide results from systems and operational testing at the Venus site.

  5. The NTCIP guide : updated version 3

    DOT National Transportation Integrated Search

    2002-10-01

    The transportation community has long needed transportation systems that could be built using devices and components that were interchangeable and interoperable. The National Transportation Communications for ITS Protocol (NTCIP) family of standards ...

  6. Effective Learning Systems through Blended Teaching Modules in Adult Secondary Education Systems in Developing Nations: Need for Partnership

    ERIC Educational Resources Information Center

    Ike, Eucharia; Okechukwu, Ibeh Bartholomew

    2015-01-01

    We investigated methodological lessons in randomly selected adult secondary schools to construct a case for international partnership while examining education development in Nigeria. Standard database and web-based searches were conducted for publications between 1985 and 2012 on learning systems. This paper presents its absence and finds a heavy…

  7. Teacher Insight: The Implementation of the Common Core State Standards in California School Districts

    ERIC Educational Resources Information Center

    Martin, Catherine Anne

    2017-01-01

    This study, "Teacher Insight: The Implementation of the Common Core State Standards in California School Districts" was designed to glean teacher voice on the large-scale reform. With a need for a global workforce in a 21st century society the existing education system is undergoing a tremendous change in order to prepare students for…

  8. Quality assurance: The 10-Group Classification System (Robson classification), induction of labor, and cesarean delivery.

    PubMed

    Robson, Michael; Murphy, Martina; Byrne, Fionnuala

    2015-10-01

    Quality assurance in labor and delivery is needed. The method must be simple and consistent, and be of universal value. It needs to be clinically relevant, robust, and prospective, and must incorporate epidemiological variables. The 10-Group Classification System (TGCS) is a simple method providing a common starting point for further detailed analysis within which all perinatal events and outcomes can be measured and compared. The system is demonstrated in the present paper using data for 2013 from the National Maternity Hospital in Dublin, Ireland. Interpretation of the classification can be easily taught. The standard table can provide much insight into the philosophy of care in the population of women studied and also provide information on data quality. With standardization of audit of events and outcomes, any differences in either sizes of groups, events or outcomes can be explained only by poor data collection, significant epidemiological variables, or differences in practice. In April 2015, WHO proposed that the TGCS (also known as the Robson classification) is used as a global standard for assessing, monitoring, and comparing cesarean delivery rates within and between healthcare facilities. Copyright © 2015. Published by Elsevier Ireland Ltd.

  9. Implementation of ISO 10110 optics drawing standards for the National Ignition Facility

    NASA Astrophysics Data System (ADS)

    Wang, David Y.; English, R. Edward, Jr.; Aikens, David M.

    1999-11-01

    The National Ignition Facility (NIF) project elected to implement ISO 10110 standard for the specifications of NIF optics drawings in 1996. More than 7,000 NIF large optics and 20,000 NIF small optics will be manufactured based on ISO 10110 indications. ISO 10110 standard meets many of the needs of the NIF optics specifications. It allows the optical engineer to quantify and clearly communicate the desired optical specifications. While no single drawing standard specifies all the requirements of high energy laser system, a combination of ISO 10110 standard with detailed notes make it possible to apply international drawing standards to the NIF laser system. This paper will briefly describe LLNL's interpretation and implementation of the ISO 10110 drawing standard, present some examples of NIF optics drawings, and discuss pros and cons of the indications from the perspective of this application. Emphasis will be given to the surface imperfection specifications, known as 5/, for the NIF optics.

  10. MO-D-218-01: Overview of Methodology and Standards (QIBA, IEC, AIUM and AAPM).

    PubMed

    Carson, P

    2012-06-01

    Ultrasound system standards and professional guidelines can facilitate efficient provision of medical physics services and growth of ultrasound imaging if the documents are well designed and are utilized. We too often develop our own phantoms and procedures and never converge to obtain a critical mass of data on system performance and value of such services. Standards can also produce unnecessary costs and limit innovation if not carefully developed, reviewed, and changed as needed. There are quite a few new initiatives that, if followed vigorously, could improve medical ultrasound and medical physicists' contributions thereto. This talk is to explain many of the existing standards and recommendations for ultrasound system quality control, performance evaluation, and safety, as well as current and suggested efforts in these areas. The primary standards body for medical ultrasound systems is now the International Electrotechnical Commission (IEC). Uniformity across the world is helpful to all if the documents are reasonably current. There still is a role for traditional bodies such as the AAPM with its valuable report series and the American Inst. of Ultras. in Med. (AIUM) with its own standards and reports and its joint work with the Medical Imaging Technology Alliance (MITA). All three, with strong involvement of FDA scientists and with some efforts from the Acoustical Society of America have historically provided the main standards affecting medical physicists. Now that the lengthy IEC process is moving more smoothly, our national bodies still can provide new developments and drafts that can be offered as needed for international standardization. The ACR in particular can provide meaningful incentives through ultrasound service accreditation. Without any regulatory or strong consumer push, reports and standards on ultrasound system performance have received only modest use in the USA. A consistent consumer or accreditation push might be justified now. A series of three standards on performance evaluation is well on its way to covering pulse echo ultrasound well, with IEC 61319-1 on spatial measurements, IEC 61319-2 on depth of penetration and local dynamic range and one draft and one Technical Specification 62558 on small void imaging. A new effort has just been initiated to help drive more and better use of quantitative ultrasound imaging in human and surrogate studies and in clinical use. A shear wave speed ultrasound technical committee will carry out this effort in the Quantitative Imaging Biomarkers Alliance (QIBA) that is managed by the RSNA. 1. Understand the coverage of the two current and third planned IEC medical ultrasound performance evaluation standards that could form a basis for stable performance evaluation tests. 2. Understand the coverage of the Current AIUM and ACR QC documents and the drafting and support efforts in the IEC. 3. Understand the need for and partial availability of simplified software and instructions to improve and facilitate performance of these tests? 4. Understand how standards development can lead to improved understanding and performance of medical ultrasound imaging as is anticipated for the new QIBA effort. © 2012 American Association of Physicists in Medicine.

  11. Process Improvement in a Radically Changing Organization

    NASA Technical Reports Server (NTRS)

    Varga, Denise M.; Wilson, Barbara M.

    2007-01-01

    This presentation describes how the NASA Glenn Research Center planned and implemented a process improvement effort in response to a radically changing environment. As a result of a presidential decision to redefine the Agency's mission, many ongoing projects were canceled and future workload would be awarded based on relevance to the Exploration Initiative. NASA imposed a new Procedural Requirements standard on all future software development, and the Center needed to redesign its processes from CMM Level 2 objectives to meet the new standard and position itself for CMMI. The intended audience for this presentation is systems/software developers and managers in a large, research-oriented organization that may need to respond to imposed standards while also pursuing CMMI Maturity Level goals. A set of internally developed tools will be presented, including an overall Process Improvement Action Item database, a formal inspection/peer review tool, metrics collection spreadsheet, and other related technologies. The Center also found a need to charter Technical Working Groups (TWGs) to address particular Process Areas. In addition, a Marketing TWG was needed to communicate the process changes to the development community, including an innovative web site portal.

  12. Strategies for success in creating an effective multihospital health-system pharmacy and therapeutics committee.

    PubMed

    Leonard, Mandy C; Thyagarajan, Rema; Wilson, Amy J; Sekeres, Mikkael A

    2018-04-01

    Lessons learned from the creation of a multihospital health-system formulary management and pharmacy and therapeutics (P&T) committee are described. A health system can create and implement a multihospital system formulary and P&T committee to provide evidence-based medications for ideal healthcare. The formulary and P&T process should be multidisciplinary and include adequate representation from system hospitals. The aim of a system formulary and P&T committee is standardization; however, the system should allow flexibility for differences. Key points for a successful multihospital system formulary and P&T committee are patience, collaboration, resilience, and communication. When establishing a multihospital health-system formulary and P&T committee, the needs of individual hospitals are crucial. A designated member of the pharmacy department needs to centrally coordinate and manage formulary requests, medication reviews and monographs, meeting agendas and minutes, and a summary of decisions for implementation. It is imperative to create a timeline for formulary reviews to set expectations, as well as a process for formulary appeals. Collaboration across the various hospitals is critical for successful formulary standardization. When implementing a health-system P&T committee or standardizing a formulary system, it is important to be patient and give local sites time to make practice changes. Evidence-based data and rationale must be provided to all sites to support formulary changes. Finally, there must be multidisciplinary collaboration. There are several options for formulary structures and P&T committees in a health system. Potential strengths and barriers should be evaluated before selecting a formulary management process. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  13. [Law Enforcement Standards of Decency and Fairness].

    ERIC Educational Resources Information Center

    Saxbe, William B.

    Effective policemen need to have as much knowledge as possible about society; they need to be fair, like the criminal justice system they represent. Society cannot be protected unless there is full accordance with the law. Questions of concern are whether the poor man or the black man are receiving the same treatment as the rich or influential…

  14. Constructing Uniformity: the Standardization of International Electromagnetic Measures, 1860-1912

    NASA Astrophysics Data System (ADS)

    Lagerstrom, Larry Randles

    Metrology gained much attention from electrical scientists and practitioners in the nineteenth and early twentieth centuries. Spurred by the expanding telegraph industries, they considered the construction and acceptance of a universal system of electromagnetic measures essential for the growth of science and technology. The task was not easy. Scientists and practitioners, having different concerns and needs, often found themselves at odds. National rivalries further obstructed the attainment of uniform measures. Under the auspices of a series of international electrical congresses and conferences between 1881 and 1908, the systembuilders succeeded in establishing an international system of practical electrical units and standards--the ohm, volt, ampere, coulomb, farad, joule, and watt--based on the centimeter-gram-second (CGS) system of measures. They had less success, however, with practical magnetic units. They had designed the system of electrical units to meet the needs of telegraphy. But the rise of the technologies of electrical power in the late nineteenth century made it difficult to define magnetic units that were both practical for the new technologies and coherent with the existing system of units. The international congress, as an institution, also gave them trouble. It lacked authority and stability and, in some cases, hindered the development of the system of units. More credit for the success of the systembuilders must go, paradoxically, to the national physical laboratories that arose in Germany, France, Great Britain, and the United States circa 1900. They enabled the standardization of international electromagnetic measures by narrowing the community of systembuilders to a small circle of elite experts. This historical process illustrates important aspects of the ways and means of standardization, of the technical and social construction of uniformity.

  15. caCORE version 3: Implementation of a model driven, service-oriented architecture for semantic interoperability.

    PubMed

    Komatsoulis, George A; Warzel, Denise B; Hartel, Francis W; Shanbhag, Krishnakant; Chilukuri, Ram; Fragoso, Gilberto; Coronado, Sherri de; Reeves, Dianne M; Hadfield, Jillaine B; Ludet, Christophe; Covitz, Peter A

    2008-02-01

    One of the requirements for a federated information system is interoperability, the ability of one computer system to access and use the resources of another system. This feature is particularly important in biomedical research systems, which need to coordinate a variety of disparate types of data. In order to meet this need, the National Cancer Institute Center for Bioinformatics (NCICB) has created the cancer Common Ontologic Representation Environment (caCORE), an interoperability infrastructure based on Model Driven Architecture. The caCORE infrastructure provides a mechanism to create interoperable biomedical information systems. Systems built using the caCORE paradigm address both aspects of interoperability: the ability to access data (syntactic interoperability) and understand the data once retrieved (semantic interoperability). This infrastructure consists of an integrated set of three major components: a controlled terminology service (Enterprise Vocabulary Services), a standards-based metadata repository (the cancer Data Standards Repository) and an information system with an Application Programming Interface (API) based on Domain Model Driven Architecture. This infrastructure is being leveraged to create a Semantic Service-Oriented Architecture (SSOA) for cancer research by the National Cancer Institute's cancer Biomedical Informatics Grid (caBIG).

  16. caCORE version 3: Implementation of a model driven, service-oriented architecture for semantic interoperability

    PubMed Central

    Komatsoulis, George A.; Warzel, Denise B.; Hartel, Frank W.; Shanbhag, Krishnakant; Chilukuri, Ram; Fragoso, Gilberto; de Coronado, Sherri; Reeves, Dianne M.; Hadfield, Jillaine B.; Ludet, Christophe; Covitz, Peter A.

    2008-01-01

    One of the requirements for a federated information system is interoperability, the ability of one computer system to access and use the resources of another system. This feature is particularly important in biomedical research systems, which need to coordinate a variety of disparate types of data. In order to meet this need, the National Cancer Institute Center for Bioinformatics (NCICB) has created the cancer Common Ontologic Representation Environment (caCORE), an interoperability infrastructure based on Model Driven Architecture. The caCORE infrastructure provides a mechanism to create interoperable biomedical information systems. Systems built using the caCORE paradigm address both aspects of interoperability: the ability to access data (syntactic interoperability) and understand the data once retrieved (semantic interoperability). This infrastructure consists of an integrated set of three major components: a controlled terminology service (Enterprise Vocabulary Services), a standards-based metadata repository (the cancer Data Standards Repository) and an information system with an Application Programming Interface (API) based on Domain Model Driven Architecture. This infrastructure is being leveraged to create a Semantic Service Oriented Architecture (SSOA) for cancer research by the National Cancer Institute’s cancer Biomedical Informatics Grid (caBIG™). PMID:17512259

  17. Family impact of assistive technology scale: development of a measurement scale for parents of children with complex communication needs.

    PubMed

    Delarosa, Elizabeth; Horner, Stephanie; Eisenberg, Casey; Ball, Laura; Renzoni, Anne Marie; Ryan, Stephen E

    2012-09-01

    Young people use augmentative and alternative communication (AAC) systems to meet their everyday communication needs. However, the successful integration of an AAC system into a child's life requires strong commitment and continuous support from parents and other family members. This article describes the development and evaluation of the Family Impact of Assistive Technology Scale for AAC Systems - a parent-report questionnaire intended to detect the impact of AAC systems on the lives of children with complex communication needs and their families. The study involved 179 parents and clinical experts to test the content and face validities of the questionnaire, demonstrate its internal reliability and stability over time, and estimate its convergent construct validity when compared to a standardized measure of family impact.

  18. MHEG Based Distance Learning System on Information Superhighway.

    ERIC Educational Resources Information Center

    Lee, SeiHoon; Yoon, KyungSeob; Wang, ChangJong

    As the need for distance education grows, requirements for the development of high-speed network-based real-time distance learning systems increases. MHEG-5 is the fifth part of the MHEG (Multimedia and Hypermedia information coding Experts Group) standard, and it defines a final-form representation for application interchange. This paper…

  19. 25 CFR 900.54 - Should the property management system prescribe internal controls?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... organization's self-determination contract(s) until the property is declared excess to the needs of the... HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES CONTRACTS UNDER THE INDIAN SELF-DETERMINATION AND EDUCATION ASSISTANCE ACT Standards for Tribal or Tribal Organization Management Systems Property Management...

  20. 25 CFR 900.54 - Should the property management system prescribe internal controls?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... organization's self-determination contract(s) until the property is declared excess to the needs of the... HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES CONTRACTS UNDER THE INDIAN SELF-DETERMINATION AND EDUCATION ASSISTANCE ACT Standards for Tribal or Tribal Organization Management Systems Property Management...

  1. 25 CFR 900.54 - Should the property management system prescribe internal controls?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... organization's self-determination contract(s) until the property is declared excess to the needs of the... HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES CONTRACTS UNDER THE INDIAN SELF-DETERMINATION AND EDUCATION ASSISTANCE ACT Standards for Tribal or Tribal Organization Management Systems Property Management...

  2. Opening up Library Automation Software

    ERIC Educational Resources Information Center

    Breeding, Marshall

    2009-01-01

    Throughout the history of library automation, the author has seen a steady advancement toward more open systems. In the early days of library automation, when proprietary systems dominated, the need for standards was paramount since other means of inter-operability and data exchange weren't possible. Today's focus on Application Programming…

  3. Standards And Their Impact On Technology

    NASA Astrophysics Data System (ADS)

    Endelman, Lincoln L.

    1990-01-01

    The needs for standards and the processes to provide them are very complex. Standardization is dependent upon voluntary and nonvoluntary agreement among individuals, companies, various organizations, and countries around the world. The agreements on standards, which sometimes take five to ten years, are hindered by monetary considerations, relinquishment of patent rights, disagreement among nations on dimensions in metric or the English system, and professional jealousy among some individuals. Standards, Standards, Standards - what a boring and uninteresting topic. Why did I ever agree to speak to you about something that most people take for granted and don't even bother to pay much attention to until they encounter a situation where a nonstandard item creates a problem. Have any of you ever bought a roll of 35mm film for your foreign made camera and found out that it needs 32mm film? That could have happened to you in the late nineteenth or early twentieth century. Yes, we know that, you say, but that's not a problem anymore. Well, how about when you try to put a Beta cassette into your VCR that uses VHS cassettes? Have you tried to fit a Minolta lens onto a Nikon camera? But enough, you all have the idea. Standards were developed to make interchangeable components compatible with other equipment, no matter who made it or where it was made. Some companies and countries deliberately made things different to protect their inventions and profit by their uniqueness. More and more attempts are being made to reduce the international differences in technology and establish a common ground for trade and commerce. The European Common Market is in the process of eliminating many of the barriers to free exchange of goods, services, and even moving to a universal currency. This all sounds good for Europe, but what about the USA and the rest of the world. The United States has fought the change to the metric system for almost two hundred years. Our electrical system and the electrical systems of many parts of the world are not compatible. There are at least five video systems throughout the world. Standards have a direct impact upon almost every area of living in today's multi-complex world. Medicine, business, entertainment, science, education, travel, and especially manufacturing. Think about the American made automobile with the Japanese engine - everything is metric.

  4. Alternative methods to trench backfill.

    DOT National Transportation Integrated Search

    2005-04-30

    Conduit structures dealing with hydraulic drainage needs in the Louisiana highway system include pipe culverts, pipe arch culverts, storm drains, sewers, etc. Although the Louisiana Department of Transportation and Development (LADOTD) has standard s...

  5. An assessment of non-communicable diseases, diabetes, and related risk factors in the territory of American Samoa: a systems perspective.

    PubMed

    Ichiho, Henry M; Roby, Faiese T; Ponausuia, Elisapeta S; Aitaoto, Nia

    2013-05-01

    Non-communicable diseases (NCD) have been identified as a health emergency in the US-affiliated Pacific Islands (USAPI).1 This assessment, funded by the National Institutes of Health, was conducted in American Samoa and describes the burden of selected NCDs (ie, diabetes, heart disease, hypertension, stroke, and chronic kidney disease); and assesses the system of service capacity and activities regarding service delivery, data collection and reporting as well as identifies the issues needing to be addressed. Findings reveal that nutrient-poor diet, lack of physical activity, and other lifestyle behaviors are associated with overweight and obesity and subsequent NCDs that impact the morbidity and mortality of the population. The leading causes of death include heart disease, diabetes, cancer and stroke. Population surveys show that 93% of the adults are overweight or obese and 47% have diabetes. Among public school children, 44.6% are overweight or obese. Other data show that between 2006 and 2010, there was a 33% increase in the number of patients receiving hemodialysis. Other findings show significant gaps in the system of administrative, clinical, data, and support services to address these NCDs. There is a paucity of health plans, policy and procedure manuals, coordination among providers, and lack of common standards of care. The combined administrative and clinical system of service needs were identified and prioritized. They include the need for a Territory-wide health strategy and plan, need for standards of care, and a need for collaborative team approach for the treatment and management of patients with diabetes and other chronic diseases.

  6. Standardized acquisition, storing and provision of 3D enabled spatial data

    NASA Astrophysics Data System (ADS)

    Wagner, B.; Maier, S.; Peinsipp-Byma, E.

    2017-05-01

    In the area of working with spatial data, in addition to the classic, two-dimensional geometrical data (maps, aerial images, etc.), the needs for three-dimensional spatial data (city models, digital elevation models, etc.) is increasing. Due to this increased demand the acquiring, storing and provision of 3D enabled spatial data in Geographic Information Systems (GIS) is more and more important. Existing proprietary solutions quickly reaches their limits during data exchange and data delivery to other systems. They generate a large workload, which will be very costly. However, it is noticeable that these expenses and costs can generally be significantly reduced using standards. The aim of this research is therefore to develop a concept in the field of three-dimensional spatial data that runs on existing standards whenever possible. In this research, the military image analysts are the preferred user group of the system. To achieve the objective of the widest possible use of standards in spatial 3D data, existing standards, proprietary interfaces and standards under discussion have been analyzed. Since the here used GIS of the Fraunhofer IOSB is already using and supporting OGC (Open Geospatial Consortium) and NATO-STANAG (NATO-Standardization Agreement) standards for the most part of it, a special attention for possible use was laid on their standards. The most promising standard is the OGC standard 3DPS (3D Portrayal Service) with its occurrences W3DS (Web 3D Service) and WVS (Web View Service). A demo system was created, using a standardized workflow from the data acquiring, storing and provision and showing the benefit of our approach.

  7. Countermeasures for Developing New Energy Bus Standards in China

    NASA Astrophysics Data System (ADS)

    Shi, Xin

    2018-01-01

    With the rapid development of new energy vehicle technology, new energy bus has become more and more popular in China, and the relevant standards and policy are urgently needed to guide the market. According to the assessment of the development situation on new energy vehicle technology and new energy bus, combing with traffic policy guidance and the development trend of new energy vehicles, this paper aims to put forward the countermeasures of the new energy bus standard in China, including standard system, key standards and relevant recommendations. Research result is expected to provide decision support for the wide application of new energy bus in China.

  8. National Medical Terminology Server in Korea

    NASA Astrophysics Data System (ADS)

    Lee, Sungin; Song, Seung-Jae; Koh, Soonjeong; Lee, Soo Kyoung; Kim, Hong-Gee

    Interoperable EHR (Electronic Health Record) necessitates at least the use of standardized medical terminologies. This paper describes a medical terminology server, LexCare Suite, which houses terminology management applications, such as a terminology editor, and a terminology repository populated with international standard terminology systems such as Systematized Nomenclature of Medicine (SNOMED). The server is to satisfy the needs of quality terminology systems to local primary to tertiary hospitals. Our partner general hospitals have used the server to test its applicability. This paper describes the server and the results of the applicability test.

  9. Procurement of a more efficient railroad system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Detmold, P.J.

    An analysis of how new technology penetrates the railroad system and who initiates the changes suggests ways for improving the procedures. The author identifies a six-step process in transport development which includes invention, innovation, information dissemination, and persuasion. He concludes that poor economic justification and the lack of capital explain the low rate of equipment replacement. The nature of the market and the need for standardized specification appear to influence procurement changes, but both suppliers and transport operators must be convinced of the need for change. The Advanced Train Control Systems Project illustrates how the initiation process works.

  10. Evaluation of the National Human Immunodeficiency Virus Surveillance System for the 2011 diagnosis year.

    PubMed

    Karch, Debra L; Chen, Mi; Tang, Tian

    2014-01-01

    In 2009, the Centers for Disease Control and Prevention completed migration of all 59 surveillance project areas (PAs) from the case-based HIV/AIDS Reporting System to the document-based Enhanced HIV/AIDS Reporting System. We conducted a PA-level assessment of Enhanced HIV/AIDS Reporting System process and outcome standards for HIV infection cases. Process standards were reported by PAs and outcome standards were calculated using standardized Centers for Disease Control and Prevention SAS code. A total of 59 PAs including 50 US states, the District of Columbia, 6 separately funded cities (Chicago, Houston, Los Angeles County, New York City, Philadelphia, and San Francisco), and 2 territories (Puerto Rico and the Virgin Islands). Cases diagnosed or reported to the PA surveillance system between January 1, 2011, and December 31, 2011, using data collected through December 2012. Process standards for death ascertainment and intra- and interstate case de-duplication; outcome standards for completeness and timeliness of case reporting, data quality, intrastate duplication rate, risk factor ascertainment, and completeness of initial CD4 and viral load reporting. Fifty-five of 59 PAs (93%) reported linking cases to state vital records death certificates during 2012, 76% to the Social Security Death Master File, and 59% to the National Death Index. Seventy percent completed monthly intrastate, and 63% completed semiannual interstate de-duplication. Eighty-three percent met the 85% or more case ascertainment standard, and 92% met the 66% or more timeliness standard; 75% met the 97% or more data quality standard; all PAs met the 5% or less intrastate duplication rate; 41% met the 85% or more risk factor ascertainment standard; 90% met the 50% or more standard for initial CD4; and 93% met the same standard for viral load reporting. Overall, 7% of PAs met all 11 process and outcome standards. Findings support the need for continued improvement in HIV surveillance activities and monitoring of system outcomes.

  11. HL7 and DICOM based integration of radiology departments with healthcare enterprise information systems.

    PubMed

    Blazona, Bojan; Koncar, Miroslav

    2007-12-01

    Integration based on open standards, in order to achieve communication and information interoperability, is one of the key aspects of modern health care information systems. However, this requirement represents one of the major challenges for the Information and Communication Technology (ICT) solutions, as systems today use diverse technologies, proprietary protocols and communication standards which are often not interoperable. One of the main producers of clinical information in healthcare settings represent Radiology Information Systems (RIS) that communicate using widely adopted DICOM (Digital Imaging and COmmunications in Medicine) standard, but in very few cases can efficiently integrate information of interest with other systems. In this context we identified HL7 standard as the world's leading medical ICT standard that is envisioned to provide the umbrella for medical data semantic interoperability, which amongst other things represents the cornerstone for the Croatia's National Integrated Healthcare Information System (IHCIS). The aim was to explore the ability to integrate and exchange RIS originated data with Hospital Information Systems based on HL7's CDA (Clinical Document Architecture) standard. We explored the ability of HL7 CDA specifications and methodology to address the need of RIS integration HL7 based healthcare information systems. We introduced the use of WADO service interconnection to IHCIS and finally CDA rendering in widely used Internet explorers. The outcome of our pilot work proves our original assumption of HL7 standard being able to adopt radiology data into the integrated healthcare systems. Uniform DICOM to CDA translation scripts and business processes within IHCIS is desired and cost effective regarding to use of supporting IHCIS services aligned to SOA.

  12. The need for a comprehensive expert system development methodology

    NASA Technical Reports Server (NTRS)

    Baumert, John; Critchfield, Anna; Leavitt, Karen

    1988-01-01

    In a traditional software development environment, the introduction of standardized approaches has led to higher quality, maintainable products on the technical side and greater visibility into the status of the effort on the management side. This study examined expert system development to determine whether it differed enough from traditional systems to warrant a reevaluation of current software development methodologies. Its purpose was to identify areas of similarity with traditional software development and areas requiring tailoring to the unique needs of expert systems. A second purpose was to determine whether existing expert system development methodologies meet the needs of expert system development, management, and maintenance personnel. The study consisted of a literature search and personal interviews. It was determined that existing methodologies and approaches to developing expert systems are not comprehensive nor are they easily applied, especially to cradle to grave system development. As a result, requirements were derived for an expert system development methodology and an initial annotated outline derived for such a methodology.

  13. System Software Framework for System of Systems Avionics

    NASA Technical Reports Server (NTRS)

    Ferguson, Roscoe C.; Peterson, Benjamin L; Thompson, Hiram C.

    2005-01-01

    Project Constellation implements NASA's vision for space exploration to expand human presence in our solar system. The engineering focus of this project is developing a system of systems architecture. This architecture allows for the incremental development of the overall program. Systems can be built and connected in a "Lego style" manner to generate configurations supporting various mission objectives. The development of the avionics or control systems of such a massive project will result in concurrent engineering. Also, each system will have software and the need to communicate with other (possibly heterogeneous) systems. Fortunately, this design problem has already been solved during the creation and evolution of systems such as the Internet and the Department of Defense's successful effort to standardize distributed simulation (now IEEE 1516). The solution relies on the use of a standard layered software framework and a communication protocol. A standard framework and communication protocol is suggested for the development and maintenance of Project Constellation systems. The ARINC 653 standard is a great start for such a common software framework. This paper proposes a common system software framework that uses the Real Time Publish/Subscribe protocol for framework-to-framework communication to extend ARINC 653. It is highly recommended that such a framework be established before development. This is important for the success of concurrent engineering. The framework provides an infrastructure for general system services and is designed for flexibility to support a spiral development effort.

  14. Standardization--the iron cage of nurses' work?

    PubMed

    Meum, Torbjørg; Wangensteen, Gro; Igesund, Harald; Ellingsen, Gunnar; Monteiro, Eric

    2010-01-01

    This paper explores how nursing classification has been adopted and used in a local clinical practice. The study is inspired by the socio-technical approach to information system and illustrates some of the enabling and constraining properties of standardization. Findings from the study show how international standards have been embedded into local practice. At the same time, the use of locally developed standards has increased and many of these are similar to the international classification. This indicates that we need to move beyond the dichotomous perspective on nurses' use of classification and strive for more flexible solutions.

  15. Opening Up "Open Systems": Moving toward True Interoperability among Library Software. DataResearch Automation Guide Series, Number One.

    ERIC Educational Resources Information Center

    Data Research Associates, Inc., St. Louis, MO.

    The topic of open systems as it relates to the needs of libraries to establish interoperability between dissimilar computer systems can be clarified by an understanding of the background and evolution of the issue. The International Standards Organization developed a model to link dissimilar computers, and this model has evolved into consensus…

  16. Education Standards for the 21st Century: Opening Statements of Ministers at the Asia-Pacific Economic Cooperation Education Ministerial, August 1992.

    ERIC Educational Resources Information Center

    Office of Policy and Planning (ED), Washington, DC.

    While the member countries of the Asia-Pacific Economic Cooperation (APEC) have many differences in culture, history, and level of economic development, all APEC representatives who attended this ministerial agreed on the importance of establishing education standards and examination systems to meet the needs of their people in the 21st century.…

  17. LLNL Genomic Assessment: Viral and Bacterial Sequencing Needs for TMTI, Task 1.4.2 Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Slezak, T; Borucki, M; Lam, M

    Good progress has been made on both bacterial and viral sequencing by the TMTI centers. While access to appropriate samples is a limiting factor to throughput, excellent progress has been made with respect to getting agreements in place with key sources of relevant materials. Sharing of sequenced genomes funded by TMTI has been extremely limited to date. The April 2010 exercise should force a resolution to this, but additional managerial pressures may be needed to ensure that rapid sharing of TMTI-funded sequencing occurs, regardless of collaborator constraints concerning ultimate publication(s). Policies to permit TMTI-internal rapid sharing of sequenced genomes shouldmore » be written into all TMTI agreements with collaborators now being negotiated. TMTI needs to establish a Web-based system for tracking samples destined for sequencing. This includes metadata on sample origins and contributor, information on sample shipment/receipt, prioritization by TMTI, assignment to one or more sequencing centers (including possible TMTI-sponsored sequencing at a contributor site), and status history of the sample sequencing effort. While this system could be a component of the AFRL system, it is not part of any current development effort. Policy and standardized procedures are needed to ensure appropriate verification of all TMTI samples prior to the investment in sequencing. PCR, arrays, and classical biochemical tests are examples of potential verification methods. Verification is needed to detect miss-labeled, degraded, mixed or contaminated samples. Regular QC exercises are needed to ensure that the TMTI-funded centers are meeting all standards for producing quality genomic sequence data.« less

  18. Teaching Sustainable Energy and Power Electronics to Engineering Students in a Laboratory Environment Using Industry-Standard Tools

    ERIC Educational Resources Information Center

    Ochs, David S.; Miller, Ruth Douglas

    2015-01-01

    Power electronics and renewable energy are two important topics for today's power engineering students. In many cases, the two topics are inextricably intertwined. As the renewable energy sector grows, the need for engineers qualified to design such systems grows as well. In order to train such engineers, new courses are needed that highlight the…

  19. Workshop on Systems Interconnexions: Standardization, Uniformity and Co-ordination in Population/Family Planning Information Network (Kuala Lumpur, Malaysia, April 12-16, 1976).

    ERIC Educational Resources Information Center

    Hawaii Univ., Honolulu. East-West Center.

    The "information explosion" in the field of population has created a need for proper identification, systematization, dissemination, and utilization of population information. To help meet these needs in the Asian and Pacific regions, the Clearinghouse and Information Section of the Population Division of ESCAP (Economic and Social…

  20. Meat standards and grading: a world view.

    PubMed

    Polkinghorne, R J; Thompson, J M

    2010-09-01

    This paper addresses the principles relating to meat standards and grading of beef and advances the concept that potential exists to achieve significant desirable change from adopting more consumer focused systems within accurate value-based payment frameworks. The paper uses the definitions that classification is a set of descriptive terms describing features of the carcass that are useful to those involved in the trading of carcasses, whereas grading is the placing of different values on carcasses for pricing purposes, depending on the market and requirements of traders. A third definition is consumer grading, which refers to grading systems that seek to define or predict consumer satisfaction with a cooked meal. The development of carcass classification and grading schemes evolved from a necessity to describe the carcass using standard terms to facilitate trading. The growth in world trade of meat and meat products and the transition from trading carcasses to marketing individual meal portions raises the need for an international language that can service contemporary needs. This has in part been addressed by the United Nations promoting standard languages on carcasses, cuts, trim levels and cutting lines. Currently no standards exist for describing consumer satisfaction. Recent Meat Standards Australia (MSA) research in Australia, Korea, Ireland, USA, Japan and South Africa showed that consumers across diverse cultures and nationalities have a remarkably similar view of beef eating quality, which could be used to underpin an international language on palatability. Consumer research on the willingness to pay for eating quality shows that consumers will pay higher prices for better eating quality grades and generally this was not affected by demographic or meat preference traits of the consumer. In Australia the MSA eating quality grading system has generated substantial premiums to retailers, wholesalers and to the producer. Future grading schemes which measure both carcass yield and eating quality have the potential to underpin the development and implementation of transparent value-based payment systems which will encourage improved production efficiency throughout the supply chain.

  1. Study on Enhanceing Mechanisim and Policy on Energy Efficiency of Electrical Motor System in China

    NASA Astrophysics Data System (ADS)

    Liu, Ren; Zhao, Yuejin; Liu, Meng; Chen, Lili; Yang, Ming

    2017-12-01

    Motor is a kind of terminal energy-consumption equipment with the maximum power consumption in China every year; compared with international advanced level, the technical innovation of motor equipment, speed regulating system, drive system and automatic intelligent control technique in China still lag behind relatively; the standard technical service support system of motor system is not complete, the energy conserving transformation mode needs to be innovated, and the market development mechanism of motor industry is not perfect, etc. This paper analyzes the promotion mechanism and policy on energy efficiency of the motor system in China in recent years, studies the demonstration cases of successful promotion of high-efficiency motor, standard labeling, financial finance and tax policy, and puts forward suggestions on promotion of high-efficiency motor in China.

  2. Space information systems in the Space Station era; Proceedings of the AIAA/NASA International Symposium on Space Information Systems, Washington, DC and Greenbelt, MD, June 22, 23, 1987

    NASA Technical Reports Server (NTRS)

    Gerard, Mireille (Editor); Edwards, Pamela W. (Editor)

    1988-01-01

    Technological and planning issues for data management, processing, and communication on Space Station Freedom are discussed in reviews and reports by U.S., European, and Japanese experts. The space-information-system strategies of NASA, ESA, and NASDA are discussed; customer needs are analyzed; and particular attention is given to communication and data systems, standards and protocols, integrated system architectures, software and automation, and plans and approaches being developed on the basis of experience from past programs. Also included are the reports from workshop sessions on design to meet customer needs, the accommodation of growth and new technologies, and system interoperability.

  3. Essays on remote monitoring as an emerging tool for centralized management of decentralized wastewater systems

    NASA Astrophysics Data System (ADS)

    Solomon, Clement

    According to the United States Environmental Protections Agency (USEPA), nearly one in four households in the United States depends on an individual septic system (commonly referred as an onsite system or a decentralized wastewater system) to treat and disperse wastewater. More than half of these systems are over 30 years old, and surveys indicate at least 10 to 20% might not be functioning properly. The USEPA concluded in its 1997 report to Congress that adequately managed decentralized wastewater systems (DWS) are a cost-effective and long-term option for meeting public health and water quality goals, particularly in less densely populated areas. The major challenge however is the absence of a guiding national regulatory framework based on consistent performance-based standards and lack of proper management of DWS. These inconsistencies pose a significant threat to our water resources, local economies, and public health. This dissertation addresses key policy and regulatory strategies needed in response to the new realities confronting decentralized wastewater management. The two core objectives of this research are to demonstrate the centralized management of DWS paradigm and to present a scientific methodology to develop performance-based standards (a regulatory shift from prescriptive methods) using remote monitoring. The underlying remote monitoring architecture for centralized DWS management and the value of science-based policy making are presented. Traditionally, prescriptive standards using conventional grab sampling data are the norm by which most standards are set. Three case studies that support the potential of remote monitoring as a tool for standards development and system management are presented. The results revealed a vital role for remote monitoring in the development of standardized protocols, policies and procedures that are greatly lacking in this field. This centralized management and remote monitoring paradigm fits well and complements current USEPA policy (13 elements of management); meets the growing need for qualitative data (objective and numerical); has better time efficiencies as real-time events are sampled and translated into machine-readable signals in a short period of time; allows cost saving rapid response to system recovery and operation; produces labor and economic efficiencies through targeted responses; and, improves the quality and operational costs of any management program. This project was funded by the USEPA grant # C-82878001 as part of the National Onsite Demonstration Project (NODP), West Virginia University.

  4. A Novel Electronic Data Collection System for Large-Scale Surveys of Neglected Tropical Diseases

    PubMed Central

    King, Jonathan D.; Buolamwini, Joy; Cromwell, Elizabeth A.; Panfel, Andrew; Teferi, Tesfaye; Zerihun, Mulat; Melak, Berhanu; Watson, Jessica; Tadesse, Zerihun; Vienneau, Danielle; Ngondi, Jeremiah; Utzinger, Jürg; Odermatt, Peter; Emerson, Paul M.

    2013-01-01

    Background Large cross-sectional household surveys are common for measuring indicators of neglected tropical disease control programs. As an alternative to standard paper-based data collection, we utilized novel paperless technology to collect data electronically from over 12,000 households in Ethiopia. Methodology We conducted a needs assessment to design an Android-based electronic data collection and management system. We then evaluated the system by reporting results of a pilot trial and from comparisons of two, large-scale surveys; one with traditional paper questionnaires and the other with tablet computers, including accuracy, person-time days, and costs incurred. Principle Findings The electronic data collection system met core functions in household surveys and overcame constraints identified in the needs assessment. Pilot data recorders took 264 (standard deviation (SD) 152 sec) and 260 sec (SD 122 sec) per person registered to complete household surveys using paper and tablets, respectively (P = 0.77). Data recorders felt a lack of connection with the interviewee during the first days using electronic devices, but preferred to collect data electronically in future surveys. Electronic data collection saved time by giving results immediately, obviating the need for double data entry and cross-correcting. The proportion of identified data entry errors in disease classification did not differ between the two data collection methods. Geographic coordinates collected using the tablets were more accurate than coordinates transcribed on a paper form. Costs of the equipment required for electronic data collection was approximately the same cost incurred for data entry of questionnaires, whereas repeated use of the electronic equipment may increase cost savings. Conclusions/Significance Conducting a needs assessment and pilot testing allowed the design to specifically match the functionality required for surveys. Electronic data collection using an Android-based technology was suitable for a large-scale health survey, saved time, provided more accurate geo-coordinates, and was preferred by recorders over standard paper-based questionnaires. PMID:24066147

  5. Defining a Communications Satellite Policy System for the 21st Century: A Model for a International Legal Framework and A New _Code of Conduct_

    NASA Astrophysics Data System (ADS)

    Pelton, Joseph N.

    1996-02-01

    This paper addresses the changing international communications environment and explores the key elements of a new policy framework for the 21st Century. It addresses the issues related to changing markets, trade considerations, standards, regulatory changes and international institutions and law. The most important aspects will related to new international policy and regulatory frameworks and in particular to a new international code of ethics and behavior in the field of satellite communications. A new communications satellite policy framework requires systematically addressing the following points: • Multi-lateral agreements at the nation state and the operating entity level • Systematic means to access both private and public capital • Meshing ITU regulations with regional and national policy guidelines including • landing rights" and national allocation procedures. • Systematic approach to local partnerships • Resolving the issue of the relative standing of various satellite systems (i.e. GEO, MEO, and LEO systems) • Resolving the rights, duties, and priorities of satellite facility providers versus types of service prviders. Beyond this policy framework and generalized legal infrastructure there is also another need. This is a need that arises from both increased globalism and competitive international markets. This is what might quite simply be called a "code of reasonable conduct:" To provide global and international communications services effectively and well in the 21st Century will require more than meeting minimum international legal requirements. A new "code of conduct" for global satellite communications will thus likely need to address: • Privacy and surveillance • Ethics of transborder data flow • Censorship and moral values • Cultural and linguistic sensitivity • Freedom of the press and respect for journalistic standards As expanding global information and telecommunications systems grow and impact every aspect of modern life, the need for new international policy and especially new suitable standards of conduct in the field of satellite communications become ever more apparent and necessary.

  6. SAE J2735 standard : applying the systems engineering process.

    DOT National Transportation Integrated Search

    1998-11-01

    As part of the U.S. Department of Transportations Intelligent Vehicle Initiative (IVI) program, the Federal Highway Administration investigated the human factors research needs for integrating in-vehicle safety and driver information technologies ...

  7. Needs assessment of land use modeling for FSUTMS, phase 1.

    DOT National Transportation Integrated Search

    2012-01-06

    In Florida, the transportation demand modeling process is done through the Cube software, following the statewide modeling system (The Florida Standard Urban Transportation Model Structure or FSUTMS). Other states and metropolitan planning organizati...

  8. 40 CFR 165.92 - What if I need both a containment pad and a secondary containment unit?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... may combine containment pads and secondary containment units as an integrated system provided the... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PESTICIDE MANAGEMENT AND DISPOSAL Standards for Pesticide...

  9. 40 CFR 165.92 - What if I need both a containment pad and a secondary containment unit?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... may combine containment pads and secondary containment units as an integrated system provided the... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PESTICIDE MANAGEMENT AND DISPOSAL Standards for Pesticide...

  10. 40 CFR 165.92 - What if I need both a containment pad and a secondary containment unit?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... may combine containment pads and secondary containment units as an integrated system provided the... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PESTICIDE MANAGEMENT AND DISPOSAL Standards for Pesticide...

  11. 40 CFR 165.92 - What if I need both a containment pad and a secondary containment unit?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... may combine containment pads and secondary containment units as an integrated system provided the... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PESTICIDE MANAGEMENT AND DISPOSAL Standards for Pesticide...

  12. 40 CFR 165.92 - What if I need both a containment pad and a secondary containment unit?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... may combine containment pads and secondary containment units as an integrated system provided the... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PESTICIDE MANAGEMENT AND DISPOSAL Standards for Pesticide...

  13. Low-Cost Rapid Usability Testing: Its Application in Both Product Development and System Implementation.

    PubMed

    Kushniruk, Andre; Borycki, Elizabeth

    2017-01-01

    In recent years there has been considerable discussion around the need for certification and regulation of healthcare information technology (IT). In particular, the usability of the products being developed needs to be evaluated. This has included the application of standards designed to ensure the process of system development is user-centered and takes usability into consideration while a product is being developed. In addition to this, in healthcare, organizations in the United States and Europe have also addressed the need and requirement for product certification. However, despite these efforts there are continued reports of unusable and unsafe implementations. In this paper we discuss the need to not only include (and require) usability testing in the one-time development process of health IT products (such as EHRs), but we also argue for the need to additionally develop specific usability standards and requirements for usability testing during the implementation of vendor products (i.e. post product development) in healthcare settings. It is further argued that health IT products that may have been certified regarding their development process will still require application of usability testing in the process of implementing them in real hospital settings in order to ensure usability and safety. This is needed in order to ensure that the final result of both product development and implementation processes take into account and apply the latest usability principles and methods.

  14. A Comprehensive System of School Reform Based on Student Results

    ERIC Educational Resources Information Center

    Little, Mary E.

    2007-01-01

    School reform is achieved through the collaboration and coordination among educators with the mutual goal of improved learning for all students. Given the complexity within and among educational systems, the need to develop and implement a common framework of school reform based upon mutually agreed-upon goals, standards, outcomes, and…

  15. Information-Sharing Application Standards for Integrated Government Systems

    DTIC Science & Technology

    2010-12-01

    23 4. Federated Search and Role-Based Data Access ................ 24 G. LESSONS FROM HSIN...4. Federated Search and Role-Based Data Access One of the original purposes of HSIN was to facilitate information sharing...recent search paradigm, Federated Search , allows separate systems to feed external data requests without the need for a huge centralized database

  16. Reengineering Framework for Systems in Education

    ERIC Educational Resources Information Center

    Choquet, Christophe; Corbiere, Alain

    2006-01-01

    Specifications recently proposed as standards in the domain of Technology Enhanced Learning (TEL), question the designers of TEL systems on how to put them into practice. Recent studies in Model Driven Engineering have highlighted the need for a framework which could formalize the use of these specifications as well as enhance the quality of the…

  17. Community-Wide Zero Energy Ready Home Standard

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Herk, A.; Beggs, T.

    This report outlines the steps a developer can use when looking to create and implement higher performance standards such as the U.S. Department of Energy (DOE) Zero Energy Ready Home (ZERH) standards in a community. The report also describes the specific examples of how this process was followed by a developer, Forest City, in the Stapleton community in Denver, Colorado. IBACOS described the steps used to begin to bring the DOE ZERH standard to the Forest City Stapleton community based on 15 years of community-scale development work done by IBACOS. As a result of this prior IBACOS work, the teammore » gained an understanding of the various components that a master developer needs to consider and created strategies for incorporating those components in the initial phases of development to achieve higher performance buildings in the community. An automated scoring system can be used to perform an internal audit that provides a detailed and consistent evaluation of how several homes under construction or builders' floor plans compare with the requirements of the DOE Zero Energy Ready Home program. This audit can be performed multiple times at specific milestones during construction to allow the builder to make changes as needed throughout construction for the project to meet Zero Energy Ready Home standards. This scoring system also can be used to analyze a builder's current construction practices and design.« less

  18. Web Service Distributed Management Framework for Autonomic Server Virtualization

    NASA Astrophysics Data System (ADS)

    Solomon, Bogdan; Ionescu, Dan; Litoiu, Marin; Mihaescu, Mircea

    Virtualization for the x86 platform has imposed itself recently as a new technology that can improve the usage of machines in data centers and decrease the cost and energy of running a high number of servers. Similar to virtualization, autonomic computing and more specifically self-optimization, aims to improve server farm usage through provisioning and deprovisioning of instances as needed by the system. Autonomic systems are able to determine the optimal number of server machines - real or virtual - to use at a given time, and add or remove servers from a cluster in order to achieve optimal usage. While provisioning and deprovisioning of servers is very important, the way the autonomic system is built is also very important, as a robust and open framework is needed. One such management framework is the Web Service Distributed Management (WSDM) system, which is an open standard of the Organization for the Advancement of Structured Information Standards (OASIS). This paper presents an open framework built on top of the WSDM specification, which aims to provide self-optimization for applications servers residing on virtual machines.

  19. Paramedic specialization: a strategy for better out-of-hospital care.

    PubMed

    Caffrey, Sean M; Clark, John R; Bourn, Scott; Cole, Jim; Cole, John S; Mandt, Maria; Murray, Jimm; Sibold, Harry; Stuhlmiller, David; Swanson, Eric R

    2014-01-01

    Demographic, economic, and political forces are driving significant change in the US health care system. Paramedics are a health profession currently providing advanced emergency care and medical transportation throughout the United States. As the health care system demands more team-based care in nonacute, community, interfacility, and tactical response settings, specialized paramedic practitioners could be a valuable and well-positioned resource to meet these needs. Currently, there is limited support for specialty certifications that demand appropriate education, training, or experience standards before specialized practice by paramedics. A fragmented approach to specialty paramedic practice currently exists across our country in which states, regulators, nonprofit organizations, and other health care professions influence and regulate the practice of paramedicine. Multiple other medical professions, however, have already developed effective systems over the last century that can be easily adapted to the practice of paramedicine. Paramedicine practitioners need to organize a profession-based specialty board to organize and standardize a specialty certification system that can be used on a national level. Copyright © 2014 Air Medical Journal Associates. Published by Elsevier Inc. All rights reserved.

  20. A bidirectional ACR-NEMA interface between the VA's DHCP Integrated Imaging System and the Siemens-Loral PACS.

    PubMed Central

    Kuzmak, P. M.; Dayhoff, R. E.

    1992-01-01

    There is a wide range of requirements for digital hospital imaging systems. Radiology needs very high resolution black and white images. Other diagnostic disciplines need high resolution color imaging capabilities. Images need to be displayed in many locations throughout the hospital. Different imaging systems within a hospital need to cooperate in order to show the whole picture. At the Baltimore VA Medical Center, the DHCP Integrated Imaging System and a commercial Picture Archiving and Communication System (PACS) work in concert to provide a wide-range of departmental and hospital-wide imaging capabilities. An interface between the DHCP and the Siemens-Loral PACS systems enables patient text and image data to be passed between the two systems. The interface uses ACR-NEMA 2.0 Standard messages extended with shadow groups based on draft ACR-NEMA 3.0 prototypes. A Novell file server, accessible to both systems via Ethernet, is used to communicate all the messages. Patient identification information, orders, ADT, procedure status, changes, patient reports, and images are sent between the two systems across the interface. The systems together provide an extensive set of imaging capabilities for both the specialist and the general practitioner. PMID:1482906

  1. A bidirectional ACR-NEMA interface between the VA's DHCP Integrated Imaging System and the Siemens-Loral PACS.

    PubMed

    Kuzmak, P M; Dayhoff, R E

    1992-01-01

    There is a wide range of requirements for digital hospital imaging systems. Radiology needs very high resolution black and white images. Other diagnostic disciplines need high resolution color imaging capabilities. Images need to be displayed in many locations throughout the hospital. Different imaging systems within a hospital need to cooperate in order to show the whole picture. At the Baltimore VA Medical Center, the DHCP Integrated Imaging System and a commercial Picture Archiving and Communication System (PACS) work in concert to provide a wide-range of departmental and hospital-wide imaging capabilities. An interface between the DHCP and the Siemens-Loral PACS systems enables patient text and image data to be passed between the two systems. The interface uses ACR-NEMA 2.0 Standard messages extended with shadow groups based on draft ACR-NEMA 3.0 prototypes. A Novell file server, accessible to both systems via Ethernet, is used to communicate all the messages. Patient identification information, orders, ADT, procedure status, changes, patient reports, and images are sent between the two systems across the interface. The systems together provide an extensive set of imaging capabilities for both the specialist and the general practitioner.

  2. PDA Single-Use Systems Cross-Organizational Workshop-Meeting Summary, May 14, 2014-PDA Global Headquarters, Bethesda, MD.

    PubMed

    Repetto, Robert; Levy, Richard

    2015-01-01

    The application of single-use systems, or disposables, has increased dramatically in the past 10 years. Although some elements of the pharmaceutical and biotech manufacturing process were single-use and therefore disposable and not reused, the majority of the process equipment and fluid path was cleaned and reused by end users. Today, much more of the manufacturing process is composed of single-use systems, and there are some biotech plants that use single-use systems exclusively. Because of this increasing reliance on suppliers, there is an urgent need for more formal standards specifically for single-use system technology. The objective of this PDA-sponsored workshop held on May 14, 2014 was twofold: (1) to promote a harmonized approach to supporting single-use system activities within the industry and in so doing to minimize duplication of efforts, and (2) to communicate ongoing single-use system initiatives among the group. Representatives of ASME, ASTM, BPOG, BPSA, ELSIE, PDA, PQRI, and USP, as well as representatives of CBER and CDER of FDA, attended. Today, the majority of pharmaceutical and biotech drug manufacturing equipment is cleaned and reused. However, in the past 10 years, the use of disposable manufacturing systems has increased dramatically; there are even some biotech-derived drugs that are manufactured entirely using single-use technology. This movement toward disposables has placed increased reliance on disposable equipment suppliers, each of which manufactures its products independently to meet customer needs. This fact has led to non-uniformity in design for connectors and similar sub-processes, and has made the need for more formal industry standards. The objective of this PDA-sponsored workshop held on May 14, 2014 was twofold: (1) to promote a harmonized approach to supporting single-use system projects within the industry and in so doing to minimize duplication of efforts, and (2) to communicate ongoing single-use system initiatives among the group. Representatives of industry associations and standard-setting organizations, as well as representatives of the U.S. Food and Drug Administration, attended. © PDA, Inc. 2015.

  3. Adaptive Multilevel Middleware for Object Systems

    DTIC Science & Technology

    2006-12-01

    the system at the system-call level or using the CORBA-standard Extensible Transport Framework ( ETF ). Transparent insertion is highly desirable from an...often as it needs to. This is remedied by using the real-time scheduling class in a stock Linux kernel. We used schedsetscheduler system call (with...real-time scheduling class (SCHEDFIFO) for all the ML-NFD programs, later experiments with CPU load indicate that a stock Linux kernel is not

  4. Bridging Hydroinformatics Services Between HydroShare and SWATShare

    NASA Astrophysics Data System (ADS)

    Merwade, V.; Zhao, L.; Song, C. X.; Tarboton, D. G.; Goodall, J. L.; Stealey, M.; Rajib, A.; Morsy, M. M.; Dash, P. K.; Miles, B.; Kim, I. L.

    2016-12-01

    Many cyberinfrastructure systems in the hydrologic and related domains emerged in the past decade with more being developed to address various data management and modeling needs. Although clearly beneficial to the broad user community, it is a challenging task to build interoperability across these systems due to various obstacles including technological, organizational, semantic, and social issues. This work presents our experience in developing interoperability between two hydrologic cyberinfrastructure systems - SWATShare and HydroShare. HydroShare is a large-scale online system aiming at enabling the hydrologic user community to share their data, models, and analysis online for solving complex hydrologic research questions. On the other side, SWATShare is a focused effort to allow SWAT (Soil and Water Assessment Tool) modelers share, execute and analyze SWAT models using high performance computing resources. Making these two systems interoperable required common sign-in through OAuth, sharing of models through common metadata standards and use of standard web-services for implementing key import/export functionalities. As a result, users from either community can leverage the resources and services across these systems without having to manually importing, exporting, or processing their models. Overall, this use case is an example that can serve as a model for the interoperability among other systems as no one system can provide all the functionality needed to address large interdisciplinary problems.

  5. Transforming to a computerized system for nursing care: organizational success within Magnet idealism.

    PubMed

    Lindgren, Carolyn L; Elie, Leslie G; Vidal, Elizabeth C; Vasserman, Alex

    2010-01-01

    In reaching the goal for standardized, quality care, a not-for-profit healthcare system consisting of seven institutional entities is transforming nursing practice guidelines, patient care workflow, and patient documents into electronic, online, real-time modalities for use across departments and all healthcare delivery entities of the system. Organizational structure and a strategic plan were developed for the 2-year Clinical Transformation Project. The Siemens Patient Care Document System was adopted and adapted to the hospitals' documentation and information needs. Two fast-track sessions of more than 100 nurses and representatives from other health disciplines were held to standardize assessments, histories, care protocols, and interdisciplinary plans of care for the top 10 diagnostic regulatory groups. Education needs of the users were addressed. After the first year, a productive, functional system is evidenced. For example, the bar-coded Medication Administration Check System is in full use on the clinical units of one of the hospitals, and the other institutional entities are at substantial stages of implementation of Patient Care Documentation System. The project requires significant allocation of personnel and financial resources for a highly functional informatics system that will transform clinical care. The project exemplifies four of the Magnet ideals and serves as a model for others who may be deciding about launching a similar endeavor.

  6. Aircraft voice intercommunications system design for Project Oculus

    NASA Astrophysics Data System (ADS)

    Wilhelm, Jay; Smith, James E.

    2006-05-01

    Project Oculus, an ongoing research platform for deploying airborne sensors on a C-130 aircraft, is currently in its pre-flight testing phase. The sensor platform is divided into two systems that rest on standard 463L pallets; a sensor deployment pallet and an operator station. The sensor pallet consists of a deployment arm and a pod, which can contain various sensors. The operator station houses power control equipment, data acquisition, and operators who control the sensors. Oculus is designed to fly on a C-130 aircraft, which has very high internal audible noise. Although Oculus' operator station contains noise-deadening material, a headset intercommunication system needs to be designed. This system must comply with different headset standards, communicate with the C-130 intercom, and be expandable to accommodate various audio sources like radios and satellites receivers. Throughout the years, intercom systems and headsets have evolved from the original standard consisting of an impedance rating of a speaker and a microphone. Early intercom systems were highly limited in functionality and quality due to simple electronics and common grounding. Advances in electronics allowed for the evolution of headset standards and intercom equipment, which permitted a multitude of new configurations and improved sound quality. With these advances, multiple headset standards and intercom interfaces have become popular among the military and civilian aviation. Due to the different standards for headsets, impedance matching plays a major role in the design of an intercom system. Oculus is a multi-mission platform and therefore must be designed to support a variety of standards including civilian and military headsets. This paper outlines the intercom units and parts considered for use in Oculus, and a design criteria for an extendable intercom system for Oculus.

  7. Ambient assisted living healthcare frameworks, platforms, standards, and quality attributes.

    PubMed

    Memon, Mukhtiar; Wagner, Stefan Rahr; Pedersen, Christian Fischer; Beevi, Femina Hassan Aysha; Hansen, Finn Overgaard

    2014-03-04

    Ambient Assisted Living (AAL) is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions.

  8. Ambient Assisted Living Healthcare Frameworks, Platforms, Standards, and Quality Attributes

    PubMed Central

    Memon, Mukhtiar; Wagner, Stefan Rahr; Pedersen, Christian Fischer; Beevi, Femina Hassan Aysha; Hansen, Finn Overgaard

    2014-01-01

    Ambient Assisted Living (AAL) is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions. PMID:24599192

  9. Addressing standards of care in resource-limited settings.

    PubMed

    Dawson, Liza; Klingman, Karin L; Marrazzo, Jeanne

    2014-01-01

    : The choice between "best-known" standards of care (SOC) or "best available" standards as the control arm in a clinical trial is a fundamental dilemma in clinical research in resource-limited settings (RLS). When the health system is delivering less than an optimal level of care, using highest standard of care in a clinical trial may produce results that cannot be implemented or sustained locally. On the other hand, using interventions that are more feasible in the local setting may involve suboptimal care, and clinical outcomes may be affected. The need for improved standards in health systems in RLS, and the difficulty in securing them, has led many researchers advocate for policy changes at the national or international level to improve clinical care more systemically. SOC decisions in a clinical trial affect the level of benefit provided to study participants and the policy implications of the trial findings. SOC choices should provide high-quality care to help advance the health care system in host countries participating in the trial, but balancing the scientific and ethical objectives of SOC choices is difficult, and there is no single formula for selecting the appropriate SOC. Despite the challenges, well-designed and conducted clinical trials can and should make significant contributions to health systems in RLS.

  10. Technical Standards for Nursing Education Programs in the 21st Century.

    PubMed

    Ailey, Sarah H; Marks, Beth

    The Institute of Medicine (2000, 2002) exposed serious safety problems in the health system and called for total qualitative system change. The Institute of Medicine (2011, 2015) also calls for improving the education of nurses to provide leadership for a redesigned health system. Intertwined with improving education is the need to recruit and retain diverse highly qualified students. Disability is part of diversity inclusion, but current technical standards (nonacademic requirements) for admission to many nursing programs are a barrier to the entry of persons with disabilities. Rehabilitation nurse leaders are in a unique position to improve disability diversity in nursing. The purpose of this paper is to discuss the importance of disability diversity in nursing. The history of existing technical standards used in many nursing programs is reviewed along with examples. On the basis of the concept that disability inclusion is a part of diversity inclusion, we propose a new model of technical standards for nursing education. Rehabilitation nurse leaders can lead in eliminating barriers to persons with disabilities entering nursing.

  11. A system architecture for sharing de-identified, research-ready brain scans and health information across clinical imaging centers.

    PubMed

    Chervenak, Ann L; van Erp, Theo G M; Kesselman, Carl; D'Arcy, Mike; Sobell, Janet; Keator, David; Dahm, Lisa; Murry, Jim; Law, Meng; Hasso, Anton; Ames, Joseph; Macciardi, Fabio; Potkin, Steven G

    2012-01-01

    Progress in our understanding of brain disorders increasingly relies on the costly collection of large standardized brain magnetic resonance imaging (MRI) data sets. Moreover, the clinical interpretation of brain scans benefits from compare and contrast analyses of scans from patients with similar, and sometimes rare, demographic, diagnostic, and treatment status. A solution to both needs is to acquire standardized, research-ready clinical brain scans and to build the information technology infrastructure to share such scans, along with other pertinent information, across hospitals. This paper describes the design, deployment, and operation of a federated imaging system that captures and shares standardized, de-identified clinical brain images in a federation across multiple institutions. In addition to describing innovative aspects of the system architecture and our initial testing of the deployed infrastructure, we also describe the Standardized Imaging Protocol (SIP) developed for the project and our interactions with the Institutional Review Board (IRB) regarding handling patient data in the federated environment.

  12. A System Architecture for Sharing De-Identified, Research-Ready Brain Scans and Health Information Across Clinical Imaging Centers

    PubMed Central

    Chervenak, Ann L.; van Erp, Theo G.M.; Kesselman, Carl; D’Arcy, Mike; Sobell, Janet; Keator, David; Dahm, Lisa; Murry, Jim; Law, Meng; Hasso, Anton; Ames, Joseph; Macciardi, Fabio; Potkin, Steven G.

    2015-01-01

    Progress in our understanding of brain disorders increasingly relies on the costly collection of large standardized brain magnetic resonance imaging (MRI) data sets. Moreover, the clinical interpretation of brain scans benefits from compare and contrast analyses of scans from patients with similar, and sometimes rare, demographic, diagnostic, and treatment status. A solution to both needs is to acquire standardized, research-ready clinical brain scans and to build the information technology infrastructure to share such scans, along with other pertinent information, across hospitals. This paper describes the design, deployment, and operation of a federated imaging system that captures and shares standardized, de-identified clinical brain images in a federation across multiple institutions. In addition to describing innovative aspects of the system architecture and our initial testing of the deployed infrastructure, we also describe the Standardized Imaging Protocol (SIP) developed for the project and our interactions with the Institutional Review Board (IRB) regarding handling patient data in the federated environment. PMID:22941984

  13. Determination of water environment standards based on water quality criteria in China: Limitations and feasibilities.

    PubMed

    Wang, Tieyu; Zhou, Yunqiao; Bi, Cencen; Lu, Yonglong; He, Guizhen; Giesy, John P

    2017-07-01

    There is a need to formulate water environment standards (WESs) from the current water quality criteria (WQC) in China. To this end, we briefly summarize typical mechanisms applied in several countries with longer histories of developing WESs, and three limitations to formulating WESs in China were identified. After analyzing the feasibility factors including economic development, scientific support capability and environmental policies, we realized that China is still not ready for a complete change from its current nation-wide unified WES system to a local-standard-based system. Thus, we proposed a framework for transformation from WQC to WESs in China. The framework consists of three parts, including responsibilities, processes and policies. The responsibilities include research authorization, development of guidelines, and collection of information, at both national and local levels; the processes include four steps and an impact factor system to establish water quality standards; and the policies include seven specific proposals. Copyright © 2016. Published by Elsevier B.V.

  14. Security concept in 'MyAngelWeb' a website for the individual patient at risk of emergency.

    PubMed

    Pinciroli, F; Nahaissi, D; Boschini, M; Ferrari, R; Meloni, G; Camnasio, M; Spaggiari, P; Carnerone, G

    2000-11-01

    We describe the Security Plan for the 'MyAngelWeb' service. The different actors involved in the service are subject to different security procedures. The core of the security system is implemented at the host site by means of a DBMS and standard Information Technology tools. Hardware requirements for sustainable security are needed at the web-site construction sites. They are not needed at the emergency physician's site. At the emergency physician's site, a two-way authentication system (password and test phrase method) is implemented.

  15. Security concept in 'MyAngelWeb((R))' a website for the individual patient at risk of emergency.

    PubMed

    Pinciroli; Nahaissi; Boschini; Ferrari; Meloni; Camnasio; Spaggiari; Carnerone

    2000-11-01

    We describe the Security Plan for the 'MyAngelWeb' service. The different actors involved in the service are subject to different security procedures. The core of the security system is implemented at the host site by means of a DBMS and standard Information Technology tools. Hardware requirements for sustainable security are needed at the web-site construction sites. They are not needed at the emergency physician's site. At the emergency physician's site, a two-way authentication system (password and test phrase method) is implemented.

  16. [ELEMENTS OF A SYSTEMATIC APPROACH TO HYGIENIC REGULATION OF XENOBIOTICS].

    PubMed

    Shtabskiy, B M; Gzhegotskiy, M R; Shafran, L M

    2016-01-01

    Hygienic standardization (HS) of chemicals remains to be the one of the effective ways to ensure chemical safety of the population. At that hygienic standards (such as maximum allowable concentrations--MACs) are interrelated and aggregated into the coherent systems. Therefore, the task of the study was in establishment of the logic of inter- standard relations between the existing standards and actualization of legitimate relations of the interrelations such as MACwz/MACatm, (i.e., to systematize standards) and so as CL₅₀/MACwz (reflecting the ratio of reliability). In the suggested systemic approach the benchmark indices of the proposed HS system are the values of the MACwz. Standards for other media, including atmosphere air may be only some compartments of MACwz. The performed studies and calculations allowed to justify and implement the system approach into the practice of HS in Ukraine. There is need for further search for additional solutions in nonreachability of LC₅₀ in the experiment, justification of standards for the population in the absence of MACwz, comparison with the data of normative databases of other countries. It is necessary to introduce the value of permissible deviation from the requirements of the systemness, to embody conditions (1)-(7) into the general principle of the prohibition of greater deviation and to harmonize acting and newly introduced standards within frameworks of modern ideology and methods of HS of harmful substances. This opens up broad prospects for the new phase of HS and a significant increase in the reliability of results obtained by the various methods and in different laboratories.

  17. Enhancement of CLAIM (clinical accounting information) for a localized Chinese version.

    PubMed

    Guo, Jinqiu; Takada, Akira; Niu, Tie; He, Miao; Tanaka, Koji; Sato, Junzo; Suzuki, Muneou; Takahashi, Kiwamu; Daimon, Hiroyuki; Suzuki, Toshiaki; Nakashima, Yusei; Araki, Kenji; Yoshihara, Hiroyuki

    2005-10-01

    CLinical Accounting InforMation (CLAIM) is a standard for the exchange of data between patient accounting systems and electronic medical record (EMR) systems. It uses eXtensible Markup Language (XML) as a meta-language and was developed in Japan. CLAIM is subordinate to the Medical Markup Language (MML) standard, which allows the exchange of medical data between different medical institutions. It has inherited the basic structure of MML 2.x and the current version, version 2.1, contains two modules and nine data definition tables. In China, no data exchange standard yet exists that links EMR systems to accounting systems. Taking advantage of CLAIM's flexibility, we created a localized Chinese version based on CLAIM 2.1. Since Chinese receipt systems differ from those of Japan, some information such as prescription formats, etc. are also different from those in Japan. Two CLAIM modules were re-engineered and six data definition tables were either added or redefined. The Chinese version of CLAIM takes local needs into account, and consequently it is now possible to transfer data between the patient accounting systems and EMR systems of Chinese medical institutions effectively.

  18. Preliminary study to develop standard acceptance tests for pervious concrete.

    DOT National Transportation Integrated Search

    2017-05-01

    Pervious concrete pavements are permeable pavement systems that are desired for their role in stormwater management and runoff control. Increased popularity in pervious concrete pavement applications has raised the need for the development of quality...

  19. Factors influencing nurses' decisions to raise concerns about care quality.

    PubMed

    Attree, Moira

    2007-05-01

    To explore factors that influence nurses' decisions to raise concerns about standards of practice. Health care practitioners have a key role in monitoring care quality. Nurses are required by their professional body to raise concerns about standards; however, under-reporting is the norm. Grounded theory was used to collect and analyse data from semi-structured interviews with 142 practising nurses, theoretically sampled from three Acute NHS Trusts in England. Fear of repercussions, retribution, labelling and blame for raising concerns, about which they predicted nothing would be done, were identified as disincentives to raising concerns. Reporting was perceived as a high-risk:low-benefit action. Nurses lacked confidence in reporting systems. Disincentives to reporting need to be addressed if an open culture, which promotes quality, safety and learning, is to be developed. Findings give cause for concern and indicate a need to review organizational and professional guidelines, and organizational reporting systems.

  20. Quicksilver: Middleware for Scalable Self-Regenerative Systems

    DTIC Science & Technology

    2006-04-01

    Applications can be coded in any of about 25 programming languages ranging from the obvious ones to some very obscure languages , such as OCaml ...technology. Like Tempest, Quicksilver can support applications written in any of a wide range of programming languages supported by .NET. However, whereas...so that developers can work in standard languages and with standard tools and still exploit those solutions. Vendors need to see some success

  1. Defense Facility Condition: Revised Guidance Needed to Improve Oversight of Assessments and Ratings

    DTIC Science & Technology

    2016-06-01

    are to implement the standardized process in part by assessing the condition of buildings, pavement , and rail using the same set of software tools...facility to current standards; costs for labor, equipment, materials, and currency exchange rates overseas; costs for project planning and design ...example, the services are to assess the condition of buildings, pavement , and rail using Sustainment Management System software tools developed by the

  2. Imminent Danger Pay: Actions Needed Regarding Pay Designations in the U.S. Central Command Area of Responsibility

    DTIC Science & Technology

    2014-01-30

    results of previous audits conducted on the data systems 1The source of this review is the Senate...locations within the CENTCOM area of responsibility. We conducted this performance audit from December 2012 to January 2014 in accordance with...generally accepted government auditing standards. Those standards require that we plan and perform the audit to obtain sufficient, appropriate evidence to

  3. A Greenhouse-Gas Information System: Monitoring and Validating Emissions Reporting and Mitigation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jonietz, Karl K.; Dimotakis, Paul E.; Rotman, Douglas A.

    2011-09-26

    This study and report focus on attributes of a greenhouse-gas information system (GHGIS) needed to support MRV&V needs. These needs set the function of such a system apart from scientific/research monitoring of GHGs and carbon-cycle systems, and include (not exclusively): the need for a GHGIS that is operational, as required for decision-support; the need for a system that meets specifications derived from imposed requirements; the need for rigorous calibration, verification, and validation (CV&V) standards, processes, and records for all measurement and modeling/data-inversion data; the need to develop and adopt an uncertainty-quantification (UQ) regimen for all measurement and modeling data; andmore » the requirement that GHGIS products can be subjected to third-party questioning and scientific scrutiny. This report examines and assesses presently available capabilities that could contribute to a future GHGIS. These capabilities include sensors and measurement technologies; data analysis and data uncertainty quantification (UQ) practices and methods; and model-based data-inversion practices, methods, and their associated UQ. The report further examines the need for traceable calibration, verification, and validation processes and attached metadata; differences between present science-/research-oriented needs and those that would be required for an operational GHGIS; the development, operation, and maintenance of a GHGIS missions-operations center (GMOC); and the complex systems engineering and integration that would be required to develop, operate, and evolve a future GHGIS.« less

  4. Electrical system options for space exploration

    NASA Technical Reports Server (NTRS)

    Bercaw, Robert W.; Cull, Ronald C.

    1991-01-01

    The need for a space power utility concept is discussed and the impact of this concept on the engineering of space power systems is examined. Experiences gained from Space Station Freedom and SEI systems studies are used to discuss the factors that may affect the choice of frequency standards on which to build such a space power utility. Emphasis is given to electrical power control, conditioning, and distribution subsystems.

  5. Digital document imaging systems: An overview and guide

    NASA Technical Reports Server (NTRS)

    1990-01-01

    This is an aid to NASA managers in planning the selection of a Digital Document Imaging System (DDIS) as a possible solution for document information processing and storage. Intended to serve as a manager's guide, this document contains basic information on digital imaging systems, technology, equipment standards, issues of interoperability and interconnectivity, and issues related to selecting appropriate imaging equipment based upon well defined needs.

  6. PRA and Risk Informed Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bernsen, Sidney A.; Simonen, Fredric A.; Balkey, Kenneth R.

    2006-01-01

    The Boiler and Pressure Vessel Code (BPVC) of the American Society of Mechanical Engineers (ASME) has introduced a risk based approach into Section XI that covers Rules for Inservice Inspection of Nuclear Power Plant Components. The risk based approach requires application of the probabilistic risk assessments (PRA). Because no industry consensus standard existed for PRAs, ASME has developed a standard to evaluate the quality level of an available PRA needed to support a given risk based application. The paper describes the PRA standard, Section XI application of PRAs, and plans for broader applications of PRAs to other ASME nuclear codesmore » and standards. The paper addresses several specific topics of interest to Section XI. Important consideration are special methods (surrogate components) used to overcome the lack of PRA treatments of passive components in PRAs. The approach allows calculations of conditional core damage probabilities both for component failures that cause initiating events and failures in standby systems that decrease the availability of these systems. The paper relates the explicit risk based methods of the new Section XI code cases to the implicit consideration of risk used in the development of Section XI. Other topics include the needed interactions of ISI engineers, plant operating staff, PRA specialists, and members of expert panels that review the risk based programs.« less

  7. Information Security Management - Part Of The Integrated Management System

    NASA Astrophysics Data System (ADS)

    Manea, Constantin Adrian

    2015-07-01

    The international management standards allow their integrated approach, thereby combining aspects of particular importance to the activity of any organization, from the quality management systems or the environmental management of the information security systems or the business continuity management systems. Although there is no national or international regulation, nor a defined standard for the Integrated Management System, the need to implement an integrated system occurs within the organization, which feels the opportunity to integrate the management components into a cohesive system, in agreement with the purpose and mission publicly stated. The issues relating to information security in the organization, from the perspective of the management system, raise serious questions to any organization in the current context of electronic information, reason for which we consider not only appropriate but necessary to promote and implement an Integrated Management System Quality - Environment - Health and Operational Security - Information Security

  8. [European standardization and German language adaptation of scales for collection of outcomes and costs of treatment for patients with severe mental disorders].

    PubMed

    Kilian, R; Roick, C; Bernert, S; Mory, C; Matschinger, H; Becker, T; Angermeyer, M C

    2001-03-01

    For the evaluation of the effectiveness of psychiatric service systems internationally standardised instruments for the assessment of the outcome and the costs of psychiatric and psychosocial treatment and care are increasingly needed. Beside the measurement of objective facts there is a growing importance of the consideration of the subjective perspective of patients and relatives. In the research project "Cost-effectiveness analysis of psychiatric service systems in the European comparison" of the Research association for Public Health in Saxony, developments were worked out, in close cooperation with the BIOMED-2 project "European Psychiatric Services: Inputs Linked to Outcome Domains and Needs", German versions of five European standardized instruments for the assessment of needs for care, treatment satisfaction, burden of care on relatives, quality of life and service costs. The psychometric properties of the instruments were tested within the framework of a longitudinal study with 307 patients with the diagnosis of schizophrenia. As a result of this study, German versions of all relevant European instruments for psychiatric service evaluation are now available.

  9. Why decision support systems are important for medical education.

    PubMed

    Konstantinidis, Stathis Th; Bamidis, Panagiotis D

    2016-03-01

    During the last decades, the inclusion of digital tools in health education has rapidly lead to a continuously enlarging digital era. All the online interactions between learners and tutors, the description, creation, reuse and sharing of educational digital resources and the interlinkage between them in conjunction with cheap storage technology has led to an enormous amount of educational data. Medical education is a unique type of education due to accuracy of information needed, continuous changing competences required and alternative methods of education used. Nowadays medical education standards provide the ground for organising the educational data and the paradata. Analysis of such education data through education data mining techniques is in its infancy, but decision support systems (DSSs) for medical education need further research. To the best of our knowledge, there is a gap and a clear need for identifying the challenges for DSSs in medical education in the era of medical education standards. Thus, in this Letter the role and the attributes of such a DSS for medical education are delineated and the challenges and vision for future actions are identified.

  10. Fundamental Data Standards for Science Data System Interoperability and Data Correlation

    NASA Astrophysics Data System (ADS)

    Hughes, J. Steven; Gopala Krishna, Barla; Rye, Elizabeth; Crichton, Daniel

    The advent of the Web and languages such as XML have brought an explosion of online science data repositories and the promises of correlated data and interoperable systems. However there have been relatively few successes in meeting the expectations of science users in the internet age. For example a Google-like search for images of Mars will return many highly-derived and appropriately tagged images but largely ignore the majority of images in most online image repositories. Once retrieved, users are further frustrated by poor data descriptions, arcane formats, and badly organized ancillary information. A wealth of research indicates that shared information models are needed to enable system interoperability and data correlation. However, at a more fundamental level, data correlation and system interoperability are dependant on a relatively few shared data standards. A com-mon data dictionary standard, for example, allows the controlled vocabulary used in a science repository to be shared with potential collaborators. Common data registry and product iden-tification standards enable systems to efficiently find, locate, and retrieve data products and their metadata from remote repositories. Information content standards define categories of descriptive data that help make the data products scientifically useful to users who were not part of the original team that produced the data. The Planetary Data System (PDS) has a plan to move the PDS to a fully online, federated system. This plan addresses new demands on the system including increasing data volume, numbers of missions, and complexity of missions. A key component of this plan is the upgrade of the PDS Data Standards. The adoption of the core PDS data standards by the International Planetary Data Alliance (IPDA) adds the element of international cooperation to the plan. This presentation will provide an overview of the fundamental data standards being adopted by the PDS that transcend science domains and that will help to meet the PDS's and IPDA's system interoperability and data correlation requirements.

  11. Meeting ACGME Standards Under a Unified Accreditation System: Challenges for Osteopathic Graduate Medical Education Programs.

    PubMed

    Cummings, Mark

    2017-07-01

    In 2014, the American Osteopathic Association (AOA) and the American Association of Colleges of Osteopathic Medicine signed a memorandum of understanding (MOU) with the Accreditation Council for Graduate Medical Education (ACGME) to create a unified accreditation system for graduate medical education (GME) under the ACGME. The AOA will cease to accredit GME programs on June 30, 2020. By then, AOA-accredited programs need to apply for and achieve ACGME initial accreditation. The terms of the MOU also made it advantageous for some formerly nonteaching hospitals to establish AOA programs, chiefly in primary care, as a step toward future ACGME accreditation.In transitioning AOA programs to the ACGME system, hospitals with osteopathic GME can expect to encounter challenges related to major differences between AOA and ACGME standards. The minimum numbers of residents for ACGME programs in most specialties are greater than those for AOA programs, which will require hospitals that may already be at their federal caps to add additional residency positions. ACGME standards are also more faculty- and staff-intensive and require additional infrastructure, necessitating additional financial investments. In addition, greater curricular specificity in ACGME standards will generate new educational and financial challenges.To address these challenges, hospitals may need to reallocate resources and positions among their current AOA programs, reducing the number of programs (and specialties) they sponsor. It is expected that a number of established and new AOA programs will choose not to pursue ACGME accreditation or will fail to qualify for ACGME initial accreditation.

  12. A Low Cost Ferritic Stainless Steel Microalloyed by Higher Nb for Automotive Exhaust System

    NASA Astrophysics Data System (ADS)

    Chen, Erhu; Wang, Xuelin; Shang, Chengjia

    Automotive engine exhaust gas after combustion of fuel, and the gas will be liquefied in the rear of automotive exhaust system. A lot of corrosive anions existing in the condensate make corrosion of the exhaust system materials. Therefore, once pitting perforation, automotive exhaust system will fail directly. In 1980s, automotive exhaust manifold was made of Si-Mo ductile iron, mufflers and the tail pipe were made of carbon steel or aluminized steel. But with higher emission standards carried out, the improvement of engine performance and the higher exhaust temperature as well as the needs of the automotive light-weighting, we need the higher corrosion resistance of the material for automotive exhaust systems to meet the requirements.

  13. NASA's Man-Systems Integration Standards: A Human Factors Engineering Standard for Everyone in the Nineties

    NASA Technical Reports Server (NTRS)

    Booher, Cletis R.; Goldsberry, Betty S.

    1994-01-01

    During the second half of the 1980s, a document was created by the National Aeronautics and Space Administration (NASA) to aid in the application of good human factors engineering and human interface practices to the design and development of hardware and systems for use in all United States manned space flight programs. This comprehensive document, known as NASA-STD-3000, the Man-Systems Integration Standards (MSIS), attempts to address, from a human factors engineering/human interface standpoint, all of the various types of equipment with which manned space flight crew members must deal. Basically, all of the human interface situations addressed in the MSIS are present in terrestrially based systems also. The premise of this paper is that, starting with this already created standard, comprehensive documents addressing human factors engineering and human interface concerns could be developed to aid in the design of almost any type of equipment or system which humans interface with in any terrestrial environment. Utilizing the systems and processes currently in place in the MSIS Development Facility at the Johnson Space Center in Houston, TX, any number of MSIS volumes addressing the human factors / human interface needs of any terrestrially based (or, for that matter, airborne) system could be created.

  14. Risk Analysis as Regulatory Science: Toward The Establishment of Standards

    PubMed Central

    Murakami, Michio

    2016-01-01

    Understanding how to establish standards is essential for risk communication and also provides perspectives for further study. In this paper, the concept of risk analysis as regulatory science for the establishment of standards is demonstrated through examples of standards for evacuation and provisional regulation values in foods and drinking water. Moreover, academic needs for further studies related to standards are extracted. The concepts of the traditional ‘Standard I’, which has a paternalistic orientation, and ‘Standard II’, established through stakeholder consensus, are then systemized by introducing the current status of the new standards-related movement that developed after the Fukushima nuclear power plant accident, and the perspectives of the standards are discussed. Preparation of standards on the basis of stakeholder consensus through intensive risk dialogue before a potential nuclear power plant accident is suggested to be a promising approach to ensure a safe society and enhance subjective well-being. PMID:27475751

  15. Risk Analysis as Regulatory Science: Toward The Establishment of Standards.

    PubMed

    Murakami, Michio

    2016-09-01

    Understanding how to establish standards is essential for risk communication and also provides perspectives for further study. In this paper, the concept of risk analysis as regulatory science for the establishment of standards is demonstrated through examples of standards for evacuation and provisional regulation values in foods and drinking water. Moreover, academic needs for further studies related to standards are extracted. The concepts of the traditional 'Standard I', which has a paternalistic orientation, and 'Standard II', established through stakeholder consensus, are then systemized by introducing the current status of the new standards-related movement that developed after the Fukushima nuclear power plant accident, and the perspectives of the standards are discussed. Preparation of standards on the basis of stakeholder consensus through intensive risk dialogue before a potential nuclear power plant accident is suggested to be a promising approach to ensure a safe society and enhance subjective well-being. © The Author 2016. Published by Oxford University Press.

  16. Geomatics Education: Need Assessment

    NASA Astrophysics Data System (ADS)

    Vyas, A.

    2014-11-01

    Education system is divided in to two classes: formal and informal. Formal education establishes the basis of theory and practical learning whereas informal education is largely self-learning, learning from real world projects. Generally science and technology streams require formal method of education. The social and related aspects can be taught through the other methods. Education is a media through which the foundation of the knowledge and skill is built. The statistics reveals the increase in the trend of the literate population. This may be accounted due to the level of urbanization and migration to the cities in search for the "white-collar jobs". As a result, a shift in the employment structure is observed from a primary sector to a secondary and tertiary sector. Thomas Friedman in his book `The World is Flat' quotes the impact of globalization on adaptation of science and technology, the world has become large to tiny. One of the technologies to mention here is geospatial technology. With the advancement in the satellite remote sensing, geographical information system, global positioning system, the database management system has become important subject areas. The countries are accounting hugh budget on the space technology, which includes education, training and research. Today many developing countries do not have base maps, they are lacking in the systemic data and record keeping, which are essential for governance, decision making and other development purpose. There is no trained manpower available. There is no standard hardware and software identified. An imbalance is observed when the government is promoting the use of geospatial technology, there is no trained manpower nor the availability of the experts to review the accurateness of the spatial data developed. There are very few universities which impart the degree level education, there are very few trained faculty members who give standard education, there exists a lack of standard syllabus. On the other hand, the industry requires high skilled manpower, high experienced manpower. This is a low equilibrium situation. Since the need is enhancing day by day, the shortage of the skilled manpower is increasing, the need of the geomatics education emerges. This paper researches on the need assessment of the education in geospatial specialization. It emphasises on the challenges and issues prevail in geospatial education and in the specialized fields of remote sensing and GIS. This paper analyse the need assessment through all the three actors: government, geospatial industry and education institutions.

  17. Cancer control needs of 2-1-1 callers in Missouri, North Carolina, Texas, and Washington.

    PubMed

    Purnell, Jason Q; Kreuter, Matthew W; Eddens, Katherine S; Ribisl, Kurt M; Hannon, Peggy; Williams, Rebecca S; Fernandez, Maria E; Jobe, David; Gemmel, Susan; Morris, Marti; Fagin, Debbie

    2012-05-01

    Innovative interventions are needed to connect underserved populations to cancer control services. With data from Missouri, North Carolina, Texas, and Washington this study a) estimated the cancer control needs of callers to 2-1-1, an information and referral system used by underserved populations, b) compared rates of need with state and national data, and c) examined receptiveness to needed referrals. From October 2009 to March 2010 callers' (N=1,408) cancer control needs were assessed in six areas: breast, cervical, and colorectal cancer screening, HPV vaccination, smoking, and smoke-free homes using Behavioral Risk Factor Surveillance System (BRFSS) survey items. Standardized estimates were compared with state and national rates. Nearly 70% of the sample had at least one cancer control need. Needs were greater for 2-1-1 callers than for state and national rates, and callers were receptive to referrals. 2-1-1 could be a key partner in efforts to reduce cancer disparities.

  18. Mapping the route to medication therapy management documentation and billing standardization and interoperabilility within the health care system: meeting proceedings.

    PubMed

    Millonig, Marsha K

    2009-01-01

    To convene a diverse group of stakeholders to discuss medication therapy management (MTM) documentation and billing standardization and its interoperability within the health care system. More than 70 stakeholders from pharmacy, health information systems, insurers/payers, quality, and standard-setting organizations met on October 7-8, 2008, in Bethesda, MD. The American Pharmacists Association (APhA) organized the invitational conference to facilitate discussion on strategic directions for meeting current market need for MTM documentation and billing interoperability and future market needs for MTM integration into electronic health records (EHRs). APhA recently adopted policy that specifically addresses technology barriers and encourages the use and development of standardized systems for the documentation and billing of MTM services. Day 1 of the conference featured six foundational presentations on health information technology (HIT) trends, perspectives on MTM from the profession and the Centers for Medicare & Medicaid Services, health care quality and medication-related outcome measures, integrating MTM workflow in EHRs, and the current state of MTM operalization in practice. After hearing presentations on day 1 and having the opportunity to pose questions to each speaker, conference participants were divided into three breakout groups on day 2. Each group met three times for 60 minutes each and discussed five questions from the perspective of a patient, provider, or payer. Three facilitators met with each of the groups and led discussion from one perspective (i.e., patient, provider, payer). Participants then reconvened as a complete group to participate in a discussion on next steps. HIT is expected to assist in delivering safe, effective, efficient, coordinated care as health professionals strive to improve the quality of care and outcomes for individual patients. The pharmacy profession is actively contributing to quality patient care through MTM services focused on identifying and preventing medication-related problems, improving medication use, and optimizing individual therapeutic outcomes. As MTM programs continue to expand within the health care system, one important limiting factor is the lack of standardization for documentation and billing of MTM services. This lack of interoperability between technology systems, software, and system platforms is presenting as a barrier to MTM service delivery for patients. APhA convened this invitational conference to identify strategic directions to address MTM documentation and billing standardization and interoperability. Participants viewed the meeting as highly successful in bringing together a unique, wide-ranging set of stakeholders, including the government, regulators, standards organizations, other health professions, technology firms, professional organizations, and practitioners, to share perspectives. They strongly encouraged the Association to continue this unique stakeholder dialogue. Participants provided a number of next-step suggestions for APhA to consider because of the event. Participants noted the pharmacy profession's success in building information technology systems for product transactions with systematic, organized, methodical thinking and the need to apply this success to patient services. A unique opportunity exists for the profession to influence and lead the HIT community in creating a workable health technology solution for MTM services. Reaching consensus on minimum data sets for each functional area--clinical, billing, quality improvement--would be a very important short-term gain. Further, participants said it was imperative for pharmacists and the pharmacy community at large to become actively engaged in HIT standards development efforts.

  19. Software archeology: a case study in software quality assurance and design

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Macdonald, John M; Lloyd, Jane A; Turner, Cameron J

    2009-01-01

    Ideally, quality is designed into software, just as quality is designed into hardware. However, when dealing with legacy systems, demonstrating that the software meets required quality standards may be difficult to achieve. As the need to demonstrate the quality of existing software was recognized at Los Alamos National Laboratory (LANL), an effort was initiated to uncover and demonstrate that legacy software met the required quality standards. This effort led to the development of a reverse engineering approach referred to as software archaeology. This paper documents the software archaeology approaches used at LANL to document legacy software systems. A case studymore » for the Robotic Integrated Packaging System (RIPS) software is included.« less

  20. Experienced and less-experienced nurses' diagnostic reasoning: implications for fostering students' critical thinking.

    PubMed

    Ferrario, Catherine G

    2003-01-01

    To compare the use of mental representations (heuristics) in diagnostic reasoning of expert (> or = 5 years' experience) and novice (< 5 years' experience) emergency nurses. Clinical simulations were completed by a nationwide randomly selected sample of 173 experienced and 46 less-experienced emergency nurses (N = 219). Experienced nurses used the heuristic, Judging by Causal Systems (diagnostic inferences deduced from systems of causal factors) significantly more did than less-experienced nurses. Standardized nursing diagnoses may cut short the time needed to develop representational thinking and spare cognitive reserves for reasoning needed for complex patients. Faculty need to promote student's cognitive development through strategies that promote active, reflective, and integrative learning.

  1. A Platform for Innovation and Standards Evaluation: a Case Study from the OpenMRS Open-Source Radiology Information System.

    PubMed

    Gichoya, Judy W; Kohli, Marc; Ivange, Larry; Schmidt, Teri S; Purkayastha, Saptarshi

    2018-05-10

    Open-source development can provide a platform for innovation by seeking feedback from community members as well as providing tools and infrastructure to test new standards. Vendors of proprietary systems may delay adoption of new standards until there are sufficient incentives such as legal mandates or financial incentives to encourage/mandate adoption. Moreover, open-source systems in healthcare have been widely adopted in low- and middle-income countries and can be used to bridge gaps that exist in global health radiology. Since 2011, the authors, along with a community of open-source contributors, have worked on developing an open-source radiology information system (RIS) across two communities-OpenMRS and LibreHealth. The main purpose of the RIS is to implement core radiology workflows, on which others can build and test new radiology standards. This work has resulted in three major releases of the system, with current architectural changes driven by changing technology, development of new standards in health and imaging informatics, and changing user needs. At their core, both these communities are focused on building general-purpose EHR systems, but based on user contributions from the fringes, we have been able to create an innovative system that has been used by hospitals and clinics in four different countries. We provide an overview of the history of the LibreHealth RIS, the architecture of the system, overview of standards integration, describe challenges of developing an open-source product, and future directions. Our goal is to attract more participation and involvement to further develop the LibreHealth RIS into an Enterprise Imaging System that can be used in other clinical imaging including pathology and dermatology.

  2. Approaches to Privacy and Security in Computer Systems. Publication No. 404.

    ERIC Educational Resources Information Center

    Renninger, Clark R., Ed.

    A conference was held at the National Bureau of Standards on March 4-5, 1974 to continue the dialogue in search of ways to protect confidential information in computer systems. Proposals were presented for meeting governmental needs in safeguarding individual privacy and data confidentiality that were identified at a conference held in November…

  3. [Analysis medical staff opinion according to quality management in health care].

    PubMed

    Łopacińska, Iwona

    2012-10-01

    The practice of documenting the credibility of quality management system of companies in the medical sector in Poland does not have a long history. In the recent years hospitals have started to work in a system similar to a competitive market with features specific for medical service preserved. As a result quality focused activity instruments were introduced to the medical service market, such as ISO family of standards. The aim of the work objective was to get to know the opinion of medical staff about the changes resulting in the quality management system implementation. The answers of a team of 200 medical staff from two Polish hospitals were analysed. The respondents were employed in medical institutions before and after the introduction of ISO 9001. A large number of participants claimed that standardization in work organization made a significant improvement (45.50%, n = 91), but part of them (36.50%, n = 73) claimed that this new organization improved the situation not very much. And a small group (18,00%, n = 36) said that the organization did not change after the introduction of standardization. Nurses and medical rescue workers more often claimed (the result being statistically significant) that their work organization improved after the standardization implementation (48.54%), differently from doctors (27.59%, p = 0.008). Doctors in the research often claimed that the changes after the introduction of standardization caused an increase in the requirements of their professional qualifications (79.13%), but the nurses and medical rescue workers found it a bit less (74.85%). Most participants (87.50%, n = 175) claimed that the changes which appeared as a result of the introduction of standardization motivated them to compete against others health care institutions. Medical staff in the research claimed that the changes after the introduction of standardization resulted in work organization improvement. Nurses and medical rescue workers more often claimed (the result being statistically significant) that their work organization improved after the standard implementation. Most of the respondents were convinced about the benefits of standardization implementation. Changes that took place as a result of the introduction of quality management system based on ISO are a motivating factor for competing against other health care institutions. The system of quality insurance based on ISO is constructed in such a way so as to strive for satisfying constantly changing customers' needs, because quality is not an ideal notion but a goal that needs to be pursued.

  4. Development and Application of an Integrated Approach toward NASA Airspace Systems Research

    NASA Technical Reports Server (NTRS)

    Barhydt, Richard; Fong, Robert K.; Abramson, Paul D.; Koenke, Ed

    2008-01-01

    The National Aeronautics and Space Administration's (NASA) Airspace Systems Program is contributing air traffic management research in support of the 2025 Next Generation Air Transportation System (NextGen). Contributions support research and development needs provided by the interagency Joint Planning and Development Office (JPDO). These needs generally call for integrated technical solutions that improve system-level performance and work effectively across multiple domains and planning time horizons. In response, the Airspace Systems Program is pursuing an integrated research approach and has adapted systems engineering best practices for application in a research environment. Systems engineering methods aim to enable researchers to methodically compare different technical approaches, consider system-level performance, and develop compatible solutions. Systems engineering activities are performed iteratively as the research matures. Products of this approach include a demand and needs analysis, system-level descriptions focusing on NASA research contributions, system assessment and design studies, and common systemlevel metrics, scenarios, and assumptions. Results from the first systems engineering iteration include a preliminary demand and needs analysis; a functional modeling tool; and initial system-level metrics, scenario characteristics, and assumptions. Demand and needs analysis results suggest that several advanced concepts can mitigate demand/capacity imbalances for NextGen, but fall short of enabling three-times current-day capacity at the nation s busiest airports and airspace. Current activities are focusing on standardizing metrics, scenarios, and assumptions, conducting system-level performance assessments of integrated research solutions, and exploring key system design interfaces.

  5. Identification and comprehension of symbolic exit signs for small transport-category airplanes.

    DOT National Transportation Integrated Search

    2014-02-01

    Global growth in travel has resulted in the need to standardize safety information and guidance systems : for communication of significant information to the widest audience possible. Through uniform design and : common visual components, persons in ...

  6. Smart sign ordering system : research implementation plan.

    DOT National Transportation Integrated Search

    2004-05-01

    STATEMENT OF NEED: ODOT operates a Sign Shop to fabricate traffic and information signs. The Districts prepare and submit orders for : signs to the Central Office, where each order is checked against design specifications and standards. The Sign Shop...

  7. [Laboratory accreditation and proficiency testing].

    PubMed

    Kuwa, Katsuhiko

    2003-05-01

    ISO/TC 212 covering clinical laboratory testing and in vitro diagnostic test systems will issue the international standard for medical laboratory quality and competence requirements, ISO 15189. This standard is based on the ISO/IEC 17025, general requirements for competence of testing and calibration laboratories and ISO 9001, quality management systems-requirements. Clinical laboratory services are essential to patient care and therefore should be available to meet the needs of all patients and clinical personnel responsible for human health care. If a laboratory seeks accreditation, it should select an accreditation body that operates according to this international standard and in a manner which takes into account the particular requirements of clinical laboratories. Proficiency testing should be available to evaluate the calibration laboratories and reference measurement laboratories in clinical medicine. Reference measurement procedures should be of precise and the analytical principle of measurement applied should ensure reliability. We should be prepared to establish a quality management system and proficiency testing in clinical laboratories.

  8. Developing an Android-Based Patient Decision Aid Based on Ottawa Standards for Patients After Kidney Transplant and Its Usability Evaluation.

    PubMed

    Zare Moayedi, Mahboobeh; Aslani, Azam; Fakhrahmad, Mostafa; Ezzatzadegan J, Shahrokh

    2018-01-01

    This study was conducted to develop an android based patient decision aid (PDA) as a self-care instrument for patients after kidney transplant and its usability evaluation. In this study, the systematic development process of Android-based self-care application for patients after kidney transplant based on Ottawa standard was included: scoping, assemble steering group, analysis of requirements, designing, develop of a prototype and system evaluation. The PDA is a self-triage system that will help early identification of risk symptoms in patients, and help manage them. System recommendations for risk signs are: Refer to the nearest hospital or healthcare center without delay, refer to the doctor and tell your doctor in the next visit. To identify patient care needs, a semi-structured interview with members of steering group, including patients and clinical experts, was conducted by the researchers. A prototype of the decision aid was made according to identified needs in the previous step. Finally, in order to evaluate its usability rate by using the System Usability Scale (SUS) questionnaire, it was used by exerts and patients. This study identified information needs, risk signs and steps that patients need to make appropriate decisions about them. The main capabilities of the decision aid are features such as reminders for appointment/test, time of taking medication, registration of symptoms, weight, blood pressure, body temperature, advising to patient in case of signs of risk, weight, blood pressure, body temperature and test results which were reported in the diagram. The mean score of system's usability evaluated by medical informatics specialists, clinicians, and patients were 88.33, 95, and 91. PDAs was usable and desirable from the point of view of medical informatics specialists, clinicians and patients.

  9. Creating and Implementing a Regularized Monitoring and EnforcementSystem for China's Mandatory Standards and Energy Information Label forAppliances

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lin, Jiang

    2007-03-01

    China has developed a comprehensive program of energy efficiency standards and labels for household appliances. In 1989, China first launched its minimum energy performance standards (MEPS), which are now applied to an extensive list of products. In 1998, China launched a voluntary energy endorsement label, which has grown to cover both energy-saving and water-saving products. And, in 2005, China launched a mandatory energy information label that initially covered two products. CLASP has assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; televisions; printers; computers; monitors; faxmore » machines; copiers; DVD/VCD players; external power supplies; and set-top boxes. CLASP has also assisted China in the development of the mandatory energy information label. Increasingly, attention is being placed on maximum energy savings from China's standards and labeling (S&L) efforts in order to meet the recently announced goal of reducing China's energy intensity by 20 percent by 2010 with an interim objective of 4 percent in 2006. China's mandatory standards system is heavily focused on the technical requirements for efficiency performance, but historically, it has lacked administrative and personnel capacity to undertake monitoring and enforcement of these legally binding standards. Similarly, resources for monitoring and enforcement have been quite limited. As a consequence, compliance to both the mandatory standards and the mandatory energy information label is uneven with the potential and likely result of lost energy savings. Thus, a major area for improvement, which could significantly increase overall energy savings, is the creation and implementation of a regularized monitoring system for tracking the compliance to, and enforcement of, mandatory standards and the energy information label in China. CLASP has been working with the China National Institute of Standardization (CNIS), the China Administration for Quality, Supervision, Inspection and Quarantine (AQSIQ) and relevant stakeholders in the industry to develop a stronger system of monitoring and enforcement. In November 2005, CNIS and LBNL (a CLASP implementing partner) with funding from the Energy Foundation jointly organized an international workshop to present the international best practices in S&L monitoring and enforcement. Currently, CNIS is developing a guideline for monitoring and enforcement for appliance standards. With support from METI, CLASP has been able to expand the on-going collaboration with CNIS to include enforcement needs for the mandatory energy information label and to accelerate the progress of the project to develop a more robust monitoring and enforcement for S&L programs in China. This expanded effort has included: (1) Holding an enforcement and monitoring roadmap planning workshop with key S&L stakeholders; (2) Interviews with S&L stakeholders on the need and scope of national compliance tests; (3) Research on past enforcement activities; (4) An analysis of compliance data from the mandatory energy information labeling program; (5) Interviews with stakeholders on the need and scope of testing infrastructure; and (6) Development of a roadmap for future activities. This report summarizes the findings of these activities and identifies the progress that China is making, and can make, toward developing a stronger system of monitoring and enforcement (M&E). In sum, it outlines a vision of moving forward with more vigorous M&E in China.« less

  10. Reuse and Interoperability of Avionics for Space Systems

    NASA Technical Reports Server (NTRS)

    Hodson, Robert F.

    2007-01-01

    The space environment presents unique challenges for avionics. Launch survivability, thermal management, radiation protection, and other factors are important for successful space designs. Many existing avionics designs use custom hardware and software to meet the requirements of space systems. Although some space vendors have moved more towards a standard product line approach to avionics, the space industry still lacks similar standards and common practices for avionics development. This lack of commonality manifests itself in limited reuse and a lack of interoperability. To address NASA s need for interoperable avionics that facilitate reuse, several hardware and software approaches are discussed. Experiences with existing space boards and the application of terrestrial standards is outlined. Enhancements and extensions to these standards are considered. A modular stack-based approach to space avionics is presented. Software and reconfigurable logic cores are considered for extending interoperability and reuse. Finally, some of the issues associated with the design of reusable interoperable avionics are discussed.

  11. The Impact Of Multimode Fiber Chromatic Dispersion On Data Communications

    NASA Astrophysics Data System (ADS)

    Hackert, Michael J.

    1990-01-01

    Capability for the lowest cost is the goal of contemporary communications managers. With all of the competitive pressures that modern businesses are experiencing these days, communications needs must be met with the most information carrying capacity for the lowest cost. Optical fiber communication systems meet these requirements while providing reliability, system integrity, and potential future upgradability. Consequently, optical fiber is finding numerous applications in addition to its traditional telephony plant. Fiber based systems are meeting these requirements in building networks and computer interconnects at a lower cost than copper based systems. A fiber type being chosen by industry to meet these needs in standard systems such as FDDI, is multimode fiber. Multimode fiber systems offer cost advantages over single-mode fiber through lower fiber connection costs. Also, system designers can gain savings by using low cost, high reliability, wide spectral width sources such as LEDs instead of lasers and by operating at higher bit rates than used for multimode systems in the past. However, in order to maximize the cost savings while ensuring the system will operate as intended, the chromatic dispersion of the fiber must be taken into account. This paper explains how to do that and shows how to calculate multimode chromatic dispersion for each of the standard fiber sizes (50 μm, 62.5 μm, 85 μm, and 100μm core diameter).

  12. Integrating cancer genomic data into electronic health records.

    PubMed

    Warner, Jeremy L; Jain, Sandeep K; Levy, Mia A

    2016-10-26

    The rise of genomically targeted therapies and immunotherapy has revolutionized the practice of oncology in the last 10-15 years. At the same time, new technologies and the electronic health record (EHR) in particular have permeated the oncology clinic. Initially designed as billing and clinical documentation systems, EHR systems have not anticipated the complexity and variety of genomic information that needs to be reviewed, interpreted, and acted upon on a daily basis. Improved integration of cancer genomic data with EHR systems will help guide clinician decision making, support secondary uses, and ultimately improve patient care within oncology clinics. Some of the key factors relating to the challenge of integrating cancer genomic data into EHRs include: the bioinformatics pipelines that translate raw genomic data into meaningful, actionable results; the role of human curation in the interpretation of variant calls; and the need for consistent standards with regard to genomic and clinical data. Several emerging paradigms for integration are discussed in this review, including: non-standardized efforts between individual institutions and genomic testing laboratories; "middleware" products that portray genomic information, albeit outside of the clinical workflow; and application programming interfaces that have the potential to work within clinical workflow. The critical need for clinical-genomic knowledge bases, which can be independent or integrated into the aforementioned solutions, is also discussed.

  13. Measurement Science for Prognostics and Health Management for Smart Manufacturing Systems: Key Findings from a Roadmapping Workshop

    PubMed Central

    Weiss, Brian A.; Vogl, Gregory; Helu, Moneer; Qiao, Guixiu; Pellegrino, Joan; Justiniano, Mauricio; Raghunathan, Anand

    2017-01-01

    The National Institute of Standards and Technology (NIST) hosted the Roadmapping Workshop – Measurement Science for Prognostics and Health Management for Smart Manufacturing Systems (PHM4SMS) in Fall 2014 to discuss the needs and priorities of stakeholders in the PHM4SMS technology area. The workshop brought together over 70 members of the PHM community. The attendees included representatives from small, medium, and large manufacturers; technology developers and integrators; academic researchers; government organizations; trade associations; and standards bodies. The attendees discussed the current and anticipated measurement science challenges to advance PHM methods and techniques for smart manufacturing systems; the associated research and development needed to implement condition monitoring, diagnostic, and prognostic technologies within manufacturing environments; and the priorities to meet the needs of PHM in manufacturing. This paper will summarize the key findings of this workshop, and present some of the critical measurement science challenges and corresponding roadmaps, i.e., suggested courses of action, to advance PHM for manufacturing. Milestones and targeted capabilities will be presented for each roadmap across three areas: PHM Manufacturing Process Techniques; PHM Performance Assessment; and PHM Infrastructure – Hardware, Software, and Integration. An analysis of these roadmaps and crosscutting themes seen across the breakout sessions is also discussed. PMID:28664163

  14. ProCon - PROteomics CONversion tool.

    PubMed

    Mayer, Gerhard; Stephan, Christian; Meyer, Helmut E; Kohl, Michael; Marcus, Katrin; Eisenacher, Martin

    2015-11-03

    With the growing amount of experimental data produced in proteomics experiments and the requirements/recommendations of journals in the proteomics field to publicly make available data described in papers, a need for long-term storage of proteomics data in public repositories arises. For such an upload one needs proteomics data in a standardized format. Therefore, it is desirable, that the proprietary vendor's software will integrate in the future such an export functionality using the standard formats for proteomics results defined by the HUPO-PSI group. Currently not all search engines and analysis tools support these standard formats. In the meantime there is a need to provide user-friendly free-to-use conversion tools that can convert the data into such standard formats in order to support wet-lab scientists in creating proteomics data files ready for upload into the public repositories. ProCon is such a conversion tool written in Java for conversion of proteomics identification data into standard formats mzIdentML and Pride XML. It allows the conversion of Sequest™/Comet .out files, of search results from the popular and often used ProteomeDiscoverer® 1.x (x=versions 1.1 to1.4) software and search results stored in the LIMS systems ProteinScape® 1.3 and 2.1 into mzIdentML and PRIDE XML. This article is part of a Special Issue entitled: Computational Proteomics. Copyright © 2015. Published by Elsevier B.V.

  15. Hearing Device Manufacturers Call for Interoperability and Standardization of Internet and Audiology.

    PubMed

    Laplante-Lévesque, Ariane; Abrams, Harvey; Bülow, Maja; Lunner, Thomas; Nelson, John; Riis, Søren Kamaric; Vanpoucke, Filiep

    2016-10-01

    This article describes the perspectives of hearing device manufacturers regarding the exciting developments that the Internet makes possible. Specifically, it proposes to join forces toward interoperability and standardization of Internet and audiology. A summary of why such a collaborative effort is required is provided from historical and scientific perspectives. A roadmap toward interoperability and standardization is proposed. Information and communication technologies improve the flow of health care data and pave the way to better health care. However, hearing-related products, features, and services are notoriously heterogeneous and incompatible with other health care systems (no interoperability). Standardization is the process of developing and implementing technical standards (e.g., Noah hearing database). All parties involved in interoperability and standardization realize mutual gains by making mutually consistent decisions. De jure (officially endorsed) standards can be developed in collaboration with large national health care systems as well as spokespeople for hearing care professionals and hearing device users. The roadmap covers mutual collaboration; data privacy, security, and ownership; compliance with current regulations; scalability and modularity; and the scope of interoperability and standards. We propose to join forces to pave the way to the interoperable Internet and audiology products, features, and services that the world needs.

  16. Defense Health Care: DOD Is Meeting Most Mental Health Care Access Standards, but It Needs a Standard for Follow-up Appointments

    DTIC Science & Technology

    2016-04-01

    domestically and overseas. GAO analyzed recent, available data on MHS mental health utilization , staffing, and appointment access and compared... utilization of mental health treatment services in both the direct and purchased care systems by active duty servicemembers, including activated...reservists, from fiscal years 2009 to 2014.5 To determine the reliability of the utilization data, we reviewed relevant documentation, discussed this

  17. Can We Create a "Gold Standard of Education" for Our Children through the "Advancement via Independent Determination (AVID) Program"?

    ERIC Educational Resources Information Center

    Gaskins, Darlene

    2014-01-01

    We need to come together as a team and become one system of total quality improvement regarding the education of our nation's children. In order to achieve a gold standard in the education of our nation's children, leadership has to be willing to go against the status quo and build bridges for long-term sustainable change. In order to survive,…

  18. ADAPTION OF NONSTANDARD PIPING COMPONENTS INTO PRESENT DAY SEISMIC CODES

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    D. T. Clark; M. J. Russell; R. E. Spears

    2009-07-01

    With spiraling energy demand and flat energy supply, there is a need to extend the life of older nuclear reactors. This sometimes requires that existing systems be evaluated to present day seismic codes. Older reactors built in the 1960s and early 1970s often used fabricated piping components that were code compliant during their initial construction time period, but are outside the standard parameters of present-day piping codes. There are several approaches available to the analyst in evaluating these non-standard components to modern codes. The simplest approach is to use the flexibility factors and stress indices for similar standard components withmore » the assumption that the non-standard component’s flexibility factors and stress indices will be very similar. This approach can require significant engineering judgment. A more rational approach available in Section III of the ASME Boiler and Pressure Vessel Code, which is the subject of this paper, involves calculation of flexibility factors using finite element analysis of the non-standard component. Such analysis allows modeling of geometric and material nonlinearities. Flexibility factors based on these analyses are sensitive to the load magnitudes used in their calculation, load magnitudes that need to be consistent with those produced by the linear system analyses where the flexibility factors are applied. This can lead to iteration, since the magnitude of the loads produced by the linear system analysis depend on the magnitude of the flexibility factors. After the loading applied to the nonstandard component finite element model has been matched to loads produced by the associated linear system model, the component finite element model can then be used to evaluate the performance of the component under the loads with the nonlinear analysis provisions of the Code, should the load levels lead to calculated stresses in excess of Allowable stresses. This paper details the application of component-level finite element modeling to account for geometric and material nonlinear component behavior in a linear elastic piping system model. Note that this technique can be applied to the analysis of B31 piping systems.« less

  19. New Secure E-mail System Based on Bio-Chaos Key Generation and Modified AES Algorithm

    NASA Astrophysics Data System (ADS)

    Hoomod, Haider K.; Radi, A. M.

    2018-05-01

    The E-mail messages exchanged between sender’s Mailbox and recipient’s Mailbox over the open systems and insecure Networks. These messages may be vulnerable to eavesdropping and itself poses a real threat to the privacy and data integrity from unauthorized persons. The E-mail Security includes the following properties (Confidentiality, Authentication, Message integrity). We need a safe encryption algorithm to encrypt Email messages such as the algorithm Advanced Encryption Standard (AES) or Data Encryption Standard DES, as well as biometric recognition and chaotic system. The proposed E-mail system security uses modified AES algorithm and uses secret key-bio-chaos that consist of biometric (Fingerprint) and chaotic system (Lu and Lorenz). This modification makes the proposed system more sensitive and random. The execution time for both encryption and decryption of the proposed system is much less from original AES, in addition to being compatible with all Mail Servers.

  20. Building a biomedical cyberinfrastructure for collaborative research.

    PubMed

    Schad, Peter A; Mobley, Lee Rivers; Hamilton, Carol M

    2011-05-01

    For the potential power of genome-wide association studies (GWAS) and translational medicine to be realized, the biomedical research community must adopt standard measures, vocabularies, and systems to establish an extensible biomedical cyberinfrastructure. Incorporating standard measures will greatly facilitate combining and comparing studies via meta-analysis. Incorporating consensus-based and well-established measures into various studies should reduce the variability across studies due to attributes of measurement, making findings across studies more comparable. This article describes two well-established consensus-based approaches to identifying standard measures and systems: PhenX (consensus measures for phenotypes and eXposures), and the Open Geospatial Consortium (OGC). NIH support for these efforts has produced the PhenX Toolkit, an assembled catalog of standard measures for use in GWAS and other large-scale genomic research efforts, and the RTI Spatial Impact Factor Database (SIFD), a comprehensive repository of geo-referenced variables and extensive meta-data that conforms to OGC standards. The need for coordinated development of cyberinfrastructure to support measures and systems that enhance collaboration and data interoperability is clear; this paper includes a discussion of standard protocols for ensuring data compatibility and interoperability. Adopting a cyberinfrastructure that includes standard measures and vocabularies, and open-source systems architecture, such as the two well-established systems discussed here, will enhance the potential of future biomedical and translational research. Establishing and maintaining the cyberinfrastructure will require a fundamental change in the way researchers think about study design, collaboration, and data storage and analysis. Copyright © 2011 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  1. Establishing Recommendations for Stroke Systems in the Thrombectomy Era: The Upstate New York Stakeholder Proceedings.

    PubMed

    Magdon-Ismail, Zainab; Benesch, Curtis; Cushman, Jeremy T; Brissette, Ian; Southerland, Andrew M; Brandler, Ethan S; Sozener, Cemal B; Flor, Sue; Hemmitt, Roseanne; Wales, Kathleen; Parrigan, Krystal; Levine, Steven R

    2017-07-01

    The American Heart Association/American Stroke Association and Department of Health Stroke Coverdell Program convened a stakeholder meeting in upstate NY to develop recommendations to enhance stroke systems for acute large vessel occlusion. Prehospital, hospital, and Department of Health leadership were invited (n=157). Participants provided goals/concerns and developed recommendations for prehospital triage and interfacility transport, rating each using a 3-level impact (A [high], B, and C [low]) and implementation feasibility (1 [high], 2, and 3 [low]) scale. Six weeks later, participants finalized recommendations. Seventy-one stakeholders (45% of invitees) attended. Six themes around goals/concerns emerged: (1) emergency medical services capacity, (2) validated prehospital screening tools, (3) facility capability, (4) triage/transport guidelines, (5) data capture/feedback tools, and (6) facility competition. In response, high-impact (level A) prehospital recommendations, stratified by implementation feasibility, were (1) use of online medical control for triage (6%); (2) regional transportation strategy (31%), standardized emergency medical services checklists (18%), quality metrics (14%), standardized prehospital screening tools (13%), and feedback for performance improvement (7%); and (3) smartphone application algorithm for screening/decision-making (6%) and ambulance-based telemedicine (6%). Level A interfacility transfer recommendations were (1) standardized transfer process (32%)/timing goals (16%)/regionalized systems (11%), performance metrics (11%), image sharing capabilities (7%); (2) provider education (9%) and stroke toolbox (5%); and (3) interfacility telemedicine (7%) and feedback (2%). The methods used and recommendations generated provide models for stroke system enhancement. Implementation may vary based on geographic need/capacity and be contingent on establishing standard care practices. Further research is needed to establish optimal implementation strategies. © 2017 American Heart Association, Inc.

  2. Data storage and retrieval system abstract

    NASA Technical Reports Server (NTRS)

    Matheson, Barbara

    1992-01-01

    The STX mass storage system design is intended for environments requiring high speed access to large volumes of data (terabyte and greater). Prior to commitment to a product design plan, STX conducted an exhaustive study of the commercially available off-the-shelf hardware and software. STX also conducted research into the area of emerging technologies in networks and storage media so that the design could easily accommodate new interfaces and peripherals as they came on the market. All the selected system elements were brought together in a demo suite sponsored jointly by STX and ALLIANT where the system elements were evaluated based on actual operation using a client-server mirror image configuration. Testing was conducted to assess the various component overheads and results were compared against vendor data claims. The resultant system, while adequate to meet our capacity requirements, fell short of transfer speed expectations. A product team lead by STX was assembled and chartered with solving the bottleneck issues. Optimization efforts yielded a 60 percent improvement in throughput performance. The ALLIANT computer platform provided the I/O flexibility needed to accommodate a multitude of peripheral interfaces including the following: up to twelve 25MB/s VME I/O channels; up to five HiPPI I/O full duplex channels; IPI-s, SCSI, SMD, and RAID disk array support; standard networking software support for TCP/IP, NFS, and FTP; open architecture based on standard RISC processors; and V.4/POSIX-based operating system (Concentrix). All components including the software are modular in design and can be reconfigured as needs and system uses change. Users can begin with a small system and add modules as needed in the field. Most add-ons can be accomplished seamlessly without revision, recompilation or re-linking of software.

  3. Data storage and retrieval system abstract

    NASA Astrophysics Data System (ADS)

    Matheson, Barbara

    1992-09-01

    The STX mass storage system design is intended for environments requiring high speed access to large volumes of data (terabyte and greater). Prior to commitment to a product design plan, STX conducted an exhaustive study of the commercially available off-the-shelf hardware and software. STX also conducted research into the area of emerging technologies in networks and storage media so that the design could easily accommodate new interfaces and peripherals as they came on the market. All the selected system elements were brought together in a demo suite sponsored jointly by STX and ALLIANT where the system elements were evaluated based on actual operation using a client-server mirror image configuration. Testing was conducted to assess the various component overheads and results were compared against vendor data claims. The resultant system, while adequate to meet our capacity requirements, fell short of transfer speed expectations. A product team lead by STX was assembled and chartered with solving the bottleneck issues. Optimization efforts yielded a 60 percent improvement in throughput performance. The ALLIANT computer platform provided the I/O flexibility needed to accommodate a multitude of peripheral interfaces including the following: up to twelve 25MB/s VME I/O channels; up to five HiPPI I/O full duplex channels; IPI-s, SCSI, SMD, and RAID disk array support; standard networking software support for TCP/IP, NFS, and FTP; open architecture based on standard RISC processors; and V.4/POSIX-based operating system (Concentrix). All components including the software are modular in design and can be reconfigured as needs and system uses change. Users can begin with a small system and add modules as needed in the field. Most add-ons can be accomplished seamlessly without revision, recompilation or re-linking of software.

  4. Standardized Modular Power Interfaces for Future Space Explorations Missions

    NASA Technical Reports Server (NTRS)

    Oeftering, Richard

    2015-01-01

    Earlier studies show that future human explorations missions are composed of multi-vehicle assemblies with interconnected electric power systems. Some vehicles are often intended to serve as flexible multi-purpose or multi-mission platforms. This drives the need for power architectures that can be reconfigured to support this level of flexibility. Power system developmental costs can be reduced, program wide, by utilizing a common set of modular building blocks. Further, there are mission operational and logistics cost benefits of using a common set of modular spares. These benefits are the goals of the Advanced Exploration Systems (AES) Modular Power System (AMPS) project. A common set of modular blocks requires a substantial level of standardization in terms of the Electrical, Data System, and Mechanical interfaces. The AMPS project is developing a set of proposed interface standards that will provide useful guidance for modular hardware developers but not needlessly constrain technology options, or limit future growth in capability. In 2015 the AMPS project focused on standardizing the interfaces between the elements of spacecraft power distribution and energy storage. The development of the modular power standard starts with establishing mission assumptions and ground rules to define design application space. The standards are defined in terms of AMPS objectives including Commonality, Reliability-Availability, Flexibility-Configurability and Supportability-Reusability. The proposed standards are aimed at assembly and sub-assembly level building blocks. AMPS plans to adopt existing standards for spacecraft command and data, software, network interfaces, and electrical power interfaces where applicable. Other standards including structural encapsulation, heat transfer, and fluid transfer, are governed by launch and spacecraft environments and bound by practical limitations of weight and volume. Developing these mechanical interface standards is more difficult but an essential part of defining physical building blocks of modular power. This presentation describes the AMPS projects progress towards standardized modular power interfaces.

  5. ASTM international workshop on standards and measurements for tissue engineering scaffolds.

    PubMed

    Simon, Carl G; Yaszemski, Michael J; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A

    2015-07-01

    The "Workshop on Standards & Measurements for Tissue Engineering Scaffolds" was held on May 21, 2013 in Indianapolis, IN, and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active "guide" documents for educational purposes, but few standard "test methods" or "practices." Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition, and drug release from scaffolds. Discussions highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Workshop participants emphasized the need to promote the use of standards in scaffold fabrication, characterization, and commercialization. Finally, participants noted that standards would be more broadly accepted if their impact in the TEMPs community could be quantified. Many scaffold standard needs have been identified and focus is turning to generating these standards to support the use of scaffolds in TEMPs. © 2014 Wiley Periodicals, Inc.

  6. ASTM International Workshop on Standards & Measurements for Tissue Engineering Scaffolds

    PubMed Central

    Simon, Carl G.; Yaszemski, Michael J.; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A.

    2016-01-01

    The “Workshop on Standards & Measurements for Tissue Engineering Scaffolds” was held on May 21, 2013 in Indianapolis, IN and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active “guide” documents for educational purposes, but that few standard “test methods” or “practices” have been published. Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition and drug release from scaffolds. Discussions also highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Finally, dialogue emphasized the needs to promote the use of standards in scaffold fabrication, characterization, and commercialization and to assess the use and impact of standards in the TEMPs community. Many scaffold standard needs have been identified and focus should now turn to generating these standards to support the use of scaffolds in TEMPs. PMID:25220952

  7. Telemonitoring systems interoperability challenge: an updated review of the applicability of ISO/IEEE 11073 standards for interoperability in telemonitoring.

    PubMed

    Galarraga, M; Serrano, L; Martinez, I; de Toledo, P; Reynolds, Melvin

    2007-01-01

    Advances in Information and Communication Technologies, ICT, are bringing new opportunities and use cases in the field of systems and Personal Health Devices used for the telemonitoring of citizens in Home or Mobile scenarios. At a time of such challenges, this review arises from the need to identify robust technical telemonitoring solutions that are both open and interoperable. These systems demand standardized solutions to be cost effective and to take advantage of standardized operation and interoperability. Thus, the fundamental challenge is to design plug-&-play devices that, either as individual elements or as components, can be incorporated in a simple way into different Telecare systems, perhaps configuring a personal user network. Moreover, there is an increasing market pressure from companies not traditionally involved in medical markets, asking for a standard for Personal Health Devices, which foresee a vast demand for telemonitoring, wellness, Ambient Assisted Living (AAL) and e-health applications. However, the newly emerging situations imply very strict requirements for the protocols involved in the communication. The ISO/IEEE 11073 family of standards is adapting and moving in order to face the challenge and might appear the best positioned international standards to reach this goal. This work presents an updated survey of these standards, trying to track the changes that are being fulfilled, and tries to serve as a starting-point for those who want to familiarize themselves with them.

  8. 41 CFR 102-75.120 - Is there any other information that needs to accompany (or be submitted with) the Report of...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Is there any other information that needs to accompany (or be submitted with) the Report of Excess Real Property (Standard Form 118)? 102-75.120 Section 102-75.120 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

  9. GPS Availability for Aviation Applications : How Good Does it Need to Be?

    DOT National Transportation Integrated Search

    2000-09-19

    The availability of GPS for airborne applications is driven by the accuracy, integrity, and continuity of the system. The International Civil Aviation Organization (ICAO) Standards and Recommended Practices (SARPS) for GNSS spells out all of these re...

  10. Evaluation of Blood Glucose Monitoring System in Screening for Neonatal Hypoglycemia: Tighter Accuracy Standard.

    PubMed

    Tsao, Mei-Fen; Chang, Hui-Wen; Chang, Chien-Hsi; Cheng, Chi-Hsuan; Lin, Hsiu-Chen

    2017-05-01

    Neonatal hypoglycemia may cause severe neurological damages; therefore, tight glycemic control is crucial to identify neonate at risk. Previous blood glucose monitoring system (BGMS) failed to perform well in neonates; there are calls for the tightening of accuracy requirements. It remains a need for accurate BGMS for effective bedside diabetes management in neonatal care within a hospital population. A total of 300 neonates were recruited from local hospitals. Accuracy performance of a commercially available BGMS was evaluated against reference instrument in screening for neonatal hypoglycemia, and assessment was made based on the ISO15197:2013 and a tighter standard. At blood glucose level < 47 mg/dl, BGMS assessed met the minimal accuracy requirement of ISO 15197:2013 and tighter standard at 100% and 97.2%, respectively.

  11. Airborne UV photon-counting radiometer

    NASA Astrophysics Data System (ADS)

    Bauer, Marc C.; Wilcher, George; Banks, Calvin R.; Wood, Ronald L.

    2000-11-01

    The radiometric measurements group at the Arnold Engineering Development Center (AEDC) has developed new solar-blind radiometers for the SENSOR TALON flight test. These radiometers will be flown in an instrument pod by the 46th Test Wing at Eglin AFB. The radiometers are required to fit into a single quadrant of a 22-in.-diam sphere turret of the instrument pod. Because of minimal space requirements and photon-counting sensitivity needs, the radiometric measurements group used image intensifiers instead of the standard photomultiplier tubes (PMTs). The new design concept improved the photon-counting sensitivity, dynamic range, and uniformity of the field of view as compared to standard PMTs. A custom data acquisition system was required to miniaturize the electronics and generate a pulse code-modulated (PCM) data stream to the standard tape recording system.

  12. Standardization as an Arena for Open Innovation

    NASA Astrophysics Data System (ADS)

    Grøtnes, Endre

    This paper argues that anticipatory standardization can be viewed as an arena for open innovation and shows this through two cases from mobile telecommunication standardization. One case is the Android initiative by Google and the Open Handset Alliance, while the second case is the general standardization work of the Open Mobile Alliance. The paper shows how anticipatory standardization intentionally uses inbound and outbound streams of research and intellectual property to create new innovations. This is at the heart of the open innovation model. The standardization activities use both pooling of R&D and the distribution of freely available toolkits to create products and architectures that can be utilized by the participants and third parties to leverage their innovation. The paper shows that the technology being standardized needs to have a systemic nature to be part of an open innovation process.

  13. Identification of registered nursing care of residents in English nursing homes using the Minimum Data Set Resident Assessment Instrument (MDS/RAI) and Resource Utilisation Groups version III (RUG-III).

    PubMed

    Carpenter, Iain; Perry, Michelle; Challis, David; Hope, Kevin

    2003-05-01

    to determine if a combination of Minimum Data Set/Resident Assessment Instrument (MDS/RAI) assessment variables and the Resource Utilisation Groups version III (RUG-III) case-mix system could be used as a method of identifying and reimbursing registered nursing care needs in long-term care. the sample included 193 nursing home residents from four nursing homes from three different locations and care providers in England. The study included assessments of residents' care needs using either the MDS/RAI assessments or RUG stand-alone questionnaires and a time study that recorded the amount of nursing time received by residents over a 24-h period. Validity of RUG-III for explaining the distribution of care time between residents in different RUG-III groups was tested. The difference in direct and indirect care provided by registered general nurses (RGN) and care assistants (CA) to residents in RUG-III clinical groups was compared. the RUG-III system explained 56% of the variance in care time (Eta2, P=0.0001). Residents in RUG-III groups associated with particular medical and nursing needs (enhanced RGN care) received more than twice as much indirect RGN care time (t-test, P<0.001) and 1.4 times as much direct RGN and direct CA time (t-test, P<0.01) than residents with primarily cognitive impairment or physical problems only (standard RGN care). Residents with enhanced RGN care received an average of 48.1 min of RGN care in 24 h (95% CI 4.1-55.2) compared with an average of 31.1 min (95% CI 26.8-35.5) for residents in the standard RGN care group. A third low RGN care group was created following publication of the Department of Health guidance on NHS Funded Nursing Care. With three levels, the enhanced care group receives about 38% more than the standard group, and the low group receives about 50% of the standard group. the RUG-III system effectively differentiated between nursing home residents who are receiving 'low', 'standard' and 'enhanced' RGN care time. The findings could provide the basis of a reimbursement system for registered nursing time in long-term care facilities in the UK.

  14. Communication in science.

    PubMed

    Deda, H; Yakupoglu, H

    2002-01-01

    Science must have a common language. For centuries, Latin language carried out this job, but the progress in computer technology and internet world through the last 20 years, began to produce a new language with the new century; the computer language. The information masses, which need data language standardization, are the followings; Digital libraries and medical education systems, Consumer health informatics, Medical education systems, World Wide Web Applications, Database systems, Medical language processing, Automatic indexing systems, Image processing units, Telemedicine, New Generation Internet (NGI).

  15. Case for real-time systems development - Quo vadis?

    NASA Technical Reports Server (NTRS)

    Erb, Dona M.

    1991-01-01

    The paper focuses on the distinctive issues of computer-aided software engineering (CASE) products for the development of real-time systems. CASE technologies and associated standardization efforts are evolving from sets of conflicting interests. The majority of case products are intended for use in the development of management information systems. CASE products to support the development of large, complex real-time systems must provide additional capabilities. Generic concerns include the quality of the implementation of the required method for the phase of the system's development and whether the vendor is stable and committed to evolving the products in parallel with nonproprietary standards. The CASE market is undergoing considerable consolidation. The paper describes the major forces, cooperating entities, and remaining uncertainties that need to be weighed in near-term CASE procurements to limit risk of loss of investment in project time, trianing, and money.

  16. Standards and Specifications for Ground Processing of Space Vehicles: From an Aviation-Based Shuttle Project to Global Application

    NASA Technical Reports Server (NTRS)

    Ingalls, John; Cipolletti, John

    2011-01-01

    Proprietary or unique designs and operations are expected early in any industry's development, and often provide a competitive early market advantage. However, there comes a time when a product or industry requires standardization for the whole industry to advance...or survive. For the space industry, that time has come. Here, we will focus on standardization of ground processing for space vehicles and their ground systems. With the retirement of the Space Shuttle, and emergence of a new global space race, affordability and sustainability are more important now than ever. The growing commercialization of the space industry and current global economic environment are driving greater need for efficiencies to save time and money. More RLV's (Reusable Launch Vehicles) are being developed for the gains of reusability not achievable with traditional ELV's (Expendable Launch Vehicles). More crew/passenger vehicles are also being developed. All of this calls for more attention needed for ground processing-repeatedly before launch and after landing/recovery. RLV's should provide more efficiencies than ELV's, as long as MRO (Maintenance, Repair, and Overhaul) is well-planned-even for the unplanned problems. NASA's Space Shuttle is a primary example of an RLV which was supposed to thrive on reusability savings with efficient ground operations, but lessons learned show that costs were (and still are) much greater than expected. International standards and specifications can provide the commonality needed to simplify design and manufacturing as well as to improve safety, quality, maintenance, and operability. There are standards organizations engaged in the space industry, but ground processing is one of the areas least addressed. Challenges are encountered due to various factors often not considered during development. Multiple vehicle elements, sites, customers, and contractors pose various functional and integration difficulties. Resulting technical publication structures and methods are incongruent. Some processing products are still done on paper, some electronic, and many being converted in between. Business systems then are not fully compatible, and paper as well as electronic conversions are time-consuming and costly. NASA and its Shuttle contractors setup rules and systems to handle what has produced over 130 RLV launches, but they have had many challenges. Attempts have been made to apply aviation industry specifications to make the Shuttle more efficient with its ground processing. One efficiency project example was to make a Shuttle Maintenance Manual (SMM) based on the commercial ATA (Air Transport Association of America) Spec 100 for technical publications. This industry standard, along with others, has been a foundation for efficient global MRO of commercial airlines for years. A modified version was also made for some military aircraft. The SMM project found many similarities in Spec 100 which apply to the Shuttle, and room for expansion for space systems/structures not in aircraft. The SMM project team met with the ATA and representatives from NASA's X-33 and X-34 programs to discuss collaboration on a national space standard based on Spec 100. A pilot project was enabled for a subset of Shuttle systems. Full implementation was not yet achieved, X-33 and X-34 were cancelled, and the Shuttles were then designated for retirement. Nonetheless, we can learn from this project how to expand this concept to all space vehicle products. Since then, ATA has joined with ASD (AeroSpace and Defence Industries Association of Europe) and AIA (Aerospace Industries Association) to form a much-enhanced and expanded international specification: Sl000D, International Specification for Technical Publications. It includes air, land, and sea vehicles, missiles, support equipment, ordnance, and communications. It is used by a growing number of countries for commercial and government products. Its modular design is supported by a Common Source Dabase (CSDB), and COTS (commercial off-the-shelf) software is available for production of IETP's (Interactive Electronic Technical Publications). A few space industry products in Europe have begun to apply Sl000D already. Also, there are other related standards/specifications which have global implications. We have an opportunity to adapt Sl000D and possibly other standards for use with space vehicles and ground systems. Sl000D has plenty of flexibility to apply to any product needed. To successfully grow the viability of the space industry, all members, commercial and government, will need to engage cooperatively in developing and applying standards to move toward interoperability. If we leverage and combine the best existing space standards and specifications, develop new ones to address known gaps, and adapt the best applicable features from other industries, we can establish an infrastructure to not only accelerate current development, but also build longevity for a more cohesive international space community.

  17. A flexible system for vital signs monitoring in hospital general care wards based on the integration of UNIX-based workstations, standard networks and portable vital signs monitors.

    PubMed

    Welch, J P; Sims, N; Ford-Carlton, P; Moon, J B; West, K; Honore, G; Colquitt, N

    1991-01-01

    The article describes a study conducted on general surgical and thoracic surgical floors of a 1000-bed hospital to assess the impact of a new network for portable patient care devices. This network was developed to address the needs of hospital patients who need constant, multi-parameter, vital signs surveillance, but do not require intensive nursing care. Bedside wall jacks were linked to UNIX-based workstations using standard digital network hardware, creating a flexible system (for general care floors of the hospital) that allowed the number of monitored locations to increase and decrease as patient census and acuity levels varied. It also allowed the general care floors to provide immediate, centralized vital signs monitoring for patients who unexpectedly became unstable, and permitted portable monitors to travel with patients as they were transferred between hospital departments. A disk-based log within the workstation automatically collected performance data, including patient demographics, monitor alarms, and network status for analysis. The log has allowed the developers to evaluate the use and performance of the system.

  18. Setting performance standards for medical practice: a theoretical framework.

    PubMed

    Southgate, L; Hays, R B; Norcini, J; Mulholland, H; Ayers, B; Woolliscroft, J; Cusimano, M; McAvoy, P; Ainsworth, M; Haist, S; Campbell, M

    2001-05-01

    The assessment of performance in the real world of medical practice is now widely accepted as the goal of assessment at the postgraduate level. This is largely a validity issue, as it is recognised that tests of knowledge and in clinical simulations cannot on their own really measure how medical practitioners function in the broader health care system. However, the development of standards for performance-based assessment is not as well understood as in competency assessment, where simulations can more readily reflect narrower issues of knowledge and skills. This paper proposes a theoretical framework for the development of standards that reflect the more complex world in which experienced medical practitioners work. The paper reflects the combined experiences of a group of education researchers and the results of literature searches that included identifying current health system data sources that might contribute information to the measurement of standards. Standards that reflect the complexity of medical practice may best be developed through an "expert systems" analysis of clinical conditions for which desired health care outcomes reflect the contribution of several health professionals within a complex, three-dimensional, contextual model. Examples of the model are provided, but further work is needed to test validity and measurability.

  19. Energy Storage System Safety: Plan Review and Inspection Checklist

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cole, Pam C.; Conover, David R.

    Codes, standards, and regulations (CSR) governing the design, construction, installation, commissioning, and operation of the built environment are intended to protect the public health, safety, and welfare. While these documents change over time to address new technology and new safety challenges, there is generally some lag time between the introduction of a technology into the market and the time it is specifically covered in model codes and standards developed in the voluntary sector. After their development, there is also a timeframe of at least a year or two until the codes and standards are adopted. Until existing model codes andmore » standards are updated or new ones are developed and then adopted, one seeking to deploy energy storage technologies or needing to verify the safety of an installation may be challenged in trying to apply currently implemented CSRs to an energy storage system (ESS). The Energy Storage System Guide for Compliance with Safety Codes and Standards1 (CG), developed in June 2016, is intended to help address the acceptability of the design and construction of stationary ESSs, their component parts, and the siting, installation, commissioning, operations, maintenance, and repair/renovation of ESS within the built environment.« less

  20. CSEO – the Cigarette Smoke Exposure Ontology

    PubMed Central

    2014-01-01

    Background In the past years, significant progress has been made to develop and use experimental settings for extensive data collection on tobacco smoke exposure and tobacco smoke exposure-associated diseases. Due to the growing number of such data, there is a need for domain-specific standard ontologies to facilitate the integration of tobacco exposure data. Results The CSEO (version 1.0) is composed of 20091 concepts. The ontology in its current form is able to capture a wide range of cigarette smoke exposure concepts within the knowledge domain of exposure science with a reasonable sensitivity and specificity. Moreover, it showed a promising performance when used to answer domain expert questions. The CSEO complies with standard upper-level ontologies and is freely accessible to the scientific community through a dedicated wiki at https://publicwiki-01.fraunhofer.de/CSEO-Wiki/index.php/Main_Page. Conclusions The CSEO has potential to become a widely used standard within the academic and industrial community. Mainly because of the emerging need of systems toxicology to controlled vocabularies and also the lack of suitable ontologies for this domain, the CSEO prepares the ground for integrative systems-based research in the exposure science. PMID:25093069

  1. Foreign currency-related translation complexities in cross-border healthcare applications.

    PubMed

    Kumar, Anand; Rodrigues, Jean M

    2009-01-01

    International cross-border private hospital chains need to apply the standards for foreign currency translation in order to consolidate the balance sheet and income statements. This not only exposes such chains to exchange rate fluctuations in different ways, but also creates added requirements for enterprise-level IT systems especially when they produce parameters which are used to measure the financial and operational performance of the foreign subsidiary or the parent hospital. Such systems would need to come to terms with the complexities involved in such currency-related translations in order to provide the correct data for performance benchmarking.

  2. The Bologna Club: What U.S. Higher Education Can Learn from a Decade of European Reconstruction

    ERIC Educational Resources Information Center

    Adelman, Clifford

    2008-01-01

    This report examines the efforts of 46 European nations to harmonize (not "standardize") their higher education systems and indicates that the United States higher education system needs to adopt some of the features of the Bologna Process. Based on what can be learned from the Bologna Process, this report makes concrete suggestions for…

  3. Sanitary Survey Training. The Need-to-Know Material. Student's Text.

    ERIC Educational Resources Information Center

    Gardner, Anne, Ed.

    A sanitary survey is an onsite inspection of a public water system by competent personnel who use a standard form, procedure, and method to survey the effectiveness and maintenance of the system and to determine its ability to provide continuously safe water to the consuming public. This text, developed as an aid to providing instruction on how to…

  4. Columbia River Coordinated Information System (CIS), 1992-1993 Annual Report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rowe, Mike; Roger, Phillip B.; O'Connor, Dick

    1993-11-01

    The purposes of this report are to: (1) describe the project to date; (2) to document the work and accomplishments of the (CIS) project for Fiscal Year 1993; and (3) to provide a glimpse of future project direction. The concept of a Coordinated Information System (CIS) as an approach to meeting the growing needs for regionally standardized anadromous fish information.

  5. The current format and ongoing advances of medical education in the United States.

    PubMed

    Gishen, Kriya; Ovadia, Steven; Arzillo, Samantha; Avashia, Yash; Thaller, Seth R

    2014-01-01

    The objective of this study was to examine the current system of medical education along with the advances that are being made to support the demands of a changing health care system. American medical education must reform to anticipate the future needs of a changing health care system. Since the dramatic transformations to medical education that followed the publication of the Flexner report in 1910, medical education in the United States has largely remained unaltered. Today, the education of future physicians is undergoing modifications at all levels: premedical education, medical school, and residency training. Advances are being made with respect to curriculum design and content, standardized testing, and accreditation milestones. Fields such as plastic surgery are taking strides toward improving resident training as the next accreditation system is established. To promote more efficacious medical education, the American Medical Association has provided grants for innovations in education. Likewise, the Accreditation Council for Graduate Medical Education outlined 6 core competencies to standardize the educational goals of residency training. Such efforts are likely to improve the education of future physicians so that they are able to meet the future needs of American health care.

  6. Hygiene on maternity units: lessons from a needs assessment in Bangladesh and India

    PubMed Central

    Cross, Suzanne; Afsana, Kaosar; Banu, Morsheda; Mavalankar, Dileep; Morrison, Emma; Rahman, Atiya; Roy, Tapash; Saxena, Deepak; Vora, Kranti; Graham, Wendy J

    2016-01-01

    Background As the proportion of deliveries in health institutions increases in low- and middle-income countries, so do the challenges of maintaining standards of hygiene and preventing healthcare-associated infections (HCAIs) in mothers and babies. Adequate water, sanitation, and hygiene (WASH) and infection prevention and control (IPC) in these settings should be seen as integral parts of the broader domain of quality care. Assessment approaches are needed which capture standards for both WASH and IPC, and so inform quality improvement processes. Design A needs assessment was conducted in seven maternity units in Gujarat, India, and eight in Dhaka Division, Bangladesh in 2014. The WASH & CLEAN study developed and applied a suite of tools – a ‘walkthrough checklist’ which included the collection of swab samples, a facility needs assessment tool and document review, and qualitative interviews with staff and recently delivered women – to establish the state of hygiene as measured by visual cleanliness and the presence of potential pathogens, and individual and contextual determinants or drivers. Results No clear relationship was found between visually assessed cleanliness and the presence of pathogens; findings from qualitative interviews and the facility questionnaire found inadequacies in IPC training for healthcare providers and no formal training at all for ward cleaners. Lack of written policies and protocols, and poor monitoring and supervision also contributed to suboptimal IPC standards. Conclusions Visual assessment of cleanliness and hygiene is an inadequate marker for ‘safety’ in terms of the presence of potential pathogens and associated risk of infection. Routine environmental screening of high-risk touch sites using simple microbiology could improve detection and control of pathogens. IPC training for both healthcare providers and ward cleaners represents an important opportunity for quality improvement. This should occur in conjunction with broader systems changes, including the establishment of functioning IPC committees, implementing standard policies and protocols, and improving health management information systems to capture information on maternal and newborn HCAIs. PMID:27964775

  7. Fit for purpose quality management system for military forensic exploitation.

    PubMed

    Wilson, Lauren Elizabeth; Gahan, Michelle Elizabeth; Robertson, James; Lennard, Chris

    2018-03-01

    In a previous publication we described a systems approach to forensic science applied in the military domain. The forensic science 'system of systems' describes forensic science as a sub-system in the larger criminal justice, law enforcement, intelligence, and military systems, with quality management being an important supporting system. Quality management systems help to ensure that organisations achieve their objective and continually improve their capability. Components of forensic science quality management systems can include standardisation of processes, accreditation of facilities to national/international standards, and certification of personnel. A fit for purpose quality management system should be balanced to allow organisations to meet objectives, provide continuous improvement; mitigate risk; and impart a positive quality culture. Considerable attention over the last decades has been given to the need for forensic science quality management systems to meet criminal justice and law enforcement objectives. More recently, the need for the forensic quality management systems to meet forensic intelligence objectives has been considered. This paper, for the first time, discusses the need for a fit for purpose quality management system for military forensic exploitation. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

  8. Performance comparison of an active matrix flat panel imager, computed radiography system, and a screen-film system at four standard radiation qualities.

    PubMed

    Monnin, P; Gutierrez, D; Bulling, S; Lepori, D; Valley, J F; Verdun, F R

    2005-02-01

    Four standard radiation qualities (from RQA 3 to RQA 9) were used to compare the imaging performance of a computed radiography (CR) system (general purpose and high resolution phosphor plates of a Kodak CR 9000 system), a selenium-based direct flat panel detector (Kodak Direct View DR 9000), and a conventional screen-film system (Kodak T-MAT L/RA film with a 3M Trimax Regular screen of speed 400) in conventional radiography. Reference exposure levels were chosen according to the manufacturer's recommendations to be representative of clinical practice (exposure index of 1700 for digital systems and a film optical density of 1.4). With the exception of the RQA 3 beam quality, the exposure levels needed to produce a mean digital signal of 1700 were higher than those needed to obtain a mean film optical density of 1.4. In spite of intense developments in the field of digital detectors, screen-film systems are still very efficient detectors for most of the beam qualities used in radiology. An important outcome of this study is the behavior of the detective quantum efficiency of the digital radiography (DR) system as a function of beam energy. The practice of users to increase beam energy when switching from a screen-film system to a CR system, in order to improve the compromise between patient dose and image quality, might not be appropriate when switching from screen-film to selenium-based DR systems.

  9. [Update to ISO 15189:2012, and future prospects].

    PubMed

    Shimoda, Katsuji; Kubono, Katsuo

    2014-06-01

    ISO (the International Organization for Standardization) is a worldwide federation of national standard bodies (ISO member bodies). The work of preparing international standards is normally carried out through ISO technical committees. ISO 15189 was prepared by Technical Committee ISO/TC 212, clinical laboratory testing, and in vitro diagnostic test systems. This third edition replaces the second edition (ISO 15189:2007), which was technically revised. Medical laboratory services are essential for patient care and, therefore, have to be available to meet the needs of all patients and the clinical personnel responsible for the care of those patients.

  10. WE-E-12A-01: Medical Physics 1.0 to 2.0: MRI, Displays, Informatics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pickens, D; Flynn, M; Peck, D

    Medical Physics 2.0 is a bold vision for an existential transition of clinical imaging physics in face of the new realities of value-based and evidence-based medicine, comparative effectiveness, and meaningful use. It speaks to how clinical imaging physics can expand beyond traditional insular models of inspection and acceptance testing, oriented toward compliance, towards team-based models of operational engagement, prospective definition and assurance of effective use, and retrospective evaluation of clinical performance. Organized into four sessions of the AAPM, this particular session focuses on three specific modalities as outlined below. MRI 2.0: This presentation will look into the future of clinicalmore » MR imaging and what the clinical medical physicist will need to be doing as the technology of MR imaging evolves. Many of the measurement techniques used today will need to be expanded to address the advent of higher field imaging systems and dedicated imagers for specialty applications. Included will be the need to address quality assurance and testing metrics for multi-channel MR imagers and hybrid devices such as MR/PET systems. New pulse sequences and acquisition methods, increasing use of MR spectroscopy, and real-time guidance procedures will place the burden on the medical physicist to define and use new tools to properly evaluate these systems, but the clinical applications must be understood so that these tools are use correctly. Finally, new rules, clinical requirements, and regulations will mean that the medical physicist must actively work to keep her/his sites compliant and must work closely with physicians to ensure best performance of these systems. Informatics Display 1.0 to 2.0: Medical displays are an integral part of medical imaging operation. The DICOM and AAPM (TG18) efforts have led to clear definitions of performance requirements of monochrome medical displays that can be followed by medical physicists to ensure proper performance. However, effective implementation of that oversight has been challenging due to the number and extend of medical displays in use at a facility. The advent of color display and mobile displays has added additional challenges to the task of the medical physicist. This informatics display lecture first addresses the current display guidelines (the 1.0 paradigm) and further outlines the initiatives and prospects for color and mobile displays (the 2.0 paradigm). Informatics Management 1.0 to 2.0: Imaging informatics is part of every radiology practice today. Imaging informatics covers everything from the ordering of a study, through the data acquisition and processing, display and archiving, reporting of findings and the billing for the services performed. The standardization of the processes used to manage the information and methodologies to integrate these standards is being developed and advanced continuously. These developments are done in an open forum and imaging organizations and professionals all have a part in the process. In the Informatics Management presentation, the flow of information and the integration of the standards used in the processes will be reviewed. The role of radiologists and physicists in the process will be discussed. Current methods (the 1.0 paradigm) and evolving methods (the 2.0 paradigm) for validation of informatics systems function will also be discussed. Learning Objectives: Identify requirements for improving quality assurance and compliance tools for advanced and hybrid MRI systems. Identify the need for new quality assurance metrics and testing procedures for advanced systems. Identify new hardware systems and new procedures needed to evaluate MRI systems. Understand the components of current medical physics expectation for medical displays. Understand the role and prospect fo medical physics for color and mobile display devices. Understand different areas of imaging informatics and the methodology for developing informatics standards. Understand the current status of informatics standards and the role of physicists and radiologists in the process, and the current technology for validating the function of these systems.« less

  11. Anthropometric standards for Australian primary school children: Towards a system for monitoring and supporting children's development.

    PubMed

    Cochrane, Thomas; Davey, Rachel C; de Castella, F Robert

    2017-03-01

    To provide two foundation elements of a proposed new system to support children's physical and body status development throughout primary school: (a) age and gender appropriate achievement (anthropometric) standards and (b) a system of monitoring, feedback and support. Repeated cross-sectional sampling involving 91 schools across 5 Australian States and Territories between 2000 and 2011. Anthropometric data from 29,928 (14,643 girls, 15,285 boys) Australian children aged between 5 and 12.5 years were used to develop progression standards (norm centiles) covering the primary school years. Measures used were: height, weight, body mass index, per cent body fat, grip strength, standing long jump, cardiorespiratory fitness, sit-ups and sit-and-reach. These norms were then used to develop a Physical Activity and Lifestyle Management (PALM) system that could form the basis for progression, monitoring and reporting of anthropometric achievement standards for children. Tables and representative centile curves (3rd, 15th, 50th, 85th and 97th) for each gender and half-year age group were produced. An illustrative example of the PALM system in operation was also provided. Our research provides gender and half-year age specific anthropometric standards for Australian primary school children. Furthermore, we have developed a monitoring and progression system that could be embedded in school communities to help address the prevalence of underweight, overweight and obesity and decline in physical fitness standards. The proposed system is designed on behalf of children and families and would be administered through school settings. Change, where needed, would be delivered by the supporting school community. Copyright © 2016 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  12. Model-Based Systems

    NASA Technical Reports Server (NTRS)

    Frisch, Harold P.

    2007-01-01

    Engineers, who design systems using text specification documents, focus their work upon the completed system to meet Performance, time and budget goals. Consistency and integrity is difficult to maintain within text documents for a single complex system and more difficult to maintain as several systems are combined into higher-level systems, are maintained over decades, and evolve technically and in performance through updates. This system design approach frequently results in major changes during the system integration and test phase, and in time and budget overruns. Engineers who build system specification documents within a model-based systems environment go a step further and aggregate all of the data. They interrelate all of the data to insure consistency and integrity. After the model is constructed, the various system specification documents are prepared, all from the same database. The consistency and integrity of the model is assured, therefore the consistency and integrity of the various specification documents is insured. This article attempts to define model-based systems relative to such an environment. The intent is to expose the complexity of the enabling problem by outlining what is needed, why it is needed and how needs are being addressed by international standards writing teams.

  13. Medical Data Transmission Using Cell Phone Networks

    NASA Astrophysics Data System (ADS)

    Voos, J.; Centeno, C.; Riva, G.; Zerbini, C.; Gonzalez, E.

    2011-12-01

    A big challenge in telemedicine systems is related to have the technical requirements needed for a successful implementation in remote locations where the available hardware and communication infrastructure is not adequate for a good medical data transmission. Despite of the wide standards availability, methodologies, applications and systems integration facilities in telemedicine, in many cases the implementation requirements are not achievable to allow the system execution in remote areas of our country. Therefore, this paper presents an alternative for the messages transmission related to medical studies using the cellular network and the standard HL7 V3 [1] for data modeling. The messages are transmitted to a web server and stored in a centralized database which allows data sharing with other specialists.

  14. Untangling home care's Gordion knot. The Home Care Information Management and Technology Forum.

    PubMed

    Wilhelm, Lawrence

    2003-03-01

    As home care and hospice technological tools have evolved over the past six years, there have been no efforts to standardize the collection, storage, and reporting of data among different systems. The rapid pace of technological change, increased use of wireless and remote technology, a greater reliance on tools for collaboration and networking, and the ever-increasing regulatory burden on home care and hospice providers have resulted in the need for polices and procedures for the standardization of data across the industry. Agency administrators, already strapped for cash and time, need to know what technology investments they need to make now in order to remain competitive in the future. The National Association for Home Care & Hospice has created a forum to address these concerns and to develop a blueprint for the future development of home care and hospice technology.

  15. Standardized strapdown inertial component modularity study, volume 2

    NASA Technical Reports Server (NTRS)

    Feldman, J.

    1974-01-01

    To obtain cost effective strapdown navigation, guidance and stabilization systems to meet anticipated future needs a standardized modularized strapdown system concept is proposed. Three performance classes, high, medium and low, are suggested to meet the range of applications. Candidate inertial instruments are selected and analyzed for interface compatibility. Electronic packaging and processing, materials and thermal considerations applying to the three classes are discussed and recommendations advanced. Opportunities for automatic fault detection and redundancy are presented. The smallest gyro and accelerometer modules are projected as requiring a volume of 26 cubic inches and 23.6 cubic inches, respectively. Corresponding power dissipation is projected as 5 watts, and 2.6 watts respectively.

  16. 36 CFR 1210.22 - Payment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Financial and Program Management... financial management systems that meet the standards for fund control and accountability as established in § 1210.21. Cash advances to a recipient organization shall be limited to the minimum amounts needed and...

  17. The Role of Computers in Archives.

    ERIC Educational Resources Information Center

    Cook, Michael

    1989-01-01

    Discusses developments in information technologies, their present state of application, and their general significance for the future of archives and records management systems. The likely impact of future technological developments is considered and the need for infrastructural standards, professional cooperation, and training is emphasized.…

  18. The weak acid nature of precipitation

    Treesearch

    John O. Frohliger; Robert L. Kane

    1976-01-01

    Recent measurements of the pH of precipitation leave no doubt that rainfall is acidic. Evidence will be presented that precipitation is a weak acid system. The results of this research indicate the need to establish standard sampling procedures to provide uniform sampling of precipitation

  19. Electric drive vehicle systems : suggested changes to large truck and motorcoach regulations and inspection procedures.

    DOT National Transportation Integrated Search

    2015-09-01

    This report provides recommendations for changes to the Federal Motor Carrier Safety Regulations (FMCSRs), : North American Standard (NAS) inspection procedures, and Out-of-Service (OOS) criteria that are needed to : accommodate and facilitate the us...

  20. Standardization for oxygen isotope ratio measurement - still an unsolved problem.

    PubMed

    Kornexl; Werner; Gehre

    1999-07-01

    Numerous organic and inorganic laboratory standards were gathered from nine European and North American laboratories and were analyzed for their delta(18)O values with a new on-line high temperature pyrolysis system that was calibrated using Vienna standard mean ocean water (VSMOW) and standard light Antartic precipitation (SLAP) internationally distributed reference water samples. Especially for organic materials, discrepancies between reported and measured values were high, ranging up to 2 per thousand. The reasons for these discrepancies are discussed and the need for an exact and reliable calibration of existing reference materials, as well as for the establishment of additional organic and inorganic reference materials is stressed. Copyright 1999 John Wiley & Sons, Ltd.

  1. Standardization of mapping practices in the British Geological Survey

    NASA Astrophysics Data System (ADS)

    Allen, Peter M.

    1997-07-01

    Because the British Geological Survey (BGS) has had, since its foundation in 1835, a mandate to produce geological maps for the whole of Great Britain, there is a long history of introducing standard practices in the way rocks and rock units have been named, classified and illustrated on maps. The reasons for the failure of some of these practices are examined and assessed in relation to the needs of computerized systems for holding and disseminating geological information.

  2. NIST Stars: Absolute Spectrophotometric Calibration of Vega and Sirius

    NASA Astrophysics Data System (ADS)

    Deustua, Susana; Woodward, John T.; Rice, Joseph P.; Brown, Steven W.; Maxwell, Stephen E.; Alberding, Brian G.; Lykke, Keith R.

    2018-01-01

    Absolute flux calibration of standard stars, traceable to SI (International System of Units) standards, is essential for 21st century astrophysics. Dark energy investigations that rely on observations of Type Ia supernovae and precise photometric redshifts of weakly lensed galaxies require a minimum accuracy of 0.5 % in the absolute color calibration. Studies that aim to address fundamental stellar astrophysics also benefit. In the era of large telescopes and all sky surveys well-calibrated standard stars that do not saturate and that are available over the whole sky are needed. Significant effort has been expended to obtain absolute measurements of the fundamental standards Vega and Sirius (and other stars) in the visible and near infrared, achieving total uncertainties between1% and 3%, depending on wavelength, that do not meet the needed accuracy. The NIST Stars program aims to determine the top-of-the-atmosphere absolute spectral irradiance of bright stars to an uncertainty less than 1% from a ground-based observatory. NIST Stars has developed a novel, fully SI-traceable laboratory calibration strategy that will enable achieving the desired accuracy. This strategy has two key components. The first is the SI-traceable calibration of the entire instrument system, and the second is the repeated spectroscopic measurement of the target star throughout the night. We will describe our experimental strategy, present preliminary results for Vega and Sirius and an end-to-end uncertainty budget

  3. 25 CFR 36.12 - Standard III-Program needs assessment.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Standard III-Program needs assessment. 36.12 Section 36... Management § 36.12 Standard III—Program needs assessment. The policy and procedures of each school and its curricula shall be developed and revised based on an assessment of educational needs. This needs assessment...

  4. 25 CFR 36.12 - Standard III-Program needs assessment.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Standard III-Program needs assessment. 36.12 Section 36.12... § 36.12 Standard III—Program needs assessment. The policy and procedures of each school and its curricula shall be developed and revised based on an assessment of educational needs. This needs assessment...

  5. 25 CFR 36.12 - Standard III-Program needs assessment.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Standard III-Program needs assessment. 36.12 Section 36... Management § 36.12 Standard III—Program needs assessment. The policy and procedures of each school and its curricula shall be developed and revised based on an assessment of educational needs. This needs assessment...

  6. 25 CFR 36.12 - Standard III-Program needs assessment.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Standard III-Program needs assessment. 36.12 Section 36... Management § 36.12 Standard III—Program needs assessment. The policy and procedures of each school and its curricula shall be developed and revised based on an assessment of educational needs. This needs assessment...

  7. Concept for an International Standard related to Space Weather Effects on Space Systems

    NASA Astrophysics Data System (ADS)

    Tobiska, W. Kent; Tomky, Alyssa

    There is great interest in developing an international standard related to space weather in order to specify the tools and parameters needed for space systems operations. In particular, a standard is important for satellite operators who may not be familiar with space weather. In addition, there are others who participate in space systems operations that would also benefit from such a document. For example, the developers of software systems that provide LEO satellite orbit determination, radio communication availability for scintillation events (GEO-to-ground L and UHF bands), GPS uncertainties, and the radiation environment from ground-to-space for commercial space tourism. These groups require recent historical data, current epoch specification, and forecast of space weather events into their automated or manual systems. Other examples are national government agencies that rely on space weather data provided by their organizations such as those represented in the International Space Environment Service (ISES) group of 14 national agencies. Designers, manufacturers, and launchers of space systems require real-time, operational space weather parameters that can be measured, monitored, or built into automated systems. Thus, a broad scope for the document will provide a useful international standard product to a variety of engineering and science domains. The structure of the document should contain a well-defined scope, consensus space weather terms and definitions, and internationally accepted descriptions of the main elements of space weather, its sources, and its effects upon space systems. Appendices will be useful for describing expanded material such as guidelines on how to use the standard, how to obtain specific space weather parameters, and short but detailed descriptions such as when best to use some parameters and not others; appendices provide a path for easily updating the standard since the domain of space weather is rapidly changing with new advances in scientific and engineering understanding. We present a draft outline that can be used as the basis for such a standard.

  8. The EMIR experience in the use of software control simulators to speed up the time to telescope

    NASA Astrophysics Data System (ADS)

    Lopez Ramos, Pablo; López-Ruiz, J. C.; Moreno Arce, Heidy; Rosich, Josefina; Perez Menor, José Maria

    2012-09-01

    One of the main problems facing development teams working on instrument control systems consists on the need to access mechanisms which are not available until well into the integration phase. The need to work with real hardware creates additional problems like, among others: certain faults cannot be tested due to the possibility of hardware damage, taking the system to the limit may shorten its operational lifespan and the full system may not be available during some periods due to maintenance and/or testing of individual components. These problems can be treated with the use of simulators and by applying software/hardware standards. Since information on the construction and performance of electro-mechanical systems is available at relatively early stages of the project, simulators are developed in advance (before the existence of the mechanism) or, if conventions and standards have been correctly followed, a previously developed simulator might be used. This article describes our experience in building software simulators and the main advantages we have identified, which are: the control software can be developed even in the absence of real hardware, critical tests can be prepared using the simulated systems, test system behavior for hardware failure situations that represent a risk of the real system, and the speed up of in house integration of the entire instrument. The use of simulators allows us to reduce development, testing and integration time.

  9. US Army Weapon Systems Human-Computer Interface (WSHCI) style guide, Version 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Avery, L.W.; O`Mara, P.A.; Shepard, A.P.

    1996-09-30

    A stated goal of the U.S. Army has been the standardization of the human computer interfaces (HCIS) of its system. Some of the tools being used to accomplish this standardization are HCI design guidelines and style guides. Currently, the Army is employing a number of style guides. While these style guides provide good guidance for the command, control, communications, computers, and intelligence (C4I) domain, they do not necessarily represent the more unique requirements of the Army`s real time and near-real time (RT/NRT) weapon systems. The Office of the Director of Information for Command, Control, Communications, and Computers (DISC4), in conjunctionmore » with the Weapon Systems Technical Architecture Working Group (WSTAWG), recognized this need as part of their activities to revise the Army Technical Architecture (ATA). To address this need, DISC4 tasked the Pacific Northwest National Laboratory (PNNL) to develop an Army weapon systems unique HCI style guide. This document, the U.S. Army Weapon Systems Human-Computer Interface (WSHCI) Style Guide, represents the first version of that style guide. The purpose of this document is to provide HCI design guidance for RT/NRT Army systems across the weapon systems domains of ground, aviation, missile, and soldier systems. Each domain should customize and extend this guidance by developing their domain-specific style guides, which will be used to guide the development of future systems within their domains.« less

  10. The information security needs in radiological information systems-an insight on state hospitals of Iran, 2012.

    PubMed

    Farhadi, Akram; Ahmadi, Maryam

    2013-12-01

    Picture Archiving and Communications System (PACS) was originally developed for radiology services over 20 years ago to capture medical images electronically. Medical diagnosis methods are based on images such as clinical radiographs, ultrasounds, CT scans, MRIs, or other imaging modalities. Information obtained from these images is correlated with patient information. So with regards to the important role of PACS in hospitals, we aimed to evaluate the PACS and survey the information security needed in the Radiological Information system. First, we surveyed the different aspects of PACS that should be in any health organizations based on Department of Health standards and prepared checklists for assessing the PACS in different hospitals. Second, we surveyed the security controls that should be implemented in PACS. Checklists reliability is affirmed by professors of Tehran Science University. Then, the final data are inputted in SPSS software and analyzed. The results indicate that PACS in hospitals can transfer patient demographic information but they do not show route of information. These systems are not open source. They don't use XML-based standard and HL7 standard for exchanging the data. They do not use DS digital signature. They use passwords and the user can correct or change the medical information. PACS can detect alternation rendered. The survey of results demonstrates that PACS in all hospitals has the same features. These systems have the patient demographic data but they do not have suitable flexibility to interface network or taking reports. For the privacy of PACS in all hospitals, there were passwords for users and the system could show the changes that have been made; but there was no water making or digital signature for the users.

  11. FT4 Data Analysis Summary (SSI-ARC)

    NASA Technical Reports Server (NTRS)

    Isaacson, Douglas R.; Gong, Chester; Reardon, Scott Edward; Santiago, Confesor

    2016-01-01

    Standards for Unmanned Aircraft System (UAS) Detect-and-Avoid (DAA) systems are currently being developed under the auspices of the RTCA Special Committee 228 (SC-228). To support the development of these standards, a series of flight tests has been conducted at NASAs Armstrong Flight Research Center (NASA-AFRC). The fourth in this series of flight test activities (Flight Test 4, or simply FT4) was conducted during the Spring and Summer of 2016. FT4 supported the objectives of numerous organizations working toward UAS DAA Minimum Operational Performance Standards (MOPS) and UAS DAA Radar MOPS. The summary provided herein is limited to the objectives, analysis and conclusions of the NASA Ames Research Center (NASA-ARC) SSI team toward the refinement of UAS DAA MOPS. This document provides a high-level overview of FT4 and the SSI-ARC objectives, a summary of the data analysis methodology and recommendations for UAS DAA MOPS refinements based on the data analysis results. A total of 72 encounters were flown to support SSI-ARC objectives. Test results were generally consistent with acceptable UAS DAA system performance and will be considered in broader SC-228 requirements validation efforts. Observed alert lead times indicated acceptable UAS DAA alerting performance. Effective interoperability between the UAS DAA system and the Traffic Alert and Collision Avoidance System (TCAS) was observed with one notable exception: TCAS Resolutions Advisories (RA) were observed in the absence of any DAA alert on two occasions, indicating the need for alert parameter refinement. Findings further indicated the need for continued work in the areas of DAA Well Clear Recovery logic and alert stability for Mode-C-only intruders. Finally, results demonstrated a high level of compliance with a set of evaluation criteria designed to provide anecdotal evidence of acceptable UAS DAA system performance.

  12. Systems for monitoring and digitally recording water-quality parameters

    USGS Publications Warehouse

    Smoot, George F.; Blakey, James F.

    1966-01-01

    Digital recording of water-quality parameters is a link in the automated data collection and processing system of the U.S. Geological Survey. The monitoring and digital recording systems adopted by the Geological Survey, while punching all measurements on a standard paper tape, provide a choice of compatible components to construct a system to meet specific physical problems and data needs. As many as 10 parameters can be recorded by an Instrument, with the only limiting criterion being that measurements are expressed as electrical signals.

  13. Development of a High-Resolution Laser Absorption Spectroscopy Method with Application to the Determination of Absolute Concentration of Gaseous Elemental Mercury in Air.

    PubMed

    Srivastava, Abneesh; Hodges, Joseph T

    2018-06-05

    Isotope dilution-cold-vapor-inductively coupled plasma mass spectrometry (ID-CV-ICPMS) has become the primary standard for measurement of gaseous elemental mercury (GEM) mass concentration. However, quantitative mass spectrometry is challenging for several reasons including (1) the need for isotopic spiking with a standard reference material, (2) the requirement for bias-free passive sampling protocols, (3) the need for stable mass spectrometry interface design, and (4) the time and cost involved for gas sampling, sample processing, and instrument calibration. Here, we introduce a high-resolution laser absorption spectroscopy method that eliminates the need for sample-specific calibration standards or detailed analysis of sample treatment losses. This technique involves a tunable, single-frequency laser absorption spectrometer that measures isotopically resolved spectra of elemental mercury (Hg) spectra of 6 1 S 0 ← 6 3 P 1 intercombination transition near λ = 253.7 nm. Measured spectra are accurately modeled from first-principles using the Beer-Lambert law and Voigt line profiles combined with literature values for line positions, line shape parameters, and the spontaneous emission Einstein coefficient to obtain GEM mass concentration values. We present application of this method for the measurement of the equilibrium concentration of mercury vapor near room temperature. Three closed systems are considered: two-phase mixtures of liquid Hg and its vapor and binary two-phase mixtures of Hg-air and Hg-N 2 near atmospheric pressure. Within the experimental relative standard uncertainty, 0.9-1.5% congruent values of the equilibrium Hg vapor concentration are obtained for the Hg-only, Hg-air, Hg-N 2 systems, in confirmation with thermodynamic predictions. We also discuss detection limits and the potential of the present technique to serve as an absolute primary standard for measurements of gas-phase mercury concentration and isotopic composition.

  14. The need for GPS standardization

    NASA Technical Reports Server (NTRS)

    Lewandowski, Wlodzimierz W.; Petit, Gerard; Thomas, Claudine

    1992-01-01

    A desirable and necessary step for improvement of the accuracy of Global Positioning System (GPS) time comparisons is the establishment of common GPS standards. For this reason, the CCDS proposed the creation of a special group of experts with the objective of recommending procedures and models for operational time transfer by GPS common-view method. Since the announcement of the implementation of Selective Availability at the end of last spring, action has become much more urgent and this CCDS Group on GPS Time Transfer Standards has now been set up. It operates under the auspices of the permanent CCDS Working Group on TAI and works in close cooperation with the Sub-Committee on Time of the Civil GPS Service Interface Committee (CGSIC). Taking as an example the implementation of SA during the first week of July 1991, this paper illustrates the need to develop urgently at least two standardized procedures in GPS receiver software: monitoring GPS tracks with a common time scale and retaining broadcast ephemeris parameters throughout the duration of a track. Other matters requiring action are the adoption of common models for atmospheric delay, a common approach to hardware design and agreement about short-term data processing. Several examples of such deficiencies in standardization are presented.

  15. The Need for a Shear Stress Calibration Standard

    NASA Technical Reports Server (NTRS)

    Scott, Michael A.

    2004-01-01

    By surveying current research of various micro-electro mechanical systems (MEMS) shear stress sensor development efforts we illustrate the wide variety of methods used to test and characterize these sensors. The different methods of testing these sensors make comparison of results difficult in some cases, and also this comparison is further complicated by the different formats used in reporting the results of these tests. The fact that making these comparisons can be so difficult at times clearly illustrates a need for standardized testing and reporting methodologies. This need indicates that the development of a national or international standard for the calibration of MEMS shear stress sensors should be undertaken. As a first step towards the development of this standard, two types of devices are compared and contrasted. The first type device is a laminar flow channel with two different versions considered: the first built with standard manufacturing techniques and the second with advanced precision manufacturing techniques. The second type of device is a new concept for creating a known shear stress consisting of a rotating wheel with the sensor mounted tangentially to the rim and positioned in close proximity to the rim. The shear stress generated by the flow at the sensor position is simply tau = (mu)r(omega)/h, where mu is the viscosity of the ambient gas, r the wheel radius, omega the angular velocity of the wheel, and h the width of the gap between the wheel rim and the sensor. Additionally, issues related to the development of a standard for shear stress calibration are identified and discussed.

  16. Identifying appropriate reference data models for comparative effectiveness research (CER) studies based on data from clinical information systems.

    PubMed

    Ogunyemi, Omolola I; Meeker, Daniella; Kim, Hyeon-Eui; Ashish, Naveen; Farzaneh, Seena; Boxwala, Aziz

    2013-08-01

    The need for a common format for electronic exchange of clinical data prompted federal endorsement of applicable standards. However, despite obvious similarities, a consensus standard has not yet been selected in the comparative effectiveness research (CER) community. Using qualitative metrics for data retrieval and information loss across a variety of CER topic areas, we compare several existing models from a representative sample of organizations associated with clinical research: the Observational Medical Outcomes Partnership (OMOP), Biomedical Research Integrated Domain Group, the Clinical Data Interchange Standards Consortium, and the US Food and Drug Administration. While the models examined captured a majority of the data elements that are useful for CER studies, data elements related to insurance benefit design and plans were most detailed in OMOP's CDM version 4.0. Standardized vocabularies that facilitate semantic interoperability were included in the OMOP and US Food and Drug Administration Mini-Sentinel data models, but are left to the discretion of the end-user in Biomedical Research Integrated Domain Group and Analysis Data Model, limiting reuse opportunities. Among the challenges we encountered was the need to model data specific to a local setting. This was handled by extending the standard data models. We found that the Common Data Model from the OMOP met the broadest complement of CER objectives. Minimal information loss occurred in mapping data from institution-specific data warehouses onto the data models from the standards we assessed. However, to support certain scenarios, we found a need to enhance existing data dictionaries with local, institution-specific information.

  17. Integrating precision cancer medicine into healthcare-policy, practice, and research challenges.

    PubMed

    Bertier, Gabrielle; Carrot-Zhang, Jian; Ragoussis, Vassilis; Joly, Yann

    2016-10-24

    Precision medicine (PM) can be defined as a predictive, preventive, personalized, and participatory healthcare service delivery model. Recent developments in molecular biology and information technology make PM a reality today through the use of massive amounts of genetic, 'omics', clinical, environmental, and lifestyle data. With cancer being one of the most prominent public health threats in developed countries, both the research community and governments have been investing significant time, money, and efforts in precision cancer medicine (PCM). Although PCM research is extremely promising, a number of hurdles still remain on the road to an optimal integration of standardized and evidence-based use of PCM in healthcare systems. Indeed, PCM raises a number of technical, organizational, ethical, legal, social, and economic challenges that have to be taken into account in the development of an appropriate health policy framework. Here, we highlight some of the more salient issues regarding the standards needed for integration of PCM into healthcare systems, and we identify fields where more research is needed before policy can be implemented. Key challenges include, but are not limited to, the creation of new standards for the collection, analysis, and sharing of samples and data from cancer patients, and the creation of new clinical trial designs with renewed endpoints. We believe that these issues need to be addressed as a matter of priority by public health policymakers in the coming years for a better integration of PCM into healthcare.

  18. Cytometry standards continuum

    NASA Astrophysics Data System (ADS)

    Leif, Robert C.; Spidlen, Josef; Brinkman, Ryan R.

    2008-02-01

    Introduction: The International Society for Analytical Cytology, ISAC, is developing a new combined flow and image Analytical Cytometry Standard (ACS). This standard needs to serve both the research and clinical communities. The clinical medicine and clinical research communities have a need to exchange information with hospital and other clinical information systems. Methods: 1) Prototype the standard by creating CytometryML and a RAW format for binary data. 2) Join the ISAC Data Standards Task Force. 3) Create essential project documentation. 4) Cooperate with other groups by assisting in the preparation of the DICOM Supplement 122: Specimen Module and Pathology Service-Object Pair Classes. Results: CytometryML has been created and serves as a prototype and source of experience for the following: the Analytical Cytometry Standard (ACS) 1.0, the ACS container, Minimum Information about a Flow Cytometry Experiment (MIFlowCyt), and Requirements for a Data File Standard Format to Describe Flow Cytometry and Related Analytical Cytology Data. These requirements provide a means to judge the appropriateness of design elements and to develop tests for the final ACS. The requirements include providing the information required for understanding and reproducing a cytometry experiment or clinical measurement, and for a single standard for both flow and digital microscopic cytometry. Schemas proposed by other members of the ISAC Data Standards Task Force (e.g, Gating-ML) have been independently validated and have been integrated with CytometryML. The use of netCDF as an element of the ACS container has been proposed by others and a suggested method of its use is proposed.

  19. The Need for Information on Standards on eAccessibility&eInclusion - Based on the Experience of the EU-Project IN LIFE.

    PubMed

    Galinski, Christian; Giraldo Perez, Blanca Stella

    2017-01-01

    Recent investigations in several EU-projects, incl. IN LIFE revealed that experts in the field of eAccessibility & eInclusion (eAcc&eIncl) - but also general ICT developers, decision makers in industry and administration - are quite unaware of the importance of standards for interoperability and sustainability of ICT solutions. Especially, if persons with disabilities (PwD) are concerned, system development and the design of services can become unnecessarily costly. For accessibility in general and eAcc&eIncl in particular, knowing about pertinent standards is becoming an asset of personal competencies of experts and decision makers, and particularly benefit small enterprises. Given the complex world of standardization and the multitude of standards developing organizations (SDOs) easy access to information on standards is critical.

  20. Geospatial Data Standards for Indian Water Resources Systems

    NASA Astrophysics Data System (ADS)

    Goyal, A.; Tyagi, H.; Gosain, A. K.; Khosa, R.

    2016-12-01

    Sustainable management of water resources is fundamental to the socio-economic development of any nation. There is an increasing degree of dependency on digital geographical data for monitoring, planning, managing and preserving the water resources and environmental quality. But the rising sophistication associated with the sharing of geospatial data among organizations or users, demands development of data standards for seamless information exchange among collaborators. Therefore, due to the realization that these datasets are vital for efficient use of Geographical Information Systems, there is a growing emphasis on data standards for modeling, encoding and communicating spatial data. Real world hydrologic interactions represented in a digital framework requires geospatial standards that may vary in contexts like: governance, resource inventory, cultural diversity, identifiers, role and scale. Though the prevalent standards for the hydrology data facilitate a particular need in a particular context but they lack a holistic approach. However, several worldwide initiatives such as Consortium for the Advancement of Hydrologic Sciences Inc. (USA), Infrastructure for Spatial Information in the European Community (Europe), Australian Water Resources Information System, etc., endeavour to address this issue of hydrology specific spatial data standards in a wholesome manner. But unfortunately there is no such provision for hydrology data exchange within the Indian community. Moreover, these standards somehow fail in providing powerful communication of the spatial hydrologic data. This study thus investigates the shortcomings of the existing industry standards for the hydrologic data models and then demonstrates a set of requirements for effective exchange of the hydrologic information in the Indian scenario.

  1. Development of a Ground Water Data Portal for Interoperable Data Exchange within the U.S. National Ground Water Monitoring Network and Beyond

    NASA Astrophysics Data System (ADS)

    Booth, N. L.; Brodaric, B.; Lucido, J. M.; Kuo, I.; Boisvert, E.; Cunningham, W. L.

    2011-12-01

    The need for a national groundwater monitoring network within the United States is profound and has been recognized by organizations outside government as a major data gap for managing ground-water resources. Our country's communities, industries, agriculture, energy production and critical ecosystems rely on water being available in adequate quantity and suitable quality. To meet this need the Subcommittee on Ground Water, established by the Federal Advisory Committee on Water Information, created a National Ground Water Monitoring Network (NGWMN) envisioned as a voluntary, integrated system of data collection, management and reporting that will provide the data needed to address present and future ground-water management questions raised by Congress, Federal, State and Tribal agencies and the public. The NGWMN Data Portal is the means by which policy makers, academics and the public will be able to access ground water data through one seamless web-based application from disparate data sources. Data systems in the United States exist at many organizational and geographic levels and differing vocabulary and data structures have prevented data sharing and reuse. The data portal will facilitate the retrieval of and access to groundwater data on an as-needed basis from multiple, dispersed data repositories allowing the data to continue to be housed and managed by the data provider while being accessible for the purposes of the national monitoring network. This work leverages Open Geospatial Consortium (OGC) data exchange standards and information models. To advance these standards for supporting the exchange of ground water information, an OGC Interoperability Experiment was organized among international participants from government, academia and the private sector. The experiment focused on ground water data exchange across the U.S. / Canadian border. WaterML2.0, an evolving international standard for water observations, encodes ground water levels and is exchanged using the OGC Sensor Observation Service (SOS) standard. Ground Water Markup Language (GWML) encodes well log, lithology and construction information and is exchanged using the OGC Web Feature Service (WFS) standard. Within the NGWMN Data Portal, data exchange between distributed data provider repositories is achieved through the use of these web services and a central mediation hub, which performs both format (syntactic) and nomenclature (semantic) mediation, conforming heterogeneous inputs into common standards-based outputs. Through these common standards, interoperability between the U.S. NGWMN and Canada's Groundwater Information Network (GIN) is achieved, advancing a ground water virtual observatory across North America.

  2. Developing standards for a national spatial data infrastructure

    USGS Publications Warehouse

    Wortman, Kathryn C.

    1994-01-01

    The concept of a framework for data and information linkages among producers and users, known as a National Spatial Data Infrastructure (NSDI), is built upon four corners: data, technology, institutions, and standards. Standards are paramount to increase the efficiency and effectiveness of the NSDI. Historically, data standards and specifications have been developed with a very limited scope - they were parochial, and even competitive in nature, and promoted the sharing of data and information within only a small community at the expense of more open sharing across many communities. Today, an approach is needed to grow and evolve standards to support open systems and provide consistency and uniformity among data producers. There are several significant ongoing activities in geospatial data standards: transfer or exchange, metadata, and data content. In addition, standards in other areas are under discussion, including data quality, data models, and data collection.

  3. Clinical data exchange standards and vocabularies for messages.

    PubMed Central

    Huff, S. M.

    1998-01-01

    Motivation for the creation of electronic data interchange (message) standards is discussed. The ISO Open Systems Interface model is described. Clinical information models, message syntax and structure, and the need for a standardized coded vocabulary are explained. The HIPAA legislation and subsequent HHS transaction recommendations are reviewed. The history and mission statements of six of the most popular message development organizations (MDOs) are summarized, and the data exchange standards developed by these organizations are listed. The organizations described include Health Level Seven (HL7), American Standards for Testing and Materials (ASTM) E31, Digital Image Communication in Medicine (DICOM), European Committee for Standardization (Comité Européen de Normalisation), Technical Committee for Health Informatics (CEN/TC 251), the National Council for Prescription Drug Programs (NCPDP), and Accredited Standards Committee X12 Insurance Subcommittee (X12N). The locations of Internet web sites for the six organizations are provided as resources for further information. PMID:9929183

  4. Web Services as Building Blocks for an Open Coastal Observing System

    NASA Astrophysics Data System (ADS)

    Breitbach, G.; Krasemann, H.

    2012-04-01

    In coastal observing systems it is needed to integrate different observing methods like remote sensing, in-situ measurements, and models into a synoptic view of the state of the observed region. This integration can be based solely on web services combining data and metadata. Such an approach is pursued for COSYNA (Coastal Observing System for Northern and Artic seas). Data from satellite and radar remote sensing, measurements of buoys, stations and Ferryboxes are the observation part of COSYNA. These data are assimilated into models to create pre-operational forecasts. For discovering data an OGC Web Feature Service (WFS) is used by the COSYNA data portal. This Web Feature Service knows the necessary metadata not only for finding data, but in addition the URLs of web services to view and download the data. To make the data from different resources comparable a common vocabulary is needed. For COSYNA the standard names from CF-conventions are stored within the metadata whenever possible. For the metadata an INSPIRE and ISO19115 compatible data format is used. The WFS is fed from the metadata-system using database-views. Actual data are stored in two different formats, in NetCDF-files for gridded data and in an RDBMS for time-series-like data. The web service URLs are mostly standard based the standards are mainly OGC standards. Maps were created from netcdf files with the help of the ncWMS tool whereas a self-developed java servlet is used for maps of moving measurement platforms. In this case download of data is offered via OGC SOS. For NetCDF-files OPeNDAP is used for the data download. The OGC CSW is used for accessing extended metadata. The concept of data management in COSYNA will be presented which is independent of the special services used in COSYNA. This concept is parameter and data centric and might be useful for other observing systems.

  5. SAS- Semantic Annotation Service for Geoscience resources on the web

    NASA Astrophysics Data System (ADS)

    Elag, M.; Kumar, P.; Marini, L.; Li, R.; Jiang, P.

    2015-12-01

    There is a growing need for increased integration across the data and model resources that are disseminated on the web to advance their reuse across different earth science applications. Meaningful reuse of resources requires semantic metadata to realize the semantic web vision for allowing pragmatic linkage and integration among resources. Semantic metadata associates standard metadata with resources to turn them into semantically-enabled resources on the web. However, the lack of a common standardized metadata framework as well as the uncoordinated use of metadata fields across different geo-information systems, has led to a situation in which standards and related Standard Names abound. To address this need, we have designed SAS to provide a bridge between the core ontologies required to annotate resources and information systems in order to enable queries and analysis over annotation from a single environment (web). SAS is one of the services that are provided by the Geosematnic framework, which is a decentralized semantic framework to support the integration between models and data and allow semantically heterogeneous to interact with minimum human intervention. Here we present the design of SAS and demonstrate its application for annotating data and models. First we describe how predicates and their attributes are extracted from standards and ingested in the knowledge-base of the Geosemantic framework. Then we illustrate the application of SAS in annotating data managed by SEAD and annotating simulation models that have web interface. SAS is a step in a broader approach to raise the quality of geoscience data and models that are published on the web and allow users to better search, access, and use of the existing resources based on standard vocabularies that are encoded and published using semantic technologies.

  6. 22 CFR 518.22 - Payment.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Financial... and disbursement by the recipient, and (ii) Financial management systems that meet the standards for... organization shall be limited to the minimum amounts needed and be timed to be in accordance with the actual...

  7. 22 CFR 518.22 - Payment.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Financial... and disbursement by the recipient, and (ii) Financial management systems that meet the standards for... organization shall be limited to the minimum amounts needed and be timed to be in accordance with the actual...

  8. Multiple Attribute Evaluation of Auditory Warning Signals for In-Vehicle Crash Avoidance Warning Systems

    DOT National Transportation Integrated Search

    1995-11-01

    This research was directed at optimizing the auditory warnings that may be used in future crash avoidance warning applications. There is a need to standardize such warnings, so that they retain immediacy of meaning across various vehicles, situations...

  9. The Quest for Quality

    ERIC Educational Resources Information Center

    Chappuis, Stephen; Chappuis, Jan; Stiggins, Rick

    2009-01-01

    Instructional decisions based on quality assessments and a balanced assessment system most effectively promote student learning. To inform sound decisions, assessments need to satisfy five key standards of quality: (1) clear purpose; (2) clear learning targets; (3) sound assessment design; (4) effective communication of results; and (5) student…

  10. Grid Modernization | NREL

    Science.gov Websites

    development to improve the nation's electrical grid infrastructure, making it more flexible, reliable Standard, IEEE 1547 Blue cover page of report with hexagon shapes over electric grid Basic Research Needs Controls Power Systems Design and Studies Security and Resilience Institutional Support NREL grid research

  11. The Future of Principal Evaluation

    ERIC Educational Resources Information Center

    Clifford, Matthew; Ross, Steven

    2012-01-01

    The need to improve the quality of principal evaluation systems is long overdue. Although states and districts generally require principal evaluations, research and experience tell that many state and district evaluations do not reflect current standards and practices for principals, and that evaluation is not systematically administered. When…

  12. A need for the standardization of the pharmaceutical sector in Libya

    PubMed Central

    Mustafa, Asma Abubakr; Kowalski, Stefan Robert

    2010-01-01

    Medicines are health technologies that can translate into tangible benefits for numerous acute as well as chronic health conditions. A nation's pharmaceutical sector needs to be appropriately structured and managed in order to ensure a safe, effective and quality supply of medicines to society. The process of medicines management involves the sequential management of five critical activity areas; namely; registration, selection, procurement, distribution and use. Formalized and standardized management of all five critical activity areas positively influences the availability, quality and affordability of medicines and ultimately increases the reliability and quality of the national healthcare system. Aim The aim of this review is to examine the current structure and operation of medicines management (i.e. the pharmaceutical sector) in Libya. Conclusion In the Libyan healthcare system all five critical activity areas are compromised. Restructuring of the pharmaceutical sector in Libya is required in order to provide and sustain sound pharmaceutical services for Libyan society and improve the national public health outcomes. PMID:21483563

  13. Evaluation of LOINC for Representing Constitutional Cytogenetic Test Result Reports

    PubMed Central

    Heras, Yan Z.; Mitchell, Joyce A.; Williams, Marc S.; Brothman, Arthur R.; Huff, Stanley M.

    2009-01-01

    Genetic testing is becoming increasingly important to medical practice. Integrating genetics and genomics data into electronic medical records is crucial in translating genetic discoveries into improved patient care. Information technology, especially Clinical Decision Support Systems, holds great potential to help clinical professionals take full advantage of genomic advances in their daily medical practice. However, issues relating to standard terminology and information models for exchanging genetic testing results remain relatively unexplored. This study evaluates whether the current LOINC standard is adequate to represent constitutional cytogenetic test result reports using sample result reports from ARUP Laboratories. The results demonstrate that current standard terminology is insufficient to support the needs of coding cytogenetic test results. The terminology infrastructure must be developed before clinical information systems will be able to handle the high volumes of genetic data expected in the near future. PMID:20351857

  14. Evaluation of LOINC for representing constitutional cytogenetic test result reports.

    PubMed

    Heras, Yan Z; Mitchell, Joyce A; Williams, Marc S; Brothman, Arthur R; Huff, Stanley M

    2009-11-14

    Genetic testing is becoming increasingly important to medical practice. Integrating genetics and genomics data into electronic medical records is crucial in translating genetic discoveries into improved patient care. Information technology, especially Clinical Decision Support Systems, holds great potential to help clinical professionals take full advantage of genomic advances in their daily medical practice. However, issues relating to standard terminology and information models for exchanging genetic testing results remain relatively unexplored. This study evaluates whether the current LOINC standard is adequate to represent constitutional cytogenetic test result reports using sample result reports from ARUP Laboratories. The results demonstrate that current standard terminology is insufficient to support the needs of coding cytogenetic test results. The terminology infrastructure must be developed before clinical information systems will be able to handle the high volumes of genetic data expected in the near future.

  15. A clock transition in a solid-state system

    NASA Astrophysics Data System (ADS)

    Edge, G. J. A.; Potnis, S.; Vutha, A. C.

    2017-04-01

    With the impending redefinition of the SI second based on optical frequency standards, new secondary frequency standards are needed in order to form clock ensembles. Ideally such secondary standards will offer enhanced robustness, portability and high signal-to-noise ratios (SNR), to enable rapid and precise comparisons to be made against primary standards. A clock based on a narrow optical transition, in atoms that are doped into a solid-state host, offers the experimental simplicity and large SNR to satisfy these requirements. The intra-configuration 7F0 ->5D0 transition, in Sm2+ ions doped into a host crystal, is an attractive candidate for such secondary standards due to its low susceptibility to perturbations from the crystal environment. We present results from the interrogation of this clock transition with a narrow linewidth laser.

  16. Spatial service delivery system for smart licensing & enforcement management

    NASA Astrophysics Data System (ADS)

    Wahap, N. A.; Ismail, N. M.; Nor, N. M.; Ahmad, N.; Omar, M. F.; Termizi, A. A. A.; Zainal, D.; Noordin, N. M.; Mansor, S.

    2016-06-01

    Spatial information has introduced a new sense of urgency for a better understanding of the public needs in term of what, when and where they need services and through which devices, platform or physical locations they need them. The objective of this project is to value- add existing license management process for business premises which comes under the responsibility of Local Authority (PBT). Manipulation of geospatial and tracing technology via mobile platform allows enforcement officers to work in real-time, use a standardized system, improve service delivery, and optimize operation management. This paper will augment the scope and capabilities of proposed concept namely, Smart Licensing/Enforcement Management (SLEm). It will review the current licensing and enforcement practice of selected PBT in comparison to the enhanced method. As a result, the new enhanced system is expected to offer a total solution for licensing/enforcement management whilst increasing efficiency and transparency for smart city management and governance.

  17. Cryogenic insulation standard data and methodologies

    NASA Astrophysics Data System (ADS)

    Demko, J. A.; Fesmire, J. E.; Johnson, W. L.; Swanger, A. M.

    2014-01-01

    Although some standards exist for thermal insulation, few address the sub-ambient temperature range and cold-side temperatures below 100 K. Standards for cryogenic insulation systems require cryostat testing and data analysis that will allow the development of the tools needed by design engineers and thermal analysts for the design of practical cryogenic systems. Thus, this critically important information can provide reliable data and methodologies for industrial efficiency and energy conservation. Two Task Groups have been established in the area of cryogenic insulation systems Under ASTM International's Committee C16 on Thermal Insulation. These are WK29609 - New Standard for Thermal Performance Testing of Cryogenic Insulation Systems and WK29608 - Standard Practice for Multilayer Insulation in Cryogenic Service. The Cryogenics Test Laboratory of NASA Kennedy Space Center and the Thermal Energy Laboratory of LeTourneau University are conducting Inter-Laboratory Study (ILS) of selected insulation materials. Each lab carries out the measurements of thermal properties of these materials using identical flat-plate boil-off calorimeter instruments. Parallel testing will provide the comparisons necessary to validate the measurements and methodologies. Here we discuss test methods, some initial data in relation to the experimental approach, and the manner reporting the thermal performance data. This initial study of insulation materials for sub-ambient temperature applications is aimed at paving the way for further ILS comparative efforts that will produce standard data sets for several commercial materials. Discrepancies found between measurements will be used to improve the testing and data reduction techniques being developed as part of the future ASTM International standards.

  18. Static tests of the propulsion system. [Propfan Test Assessment program

    NASA Technical Reports Server (NTRS)

    Withers, C. C.; Bartel, H. W.; Turnberg, J. E.; Graber, E. J.

    1987-01-01

    Advanced, highly-loaded, high-speed propellers, called propfans, are promising to revolutionize the transport aircraft industry by offering a 15- to 30-percent fuel savings over the most advanced turbofans without sacrificing passenger comfort or violating community noise standards. NASA Lewis Research Center and industry have been working jointly to develop the needed propfan technology. The NASA-funded Propfan Test Assessment (PTA) Program represents a key element of this joint program. In PTA, Lockheed-Georgia, working in concert with Hamilton Standard, Rohr Industries, Gulfstream Aerospace, and Allison, is developing a propfan propulsion system which will be mounted on the left wing of a modified Gulfstream GII aircraft and flight tested to verify the in-flight characteristics of a 9-foot diameter, single-rotation propfan. The propfan, called SR-7L, was designed and fabricated by Hamilton Standard under a separate NASA contract. Prior to flight testing, the PTA propulsion system was static tested at the Rohr Brown Field facility. In this test, propulsion system operational capability was verified and data was obtained on propfan structural response, system acoustic characteristics, and system performance. This paper reports on the results of the static tests.

  19. 15/16 ips Operation of the Precision Instrument Company Model P15100 tape recorder to record the standard (30 Hz) NCER seismic data multiplex system

    USGS Publications Warehouse

    Eaton, Jerry P.

    1976-01-01

    In recent months the need has arisen to record special seismic networks consisting of a dozen or more standard NCER seismic systems telemetered to a central collection point on a reliable, portable, low-power tape recorder. Because of its simplicity and the ease with which it can be adapted for the purpose, the PI 5100 field recorder should be considered for such use. In the tests described here, a PI 5100 was speeded up to run at 15/16 inches per second (ips) and signals from the standard multiplex system test modulator bank were recorded on one tape track by means of a simple, improvised AM record amplifier. The results of these tests are extremely encouraging: the dynamic range of the system when played back on the Bell and Howell Model 3700 B reproduce machine, with subtractive compensation, is nearly as high as for the system employing the B&H 3700 B for recording. These notes indicate the principle employed to speed up the recorder, outline the circuit required to drive the tape heads in the AM record mode, and describe the tests carried out to evaluate the system's performance.

  20. ISBT 128: a global information standard

    PubMed Central

    2010-01-01

    ISBT 128 is the global standard for the identification, labeling and information transfer of human blood, cell, tissue and organ products across international borders and disparate health care systems. The system has been designed and perfected over almost two decades to ensure accuracy, safety and efficiency for the benefit of donors, patients and health care workers worldwide. The use of the ISBT 128 standard has grown steadily since a blood bank in Estonia first implemented it in 1997. Today, more than 3,500 facility identifiers for the use of ISBT 128 have been assigned to organizations in 67 countries on six continents. The standard has been accepted by a variety of international standard setting organizations and government regulators. It is managed by ICCBBA, a not-for-profit organization based in the USA that is governed by an international volunteer board of directors. Members of the Board of Directors represent the fields of practice affected by the standard. Advisory groups comprising international experts guide the ongoing development of the ISBT 128 standard to ensure it continues to meet the needs of its users. While there is a cost associated with the implementation and use of the standard, the clear benefits in terms of improved patient safety and ability to meet regulatory traceability requirements justify the costs. PMID:20652420

  1. Setting up the Sloan Digital Sky Survey Standard Star Network: The Starware

    NASA Astrophysics Data System (ADS)

    Smith, J. A.; Tucker, D. L.; Brinkmann, J.; Annis, J.; Briggs, J. W.; Doi, M.; Fukugita, M.; Gunn, J. E.; Hamabe, M.; Ichikawa, S.; Ichikawa, T.; Kent, S.; McKay, T. A.; McMillan, R.; Merrelli, A.; Newberg, H. J.; Richmond, M. W.; Watanabe, M.

    1998-12-01

    The Sloan Digital Sky Survey (SDSS) has achieved first light. Though still in the engineering shakedown year, the image quality of some of these early runs is useable for science results. Although similar to the Thuan-Gunn ugriz system, the SDSS u'g'r'i'z' system has wider effective bandwidths and covers almost the entire spectrum from the 3000 Angstroms/ to 11 000 Angstroms. This is a new photometric system; therefore, calibration of a network of primary standard stars is needed before the survey science results can be interpreted properly. Beginning in earnest in March 1998, we started the calibration observations to define the SDSS u'g'r'i'z' standard star system using the 40-inch Ritchey-Chretien telescope at the United States Naval Observatory's Flagstaff, Arizona Station. As described in the paper announcing the system [Fukugita et al. 1996], the zeropoints for each of the five filters will be set by the metal-poor F subdwarfs BD+17:4708, BD+26:2606 & BD+21:0607. In this paper, we describe the rest of the stars being considered as potential standards to define this new system, changes from the preliminary list presented last year [Smith et al. 1998], and give some early (NOT YET OFFICIAL) results. Descriptions of the reduction software (D.L. Tucker et al.) and the hardware used to obtain these observations (J. Brinkmann et al.) are described in companion posters.

  2. A call to action on women's health: putting corporate CSR standards for workplace health on the global health agenda.

    PubMed

    Wofford, David; MacDonald, Shawn; Rodehau, Carolyn

    2016-11-04

    Business operates within a Corporate Social Responsibility (CSR) system that the global health community should harness to advance women's health and related sustainable development goals for workers and communities in low- and middle-income countries. Corporations and their vast networks of supplier companies, particularly in manufacturing and agribusiness, employ millions of workers, increasingly comprised of young women, who lack access to health information, products and services. However, occupational safety and health practices focus primarily on safety issues and fail to address the health needs, including reproductive health, of women workers. CSR policy has focused on shaping corporate policies and practices related to the environment, labor, and human rights, but has also ignored the health needs of women workers. The authors present a new way for global health to understand CSR - as a set of regulatory processes governed by civil society, international institutions, business, and government that set, monitor, and enforce emerging standards related to the role of business in society. They call this the CSR system. They argue that the global health community needs to think differently about the role of corporations in public health, which has been as "partners," and that the global health practitioners should play the same advocacy role in the CSR system for corporate health policies as it does for government and international health policies.

  3. Comparison and Analysis of ISO/IEEE 11073, IHE PCD-01, and HL7 FHIR Messages for Personal Health Devices

    PubMed Central

    Do, Hyoungho

    2018-01-01

    Objectives Increasing use of medical devices outside of healthcare facilities inevitably requires connectivity and interoperability between medical devices and healthcare information systems. To this end, standards have been developed and used to provide interoperability between personal health devices (PHDs) and external systems. ISO/IEEE 11073 standards and IHE PCD-01 standard messages have been used the most in the exchange of observation data of health devices. Recently, transmitting observation data using the HL7 FHIR standard has been devised in the name of DoF (Devices on FHIR) and adopted very fast. We compare and analyze these standards and suggest that which standard will work best at the different environments of device usage. Methods We generated each message/resource of the three standards for observed vital signs from blood pressure monitor and thermometer. Then, the size, the contents, and the exchange processes of these messages are compared and analyzed. Results ISO/IEEE 11073 standard message has the smallest data size, but it has no ability to contain the key information, patient information. On the other hand, PCD-01 messages and FHIR standards have the fields for patient information. HL7 DoF standards provide reusing of information unit known as resource, and it is relatively easy to parse DoF messages since it uses widely known XML and JSON. Conclusions ISO/IEEE 11073 standards are suitable for devices having very small computing power. IHE PCD-01 and HL7 DoF messages can be used for the devices that need to be connected to hospital information systems that require patient information. When information reuse is frequent, DoF is advantageous over PCD-01. PMID:29503752

  4. Comparison and Analysis of ISO/IEEE 11073, IHE PCD-01, and HL7 FHIR Messages for Personal Health Devices.

    PubMed

    Lee, Sungkee; Do, Hyoungho

    2018-01-01

    Increasing use of medical devices outside of healthcare facilities inevitably requires connectivity and interoperability between medical devices and healthcare information systems. To this end, standards have been developed and used to provide interoperability between personal health devices (PHDs) and external systems. ISO/IEEE 11073 standards and IHE PCD-01 standard messages have been used the most in the exchange of observation data of health devices. Recently, transmitting observation data using the HL7 FHIR standard has been devised in the name of DoF (Devices on FHIR) and adopted very fast. We compare and analyze these standards and suggest that which standard will work best at the different environments of device usage. We generated each message/resource of the three standards for observed vital signs from blood pressure monitor and thermometer. Then, the size, the contents, and the exchange processes of these messages are compared and analyzed. ISO/IEEE 11073 standard message has the smallest data size, but it has no ability to contain the key information, patient information. On the other hand, PCD-01 messages and FHIR standards have the fields for patient information. HL7 DoF standards provide reusing of information unit known as resource, and it is relatively easy to parse DoF messages since it uses widely known XML and JSON. ISO/IEEE 11073 standards are suitable for devices having very small computing power. IHE PCD-01 and HL7 DoF messages can be used for the devices that need to be connected to hospital information systems that require patient information. When information reuse is frequent, DoF is advantageous over PCD-01.

  5. Integrating information from disparate sources: the Walter Reed National Surgical Quality Improvement Program Data Transfer Project.

    PubMed

    Nelson, Victoria; Nelson, Victoria Ruth; Li, Fiona; Green, Susan; Tamura, Tomoyoshi; Liu, Jun-Min; Class, Margaret

    2008-11-06

    The Walter Reed National Surgical Quality Improvement Program Data Transfer web module integrates with medical and surgical information systems, and leverages outside standards, such as the National Library of Medicine's RxNorm, to process surgical and risk assessment data. Key components of the project included a needs assessment with nurse reviewers and a data analysis for federated (standards were locally controlled) data sources. The resulting interface streamlines nurse reviewer workflow by integrating related tasks and data.

  6. Burdensome and Unnecessary Reporting Requirements of the Public Utility Regulatory Policies Act Need to be Changed.

    DTIC Science & Technology

    1981-09-14

    Commissioners PURPA Public Utility Regulatory Policies Act %GLOSSAk(¥ Aavertising standard As aefineu oy PUijA, no electric utility may recover from any per- son...systems in 4o States, vuerto kico, (uam, and virgin Islanus. Automatic adjustment As detined by PURPA , no electric clause stanuard utility may increase any...Interruptiole rate standard As defined by PURPA , a rate oftereu to eacn industrial and commercial * electric consumer tnat snail retiect the cost of

  7. ATCA for Machines-- Advanced Telecommunications Computing Architecture

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Larsen, R.S.; /SLAC

    2008-04-22

    The Advanced Telecommunications Computing Architecture is a new industry open standard for electronics instrument modules and shelves being evaluated for the International Linear Collider (ILC). It is the first industrial standard designed for High Availability (HA). ILC availability simulations have shown clearly that the capabilities of ATCA are needed in order to achieve acceptable integrated luminosity. The ATCA architecture looks attractive for beam instruments and detector applications as well. This paper provides an overview of ongoing R&D including application of HA principles to power electronics systems.

  8. Standardization and Implementation of a Standard Emergency Code Call System within Estern Region Medical Command

    DTIC Science & Technology

    2009-03-01

    currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 21-04-2009 2. REPORT TYPE...morph with the advent of the personal computer. Instead, they went out of business . A similar situation exists with the Ford, Chrysler and GM, where...This dissent needs a constructive forum or outlet so outside-the-box solutions and better business practices have a nurturing environment for

  9. Otto engine beyond its standard quantum limit.

    PubMed

    Leggio, Bruno; Antezza, Mauro

    2016-02-01

    We propose a quantum Otto cycle based on the properties of a two-level system in a realistic out-of-thermal-equilibrium electromagnetic field acting as its sole reservoir. This steady configuration is produced without the need of active control over the state of the environment, which is a noncoherent thermal radiation, sustained only by external heat supplied to macroscopic objects. Remarkably, even for nonideal finite-time transformations, it largely over-performs the standard ideal Otto cycle and asymptotically achieves unit efficiency at finite power.

  10. A computer-based specification methodology

    NASA Technical Reports Server (NTRS)

    Munck, Robert G.

    1986-01-01

    Standard practices for creating and using system specifications are inadequate for large, advanced-technology systems. A need exists to break away from paper documents in favor of documents that are stored in computers and which are read and otherwise used with the help of computers. An SADT-based system, running on the proposed Space Station data management network, could be a powerful tool for doing much of the required technical work of the Station, including creating and operating the network itself.

  11. Business Systems Modernization: Strategy for Evolving DOD’s Business Enterprise Architecture Offers a Conceptual Approach, but Execution Details are Needed

    DTIC Science & Technology

    2007-04-01

    Services and System Capabilities Enterprise Rules and Standards for Interoperability Navy AFArmy TRANS COM DFASDLA Ente prise Shared Services and System...Where commonality among components exists, there are also opportunities for identifying and leveraging shared services . A service-oriented architecture...and (3) shared services . The BMA federation strategy, according to these officials, is the first mission area federation strategy, and it is their

  12. Workstation Segment Specification for the World-Wide Military Command and Control (WWMCCS) Information System (WIS)

    DTIC Science & Technology

    1989-07-01

    software eventually, and which indicate the general thrust of evolution and growth capabilities required of the workstation segment. These GRAY sections...configuration control over the evolution of the system. (" - The transition from the WWMCCS Standard ADP system to WIS will be gradual and will be...has been designed to support the workstation needs required for most WIS users, and is the workstation that will support the long-term evolution of

  13. Concept of Integrated Information Systems of Rail Transport

    NASA Astrophysics Data System (ADS)

    Siergiejczyk, Mirosław; Gago, Stanisław

    This paper will present a need to create integrated information systems of the rail transport and their links with other means of public transportation. IT standards will be discussed that are expected to create the integrated information systems of the rail transport. Also the main tasks will be presented of centralized information systems, the concept of their architecture, business processes and their implementation as well as the proposed measures to secure data. A method shall be proposed to implement a system to inform participants of rail transport in Polish conditions.

  14. Prognostics and Health Management in Nuclear Power Plants: A Review of Technologies and Applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Coble, Jamie B.; Ramuhalli, Pradeep; Bond, Leonard J.

    This report reviews the current state of the art of prognostics and health management (PHM) for nuclear power systems and related technology currently applied in field or under development in other technological application areas, as well as key research needs and technical gaps for increased use of PHM in nuclear power systems. The historical approach to monitoring and maintenance in nuclear power plants (NPPs), including the Maintenance Rule for active components and Aging Management Plans for passive components, are reviewed. An outline is given for the technical and economic challenges that make PHM attractive for both legacy plants through Lightmore » Water Reactor Sustainability (LWRS) and new plant designs. There is a general introduction to PHM systems for monitoring, fault detection and diagnostics, and prognostics in other, non-nuclear fields. The state of the art for health monitoring in nuclear power systems is reviewed. A discussion of related technologies that support the application of PHM systems in NPPs, including digital instrumentation and control systems, wired and wireless sensor technology, and PHM software architectures is provided. Appropriate codes and standards for PHM are discussed, along with a description of the ongoing work in developing additional necessary standards. Finally, an outline of key research needs and opportunities that must be addressed in order to support the application of PHM in legacy and new NPPs is presented.« less

  15. A Reliable Wireless Control System for Tomato Hydroponics

    PubMed Central

    Ibayashi, Hirofumi; Kaneda, Yukimasa; Imahara, Jungo; Oishi, Naoki; Kuroda, Masahiro; Mineno, Hiroshi

    2016-01-01

    Agricultural systems using advanced information and communication (ICT) technology can produce high-quality crops in a stable environment while decreasing the need for manual labor. The system collects a wide variety of environmental data and provides the precise cultivation control needed to produce high value-added crops; however, there are the problems of packet transmission errors in wireless sensor networks or system failure due to having the equipment in a hot and humid environment. In this paper, we propose a reliable wireless control system for hydroponic tomato cultivation using the 400 MHz wireless band and the IEEE 802.15.6 standard. The 400 MHz band, which is lower than the 2.4 GHz band, has good obstacle diffraction, and zero-data-loss communication is realized using the guaranteed time-slot method supported by the IEEE 802.15.6 standard. In addition, this system has fault tolerance and a self-healing function to recover from faults such as packet transmission failures due to deterioration of the wireless communication quality. In our basic experiments, the 400 MHz band wireless communication was not affected by the plants’ growth, and the packet error rate was less than that of the 2.4 GHz band. In summary, we achieved a real-time hydroponic liquid supply control with no data loss by applying a 400 MHz band WSN to hydroponic tomato cultivation. PMID:27164105

  16. A Reliable Wireless Control System for Tomato Hydroponics.

    PubMed

    Ibayashi, Hirofumi; Kaneda, Yukimasa; Imahara, Jungo; Oishi, Naoki; Kuroda, Masahiro; Mineno, Hiroshi

    2016-05-05

    Agricultural systems using advanced information and communication (ICT) technology can produce high-quality crops in a stable environment while decreasing the need for manual labor. The system collects a wide variety of environmental data and provides the precise cultivation control needed to produce high value-added crops; however, there are the problems of packet transmission errors in wireless sensor networks or system failure due to having the equipment in a hot and humid environment. In this paper, we propose a reliable wireless control system for hydroponic tomato cultivation using the 400 MHz wireless band and the IEEE 802.15.6 standard. The 400 MHz band, which is lower than the 2.4 GHz band, has good obstacle diffraction, and zero-data-loss communication is realized using the guaranteed time-slot method supported by the IEEE 802.15.6 standard. In addition, this system has fault tolerance and a self-healing function to recover from faults such as packet transmission failures due to deterioration of the wireless communication quality. In our basic experiments, the 400 MHz band wireless communication was not affected by the plants' growth, and the packet error rate was less than that of the 2.4 GHz band. In summary, we achieved a real-time hydroponic liquid supply control with no data loss by applying a 400 MHz band WSN to hydroponic tomato cultivation.

  17. User-oriented end-to-end transport protocols for the real-time distribution of telemetry data from NASA spacecraft

    NASA Technical Reports Server (NTRS)

    Hooke, A. J.

    1979-01-01

    A set of standard telemetry protocols for downlink data flow facilitating the end-to-end transport of instrument data from the spacecraft to the user in real time is proposed. The direct switching of data by autonomous message 'packets' that are assembled by the source instrument on the spacecraft is discussed. The data system consists thus of a format on a message rather than word basis, and such packet telemetry would include standardized protocol headers. Standards are being developed within the NASA End-to-End Data System (NEEDS) program for the source packet and transport frame protocols. The source packet protocol contains identification of both the sequence number of the packet as it is generated by the source and the total length of the packet, while the transport frame protocol includes a sequence count defining the serial number of the frame as it is generated by the spacecraft data system, and a field specifying any 'options' selected in the format of the frame itself.

  18. IMIRSEL: a secure music retrieval testing environment

    NASA Astrophysics Data System (ADS)

    Downie, John S.

    2004-10-01

    The Music Information Retrieval (MIR) and Music Digital Library (MDL) research communities have long noted the need for formal evaluation mechanisms. Issues concerning the unavailability of freely-available music materials have greatly hindered the creation of standardized test collections with which these communities could scientifically assess the strengths and weaknesses of their various music retrieval techniques. The International Music Information Retrieval Systems Evaluation Laboratory (IMIRSEL) is being developed at the University of Illinois at Urbana-Champaign (UIUC) specifically to overcome this hindrance to the scientific evaluation of MIR/MDL systems. Together with its subsidiary Human Use of Music Information Retrieval Systems (HUMIRS) project, IMIRSEL will allow MIR/MDL researchers access to the standardized large-scale collection of copyright-sensitive music materials and standardized test queries being housed at UIUC's National Center for Supercomputing Applications (NCSA). Virtual Research Labs (VRL), based upon NCSA's Data-to-Knowledge (D2K) tool set, are being developed through which MIR/MDL researchers will interact with the music materials under a "trusted code" security model.

  19. Ex-vivo perfusion of donor hearts for human heart transplantation (PROCEED II): a prospective, open-label, multicentre, randomised non-inferiority trial.

    PubMed

    Ardehali, Abbas; Esmailian, Fardad; Deng, Mario; Soltesz, Edward; Hsich, Eileen; Naka, Yoshifumi; Mancini, Donna; Camacho, Margarita; Zucker, Mark; Leprince, Pascal; Padera, Robert; Kobashigawa, Jon

    2015-06-27

    The Organ Care System is the only clinical platform for ex-vivo perfusion of human donor hearts. The system preserves the donor heart in a warm beating state during transport from the donor hospital to the recipient hospital. We aimed to assess the clinical outcomes of the Organ Care System compared with standard cold storage of human donor hearts for transplantation. We did this prospective, open-label, multicentre, randomised non-inferiority trial at ten heart-transplant centres in the USA and Europe. Eligible heart-transplant candidates (aged >18 years) were randomly assigned (1:1) to receive donor hearts preserved with either the Organ Care System or standard cold storage. Participants, investigators, and medical staff were not masked to group assignment. The primary endpoint was 30 day patient and graft survival, with a 10% non-inferiority margin. We did analyses in the intention-to-treat, as-treated, and per-protocol populations. This trial is registered with ClinicalTrials.gov, number NCT00855712. Between June 29, 2010, and Sept 16, 2013, we randomly assigned 130 patients to the Organ Care System group (n=67) or the standard cold storage group (n=63). 30 day patient and graft survival rates were 94% (n=63) in the Organ Care System group and 97% (n=61) in the standard cold storage group (difference 2·8%, one-sided 95% upper confidence bound 8·8; p=0·45). Eight (13%) patients in the Organ Care System group and nine (14%) patients in the standard cold storage group had cardiac-related serious adverse events. Heart transplantation using donor hearts adequately preserved with the Organ Care System or with standard cold storage yield similar short-term clinical outcomes. The metabolic assessment capability of the Organ Care System needs further study. TransMedics. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Evaluation of ISO EN 13606 as a result of its implementation in XML

    PubMed Central

    Sun, Shanghua; Hassan, Taher; Kalra, Dipak

    2013-01-01

    The five parts of the ISO EN 13606 standard define a means by which health-care records can be exchanged between computer systems. Starting within the European standardisation process, it has now become internationally ratified in ISO. However, ISO standards do not require that a reference implementation be provided, and in order for ISO EN 13606 to deliver the expected benefits, it must be provided not as a document, but as an operational system that is not vendor specific. This article describes the evolution of an Extensible Markup Language (XML) Schema through three iterations, each of which emphasised one particular approach to delivering an executable equivalent to the printed standard. Developing these operational versions and incorporating feedback from users of these demonstrated where implementation compromises were needed and exposed defects in the standard. These are discussed herein. They may require a future technical revision to ISO EN 13606 to resolve the issues identified. PMID:23995217

  1. The 2017 International Joint Working Group White Paper by INDUSEM, the Emergency Medicine Association and the Academic College of Emergency Experts on Establishing Standardized Regulations, Operational Mechanisms, and Accreditation Pathways for Education and Care Provided by the Prehospital Emergency Medical Service Systems in India

    PubMed Central

    Sikka, Veronica; Gautam, V.; Galwankar, Sagar; Guleria, Randeep; Stawicki, Stanislaw P.; Paladino, Lorenzo; Chauhan, Vivek; Menon, Geetha; Shah, Vijay; Srivastava, R. P.; Rana, B. K.; Batra, Bipin; Kalra, OP.; Aggarwal, P.; Bhoi, Sanjeev; Krishnan, S. Vimal

    2017-01-01

    The government of India has done remarkable work on commissioning a government funded prehospital emergency ambulance service in India. This has both public health implications and an economic impact on the nation. With the establishment of these services, there is an acute need for standardization of education and quality assurance regarding prehospital care provided. The International Joint Working Group has been actively involved in designing guidelines and establishing a comprehensive framework for ensuring high-quality education and clinical standards of care for prehospital services in India. This paper provides an independent expert opinion and a proposed framework for general operations and administration of a standardized, national prehospital emergency medical systems program. Program implementation, operational details, and regulations will require close collaboration between key stakeholders, including local, regional, and national governmental agencies of India. PMID:28855780

  2. Academy of Nutrition and Dietetics: Standards of professional performance for Registered Dietitian Nutritionists (Competent, Proficient, and Expert) in Sustainable, Resilient, and Healthy Food and Water Systems.

    PubMed

    Tagtow, Angie; Robien, Kim; Bergquist, Erin; Bruening, Meg; Dierks, Lisa; Hartman, Barbara E; Robinson-O'Brien, Ramona; Steinitz, Tamara; Tahsin, Bettina; Underwood, Teri; Wilkins, Jennifer

    2014-03-01

    Sustainability is the ability of a system to be maintained over the long term. Resilience is the ability of a system to withstand disturbances and continue to function in a sustainable manner. Issues of sustainability and resilience apply to all aspects of nutrition and dietetics practice, can be practiced at both the program and systems level, and are broader than any one specific practice setting or individual intervention. Given an increasing need to apply principles of sustainability and resilience to nutrition and dietetics practice, as well as growing interest among the public and by Registered Dietitian Nutritionists of health issues related to food and water systems, the Hunger and Environmental Nutrition Dietetic Practice Group, with guidance from the Academy of Nutrition and Dietetics Quality Management Committee, has developed the Standards of Professional Performance as a tool for Registered Dietitian Nutritionists working in sustainable, resilient, and healthy food and water systems to assess their current skill levels and to identify areas for further professional development in this emerging practice area. This Standards of Professional Performance document covers six standards of professional performance: quality in practice, competence and accountability, provision of services, application of research, communication and application of knowledge, and utilization and management of resources. Within each standard, specific indicators provide measurable action statements that illustrate how sustainable, resilient, and healthy food and water systems principles can be applied to practice. The indicators describe three skill levels (competent, proficient, and expert) for Registered Dietitian Nutritionists working in sustainable, resilient, and healthy food and water systems. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  3. System 80+{trademark} standard design incorporates radiation protection lessons learned

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Crom, T.D.; Naugle, C.L.; Turk, R.S.

    1995-03-01

    Many lessons have been learned from the current generation of nuclear plants in the area of radiation protection. The following paper will outline how the lessons learned have been incorporated into the design and operational philosophy of the System 80+{trademark} Standard Design currently under development by ABB Combustion Engineering (ABB-CE) with support from Duke Engineering and Services, Inc. and Stone and Webster Engineering Corporation in the Balance-of-Plant design. The System 80+{trademark} Standard Design is a complete nuclear power plant for national and international markets, designed in direct response to utility needs for the 1990`s, and scheduled for Nuclear Regulatory Commissionmore » (NRC) Design Certification under the new standardization rule (10 CFR Part 52). System 80+{trademark} is a natural extension of System 80{sup R} technology, an evolutionary change based on proven Nuclear Steam Supply System (NSSS) in operation at Palo Verde in Arizona and under construction at Yonggwang in the Republic of Korea. The System 80+{trademark} Containment and much of the Balance of Plant design is based upon Duke Power Company`s Cherokee Plant, which was partially constructed in the late 1970`s, but, was later canceled (due to rapid declined in electrical load growth). The System 80+{trademark} Standard Design meets the requirements given in the Electric Power Research Institute (EPRI) Advanced Light Water Reactor (ALWR) Requirements Document. One of these requirements is to limit the occupational exposure to 100 person-rem/yr. This paper illustrates how this goal can be achieved through the incorporation of lessons learned, innovative design, and the implementation of a common sense approach to operation and maintenances practices.« less

  4. Rescuing Students from the Slow Learner Trap

    ERIC Educational Resources Information Center

    Shaw, Steven R.

    2010-01-01

    Slow learners, such as students with borderline intellectual functioning, represent one of the most challenging student populations for administrators and teachers. Standard systems and supports are often ineffective--even counterproductive--because they fail to meet students' specific learning needs and instead create a cycle of failure. This…

  5. Strategic Planning to Improve EHDI Programs

    ERIC Educational Resources Information Center

    White, Karl R.; Blaiser, Kristina M.

    2011-01-01

    Because newborn hearing screening has become the standard of care in the United States, every state has established an early hearing detection and intervention (EHDI) program responsible for establishing, maintaining, and improving the system of services needed to serve children with hearing loss and their families. While significant developments…

  6. Multiple Attribute Evaluation Of Auditory Warning Signals For In-Vehicle Crash Avoidance Warning Systems, Technical Report

    DOT National Transportation Integrated Search

    1995-11-01

    THIS RESEARCH WAS DIRECTED AT OPTIMIZING THE AUDITORY WARNINGS THAT MAY BE USED IN FUTURE CRASH AVOIDANCE WARNING APPLICATIONS. THERE IS A NEED TO STANDARDIZE SUCH WARNINGS, SO THAT THEY RETAIN IMMEDIACY OF MEANING ACROSS VARIOUS VEHICLES, SITUATIONS...

  7. 24 CFR 84.22 - Payment.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Financial and Program Management § 84.22 Payment. (a... management systems that meet the standards for fund control and accountability as established in § 84.21. Cash advances to a recipient organization shall be limited to the minimum amounts needed and be timed...

  8. 24 CFR 84.22 - Payment.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Financial and Program Management § 84.22 Payment. (a... management systems that meet the standards for fund control and accountability as established in § 84.21. Cash advances to a recipient organization shall be limited to the minimum amounts needed and be timed...

  9. PATHOGENS OF CONCERN AND THE NEED FOR ANALYTICAL METHODS DEVELOPMENT, STANDARDIZATION, AND VALIDATION.

    EPA Science Inventory

    Municipal wastewaters receive discharges from homes, commercial establishments, industry and hospitals. Combined sewer systems carry waste from all the above sources as well as storm water. Within such mixtures are the microorganisms which reside in virtually all parts of the s...

  10. 40 CFR 63.1082 - What definitions do I need to know?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) National Emission Standards for Ethylene Manufacturing Process Units: Heat Exchange Systems and Waste... resulting from the quench and compression of cracked gas (the cracking furnace effluent) at an ethylene... within an ethylene production unit. Process wastewater is not organic wastes, process fluids, product...

  11. Monte Carlo efficiency calibration of a neutron generator-based total-body irradiator

    USDA-ARS?s Scientific Manuscript database

    The increasing prevalence of obesity world-wide has focused attention on the need for accurate body composition assessments, especially of large subjects. However, many body composition measurement systems are calibrated against a single-sized phantom, often based on the standard Reference Man mode...

  12. Monte carlo efficiency calibration of a neutron generator-based total-body irradiator

    USDA-ARS?s Scientific Manuscript database

    The increasing prevalence of obesity world-wide has focused attention on the need for accurate body composition assessments, especially of large subjects. However, many body composition measurement systems are calibrated against a single-sized phantom, often based on the standard Reference Man mode...

  13. School-Based HIV-AIDS Education in Canada.

    ERIC Educational Resources Information Center

    Allan, Margaret C.

    Health and education matters in Canada are the responsibility of the government of each individual province. These opportunities for improvement in the Canadian system regarding Acquired Immune Deficiency Syndrome (AIDS) education exist. First, a nationally standardized curriculum is needed. Second, more time allocated for AIDS education is…

  14. Quantification of genetically modified soybeans using a combination of a capillary-type real-time PCR system and a plasmid reference standard.

    PubMed

    Toyota, Akie; Akiyama, Hiroshi; Sugimura, Mitsunori; Watanabe, Takahiro; Kikuchi, Hiroyuki; Kanamori, Hisayuki; Hino, Akihiro; Esaka, Muneharu; Maitani, Tamio

    2006-04-01

    Because the labeling of grains and feed- and foodstuffs is mandatory if the genetically modified organism (GMO) content exceeds a certain level of approved genetically modified varieties in many countries, there is a need for a rapid and useful method of GMO quantification in food samples. In this study, a rapid detection system was developed for Roundup Ready Soybean (RRS) quantification using a combination of a capillary-type real-time PCR system, a LightCycler real-time PCR system, and plasmid DNA as the reference standard. In addition, we showed for the first time that the plasmid and genomic DNA should be similar in the established detection system because the PCR efficiencies of using plasmid DNA and using genomic DNA were not significantly different. The conversion factor (Cf) to calculate RRS content (%) was further determined from the average value analyzed in three laboratories. The accuracy and reproducibility of this system for RRS quantification at a level of 5.0% were within a range from 4.46 to 5.07% for RRS content and within a range from 2.0% to 7.0% for the relative standard deviation (RSD) value, respectively. This system rapidly monitored the labeling system and had allowable levels of accuracy and precision.

  15. Optical sensing system based on wireless paired emitter detector diode device and ionogels for lab-on-a-disc water quality analysis.

    PubMed

    Czugala, Monika; Gorkin, Robert; Phelan, Thomas; Gaughran, Jennifer; Curto, Vincenzo Fabio; Ducrée, Jens; Diamond, Dermot; Benito-Lopez, Fernando

    2012-12-07

    This work describes the first use of a wireless paired emitter detector diode device (PEDD) as an optical sensor for water quality monitoring in a lab-on-a-disc device. The microfluidic platform, based on an ionogel sensing area combined with a low-cost optical sensor, is applied for quantitative pH and qualitative turbidity monitoring of water samples at point-of-need. The autonomous capabilities of the PEDD system, combined with the portability and wireless communication of the full device, provide the flexibility needed for on-site water testing. Water samples from local fresh and brackish sources were successfully analysed using the device, showing very good correlation with standard bench-top systems.

  16. [Current situation and development trend of Chinese medicine information research].

    PubMed

    Dong, Yan; Cui, Meng

    2013-04-01

    Literature resource service was the main service that Chinese medicine (CM) information offered. But in recent years users have started to request the health information knowledge service. The CM information researches and application service mainly included: (1) the need of strength studies on theory, application of technology, information retrieval, and information standard development; (2) Information studies need to support clinical decision making, new drug research; (3) Quick response based on the network monitoring and support to emergency countermeasures. CM information researches have the following treads: (1) developing the theory system structure of CM information; (2) studying the methodology system of CM information; (3) knowledge discovery and knowledge innovation.

  17. A framework for capturing clinical data sets from computerized sources.

    PubMed

    McDonald, C J; Overhage, J M; Dexter, P; Takesue, B Y; Dwyer, D M

    1997-10-15

    The pressure to improve health care and provide better care at a lower cost has generated the need for efficient capture of clinical data. Many data sets are now being defined to analyze health care. Historically, review and research organizations have simply determined what data they wanted to collect, developed forms, and then gathered the information through chart review without regard to what is already available institutionally in computerized databases. Today, much electronic patient information is available in operational data systems (for example, laboratory systems, pharmacy systems, and surgical scheduling systems) and is accessible by agencies and organizations through standards for messages, codes, and encrypted electronic mail. Such agencies and organizations should define the elements of their data sets in terms of standardized operational data, and data producers should fully adopt these code and message standards. The Health Plan Employer Data and Information Set and the Council of State and Territorial Epidemiologists in collaboration with the Centers for Disease Control and Prevention and the Association of State and Territorial Public Health Laboratory Directors provide examples of how this can be done.

  18. Aeronautical Mobile Airport Communications System (AeroMACS)

    NASA Technical Reports Server (NTRS)

    Budinger, James M.; Hall, Edward

    2011-01-01

    To help increase the capacity and efficiency of the nation s airports, a secure wideband wireless communications system is proposed for use on the airport surface. This paper provides an overview of the research and development process for the Aeronautical Mobile Airport Communications System (AeroMACS). AeroMACS is based on a specific commercial profile of the Institute of Electrical and Electronics Engineers (IEEE) 802.16 standard known as Wireless Worldwide Interoperability for Microwave Access or WiMAX (WiMax Forum). The paper includes background on the need for global interoperability in air/ground data communications, describes potential AeroMACS applications, addresses allocated frequency spectrum constraints, summarizes the international standardization process, and provides findings and recommendations from the world s first AeroMACS prototype implemented in Cleveland, Ohio, USA.

  19. Flexible medical image management using service-oriented architecture.

    PubMed

    Shaham, Oded; Melament, Alex; Barak-Corren, Yuval; Kostirev, Igor; Shmueli, Noam; Peres, Yardena

    2012-01-01

    Management of medical images increasingly involves the need for integration with a variety of information systems. To address this need, we developed Content Management Offering (CMO), a platform for medical image management supporting interoperability through compliance with standards. CMO is based on the principles of service-oriented architecture, implemented with emphasis on three areas: clarity of business process definition, consolidation of service configuration management, and system scalability. Owing to the flexibility of this platform, a small team is able to accommodate requirements of customers varying in scale and in business needs. We describe two deployments of CMO, highlighting the platform's value to customers. CMO represents a flexible approach to medical image management, which can be applied to a variety of information technology challenges in healthcare and life sciences organizations.

  20. Obtaining greater value from health care: the roles of the U.S. government.

    PubMed

    Schoenbaum, Stephen C; Audet, Anne-Marie J; Davis, Karen

    2003-01-01

    The problems of quality and cost in the U.S. health care system are unlikely to be solved without strong leadership from the federal government, which can mobilize action to set national priorities for quality; develop and promulgate standards for care; and stimulate implementation of performance measures and standards for providers. All of these functions would best be carried out by a new federal agency. Furthermore, the federal government should design payment policies based on the performance standards, invest in needed information technology, and invest in research related to improving care and in training professionals to support nationwide quality improvement.

  1. The Apollo Accreditation Program: A web-based Joint Commission International standards compliance management tool.

    PubMed

    Dewan, Shaveta; Sibal, Anupam; Uberoi, R S; Kaur, Ishneet; Nayak, Yogamaya; Kar, Sujoy; Loria, Gaurav; Yatheesh, G; Balaji, V

    2014-01-01

    Creating and implementing processes to deliver quality care in compliance with accreditation standards is a challenging task but even more daunting is sustaining these processes and systems. There is need for frequent monitoring of the gap between the expected level of care and the level of care actually delivered so as to achieve consistent level of care. The Apollo Accreditation Program (AAP) was implemented as a web-based single measurable dashboard to display, measure and compare compliance levels for established standards of care in JCI accredited hospitals every quarter and resulted in an overall 15.5% improvement in compliance levels over one year.

  2. Two paths from lab to market: Product and standard

    NASA Astrophysics Data System (ADS)

    Knapp, Robert H.

    2018-01-01

    To shed light on the movement of sustainable technologies from basic science to widespread use, this chapter describes key aspects of the quite different paths followed by two important examples—photovoltaics (a product) and passive-house buildings (a standard). Discussion of photovoltaics includes the experience curve concept, the increasing significance of balance-of-system costs, and the importance of market heterogeneity (niches and sub-national markets) to the long-term trajectory of major cost reductions. Discussion of passive-houses highlights the array of technical developments needed for present-day energy efficient houses, and the relevance of "stretch" standards to the development of a market for very high-performance houses.

  3. Food control from farm to fork: implementing the standards of Codex and the OIE.

    PubMed

    Hathaway, S C

    2013-08-01

    The Codex Alimentarius (Codex) international food standards help to ensure food safety and promote fair practices in the international food trade. Implementing these standards using a risk management framework (RMF) approach to decision-making is an increasingly common aspect of the food control programmes of national governments. The Codex Alimentarius Commission (CAC) provides guidance at both the system and food commodity levels. In the case of zoonoses, similarities in the risk analysis methodologies used to underpin standard setting by the CAC and the World Organisation for Animal Health (OIE) are highly enabling of integrated food control systems. The CAC and the OIE are increasingly working together to develop their respective standards for foodborne zoonoses and other hazards so that they are non-duplicative, cohesive and utilise the whole food chain. There is a clear need for effective integration of food safety and animal health monitoring and surveillance information to better control foodborne zoonoses. This is increasingly supported by Codex and OIE standards working together in a variety of ways and realisation of benefits is highly dependent on coordination and sharing of information between Competent Authorities and other food safety stakeholders at the national level.

  4. Flight Dynamic Model Exchange using XML

    NASA Technical Reports Server (NTRS)

    Jackson, E. Bruce; Hildreth, Bruce L.

    2002-01-01

    The AIAA Modeling and Simulation Technical Committee has worked for several years to develop a standard by which the information needed to develop physics-based models of aircraft can be specified. The purpose of this standard is to provide a well-defined set of information, definitions, data tables and axis systems so that cooperating organizations can transfer a model from one simulation facility to another with maximum efficiency. This paper proposes using an application of the eXtensible Markup Language (XML) to implement the AIAA simulation standard. The motivation and justification for using a standard such as XML is discussed. Necessary data elements to be supported are outlined. An example of an aerodynamic model as an XML file is given. This example includes definition of independent and dependent variables for function tables, definition of key variables used to define the model, and axis systems used. The final steps necessary for implementation of the standard are presented. Software to take an XML-defined model and import/export it to/from a given simulation facility is discussed, but not demonstrated. That would be the next step in final implementation of standards for physics-based aircraft dynamic models.

  5. Just in Time in Space or Space Based JIT

    NASA Technical Reports Server (NTRS)

    VanOrsdel, Kathleen G.

    1995-01-01

    Our satellite systems are mega-buck items. In today's cost conscious world, we need to reduce the overall costs of satellites if our space program is to survive. One way to accomplish this would be through on-orbit maintenance of parts on the orbiting craft. In order to accomplish maintenance at a low cost I advance the hypothesis of having parts and pieces (spares) waiting. Waiting in the sense of having something when you need it, or just-in-time. The JIT concept can actually be applied to space processes. Its definition has to be changed just enough to encompass the needs of space. Our space engineers tell us which parts and pieces the satellite systems might be needing once in orbit. These items are stored in space for the time of need and can be ready when they are needed -- or Space Based JIT. When a system has a problem, the repair facility is near by and through human or robotics intervention, it can be brought back into service. Through a JIT process, overall system costs could be reduced as standardization of parts is built into satellite systems to facilitate reduced numbers of parts being stored. Launch costs will be contained as fewer spare pieces need to be included in the launch vehicle and the space program will continue to thrive even in this era of reduced budgets. The concept of using an orbiting parts servicer and human or robotics maintenance/repair capabilities would extend satellite life-cycle and reduce system replacement launches. Reductions of this nature throughout the satellite program result in cost savings.

  6. Observations to support adaptation: Principles, scales and decision-making

    NASA Astrophysics Data System (ADS)

    Pulwarty, R. S.

    2012-12-01

    As has been long noted, a comprehensive, coordinated observing system is the backbone of any Earth information system. Demands are increasingly placed on earth observation and prediction systems and attendant services to address the needs of economically and environmentally vulnerable sectors and investments, including energy, water, human health, transportation, agriculture, fisheries, tourism, biodiversity, and national security. Climate services include building capacity to interpret information and recognize standards and limitations of data in the promotion of social and economic development in a changing climate. This includes improving the understanding of climate in the context of a variety of temporal and spatial scales (including the influence of decadal scale forcings and land surface feedbacks on seasonal forecast reliability). Climate data and information are central for developing decision options that are sensitive to climate-related uncertainties and the design of flexible adaptation pathways. Ideally monitoring should be action oriented to support climate risk assessment and adaptation including informing robust decision making to multiple risks over the long term. Based on the experience of global observations programs and empirical research we outline- Challenges in developing effective monitoring and climate information systems to support adaptation. The types of observations of critical importance needed for sector planning to enhance food, water and energy security, and to improve early warning for disaster risk reduction Observations needed for ecosystem-based adaptation including the identification of thresholds, maintenance of biological diversity and land degradation The benefits and limits of linking regional model output to local observations including analogs and verification for adaptation planning To support these goals a robust systems of integrated observations are needed to characterize the uncertainty surrounding emergent risks including overcoming unrealistically precise information demands. While monitoring systems design and operation should be guided by the standards and requirements of management, those who provide information to the system (e.g. hydromet services) should also derive benefits. Drawing on identified information needs to support climate risk management (in drought, water resources and other areas) we outline principles of effective monitoring and develop preliminary strategic guidance for information systems being developed through the GEO, GCOS and Global and national frameworks for climate services. The efficacy of such services are improved by a problem-solving orientation, participatory planning, extension management and improvements in the use and value of existing data to legitimize new investments.

  7. Reducing audio stimulus presentation latencies across studies, laboratories, and hardware and operating system configurations.

    PubMed

    Babjack, Destiny L; Cernicky, Brandon; Sobotka, Andrew J; Basler, Lee; Struthers, Devon; Kisic, Richard; Barone, Kimberly; Zuccolotto, Anthony P

    2015-09-01

    Using differing computer platforms and audio output devices to deliver audio stimuli often introduces (1) substantial variability across labs and (2) variable time between the intended and actual sound delivery (the sound onset latency). Fast, accurate audio onset latencies are particularly important when audio stimuli need to be delivered precisely as part of studies that depend on accurate timing (e.g., electroencephalographic, event-related potential, or multimodal studies), or in multisite studies in which standardization and strict control over the computer platforms used is not feasible. This research describes the variability introduced by using differing configurations and introduces a novel approach to minimizing audio sound latency and variability. A stimulus presentation and latency assessment approach is presented using E-Prime and Chronos (a new multifunction, USB-based data presentation and collection device). The present approach reliably delivers audio stimuli with low latencies that vary by ≤1 ms, independent of hardware and Windows operating system (OS)/driver combinations. The Chronos audio subsystem adopts a buffering, aborting, querying, and remixing approach to the delivery of audio, to achieve a consistent 1-ms sound onset latency for single-sound delivery, and precise delivery of multiple sounds that achieves standard deviations of 1/10th of a millisecond without the use of advanced scripting. Chronos's sound onset latencies are small, reliable, and consistent across systems. Testing of standard audio delivery devices and configurations highlights the need for careful attention to consistency between labs, experiments, and multiple study sites in their hardware choices, OS selections, and adoption of audio delivery systems designed to sidestep the audio latency variability issue.

  8. Near-IR laser frequency standard stabilized using FM-spectroscopy

    NASA Astrophysics Data System (ADS)

    Ružička, Bohdan; Číp, Ondřej; Lazar, Josef

    2006-02-01

    At the present time fiber-optics and optical communication are in rapid progress. Modern technologies such as DWDM (Dense Wavelength Division Multiplex) need precise stability of laser frequencies. According to this fact, requirements of new etalons of optical frequencies in the telecommunication band is rapidly growing. Lasers working in near infrared telecommunication band (1500-1600 nm) can be stabilized to 12C IIH II or 13C IIH II (acetylene) gas absorption lines. The acetylene gas absorption has been widely studied and accepted by international bodies of standardization as a primary wavelength reference in the near infrared band around 1550nm. Our aim was to design and develop a compact fibre optics laser system generating coherent light in near-JR band with high frequency stability (at least 1.10 -8). This system should become a base for realization of a primary frequency standard for optical communications in the Czech Republic. Such an etalon will be needed for calibration of wavelength-meters and spectral analysers for DWDM communication systems. We are co-operating with CMI (Czech Metrology Institute) on this project. We present stabilized laser system based on a single frequency DFB (Distributed Feedback) laser diode with a narrow spectral profile. The laser is pre-stabilized by means of the FM-spectroscopy on a passive resonator. Thanks to a fast feed-back loop we are able to improve spectral characteristics of the laser. The laser frequency is locked by a relatively slow second feed-back loop on an absorption line of acetylene vapour which is sealed in a cell under the optimised pressure.

  9. An implicit boundary integral method for computing electric potential of macromolecules in solvent

    NASA Astrophysics Data System (ADS)

    Zhong, Yimin; Ren, Kui; Tsai, Richard

    2018-04-01

    A numerical method using implicit surface representations is proposed to solve the linearized Poisson-Boltzmann equation that arises in mathematical models for the electrostatics of molecules in solvent. The proposed method uses an implicit boundary integral formulation to derive a linear system defined on Cartesian nodes in a narrowband surrounding the closed surface that separates the molecule and the solvent. The needed implicit surface is constructed from the given atomic description of the molecules, by a sequence of standard level set algorithms. A fast multipole method is applied to accelerate the solution of the linear system. A few numerical studies involving some standard test cases are presented and compared to other existing results.

  10. The CUAHSI Water Data Center: Enabling Data Publication, Discovery and Re-use

    NASA Astrophysics Data System (ADS)

    Seul, M.; Pollak, J.

    2014-12-01

    The CUAHSI Water Data Center (WDC) supports a standards-based, services-oriented architecture for time-series data and provides a separate service to publish spatial data layers as shape files. Two new services that the WDC offers are a cloud-based server (Cloud HydroServer) for publishing data and a web-based client for data discovery. The Cloud HydroServer greatly simplifies data publication by eliminating the need for scientists to set up an SQL-server data base, a requirement that has proven to be a significant barrier, and ensures greater reliability and continuity of service. Uploaders have been developed to simplify the metadata documentation process. The web-based data client eliminates the need for installing a program to be used as a client and works across all computer operating systems. The services provided by the WDC is a foundation for big data use, re-use, and meta-analyses. Using data transmission standards enables far more effective data sharing and discovery; standards used by the WDC are part of a global set of standards that should enable scientists to access unprecedented amount of data to address larger-scale research questions than was previously possible. A central mission of the WDC is to ensure these services meet the needs of the water science community and are effective at advancing water science.

  11. IOOS Data Portals and Uniform On-line Browse Capabilities

    NASA Astrophysics Data System (ADS)

    Howard, M.; Currier, R. D.; Kobara, S.; Gayanilo, F.

    2015-12-01

    The Gulf of Mexico Coastal Ocean Observing System Regional Association (GCOOS-RA) is one of eleven Regional Associations organized under the NOAA-led U.S. Integrated Ocean Observing System (IOOS) Program Office. Each of the RAs operate standards-based regional data portals designed to aggregate near real-time and historical observed data and modeled outputs from distributed providers and to offer these and derived products in standardized ways to a diverse set of users. The RA's portals are based on the IOOS Data and Communications Plan which describes the functional elements needed for an interoperable system. One of these elements is called "Uniform On-line Browse" which is an informational service designed primarily to visualize the inventory of a portal. An on-line browse service supports the end user's need to discover what parameters are available, to learn the spatial and temporal extend of the holdings, and to examine the character of the data (e.g, variability, gappiness, etc). These pieces of information help the end user decide if the data are fit for his/her purpose and to construct valid data requests. Note that on-line browse is a distinctly different activity than data analysis because it seeks to yield knowledge about the inventory and not about what the data mean. "Uniform" on-line browse is a service that takes advantage of the standardization of the data portal's data access points. Most portals represent station locations on a map. This is a view of the data inventory but these plots are rarely generated by pulling data through the standards-based services offered to the end users but through methods only available to the portal programmers. This work will present results of Uniform On-line browse tools developed within GCOOS-RA and their applicability to other RA portals.

  12. Round table discussion " Development of qualification framework in meteorology (TEMPUS QUALIMET)"

    NASA Astrophysics Data System (ADS)

    Bashmakova, I.; Belotserkovsky, A.; Karlin, L.; Petrosyan, A.; Serditova, N.; Zilitinkevich, S.

    2010-09-01

    The international consortium has started implementing a project aimed at the development of unified framework of qualifications in meteorology (QualiMet), setting a system of recognition and award of qualifications up to Doctoral level based on standards of knowledge, skill and competence acquired by learners is underway. The QualiMet has the following specific objectives: 1. To develop standards of knowledge, skills and competence for all qualifications up to Doctoral level needed in all possible occupations meteorology learner can undertake, by July 2011 2. To develop reciprocally recognized rubrics, criteria, methods and tools for assessing the compliance with the developed standards (quality assurance), by July 2012 3. To set the network of Centers of Excellence as the primary designer of sample education programs and learning experiences, both in brick-and-mortar and distant setting of delivery, leading to achievement of the developed standards, by December 2012 4. To set a system of mutual international recognition and award of qualifications in meteorology based on the developed procedures and establishment of self-regulatory public organization, by December 2012 The main beneficiaries of the project are: 1. Meteorology learners from the consortium countries. They will be able to make informed decisions about available qualification choices and progression options and provided an opportunity for students and graduates to participate in the system of international continuous education. 2. Meteorology employers from the consortium countries, They will be able to specify the level of knowledge, skill and competence required for occupational roles, evaluate qualifications presented, connect training and development with business needs. 3. Students and academic staff of all the consortium members, who will gain the increased mobility and exchange the fluxes of culturally and institutionally diversified lecturers and qualified specialists

  13. Infant CPAP for low-income countries: An experimental comparison of standard bubble CPAP and the Pumani system.

    PubMed

    Falk, Markus; Donaldsson, Snorri; Drevhammar, Thomas

    2018-01-01

    Access to inexpensive respiratory support to newborn infants improves survival in low-income countries. Standard bubble continuous positive airway pressure (CPAP) has been extensively used worldwide for more than 30 years. One project aimed at providing affordable CPAP is the Pumani system developed by Rice 360°. Compared to standard bubble CPAP the system has an unconventional design. The aim was to compare the Pumani system with two traditional bubble CPAP systems, focusing on in-vitro performance and safety. The Pumani system was compared to traditional bubble CPAP from Fisher & Paykel (Auckland, New Zealand) and Diamedica (Devon, United Kingdom). The systems were tested using static flow resistance and simulated breathing for a range of fresh gas flows and submersion levels. There were large differences between the Pumani CPAP and the conventional bubble CPAP systems. The Pumani system was not pressure stable, had high resistance and high imposed work of breathing. It was not possible to use submersion depth to adjust CPAP without accounting for fresh gas flow. The Pumani design is novel and not similar to any previously described CPAP system. The main mechanism for CPAP generation was resistance, not submersion depth. The system should therefore not be referred to as bubble CPAP. The clinical consequences of its pressure instability and high imposed work of breathing are not known and trials on outcome and safety are needed.

  14. AXAF FITS standard for ray trace interchange

    NASA Astrophysics Data System (ADS)

    Hsieh, Paul F.

    1993-07-01

    A standard data format for the archival and transport of x-ray events generated by ray trace models is described. Upon review and acceptance by the Advanced X-ray Astrophysics Facility (AXAF) Software Systems Working Group (SSWG), this standard shall become the official AXAF data format for ray trace events. The Flexible Image Transport System (FITS) is well suited for the purposes of the standard and was selected to be the basis of the standard. FITS is both flexible and efficient and is also widely used within the astronomical community for storage and transfer of data. In addition, software to read and write FITS format files are widely available. In selecting quantities to be included within the ray trace standard, the AXAF Mission Support team, Science Instruments team, and the other contractor teams were surveyed. From the results of this survey, the following requirements were established: (1) for the scientific needs, each photon should have associated with it: position, direction, energy, and statistical weight; the standard must also accommodate path length (relative phase), and polarization. (2) a unique photon identifier is necessary for bookkeeping purposes; (3) a log of individuals, organizations, and software packages that have modified the data must be maintained in order to create an audit trail; (4) a mechanism for extensions to the basic kernel should be provided; and (5) the ray trace standard should integrate with future AXAF data product standards.

  15. AXAF FITS standard for ray trace interchange

    NASA Technical Reports Server (NTRS)

    Hsieh, Paul F.

    1993-01-01

    A standard data format for the archival and transport of x-ray events generated by ray trace models is described. Upon review and acceptance by the Advanced X-ray Astrophysics Facility (AXAF) Software Systems Working Group (SSWG), this standard shall become the official AXAF data format for ray trace events. The Flexible Image Transport System (FITS) is well suited for the purposes of the standard and was selected to be the basis of the standard. FITS is both flexible and efficient and is also widely used within the astronomical community for storage and transfer of data. In addition, software to read and write FITS format files are widely available. In selecting quantities to be included within the ray trace standard, the AXAF Mission Support team, Science Instruments team, and the other contractor teams were surveyed. From the results of this survey, the following requirements were established: (1) for the scientific needs, each photon should have associated with it: position, direction, energy, and statistical weight; the standard must also accommodate path length (relative phase), and polarization. (2) a unique photon identifier is necessary for bookkeeping purposes; (3) a log of individuals, organizations, and software packages that have modified the data must be maintained in order to create an audit trail; (4) a mechanism for extensions to the basic kernel should be provided; and (5) the ray trace standard should integrate with future AXAF data product standards.

  16. Leveraging standards to support patient-centric interdisciplinary plans of care.

    PubMed

    Dykes, Patricia C; DaDamio, Rebecca R; Goldsmith, Denise; Kim, Hyeon-eui; Ohashi, Kumiko; Saba, Virginia K

    2011-01-01

    As health care systems and providers move towards meaningful use of electronic health records, the once distant vision of collaborative patient-centric, interdisciplinary plans of care, generated and updated across organizations and levels of care, may soon become a reality. Effective care planning is included in the proposed Stages 2-3 Meaningful Use quality measures. To facilitate interoperability, standardization of plan of care messaging, content, information and terminology models are needed. This degree of standardization requires local and national coordination. The purpose of this paper is to review some existing standards that may be leveraged to support development of interdisciplinary patient-centric plans of care. Standards are then applied to a use case to demonstrate one method for achieving patient-centric and interoperable interdisciplinary plan of care documentation. Our pilot work suggests that existing standards provide a foundation for adoption and implementation of patient-centric plans of care that are consistent with federal requirements.

  17. Regulating small things: genes, gametes and nanotechnology.

    PubMed

    Bennett, Belinda

    2007-08-01

    Biotechnology and nanotechnology both intersect with other technologies in ways that open new possibilities for further technological progress. The potential for increased convergence between technological fields highlights the need for regulatory frameworks to be integrated, flexible and responsive. Within a federal legal system such as Australia's, there is a need to ensure that we adopt a coordinated national approach to the crafting of regulatory solutions. In addition, there is a need for global cooperation in the development of international standards and regulatory harmonisation. Finally, this article considers the role that law plays in negotiating risk in relation to new technologies.

  18. Needs assessment under the Maternal and Child Health Services Block Grant: Massachusetts.

    PubMed

    Guyer, B; Schor, L; Messenger, K P; Prenney, B; Evans, F

    1984-09-01

    The Massachusetts maternal and child health (MCH) agency has developed a needs assessment process which includes four components: a statistical measure of need based on indirect, proxy health and social indicators; clinical standards for services to be provided; an advisory process which guides decision making and involves constituency groups; and a management system for implementing funds distribution, namely open competitive bidding in response to a Request for Proposals. In Fiscal Years 1982 and 1983, the process was applied statewide in the distribution of primary prenatal (MIC) and pediatric (C&Y) care services and lead poisoning prevention projects. Both processes resulted in clearer definitions of services to be provided under contract to the state as well as redistribution of funds to serve localities that had previously received no resources. Although the needs assessment process does not provide a direct measure of unmet need in a complex system of private and public services, it can be used to advocate for increased MCH funding and guide the distribution of new MCH service dollars.

  19. Made in China: Challenge and Innovation in China's Vocational Education and Training System. International Comparative Study of Leading Vocational Education Systems

    ERIC Educational Resources Information Center

    Stewart, Vivien

    2015-01-01

    China has the largest population and largest labor force in the world. It has been highly successful in rapidly expanding both secondary and higher education to a significant fraction of the youth cohort. However, educational opportunities and standards across China are highly uneven. China has abundant labor power, but it will need a far more…

  20. Local, regional and national interoperability in hospital-level systems architecture.

    PubMed

    Mykkänen, J; Korpela, M; Ripatti, S; Rannanheimo, J; Sorri, J

    2007-01-01

    Interoperability of applications in health care is faced with various needs by patients, health professionals, organizations and policy makers. A combination of existing and new applications is a necessity. Hospitals are in a position to drive many integration solutions, but need approaches which combine local, regional and national requirements and initiatives with open standards to support flexible processes and applications on a local hospital level. We discuss systems architecture of hospitals in relation to various processes and applications, and highlight current challenges and prospects using a service-oriented architecture approach. We also illustrate these aspects with examples from Finnish hospitals. A set of main services and elements of service-oriented architectures for health care facilities are identified, with medium-term focus which acknowledges existing systems as a core part of service-oriented solutions. The services and elements are grouped according to functional and interoperability cohesion. A transition towards service-oriented architecture in health care must acknowledge existing health information systems and promote the specification of central processes and software services locally and across organizations. Software industry best practices such as SOA must be combined with health care knowledge to respond to central challenges such as continuous change in health care. A service-oriented approach cannot entirely rely on common standards and frameworks but it must be locally adapted and complemented.

  1. Evaluation of low-cost commercial-off-the-shelf autopilot systems for SUAS operations

    NASA Astrophysics Data System (ADS)

    Brown, Calvin Thomas

    With this increase in unmanned aircraft system (UAS) operations, there is a need for a structured process to evaluate different commercially available systems, particularly autopilots. The Remotely Operated Aircraft Management, Interpretation, and Navigation from Ground or ROAMING scale was developed to meet this need. This scale is a modification of the widely accepted Handling Qualities Rating scale developed by George Cooper and Robert Harper Jr. The Cooper-Harper scale allows pilots to rate a vehicle's performance in completing some task. Similarly, the ROAMING scale allows UAS operators to evaluate the management and observability of UAS in completing some task. The standardized evaluative process consists of cost, size, weight, and power (SWAP) analysis, ease of implementation through procedural description of setup, ROAMING scale rating, a slightly modified NASA TLX rating, and comparison of manual operation to autonomous operation of the task. This standard for evaluation of autopilots and their software will lead to better understanding of the workload placed on UAS operators and indicate where improvements to design and operational procedures can be made. An assortment of low-cost commercial-off-the-shelf (COTS) autopilots were selected for use in the development of the evaluation and results of these tests demonstrate the commonalities and differences in these systems.

  2. A Universal Intelligent System-on-Chip Based Sensor Interface

    PubMed Central

    Mattoli, Virgilio; Mondini, Alessio; Mazzolai, Barbara; Ferri, Gabriele; Dario, Paolo

    2010-01-01

    The need for real-time/reliable/low-maintenance distributed monitoring systems, e.g., wireless sensor networks, has been becoming more and more evident in many applications in the environmental, agro-alimentary, medical, and industrial fields. The growing interest in technologies related to sensors is an important indicator of these new needs. The design and the realization of complex and/or distributed monitoring systems is often difficult due to the multitude of different electronic interfaces presented by the sensors available on the market. To address these issues the authors propose the concept of a Universal Intelligent Sensor Interface (UISI), a new low-cost system based on a single commercial chip able to convert a generic transducer into an intelligent sensor with multiple standardized interfaces. The device presented offers a flexible analog and/or digital front-end, able to interface different transducer typologies (such as conditioned, unconditioned, resistive, current output, capacitive and digital transducers). The device also provides enhanced processing and storage capabilities, as well as a configurable multi-standard output interface (including plug-and-play interface based on IEEE 1451.3). In this work the general concept of UISI and the design of reconfigurable hardware are presented, together with experimental test results validating the proposed device. PMID:22163624

  3. Fundamentals of robotic surgery: a course of basic robotic surgery skills based upon a 14-society consensus template of outcomes measures and curriculum development.

    PubMed

    Smith, Roger; Patel, Vipul; Satava, Richard

    2014-09-01

    There is a need for a standardized curriculum for training and assessment of robotic surgeons to proficiency, followed by high-stakes testing (HST) for certification. To standardize the curriculum and certification of robotic surgeons, a series of consensus conferences attended by 14 leading international surgical societies have been used to compile the outcomes measures and curriculum that should form the basis for a Fundamentals of Robotic Surgery (FRS) programme. A set of 25 outcomes measures and a curriculum for teaching the skills needed to safely use current generation surgical robotic systems has been developed and accepted by a committee of experienced robotic surgeons across 14 specialties. A standardized process for certifying the skills of a robotic surgeon has begun to emerge. The work described here documents both the processes used for developing educational material and the educational content of a robotic curriculum. Copyright © 2013 John Wiley & Sons, Ltd.

  4. Promoting Good Clinical Laboratory Practices and Laboratory Accreditation to Support Clinical Trials in Sub-Saharan Africa

    PubMed Central

    Shott, Joseph P.; Saye, Renion; Diakité, Moussa L.; Sanogo, Sintry; Dembele, Moussa B.; Keita, Sekouba; Nagel, Mary C.; Ellis, Ruth D.; Aebig, Joan A.; Diallo, Dapa A.; Doumbo, Ogobara K.

    2012-01-01

    Laboratory capacity in the developing world frequently lacks quality management systems (QMS) such as good clinical laboratory practices, proper safety precautions, and adequate facilities; impacting the ability to conduct biomedical research where it is needed most. As the regulatory climate changes globally, higher quality laboratory support is needed to protect study volunteers and to accurately assess biological parameters. The University of Bamako and its partners have undertaken a comprehensive QMS plan to improve quality and productivity using the Clinical and Laboratory Standards Institute standards and guidelines. The clinical laboratory passed the College of American Pathologists inspection in April 2010, and received full accreditation in June 2010. Our efforts to implement high-quality standards have been valuable for evaluating safety and immunogenicity of malaria vaccine candidates in Mali. Other disease-specific research groups in resource-limited settings may benefit by incorporating similar training initiatives, QMS methods, and continual improvement practices to ensure best practices. PMID:22492138

  5. Towards establishing compact imaging spectrometer standards

    USGS Publications Warehouse

    Slonecker, E. Terrence; Allen, David W.; Resmini, Ronald G.

    2016-01-01

    Remote sensing science is currently undergoing a tremendous expansion in the area of hyperspectral imaging (HSI) technology. Spurred largely by the explosive growth of Unmanned Aerial Vehicles (UAV), sometimes called Unmanned Aircraft Systems (UAS), or drones, HSI capabilities that once required access to one of only a handful of very specialized and expensive sensor systems are now miniaturized and widely available commercially. Small compact imaging spectrometers (CIS) now on the market offer a number of hyperspectral imaging capabilities in terms of spectral range and sampling. The potential uses of HSI/CIS on UAVs/UASs seem limitless. However, the rapid expansion of unmanned aircraft and small hyperspectral sensor capabilities has created a number of questions related to technological, legal, and operational capabilities. Lightweight sensor systems suitable for UAV platforms are being advertised in the trade literature at an ever-expanding rate with no standardization of system performance specifications or terms of reference. To address this issue, both the U.S. Geological Survey and the National Institute of Standards and Technology are eveloping draft standards to meet these issues. This paper presents the outline of a combined USGS/NIST cooperative strategy to develop and test a characterization methodology to meet the needs of a new and expanding UAV/CIS/HSI user community.

  6. STRS Compliant FPGA Waveform Development

    NASA Technical Reports Server (NTRS)

    Nappier, Jennifer; Downey, Joseph

    2008-01-01

    The Space Telecommunications Radio System (STRS) Architecture Standard describes a standard for NASA space software defined radios (SDRs). It provides a common framework that can be used to develop and operate a space SDR in a reconfigurable and reprogrammable manner. One goal of the STRS Architecture is to promote waveform reuse among multiple software defined radios. Many space domain waveforms are designed to run in the special signal processing (SSP) hardware. However, the STRS Architecture is currently incomplete in defining a standard for designing waveforms in the SSP hardware. Therefore, the STRS Architecture needs to be extended to encompass waveform development in the SSP hardware. A transmit waveform for space applications was developed to determine ways to extend the STRS Architecture to a field programmable gate array (FPGA). These extensions include a standard hardware abstraction layer for FPGAs and a standard interface between waveform functions running inside a FPGA. Current standards were researched and new standard interfaces were proposed. The implementation of the proposed standard interfaces on a laboratory breadboard SDR will be presented.

  7. Inclusion in Jamaican Primary Schools: Teachers' Self-Efficacy, Attitudes, and Concerns

    ERIC Educational Resources Information Center

    Samms, Jillian Samantha

    2017-01-01

    Inclusive education has become an international phenomenon; however, many developing countries struggle with its implementation. At last assessment of the Jamaican educational system in 2004, findings revealed exclusionary practices which are in contrast to international standards on education. Many children with special needs may not be receiving…

  8. Up Front: Students Are Chafing under "Test Stress."

    ERIC Educational Resources Information Center

    American School Board Journal, 2001

    2001-01-01

    Although President Bush favors continuous testing, headlines reflect an intense, growing antitesting sentiment. One standard does not fit all, current systems are malfunctioning, and kids are short-changed. A recent report says abstinence-only sex education is ineffective; high teen birth rates underline the need for comprehensive approaches. (MLH)

  9. GUIDANCE FOR THE PERFORMANCE EVALUATION OF THREE-DIMENSIONAL AIR QUALITY MODELING SYSTEMS FOR PARTICULATE MATTER AND VISIBILITY

    EPA Science Inventory

    The National Ambient Air Quality Standards for particulate matter (PM) and the federal regional haze regulations place some emphasis on the assessment of fine particle (PM; 5) concentrations. Current air quality models need to be improved and evaluated against observations to a...

  10. 76 FR 7187 - Priorities for Addressing Risks to the Reliability of the Bulk-Power System; Reliability...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-09

    ... emerging challenges facing the power grid? b. Do the CIP standards assure cyber security, including... Smart Grid applications have non-cyber reliability implications that need to be addressed? d. What steps... (NERC). Ronald L. Litzinger, President, Southern California Edison Company. Stephen J. Wright...

  11. Designing and Validating Assessments of Complex Thinking in Science

    ERIC Educational Resources Information Center

    Ryoo, Kihyun; Linn, Marcia C.

    2015-01-01

    Typical assessment systems often measure isolated ideas rather than the coherent understanding valued in current science classrooms. Such assessments may motivate students to memorize, rather than to use new ideas to solve complex problems. To meet the requirements of the Next Generation Science Standards, instruction needs to emphasize sustained…

  12. Contradicting Mainstream Reform Rhetoric: Interview with Richard P. McAdams.

    ERIC Educational Resources Information Center

    English, Fenwick W.

    1993-01-01

    Compared to Germany, Japan, and Denmark, U.S. fails its students by neglecting basic health and welfare needs, permitting inequitable school funding system, and perpetuating cultural ethos that undermines serious academic achievement. Teachers are not to blame. Factors influencing underachievement are low parent expectations and standards, local…

  13. 75 FR 65251 - Proposed Amendment of Class E Airspace; Charleston, WV

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-22

    ...; Airspace Docket No. 10-AEA-24) and be submitted in triplicate to the Docket Management System (see... action proposes to modify Class E Airspace at Charleston, WV, to accommodate the additional airspace needed for the holding pattern associated with the new Standard Instrument Approach Procedures (SIAPs...

  14. 75 FR 57216 - Proposed Establishment of Class E Airspace; Bamberg, SC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-20

    ... submitted in triplicate to the Docket Management System (see ADDRESSES section for address and phone number... action proposes to establish Class E Airspace at Bamberg, SC, to accommodate the additional airspace needed for the Standard Instrument Approach Procedures (SIAPs) developed for Bamberg County Airport. This...

  15. 75 FR 57215 - Proposed Establishment of Class E Airspace; Crewe, VA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-20

    ... submitted in triplicate to the Docket Management System (see ADDRESSES section for address and phone number... action proposes to establish Class E Airspace at Crewe, VA, to accommodate the additional airspace needed for the Standard Instrument Approach Procedures (SIAPs) developed for Crewe Municipal Airport. This...

  16. 75 FR 28765 - Amendment of Class E Airspace; Pine Mountain, GA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-24

    ... triplicate to the Docket Management System (see ADDRESSES section for address and phone number). You may also... proposes to amend Class E Airspace at Pine Mountain, GA, to accommodate the additional airspace needed for the Standard Instrument Approach Procedures (SIAPs) developed for Harris County Airport. This action...

  17. 40 CFR 30.22 - Payment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Financial and Program Management § 30.22 Payment. (a... systems that meet the standards for fund control and accountability as established in § 30.21. Cash advances to a recipient organization shall be limited to the minimum amounts needed and be timed to be in...

  18. 40 CFR 30.22 - Payment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Financial and Program Management § 30.22 Payment. (a... systems that meet the standards for fund control and accountability as established in § 30.21. Cash advances to a recipient organization shall be limited to the minimum amounts needed and be timed to be in...

  19. Developmement of second-generation Environmentally Superior Technology for treatment of swine manure in the USA

    USDA-ARS?s Scientific Manuscript database

    New swine waste management systems in North Carolina need to meet high performance standards of an environmentally superior technology (EST) regarding nitrogen, phosphorus, heavy metals, pathogens, ammonia and odor emissions, and remain affordable and simple to operate. The objective of this study w...

  20. 77 FR 40864 - Privacy Act of 1974; System of Records

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-11

    ... standard reporting, ad-hoc reporting and tracking capability of procurement, funding, contractor and user..., guards, and is accessible only to authorized personnel. Access to records is limited to person(s... cleared for need-to-know. Access to computerized data is restricted by Common Access Card (CAC) and/or...

  1. Court Rules - Alaska Court System

    Science.gov Websites

    Association Child in Need of Aid Civil Procedure Code of Judicial Conduct Criminal Procedure Delinquency the rules' standards for issuing summons and warrants. Proposed Changes to the CINA/Delinquency Rules Amending CINA Rule 2, adding new CINA Rule 3.1 - Consolidation in sibling CINA cases. New Delinquency Rule

  2. Subject Classification.

    ERIC Educational Resources Information Center

    Thompson, Gayle; And Others

    Three newspaper librarians described how they manage the files of newspaper clippings which are a necessary part of their collections. The development of a new subject classification system for the clippings files was outlined. The new subject headings were based on standard subject heading lists and on local need. It was decided to use a computer…

  3. 14 CFR 23.181 - Dynamic stability.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Dynamic stability. 23.181 Section 23.181... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Flight Stability § 23.181 Dynamic... that the function of a stability augmentation system, reference § 23.672, is needed to meet the flight...

  4. NHEXAS PHASE I MARYLAND STUDY--STANDARD OPERATING PROCEDURE FOR TRAINING OF PHLEBOTOMISTS (G10)

    EPA Science Inventory

    The purpose of this SOP is to outline the responsibilities of the phlebotomist before, during, and after sampling at residences; and the training system that teaches phlebotomists what they need to know to handle these responsibilities. The overall responsibilities are to collec...

  5. Mindfulness Meditation as an Adjunct Approach to Treatment within the Correctional System

    ERIC Educational Resources Information Center

    Dafoe, Terra; Stermac, Lana

    2013-01-01

    Cognitive-behavioral therapy and relapse prevention represent the correctional gold standard in treatment, while the principles of risk, need, and responsivity are widely recognized as essential for reducing recidivism. Addressing responsivity has become difficult as the number of inmates with mental health diagnoses continues to rise,…

  6. 75 FR 4310 - Credit Reforms in Organized Wholesale Electric Markets

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-27

    ... electricity markets typically use bilateral contracts such as the Western Systems Power Pool (WSPP) standard... scanned image format. Commenters filing electronically do not need to make a paper filing. Commenters that..., Secretary. In consideration of the foregoing, the Commission proposes to amend part 35, Chapter J, Title 18...

  7. Assessment Challenges for Business Education in Changing Times

    ERIC Educational Resources Information Center

    Hazari, Sunil; Gaytan, Jorge; North, Alexa

    2008-01-01

    In addition to the difficult task of identifying teaching methods that ensure student learning, the American educational system is facing significant challenges. Schools are struggling to maintain standards for high-quality teaching while trying to address the learning needs of students with Limited English Proficiency (LEP). The same struggle is…

  8. Reviewing and reforming policy in health enterprise information security

    NASA Astrophysics Data System (ADS)

    Sostrom, Kristen; Collmann, Jeff R.

    2001-08-01

    Health information management policies usually address the use of paper records with little or no mention of electronic health records. Information Technology (IT) policies often ignore the health care business needs and operational use of the information stored in its systems. Representatives from the Telemedicine & Advanced Technology Research Center, TRICARE and Offices of the Surgeon General of each Military Service, collectively referred to as the Policies, Procedures and Practices Work Group (P3WG), examined military policies and regulations relating to computer-based information systems and medical records management. Using a system of templates and matrices created for the purpose, P3WG identified gaps and discrepancies in DoD and service compliance with the proposed Health Insurance Portability and Accountability Act (HIPAA) Security Standard. P3WG represents an unprecedented attempt to coordinate policy review and revision across all military health services and the Office of Health Affairs. This method of policy reform can identify where changes need to be made to integrate health management policy and IT policy in to an organizational policy that will enable compliance with HIPAA standards. The process models how large enterprises may coordinate policy revision and reform across broad organizational and work domains.

  9. A flexible system for vital signs monitoring in hospital general care wards based on the integration of UNIX-based workstations, standard networks and portable vital signs monitors.

    PubMed Central

    Welch, J. P.; Sims, N.; Ford-Carlton, P.; Moon, J. B.; West, K.; Honore, G.; Colquitt, N.

    1991-01-01

    The article describes a study conducted on general surgical and thoracic surgical floors of a 1000-bed hospital to assess the impact of a new network for portable patient care devices. This network was developed to address the needs of hospital patients who need constant, multi-parameter, vital signs surveillance, but do not require intensive nursing care. Bedside wall jacks were linked to UNIX-based workstations using standard digital network hardware, creating a flexible system (for general care floors of the hospital) that allowed the number of monitored locations to increase and decrease as patient census and acuity levels varied. It also allowed the general care floors to provide immediate, centralized vital signs monitoring for patients who unexpectedly became unstable, and permitted portable monitors to travel with patients as they were transferred between hospital departments. A disk-based log within the workstation automatically collected performance data, including patient demographics, monitor alarms, and network status for analysis. The log has allowed the developers to evaluate the use and performance of the system. PMID:1807720

  10. Fish welfare assurance system: initial steps to set up an effective tool to safeguard and monitor farmed fish welfare at a company level.

    PubMed

    van de Vis, J W; Poelman, M; Lambooij, E; Bégout, M-L; Pilarczyk, M

    2012-02-01

    The objective was to take a first step in the development of a process-oriented quality assurance (QA) system for monitoring and safeguarding of fish welfare at a company level. A process-oriented approach is focused on preventing hazards and involves establishment of critical steps in a process that requires careful control. The seven principles of the Hazard Analysis Critical Control Points (HACCP) concept were used as a framework to establish the QA system. HACCP is an internationally agreed approach for management of food safety, which was adapted for the purpose of safeguarding and monitoring the welfare of farmed fish. As the main focus of this QA system is farmed fish welfare assurance at a company level, it was named Fish Welfare Assurance System (FWAS). In this paper we present the initial steps of setting up FWAS for on growing of sea bass (Dicentrarchus labrax), carp (Cyprinus carpio) and European eel (Anguilla anguilla). Four major hazards were selected, which were fish species dependent. Critical Control Points (CCPs) that need to be controlled to minimize or avoid the four hazards are presented. For FWAS, monitoring of CCPs at a farm level is essential. For monitoring purposes, Operational Welfare Indicators (OWIs) are needed to establish whether critical biotic, abiotic, managerial and environmental factors are controlled. For the OWIs we present critical limits/target values. A critical limit is the maximum or minimum value to which a factor must be controlled at a critical control point to prevent, eliminate or reduce a hazard to an acceptable level. For managerial factors target levels are more appropriate than critical limits. Regarding the international trade of farmed fish products, we propose that FWAS needs to be standardized in aquaculture chains. For this standardization a consensus on the concept of fish welfare, methods to assess welfare objectively and knowledge on the needs of farmed fish are required.

  11. Architectural approaches for HL7-based health information systems implementation.

    PubMed

    López, D M; Blobel, B

    2010-01-01

    Information systems integration is hard, especially when semantic and business process interoperability requirements need to be met. To succeed, a unified methodology, approaching different aspects of systems architecture such as business, information, computational, engineering and technology viewpoints, has to be considered. The paper contributes with an analysis and demonstration on how the HL7 standard set can support health information systems integration. Based on the Health Information Systems Development Framework (HIS-DF), common architectural models for HIS integration are analyzed. The framework is a standard-based, consistent, comprehensive, customizable, scalable methodology that supports the design of semantically interoperable health information systems and components. Three main architectural models for system integration are analyzed: the point to point interface, the messages server and the mediator models. Point to point interface and messages server models are completely supported by traditional HL7 version 2 and version 3 messaging. The HL7 v3 standard specification, combined with service-oriented, model-driven approaches provided by HIS-DF, makes the mediator model possible. The different integration scenarios are illustrated by describing a proof-of-concept implementation of an integrated public health surveillance system based on Enterprise Java Beans technology. Selecting the appropriate integration architecture is a fundamental issue of any software development project. HIS-DF provides a unique methodological approach guiding the development of healthcare integration projects. The mediator model - offered by the HIS-DF and supported in HL7 v3 artifacts - is the more promising one promoting the development of open, reusable, flexible, semantically interoperable, platform-independent, service-oriented and standard-based health information systems.

  12. Do We Reap What We Sow? Exploring the Association between the Strength of European Primary Healthcare Systems and Inequity in Unmet Need

    PubMed Central

    Hanssens, Lise; Vyncke, Veerle; De Maeseneer, Jan; Willems, Sara

    2017-01-01

    Access to healthcare is inequitably distributed across different socioeconomic groups. Several vulnerable groups experience barriers in accessing healthcare, compared to their more wealthier counterparts. In response to this, many countries use resources to strengthen their primary care (PC) system, because in many European countries PC is the first entry-point to the healthcare system and plays a central role in the coordination of patients through the healthcare system. However it is unclear whether this strengthening of PC leads to less inequity in access to the whole healthcare system. This study investigates the association between strength indicators of PC and inequity in unmet need by merging data from the European Union Statistics on Income and Living Conditions database (2013) and the Primary Healthcare Activity Monitor for Europe (2010). The analyses reveal a significant association between the Gini coefficient for income inequality and inequity in unmet need. When the Gini coefficient of a country is one SD higher, the social inequity in unmet need in that particular country will be 4.960 higher. Furthermore, the accessibility and the workforce development of a country’s PC system is inverse associated with the social inequity of unmet need. More specifically, when the access- and workforce development indicator of a country PC system are one standard deviation higher, the inequity in unmet healthcare needs are respectively 2.200 and 4.951 lower. Therefore, policymakers should focus on reducing income inequality to tackle inequity in access, and strengthen PC (by increasing accessibility and better-developing its workforce) as this can influence inequity in unmet need. PMID:28046051

  13. Building America Case Study: Zero Energy Ready Home and the Challenge of Hot Water on Demand, Denver, Colorado

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    "This report outlines the steps a developer can use when looking to create and implement higher performance standards such as the U.S. Department of Energy (DOE) Zero Energy Ready Home (ZERH) standards in a community. The report also describes the specific examples of how this process was followed by a developer, Forest City, in the Stapleton community in Denver, Colorado. IBACOS described the steps used to begin to bring the DOE ZERH standard to the Forest City Stapleton community based on 15 years of community-scale development work done by IBACOS. As a result of this prior IBACOS work, the teammore » gained an understanding of the various components that a master developer needs to consider and created strategies for incorporating those components in the initial phases of development to achieve higher performance buildings in the community. An automated scoring system can be used to perform an internal audit that provides a detailed and consistent evaluation of how several homes under construction or builders' floor plans compare with the requirements of the DOE Zero Energy Ready Home program. This audit can be performed multiple times at specific milestones during construction to allow the builder to make changes as needed throughout construction for the project to meet Zero Energy Ready Home standards. This scoring system also can be used to analyze a builder's current construction practices and design.« less

  14. Structured light imaging system for structural and optical characterization of 3D tissue-simulating phantoms

    NASA Astrophysics Data System (ADS)

    Liu, Songde; Smith, Zach; Xu, Ronald X.

    2016-10-01

    There is a pressing need for a phantom standard to calibrate medical optical devices. However, 3D printing of tissue-simulating phantom standard is challenged by lacking of appropriate methods to characterize and reproduce surface topography and optical properties accurately. We have developed a structured light imaging system to characterize surface topography and optical properties (absorption coefficient and reduced scattering coefficient) of 3D tissue-simulating phantoms. The system consisted of a hyperspectral light source, a digital light projector (DLP), a CMOS camera, two polarizers, a rotational stage, a translation stage, a motion controller, and a personal computer. Tissue-simulating phantoms with different structural and optical properties were characterized by the proposed imaging system and validated by a standard integrating sphere system. The experimental results showed that the proposed system was able to achieve pixel-level optical properties with a percentage error of less than 11% for absorption coefficient and less than 7% for reduced scattering coefficient for phantoms without surface curvature. In the meanwhile, 3D topographic profile of the phantom can be effectively reconstructed with an accuracy of less than 1% deviation error. Our study demonstrated that the proposed structured light imaging system has the potential to characterize structural profile and optical properties of 3D tissue-simulating phantoms.

  15. Restructuring an undergraduate dental curriculum to global standards--a case study in an Indian dental school.

    PubMed

    Kadagad, P; Tekian, A; Pinto, P X; Jirge, V L

    2012-05-01

    Globalisation has affected all aspects of life and dentistry is no exception. In the context of today's dentist being a global citizen, undergraduate training in dentistry is set to ensure converging standards so that international recognition of dental qualifications can move forward. The decision of the Dental Council of India to expand the undergraduate dental program to five years provides an opportunity to be part of the endeavor of the Global Dental Congress to achieve converging standards which was initially for the European Union, and now spreading out globally. Economic emergence in Indian subcontinent has resulted in growing oral health care needs both in quality and quantity. To address this issue, the graduating dentist needs to be trained following a competency based curricular model. Access to Internet facilitated the goal of achieving converging standards of dental schools to be feasible because of the instant communication and capacity to share information about training strategies via technology across the globe. Upgrading the undergraduate training to global standards by dental schools in India could be a wise and strategic move both for attracting students to study in India, as well as retaining the graduates after their training. The following is a case study of an Indian dental school set to restructure the undergraduate curriculum to global standards using the 8 steps of Kotter's transformational change. Change in curriculum and the subsequent accreditation of the school in global platform not only attracts prospective students but also results in producing competent dentists. Dental education provided by the institution can result in quality assurance, benchmarking the assessment system to achieve international recognition. This paper highlights the need and importance of facilitation of international convergence with long term aspirations for mutual recognition of international degrees. © 2011 John Wiley & Sons A/S.

  16. Inadequate Contract Oversight of Military Construction Projects in Afghanistan Resulted in Increased Hazards to Life and Safety of Coalition Forces

    DTIC Science & Technology

    2013-03-08

    applicable fire protection standards for two of the three projects we reviewed that required a fire sprinkler system . Specifically, the Secure...RSOI and Command and Control facilities do not have fire sprinkler systems as required by Unified Facilities Criteria 3-600-01, Section 4-2.2...stated that, as such, those facilities did not need fire sprinkler systems . Based on the justification provided by the Air Force on the DD Form 1391s

  17. A model for a knowledge-based system's life cycle

    NASA Technical Reports Server (NTRS)

    Kiss, Peter A.

    1990-01-01

    The American Institute of Aeronautics and Astronautics has initiated a Committee on Standards for Artificial Intelligence. Presented here are the initial efforts of one of the working groups of that committee. The purpose here is to present a candidate model for the development life cycle of Knowledge Based Systems (KBS). The intent is for the model to be used by the Aerospace Community and eventually be evolved into a standard. The model is rooted in the evolutionary model, borrows from the spiral model, and is embedded in the standard Waterfall model for software development. Its intent is to satisfy the development of both stand-alone and embedded KBSs. The phases of the life cycle are detailed as are and the review points that constitute the key milestones throughout the development process. The applicability and strengths of the model are discussed along with areas needing further development and refinement by the aerospace community.

  18. [Oral and maxillofacial surgery residency training in the United States: what can we learn].

    PubMed

    Ren, Y F

    2017-04-09

    China is currently in the process of establishing formal residency training programs in oral and maxillofacial surgery and other medical and dental specialties. Regulatory agencies, and educational and academic institutions in China are exploring mechanisms, goals and standards of residency training that meet the needs of the Chinese healthcare system. This article provides an introduction of residency training in oral and maxillofacial surgery in the United States, with emphasis on the accreditation standard by the Commission on Dental Accreditation. As there are fundamental differences in the medical and dental education systems between China and United States, the training standards in the United States may not be entirely applicable in China. A competency-based training model that focus on overall competencies in medical knowledge, clinical skills and values at the time of graduation should be taken into consideration in a Chinese residency training program in oral and maxillofacial surgery.

  19. Building a human rights framework for workers' compensation in the United States: opening the debate on first principles.

    PubMed

    Hilgert, Jeffrey A

    2012-06-01

    This article introduces the idea of human rights to the topic of workers' compensation in the United States. It discusses what constitutes a human rights approach and explains how this approach conflicts with those policy ideas that have provided the foundation historically for workers' compensation in the United States. Using legal and historical research, key international labor and human rights standards on employment injury benefits and influential writings in the development of the U.S. workers' compensation system are cited. Workers' injury and illness compensation in the United States does not conform to basic international human rights norms. A comprehensive review of the U.S. workers' compensation system under international human rights standards is needed. Examples of policy changes are highlighted that would begin the process of moving workers' compensation into conformity with human rights standards. Copyright © 2012 Wiley Periodicals, Inc.

  20. Detection of Plasmodium Aldolase Using a Smartphone and Microfluidic Enzyme Linked Immunosorbent Assay

    PubMed Central

    2017-01-01

    Background Malaria control efforts are limited in rural areas. A low-cost system to monitor response without the use of electricity is needed. Plasmodium aldolase is a malaria biomarker measured using enzyme linked immunosorbent assay (ELISA) techniques. A three-part system using ELISA was developed consisting of a microfluidic chip, hand crank centrifuge, and a smartphone. Methods A circular microfluidic chip was fabricated using clear acrylic and a CO2 laser. A series of passive valves released reagents at precise times based upon centrifugal force. Color change was measured via smartphone camera using an application programmed in Java. The microchip was compared to a standard 96-well sandwich ELISA. Results Results from standard ELISA were compared to microchip at varying concentrations (1–10 ng/mL). Over 15 different microfluidic patterns were tested, and a final prototype of the chip was created. The prototype microchip was compared to standard sandwich ELISA (n = 20) using samples of recombinant aldolase. Color readings of standard ELISA and microfluidic microchip showed similar results. Conclusion A low-cost microfluidic system could detect and follow therapeutic outcomes in rural areas and identify resistant strains. PMID:29057138

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top