DOE Office of Scientific and Technical Information (OSTI.GOV)

Dentz, Jordan; Alaigh, Kunal

Two multifamily buildings planned in Climate Zone 4 were analyzed to determine the cost, energy and performance implications of redesigning them to comply with Zero Energy Ready Home, a recognition program of the U.S. Department of Energy. Energy modeling was conducted on one representative apartment in each building using BEopt. Construction costs were obtained from the developer and subcontractors to determine savings and cost increases over ENERGY STAR. It was found that seven items would be necessary to change to comply with ZERH criteria when starting from the original design which was compliant with ENERGY STAR version 3.0. Design changesmore » were made to the exterior walls, domestic water heating system, duct protection, duct design, garage ventilation, and pest control to comply with ZERH requirements. Energy impacts of upgrading from the original design to ZERH resulted in 2 to 8% reduction in modeled source energy consumption, or 1.7 to 10.4 MMBtu per year, although the original design was already about 8% better than a design configured to minimum ENERGY STAR criteria. According to the BEopt analysis, annualized energy related costs of the ZERH design were slightly higher for the apartment and slightly lower for the townhome when compared to the original design.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Two multifamily buildings planned in Climate Zone 4 were analyzed to determine the cost, energy and performance implications of redesigning them to comply with Zero Energy Ready Home, a recognition program of the U.S. Department of Energy. Energy modeling was conducted on one representative apartment in each building using BEopt. Construction costs were obtained from the developer and subcontractors to determine savings and cost increases over ENERGY STAR. It was found that seven items would be necessary to change to comply with ZERH criteria when starting from the original design which was compliant with ENERGY STAR version 3.0. Design changesmore » were made to the exterior walls, domestic water heating system, duct protection, duct design, garage ventilation, and pest control to comply with ZERH requirements. Energy impacts of upgrading from the original design to ZERH resulted in 2 to 8 percent reduction in modeled source energy consumption, or 1.7 to 10.4 MMBtu per year, although the original design was already about 8 percent better than a design configured to minimum ENERGY STAR criteria. According to the BEopt analysis, annualized energy related costs of the ZERH design were slightly higher for the apartment and slightly lower for the townhome when compared to the original design.« less

The Microcomputer Revolution.

ERIC Educational Resources Information Center

Fosdick, Howard

1980-01-01

Examines the development of the microcomputer and focuses on its potential for library automation. The characteristics of microcomputers and minicomputers are contrasted and a selected annotated bibliography includes a list of specialty magazines on microcomputers. (RAA)

Microcomputers in Geography.

ERIC Educational Resources Information Center

Snaden, James N.; And Others

Geographers in the United States rely heavily on microcomputers. They employ microcomputers to enhance three general categories of tasks: word processing and other productivity needs, geographic instruction, and discipline-specific applications. Word processing and desktop publishing continue to be the primary uses of microcomputers by…

Applications of Microcomputers in Patient Care

PubMed Central

Eden, Henry S.

1979-01-01

This paper serves as an introduction to two sessions on microcomputer applications in patient care. It describes several advantages offered by microcomputers in the design of medical devices--flexibility, reliability, smallness, and low power consumption. It concludes by discussing eight categories of microcomputer application.

Microcomputer Applications in Agriculture.

ERIC Educational Resources Information Center

Hilgenberg, Gene; And Others

This curriculum guide is intended to assist persons teaching a course in microcomputer applications in agriculture. (These applications are designed to be used on Apple IIe or TRS-80 microcomputers.) Addressed in the individual units of instruction are the following topics: microcomputer operating procedures; procedures for evaluating and…

On Selecting a Microcomputer for 1800 Freshmen at Drexel.

ERIC Educational Resources Information Center

Smith, Allan L.; And Others

1984-01-01

Presents report to Vice President for Academic Affairs of Drexel University which formed the basis for negotiating an agreement with Apple Corporation to provide required microcomputers for incoming freshmen. Microcomputer Selection Committee constitution and charge, student ownership goals, requirements and specifications for the microcomputers,…

Refinery spreadsheet highlights microcomputer process applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tucker, M.A.

1984-01-23

Microcomputer applications in the process areas at Chevron U.S.A. refineries and at the Chevron Research Co. illustrate how the microcomputer has changed the way we do our jobs. This article will describe major uses of the microcomputer as a personal work tool in Chevron process areas. It will also describe how and why many of Chevron's microcomputer applications were developed and their characteristics. One of our earliest microcomputer applications, developed in late 1981, was an electronic spreadsheet program using a small desktop microcomputer. It was designed to help a refinery planner prepare monthly plans for a small portion of onemore » of our major refineries. This particular microcomputer had a tiny 4-in. screen, and the reports were several strips of print-out from the microcomputer's 3-in.-wide internal printer taped together. In spite of these archaic computing conditions, it was a successful application. It automated what had been very tedious and time-consuming calculations with a pencil, a calculator, and a great deal of erasing. It eliminated filling out large ''horseblanket'' reports. The electronic spreadsheet was also flexible; the planner could easily change the worksheet to match new operating constraints, new process conditions, and new feeds and products. Fortunately, within just a few months, this application graduated to a similar electronic spreadsheet program on a new, more powerful microcomputer. It had a bigger display screen and a letter-size printer. The same application is still in use today, although it has been greatly enhanced and altered to match extensive plant modifications. And there are plans to expand it again onto yet another, more powerful microcomputer.« less

Tools for Scientific Thinking: Microcomputer-Based Laboratories for the Naive Science Learner.

ERIC Educational Resources Information Center

Thornton, Ronald K.

A promising new development in science education is the use of microcomputer-based laboratory tools that allow for student-directed data acquisition, display, and analysis. Microcomputer-based laboratories (MBL) make use of inexpensive microcomputer-connected probes to measure such physical quantities as temperature, position, and various…

The Power of the New Microcomputers: Challenge and Opportunity.

ERIC Educational Resources Information Center

Rumsey, Eric

1990-01-01

Describes current developments in microcomputer technology, including CD-ROM, the 80386 microprocessor, and the graphic user interface. It is argued that, as the information handling capacity of microcomputers increases, the microcomputer industry will increasingly market information to end users, and the library will be challenged to provide the…

Installing a Microcomputer Lab in a Medium-Sized Academic Library.

ERIC Educational Resources Information Center

Hallman, Clark N.; And Others

Designed to serve as a blueprint for other libraries developing plans for microcomputer facilities, this report describes the planning and implementation of a microcomputer laboratory at South Dakota State University's Hilton M. Briggs Library. The university's plan for installing microcomputer labs on campus and the initial planning process…

TLC for Growing Minds. Microcomputer Projects. Elementary Intermediate Microcomputer Projects.

ERIC Educational Resources Information Center

Buxton, Marilyn

Designed to improve students' thinking, learning, and creative skills while they learn to program a microcomputer in BASIC programing language, this book for intermediate learners at the elementary school level provides a variety of microcomputer activities designed to extend the concepts learned in accompanying instructional manuals (Volumes 3…

On-board Attitude Determination System (OADS). [for advanced spacecraft missions

NASA Technical Reports Server (NTRS)

Carney, P.; Milillo, M.; Tate, V.; Wilson, J.; Yong, K.

1978-01-01

The requirements, capabilities and system design for an on-board attitude determination system (OADS) to be flown on advanced spacecraft missions were determined. Based upon the OADS requirements and system performance evaluation, a preliminary on-board attitude determination system is proposed. The proposed OADS system consists of one NASA Standard IRU (DRIRU-2) as the primary attitude determination sensor, two improved NASA Standard star tracker (SST) for periodic update of attitude information, a GPS receiver to provide on-board space vehicle position and velocity vector information, and a multiple microcomputer system for data processing and attitude determination functions. The functional block diagram of the proposed OADS system is shown. The computational requirements are evaluated based upon this proposed OADS system.

NLM microcomputer-based tutorials (for microcomputers). Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perkins, M.

1990-04-01

The package consists of TOXLEARN--a microcomputer-based training package for TOXLINE (Toxicology Information Online), CHEMLEARN-a microcomputer-based training package for CHEMLINE (Chemical Information Online), MEDTUTOR--a microcomputer-based training package for MEDLINE (Medical Information Online), and ELHILL LEARN--a microcomputer-based training package for the ELHILL search and retrieval software that supports the above-mentioned databases...Software Description: The programs were developed under PILOTplus using the NLM LEARN Programmer. They run on IBM-PC, XT, AT, PS/2, and fully compatible computers. The programs require 512K RAM memory, one disk drive, and DOS 2.0 or higher. The software supports most monochrome, color graphics, enhanced color graphics, or visual graphics displays.

Exceptional Children and Microcomputers, A Survey of Public School Applications.

ERIC Educational Resources Information Center

Crowner, T. Timothy

Telephone interviews on the use of microcomputers in special education were administered to personnel in 25 districts (drawn from a random sample of the largest school districts in the United States) on the following topics: coordination of microcomputers; numbers of microcomputers owned and used; pragmatic uses; funding; brands used; selection,…

Fabricating a Microcomputer on a Single Silicon Wafer

NASA Technical Reports Server (NTRS)

Evanchuk, V. L.

1983-01-01

Concept for "microcomputer on a slice" reduces microcomputer costs by eliminating scribing, wiring, and packaging of individual circuit chips. Low-cost microcomputer on silicon slice contains redundant components. All components-central processing unit, input/output circuitry, read-only memory, and random-access memory (CPU, I/O, ROM, and RAM) on placed on single silicon wafer.

TLC for Growing Minds. Microcomputer Projects. Adult Intermediate Microcomputer Projects.

ERIC Educational Resources Information Center

Taitt, Henry A.

Designed to improve students' thinking, learning, and creative skills while they learn to program a microcomputer in BASIC programing language, this book for intermediate learners at the high school/adult level provides a variety of microcomputer activities designed to extend the concepts taught in the accompanying instructional manuals (Volumes 3…

Microcomputers in American Public Schools: A National Survey.

ERIC Educational Resources Information Center

Ingersoll, Gary M.; And Others

1983-01-01

In the 1981-82 school year, microcomputers were located in one-third of United States schools. The dominant share for school-based microcomputers was held by Apple Computer followed by Tandy-Radio Shack and Commodore, but this was regionally related. The majority of teachers polled possess positive attitudes toward classroom use of microcomputers.…

A Low Cost Microcomputer Laboratory for Investigating Computer Architecture.

ERIC Educational Resources Information Center

Mitchell, Eugene E., Ed.

1980-01-01

Described is a microcomputer laboratory at the United States Military Academy at West Point, New York, which provides easy access to non-volatile memory and a single input/output file system for 16 microcomputer laboratory positions. A microcomputer network that has a centralized data base is implemented using the concepts of computer network…

Audit Report on "The Department's Management of the ENERGY STAR Program"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2009-10-01

The American Recovery and Reinvestment Act (Recovery Act) authorized about $300 million in consumer rebate incentives for purchases of products rated under the 'ENERGY STAR' Program. ENERGY STAR, a voluntary labeling program established in 1992, provides consumers with energy efficiency data for a range of products so that they can make informed purchase judgments. The overall goal of the program is to encourage consumers to choose energy efficient products, advancing the nationwide goal of reducing energy consumption. The U.S. Environmental Protection Agency (EPA) managed the ENERGY STAR Program on a stand-alone basis until 1996 when it joined forces with themore » Department of Energy (Department). A Memorandum of Cooperation expanded the ENERGY STAR product categories, giving the Department responsibility for overseeing eight product categories such as windows, dishwashers, clothes washers, and refrigerators, while EPA retained responsibility for electronic product categories and heating, ventilating, and cooling equipment. Each agency is responsible for setting product efficiency specifications for those items under its control and for ensuring the proper use of the ENERGY STAR label in the marketplace. In August 2007, the EPA Office of Inspector General issued an audit report identifying significant control weaknesses in EPA's management of ENERGY STAR. The Department, concerned by the findings at EPA and eager to improve its own program, developed an approach to verify adherence to product specifications, ensure proper use of the ENERGY STAR label in the marketplace, and improve the establishment of product specifications. As evidenced by the commitment of $300 million in Recovery Act funds, the ENERGY STAR Program plays an important role in the U.S. efforts to reduce energy consumption. We initiated this audit to determine whether the Department had implemented the actions it announced in 2007 to strengthen the Program. The Department had not implemented planned improvements in the ENERGY STAR Program. Our audit revealed that officials had not: (1) Developed a formal quality assurance program to help ensure that product specifications were adhered to; (2) Effectively monitored the use of the ENERGY STAR label to ensure that only qualifying products were labeled as compliant; and (3) Formalized procedures for establishing and revising product specifications and for documenting decisions regarding those specifications. In our judgment, the delay in the Department's planned improvements in its management of the ENERGY STAR Program could reduce consumer confidence in the integrity of the ENERGY STAR label. Such loss of credibility could reduce energy savings, increase consumer risk, and diminish the value of the recent infusion of $300 million for ENERGY STAR rebates under the Recovery Act.« less

Satellite Doppler data processing using a microcomputer

NASA Technical Reports Server (NTRS)

Schmid, P. E.; Lynn, J. J.

1977-01-01

A microcomputer which was developed to compute ground radio beacon position locations using satellite measurements of Doppler frequency shift is described. Both the computational algorithms and the microcomputer hardware incorporating these algorithms were discussed. Results are presented where the microcomputer in conjunction with the NIMBUS-6 random access measurement system provides real time calculation of beacon latitude and longitude.

School Uses of Microcomputers: Reports from a National Survey. Issue No. 5.

ERIC Educational Resources Information Center

Johns Hopkins Univ., Baltimore, MD. Center for Social Organization of Schools.

School location of microcomputers and its impact on use were examined using data from the National Survey of School Uses of Microcomputers. An analysis of the responses from 1,082 (68% of the sample) microcomputer-using, public and non-public, elementary and secondary schools surveyed between December 1982 and March 1983, suggests that where…

User's guide to the LLL BASIC interpreter. [For 8080-based MCS-80 microcomputer system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allison, T.; Eckard, R.; Barber, J.

1977-06-09

Scientists are finding increased applications for microcomputers as process controllers in their experiments. However, while microcomputers are small and inexpensive, they are difficult to program in machine or assembly language. A high-level language is needed to enable scientists to develop their own microcomputer programs for their experiments on location. Recognizing this need, LLL contracted to have such a language developed. This report describes the result--the LLL BASIC interpreter, which operates with LLL's 8080-based MCS-80 microcomputer system. 4 tables.

Compliant cantilevered micromold

DOEpatents

Morales, Alfredo Martin [Pleasanton, CA; Domeier, Linda A [Danville, CA; Gonzales, Marcela G [Seattle, WA; Keifer, Patrick N [Livermore, CA; Garino, Terry Joseph [Albuquerque, NM

2006-08-15

A compliant cantilevered three-dimensional micromold is provided. The compliant cantilevered micromold is suitable for use in the replication of cantilevered microparts and greatly simplifies the replication of such cantilevered parts. The compliant cantilevered micromold may be used to fabricate microparts using casting or electroforming techniques. When the compliant micromold is used to fabricate electroformed cantilevered parts, the micromold will also comprise an electrically conducting base formed by a porous metal substrate that is embedded within the compliant cantilevered micromold. Methods for fabricating the compliant cantilevered micromold as well as methods of replicating cantilevered microparts using the compliant cantilevered micromold are also provided.

Method for providing a compliant cantilevered micromold

DOEpatents

Morales, Alfredo M.; Domeier, Linda A.; Gonzales, Marcela G.; Keifer, Patrick N.; Garino, Terry J.

2008-12-16

A compliant cantilevered three-dimensional micromold is provided. The compliant cantilevered micromold is suitable for use in the replication of cantilevered microparts and greatly simplifies the replication of such cantilevered parts. The compliant cantilevered micromold may be used to fabricate microparts using casting or electroforming techniques. When the compliant micromold is used to fabricate electroformed cantilevered parts, the micromold will also comprise an electrically conducting base formed by a porous metal substrate that is embedded within the compliant cantilevered micromold. Methods for fabricating the compliant cantilevered micromold as well as methods of replicating cantilevered microparts using the compliant cantilevered micromold are also provided.

Microcomputers in Florida Public Schools. Fall 1991. MIS Statistical Brief, Series 92-06B.

ERIC Educational Resources Information Center

Parks, Brenda; Bennett, Karen

This statistical brief on microcomputers in Florida public schools includes data on the following: (1) the number of instructional microcomputers from 1987-88 to 1991-92; (2) the number of instructional microcomputers for each school district from 1987-88 to 1991-92, including net change from 1990-91 to 1991-92; (3) percentages of instructional…

Microcomputers in Florida Public Schools. Fall 1990. MIS Statistical Brief, Series 91-07B.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Bureau of Program Support Services.

This summary of the use of microcomputers in Florida public schools during the 1990-91 school year indicates that the schools have reported a total of 131,367 microcomputers being used for student instruction, and 21,806 being used for administrative purposes. Four tables present data on the number of microcomputers in individual school districts…

Comparison of Apple, Epson, IBM, and Other Microcomputers for Applications in Rehabilitation Systems for Persons with Physical Handicaps. Revision D.

ERIC Educational Resources Information Center

Vanderheiden, Gregg C.

The paper analyzes major microcomputer systems and their use in rehabilitative systems for persons with physical handicaps. Four categories of microcomputers are addressed: systems designed for home or school with emphasis on low cost, recreation, and educational software; general purpose microcomputers with applications in a large number of…

A Method for Evaluation of Microcomputers for Tactical Applications.

DTIC Science & Technology

1980-06-01

application. The computational requirements of a tactical application are specified in terms of performance parameters. The presently marketed microcomputer...computational requirements of a tactical application are specified in terms of performance parameters. The presently marketed microcomputer and multi...also to provide a method to evaluate microcomputer systems for tactical applications, i.e., Command Control Communications (C 3), weapon systems, etc

A microcomputer network for control of a continuous mining machine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schiffbauer, W.H.

1993-12-31

This report details a microcomputer-based control and monitoring network that was developed in-house by the U.S. Bureau of Mines and installed on a continuous mining machine. The network consists of microcomputers that are connected together via a single twisted-pair cable. Each microcomputer was developed to provide a particular function in the control process. Machine-mounted microcomputers, in conjunction with the appropriate sensors, provide closed-loop control of the machine, navigation, and environmental monitoring. Off-the-machine microcomputers provide remote control of the machine, sensor status, and a connection to the network so that external computers can access network data and control the continuous miningmore » machine. Because of the network`s generic structure, it can be installed on most mining machines.« less

Automated Power Systems Management (APSM)

NASA Technical Reports Server (NTRS)

Bridgeforth, A. O.

1981-01-01

A breadboard power system incorporating autonomous functions of monitoring, fault detection and recovery, command and control was developed, tested and evaluated to demonstrate technology feasibility. Autonomous functions including switching of redundant power processing elements, individual load fault removal, and battery charge/discharge control were implemented by means of a distributed microcomputer system within the power subsystem. Three local microcomputers provide the monitoring, control and command function interfaces between the central power subsystem microcomputer and the power sources, power processing and power distribution elements. The central microcomputer is the interface between the local microcomputers and the spacecraft central computer or ground test equipment.

Personal Computers.

ERIC Educational Resources Information Center

Toong, Hoo-min D.; Gupta, Amar

1982-01-01

Describes the hardware, software, applications, and current proliferation of personal computers (microcomputers). Includes discussions of microprocessors, memory, output (including printers), application programs, the microcomputer industry, and major microcomputer manufacturers (Apple, Radio Shack, Commodore, and IBM). (JN)

Picking through Microcomputer Books.

ERIC Educational Resources Information Center

Lu, Cary

1984-01-01

Indicating that most microcomputer books aren't worth reading, offers several rules of thumb for selecting a microcomputer guide. Also provides a list of 13 noteworthy books, providing title, source, and current cost. (JN)

Microcomputers in Education: Uses for the '80s. Proceedings of the Annual Microcomputer Conference (2nd, Tempe, Arizona, January 15-16, 1982). Publication No. 3.

ERIC Educational Resources Information Center

Watson, Nancy Ralph, Ed.

The 30 conference papers in this collection are presented in 6 categories. Five overviews discuss innovative uses of computers in education (Dorothy K. Deringer); microcomputers in instructional research (Alan M. Lesgold); microcomputers in the schools (Mitchell Batoff, Gary G. Bitter); and the courseware crisis (Barbara R. Sadowski). Research and…

Choosing a Microcomputer: A Success Story.

ERIC Educational Resources Information Center

Mason, Robert M.

1983-01-01

Documentation of author's personal experience in the purchasing of a microcomputer discusses background learning, the purchase decision, needs assessment, computer literacy, general information on microcomputers, the situation assessment, and the final check. (EJS)

Attitude and subjective wellbeing of non-compliant mothers to childhood oral polio vaccine supplemental immunization in Northern Nigeria.

PubMed

Umeh, Gregory C; Nomhwange, Terna Ignatius; Shamang, Anthony F; Zakari, Furera; Musa, Audu I; Dogo, Paul M; Gugong, Victor; Iliyasu, Neyu

2018-02-08

Attitude and subjective well-being are important factors in mothers accepting or rejecting Oral Polio Vaccine (OPV) supplemental immunization. The purpose of the study was to determine the role of mothers' attitude and subjective wellbeing on non-compliance to OPV supplemental immunization in Northern Nigeria. The study utilized a cross-sectional design to assess attitude and subjective well-being of mothers using previously validated VACSATC (Vaccine Safety, Attitudes, Training and Communication-10 items) & SUBI (Subjective Well-being Inventory-40 items) measures. A total of 396 participants (equal number of non-compliant and compliant mothers) from 94 non-compliant settlements were interviewed, after informed consent. T-test was run to assess difference in mean scores between the non-compliant and compliant mothers on VACSATC and SUBI measures. The research showed a significant difference in mean scores between the non-compliant and compliant groups on VACSATC measure of mothers' attitude (M = 18.9 non-compliant, compared to 26.5 compliant; p < 0.05). On subjective well-being, the study showed there was no significant difference in the mean scores of the SUBI measure (M = 77.4 non-compliant, compared to 78.0 compliant; p > 0.05). The research has shown that negative attitude is more commonly present in non-compliant mothers and may be a factor in vaccine refusal in Northern Nigeria.

Microcomputer Software Development: New Strategies for a New Technology.

ERIC Educational Resources Information Center

Kehrberg, Kent T.

1979-01-01

Provides a guide for the development of educational computer programs for use on microcomputers. Making use of the features of microcomputers, including visual, audio, and tactile techniques, is encouraged. (Author/IRT)

Applications of microcomputers in bridge design.

DOT National Transportation Integrated Search

1986-01-01

The utilization of microcomputers in bridge design activities in state transportation departments was evaluated through contacts with 32 state agencies. While the present utilization of microcomputers was found to be limited, subsequent research show...

Library Computing

ERIC Educational Resources Information Center

Library Computing, 1985

1985-01-01

Special supplement to "Library Journal" and "School Library Journal" covers topics of interest to school, public, academic, and special libraries planning for automation: microcomputer use, readings in automation, online searching, databases of microcomputer software, public access to microcomputers, circulation, creating a…

Why Micros?

ERIC Educational Resources Information Center

Myers, Darlene

1983-01-01

Discusses development of the first computers; identifies five generations of computers; reviews projections for sales and proliferation of microcomputers into the marketplace; outlines procedures for selecting microcomputers and evaluating software; and reviews several articles on microcomputers centering on user requirements. (MBR)

Microcomputers and Literacy.

ERIC Educational Resources Information Center

Grice, R. D.

1986-01-01

The nature of literacy associated with the widely used new medium of microcomputers has not been fully exploited by schools to foster development of literacy programs. Microcomputer applications need integration with classroom activities where students construct language meaning. (19 references) (CJH)

Impact of Personal Computing on Education.

ERIC Educational Resources Information Center

McIsaac, Donald N.

1979-01-01

Describes microcomputers, outlines lessons learned from the evolution of other technologies as they apply to the development of the microcomputer, discusses computer literacy as a problem-solving tool, and speculates about microcomputer use in instruction and administration. (IRT)

[General-purpose microcomputer for medical laboratory instruments].

PubMed

Vil'ner, G A; Dudareva, I E; Kurochkin, V E; Opalev, A A; Polek, A M

1984-01-01

Presented in the paper is the microcomputer based on the KP580 microprocessor set. Debugging of the hardware and the software by using the unique debugging stand developed on the basis of microcomputer "Electronica-60" is discussed.

Circulation Systems on Microcomputers.

ERIC Educational Resources Information Center

Carlson, Gary

1984-01-01

Reports on the use of microcomputers in comprehensive library circulation systems. Topics covered include system requirements (reliability, completeness); determining circulation system needs (saving money, improving service, modernization); limitations of microcomputers (capacity, kinds of data stored, number of stations or terminals); system…

Microcomputer network for control of a continuous mining machine. Information circular/1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schiffbauer, W.H.

1993-01-01

The paper details a microcomputer-based control and monitoring network that was developed in-house by the U.S. Bureau of Mines, and installed on a Joy 14 continuous mining machine. The network consists of microcomputers that are connected together via a single twisted pair cable. Each microcomputer was developed to provide a particular function in the control process. Machine-mounted microcomputers in conjunction with the appropriate sensors provide closed-loop control of the machine, navigation, and environmental monitoring. Off-the-machine microcomputers provide remote control of the machine, sensor status, and a connection to the network so that external computers can access network data and controlmore » the continuous mining machine. Although the network was installed on a Joy 14 continuous mining machine, its use extends beyond it. Its generic structure lends itself to installation onto most mining machine types.« less

Modeling and performance assessment in QinetiQ of EO and IR airborne reconnaissance systems

NASA Astrophysics Data System (ADS)

Williams, John W.; Potter, Gary E.

2002-11-01

QinetiQ are the technical authority responsible for specifying the performance requirements for the procurement of airborne reconnaissance systems, on behalf of the UK MoD. They are also responsible for acceptance of delivered systems, overseeing and verifying the installed system performance as predicted and then assessed by the contractor. Measures of functional capability are central to these activities. The conduct of these activities utilises the broad technical insight and wide range of analysis tools and models available within QinetiQ. This paper focuses on the tools, methods and models that are applicable to systems based on EO and IR sensors. The tools, methods and models are described, and representative output for systems that QinetiQ has been responsible for is presented. The principle capability applicable to EO and IR airborne reconnaissance systems is the STAR (Simulation Tools for Airborne Reconnaissance) suite of models. STAR generates predictions of performance measures such as GRD (Ground Resolved Distance) and GIQE (General Image Quality) NIIRS (National Imagery Interpretation Rating Scales). It also generates images representing sensor output, using the scene generation software CAMEO-SIM and the imaging sensor model EMERALD. The simulated image 'quality' is fully correlated with the predicted non-imaging performance measures. STAR also generates image and table data that is compliant with STANAG 7023, which may be used to test ground station functionality.

Final report : evaluation of microcomputer applications in transportation engineering.

DOT National Transportation Integrated Search

1984-01-01

This study investigated areas where microcomputers can aid in the effectiveness of transportation engineering at state and local levels. A survey of the microcomputer needs of transportation professionals in state and local agencies in Virginia was c...

Microcomputer Database Management Systems for Bibliographic Data.

ERIC Educational Resources Information Center

Pollard, Richard

1986-01-01

Discusses criteria for evaluating microcomputer database management systems (DBMS) used for storage and retrieval of bibliographic data. Two popular types of microcomputer DBMS--file management systems and relational database management systems--are evaluated with respect to these criteria. (Author/MBR)

A study of the selection of microcomputer architectures to automate planetary spacecraft power systems

NASA Technical Reports Server (NTRS)

Nauda, A.

1982-01-01

Performance and reliability models of alternate microcomputer architectures as a methodology for optimizing system design were examined. A methodology for selecting an optimum microcomputer architecture for autonomous operation of planetary spacecraft power systems was developed. Various microcomputer system architectures are analyzed to determine their application to spacecraft power systems. It is suggested that no standardization formula or common set of guidelines exists which provides an optimum configuration for a given set of specifications.

Computer Series, 67: Bits and Pieces, 27.

ERIC Educational Resources Information Center

Moore, John W., Ed.

1986-01-01

Discusses a computer interfacing course using Commodore 64 microcomputers; a computer program for radioactive equilibrium; analysis of near infrared spectrum of hydrochloric acid molecules using Apple II microcomputers; microcomputer approach to conductivity titrations; balancing equations with Commodore 64's; formulation of mathematical…

The 4th R: Reasoning.

ERIC Educational Resources Information Center

Miles, Curtis

1983-01-01

Reviews sources of information on materials for teaching reasoning with a microcomputer. Suggests microcomputer magazines, catalogs of commercial materials, CONDUIT (a nonprofit organization devoted to educational computer use), and local microcomputer users groups. Lists Apple II software for strategy games with reasoning applications. (DMM)

Microcomputer Competencies for Vocational Teachers.

ERIC Educational Resources Information Center

Roth, Gene L.; Tesolowski, Dennis G.

1984-01-01

This joint research and development project of two state departments of education used the DACUM (Developing a Curriculum) process to identify microcomputer competencies for vocational instructors. Brainstorming techniques were used to identify five categories of microcomputer applications and to determine which competencies belonged in each…

Modeling with Microcomputers.

ERIC Educational Resources Information Center

Litaker, R. Gregory

The applications of a recently developed computer program for microcomputers in developing models in an institutional research environment are considered. The VISICALC program requires no user programming skills, is available for all major brands of microcomputers, and provides for easy exchange of information between users of different computing…

Measuring Thermoelectric Properties Automatically

NASA Technical Reports Server (NTRS)

Chmielewski, A.; Wood, C.

1986-01-01

Microcomputer-controlled system speeds up measurements of Hall voltage, Seebeck coefficient, and thermal diffusivity in semiconductor compounds for thermoelectric-generator applications. With microcomputer system, large data base of these parameters gathered over wide temperature range. Microcomputer increases measurement accuracy, improves operator productivity, and reduces test time.

Microcomputers, Evaluation, Literacy: Will the Teacher Survive?

ERIC Educational Resources Information Center

Hofmann, Richard J., Ed.

1982-01-01

The development of computer technology is considered, the concept of computer literacy is defined, and the role of teachers in educational microcomputer programs is discussed. The field of commercially produced software for microcomputers is reviewed. (For related articles, see EC 142 959-962.) (Author)

Implementing a Microcomputer Database Management System.

ERIC Educational Resources Information Center

Manock, John J.; Crater, K. Lynne

1985-01-01

Current issues in selecting, structuring, and implementing microcomputer database management systems in research administration offices are discussed, and their capabilities are illustrated with the system used by the University of North Carolina at Wilmington. Trends in microcomputer technology and their likely impact on research administration…

Single-chip microcomputer application in high-altitude balloon orientation system

NASA Technical Reports Server (NTRS)

Lim, T. S.; Ehrmann, C. H.; Allison, S. R.

1980-01-01

This paper describes the application of a single-chip microcomputer in a high-altitude balloon instrumentation system. The system, consisting of a magnetometer, a stepping motor, a microcomputer and a gray code shaft encoder, is used to provide an orientation reference to point a scientific instrument at an object in space. The single-chip microcomputer, Intel's 8748, consisting of a CPU, program memory, data memory and I/O ports, is used to control the orientation of the system.

Bi-directional communication interface for microprocessor-to-system/370

NASA Technical Reports Server (NTRS)

Fischer, J. P.

1981-01-01

The design and operation of a bi-directional communication interface between a microcomputer and the IBM System/370 is documented. The hardware unit interconnects a modem to interface to the S/370, the microcomputer with an EIA I/O port, and a terminal for sending and receiving data from either the microcomputer or the S/370. Also described is the software necessary for the two-way interface. This interface is designed so that no modifications need to be made to the terminal, modem, or microcomputer.

The Administrator's Use of Microcomputer Systems.

ERIC Educational Resources Information Center

Brown, Kenneth C.

1983-01-01

The use of microcomputers by college administrators to increase productivity is discussed. Microcomputers can help increase productivity in the following administrative office tasks: decision support, communication, personal assistance, and task management. One of the most promising developments to emerge from the decision sciences over the past…

Trend Analysis Using Microcomputers.

ERIC Educational Resources Information Center

Berger, Carl F.

A trend analysis statistical package and additional programs for the Apple microcomputer are presented. They illustrate strategies of data analysis suitable to the graphics and processing capabilities of the microcomputer. The programs analyze data sets using examples of: (1) analysis of variance with multiple linear regression; (2) exponential…

Using the Microcomputer to Develop Listening Skills.

ERIC Educational Resources Information Center

Mohler, Stephen C.

A college-level introductory Spanish instructional system uses an interactive combination of microcomputer and program-stop tape recorder to enhance students' listening skills. The basic content is listening drills, adapted to the computer medium. Microcomputer use adds considerable versatility to instructional materials, including such features…

Increasing Productivity with Microcomputers: Key to Improvement of Special Educattion in the 1980s.

ERIC Educational Resources Information Center

Brady, Richard C.; Dodge, Bernard J.

1982-01-01

Five microcomputer applications which may improve the management of teacher education programs are noted (database management, word processing, spread sheets, project scheduling and management, and test scoring), and six steps in introducing microcomputers into a department are discussed. (CL)

Microcomputers and Informatics Education at the University Level.

ERIC Educational Resources Information Center

Boyanov, Todor

1984-01-01

Because of the widespread use of microcomputers in Bulgaria, informatics education for all college students is considered both possible and necessary. Uses of microcomputers in various disciplines are described, including those in mathematics/mechanics, the experimental sciences, and humanities. Brief comments on computer-assisted-learning and…

Microcomputers: Software Evaluation. Evaluation Guides. Guide Number 17.

ERIC Educational Resources Information Center

Gray, Peter J.

This guide discusses three critical steps in selecting microcomputer software and hardware: setting the context, software evaluation, and managing microcomputer use. Specific topics addressed include: (1) conducting an informal task analysis to determine how the potential user's time is spent; (2) identifying tasks amenable to computerization and…

Microcomputers in Higher Education.

ERIC Educational Resources Information Center

McLean, Robert S., Ed.; McLean, Ruth W., Ed.

1981-01-01

Some of the areas in which Ontario educators currently employ microcomputers in higher education are addressed in several articles, bibliographies, and book reviews. Various uses of computer-managed instruction and computer-assisted instruction (CAI) at Humber College of Applied Arts and Technology are outlined by Frank A. Ford. Microcomputer CAI…

The Integration of Microcomputers into the Classroom or Now That I've Got It, What Do I Do with It?

ERIC Educational Resources Information Center

Keyser, Earl L.

1979-01-01

Provides a few examples of the use of the microcomputer in the classroom, emphasizing the advantages of the small machine. Notes the availability of tools to create instructional materials on the microcomputer. (Author/IRT)

Administrative Uses of Microcomputers.

ERIC Educational Resources Information Center

Crawford, Chase

1987-01-01

This paper examines the administrative uses of the microcomputer, stating that high performance educational managers are likely to have microcomputers in their organizations. Four situations that would justify the use of a computer are: (1) when massive amounts of data are processed through well-defined operations; (2) when data processing is…

The Microcomputer and Instruction in Geometry.

ERIC Educational Resources Information Center

Kantowski, Mary Grace

1981-01-01

The microcomputer has great potential for making high school geometry more stimulating and more easily understood by the students. The microcomputer can facilitate instruction in both the logico-deductive and spatial-visual aspects of geometry through graphics representations, simulation of motion, and its capability of interacting with the…

Structural analysis of the tongue and hyoid apparatus in a woodpecker

PubMed Central

Jung, Jae-Young; Naleway, Steven E.; Yaraghi, Nicholas A.; Herrera, Steven; Sherman, Vincent R.; Bushong, Eric A.; Ellisman, Mark H.; Kisailus, David; McKittrick, Joanna

2016-01-01

Woodpeckers avoid brain injury while they peck at trees up to 20 Hz with speeds up to 7 m/s, undergoing decelerations up to 1200 g. Along with the head, beak and neck, the hyoid apparatus (tongue bone and associated soft tissues) is subjected to these high impact forces. The shape of the hyoid apparatus is unusual in woodpeckers and its structure and mechanical properties have not been reported in detail. High-resolution X-ray micro-computed tomography and scanning electron microscopy with energy dispersive X-ray spectroscopy were performed and correlated with nanoindentation mapping. The hyoid apparatus has four distinct bone sections, with three joints between these sections. Nanoindentation results on cross-sectional regions of each bone reveal a previously unreported structure consisting of a stiff core and outer, more compliant shell with moduli of up to 27.4 GPa and 8.5 GPa, respectively. The bending resistance is low at the posterior section of the hyoid bones, indicating that this region has a high degree of flexibility to absorb impact. These new structural findings can be applied to further studies on the energy dissipation of the woodpecker during its drumming behavior, and may have implications for the design of engineered impact-absorbing structures. PMID:27000554

Microcomputers in the Learning Center: Guidelines for Avoiding Costly Mistakes.

ERIC Educational Resources Information Center

Belair, Charles

Guidelines for the planning and purchase of microcomputer systems are presented in outline form. These guidelines are directed to educators in developmental education, special education, and learning center environments; however, they are applicable to all educators intending to use microcomputers. First, a discussion of hardware considerations is…

Using Microcomputers in Teaching Vocational Agriculture.

ERIC Educational Resources Information Center

Barrick, R. Kirby, Ed.

This collection of articles is designed to help vocational agriculture teachers use microcomputers in teaching. The guide covers both the different types of software and the ways they can be applied in teaching. The guide is organized in three sections. The first section covers types of programs and includes "Selection of Microcomputer Hardware…

Research on Multimedia Access to Microcomputers for Visually Impaired Youth.

ERIC Educational Resources Information Center

Ashcroft, S. C.

This final report discusses the outcomes of a federally funded project that studied visual, auditory, and tactual methods designed to give youth with visual impairments access to microcomputers for curricular, prevocational, and avocational purposes. The objectives of the project were: (1) to research microcomputer systems that could be made…

Automating Relational Database Design for Microcomputer Users.

ERIC Educational Resources Information Center

Pu, Hao-Che

1991-01-01

Discusses issues involved in automating the relational database design process for microcomputer users and presents a prototype of a microcomputer-based system (RA, Relation Assistant) that is based on expert systems technology and helps avoid database maintenance problems. Relational database design is explained and the importance of easy input…

Microcomputers in Education. Report No. 4798.

ERIC Educational Resources Information Center

Feurzeig, W.; And Others

A brief review of the history of computer-assisted instruction and discussion of the current and potential roles of microcomputers in education introduce this review of the capabilities of state-of-the-art microcomputers and currently available software for them, and some speculations about future trends and developments. A survey of current…

The Use of Portable Microcomputers to Collect Student and Teacher Behavior Data.

ERIC Educational Resources Information Center

Rieth, Herbert; And Others

1989-01-01

Using portable microcomputers, three applications programs were developed and implemented to collect, store, transmit, and analyze teacher/student observational data. The three applications involved: analyzing teaching behaviors of trainees in field-site placements, using microcomputers to educate mildly handicapped high-school students, and using…

Microcomputer & Software Use in Michigan's Vocational-Technical Facilities: A Status Report.

ERIC Educational Resources Information Center

Harris, Richard

This report is intended to help Michigan's vocational and technical teachers and administrators make decisions regarding the purchase of microcomputer hardware and software for professional use. Addressed in a discussion of computer hardware are current and planned inventories of microcomputer hardware located in the public vocational and…

The Microcomputer Revolution.

ERIC Educational Resources Information Center

Kinne, Harold C.

The history of the development of the microcomputer industry since its inception in 1975 is explored in this brief paper, which pays special attention to the advent of the small business computer. The author describes the growth of sales, the development of successful companies, the early resistance to use of microcomputers in business, and the…

Microcomputer Application Priorities of College Faculty in Vocational-Technical Education.

ERIC Educational Resources Information Center

Cox, Kenneth; Cheek, Gerald

A literature review revealed that few colleges of education offering courses in microcomputer applications are addressing the training needs of college professors and graduate students aspiring to faculty positions. A study was therefore conducted to define and prioritize microcomputer applications needed by college faculty in vocational-technical…

The Use of Microcomputers in Distance Teaching Systems. ZIFF Papiere 70.

ERIC Educational Resources Information Center

Rumble, Greville

Microcomputers have revolutionized distance education in virtually every area. Used alone, personal computers provide students with a wide range of utilities, including word processing, graphics packages, and spreadsheets. When linked to a mainframe computer or connected to other personal computers in local area networks, microcomputers can…

Microcomputer Software Programs for Vocational Education.

ERIC Educational Resources Information Center

Rodenstein, Judith, Ed.; Lambert, Roger, Ed.

Over 200 microcomputer software packages applicable to vocational education are listed. Most of the programs are available for the Apple, TRS-80, and Commodore microcomputers. The packages have been reviewed, but have not been formally evaluated. Titles of the programs with names and addresses of the distributors are provided. Telephone numbers…

Tools of the Trade: Microcomputer-Based Instrumentation: As Easy As ADC.

ERIC Educational Resources Information Center

Lam, Tom

1983-01-01

Provides a brief introduction to using the microcomputer as a piece of laboratory equipment. Focuses on the range of hardware currently available to assist microcomputer-based-instrumentation (MBI), specifically the analog-to-digital converters. In addition, discusses specification of system performance, selection and integration of components,…

Using Microcomputers Interactively in Large Classrooms.

ERIC Educational Resources Information Center

Bowman, Barbara E.; Ellsworth, Randy

In 1980, Wichita State University received a grant to introduce microcomputers as interactive teaching tools in large science classrooms. Through this grant, 18 faculty in 11 departments developed software modules illustrating concepts that are often difficult to teach by usual lecture methods. To determine whether the use of microcomputers in…

Microcomputers in Education: A Self-Paced Orientation.

ERIC Educational Resources Information Center

Carey, Doris; Carey, Regan

Designed to serve as a self-paced computer course for education students with no experience using microcomputers, this manual contains instructions for operating an Apple IIe microcomputer, its introductory software, and Bank Street Writer, using the DOS 3.3 System Master. The lessons, which contain illustrations and sample screens, include…

MICROSPED Information Bulletin, Issues 1-10, 1984. Microcomputers in the Schools--Implementation in Special Education.

ERIC Educational Resources Information Center

Hanley, Tom V., Ed.; And Others

1984-01-01

Ten information bulletins on the implementation of microcomputers in special education are presented. Topics covered include the following: (1) implementation issues (including a description of a study assessing microcomputer applications in 12 local school districts' special education programs); (2) implementation strategies (which focuses on…

Word/Information Processing with Microcomputers in Business Education. Final Narrative Report for the Exemplary Project.

ERIC Educational Resources Information Center

Ascension Parish School Board, Donaldsonville, LA.

This demonstration introduced microcomputers into St. Amant High School in Louisiana by instituting a word/information processing program. Microcomputers, printers, and necessary software were purchased, and the manufacturer's educational representative instructed the word/information processing teacher on the operation of the equipment. The…

Microcomputer Usage in Schools, 1984-1985.

ERIC Educational Resources Information Center

Quality Education Data, Inc., Denver, CO.

Results are presented for the fourth annual survey of all U.S. school districts by Quality Educational Data, Inc. Findings are displayed in tabular form and include information on the following: market penetration by major brands of microcomputers in school districts and buildings; school districts that use microcomputers and the brand or…

Multiple-User Microcomputer Technology and Its Application to the Library Environment.

ERIC Educational Resources Information Center

McCarthy, Cathleen D.

1987-01-01

Demonstrates the ways in which multiuser and multitasking microcomputer systems can be used for the automation of small- to medium-sized library operations. The possibilities afforded by the IBM-PC AT microcomputer are discussed and a sample configuration with estimated cost projections is provided. (EM)

Microcomputers: Applications in Vocational Education.

ERIC Educational Resources Information Center

Rodenstein, Judith, Ed.; Lambert, Roger, Ed.

This handbook was assembled for vocational educators so that they can see the applications of microcomputers in both their instructional and administrative tasks. The 22 papers included in the handbook were written by educators who are and have been using microcomputers extensively in their work. The first section of the handbook discusses the…

Microcomputer Applications for Teaching Microeconomic Concepts: Some Old and New Approaches.

ERIC Educational Resources Information Center

Smith, L. Murphy; Smith, L. C., Jr.

1989-01-01

Presents microcomputer programs and programing techniques and demonstrates how these programs can be used by teachers to explain economics concepts and to help students make judgments. Each microcomputer application is supplemented by traditional graphic and mathematical analysis. Discusses applications dealing with supply, demand, elasticity,…

Information Resources on Microcomputers in Libraries: Public Services. A Selected ERIC Bibliography.

ERIC Educational Resources Information Center

ERIC Clearinghouse on Information Resources, Syracuse, NY.

Twelve articles published between 1982 and 1984 and cited in "Current Index to Journals in Education" are listed in this bibliography on public service applications of microcomputers in libraries. Topics include provision of free public access to microcomputers (justification, objectives, equipment specifications, uses and software,…

Microcomputer control of an electronically commutated dc motor

NASA Astrophysics Data System (ADS)

El-Sharkawi, M. A.; Coleman, J. S.; Mehdi, I. S.; Sommer, D. L.

A microcomputer control system for an electronically commutated dc motor (ECM) has been designed, built and tested. A 3-hp, 270-volt, samarium-cobalt brushless dc motor is controlled by an Intel 8086-based microcomputer. The main functions of the microcomputer are to control the speed of the motor, to provide forward or reverse rotation, to brake, and to protect the motor and its power electronic switching circuits from overcurrents. The necessary interface circuits were designed and built, and the system components have been integrated and tested. It is shown that the proposed ECM system with the microcomputer control operate the motor reliably over a wide range of speeds. The purpose of this effort is to develop the motorcontroller for driving electromechanical actuators for flight control and other aircraft applications.

Electronic field permeameter

DOEpatents

Chandler, Mark A.; Goggin, David J.; Horne, Patrick J.; Kocurek, Gary G.; Lake, Larry W.

1989-01-01

For making rapid, non-destructive permeability measurements in the field, a portable minipermeameter of the kind having a manually-operated gas injection tip is provided with a microcomputer system which operates a flow controller to precisely regulate gas flow rate to a test sample, and reads a pressure sensor which senses the pressure across the test sample. The microcomputer system automatically turns on the gas supply at the start of each measurement, senses when a steady-state is reached, collects and records pressure and flow rate data, and shuts off the gas supply immediately after the measurement is completed. Preferably temperature is also sensed to correct for changes in gas viscosity. The microcomputer system may also provide automatic zero-point adjustment, sensor calibration, over-range sensing, and may select controllers, sensors, and set-points for obtaining the most precise measurements. Electronic sensors may provide increased accuracy and precision. Preferably one microcomputer is used for sensing instrument control and data collection, and a second microcomputer is used which is dedicated to recording and processing the data, selecting the sensors and set-points for obtaining the most precise measurements, and instructing the user how to set-up and operate the minipermeameter. To provide mass data collection and user-friendly operation, the second microcomputer is preferably a lap-type portable microcomputer having a non-volatile or battery-backed CMOS memory.

Training faculty in Bangladesh to use a microcomputer for public health: followup report.

PubMed Central

Gould, J B; Frerichs, R R

1986-01-01

In 1984 the Western Consortium for the Health Professions, Inc., under contract to the United Nations Fund for Population Activities (UNFPA), began a project to assist Bangladesh's National Institute for Preventive and Social Medicine (NIPSOM) in establishing a microcomputing capability. The project's goal was to enable NIPSOM to become self-sufficient in the analysis by microcomputer of health, population, and family planning data; program evaluation; and policy activities. Lack of a local microcomputer infrastructure demanded that a local team of experts be developed to run the system described in a previous report. Five NIPSOM faculty members--three of whom had taken the workshop held when the system was first installed--were assigned to a computer committee, which was responsible for the computer's well-being. Six months after the microcomputer system was installed, a second 2-week workshop was given. The consortium's consultant facilitated the development of a basic microcomputer course, which was taught by four members of the computer committee to an additional eight NIPSOM faculty members. Emphasis was placed on developing local self-reliance and the need to overcome obstacles imposed by the lack of local hardware and software support systems. A strategy is proposed for the successful introduction of microcomputers in developing countries. PMID:3097742

MicroUse: The Database on Microcomputer Applications in Libraries and Information Centers.

ERIC Educational Resources Information Center

Chen, Ching-chih; Wang, Xiaochu

1984-01-01

Describes MicroUse, a microcomputer-based database on microcomputer applications in libraries and information centers which was developed using relational database manager dBASE II. The description includes its system configuration, software utilized, the in-house-developed dBASE programs, multifile structure, basic functions, MicroUse records,…

TLC for Growing Minds. Microcomputer Projects. Advanced Projects for Adults.

ERIC Educational Resources Information Center

Taitt, Henry A.

Designed to improve students' thinking, learning, and creative skills while they learn to program a microcomputer in BASIC programing language, this book for advanced learners at the high school/adult level provides a variety of microcomputer activities designed to extend the concepts learned in the accompanying instructional manuals (volumes 3…

Advanced Microcomputer Service Technician. Teacher Edition.

ERIC Educational Resources Information Center

Brown, A. O., III; Fulkerson, Dan, Ed.

This manual is the second of a three-text microcomputer service and repair series. This text addresses the training needs of "chip level" technicians who work with digital troubleshooting instruments to solve the complex microcomputer problems that are sent to them from computer stores that do not have full-service facilities. The manual contains…

TLC for Growing Minds. Microcomputer Projects. Junior High Projects for Volumes 3 & 4.

ERIC Educational Resources Information Center

Taitt, Henry A.

Designed to improve students' thinking, learning, and creative skills while they learn to program a microcomputer in BASIC programing language, this book for intermediate learners at the junior high level provides a variety of microcomputer activities designed to extend the concepts learned in the accompanying instructional manuals (Volumes 3 and…

Using the Analogue Input Port on the BBC Microcomputer: Some General Principles and a Specific Example.

ERIC Educational Resources Information Center

Millar, R. H.; Underwood, C. I.

1984-01-01

Discusses an easy way of interfacing physics experiments to a microcomputer, providing information on the "analog input port" of a BBC microcomputer. Also describes a capacitor discharge experiment with suggestions for several student activities such as investigating decay curve shapes. Program listing is available from author. (DH)

The Impact of Microcomputer-Based Science Labs on Children's Graphing Skills.

ERIC Educational Resources Information Center

Mokros, Janice R.

Microcomputer-based laboratories (MBL), the use of microcomputers for student-directed data acquisition and analysis, represents a promising new development in science laboratory instruction. This descriptive study determined the impact of MBLs on middle school students' understanding of graphs of distance and velocity. The study was based on the…

"Hack" Is Not A Dirty Word--The Tenth Anniversary of Patron Access Microcomputer Centers in Libraries.

ERIC Educational Resources Information Center

Dewey, Patrick R.

1986-01-01

The history of patron access microcomputers in libraries is described as carrying on a tradition that information and computer power should be shared. Questions that all types of libraries need to ask in planning microcomputer centers are considered and several model centers are described. (EM)

Automated System Market Place 1993. Part 2: Focus on Microcomputers.

ERIC Educational Resources Information Center

Bridge, Frank R.

1993-01-01

Presents 1992 sales of microcomputer systems by vendor. Customer support services, a new interchange format for MARC records, vendor market share and other statistics, foreign sales, and large and small systems are discussed. Profiles of 14 vendors, a chart of compatible system interfaces by vendor, and a directory of microcomputers sources are…

Microcomputers: Applications in Career Counseling and Career Education.

ERIC Educational Resources Information Center

Lambert, Roger, Ed.; Rodenstein, Judith, Ed.

This handbook was designed to help counselors and career development personnel to adopt and adapt to using microcomputers. The 18 papers included in the handbook were written by a cross section of career and counseling professionals as well as experts in microcomputer applications. In the first section of the handbook, the authors examine the…

Special Education Technologies for Young Children: Present and Future Learning Scenarios with Related Research Literature.

ERIC Educational Resources Information Center

Watson, J. Allen; And Others

1986-01-01

The article surveys computer usage with young handicapped children by developing three instructional scenarios (present actual, present possible, and future). Research is reviewed on computer use with very young children, cognitive theory and microcomputer learning, and social aspects of the microcomputer experience. Trends in microcomputer,…

Microcomputer Applications in Administration and Instruction. New Directions for Community Colleges, Number 47.

ERIC Educational Resources Information Center

Dellow, Donald A., Ed.; Poole, Lawrence H., Ed.

1984-01-01

The articles in this collection identify and discuss challenges facing community colleges as they attempt to implement the new microcomputer technology for instructional and administrative purposes. The collection includes: "The Microcomputer Revolution and Its Impact on Community Colleges," by Donald A. Dellow and Lawrence H. Poole;…

TLC for Growing Minds. Microcomputer Projects. Advanced Projects for Junior High.

ERIC Educational Resources Information Center

Taitt, Henry A.

Designed to improve students' thinking, learning, and creative skills while they learn to program a microcomputer in BASIC programing language, this book for advanced learners at the junior high level provides a variety of microcomputer activities designed to extend the concepts learned in the accompanying instructional manuals (volumes 5 and 6).…

A Survey on the Use of Microcomputers in Special Libraries.

ERIC Educational Resources Information Center

Krieger, Tillie

1986-01-01

Describes a survey on the use of microcomputers in special libraries. The discussion of the findings includes types of hardware and software in use; applications in public services, technical processes, and administrative tasks; data back-up techniques; training received; evaluation of software; and future plans for microcomputer applications. (1…

Using Microcomputers To Help Learning Disabled Student with Arithmetic Difficulties.

ERIC Educational Resources Information Center

Brevil, Margarette

The use of microcomputers to help the learning disabled increase their arithmetic skills is examined. The microcomputer should be used to aid the learning disabled student to practice the concepts taught by the teacher. Computer-aided instruction such as drill and practice may help the learning disabled student because it gives immediate feedback…

The Effects of Microcomputers on Children's Attention to Reading Tasks.

ERIC Educational Resources Information Center

Zuk, Dorie; Danner, Fred

A study investigated the effects of microcomputers on children's attention to reading tasks and the relationship between previous reading achievement and grade level on such attentional behavior. Fifty-five third and fifth graders read two stories each, one presented on a microcomputer and one presented in print. Television cartoons and rock music…

Microcomputers "Goto" School.

ERIC Educational Resources Information Center

Piele, Donald T.

This paper is a report of a pilot project in which a microcomputer was placed in a sixth grade classroom for eight weeks for the purpose of developing logical thinking skills. Students were first given instruction on how to program the APPLE II microcomputer to draw color graphics designs; they were then given similar problems to solve using the…

Microcomputer Applications in Secondary Health Occupations Education: State of the Art.

ERIC Educational Resources Information Center

Shelly, Richard W.

A study was undertaken to identify the different ways and the extent to which microcomputers are being used in secondary health occupations education (HOE) programs, the amount and types of applicable software and level of support for microcomputer-based HOE, and available literature reflecting or supporting the development of computer-assisted…

Microcomputers: Communication Software. Evaluation Guides. Guide Number 13.

ERIC Educational Resources Information Center

Gray, Peter J.

This guide discusses four types of microcomputer-based communication programs that could prove useful to evaluators: (1) the direct communication of information generated by one computer to another computer; (2) using the microcomputer as a terminal to a mainframe computer to input, direct the analysis of, and/or output data using a statistical…

A National Survey of Microcomputer Use by Academic Psychologists.

ERIC Educational Resources Information Center

Couch, James V.; Stoloff, Michael L.

1989-01-01

Reports the results of a national survey of academic psychologists relative to the use of microcomputers. Finds that there is an increase in the use of microcomputers for instructional purposes and that such use was unrelated to department size. Discusses the brands of computers most often used and the ways software is utilized. (KO)

Microcomputers in the Classroom: Don't Exclude the Developmentally Disabled.

ERIC Educational Resources Information Center

Schall, William E.; And Others

1985-01-01

This study tested the hypothesis that 15- to 21-year-old educable mentally retarded students could successfully interact with microcomputers and show interest in using them as a learning tool. High interest levels and attention spans and positive microcomputer attitudes displayed by subjects suggest there may be unrealized potential in…

PROLOG to the Future: A Glimpse of Things to Come in Artificial Intelligence.

ERIC Educational Resources Information Center

Herther, Nancy K.

1986-01-01

Briefly introduces the programming languages of artificial intelligence and presents information on some of the new versions of these languages available for microcomputers. A tutorial for PROLOG-86, a new microcomputer version of PROLOG, is given. Information on other microcomputer versions of these programs and a bibliography are included.…

Integrating Micro-computers with a Centralized DBMS: ORACLE, SEED AND INGRES

NASA Technical Reports Server (NTRS)

Hoerger, J.

1984-01-01

Users of ADABAS, a relational-like data base management system (ADABAS) with its data base programming language (NATURAL) are acquiring microcomputers with hopes of solving their individual word processing, office automation, decision support, and simple data processing problems. As processor speeds, memory sizes, and disk storage capacities increase, individual departments begin to maintain "their own" data base on "their own" micro-computer. This situation can adversely affect several of the primary goals set for implementing a centralized DBMS. In order to avoid this potential problem, these micro-computers must be integrated with the centralized DBMS. An easy to use and flexible means for transferring logic data base files between the central data base machine and micro-computers must be provided. Some of the problems encounted in an effort to accomplish this integration and possible solutions are discussed.

High resolution image processing on low-cost microcomputers

NASA Technical Reports Server (NTRS)

Miller, R. L.

1993-01-01

Recent advances in microcomputer technology have resulted in systems that rival the speed, storage, and display capabilities of traditionally larger machines. Low-cost microcomputers can provide a powerful environment for image processing. A new software program which offers sophisticated image display and analysis on IBM-based systems is presented. Designed specifically for a microcomputer, this program provides a wide-range of functions normally found only on dedicated graphics systems, and therefore can provide most students, universities and research groups with an affordable computer platform for processing digital images. The processing of AVHRR images within this environment is presented as an example.

Single-Chip Microcomputer Control Of The PWM Inverter

NASA Astrophysics Data System (ADS)

Morimoto, Masayuki; Sato, Shinji; Sumito, Kiyotaka; Oshitani, Katsumi

1987-10-01

A single-chip microcomputer-based con-troller for a pulsewidth modulated 1.7 KVA inverter of an airconditioner is presented. The PWM pattern generation and the system control of the airconditioner are achieved by software of the 8-bit single-chip micro-computer. The single-chip microcomputer has the disadvantages of low processing speed and small memory capacity which can be overcome by the magnetic flux control method. The PWM pattern is generated every 90 psec. The memory capacity of the PWM look-up table is less than 2 kbytes. The simple and reliable control is realized by the software-based implementation.

Preliminary description of the area navigation software for a microcomputer-based Loran-C receiver

NASA Technical Reports Server (NTRS)

Oguri, F.

1983-01-01

The development of new software implementation of this software on a microcomputer (MOS 6502) to provide high quality navigation information is described. This software development provides Area/Route Navigation (RNAV) information from Time Differences (TDs) in raw form using an elliptical Earth model and a spherical model. The software is prepared for the microcomputer based Loran-C receiver. To compute navigation infomation, a (MOS 6502) microcomputer and a mathematical chip (AM 9511A) were combined with the Loran-C receiver. Final data reveals that this software does indeed provide accurate information with reasonable execution times.

JSC Metal Finishing Waste Minimization Methods

NASA Technical Reports Server (NTRS)

Sullivan, Erica

2003-01-01

THe paper discusses the following: Johnson Space Center (JSC) has achieved VPP Star status and is ISO 9001 compliant. The Structural Engineering Division in the Engineering Directorate is responsible for operating the metal finishing facility at JSC. The Engineering Directorate is responsible for $71.4 million of space flight hardware design, fabrication and testing. The JSC Metal Finishing Facility processes flight hardware to support the programs in particular schedule and mission critical flight hardware. The JSC Metal Finishing Facility is operated by Rothe Joint Venture. The Facility provides following processes: anodizing, alodining, passivation, and pickling. JSC Metal Finishing Facility completely rebuilt in 1998. Total cost of $366,000. All new tanks, electrical, plumbing, and ventilation installed. Designed to meet modern safety, environmental, and quality requirements. Designed to minimize contamination and provide the highest quality finishes.

Evaluator's Guide for Microcomputer-Based Instructional Packages. Developed by MicroSIFT, a Project of the Computer Technology Program. Sixth Revision.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This guide developed by MicroSIFT, a clearinghouse for microcomputer-based educational software and courseware, provides background information and forms to aid teachers and other educators in evaluating available microcomputer courseware. The evaluation process comprises six stages: (1) sifting, which screens out those programs that are not…

Census, CD-ROM, and You! New Horizons for Microcomputer Users of Census Bureau Data.

ERIC Educational Resources Information Center

Bureau of the Census (DOC), Washington, DC. Data User Services Div.

This introductory guide to Census Bureau data that is currently available to microcomputer users on compact disc (CD-ROM) begins by explaining the types of information available, how CD-ROM works, and the hardware and software required to access the databases using a microcomputer. Descriptions of data currently available on CD-ROM include…

The Mighty Micro: It Will Do More to Create an Open Society than Any Previous Invention.

ERIC Educational Resources Information Center

Pournelle, Jerry

1984-01-01

Describes ways in which microcomputers will create an open society and discusses the impact on the microcomputer industry of: (1) CP/M (Control Program for Microcomputers); (2) IBM's Personal Computer; (3) the capability of programing in higher-level languages; and (4) the decline in cost of software. (MBR)

User-Adaptable Microcomputer Graphics Software for Life Science Instruction. Final Project Report.

ERIC Educational Resources Information Center

Spain, James D.

The objectives of the SUMIT project was to develop, evaluate, and disseminate 20 course modules (microcomputer programs) for instruction in general biology and ecology. To encourage broad utilization, the programs were designed for the Apple II microcomputer and written in Applesoft Basic with a user-adaptable format. Each package focused on a key…

A Longitudinal Study of Microcomputer Usage at the Community College Level in Kansas, Spring/94.

ERIC Educational Resources Information Center

Leite, Pedro T.

As part of a longitudinal project to inventory computer equipment and identify current instructional use of microcomputers in Kansas community colleges, surveys were sent to the 19 community colleges in Kansas in spring 1994. The surveys solicited data on student enrollment, which subject areas utilized microcomputers, types of hardware available,…

Implications of Hand Held Electronic Games and Microcomputers for Informal Learning.

ERIC Educational Resources Information Center

Kee, Daniel W.

The use of hand-held electronic devices and microcomputers in places of public access and in the home are discussed. First, the different activities supported by this technology are described, with emphasis on the commonality of game playing to both hand-held devices and microcomputers. The need for research to investigate the motivational…

MSEA--The Department's Microcomputer. The Illinois Series on Educational Applications of Computer. Report No. 27.

ERIC Educational Resources Information Center

Muiznieks, Viktors

This report provides a technical description and operating guidelines for the IMSAI 8080 microcomputer in the Department of Secondary Education at the University of Illinois. An overview of the microcomputer highlights the register array, address logic, arithmetic and logical unit, instruction register and control section, and the data bus buffer.…

Choosing a Microcomputer for Use as a Teaching Aid.

ERIC Educational Resources Information Center

Visniesky, Cheryl; Hocking, Joan

A step-by-step guide to the selection of a microcomputer system is provided for educators having made the decision to implement computer-assisted instruction. The first step is to clarify reasons for using a microcomputer rather than conventional instructional materials. Next, the degree of use (e.g., types of courses and number of departments…

A microcomputer program for analysis of nucleic acid hybridization data

PubMed Central

Green, S.; Field, J.K.; Green, C.D.; Beynon, R.J.

1982-01-01

The study of nucleic acid hybridization is facilitated by computer mediated fitting of theoretical models to experimental data. This paper describes a non-linear curve fitting program, using the `Patternsearch' algorithm, written in BASIC for the Apple II microcomputer. The advantages and disadvantages of using a microcomputer for local data processing are discussed. Images PMID:7071017

An Administrator's Guide to Microcomputer Resources. Research & Development Series No. 239B.

ERIC Educational Resources Information Center

Zahniser, Gale; And Others

This guide is designed to help educators sort through the vast amount of information that exists about the educational use of microcomputers. The first of five chapters takes the educational administrator through the decision process that is typically associated with choosing and adopting microcomputers for the school. For each point in this…

Microcomputers in Small Business Management. Leadership and Training Series No. 64.

ERIC Educational Resources Information Center

Heath, Betty; Camp, William G.

This guide is designed to assist vocational educators in training individuals at the secondary, postsecondary, and adult levels to use microcomputers in small business management. An overview of the use of microcomputers in the small business setting is provided in the introduction. Included in the next section is a multi-page matrix dealing with…

End-Use Load and Conservation Assessment Program : Co-Instrumentation Test of Two Microcomputer-Based Energy Monitoring Systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fishbaugher, M. J.

1985-05-01

The decreasing cost of microcomputers along with improvements in power metering circuitry have changed the way in which electrical energy use is monitored. Although utilities still rely on kilowatt-hour (kWh) meters for billing purposes, a microcomputer-based monitoring system is used when greater temporal and end-use resolution is desired. Because these types of monitoring systems will be used increasingly in large-scale conservation and end-use studies, it is important that their performance be analyzed to determine their accuracy. A co-instrumentation test was devised in which two such microcomputer-based monitoring systems made simultaneous measurements of electrical end-uses in two commercial buildings. The analysismore » of the co-instrumentation data aids in the evaluation of microcomputer-based monitoring systems used for end-use measurements. Separate and independent data loggers were used to measure the same loads simultaneously. In addition to these two systems, a utility billing meter measured the total energy use in each building during the co-instrumentation test. The utility's meters provided a relatively accurate standard by which the performance of both loggers could be judged. The comparison between the SCL and PNL microcomputer-based loggers has shown that power measurement techniques directly affect system performance. The co-instrumentation test has shown that there are certain standards that a monitoring system must meet if it is to perform well. First, it is essential to calibrate a microcomputer-based logger against a known standard load before the system is installed. Second, a microcomputer-based system must have some way of accounting for power factors. Recent advances in power metering circuitry have made it relatively easy to apply these power factors automatically in real time.« less

Nondestructive microimaging during preclinical pin-on-plate testing of novel materials for arthroplasty.

PubMed

Teeter, Matthew G; Langohr, G Daniel G; Medley, John B; Holdsworth, David W

2014-02-01

The purpose of this study was to determine the ability of micro-computed tomography to quantify wear in preclinical pin-on-plate testing of materials for use in joint arthroplasty. Wear testing of CoCr pins articulating against six polyetheretherketone plates was performed using a pin-on-plate apparatus over 2 million cycles. Change in volume due to wear was quantified with gravimetric analysis and with micro-computed tomography, and the volumes were compared. Separately, the volume of polyetheretherketone pin-on-plate specimens that had been soaking in fluid for 52 weeks was quantified with both gravimetric analysis and micro-computed tomography, and repeated after drying. The volume change with micro-computed tomography was compared to the mass change with gravimetric analysis. The mean wear volume measured was 8.02 ± 6.38 mm(3) with gravimetric analysis and 6.76 ± 5.38 mm(3) with micro-computed tomography (p = 0.06). Micro-computed tomography volume measurements did not show a statistically significant change with drying for either the plates (p = 0.60) or the pins (p = 0.09), yet drying had a significant effect on the gravimetric mass measurements for both the plates (p = 0.03) and the pins (p = 0.04). Micro-computed tomography provided accurate measurements of wear in polyetheretherketone pin-on-plate test specimens, and no statistically significant change was caused by fluid uptake. Micro-computed tomography quantifies wear depth and wear volume, mapped to the specific location of damage on the specimen, and is also capable of examining subsurface density as well as cracking. Its noncontact, nondestructive nature makes it ideal for preclinical testing of materials, in which further additional analysis techniques may be utilized.

The microcomputer workstation - An alternate hardware architecture for remotely sensed image analysis

NASA Technical Reports Server (NTRS)

Erickson, W. K.; Hofman, L. B.; Donovan, W. E.

1984-01-01

Difficulties regarding the digital image analysis of remotely sensed imagery can arise in connection with the extensive calculations required. In the past, an expensive large to medium mainframe computer system was needed for performing these calculations. For image-processing applications smaller minicomputer-based systems are now used by many organizations. The costs for such systems are still in the range from $100K to $300K. Recently, as a result of new developments, the use of low-cost microcomputers for image processing and display systems appeared to have become feasible. These developments are related to the advent of the 16-bit microprocessor and the concept of the microcomputer workstation. Earlier 8-bit microcomputer-based image processing systems are briefly examined, and a computer workstation architecture is discussed. Attention is given to a microcomputer workstation developed by Stanford University, and the design and implementation of a workstation network.

Use of microcomputers in health and social service applications in developing nations.

PubMed

Bertrand, W E

1987-01-01

The microcomputer is creating something of a revolution in many developing nations where historically there has been a lack of access to computer power at all levels of the health sector. For the first time, practitioners and researchers, often trained in computer techniques for developing countries, have access through microcomputers to data and information manipulation in their local workplace. While the history of microcomputers in such settings is short, this article presents early evidence from several countries which indicates the usefulness of various applications. The majority of the applications reported in the literature from clinical and research laboratories is made up of national data base systems and special studies of morbidity and mortality. Secondary applications, including assistance in biographical searches and word and graphics processing, are also reviewed in this article. A summary of the most utilized microcomputer hardware configurations completes the review.

Charge control microcomputer device for vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morishita, M.; Kouge, S.

1986-08-26

A charge control microcomputer device is described for a vehicle, comprising: an AC generator driven by an engine for generating an output current, the generator having armature coils and a field coil; a battery charged by a rectified output of the generator and generating a terminal voltage; a voltage regulator for controlling a current flowing in the field coil, to control an output voltage of the generator to a predetermined value; an engine controlling microcomputer for receiving engine parameter data from the engine, to control the operation of the engine; a charge control microcomputer for processing input data including datamore » on at least one engine parameter output from the engine controlling microcomputer, and charge system data including at least one of battery terminal voltage data, generator voltage data and generator output current data, to provide a reference voltage for the voltage regulator.« less

Microcomputer software development facilities

NASA Technical Reports Server (NTRS)

Gorman, J. S.; Mathiasen, C.

1980-01-01

A more efficient and cost effective method for developing microcomputer software is to utilize a host computer with high-speed peripheral support. Application programs such as cross assemblers, loaders, and simulators are implemented in the host computer for each of the microcomputers for which software development is a requirement. The host computer is configured to operate in a time share mode for multiusers. The remote terminals, printers, and down loading capabilities provided are based on user requirements. With this configuration a user, either local or remote, can use the host computer for microcomputer software development. Once the software is developed (through the code and modular debug stage) it can be downloaded to the development system or emulator in a test area where hardware/software integration functions can proceed. The microcomputer software program sources reside in the host computer and can be edited, assembled, loaded, and then downloaded as required until the software development project has been completed.

Computer Lab Tools for Science: An Analysis of Commercially Available Science Interfacing Software for Microcomputers. A Quarterly Report.

ERIC Educational Resources Information Center

Weaver, Dave

Science interfacing packages (also known as microcomputer-based laboratories or probeware) generally consist of a set of programs on disks, a user's manual, and hardware which includes one or more sensory devices. Together with a microcomputer they combine to make a powerful data acquisition and analysis tool. Packages are available for accurately…

Microcomputers in Academic Departments: The Consequences of Implementing Distributive Desk-Top Computing to Faculty and Staff.

ERIC Educational Resources Information Center

Winans, Glen T.

This paper presents a descriptive review of how the Provost's Office of the College of Letters and Science at the University of California, Santa Barbara (UCSB) implemented 330 microcomputers in the 34 academic departments from July 1984 through June 1986. The decision to implement stand-alone microcomputers was based on four concerns: increasing…

Computer and Software Abuse Policies. Microcomputing Working Paper Series A 84-7.

ERIC Educational Resources Information Center

Smith, Shirley C.

This document was designed to assist computer users with the ethical issues created by the widespread use of microcomputers at Drexel University, where there were over 5,000 Macintosh microcomputers in use on the campus as of the fall of 1984. It explains to faculty, students, and staff what the university expects and the law demands in regard to…

AUTOCASK (AUTOmatic Generation of 3-D CASK models). A microcomputer based system for shipping cask design review analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerhard, M.A.; Sommer, S.C.

1995-04-01

AUTOCASK (AUTOmatic Generation of 3-D CASK models) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for the structural analysis of shipping casks for radioactive material. Model specification is performed on the microcomputer, and the analyses are performed on an engineering workstation or mainframe computer. AUTOCASK is based on 80386/80486 compatible microcomputers. The system is composed of a series of menus, input programs, display programs, a mesh generation program, and archive programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests.

Charge control microcomputer device for vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morishita, M.; Kouge, S.

1986-10-14

This patent describes a charge control microcomputer device for a vehicle, comprising: speed changing means for transmitting the output torque of an engine. The speed changing means includes a slip clutch means having an output with a variable slippage amount with respect to its input and controlled in accordance with an operating instruction. The speed changing means further includes a speed change gear for changing the rotational speed input thereto at an output thereto, the speed change gear receiving the output of the slip clutch means; a charging generator driven by the output of the speed change gear; a batterymore » charged by an output voltage of the charging generator; a voltage regulator for controlling the output voltage of the charging generator to a predetermined value; an engine controlling microcomputer for receiving data from the engine, to control the engine, the engine data comprising at least an engine speed signal; a charge control microcomputer for processing engine data from the engine controlling microcomputer and charge system data including terminal voltage data from the battery and generated voltage data from the changing generator; and a display unit for displaying detection data, including fault detection data, form the charge control microcomputer.« less

Modified Laser and Thermos cell calculations on microcomputers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shapiro, A.; Huria, H.C.

1987-01-01

In the course of designing and operating nuclear reactors, many fuel pin cell calculations are required to obtain homogenized cell cross sections as a function of burnup. In the interest of convenience and cost, it would be very desirable to be able to make such calculations on microcomputers. In addition, such a microcomputer code would be very helpful for educational course work in reactor computations. To establish the feasibility of making detailed cell calculations on a microcomputer, a mainframe cell code was compiled and run on a microcomputer. The computer code Laser, originally written in Fortran IV for the IBM-7090more » class of mainframe computers, is a cylindrical, one-dimensional, multigroup lattice cell program that includes burnup. It is based on the MUFT code for epithermal and fast group calculations, and Thermos for the thermal calculations. There are 50 fast and epithermal groups and 35 thermal groups. Resonances are calculated assuming a homogeneous system and then corrected for self-shielding, Dancoff, and Doppler by self-shielding factors. The Laser code was converted to run on a microcomputer. In addition, the Thermos portion of Laser was extracted and compiled separately to have available a stand alone thermal code.« less

Design of 3D-Printed Titanium Compliant Mechanisms

NASA Technical Reports Server (NTRS)

Merriam, Ezekiel G.; Jones, Jonathan E.; Howell, Larry L.

2014-01-01

This paper describes 3D-printed titanium compliant mechanisms for aerospace applications. It is meant as a primer to help engineers design compliant, multi-axis, printed parts that exhibit high performance. Topics covered include brief introductions to both compliant mechanism design and 3D printing in titanium, material and geometry considerations for 3D printing, modeling techniques, and case studies of both successful and unsuccessful part geometries. Key findings include recommended flexure geometries, minimum thicknesses, and general design guidelines for compliant printed parts that may not be obvious to the first time designer.

Using Changes in Binding Globulins to Assess Oral Contraceptive Compliance

PubMed Central

Westhoff, Carolyn; Petrie, K.A.; Cremers, S.

2012-01-01

Background Validity of oral contraceptive pill (OCP) clinical trial results depends on participant compliance. Ethinyl estradiol (EE2) induces increases in hepatic binding globulin (BG) levels. Measuring these BG increases may provide an effective and convenient approach to distinguishing non-compliant from compliant OCP users in research settings. This analysis evaluated the usefulness of measuring increases in corticosteroid, sex hormone and thyroxine binding globulins (CBG, SHBG, TBG) as measures of OCP compliance. Methods We used frozen serum from a trial that compared ovarian suppression between normal weight and obese women randomized to one of two OCPs containing EE2 and levonorgestrel (LNG). Based on serial LNG measurements during the trial, 17% of participants were non-compliant. We matched non-compliant participants with compliant participants by age, BMI, ethnicity and OCP formulation. We measured CBG, SHBG and TBG levels, and compared change from baseline to 3-month follow-up between the non-compliant and compliant participants. Construction of receiver operator characteristic (ROC) curves allowed comparison of various BG measures. Results Changes in CBG and TBG distinguished OCP non-compliant users from compliant users (area under the ROC curve (AUROC), 0.86 and 0.89, p < 0.01). Changes in SHBG were less discriminating (AUROC 0.69) Conclusions EE2 induced increases in CBG and TBG provide a sensitive integrated marker of compliance with an LNG-containing OCP. PMID:22795088

An Evaluator's Guide to Using DB MASTER: A Microcomputer Based File Management Program. Research on Evaluation Program, Paper and Report Series No. 91.

ERIC Educational Resources Information Center

Gray, Peter J.

Ways a microcomputer can be used to establish and maintain an evaluation database and types of data management features possible on a microcomputer are described in this report, which contains step-by-step procedures and numerous examples for establishing a database, manipulating data, and designing and printing reports. Following a brief…

Perception of the Use of High Technology in the Teaching of Reading: Microcomputer Use in Teaching Reading.

ERIC Educational Resources Information Center

Bradtmueller, Weldon G.

The past few years have seen a proliferation of microcomputers and a reduction in their cost. Many children have microcomputers in their homes and have learned their use in playing games and solving problems. Among these programs are those designed to improve reading skills, many of which are somewhat poorly conceived and prepared, often being…

Digital Imagery Compression Best Practices Guide - A Motion Imagery Standards Profile (MISP) Compliant Architecture

DTIC Science & Technology

2012-06-01

MISP) COMPLIANT ARCHITECTURE WHITE SANDS MISSILE RANGE REAGAN TEST SITE YUMA PROVING GROUND DUGWAY PROVING GROUND ABERDEEN TEST CENTER...DIGITAL MOTION IMAGERY COMPRESSION BEST PRACTICES GUIDE – A MOTION IMAGERY STANDARDS PROFILE (MISP) COMPLIANT ARCHITECTURE ...delivery, and archival purposes. These practices are based on a Motion Imagery Standards Profile (MISP) compliant architecture , which has been defined

The effect of compliance to a Rigo System Cheneau brace and a specific exercise programme on idiopathic scoliosis curvature: a comparative study: SOSORT 2014 award winner

PubMed Central

2014-01-01

Background There is controversy as to whether conservative management that includes wearing a brace and exercises is effective in stabilising idiopathic scoliosis curves. A brace only prevents progression of the curve and has been shown to have favourable outcomes when patients are compliant. So the aim of this study was to: determine the effect of compliance to the Rigo System Cheneau (RSC) brace and a specific exercise programme on Idiopathic Scoliosis curvature; and to compare the Quality of Life (QoL) and psychological traits of compliant and non compliant subjects. Methods A pre/post test study design was used with a post study comparison between subjects who complied with the management and those who did not. Fifty one subjects, girls aged 12-16 years, Cobb angles 20-50 degrees participated in the study. Subjects were divided into two groups, according to their compliance, at the end of the study. The compliant group wore the brace 20 or more hours a day and exercised three or more times per week. The non-compliant group wore the brace less than 20 hours a day and exercised less than three times per week. Cobb angles, vertebral rotation, scoliometer readings, peak flow, quality of life and personality traits were compared between groups, using the student’s two sample t-test and an analysis of covariance. Results The compliant group, wore the brace 21.5 hours per day and exercised four times a week, and significantly improved in all measures compared to non compliant subjects, who wore the brace 12 hours per day, exercised 1.7 times a week and significantly deteriorated (p < 0.0001). The major Cobb angles in the compliant group improved 10.19°(±5.5) and deteriorated 5.52°(±4.3) in the non compliant group (p < 0.0001). Compliant subjects had a significantly better QoL than the non compliant subjects (p = 0.001). The compliant group were significantly more emotionally mature, stable and realistic than the non compliant group (p = 0.03). Conclusions Good compliance of the RSC brace and a specific exercise regime resulted in a significant improvement in curvatures, poor compliance resulted in progression/deterioration. A poorer QoL in the non compliant group possibly was caused by personality traits of the group, being more emotionally immature and unstable. PMID:24926318

Change control microcomputer device for vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morishita, M.; Kouge, S.

1986-08-19

A charge control microcomputer device for a vehicle is described which consists of: a clutch device for transmitting the rotary output of an engine; a charging generator driven by the clutch device; a battery charged by an output of the charging generator; a voltage regulator for controlling an output voltage of the charging generator to a predetermined value; an engine controlling microcomputer for receiving engine data, to control the engine; and a charge control microcomputer for processing the engine data from the engine controlling microcomputer and charge system data including terminal voltage data from the battery and generated voltage datamore » from the charging generator, to determine a reference voltage for the voltage regulator in accordance with the engine data and the charge system data, and for processing an engine rotation signal to generate and apply an operating instruction to the clutch device in accordance with the engine data and the charge system data, such that the charging generator is driven within a predetermined range of revolutions per minute at all times.« less

A manual for microcomputer image analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rich, P.M.; Ranken, D.M.; George, J.S.

1989-12-01

This manual is intended to serve three basic purposes: as a primer in microcomputer image analysis theory and techniques, as a guide to the use of IMAGE{copyright}, a public domain microcomputer program for image analysis, and as a stimulus to encourage programmers to develop microcomputer software suited for scientific use. Topics discussed include the principals of image processing and analysis, use of standard video for input and display, spatial measurement techniques, and the future of microcomputer image analysis. A complete reference guide that lists the commands for IMAGE is provided. IMAGE includes capabilities for digitization, input and output of images,more » hardware display lookup table control, editing, edge detection, histogram calculation, measurement along lines and curves, measurement of areas, examination of intensity values, output of analytical results, conversion between raster and vector formats, and region movement and rescaling. The control structure of IMAGE emphasizes efficiency, precision of measurement, and scientific utility. 18 refs., 18 figs., 2 tabs.« less

Compliant walking appears metabolically advantageous at extreme step lengths.

PubMed

Kim, Jaehoon; Bertram, John E A

2018-05-19

Humans alter gait in response to unusual gait circumstances to accomplish the task of walking. For instance, subjects spontaneously increase leg compliance at a step length threshold as step length increases. Here we test the hypothesis that this transition occurs based on the level of energy expenditure, where compliant walking becomes less energetically demanding at long step lengths. To map and compare the metabolic cost of normal and compliant walking as step length increases. 10 healthy individuals walked on a treadmill using progressively increasing step lengths (100%, 120%, 140% and 160% of preferred step length), in both normal and compliant leg walking as energy expenditure was recorded via indirect calorimetry. Leg compliance was controlled by lowering the center-of-mass trajectory during stance, forcing the leg to flex and extend as the body moved over the foot contact. For normal step lengths, compliant leg walking was more costly than normal walking gait, but compliant leg walking energetic cost did not increase as rapidly for longer step lengths. This led to an intersection between normal and compliant walking cost curves at 114% relative step length (regression analysis; r 2  = 0.92 for normal walking; r 2  = 0.65 for compliant walking). Compliant leg walking is less energetically demanding at longer step lengths where a spontaneous shift to compliant walking has been observed, suggesting the human motor control system is sensitive to energetic requirements and will employ alternate movement patterns if advantageous strategies are available. The transition could be attributed to the interplay between (i) leg work controlling body travel during single stance and (ii) leg work to control energy loss in the step-to-step transition. Compliant leg walking requires more stance leg work at normal step lengths, but involves less energy loss at the step-to-step transition for very long steps. Copyright © 2018 Elsevier B.V. All rights reserved.

Can compliant fault zones be used to measure absolute stresses in the upper crust?

NASA Astrophysics Data System (ADS)

Hearn, E. H.; Fialko, Y.

2009-04-01

Geodetic and seismic observations reveal long-lived zones with reduced elastic moduli along active crustal faults. These fault zones localize strain from nearby earthquakes, consistent with the response of a compliant, elastic layer. Fault zone trapped wave studies documented a small reduction in P and S wave velocities along the Johnson Valley Fault caused by the 1999 Hector Mine earthquake. This reduction presumably perturbed a permanent compliant structure associated with the fault. The inferred changes in the fault zone compliance may produce a measurable deformation in response to background (tectonic) stresses. This deformation should have the same sense as the background stress, rather than the coseismic stress change. Here we investigate how the observed deformation of compliant zones in the Mojave Desert can be used to constrain the fault zone structure and stresses in the upper crust. We find that gravitational contraction of the coseismically softened zones should cause centimeters of coseismic subsidence of both the compliant zones and the surrounding region, unless the compliant fault zones are shallow and narrow, or essentially incompressible. We prefer the latter interpretation because profiles of line of sight displacements across compliant zones cannot be fit by a narrow, shallow compliant zone. Strain of the Camp Rock and Pinto Mountain fault zones during the Hector Mine and Landers earthquakes suggests that background deviatoric stresses are broadly consistent with Mohr-Coulomb theory in the Mojave upper crust (with μ ≥ 0.7). Large uncertainties in Mojave compliant zone properties and geometry preclude more precise estimates of crustal stresses in this region. With improved imaging of the geometry and elastic properties of compliant zones, and with precise measurements of their strain in response to future earthquakes, the modeling approach we describe here may eventually provide robust estimates of absolute crustal stress.

Impact of Compliance on Dysphagia Rehabilitation in Head and Neck Cancer Patients: Results from a Multi-center Clinical Trial.

PubMed

Krisciunas, Gintas P; Castellano, Kerlly; McCulloch, Timothy M; Lazarus, Cathy L; Pauloski, Barbara R; Meyer, Tanya K; Graner, Darlene; Van Daele, Douglas J; Silbergleit, Alice K; Crujido, Lisa R; Rybin, Denis; Doros, Gheorghe; Kotz, Tamar; Langmore, Susan E

2017-04-01

A 5-year, 16-site, randomized controlled trial enrolled 170 HNC survivors into active (estim + swallow exercise) or control (sham estim + swallowing exercise) arms. Primary analyses showed that estim did not enhance swallowing exercises. This secondary analysis determined if/how patient compliance impacted outcomes. A home program, performed 2 times/day, 6 days/week, for 12 weeks included stretches and 60 swallows paired with real or sham estim. Regular clinic visits ensured proper exercise execution, and detailed therapy checklists tracked patient compliance which was defined by mean number of sessions performed per week (0-12 times) over the 12-week intervention period. "Compliant" was defined as performing 10-12 sessions/week. Outcomes were changes in PAS, HNCI, PSS, OPSE, and hyoid excursion. ANCOVA analyses determined if outcomes differed between real/sham and compliant/noncompliant groups after 12 weeks of therapy. Of the 170 patients enrolled, 153 patients had compliance data. The mean number of sessions performed was 8.57/week (median = 10.25). Fifty-four percent of patients (n = 83) were considered "compliant." After 12 weeks of therapy, compliant patients in the sham estim group realized significantly better PAS scores than compliant patients in the active estim group (p = 0.0074). When pooling all patients together, there were no significant differences in outcomes between compliant and non-compliant patients. The addition of estim to swallowing exercises resulted in worse swallowing outcomes than exercises alone, which was more pronounced in compliant patients. Since neither compliant nor non-compliant patients benefitted from swallowing exercises, the proper dose and/or efficacy of swallowing exercises must also be questioned in this patient population.

Microcomputer data acquisition and control.

PubMed

East, T D

1986-01-01

In medicine and biology there are many tasks that involve routine well defined procedures. These tasks are ideal candidates for computerized data acquisition and control. As the performance of microcomputers rapidly increases and cost continues to go down the temptation to automate the laboratory becomes great. To the novice computer user the choices of hardware and software are overwhelming and sadly most of the computer sales persons are not at all familiar with real-time applications. If you want to bill your patients you have hundreds of packaged systems to choose from; however, if you want to do real-time data acquisition the choices are very limited and confusing. The purpose of this chapter is to provide the novice computer user with the basics needed to set up a real-time data acquisition system with the common microcomputers. This chapter will cover the following issues necessary to establish a real time data acquisition and control system: Analysis of the research problem: Definition of the problem; Description of data and sampling requirements; Cost/benefit analysis. Choice of Microcomputer hardware and software: Choice of microprocessor and bus structure; Choice of operating system; Choice of layered software. Digital Data Acquisition: Parallel Data Transmission; Serial Data Transmission; Hardware and software available. Analog Data Acquisition: Description of amplitude and frequency characteristics of the input signals; Sampling theorem; Specification of the analog to digital converter; Hardware and software available; Interface to the microcomputer. Microcomputer Control: Analog output; Digital output; Closed-Loop Control. Microcomputer data acquisition and control in the 21st Century--What is in the future? High speed digital medical equipment networks; Medical decision making and artificial intelligence.

A Generalized-Compliant-Motion Primitive

NASA Technical Reports Server (NTRS)

Backes, Paul G.

1993-01-01

Computer program bridges gap between planning and execution of compliant robotic motions developed and installed in control system of telerobot. Called "generalized-compliant-motion primitive," one of several task-execution-primitive computer programs, which receives commands from higher-level task-planning programs and executes commands by generating required trajectories and applying appropriate control laws. Program comprises four parts corresponding to nominal motion, compliant motion, ending motion, and monitoring. Written in C language.

Drag reduction through self-texturing compliant bionic materials

PubMed Central

Liu, Eryong; Li, Longyang; Wang, Gang; Zeng, Zhixiang; Zhao, Wenjie; Xue, Qunji

2017-01-01

Compliant fish skin is effectively in reducing drag, thus the design and application of compliant bionic materials may be a good choice for drag reduction. Here we consider the drag reduction of compliant bionic materials. First, ZnO and PDMS mesh modified with n-octadecane were prepared, the drag reduction of self-texturing compliant n-octadecane were studied. The results show that the mesh modified by ZnO and PDMS possess excellent lipophilic and hydrophobic, thus n-octadecane at solid, semisolid and liquid state all have good adhesion with modified mesh. The states of n-octadecane changed with temperature, thus, the surface contact angle and adhesive force all varies obviously at different state. The contact angle decreases with temperature, the adhesive force shows a lower value at semisolid state. Furthermore, the drag testing results show that the compliant n-octadecane film is more effectively in drag reduction than superhydrophobic ZnO/PDMS film, indicating that the drag reduction mechanism of n-octadecane is significantly different with superhydrophobic film. Further research shows that the water flow leads to self-texturing of semisolid state n-octadecane, which is similar with compliant fish skin. Therefore, the compliant bionic materials of semisolid state n-octadecane with regular bulge plays a major role in the drag reduction. PMID:28053309

Drag reduction through self-texturing compliant bionic materials.

PubMed

Liu, Eryong; Li, Longyang; Wang, Gang; Zeng, Zhixiang; Zhao, Wenjie; Xue, Qunji

2017-01-05

Compliant fish skin is effectively in reducing drag, thus the design and application of compliant bionic materials may be a good choice for drag reduction. Here we consider the drag reduction of compliant bionic materials. First, ZnO and PDMS mesh modified with n-octadecane were prepared, the drag reduction of self-texturing compliant n-octadecane were studied. The results show that the mesh modified by ZnO and PDMS possess excellent lipophilic and hydrophobic, thus n-octadecane at solid, semisolid and liquid state all have good adhesion with modified mesh. The states of n-octadecane changed with temperature, thus, the surface contact angle and adhesive force all varies obviously at different state. The contact angle decreases with temperature, the adhesive force shows a lower value at semisolid state. Furthermore, the drag testing results show that the compliant n-octadecane film is more effectively in drag reduction than superhydrophobic ZnO/PDMS film, indicating that the drag reduction mechanism of n-octadecane is significantly different with superhydrophobic film. Further research shows that the water flow leads to self-texturing of semisolid state n-octadecane, which is similar with compliant fish skin. Therefore, the compliant bionic materials of semisolid state n-octadecane with regular bulge plays a major role in the drag reduction.

Drag reduction through self-texturing compliant bionic materials

NASA Astrophysics Data System (ADS)

Liu, Eryong; Li, Longyang; Wang, Gang; Zeng, Zhixiang; Zhao, Wenjie; Xue, Qunji

2017-01-01

Compliant fish skin is effectively in reducing drag, thus the design and application of compliant bionic materials may be a good choice for drag reduction. Here we consider the drag reduction of compliant bionic materials. First, ZnO and PDMS mesh modified with n-octadecane were prepared, the drag reduction of self-texturing compliant n-octadecane were studied. The results show that the mesh modified by ZnO and PDMS possess excellent lipophilic and hydrophobic, thus n-octadecane at solid, semisolid and liquid state all have good adhesion with modified mesh. The states of n-octadecane changed with temperature, thus, the surface contact angle and adhesive force all varies obviously at different state. The contact angle decreases with temperature, the adhesive force shows a lower value at semisolid state. Furthermore, the drag testing results show that the compliant n-octadecane film is more effectively in drag reduction than superhydrophobic ZnO/PDMS film, indicating that the drag reduction mechanism of n-octadecane is significantly different with superhydrophobic film. Further research shows that the water flow leads to self-texturing of semisolid state n-octadecane, which is similar with compliant fish skin. Therefore, the compliant bionic materials of semisolid state n-octadecane with regular bulge plays a major role in the drag reduction.

Evaluation of the treatment of pectus carinatum with compressive orthotic bracing using three dimensional body scans.

PubMed

Wong, Kaitlyn E; Gorton, George E; Tashjian, David B; Tirabassi, Michael V; Moriarty, Kevin P

2014-06-01

The purpose of this study is to measure the effectiveness of compressive orthotic brace therapy for the treatment of pectus carinatum using an adjusted Haller Index (HI) measurement calculated from 3D body scan (BS) images. Pediatric patients with pectus carinatum were treated with either compressive orthotic bracing or observation. An adjusted BS Haller index (HI) was calculated from serial 3D BS images obtained on all patients. Medical records were evaluated to determine treatment with bracing and brace compliance more than 12hours daily. Compliant patient measurements were compared to non-compliant and non-brace groups. Forty patients underwent compressive orthotic bracing, while ten were observed. Twenty-three patients were compliant with bracing, and seventeen patients were non-compliant. Compliant patients exhibited an 8.2% increase, non-compliant patients had a 1.5% increase, and non-brace patients exhibited a 2.5% increase in BS HI. The change in BS HI of compliant patients was significantly different compared to non-brace patients (p=0.004) and non-compliant patients (p<0.001). Three dimensional BS is an effective, radiation free, and objective means to evaluate patients treated with compressive orthotic bracing. Copyright © 2014 Elsevier Inc. All rights reserved.

A Compliant Casing for Transonic Axial Compressors

NASA Technical Reports Server (NTRS)

Bloch, Gregory S.; Hah, Chunill

2003-01-01

A viewgraph presentation on the concept of compliant casing for transonic axial compressors is shown. The topics include: 1) Concept for compliant casing; 2) Rig and facility details; 3) Experimental results; and 4) Numerical results.

Hand forces exerted by long-term care staff when pushing wheelchairs on compliant and non-compliant flooring.

PubMed

Lachance, Chantelle C; Korall, Alexandra M B; Russell, Colin M; Feldman, Fabio; Robinovitch, Stephen N; Mackey, Dawn C

2018-09-01

Purpose-designed compliant flooring and carpeting have been promoted as a means for reducing fall-related injuries in high-risk environments, such as long-term care. However, it is not known whether these surfaces influence the forces that long-term care staff exert when pushing residents in wheelchairs. We studied 14 direct-care staff who pushed a loaded wheelchair instrumented with a triaxial load cell to test the effects on hand force of flooring overlay (vinyl versus carpet) and flooring subfloor (concrete versus compliant rubber [brand: SmartCells]). During straight-line pushing, carpet overlay increased initial and sustained hand forces compared to vinyl overlay by 22-49% over a concrete subfloor and by 8-20% over a compliant subfloor. Compliant subflooring increased initial and sustained hand forces compared to concrete subflooring by 18-31% when under a vinyl overlay. In contrast, compliant flooring caused no change in initial or sustained hand forces compared to concrete subflooring when under a carpet overlay. Copyright © 2018 Elsevier Ltd. All rights reserved.

Piaget and Microcomputer Learning Environments.

ERIC Educational Resources Information Center

Hofmann, Rich

1986-01-01

Four studies are offered from a Piagetian perspective on providing children with an optimal microcomputer environment. Guidelines stress the importance of flexibility, and a hierarchical software environment. (CL)

Turbine airfoil with dual wall formed from inner and outer layers separated by a compliant structure

DOEpatents

Campbell,; Christian X. , Morrison; Jay, A [Oviedo, FL

2011-12-20

A turbine airfoil usable in a turbine engine with a cooling system and a compliant dual wall configuration configured to enable thermal expansion between inner and outer layers while eliminating stress formation is disclosed. The compliant dual wall configuration may be formed a dual wall formed from inner and outer layers separated by a compliant structure. The compliant structure may be configured such that the outer layer may thermally expand without limitation by the inner layer. The compliant structure may be formed from a plurality of pedestals positioned generally parallel with each other. The pedestals may include a first foot attached to a first end of the pedestal and extending in a first direction aligned with the outer layer, and may include a second foot attached to a second end of the pedestal and extending in a second direction aligned with the inner layer.

49 CFR 661.7 - Waivers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... requirements applies to microprocessors, computers, microcomputers, or software, or other such devices, which... a product or device which merely contains a microprocessor or microcomputer and is not used solely...

49 CFR 661.7 - Waivers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... requirements applies to microprocessors, computers, microcomputers, or software, or other such devices, which... a product or device which merely contains a microprocessor or microcomputer and is not used solely...

49 CFR 661.7 - Waivers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... requirements applies to microprocessors, computers, microcomputers, or software, or other such devices, which... a product or device which merely contains a microprocessor or microcomputer and is not used solely...

49 CFR 661.7 - Waivers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... requirements applies to microprocessors, computers, microcomputers, or software, or other such devices, which... a product or device which merely contains a microprocessor or microcomputer and is not used solely...

49 CFR 661.7 - Waivers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... requirements applies to microprocessors, computers, microcomputers, or software, or other such devices, which... a product or device which merely contains a microprocessor or microcomputer and is not used solely...

EPA Administrative Order on Consent (AOC) with ERP Compliant Coke, LLC

EPA Pesticide Factsheets

This Administrative Order on Consent with ERP Compliant Coke was effective August 2016. The Walter Coke facility located in North Birmingham was purchased by ERP Compliant Coke, LLC in February 2016 out of bankruptcy proceedings.

The Application of Finite Element Solution Techniques in Structural Analysis on a Microcomputer.

DTIC Science & Technology

1981-12-01

my wife for her support of this research project and the amount of time she spent helping me in preparation. Thanks go to the personnel at Computer...questions which had to be answered concerning the microcomputer in relation to a sequentially programmed finite element program. The first was how big...central site, then usefullness of the microcomputer is limited. The first series of problems consisted of a simple truss structure, which was expanded

A User Oriented Microcomputer and Monitor System.

DTIC Science & Technology

1981-02-15

inhibit signal is generated by the Monitor to (1) prevent microcomputer bus timeout, and (2) suspend the micro- computer interval timers while the...PDPll is prevented until the user sets the BIT flag for the associated buffer memory. Completion of a buffer memory transfer generates monitor source...1553 NUX PIOU PRGRAMMED 10 IRECT MEMORY MONITOR 0I INTERAC JI LMEMOR COR POWER I J SUPPLIES 4 FIGURE 15. MICROCOMPUTER MAJOR AREAS 64 a uIu 1 ta 0 W o

A Design Method for a State Feedback Microcomputer Controller of a Wide Bandwidth Analog Plant.

DTIC Science & Technology

1983-12-01

Il IIIz NAVAL POSTGRADUATE SCHOOLMonterey, California THESIS A A DESIGN METHOD FOR A STATE FEEDBACK MICROCOMPUTER CONTROLLER OF A WIDE BANDWIDTH...of a microcomputer regulator, continuous or discrete method can be applied. The o:bjective of this thesis is to provide a continuous controller ...estimation and control type problem. In this thesis , a wide bandwidth analog computer system is chosen as the plant so that the effect of transport

Test plan for 32-bit microcomputers for the Water Resources Division; Chapter A, Test plan for acquisition of prototype 32-bit microcomputers

USGS Publications Warehouse

Hutchison, N.E.; Harbaugh, A.W.; Holloway, R.A.; Merk, C.F.

1987-01-01

The Water Resources Division (WRD) of the U.S. Geological Survey is evaluating 32-bit microcomputers to determine how they can complement, and perhaps later replace, the existing network of minicomputers. The WRD is also designing a National Water Information System (NWIS) that will combine and integrate the existing National Water Data Storage and Retrieval System (WATSTORE), National Water Data Exchange (NAWDEX), and components of several other existing systems. The procedures and testing done in a market evaluation of 32-bit microcomputers are documented. The results of the testing are documented in the NWIS Project Office. The market evaluation was done to identify commercially available hardware and software that could be used for implementing early NWIS prototypes to determine the applicability of 32-bit microcomputers for data base and general computing applications. Three microcomputers will be used for these prototype studies. The results of the prototype studies will be used to compile requirements for a Request for Procurement (RFP) for hardware and software to meet the WRD 's needs in the early 1990's. The identification of qualified vendors to provide the prototype hardware and software included reviewing industry literature, and making telephone calls and personal visits to prospective vendors. Those vendors that appeared to meet general requirements were required to run benchmark tests. (Author 's abstract)

Two Axis Pointing System (TAPS) attitude acquisition, determination, and control

NASA Technical Reports Server (NTRS)

Azzolini, John D.; Mcglew, David E.

1990-01-01

The Two Axis Pointing System (TAPS) is a 2 axis gimbal system designed to provide fine pointing of Space Transportation System (STS) borne instruments. It features center-of-mass instrument mounting and will accommodate instruments of up to 1134 kg (2500 pounds) which fit within a 1.0 by 1.0 by 4.2 meter (40 by 40 by 166 inch) envelope. The TAPS system is controlled by a microcomputer based Control Electronics Assembly (CEA), a Power Distribution Unit (PDU), and a Servo Control Unit (SCU). A DRIRU-II inertial reference unit is used to provide incremental angles for attitude propagation. A Ball Brothers STRAP star tracker is used for attitude acquisition and update. The theory of the TAPS attitude determination and error computation for the Broad Band X-ray Telescope (BBXRT) are described. The attitude acquisition is based upon a 2 star geometric solution. The acquisition theory and quaternion algebra are presented. The attitude control combines classical position, integral and derivative (PID) control with techniques to compensate for coulomb friction (bias torque) and the cable harness crossing the gimbals (spring torque). Also presented is a technique for an adaptive bias torque compensation which adjusts to an ever changing frictional torque environment. The control stability margins are detailed, with the predicted pointing performance, based upon simulation studies. The TAPS user interface, which provides high level operations commands to facilitate science observations, is outlined.

Improvements of gas-fired kiln by use of a microcomputer control system for the porcelain manufacture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loong, H.; Liang, C.C.; Tseng, K.T.

1988-01-01

The use of microcomputer control system to gas-fired kiln not only enhanced the porcelain kiln's productivity from 75% to 95% but also saved its operation cost around US$ 200,000 per year. The self-designed microcomputer control system can simultaneous set and control the firing conditions of the period kiln which was built up in our laboratory. Our period kiln having volume of 4 M/sup 3/ was insulated by ceramic fiber which is different from use of refractory in traditional kilns. At the bottom of the kiln is an off-gas tunnel connected with a chimney. Besides the auto start-up and continuous operationmore » of kiln, the main functions of this microcomputer control system are summarized.« less

Compliant flooring to prevent fall-related injuries in older adults: A scoping review of biomechanical efficacy, clinical effectiveness, cost-effectiveness, and workplace safety.

PubMed

Lachance, Chantelle C; Jurkowski, Michal P; Dymarz, Ania C; Robinovitch, Stephen N; Feldman, Fabio; Laing, Andrew C; Mackey, Dawn C

2017-01-01

Compliant flooring, broadly defined as flooring systems or floor coverings with some level of shock absorbency, may reduce the incidence and severity of fall-related injuries in older adults; however, a lack of synthesized evidence may be limiting widespread uptake. Informed by the Arksey and O'Malley framework and guided by a Research Advisory Panel of knowledge users, we conducted a scoping review to answer: what is presented about the biomechanical efficacy, clinical effectiveness, cost-effectiveness, and workplace safety associated with compliant flooring systems that aim to prevent fall-related injuries in healthcare settings? We searched academic and grey literature databases. Any record that discussed a compliant flooring system and at least one of biomechanical efficacy, clinical effectiveness, cost-effectiveness, or workplace safety was eligible for inclusion. Two independent reviewers screened and abstracted records, charted data, and summarized results. After screening 3611 titles and abstracts and 166 full-text articles, we included 84 records plus 56 companion (supplementary) reports. Biomechanical efficacy records (n = 50) demonstrate compliant flooring can reduce fall-related impact forces with minimal effects on standing and walking balance. Clinical effectiveness records (n = 20) suggest that compliant flooring may reduce injuries, but may increase risk for falls. Preliminary evidence suggests that compliant flooring may be a cost-effective strategy (n = 12), but may also result in increased physical demands for healthcare workers (n = 17). In summary, compliant flooring is a promising strategy for preventing fall-related injuries from a biomechanical perspective. Additional research is warranted to confirm whether compliant flooring (i) prevents fall-related injuries in real-world settings, (ii) is a cost-effective intervention strategy, and (iii) can be installed without negatively impacting workplace safety. Avenues for future research are provided, which will help to determine whether compliant flooring is recommended in healthcare environments.

Compliant flooring to prevent fall-related injuries in older adults: A scoping review of biomechanical efficacy, clinical effectiveness, cost-effectiveness, and workplace safety

PubMed Central

Jurkowski, Michal P.; Dymarz, Ania C.; Robinovitch, Stephen N.; Feldman, Fabio; Laing, Andrew C.; Mackey, Dawn C.

2017-01-01

Background Compliant flooring, broadly defined as flooring systems or floor coverings with some level of shock absorbency, may reduce the incidence and severity of fall-related injuries in older adults; however, a lack of synthesized evidence may be limiting widespread uptake. Methods Informed by the Arksey and O’Malley framework and guided by a Research Advisory Panel of knowledge users, we conducted a scoping review to answer: what is presented about the biomechanical efficacy, clinical effectiveness, cost-effectiveness, and workplace safety associated with compliant flooring systems that aim to prevent fall-related injuries in healthcare settings? We searched academic and grey literature databases. Any record that discussed a compliant flooring system and at least one of biomechanical efficacy, clinical effectiveness, cost-effectiveness, or workplace safety was eligible for inclusion. Two independent reviewers screened and abstracted records, charted data, and summarized results. Results After screening 3611 titles and abstracts and 166 full-text articles, we included 84 records plus 56 companion (supplementary) reports. Biomechanical efficacy records (n = 50) demonstrate compliant flooring can reduce fall-related impact forces with minimal effects on standing and walking balance. Clinical effectiveness records (n = 20) suggest that compliant flooring may reduce injuries, but may increase risk for falls. Preliminary evidence suggests that compliant flooring may be a cost-effective strategy (n = 12), but may also result in increased physical demands for healthcare workers (n = 17). Conclusions In summary, compliant flooring is a promising strategy for preventing fall-related injuries from a biomechanical perspective. Additional research is warranted to confirm whether compliant flooring (i) prevents fall-related injuries in real-world settings, (ii) is a cost-effective intervention strategy, and (iii) can be installed without negatively impacting workplace safety. Avenues for future research are provided, which will help to determine whether compliant flooring is recommended in healthcare environments. PMID:28166265

On the theory of compliant wall drag reduction in turbulent boundary layers

NASA Technical Reports Server (NTRS)

Ash, R. L.

1974-01-01

A theoretical model has been developed which can explain how the motion of a compliant wall reduces turbulent skin friction drag. Available experimental evidence at low speeds has been used to infer that a compliant surface selectively removes energy from the upper frequency range of the energy containing eddies and through resulting surface motions can produce locally negative Reynolds stresses at the wall. The theory establishes a preliminary amplitude and frequency criterion as the basis for designing effective drag reducing compliant surfaces.

Compliant Interfacial Layers in Thermoelectric Devices

NASA Technical Reports Server (NTRS)

Firdosy, Samad A. (Inventor); Li, Billy Chun-Yip (Inventor); Ravi, Vilupanur A. (Inventor); Fleurial, Jean-Pierre (Inventor); Caillat, Thierry (Inventor); Anjunyan, Harut (Inventor)

2017-01-01

A thermoelectric power generation device is disclosed using one or more mechanically compliant and thermally and electrically conductive layers at the thermoelectric material interfaces to accommodate high temperature differentials and stresses induced thereby. The compliant material may be metal foam or metal graphite composite (e.g. using nickel) and is particularly beneficial in high temperature thermoelectric generators employing Zintl thermoelectric materials. The compliant material may be disposed between the thermoelectric segments of the device or between a thermoelectric segment and the hot or cold side interconnect of the device.

Microcomputer-controlled world time display for public area viewing

NASA Astrophysics Data System (ADS)

Yep, S.; Rashidian, M.

1982-05-01

The design, development, and implementation of a microcomputer-controlled world clock is discussed. The system, designated international Time Display System (ITDS), integrates a Geochron Calendar Map and a microcomputer-based digital display to automatically compensate for daylight savings time, leap year, and time zone differences. An in-depth technical description of the design and development of the electronic hardware, firmware, and software systems is provided. Reference material on the time zones, fabrication techniques, and electronic subsystems are also provided.

An Evaluation of the Availability and Application of Microcomputer Software Programs for Use in Air Force Ground Transportation Squadrons

DTIC Science & Technology

1988-09-01

software programs capable of being used on a microcomputer will be considered for analysis. No software intended for use on a miniframe or mainframe...Dial-A-Log consists of a program written in a computer language called L-10 that is run on a DEC-20 miniframe . The combination of the specific...proliferation of software dealing with microcomputers. Instead, they were geared more towards managing the use of miniframe or mainframe computer

Database Management System

NASA Technical Reports Server (NTRS)

1990-01-01

In 1981 Wayne Erickson founded Microrim, Inc, a company originally focused on marketing a microcomputer version of RIM (Relational Information Manager). Dennis Comfort joined the firm and is now vice president, development. The team developed an advanced spinoff from the NASA system they had originally created, a microcomputer database management system known as R:BASE 4000. Microrim added many enhancements and developed a series of R:BASE products for various environments. R:BASE is now the second largest selling line of microcomputer database management software in the world.

A memory-mapped output interface: Omega navigation output data from the JOLT (TM) microcomputer

NASA Technical Reports Server (NTRS)

Lilley, R. W.

1976-01-01

A hardware interface which allows both digital and analog data output from the JOLT microcomputer is described in the context of a software-based Omega Navigation receiver. The interface hardware described is designed for output of six (or eight with simple extensions) bits of binary output in response to a memory store command from the microcomputer. The interface was produced in breadboard form and is operational as an evaluation aid for the software Omega receiver.

Hepatic fat quantification magnetic resonance for monitoring treatment response in pediatric nonalcoholic steatohepatitis.

PubMed

Koh, Hong; Kim, Seung; Kim, Myung-Joon; Kim, Hyun Gi; Shin, Hyun Joo; Lee, Mi-Jung

2015-09-07

To evaluate the possibility of treatment effect monitoring using hepatic fat quantification magnetic resonance (MR) in pediatric nonalcoholic steatohepatitis (NASH). We retrospectively reviewed the medical records of patients who received educational recommendations and vitamin E for NASH and underwent hepatic fat quantification MR from 2011 to 2013. Hepatic fat fraction (%) was measured using dual- and triple-echo gradient-recalled-echo sequences at 3T. The compliant and non-compliant groups were compared clinically, biochemically, and radiologically. Twenty seven patients (M:F = 24:3; mean age: 12 ± 2.3 years) were included (compliant group = 22, non-compliant = 5). None of the baseline findings differed between the 2 groups, except for triglyceride level (compliant vs non-compliant, 167.7 mg/dL vs 74.2 mg/dL, P = 0.001). In the compliant group, high-density lipoprotein increased and all other parameters decreased after 1-year follow-up. However, there were various changes in the non-compliant group. Dual-echo fat fraction (-19.2% vs 4.6, P < 0.001), triple-echo fat fraction (-13.4% vs 3.5, P < 0.001), alanine aminotransferase (-110.7 IU/L vs -10.6 IU/L, P = 0.047), total cholesterol (-18.1 mg/dL vs 3.8 mg/dL, P = 0.016), and triglyceride levels (-61.3 mg/dL vs 11.2 mg/dL, P = 0.013) were significantly decreased only in the compliant group. The change in body mass index and dual-echo fat fraction showed a positive correlation (ρ = 0.418, P = 0.030). Hepatic fat quantification MR can be a non-invasive, quantitative and useful tool for monitoring treatment effects in pediatric NASH.

The Practical Use of Microcomputers in Rehabilitation.

ERIC Educational Resources Information Center

Vanderheiden, Gregg C.

1983-01-01

The application of microcomputers for handicapped individuals has tremendous potential. Barriers needing research include: access by the handicapped to the available software, aids that are portable, the problem of obsolescence. (SEW)

The Microcomputer in the Small School District.

ERIC Educational Resources Information Center

Whitworth, Jerry

1985-01-01

Small school district administrators can use microcomputers to improve their management abilities and productivity through computerized accounting, electronic mail and online subscription services, and the use of integrated software programs. (MD)

Microcomputer-Aided Control Systems Design.

ERIC Educational Resources Information Center

Roat, S. D.; Melsheimer, S. S.

1987-01-01

Describes a single input/single output feedback control system design program for IBM PC and compatible microcomputers. Uses a heat exchanger temperature control loop to illustrate the various applications of the program. (ML)

The Heartbreak of Cyberphobia.

ERIC Educational Resources Information Center

Anderson, John J.

1983-01-01

Discusses the potential of microcomputers, indicating that, like an automobile, they can be used without knowing how they operate. Considers the microcomputer role in education, entertainment, telecommunications, and other areas such as artificial intelligence. (JN)

Microcomputer array processor system. [design for electronic warfare

NASA Technical Reports Server (NTRS)

Slezak, K. D.

1980-01-01

The microcomputer array system is discussed with specific attention given to its electronic warware applications. Several aspects of the system architecture are described as well as some of its distinctive characteristics.

The Electronic Hermit: Trends in Library Automation.

ERIC Educational Resources Information Center

LaRue, James

1988-01-01

Reviews trends in library software development including: (1) microcomputer applications; (2) CD-ROM; (3) desktop publishing; (4) public access microcomputers; (5) artificial intelligence; (6) mainframes and minicomputers; and (7) automated catalogs. (MES)

Teaching WP and DP with CP/M-Based Microcomputers.

ERIC Educational Resources Information Center

Bartholome, Lloyd W.

1982-01-01

The use of CP/M (Control Program Monitor)-based microcomputers in teaching word processing and data processing is explored. The system's advantages, variations, dictionary software, and future are all discussed. (CT)

Microcomputer Scheduling of Reference Desk Staff.

ERIC Educational Resources Information Center

Cornick, Donna; Owen, Willy

1988-01-01

Presents a model that can accommodate staff preferences when determining a reference desk schedule using a microcomputer, the Lotus 1-2-3 spreadsheet software, and the linear programing software LP83. (eight references) (MES)

Reading Diagnosis via the Microcomputer (The Printout).

ERIC Educational Resources Information Center

Weisberg, Renee; Balajthy, Ernest

1989-01-01

Examines and evaluates microcomputer software designed to assist in diagnosing students' reading abilities and making instructional decisions. Claims that existing software shows valuable potential when used sensibly and critically by trained reading clinicians. (MM)

Investigating Electromagnetic Induction through a Microcomputer-Based Laboratory.

ERIC Educational Resources Information Center

Trumper, Ricardo; Gelbman, Moshe

2000-01-01

Describes a microcomputer-based laboratory experiment designed for high school students that very accurately analyzes Faraday's law of electromagnetic induction, addressing each variable separately while the others are kept constant. (Author/CCM)

Badging, Real ID

Science.gov Websites

. REAL ID LANL Impacts and Solutions The federal government has determined New Mexico is non-compliant Identification Cards whom will also become Non-Compliant. Access through LANL Vehicle Access Portals unaffected alternate ID if they are coming from "non-compliant" REAL-ID states LANS and the Field Office have

Performance of a non-tapered 3D morphing wing with integrated compliant ribs

NASA Astrophysics Data System (ADS)

Previtali, F.; Ermanni, P.

2012-05-01

Morphing wings have a high potential for improving the performance and reducing the fuel consumption of modern aircraft. Thanks to its simplicity, the compliant belt-rib concept is regarded by the authors as a promising solution. Using the compliant rib designed by Hasse and Campanile as a starting point, a compliant morphing wing made of composite materials is designed. Innovative methods for optimal placing of the actuation and for the quantification of the morphing are used. The performance of the compliant morphing wing in terms of three-dimensional (3D) structural behaviour and aerodynamic properties, both two- and three-dimensional, is presented and discussed. The fundamental importance of considering 3D coupling effects in the determination of the performance of morphing aerofoils is shown.

A research strategy for the dynamic study of students' concepts and problem solving strategies using science software

NASA Astrophysics Data System (ADS)

Krajcik, Joseph S.; Simmons, Patricia E.; Lunetta, Vincent N.

Microcomputers and appropriate software have the potential to help students learn. They can also serve as appropriate media for investigating how students learn. In this article we describe a research strategy examining learning and behavior when students interacted with microcomputers and software. Results from two preliminary studies illustrate the strategy.A major feature of the strategy included recording students interacting with microcomputer software interfaced with a VCR. The VCR recorded the video output from a microcomputer and students' verbal commentary via microphone input. This technique allowed students' comments about their observations, perceptions, predictions, explanations, and decisions to be recorded simultaneously with their computer input and the display on the microcomputer monitor.The research strategy described can provide important information about cognitive and affective behaviors of students engaged in using instructional software. Research studies utilizing this strategy can enhance our understanding of how students develop and employ important concepts and scientific relationships, how students develop problem-solving skills and solve problems, and how they interact with instructional software. Results of such studies have important implications for teaching and for the design of instructional software.

Microcomputer Typewriting in Business Education.

ERIC Educational Resources Information Center

Schmidt, B. June; Stewart, Jeffrey R.

1983-01-01

Describes a research project on the role of the instructor in managing microcomputer typewriting instruction. The teachers selected software, familiarized students with the equipment, provided support, monitored progress, helped students establish goals, and provided instructional activities. (JOW)

[A heart function measuring and analyzing instrument based on single-chip microcomputer].

PubMed

Rong, Z; Liang, H; Wang, S

1999-05-01

An Introduction a measuring and analyzing instrument, based on the single-chip microcomputer, which provides sample gathering, processing, controlling, adjusting, keyboard and printing. All informations are provided and displayed in Chinese.

Microcomputer Controlled Experiments.

ERIC Educational Resources Information Center

Kirkman, John; Knaggs, David

1982-01-01

Describes a microcomputer-controlled system which determines the current/voltage characteristics of a resistor, lamp, and diode, detailing system elements, construction, and providing printout of the program developed to provide control and arithmetic functions necessary to complete the experiment. (SK)

Computer Center: Setting Up a Microcomputer Center--1 Person's Perspective.

ERIC Educational Resources Information Center

Duhrkopf, Richard, Ed.; Collins, Michael, A. J., Ed.

1988-01-01

Considers eight components to be considered in setting up a microcomputer center for use with college classes. Discussions include hardware, software, physical facility, furniture, technical support, personnel, continuing financial expenditures, and security. (CW)

Microcomputer Applications in the Management of Paratransit Operations

DOT National Transportation Integrated Search

1981-08-01

The technological advances in the field of microcomputer systems offer some real opportunities to assist in the improvement of small paratransit operations and management in practical and readily implementable terms. The retail outlet availability an...

Library Computing.

ERIC Educational Resources Information Center

Goodgion, Laurel; And Others

1986-01-01

Eight articles in special supplement to "Library Journal" and "School Library Journal" cover a computer program called "Byte into Books"; microcomputers and the small library; creating databases with students; online searching with a microcomputer; quality automation software; Meckler Publishing Company's…

Bringing the Microcomputer into the Junior High: A Success Story from Florida.

ERIC Educational Resources Information Center

Miller, Benjamin S.

1982-01-01

Describes the introduction of an Apple II microcomputer into Miami Lakes (Florida) Junior High School and its success in generating enthusiasm among teachers, students, parents, and the community. (Author/RW)

Microcomputer Simulated CAD for Engineering Graphics.

ERIC Educational Resources Information Center

Huggins, David L.; Myers, Roy E.

1983-01-01

Describes a simulated computer-aided-graphics (CAD) program at The Pennsylvania State University. Rationale for the program, facilities, microcomputer equipment (Apple) used, and development of a software package for simulating applied engineering graphics are considered. (JN)

The Seven Deadly Sins of Online Microcomputing.

ERIC Educational Resources Information Center

King, Alan

1989-01-01

Offers suggestions for avoiding common errors in online microcomputer use. Areas discussed include learning the basics; hardware protection; backup options; hard disk organization; software selection; file security; and the use of dedicated communications lines. (CLB)

Financial Planning in Transit : Use of Commercially Available Microcomputer Software

DOT National Transportation Integrated Search

1983-11-01

This report addresses the potential of using commercially available microcomputer software for transit financial planning activities. Discussions with transit operators identified the need for inexpensive, easy to use software for ridership and fare ...

The Role of Microcomputers in Libraries.

ERIC Educational Resources Information Center

Lundeen, Gerald

1980-01-01

Describes the functions and characteristics of the microcomputer and discusses library applications including cataloging, circulation, acquisitions, serials control, reference and database systems, administration, current and future trends, and computers as media. Twenty references are listed. (CHC)

Microcomputers in a Beginning Tertiary Physics Course.

ERIC Educational Resources Information Center

Pearce, J. M.; O'Brien, R.

1986-01-01

Describes a college-level physics course which focuses on both physics knowledge/skills and use of microcomputers. Types of experiments done with the computers and how students use the computers to treat data are considered. (JN)

Ultra-processed family foods in Australia: nutrition claims, health claims and marketing techniques.

PubMed

Pulker, Claire Elizabeth; Scott, Jane Anne; Pollard, Christina Mary

2018-01-01

To objectively evaluate voluntary nutrition and health claims and marketing techniques present on packaging of high-market-share ultra-processed foods (UPF) in Australia for their potential impact on public health. Cross-sectional. Packaging information from five high-market-share food manufacturers and one retailer were obtained from supermarket and manufacturers' websites. Ingredients lists for 215 UPF were examined for presence of added sugar. Packaging information was categorised using a taxonomy of nutrition and health information which included nutrition and health claims and five common food marketing techniques. Compliance of statements and claims with the Australia New Zealand Food Standards Code and with Health Star Ratings (HSR) were assessed for all products. Almost all UPF (95 %) contained added sugars described in thirty-four different ways; 55 % of UPF displayed a HSR; 56 % had nutrition claims (18 % were compliant with regulations); 25 % had health claims (79 % were compliant); and 97 % employed common food marketing techniques. Packaging of 47 % of UPF was designed to appeal to children. UPF carried a mean of 1·5 health and nutrition claims (range 0-10) and 2·6 marketing techniques (range 0-5), and 45 % had HSR≤3·0/5·0. Most UPF packaging featured nutrition and health statements or claims despite the high prevalence of added sugars and moderate HSR. The degree of inappropriate or inaccurate statements and claims present is concerning, particularly on packaging designed to appeal to children. Public policies to assist parents to select healthy family foods should address the quality and accuracy of information provided on UPF packaging.

Analysis of Low-Speed Stall Aerodynamics of a Swept Wing with Seamless Flaps

NASA Technical Reports Server (NTRS)

Bui, Trong T.

2016-01-01

Computational fluid dynamics (CFD) analysis was conducted to study the low-speed stall aerodynamics of a Gulfstream G-III airplane (Gulfstream Aerospace Corporation, Savannah, Georgia) swept wing modified with an experimental seamless, compliant flap called the Adaptive Compliant Trailing Edge (ACTE) flap. The stall characteristics of the modified ACTE wing were analyzed and compared with the unmodified, clean wing at the flight speed of 120 knots and altitude of 2300 feet above mean sea level, in free air as well as in ground effect. A polyhedral finite-volume unstructured full Navier-Stokes CFD code, STAR-CCM (registered trademark) plus (CD-adapco [Computational Dynamics Limited, United Kingdom, and Analysis & Design Application Co., United States]), was used. Steady Reynolds-averaged Navier-Stokes CFD simulations were conducted for a clean wing and the ACTE wings at various ACTE deflection angles in free air (-2 degrees, 15 degrees, and 30 degrees) as well as in ground effect (15 degrees and 30 degrees). Solution sensitivities to grid densities were examined. In free air, the ACTE wings are predicted to stall at lower angles of attack than the clean wing. In ground effect, all wings are predicted to stall at lower angles of attack than the corresponding wings in free air. Even though the lift curves are higher in ground effect than in free air, the maximum lift coefficients for all wings are lower in ground effect. Finally, the lift increase due to ground effect for the ACTE wing is predicted to be less than the clean wing.

Automated Portable Test System (APTS) - A performance envelope assessment tool

NASA Technical Reports Server (NTRS)

Kennedy, R. S.; Dunlap, W. P.; Jones, M. B.; Wilkes, R. L.; Bittner, A. C., Jr.

1985-01-01

The reliability and stability of microcomputer-based psychological tests are evaluated. The hardware, test programs, and system control of the Automated Portable Test System, which assesses human performance and subjective status, are described. Subjects were administered 11 pen-and-pencil and microcomputer-based tests for 10 sessions. The data reveal that nine of the 10 tests stabilized by the third administration; inertial correlations were high and consistent. It is noted that the microcomputer-based tests display good psychometric properties in terms of differential stability and reliability.

Prototype microprocessor controller. [for STDN antennas

NASA Technical Reports Server (NTRS)

Zarur, J.; Kraeuter, R.

1980-01-01

A microcomputer controller for STDN antennas was developed. The microcomputer technology reduces the system's physical size by the implementation in firmware of functions. The reduction in the number of components increases system reliability and similar benefit is derived when a graphic video display is substituted for several control and indicator panels. A substantial reduction in the number of cables, connectors, and mechanical switches is achieved. The microcomputer based system is programmed to perform calibration and diagnostics, to update the satellite orbital vector, and to communicate with other network systems. The design is applicable to antennas and lasers.

A microcomputer interface for a digital audio processor-based data recording system.

PubMed

Croxton, T L; Stump, S J; Armstrong, W M

1987-10-01

An inexpensive interface is described that performs direct transfer of digitized data from the digital audio processor and video cassette recorder based data acquisition system designed by Bezanilla (1985, Biophys. J., 47:437-441) to an IBM PC/XT microcomputer. The FORTRAN callable software that drives this interface is capable of controlling the video cassette recorder and starting data collection immediately after recognition of a segment of previously collected data. This permits piecewise analysis of long intervals of data that would otherwise exceed the memory capability of the microcomputer.

The Surge of Micro-computers

NASA Astrophysics Data System (ADS)

Morita, Written By Ichiko; Matsumura, Translated By Tamiko

Libraries in the United States are now experiencing another phase of rapid change brought by the sudden invasion of micro-computers. Their versatility has made available not only capabilities for word processing and producing spread sheets but also introduced new approaches to large research libraries’ information networks. OCLC’s microenhancers are one example of what is now available. They can be used for retrospective conversion, provide instruction for the use of and function as front end terminals for large online catalogs. Various new ideas for the application of micro-computers will bring interesting developments in library automation.

Multitasking in a data acquisition system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larsen, J.E.

1980-01-01

Microprocessors and microcomputers have been employed widely in data acquisition applications due to low cost and the ease of adapting the microcomputer to changing or altered requirements. Multitasking offers ways of getting more performance from a microcomputer and also a means of designing a system which by its nature is easily changed to meet new requirements. The term multitasking is used to include definitions of multitasking and multiprogramming: multitasking-performing various related functions of the same job, e.g. data acquisition and data logging (recording); multiprogramming-performing possibly unrelated jobs concurrently.

A microcomputer interface for a digital audio processor-based data recording system.

PubMed Central

Croxton, T L; Stump, S J; Armstrong, W M

1987-01-01

An inexpensive interface is described that performs direct transfer of digitized data from the digital audio processor and video cassette recorder based data acquisition system designed by Bezanilla (1985, Biophys. J., 47:437-441) to an IBM PC/XT microcomputer. The FORTRAN callable software that drives this interface is capable of controlling the video cassette recorder and starting data collection immediately after recognition of a segment of previously collected data. This permits piecewise analysis of long intervals of data that would otherwise exceed the memory capability of the microcomputer. PMID:3676444

Reviews.

ERIC Educational Resources Information Center

Journal of Chemical Education, 1988

1988-01-01

Reviews three softwre packages: "Molecular Graphics on the Apple Microcomputer, Enhanced Version 2.0"; "Molecular Graphics on the IBM PC Microcomputer"; and "Molecular Animator, IBM PC Version." Packages are rated based on ease of use, subject matter content, pedagogic value, and student reaction. (CW)

Microcomputers! Applications to Physics Teaching.

ERIC Educational Resources Information Center

Tinker, Robert F.; Stringer, Gene A.

1978-01-01

Reviews the use of computers in various aspects of physics teaching. Introduces some basic hardware and software concepts and jargon. Illustrates these ideas using four vastly different microcomputers, with prices, to help in choosing the right educational computer system. (GA)

A Microcomputer-Based Computer Science Program.

ERIC Educational Resources Information Center

Compeau, Larry D.

1984-01-01

Examines the use of the microcomputer in computer science programs as an alternative to time-sharing computers at North Country Community College. Discusses factors contributing to the program's success, security problems, outside application possibilities, and program implementation concerns. (DMM)

Simple Interval Timers for Microcomputers.

ERIC Educational Resources Information Center

McInerney, M.; Burgess, G.

1985-01-01

Discusses simple interval timers for microcomputers, including (1) the Jiffy clock; (2) CPU count timers; (3) screen count timers; (4) light pen timers; and (5) chip timers. Also examines some of the general characteristics of all types of timers. (JN)

Micro-Computers in Biology Inquiry.

ERIC Educational Resources Information Center

Barnato, Carolyn; Barrett, Kathy

1981-01-01

Describes the modification of computer programs (BISON and POLLUT) to accommodate species and areas indigenous to the Pacific Coast area. Suggests that these programs, suitable for PET microcomputers, may foster a long-term, ongoing, inquiry-directed approach in biology. (DS)

Utilization of Educationally Oriented Microcomputer Based Laboratories

ERIC Educational Resources Information Center

Fitzpatrick, Michael J.; Howard, James A.

1977-01-01

Describes one approach to supplying engineering and computer science educators with an economical portable digital systems laboratory centered around microprocessors. Expansion of the microcomputer based laboratory concept to include Learning Resource Aided Instruction (LRAI) systems is explored. (Author)

Microcomputers in Libraries.

ERIC Educational Resources Information Center

Ertel, Monica M.

1984-01-01

This discussion of current microcomputer technologies available to libraries focuses on software applications in four major classifications: communications (online database searching); word processing; administration; and database management systems. Specific examples of library applications are given and six references are cited. (EJS)

Troubleshooting: Dealing with a Misbehaving Apple.

ERIC Educational Resources Information Center

Scott, Patrick B.; Howell, Richard D.

1984-01-01

Presents troubleshooting suggestions specifically intended for the Apple II microcomputer which have been developed from experiences working with children and pre- and inservice teachers. Guidelines for diagnosing problems focus on the mechanical functions of the microcomputer hardware. (MBR)

A Home Computer Primer.

ERIC Educational Resources Information Center

Stone, Antonia

1982-01-01

Provides general information on currently available microcomputers, computer programs (software), hardware requirements, software sources, costs, computer games, and programing. Includes a list of popular microcomputers, providing price category, model, list price, software (cassette, tape, disk), monitor specifications, amount of random access…

Performance analysis of microcomputer based differential protection of UHV lines under selective phase switching

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhatti, A.A.

1990-04-01

This paper examines the effects of primary and secondary fault quantities as well s of mutual couplings of neighboring circuits on the sensitivity of operation and threshold settings of a microcomputer based differential protection of UHV lines under selective phase switching. Microcomputer based selective phase switching allows the disconnection of minimum number of phases involved in a fault and requires the autoreclosing of these phases immediately after the extinction of secondary arc. During a primary fault a heavy current contribution to the healthy phases tends to cause an unwanted tripping. Faulty phases physically disconnected constitute an isolated fault which beingmore » coupled to the system affects the current and voltage levels of the healthy phases still retained in the system and may cause an unwanted tripping. The microcomputer based differential protection, appears to have poor performance when applied to uncompensated lines employing selective pole switching.« less

Microcomputer control of infrared detector arrays used in direct imaging and in Fabry-Perot spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rossano, G.S.

1989-02-01

A microcomputer based data acquisition system has been developed for astronomical observing with two-dimensional infrared detector arrays operating at high pixel rates. The system is based on a 16-bit 8086/8087 microcomputer operating at 10 MHz. Data rates of up to 560,000 pixels/sec from arrays of up to 4096 elements are supported using the microcomputer system alone. A hardware co-adder the authors are developing permits data accumulation at rates of up to 1.67 million pixels/sec in both staring and chopped data acquisition modes. The system has been used for direct imaging and for data acquisition in a Fabry-Perot Spectrometer developed bymore » NRL. The hardware is operated using interactive software which supports the several available modes of data acquisition, and permits data display and reduction during observing sessions.« less

Application of a microcomputer-based system to control and monitor bacterial growth.

PubMed

Titus, J A; Luli, G W; Dekleva, M L; Strohl, W R

1984-02-01

A modular microcomputer-based system was developed to control and monitor various modes of bacterial growth. The control system was composed of an Apple II Plus microcomputer with 64-kilobyte random-access memory; a Cyborg ISAAC model 91A multichannel analog-to-digital and digital-to-analog converter; paired MRR-1 pH, pO(2), and foam control units; and in-house-designed relay, servo control, and turbidimetry systems. To demonstrate the flexibility of the system, we grew bacteria under various computer-controlled and monitored modes of growth, including batch, turbidostat, and chemostat systems. The Apple-ISAAC system was programmed in Labsoft BASIC (extended Applesoft) with an average control program using ca. 6 to 8 kilobytes of memory and up to 30 kilobytes for datum arrays. This modular microcomputer-based control system was easily coupled to laboratory scale fermentors for a variety of fermentations.

Application of a Microcomputer-Based System to Control and Monitor Bacterial Growth

PubMed Central

Titus, Jeffrey A.; Luli, Gregory W.; Dekleva, Michael L.; Strohl, William R.

1984-01-01

A modular microcomputer-based system was developed to control and monitor various modes of bacterial growth. The control system was composed of an Apple II Plus microcomputer with 64-kilobyte random-access memory; a Cyborg ISAAC model 91A multichannel analog-to-digital and digital-to-analog converter; paired MRR-1 pH, pO2, and foam control units; and in-house-designed relay, servo control, and turbidimetry systems. To demonstrate the flexibility of the system, we grew bacteria under various computer-controlled and monitored modes of growth, including batch, turbidostat, and chemostat systems. The Apple-ISAAC system was programmed in Labsoft BASIC (extended Applesoft) with an average control program using ca. 6 to 8 kilobytes of memory and up to 30 kilobytes for datum arrays. This modular microcomputer-based control system was easily coupled to laboratory scale fermentors for a variety of fermentations. PMID:16346462

Microcomputers and the future of epidemiology.

PubMed Central

Dean, A G

1994-01-01

The Workshop on Microcomputers and the Future of Epidemiology was held March 8-9, 1993, at the Turner Conference Center, Atlanta, GA, with 130 public health professionals participating. The purpose of the workshop was to define microcomputer needs in epidemiology and to propose future initiatives. Thirteen groups representing public health disciplines defined their needs for better and more useful data, development of computer technology appropriate to epidemiology, user support and human infrastructure development, and global communication and planning. Initiatives proposed were demonstration of health surveillance systems, new software and hardware, computer-based training, projects to establish or improve data bases and community access to data bases, improved international communication, conferences on microcomputer use in particular disciplines, a suggestion to encourage competition in the production of public-domain software, and longrange global planning for epidemiologic computing and data management. Other interested groups are urged to study, modify, and implement those ideas. PMID:7910692

Using Taxonomic Indexing Trees to Efficiently Retrieve SCORM-Compliant Documents in e-Learning Grids

ERIC Educational Resources Information Center

Shih, Wen-Chung; Tseng, Shian-Shyong; Yang, Chao-Tung

2008-01-01

With the flourishing development of e-Learning, more and more SCORM-compliant teaching materials are developed by institutes and individuals in different sites. In addition, the e-Learning grid is emerging as an infrastructure to enhance traditional e-Learning systems. Therefore, information retrieval schemes supporting SCORM-compliant documents…

Training Children with Autism Spectrum Disorders to Be Compliant with an Oral Assessment

ERIC Educational Resources Information Center

Cuvo, Anthony J.; Godard, Anna; Huckfeldt, Rachel; DeMattei, Ronda

2010-01-01

Little research has been conducted on teaching children with autism spectrum disorders to be compliant with dental procedures. This study evaluated a behavioral package to train children with autism spectrum disorders to be compliant with an 8 component oral assessment. After a dental hygienist performed an assessment pretest, noncompliance on…

Power bases and attribution in three cultures.

PubMed

Alanazi, Falah M; Rodrigues, Aroldo

2003-06-01

The authors used a Saudi context to verify the cross-cultural generality of findings (A. Rodrigues & K. L. Lloyd, 1998) reported for U.S. and Brazilian samples in which compliant behavior caused by reward, informational, and referent influences was perceived as more controllable and more internal than compliant behavior resulting from legitimate, expert, and coercive influences. This differential attribution led, in turn, to different affective and behavioral responses. In the present study, cognitive and affective reactions of Saudi students were measured with regard to compliant behavior (leading to a good outcome or a bad outcome) caused by each of the 6 bases of power described by B. H. Raven (1965). As expected, power bases had significant effects. However, when the outcome of the compliant behavior was bad, compliant behavior caused by a coercive influence led to the perception of more internality and controllability. Also--and not found in previous studies--the perception of less internality and controllability of compliant behavior was caused by an informational influence. Findings are discussed in the light of related research and Saudi cultural characteristics.

Herd protection effect of N95 respirators in healthcare workers.

PubMed

Chen, Xin; Chughtai, Abrar Ahmad; MacIntyre, Chandini Raina

2017-12-01

Objective To determine if there was herd protection conferred to unprotected healthcare workers (HCWs) by N95 respirators worn by colleagues. Methods Data were analysed from a prospective cluster randomized clinical trial conducted in Beijing, China between 1 December 2008 and 15 January 2009. A minimum compliance level (MCL) of N95 respirators for prevention of clinical respiratory illness (CRI) was set based on various compliance cut-offs. The CRI rates were compared between compliant (≥MCL) and non-compliant (

Systems and Methods for Implementing Bulk Metallic Glass-Based Macroscale Compliant Mechanisms

NASA Technical Reports Server (NTRS)

Hofmann, Douglas C. (Inventor); Agnes, Gregory (Inventor)

2017-01-01

Systems and methods in accordance with embodiments of the invention implement bulk metallic glass-based macroscale compliant mechanisms. In one embodiment, a bulk metallic glass-based macroscale compliant mechanism includes: a flexible member that is strained during the normal operation of the compliant mechanism; where the flexible member has a thickness of 0.5 mm; where the flexible member comprises a bulk metallic glass-based material; and where the bulk metallic glass-based material can survive a fatigue test that includes 1000 cycles under a bending loading mode at an applied stress to ultimate strength ratio of 0.25.

Using Microcomputers to Teach Non-Linear Equations at Sixth Form Level.

ERIC Educational Resources Information Center

Cheung, Y. L.

1984-01-01

Promotes the use of the microcomputer in mathematics instruction, reviewing approaches to teaching nonlinear equations. Examples of computer diagrams are illustrated and compared to textbook samples. An example of a problem-solving program is included. (ML)

Storage Media for Microcomputers.

ERIC Educational Resources Information Center

Trautman, Rodes

1983-01-01

Reviews computer storage devices designed to provide additional memory for microcomputers--chips, floppy disks, hard disks, optical disks--and describes how secondary storage is used (file transfer, formatting, ingredients of incompatibility); disk/controller/software triplet; magnetic tape backup; storage volatility; disk emulator; and…

Evaluating Microcomputer Access Technology for Use by Visually Impaired Students.

ERIC Educational Resources Information Center

Ruconich, Sandra

1984-01-01

The article outlines advantages and limitations of five types of access to microcomputer technology for visually impaired students: electronic braille, paper braille, Optacon, synthetic speech, and enlarged print. Additional considerations in access decisions are noted. (CL)

Ten Commandments for Microcomputer Facility Planners.

ERIC Educational Resources Information Center

Espinosa, Leonard J.

1991-01-01

Presents factors involved in designing a microcomputer facility, including how computers will be used in the instructional program; educational specifications; planning committees; user input; quality of purchases; visual supervision considerations; location; workstation design; turnkey systems; electrical requirements; local area networks;…

Microcomputers in Libraries: The Quiet Revolution.

ERIC Educational Resources Information Center

Boss, Richard

1985-01-01

This article defines three separate categories of microcomputers--personal, desk-top, multi-user devices--and relates storage capabilities (expandability, floppy disks) to library applications. Highlghts include de facto standards, operating systems, database management systems, applications software, circulation control systems, dumb and…

The artificial satellite observation chronograph controlled by single chip microcomputer.

NASA Astrophysics Data System (ADS)

Pan, Guangrong; Tan, Jufan; Ding, Yuanjun

1991-06-01

The instrument specifications, hardware structure, software design, and other characteristics of the chronograph mounting on a theodolite used for artificial satellite observation are presented. The instrument is a real time control system with a single chip microcomputer.

Using the Apple II as a Laboratory Instrument.

ERIC Educational Resources Information Center

De Jong, Marvin L.; Layman, John W.

1984-01-01

Discusses using Apple II microcomputers for measuring resistance, temperature, and light intensity. Also discusses digital input and output and timing techniques. Although focusing on Apple II, the circuits and programs described may be applicable to other microcomputers. (JN)

The Microcomputer and School Transportation.

ERIC Educational Resources Information Center

Dembowski, Frederick L.

1984-01-01

Microcomputers have many cost- and time-saving uses in school transportation management. Applications include routing and scheduling, demographic analysis, fleet maintenance, and personnel and contract management. Word processing is especially promising for storing and updating documents like specifications. Enrollment forecasting and inventory…

Assessing Functional Vision Using Microcomputers.

ERIC Educational Resources Information Center

Spencer, Simon; Ross, Malcolm

1989-01-01

The paper describes a software system which uses microcomputers to aid in the assessment of functional vision in visually impaired students. The software also aims to be visually stimulating and to develop hand-eye coordination, visual memory, and cognitive abilities. (DB)

Modeling Steady-State Groundwater Flow Using Microcomputer Spreadsheets.

ERIC Educational Resources Information Center

Ousey, John Russell, Jr.

1986-01-01

Describes how microcomputer spreadsheets are easily adapted for use in groundwater modeling. Presents spreadsheet set-ups and the results of five groundwater models. Suggests that this approach can provide a basis for demonstrations, laboratory exercises, and student projects. (ML)

Applications of Microcomputers in the Teaching of Physics 6502 Software.

ERIC Educational Resources Information Center

Marsh, David P.

1980-01-01

Described is a variety of uses of the microcomputer when coupled with software available for systems using 6502 microprocessors. Included are several computer programs which exhibit some of the possibilities for programing the 6502 microprocessors. (DS)

Executive Summaries: CIL '90.

ERIC Educational Resources Information Center

Elsweiler, John A., Jr.; And Others

1990-01-01

Presents summaries of 12 papers presented at the 1990 Computers in Libraries Conference. Topics discussed include online searching; microcomputer-based serials management; microcomputer-based workstations; online public access catalogs (OPACs); multitype library networking; CD-ROM searches; locally mounted online databases; collection evaluation;…

Development Communication Report. No. 47, Autumn 1984.

ERIC Educational Resources Information Center

Development Communication Report, 1984

1984-01-01

This newsletter describes development projects that utilize varied media, including microcomputers, videotape, and print materials, and discusses development communications issues. Specific articles are as follows: "Microcomputers for Education in the Developing World" (Kurt D. Moses); "Social Marketing: Two Views, Two…

Proceedings of Denver GeoTech '92

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, C.A.

1992-01-01

This book contains proceedings of Denver Geo Tech '92. Topics covered include: practical ways to use microcomputers and workstations in geology, geophysics, environmental concerns, petroleum engineering, mining, hydrogeology, reclamation, microcomputers, state-of-the-art information on computer hardware, software, and services.

Microcomputers in Business: How Are They Being Used?

ERIC Educational Resources Information Center

Bartholome, Lloyd W.; Dockter, DuWayne Lee

1984-01-01

Ninety-one Utah business firms responded to a survey ranking current and future microcomputer applications. Predominant current uses are for file management and accounting. These two, as well as word processing, were identified as important future applications. (SK)

Model Rockets and Microchips.

ERIC Educational Resources Information Center

Fitzsimmons, Charles P.

1986-01-01

Points out the instructional applications and program possibilities of a unit on model rocketry. Describes the ways that microcomputers can assist in model rocket design and in problem calculations. Provides a descriptive listing of model rocket software for the Apple II microcomputer. (ML)

Microcomputer software for storm drain hydraulic gradeline computation.

DOT National Transportation Integrated Search

1987-01-01

A microcomputer software module was developed for the computation of hydraulic gradeline in storm sewer systems. The computer module has been attached to the program '"HYDRA", which is being adopted by the FHWA organized Pooled Fund Study. on Integra...

Microcomputer Calculated Diagnostic X-Ray Exposure Factors: Clinical Evaluation

PubMed Central

Markivee, C. R.; Edwards, F. Marc; Leonard, Patricia

1981-01-01

Calculation of correct settings for the controls of a diagnostic x-ray machine was established as feasible in a microcomputer with 4K memory. The cost effectiveness and other findings in the application of this method are discussed.

Environmentally Compliant Coating Remover Evaluation

DTIC Science & Technology

2012-08-30

22 9 Total of 491 products evaluated 7 Background • Many DoD depainting operations currently use environmentally compliant peroxide -assisted... benzyl alcohol strippers • These strippers have acceptable coating removal rates with minimal physical damage to metallic substrates • However, several...Coatings • Environmentally compliant benzyl alcohol product • Passed corrosion testing conducted by SMI in 2011 11 Laboratory Testing Scope

External Hand Forces Exerted by Long-Term Care Staff to Push Floor-Based Lifts: Effects of Flooring System and Resident Weight.

PubMed

Lachance, Chantelle C; Korall, Alexandra M B; Russell, Colin M; Feldman, Fabio; Robinovitch, Stephen N; Mackey, Dawn C

2016-09-01

The aim of this study was to investigate the effects of flooring type and resident weight on external hand forces required to push floor-based lifts in long-term care (LTC). Novel compliant flooring is designed to reduce fall-related injuries among LTC residents but may increase forces required for staff to perform pushing tasks. A motorized lift may offset the effect of flooring on push forces. Fourteen female LTC staff performed straight-line pushes with two floor-based lifts (conventional, motor driven) loaded with passengers of average and 90th-percentile resident weights over four flooring systems (concrete+vinyl, compliant+vinyl, concrete+carpet, compliant+carpet). Initial and sustained push forces were measured by a handlebar-mounted triaxial load cell and compared to participant-specific tolerance limits. Participants rated pushing difficulty. Novel compliant flooring increased initial and sustained push forces and subjective ratings compared to concrete flooring. Compared to the conventional lift, the motor-driven lift substantially reduced initial and sustained push forces and perceived difficulty of pushing for all four floors and both resident weights. Participants exerted forces above published tolerance limits only when using the conventional lift on the carpet conditions (concrete+carpet, compliant+carpet). With the motor-driven lift only, resident weight did not affect push forces. Novel compliant flooring increased linear push forces generated by LTC staff using floor-based lifts, but forces did not exceed tolerance limits when pushing over compliant+vinyl. The motor-driven lift substantially reduced push forces compared to the conventional lift. Results may help to address risk of work-related musculoskeletal injury, especially in locations with novel compliant flooring. © 2016, Human Factors and Ergonomics Society.

Impact of Compliance on Dysphagia Rehabilitation in Head and Neck Cancer Patients – Results from a Multi-center Clinical Trial

PubMed Central

Krisciunas, Gintas P.; McCulloch, Timothy M.; Lazarus, Cathy L.; Pauloski, Barbara R.; Meyer, Tanya K.; Graner, Darlene; Van Daele, Douglas J.; Silbergleit, Alice K.; Crujido, Lisa R.; Rybin, Denis; Doros, Gheorghe; Kotz, Tamar; Langmore, Susan E.

2016-01-01

Purpose A 5yr, 16 site, randomized controlled trial enrolled 170 HNC survivors into active (estim + swallow exercise) or control (sham estim + swallowing exercise) arms. Primary analyses showed that estim did not enhance swallowing exercises. This secondary analysis determined if/how patient compliance impacted outcomes. Methods A home program, performed 2×/day, 6d/wk, for 12wks included stretches and 60 swallows paired with real or sham estim. Regular clinic visits ensured proper exercise execution and detailed therapy checklists tracked patient compliance which was defined by mean number of sessions performed per week (0-12 times) over the 12wk intervention period. “Compliant” was defined as performing 10-12 sessions/wk. Outcomes were change in PAS, HNCI, PSS, OPSE, and hyoid excursion. ANCOVA analyses determined if outcomes differed between real/sham and compliant/noncompliant groups after 12wks of therapy. Results Of the 170 patients enrolled, 153 patients had compliance data. The mean number of sessions performed was 8.57/wk (median=10.25). Fifty four percent of patients (n=83) were considered “compliant”. After 12wks of therapy, compliant patients in the sham estim group realized significantly better PAS scores than compliant patients in the active estim group (p=0.0074). When pooling all patients together, there were no significant differences in outcomes between compliant and non-compliant patients. Conclusions The addition of estim to swallowing exercises resulted in worse swallowing outcomes than exercises alone, which was more pronounced in compliant patients. Since neither compliant nor non-compliant patients benefitted from swallowing exercises, the proper dose and/or efficacy of swallowing exercises must also be questioned in this patient population. PMID:27848021

Compliance with gastric cancer guidelines is associated with improved outcomes.

PubMed

Worhunsky, David J; Ma, Yifei; Zak, Yulia; Poultsides, George A; Norton, Jeffrey A; Rhoads, Kim F; Visser, Brendan C

2015-03-01

Limited data are available on the implementation and effectiveness of NCCN Clinical Practice Guidelines in Oncology (NCCN Guidelines) for Gastric Cancer. We sought to assess rates of compliance with NCCN Guidelines, specifically stage-specific therapy during the initial episode of care, and to determine its impact on outcomes. The California Cancer Registry was used to identify cases of gastric cancer from 2001 to 2006. Logistic regression and Cox proportional hazard models were used to predict guideline compliance and the adjusted hazard ratio for mortality. Patients with TNM staging or summary stage (SS) were also analyzed separately. Compliance with NCCN Guidelines occurred in just 45.5% of patients overall. Patients older than 55 years were less likely to receive guideline-compliant care, and compliance was associated with a median survival of 20 versus 7 months for noncompliant care (P<.001). Compliant care was also associated with a 55% decreased hazard of mortality (P<.001). Further analysis revealed that 50% of patients had complete TNM staging versus an SS, and TNM-staged patients were more likely to receive compliant care (odds ratio, 1.59; P<.001). TNM-staged patients receiving compliant care had a median survival of 25.3 months compared with 15.1 months for compliant SS patients. Compliance with NCCN Guidelines and stage-specific therapy at presentation for the treatment of patients with gastric cancer was poor, which was a significant finding given that compliant care was associated with a 55% reduction in the hazard of death. Additionally, patients with TNM-staged cancer were more likely to receive compliant care, perhaps a result of having received more intensive therapy. Combined with the improved survival among compliant TNM-staged patients, these differences have meaningful implications for health services research. Copyright © 2015 by the National Comprehensive Cancer Network.

EmerLoc: location-based services for emergency medical incidents.

PubMed

Maglogiannis, I; Hadjiefthymiades, S

2007-10-01

Recent developments in positioning systems and telecommunications have provided the technology needed for the development of location aware medical applications. We developed a system, named EmerLoc, which is based upon this technology and uses a set of sensors that are attached to the patient's body, a micro-computing unit which is responsible for processing the sensor readings and a central monitoring unit, which coordinates the data flow. To demonstrate that the proposed system is technically feasible and acceptable for the potential users. Transmission speed is assessed mostly by means of transmission of DICOM compliant images in various operational scenarios. The positioning functionality was established both outdoor using GPS and indoor using the UCLA Nibble system. User acceptability was assessed in a hospital setting by 15 physicians who filled in a questionnaire after having used the system in an experimental setting. Transmission speeds ranged from 88kB/s for a IEEE 802.11 infrastructure to 2.5kB/s for a GSM/GPRS scenario. Positioning accuracy based on GPS was 5-10m. The physicians rated the technical aspects on average above 3 on a 5-point scale. Only the data presentation was assessed to be not satisfactory (2.81 on a 5-point scale). The reported results prove the feasibility of the proposed architecture and its alignment with widely established practices and standards, while the reaction of potential users who evaluated the system is quite positive.

Microcomputer Software for Libraries: A Survey.

ERIC Educational Resources Information Center

Nolan, Jeanne M.

1983-01-01

Reports on findings of research done by Nolan Information Management Services concerning availability of microcomputer software for libraries. Highlights include software categories (specific, generic-database management programs, original); number of programs available in 1982 for 12 applications; projections for 1983; and future software…

Making Microcomputers Accessible to Blind Persons.

ERIC Educational Resources Information Center

Ruconich, Sandra K.; And Others

1986-01-01

The article considers advantages and limitations of tactile, auditory, and visual means of microcomputer access for blind students. Discussed are electronic braille, paper braille, the Optacon, synthesized speech, and enlarged print. Improved multimedia access technology is predicted for the future. (Author/DB)

Troubleshooting Micro's.

ERIC Educational Resources Information Center

Black, B. R.

This guide provides instructions for preventive maintenance and for making minor technical adjustments on microcomputers. General hints are provided for all microcomputers concerning static electricity reduction; use of dust covers; heat, magnetic fields, and floppy disks; and the use of halogen fire extinguishers. These are followed by…

The development of the time-keeping clock with TS-1 single chip microcomputer.

NASA Astrophysics Data System (ADS)

Zhou, Jiguang; Li, Yongan

The authors have developed a time-keeping clock with Intel 8751 single chip microcomputer that has been successfully used in time-keeping station. The hard-soft ware design and performance of the clock are introduced.

Microcomputing.

ERIC Educational Resources Information Center

Beiser, Karl

1986-01-01

Describes a product--BiblioFile, Library Corporation's catalog production system--and a service--reproduction of public domain software on CD-ROM for sale to those interested--which revolve around the ultra-high-density storage capacity of CD-ROM discs. Criteria for selecting microcomputers are briefly reviewed. (MBR)

Reinforcement and Drill by Microcomputer.

ERIC Educational Resources Information Center

Balajthy, Ernest

1984-01-01

Points out why drill work has a role in the language arts classroom, explores the possibilities of using a microcomputer to give children drill work, and discusses the characteristics of a good software program, along with faults found in many software programs. (FL)

Microcomputer Decisions for the 1990s [and] Apple's Macintosh: A Viable Choice.

ERIC Educational Resources Information Center

Grosch, Audrey N.

1989-01-01

Discussion of the factors that should be considered when purchasing or upgrading a microcomputer focuses on the MS-DOS and OS/2 operating systems. Macintosh purchasing decisions are discussed in a sidebar. A glossary is provided. (CLB)

Getting Ready for Micros.

ERIC Educational Resources Information Center

Roth, Gene L.; And Others

1984-01-01

Four colleagues at Idaho State University describe how they used the DACUM (Developing A Curriculum) process to figure out what microcomputer competencies vocational educators need. Competencies include developing a personal plan for microcomputer competency; integrating computer-based instruction (CBI) into the vocational curriculum; planning,…

Briefing: Microprocessors.

ERIC Educational Resources Information Center

Standing, Roy A.

1982-01-01

Reviews the basic concepts and technology behind the functions computers perform, describes the miniaturization of computer components, discusses the development of the microprocessor and the microcomputer, and makes projections concerning the future of the microcomputer market. Information is provided on the features, costs, and manufacturers of…

Educational Software Acquisition for Microcomputers.

ERIC Educational Resources Information Center

Erikson, Warren; Turban, Efraim

1985-01-01

Examination of issues involved in acquiring appropriate microcomputer software for higher education focuses on the following points: developing your own software; finding commercially available software; using published evaluations; pre-purchase testing; customizing and adapting commercial software; post-purchase testing; and software use. A…

Microcomputer Applications in Interaction Analysis.

ERIC Educational Resources Information Center

Wadham, Rex A.

The Timed Interval Categorical Observation Recorder (TICOR), a portable, battery powered microcomputer designed to automate the collection of sequential and simultaneous behavioral observations and their associated durations, was developed to overcome problems in gathering subtle interaction analysis data characterized by sequential flow of…

Microcomputer-Based Programs for Pharmacokinetic Simulations.

ERIC Educational Resources Information Center

Li, Ronald C.; And Others

1995-01-01

Microcomputer software that simulates drug-concentration time profiles based on user-assigned pharmacokinetic parameters such as central volume of distribution, elimination rate constant, absorption rate constant, dosing regimens, and compartmental transfer rate constants is described. The software is recommended for use in undergraduate…

Using Microcomputers to Manage Grants.

ERIC Educational Resources Information Center

Joseph, Jonathan L.; And Others

1982-01-01

Features of microcomputer systems and software that can be useful in administration of research grants are outlined, including immediacy of reporting, flexibility, accurate balance availability, useful coding, accurate payroll control, and forecasting capabilities. These are contrasted with the less flexible centralized computer operation. (MSE)

Microcomputers in the Introductory Laboratory.

ERIC Educational Resources Information Center

Bare, John K.

1982-01-01

A microcomputer was used successfully to replicate Sternberg's 1966 study of retrieval from short-term memory and Sperling's 1960 study on sensory or iconic memory. Computers with a capacity for measuring reaction time are useful in the laboratory for introductory psychology courses. (SR)

Micros for the 1990's: An Update.

ERIC Educational Resources Information Center

Grosch, Audrey N.

1991-01-01

Discusses new hardware and software developments for microcomputers and considers strategies for future library microcomputing. Topics discussed include developments with Macintosh computers; the importance of local area networks (LANs); upgrading options for hardware; operating system upgrades; dynamic data exchange (DDE); microcomputer…

A microcomputer-based whole-body counter for personnel routine monitoring.

PubMed

Chou, H P; Tsai, T M; Lan, C Y

1993-05-01

The paper describes a cost-effective NaI(Tl) whole-body counter developed for routine examinations of worker intakes at an isotope production facility. Signal processing, data analysis and system operation are microcomputer-controlled for minimum human interactions. The pulse height analyzer is developed as an microcomputer add-on card for easy manipulation. The scheme for radionuclide analysis is aimed for fast running according to a knowledge base established from background samples and phantom experiments in conjunction with a multivariate regression analysis. Long-term stability and calibration with standards and in vivo measurements are reported.

Trench fast reactor design using the microcomputer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rohach, A.F.; Sankoorikal, J.T.; Schmidt, R.R.

1987-01-01

This project is a study of alternative liquid-metal-cooled fast power reactor system concepts. Specifically, an unconventional primary system is being conceptually designed and evaluated. The project design is based primarily on microcomputer analysis through the use of computational modules. The reactor system concept is a long, narrow pool with a long, narrow reactor called a trench-type pool reactor in it. The reactor consists of five core-blanket modules in a line. Specific power is to be modest, permitting long fuel residence time. Two fuel cycles are currently being considered. The reactor design philosophy is that of the inherently safe concept. Thismore » requires transient analysis dependent on reactivity coefficients: prompt fuel, including Doppler and expansion, fuel expansion, sodium temperature and void, and core expansion. Conceptual reactor design is done on a microcomputer. A part of the trench reactor project is to develop a microcomputer-based system that can be used by the user for scoping studies and design. Current development includes the neutronics and fuel management aspects of the design. Thermal-hydraulic analysis and economics are currently being incorporated into the microcomputer system. The system is menu-driven including preparation of program input data and of output data for displays in graphics form.« less

Development of a microcomputer data base of manufacturing, installation, and operating experience for the NSSS designer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borchers, W.A.; Markowski, E.S.

1986-01-01

Future nuclear steam supply systems (NSSSs) will be designed in an environment of powerful micro hardware and software and these systems will be linked by local area networks (LAN). With such systems, individual NSSS designers and design groups will establish and maintain local data bases to replace existing manual files and data sources. One such effort of this type in Combustion Engineering's (C-E's) NSSS engineering organization is the establishment of a data base of historical manufacturing, installation, and operating experience to provide designers with information to improve on current designs and practices. In contrast to large mainframe or minicomputer datamore » bases, which compile industry-wide data, the data base described here is implemented on a microcomputer, is design specific, and contains a level of detail that is of interest to system and component designers. DBASE III, a popular microcomputer data base management software package, is used. In addition to the immediate benefits provided by the data base, the development itself provided a vehicle for identifying procedural and control aspects that need to be addressed in the environment of local microcomputer data bases. This paper describes the data base and provides some observations on the development, use, and control of local microcomputer data bases in a design organization.« less

Generalized constitutive equations for piezo-actuated compliant mechanism

NASA Astrophysics Data System (ADS)

Cao, Junyi; Ling, Mingxiang; Inman, Daniel J.; Lin, Jin

2016-09-01

This paper formulates analytical models to describe the static displacement and force interactions between generic serial-parallel compliant mechanisms and their loads by employing the matrix method. In keeping with the familiar piezoelectric constitutive equations, the generalized constitutive equations of compliant mechanism represent the input-output displacement and force relations in the form of a generalized Hooke’s law and as analytical functions of physical parameters. Also significantly, a new model of output displacement for compliant mechanism interacting with piezo-stacks and elastic loads is deduced based on the generalized constitutive equations. Some original findings differing from the well-known constitutive performance of piezo-stacks are also given. The feasibility of the proposed models is confirmed by finite element analysis and by experiments under various elastic loads. The analytical models can be an insightful tool for predicting and optimizing the performance of a wide class of compliant mechanisms that simultaneously consider the influence of loads and piezo-stacks.

POSIX and Object Distributed Storage Systems Performance Comparison Studies With Real-Life Scenarios in an Experimental Data Taking Context Leveraging OpenStack Swift & Ceph

NASA Astrophysics Data System (ADS)

Poat, M. D.; Lauret, J.; Betts, W.

2015-12-01

The STAR online computing infrastructure has become an intensive dynamic system used for first-hand data collection and analysis resulting in a dense collection of data output. As we have transitioned to our current state, inefficient, limited storage systems have become an impediment to fast feedback to online shift crews. Motivation for a centrally accessible, scalable and redundant distributed storage system had become a necessity in this environment. OpenStack Swift Object Storage and Ceph Object Storage are two eye-opening technologies as community use and development have led to success elsewhere. In this contribution, OpenStack Swift and Ceph have been put to the test with single and parallel I/O tests, emulating real world scenarios for data processing and workflows. The Ceph file system storage, offering a POSIX compliant file system mounted similarly to an NFS share was of particular interest as it aligned with our requirements and was retained as our solution. I/O performance tests were run against the Ceph POSIX file system and have presented surprising results indicating true potential for fast I/O and reliability. STAR'S online compute farm historical use has been for job submission and first hand data analysis. The goal of reusing the online compute farm to maintain a storage cluster and job submission will be an efficient use of the current infrastructure.

Connections for solid oxide fuel cells

DOEpatents

Collie, Jeffrey C.

1999-01-01

A connection for fuel cell assemblies is disclosed. The connection includes compliant members connected to individual fuel cells and a rigid member connected to the compliant members. Adjacent bundles or modules of fuel cells are connected together by mechanically joining their rigid members. The compliant/rigid connection permits construction of generator fuel cell stacks from basic modular groups of cells of any desired size. The connections can be made prior to installation of the fuel cells in a generator, thereby eliminating the need for in-situ completion of the connections. In addition to allowing pre-fabrication, the compliant/rigid connections also simplify removal and replacement of sections of a generator fuel cell stack.

Verification of drag-reduction capabilities of stiff compliant coatings in air flow at moderate speeds

NASA Astrophysics Data System (ADS)

Boiko, Andrey V.; Kulik, Victor M.; Chun, Ho-Hwan; Lee, Inwon

2011-12-01

Skin frictional drag reduction efficiency of "stiff" compliant coating was investigated in a wind tunnel experiment. Flat plate compliant coating inserts were installed in a wind tunnel and the measurements of skin frictional drag and velocity field were carried out. The compliant coatings with varying viscoelastic properties had been prepared using different composition. In order to optimize the coating thickness, the most important design parameter, the dynamic viscoelastic properties had been determined experimentally. The aging of the materials (variation of their properties) during half a year was documented as well. A design procedure proposed by Kulik et al. (2008) was applied to get an optimal value for the coating thickness. Along with the drag measurement using the strain balance, velocity and pressure were measured for different coatings. The compliant coatings with the thickness h = 7mm achieved 4~5% drag reduction within a velocity range 30~40 m/s. The drag reduction mechanism of the attenuation of turbulence velocity fluctuations due to the compliant coating was demonstrated. It is envisioned that larger drag reduction effect is obtainable at higher flow velocities for high speed trains and subsonic aircrafts.

Stiffness modeling of compliant parallel mechanisms and applications in the performance analysis of a decoupled parallel compliant stage

NASA Astrophysics Data System (ADS)

Jiang, Yao; Li, Tie-Min; Wang, Li-Ping

2015-09-01

This paper investigates the stiffness modeling of compliant parallel mechanism (CPM) based on the matrix method. First, the general compliance matrix of a serial flexure chain is derived. The stiffness modeling of CPMs is next discussed in detail, considering the relative positions of the applied load and the selected displacement output point. The derived stiffness models have simple and explicit forms, and the input, output, and coupling stiffness matrices of the CPM can easily be obtained. The proposed analytical model is applied to the stiffness modeling and performance analysis of an XY parallel compliant stage with input and output decoupling characteristics. Then, the key geometrical parameters of the stage are optimized to obtain the minimum input decoupling degree. Finally, a prototype of the compliant stage is developed and its input axial stiffness, coupling characteristics, positioning resolution, and circular contouring performance are tested. The results demonstrate the excellent performance of the compliant stage and verify the effectiveness of the proposed theoretical model. The general stiffness models provided in this paper will be helpful for performance analysis, especially in determining coupling characteristics, and the structure optimization of the CPM.

A new hybrid piezo-actuated compliant mechanism with self-tuned flexure arm

NASA Astrophysics Data System (ADS)

Ling, Mingxiang; Cao, Junyi

2017-04-01

Recent interests and demands for developing video-rate atomic force microscopes, high-throughput probe-based nanofabrication and high-frequency vibration generator for assisted-machining are increasingly posing new challenges for designing high-bandwidth and large-range piezo-actuated compliant mechanisms. The previous studies mainly focused on making the trade-off between natural frequency and motion range by designing a proper topology. Differing from the previous works, this paper attempts to break the deadlock by employing both piezo-stacks and piezoelectric patches to actuate compliant mechanisms. In this method, piezo-stacks provide an actuating force similar to the traditional way, while piezoelectric patches are bonded on the surface of the flexure arms in compliant mechanisms. These `active' laminaes are used to further actuate the hosting flexural beam by inducing strains on the interface and then give additional bending moments to the flexural arms, which enlarge the output displacement of the compliant mechanism while without the sacrifice of natural frequency. An analytical formulation is established to illustrate the new driving principle and the compound static behaviour of a specific hybrid piezo-actuated multistage compliant mechanism. Initial prototype is also manufactured and experimentally testing is conducted to verify the feasibility of the method.

Library-Specific Microcomputer Software.

ERIC Educational Resources Information Center

Levert, Virginia M.

1985-01-01

Discusses number and type of microcomputer software programs useful to libraries and types of hardware on which they run, as identified by Nolan Information Management Services. Highlights include general application programs, applications designed to support library technical processes, producers of library software, and choosing among options.…

Technology and Microcomputers for an Information Centre/Special Library.

ERIC Educational Resources Information Center

Daehn, Ralph M.

1984-01-01

Discusses use of microcomputer hardware and software, telecommunications methods, and advanced library methods to create a specialized information center's database of literature relating to farm machinery and food processing. Systems and services (electronic messaging, serials control, database creation, cataloging, collections, circulation,…

Special Report: Part One. New Tools for Professionals.

ERIC Educational Resources Information Center

Liskin, Miriam; And Others

1984-01-01

This collection of articles includes an examination of word-processing software; project management software; new expert systems that turn microcomputers into logical, well-informed consultants; simulated negotiation software; telephone management systems; and the physical design of an efficient microcomputer work space. (MBR)

Great Expectations: Distributed Financial Computing at Cornell.

ERIC Educational Resources Information Center

Schulden, Louise; Sidle, Clint

1988-01-01

The Cornell University Distributed Accounting (CUDA) system is an attempt to provide departments a software tool for better managing their finances, creating microcomputer standards, creating a vehicle for better administrative microcomputer support, and insuring local systems are consistent with central computer systems. (Author/MLW)

A Data Acquisition System Using Single-Chip Microcomputer

NASA Astrophysics Data System (ADS)

Yonyjiang, Dai; Jingkuan, Gao; Lin, Wan; Mingjia, Pi; Jingda, Nan

1989-12-01

A data acquisition system by single-chip microcomputer was designed. It is suitable to the future devlopment of the miniature tidar signal processing epuipment . The characteristics of frequecy response, SNR, D* and NEP of FM-CW CO2 coherent tidar were discussed.

Preparation of School District Budgets with Microcomputer Electronic Spreadsheets.

ERIC Educational Resources Information Center

Hinitz, Herman J.

1996-01-01

Preparing a microcomputer electronic spreadsheet containing all relevant school district budgetary information is possible with currently available hardware and software (such as Lotus 1-2-3), despite random-access-memory limitations. Spreadsheets can provide financial summaries, inventory-control listings, scheduling alternatives,…

Microcomputer Data Management in an Introductory Physics Laboratory.

ERIC Educational Resources Information Center

Chonacky, Norman

1982-01-01

Discusses the use of a microcomputer/mini-floppy disk system by physics students to store and analyze experimental data and exchange messages with the lab instructor. Also discusses other uses, in particular those fostering critical thinking and hypothetico-deductive reasoning. (Author/SK)

Microcomputer design and analysis of the cable catenary large space antenna system

NASA Technical Reports Server (NTRS)

Akle, W.

1984-01-01

The use of microcomputers in the design of a cable catenary large space antenna system is discussed. The development of a system design capability, data base utilization, systems integration, program structure and logic, and integrated graphics output are discussed.

Microcomputers: Tools for Developing Technological Literacy.

ERIC Educational Resources Information Center

Liao, Thomas T.

1983-01-01

Describes a course in which undergraduate students learn to program microcomputers while learning about its applications and ramifications. Descriptions of software developed for the course are also provided. These include yellow light (traffic flow), domestic electrical energy use/cost, water pollution, and supermarket automation. (CN)

The Microcomputer as an Administrative/Educational Tool in Education of the Hearing Impaired.

ERIC Educational Resources Information Center

Graham, Richard

1982-01-01

Administrative and instructional uses of microcomputers with hearing impaired students (infants to junior high level) are described. Uses include data storage and retrieval, maintenance of student history files, storage of test data, and vocabulary reinforcement for students. (CL)

The Use of a Microcomputer as an EKG Monitor.

ERIC Educational Resources Information Center

Walters, R. A.; Reynolds, R. F.

1983-01-01

Discusses the design and operation of a microcomputer system which obtains and displays an individual's electrocardiogram (EKG). The EKG information, in digital form, can be stored on a floppy disk and transmitted over telephone lines by use of a modem. (JN)

MicroSIFT Courseware Evaluations (1-87).

ERIC Educational Resources Information Center

Holznagel, Donald C., Ed.

A clearinghouse for information about microcomputer-based educational applications has been established at the Northwest Regional Educational Laboratory (NWREL). The clearinghouse, MicroSIFT (Microcomputer Software and Information for Teachers), is a central project of NWREL's Computer Technology Program. A primary concern has been the development…

Microcomputers and Preschoolers.

ERIC Educational Resources Information Center

Evans, Dina

Preschool children can benefit by working with microcomputers. Thinking skills are enhanced by software games that focus on logic, memory, problem solving, and pattern recognition. Counting, sequencing, and matching games develop mathematics skills, and word games focusing on basic letter symbol and word recognition develop language skills.…

Microcomputer Infusion Project: A Model.

ERIC Educational Resources Information Center

Rossberg, Stephen A.; Bitter, Gary G.

1988-01-01

Describes the Microcomputer Infusion Project (MIP), which was developed at Arizona State University to provide faculty with the necessary hardware, software, and training to become models of computer use in both lesson development and presentation for preservice teacher education students. Topics discussed include word processing; database…

Computer Training Helps Appalachians Compete.

ERIC Educational Resources Information Center

Newman, Anne

1984-01-01

Describes two computer literacy programs funded by the Appalachian Regional Commission, one using microcomputers to introduce computers to mathematics, science, and vocational education teachers in Mississippi, and the other using a statewide microcomputer network to train West Virginia vocational education students in word processing, spread…

Teaching Real Science with a Microcomputer.

ERIC Educational Resources Information Center

Naiman, Adeline

1983-01-01

Discusses various ways science can be taught using microcomputers, including simulations/games which allow large-scale or historic experiments to be replicated on a manageable scale in a brief time. Examples of several computer programs are also presented, including "Experiments in Human Physiology,""Health Awareness…

Implementation of an Intelligent Control System

DTIC Science & Technology

1992-05-01

there- fore implemented in a portable equipment rack. The controls computer consists of a microcomputer running a real time operating system , interface...circuit boards are mounted in an industry standard Multibus I chassis. The microcomputer runs the iRMX real time operating system . This operating system

Microcomputer Simulation of Nonlinear Systems: From Oscillations to Chaos.

ERIC Educational Resources Information Center

Raw, Cecil J. G.; Stacey, Larry M.

1989-01-01

Presents two short microcomputer programs which illustrate features of nonlinear dynamics, including steady states, periodic oscillations, period doubling, and chaos. Logistic maps are explained, inclusion in undergraduate chemistry and physics courses to teach nonlinear equations is discussed, and applications in social and biological sciences…

Microcomputers in Library Automation.

ERIC Educational Resources Information Center

Simpson, George A.

As librarians cope with reduced budgets, decreased staff, and increased demands for services, microcomputers will take a significant role in library automation by providing low-cost systems, solving specific library problems, and performing in distributed systems. This report presents an introduction to the technology of this low-cost, miniature…

Microcomputer Use in a Labor Studies Environment.

ERIC Educational Resources Information Center

Sorcinelli, Gino; Spencer, David C.

1987-01-01

Describes the development and classroom application of a microcomputer-assisted collective bargaining simulation by Indiana University's Division of Labor Studies. Student involvement in the simulation is described, instructional development techniques used in designing the simulation are discussed, and benefits of the simulation are reviewed.…

Teaching Comprehension-Monitoring with Microcomputers.

ERIC Educational Resources Information Center

Pitts, Murray M.; And Others

While it is widely recognized that comprehension monitoring is an important reading comprehension ability, effective methods for teaching readers to recognize and overcome various comprehension obstacles have not yet been conclusively identified. To determine if microcomputers could be used to teach students to overcome such obstacles, 41 fourth…

Microcomputers on Campus.

ERIC Educational Resources Information Center

Schimizzi, Ned V.; Dudley, Donald

The study reports on a nationwide survey that investigated the specific planning steps and procedures used by colleges and universities in implementing microcomputer instruction into their teacher education curriculum. The findings presented are based on 101 usable responses to a 55-item questionnaire mailed to five major college and university…

Home, Hearth and Computing.

ERIC Educational Resources Information Center

Seelig, Anita

1982-01-01

Advantages of having children use microcomputers at school and home include learning about sophisticated concepts early in life without a great deal of prodding, playing games that expand knowledge, and becoming literate in computer knowledge needed later in life. Includes comments from parents on their experiences with microcomputers and…

The Microcomputer in the Administrative Office.

ERIC Educational Resources Information Center

Huntington, Fred

1983-01-01

Discusses microcomputer uses for administrative computing in education at site level and central office and recommends that administrators start with a word processing program for time management, an electronic spreadsheet for financial accounting, a database management system for inventories, and self-written programs to alleviate paper…

Supporting Non-Standard Micro Hardware and Software at Bowling Green.

ERIC Educational Resources Information Center

Whitmire, Duane E.

1990-01-01

Bowling Green State University (Ohio) produces a microcomputer resource handbook that contains a comprehensive listing of campus employees with unique microcomputer expertise they are willing to share. The project's current success suggests expansion and follow-up activities in the future. (Author/MSE)

Computer Series, 61: Bits & Pieces, 24.

ERIC Educational Resources Information Center

Moore, John W., Ed.

1985-01-01

Describes: (1) laboratory information science in the clinical chemistry curriculum; (2) testing Boyle's Law, a context for statistical methods in undergraduate laboratories; (3) acquiring chemical concepts using microcomputers as tutees; and (4) using Data Interchange Format files for Apple microcomputers. Includes feedback from a previous article…

Microcomputer Technology in Schools: Issues for Research.

ERIC Educational Resources Information Center

Kane, Janet H.; And Others

This exploratory, multi-disciplinary study, which was undertaken to identify a research agenda for the educational implementation and impact of microprocessing technology, used case study methodology to explore the relationship between the social contexts and the microcomputer innovation. Three geographically distinct school districts with a…

Computer Simulation in Tomorrow's Schools.

ERIC Educational Resources Information Center

Foster, David

1984-01-01

Suggests use of simulation as an educational strategy has promise for the school of the future; discusses specific advantages of simulations over alternative educational methods, role of microcomputers in educational simulation, and past obstacles and future promise of microcomputer simulations; and presents a literature review on effectiveness of…

Riding the Technology Wave.

ERIC Educational Resources Information Center

Malan, Pierre

This paper presents an overview of information technology development. The first section sets the scene, comparing the first WAN (Wide Area Network) and Intel processor to current technology. The birth of the microcomputer is described in the second section, including historical background on semiconductors, microprocessors, and the microcomputer.…

What Can Computer Technology Offer Special Education Administrators?

ERIC Educational Resources Information Center

Case, Elizabeth J.; And Others

The paper provides an overview of fundamental uses of the microcomputer by special education administrators in a large-city school district. Microcomputer applications are suggested for the following applications: school-level administrative functions (e.g., tracking equipment repair, budget forecasting, and class scheduling); district-wide…

Microcomputers in Education.

ERIC Educational Resources Information Center

Anderson, Cheryl A.

Designed to answer basic questions educators have about microcomputer hardware and software and their applications in teaching, this paper describes the revolution in computer technology that has resulted from the development of the microchip processor and provides information on the major computer components; i.e.; input, central processing unit,…

Evaluation of Five Microcomputer CAD Packages.

ERIC Educational Resources Information Center

Leach, James A.

1987-01-01

Discusses the similarities, differences, advanced features, applications and number of users of five microcomputer computer-aided design (CAD) packages. Included are: "AutoCAD (V.2.17)"; "CADKEY (V.2.0)"; "CADVANCE (V.1.0)"; "Super MicroCAD"; and "VersaCAD Advanced (V.4.00)." Describes the…

Microcomputers: Independence and Information Access for the Physically Handicapped.

ERIC Educational Resources Information Center

Regen, Shari S.; Chen, Ching-chih

1984-01-01

Provides overview of recent technological developments in microcomputer technology for the physically disabled, including discussion of view expansion, "talking terminals," voice recognition, and price and convenience of micro-based products. Equipment manufacturers and training centers for the physically disabled are listed and microcomputer…

Microcomputers, Model Rockets, and Race Cars.

ERIC Educational Resources Information Center

Mirus, Edward A., Jr.

1985-01-01

The industrial education orientation program at Wisconsin School for the Deaf (WSD) presents problem-solving situations to all seventh- and eighth-grade hearing-impaired students. WSD developed user-friendly microcomputer software to guide students individually through complex computations involving model race cars and rockets while freeing…

Using the BBC Microcomputer to Teach the Electrocardiogram to Biology Students.

ERIC Educational Resources Information Center

Dewhurst, D. G.; And Others

1990-01-01

Described are two methods which use microcomputers to illustrate the use of the electrocardiogram and the function of the heart. Included are a simulation and a method of collecting live electrocardiograms. Hardware, software, and the use of these systems are discussed. (CW)

Microcomputer Analysis of Children's Language Samples.

ERIC Educational Resources Information Center

Rosenkoetter, Sharon E.; Rice, Mabel L.

The workshop paper examines the use of microcomputer packages to analyze spontaneous language samples of children with communication disorders. Advantages of computerized analysis are seen to include time saving, more efficient data management, and increased objectivity. To help consumers determine which programs to buy, four aspects are…

A microcomputer model for simulating pressurized flow in a storm sewer system : interim report.

DOT National Transportation Integrated Search

1988-01-01

A study is being conducted on the development of a microcomputer model for simulating storm sewer flow under surcharged or pressurized conditions. Several existing models, including the EPA Storm Water Management Hodel (SYMM) and the Illinois Urban D...

Comprehensive Microcomputer Applications for Severely Physically Handicapped Children.

ERIC Educational Resources Information Center

Rushakoff, G. Evan; Lombardino, Linda J.

1983-01-01

Explained for educators of severly physically handicapped (SPH) children are basic component parts of the microcomputer system, adaptations for children unable to use a standard keyboard, and applications for communication, academic work, writing, creative arts, recreation, future employment, and young SPH children. Factors educators should…

MicroSIFT Courseware Evaluations (88-168).

ERIC Educational Resources Information Center

Holznagel, Donald C., Ed.

This document consists of 81 microcomputer software package evaluations prepared for the MicroSIFT (Microcomputer Software and Information for Teachers) Clearinghouse at the Northwest Regional Educational Laboratory (NWREL) and distributed during 1983 as "sets" 6, 7, and 8. The concise, single-sheet resume describing and evaluating each…

Evaluation of a continuous-rotation, high-speed scanning protocol for micro-computed tomography.

PubMed

Kerl, Hans Ulrich; Isaza, Cristina T; Boll, Hanne; Schambach, Sebastian J; Nolte, Ingo S; Groden, Christoph; Brockmann, Marc A

2011-01-01

Micro-computed tomography is used frequently in preclinical in vivo research. Limiting factors are radiation dose and long scan times. The purpose of the study was to compare a standard step-and-shoot to a continuous-rotation, high-speed scanning protocol. Micro-computed tomography of a lead grid phantom and a rat femur was performed using a step-and-shoot and a continuous-rotation protocol. Detail discriminability and image quality were assessed by 3 radiologists. The signal-to-noise ratio and the modulation transfer function were calculated, and volumetric analyses of the femur were performed. The radiation dose of the scan protocols was measured using thermoluminescence dosimeters. The 40-second continuous-rotation protocol allowed a detail discriminability comparable to the step-and-shoot protocol at significantly lower radiation doses. No marked differences in volumetric or qualitative analyses were observed. Continuous-rotation micro-computed tomography significantly reduces scanning time and radiation dose without relevantly reducing image quality compared with a normal step-and-shoot protocol.

Grandfathered, Grandmothered, And ACA-Compliant Health Plans Have Equivalent Premiums.

PubMed

Whitmore, Heidi; Gabel, Jon R; Satorius, Jennifer L; Green, Matthew

2017-02-01

Many small employers offer employees health plans that are not fully compliant with Affordable Care Act (ACA) provisions such as covering preventive services without cost sharing. These "grandfathered" and "grandmothered" plans accounted for about 65 percent of enrollment in the small-group market in 2014. Premium costs for these and ACA-compliant plans were equivalent. Project HOPE—The People-to-People Health Foundation, Inc.

From self-organization to emergence: Aesthetic implications of shifting ideas of organization

NASA Astrophysics Data System (ADS)

Hayles, N. Katherine

1996-06-01

From 1945-95, a shift took place within cybernetics from a paradigm emphasizing self-organization to one emphasizing emergence. Central in bringing about this shift was the spread of the microcomputer. With its greatly enhanced processing speed and memory capabilities, the microcomputer made simulations possible that could not have been done before. The microcomputer has also been instrumental in effecting a similar change within literary texts. To exemplify the aesthetic implications of the shift from self-organization to emergence, the chapter discusses Vladmir Nabokov's Pale Fire and Milorad Pavić's Dictionary of the Khazars: A Lexicon Novel in 100,000 Words.

Implementation and use of a microcomputer-based management information system to monitor dairy herd performance

PubMed Central

Lissemore, Kerry D.; Leslie, Ken E.; Menzies, Paula I.; Martin, S. Wayne; Meek, Alan H.; Etherington, Wayne G.

1992-01-01

A microcomputer-based herd management information system was implemented as part of the herd health program provided to 13 dairy clients by the Ontario Veterinary College, University of Guelph. The study was conducted over a two year period. Data were collected from on-farm event diaries, veterinary visit reports, and production testing information. Selected indices of reproduction, udder health, production, and heifer performance were reported. It was concluded that the implementation of a microcomputer-based information management system, operated as a bureau service, was feasible. However, limitations to the implementation in veterinary practice were identified. PMID:17423945

Graphic Interfaces and Online Information.

ERIC Educational Resources Information Center

Percival, J. Mark

1990-01-01

Discusses the growing importance of the use of Graphic User Interfaces (GUIs) with microcomputers and online services. Highlights include the development of graphics interfacing with microcomputers; CD-ROM databases; an evaluation of HyperCard as a potential interface to electronic mail and online commercial databases; and future possibilities.…

Instructional Microcomputer Applications by Business Teachers in Minnesota.

ERIC Educational Resources Information Center

Lambrecht, Judith J.

Data were collected from Minnesota secondary and postsecondary business teachers regarding their instructional microcomputer applications and their attitudes about several instructional computing issues. Usable surveys were returned by 342 teachers in 236 schools. The predominant brand of computer at the secondary level was the Apple II; most…

Microcomputers and Continuing Motivation.

ERIC Educational Resources Information Center

Seymour, Sherrie L.; And Others

1987-01-01

Describes study that investigated the effects of medium of instructional practice, task difficulty, and gender on continuing motivation. Microcomputers and paper and pencil format were compared on tasks at a hard or easy difficulty level with fifth and sixth grade students, and questionnaires were used to determine student attitudes. (Author/LRW)

Applications of Microcomputers in the Education of the Physically Disabled Child.

ERIC Educational Resources Information Center

Foulds, Richard A.

1982-01-01

Microcomputers can serve as expressive communication tools for severely physically disabled persons. Features such as single input devices, direct selection aids, and speech synthesis capabilities can be extremely useful. The trend toward portable battery-operated computers will make the technology even more accessible. (CL)

The 1990-91 Educational Software Preview Guide.

ERIC Educational Resources Information Center

Best, Anita, Ed.; And Others

Developed to help educators locate microcomputer software programs they may want to preview for students in grades K-12, this guide lists commercially available microcomputer software programs that have been favorably reviewed by members of the Educational Software Evaluation Consortium. Programs are arranged alphabetically by title within…

The Use of Monte Carlo Techniques to Teach Probability.

ERIC Educational Resources Information Center

Newell, G. J.; MacFarlane, J. D.

1985-01-01

Presents sports-oriented examples (cricket and football) in which Monte Carlo methods are used on microcomputers to teach probability concepts. Both examples include computer programs (with listings) which utilize the microcomputer's random number generator. Instructional strategies, with further challenges to help students understand the role of…

Microcomputers and the Future.

ERIC Educational Resources Information Center

Uhlig, George E.

Dangers are inherent in predicting the future. In discussing the future of computers, specifically, it is useful to consider the brief history of computers from the development of ENIAC to microcomputers. Advances in computer technology can be seen by looking at changes in individual components, including internal and external memory, the…

Methods of Microcomputer Research in Early Childhood Special Education.

ERIC Educational Resources Information Center

Fujiura, Glenn; Johnson, Lawrence J.

1986-01-01

The review of some recent studies on use of microcomputers in early childhood special education highlights methodological issues including the qualitative quantitative distinction and the interdependence of research design and interpretation. Imbedding qualitative methods into quasi- or true-experimental designs can provide more information than…

A proposed microcomputer implementation of an Omega navigation processor

NASA Technical Reports Server (NTRS)

Abel, J. D.

1976-01-01

A microprocessor navigation systems using the Omega process is discussed. Several methods for correcting incoming sky waves are presented along with the hardware design which depends on a microcomputer. The control program is discussed, and block diagrams of the Omega processor and interface systems are presented.

Model Experiment of Two-Dimentional Brownian Motion by Microcomputer.

ERIC Educational Resources Information Center

Mishima, Nobuhiko; And Others

1980-01-01

Describes the use of a microcomputer in studying a model experiment (Brownian particles colliding with thermal particles). A flow chart and program for the experiment are provided. Suggests that this experiment may foster a deepened understanding through mutual dialog between the student and computer. (SK)

Microcomputer Calculation of Thermodynamic Properties from Molecular Parameters of Gases.

ERIC Educational Resources Information Center

Venugopalan, Mundiyath

1990-01-01

Described in this article is a problem-solving activity which integrates the application of microcomputers with the learning of physical chemistry. Students use the program with spectroscopic data to calculate the thermodynamic properties and compare them with the values from the thermochemical tables. (Author/KR)

Preparation of School District Budgets with Microcomputer Electronic Spreadsheets.

ERIC Educational Resources Information Center

Hinitz, Herman J.; Gourley, Marlene Fisher, Ed.

1996-01-01

School districts prepare annual budgets in order to have adequate funding available for their operations. Today's budgets require flexibility and adaptability as school-district finances and governmental regulations and guidelines change. This article discusses several types of budgets and budget preparation that utilize microcomputer technology.…

Criteria for the Evaluation of Microcomputer Courseware.

ERIC Educational Resources Information Center

Cohen, Vicki Blum

1983-01-01

Discusses attributes which are offered as set of standards to judge instructional software--those unique to design of microcomputer courseware and those included in design of all instruction. Curriculum role, modes of interaction, computer managed instruction, graphics, feedback, packaging, and manuals are noted. Fourteen references are included.…

The Computer and Recreation.

ERIC Educational Resources Information Center

Edwards, Paul

The paper examines the applications of microcomputers to recreation programing for blind persons. The accessibility of microcomputers to this population is discussed, and the advantages as well as disadvantages of speech synthesis equipment are noted. Information is presented on the modification of hardware for Radio Shack and Apple computers.…

Microcomputer Activities Which Encourage the Reading-Writing Connection.

ERIC Educational Resources Information Center

Balajthy, Ernest

Many reading teachers, cognizant of the creative opportunities for skill development allowed by new reading-writing software, are choosing to use microcomputers in their classrooms full-time. Adventure story creation programs capitalize on reading-writing integration by allowing children, with appropriate assistance, to create their own…

Networking and Microcomputers. ERIC Digest.

ERIC Educational Resources Information Center

Klausmeier, Jane

Computer networks can fall into three broad categories--local area networks (LAN), microcomputer based messaging systems (this includes computer bulletin board systems), or commercial information systems. Many of the same types of activities take place within the three categories. The major differences are the types of information available and…

Validity of the Microcomputer Evaluation Screening and Assessment Aptitude Scores.

ERIC Educational Resources Information Center

Janikowski, Timothy P.; And Others

1991-01-01

Examined validity of Microcomputer Evaluation Screening and Assessment (MESA) aptitude scores relative to General Aptitude Test Battery (GATB) using multitrait-multimethod correlational analyses. Findings from 54 rehabilitation clients and 29 displaced workers revealed no evidence to support the construct validity of the MESA. (Author/NB)

Convergent and Discriminant Validity of the Microcomputer Evaluation Screening and Assessment (MESA) Interest Survey.

ERIC Educational Resources Information Center

Janikowski, Timothy P.; And Others

1990-01-01

Examined construct validity of Microcomputer Evaluation Screening and Assessment (MESA) Interest Survey. Administered MESA and United States Employment Service (USES) Interest Inventory to 74 volunteer rehabilitation clients. Evidence supported convergent and discriminant validity of MESA. Found fewer significant intercorrelations among MESA…

Microcomputer-Based Digital Signal Processing Laboratory Experiments.

ERIC Educational Resources Information Center

Tinari, Jr., Rocco; Rao, S. Sathyanarayan

1985-01-01

Describes a system (Apple II microcomputer interfaced to flexible, custom-designed digital hardware) which can provide: (1) Fast Fourier Transform (FFT) computation on real-time data with a video display of spectrum; (2) frequency synthesis experiments using the inverse FFT; and (3) real-time digital filtering experiments. (JN)

Fluid Power Multi-actuator Circuit Board with Microcomputer Control Option.

ERIC Educational Resources Information Center

McKechnie, R. E.; Vickers, G. W.

1981-01-01

Describes a portable fluid power engineering laboratory and class demonstration apparatus designed to enable students to design, build, and test multi-actuator circuits. Features a variety of standard pneumatic values and actuators fitted with quick disconnect couplings. Discusses sequencing circuit boards, microcomputer control, cost, and…

A Preserved Context Indexing System for Microcomputers: PERMDEX.

ERIC Educational Resources Information Center

Yerkey, A. Neil

1983-01-01

Following a discussion of derivative versus assignment indexing, use of roles, and concept behind Preserved Concept Indexing System, features of PERMDEX (microcomputer program to assist in creation of permuted printed index) are described including indexer input and prompts, the shunting algorithm, and sorting and printing routines. Fourteen…

Developing Telecommunication Linkages for Microcomputer-Aided Instruction. TDC Research Report No. 1.

ERIC Educational Resources Information Center

Blinn, Charles R.; And Others

A project undertaken at the University of Minnesota evaluated two microcomputer teletraining systems (audiographic conferencing) to determine the effectiveness of this technology for point-to-point and multipoint distance education. System design requirements included broadcast keystrokes, error checking, master-slave linkages, simultaneous voice…

A Method to Calculate and Analyze Residents' Evaluations by Using a Microcomputer Data-Base Management System.

ERIC Educational Resources Information Center

Mills, Myron L.

1988-01-01

A system developed for more efficient evaluation of graduate medical students' progress uses numerical scoring and a microcomputer database management system as an alternative to manual methods to produce accurate, objective, and meaningful summaries of resident evaluations. (Author/MSE)

Sentence Building with a Macintosh Microcomputer.

ERIC Educational Resources Information Center

Bennett, Ruth

A study using microcomputers for instruction in sentence-building skills with two groups of American Indians in bilingual education programs found computer-assisted instruction to be effective in developing differential skills in the different age groups. The method used small group activity at the computer, emphasizing the cooperative learning…

The Use of Microcomputers for Information Retrieval.

ERIC Educational Resources Information Center

Scharff, L.; And Others

1983-01-01

Provides a detailed description of the microcomputer hardware and software used by the Euronet-Diane Launch Team for automating a number of functions associated with online searching. Background, login procedures, program architecture, maintenance problems, comments on lessons learned, and suggestions for avoiding difficulties with this type of…

Evaluation of drug interaction microcomputer software: comparative study.

PubMed

Poirier, T I; Giudici, R

1991-01-01

Twelve drug interaction microcomputer software programs were evaluated and compared using general and specific criteria. This article summarizes and compares the features, ratings, advantages, and disadvantages of each program. Features of an ideal drug interaction program are noted. Recommended programs based on three price ranges are suggested.

Microware: Hard, Soft, and Firm.

ERIC Educational Resources Information Center

Hutten, Leah R.

1984-01-01

Because a microcomputer system can be an expensive acquisition, the purchase decision needs to be made carefully. Steps to purchasing a microcomputer include: evaluating the data and word processing needs of the office, determining needs being met with existing capabilities, and making a cost-benefit comparison among systems. (MLW)

Application of Minicomputers and Microcomputers to Information Handling.

ERIC Educational Resources Information Center

Griffiths, Jose-Marie

This study assesses the application of both minicomputers and microcomputers to information-handling procedures and makes recommendations for automating such procedures, particularly in developing nations. The report is based on a survey of existing uses of small computing equipment in libraries, archives, and information centers which was…

Compliant mechanism road bicycle brake: a rigid-body replacement case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olsen, Brian M; Howell, Larry L; Magleby, Spencer P

2011-01-19

The design of high-performance bicycle brakes is complicated by the competing design objectives of increased performance and low weight. But this challenge also provides a good case study to demonstrate the design of compliant mechanisms to replace current rigid-link mechanisms. This paper briefly reviews current road brake designs, demonstrates the use of rigid-body replacement synthesis to design a compliant mechanism, and illustrates the combination of compliant mechanism design tools. The resulting concept was generated from the modified dual-pivot brake design and is a partially compliant mechanism where one pin has the dual role of a joint and a mounting pin.more » The pseudo-rigid-body model, finite element analysis, and optimization algorithms are used to generate design dimensions, and designs are considered for both titanium and E-glass flexures. The resulting design has the potential of reducing the part count and overall weight while maintaining a performance similar to the benchmark.« less

Compliant displacement-multiplying apparatus for microelectromechanical systems

DOEpatents

Kota, Sridhar; Rodgers, M. Steven; Hetrick, Joel A.

2001-01-01

A pivotless compliant structure is disclosed that can be used to increase the geometric advantage or mechanical advantage of a microelectromechanical (MEM) actuator such as an electrostatic comb actuator, a capacitive-plate electrostatic actuator, or a thermal actuator. The compliant structure, based on a combination of interconnected flexible beams and cross-beams formed of one or more layers of polysilicon or silicon nitride, can provide a geometric advantage of from about 5:1 to about 60:1 to multiply a 0.25-3 .mu.m displacement provided by a short-stroke actuator so that such an actuator can be used to generate a displacement stroke of about 10-34 .mu.m to operate a ratchet-driven MEM device or a microengine. The compliant structure has less play than conventional displacement-multiplying devices based on lever arms and pivoting joints, and is expected to be more reliable than such devices. The compliant structure and an associated electrostatic or thermal actuator can be formed on a common substrate (e.g. silicon) using surface micromachining.

Study of non-compliance among chronic hemodialysis patients and its impact on patients' outcomes.

PubMed

Ibrahim, Salwa; Hossam, Mohammed; Belal, Dawlat

2015-03-01

Non-adherence to prescription is common among hemodialysis (HD) patients and has been associated with significant morbidity. At least 50% of HD patients are believed to be non-adherent to some part of their treatment. We aimed to assess the prevalence of non-adherence to dialysis prescription among 100 chronic HD patients. We explored the relationship between non-adherence on one hand and socioeconomic profile, depression scores and cognitive function on the other hand. The impact of patients' non-adherence on nutritional status, quality of life and dialysis adequacy was also assessed. The mean age of the study group was 50.51 ± 12.0 years. There were 62 females and 38 males in the study. Thirty-six patients (36%) were non-compliant to their dialysis prescription. No significant differences were detected between compliant and non-compliant patients in their education level and employment status. Inter-dialytic weight gain, serum phosphorus and depression scores were significantly higher in non-compliant patients compared with compliant patients, whereas body weight, serum albumin, serum calcium, quality of life scores and nutrition scores were significantly higher in compliant patients (P <0.05). In conclusion, non-adherence is highly prevalent among chronic HD patients and is associated with poor quality of life, depression and malnutrition.

Elastic/plastic analyses of advanced composites investigating the use of the compliant layer concept in reducing residual stresses resulting from processing

NASA Technical Reports Server (NTRS)

Arnold, Steven M.; Arya, Vinod K.; Melis, Matthew E.

1990-01-01

High residual stresses within intermetallic and metal matrix composite systems can develop upon cooling from the processing temperature to room temperature due to the coefficient of thermal expansion (CTE) mismatch between the fiber and matrix. As a result, within certain composite systems, radial, circumferential, and/or longitudinal cracks have been observed to form at the fiber-matrix interface. The compliant layer concept (insertion of a compensating interface material between the fiber and matrix) was proposed to reduce or eliminate the residual stress buildup during cooling and thus minimize cracking. The viability of the proposed compliant layer concept is investigated both elastically and elastoplastically. A detailed parametric study was conducted using a unit cell model consisting of three concentric cylinders to determine the required character (i.e., thickness and material properties) of the compliant layer as well as its applicability. The unknown compliant layer mechanical properties were expressed as ratios of the corresponding temperature dependent Ti-24Al-11Nb (a/o) matrix properties. The fiber properties taken were those corresponding to SCS-6 (SiC). Results indicate that the compliant layer can be used to reduce, if not eliminate, radial and circumferential residual stresses within the fiber and matrix and therefore also reduce or eliminate the radial cracking. However, with this decrease in in-plane stresses, one obtains an increase in longitudinal stress, thus potentially initiating longitudinal cracking. Guidelines are given for the selection of a specific compliant material, given a perfectly bonded system.

History Microcomputer Games: Update 2.

ERIC Educational Resources Information Center

Sargent, James E.

1985-01-01

Provides full narrative reviews of B-1 Nuclear Bomber (Avalon, 1982); American History Adventure (Social Science Microcomputer Review Software, 1985); Government Simulations (Prentice-Hall, 1985); and The Great War, FDR and the New Deal, and Hitler's War, all from New Worlds Software, 1985. Lists additional information on five other history and…

South America Map Study.

ERIC Educational Resources Information Center

Canipe, Stephen L.

A simple "menu-driven" microcomputer program on map studies, designed to teach the geography of South America and certain economic facts about its countries, is presented. The program is written for an Apple II+ or Apple IIe computer; use on any other microcomputer will require substantial changes due to high resolution drawings and…

From Teaching Machines to Microcomputers: Some Milestones in the History of Computer-Based Instruction.

ERIC Educational Resources Information Center

Niemiec, Richard P.; Walberg, Herbert J.

1989-01-01

Examines the history of computer-based education within the context of psychological theorists of instruction, including Pressey, Thorndike, Skinner, and Crowder. Topics discussed include computer-managed instruction; computer-assisted instruction; the Computer Curriculum Corporation; PLATO; TICCIT; microcomputers; effects on students; and cost…

A Nuclear Reactions Primer with Computers.

ERIC Educational Resources Information Center

Calle, Carlos I.; Roach, Jennifer A.

1987-01-01

Described is a microcomputer software program NUCLEAR REACTIONS designed for college level students and in use at Sweet Briar College (Sweet Briar, VA). The program is written in Microsoft Basic Version 2.1 for the Apple Macintosh Microcomputer. It introduces two conservation principles: (1) conservation of charge; and (2) conservation of nucleon…

The Spreadsheet in an Educational Setting. Microcomputing Working Paper Series F 84-4.

ERIC Educational Resources Information Center

Wozny, Lucy

This overview of a specific spreadsheet, Microsoft's Multiplan for the Apple Macintosh microcomputer, emphasizes specific features that are important to the academic community, including the mathematical functions of algebra, trigonometry, and statistical analysis. Additional features are summarized, including data formats for both numerical and…

Print Station Operation. Microcomputing Working Paper Series.

ERIC Educational Resources Information Center

Wozny, Lucy Anne

During the academic year 1983-84, Drexel University instituted a new policy requiring all incoming students to have access to a microcomputer. The computer chosen to fulfill this requirement was the Macintosh from Apple Computer, Inc. Although this requirement put an additional financial burden on the Drexel student, the university administration…

Getting Started with Microcomputers--A Practical Beginner's Guide.

ERIC Educational Resources Information Center

Davies, Norman F.

1985-01-01

Discusses the results of a questionnaire sent to experts in the field of computer assisted language learning. Covers such topics as: 1) points to consider before buying a microcomputer; 2) recommended brands and peripheral equipment; 3) software; 4) utilizing programming languages; and 5) literature and contact organizations. (SED)

Audio-Enhanced Computer Assisted Learning and Computer Controlled Audio-Instruction.

ERIC Educational Resources Information Center

Miller, K.; And Others

1983-01-01

Describes aspects of use of a microcomputer linked with a cassette recorder as a peripheral to enhance computer-assisted learning (CAL) and a microcomputer-controlled tape recorder linked with a microfiche reader in a commercially available teaching system. References and a listing of control programs are appended. (EJS)

Guidelines for the Development of a Microcomputer Curriculum.

ERIC Educational Resources Information Center

Washington Office of the State Superintendent of Public Instruction, Olympia. Div. of Vocational-Technical and Adult Education Services.

This document is designed to provide assistance to people in school districts who are responsible for making decisions regarding the purchase and use of microcomputers in business and office education programs. A section on planning considerations outlines considerations that need to be addressed, available resources, and maximizing the use of…

Using Interactive Computing to Expand Intelligence Testing: A Critique and Prospectus.

ERIC Educational Resources Information Center

Hunt, Earl; Pellegrino, James

1985-01-01

There are economic advantages in using microcomputers as automated testing stations for measuring aptitude and intelligence. Microcomputers also make it possible to expand and modify testing procedures for psychological functions included in conventional tests and to test psychological functions not generally assessed by conventional tests, such…

The Video PATSEARCH System: An Interview with Peter Urbach.

ERIC Educational Resources Information Center

Videodisc/Videotext, 1982

1982-01-01

The Video PATSEARCH system consists of a microcomputer with a special keyboard and two display screens which accesses the PATSEARCH database of United States government patents on the Bibliographic Retrieval Services (BRS) search system. The microcomputer retrieves text from BRS and matching graphics from an analog optical videodisc. (Author/JJD)

Developing and Implementing a Voluntary Personal Computer Program in the Business School: One College's Experience.

ERIC Educational Resources Information Center

Darter, Marvin E.; Wise, Donald E.

1989-01-01

Describes the experiences of Rider College School of Business Administration in implementing the use of microcomputers for courses in the business curriculum. Topics discussed include student purchase of microcomputers; cost effectiveness; software considerations; security for student equipment; printers; large screen projection facilities; and…

CP/M: A Family of 8- and 16-Bit Computer Operating Systems.

ERIC Educational Resources Information Center

Kildall, Gary

1982-01-01

Traces the development of the computer CP/M (Control Program for Microcomputers) and MP/M (Multiprogramming Monitor Microcomputers) operating system by Gary Kildall of Digital Research Company. Discusses the adaptation of these operating systems to the newly emerging 16 and 32 bit microprocessors. (Author/LC)

Using Microcomputers in School Administration. Fastback No. 248.

ERIC Educational Resources Information Center

Connors, Eugene T.; Valesky, Thomas C.

This "fastback" outlines the steps to take in computerizing school administration. After an introduction that lists the potential benefits of microcomputers in administrative offices, the booklet begins by delineating a three-step process for establishing an administrative computer system: (1) creating a district-level committee of administrators,…

Microcomputer Software Technician Curriculum.

ERIC Educational Resources Information Center

EASTCONN Regional Educational Services Center, North Windham, CT.

This curriculum guide, developed for high schools in Connecticut, outlines a 4-year program for training microcomputer software technicians. Following a list of nine general objectives of the program, the guide provides a list of competencies that students are expected to develop in each of the courses of the 4-year program. The guide then…

BERG2 Micro-computer Estimation of Freeze and Thaw Depths and Thaw Consolidation (PDF file)

DOT National Transportation Integrated Search

1989-06-01

The BERG2 microcomputer program uses a methology similar to the Modified Berggren method (Aldrich and Paynter, 1953) to estimate the freeze and thaw depths in layered soil systems. The program also provides an estimate of the thaw consolidation in ic...

Computers in Education Are Entering the Fourth Revolution--Yet Health Education Is Just Entering the Third.

ERIC Educational Resources Information Center

Duncan, David F.

1983-01-01

Health educators are reacting today to what the author calls the third revolution in computers in education-- the use of microcomputers as teaching machines. He defines each revolution, as well as discussing how the fourth revolution, the portable microcomputer, is already underway. (JMK)

Microcomputer Calculation of Theoretical Pre-Exponential Factors for Bimolecular Reactions.

ERIC Educational Resources Information Center

Venugopalan, Mundiyath

1991-01-01

Described is the application of microcomputers to predict reaction rates based on theoretical atomic and molecular properties taught in undergraduate physical chemistry. Listed is the BASIC program which computes the partition functions for any specific bimolecular reactants. These functions are then used to calculate the pre-exponential factor of…

Microcomputer Applications in Local Assessment Systems.

ERIC Educational Resources Information Center

Harnisch, Delwyn L.; And Others

The capabilities and hardware requirements of four microcomputer software packages produced by the Office of Educational Testing, Research and Service at the University of Illinois at Urbana-Champaign are described. These programs are: (1) the Scan-Tron Forms Analysis Package Version 2.0, an interface between an IBM-compatible and a Scan-Tron…

The Use of Microcomputers in the Treatment of Cognitive-Communicative Impairments.

ERIC Educational Resources Information Center

Story, Tamara B.; Sbordone, Robert J.

1988-01-01

The use of microcomputer-assisted therapy as part of the total rehabilitation plan for brain-injured individuals with cognitive-communicative impairments is addressed. Design of effective computer-assisted remediation requires a careful decision-making process. Specific types of software are suggested for dealing with deficits in organization,…

Online Searching with a Microcomputer--Getting Started.

ERIC Educational Resources Information Center

Casbon, Susan

1983-01-01

Based on online searching experiences on microcomputer at a small liberal arts college, this article outlines for the novice advantages and disadvantages of micro-searching, legal implications, future trends, and factors to consider in selecting hardware and software. A 16-item bibliography arranged in order of usefulness and 10 references are…

Neonatal Information System Using an Interactive Microcomputer Data Base Management Program

PubMed Central

Engelke, Stephen C.; Paulette, Ed W.; Kopelman, Arthur E.

1981-01-01

A low cost, interactive microcomputer data base management system is presented which is being used in a neonatal follow-up program at the East Carolina University School of Medicine. The features and flexibility of the system could be applied to a variety of medical care settings.

Microcomputers and Stimulus Control: From the Laboratory to the Classroom.

ERIC Educational Resources Information Center

LeBlanc, Judith M.; And Others

1985-01-01

The need for developing a technology of teaching that equals current sophistication of microcomputer technology is addressed. The importance of principles of learning and behavior analysis is emphasized. Potential roles of stimulus control and precise error analysis in educational program development and in prescription of specific learning…

Microcomputers for the Vocational Education of Special Needs Students.

ERIC Educational Resources Information Center

Tindall, Lloyd W.; Gugerty, John J.

Microcomputer assisted instruction for the vocational education of special needs students is in the formative stage. Computer programmers do not understand educational processes well enough to produce effective software, while the majority of special needs educators lack computer training. Special needs educators need to use existing knowledge in…

Using Microcomputers for Assessment and Error Analysis. Monograph #23.

ERIC Educational Resources Information Center

Hasselbring, Ted S.; And Others

This monograph provides an overview of computer-based assessment and error analysis in the instruction of elementary students with complex medical, learning, and/or behavioral problems. Information on generating and scoring tests using the microcomputer is offered, as are ideas for using computers in the analysis of mathematical strategies and…

A Multi-User Microcomputer System for Small Libraries.

ERIC Educational Resources Information Center

Leggate, Peter

1988-01-01

Describes the development of Bookshelf, a multi-user microcomputer system for small libraries that uses an integrated software package. The discussion covers the design parameters of the package, which were based on a survey of seven small libraries, and some characteristics of the software. (three notes with references) (CLB)

A Laboratory Application of Microcomputer Graphics.

ERIC Educational Resources Information Center

Gehring, Kalle B.; Moore, John W.

1983-01-01

A PASCAL graphics and instrument interface program for a Z80/S-100 based microcomputer was developed. The computer interfaces to a stopped-flow spectrophotometer replacing a storage oscilloscope and polaroid camera. Applications of this system are discussed, indicating that graphics and analog-to-digital boards have transformed the computer into…

The Impact of Microcomputers on Composition Students.

ERIC Educational Resources Information Center

Hocking, Joan

To determine whether computer assisted instruction was just a fad or a viable alternative to traditional methods for teaching English composition, a microcomputer was used in a traditional college freshman English course. The class was divided into small groups: some went to the computer lab, while others worked in the classroom. Interactive…

Peer Taught Microcomputer Skills: An Untapped Resource for Stretching the Budget.

ERIC Educational Resources Information Center

Teer, Harold B., Jr.; And Others

1988-01-01

Discussion of the use of peer teachers to provide college students with microcomputer education focuses on a video course used to teach Lotus 1-2-3 spreadsheet software. Budget considerations are discussed, student and faculty reactions are described, and potential time savings to faculty are examined. (LRW)

A Modular System of Interfacing Microcomputers.

ERIC Educational Resources Information Center

Martin, Peter

1983-01-01

Describes a system of interfacing allowing a range of signal conditioning and control modules to be connected to microcomputers, enabling execution of such experiments as: examining rate of cooling; control by light-activated switch; pH measurements; control frequency of signal generators; and making automated measurements of frequency response of…

A Public Domain Software Library for Reading and Language Arts.

ERIC Educational Resources Information Center

Balajthy, Ernest

A three-year project carried out by the Microcomputers and Reading Committee of the New Jersey Reading Association involved the collection, improvement, and distribution of free microcomputer software (public domain programs) designed to deal with reading and writing skills. Acknowledging that this free software is not without limitations (poor…

Microcomputer Applications for Library Instruction: Automation of Test and Assignment Scoring, and Student Record Keeping.

ERIC Educational Resources Information Center

Sugranes, Maria R.; Snider, Larry C.

1985-01-01

Describes the development of an automated library instruction records management system using microcomputer technology. Development described includes assessment of need, exploration of options, system design, and operational development. System products are identified and operational results are reported based on actual system performance.…

A Microcomputer Exercise on Genetic Transcription and Translation.

ERIC Educational Resources Information Center

Meisenheimer, John L.

1985-01-01

Describes a microcomputer program (written for the Apple II+) which can serve as a lecture demonstration aid in explaining genetic transcription and translation. The program provides unemotional information on student errors, thus serving as a review drill to supplement the classroom. Student participation and instructor options are discussed. (DH)

The Administrative Use of Microcomputers. Technical Report.

ERIC Educational Resources Information Center

Alabama Univ., University. Coll. of Education.

Citing the growing interest in using microcomputers as an aid in educational administration, this report discusses factors that must be considered when purchasing a computer and describes an actual case of computer implementation for administrative purposes. The first steps in the purchasing process are to assess and to prioritize the…

Measuring Time on the PET and Other Microcomputers

ERIC Educational Resources Information Center

Tesler, Larry

1978-01-01

The operation of the microcomputer requires one or more clocks or timers to measure intervals of different magnitudes. Methods are discussed for measuring time intervals on PET in hours, minutes, seconds, microseconds, miscellaneous units, and timing events on external devices. Directions are added for BASIC program applications of timing…

An Integrated Library System from Existing Microcomputer Programs.

ERIC Educational Resources Information Center

Kuntz, Lynda S.

1988-01-01

Demonstrates how three commercial microcomputer software packages--PC-Talk III, Wordstar, and dBase III--were combined to produce an integrated library system at the U.S. Army Concepts Analysis Agency library. The retrospective conversion process is discussed, and the four modules of the system are described: acquisitions/cataloging; online…

Serials Management by Microcomputer: The Potential of DBMS.

ERIC Educational Resources Information Center

Vogel, J. Thomas; Burns, Lynn W.

1984-01-01

Describes serials management at Philadelphia College of Textiles and Science library via a microcomputer, a file manager called PFS, and a relational database management system called dBase II. Check-in procedures, programing with dBase II, "static" and "active" databases, and claim procedures are discussed. Check-in forms are…

Microcomputer Learning Project. Willow Creek School Division No. 28.

ERIC Educational Resources Information Center

Millar, Garnet; MacLeod, Alan

Comparative research was conducted using gifted and average upper elementary and junior high school students to determine the effectiveness of utilizing microcomputers for the development of computer literacy and the implementation of curriculum courseware. Eighty students were selected as the treatment group and received instruction in the…

A Curriculum for Preparing Science Teachers to Use Microcomputers.

ERIC Educational Resources Information Center

Ellis, James D.; Kuerbis, Paul J.

1991-01-01

ENLIST Micros, a project designed to improve quality and quantity of microcomputer use in science teaching, is described. Rationale and procedures behind its development; description of the pilot test model; results of the initial field test and an implementation study; description of the revised ENLIST Micros curriculum; and recommendations for…

A Faculty-Computer Nexus. Microcomputing Working Paper Series.

ERIC Educational Resources Information Center

McCord, Joan

The effects of the rapid introduction of computing in education on Drexel University faculty were studied. The university decided that incoming 1983 freshmen would be required to own microcomputers, which could be bought at reduced cost. A questionnaire was administered to determine faculty members' experience with computers, their values,…

Minicomputers in the Teaching Laboratory - An Example from Physics.

ERIC Educational Resources Information Center

Farr, John E.; van den Berg, Willem H.

Microcomputers are commonly interfaced to external devices in scientific, industrial, and consumer settings for data acquisition and for control. The general problem under consideration is the task of taking measurements of some continuous phenomenon, transforming them into digital form, and storing the data in the microcomputer for later use.…

Apples for Teachers Pay Off.

ERIC Educational Resources Information Center

Geller, Irving, Ed.

1983-01-01

Reviews current trends in the educational market for microcomputers and software. As of June 1982, about 214,000 microcomputers were installed in schools, with Apple Computer (followed by Radio Shack and others) leading the field. A new federal program virtually eliminating how schools use funds may benefit computer assisted instruction. (JN)

Managing Microcomputer Technology as an Organizational Resource.

ERIC Educational Resources Information Center

Khosrowpour, Mehdi; Amoroso, Donald

With the realization that microcomputers provide an extraordinary value to the organization follows the need to address a variety of issues in order to more effectively manage these resources. Each of the 14 chapters, consisting of papers written by different authors, represents a different perspective existing in organizations with respect to the…

An Introduction to Database Management Systems.

ERIC Educational Resources Information Center

Warden, William H., III; Warden, Bette M.

1984-01-01

Description of database management systems for microcomputers highlights system features and factors to consider in microcomputer system selection. A method for ranking database management systems is explained and applied to a defined need, i.e., software support for indexing a weekly newspaper. A glossary of terms and 32-item bibliography are…

Computer Series, 65. Bits and Pieces, 26.

ERIC Educational Resources Information Center

Moore, John W., Ed.

1985-01-01

Describes: (l) a microcomputer-based system for filing test questions and assembling examinations; (2) microcomputer use in practical and simulated experiments of gamma rays scattering by outer shell electrons; (3) an interactive, screen-oriented, general linear regression program; and (4) graphics drill and game programs for benzene synthesis.…

Copyright Handbook for Videotapes and Microcomputer Software.

ERIC Educational Resources Information Center

Ensign, David; And Others

Developed to help library media personnel, administrators, and educators understand and work with the copyright law as it applies to videotape and microcomputer software, this handbook provides: (1) an overview of copyright, including rights granted to copyright holders and libraries and court interpretation of the copyright law; (2) suggestions…

Data Capture and Analysis Using the BBC Microcomputer--an Interfacing Project Applied to Enzyme Kinetics.

ERIC Educational Resources Information Center

Jones, Lawrence; Graham, Ian

1986-01-01

Reviews the main principles of interfacing and discusses the software developed to perform kinetic data capture and analysis with a BBC microcomputer linked to a recording spectrophotometer. Focuses on the steps in software development. Includes results of a lactate dehydrogenase assay. (ML)

Computing in Schools: An Australian Perspective. Australian Education Review Number 21.

ERIC Educational Resources Information Center

Anderson, Jonathan

Educational applications of computing are reviewed, beginning with a brief introduction to microcomputers and microcomputer characteristics that might be important for school use. An examination of significant models in computer education outside Australia emphasizes projects in the United Kingdom, France, and the United States, including the…

Graphing Misconceptions and Possible Remedies Using Microcomputer-Based Labs.

ERIC Educational Resources Information Center

Barclay, William L.

Graphing is a common and powerful symbol system for representing concrete data. Yet research has shown that students often have graphical misconceptions about how graphs are related to the concrete event. Currently, the Technical Education Research Center (TERC) is developing microcomputer-based laboratories (MBL) science units that use probes to…

A Low Cost Microcomputer System for Process Dynamics and Control Simulations.

ERIC Educational Resources Information Center

Crowl, D. A.; Durisin, M. J.

1983-01-01

Discusses a video simulator microcomputer system used to provide real-time demonstrations to strengthen students' understanding of process dynamics and control. Also discusses hardware/software and simulations developed using the system. The four simulations model various configurations of a process liquid level tank system. (JN)

A Measured Approach to Microcomputer Lab Design.

ERIC Educational Resources Information Center

Duggan, Brian

1994-01-01

Explores design considerations for a functional microcomputer lab, including ergonomics and furnishings; access for the disabled; the use of other media; hardware security; and software security, including virus protection. A summary paragraph comments on the role of planning and forecasting. A bibliography of eight titles for further reading is…

Microcomputer Applications Specialist.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This publication contains 16 subjects appropriate for use in a competency list for the occupation of microcomputer applications specialist, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 16 units are…

Microcomputer Applications in Vocational Education: Home Economics. Courseware Evaluation for Vocational and Technical Education.

ERIC Educational Resources Information Center

Sarle, Ruth; And Others

This courseware evaluation rates the "Microcomputer Applications in Vocational Education: Home Economics" program developed by the Illinois State Board of Education. (This series of programs--not contained in this document--includes interior decorating estimating, pounds away program, decision analysis, fiber care, clothing figure…

RESPSYST: An Interactive Microcomputer Program for Education.

ERIC Educational Resources Information Center

Boyle, Joseph

1985-01-01

RESPSYST is a computer program (written in BASICA and using MS-DOS/PC-DOS microcomputers) incorporating more than 20 of the factors that determine gas transport by the cardio-respiratory system. The five-part program discusses most of these factors, provides several question/answer sections, and relies heavily on graphics to demonstrate…

The microcomputer scientific software series 2: general linear model--regression.

Treesearch

Harold M. Rauscher

1983-01-01

The general linear model regression (GLMR) program provides the microcomputer user with a sophisticated regression analysis capability. The output provides a regression ANOVA table, estimators of the regression model coefficients, their confidence intervals, confidence intervals around the predicted Y-values, residuals for plotting, a check for multicollinearity, a...

Microcomputers and the Media Specialist: An Annotated Bibliography.

ERIC Educational Resources Information Center

Miller, Inabeth

An overview of the literature reflecting the rapid development of interest in microcomputer use in education since 1978 is followed by an annotated bibliography which lists books, articles, and ERIC documents in nine categories. The first section includes materials of general interest--historical background, guides to using computers in the…

Development of Microcomputer Simulations for Vocational/Technical Education. Final Report.

ERIC Educational Resources Information Center

Randolph Technical Coll., Asheboro, NC.

A project investigated the feasibility of developing equipment simulations in vocational curricula using videotapes and microcomputers. To conduct the research, two pieces of equipment that could be used in vocational curricula throughout the North Carolina Community College System were chosen: (1) computer numerical control (CNC) lathe used in…

A System for Evaluating Microcomputer Courseware for Vocational and Technical Education. Final Report.

ERIC Educational Resources Information Center

Chase, Shirley A.; And Others

A project was conducted to design a system for evaluating microcomputer courseware for vocational and technical education. Through a literature review and contacts with organizations and individuals involved in courseware evaluation and use, project staff identified and acquired for review documents pertaining to courseware evaulation, vocational…

Microcomputer Hardware. Energy Technology Series.

ERIC Educational Resources Information Center

Technical Education Research Centre-Southwest, Waco, TX.

This course in microcomputer hardware is one of 16 courses in the Energy Technology Series developed for an Energy Conservation-and-Use Technology curriculum. Intended for use in two-year postsecondary technical institutions to prepare technicians for employment, the courses are also useful in industry for updating employees in company-sponsored…

An On-line Microcomputer Course for Pre-service Teachers.

ERIC Educational Resources Information Center

Abkemeier, Mary K.

This paper describes "Microcomputer Applications for Educators," a course at Fontbonne College for pre-service teachers which introduces the educational applications of the computer and related technologies. The course introduces students to the Macintosh computer, its operating system, Claris Works 4.0, and various other educational and…

Use of microcomputers for planning and managing silviculture habitat relationships.

Treesearch

B.G. Marcot; R.S. McNay; R.E. Page

1988-01-01

Microcomputers aid in monitoring, modeling, and decision support for integrating objectives of silviculture and wildlife habitat management. Spreadsheets, data bases, statistics, and graphics programs are described for use in monitoring. Stand growth models, modeling languages, area and geobased information systems, and optimization models are discussed for use in...

The DoD Gateway Information System (DGIS): The DoD Microcomputer User's Gateway to the World.

ERIC Educational Resources Information Center

Kuhn, Allan D.; Cotter, Gladys A.

1988-01-01

Describes the U.S. Department of Defense (DoD) Gateway Information System, which provides communications capabilities and access to online databases for DoD microcomputer end-users. Functions, structure, development, and artificial intelligence applications of the system are discussed. (11 references) (MES)

Deformation of conjugate compliant fault zones induced by the 2013 Mw7.7 Baluchistan (Pakistan) earthquake

NASA Astrophysics Data System (ADS)

Dutta, Rishabh; Wang, Teng; Feng, Guangcai; Harrington, Jonathan; Vasyura-Bathke, Hannes; Jónsson, Sigurjón

2017-04-01

Strain localizations in compliant fault zones (with elastic moduli lower than the surrounding rocks) induced by nearby earthquakes have been detected using geodetic observations in a few cases in the past. Here we observe small-scale changes in interferometric Synthetic Aperture Radar (InSAR) measurements along multiple conjugate faults near the rupture of the 2013 Mw7.7 Baluchistan (Pakistan) earthquake. After removing the main coseismic deformation signal in the interferograms and correcting them for topography-related phase, we observe 2-3 cm signal along several conjugate faults that are 15-30 km from the mainshock fault rupture. These conjugate compliant faults have strikes of N30°E and N45°W. The sense of motion indicates left-lateral deformation across the N30°E faults and right-lateral deformation across the N45°W faults, which suggests the conjugate faults were subjected to extensional coseismic stresses along the WSW-ENE direction. The spacing between the different sets of faults is around 5 to 8 km. We explain the observed strain localizations as an elastic response of the compliant conjugate faults induced by the Baluchistan earthquake. Using 3D Finite Element models (FEM), we impose coseismic static displacements due to the earthquake along the boundaries of the FEM domain to reproduce the coseismic stress changes acting across the compliant faults. The InSAR measurements are used to constrain the geometry and rigidity variations of the compliant faults with respect to the surrounding rocks. The best fitting models show the compliant fault zones to have a width of 0.5 km to 2 km and a reduction of the shear modulus by a factor of 3 to 4. Our study yields similar values as were found for compliant fault zones near the 1992 Landers and the 1999 Hector Mine earthquakes in California, although here the strain localization is occurring on more complex conjugate sets of faults.

Autovibration and chaotic motion of an unbalanced rotor in massive non-linear compliant supports

NASA Astrophysics Data System (ADS)

Pasynkova, I. A.; Stepanova, P. P.

2018-05-01

Stability loss scenarios of an unbalanced rotor with a flexible massless shaft mounted in massive non-linear compliant supports are studied on the example of cylindrical precession. Dyffing type of non-linearity in compliant supports is considered. The system "rotor - supports" has eight degrees of freedom. Internal and external friction are taken into account. Autovibrations and chaotic vibrations are obtained. The results are confirmed by numerical check.

Turbine airfoil with a compliant outer wall

DOEpatents

Campbell, Christian X [Oviedo, FL; Morrison, Jay A [Oviedo, FL

2012-04-03

A turbine airfoil usable in a turbine engine with a cooling system and a compliant dual wall configuration configured to enable thermal expansion between inner and outer layers while eliminating stress formation in the outer layer is disclosed. The compliant dual wall configuration may be formed a dual wall formed from inner and outer layers separated by a support structure. The outer layer may be a compliant layer configured such that the outer layer may thermally expand and thereby reduce the stress within the outer layer. The outer layer may be formed from a nonplanar surface configured to thermally expand. In another embodiment, the outer layer may be planar and include a plurality of slots enabling unrestricted thermal expansion in a direction aligned with the outer layer.

A high accuracy magnetic heading system composed of fluxgate magnetometers and a microcomputer

NASA Astrophysics Data System (ADS)

Liu, Sheng-Wu; Zhang, Zhao-Nian; Hung, James C.

The authors present a magnetic heading system consisting of two fluxgate magnetometers and a single-chip microcomputer. The system, when compared to gyro compasses, is smaller in size, lighter in weight, simpler in construction, quicker in reaction time, free from drift, and more reliable. Using a microcomputer in the system, heading error due to compass deviation, sensor offsets, scale factor uncertainty, and sensor tilts can be compensated with the help of an error model. The laboratory test of a typical system showed that the accuracy of the system was improved from more than 8 deg error without error compensation to less than 0.3 deg error with compensation.

A new microcomputer-based safety and life support system for solitary-living elderly people.

PubMed

Miyauchi, Kosuke; Yonezawa, Yoshiharu; Maki, Hiromichi; Ogawa, Hidekuni; Hahn, Allen W; Caldwell, W Morton

2003-01-01

A new safety and life support system has been developed to detect emergency situations of solitary-living elderly persons. The system employs a dual axis accelerometer, two low-power active filters, a low-power 8-bit single chip microcomputer and a personal handy phone. Body movements due to walking, running and posture changes are detected by the dual axis accelerometer and sent to the microcomputer. If the patient is in an inactive state for 5 minutes after falling, or for 64 minutes without previously falling, then the system automatically alarms the emergency situation, via the personal handy phone, to the patient's family, the fire station or the hospital.

Microcomputer-based Peltier thermostat for precision optical radiation measurements

NASA Astrophysics Data System (ADS)

Zhu, Xiaosong; Krochmann, Eike; Chen, Jiashu

1992-03-01

We have developed a microcomputer-based thermostat for a light measuring head in precision optical radiation measurements. This thermostat consists of a single-chip microcomputer, a digital-to-analog converter, a liquid crystal display, a power operational amplifier, and a Peltier element (thermoelectric cooler). The Peltier element keeps the temperature of the photometer head at 20±0.1 °C in the ambient temperature range from -20 to 60 °C. A control algorithm which combines the ``Bang-Bang'' mode and proportional-plus-integral-plus-derivative mode is used to achieve fast and smooth thermostatic performance. This thermostat is effective, inexpensive, and easy to adjust. Several applications of the Peltier thermostat are mentioned.

[The study of DSX-I type microcomputer autometic control injector system].

PubMed

Shi, M; Wu, G; Bai, G; Xue, J; Zhang, Y

1997-01-01

This paper studies the propulsive force of injector system controlled by 8031 single-chip microcomputer for Medical use By using one 8031 single-chip microcomputer as a microprocessor, the minimal autometic control system is constructed, which turns real-time control into reality. This product is a modern appliance used in diagnostic imaging medicine, in design of which the advanced instrument and electrical machinery are integrated into a unified structure. The clinic data demonstrate that the contrast medium can be injected to patients with rapidly and evenly. Dynamic CT Scanning can be intensified at any site of the body. x-ray dose exposed and lobour intensity to the operator can be decreased greatly, raise working efficiency.

Development of a character, line and point display system. [for medical records

NASA Technical Reports Server (NTRS)

Owen, E. W.

1977-01-01

A compact graphics terminal for use as the input to a computerized medical records system is described. The principal mode of communication between the terminal and the records system is by checklists and menu selection. However, the terminal accepts short, handwritten messages as well as conventional alphanumeric input. The terminal consists of an electronic tablet, a display, a microcomputer controller, a character generator, and a refresh memory for the display. An Intel SBC 80/10 microcomputer controls the flow of information and a 16 kilobyte memory stores the point-by-point array of information to be displayed. A specially designed interface continuously generates the raster display without the intervention of the microcomputer.

CLASSIFY: A Group Teaching Exercise in Microbial Identification and Numerical Taxonomy Using a Commodore 64 Microcomputer.

ERIC Educational Resources Information Center

Soddell, J. A.; Seviour, R. J.

1985-01-01

Describes an exercise which uses a computer program (written for Commodore 64 microcomputers) that accepts data obtained from identifying bacteria, calculates similarity coefficients, and performs single linkage cluster analysis. Includes a program for simulating bacterial cultures for students who should not handle pathogenic microorganisms. (JN)

Enhancing the Attractiveness of Alcohol Education Via a Microcomputer Program.

ERIC Educational Resources Information Center

Meier, Scott T.

Getting students' attention is one of the most difficult problems for counselors who conduct alcohol education programs in high schools or colleges. A computer-aided instruction program using microcomputers for alcohol education was developed entitled "If You Drink: An Alcohol Education Program" (IYD). The IYD program consists of five modules: the…

Microcomputers in Vocational Home Economics Classrooms in USD #512.

ERIC Educational Resources Information Center

Shawnee Mission Public Schools, KS.

A project was conducted to identify software suitable for use in home economics classes and to train home economics teachers to use that software with an Apple II Plus microcomputer. During the project, home economics software was identified, evaluated, and catalogued. Teaching strategies were adapted to include using the computer in the…

Machine Check-Out. Microcomputing Working Paper Series.

ERIC Educational Resources Information Center

Drexel Univ., Philadelphia, PA. Microcomputing Program.

During the academic year 1983-84, Drexel University instituted a new policy requiring all incoming students to have access to a microcomputer. The computer chosen to fulfill this requirement was the Macintosh from Apple Computer, Inc. Because Drexel University received one of the first large shipments of this new product, the degree to which these…

Reference Manual for the Instructional Use of Microcomputers. Volume I (Release II).

ERIC Educational Resources Information Center

Forman, Denyse; And Others

This manual is intended to provide educators with information and guidelines for locating, selecting, and purchasing commercially available courseware for the Apple II microcomputer. A courseware index is provided which lists programs in broad subject areas and grade levels. Information given for each program includes its DOS, language, cost,…

Using Microcomputers Simulations in the Classroom: Examples from Undergraduate and Faculty Computer Literacy Courses.

ERIC Educational Resources Information Center

Hart, Jeffrey A.

1985-01-01

Presents a discussion of how computer simulations are used in two undergraduate social science courses and a faculty computer literacy course on simulations and artificial intelligence. Includes a list of 60 simulations for use on mainframes and microcomputers. Entries include type of hardware required, publisher's address, and cost. Sample…

Microcomputer Materials from MEP. An Annotated Directory of Packages of Interest to Further Education. An Occasional Paper.

ERIC Educational Resources Information Center

Gilbert, Leslie

Designed to disseminate information to the post-school sector of United Kingdom education, this directory provides information on 50 microcomputer software packages developed by the Microelectronics Education Program (MEP) and available through educational publishers. Subject areas represented include accountancy, biology, business education,…

Development and Evaluation of the SUMIT Microcomputer Module Entitled 'Predator Functional Response'.

ERIC Educational Resources Information Center

Shaltz, Mark B.

An experiment was conducted that compared the teaching effectiveness of a computer assisted instructional module and a lecture-discussion. The module, Predator Functional Response (PFR), was developed as part of the SUMIT (Single-concept User-adaptable Microcomputer-based Instructional Technique) project. A class of 30 students was randomly…

Designing a Decision Support System (DSS) for Academic Library Managers Using Preprogrammed Application Software on a Microcomputer.

ERIC Educational Resources Information Center

McDonald, Joseph

1986-01-01

Focusing on management decisions in academic libraries, this article compares management information systems (MIS) with decision support systems (DSS) and discusses the decision-making process, information needs of library managers, sources of data, reasons for choosing microcomputer, preprogrammed application software, prototyping a system, and…

Dumping Low and High Resolution Graphics on the Apple IIe Microcomputer System.

ERIC Educational Resources Information Center

Fletcher, Richard K., Jr.; Ruckman, Frank, Jr.

This paper discusses and outlines procedures for obtaining a hard copy of the graphic output of a microcomputer or "dumping a graphic" using the Apple Dot Matrix Printer with the Apple Parallel Interface Card, and the Imagewriter Printer with the Apple Super Serial Interface Card. Hardware configurations and instructions for high…

Do We Really Know What Makes Educational Software Effective? A Call for Empirical Research on Effectiveness.

ERIC Educational Resources Information Center

Jolicoeur, Karen; Berger, Dale E.

1986-01-01

Examination of methods used by two software review services in evaluating microcomputer courseware--EPIE (Educational Products Information Exchange) and MicroSIFT (Microcomputer Software and Information for Teachers)--found low correlations between their recommendations for 82 programs. This lack of agreement casts doubts on the usefulness of…

Executive Decision Making: Using Microcomputers in Budget Planning.

ERIC Educational Resources Information Center

Hoffman, Roslyn; Robinson, Lucinda

The successful integration of microcomputer support to help prepare for an anticipated budget crisis at the University of Illinois at Chicago is described. The IBM Personal Computer and VisiCalc software were key tools in the decision support system. When campus executives were instructed to cut budgets and reallocate funds to produce a…

Missouri Library Connection: A Beginner's Guide to the Bibliofile/Microcomputer System.

ERIC Educational Resources Information Center

Raithel, Frederick J.; Foster, Paul

In 1988, the Missouri State Library offered microcomputers to Missouri public libraries to help them implement a retrospective conversion of their cataloging system to an online system called Bibliofile. The goal of the State Library was to create and maintain a Union Catalog for Missouri libraries. This guide provides Missouri library personnel…

High Technology in the Vocational Agriculture Classroom.

ERIC Educational Resources Information Center

Camp, William G.

While many aspects of high technology may be directly applicable in the vocational agricultural classroom, the primary thrust of high technology into such programs, at least in the short range, will be centered around the microcomputer. Because of its cost and availability, the microcomputer will continue to play an ever increasing role in…

Libraries in the Information Age: Where Are the Microcomputer and Laser Optical Disc Technologies Taking Us?

ERIC Educational Resources Information Center

Chen, Ching-chih

1986-01-01

This discussion of information technology and its impact on library operations and services emphasizes the development of microcomputer and laser optical disc technologies. Libraries' earlier responses to bibliographic utilities, online databases, and online public access catalogs are described, and future directions for library services are…

Microcomputer-Based Access to Machine-Readable Numeric Databases.

ERIC Educational Resources Information Center

Wenzel, Patrick

1988-01-01

Describes the use of microcomputers and relational database management systems to improve access to numeric databases by the Data and Program Library Service at the University of Wisconsin. The internal records management system, in-house reference tools, and plans to extend these tools to the entire campus are discussed. (3 references) (CLB)

Evaluation of Electronic Counter-Countermeasures Training Using Microcomputer-Based Technology: Phase I. Basic Jamming Recognition.

ERIC Educational Resources Information Center

Gardner, Susan G.; Ellis, Burl D.

Seven microcomputer-based training systems with videotape players/monitors were installed to provide electronic counter-countermeasures (ECCM) simulation training, drill and practice, and performance testing for three courses at a fleet combat training center. Narrated videotape presentations of simulated and live jamming followed by a drill and…

Computer Series, 52: Scientific Exploration with a Microcomputer: Simulations for Nonscientists.

ERIC Educational Resources Information Center

Whisnant, David M.

1984-01-01

Describes two simulations, written for Apple II microcomputers, focusing on scientific methodology. The first is based on the tendency of colloidal iron in high concentrations to stick to fish gills and cause breathing difficulties. The second, modeled after the dioxin controversy, examines a hypothetical chemical thought to cause cancer. (JN)

Integrating Computers into the Accounting Curriculum Using an IBM PC Network. Final Report.

ERIC Educational Resources Information Center

Shaoul, Jean

Noting the increased use of microcomputers in commerce and the accounting profession, the Department of Accounting and Finance at the University of Manchester recognized the importance of integrating microcomputers into the accounting curriculum and requested and received a grant to develop an integrated study environment in which students would…

Microcomputer Usage in Secondary Marketing Education. A National Study.

ERIC Educational Resources Information Center

Searle, A. Gary

A study was conducted to determine microcomputer hardware, software, and inservice components of secondary marketing education programs. A questionnaire was developed and sent to 420 teacher-coordinators in 42 states. A total of 225 (54 percent) usable returns were tabulated at the University of Wisconsin-Stout Computer Center. Results of the…

Microcomputers in Schools as a Teaching and Learning Aid.

ERIC Educational Resources Information Center

Trotman-Dickenson, D. I.

1986-01-01

Presents the findings of a survey of comprehensive and independent schools' use of microcomputers as teaching and learning aids in economics. Results suggest that use is wide spread but not intensive. Teachers allocate few hours to computer programs per year, have difficulty finding suitable software, and fail to encourage use by girls. (JDH)

Microcomputers in Agriculture. A Resource Guide for California Community College Faculty in Agriculture & Natural Resources. Update.

ERIC Educational Resources Information Center

California Community Colleges, Sacramento. Office of the Chancellor.

This resource guide contains descriptions of microcomputer programs that are suitable for use in community college courses in agriculture and natural resources. Product descriptions are organized according to the following subject areas: agricultural business, animal production, farm mechanics, farm management, forestry and natural resources,…

Prospects and Challenges for Using Microcomputers in School. Technical Report No. 7.

ERIC Educational Resources Information Center

Pea, Roy D.

Prepared as an address for educator groups, this paper provides a theoretical perspective for thinking about problems and prospects for integrating microcomputer uses in school activities. Six major aspects of the perspective are defined: (1) the computer as general-purpose symbolic device; (2) the importance of developmental studies of children's…

Microcomputers for Young Children: Procedures and Practices in the Laboratory Classroom.

ERIC Educational Resources Information Center

Baker, Betty Ruth

These guidelines are designed to give preservice teachers information to use in selecting techniques and planning learning experiences for young children in the microcomputer laboratory. The main purpose of this laboratory experience is for children to develop computer awareness/literacy and keyboard knowledge, and to improve skills in following…

Information Retrieval System Design Issues in a Microcomputer-Based Relational DBMS Environment.

ERIC Educational Resources Information Center

Wolfram, Dietmar

1992-01-01

Outlines the file structure requirements for a microcomputer-based information retrieval system using FoxPro, a relational database management system (DBMS). Issues relating to the design and implementation of such systems are discussed, and two possible designs are examined in terms of space economy and practicality of implementation. (15…

Preparing the Faculty. Faculty Development for the Microcomputing Program.

ERIC Educational Resources Information Center

Drexel Univ., Philadelphia, PA. Microcomputing Program.

The preparation of Drexel University faculty for the introduction of a microcomputing program is described. Faculty training had to be done on a variety of levels, from basic training in computer operation for the novice to advanced training in highly technical procedures and languages. Maximum faculty participation was sought throughout the…

MicroSIFT Courseware Evaluations (169-198). Set 9. Including Subject and Title Indexes Covering Sets 1-9.

ERIC Educational Resources Information Center

Weaver, Dave, Ed.

This document consists of 30 microcomputer software package evaluations prepared for the MicroSIFT (Microcomputer Software and Information for Teachers) Clearinghouse at the Northwest Regional Educational Laboratory (NWREL). The concise, single-sheet resume describing and evaluating each software package includes source, cost, ability level,…

MicroSIFT Courseware Evaluations (199-222). Set 10. Including Subject and Title Indexes Covering Sets 1-10.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This document consists of 24 microcomputer software package evaluations prepared by the MicroSIFT (Microcomputer Software and Information for Teachers) Clearinghouse at the Northwest Regional Educational Laboratory. Each software review lists source, cost, ability level, subject, topic, medium of transfer, required hardware, required software,…

Library Micro-Computing, Vol. 2. Reprints from the Best of "ONLINE" [and]"DATABASE."

ERIC Educational Resources Information Center

Online, Inc., Weston, CT.

Reprints of 19 articles pertaining to library microcomputing appear in this collection, the second of two volumes on this topic in a series of volumes of reprints from "ONLINE" and "DATABASE" magazines. Edited for information professionals who use electronically distributed databases, these articles address such topics as: (1)…

Design of a Microcomputer-Based Adaptive Testing System.

ERIC Educational Resources Information Center

Vale, C. David

This paper explores the feasibility of developing a single-user microcomputer-based testing system. Testing literature was surveyed to discover types of test items that might be used in the system and to compile a list of strategies that such a system might use. Potential users were surveyed. Several were interviewed, and a questionnaire was…

GRASP - A Prototype Interactive Graphic Sawing Program - (Forest Products Journal)

Treesearch

Luis G. Occeña; Daniel L. Schmoldt

1996-01-01

A versatile microcomputer-based interactive graphics sawing program has been developed as a tool for modeling various hardwood processes, from bucking and topping to log sawing, lumber edging, secondary processing, and even veneering. The microcomputer platform makes the tool affordable and accessible. A solid modeling basis provides the tool with a sound geometrical...

Interface Circuits for Self-Checking Microprocessors

NASA Technical Reports Server (NTRS)

Rennels, D. A.; Chandramouli, R.

1986-01-01

Fault-tolerant-microcomputer concept based on enhancing "simple" computer with redundancy and self-checking logic circuits detect hardware faults. Interface and checking logic and redundant processors confer on 16-bit microcomputer ability to check itself for hardware faults. Checking circuitry also checks itself. Concept of self-checking complementary pairs (SCCP's) employed throughout ICL unit.

Microcomputer Database Management Systems that Interface with Online Public Access Catalogs.

ERIC Educational Resources Information Center

Rice, James

1988-01-01

Describes a study that assessed the availability and use of microcomputer database management interfaces to online public access catalogs. The software capabilities needed to effect such an interface are identified, and available software packages are evaluated by these criteria. A directory of software vendors is provided. (4 notes with…

Learning Together: Micro-Computers in Crosby, Texas, Schools.

ERIC Educational Resources Information Center

McNeil, Linda M.

The Crosby Independent School District near Houston, Texas, planned to introduce microcomputer instruction to its nearly 3,000 students in slow stages that had teachers and students learning at the same time. The initial impetus for computers came from an administrator who found useful information at a Regional Service Center of the State…

The Microcomputer--A Problem Solving Tool.

ERIC Educational Resources Information Center

Hoelscher, Karen J.

Designed to assist teachers in using the microcomputer as a tool to teach problem solving strategies, this document is divided into two sections: the first introduces the concept of problem solving as a thinking process, and suggests means by which a teacher can become an effective guide for the learning of problem solving skills; the second…

Letter from Hong Kong: A Report on Chinese Food, Fake Apples, and IBM's Asian Strategy.

ERIC Educational Resources Information Center

Immel, A. Richard

1984-01-01

Notes that microcomputer use in Hong Kong's small business community does not reflect the growth of its high-tech electronics industry and discusses IBM's influence in Hong Kong and Asia, the counterfeiting of Apple microcomputers and software, and why Apple currently has no recourse. (MBR)

A Practical Application of Microcomputers to Control an Active Solar System.

ERIC Educational Resources Information Center

Goldman, David S.; Warren, William

1984-01-01

Describes the design and implementation of a microcomputer-based model active solar heating system. Includes discussions of: (1) the active solar components (solar collector, heat exchanger, pump, and fan necessary to provide forced air heating); (2) software components; and (3) hardware components (in the form of sensors and actuators). (JN)

Measuring Children's Attention Span: A Microcomputer Assessment Technique.

ERIC Educational Resources Information Center

Murphy-Berman, Virginia; And Others

1986-01-01

A microcomputer technique was used to measure the attention span of 115 boys and 117 girls in kindergarten through the ninth grade. Attentional ability increased only up through the fifth grade, and both the false alarm rate and the interstimulus interval scores were related to behavioral activity during test sessions. (Author/CB)

Microcomputer Resource Guide for Vocational Administrators.

ERIC Educational Resources Information Center

Georgia State Univ., Atlanta. Center for Vocational Leadership.

This guide is intended to assist vocational supervisors in expanding their knowledge of microcomputers and to provide resources to assist them in working with their faculty. Section I presents competencies deemed necessary for an administrator to use the computer as a tool in the conduct of his/her job. Section II focuses on planning for…

Ideas for Integrating the Microcomputer into Science Instruction.

ERIC Educational Resources Information Center

Pollard, Jim, Ed.

Much of the innovation in the use of microcomputers in education has come from classroom teachers who are using computers with students. In October, 1987, forums were held for secondary school science teachers who were using computers in their science classes. Within this document are some of the lesson plans that the participating teachers…

A Methodical Approach to the Creation, Operation, and Enhancement of a General-use Microcomputer Laboratory.

ERIC Educational Resources Information Center

Seilheimer, Steven D.

1988-01-01

Outlines procedures for developing a microcomputer laboratory for use by students in an academic organization, based on experiences at Niagara University. The four phases described include: (1) needs assessment; (2) establishment, including software and hardware selection and physical facilities; (3) operation, including staffing, maintenance,…

Microcomputer Keyboarding Curriculum for Middle and Junior High School Students. Final Report.

ERIC Educational Resources Information Center

Regional School District No. 10, Burlington, CT.

This project report describes the development of a seventh-grade curriculum to promote microcomputer keyboarding skills, i.e., learning correct alpha-numeric reaches, developing proficiency in making appropriate reaches, using correct fingering without looking at the keyboard, and attaining a degree of speed and accuracy. Although the curriculum…

Microcomputer Usage in Schools, 1983-84.

ERIC Educational Resources Information Center

Quality Education Data, Inc., Denver, CO.

Results are presented for the third annual survey of all United States school districts by Quality Education Data, Inc. Findings are displayed in tabular form, and include information on the following: size of the microcomputer marketplace and the kinds of people involved; availability of software by brand for home, business, and education use;…

Interactive Microcomputer Videotape Software for Vocational Agriculture Programs in Secondary Schools. Final Report.

ERIC Educational Resources Information Center

Texas Tech Univ., Lubbock.

The purpose of the project described in this report was to investigate the feasibility of interactive microcomputer/videotape software for use in Texas vocational agriculture programs. An extensive literature review was conducted to determine the value of videotaped and interactive videotaped lessons and to check what equipment and programs were…

Microcomputer-Analyzed Initial Rate Kinetics of the Benzene-Enhanced Unfolding of Myoglobin: A Biophysical Chemistry Experiment.

ERIC Educational Resources Information Center

Schuh, Merlyn D.

1988-01-01

Describes a biophysical chemistry experiment that introduces students to globular protein conformation and microcomputer analysis of initial rate data for the unfolding of proteins. Presents background, materials needed and methodology. Uses a visible spectrometer for analysis. Lists educational benefits derived from the experiment. (ML)

GRASP - A Prototype Interactive Graphic Sawing Program - (MU-IE Technical Report)

Treesearch

Luis G. Occeña; Daniel L. Schmoldt

1995-01-01

A versatile microcomputer-based interactive graphics program has been developed as a tool for modeling various hardwood processes, from bucking and topping to log sawing, lumber edging, secondary processing, even veneering. The microcomputer platform makes the tool affordable and accessible.A solid modeling basis provides the tool with a sound geometrical and...

The Role of the Microcomputer-Based Laboratory Display in Supporting the Construction of New Understandings in Kinematics.

ERIC Educational Resources Information Center

Russell, David W.; Lucas, Keith B.; McRobbie, Campbell J.

2003-01-01

Investigates how microcomputer-based laboratory (MBL) activities specifically designed to be consistent with a constructivist theory of learning support or constrain student construction of understanding. Analysis of students' discourse and actions reveal that students invented numerous techniques for manipulating data in the service of their…

Out of the Shoebox: Publishing a Regional Periodical Index Using a Microcomputer.

ERIC Educational Resources Information Center

Schmidt, Jean M.; Wilson, John S.

1988-01-01

Describes production of the Bayou State Periodical Index, an index of Louisiana periodicals designed to provide access to information on local topics, and offers guidelines for producing such an index in a timely fashion with limited funds, using a microcomputer. Planning, procedures, financing, and publicity and marketing are covered. (seven…

Microcomputers, Software and Foreign Languages for Special Purposes: An Analysis of TXTPRO.

ERIC Educational Resources Information Center

Tang, Michael S.

TXTPRO, a computer program developed as a graduate-level research tool for descriptive linguistic analysis, produces simple alphabetic and word frequency lists, analyzes word combinations, and develops concordances. With modifications, a teacher could enter the program into a mainframe or a microcomputer and use it for text analyses to develop…

ASCAL: A Microcomputer Program for Estimating Logistic IRT Item Parameters.

ERIC Educational Resources Information Center

Vale, C. David; Gialluca, Kathleen A.

ASCAL is a microcomputer-based program for calibrating items according to the three-parameter logistic model of item response theory. It uses a modified multivariate Newton-Raphson procedure for estimating item parameters. This study evaluated this procedure using Monte Carlo Simulation Techniques. The current version of ASCAL was then compared to…

School Microware: A Directory of Educational Software. Over 500 Programs/Packages for APPLE, PET, TRS-80.

ERIC Educational Resources Information Center

Dresden Associates, Dresden, ME.

This preliminary directory represents the offerings of 45 software suppliers and information about instructional software currently available for three microcomputers widely used in schools. It is geared towards a wide variety of users including school planners contemplating microcomputer acquisition, teachers planning courses and curricula, media…

Computers in the Home Economics Classroom.

ERIC Educational Resources Information Center

Browning, Ruth; Durbin, Sandra

This guide for teachers focuses on how microcomputers may be used in the home economics classroom and how the computer is affecting and changing family life. A brief discussion of potential uses of the microcomputer in educational settings is followed by seven major sections. Sections 1 and 2 provide illustrations and definitions for microcomputer…