30 CFR 57.14201 - Conveyor start-up warnings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Conveyor start-up warnings. 57.14201 Section 57... Equipment Safety Practices and Operational Procedures § 57.14201 Conveyor start-up warnings. (a) When the... audible warning shall be installed and operated to warn persons that the conveyor will be started. Within...

30 CFR 56.14201 - Conveyor start-up warnings.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Conveyor start-up warnings. 56.14201 Section 56... Equipment Safety Practices and Operational Procedures § 56.14201 Conveyor start-up warnings. (a) When the... audible warning shall be installed and operated to warn persons that the conveyor will be started. Within...

Start-Up Entrepreneurs and University Students in a Co-Learning Mode: Learning Effects of a Collaborative Entrepreneurial Coaching Programme

ERIC Educational Resources Information Center

Saukkonen, Juha; Nukari, Jussi; Ballard, Sharon; Levie, Jonathan

2016-01-01

Start-up companies have been recognized as key drivers of wealth and job creation. Many students now in universities will therefore find their future employment in start-up companies, or will found them. Success in the start-up environment requires a specific set of skills. There is a growing supply of university education for new venture creation…

A novel transient wall heat transfer approach for the start-up of SI engines with gasoline direct injection

NASA Astrophysics Data System (ADS)

Lejsek, David; Kulzer, André; Hammer, Jürgen

2010-11-01

The introduction of CO2-reduction technologies like Start-Stop or the Hybrid-Powertrain and the worldwide stringent emission legislation require a detailed optimization of the engine start-up. The combustion concept development as well as the calibration of the engine control unit makes an explicit thermodynamic analysis of the combustion process during the start-up necessary. Initially, the well-known thermodynamic analysis of in-cylinder pressure at stationary condition was transmitted to the highly non-stationary engine start-up. For this running mode of the engine the current models for calculation of the transient wall heat fluxes were found to be misleading. With a fraction of nearly 45% of the burned fuel energy, the wall heat is very important for the calculation of energy balance and for the combustion process analysis. Based on the measurements of transient wall heat transfer densities during the start-up presented in a former work (Lejsek and Kulzer in Investigations on the transient wall heat transfer at start-up for SI engines with gasoline direct injection. SAE Paper), the paper describes the development of adaptations to the known correlations by Woschni (MTZ 31:491, 1970), Hohenberg (Experimentelle Erfassung der Wandwärme von Kolbenmotoren. TU Graz, Habil., 1980) and Bargende (Ein Gleichungsansatz zur Berechnung der instationären Wandwärmeverluste im Hochdruckteil von Ottomotoren. TH Darmstadt, PhD-Thesis, 1991) for the application during engine start-up. To demonstrate the high accuracy of the model, the results of the cyclic resolved thermodynamic analysis using the presented novel approaches were compared with the results of the measurements. It is shown, that the novel heat flux models for the engine start-up process gives a cyclic resolved thermodynamic analysis to optimize the engine start-up pretty efficient.

76 FR 50887 - Elections Regarding Start-Up Expenditures, Corporation Organizational Expenditures, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... begins an active trade or business, an amount equal to the lesser of (1) the amount of the start-up... begins. All start-up expenditures that relate to the active trade or business are considered in... active trade or business to which the expenditures relate begins. The election either to amortize start...

Optimization of Passive Voltage Multipliers for Fast Start-up and Multi-voltage Power Supplies in Electromagnetic Energy Harvesting Systems

NASA Astrophysics Data System (ADS)

Yang, G.; Stark, B. H.; Burrow, S. G.; Hollis, S. J.

2014-11-01

This paper demonstrates the use of passive voltage multipliers for rapid start-up of sub-milliwatt electromagnetic energy harvesting systems. The work describes circuit optimization to make as short as possible the transition from completely depleted energy storage to the first powering-up of an actively controlled switched-mode converter. The dependency of the start-up time on component parameters and topologies is derived by simulation and experimentation. The resulting optimized multiplier design reduces the start-up time from several minutes to 1 second. An additional improvement uses the inherent cascade structure of the voltage multiplier to power sub-systems at different voltages. This multi-rail start-up is shown to reduce the circuit losses of the active converter by 72% with respect to the optimized single-rail system. The experimental results provide insight into the multiplier's transient behaviour, including circuit interactions, in a complete harvesting system, and offer important information to optimize voltage multipliers for rapid start-up.

University Start-ups: A Better Business Model

NASA Astrophysics Data System (ADS)

Dehn, J.; Webley, P. W.

2015-12-01

Many universities look to start-up companies as a way to attract faculty, supporting research and students as traditional federal sources become harder to come by. University affiliated start-up companies can apply for a broader suite of grants, as well as market their services to a broad customer base. Often university administrators see this as a potential panacea, but national statistics show this is not the case. Rarely do universities profit significantly from their start-ups. With a success rates of around 20%, most start-ups end up costing the university money as well as faculty-time. For the faculty, assuming they want to continue in academia, a start-up is often unattractive because it commonly leads out of academia. Running a successful business as well as maintaining a strong teaching and research load is almost impossible to do at the same time. Most business models and business professionals work outside of academia, and the models taught in business schools do not merge well in a university environment. To mitigate this a new business model is proposed where university start-ups are aligned with the academic and research missions of the university. A university start-up must work within the university, directly support research and students, and the work done maintaining the business be recognized as part of the faculty member's university obligations. This requires a complex conflict of interest management plan and for the companies to be non-profit in order to not jeopardize the university's status. This approach may not work well for all universities, but would be ideal for many to conserve resources and ensure a harmonious relationship with their start-ups and faculty.

Business Angels - A Subspecies of the homo oeconomicus ludens.

PubMed

Hüsler, Laurenz; Platzer, Erich M

2014-12-01

Business Angels invest in start-up companies in their early stage. This type of investor usually has a good knowledge of the start-up's industry sector, and in addition to the funds he invests, his management experience and his network can be useful for start-ups. Business Angel involvement has shown to improve the success rate and the profitability of start-ups. The article depicts the relationship between entrepreneurs and Business Angels in four case examples.

A single center analysis of factors influencing study start-up timeline in clinical trials.

PubMed

Krafcik, Brianna M; Doros, Gheorghe; Malikova, Marina A

2017-11-01

Efficient start-up phase in clinical trials is crucial to execution. The goal was to determine factors contributing to delays. The start-up milestones were assessed for 38 studies and analyzed. Total start-up time was shorter for following studies: device trials, no outsourcing, fewer ancillary services used and in interventional versus observational designs. The use of a centralized Institutional Review Board (IRB) versus a local IRB reduced time to approval. Studies that never enrolled took longer on average to finalize their budget/contract, and obtain IRB than ones that did enroll. Different features of clinical trials can affect timeline of start-up process. An understanding of the impact of each feature allows for optimization.

Start-Up of an Anaerobic Dynamic Membrane Digester for Waste Activated Sludge Digestion: Temporal Variations in Microbial Communities

PubMed Central

Yu, Hongguang; Wang, Qiaoying; Wang, Zhiwei; Sahinkaya, Erkan; Li, Yongli; Ma, Jinxing; Wu, Zhichao

2014-01-01

An anaerobic dynamic membrane digester (ADMD) was developed to digest waste sludge, and pyrosequencing was used to analyze the variations of the bacterial and archaeal communities during the start-up. Results showed that bacterial community richness decreased and then increased over time, while bacterial diversity remained almost the same during the start-up. Proteobacteria and Bacteroidetes were the major phyla. At the class level, Betaproteobacteria was the most abundant at the end of start-up, followed by Sphingobacteria. In the archaeal community, richness and diversity peaked at the end of the start-up stage. Principle component and cluster analyses demonstrated that archaeal consortia experienced a distinct shift and became stable after day 38. Methanomicrobiales and Methanosarcinales were the two predominant orders. Further investigations indicated that Methanolinea and Methanosaeta were responsible for methane production in the ADMD system. Hydrogenotrophic pathways might prevail over acetoclastic means for methanogenesis during the start-up, supported by specific methanogenic activity tests. PMID:24695488

Emission characteristics and vapour/particulate phase distributions of PCDD/F in a hazardous waste incinerator under transient conditions

PubMed Central

Wang, Chao; Cen, Kefa; Ni, Mingjiang; Li, Xiaodong

2018-01-01

Polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (PCDD/F) emission characteristics and vapour/particulate phase partitions under three continued operation conditions, i.e. shut-down, start-up and after start-up, were investigated by sampling stack gas. The results indicated that the PCDD/F emission levels were 0.40–18.03 ng I-TEQ Nm−3, much higher than the annual monitoring level (0.016 ng I-TEQ Nm−3). Additionally, the PCDD/F emission levels in start-up were higher than the other two conditions. Furthermore, the PCDD/F congener profiles differed markedly between shut-down and start-up, and the chlorination degree of PCDD/F increased in shut-down and decreased evidently in start-up. Moreover, PCDD/F vapour/particulate phase distributions varied significantly under three transient conditions. The PCDD/F vapour phase proportion decreased as the shut-down process continued, then increased as the start-up process proceeded, finally more than 98% of the PCDD/F congeners were distributed in the vapour phase after start-up. The correlations between log(Cv/Cs) versus log pL0 of each PCDD/F congener in stack gas were disorganized in shut-down, and trend to a linear distribution after start-up. Besides, polychlorinated biphenyl emissions show behaviour similar to that of PCDD/F, and the lower chlorinated congeners have a stronger relationship with 2,3,7,8-PCDD/Fs, such as M1CB and D2CB. PMID:29410821

"Size Matters": Women in High Tech Start-Ups

NASA Astrophysics Data System (ADS)

Lackritz, Hilary

2001-03-01

For those who want constant excitement, change, and rapid opportunities to have an impact in the technical world, start-up companies offer wonderful challenges. This talk will focus realistically on rewards and risks in the start-up world. An outline of the differences between the high tech start-ups and the academic and consulting worlds from a personal viewpoint will be presented. Size usually does matter, and in this case, small size can equal independence, entrepreneurship, and other advantages that are hard to come by in Dilbert’s corporate world.

Mathematical modeling and analysis of heat pipe start-up from the frozen state

NASA Technical Reports Server (NTRS)

Jang, Jong Hoon; Faghri, Amir; Chang, Won Soon; Mahefkey, Edward T.

1989-01-01

The start-up process of a frozen heat pipe is described and a complete mathematical model for the start-up of the frozen heat pipe is developed based on the existing experimental data, which is simplified and solved numerically. The two-dimensional transient model for the wall and wick is coupled with the one-dimensional transient model for the vapor flow when vaporization and condensation occur at the interface. A parametric study is performed to examine the effect of the boundary specification at the surface of the outer wall on the successful start-up from the frozen state. For successful start-up, the boundary specification at the outer wall surface must melt the working substance in the condenser before dry-out takes place in the evaporator.

Mathematical modeling and analysis of heat pipe start-up from the frozen state

NASA Technical Reports Server (NTRS)

Jang, J. H.; Faghri, A.; Chang, W. S.; Mahefkey, E. T.

1990-01-01

The start-up process of a frozen heat pipe is described and a complete mathematical model for the start-up of the frozen heat pipe is developed based on the existing experimental data, which is simplified and solved numerically. The two-dimensional transient model for the wall and wick is coupled with the one-dimensional transient model for the vapor flow when vaporization and condensation occur at the interface. A parametric study is performed to examine the effect of the boundary specification at the surface of the outer wall on the successful start-up from the frozen state. For successful start-up, the boundary specification at the outer wall surface must melt the working substance in the condenser before dry-out takes place in the evaporator.

[Study on the start-up of anaerobic ammonium oxidation process in biological activated carbon reactor].

PubMed

Lai, Wei-Yi; Zhou, Wei-Li; He, Sheng-Bing

2013-08-01

In order to shorten the start-up time of anaerobic ammonium oxidation (ANAMMOX) reactor, biological activated cabon reactor was applied. Three lab scale UASB reactors were seeded with anaerobic sludge, fed with synthetic wastewater containing ammonia and nitrite, and supplemented with granular activated carbon on day 0, 33 and 56, respectively. The nitrogen removal performance of the first reactor, into which GAC was added on day 0, showed no significant improvement in 90 days. After being suspended for about one month, the secondary start-up of this reactor succeeded in another 33 days (totally 123 days). 49 d and 85 d were taken for the other two reactors started up by the addition of GAC on day 33 and 56, respectively. After the reactors were started up, the average removal rates of total nitrogen were 89.8%, 86.7% and 86.7%, respectively. The start-up process could be divided into four stages, namely, the bacterial autolysis phase, the lag phase, the improve phase and the stationary phase, and the best time for adding GAC carrier was right after the start of the lag phase.

Navigating the Interface between Design Education and Fashion Business Start-up

ERIC Educational Resources Information Center

Mills, Colleen E.

2012-01-01

Purpose: The purpose of this paper is to address the interface between design education and business start-up in the designer fashion industry (DFI) and provide a new framework for reflecting on ways to improve design education and graduates' business start-up preparedness. Design/methodology/approach: This interpretive study employed…

Help Wanted: Exploring the Value of Entrepreneurial Mentoring at Start-Up

ERIC Educational Resources Information Center

Brodie, Jacqueline; Van Saane, Sebastiaan Huib; Osowska, Renata

2017-01-01

The purpose of the research presented in this article was to investigate the added value of mentoring for entrepreneurs during the start-up phase. This small-scale exploratory research focused on five start-up entrepreneurs in Scotland to determine the entrepreneurs' perceptions regarding the "added" value of their mentoring support. To…

The Phenomenon of Business Start-Ups.

ERIC Educational Resources Information Center

Melis, Africa

1990-01-01

A study of four European countries (France, United Kingdom, Italy, and Spain) was conducted to gather data on the business start-up process and its impact on the generation of jobs, small business start-up support programs, training and counseling programs, and characteristics of successful business starters. (The original aim of the study was to…

Start-Up Training in Mississippi: Program Development Guide.

ERIC Educational Resources Information Center

Brooks, Kent; And Others

Due to recent industrial growth in Mississippi and the shortage of trained manpower in numerous occupations, start-up training programs have originated to provide a pretrained work force for new or expanding industry in the State. Each start-up training program is a joint effort between a new or expanding industry and a public educational…

Start-Up Costs in American Research Universities.

ERIC Educational Resources Information Center

Ehrenberg, Ronald G.; Rizzo, Michael J.; Condie, Scott S.

This report briefly summarizes findings from the 2002 Cornell Higher Education Research Institute survey of start-up costs at the over 220 universities classified as research and doctoral universities by the Carnegie Foundation in 1994. It reports the mean start-up cost packages across institutions for new assistant professors and senior faculty,…

Start-up analysis for marketing strategy.

PubMed

Griffith, M J; Baloff, N

1984-01-01

The complex start-up effect on utilization of health care services is too often overlooked or underestimated by marketing planners, leading to a range of negative consequences for both the users of services and the provider organization. Start-up analysis allows accurate estimation of these utilization effects for coordinated strategic planning among marketing finance, and operations.

NREL Document Profiles Natural Gas Fueling, Fleet Operation

Science.gov Websites

, Waste Management's LNG Truck Fleet Start-Up Experience, offers solid evidence that LNG-powered vehicles program from concept to start-up to present-day operation, describing the vehicle, engine and fueling . The document Waste Management's LNG Truck Fleet Start-Up Experience is one of a series of NREL

Assessment of emissions and removal of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) at start-up periods in a hazardous waste incinerator.

PubMed

Karademir, Aykan; Korucu, M Kemal

2013-07-01

A study was conducted to observe the changes in polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F) levels and congener profiles in the flue gas of a hazardous waste incinerator during two start-up periods. Flue gas samplings were performed simultaneously through Air Pollution Control Devices (APCDs) (including boiler outlet, electrostatic precipitator (ESP) outlet, wet scrubbers (WS) outlet, and activated carbon (AC) filter outlet) in different combustion temperatures during a planned cold (long) start-up and an unplanned warm (short) start-up. The results showed that PCDD/F concentrations could be elevated during the start-up periods up to levels 3-4 times higher than those observed in the normal operation. Especially lower combustion temperatures in the short start-ups may cause high PCDD/F concentrations in the raw flue gas. Assessment of combustion temperatures and Furans/Dioxins values indicated that surface-catalyzed de novo synthesis was the dominant pathway in the formation of PCDD/Fs in the combustion units. PCDD/F removal efficiencies of Air Pollution Control Devices suggested that formation by de novo synthesis existed in ESP also when in operation, leading to increase of gaseous phase PCDD/Fs in ESP Particle-bound PCDD/Fs were removed mainly by ESP and WS, while gaseous phase PCDD/Fs were removed by WS, and more efficiently by AC filter. This paper evaluates PCDD/F emissions and removal performances of APCDs (ESP, wet scrubbers, and activated carbon) during two start-up periods in an incinerator. The main implications are the following: (1) start-up periods increase PCDD/F emissions up to 2-3 times in the incinerator; (2) low combustion temperatures in start-ups cause high PCDD/F emissions in raw gas; (3) formation of PCDD/Fs by de novo synthesis occurs in ESP; (4) AC is efficient in removing gaseous PCDD/Fs, but may increase particle-bound ones; and (5) scrubbers remove both gaseous and particle-bound PCDD/Fs efficiently.

Leadership toward Creativity in Virtual Work in a Start-Up Context

ERIC Educational Resources Information Center

Humala, Iris Annukka

2015-01-01

Purpose: This paper aims to better understand how to lead toward creativity in virtual work in a start-up context. Design/methodology/approach: The study investigates the participants' experiences about the learning challenges in leadership toward creativity in virtual work in a start-up company and the meanings attributed to their experiences,…

Manual of Considerations and Techniques for Start-Up of Municipal Wastewater Treatment Facilities.

ERIC Educational Resources Information Center

Rader, R. D.; And Others

This manual provides guidance for putting into initial operation a new municipal wastewater treatment plant, a new addition to an existing treatment plant, or a change in the mode of a treatment plant's operation. Information is provided on preparing for actual treatment plant start-up. Preparation for start-up includes: staffing the plant,…

Resourcing Lab Experiments for New Ventures: The Potential of a Start-Up Database

ERIC Educational Resources Information Center

Pietrobon, Alberto

2009-01-01

This article responds to "Laboratory experiments as a tool in the empirical economic analysis of high-expectation start-ups" by Martin Curley and Piero Formica, published in the December 2008 issue of "Industry and Higher Education". Curley and Formica introduce a new concept for high-expectation start-ups, involving the use of "laboratory…

Successful IT Start-Ups' HRD Practices: Four Cases in South Korea

ERIC Educational Resources Information Center

Cho, Yonjoo; McLean, Gary N.

2009-01-01

Purpose: The purpose of this paper is to identify South Korea's successful IT start-ups' HRD practices to determine whether there are steps that must be taken to maintain their HRD expertise for continued growth. Design/methodology/approach: A case study approach employing four fast-growing IT start-up cases was undertaken based on semi-structured…

Engine management during NTRE start up

NASA Technical Reports Server (NTRS)

Bulman, Mel; Saltzman, Dave

1993-01-01

The topics are presented in viewgraph form and include the following: total engine system management critical to successful nuclear thermal rocket engine (NTRE) start up; NERVA type engine start windows; reactor power control; heterogeneous reactor cooling; propellant feed system dynamics; integrated NTRE start sequence; moderator cooling loop and efficient NTRE starting; analytical simulation and low risk engine development; accurate simulation through dynamic coupling of physical processes; and integrated NTRE and mission performance.

Cool-down and frozen start-up behavior of a grooved water heat pipe

NASA Technical Reports Server (NTRS)

Jang, Jong Hoon

1990-01-01

A grooved water heat pipe was tested to study its characteristics during the cool-down and start-up periods. The water heat pipe was cooled down from the ambient temperature to below the freezing temperature of water. During the cool-down, isothermal conditions were maintained at the evaporator and adiabatic sections until the working fluid was frozen. When water was frozen along the entire heat pipe, the heat pipe was rendered inactive. The start-up of the heat pipe from this state was studied under several different operating conditions. The results show the existence of large temperature gradients between the evaporator and the condenser, and the moving of the melting front of the working fluid along the heat pipe. Successful start-up was achieved for some test cases using partial gravity assist. The start-up behavior depended largely on the operating conditions.

The physics of tokamak start-up

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mueller, D.

Tokamak start-up on present-day devices usually relies on inductively induced voltage from a central solenoid. In some cases, inductive startup is assisted with auxiliary power from electron cyclotron radio frequency heating. International Thermonuclear Experimental Reactor, the National Spherical Torus Experiment Upgrade and JT60, now under construction, will make use of the understanding gained from present-day devices to ensure successful start-up. Design of a spherical tokamak (ST) with DT capability for nuclear component testing would require an alternative to a central solenoid because the small central column in an ST has insufficient space to provide shielding for the insulators in themore » solenoid. Alternative start-up techniques such as induction using outer poloidal field coils, electron Bernstein wave start-up, coaxial helicity injection, and point source helicity injection have been used with success, but require demonstration of scaling to higher plasma current.« less

Storytelling at Its Best: Using the StartUp Podcast in the Classroom

ERIC Educational Resources Information Center

Teckchandani, Atul; Obstfeld, David

2017-01-01

This article discusses the virtues of using podcasts in the classroom by focusing on the pedagogical merits of one podcast: StartUp. The StartUp podcast provides a compelling first-person account of the entrepreneurial journey, as told by an award-winning radio journalist. Episodes from the podcast can be used to engage students and improve their…

Start-up of an anaerobic fluidized bed reactor treating synthetic carbohydrate rich wastewater.

PubMed

Yeshanew, Martha M; Frunzo, Luigi; Luongo, Vincenzo; Pirozzi, Francesco; Lens, Piet N L; Esposito, Giovanni

2016-12-15

The present work studied the start-up process of a mesophilic (37 ± 2 °C) anaerobic fluidized bed reactor (AFBR) operated at a hydraulic retention time (HRT) of 20 days using synthetic carbohydrate rich wastewater. Anox Kaldness-K1 carriers were used as biofilm carrier material. The reactor performance and biofilm formation were evaluated during the process. The start-up process at lower liquid recirculation flow rate enhanced the biofilm formation and reactor performance. The organic substrate composition had a major impact on early colonization of methanogenic archaea onto the surface of the Kaldness carriers during the start-up process. Specific organic substrates favouring the growth of methanogenic archaea, such as acetate, are preferred in order to facilitate the subsequent biofilm formation and AFBR start-up. The supply of 'bio-available' nutrients and trace elements, in particular iron, had an important role on optimal methanogenic activity and speeding-up of the biofilm development on the Kaldness carriers. This paper provides possible strategies to optimize the various operational parameters that influence the initial biofilm formation and development in an AFBR and similar high rate anaerobic reactors, hence can be used to reduce the long time required for process start-up. Copyright © 2016 Elsevier Ltd. All rights reserved.

Dioxins from medical waste incineration: Normal operation and transient conditions.

PubMed

Chen, Tong; Zhan, Ming-xiu; Yan, Mi; Fu, Jian-ying; Lu, Sheng-yong; Li, Xiao-dong; Yan, Jian-hua; Buekens, Alfons

2015-07-01

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are key pollutants in waste incineration. At present, incinerator managers and official supervisors focus only on emissions evolving during steady-state operation. Yet, these emissions may considerably be raised during periods of poor combustion, plant shutdown, and especially when starting-up from cold. Until now there were no data on transient emissions from medical (or hospital) waste incineration (MWI). However, MWI is reputed to engender higher emissions than those from municipal solid waste incineration (MSWI). The emission levels in this study recorded for shutdown and start-up, however, were significantly higher: 483 ± 184 ng Nm(-3) (1.47 ± 0.17 ng I-TEQ Nm(-3)) for shutdown and 735 ng Nm(-3) (7.73 ng I-TEQ Nm(-3)) for start-up conditions, respectively. Thus, the average (I-TEQ) concentration during shutdown is 2.6 (3.8) times higher than the average concentration during normal operation, and the average (I-TEQ) concentration during start-up is 4.0 (almost 20) times higher. So monitoring should cover the entire incineration cycle, including start-up, operation and shutdown, rather than optimised operation only. This suggestion is important for medical waste incinerators, as these facilities frequently start up and shut down, because of their small size, or of lacking waste supply. Forthcoming operation should shift towards much longer operating cycles, i.e., a single weekly start-up and shutdown. © The Author(s) 2015.

Model for the techno-economic analysis of common work of wind power and CCGT power plant to offer constant level of power in the electricity market

NASA Astrophysics Data System (ADS)

Tomsic, Z.; Rajsl, I.; Filipovic, M.

2017-11-01

Wind power varies over time, mainly under the influence of meteorological fluctuations. The variations occur on all time scales. Understanding these variations and their predictability is of key importance for the integration and optimal utilization of wind in the power system. There are two major attributes of variable generation that notably impact the participation on power exchanges: Variability (the output of variable generation changes and resulting in fluctuations in the plant output on all time scales) and Uncertainty (the magnitude and timing of variable generation output is less predictable, wind power output has low levels of predictability). Because of these variability and uncertainty wind plants cannot participate to electricity market, especially to power exchanges. For this purpose, the paper presents techno-economic analysis of work of wind plants together with combined cycle gas turbine (CCGT) plant as support for offering continues power to electricity market. A model of wind farms and CCGT plant was developed in program PLEXOS based on real hourly input data and all characteristics of CCGT with especial analysis of techno-economic characteristics of different types of starts and stops of the plant. The Model analyzes the followings: costs of different start-stop characteristics (hot, warm, cold start-ups and shutdowns) and part load performance of CCGT. Besides the costs, the technical restrictions were considered such as start-up time depending on outage duration, minimum operation time, and minimum load or peaking capability. For calculation purposes, the following parameters are necessary to know in order to be able to economically evaluate changes in the start-up process: ramp up and down rate, time of start time reduction, fuel mass flow during start, electricity production during start, variable cost of start-up process, cost and charges for life time consumption for each start and start type, remuneration during start up time regarding expected or unexpected starts, the cost and revenues for balancing energy (important when participating in electricity market), and the cost or revenues for CO2-certificates. Main motivation for this analysis is to investigate possibilities to participate on power exchanges by offering continues guarantied power from wind plants by backing-up them with CCGT power plant.

System and method to allow a synchronous motor to successfully synchronize with loads that have high inertia and/or high torque

DOEpatents

Melfi, Michael J.

2015-10-20

A mechanical soft-start type coupling is used as an interface between a line start, synchronous motor and a heavy load to enable the synchronous motor to bring the heavy load up to or near synchronous speed. The soft-start coupling effectively isolates the synchronous motor from the load for enough time to enable the synchronous motor to come up to full speed. The soft-start coupling then brings the load up to or near synchronous speed.

>venture>: Support for Early Stage Start-ups and Potential Entrepreneurs.

PubMed

Kauz, Lukas

2014-12-01

>venture>, the leading Swiss-wide business plan competition, is an ideal partner for young start-ups and entrepreneurs. For the upcoming tenth anniversary edition the competition will receive an update. Building upon a successful base of the past nine editions and equipped with contemporary networking events and more know-how transferring seminars, >venture> will fit even better into the Swiss start-up ecosystem.

Going Boldly Into the Future: Skills and Australian High Technology Start-Up Firms.

ERIC Educational Resources Information Center

Whittingham, Karen

The skill needs of Australian high-technology start-up companies and the implications of those skill needs for vocational education and training (VET) were examined through a study of 14 start-ups' inherent abilities to access the VET system and on VET's relevance to their needs. The case studies documented a strong demand and role for VET in the…

Patterns in Student Perceptions of Start-Up and Conversion Small High Schools

ERIC Educational Resources Information Center

Feldman, Jay; O'Dwyer, Anne

2010-01-01

Schools created as part of the small schools movement have been in operation for almost a decade, allowing identification of patterns in their growth. This study examines 4 years of survey data on 12 start-up and 13 conversion small high schools. Start-up small schools, almost all of which began with one grade level and grew by one grade per year,…

Experience with the design and start up of two full-scale UASB plants in Brazil: enhancements and drawbacks.

PubMed

Chernicharo, C A L; Almeida, P G S; Lobato, L C S; Couto, T C; Borges, J M; Lacerda, Y S

2009-01-01

This paper discusses the main drawbacks and enhancements experienced with the design and start up of two full-scale UASB plants in Brazil. The topics addressed are related to blockage of inlet pipes, scum accumulation, seed sludge for the start-up, corrosion and gas leakage, odour generation and sludge management. The paper describes the main improvements achieved.

Experience from start-ups of the first ANITA Mox plants.

PubMed

Christensson, M; Ekström, S; Andersson Chan, A; Le Vaillant, E; Lemaire, R

2013-01-01

ANITA™ Mox is a new one-stage deammonification Moving-Bed Biofilm Reactor (MBBR) developed for partial nitrification to nitrite and autotrophic N-removal from N-rich effluents. This deammonification process offers many advantages such as dramatically reduced oxygen requirements, no chemical oxygen demand requirement, lower sludge production, no pre-treatment or requirement of chemicals and thereby being an energy and cost efficient nitrogen removal process. An innovative seeding strategy, the 'BioFarm concept', has been developed in order to decrease the start-up time of new ANITA Mox installations. New ANITA Mox installations are started with typically 3-15% of the added carriers being from the 'BioFarm', with already established anammox biofilm, the rest being new carriers. The first ANITA Mox plant, started up in 2010 at Sjölunda wastewater treatment plant (WWTP) in Malmö, Sweden, proved this seeding concept, reaching an ammonium removal rate of 1.2 kgN/m³ d and approximately 90% ammonia removal within 4 months from start-up. This first ANITA Mox plant is also the BioFarm used for forthcoming installations. Typical features of this first installation were low energy consumption, 1.5 kW/NH4-N-removed, low N₂O emissions, <1% of the reduced nitrogen and a very stable and robust process towards variations in loads and process conditions. The second ANITA Mox plant, started up at Sundets WWTP in Växjö, Sweden, reached full capacity with more than 90% ammonia removal within 2 months from start-up. By applying a nitrogen loading strategy to the reactor that matches the capacity of the seeding carriers, more than 80% nitrogen removal could be obtained throughout the start-up period.

Rodent Control: Seal Up! Trap Up! Clean Up!

MedlinePlus

... Skip directly to site content Start of Search Controls Search Form Controls Cancel Submit Search The CDC CDC A-Z ... V W X Y Z # Start of Search Controls Search Form Controls Cancel Submit Search The CDC ...

Having your cake and eating it too; effective engagement in start-ups from an academic seat

NASA Astrophysics Data System (ADS)

Mirkin, Chad

2012-02-01

In order for scientific advances to have a positive impact on society, they must be successfully transitioned from conceptually fundamental endeavors in academic research laboratories to valuable enabling technologies at start-up companies. Nanosphere, NanoInk, and AuraSense are three start-up companies that have been spun out of Northwestern based on research initiated in my laboratory. These companies are focused on commercializing nanotechnology-based applications in the life science and semiconductor industries and have turned discoveries from my lab into viable commercial products. For example, several of the systems developed at these start-ups are in the clinical trial phase, with one already approved by the FDA, and they are poised to have a positive world-wide impact. Herein, I discuss the challenges associated with identifying commercial value in academic research projects, securing intellectual property, forming a company as a legal entity, and locating sources of start-up funds. Further, I will discuss the rewards of venturing into such enterprises and the ways of ensuring a start-up company's long-term success, while juggling the numerous responsibilities of an academic seat. I argue that these two activities are done not in competition, but rather are integral for driving the type of high-level, synergistic scientific research that is being done today.

Start-up capabilities of photovoltaic module for the International Space Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hajela, G.; Hague, L.

1997-12-31

The International Space Station (ISS) uses four photovoltaic modules (PVMs) to supply electric power for the US On-Orbit Segment (USOS). The ISS is assembled on orbit over a period of about 5 years and over 40 stages. PVMs are launched and integrated with the ISS at different times during the ISS assembly. During early stages, the electric power is provided by the integrated truss segment (ITS) P6; subsequently, ITS P4, S4, and S6 are launched. PVMs are launched into space in the National Space Transportation System (NSTS) cargo bay. Each PVM consists of two independent power channels. The NSTS docksmore » with the ISS, the PVM is removed from the cargo bay and installed on the ISS. At this stage the PVM is in stowed configuration and its batteries are in fully discharged state. The start-up consists of initialization and checkout of all hardware, deployment of SAW and photovoltaic radiator (PVR), thermal conditioning batteries, and charging batteries; not necessarily in the same order for all PVMs. PVMs are designed to be capable of on-orbit start-up, within a specified time period, when external power is applied to a specified electrical interface. This paper describes the essential steps required for PVM start-up and how these operations are performed for various PVMs. The integrated operations scenarios (IOS) prepared by the NASA, Johnson Space Center, details specific procedures and timelines for start-up of each PVM. The paper describes how dormant batteries are brought to their normal operating temperature range and then charged to 100% state of charge (SOC). Total time required to complete start-up is computed and compared to the IOS timelines. External power required during start-up is computed and compared to the requirements and/or available power on ISS. Also described is how these start-up procedures can be adopted for restart of PVMs when required.« less

The Physics of Tokamak Start-up

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Mueller

Tokamak start-up on present-day devices usually relies on inductively induced voltage from a central solenoid. In some cases inductive startup is assisted with auxiliary power from electron cyclotron radio frequency heating. ITER, the National Spherical Torus eXperiment Upgrade and JT60, now under construction, will make use of the understanding gained from present-day devices to ensure successful start-up. Design of a spherical tokamak (ST) with DT capability for nuclear component testing would require an alternative to a central solenoid because the small central column in an ST has insufficient space to provide shielding for the insulators in the solenoid. Alternative start-upmore » techniques such as induction using outer poloidal field coils, electron Bernstein wave start-up, coaxial helicity injection and point source helicity injection have been used with success, but require demonstration of scaling to higher plasma current.« less

Under Voltage Lock-Out Design Rules for Proper Start-Up of Energy Autonomous Systems Powered by Supercapacitors

NASA Astrophysics Data System (ADS)

Boitier, V.; Durand Estèbe, P.; Monthéard, R.; Bafleur, M.; Dilhac, J. M.

2013-12-01

This paper deals with the issue of the initial start-up of an autonomous and battery-free system powered by an energy harvester associated with a storage subsystem based on supercapacitors initially discharged. A review of different low power Under Voltage Lock-Out (UVLO) solutions used to delay the load start-up and to avoid a useless discharge of supercapacitors is presented and discussed.

A Data Scientist's Guide to Start-Ups.

PubMed

Provost, Foster; Webb, Geoffrey I; Bekkerman, Ron; Etzioni, Oren; Fayyad, Usama; Perlich, Claudia

2014-09-01

In August 2013, we held a panel discussion at the KDD 2013 conference in Chicago on the subject of data science, data scientists, and start-ups. KDD is the premier conference on data science research and practice. The panel discussed the pros and cons for top-notch data scientists of the hot data science start-up scene. In this article, we first present background on our panelists. Our four panelists have unquestionable pedigrees in data science and substantial experience with start-ups from multiple perspectives (founders, employees, chief scientists, venture capitalists). For the casual reader, we next present a brief summary of the experts' opinions on eight of the issues the panel discussed. The rest of the article presents a lightly edited transcription of the entire panel discussion.

Preliminary investigation of flow dynamics during the start-up of a bulb turbine model

NASA Astrophysics Data System (ADS)

Coulaud, M.; Fraser, R.; Lemay, J.; Duquesne, P.; Aeschlimann, V.; Deschênes, C.

2016-11-01

Nowadays, the electricity network undergoes more perturbations due to the market demand. Additionally, an increase of the production from alternative resources such as wind or solar also induces important variations on the grid. Hydraulic power plants are used to respond quickly to these variations to stabilize the network. Hydraulic turbines have to face more frequent start-up and stop sequences that might shorten significantly their life time. In this context, an experimental analysis of start-up sequences has been conducted on the bulb turbine model of the BulbT project at the Hydraulic Machines Laboratory (LAMH) of Laval University. Maintaining a constant head, guide vanes are opened from 0 ° to 30 °. Three guide vanes opening speed have been chosen from 5 °/s to 20 °/s. Several repetitions were done for each guide vanes opening speed. During these sequences, synchronous time resolved measurements have been performed. Pressure signals were recorded at the runner inlet and outlet and along the draft tube. Also, 25 pressure measurements and strain measurements were obtained on the runner blades. Time resolved particle image velocimetry were used to evaluate flowrate during start-up for some repetitions. Torque fluctuations at shaft were also monitored. This paper presents the experimental set-up and start-up conditions chosen to simulate a prototype start-up. Transient flowrate methodology is explained and validation measurements are detailed. The preliminary results of global performances and runner pressure measurements are presented.

45 CFR 309.150 - What start-up costs are allowable for Tribal IV-D programs carried out under § 309.65(b) of this...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false What start-up costs are allowable for Tribal IV-D... ENFORCEMENT (IV-D) PROGRAM Tribal IV-D Program Funding § 309.150 What start-up costs are allowable for Tribal IV-D programs carried out under § 309.65(b) of this part? Federal funds are available for costs of...

A study of start-up characteristics of a potassium heat pipe from the frozen state

NASA Technical Reports Server (NTRS)

Jang, Jong Hoon

1992-01-01

The start up characteristics of a potassium heat pipe were studied both analytically and experimentally. Using the radiation heat transfer mode the heat pipe was tested in a vacuum chamber. The transition temperature calculated for potassium was then compared with the experimental results of the heat pipe with various heat inputs. These results show that the heat pipe was inactive until it reached the transition temperature. In addition, during the start up period, the evaporator experienced dry-out with a heat input smaller than the capillary limit calculated at the steady state. However, when the working fluid at the condensor was completely melted, the evaporation was rewetted without external aid. The start up period was significantly reduced with a large heat input.

Start-up and Self-sustain Test of 500 W Ultra-Micro Gas Turbine Generator

NASA Astrophysics Data System (ADS)

Seo, Jeong Min; Park, Jun Young; Seog Choi, Bum

2013-12-01

This paper provides the performance test for start-up and self-sustaining of 500W ultra-micro gas turbine (UMGT) generator. Each component of UMGT, a centrifugal compressor, a radial turbine, an annular combustor and a shaft is already designed, manufactured and tested to meet design requirements in previous researches. However, they are not tested to work in an integrate system. Currently, integrated test unit with a compressor, a combustor and a turbine, is developed to find the proper condition of start-up and self-sustain. Ignition sequence depending on rotating speed is designed. Performance test for start-up and self-sustain is designed based on the ignition possible condition. An air impingement starter and a hot bulb inginer are applied. LPG is used as main fuel.

78 FR 18360 - Prospective Grant of Start-Up Exclusive License: Manual Device for Constructing Tissue Micro...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Prospective Grant of Start..., is contemplating the grant of a start-up exclusive license to practice the inventions embodied in U.S... Cryoarray'' by Star et al. (NIDDK) to Micatu, Inc. having a place of business at 231 West Water Street...

Pushed or Pulled? Exploring the Factors Underpinning Graduate Start-Ups and Non-Start-Ups

ERIC Educational Resources Information Center

Nabi, G.; Walmsley, A.; Holden, R.

2015-01-01

The study explores the nature and mixture of push--pull factors in the journey from higher education into graduate entrepreneurship. Using longitudinal data from 15 graduates of a British university, it compares graduates who started their own business with graduates that did not. Importantly, both groups had initially indicated a strong desire to…

78 FR 46593 - Prospective Grant of Start-up Exclusive License: Kits for the Detection of Human Interferon-Alpha...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Prospective Grant of Start... Services, is contemplating the grant of a start-up exclusive license to practice the inventions embodied in... and Methods of Use'', to IES Diagnostics, LLC having a place of business at 12 Upper Drive, Watchung...

78 FR 31570 - Prospective Grant of a Start-Up Exclusive Patent License Agreement: Treatment of Graves' Disease...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-24

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Prospective Grant of a Start... of Health and Human Services, is contemplating the grant of a Start-Up Exclusive Patent License to Nova Therapeutics LLC, a company having a place of business in Delaware, to practice the inventions...

Successful hydraulic strategies to start up OLAND sequencing batch reactors at lab scale.

PubMed

Schaubroeck, Thomas; Bagchi, Samik; De Clippeleir, Haydée; Carballa, Marta; Verstraete, Willy; Vlaeminck, Siegfried E

2012-05-01

Oxygen-limited autotrophic nitrification/denitrification (OLAND) is a one-stage combination of partial nitritation and anammox, which can have a challenging process start-up. In this study, start-up strategies were tested for sequencing batch reactors (SBR), varying hydraulic parameters, i.e. volumetric exchange ratio (VER) and feeding regime, and salinity. Two sequential tests with two parallel SBR were performed, and stable removal rates > 0.4 g N l(-1) day(-1) with minimal nitrite and nitrate accumulation were considered a successful start-up. SBR A and B were operated at 50% VER with 3 g NaCl l(-1) in the influent, and the influent was fed over 8% and 82% of the cycle time respectively. SBR B started up in 24 days, but SBR A achieved no start-up in 39 days. SBR C and D were fed over 65% of the cycle time at 25% VER, and salt was added only to the influent of SBR D (5 g NaCl l(-1)). Start-up of both SBR C and D was successful in 9 and 32 days respectively. Reactor D developed a higher proportion of small aggregates (0.10-0.25 mm), with a high nitritation to anammox rate ratio, likely the cause of the observed nitrite accumulation. The latter was overcome by temporarily including an anoxic period at the end of the reaction phase. All systems achieved granulation and similar biomass-specific nitrogen removal rates (141-220 mg N g(-1) VSS day(-1)). FISH revealed a close juxtapositioning of aerobic and anoxic ammonium-oxidizing bacteria (AerAOB and AnAOB), also in small aggregates. DGGE showed that AerAOB communities had a lower evenness than Planctomycetes communities. A higher richness of the latter seemed to be correlated with better reactor performance. Overall, the fast start-up of SBR B, C and D suggests that stable hydraulic conditions are beneficial for OLAND while increased salinity at the tested levels is not needed for good reactor performance. © 2012 The Authors. Microbial Biotechnology © 2012 Society for Applied Microbiology and Blackwell Publishing Ltd.

Start-up performance of parabolic trough concentrating solar power plants

NASA Astrophysics Data System (ADS)

Ferruzza, Davide; Topel, Monika; Basaran, Ibrahim; Laumert, Björn; Haglind, Fredrik

2017-06-01

Concentrating solar power plants, even though they can be integrated with thermal energy storage, are still subjected to cyclic start-up and shut-downs. As a consequence, in order to maximize their profitability and performance, the flexibility with respect to transient operations is essential. In this regard, two of the key components identified are the steam generation system and steam turbine. In general it is desirable to have fast ramp-up rates during the start-up of a power plant. However ramp-up rates are limited by, among other things, thermal stresses, which if high enough can compromise the life of the components. Moreover, from an operability perspective it might not be optimal to have designs for the highest heating rates, as there may be other components limiting the power plant start-up. Therefore, it is important to look at the interaction between the steam turbine and steam generator to determine the optimal ramp rates. This paper presents a methodology to account for thermal stresses limitations during the power plant start up, aiming at identifying which components limit the ramp rates. A detailed dynamic model of a parabolic trough power plant was developed and integrated with a control strategy to account for the start-up limitations of both the turbine and steam generator. The models have been introduced in an existing techno-economic tool developed by the authors (DYESOPT). The results indicated that for each application, an optimal heating rates range can be identified. For the specific case presented in the paper, an optimal range of 7-10 K/min of evaporator heating rate can result in a 1.7-2.1% increase in electricity production compared to a slower component (4 K/min).

Life Sciences Start-ups in Switzerland: CTI and its Support for Young Entrepreneurs.

PubMed

Sekanina, Klara

2014-12-01

According to the Global Entrepreneurship Monitor 2013, perceived opportunities to start a business in Switzerland are high and rank above average compared to other innovation-based countries. 2013 was a record year for start-ups in Switzerland. Around 40,000 new businesses were recorded in the commercial register and the trend is set to continue. There are two main criteria that lead to success, particularly for science- or technology- based start-ups: first of all, it is the business or product idea itself, and secondly it is the entrepreneurial team. CTI is supporting innovation in a manner that responds to a need in the market identified by industry.

Lessons Learned: Transfer of the High-Definition Circulating Tumor Cell Assay Platform to Development as a Commercialized Clinical Assay Platform.

PubMed

Kuhn, P; Keating, S M; Baxter, G T; Thomas, K; Kolatkar, A; Sigman, C C

2017-11-01

Planning and transfer of a new technology platform developed in an academic setting to a start-up company for medical diagnostic product development may appear daunting and costly in terms of complexity, time, and resources. In this review we outline the key steps taken and lessons learned when a technology platform developed in an academic setting was transferred to a start-up company for medical diagnostic product development in the interest of elucidating development toolkits for academic groups and small start-up companies starting on the path to commercialization and regulatory approval. © 2017, The American Society for Clinical Pharmacology and Therapeutics.

Optimization of steam-vortex plasma-torch start-up

NASA Astrophysics Data System (ADS)

Mikhailov, B. I.

2011-12-01

We propose a new optimal method of steam-vortex plasma-torches start-up; this method completely prevents the danger of water steam condensation in the arc chamber and all undesirable consequences of it.

SuperJet International case study: a business network start-up in the aeronautics industry

NASA Astrophysics Data System (ADS)

Corallo, Angelo; de Maggio, Marco; Storelli, Davide

This chapter presents the SuperJet International case study, a start-up in the aeronautics industry characterized by a process-oriented approach and a complex and as yet evolving network of partnerships and collaborations. The chapter aims to describe the key points of the start-up process, highlighting common factors and differences compared to the TEKNE Methodology of Change, with particular reference to the second and third phase, namely, the design and deployment of new techno-organizational systems. The SuperJet International startup is presented as a case study where strategic and organizational aspects have been jointly conceived from a network-driven perspective. The chapter compares some of the guidelines of the TEKNE Methodology of Change with experiences and actual practices deriving from interviews with key players in SJI's start-up process.

UpStart Parent Survey-Prenatal: A New Tool for Evaluating Prenatal Education Programs.

PubMed

Benzies, Karen M; Barker, Leslie; Churchill, Jocelyn; Smith, Jennifer; Horn, Sarah

2016-09-01

To evaluate a new prenatal education program evaluation tool, the UpStart Parent Survey - Prenatal, in terms of: (a) reliability and validity; (b) sensitivity to change over time; (c) whether results differed for mothers versus fathers; and (d) whether results differed when using an electronic tablet-computer versus a paper survey. Psychometric study. Participants were 277 expectant mothers (n = 161) and fathers (n = 106) enrolled in Childbirth Essentials, a 6-week prenatal education program. The UpStart Parent Survey - Prenatal is a retrospective pretest/posttest survey with three scales: Parenting Knowledge, Parenting Experience, and Program Satisfaction, and three open-ended questions. The UpStart Parent Survey - Prenatal is sensitive to change and demonstrated significant positive differences in parenting knowledge and parenting experience. There was no difference in results whether the survey was completed by mothers or fathers. Results were similar whether paper or electronic formats were used. The survey was easy to complete. The UpStart Parent Survey - Prenatal holds promise as a reliable and valid evaluation tool to capture outcomes of brief prenatal education programs that target the general population of expectant parents. © 2016 Wiley Periodicals, Inc.

Rapid start-up of one-stage deammonification MBBR without addition of external inoculum.

PubMed

Kanders, Linda; Ling, Daniel; Nehrenheim, Emma

2016-12-01

In recent years, the anammox process has emerged as a useful method for robust and efficient nitrogen removal in wastewater treatment plants (WWTPs). This paper evaluates a one-stage deammonification (nitritation and anammox) start-up using carrier material without using anammox inoculum. A continuous laboratory-scale process was followed by full-scale operation with reject water from the digesters at Bekkelaget WWTP in Oslo, Norway. A third laboratory reactor was run in operational mode to verify the suitability of reject water from thermophilic digestion for the deammonification process. The two start-ups presented were run with indigenous bacterial populations, intermittent aeration and dilution, to favour growth of the anammox bacterial branches. Evaluation was done by chemical and fluorescence in situ hybridization analyses. The results demonstrate that anammox culture can be set up in a one-stage process only using indigenous anammox bacteria and that a full-scale start-up process can be completed in less than 120 days.

Study on Self-start up of Polymer Electrolyte Fuel Cell Stack at Subzero Temperature

NASA Astrophysics Data System (ADS)

Shirato, Hiroyasu; Hoshina, Hideo; Yamakoshi, Yukiyasu; Tomita, Kazuhiko; Oka, Yoshiaki

This paper aims to boot up polymer electrolyte fuel cells at subzero temperature without energy from outside and compass the conditions. Visualization tests of water drainage and voltage-current density characteristics provided the selection of a serpentine type as a channel of a fuel cell separator for cold region. The successful start-up of the cell at subzero temperature requires suitable current densities corresponding to the ambient temperature since the lower the temperature is, the lower the cell voltage soon after the start-up is. Suitable amount of exhausted energy is also necessary for the successful self start-up. Humidification using potassium acetate 30 mass% solution provides increased impedance of the cell and inhibits the water freezing owing to its dispersal to the electrode compared to no humidification. A stack laminated 25 sheets of the serpentine type separators enables stabilized power generation at normal temperature. The stack is also bootable with no energy from outside at 263K.

Start-Up of FEL Oscillator from Shot Noise

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kumar, V.; Krishnagopal, S.; Fawley, W.M.

In free-electron laser (FEL) oscillators, as inself-amplified spontaneous emission (SASE) FELs, the buildup of cavitypower starts from shot noise resulting from the discreteness ofelectronic charge. It is important to do the start-up analysis for thebuild-up of cavity power in order to fix the macropulse width from theelectron accelerator such that the system reaches saturation. In thispaper, we use the time-dependent simulation code GINGER [1]toperformthis analysis. We present results of this analysis for theparameters of the Compact Ultrafast TErahertz FEL (CUTE-FEL) [2]beingbuilt atRRCAT.

40 CFR 63.6645 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... standards. (b) As specified in § 63.9(b)(2), if you start up your stationary RICE with a site rating of more..., you must submit an Initial Notification not later than December 13, 2004. (c) If you start up your new... than 120 days after you become subject to this subpart. (d) As specified in § 63.9(b)(2), if you start...

Ophthalmic Start-Up Chief Executive Officers' Perceptions of Development Hurdles.

PubMed

Stewart, William C; Nelson, Lindsay A; Kruft, Bonnie; Stewart, Jeanette A

2018-01-01

To identify current challenges facing ophthalmic pharmaceutical start-ups in developing new products. Surveys were distributed to the chief executive officer (CEO) or president of ophthalmic start-ups. The survey attracted 24 responses from 78 surveys distributed (31%). The CEOs stated that a lack of financial capital (n = 18, 75%), FDA regulations (n = 6, 25%), and failure to meet clinical endpoints (n = 6, 25%) were their greatest development hurdles. Risk aversion to medicines in early development (n = 18, 75%), mergers and acquisitions reducing corporate choice for licensing agreements (n = 7, 29%), the emergence of large pharmaceutical-based venture capital funding groups (n = 12, 50%), and the failure of many large pharmaceutical companies to develop their own medicines (n = 10, 42%) were noted as recent prominent trends affecting fundraising. The study suggests that development funding, regulatory burden, and meeting clinical endpoints are the greatest development challenges faced by ophthalmic start-up CEOs. © 2017 S. Karger AG, Basel.

SP-100 system thaw and start-up strategies

NASA Astrophysics Data System (ADS)

Kirpich, A.; Choe, H.

The authors review several strategies that have been considered during calendar year 1990 for SP-100 system start-up and thaw, and provide results of screening analyses. Screening studies have identified three concepts which are capable of thawing the SP-100 system: (1) a heat pipe approach in which reactor-heated heat pipes are routed to equipment enclosed within a thaw cavity; (2) a bleed-tube approach in which perforated tubes routed through ducting and components achieve thaw progressively as the result of successively thawing bleed-holes; and (3) a NaK traceline approach in which reactor-heated NaK is routed along ducting and components and achieves lithium thaw by both radiative and conductive coupling methods. Key issues have been identified in connection with pump start-up, reactor and power converter transient behavior, and hydraulic circuit stability. Pump start-up stability is accomplished by a linked-pump hydraulic arrangement.

Von Start-ups lernen - Methoden und Entwicklungsprozesse, die Jungunternehmen erfolgreich machen

NASA Astrophysics Data System (ADS)

Böhme, Eckhart

Die Start-up-Bewegung bringt beständig sog. Disruptoren hervor, die jede Branche betreffen und so gut wie keinen Lebensbereich auslassen. Diese Jungunternehmen, insbesondere aus der Softwarebranche, verfügen zwar nicht über Ressourcen wie etablierte Unternehmen, sie sind jedoch agil, "hungrig", können frei von "Ballast" agieren und treiben die Digitalisierung aller Branchen voran. Aber auch Start-ups können nicht einfach ungetestete Ideen in erfolgreiche Produkte oder Dienstleistungen umwandeln und ihren Erfolg dem Zufall überlassen. Erfolgreiche Jungunternehmen folgen vielmehr einem strukturierten Prozess, um marktgetestete Nutzenversprechen und Geschäftsmodelle zu entwickeln. Zunehmend adaptieren etablierte Unternehmen innovative Entwicklungsprozesse und Methoden. Die Fragestellung für Energieversorgungsunternehmen (EVUs) lautet, welche Methoden, Werkzeuge und Entwicklungsprozesse, die heute bei vielen Start-ups eingesetzt werden, sie aufgreifen können, um das Unternehmen gegenüber Disruptoren robust zu machen?

Manual wheelchair propulsion patterns on natural surfaces during start-up propulsion.

PubMed

Koontz, Alicia M; Roche, Bailey M; Collinger, Jennifer L; Cooper, Rory A; Boninger, Michael L

2009-11-01

To classify propulsion patterns over surfaces encountered in the natural environment during start-up and compare selected biomechanical variables between pattern types. Case series. National Veterans Wheelchair Games, Minneapolis, MN, 2005. Manual wheelchair users (N=29). Subjects pushed their wheelchairs from a resting position over high-pile carpet, over linoleum, and up a ramp with a 5 degrees incline while propulsion kinematics and kinetics were recorded with a motion capture system and an instrumented wheel. Three raters classified the first 3 strokes as 1 of 4 types on each surface: arc, semicircular (SC), single looping over propulsion (SL), and double looping over propulsion (DL). The Fisher exact test was used to assess pattern changes between strokes and surface type. A multiple analysis of variance test was used to compare peak and average resultant force and moment about the hub, average wheel velocity, stroke frequency, contact angle, and distance traveled between stroke patterns. SL was the most common pattern used during start-up propulsion (44.9%), followed by arc (35.9%), DL (14.1%), and SC (5.1%). Subjects who dropped their hands below the rim during recovery achieved faster velocities and covered greater distances (.016< or =P< or =.075) during start-up on linoleum and carpet and applied more force during start-up on the ramp compared with those who used an arc pattern (P=.066). Classifying propulsion patterns is a difficult task that should use multiple raters. In addition, propulsion patterns change during start-up, with an arc pattern most prevalent initially. The biomechanical findings in this study agree with current clinical guidelines that recommend training users to drop the hand below the pushrim during recovery.

Flight evaluation of the DEEC secondary control air-start capability

NASA Technical Reports Server (NTRS)

Johnson, J. B.; Nelson, J.

1983-01-01

The air-start capability of a secondary engine control (SEC) was tested for a DEEC-equipped F100 engine and installed in an F-15 airplane. Two air-start schedules were tested. The first was referred to as the group I schedule; the second or revised schedule was the group II start schedule. Using the group I start schedule, an airspeed of 300 knots was required to ensure successful 40- and 25-percent SEC-mode air starts. If N2 were less than 40 percent, a stall would occur when the start bleeds closed 40 sec after initiation of the air start. All JFS-assisted air starts were successful with the group start schedule. For the group II schedule, the time between pressurization and start-bleed closure ranged between 50 and 72 sec depending on altitude. All air starts were successful above 225 knots givin a 75-knot reduction in required airspeed for a successful air start. Spooldown air starts of 40 percent were successful at 200 knots at altitudes up to 10,650 m and at 175 knots at altitudes up to 6100 m. Idle rpm was lower than the desired 65 percent for air starts at higher altitudes and lower airspeeds. All JSF-assisted air starts were successful.

Legal Challenges and Pitfalls for Start-up Companies - 48 Common Questions and Answers.

PubMed

Staehelin, Matthias

2014-12-01

Transforming a business idea into reality requires a legal implementation plan. The following 48 questions and answers address key issues that typically arise in start-up situations. Early planning can help avoid costly mistakes.

26 CFR 301.6222(a)-1 - Consistent treatment of partnership items.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... Partnership P incurred certain start-up costs before P was actively engaged in its business. P capitalized these costs. C, a partner in P, deducted C's proportionate share of these start-up costs. C's treatment...

Solenoid-free plasma start-up in spherical tokamaks

NASA Astrophysics Data System (ADS)

Raman, R.; Shevchenko, V. F.

2014-10-01

The central solenoid is an intrinsic part of all present-day tokamaks and most spherical tokamaks. The spherical torus (ST) confinement concept is projected to operate at high toroidal beta and at a high fraction of the non-inductive bootstrap current as required for an efficient reactor system. The use of a conventional solenoid in a ST-based fusion nuclear facility is generally believed to not be a possibility. Solenoid-free plasma start-up is therefore an area of extensive worldwide research activity. Solenoid-free plasma start-up is also relevant to steady-state tokamak operation, as the central transformer coil of a conventional aspect ratio tokamak reactor would be located in a high radiation environment but would be needed only during the initial discharge initiation and current ramp-up phases. Solenoid-free operation also provides greater flexibility in the selection of the aspect ratio and simplifies the reactor design. Plasma start-up methods based on induction from external poloidal field coils, helicity injection and radio frequency current drive have all made substantial progress towards meeting this important need for the ST. Some of these systems will now undergo the final stages of test in a new generation of large STs, which are scheduled to begin operations during the next two years. This paper reviews research to date on methods for inducing the initial start-up current in STs without reliance on the conventional central solenoid.

Partnering with the NIH: Now part of the “Value Proposition” for start-ups

PubMed Central

Ferguson, Steven M.

2012-01-01

With its “value proposition” statement a start-up company needs to convince potential investors or pharma partners how it will add more value or solve a problem better than others. High value, low cost assets such as those from the NIH ranging from technology to funding to assistance provide such biomedical firms an excellent jump-start in reaching their goals. PMID:23476116

Start-up of thermophilic-dry anaerobic digestion of OFMSW using adapted modified SEBAC inoculum.

PubMed

Fdéz-Güelfo, L A; Alvarez-Gallego, C; Sales Márquez, D; Romero García, L I

2010-12-01

The work presented here concerns the start-up and stabilization stages of a Continuous Stirred Tank Reactor (CSTR) semicontinuously fed for the treatment of the Organic Fraction of Municipal Solid Waste (OFMSW) through anaerobic digestion at thermophilic temperature range (55 degrees C) and dry conditions (30% Total Solids). The procedure reported involves two novel aspects with respect to other start-up and stabilization protocols reported in the literature. The novel aspects concern the adaptation of the inoculum to both the operating conditions (thermophilic and dry) and to the type of waste by employing a modified SEBAC (Sequential Batch Anaerobic Composting) system and, secondly, the direct start-up of the process in a thermophilic temperature regime and feeding of the system from the first day of operation. In this way a significant reduction in the start-up time and stabilization is achieved i.e. 110 days in comparison to 250 days for the processes reported by other authors for the same type of waste and digester. The system presents suitable operational conditions to stabilize the reactor at SRT of 35 days, with a maximum biogas production of 1.944 LR/L.d with a CH(4) and CO(2) percentage of 25.27% and 68.15%, respectively. 2010 Elsevier Ltd. All rights reserved.

Using Thermoelectric Coolers to Enhance Loop Heat Pipe Performance

NASA Technical Reports Server (NTRS)

Ku, Jentung; Butler, Dan; Ottenstein, Laura; Birur, Gajanana

2005-01-01

Contents include the following: Loop Heat Pipe (LHP) operating temperature. LHP start-up issues. How Thermoelectric Cooler (TECs) can enhance LHP performance: start-up; operating temperature control. Experimental studies: LHP with one evaporator and one condenser; LHP with two evaporators and two condensers. Conclusion.

Start-Up Scenario in Gyrotrons with a Nonstationary Microwave-Field Structure

NASA Astrophysics Data System (ADS)

Nusinovich, G. S.; Yeddulla, M.; Antonsen, T. M., Jr.; Vlasov, A. N.

2006-03-01

Megawatt class gyrotrons operate in very high-order modes. Therefore, control of a gyrotron oscillator’s start-up is important for excitation of the desired mode in the presence of the many undesired modes. Analysis of such scenario using the self-consistent code MAGY [M. Botton , IEEE Trans. Plasma Sci. 26,ITPSBD0093-3813 882 (1998)10.1109/27.700860] reveals that during start-up not only mode amplitudes vary in time, but also their axial structure can be time dependent. Simulations done for a 1.5 MW gyrotron show that the excitation of a single operating TE22,6 mode can exhibit a sort of intermittency when, first, it is excited as a mode whose axial structure extends outside the interaction cavity, then it ceases and then reappears as a mode mostly localized in the cavity. This phenomenon makes it necessary to analyze start-up scenarios in such gyrotrons with the use of codes that account for the possible evolution of field profiles.

Application of intelligent soft start in asynchronous motor

NASA Astrophysics Data System (ADS)

Du, Xue; Ye, Ying; Wang, Yuelong; Peng, Lei; Zhang, Suying

2018-05-01

The starting way of three phase asynchronous motor has full voltage start and step-down start. Direct starting brings large current impact, causing excessive local temperature to the power grid and larger starting torque will also impact the motor equipment and affect the service life of the motor. Aim at the problem of large current and torque caused by start-up, an intelligent soft starter is proposed. Through the application of intelligent soft start on asynchronous motor, highlights its application advantage in motor control.

Hybrid: Starting

Science.gov Websites

: gray bar STARTING When the vehicle is started, the gasoline engine "warms up." If necessary assists the gasoline engine when additional power is needed. It also acts as a generator, converting also starts the gasoline engine instantly when needed. Main stage: See through car with battery, engine

Testing of a Loop Heat Pipe Subjected to Variable Accelerating Forces

NASA Technical Reports Server (NTRS)

Ku, Jentung; Ottenstein, Laura; Kaya, Tarik; Rogers, Paul; Hoff, Craig

2000-01-01

This paper presents viewgraphs of the functionality of a loop heat pipe that was subjected to variable accelerating forces. The topics include: 1) Summary of LHP (Loop Heat Pipe) Design Parameters; 2) Picture of the LHP; 3) Schematic of Test Setup; 4) Test Configurations; 5) Test Profiles; 6) Overview of Test Results; 7) Start-up; 8) Typical Start-up without Temperature Overshoot; 9) Start-up with a Large Temperature Overshoot; 10) LHP Operation Under Stationary Condition; 11) LHP Operation Under Continuous Acceleration; 12) LHP Operation Under Periodic Acceleration; 13) Effects of Acceleration on Temperature Oscillation and Hysteresis; 14) Temperature Oscillation/Hysteresis vs Spin Rate; and 15) Summary.

Frequent Questions about Starting-up New Composite Wood Mills and the Use of Experimental Products and Resins

EPA Pesticide Factsheets

The following frequently asked questions (FAQs) address issues relating to starting-up new doestice composite wood mills and the use of experimental product and resin systems under the Formaldehyde Emission Standards for Composite Wood Products final rule

Frequently Asked Questions on Starting-up New Composite Wood Mills and the Use of Experimental Products and Resins

EPA Pesticide Factsheets

The following frequently asked questions (FAQs) address issues relating to starting-up new doestice composite wood mills and the use of experimental product and resin systems under the Formaldehyde Emission Standards for Composite Wood Products final rule

SOURCELESS STARTUP. A MACHINE CODE FOR COMPUTING LOW-SOURCE REACTOR STARTUPS

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacMillan, D.B.

1960-06-01

>A revision to the sourceless start-up code is presented. The code solves a system of differential equations encountered in computing the probability distribution of activity at an observed power level during reactor start-up from a very low source level. (J.R.D.)

Head Start on Science Preliminary Findings.

ERIC Educational Resources Information Center

Ritz, William C.; Von Blum, Ruth

For many Head Start teachers and staff, the word "science" conjures up uncomfortable feelings and memories. The purpose of this project--a collaborative effort of California State University, Long Beach and the Head Start Program of Long Beach Unified School District (LBUSD)--was to prepare Head Start staff to become more capable,…

Start-Up and Ongoing Practice Expenses of Behavioral Health and Primary Care Integration Interventions in the Advancing Care Together (ACT) Program.

PubMed

Wallace, Neal T; Cohen, Deborah J; Gunn, Rose; Beck, Arne; Melek, Steve; Bechtold, Donald; Green, Larry A

2015-01-01

Provide credible estimates of the start-up and ongoing effort and incremental practice expenses for the Advancing Care Together (ACT) behavioral health and primary care integration interventions. Expenditure data were collected from 10 practice intervention sites using an instrument with a standardized general format that could accommodate the unique elements of each intervention. Average start-up effort expenses were $44,076 and monthly ongoing effort expenses per patient were $40.39. Incremental expenses averaged $20,788 for start-up and $4.58 per patient for monthly ongoing activities. Variations in expenditures across practices reflect the differences in intervention specifics and organizational settings. Differences in effort to incremental expenditures reflect the extensive use of existing resources in implementing the interventions. ACT program incremental expenses suggest that widespread adoption would likely have a relatively modest effect on overall health systems expenditures. Practice effort expenses are not trivial and may pose barriers to adoption. Payers and purchasers interested in attaining widespread adoption of integrated care must consider external support to practices that accounts for both incremental and effort expense levels. Existing knowledge transfer mechanisms should be employed to minimize developmental start-up expenses and payment reform focused toward value-based, Triple Aim-oriented reimbursement and purchasing mechanisms are likely needed. © Copyright 2015 by the American Board of Family Medicine.

Start-up and operation strategies on the liquefied food waste anaerobic digestion and a full-scale case application.

PubMed

Meng, Ying; Shen, Fei; Yuan, Hairong; Zou, Dexun; Liu, Yanping; Zhu, Baoning; Chufo, Akiber; Jaffar, Muhammad; Li, Xiujin

2014-11-01

Batch anaerobic digestion was employed to investigate the efficient start-up strategies for the liquefied food waste, and sequencing batch digestion was also performed to determine maximum influent organic loading rate (OLR) for efficient and stable operation. The results indicated that the start-up could be well improved using appropriate wastewater organic load and food-to-microorganism ratios (F/M). When digestion was initialized at low chemical oxygen demand (COD) concentration of 20.0 gCOD L(-1), the start-up would go well using lower F/M ratio of 0.5-0.7. The OLR 7.0 gCOD L(-1) day(-1) was recommended for operating the ASBR digestion, in which the COD conversion of 96.7 ± 0.53% and biomethane yield of 3.5 ± 0.2 L gCOD(-1) were achieved, respectively. The instability would occur when OLR was higher than 7.0 gCOD L(-1) day(-1), and this instability was not recoverable. Lipid was suggested to be removed before anaerobic digestion. The anaerobic digestion process in engineering project ran well, and good performance was achieved when the start-up and operational strategies from laboratory study were applied. For case application, stable digestion performance was achieved in a digester (850 m(3) volume) with biogas production of 1.0-3.8 m(3) m(-3) day(-1).

Efficient ECH-assisted plasma start-up using trapped particle configuration in the versatile experiment spherical torus

NASA Astrophysics Data System (ADS)

An, YoungHwa; Lee, Jeongwon; Jo, JongGab; Jung, Bong-Ki; Lee, HyunYeong; Chung, Kyoung-Jae; Na, Yong-Su; Hahm, T. S.; Hwang, Y. S.

2017-01-01

An efficient and robust ECH (electron cyclotron heating)-assisted plasma start-up scheme with a low loop voltage and low volt-second consumption utilizing the trapped particle configuration (TPC) has been developed in the versatile experiment spherical torus (VEST). The TPC is a mirror-like magnetic field configuration providing a vertical magnetic field in the same direction as the equilibrium field. It significantly enhances ECH pre-ionization with enhanced particle confinement due to its mirror effect, and intrinsically provides an equilibrium field with a stable decay index enabling prompt plasma current initiation. Consequently, the formation of TPC before the onset of the loop voltage allows the plasma to start up with a lower loop voltage and lower volt-second consumption as well as a wider operation range in terms of ECH pre-ionization power and H2 filling pressure. The TPC can improve the widely-used field null configuration significantly for more efficient start-up when ECH pre-ionization is used. This can then be utilized in superconducting tokamaks requiring a low loop voltage start-up, such as ITER, or in spherical tori with limited volt-seconds. The TPC can be particularly useful in superconducting tokamaks with a limited current slew-rate of superconducting PF coils, as it can save volt-second consumption before plasma current initiation by providing prompt initiation with an intrinsic stable equilibrium field.

Quick-start of full-scale anaerobic digestion (AD) using aeration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lagerkvist, Anders, E-mail: al@ltu.se; Pelkonen, Markku; Wikström, Tommy

Highlights: • A fast, and original, start up procedure for anaerobic digestors has been applied at full scale. • The development of a methanogenic culture has been documented using fluorescent in situ hybridization. • The technique can be widely applied. - Abstract: A conventional 1300 m{sup 3} continuously stirred anaerobic tank reactor at the city of Boden, north Sweden, which was receiving a feed of both sewage sludge and food waste, was put out of operation due to the build-up of a float phase. The reactor was emptied and cleaned. At start-up there was no methanogenic sludge available, so anmore » unconventional start-up procedure was applied: The reactor was rapidly (8 days with 1200 kg of total solids (TS) added daily) filled with thickened, and slightly acidic sewage sludge, showing only slight methane generation, which was subsequently heated to 55 °C. Then compressed air was blown into the digester and within a month a fully functional methanogenic culture was established. The transfer from acidogenic to methanogenic conditions happened in about one week. As a start-up technique this is fast and cost efficient, it only requires the access of a compressor, electricity and a source of air. In total, about 16 tonnes of oxygen were used. It is proposed that this method may also be used as an operational amendment technique, should a reactor tend to acidify.« less

Engine starting and stopping

NASA Astrophysics Data System (ADS)

Curnock, Barry

Different starter systems for jet engines are discussed: electric, cartridge, iso-propyl-nitrate, air, gas turbine, and hydraulic. The fuel system, ignition system, air flow control system, and actual starting mechanism of an air starter motor system are considered. The variation of engine parameters throughout a typical starting sequence are described, with reference to examples for an RB211-535 engine. Physical constraints on engine starting are considered: rotating stall, light up, the window between hang and stall, hang, compressor stall, and the effects of ambient conditions. The following are also discussed: contractual and airworthiness requirements; windmilling; inflight relighting; afterburning light up; combustion stability; and broken shafts. Graphics illustrating the above are presented.

78 FR 34664 - Prospective Grant of Start-up Exclusive Evaluation License: Portable Device and Method for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-10

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Prospective Grant of Start-up Exclusive Evaluation License: Portable Device and Method for Detecting Hematomas AGENCY: National... device and method for detecting hematomas based on near infrared light emitted perpendicularly into a...

Frequently Asked Questions on Starting-up New Domestic Composite Wood Mills and the Use of Experimental Products and Resins

EPA Pesticide Factsheets

The following frequently asked questions (FAQs) address issues relating to starting-up new doestice composite wood mills and the use of experimental product and resin systems under the Formaldehyde Emission Standards for Composite Wood Products final rule

Starting Up after 50. CELCEE Digest.

ERIC Educational Resources Information Center

Seymour, Nicole

Researchers are finding that older entrepreneurs are an increasing population in many Western countries. It is important to distinguish between entrepreneurs who have simply reached the age of 50 versus those who start up businesses after this age. The latter group is of particular interest because these people have presumably never faced the…

The Venture Capital-University Interface: Best Practices for Maximum Impact

ERIC Educational Resources Information Center

Holly, Krisztina

2010-01-01

Entrepreneurial start-ups have left an indelible impression on much of the USA's recent economic history. As hotbeds for technological innovation, university research laboratories create groundbreaking innovations that have been at the heart of many successful start-ups. However, powerful ideas do not necessarily beget successful companies: great…

A Boom Time for Education Start-Ups

ERIC Educational Resources Information Center

DeSantis, Nick

2012-01-01

Harsh economic realities mean trouble for college leaders. But where administrators perceive an impending crisis, investors increasingly see opportunity. In recent years, venture capitalists have poured millions into education-technology start-ups, trying to cash in on a market they see as ripe for a digital makeover. And lately, those wagers have…

40 CFR 63.102 - General standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... in § 63.101 of this subpart), malfunction, or non-operation of the chemical manufacturing process... subpart G of this part apply. However, if a start-up, shutdown, malfunction or period of non-operation of... part during the start-up, shutdown, malfunction or period of non-operation. For example, if there is an...

76 FR 42712 - Advisory Committee on Head Start Research and Evaluation

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-19

... Research and Evaluation will provide feedback on the published final report for the Head Start Impact Study... recommendations on follow-up research, including additional analysis of the Head Start Impact Study data. The... research agenda, including--but not limited to--how the Head Start Impact Study fits within this agenda...

Characteristics of adapted hydrogenotrophic community during biomethanation.

PubMed

Rachbauer, Lydia; Beyer, Reinhard; Bochmann, Günther; Fuchs, Werner

2017-10-01

The results presented in this study were carried out as concomitant experiments during the start-up and operation of a biomethanation unit to evaluate the effect of process parameters on carbon conversion, product formation (methane and acetate) and community composition. For that, two different samples were withdrawn from a trickle-bed reactor with immobilized enrichment culture of hydrogenotrophic methanogens adapted from sewage sludge. One sample was taken from the recirculation liquid during start-up phase while the other was withdrawn directly from the carrier material in the reactor. Elevated acid levels especially during start-up were shown to affect the overall carbon conversion. This effect was also seen during the acid tolerance testing reported here. Final acid concentrations of 1.6±0.3g/L resulted in a reduced conversion ratio of only 46%. Without acid addition complete conversion of CO 2 in the headspace was achieved. However, maximum methane production of 0.55±0.02mmol after 4days of incubation was monitored at moderate initial acetate concentration of 0.4g/L. In both analyzed inoculation materials Methanobacterium species were by far the most dominant Archaea with 21.8% in the recirculation liquid during start-up and 84.8% in the enrichment culture immobilized on the carrier material. The microbial composition of the two analyzed samples is in accordance with the results obtained for the carbon conversion and product formation. With approximately 50% of Bacteroidetes and Firmicutes present during reactor start-up the acetic acid production significantly contributed to the overall carbon conversion. In contrast, methane was produced almost exclusively in trials representing continuous operation where acetogenic bacteria accounted only up to 17.5%. In summary, the acid accumulation monitored during reactor start-up of a biomethanation unit is most likely to result from the microbial composition present. Nevertheless, complete adaptation to hydrogenotrophic conditions was proven to alter the consortium and yield methane as main product alongside high carbon conversion of up to 70.5±1.8%. Copyright © 2017 Elsevier B.V. All rights reserved.

An efficient start-up circuitry for de-energized ultra-low power energy harvesting systems

NASA Astrophysics Data System (ADS)

Hörmann, Leander B.; Berger, Achim; Salzburger, Lukas; Priller, Peter; Springer, Andreas

2015-05-01

Cyber-physical systems often include small wireless devices to measure physical quantities or control a technical process. These devices need a self-sufficient power supply because no wired infrastructure is available. Their operational time can be enhanced by energy harvesting systems. However, the convertible power is often limited and discontinuous which requires the need of an energy storage unit. If this unit (and thus the whole system) is de-energized, the start-up process may take a significant amount of time because of an inefficient energy harvesting process. Therefore, this paper presents a system which enables a safe and fast start-up from the de-energized state.

Model citizens. Outsourcing helps start-up Medicare HMO.

PubMed

Slavic, B; Adami, S

1999-04-01

Health Plans of Pennsylvania (HPP), the managed care arm of Crozer-Keystone Health System, in Media, Pa. Selecting the information systems and building the infrastructure to support the start-up of a new Medicare HMO product. HPP chose to outsource the information systems needed to integrate all the components of managed care administration into a cost-effective and cohesive program. Because of its aggressive programming and start-up of the MedCarePlus product offering, HPP became the first plan in the country to submit Medicare claims data electronically for encounter reporting to the Health Care Financing Administration (HCFA). "Through an integrated team approach, an organization truly can benefit from the economies of scale gained through outsourcing."

Starting up the upstarts.

PubMed

Greene, J

1997-12-20

Venture capitalists pour $1 billion a year into health care--and that investment may be the most overlooked indicator of new business opportunities. Signs show that companies focused on consolidation and cost-cutting are off the A list for risk capital. Instead, venture capitalists are targeting start-ups that save money on the front lines by truly managing care.

78 FR 42532 - Prospective Grant of Start-Up Exclusive Evaluation Option License: Methods of Treating Giardiasis...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Prospective Grant of Start-Up Exclusive Evaluation Option License: Methods of Treating Giardiasis Using Available Compounds.../2013 filed April 22, 2013 (E-211- 2010/2-IN-05); each entitled ``Methods of Treating Giardiasis'' by...

Human Resource Blueprints in Irish High-Tech Start-Up Firms

ERIC Educational Resources Information Center

Keating, Mary A.; Olivares, Mariabrisa

2006-01-01

Focusing on Irish high-tech start-ups, this paper reports on the results of an empirical study of organization building by entrepreneurial firms, specifically in relation to human resource practices. The research findings are benchmarked with findings from SPEC, the Stanford Project of Emerging Companies (Baron and Hannan, 2002). Human resources…

42 CFR 137.302 - Are Federal funds available to cover start-up costs associated with initial Tribal assumption of...

Code of Federal Regulations, 2010 CFR

2010-10-01

... associated with initial Tribal assumption of environmental responsibilities? 137.302 Section 137.302 Public... OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Nepa Process § 137.302 Are Federal funds available to cover start-up costs associated with initial Tribal assumption of environmental...

42 CFR 137.302 - Are Federal funds available to cover start-up costs associated with initial Tribal assumption of...

Code of Federal Regulations, 2011 CFR

2011-10-01

... associated with initial Tribal assumption of environmental responsibilities? 137.302 Section 137.302 Public... OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Nepa Process § 137.302 Are Federal funds available to cover start-up costs associated with initial Tribal assumption of environmental...

International Meeting on Business Start-up (Lille, France, November 26-28, 1992).

ERIC Educational Resources Information Center

Melis, Africa, Ed.; Peigne, Florence, Ed.

1992-01-01

An international meeting explored work on business start-up undertaken jointly by CEDEFOP (European Centre for the Development of Vocational Training) and France's Agence Nationale pour la creation d'entreprise. One opening presentation (Melis) addressed the basic idea underlying the research: to identify and highlight the role of training and…

Developing Enterprise within Higher Education: Business Start-Up@Leeds. Met.

ERIC Educational Resources Information Center

Education + Training, 2003

2003-01-01

This issue on developing enterprise within higher education includes six articles on universities' partnerships, barriers to start-up and their effect on aspiring entrepreneurs, issues in marketing enterprise initiatives within a university, entrepreneurial summer school as a model for teaching, video as a teaching aid, and the role of personality…

Beta: An Experiment in Funded Undergraduate Start-Up

ERIC Educational Resources Information Center

Jones, Paul; Forbes-Simpson, Kellie; Maas, Gideon; Newbery, Robert

2015-01-01

This paper reports on an evaluation of a funded undergraduate project designed to enable student business start-up. The programme, entitled "Beta", provides undergraduate students with £1,500 of seed-corn funding. The key objective of the project is for the participants to exit it with a viable and legal business entity through which…

Graduating into Start-up: Exploring the Transition

ERIC Educational Resources Information Center

Nabi, Ghulam; Holden, Rick; Walmsley, Andreas

2009-01-01

The main purpose of the exploratory research discussed in this paper was to generate insights into the complexity of the career-making processes involved in the transition from being a student to starting up a business. Using story-telling interviews, data were collected from fifteen graduates based in the Yorkshire region of the UK. Qualitative…

PNNL Delivers Expertise, Technology to Biofuels Start-up, InEnTec

ScienceCinema

Surma, Jeff

2017-12-09

Initially through its Entrepreneurial Leave of Absence Program, PNNL gives biofuels innovators a start in opening up a new business based on technology developed for incinerating waste on the Hanford Site. Today, the companies Plasma Enhanced Melters are in operation around the world converting organic waste into valuable, clean fuels.

Achieving and Sustaining New Knowledge Development in High-Expectation Start-Ups

ERIC Educational Resources Information Center

Matricano, Diego

2010-01-01

In markets characterized by strong competition, new knowledge and new knowledge development are generally recognized as the key means for an enterprise to gain competitive advantage. This knowledge-based competitive advantage is critical for all commercial ventures, but is especially so for high-expectation start-ups (technology-based ventures…

Experimental Labs for Start-Ups: The Role of the "Venture-Sitter"

ERIC Educational Resources Information Center

Matricano, Diego; Pietrobon, Alberto

2010-01-01

Curley and Formica's (2008, 2010) studies of high-expectation entrepreneurship focus on the role of "experimental laboratories" in promoting the start-up and successful development of high-expectation firms. Although it is not difficult to understand the potential usefulness of these experimental labs--business simulators in which skilled partners…

49 CFR 173.137 - Class 8-Assignment of packing group.

Code of Federal Regulations, 2010 CFR

2010-10-01

... subchapter) as follows: (a) Packing Group I. Materials that cause full thickness destruction of intact skin... full thickness destruction of intact skin tissue within an observation period of up to 14 days starting... destruction of intact skin tissue within an observation period of up to 14 days starting after the exposure...

Creating Start-up Companies around NCI Inventions | Poster

Cancer.gov

By Karen Surabian, Thomas Stackhouse, and Rose Freel, Contributing Writers, and Rosemarie Truman, Guest Writer The National Cancer Institute (NCI), led by the Technology Transfer Center (TTC),  the Avon Foundation, and The Center for Advancing Innovation have partnered to create a “first-of-a-kind” Breast Cancer Start-up Challenge.

Start-up and operating costs for artisan cheese companies.

PubMed

Bouma, Andrea; Durham, Catherine A; Meunier-Goddik, Lisbeth

2014-01-01

Lack of valid economic data for artisan cheese making is a serious impediment to developing a realistic business plan and obtaining financing. The objective of this study was to determine approximate start-up and operating costs for an artisan cheese company. In addition, values are provided for the required size of processing and aging facilities associated with specific production volumes. Following in-depth interviews with existing artisan cheese makers, an economic model was developed to predict costs based on input variables such as production volume, production frequency, cheese types, milk types and cost, labor expenses, and financing. Estimated values for start-up cost for processing and aging facility ranged from $267,248 to $623,874 for annual production volumes of 3,402 kg (7,500 lb) and 27,216 kg (60,000 lb), respectively. First-year production costs ranged from $65,245 to $620,094 for the above-mentioned production volumes. It is likely that high start-up and operating costs remain a significant entry barrier for artisan cheese entrepreneurs. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Fully non-inductive plasma start-up with lower-hybrid waves using the outboard-launch and top-launch antennas on the TST-2 spherical tokamak

NASA Astrophysics Data System (ADS)

Tsujii, Naoto; Takase, Yuichi; Ejiri, Akira; Shinya, Takahiro; Yajima, Satoru; Yamazaki, Hibiki; Togashi, Hiro; Moeller, Charles P.; Roidl, Benedikt; Takahashi, Wataru; Toida, Kazuya; Yoshida, Yusuke

2017-10-01

Removal of the central solenoid is essential to realize an economical spherical tokamak fusion reactor, but non-inductive plasma start-up is a challenge. On the TST-2 spherical tokamak, non-inductive plasma start-up using lower-hybrid (LH) waves has been investigated. Using the capacitively-coupled combline (CCC) antenna installed at the outboard midplane, fully non-inductive plasma current ramp-up up to a quarter of that of the typical Ohmic discharges has been achieved. Although it was desirable to keep the density low during the plasma current ramp-up to avoid the LH density limit, it was recognized that there was a maximum current density that could be carried by a given electron density. Since the density needed to increase as the plasma current was ramped-up, the achievable plasma current was limited by the maximum operational toroidal field of TST-2. The top-launch CCC antenna was installed to access higher density with up-shift of the parallel index of refraction. Numerical analysis of LH current drive with the outboard-launch and top-launch antennas was performed and the results were qualitatively consistent with the experimental observations.

Advanced Teleprocessing Systems.

DTIC Science & Technology

1984-09-30

up delay depends on the amount of work (or the number of customers) ar- riving to the system at the beginning of the start-up period. 2) A system...types of systems are analyzed: 1) A system where the start-up delay depends on the amount of work (or the number of customers) ar- riving to the system...net- work where terminals are randomly distributed on the plane, are able to capture transmitted signals, and use slotted ALOHA to access the chan- nel

Scholars Cite Privacy Law as Obstacle: Protections for Students Impeding Researchers

ERIC Educational Resources Information Center

Viadero, Debra

2006-01-01

Researchers looking to tap into the treasure troves of long-term student-achievement data that states and districts are starting to pile up say their efforts are increasingly running up against a decades-old federal law designed to protect student privacy. "More and more people are starting to look into questions of the federal…

Try Caring...For a Living. Wisconsin Child Care Improvement Project Child Care Administration Series.

ERIC Educational Resources Information Center

Wisconsin Early Childhood Association, Madison.

A collection of 26 fact sheets on child care administration produced by the Wisconsin Child Care Improvement Project from 1986 through 1989 is presented. Individual fact sheets concern: national trends, center start-up, family day care start-up, site and facility acquisition, public funding, effective center operation, reporting of child abuse and…

Third National Even Start Evaluation: Follow-Up Findings from the Experimental Design Study. NCEE 2005-3002

ERIC Educational Resources Information Center

Ricciuti, Anne E., St.Pierre, Robert G.; Lee, Wang; Parsad, Amanda

2004-01-01

Citation: Ricciuti, A.E., R.G. St.Pierre, W. Lee, A. Parsad & T. Rimdzius. Third National Even Start Evaluation: Follow-Up Findings From the Experimental Design Study. U.S. Department of Education, Institute of Education Sciences, National Center for Education Evaluation and Regional Assistance. Washington, D.C., 2004. Background: The Even…

Implications of the Dynamics of the New Networked Economy for E-Business Start-Ups: The Case of Philips' Access Point.

ERIC Educational Resources Information Center

Tovstiga, George; Fantner, Ernest J.

2000-01-01

Examines implications of the networked economy for e-commerce business start-ups. Revisits the notion of "value" and "value creation" in a network context. Examines "value" relative to technological innovation. Looks at implications of the network environment for the organization and transformation of the enterprise's…

Graduate Career-Making and Business Start-Up: A Literature Review

ERIC Educational Resources Information Center

Nabi, Ghulam; Holden, Rick; Walmsley, Andreas

2006-01-01

Purpose: The purpose of this article is to provide a selective review of literature on the career-related decision-making processes in terms of the transition from student to business start-up, and the nature and influence of support and guidance. Design/methodology/approach: Primarily, a critical review of a range of recently published literature…

Self-Employment for People with Disabilities in the United States: A Recommended Process for Vocational Rehabilitation Agencies.

ERIC Educational Resources Information Center

Arnold, Nancy; Seekins, Tom; Ipsen, Catherine; Colling, Kyle

2003-01-01

Recommends a research-based process for rehabilitation agencies assisting clients with self-employment. Steps include counselor-client dialog about self-employment, use of assessment tools and resources, education/training, development of a business plan, start-up funding from the agency and other sources, business start-up, and evaluation of…

40 CFR 63.7750 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... you start up your iron and steel foundry before April 22, 2004, you must submit your initial notification no later than August 20, 2004. (c) If you start up your new iron and steel foundry on or after... business on the 30th calendar day following completion of the initial compliance demonstration. (2) For...

77 FR 26304 - Prospective Grant of Exclusive License: Development of Ocular Therapeutics Utilizing the Peptide...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-03

... Biotech, a Texas corporation, having a place of business in Dallas, Texas, to practice the inventions... E-008-2004/0. The exclusive license is one which qualifies under the Start-Up License Agreement... start up exclusive license will be royalty bearing and will comply with the terms and conditions of 35 U...

40 CFR 63.9535 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

...(b)(2), if you start up your affected source before October 18, 2002, you must submit your initial... start up your new affected source on or after October 18, 2002, you must submit your initial... status before the close of business on the 30th calendar day following the completion of the initial...

Start-Up Rhetoric in Eight Speeches of Barack Obama

ERIC Educational Resources Information Center

O'Connell, Daniel C.; Kowal, Sabine; Sabin, Edward J.; Lamia, John F.; Dannevik, Margaret

2010-01-01

Our purpose in the following was to investigate the start-up rhetoric employed by U.S. President Barack Obama in his speeches. The initial 5 min from eight of his speeches from May to September of 2009 were selected for their variety of setting, audience, theme, and purpose. It was generally hypothesized that Barack Obama, widely recognized for…

Entrepreneurship Education: Enhancing or Discouraging Graduate Start-Up at the University of Pretoria

ERIC Educational Resources Information Center

Botha, Melodi; Ras, Rochelle

2016-01-01

In-depth interviews were conducted with a sample of BCom Entrepreneurship graduates, as well as a control group to determine whether the exposure to entrepreneurship education can enhance actual business start-up. Information was collected on how they experienced the learning approaches, and the value which they had derived from the degree. This…

Neighborhood Economic Enterprises: An Analysis, Survey, and Guide to Resources in Starting Up Neighborhood Enterprises.

ERIC Educational Resources Information Center

Kotler, Neil G.

This pamphlet provides information on the history of and current trends toward neighborhood economic enterprises and provides guidance for setting up such enterprises. A bibliography of books, articles, and newsletters that have information on how to start and sustain neighborhood businesses and cooperatives is provided. Also included is a list of…

Effect of Start-Up Strategies and Electrode Materials on Carbon Dioxide Reduction on Biocathodes

PubMed Central

Singh, Abhijeet; Hermansson, Malte; Persson, Frank; Schnürer, Anna; Wilén, Britt-Marie; Modin, Oskar

2017-01-01

ABSTRACT The enrichment of CO2-reducing microbial biocathodes is challenging. Previous research has shown that a promising approach could be to first enrich bioanodes and then lower the potential so the electrodes are converted into biocathodes. However, the effect of such a transition on the microbial community on the electrode has not been studied. The goal of this study was thus to compare the start-up of biocathodes from preenriched anodes with direct start-up from bare electrodes and to investigate changes in microbial community composition. The effect of three electrode materials on the long-term performance of the biocathodes was also investigated. In this study, preenrichment of acetate-oxidizing bioanodes did not facilitate the start-up of biocathodes. It took about 170 days for the preenriched electrodes to generate substantial cathodic current, compared to 83 days for the bare electrodes. Graphite foil and carbon felt cathodes produced higher current at the beginning of the experiment than did graphite rods. However, all electrodes produced similar current densities at the end of the over 1-year-long study (2.5 A/m2). Methane was the only product detected during operation of the biocathodes. Acetate was the only product detected after inhibition of the methanogens. Microbial community analysis showed that Geobacter sp. dominated the bioanodes. On the biocathodes, the Geobacter sp. was succeeded by Methanobacterium spp., which made up more than 80% of the population. After inhibition of the methanogens, Acetobacterium sp. became dominant on the electrodes (40% relative abundance). The results suggested that bioelectrochemically generated H2 acted as an electron donor for CO2 reduction. IMPORTANCE In microbial electrochemical systems, living microorganisms function as catalysts for reactions on the anode and/or the cathode. There is a variety of potential applications, ranging from wastewater treatment and biogas generation to production of chemicals. Systems with biocathodes could be used to reduce CO2 to methane, acetate, or other high-value chemicals. The technique can be used to convert solar energy to chemicals. However, enriching biocathodes that are capable of CO2 reduction is more difficult and less studied than enriching bioanodes. The effect of different start-up strategies and electrode materials on the microbial communities that are enriched on biocathodes has not been studied. The purpose of this study was to investigate two different start-up strategies and three different electrode materials for start-up and long-term operation of biocathodes capable of reducing CO2 to valuable biochemicals. PMID:29222104

Long pulse EBW start-up experiments in MAST

DOE PAGES

Shevchenko, V. F.; Baranov, Y. F.; Bigelow, T.; ...

2015-03-12

Start-up technique reported here relies on a double mode conversion (MC) for electron Bernstein wave (EBW) excitation. It consists of MC of the ordinary (O) mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance (ECR) and experiences a subsequent X to EBW MC near the upper hybrid resonance (UHR). Finally the excited EBW mode is totally absorbed at the Doppler shifted ECR. The absorption of EBW remains high even inmore » cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [1]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results were extended to longer RF pulses showing further increase of plasma currents generated by RF power alone. A record current of 73kA has been achieved with 450ms RF pulse of similar power. The current drive enhancement was mainly achieved due to RF pulse extension and further optimisation of the start-up scenario.« less

Long pulse EBW start-up experiments in MAST

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shevchenko, V. F.; Baranov, Y. F.; Bigelow, T.

Start-up technique reported here relies on a double mode conversion (MC) for electron Bernstein wave (EBW) excitation. It consists of MC of the ordinary (O) mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance (ECR) and experiences a subsequent X to EBW MC near the upper hybrid resonance (UHR). Finally the excited EBW mode is totally absorbed at the Doppler shifted ECR. The absorption of EBW remains high even inmore » cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [1]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results were extended to longer RF pulses showing further increase of plasma currents generated by RF power alone. A record current of 73kA has been achieved with 450ms RF pulse of similar power. The current drive enhancement was mainly achieved due to RF pulse extension and further optimisation of the start-up scenario.« less

Long Pulse EBW Start-up Experiments in MAST

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shevchenko, V. F.; Bigelow, Tim S; Caughman, J. B. O.

Start-up technique reported here relies on a double mode conversion (MC) for electron Bernstein wave (EBW) excitation. It consists of MC of the ordinary (0) mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance (ECR) and experiences a subsequent X to EBW MC near the upper hybrid resonance (UHR). Finally the excited EBW mode is totally absorbed at the Doppler shifted ECR. The absorption of EBW remains high even inmore » cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [1]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results were extended to longer RF pulses showing further increase of plasma currents generated by RF power alone. A record current of 73kA has been achieved with 450ms RF pulse of similar power. The current drive enhancement was mainly achieved due to RF pulse extension and further optimisation of the start-up scenario.« less

Effects of Feedstock Sources on Inoculant Acclimatization: Start-up Strategies and Reactor Performance.

PubMed

Yang, Qian; Wei, Liang-Huan; Li, Wei-Zun; Chen, Yu; Ju, Mei-Ting

2017-11-01

Different inoculum sources and acclimatization methods result in different substrate adaptation and biodegradability. To increase straw degradation rate, shorten the digester start-up time, and enhance the biogas production, we domesticated anaerobic sludge by adding microcrystalline cellulose (MCC). During acclimatization, the start-up strategies and reactor performance were investigated to analyze changes in feedstock adaption, biodegradability, and methanogen activity. The effect of the domesticated inoculum was evaluated by testing batch un-pretreated corn stover with a dewatered sludge (DS)-domesticated inoculum as a control. The results showed that (1) using MCC as a substrate rapidly improved microorganism biodegradability and adaptation. (2) MCC as domesticated substrate has relatively stable system and high mass conversion, but with low buffer capacity. (3) Macro- and micronutrients should be added for improving the activity of methanogenic and system's buffer capacity. (4) Using the domesticated inoculums and batch tests to anaerobically digest untreated corn stover yielded rapid biogas production of 292 mL, with an early peak value on the first day. The results indicated that cultivating directional inoculum can efficiently and quickly start-up digester. These investigated results to promote anaerobic digestion of straw for producing biogas speed up the transformation of achievements of biomass solid waste utilization have a positive promoting significance.

Training Materials Developed for Latino Entrepreneurs

ERIC Educational Resources Information Center

Abreo, Christina; Miller, Wayne; Farmer, Frank; Moon, Zola; McCullough, Stacey

2014-01-01

This article describes the materials and training program that Extension created to assist current and potential Latino immigrant entrepreneurs in starting businesses in Arkansas. The content-based educational materials describe the process for starting a new business, government regulatory requirements, start-up costs and considerations, and how…

Retention in care under universal antiretroviral therapy for HIV-infected pregnant and breastfeeding women ('Option B+') in Malawi.

PubMed

Tenthani, Lyson; Haas, Andreas D; Tweya, Hannock; Jahn, Andreas; van Oosterhout, Joep J; Chimbwandira, Frank; Chirwa, Zengani; Ng'ambi, Wingston; Bakali, Alan; Phiri, Sam; Myer, Landon; Valeri, Fabio; Zwahlen, Marcel; Wandeler, Gilles; Keiser, Olivia

2014-02-20

To explore the levels and determinants of loss to follow-up (LTF) under universal lifelong antiretroviral therapy (ART) for pregnant and breastfeeding women ('Option B+') in Malawi. We examined retention in care, from the date of ART initiation up to 6 months, for women in the Option B+ program. We analysed nationwide facility-level data on women who started ART at 540 facilities (n = 21,939), as well as individual-level data on patients who started ART at 19 large facilities (n = 11,534). Of the women who started ART under Option B+ (n = 21,939), 17% appeared to be lost to follow-up 6 months after ART initiation. Most losses occurred in the first 3 months of therapy. Option B+ patients who started therapy during pregnancy were five times more likely than women who started ART in WHO stage 3/4 or with a CD4 cell count 350 cells/μl or less, to never return after their initial clinic visit [odds ratio (OR) 5.0, 95% confidence interval (CI) 4.2-6.1]. Option B+ patients who started therapy while breastfeeding were twice as likely to miss their first follow-up visit (OR 2.2, 95% CI 1.8-2.8). LTF was highest in pregnant Option B+ patients who began ART at large clinics on the day they were diagnosed with HIV. LTF varied considerably between facilities, ranging from 0 to 58%. Decreasing LTF will improve the effectiveness of the Option B+ approach. Tailored interventions, like community or family-based models of care could improve its effectiveness.

Nine-year follow-up of a home-visitation program: a randomized trial.

PubMed

Fergusson, David M; Boden, Joseph M; Horwood, L John

2013-02-01

To evaluate the extent to which a home-visitation program (Early Start) had benefits for child abuse, child behavior, and parental- and family-level benefits to the 9-year follow-up. A randomized controlled trial in which 220 families receiving Early Start were contrasted with a control series of 223 families not receiving the program. Families were enrolled in the program for up to 5 years. Outcomes were assessed at 6 months, annually from 1 year to 6 years, and at 9 years after trial entry. Comparisons between the Early Start and control series showed that families in the Early Start program showed significant (P < .05) benefits in reduced risk of hospital attendance for unintentional injury, lower risk of parent-reported harsh punishment, lower levels of physical punishment, higher parenting competence scores, and more positive child behavioral adjustment scores. Effect sizes (Cohen's "d") ranged from 0.13 to 0.29 (median = 0.25). There were no significant differences (all P values > .05) between the Early Start and control series on a range of measures of parental behavior and family outcomes, including maternal depression, parental substance use, intimate partner violence, adverse economic outcomes, and life stress. The Early Start program was associated with small to moderate benefits in a range of areas relating to child abuse, physical punishment, child behavior, and parenting competence. There was little evidence to suggest that the Early Start program had benefits that extended to the level of parents or family overall.

Bootstrap finance: the art of start-ups.

PubMed

Bhide, A

1992-01-01

Entrepreneurship is more popular than ever: courses are full, policymakers emphasize new ventures, managers yearn to go off on their own. Would-be founders often misplace their energies, however. Believing in a "big money" model of entrepreneurship, they spend a lot of time trying to attract investors instead of using wits and hustle to get their ideas off the ground. A study of 100 of the 1989 Inc. "500" list of fastest growing U.S. start-ups attests to the value of bootstrapping. In fact, what it takes to start a business often conflicts with what venture capitalists require. Investors prefer solid plans, well-defined markets, and track records. Entrepreneurs are heavy on energy and enthusiasm but may be short on credentials. They thrive in rapidly changing environments where uncertain prospects may scare off established companies. Rolling with the punches is often more important than formal plans. Striving to adhere to investors' criteria can diminish the flexibility--the try-it, fix-it approach--an entrepreneur needs to make a new venture work. Seven principles are basic for successful start-ups: get operational fast; look for quick break-even, cash-generating projects; offer high-value products or services that can sustain direct personal selling; don't try to hire the crack team; keep growth in check; focus on cash; and cultivate banks early. Growth and change are the start-up's natural environment. But change is also the reward for success: just as ventures grow, their founders usually have to take a fresh look at everything again: roles, organization, even the very policies that got the business up and running.

Shipboard Aggregate Power Monitoring

DTIC Science & Technology

2009-06-01

low pressure air serves to operate various valves and provide pneumatic power for certain plant equipment. The compressor is an Ingersoll-Rand NAXI...List of Figures Figure 1-1: Raw AC voltage and current measurements for recorded during a motor start-up. (1...filters, valves, etc.) of a given system. Figure 1-1: Raw AC voltage and current measurements recorded during a motor start-up. (1) Figure

USE OF INTEGRATED PLANNING TOOLS FOR REVITALIZATION: SMARTE (U.S.) AND START-UP PLAN (GERMANY)

EPA Science Inventory

The U.S.-German Bilateral Working Group produced two primary products during Phase 3 (2000-2005). SMARTe (Sustainable Management Approaches and Revitalization Tools-electronic) is being developed in the U.S. and the START-UP Plan is being...

40 CFR 63.7130 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) through (j) that apply to you, by the dates specified. (b) As specified in § 63.9(b)(2), if you start up... you start up your affected source. (d) If you are required to conduct a performance test, you must... before the close of business on the 30th calendar day following the completion of the initial compliance...

40 CFR 63.8480 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... start up your affected source before May 16, 2003, you must submit an Initial Notification not later than 120 calendar days after May 16, 2003. (c) As specified in § 63.9(b)(3), if you start up your new... Status, including the performance test results, before the close of business on the 60th calendar day...

40 CFR 63.7950 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) As specified in § 63.9(b)(2), if you start up your affected source before October 8, 2003, you must... in § 63.9(b)(3), if you start up your new or reconstructed affected source on or after the effective... results, before the close of business on the 60th calendar day following the completion of the performance...

40 CFR 63.9640 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... the specified dates. (b) As specified in § 63.9(b)(2), if you start up your affected source before... 30, 2003. (c) As specified in § 63.9(b)(3), if you start up your new affected source on or after... close of business on the 30th calendar day following completion of the initial compliance demonstration...

40 CFR 63.6145 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... specified. (b) As specified in § 63.9(b)(2), if you start up your new or reconstructed stationary combustion... after March 5, 2004. (c) As specified in § 63.9(b), if you start up your new or reconstructed stationary... Compliance Status, including the performance test results, before the close of business on the 60th calendar...

40 CFR 63.8692 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... start up your affected source before April 29, 2003, you must submit an Initial Notification not later than 120 calendar days after April 29, 2003. (c) As specified in § 63.9(b)(3), if you start up your new... close of business on the 60th calendar day following the completion of the performance test according to...

Case Study of a Discontinued Start-Up Engineering Program: Critical Challenges and Lessons Learned

ERIC Educational Resources Information Center

Friess, Wilhelm A.

2017-01-01

The explanatory case study presented here analyzes the factors that have contributed to the failure of a start-up engineering program launched at an off-campus site, and aimed at imparting the first two years of the BSc Mechanical, Electrical, Computer and Civil Engineering utilizing an integrated curriculum. Findings indicate the root cause for…

Steps to Starting a Small Business. Student Notebook.

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. Vocational Studies Center.

This student notebook provides student materials for a program of study made up of a series of community-based activities potentially leading to the start-up of one's own business, while at the same time providing a better understanding of the American economic system of free enterprise. It begins with a glossary. For each of 15 units (1 more unit…

A Guide for Developing Standard Operating Job Procedures for the Tertiary Chemical Treatment - Lime Precipitation Process Wastewater Treatment Facility. SOJP No. 6.

ERIC Educational Resources Information Center

Petrasek, Al, Jr.

This guide describes the standard operating job procedures for the tertiary chemical treatment - lime precipitation process of wastewater treatment plants. Step-by-step instructions are given for pre-start up, start-up, continuous operation, and shut-down procedures. In addition, some theoretical material is presented along with some relevant…

A Guide for Developing Standard Operating Job Procedures for the Grit Removal Process Wastewater Treatment Facility. SOJP No. 2.

ERIC Educational Resources Information Center

Deal, Gerald A.; Montgomery, James A.

This guide describes standard operating job procedures for the grit removal process of wastewater treatment plants. Step-by-step instructions are given for pre-start up inspection, start-up, continuous operation, and shut-down procedures. A description of the equipment used in the process is given. Some theoretical material is presented. (BB)

A Guide for Developing Standard Operating Job Procedures for the Tertiary Multimedia Filtration Process Wastewater Treatment Facility. SOJP No. 7.

ERIC Educational Resources Information Center

Petrasek, Al, Jr.

This guide describes the standard operating job procedures for the tertiary multimedia filtration process of wastewater treatment plants. The major objective of the filtration process is the removal of suspended solids from the reclaimed wastewater. The guide gives step-by-step instructions for pre-start up, start-up, continuous operation, and…

First LNG from North field overcomes feed, start-up problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Redha, A.; Rahman, A.; Al-Thani, N.H.

Qatar Gas LNG is the first LNG project in the gas-development program of the world`s largest gas reservoir, North field. The LNG plant was completed within the budget and schedule. The paper discusses the LNG plant design, LNG storage and loading, alternative mercaptan removal, layout modification, information and control systems, training, data management systems, start-up, and performance testing.

Issues to Consider before Licensing Technology to a Start-Up: Mitigating Risk with Early Planning for the Entire Business Cycle

ERIC Educational Resources Information Center

LaBarge, Jeffrey H.

2005-01-01

If done correctly, licensing technology to a start-up company provides a great opportunity for a university to commercialize its technology and generate good will. If done incorrectly, however, the venture may jeopardize the technology's value and adversely affect the university's reputation within the business and academic communities. Before…

The Perfect Pairing: The Adult Learner and the Boutique Winery in the Start-Up Phase

ERIC Educational Resources Information Center

Heath-Simpson, Delta F.

2011-01-01

The purpose of this phenomenological study was to understand and describe the lived experiences of adult learners who are owners and managers of small winery businesses operating in the start-up phase of the organizational life cycle. The study explored and identified the meaning of adult learning in the entrepreneurial context and its affect on…

Highly-Skilled Colombian Immigrants in Spain: Do They Have to Return Home to Start up in Business?

ERIC Educational Resources Information Center

Bulla, Francisco Javier Matiz; Hormiga, Esther

2011-01-01

Purpose: The purpose of this paper is to understand why high-skilled immigrants from a developing country (Colombia) are returning to their home country to create businesses instead of starting up in their host country (Spain). Design/methodology/approach: A case study methodology was used to present the experiences of three high-skilled…

Lessons Learned in Dreamland: How a Small Urban Charter School Overcame Start-Up Woes to Increase Reading Scores 28 Percent

ERIC Educational Resources Information Center

Carter, Carolyn J.

2011-01-01

Charter school administrators weathered start-up woes, among them challenging students with unmet needs, verbal assaults, dwindling student enrollment, and a first-year budget deficit exceeding $200,000 to implement a reading improvement strategy that holds promise for helping at-risk students read better, a point particularly underscored…

Start-Up of a Pulsed Beam Free Electron Laser (FEL) Oscillator

DTIC Science & Technology

1983-04-01

By slightly increasing the frequency of the R.F. accelerating field, Wacc during the start-up period, i.e., decreasing the beam pulse separation, the...levels. The required fractional increase in Wacc is 16L 1- 6L2 1/Lbow 10 - 6 for the parameters of ref. (3,4). The same 6 effect may also be realized

Start-up and stabilization of an Anammox process from a non-acclimatized sludge in CSTR.

PubMed

Bagchi, Samik; Biswas, Rima; Nandy, Tapas

2010-09-01

Development of an Anammox (anaerobic ammonium oxidation) process using non-acclimatized sludge requires a long start-up period owing to the very slow growth rate of Anammox bacteria. This article addresses the issue of achieving a shorter start-up period for Anammox activity in a well-mixed continuously stirred tank reactor (CSTR) using non-acclimatized anaerobic sludge. Proper selection of enrichment conditions and low stirring speed of 30 +/- 5 rpm resulted in a shorter start-up period (82 days). Activity tests revealed the microbial community structure of Anammox micro-granules. Ammonia-oxidizing bacteria (AOB) were found on the surface and on the outer most layers of granules while nitrite-oxidizing bacteria (NOB) and Anammox bacteria were present inside. Fine-tuning of influent NO2(-)/NH4+ ratio allowed Anammox activity to be maintained when mixed microbial populations were present. The maximum nitrogen removal rate achieved in the system was 0.216 kg N/(m(3) day) with a maximum specific nitrogen removal rate of 0.434 g N/(g VSS day). During the study period, Anammox activity was not inhibited by pH changes and free ammonia toxicity.

Degradation Study by Start-Up/Shut-Down Cycling of Superhydrophobic Electrosprayed Catalyst Layers Using a Localized Reference Electrode Technique.

PubMed

Ferreira-Aparicio, Paloma; Chaparro, Antonio M; Folgado, M Antonia; Conde, Julio J; Brightman, Edward; Hinds, Gareth

2017-03-29

Degradation of a polymer electrolyte membrane fuel cell (PEMFC) with electrosprayed cathode catalyst layers is investigated during cyclic start-up and shut-down events. The study is carried out within a single cell incorporating an array of reference electrodes that enables measurement of cell current as a function of local cathode potential (localized polarization curves). Accelerated degradation of the cell by start-up/shut-down cycling gives rise to inhomogeneous performance loss, which is more severe close to the gas outlet and occurs predominantly during start-up. The degradation consists primarily of loss of cathode catalyst activity and increase in cell internal resistance, which is attributed to carbon corrosion and Pt aggregation in both anode and cathode. Cells with an electrosprayed cathode catalyst layer show lower degradation rates during the first 100 cycles, compared with those of a conventional gas diffusion electrode. This difference in behavior is attributed to the high hydrophobicity of the electrosprayed catalyst layer microstructure, which retards the kinetics of corrosion of the carbon support. In the long term, however, the degradation rate is dominated by the Pt/C ratio in the cathode catalyst layer.

Effect of thiosulfate on rapid start-up of sulfur-based reduction of high concentrated perchlorate: A study of kinetics, extracellular polymeric substances (EPS) and bacterial community structure.

PubMed

Guo, Jianbo; Zhang, Chao; Lian, Jing; Lu, Caicai; Chen, Zhi; Song, Yuanyuan; Guo, Yankai; Xing, Yajuan

2017-11-01

Perchlorate (ClO 4 - ) contamination is more and more concerned due to the hazards to humans. Based on the common primary bacterium (Helicobacteraceae) of both thiosulfate-acclimated sludge (T-Acc) and sulfur-acclimated sludge (S-Acc) for perchlorate reduction, the rapid start-up of sulfur-based perchlorate reduction reactor (SBPRR) was hypothesized by inoculating T-Acc. Furthermore, the performance of SBPRR, the SO 4 2- yield, kinetics of ClO 4 - reduction and the extracellular polymeric substances (EPS) of biofilm confirmed the hypothesis. The start-up time of R3 (reactor inoculating T-Acc) was 0.18 and 0.21 times that of R1 (control) and R2 (reactor with the influent containing thiosulfate), respectively. The SO 4 2- yield of R3 was lower than that of R2 and R1 with perchlorate removal rate 166.7mg/(Lh). The kinetic study and EPS demonstrated that inoculating T-Acc was beneficial for the development of biofilm. Consequently, the present study indicated that SBPRR can be rapidly and successfully started-up via inoculation of T-Acc. Copyright © 2017 Elsevier Ltd. All rights reserved.

Time-Frequency Analysis of Rocket Nozzle Wall Pressures During Start-up Transients

NASA Technical Reports Server (NTRS)

Baars, Woutijn J.; Tinney, Charles E.; Ruf, Joseph H.

2011-01-01

Surveys of the fluctuating wall pressure were conducted on a sub-scale, thrust- optimized parabolic nozzle in order to develop a physical intuition for its Fourier-azimuthal mode behavior during fixed and transient start-up conditions. These unsteady signatures are driven by shock wave turbulent boundary layer interactions which depend on the nozzle pressure ratio and nozzle geometry. The focus however, is on the degree of similarity between the spectral footprints of these modes obtained from transient start-ups as opposed to a sequence of fixed nozzle pressure ratio conditions. For the latter, statistically converged spectra are computed using conventional Fourier analyses techniques, whereas the former are investigated by way of time-frequency analysis. The findings suggest that at low nozzle pressure ratios -- where the flow resides in a Free Shock Separation state -- strong spectral similarities occur between fixed and transient conditions. Conversely, at higher nozzle pressure ratios -- where the flow resides in Restricted Shock Separation -- stark differences are observed between the fixed and transient conditions and depends greatly on the ramping rate of the transient period. And so, it appears that an understanding of the dynamics during transient start-up conditions cannot be furnished by a way of fixed flow analysis.

Third Grade Follow-Up to the Head Start Impact Study: Final Report. OPRE Report 2012-45

ERIC Educational Resources Information Center

Puma, Mike; Bell, Stephen; Cook, Ronna; Heid, Camilla; Broene, Pam; Jenkins, Frank; Mashburn, Andrew; Downer, Jason

2012-01-01

In the 1998 reauthorization of Head Start, Congress mandated that the US Department of Health and Human Services (DHHS) determine, on a national level, the impact of Head Start on the children it serves. As noted by the Advisory Committee on Head Start Research, this legislative mandate required that the impact study address two main research…

Wireless "Jump" Starts for Partly Disabled Equipment

NASA Technical Reports Server (NTRS)

Castle, K. D.

1986-01-01

Equipment activated when normal remote starting does not work Beam from nearby station first carries raw energy and then subsystemactivating signals to equipment crippled by discharged storage batteries. Operators start up equipment without approaching it under hazardous conditions. Potential terrestrial applications for scheme include starting of robots on such remotely-controlled hazardous tasks as handling of explosives or retrieval or deposition of objects in hostile environments.

The New Schools Handbook: Strategic Advice for Successful School Start-Up in Partnership with School District Officials, Staff and Community Members.

ERIC Educational Resources Information Center

Lake, Robin; Winger, Abigail; Petty, Jeff

This guide provides an overview of the school development process. It is intended for anyone starting a new school, whether it be a public, private, or charter school, but focuses on starting a school within the traditional school-district structure. Section 1, "Getting Started," discusses identifying the basis of legal authority; building a…

Entrepreneurism from the ground up: Entrepreneurism, innovation, and responsiveness in a start-up university

NASA Astrophysics Data System (ADS)

Wong, Michael Paul Anthony

Colleges and universities are under increased pressure from internal and external constituencies for increased innovation and responsiveness. Entrepreneurial private industry models such as start-up businesses, corporate ventures and spin-off organizations have been recognized for their ability to quickly adapt to changing business environments and rapidly innovate to take advantage of new opportunities. This case study investigates these claims with regard to a start-up university founded with the identity of an entrepreneurial, interdisciplinary institution that prepares graduate level students for leadership careers as entrepreneurs in the bio-tech industry. By interviewing twenty-four administrators, faculty, and members of the Board of Trustees, including all but one of the founding full-time faculty, I present an "insider's" depiction of the lived experience of those most closely associated with the founding and subsequent institution building of this unique higher education organization. Initial chapters present a theory of higher education organizations, derived from Birnbaum (1988) and Bolman and Deal (1991), as driven by two primary tasks: resolving identity and establishing power and resources in relation to that identity. I also present Russell and Russell's (1992) theory of "entrepreneurial posture" in relation to a higher education organization. Subsequent chapters analyze the start-up university's environment, strategy, culture, and structure within the framework of the two primary organizational tasks and Russell and Russell's (1992) definition of an entrepreneurial organization.

Improvements to CHI Plasma Start-up and Ramp-up in NSTX

NASA Astrophysics Data System (ADS)

Jarboe, T. R.; Raman, R.; Nelson, B. A.; Mueller, D.; Bell, M. G.; Roquemore, L.; Kugel, H. W.; Soukhanovskii, V.

2009-11-01

Experiments in NSTX have now demonstrated the savings of central solenoid inductive flux after coupling of toroidal plasmas produced by the technique of Coaxial Helicity Injection (CHI) to inductive sustainment and ramp-up of the toroidal plasma current. In these discharges, the central solenoid with zero pre-charge was used to apply an inductive loop voltage to the decaying CHI started discharges. The coupled discharges ramped up to 800kA without the benefit of auxiliary heating. Inductive flux savings was realized as a result of an effort to reduce the influx of low-Z impurities during the plasma start-up phase. This was achieved through the use of 400ms long CHI discharges produced using a DC rectifier power supply to ablate low-Z surface impurities from the lower divertor electrodes, followed by the use of Lithium evaporative coatings and an effort to reduce spurious arcs in the upper divertor region by controlling the extent of CHI plasma growth in the vessel. Previous work on NSTX has shown that CHI started discharges after coupling to neutral beam heated discharges can transition to an H-mode. These important new results from NSTX demonstrate that CHI is a viable solenoid-free plasma startup method for future STs and Tokamaks. This work supported by U.S. DOE Contracts # DE-AC02-09CH11466 and DE-FG02-99ER54519 AM08.

Creating E-Commerce Start-Ups with Information Systems Students: Lessons Learned from New Venture Successes and Failures

ERIC Educational Resources Information Center

Abrahams, Alan

2010-01-01

In this paper, we review a variety of e-commerce startups created by senior information systems students, under the author's guidance, over a number of years at multiple universities. We compare the characteristics of the start-ups and comment on various factors which appear to have contributed to their success or failure. Our recommendations are…

40 CFR 63.7189 - What applications and notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... specified. (b) As specified in § 63.9(b)(2), if you start up your affected source before May 22, 2003, you... specified in § 63.9(b)(3), if you start up your new or reconstructed affected source on or after May 22... Compliance Status before the close of business on the 30th calendar day following the completion of the...

Evaluating the Prince's Trust's Young People's Business Start-Up Programme, 1994?1999: Reflections and Policy Implications

ERIC Educational Resources Information Center

Koutsoukos, Stratis; Shutt, John; Sutherland, John

2005-01-01

The authors were the principals in the evaluation of the Prince's Trust's Young People's Business Start-up Programme, 1994?1999, as it operated nationally in the UK and in the Yorkshire and the Humber region of England. In this paper they report the methodologies used in the evaluation and the key findings. They then use their reflections on both…

N.S. SAVANNAH, DRAFT OF FINAL SAFEGUARDS REPORT TEST, START-UP AND TRIALS, NEW YORK SHIPBUILDING CORPORATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1960-04-01

The N. S. Savannah program for testing, start-up, and initial operation of all reactor and propulsion components and systems is discussed. Definitions of test phases are given and various stages of the test program are outlined. A list of tests for the various reactor, propulsion, and other system components is included. (C.J.G.)

A Guide for Developing Standard Operating Job Procedures for the Pump Station Process Wastewater Treatment Facility. SOJP No. 3.

ERIC Educational Resources Information Center

Perley, Gordon F.

This is a guide for standard operating job procedures for the pump station process of wastewater treatment plants. Step-by-step instructions are given for pre-start up inspection, start-up procedures, continuous routine operation procedures, and shut-down procedures. A general description of the equipment used in the process is given. Two…

Questions abound as start-up nears for physician data bank.

PubMed

Gardner, E; Wagner, L; Burda, D

1990-07-02

The start-up of the National Practitioner Data Bank is only weeks away, but hospitals and physicians still are raising questions about the system's pros and cons. While most laud the data bank's original mission--to prevent practitioners from concealing a history of incompetence--many physicians claim the scope of the system has grown too big and fear abuse of the information.

Digital Transformation and Disruption of the Health Care Sector: Internet-Based Observational Study.

PubMed

Herrmann, Maximilian; Boehme, Philip; Mondritzki, Thomas; Ehlers, Jan P; Kavadias, Stylianos; Truebel, Hubert

2018-03-27

Digital innovation, introduced across many industries, is a strong force of transformation. Some industries have seen faster transformation, whereas the health care sector only recently came into focus. A context where digital corporations move into health care, payers strive to keep rising costs at bay, and longer-living patients desire continuously improved quality of care points to a digital and value-based transformation with drastic implications for the health care sector. We tried to operationalize the discussion within the health care sector around digital and disruptive innovation to identify what type of technological enablers, business models, and value networks seem to be emerging from different groups of innovators with respect to their digital transformational efforts. From the Forbes 2000 and CBinsights databases, we identified 100 leading technology, life science, and start-up companies active in the health care sector. Further analysis identified projects from these companies within a digital context that were subsequently evaluated using the following criteria: delivery of patient value, presence of a comprehensive and distinctive underlying business model, solutions provided, and customer needs addressed. Our methodological approach recorded more than 400 projects and collaborations. We identified patterns that show established corporations rely more on incremental innovation that supports their current business models, while start-ups engage their flexibility to explore new market segments with notable transformations of established business models. Thereby, start-ups offer higher promises of disruptive innovation. Additionally, start-ups offer more diversified value propositions addressing broader areas of the health care sector. Digital transformation is an opportunity to accelerate health care performance by lowering cost and improving quality of care. At an economic scale, business models can be strengthened and disruptive innovation models enabled. Corporations should look for collaborations with start-up companies to keep investment costs at bay and off the balance sheet. At the same time, the regulatory knowledge of established corporations might help start-ups to kick off digital disruption in the health care sector. ©Maximilian Herrmann, Philip Boehme, Thomas Mondritzki, Jan P Ehlers, Stylianos Kavadias, Hubert Truebel. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 27.03.2018.

Digital Transformation and Disruption of the Health Care Sector: Internet-Based Observational Study

PubMed Central

Mondritzki, Thomas; Ehlers, Jan P; Kavadias, Stylianos

2018-01-01

Background Digital innovation, introduced across many industries, is a strong force of transformation. Some industries have seen faster transformation, whereas the health care sector only recently came into focus. A context where digital corporations move into health care, payers strive to keep rising costs at bay, and longer-living patients desire continuously improved quality of care points to a digital and value-based transformation with drastic implications for the health care sector. Objective We tried to operationalize the discussion within the health care sector around digital and disruptive innovation to identify what type of technological enablers, business models, and value networks seem to be emerging from different groups of innovators with respect to their digital transformational efforts. Methods From the Forbes 2000 and CBinsights databases, we identified 100 leading technology, life science, and start-up companies active in the health care sector. Further analysis identified projects from these companies within a digital context that were subsequently evaluated using the following criteria: delivery of patient value, presence of a comprehensive and distinctive underlying business model, solutions provided, and customer needs addressed. Results Our methodological approach recorded more than 400 projects and collaborations. We identified patterns that show established corporations rely more on incremental innovation that supports their current business models, while start-ups engage their flexibility to explore new market segments with notable transformations of established business models. Thereby, start-ups offer higher promises of disruptive innovation. Additionally, start-ups offer more diversified value propositions addressing broader areas of the health care sector. Conclusions Digital transformation is an opportunity to accelerate health care performance by lowering cost and improving quality of care. At an economic scale, business models can be strengthened and disruptive innovation models enabled. Corporations should look for collaborations with start-up companies to keep investment costs at bay and off the balance sheet. At the same time, the regulatory knowledge of established corporations might help start-ups to kick off digital disruption in the health care sector. PMID:29588274

Assessment of start-up mechanisms for anaerobic fluidized bed reactor in series based on mathematical simulation

NASA Astrophysics Data System (ADS)

Sudibyo, Hanifrahmawan; Guntama, Dody; Budhijanto, Wiratni

2017-05-01

Anaerobic digestion is associated with long hydraulic residence time and hence leads to huge reactor volume, especially for high rate input to the reactor. To overcome this major drawback, one of the possibilities is optimizing the schemes of reactor configuration and start-up mechanisms. This study aimed to determine the most promising start-up mechanism for anaerobic digestion reactors in series, with respect to the shortest hydraulic residence time to reach the highest biogas production rate. The reactor to be studied is anaerobic fluidized bed reactor (AFBR) which is known as the most efficient reactor for high organic loading rate. Case to be studied is landfill leachate digestion. Although reactor optimization can be conducted experimentally, it could be expensive and time consuming. This study proposed the utilization of mathematical modeling to screen the possibilities towards the best options to be verified experimentally. Kinetic study of landfill leachate anaerobic digestion was first conducted to depict the rate of microbial growth and the rate of substrate consumption. Kinetics constants obtained from this batch experiment were then used in the mathematical model representing AFBR. Several mechanisms were simulated in this study. In the first mechanism, all digesters were started simultaneously. In the second mechanism, each digester was started until it achieved steady-state condition before the next digester was started. The third mechanism was start-up scenario for single reactor as opposed to the previous two mechanisms. These all three mechanisms were simulated for either one-through stream and recycling a portion of the reactor effluent. The mathematical simulation result was used to evaluate each mechanism based on hydraulic residence time required for all digesters in series to reach the steady-state condition, the extent of pollutant removal, and the rate of biogas production. In the need of high sCOD removal, the second mechanism emerged as the best one.

Strategies for merging microbial fuel cell technologies in water desalination processes: Start-up protocol and desalination efficiency assessment

NASA Astrophysics Data System (ADS)

Borjas, Zulema; Esteve-Núñez, Abraham; Ortiz, Juan Manuel

2017-07-01

Microbial Desalination Cells constitute an innovative technology where microbial fuel cell and electrodialysis merge in the same device for obtaining fresh water from saline water with no energy-associated cost for the user. In this work, an anodic biofilm of the electroactive bacteria Geobacter sulfurreducens was able to efficiently convert the acetate present in synthetic waste water into electric current (j = 0.32 mA cm-2) able to desalinate water. .Moreover, we implemented an efficient start-up protocol where desalination up to 90% occurred in a desalination cycle (water production:0.308 L m-2 h-1, initial salinity: 9 mS cm-1, final salinity: <1 mS cm-1) using a filter press-based MDC prototype without any energy supply (excluding peristaltic pump energy). This start-up protocol is not only optimized for time but also simplifies operational procedures making it a more feasible strategy for future scaling-up of MDCs either as a single process or as a pre-treatment method combined with other well established desalination technologies such as reverse osmosis (RO) or reverse electrodialysis.

Windows VPN Set Up | High-Performance Computing | NREL

Science.gov Websites

it in your My Documents folder Configure the client software using that conf file Start the TEXT NEEDED Configure the Client Software Start the Endian Connect App. You'll configure the connection using the hpcvpn-win.conf file, uncheck the "save password" link, and add your UserID. Start

20 CFR 218.26 - Work started after annuity beginning date.

Code of Federal Regulations, 2010 CFR

2010-04-01

... rights to return to work for a railroad employee before starting any new work. (2) Age annuity. An... employee, spouse or divorced spouse gives up all rights to return to work for a railroad employer before... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Work started after annuity beginning date...

Canadian biotechnology start-ups, 1991-1997: the role of incumbents' patents and strategic alliances in controlling competition.

PubMed

Calabrese, T; Baum, J A; Silverman, B S

2000-12-01

Fligstein (1996) contends that organizations act to exploit the institutional context in which they are embedded so as to stabilize the competition they face. Drawing on Fligstein's theoretical analysis, we conceptualize incumbent biotechnology firms' patent-ing and alliance-building activities as attempts to stabilize and control potential competition and analyze how these activities shape rates of founding in the Canadian biotechnology industry. We find that increases in the level and concentration of incumbents' patenting discourage founding, particularly in human application sectors of the industry where development and approval processes are more costly and time consuming. Incumbents' horizontal alliances depress start-ups; vertical alliances stimulate start-ups. Our findings highlight how technology appropriation and strategic alliances structure the competitive dynamics and evolution of high-technology, knowledge-intensive industries.

Lessons learned: design, start-up, and operation of cryogenic systems

NASA Astrophysics Data System (ADS)

Bell, W. M.; Bagley, R. E.; Motew, S.; Young, P.-W.

2014-11-01

Cryogenic systems involving a pumped cryogenic fluid, such as liquid nitrogen (LN2), require careful design since the cryogen is close to its boiling point and cold. At 1 atmosphere, LN2 boils at 77.4 K (-320.4 F). These systems, typically, are designed to transport the cryogen, use it for process heat removal, or for generation of gas (GN2) for process use. As the design progresses, it is important to consider all aspects of the design including, cryogen storage, pressure control and safety relief systems, thermodynamic conditions, equipment and instrument selection, materials, insulation, cooldown, pump start-up, maximum design and minimum flow rates, two phase flow conditions, heat flow, process control to meet and maintain operating conditions, piping integrity, piping loads on served equipment, warm-up, venting, and shut-down. "Cutting corners" in the design process can result in stalled start-ups, field rework, schedule hits, or operational restrictions. Some of these "lessoned learned" are described in this paper.

A 190 mV start-up and 59.2% efficiency CMOS gate boosting voltage doubler charge pump in 0.18 µm standard CMOS process for energy harvesting

NASA Astrophysics Data System (ADS)

Yoshida, Minori; Miyaji, Kousuke

2018-04-01

A start-up charge pump circuit for an extremely low input voltage (V IN) is proposed and demonstrated. The proposed circuit uses an inverter level shifter to generate a 2V IN voltage swing to the gate of both main NMOS and PMOS power transistors in a charge pump to reduce the channel resistance. The proposed circuit is fully implemented in a standard 0.18 µm CMOS process, and the measurement result shows that a minimum input voltage of 190 mV is achieved and output power increases by 181% compared with the conventional forward-body-bias scheme at a 300 mV input voltage. The proposed scheme achieves a maximum efficiency of 59.2% when the input voltage is 390 mV and the output current is 320 nA. The proposed circuit is suitable as a start-up circuit in ultralow power energy harvesting power management applications to boost-up from below threshold voltage.

Head Start: Undercover Testing Finds Fraud and Abuse at Selected Head Start Centers. Testimony before the Committee on Education and Labor, House of Representatives. GAO-10-733T

ERIC Educational Resources Information Center

Kutz, Gregory D.

2010-01-01

The Head Start program, overseen by the Department of Health and Human Services and administered by the Office of Head Start, provides child development services primarily to low-income families and their children. Federal law allows up to 10 percent of enrolled families to have incomes above 130 percent of the poverty line--GAO (Government…

Industrial Base Actions in a Period of Rising Tensions.

DTIC Science & Technology

1982-08-01

termination liability includin~g those available under Title 3 of - the Defense Production Act (DPA). e Encourage the use of experienced contractor or...start up new suppliers, offering long-term commitments and assuming liability for start-up costs would probably be most effective. Also, the general...and termination liability in the event - of cancellation) to lower-tier firms; *support the extension of DNS/DPS ratings by the Commerce Department to

Treating Gulf War Illness with Novel Anti-Inflammatories: A Screening of Botantical Microglia Modulators

DTIC Science & Technology

2016-10-01

approval and initiated advertising , recruitment, participant screening, participant enrollment, and the study protocol. All start up subtasks have been...be made to enroll these during the next reporting period. Advertisement , recruitment, screening, and enrollment are ongoing as we work toward the...Regulatory Approvals 100% Completed. • Task 3: Start up 100% Completed. Milestone: Protocol ready to begin—Completed • Task 4: Advertisement 40

SUNIST Microwave Power System

NASA Astrophysics Data System (ADS)

Feng, Songlin; Yang, Xuanzong; Feng, Chunhua; Wang, Long; Rao, Jun; Feng, Kecheng

2005-06-01

Experiments on the start-up and formation of spherical tokamak plasmas by electron cyclotron heating alone without ohmic heating and electrode discharge assisted electron cyclotron wave current start-up will be carried out on the SUNIST (Sino United Spherical Tokamak) device. The 2.45 GHz/100kW/30 ms microwave power system and 1000 V/50 A power supply for electrode discharge are ready for experiments with non-inductive current drive.

Support Policies for Business Start-ups and the Role of Training. National Reports from France, Italy, Spain, United Kingdom, and Synthesis Report.

ERIC Educational Resources Information Center

Prieto, Jose Maria; And Others

This publication contains four national studies, conducted in Spain, France, the United Kingdom, and Italy, that collected data on the role of training as an element of support for business start-up and as an essential factor for the survival of newly established businesses. The study of the Spanish situation examines public and private bodies…

On a difficulty in eigenfunction expansion solutions for the start-up of fluid flow

NASA Astrophysics Data System (ADS)

Christov, Ivan C.

2015-11-01

Most mathematics and engineering textbooks describe the process of ``subtracting off'' the steady state of a linear parabolic partial differential equation as a technique for obtaining a boundary-value problem with homogeneous boundary conditions that can be solved by separation of variables (i.e., eigenfunction expansions). While this method produces the correct solution for the start-up of the flow of, e.g., a Newtonian fluid between parallel plates, it can lead to erroneous solutions to the corresponding problem for a class of non-Newtonian fluids. We show that the reason for this is the non-rigorous enforcement of the start-up condition in the textbook approach, which leads to a violation of the principle of causality. Nevertheless, these boundary-value problems can be solved correctly using eigenfunction expansions, and we present the formulation that makes this possible (in essence, an application of Duhamel's principle). The solutions obtained by this new approach are shown to agree identically with those obtained by using the Laplace transform in time only, a technique that enforces the proper start-up condition implicitly (hence, the same error cannot be committed). Supported, in part, by NSF Grant DMS-1104047 and the U.S. DOE (Contract No. DE-AC52-06NA25396) through the LANL/LDRD Program.

Experimental Study on the Thermal Start-Up Performance of the Graphene/Water Nanofluid-Enhanced Solar Gravity Heat Pipe.

PubMed

Zhao, Shanguo; Xu, Guoying; Wang, Ning; Zhang, Xiaosong

2018-01-28

The solar gravity heat pipe has been widely used for solar thermal water heating because of its high efficient heat transfer and thermal diode characteristics. Operated on fluctuant and low intensity solar radiation conditions, a solar gravity heat pipe may frequently start up. This severely affects its solar collection performance. To enhance the thermal performance of the solar gravity heat pipe, this study proposes using graphene/water nanofluid as the working fluid instead of deionized water. The stability of the prepared graphene/water nanofluid added with PVP was firstly investigated to obtain the optimum mass ratios of the added dispersant. Thermophysical properties-including the thermal conductivity and viscosity-of nanofluid with various graphene nanoplatelets (GNPs) concentrations were measured at different temperatures for further analysis. Furthermore, based on the operational evaluation on a single heat pipe's start-up process, the performance of nanofluid-enhanced solar gravity heat pipes using different concentrations of GNPs were compared by using water heating experiments. Results indicated that the use of 0.05 wt % graphene/water nanofluid instead of water could achieve a 15.1% and 10.7% reduction in start-up time under 30 and 60 W input heating conditions, respectively. Consequently, a higher thermal efficiency for solar collection could be expected.

Experimental Study on the Thermal Start-Up Performance of the Graphene/Water Nanofluid-Enhanced Solar Gravity Heat Pipe

PubMed Central

Zhao, Shanguo; Xu, Guoying; Wang, Ning; Zhang, Xiaosong

2018-01-01

The solar gravity heat pipe has been widely used for solar thermal water heating because of its high efficient heat transfer and thermal diode characteristics. Operated on fluctuant and low intensity solar radiation conditions, a solar gravity heat pipe may frequently start up. This severely affects its solar collection performance. To enhance the thermal performance of the solar gravity heat pipe, this study proposes using graphene/water nanofluid as the working fluid instead of deionized water. The stability of the prepared graphene/water nanofluid added with PVP was firstly investigated to obtain the optimum mass ratios of the added dispersant. Thermophysical properties—including the thermal conductivity and viscosity—of nanofluid with various graphene nanoplatelets (GNPs) concentrations were measured at different temperatures for further analysis. Furthermore, based on the operational evaluation on a single heat pipe’s start-up process, the performance of nanofluid-enhanced solar gravity heat pipes using different concentrations of GNPs were compared by using water heating experiments. Results indicated that the use of 0.05 wt % graphene/water nanofluid instead of water could achieve a 15.1% and 10.7% reduction in start-up time under 30 and 60 W input heating conditions, respectively. Consequently, a higher thermal efficiency for solar collection could be expected. PMID:29382094

Start-up and incremental practice expenses for behavior change interventions in primary care.

PubMed

Dodoo, Martey S; Krist, Alex H; Cifuentes, Maribel; Green, Larry A

2008-11-01

If behavior-change services are to be offered routinely in primary care practices, providers must be appropriately compensated. Estimating what is spent by practices in providing such services is a critical component of establishing appropriate payment and was the objective of this study. In-practice expenditure data were collected for ten different interventions, using a standardized instrument in 29 practices nested in ten practice-based research networks across the U.S. during 2006-2007. The data were analyzed using standard templates to create credible estimates of the expenses incurred for both the start-up period and the implementation phase of the interventions. Average monthly start-up expenses were $1860 per practice (SE=$455). Most start-up expenditures were for staff training. Average monthly incremental costs were $58 ($15 for provision of direct care [SE=$5]; $43 in overhead [SE=$17]) per patient participant. The bulk of the intervention expenditures was spent on the recruitment and screening of patient participants. Primary care practices must spend money to address their patients' unhealthy behaviors--at least $1860 to initiate systematic approaches and $58 monthly per participating patient to implement the approaches routinely. Until primary care payment systems incorporate these expenses, it is unlikely that these services will be readily available.

Improvement of start-up and nitrogen removal of the anammox process in reactors inoculated with conventional activated sludge using biofilm carrier materials.

PubMed

Lu, Yi-Feng; Ma, Li-Juan; Ma, Lan; Shan, Bei; Chang, Jun-Jun

2018-01-01

The start-up of the anaerobic ammonium oxidation (anammox) process in three up-flow column reactors seeded with common mixed activated sludge and added with three materials, sponge (R1), sponge + volcanic rock (R2) and sponge + charcoal (R3), as carriers for biofilm formation were comparatively investigated in this study. The supplement of volcanic rock and charcoal could significantly shorten the start-up time of the anammox process, which primarily occurred in the activity-enhanced phase, with ammonium and nitrite removal efficiencies stabilized above 92.5% and 93.4% after an operation period of 145, 105 and 121 d for R1, R2 and R3, respectively. After the successful anammox start-up, R2 performed significantly better in TN removal (p < .05), achieving an average rate of 91.0% and 191.5 g N m -3  d -1 compared to R1 of 88.4% and 172.1 g N m -3  d -1 , and R3 of 89.9% and 180.1 g N m -3  d -1 in the steady running phase. The ratios of consumed [Formula: see text] and generated [Formula: see text]/consumed [Formula: see text] after anammox start-up were lower than the theoretical values, probably suggesting the simultaneous existences of anammox, denitrification as well as nitrification processes in the reactors. A reddish brown biofilm was wrapped on the carriers and morphological detection of biofilm displayed the presentations of thick and compact floc aggregates and some filamentous bacteria on the sponge, and spherical-, ovoid- and shortrod-shaped microorganisms on the volcanic rock and charcoal. Using porous material as carrier for biofilm development is an effective strategy for practical application of the anammox reactor.

Likelihood of Starting Dialysis after Incident Fistula Creation

PubMed Central

Quinn, Robert R.; Garg, Amit X.; Kim, S. Joseph; Wald, Ron; Paterson, J. Michael

2012-01-01

Summary Background and objectives Guidelines promote early fistula creation to avoid central venous catheter use. This practice may lead to fistula creations in patients who never receive dialysis. The objective of this study was to estimate the risk of fistula nonuse with long-term follow-up. Design, setting, participants, & measurements Administrative health data identified 1929 predialysis adults who had their first fistula creation between April of 2002 and March of 2006. Patients were followed for a minimum of 2 years or until they began dialysis, received a kidney transplant, or died. Results The median follow-up times in patients who started dialysis, died without receiving dialysis, and remained in predialysis were 6.1, 11.5, and 38.7 months, respectively. Eighty-one percent of patients initiated dialysis; 9% of patients died without receiving dialysis, and 10% of patients remained predialysis. Forty percent of patients had their first fistula creation 3–12 months before initiating dialysis (the recommended window). Thirty percent were created within 90 days of starting dialysis; 30% were created more than 1 year before starting dialysis, and 10% were created more than 2 years before starting dialysis. Older patients, females, and patients with less comorbidity were not as likely to initiate dialysis after incident fistula creation. Conclusions Most patients who underwent fistula creation before starting dialysis eventually received dialysis with extended follow-up, but the risk was significantly modified by age, sex, and comorbidity. Many patients had fistula creations earlier or later than recommended. PMID:22344512

The Effects of Tulsa's CAP Head Start Program on Middle-School Academic Outcomes and Progress

ERIC Educational Resources Information Center

Phillips, Deborah; Gormley, William; Anderson, Sara

2016-01-01

This study presents evidence pertinent to current debates about the lasting impacts of early childhood educational interventions and, specifically, Head Start. A group of students who were first studied to examine the immediate impacts of the Tulsa, Oklahoma, Community Action Project (CAP) Head Start program were followed-up in middle school,…

The Pace of Vocabulary Growth Helps Predict Later Vocabulary Skill

ERIC Educational Resources Information Center

Rowe, Meredith L.; Raudenbush, Stephen W.; Goldin-Meadow, Susan

2012-01-01

Children vary widely in the rate at which they acquire words--some start slow and speed up, others start fast and continue at a steady pace. Do early developmental variations of this sort help predict vocabulary skill just prior to kindergarten entry? This longitudinal study starts by examining important predictors (socioeconomic status [SES],…

Who Drops out of Early Head Start Home Visiting Programs?

ERIC Educational Resources Information Center

Roggman, Lori A.; Cook, Gina A.; Peterson, Carla A.; Raikes, Helen H.

2008-01-01

Research Findings: Early Head Start home-based programs provide services through weekly home visits to families with children up to age 3, but families vary in how long they remain enrolled. In this study of 564 families in home-based Early Head Start programs, "dropping out" was predicted by specific variations in home visits and certain family…

[Comporison Sduty of Microstructure by Metallographicalk on the Polarized Light and Texture by XRD of CC 5083 and CC 5182 Aluminium Alloy after Cold Rolling and Recrystallization].

PubMed

Chen, Ming-biao; Li, Yong-wei; Tan, Yuan-biao; Ma, Min; Wang, Xue-min; Liu, Wen-chang

2015-03-01

At present the study of relation between microstructure, texture and performance of CC 5083 aluminium alloy after cold tolling and recrystallization processes is still finitude. So that the use of the CC 5083 aluminium alloy be influenced. Be cased into electrical furnace, hot up with unlimited speed followed the furnace hot up to different temperature and annealed 2h respectively, and be cased into salt-beth furnace, hot up quickly to different temperature and annealed 30 min respectively for CC 5083 and CC 5182 aluminum alloy after cold roling with 91.5% reduction. The microstructure be watched use metallographic microscope, the texture be inspected by XRD. The start temperature of recrystallization and grain grow up temperature within annealing in the electric furnace of CC 5083 aluminum alloy board is 343 degrees C, and the shap of grain after grow up with long strip (the innovation point ); The start temperature of recrystallization within annealling in the salt bath furnace of CC 5083 is 343 degrees C. The start temperature and end temperature of recrystallization within annealling of CC 5083 and CC 5182 aluminum alloy is 371 degrees C. The grain grow up outstanding of cold rooled CC 5152 aluminum alloy after annealed with 454 degrees C in the electric furnace and salt bath furnace. The start temperature of grain grow up of CC 5083 alluminurn alloy annealed in the electric furnace and salt bath furnace respectively is higher than the start temperature of grain grow up of CC 5182 alluminum alloy annealed in the electric furnace and salt bath furnace respectively. The strat temperature of recrystallization grain grow up is higher than which annealled with other three manner annealing process. The recrystallization temperature of CC 5182 annealed in the salt bath furnace is higher than which annealed in the electric furnace. The recrystallization temperature of the surface layer of CC 5083 and CC 5182 aluminum alloy is higher than the inner layer (the innovation point). There is a difference each other of the structure and the texture of the four manner annealing aluminum alloy (the innovation point). There is a little difference at the recrystallization processes course reflectived by the observe results of structure transform and by the examination results of texture transmission.

Factors influencing access to education, decision making, and receipt of preferred dialysis modality in unplanned dialysis start patients.

PubMed

Machowska, Anna; Alscher, Mark Dominik; Reddy Vanga, Satyanarayana; Koch, Michael; Aarup, Michael; Qureshi, Abdul Rashid; Lindholm, Bengt; Rutherford, Peter A

2016-01-01

Unplanned dialysis start (UPS) leads to worse clinical outcomes than planned start, and only a minority of patients ever receive education on this topic and are able to make a modality choice, particularly for home dialysis. This study aimed to determine the predictive factors for patients receiving education, making a decision, and receiving their preferred modality choice in UPS patients following a UPS educational program (UPS-EP). The Offering Patients Therapy Options in Unplanned Start (OPTiONS) study examined the impact of the implementation of a specific UPS-EP, including decision support tools and pathway improvement on dialysis modality choice. Linear regression models were used to examine the factors predicting three key steps: referral and receipt of UPS-EP, modality decision making, and actual delivery of preferred modality choice. A simple economic assessment was performed to examine the potential benefit of implementing UPS-EP in terms of dialysis costs. The majority of UPS patients could receive UPS-EP (214/270 patients) and were able to make a decision (177/214), although not all patients received their preferred choice (159/177). Regression analysis demonstrated that the initial dialysis modality was a predictive factor for referral and receipt of UPS-EP and modality decision making. In contrast, age was a predictor for referral and receipt of UPS-EP only, and comorbidity was not a predictor for any step, except for myocardial infarction, which was a weak predictor for lower likelihood of receiving preferred modality. Country practices predicted UPS-EP receipt and decision making. Economic analysis demonstrated the potential benefit of UPS-EP implementation because dialysis modality costs were associated with modality distribution driven by patient preference. Education and decision support can allow UPS patients to understand their options and choose dialysis modality, and attention needs to be focused on ensuring equity of access to educational programs, especially for the elderly. Physician practice and culture across units/countries is an important predictor of UPS patient management and modality choice independent of patient-related factors. Additional work is required to understand and improve patient pathways to ensure that modality preference is enacted. There appears to be a cost benefit of delivering education, supporting choice, and ensuring that the choice is enacted in UPS patients.

Exploration of shoulder load during hand-rim wheelchair start-up with and without power-assisted propulsion in experienced wheelchair users.

PubMed

Kloosterman, Marieke G M; Buurke, Jaap H; Schaake, Leendert; Van der Woude, Lucas H V; Rietman, Johan S

2016-05-01

Frequent start movements occurred during the day, yielding high upper-extremity stress. The high incidence and impact of shoulder injury on daily life wheelchair use made it clinically relevant to investigate whether power-assisted propulsion is beneficial during the start. Eleven hand-rim wheelchair users performed a start-movement in an instrumented wheelchair on a flat surface. Test order was randomly assigned to propulsion with and without power-assist. For each subject, parameters were averaged over 3 repeated starts. For statistical analysis Wilcoxon Signed Rank test was used. Intensity of mechanical shoulder loading decreased during power-assisted propulsion for anterior (147.0 (44.8) versus 121.9 (27.4) N; effect size (r)=-.75), posterior (4.8 (14.1) versus 2.7 (11.6) N; r=-.64) and inferior directed forces (82.6 (27.9) versus 68.9 (22.6) N; r=-.78) and abduction (20.2 (14.6) versus 12.9 (7.8) Nm; r=-.88) and extension moments (20.3 (10.7) versus 13.7 (9.1 Nm; r=-.88). Peak resultant force at the rim significantly decreased from 133.5 (38.4) N to 112.2 (25.4) N (r=-.64) and was accompanied by significant decreased shoulder abduction (35.3 (6.7) versus 33.3 (6.8); r=-.67) and significant increased shoulder extension (13.6 (16.3) versus 20.3 (19.1); r=-.78) during power-assisted start-up. Power-assist hand-rim wheelchairs are effective in reducing external shoulder load and partly effective in reducing force generation in extremes of shoulder motion during start-up. The use of power-assist wheels might reduce the risk of developing shoulder overuse injuries. NTR2661. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Start-up grants for young scientists in German medical universities : Can the clinical scientist be saved?

PubMed

Pabst, R; Linke, P B; Neudeck, N B A; Schmiel, M; Ernst, S B

2016-12-01

German medical faculties currently have severe financial problems. There is the conflict between financing teaching medical students, inpatient and outpatient costs and supporting basic and applied research. Young postdocs can apply for a grant to start research projects to establish techniques on publishing data as a basis for applying for grants from the German Research Foundation or foundations with a critical review system. Successful applicants from the years 1998-2011 were asked to answer a questionnaire. The annual number of applications ranged from 28 to 96 per year. Within the first period of our analysis ranging from 1998 to 2004, a mean number of 69.5 % ± 14.0 % of submitted grant applications were approved annually in comparison to an average approval of 30.9 % ± 11 % in the years 2006-2001. In total 353 projects were funded with a mean amount of money for a project of approximately 18,640 EUR. The mean amount of external grant money following the start-up period was 7.2 times the money initially spent. That is an excellent return of investment. There were no differences between applicants from the department of surgery or department of internal medicine. In the meantime, 56 % of men and 42 % of women have achieved the academic degree university lecturer (privatdozent). Furthermore, 71 % of the participants evaluated this start-up research as supportive for their postdoctoral qualification (habilitation). The program for initial investment for young postdocs by internal start-up grants is overall successful.

Study of plasma start-up initiated by second harmonic electron cyclotron resonance heating on WEGA experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Preynas, M.; Laqua, H. P.; Otte, M.

Although both 1st harmonic ordinary mode (O1) and 2nd harmonic extra-ordinary mode (X2) have been successfully used to initiate pre-ionization and breakdown in many devices, a complete theoretical model is still missing to explain the success of this method. Moreover, some experimental observations are not completely understood, such as what occurs during the delay time between the turn-on of ECRH power and first signals of density or light measurements. Since during this free period the ECRH power has to be absorbed by in-vessel components, it is of prime importance to know what governs this delay time. Recently, dedicated start-up experimentsmore » have been performed on WEGA, using a 28 GHz ECRH system in X2-mode. This machine has the interesting capability to be run also as a tokamak allowing comparative experiments between stellarator (ι/2π > 0) and tokamak (ι/2π = 0) configurations. Different scans in heating power, neutral gas pressure, and rotational transform (ι) show clearly that the start-up is a two step process. A first step following the turn-on of the ECRH power during which no measurable electron density (or just above the noise level in some cases), ECE and radiated power is detected. Its duration depends strongly on the level of injected power. The second step corresponds to the gas ionization and plasma expansion phase, with a velocity of density build-up and filling-up of the vessel volume depending mainly on pressure, gas and rotational transform. Moreover, an interesting scenario of ECRH pre-ionization without loop voltage in tokamak configuration by applying a small optimal vertical field is relevant for start-up assistance on future experiments like ITER. The results from this experimental parametric study are useful for the modeling of the start-up assisted by the second harmonic electron cyclotron resonance heating. The aim of this work is to establish predictive scenarios for both ITER and W7-X operation.« less

ENERGY AND SCIENCE: Five-Year Bibliography 1990-1994

DTIC Science & Technology

1995-12-01

reviews the U.S. government’s efforts to support Venezuela’s energy sector. Sector de Energia en Venezuela: La Prodnccion Petrolera y las Condiciones... renovate existing laboratories or build new ones is often minimal. Four of the eight agencies recently started up task forces to reexamine their research...laboratory repairs. Moreover, funding to renovate existing laboratories or build new ones is often minimal. Four of the eight agencies recently started up

European Conference: "Training for Start-Ups: Existing Programmes and Policies in the Twelve Member States of the EC" (Madrid, Spain, October 24-25, 1991).

ERIC Educational Resources Information Center

Melis, Africa

This document provides a summary of the proceedings of a conference on business start-ups and creation in the 12 member states of the European Community (EC). Section I discusses the current relevance of the issue. Major topics are the explosion of interest in business creation as a means of creating more stable employment and political concern…

Design and start-up of Gary Works' pulverized coal injection facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Donnell, E.M.; Cloran, L.M.; Oshnock, T.W.

1993-07-01

A pulverized coal injection system began operation at the Gary works' blast furnaces on Feb. 1, 1993. This system is capable of processing more than 3500 tons of coal/day to eventually supply the furnaces at a 400 lb/NTHM rate. The start-up was aggressive with coal levels exceeding 200 lb/NTHM within two to five weeks on the furnaces. Current rates are in the 250 to 290 lb/NTHM range.

Method for controlling start-up and steady state performance of a closed split flow recompression brayton cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pasch, James Jay

A method of resolving a balanced condition that generates control parameters for start-up and steady state operating points and various component and cycle performances for a closed split flow recompression cycle system. The method provides for improved control of a Brayton cycle thermal to electrical power conversion system. The method may also be used for system design, operational simulation and/or parameter prediction.

Start Up of a Nb-1%Zr Potassium Heat Pipe From the Frozen State

NASA Technical Reports Server (NTRS)

Glass, David E.; Merrigan, Michael A.; Sena, J. Tom

1998-01-01

The start up of a liquid metal heat pipe from the frozen state was evaluated experimentally with a Nb-1%Zr heat pipe with potassium as the working fluid. The heat pipe was fabricated and tested at Los Alamos National Laboratory. RF induction heating was used to heat 13 cm of the 1-m-long heat pipe. The heat pipe and test conditions are well characterized so that the test data may be used for comparison with numerical analyses. An attempt was made during steady state tests to calibrate the heat input so that the heat input would be known during the transient cases. The heat pipe was heated to 675 C with a throughput of 600 W and an input heat flux of 6 W/cm(exp 2). Steady state tests, start up from the frozen state, and transient variations from steady state were performed.

Life Science Start-up Activities at the Universities of Applied Sciences (UAS).

PubMed

Huber, Gerda

2014-12-01

The universities of applied sciences (UAS) provide several values for the society and economy of a country. Besides education of high level professionals, transfer of knowledge from research to applications in industry or as new start-up companies is an important task. This is done in different ways in the various disciplines. In Life Sciences, a key industry branch in Switzerland, innovation is a competitive success factor and research findings from UAS/Life Sciences contribute to the valorization of new technologies to products, services and to business performance. In order to foster awareness for the innovation need of industry, UAS install processes and support for transfer of research and technology results to marketable applications. Furthermore they may facilitate contacts of researchers and students with entrepreneurs in order to animate start-up founding as a true alternative to being employed. Access to coaching and entrepreneurial training completes the essential basis.

Physicochemical characteristics and microbial community evolution of biofilms during the start-up period in a moving bed biofilm reactor.

PubMed

Zhu, Yan; Zhang, Yan; Ren, Hong-Qiang; Geng, Jin-Ju; Xu, Ke; Huang, Hui; Ding, Li-Li

2015-03-01

This study aimed to investigate biofilm properties evolution coupled with different ages during the start-up period in a moving bed biofilm reactor system. Physicochemical characteristics including adhesion force, extracellular polymeric substances (EPS), morphology as well as volatile solid and microbial community were studied. Results showed that the formation and development of biofilms exhibited four stages, including (I) initial attachment and young biofilm formation, (II) biofilms accumulation, (III) biofilm sloughing and updating, and (IV) biofilm maturation. During the whole start-up period, adhesion force was positively and significantly correlated with the contents of EPS, especially the content of polysaccharide. In addition, increased adhesion force and EPS were beneficial for biofilm retention. Gram-negative bacteria mainly including Sphaerotilus, Zoogloea and Haliscomenobacter were predominant in the initial stage. Actinobacteria was beneficial to resist sloughing. Furthermore, filamentous bacteria were dominant in maturation biofilm. Copyright © 2015 Elsevier Ltd. All rights reserved.

Apple OS X VPN Set Up | High-Performance Computing | NREL

Science.gov Websites

software using that conf file and your UserID Start the connection using your password plus the 6-digit OTP . Configure the Client Software Start the Endian Connect App (It should have installed into Applications in an password" link, and add your UserID. Start the app, and begin configuring the connection by clicking

Getting It Right: Revamping Army Talent Management

DTIC Science & Technology

2015-06-01

starting from foundational up through leadership with the level of difficulty increasing vertically ...............20 Figure 6. In the Nine-box Succession...conflicts has produced an officer population with a wealth of knowledge and experience involving combat, building infrastructure, jump- starting ...rise in importance for internal talent management. Bersin explains that starting in the 1970s, human capital management transitioned from a personnel

Safety for Your Child: 8 Years

MedlinePlus

... bike in when the sun starts to set. Car Safety NEVER start the car until you've checked to be sure that ... sure that you and all others in the car are buckled up, too. Install shoulder belts in ...

The effect of different foot and hand set-up positions on backstroke start performance.

PubMed

de Jesus, Karla; de Jesus, Kelly; Abraldes, J Arturo; Mourão, Luis; Borgonovo-Santos, Márcio; Medeiros, Alexandre I A; Gonçalves, Pedro; Chainok, Phornpot; Fernandes, Ricardo J; Vaz, Mário A P; Vilas-Boas, João Paulo

2016-11-01

Foot and hand set-up position effects were analysed on backstroke start performance. Ten swimmers randomly completed 27 starts grouped in trials (n = 3) of each variation, changing foot (totally immersed, partially and totally emerged) and hand (lowest, highest horizontal and vertical) positioning. Fifteen cameras recorded kinematics, and four force plates collected hands and feet kinetics. Standardised mean difference and 95% confidence intervals were used. Variations with feet immersed have shown lower vertical centre of mass (CM) set-up position (0.16 m), vertical impulse exerted at the hands, horizontal and vertical impulse exerted at the feet (0.28, 0.41, 0.16 N/BW.s, respectively) than feet emerged with hands horizontal and vertically positioned. Most variations with feet partially emerged exhibited higher and lesser vertical impulse exerted at hands than feet immersed and emerged (e.g. vertical handgrip, 0.13, 0.15 N/BW.s, respectively). Variation with feet emerged and hands on the lowest horizontal handgrip depicted shorter horizontal (0.23, 0.26 m) and vertical CM positioning at flight (0.16, 0.15 m) than the highest horizontal and vertical handgrip, respectively. Start variations have not affected 15-m time. Variations with feet partially or totally emerged depicted advantages, but focusing on the entry and underwater biomechanics is relevant for a shorter start time.

High voltage pulse ignition of mercury discharge hollow cathodes

NASA Technical Reports Server (NTRS)

Wintucky, E. G.

1973-01-01

A high voltage pulse generated by a capacitor discharge into a step-up transformer has been demonstrated capable of consistently igniting hollow cathode mercury discharges at propellant flows and heater power levels much below those required by conventional cathode starting. Results are presented for 3.2-mm diameter enclosed and open keeper cathodes. Starting characteristics are shown to depend on keeper voltage, mercury flow rate, heater power, keeper orifice size, emissive materials, and electrode to which the pulse is applied. This starting technique has been used to start a cathode over 10,000 times without any degradation of starting capability.

The start-up of a gas turbine engine using compressed air tangentially fed onto the blades of the basic turbine

NASA Technical Reports Server (NTRS)

Slobodyanyuk, L. K.; Dayneko, V. I.

1983-01-01

The use of compressed air was suggested to increase the reliability and motor lifetime of a gas turbine engine. Experiments were carried out and the results are shown in the form of the variation in circumferential force as a function of the entry angle of the working jet onto the turbine blade. The described start-up method is recommended for use with massive rotors.

A start-up of psychrophilic anaerobic sequence batch reactor digesting a 35 % total solids feed of dairy manure and wheat straw.

PubMed

Saady, Noori M Cata; Massé, Daniel I

2015-12-01

Zero liquid discharge is currently an objective in livestock manure management to minimize water pollution. This paper reports the start-up phase of a novel psychrophilic (20 °C) dry anaerobic digestion of dairy manure with bedding fed at 35 % total solids and an organic loading rate of 3.0 g total chemical oxygen demand kg(-1) inoculum day(-1) in anaerobic sequence batch reactors. The specific methane (CH4) yield ranged from 165.4 ± 9.8 to 213.9 ± 13.6 NL CH4 kg(-1) volatile solids (VS) with an overall average of 188 ± 17 NL CH4 kg(-1) VS during 11 successive start-up cycles (231 days) and a maximum CH4 production rate of 10.2 ± 0.6 NL CH4 kg(-1) VS day(-1). The inoculum-to-substrate (VS-based) ratio ranged from 4.06 to 4.47. Although methanogenesis proceeded fairly well the hydrolysis seemed to be the rate limiting step. It is possible start up psychrophilic dry anaerobic digestion of cow feces and wheat straw at feed TS of 35 % within 7-10 successive cycles (147-210 days).

The effect of shot noise on the start up of the fundamental and harmonics in free-electron lasers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freund, H. P.; Miner, W. H. Jr.; Giannessi, L.

2008-12-15

The problem of radiation start up in free-electron lasers (FELs) is important in the simulation of virtually all FEL configurations including oscillators and amplifiers in both seeded master oscillator power amplifier (MOPA) and self-amplified spontaneous emission (SASE) modes. Both oscillators and SASE FELs start up from spontaneous emission due to shot noise on the electron beam, which arises from the random fluctuations in the phase distribution of the electrons. The injected power in a MOPA is usually large enough to overwhelm the shot noise. However, this noise must be treated correctly in order to model the initial start up ofmore » the harmonics. In this paper, we discuss and compare two different shot noise models that are implemented in both one-dimensional wiggler-averaged (PERSEO) and non-wiggler-averaged (MEDUSA1D) simulation codes, and a three-dimensional non-wiggler-averaged (MEDUSA) formulation. These models are compared for examples describing both SASE and MOPA configurations in one dimension, in steady-state, and time-dependent simulations. Remarkable agreement is found between PERSEO and MEDUSA1D for the evolution of the fundamental and harmonics. In addition, three-dimensional correction factors have been included in the MEDUSA1D and PERSEO, which show reasonable agreement with MEDUSA for a sample MOPA in steady-state and time-dependent simulations.« less

Formation and removal of PCDD/Fs in a municipal waste incinerator during different operating periods.

PubMed

Wang, Hou Chuan; Hwang, Jyh Feng; Chi, Kai Hsien; Chang, Moo Been

2007-04-01

The PCDD/F concentrations and removal efficiencies achieved with air pollution control devices (APCDs) during different operating periods (start-up, normal operation, and shut-down) at an existing municipal waste incinerator (MWI) in Taiwan are evaluated via stack sampling and analysis. The MWI investigated is equipped with electrostatic precipitators (EP), wet scrubbers (WS), and selective catalytic reduction system (SCR) as APCDs. The sampling results indicate that the PCDD/F concentrations at the EP inlet during start-up period were 15 times higher than that measured during normal operation period. The PCDD/F concentration observed at shut-down period was close to that measured at normal operation period. The CO concentration was between 400 and 1000 ppm during start-up period, which was about 50 times higher compared with the normal operation. Hence, combustion condition significantly affected the PCDD/F formation concentration during the waste incineration process. In addition, the distributions of the PCDD/F congeners were similar at different operating periods. During the normal operation and shut-down periods, the EP decreases the PCDD/F concentration (based on TEQ) by 18.4-48.6%, while the removal efficiency of PCDD/Fs achieved with SCR system reaches 99.3-99.6%. Nevertheless, the PCDD/F removal efficiency achieved with SCR was only 42% during the 19-h start-up period due to the low SCR operating temperature (195 degrees C).

Transient Approximation of SAFE-100 Heat Pipe Operation

NASA Technical Reports Server (NTRS)

Bragg-Sitton, Shannon M.; Reid, Robert S.

2005-01-01

Engineers at Los Alamos National Laboratory (LANL) have designed several heat pipe cooled reactor concepts, ranging in power from 15 kWt to 800 kWt, for both surface power systems and nuclear electric propulsion systems. The Safe, Affordable Fission Engine (SAFE) is now being developed in a collaborative effort between LANL and NASA Marshall Space Flight Center (NASA/MSFC). NASA is responsible for fabrication and testing of non-nuclear, electrically heated modules in the Early Flight Fission Test Facility (EFF-TF) at MSFC. In-core heat pipes must be properly thawed as the reactor power starts. Computational models have been developed to assess the expected operation of a specific heat pipe design during start-up, steady state operation, and shutdown. While computationally intensive codes provide complete, detailed analyses of heat pipe thaw, a relatively simple. concise routine can also be applied to approximate the response of a heat pipe to changes in the evaporator heat transfer rate during start-up and power transients (e.g., modification of reactor power level) with reasonably accurate results. This paper describes a simplified model of heat pipe start-up that extends previous work and compares the results to experimental measurements for a SAFE-100 type heat pipe design.

Cold start dynamics and temperature sliding observer design of an automotive SOFC APU

NASA Astrophysics Data System (ADS)

Lin, Po-Hsu; Hong, Che-Wun

This paper presents a dynamic model for studying the cold start dynamics and observer design of an auxiliary power unit (APU) for automotive applications. The APU is embedded with a solid oxide fuel cell (SOFC) stack which is a quiet and pollutant-free electric generator; however, it suffers from slow start problem from ambient conditions. The SOFC APU system equips with an after-burner to accelerate the start-up transient in this research. The combustion chamber burns the residual fuel (and air) left from the SOFC to raise the exhaust temperature to preheat the SOFC stack through an energy recovery unit. Since thermal effect is the dominant factor that influences the SOFC transient and steady performance, a nonlinear real-time sliding observer for stack temperature was implemented into the system dynamics to monitor the temperature variation for future controller design. The simulation results show that a 100 W APU system in this research takes about 2 min (in theory) for start-up without considering the thermal limitation of the cell fracture.

Start up system for hydrogen generator used with an internal combustion engine

NASA Technical Reports Server (NTRS)

Houseman, J.; Cerini, D. J. (Inventor)

1977-01-01

A hydrogen generator provides hydrogen rich product gases which are mixed with the fuel being supplied to an internal combustion engine for the purpose of enabling a very lean mixture of that fuel to be used, whereby nitrous oxides emitted by the engine are minimized. The hydrogen generator contains a catalyst which must be heated to a pre-determined temperature before it can react properly. To simplify the process of heating up the catalyst at start-up time, either some of the energy produced by the engine such as engine exhaust gas, or electrical energy produced by the engine, or the engine exhaust gas may be used to heat up air which is then used to heat the catalyst.

An Evaluation of Fresh Start as a Catch-Up Intervention: A Trial Conducted by Teachers

ERIC Educational Resources Information Center

Gorard, Stephen; Siddiqui, Nadia; See, Beng Huat

2016-01-01

This paper describes a randomised controlled trial conducted with 10 secondary schools in England to evaluate the impact and feasibility of Fresh Start as an intervention to help new entrants with low prior literacy. Fresh Start is a synthetic phonics programme for small groups of pupils, here implemented three times per week over 22 weeks. The…

A Comparison of Written Compositions of Head-Start Pupils with Non-Head-Start Pupils.

ERIC Educational Resources Information Center

Houston, David Ree

This study--a follow-up to one conducted by Giles in 1965-- compared the written compositions of fourth grade pupils who had been in Project Head Start in the summer of 1965 with those of comparable pupils not in the program to determine possible differences in their written language development. Seventy Negro students were divided by sex and…

Study on Operation Optimization of Pumping Station's 24 Hours Operation under Influences of Tides and Peak-Valley Electricity Prices

NASA Astrophysics Data System (ADS)

Yi, Gong; Jilin, Cheng; Lihua, Zhang; Rentian, Zhang

2010-06-01

According to different processes of tides and peak-valley electricity prices, this paper determines the optimal start up time in pumping station's 24 hours operation between the rating state and adjusting blade angle state respectively based on the optimization objective function and optimization model for single-unit pump's 24 hours operation taking JiangDu No.4 Pumping Station for example. In the meantime, this paper proposes the following regularities between optimal start up time of pumping station and the process of tides and peak-valley electricity prices each day within a month: (1) In the rating and adjusting blade angle state, the optimal start up time in pumping station's 24 hours operation which depends on the tide generation at the same day varies with the process of tides. There are mainly two kinds of optimal start up time which include the time at tide generation and 12 hours after it. (2) In the rating state, the optimal start up time on each day in a month exhibits a rule of symmetry from 29 to 28 of next month in the lunar calendar. The time of tide generation usually exists in the period of peak electricity price or the valley one. The higher electricity price corresponds to the higher minimum cost of water pumping at unit, which means that the minimum cost of water pumping at unit depends on the peak-valley electricity price at the time of tide generation on the same day. (3) In the adjusting blade angle state, the minimum cost of water pumping at unit in pumping station's 24 hour operation depends on the process of peak-valley electricity prices. And in the adjusting blade angle state, 4.85%˜5.37% of the minimum cost of water pumping at unit will be saved than that of in the rating state.

Plasma current start-up experiments without the central solenoid in the TST-2 spherical tokamak

NASA Astrophysics Data System (ADS)

Takase, Y.; Ejiri, A.; Shiraiwa, S.; Adachi, Y.; Ishii, N.; Kasahara, H.; Nuga, H.; Ono, Y.; Oosako, T.; Sasaki, M.; Shimada, Y.; Sumitomo, N.; Taguchi, I.; Tojo, H.; Tsujimura, J.; Ushigome, M.; Yamada, T.; Hanada, K.; Hasegawa, M.; Idei, H.; Nakamura, K.; Sakamoto, M.; Sasaki, K.; Sato, K. N.; Zushi, H.; Nishino, N.; Mitarai, O.

2006-08-01

Several techniques for initiating the plasma current without the use of the central solenoid are being developed in TST-2. While TST-2 was temporarily located at Kyushu University, two types of start-up scenarios were demonstrated. (1) A plasma current of 4 kA was generated and sustained for 0.28 s by either electron cyclotron wave or electron Bernstein wave, without induction. (2) A plasma current of 10 kA was obtained transiently by induction using only outboard poloidal field coils. In the second scenario, it is important to supply sufficient power for ionization (100 kW of EC power was sufficient in this case), since the vertical field during start-up is not adequate to maintain plasma equilibrium. In addition, electron heating experiments using the X-B mode conversion scenario were performed, and a heating efficiency of 60% was observed at a 100 kW RF power level. TST-2 is now located at the Kashiwa Campus of the University of Tokyo. Significant upgrades were made in both magnetic coil power supplies and RF systems, and plasma experiments have restarted. RF power of up to 400 kW is available in the high-harmonic fast wave frequency range around 20 MHz. Four 200 MHz transmitters are now being prepared for plasma current start-up experiments using RF power in the lower-hybrid frequency range. Preparations are in progress for a new plasma merging experiment (UTST) aimed at the formation and sustainment of ultra-high β ST plasmas.

Treatment initiation, program attrition and patient treatment outcomes associated with scale-up and decentralization of HIV care in rural Malawi.

PubMed

McGuire, Megan; Pinoges, Loretxu; Kanapathipillai, Rupa; Munyenyembe, Tamika; Huckabee, Martha; Makombe, Simon; Szumilin, Elisabeth; Heinzelmann, Annette; Pujades-Rodríguez, Mar

2012-01-01

To describe patient antiretroviral therapy (cART) outcomes associated with intensive decentralization of services in a rural HIV program in Malawi. Longitudinal analysis of data from HIV-infected patients starting cART between August 2001 and December 2008 and of a cross-sectional immunovirological assessment conducted 12 (±2) months after therapy start. One-year mortality, lost to follow-up, and attrition (deaths and lost to follow-up) rates were estimated with exact Poisson 95% confidence intervals (CI) by type of care delivery and year of initiation. Association of virological suppression (<50 copies/mL) and immunological success (CD4 gain ≥100 cells/µL), with type of care was investigated using multiple logistic regression. During the study period, 4322 cART patients received centralized care and 11,090 decentralized care. At therapy start, patients treated in decentralized health facilities had higher median CD4 count levels (167 vs. 130 cell/µL, P<0.0001) than other patients. Two years after cART start, program attrition was lower in decentralized than centralized facilities (9.9 per 100 person-years, 95% CI: 9.5-10.4 vs. 20.8 per 100 person-years, 95% CI: 19.7-22.0). One year after treatment start, differences in immunological success (adjusted OR=1.23, 95% CI: 0.83-1.83), and viral suppression (adjusted OR=0.80, 95% CI: 0.56-1.14) between patients followed at centralized and decentralized facilities were not statistically significant. In rural Malawi, 1- and 2-year program attrition was lower in decentralized than in centralized health facilities and no statistically significant differences in one-year immunovirological outcomes were observed between the two health care levels. Longer follow-up is needed to confirm these results.

Landing Gear/Soil Interaction Development of Criteria for Aircraft Operation on Soil During Turning and Multipass Operations

DTIC Science & Technology

1975-10-01

AFFDL-TR-75-78 LANDING GEAR/ SOIL INTERACTION DEVELOPMENT OF CRITERIA FOR AIRCRAFT "OPERATION ON SOIL DURING TURNING #"q AND MULTIPASS OPERATIONS cc...braking. Limited start-up force data were examined to determine a preliminary estimate of start-up drag ratios. A soft tire/ soil computer program was...distance, landing rollout, turning perfor nance, and number of allowable passes for a particular vehicle and select soil . .. 4 UNCLASSIFIED -i SECURITY

Electron Injection by E-Field Drift and its Application in Starting-up Tokamaks at Low Loop Voltage

NASA Astrophysics Data System (ADS)

Pan, Yuan; Yan, Xiao-Lin; Liu, Bao-Hua

2003-05-01

We propose an innovative method of electron injection by E-field drift into a plasma device and discuss its application in starting-up tokamak plasmas at low loop voltage. The experimental results obtained from HT-6M Tokamak are also presented. The breakdown loop voltage is obviously reduced and the discharge performance is improved by using the electron injection method. It could be applied to some other types of plasma device.

Under scrutiny. As public anxiety grows over health care horror stories, consumers are starting to fight back. Guess who's winning.

PubMed

Bilchik, G S

1996-05-05

"We're getting dozens of calls every day from people who are frustrated and fed up," says one health care consumer rights advocate. The scenario is familiar: first come the horror stories, then trailblazing, media-engaging lawsuits, and finally the public learning curve starts to accelerate. Then the heat gets turned up on the government to act. That's where we're at right now. Where will we be tomorrow?

High voltage pulse ignition of mercury discharge hollow cathodes

NASA Technical Reports Server (NTRS)

Wintucky, E. G.

1973-01-01

A high voltage pulse generated by a capacitor discharge into a step-up transformer has been demonstrated capable of consistently igniting hollow cathode mercury discharges at propellant flows and heater power levels much below those required by conventional cathode starting. Results are presented for 3.2-mm diameter enclosed and open keeper cathodes. Starting characteristics are shown to depend on keeper voltage, mercury flow rate, heater power, keeper orifice size, emissive materials, and electrode to which the pulse is applied. This starting technique has been used to start a cathode over 10,000 times without any degradation of starting capability. The starting reliability, propellant and power savings offered by the high voltage pulse start should favorably impact performance of electron bombardment thrusters in missions requiring many on-off duty cycles.

Experimental and analytical study of stability characteristics of natural circulation boiling water reactors during startup transient

NASA Astrophysics Data System (ADS)

Woo, Kyoungsuk

Two-phase natural circulation loops are unstable at low pressure operating conditions. New reactor design relying on natural circulation for both normal and abnormal core cooling is susceptible to different types of flow instabilities. In contrast to forced circulation boiling water reactor (BWR), natural circulation BWR is started up without recirculation pumps. The tall chimney placed on the top of the core makes the system susceptible to flashing during low pressure start-up. In addition, the considerable saturation temperature variation may induce complicated dynamic behavior driven by thermal non-equilibrium between the liquid and steam. The thermal-hydraulic problems in two-phase natural circulation systems at low pressure and low power conditions are investigated through experimental methods. Fuel heat conduction, neutron kinetics, flow kinematics, energetics and dynamics that govern the flow behavior at low pressure, are formulated. A dimensionless analysis is introduced to obtain governing dimensionless groups which are groundwork of the system scaling. Based on the robust scaling method and start-up procedures of a typical natural circulation BWR, the simulation strategies for the transient with and without void reactivity feedback is developed. Three different heat-up rates are applied to the transient simulations to study characteristics of the stability during the start-up. Reducing heat-up rate leads to increase in the period of flashing-induced density wave oscillation and decrease in the system pressurization rate. However, reducing the heat-up rate is unable to completely prevent flashing-induced oscillations. Five characteristic regions of stability are discovered at low pressure conditions. They are stable single-phase, flashing near the separator, intermittent oscillation, sinusoidal oscillation and low subcooling stable regions. Stability maps were acquired for system pressures ranging 100 kPa to 400 kPa. According to experimental investigation, the flow becomes stable below a certain heat flux regardless of the inlet subcooling at the core and system pressure. At higher heat flux, unstable phenomena were indentified within a certain range of inlet subcooling. The unstable region diminishes as the system pressure increases. In natural circulation BWRs, the significant gravitational pressure drop over the tall chimney section induces a Type-I instability. The Type-I instability becomes especially important during low power and pressure conditions during reactor start-up. Under these circumstances the effect of pressure variations on the saturation enthalpy becomes significant. An experimental study shows that the flashing phenomenon in the adiabatic chimney section is dominant during the start-up of a natural circulation BWR. Since flashing occurs outside the core, nuclear feedback effects on the stability are small. Furthermore, the thermal-hydraulic oscillation period is much longer than power fluctuation period caused by void reactivity feedback. In the natural circulation system increasing the inlet restriction reduces the natural circulation flow rate, shifting the unstable region to higher inlet subcooling.

Development of surface coatings for air-lubricated, compliant journal bearings to 650 C

NASA Technical Reports Server (NTRS)

Bhushan, B.; Gray, S.

1978-01-01

Surface coatings for an air-lubricated, compliant journal for an automotive gas turbine engine were tested to find those capable of withstanding temperatures of either 540 C (1000 F) or 650 C (1200 F). Also, the coatings have to be capable of surviving the start-stop sliding contact cycles prior to rotor lift-off and at touchdown. Selected coating combinations were tested in start-stop tests at 14 kPa (2 psi) loading for 2000 cycles at room and maximum temperatures. Specific coating recommendations are: Cdo and graphite on foil versus chrome carbide on journal up to 370 C (700 F); NASA PS-120 (Tribaloy 400, silver, and CaF2) on journal versus uncoated foil up to 540 C (1000 F); and chemically adherent Cr2O3 on journal and foil up to 650 C (1200 F). The chemically adherent Cr2O3 coating system was further tested successfully at 35 kPa (5 psi) loading for 2000 start-stop cycles.

[Outsourcing in long-term care: a risk management approach].

PubMed

Guimarães, Cristina Machado; Carvalho, José Crespo de

2012-05-01

This article seeks to investigate outsourcing decisions in supply chain management of healthcare organizations, namely the motives and constraints behind the decision, the selection criteria for activities to be outsourced to third parties, the type of possible agreements, and the impact of this decision on the organization per se. A case study of the start-up phase of a Long-term Care unit with an innovative approach and high levels of customization was conducted to understand the outsourcing process in a start-up context (not in the standard context of organizational change) and a risk evaluation matrix was created for outsourcing activities in order to define and implement a performance monitoring process. This study seeks to understand how to evaluate and assess the risks of an outsourcing strategy and proposes a monitoring model using risk management tools. It was shown that the risk management approach can be a solution for monitoring outsourcing in the organizational start-up phase. Conclusions concerning dissatisfaction with the results of outsourcing strategies adopted are also presented.

[Quick Start-up and Sustaining of Shortcut Nitrification in Continuous Flow Reactor].

PubMed

Wu, Peng; Zhang Shi-ying; Song, Yin-ling; Xu, Yue-zhong; Shen, Yao-liang

2016-04-15

How to achieve fast and stable startup of shortcut nitrification has a very important practical value for treatment of low C/N ratio wastewater. Thus, the quick start-up and sustaining of shortcut nitrification were investigated in continuous flow reactor targeting at the current situation of urban wastewater treatment plant using a continuous flow process. The results showed that quick start-up of shortcut nitrification could be successfully achieved in a continuous flow reactor after 60 days' operation with intermittent aeration and controlling of three stages of stop/aeration time (15 min/45 min, 45 min/45 min and 30 min/30 min). The nitrification rates could reach 90% or 95% respectively, while influent ammonia concentrations were 50 or 100 mg · L⁻¹ with stop/aeration time of 30 min/30 min. In addition, intermittent aeration could inhibit the activity of nitrite oxidizing bacteria (NOB), while short hydraulic retention time (HRT) may wash out NOB. And a combined use of both measures was beneficial to sustain shortcut nitrification.

Speech, language, and cognitive dysfunction in children with focal epileptiform activity: A follow-up study.

PubMed

Rejnö-Habte Selassie, Gunilla; Hedström, Anders; Viggedal, Gerd; Jennische, Margareta; Kyllerman, Mårten

2010-07-01

We reviewed the medical history, EEG recordings, and developmental milestones of 19 children with speech and language dysfunction and focal epileptiform activity. Speech, language, and neuropsychological assessments and EEG recordings were performed at follow-up, and prognostic indicators were analyzed. Three patterns of language development were observed: late start and slow development, late start and deterioration/regression, and normal start and later regression/deterioration. No differences in test results among these groups were seen, indicating a spectrum of related conditions including Landau-Kleffner syndrome and epileptic language disorder. More than half of the participants had speech and language dysfunction at follow-up. IQ levels, working memory, and processing speed were also affected. Dysfunction of auditory perception in noise was found in more than half of the participants, and dysfunction of auditory attention in all. Dysfunction of communication, oral motor ability, and stuttering were noted in a few. Family history of seizures and abundant epileptiform activity indicated a worse prognosis. Copyright 2010 Elsevier Inc. All rights reserved.

Start-up Characteristics of Swallow-tailed Axial-grooved Heat Pipe under the conditions of Multiple Heat Sources

NASA Astrophysics Data System (ADS)

Zhang, Renping

2017-12-01

A mathematical model was developed for predicting start-up characteristics of Swallow-tailed Axial-grooved Heat Pipe under the conditions of Multiple Heat Sources. The effects of heat capacitance of heat source, liquid-vapour interfacial evaporation-condensation heat transfer, shear stress at the interface was considered in current model. The interfacial evaporating mass flow rate is based on the kinetic analysis. Time variations of evaporating mass rate, wall temperature and liquid velocity are studied from the start-up to steady state. The calculated results show that wall temperature demonstrates step transition at the junction between the heat source and non-existent heat source on the evaporator. The liquid velocity changes drastically at the evaporator section, however, it has slight variation at the evaporator section without heat source. When the effect of heat source is ignored, the numerical temperature demonstrates a quicker response. With the consideration of capacitance of the heat source, the data obtained from the proposed model agree well with the experimental results.

Characteristics of sludge developed under different loading conditions during UASB reactor start-up and granulation.

PubMed

Ghangrekar, M M; Asolekar, S R; Joshi, S G

2005-03-01

Sludge characteristics available inside the reactor are of vital importance to maximize advantages of UASB reactor. The organic loading rate and sludge loading rate applied during start-up are among the important parameters to govern the sludge characteristics. Effects of these loading rates on the characteristics of the sludge developed are evaluated in six laboratory scale UASB reactors. The sludge characteristics considered are VSS/SS ratio of the sludge, sludge volume index, specific gravity, settling velocity and metal contents of the sludge developed under different loading rates. The experimental results indicate that, for developing good characteristics sludge, during primary start-up from flocculent inoculum sludge, organic loading rate and sludge loading rate should be in the range of 2.0-4.5 kg COD/m3 d and 0.1-0.25 kg COD/kg VSS d, respectively (chemical oxygen demand, COD). Proper sludge granulation and higher COD removal efficiency will be achieved by these loading rates.

Analysis of key microbial community during the start-up of anaerobic ammonium oxidation process with paddy soil as inoculated sludge.

PubMed

Xu, Xianglong; Liu, Guohua; Wang, Yuanyuan; Zhang, Yuankai; Wang, Hao; Qi, Lu; Wang, Hongchen

2018-02-01

A sequencing batch reactor (SBR)-anaerobic ammonium oxidation (anammox) system was started up with the paddy soil as inoculated sludge. The key microbial community structure in the system along with the enrichment time was investigated by using molecular biology methods (e.g., high-throughput 16S rRNA gene sequencing and quantitative PCR). Meanwhile, the influent and effluent water quality was continuously monitored during the whole start-up stage. The results showed that the microbial diversity decreased as the operation time initially and increased afterwards, and the microbial niches in the system were redistributed. The anammox bacterial community structure in the SBR-anammox system shifted during the enrichment, the most dominant anammox bacteria were CandidatusJettenia. The maximum biomass of anammox bacteria achieved 1.68×10 9 copies/g dry sludge during the enrichment period, and the highest removal rate of TN achieved around 75%. Copyright © 2017. Published by Elsevier B.V.

Solid oxide fuel cell power plant having a bootstrap start-up system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lines, Michael T

The bootstrap start-up system (42) achieves an efficient start-up of the power plant (10) that minimizes formation of soot within a reformed hydrogen rich fuel. A burner (48) receives un-reformed fuel directly from the fuel supply (30) and combusts the fuel to heat cathode air which then heats an electrolyte (24) within the fuel cell (12). A dilute hydrogen forming gas (68) cycles through a sealed heat-cycling loop (66) to transfer heat and generated steam from an anode side (32) of the electrolyte (24) through fuel processing system (36) components (38, 40) and back to an anode flow field (26)more » until fuel processing system components (38, 40) achieve predetermined optimal temperatures and steam content. Then, the heat-cycling loop (66) is unsealed and the un-reformed fuel is admitted into the fuel processing system (36) and anode flow (26) field to commence ordinary operation of the power plant (10).« less

Biofilm development during the start-up period of anaerobic biofilm reactors: the biofilm Archaea community is highly dependent on the support material

PubMed Central

Habouzit, Frédéric; Hamelin, Jérôme; Santa-Catalina, Gaëlle; Steyer, Jean-P; Bernet, Nicolas

2014-01-01

To evaluate the impact of the nature of the support material on its colonization by a methanogenic consortium, four substrata made of different materials: polyvinyl chloride, 2 polyethylene and polypropylene were tested during the start-up of lab-scale fixed-film reactors. The reactor performances were evaluated and compared together with the analysis of the biofilms. Biofilm growth was quantified and the structure of bacterial and archaeal communities were characterized by molecular fingerprinting profiles (capillary electrophoresis-single strand conformation polymorphism). The composition of the inoculum was shown to have a major impact on the bacterial composition of the biofilm, whatever the nature of the support material or the organic loading rate applied to the reactors during the start-up period. In contrast, the biofilm archaeal populations were independent of the inoculum used but highly dependent on the support material. Supports favouring Archaea colonization, the limiting factor in the overall process, should be preferred. PMID:24612643

Efforts to control radiation build-up in Ringhals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Egner, K.; Aronsson, P.O.; Erixon, O.

1995-03-01

It is well known that good control of the primary chemistry in a PWR is essential in order to minimize material problems and fuel damages. It has also been well established that the water chemistry has a great influence on accumulation of corrosion products on the fuel and the radiation build-up on primary system surfaces. Ringhals was one of the pioneers to increase operating pH in order to reduce radiation build-up and has now been operating for ten years with pH at 7.4 or (in later years) 7.2. Our experience is favourable and includes low radiation levels in the newmore » (1989) steam generators of Ringhals 2. Ringhals 4 has operated almost its whole life at pH 7.2 or higher and it remains one of the cleanest PWRs of its vintage. In addition to strict adherence to a stable operating chemistry, Ringhals is now working on a program with the aim to find optimum shut-down and start-up chemistry to reduce activity levels in the primary systems. A particular goal is to use the shut-down and start-up chemistry at the 1994 outage in Ringhals 3 in order to reduce doserates in preparation for the planned steam generator replacement in 1995. The paper summarizes the experience to date of the established operating chemistry, on-going tests with modified shut-down and start-up chemistry and other measures to limit or reduce the activity build-up.« less

Longitudinal Outcomes of Start Time Delay on Sleep, Behavior, and Achievement in High School.

PubMed

Thacher, Pamela V; Onyper, Serge V

2016-02-01

To establish whether sleep, health, mood, behavior, and academics improved after a 45-minute delay in high school start time, and whether changes persisted longitudinally. We collected data from school records and student self-report across a number of domains at baseline (May 2012) and at two follow-up time points (November 2012 and May 2013), at a public high school in upstate New York. Students enrolled during academic years (AY) 2011-2012 and 2012-2013 completed the Pittsburgh Sleep Quality Index; the DASS-21; the "Owl-Lark" Scale; the Daytime Sleepiness Index; and a brief self-report of health. Reports from school records regarding attendance, tardiness, disciplinary violations, and academic performance were collected for AY 2010-2011 through 2013-2014. Students delayed but did not extend their sleep period; we found lasting improvements in tardiness and disciplinary violations after the start-time delay, but no changes to other variables. At the first follow-up, students reported 20 minutes longer sleep, driven by later rise times and stable bed times. At the second follow-up, students maintained later rise times but delayed bedtimes, returning total sleep to baseline levels. A delay in rise time, paralleling the delay in the start time that occurred, resulted in less tardiness and decreased disciplinary incidents, but larger improvements to sleep patterns may be necessary to affect health, attendance, sleepiness, and academic performance. Later start times improved tardiness and disciplinary issues at this school district. A delay in start time may be a necessary but not sufficient means to increase sleep time and may depend on preexisting individual differences. A commentary on this article appears in this issue on page 267. © 2016 Associated Professional Sleep Societies, LLC.

Comparative study on power generation of dual-cathode microbial fuel cell according to polarization methods.

PubMed

Lee, Kang-yu; Ryu, Wyan-seuk; Cho, Sung-il; Lim, Kyeong-ho

2015-11-01

Microbial fuel cells (MFCs) exist in various forms depending on the type of pollutant to be removed and the expected performance. Dual-cathode MFCs, with their simple structure, are capable of removing both organic matter and nitrogen. Moreover, various methods are available for the collection of polarization data, which can be used to calculate the maximum power density, an important factor of MFCs. Many researchers prefer the method of varying the external resistance in a single-cycle due to the short measurement time and high accuracy. This study compared power densities of dual-cathode MFCs in a single-cycle with values calculated over multi-cycles to determine the optimal polarization method. External resistance was varied from high to low and vice versa in the single-cycle, to calculate power density. External resistance was organized in descending order with initial start-up at open circuit voltage (OCV), and then it was organized in descending order again after the initial start-up at 1000 Ω. As a result, power density was underestimated at the anoxic cathode when the external resistance was varied from low to high, and overestimated at the aerobic cathode and anoxic cathode when external resistance at OCV was reduced following initial start-up. In calculating the power densities of dual-cathode MFCs, this paper recommends the method of gradually reducing the external resistance after initial start-up with high external resistance. Copyright © 2015 Elsevier Ltd. All rights reserved.

Longitudinal Outcomes of Start Time Delay on Sleep, Behavior, and Achievement in High School

PubMed Central

Thacher, Pamela V.; Onyper, Serge V.

2016-01-01

Study Objectives: To establish whether sleep, health, mood, behavior, and academics improved after a 45-minute delay in high school start time, and whether changes persisted longitudinally. Methods: We collected data from school records and student self-report across a number of domains at baseline (May 2012) and at two follow-up time points (November 2012 and May 2013), at a public high school in upstate New York. Students enrolled during academic years (AY) 2011–2012 and 2012–2013 completed the Pittsburgh Sleep Quality Index; the DASS-21; the “Owl-Lark” Scale; the Daytime Sleepiness Index; and a brief self-report of health. Reports from school records regarding attendance, tardiness, disciplinary violations, and academic performance were collected for AY 2010–2011 through 2013–2014. Results: Students delayed but did not extend their sleep period; we found lasting improvements in tardiness and disciplinary violations after the start-time delay, but no changes to other variables. At the first follow-up, students reported 20 minutes longer sleep, driven by later rise times and stable bed times. At the second follow-up, students maintained later rise times but delayed bedtimes, returning total sleep to baseline levels. A delay in rise time, paralleling the delay in the start time that occurred, resulted in less tardiness and decreased disciplinary incidents, but larger improvements to sleep patterns may be necessary to affect health, attendance, sleepiness, and academic performance. Conclusions: Later start times improved tardiness and disciplinary issues at this school district. A delay in start time may be a necessary but not sufficient means to increase sleep time and may depend on preexisting individual differences. Commentary: A commentary on this article appears in this issue on page 267. Citation: Thacher PV, Onyper SV. Longitudinal outcomes of start time delay on sleep, behavior, and achievement in high school. SLEEP 2016;39(2):271–281. PMID:26446106

Optimizing Creativity

ERIC Educational Resources Information Center

Sisk, Dorothy A.

2014-01-01

Transforming education or business starts with transforming one's mind, and that inner transformation starts with opening up to--indeed welcoming--the inevitable bursts of creativity available to everyone. Sidney J Parnes, one of the world's leading experts on creative problem-solving (CPSI), innovation and creativity, said, "I dream a dream,…

On-board generation of a highly volatile starting fuel to reduce automobile cold-start emissions.

PubMed

Ashford, Marcus D; Matthews, Ronald D

2006-09-15

The on-board distillation system (OBDS) was developed to extract, from gasoline, a high-volatility fuel for exclusive use during the starting and warm-up periods. The use of OBDS distillate fuel results in much improved mixture preparation, allowing combinations of air/fuel ratio and ignition timing that are not possible with gasoline, even with a fully warm engine. The volatility of the distillate is a function of the parent fuel volatility; however, the variability in distillate quality can be diminished via manipulation of the OBDS operating conditions. Thus, it is possible to develop aggressive starting calibrations that are relatively immune to variations in pump gasoline volatility. The key benefits provided bythe OBDS fuel relative to standard gasoline were found to be (1) improved mixture preparation allowing a 70% reduction of cranking fuel requirements, elimination of air-fuel mixture enrichment during the warm-up period, and significant extension of warm-up ignition timing retard; (2) a 57% decrease in catalyst light-off time, (3) emissions reductions over the FTP drive cycle of 81% for regulated hydrocarbons (NMOG); (4) emissions index (NMOG) approaching that of SULEV/PZEV vehicles; and (5) an apparent 1% increase in fuel economy over the FTP drive cycle.

Testing of a Loop Heat Pipe Subjective to Variable Accelerations. Part 1; Start-up

NASA Technical Reports Server (NTRS)

Ku, Jentung; Rogers, Paul; Hoff, Craig

2000-01-01

The effect of accelerating forces on the performance of loop heat pipes (LHP) is of interest and importance to terrestrial and space applications. They are being considered for cooling of military combat vehicles and for spinning spacecraft. In order to investigate the effect of an accelerating force on LHP operation, a miniature LHP was installed on a spin table. Variable accelerating forces were imposed on the LHP by spinning the table at different angular speeds. Several patterns of accelerating forces were applied, i.e. continuous spin at different speeds and periodic spin at different speeds and frequencies. The resulting accelerations ranged from 1.17 g's to 4.7 g's. This paper presents the first part of the experimental study, i.e. the effects of a centrifugal force on the LHP start-up. Tests were conducted by varying the heat load to the evaporator, sink temperature, magnitude and frequency of centrifugal force, and LHP orientation relative to the direction of the accelerating force. The accelerating force seems to have little effect on the loop start-up in terms of temperature overshoot and superheat at boiling incipience. Changes in these parameters seem to be stochastic with or without centrifugal accelerating forces. The LHP started successfully in all tests.

Numerical modeling of lower hybrid current drive in fully non-inductive plasma start-up experiments on TST-2

NASA Astrophysics Data System (ADS)

Tsujii, N.; Takase, Y.; Ejiri, A.; Shinya, T.; Togashi, H.; Yajima, S.; Yamazaki, H.; Moeller, C. P.; Roidl, B.; Sonehara, M.; Takahashi, W.; Toida, K.; Yoshida, Y.

2017-12-01

Non-inductive plasma start-up is a critical issue for spherical tokamaks since there is not enough room to provide neutron shielding for the center solenoid. Start-up using lower hybrid (LH) waves has been studied on the TST-2 spherical tokamak. Because of the low magnetic field of a spherical tokamak, the plasma density needs to be kept at a very low value during the plasma current ramp-up so that the plasma core remains accessible to the LH waves. However, we have found that higher density was required to sustain larger plasma current. The achievable plasma current was limited by the maximum operational toroidal field of TST-2. The existence of an optimum density for LH current drive and its toroidal field dependence is explained through a numerical simulation based on a ray tracing code and a Fokker-Planck solver. In order to access higher density at the same magnetic field, a top-launch antenna was recently installed in addition to the existing outboard-launch antenna. Increase in the density limit was observed when the power was launched from the top antenna, consistently with the numerical predictions.

Investigation report: H Reactor mischarging incident

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vinther, A.P.

1964-05-01

All cold reactor start-up procedures require the vertical safety rods (VSR) to be withdrawn in pairs with specific waiting periods between each pair withdrawal. This rod withdrawal procedure will assure an early and safe detection of reactor criticality should reactor reactivity conditions be different than predicted so that proper corrective actions can be taken. During the paired VSR removal of H reactor on April 17, 1964, while preparing for reactor start-up, an extremely low level rising period was detected with six VSR's still in the reactor. The withdrawn VSR's were promptly re-inserted. During the next several days other process difficultiesmore » were encountered. H Processing personnel began investigating the possibility that a number of process tubes might have been mischarged; one shift's charging effort appeared to be suspect as longitudinal peaking appeared nearly twice as severe as normal in the distorted region. Following verification of a charging error in the suspect group of 171 tubes, that group of tubes was discharged and recharged with the proper charge make-up. On April 24, during VSR removal for start-up, low level criticality was detected with three VSR's still in the unit. The VSR's were re-inserted and Operational Physics analysis requested. Following installation of additional poisoning, the Operational Physics analysis uncovered a reactivity prediction error related to the prior operation with the skewed flux distribution. However, in this case, as on April 17, the procedural paired VSR withdrawal provided safe detection of the criticality condition in adequate time to take prompt corrective action. A successful reactor start-up was then achieved later on April 24, and reactor operation has been normal since that time. 4 figs.« less

Good maintenance of exercise-induced bone gain with decreased training of female tennis and squash players: a prospective 5-year follow-up study of young and old starters and controls.

PubMed

Kontulainen, S; Kannus, P; Haapasalo, H; Sievänen, H; Pasanen, M; Heinonen, A; Oja, P; Vuori, I

2001-02-01

This prospective 5-year follow-up study of 64 adult female racquet sports players and 27 controls assessed the changes in the playing-to-nonplaying arm bone mineral content (BMC) differences to answer three questions: (1) Are training-induced bone gains lost with decreased training? (2) Is the bone response to decreased training different if the playing career has been started before or at puberty rather than after it? (3) Are the possible bone changes related to the changes in training? The players were divided into two groups according to the starting age of their tennis or squash playing. The mean starting age was 10.5 years (SD, 2.2) among the players who had started training before or at menarche (young starters; n = 36) while 26.4 years (SD, 8.0) among those players who had begun training a minimum of 1 year after menarche (old starters; n = 28). At baseline of the 5-year follow-up, the mean age of the young starters was 21.6 years (SD, 7.6) and that of old starters was 39.4 years (SD, 10.5). During the follow-up, the young starters had reduced the average training frequency from 4.7 times a week (2.7) to 1.4 times a week (1.3) and the old starters from 4.0 times a week (1.4) to 2.0 times a week (1.4), respectively. The 5-year follow-up revealed that despite reduced training the exercise-induced bone gain was well maintained in both groups of players regardless of their clearly different starting age of activity and different amount of exercise-induced bone gain. The gain was still 1.3-2.2 times greater in favor of the young starters (at the follow-up, the dominant-to-nondominant arm BMC difference was 22% [8.4] in the humeral shaft of the young starters versus 10% [3.8] in the old starters, and 3.5% [2.4] in controls). In the players, changes in training were only weakly related to changes in the side-to-side BMC difference (r(s) = 0.05-0.34, all NS), and this was true even among the players who had stopped training completely a minimum 1 year before the follow-up. In conclusion, if controlled interventions will confirm our findings that an exercise-induced bone gain can be well maintained with decreased activity and that the maintenance of the bone gain is independent of the starting age of activity, exercise can be recommended for preventing osteoporosis and related fractures.

Strategy and Grand Strategy: What Students and Practitioners Need to Know

DTIC Science & Technology

2015-12-01

available, acceptable, and well-suited to the purpose for which they will be used. These questions, though crucial, are only a starting place... starting point (rarely an ideal one) and then constantly reassessing the situation in light of changing conditions. This requires an ongoing...him.87 In the end, Britain and France reluctantly decided that they had to stand up to Hitler’s challenge to the international system. At the start

Native American Entrepreneurship. Digest.

ERIC Educational Resources Information Center

Seymour, Nicole

Although Native Americans have owned and started the fewest small businesses of all U.S. minority groups, entrepreneurship is considered to be an efficient tool for alleviating their economic problems. Barriers to Native American entrepreneurship include poverty, scarce start-up capital, poor access to business education and technical assistance,…

How Much Weight to Use During Strength Training Activities

Cancer.gov

Many women want to start a strength training routine but aren’t sure how much weight to use. Start with resistance bands, soup cans, or light weights (1 to 3 pounds) and build up to tighter bands or heavier weights as you feel and become stronger.

A 12 mV start-up converter using piezoelectric transformer for energy harvesting applications

NASA Astrophysics Data System (ADS)

Martinez, T.; Pillonnet, G.; Costa, F.

2016-11-01

This paper presents a novel topology of start-up converter for sub 100 mV thermal energy harvesting based on an Armstrong oscillator topology using a piezoelectric transformer (PT) and a normally-on MOSFET. Based on a Rosen-type PT and off-the-shelf components, the proposed startup topology begins to oscillate at 12 mV input voltage corresponding to a temperature gradient of 2°C and achieves 1 V output voltage with only 18 mV input voltage applied to the harvester.

Enceladus: Starting Hydrothermal Activity

NASA Technical Reports Server (NTRS)

Matson, D. L.; Castillo-Rogez, J. C.; Johnson, T. V.; Lunine, J. I.; Davies, A. G.

2011-01-01

We describe a process for starting the hydrothermal activity in Enceladus' South Polar Region. The process takes advantage of fissures that reach the water table, about 1 kilometer below the surface. Filling these fissures with fresh ocean water initiates a flow of water up from an ocean that can be self-sustaining. In this hypothesis the heat to sustain the thermal anomalies and the plumes comes from a slightly warm ocean at depth. The heat is brought to the surface by water that circulates up, through the crust and then returns to the ocean.

Method for operating a combustor in a fuel cell system

DOEpatents

Clingerman, Bruce J.; Mowery, Kenneth D.

2002-01-01

In one aspect, the invention provides a method of operating a combustor to heat a fuel processor to a desired temperature in a fuel cell system, wherein the fuel processor generates hydrogen (H.sub.2) from a hydrocarbon for reaction within a fuel cell to generate electricity. More particularly, the invention provides a method and select system design features which cooperate to provide a start up mode of operation and a smooth transition from start-up of the combustor and fuel processor to a running mode.

Nigeria`s Escravos gas project starts up

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nwokoma, M.

Nigeria`s Escravos gas project, Delta state, officially began late last year. The project -- 6,650 b/d of LPG and 1,740 b/d of condensate from 165 MMscfd of gas -- is the first attempt to rid Nigeria of incessant flares that have lit the Delta skies. Operator Chevron Nigeria Ltd. believes that the Escravos project will enable the joint venture to utilize a significant portion of the gas reserves, thus reducing gas flaring. The paper describes the background of the project, the gas fields, transport pipeline, process design, construction, and start-up.

Start-Up Success: Collection Development

ERIC Educational Resources Information Center

Awe, Susan C.

2010-01-01

All those who dream of working for themselves and being their own boss, whether they are fresh college graduates, recently unemployed, or newly retired from one career, have a thousand questions about where and how to begin. New entrepreneurs especially will need professional, expert help to start and run a small business effectively and…

Designing Effective Programmes for Encouraging the Business Start-up Process: Lessons from UK Experience.

ERIC Educational Resources Information Center

Gibb, Allan A.

1987-01-01

Outlines programs in the United Kingdom (UK) designed to encourage the starting of small businesses. Successful programs help entrepreneurs obtain financial support, get business training, and develop a business plan. Recommends emphasis on personal competency and motivation training as well as shorter courses. (CH)

Infant and Newborn Development

MedlinePlus

... During their first year, babies start to develop skills they will use for the rest of their lives. The normal growth of babies can be broken down into the following areas: Gross motor - controlling the head, sitting, crawling, maybe even starting to walk Fine motor - holding a spoon, picking up a piece ...

46 CFR 185.720 - Weekly maintenance and inspections.

Code of Federal Regulations, 2013 CFR

2013-10-01

... starting the engine; and (c) Each battery for rescue boat engine starting must be brought up to full charge at least once each week if: (1) The battery is of a type that requires recharging; and (2) The battery is not connected to a device that keeps it continuously charged. ...

46 CFR 185.720 - Weekly maintenance and inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... starting the engine; and (c) Each battery for rescue boat engine starting must be brought up to full charge at least once each week if: (1) The battery is of a type that requires recharging; and (2) The battery is not connected to a device that keeps it continuously charged. ...

46 CFR 185.720 - Weekly maintenance and inspections.

Code of Federal Regulations, 2012 CFR

2012-10-01

... starting the engine; and (c) Each battery for rescue boat engine starting must be brought up to full charge at least once each week if: (1) The battery is of a type that requires recharging; and (2) The battery is not connected to a device that keeps it continuously charged. ...

46 CFR 185.720 - Weekly maintenance and inspections.

Code of Federal Regulations, 2010 CFR

2010-10-01

... starting the engine; and (c) Each battery for rescue boat engine starting must be brought up to full charge at least once each week if: (1) The battery is of a type that requires recharging; and (2) The battery is not connected to a device that keeps it continuously charged. ...

46 CFR 185.720 - Weekly maintenance and inspections.

Code of Federal Regulations, 2014 CFR

2014-10-01

... starting the engine; and (c) Each battery for rescue boat engine starting must be brought up to full charge at least once each week if: (1) The battery is of a type that requires recharging; and (2) The battery is not connected to a device that keeps it continuously charged. ...

Helping Anxious Students Move Forward

ERIC Educational Resources Information Center

Minahan, Jessica

2018-01-01

Students with anxiety are prone to giving up a difficult work assignment before they even start it. So how can teachers help these students develop skills to successfully start and finish assignments and succeed in school? Behavioral analyst Jessica Minahan offers some practical solutions that teachers can implement in the classroom to motivate…

"Sunday-start" OC regimen popular but may pose risk.

PubMed

1991-03-01

There is a controversy over the effectiveness of the "Sunday-Start" oral contraceptive packaging. Some clinicians believe that the Sunday-start pills are dangerously ineffective because up to 6 days after menses can elapse before a new packet is started. This is particularly risky for women beginning orals, or switching from a combined pill to a new triphasic. These clinicians consider them merely a successful marketing strategy. Most physicians consider the Sunday-start pills more effective because of improved compliance. The reasons cited are that women are too confused to remember to start pill packets on odd days, and that they like having their menses occur on weekdays. Arguments on this side are studies showing that the length of the pill-free interval does not affect the efficacy of that cycle. There are not data to resolve this debate other than a report from Ortho Pharmaceuticals that women prefer Sunday-start 3:1.

Retention in care during the first 3 years of antiretroviral therapy for women in Malawi's option B+ programme: an observational cohort study.

PubMed

Haas, Andreas D; Tenthani, Lyson; Msukwa, Malango T; Tal, Kali; Jahn, Andreas; Gadabu, Oliver J; Spoerri, Adrian; Chimbwandira, Frank; van Oosterhout, Joep J; Keiser, Olivia

2016-04-01

Studies of Malawi's option B+ programme for HIV-positive pregnant and breastfeeding women have reported high loss to follow-up during pregnancy and at the start of antiretroviral therapy (ART), but few data exist about retention during breastfeeding and after weaning. We examined loss to follow-up and retention in care in patients in the option B+ programme during their first 3 years on ART. We analysed two data sources: aggregated facility-level data about patients in option B+ who started ART between Oct 1, 2011, and June 30, 2012, at 546 health facilities; and patient-level data from 20 large facilities with electronic medical record system for HIV-positive women who started ART between Sept 1, 2011, and Dec 31, 2013, under option B+ or because they had WHO clinical stages 3 or 4 disease or had CD4 counts of less than 350 cells per μL. We used facility-level data to calculate representative estimates of retention and loss to follow-up. We used patient-level data to study temporal trends in retention, timing of loss to follow-up, and predictors of no follow-up and loss to follow-up. We defined patients who were more than 60 days late for their first follow-up visit as having no follow-up and patients who were more than 60 days late for a subsequent visit as being lost to follow-up. We calculated proportions and cumulative probabilities of patients who had died, stopped ART, had no follow-up, were lost to follow-up, or were retained alive on ART for 36 months. We calculated odds ratios and hazard ratios to examine predictors of no follow-up and loss to follow-up. Analysis of facility-level data about patients in option B+ who had not transferred to a different facility showed retention in care to be 76·8% (20 475 of 26,658 patients) after 12 months, 70·8% (18,306 of 25,849 patients) after 24 months, and 69·7% (17,787 of 25,535 patients) after 36 months. Patient-level data included 29,145 patients. 14,630 (50·2%) began treatment under option B+. Patients in option B+ had a higher risk of having no follow-up and, for the first 2 years of ART, higher risk of loss to follow-up than did patients who started ART because they had CD4 counts less than 350 cells per μL or WHO clinical stage 3 or 4 disease. Risk of loss to follow-up during the third year was low and similar for patients retained for 2 years. Retention rates did not change as the option B+ programme matured. Our data suggest that pregnant and breastfeeding women who start ART immediately after they are diagnosed with HIV can be retained on ART through the option B+ programme, even after many have stopped breastfeeding. Interventions might be needed to improve retention in the first year on ART in option B+. Bill & Melinda Gates Foundation, Partnerships for Enhanced Engagement in Research Health, and National Institute of Allergy and Infectious Diseases. Copyright © 2016 Elsevier Ltd. All rights reserved.

Patients present earlier and survival has improved, but pre-ART attrition is high in a six-year HIV cohort data from Ethiopia.

PubMed

Mulissa, Zewdie; Jerene, Degu; Lindtjørn, Bernt

2010-10-11

Previous studies showed higher early mortality rates among patients treated with antiretroviral drugs in settings with limited resources. One of the reasons was late presentation of patients to care. With improved access to HIV services, we expect improvements in disease stage at presentation. Our objective was to assess the effect of improved availability of HIV services on patient presentation to care and subsequent pre-ART and on-ART outcomes. At Arba Minch Hospital in Ethiopia, we reviewed baseline characteristics and outcomes of 2191 adult HIV patients. Nearly a half were in WHO stage III at presentation. About two-thirds of the patients (1428) started ART. Patients enrolled in the early phase (OR = 4.03, 95% CI 3.07-5.27), men (OR = 1.78, 95%CI 1.47-2.16), and those aged 45 years and above (OR = 2.04, 95%CI 1.48-2.82) were at higher risk of being in advanced clinical stage at presentation. The pre-treatment mortality rate was 13.1 per 100 PYO, ranging from 1.4 in the rapid scale-up phase to 25.9 per 100 PYO in the early phase. A quarter of the patients were lost to follow-up before starting treatment. Being in less advanced stage (HR = 1.9, 95% CI = 1.6, 2.2), being in the recent cohort (HR = 2.0, 95% CI = 1.6, 2.6), and rural residence (HR = 1.8, 95% CI = 1.5, 2.2) were independent predictors of pre-ART loss to follow-up. Of those who started ART, 13.4% were lost to follow-up and 15.4% died. The survival improved during the study. Patients with advanced disease, men and older people had higher death rates. Patients started to present at earlier stages of their illness and death has decreased among adult HIV patients visiting Arba Minch Hospital. However, many patients were lost from pre-treatment follow-up. Early treatment start contributed to improved survival. Both pre-ART and on-ART patient retention mechanisms should be strengthened.

Cancer in populations living near nuclear facilities. A survey of mortality nationwide and incidence in two states

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jablon, S.; Hrubec, Z.; Boice, J.D. Jr.

Reports from the United Kingdom have described increases in leukemia and lymphoma among young persons living near certain nuclear installations. Because of concerns raised by these reports, a mortality survey was conducted in populations living near nuclear facilities in the United States. All facilities began service before 1982. Over 900,000 cancer deaths occurred from 1950 through 1984 in 107 counties with or near nuclear installations. Each study county was matched for comparison to three control counties in the same region. There were 1.8 million cancer deaths in the 292 control counties during the 35 years studied. Deaths due to leukemiamore » or other cancers were not more frequent in the study counties than in the control counties. For childhood leukemia mortality, the relative risk comparing the study counties with their controls before plant start-up was 1.08, while after start-up it was 1.03. For leukemia mortality at all ages, the relative risks were 1.02 before start-up and 0.98 after. For counties in two states, cancer incidence data were also available. For one facility, the standardized registration ratio for childhood leukemia was increased significantly after start-up. However, the increase also antedated the operation of this facility. The study is limited by the correlational approach and the large size of the geographic areas (counties) used. It does not prove the absence of any effect. If, however, any excess cancer risk was present in US counties with nuclear facilities, it was too small to be detected with the methods employed.« less

Linkage of microbial kinetics and bacterial community structure of MBR and hybrid MBBR-MBR systems to treat salinity-amended urban wastewater.

PubMed

Rodriguez-Sanchez, Alejandro; Leyva-Diaz, Juan Carlos; Gonzalez-Martinez, Alejandro; Poyatos, Jose Manuel

2017-11-01

Three pilot-scale bioreactors were started up and operated under salinity-amended urban wastewater feeding. The bioreactors were configured as membrane bioreactor and two different hybrid, moving bed biofilm reactor-membrane bioreactor and operated with a hydraulic retention time of 9.5 h, a solid residence time of 11.75 days and a total solids concentration of 2500 mg L -1 . The three systems showed excellent performance in suspended solids, BOD 5 , and COD removal (values of 96-100%, 97-99%, and 88-90%, respectively), but poor nitrogen removal (values of 20-30%). The bacterial community structure during the start-up phase and the stabilization phase were different, as showed by β-diversity analyses. The differences between aerobic and anoxic biomass-and between suspended and attached biomass-were higher at the start-up phase than at the stabilization phase. The start-up phase showed high abundances of Chiayiivirga (mean values around 3-12% relative abundance) and Luteimonas (5-8%), but in the stabilization phase, the domination belonged to Thermomonas (3-14%), Nitrobacter (3-7%), Ottowia (3-11.5%), and Comamonas (2-6%), among others. Multivariate redundancy analyses showed that Thermomonas and Nitrosomonas were positively correlated with fast autotrophic kinetics, while Caulobacter and Ottowia were positively correlated with fast heterotrophic kinetics. Nitrobacter, Rhodanobacter, and Comamonas were positively correlated with fast autotrophic and heterotrophic kinetics. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1483-1495, 2017. © 2017 American Institute of Chemical Engineers.

Experience with Fingolimod in Clinical Practice

PubMed Central

Hersh, Carrie M.; Hara-Cleaver, Claire; Rudick, Richard A.; Cohen, Jeffrey A.; Bermel, Robert A.; Ontaneda, Daniel

2015-01-01

Aim To report experience with fingolimod in clinical practice. Design/Methods Patients in an academic medical center who were prescribed fingolimod from October 2010 to August 2011 were identified through the electronic medical record and followed for 12 months after fingolimod initiation. Adverse effects, clinical measures, MRI data, and quality of life measures were assessed. Results Three hundred seventeen patients started fingolimod. Eleven patients were treatment naïve (3.5%) and 76 (24.0%) had remote disease modifying therapy use prior to fingolimod. One hundred fifty-one (47.6%) switched because of patient preference and 79 (24.9%) switched because of breakthrough disease. About 11.6% transitioned from natalizumab. Follow-up data were available for 306 patients (96.5%) with mean follow-up time 332 days. Fingolimod was discontinued in 76 of 306 patients (24.8%) at mean 248 days after fingolimod start. Discontinuation most often was due to adverse effects (n=40) or breakthrough disease (n=22). Among patients who started fingolimod with available 12 month follow-up data, 267 (87.3%) remained relapse free and 256 (83.7%) had no relapses or gadolinium enhancement. Time to first relapse occurred at mean 282 days after fingolimod initiation. Quality of life measures remained stable at follow-up. Conclusions Fingolimod was discontinued at a higher rate in clinical practice than in clinical trials. Discontinuation was primarily due to adverse effects or breakthrough disease. Disease activity was adequately controlled in most patients who started fingolimod. This clinical practice cohort is consistent with efficacy data from phase 3 trials and describes the most common tolerability issues in clinical practice. PMID:25271798

Indigenous microbial capability in solid manure residues to start-up solid-phase anaerobic digesters.

PubMed

Yap, S D; Astals, S; Jensen, P D; Batstone, D J; Tait, S

2017-06-01

Batch solid-phase anaerobic digestion is a technology for sustainable on-farm treatment of solid residues, but is an emerging technology that is yet to be optimised with respect to start-up and inoculation. In the present study, spent bedding from two piggeries (site A and B) were batch digested at total solids (TS) concentration of 5, 10 and 20% at mesophilic (37°C) and thermophilic (55°C) temperatures, without adding an external inoculum. The results showed that the indigenous microbial community present in spent bedding was able to recover the full methane potential of the bedding (140±5 and 227±6L CH 4 kgVS fed -1 for site A and B, respectively), but longer treatment times were required than for digestion with an added external inoculum. Nonetheless, at high solid loadings (i.e. TS level>10%), the digestion performance was affected by chemical inhibition due to ammonia and/or humic acid. Thermophilic temperatures did not influence digestion performance but did increase start-up failure risk. Further, inoculation of residues from the batch digestion to subsequent batch enhanced start-up and achieved full methane potential recovery of the bedding. Inoculation with liquid residue (leachate) was preferred over a solid residue, to preserve treatment capacity for fresh substrate. Overall, the study highlighted that indigenous microbial community in the solid manure residue was capable of recovering full methane potential and that solid-phase digestion was ultimately limited by chemical inhibition rather than lack of suitable microbial community. Copyright © 2017 Elsevier Ltd. All rights reserved.

Qualification of CASMO5 / SIMULATE-3K against the SPERT-III E-core cold start-up experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grandi, G.; Moberg, L.

SIMULATE-3K is a three-dimensional kinetic code applicable to LWR Reactivity Initiated Accidents. S3K has been used to calculate several international recognized benchmarks. However, the feedback models in the benchmark exercises are different from the feedback models that SIMULATE-3K uses for LWR reactors. For this reason, it is worth comparing the SIMULATE-3K capabilities for Reactivity Initiated Accidents against kinetic experiments. The Special Power Excursion Reactor Test III was a pressurized-water, nuclear-research facility constructed to analyze the reactor kinetic behavior under initial conditions similar to those of commercial LWRs. The SPERT III E-core resembles a PWR in terms of fuel type, moderator,more » coolant flow rate, and system pressure. The initial test conditions (power, core flow, system pressure, core inlet temperature) are representative of cold start-up, hot start-up, hot standby, and hot full power. The qualification of S3K against the SPERT III E-core measurements is an ongoing work at Studsvik. In this paper, the results for the 30 cold start-up tests are presented. The results show good agreement with the experiments for the reactivity initiated accident main parameters: peak power, energy release and compensated reactivity. Predicted and measured peak powers differ at most by 13%. Measured and predicted reactivity compensations at the time of the peak power differ less than 0.01 $. Predicted and measured energy release differ at most by 13%. All differences are within the experimental uncertainty. (authors)« less

Long terms trends in CD4+ cell counts, CD8+ cell counts, and the CD4+ : CD8+ ratio

PubMed Central

Hughes, Rachael A.; May, Margaret T.; Tilling, Kate; Taylor, Ninon; Wittkop, Linda; Reiss, Peter; Gill, John; Schommers, Philipp; Costagliola, Dominique; Guest, Jodie L.; Lima, Viviane D.; d’Arminio Monforte, Antonella; Smith, Colette; Cavassini, Matthias; Saag, Michael; Castilho, Jessica L.; Sterne, Jonathan A.C.

2018-01-01

Objective: Model trajectories of CD4+ and CD8+ cell counts after starting combination antiretroviral therapy (ART) and use the model to predict trends in these counts and the CD4+ : CD8+ ratio. Design: Cohort study of antiretroviral-naïve HIV-positive adults who started ART after 1997 (ART Cohort Collaboration) with more than 6 months of follow-up data. Methods: We jointly estimated CD4+ and CD8+ cell count trends and their correlation using a bivariate random effects model, with linear splines describing their population trends, and predicted the CD4+ : CD8+ ratio trend from this model. We assessed whether CD4+ and CD8+ cell count trends and the CD4+ : CD8+ ratio trend varied according to CD4+ cell count at start of ART (baseline), and, whether these trends differed in patients with and without virological failure more than 6 months after starting ART. Results: A total of 39 979 patients were included (median follow-up was 53 months). Among patients with baseline CD4+ cell count at least 50 cells/μl, predicted mean CD8+ cell counts continued to decrease between 3 and 15 years post-ART, partly driving increases in the predicted mean CD4+ : CD8+ ratio. During 15 years of follow-up, normalization of the predicted mean CD4+ : CD8+ ratio (to >1) was only observed among patients with baseline CD4+ cell count at least 200 cells/μl. A higher baseline CD4+ cell count predicted a shorter time to normalization. Conclusion: Declines in CD8+ cell count and increases in CD4+ : CD8+ ratio occurred up to 15 years after starting ART. The likelihood of normalization of the CD4+ : CD8+ ratio is strongly related to baseline CD4+ cell count. PMID:29851663

Start-up circuit upgrading to reduce the erosion of the rotor blades of the last stages of steam turbines and prevent the mass strips of stellite plates

NASA Astrophysics Data System (ADS)

Bozhko, V. V.; Gorin, A. V.; Zaitsev, I. V.; Kovalev, I. A.; Nosovitskii, I. A.; Orlik, V. G.; Lomagin, S. N.; Chernov, V. P.

2017-03-01

At turbine starts with low steam flow rates in idle mode, the low-pressure rotor blades consume energy, causing the ventilation heating of the stages and creating higher depression in them than in the condenser. This leads to the return steam flows in the exhaust of the low-pressure cylinder (LPC), reducing the heat due to the moisture of starting steam damps and cooling injections. It is shown that, as a result of upgrading with the transition to fully milled shroud platforms of rotor blades, the depression in the stages decreases and their cooling efficiency is reduced due to the removal of an elastic turn of the rotor blades under the action of centrifugal forces and seal of them by periphery. Heating the rotor blades of the last stages exceeds the temperature threshold of soldering resistance of stellite plates (150°C), and their mass strips begin. The start-up circuit providing both the temperature retention of the last stages lower the soldering resistance threshold due to overwetting the steam damps up to saturation condition and the high degree of removal from the dump steam of excessive erosive-dangerous condensed moisture was proposed, applied, and tested at the operating power unit. The investment in the development and application of the new start-up circuit are compensated in the course of a year owing to guaranteed prevention of the strips of stellite plates that lengthens the service life of the rotor blades of the last stages as well as increase of the rotor blade efficiency due to the sharp decrease of erosive wear of the profiles and reduction of their surface roughness. This reduces the annual consumption of equivalent fuel by approximately 1000 t for every 100 MW of installed capacity.

Treatment Initiation, Program Attrition and Patient Treatment Outcomes Associated with Scale-Up and Decentralization of HIV Care in Rural Malawi

PubMed Central

McGuire, Megan; Pinoges, Loretxu; Kanapathipillai, Rupa; Munyenyembe, Tamika; Huckabee, Martha; Makombe, Simon; Szumilin, Elisabeth; Heinzelmann, Annette; Pujades-Rodríguez, Mar

2012-01-01

Objective To describe patient antiretroviral therapy (cART) outcomes associated with intensive decentralization of services in a rural HIV program in Malawi. Methods Longitudinal analysis of data from HIV-infected patients starting cART between August 2001 and December 2008 and of a cross-sectional immunovirological assessment conducted 12 (±2) months after therapy start. One-year mortality, lost to follow-up, and attrition (deaths and lost to follow-up) rates were estimated with exact Poisson 95% confidence intervals (CI) by type of care delivery and year of initiation. Association of virological suppression (<50 copies/mL) and immunological success (CD4 gain ≥100 cells/µL), with type of care was investigated using multiple logistic regression. Results During the study period, 4322 cART patients received centralized care and 11,090 decentralized care. At therapy start, patients treated in decentralized health facilities had higher median CD4 count levels (167 vs. 130 cell/µL, P<0.0001) than other patients. Two years after cART start, program attrition was lower in decentralized than centralized facilities (9.9 per 100 person-years, 95% CI: 9.5–10.4 vs. 20.8 per 100 person-years, 95% CI: 19.7–22.0). One year after treatment start, differences in immunological success (adjusted OR = 1.23, 95% CI: 0.83–1.83), and viral suppression (adjusted OR = 0.80, 95% CI: 0.56–1.14) between patients followed at centralized and decentralized facilities were not statistically significant. Conclusions In rural Malawi, 1- and 2-year program attrition was lower in decentralized than in centralized health facilities and no statistically significant differences in one-year immunovirological outcomes were observed between the two health care levels. Longer follow-up is needed to confirm these results. PMID:23077473

Plasma current start-up by the outer ohmic heating coils in the Saskatchewan TORus Modified (STOR-M) iron core tokamak

DOE PAGES

Mitarai, O.; Xiao, C.; McColl, D.; ...

2015-03-24

A plasma current up to 15 kA has been driven with outer ohmic heating (OH) coils in the STOR-M iron core tokamak. Even when the inner OH coil is disconnected, the outer OH coils alone can induce the plasma current as primary windings and initial breakdown are even easier in this coil layout. Our results suggest a possibility to use an iron core in a spherical tokamak to start up the plasma current without a central solenoid. Finally, the effect of the iron core saturation on the extension of the discharge pulse length has been estimated for further experiments inmore » the STOR-M tokamak.« less

Plasma current start-up by the outer ohmic heating coils in the Saskatchewan TORus Modified (STOR-M) iron core tokamak

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitarai, O.; Xiao, C.; McColl, D.

A plasma current up to 15 kA has been driven with outer ohmic heating (OH) coils in the STOR-M iron core tokamak. Even when the inner OH coil is disconnected, the outer OH coils alone can induce the plasma current as primary windings and initial breakdown are even easier in this coil layout. Our results suggest a possibility to use an iron core in a spherical tokamak to start up the plasma current without a central solenoid. Finally, the effect of the iron core saturation on the extension of the discharge pulse length has been estimated for further experiments inmore » the STOR-M tokamak.« less

Design of a data-driven predictive controller for start-up process of AMT vehicles.

PubMed

Lu, Xiaohui; Chen, Hong; Wang, Ping; Gao, Bingzhao

2011-12-01

In this paper, a data-driven predictive controller is designed for the start-up process of vehicles with automated manual transmissions (AMTs). It is obtained directly from the input-output data of a driveline simulation model constructed by the commercial software AMESim. In order to obtain offset-free control for the reference input, the predictor equation is gained with incremental inputs and outputs. Because of the physical characteristics, the input and output constraints are considered explicitly in the problem formulation. The contradictory requirements of less friction losses and less driveline shock are included in the objective function. The designed controller is tested under nominal conditions and changed conditions. The simulation results show that, during the start-up process, the AMT clutch with the proposed controller works very well, and the process meets the control objectives: fast clutch lockup time, small friction losses, and the preservation of driver comfort, i.e., smooth acceleration of the vehicle. At the same time, the closed-loop system has the ability to reject uncertainties, such as the vehicle mass and road grade.

Fast start-up of the CANON process with a SABF and the effects of pH and temperature on nitrogen removal and microbial activity.

PubMed

Yue, Xiu; Yu, Guangping; Liu, Zhuhan; Tang, Jiali; Liu, Jian

2018-04-01

The long start-up time of the completely autotrophic nitrogen removal over nitrite (CANON) process is one of the main disadvantages of this system. In this paper, the CANON process with a submerged aerated biological filter (SABF) was rapidly started up within 26 days. It gave an average ammonium nitrogen removal rate (ANR) and a total nitrogen removal rate (TNR) of 94.2% and 81.3%, respectively. The phyla Proteobacteria and Planctomycetes were confirmed as the ammonia oxidizing bacteria (AOB) and anaerobic ammonium oxidation bacteria (AnAOB). The genus Candidatus Brocadia was the major contributor of nitrogen removal. pH and temperature affect the performance of the CANON process. This experimental results showed that the optimum pH and temperature were 8.0 and 30 °C, respectively, which gave the highest average ANR and TNR values of 94.6% and 85.1%, respectively. This research could promote the nitrogen removal ability of CANON process in the future. Copyright © 2018 Elsevier Ltd. All rights reserved.

Steam generator design for solar towers using solar salt as heat transfer fluid

NASA Astrophysics Data System (ADS)

González-Gómez, Pedro Ángel; Petrakopoulou, Fontina; Briongos, Javier Villa; Santana, Domingo

2017-06-01

Since the operation of a concentrating solar power plant depends on the intermittent character of solar energy, the steam generator is subject to daily start-ups, stops and load variations. Faster start-up and load changes increase the plant flexibility and the daily energy production. However, it involves high thermal stresses on thick-walled components. Continuous operational conditions may eventually lead to a material failure. For these reasons, it is important to evaluate the transient behavior of the proposed designs in order to assure the reliability. The aim of this work is to analyze different steam generator designs for solar power tower plants using molten salt as heat transfer fluid. A conceptual steam generator design is proposed and associated heat transfer areas and steam drum size are calculated. Then, dynamic models for the main parts of the steam generator are developed to represent its transient performance. A temperature change rate that ensures safe hot start-up conditions is studied for the molten salt. The thermal stress evolution on the steam drum is calculated as key component of the steam generator.

A Strong Start-up Scene Flourishes in the Life Sciences Capital Basel.

PubMed

Burckhardt, Peter

2014-12-01

Basel is known for its successful global players in Pharma, Agro and Chemicals. The wealth of top-tier companies, universities and academic institutions in such a small region is unparalleled. It creates an optimum climate for world-class research and its translation into successful businesses. This is also reflected in a strong start-up scene. Over the past decades the multinational players have shown that they are able to adapt to the ever-increasing challenges in the market. Basel has seen blue-chip company mergers, accompanied by the transfer of business assets into spin-off companies. This process created a mind-set for change which has positively influenced the local start-up environment. Actelion is one of these former spin-offs that successfully made the transition to become a global player. BioVersys and PIQUR are two of the most promising very early stage Swiss biotech companies. Many other examples can be found in Northwestern Switzerland. The region also offers a solid background of supporting activities. Infrastructure, coaching and all other support are offered and complement national innovation initiatives.

Evolution of microorganisms in thermophilic-dry anaerobic digestion.

PubMed

Montero, B; Garcia-Morales, J L; Sales, D; Solera, R

2008-05-01

Microbial population dynamics were studied during the start-up and stabilization periods in thermophilic-dry anaerobic digestion at lab-scale. The experimental protocol was defined to quantify Eubacteria and Archaea using Fluorescent in situ hybridization (FISH) in a continuously stirred tank reactor (CSTR), without recycling solids. The reactor was subjected to a programme of steady-state operation over a range of the retention times from 40 to 25 days, with an organic loading rate between 4.42 and 7.50 kg volatile solid/m3/day. Changes in microbial concentrations were linked to traditional performance parameters such as biogas production and VS removal. The relations of Eubacteria:Archaea and H2-utilising methanogens:acetate-utilising methanogens were 88:12 and 11:1, respectively, during start-up stage. Hydrogenotrophic methanogens, although important in the initial phase of the reactor start-up, were displaced by acetoclastic methanogens at steady-state, thus their relation were 7:32, respectively. The methane yield coefficient, the methane content in the biogas and VS removal were stabilized around 0.30 LCH4/gCOD, 50% and 80%, respectively. Methanogenic population correlated well with performance measurements.

International Space Station Lithium-Ion Battery Start-Up

NASA Technical Reports Server (NTRS)

Dalton, Penni J.; North, Tim; Bowens, Ebony; Balcer, Sonia

2017-01-01

International Space Station Lithium-Ion Battery Start-Up.The International Space Station (ISS) primary Electric Power System (EPS) was originally designed to use Nickel-Hydrogen (Ni-H2) batteries to store electrical energy. The electricity for the space station is generated by its solar arrays, which charge batteries during insolation for subsequent discharge during eclipse. The Ni-H2 batteries are designed to operate at a 35 depth of discharge (DOD) maximum during normal operation in a Low Earth Orbit. As the oldest of the 48 Ni-H2 battery Orbital Replacement Units (ORUs) has been cycling since September 2006, these batteries are now approaching their end of useful life. In 2010, the ISS Program began the development of Lithium-Ion (Li-ion) batteries to replace the Ni-H2 batteries and concurrently funded a Li-Ion ORU and cell life testing project. The first set of 6 Li-ion battery replacements were launched in December 2016 and deployed in January 2017. This paper will discuss the Li-ion battery on-orbit start-up and the status of the Li-Ion cell and ORU life cycle testing.

A double-stage start-up structure to limit the inrush current used in current mode charge pump

NASA Astrophysics Data System (ADS)

Cong, Liu; Xinquan, Lai; Hanxiao, Du; Yuan, Chi

2016-06-01

A double-stage start-up structure to limit the inrush current used in current-mode charge pump with wide input range, fixed output and multimode operation is presented in this paper. As a widely utilized power source implement, a Li-battery is always used as the power supply for chips. Due to the internal resistance, a potential drop will be generated at the input terminal of the chip with an input current. A false shut down with a low supply voltage will happen if the input current is too large, leading to the degradation of the Li-battery's service life. To solve this problem, the inrush current is limited by introducing a new start-up state. All of the circuits have been implemented with the NUVOTON 0.6 μm CMOS process. The measurement results show that the inrush current can be limited below 1 A within all input supply ranges, and the power efficiency is higher than the conventional structure. Project supported by the National Natural Science Foundation of China (No. 61106026).

Enhanced anaerobic digestion performance via combined solids- and leachate-based hydrolysis reactor inoculation.

PubMed

Wilson, L Paige; Sharvelle, Sybil E; De Long, Susan K

2016-11-01

Suboptimal conditions in anaerobic digesters (e.g., presence of common inhibitors ammonia and salinity) limit waste hydrolysis and lead to unstable performance and process failures. Application of inhibitor-tolerant inocula improves hydrolysis, but approaches are needed to establish and maintain these desired waste-hydrolyzing bacteria in high-solids reactors. Herein, performance was compared for leach bed reactors (LBRs) seeded with unacclimated or acclimated inoculum (0-60% by mass) at start-up and over long-term operation. High quantities of inoculum (∼60%) increase waste hydrolysis and are beneficial at start-up or when inhibitors are increasing. After start-up (∼112days) with high inoculum quantities, leachate recirculation leads to accumulation of inhibitor-tolerant hydrolyzing bacteria in leachate. During long-term operation, low inoculum quantities (∼10%) effectively increase waste hydrolysis relative to without solids-derived inoculum. Molecular analyses indicated that combining digested solids with leachate-based inoculum doubles quantities of Bacteria contacting waste over a batch and supplies additional desirable phylotypes Bacteriodes and Clostridia. Copyright © 2016 Elsevier Ltd. All rights reserved.

Marathon Group Therapy: Potential for University Counseling Centers and Beyond

ERIC Educational Resources Information Center

Stanger, Thomas; Harris, Rafael S., Jr.

2005-01-01

A descriptive analysis of marathon group therapy was conducted, specifying issues of set-up, screening, preparation, start-up, introduction to group process, facilitating therapeutic moments throughout the weekend, termination, and follow-up. Factors and dynamics unique to this modality are outlined for marathon groups in university counseling…

Dna Sequencing

DOEpatents

Hetrick, Robert Eugene; Hilbert, Harold Sean; Parsons, Michael Howard; Stockhausen, William Francis

1997-10-07

A fuel injection system used in the intake air passageway of an internal combustion engine has a strategy for reducing cold start hydrocarbon emissions. The fuel injector has an actuator which allows the fuel spray pattern to be varied from one which is widely dispersed and atomized to one which is only weakly dispersed. A strategy for varying the spray pattern during the engine warm-up period after cold start is disclosed. The strategy increases evaporation within the passageway so that cold start overfuelling and attendant hydrocarbon emissions are reduced.

Influence of dissolved oxygen concentration on the start-up of the anammox-based process: ELAN®.

PubMed

Morales, N; Val del Río, A; Vázquez-Padín, J R; Gutiérrez, R; Fernández-González, R; Icaran, P; Rogalla, F; Campos, J L; Méndez, R; Mosquera-Corral, A

2015-01-01

The anammox-based process ELAN® was started-up in two different sequencing batch reactor (SBR) pilot plant reactors treating municipal anaerobic digester supernatant. The main difference in the operation of both reactors was the dissolved oxygen (DO) concentration in the bulk liquid. SBR-1 was started at a DO value of 0.4 mg O2/L whereas SBR-2 was started at DO values of 3.0 mg O2/L. Despite both reactors working at a nitrogen removal rate of around 0.6 g N/(L d), in SBR-1, granules represented only a small fraction of the total biomass and reached a diameter of 1.1 mm after 7 months of operation, while in SBR-2 the biomass was mainly composed of granules with an average diameter of 3.2 mm after the same operational period. Oxygen microelectrode profiling revealed that granules from SBR-2 where only fully penetrated by oxygen with DO concentrations of 8 mg O2/L while granules from SBR-1 were already oxygen penetrated at DO concentrations of 1 mg O2/L. In this way granules from SBR-2 performed better due to the thick layer of ammonia oxidizing bacteria, which accounted for up to 20% of all the microbial populations, which protected the anammox bacteria from non-suitable liquid media conditions.

Leflunomide in active rheumatoid arthritis: a prospective study in daily practice.

PubMed

Van Roon, E N; Jansen, T L Th A; Mourad, L; Houtman, P M; Bruyn, G A W; Griep, E N; Wilffert, B; Tobi, H; Brouwers, J R B J

2004-06-01

We prospectively studied the efficacy, incidence of adverse drug reactions and withdrawal from leflunomide in an outpatient population with rheumatoid arthritis in a setting of care-as-usual. In this prospective case series study, from outpatient medical records a standard dataset was collected including patient and disease characteristics, data on leflunomide use and adverse drug reactions. During the study period 136 rheumatoid arthritis patients started leflunomide. Median (range) follow-up duration was 317 (11-911) days. Sixty-five percent of patients experienced at least one adverse drug reaction related to leflunomide. During follow-up 76 patients (56%) withdrew from leflunomide treatment, mainly because of adverse drug reactions (29%) or lack of efficacy (13%). The overall incidence density for withdrawal from leflunomide was 56.2 per 100 patient-years. Complete data for calculating efficacy using a validated disease activity score on 28 joints (DAS(28)) was available for 48, 36, and 35% of patients at 2, 6, and 12 months follow-up, respectively. Within a 12-month period after start of leflunomide treatment 76% of the evaluable patients were classified as moderate or good responders according to the DAS(28) response criteria. In the setting of care-as-usual, rheumatoid arthritis patients starting leflunomide frequently experienced adverse drug reactions. More than half of the patients withdrew from leflunomide treatment within a year after start of leflunomide treatment, mainly because of adverse drug reactions.

Leflunomide in active rheumatoid arthritis: a prospective study in daily practice.

PubMed

Van Roon, E N; Jansen, T L Th A; Mourad, L; Houtman, P M; Bruyn, G A W; Griep, E N; Wilffert, B; Tobi, H; Brouwers, J R B J

2004-08-01

We prospectively studied the efficacy, incidence of adverse drug reactions and withdrawal from leflunomide in an outpatient population with rheumatoid arthritis in a setting of care-as-usual. In this prospective case series study, a standard dataset was collected from outpatient medical records, including patient and disease characteristics, data on leflunomide use and adverse drug reactions. During the study period 136 rheumatoid arthritis patients started leflunomide. Median (range) follow-up duration was 317 (11-911) days. Sixty-five percent of patients experienced at least one adverse drug reaction related to leflunomide. During follow-up 76 patients (56%) withdrew from leflunomide treatment, mainly because of adverse drug reactions (29%) or lack of efficacy (13%). The overall incidence density for withdrawal from leflunomide was 56.2 per 100 patient years. Complete data for calculating efficacy using a validated disease activity score on 28 joints (DAS(28)) was available for 48, 36, and 35% of patients at 2, 6, and 12 months follow-up, respectively. Within a 12-month period after start of leflunomide treatment 76% of the evaluable patients were classified as moderate or good responders according to the DAS(28) response criteria. In the setting of care-as-usual rheumatoid arthritis patients starting leflunomide frequently experienced adverse drug reactions. More than half of the patients withdrew from leflunomide treatment within 1 year of starting leflunomide treatment, mainly because of adverse drug reactions.

Fresh Start: Evaluation Report and Executive Summary

ERIC Educational Resources Information Center

Gorard, Stephen; Siddiqui, Nadia; See, Beng Huat

2015-01-01

Fresh Start (FS) is a catch-up literacy intervention for pupils at risk of falling behind their peers in early secondary schooling. It provides systematic and rigorous practice in phonics so that pupils are at an appropriate level to join the mainstream group after completion of the intervention. Pupils are assessed and then grouped according to…

"I Am Much More than Just a Mum". Social Capital, Empowerment and Sure Start

ERIC Educational Resources Information Center

Bagley, Carl; Ackerley, Clare L.

2006-01-01

An earlier article published in this journal sought to recover the views of professionals concerned with the delivery and implementation of a "Third Way" multiagency programme tackling the social exclusion of young children and their families known as Sure Start. The tentative findings suggested a "bottom-up" partnership…

Entrepreneurial Education at the Postsecondary Level.

ERIC Educational Resources Information Center

Clayton, Graham

Since 1984, Canada has experienced roughly 150,000 new business start-ups each year. Most of these businesses start small and remain small, yet they have had a significant impact on Canada's economic well-being. Unfortunately, somewhere between 70% and 80% of the new businesses fail to survive beyond 5 years. These statistics underscore the need…

How Do I Start a Property Records System?

ERIC Educational Resources Information Center

Whyman, Wynne

2003-01-01

A property records system organizes data to be utilized by a camp's facilities department and integrated into other areas. Start by deciding what records to keep and allotting the time. Then develop consistent procedures, including organizing data, creating a catalog, making back-up copies, and integrating procedures. Use software tools. A good…

Charter Starters Leadership Training Workbook 1: Start-Up Logistics.

ERIC Educational Resources Information Center

Ley, Joyce

This workbook is the first in a series devoted to all areas of charter-school development. It addresses the logistics of starting a school, such as drafting a charter, creating a vision and mission, accessing expert information, navigating the application process, acquiring a facility, establishing a legal entity, and contracting for services. The…

Hazardous substances releases associated with Hurricanes Katrina and Rita in industrial settings, Louisiana and Texas.

PubMed

Ruckart, Perri Zeitz; Orr, Maureen F; Lanier, Kenneth; Koehler, Allison

2008-11-15

The scientific literature concerning the public health response to the unprecedented hurricanes striking the Gulf Coast in August and September 2005 has focused mainly on assessing health-related needs and surveillance of injuries, infectious diseases, and other illnesses. However, the hurricanes also resulted in unintended hazardous substances releases in the affected states. Data from two states (Louisiana and Texas) participating in the Hazardous Substances Emergency Events Surveillance (HSEES) system were analyzed to describe the characteristics of hazardous substances releases in industrial settings associated with Hurricanes Katrina and Rita. HSEES is an active multi-state Web-based surveillance system maintained by the Agency for Toxic Substances and Disease Registry (ATSDR). In 2005, 166 hurricane-related hazardous substances events in industrial settings in Louisiana and Texas were reported. Most (72.3%) releases were due to emergency shut downs in preparation for the hurricanes and start-ups after the hurricanes. Emphasis is given to the contributing causal factors, hazardous substances released, and event scenarios. Recommendations are made to prevent or minimize acute releases of hazardous substances during future hurricanes, including installing backup power generation, securing equipment and piping to withstand high winds, establishing procedures to shutdown process operations safely, following established and up-to-date start-up procedures and checklists, and carefully performing pre-start-up safety reviews.

A mathematical model of the heat and fluid flows in direct-chill casting of aluminum sheet ingots and billets

NASA Astrophysics Data System (ADS)

Mortensen, Dag

1999-02-01

A finite-element method model for the time-dependent heat and fluid flows that develop during direct-chill (DC) semicontinuous casting of aluminium ingots is presented. Thermal convection and turbulence are included in the model formulation and, in the mushy zone, the momentum equations are modified with a Darcy-type source term dependent on the liquid fraction. The boundary conditions involve calculations of the air gap along the mold wall as well as the heat transfer to the falling water film with forced convection, nucleate boiling, and film boiling. The mold wall and the starting block are included in the computational domain. In the start-up period of the casting, the ingot domain expands over the starting-block level. The numerical method applies a fractional-step method for the dynamic Navier-Stokes equations and the “streamline upwind Petrov-Galerkin” (SUPG) method for mixed diffusion and convection in the momentum and energy equations. The modeling of the start-up period of the casting is demonstrated and compared to temperature measurements in an AA1050 200×600 mm sheet ingot.

A race against time: can CO-OPs and provider start-ups survive in the health insurance marketplaces?

PubMed

Eggbeer, Bill

2015-12-01

> The Affordable Care Act's state and federal health insurance marketplaces, designed to provide affordable insurance coverage to individuals and small groups, are proving hostile territory to new market entrants. Efforts to inject competition into the marketplaces are being challenged by the wide-scale withdrawal o consumer-operated and oriented plans (CO-OPs). Meanwhile, premiums appear likely to increase for consumers as plans seek to balance medical losses. Flaws in the "Three R's" (reinsurance, risk corridors, and risk-adjustment) program are viewed as a threat to the survival of CO-OPs and start-ups.

Developing workshop module of realistic mathematics education: Follow-up workshop

NASA Astrophysics Data System (ADS)

Palupi, E. L. W.; Khabibah, S.

2018-01-01

Realistic Mathematics Education (RME) is a learning approach which fits the aim of the curriculum. The success of RME in teaching mathematics concepts, triggering students’ interest in mathematics and teaching high order thinking skills to the students will make teachers start to learn RME. Hence, RME workshop is often offered and done. This study applied development model proposed by Plomp. Based on the study by RME team, there are three kinds of RME workshop: start-up workshop, follow-up workshop, and quality boost. However, there is no standardized or validated module which is used in that workshops. This study aims to develop a module of RME follow-up workshop which is valid and can be used. Plopm’s developmental model includes materials analysis, design, realization, implementation, and evaluation. Based on the validation, the developed module is valid. While field test shows that the module can be used effectively.

Analysis of Modeling Assumptions used in Production Cost Models for Renewable Integration Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stoll, Brady; Brinkman, Gregory; Townsend, Aaron

2016-01-01

Renewable energy integration studies have been published for many different regions exploring the question of how higher penetration of renewable energy will impact the electric grid. These studies each make assumptions about the systems they are analyzing; however the effect of many of these assumptions has not been yet been examined and published. In this paper we analyze the impact of modeling assumptions in renewable integration studies, including the optimization method used (linear or mixed-integer programming) and the temporal resolution of the dispatch stage (hourly or sub-hourly). We analyze each of these assumptions on a large and a small systemmore » and determine the impact of each assumption on key metrics including the total production cost, curtailment of renewables, CO2 emissions, and generator starts and ramps. Additionally, we identified the impact on these metrics if a four-hour ahead commitment step is included before the dispatch step and the impact of retiring generators to reduce the degree to which the system is overbuilt. We find that the largest effect of these assumptions is at the unit level on starts and ramps, particularly for the temporal resolution, and saw a smaller impact at the aggregate level on system costs and emissions. For each fossil fuel generator type we measured the average capacity started, average run-time per start, and average number of ramps. Linear programming results saw up to a 20% difference in number of starts and average run time of traditional generators, and up to a 4% difference in the number of ramps, when compared to mixed-integer programming. Utilizing hourly dispatch instead of sub-hourly dispatch saw no difference in coal or gas CC units for either start metric, while gas CT units had a 5% increase in the number of starts and 2% increase in the average on-time per start. The number of ramps decreased up to 44%. The smallest effect seen was on the CO2 emissions and total production cost, with a 0.8% and 0.9% reduction respectively when using linear programming compared to mixed-integer programming and 0.07% and 0.6% reduction, respectively, in the hourly dispatch compared to sub-hourly dispatch.« less

Malawi's contribution to "3 by 5": achievements and challenges.

PubMed

Libamba, Edwin; Makombe, Simon D; Harries, Anthony D; Schouten, Erik J; Yu, Joseph Kwong-Leung; Pasulani, Olesi; Mhango, Eustice; Aberle-Grasse, John; Hochgesang, Mindy; Limbambala, Eddie; Lungu, Douglas

2007-02-01

Many resource-poor countries have started scaling up antiretroviral therapy (ART). While reports from individual clinics point to successful implementation, there is limited information about progress in government institutions at a national level. Malawi started national ART scale-up in 2004 using a structured approach. There is a focus on one generic, fixed-dose combination treatment with stavudine, lamivudine and nevirapine. Treatment is delivered free of charge to eligible patients with HIV and there is a standardized system for recruiting patients, monthly follow-up, registration, monitoring and reporting of cases and outcomes. All treatment sites receive quarterly supervision and evaluation. In January 2004, there were nine public sector facilities delivering ART to an estimated 4 000 patients. By December 2005, there were 60 public sector facilities providing free ART to 37,840 patients using national standardized systems. Analysis of quarterly cohort treatment outcomes at 12 months showed 80% of patients were alive, 10% dead, 9% lost to follow-up and 1% had stopped treatment. Achievements were the result of clear national ART guidelines, implementing partners working together, an intensive training schedule focused on clinical officers and nurses, a structured system of accrediting facilities for ART delivery, quarterly supervision and monitoring, and no stock-outs of antiretroviral drugs. The main challenges are to increase the numbers of children, pregnant women and patients with tuberculosis being started on ART, and to avert high early mortality and losses to follow-up. The capacity of the health sector to cope with escalating case loads and to scale up prevention alongside treatment will determine the future success of ART delivery in Malawi.

Develop and test fuel cell powered on-site integrated total energy systems. Phase 3: Full-scale power plant development

NASA Technical Reports Server (NTRS)

Kaufman, A.; Pudick, S.; Wang, C. L.; Werth, J.; Whelan, J. A.

1984-01-01

Two 25-cell, 13 inch x 23 inch (4kW) stacks were started up to evaluate the reliability of component and stack technology developed through the end of 1983. Both stacks started up well and are running satisfactorily on hydrogen-air after 1900 hours and 800 hours, respectively. A synthetic-reformat mixing station is nearing completion, and both stacks will be operated on reformate fuel. A stack-protection control system was placed in operation for Stack No. 2, and a similar set-up is in preparation for Stack No. 1. This system serves to change operating conditions or shut the stack down to avoid deleterious effects from nonstack-related upsets. The capability will greatly improve changes of obtaining meaningful long-term test data.

Supervision, monitoring and evaluation of nationwide scale-up of antiretroviral therapy in Malawi.

PubMed Central

Libamba, Edwin; Makombe, Simon; Mhango, Eustice; de Ascurra Teck, Olga; Limbambala, Eddie; Schouten, Erik J.; Harries, Anthony D.

2006-01-01

OBJECTIVE: To describe the supervision, monitoring and evaluation strategies used to assess the delivery of antiretroviral therapy during nationwide scale-up of treatment in Malawi. METHODS: In the first quarter of 2005, the HIV Unit of the Ministry of Health and its partners (the Lighthouse Clinic; Médecins Sans Frontières-Belgium, Thyolo district; and WHO's Country Office) undertook structured supervision and monitoring of all public sector health facilities in Malawi delivering antiretroviral therapy. FINDINGS: Data monitoring showed that by the end of 2004, there were 13,183 patients (5274 (40%) male, 12 527 (95%) adults) who had ever started antiretroviral therapy. Of patients who had ever started, 82% (10 761/13,183) were alive and taking antiretrovirals; 8% (1026/13,183) were dead; 8% (1039/13,183) had been lost to follow up; <1% (106/13,183) had stopped treatment; and 2% (251/13,183) had transferred to another facility. Of those alive and on antiretrovirals, 98% (7098/7258) were ambulatory; 85% (6174/7258) were fit to work; 10% (456/4687) had significant side effects; and, based on pill counts, 96% (6824/7114) had taken their treatment correctly. Mistakes in the registration and monitoring of patients were identified and corrected. Drug stocks were checked, and one potential drug stock-out was averted. As a result of the supervisory visits, by the end of March 2005 recruitment of patients to facilities scheduled to start delivering antiretroviral therapy had increased. CONCLUSION: This report demonstrates the importance of early supervision for sites that are starting to deliver antiretroviral therapy, and it shows the value of combining data collection with supervision. Making regular supervisory and monitoring visits to delivery sites are essential for tracking the national scale-up of delivery of antiretrovirals. PMID:16628306

Incorporating Student-Centred Learning in Innovation and Entrepreneurship Education

ERIC Educational Resources Information Center

Harkema, Saskia J. M.; Schout, Henk

2008-01-01

Innovation and entrepreneurship are vital for economic growth, as was already asserted by Schumpeter in 1934. In a recent survey carried out by the Ministry of Economic Affairs (Dutch Ministry of Economic Affairs, 2006) a picture emerges of The Netherlands as lagging behind when it comes to starting a company, whereby start-ups of students coming…

Small Business Incubator Resource Kit.

ERIC Educational Resources Information Center

Small Business Administration, Washington, DC.

This kit consists of a set of resources to assist those interested in the start-up and management (incubation) of a new business. A guide to starting and managing a small business incubator (SBI) is provided. Included in the guide are the following: a discussion of the role and characteristics of the SBI concept; guidelines for carrying out the…

Setting Adolescents up for Success: Promoting a Policy to Delay High School Start Times

ERIC Educational Resources Information Center

Barnes, Margaux; Davis, Krista; Mancini, Mackenzie; Ruffin, Jasmine; Simpson, Tina; Casazza, Krista

2016-01-01

Background: A unique biological shift in sleep cycles occurs during adolescence causing later sleep and wake times. This shift is not matched by a concurrent modification in school start times, resulting in sleep curtailment for a large majority of adolescents. Chronic inadequate sleep is associated with poor academic performance including…

The Internet Guide for New Users.

ERIC Educational Resources Information Center

Dern, Daniel P.

This guide will help the new user get started on the Internet. It explains what the Internet is, how to use it, and how to think like an Internet user. Part 1, "Ramping Up, Getting Started," covers the basics of getting access to the Internet and general information about it. It includes a review of the history and technology of the…

40 CFR 90.409 - Engine dynamometer test run.

Code of Federal Regulations, 2014 CFR

2014-07-01

...). (3) Record all pre-test data specified in § 90.405(c). (4) Start the test cycle (see § 90.410) within... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Engine dynamometer test run. 90.409... Test Procedures § 90.409 Engine dynamometer test run. (a) Engine and dynamometer start-up. (1) Only...

40 CFR 86.340-79 - Gasoline-fueled engine dynamometer test run.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Observe pre-test procedures; § 86.339; (3) Start cooling system; (4) Start engine and operate in... be 5 minutes ±30 seconds. Sample flow may begin during the warm-up; (5) Read and record all pre-test... test run. 86.340-79 Section 86.340-79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

40 CFR 90.409 - Engine dynamometer test run.

Code of Federal Regulations, 2010 CFR

2010-07-01

...). (3) Record all pre-test data specified in § 90.405(c). (4) Start the test cycle (see § 90.410) within... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine dynamometer test run. 90.409... Test Procedures § 90.409 Engine dynamometer test run. (a) Engine and dynamometer start-up. (1) Only...

40 CFR 86.340-79 - Gasoline-fueled engine dynamometer test run.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Observe pre-test procedures; § 86.339; (3) Start cooling system; (4) Start engine and operate in... be 5 minutes ±30 seconds. Sample flow may begin during the warm-up; (5) Read and record all pre-test... test run. 86.340-79 Section 86.340-79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

40 CFR 90.409 - Engine dynamometer test run.

Code of Federal Regulations, 2013 CFR

2013-07-01

...). (3) Record all pre-test data specified in § 90.405(c). (4) Start the test cycle (see § 90.410) within... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Engine dynamometer test run. 90.409... Test Procedures § 90.409 Engine dynamometer test run. (a) Engine and dynamometer start-up. (1) Only...

40 CFR 86.340-79 - Gasoline-fueled engine dynamometer test run.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Observe pre-test procedures; § 86.339; (3) Start cooling system; (4) Start engine and operate in... be 5 minutes ±30 seconds. Sample flow may begin during the warm-up; (5) Read and record all pre-test... test run. 86.340-79 Section 86.340-79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

40 CFR 86.340-79 - Gasoline-fueled engine dynamometer test run.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Observe pre-test procedures; § 86.339; (3) Start cooling system; (4) Start engine and operate in... be 5 minutes ±30 seconds. Sample flow may begin during the warm-up; (5) Read and record all pre-test... test run. 86.340-79 Section 86.340-79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

40 CFR 90.409 - Engine dynamometer test run.

Code of Federal Regulations, 2012 CFR

2012-07-01

...). (3) Record all pre-test data specified in § 90.405(c). (4) Start the test cycle (see § 90.410) within... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Engine dynamometer test run. 90.409... Test Procedures § 90.409 Engine dynamometer test run. (a) Engine and dynamometer start-up. (1) Only...

40 CFR 90.409 - Engine dynamometer test run.

Code of Federal Regulations, 2011 CFR

2011-07-01

...). (3) Record all pre-test data specified in § 90.405(c). (4) Start the test cycle (see § 90.410) within... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Engine dynamometer test run. 90.409... Test Procedures § 90.409 Engine dynamometer test run. (a) Engine and dynamometer start-up. (1) Only...

Starting Labor-Management Quality of Work Life Programs.

ERIC Educational Resources Information Center

Brower, Michael

This report summarizes the experiences of the Massachusetts Quality of Working Life Center in assisting the attempted and actual start-up of a number of quality of work life (QWL) programs in 1976 and 1977 and in providing ongoing assistance. Lessons learned by the three sites the center launched, other sites, as well as those sites that chose not…

Starting up a Firm or Not: Differences in the Antecedents of Entrepreneurial Intentions

ERIC Educational Resources Information Center

Varamäki, Elina; Joensuu, Sanna; Viljamaa, Anmari

2016-01-01

Entrepreneurial intentions (EIs) and their antecedents have been extensively studied in student populations. The results suggest that higher education does not promote the formation of EI in students. This article examines the antecedents of intentions in two different student populations: those who are currently starting a firm and those who are…

Do Schools Begin Too Early?

ERIC Educational Resources Information Center

Edwards, Finley

2012-01-01

School start times vary considerably, both across the nation and within individual communities, with some schools beginning earlier than 7:30 a.m. and others after 9:00 a.m. Proponents of later start times, who have received considerable media attention in recent years, argue that many students who have to wake up early for school do not get…

Age, education and dementia related deaths. The Norwegian Counties Study and The Cohort of Norway.

PubMed

Strand, Bjørn Heine; Langballe, Ellen Melbye; Rosness, Tor A; Bergem, Astrid Liv Mina; Engedal, Knut; Nafstad, Per; Tell, Grethe S; Ormstad, Heidi; Tambs, Kristian; Bjertness, Espen

2014-10-15

An inverse relationship between educational level and dementia has been reported in several studies. In this study we investigated the relationship between educational level and dementia related deaths for cohorts of people all born during 1915-39. The cohorts were followed up from adulthood or old age, taking into account possible confounders and mediating paths. Our study population comprised participants in Norwegian health examination studies in the period 1974-2002; The Counties Study and Cohort of Norway (CONOR). Dementia related deaths were defined as deaths with a dementia diagnosis on the death certificate and linked using the Cause of Death Registry to year 2012. The study included 90,843 participants, 2.06 million person years and 2440 dementia related deaths. Cox regression was used to assess the association between education and dementia related deaths. Both high and middle educational levels were associated with lower dementia related death risk compared to those with low education when follow-up started in adulthood (35-49 years, high versus low education: HR=0.68, 95% confidence interval (CI) 0.50-0.93; 50-69 years, high versus low education: HR=0.52, 95% CI 0.34-0.80). However, when follow-up started at old age (70-80 years) there was no significant association between education and dementia related death. Restricting the study population to those born during a five-year period 1925-29 (the birth cohort overlapping all three age groups), gave similar main findings. The protective effects found for both high and middle educational level compared to low education were robust to adjustment for cardiovascular health and life style factors, suggesting education to be a protective factor for dementia related death. Both high and middle educational levels were associated with decreased dementia related death risk compared with low educational level when follow-up started in adulthood, but no association was observed when follow-up started at old age. Copyright © 2014 Elsevier B.V. All rights reserved.

Startup of air-cooled condensers and dry cooling towers at low temperatures of the cooling air

NASA Astrophysics Data System (ADS)

Milman, O. O.; Ptakhin, A. V.; Kondratev, A. V.; Shifrin, B. A.; Yankov, G. G.

2016-05-01

The problems of startup and performance of air-cooled condensers (ACC) and dry cooling towers (DCT) at low cooling air temperatures are considered. Effects of the startup of the ACC at sub-zero temperatures are described. Different options of the ACC heating up are analyzed, and examples of existing technologies are presented (electric heating, heating up with hot air or steam, and internal and external heating). The use of additional heat exchanging sections, steam tracers, in the DCT design is described. The need for high power in cases of electric heating and heating up with hot air is noted. An experimental stand for research and testing of the ACC startup at low temperatures is described. The design of the three-pass ACC unit is given, and its advantages over classical single-pass design at low temperatures are listed. The formation of ice plugs inside the heat exchanging tubes during the start-up of ACC and DCT at low cooling air temperatures is analyzed. Experimental data on the effect of the steam flow rate, steam nozzle distance from the heat-exchange surface, and their orientation in space on the metal temperature were collected, and test results are analyzed. It is noted that the surface temperature at the end of the heat up is almost independent from its initial temperature. Recommendations for the safe start-up of ACCs and DCTs are given. The heating flow necessary to sufficiently heat up heat-exchange surfaces of ACCs and DCTs for the safe startup is estimated. The technology and the process of the heat up of the ACC with the heating steam external supply are described by the example of the startup of the full-scale section of the ACC at sub-zero temperatures of the cooling air, and the advantages of the proposed start-up technology are confirmed.

Offering Patients Therapy Options in Unplanned Start (OPTiONS): Implementation of an educational program is feasible and effective.

PubMed

Machowska, Anna; Alscher, Mark Dominik; Vanga, Satyanarayana Reddy; Koch, Michael; Aarup, Michael; Qureshi, Abdul Rashid; Lindholm, Bengt; Rutherford, Peter

2017-01-13

Patients with unplanned dialysis start (UPS) have worse clinical outcomes than non-UPS patients, and receive peritoneal dialysis (PD) less frequently. In the OPTiONS study of UPS patients, an educational programme (UPS-EP) aiming at improving care of UPS patients by facilitating care pathways and enabling informed choice of dialysis modality was implemented. We here report on impact of UPS-EP on modality choice and clinical outcomes in UPS patients. This non-interventional, prospective, multi-center, observational study included 270 UPS patients from 26 centers in 6 European countries (Austria, Germany, Denmark, France, United Kingdom and Sweden) who prior to inclusion presented acutely, or were being followed by nephrologists but required urgent dialysis commencement by an acutely placed CVC or PD catheter. Effects of UPS-EP on choice and final decision of dialysis therapy and outcomes within 12 months of follow up were analysed. Among 270 UPS patients who had an unplanned start to dialysis, 214 were able to receive and 203 complete UPS-EP while 56 patients - who were older (p = 0.01) and had higher Charlson comorbidity index (CCI; p < 0.01) - did not receive UPS-EP. Among 177 patients who chose dialysis modality after UPS-EP, 103 (58%) chose PD (but only 86% of them received PD) and 74 (42%) chose HD (95% received HD). Logistic regression analysis showed that diabetes 1.88 (1.05 - 3.37) and receiving UPS-EP, OR = 4.74 (CI, 2.05 - 10.98) predicted receipt of PD. Patients choosing PD had higher CCI (p = 0.01), higher prevalence of congestive heart failure (p < 0.01) and myocardial infarction (p = 0.02), and were more likely in-patients (p = 0.02) or referred from primary care (p = 0.02). One year survival did not differ significantly between PD and HD patients. Peritonitis and bacteraemia rates were better than international guideline standards. UPS-EP predicted patient use of PD but 14% of those choosing PD after UPS-EP still did not receive the modality they preferred. Patient survival in patients choosing and/or receiving PD was similar to HD despite age and comorbidity disadvantages of the PD groups.

Tracking the seasonal cycle of coastal sea ice: Community-based observations and satellite remote sensing in service of societal needs

NASA Astrophysics Data System (ADS)

Eicken, Hajo; Lee, Olivia A.; Johnson, Mark A.; Pulsifer, Peter; Danielsen, Finn

2017-04-01

Break-up and freeze-up of coastal sea ice determine the timing and extent of a number of human activities, ranging from ice use by Indigenous hunters to coastal shipping. Yet, while major reductions in the extent of Arctic summer sea ice have been well studied, changes in its seasonal cycle have received less attention. Here, we discuss decadal scale changes and interannual variability in the timing of spring break-up and fall freeze-up, with a focus on coastal communities in Arctic Alaska. Observations of ice conditions by Indigenous sea-ice experts since 2006 indicate significant interannual variability in both the character and timing of freeze-up and break-up in the region. To aid in the archival and sharing of such observations, we have developed a database for community ice observations (eloka-arctic.org/sizonet). Development of this database addressed key questions ranging from community guidance on different levels of data sharing and access to the development of protocols that may lend themselves for implementation in the context of operational programs such as Global Cryosphere Watch. The lessons learned and tools developed through this effort may help foster the emergence of common observation protocols and sharing practices across the Arctic, as explored jointly with the Greenlandic PISUNA initiative and the European INTAROS project. For the Arctic Alaska region, we developed an algorithm to extract the timing of break-up and freeze-up from passive microwave satellite data, drawing on community-based observations. Data from 1979 to 2013 show break-up start arriving earlier by 5-9 days per decade and freeze-up start arriving later by 7-14 days per decade in the Chukchi and Beaufort Seas. The trends towards a shorter ice season observed over the past several decades point towards a substantial change in the winter ice regime by mid-century with incipient overlap of the end of the freeze-up and start of the break-up season as defined by coastal ice users.

Volcanic ash clouds; a continuing threat to international aviation

USGS Publications Warehouse

Scarone, H.

1987-01-01

Suddenly, an acrid odour began to pervade the aircraft, an eerie bluish glow lit up the edges of the wings, and in the cockpit the familiar hum of static started to break up the high-frequency communications. Then it happened.

Start-On-The-Part Transient Model for In-Situ Automated Tape Placement of Thermoplastic Composites

NASA Technical Reports Server (NTRS)

Costen, Robert c.; Marchello, Joseph M.

1997-01-01

Fabrication of a complex part by automated tape placement (ATP) can require starting up a new tape-end in the part interior, termed start-on-the-part. Careful thermal management of the starting transient is needed to achieve uniform crystallinity and inter-laminar weld strength - which is the objective of this modeling effort. The transient is modeled by a Fourier-Laplace transform solution of the time-dependent thermal transport equation in two spatial dimensions. The solution is subject to a quasi-steady approximation for the speed and length of the consolidation head. Sample calculations are done for the Langley ATP robot applying PEEK/carbon fiber composite and for two upgrades in robot performance. The head starts out almost at rest which meets an engineering requirement for accurate placement of the new tape-end. The head then rapidly accelerates until it reaches its steady state speed. This rapid acceleration, however, violates the quasi-steady approximation, so uniform weld strength and crystallinity during the starting transient are not actually achieved. The solution does give the elapsed time and distance from start-up to validity of the quasi-steady approximation - which quantifies the length of the non-uniform region. The elapsed time was always less than 0.1 s and the elapsed distance less than 1 cm. This quantification would allow the non-uniform region to be either trimmed away or compensated for in the design of a part. Such compensation would require experiments to measure the degree of non-uniformity, because the solution does not provide this information. The rapid acceleration suggests that the consolidation roller or belt be actively synchronized to avoid abrading the tape.

How to Create and Manipulate Radar Range-Doppler Plots

DTIC Science & Technology

2014-12-01

the radar interacts, we can then also simulate jamming it to produce false targets. We start by setting up the relevant radar equations that allow the...radar at r = 0 for the duration of the scenario, with the target at r = r0 at t = 0. To facilitate later discussion, suppose that t = 0 starts a coherent...interval. The time from the start of one pulse to the next is 100 µs, so that t ≃ 32×100µs. The range difference vtd/2 is then, making use of SI units, vtd

Retention in care of HIV-infected pregnant and lactating women starting ART under Option B+ in rural Mozambique.

PubMed

Llenas-García, Jara; Wikman-Jorgensen, Philip; Hobbins, Michael; Mussa, Manuel Aly; Ehmer, Jochen; Keiser, Olivia; Mbofana, Francisco; Wandeler, Gilles

2016-08-01

In 2013, Mozambique adopted Option B+, universal lifelong antiretroviral therapy (ART) for all pregnant and lactating women, as national strategy for prevention of mother-to-child transmission of HIV. We analysed retention in care of pregnant and lactating women starting Option B+ in rural northern Mozambique. We compared ART outcomes in pregnant ('B+ pregnant'), lactating ('B+ lactating') and non-pregnant non-lactating women of childbearing age starting ART according to clinical and/or immunological criteria ('own health') between July 2013 and June 2014. Lost to follow-up was defined as no contact >180 days after the last visit. Multivariable competing risk models were adjusted for type of facility (type 1 vs. peripheral type 2 health centre), age, WHO stage and time from HIV diagnosis to ART. Over 333 person-years of follow-up (243 'B+ pregnant', 65'B+ lactating' and 317 'own health' women), 3.7% of women died and 48.5% were lost to follow-up. 'B+ pregnant' and 'B+ lactating' women were more likely to be lost in the first year (57% vs. 56.9% vs. 31.6%; P < 0.001) and to have no follow-up after the first visit (42.4% vs. 29.2% vs. 16.4%; P < 0.001) than 'own health' women. In adjusted analyses, risk of being lost to follow-up was higher in 'B+ pregnant' (adjusted subhazard ratio [asHR]: 2.77; 95% CI: 2.18-3.50; P < 0.001) and 'B+ lactating' (asHR: 1.94; 95% CI: 1.37-2.74; P < 0.001). Type 2 health centre was the only additional significant risk factor for loss to follow-up. Retention among PLW starting option B+ ART was poor and mainly driven by early losses. The success of Option B+ for prevention of mother-to-child transmission of HIV in rural settings with weak health systems will depend on specific improvements in counselling and retention measures, especially at the beginning of treatment. © 2016 John Wiley & Sons Ltd.

High-temperature catalyst for catalytic combustion and decomposition

NASA Technical Reports Server (NTRS)

Mays, Jeffrey A. (Inventor); Lohner, Kevin A. (Inventor); Sevener, Kathleen M. (Inventor); Jensen, Jeff J. (Inventor)

2005-01-01

A robust, high temperature mixed metal oxide catalyst for propellant composition, including high concentration hydrogen peroxide, and catalytic combustion, including methane air mixtures. The uses include target, space, and on-orbit propulsion systems and low-emission terrestrial power and gas generation. The catalyst system requires no special preheat apparatus or special sequencing to meet start-up requirements, enabling a fast overall response time. Start-up transients of less than 1 second have been demonstrated with catalyst bed and propellant temperatures as low as 50 degrees Fahrenheit. The catalyst system has consistently demonstrated high decomposition effeciency, extremely low decomposition roughness, and long operating life on multiple test particles.

Converting MEMS technology into profits

NASA Astrophysics Data System (ADS)

Bryzek, Janusz

1998-08-01

This paper discusses issues related to transitioning a company from the advanced technology development phase (with a particular focus on MEMS) to a profitable business, with emphasis on start-up companies. It includes several case studies from (primarily) NovaSensor MEMS development history. These case studies illustrate strategic problems with which advanced MEMS technology developers have to be concerned. Conclusions from these case studies could be used as checkpoints for future MEMS developers to increase probability of profitable operations. The objective for this paper is to share the author's experience from multiple MEMS start-ups to accelerate development of the MEMS market by focusing state- of-the-art technologists on marketing issues.

Vapor Flow Patterns During a Start-Up Transient in Heat Pipes

NASA Technical Reports Server (NTRS)

Issacci, F.; Ghoniem, N, M.; Catton, I.

1996-01-01

The vapor flow patterns in heat pipes are examined during the start-up transient phase. The vapor core is modelled as a channel flow using a two dimensional compressible flow model. A nonlinear filtering technique is used as a post process to eliminate the non-physical oscillations of the flow variables. For high-input heat flux, multiple shock reflections are observed in the evaporation region. The reflections cause a reverse flow in the evaporation and circulations in the adiabatic region. Furthermore, each shock reflection causes a significant increase in the local pressure and a large pressure drop along the heat pipe.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brink, J.

Crude oil (c. 10,700 BOPD) was produced through temporary topside facilities in the Rolf Field offshore Denmark from January 7th to September 17th, 1986. These simple, unmanned and remote controlled facilities were a low cost solution to a problem caused by delays of the permanent topside facilities. Project execution time was two months from start of conceptual design until start-up of oil production. Installation works were performed from a jack-up drilling rig - in part simultaneously with drilling operations. Materials and equipment installed were obtained with very short delivery times. The facilties which were certified by a Certification Society andmore » approved by the Danish Authoritites included all necessary safety features. Total costs for the facilities amounted to c. 1 million US$ (excl. rig time for installation). Due to simplicity high reliability of the production system was obtained. Availability of the facilities for the entire period from start-up was 99.6 percent. The facilities were manned 3.2 percent of the total operating time mainly due to wireline work for reservoir monitoring. It is considered that the experience with the concept applied for the early production from the Rolf Field could form the basis for more simple and cost effective topside facilities for minor offshore fields.« less

Tolerability of outpatient antipsychotic treatment: 36-month results from the European Schizophrenia Outpatient Health Outcomes (SOHO) study.

PubMed

Novick, Diego; Haro, Josep Maria; Perrin, Elena; Suarez, David; Texeira, João Marques

2009-08-01

SOHO is a 3-year, prospective, observational study of schizophrenia patients who started a new antipsychotic in 10 European countries. Cohorts of patients were defined according to the antipsychotic started at baseline: olanzapine, risperidone, quetiapine, amisulpride, clozapine, oral typical and depot typical antipsychotics. Tolerability in terms of rates of extrapyramidal symptoms (EPS), tardive dyskinesia (TD), anticholinergic use, loss of libido/impotence, amenorrhoea/galactorrhoea/gynaecomastia, and weight change was assessed in 4939 patients who started monotherapy. Logistic regression models related medication initiated at study entry to adverse events over follow-up, adjusting by baseline differences among treatment cohorts. Patients taking typical antipsychotics or risperidone were more likely to experience EPS and TD during follow-up than patients taking olanzapine. Patients taking olanzapine were less likely to have loss of libido/impotence during follow-up than patients in the risperidone, amisulpride, clozapine, oral typical and depot typical cohorts. Weight gain occurred in all groups, but was greater with olanzapine. In conclusion, antipsychotics have different tolerability profiles in terms of the adverse events we monitored. Results should be interpreted conservatively due to the observational study design.

Detection of inter-turn short-circuit at start-up of induction machine based on torque analysis

NASA Astrophysics Data System (ADS)

Pietrowski, Wojciech; Górny, Konrad

2017-12-01

Recently, interest in new diagnostics methods in a field of induction machines was observed. Research presented in the paper shows the diagnostics of induction machine based on torque pulsation, under inter-turn short-circuit, during start-up of a machine. In the paper three numerical techniques were used: finite element analysis, signal analysis and artificial neural networks (ANN). The elaborated numerical model of faulty machine consists of field, circuit and motion equations. Voltage excited supply allowed to determine the torque waveform during start-up. The inter-turn short-circuit was treated as a galvanic connection between two points of the stator winding. The waveforms were calculated for different amounts of shorted-turns from 0 to 55. Due to the non-stationary waveforms a wavelet packet decomposition was used to perform an analysis of the torque. The obtained results of analysis were used as input vector for ANN. The response of the neural network was the number of shorted-turns in the stator winding. Special attention was paid to compare response of general regression neural network (GRNN) and multi-layer perceptron neural network (MLP). Based on the results of the research, the efficiency of the developed algorithm can be inferred.

Evaluation of a hybrid anaerobic biofilm reactor treating winery effluents and using grape stalks as biofilm carrier.

PubMed

Wahab, Mohamed Ali; Habouzit, Frédéric; Bernet, Nicolas; Jedidi, Naceur; Escudié, Renaud

2016-01-01

Wine production processes generate large amount of both winery wastewater and solid wastes. Furthermore, working periods, volumes and pollution loads greatly vary over the year. Therefore, it is recommended to develop a low-cost treatment technology for the treatment of winery effluents taking into account the variation of the organic loading rate (OLR). Accordingly, we have investigated the sequential operation of an anaerobic biofilm reactor treating winery effluents and using grape stalks (GSs) as biofilm carrier with an OLR ranging from 0.65 to 27 gCOD/L/d. The result showed that, during the start-up with wastewater influent, the chemical oxygen demand (COD) removal rate ranged from 83% to 93% and was about 91% at the end of the start-up period that lasted for 40 days. After 3 months of inactivity period of the reactor (no influent feeding), we have succeeded in restarting-up the reactor in only 15 days with a COD removal of 82% and a low concentration of volatile fatty acids (1 g/L), which confirms the robustness of the reactor. As a consequence, GSs can be used as an efficient carrier support, allowing a fast reactor start-up, while the biofilm conserves its activity during a non-feeding period. The proposed hybrid reactor thus permits to treat both winery effluents and GSs.

Physics Bachelors: Initial Employment. Data from the Degree Recipient Follow-Up Survey for the Classes of 2013 and 2014. Focus On

ERIC Educational Resources Information Center

Mulvey, Patrick; Pold, Jack

2017-01-01

New physics bachelors entering the workforce receive some of the highest starting salaries of any undergraduate majors. Bachelors accepting STEM (science, technology, engineering, mathematics) positions in the private sector had a median starting salary of $55,000. Physics bachelors from 2013 and 2014 were contacted in the winter following the…

Marketing for the photonics industry

NASA Astrophysics Data System (ADS)

d'Humières, Benoît

2018-04-01

You create a start-up, diversify the business of your SME, expand your product range; every new activity, every new business, starts with a concept. You, your partners, your team, have an idea for a product. Your dream product will be better and cheaper or it might not even exist yet, but it will meet market requirements. You are going to make this concept a reality.

Dr. Dan Arvizu Keynote Presentation Text Version | NREL

Science.gov Websites

stakeholders, investors, cleantech start-ups, all looking to network, get to know one another, find avenues for 2010, attending the forum and really getting more acquainted with this ecosystem. The one-on-one networking session kicks off the event and it's primarily three hours of one-on-one meetings between start

Head Start and Urban Children's School Readiness: A Birth Cohort Study in 18 Cities

ERIC Educational Resources Information Center

Zhai, Fuhua; Brooks-Gunn, Jeanne; Waldfogel, Jane

2010-01-01

In this study, the authors used data from a large longitudinal birth cohort study of primarily low-income children in urban areas, the Fragile Families and Child Wellbeing Study (FFCWS), to investigate the effects of Head Start participation on children's school readiness. The fact that their sample was mainly made up of disadvantaged families…

Preschool Preposition Test and Classroom Behavior Description: Eighth Grade Follow-Up of Head Start Program.

ERIC Educational Resources Information Center

Aaronson, May; And Others

Head Start children tested at 4 years of age on the Preschool Preposition Test (PPT) and the Classroom Behavior Description checklist (CBD) were assessed for academic achievement and scholastic aptitude at the third- and eighth-grade levels. The PPT is a receptive language test which examines the comprehension of verbal directions by using spatial…

Starting Solids: A Guide for Parents and Child Care Providers.

ERIC Educational Resources Information Center

National Association of Pediatric Nurse Associates and Practitioners, Cherry Hill, NJ.

Most infants consume only breast milk or infant formula for the first 4 months, as their digestive systems and jaw and throat muscles are not ready for solid foods. Most healthcare professionals advise starting solid foods between 4 and 6 months of age, when infants can hold their heads up straight when sitting. The first solid food should be…

Learning from Sure Start: Working with Young Children and Their Families

ERIC Educational Resources Information Center

Weinberger, Jo, Ed.; Pickstone, Caroline, Ed.; Hannon, Peter, Ed.

2005-01-01

The book comes out of a University research project that has worked closely with one local programme over five years from its beginning. Sure Start is a national government initiative that targets families with children aged up to the age of four in areas of social and economic disadvantage, to promote development so children are ready to thrive…

Incredible Years Parent Training Support for Nursery Staff Working within a Disadvantaged Flying Start Area in Wales: A Feasibility Study

ERIC Educational Resources Information Center

Bywater, Tracey Jane; Hutchings, Judith Mary; Gridley, Nicole; Jones, Karen

2011-01-01

Parenting programmes are effective interventions for preventing and treating conduct problems in young children. Up to 20% of children in disadvantaged areas have conduct disorder. Recent government initiatives such as targeting early years services to designated disadvantaged Flying Start areas in Wales have resulted in increased nursery-care…

How To Start a Family Day Care = Como Iniciar una Guarderia en El Hogar. [Videotape and Viewer's Guide].

ERIC Educational Resources Information Center

Raphael, Doris; Weisman, Douglas

Being a family day care provider is work that requires professional responsibilities and attention to the physical, emotional, and educational well-being of children; listening and responding to parents; and running a business. This videotape, in English- and Spanish-language versions, explores the elements involved in starting up a family day…

Start-up of a multi-stage system for biogas production and solid waste treatment in low-tech countries.

PubMed

Biey, E M; Musibono, E D; Verstraete, W

2003-01-01

Vegetable fruit garden wastes were treated anaerobically using a multistage Dranco system. The digesters were composed of three 50 L vessels kept in mesophilic conditions. They were operating at 14.5-17% TS. By controlling the pH in the system, the start-up for biogas production was shortened to 60 days. The pH correction was a buffering which enhanced methanogenic activity in the digesters. With a loading rate of 4.1 kg VS/m3 reactor/day, the production of biogas was 5 m3/m3 reactor/ day, and 60-70% methane content. This allowed making a multisystem by starting every 3 weeks with new vessels in order to maintain biogas production, to be used in industries or in local communities in low-tech countries. The designed model was started in Kinshasa (Congo) where a project is expected to treat one ton of solid waste on a daily basis, for a production of 100 m3 biogas. This cost effectiveness of the system is demonstrated and presents the opportunity for biowaste treatment coupled with environmental protection and substantial energy recovery.

In-Game Heart Rate Responses Among Professional Baseball Starting Pitchers.

PubMed

Cornell, David J; Paxson, Jeffrey L; Caplinger, Roger A; Seligman, Joshua R; Davis, Nicholas A; Flees, Robert J; Ebersole, Kyle T

2017-01-01

Cornell, DJ, Paxson, JL, Caplinger, RA, Seligman, JR, Davis, NA, Flees, RJ, and Ebersole, KT. In-game heart rate responses among professional baseball starting pitchers. J Strength Cond Res 31(1): 24-29, 2017-The purpose of the current study was to characterize the in-game heart rate (HR) responses of baseball pitching. In-game HR was recorded from 16 professional baseball starting pitchers (mean ± SD, age = 22.1 ± 1.3 years; height = 187.9 ± 4.4 cm; weight = 90.5 ± 9.5 kg) for a total of 682 innings (home = 381, away = 301). All analyzed HR data were then normalized to each pitcher's age-predicted maximal HR (%HRmax). The group mean ± SD in-game %HRmax among all pitchers was 84.8 ± 3.9%, suggesting that baseball pitching is predominantly an anaerobic task. A split-plot mixed-model repeated measures analysis of variance identified a significant interaction effect between inning and game location (p = 0.042). Follow-up simple effects indicated that the in-game %HRmax was significantly different across innings, but only during home starts (p < 0.001). Specifically, pairwise analyses indicated that the in-game %HRmax during home starts were significantly (p ≤ 0.05) higher in the first and second innings than in all other innings. In addition, follow-up simple effects indicated that the in-game %HRmax was significantly (p = 0.017) higher during home starts than away starts in the first inning (87.3 ± 3.6% vs. 85.8 vs. 3.8%, respectively). Thus, it is possible that inning-dependent psychological factors may have contributed to the observed changes in in-game physiological intensity across innings and that these factors are specific to game location. Consequently, strength and conditioning practitioners should prescribe high-intensity exercises when developing conditioning programs for professional baseball starting pitchers.

Dismantling of the 904 Cell at the HAO/Sud Facility - 13466

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaudey, C.E.; Crosnier, S.; Renouf, M.

2013-07-01

La Hague facility, in France, is the spent fuel recycling plant wherein a part of the fuel coming from some of the French, German, Belgian, Swiss, Dutch and Japanese nuclear reactors is reprocessed before being recycled in order to separate certain radioactive elements. The facility has been successively handled by the CEA (1962-1978), Cogema (1978-2006), and AREVA NC (since 2006). La Hague facility is composed of 3 production units: The UP2-400 production unit started to be operated in 1966 for the reprocessing of UNGG metal fuel. In 1976, following the dropout of the graphite-gas technology by EDF, an HAO workshopmore » to reprocess the fuel from the light water reactors is affiliated and then stopped in 2003. - UP2-400 is partially stopped in 2002 and then definitely the 1 January 2004 and is being dismantled - UP2-800, with the same capacity than UP3, started to be operated in 1994 and is still in operation. And UP3 - UP3 was implemented in 1990 with an annual reprocessing capacity of 800 tons of fuel and is still in operation The combined licensed capacity of UP2-800 and UP3 is 1,700 tons of used fuel. (authors)« less

Flight Testing of the Capillary Pumped Loop 3 Experiment

NASA Technical Reports Server (NTRS)

Ottenstein, Laura; Butler, Dan; Ku, Jentung; Cheung, Kwok; Baldauff, Robert; Hoang, Triem

2002-01-01

The Capillary Pumped Loop 3 (CAPL 3) experiment was a multiple evaporator capillary pumped loop experiment that flew in the Space Shuttle payload bay in December 2001 (STS-108). The main objective of CAPL 3 was to demonstrate in micro-gravity a multiple evaporator capillary pumped loop system, capable of reliable start-up, reliable continuous operation, and heat load sharing, with hardware for a deployable radiator. Tests performed on orbit included start-ups, power cycles, low power tests (100 W total), high power tests (up to 1447 W total), heat load sharing, variable/fixed conductance transition tests, and saturation temperature change tests. The majority of the tests were completed successfully, although the experiment did exhibit an unexpected sensitivity to shuttle maneuvers. This paper describes the experiment, the tests performed during the mission, and the test results.

NASA "Rocks" Problem-Based Learning

ERIC Educational Resources Information Center

Johnson, Carla J.

2004-01-01

A rock investigation set up as a problem-based learning mini-unit for the author's seventh grade integrated science students. To start this unit, she explains to students that NASA has sent us a container of rocks that they would like to have identified. It is up to the students to assume the role of geologists and come up with some way to…

Increased urinary excretion of thioether in new rubber workers

PubMed Central

Kilpikari, I; Savolainen, H

1982-01-01

ABSTRACT Urinary excretion of thioether before starting work and in the early work period in a rubber factory was measured in urine samples collected after one, two to four, and five or more months of starting work. The study population consisted of 84 new workers. The urinary excretion of thioether decreased after one month's exposure and increased thereafter up to five months. Measurement of urinary thioethers in groups of new workers is therefore informative of exposure to alkylating agents only after several months from starting work. This effect may be mediated by the induction of the pertinent metabolic pathway. PMID:7138800

Prize for Industrial Applications of Physics Talk: Start-up Company (Ad)Ventures -- the Highs & Lows

NASA Astrophysics Data System (ADS)

Economou, Nicholas

2011-03-01

Each start-up company is a unique enterprise, with its own strengths, weaknesses, challenges and eventual outcome. However, there are many aspects common to all new technology companies, including the need for: 1. An innovative technology edge. 2. A solid product idea. 3. A team with experienced people in at least some of the key jobs. 4. Adequate initial funding to achieve some significant milestones. 5. Patient investors who can persevere through the inevitable hard times. 6. A liquidity/exit strategy clearly articulated from day one. The case studies of how other companies were started and developed can provide useful insights into what may lie ahead for the founders of a new company. Several examples from my own experience will be discussed. While they are all clearly different, there are common threads running through all of these stories. Some thoughts on what went right or wrong, and what could have been done better will be presented.

Combat Fitness a Concept Vital to National Defense

DTIC Science & Technology

2010-06-18

Physical fitness testing has traditionally been focused on a 1.5- to 3-mile run, push-ups, sit-ups, and, in some Services pull -ups, flexibility, and...Performance 6 Shoot Physical Requirements Employ hand grenades Run under load, jump, bound, high/low crawl, climb, push, pull , squat, lunge, roll...jump, bound, high/low crawl, climb, push, pull , squat, lunge, roll, stop, start, change direction and get up/down. Navigate from one point to

DNN Expert Profile: Meet the NGFP Class of 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brim, Cornelia P.; Disney, Maren V.

2015-11-02

After their first month on the job, we caught up with several NNSA Graduate Fellowship Program (NGFP) Fellows assigned to DNN. We learned more about their career interests and life experiences and what they have been up to in their fellowships, which started in June 2015.

Development of an advanced Sabatier CO2 reduction subsystem

NASA Technical Reports Server (NTRS)

Kleiner, G. N.; Cusick, R. J.

1981-01-01

A preprototype Sabatier CO2 reduction subsystem was successfully designed, fabricated and tested. The lightweight, quick starting (less than 5 minutes) reactor utlizes a highly active and physically durable methanation catalyst composed of ruthenium on alumina. The use of this improved catalyst permits a simple, passively controlled reactor design with an average lean component H2/CO2 conversion efficiency of over 99% over a range of H2/CO2 molar ratios of 1.8 to 5 while operating with process flows equivalent to a crew size of up to five persons. The subsystem requires no heater operation after start-up even during simulated 55 minute lightside/39 minute darkside orbital operation.

Empirical topological investigation of practical supply chains based on complex networks

NASA Astrophysics Data System (ADS)

Liao, Hao; Shen, Jing; Wu, Xing-Tong; Chen, Bo-Kui; Zhou, Mingyang

2017-10-01

Not Available Project supported by the National Natural Science Foundation of China (Grant Nos. 11547040 and 61703281), Guangdong Province Natural Science Foundation, China (Grant Nos. 2016A030310051 and 2015KONCX143), Shenzhen Fundamental Research Foundation, China (Grant Nos. JCYJ20150625101524056 and JCYJ20160520162743717), SZU Student Innovation Fund, China, the PhD Start-up Fund of Natural Science Foundation of Guangdong Province, China (Grant No. 2017A030310374), the Young Teachers Start-up Fund of Natural Science Foundation of Shenzhen University, China, the Natural Science Foundation of SZU, China (Grant No. 2016-24), and the Singapore Ministry of Education Academic Research Fund Tier 2 (Grant No. MOE 2013-T2-2-033).

Motor run-up system. [power lines

NASA Technical Reports Server (NTRS)

Daeges, J. J. (Inventor)

1975-01-01

A starting system is described for bringing a large synchronous motor up to speed to prevent large power line disturbances at the moment the motor is connected to the power line. The system includes (1) a digital counter which generates a count determined by the difference in frequency between the power line and a small current generated by the synchronous motor; (2) a latch which stores the count; and (3) a comparator which compares the stored count with a newly generated count to determine whether the synchronous motor is accelerating or decelerating. Signals generated by the counter and comparator control the current to a clutch that couples a starting motor to the large synchronous motor.

A test for the fainthearted.

PubMed

Kuemmerle, Walter

2002-05-01

Just a few years ago, becoming an entrepreneur was pretty simple. All you needed was some idea--any idea--a little experience, and venture capital funds to get you going. Many young people started to believe that entrepreneurship was a viable, even safe, career choice. Older folks, too, underestimated the risks of financing start-ups, and, as a result, they ended up throwing millions of dollars into doomed ventures. The economic downturn has laid waste to those illusions. So now is a good time to ask potential entrepreneurs and their financial backers the hard questions unheeded in the days of the Internet boom: What makes an entrepreneur? What characteristics set successful entrepreneurs apart, enabling them to keep their company alive even when the going gets tough? This article addresses those questions, reminding us that becoming a successful entrepreneur is decidedly not a squeaky-clean affair; you may end up making powerful enemies, risking your own financial security, or even, in extreme cases, looking at jail time. Specifically, the article explores the key qualities that make someone a successful entrepreneur. Walter Kuemmerle has distilled these characteristics into a kind of litmus test of the following five straightforward, albeit disquieting, questions you should ask yourself if you are considering starting your own venture: Are you comfortable stretching the rules? Are you prepared to make powerful enemies? Do you have the patience to start small? Are you willing to shift strategies quickly? Are you a closer? Answering these questions honestly will help you decide if you have what it takes to become an entrepreneur.

CwicStart - a proof-of-concept client for the CEOSWGISS Integrated Catalog (CWIC)

NASA Astrophysics Data System (ADS)

Newman, D. J.; Mitchell, A. E.

2012-12-01

Keywords - Earth Science, data discovery, agile development, ruby on rails, catalog, OGC Audience - Earth Science application developers What is CwicStart CwicStart is a prototypical earth science data discovery web application designed, developed and hosted by NASA's Earth Observing System (EOS) Clearinghouse (ECHO). CwicStart searches the CEOS WGISS Integrated Catalog (CWIC) to provide users with dataset and granule level metadata from sources as diverse as NASA, NOAA, INPE and AOE. CwicStart demonstrates the ease of which it is possible to stand up a functioning client against the CWIC. From start to finish, CwicStart was designed, developed and deployed in one month. Built from OGC getCapabilities document of CWIC The CwicStart application takes the OGC getCapabilities (http://www.opengeospatial.org/standards/is) document describing CWIC, as it's starting point for providing a user interface suitable for interrogating CWIC. Consequently, it can allow the user to constrain their search by the following criteria, - Generic search terms - Spatial bounding box - Start date/time and end date/time - ISO-queryable key-value pairs User Interface inspired by Reverb ECHO's state-of-the-art earth science discovery tool, Reverb (http://reverb.echo.nasa.gov) was used as a guideline for the user interface components of CwicStart. It incorporates OpenLayers to provide point-and-click spatial constraint specification and calendar input for temporal constraints. Discovery involves two phases: dataset discovery and granule discovery with full pagination support for large results sets. CwicStart supports 'graceful degradation' of support for multiple browsers and accessibility requirements. Implemented in Ruby on Rails for Agile Development CwicStart is implemented in Ruby on Rails, a dynamic, rapid development language and environment that facilitates Agile development and is resilient to changing requirements. Using an Agile development methodology ECHO was able to stand up the first iteration of CwicStart in an iteration lasting only one week. Three subsequent week-long iterations delivered the current functionality. CwicStart can be found at the following location, https://testbed.echo.nasa.gov/cwic-start/ About CWIC The WGISS team provides an application, the CEOS WGISS Integrated Catalog (CWIC) with the following capabilities. - Provide an access point for major CEOS agency catalog systems. - Interface to user interface clients by using the GEO standards. - Send directory/collection searches to the International Directory Network. - Distribute inventory/product searches to the CEOS agency inventory systems using the agency systems native protocol. - Offered as the CEOS community catalog as part of the GEO common infrastructure. CWIC Partners - Committee on Earth Observing Satellites (CEOS) - International Directory Network (IDN) - U.S. National Aeronautics and Space (NASA) - Earth Observing System (EOS) Clearinghouse (ECHO) - U.S. National Oceanographic and Atmospheric Administration (NOAA) - Comprehensive Large Array Data Stewardship System (CLASS) - U.S. Geological Survey (USGS) - Landsat Catalog System - U.S. Geological Survey (USGS) - LSI Portal - National Institute for Space Research (INPE), Brazil - Academy of Opto-Electronics (AOE), Chinese Academy of Sciences (CAS)

Bootstrapping the energy flow in the beginning of life.

PubMed

Hengeveld, R; Fedonkin, M A

2007-01-01

This paper suggests that the energy flow on which all living structures depend only started up slowly, the low-energy, initial phase starting up a second, slightly more energetic phase, and so on. In this way, the build up of the energy flow follows a bootstrapping process similar to that found in the development of computers, the first generation making possible the calculations necessary for constructing the second one, etc. In the biogenetic upstart of an energy flow, non-metals in the lower periods of the Periodic Table of Elements would have constituted the most primitive systems, their operation being enhanced and later supplanted by elements in the higher periods that demand more energy. This bootstrapping process would put the development of the metabolisms based on the second period elements carbon, nitrogen and oxygen at the end of the evolutionary process rather than at, or even before, the biogenetic event.

Feasibility Study of Jupiter Icy Moons Orbiter Permanent Magnet Alternator Start Sequence

NASA Technical Reports Server (NTRS)

Kenny, Barbara H.; Tokars, Roger P.

2006-01-01

The Jupiter Icy Moons Orbiter (JIMO) mission was a proposed, (recently cancelled) long duration science mission to study three moons of Jupiter: Callisto, Ganymede, and Europa. One design of the JIMO spacecraft used a nuclear heat source in conjunction with a Brayton rotating machine to generate electrical power for the electric thrusters and the spacecraft bus. The basic operation of the closed cycle Brayton system was as follows. The working fluid, a heliumxenon gas mixture, first entered a compressor, then went through a recuperator and hot-side heat exchanger, then expanded across a turbine that drove an alternator, then entered the cold-side of the recuperator and heat exchanger and finally returned to the compressor. The spacecraft was to be launched with the Brayton system off-line and the nuclear reactor shut down. Once the system was started, the helium-xenon gas would be circulated into the heat exchangers as the nuclear reactors were activated. Initially, the alternator unit would operate as a motor so as to drive the turbine and compressor to get the cycle started. This report investigated the feasibility of the start up sequence of a permanent magnet (PM) machine, similar in operation to the alternator unit, without any position or speed feedback sensors ("sensorless") and with a variable load torque. It is found that the permanent magnet machine can start with sensorless control and a load torque of up to 30 percent of the rated value.

Estimated mortality of adult HIV-infected patients starting treatment with combination antiretroviral therapy

PubMed Central

Yiannoutsos, Constantin Theodore; Johnson, Leigh Francis; Boulle, Andrew; Musick, Beverly Sue; Gsponer, Thomas; Balestre, Eric; Law, Matthew; Shepherd, Bryan E; Egger, Matthias

2012-01-01

Objective To provide estimates of mortality among HIV-infected patients starting combination antiretroviral therapy. Methods We report on the death rates from 122 925 adult HIV-infected patients aged 15 years or older from East, Southern and West Africa, Asia Pacific and Latin America. We use two methods to adjust for biases in mortality estimation resulting from loss from follow-up, based on double-sampling methods applied to patient outreach (Kenya) and linkage with vital registries (South Africa), and apply these to mortality estimates in the other three regions. Age, gender and CD4 count at the initiation of therapy were the factors considered as predictors of mortality at 6, 12, 24 and >24 months after the start of treatment. Results Patient mortality was high during the first 6 months after therapy for all patient subgroups and exceeded 40 per 100 patient years among patients who started treatment at low CD4 count. This trend was seen regardless of region, demographic or disease-related risk factor. Mortality was under-reported by up to or exceeding 100% when comparing estimates obtained from passive monitoring of patient vital status. Conclusions Despite advances in antiretroviral treatment coverage many patients start treatment at very low CD4 counts and experience significant mortality during the first 6 months after treatment initiation. Active patient tracing and linkage with vital registries are critical in adjusting estimates of mortality, particularly in low- and middle-income settings. PMID:23172344

Simulation of a Start-Up Manufacturing Facility for Nanopore Arrays

ERIC Educational Resources Information Center

Field, Dennis W.

2009-01-01

Simulation is a powerful tool in developing and troubleshooting manufacturing processes, particularly when considering process flows for manufacturing systems that do not yet exist. Simulation can bridge the gap in terms of setting up full-scale manufacturing for nanotechnology products if limited production experience is an issue. An effective…

For Whom Is College Being Reinvented?

ERIC Educational Resources Information Center

Carlson, Scott; Blumenstyk, Goldie

2012-01-01

Last year, leading lights in for-profit and nonprofit higher education convened in Washington for a conference on private-sector innovation in the industry. The national conversation about dysfunction and disruption in higher education was just heating up, and panelists from start-ups, banking, government, and education waxed enthusiastic about…

Keeping Pace

ERIC Educational Resources Information Center

Henderson, Nancy

2008-01-01

This article describes the struggles of two tough moms who team up to start their own company. Fed up with a lack of stylish, properly-fitting shoes for their children with cerebral palsy, they established "Keeping Pace" which currently offers a selection of stylish girls' and boys' athletic sneakers and casual dress shoes for boys, all sold…

The Bridging Allowance as an Instrument of Labour Market Policy--A Provisional Appraisal. IAB Labour Market Research Topics No. 30.

ERIC Educational Resources Information Center

Wiessner, Frank

Since 1986 the Federal Employment Service in Germany has used the so-called "bridging allowance" to assist previously unemployed people in setting up their own businesses. This allowance is intended to guarantee the social security and subsistence of the person setting up the business during the start-up phase, until the young enterprise…

New Strategy for a Suitable Fast Stabilization of the Biomethanization Performance

PubMed Central

Fernández-Güelfo, L. A.; Álvarez-Gallego, C. J.; Sales Márquez, D.; Romero García, L. I.

2012-01-01

The start-up strategies for thermophilic anaerobic reactors usually consist of an initial mesophilic stage (35°C), with an approximate duration of 185 days, and a subsequent thermophilic stage (55°C), which normally requires around 60 days to achieve the system stabilizatio. During the first 8–10 days of the mesophilic stage, the reactor is not fed so that the inoculum, which is generally a mesophilic anaerobic sludge, may be adapted to the organic solid waste. Between mesophilic and thermophilic conditions the reactor is still not fed in an effort to prevent possible imbalances in the proces. As a consequence, the start-up and stabilization of the biomethanization performance described in the literature require, at least, around 245 days. In this sense, a new strategy for the start-up and stabilization phases is presented in this study. This approach allows an important reduction in the overall time necessary for these stages in an anaerobic continuous stirred tank reactor (CSTR) operated at thermophilic-dry conditions for treating the organic fraction of the municipal solid waste (OFMSW): 60 days versus 245 days of conventional strategies. The new strategy uses modified SEBAC technology to adapt an inoculum to the OFMSW and the operational conditions prior to seeding the CSTR. PMID:23193374

Research on the response characteristics of solenoid valve of the air-jet loom by simulation

NASA Astrophysics Data System (ADS)

Jin, Yuzhen; Deng, Ruoyu; Jin, Yingzi; Hu, Xudong

2013-12-01

Solenoid valve is one of the executive parts of weft insertion control system. According to the response characteristics of the solenoid valve, an improved design becomes a necessity. Firstly, the numerical model was established after analyzing the solenoid valve during its start-up and shut-down. Comparing the simulation data with the practical data, it is verified that the numerical simulation model has a high feasibility. Secondly, excitation voltage and spring pre-compression were adjusted respectively, and the response rules after adjusting were investigated. The research of the study shows: the response time tends to be inverse proportional to the excitation voltage during start-up, and it becomes a constant value with the increase of the excitation voltage; the response time is proportional to the spring pre-compression when the solenoid valve starts up, it is inverse proportional to spring pre-compression when the solenoid valve shuts down. And the total response time is a constant value with the increase of the spring pre-compression. Therefore, the value of the excitation voltage and the spring pre-compression should be selected when the curve is becoming flatten. The results of the research can provide the reference to the further development of the solenoid valve.

Time required to initiate outbreak and pandemic observational research.

PubMed

Rishu, Asgar H; Marinoff, Nicole; Julien, Lisa; Dumitrascu, Mariana; Marten, Nicole; Eggertson, Shauna; Willems, Su; Ruddell, Stacy; Lane, Dan; Light, Bruce; Stelfox, Henry T; Jouvet, Philippe; Hall, Richard; Reynolds, Steven; Daneman, Nick; Fowler, Robert A

2017-08-01

Observational research focused upon emerging infectious diseases such as Ebola virus, Middle East respiratory syndrome, and Zika virus has been challenging to quickly initiate. We aimed to determine the duration of start-up procedures and barriers encountered for an observational study focused upon such infectious outbreaks. At 1 pediatric and 5 adult intensive care units, we measured durations from protocol receipt to a variety of outbreak research milestones, including research ethics board (REB) approval, data sharing agreement (DSA) execution, and patient study screening initiation. The median (interquartile range) time from site receipt of the protocol to REB submission was 73 (30-126) days; to REB approval, 158 (42-188) days; to DSA completion, 276 (186-312) days; and to study screening initiation, 293 (269-391) days. The median time from REB submission to REB approval was 43 (13-85) days. The median time for all start-up procedures was 335 (188-335) days. There is a lengthy start-up period required for outbreak-focused research. Completing DSAs was the most time-consuming step. A reactive approach to newly emerging threats such as Ebola virus, Middle East respiratory syndrome, and Zika virus will likely not allow sufficient time to initiate research before most outbreaks are advanced. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Fractal dimension and fuzzy logic systems for broken rotor bar detection in induction motors at start-up and steady-state regimes

NASA Astrophysics Data System (ADS)

Amezquita-Sanchez, Juan P.; Valtierra-Rodriguez, Martin; Perez-Ramirez, Carlos A.; Camarena-Martinez, David; Garcia-Perez, Arturo; Romero-Troncoso, Rene J.

2017-07-01

Squirrel-cage induction motors (SCIMs) are key machines in many industrial applications. In this regard, the monitoring of their operating condition aiming at avoiding damage and reducing economical losses has become a demanding task for industry. In the literature, several techniques and methodologies to detect faults that affect the integrity and performance of SCIMs have been proposed. However, they have only been focused on analyzing either the start-up transient or the steady-state operation regimes, two common operating scenarios in real practice. In this work, a novel methodology for broken rotor bar (BRB) detection in SCIMs during both start-up and steady-state operation regimes is proposed. It consists of two main steps. In the first one, the analysis of three-axis vibration signals using fractal dimension (FD) theory is carried out. Since different FD-based algorithms can give different results, three algorithms named Katz’ FD, Higuchi’s FD, and box dimension, are tested. In the second step, a fuzzy logic system for each regime is presented for automatic diagnosis. To validate the proposal, a motor with different damage levels has been tested: one with a partially BRB, a second with one fully BRB, and the third with two BRBs. The obtained results demonstrate the proposed effectiveness.

Steam stripping of the unsaturated zone of contaminated sub-soils: The effect of diffusion/dispersion in the start-up phase

NASA Astrophysics Data System (ADS)

Brouwers, H. J. H.; Gilding, B. H.

2006-02-01

The unsteady process of steam stripping of the unsaturated zone of soils contaminated with volatile organic compounds (VOCs) is addressed. A model is presented. It accounts for the effects of water and contaminants remaining in vapour phase, as well as diffusion and dispersion of contaminants in this phase. The model has two components. The first is a one-dimensional description of the propagation of a steam front in the start-up phase. This is based on Darcy's law and conservation laws of mass and energy. The second component describes the transport of volatile contaminants. Taking the view that non-equilibrium between liquid and vapour phases exists, it accounts for evaporation, transport, and condensation at the front. This leads to a moving-boundary problem. The moving-boundary problem is brought into a fixed domain by a suitable transformation of the governing partial differential equations, and solved numerically. For a broad range of the governing dimensionless numbers, such as the Henry, Merkel and Péclet numbers, computational results are discussed. A mathematical asymptotic analysis supports this discussion. The range of parameter values for which the model is valid is investigated. Diffusion and dispersion are shown to be of qualitative importance, but to have little quantitative effect in the start-up phase.

Comparing shut-down strategies for proton exchange membrane fuel cells

NASA Astrophysics Data System (ADS)

Oyarce, Alejandro; Zakrisson, Erik; Ivity, Matthew; Lagergren, Carina; Ofstad, Axel Baumann; Bodén, Andreas; Lindbergh, Göran

2014-05-01

Application of system strategies for mitigating carbon corrosion of the catalyst support in proton exchange fuel cells (PEMFCs) is a requirement for PEMFC systems, especially in the case of systems for transport application undergoing thousands of start-ups and shut-downs (SU/SD) during its lifetime. This study compares several of the most common shut-down strategies for 1100 cycles SU/SD cycles at 70 °C and 80% RH using commercially available fuel cell components. Each cycle simulates a prolonged shut-down, i.e. finishing each cycle with air filled anode and cathode. Furthermore, all start-ups are unprotected, i.e. introducing the H2 rich gas into an air filled anode. Finally, each cycle also includes normal fuel cell operation at 0.5 A cm-2 using synthetic reformate/air. H2 purge of the cathode and O2 consumption using a load were found to be the most effective strategies. The degradation rate using the H2 purge strategy was 23 μV cycle-1 at 0.86 A cm-2 using H2 and air at the anode and cathode, respectively. This degradation rate may be regarded as a generally low value, especially considering that this value also includes the degradation rate caused by unprotected start-ups.

Large U.S. liquids plant starts up

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milios, P.B.; Harris, R.A.

1997-05-12

Operation began in 1996 on the new Chaco liquids-extraction plant in northwest New Mexico. The plant`s extraction capacity--50,000 b/d of NGLs from 600 MMcfd of gas--exceeds that of any other turboexpander plant in the lower 48 states. Regulatory reform made the project possible, and significant regulatory, economic, environmental, technical, and logistic challenges were overcome to achieve plant start-up. Operator El Paso Field Services, Houston, believes the new Chaco plant creates added value when compared to the lean-oil extraction plant which El Paso had operated at the San Juan basin site since the 1950s. Success of the project was based, inmore » part, on the following: creation of a free-market company by the spin-down of El Paso Field Services (EPFS) from El Paso Natural Gas (EPNG); establishment of agreements with producers behind the plant to share the benefits generated by the plant in exchange for acreage dedication; negotiation of an agreement with Mid-America Pipeline Co. to expand its pipeline system to receive and deliver to market liquids from the new plant; and selection of ABB Randall which committed to engineer, procure for, and construct the plant at a cost which provided an adequate rate of return. These four issues are discussed. Construction and start-up are described.« less

Ozone impact minimization through coordinated scheduling of turnaround operations from multiple olefin plants in an ozone nonattainment area

NASA Astrophysics Data System (ADS)

Ge, Sijie; Wang, Sujing; Xu, Qiang; Ho, Thomas

2018-03-01

Turnaround operations (start-up and shutdown) are critical operations in olefin plants, which emit large quantities of VOCs, NOx and CO. The emission has great potentials to impact the ozone level in ozone nonattainment areas. This study demonstrates a novel practice to minimize the ozone impact through coordinated scheduling of turnaround operations from multiple olefin plants located in Houston, Texas, an ozone nonattainment area. The study considered two olefin plants scheduled to conduct turnaround operations: one start-up and one shutdown, simultaneously on the same day within a five-hour window. Through dynamic simulations of the turnaround operations using ASPEN Plus Dynamics and air quality simulations using CAMx, the study predicts the ozone impact from the combined effect of the two turnaround operations under different starting-time scenarios. The simulations predict that the ozone impact from planned turnaround operations ranges from a maximum of 11.4 ppb to a minimum of 1.4 ppb. Hence, a reduction of up to 10.0 ppb can be achieved on a single day based on the selected two simulation days. This study demonstrates a cost-effective and environmentally benign ozone control practice for relevant stakeholders, including environmental agencies, regional plant operators, and local communities.

Start-up of a pilot-scale anaerobic fixed film reactor at low temperature treating slaughterhouse wastewater.

PubMed

del Pozo, R; Diez, V; Salazar, G

2002-01-01

A pilot-scale anaerobic fixed film reactor (AFFR) with vertically arranged PVC tubes as biomass carrier, treating poultry slaughterhouse wastewater was started-up in 74 days at temperatures between 20-24 degrees C. The start-up process consisted of a long acclimatization phase followed by a low loaded growth phase, a gradual increase of OLR upto 9.2 kg COD/m3d, and a final maturation phase at moderated loads of 2.7 kg COD/m3d at which total COD removal efficiencies of 57% were achieved. Alkalinity ratio IA:PA was found to be the best control parameter to avoid VFA accumulation. OLR increase based on pH control was not satisfactory because changes in CO2 solubility caused daily by temperature and flow variations led to pH oscillations of 0.2 units. The low wastewater alkalinity, 260 mg/l CaCO3 was insufficient to buffer the pH system, therefore the pH decrease associated with the VFA accumulation was not easily detected and could not be used as a way of OLR control. Organic matter removal took place by accumulation and biodegradation processes. Limitation in the reactor hydrodynamics and particulate fraction hydrolysis was detected at high flow rates.

Mortality According to CD4 Count at Start of Combination Antiretroviral Therapy Among HIV-infected Patients Followed for up to 15 Years After Start of Treatment: Collaborative Cohort Study

PubMed Central

May, Margaret T.; Vehreschild, Jorg-Janne; Trickey, Adam; Obel, Niels; Reiss, Peter; Bonnet, Fabrice; Mary-Krause, Murielle; Samji, Hasina; Cavassini, Matthias; Gill, Michael John; Shepherd, Leah C.; Crane, Heidi M.; d'Arminio Monforte, Antonella; Burkholder, Greer A.; Johnson, Margaret M.; Sobrino-Vegas, Paz; Domingo, Pere; Zangerle, Robert; Justice, Amy C.; Sterling, Timothy R.; Miró, José M.; Sterne, Jonathan A. C.

2016-01-01

Background. CD4 count at start of combination antiretroviral therapy (ART) is strongly associated with short-term survival, but its association with longer-term survival is less well characterized. Methods. We estimated mortality rates (MRs) by time since start of ART (<0.5, 0.5–0.9, 1–2.9, 3–4.9, 5–9.9, and ≥10 years) among patients from 18 European and North American cohorts who started ART during 1996–2001. Piecewise exponential models stratified by cohort were used to estimate crude and adjusted (for sex, age, transmission risk, period of starting ART [1996–1997, 1998–1999, 2000–2001], and AIDS and human immunodeficiency virus type 1 RNA at baseline) mortality rate ratios (MRRs) by CD4 count at start of ART (0–49, 50–99, 100–199, 200–349, 350–499, ≥500 cells/µL) overall and separately according to time since start of ART. Results. A total of 6344 of 37 496 patients died during 359 219 years of follow-up. The MR per 1000 person-years was 32.8 (95% confidence interval [CI], 30.2–35.5) during the first 6 months, declining to 16.0 (95% CI, 15.4–16.8) during 5–9.9 years and 14.2 (95% CI, 13.3–15.1) after 10 years’ duration of ART. During the first year of ART, there was a strong inverse association of CD4 count at start of ART with mortality. This diminished over the next 4 years. The adjusted MRR per CD4 group was 0.97 (95% CI, .94–1.00; P = .054) and 1.02 (95% CI, .98–1.07; P = .32) among patients followed for 5–9.9 and ≥10 years, respectively. Conclusions. After surviving 5 years of ART, the mortality of patients who started ART with low baseline CD4 count converged with mortality of patients with intermediate and high baseline CD4 counts. PMID:27025828

Potentially inappropriate prescribing according to STOPP and START and adverse outcomes in community‐dwelling older people: a prospective cohort study

PubMed Central

Bennett, Kathleen; Cahir, Caitriona; Kenny, Rose Anne; Fahey, Tom

2016-01-01

Aims This study aims to determine if potentially inappropriate prescribing (PIP) is associated with increased healthcare utilization, functional decline and reduced quality of life (QoL) in a community‐dwelling older cohort. Method This prospective cohort study included participants aged ≥65 years from The Irish Longitudinal Study on Ageing (TILDA) with linked administrative pharmacy claims data who were followed up after 2 years. PIP was defined by the Screening Tool for Older Persons Prescriptions (STOPP) and Screening Tool to Alert doctors to Right Treatment (START). The association with number of emergency department (ED) visits and GP visits reported over 12 months was analyzed using multivariate negative binomial regression adjusting for confounders. Marginal structural models investigated the presence of time‐dependent confounding. Results Of participants followed up (n = 1753), PIP was detected in 57% by STOPP and 41.8% by START, 21.7% reported an ED visit and 96.1% visited a GP (median 4, IQR 2.5–6). Those with any STOPP criterion had higher rates of ED visits (adjusted incident rate ratio (IRR) 1.30, 95% confidence interval (CI) 1.02, 1.66) and GP visits (IRR 1.15, 95%CI 1.06, 1.24). Patients with two or more START criteria had significantly more ED visits (IRR 1.45, 95%CI 1.03, 2.04) and GP visits (IRR 1.13, 95%CI 1.01, 1.27) than people with no criteria. Adjusting for time‐dependent confounding did not affect the findings. Conclusions Both STOPP and START were independently associated with increased healthcare utilization and START was also related to functional decline and QoL. Optimizing prescribing to reduce PIP may provide an improvement in patient outcomes. PMID:27136457

Analysis of space reactor system components: Investigation through simulation and non-nuclear testing

NASA Astrophysics Data System (ADS)

Bragg-Sitton, Shannon M.

The use of fission energy in space power and propulsion systems offers considerable advantages over chemical propulsion. Fission provides over six orders of magnitude higher energy density, which translates to higher vehicle specific impulse and lower specific mass. These characteristics enable ambitious space exploration missions. The natural space radiation environment provides an external source of protons and high energy, high Z particles that can result in the production of secondary neutrons through interactions in reactor structures. Applying the approximate proton source in geosynchronous orbit during a solar particle event, investigation using MCNPX 2.5.b for proton transport through the SAFE-400 heat pipe cooled reactor indicates an incoming secondary neutron current of (1.16 +/- 0.03) x 107 n/s at the core-reflector interface. This neutron current may affect reactor operation during low power maneuvers (e.g., start-up) and may provide a sufficient reactor start-up source. It is important that a reactor control system be designed to automatically adjust to changes in reactor power levels, maintaining nominal operation without user intervention. A robust, autonomous control system is developed and analyzed for application during reactor start-up, accounting for fluctuations in the radiation environment that result from changes in vehicle location or to temporal variations in the radiation field. Development of a nuclear reactor for space applications requires a significant amount of testing prior to deployment of a flight unit. High confidence in fission system performance can be obtained through relatively inexpensive non-nuclear tests performed in relevant environments, with the heat from nuclear fission simulated using electric resistance heaters. A series of non-nuclear experiments was performed to characterize various aspects of reactor operation. This work includes measurement of reactor core deformation due to material thermal expansion and implementation of a virtual reactivity feedback control loop; testing and thermal hydraulic characterization of the coolant flow paths for two space reactor concepts; and analysis of heat pipe operation during start-up and steady state operation.

Does initial dosing of levothyroxine in infants with congenital hypothyroidism lead to frequent dose adjustments secondary to iatrogenic hyperthyroidism on follow-up?

PubMed

Craven, Meghan; Frank, Graeme R

2018-06-27

Congenital hypothyroidism (CH) is the most common preventable cause of intellectual disability. The recommended starting dose of levothyroxine (LT4) is between 10 and 15 μg/kg, an extremely wide range. We hypothesized that a sizable proportion of newborns treated for CH at the higher end of the dosage range become biochemically hyperthyroid at a follow-up visit. This study is a retrospective chart review of infants with CH between 2002 and 2012. Of the 104 patients included in this analysis, the average age at diagnosis was 11 days and the average starting dose of LT4 was 12±2.5 μg/kg. At follow-up, 36.5% required a dose reduction because of iatrogenic hyperthyroxinemia, 51% required no dose adjustment and 12.5% required a dose increase due to an elevated thyroid stimulating hormone (TSH). The starting doses of LT4 for those requiring a dose reduction, those not requiring an adjustment and those requiring an increase in the dose were 13.2±2.4, 11.5±2.1 and 10.3±2.6 μg/kg/day, respectively (p≤0.0001). Of the 34% of infants treated with an initial dose of >12.5 μg/day, 57.1% required a dose reduction at follow-up, compared to 26.1% of those whose initial starting dose was ≤12.5 μg/kg/day (p=0.007). Following the guidelines for initiating therapy for CH, 36.5% of the infants required a dose reduction for iatrogenic hyperthyroxinemia. These infants received a higher dose of LT4 than the infants who either required no adjustment or required an increase in the dose. A narrower range for initial dosing in CH may be appropriate.

Using low frequency and intensity ultrasound to enhance start-up and operation performance of Anammox process inoculated with the conventional sludge.

PubMed

Wang, Tao; Zhang, Diandian; Sun, Yating; Zhou, Shanshan; Li, Lin; Shao, Jingjing

2018-04-01

A lab-scale ultrasound enhancing Anammox reactor (R1) was established and irradiated once a week by ultrasound with the optimal parameter (frequency of 25 kHz, intensity of 0.2 W cm -2 and exposure time of 3 min) obtained by batch experiments. R1 and the controlled Anammox reactor (R2) without exposure to the ultrasound were operated in parallel. The start-up period of Anammox process (53 days) in R1 was shorter than that (61 days) in R2. The nitrogen loading-enhancing period (day 53-day 135) in R1 was also shorter than that (day 61-day 151) in R2. At the end of the nitrogen loading-enhancing period, NLR (0.76 kg N m -3  d -1 ) and NRR (0.68 kg N m -3  d -1 ) of R1 were both higher than NLR (0.66 kg N m -3  d -1 ) and NRR (0.56 kg N m -3  d -1 ) of R2. Moreover, The stability of Anammox process in R1 was better than that in R2. The results demonstrated that the periodical irradiation of ultrasound enhanced the start-up and operational performance of Anammox reactor. Microbial community analysis indicated that the ultrasound accelerated the microbial succession from some other bacteria to Anammox bacteria so that shorten the start-up period of Anammox process from the conventional activated sludge. It also indicated that the ultrasound strengthened the competitive advantage of Candidatus Kuenenia stuttgartiensis in Anammox bacteria of the mature sludge so as to enhance the nitrogen removal performance of the Anammox reactor under the operation condition of high nitrogen loading. Copyright © 2017 Elsevier B.V. All rights reserved.

Bacterial Selection during the Formation of Early-Stage Aerobic Granules in Wastewater Treatment Systems Operated Under Wash-Out Dynamics

PubMed Central

Weissbrodt, David G.; Lochmatter, Samuel; Ebrahimi, Sirous; Rossi, Pierre; Maillard, Julien; Holliger, Christof

2012-01-01

Aerobic granular sludge is attractive for high-rate biological wastewater treatment. Biomass wash-out conditions stimulate the formation of aerobic granules. Deteriorated performances in biomass settling and nutrient removal during start-up have however often been reported. The effect of wash-out dynamics was investigated on bacterial selection, biomass settling behavior, and metabolic activities during the formation of early-stage granules from activated sludge of two wastewater treatment plants (WWTP) over start-up periods of maximum 60 days. Five bubble-column sequencing batch reactors were operated with feast-famine regimes consisting of rapid pulse or slow anaerobic feeding followed by aerobic starvation. Slow-settling fluffy granules were formed when an insufficient superficial air velocity (SAV; 1.8 cm s−1) was applied, when the inoculation sludge was taken from a WWTP removing organic matter only, or when reactors were operated at 30°C. Fast-settling dense granules were obtained with 4.0 cm s−1 SAV, or when the inoculation sludge was taken from a WWTP removing all nutrients biologically. However, only carbon was aerobically removed during start-up. Fluffy granules and dense granules were displaying distinct predominant phylotypes, namely filamentous Burkholderiales affiliates and Zoogloea relatives, respectively. The latter were predominant in dense granules independently from the feeding regime. A combination of insufficient solid retention time and of leakage of acetate into the aeration phase during intensive biomass wash-out was the cause for the proliferation of Zoogloea spp. in dense granules, and for the deterioration of BNR performances. It is however not certain that Zoogloea-like organisms are essential in granule formation. Optimal operation conditions should be elucidated for maintaining a balance between organisms with granulation propensity and nutrient removing organisms in order to form granules with BNR activities in short start-up periods. PMID:22993513

Bacterial Selection during the Formation of Early-Stage Aerobic Granules in Wastewater Treatment Systems Operated Under Wash-Out Dynamics.

PubMed

Weissbrodt, David G; Lochmatter, Samuel; Ebrahimi, Sirous; Rossi, Pierre; Maillard, Julien; Holliger, Christof

2012-01-01

Aerobic granular sludge is attractive for high-rate biological wastewater treatment. Biomass wash-out conditions stimulate the formation of aerobic granules. Deteriorated performances in biomass settling and nutrient removal during start-up have however often been reported. The effect of wash-out dynamics was investigated on bacterial selection, biomass settling behavior, and metabolic activities during the formation of early-stage granules from activated sludge of two wastewater treatment plants (WWTP) over start-up periods of maximum 60 days. Five bubble-column sequencing batch reactors were operated with feast-famine regimes consisting of rapid pulse or slow anaerobic feeding followed by aerobic starvation. Slow-settling fluffy granules were formed when an insufficient superficial air velocity (SAV; 1.8 cm s(-1)) was applied, when the inoculation sludge was taken from a WWTP removing organic matter only, or when reactors were operated at 30°C. Fast-settling dense granules were obtained with 4.0 cm s(-1) SAV, or when the inoculation sludge was taken from a WWTP removing all nutrients biologically. However, only carbon was aerobically removed during start-up. Fluffy granules and dense granules were displaying distinct predominant phylotypes, namely filamentous Burkholderiales affiliates and Zoogloea relatives, respectively. The latter were predominant in dense granules independently from the feeding regime. A combination of insufficient solid retention time and of leakage of acetate into the aeration phase during intensive biomass wash-out was the cause for the proliferation of Zoogloea spp. in dense granules, and for the deterioration of BNR performances. It is however not certain that Zoogloea-like organisms are essential in granule formation. Optimal operation conditions should be elucidated for maintaining a balance between organisms with granulation propensity and nutrient removing organisms in order to form granules with BNR activities in short start-up periods.

Use of Interview and Observation to Clarify Reported Practices of Head Start Staff Concerning Problem Behavior: Implications for Programs and Training

ERIC Educational Resources Information Center

Snell, Martha E.; Voorhees, Mary D.; Berlin, Rebecca A.; Stanton-Chapman, Tina L.; Hadden, Sarah; McCarty, Jane

2012-01-01

This study used interviews and classroom observation to follow up a survey of 78 Head Start staff from five programs in the mid-Atlantic region. The purpose of the study was to collect additional details about administrator and staff needs in regard to addressing children's challenging behavior in order to design a PBS in-service intervention.…

Starting and Managing a Retail Flower Shop. The Starting and Managing Series, Volume 18.

ERIC Educational Resources Information Center

Krone, Paul R.

This booklet is intended to give a general idea of what is required to set up and manage a flower shop, to point out some of the problems and rewards, and to tell where to find more detailed information. First, an overview of the business is provided, telling the background required in education and experience as well as the amount of profit that…

Translations on USSR Resources, No. 836.

DTIC Science & Technology

1978-11-14

Mintransstroy has long been coordinated with the railroad administrations ol MPS. The access tracks are subsequently being transferred to the...loaded into the reactor and the unit is gradually brought up to design capacity. The Bilibino workers solemnly noted the second start on 12 January...section V. Migurenko. "And with special responsibility. We are starting a unit immediately for full design capacity — 300,000 kilo- watts — for the

Spindle

DOE Office of Scientific and Technical Information (OSTI.GOV)

2013-04-04

Spindle is software infrastructure that solves file system scalabiltiy problems associated with starting dynamically linked applications in HPC environments. When an HPC applications starts up thousands of pricesses at once, and those processes simultaneously access a shared file system to look for shared libraries, it can cause significant performance problems for both the application and other users. Spindle scalably coordinates the distribution of shared libraries to an application to avoid hammering the shared file system.

Rodolfo's Casa Caribe in Cuba: Business, Law, and Ethics of Investing in a Start-Up in Havana

ERIC Educational Resources Information Center

Sulkowski, Adam J.

2017-01-01

This case study presents the true story of Rodolfo--a former tailor and attorney from the provinces of Cuba--who moved to Havana to start a hospitality business. In 2016, the author (referred to as Adam throughout the case study), a business law professor from the United States, visited Havana to interview Rodolfo and learn about the factors for…

Breakout Reconnection Observed by the TESIS EUV Telescope

NASA Astrophysics Data System (ADS)

Reva, A. A.; Ulyanov, A. S.; Shestov, S. V.; Kuzin, S. V.

2016-01-01

We present experimental evidence of the coronal mass ejection (CME) breakout reconnection, observed by the TESIS EUV telescope. The telescope could observe solar corona up to 2 R⊙ from the Sun center in the Fe 171 Å line. Starting from 2009 April 8, TESIS observed an active region (AR) that had a quadrupolar structure with an X-point 0.5 R⊙ above photosphere. A magnetic field reconstructed from the Michelson Doppler Imager data also has a multipolar structure with an X-point above the AR. At 21:45 UT on April 9, the loops near the X-point started to move away from each other with a velocity of ≈7 km s-1. At 01:15 UT on April 10, a bright stripe appeared between the loops, and the flux in the GOES 0.5-4 Å channel increased. We interpret the loops’ sideways motion and the bright stripe as evidence of the breakout reconnection. At 01:45 UT, the loops below the X-point started to slowly move up. At 15:10 UT, the CME started to accelerate impulsively, while at the same time a flare arcade formed below the CME. After 15:50 UT, the CME moved with constant velocity. The CME evolution precisely followed the breakout model scenario.

The Researches on Reasonable Well Spacing of Gas Wells in Deep and low Permeability Gas Reservoirs

NASA Astrophysics Data System (ADS)

Bei, Yu Bei; Hui, Li; Lin, Li Dong

2018-06-01

This Gs64 gas reservoir is a condensate gas reservoir which is relatively integrated with low porosity and low permeability found in Dagang Oilfield in recent years. The condensate content is as high as 610g/m3. At present, there are few reports about the well spacing of similar gas reservoirs at home and abroad. Therefore, determining the reasonable well spacing of the gas reservoir is important for ensuring the optimal development effect and economic benefit of the gas field development. This paper discusses the reasonable well spacing of the deep and low permeability gas reservoir from the aspects of percolation mechanics, gas reservoir engineering and numerical simulation. considering there exist the start-up pressure gradient in percolation process of low permeability gas reservoir, this paper combined with productivity equation under starting pressure gradient, established the formula of gas well spacing with the formation pressure and start-up pressure gradient. The calculation formula of starting pressure gradient and well spacing of gas wells. Adopting various methods to calculate values of gas reservoir spacing are close to well testing' radius, so the calculation method is reliable, which is very important for the determination of reasonable well spacing in low permeability gas reservoirs.

Monitoring Start of Season in Alaska

NASA Astrophysics Data System (ADS)

Robin, J.; Dubayah, R.; Sparrow, E.; Levine, E.

2006-12-01

In biomes that have distinct winter seasons, start of spring phenological events, specifically timing of budburst and green-up of leaves, coincides with transpiration. Seasons leave annual signatures that reflect the dynamic nature of the hydrologic cycle and link the different spheres of the Earth system. This paper evaluates whether continuity between AVHRR and MODIS normalized difference vegetation index (NDVI) is achievable for monitoring land surface phenology, specifically start of season (SOS), in Alaska. Additionally, two thresholds, one based on NDVI and the other on accumulated growing degree-days (GDD), are compared to determine which most accurately predicts SOS for Fairbanks. Ratio of maximum greenness at SOS was computed from biweekly AVHRR and MODIS composites for 2001 through 2004 for Anchorage and Fairbanks regions. SOS dates were determined from annual green-up observations made by GLOBE students. Results showed that different processing as well as spectral characteristics of each sensor restrict continuity between the two datasets. MODIS values were consistently higher and had less inter-annual variability during the height of the growing season than corresponding AVHRR values. Furthermore, a threshold of 131-175 accumulated GDD was a better predictor of SOS for Fairbanks than a NDVI threshold applied to AVHRR and MODIS datasets. The NDVI threshold was developed from biweekly AVHRR composites from 1982 through 2004 and corresponding annual green-up observations at University of Alaska-Fairbanks (UAF). The GDD threshold was developed from 20+ years of historic daily mean air temperature data and the same green-up observations. SOS dates computed with the GDD threshold most closely resembled actual green-up dates observed by GLOBE students and UAF researchers. Overall, biweekly composites and effects of clouds, snow, and conifers limit the ability of NDVI to monitor phenological changes in Alaska.

EC assisted start-up experiments reproduction in FTU and AUG for simulations of the ITER case

DOE Office of Scientific and Technical Information (OSTI.GOV)

Granucci, G.; Ricci, D.; Farina, D.

The breakdown and plasma start-up in ITER are well known issues studied in the last few years in many tokamaks with the aid of calculation based on simplified modeling. The thickness of ITER metallic wall and the voltage limits of the Central Solenoid Power Supply strongly limit the maximum toroidal electric field achievable (0.3 V/m), well below the level used in the present generation of tokamaks. In order to have a safe and robust breakdown, the use of Electron Cyclotron Power to assist plasma formation and current rump up has been foreseen. This has raised attention on plasma formation phasemore » in presence of EC wave, especially in order to predict the required power for a robust breakdown in ITER. Few detailed theory studies have been performed up to nowadays, due to the complexity of the problems. A simplified approach, extended from that proposed in ref[1] has been developed including a impurity multispecies distribution and an EC wave propagation and absorption based on GRAY code. This integrated model (BK0D) has been benchmarked on ohmic and EC assisted experiments on FTU and AUG, finding the key aspects for a good reproduction of data. On the basis of this, the simulation has been devoted to understand the best configuration for ITER case. The dependency of impurity distribution content and neutral gas pressure limits has been considered. As results of the analysis a reasonable amount of power (1 - 2 MW) seems to be enough to extend in a significant way the breakdown and current start up capability of ITER. The work reports the FTU data reproduction and the ITER case simulations.« less

A study of starting time in great hard X-ray flares

NASA Technical Reports Server (NTRS)

Klein, K. L.; Pick, M.; Magun, A.

1986-01-01

An analysis of the starting time in ten great hard X-ray bursts observed with the X-Ray Burst Spectrometer (HXRBS) is presented. It is shown that the impulsive phase of nine of them is composed of a preflash phase, during which the burst is observed up to an energy limit ranging from some tens of keV to 200 keV, followed ten to some tens of seconds afterwards by a flash phase, where the count rate rises simultaneously in all detector channels. For two events strong gamma-ray line emission is observed and is shown to start close to the onset of the flash phase.

Wave Fluid Film Bearing Tests for an Aviation Gearbox

NASA Technical Reports Server (NTRS)

Dimofte, Florin; Proctor, Margaret P.; Fleming, David P.; Keith, Theo G., Jr.

2000-01-01

An oil-lubricated wave journal-thrust bearing assembly was successfully tested at conditions found in general aviation engine gearboxes. The bearing performed well at both steady state conditions and in start-stop tests. It ran stably under all loading conditions, including zero load, at all speeds up to 16 000 rpm. The bearing carried 25 percent more load than required for the gearbox application, supporting 8900 N (94 bars average pressure), and showed very good thermal stability. 450 start-stop cycles were also performed, including 350 cycles without oil supply during starting and stopping. Test results and numerical predictions were in good agreement.

Research for the Fluid Field of the Centrifugal Compressor Impeller in Accelerating Startup

NASA Astrophysics Data System (ADS)

Li, Xiaozhu; Chen, Gang; Zhu, Changyun; Qin, Guoliang

2013-03-01

In order to study the flow field in the impeller in the accelerating start-up process of centrifugal compressor, the 3-D and 1-D transient accelerated flow governing equations along streamline in the impeller of the centrifugal compressor are derived in detail, the assumption of pressure gradient distribution is presented, and the solving method for 1-D transient accelerating flow field is given based on the assumption. The solving method is achieved by programming and the computing result is obtained. It is obtained by comparison that the computing method is met with the test result. So the feasibility and effectiveness for solving accelerating start-up problem of centrifugal compressor by the solving method in this paper is proven.

Shortcut nitrification/partial nitritation start-up for reject water treatment in a SBR

NASA Astrophysics Data System (ADS)

Muszyński-Huhajło, Mateusz; Miodoński, Stanisław

2017-11-01

For many wastewater treatment plants (WWTPs), side-stream treatment of reject water from digested sludge dewatering is a feasible opportunity to improve N-removal efficiency without costly plant expansion. Biological nitrogen removal over nitrite or combined partial nitritation (PN)-Anammox process has recently become a popular treatment method for such ammonium-rich streams. Shortcut nitrification and PN start-ups were successfully performed in a pilot-scale SBR treating real reject water. In all performed experiments, effective nitrate production inhibition occurred in less than 20 days due to operational conditions selection and without advanced control system. pH adjustment in the PN reactor allowed to achieve NO2-N /NH4-N ratio suitable for Anammox process (1.24±0.07).

Experimental investigation of the ECRH stray radiation during the start-up phase in Wendelstein 7-X

NASA Astrophysics Data System (ADS)

Moseev, Dmitry; Laqua, Heinrich; Marsen, Stefan; Stange, Torsten; Braune, Harald; Erckmann, Volker; Gellert, Florian; Oosterbeek, Johann Wilhelm; Wenzel, Uwe

2017-07-01

Electron cyclotron resonance heating (ECRH) is the main heating mechanism in the Wendelstein 7-X stellarator (W7-X). W7-X is equipped with five absolutely calibrated sniffer probes that are installed in each of the five modules of the device. The sniffer probes monitor energy flux of unabsorbed ECRH radiation in the device and interlocks are fed with the sniffer probe signals. The stray radiation level in the device changes significantly during the start-up phase: plasma is a strong microwave absorber and during its formation the stray radiation level in sniffer probes reduces by more than 95%. In this paper, we discuss the influence of neutral gas pressure and gyrotron power on plasma breakdown processes.

Follow Up Study of Female Radio and TV Servicing Apprentices. Part 1.

ERIC Educational Resources Information Center

Society for Research on Women, Auckland (New Zealand).

Female program completers and dropouts from a one-year course in radio and television servicing at Auckland Technical Institute (New Zealand) were followed up. Respondents included nine completers from the 1977 course, eight completers from the 1978 course, and three dropouts. Background information showed that 10 completers started the course…

Use of a Modern Polymerization Pilot-Plant for Undergraduate Control Projects.

ERIC Educational Resources Information Center

Mendoza-Bustos, S. A.; And Others

1991-01-01

Described is a project where students gain experience in handling large volumes of hazardous materials, process start up and shut down, equipment failures, operational variations, scaling up, equipment cleaning, and run-time scheduling while working in a modern pilot plant. Included are the system design, experimental procedures, and results. (KR)

7 CFR 4280.16 - REDL and REDG Loan terms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false REDL and REDG Loan terms. 4280.16 Section 4280.16 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND... up to 2 years for Projects involving a Start-Up venture or a Community Facilities Project whether or...

40 CFR 53.41 - Test conditions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Test conditions. 53.41 Section 53.41... PM10 § 53.41 Test conditions. (a) Set-up and start-up of all test samplers shall be in strict... shall be cleaned prior to conducting wind tunnel tests with solid particles. (c) Once the test sampler...

40 CFR 53.41 - Test conditions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test conditions. 53.41 Section 53.41... PM10 § 53.41 Test conditions. (a) Set-up and start-up of all test samplers shall be in strict... shall be cleaned prior to conducting wind tunnel tests with solid particles. (c) Once the test sampler...

Public Health Impact of Wildfire Emissions: Up-date on the Wildfire Smoke Guide, Public Health Information and Communications Research

EPA Science Inventory

EPA Tools and Resources Webinar: Public Health Impact of Wildfire Smoke Emissions Specific strategies to reduce smoke exposure and the Smoke Sense App As the start of the summer wildfire season approaches, public officials, communities and individuals need up-to-date wildfire smo...

78 FR 26794 - Prospective Grant of Start-Up Exclusive Evaluation Option License Agreement: Gene Therapy and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-08

...-Up Exclusive Evaluation Option License Agreement: Gene Therapy and Cell-Based Therapy for Cardiac... the field of use may be limited to ``Gene therapy and cell-based therapy for cardiac arrhythmias in...\\2+\\-activated adenylyl cyclase, as well as cardiac cells or cardiac-like cells derived from...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morales, M.; Revah, S.; Auria, R.

Biotechnological techniques, including biofilters and biotrickling filters are increasingly used to treat air polluted with VOCs (Volatile Organic Compounds). In this work, the start-up, the effect of the gaseous ammonia addition on the toluene removal rate, and the problems of the heat accumulation on the performance of a laboratory scale biofilter were studied. The packing material was sterilized peat enriched with a mineral medium and inoculated with an adapted consortium (two yeast and five bacteria). Start-up showed a short adaptation period and an increased toluene elimination capacity (EC) up to a maximum of 190 g/m{sup 3}/h. This was related tomore » increased CO{sub 2} outlet concentration and temperature gradients between the packed bed and the inlet (Tm-Tin). These events were associated with the growth of the microbial population. The biofilter EC decreased thereafter, to attain a steady state of 8 g/m{sup 3}/h. At this point, gaseous ammonia was added. EC increased up to 80 g/m{sup 3}/h, with simultaneous increases on the CO{sub 2} concentration and (Tm-Tin).« less

Starting Up Your Own Business in the Hotel and Catering Industry. A Self-Help Guide from the Small Business Service of the Hotel and Catering Industry Training Board.

ERIC Educational Resources Information Center

Hotel and Catering Training Board, Wembley (England).

This guide is intended to assist the potential small business proprietor in successfully starting a business in the hotel and catering industry. It is divided into five sections. The first section discusses factors to be considered in making the initial decision of whether or not to seek self-employment in the industry (options, potential…

Starting a hospital-based home health agency: Part II--Key success factors.

PubMed

Montgomery, P

1993-09-01

In Part II of a three-part series, the financial, technological and legislative issues of a hospital-based home health-agency are discussed. Beginning a home healthcare service requires intensive research to answer key environmental and operational questions--need, competition, financial projections, initial start-up costs and the impact of delayed depreciation. Assessments involving technology, staffing, legislative and regulatory issues can help project service volume, productivity and cost-control.

Loss to follow-up among children and adolescents growing up with HIV infection: age really matters.

PubMed

Kranzer, Katharina; Bradley, John; Musaazi, Joseph; Nyathi, Mary; Gunguwo, Hilary; Ndebele, Wedu; Dixon, Mark; Ndhlovu, Mbongeni; Rehman, Andrea; Khan, Palwasha; Vogt, Florian; Apollo, Tsitsi; Ferrand, Rashida Abbas

2017-07-17

Globally, increasing numbers of HIV-infected children are reaching adolescence due to antiretroviral therapy (ART). We investigated rates of loss-to-follow-up (LTFU) from HIV care services among children as they transition from childhood through adolescence. Individuals aged 5-19 years initiated on ART in a public-sector HIV clinic in Bulawayo, Zimbabwe, between 2005 and 2009 were included in a retrospective cohort study. Participants were categorized into narrow age-bands namely: 5-9 (children), 10-14 (young adolescents) and 15-19 (older adolescents). The effect of age at ART initiation, current age (using a time-updated Lexis expansion) and transitioning from one age group to the next on LTFU was estimated using Poisson regression. Of 2273 participants, 1013, 875 and 385 initiated ART aged 5-9, 10-14 and 15-19 years, respectively. Unlike those starting ART as children, individuals starting ART as young adolescents had higher LTFU rates after moving to the older adolescent age-band (Adjusted rate ratio (ARR) 1.54; 95% CI: 0.94-2.55) and similarly, older adolescents had higher LTFU rates after transitioning to being young adults (ARR 1.79; 95% CI: 1.05-3.07). In older adolescents, the LTFU rate among those who started ART in that age-band was higher compared to the rate among those starting ART at a younger age (ARR = 1.70; 95% CI: 1.05, 2.77). This however did not hold true for other age-groups. Adolescents had higher rates of LTFU compared to other age-groups, with older adolescents at particularly high risk in all analyses. Age-updated analyses that examine movement across narrow age-bands are paramount in understanding how developmental heterogeneity in children affects HIV outcomes.

Long-Term Persistence with Injectable Therapy in Relapsing-Remitting Multiple Sclerosis: An 18-Year Observational Cohort Study

PubMed Central

Zhornitsky, Simon; Greenfield, Jamie; Koch, Marcus W.; Patten, Scott B.; Harris, Colleen; Wall, Winona; Alikhani, Katayoun; Burton, Jodie; Busche, Kevin; Costello, Fiona; Davenport, Jeptha W.; Jarvis, Scott E.; Lavarato, Dina; Parpal, Helene; Patry, David G.; Yeung, Michael; Metz, Luanne M.

2015-01-01

Disease modifying therapies (DMTs) reduce the frequency of relapses and accumulation of disability in multiple sclerosis (MS). Long-term persistence with treatment is important to optimize treatment benefit. This long-term, cohort study was conducted at the Calgary MS Clinic. All consenting adults with relapsing-remitting MS who started either glatiramer acetate (GA) or interferon-β 1a/1b (IFN-β) between January 1st, 1996 and July 1st, 2011 were included. Follow-up continued to February 1st, 2014. Time-to-discontinuation of the initial and subsequently-prescribed DMTs (switches) was analysed using Kaplan-Meier survival analyses. Group differences were compared using log-rank tests and multivariable Cox regression models. Analysis included 1471 participants; 906 were initially prescribed GA and 565 were initially prescribed IFN-β. Follow-up information was available for 87%; 29 (2%) were lost to follow-up and 160 (11%) moved from Southern Alberta while still using DMT. Median time-to-discontinuation of all injectable DMTs was 11.1 years. Participants with greater disability at treatment initiation, those who started treatment before age 30, and those who started between 2006 and 2011 were more likely to discontinue use of all injectable DMTs. Median time-to-discontinuation of the initial DMT was 8.6 years. Those initially prescribed GA remained on treatment longer. Of 610 participants who discontinued injectable DMT, 331 (54%) started an oral DMT, or a second-line DMT, or resumed injectable DMT after 90 days. Persistence with injectable DMTs was high in this long-term population-based study. Most participants who discontinued injectable DMT did not remain untreated. Further research is required to understand treatment outcomes and outcomes after stopping DMT. PMID:25867095

Plain Language: Getting Started or Brushing Up

MedlinePlus

... Record Research & Training Medical Research Initiatives Science Highlights Science Education Research in NIH Labs & Clinics Training Opportunities Library Resources Research Resources Clinical Research Resources Safety, Regulation ...

Long-Term Outcomes of Medication Intervention Using the Screening Tool of Older Persons Potentially Inappropriate Prescriptions Screening Tool to Alert Doctors to Right Treatment Criteria.

PubMed

Frankenthal, Dvora; Israeli, Avi; Caraco, Yoseph; Lerman, Yaffa; Kalendaryev, Edward; Zandman-Goddard, Gisele; Lerman, Yehuda

2017-02-01

To compare 24-month outcomes of participants of a prospective randomized controlled trial (RCT) assigned to undergo a medication intervention of orally communicated recommendations based on Screening Tool of Older Persons potentially inappropriate Prescriptions (STOPP) and Screening Tool to Alert Doctors to Right Treatment (START) (intervention group) with outcomes of those assigned to undergo written medication review (control group). Retrospective cohort study. Chronic care geriatric facility. Of 359 participants from a prospective RCT conducted between April 2012 and September 2013, 306 were evaluable for another 12-month follow-up. Outcomes at 24-month follow-up included quality of prescribing (assessed according to STOPP/START), hospitalizations, falls, costs of medications, and all-cause mortality. Outcomes were compared with those reported at the beginning (baseline) and end (12-month follow-up) of the RCT. There was a significant rise in potentially inappropriate prescriptions (PIPs) (P = .01) and potentially prescriptions omissions (PPOs) (P < .001) in the intervention group between 12 and 24 months, although the prevalence of PIPs was significantly lower in the intervention group (33.3%) than the control group (48.4%) at 24-month follow-up (P = .02). Costs of medications were significantly lower in the intervention group than the control group (P < .001) at 24-month follow-up. The average number of falls in both groups dropped significantly between baseline and study closure (P = .04 and P = .008, respectively). There was no significant difference in hospitalizations and mortality between the two groups at 24-month follow-up. The effect of an orally communicated medication intervention with the STOPP/START criteria on falls was maintained over time. Direct communication between pharmacists and prescribing physicians is more efficient than written medication review and is recommended every 6 months in geriatric facilities. © 2016, Copyright the Authors Journal compilation © 2016, The American Geriatrics Society.

Rapid starting methanol reactor system

DOEpatents

Chludzinski, Paul J.; Dantowitz, Philip; McElroy, James F.

1984-01-01

The invention relates to a methanol-to-hydrogen cracking reactor for use with a fuel cell vehicular power plant. The system is particularly designed for rapid start-up of the catalytic methanol cracking reactor after an extended shut-down period, i.e., after the vehicular fuel cell power plant has been inoperative overnight. Rapid system start-up is accomplished by a combination of direct and indirect heating of the cracking catalyst. Initially, liquid methanol is burned with a stoichiometric or slightly lean air mixture in the combustion chamber of the reactor assembly. The hot combustion gas travels down a flue gas chamber in heat exchange relationship with the catalytic cracking chamber transferring heat across the catalyst chamber wall to heat the catalyst indirectly. The combustion gas is then diverted back through the catalyst bed to heat the catalyst pellets directly. When the cracking reactor temperature reaches operating temperature, methanol combustion is stopped and a hot gas valve is switched to route the flue gas overboard, with methanol being fed directly to the catalytic cracking reactor. Thereafter, the burner operates on excess hydrogen from the fuel cells.

Out of arid Africa: Debate heats up on whether climate change sparks evolutionary outbursts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monastersky, R.

1996-08-03

Something strange started happening to the world around 2.5 million years ago. In the far north, the once balmy climate turned bitter as glacial sheets advanced over the landscape and icebergs started bobbing in the Atlantic. In the Andes of South America, forests disappeared and grasslands took over as the weather turned cooler and drier. In northwest Africa, an infant desert started gobbling up acreage en route to becoming the vast Sahara. In southern and eastern Africa, increasing aridity withered woodlands and helped savannas spread. Amid all this ecological change, a group of erect apes underwent a burst of evolutionmore » that led eventually to the appearance of the genus Homo. Coincidence or not? That is the question raised by a provocative idea called the turnover pulse hypothesis, proposed in 1985 by paleontologist Elisabeth Vrba of Yale University. The theory holds that species tend to remain stable until the environment changes, triggering rapid spells of extinctions and originations. This article discusses the various pieces of evidence and opinions on this.« less

Start-up and control method and apparatus for resonant free piston Stirling engine

DOEpatents

Walsh, Michael M.

1984-01-01

A resonant free-piston Stirling engine having a new and improved start-up and control method and system. A displacer linear electrodynamic machine is provided having an armature secured to and movable with the displacer and having a stator supported by the Stirling engine housing in juxtaposition to the armature. A control excitation circuit is provided for electrically exciting the displacer linear electrodynamic machine with electrical excitation signals having substantially the same frequency as the desired frequency of operation of the Stirling engine. The excitation control circuit is designed so that it selectively and controllably causes the displacer electrodynamic machine to function either as a generator load to extract power from the displacer or the control circuit selectively can be operated to cause the displacer electrodynamic machine to operate as an electric drive motor to apply additional input power to the displacer in addition to the thermodynamic power feedback to the displacer whereby the displacer linear electrodynamic machine also is used in the electric drive motor mode as a means for initially starting the resonant free-piston Stirling engine.

Perceived access to fruits and vegetables associated with increased consumption.

PubMed

Caldwell, Erin M; Miller Kobayashi, M; DuBow, W M; Wytinck, S M

2009-10-01

To examine the association between fruit and vegetable access in the community and change in fruit and vegetable consumption among participants in community-based health promotion programmes. Fruit and vegetable consumption and perceived access to fresh fruit and vegetables were measured by self-administered questionnaires at programme start, end and 1-year follow-up. Community produce availability was determined by grocery store assessments measuring the display space devoted to fruit and vegetable offerings, as well as price, variety and freshness. A total of nine communities were studied; 130 participants completed the fruit and vegetable portions of the questionnaires and could be linked to grocery store assessments. Participants made modest but significant increases in fruit and vegetable consumption from programme start to end: the average increase was 2.88 (95% CI 1.52, 4.25) servings weekly; the average increase from start to follow-up was 2.52 (95% CI 1.09, 3.95) servings weekly. Greater perceived access to fruits and vegetables was significantly associated with higher increases in fruit and vegetable consumption from programme start to programme end. Greater availability of produce was associated with greater increases in fruit and vegetable servings from programme start to programme end as measured by store assessments. Environmental factors, such as access to fruits and vegetables, can modify the effects of community interventions. Interventions with the goal of increasing fruit and vegetable consumption should consider focusing on increasing access to fresh fruits and vegetables in target communities. Similarly, researchers may want to study access as an intervention, not just a contextual variable.

INVESTIGATING THE EFFICACY OF CLINICAL TRIAL MONITORING STRATEGIES: Design and Implementation of the Cluster Randomized START Monitoring Substudy

PubMed Central

Hullsiek, Katherine Huppler; Kagan, Jonathan M; Engen, Nicole; Grarup, Jesper; Hudson, Fleur; Denning, Eileen T; Carey, Catherine; Courtney-Rodgers, David; Finley, Elizabeth B; Jansson, Per O; Pearson, Mary T; Peavy, Dwight E; Belloso, Waldo H

2014-01-01

Background Trial monitoring protects participant safety and study integrity. While monitors commonly go on-site to verify source data, there is little evidence that this practice is efficient or effective. An ongoing international HIV treatment trial (START) provides an opportunity to explore the usefulness of different monitoring approaches. Methods All START sites are centrally monitored and required to follow a local monitoring plan requiring specific quality assurance activities. Additionally, sites were randomized (1:1) to receive, or not receive, annual on-site monitoring. The study will determine if on-site monitoring increases the identification of major protocol deviations (eligibility or consent violations, improper study drug use, primary or serious event underreporting, data alteration or fraud). Results The START study completed enrollment in December 2013, with planned follow-up through December 2016. The monitoring study is ongoing at 196 sites in 34 countries. Results are expected when the START study concludes in December 2016. PMID:25973346

Middle school start times: the importance of a good night's sleep for young adolescents.

PubMed

Wolfson, Amy R; Spaulding, Noah L; Dandrow, Craig; Baroni, Elizabeth M

2007-01-01

With the onset of adolescence, teenagers require 9.2 hr of sleep and experience a delay in the timing of sleep. In the "real world" with early school start times, however, they report less sleep, striking differences between their school-weekend sleep schedules, and significant daytime sleepiness. Prior studies demonstrated that high schoolers with later school starts do not further delay bedtime but obtain more sleep due to later wake times. This study examined sleep-wake patterns of young adolescents attending urban, public middle schools with early (7:15 a.m.) versus late (8:37 a.m.) start times. Students (N = 205) were assessed at 2 time periods. Students at the late-starting school reported waking up over 1 hr later on school mornings and obtaining 50 min more sleep each night, less sleepiness, and fewer tardies than students at the early school. All students reported similar school-night bedtime, sleep hygiene practices, and weekend sleep schedules.

Effects of a Classroom-Embedded Occupational Therapist–Teacher Handwriting Program for First-Grade Students

PubMed Central

Weaver, Lindy; Holland, Terri

2014-01-01

This study examined the effectiveness of Write Start, a handwriting and writing program cotaught by teachers and occupational therapists for first-grade children. Four classrooms (n = 80) received the Write Start program, and four (n = 58) received standard handwriting and writing instruction. Two teachers and an occupational therapist implemented the 24-session manualized program, which included station teaching and individualized supports. The program emphasized practice in small groups in which the coteaching team provided students with frequent feedback, encouraged self-evaluation, and facilitated peer modeling and peer evaluation. Students who completed the Write Start program improved more in handwriting legibility and speed than the group receiving standard instruction. Writing fluency and written composition were no different between groups at posttest; however, writing fluency was significantly higher for Write Start students at 6-mo follow-up. Write Start students with low legibility at baseline made significant improvements, suggesting that the program may benefit students at risk for handwriting and writing problems. PMID:25397764

Reduced oxygen concentration for the resuscitation of infants with congenital diaphragmatic hernia.

PubMed

Riley, John S; Antiel, Ryan M; Rintoul, Natalie E; Ades, Anne M; Waqar, Lindsay N; Lin, Nan; Herkert, Lisa M; D'Agostino, Jo Ann; Hoffman, Casey; Peranteau, William H; Flake, Alan W; Adzick, N Scott; Hedrick, Holly L

2018-06-11

To evaluate whether infants with congenital diaphragmatic hernia (CDH) can be safely resuscitated with a reduced starting fraction of inspired oxygen (FiO 2 ) of 0.5. A retrospective cohort study comparing 68 patients resuscitated with starting FiO 2 0.5 to 45 historical controls resuscitated with starting FiO 2 1.0. Reduced starting FiO 2 had no adverse effect upon survival, duration of intubation, need for ECMO, duration of ECMO, or time to surgery. Furthermore, it produced no increase in complications, adverse neurological events, or neurodevelopmental delay. The need to subsequently increase FiO 2 to 1.0 was associated with female sex, lower gestational age, liver up, lower lung volume-head circumference ratio, decreased survival, a higher incidence of ECMO, longer time to surgery, periventricular leukomalacia, and lower neurodevelopmental motor scores. Starting FiO 2 0.5 may be safe for the resuscitation of CDH infants. The need to increase FiO 2 to 1.0 during resuscitation is associated with worse outcomes.

A kinetic analysis of manual wheelchair propulsion during start-up on select indoor and outdoor surfaces.

PubMed

Koontz, Alicia M; Cooper, Rory A; Boninger, Michael L; Yang, Yusheng; Impink, Bradley G; van der Woude, Lucas H V

2005-01-01

The objective of this study was to conduct a kinetic analysis of manual wheelchair propulsion during start-up on select indoor and outdoor surfaces. Eleven manual wheelchairs were fitted with a SMART(Wheel) and their users were asked to push on a course consisting of high- and low-pile carpet, indoor tile, interlocking concrete pavers, smooth level concrete, grass, hardwood flooring, and a sidewalk with a 5-degree grade. Peak resultant force, wheel torque, mechanical effective force, and maximum resultant force rate of rise were analyzed during start-up for each surface and normalized relative to their steady-state values on the smooth level concrete. Additional variables included peak velocity, distance traveled, and number of strokes in the first 5 s of the trial. We compared biomechanical data between surfaces using repeated-measures mixed models and paired comparisons with a Bonferroni adjustment. Applied resultant force (p = 0.0154), wheel torque (p < 0.0001), and mechanical effective force (p = 0.0047) were significantly different between surfaces. The kinetic values for grass, interlocking pavers, and ramp ascent were typically higher compared with tile, wood, smooth level concrete, and high- and low-pile carpet. Users were found to travel shorter distances up the ramp and across grass (p < 0.0025) and had a higher stroke count on the ramp (p = 0.0124). While peak velocity was not statistically different, average velocity was slower for the ramp and grass, which indicates greater wheelchair/user deceleration between strokes. The differences noted between surfaces highlight the importance of evaluating wheelchair propulsion ability over a range of surfaces.

Beneficial effects of gluten free diet in potential coeliac disease in adult population.

PubMed

Imperatore, Nicola; Tortora, Raffaella; De Palma, Giovanni Domenico; Capone, Pietro; Gerbino, Nicolò; Donetto, Sara; Testa, Anna; Caporaso, Nicola; Rispo, Antonio

2017-08-01

To date, potential coeliac disease (PCD) occurring in adults remains an almost unexplored condition. To explore the prognostic role of Marsh grade in adult PCD patients, and to evaluate the effects of gluten-containing diet (GCD) in asymptomatic PCD patients. We retrospectively evaluated all consecutive adult PCD patients followed-up for at least 6 years. Patients were divided into: Group A (patients with Marsh 0 histology) and Group B (Marsh 1 patients). Symptomatic patients were started gluten-free diet (GFD), while asymptomatic subjects were kept on GCD and were followed-up. 56 PCD patients were enrolled (21 in Group A and 35 in Group B). Forty-three patients were symptomatic and started GFD. Of these, none of 15 patients in Group A and 8 of 28 patients in Group B developed immune-mediated disorders (IMD) during follow-up (P=0.03; OR=4.2). The 13 asymptomatic PCD patients were kept on GCD. During the follow-up, 9 patients developed CD-related symptoms, 6 villous atrophy and 8 IMD. At the end, patients kept on GCD were at higher risk of developing IMD than those following a GFD (61% vs 18%, P=0.03, OR=3.3). Although PCD with normal mucosa seems to be a milder disease, the continuation of GCD places patients at a high risk of developing villous atrophy and IMD compared to commencement of GFD. Adult PCD patients should start GFD even if not symptomatic. Copyright © 2017 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

How To Set Up Your Own Small Business. Service Company Case Study. Manufacturing Firm Case Study. Retail Store Case Study.

ERIC Educational Resources Information Center

Fallek, Max

This collection of case studies is intended for use in a course in setting up a small business. The first, a case study of the process of setting up a service company, covers analyzing the pros and cons of starting one's own business, assessing the competition and local market, and selecting a site for and financing the business. The principal…

Spectroscopic Measurement of Ion Flow During Merging Start-up of Field-Reversed Configuration

NASA Astrophysics Data System (ADS)

Oka, Hirotaka; Inomoto, Michiaki; Tanabe, Hiroshi; Annoura, Masanobu; Ono, Yasushi; Nemoto, Koshichi

2012-10-01

The counter-helicity merging method [1] of field-reversed configuration (FRC) formation involves generation of bidirectional toroidal flow, known as a ``sling-shot.'' In two fluids regime, reconnection process is strongly affected by the Hall effect [2]. In this study, we have investigated the behavior of toroidal bidirectional flow generated by the counter-helicity merging in two-fluids regime. We use 2D Ion Doppler Spectroscopy to mesure toroidal ion flow during merging start-up of FRC from Ar gas. We defined two cases: one case with a radially pushed-in X line (case I) and the other case with a radially pushed-out X line(case O). The flow during the plasma merging shows radial asymmetry, as expected from the magnetic measurement, but finally relaxes to a unidirectional flow in plasma current direction in both cases. We observed larger toroidal flow in the plasma current direction in case I after FRC is formed, though the FRC in case O has larger magnetic flux. These results suggest that more ions are lost during merging start-up in case I. This selective ion loss might account for stability and confinement of FRCs probably maintained by high energy ions.[4pt] [1] Y. Ono, et al., Nucl. Fusion 39, pp. 2001-2008 (1999).[0pt] [2] M. Inomoto, et al., Phys. Rev. Lett., 97, 135002, (2006)

Impact of the start-up process on the microbial communities in biocathodes for electrosynthesis.

PubMed

Mateos, Raúl; Sotres, Ana; Alonso, Raúl M; Escapa, Adrián; Morán, Antonio

2018-06-01

This study seeks to understand how the bacterial communities that develop on biocathodes are influenced by inocula diversity and electrode potential during start-up. Two different inocula are used: one from a highly diverse environment (river mud) and the other from a low diverse milieu (anaerobic digestion). In addition, both inocula were subjected to two different polarising voltages: oxidative (+0.2 V vs. Ag/AgCl) and reductive (-0.8 V vs. Ag/AgCl). Bacterial communities were analysed by means of high throughput sequencing. Possible syntrophic interactions and competitions between archaea and eubacteria were described together with a discussion of their potential role in product formation and current production. The results confirmed that reductive potentials lead to an inconsistent start-up procedure regardless of the inoculum used. However, imposing oxidative potentials help to quickly develop an electroactive biofilm ready to withstand reductive potentials (i.e. biocathodic operation). The microbial structure that finally developed on them was highly dependent on the raw community present in the inoculum. Using a non-specialised inoculum resulted in a highly specialised biofilm, which was accompanied by an improved performance in terms of consumed current and product generation. Interestingly, a much more specialised inoculum promoted a rediversification in the biofilm, with a lower general cell performance. Copyright © 2018 Elsevier B.V. All rights reserved.

Design, Fabrication and Testing of Two Different Laboratory Prototypes of CSI-based Induction Heating Units

NASA Astrophysics Data System (ADS)

Roy, M.; Sengupta, M.

2012-09-01

Induction heating is a non-contact heating process which became popular due to its energy efficiency. Current source inverter (CSI) based induction heating units are commonly used in the industry. Most of these CSIs are thyristor based, since thyristors of higher ratings are easily available. These being load commutated apparatus a start-up circuit is needed to initiate commutation. In this paper the design and fabrication of two laboratory prototypes have been presented. The first one, a SCR-based CSI fed controlled induction heating unit (IHU), has been tested with two different types of start-up procedures. Thereafter the fabrication and performance of another IGBT-based CSI is compared with the thyristor-based CSI for a 2 kW, 10 kHz application. These two types of CSIs are fully fabricated in laboratory along with the IHU. Performance analysis and simulation of two different CSIs has been done by using SequelGUI2. The triggering pulses for the inverter devices (for both CSI devices as well as auxilliary thyristor of start-up circuit) have been generated and closed-loop control has been done in FPGA platform built around an Altera make cyclone EPIC12Q240C processor which can be programmed using Quartus II software. Close agreement between simulated and experimental results highlight the accuracy of the experimental work.

Joe Simon | NREL

Science.gov Websites

, and analysis. To enable market transformation and growth, he continuously supports several DOE-funded Building science Renewable energy Modular construction Start-ups Solar Education Competitions Education

Graphic Grown Up

ERIC Educational Resources Information Center

Kim, Ann

2009-01-01

It's no secret that children and YAs are clued in to graphic novels (GNs) and that comics-loving adults are positively giddy that this format is getting the recognition it deserves. Still, there is a whole swath of library card-carrying grown-up readers out there with no idea where to start. Splashy movies such as "300" and "Spider-Man" and their…

Recovery of Mycobacterium lentiflavum from bronchial lavage during follow-up of an extrapulmonary tuberculosis patient.

PubMed

Vise, Esther; Mawlong, Michael; Garg, Akshay; Sen, Arnab; Shakuntala, Ingudam; Das, Samir

2017-01-01

Initially diagnosed with cervical lymphadenitis, a 15-year-old boy was started with category I anti-tuberculosis (TB) drugs. Follow-up investigations led to isolation and identification of Mycobacterium lentiflavum by multiple diagnostic and identification approaches. Observation of this rare pathogen from human origin urges cautious diagnosis while attending TB cases.

Start-Up Mega Planning--A Case History

ERIC Educational Resources Information Center

Forbes, Ronald; Forbes, Dylan; Hoskins, Peter

2005-01-01

Social Responsibility is becoming a key issue for organizations today. They talk about it and they make social contributions, but how do we know if anything is being achieved? A framework is required and has existed at least since 1992. Roger Kaufman's Mega Planning has slowly gathered momentum in organizations worldwide. For a faster take-up we…

Teaching Evaluation of Higher Education Institutions: Retrospect and Prospect

ERIC Educational Resources Information Center

Siping, Gao

2009-01-01

China started up pilot projects for the evaluation of teaching work at regular higher education institutions (HEIs) in 1994, and, beginning in 2003, the Ministry of Education (MOE) formally set up a system of cyclical teaching evaluation. Among the 592 undergraduate colleges and universities that were listed in the plan for the first round of…

An Alternative to Business Plan Based Advice for Start-Ups?

ERIC Educational Resources Information Center

Bridge, Simon; Hegarty, Cecilia

2012-01-01

Business plans are advocated by many business support professionals and others, such as educators in higher education institutions, because they suit their purposes. A typical view is that a business plan is "one of the most important steps in setting up any new business" (Burns, 2011); but their hegemony is now being questioned. Sarasvathy (2008)…

Notification: Follow-Up Review on OIG Report No. 12-P-0508, EPA Inaction in Identifying Hazardous Waste Pharmaceuticals May Result in Unsafe Disposal

EPA Pesticide Factsheets

Project #OPE-FY14-0022, March 10, 2014. The U.S. Environmental Protection Agency (EPA) Office of Inspector General (OIG) is starting a follow-up review on the EPA's actions to address the recommendations in the subject report, issued May 25, 2012.

40 CFR 53.21 - Test conditions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Test conditions. 53.21 Section 53.21... Methods SO2, CO, O3, and NO2 § 53.21 Test conditions. (a) Set-up and start-up of the test analyzer shall... before beginning the tests. The test procedures assume that the test analyzer has an analog measurement...

40 CFR 53.21 - Test conditions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test conditions. 53.21 Section 53.21... Methods SO2, CO, O3, and NO2 § 53.21 Test conditions. (a) Set-up and start-up of the test analyzer shall... before beginning the tests. If the candidate method does not include an integral strip chart recorder...

76 FR 73494 - Airworthiness Directives; Turbomeca S.A. Arriel 2B Turboshaft Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... identified in the MCAI. The one-time functional test required by the service bulletin is not a normal engine run-up test: the one-time functional test involves additional requirements including mode switching, that are not part of a normal engine run-up after start. FAA's Determination and Requirements of This...

40 CFR Appendix C to Subpart B of... - SAE J2788 Standard for Recovery/Recycle and Recovery/Recycle/Recharging Equipment for HFC-134a...

Code of Federal Regulations, 2010 CFR

2010-07-01

... qualifying shall be a 1.4 kg (3.0 lbs) capacity orifice tube/accumulator system in a 2005 Chevrolet Suburban... engine/system operation for up to 15 minutes, up to 2000 rpm. 1. You must start with an empty system...

Reading Nature from a "Bottom-Up" Perspective

ERIC Educational Resources Information Center

Magntorn, Ola; Hellden, Gustav

2007-01-01

This paper reports on a study of ecology teaching and learning in a Swedish primary school class (age 10-11 yrs). A teaching sequence was designed to help students read nature in a river ecosystem. The teaching sequence had a "bottom up" approach, taking as its starting point a common key organism--the freshwater shrimp. From this…

Notification: Follow-Up Review on OIG Report No. 13-P-0178, Improvements Needed in EPA Training and Oversight for Risk Management Program Inspections

EPA Pesticide Factsheets

Project #OPE-FY15-0054, July 15, 2015. The U.S. Environmental Protection Agency (EPA) Office of Inspector General (OIG) is starting a follow-up review on the EPA’s actions to address recommendations in the subject report, issued March 21, 2013.

40 CFR 53.21 - Test conditions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 6 2014-07-01 2014-07-01 false Test conditions. 53.21 Section 53.21... Methods for SO2, CO, O3, and NO2 § 53.21 Test conditions. (a) Set-up and start-up of the test analyzer... before beginning the tests. The test procedures assume that the test analyzer has a conventional analog...

Deconstructing Afghanistan: How Does America’s Past Inform Afghanistan’s Future?

DTIC Science & Technology

2015-01-01

Security Assistance In 1865 and 2002 the US government sought a minimalist role for its mili- tary, but in each case, military responsibilities...October 2012. Consequently, the ANSF assumed security responsibilities for 87 percent of the Afghan population by the start of 2013, though the...cluded a paltry $9 million in cash, provided by the UN start -up fund.2 The physical destruction and psychological exhaustion of war proved far more

Improved Timing Scheme for Spaceborne Precipitation Radar

NASA Technical Reports Server (NTRS)

Berkun, Andrew; Fischman, Mark

2004-01-01

An improved timing scheme has been conceived for operation of a scanning satellite-borne rain-measuring radar system. The scheme allows a real-time-generated solution, which is required for auto targeting. The current timing scheme used in radar satellites involves pre-computing a solution that allows the instrument to catch all transmitted pulses without transmitting and receiving at the same time. Satellite altitude requires many pulses in flight at any time, and the timing solution to prevent transmit and receive operations from colliding is usually found iteratively. The proposed satellite has a large number of scanning beams each with a different range to target and few pulses per beam. Furthermore, the satellite will be self-targeting, so the selection of which beams are used will change from sweep to sweep. The proposed timing solution guarantees no echo collisions, can be generated using simple FPGA-based hardware in real time, and can be mathematically shown to deliver the maximum number of pulses per second, given the timing constraints. The timing solution is computed every sweep, and consists of three phases: (1) a build-up phase, (2) a feedback phase, and (3) a build-down phase. Before the build-up phase can begin, the beams to be transmitted are sorted in numerical order. The numerical order of the beams is also the order from shortest range to longest range. Sorting the list guarantees no pulse collisions. The build-up phase begins by transmitting the first pulse from the first beam on the list. Transmission of this pulse starts a delay counter, which stores the beam number and the time delay to the beginning of the receive window for that beam. The timing generator waits just long enough to complete the transmit pulse plus one receive window, then sends out the second pulse. The second pulse starts a second delay counter, which stores its beam number and time delay. This process continues until an output from the first timer indicates there is less than one transmit pulse width until the start of the next receive event. This blocks future transmit pulses in the build-up phase. The feedback phase begins with the first timer paying off and starting the first receive window. When the first receive window is complete, the timing generator transmits the next beam from the list. When the second timer pays off, the second receive event is started. Following the second receive event, the timing generator will transmit the next beam on the list and start an additional timer. The timers work in a circular buffer fashion so there only need to be enough to cover the maximum number of echoes in flight.

Integration of MODIS-derived metrics to assess interannual variability in snowpack, lake ice, and NDVI in southwest Alaska

USGS Publications Warehouse

Reed, Bradley C.; Budde, Michael E.; Spencer, Page; Miller, Amy E.

2009-01-01

Impacts of global climate change are expected to result in greater variation in the seasonality of snowpack, lake ice, and vegetation dynamics in southwest Alaska. All have wide-reaching physical and biological ecosystem effects in the region. We used Moderate Resolution Imaging Spectroradiometer (MODIS) calibrated radiance, snow cover extent, and vegetation index products for interpreting interannual variation in the duration and extent of snowpack, lake ice, and vegetation dynamics for southwest Alaska. The approach integrates multiple seasonal metrics across large ecological regions. Throughout the observation period (2001-2007), snow cover duration was stable within ecoregions, with variable start and end dates. The start of the lake ice season lagged the snow season by 2 to 3??months. Within a given lake, freeze-up dates varied in timing and duration, while break-up dates were more consistent. Vegetation phenology varied less than snow and ice metrics, with start-of-season dates comparatively consistent across years. The start of growing season and snow melt were related to one another as they are both temperature dependent. Higher than average temperatures during the El Ni??o winter of 2002-2003 were expressed in anomalous ice and snow season patterns. We are developing a consistent, MODIS-based dataset that will be used to monitor temporal trends of each of these seasonal metrics and to map areas of change for the study area.

Agile methodology selection criteria: IT start-up case study

NASA Astrophysics Data System (ADS)

Micic, Lj

2017-05-01

Project management in modern IT companies is often based on agile methodologies which have several advantages compared to traditional methodologies such is waterfall. Having in mind that clients sometimes change project during development it is crucial for an IT company to choose carefully which methodology is going to implement and is it going to be mostly based on one or is it going got be combination of several. There are several modern and often used methodologies but among those Scrum, Kanban and XP programming are usually the most common. Sometimes companies use mostly tools and procedures from one but quite often they use some of the combination of those methodologies. Having in mind that those methodologies are just a framework they allow companies to adapt it for their specific projects as well as for other limitations. These methodologies are in limited usage Bosnia but more and more IT companies are starting to use agile methodologies because it is practice and common not just for their clients abroad but also starting to be the only option in order to deliver quality product on time. However it is always challenging which methodology or combination of several companies should implement and how to connect it to its own project, organizational framework and HR management. This paper presents one case study based on local IT start up and delivers solution based on theoretical framework and practical limitations that case company has.

24 CFR 3285.904 - Utility system connections.

Code of Federal Regulations, 2010 CFR

2010-04-01

... come loose during transit. (4) Gas appliance start-up procedures. The LAHJ should be consulted... valves, lighting pilot lights when provided, and adjusting burners and spark igniters for automatic...

Do You Trust Your Phone?

NASA Astrophysics Data System (ADS)

Castiglione, Aniello; de Prisco, Roberto; de Santis, Alfredo

Despite the promising start, Electronic Commerce has not taken off mostly because of security issues with the communication infrastructures that are popping up threateningly undermining the perceived trustworthiness in Electronic Commerce.

Business management for biodiesel producers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerpen, Jon Van

2004-07-01

The material in this book is intended to provide the reader with information about the biodiesel and liquid fuels industry, biodiesel start-up issues, legal and regulatory issues, and operational concerns.

Reduction of Harmful Emissions During Start and Warming Up of the Engine

NASA Astrophysics Data System (ADS)

Volkov, N.; Chainikov, D.

2018-01-01

The question of decrease in harmful emissions when idling of a truck engine in the conditions of low temperatures is considered. The implementation of the thermogenerator for a power supply of electrical elements is offered in a design of the self-powered heater. The principle of the device operation is based on a thermoelectric effect at which there is heat absorption and thermo-EMF emergence. In a consequence of this process electricity is produced. The exhaust gases of the self-powered heater are the source of the absorbed heat and act as fuel for the thermogenerator. It allows developing energy for a power supply of electrical elements of the heater. It gives the chance not to start the engine for warming up during the long parking, thereby reducing harmful emissions.

Evaluation of in-situ thermal energy storage for lunar based solar dynamic systems

NASA Technical Reports Server (NTRS)

Crane, Roger A.

1991-01-01

A practical lunar based thermal energy storage system, based on locally available materials, could significantly reduce transportation requirements and associated costs of a continuous, solar derived power system. The concept reported here is based on a unique, in-situ approach to thermal energy storage. The proposed design is examined to assess the problems of start-up and the requirements for attainment of stable operation. The design remains, at this stage, partially conceptional in nature, but certain aspects of the design, bearing directly on feasibility, are examined in some detail. Specifically included is an engineering evaluation of the projected thermal performance of this system. Both steady state and start-up power requirements are evaluated and the associated thermal losses are evaluated as a basis for establishing potential system performance.

From unmet clinical need to entrepreneurship: taking your informatics solution to market.

PubMed

Bowles, Kathryn H; Heil, Eric

2014-01-01

This paper will describe the process for taking a decision support solution to market as a start-up business. The nurse inventor and Co-Founder of RightCare Solutions, Inc. will share the steps from answering a clinical question, to registering an invention, creating a business plan and company, obtaining venture funding, and launching a commercial product. We will share positives about the experience such as how to get start-up funds, gaining national exposure and access to an excellent team, disseminating your work broadly, further enhancing the product, and obtaining equity, and financial rewards. We will discuss cons such as losing control, dilution of ownership, and conflict of interest. This paper will encourage nurse informaticians to think differently and learn about the steps in the process from an experienced team.

User-centered ecotourism development.

PubMed

Talsma, L; Molenbroek, J F M

2012-01-01

The transfer of knowledge in an ecotourism project is never a one-way affair. An approach connected to bottom-up development is the submersion into another culture, while creating a new organizational structure. For co-creation, patterns that are often latent, such as leadership roles, the association with business, or even the color of education can be revealed by carefully facilitated brainstorms or workshops. Especially in countries with a different hierarchical structure, such as Indonesia compared to Holland, a careful analysis is needed before starting cooperation. Although a case is only a temporary view on a situation and not a guarantee for a truly sustainable system, the bottom-up approach tested has interesting starting points for an ecotourism system. Two cases were conducted in Bali, Indonesia, which resulted in guidelines on how to approach user-centered ecotourism development.

Digital control for the condensate system in a combined cycle power plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanchez Parra, M.; Fuentes Gutierrez, J.E.; Castelo Cuevas, L.

1994-12-31

This paper presents the highlights by means of which development, installation and start up of the digital control system (DCS)for the condenser and hotwell (condensate system) were performed. This system belongs to the distributed control system installed by the Instituto de Investigaciones Electricas (IIE) at the Combined Cycle Power Plant in Gomez Palacio (GP), Durango, Mexico, during the February-March period, in 1993. The main steps for development of the condenser and hotwell control system include: process modeling, definition of control strategies, algorithms, design and software development, PC simulation tests, laboratory tests with an equipment similar to the one installed atmore » the GP Power Plant, installation, and finally, start up, which was a joint effort with the GP Power Plant engineering staff.« less

The effects of Tulsa's CAP Head Start program on middle-school academic outcomes and progress.

PubMed

Phillips, Deborah; Gormley, William; Anderson, Sara

2016-08-01

This study presents evidence pertinent to current debates about the lasting impacts of early childhood educational interventions and, specifically, Head Start. A group of students who were first studied to examine the immediate impacts of the Tulsa, Oklahoma, Community Action Project (CAP) Head Start program were followed-up in middle school, primarily as 8th graders. Using ordinary least squares and logistic regressions with a rich set of controls and propensity score weighting models to account for differential selection into Head Start, we compared students who had attended the CAP Head Start program and enrolled in the Tulsa Public Schools (TPS) as kindergarteners with children who also attended TPS kindergarten but had attended neither CAP Head Start nor the TPS pre-K program as 4-year-olds. CAP Head Start produced significant positive effects on achievement test scores in math and on both grade retention and chronic absenteeism for middle-school students as a whole; positive effects for girls on grade retention and chronic absenteeism; for white students on math test scores; for Hispanic students on math test scores and chronic absenteeism, and for students eligible for free lunches on math test scores, grade retention, and chronic absenteeism. We conclude that the Tulsa CAP Head Start program produced significant and consequential effects into the middle school years. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

A Low-Erosion Starting Technique for High-Performance Arcjets

NASA Technical Reports Server (NTRS)

Sankovic, John M.; Curran, Francis M.

1994-01-01

The NASA arcjet program is currently sponsoring development of high specific impulse thrusters for next generation geosynchronous communications satellites (2 kW-class) and low-power arcjets for power limited spacecraft (approx. 0.5 kW-class). Performance goals in both of these efforts will require up to 1000 starts at propellant mass flow rates significantly below those used in state-of-the-art arcjet thruster systems (i.e., high specific power levels). Reductions in mass flow rate can lead to damaging modes of operation, particularly at thruster ignition. During the starting sequence, the gas dynamic force due to low propellant flow is often insufficient to rapidly push the arc anode attachment to its steady-state position in the diverging section of the nozzle. This paper describes the development and demonstration of a technique which provides for non-damaging starts at low steady-state flow rates. The technique employs a brief propellant pressure pulse at ignition to increase gas dynamic forces during the critical ignition/transition phase of operation. Starting characteristics obtained using both pressure-pulsed and conventional starting techniques were compared across a wide range of propellant flow rates. The pressure-pulsed starting technique provided reliable starts at mass flow rates down to 21 mg/s, typically required for 700 s specific impulse level operation of 2 kW thrusters. Following the comparison, a 600 start test was performed across a wide flow rate range. Post-test inspection showed minimal erosion of critical arcjet anode/nozzle surfaces.

Timing Is Everything.

ERIC Educational Resources Information Center

Brunner, Patrick M.; Shelley, Kevin D.

2001-01-01

In school construction projects a great deal of work and planning needs to happen before ground breaking starts. Lists consistent factors that should always be considered when setting up a facility-design timeline. (MLF)

The Use of Saxagliptin in People with Type 2 Diabetes in France: The Diapazon Epidemiological Study.

PubMed

Balkau, Beverley; Charbonnel, Bernard; Penfornis, Alfred; Chraibi, Nora; Lahouegue, Amir; Faure, Céline; Thomas-Delecourt, Florence; Detournay, Bruno

2017-10-01

Saxagliptin is a potent, reversible inhibitor of dipeptidyl peptidase-4 that is indicated for the treatment of type 2 diabetes. The DIAPAZON study was a multicenter observational study intended to document the effectiveness, safety and patterns of saxagliptin use in France, including the saxagliptin retention rate, over 2 years of follow-up. A geographically representative sample of 304 French physicians (general practitioners and specialist endocrinologists or diabetologists) recruited 1131 adults with type 2 diabetes into an ambispective cohort; 1033 fulfilled the inclusion criteria. All had started saxagliptin during the previous 6 months or at study inclusion, and follow-up was for 24 ± 3 months after starting saxagliptin. The mean age of the study population when starting saxagliptin was 61 years, and the mean HbA1c level was 8.0%; 79% had an HbA1c level ≥7%. Prior to starting saxagliptin treatment, most participants (91%) were receiving treatment with oral glucose-lowering drugs alone. The most commonly prescribed regimen at starting saxagliptin (53% of participants) was a combination of saxagliptin and metformin. The overall saxagliptin retention rate at 2 years was 79%, as estimated by the Kaplan-Meier method. The most common reasons for discontinuation were inadequate glycemic control (52%) and intolerance (22%). During the course of the study, the mean HbA1c level decreased to 7.0%, and the percentage of people with HbA1c <7% increased from 21% to 49%. The mean change in body weight was -1.8 kg. A total of 294 hypoglycemic episodes were reported in 70 participants (6.8%) during the follow-up period. Of these, 143 episodes in 41 participants (4.0%) occurred when saxagliptin was used in combination with agents associated with hypoglycemia, such as insulin, sulfonylureas or glinides. Saxagliptin is efficacious and well tolerated in a real-world practice setting, with almost 80% of participants remaining on treatment after 2 years. AstraZeneca, France.

Outcomes of antiretroviral treatment programmes in rural Lesotho: health centres and hospitals compared

PubMed Central

Labhardt, Niklaus Daniel; Keiser, Olivia; Sello, Motlalepula; Lejone, Thabo Ishmael; Pfeiffer, Karolin; Davies, Mary-Ann; Egger, Matthias; Ehmer, Jochen; Wandeler, Gilles

2013-01-01

Introduction Lesotho was among the first countries to adopt decentralization of care from hospitals to nurse-led health centres (HCs) to scale up the provision of antiretroviral therapy (ART). We compared outcomes between patients who started ART at HCs and hospitals in two rural catchment areas in Lesotho. Methods The two catchment areas comprise two hospitals and 12 HCs. Patients ≥16 years starting ART at a hospital or HC between 2008 and 2011 were included. Loss to follow-up (LTFU) was defined as not returning to the facility for ≥180 days after the last visit, no follow-up (no FUP) as not returning after starting ART, and retention in care as alive and on ART at the facility. The data were analysed using logistic regression, competing risk regression and Kaplan-Meier methods. Multivariable analyses were adjusted for sex, age, CD4 cell count, World Health Organization stage, catchment area and type of ART. All analyses were stratified by gender. Results Of 3747 patients, 2042 (54.5%) started ART at HCs. Both women and men at hospitals had more advanced clinical and immunological stages of disease than those at HCs. Over 5445 patient-years, 420 died and 475 were LTFU. Kaplan-Meier estimates for three-year retention were 68.7 and 69.7% at HCs and hospitals, respectively, among women (p=0.81) and 68.8% at HCs versus 54.7% at hospitals among men (p<0.001). These findings persisted in adjusted analyses, with similar retention at HCs and hospitals among women (odds ratio (OR): 0.89, 95% confidence interval (CI): 0.73–1.09) and higher retention at HCs among men (OR: 1.53, 95% CI: 1.20–1.96). The latter result was mainly driven by a lower proportion of patients LTFU at HCs (OR: 0.68, 95% CI: 0.51–0.93). Conclusions In rural Lesotho, overall retention in care did not differ significantly between nurse-led HCs and hospitals. However, men seemed to benefit most from starting ART at HCs, as they were more likely to remain in care in these facilities compared to hospitals. PMID:24267671

Outcomes of antiretroviral treatment programmes in rural Lesotho: health centres and hospitals compared.

PubMed

Labhardt, Niklaus Daniel; Keiser, Olivia; Sello, Motlalepula; Lejone, Thabo Ishmael; Pfeiffer, Karolin; Davies, Mary-Ann; Egger, Matthias; Ehmer, Jochen; Wandeler, Gilles

2013-11-21

Lesotho was among the first countries to adopt decentralization of care from hospitals to nurse-led health centres (HCs) to scale up the provision of antiretroviral therapy (ART). We compared outcomes between patients who started ART at HCs and hospitals in two rural catchment areas in Lesotho. The two catchment areas comprise two hospitals and 12 HCs. Patients ≥16 years starting ART at a hospital or HC between 2008 and 2011 were included. Loss to follow-up (LTFU) was defined as not returning to the facility for ≥180 days after the last visit, no follow-up (no FUP) as not returning after starting ART, and retention in care as alive and on ART at the facility. The data were analysed using logistic regression, competing risk regression and Kaplan-Meier methods. Multivariable analyses were adjusted for sex, age, CD4 cell count, World Health Organization stage, catchment area and type of ART. All analyses were stratified by gender. Of 3747 patients, 2042 (54.5%) started ART at HCs. Both women and men at hospitals had more advanced clinical and immunological stages of disease than those at HCs. Over 5445 patient-years, 420 died and 475 were LTFU. Kaplan-Meier estimates for three-year retention were 68.7 and 69.7% at HCs and hospitals, respectively, among women (p=0.81) and 68.8% at HCs versus 54.7% at hospitals among men (p<0.001). These findings persisted in adjusted analyses, with similar retention at HCs and hospitals among women (odds ratio (OR): 0.89, 95% confidence interval (CI): 0.73-1.09) and higher retention at HCs among men (OR: 1.53, 95% CI: 1.20-1.96). The latter result was mainly driven by a lower proportion of patients LTFU at HCs (OR: 0.68, 95% CI: 0.51-0.93). In rural Lesotho, overall retention in care did not differ significantly between nurse-led HCs and hospitals. However, men seemed to benefit most from starting ART at HCs, as they were more likely to remain in care in these facilities compared to hospitals.

Simple descriptive missing data indicators in longitudinal studies with attrition, intermittent missing data and a high number of follow-ups.

PubMed

Wærsted, Morten; Børnick, Taran Svenssen; Twisk, Jos W R; Veiersted, Kaj Bo

2018-02-13

Missing data in longitudinal studies may constitute a source of bias. We suggest three simple missing data indicators for the initial phase of getting an overview of the missingness pattern in a dataset with a high number of follow-ups. Possible use of the indicators is exemplified in two datasets allowing wave nonresponse; a Norwegian dataset of 420 subjects examined at 21 occasions during 6.5 years and a Dutch dataset of 350 subjects with ten repeated measurements over a period of 35 years. The indicators Last response (the timing of last response), Retention (the number of responded follow-ups), and Dispersion (the evenness of the distribution of responses) are introduced. The proposed indicators reveal different aspects of the missing data pattern, and may give the researcher a better insight into the pattern of missingness in a study with several follow-ups, as a starting point for analyzing possible bias. Although the indicators are positively correlated to each other, potential predictors of missingness can have a different relationship with different indicators leading to a better understanding of the missing data mechanism in longitudinal studies. These indictors may be useful descriptive tools when starting to look into a longitudinal dataset with many follow-ups.

Variable Thrust, Multiple Start Hybrid Motor Solutions for Missile and Space Applications

DTIC Science & Technology

2010-06-01

considered: I. Boost/Sustain/Boost. Simulating a tactical solid rocket motor profile with another boost at the end to demonstrate a "throttle up", this...of tactical solid rocket motors were tested with 75%, 50%, and lower sustain-to- boost chamber pressure ratios with rapid throttle-up achieved... solid rocket motors were tested with 75%, 50%, and lower sustain-to-boost chamber pressure ratios with rapid throttle-up achieved following the sustain

Up, Up Up in 60 Seconds- Watch Rocket Test Stand Soar to 221-Feet Tall

NASA Image and Video Library

2017-01-09

In this 60-second time-lapse video, watch structural Test Stand 4693 at NASA's Marshall Space Flight Center rise 221 feet, from the start of construction in May 2014 to its end in December 2016. Test Stand 4693 will subject the 537,000-gallon liquid hydrogen tank of the Space Launch System's massive core stage to the same stresses and pressures it must endure at launch and in flight.

Management of Object Histories in the SWALLOW Repository,

DTIC Science & Technology

1980-07-01

time of this future version. Since the end time of the current version should not be automatically extended up to tile start time of tile token until...and T is determined by the speed with which the available online version StoraIge fills up . Unfortunately, since versions of different objects are...of these images is accessible by Illlowing tie chain of pointers in the object history. The other images use up storage, but do not have an adverse

Vibration analysis on automatic take-up device of belt conveyor

NASA Astrophysics Data System (ADS)

Qin, Tailong; Wei, Jin

2008-10-01

Through introducing application condition of belt conveyor in the modern mining industry, the paper proposed, in the dynamic course of its starting, braking or loading, it would produce moving tension and elastic wave. And analyzed the factors cause the automatic take-up device of belt conveyor vibrating: the take-up device's structure and the elastic wave. Finally the paper proposed the measure to reduce vibration and carried on the modeling and simulation on the tension buffer device.

Using Dynamic Risk and Protective Factors to Predict Inpatient Aggression: Reliability and Validity of START Assessments

PubMed Central

Desmarais, Sarah L.; Nicholls, Tonia L.; Wilson, Catherine M.; Brink, Johann

2012-01-01

The Short-Term Assessment of Risk and Treatability (START) is a relatively new structured professional judgment guide for the assessment and management of short-term risks associated with mental, substance use, and personality disorders. The scheme may be distinguished from other violence risk instruments because of its inclusion of 20 dynamic factors that are rated in terms of both vulnerability and strength. This study examined the reliability and validity of START assessments in predicting inpatient aggression. Research assistants completed START assessments for 120 male forensic psychiatric patients through review of hospital files. They additionally completed Historical-Clinical-Risk Management – 20 (HCR-20) and the Hare Psychopathy Checklist: Screening Version (PCL:SV) assessments. Outcome data was coded from hospital files for a 12-month follow-up period using the Overt Aggression Scale (OAS). START assessments evidenced excellent interrater reliability and demonstrated both predictive and incremental validity over the HCR-20 Historical subscale scores and PCL:SV total scores. Overall, results support the reliability and validity of START assessments, and use of the structured professional judgment approach more broadly, as well as the value of using dynamic risk and protective factors to assess violence risk. PMID:22250595

Effect of cotrimoxazole prophylaxis on malaria occurrence among HIV-infected adults in West Africa: the MALHIV Study.

PubMed

Eholié, Serge P; Ello, Frédéric N; Coffie, Patrick A; Héma, Arsène; Minta, Daouda K; Sawadogo, Adrien

2017-09-01

Cotrimoxazole (CTX) should be given to all HIV-infected adults with mild or severe HIV-disease or those with CD4 counts below 350/mm 3 according to 2006 WHO guidelines. We assessed the impact of CTX prophylaxis on the risk of malaria episodes in HIV-1-infected adults from four West African countries with different patterns of malaria transmission. Multicentric cohort study, conducted between September 2007 and March 2010 in four West African cities. Antiretroviral therapy (ART) naïve HIV-infected adults started CTX at enrolment (CTX group) if they had CD4 < 350 cells/mm 3 or were at WHO clinical stage ≥2. For patients who did not start CTX at enrolment (non-CTX group) and started CTX afterwards, follow-up was censored at CTX initiation. We used Cox's proportional hazard model to compare the risk of malaria between CTX groups. A total of 514 participants (median CD4 count 238 cells/mm 3 ) were followed for a median of 15 months. At enrolment, 347 started CTX, and 261 started ART. During the follow-up, 28 started CTX. The incidence of malaria was 8.7/100 PY (95%CI 6.3-11.5) overall, 5.2/100 PY (95%CI 3.1-8.3) in the CTX group and 15.5/100 PY (95%CI 10.3-22.1) in the non-CTX group. In multivariate analysis, CTX led to a 69% reduction in the risk of malaria (aHR 0.31, 95%CI 0.10-0.90). Patients in the CTX group had an adjusted risk of malaria three times lower than those in the non-CTX group. The prolonged large-scale use of CTX did not blunt the efficacy of CTX to prevent malaria in this region. © 2017 John Wiley & Sons Ltd.

Validation of the Risk Prediction Models STATE-Score and START-Strategy to Guide TACE Treatment in Patients with Hepatocellular Carcinoma.

PubMed

Mähringer-Kunz, Aline; Kloeckner, Roman; Pitton, Michael B; Düber, Christoph; Schmidtmann, Irene; Galle, Peter R; Koch, Sandra; Weinmann, Arndt

2017-07-01

Several scoring systems that guide patients' treatment regimen for transarterial chemoembolization (TACE) of hepatocellular carcinoma (HCC) have been introduced, but none have gained widespread acceptance in clinical practice. The purpose of this study is to externally validate the Selection for TrAnsarterial chemoembolization TrEatment (STATE)-score and START-strategy [i.e., sequential use of the STATE-score and Assessment for Retreatment with TACE (ART)-score]. From January 2000 to September 2015, 933 patients with HCC underwent TACE at our institution. All variables needed to calculate the STATE-score and implement the START-strategy were determined. STATE comprised serum albumin, up-to-seven criteria, and C-reactive protein (CRP). ART comprised an increase in aspartate aminotransferase, the Child-Pugh score, and a radiological tumor response. Overall survival was calculated, and multivariate analysis performed. In addition, the STATE-score and START-strategy were validated using the Harrell's C-index and integrated Brier score (IBS). The STATE-score was calculated in 228 patients. Low and high STATE-scores corresponded to median survival of 14.3 and 20.2 months, respectively. Harrell's C was 0.558 and IBS 0.133. For the STATE-score, significant predictors of survival were up-to-seven criteria (p = 0.006) and albumin (p = 0.022). CRP values were not predictive (p = 0.367). The ART-score was calculated in 207 patients. Combining the STATE-score and ART-score led to a Harrell's C of 0.580 and IBS of 0.132. The STATE-score was unable to reliably determine the suitability for initial TACE. The START-strategy only slightly improved the predictive ability compared to the ART-score alone. Therefore, neither the STATE-score nor START-strategy alone provides sufficient certainty for clear-cut clinical decisions.

A little help from the crowd

NASA Astrophysics Data System (ADS)

Cartwright, Jon

2014-11-01

Whether they need start-up capital to fund an innovation or some novel research, physicists the world over are turning to crowdfunding websites to support their next projects, as Jon Cartwright reports.

The Pollution Solution.

ERIC Educational Resources Information Center

Stephens, Lillian

1981-01-01

Presented are methods to help teachers continue the environmental awareness programs they have already started by providing up-to-date information and activities dealing with air pollution, water pollution, and solid waste disposal. (Author/KC)

Diabetes Prevention Program (DPP)

MedlinePlus

... mass index of 35 or higher. DPP Study Design The DPP was a randomized, controlled clinical trial ... by several earlier small-scale studies. DPPOS Study Design The DPPOS follow-up study started in 2002. ...

77 FR 65607 - Internal Revenue Service

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-29

... Form 720 returns a systemic way to order additional tax forms and informational publications. Current... forms of information technology; and (e) estimates of capital or start-up costs and costs of operation...

The Army of Zimbabwe: A Role Model for Namibia

DTIC Science & Technology

1990-03-02

centuries. A limited sense of nationhood started to exist. Further south on the African continent Zulu dissidents broke from the main empire and in...important role. 13 One of the manifestations of this unity would emerge in the creation of the new Zimbabwe Defense Forces. 6 ENDNOTES 1. DA PAM 550-171...prove to be very helpful in the months to come, 25 as BMATT arrived, set up, came on line and started its difficult mission. The creation of the first

The Marine Corps Operating Concept: How an Expeditionary Force Operates in the 21st Century

DTIC Science & Technology

2016-09-01

Moderator: Capt Pierce, you were a company commander on the MEU. How did OLR start for you? Well, up to the point that the enemy started crossing the...came in fast from long range on small boats. Worst beaches you’ve ever seen. Windward side, rocks everywhere, shoving boats in between the breakers...While the landing force didn’t get ashore unscathed, they mitigated the damage by using numerous small landing sites and emphasizing speed and

Minto, Alaska Lakeview Lodge START Program Weatherization and Rehab Project Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Titus, Bessie; Messier, Dave

This report details the process that Minto Village Council undertook during the DOE sponsored START program and the work that was completed on the main energy consumer in the community, the Minto Lakeview Lodge. The report takes a look at the steps leading up to the large weatherization and renovation project, the work the was completed as a result of the funding and the results in terms of effect on the community and real energy savings.

Adaptation of Methanogenic Inocula to Anaerobic Digestion of Maize Silage

PubMed Central

Wojcieszak, Martyna; Pyzik, Adam; Poszytek, Krzysztof; Krawczyk, Pawel S.; Sobczak, Adam; Lipinski, Leszek; Roubinek, Otton; Palige, Jacek; Sklodowska, Aleksandra; Drewniak, Lukasz

2017-01-01

A well-balanced microbial consortium is crucial for efficient biogas production. In turn, one of a major factor that influence on the structure of anaerobic digestion (AD) consortium is a source of microorganisms which are used as an inoculum. This study evaluated the influence of inoculum sources (with various origin) on adaptation of a biogas community and the efficiency of the biomethanization of maize silage. As initial inocula for AD of maize silage the samples from: (i) an agricultural biogas plant (ABP) which utilizes maize silage as a main substrate, (ii) cattle slurry (CS), which contain elevated levels of lignocelluloses materials, and (iii) raw sewage sludge (RSS) with low content of plant origin materials were used. The adaptation of methanogenic consortia was monitored during a series of passages, and the functionality of the adapted consortia was verified through start-up operation of AD in two-stage reactors. During the first stages of the adaptation phase, methanogenic consortia occurred very slowly, and only after several passages did the microbial community adapts to allow production of biogas with high methane content. The ABP consortium revealed highest biogas production in the adaptation and in the start-up process. The biodiversity dynamics monitored during adaptation and start-up process showed that community profile changed in a similar direction in three studied consortia. Native communities were very distinct to each other, while at the end of the Phase II of the start-up process microbial diversity profile was similar in all consortia. All adopted bacterial communities were dominated by representatives of Porphyromonadaceae, Rikenellaceae, Ruminococcaceae, and Synergistaceae. A shift from low acetate-preferring acetoclastic Methanosaetaceae (ABP and RSS) and/or hydrogenotrophic Archaea, e.g., Methanomicrobiaceae (CS) prevailing in the inoculum samples to larger populations of high acetate-preferring acetoclastic Methanosarcinaceae was observed by the end of the experiment. As a result, three independent, functional communities that syntrophically produced methane from acetate (primarily) and H2/CO2, methanol and methylamines were adapted. This study provides new insights into the specific process by which different inocula sampled from typical methanogenic environments that are commonly used to initiate industrial installations gradually adapted to allow biogas production from maize silage. PMID:29033919

Estimating Loss to Follow-Up in HIV-Infected Patients on Antiretroviral Therapy: The Effect of the Competing Risk of Death in Zambia and Switzerland

PubMed Central

Mwango, Albert; Stringer, Jeffrey; Ledergerber, Bruno; Mulenga, Lloyd; Bucher, Heiner C.; Westfall, Andrew O.; Calmy, Alexandra; Boulle, Andrew; Chintu, Namwinga; Egger, Matthias; Chi, Benjamin H.

2011-01-01

Background Loss to follow-up (LTFU) is common in antiretroviral therapy (ART) programmes. Mortality is a competing risk (CR) for LTFU; however, it is often overlooked in cohort analyses. We examined how the CR of death affected LTFU estimates in Zambia and Switzerland. Methods and Findings HIV-infected patients aged ≥18 years who started ART 2004–2008 in observational cohorts in Zambia and Switzerland were included. We compared standard Kaplan-Meier curves with CR cumulative incidence. We calculated hazard ratios for LTFU across CD4 cell count strata using cause-specific Cox models, or Fine and Gray subdistribution models, adjusting for age, gender, body mass index and clinical stage. 89,339 patients from Zambia and 1,860 patients from Switzerland were included. 12,237 patients (13.7%) in Zambia and 129 patients (6.9%) in Switzerland were LTFU and 8,498 (9.5%) and 29 patients (1.6%), respectively, died. In Zambia, the probability of LTFU was overestimated in Kaplan-Meier curves: estimates at 3.5 years were 29.3% for patients starting ART with CD4 cells <100 cells/µl and 15.4% among patients starting with ≥350 cells/µL. The estimates from CR cumulative incidence were 22.9% and 13.6%, respectively. Little difference was found between naïve and CR analyses in Switzerland since only few patients died. The results from Cox and Fine and Gray models were similar: in Zambia the risk of loss to follow-up and death increased with decreasing CD4 counts at the start of ART, whereas in Switzerland there was a trend in the opposite direction, with patients with higher CD4 cell counts more likely to be lost to follow-up. Conclusions In ART programmes in low-income settings the competing risk of death can substantially bias standard analyses of LTFU. The CD4 cell count and other prognostic factors may be differentially associated with LTFU in low-income and high-income settings. PMID:22205933

How To Set Up Your Own Small Business. Volumes I-II and Overhead Transparencies.

ERIC Educational Resources Information Center

Fallek, Max

This two-volume textbook and collection of overhead transparency masters is intended for use in a course in setting up a small business. The following topics are covered in the first volume: getting off to a good start, doing market research, forecasting sales, financing a small business, understanding the different legal needs of different types…

Beginning Postsecondary Students Longitudinal Study: First Follow-Up 1996-98 (BPS:96/98) Methodology Report. Technical Report.

ERIC Educational Resources Information Center

Wine, Jennifer S.; Whitmore, Roy W.; Heuer, Ruth E.; Biber, Melissa; Pratt, Daniel J.

This report describes the methods and procedures used for the full-scale data collection effort of the Beginning Postsecondary Students Longitudinal Study First Follow-Up 1996-98 (BPS:96/98). These students, who started their postsecondary education during the 1995-96 academic year, were first interviewed during 1996 as part of the National…

Unlocking Student Data Could Lead to "App Economy" for Colleges: Colleges Are Pressured to Open Up Student Data

ERIC Educational Resources Information Center

DeSantis, Nick

2012-01-01

College campuses are hothouses of data, including course schedules, degree requirements, and grades. But much of the information remains spread out across software systems or locked on university servers. Start-up companies want to pry the information loose from campus servers in order to offer personalized services that could transform the…

76 FR 50477 - Notice of Availability of the Final Environmental Impact Statement for a Proposed Federal Loan...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-15

... consist of: a solar field of approximately nine million ground-mounted PV modules, within up to 460 PV... Statement for a Proposed Federal Loan Guarantee To Support Construction and Start-up of the Topaz Solar Farm... for Construction and Startup of the Topaz Solar Farm, San Luis Obispo County, California (DOE/EIS-0458...

Wearable Wireless Sensor for Multi-Scale Physiological Monitoring

DTIC Science & Technology

2013-10-01

AD_________________ Award Number: W81XWH-12-1-0541 TITLE: Wearable Wireless Sensor for Multi-Scale...TYPE Annual 3. DATES COVERED 25 12- 13 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Wearable Wireless Sensor for Multi-Scale Physiological...peripheral management • Procedures for low power mode activation and wake - up • Routines for start- up state detection • Flash memory management

Struggling for Integration: Universalist and Separatist Discourses within El Sistema Sweden

ERIC Educational Resources Information Center

Bergman, Åsa; Lindgren, Monica; Saether, Eva

2016-01-01

This article focuses on the El Sistema programme, which started up in Sweden in 2010 with the objective to deal with segregation problems typical for Swedish urban areas. The purpose of the article is to examine how promoting integration through music and music education is constructed within El Sistema as a way to help children growing up in…

SNAP 10A FS-3 reactor performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hawley, J.P.; Johnson, R.A.

1966-08-15

SNAP 10FS-3 was the first flight-qualified SNAP reactor system to be operated in a simulated space environment. Prestart-up qualification testing, automatic start-up, endurance period performance, extended operation test and reactor shutdown are described as they affected, or were affected by, overall reactor performance. Performance of the reactor control system and the diagnostic instrumentation is critically evaluted.

Starting Up a Company in a Mature Market: Wise or Foolish ?

NASA Astrophysics Data System (ADS)

Biberger, Maximilian

SDCmaterials, Inc. (SDC) is a venture backed, mature start up in the automotive sector. Moreover: Catalytic Converters for vehicles and stationary applications. The company has invented and developed environmentally friendly, novel materials as well as material integration techniques for catalytic converters based on a proprietary and patented nanotechnology. Traditionally catalysts require large amounts of PGMs (Platinum Group Metals), more than USD 10B per year, in order to treat vehicle emissions. Due to that, the catalytic converter is the single most expensive piece part in a vehicle. The currently used technologies have served the industry well. However, as emission standards dramatically tighten, particularly in China, the demand for more fuel efficient and Hybrid vehicles increases, this technology begins to start showing limitations as it can meet the aforementioned demands only by increasing the PGM amount per vehicle. This in turn will increase the cost per vehicle and / or reduce margins for the automotive industry, and in addition to that impact the environment negatively. In contrast to existing technologies, the SDC based technology can meet future emission goals by maintaining, or even reducing, the PGM amount required to treat exhaust emissions. This results in tremendous savings for the consumer and the automotive industry, as well as a significantly better stewardship of natural resources and clean manufacturing. In the present paper the pros and cons of starting a nanotechnology company in a mature market are presented. Both from a business & economics, as well as from a technology point of view. The case is made that it is possible to start a company in a mature market and that novel technologies can compete economically with 40+ old year technologies.

Orbital transfer vehicle oxygen turbopump technology. Volume 2: Nitrogen and ambient oxygen testing

NASA Technical Reports Server (NTRS)

Brannam, R. J.; Buckmann, P. S.; Chen, B. H.; Church, S. J.; Sabiers, R. L.

1990-01-01

The testing of a rocket engine oxygen turbopump using high pressure ambient temperature nitrogen and oxygen as the turbine drive gas in separate test series is discussed. The pumped fluid was liquid nitrogen or liquid oxygen. The turbopump (TPA) is designed to operate with 400 F oxygen turbine drive gas which will be demonstrated in a subsequent test series. Following bearing tests, the TPA was finish machined (impeller blading and inlet/outlet ports). Testing started on 15 February 1989 and was successfully concluded on 21 March 1989. Testing started using nitrogen to reduce the ignition hazard during initial TPA checkout. The Hydrostatic Bearing System requires a Bearing Pressurization System. Initial testing used a separate bearing supply to prevent a rubbing start. Two test series were successfully completed with the bearing assist supplied only by the pump second stage output which entailed a rubbing start until pump pressure builds up. The final test series used ambient oxygen drive and no external bearing assist. Total operating time was 2268 seconds. There were 14 starts without bearing assist and operating speeds up to 80,000 rpm were logged. Teardown examination showed some smearing of silverplated bearing surfaces but no exposure of the underlying monel material. There was no evidence of melting or oxidation due to the oxygen exposure. The articulating, self-centering hydrostatic bearing exhibited no bearing load or stability problems. The only anomaly was higher than predicted flow losses which were attributed to a faulty ring seal. The TPA will be refurbished prior to the 400 F oxygen test series but its condition is acceptable, as is, for continued operating. This was a highly successful test program.

Bipolar femoral head arthroplasty in osteoarthritis. A prospective study with a minimum 5-year follow-up period.

PubMed

Pandit, R

1996-08-01

Primary bipolar femoral head arthroplasties performed on 100 osteoarthritic hips were studied to a minimum of 5 years after surgery. All arthroplasties were performed on physically active patients. At a mean follow-up period of 5.5 years, The Hospital for Special Surgery hip scores were good to excellent in 96 hips. Transient startup soreness constituted the most frequent complaint, occurring in 34 hips. Three hips had more persistent pain localized to the acetabulum, necessitating revision to fixed sockets, which alleviated the symptoms. Four additional hips, in heavy, active men, developed polyethylene fatigue fracture and component disassembly. Acetabular migration of more than 5 mm developed in one hip. Motion, as determined radiologically, occurred primarily at the inner bearing. There were no dislocations or infections in the series. The Bateman bipolar prosthesis provides generally good results in osteoarthritic hips. The shorter operating time and the case of revision are special advantages of bipolar devices. Start-up soreness and stiffness is a shortcoming in approximately one third of cases. Component disassembly in heavy, active men is a problem and the bipolar arthroplasty should be avoided in these patients. Start-up soreness was a significant problem in particular.