Robustness of S1 statistic with Hodges-Lehmann for skewed distributions

NASA Astrophysics Data System (ADS)

Ahad, Nor Aishah; Yahaya, Sharipah Soaad Syed; Yin, Lee Ping

2016-10-01

Analysis of variance (ANOVA) is a common use parametric method to test the differences in means for more than two groups when the populations are normally distributed. ANOVA is highly inefficient under the influence of non- normal and heteroscedastic settings. When the assumptions are violated, researchers are looking for alternative such as Kruskal-Wallis under nonparametric or robust method. This study focused on flexible method, S1 statistic for comparing groups using median as the location estimator. S1 statistic was modified by substituting the median with Hodges-Lehmann and the default scale estimator with the variance of Hodges-Lehmann and MADn to produce two different test statistics for comparing groups. Bootstrap method was used for testing the hypotheses since the sampling distributions of these modified S1 statistics are unknown. The performance of the proposed statistic in terms of Type I error was measured and compared against the original S1 statistic, ANOVA and Kruskal-Wallis. The propose procedures show improvement compared to the original statistic especially under extremely skewed distribution.

Wheat crown rot pathogens Fusarium graminearum and F. pseudograminearum lack specialization.

PubMed

Chakraborty, Sukumar; Obanor, Friday; Westecott, Rhyannyn; Abeywickrama, Krishanthi

2010-10-01

This article reports a lack of pathogenic specialization among Australian Fusarium graminearum and F. pseudograminearum causing crown rot (CR) of wheat using analysis of variance (ANOVA), principal component and biplot analysis, Kendall's coefficient of concordance (W), and κ statistics. Overall, F. pseudograminearum was more aggressive than F. graminearum, supporting earlier delineation of the crown-infecting group as a new species. Although significant wheat line-pathogen isolate interaction in ANOVA suggested putative specialization when seedlings of 60 wheat lines were inoculated with 4 pathogen isolates or 26 wheat lines were inoculated with 10 isolates, significant W and κ showed agreement in rank order of wheat lines, indicating a lack of specialization. The first principal component representing nondifferential aggressiveness explained a large part (up to 65%) of the variation in CR severity. The differential components were small and more pronounced in seedlings than in adult plants. By maximizing variance on the first two principal components, biplots were useful for highlighting the association between isolates and wheat lines. A key finding of this work is that a range of analytical tools are needed to explore pathogenic specialization, and a statistically significant interaction in an ANOVA cannot be taken as conclusive evidence of specialization. With no highly resistant wheat cultivars, Fusarium isolates mostly differ in aggressiveness; however, specialization may appear as more resistant cultivars become widespread.

Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine

PubMed Central

Mortazavi, Vajihesadat; Fathi, Mohammadhosein; Ataei, Ebrahim; Khodaeian, Niloufar; Askari, Navid

2012-01-01

In this laboratory study shear bond strengths of three filled and one unfilled adhesive systems to enamel and dentine were compared. Forty-eight extracted intact noncarious human mandibular molars were randomly assigned to two groups of 24 one for bonding to enamel and the other for bonding to dentine. Buccal and lingual surfaces of each tooth were randomly assigned for application of each one of filled (Prime & Bond NT (PBNT), Optibond Solo Plus (OBSP), and Clearfil SE Bond (CSEB)) and unfilled (Single Bond (SB)) adhesive systems (n = 12). A universal resin composite was placed into the translucent plastic cylinders (3 mm in diameter and 2 mm in length) and seated against the enamel and dentine surfaces and polymerized for 40 seconds. Shear bond strength was determined using a universal testing machine, and the results were statistically analyzed using two-way ANOVA, one-way ANOVA, t-test, and Tukey HSD post hoc test with a 5% level of significance.There were no statistically significant differences in bond strength between the adhesive systems in enamel, but CSEB and SB exhibited significantly higher and lower bond strength to dentine, respectively, than the other tested adhesive systems while there were no statistically significant differences between PBNT and OBSP. PMID:23209471

Formative Use of Intuitive Analysis of Variance

ERIC Educational Resources Information Center

Trumpower, David L.

2013-01-01

Students' informal inferential reasoning (IIR) is often inconsistent with the normative logic underlying formal statistical methods such as Analysis of Variance (ANOVA), even after instruction. In two experiments reported here, student's IIR was assessed using an intuitive ANOVA task at the beginning and end of a statistics course. In both…

The use of analysis of variance procedures in biological studies

USGS Publications Warehouse

Williams, B.K.

1987-01-01

The analysis of variance (ANOVA) is widely used in biological studies, yet there remains considerable confusion among researchers about the interpretation of hypotheses being tested. Ambiguities arise when statistical designs are unbalanced, and in particular when not all combinations of design factors are represented in the data. This paper clarifies the relationship among hypothesis testing, statistical modelling and computing procedures in ANOVA for unbalanced data. A simple two-factor fixed effects design is used to illustrate three common parametrizations for ANOVA models, and some associations among these parametrizations are developed. Biologically meaningful hypotheses for main effects and interactions are given in terms of each parametrization, and procedures for testing the hypotheses are described. The standard statistical computing procedures in ANOVA are given along with their corresponding hypotheses. Throughout the development unbalanced designs are assumed and attention is given to problems that arise with missing cells.

Association Between Selenium and Malondialdehyde as an Efficient Biomarker of Oxidative Stress in Infantile Cardiac Surgery.

PubMed

de Oliveira Ulbrecht, Marlice Oliveira; Gonçalves, Daniel Araujo; Zanoni, Lourdes Zélia Garcia; do Nascimento, Valter Aragão

2018-05-12

The present work describes a method to quantify the level of oxidative stress in infantile cardiac surgery. Fifteen patients, 6 girls and 9 boys, aged between 3 months and 16 years were divided into three groups. The first group sought to quantify the oxidative stress from differing concentrations of selenium. The second group used malondialdehyde as an indicator of oxidative stress. Finally, the third group quantified oxidative stress by normalizing the selenium concentration via malondialdehyde. Blood aliquots of 1.50 ml, drawn from the radial artery, were collected and centrifuged for quantification of Se and MDA in plasma. The statistical method ANOVA was used with a 95% confidence interval to indicate significant statistical differences between the post- and pre-operative stage for each group. The concentrations of malondialdehyde were measured by using UV-Vis following the thiobarbituric acid reaction method. For quantification of selenium, the samples were submitted to assisted microwave digestion and measured by ICP OES. In the first two groups, it was not possible to affirm that selenium and malondialdehyde could be biomarkers of oxidative stress, so a statistic test (ANOVA) was performed. However, the selenium/malondialdehyde ratios in the pre-operative and post-operative stage were 2.10 ± 0.70 and 3.20 ± 0.40, respectively. The ANOVA test confirmed a statistically significant difference between the pre- and post-operative stages with p value = 0.004. Here, the ratio of selenium concentration by malondialdehyde was confirmed to be an effective parameter for demonstration and quantification of oxidative stress activity at the post-operative stage.

Lower incisor inclination regarding different reference planes.

PubMed

Zataráin, Brenda; Avila, Josué; Moyaho, Angeles; Carrasco, Rosendo; Velasco, Carmen

2016-09-01

The purpose of this study was to assess the degree of lower incisor inclination with respect to different reference planes. It was an observational, analytical, longitudinal, prospective study conducted on 100 lateral cephalograms which were corrected according to the photograph in natural head position in order to draw the true vertical plane (TVP). The incisor mandibular plane angle (IMPA) was compensated to eliminate the variation of the mandibular plane growth type with the formula "FMApx.- 25 (FMA) + IMPApx. = compensated IMPA (IMPACOM)". As the data followed normal distribution determined by the KolmogorovSmirnov test, parametric tests were used for the statistical analysis, Ttest, ANOVA and Pearson coefficient correlation test. Statistical analysis was performed using a statistical significance of p <0.05. There is correlation between TVP and NB line (NB) (0.8614), Frankfort mandibular incisor angle (FMIA) (0.8894), IMPA (0.6351), Apo line (Apo) (0.609), IMPACOM (0.8895) and McHorris angle (MH) (0.7769). ANOVA showed statistically significant differences between the means for the 7 variables with 95% confidence level, P=0.0001. The multiple range test showed no significant difference among means: APoNB (0.88), IMPAMH (0.36), IMPANB (0.65), FMIAIMPACOM (0.01), FMIATVP (0.18), TVPIMPACOM (0.17). There was correlation among all reference planes. There were statistically significant differences among the means of the planes measured, except for IMPACOM, FMIA and TVP. The IMPA differed significantly from the IMPACOM. The compensated IMPA and the FMIA did not differ significantly from the TVP. The true horizontal plane was mismatched with Frankfort plane in 84% of the sample with a range of 19°. The true vertical plane is adequate for measuring lower incisor inclination. Sociedad Argentina de Investigación Odontológica.

Analysis of repeated measurement data in the clinical trials

PubMed Central

Singh, Vineeta; Rana, Rakesh Kumar; Singhal, Richa

2013-01-01

Statistics is an integral part of Clinical Trials. Elements of statistics span Clinical Trial design, data monitoring, analyses and reporting. A solid understanding of statistical concepts by clinicians improves the comprehension and the resulting quality of Clinical Trials. In biomedical research it has been seen that researcher frequently use t-test and ANOVA to compare means between the groups of interest irrespective of the nature of the data. In Clinical Trials we record the data on the patients more than two times. In such a situation using the standard ANOVA procedures is not appropriate as it does not consider dependencies between observations within subjects in the analysis. To deal with such types of study data Repeated Measure ANOVA should be used. In this article the application of One-way Repeated Measure ANOVA has been demonstrated by using the software SPSS (Statistical Package for Social Sciences) Version 15.0 on the data collected at four time points 0 day, 15th day, 30th day, and 45th day of multicentre clinical trial conducted on Pandu Roga (~Iron Deficiency Anemia) with an Ayurvedic formulation Dhatrilauha. PMID:23930038

Preservice Teachers' Memories of Their Secondary Science Education Experiences

ERIC Educational Resources Information Center

Hudson, Peter; Usak, Muhammet; Fancovicova, Jana; Erdogan, Mehmet; Prokop, Pavol

2010-01-01

Understanding preservice teachers' memories of their education may aid towards articulating high-impact teaching practices. This study describes 246 preservice teachers' perceptions of their secondary science education experiences through a questionnaire and 28-item survey. ANOVA was statistically significant about participants' memories of…

An investigation of thermal changes of various permanent dental cements.

PubMed

Duymus, Zeynep Yesil; Yilmaz, Baykal; Karaalioglu, F Osman

2009-05-01

The aim of this study was to investigate and compare the temperature rises which occurred during the setting reactions of different permanent cements used to lute fixed partial prosthodontics. In this study, four cements were used. They were mixed in three different proportions: according to manufacturers' recommendations, at doubled powder ratio, and at doubled liquid ratio. With a thermocouple, the temperature rises which occurred during the setting reactions were measured. For each proportion, the measurement was repeated five times such that a total of 60 measurements were done for the four different cements. Data were analyzed using analysis of variance (ANOVA). ANOVA results showed that cement type and the interaction between cement type and the powder-liquid ratio were statistically significant factors (p<0.001). Similarly, the powder-liquid ratio was a statistically significant (p<0.01) factor. Among the dental cements tested, zinc phosphate cement showed the highest temperature rise during setting reaction, whereas glass ionomer cement showed the lowest.

Comparison of central corneal thickness measurements using ultrasound pachymetry, ultrasound biomicroscopy, and the Artemis-2 VHF scanner in normal eyes

PubMed Central

Al-Farhan, Haya M; Al-Otaibi, Wafa’a Majed

2012-01-01

Purpose To compare the precision of central corneal thickness (CCT) measurements taken with the handheld ultrasound pachymeter (USP), ultrasound biomicroscopy (UBM), and the Artemis-2 very high frequency ultrasound scanner (VHFUS) on normal subjects. Design Prospective study. Methods One eye from each of 61 normal subjects was randomly selected for this study. The measurements of the CCT were taken with the USP, VHFUS, and UBM. Results were compared statistically using repeated-measures analysis of variance (ANOVA), Pearson’s correlation coefficient, and limits of agreement. Results The average CCT (± standard deviation) was 530.1 ± 30.5 μm, 554.9 ± 31.7 μm, and 559.5 ± 30.7 μm for UBM, VHFUS, and USP respectively. The intraobserver repeatability analyses of variance are not significant for USP, UBM, and VHFUS. P-values were 0.17, 0.19, and 0.37 respectively. Repeated-measures ANOVA showed a significant difference between the three different methods of measuring CCT (P = 0.0001). The ANOVA test revealed no statistically significant difference between USP and VHFUS (P > 0.05), yet statistical significant differences with UBM versus USP and UBM versus VHFUS (P < 0.001). There were high correlations between the three instruments (P < 0.0001). The mean differences (and upper/lower limits of agreement) for CCT measurements were 29.4 ± 14.3 (2.7/56), 4.6 ± 8.6 (−14.7/23.8), and −24.8 ± 13.1 (−50.4/0.8) for USP versus UBM, USP versus VHFUS, and UBM versus VHFUS, respectively. Conclusion The UBM produces CCT measurements that vary significantly from those returned by the USP and the VHFUS, suggesting that the UBM may not be used interchangeably with either equipment for monitoring the CCT in the clinical setting. PMID:22848145

On statistical analysis of factors affecting anthocyanin extraction from Ixora siamensis

NASA Astrophysics Data System (ADS)

Mat Nor, N. A.; Arof, A. K.

2016-10-01

This study focused on designing an experimental model in order to evaluate the influence of operative extraction parameters employed for anthocyanin extraction from Ixora siamensis on CIE color measurements (a*, b* and color saturation). Extractions were conducted at temperatures of 30, 55 and 80°C, soaking time of 60, 120 and 180 min using acidified methanol solvent with different trifluoroacetic acid (TFA) contents of 0.5, 1.75 and 3% (v/v). The statistical evaluation was performed by running analysis of variance (ANOVA) and regression calculation to investigate the significance of the generated model. Results show that the generated regression models adequately explain the data variation and significantly represented the actual relationship between the independent variables and the responses. Analysis of variance (ANOVA) showed high coefficient determination values (R2) of 0.9687 for a*, 0.9621 for b* and 0.9758 for color saturation, thus ensuring a satisfactory fit of the developed models with the experimental data. Interaction between TFA content and extraction temperature exhibited to the highest significant influence on CIE color parameter.

A hybrid approach to select features and classify diseases based on medical data

NASA Astrophysics Data System (ADS)

AbdelLatif, Hisham; Luo, Jiawei

2018-03-01

Feature selection is popular problem in the classification of diseases in clinical medicine. Here, we developing a hybrid methodology to classify diseases, based on three medical datasets, Arrhythmia, Breast cancer, and Hepatitis datasets. This methodology called k-means ANOVA Support Vector Machine (K-ANOVA-SVM) uses K-means cluster with ANOVA statistical to preprocessing data and selection the significant features, and Support Vector Machines in the classification process. To compare and evaluate the performance, we choice three classification algorithms, decision tree Naïve Bayes, Support Vector Machines and applied the medical datasets direct to these algorithms. Our methodology was a much better classification accuracy is given of 98% in Arrhythmia datasets, 92% in Breast cancer datasets and 88% in Hepatitis datasets, Compare to use the medical data directly with decision tree Naïve Bayes, and Support Vector Machines. Also, the ROC curve and precision with (K-ANOVA-SVM) Achieved best results than other algorithms

Physiological Efficacy of a Lightweight Ambient Air Cooling Unit for Various Applications

DTIC Science & Technology

1993-10-01

Acei 10. Mean skin temperature during continuous work . N*TIS. CRjI DTIC TAB 11. Thermal comfort rate during continuous work. . U nagnounf. 4...perceived exertion (RPE) and thermal comfort (TC) were taken every 10 min. Statistical analysis using a 3-way analysis of variance (ANOVA) was conducted...may account for the fact that no statistically significant differences were seen for thermal comfort and ratings of perceived exertion between the IC

Factors Influencing Stress, Burnout, and Retention of Secondary Teachers

ERIC Educational Resources Information Center

Fisher, Molly H.

2011-01-01

This study examines the stress, burnout, satisfaction, and preventive coping skills of nearly 400 secondary teachers to determine variables contributing to these major factors influencing teachers. Analysis of Variance (ANOVA) statistics were conducted that found the burnout levels between new and experienced teachers are significantly different,…

Understanding Non-Suicidal Self-Injury: Perceptions of School Counselors

ERIC Educational Resources Information Center

Simpson, Chris; Armstrong, Stephen A.; Couch, Lisa; Bore, Samuel K.

2010-01-01

This national exploratory study examined the perceptions of secondary school counselors' (n = 81) understanding of non-suicidal self-injury (NSSI). Two one-way ANOVAs revealed no statistically significant differences between middle and high school counselors on their perceptions of the prevalence of NSSI. Descriptive analyses revealed that a…

Child Sustained Attention in Preschool-Age Children

ERIC Educational Resources Information Center

DiCarlo, Cynthia F.; Baumgartner, Jennifer J.; Ota, Carrie; Geary, Kelly

2016-01-01

This study examined the mean duration of child attention across three teaching conditions (child choice, adult choice, or adult presentation) of 63 preschool-age children. A repeated-measures ANOVA was used to compare the means across the three teaching conditions, indicating a statistically significant difference between the teaching conditions.…

Effect of cefuroxime and moxifloxacin on Staphylococcus epidermidis adherence to intraocular lenses.

PubMed

Karadağ, Serhat; Ozkan, Berna; Karabaş, V Levent; Alintaş, Ozgül; Yumuk, Zeki; Cağlar, Yusuf

2009-12-01

To investigate and compare the effect of cefuroxime and moxifloxacin on adhesion of Staphylococcus epidermidis to intraocular lenses (IOLs). Experimental study. The 3-pieced hydrophobic acrylic lenses were contaminated with S. epidermidis (American Type Culture Collection 35983) solutions containing 108 colony-forming units. IOLs were inoculated into test tubes containing tryptic soy broth after being held in antibiotic solutions for 15 minutes. Sonication and vortex procedures were performed in order to remove all the remaining bacteria. From each tube 10 microL and 100 microL was taken and inoculated into sheep blood agar. The colonies were counted overnight. The statistical analyses were made using one-way ANOVA, Turkey Honestly Significant Differences test (HSD) and independent t tests, and a p value less than 0.05 was considered statistically significant. Overall, the mean numbers of colony-forming units on the lenses that were held in control, cefuroxime, moxifloxacin 0.5 mg/0.1 mL and moxifloxacin 0.1 mg/0.1 mL solutions were 1398 (SE 10.01 x 10(3)), 29.9 (SE 1.16 x 10(3)), 0.23 (SD 0.04 x 10(3)), and 0.41 (SD 0.05 x 10(3)), respectively. The evaluation using one-way ANOVA and Turkey HSD tests revealed significant statistical differences among the groups (p = 0.000). The evaluation using independent t tests revealed significant statistical differences between the 2 moxifloxacin groups (p < 0.05). Our results suggest that moxifloxacin and cefuroxime significantly inhibit bacterial adherence to IOLs. The effect of moxifloxacin on inhibition of bacterial adherence was significantly greater than that of cefuroxime. For this reason moxifloxacin might be considered as a better prophylactic agent.

Analysis of Variance in Statistical Image Processing

NASA Astrophysics Data System (ADS)

Kurz, Ludwik; Hafed Benteftifa, M.

1997-04-01

A key problem in practical image processing is the detection of specific features in a noisy image. Analysis of variance (ANOVA) techniques can be very effective in such situations, and this book gives a detailed account of the use of ANOVA in statistical image processing. The book begins by describing the statistical representation of images in the various ANOVA models. The authors present a number of computationally efficient algorithms and techniques to deal with such problems as line, edge, and object detection, as well as image restoration and enhancement. By describing the basic principles of these techniques, and showing their use in specific situations, the book will facilitate the design of new algorithms for particular applications. It will be of great interest to graduate students and engineers in the field of image processing and pattern recognition.

Multiple comparison analysis testing in ANOVA.

PubMed

McHugh, Mary L

2011-01-01

The Analysis of Variance (ANOVA) test has long been an important tool for researchers conducting studies on multiple experimental groups and one or more control groups. However, ANOVA cannot provide detailed information on differences among the various study groups, or on complex combinations of study groups. To fully understand group differences in an ANOVA, researchers must conduct tests of the differences between particular pairs of experimental and control groups. Tests conducted on subsets of data tested previously in another analysis are called post hoc tests. A class of post hoc tests that provide this type of detailed information for ANOVA results are called "multiple comparison analysis" tests. The most commonly used multiple comparison analysis statistics include the following tests: Tukey, Newman-Keuls, Scheffee, Bonferroni and Dunnett. These statistical tools each have specific uses, advantages and disadvantages. Some are best used for testing theory while others are useful in generating new theory. Selection of the appropriate post hoc test will provide researchers with the most detailed information while limiting Type 1 errors due to alpha inflation.

Reinforcing Sampling Distributions through a Randomization-Based Activity for Introducing ANOVA

ERIC Educational Resources Information Center

Taylor, Laura; Doehler, Kirsten

2015-01-01

This paper examines the use of a randomization-based activity to introduce the ANOVA F-test to students. The two main goals of this activity are to successfully teach students to comprehend ANOVA F-tests and to increase student comprehension of sampling distributions. Four sections of students in an advanced introductory statistics course…

Demineralization of resin-sealed enamel by soft drinks in a clinically relevant pH cycling model.

PubMed

Bartels, Agata A; Evans, Carla A; Viana, Grace; Bedran-Russo, Ana K

2016-04-01

To compare the in vitro protective effect of orthodontic sealants on the enamel demineralization under a soft drink-induced erosive challenge. The facial surfaces of bovine incisors were sectioned into 5 mm x 4 mm x 4 mm enamel blocks. Specimens were randomly assigned to three surface protection measures: control (exposed enamel), coating with Transbond XT (unfilled resin primer), or coating with Opal Seal (filled and fluoride releasing primer). Thermocycling was used to simulate aging. The specimens were pH cycled through an acidic buffer, test beverage and a neutral buffer for a total of 7 days. Test beverages included water, Diet Mountain Dew, and Coke Classic. Quantitative light-induced fluorescence (QLF) images were taken at baseline and after aging. Final QLF images were taken to evaluate the demineralization of enamel. Data were analyzed statistically using a two-way ANOVA to compare the interaction between enamel surface protection and beverages as well as one-way ANOVA to compare surface protection and the test beverage levels. A statistically significant interaction was found between the surface protected groups and the test beverage groups (P < 0.05). Statistically significant differences were found among the test beverage groups (P < 0.05) and among the surface protection groups (P < 0.05). Coke Classic went through the sealant layer resulting in high enamel demineralization. Enamel coating with Opal Seal significantly reduced the erosive attack of beverages.

Using Performance Methods to Enhance Students' Reading Fluency

ERIC Educational Resources Information Center

Young, Chase; Valadez, Corinne; Gandara, Cori

2016-01-01

The quasi-experimental study examined the effects of pairing Rock and Read with Readers Theater and only Rock and Read on second grade students' reading fluency scores. The 51 subjects were pre- and post-tested on five different reading fluency measures. A series of 3 × 2 repeated measures ANOVAs revealed statistically significant interaction…

The Influence of Ability Grouping on Math Achievement in a Rural Middle School

ERIC Educational Resources Information Center

Pritchard, Robert R.

2012-01-01

The researcher examined the academic performance of low-tracked students (n = 156) using standardized math test scores to determine whether there is a statistically significant difference in achievement depending on academic environment, tracked or nontracked. An analysis of variance (ANOVA) was calculated, using a paired samples t-test for a…

Retentive force and microleakage of stainless steel crowns cemented with three different luting agents.

PubMed

Yilmaz, Yucel; Dalmis, Anya; Gurbuz, Taskin; Simsek, Sera

2004-12-01

The aim of this investigation was to compare the tensile strength, microleakage, and Scanning Electron Microscope (SEM) evaluations of SSCs cemented using different adhesive cements on primary molars. Sixty-three extracted primary first molars were used. Tooth preparations were done. Crowns were altered and adapted for investigation purpose, and then cemented using glass ionomer cement (Aqua Meron), resin modified cement (RelyX Luting), and resin cement (Panavia F) on the prepared teeth. Samples were divided into two groups of 30 samples each for tensile strength and microleakage tests. The remaining three samples were used for SEM evaluation. Data were analyzed with one-way ANOVA and Tukey test. The statistical analysis of ANOVA revealed significant differences among the groups for both tensile strength and microleakage tests (p < 0.05). Tukey test showed statistically significant difference between Panavia F and RelyX Luting (p < 0.05), but none between the others (p > 0.05). This study showed that the higher the retentive force a crown possessed, the lower would be the possibility of microleakage.

Study of long term structural and functional changes in medically controlled glaucoma

PubMed Central

Pandey, Achyut N; Sujata, S

2014-01-01

AIM Prospectively analyze the long term structural and functional changes in patients of primary open angle glaucoma (POAG) receiving medical therapy (beta blockers and non beta blockers). In this study an attempt has been made to evaluate whether medical reduction of IOP prevents or delays the progression of glaucomatous visual field loss and/or optic nerve damage in patients with open angle glaucoma. METHODS Study conducted over a period of 27 months, at a tertiary eye care hospital including both eyes of 40 patients with POAG. Group 1 (20 patients, 40 eyes) received beta-blockers, and Group 2 (20 patients, 40 eyes) received non-beta-blockers. Each patient underwent intraocular pressure measurement, best corrected visual acuity, slit-lamp, fundus examination, gonioscopy, central corneal thickness, visual field assessment by Humphrey automated perimetry and retinal nerve fibre layer thickness by Stratus optical coherence tomography at baseline and at two subsequent visits. The average time interval between each visit was 10-11 months. The statistical analysis was done using one-way analysis of variance (ANOVA). Post-hoc test, using tukey' method were adopted. Probablity (P) value of 0.05 or less was considered to be statistically significant. RESULTS A total of 80 eyes of 40 patients of POAG were enrolled, 24 males, 16 females, age group 50-80 years. In both beta and non beta blocker group, reduction (improvement) in mean IOP from initial levels to the levels achieved at the 2nd and 3rd visits was statistically significant. One way ANOVA (df=2), fisher f value=11.64, P=0.000, one way ANOVA (df=3), fisher f value=35.61, P=0.000. Both mean deviation (MD) and pattern standard deviation (PSD) in both beta and non beta blockers at different visits were not statistically significant. Retinal nerve fibre layer thickness (RNFL) -only mean inferior retinal nerve fibre layer, the difference between the mean value in beta and non beta blocker groupwere statistically significant. [unpaired t test value (df=78) =2.27, P=0.03]. Side effects with beta blocker were conjunctival hyperemia (10%), burning (5%), and conjunctival hyperemia (5%) in non beta blockers. CONCLUSION Non-beta-blockers are as effective as beta-blockers in bringing about a significant lowering of intraocular pressure to the normal range, and in preventing progressive damage to the visual fields and retinal nerve fibre layer. The absence of systemic side effects and superior IOP lowering efficacy has made non beta-blockers attractive for first line therapy for the treatment of glaucoma worldwide. PMID:24634878

Study of long term structural and functional changes in medically controlled glaucoma.

PubMed

Pandey, Achyut N; Sujata, S

2014-01-01

Prospectively analyze the long term structural and functional changes in patients of primary open angle glaucoma (POAG) receiving medical therapy (beta blockers and non beta blockers). In this study an attempt has been made to evaluate whether medical reduction of IOP prevents or delays the progression of glaucomatous visual field loss and/or optic nerve damage in patients with open angle glaucoma. Study conducted over a period of 27 months, at a tertiary eye care hospital including both eyes of 40 patients with POAG. Group 1 (20 patients, 40 eyes) received beta-blockers, and Group 2 (20 patients, 40 eyes) received non-beta-blockers. Each patient underwent intraocular pressure measurement, best corrected visual acuity, slit-lamp, fundus examination, gonioscopy, central corneal thickness, visual field assessment by Humphrey automated perimetry and retinal nerve fibre layer thickness by Stratus optical coherence tomography at baseline and at two subsequent visits. The average time interval between each visit was 10-11 months. The statistical analysis was done using one-way analysis of variance (ANOVA). Post-hoc test, using tukey' method were adopted. Probablity (P) value of 0.05 or less was considered to be statistically significant. A total of 80 eyes of 40 patients of POAG were enrolled, 24 males, 16 females, age group 50-80 years. In both beta and non beta blocker group, reduction (improvement) in mean IOP from initial levels to the levels achieved at the 2nd and 3rd visits was statistically significant. One way ANOVA (df=2), fisher f value=11.64, P=0.000, one way ANOVA (df=3), fisher f value=35.61, P=0.000. Both mean deviation (MD) and pattern standard deviation (PSD) in both beta and non beta blockers at different visits were not statistically significant. Retinal nerve fibre layer thickness (RNFL) -only mean inferior retinal nerve fibre layer, the difference between the mean value in beta and non beta blocker groupwere statistically significant. [unpaired t test value (df=78) =2.27, P=0.03]. Side effects with beta blocker were conjunctival hyperemia (10%), burning (5%), and conjunctival hyperemia (5%) in non beta blockers. Non-beta-blockers are as effective as beta-blockers in bringing about a significant lowering of intraocular pressure to the normal range, and in preventing progressive damage to the visual fields and retinal nerve fibre layer. The absence of systemic side effects and superior IOP lowering efficacy has made non beta-blockers attractive for first line therapy for the treatment of glaucoma worldwide.

Effects of measurement errors on psychometric measurements in ergonomics studies: Implications for correlations, ANOVA, linear regression, factor analysis, and linear discriminant analysis.

PubMed

Liu, Yan; Salvendy, Gavriel

2009-05-01

This paper aims to demonstrate the effects of measurement errors on psychometric measurements in ergonomics studies. A variety of sources can cause random measurement errors in ergonomics studies and these errors can distort virtually every statistic computed and lead investigators to erroneous conclusions. The effects of measurement errors on five most widely used statistical analysis tools have been discussed and illustrated: correlation; ANOVA; linear regression; factor analysis; linear discriminant analysis. It has been shown that measurement errors can greatly attenuate correlations between variables, reduce statistical power of ANOVA, distort (overestimate, underestimate or even change the sign of) regression coefficients, underrate the explanation contributions of the most important factors in factor analysis and depreciate the significance of discriminant function and discrimination abilities of individual variables in discrimination analysis. The discussions will be restricted to subjective scales and survey methods and their reliability estimates. Other methods applied in ergonomics research, such as physical and electrophysiological measurements and chemical and biomedical analysis methods, also have issues of measurement errors, but they are beyond the scope of this paper. As there has been increasing interest in the development and testing of theories in ergonomics research, it has become very important for ergonomics researchers to understand the effects of measurement errors on their experiment results, which the authors believe is very critical to research progress in theory development and cumulative knowledge in the ergonomics field.

Mental and Reproductive Health Correlates of Academic Performance among Debre Berhan University Female Students, Ethiopia: The Case of Premenstrual Dysphoric Disorder.

PubMed

Alemu, Sisay Mulugeta; Habtewold, Tesfa Dejenie; Haile, Yohannes Gebreegziabhere

2017-01-01

Globally 3 to 8% of reproductive age women are suffering from premenstrual dysphoric disorder (PMDD). Several mental and reproductive health-related factors cause low academic achievement during university education. However, limited data exist in Ethiopia. The aim of the study was to investigate mental and reproductive health correlates of academic performance. Institution based cross-sectional study was conducted with 667 Debre Berhan University female students from April to June 2015. Academic performance was the outcome variable. Mental and reproductive health characteristics were explanatory variables. Two-way analysis of variance (ANOVA) test of association was applied to examine group difference in academic performance. Among 529 students who participated, 49.3% reported mild premenstrual syndrome (PMS), 36.9% reported moderate/severe PMS, and 13.8% fulfilled PMDD diagnostic criteria. The ANOVA test of association revealed that there was no significant difference in academic performance between students with different level of PMS experience ( F -statistic = 0.08, p value = 0.93). Nevertheless, there was a significant difference in academic performance between students with different length of menses ( F -statistic = 5.15, p value = 0.006). There was no significant association between PMS experience and academic performance, but on the other hand, the length of menses significantly associated with academic performance.

Local and systemic effect of transfection-reagent formulated DNA vectors on equine melanoma.

PubMed

Mählmann, Kathrin; Feige, Karsten; Juhls, Christiane; Endmann, Anne; Schuberth, Hans-Joachim; Oswald, Detlef; Hellige, Mareu; Doherr, Marcus; Cavalleri, Jessika-M V

2015-05-14

Equine melanoma has a high incidence in grey horses. Xenogenic DNA vaccination may represent a promising therapeutic approach against equine melanoma as it successfully induced an immunological response in other species suffering from melanoma and in healthy horses. In a clinical study, twenty-seven, grey, melanoma-bearing, horses were assigned to three groups (n = 9) and vaccinated on days 1, 22, and 78 with DNA vectors encoding for equine (eq) IL-12 and IL-18 alone or in combination with either human glycoprotein (hgp) 100 or human tyrosinase (htyr). Horses were vaccinated intramuscularly, and one selected melanoma was locally treated by intradermal peritumoral injection. Prior to each injection and on day 120, the sizes of up to nine melanoma lesions per horse were measured by caliper and ultrasound. Specific serum antibodies against hgp100 and htyr were measured using cell based flow-cytometric assays. An Analysis of Variance (ANOVA) for repeated measurements was performed to identify statistically significant influences on the relative tumor volume. For post-hoc testing a Tukey-Kramer Multiple-Comparison Test was performed to compare the relative volumes on the different examination days. An ANOVA for repeated measurements was performed to analyse changes in body temperature over time. A one-way ANOVA was used to evaluate differences in body temperature between the groups. A p-value < 0.05 was considered significant for all statistical tests applied. In all groups, the relative tumor volume decreased significantly to 79.1 ± 26.91% by day 120 (p < 0.0001, Tukey-Kramer Multiple-Comparison Test). Affiliation to treatment group, local treatment and examination modality had no significant influence on the results (ANOVA for repeated measurements). Neither a cellular nor a humoral immune response directed against htyr or hgp100 was detected. Horses had an increased body temperature on the day after vaccination. This is the first clinical report on a systemic effect against equine melanoma following treatment with DNA vectors encoding eqIL12 and eqIL18 and formulated with a transfection reagent. Addition of DNA vectors encoding hgp100 respectively htyr did not potentiate this effect.

Local and systemic effect of transfection-reagent formulated DNA vectors on equine melanoma.

PubMed

Mählmann, Kathrin; Feige, Karsten; Juhls, Christiane; Endmann, Anne; Schuberth, Hans-Joachim; Oswald, Detlef; Hellige, Maren; Doherr, Marcus; Cavalleri, Jessika-M V

2015-06-11

Equine melanoma has a high incidence in grey horses. Xenogenic DNA vaccination may represent a promising therapeutic approach against equine melanoma as it successfully induced an immunological response in other species suffering from melanoma and in healthy horses. In a clinical study, twenty-seven, grey, melanoma-bearing, horses were assigned to three groups (n = 9) and vaccinated on days 1, 22, and 78 with DNA vectors encoding for equine (eq) IL-12 and IL-18 alone or in combination with either human glycoprotein (hgp) 100 or human tyrosinase (htyr). Horses were vaccinated intramuscularly, and one selected melanoma was locally treated by intradermal peritumoral injection. Prior to each injection and on day 120, the sizes of up to nine melanoma lesions per horse were measured by caliper and ultrasound. Specific serum antibodies against hgp100 and htyr were measured using cell based flow-cytometric assays. An Analysis of Variance (ANOVA) for repeated measurements was performed to identify statistically significant influences on the relative tumor volume. For post-hoc testing a Tukey-Kramer Multiple-Comparison Test was performed to compare the relative volumes on the different examination days. An ANOVA for repeated measurements was performed to analyse changes in body temperature over time. A one-way ANOVA was used to evaluate differences in body temperature between the groups. A p-value < 0.05 was considered significant for all statistical tests applied. In all groups, the relative tumor volume decreased significantly to 79.1 ± 26.91% by day 120 (p < 0.0001, Tukey-Kramer Multiple-Comparison Test). Affiliation to treatment group, local treatment and examination modality had no significant influence on the results (ANOVA for repeated measurements). Neither a cellular nor a humoral immune response directed against htyr or hgp100 was detected. Horses had an increased body temperature on the day after vaccination. This is the first clinical report on a systemic effect against equine melanoma following treatment with DNA vectors encoding eqIL12 and eqIL18 and formulated with a transfection reagent. Addition of DNA vectors encoding hgp100 respectively htyr did not potentiate this effect.

A Statistical Analysis Plan to Support the Joint Forward Area Air Defense Test.

DTIC Science & Technology

1984-08-02

hy estahlishing a specific significance level prior to performing the statistical test (traditionally a levels are set at .01 or .05). What is often...undesirable increase in 8. For constant a levels , the power (I - 8) of a statistical test can he increased by Increasing the sample size of the test. fRef...ANOVA Iparison Test on MOP I=--ferences Exist AmongF "Upon MOP "A" Factor I "A" Factor I 1MOP " A " Levels ? I . I I I _ _ ________ IPerform k-Sample Com- I

Dental hygiene students' perceptions of distance learning: do they change over time?

PubMed

Sledge, Rhonda; Vuk, Jasna; Long, Susan

2014-02-01

The University of Arkansas for Medical Sciences dental hygiene program established a distant site where the didactic curriculum was broadcast via interactive video from the main campus to the distant site, supplemented with on-line learning via Blackboard. This study compared the perceptions of students towards distance learning as they progressed through the 21 month curriculum. Specifically, the study sought to answer the following questions: Is there a difference in the initial perceptions of students on the main campus and at the distant site toward distance learning? Do students' perceptions change over time with exposure to synchronous distance learning over the course of the curriculum? All 39 subjects were women between the ages of 20 and 35 years. Of the 39 subjects, 37 were Caucasian and 2 were African-American. A 15-question Likert scale survey was administered at 4 different periods during the 21 month program to compare changes in perceptions toward distance learning as students progressed through the program. An independent sample t-test and ANOVA were utilized for statistical analysis. At the beginning of the program, independent samples t-test revealed that students at the main campus (n=34) perceived statistically significantly higher effectiveness of distance learning than students at the distant site (n=5). Repeated measures of ANOVA revealed that perceptions of students at the main campus on effectiveness and advantages of distance learning statistically significantly decreased whereas perceptions of students at distant site statistically significantly increased over time. Distance learning in the dental hygiene program was discussed, and replication of the study with larger samples of students was recommended.

The Role of Gender in Neuropsychological Assessment in Healthy Adolescents.

PubMed

Mormile, Megan Elizabeth Evelyn; Langdon, Jody L; Hunt, Tamerah Nicole

2018-01-01

Research in college athletes has revealed significant gender differences in areas of verbal memory, visual memory, and reaction time. Additionally, research has focused on differences in neuropsychological components and gender in college populations; however, such differences in gender have not been documented in healthy adolescent populations. To identify potential differences between males and females using different components of a common computerized neuropsychological test. A computerized neuropsychological test battery (ImPACT®) was administered to 662 high-school age adolescent athletes (male: n = 451 female: n = 262). Differences between genders were calculated using a 1-way ANOVA. All statistical analyses were conducted using SPSS 23.0. Significance levels were set a priori at P < .05. A 1-way ANOVA revealed statistically significant differences between males and females for composite reaction time (F 1,660  = 10.68, P = .001) and total symptom score (F 1,660  = 81.20, P < .001). However, no statistically significant differences were found between males and females in composite verbal memory, visual memory, visual motor, or impulse control (P > .05). Significant differences between males and females were discovered for composite reaction time and total symptom scores, with females reporting more symptoms and slower reaction times at a baseline assessment. Increased symptom reporting by females may be attributed to both hormonal differences and increased honesty. Quicker reaction times in males may support theories that repetition of activities and quicker muscle contraction are gender dependent. However, additional research is necessary to understand gender differences in adolescent athletes during periods of cognitive and physical maturation.

Stability of Playfulness across Environmental Settings: A Pilot Study

ERIC Educational Resources Information Center

Rigby, Patricia; Gaik, Sandy

2007-01-01

The Test of Playfulness (ToP) was used in this pilot study to examine the stability of playfulness of 16 children with cerebral palsy (CP), aged 4-8 years, across three environmental settings: home, community, and school. Each videotaped play segment was scored using the ToP. The ANOVA statistic demonstrated a significant variance (p less than…

An Analytic Solution to the Computation of Power and Sample Size for Genetic Association Studies under a Pleiotropic Mode of Inheritance.

PubMed

Gordon, Derek; Londono, Douglas; Patel, Payal; Kim, Wonkuk; Finch, Stephen J; Heiman, Gary A

2016-01-01

Our motivation here is to calculate the power of 3 statistical tests used when there are genetic traits that operate under a pleiotropic mode of inheritance and when qualitative phenotypes are defined by use of thresholds for the multiple quantitative phenotypes. Specifically, we formulate a multivariate function that provides the probability that an individual has a vector of specific quantitative trait values conditional on having a risk locus genotype, and we apply thresholds to define qualitative phenotypes (affected, unaffected) and compute penetrances and conditional genotype frequencies based on the multivariate function. We extend the analytic power and minimum-sample-size-necessary (MSSN) formulas for 2 categorical data-based tests (genotype, linear trend test [LTT]) of genetic association to the pleiotropic model. We further compare the MSSN of the genotype test and the LTT with that of a multivariate ANOVA (Pillai). We approximate the MSSN for statistics by linear models using a factorial design and ANOVA. With ANOVA decomposition, we determine which factors most significantly change the power/MSSN for all statistics. Finally, we determine which test statistics have the smallest MSSN. In this work, MSSN calculations are for 2 traits (bivariate distributions) only (for illustrative purposes). We note that the calculations may be extended to address any number of traits. Our key findings are that the genotype test usually has lower MSSN requirements than the LTT. More inclusive thresholds (top/bottom 25% vs. top/bottom 10%) have higher sample size requirements. The Pillai test has a much larger MSSN than both the genotype test and the LTT, as a result of sample selection. With these formulas, researchers can specify how many subjects they must collect to localize genes for pleiotropic phenotypes. © 2017 S. Karger AG, Basel.

Biostatistics Series Module 3: Comparing Groups: Numerical Variables.

PubMed

Hazra, Avijit; Gogtay, Nithya

2016-01-01

Numerical data that are normally distributed can be analyzed with parametric tests, that is, tests which are based on the parameters that define a normal distribution curve. If the distribution is uncertain, the data can be plotted as a normal probability plot and visually inspected, or tested for normality using one of a number of goodness of fit tests, such as the Kolmogorov-Smirnov test. The widely used Student's t-test has three variants. The one-sample t-test is used to assess if a sample mean (as an estimate of the population mean) differs significantly from a given population mean. The means of two independent samples may be compared for a statistically significant difference by the unpaired or independent samples t-test. If the data sets are related in some way, their means may be compared by the paired or dependent samples t-test. The t-test should not be used to compare the means of more than two groups. Although it is possible to compare groups in pairs, when there are more than two groups, this will increase the probability of a Type I error. The one-way analysis of variance (ANOVA) is employed to compare the means of three or more independent data sets that are normally distributed. Multiple measurements from the same set of subjects cannot be treated as separate, unrelated data sets. Comparison of means in such a situation requires repeated measures ANOVA. It is to be noted that while a multiple group comparison test such as ANOVA can point to a significant difference, it does not identify exactly between which two groups the difference lies. To do this, multiple group comparison needs to be followed up by an appropriate post hoc test. An example is the Tukey's honestly significant difference test following ANOVA. If the assumptions for parametric tests are not met, there are nonparametric alternatives for comparing data sets. These include Mann-Whitney U-test as the nonparametric counterpart of the unpaired Student's t-test, Wilcoxon signed-rank test as the counterpart of the paired Student's t-test, Kruskal-Wallis test as the nonparametric equivalent of ANOVA and the Friedman's test as the counterpart of repeated measures ANOVA.

The use of reinforced composite resin cement as compensation for reduced post length.

PubMed

Nissan, J; Dmitry, Y; Assif, D

2001-09-01

Cements that yield high retentive values are believed to allow use of shorter posts. This study investigated the use of reinforced composite resin cement as compensation for reduced dowel length. The retention values of stainless steel posts (parallel-sided ParaPost and tapered Dentatus in 5-, 8-, and 10-mm lengths) luted with Flexi-Flow titanium-reinforced composite resin and zinc phosphate cements were evaluated. Single-rooted extracted human teeth with crowns (n = 120), removed at the cementoenamel junction, were randomly divided into 4 groups of 30 samples each. Different post lengths were luted with either Flexi-Flow or zinc phosphate. Each sample was placed into a specialized jig and on a tensile testing machine with a crosshead speed of 2 mm/min, applied until failure. The effect of different posts and cements on the force required to dislodge the dowels was evaluated with multiple analyses of variance (ANOVA). One-way ANOVA with Scheffé contrast was applied to determine the effect of different post lengths on the retentive failure of posts luted with the 2 agents. Flexi-Flow reinforced composite resin cement significantly increased retention of ParaPost and Dentatus dowels (P<.001) compared with zinc phosphate. One-way ANOVA revealed no statistically significant difference (P>.05) between mean retention of both dowels luted with Flexi-Flow for all posts length used (5 mm = 8 mm = 10 mm). Mean retention values of the groups luted with zinc phosphate showed a statistically significant difference (P<.001) for the different post lengths (10 > 8 > 5 mm). Parallel-sided ParaPost dowels demonstrated a higher mean retention than tapered Dentatus dowels (P<.001). In this study, Flexi-Flow reinforced composite resin cement compensated for the reduced length of shorter parallel-sided ParaPost and tapered Dentatus dowels.

WASP (Write a Scientific Paper) using Excel 9: Analysis of variance.

PubMed

Grech, Victor

2018-06-01

Analysis of variance (ANOVA) may be required by researchers as an inferential statistical test when more than two means require comparison. This paper explains how to perform ANOVA in Microsoft Excel. Copyright © 2018 Elsevier B.V. All rights reserved.

The Importance of Psychological Needs for the Post Traumatic Stress Disorder (PTSD) and Displaced Children in Schools

ERIC Educational Resources Information Center

Uguak, Uget Apayo

2011-01-01

The study targets children in especially difficult circumstances from 8-14 years; and explores the importance of psychosocial needs for the PTSD and displaced children in schools. Out of 235 participants, descriptive statistics indicated that 63 children are traumatized. Based on ANOVA findings, the result revealed that there is significant effect…

The effect of Kinesio Taping on postural control in subjects with non-specific chronic low back pain.

PubMed

Abbasi, Soheila; Rojhani-Shirazi, Zahra; Shokri, Esmaeil; García-Muro San José, Francisco

2018-04-01

The aim of this study was to investigate the possible alterations in postural control during upright standing in subjects with non-specific chronic low back pain and the effect of Kinesio taping on the postural control. Twenty subjects with non-specific chronic low back pain and twenty healthy subjects participated in this study. The center of pressure excursion was evaluated before the intervention for both groups, and immediately after intervention for the low back pain group. Independent sample t-test, Mann-Whitney test and repeated measure ANOVA were used for the statistical analysis of the data. There were significant differences in the center of pressure excursion between the low back pain group versus the healthy group. The results of the ANOVA demonstrated a statistically significant difference in the mean COP displacement and velocity before Kinesio Taping, immediately after, and 24 h after in the low back pain group. There are poor postural control mechanisms in subjects with non-specific chronic low back pain. Kinesio taping seems to change postural control immediately and have lasting effects until the day after. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Vignette (User's Guide) for “An R Package for Statistical ...

EPA Pesticide Factsheets

StatCharrms is a graphical user front-end for ease of use in analyzing data generated from OCSPP 890.2200, Medaka Extended One Generation Reproduction Test (MEOGRT) and OCSPP 890.2300, Larval Amphibian Gonad Development Assay (LAGDA). The analyses StatCharrms is capable of performing are: Rao-Scott adjusted Cochran-Armitage test for trend By Slices (RSCABS), a Standard Cochran-Armitage test for trend By Slices (SCABS), mixed effects Cox proportional model, Jonckheere-Terpstra step down trend test, Dunn test, one way ANOVA, weighted ANOVA, mixed effects ANOVA, repeated measures ANOVA, and Dunnett test. This document provides a User’s Manual (termed a Vignette by the Comprehensive R Archive Network (CRAN)) for the previously created R-code tool called StatCharrms (Statistical analysis of Chemistry, Histopathology, and Reproduction endpoints using Repeated measures and Multi-generation Studies). The StatCharrms R-code has been publically available directly from EPA staff since the approval of OCSPP 890.2200 and 890.2300, and now is available publically available at the CRAN.

Bias, precision and statistical power of analysis of covariance in the analysis of randomized trials with baseline imbalance: a simulation study.

PubMed

Egbewale, Bolaji E; Lewis, Martyn; Sim, Julius

2014-04-09

Analysis of variance (ANOVA), change-score analysis (CSA) and analysis of covariance (ANCOVA) respond differently to baseline imbalance in randomized controlled trials. However, no empirical studies appear to have quantified the differential bias and precision of estimates derived from these methods of analysis, and their relative statistical power, in relation to combinations of levels of key trial characteristics. This simulation study therefore examined the relative bias, precision and statistical power of these three analyses using simulated trial data. 126 hypothetical trial scenarios were evaluated (126,000 datasets), each with continuous data simulated by using a combination of levels of: treatment effect; pretest-posttest correlation; direction and magnitude of baseline imbalance. The bias, precision and power of each method of analysis were calculated for each scenario. Compared to the unbiased estimates produced by ANCOVA, both ANOVA and CSA are subject to bias, in relation to pretest-posttest correlation and the direction of baseline imbalance. Additionally, ANOVA and CSA are less precise than ANCOVA, especially when pretest-posttest correlation ≥ 0.3. When groups are balanced at baseline, ANCOVA is at least as powerful as the other analyses. Apparently greater power of ANOVA and CSA at certain imbalances is achieved in respect of a biased treatment effect. Across a range of correlations between pre- and post-treatment scores and at varying levels and direction of baseline imbalance, ANCOVA remains the optimum statistical method for the analysis of continuous outcomes in RCTs, in terms of bias, precision and statistical power.

Bias, precision and statistical power of analysis of covariance in the analysis of randomized trials with baseline imbalance: a simulation study

PubMed Central

2014-01-01

Background Analysis of variance (ANOVA), change-score analysis (CSA) and analysis of covariance (ANCOVA) respond differently to baseline imbalance in randomized controlled trials. However, no empirical studies appear to have quantified the differential bias and precision of estimates derived from these methods of analysis, and their relative statistical power, in relation to combinations of levels of key trial characteristics. This simulation study therefore examined the relative bias, precision and statistical power of these three analyses using simulated trial data. Methods 126 hypothetical trial scenarios were evaluated (126 000 datasets), each with continuous data simulated by using a combination of levels of: treatment effect; pretest-posttest correlation; direction and magnitude of baseline imbalance. The bias, precision and power of each method of analysis were calculated for each scenario. Results Compared to the unbiased estimates produced by ANCOVA, both ANOVA and CSA are subject to bias, in relation to pretest-posttest correlation and the direction of baseline imbalance. Additionally, ANOVA and CSA are less precise than ANCOVA, especially when pretest-posttest correlation ≥ 0.3. When groups are balanced at baseline, ANCOVA is at least as powerful as the other analyses. Apparently greater power of ANOVA and CSA at certain imbalances is achieved in respect of a biased treatment effect. Conclusions Across a range of correlations between pre- and post-treatment scores and at varying levels and direction of baseline imbalance, ANCOVA remains the optimum statistical method for the analysis of continuous outcomes in RCTs, in terms of bias, precision and statistical power. PMID:24712304

Mental and Reproductive Health Correlates of Academic Performance among Debre Berhan University Female Students, Ethiopia: The Case of Premenstrual Dysphoric Disorder

PubMed Central

Alemu, Sisay Mulugeta; Haile, Yohannes Gebreegziabhere

2017-01-01

Background Globally 3 to 8% of reproductive age women are suffering from premenstrual dysphoric disorder (PMDD). Several mental and reproductive health-related factors cause low academic achievement during university education. However, limited data exist in Ethiopia. The aim of the study was to investigate mental and reproductive health correlates of academic performance. Methods Institution based cross-sectional study was conducted with 667 Debre Berhan University female students from April to June 2015. Academic performance was the outcome variable. Mental and reproductive health characteristics were explanatory variables. Two-way analysis of variance (ANOVA) test of association was applied to examine group difference in academic performance. Result Among 529 students who participated, 49.3% reported mild premenstrual syndrome (PMS), 36.9% reported moderate/severe PMS, and 13.8% fulfilled PMDD diagnostic criteria. The ANOVA test of association revealed that there was no significant difference in academic performance between students with different level of PMS experience (F-statistic = 0.08, p value = 0.93). Nevertheless, there was a significant difference in academic performance between students with different length of menses (F-statistic = 5.15, p value = 0.006). Conclusion There was no significant association between PMS experience and academic performance, but on the other hand, the length of menses significantly associated with academic performance. PMID:28630874

Comparison of four software packages for CT lung volumetry in healthy individuals.

PubMed

Nemec, Stefan F; Molinari, Francesco; Dufresne, Valerie; Gosset, Natacha; Silva, Mario; Bankier, Alexander A

2015-06-01

To compare CT lung volumetry (CTLV) measurements provided by different software packages, and to provide normative data for lung densitometric measurements in healthy individuals. This retrospective study included 51 chest CTs of 17 volunteers (eight men and nine women; mean age, 30 ± 6 years), who underwent spirometrically monitored CT at total lung capacity (TLC), functional residual capacity (FRC), and mean inspiratory capacity (MIC). Volumetric differences assessed by four commercial software packages were compared with analysis of variance (ANOVA) for repeated measurements and benchmarked against the threshold for acceptable variability between spirometric measurements. Mean lung density (MLD) and parenchymal heterogeneity (MLD-SD) were also compared with ANOVA. Volumetric differences ranged from 12 to 213 ml (0.20 % to 6.45 %). Although 16/18 comparisons (among four software packages at TLC, MIC, and FRC) were statistically significant (P < 0.001 to P = 0.004), only 3/18 comparisons, one at MIC and two at FRC, exceeded the spirometry variability threshold. MLD and MLD-SD significantly increased with decreasing volumes, and were significantly larger in lower compared to upper lobes (P < 0.001). Lung volumetric differences provided by different software packages are small. These differences should not be interpreted based on statistical significance alone, but together with absolute volumetric differences. • Volumetric differences, assessed by different CTLV software, are small but statistically significant. • Volumetric differences are smaller at TLC than at MIC and FRC. • Volumetric differences rarely exceed spirometric repeatability thresholds at MIC and FRC. • Differences between CTLV measurements should be interpreted based on comparison of absolute differences. • MLD increases with decreasing volumes, and is larger in lower compared to upper lobes.

Relationship of long-term highly active antiretroviral therapy on salivary flow rate and CD4 Count among HIV-infected patients.

PubMed

Kumar, J Vijay; Baghirath, P Venkat; Naishadham, P Parameswar; Suneetha, Sujai; Suneetha, Lavanya; Sreedevi, P

2015-01-01

To determine if long-term highly active antiretroviral therapy (HAART) therapy alters salivary flow rate and also to compare its relation of CD4 count with unstimulated and stimulated whole saliva. A cross-sectional study was performed on 150 individuals divided into three groups. Group I (50 human immunodeficiency virus (HIV) seropositive patients, but not on HAART therapy), Group II (50 HIV-infected subjects and on HAART for less than 3 years called short-term HAART), Group III (50 HIV-infected subjects and on HAART for more than or equal to 3 years called long-term HAART). Spitting method proposed by Navazesh and Kumar was used for the measurement of unstimulated and stimulated salivary flow rate. Chi-square test and analysis of variance (ANOVA) were used for statistical analysis. The mean CD4 count was 424.78 ± 187.03, 497.82 ± 206.11 and 537.6 ± 264.00 in the respective groups. Majority of the patients in all the groups had a CD4 count between 401 and 600. Both unstimulated and stimulated whole salivary (UWS and SWS) flow rates in Group I was found to be significantly higher than in Group II (P < 0.05). Unstimulated salivary flow rate between Group II and III subjects were also found to be statistically significant (P < 0.05). ANOVA performed between CD4 count and unstimulated and stimulated whole saliva in each group demonstrated a statistically significant relationship in Group II (P < 0.05). There were no significant results found between CD4 count and stimulated whole saliva in each groups. The reduction in CD4 cell counts were significantly associated with salivary flow rates of HIV-infected individuals who are on long-term HAART.

One-way ANOVA based on interval information

NASA Astrophysics Data System (ADS)

Hesamian, Gholamreza

2016-08-01

This paper deals with extending the one-way analysis of variance (ANOVA) to the case where the observed data are represented by closed intervals rather than real numbers. In this approach, first a notion of interval random variable is introduced. Especially, a normal distribution with interval parameters is introduced to investigate hypotheses about the equality of interval means or test the homogeneity of interval variances assumption. Moreover, the least significant difference (LSD method) for investigating multiple comparison of interval means is developed when the null hypothesis about the equality of means is rejected. Then, at a given interval significance level, an index is applied to compare the interval test statistic and the related interval critical value as a criterion to accept or reject the null interval hypothesis of interest. Finally, the method of decision-making leads to some degrees to accept or reject the interval hypotheses. An applied example will be used to show the performance of this method.

SMAR Sessions

NASA Technical Reports Server (NTRS)

Ploutz-Snyder, Robert

2011-01-01

This slide presentation is a series of educational presentations that are on the statistical function of analysis of variance (ANOVA). Analysis of Variance (ANOVA) examines variability between groups, relative to within groups, to determine whether there's evidence that the groups are not from the same population. One other presentation reviews hypothesis testing.

Effects of metacognitive instruction on the academic achievement of students in the secondary sciences

NASA Astrophysics Data System (ADS)

Bianchi, Gregory A.

The purpose of this study was to investigate the effects of reflective assessment in the form of situated metacognitive prompts on student achievement in the secondary sciences. A second goal was to determine whether specific gender differences existed in terms of student responsiveness to the metacognitive interventions. Participants in the study consisted of a convenience sample from a population of ninth-grade honors biology students in a large suburban school district located near Seattle, Washington. Beyond answering the specific research questions raised in this study, an additional aim was to broaden the growing body of research pertaining to the effect of metacognition on student achievement. A quasi-experimental, non-equivalent control group design was employed in this study. Descriptive and inferential statistics were computed to address the specific research questions raised. Specifically, a three-way repeated-measures ANOVA was performed. For this purpose, a single within-subjects factor, termed Testing, was defined. Three levels were allocated to this factor, and quantitative data from the Pretest, Posttest, and Retention Test were assigned to the levels, respectively. Group and Gender were defined as between-subjects factors, and both were allocated two levels; the two Group levels were Reflective and Non-Reflective. The effects of Group and Gender on each of the three quantitative measures were examined singly and in interaction with each other. Tests of statistical significance were analyzed at the .05 level. There was a statistically significant effect for Group (Reflective, Non-Reflective) by Testing (Pretest, Posttest, Retention Test). A three-way repeated-measures ANOVA procedure revealed that students in the Reflective group outperformed students in the Non-Reflective group (F = 10.258, p = .002, Partial eta 2 = .088). According to the effect size estimate, almost 9% of variance in the Testing variable was attributable to the Group variable. There was not a significant interaction effect for Gender. A three-way repeated-measures ANOVA procedure revealed that Testing X Group X Gender did not yield a statistically significant F ratio (F = 1.471, p = .228, Partial eta2 = .014). Students in the Reflective group outperformed students in the Non-Reflective group, regardless of gender. The findings of this study offer modest evidence that reflective assessment in the form of situated metacognitive prompts may improve student academic outcomes at the secondary level. This study failed to provide a significant finding regarding gender-related variation in a metacognitive learning cycle.

T2 relaxation time is related to liver fibrosis severity

PubMed Central

Siqueira, Luiz; Uppal, Ritika; Alford, Jamu; Fuchs, Bryan C.; Yamada, Suguru; Tanabe, Kenneth; Chung, Raymond T.; Lauwers, Gregory; Chew, Michael L.; Boland, Giles W.; Sahani, Duhyant V.; Vangel, Mark; Hahn, Peter F.; Caravan, Peter

2016-01-01

Background The grading of liver fibrosis relies on liver biopsy. Imaging techniques, including elastography and relaxometric, techniques have had varying success in diagnosing moderate fibrosis. The goal of this study was to determine if there is a relationship between the T2-relaxation time of hepatic parenchyma and the histologic grade of liver fibrosis in patients with hepatitis C undergoing both routine, liver MRI and liver biopsy, and to validate our methodology with phantoms and in a rat model of liver fibrosis. Methods This study is composed of three parts: (I) 123 patients who underwent both routine, clinical liver MRI and biopsy within a 6-month period, between July 1999 and January 2010 were enrolled in a retrospective study. MR imaging was performed at 1.5 T using dual-echo turbo-spin echo equivalent pulse sequence. T2 relaxation time of liver parenchyma in patients was calculated by mono-exponential fit of a region of interest (ROI) within the right lobe correlating to histopathologic grading (Ishak 0–6) and routine serum liver inflammation [aspartate aminotransferase (AST) and alanine aminotransferase (ALT)]. Statistical comparison was performed using ordinary logistic and ordinal logistic regression and ANOVA comparing T2 to Ishak fibrosis without and using AST and ALT as covariates; (II) a phantom was prepared using serial dilutions of dextran coated magnetic iron oxide nanoparticles. T2 weighed imaging was performed by comparing a dual echo fast spin echo sequence to a Carr-Purcell-Meigboom-Gill (CPMG) multi-echo sequence at 1.5 T. Statistical comparison was performed using a paired t-test; (III) male Wistar rats receiving weekly intraperitoneal injections of phosphate buffer solution (PBS) control (n=4 rats); diethylnitrosamine (DEN) for either 5 (n=5 rats) or 8 weeks (n=4 rats) were MR imaged on a Bruker Pharmascan 4.7 T magnet with a home-built bird-cage coil. T2 was quantified by using a mono-exponential fitting algorithm on multi-slice multi echo T2 weighted data. Statistical comparison was performed using ANOVA. Results (I) Histopathologic evaluation of both rat and human livers demonstrated no evidence of steatosis or hemochromatosis There was a monotonic increase in mean T2 value with increasing degree of fibrosis (control 65.4±2.9 ms, n=6 patients); mild (Ishak 1–2) 66.7±1.9 ms (n=30); moderate (Ishak 3–4) 71.6±1.7 ms (n=26); severe (Ishak 5–6) 72.4±1.4 ms (n=61); with relatively low standard error (~2.9 ms). There was a statistically significant difference between degrees of mild (Ishak <4) vs. moderate to severe fibrosis (Ishak >4) (P=0.03) based on logistic regression of T2 and Ishak, which became insignificant (P=0.07) when using inflammatory markers as covariates. Expanding on this model using ordinal logistic regression, there was significance amongst all 4 groups comparing T2 to Ishak (P=0.01), with significance using inflammation as a covariate (P=0.03) and approaching statistical significance amongst all groups by ANOVA (P=0.07); (II) there was a monotonic increase in T2 and statistical significance (ANOVA P<0.0001) between each rat subgroup [phosphate buffer solution (PBS) 25.2±0.8, DEN 5-week (31.1±1.5), and DEN 9-week (49.4±0.4) ms]; (III) the phantoms that had T2 values within the relevant range for the human liver (e.g., 20–100 ms), demonstrated no statistical difference between two point fits on turbo spin echo (TSE) data and multi-echo CPMG data (P=0.9). Conclusions The finding of increased T2 with liver fibrosis may relate to inflammation that may be an alternative or adjunct to other noninvasive MR imaging based approaches for assessing liver fibrosis. PMID:27190762

Effects of chocolate intake on Perceived Stress; a Controlled Clinical Study

PubMed Central

Al Sunni, Ahmed; Latif, Rabia

2014-01-01

Background Cocoa polyphenols have been shown to reduce stress in highly stressed, as well as normal healthy individuals, we wondered whether commercially available chocolate could reduce perceived stress in medical students or not, so we decided to conduct this study. Methods Sixty students were divided into 3 groups (10 males + 10 females/group): i) Dark chocolate (DC) ii) Milk chocolate (MC) iii) White chocolate (WC). Subjects answered a PSS-10 (Perceived Stress Scale) questionnaire at baseline and after consumption of chocolate (40 g/day) for 2 weeks. Data were analyzed by using Microsoft Excel and SPSS version 20. Descriptive analyses were conducted. Means were compared across the study groups by One-Way ANOVA and within the same group by paired ‘t’ test. Results Mean stress scores compared between the groups by ANOVA revealed statistically not significant differences before (F =0.505; P=0.606) and after chocolate consumption (F=0.188; P=0.829). Paired ‘t’ test compared stress scores means before and after chocolate supplementation within the same group and exhibited statistically significant decrease in DC (t = 2.341; p value = 0.03) and MC (t = 3.302; p value = 0.004) groups. Mean stress scores decreased, on average, by approximately 2 and 3 points in DC and MC groups, respectively, at 95% Confidence Interval. The difference was more evident and statistically significant in female students as compared to the males. Conclusion Consumption of 40 g of Dark and Milk chocolate daily during a period of 2 weeks appear to be an effective way to reduce perceived stress in females. PMID:25780358

Effects of chocolate intake on Perceived Stress; a Controlled Clinical Study.

PubMed

Al Sunni, Ahmed; Latif, Rabia

2014-10-01

Cocoa polyphenols have been shown to reduce stress in highly stressed, as well as normal healthy individuals, we wondered whether commercially available chocolate could reduce perceived stress in medical students or not, so we decided to conduct this study. Sixty students were divided into 3 groups (10 males + 10 females/group): i) Dark chocolate (DC) ii) Milk chocolate (MC) iii) White chocolate (WC). Subjects answered a PSS-10 (Perceived Stress Scale) questionnaire at baseline and after consumption of chocolate (40 g/day) for 2 weeks. Data were analyzed by using Microsoft Excel and SPSS version 20. Descriptive analyses were conducted. Means were compared across the study groups by One-Way ANOVA and within the same group by paired 't' test. Mean stress scores compared between the groups by ANOVA revealed statistically not significant differences before (F =0.505; P=0.606) and after chocolate consumption (F=0.188; P=0.829). Paired 't' test compared stress scores means before and after chocolate supplementation within the same group and exhibited statistically significant decrease in DC (t = 2.341; p value = 0.03) and MC (t = 3.302; p value = 0.004) groups. Mean stress scores decreased, on average, by approximately 2 and 3 points in DC and MC groups, respectively, at 95% Confidence Interval. The difference was more evident and statistically significant in female students as compared to the males. Consumption of 40 g of Dark and Milk chocolate daily during a period of 2 weeks appear to be an effective way to reduce perceived stress in females.

Effect of denture cleaning on abrasion resistance and surface topography of polymerized CAD CAM acrylic resin denture base

PubMed Central

Shinawi, Lana Ahmed

2017-01-01

Background The application of computer-aided design computer-aided manufacturing (CAD CAM) technology in the fabrication of complete dentures, offers numerous advantages as it provides optimum fit and eliminates polymerization shrinkage of the acrylic base. Additionally, the porosity and surface roughness of CAD CAM resins is less compared to conventionally processed resins which leads to a decrease in the adhesion of bacteria on the denture base, which is associated with many conditions including halitosis and aspiration pneumonia in elderly denture wearers. Aim To evaluate the influence of tooth brushing with dentifrices on CAD CAM resin blocks in terms of abrasion resistance, surface roughness and scanning electron photomicrography. Methods This experimental study was carried out at the Faculty of Dentistry of King Abdulaziz University during 2016. A total of 40 rectangular shaped polymerized CAD CAM resin samples were subjected to 40.000 and 60.000 brushing strokes under a 200-gram vertical load simulating three years of tooth brushing strokes using commercially available denture cleaning dentifrice. Data were analyzed by SPSS version 20, using descriptive statistics and ANOVA. Results ANOVA test revealed a statistical significant weight loss of CAD CAM acrylic resin denture base specimens following 40.000 and 60.000 brushing strokes as well as a statistical significant change (p=0.0.5) in the surface roughness following brushing. The CAD CAM resin samples SEM baseline imaging revealed a relatively smooth homogenous surface, but following 40,000 and 60,000 brushing strokes, imaging displayed the presence of small scratches on the surface. Conclusion CAD CAM resin displayed a homogenous surface initially with low surface roughness that was significantly affected following simulating three years of manual brushing, but despite the significant weight loss, the findings are within the clinically acceptable limits. PMID:28713496

Effect of denture cleaning on abrasion resistance and surface topography of polymerized CAD CAM acrylic resin denture base.

PubMed

Shinawi, Lana Ahmed

2017-05-01

The application of computer-aided design computer-aided manufacturing (CAD CAM) technology in the fabrication of complete dentures, offers numerous advantages as it provides optimum fit and eliminates polymerization shrinkage of the acrylic base. Additionally, the porosity and surface roughness of CAD CAM resins is less compared to conventionally processed resins which leads to a decrease in the adhesion of bacteria on the denture base, which is associated with many conditions including halitosis and aspiration pneumonia in elderly denture wearers. To evaluate the influence of tooth brushing with dentifrices on CAD CAM resin blocks in terms of abrasion resistance, surface roughness and scanning electron photomicrography. This experimental study was carried out at the Faculty of Dentistry of King Abdulaziz University during 2016. A total of 40 rectangular shaped polymerized CAD CAM resin samples were subjected to 40.000 and 60.000 brushing strokes under a 200-gram vertical load simulating three years of tooth brushing strokes using commercially available denture cleaning dentifrice. Data were analyzed by SPSS version 20, using descriptive statistics and ANOVA. ANOVA test revealed a statistical significant weight loss of CAD CAM acrylic resin denture base specimens following 40.000 and 60.000 brushing strokes as well as a statistical significant change (p=0.0.5) in the surface roughness following brushing. The CAD CAM resin samples SEM baseline imaging revealed a relatively smooth homogenous surface, but following 40,000 and 60,000 brushing strokes, imaging displayed the presence of small scratches on the surface. CAD CAM resin displayed a homogenous surface initially with low surface roughness that was significantly affected following simulating three years of manual brushing, but despite the significant weight loss, the findings are within the clinically acceptable limits.

Effect of a Trampoline Exercise on the Anthropometric Measures and Motor Performance of Adolescent Students

PubMed Central

Aalizadeh, Bahman; Mohammadzadeh, Hassan; Khazani, Ali; Dadras, Ali

2016-01-01

Background: Physical exercises can influence some anthropometric and fitness components differently. The aim of present study was to evaluate how a relatively long-term training program in 11-14-year-old male Iranian students affects their anthropometric and motor performance measures. Methods: Measurements were conducted on the anthropometric and fitness components of participants (n = 28) prior to and following the program. They trained 20 weeks, 1.5 h/session with 10 min rest, in 4 times trampoline training programs per week. Motor performance of all participants was assessed using standing long jump and vertical jump based on Eurofit Test Battery. Results: The analysis of variance (ANOVA) repeated measurement test showed a statistically significant main effect of time in calf girth P = 0.001, fat% P = 0.01, vertical jump P = 0.001, and long jump P = 0.001. The ANOVA repeated measurement test revealed a statistically significant main effect of group in fat% P = 0.001. Post hoc paired t-tests indicated statistical significant differences in trampoline group between the two measurements about calf girth (t = −4.35, P = 0.001), fat% (t = 5.87, P = 0.001), vertical jump (t = −5.53, P = 0.001), and long jump (t = −10.00, P = 0.001). Conclusions: We can conclude that 20-week trampoline training with four physical activity sessions/week in 11–14-year-old students seems to have a significant effect on body fat% reduction and effective results in terms of anaerobic physical fitness. Therefore, it is suggested that different training model approach such as trampoline exercises can help students to promote the level of health and motor performance. PMID:27512557

Effect of a Trampoline Exercise on the Anthropometric Measures and Motor Performance of Adolescent Students.

PubMed

Aalizadeh, Bahman; Mohammadzadeh, Hassan; Khazani, Ali; Dadras, Ali

2016-01-01

Physical exercises can influence some anthropometric and fitness components differently. The aim of present study was to evaluate how a relatively long-term training program in 11-14-year-old male Iranian students affects their anthropometric and motor performance measures. Measurements were conducted on the anthropometric and fitness components of participants (n = 28) prior to and following the program. They trained 20 weeks, 1.5 h/session with 10 min rest, in 4 times trampoline training programs per week. Motor performance of all participants was assessed using standing long jump and vertical jump based on Eurofit Test Battery. The analysis of variance (ANOVA) repeated measurement test showed a statistically significant main effect of time in calf girth P = 0.001, fat% P = 0.01, vertical jump P = 0.001, and long jump P = 0.001. The ANOVA repeated measurement test revealed a statistically significant main effect of group in fat% P = 0.001. Post hoc paired t-tests indicated statistical significant differences in trampoline group between the two measurements about calf girth (t = -4.35, P = 0.001), fat% (t = 5.87, P = 0.001), vertical jump (t = -5.53, P = 0.001), and long jump (t = -10.00, P = 0.001). We can conclude that 20-week trampoline training with four physical activity sessions/week in 11-14-year-old students seems to have a significant effect on body fat% reduction and effective results in terms of anaerobic physical fitness. Therefore, it is suggested that different training model approach such as trampoline exercises can help students to promote the level of health and motor performance.

SU-F-T-386: Analysis of Three QA Methods for Predicting Dose Deviation Pass Percentage for Lung SBRT VMAT Plans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, M; To, D; Giaddui, T

2016-06-15

Purpose: To investigate the significance of using pinpoint ionization chambers (IC) and RadCalc (RC) in determining the quality of lung SBRT VMAT plans with low dose deviation pass percentage (DDPP) as reported by ScandiDos Delta4 (D4). To quantify the relationship between DDPP and point dose deviations determined by IC (ICDD), RadCalc (RCDD), and median dose deviation reported by D4 (D4DD). Methods: Point dose deviations and D4 DDPP were compiled for 45 SBRT VMAT plans. Eighteen patients were treated on Varian Truebeam linear accelerators (linacs); the remaining 27 were treated on Elekta Synergy linacs with Agility collimators. A one-way analysis ofmore » variance (ANOVA) was performed to determine if there were any statistically significant differences between D4DD, ICDD, and RCDD. Tukey’s test was used to determine which pair of means was statistically different from each other. Multiple regression analysis was performed to determine if D4DD, ICDD, or RCDD are statistically significant predictors of DDPP. Results: Median DDPP, D4DD, ICDD, and RCDD were 80.5% (47.6%–99.2%), −0.3% (−2.0%–1.6%), 0.2% (−7.5%–6.3%), and 2.9% (−4.0%–19.7%), respectively. The ANOVA showed a statistically significant difference between D4DD, ICDD, and RCDD for a 95% confidence interval (p < 0.001). Tukey’s test revealed a statistically significant difference between two pairs of groups, RCDD-D4DD and RCDD-ICDD (p < 0.001), but no difference between ICDD-D4DD (p = 0.485). Multiple regression analysis revealed that ICDD (p = 0.04) and D4DD (p = 0.03) are statistically significant predictors of DDPP with an adjusted r{sup 2} of 0.115. Conclusion: This study shows ICDD predicts trends in D4 DDPP; however this trend is highly variable as shown by our low r{sup 2}. This work suggests that ICDD can be used as a method to verify DDPP in delivery of lung SBRT VMAT plans. RCDD may not validate low DDPP discovered in D4 QA for small field SBRT treatments.« less

[Effect of occupational stress on mental health].

PubMed

Yu, Shan-fa; Zhang, Rui; Ma, Liang-qing; Gu, Gui-zhen; Yang, Yan; Li, Kui-rong

2003-02-01

To study the effect of job psychological demands and job control on mental health and their interaction. 93 male freight train dispatchers were evaluated by using revised Job Demand-Control Scale and 7 strain scales. Stepwise regression analysis, Univariate ANOVA, Kruskal-Wallis H and Modian methods were used in statistic analysis. Kruskal-Wallis H and Modian methods analysis revealed the difference in mental health scores among groups of decision latitude (mean rank 55.57, 47.95, 48.42, 33.50, P < 0.05), the differences in scores of mental health (37.45, 40.01, 58.35), job satisfaction (53.18, 46.91, 32.43), daily life strains (33.00, 44.96, 56.12) and depression (36.45, 42.25, 53.61) among groups of job time demands (P < 0.05) were all statistically significant. ANOVA showed that job time demands and decision latitude had interaction effects on physical complains (R(2) = 0.24), state-anxiety (R(2) = 0.26), and daytime fatigue (R(2) = 0.28) (P < 0.05). Regression analysis revealed a significant job time demands and job decision latitude interaction effect as well as significant main effects of the some independent variables on different job strains (R(2) > 0.05). Job time demands and job decision latitude have direct and interactive effects on psychosomatic health, the more time demands, the more psychological strains, the effect of job time demands is greater than that of job decision latitude.

Effectiveness of probiotic, chlorhexidine and fluoride mouthwash against Streptococcus mutans – Randomized, single-blind, in vivo study

PubMed Central

Jothika, Mohan; Vanajassun, P. Pranav; Someshwar, Battu

2015-01-01

Aim: To determine the short-term efficiency of probiotic, chlorhexidine, and fluoride mouthwashes on plaque Streptococcus mutans level at four periodic intervals. Materials and Methods: This was a single-blind, randomized control study in which each subject was tested with only one mouthwash regimen. Fifty-two healthy qualified adult patients were selected randomly for the study and were divided into the following groups: group 1- 10 ml of distilled water, group 2- 10 ml of 0.2% chlorhexidine mouthwash, group 3- 10 ml of 500 ppm F/400 ml sodium fluoride mouthwash, and group 4- 10 ml of probiotic mouthwash. Plaque samples were collected from the buccal surface of premolars and molars in the maxillary quadrant. Sampling procedure was carried out by a single examiner after 7 days, 14 days, and 30 days, respectively, after the use of the mouthwash. All the samples were subjected to microbiological analysis and statistically analyzed with one-way analysis of variance (ANOVA) and post-hoc test. Results: One-way ANOVA comparison among groups 2, 3, and 4 showed no statistical significance, whereas group 1 showed statistically significant difference when compared with groups 2, 3, and 4 at 7th, 14th, and 30th day. Conclusion: Chlorhexidine, sodium fluoride, and probiotic mouthwashes reduce plaque S. mutans levels. Probiotic mouthwash is effective and equivalent to chlorhexidine and sodium fluoride mouthwashes. Thus, probiotic mouthwash can also be considered as an effective oral hygiene regimen. PMID:25984467

The Short-Term Effects of Lying, Sitting and Standing on Energy Expenditure in Women

PubMed Central

POPP, COLLIN J.; BRIDGES, WILLIAM C.; JESCH, ELLIOT D.

2018-01-01

The deleterious health effects of too much sitting have been associated with an increased risk for overweight and obesity. Replacing sitting with standing is the proposed intervention to increase daily energy expenditure (EE). The purpose of this study was to determine the short-term effects of lying, sitting, and standing postures on EE, and determine the magnitude of the effect each posture has on EE using indirect calorimetry (IC). Twenty-eight healthy females performed three separate positions (lying, sitting, standing) in random order. Inspired and expired gases were collected for 45-minutes (15 minutes for each position) using breath-by-breath indirect calorimetry. Oxygen consumption (VO2) and carbon dioxide production (VCO2) were measured to estimate EE. Statistical analyses used repeat measures ANOVA to analyze all variables and post hoc t-tests. Based on the ANOVA the individual, time period and order term did not result in a statistically significant difference. Lying EE and sitting EE were not different from each other (P = 0.56). However, standing EE (kcal/min) was 9.0 % greater than lying EE (kcal/min) (P = 0.003), and 7.1% greater than sitting EE (kcal/min) (P = 0.02). The energetic cost of standing was higher compared to lying and sitting. While this is statistically significant, the magnitude of the effect of standing when compared to sitting was small (Cohen’s d = 0.31). Short-term standing does not offer an energetic advantage when compared to sitting.

Comparison of the flexural strength of six reinforced restorative materials.

PubMed

Cohen, B I; Volovich, Y; Musikant, B L; Deutsch, A S

2001-01-01

This study calculated the flexural strength for six reinforced restorative materials and demonstrated that flexural strength values can be determined simply by using physical parameters (diametral tensile strength and Young's modulus values) that are easily determined experimentally. A one-way ANOVA analysis demonstrated a statistically significant difference between the two reinforced glass ionomers and the four composite resin materials, with the composite resin being stronger than the glass ionomers.

Comparing preseason frontal and sagittal plane plyometric programs on vertical jump height in high-school basketball players.

PubMed

King, Jeffrey A; Cipriani, Daniel J

2010-08-01

The primary purpose of this study was to evaluate whether frontal plane (FP) plyometrics, which are defined as plyometrics dominated with a lateral component, would produce similar increases in vertical jump height (VJH) compared to sagittal plane (SP) Plyometrics. Thirty-two junior varsity and varsity high-school basketball players participated in 6 weeks of plyometric training. Players participated in either FP or SP plyometrics for the entire study. Vertical jump height was measured on 3 occasions: preintervention (baseline), at week 3 of preparatory training, and at week 6 of training. Descriptive statistics were calculated for VJH. A 2-way analysis of variance (ANOVA) with repeated measures was used to test the difference in mean vertical jump scores using FP and SP training modalities. Results showed a significant effect over time for vertical jump (p < 0.001). Moreover, a significant time by protocol interaction was noted (p < 0.032). A 1-way ANOVA demonstrated that only the SP group demonstrated improvements over time, in VJH, p < 0.05. The FP group did not improve statistically. The data from this study suggest that FP plyometric training did not have a significant effect on VJH and significant improvement in VJH was seen in subjects participating in SP plyometrics thus reinforcing the specificity principle of training. However, coaches should implement both types of plyometrics because both training modalities can improve power and quickness among basketball players.

Eta Squared, Partial Eta Squared, and Misreporting of Effect Size in Communication Research.

ERIC Educational Resources Information Center

Levine, Timothy R.; Hullett, Craig R.

2002-01-01

Alerts communication researchers to potential errors stemming from the use of SPSS (Statistical Package for the Social Sciences) to obtain estimates of eta squared in analysis of variance (ANOVA). Strives to clarify issues concerning the development and appropriate use of eta squared and partial eta squared in ANOVA. Discusses the reporting of…

Quantitative Comparison of Three Standardization Methods Using a One-Way ANOVA for Multiple Mean Comparisons

ERIC Educational Resources Information Center

Barrows, Russell D.

2007-01-01

A one-way ANOVA experiment is performed to determine whether or not the three standardization methods are statistically different in determining the concentration of the three paraffin analytes. The laboratory exercise asks students to combine the three methods in a single analytical procedure of their own design to determine the concentration of…

Reporting Practices and Use of Quantitative Methods in Canadian Journal Articles in Psychology.

PubMed

Counsell, Alyssa; Harlow, Lisa L

2017-05-01

With recent focus on the state of research in psychology, it is essential to assess the nature of the statistical methods and analyses used and reported by psychological researchers. To that end, we investigated the prevalence of different statistical procedures and the nature of statistical reporting practices in recent articles from the four major Canadian psychology journals. The majority of authors evaluated their research hypotheses through the use of analysis of variance (ANOVA), t -tests, and multiple regression. Multivariate approaches were less common. Null hypothesis significance testing remains a popular strategy, but the majority of authors reported a standardized or unstandardized effect size measure alongside their significance test results. Confidence intervals on effect sizes were infrequently employed. Many authors provided minimal details about their statistical analyses and less than a third of the articles presented on data complications such as missing data and violations of statistical assumptions. Strengths of and areas needing improvement for reporting quantitative results are highlighted. The paper concludes with recommendations for how researchers and reviewers can improve comprehension and transparency in statistical reporting.

An evaluation of shear bond strength of self-etch adhesive on pre-etched enamel: an in vitro study.

PubMed

Rao, Bhadra; Reddy, Satti Narayana; Mujeeb, Abdul; Mehta, Kanchan; Saritha, G

2013-11-01

To determine the shear bond strength of self-etch adhesive G-bond on pre-etched enamel. Thirty caries free human mandibular premolars extracted for orthodontic purpose were used for the study. Occlusal surfaces of all the teeth were flattened with diamond bur and a silicon carbide paper was used for surface smoothening. The thirty samples were randomly grouped into three groups. Three different etch systems were used for the composite build up: group 1 (G-bond self-etch adhesive system), group 2 (G-bond) and group 3 (Adper single bond). Light cured was applied for 10 seconds with a LED unit for composite buildup on the occlusal surface of each tooth with 8 millimeters (mm) in diameter and 3 mm in thickness. The specimens in each group were tested in shear mode using a knife-edge testing apparatus in a universal testing machine across head speed of 1 mm/ minute. Shear bond strength values in Mpa were calculated from the peak load at failure divided by the specimen surface area. The mean shear bond strength of all the groups were calculated and statistical analysis was carried out using one-way Analysis of Variance (ANOVA). The mean bond strength of group 1 is 15.5 Mpa, group 2 is 19.5 Mpa and group 3 is 20.1 Mpa. Statistical analysis was carried out between the groups using one-way ANOVA. Group 1 showed statistically significant lower bond strength when compared to groups 2 and 3. No statistical significant difference between groups 2 and 3 (p < 0.05). Self-etch adhesive G-bond showed increase in shear bond strength on pre-etched enamel.

Comparison of light transmittance in different thicknesses of zirconia under various light curing units

PubMed Central

Egilmez, Ferhan; Ergun, Gulfem

2012-01-01

PURPOSE The objective of this study was to compare the light transmittance of zirconia in different thicknesses using various light curing units. MATERIALS AND METHODS A total of 21 disc-shaped zirconia specimens (5 mm in diameter) in different thicknesses (0.3, 0.5 and 0.8 mm) were prepared. The light transmittance of the specimens under three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) was compared by using a hand-held radiometer. Statistical significance was determined using two-way ANOVA (α=.05). RESULTS ANOVA revealed that thickness of zirconia and light curing unit had significant effects on light transmittance (P<.001). CONCLUSION Greater thickness of zirconia results in lower light transmittance. Light-emitting diodes light-curing units might be considered as effective as Plasma arc light-curing units or more effective than Quartz-tungsten-halogen light-curing units for polymerization of the resin-based materials. PMID:22737314

E-WOM Review Adoption: Consumers’ Demographic Profile Influence on Green Purchase Intention

NASA Astrophysics Data System (ADS)

Rahim, Roslin Abdul; Sulaiman, Zuraidah; Chin, Thoo Ai; Arif, Mohd Shoki Mohd; Hamid, Mohd Hakim Abdul

2017-06-01

Nowadays, green products are getting popular in their acceptance by the Malaysian consumers. Due to the advancement of the Internet technologies and the wide spread of electronic word of mouth (E-WOM), consumers seem to be more influenced in purchasing the green products. In this study, consumers’ demographic profiles, such as age, gender, income, education background, and occupation are being explored to investigate their influences on consumers’ green product purchase intention. The purpose of this paper is to showcase the results of the differences between several demographic profile groups on green product purchase intention using descriptive analysis, ANOVA and independent sample T-Test. T-test results showed that there is a statistically significant difference between gender on consumers’ green product purchase intention. Meanwhile, the results generated by ANOVA indicated that there are no significant differences between age, income, education background and occupation on consumers’ green product purchase intention. These results shed light on the potential market segment that should be targeted by marketers and producers of green products in Malaysia.

The effect of a family-based intervention with a cognitive-behavioral approach on elder abuse.

PubMed

Khanlary, Zahra; Maarefvand, Masoomeh; Biglarian, Akbar; Heravi-Karimooi, Majideh

2016-01-01

Elder abuse may become a health issue in developing countries, including Iran. The purpose of this investigation was to study the effectiveness of Family-Based Cognitive-Behavioral Social Work (FBCBSW) in reducing elder abuse. In a randomized clinical trial in Iran, 27 elders participated in intervention and control groups. The intervention groups received a five-session FBCBSW intervention and completed the Domestic-Elder-Abuse-Questionnaire (DEAQ), which evaluates elder abuse at baseline and follow-ups. Repeated measures of analysis of variance (ANOVA) and the Wilcoxon test were used to analyze the data. The repeated measures ANOVA revealed that FBCBSW was successful in reducing elder abuse. The Wilcoxon test indicated that emotional neglect, care neglect, financial neglect, curtailment of personal autonomy, psychological abuse, and financial abuse significantly decreased over time, but there was no statistically significant difference in physical abuse before and after the intervention. The findings from this study suggest that FBCBSW is a promising approach to reducing elder abuse and warrants further study with larger samples.

Differences in Empathy Levels of Medical Students Based on Gender, Year of Medical School and Career Choice.

PubMed

Tariq, Nabia; Tayyab, Ali; Jaffery, Tara

2018-04-01

To measure mean empathy scores of Pakistani medical students and to explore any association of empathy scores with gender, medical school year and future career choice. Cross-sectional survey. Shifa College of Medicine, Shifa Tameer-e-Millat University, during the academic year 2015-2016. The student version of Jefferson Scale of Physician Empathy (JSPE) was distributed to the students electronically via the student portal. Response that were completed in full were included in the study. Descriptive statistics was used to analyse student demographic data. The student score on the JSPE was reported as the mean (out of 7) of each item. Independent samples t-test was employed to check the significant differences between genders. Empathy score with advancing year of study was investigated using ANOVA. ANOVA with post-hoc Tukey's test was used to study the relationship between career choice and empathy score. The response rate was 70.94%. The mean score was 4.51 ±0.69. Females obtained greater, but statistically insignificant (p=0.08) empathy score (4.58) as compared to the male students (4.45). No statistically significant difference was seen between scores on the survey across the five academic years (F=0.88, p=0.47). Students who selected medicine and allied as career choice showed a significantly higher empathy score than those who opted for surgery. The internal consistency reliability (Cronbach's alpha) was 0.78. There were low levels of empathy in Pakistani medical students. Students with interest in medicine and allied showed higher empathy scores compared to surgical or technical specialties. No association of empathy scores with gender and medical school year was observed.

Differences in the bioenergetic potential of athletes participating in team sports.

PubMed

Malacko, Julijan; Doder, Dragan; Djurdjević, Slavisa; Savić, Biljana; Doder, Radoslava

2013-07-01

In modern training technology, assessment of aerobic bioenergetic potential in athletes is commonly performed by standard laboratory procedures to determine basic or specific functional abilities for specific sport activity or discipline. The aim of study was to assess the aerobic bioenergetic potential of athletes participating in basketball, football and handball. The study included 87 athletes (29 basketball players, 29 football players, and 29 handball players) aged 21-24. Evaluation of the aerobic bioenergetic potential of athletes participating in basketball, football and handball was performed followed by both univariate (ANOVA) and multivariate (MANOVA) statistical methods to determine differences among the athletes in relative (VO2 mL/kg/min) and absolute oxygen consumption (VO2 L/min). Statistically significant differences between absolute and relative oxygen consumption were found in basketball players (Mb), football players (Mf), and handball players (Mh) (MANOVA, p = 0.00). ANOVA also revealed significant differences in relative oxygen consumption (VO2 mL/kg/min) (p = 0.00). The football players (55.32 mL/kg/min) had the highest relative oxygen consumption, followed by the handball players (51.84 mL/kg/min) and basketball players (47.00 mL/kg/min). The highest absolute oxygen consumption was recorded in the basketball players (4.47 L/min), followed by the handball players (4.40 L/min) and footballers (4.16 L/min). Statistically significant differences in the aerobic bioenergetic potential, expressed by the relative oxygen consumption were found among atletes participating in different team sports. It can be assumed that the player from the sports in which it is necessary to cross greater distance in total during the match have a greater need for aerobic capacity.

A Comparison of Analytical and Data Preprocessing Methods for Spectral Fingerprinting

PubMed Central

LUTHRIA, DEVANAND L.; MUKHOPADHYAY, SUDARSAN; LIN, LONG-ZE; HARNLY, JAMES M.

2013-01-01

Spectral fingerprinting, as a method of discriminating between plant cultivars and growing treatments for a common set of broccoli samples, was compared for six analytical instruments. Spectra were acquired for finely powdered solid samples using Fourier transform infrared (FT-IR) and Fourier transform near-infrared (NIR) spectrometry. Spectra were also acquired for unfractionated aqueous methanol extracts of the powders using molecular absorption in the ultraviolet (UV) and visible (VIS) regions and mass spectrometry with negative (MS−) and positive (MS+) ionization. The spectra were analyzed using nested one-way analysis of variance (ANOVA) and principal component analysis (PCA) to statistically evaluate the quality of discrimination. All six methods showed statistically significant differences between the cultivars and treatments. The significance of the statistical tests was improved by the judicious selection of spectral regions (IR and NIR), masses (MS+ and MS−), and derivatives (IR, NIR, UV, and VIS). PMID:21352644

A SAS macro for testing differences among three or more independent groups using Kruskal-Wallis and Nemenyi tests.

PubMed

Liu, Yuewei; Chen, Weihong

2012-02-01

As a nonparametric method, the Kruskal-Wallis test is widely used to compare three or more independent groups when an ordinal or interval level of data is available, especially when the assumptions of analysis of variance (ANOVA) are not met. If the Kruskal-Wallis statistic is statistically significant, Nemenyi test is an alternative method for further pairwise multiple comparisons to locate the source of significance. Unfortunately, most popular statistical packages do not integrate the Nemenyi test, which is not easy to be calculated by hand. We described the theory and applications of the Kruskal-Wallis and Nemenyi tests, and presented a flexible SAS macro to implement the two tests. The SAS macro was demonstrated by two examples from our cohort study in occupational epidemiology. It provides a useful tool for SAS users to test the differences among three or more independent groups using a nonparametric method.

A LISREL Model for the Analysis of Repeated Measures with a Patterned Covariance Matrix.

ERIC Educational Resources Information Center

Rovine, Michael J.; Molenaar, Peter C. M.

1998-01-01

Presents a LISREL model for the estimation of the repeated measures analysis of variance (ANOVA) with a patterned covariance matrix. The model is demonstrated for a 5 x 2 (Time x Group) ANOVA in which the data are assumed to be serially correlated. Similarities with the Statistical Analysis System PROC MIXED model are discussed. (SLD)

Using the bootstrap to establish statistical significance for relative validity comparisons among patient-reported outcome measures

PubMed Central

2013-01-01

Background Relative validity (RV), a ratio of ANOVA F-statistics, is often used to compare the validity of patient-reported outcome (PRO) measures. We used the bootstrap to establish the statistical significance of the RV and to identify key factors affecting its significance. Methods Based on responses from 453 chronic kidney disease (CKD) patients to 16 CKD-specific and generic PRO measures, RVs were computed to determine how well each measure discriminated across clinically-defined groups of patients compared to the most discriminating (reference) measure. Statistical significance of RV was quantified by the 95% bootstrap confidence interval. Simulations examined the effects of sample size, denominator F-statistic, correlation between comparator and reference measures, and number of bootstrap replicates. Results The statistical significance of the RV increased as the magnitude of denominator F-statistic increased or as the correlation between comparator and reference measures increased. A denominator F-statistic of 57 conveyed sufficient power (80%) to detect an RV of 0.6 for two measures correlated at r = 0.7. Larger denominator F-statistics or higher correlations provided greater power. Larger sample size with a fixed denominator F-statistic or more bootstrap replicates (beyond 500) had minimal impact. Conclusions The bootstrap is valuable for establishing the statistical significance of RV estimates. A reasonably large denominator F-statistic (F > 57) is required for adequate power when using the RV to compare the validity of measures with small or moderate correlations (r < 0.7). Substantially greater power can be achieved when comparing measures of a very high correlation (r > 0.9). PMID:23721463

Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods

PubMed Central

Digholkar, Shruti; Madhav, V. N. V.; Palaskar, Jayant

2016-01-01

Purpose: The purpose of this study was to evaluate and compare the flexural strength and microhardness of provisional restorative materials fabricated utilizing rapid prototyping (RP), Computer Assisted Designing and Computer Assisted Milling (CAD-CAM) and conventional method. Materials and Methods: Twenty specimens of dimensions 25 mm × 2 mm × 2 mm (ADA-ANSI specification #27) were fabricated each using: (1) Three dimensional (3D) printed light-cured micro-hybrid filled composite by RP resin group, (2) a milled polymethyl methacrylate (CH) using CAD-CAM (CC resin group), and (3) a conventionally fabricated heat activated polymerized CH resin group. Flexural strength and microhardness were measured and values obtained were evaluated. Results: The measured mean flexural strength values (MegaPascals) were 79.54 (RP resin group), 104.20 (CC resin group), and 95.58 (CH resin group). The measured mean microhardness values (Knoop hardness number) were 32.77 (RP resin group), 25.33 (CC resin group), and 27.36 (CH resin group). The analysis of variance (ANOVA) test shows that there is statistically significant difference in the flexural strength values of the three groups (P < 0.05). According to the pairwise comparison of Tukey's honest significant difference (HSD) test, flexural strength values of CC resin group and CH resin group were higher and statistically significant than those of the RP resin group (P < 0.05). However, there was no significant difference between flexural strength values of CC resin and CH resin group (P = 0.64). The difference in microhardness values of the three groups was statistically significant according to ANOVA as well as the intergroup comparison done using the Tukey's HSD (post hoc) test (P < 0.05). Conclusions: CC-based CH had the highest flexural strength whereas RP-based 3D printed and light cured micro-hybrid filled composite had the highest microhardness. PMID:27746595

Anterior Tibial Translation in Collegiate Athletes with Normal Anterior Cruciate Ligament Integrity

PubMed Central

Rosene, John M.; Fogarty, Tracey D.

1999-01-01

Objective: To examine differences in anterior tibial translation (ATT) among sports, sex, and leg dominance in collegiate athletes with normal anterior cruciate ligament integrity. Design and Setting: Subjects from various athletic teams were measured for ATT in right and left knees. Subjects: Sixty subjects were measured for ATT with a KT-1000 knee arthrometer. Measurements: Statistical analyses were computed for each sex and included a 2 × 3 × 4 mixed-factorial analysis of variance (ANOVA) for anterior cruciate ligament displacement, right and left sides, and force and sport. A 2 × 2 × 3 mixed-factorial ANOVA was computed to compare means for sex and force. A 2 × 3 mixed-factorial ANOVA was computed to compare sex differences across 3 forces. Results: For males and females, no significant interactions were found among leg, force, and sport for mean ATT, for leg and sport or leg and force, or for translation values between dominant and nondominant legs. Males had a significant interaction for force and sport, and a significant difference was found for side of body, since the right side had less translation than the left side. Females had greater ATT than males at all forces. Conclusions: Sex differences exist for ATT, and differences in ATT exist among sports for both sexes. Differences between the right and left sides of the body should be expected when making comparisons of ligamentous laxity. ImagesFigure 2.Figure 3.Figure 5. PMID:16558565

Assessment of nickel release from various dental appliances used routinely in pediatric dentistry.

PubMed

Kulkarni, Parimala; Agrawal, Suchi; Bansal, Arpana; Jain, Ankur; Tiwari, Utkarsh; Anand, Ayushi

2016-01-01

The use of nickel-containing alloys in dentistry has been questioned because of the biological liabilities of nickel and the release of nickel ions from dental appliances into the oral cavity. The potential health hazards of nickel and chromium and their compounds have been the focus of attention for more than 100 years. It has established that these metals could cause hypersensitivity. To assess the nickel release from various dental appliances used in pediatric dentistry. It is a in vitro study. The study was undertaken to analyze in vitro biodegradation of space maintainers and stainless steel crowns made out of stainless steel materials from different manufacturers. The leaching effect simulating the use of clinical practice was studied by keeping the respective number of Stainless Steel Crowns and space maintainers in the artificial saliva incubating at 37°C and analyzing for nickel release after 1,7,14,21 and 28 days using atomic absorption spectrophotometer. The results were statistically analyzed by using One way ANOVA and repeated measures of ANOVA was applied at different time intervals i.e. 1,7,14,21,28 days. The critical value for statistical significance was set at P = 0.05. Results showed that there was measurable release of nickel which reached maximum level at the end of 7 days which was statistically significant (P < 0.05). The release of nickel and chromium very much below when compared with the average dietary intake of nickel (200-300 ppm/day) which were not capable of causing any toxic effects.

Spectral transmittance of UV-blocking soft contact lenses: a comparative study.

PubMed

Rahmani, Saeed; Mohammadi Nia, Mohadeseh; Akbarzadeh Baghban, Alireza; Nazari, Mohammad Reza; Ghassemi-Broumand, Mohammad

2014-12-01

Three major parts of sunlight consist of visible, ultraviolet and infrared radiation. Exposure to ultraviolet radiation (UVR) can result in a spectrum of skin and ocular diseases. UV-blocking contact lenses help provide protection against harmful UV radiation. We studied the ultraviolet and visible light rays transmission in some soft UV-blocking contact lenses. Four available tinted soft lenses (Acuvue Moist, Zeiss CONTACT Day 30 Air spheric, Pretty Eyes and Sauflon 56 UV) have been evaluated for UV and visible transmission. One-way ANOVA testing was performed to establish is there a statistically significant difference between the UV regions and visible spectra means for the contact lenses (α=0.05). Pretty Eyes, Zeiss CONTACT, Acuvue Moist and Sauflon 56 UV showed UV-B transmittance value of 0.65%, 10.69%, 1.22%, and 5.78%, respectively. Pretty Eyes and Acuvue Moist had UV-A transmittance values of 32% and 34%, Sauflon 56 UV and Zeiss CONTACT had transmittance values of 48% and 43%, respectively. All of the studied lenses transmitted at least 94.6% on the visible spectrum. The results of the one-way ANOVA statistical analysis show that a statistically significant difference exists within the group of contact lenses tested for the visible (p<0.001), UV-B (p<0.001) and UV-A (p<0.001) portions of the spectrum (α=0.05). Acuvue Moist has the best UV-blocking property and also visible transmission between other tested contact lenses in this study. Copyright © 2014 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

Improved Test Planning and Analysis Through the Use of Advanced Statistical Methods

NASA Technical Reports Server (NTRS)

Green, Lawrence L.; Maxwell, Katherine A.; Glass, David E.; Vaughn, Wallace L.; Barger, Weston; Cook, Mylan

2016-01-01

The goal of this work is, through computational simulations, to provide statistically-based evidence to convince the testing community that a distributed testing approach is superior to a clustered testing approach for most situations. For clustered testing, numerous, repeated test points are acquired at a limited number of test conditions. For distributed testing, only one or a few test points are requested at many different conditions. The statistical techniques of Analysis of Variance (ANOVA), Design of Experiments (DOE) and Response Surface Methods (RSM) are applied to enable distributed test planning, data analysis and test augmentation. The D-Optimal class of DOE is used to plan an optimally efficient single- and multi-factor test. The resulting simulated test data are analyzed via ANOVA and a parametric model is constructed using RSM. Finally, ANOVA can be used to plan a second round of testing to augment the existing data set with new data points. The use of these techniques is demonstrated through several illustrative examples. To date, many thousands of comparisons have been performed and the results strongly support the conclusion that the distributed testing approach outperforms the clustered testing approach.

Digital versus conventional techniques for pattern fabrication of implant-supported frameworks

PubMed Central

Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

2018-01-01

Objective: The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Materials and Methods: Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method (n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal–Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. Statistical Analysis Used: One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. Results: The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups (P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group (P < 0.001), while there was no significant difference between the two other groups (P = 0.54). CAD/CAM group required significantly more adjustments (P < 0.001). Conclusions: CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations. PMID:29657528

Self esteem and organizational commitment among health information management staff in tertiary care hospitals in Tehran.

PubMed

Sadoughi, Farahnaz; Ebrahimi, Kamal

2014-12-12

Self esteem (SE) and organizational commitment (OC)? have significant impact on the quality of work life. This study aims to gain a better understanding of the relationships between SE and OC among health information management staff in tertiary care hospitals in Tehran (Iran). This was a descriptive correlational and cross sectional study conducted on the health information management staff of tertiary care hospitals in Tehran, Iran. A total of 155 participants were randomly selected from 400 staff. Data were collected by two standard questionnaires. The SE and OC was measured using Eysenck SE scale and Meyer and Allen's three component model, respectively. The collected data were analyzed with the SPSS (version 16) using statistical tests of of independent T-test, Pearson Correlation coefficient, one way ANOVA and F tests. The OC and SE of the employees' were 67.8?, out of 120 (weak) and 21.0 out of 30 (moderate), respectively. The values for affective commitment, normative commitment, and continuance commitment were respectively 21.3 out of 40 (moderate), 23.9 out of 40 (moderate), and 22.7 out of 40 (moderate). The Pearson correlation coefficient test showed a significant OC and SE was statistically significant (P<0.05). The one way ANOVA test (P<0.05) did not show any significant difference between educational degree and work experience with SE and OC. This research showed that SE and OC ?are moderate. SE and OC have strong correlation with turnover, critical thinking, job satisfaction, and individual and organizational improvement. Therefore, applying appropriate human resource policies is crucial to reinforce these measures.

Brushing force of manual and sonic toothbrushes affects dental hard tissue abrasion.

PubMed

Wiegand, Annette; Burkhard, John Patrik Matthias; Eggmann, Florin; Attin, Thomas

2013-04-01

This study aimed to determine the brushing forces applied during in vivo toothbrushing with manual and sonic toothbrushes and to analyse the effect of these brushing forces on abrasion of sound and eroded enamel and dentin in vitro. Brushing forces of a manual and two sonic toothbrushes (low and high frequency mode) were measured in 27 adults before and after instruction of the respective brushing technique and statistically analysed by repeated measures analysis of variance (ANOVA). In the in vitro experiment, sound and eroded enamel and dentin specimens (each subgroup n = 12) were brushed in an automatic brushing machine with the respective brushing forces using a fluoridated toothpaste slurry. Abrasion was determined by profilometry and statistically analysed by one-way ANOVA. Average brushing force of the manual toothbrush (1.6 ± 0.3 N) was significantly higher than for the sonic toothbrushes (0.9 ± 0.2 N), which were not significantly different from each other. Brushing force prior and after instruction of the brushing technique was not significantly different. The manual toothbrush caused highest abrasion of sound and eroded dentin, but lowest on sound enamel. No significant differences were detected on eroded enamel. Brushing forces of manual and sonic toothbrushes are different and affect their abrasive capacity. Patients with severe tooth wear and exposed and/or eroded dentin surfaces should use sonic toothbrushes to reduce abrasion, while patients without tooth wear or with erosive lesions confining only to enamel do not benefit from sonic toothbrushes with regard to abrasion.

Effect of saliva contamination on cementation of orthodontic brackets using different adhesive systems.

PubMed

Robaski, Aliden-Willian; Pamato, Saulo; Tomás-de Oliveira, Marcelo; Pereira, Jefferson-Ricardo

2017-07-01

The enamel condition and the quality of surface are points that need to be considered for achieving optimal efficiency in the treatment with orthodontic brackets. The aim of this study was to assess the immediate bond strength of metallic brackets cemented to dental. Forty human premolars were double-sectioned, placed in PVC matrices and randomly divided into 10 groups (n=8). They received artificial saliva contamination before or after the application of adhesive systems, except for the control groups. The metallic brackets were cemented using two orthodontic cements (Transbond™ Plus Color Change, 3M Unitek e Transbond™ XT Light, 3M Unitek). The specimens were subjected to mechanical shear bond strength testing and classified according to the fracture pattern. The results were analyzed using a two-way ANOVA and Tukey's test for multiple comparisons ( p <0.05). ANOVA analysis showed statistically significant differences between the groups ( p =0.01). The Tukey's multiple comparison test indicated statistically significant difference between G6 and G7 groups ( p <0.05). A high prevalence of adhesive failure in the groups receiving the hydrophobic adhesive system. The saliva contamination prior to the application of a hydrophobic simplified conventional adhesive system was responsible for decreasing the immediate bond strength values of brackets cemented on the dental enamel. Key words: Bonding, orthodontic brackets, shear bond strength, saliva, adhesive systems.

Morphometric analysis of root canal cleaning after rotary instrumentation with or without laser irradiation

NASA Astrophysics Data System (ADS)

Marchesan, Melissa A.; Geurisoli, Danilo M. Z.; Brugnera, Aldo, Jr.; Barbin, Eduardo L.; Pecora, Jesus D.

2002-06-01

The present study examined root canal cleaning, using the optic microscope, after rotary instrumentation with ProFile.04 with or without laser application with different output energies. Cleaning and shaping can be accomplished manually, with ultra-sonic and sub-sonic devices, with rotary instruments and recently, increasing development in laser radiation has shown promising results for disinfection and smear layer removal. In this study, 30 palatal maxillary molar roots were examined using an optic microscope after rotary instrumentation with ProFile .04 with or without Er:YAG laser application (KaVo KeyLaser II, Germany) with different output energies (2940 nm, 15 Hz, 300 pulses, 500 milli-sec duration, 42 J, 140 mJ showed on the display- input, 61 mJ at fiberoptic tip-output and 140 mJ showed on the display-input and 51 mJ at fiberoptic tip-output). Statistical analysis showed no statistical differences between the tested treatments (ANOVA, p>0.05). ANOVA also showed a statistically significant difference (p<0.01) between the root canal thirds, indicating that the middle third had less debris than the apical third. We conclude that: 1) none of the tested treatments led to totally cleaned root canals; 2) all treatments removed debris similarly, 3) the middle third had less debris than the apical third; 4) variation in output energy did not increase cleaning.

Adaptive statistical iterative reconstruction improves image quality without affecting perfusion CT quantitation in primary colorectal cancer.

PubMed

Prezzi, D; Goh, V; Virdi, S; Mallett, S; Grierson, C; Breen, D J

2017-01-01

To determine the effect of Adaptive Statistical Iterative Reconstruction (ASIR) on perfusion CT (pCT) parameter quantitation and image quality in primary colorectal cancer. Prospective observational study. Following institutional review board approval and informed consent, 32 patients with colorectal adenocarcinoma underwent pCT (100 kV, 150 mA, 120 s acquisition, axial mode). Tumour regional blood flow (BF), blood volume (BV), mean transit time (MTT) and permeability surface area product (PS) were determined using identical regions-of-interests for ASIR percentages of 0%, 20%, 40%, 60%, 80% and 100%. Image noise, contrast-to-noise ratio (CNR) and pCT parameters were assessed across ASIR percentages. Coefficients of variation (CV), repeated measures analysis of variance (rANOVA) and Spearman' rank order correlation were performed with statistical significance at 5%. With increasing ASIR percentages, image noise decreased by 33% while CNR increased by 61%; peak tumour CNR was greater than 1.5 with 60% ASIR and above. Mean BF, BV, MTT and PS differed by less than 1.8%, 2.9%, 2.5% and 2.6% across ASIR percentages. CV were 4.9%, 4.2%, 3.3% and 7.9%; rANOVA P values: 0.85, 0.62, 0.02 and 0.81 respectively. ASIR improves image noise and CNR without altering pCT parameters substantially.

Modelling the effect of structural QSAR parameters on skin penetration using genetic programming

NASA Astrophysics Data System (ADS)

Chung, K. K.; Do, D. Q.

2010-09-01

In order to model relationships between chemical structures and biological effects in quantitative structure-activity relationship (QSAR) data, an alternative technique of artificial intelligence computing—genetic programming (GP)—was investigated and compared to the traditional method—statistical. GP, with the primary advantage of generating mathematical equations, was employed to model QSAR data and to define the most important molecular descriptions in QSAR data. The models predicted by GP agreed with the statistical results, and the most predictive models of GP were significantly improved when compared to the statistical models using ANOVA. Recently, artificial intelligence techniques have been applied widely to analyse QSAR data. With the capability of generating mathematical equations, GP can be considered as an effective and efficient method for modelling QSAR data.

Statistical Tutorial | Center for Cancer Research

Cancer.gov

Recent advances in cancer biology have resulted in the need for increased statistical analysis of research data.  ST is designed as a follow up to Statistical Analysis of Research Data (SARD) held in April 2018.  The tutorial will apply the general principles of statistical analysis of research data including descriptive statistics, z- and t-tests of means and mean differences, simple and multiple linear regression, ANOVA tests, and Chi-Squared distribution.

Modeling the low-velocity impact characteristics of woven glass epoxy composite laminates using artificial neural networks

NASA Astrophysics Data System (ADS)

Mathivanan, N. Rajesh; Mouli, Chandra

2012-12-01

In this work, a new methodology based on artificial neural networks (ANN) has been developed to study the low-velocity impact characteristics of woven glass epoxy laminates of EP3 grade. To train and test the networks, multiple impact cases have been generated using statistical analysis of variance (ANOVA). Experimental tests were performed using an instrumented falling-weight impact-testing machine. Different impact velocities and impact energies on different thicknesses of laminates were considered as the input parameters of the ANN model. This model is a feed-forward back-propagation neural network. Using the input/output data of the experiments, the model was trained and tested. Further, the effects of the low-velocity impact response of the laminates at different energy levels were investigated by studying the cause-effect relationship among the influential factors using response surface methodology. The most significant parameter is determined from the other input variables through ANOVA.

The comet assay for the evaluation of genotoxic potential of landfill leachate.

PubMed

Widziewicz, Kamila; Kalka, Joanna; Skonieczna, Magdalena; Madej, Paweł

2012-01-01

Genotoxic assessment of landfill leachate before and after biological treatment was conducted with two human cell lines (Me45 and NHDF) and Daphnia magna somatic cells. The alkali version of comet assay was used to examine genotoxicity of leachate by DNA strand breaks analysis and its repair dynamics. The leachate samples were collected from Zabrze landfill, situated in the Upper Silesian Industrial District, Poland. Statistically significant differences (Kruskal-Wallice ANOVA rank model) were observed between DNA strand breaks in cells incubated with leachate before and after treatment (P < 0.001). Nonparametric Friedman ANOVA confirmed time-reliable and concentration-reliable cells response to leachate concentration. Examinations of chemical properties showed a marked decrease in leachate parameters after treatment which correlate to reduced genotoxicity towards tested cells. Obtained results demonstrate that biological cotreatment of leachate together with municipal wastewater is an efficient method for its genotoxic potential reduction; however, treated leachate still possessed genotoxic character.

Flow Injection Mass Spectral Fingerprints Demonstrate Chemical Differences in Rio Red Grapefruit with Respect to Year, Harvest Time, and Conventional versus Organic Farming

PubMed Central

Chen, Pei; Harnly, James M.; Lester, Gene E.

2013-01-01

Spectral fingerprints were acquired for Rio Red grapefruit using flow injection electrospray ionization with ion trap and time-of-flight mass spectrometry (FI-ESI-IT-MS and FI-ESI-TOF-MS). Rio Red grapefruits were harvested 3 times a year (early, mid, and late harvests) in 2005 and 2006 from conventionally and organically grown trees. Data analysis using analysis of variance principal component analysis (ANOVA-PCA) demonstrated that, for both MS systems, the chemical patterns were different as a function of farming mode (conventional vs organic), as well as growing year and time of harvest. This was visually obvious with PCA and was shown to be statistically significant using ANOVA. The spectral fingerprints provided a more inclusive view of the chemical composition of the grapefruit and extended previous conclusions regarding the chemical differences between conventionally and organically grown Rio Red grapefruit. PMID:20337420

The Comet Assay for the Evaluation of Genotoxic Potential of Landfill Leachate

PubMed Central

Widziewicz, Kamila; Kalka, Joanna; Skonieczna, Magdalena; Madej, Paweł

2012-01-01

Genotoxic assessment of landfill leachate before and after biological treatment was conducted with two human cell lines (Me45 and NHDF) and Daphnia magna somatic cells. The alkali version of comet assay was used to examine genotoxicity of leachate by DNA strand breaks analysis and its repair dynamics. The leachate samples were collected from Zabrze landfill, situated in the Upper Silesian Industrial District, Poland. Statistically significant differences (Kruskal-Wallice ANOVA rank model) were observed between DNA strand breaks in cells incubated with leachate before and after treatment (P < 0.001). Nonparametric Friedman ANOVA confirmed time-reliable and concentration-reliable cells response to leachate concentration. Examinations of chemical properties showed a marked decrease in leachate parameters after treatment which correlate to reduced genotoxicity towards tested cells. Obtained results demonstrate that biological cotreatment of leachate together with municipal wastewater is an efficient method for its genotoxic potential reduction; however, treated leachate still possessed genotoxic character. PMID:22666120

Effects of Laser Treatment on the Bond Strength of Differently Sintered Zirconia Ceramics.

PubMed

Dede, Doğu Ömür; Yenisey, Murat; Rona, Nergiz; Öngöz Dede, Figen

2016-07-01

The purpose of this study was to investigate the effects of carbon dioxide (CO2) and Erbium-doped yttrium aluminum garnet (Er:YAG) laser irradiations on the shear bond strength (SBS) of differently sintered zirconia ceramics to resin cement. Eighty zirconia specimens were prepared, sintered in two different periods (short = Ss, long = Ls), and divided into four treatment groups (n = 10 each). These groups were (a) untreated (control), (b) Er:YAG laser irradiated with 6 W power for 5 sec, (c) CO2 laser with 2 W power for 10 sec, (d) CO2 laser with 4 W power for 10 sec. Scanning electron microscope (SEM) images were recorded for each of the eight groups. Eighty composite resin discs (3 × 3 mm) were fabricated and cemented with an adhesive resin cement to ceramic specimens. The SBS test was performed after specimens were stored in water for 24 h by an universal testing machine at a crosshead speed of 1 mm/min. Data were statistically analyzed with two way analysis of variance (ANOVA) and Tukey honest significant difference (HSD) test (α = 0.05). According to the ANOVA, the sintering time, surface treatments and their interaction were statistically significant (p < 0.05). Although each of the laser-irradiated groups were significantly higher than the control groups, there was no statistically significant difference among them (p > 0.05). Variation in sintering time from 2.5 to 5.0 h may have influenced the SBS of Yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramics. Although CO2 and Er:YAG laser irradiation techniques may increase the SBS values of both tested zirconia ceramics, they are recommended for clinicians as an alternative pretreatment method.

Laser and plasma dental soldering techniques applied to Ti-6Al-4V alloy: ultimate tensile strength and finite element analysis.

PubMed

Castro, Morgana G; Araújo, Cleudmar A; Menegaz, Gabriela L; Silva, João Paulo L; Nóbilo, Mauro Antônio A; Simamoto Júnior, Paulo Cézar

2015-05-01

The literature provides limited information regarding the performance of Ti-6Al-4V laser and plasma joints welded in prefabricated bars in dental applications. The purpose of this study was to evaluate the mechanical strength of different diameters of Ti-6Al-4V alloy welded with laser and plasma techniques. Forty-five dumbbell-shaped rods were created from Ti-6Al-4V and divided into 9 groups (n=5): a control group with 3-mm and intact bars; groups PL2.5, PL3, PL4, and PL5 (specimens with 2.5-, 3-, 4-, and 5-mm diameters welded with plasma); and groups L2.5, L3, L4, and L5 (specimens with 2.5-, 3-, 4-, and 5-mm diameters welded with laser). The specimens were tested for ultimate tensile strength (UTS), and elongation percentages (EP) were obtained. Fractured specimens were analyzed by stereomicroscopy, and welded area percentages (WAP) were calculated. Images were made with scanning electron microscopy. In the initial analysis, the data were analyzed with a 2-way ANOVA (2×4) and the Tukey Honestly Significant Difference (HSD) test. In the second analysis, the UTS and EP data were analyzed with 1-way ANOVA, and the Dunnett test was used to compare the 4 experimental groups with the control group (α=.05). The Pearson and Spearman correlation coefficient tests were applied to correlate the study factors. Finite element models were developed in a workbench environment with boundary conditions simulating those of a tensile test. The 2-way ANOVA showed that the factors welding type and diameter were significant for the UTS and WAP values. However, the interaction between them was not significant. The 1-way ANOVA showed statistically significant differences among the groups for UTS, WAP, and EP values. The Dunnett test showed that all the tested groups had lower UTS and EP values than the control group. The 2.5- and 3-mm diameter groups showed higher values for UTS and WAP than the other test groups. A positive correlation was found between welded area percentage and UTS and a negative correlation between these parameters and the diameters of the specimens. No statistically significant difference was found between the weld techniques. Under the experimental conditions described, diameters of 2.5 and 3 mm resulted in higher UTS and WAP for both laser and plasma welding and appear to be the best option for joining prefabricated rods in this kind of union. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Fracture load and failure analysis of zirconia single crowns veneered with pressed and layered ceramics after chewing simulation.

PubMed

Stawarczyk, Bogna; Ozcan, Mutlu; Roos, Malgorzata; Trottmann, Albert; Hämmerle, Christoph H F

2011-01-01

This study determined the fracture load of zirconia crowns veneered with four overpressed and four layered ceramics after chewing simulation. The veneered zirconia crowns were cemented and subjected to chewing cycling. Subsequently, the specimens were loaded at an angle of 45° in a Universal Testing Machine to determine the fracture load. One-way ANOVA, followed by a post-hoc Scheffé test, t-test and Weibull statistic were performed. Overpressed crowns showed significantly lower fracture load (543-577 N) compared to layered ones (805-1067 N). No statistical difference was found between the fracture loads within the overpressed group. Within the layered groups, LV (1067 N) presented significantly higher results compared to LC (805 N). The mean values of all other groups were not significantly different. Single zirconia crowns veneered with overpressed ceramics exhibited lower fracture load than those of the layered ones after chewing simulation.

Effects of growth hormone and testosterone therapy on aerobic and anaerobic fitness, body composition and lipoprotein profile in middle-aged men.

PubMed

Zając, Adam; Wilk, Michał; Socha, Teresa; Maszczyk, Adam; Chycki, Jakub

2014-01-01

Andropause and aging are associated with neuroendocrine dysfunctions. Growth hormone and testosterone play a significant role in several processes affecting adaptation and thereby also everyday functioning. The aim of this research project was to evaluate the effects of recombinant human growth hormone and testosterone enanthate injections on body mass and body composition, aerobic and anaerobic fitness and lipid profile in middle-aged men. The research group was comprised of 14 men aged 45 - 60 years. Two series of laboratory analyses were performed. Independent tests were carried out at baseline and after 12 weeks of the experiment. The data were analyzed using Statistica 9.1 software. A two-way repeated measures ANOVA revealed a statistically significant effect of the intervention programme on fat-free mass (η(2)=0.34), total body fat (η(2)=0.79), total cholesterol (η(2)=0.30), high-density lipoprotein cholesterol (η(2)=0.31), low-density lipoprotein cholesterol (η(2)=0.42), triglyceride (η(2)=0.28), testosterone (η(2)=0.52), insulin-like growth factor 1 (η(2)=0.47) and growth hormone (η(2)=0.63). Furthermore, ANOVA revealed a statistically significant effect of the rhGH and T treatment on maximal oxygen uptake (η(2)=0.63), anaerobic threshold (η(2)=0.61) and maximal work rate (η(2)=0.53). It should be emphasized that the lipid profile was affected not only by rhGH+T replacement therapy, but also by the prescribed physical activity programme. The strength and endurance fitness programme alone did not cause significant changes in body mass and composition, nor the anaerobic and aerobic capacity. On the other hand, the rhGH=T treatment stimulated these changes significantly.

Effect of repeated cycles of chemical disinfection on the roughness and hardness of hard reline acrylic resins.

PubMed

Pinto, Luciana de Rezende; Acosta, Emílio José T Rodríguez; Távora, Flora Freitas Fernandes; da Silva, Paulo Maurício Batista; Porto, Vinícius Carvalho

2010-06-01

The aim of this study was to assess the effect of repeated cycles of five chemical disinfectant solutions on the roughness and hardness of three hard chairside reliners. A total of 180 circular specimens (30 mm x 6 mm) were fabricated using three hard chairside reliners (Jet; n = 60, Kooliner; n = 60, Tokuyama Rebase II Fast; n = 60), which were immersed in deionised water (control), and five disinfectant solutions (1%, 2%, 5.25% sodium hypochlorite; 2% glutaraldehyde; 4% chlorhexidine gluconate). They were tested for Knoop hardness (KHN) and surface roughness (microm), before and after 30 simulated disinfecting cycles. Data was analysed by the factorial scheme (6 x 2), two-way analysis of variance (anova), followed by Tukey's test. For Jet (from 18.74 to 13.86 KHN), Kooliner (from 14.09 to 8.72 KHN), Tokuyama (from 12.57 to 8.28 KHN) a significant decrease in hardness was observed irrespective of the solution used on all materials. For Jet (from 0.09 to 0.11 microm) there was a statistically significant increase in roughness. Kooliner (from 0.36 to 0.26 microm) presented a statistically significant decrease in roughness and Tokuyama (from 0.15 to 0.11 microm) presented no statistically significant difference after 30 days. This study showed that all disinfectant solutions promoted a statistically significant decrease in hardness, whereas with roughness, the materials tested showed a statistically significant increase, except for Tokuyama. Although statistically significant values were registered, these results could not be considered clinically significant.

An Analysis of Research Methods and Statistical Techniques Used by Doctoral Dissertation at the Education Sciences in Turkey

ERIC Educational Resources Information Center

Karadag, Engin

2010-01-01

To assess research methods and analysis of statistical techniques employed by educational researchers, this study surveyed unpublished doctoral dissertation from 2003 to 2007. Frequently used research methods consisted of experimental research; a survey; a correlational study; and a case study. Descriptive statistics, t-test, ANOVA, factor…

A study on the compatibility between one-bottle dentin adhesives and composite resins using micro-shear bond strength.

PubMed

Song, Minju; Shin, Yooseok; Park, Jeong-Won; Roh, Byoung-Duck

2015-02-01

This study was performed to determine whether the combined use of one-bottle self-etch adhesives and composite resins from same manufacturers have better bond strengths than combinations of adhesive and resins from different manufacturers. 25 experimental micro-shear bond test groups were made from combinations of five dentin adhesives and five composite resins with extracted human molars stored in saline for 24 hr. Testing was performed using the wire-loop method and a universal testing machine. Bond strength data was statistically analyzed using two way analysis of variance (ANOVA) and Tukey's post hoc test. Two way ANOVA revealed significant differences for the factors of dentin adhesives and composite resins, and significant interaction effect (p < 0.001). All combinations with Xeno V (Dentsply De Trey) and Clearfil S(3) Bond (Kuraray Dental) adhesives showed no significant differences in micro-shear bond strength, but other adhesives showed significant differences depending on the composite resin (p < 0.05). Contrary to the other adhesives, Xeno V and BondForce (Tokuyama Dental) had higher bond strengths with the same manufacturer's composite resin than other manufacturer's composite resin. Not all combinations of adhesive and composite resin by same manufacturers failed to show significantly higher bond strengths than mixed manufacturer combinations.

An ANOVA approach for statistical comparisons of brain networks.

PubMed

Fraiman, Daniel; Fraiman, Ricardo

2018-03-16

The study of brain networks has developed extensively over the last couple of decades. By contrast, techniques for the statistical analysis of these networks are less developed. In this paper, we focus on the statistical comparison of brain networks in a nonparametric framework and discuss the associated detection and identification problems. We tested network differences between groups with an analysis of variance (ANOVA) test we developed specifically for networks. We also propose and analyse the behaviour of a new statistical procedure designed to identify different subnetworks. As an example, we show the application of this tool in resting-state fMRI data obtained from the Human Connectome Project. We identify, among other variables, that the amount of sleep the days before the scan is a relevant variable that must be controlled. Finally, we discuss the potential bias in neuroimaging findings that is generated by some behavioural and brain structure variables. Our method can also be applied to other kind of networks such as protein interaction networks, gene networks or social networks.

The impact of science notebook writing on ELL and low-SES students' science language development and conceptual understanding

NASA Astrophysics Data System (ADS)

Huerta, Margarita

This quantitative study explored the impact of literacy integration in a science inquiry classroom involving the use of science notebooks on the academic language development and conceptual understanding of students from diverse (i.e., English Language Learners, or ELLs) and low socio-economic status (low-SES) backgrounds. The study derived from a randomized, longitudinal, field-based NSF funded research project (NSF Award No. DRL - 0822343) targeting ELL and non-ELL students from low-SES backgrounds in a large urban school district in Southeast Texas. The study used a scoring rubric (modified and tested for validity and reliability) to analyze fifth-grade school students' science notebook entries. Scores for academic language quality (or, for brevity, language ) were used to compare language growth over time across three time points (i.e., beginning, middle, and end of the school year) and to compare students across categories (ELL, former ELL, non-ELL, and gender) using descriptive statistics and mixed between-within subjects analysis of variance (ANOVA). Scores for conceptual understanding (or, for brevity, concept) were used to compare students across categories (ELL, former ELL, non-ELL, and gender) in three domains using descriptive statistics and ANOVA. A correlational analysis was conducted to explore the relationship, if any, between language scores and concept scores for each group. Students demonstrated statistically significant growth over time in their academic language as reflected by science notebook scores. While ELL students scored lower than former ELL and non-ELL students at the first two time points, they caught up to their peers by the third time point. Similarly, females outperformed males in language scores in the first two time points, but males caught up to females in the third time point. In analyzing conceptual scores, ELLs had statistically significant lower scores than former-ELL and non-ELL students, and females outperformed males in the first two domains. These differences, however, were not statistically significant in the last domain. Last, correlations between language and concept scores were overall, positive, large, and significant across domains and groups. The study presents a rubric useful for quantifying diverse students' science notebook entries, and findings add to the sparse research on the impact of writing in diverse students' language development and conceptual understanding in science.

Effect of Erythrinamu lungu on anxiety during extraction of third molars.

PubMed

Silveira-Souto, Maria-Luisa; São-Mateus, Carla-Rocha; de Almeida-Souza, Liane-Maciel; Groppo, Francisco-Carlos

2014-09-01

The aim of the present study was to evaluate the effect of Erythrinamu lungu on the control of dental anxiety in patients who had under gone bilateral extraction of asymptomatic, impacted mandibular third molars. In a randomized, double-blind, crossover study, 30 healthy volunteers (5 men and 25 women, over 18 years of age), received either 500mg of E.mulungu (MulunguMatusa®) or 500 mg of placebo, p.o., one hour before surgical procedure. The level ofanxiety was assessed through questionnaire sand physical parameters, such as blood pressure, heart rate andoxygen saturation. Data were analyzed by Chi-square test, ANOVA (Tukey test) and Friedman with significance level of 5%. A higher preference (Chi-square, p = 0.0062) for E. mulungu was observed for both genders. Volunteers with higher anxiety levels tended to to prefer E. mulungu. No statistically significant differences were verified in blood pressure (one-way ANOVA, p = 0.1259), heart rate (Friedman, p> 0.05) and oxygen saturation (Friedman, p = 0.7664) among periods and types of treatments. E. mulungu showed an anxiolytic effect without significant changes in physiological parameters. It could be considered as an alternative to control the anxiety in adult patients undergoing mandibular thirdmolars surgery.

Comparison of the effect of three autogenous bone harvesting methods on cell viability in rabbits

PubMed Central

Moradi Haghgoo, Janet; Arabi, Seyed Reza; Hosseinipanah, Seyyed Mohammad; Solgi, Ghasem; Rastegarfard, Neda; Farhadian, Maryam

2017-01-01

Background. This study was designed to compare the viability of autogenous bone grafts, harvested using different methods, in order to determine the best harvesting technique with respect to more viable cells. Methods. In this animal experimental study, three harvesting methods, including manual instrument (chisel), rotary device and piezosurgery, were used for harvesting bone grafts from the lateral body of the mandible on the left and right sides of 10 rabbits. In each group, 20 bone samples were collected and their viability was assessed using MTS kit. Statistical analyses, including ANOVA and post hoc Tukey tests, were used for evaluating significant differences between the groups. Results. One-way ANOVA showed significant differences between all the groups (P=0.000). Data analysis using post hoc Tukey tests indicated that manual instrument and piezosurgery had no significant differences with regard to cell viability (P=0.749) and the cell viability in both groups was higher than that with the use of a rotary instrument (P=0.000). Conclusion. Autogenous bone grafts harvested with a manual instrument and piezosurgery had more viable cells in comparison to the bone chips harvested with a rotary device. PMID:28748046

Role strain among male RNs in the critical care setting: Perceptions of an unfriendly workplace.

PubMed

Carte, Nicholas S; Williams, Collette

2017-12-01

Traditionally, nursing has been a female-dominated profession. Men employed as registered nurses have been in the minority and little is known about the experiences of this demographic. The purpose of this descriptive, quantitative study was to understand the relationship between the variables of demographics and causes of role strain among male nurses in critical care settings. The Sherrod Role Strain Scale assesses role strain within the context of role conflict, role overload, role ambiguity and role incongruity. Data analysis of the results included descriptive and inferential statistics. Inferential statistics involved the use of repeated measures ANOVA testing for significant difference in the causes of role strain between male nurses employed in critical care settings and a post hoc comparison of specific demographic data using multivariate analyses of variance (MANOVAs). Data from 37 male nurses in critical care settings from the northeast of the United States were used to calculate descriptive statistics standard deviation, mean of the data analysis and results of the repeated ANOVA and the post hoc secondary MANOVA analysis. The descriptive data showed that all participants worked full-time. There was an even split from those participants who worked day shift (46%) vs. night shift (43%), most the participants indicated they had 15 years or more experience as an registered nurse (54%). Significant findings of this study include two causes of role strain in male nurses employed in critical care settings which are: role ambiguity and role overload based on ethnicity. Consistent with previous research findings, the results of this study suggest that male registered nurses employed in critical care settings do experience role strain. The two main causes of role strain in male nurses are role ambiguity and role overload. Copyright © 2017. Published by Elsevier Ltd.

Effect of structural parameters on burning behavior of polyester fabrics having flame retardancy property

NASA Astrophysics Data System (ADS)

Çeven, E. K.; Günaydın, G. K.

2017-10-01

The aim of this study is filling the gap in the literature about investigating the effect of yarn and fabric structural parameters on burning behavior of polyester fabrics. According to the experimental design three different fabric types, three different weft densities and two different weave types were selected and a total of eighteen different polyester drapery fabrics were produced. All statistical procedures were conducted using the SPSS Statistical software package. The results of the Analysis of Variance (ANOVA) tests indicated that; there were statistically significant (5% significance level) differences between the mass loss ratios (%) in weft and mass loss ratios (%) in warp direction of different fabrics calculated after the flammability test. The Student-Newman-Keuls (SNK) results for mass loss ratios (%) both in weft and warp directions revealed that the mass loss ratios (%) of fabrics containing Trevira CS type polyester were lower than the mass loss ratios of polyester fabrics subjected to washing treatment and flame retardancy treatment.

A Comparative Study of Shaping Ability of four Rotary Systems.

PubMed

Rubio, Jorge; Zarzosa, José Ignacio; Pallarés, Antonio

2015-12-01

This study compared the cutting area, instrumentation time, root canal anatomy preservation and non-instrumented areas obtained by F360(®), Mtwo(®), RaCe(®) and Hyflex(®) files with ISO size 35. 120 teeth with a single straight root and root canal were divided into 4 groups. Working length was calculated by using X-rays. The teeth were sectioned with a handpiece and a diamond disc, and the sections were observed with Nikon SMZ-2T stereoscopic microscope and an Intralux 4000-1 light source. The groups were adjusted with a preoperative analysis with AutoCAD. The teeth were reconstructed by a #10 K-File and epoxy glue. Each group was instrumented with one of the four file systems. The instrumentation time was calculated with a 1/100 second chronometer. The area of the thirds and root canal anatomy preservation were analyzed with AutoCAD 2013 and the non-instrumented areas with AutoCAD 2013 and SMZ-2T stereoscopic microscope. The statistical analysis was made with Levene's Test, ANOVA, Bonferroni Test and Pearson´s Chi-square. Equal variances were shown by Levene's Test (P > 0.05). ANOVA (P > 0.05) showed the absence of significant differences. There were significant differences in the instrumentation time (P < 0.05). For root canal anatomy preservation and non-instrumented areas, there were no significant differences between all systems (P > 0.05). The 4 different rotary systems produced similar cutting area, root canal anatomy preservation and non-instrumented areas. Regarding instrumentation time, F360(®) was the fastest system statistically.

A Comparative Study of Shaping Ability of four Rotary Systems

PubMed Central

Zarzosa, José Ignacio; Pallarés, Antonio

2015-01-01

Purpose This study compared the cutting area, instrumentation time, root canal anatomy preservation and non-instrumented areas obtained by F360®, Mtwo®, RaCe® and Hyflex® files with ISO size 35. Material and Methods 120 teeth with a single straight root and root canal were divided into 4 groups. Working length was calculated by using X-rays. The teeth were sectioned with a handpiece and a diamond disc, and the sections were observed with Nikon SMZ-2T stereoscopic microscope and an Intralux 4000-1 light source. The groups were adjusted with a preoperative analysis with AutoCAD. The teeth were reconstructed by a #10 K-File and epoxy glue. Each group was instrumented with one of the four file systems. The instrumentation time was calculated with a 1/100 second chronometer. The area of the thirds and root canal anatomy preservation were analyzed with AutoCAD 2013 and the non-instrumented areas with AutoCAD 2013 and SMZ-2T stereoscopic microscope. The statistical analysis was made with Levene’s Test, ANOVA, Bonferroni Test and Pearson´s Chi-square. Results Equal variances were shown by Levene’s Test (P > 0.05). ANOVA (P > 0.05) showed the absence of significant differences. There were significant differences in the instrumentation time (P < 0.05). For root canal anatomy preservation and non-instrumented areas, there were no significant differences between all systems (P > 0.05). Conclusions The 4 different rotary systems produced similar cutting area, root canal anatomy preservation and non-instrumented areas. Regarding instrumentation time, F360® was the fastest system statistically. PMID:27688412

A method for age-matched OCT angiography deviation mapping in the assessment of disease- related changes to the radial peripapillary capillaries.

PubMed

Pinhas, Alexander; Linderman, Rachel; Mo, Shelley; Krawitz, Brian D; Geyman, Lawrence S; Carroll, Joseph; Rosen, Richard B; Chui, Toco Y

2018-01-01

To present a method for age-matched deviation mapping in the assessment of disease-related changes to the radial peripapillary capillaries (RPCs). We reviewed 4.5x4.5mm en face peripapillary OCT-A scans of 133 healthy control eyes (133 subjects, mean 41.5 yrs, range 11-82 yrs) and 4 eyes with distinct retinal pathologies, obtained using spectral-domain optical coherence tomography angiography. Statistical analysis was performed to evaluate the impact of age on RPC perfusion densities. RPC density group mean and standard deviation maps were generated for each decade of life. Deviation maps were created for the diseased eyes based on these maps. Large peripapillary vessel (LPV; noncapillary vessel) perfusion density was also studied for impact of age. Average healthy RPC density was 42.5±1.47%. ANOVA and pairwise Tukey-Kramer tests showed that RPC density in the ≥60yr group was significantly lower compared to RPC density in all younger decades of life (p<0.01). Average healthy LPV density was 21.5±3.07%. Linear regression models indicated that LPV density decreased with age, however ANOVA and pairwise Tukey-Kramer tests did not reach statistical significance. Deviation mapping enabled us to quantitatively and visually elucidate the significance of RPC density changes in disease. It is important to consider changes that occur with aging when analyzing RPC and LPV density changes in disease. RPC density, coupled with age-matched deviation mapping techniques, represents a potentially clinically useful method in detecting changes to peripapillary perfusion in disease.

The effect of prolonged storage and disinfection on the dimensional stability of 5 vinyl polyether silicone impression materials.

PubMed

Nassar, Usama; Flores-Mir, Carlos; Heo, Giseon; Torrealba, Ysidora

2017-06-01

Vinyl polyether silicone (VPES) has a different composition from other elastomeric impression materials as it combines vinyl polysiloxane (VPS) and polyether (PE). Therefore, it is important to study its properties and behavior under different test conditions. This study investigated the dimensional stability of 5 VPES consistencies when stored for up to 2 weeks, with and without using a standard disinfection procedure. 40 discs of each VPES consistency (total 200) were made using a stainless steel die and ring as described by ANSI /ADA specification No. 19. 20 discs of each material were immersed in a 2.5% buffered glutaraldehyde solution for 30 minutes. Dimensional stability measurements were calculated immediately after fabrication and repeated on the same discs after 7 and 14 days of storage. The data was analyzed using two-way ANOVA with a significance level set at α = 0.05. The discs mean contraction was below 0.5% at all test times ranging from 0.200 ± 0.014 to 0.325 ± 0.007. Repeated measures ANOVA showed a statistically significant difference after 2-week storage between the disinfected and non-disinfected groups ( P < .001). Although there was no statistically significant difference between the materials at the time of fabrication, the contraction of the materials increased with storage for 1 and 2 weeks. The dimensional changes of VPES impression discs after disinfection and prolonged storage complied with ANSI/ADA standard. The tested VPES impression materials were dimensionally stable for clinical use after disinfection for 30 minutes in glutaraldehyde and storage for up to 2 weeks.

Comparison between Growth Patterns and Pharyngeal Widths in Different Skeletal Malocclusions in South Indian Population.

PubMed

Lakshmi, K Bhagya; Yelchuru, Sri Harsha; Chandrika, V; Lakshmikar, O G; Sagar, V Lakshmi; Reddy, G Vivek

2018-01-01

The main aim is to determine whether growth pattern had an effect on the upper airway by comparing different craniofacial patterns with pharyngeal widths and its importance during the clinical examination. Sixty lateral cephalograms of patients aged between 16 and 24 years with no pharyngeal pathology or nasal obstruction were selected for the study. These were divided into skeletal Class I ( n = 30) and skeletal Class II ( n = 30) using ANB angle subdivided into normodivergent, hyperdivergent, and hypodivergent facial patterns based on SN-GoGn angle. McNamara's airway analysis was used to determine the upper- and lower-airway dimensions. One-way ANOVA was used to do the intergroup comparisons and the Tukey's test as the secondary statistical analysis. Statistically significant difference exists between the upper-airway dimensions in both the skeletal malocclusions with hyperdivergent growth patterns when compared to other growth patterns. In both the skeletal malocclusions, vertical growers showed a significant decrease in the airway size than the horizontal and normal growers. There is no statistical significance between the lower airway and craniofacial growth pattern.

Findings regarding the relationships between sociodemographic, psychological, comorbidity factors, and functional status, in geriatric inpatients.

PubMed

Capisizu, Ana; Aurelian, Sorina; Zamfirescu, Andreea; Omer, Ioana; Haras, Monica; Ciobotaru, Camelia; Onose, Liliana; Spircu, Tiberiu; Onose, Gelu

2015-01-01

To assess the impact of socio-demographic and comorbidity factors, and quantified depressive symptoms on disability in inpatients. Observational cross-sectional study, including a number of 80 elderly (16 men, 64 women; mean age 72.48 years; standard deviation 9.95 years) admitted in the Geriatrics Clinic of "St. Luca" Hospital, Bucharest, between May-July, 2012. We used the Functional Independence Measure, Geriatric Depression Scale and an array of socio-demographic and poly-pathology parameters. Statistical analysis included Wilcoxon and Kruskal-Wallis tests for ordinal variables, linear bivariate correlations, general linear model analysis, ANOVA. FIM scores were negatively correlated with age (R=-0.301; 95%CI=-0.439 -0.163; p=0.007); GDS scores had a statistically significant negative correlation (R=-0.322; 95% CI=-0.324 -0.052; p=0.004) with FIM scores. A general linear model, including other variables (gender, age, provenance, matrimonial state, living conditions, education, respectively number of chronic illnesses) as factors, found living conditions (p=0.027) and the combination of matrimonial state and gender (p=0.004) to significantly influence FIM scores. ANOVA showed significant differences in FIM scores stratified by the number of chronic diseases (p=0.035). Our study objectified the negative impact of depression on functional status; interestingly, education had no influence on FIM scores; living conditions and a combination of matrimonial state and gender had an important impact: patients with living spouses showed better functional scores than divorced/widowers; the number of chronic diseases also affected the FIM scores: lower in patients with significant polypathology. These findings should be considered when designing geriatric rehabilitation programs, especially for home--including skilled--cares.

Self Esteem and Organizational Commitment Among Health Information Management Staff in Tertiary Care Hospitals in Tehran

PubMed Central

Sadoughi, Farahnaz; Ebrahimi, Kamal

2015-01-01

Background: Self esteem (SE) and organizational commitment (OC) have significant impact on the quality of work life. Aim: This study aims to gain a better understanding of the relationships between SE and OC among health information management staff in tertiary care hospitals in Tehran (Iran). Methods: This was a descriptive correlational and cross sectional study conducted on the health information management staff of tertiary care hospitals in Tehran, Iran. A total of 155 participants were randomly selected from 400 staff. Data were collected by two standard questionnaires. The SE and OC was measured using Eysenck SE scale and Meyer and Allen’s three component model, respectively. The collected data were analyzed with the SPSS (version 16) using statistical tests of of independent T-test, Pearson Correlation coefficient, one way ANOVA and F tests. Results: The OC and SE of the employees’ were 67.8, out of 120 (weak and 21.0 out of 30 (moderate), respectively. The values for affective commitment, normative commitment, and continuance commitment were respectively 21.3 out of 40 (moderate), 23.9 out of 40 (moderate), and 22.7 out of 40 (moderate). The Pearson correlation coefficient test showed a significant OC and SE was statistically significant (P<0.05). The one way ANOVA test (P<0.05) did not show any significant difference between educational degree and work experience with SE and OC. Conclusion: This research showed that SE and OC are moderate. SE and OC have strong correlation with turnover, critical thinking, job satisfaction, and individual and organizational improvement. Therefore, applying appropriate human resource policies is crucial to reinforce these measures. PMID:25716374

Drooling, saliva production, and swallowing in cerebral palsy.

PubMed

Senner, Jill E; Logemann, Jerilyn; Zecker, Steven; Gaebler-Spira, Deborah

2004-12-01

Fourteen participants (six females, eight males) ranging in age from 7 years 11 months to 18 years 2 months (mean 11y 7mo) with a confirmed diagnosis of spastic cerebral palsy (CP) were included in the study. Participants included those who drooled (CP+, n=14); age- and sex-matched children with spastic CP who were dry to mild and never to infrequent droolers (CP-, n=14) as well as typically developing peers (CTRL, n=14) served as controls. Frequency of swallowing was measured by using simultaneous cervical ausculation and videotaping of the head and neck. Saliva production was measured with the Saxon test, a simple gauze-chewing procedure. In addition, Pediatric Evaluation of Disability Inventory (PEDI), Test of Nonverbal Intelligence-3 (TONI-3), dysarthria severity scale, and Gross Motor Function Classification System (GMFCS) scores were obtained for each participant. Both groups of participants with CP tended to swallow less frequently than typically developing participants and tended to produce less saliva than typically developing controls; however, these differences were not statistically significant. No correlation was found between amount of saliva produced and amount drooled (r=0.245). An analysis of variance (ANOVA) conducted on the PEDI functional skills mean scores indicated significant differences between the three groups (F(2,39)=23.522,p<0.0001). Likewise, an ANOVA conducted on the TONI-3 scores revealed statistically significant differences between the three groups (F(2,39)=31.761, p<0.0001). A Spearman's rho correlation indicated that GMFCS scores were not significantly correlated with drooling severity (Spearman's rho correlation=0.3951,p=0.037). Drooling severity was found to be positively correlated with dysarthria severity (Spearman's rho correlation=0.82,p<0.0001). These findings suggest that drooling in patients with CP is related to swallowing difficulties rather than hypersalivation.

Leptin to adiponectin ratio in preeclampsia.

PubMed

Khosrowbeygi, A; Ahmadvand, H

2013-04-01

The aim of the present study was to assess leptin/adiponectin ratio in preeclamptic patients compared with normal pregnant women. A cross-sectional study was designed. The study population consisted of 30 preeclamptic patients and 30 healthy pregnant women. Serum levels of total leptin and adiponectin were assessed using commercially available enzyme-linked immunosorbent assay methods. The one-way ANOVA and Student's t tests and Pearson's correlation analysis were used for statistical calculations. Levels of leptin and adiponectin were also adjusted for BMI. A p-value < 0.05 was considered statistically significant. The leptin/adiponectin ratio was increased significantly in preeclamptic patients. The leptin/adiponectin ratio was significantly higher in severe preeclamptic patient than in mild preeclampsia. Adjusted leptin/adiponectin ratio was also significantly increased in preeclamptic patients than in normal pregnant women. The findings of the present study suggest that the leptin/adiponectin ratio was increased in preeclamsia and imbalance between the adipocytokines could be involved in the pathogenesis of preeclampsia.

The platelet activating factor acetyl hydrolase, oxidized low-density lipoprotein, paraoxonase 1 and arylesterase levels in treated and untreated patients with polycystic ovary syndrome.

PubMed

Carlioglu, Ayse; Kaygusuz, Ikbal; Karakurt, Feridun; Gumus, Ilknur Inegol; Uysal, Aysel; Kasapoglu, Benan; Armutcu, Ferah; Uysal, Sema; Keskin, Esra Aktepe; Koca, Cemile

2014-11-01

To evaluate the platelet activating factor acetyl hydrolyze (PAF-AH), oxidized low-density lipoprotein (ox-LDL), paraoxonase 1 (PON1), arylesterase (ARE) levels and the effects of metformin and Diane-35 (ethinyl oestradiol + cyproterone acetate) therapies on these parameters and to determine the PON1 polymorphisms among PCOS patients. Ninety patients with PCOS, age 30, and body mass index-matched healthy controls were included in the study. Patients were divided into three groups: metformin treatment, Diane-35 treatment and no medication groups. The treatment with metformin or Diane-35 was continued for 6 months and all subjects were evaluated with clinical and biochemical parameters 6 months later. One-way Anova test, t test and non-parametric Mann-Whitney U tests were used for statistical analysis. PAF-AH and ox-LDL levels were statistically significantly higher in untreated PCOS patients than controls, and they were statistically significantly lower in patients treated with metformin or Diane-35 than untreated PCOS patients. In contrast, there were lower PON1 (not statistically significant) and ARE (statistically significant) levels in untreated PCOS patients than the control group and they significantly increased after metformin and Diane-35 treatments. In PCOS patients serum PON1 levels for QQ, QR and RR phenotypes were statistically significantly lower than the control group. In patients with PCOS, proatherogenic markers increase. The treatment of PCOS with metformin or Diane-35 had positive effects on lipid profile, increased PON1 level, which is a protector from atherosclerosis and decreased the proatherogenic PAF-AH and ox-LDL levels.

The impact of environmental and demographic factors on nursing job satisfaction.

PubMed

Rahnavard, Farnaz; Sadati, Ahmad Kalateh; Hemmati, Sorror; Ebrahimzade, Najmeh; Sarikhani, Yaser; Heydari, Seyed Taghi; Lankarani, Kamran Bagheri

2018-04-01

This study aims to evaluate all aspects of job satisfaction in registered nurses working in different hospitals in Shiraz, Iran. This cross-sectional study was performed during February to August 2015 in Shiraz, Iran. It comprised of 371 registered nurses working in government and private hospitals using multi-stage cluster sampling. Job satisfaction was evaluated using 5 items of the Job Descriptive Index (JDI) consisting of 63 questions developed by Smith, Kendall, and Hulin (1969). Statistical tests including independent sample t test and one-way analysis of variance (ANOVA) were used in order to identify the relation between job satisfaction, and demographic features and work environment. Data were analyzed by SPSS version 15.0, using descriptive statistics, independent-samples t-test, and ANOVA. Our findings showed no relationship between demographic variables and job satisfaction. However, a significant association was observed between environmental aspects such as work rotation (fixed versus rotating) nurse's status (staff vs. supervisors), type of hospitals (governmental vs. private) and work (p<0.01), promotion (p<0.02) and pay (p<0.01) items respectively; however, type of hospital was deemed exempt regarding promotion. Also regarding the number of shifts per week, nurses with more than eight shifts present a lower mean score of satisfaction about pay significantly (p=0.03). The results concerning younger nurses have different types of satisfaction based on several environmental factors. Nurses' policy makers must pay more attention to nurses' satisfaction and focus on reducing the various inequalities.

A Comparison of Face to Face and Video-Based Self Care Education on Quality of Life of Hemodialysis Patients

PubMed Central

Hemmati Maslakpak, Masumeh; Shams, Shadi

2015-01-01

Background End stage renal disease negatively affects the patients’ quality of life. There are different educational methods to help these patients. This study was performed to compare the effectiveness of self-care education in two methods, face to face and video educational, on the quality of life in patients under treatment by hemodialysis in education-medical centers in Urmia. Methods In this quasi-experimental study, 120 hemodialysis patients were selected randomly; they were then randomly allocated to three groups: the control, face to face education and video education. For face to face group, education was given individually in two sessions of 35 to 45 minutes. For video educational group, CD was shown. Kidney Disease Quality Of Life- Short Form (KDQOL-SF) questionnaire was filled out before and two months after the intervention. Data analysis was performed in SPSS software by using one-way ANOVA. Results ANOVA test showed a statistically significant difference in the quality of life scores among the three groups after the intervention (P=0.024). After the intervention, Tukey’s post-hoc test showed a statistically significant difference between the two groups of video and face to face education regarding the quality of life (P>0.05). Conclusion Implementation of the face to face and video education methods improves the quality of life in hemodialysis patients. So, it is suggested that video educational should be used along with face to face education. PMID:26171412

An In Vitro Comparison of the Marginal Adaptation Accuracy of CAD/CAM Restorations Using Different Impression Systems.

PubMed

Shembesh, Marwa; Ali, Ala; Finkelman, Matthew; Weber, Hans-Peter; Zandparsa, Roya

2017-10-01

To compare the marginal adaptation of 3-unit zirconia fixed dental prostheses (FDPs) obtained from intraoral digital scanners (Lava True Definition, Cadent iTero), scanning of a conventional silicone impression, and the resulting master cast with an extraoral scanner (3Shape lab scanner). One reference model was fabricated from intact, non-carious, unrestored human mandibular left first premolar and first molar teeth (teeth #19 and 21), prepared for a three-unit all-ceramic FDP. Impressions of the reference model were obtained using four impression systems (n = 10), group 1 (PVS impression scan), group 2 (stone cast scan), group 3 (Cadent iTero), and group 4 (Lava True Defintion). Then the three-unit zirconia FDPs were milled. Marginal adaptation of the zirconia FDPs was evaluated using an optical comparator at four points on each abutment. The mean (SD) was reported for each group. One-way ANOVA was used to assess the statistical significance of the results, with post hoc tests conducted via Tukey's HSD. p < 0.05 was considered statistically significant. All analyses were done using SPSS 22.0. The mean (SD) marginal gaps for the recorded data from highest to lowest were silicone impression scans 81.4 μm (6.8), Cadent iTero scan 62.4 μm (5.0), master cast scan 50.2 μm (6.1), and Lava True definition scan 26.6 μm (4.7). One-way ANOVA revealed significant differences (p < 0.001) in the mean marginal gap among the groups. The Tukey's HSD tests demonstrated that the differences between all groups (silicone impression scan, master cast scan, Lava True definition scan, iTero Cadent scan) were statistically significant (all p < 0.001). On the basis of the criterion of 120 μm as the limit of clinical acceptance, all marginal discrepancy values of all groups were clinically acceptable. Within the confines of this in vitro study, it can be concluded that the marginal gap of all impression techniques was within the acceptable clinical limit (120 μm). Group 4 (Lava True Defintion) showed the lowest average gap among all groups followed by group 2 (stone cast scan), group 3 (Cadent iTero), and group 1 (PVS impression scan); these differences were statistically significant. © 2016 by the American College of Prosthodontists.

Behavioral phenotype in adults with Prader-Willi syndrome.

PubMed

Sinnema, Margje; Einfeld, Stewart L; Schrander-Stumpel, Constance T R M; Maaskant, Marian A; Boer, Harm; Curfs, Leopold M G

2011-01-01

Prader-Willi syndrome (PWS) is characterized by temper tantrums, impulsivity, mood fluctuations, difficulty with change in routine, skinpicking, stubbornness and aggression. Many studies on behavior in PWS are limited by sample size, age range, a lack of genetically confirmed diagnosis of PWS and inconsistent assessment of behavior. The aim of this study was to explore systematically the relation between behavioral problems and age groups, genetic subtypes and BMI categories in an adult PWS population. Participants were contacted via the Dutch Prader-Willi Parent Association and through physicians specialized in persons with ID. Behaviors were studied using the Developmental Behavior Checklist for Adults (DBC-A). The forms were completed by the main caregivers of 98 adults with a genetically confirmed diagnosis of PWS. Differences between age groups were statistically significant (ANOVA, p=0.03). DBC-A total scores were higher in the consecutive age groups, with the most behavioral problems in the oldest age groups. Differences between genetic subtypes were also statistically significant (ANOVA, p<0.01). Persons with mUPD had higher total scores on the DBC-A than persons with a deletion. Those with a Type I deletion showed higher total DBC-A scores than persons with a Type II deletion. There were no statistically significant differences in DBC-A total scores between the different BMI categories. Individuals with a BMI<25 had higher scores on the self-absorbed subscale compared to persons with a BMI between 25 and 30. Unlike previous descriptions of the behavioral phenotype in adults with PWS, we did not find a reduction in behavioral problems in older adults. Therefore, special attention should be paid to behavioral problems as part of general management of adults with PWS. Longitudinal studies are warranted to gain more insight into the natural history and course of behavioral problems in adults and older people with PWS over the long term and possible risk and preventive factors. Copyright © 2010 Elsevier Ltd. All rights reserved.

Factors influencing medical informatics examination grade--can biorhythm, astrological sign, seasonal aspect, or bad statistics predict outcome?

PubMed

Petrovecki, Mladen; Rahelić, Dario; Bilić-Zulle, Lidija; Jelec, Vjekoslav

2003-02-01

To investigate whether and to what extent various parameters, such as individual characteristics, computer habits, situational factors, and pseudoscientific variables, influence Medical Informatics examination grade, and how inadequate statistical analysis can lead to wrong conclusions. The study included a total of 382 second-year undergraduate students at the Rijeka University School of Medicine in the period from 1996/97 to 2000/01 academic year. After passing the Medical Informatics exam, students filled out an anonymous questionnaire about their attitude toward learning medical informatics. They were asked to grade the course organization and curriculum content, and provide their date of birth; sex; study year; high school grades; Medical Informatics examination grade, type, and term; and describe their computer habits. From these data, we determined their zodiac signs and biorhythm. Data were compared by the use of t-test, one-way ANOVA with Tukey's honest significance difference test, and randomized complete block design ANOVA. Out of 21 variables analyzed, only 10 correlated with the average grade. Students taking Medical Informatics examination in the 1998/99 academic year earned lower average grade than any other generation. Significantly higher Medical Informatics exam grade was earned by students who finished a grammar high school; owned and regularly used a computer, Internet, and e-mail (p< or =0.002 for all items); passed an oral exam without taking a written test (p=0.004), or did not repeat the exam (p<0.001). Better high-school students and students with better grades from high-school informatics course also scored significantly better (p=0.032 and p<0.001, respectively). Grade in high-school mathematics, student's sex, and time of year when the examination was taken were not related to the grade, and neither were pseudoscientific parameters, such as student zodiac sign, zodiac sign quality, or biorhythm cycles, except when intentionally inadequate statistics was used for data analysis. Medical Informatics examination grades correlated with general learning capacity and computer habits of students, but showed no relation to other investigated parameters, such as examination term or pseudoscientific parameters. Inadequate statistical analysis can always confirm false conclusions.

An investigative comparison of purging and non-purging groundwater sampling methods in Karoo aquifer monitoring wells

NASA Astrophysics Data System (ADS)

Gomo, M.; Vermeulen, D.

2015-03-01

An investigation was conducted to statistically compare the influence of non-purging and purging groundwater sampling methods on analysed inorganic chemistry parameters and calculated saturation indices. Groundwater samples were collected from 15 monitoring wells drilled in Karoo aquifers before and after purging for the comparative study. For the non-purging method, samples were collected from groundwater flow zones located in the wells using electrical conductivity (EC) profiling. The two data sets of non-purged and purged groundwater samples were analysed for inorganic chemistry parameters at the Institute of Groundwater Studies (IGS) laboratory of the Free University in South Africa. Saturation indices for mineral phases that were found in the data base of PHREEQC hydrogeochemical model were calculated for each data set. Four one-way ANOVA tests were conducted using Microsoft excel 2007 to investigate if there is any statistically significant difference between: (1) all inorganic chemistry parameters measured in the non-purged and purged groundwater samples per each specific well, (2) all mineral saturation indices calculated for the non-purged and purged groundwater samples per each specific well, (3) individual inorganic chemistry parameters measured in the non-purged and purged groundwater samples across all wells and (4) Individual mineral saturation indices calculated for non-purged and purged groundwater samples across all wells. For all the ANOVA tests conducted, the calculated alpha values (p) are greater than 0.05 (significance level) and test statistic (F) is less than the critical value (Fcrit) (F < Fcrit). The results imply that there was no statistically significant difference between the two data sets. With a 95% confidence, it was therefore concluded that the variance between groups was rather due to random chance and not to the influence of the sampling methods (tested factor). It is therefore be possible that in some hydrogeologic conditions, non-purged groundwater samples might be just as representative as the purged ones. The findings of this study can provide an important platform for future evidence oriented research investigations to establish the necessity of purging prior to groundwater sampling in different aquifer systems.

Surface roughness of glass ionomer cements indicated for uncooperative patients according to surface protection treatment

PubMed Central

Pacifici, Edoardo; Bossù, Maurizio; Giovannetti, Agostino; La Torre, Giuseppe; Guerra, Fabrizio; Polimeni, Antonella

2013-01-01

Summary Background Even today, use of Glass Ionomer Cements (GIC) as restorative material is indicated for uncooperative patients. Aim The study aimed at estimating the surface roughness of different GICs using or not their proprietary surface coatings and at observing the interfaces between cement and coating through SEM. Materials and methods Forty specimens have been obtained and divided into 4 groups: Fuji IX (IX), Fuji IX/G-Coat Plus (IXC), Vitremer (V), Vitremer/Finishing Gloss (VFG). Samples were obtained using silicone moulds to simulate class I restorations. All specimens were processed for profilometric evaluation. The statistical differences of surface roughness between groups were assessed using One-Way Analysis of Variance (One-Way ANOVA) (p<0.05). The Two-Way Analysis of Variance (Two-Way ANOVA) was used to evaluate the influence of two factors: restoration material and presence of coating. Coated restoration specimens (IXC and VFG) were sectioned perpendicular to the restoration surface and processed for SEM evaluation. Results No statistical differences in roughness could be noticed between groups or factors. Following microscopic observation, interfaces between restoration material and coating were better for group IXC than for group VFG. Conclusions When specimens are obtained simulating normal clinical procedures, the presence of surface protection does not significantly improve the surface roughness of GICs. PMID:24611090

Surface roughness of glass ionomer cements indicated for uncooperative patients according to surface protection treatment.

PubMed

Pacifici, Edoardo; Bossù, Maurizio; Giovannetti, Agostino; La Torre, Giuseppe; Guerra, Fabrizio; Polimeni, Antonella

2013-01-01

Even today, use of Glass Ionomer Cements (GIC) as restorative material is indicated for uncooperative patients. The study aimed at estimating the surface roughness of different GICs using or not their proprietary surface coatings and at observing the interfaces between cement and coating through SEM. Forty specimens have been obtained and divided into 4 groups: Fuji IX (IX), Fuji IX/G-Coat Plus (IXC), Vitremer (V), Vitremer/Finishing Gloss (VFG). Samples were obtained using silicone moulds to simulate class I restorations. All specimens were processed for profilometric evaluation. The statistical differences of surface roughness between groups were assessed using One-Way Analysis of Variance (One-Way ANOVA) (p<0.05). The Two-Way Analysis of Variance (Two-Way ANOVA) was used to evaluate the influence of two factors: restoration material and presence of coating. Coated restoration specimens (IXC and VFG) were sectioned perpendicular to the restoration surface and processed for SEM evaluation. No statistical differences in roughness could be noticed between groups or factors. Following microscopic observation, interfaces between restoration material and coating were better for group IXC than for group VFG. When specimens are obtained simulating normal clinical procedures, the presence of surface protection does not significantly improve the surface roughness of GICs.

Effect of Dentin Wetness on the Bond Strength of Universal Adhesives.

PubMed

Choi, An-Na; Lee, Ji-Hye; Son, Sung-Ae; Jung, Kyoung-Hwa; Kwon, Yong Hoon; Park, Jeong-Kil

2017-10-25

The effects of dentin wetness on the bond strength and adhesive interface morphology of universal adhesives have been investigated using micro-tensile bond strength (μTBS) testing and confocal laser scanning microscopy (CLSM). Seventy-two human third molars were wet ground to expose flat dentin surfaces. They were divided into three groups according to the air-drying time of the dentin surfaces: 0 (without air drying), 5, and 10 s. The dentin surfaces were then treated with three universal adhesives: G-Premio Bond, Single Bond Universal, and All-Bond Universal in self-etch or etch-and-rinse mode. After composite build up, a μTBS test was performed. One additional tooth was prepared for each group by staining the adhesives with 0.01 wt % of Rhodamine B fluorescent dye for CLSM analysis. The data were analyzed statistically using ANOVA and Tukey's post hoc tests (α = 0.05). Two-way ANOVA showed significant differences among the adhesive systems and dentin moisture conditions. An interaction effect was also observed ( p < 0.05). One-way ANOVA showed that All-Bond Universal was the only material influenced by the wetness of the dentin surfaces. Wetness of the dentin surface is a factor influencing the micro-tensile bond strength of universal adhesives.

Effect of Dentin Wetness on the Bond Strength of Universal Adhesives

PubMed Central

Lee, Ji-Hye; Son, Sung-Ae; Jung, Kyoung-Hwa; Kwon, Yong Hoon

2017-01-01

The effects of dentin wetness on the bond strength and adhesive interface morphology of universal adhesives have been investigated using micro-tensile bond strength (μTBS) testing and confocal laser scanning microscopy (CLSM). Seventy-two human third molars were wet ground to expose flat dentin surfaces. They were divided into three groups according to the air-drying time of the dentin surfaces: 0 (without air drying), 5, and 10 s. The dentin surfaces were then treated with three universal adhesives: G-Premio Bond, Single Bond Universal, and All-Bond Universal in self-etch or etch-and-rinse mode. After composite build up, a μTBS test was performed. One additional tooth was prepared for each group by staining the adhesives with 0.01 wt % of Rhodamine B fluorescent dye for CLSM analysis. The data were analyzed statistically using ANOVA and Tukey’s post hoc tests (α = 0.05). Two-way ANOVA showed significant differences among the adhesive systems and dentin moisture conditions. An interaction effect was also observed (p < 0.05). One-way ANOVA showed that All-Bond Universal was the only material influenced by the wetness of the dentin surfaces. Wetness of the dentin surface is a factor influencing the micro-tensile bond strength of universal adhesives. PMID:29068404

Influence of Glide Path Preparation on the Canal Shaping Times of WaveOne Gold in Curved Mandibular Molar Canals.

PubMed

Vorster, Martin; van der Vyver, Peet J; Paleker, Farzana

2018-05-01

The aim of this study was to compare the glide path preparation times of stainless steel hand files, PathFiles (Dentsply Sirona, Ballaigues, Switzerland), and the WaveOne Gold Glider (Dentsply Sirona). The preparation times for final root canal shaping with the Primary WaveOne Gold instrument in extracted human molar teeth with and without prior glide path preparation were also recorded and compared. Mesiobuccal canals of 60 extracted human mandibular molars (curvature angles between 25° and 35° and radii <10 mm) were selected and randomly divided into 4 groups with 15 canals each. Canals were negotiated to patency with a #8 K-file. Canal preparations were performed by a single operator using precurved #10-15-20 stainless steel manual K-files (the K-file group), a #10 stainless steel manual K-file followed by PathFiles #1-3 (the PathFile group), a #10 stainless steel manual K-file followed by WaveOne Gold Glider (the WaveOne Gold Glider group), or no further glide path preparation. Final canal preparation of all 60 canals was performed with the Primary WaveOne Gold instrument. Glide path and final preparation times were recorded. Glide path enlargement was statistically significantly fastest in the WaveOne Gold Glider group (19.7 ± 5.6 seconds) followed by the PathFile group (41.0 ± 6.8 seconds) and then the K-file group (81.2 ± 26.3 seconds) using analysis of variance (ANOVA) and Kruskal-Wallis tests (P < .0001). No statistically significant difference in the mean final preparation times was found among the WaveOne Gold Glider (23.1 ± 6.0 seconds), PathFile (24.4 ± 4.9 seconds), and K-file groups (27.2 ± 9.5 seconds). All 3 groups were statistically significantly faster than the no glide path preparation group (35.4 ± 10.2 seconds) using ANOVA (P = .0004) and Kruskal-Wallis tests (P = .0010). Preparation time with the Primary WaveOne Gold file was statistically significantly reduced when the file was used in combination with any of the glide path preparation techniques. The WaveOne Gold Glider performed statistically significantly faster in glide path preparation time than the other glide path preparation techniques. Copyright © 2018 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The slip resistance of common footwear materials measured with two slipmeters.

PubMed

Chang, W R; Matz, S

2001-12-01

The slip resistance of 16 commonly used footwear materials was measured with the Brungraber Mark II and the English XL on 3 floor surfaces under surface conditions of dry, wet, oily and oily wet. Three samples were used for each material combination and surface condition. The results of a one way ANOVA analysis indicated that the differences among different samples were statistically significant for a large number of material combinations and surface conditions. The results indicated that the ranking of materials based on their slip resistance values depends highly on the slipmeters, floor surfaces and surface conditions. For contaminated surfaces including wet, oily and oily wet surfaces, the slip resistance obtained with the English XL was usually higher than that measured with the Brungraber Mark II. The correlation coefficients between the slip resistance obtained with these two slipmeters calculated for different surface conditions indicated a strong correlation with statistical significance.

Trend-surface analysis of morphometric parameters: A case study in southeastern Brazil

NASA Astrophysics Data System (ADS)

Grohmann, Carlos Henrique

2005-10-01

Trend-surface analysis was carried out on data from morphometric parameters isobase and hydraulic gradient. The study area, located in the eastern border of Quadrilátero Ferrífero, southeastern Brazil, presents four main geomorphological units, one characterized by fluvial dissection, two of mountainous relief, with a scarp of hundreds of meters of fall between them, and a flat plateau in the central portion of the fluvially dissected terrains. Morphometric maps were evaluated in GRASS-GIS and statistics were made on R statistical language, using the spatial package. Analysis of variance (ANOVA) was made to test the significance of each surface and the significance of increasing polynomial degree. The best results were achieved with sixth-order surface for isobase and second-order surface for hydraulic gradient. Shape and orientation of residual maps contours for selected trends were compared with structures inferred from several morphometric maps, and a good correlation is present.

Practical statistics in pain research.

PubMed

Kim, Tae Kyun

2017-10-01

Pain is subjective, while statistics related to pain research are objective. This review was written to help researchers involved in pain research make statistical decisions. The main issues are related with the level of scales that are often used in pain research, the choice of statistical methods between parametric or nonparametric statistics, and problems which arise from repeated measurements. In the field of pain research, parametric statistics used to be applied in an erroneous way. This is closely related with the scales of data and repeated measurements. The level of scales includes nominal, ordinal, interval, and ratio scales. The level of scales affects the choice of statistics between parametric or non-parametric methods. In the field of pain research, the most frequently used pain assessment scale is the ordinal scale, which would include the visual analogue scale (VAS). There used to be another view, however, which considered the VAS to be an interval or ratio scale, so that the usage of parametric statistics would be accepted practically in some cases. Repeated measurements of the same subjects always complicates statistics. It means that measurements inevitably have correlations between each other, and would preclude the application of one-way ANOVA in which independence between the measurements is necessary. Repeated measures of ANOVA (RMANOVA), however, would permit the comparison between the correlated measurements as long as the condition of sphericity assumption is satisfied. Conclusively, parametric statistical methods should be used only when the assumptions of parametric statistics, such as normality and sphericity, are established.

Fracture strength of lithium disilicate crowns compared to polymer-infiltrated ceramic-network and zirconia reinforced lithium silicate crowns.

PubMed

Sieper, Kim; Wille, Sebastian; Kern, Matthias

2017-10-01

The aim of this study was to evaluate the fracture strength of crowns made from current CAD/CAM materials. In addition the influence of crown thickness and chewing simulation on the fracture strength was evaluated. Crowns were fabricated from lithium disilicate, zirconia reinforced lithium silicate (ZLS-ceramic) and a polymer-infiltrated ceramic-network (PICN) with an occlusal thickness of 1.0mm or 1.5mm, respectively (n=16). Crowns were cemented on composite dies. Subgroups of eight specimens were loaded with 5kg in a chewing simulator for 1,200,000 cycles with thermal cycling. Finally, all specimens were loaded until fracture in a universal testing machine. Three-way ANOVA was used to detect statistical interaction. Differences regarding the materials were tested with two-way ANOVA, following one-way ANOVA and a post-hoc Tukey's-Test. All crowns survived the chewing simulation. The material had a significant influence on the fracture resistance (p≤0.05). Lithium disilicate achieved the highest values of fracture strength in almost all groups followed by ZLS-ceramic. PICN achieved the lowest values of fracture strength. Chewing simulation increased the fracture strength of thick lithium disilicate crown significantly. Greater occlusal thickness of all crown materials resulted in higher crown fracture strength before chewing simulation. After chewing simulation occlusal thickness of lithium disilicate and PICN crowns had no significant influence on the fracture strength. All crowns revealed fracture strength above the clinically expected loading forces. Therefore the durability of the tested CAD/CAM materials seems promising also in an occlusal thickness of 1.0mm. Copyright © 2017 Elsevier Ltd. All rights reserved.

Workload Assessment for the Combat Vehicle Command and Control Company- Level Evaluation

DTIC Science & Technology

1992-04-01

and descriptive statistics are in Appendix F3 . Shell and SITREP Reports. No significant total score workload differences were obtained for these tasks...Cases= 9: missing Cases = 15 OR 16.5 PCT. F2-20 Appendix F3 Prepare/Send CFF Report Variable or term GRP(l) ANOVA factor comparing CVCC with Ml Baseline...subscale score for task CMT4WL5 Effort subscale score for task CMT4WL6 Frustration subscale score for task F3 -1 Deviation Scores: Task 4 - Prepare/Send CFF

Quantitation of flavonoid constituents in citrus fruits.

PubMed

Kawaii, S; Tomono, Y; Katase, E; Ogawa, K; Yano, M

1999-09-01

Twenty-four flavonoids have been determined in 66 Citrus species and near-citrus relatives, grown in the same field and year, by means of reversed phase high-performance liquid chromatography analysis. Statistical methods have been applied to find relations among the species. The F ratios of 21 flavonoids obtained by applying ANOVA analysis are significant, indicating that a classification of the species using these variables is reasonable to pursue. Principal component analysis revealed that the distributions of Citrus species belonging to different classes were largely in accordance with Tanaka's classification system.

Steroid-induced osteoporosis monitored by Raman spectroscopy

NASA Astrophysics Data System (ADS)

Maher, Jason R.; Takahata, Masahiko; Awad, Hani A.; Berger, Andrew J.

2011-03-01

Glucocorticoids are frequently used to treat inflammatory disorders such as rheumatoid arthritis. Unfortunately, extended exposure to this steroid is the leading cause of physician-induced osteoporosis, leaving patients susceptible to fractures at rates of 30-50%. In this presentation, we report correlations between Raman spectra and biomechanical strength tests on bones of glucocorticoid- and placebo- treated mice. Both wild-type mice and a transgenic model of rheumatoid arthritis have been studied. A two-way ANOVA model reveals statistically significant spectral differences as influenced by glucocorticoid treatment and mouse type.

Content and Method in the Teaching of Marketing Research Revisited

ERIC Educational Resources Information Center

Wilson, Holt; Neeley, Concha; Niedzwiecki, Kelly

2009-01-01

This paper presents the findings from a survey of marketing research faculty. The study finds SPSS is the most used statistical software, that cross tabulation, single, independent, and dependent t-tests, and ANOVA are among the most important statistical tools according to respondents. Bivariate and multiple regression are also considered…

Effect of filler type and polishing on the discoloration of composite resin artificial teeth.

PubMed

Imamura, Soichiro; Takahashi, Hidekazu; Hayakawa, Iwao; Loyaga-Rendon, Paola G; Minakuchi, Shunsuke

2008-11-01

In this study, the effects of filler type and polishing on the discoloration of composite resin artificial teeth were examined. Four types of experimental resins were prepared: one was a matrix resin, while the others were composite resins containing three different types of fillers (nano-sized silica filler with or without silanization, and prepolymerized filler). Specimens were immersed in distilled water, coffee, red wine, or curry. Color change after immersion was measured using a colorimeter. Color difference values (delta E) and changes in translucency parameter (delta TP) were statistically analyzed using three-way ANOVA and Tukey's comparison. On the influence of the polishing factor, statistically significant differences were neither observed in delta E nor delta TP between polished and non-polished tooth surfaces. On the contrary, the influences of filler type and discoloration medium, and their interaction thereof, were significant. With unsilanized filler, the delta E value of composite resin artificial teeth was significantly increased.

Effect of trapidil in myocardial ischemia-reperfusion injury in rabbit.

PubMed

Liu, Mingjie; Sun, Qi; Wang, Qiang; Wang, Xiuying; Lin, Peng; Yang, Ming; Yan, Yuanyuan

2014-01-01

To evaluate the cardioprotective effects of trapidil on myocardial ischemia-reperfusion injury (MIRI) in rabbits. Rabbits were subjected to 40 min of myocardial ischemia followed by 120 min of reperfusion. Blood for superoxide dismutase (SOD) and malondialdehyde (MDA) were estimated. At the end of reperfusion, the rabbits were sacrificed and the hearts were isolated for histological examination. An apoptotic index (AI) was determined using the terminal deoxynucleotidyl transferase (TdT)-mediated dUTP nick-end-labeling (TUNEL) method. The expression of apoptosis-related proteins Bax and Bcl-2 was analyzed using immunohistochemistry. Statistical analyses were performed by one-way analysis of variance (ANOVA), P < 0.05 considered statistically significant. Trapidil caused a significant (P < 0.05) increase in SOD activity, as decreased MDA levels and significantly (P < 0.05) reduced the expression of Bax as compared with the ischemia-reperfusion (IR) control group. Trapidil may attenuate the myocardial damage produced by IR injury and offer potential cardioprotective action.

Influence of artificial accelerated ageing on the colour stability of paints used for ocular prosthesis iris painting.

PubMed

Mundim, Fabrício M; Antunes, Pedro L; Sousa, Ana Beatriz S; Garcia, Lucas F R; Pires-de-Souza, Fernanda C P

2012-06-01

To evaluate the colour stability of paints used for ocular prosthesis iris painting submitted for accelerated artificial ageing (AAA). Forty specimens of acrylic resin for sclera (16 × 2 mm) were made and separated into eight groups (n = 10) according to the type of paint (gouache, GP; oil, OP; acrylic AP; and composite resin for characterisation, CR) and the colours used (blue/brown). After drying (72 h), a new layer of colourless acrylic resin was applied and the initial colour readout was performed (Spectrophotometer PCB 6807). New colour readouts were performed after AAA, and ΔE was calculated. Statistical analysis (two-way anova-Bonferroni, p < 0.05) demonstrated that the brown colour showed lower ΔE means in comparison with the blue colour, with statistically significant difference for AP only. Blue colour showed no statistically significant difference with regard to the type of paint used. Brown AP showed lower ΔE than the other groups, with significant difference for OP and GP. GP showed greater alteration in ΔE for the brown colour, being statistically similar only to OP. Only the AP group for brown pigment shows clinically acceptable values for colour stability after AAA. © 2011 The Gerodontology Society and John Wiley & Sons A/S.

The effect of prolonged storage and disinfection on the dimensional stability of 5 vinyl polyether silicone impression materials

PubMed Central

Flores-Mir, Carlos; Heo, Giseon; Torrealba, Ysidora

2017-01-01

PURPOSE Vinyl polyether silicone (VPES) has a different composition from other elastomeric impression materials as it combines vinyl polysiloxane (VPS) and polyether (PE). Therefore, it is important to study its properties and behavior under different test conditions. This study investigated the dimensional stability of 5 VPES consistencies when stored for up to 2 weeks, with and without using a standard disinfection procedure. MATERIALS AND METHODS 40 discs of each VPES consistency (total 200) were made using a stainless steel die and ring as described by ANSI /ADA specification No. 19. 20 discs of each material were immersed in a 2.5% buffered glutaraldehyde solution for 30 minutes. Dimensional stability measurements were calculated immediately after fabrication and repeated on the same discs after 7 and 14 days of storage. The data was analyzed using two-way ANOVA with a significance level set at α = 0.05. RESULTS The discs mean contraction was below 0.5% at all test times ranging from 0.200 ± 0.014 to 0.325 ± 0.007. Repeated measures ANOVA showed a statistically significant difference after 2-week storage between the disinfected and non-disinfected groups (P < .001). Although there was no statistically significant difference between the materials at the time of fabrication, the contraction of the materials increased with storage for 1 and 2 weeks. CONCLUSION The dimensional changes of VPES impression discs after disinfection and prolonged storage complied with ANSI/ADA standard. The tested VPES impression materials were dimensionally stable for clinical use after disinfection for 30 minutes in glutaraldehyde and storage for up to 2 weeks. PMID:28680549

A study of the relationships between "highly qualified" status, instructional practices, and students' science achievement in three high poverty Louisiana school systems

NASA Astrophysics Data System (ADS)

Clayton, Michelle

Using a mixed methods research design, the author examined the relationships between "highly qualified" status, instructional practices, and students' science achievement for six third grade teachers in three high poverty Louisiana school systems. The study analyzed qualitative and quantitative data for three science classes taught by "highly qualified" teachers and three science classes taught by "non-highly qualified" teachers. The qualitative portion of the study was conducted through classroom observations, teacher interviews, and lesson plan reviews. The qualitative data was coded and triangulated to determine whether the instructional practices of each teacher were more "teacher-centered" or "student-centered." The qualitative data analysis indicated various patterns and consistencies in the instructional practices used by the "highly qualified" and "non-highly qualified" teachers selected for this study. The quantitative portion of the study involved analysis of the students' science achievement data for the six third grade science teachers selected for the study. Science achievement was measured by the third grade Integrated Louisiana Education Assessment Program (iLEAP) scores. A two-way ANOVA indicated that there were statistically significant differences in the mean scores of the three high poverty Louisiana school systems as well as the students taught by "highly qualified" and "non-highly qualified" teachers and the interactions between the two: F(2, 123) = 46.99, p < 0.01; F(1, 123) = 4.54, p = 0.035; F(2, 123) = 3.73, p = 0.027. A separate one-way ANOVA indicated that statistically significant differences existed between the six participating teachers in the study: F (5, 123) = 20.386, p < 0.01). Tukey's HSD post-hoc tests and homogeneous subset analyses were conducted in order to determine which teachers' scores significantly differed from each other.

Warming of infusion syringes caused by electronic syringe pumps.

PubMed

Cornelius, A; Frey, B; Neff, T A; Gerber, A C; Weiss, M

2003-05-01

To evaluate inadvertent warming of the infusion syringe in four different types of electronic syringe pumps. Ambient temperature and syringe surface temperature were simultaneously measured by two electronic temperature probes in four different models of commercially available syringe pumps. Experiments were performed at an infusion rate of 1 ml h(-1) using both battery-operated and main power-operated pumps. Measurements were repeated four times with two pumps from each of the four syringe pump types at a room temperature of approximately 23 degrees C. Differences among the four syringe pump brands regarding ambient to syringe temperature gradient were compared using ANOVA. A P-value of less than 0.05 was considered statistically significant. Syringe warming differed significantly between the four syringe brands for both the battery-operated and main power-operated mode (ANOVA, P< 0.001 for both modes). Individual differences between syringe surface and ambient temperature ranged from 0.3 to 1.9 degrees C for battery operation and from 0.5 to 11.2 degrees C during main-power operation. Infusion solutions can be significantly warmed by syringe pumps. This has potential impact on bacterial growth and the stability of drug solutions and blood products infused, as well as on the susceptibility to hydrostatic pressure changes within the infusion syringe.

New Method for Insomnia Mongolian Mind-Body Interactive Psychotherapy in the Assessment of Chronic Insomnia: A Retrospective Study.

PubMed

He, Nagongbilige; Lan, Wu; Jiang, Aruna; Jia, Haserden; Bao, Shuzhi; Bao, Longmei; Qin, Altansha; Bao, Orgel; Bao, Shinjiltu; Wang, Nandin; Bao, Suyaltu; Dai, Shuangfu; Bao, Sarula; Arlud, Sarnai

2018-06-19

Insomnia is a common clinical complaint, and if not addressed it can increase the risk of developing other underlying diseases such as hypertension, depression and anxiety. The use of Mongolian mind-body interactive therapy as a comprehensive psychotherapeutic approach in chronic insomnia has been shown in this retrospective study. Subjects who had suffered insomnia for more than 1 month participated in the Mongolian mind-body interactive psychotherapy program between June 2012 and February 2014. They were interviewed by telephone at least 10 months before participating in the program. Their sleep was assessed using the Athens insomnia scale. Descriptive statistics, ANOVA and regression analysis were used for data analysis by SPSS software. Mongolian mind-body interactive psychotherapy significantly improved sleeping conditions. In ANOVA analysis, both short- and long-term outcomes were significantly affected by the treatment period. Patients who previously took medication and pre-treatment sleeping condition (ASI score) had a significant influence on long-term outcomes, as well as treatment time related to the duration of insomnia. Mongolian mind-body interactive psychotherapy is a new method for insomnia, and narrative therapy and hypnotic methods together improve the sleeping condition, However, a further controlled randomized clinical study is needed to understand the efficacy.

Augmented effects of EMG biofeedback interfaced with virtual reality on neuromuscular control and movement coordination during reaching in children with cerebral palsy.

PubMed

Yoo, Ji Won; Lee, Dong Ryul; Cha, Young Joo; You, Sung Hyun

2017-01-01

The purpose of the present study was to compare therapeutic effects of an electromyography (EMG) biofeedback augmented by virtual reality (VR) and EMG biofeedback alone on the triceps and biceps (T:B) muscle activity imbalance and elbow joint movement coordination during a reaching motor taskOBJECTIVE: To compare therapeutic effects of an electromyography (EMG) biofeedback augmented by virtual reality (VR) and EMG biofeedback alone on the triceps and biceps muscle activity imbalance and elbow joint movement coordination during a reaching motor task in normal children and children with spastic cerebral palsy (CP). 18 children with spastic CP (2 females; mean±standard deviation = 9.5 ± 1.96 years) and 8 normal children (3 females; mean ± standard deviation = 9.75 ± 2.55 years) were recruited from a local community center. All children with CP first underwent one intensive session of EMG feedback (30 minutes), followed by one session of the EMG-VR feedback (30 minutes) after a 1-week washout period. Clinical tests included elbow extension range of motion (ROM), biceps muscle strength, and box and block test. EMG triceps and biceps (T:B) muscle activity imbalance and reaching movement acceleration coordination were concurrently determined by EMG and 3-axis accelerometer measurements respectively. Independent t-test and one-way repeated analysis of variance (ANOVA) were performed at p < 0.05. The one-way repeated ANOVA was revealed to be significantly effective in elbow extension ROM (p = 0.01), biceps muscle strength (p = 0.01), and box and block test (p = 0.03). The one-way repeated ANOVA also revealed to be significantly effective in the peak triceps muscle activity (p = 0.01). However, one-way repeated ANOVA produced no statistical significance in the composite 3-dimensional movement acceleration coordination data (p = 0.12). The present study is a first clinical trial that demonstrated the superior benefits of the EMG biofeedback when augmented by virtual reality exercise games in children with spastic CP. The augmented EMG and VR feedback produced better neuromuscular balance control in the elbow joint than the EMG biofeedback alone.

Statistic analyses of the color experience according to the age of the observer.

PubMed

Hunjet, Anica; Parac-Osterman, Durdica; Vucaj, Edita

2013-04-01

Psychological experience of color is a real state of the communication between the environment and color, and it will depend on the source of the light, angle of the view, and particular on the observer and his health condition. Hering's theory or a theory of the opponent processes supposes that cones, which are situated in the retina of the eye, are not sensible on the three chromatic domains (areas, fields, zones) (red, green and purple-blue), but they produce a signal based on the principle of the opposed pairs of colors. A reason of this theory depends on the fact that certain disorders of the color eyesight, which include blindness to certain colors, cause blindness to pairs of opponent colors. This paper presents a demonstration of the experience of blue and yellow tone according to the age of the observer. For the testing of the statistically significant differences in the omission in the color experience according to the color of the background we use following statistical tests: Mann-Whitnney U Test, Kruskal-Wallis ANOVA and Median test. It was proven that the differences are statistically significant in the elderly persons (older than 35 years).

Evaluating the efficacy of a chemistry video game

NASA Astrophysics Data System (ADS)

Shapiro, Marina

A quasi-experimental design pre-test/post-test intervention study utilizing a within group analysis was conducted with 45 undergraduate college chemistry students that investigated the effect of implementing a game-based learning environment into an undergraduate college chemistry course in order to learn if serious educational games (SEGs) can be used to achieve knowledge gains of complex chemistry concepts and to achieve increase in students' positive attitude toward chemistry. To evaluate if students learn chemistry concepts by participating in a chemistry game-based learning environment, a one-way repeated measures analysis of variance (ANOVA) was conducted across three time points (pre-test, post-test, delayed post-test which were chemistry content exams). Results showed that there was an increase in exam scores over time. The results of the ANOVA indicated a statistically significant time effect. To evaluate if students' attitude towards chemistry increased as a result of participating in a chemistry game-based learning environment a paired samples t-test was conducted using a chemistry attitudinal survey by Mahdi (2014) as the pre- and post-test. Results of the paired-samples t-test indicated that there was no significant difference in pre-attitudinal scores and post-attitudinal scores.

Light transmittance of zirconia as a function of thickness and microhardness of resin cements under different thicknesses of zirconia

PubMed Central

Egilmez, Ferhan; Ergun, Gulfem; Kaya, Bekir M.

2013-01-01

Objective: The objective of this study was to compare microhardness of resin cements under different thicknesses of zirconia and the light transmittance of zirconia as a function of thickness. Study design: A total of 126 disc-shaped specimens (2 mm in height and 5 mm in diameter) were prepared from dual-cured resin cements (RelyX Unicem, Panavia F and Clearfil SA cement). Photoactivation was performed by using quartz tungsten halogen and light emitting diode light curing units under different thicknesses of zirconia. Then the specimens (n=7/per group) were stored in dry conditions in total dark at 37°C for 24 h. The Vicker’s hardness test was performed on the resin cement layer with a microhardness tester. Statistical significance was determined using multifactorial analysis of variance (ANOVA) (alpha=.05). Light transmittance of different thicknesses of zirconia (0.3, 0.5 and 0.8 mm) was measured using a hand-held radiometer (Demetron, Kerr). Data were analyzed using one-way ANOVA test (alpha=.05). Results: ANOVA revealed that resin cement and light curing unit had significant effects on microhardness (p < 0.001). Additionally, greater zirconia thickness resulted in lower transmittance. There was no correlation between the amount of light transmitted and microhardness of dual-cured resin cements (r = 0.073, p = 0.295). Conclusion: Although different zirconia thicknesses might result in insufficient light transmission, dual-cured resin cements under zirconia restorations could have adequate microhardness. Key words:Zirconia, microhardness, light transmittance, resin cement. PMID:23385497

Statistical Assessment of a Paired-site Approach for Verification of Carbon and Nitrogen Sequestration on CRP Land

NASA Astrophysics Data System (ADS)

Kucharik, C.; Roth, J.

2002-12-01

The threat of global climate change has provoked policy-makers to consider plausible strategies to slow the accumulation of greenhouse gases, especially carbon dioxide, in the atmosphere. One such idea involves the sequestration of atmospheric carbon (C) in degraded agricultural soils as part of the Conservation Reserve Program (CRP). While the potential for significant C sequestration in CRP grassland ecosystems has been demonstrated, the paired-site sampling approach traditionally used to quantify soil C changes has not been evaluated with robust statistical analysis. In this study, 14 paired CRP (> 8 years old) and cropland sites in Dane County, Wisconsin (WI) were used to assess whether a paired-site sampling design could detect statistically significant differences (ANOVA) in mean soil organic C and total nitrogen (N) storage. We compared surface (0 to 10 cm) bulk density, and sampled soils (0 to 5, 5 to 10, and 10 to 25 cm) for textural differences and chemical analysis of organic matter (OM), soil organic C (SOC), total N, and pH. The CRP contributed to lowering soil bulk density by 13% (p < 0.0001) and increased SOC and OM storage (kg m-2) by 13 to 17% in the 0 to 5 cm layer (p = 0.1). We tested the statistical power associated with ANOVA for measured soil properties, and calculated minimum detectable differences (MDD). We concluded that 40 to 65 paired sites and soil sampling in 5 cm increments near the surface were needed to achieve an 80% confidence level (α = 0.05; β = 0.20) in soil C and N sequestration rates. Because soil C and total N storage was highly variable among these sites (CVs > 20%), only a 23 to 29% change in existing total organic C and N pools could be reliably detected. While C and N sequestration (247 kg C ha{-1 } yr-1 and 17 kg N ha-1 yr-1) may be occurring and confined to the surface 5 cm as part of the WI CRP, our sampling design did not statistically support the desired 80% confidence level. We conclude that usage of statistical power analysis is essential to insure a high level of confidence in soil C and N sequestration rates that are quantified using paired plots.

[Analysis of variance of repeated data measured by water maze with SPSS].

PubMed

Qiu, Hong; Jin, Guo-qin; Jin, Ru-feng; Zhao, Wei-kang

2007-01-01

To introduce the method of analyzing repeated data measured by water maze with SPSS 11.0, and offer a reference statistical method to clinical and basic medicine researchers who take the design of repeated measures. Using repeated measures and multivariate analysis of variance (ANOVA) process of the general linear model in SPSS and giving comparison among different groups and different measure time pairwise. Firstly, Mauchly's test of sphericity should be used to judge whether there were relations among the repeatedly measured data. If any (P

Visual classification of very fine-grained sediments: Evaluation through univariate and multivariate statistics

USGS Publications Warehouse

Hohn, M. Ed; Nuhfer, E.B.; Vinopal, R.J.; Klanderman, D.S.

1980-01-01

Classifying very fine-grained rocks through fabric elements provides information about depositional environments, but is subject to the biases of visual taxonomy. To evaluate the statistical significance of an empirical classification of very fine-grained rocks, samples from Devonian shales in four cored wells in West Virginia and Virginia were measured for 15 variables: quartz, illite, pyrite and expandable clays determined by X-ray diffraction; total sulfur, organic content, inorganic carbon, matrix density, bulk density, porosity, silt, as well as density, sonic travel time, resistivity, and ??-ray response measured from well logs. The four lithologic types comprised: (1) sharply banded shale, (2) thinly laminated shale, (3) lenticularly laminated shale, and (4) nonbanded shale. Univariate and multivariate analyses of variance showed that the lithologic classification reflects significant differences for the variables measured, difference that can be detected independently of stratigraphic effects. Little-known statistical methods found useful in this work included: the multivariate analysis of variance with more than one effect, simultaneous plotting of samples and variables on canonical variates, and the use of parametric ANOVA and MANOVA on ranked data. ?? 1980 Plenum Publishing Corporation.

Effects of perceived parental attitudes on children's views of smoking.

PubMed

Ozturk, Candan; Kahraman, Seniha; Bektas, Murat

2013-01-01

The aim of this study was to examine the effects of perceived parental attitudes on children's discernment of cigarettes. The study sample consisted of 250 children attending grades 6, 7 and 8. Data were collected via a socio-demographic survey questionnaire, the Parental Attitude Scale (PAS) and the Decisional Balance Scale (DBS). Data analysis covered percentages, medians, one-way analysis of variance (ANOVA) and post-hoc tests using a statistical package. There were 250 participants; 117 were male, 133 were female. The mean age was 13.1 ± 0.98 for the females and 13.3 ± 0.88 for the males. A statistically significant difference was found in the children's mean scores for 'pros' subscale on the Decisional Balance Scale (DBS) according to perceived parental attitudes (F=3.172, p=0.025). There were no statistically significant differences in the DBS 'cons' subscale scores by perceived parental attitudes. It was determined that while perceived parental attitudes affect children's views on advantages of smoking, they have no effect on children's views on its disadvantages.

Comparative evaluation of the accuracy of linear measurements between cone beam computed tomography and 3D microtomography.

PubMed

Mangione, Francesca; Meleo, Deborah; Talocco, Marco; Pecci, Raffaella; Pacifici, Luciano; Bedini, Rossella

2013-01-01

The aim of this study was to evaluate the influence of artifacts on the accuracy of linear measurements estimated with a common cone beam computed tomography (CBCT) system used in dental clinical practice, by comparing it with microCT system as standard reference. Ten bovine bone cylindrical samples containing one implant each, able to provide both points of reference and image quality degradation, have been scanned by CBCT and microCT systems. Thanks to the software of the two systems, for each cylindrical sample, two diameters taken at different levels, by using implants different points as references, have been measured. Results have been analyzed by ANOVA and a significant statistically difference has been found. Due to the obtained results, in this work it is possible to say that the measurements made with the two different instruments are still not statistically comparable, although in some samples were obtained similar performances and therefore not statistically significant. With the improvement of the hardware and software of CBCT systems, in the near future the two instruments will be able to provide similar performances.

Influence of Different Enamel Shades and Thickness on Chroma and Value of Dentin Vita Shade: An in vitro Comparative Assessment Study.

PubMed

Hajira, Noor Saira Wajid Najma; Mehta, Deepak; Ashwini, P; Meena, N; Usha, H L

2015-04-01

The aim of the present study is to determine the influence of different enamel shades of various thickness on chroma and value of vita shade of dentin. Three enamel composite resin shades (Enamel white, grey and neutral) and one dentin shade (A 2) from A melogen Plus (Ultradent) was used. Ninety Enamel disk specimens of 0.5, 0.75 and 1 mm thickness and 10 mm in diameter for each shade and 90 dentin disk specimens of 2 mm in thickness and 10 mm in diameter was used for the study. The spectrophotometric values of the dentin shade with and without enamel specimens were recorded and the values were converted to CIEL*a*b values. Statistical analysis was done using Pearson correlation coefficients to verify the effect of thickness on Chroma and value, and the significance was evaluated by one-way ANOVA and Tukey post hoc test. Two way ANOVA and Tukey post hoc was done to verify the variation within the groups. Results revealed a significant positive correlation between thickness and chroma and a negative correlation between thickness and value. There was a statistically significant variation in between the groups. All groups produced a significant increase in chroma with increase in thickness of enamel shade upto a thickness of 0.75 mm after which the behavior of each shade was erratic. Hence, the optimum thickness would be 0.75 mm. All groups produced a significant decrease in value with increase in thickness of enamel shade. Enamel white produced the greatest reduction in value, enamel neutral the least and enamel grey demonstrated an intermediate result. There is a need to have a knowledge of the effect on chroma and value when dentin is layered with different enamel shades, it is also important to understand the effect of these enamel shades at different thicknesses to better control the color and reproduce esthetic simulating natural teeth.

The efficacy of adding dexamethasone, midazolam, or epinephrine to 0.5% bupivacaine in supraclavicular brachial plexus block.

PubMed

El-Baradey, Ghada F; Elshmaa, Nagat S

2014-11-01

The aim was to assess the effectiveness of adding either dexamethasone or midazolam in comparison with epinephrine addition to 0.5% bupivacaine in supraclavicular brachial plexus block. This is a prospective randomized controlled observer-blinded study. This study was carried out in Tanta University Hospital on 60 patients of both sexes; American Society of Anesthesiologists physical Status I and II, age range from 18 to 45 years undergo elective surgery to upper limb. All patients were anesthetized with ultrasound guided supraclavicular brachial plexus block and randomly divided into three groups (each group 20 patients) Group E (epinephrine): 30 mL bupivacaine 0.5%with 1:200,000 epinephrine (5 μg/mL). Group D (dexamethasone): 30 mL bupivacaine 0.5% and dexamethasone 8 mg. Group M (midazolam): 30 ml bupivacaine 0.5% and midazolam 50 μg/kg. The primary outcome measures were onset and duration of sensory and motor block and time to first analgesic request. The windows version of SPSS 11.0.1 (SPSS Inc., Chicago, IL, USA) was used for statistical analysis. Data were presented in form of mean ± standard deviation multiple analysis of variance (ANOVA) was used to compare the three groups and Scheffe test was used after ANOVA. Power of significance P < 0.05 was considered to be statistically significant. Onset of sensory and motor block was significantly rapid (P < 0.05) in Groups D and M in comparison with Group E. Time of administration of rescue analgesic, duration of sensory and motor block showed significant increase (P < 0.05) in Group D in comparison with Group M which showed significant increase (P < 0.05) in comparison with Group E. In comparison with epinephrine and midazolam addition of dexamethasone to bupivacaine had rapid onset of block and longer time to first analgesic request with fewer side-effects.

The effect of yoga in stress reduction for dental students performing their first periodontal surgery: A randomized controlled study

PubMed Central

Shankarapillai, Rajesh; Nair, Manju Anathakrishnan; George, Roy

2012-01-01

Context: The dental students experience a lot of stress, which increase when they perform their first surgical procedure. Yoga as an anxiolytic tool in anxiety reduction has been practiced over centuries in India. Aim: To assess the efficacy of yoga in reducing the state trait anxiety of dental students before their first periodontal surgery performance. Settings and Design: A randomized controlled study using a two-way split plot design (pre-post-test) was conducted in the department of periodontics, Pacific Dental College, Udaipur, India. Materials and Methods: One hundred clinical dental students who were ready to perform their first periodontal surgery were selected. Students were randomly assigned to two groups and were given a 60-min session on stress reduction. Group A, yogic intervention group, were instructed to do yoga and their performances were monitored for a period of one week and Group B, control group, were given a lecture on stress reduction without any yoga instructions. The investigator who was unaware of the groups had taken the state trait anxiety score of the students three times a) before assigning them to each group, b) prior to the surgical procedure and c) immediately after the performance of surgery. Statistical Analysis Used: Analyses of variance (ANOVA) by SPSS V.16. Results: The statistical results showed a significant reduction in the VAS and state trait anxiety of Group A compared to Group B (ANOVA; P<0.001). Conclusions: This study concludes that Yogic breathing has a significant effect on the reduction of state trait anxiety level of dental students. PMID:22346066

Effect of thermocycling on nickel release from orthodontic arch wires: an in vitro study.

PubMed

Sheibaninia, Ahmad

2014-12-01

The amount of daily intake of metals from orthodontic appliances over time is a matter of great concern. Nickel results in one of the most common metal-induced allergic contact dermatitis in humans; it produces more allergic reactions than all the other metals combined together. The purpose of this study was to evaluate the effects of thermocycling on the nickel release from orthodontic arch wires stored in artificial saliva with different pH values. Forty new wire pieces were selected. Each wire piece was placed in a special capillary Pyrex tube filled with artificial saliva, which was sealed and immersed in deionized water at 37 °C. The samples were divided into four groups of ten. Group I received no treatment; group II was subjected to thermocycling. The pH of storage in groups III and IV was reduced to 4.5, and group IV was subjected to thermocycling. Thermocycling was carried out between 5 and 55 °C for 500 cycles. The release of nickel ions was statistically analyzed by two-way ANOVA for the effects of two variables: pH and thermocycling. The interaction between pH and thermocycling was found to be statistically significant (F = 12.127, P = 0.001). Two-way ANOVA showed that different storage media or pH and thermocycling had a significant effect on the nickel release (F = 52.812, P < 0.001 and F = 197.035, P < 0.001, respectively). Thermocycling and pH can adversely affect the release of nickel from orthodontic wires, while thermocycling is clearly the dominant factor.

Interactive binocular treatment (I-BiT) for amblyopia: results of a pilot study of 3D shutter glasses system.

PubMed

Herbison, N; Cobb, S; Gregson, R; Ash, I; Eastgate, R; Purdy, J; Hepburn, T; MacKeith, D; Foss, A

2013-09-01

A computer-based interactive binocular treatment system (I-BiT) for amblyopia has been developed, which utilises commercially available 3D 'shutter glasses'. The purpose of this pilot study was to report the effect of treatment on visual acuity (VA) in children with amblyopia. Thirty minutes of I-BiT treatment was given once weekly for 6 weeks. Treatment sessions consisted of playing a computer game and watching a DVD through the I-BiT system. VA was assessed at baseline, mid-treatment, at the end of treatment, and at 4 weeks post treatment. Standard summary statistics and an exploratory one-way analysis of variance (ANOVA) were performed. Ten patients were enrolled with strabismic, anisometropic, or mixed amblyopia. The mean age was 5.4 years. Nine patients (90%) completed the full course of I-BiT treatment with a mean improvement of 0.18 (SD=0.143). Six out of nine patients (67%) who completed the treatment showed a clinically significant improvement of 0.125 LogMAR units or more at follow-up. The exploratory one-way ANOVA showed an overall effect over time (F=7.95, P=0.01). No adverse effects were reported. This small, uncontrolled study has shown VA gains with 3 hours of I-BiT treatment. Although it is recognised that this pilot study had significant limitations-it was unblinded, uncontrolled, and too small to permit formal statistical analysis-these results suggest that further investigation of I-BiT treatment is worthwhile.

Three-dimensional analysis of enamel surface alteration resulting from orthodontic clean-up -comparison of three different tools.

PubMed

Janiszewska-Olszowska, Joanna; Tandecka, Katarzyna; Szatkiewicz, Tomasz; Stępień, Piotr; Sporniak-Tutak, Katarzyna; Grocholewicz, Katarzyna

2015-11-18

The present study aimed at 3D analysis of adhesive remnants and enamel loss following the debonding of orthodontic molar tubes and orthodontic clean-up to assess the effectiveness and safety of One-Step Finisher and Polisher and Adhesive Residue Remover in comparison to tungsten carbide bur. Thirty human molars were bonded with chemical-cure orthodontic adhesive (Unite, 3M, USA), stored 24 h in 0.9 % saline solution, debonded and cleaned using three methods (Three groups of ten): tungsten carbide bur (Dentaurum, Pforzheim, Germany), one-step finisher and polisher (One gloss, Shofu Dental, Kyoto, Japan) and Adhesive Residue Remover (Dentaurum, Pforzheim, Germany). Direct 3D scanning in blue-light technology to the nearest 2 μm was performed before etching and after adhesive removal. Adhesive remnant height and volume as well as enamel loss depth and volume were calculated. An index of effectiveness and safety was proposed and calculated for every tool; adhesive remnant volume and duplicated enamel lost volume were divided by a sum of multiplicands. Comparisons using parametric ANOVA or nonparametric ANOVA rank Kruskal-Wallis tests were used to compare between tools for adhesive remnant height and volume, enamel loss depth and volume as well as for the proposed index. No statistically significant differences in the volume (p = 0.35) or mean height (p = 0.24) of adhesive remnants were found (ANOVA rank Kruskal-Wallis test) between the groups of teeth cleaned using different tools. Mean volume of enamel loss was 2.159 mm(3) for tungsten carbide bur, 1.366 mm(3) for Shofu One Gloss and 0.659 mm(3) for Adhesive Residue Remover - (F = 2.816, p = 0.0078). A comparison of the proposed new index between tools revealed highly statistically significant differences (p = 0.0081), supporting the best value for Adhesive Residue Remover and the worst - for tungsten carbide bur. The evaluated tools were all characterized by similar effectiveness. The most destructive tool with regards to enamel was the tungsten carbide bur, and the least was Adhesive Residue Removal.

Influence of Various Acidic Beverages on Tooth Erosion. Evaluation by a New Method

PubMed Central

Zimmer, Stefan; Kirchner, Georg; Bizhang, Mozhgan; Benedix, Mathias

2015-01-01

Material & Methods We have analyzed the loss of enamel and dentine after exposure to different non-alcoholic drinks with a simple new method using bovine teeth. 100 enamel and 100 dentine specimens from freshly extracted bovine incisors were randomly attributed to 10 groups (n=10 for enamel and dentine each). Prior to the start of the experiment all specimens were weighed using a precision balance. The mean initial masses (SD) were 35.8 mg (7.2) for enamel and 24.7 mg (7.0) for dentine. No statistically significant differences were found between groups for initial masses (p>0.05, ANOVA with Bonferroni post hoc test). Thereafter, all specimens of one group were simultaneously placed in 200 ml of the following fluids: Coca-Cola, Coca-Cola light, Sprite, apple juice, Red Bull, orange juice, Bonaqua Fruits (Mango-Acai), tap water, chlorinated swimming pool water, and lemon juice. Fluids were continuously ventilated at 37° C for 7 days. Thereafter the specimens were weighed again and the mean mass loss was calculated. Results The values were (enamel/dentine): Coca-Cola 7.5 mg/6.6 mg; Coca-Cola light 5.2 mg/3.5 mg, Sprite 26.1 mg/17.7 mg, apple juice 27.1 mg/15.2 mg, Red Bull 16.6 mg/17.0 mg, orange juice 24.3 mg/20.2 mg, Bonaqua Fruits (Mango-Acai) 17.8 mg/16.2 mg, tap water -0.2 mg/-0.3 mg, swimming pool water -0.3 mg/-0.2 mg, and lemon juice 32.0 mg/28.3 mg. From all drinks, Cola and Cola light showed the least erosivity (p<0.001, ANOVA with Bonferroni post hoc test) whereas lemon juice showed statistically significant higher erosivity than all other drinks except Sprite and apple juice (p<0.01, ANOVA with Bonferroni post hoc test). Conclusions In conclusion, erosivity of common non-alcoholic drinks varies widely. For example, Sprite, apple juice, and orange juice are about five times more erosive than Coca-Cola light. The findings from the present study should be taken into account in choosing a diet that provides satisfactory nutrition while minimizing tooth erosion. PMID:26035729

Influence of various acidic beverages on tooth erosion. Evaluation by a new method.

PubMed

Zimmer, Stefan; Kirchner, Georg; Bizhang, Mozhgan; Benedix, Mathias

2015-01-01

We have analyzed the loss of enamel and dentine after exposure to different non-alcoholic drinks with a simple new method using bovine teeth. 100 enamel and 100 dentine specimens from freshly extracted bovine incisors were randomly attributed to 10 groups (n=10 for enamel and dentine each). Prior to the start of the experiment all specimens were weighed using a precision balance. The mean initial masses (SD) were 35.8 mg (7.2) for enamel and 24.7 mg (7.0) for dentine. No statistically significant differences were found between groups for initial masses (p>0.05, ANOVA with Bonferroni post hoc test). Thereafter, all specimens of one group were simultaneously placed in 200 ml of the following fluids: Coca-Cola, Coca-Cola light, Sprite, apple juice, Red Bull, orange juice, Bonaqua Fruits (Mango-Acai), tap water, chlorinated swimming pool water, and lemon juice. Fluids were continuously ventilated at 37° C for 7 days. Thereafter the specimens were weighed again and the mean mass loss was calculated. The values were (enamel/dentine): Coca-Cola 7.5 mg/6.6 mg; Coca-Cola light 5.2 mg/3.5 mg, Sprite 26.1 mg/17.7 mg, apple juice 27.1 mg/15.2 mg, Red Bull 16.6 mg/17.0 mg, orange juice 24.3 mg/20.2 mg, Bonaqua Fruits (Mango-Acai) 17.8 mg/16.2 mg, tap water -0.2 mg/-0.3 mg, swimming pool water -0.3 mg/-0.2 mg, and lemon juice 32.0 mg/28.3 mg. From all drinks, Cola and Cola light showed the least erosivity (p<0.001, ANOVA with Bonferroni post hoc test) whereas lemon juice showed statistically significant higher erosivity than all other drinks except Sprite and apple juice (p<0.01, ANOVA with Bonferroni post hoc test). In conclusion, erosivity of common non-alcoholic drinks varies widely. For example, Sprite, apple juice, and orange juice are about five times more erosive than Coca-Cola light. The findings from the present study should be taken into account in choosing a diet that provides satisfactory nutrition while minimizing tooth erosion.

Linearised and non-linearised isotherm models optimization analysis by error functions and statistical means

PubMed Central

2014-01-01

In adsorption study, to describe sorption process and evaluation of best-fitting isotherm model is a key analysis to investigate the theoretical hypothesis. Hence, numerous statistically analysis have been extensively used to estimate validity of the experimental equilibrium adsorption values with the predicted equilibrium values. Several statistical error analysis were carried out. In the present study, the following statistical analysis were carried out to evaluate the adsorption isotherm model fitness, like the Pearson correlation, the coefficient of determination and the Chi-square test, have been used. The ANOVA test was carried out for evaluating significance of various error functions and also coefficient of dispersion were evaluated for linearised and non-linearised models. The adsorption of phenol onto natural soil (Local name Kalathur soil) was carried out, in batch mode at 30 ± 20 C. For estimating the isotherm parameters, to get a holistic view of the analysis the models were compared between linear and non-linear isotherm models. The result reveled that, among above mentioned error functions and statistical functions were designed to determine the best fitting isotherm. PMID:25018878

Psychometrics of a brief measure of emotional self-efficacy among adolescents from the United States.

PubMed

Valois, Robert F; Zullig, Keith J

2013-10-01

Preliminary data were collected to evaluate the psychometric properties of an emotional self-efficacy (ESE) measure in a sample of 3836 public high school adolescents who completed the Centers for Disease Control and Prevention (CDC) Youth Risk Behavior Survey in South Carolina. Principal axis factor analysis was followed by a 4-way between-groups analysis of variance (ANOVA) testing for differences in total score means on selected demographic estimates and their interactions. Relationships between total score and selected risk behaviors were examined through a series of 1-way ANOVA procedures and subsequent Tukey Honest Significant Difference (HSD) tests. Factor analysis results suggested that a 1-factor model best explained factor structure of the scale items (factor loadings .64 to .71, eigenvalue = 3.24, h(2)  = .46). Girls reported a significantly higher mean total ESE rating than boys; White students reported a significantly higher mean total ESE rating than Black students. Statistically significant lower mean total ESE ratings were also noted for those who reported physical fighting, lifetime alcohol use, and sexual intercourse. This 7-item scale is a reliable measure and could aid school health researchers and mental health practitioners in psychosocial screening and as an outcome of social and emotional learning as a brief measure of adolescent ESE. © 2013, American School Health Association.

Use of a Self-Instructional Radiographic Anatomy Module for Dental Hygiene Faculty Calibration.

PubMed

Brame, Jennifer L; AlGheithy, Demah Salem; Platin, Enrique; Mitchell, Shannon H

2017-06-01

Purpose: Dental hygiene educators often provide inconsistent instruction in clinical settings and various attempts to address the lack of consistency have been reported in the literature. The purpose of this pilot study was to determine if the use of a use of a self-instructional, radiographic anatomy (SIRA) module improved DH faculty calibration regarding the identifica-tion of normal intraoral and extraoral radiographic anatomy and whether its effect could be sustained over a period of four months. Methods: A convenience sample consisting of all dental hygiene faculty members involved in clinical instruction (N=23) at the University of North Carolina (UNC) was invited to complete the four parts of this online pilot study: a pre-test, review of the SIRA module, an immediate post-test, and a four-month follow-up post-test. Descriptive analyses, the Friedman's ANOVA, and the exact form of the Wilcoxon-Signed-Rank test were used to an-alyze the data. Level of significance was set at 0.05. Participants who did not complete all parts of the study were omitted from data analysis comparing the pre to post-test performance. Results: The pre-test response rate was 73.9% (N=17), and 88.2% (N=15) of those initial participants completed both the immediate and follow-up post-tests. Faculty completing all parts of the study consisted of: 5 full-time faculty, 5 part-time faculty, and 5 graduate teaching assistants. The Friedman's ANOVA revealed no statistically significant difference (P=0.179) in percentages of correct responses between the three tests (pre, post and follow-up). The exact form of the Wilcoxon-Signed-Rank test revealed marginal significance when comparing percent of correct responses at pre-test and immediate post-test (P=0.054), and no statistically significant difference when comparing percent of correct responses at immediate post-test and the follow-up post-test four months later (P=0.106). Conclusions: Use of a SIRA module did not significantly affect DH faculty test performance. Lack of statistical significance in the percentages of correct responses between the three tests may have been affected by the small number of participants completing all four parts of the study (N=15). Additional research is needed to identify and improve methods for faculty calibration. Copyright © 2017 The American Dental Hygienists’ Association.

T-cell homeostasis in breast cancer survivors with persistent fatigue.

PubMed

Bower, Julienne E; Ganz, Patricia A; Aziz, Najib; Fahey, John L; Cole, Steve W

2003-08-06

Approximately 30% of women successfully treated for breast cancer suffer persistent fatigue of unknown origin. Recent studies linking inflammatory processes to central nervous system-mediated fatigue led us to examine cellular immune system status in 20 fatigued breast cancer survivors and 19 matched non-fatigued breast cancer survivors. Fatigued survivors, compared with non-fatigued survivors, had statistically significantly increased numbers of circulating T lymphocytes (mean 31% increase, 95% confidence interval [CI] = 6% to 56%; P =.015 by two-sided analysis of variance [ANOVA]), with pronounced elevation in the numbers of CD4+ T lymphocytes (mean 41% increase, 95% CI = 15% to 68%; P =.003 by two-sided ANOVA) and CD56+ effector T lymphocytes (mean 52% increase, 95% CI = 4% to 99%; P =.027 by two-sided ANOVA). These changes were independent of patient demographic and treatment characteristics. Absolute numbers of B cells, natural killer cells, granulocytes, and monocytes were not altered. The increased numbers of circulating T cells correlated with elevations in the level of serum interleukin 1 receptor antagonist (for CD3+ cells, r =.56 and P =.001; for CD3+/CD4+ cells, r =.68 and P<.001, by Spearman rank correlation). Results of this study suggest that persistent fatigue in breast cancer survivors might be associated with a chronic inflammatory process involving the T-cell compartment. These results require confirmation in a larger study that is specifically designed to address this hypothesis.

Impact of pictorial warning labels on tobacco products among patients attending outpatient department of a dental college in Bangalore city: A cross-sectional study.

PubMed

Vanishree, N; Narayan, R R; Naveen, N; Bullapa, D; Vignesh, D; P Raveendran, N M

2017-01-01

The aim of this study is to assess the knowledge, attitude, and impact of pictorial warnings present on tobacco packets among patients attending outpatient department of a dental college of Bangalore city. A cross-sectional study was conducted among 419 patients through convenience sampling, using a structured close-ended questionnaire containing 35 questions. The participants were approached and invited to participate voluntarily. The data obtained were analyzed using descriptive statistics, Chi-square test and ANOVA. Mean age of the participants was 28.1 ± 7.06 years. Out of total 419 participants, 62.8% were tobacco users. About 40.6% of the participants had average knowledge and only 22.9% had positive attitude regarding the pictorial warnings. Nearly 77.9% of tobacco users had previously attempted decreased frequency of tobacco use and 63.7% had tried quitting the habit. The difference was statistically significant (P < 0.05 Chi-square test and ANOVA). The present study revealed that most of study participants have noticed the warnings on tobacco products, and most of them believe that they could understand warning labels. This study also showed that most of study participants believed that pictorial health warnings create awareness about probable health hazards of tobacco use and that these pictorial presentations on tobacco packs positively assist in reducing or quitting tobacco smoking.

Resilience Scale-25 Spanish version: validation and assessment in eating disorders.

PubMed

Las Hayas, Carlota; Calvete, Esther; Gómez del Barrio, Andrés; Beato, Luís; Muñoz, Pedro; Padierna, Jesús Ángel

2014-08-01

To validate into Spanish the Wagnild and Young Resilience Scale - 25 (RS-25), assess and compare the scores on the scale among women from the general population, eating disorder (ED) patients and recovered ED patients. This is a cross-sectional study. ED participants were invited to participate by their respective therapists. The sample from the general population was gathered via an open online survey. Participants (N general population=279; N ED patients=124; and N recovered ED patients=45) completed the RS-25, the World Health Organization Quality of Life Scale-BREF and the Hospital Anxiety and Depression Scale. Mean age of participants ranged from 28.87 to 30.42years old. Statistical analysis included a multi-group confirmatory factor analysis and ANOVA. The two-factor model of the RS-25 produced excellent fit indexes. Measurement invariance across samples was generally supported. The ANOVA found statistically significant differences in the RS-25 mean scores between the ED patients (Mean=103.13, SD=31.32) and the recovered ED participants (Mean=138.42, SD=22.26) and between the ED patients and the general population participants (Mean=136.63, SD=19.56). The Spanish version of the RS-25 is a psychometrically sound measurement tool in samples of ED patients. Resilience is lower in people diagnosed with ED than in recovered individuals and the general population. Copyright © 2014 Elsevier Ltd. All rights reserved.

Why we should use simpler models if the data allow this: relevance for ANOVA designs in experimental biology.

PubMed

Lazic, Stanley E

2008-07-21

Analysis of variance (ANOVA) is a common statistical technique in physiological research, and often one or more of the independent/predictor variables such as dose, time, or age, can be treated as a continuous, rather than a categorical variable during analysis - even if subjects were randomly assigned to treatment groups. While this is not common, there are a number of advantages of such an approach, including greater statistical power due to increased precision, a simpler and more informative interpretation of the results, greater parsimony, and transformation of the predictor variable is possible. An example is given from an experiment where rats were randomly assigned to receive either 0, 60, 180, or 240 mg/L of fluoxetine in their drinking water, with performance on the forced swim test as the outcome measure. Dose was treated as either a categorical or continuous variable during analysis, with the latter analysis leading to a more powerful test (p = 0.021 vs. p = 0.159). This will be true in general, and the reasons for this are discussed. There are many advantages to treating variables as continuous numeric variables if the data allow this, and this should be employed more often in experimental biology. Failure to use the optimal analysis runs the risk of missing significant effects or relationships.

Group cohesion and social support of the nurses in a special unit and a general unit in Korea.

PubMed

Ko, Yu Kyung

2011-07-01

To identify the degree of group cohesion and social support of nurses in special and general units in hospitals in Korea, and to compare group cohesion and social support between the two groups. The level of commitment nurses have to their organizations has been shown to correlate with work group cohesion and social support. The participants were 1751 nurses who were working in Korean hospitals. Data were collected using a structured questionnaire and were analysed using SAS. The statistical methods included: descriptive statistics, t-test, anova and Pearson's correlation coefficients. Group cohesion of nurses on special wards was significantly higher than for nurses on general wards. No significant difference was found between types of units in terms of social support. The degree of group cohesion was significantly different in terms of the respondents' clinical experience, position, religion, job satisfaction, number of supportive superiors and number of supportive peers. A statistically significant correlation was found between group cohesion scores and degree of social support. Hospital management can accomplish their goals more effectively through knowledge of the level of group cohesion, superior support and peer support for nursing staff in accordance with unit specialty. © 2011 The Author. Journal compilation © 2011 Blackwell Publishing Ltd.

Virtual and stereoscopic anatomy: when virtual reality meets medical education.

PubMed

de Faria, Jose Weber Vieira; Teixeira, Manoel Jacobsen; de Moura Sousa Júnior, Leonardo; Otoch, Jose Pinhata; Figueiredo, Eberval Gadelha

2016-11-01

OBJECTIVE The authors sought to construct, implement, and evaluate an interactive and stereoscopic resource for teaching neuroanatomy, accessible from personal computers. METHODS Forty fresh brains (80 hemispheres) were dissected. Images of areas of interest were captured using a manual turntable and processed and stored in a 5337-image database. Pedagogic evaluation was performed in 84 graduate medical students, divided into 3 groups: 1 (conventional method), 2 (interactive nonstereoscopic), and 3 (interactive and stereoscopic). The method was evaluated through a written theory test and a lab practicum. RESULTS Groups 2 and 3 showed the highest mean scores in pedagogic evaluations and differed significantly from Group 1 (p < 0.05). Group 2 did not differ statistically from Group 3 (p > 0.05). Size effects, measured as differences in scores before and after lectures, indicate the effectiveness of the method. ANOVA results showed significant difference (p < 0.05) between groups, and the Tukey test showed statistical differences between Group 1 and the other 2 groups (p < 0.05). No statistical differences between Groups 2 and 3 were found in the practicum. However, there were significant differences when Groups 2 and 3 were compared with Group 1 (p < 0.05). CONCLUSIONS The authors conclude that this method promoted further improvement in knowledge for students and fostered significantly higher learning when compared with traditional teaching resources.

Surface hardness evaluation of different composite resin materials: influence of sports and energy drinks immersion after a short-term period

PubMed Central

ERDEMİR, Ugur; YİLDİZ, Esra; EREN, Meltem Mert; OZEL, Sevda

2013-01-01

Objectives: This study evaluated the effect of sports and energy drinks on the surface hardness of different composite resin restorative materials over a 1-month period. Material and Methods: A total of 168 specimens: Compoglass F, Filtek Z250, Filtek Supreme, and Premise were prepared using a customized cylindrical metal mould and they were divided into six groups (N=42; n=7 per group). For the control groups, the specimens were stored in distilled water for 24 hours at 37º C and the water was renewed daily. For the experimental groups, the specimens were immersed in 5 mL of one of the following test solutions: Powerade, Gatorade, X-IR, Burn, and Red Bull, for two minutes daily for up to a 1-month test period and all the solutions were refreshed daily. Surface hardness was measured using a Vickers hardness measuring instrument at baseline, after 1-week and 1-month. Data were statistically analyzed using Multivariate repeated measure ANOVA and Bonferroni's multiple comparison tests (α=0.05). Results: Multivariate repeated measures ANOVA revealed that there were statistically significant differences in the hardness of the restorative materials in different immersion times (p<0.001) in different solutions (p<0.001). The effect of different solutions on the surface hardness values of the restorative materials was tested using Bonferroni's multiple comparison tests, and it was observed that specimens stored in distilled water demonstrated statistically significant lower mean surface hardness reductions when compared to the specimens immersed in sports and energy drinks after a 1-month evaluation period (p<0.001). The compomer was the most affected by an acidic environment, whereas the composite resin materials were the least affected materials. Conclusions: The effect of sports and energy drinks on the surface hardness of a restorative material depends on the duration of exposure time, and the composition of the material. PMID:23739850

Cervical and Incisal Marginal Discrepancy in Ceramic Laminate Veneering Materials: A SEM Analysis

PubMed Central

Ranganathan, Hemalatha; Ganapathy, Dhanraj M.; Jain, Ashish R.

2017-01-01

Context: Marginal discrepancy influenced by the choice of processing material used for the ceramic laminate veneers needs to be explored further for better clinical application. Aims: This study aimed to evaluate the amount of cervical and incisal marginal discrepancy associated with different ceramic laminate veneering materials. Settings and Design: This was an experimental, single-blinded, in vitro trial. Subjects and Methods: Ten central incisors were prepared for laminate veneers with 2 mm uniform reduction and heavy chamfer finish line. Ceramic laminate veneers fabricated over the prepared teeth using four different processing materials were categorized into four groups as Group I - aluminous porcelain veneers, Group II - lithium disilicate ceramic veneers, Group III - lithium disilicate-leucite-based veneers, Group IV - zirconia-based ceramic veneers. The cervical and incisal marginal discrepancy was measured using a scanning electron microscope. Statistical Analysis Used: ANOVA and post hoc Tukey honest significant difference (HSD) tests were used for statistical analysis. Results: The cervical and incisal marginal discrepancy for four groups was Group I - 114.6 ± 4.3 μm, 132.5 ± 6.5 μm, Group II - 86.1 ± 6.3 μm, 105.4 ± 5.3 μm, Group III - 71.4 ± 4.4 μm, 91.3 ± 4.7 μm, and Group IV - 123.1 ± 4.1 μm, 142.0 ± 5.4 μm. ANOVA and post hoc Tukey HSD tests observed a statistically significant difference between the four test specimens with regard to cervical marginal discrepancy. The cervical and incisal marginal discrepancy scored F = 243.408, P < 0.001 and F = 180.844, P < 0.001, respectively. Conclusion: This study concluded veneers fabricated using leucite reinforced lithium disilicate exhibited the least marginal discrepancy followed by lithium disilicate ceramic, aluminous porcelain, and zirconia-based ceramics. The marginal discrepancy was more in the incisal region than in the cervical region in all the groups. PMID:28839415

Ethiopian health care professionals' knowledge, attitude, and interests toward pharmacogenomics.

PubMed

Abdela, Ousman Abubeker; Bhagavathula, Akshaya Srikanth; Gebreyohannes, Eyob Alemayehu; Tegegn, Henok Getachew

2017-01-01

Pharmacogenomics is a field of science which studies the impact of inheritance on individual variation in medication therapy response. We assessed healthcare professionals' knowledge, attitude, and interest toward pharmacogenomics. A cross-sectional survey was conducted using a 32-item questionnaire among physicians, nurses, and pharmacists who were working at the University of Gondar Referral and Teaching Hospital in northwest Ethiopia. Descriptive statistics was applied, and the categorical variables were summarized as frequency and percentages. An analysis of variance (ANOVA) test was performed to compare mean scores among health professionals. A p -value of <0.05 was considered as statistically significant. Of 292 health professionals who responded, the majority were male (60%) and the mean age of study participants was 27.00 (±4.85 SD) years. The mean knowledge scores of all participants, pharmacists, physicians, and nurses were 2.343±1.109, 2.671±1.059, 2.375±1.093, and 2.173±1.110, respectively. Based on the ANOVA test, a statistically significant difference was noted in mean knowledge score between pharmacists and nurses ( p =0.002). More than two-thirds (67.33%) of nurses, 42.86% of pharmacists, and 40.27% of physicians who participated did not know that genetic variations can account for as much as 95% of the variability in drug disposition and effects. The ability to accurately apply their knowledge to drug therapy selection, dosing, or monitoring parameter was reported by 35.3% of the participants. More than two-thirds (69.2%) of participants thought that pharmacogenomic testing will allow the identification of the right drug with less side effects. Most of the participants (83.2%) also requested to have training on pharmacogenomics. Participants showed limited knowledge, but they had positive attitude toward pharmacogenomics. Educational programs focusing on pharmacogenomic testing and its clinical application need to be emphasized.

Analysis of half diallel mating designs I: a practical analysis procedure for ANOVA approximation.

Treesearch

G.R. Johnson; J.N. King

1998-01-01

Procedures to analyze half-diallel mating designs using the SAS statistical package are presented. The procedure requires two runs of PROC and VARCOMP and results in estimates of additive and non-additive genetic variation. The procedures described can be modified to work on most statistical software packages which can compute variance component estimates. The...

Evaluation of implant osseointegration with different regeneration techniques in the treatment of bone defects around implants: an experimental study in a rabbit model.

PubMed

Guerra, Isabel; Morais Branco, Fernando; Vasconcelos, Mário; Afonso, Américo; Figueiral, Helena; Zita, Raquel

2011-03-01

The aim of this study was to evaluate the osseointegration of implants placed in areas with artificially created bone defects, using three bone regeneration techniques. The experimental model was the rabbit femur (16), where bone defects were created and implants were placed. The peri-implant bone defects were filled with a deproteinized bovine bone mineral, NuOss™ (N), NuOss™ combined with plasma rich in growth factors (PRGF) (N+PRGF), NuOss™ covered by an RCM(6) membrane (N+M), or remained unfilled (control group [C]). After 4 and 8 weeks, the animals were euthanized and bone tissue blocks with the implants and the surrounding bone tissue were removed and processed according to a histological protocol for hard tissues on non-decalcified ground sections. The samples were studied by light and electron scanning microscopy, histometric analysis was performed to assess the percentage of bone in direct contact with the implant surface and a statistical analysis of the results was performed. In the samples analyzed 4 weeks after implantation, the percentage of bone tissue in direct contact with the implant surface for the four groups were 57.66±24.39% (N), 58.62±20.37% (N+PRGF), 70.82±20.34 % (N+M) and 33.07±5.49% (C). In the samples with 8 weeks of implantation time, the percentage of bone in direct contact was 63.35±27.69% (N), 58.42±24.77% (N+PRGF), 78.02±15.13% (N+M) and 40.28±27.32% (C). In terms of the percentage of bone contact, groups N and N+M presented statistically significant differences from group C in the 4-week trial test (P<0.05; ANOVA). For the 8-week results, only group N+M showed statistically significant differences when compared with group C (P<0.05; ANOVA). In conclusion, the NuOss™ granules/RCM(6) membrane combination presented a percentage of bone contact with the implant surface statistically greater than in the other groups. © 2010 John Wiley & Sons A/S.

Chlorine dioxide water disinfection: a prospective epidemiology study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael, G.E.; Miday, R.K.; Bercz, J.P.

An epidemiologic study of 198 persons exposed for 3 months to drinking water disinfected with chlorine dioxide was conducted in a rural village. A control population of 118 nonexposed persons was also studied. Pre-exposure hematologic and serum chemical parameters were compared with test results after 115 days of exposure. Chlorite ion levels in the water averaged approximately 5 ppM during the study period. Statistical analysis (ANOVA) of the data failed to identify any significant exposure-related effects. This study suggests that future evaluations of chlorine dioxide disinfection should be directed toward populations with potentially increased sensitivity to hemolytic agents.

Experiential Collaborative Learning and Preferential Thinking

NASA Astrophysics Data System (ADS)

Volpentesta, Antonio P.; Ammirato, Salvatore; Sofo, Francesco

The paper presents a Project-Based Learning (shortly, PBL) approach in a collaborative educational environment aimed to develop design ability and creativity of students coming from different engineering disciplines. Three collaborative learning experiences in product design were conducted in order to study their impact on preferred thinking styles of students. Using a thinking style inventory, pre- and post-survey data was collected and successively analyzed through ANOVA techniques. Statistically significant results showed students successfully developed empathy and an openness to multiple perspectives. Furthermore, data analysis confirms that the proposed collaborative learning experience positively contributes to increase awareness in students' thinking styles.

Fracture resistance of Kevlar-reinforced poly(methyl methacrylate) resin: a preliminary study.

PubMed

Berrong, J M; Weed, R M; Young, J M

1990-01-01

The reinforcing effect of Kevlar fibers incorporated in processed poly(methyl methacrylate) resin samples was studied using 0% (controls), 0.5%, 1%, and 2% by weight of the added fibers. The samples were subjected to impact testing to determine fracture resistance, and sample groups were statistically compared using an ANOVA. Each reinforced sample had significantly greater fracture resistance (P less than 0.05) than the control, and no difference was found either within or between control groups. The use of reinforcing Kevlar fibers appears to enhance the fracture resistance of acrylic resin denture base materials.

Effect of different mixing methods on the physical properties of Portland cement.

PubMed

Shahi, Shahriar; Ghasemi, Negin; Rahimi, Saeed; Yavari, Hamidreza; Samiei, Mohammad; Jafari, Farnaz

2016-12-01

The Portland cement is hydrophilic cement; as a result, the powder-to-liquid ratio affects the properties of the final mix. In addition, the mixing technique affects hydration. The aim of this study was to evaluate the effect of different mixing techniques (conventional, amalgamator and ultrasonic) on some selective physical properties of Portland cement. The physical properties to be evaluated were determined using the ISO 6786:2001 specification. One hundred sixty two samples of Portland cement were prepared for three mixing techniques for each physical property (each 6 samples). Data were analyzed using descriptive statistics, one-way ANOVA and post hoc Tukey tests. Statistical significance was set at P <0.05. The mixing technique had no significant effect on the compressive strength, film thickness and flow of Portland cement ( P >0.05). Dimensional changes (shrinkage), solubility and pH increased significantly by amalgamator and ultrasonic mixing techniques ( P <0.05). The ultrasonic technique significantly decreased working time, and the amalgamator and ultrasonic techniques significantly decreased the setting time ( P <0.05). The mixing technique exerted no significant effect on the flow, film thickness and compressive strength of Portland cement samples. Key words: Physical properties, Portland cement, mixing methods.

A comparative scanning electron microscopic study of the effect of three different rotary instruments on smear layer formation.

PubMed

Shahi, Shahriar; Yavari, Hamid R; Rahimi, Saeed; Reyhani, Mohammad F; Kamarroosta, Zahra; Abdolrahimi, Majid

2009-03-01

The aim of this study was to evaluate the effect of RaCe, FlexMaster and ProFile rotary instruments on smear layer formation by scanning electron microscopy. Eighty-four caries-free freshly extracted human single-rooted teeth were selected and divided into three groups, each containing 28 teeth. The teeth were instrumented with rotary instruments sequentially: Group A: ProFile Rotary Instruments; Group B: FlexMaster Rotary Instruments; and Group C: RaCe Rotary Instruments. Instrumentation was performed by the crown-down method and according to the manufacturer's instructions. The specimens were then examined with SEM according to Hülsmann's classification. One-way ANOVA and a post hoc Tukey test were used for statistical analysis. The results showed that there were no statistically significant differences among the three groups in the coronal third (P = 0.39), but at the apical and middle thirds there were statistically significant differences between the RaCe group and the other groups (P < 0.05). Smear layer in the RaCe group was less than that in the ProFile and FlexMaster groups, but the difference between the ProFile group and FlexMaster group was not statistically significant (P > 0.05). It was concluded that RaCe Rotary Instruments produce less smear layer than FlexMaster and ProFile Rotary Instruments.

Soil carbon inventories under a bioenergy crop (switchgrass): Measurement limitations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garten, C.T. Jr.; Wullschleger, S.D.

Approximately 5 yr after planting, coarse root carbon (C) and soil organic C (SOC) inventories were compared under different types of plant cover at four switchgrass (Panicum virgatum L.) production field trials in the southeastern USA. There was significantly more coarse root C under switchgrass (Alamo variety) and forest cover than tall fescue (Festuca arundinacea Schreb.), corn (Zea mays L.), or native pastures of mixed grasses. Inventories of SOC under switchgrass were not significantly greater than SOC inventories under other plant covers. At some locations the statistical power associated with ANOVA of SOC inventories was low, which raised questions aboutmore » whether differences in SOC could be detected statistically. A minimum detectable difference (MDD) for SOC inventories was calculated. The MDD is the smallest detectable difference between treatment means once the variation, significance level, statistical power, and sample size are specified. The analysis indicated that a difference of {approx}50 mg SOC/cm{sup 2} or 5 Mg SOC/ha, which is {approx}10 to 15% of existing SOC, could be detected with reasonable sample sizes and good statistical power. The smallest difference in SOC inventories that can be detected, and only with exceedingly large sample sizes, is {approx}2 to 3%. These measurement limitations have implications for monitoring and verification of proposals to ameliorate increasing global atmospheric CO{sub 2} concentrations by sequestering C in soils.« less

Concerns and professional development needs of science faculty at Taibah University in adopting blended learning

NASA Astrophysics Data System (ADS)

Al-Sarrani, Nauaf

The purpose of this study was to obtain Science faculty concerns and professional development needs to adopt blended learning in their teaching at Taibah University. To answer these two research questions the survey instrument was designed to collect quantitative and qualitative data from close-ended and open-ended questions. The participants' general characteristics were first presented, then the quantitative measures were presented as the results of the null hypotheses. The data analysis for research question one revealed a statistically significant difference in the participants' concerns in adopting BL by their gender sig = .0015. The significances were found in stages one (sig = .000) and stage five (sig = .006) for female faculty. Therefore, null hypothesis 1.1 was rejected (There are no statistically significant differences between science faculty's gender and their concerns in adopting BL). The data analysis indicated also that there were no relationships between science faculty's age, academic rank, nationality, country of graduation and years of teaching experience and their concerns in adopting BL in their teaching, so the null hypotheses 1.2-7 were accepted (There are no statistically significant differences between Science faculty's age and their concerns in adopting BL, there are no statistically significant differences between Science faculty's academic rank and their concerns in adopting BL, there are no statistically significant differences between Science faculty's nationality and their concerns in adopting BL, there are no statistically significant differences between Science faculty's content area and their concerns in adopting BL, there are no statistically significant differences between Science faculty's country of graduation and their concerns in adopting BL and there are no statistically significant differences between Science faculty's years of teaching experience and their concerns in adopting BL). The data analyses for research question two revealed that there was a statistically significant difference between science faculty's use of technology in teaching by department and their attitudes towards technology integration in the Science curriculum. Lambda MANOVA test result was sig =.019 at the alpha = .05 level. Follow up ANOVA result indicated that Chemistry department was significant in the use of computer-based technology (sig =.049) and instructional technology use (sig =.041). Therefore, null hypothesis 2.1 was rejected (There are no statistically significant differences between science faculty's attitudes towards technology integration in the Science curriculum and faculty's use of technology in teaching by department). The data also revealed that there was no statistically significant difference (p<.05) between science faculty's use of technology in teaching by department and their instructional technology use on pedagogy. Therefore, null hypothesis 2.2 was accepted (There are no statistically significant differences between science faculty's perceptions of the effects of faculty IT use on pedagogy and faculty's use of technology in teaching by department). The data also revealed that there was a statistically significant difference between science faculty's use of technology in teaching by department and their professional development needs in adopting BL. Lambda MANOVA test result was .007 at the alpha = .05 level. The follow up ANOVA results showed that the value of significance of Science faculty's professional development needs for adopting BL was smaller than .05 in the Chemistry department with sig =.001 in instructional technology use. Therefore, null hypothesis 2.3 was rejected (There are no statistically significant differences between Science faculty's perceptions of technology professional development needs and faculty's use of technology in teaching by department). Qualitative measures included analyzing data based on answers to three open-ended questions, numbers thirty-six, seventy-four, and seventy-five. These three questions were on blended learning concerns comments (question 36, which had 10 units), professional development activities, support, or incentive requested (question 74, which had 28 units), and the most important professional development activities, support, or incentive (question 75, which had 37 units). These questions yielded 75 units, 23 categories and 8 themes that triangulated with the quantitative data. These 8 themes were then combined to obtain overall themes for all qualitative questions in the study. The two most important themes were "Professional development" with three categories; Professional development through workshops (10 units), Workshops (10 units), Professional development (5 units) and the second overall theme was "Technical support" with two categories: Internet connectivity (4 units), and Technical support (4 units). Finally, based on quantitative and qualitative data, the summary, conclusions, and recommendations for Taibah University regarding faculty adoption of BL in teaching were presented. The recommendations for future studies focused on Science faculty Level of Use and technology use in Saudi universities.

Body weight changes during the menstrual cycle among university students in Ahvaz, Iran.

PubMed

Haghighizadeh, Mohammad Hossein; Karandish, Majid; Ghoreishi, Mahdiye; Soroor, Farshad; Shirani, Fatemeh

2014-07-01

Weight changes during menstrual cycle may be a cause of concern about body weight among most women. Limited data are available linking menstrual cycle and body weight changes. The aim of this study was to examine the relationship between menstrual cycles and body weight changes among university students in Ahvaz, Iran. This cross-sectional study was conducted on 50 Iranian female students aged 18-24 years. Anthropometric indices were measured according to standard protocols. During a complete menstrual cycle, weights of participants were measured each morning. Seventy eight percent of participants had normal weight (Body Mass Index: 18.5-24.9 kg m(-2)). Body weight increased only slightly during the three days before beginning of the menstruation. By using repeated-measures ANOVA, no statistically significant differences were found in weigh during menstrual cycle (p-value = 0.301). No statistically significant changes were found in body weight during women's menstrual cycle in a group of healthy non-obese Iranian young women. Further studies on overweight and obese women are suggested.

Efficacy of cevimeline vs. pilocarpine in the secretion of saliva: a pilot study.

PubMed

Brimhall, Jae; Jhaveri, Malhar A; Yepes, Juan F

2013-01-01

To determine the efficacy and compare the side-effects of cevimeline and pilocarpine in the secretion of saliva in patients with xerostomia. A randomized, cross-over, double blind study was designed. Fifteen patients with diagnosis of xerostomia were assigned to take either 5 mg of pilocarpine or 30 mg of cevimeline three times a day for four weeks. Salivary flow rates were measured during the initial baseline, first and second month appointments. Statistical analysis was carried out with ANOVA and post hoc t-tests. Twelve patients completed both medication treatments. Although both medications proved to increase salivary secretion, there was no significant difference between pilocarpine and cevimeline. Also, the perceived side-effects between the two medications were similar. Both medications increased the secretion of saliva at the end of four weeks. However, there was a slightly higher increment in saliva with pilocarpine. However, the difference was not statistically significant. ©2013 Special Care Dentistry Association and Wiley Periodicals, Inc.

Measurement of air contamination in different wards of public sector hospital, Sukkur.

PubMed

Memon, Badaruddin AllahDino; Bhutto, Gul Hassan; Rizvi, Wajid Hussain

2016-11-01

The aim of this study was to evaluate and assess the index of bacterial contamination in different wards of the Public Sector Hospital of Sukkur (Teaching) Pakistan; whether or not the air contamination was statistically different from the acceptable level using active and passive sampling. In addition to this main hypothesis, other investigations included: occurrence of the most common bacteria, whether or not the bacterial contamination in the wards was a persistent problem and identification of the effective antibiotics against the indentified bacteria. The evidence sought based on the One Sample T test suggests that there is a (statistically) significant difference between the observed (higher) than the acceptance level (p<0.01), the result based on One-Way ANOVA suggests that the contamination problem was persistent as there was no significant difference among observed contamination of all three visits at (p>0.01) and the result of antibiotic susceptibility test highlights sensitivity and resistance level of antibiotics for the indentified bacteria.

Effect of Time on Gypsum-Impression Material Compatibility

NASA Astrophysics Data System (ADS)

Won, John Boram

The purpose of this study was to evaluate the compatibility of dental gypsum with three recently introduced irreversible hydrocolloid (alginate) alternatives. The test materials were Alginot® (Kerr™), Position Penta Quick® (3M ESPE™) and Silgimix ® (Sultan Dental™). The irreversible hydrocolloid impression material, Jeltrate Plus antimicrobial® (Dentsply Caulk™) served as the control. Materials and Methods: Testing of materials was conducted in accordance with ANSI/ADA Specification No. 18 for Alginate Impression Materials. Statistical Analysis: The 3-Way ANOVA test was used to analyze measurements between different time points at a significance level of (p < 0.05). Outcome: It was found that there was greater compatibility between gypsum and the alternative materials over time than the traditional irreversible hydrocolloid material that was tested. A statistically significant amount of surface change/incompatibility was found over time with the combination of the dental gypsum products and the control impression material (Jeltrate Plus antimicrobial®).

A study of tensile test on open-cell aluminum foam sandwich

NASA Astrophysics Data System (ADS)

Ibrahim, N. A.; Hazza, M. H. F. Al; Adesta, E. Y. T.; Abdullah Sidek, Atiah Bt.; Endut, N. A.

2018-01-01

Aluminum foam sandwich (AFS) panels are one of the growing materials in the various industries because of its lightweight behavior. AFS also known for having excellent stiffness to weight ratio and high-energy absorption. Due to their advantages, many researchers’ shows an interest in aluminum foam material for expanding the use of foam structure. However, there is still a gap need to be fill in order to develop reliable data on mechanical behavior of AFS with different parameters and analysis method approach. Least of researcher focusing on open-cell aluminum foam and statistical analysis. Thus, this research conducted by using open-cell aluminum foam core grade 6101 with aluminum sheets skin tested under tension. The data is analyzed using full factorial in JMP statistical analysis software (version 11). ANOVA result show a significant value of the model which less than 0.500. While scatter diagram and 3D plot surface profiler found that skins thickness gives a significant impact to stress/strain value compared to core thickness.

A fractional factorial probabilistic collocation method for uncertainty propagation of hydrologic model parameters in a reduced dimensional space

NASA Astrophysics Data System (ADS)

Wang, S.; Huang, G. H.; Huang, W.; Fan, Y. R.; Li, Z.

2015-10-01

In this study, a fractional factorial probabilistic collocation method is proposed to reveal statistical significance of hydrologic model parameters and their multi-level interactions affecting model outputs, facilitating uncertainty propagation in a reduced dimensional space. The proposed methodology is applied to the Xiangxi River watershed in China to demonstrate its validity and applicability, as well as its capability of revealing complex and dynamic parameter interactions. A set of reduced polynomial chaos expansions (PCEs) only with statistically significant terms can be obtained based on the results of factorial analysis of variance (ANOVA), achieving a reduction of uncertainty in hydrologic predictions. The predictive performance of reduced PCEs is verified by comparing against standard PCEs and the Monte Carlo with Latin hypercube sampling (MC-LHS) method in terms of reliability, sharpness, and Nash-Sutcliffe efficiency (NSE). Results reveal that the reduced PCEs are able to capture hydrologic behaviors of the Xiangxi River watershed, and they are efficient functional representations for propagating uncertainties in hydrologic predictions.

Anteroposterior condylar position: a comparative study between subjects with normal occlusion and patients with Class I, Class II Division 1, and Class III malocclusions.

PubMed

Fraga, Marcelo Reis; Rodrigues, Andréia Fialho; Ribeiro, Luiz Claudio; Campos, Marcio José da Silva; Vitral, Robert Willer Farinazzo

2013-10-29

The present study aimed to determine and compare the anteroposterior position of the condyle in the mandibular fossa between groups of asymptomatic subjects with normal occlusion and asymptomatic subjects with Class I, Class II Division 1, and Class III malocclusions. Thirty persons with normal occlusion, 30 with Class I malocclusion, 30 with Class II Division 1, and 30 with Class III had computed tomography scans of their temporomandibular joints. The anterior joint space/posterior joint space (AJS/PJS) ratio was determined for the right and left joints. The paired t test was used to analyze the AJS/PJS ratio between both sides for each group. The ANOVA test was applied to verify the differences between the groups for the measurements of the right and left sides. In case the ANOVA test confirmed significance, the Dunnett's t test was performed to compare the groups of malocclusion with that of normal occlusion. The paired t test between the AJS/PJS relationships in the right and left sides showed the following p values: Class I (0.168), Class II Division 1 (0.662), Class III (0.991), and normal occlusion (0.390). The ANOVA test showed a p value of 0.445 for the comparisons of the right side and 0.040 for the left side. The Dunnett's t test demonstrated a statistically significant difference between the Class II group and the normal occlusion group (p value of 0.026) in the joints of the left side. Bilateral symmetry and lack of condyle centralization were common characteristics among all groups. The greatest condylar decentralization was observed in the Class II group, whereas the least condylar decentralization was found in the normal occlusion group.

Why care about linear hair growth rates (LHGR)? a study using in vivo imaging and computer assisted image analysis after manual processing (CAIAMP) in unaffected male controls and men with male pattern hair loss (MPHL).

PubMed

Van Neste, Dominique

2014-01-01

The words "hair growth" frequently encompass many aspects other than just growth. Report on a validation method for precise non-invasive measurement of thickness together with linear hair growth rates of individual hair fibres. To verify the possible correlation between thickness and linear growth rate of scalp hair in male pattern hair loss as compared with healthy male controls. To document the process of validation of hair growth measurement from in vivo image capturing and manual processing, followed by computer assisted image analysis. We analysed 179 paired images obtained with the contrast-enhanced-phototrichogram method with exogen collection (CE-PTG-EC) in 13 healthy male controls and in 87 men with male pattern hair loss (MPHL). There was a global positive correlation between thickness and growth rate (ANOVA; p<0.0001) and a statistically significantly (ANOVA; p<0.0005) slower growth rate in MPHL as compared with equally thick hairs from controls. Finally, the growth rate recorded in the more severe patterns was significantly (ANOVA; P ≤ 0.001) reduced compared with equally thick hair from less severely affected MPHL or controls subjects. Reduced growth rate, together with thinning and shortening of the anagen phase duration in MPHL might contribute together to the global impression of decreased hair volume on the top of the head. Amongst other structural and functional parameters characterizing hair follicle regression, linear hair growth rate warrants further investigation, as it may be relevant in terms of self-perception of hair coverage, quantitative diagnosis and prognostic factor of the therapeutic response.

Therapeutic Efficacy of Orally Delivered Doxorubicin Nanoparticles in Rat Tongue Cancer Induced by 4-Nitroquinoline 1-Oxide.

PubMed

Moradzadeh Khiavi, Monir; Rostami, Ahamd; Hamishekar, Hamed; Mesgari Abassi, Mehran; Aghbali, Amirala; Salehi, Roya; Abdollahi, Bita; Fotoohi, Soheila; Sina, Mahmud

2015-06-01

Oral cancer is one of the most significant cancers in the world, and squamous cell carcinoma makes up about 94% of oral malignancies. The aim of the present study was to compare the efficacy of doxorubicin plus methotrexate - loaded nanoparticles on tongue squamous cell carcinoma induced by 4NQO and compare it with the commercial doxorubicin and methotrexate delivered orally on seventy SD male rats. 70 rats were divided into five groups. During the study, the animals were weighed by a digital scale once a week. Number of mortalities was recorded in the data collection forms. At the end of the treatment, biopsy samples were taken from rat tongues in order to evaluate the severity of dysplasia and the extent of cell proliferation. The results were analyzed using ANOVA, descriptive statistics and chi-square test. No statistically significant difference was found in the mean weight of five groups (p>0.05). No significant relationship was found between groups and mortality rate (P = 0. 39). In addition, there was a significant relationship between groups and the degree of dysplasia (P <0.001). The statistical analysis showed a significant relationship between groups and the rate of cell proliferation (p <0.001). The results of the present study showed that the use of doxorubicin plus methotrexate - loaded nanoparticles orally had more therapeutic effects than commercial doxorubicin plus methotrexate.

Retention of veneered stainless steel crowns on replicated typodont primary incisors: an in vitro study.

PubMed

Guelmann, Marcio; Gehring, Daren F; Turner, Clara

2003-01-01

The purpose of this in vitro study was to determine the effect of crimping and cementation on retention of veneered stainless steel crowns. One hundred twenty crowns, 90 from 3 commercially available brands of veneered stainless steel crowns (Dura Crown, Kinder Krown, and NuSmile Primary Crown) and 30 (plain) Unitek stainless steel crowns were assessed for retention. An orthodontic wire was soldered perpendicular to the incisal edge of the crowns; the crowns were fitted to acrylic replicas of ideal crown preparations and were divided equally into 3 test groups: group 1--crowns were crimped only (no cement used); group 2--crowns were cemented only; and group 3--crowns were crimped and cemented to the acrylic replicas. An Instron machine recorded the amount of force necessary to dislodge the crowns and the results were statistically analyzed using 2-way ANOVA and Tukey honestly significant difference (HSD) test. Group 3 was statistically more retentive than groups 1 and 2. Group 2 was statistically more retentive than group 1 (P < .001). In group 1, Unitek crowns were statistically more retentive than the veneered crowns (P < .05). In group 2, NuSmile crowns showed statistically less retention values than all other crowns (P < .05). In group 3,Kinder Krown crowns showed statistically better retention rates than all other brands (P < .05). Significantly higher retention values were obtained for all brands tested when crimping and cement were combined. The crowns with veneer facings were significantly more retentive than the nonveneered ones when cement and crimping were combined.

Quantitative knowledge acquisition for expert systems

NASA Technical Reports Server (NTRS)

Belkin, Brenda L.; Stengel, Robert F.

1991-01-01

A common problem in the design of expert systems is the definition of rules from data obtained in system operation or simulation. While it is relatively easy to collect data and to log the comments of human operators engaged in experiments, generalizing such information to a set of rules has not previously been a direct task. A statistical method is presented for generating rule bases from numerical data, motivated by an example based on aircraft navigation with multiple sensors. The specific objective is to design an expert system that selects a satisfactory suite of measurements from a dissimilar, redundant set, given an arbitrary navigation geometry and possible sensor failures. The systematic development is described of a Navigation Sensor Management (NSM) Expert System from Kalman Filter convariance data. The method invokes two statistical techniques: Analysis of Variance (ANOVA) and the ID3 Algorithm. The ANOVA technique indicates whether variations of problem parameters give statistically different covariance results, and the ID3 algorithms identifies the relationships between the problem parameters using probabilistic knowledge extracted from a simulation example set. Both are detailed.

Comparison of diffusion-weighted MRI acquisition techniques for normal pancreas at 3.0 Tesla.

PubMed

Yao, Xiu-Zhong; Kuang, Tiantao; Wu, Li; Feng, Hao; Liu, Hao; Cheng, Wei-Zhong; Rao, Sheng-Xiang; Wang, He; Zeng, Meng-Su

2014-01-01

We aimed to optimize diffusion-weighted imaging (DWI) acquisitions for normal pancreas at 3.0 Tesla. Thirty healthy volunteers were examined using four DWI acquisition techniques with b values of 0 and 600 s/mm2 at 3.0 Tesla, including breath-hold DWI, respiratory-triggered DWI, respiratory-triggered DWI with inversion recovery (IR), and free-breathing DWI with IR. Artifacts, signal-to-noise ratio (SNR) and apparent diffusion coefficient (ADC) of normal pancreas were statistically evaluated among different DWI acquisitions. Statistical differences were noticed in artifacts, SNR, and ADC values of normal pancreas among different DWI acquisitions by ANOVA (P <0.001). Normal pancreas imaging had the lowest artifact in respiratory-triggered DWI with IR, the highest SNR in respiratory-triggered DWI, and the highest ADC value in free-breathing DWI with IR. The head, body, and tail of normal pancreas had statistically different ADC values on each DWI acquisition by ANOVA (P < 0.05). The highest image quality for normal pancreas was obtained using respiratory-triggered DWI with IR. Normal pancreas displayed inhomogeneous ADC values along the head, body, and tail structures.

Salivary protein concentration, flow rate, buffer capacity and pH estimation: A comparative study among young and elderly subjects, both normal and with gingivitis and periodontitis.

PubMed

Shaila, Mulki; Pai, G Prakash; Shetty, Pushparaj

2013-01-01

To evaluate the salivary protein concentration in gingivitis and periodontitis patients and compare the parameters like salivary total protein, salivary albumin, salivary flow rate, pH, buffer capacity and flow rate in both young and elderly patients with simple methods. One hundred and twenty subjects were grouped based on their age as young and elderly. Each group was subgrouped (20 subjects) as controls, gingivitis and periodontitis. Unstimulated whole saliva was collected from patients and flow rate was noted down during collection of the sample. Salivary protein estimation was done using the Biuret method and salivary albumin was assessed using the Bromocresol green method. pH was estimated with a pHmeter and buffering capacity was analyzed with the titration method. Student's t-test, Fisher's test (ANOVA) and Tukey HSD (ANOVA) tests were used for statistical analysis. A very highly significant rise in the salivary total protein and albumin concentration was noted in gingivitis and periodontitis subjects of both young and elderly. An overall decrease in salivary flow rate was observed among the elderly, and also the salivary flow rate of women was significantly lower than that of men. Significant associations between salivary total protein and albumin in gingivitis and periodontitis were found with simple biochemical tests. A decrease in salivary flow rate among elderly and among women was noted.

Inactivation disinfection property of Moringa Oleifera seed extract: optimization and kinetic studies

NASA Astrophysics Data System (ADS)

Idris, M. A.; Jami, M. S.; Hammed, A. M.

2017-05-01

This paper presents the statistical optimization study of disinfection inactivation parameters of defatted Moringa oleifera seed extract on Pseudomonas aeruginosa bacterial cells. Three level factorial design was used to estimate the optimum range and the kinetics of the inactivation process was also carried. The inactivation process involved comparing different disinfection models of Chicks-Watson, Collins-Selleck and Homs models. The results from analysis of variance (ANOVA) of the statistical optimization process revealed that only contact time was significant. The optimum disinfection range of the seed extract was 125 mg/L, 30 minutes and 120rpm agitation. At the optimum dose, the inactivation kinetics followed the Collin-Selleck model with coefficient of determination (R2) of 0.6320. This study is the first of its kind in determining the inactivation kinetics of pseudomonas aeruginosa using the defatted seed extract.

Exercise and Bone Mineral Density in Premenopausal Women: A Meta-Analysis of Randomized Controlled Trials

PubMed Central

Kelley, George A.; Kelley, Kristi S.; Kohrt, Wendy M.

2013-01-01

Objective. Examine the effects of exercise on femoral neck (FN) and lumbar spine (LS) bone mineral density (BMD) in premenopausal women. Methods. Meta-analysis of randomized controlled exercise trials ≥24 weeks in premenopausal women. Standardized effect sizes (g) were calculated for each result and pooled using random-effects models, Z score alpha values, 95% confidence intervals (CIs), and number needed to treat (NNT). Heterogeneity was examined using Q and I 2. Moderator and predictor analyses using mixed-effects ANOVA and simple metaregression were conducted. Statistical significance was set at P ≤ 0.05. Results. Statistically significant improvements were found for both FN (7g's, 466 participants, g = 0.342, 95%  CI = 0.132, 0.553, P = 0.001, Q = 10.8, P = 0.22, I 2 = 25.7%, NNT = 5) and LS (6g's, 402 participants, g = 0.201, 95%  CI = 0.009, 0.394, P = 0.04, Q = 3.3, P = 0.65, I 2 = 0%, NNT = 9) BMD. A trend for greater benefits in FN BMD was observed for studies published in countries other than the United States and for those who participated in home versus facility-based exercise. Statistically significant, or a trend for statistically significant, associations were observed for 7 different moderators and predictors, 6 for FN BMD and 1 for LS BMD. Conclusions. Exercise benefits FN and LS BMD in premenopausal women. The observed moderators and predictors deserve further investigation in well-designed randomized controlled trials. PMID:23401684

Exercise and bone mineral density in premenopausal women: a meta-analysis of randomized controlled trials.

PubMed

Kelley, George A; Kelley, Kristi S; Kohrt, Wendy M

2013-01-01

Objective. Examine the effects of exercise on femoral neck (FN) and lumbar spine (LS) bone mineral density (BMD) in premenopausal women. Methods. Meta-analysis of randomized controlled exercise trials ≥24 weeks in premenopausal women. Standardized effect sizes (g) were calculated for each result and pooled using random-effects models, Z score alpha values, 95% confidence intervals (CIs), and number needed to treat (NNT). Heterogeneity was examined using Q and I(2). Moderator and predictor analyses using mixed-effects ANOVA and simple metaregression were conducted. Statistical significance was set at P ≤ 0.05. Results. Statistically significant improvements were found for both FN (7g's, 466 participants, g = 0.342, 95%  CI = 0.132, 0.553, P = 0.001, Q = 10.8, P = 0.22, I(2) = 25.7%, NNT = 5) and LS (6g's, 402 participants, g = 0.201, 95%  CI = 0.009, 0.394, P = 0.04, Q = 3.3, P = 0.65, I(2) = 0%, NNT = 9) BMD. A trend for greater benefits in FN BMD was observed for studies published in countries other than the United States and for those who participated in home versus facility-based exercise. Statistically significant, or a trend for statistically significant, associations were observed for 7 different moderators and predictors, 6 for FN BMD and 1 for LS BMD. Conclusions. Exercise benefits FN and LS BMD in premenopausal women. The observed moderators and predictors deserve further investigation in well-designed randomized controlled trials.

The ability of different materials to reproduce accurate records of interocclusal relationships in the vertical dimension.

PubMed

Ghazal, M; Albashaireh, Z S; Kern, M

2008-11-01

Restorations made on incorrectly mounted casts might require considerable intra-oral adjustments to correct the occlusion or might even necessitate a remake of the restoration. The aim of this study was to evaluate interocclusal recording materials for their ability to reproduce accurate vertical interocclusal relationships after a storage time of 1 and 48 h, respectively. A custom-made apparatus was used to simulate the maxilla and mandible. Eight interocclusal records were made in each of the following groups: G1: Aluwax (aluminium wax), G2: Beauty Pink wax (hydrocarbon wax compound), G3: Futar D, G4: Futar D Fast, G5: Futar Scan (G3-G5: vinyl polysiloxane), G6: Ramitec (polyether). The vertical discrepancies were measured by an inductive displacement transducer connected to a carrier frequency amplifier after storage of the records for two periods of 1 and 48 h. Two-way anova was used for statistical analysis. The mean vertical discrepancies in mum (1/48 h) for G1 (31/35) and G2 (35/38) were statistically significantly higher than for the other groups G3 (8/10), G4 (11/12), G5 (6/8) and G6 (5/8) (P < or = 0.05). There were no statistically significant differences between the elastomers tested. The effect of storage on the vertical discrepancies was statistically significant (P < 0.001). Vinyl polysiloxane and polyether interocclusal records can be used to relate working casts during mounting procedures without significant vertical displacement of the casts.

Coping, stress, and personality in Spanish nursing students: A longitudinal study.

PubMed

Fornés-Vives, Joana; Garcia-Banda, Gloria; Frias-Navarro, Dolores; Rosales-Viladrich, Gerard

2016-01-01

The purpose of this study was to examine the dominant stress coping style in nursing students, its relationships with stressful life events and personality traits, and the students' changes during their academic training. A non-experimental two-wave longitudinal design was carried out in 199 nursing students recruited from three Spanish nursing schools. The Stressful Life Events Scale, NEO-FFI, and COPE questionnaire were administered at the beginning (T1) and end (T2) of their nursing studies. Descriptive statistics, Anova(s), NPar tests, and Pearson correlations were carried out. Results show that nursing students' dominant coping style was emotion-focused coping, both at T1 and T2. Highly significant correlations between emotional coping and the neuroticism trait were found. Coping, stress, and personality changed positively during the training program. At T2, the use of problem-focused strategies increased, and participants became more extroverted, agreeable, and conscientious. Coping and personality changes experienced by nursing students throughout their degree program seem to mirror the professional competences needed by future licensed nurses. Copyright © 2015 Elsevier Ltd. All rights reserved.

The High Cost of Complexity in Experimental Design and Data Analysis: Type I and Type II Error Rates in Multiway ANOVA.

ERIC Educational Resources Information Center

Smith, Rachel A.; Levine, Timothy R.; Lachlan, Kenneth A.; Fediuk, Thomas A.

2002-01-01

Notes that the availability of statistical software packages has led to a sharp increase in use of complex research designs and complex statistical analyses in communication research. Reports a series of Monte Carlo simulations which demonstrate that this complexity may come at a heavier cost than many communication researchers realize. Warns…

Estimation and correlation of salivary thiocyanate levels in periodontally healthy subjects, smokers, nonsmokers, and gutka-chewers with chronic periodontitis.

PubMed

Hegde, Shashikanth; Chatterjee, Elashri; Rajesh, K S; Kumar, M S Arun

2016-01-01

This study was conducted to estimate and correlate salivary thiocyanate (SCN) levels in periodontally healthy subjects, smokers, nonsmokers, and gutka-chewers with chronic periodontitis. The study population consisted of 40 systemically healthy subjects in the age group of 18-55 years that was further divided into four groups: Control, smokers, nonsmokers, and gutka-chewers with chronic periodontitis. Gingival index (GI) (Loe and Silness-1963), probing depth (PD), clinical attachment loss was assessed. Estimation of SCN was performed by ultraviolet spectrophotometer at 447 nm wavelength. Statistical analysis was performed using the one-way ANOVAs Welch test and Pearson's correlation test using SPSS version 17 software. Results showed statistically significant increase in SCN levels in smokers as compared to gutka-chewers with chronic periodontitis, control, and nonsmokers with chronic periodontitis subjects. Significantly higher PD and loss of attachment were seen in smokers group compared with other groups. A negative correlation observed between the GI and thiocyanate levels. The present study revealed a significant increase in SCN levels in smokers with periodontitis as compared to nonsmokers.

Caffeine modifies blood glucose availability during prolonged low-intensity exercise in individuals with type-2 diabetes

PubMed Central

da Silva, Luiz Augusto; de Freitas, Leandro; Medeiros, Thiago Emannuel; Osiecki, Raul; Garcia Michel, Renan; Snak, André Luiz

2014-01-01

Objective: The study investigated the effect of supplementation with maltodextrin (CHO) alone or associated to caffeine during exercise in T2DM subjects. Methods: Pilot study, using eight subjects with T2DM, aged 55±10 years, received CHO (1 g/kg) or caffeine (1.5 mg/kg) alone or associated before exercise protocol. The exercise was executed at 40% heart rate (HR) reserve for 40 min, with 10-min recovery. Blood pressure (BP) and perceived exertion scale (Borg) were checked every 2 min. Blood glucose (BG) was checked every 10 min. For statistical analysis, ANOVA test was used and the value was considered statistically significant at p <0.05. Results: The results showed that BP and HR did not change significantly among all treatments. Caffeine promoted a significant reduction in BG of 75 mg/dL (65%, p <0.05) during 40 min of exercise protocol compared to all groups. Conclusion: Supplementation with 1.5 mg/kg of caffeine reduces BG concentration during prolonged exercise in T2DM patients. PMID:25100892

Statistical methods for detecting and comparing periodic data and their application to the nycthemeral rhythm of bodily harm: A population based study

PubMed Central

2010-01-01

Background Animals, including humans, exhibit a variety of biological rhythms. This article describes a method for the detection and simultaneous comparison of multiple nycthemeral rhythms. Methods A statistical method for detecting periodic patterns in time-related data via harmonic regression is described. The method is particularly capable of detecting nycthemeral rhythms in medical data. Additionally a method for simultaneously comparing two or more periodic patterns is described, which derives from the analysis of variance (ANOVA). This method statistically confirms or rejects equality of periodic patterns. Mathematical descriptions of the detecting method and the comparing method are displayed. Results Nycthemeral rhythms of incidents of bodily harm in Middle Franconia are analyzed in order to demonstrate both methods. Every day of the week showed a significant nycthemeral rhythm of bodily harm. These seven patterns of the week were compared to each other revealing only two different nycthemeral rhythms, one for Friday and Saturday and one for the other weekdays. PMID:21059197

Statistical Analysis of Human Body Movement and Group Interactions in Response to Music

NASA Astrophysics Data System (ADS)

Desmet, Frank; Leman, Marc; Lesaffre, Micheline; de Bruyn, Leen

Quantification of time series that relate to physiological data is challenging for empirical music research. Up to now, most studies have focused on time-dependent responses of individual subjects in controlled environments. However, little is known about time-dependent responses of between-subject interactions in an ecological context. This paper provides new findings on the statistical analysis of group synchronicity in response to musical stimuli. Different statistical techniques were applied to time-dependent data obtained from an experiment on embodied listening in individual and group settings. Analysis of inter group synchronicity are described. Dynamic Time Warping (DTW) and Cross Correlation Function (CCF) were found to be valid methods to estimate group coherence of the resulting movements. It was found that synchronicity of movements between individuals (human-human interactions) increases significantly in the social context. Moreover, Analysis of Variance (ANOVA) revealed that the type of music is the predominant factor in both the individual and the social context.

Terrestrial gamma radiation dose (TGRD) levels in northern zone of Jos Plateau, Nigeria: Statistical relationship between dose rates and geological formations

NASA Astrophysics Data System (ADS)

Abba, Habu Tela; Hassan, Wan Muhamad Saridan Wan; Saleh, Muneer Aziz; Aliyu, Abubakar Sadiq; Ramli, Ahmad Termizi

2017-11-01

In- situ measurement of terrestrial gamma radiation dose rates (TGRD) was conducted in northern zone of Jos Plateau and a statistical relationship between the TGRD and the underlying geological formations was investigated. The TGRD rates in all the measurements ranged from 40 to 1265 nGy h-1 with a mean value of 250 nGy h-1. The maximum TGDR was recorded on geological type G8 (Younger Granites) at Bisitchi, and the lowest TGDR was recorded on G6 (Basaltic rocks) at Gabia. One way analysis of variance (ANOVA) statistical test was used to compared the data. Significantly, the results of this study inferred a strong relationship between TGRD levels with geological structures of a place. An isodose map was plotted to represent exposure rates due to TGRD. The results of this investigation could be useful for multiple public interest such as evaluating public dose for the area.

Assessing the Relationship between Airlines' Maintenance Outsourcing and Aviation Professionals' Job Satisfaction

NASA Astrophysics Data System (ADS)

McCamey, Rotorua

The current economic and security challenges placed an additional burden on U.S. airlines to provide optimum service at reasonable costs to the flying public. In efforts to stay competitive, U.S. airlines increased foreign-based outsourcing of aircraft major repair and overhaul (MRO) mainly to reduce labor costs and conserve capital. This concentrated focus on outsourcing and restructuring, ignored job dissatisfaction among remaining employees which could reduce and or eliminate an airline's competitiveness. The purpose of this quantitative study was (a) to assess the relationship between increased levels of foreign-based MRO outsourcing and aviation professionals' job satisfaction (Y1); (b) to assess the influence of increased levels of foreign-based outsourcing on MRO control (Y2), MRO error rate (Y3), and MRO technical punctuality (Y4) as perceived by aviation professionals; and (c) to assess the influence of increased levels of foreign-based MRO outsourcing on technical skills (Y5) and morale ( Y6) as perceived by aviation professionals. The survey instrument was utilized based on Paul Spector's Job Satisfaction Questionnaire and MRO specific questions. A random sample of 300 U.S. airline participants was requested via MarketTools to meet required sample size of 110 as determined through a priori power analysis. Study data rendered 198 useable surveys of 213 total responses, and correlation, multiple regression, and ANOVA methods were used to test study hypotheses. The Spearman's rho for (Y 1) was statistically significant, p = .010 and multiple regression was statistically significant, p < .001. A one-way ANOVA indicated participants differed in their opinions of (Y2) through (Y6), Recommendations for future research include contrasting domestic and global MRO providers, and examining global aircraft parts suppliers and aviation technical training.

Predoctoral and postdoctoral students' perspectives about pediatric dental behavior guidance.

PubMed

Bimstein, Enrique; Azari, Amir F; Riley, Joseph L

2011-05-01

This study compared acceptability scores of pediatric dental behavior guidance between predoctoral senior dental students and postdoctoral pediatric dentistry graduates. The scores were obtained with an anonymous survey that included twenty-five items related to behavior guidance techniques or situations, with the degree of acceptability of each being marked on a visual analog scale. Demographic data collected included year of graduation from the postdoctoral program, type of employment, being board-certified or not, gender, marital and parental status, previously receiving dental or medical treatment, and degree of unpleasantness from these treatments. Thirty-nine predoctoral and fifty-one postdoctoral surveys were compared. Analysis of variance (ANOVA) indicated that the predoctoral acceptability scores were statistically significantly higher than the postdoctoral scores for not allowing the child to speak during treatment, voice control, hand over mouth, active immobilization, and providing an exact explanation to the child. The predoctoral scores were lower than the postdoctoral scores for not using local anesthetic when the child does not want it, parent's presence in the operatory during treatment, or talking with the dentist during treatment. ANOVA of the predoctoral and postdoctoral scores combined indicated statistically significant differences between scores from male and females respondents for parent talking with the dentist during treatment; between married and not married respondents for hand over mouth, encouraging the child not to be a coward, the child being allowed to stop the treatment, and the parent being in the operatory during treatment; and between parents and not parents respondents for child not allowed to speak during the treatment, voice control, and hand over mouth. This study found that perspectives about pediatric dental behavior guidance are influenced by pre- and postdoctoral education and postgraduate experience.

Clinical Performance of Viscous Glass Ionomer Cement in Posterior Cavities over Two Years

PubMed Central

Frankenberger, Roland; Garcia-Godoy, Franklin; Krämer, Norbert

2009-01-01

In this controlled prospective clinical study the highly viscous glass ionomer cement Ketac Molar was clinically assessed in Class I and Class II cavities. Forty-nine subjects (mean age 32.3 years) received 108 restorations placed by six operators in conventional Black I and II type cavities with undercuts after excavating primary lesions or after removing insufficient restorations. At baseline, and after 6, 12, and 24 months, restorations were assessed by two independent investigators according to modified USPHS codes and criteria. Impressions of the restorations were taken and epoxy replicas were made. Between the baseline and the 24-month recall, 51 representative samples were analyzed at 130 × magnification by use of a stereo light microscope (SLM). Recall rates were 83% after 6 months, 50% after 12 months, and 24% after 24 months. Failure rates after 24 months were 8% for Class I and 40% for Class II fillings, mainly due to bulk fracture at occlusally loaded areas (Kaplan Meier survival analysis). Significant changes over time were found for the criteria “surface roughness”, “marginal integrity”, “restoration integrity”, and “overall judgement” (P < .05; Friedman test). SLM analysis revealed statistically significant differences for the following criteria over time (baseline/6 months/12 months (in % of entire evaluable margin length); P < .05; Friedman 2-way ANOVA): perfect margin 37/19/11, negative step formation 26/49/57, gap formation 2/7/9, and overhang 24/11/8. Replicas exhibited mainly negative step formation as main finding due to apparently inferior wear resistance (P < .05). Gap formations were more frequently observed in Class II restorations than in Class I (12% versus 3% after 12 months; P < .05, Mann-Whitney-U test). The evaluated margin lengths were not statistically different (P > .05, Friedman 2-way ANOVA). PMID:20339470

Primary implant stability in a bone model simulating clinical situations for the posterior maxilla: an in vitro study

PubMed Central

2016-01-01

Purpose The aim of this study was to determine the influence of anatomical conditions on primary stability in the models simulating posterior maxilla. Methods Polyurethane blocks were designed to simulate monocortical (M) and bicortical (B) conditions. Each condition had four subgroups measuring 3 mm (M3, B3), 5 mm (M5, B5), 8 mm (M8, B8), and 12 mm (M12, B12) in residual bone height (RBH). After implant placement, the implant stability quotient (ISQ), Periotest value (PTV), insertion torque (IT), and reverse torque (RT) were measured. Two-factor ANOVA (two cortical conditions×four RBHs) and additional analyses for simple main effects were performed. Results A significant interaction between cortical condition and RBH was demonstrated for all methods measuring stability with two-factor ANOVA. In the analyses for simple main effects, ISQ and PTV were statistically higher in the bicortical groups than the corresponding monocortical groups, respectively. In the monocortical group, ISQ and PTV showed a statistically significant rise with increasing RBH. Measurements of IT and RT showed a similar tendency, measuring highest in the M3 group, followed by the M8, the M5, and the M12 groups. In the bicortical group, all variables showed a similar tendency, with different degrees of rise and decline. The B8 group showed the highest values, followed by the B12, the B5, and the B3 groups. The highest coefficient was demonstrated between ISQ and PTV. Conclusions Primary stability was enhanced by the presence of bicortex and increased RBH, which may be better demonstrated by ISQ and PTV than by IT and RT. PMID:27588215

Influence of hydrostatic pulpal pressure on the microtensile bond strength of all-in-one self-etching adhesives.

PubMed

Hosaka, Keiichi; Nakajima, Masatoshi; Monticelli, Francesca; Carrilho, Marcela; Yamauti, Monica; Aksornmuang, Juthatip; Nishitani, Yoshihiro; Tay, Franklin R; Pashley, David H; Tagami, Junji

2007-10-01

To evaluate the microtensile bond strength (microTBS) of two all-in-one self-etching adhesive systems and two self-etching adhesives with and without simulated hydrostatic pulpal pressure (PP). Flat coronal dentin surfaces of extracted human molars were prepared. Two all-in-one self-etching adhesive systems, One-Up Bond F (OBF; Tokuyama) and Clearfil S3 Bond (Tri-S, Kuraray Medical) and two self-etching primer adhesives, Clearfil Protect Bond (PB; Kuraray) and Clearfil SE Bond (SE; Kuraray) were applied to the dentin surfaces according to manufacturers' instructions under either a pulpal pressure (PP) of zero or 15 cm H2O. A hybrid resin composite (Clearfil AP-X, Kuraray) was used for the coronal buildup. Specimens bonded under PP were stored in water at 37 degrees C under 15 cm H2O for 24 h. Specimens not bonded under PP were stored under a PP of zero. After storage, the bonded specimens were sectioned into slabs that were trimmed to hourglass-shaped specimens, and were subjected to microtensile bond testing (microTBS). The bond strength data were statistically analyzed using two-way ANOVA and the Holm-Sidak method for multiple comparison tests (alpha = 0.05). The surface area percentage of different failure modes for each material was also statistically analyzed with three one-way ANOVAs and Tukey's multiple comparison tests. The microTBS of OBF and Tri-S fell significantly under PP. However, in the, PB and SE bonded specimens under PP, there were no significant differences compared with the control groups without PP. The microTBS of the two all-in-one adhesive systems decreased when PP was applied. However, the microTBS of both self-etching primer adhesives did not decrease under PP.

Volume analysis of heat-induced cracks in human molars: A preliminary study

PubMed Central

Sandholzer, Michael A.; Baron, Katharina; Heimel, Patrick; Metscher, Brian D.

2014-01-01

Context: Only a few methods have been published dealing with the visualization of heat-induced cracks inside bones and teeth. Aims: As a novel approach this study used nondestructive X-ray microtomography (micro-CT) for volume analysis of heat-induced cracks to observe the reaction of human molars to various levels of thermal stress. Materials and Methods: Eighteen clinically extracted third molars were rehydrated and burned under controlled temperatures (400, 650, and 800°C) using an electric furnace adjusted with a 25°C increase/min. The subsequent high-resolution scans (voxel-size 17.7 μm) were made with a compact micro-CT scanner (SkyScan 1174). In total, 14 scans were automatically segmented with Definiens XD Developer 1.2 and three-dimensional (3D) models were computed with Visage Imaging Amira 5.2.2. The results of the automated segmentation were analyzed with an analysis of variance (ANOVA) and uncorrected post hoc least significant difference (LSD) tests using Statistical Package for Social Sciences (SPSS) 17. A probability level of P < 0.05 was used as an index of statistical significance. Results: A temperature-dependent increase of heat-induced cracks was observed between the three temperature groups (P < 0.05, ANOVA post hoc LSD). In addition, the distributions and shape of the heat-induced changes could be classified using the computed 3D models. Conclusion: The macroscopic heat-induced changes observed in this preliminary study correspond with previous observations of unrestored human teeth, yet the current observations also take into account the entire microscopic 3D expansions of heat-induced cracks within the dental hard tissues. Using the same experimental conditions proposed in the literature, this study confirms previous results, adds new observations, and offers new perspectives in the investigation of forensic evidence. PMID:25125923

Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials

PubMed Central

Güngör, Merve Bankoğlu; Bal, Bilge Turhan; Ünver, Senem; Doğan, Aylin

2016-01-01

PURPOSE The purpose of this study was to assess the effect of surface treatments on shear bond strength of resin composite bonded to thermocycled and non-thermocycled CAD/CAM resin-ceramic hybrid materials. MATERIALS AND METHODS 120 specimens (10×10×2 mm) from each material were divided into 12 groups according to different surface treatments in combination with thermal aging procedures. Surface treatment methods were airborne-particle abrasion (abraded with 50 micron alumina particles), dry grinding (grinded with 125 µm grain size bur), and hydrofluoric acid (9%) and silane application. According to the thermocycling procedure, the groups were assigned as non-thermocycled, thermocycled after packing composites, and thermocycled before packing composites. The average surface roughness of the non-thermocycled specimens were measured after surface treatments. After packing composites and thermocycling procedures, shear bond strength (SBS) of the specimens were tested. The results of surface roughness were statistically analyzed by 2-way Analysis of Variance (ANOVA), and SBS results were statistically analyzed by 3-way ANOVA. RESULTS Surface roughness of GC were significantly lower than that of LU and VE (P<.05). The highest surface roughness was observed for dry grinding group, followed by airborne particle abraded group (P<.05). Comparing the materials within the same surface treatment method revealed that untreated surfaces generally showed lower SBS values. The values of untreated LU specimens showed significantly different SBS values compared to those of other surface treatment groups (P<.05). CONCLUSION SBS was affected by surface treatments. Thermocycling did not have any effect on the SBS of the materials except acid and silane applied GC specimens, which were subjected to thermocycling before packing of the composite resin. PMID:27555894

The Effect of Different Chemical Surface Treatments of Denture Teeth on Shear Bond Strength: A Comparative Study

PubMed Central

Palekar, Umesh; Awinashe, Vaibav; Mishra, Sunil Kumar; Kawadkar, Abhishek; Rahangdale, Tripti

2014-01-01

Background: The development of better cross linked acrylic resin teeth has solved the problems related to wearing and discoloration of acrylic teeth. The same cross linking at ridge lap region acts as a double edge sword as it weakens the bond between denture base and tooth. Aim of Study: The purpose of study was to evaluate the effect of surface treatment on the bond strength of resin teeth to denture base resin using monomethyl methacrylate monomer and dichloromethane with no surface treatment acting as control. Settings and Design:Denture base cylinder samples in wax (n=180) were made with maxillary central incisor attached at 450 (JIST 6506). These samples were randomly and equally divided into three groups of 60 each. These specimens were then flasked, dewaxed as per the standard protocol. Materials and Methods: Before acrylization, ridge lap area was treated as follows: Group A- no surface treatment act as control, Group B treated with monomethyl methacrylate monomer, Group C treated with dichloromethane. Digitally controlled acryliser was used for acrylization as per manufacturer’s instructions and shear bond strength was tested on Universal Testing Machine (Servo Hydraulic, 50kN High Strain, BISS Research). Statistical Analysis used: Result was statistically analyzed with One-way analysis of variance (ANOVA) and Post-hoc ANOVA Tukey’s HSD test at 5% level of significance. Results: The application of dichloromethane showed increased bond strength between cross linked acrylic resin teeth and heat cure denture base resin followed by monomethyl methacrylate monomer and control group. Conclusion: The application of dichloromethane on the ridge lap surface of the resin teeth before packing of the dough into the mold significantly increased the bond strength between cross linked acrylic resin teeth and heat cure denture base resin. PMID:25121057

Characterization of Italian honeys (Marche Region) on the basis of their mineral content and some typical quality parameters

PubMed Central

Conti, Marcelo Enrique; Stripeikis, Jorge; Campanella, Luigi; Cucina, Domenico; Tudino, Mabel Beatriz

2007-01-01

Background The characterization of three types of Marche (Italy) honeys (Acacia, Multifloral, Honeydew) was carried out on the basis of the their quality parameters (pH, sugar content, humidity) and mineral content (Na, K, Ca, Mg, Cu, Fe, and Mn). Pattern recognition methods such as principal components analysis (PCA) and linear discriminant analysis (LDA) were performed in order to classify honey samples whose botanical origins were different, and identify the most discriminant parameters. Lastly, using ANOVA and correlations for all parameters, significant differences between diverse types of honey were examined. Results Most of the samples' water content showed good maturity (98%) whilst pH values were in the range 3.50 – 4.21 confirming the good quality of the honeys analysed. Potassium was quantitatively the most relevant mineral (mean = 643 ppm), accounting for 79% of the total mineral content. The Ca, Na and Mg contents account for 14, 3 and 3% of the total mineral content respectively, while other minerals (Cu, Mn, Fe) were present at very low levels. PCA explained 75% or more of the variance with the first two PC variables. The variables with higher discrimination power according to the multivariate statistical procedure were Mg and pH. On the other hand, all samples of acacia and honeydew, and more than 90% of samples of multifloral type have been correctly classified using the LDA. ANOVA shows significant differences between diverse floral origins for all variables except sugar, moisture and Fe. Conclusion In general, the analytical results obtained for the Marche honeys indicate the products' high quality. The determination of physicochemical parameters and mineral content in combination with modern statistical techniques can be a useful tool for honey classification. PMID:17880749

Study of the Impact of Educational Behavioral Interventions on Fatigue in Mothers in the Postpartum Period in the Groups of Face-to-Face and Electronic Training

PubMed Central

Gholami, Zahra; Mohammadirizi, Soheila; Bahadoran, Parvin

2017-01-01

Background: Maternal fatigue in the postpartum period include factors that affect the quality of life and health of both the mother and newborn. This study aimed to investigate two educational approaches regarding mother's fatigue in the postpartum period. Materials and Methods: This experimental study was performed among 110 pregnant mothers during their postpartum care using random sampling. The participants were divided in three groups, namely, face-to-face, e-learning, and control groups. Interventions included individual meetings between the researcher and mothers in the face-to-face group and giving educational compact disc to the e-learning department to improve maternal fatigue. Personal information and fertility data was obtained (before training); the maternal fatigue questionnaire Fatigue Severity Scale (FSS) was completed before and after any type of (face-to-face, e-learning, and control) education. Obtained data were analyzed using one-way analysis of variance (ANOVA) and repeated-measures ANOVA. Results: Results showed that both face-to-face and e-learning methods had similar maternal fatigue scores. The average change on the maternal fatigue score in the second treatment was (p = 0.02) and the third treatment was (p < 0.001)among three groups that was indicative of significant statistical differences. Similarly, there was no statistically significant difference in the average maternal fatigue score between the two groups before the intervention and in the second and third groups after the intervention. Therefore, over time, the training was unaffected. Conclusions: The findings of this study indicate that both face-to-face and e-learning methods are effective to reduce maternal postpartum fatigue. PMID:29184586

Comparison of the Delay in Processing Time and Protective Plastic Cases in Two Phosphor Plate Systems

PubMed Central

Aktan, Ali Murat; Çiftçi, Mehmet Ertuğrul; Akgünlü, Faruk

2012-01-01

Objective. The purpose of this study was to analyze two phosphor plate systems (PSPs) (Dürr Dental, Digora Optime) according to their scanning delay and protective plastic case performances. Methods. Two PSPs using an aluminum step wedge were exposed. These plates were placed in three different protective plastic cases (manufacturers' original cases, black case, and white case) before obtaining the radiographs and were then processed immediately and 1, 5, 10, 30, 60, 120, 240, and 480 min after exposure. Mean gray values (MGVs) of the 3rd, 5th, 7th, and 9th steps of the wedges were compared using ANOVA. Results. Statistically significant differences were found between the two PSPs (P < 0.001). ANOVA revealed that the MGVs of four steps of the wedges were significantly different from each other for all scan delays (P < 0.001). MGVs increased with increasing scanning delay, except the group with Dürr plates in their original cases. Reduction in image quality began 5 min after exposure in the other Dürr plate groups. Conclusions. Within the limitations of the current study, it can be concluded that scanning delay causes a reduction in image quality, and using the manufacturer's original protective case will result in better performance of PSPs. PMID:23213301

Mentum deformities in Chironomidae communities as indicators of anthropogenic impacts in Swartkops River

NASA Astrophysics Data System (ADS)

Odume, O. N.; Muller, W. J.; Palmer, C. G.; Arimoro, F. O.

Swartkops River is located in Eastern Cape of South Africa and drains a heavily industrialised catchment and has suffered deterioration in water quality due to pollution. Water quality impairment in the Swartkops River has impacted on its biota. Deformities in the mouth parts of larval Chironomidae, particularly of the mentum, represent sub-lethal effects of exposure to pollutants, and were therefore employed as indictors of pollution in the Swartkops River. Chironomid larvae were collected using the South African Scoring System version 5 (SASS5) protocol. A total of 4838 larvae, representing 26 taxa from four sampling sites during four seasons were screened for mentum deformities. The community incidences of mentum deformity were consistently higher than 8% at Sites 2-4, indicating pollution stress in the river. Analysis of variance (ANOVA) conducted on arcsine transformed data revealed that the mean community incidence of mentum deformity was significantly higher (p < 0.05) at Site 3. ANOVA did not reveal statistically significant differences (p > 0.05) between seasons across sites. Severe deformities were consistently higher at Site 3. Strong correlations were found between deformity indices and the concentrations of dissolved oxygen (DO), total inorganic nitrogen (TIN), orthophosphate-phosphorus (PO4-P), electrical conductivity (EC) and turbidity.

Effectiveness of Massage Therapy and Abdominal Hypopressive Gymnastics in Nonspecific Chronic Low Back Pain: A Randomized Controlled Pilot Study

PubMed Central

Jiménez-Rejano, J. J.; Chillón-Martínez, R.; Gómez-Benítez, M. A.; De-La-Casa-Almeida, M.

2018-01-01

Background There are a great number of interventions in physiotherapy, but with little evidence of their effectiveness in chronic low back pain. Therefore, this study assesses effectiveness of Massage Therapy and Abdominal Hypopressive Gymnastics and the combination of both to decrease pain and lumbar disability while increasing joint mobility and quality of life in patients with chronic nonspecific low back pain. Methods A randomized, single-blinded, controlled, clinical trial with sample (n = 27) was comprised of patients between 20 and 65 years, diagnosed with pain of mechanical origin characterized by having a duration of at least 12 weeks and no serious complications. Each group received 8 interventions of 30 minutes. Results Friedman ANOVA test obtained statistically significant differences of Oswestry, NRS, and Schober variables (p < 0.05) in the three measurements (pretest, posttest 1, and posttest 2), in each individual group. ANOVA Kruskal-Wallis test was used for comparison between groups, and Oswestry Disability values were significantly higher (p = 0.024) in the group receiving both treatments. Conclusion Both individual groups reduce pain levels, improve disability, and increase the flexibility of the lumbar spine. The combination therapy provides greater benefits in terms of lumbar disability. This study is registered on March 8, 2016, with NCT02721914. PMID:29681973

Syllabic patterns in typical and atypical phonological development: ultrasonographic analysis.

PubMed

Vassoler, Aline Mara de Oliveira; Berti, Larissa Cristina

2018-01-01

Objective The present study aims to compare the production of syllabic patterns of the CVC and CV types performed by Brazilian children with typical and atypical phonological development through ultrasonography of tongue. Methods Ten children (five with typical and with five atypical phonological development) recorded nine pairs of words from the syllables: CCV and CV. The images and audios were captured simultaneously by the Articulate Assistant Advanced software. The data were submitted to perceptive analysis and ultrasonographic articulatory analysis (the area between the tip and the blade of the tongue). The area measurements were submitted to one-way repeated measures ANOVA. Results ANOVA demonstrated a significant effect for the clinical condition (typical and atypical), (F (1.8) = 172.48, p> 0.000) forthe area measurements. In both syllabic patterns (CCV and CV) the atypical children showed greater values ​​of the area between the tip and the blade of the tongue. Regarding the syllabic patterns analyzed, the statistical test showed no significant effect (F (1.8)=0.19, p>0.658). Conclusion The use of a greater area of ​​the tongue by children with atypical phonological development suggests the non-differentiation of the tip and the anterior body gestures of the tongue in the production of CV and CCV.

Effectiveness of Massage Therapy and Abdominal Hypopressive Gymnastics in Nonspecific Chronic Low Back Pain: A Randomized Controlled Pilot Study.

PubMed

Bellido-Fernández, L; Jiménez-Rejano, J J; Chillón-Martínez, R; Gómez-Benítez, M A; De-La-Casa-Almeida, M; Rebollo-Salas, M

2018-01-01

There are a great number of interventions in physiotherapy, but with little evidence of their effectiveness in chronic low back pain. Therefore, this study assesses effectiveness of Massage Therapy and Abdominal Hypopressive Gymnastics and the combination of both to decrease pain and lumbar disability while increasing joint mobility and quality of life in patients with chronic nonspecific low back pain. A randomized, single-blinded, controlled, clinical trial with sample ( n = 27) was comprised of patients between 20 and 65 years, diagnosed with pain of mechanical origin characterized by having a duration of at least 12 weeks and no serious complications. Each group received 8 interventions of 30 minutes. Friedman ANOVA test obtained statistically significant differences of Oswestry, NRS, and Schober variables ( p < 0.05) in the three measurements (pretest, posttest 1, and posttest 2), in each individual group. ANOVA Kruskal-Wallis test was used for comparison between groups, and Oswestry Disability values were significantly higher ( p = 0.024) in the group receiving both treatments. Both individual groups reduce pain levels, improve disability, and increase the flexibility of the lumbar spine. The combination therapy provides greater benefits in terms of lumbar disability. This study is registered on March 8, 2016, with NCT02721914.

Comparison of the delay in processing time and protective plastic cases in two phosphor plate systems.

PubMed

Aktan, Ali Murat; Ciftçi, Mehmet Ertuğrul; Akgünlü, Faruk

2012-01-01

The purpose of this study was to analyze two phosphor plate systems (PSPs) (Dürr Dental, Digora Optime) according to their scanning delay and protective plastic case performances. Two PSPs using an aluminum step wedge were exposed. These plates were placed in three different protective plastic cases (manufacturers' original cases, black case, and white case) before obtaining the radiographs and were then processed immediately and 1, 5, 10, 30, 60, 120, 240, and 480 min after exposure. Mean gray values (MGVs) of the 3rd, 5th, 7th, and 9th steps of the wedges were compared using ANOVA. Statistically significant differences were found between the two PSPs (P < 0.001). ANOVA revealed that the MGVs of four steps of the wedges were significantly different from each other for all scan delays (P < 0.001). MGVs increased with increasing scanning delay, except the group with Dürr plates in their original cases. Reduction in image quality began 5 min after exposure in the other Dürr plate groups. Within the limitations of the current study, it can be concluded that scanning delay causes a reduction in image quality, and using the manufacturer's original protective case will result in better performance of PSPs.

Renal dysfunction in liver cirrhosis and its correlation with Child-Pugh score and MELD score

NASA Astrophysics Data System (ADS)

Siregar, G. A.; Gurning, M.

2018-03-01

Renal dysfunction (RD) is a serious and common complication in a patient with liver cirrhosis. It provides a poor prognosis. The aim of our study was to evaluate the renal function in liver cirrhosis, also to determine the correlation with the graduation of liver disease assessed by Child-Pugh Score (CPS) and MELD score. This was a cross-sectional study included patients with liver cirrhosis admitted to Adam Malik Hospital Medan in June - August 2016. We divided them into two groups as not having renal dysfunction (serum creatinine < 1.5 mg/dL) and having renal dysfunction (serum creatinine ≤ 1.5 mg/dL). For the processing of data, SPSS 22.0 was used. Statistical methods used: Chi-square, Fisher exact, one way ANOVA, Kruskal Wallis test and Pearson coefficient of correlation. The level of significance was p<0.05. 55 patients with presented with renal dysfunction were 16 (29.1 %). There was statistically significant inverse correlation between GFR and CPS (r = -0.308), GFR and MELD score (r = -0.278). There was a statistically significant correlation between creatinine and MELD score (r = 0.359), creatinine and CPS (r = 0.382). The increase of the degree of liver damage is related to the increase of renal dysfunction.

Middle school science curriculum design and 8th grade student achievement in Massachusetts public schools

NASA Astrophysics Data System (ADS)

Clifford, Betsey A.

The Massachusetts Department of Elementary and Secondary Education (DESE) released proposed Science and Technology/Engineering standards in 2013 outlining the concepts that should be taught at each grade level. Previously, standards were in grade spans and each district determined the method of implementation. There are two different methods used teaching middle school science: integrated and discipline-based. In the proposed standards, the Massachusetts DESE uses grade-by-grade standards using an integrated approach. It was not known if there is a statistically significant difference in student achievement on the 8th grade science MCAS assessment for students taught with an integrated or discipline-based approach. The results on the 8th grade science MCAS test from six public school districts from 2010 -- 2013 were collected and analyzed. The methodology used was quantitative. Results of an ANOVA showed that there was no statistically significant difference in overall student achievement between the two curriculum models. Furthermore, there was no statistically significant difference for the various domains: Earth and Space Science, Life Science, Physical Science, and Technology/Engineering. This information is useful for districts hesitant to make the change from a discipline-based approach to an integrated approach. More research should be conducted on this topic with a larger sample size to better support the results.

Evaluating the statistical performance of less applied algorithms in classification of worldview-3 imagery data in an urbanized landscape

NASA Astrophysics Data System (ADS)

Ranaie, Mehrdad; Soffianian, Alireza; Pourmanafi, Saeid; Mirghaffari, Noorollah; Tarkesh, Mostafa

2018-03-01

In recent decade, analyzing the remotely sensed imagery is considered as one of the most common and widely used procedures in the environmental studies. In this case, supervised image classification techniques play a central role. Hence, taking a high resolution Worldview-3 over a mixed urbanized landscape in Iran, three less applied image classification methods including Bagged CART, Stochastic gradient boosting model and Neural network with feature extraction were tested and compared with two prevalent methods: random forest and support vector machine with linear kernel. To do so, each method was run ten time and three validation techniques was used to estimate the accuracy statistics consist of cross validation, independent validation and validation with total of train data. Moreover, using ANOVA and Tukey test, statistical difference significance between the classification methods was significantly surveyed. In general, the results showed that random forest with marginal difference compared to Bagged CART and stochastic gradient boosting model is the best performing method whilst based on independent validation there was no significant difference between the performances of classification methods. It should be finally noted that neural network with feature extraction and linear support vector machine had better processing speed than other.

Comparative evaluation of the effect of denture cleansers on the surface topography of denture base materials: An in-vitro study

PubMed Central

Jeyapalan, Karthigeyan; Kumar, Jaya Krishna; Azhagarasan, N. S.

2015-01-01

Aims: The aim was to evaluate and compare the effects of three chemically different commercially available denture cleansing agents on the surface topography of two different denture base materials. Materials and Methods: Three chemically different denture cleansers (sodium perborate, 1% sodium hypochlorite, 0.2% chlorhexidine gluconate) were used on two denture base materials (acrylic resin and chrome cobalt alloy) and the changes were evaluated at 3 times intervals (56 h, 120 h, 240 h). Changes from baseline for surface roughness were recorded using a surface profilometer and standard error of the mean (SEM) both quantitatively and qualitatively, respectively. Qualitative surface analyses for all groups were done by SEM. Statistical Analysis Used: The values obtained were analyzed statistically using one-way ANOVA and paired t-test. Results: All three denture cleanser solutions showed no statistically significant surface changes on the acrylic resin portions at 56 h, 120 h, and 240 h of immersion. However, on the alloy portion changes were significant at the end of 120 h and 240 h. Conclusion: Of the three denture cleansers used in the study, none produced significant changes on the two denture base materials for the short duration of immersion, whereas changes were seen as the immersion periods were increased. PMID:26538915

48-hours administration of fenoterol in spontaneous preterm labor - does it affect fetal preload?

PubMed

Grzesiak, Mariusz; Forys, Sebastian; Sobczak, Malgorzata; Ahmed, Rehana B; Wilczynski, Jan

2013-01-01

to investigate whether any changes in the preload index (PLI) occur within the first 48 hours of fenoterol intravenous tocolysis. Doppler evaluation of placental and fetal circulation was performed in 36 pregnant women prior to fenoterol administration and after 24/48 hours. Measurements were obtained from a longitudinal section of the inferior vena cava (IVC) and preload index was calculated. To determine changes over time, an all study variable analysis of variance (ANOVA) for repeated measurements, followed by Tukey-Kramer's multiple comparison test was used. The effects of additional clinical covariates were checked. The maternal heart rate values were significantly increased after 24 hours and 48 hours in comparison to pre-treatment values. No significant changes in fetal heart rate were observed during treatment. The fetal IVC PLI values were significantly reduced after 24 hours and 48 hours of treatment. The increase in PLI values when comparing 24 and 48 hours results were not statistically significant. These observations were consistent with ANOVA post-hoc analysis. 48 hours intravenous administration of fenoterol appears not to alter inferior vena cava blood flow by itself. The reduction in PLI values may reflect lower fetal preload conditions during the course of successful tocolytic treatment. Therefore, Doppler IVC PLI measurement should be considered as a possible additional assessment method of effectiveness of treatment. However, other Doppler venous blood flow parameters should be assessed to confirm the results and clarify whether maternal corticosteroids administration may be interfering with the results.

LED traffic signal replacement schedules : facilitating smooth freight flows.

DOT National Transportation Integrated Search

2011-11-01

This research details a field study of LED traffic signals in Missouri and develops a replacement schedule based on key findings. : Rates of degradation were statistically analyzed using Analysis of Variance (ANOVA). Results of this research will pro...

A Comparison of implant impression precision: Different materials and techniques

PubMed Central

Tabesh, Mahtab; Alikhasi, Marzieh

2018-01-01

Background Precision of implant impressions is a prerequisite for long-term success of implant supported prostheses. Impression materials and impression techniques are two important factors that impression precision relies on. Material and Methods A model of edentulous maxilla containing four implants inserted by All-on-4 guide was constructed. Seventy two impressions using polyether (PE), polyvinyl siloxane (PVS), and vinyl siloxanether (VSE) materials with direct and indirect techniques were made (n=12). Coordinates of implants in casts were measured using coordinate measuring machine (CMM). Data were analyzed with ANOVA; t-test and Tukey test were used for post hoc. Results With two-way ANOVA, mean values of linear displacements of implants were significantly different among materials and techniques. One-way ANOVA and Tukey showed significant difference between PE and VSE (P=0.019), PE and PVS (P=0.002) in direct technique, and between PVS and PE (P<0.001), PVS and VSE (P<0.001) in indirect technique. One-way ANOVA and t-test showed significant difference between the two techniques in PVS groups (P<0.001) and in PE groups (P=0.02). Two-way ANOVA showed mean values of rotational displacement of implants were significantly different among materials. One-way ANOVA and Tukey test showed significant difference between PVS and PE (P=0.001) and between PVS and VSE (P=0.012) in indirect groups. Conclusions On the basis of the results, when deciding on the material to make an impression of implants, PE is recommended for direct technique while PE and VSE are recommended for indirect technique. Recommended technique for VSE is either direct or indirect; and for PE and PVS is direct. Key words:Polyvinyl siloxane, polyether, vinyl siloxanether, direct technique, indirect technique, All-on-4, coordinate measuring machine. PMID:29670733

The Global Error Assessment (GEA) model for the selection of differentially expressed genes in microarray data.

PubMed

Mansourian, Robert; Mutch, David M; Antille, Nicolas; Aubert, Jerome; Fogel, Paul; Le Goff, Jean-Marc; Moulin, Julie; Petrov, Anton; Rytz, Andreas; Voegel, Johannes J; Roberts, Matthew-Alan

2004-11-01

Microarray technology has become a powerful research tool in many fields of study; however, the cost of microarrays often results in the use of a low number of replicates (k). Under circumstances where k is low, it becomes difficult to perform standard statistical tests to extract the most biologically significant experimental results. Other more advanced statistical tests have been developed; however, their use and interpretation often remain difficult to implement in routine biological research. The present work outlines a method that achieves sufficient statistical power for selecting differentially expressed genes under conditions of low k, while remaining as an intuitive and computationally efficient procedure. The present study describes a Global Error Assessment (GEA) methodology to select differentially expressed genes in microarray datasets, and was developed using an in vitro experiment that compared control and interferon-gamma treated skin cells. In this experiment, up to nine replicates were used to confidently estimate error, thereby enabling methods of different statistical power to be compared. Gene expression results of a similar absolute expression are binned, so as to enable a highly accurate local estimate of the mean squared error within conditions. The model then relates variability of gene expression in each bin to absolute expression levels and uses this in a test derived from the classical ANOVA. The GEA selection method is compared with both the classical and permutational ANOVA tests, and demonstrates an increased stability, robustness and confidence in gene selection. A subset of the selected genes were validated by real-time reverse transcription-polymerase chain reaction (RT-PCR). All these results suggest that GEA methodology is (i) suitable for selection of differentially expressed genes in microarray data, (ii) intuitive and computationally efficient and (iii) especially advantageous under conditions of low k. The GEA code for R software is freely available upon request to authors.

Feature selection from a facial image for distinction of sasang constitution.

PubMed

Koo, Imhoi; Kim, Jong Yeol; Kim, Myoung Geun; Kim, Keun Ho

2009-09-01

Recently, oriental medicine has received attention for providing personalized medicine through consideration of the unique nature and constitution of individual patients. With the eventual goal of globalization, the current trend in oriental medicine research is the standardization by adopting western scientific methods, which could represent a scientific revolution. The purpose of this study is to establish methods for finding statistically significant features in a facial image with respect to distinguishing constitution and to show the meaning of those features. From facial photo images, facial elements are analyzed in terms of the distance, angle and the distance ratios, for which there are 1225, 61 250 and 749 700 features, respectively. Due to the very large number of facial features, it is quite difficult to determine truly meaningful features. We suggest a process for the efficient analysis of facial features including the removal of outliers, control for missing data to guarantee data confidence and calculation of statistical significance by applying ANOVA. We show the statistical properties of selected features according to different constitutions using the nine distances, 10 angles and 10 rates of distance features that are finally established. Additionally, the Sasang constitutional meaning of the selected features is shown here.

Reproducibility of ZrO2-based freeze casting for biomaterials.

PubMed

Naleway, Steven E; Fickas, Kate C; Maker, Yajur N; Meyers, Marc A; McKittrick, Joanna

2016-04-01

The processing technique of freeze casting has been intensely researched for its potential to create porous scaffold and infiltrated composite materials for biomedical implants and structural materials. However, in order for this technique to be employed medically or commercially, it must be able to reliably produce materials in great quantities with similar microstructures and properties. Here we investigate the reproducibility of the freeze casting process by independently fabricating three sets of eight ZrO2-epoxy composite scaffolds with the same processing conditions but varying solid loading (10, 15 and 20 vol.%). Statistical analyses (One-way ANOVA and Tukey's HSD tests) run upon measurements of the microstructural dimensions of these composite scaffold sets show that, while the majority of microstructures are similar, in all cases the composite scaffolds display statistically significant variability. In addition, composite scaffolds where mechanically compressed and statistically analyzed. Similar to the microstructures, almost all of their resultant properties displayed significant variability though most composite scaffolds were similar. These results suggest that additional research to improve control of the freeze casting technique is required before scaffolds and composite scaffolds can reliably be reproduced for commercial or medical applications. Copyright © 2015 Elsevier B.V. All rights reserved.

Feature Selection from a Facial Image for Distinction of Sasang Constitution

PubMed Central

Koo, Imhoi; Kim, Jong Yeol; Kim, Myoung Geun

2009-01-01

Recently, oriental medicine has received attention for providing personalized medicine through consideration of the unique nature and constitution of individual patients. With the eventual goal of globalization, the current trend in oriental medicine research is the standardization by adopting western scientific methods, which could represent a scientific revolution. The purpose of this study is to establish methods for finding statistically significant features in a facial image with respect to distinguishing constitution and to show the meaning of those features. From facial photo images, facial elements are analyzed in terms of the distance, angle and the distance ratios, for which there are 1225, 61 250 and 749 700 features, respectively. Due to the very large number of facial features, it is quite difficult to determine truly meaningful features. We suggest a process for the efficient analysis of facial features including the removal of outliers, control for missing data to guarantee data confidence and calculation of statistical significance by applying ANOVA. We show the statistical properties of selected features according to different constitutions using the nine distances, 10 angles and 10 rates of distance features that are finally established. Additionally, the Sasang constitutional meaning of the selected features is shown here. PMID:19745013

Silica coating on alumina ceramic: comparison of three chairside air-abrasion devices working for different times and distances.

PubMed

Pestana Passos, S; Dias Vanderlei, A; Ozcan, M; Felipe Valandro, L F; Felipe Valandro, L

2011-03-01

This study evaluated, by scanning electron microscope (SEM) and EDS, the effect of different strategies for silica coating (sandblasters, time and distance) of a glass-infiltrated ceramic (In-Ceram Alumina). Forty-one ceramic blocks were produced. For comparison of the three air-abrasion devices, 15 ceramic samples were divided in three groups (N.=5): Bioart, Microetcher and Ronvig (air-abrasion parameters: 20 s at a distance of 10 mm). For evaluation of the time and distance factors, ceramic samples (N.=5) were allocated in groups considering three applied times (5 s, 13 s and 20 s) and two distances (10 mm and 20 mm), using the Ronvig device. In a control sample, no surface treatment was performed. After that, the micro-morphologic analyzes of the ceramic surfaces were made using SEM. EDS analyzes were carried out to detect the % of silica on representative ceramic surface. ANOVA and Tukey tests were used to analyze the results. One-way ANOVA showed the silica deposition was different for different devices (P=0.0054). The Ronvig device promoted the highest silica coating compared to the other devices (Tukey test). Two-way ANOVA showed the distance and time factors did not affect significantly the silica deposition (application time and distance showed no statistical difference). The Ronvig device provided the most effective silica deposition on glass-infiltrated alumina ceramic surface and the studied time and distance for air-abrasion did not affect the silica coating.

Evaluation of the three-dimensional accuracy of implant impression techniques in two simulated clinical conditions by optical scanning.

PubMed

Sabouhi, Mahmoud; Bajoghli, Farshad; Abolhasani, Majid

2015-01-01

The success of an implant-supported prosthesis is dependent on the passive fit of its framework fabricated on a precise cast. The aim of this in vitro study was to digitally compare the three-dimensional accuracy of implant impression techniques in partially and completely edentulous conditions. The master model simulated two clinical conditions. The first condition was a partially edentulous mandibular arch with an anterior edentulous space (D condition). Two implant analogs were inserted in bilateral canine sites. After elimination of the teeth, the model was converted to a completely edentulous condition (E condition). Three different impression techniques were performed (open splinted [OS], open unsplinted [OU], closed [C]) for each condition. Six groups of casts (DOS, DOU, DC, EOS, EOU, EC) (n = 8), totaling 48 casts, were made. Two scan bodies were secured onto the master edentulous model and onto each test cast and digitized by an optical scanning system. The related scans were superimposed, and the mean discrepancy for each cast was determined. The statistical analysis showed no significant difference in the accuracy of casts as a function of model status (P = .78, analysis of variance [ANOVA] test), impression technique (P = .57, ANOVA test), or as the combination of both (P = .29, ANOVA test). The distribution of data was normal (Kolmogorov-Smirnov test). Model status (dentate or edentulous) and impression technique did not influence the precision of the casts. There is no difference among any of the impression techniques in either simulated clinical condition.

EFFECT OF LIGHT-CURING UNITS AND ACTIVATION MODE ON POLYMERIZATION SHRINKAGE AND SHRINKAGE STRESS OF COMPOSITE RESINS

PubMed Central

Lopes, Lawrence Gonzaga; Franco, Eduardo Batista; Pereira, José Carlos; Mondelli, Rafael Francisco Lia

2008-01-01

The aim of this study was to evaluate the polymerization shrinkage and shrinkage stress of composites polymerized with a LED and a quartz tungsten halogen (QTH) light sources. The LED was used in a conventional mode (CM) and the QTH was used in both conventional and pulse-delay modes (PD). The composite resins used were Z100, A110, SureFil and Bisfil 2B (chemical-cured). Composite deformation upon polymerization was measured by the strain gauge method. The shrinkage stress was measured by photoelastic analysis. The polymerization shrinkage data were analyzed statistically using two-way ANOVA and Tukey test (p≤0.05), and the stress data were analyzed by one-way ANOVA and Tukey's test (p≤0.05). Shrinkage and stress means of Bisfil 2B were statistically significant lower than those of Z100, A110 and SureFil. In general, the PD mode reduced the contraction and the stress values when compared to CM. LED generated the same stress as QTH in conventional mode. Regardless of the activation mode, SureFil produced lower contraction and stress values than the other light-cured resins. Conversely, Z100 and A110 produced the greatest contraction and stress values. As expected, the chemically cured resin generated lower shrinkage and stress than the light-cured resins. In conclusion, The PD mode effectively decreased contraction stress for Z100 and A110. Development of stress in light-cured resins depended on the shrinkage value. PMID:19089287

Assessment of the mechanics of a tissue-engineered rat trachea in an image-processing environment.

PubMed

Silva, Thiago Henrique Gomes da; Pazetti, Rogerio; Aoki, Fabio Gava; Cardoso, Paulo Francisco Guerreiro; Valenga, Marcelo Henrique; Deffune, Elenice; Evaristo, Thaiane; Pêgo-Fernandes, Paulo Manuel; Moriya, Henrique Takachi

2014-07-01

Despite the recent success regarding the transplantation of tissue-engineered airways, the mechanical properties of these grafts are not well understood. Mechanical assessment of a tissue-engineered airway graft before implantation may be used in the future as a predictor of function. The aim of this preliminary work was to develop a noninvasive image-processing environment for the assessment of airway mechanics. Decellularized, recellularized and normal tracheas (groups DECEL, RECEL, and CONTROL, respectively) immersed in Krebs-Henseleit solution were ventilated by a small-animal ventilator connected to a Fleisch pneumotachograph and two pressure transducers (differential and gauge). A camera connected to a stereomicroscope captured images of the pulsation of the trachea before instillation of saline solution and after instillation of Krebs-Henseleit solution, followed by instillation with Krebs-Henseleit with methacholine 0.1 M (protocols A, K and KMCh, respectively). The data were post-processed with computer software and statistical comparisons between groups and protocols were performed. There were statistically significant variations in the image measurements of the medial region of the trachea between the groups (two-way analysis of variance [ANOVA], p<0.01) and of the proximal region between the groups and protocols (two-way ANOVA, p<0.01). The technique developed in this study is an innovative method for performing a mechanical assessment of engineered tracheal grafts that will enable evaluation of the viscoelastic properties of neo-tracheas prior to transplantation.

Antimicrobial and anti-adherence activity of various combinations of coffee-chicory solutions on Streptococcus mutans: An in-vitro study

PubMed Central

Sharma, Rama; Reddy, Vamsi Krishna L; Prashant, GM; Ojha, Vivek; Kumar, Naveen PG

2014-01-01

Context: Several studies have demonstrated the activity of natural plants on the dental biofilm and caries development. But few studies on the antimicrobial activity of coffee-based solutions were found in the literature. Further there was no study available to check the antimicrobial effect of coffee solutions with different percentages of chicory in it. Aims: To evaluate the antimicrobial activity of different combinations of coffee-chicory solutions and their anti-adherence effect on Streptococcus mutans to glass surface. Materials and Methods: Test solutions were prepared. For antimicrobial activity testing, tubes containing test solution and culture medium were inoculated with a suspension of S. mutans followed by plating on Brain Heart Infusion (BHI) agar. S. mutans adherence to glass in presence of the different test solutions was also tested. The number of adhered bacteria (CFU/mL) was determined by plating method. Statistical Analysis: Statistical significance was measured using one way ANOVA followed by Tukey's post hoc test. P value < 0.05 was considered statistically significant. Results: Pure chicory had shown significantly less bacterial count compared to all other groups. Groups IV and V had shown significant reduction in bacterial counts over the period of 4 hrs. Regarding anti-adherence effect, group I-IV had shown significantly less adherence of bacteria to glass surface. Conclusions: Chicory exerted antibacterial effect against S. mutans while coffee reduced significantly the adherence of S. mutans to the glass surface. PMID:25328299

Postoperative Pain after Endodontic Treatment of Asymptomatic Teeth Using Rotary Instruments: A Randomized Clinical Trial

PubMed Central

Shahi, Shahriar; Asghari, Vahideh; Rahimi, Saeed; Lotfi, Mehrdad; Samiei, Mohammad; Yavari, Hamidreza; Shakouie, Sahar; Nezafati, Saeed

2016-01-01

Introduction: The aim of the present study was to compare the effect of two different rotary instruments on postoperative pain in teeth with asymptomatic irreversible pulpitis. Methods and Materials: A total of 78 mandibular first and second molars were divided into two groups (n=39) and their root canal preparation was carried out with either RaCe or ProTaper rotary instruments. All the subjects underwent one-visit root canal treatment and the severity of postoperative pain was evaluated using visual analog scale (VAS) at 4-, 12-, 24-, 48- and 72-h and 1-week intervals. In addition, the need for taking analgesics was recorded. Data were analyzed with the repeated-measures ANOVA and the Mann-Whitney U test was used for two-by-two comparison. Statistical significance was set at 0.05. Results: Comparison of mean pain severity between the two groups at various postoperative intervals did not reveal any significant differences (P=0.10). The difference in amount of analgesics taken by each groups was not statistically significant (P=0.25). Conclusion: There were no significant differences in the postoperative pain reported between the two groups; which indicates the clinical acceptability of both systems. PMID:26843876

The Acute Effects of Upper Extremity Stretching on Throwing Velocity in Baseball Throwers

PubMed Central

Melton, Jason; Delobel, Ashley; Puentedura, Emilio J.

2013-01-01

Purpose. To examine the effects of static and proprioceptive neuromuscular facilitation (PNF) stretching of the shoulder internal rotators on throwing velocity. Subjects. 27 male throwers (mean age = 25.1 years old, SD = 2.4) with adequate knowledge of demonstrable throwing mechanics. Study Design. Randomized crossover trial with repeated measures. Methods. Subjects warmed up, threw 10 pitches at their maximum velocity, were randomly assigned to 1 of 3 stretching protocols (static, PNF, or no stretch), and then repeated their 10 pitches. Velocities were recorded after each pitch and average and peak velocities were recorded after each session. Results. Data were analyzed using a 3 × 2 repeated measures ANOVA. No significant interaction between stretching and throwing velocity was observed. Main effects for time were not statistically significant. Main effects for the stretching groups were statistically significant. Discussion. Results suggest that stretching of the shoulder internal rotators did not significantly affect throwing velocity immediately after stretching. This may be due to the complexity of the throwing task. Conclusions. Stretching may be included in a thrower's warm-up without any effects on throwing velocity. Further research should be performed using a population with more throwing experience and skill. PMID:26464880

Laparoscopic skills training using a webcam trainer.

PubMed

Chung, Steve Y; Landsittel, Douglas; Chon, Chris H; Ng, Christopher S; Fuchs, Gerhard J

2005-01-01

Many sophisticated and expensive trainers have been developed to assist surgeons in learning basic laparoscopic skills. We developed an inexpensive trainer and evaluated its effectiveness. The webcam laparoscopic training device is composed of a webcam, cardboard box, desk lamp and home computer. This homemade trainer was evaluated against 2 commercially available systems, namely the video Pelvitrainer (Karl Storz Endoscopy, Culver City, California) and the dual mirror Simuview (Simulab Corp., Seattle, Washington). The Pelvitrainer consists of a fiberglass box, single lens optic laparoscope, fiberoptic light source, endoscopic camera and video monitor, while the Simuview trainer uses 2 offset, facing mirrors and an uncovered plastic box. A total of 42 participants without prior laparoscopic training were enrolled in the study and asked to execute 2 tasks, that is peg transfer and pattern cutting. Participants were randomly assigned to 6 groups with each group representing a different permutation of trainers to be used. The time required for participants to complete each task was recorded and differences in performance were calculated. Paired t tests, the Wilcoxon signed rank test and ANOVA were performed to analyze the statistical difference in performance times for all conditions. Statistical analyses of the 2 tasks showed no significant difference for the video and webcam trainers. However, the mirror trainer gave significantly higher outcome values for tasks 1 and 2 compared to the video (p = 0.01 and <0.01) and webcam (p = 0.04 and <0.01, respectively) methods. ANOVA indicated no overall difference for tasks 1 and 2 across the orderings (p = 0.36 and 0.99, respectively). However, by attempt 3 the time required to complete the skill tests decreased significantly for all 3 trainers (each p <0.01). Our homemade webcam system is comparable in function to the more elaborate video trainer but superior to the dual mirror trainer. For novice laparoscopists we believe that the webcam system is an inexpensive and effective laparoscopic training device. Furthermore, the webcam system also allows instant recording and review of techniques.

Roles of frequency, attitudes, and multiple intelligence modality surrounding Electricity Content-Based Reader's Theatre

NASA Astrophysics Data System (ADS)

Hosier, Julie Winchester

Integration of subjects is something elementary teachers must do to insure required objectives are covered. Science-based Reader's Theatre is one way to weave reading into science. This study examined the roles of frequency, attitudes, and Multiple Intelligence modalities surrounding Electricity Content-Based Reader's Theatre. This study used quasi-experimental, repeated measures ANOVA with time as a factor design. A convenience sample of two fifth-grade classrooms participated in the study for eighteen weeks. Five Electricity Achievement Tests were given throughout the study to assess students' growth. A Student Reader's Theatre Attitudinal Survey revealed students' attitudes before and after Electricity Content-Based Reader's Theatre treatment. The Multiple Intelligence Inventory for Kids (Faris, 2007) examined whether Multiple Intelligence modality played a role in achievement on Electricity Test 4, the post-treatment test. Analysis using repeated measures ANOVA and an independent t-test found that students in the experimental group, which practiced its student-created Electricity Content-Based Reader's Theatre skits ten times versus two times for the for control group, did significantly better on Electricity Achievement Test 4, t(76) = 3.018, p = 0.003. Dependent t-tests did not find statistically significant differences between students' attitudes about Electricity Content-Based Reader's Theatre before and after treatment. A Kruskal-Wallis test found no statistically significant difference between the various Multiple Intelligence modalities score mean ranks (x2 = 5.57, df = 2, alpha = .062). Qualitative data do, however, indicate students had strong positive feelings about Electricity Content-Based Reader's Theatre after treatment. Students indicated it to be motivating, confidence-building, and a fun way to learn about science; however, they disliked writing their own scripts. Examining the frequency, attitudes, and Multiple Intelligence modalities lead to the conclusion that the role of frequency had the greatest impact on the success of Electricity Content-Based Reader's Theatre. The participating teachers, students, and research found integrating science and reading through Electricity Content-Based Reader's Theatre beneficial.

Planetarium instructional efficacy: A research synthesis

NASA Astrophysics Data System (ADS)

Brazell, Bruce D.

The purpose of the current study was to explore the instructional effectiveness of the planetarium in astronomy education using meta-analysis. A review of the literature revealed 46 studies related to planetarium efficacy. However, only 19 of the studies satisfied selection criteria for inclusion in the meta-analysis. Selected studies were then subjected to coding procedures, which extracted information such as subject characteristics, experimental design, and outcome measures. From these data, 24 effect sizes were calculated in the area of student achievement and five effect sizes were determined in the area of student attitudes using reported statistical information. Mean effect sizes were calculated for both the achievement and the attitude distributions. Additionally, each effect size distribution was subjected to homogeneity analysis. The attitude distribution was found to be homogeneous with a mean effect size of -0.09, which was not significant, p = .2535. The achievement distribution was found to be heterogeneous with a statistically significant mean effect size of +0.28, p < .05. Since the achievement distribution was heterogeneous, the analog to the ANOVA procedure was employed to explore variability in this distribution in terms of the coded variables. The analog to the ANOVA procedure revealed that the variability introduced by the coded variables did not fully explain the variability in the achievement distribution beyond subject-level sampling error under a fixed effects model. Therefore, a random effects model analysis was performed which resulted in a mean effect size of +0.18, which was not significant, p = .2363. However, a large random effect variance component was determined indicating that the differences between studies were systematic and yet to be revealed. The findings of this meta-analysis showed that the planetarium has been an effective instructional tool in astronomy education in terms of student achievement. However, the meta-analysis revealed that the planetarium has not been a very effective tool for improving student attitudes towards astronomy.

Choroidal thinning in diabetes type 1 detected by 3-dimensional 1060 nm optical coherence tomography.

PubMed

Esmaeelpour, Marieh; Brunner, Simon; Ansari-Shahrezaei, Siamak; Shahrezaei, Siamak Ansari; Nemetz, Susanne; Povazay, Boris; Kajic, Vedran; Drexler, Wolfgang; Binder, Susanne

2012-10-03

To map choroidal (ChT) and retinal thickness (RT) in patients with diabetes type 1 with and without maculopathy and retinopathy in order to compare them with healthy subjects using high speed 3-dimensional (3D) 1060 nm optical coherence tomography (OCT). Thirty-three eyes from 33 diabetes type 1 subjects (23-57 years, 15 male) divided into groups of without pathology (NDR) and with pathology (DR; including microaneurysms, exudates, clinically significant macular-oedema and proliferative retinopathy) were compared with 20 healthy axial eye length and age-matched subjects (24-57 years, 9 male), imaged by high speed (60.000 A-scans/s) 3D 1060 nm OCT performed over 36° × 36° field of view. Ocular health status, disease duration, body mass index, haemoglobin-A1c, and blood pressure (bp) measurements were recorded. Subfoveal ChT, and 2D topographic maps between retinal pigment epithelium and the choroidal/scleral-interface, were automatically generated and statistically analyzed. Subfoveal ChT (mean ± SD, μm) for healthy eyes was 388 ± 109; significantly thicker than all diabetic groups, 291 ± 64 for NDR, and 303 ± 82 for DR (ANOVA P < 0.004, Tukey P = 0.01 for NDR and DR). Thinning did not relate to recorded factors (multi-regression analysis, P > 0.05). Compared with healthy eyes and the NDR, the averaged DR ChT-map demonstrated temporal thinning that extended superiorly and temporal-inferiorly (unpaired t-test, P < 0.05). Foveal RT and RT-maps showed no statistically significant difference between groups (mean SD, μm, healthy 212 ± 17, NDR 217 ± 15, DR 216 ± 27, ANOVA P > 0.05). ChT is decreased in diabetes type 1, independent of the absence of pathology and of diabetic disease duration. In eyes with pathology, 3D 1060 nm OCT averaged maps showed an extension of the thinning area matching retinal lesions and suggesting its involvement on onset or progression of disease.

Comparison of immediate complete denture, tooth and implant-supported overdenture on vertical dimension and muscle activity

PubMed Central

Shah, Farhan Khalid; Gebreel, Ashraf; Elshokouki, Ali hamed; Habib, Ahmed Ali

2012-01-01

PURPOSE To compare the changes in the occlusal vertical dimension, activity of masseter muscles and biting force after insertion of immediate denture constructed with conventional, tooth-supported and Implant-supported immediate mandibular complete denture. MATERIALS AND METHODS Patients were selected and treatment was carried out with all the three different concepts i.e, immediate denture constructed with conventional (Group A), tooth-supported (Group B) and Implant-supported (Group C) immediate mandibular complete dentures. Parameters of evaluation and comparison were occlusal vertical dimension measured by radiograph (at three different time intervals), Masseter muscle electromyographic (EMG) measurement by EMG analysis (at three different positions of jaws) and bite force measured by force transducer (at two different time intervals). The obtained data were statistically analyzed by using ANOVA-F test at 5% level of significance. If the F test was significant, Least Significant Difference test was performed to test further significant differences between variables. RESULTS Comparison between mean differences in occlusal vertical dimension for tested groups showed that it was only statistically significant at 1 year after immediate dentures insertion. Comparison between mean differences in wavelet packet coefficients of the electromyographic signals of masseter muscles for tested groups was not significant at rest position, but significant at initial contact position and maximum voluntary clench position. Comparison between mean differences in maximum biting force for tested groups was not statistically significant at 5% level of significance. CONCLUSION Immediate complete overdentures whether tooth or implant supported prosthesis is recommended than totally mucosal supported prosthesis. PMID:22737309

Influence of training and competitive sessions on peripheral β-endorphin levels in training show jumping horses.

PubMed

Cravana, Cristina; Medica, P; Ragonese, G; Fazio, E

2017-01-01

To investigate the effects of training sessions on circulating β-endorphin changes in sport horses before and after competition and to ascertain whether competition would affect this response. A total of 24 trained jumping horses were randomly assigned to one of two training groups: Group A (competing) and Group B (not competing). To determined plasma β-endorphin concentrations, two pre- and post-competition training weeks at aerobic workout and two competitive show jumping event days at anaerobic workout were measured before, 5 and 30 min after exercise. Exercise intensity is described using lactate concentrations and heart rate. The circuit design, intensity, and duration of training sessions were the same for both groups. In Group A, one-way analysis of variance for repeated measures (RM-ANOVA) showed significant effects of exercise on β-endorphin changes (F=14.41; p<0.001), only in the post-competition training sessions, while in Group B showed no significant effects. Two-way RM-ANOVA showed, after post-competition training sessions, a significant difference between Group A and Group B (F=6.235; p=0.023), with higher β-endorphin changes in Group A, compared to Group B. During the competitive show jumping sessions, one-way RM ANOVA showed significant effects of exercise on β-endorphin changes (F=51.10; p<0.001). The statistical analysis, in Group A, showed a significant difference between post-competition training and competitive exercise (F=6.32; p=0.024) with higher β-endorphin values in competitive sessions compared to those of post-competition training. Lactate concentrations seem to be the main factors being correlated with the raise of β-endorphin during anaerobic exercise of competitive events. Exercise of low intensity, as well as that one of training sessions, does not appear to stimulate a significant increased release of β-endorphin and it may depend on the duration of the exercise program. Moreover, the responses during exercise in the course of post-competition training sessions seem to be significantly different from those the pre-competition training. These data show that the preliminary competitive stress induced additional significant changes of β-endorphin pattern. It would reflect the need of a long-lasting modulation of fatigue and pain perception related to the effect of an additional physical and mental effort for the consecutive competitive and training sessions.

A prospective study of cognitive fluency and originality in children exposed in utero to carbamazepine, lamotrigine, or valproate monotherapy.

PubMed

McVearry, Kelly M; Gaillard, William D; VanMeter, John; Meador, Kimford J

2009-12-01

To investigate the differential effects of fetal exposure to antiepileptic drugs (AEDs) on cognitive fluency and flexibility in a prospective sample of children. This substudy of the Neurodevelopmental Effects of Antiepileptic Drugs investigation enrolled pregnant women with epilepsy on AED monotherapy (carbamazepine, lamotrigine, and valproate). Blinded to drug exposure, 54 children were tested for ability to generate ideas in terms of quantity (fluency/flexibility) and quality (originality). Forty-two children met inclusion criteria (mean age=4.2 years, SD=0.5) for statistical analyses of drug exposure group differences. Fluency was lower in the valproate group (mean=76.3, SD=7.53) versus the lamotrigine (mean=93.76, SD=13.5, ANOVA P<0.0015) and carbamazepine (mean=95.5, SD=18.1, ANOVA P<0.003) groups. Originality was lower in the valproate group (mean=84.2, SD=3.23) versus the lamotrigine (mean=103.1, SD=14.8, ANOVA P<0.002) and carbamazepine (mean=99.4, SD=17.1, ANOVA P<0.01) groups. These results were not explained by factors other than AED exposure. Children prenatally exposed to valproate demonstrate impaired fluency and originality compared with children exposed to lamotrigine and carbamazepine.

Effectiveness of Platelet Rich Plasma and Bone Graft in the Treatment of Intrabony Defects: A Clinico-radiographic Study

PubMed Central

Jalaluddin, Mohammad; Mahesh, Jayachandran; Mahesh, Rethi; Jayanti, Ipsita; Faizuddin, Mohamed; Kripal, Krishna; Nazeer, Nazia

2018-01-01

Background & Objectives: Periodontal disease is characterized by the presence of gingival inflammation, periodontal pocket formation, loss of connective tissue attachment and alveolar bone around the affected tooth. Different modalities have been employed in the treatment and regeneration of periodontal defects which include the use of bone grafts, PRP and other growth factors.The purpose of this prospective, randomized controlled study was to compare the regenerative efficacy of PRP and bonegraft in intrabony periodontal defects. Methodology: This randomized control trial was carried out in the Department of Periodontics & Oral Implantology, Kalinga Institute of Dental Sciences and Hospital, KIIT University, Bhubaneswar. The study sample included 20 periodontal infrabony defects in 20 patients, 12 males and 8 females. The patients were aged between 25 -45 years(with mean age of 35 years). The 20 sites selected for the study were was randomly divided into 2 groups of 10 sites each. Group A: PRP alone, Group B: Bone Graft. Statistical Anaysis & Results: Statistical Analysis Was Done Using SPSS (Version 18.0): Statistical analysis was done usingpaired ‘t’ tests and ANOVA that revealed a significant reduction ingingival index, plaque index, probing pocket depth and gain in clinical attachment level at various time intervalswithin both the groups. Radiographic evaluation revealed statistically significant defect fill (p<0.001) at the end of 6months within both the groups. However, there was astatistically significant difference seen in group B radiographically, when compared to group A. Conclusion: Both the groups showed promising results in enhancing periodontal regeneration; however the resultswith bonegraftwere comparatively better, although not statistically significant when compared to PRP alone. PMID:29682091

Preservice Teachers' Memories of Their Secondary Science Education Experiences

NASA Astrophysics Data System (ADS)

Hudson, Peter; Usak, Muhammet; Fančovičová, Jana; Erdoğan, Mehmet; Prokop, Pavol

2010-12-01

Understanding preservice teachers' memories of their education may aid towards articulating high-impact teaching practices. This study describes 246 preservice teachers' perceptions of their secondary science education experiences through a questionnaire and 28-item survey. ANOVA was statistically significant about participants' memories of science with 15 of the 28 survey items. Descriptive statistics through SPSS further showed that a teacher's enthusiastic nature (87%) and positive attitude towards science (87%) were regarded as highly memorable. In addition, explaining abstract concepts well (79%), and guiding the students' conceptual development with practical science activities (73%) may be considered as memorable secondary science teaching strategies. Implementing science lessons with one or more of these memorable science teaching practices may "make a difference" towards influencing high school students' positive long-term memories about science and their science education. Further research in other key learning areas may provide a clearer picture of high-impact teaching and a way to enhance pedagogical practices.

Two Methods of Automatic Evaluation of Speech Signal Enhancement Recorded in the Open-Air MRI Environment

NASA Astrophysics Data System (ADS)

Přibil, Jiří; Přibilová, Anna; Frollo, Ivan

2017-12-01

The paper focuses on two methods of evaluation of successfulness of speech signal enhancement recorded in the open-air magnetic resonance imager during phonation for the 3D human vocal tract modeling. The first approach enables to obtain a comparison based on statistical analysis by ANOVA and hypothesis tests. The second method is based on classification by Gaussian mixture models (GMM). The performed experiments have confirmed that the proposed ANOVA and GMM classifiers for automatic evaluation of the speech quality are functional and produce fully comparable results with the standard evaluation based on the listening test method.

Life expectancy evaluation and development of a replacement schedule for LED traffic signals.

DOT National Transportation Integrated Search

2011-03-01

This research details a field study of LED traffic signals in Missouri and develops a replacement schedule : based on key findings. Rates of degradation were statistically analyzed using Analysis of Variance : (ANOVA). Results of this research will p...

Differentiation of women with premenstrual dysphoric disorder, recurrent brief depression, and healthy controls by daily mood rating dynamics.

PubMed

Pincus, Steven M; Schmidt, Peter J; Palladino-Negro, Paula; Rubinow, David R

2008-04-01

Enhanced statistical characterization of mood-rating data holds the potential to more precisely classify and sub-classify recurrent mood disorders like premenstrual dysphoric disorder (PMDD) and recurrent brief depressive disorder (RBD). We applied several complementary statistical methods to differentiate mood rating dynamics among women with PMDD, RBD, and normal controls (NC). We compared three subgroups of women: NC (n=8); PMDD (n=15); and RBD (n=9) on the basis of daily self-ratings of sadness, study lengths between 50 and 120 days. We analyzed mean levels; overall variability, SD; sequential irregularity, approximate entropy (ApEn); and a quantification of the extent of brief and staccato dynamics, denoted 'Spikiness'. For each of SD, irregularity (ApEn), and Spikiness, we showed highly significant subgroup differences, ANOVA0.001 for each statistic; additionally, many paired subgroup comparisons showed highly significant differences. In contrast, mean levels were indistinct among the subgroups. For SD, normal controls had much smaller levels than the other subgroups, with RBD intermediate. ApEn showed PMDD to be significantly more regular than the other subgroups. Spikiness showed NC and RBD data sets to be much more staccato than their PMDD counterparts, and appears to suitably characterize the defining feature of RBD dynamics. Compound criteria based on these statistical measures discriminated diagnostic subgroups with high sensitivity and specificity. Taken together, the statistical suite provides well-defined specifications of each subgroup. This can facilitate accurate diagnosis, and augment the prediction and evaluation of response to treatment. The statistical methodologies have broad and direct applicability to behavioral studies for many psychiatric disorders, and indeed to similar analyses of associated biological signals across multiple axes.

Assertiveness and problem solving in midwives.

PubMed

Yurtsal, Zeliha Burcu; Özdemir, Levent

2015-01-01

Midwifery profession is required to bring solutions to problems and a midwife is expected to be an assertive person and to develop midwifery care. This study was planned to examine the relationship between assertiveness and problem-solving skills of midwives. This cross-sectional study was conducted with 201 midwives between July 2008 and February 2009 in the city center of Sivas. The Rathus Assertiveness Schedule (RAS) and Problem Solving Inventory (PSI) were used to determine the level of assertiveness and problem-solving skills of midwives. Statistical methods were used as mean, standard deviation, percentage, Student's T, ANOVA and Tukey HSD, Kruskal Wallis, Fisher Exact, Pearson Correlation and Chi-square tests and P < 0.05. The RAS mean scores and the PSI mean scores showed statistically significant differences in terms of a midwife's considering herself as a member of the health team, expressing herself within the health care team, being able to say "no" when necessary, cooperating with her colleagues, taking part in problem-solving skills training. A statistically significant negative correlation was found between the RAS and PSI scores. The RAS scores decreased while the problem-solving scores increased (r: -0451, P < 0.01). There were significant statistical differences between assertiveness levels and problem solving skills of midwives, and midwives who were assertive solved their problems better than did others. Assertiveness and problem-solving skills training will contribute to the success of the midwifery profession. Midwives able to solve problems, and display assertive behaviors will contribute to the development of midwifery profession.

Effects of ground and joint reaction force exercise on lumbar spine and femoral neck bone mineral density in postmenopausal women: a meta-analysis of randomized controlled trials

PubMed Central

2012-01-01

Background Low bone mineral density (BMD) and subsequent fractures are a major public health problem in postmenopausal women. The purpose of this study was to use the aggregate data meta-analytic approach to examine the effects of ground (for example, walking) and/or joint reaction (for example, strength training) exercise on femoral neck (FN) and lumbar spine (LS) BMD in postmenopausal women. Methods The a priori inclusion criteria were: (1) randomized controlled trials, (2) exercise intervention ≥ 24 weeks, (3) comparative control group, (4) postmenopausal women, (5) participants not regularly active, i.e., less than 150 minutes of moderate intensity (3.0 to 5.9 metabolic equivalents) weight bearing endurance activity per week, less than 75 minutes of vigorous intensity (> 6.0 metabolic equivalents) weight bearing endurance activity per week, resistance training < 2 times per week, (6) published and unpublished studies in any language since January 1, 1989, (7) BMD data available at the FN and/or LS. Studies were located by searching six electronic databases, cross-referencing, hand searching and expert review. Dual selection of studies and data abstraction were performed. Hedge’s standardized effect size (g) was calculated for each FN and LS BMD result and pooled using random-effects models. Z-score alpha values, 95%confidence intervals (CI) and number-needed-to-treat (NNT) were calculated for pooled results. Heterogeneity was examined using Q and I2. Mixed-effects ANOVA and simple meta-regression were used to examine changes in FN and LS BMD according to selected categorical and continuous variables. Statistical significance was set at an alpha value ≤0.05 and a trend at >0.05 to ≤ 0.10. Results Small, statistically significant exercise minus control group improvements were found for both FN (28 g’s, 1632 participants, g = 0.288, 95% CI = 0.102, 0.474, p = 0.002, Q = 90.5, p < 0.0001, I2 = 70.1%, NNT = 6) and LS (28 g’s, 1504 participants, g = 0.179, 95% CI = −0.003, 0.361, p = 0.05, Q = 77.7, p < 0.0001, I2 = 65.3%, NNT = 6) BMD. Clinically, it was estimated that the overall changes in FN and LS would reduce the 20-year relative risk of osteoporotic fracture at any site by approximately 11% and 10%, respectively. None of the mixed-effects ANOVA analyses were statistically significant. Statistically significant, or a trend for statistically significant, associations were observed for changes in FN and LS BMD and 20 different predictors. Conclusions The overall findings suggest that exercise may result in clinically relevant benefits to FN and LS BMD in postmenopausal women. Several of the observed associations appear worthy of further investigation in well-designed randomized controlled trials. PMID:22992273

Effects of ground and joint reaction force exercise on lumbar spine and femoral neck bone mineral density in postmenopausal women: a meta-analysis of randomized controlled trials.

PubMed

Kelley, George A; Kelley, Kristi S; Kohrt, Wendy M

2012-09-20

Low bone mineral density (BMD) and subsequent fractures are a major public health problem in postmenopausal women. The purpose of this study was to use the aggregate data meta-analytic approach to examine the effects of ground (for example, walking) and/or joint reaction (for example, strength training) exercise on femoral neck (FN) and lumbar spine (LS) BMD in postmenopausal women. The a priori inclusion criteria were: (1) randomized controlled trials, (2) exercise intervention ≥ 24 weeks, (3) comparative control group, (4) postmenopausal women, (5) participants not regularly active, i.e., less than 150 minutes of moderate intensity (3.0 to 5.9 metabolic equivalents) weight bearing endurance activity per week, less than 75 minutes of vigorous intensity (> 6.0 metabolic equivalents) weight bearing endurance activity per week, resistance training < 2 times per week, (6) published and unpublished studies in any language since January 1, 1989, (7) BMD data available at the FN and/or LS. Studies were located by searching six electronic databases, cross-referencing, hand searching and expert review. Dual selection of studies and data abstraction were performed. Hedge's standardized effect size (g) was calculated for each FN and LS BMD result and pooled using random-effects models. Z-score alpha values, 95%confidence intervals (CI) and number-needed-to-treat (NNT) were calculated for pooled results. Heterogeneity was examined using Q and I2. Mixed-effects ANOVA and simple meta-regression were used to examine changes in FN and LS BMD according to selected categorical and continuous variables. Statistical significance was set at an alpha value ≤0.05 and a trend at >0.05 to ≤ 0.10. Small, statistically significant exercise minus control group improvements were found for both FN (28 g's, 1632 participants, g = 0.288, 95% CI = 0.102, 0.474, p = 0.002, Q = 90.5, p < 0.0001, I2 = 70.1%, NNT = 6) and LS (28 g's, 1504 participants, g = 0.179, 95% CI = -0.003, 0.361, p = 0.05, Q = 77.7, p < 0.0001, I2 = 65.3%, NNT = 6) BMD. Clinically, it was estimated that the overall changes in FN and LS would reduce the 20-year relative risk of osteoporotic fracture at any site by approximately 11% and 10%, respectively. None of the mixed-effects ANOVA analyses were statistically significant. Statistically significant, or a trend for statistically significant, associations were observed for changes in FN and LS BMD and 20 different predictors. The overall findings suggest that exercise may result in clinically relevant benefits to FN and LS BMD in postmenopausal women. Several of the observed associations appear worthy of further investigation in well-designed randomized controlled trials.

A comparison of the effects of reflexology and relaxation on pain in women with multiple sclerosis.

PubMed

Nazari, Fatemeh; Soheili, Mozhgan; Hosseini, SayedMohsen; Shaygannejad, Vahid

2016-03-01

Pain is a common and significant symptom in many individuals with multiple sclerosis (MS). The presence and severity of pain in individuals with MS has also been shown to be associated with higher levels of depression, functional impairment, and fatigue. It is common for MS patients and their caregivers to worry about narcotic addiction in the management of chronic pain. Therefore, this study aimed to determine and compare the effects of reflexology and relaxation on pain in women suffering from MS. This study was a single-blind randomized clinical trial performed on 75 patients with MS referred to the MS Clinic of Ayatollah Kashani Hospital (Isfahan, Iran). After simple non-random sampling, using the minimization method, participants were randomly assigned to the three groups of reflexology, relaxation, and control. In the experimental groups, foot reflexology and relaxation interventions (Jacobson and Benson) were performed within 4 weeks, twice a week for 40 min. The control group received routine care and medical treatment as directed by a doctor. Data were collected using the Numerical Rating Scale before, immediately after, and 2 months after interventions in all three groups. Data analysis was performed using SPSS version 18 and descriptive and inferential statistical tests. Findings obtained from analysis of variance (ANOVA) showed no significant differences between mean pain intensity scores in the three groups preintervention and 2 months after interventions (p > 0.05). However, this difference was statistically significant immediately after the study (p < 0.05). Findings obtained from repeated measures ANOVA showed that the severity of pain significantly differed during different times in reflexology and relaxation (p < 0.05); however, this difference was not significant in the control group (p > 0.05). Furthermore, Fisher's least significant difference (LSD) revealed a significantly higher reduction in pain intensity scores in the reflexology group after the intervention, compared with the two other groups, but showed no significant differences between relaxation and control groups. There were no significant differences between the three groups 2 months after the interventions (p > 0.05). The results showed that both interventions are effective on relieving pain in women with MS; however, it appears that the effect of reflexology on pain reduction is greater than that of relaxation. Hence, these two methods can be recommended as effective techniques.

Therapeutic Efficacy of Orally Delivered Doxorubicin Nanoparticles in Rat Tongue Cancer Induced by 4-Nitroquinoline 1-Oxide

PubMed Central

Moradzadeh Khiavi, Monir; Rostami, Ahamd; Hamishekar, Hamed; Mesgari Abassi, Mehran; Aghbali, Amirala; Salehi, Roya; Abdollahi, Bita; Fotoohi, Soheila; Sina, Mahmud

2015-01-01

Purpose: Oral cancer is one of the most significant cancers in the world, and squamous cell carcinoma makes up about 94% of oral malignancies. The aim of the present study was to compare the efficacy of doxorubicin plus methotrexate - loaded nanoparticles on tongue squamous cell carcinoma induced by 4NQO and compare it with the commercial doxorubicin and methotrexate delivered orally on seventy SD male rats. Methods: 70 rats were divided into five groups. During the study, the animals were weighed by a digital scale once a week. Number of mortalities was recorded in the data collection forms. At the end of the treatment, biopsy samples were taken from rat tongues in order to evaluate the severity of dysplasia and the extent of cell proliferation. The results were analyzed using ANOVA, descriptive statistics and chi-square test. Results: No statistically significant difference was found in the mean weight of five groups (p>0.05). No significant relationship was found between groups and mortality rate (P = 0. 39). In addition, there was a significant relationship between groups and the degree of dysplasia (P <0.001). The statistical analysis showed a significant relationship between groups and the rate of cell proliferation (p <0.001). Conclusion: The results of the present study showed that the use of doxorubicin plus methotrexate - loaded nanoparticles orally had more therapeutic effects than commercial doxorubicin plus methotrexate. PMID:26236659

Comparison of chewing ability, oral health related quality of life and nutritional status before and after insertion of complete denture amongst edentulous patients in a Dental College of Pune.

PubMed

Madhuri, Sonawane; Hegde, Shetiya Sahana; Ravi, Shirahatti; Deepti, Agarwal; Simpy, Mahuli

2014-07-01

The relationship between tooth loss and nutritional intake is important. As people age, their diminished physical capacity and decreased income adversely affect their ability to maintain their teeth. The aim of the study was to assess and compare the chewing ability, oral health related quality of life and nutritional status before and after fabrication and insertion of complete denture amongst edentulous participants in a dental college. Non Randomized Intervention study. The study population consisted of 42 participants (16 females and 26 males), aged 50 years and above. Prior to commencement of the study, informed consent was obtained and validation and reliability test of the questionnaire were done. The data for chewing ability, GOHAI and nutritional status assessment was recorded at baseline, 3(rd), 6(th) and 12(th) month after denture fabrication and insertion. The statistical comparisons were performed by repeated measure ANOVA and Chi-square test. P value<0.05 was considered as statistically significant. Chewing ability, GOHAI, BMI (Body Mass Index) and data from Food-intake questionnaire showed statistically significant improvement from baseline to 6(th) month but no statistically significant improvement was observed from 6(th) month to 12(th) month. Nutritive value of food (protein, energy and fat) showed no significant difference over a period of 12 months (p<0.05). Thus, it was concluded that the intervention (denture insertion) was effective in increasing the chewing ability, body weight, food-intake, and oral health related quality of life.

Optical properties of mice skin for optical therapy relevant wavelengths: influence of gender and pigmentation

NASA Astrophysics Data System (ADS)

Sabino, C. P.; Deana, A. M.; Silva, D. F. T.; França, C. M.; Yoshimura, T. M.; Ribeiro, M. S.

2015-03-01

Red and near-infrared light have been widely employed in optical therapies. Skin is the most common optical barrier in non-invasive techniques and in many cases it is the target tissue itself. Consequently, to optimize the outcomes brought by lightbased therapies, the optical properties of skin tissue must be very well elucidated. In the present study, we evaluated the dorsal skin optical properties of albino (BALB/c) and pigmented (C57BL/6) mice using the Kubelka-Munk photon transport model. We evaluated samples from male and female young mice of both strains. Analysis was performed for wavelengths at 630, 660, 780, 810 and 905 nm due to their prevalent use in optical therapies, such as low-level light (or laser) and photodynamic therapies. Spectrophotometric measurements of diffuse transmittance and reflectance were performed using a single integrating sphere coupled to a proper spectrophotometer. Statistic analysis was made by two-way ANOVA, with Tukey as post-test and Levenne and Shapiro-Wilks as pre-tests. Statistical significance was considered when p<0.05. Our results show only a slight transmittance increment (<10 %) as wavelengths are increased from 630 to 905 nm, and no statistical significance was observed. Albino male mice present reduced transmittance levels for all wavelengths. The organization and abundance of skin composing tissues significantly influence its scattering optical properties although absorption remains constant. We conclude that factors such as subcutaneous adiposity and connective tissue structure can have statistically significant influence on mice skin optical properties and these factors have relevant variations among different gender and strains.

Effect of fasting ramadan in diabetes control status - application of extensive diabetes education, serum creatinine with HbA1c statistical ANOVA and regression models to prevent hypoglycemia.

PubMed

Aziz, Kamran M A

2013-09-01

Ramadan fasting is an obligatory duty for Muslims. Unique physiologic and metabolic changes occur during fasting which requires adjustments of diabetes medications. Although challenging, successful fasting can be accomplished if pre-Ramadan extensive education is provided to the patients. Current research was conducted to study effective Ramadan fasting with different OHAs/insulins without significant risk of hypoglycemia in terms of HbA1c reductions after Ramadan. ANOVA model was used to assess HbA1c levels among different education statuses. Serum creatinine was used to measure renal functions. Pre-Ramadan diabetes education with alteration of therapy and dosage adjustments for OHAs/insulin was done. Regression models for HbA1c before Ramadan with FBS before sunset were also synthesized as a tool to prevent hypoglycemia and successful Ramadan fasting in future. Out of 1046 patients, 998 patients fasted successfully without any episodes of hypoglycemia. 48 patients (4.58%) experienced hypoglycemia. Χ(2) Test for CRD/CKD with hypoglycemia was also significant (p-value < 0.001). Significant associations and linear regression were found for HbA1c and sunset FBS; RBS post-dawn with RBS mid-day and FBS at sunset. The proposed regression models of this study can be used as a guide in future for Ramadan diabetes management. Some relevant patents are also outlined in this paper.

The Changes of Tear Status after Conventional and Wavefront-Guided IntraLASIK

PubMed Central

Foo, Say Kiang; Kaur, Sharanjeet; Abd Manan, Faudziah; Low, Aloysius Joseph

2011-01-01

Background: IntraLASIK is a LASIK surgery that involved IntraLase femtosecond laser for the corneal flap creating. The objective of this research was to investigate and compare the changes in tear status at 1 and 3 months after undergoing conventional IntraLASIK with Bausch & Lomb PlanoScan (PS) algorithm, Bausch & Lomb Zyoptix Tissue Saving (ZTS) algorithm, and wavefront-guided (WG) IntraLASIK with VISX CustomVue. Methods: Tear status of 36 patients who were divided into 3 groups depending on the type of IntraLASIK they underwent (PS, n = 13; ZTS, n = 9; WG, n = 14) was evaluated. Tear status was determined by classifying the category of the thickness of pre-corneal tear lipid layer, non-invasive tear break-up time, and tear meniscus height. Repeated measures analysis of variance (ANOVA) and one way ANOVA were used for the statistical analyses. Results: The category of the thickness of tear lipid layer, non-invasive tear break up time and tear meniscus height were neither significantly changed after IntraLASIK for all groups nor showed significant difference among groups at 1 and 3 months post-IntraLASIK (P > 0.05). Blinking rate and palpebral aperture also had no significant changed after IntraLASIK. Conclusion: Both conventional (PS and ZTS) and WG IntraLASIK did not affect tear status up to 3 months post-IntraLASIK. WG IntraLASIK did not show superiority in preserving tear status 1 and 3 months post-surgery compared with conventional IntraLASIK. PMID:22135584

Analysis of tribological behaviour of zirconia reinforced Al-SiC hybrid composites using statistical and artificial neural network technique

NASA Astrophysics Data System (ADS)

Arif, Sajjad; Tanwir Alam, Md; Ansari, Akhter H.; Bilal Naim Shaikh, Mohd; Arif Siddiqui, M.

2018-05-01

The tribological performance of aluminium hybrid composites reinforced with micro SiC (5 wt%) and nano zirconia (0, 3, 6 and 9 wt%) fabricated through powder metallurgy technique were investigated using statistical and artificial neural network (ANN) approach. The influence of zirconia reinforcement, sliding distance and applied load were analyzed with test based on full factorial design of experiments. Analysis of variance (ANOVA) was used to evaluate the percentage contribution of each process parameters on wear loss. ANOVA approach suggested that wear loss be mainly influenced by sliding distance followed by zirconia reinforcement and applied load. Further, a feed forward back propagation neural network was applied on input/output date for predicting and analyzing the wear behaviour of fabricated composite. A very close correlation between experimental and ANN output were achieved by implementing the model. Finally, ANN model was effectively used to find the influence of various control factors on wear behaviour of hybrid composites.

Relationships Between Potentiation Effects After Ballistic Half-Squats and Bilateral Symmetry.

PubMed

Suchomel, Timothy J; Sato, Kimitake; DeWeese, Brad H; Ebben, William P; Stone, Michael H

2016-05-01

The purposes of this study were to examine the effect of ballistic concentric-only half-squats (COHS) on subsequent squat-jump (SJ) performances at various rest intervals and to examine the relationships between changes in SJ performance and bilateral symmetry at peak performance. Thirteen resistance-trained men performed an SJ immediately and every minute up to 10 min on dual force plates after 2 ballistic COHS repetitions at 90% of their 1-repetition-maximum COHS. SJ peak force, peak power, net impulse, and rate of force development (RFD) were compared using a series of 1-way repeated-measures ANOVAs. The percent change in performance at which peak performance occurred for each variable was correlated with the symmetry index scores at the corresponding time point using Pearson correlation coefficients. Statistical differences in peak power (P = .031) existed between rest intervals; however, no statistically significant pairwise comparisons were present (P > .05). No statistical differences in peak force (P = .201), net impulse (P = .064), and RFD (P = .477) were present between rest intervals. The relationships between changes in SJ performance and bilateral symmetry after the rest interval that produced the greatest performance for peak force (r = .300, P = .319), peak power (r = -.041, P = .894), net impulse (r = -.028, P = .927), and RFD (r = -.434, P = .138) were not statistically significant. Ballistic COHS may enhance SJ performance; however, the changes in performance were not related to bilateral symmetry.

Maxillary sinus augmentation by crestal access: a retrospective study on cavity size and outcome correlation.

PubMed

Spinato, Sergio; Bernardello, Fabio; Galindo-Moreno, Pablo; Zaffe, Davide

2015-12-01

Cone-beam computed tomography (CBCT) and radiographic outcomes of crestal sinus elevation, performed using mineralized human bone allograft, were analyzed to correlate results with maxillary sinus size. A total of 60 sinus augmentations in 60 patients, with initial bone ≤5 mm, were performed. Digital radiographs were taken at surgical implant placement time up to post-prosthetic loading follow-up (12-72 months), when CBCT evaluation was carried out. Marginal bone loss (MBL) was radiographically analyzed at 6 months and follow-up time post-loading. Sinus size (BPD), implant distance from palatal (PID) and buccal wall (BID), and absence of bone coverage of implant (intra-sinus bone loss--IBL) were evaluated and statistically evaluated by ANOVA and linear regression analyses. MBL increased as a function of time. MBL at final follow-up was statistically associated with MBL at 6 months. A statistically significant correlation of IBL with wall distance and of IBL/mm with time was identified with greater values in wide sinuses (WS ≥ 13.27 mm) than in narrow sinuses (NS < 13.27 mm). This study is the first quantitative and statistically significant confirmation that crestal technique with residual ridge height <5 mm is more appropriate and predictable, in terms of intra-sinus bone coverage, in narrow than in WS. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Combined effect of smear layer characteristics and hydrostatic pulpal pressure on dentine bond strength of HEMA-free and HEMA-containing adhesives.

PubMed

Mahdan, Mohd Haidil Akmal; Nakajima, Masatoshi; Foxton, Richard M; Tagami, Junji

2013-10-01

This study evaluated the combined effect of smear layer characteristics with hydrostatic pulpal pressure (PP) on bond strength and nanoleakage expression of HEMA-free and -containing self-etch adhesives. Flat dentine surfaces were obtained from extracted human molars. Smear layers were created by grinding with #180- or #600-SiC paper. Three HEMA-free adhesives (Xeno V, G Bond Plus, Beautibond Multi) and two HEMA-containing adhesives (Bond Force, Tri-S Bond) were applied to the dentine surfaces under hydrostatic PP or none. Dentine bond strengths were determined using the microtensile bond test (μTBS). Data were statistically analyzed using three- and two-way ANOVA with Tukey post hoc comparison test. Nanoleakage evaluation was carried out under a scanning electron microscope (SEM). Coarse smear layer preparation and hydrostatic PP negatively affected the μTBS of HEMA-free and -containing adhesives, but there were no significant differences. The combined experimental condition significantly reduced μTBS of the HEMA-free adhesives, while the HEMA-containing adhesives exhibited no significant differences. Two-way ANOVA indicated that for HEMA-free adhesives, there were significant interactions in μTBS between smear layer characteristics and pulpal pressure, while for HEMA-containing adhesives, there were no significant interactions between them. Nanoleakage formation within the adhesive layers of both adhesive systems distinctly increased in the combined experimental group. The combined effect of coarse smear layer preparation with hydrostatic PP significantly reduced the μTBS of HEMA-free adhesives, while in HEMA-containing adhesives, these effects were not obvious. Smear layer characteristics and hydrostatic PP would additively compromise dentine bonding of self-etch adhesives, especially HEMA-free adhesives. Copyright © 2013 Elsevier Ltd. All rights reserved.

Digital versus conventional techniques for pattern fabrication of implant-supported frameworks.

PubMed

Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

2018-01-01

The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method ( n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal-Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups ( P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group ( P < 0.001), while there was no significant difference between the two other groups ( P = 0.54). CAD/CAM group required significantly more adjustments ( P < 0.001). CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations.

The Applicability of Standard Error of Measurement and Minimal Detectable Change to Motor Learning Research-A Behavioral Study.

PubMed

Furlan, Leonardo; Sterr, Annette

2018-01-01

Motor learning studies face the challenge of differentiating between real changes in performance and random measurement error. While the traditional p -value-based analyses of difference (e.g., t -tests, ANOVAs) provide information on the statistical significance of a reported change in performance scores, they do not inform as to the likely cause or origin of that change, that is, the contribution of both real modifications in performance and random measurement error to the reported change. One way of differentiating between real change and random measurement error is through the utilization of the statistics of standard error of measurement (SEM) and minimal detectable change (MDC). SEM is estimated from the standard deviation of a sample of scores at baseline and a test-retest reliability index of the measurement instrument or test employed. MDC, in turn, is estimated from SEM and a degree of confidence, usually 95%. The MDC value might be regarded as the minimum amount of change that needs to be observed for it to be considered a real change, or a change to which the contribution of real modifications in performance is likely to be greater than that of random measurement error. A computer-based motor task was designed to illustrate the applicability of SEM and MDC to motor learning research. Two studies were conducted with healthy participants. Study 1 assessed the test-retest reliability of the task and Study 2 consisted in a typical motor learning study, where participants practiced the task for five consecutive days. In Study 2, the data were analyzed with a traditional p -value-based analysis of difference (ANOVA) and also with SEM and MDC. The findings showed good test-retest reliability for the task and that the p -value-based analysis alone identified statistically significant improvements in performance over time even when the observed changes could in fact have been smaller than the MDC and thereby caused mostly by random measurement error, as opposed to by learning. We suggest therefore that motor learning studies could complement their p -value-based analyses of difference with statistics such as SEM and MDC in order to inform as to the likely cause or origin of any reported changes in performance.

Management of Chronic Periodontitis Using Chlorhexidine Chip and Diode Laser-A Clinical Study

PubMed Central

Ambooken, Majo; Mathew, Jayan Jacob; Issac, Annie Valayil; Kunju, Ajithkumar Parachalil; Parameshwaran, Renjith Athirkandathil

2016-01-01

Introduction The use of adjuncts like chlorhexidine local delivery and diode laser decontamination have been found to improve the clinical outcomes of scaling and root planing in non-surgical periodontal therapy in patients with chronic periodontitis. Aim To evaluate the effects of diode laser and chlorhexidine chip as adjuncts to scaling and root planing in the management of chronic periodontitis. The objective is to evaluate the outcome of chlorhexidine chip and diode laser as adjuncts to scaling and root planing on clinical parameters like Plaque Index, Gingival Index, probing pocket depth and clinical attachment level. Study and Design Department of Periodontics. Randomized clinical trial with split mouth design. Materials and Methods Fifteen chronic periodontitis patients having a probing pocket depth of 5mm-7mm on at least one interproximal site in each quadrant of the mouth were included in the study. After initial treatment, four sites in each patient were randomly subjected to scaling and root planing (control), chlorhexidine chip application (CHX chip group), diode laser (810 nm) decontamination (Diode laser group) or combination of both (Diode laser and chip group). Plaque Index (PI), Gingival Index (GI), probing pocket depth (PPD) and clinical attachment level (CAL) were assessed at baseline, one month and three months. Statistical analysis Results were statistically analysed using paired T test, one-way ANOVA, Tukey’s HSD test and repeated measure ANOVA. Results Post-treatment, the test and control sites showed a statistically significant reduction in PI, GI, PPD, and CAL. After three months, a mean PPD reduction of 1.47±0.52 mm in control group, 1.40±0.83 mm in diode laser group, 2.67±0.62 mm in CHX group, and 2.80± 0.77 mm in combination group was seen. The mean gain in CAL were 1.47±0.52 mm in the control group, 1.40±0.83 mm in diode laser group, 2.67± 0.49 mm in CHX group and 2.67± 0.82 mm in combination group respectively. The differences in PPD reduction and CAL gain between control group and CHX chip and combination groups were statistically significant (p<0.05) at three months, whereas, the diode laser group did not show any significant difference from the control group. Conclusion Chlorhexidine local delivery alone or in combination with diode laser decontamination is effective in reducing probing pocket depth and improving clinical attachment levels when used as adjuncts to scaling and root planing in non-surgical periodontal therapy of patients with chronic periodontitis. PMID:27190958

[Characteristics of particulate matter pollution in coke oven plant].

PubMed

Deng, Hua-xin; Zhang, Wang-zhen; Huang, Kun; He, Yun-feng; Li, Xiao-hai; Kuang, Dan; Lin, Da-feng; Zhang, Xiao-min; Wu, Tang-chun

2012-12-01

To explore the characteristics of particulate matter pollution in coke oven plant, so as to provide scientific data for establishing occupational exposure limits for coke oven emissions. Concentrations of CO, SO₂, BSM, BTEX (concentrations of benzene, toluene and xylene were determined in this study), PM₁₀, PM₂.₅, 16 selected PAHs in PM₁₀ and PM₂.₅ were determined in the work environment of a coke oven plant in Wuhan. The work environment was divided into the adjunct area, the bottom of, the side of and the top of coke oven. The concentrations of CO, SO₂, BSM, BETX, PM₁₀, PM₂.₅, PAHs in PM₁₀ and PM₂.₅ were significantly related to working environmental categories, respectively, and were increasing as the adjunct area < bottom < side < top (P (trend) < 0.05). PM₁₀ was statistically significantly correlated with CO, SO₂, benzene, BTEX and BSM (0.705, 0.823, 0.664, 0.624 and 0.734, respectively). PM₂.₅ was statistically significantly correlated with CO, SO₂, benzene, BTEX and BSM (0.635, 0.916, 0. 680, 0.553 and 0.726, respectively). BSM was statistically significantly correlated with benzene (0.689). The ratios of PM₂.₅ to PM₁₀ between different work environments were not significantly different in one-way ANOVA (P > 0.05). The distribution of aromatic rings and the concentrations of total benzo[a] pyrene equivalents in PM₁₀ and PM₂.₅ were not statistically different between work environments. The concentrations of particulate matter was related with other contents of coke oven emissions in coke work environment, and the contents and types of PAHs in PM₁₀ and PM₂.₅ were similar.

[Correlation of adverse childhood experiences with psychiatric disorders and aggressiveness in adulthood].

PubMed

Samardzić, Ljiljana; Nikolić, Gordana; Grbesa, Grozdanko; Simonović, Maja; Milenković, Tatjana

2010-08-01

Consequences of individual adverse childhood experiences for adult mental health have been precisely studied during past decades. The focus of past research was mainly on childhood maltreatment and neglect. The aim of this paper was to determine association between multiple adverse childhood experiences and psychiatric disorders, as well as their correlation to the degree and type of aggressiveness in adult psychiatric patients. One hundred and thirteen psychiatric outpatients were divided into three diagnostic groups: psychotics, non-psychotics and alcoholics and compared with fourty healthy individuals. Adverse childhood experiences data were gathered retrospectively, using the Adverse childhood experiences questionnaire and explanatory interview. Aggressiveness was assessed using Buss-Perry Aggression Questionnaire. The Student's t test, ANOVA and correlational analysis were used for evaluation of statistical significance of differences among the groups. A value p < 0.05 was considered statistically significant. Our results showed that the mean number of adverse childhood experiences in each group of psychiatric patients, as well as in the whole group of patients, was statistically significantly higher than in the group of healthy individuals (p < 0.001); there was a statistically significant difference in score of physical aggressiveness between the patients exposed to adverse childhood experiences and those who were not exposed to them (p < 0.05); scores of physical aggressiveness were in positive correlation with the number of adverse childhood experiences (p < 0.05). The highest mean score of adverse childhood experiences was evidenced in the group of patients with psychotic disorders. Multiple adverse childhood experiences are significantly associated with psychotic disorders, nonpsychotic disorders and alcohol dependence in adulthood and their presence is important morbidity risk factor for psychiatric disorders. They are in positive correlation with physical aggressiveness of the patients from these diagnostic groups.

Three-dimensional accuracy of different correction methods for cast implant bars

PubMed Central

Kwon, Ji-Yung; Kim, Chang-Whe; Lim, Young-Jun; Kwon, Ho-Beom

2014-01-01

PURPOSE The aim of the present study was to evaluate the accuracy of three techniques for correction of cast implant bars. MATERIALS AND METHODS Thirty cast implant bars were fabricated on a metal master model. All cast implant bars were sectioned at 5 mm from the left gold cylinder using a disk of 0.3 mm thickness, and then each group of ten specimens was corrected by gas-air torch soldering, laser welding, and additional casting technique. Three dimensional evaluation including horizontal, vertical, and twisting measurements was based on measurement and comparison of (1) gap distances of the right abutment replica-gold cylinder interface at buccal, distal, lingual side, (2) changes of bar length, and (3) axis angle changes of the right gold cylinders at the step of the post-correction measurements on the three groups with a contact and non-contact coordinate measuring machine. One-way analysis of variance (ANOVA) and paired t-test were performed at the significance level of 5%. RESULTS Gap distances of the cast implant bars after correction procedure showed no statistically significant difference among groups. Changes in bar length between pre-casting and post-correction measurement were statistically significance among groups. Axis angle changes of the right gold cylinders were not statistically significance among groups. CONCLUSION There was no statistical significance among three techniques in horizontal, vertical and axial errors. But, gas-air torch soldering technique showed the most consistent and accurate trend in the correction of implant bar error. However, Laser welding technique, showed a large mean and standard deviation in vertical and twisting measurement and might be technique-sensitive method. PMID:24605205

Cutting efficiency of four different rotary nickel: Titanium instruments

PubMed Central

Cecchin, Doglas; de Sousa-Neto, Manoel Damião; Pécora, Jesus Djalma; Gariba-Silva, Ricardo

2011-01-01

Aim: The aim of this study was to evaluate the cutting efficiency of rotary nickel-titanium (NiTi) instruments K3, NiTi Tee, Profile, and Quantec with taper size 04/25. Materials and Methods: The number of samples was 10 for each group (n = 10). The cutting efficiency was measured by the mass loss from each acrylic resin block after instrumentation of a simulated canal using the Crown-down technique. Results: The analysis of variance (ANOVA) showed that there was a statistically significant difference among the studied groups. The Tukey's test showed that the acrylic resin blocks prepared with instruments K3 (0.00369 ± 0.00022), NiTi Tee (0.00368 ± 0.00023), and Profile (0.00351 ± 0.00026) presented the greatest mass loss, showing no statistically significant difference among them (P < 0.05). The lowest mass loss was found in the blocks prepared with Quantec instruments (0.00311 ± 0.0003) (P < 0.05). Conclusions: It could be concluded that the K3, NiTi Tee, and Profile instruments presented a greater cutting efficiency than the Quantec instruments. PMID:21814349

[The Relationships among Perceived Parental Bonding, Illness Perception, and Anxiety in Adult Patients with Congenital Heart Diseases].

PubMed

Shin, Nayeon; Jang, Youha; Kang, Younhee

2017-04-01

The purposes of this study were to identify the relationships among perceived parental bonding, illness perception, and anxiety and to determine the influences of perceived parental bonding and illness perception on anxiety in adult patients with congenital heart diseases. In this study a descriptive correlational design with survey method was utilized. The participants were 143 adult patients with congenital heart disease being cared for in the cardiology out-patient clinic of A medical center. Data were collected using the Parental Bonding Instrument, Illness Perception Questionnaire Revised Scale, and Cardiac Anxiety Questionnaire Scale. Data were analyzed using descriptive statistics, independent t-test, one-way ANOVA, Pearson correlation analysis, and hierarchial regression analyses. There showed significant positive relationships of anxiety with maternal overprotection, consequences, and personal control respectively. Among predictors, maternal overprotection (β=.45), consequence (β=.26), and personal control (β=-.03) had statistically significant influence on anxiety. Nursing interventions to decrease maternal overprotection and negative consequence, and to enhance personal control are essential to decrease the anxiety of adult patients with congenital heart diseases. © 2017 Korean Society of Nursing Science

Depression, anxiety and adjustment in renal replacement therapy: a quality of life assessment.

PubMed

Zimmermann, P R; Poli de Figueiredo, C E; Fonseca, N A

2001-11-01

To measure the quality of life (QOL) of patients on RRT with regard to depression, anxiety, and adjustment to illness. The study was conducted between 1996 and 1998 at a teaching hospital in Porto Alegre, Brazil. The study population included 125 patients (transplant n = 64, hemodialysis n = 42 and continuous ambulatory peritoneal dialysis [CAPD] n = 19). The Beck Depression Inventory (BDI), the State-Trait Anxiety Inventory (STAI), and the Psychosocial Adjustment to Illness Scale (PAIS) were used for patient assessment. Results were analyzed using the Kruskall-Wallis, Mann-Whitney and ANOVA tests. Depression scores were higher for hemodialysis patients compared with transplant patients (H = 15.22; p < 0.005). CAPD patients had intermediate scores (no statistical difference). As far as anxiety was concerned, no statistical difference was observed when the groups were compared. In terms of adjustment to illness, hemodialysis patients were significantly less well adjusted than transplant patients (H = 23.34; p < 0.001). Patients on CAPD had intermediate scores, with no significant difference compared with the other two groups. The overall quality of life of transplant patients is higher than that of hemodialysis patients.

Effect of overglazed and polished surface finishes on the compressive fracture strength of machinable ceramic materials.

PubMed

Asai, Tetsuya; Kazama, Ryunosuke; Fukushima, Masayoshi; Okiji, Takashi

2010-11-01

Controversy prevails over the effect of overglazing on the fracture strength of ceramic materials. Therefore, the effects of different surface finishes on the compressive fracture strength of machinable ceramic materials were investigated in this study. Plates prepared from four commercial brands of ceramic materials were either surface-polished or overglazed (n=10 per ceramic material for each surface finish), and bonded to flat surfaces of human dentin using a resin cement. Loads at failure were determined and statistically analyzed using two-way ANOVA and Bonferroni test. Although no statistical differences in load value were detected between polished and overglazed groups (p>0.05), the fracture load of Vita Mark II was significantly lower than those of ProCAD and IPS Empress CAD, whereas that of IPS e.max CAD was significantly higher than the latter two ceramic materials (p<0.05). It was concluded that overglazed and polished surfaces produced similar compressive fracture strengths irrespective of the machinable ceramic material tested, and that fracture strength was material-dependent.

Approximate Entropy in the Electroencephalogram During Wake and Sleep

PubMed Central

Burioka, Naoto; Miyata, Masanori; Cornélissen, Germaine; Halberg, Franz; Takeshima, Takao; Kaplan, Daniel T.; Suyama, Hisashi; Endo, Masanori; Maegaki, Yoshihiro; Nomura, Takashi; Tomita, Yutaka; Nakashima, Kenji; Shimizu, Eiji

2006-01-01

Entropy measurement can discriminate among complex systems, including deterministic, stochastic and composite systems. We evaluated the changes of approximate entropy (ApEn) in signals of the electroencephalogram (EEG) during sleep. EEG signals were recorded from eight healthy volunteers during nightly sleep. We estimated the values of ApEn in EEG signals in each sleep stage. The ApEn values for EEG signals (mean ± SD) were 0.896 ± 0.264 during eyes-closed waking state, 0.738 ± 0.089 during Stage I, 0.615 ± 0.107 during Stage II, 0.487 ± 0.101 during Stage III, 0.397 ± 0.078 during Stage IV and 0.789 ± 0.182 during REM sleep. The ApEn values were found to differ with statistical significance among the six different stages of consciousness (ANOVA, p<0.001). ApEn of EEG was statistically significantly lower during Stage IV and higher during wake and REM sleep. We conclude that ApEn measurement can be useful to estimate sleep stages and the complexity in brain activity. PMID:15683194

[Waist-hip ratio and perioperative bleeding in patients who underwent radical prostatectomy].

PubMed

León-Ramírez, Víctor; Santiago-López, Janaí; Reyes-Rivera, Juan Gabriel; Miguel-Soto, Edgar

2016-01-01

Radical prostatectomy is associated with perioperative bleeding and multiple transfusions. Abdominal obesity is a perioperative risk factor. We suggest that the adipocytes have a protective effect in oncological patients undergoing radical prostatectomy. The aim was to evaluate the effect of waist-hip ratio (WHR) on the amount of bleeding and perioperative transfusion requirements in oncological patients undergoing radical prostatectomy. We performed a cohort study in 156 patients. We had two groups: the control group (WHR<0.95) and the problem group (WHR≥0.95). Blood loss and fractions transfused during surgery and in the postoperative period were recorded. In the analysis of variables, for descriptive statistics we used measures of central tendency and dispersion. Inferential statistics was obtained by chi square, Student's t test, Mann-Whitney U and ANOVA. A p<0.05 was significant. We found significant differences in weight, body mass index, waist, WHR, perioperative bleeding, fractions transfused, permanence of the catheter, and hospital days. Patients who underwent radical prostatectomy with a WHR≥0.95 had a magnitude of perioperative bleeding and transfusion requirements with a WHR<0.95.

Position-dependent effects of locked nucleic acid (LNA) on DNA sequencing and PCR primers

PubMed Central

Levin, Joshua D.; Fiala, Dean; Samala, Meinrado F.; Kahn, Jason D.; Peterson, Raymond J.

2006-01-01

Genomes are becoming heavily annotated with important features. Analysis of these features often employs oligonucleotides that hybridize at defined locations. When the defined location lies in a poor sequence context, traditional design strategies may fail. Locked Nucleic Acid (LNA) can enhance oligonucleotide affinity and specificity. Though LNA has been used in many applications, formal design rules are still being defined. To further this effort we have investigated the effect of LNA on the performance of sequencing and PCR primers in AT-rich regions, where short primers yield poor sequencing reads or PCR yields. LNA was used in three positional patterns: near the 5′ end (LNA-5′), near the 3′ end (LNA-3′) and distributed throughout (LNA-Even). Quantitative measures of sequencing read length (Phred Q30 count) and real-time PCR signal (cycle threshold, CT) were characterized using two-way ANOVA. LNA-5′ increased the average Phred Q30 score by 60% and it was never observed to decrease performance. LNA-5′ generated cycle thresholds in quantitative PCR that were comparable to high-yielding conventional primers. In contrast, LNA-3′ and LNA-Even did not improve read lengths or CT. ANOVA demonstrated the statistical significance of these results and identified significant interaction between the positional design rule and primer sequence. PMID:17071964

Effect of light aging on silicone-resin bond strength in maxillofacial prostheses.

PubMed

Polyzois, Gregory; Pantopoulos, Antonis; Papadopoulos, Triantafillos; Hatamleh, Muhanad

2015-04-01

The aim of this study was to investigate the effect of accelerated light aging on bond strength of a silicone elastomer to three types of denture resin. A total of 60 single lap joint specimens were fabricated with auto-, heat-, and photopolymerized (n = 20) resins. An addition-type silicone elastomer (Episil-E) was bonded to resins treated with the same primer (A330-G). Thirty specimens served as controls and were tested after 24 hours, and the remaining were aged under accelerated exposure to daylight for 546 hours (irradiance 765 W/m(2) ). Lap shear joint tests were performed to evaluate bond strength at 50 mm/min crosshead speed. Two-way ANOVA and Tukey's test were carried out to detect statistical significance (p < 0.05). ANOVA showed that the main effect of light aging was the most important factor determining the shear bond strength. The mean bond strength values ranged from 0.096 to 0.136 MPa. The highest values were recorded for auto- (0.131 MPa) and photopolymerized (0.136 MPa) resins after aging. Accelerated light aging for 546 hours affects the bond strength of an addition-type silicone elastomer to three different denture resins. The bond strength significantly increased after aging for photo- and autopolymerized resins. All the bonds failed adhesively. © 2014 by the American College of Prosthodontists.

Factors affecting the distribution and prevalence of oral mucosal lesions in complete denture wearers.

PubMed

Mandali, Gamze; Sener, Işıl Damla; Turker, Sebnem Begum; Ulgen, Hasan

2011-06-01

To determine the frequency of the oral lesions related to gender, age, the length of time of denture usage, education level and economic status. The 153 patients with old complete dentures (CD) were asked to participate in the investigation. The subjects (76 male and 77 female) were 37-85 years of age with a mean age of 61.8 ± 9.8 years. Education, economic status and age factors were estimated in subgroups. The data obtained were evaluated by one-way anova, Mann-Whitney U-test, Kruskal-Wallis test, Student's t-test and chi-squared test. The level of statistical significance was set at p<0.05. The patients who had denture stomatitis and traumatic ulcers were statistically significantly older than the ones who did not have these lesions (p<0.05). Based on the length of denture usage, patients who had a flabby ridge, fibrous inflammatory hyperplasia, traumatic ulcers (p<0.01) and denture stomatitis (p<0.05) were using their dentures statistically significantly longer than the ones who had healthy tissues. The CD wearers should be advised to visit their dentist regularly to prevent oral mucosal lesions due to the changing supporting tissues during the length of denture usage and to improve their quality of life. © 2010 The Gerodontology Society and John Wiley & Sons A/S.

Biomechanical evaluation of oversized drilling technique on primary implant stability measured by insertion torque and resonance frequency analysis

PubMed Central

Santamaría-Arrieta, Gorka; Brizuela-Velasco, Aritza; Fernández-González, Felipe J.; Chávarri-Prado, David; Chento-Valiente, Yelko; Solaberrieta, Eneko; Diéguez-Pereira, Markel; Yurrebaso-Asúa, Jaime

2016-01-01

Background This study evaluated the influence of implant site preparation depth on primary stability measured by insertion torque and resonance frequency analysis (RFA). Material and Methods Thirty-two implant sites were prepared in eight veal rib blocks. Sixteen sites were prepared using the conventional drilling sequence recommended by the manufacturer to a working depth of 10mm. The remaining 16 sites were prepared using an oversize drilling technique (overpreparation) to a working depth of 12mm. Bone density was determined using cone beam computerized tomography (CBCT). The implants were placed and primary stability was measured by two methods: insertion torque (Ncm), and RFA (implant stability quotient [ISQ]). Results The highest torque values were achieved by the conventional drilling technique (10mm). The ANOVA test confirmed that there was a significant correlation between torque and drilling depth (p<0.05). However, no statistically significant differences were obtained between ISQ values at 10 or 12 mm drilling depths (p>0.05) at either measurement direction (cortical and medullar). No statistical relation between torque and ISQ values was identified, or between bone density and primary stability (p >0.05). Conclusions Vertical overpreparation of the implant bed will obtain lower insertion torque values, but does not produce statistically significant differences in ISQ values. Key words:Implant stability quotient, overdrilling, primary stability, resonance frequency analysis, torque. PMID:27398182

Music intervention to prevent delirium among older patients admitted to a trauma intensive care unit and a trauma orthopaedic unit.

PubMed

Johnson, Kari; Fleury, Julie; McClain, Darya

2018-08-01

Evaluate music listening for delirium prevention among patients admitted to a Trauma Intensive Care and Trauma Orthopaedic Unit. The Roy Adaptation Model provided the theoretical framework focusing on modifying contextual stimuli. Randomised controlled trial, 40 patients aged 55 and older. Participants randomly assigned to receive music listening or usual care for 60 minutes, twice a day, over three days. Pre-recorded self-selected music using an iPod and headsets, with slow tempo, low pitch and simple repetitive rhythms to alter physiologic responses. Heart rate, respiratory rate, systolic and diastolic blood pressure, confusion assessment method. Repeated measures ANOVA, F(4, 134) = 4.75, p = .001, suggested statistically significant differences in heart rate pre/post music listening, and F(1, 37) = 10.44, p = .003 in systolic blood pressure pre/post music listening. Post-hoc analysis reported changes at three time periods of statistical significance; (p = .010), (p = .005) and (p = .039) and a change in systolic blood pressure pre/post music listening; (p = .001) of statistical significance. All participants screened negative for delirium. Music addresses pathophysiologic mechanisms that contribute to delirium; neurotransmitter imbalance, inflammation and acute physiologic stressors. Music to prevent delirium is one of few that provide support in a critical care setting. Copyright © 2018 Elsevier Ltd. All rights reserved.

Single-row, double-row, and transosseous equivalent techniques for isolated supraspinatus tendon tears with minimal atrophy: A retrospective comparative outcome and radiographic analysis at minimum 2-year followup

PubMed Central

McCormick, Frank; Gupta, Anil; Bruce, Ben; Harris, Josh; Abrams, Geoff; Wilson, Hillary; Hussey, Kristen; Cole, Brian J.

2014-01-01

Purpose: The purpose of this study was to measure and compare the subjective, objective, and radiographic healing outcomes of single-row (SR), double-row (DR), and transosseous equivalent (TOE) suture techniques for arthroscopic rotator cuff repair. Materials and Methods: A retrospective comparative analysis of arthroscopic rotator cuff repairs by one surgeon from 2004 to 2010 at minimum 2-year followup was performed. Cohorts were matched for age, sex, and tear size. Subjective outcome variables included ASES, Constant, SST, UCLA, and SF-12 scores. Objective outcome variables included strength, active range of motion (ROM). Radiographic healing was assessed by magnetic resonance imaging (MRI). Statistical analysis was performed using analysis of variance (ANOVA), Mann — Whitney and Kruskal — Wallis tests with significance, and the Fisher exact probability test <0.05. Results: Sixty-three patients completed the study requirements (20 SR, 21 DR, 22 TOE). There was a clinically and statistically significant improvement in outcomes with all repair techniques (ASES mean improvement P = <0.0001). The mean final ASES scores were: SR 83; (SD 21.4); DR 87 (SD 18.2); TOE 87 (SD 13.2); (P = 0.73). There was a statistically significant improvement in strength for each repair technique (P < 0.001). There was no significant difference between techniques across all secondary outcome assessments: ASES improvement, Constant, SST, UCLA, SF-12, ROM, Strength, and MRI re-tear rates. There was a decrease in re-tear rates from single row (22%) to double-row (18%) to transosseous equivalent (11%); however, this difference was not statistically significant (P = 0.6). Conclusions: Compared to preoperatively, arthroscopic rotator cuff repair, using SR, DR, or TOE techniques, yielded a clinically and statistically significant improvement in subjective and objective outcomes at a minimum 2-year follow-up. Level of Evidence: Therapeutic level 3. PMID:24926159

Cytocompatibility, cytotoxicity and genotoxicity analysis of dental implants

NASA Astrophysics Data System (ADS)

Reigosa, M.; Labarta, V.; Molinari, G.; Bernales, D.

2007-11-01

Several types of materials are frequently used for dental prostheses in dental medicine. Different treatments with titanium are the most used. The aim of the present study was to analyze by means of cytotoxicity and cytocompatibility techniques the capacity of dental implants to integrate to the bone tissue. Cultures of UMR 106 cell line derived from an osteosarcoma were used for bioassays mainly because they show many of the properties of osteoblasts. Dental implant samples provided by B&W company were compared with others of recognized trademarks. The first ones contain ASTM titanium (8348 GR2) with acid printing. Cytotoxicity was analyzed by means of lysosome activity, using the neutral red technique and alkaline phosphatase enzyme activity. Cell variability was determined by means of the acridine ethidium-orange bromide technique. One-way ANOVA and Bonferroni and Duncan post-ANOVA tests were used for the statistical analysis. The assays did not show significant differences among the dental implants analyzed. Our findings show that the dental prostheses studied present high biocompatibility, quantified by the bioassays performed. The techniques employed revealed that they can be a useful tool for the analysis of other materials for dental medicine use.

Influence of translucence/opacity and shade in the flexural strength of lithium disilicate ceramics

PubMed Central

Santos, Mila Oliveira; do Amaral, Flávia Lucisano Botelho; França, Fabiana Mantovani Gomes; Basting, Roberta Tarkany

2015-01-01

Background: Lithium disilicate ceramic system consists of glass ceramic ingots with different grades of translucence which may influence its flexural strength. Aims: To assess the three-point flexural strength of the different lithium disilicate-based ceramic ingots (IPS e.max Press/Ivoclar Vivadent) with different levels of translucence and shade. Materials and Methods: Six groups of ceramic ingots were selected to represent different levels of translucence and shade (HTA1, HTBL2, LTA2, LTB2, MO2, and HO). They measured 25 mm × 5 mm × 2 mm (n = 10), according to ISO 6872 specifications, and tested on a universal test machine (EMIC). Statistical Analysis Used: A one-way analysis of variance (ANOVA) was used (α = 0.05). Results: The results (in MPa) were: HTA1 = 392.98; HTBL2 = 390.74; LTA2 = 390.46; LTB2 = 389.92; MO2 = 390.43; HO = 391.96. ANOVA showed no significant difference among groups (P = 0.1528). Conclusions: Different levels of translucence, opacity and shade of ingots did not affect their mechanical strength, and the use of these ceramics should be guided by the esthetic demands of each clinical situation. PMID:26430304

Rapid development of xylanase assay conditions using Taguchi methodology.

PubMed

Prasad Uday, Uma Shankar; Bandyopadhyay, Tarun Kanti; Bhunia, Biswanath

2016-11-01

The present investigation is mainly concerned with the rapid development of extracellular xylanase assay conditions by using Taguchi methodology. The extracellular xylanase was produced from Aspergillus niger (KP874102.1), a new strain isolated from a soil sample of the Baramura forest, Tripura West, India. Four physical parameters including temperature, pH, buffer concentration and incubation time were considered as key factors for xylanase activity and were optimized using Taguchi robust design methodology for enhanced xylanase activity. The main effect, interaction effects and optimal levels of the process factors were determined using signal-to-noise (S/N) ratio. The Taguchi method recommends the use of S/N ratio to measure quality characteristics. Based on analysis of the S/N ratio, optimal levels of the process factors were determined. Analysis of variance (ANOVA) was performed to evaluate statistically significant process factors. ANOVA results showed that temperature contributed the maximum impact (62.58%) on xylanase activity, followed by pH (22.69%), buffer concentration (9.55%) and incubation time (5.16%). Predicted results showed that enhanced xylanase activity (81.47%) can be achieved with pH 2, temperature 50°C, buffer concentration 50 Mm and incubation time 10 min.

Retrospective Evaluation of the Impact of a Geriatric Trauma Institute on Fragility Hip Fracture Patient Outcomes.

PubMed

Katrancha, Elizabeth D; Zipf, Jami; Abrahams, Nancy; Schroeder, Richard

Fragility hip fractures occur in the older than 65-year population at an alarming rate. It is estimated that 260,000 hip fractures occur annually. Patient outcomes following hip fractures are devastating. One of every 5 patients dies within 1 year of injury, and 1 of 3 remains in a nursing home for years after the injury. Published literature recommends an interdisciplinary approach to caring for hip-fractured patients and expediting surgery to improve outcomes. The purpose of this study was to retrospectively evaluate the impact of the Geriatric Trauma Institute (GTI) on fragility hip fracture patient outcomes. Specific outcomes included length of stay (LOS), length of time from emergency department (ED) arrival to operating room (OR), complication rate, and discharge destination. This study is a single-center pre- and post-retrospective chart review. Data were collected using database queries within the hospital system. Pre-GTI (n = 326) patients older than 65 years with International Classification of Disease, Ninth Revision (ICD-9) codes 820.0-820.9 (hip fractures) admitted to either a primary care physician or orthopaedic surgeon service between April 1, 2011, and April 1, 2013, were compared with post-GTI (n = 245) patients older than 65 years with ICD-9 codes 820.0-820.9 (hip fractures) admitted to trauma services (GTI) between May 1, 2013, and May 1, 2015. Descriptive statistics including demographic data (age, sex) and comparison of outcomes (LOS, ED to OR time, complications, and disposition) across the groups using standard analysis of variance (ANOVA) and correlation techniques. No statistical difference was found between groups for age, sex, or time from ED to OR pre- versus post-time period using one-way ANOVA, F(1,569) = 1.08, p = .30. The complication rate was calculated pre- and post-GTI and compared using the 2-proportion z-test. The difference between the pre-GTI group (16.6%; 54 of 326 patients) and the post-GTI group (9.4%; 23 of 245 patients) was statistically significant, p = .013. Mean LOS was statistically significantly higher in the pre-GTI group (M = 5) than in the post-GTI group (M = 5.2), U = 33,55, z = -3.32, p = .001. No statistical significance was found between pre- and postdischarge destination, χ(4) = .4.82, p = .307; likelihood ratio test, χ(4) = .5.19, p = .269. This retrospective pre- and post-GTI chart review demonstrates the effectiveness of a multidisciplinary team approach in decreasing complications and LOS for fragility hip-fractured patients. A team approach to the care of these patients improves outcomes and quality of life.

Smile esthetics: age related changes, and objective differences between social and spontaneous smiles.

PubMed

Dindaroğlu, Furkan; Doğan, Servet; Erdinç, Ashhan M Ertan

2011-01-01

To evaluate the importance of age in orthodontic treatment by studying the dependence of smile and resting parameters on age and to expose differences between social and spontaneous smiles. Subjects consisted of 67 individuals aged between 17 and 55. The video recordings were transferred to a computer 200 still frames were captured for each individual 50 were captured in resting position, 50 during speech, 50for social, and 50for spontaneous smiles. One picture was selectedfrom each group based on how pictures reflected the desired point ANOVA and Scheffe Post-hoc tests were performed on smile measurements. In all the resting parameters, statistically significant differences were observed among age groups. Also, the response of these parameters to age differs between men and women. Statistically significant diferences were found in some smile parameters among diferent age groups, for both smile types. We find significant differences between social and spontaneous smiles. Age related alterations should be taken into consideration during treatment planning, especially in women. Due to its high consistency, there are advantages with using a spontaneous smile in soft-hard tissue evaluations. We also emphasize the necessity to take dynamic registrations for a true functional evaluation.

Effect of bleaching on color change and surface topography of composite restorations.

PubMed

Pruthi, Gunjan; Jain, Veena; Kandpal, H C; Mathur, Vijay Prakash; Shah, Naseem

2010-01-01

This study was conducted to determine the effect of 15% carbamide peroxide bleaching agent on color change and surface topography of different composite veneering materials (Filtek Z350 (3M ESPE), Esthet X (Dentsply India), and Admira (Voco, Germany). Methods. 30 samples were fabricated for evaluation of color change using CIELAB color system and Gonioreflectometer (GK 311/M, ZEISS). 45 disc-shaped specimens were made for evaluation of surface topography after bleaching (Nupro White Gold; Dentsply) using SEM. Statistical analysis. One way ANOVA and Multiple comparison tests were used to analyze the data. Statistical significance was declared if the P value was .05 or less. Results and conclusion. All the specimens showed significant discoloration (ΔE > 3.3) after their immersion in solutions representing food and beverages. The total color change after bleaching as compared to baseline color was significant in Filtek Z350 (P = .000) and Esthet X (P = .002), while it was insignificant for Admira (P = .18). Esthet X showed maximum surface roughness followed by Admira and Filtek Z350. Bleaching was effective in reducing the discoloration to a clinically acceptable value in all the three groups (ΔE < 3.3).

Empirical study of alginate impression materials by customized proportioning system

PubMed Central

2016-01-01

PURPOSE Alginate mixers available in the market do not have the automatic proportioning unit. In this study, an automatic proportioning unit for the alginate mixer and controller software were designed and produced for a new automatic proportioning unit. With this device, it was ensured that proportioning operation could arrange weight-based alginate impression materials. MATERIALS AND METHODS The variation of coefficient in the tested groups was compared with the manual proportioning. Compression tension and tear tests were conducted to determine the mechanical properties of alginate impression materials. The experimental data were statistically analyzed using one way ANOVA and Tukey test at the 0.05 level of significance. RESULTS No statistically significant differences in modulus of elastisity (P>0.3), tensional/compresional strength (P>0.3), resilience (P>0.2), strain in failure (P>0.4), and tear energy (P>0.7) of alginate impression materials were seen. However, a decrease in the standard deviation of tested groups was observed when the customized machine was used. To verify the efficiency of the system, powder and powder/water mixing were weighed and significant decrease was observed. CONCLUSION It was possible to obtain more mechanically stable alginate impression materials by using the custom-made proportioning unit. PMID:27826387

Morphological and biochemical examination of Cosmos 1887 rat heart tissue. Part 1: Ultrastructure

NASA Technical Reports Server (NTRS)

Philpott, D. E.; Popova, I. A.; Kato, K.; Stevenson, J.; Miquel, J.; Sapp, W.

1990-01-01

Morphological changes were observed in the left ventricle of rat heart tissue from animals flown on the Cosmos 1887 biosatellite for 12.5 days. These tissues were compared to the synchronous and vivarium control hearts. While many normal myofibrils were observed, others exhibited ultrastructural alterations, i.e., damaged and irregular-shaped mitochondria and generalized myofibrillar edema. Analysis of variance (ANOVA) of the volume density data revealed a statistically significant increase in glycogen and a significant decrease in mitochondria compared to the synchronous and vivarium controls. Point counting indicated an increase in lipid and myeloid bodies and a decrease in microtubules, but these changes were not statistically significant. In addition, the flight animals exhibited some patchy loss of protofibrils (actin and myosin filaments) and some abnormal supercontracted myofibrils that were not seen in the controls. This study was undertaken to gain insight into the mechanistic aspects of cardiac changes in both animals and human beings as a consequence of space travel. Cardiac hypotrophy and fluid shifts have been observed after actual or simulated weightlessness and raise concerns about the functioning of the heart and circulatory system during and after travel in space.

Correlation of cardiorespiratory fitness with risk factors for cardiovascular disease in children with type 1 diabetes mellitus.

PubMed

Miculis, Cristiane P; de Campos, Wagner; Gasparotto, Guilherme S; Silva, Michael P; Mascarenhas, Luis P; Boguszewski, Margaret C S

2012-01-01

The objective of this study was to correlate CRF with cardiovascular risk factors in T1DM children. Fifty children and adolescents aged between 9 and 17 years with no diabetes complications and a mean diabetes duration of 4.6 years were selected. Antropometric, sexual maturation and blood pressure data were evaluated. CRF level was assessed with a 20-m shuttle run test. Laboratory tests were performed to verify fasting lipids and glycated hemoglobin. Statistical analyses were made with Pearson partial correlation, t test, and one-way ANOVA, with p≤0.05. After adjustment for body adiposity and sexual maturity, inverse correlations among CRF and TC, TG, TC/HDL-C, TG/HDL-C, non-HDL-C, and SBP were statistically significant. Variables differing by sex included weight Z score, BMI Z score, skinfold thickness, percentage of body fat, and DBP. Boys had higher CRF compared to girls. CRF and TC differed significantly by sexual maturation status. An inverse and significant relationship between CRF and most lipid profile's components and SBP in poor controlled T1DM children and adolescents was found, independently of body adiposity. Copyright © 2012 Elsevier Inc. All rights reserved.

Improved cellulase production by Botryosphaeria rhodina from OPEFB at low level moisture condition through statistical optimization.

PubMed

Bahrin, E K; Ibrahim, M F; Abd Razak, M N; Abd-Aziz, S; Shah, U K Md; Alitheen, N; Salleh, M Md

2012-01-01

The response surface method was applied in this study to improve cellulase production from oil palm empty fruit bunch (OPEFB) by Botryosphaeria rhodina. An experimental design based on a two-level factorial was employed to screen the significant environmental factors for cellulase production. The locally isolated fungus Botryosphaeria rhodina was cultivated on OPEFB under solid-state fermentation (SSF). From the analysis of variance (ANOVA), the initial moisture content, amount of substrate, and initial pH of nutrient supplied in the SSF system significantly influenced cellulase production. Then the optimization of the variables was done using the response surface method according to central composite design (CCD). Botryosphaeria rhodina exhibited its best performance with a high predicted value of FPase enzyme production (17.95 U/g) when the initial moisture content was at 24.32%, initial pH of nutrient was 5.96, and 3.98 g of substrate was present. The statistical optimization from actual experiment resulted in a significant increment of FPase production from 3.26 to 17.91 U/g (5.49-fold). High cellulase production at low moisture content is a very rare condition for fungi cultured in solid-state fermentation.

Effects of formaldehyde-enriched mists on Pseudotsuga menziesii (Mirbel) Franco and Lobaria pulmonaria (L.) Hoffm.

PubMed

Muir, P S; Shirazi, A M

1996-01-01

The atmosphere in some areas is polluted with formaldehyde (HCHO); however, little is known about effects of HCHO on plants at concentrations resembling those in polluted areas. The effects of simulated fogwater enriched with HCHO on seedlings of Pseudotsuga menziesii (Mirbel) Franco (Douglas fir) and pendants of Lobaria pulmonaria (L.) Hoffm. were assessed. Plants were treated with HCHO-enriched fog (target concentrations of 100, 500, and 1000 microm) during five 4-night mist sessions. Growth and nitrogenase activity (acetylene reduction rate) for lichens and growth and timing of bud-break for Douglas fir were monitored. Nitrogenase activity was lowest in lichens treated at the highest HCHO concentration after all but the first mist session, and it declined significantly with increasing HCHO concentration after the final mist session (R(2) = 0.60, p = 0.02). However, differences in nitrogenase activity among treatments were generally not statistically significant (most p values from ANOVAs were >/= 0.20). Formaldehyde did not affect growth of the lichens. Budbreak of Douglas firs was slightly delayed and height growth was slightly depressed with increasing HCHO concentration, although effects were not statistically significant.

Comparative effects of conjugated linoleic acid (CLA) and linoleic acid (LA) on the oxidoreduction status in THP-1 macrophages.

PubMed

Rybicka, Marta; Stachowska, Ewa; Gutowska, Izabela; Parczewski, Miłosz; Baśkiewicz, Magdalena; Machaliński, Bogusław; Boroń-Kaczmarska, Anna; Chlubek, Dariusz

2011-04-27

The aim of this study was to investigate the effect of conjugated linoleic acids (CLAs) on macrophage reactive oxygen species synthesis and the activity and expression of antioxidant enzymes, catalase (Cat), glutathione peroxidase (GPx), and superoxide dismutase (SOD). The macrophages were obtained from the THP-1 monocytic cell line. Cells were incubated with the addition of cis-9,trans-11 CLA or trans-10,cis-12 CLA or linoleic acid. Reactive oxygen species (ROS) formation was estimated by flow cytometry. Enzymes activity was measured spectrophotometrically. The antioxidant enzyme mRNA expression was estimated by real-time reverse transcriptase polymerase chain reaction (RT-PCR). Statistical analysis was based on nonparametric statistical tests [Friedman analysis of variation (ANOVA) and Wilcoxon signed-rank test]. cis-9,trans-11 CLA significantly increased the activity of Cat, while trans-10,cis-12 CLA notably influenced GPx activity. Both isomers significantly decreased mRNA expression for Cat. Only trans-10,cis-12 significantly influenced mRNA for SOD-2 expression. The CLAs activate processes of the ROS formation in macrophages. Adverse metabolic effects of each isomer action were observed.

Effect of an adhesive resin luting agent on the dowel-head retention of three different core materials.

PubMed

Aksoy, Gokhan; Cotert, H Serdar; Korkut, Levent

2005-05-01

A dowel-and-core restoration may fail due to failure at either the dowel-tooth or dowel head-core material interface. Long-term clinical success of a dowel-and-core restoration depends on retention of both the dowel to the tooth and the dowel head to the core material. Thus, strengthening of the dowel head-core interface is important. This study evaluated the retention between a prefabricated dowel and 3 different core materials with or without a dual-polymerized adhesive resin luting agent. Sixty prefabricated dowels (Gold Plated Anchorage Post) were divided into 3 groups (n=20) consisting of 1 of 3 core materials, amalgam (Standalloy F), light-polymerized resin composite (Clearfil Ray), or glass ionomer (Chelon-Silver). Each core group was divided into 2 subgroups (n=10), and a dual-polymerized adhesive resin luting agent (Panavia F) was applied to the dowel heads of 1 of these subgroups before application of the core material. The manufacturing procedure was standardized by using a plastic index (4.5-mm internal diameter and 5-mm height) and a custom-made dowel holder, which held the dowel head. Prepared specimens were stored in water at room temperature for 3 months and then loaded to fracture in a universal testing machine with a crosshead speed of 0.05 mm/min until failure. Bond strengths were recorded (MPa). Data were analyzed with 2-way analysis of variance (ANOVA) in a 2 x 3 factorial randomized design (alpha=.05). Afterward, core material differences were computed with 1-way ANOVA for both of the bonded and nonbonded groups. Post hoc multiple comparisons were made with the Dunnett C multiple range test. Dowel-head retention values (MPa) of the tested core materials (mean +/- SD) from the highest to the lowest were as follows: bonded amalgam core, 296.1 +/- 108; bonded composite core, 284.3 +/- 38.3; nonbonded composite core, 177.0 +/- 53.7; nonbonded amalgam core, 128.5 +/- 35.0; bonded glass-ionomer core (GIC), 128.0 +/- 24.5; nonbonded GIC, 61.8 +/- 13.3. Two-way ANOVA revealed significant differences between the core material groups and between the bonded and nonbonded groups (P <.001). The interaction between the core material and bond variables was also significant (P =.018). One-way ANOVA revealed statistically significant differences between the bonded (P <.001) and also between the nonbonded core material groups (P <.001). Post hoc multiple comparisons showed that the dowel-head retention of the GIC was significantly weaker than the post-head retention for amalgam and resin composite, whether bonded or not. Within the limitations of this study, the adhesive resin luting agent tested appeared to have a significant strengthening effect on the dowel-head retention of the core materials.

Halogen and LED light curing of composite: temperature increase and Knoop hardness.

PubMed

Schneider, L F; Consani, S; Correr-Sobrinho, L; Correr, A B; Sinhoreti, M A

2006-03-01

This study assessed the Knoop hardness and temperature increase provided by three light curing units when using (1) the manufacturers' recommended times of photo-activation and (2) standardizing total energy density. One halogen--XL2500 (3M/ESPE)--and two light-emitting diode (LED) curing units--Freelight (3M/ESPE) and Ultrablue IS (DMC)--were used. A type-K thermocouple registered the temperature change produced by the composite photo-activation in a mold. Twenty-four hours after the photo-activation procedures, the composite specimens were submitted to a hardness test. Both temperature increase and hardness data were submitted to ANOVA and Tukey's test (5% significance). Using the first set of photo-activation conditions, the halogen unit produced a statistically higher temperature increase than did both LED units, and the Freelight LED resulted in a lower hardness than did the other curing units. When applying the second set of photo-activation conditions, the two LED units produced statistically greater temperature increase than did the halogen unit, whereas there were no statistical differences in hardness among the curing units.

Different modes of data processing and statistical testing applied to the same set of pharmaco-EEG recordings: effects on the evaluation of a selective and reversible MAO A inhibitor (brofaromine).

PubMed

Reimann, I W; Jobert, M; Gleiter, C H; Turri, M; Bieck, P R; Herrmann, W M

1996-01-01

The comparison of two different modes of data processing and two different approaches to statistical testing both applied to the same set of EEG recordings was the main objective of this pharmacological study. Brofaromine (CGP 11,305 A), a new selective and reversible monoamine oxidase type A inhibitor was used as an example for investigating a potentially antidepressant drug in clinical development. The two modes of pharmaco-EEG (PEEG) data processing differed mainly in the sampling frequency and definition of spectral parameters. Patterns of significant changes were noted in terms of descriptive data analysis using either a nonparametric Wilcoxon signed-rank test or an ANOVA of transformed data, as suggested by Conover and Iman. These data clearly demonstrate that slight discrepancies in the results may simply arise from differences in data processing and statistical approach applied. In spite of these discrepancies, the pattern of brofaromine-induced PEEG changes was very similar regardless of the mode of data handling used.

Dielectrophoresis enhances the whitening effect of carbamide peroxide on enamel.

PubMed

Ivanoff, Chris S; Hottel, Timothy L; Garcia-Godoy, Franklin; Riga, Alan T

2011-10-01

To compare the enamel whitening effect of a 20-minute dielectrophoresis enhanced electrochemical delivery to a 20-minute diffusion treatment. Forty freshly extracted human teeth without detectable caries or restoration were stored in distilled water at 4 degrees C and used within 1 month of extraction. Two different bleaching gels (Plus White 5 Minute Speed Whitening Gel and 35% Opalescence PF gel) were tested. The study had two parts: Part 1--Quantitative comparison of hydrogen peroxide (H2O2, HP) absorption--following application of an over-the-counter 35% HP whitening gel (Plus White 5 Minute Speed Whitening Gel) to 30 (n = 30) extracted human teeth by conventional diffusion or dielectrophoresis. The amount of H2O2 that diffused from the dentin was measured by a colorimetric oxidation-reduction reaction kit. HP concentration was measured by UV-Vis spectroscopy at 550 nm. Part 2--HP diffusion in stained teeth--35% carbamide peroxide whitening gel (35% Opalescence PF gel) was applied to 10 extracted human teeth (n = 10) stained by immersion in a black tea solution for 48 hours. The teeth were randomly assigned to the 20-minute dielectrophoresis or diffusion treatment group; whitening was evaluated by a dental spectrophotometer and macro-photography. Part 1: The analysis found significant differences between both groups with relative percent errors of 3% or less (a single outlier had an RPE of 12%). The average absorbance for the dielectrophoresis group in round 1 was 79% greater than the diffusion group. The average absorbance for the dielectrophoresis group in round 2 was 130% greater than the diffusion group. A single-factor ANOVA found a statistically significant difference between the diffusion and dielectrophoresis groups (P = 0.01). Part 2--The average change in Shade Guide Units (SGU) was 0.6 for the diffusion group, well under the error of measurement of 0.82 SGU. The average change in SGU for the dielectrophoresis group was 9, significantly above the error of measurement and 14 times or 1,400% greater than the diffusion group average. A single-factor ANOVA found a statistically significant difference between the diffusion and dielectrophoresis treatment groups (P < 0.001).

Evaluation of setting time and flow properties of self-synthesize alginate impressions

NASA Astrophysics Data System (ADS)

Halim, Calista; Cahyanto, Arief; Sriwidodo, Harsatiningsih, Zulia

2018-02-01

Alginate is an elastic hydrocolloid dental impression materials to obtain negative reproduction of oral mucosa such as to record soft-tissue and occlusal relationships. The aim of the present study was to synthesize alginate and to determine the setting time and flow properties. There were five groups of alginate consisted of fifty samples self-synthesize alginate and commercial alginate impression product. Fifty samples were divided according to two tests, each twenty-five samples for setting time and flow test. Setting time test was recorded in the s unit, meanwhile, flow test was recorded in the mm2 unit. The fastest setting time result was in the group three (148.8 s) and the latest was group fours). The highest flow test result was in the group three (69.70 mm2) and the lowest was group one (58.34 mm2). Results were analyzed statistically by one way ANOVA (α= 0.05), showed that there was a statistical significance of setting time while no statistical significance of flow properties between self-synthesize alginate and alginate impression product. In conclusion, the alginate impression was successfully self-synthesized and variation composition gives influence toward setting time and flow properties. The most resemble setting time of control group is group three. The most resemble flow of control group is group four.

Assessment of the maximum voluntary arm muscle contraction in sign language for the deaf.

PubMed

Regalo, S C H; Teixeira, V R; Vitti, M; Chaves, T C; Hallak, J E C; Bevilaqua-Grossi, D; Siriani de Oliveira, A

2006-01-01

The purpose of this study was to investigate the levels of upper member muscles' activation of deaf individuals, who use the Brazilian sign language - LIBRAS, comparing these findings to volunteers with no postural deviations and normal hearing Forty eight volunteers divided into two groups comprising healthy and deaf subjects (24 volunteers for each group). The signs of rest were obtained with the volunteer maintaining the upper member in an anatomical position, but with the forearm flexed and sustained by the lower member. Maximum voluntary isometric contractions (MVIC) of the biceps, triceps, deltoid, and trapezius muscles were performed in the position of muscular function testing. Statistical analysis was performed using the SPSS-10.0. Continuous data with normal distribution were analyzed by ANOVA with the significance level of p < 0.01. The normalized electromyographic muscle data obtained in muscular rest do not show statistically significant differences among the studies muscles, in both groups. In the comparison of normalized RMS values obtained in MVIC, the mean values for the trapezius muscle of deaf group were statistically lower than control group. This study's results indicate there are no differences between the levels of muscular activation for arm biceps, arm triceps, and the anterior portion of the deltoid muscle between the mean normalized RMS values of deaf and healthy individuals.

Dentascan – Is the Investment Worth the Hype ???

PubMed Central

Shah, Monali A; Shah, Sneha S; Dave, Deepak

2013-01-01

Background: Open Bone Measurement (OBM) and Bone Sounding (BS) are most reliable but invasive clinical methods for Alveolar Bone Level (ABL) assessment, causing discomfort to the patient. Routinely, IOPAs & OPGs are the commonest radiographic techniques used, which tend to underestimate bone loss and obscure buccal/lingual defects. Novel technique like dentascan (CBCT) eliminates this limitation by giving images in 3 planes – sagittal, coronal and axial. Aim: To compare & correlate non-invasive 3D radiographic technique of Dentascan with BS & OBM, and IOPA and OPG, in assessing the ABL. Settings and Design: Cross-sectional diagnostic study. Material and Methods: Two hundred and five sites were subjected to clinical and radiographic diagnostic techniques. Relative distance between the alveolar bone crest and reference wire was measured. All the measurements were compared and tested against the OBM. Statistical Analysis: Student’s t-test, ANOVA, Pearson correlation coefficient. Results: There is statistically significant difference between dentascan and OBM, only BS showed agreement with OBM (p < 0.05). Dentascan weakly correlated with OBM & BS lingually.Rest all techniques showed statistically significant difference between them (p= 0.00). Conclusion: Within the limitations of this study, only BS seems to be comparable with OBM with no superior result of Dentascan over the conventional techniques, except for lingual measurements. PMID:24551722

In Vitro Wear Resistance of Nano-Hybrid Composite Denture Teeth.

PubMed

Munshi, Nabeel; Rosenblum, Marc; Jiang, Shuying; Flinton, Robert

2017-04-01

To evaluate the wear resistance of nano-hybrid composite denture teeth as compared to two commonly used denture teeth: interpenetrating polymer network (IPN) and double crosslinking polymethylmethacrylate (PMMA) denture teeth. 18 styli and 18 disk specimens were prepared from the three denture tooth materials: nano-hybrid composite, IPN, and double crosslinking PMMA. The specimens were mounted in a two-body wear testing machine to simulate chewing in the complete denture. The amount of wear from the styli specimens were measured before and after using a digital micrometer, and the depth of the wear track from the disk specimens was measured using a noncontact 3D optical profilometer. The total wear from each denture tooth group was compared using one-way ANOVA with a 0.05 significance level. A Tukey post hoc test was used to determine differences between the three groups. The mean total wear in the nano-hybrid composite teeth group was 1.16 mm, SD = 0.5 mm, statistically significantly higher (p ≤ 0.0001) than the IPN (mean = 0.13 mm, SD = 0.05) and double crosslinking PMMA tooth groups (mean = 0.31 mm, SD = 0.19). There was no statistically significant difference between IPN denture teeth and double crosslinking PMMA denture teeth in the amount of wear. Nano-hybrid composite denture teeth exhibited statistically significantly more wear than the IPN and double crosslinking PMMA denture teeth. © 2015 by the American College of Prosthodontists.

Accounting for measurement reliability to improve the quality of inference in dental microhardness research: a worked example.

PubMed

Sever, Ivan; Klaric, Eva; Tarle, Zrinka

2016-07-01

Dental microhardness experiments are influenced by unobserved factors related to the varying tooth characteristics that affect measurement reproducibility. This paper explores the appropriate analytical tools for modeling different sources of unobserved variability to reduce the biases encountered and increase the validity of microhardness studies. The enamel microhardness of human third molars was measured by Vickers diamond. The effects of five bleaching agents-10, 16, and 30 % carbamide peroxide, and 25 and 38 % hydrogen peroxide-were examined, as well as the effect of artificial saliva and amorphous calcium phosphate. To account for both between- and within-tooth heterogeneity in evaluating treatment effects, the statistical analysis was performed in the mixed-effects framework, which also included the appropriate weighting procedure to adjust for confounding. The results were compared to those of the standard ANOVA model usually applied. The weighted mixed-effects model produced the parameter estimates of different magnitude and significance than the standard ANOVA model. The results of the former model were more intuitive, with more precise estimates and better fit. Confounding could seriously bias the study outcomes, highlighting the need for more robust statistical procedures in dental research that account for the measurement reliability. The presented framework is more flexible and informative than existing analytical techniques and may improve the quality of inference in dental research. Reported results could be misleading if underlying heterogeneity of microhardness measurements is not taken into account. The confidence in treatment outcomes could be increased by applying the framework presented.

Adaptation and Assessment of Reliability and Validity of the Greek Version of the Ohkuma Questionnaire for Dysphagia Screening

PubMed Central

Papadopoulou, Soultana L.; Exarchakos, Georgios; Christodoulou, Dimitrios; Theodorou, Stavroula; Beris, Alexandre; Ploumis, Avraam

2016-01-01

Introduction The Ohkuma questionnaire is a validated screening tool originally used to detect dysphagia among patients hospitalized in Japanese nursing facilities. Objective The purpose of this study is to evaluate the reliability and validity of the adapted Greek version of the Ohkuma questionnaire. Methods Following the steps for cross-cultural adaptation, we delivered the validated Ohkuma questionnaire to 70 patients (53 men, 17 women) who were either suffering from dysphagia or not. All of them completed the questionnaire a second time within a month. For all of them, we performed a bedside and VFSS study of dysphagia and asked participants to undergo a second VFSS screening, with the exception of nine individuals. Statistical analysis included measurement of internal consistency with Cronbach's α coefficient, reliability with Cohen's Kappa, Pearson's correlation coefficient and construct validity with categorical components, and One-Way Anova test. Results According to Cronbach's α coefficient (0.976) for total score, there was high internal consistency for the Ohkuma Dysphagia questionnaire. Test-retest reliability (Cohen's Kappa) ranged from 0.586 to 1.00, exhibiting acceptable stability. We also estimated the Pearson's correlation coefficient for the test-retest total score, which reached high levels (0.952; p = 0.000). The One-Way Anova test in the two measurement times showed statistically significant correlation in both measurements (p = 0.02 and p = 0.016). Conclusion The adapted Greek version of the questionnaire is valid and reliable and can be used for the screening of dysphagia in the Greek-speaking patients. PMID:28050209

Adaptation and Assessment of Reliability and Validity of the Greek Version of the Ohkuma Questionnaire for Dysphagia Screening.

PubMed

Papadopoulou, Soultana L; Exarchakos, Georgios; Christodoulou, Dimitrios; Theodorou, Stavroula; Beris, Alexandre; Ploumis, Avraam

2017-01-01

Introduction  The Ohkuma questionnaire is a validated screening tool originally used to detect dysphagia among patients hospitalized in Japanese nursing facilities. Objective  The purpose of this study is to evaluate the reliability and validity of the adapted Greek version of the Ohkuma questionnaire. Methods  Following the steps for cross-cultural adaptation, we delivered the validated Ohkuma questionnaire to 70 patients (53 men, 17 women) who were either suffering from dysphagia or not. All of them completed the questionnaire a second time within a month. For all of them, we performed a bedside and VFSS study of dysphagia and asked participants to undergo a second VFSS screening, with the exception of nine individuals. Statistical analysis included measurement of internal consistency with Cronbach's α coefficient, reliability with Cohen's Kappa, Pearson's correlation coefficient and construct validity with categorical components, and One-Way Anova test. Results  According to Cronbach's α coefficient (0.976) for total score, there was high internal consistency for the Ohkuma Dysphagia questionnaire. Test-retest reliability (Cohen's Kappa) ranged from 0.586 to 1.00, exhibiting acceptable stability. We also estimated the Pearson's correlation coefficient for the test-retest total score, which reached high levels (0.952; p  = 0.000). The One-Way Anova test in the two measurement times showed statistically significant correlation in both measurements ( p  = 0.02 and p  = 0.016). Conclusion  The adapted Greek version of the questionnaire is valid and reliable and can be used for the screening of dysphagia in the Greek-speaking patients.

The effect of short fiber composite base on microleakage and load-bearing capacity of posterior restorations

PubMed Central

Garoushi, Sufyan K.; Hatem, Marwa; Lassila, Lippo V. J.; Vallittu, Pekka K.

2015-01-01

Abstract Objectives: To determine the marginal microleakage of Class II restorations made with different composite base materials and the static load-bearing capacity of direct composite onlay restorations. Methods: Class II cavities were prepared in 40 extracted molars. They were divided into five groups (n = 8/group) depending on composite base material used (everX Posterior, SDR, Tetric EvoFlow). After Class II restorations were completed, specimens were sectioned mid-sagitally. For each group, sectioned restorations were immersed in dye. Specimens were viewed under a stereo-microscope and the percentage of cavity leakage was calculated. Ten groups of onlay restorations were fabricated (n = 8/group); groups were made with composite base materials (everX Posterior, SDR, Tetric EvoFlow, Gradia Direct LoFlo) and covered by 1 mm layer of conventional (Tetric N-Ceram) or bulk fill (Tetric EvoCeram Bulk Fill) composites. Groups made only from conventional, bulk fill and short fiber composites were used as control. Specimens were statically loaded until fracture. Data were analyzed using ANOVA (p = 0.05). Results: Microleakage of restorations made of plain conventional composite or short fiber composite base material showed statistically (p < 0.05) lower values compared to other groups. ANOVA revealed that onlay restorations made from short fiber-reinforced composite (FRC) as base or plain restoration had statistically significant higher load-bearing capacity (1593 N) (p < 0.05) than other restorations. Conclusion: Restorations combining base of short FRC and surface layer of conventional composite displayed promising performance related to microleakage and load-bearing capacity. PMID:28642894

Comparative evaluation of low cost materials as constructed wetland filling media

NASA Astrophysics Data System (ADS)

Pinho, Henrique J. O.; Vaz, Mafalda M.; Mateus, Dina M. R.

2017-11-01

Three waste materials from civil construction activities were assessed as low cost alternative filling materials used in Constructed Wetlands (CW). CW are green processes for wastewater treatment, whose design includes an appropriate selection of vegetation and filling material. The sustainability of such processes may be incremented using recovered wastes as filling materials. The abilities of the materials to support plant growth and to contribute to pollutants removal from wastewater were assessed and compared to expanded clay, a filling usually used in CW design. Statistical analysis, using one-way ANOVA and Welch's ANOVA, demonstrate that limestone fragments are a better choice of filling material than brick fragments and basalt gravel.

CASPASE-12 and rheumatoid arthritis in African-Americans

PubMed Central

Marshall, Laura; Obaidullah, Mohammad; Fuchs, Trista; Fineberg, Naomi S.; Brinkley, Garland; Mikuls, Ted R.; Bridges, S. Louis; Hermel, Evan

2014-01-01

CASPASE-12 (CASP12) has a down-regulatory function during infection, and thus may protect against inflammatory disease. We investigated the distribution of CASP12 alleles (#rs497116) in African-Americans (AA) with rheumatoid arthritis (RA). CASP12 alleles were genotyped in 953 RA patients and 342 controls. Statistical analyses comparing genotype groups were performed using Kruskal-Wallis non-parametric ANOVA with Mann-Whitney U tests and chi-square tests. There was no significant difference in the overall distribution of CASP12 genotypes within AA with RA, but CASP12 homozygous patients had lower baseline joint narrowing scores. CASP12 homozygosity appears to be a subtle protective factor for some aspects of RA in AA patients. PMID:24515649

Effect of nanofillers' size on surface properties after toothbrush abrasion.

PubMed

Cavalcante, Larissa M; Masouras, Konstantinos; Watts, David C; Pimenta, Luiz A; Silikas, Nick

2009-02-01

To investigate the effect of filler-particle size of experimental and commercial resin composites, undergoing toothbrush abrasion, on three surface properties: surface roughness (SR), surface gloss (G) and color stability (CS). Four model (Ivoclar/Vivadent) and one commercial resin composite (Tokuyama) with varying filler-size from 100-1000 nm were examined. Six discs (10 mm x 2 mm) from each product were prepared and mechanically polished. The samples were then submitted to 20,000 brushing strokes in a toothbrush abrasion machine. SR parameters (Ra, Rt and RSm), G, and CS were measured before and after toothbrush abrasion. Changes in SR and G were analyzed by 2-way ANOVA, with Bonferroni post hoc test. CS values were submitted to one-way ANOVA and Bonferroni post hoc test (alpha=0.05). Initial G values ranged between 73-87 gloss units (GU) and were reduced after toothbrush abrasion to a range of 8-64 GU. Toothbrush abrasion resulted in significant modifications in SR and G amongst the materials tested, attributed to filler sizes. There was statistically significant difference in color (delta E* ranged from 0.38-0.88). Filler size did not affect color stability. Toothbrush abrasion resulted in rougher and matte surfaces for all materials tested. Although the individual differences in surface roughness among filler sizes were not always significant, the correlation showed a trend that larger filler sizes resulted in higher surface roughness after abrasion for the SR parameters Ra and Rt (r = 0.95; r = 0.93, respectively). RSm showed an increase after toothbrush abrasion for all resin composites, however no significant correlation was detected (r = 0.21).There was a significant correlation between G and Ra ratios (r = - 0.95).

Relationship between career motivation and perceived spiritual leadership in health professional educators: a correlational study in Iran.

PubMed

Sadeghifar, Jamil; Bahadori, Mohammadkarim; Baldacchino, Donia; Raadabadi, Mehdi; Jafari, Mehdi

2013-12-20

Career motivation in university educators through efficient ways and appropriate with the educational system, is considered one of the important factors affecting education of students and their competence. This study aimed to determine the relationship between career motivation and spiritual leadership among a university of medical sciences in the west, Iran. This descriptive, cross-sectional correlation study was conducted among the university educators of medical sciences in the west, Iran in 2012. All of the educators (N=230) were selected and recruited according to census method. The data were collected by two established self-completed questionnaires on spiritual leadership (SL) and career motivation. Data were analyzed statistically by parametric tests: Pearson correlation, independent student t-test and one-way analysis of variance (ANOVA). The Pearson correlation test identified a significant relationship between educators' career motivation and vision, altruistic love, hope/faith, meaning/calling and membership dimensions of spiritual leadership (p<0.05). The independent t-test detected a significant relationship between the 'hope/faith' (p=0.04) and organizational commitment (p=0.004) dimensions and the gender of educators. ANOVA revealed significant differences in educators' years of work experience and their overall career motivation (p=0.003) and the dimension of 'membership' (p<0.04). A significant relationship was found in 'altruistic love' and 'Hope/faith', and the educators' academic rank place in the university (p=0.03). Also a significant relationship was found in 'vision' (p=0.03) and 'altruistic love' (p=0.002) and 'membership' (p=0.04) dimensions, and the type of faculty. The results indicate that the dimensions of existence of spiritual leadership may have a positive relationship with educators' career motivation.

Learning style-based teaching harvests a superior comprehension of respiratory physiology.

PubMed

Anbarasi, M; Rajkumar, G; Krishnakumar, S; Rajendran, P; Venkatesan, R; Dinesh, T; Mohan, J; Venkidusamy, S

2015-09-01

Students entering medical college generally show vast diversity in their school education. It becomes the responsibility of teachers to motivate students and meet the needs of all diversities. One such measure is teaching students in their own preferred learning style. The present study was aimed to incorporate a learning style-based teaching-learning program for medical students and to reveal its significance and utility. Learning styles of students were assessed online using the visual-auditory-kinesthetic (VAK) learning style self-assessment questionnaire. When respiratory physiology was taught, students were divided into three groups, namely, visual (n = 34), auditory (n = 44), and kinesthetic (n = 28), based on their learning style. A fourth group (the traditional group; n = 40) was formed by choosing students randomly from the above three groups. Visual, auditory, and kinesthetic groups were taught following the appropriate teaching-learning strategies. The traditional group was taught via the routine didactic lecture method. The effectiveness of this intervention was evaluated by a pretest and two posttests, posttest 1 immediately after the intervention and posttest 2 after a month. In posttest 1, one-way ANOVA showed a significant statistical difference (P=0.005). Post hoc analysis showed significance between the kinesthetic group and traditional group (P=0.002). One-way ANOVA showed a significant difference in posttest 2 scores (P < 0.0001). Post hoc analysis showed significance between the three learning style-based groups compared with the traditional group [visual vs. traditional groups (p=0.002), auditory vs. traditional groups (p=0.03), and Kinesthetic vs. traditional groups (p=0.001)]. This study emphasizes that teaching methods tailored to students' style of learning definitely improve their understanding, performance, and retrieval of the subject. Copyright © 2015 The American Physiological Society.

Relationship between Career Motivation and Perceived Spiritual Leadership in Health Professional Educators: A Correlational Study in Iran

PubMed Central

Sadeghifar, Jamil; Bahadori, Mohammadkarim; Baldacchino, Donia; Raadabadi, Mehdi; Jafari, Mehdi

2014-01-01

Background and Aims: Career motivation in university educators through efficient ways and appropriate with the educational system, is considered one of the important factors affecting education of students and their competence. This study aimed to determine the relationship between career motivation and spiritual leadership among a university of medical sciences in the west, Iran. Methods: This descriptive, cross-sectional correlation study was conducted among the university educators of medical sciences in the west, Iran in 2012. All of the educators (N=230) were selected and recruited according to census method. The data were collected by two established self-completed questionnaires on spiritual leadership (SL) and career motivation. Data were analyzed statistically by parametric tests: Pearson correlation, independent student t-test and one-way analysis of variance (ANOVA). Results: The Pearson correlation test identified a significant relationship between educators’ career motivation and vision, altruistic love, hope/faith, meaning/calling and membership dimensions of spiritual leadership (p<0.05). The independent t-test detected a significant relationship between the ‘hope/faith’ (p=0.04) and organizational commitment (p=0.004) dimensions and the gender of educators. ANOVA revealed significant differences in educators’ years of work experience and their overall career motivation (p=0.003) and the dimension of ‘membership’ (p<0.04). A significant relationship was found in ‘altruistic love’ and ‘Hope/faith’, and the educators’ academic rank place in the university (p=0.03). Also a significant relationship was found in ‘vision’ (p=0.03) and ‘altruistic love’ (p=0.002) and ‘membership’ (p=0.04) dimensions, and the type of faculty. Conclusion: The results indicate that the dimensions of existence of spiritual leadership may have a positive relationship with educators’ career motivation. PMID:24576374

Toxicity testing of restorative dental materials using brine shrimp larvae (Artemia salina).

PubMed

Milhem, Manar M; Al-Hiyasat, Ahmad S; Darmani, Homa

2008-01-01

This study investigated the effect of extracts of different composites, glass ionomer cement (GIC)s and compomers on the viability of brine shrimp larvae. Ethanolic extracts of four dental composites (Z-100; Solitaire 2; Filtek P60 and Synergy), a conventional GIC (Ketac-Fil), a resin-modified glass ionomer cement (Vitremer), two compomers (F2000; Dyract AP), and a flowable compomer (Dyract Flow) were prepared from each material. Following evaporation of the ethanol, the extracts were resuspended in distilled water, which was then used to test the effects on the viability of brine shrimp larvae. For the composites, the extract of Synergy was the least toxic (88% viability) followed by the extracts of Solitaire 2, Z100 and P60 (75%, 67.5% and 50% viability, respectively). One-way ANOVA revealed highly significant differences between the resin composite materials (p<0.001). Follow-up comparison between the composite groups by Tukey's pairwise multiple-comparison test (alpha =0.05) showed that the extract of Synergy was significantly less toxic than the extracts of all the other materials except that of Solitaire 2. The compomers showed 100% lethality, while the percentage of viable larvae for the extracts of Ketac-Fil, and Vitremer were 32.3%, and 37.0%, respectively. One-way ANOVA revealed highly significant differences between the groups of materials (p<0.001). Follow-up comparison between the groups by Tukey's test (alpha = 0.05) showed that the toxic effect of the extracts of the compomers were significantly greater than that of Ketac-Fil, and Vitremer. The differences in the toxic effects of Vitremer and Ketac-Fil were not statistically significant. In conclusion, the toxicity of composite materials varied according to their chemical composition. Compomers were the most lethal materials to brine shrimp larvae followed by GICs and then composites.

Can a clinical placement influence stigma? An analysis of measures of social distance.

PubMed

Moxham, Lorna; Taylor, Ellie; Patterson, Christopher; Perlman, Dana; Brighton, Renee; Sumskis, Susan; Keough, Emily; Heffernan, Tim

2016-09-01

The way people who experience mental illness are perceived by health care professionals, which often includes stigmatising attitudes, can have a significant impact on treatment outcomes and on their quality of life. To determine whether stigma towards people with mental illness varied for undergraduate nursing students who attended a non-traditional clinical placement called Recovery Camp compared to students who attended a 'typical' mental health clinical placement. Quasi-experimental. Seventy-nine third-year nursing students were surveyed; n=40 attended Recovery Camp (intervention), n=39 (comparison group) attended a 'typical' mental health clinical placement. All students completed the Social Distance Scale (SDS) pre- and post-placement and at three-month follow-up. Data analysis consisted of a one-way repeated measures analysis of variance (ANOVA) exploring parameter estimates between group scores across three time points. Two secondary repeated measures ANOVAs were performed to demonstrate the differences in SDS scores for each group across time. Pairwise comparisons demonstrated the differences between time intervals. A statistically significant difference in ratings of stigma between the intervention group and the comparison group existed. Parameter estimates revealed that stigma ratings for the intervention group were significantly reduced post-placement and remained consistently low at three-month follow-up. There was no significant difference in ratings of stigma for the comparison group over time. Students who attended Recovery Camp reported significant decreases in stigma towards people with a mental illness over time, compared to the typical placement group. Findings suggest that a therapeutic recreation based clinical placement was more successful in reducing stigma regarding mental illness in undergraduate nursing students compared to those who attended typical mental health clinical placements. Copyright © 2016 Elsevier Ltd. All rights reserved.

In situ effect of a CPP-ACP chewing gum on enamel erosion associated or not with abrasion.

PubMed

de Oliveira, Andressa Feitosa Bezerra; de Oliveira Diniz, Luciana Vilar; Forte, Franklin Delano Soares; Sampaio, Fabio Correia; Ccahuana-Vásquez, Renzo Alberto; Tochukwu Amaechi, Bennett

2017-01-01

The purpose of this study is to analyze the in situ effect of a casein phosphopeptide-stabilized amorphous calcium phosphate (CPP-ACP) chewing gum on human enamel erosion lesion associated or not with abrasion. A three-way crossover study of 7 days was conducted involving 10 volunteers subjected to the same protocol: (G1) CPP-ACP sugar-free chewing gum, (G2) regular sugar-free chewing gum without CPP-ACP, and (G3) saliva-no chewing gum. An abrasion test was included in each phase. A 3D non-contact profilometry measurement of lesion depth and surface roughness was obtained of sound and eroded surfaces. A salivary calcium concentration was determined for all volunteers. ANOVA followed by Tukey's test were used with a p < 0.05. The enamel depth and the enamel surface roughness of the CPP-ACP gum group were significantly lower than the others (ANOVA, p < 0.05). No significant differences were observed between the treatments when associated with abrasion (p > 0.05). A positive and significant correlation was seen between the lesion depth and enamel surface roughness for GI (r = 0.87, p = 0.00) and GIII (r = 0.79, p = 0.00) groups. The estimated total calcium presented in the saliva after the chewed CPP-ACP gum showed no statistical significance between the mean absorbance values at the different time collections (p > 0.05). It is demonstrated that the incorporation of the CPP-ACP into a sugar-free gum significantly increased the remineralization/protection of eroded enamel surface. The CPP-ACP added to gum may be a suitable alternative vehicle, to deliver calcium ions to saliva and therefore protecting enamel.

Academic Motivations of Pre-Service English Language Teachers

ERIC Educational Resources Information Center

Ariogul, Sibel

2009-01-01

This study examines the academic motivation, in a Turkish context, of Turkish pre-service English teachers to contribute field research. Students (n=287) completed the Academic Motivation Scale (AMS) and a demographic questionnaire. Data were analyzed using descriptive statistics, a one-way ANOVA, independent sample t-test, and Pearson product…

Determining Sample Sizes for Precise Contrast Analysis with Heterogeneous Variances

ERIC Educational Resources Information Center

Jan, Show-Li; Shieh, Gwowen

2014-01-01

The analysis of variance (ANOVA) is one of the most frequently used statistical analyses in practical applications. Accordingly, the single and multiple comparison procedures are frequently applied to assess the differences among mean effects. However, the underlying assumption of homogeneous variances may not always be tenable. This study…

Analyzing Randomized Controlled Interventions: Three Notes for Applied Linguists

ERIC Educational Resources Information Center

Vanhove, Jan

2015-01-01

I discuss three common practices that obfuscate or invalidate the statistical analysis of randomized controlled interventions in applied linguistics. These are (a) checking whether randomization produced groups that are balanced on a number of possibly relevant covariates, (b) using repeated measures ANOVA to analyze pretest-posttest designs, and…

Identifying the Factors That Influence Change in SEBD Using Logistic Regression Analysis

ERIC Educational Resources Information Center

Camilleri, Liberato; Cefai, Carmel

2013-01-01

Multiple linear regression and ANOVA models are widely used in applications since they provide effective statistical tools for assessing the relationship between a continuous dependent variable and several predictors. However these models rely heavily on linearity and normality assumptions and they do not accommodate categorical dependent…

A comparative evaluation: Oral leukoplakia surgical management using diode laser, CO2 laser, and cryosurgery.

PubMed

Natekar, Madhukar; Raghuveer, Hosahallli-Puttaiah; Rayapati, Dilip-Kumar; Shobha, Eshwara-Singh; Prashanth, Nagesh-Tavane; Rangan, Vinod; Panicker, Archana G

2017-06-01

The comparatively evaluate the three surgical treatment modalities namely cryosurgery, diode and CO2 laser surgery in terms of healing outcomes on the day of surgery, first and second week post operatively and recurrence at the end of 18 months was assessed. Thirty selected patients were divided randomly into three groups. Each group comprising of ten patients were subjected to one of the three modalities of treatment namely cryosurgery, diode laser or CO2 laser surgery for ablation of OL. Obtained data was analyzed using mainly using Chi-square and Anova tests. Study showed statistical significant differences (p > 0.05) for evaluation parameters like pain, edema and scar. The parameters like infection, recurrence, bleeding showed no statistical significance. Pain was significantly higher in CO2 laser surgery group as compared with diode laser group. There was no recurrence observed at the end of the 6 months follow up period in all the three study groups. Observations from the study highlights that all three surgical modalities used in this study were effective for treatment of OL, and the overall summation of the results of the study showed that laser therapy (CO2 and Diode) seems to offer better clinically significant results than cryotherapy. Key words: Oral premalignant lesion, leukoplakia, cryosurgery, CO2 laser surgery, diode laser surgery.

[An in vitro study of the fracture strength of tooth preparations for Empress 2 veneers and crowns and mandibular incisors restored with Empress 2 veneers and crowns].

PubMed

Wei, Xue; Li, Yan

2009-12-01

To compare the fracture resistance of mandibular incisors' preparations for veneers and crowns, mandibular incisors restored with Empress 2 veneers and crowns. 50 human mandibular incisors were randomly divided into five groups. Each group consisted of ten teeth and the treatment obtained as follows: A, tooth preparations for veneers; B, tooth preparations for crowns; C, teeth restored with veneers; D, teeth restored with crowns; E, untreated group. The teeth received standardized preparation and the restorations were manufactured with Empress 2 system and cemented with resin luting agent. The fracture resistances of teeth were measured by Instron universal testing machine and statistically analyzed with one-way ANOVA. The fracture resistances of A, B, C, D, E were (576.11 +/- 91.53), (204.13 +/- 85.88), (451.50 +/- 116.81), (386.16 +/- 117.75) and (566.05 +/- 121.37) N, respectively. The statistical analysis demonstrated significant differences between five groups. There were no significant differences between group A and E, group C and D. Tooth preparations for veneers did not significantly reduce the fracture resistance of mandibular incisor. The fracture resistance of teeth restored with Empress 2 veneers and crowns did not significantly differ from each other.

The effect of budesonide on orthodontic induced root resorption.

PubMed

Aghili, Hosseinagha; Meybodi, Seyed Amir Reza Fatahi; Ardekani, Mohammed Danesh; Bemanianashkezari, Mohammad Hassan; Modaresi, Jalil; Masomi, Yousef; Moghadam, Mahdjoube Goldani

2015-01-01

The aim of this study was to evaluate the hypothesis that budesonide increases the susceptibility of teeth to root resorption during the course of orthodontic treatment. A randomized controlled trial design (animal study) was employed. Budesonide was administered in test group for 14 days during which orthodontic force was applied to upper right molar. Afterwards, root resorption was measured on mesio-cervical and disto-apical parts of the mesial root on transverse histological sections. ANOVA and Bonfferoni tests were used. Statistical significance was considered to be P ≤ 0.05. In general, the subgroups in which the force was applied showed significantly greater root resorption. Where force was applied there was no significant difference, whether budesonide was administered or not. While where there was no force, a group who received budesonide showed significantly greater root resorption than the other, unless at the coronal level where the difference was not significant. Within the limitations of this study, it seems budesonide could increase root resorption, but in the presence of orthodontic force this effect is negligible.

Classical Statistics and Statistical Learning in Imaging Neuroscience

PubMed Central

Bzdok, Danilo

2017-01-01

Brain-imaging research has predominantly generated insight by means of classical statistics, including regression-type analyses and null-hypothesis testing using t-test and ANOVA. Throughout recent years, statistical learning methods enjoy increasing popularity especially for applications in rich and complex data, including cross-validated out-of-sample prediction using pattern classification and sparsity-inducing regression. This concept paper discusses the implications of inferential justifications and algorithmic methodologies in common data analysis scenarios in neuroimaging. It is retraced how classical statistics and statistical learning originated from different historical contexts, build on different theoretical foundations, make different assumptions, and evaluate different outcome metrics to permit differently nuanced conclusions. The present considerations should help reduce current confusion between model-driven classical hypothesis testing and data-driven learning algorithms for investigating the brain with imaging techniques. PMID:29056896

The best motivator priorities parents choose via analytical hierarchy process

NASA Astrophysics Data System (ADS)

Farah, R. N.; Latha, P.

2015-05-01

Motivation is probably the most important factor that educators can target in order to improve learning. Numerous cross-disciplinary theories have been postulated to explain motivation. While each of these theories has some truth, no single theory seems to adequately explain all human motivation. The fact is that human beings in general and pupils in particular are complex creatures with complex needs and desires. In this paper, Analytic Hierarchy Process (AHP) has been proposed as an emerging solution to move towards too large, dynamic and complex real world multi-criteria decision making problems in selecting the most suitable motivator when choosing school for their children. Data were analyzed using SPSS 17.0 ("Statistical Package for Social Science") software. Statistic testing used are descriptive and inferential statistic. Descriptive statistic used to identify respondent pupils and parents demographic factors. The statistical testing used to determine the pupils and parents highest motivator priorities and parents' best priorities using AHP to determine the criteria chosen by parents such as school principals, teachers, pupils and parents. The moderating factors are selected schools based on "Standard Kualiti Pendidikan Malaysia" (SKPM) in Ampang. Inferential statistics such as One-way ANOVA used to get the significant and data used to calculate the weightage of AHP. School principals is found to be the best motivator for parents in choosing school for their pupils followed by teachers, parents and pupils.

GLP-1 response to a mixed meal: what happens 10 years after Roux-en-Y gastric bypass (RYGB)?

PubMed

Dar, Moahad S; Chapman, William H; Pender, John R; Drake, Almond J; O'Brien, Kevin; Tanenberg, Robert J; Dohm, G Lynis; Pories, Walter J

2012-07-01

Oral meal consumption increases glucagon-like peptide 1 (GLP-1) release which maintains euglycemia by increasing insulin secretion. This effect is exaggerated during short-term follow-up of Roux-en-y gastric bypass (RYGB). We examined the durability of this effect in patient with type 2 diabetes (T2DM) >10 years after RYGB. GLP-1 response to a mixed meal in the 10-year post-RYGB group (n = 5) was compared to lean (n = 9), obese (n = 6), and type 2 diabetic (n = 10) controls using a cross-sectional study design. Analysis of variance (ANOVA) was used to evaluate GLP-1 response to mixed meal consumption from 0 to 300 min, 0-20 min, 20-60 min, and 60-300 min, respectively. Weight, insulin resistance, and T2DM were also assessed. GLP-1 response 0-300 min in the 10-year post-RYGB showed a statistically significant overall difference (p =  0.01) compared to controls. Furthermore, GLP-1 response 0-20 min in the 10-year post-RYGB group showed a very rapid statistically significant rise (p = 0.035) to a peak of 40 pM. GLP-1 response between 20 and 60 min showed a rapid statistically significant (p = 0.041) decline in GLP-1 response from ~40 pM to 10 pM. GLP-1 response in the 10-year post-RYGB group from 60 to 300 min showed no statistically significant difference from controls. BMI, HOMA, and fasting serum glucose before and >10 years after RYGB changed from 59.9 → 40.4, 8.7 → 0.88, and 155.2 → 87.6 mg/dl, respectively, and were statistically significant (p < 0.05). An exaggerated GLP-1 response was noted 10 years after RYGB, strongly suggesting a durability of this effect. This phenomenon may play a key role in maintaining type 2 diabetes remission and weight loss after RYGB.

Assertiveness and problem solving in midwives

PubMed Central

Yurtsal, Zeliha Burcu; Özdemir, Levent

2015-01-01

Background: Midwifery profession is required to bring solutions to problems and a midwife is expected to be an assertive person and to develop midwifery care. This study was planned to examine the relationship between assertiveness and problem-solving skills of midwives. Materials and Methods: This cross-sectional study was conducted with 201 midwives between July 2008 and February 2009 in the city center of Sivas. The Rathus Assertiveness Schedule (RAS) and Problem Solving Inventory (PSI) were used to determine the level of assertiveness and problem-solving skills of midwives. Statistical methods were used as mean, standard deviation, percentage, Student's T, ANOVA and Tukey HSD, Kruskal Wallis, Fisher Exact, Pearson Correlation and Chi-square tests and P < 0.05. Results: The RAS mean scores and the PSI mean scores showed statistically significant differences in terms of a midwife's considering herself as a member of the health team, expressing herself within the health care team, being able to say “no” when necessary, cooperating with her colleagues, taking part in problem-solving skills training. A statistically significant negative correlation was found between the RAS and PSI scores. The RAS scores decreased while the problem-solving scores increased (r: -0451, P < 0.01). Conclusions: There were significant statistical differences between assertiveness levels and problem solving skills of midwives, and midwives who were assertive solved their problems better than did others. Assertiveness and problem-solving skills training will contribute to the success of the midwifery profession. Midwives able to solve problems, and display assertive behaviors will contribute to the development of midwifery profession. PMID:26793247

Is there a relationship between periodontal disease and causes of death? A cross sectional study.

PubMed

Natto, Zuhair S; Aladmawy, Majdi; Alasqah, Mohammed; Papas, Athena

2015-01-01

The aim of this study was to evaluate whether there is any correlation between periodontal disease and mortality contributing factors, such as cardiovascular disease and diabetes mellitus in the elderly population. A dental evaluation was performed by a single examiner at Tufts University dental clinics for 284 patients. Periodontal assessments were performed by probing with a manual UNC-15 periodontal probe to measure pocket depth and clinical attachment level (CAL) at 6 sites. Causes of death abstracted from death certificate. Statistical analysis involved ANOVA, chi-square and multivariate logistic regression analysis. The demographics of the population sample indicated that, most were females (except for diabetes mellitus), white, married, completed 13 years of education and were 83 years old on average. CAL (continuous or dichotomous) and marital status attained statistical significance (p<0.05) in contingency table analysis (Chi-square for independence). Individuals with increased CAL were 2.16 times more likely (OR=2.16, 95% CI=1.47-3.17) to die due to CVD and this effect persisted even after control for age, marital status, gender, race, years of education (OR=2.03, 95% CI=1.35-3.03). CAL (continuous or dichotomous) was much higher among those who died due to diabetes mellitus or out of state of Massachusetts. However, these results were not statistically significant. The same pattern was observed with pocket depth (continuous or dichotomous), but these results were not statistically significant either. CAL seems to be more sensitive to chronic diseases than pocket depth. Among those conditions, cardiovascular disease has the strongest effect.

[Acetabular anteversion angle of the hip in the Mexican adult population measured with computed tomography].

PubMed

Rubalcava, J; Gómez-García, F; Ríos-Reina, J L

2012-01-01

Knowledge of the radiogrametric characteristics of a specific skeletal segment in a healthy population is of the utmost clinical importance. The main justification for this study is that there is no published description of the radiogrametric parameter of acetabular anteversion in a healthy Mexican adult population. A prospective, descriptive and cross-sectional study was conducted. Individuals of both genders older than 18 years and orthopedically healthy were included. They underwent a two-dimensional axial tomographic study of both hips to measure the acetabular anteversion angles. The statistical analysis consisted of obtaining central trend and scatter measurements. A multivariate analysis of variance (ANOVA) and statistical significance were performed. 118 individuals were studied, 60 males and 58 females, with a mean age of 47.7 +/- 16.7, and a range of 18-85 years. The anteversion of the entire group was 18.6 degrees + 4.1 degrees. Anteversion in males was 17.3 degrees +/- 3.5 degrees (10 degrees - 25 degrees) and in females 19.8 degrees +/- 4.7 degrees (10 degrees - 31 degrees). There were no statistically significant differences (p < or = 0.05) in right and left anteversion in the entire group. However, there were statistically significant differences (p > or = 0.005) both in the right and left sides when males and females were compared. Our study showed that there are great variations in the anteversion ranges of a healthy population. When our results are compared with those published by other authors the mean of most measurements exceeds 15 degrees. This should be useful to make therapeutic decisions that involve acetabular anteversion.

To Evaluate & Compare Retention of Complete Cast Crown in Natural Teeth Using Different Auxiliary Retentive Features with Two Different Crown Heights - An In Vitro Study.

PubMed

Vinaya, Kundapur; Rakshith, Hegde; Prasad D, Krishna; Manoj, Shetty; Sunil, Mankar; Naresh, Shetty

2015-06-01

To evaluate the retention of complete cast crowns in teeth with adequate and inadequate crown height and to evaluate the effects of auxiliary retentive features on retention form complete cast crowns. Sixty freshly extracted human premolars. They were divided into 2 major groups depending upon the height of the teeth after the preparation. Group1 (H1): prepared teeth with constant height of 3.5 mm and Group 2 (H2): prepared teeth with constant height of 2.5 mm. Each group is further subdivided into 3 subgroups, depending upon the retentive features incorporated. First sub group were prepared conventionally, second sub group with proximal grooves and third subgroups with proximal boxes preparation. Castings produced in Nickel chromium alloy were cemented with glass ionomer cement and the cemented castings were subjected to tensional forces required to dislodge each cemented casting from its preparation and used for comparison of retentive quality. The data obtained were statistically analyzed using Oneway ANOVA test. The results showed there was statistically significant difference between adequate (H1) and inadequate (H2) group and increase in retention when there was incorporation of retentive features compared to conventional preparations. Incorporation of retentive grooves was statistically significant compared to retention obtained by boxes. Results also showed there was no statistically significant difference between long conventional and short groove. Complete cast crowns on teeth with adequate crown height exhibited greater retention than with inadequate crown height. Proximal grooves provided greater amount of retention when compared with proximal boxes.

Condylar positional changes in rapid maxillary expansion assessed with cone-beam computer tomography.

PubMed

McLeod, Lauren; Hernández, Ivonne A; Heo, Giseon; Lagravère, Manuel O

2016-09-01

The aim of this study was to determine the presence of condylar spatial changes in patients having rapid maxillary expansion treatments compared to a control group. Thirty-seven patients with maxillary transverse deficiency (11-17 years old) were randomly allocated into two groups (one treatment group - tooth borne expander [hyrax] - and one control group). Cone-beam computer tomographies (CBCT) were obtained from each patient at two time points (initial T1 and at removal of appliance at 6 months T2). CBCTs were analyzed using AVIZO software and landmarks were placed on the upper first molars and premolars, cranial base, condyles and glenoid fossa. Descriptive statistics, intraclass correlation coefficients and one-way Anova analysis were used to determine if there was a change in condyle position with respect to the glenoid fossa and cranial base and if there was a statistically significant difference between groups. Descriptive statistics show that changes in the condyle position with respect to the glenoid fossa were minor in both groups (<1.9mm average for both groups). The largest difference in both groups was found when measuring the distance between the left and right condyle heads. When comparing changes between both groups, no statistically significant difference was found between changes in the condyles (P<0.05). Rapid maxillary expansion treatments present mild effects/changes on the condylar position. Nevertheless, these changes do not present a significant difference with controls, thus not constituting a limitation for applying this treatment. Copyright © 2016 CEO. Published by Elsevier Masson SAS. All rights reserved.

GLIMMPSE Lite: Calculating Power and Sample Size on Smartphone Devices

PubMed Central

Munjal, Aarti; Sakhadeo, Uttara R.; Muller, Keith E.; Glueck, Deborah H.; Kreidler, Sarah M.

2014-01-01

Researchers seeking to develop complex statistical applications for mobile devices face a common set of difficult implementation issues. In this work, we discuss general solutions to the design challenges. We demonstrate the utility of the solutions for a free mobile application designed to provide power and sample size calculations for univariate, one-way analysis of variance (ANOVA), GLIMMPSE Lite. Our design decisions provide a guide for other scientists seeking to produce statistical software for mobile platforms. PMID:25541688

Bone repair of critical size defects treated with mussel powder associated or not with bovine bone graft: histologic and histomorphometric study in rat calvaria.

PubMed

Trotta, Daniel Rizzo; Gorny, Clayton; Zielak, João César; Gonzaga, Carla Castiglia; Giovanini, Allan Fernando; Deliberador, Tatiana Miranda

2014-09-01

The objective of this study was to evaluate the bone repair of critical size defects treated with mussel powder with or without additional bovine bone. Critical size defects of 5 mm were realized in the calvaria of 70 rats, which were randomly divided in 5 groups - Control (C), Autogenous Bone (AB), Mussel Powder (MP), Mussel Powder and Bovine Bone (MP-BB) and Bovine Bone (BB). Histological and histomorphometric analysis were performed 30 and 90 days after the surgical procedures (ANOVA e Tukey p < 0.05). After 30 days, the measures of remaining particles were: 28.36% (MP-BB), 26.63% (BB) and 8.64% (MP) with a statistically significant difference between BB and MP. The percentage of osseous matrix after 30 days was, AB (55.17%), 23.31% (BB), 11.66% (MP) and 10.71% (MP-BB) with statistically significant differences among all groups. After 90 days the figures were 25.05% (BB), 21.53% (MP-BB) and 1.97% (MP) with statistically significant differences between MP-BB and MP. Percentages of new bone formation after 90 days were 89.47% (AB), 35.70% (BB), 26.48% (MP-BB) and 7.37% (MP) with statistically significant differences between AB and the other groups. Within the limits of this study, we conclude that mussel powder, with or without additional bovine bone, did not induce new bone formation and did not repair critical size defects in rat calvaria. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Point source pollution and variability of nitrate concentrations in water from shallow aquifers

NASA Astrophysics Data System (ADS)

Nemčić-Jurec, Jasna; Jazbec, Anamarija

2017-06-01

Agriculture is one of the several major sources of nitrate pollution, and therefore the EU Nitrate Directive, designed to decrease pollution, has been implemented. Point sources like septic systems and broken sewage systems also contribute to water pollution. Pollution of groundwater by nitrate from 19 shallow wells was studied in a typical agricultural region, middle Podravina, in northwest Croatia. The concentration of nitrate ranged from <0.1 to 367 mg/l in water from wells, and 29.8 % of 253 total samples were above maximum acceptable value of 50 mg/l (MAV). Among regions R1-R6, there was no statistically significant difference in nitrate concentrations ( F = 1.98; p = 0.15) during the years 2002-2007. Average concentrations of nitrate in all 19 wells for all the analyzed years were between recommended limit value of 25 mg/l (RLV) and MAV except in 2002 (concentration was under RLV). The results of the repeated measures ANOVA showed statistically significant differences between the wells at the point source distance (proximity) of <10 m, compared to the wells at the point source distance of >20 m ( F = 10.6; p < 0.001). Average annual concentrations of nitrate during the years studied are not statistically different, but interaction between proximity and years is statistically significant ( F = 2.07; p = 0.04). Results of k-means clustering confirmed division into four clusters according to the pollution. Principal component analysis showed that there is only one significant factor, proximity, which explains 91.6 % of the total variability of nitrate. Differences in water quality were found as a result of different environmental factors. These results will contribute to the implementation of the Nitrate Directive in Croatia and the EU.

Effect of Different Anti-Oxidants on Shear Bond Strength of Composite Resins to Bleached Human Enamel

PubMed Central

Saladi, Hari Krishna; Bollu, Indira Priyadarshini; Burla, Devipriya; Ballullaya, Srinidhi Vishnu; Devalla, Srihari; Maroli, Sohani; Jayaprakash, Thumu

2015-01-01

Introduction The bond strength of the composite to the bleached enamel plays a very important role in the success and longevity of an aesthetic restoration. Aim The aim of this study was to compare and evaluate the effect of Aloe Vera with 10% Sodium Ascorbate on the Shear bond strength of composite resin to bleached human enamel. Materials and Methods Fifty freshly extracted human maxillary central incisors were selected and divided into 5 groups. Group I and V are unbleached and bleached controls groups respectively. Group II, III, IV served as experimental groups. The labial surfaces of groups II, III, IV, V were treated with 35% Carbamide Peroxide for 30mins. Group II specimens were subjected to delayed composite bonding. Group III and IV specimens were subjected to application of 10% Sodium Ascorbate and leaf extract of Aloe Vera following the Carbamide Peroxide bleaching respectively. Specimens were subjected to shear bond strength using universal testing machine and the results were statistically analysed using ANOVA test. Tukey (HSD) Honest Significant Difference test was used to comparatively analyse statistical differences between the groups. A p-value <0.05 is taken as statistically significant. Results The mean shear bond strength values of Group V showed significantly lower bond strengths than Groups I, II, III, IV (p-value <0.05). There was no statistically significant difference between the shear bond strength values of groups I, II, III, IV. Conclusion Treatment of the bleached enamel surface with Aloe Vera and 10% Sodium Ascorbate provided consistently better bond strength. Aloe Vera may be used as an alternative to 10% Sodium Ascorbate. PMID:26674656

Effects of Plasma Rich in Growth Factors and Platelet-Rich Fibrin on Proliferation and Viability of Human Gingival Fibroblasts

PubMed Central

Vahabi, Surena; Vaziri, Shahram; Torshabi, Maryam

2015-01-01

Objectives: Platelet preparations are commonly used to enhance bone and soft tissue regeneration. Considering the existing controversies on the efficacy of platelet products for tissue regeneration, more in vitro studies are required. The aim of the present study was to compare the in vitro effects of plasma rich in growth factors (PRGF) and platelet-rich fibrin (PRF) on proliferation and viability of human gingival fibroblasts (HGFs). Materials and Methods: Anitua’s PRGF and Choukran’s PRF were prepared according to the standard protocols. After culture periods of 24, 48 and 72 hours, proliferation of HGFs was evaluated by the methyl thiazol tetrazolium assay. Statistical analysis was performed using one-way ANOVA followed by Tukey-Kramer’s multiple comparisons and P-values<0.05 were considered statistically significant. Results: PRGF treatment induced statistically significant (P<0.001) proliferation of HGF cells compared to the negative control (100% viability) at 24, 48 and 72 hours in values of 123%±2.25%, 102%±2.8% and 101%±3.92%, respectively. The PRF membrane treatment of HGF cells had a statistically significant effect on cell proliferation (21%±1.73%, P<0.001) at 24 hours compared to the negative control. However, at 48 and 72 hours after treatment, PRF had a negative effect on HGF cell proliferation and caused 38% and 60% decrease in viability and proliferation compared to the negative control, respectively. The HGF cell proliferation was significantly higher in PRGF than in PRF group (P< 0.001). Conclusion: This study demonstrated that PRGF had a strong stimulatory effect on HGF cell viability and proliferation compared to PRF. PMID:26877740

Marginal and Internal Adaptation of Zirconia Crowns: A Comparative Study of Assessment Methods.

PubMed

Cunali, Rafael Schlögel; Saab, Rafaella Caramori; Correr, Gisele Maria; Cunha, Leonardo Fernandes da; Ornaghi, Bárbara Pick; Ritter, André V; Gonzaga, Carla Castiglia

2017-01-01

Marginal and internal adaptation is critical for the success of indirect restorations. New imaging systems make it possible to evaluate these parameters with precision and non-destructively. This study evaluated the marginal and internal adaptation of zirconia copings fabricated with two different systems using both silicone replica and microcomputed tomography (micro-CT) assessment methods. A metal master model, representing a preparation for an all-ceramic full crown, was digitally scanned and polycrystalline zirconia copings were fabricated with either Ceramill Zi (Amann-Girrbach) or inCoris Zi (Dentslpy-Sirona), n=10. For each coping, marginal and internal gaps were evaluated by silicone replica and micro-CT assessment methods. Four assessment points of each replica cross-section and micro-CT image were evaluated using imaging software: marginal gap (MG), axial wall (AW), axio-occlusal angle (AO) and mid-occlusal wall (MO). Data were statistically analyzed by factorial ANOVA and Tukey test (a=0.05). There was no statistically significant difference between the methods for MG and AW. For AO, there were significant differences between methods for Amann copings, while for Dentsply-Sirona copings similar values were observed. For MO, both methods presented statistically significant differences. A positive correlation was observed determined by the two assessment methods for MG values. In conclusion, the assessment method influenced the evaluation of marginal and internal adaptation of zirconia copings. Micro-CT showed lower marginal and internal gap values when compared to the silicone replica technique, although the difference was not always statistically significant. Marginal gap and axial wall assessment points showed the lower gap values, regardless of ceramic system and assessment method used.

Clinical study of Mineral Trioxide Aggregate in primary molars. Comparison between Grey and White MTA--a long term follow-up (84 months).

PubMed

Cardoso-Silva, Cristina; Barbería, Elena; Maroto, Myriam; García-Godoy, Franklin

2011-02-01

The aim of the present study was to conduct a clinical and radiographic long-term evaluation of pulpotomy in temporary molars performed with Grey and White Mineral Trioxide Aggregate (MTA) and compare the results of Grey and White MTA pulpotomies in a sample of 233 primary molars with a maximum follow-up period of 84 months. The sample was selected from patients treated at the Department of Pediatric Dentistry, Faculty of Dentistry, Complutense University of Madrid, Spain. This prospective study included first and second primary molars treated with pulpotomy with Grey or White MTA, controlled for a maximum follow-up period of 84 months. Statistical analysis of clinical and radiographic findings was completed using ANOVA (P<0.05). Follow-up evaluations, performed every 6 months, revealed that only 2 molars treated with White MTA presented abscess and pathological mobility. Radiographic examination of the 210 molars revealed unfavourable pulp response in only 6 molars (internal or furcation root resorption), without statistically significant differences between Grey and White MTA. Two radiological findings were noticed: dentine bridge formation and partial or total root canal stenosis. Grey MTA induced a higher percentage of dentine bridges with statistically significant differences (P<0.05), and a higher percentage of pulp canal stenosis, without a statistically significant difference. Grey and White MTA presented high levels of clinical and radiographic success. Although the present study showed evidence of a very good biologic response with both types of MTA, Grey MTA showed significantly higher number of dentine bridge formation than White MTA. Copyright © 2010 Elsevier Ltd. All rights reserved.

Influence of different iodinated contrast media on the induction of DNA double-strand breaks after in vitro X-ray irradiation.

PubMed

Deinzer, Christoph K W; Danova, Daniela; Kleb, Beate; Klose, Klaus J; Heverhagen, Johannes T

2014-01-01

The objective of this work was to examine differences in DNA double-strand break induction in peripheral blood lymphocytes after in vitro X-ray irradiation between iodinated contrast agents. Four different iodinated X-ray contrast agents--three of them with two different iodine concentrations--and mannitol (negative control; concentration of 150 mg mannitol per ml blood) were pipetted into blood samples so that there was a concentration of 0, 7.5 or 15 mg of iodine per ml blood in the samples. Negative controls without contrast medium (0 mg of iodine per ml blood) were also processed for every irradiation dose. The tubes were exposed to 0, 20 or 500 mGy in vitro X-ray irradiation. After that, the lymphocytes were separated by using density-gradient centrifugation. Fluorescence microscopy was applied to determine the average number of γH2AX-foci per lymphocyte in the presence or absence of different contrast media or mannitol. Differences in the number of γH2AX-foci were statistically analysed by one-way ANOVA and post-hoc Tukey's honestly significant difference test. Iodinated contrast agents led to a statistically significant increase in DNA double-strand breaks after in vitro irradiation. This effect increased statistically significant with rising radiation dose and appeared independent of the contrast agent used (iopromid, iodixanol, iomeprol, iopamidol). A statistically significant difference in DNA damage between the different tested contrast agents was not found. Therefore, the increase in DNA double-strand breaks depends solely on the amount of iodine applied. For evaluation of clinical consequences, our findings could be tested in further animal studies. Copyright © 2014 John Wiley & Sons, Ltd.

The investigation of the some body parameters of obese and (obese+diabetes) patients with using bioelectrical impedance analysis techniques

NASA Astrophysics Data System (ADS)

Yerlikaya, Emrah; Karageçili, Hasan; Aydin, Ruken Zeynep

2016-04-01

Obesity is a key risk for the development of hyperglycemia, hypertension, hyperlipidemia, insulin resistance and is totally referred to as the metabolic disorders. Diabetes mellitus, a metabolic disorder, is related with hyperglycemia, altered metabolism of lipids, carbohydrates and proteins. The minimum defining characteristic feature to identify diabetes mellitus is chronic and substantiated elevation of circulating glucose concentration. In this study, it is aimed to determine the body composition analyze of obese and (obese+diabetes) patients.We studied the datas taken from three independent groups with the body composition analyzer instrument. The body composition analyzer calculates body parameters, such as body fat ratio, body fat mass, fat free mass, estimated muscle mass, and base metabolic rate on the basis of data obtained by Dual Energy X-ray Absorptiometry using Bioelectrical Impedance Analysis. All patients and healthy subjects applied to Siirt University Medico and their datas were taken. The Statistical Package for Social Sciences version 21 was used for descriptive data analysis. When we compared and analyzed three groups datas, we found statistically significant difference between obese, (obese+diabetes) and control groups values. Anova test and tukey test are used to analyze the difference between groups and to do multiple comparisons. T test is also used to analyze the difference between genders. We observed the statistically significant difference in age and mineral amount p<0.00 between (diabetes+obese) and obese groups. Besides, when these patient groups and control group were analyzed, there were significant difference between most parameters. In terms of education level among the illiterate and university graduates; fat mass kg, fat percentage, internal lubrication, body mass index, water percentage, protein mass percentage, mineral percentage p<0.05, significant statistically difference were observed. This difference especially may result of a sedentary lifestyle.

Gender and age do not influence the ability to work.

PubMed

Padula, Rosimeire Simprini; da Silva Valente, Luciana do Socorro; de Moraes, Mônica Vasconcelos; Chiavegato, Luciana Dias; Cabral, Cristina Maria Nunes

2012-01-01

Work capacity is related to physical, environmental and psychosocial factors and is influenced by individual characteristics and occupations. The aim of this study was to evaluated the relationship between work capacity, gender and age. 360 people employed at an institution of higher education of both genders and similar age were asked to participate in this study. The ability to work was analyzed using Work Ability Index (WAI). Descriptive statistical, Pearson correlations and ANOVA test was applied. Of these, 197 workers who participated in the study completed and returned the questionnaire. The results show there weren't any significant differences between work ability in relation to gender and age, but we observed an increase variability of responses for WAI score in older workers. No significant differences in the perception of the ability of work between men and women..

Estimation of Salivary Parameters among Autoimmune Thyroiditis Patients.

PubMed

Syed, Yasmeen Amthul; Reddy, Bh Satheesh; Ramamurthy, T K; Rajendra, Kavitha; Nerella, Narendra Kumar; Krishnan, Meenakshi; Ramesh, M V; Mohammed, Rezwana Begum

2017-07-01

Saliva is a complex secretion that protects and lubricates the oral cavity. Various systemic diseases and their treatment alter the salivary gland function; one such disease is Autoimmune Thyroid Disease (AITD). AITD has been postulated to exert its hormonal influence on the salivary glands, leading to reduced salivary output. There's a paucity of literature, verifying the stated conjunction in human subjects. The aim was to investigate the salivary profile in AITD patients and its comparison with controls. Descriptive cross-sectional comparative study was conducted using convenience sampling method for screening the presence of thyroid disorders. Two groups comprising of 30 patients in each group diagnosed with autoimmune hypothyroiditis (n=30) and hyperthyroiditis (n=30) respectively and thirty healthy volunteers who were age and sex matched were included as controls. Saliva was collected and evaluated for Unstimulated Salivary Flow Rate (USSFR), pH and buffer capacity. ANOVA and Tukey post-hoc test was performed to find the statistical significance and for pairwise comparison. Statistically significant difference was observed between autoimmune hypothyroiditis, autoimmune hyperthyroiditis and control group with respect to USSFR (p<0.007), pH (p<0.001) and buffer capacity (p<0.001). On pairwise comparisons statistically significant difference was observed between autoimmune hypothyroiditis and autoimmune hyperthyroiditis with respect to controls. We conclude that significant involvement of salivary glands may occur in cases of AITD. Our study showed significant reduction of sialometric values in AITD patients when compared to controls. A strong clinical suspicion of thyroid diseases should be considered when there is chronic hyposalivation; hence thyroid profile must also be done, if the known causes have been excluded.

Influence of Immediate Dentin Sealing on the Shear Bond Strength of Pressed Ceramic Luted to Dentin with Self-Etch Resin Cement

PubMed Central

Dalby, Robert; Ellakwa, Ayman; Millar, Brian; Martin, F. Elizabeth

2012-01-01

Objectives. To examine the effect of immediate dentin sealing (IDS), with dentin bonding agents (DBAs) applied to freshly cut dentin, on the shear bond strength of etched pressed ceramic luted to dentin with RelyX Unicem (RXU) cement. Method. Eighty extracted noncarious third molars were ground flat to expose the occlusal dentin surfaces. The teeth were randomly allocated to five groups (A to E) of sixteen teeth each. Groups A to D were allocated a dentin bonding agent (Optibond FL, One Coat Bond, Single Bond, or Go!) that was applied to the dentin surface to mimic the clinical procedure of IDS. These specimen groups then had etched glass ceramic discs (Authentic) luted to the sealed dentin surface using RXU. Group E (control) had etched glass ceramic discs luted to the dentin surface (without a dentin bonding agent) using RXU following the manufacturer's instructions. All specimens were stored for one week in distilled water at room temperature and then shear stressed at a constant cross-head speed of 1 mm per minute until failure. Statistical analysis was performed by ANOVA followed by post hoc Tukey HSD method (P < 0.05) applied for multiple paired comparisons. Results. The shear bond strength results for group A to E ranged from 6.94 ± 1.53 to 10.03 ± 3.50 MPa. One-way ANOVA demonstrated a difference (P < 0.05) between the groups tested and the Tukey HSD demonstrated a significant (P < 0.05) difference between the shear bond strength (SBS) of Optibond FL (Group A) and Go! (Group D). There was no statistical difference (P > 0.05) in the SBS between the test groups (A–D) or the control (group E). Conclusion. IDS using the dentin bonding agents tested does not statistically (P > 0.05) affect the shear bond strength of etched pressed ceramic luted to dentin with RXU when compared to the control. PMID:22287963

Self-reflection, gender and science achievement

NASA Astrophysics Data System (ADS)

Shoop, Kathleen A.

Drawing on socio-cognitive learning theory, this study compared achievement scores of 134 male and female high school biology students randomly assigned to groups which either used self-reflection, used self-reflection and received feedback, or did not self-reflect. Following a pretest, the teacher provided self-reflection strategy instruction to students in the two intervention groups and then subsequently provided in-class self-reflection time for these groups. The posttest concluded the unit; the retention measure was five weeks later. A quasi-experimental 3 x 3 x 2 (time x intervention x gender) factorial repeated-measures control group design was used for this study; a repeated measures ANOVA and several one-way ANOVA's were used to answer the research questions. Results from the repeated-measures ANOVA revealed significant results for Time and Time x Intervention, with the reflection group demonstrating significantly lower gains from pretest to posttest than the other two groups. The ANOVA examining differences between those who reflected and those who reflected and received feedback provided significant results with similar results for the difference between the control group and the reflection group. For teachers and students this study provides several areas of practical significance. Primarily, teachers may find lower student achievement if students regularly self-reflect but do not receive feedback for their reflection.

Influence of training and competitive sessions on peripheral β-endorphin levels in training show jumping horses

PubMed Central

Cravana, Cristina; Medica, P.; Ragonese, G.; Fazio, E.

2017-01-01

Aim: To investigate the effects of training sessions on circulating β-endorphin changes in sport horses before and after competition and to ascertain whether competition would affect this response. Materials and Methods: A total of 24 trained jumping horses were randomly assigned to one of two training groups: Group A (competing) and Group B (not competing). To determined plasma β-endorphin concentrations, two pre- and post-competition training weeks at aerobic workout and two competitive show jumping event days at anaerobic workout were measured before, 5 and 30 min after exercise. Exercise intensity is described using lactate concentrations and heart rate. The circuit design, intensity, and duration of training sessions were the same for both groups. Results: In Group A, one-way analysis of variance for repeated measures (RM-ANOVA) showed significant effects of exercise on β-endorphin changes (F=14.41; p<0.001), only in the post-competition training sessions, while in Group B showed no significant effects. Two-way RM-ANOVA showed, after post-competition training sessions, a significant difference between Group A and Group B (F=6.235; p=0.023), with higher β-endorphin changes in Group A, compared to Group B. During the competitive show jumping sessions, one-way RM ANOVA showed significant effects of exercise on β-endorphin changes (F=51.10; p<0.001). The statistical analysis, in Group A, showed a significant difference between post-competition training and competitive exercise (F=6.32; p=0.024) with higher β-endorphin values in competitive sessions compared to those of post-competition training. Conclusion: Lactate concentrations seem to be the main factors being correlated with the raise of β-endorphin during anaerobic exercise of competitive events. Exercise of low intensity, as well as that one of training sessions, does not appear to stimulate a significant increased release of β-endorphin and it may depend on the duration of the exercise program. Moreover, the responses during exercise in the course of post-competition training sessions seem to be significantly different from those the pre-competition training. These data show that the preliminary competitive stress induced additional significant changes of β-endorphin pattern. It would reflect the need of a long-lasting modulation of fatigue and pain perception related to the effect of an additional physical and mental effort for the consecutive competitive and training sessions. PMID:28246449

Effects of Three Types of Digital Camera Sensors on Dental Specialists' Perception of Smile Esthetics: A Preliminary Double-Blind Clinical Trial.

PubMed

Sajjadi, Seyed Hadi; Khosravanifard, Behnam; Moazzami, Fatemeh; Rakhshan, Vahid; Esmaeilpour, Mozhgan

2016-12-01

The effect of image quality or dental specialties on the subjective judgment of facial beauty has not been evaluated in any study. This study assessed the effect of digital sensors and specialties on the perception of smile beauty. In the first phase of this double-blind clinical trial, 40 female smile photographs (taken from dental students) were evaluated by a panel of three prosthodontists, six orthodontists, and three specialists in restorative dentistry to select the most beautiful smiles. In the second phase, the 20 students having the most appealing smiles were again photographed in standard conditions, but this time with three different digital sensors: full-frame 21.1-megapixel, half-frame 18.0-megapixel, and compact 10.4-megapixel. The same panel judged smile beauty on a visual analog scale. The referees were blinded to the type of sensors, and the images were all coded. The data were analyzed using two-way ANOVA, Kruskal-Wallis, and Mann-Whitney U tests (α = 0.05 and 0.0167). The mean scores for full-frame, half-frame, and compact sensors were 6.70 ± 1.30, 4.56 ± 1.29, and 4.40 ± 1.39 [out of 10], respectively (Kruskal-Wallis p < 0.0001). The differences between the full-frame and the other sensors were statistically significant (Mann-Whitney p < 0.01); however, the difference between the half-frame and compact sensors was not statistically significant (p > 0.1). Sensors (ANOVA p < 0.00001) but not specialties (p = 0.687) affected the perception of beauty. According to the results of this study, image quality affected the perception of smile beauty. The full-frame sensor produced consistently better results and was recommended over half-frame and compact sensors. Dentists of different specialties might have similar standards of smile beauty, although this needs further assessment. © 2015 by the American College of Prosthodontists.

The effect of single and repeated UVB radiation on rabbit cornea.

PubMed

Fris, Miroslav; Tessem, May-Britt; Cejková, Jitka; Midelfart, Anna

2006-12-01

Cumulative effect of ultraviolet radiation (UVR) is an important aspect of UV corneal damage. The purpose of this study was to apply high resolution magic angle spinning proton nuclear magnetic resonance (HR-MAS 1H NMR) spectroscopy to evaluate the effect of single and repeated UV radiation exposure of the same overall dose on the rabbit cornea. Corneal surfaces of 24 normal rabbit eyes were examined for the effects of UVB exposure (312 nm). In the first group (UVB1), animals were irradiated with a single dose (3.12 J/cm2; 21 min) of UVB radiation. The animals in the second group (UVB2) were irradiated three times for 7 min every other day (dose of 1.04 J/cm2; days 1, 3, 5) to give the same overall dose (3.12 J/cm2). The third group served as an untreated control group. One day after the last irradiation, the animals were sacrificed, and the corneas were removed and frozen. HR-MAS 1H NMR spectra from intact corneas were obtained. Special grouping patterns among the tissue samples and the relative percentage changes in particular metabolite concentrations were evaluated using modern statistical methods (multivariate analysis, one-way ANOVA). The metabolic profile of both groups of UVB-irradiated samples was significantly different from the control corneas. Substantial decreases in taurine, hypo-taurine and choline-derivatives concentrations and substantial elevation in glucose and betaine levels were observed following the UVR exposure. There was no significant difference between the effect of a single and repeated UVB irradiation of the same overall dose. For the first time, the effects of single and repeated UVR doses on the metabolic profile of the rabbit cornea were analysed and compared. The combination of HR-MAS 1H NMR spectroscopy and modern statistical methods (multivariate analysis, one-way ANOVA) proved suitable to assess the overall view of the metabolic alterations in the rabbit corneal tissue following UVB radiation exposure.

Pharmacokinetic analysis and comparison of caffeine administered rapidly or slowly in coffee chilled or hot versus chilled energy drink in healthy young adults.

PubMed

White, John R; Padowski, Jeannie M; Zhong, Yili; Chen, Gang; Luo, Shaman; Lazarus, Philip; Layton, Matthew E; McPherson, Sterling

2016-01-01

There is a paucity of data describing the impact of type of beverage (coffee versus energy drink), different rates of consumption and different temperature of beverages on the pharmacokinetic disposition of caffeine. Additionally, there is concern that inordinately high levels of caffeine may result from the rapid consumption of cold energy drinks. The objective of this study was to compare the pharmacokinetics of caffeine under various drink temperature, rate of consumption and vehicle (coffee versus energy drink) conditions. Five caffeine (dose = 160 mg) conditions were evaluated in an open-label, group-randomized, crossover fashion. After the administration of each caffeine dose, 10 serial plasma samples were harvested. Caffeine concentration was measured via liquid chromatography-mass spectrometry (LC-MS), and those concentrations were assessed by non-compartmental pharmacokinetic analysis. The calculated mean pharmacokinetic parameters were analyzed statistically by one-way repeated measures analysis of variance (RM ANOVA). If differences were found, each group was compared to the other by all pair-wise multiple comparison. Twenty-four healthy subjects ranging in age from 18 to 30 completed the study. The mean caffeine concentration time profiles were similar with overlapping SDs at all measured time points. The ANOVA revealed significant differences in mean Cmax and Vd ss/F, but no pair-wise comparisons reached statistical significance. No other differences in pharmacokinetic parameters were found. The results of this study are consistent with previous caffeine pharmacokinetic studies and suggest that while rate of consumption, temperature of beverage and vehicle (coffee versus energy drink) may be associated with slightly different pharmacokinetic parameters, the overall impact of these variables is small. This study suggests that caffeine absorption and exposure from coffee and energy drink is similar irrespective of beverage temperature or rate of consumption.

Lifestyle Change Plus Dental Care (LCDC) program improves knowledge, attitude, and practice (KAP) toward oral health and diabetes mellitus among the elderly with type 2 diabetes.

PubMed

Saengtipbovorn, Saruta; Taneepanichskul, Surasak

2015-03-01

Currently, there is an increased prevalence of diabetes mellitus among the elderly. Chronic inflammation from diabetes mellitus effects glycemic control and increases risk of diabetes complications. To assess the effectiveness of a Lifestyle Change plus Dental Care (LCDC) program by improved knowledge, attitude, and practice (KAP) toward oral health and diabetes mellitus among the elderly with type 2 diabetes. A quasi-experimental study was conducted in two Health Centers (HC 54 intervention and HC 59 control) between October 2013 and April 2014. Sixty-six diabetic patients per health center were recruited. At baseline, the intervention group attended a 20-minute lifestyle and oral health education program, individual lifestyle counseling using motivational interviewing, application of self-regulation manual, and individual oral hygiene instruction. At 3-month follow-up, the intervention group received individual lifestyle counseling and oral hygiene instruction. The intervention group received booster education every visit by viewing a 15-minute educational video. The control group received the routine program. Participants were assessed at baseline, 3-month, and 6-month follow-up for knowledge, attitude, and practice (KAP) toward oral health and diabetes mellitus. Data was analyzed by using descriptive statistic, Chi-square test, Fisher's exact test, and repeated measure ANOVA. After the 6-month follow-up, repeated measure ANOVA analysis showed that participants in the intervention group had significantly higher knowledge and attitude toward oral health and diabetes mellitus. The participants in the intervention group were more likely to exercise, modify diet, have foot examinations, always wear covered shoes, participate in self-feet screening, use dental floss, and use inter-proximal brush than the control group with statistically significant differences. The combination of lifestyle change and dental care in one program improved knowledge, attitude, andpractice (KAP) toward oral health and diabetes mellitus in the elderly with type 2 diabetes. Trial registration: ClinicalTrials.in.th: TCTR20140602001.

Cervical and Incisal Marginal Discrepancy in Ceramic Laminate Veneering Materials: A SEM Analysis.

PubMed

Ranganathan, Hemalatha; Ganapathy, Dhanraj M; Jain, Ashish R

2017-01-01

Marginal discrepancy influenced by the choice of processing material used for the ceramic laminate veneers needs to be explored further for better clinical application. This study aimed to evaluate the amount of cervical and incisal marginal discrepancy associated with different ceramic laminate veneering materials. This was an experimental, single-blinded, in vitro trial. Ten central incisors were prepared for laminate veneers with 2 mm uniform reduction and heavy chamfer finish line. Ceramic laminate veneers fabricated over the prepared teeth using four different processing materials were categorized into four groups as Group I - aluminous porcelain veneers, Group II - lithium disilicate ceramic veneers, Group III - lithium disilicate-leucite-based veneers, Group IV - zirconia-based ceramic veneers. The cervical and incisal marginal discrepancy was measured using a scanning electron microscope. ANOVA and post hoc Tukey honest significant difference (HSD) tests were used for statistical analysis. The cervical and incisal marginal discrepancy for four groups was Group I - 114.6 ± 4.3 μm, 132.5 ± 6.5 μm, Group II - 86.1 ± 6.3 μm, 105.4 ± 5.3 μm, Group III - 71.4 ± 4.4 μm, 91.3 ± 4.7 μm, and Group IV - 123.1 ± 4.1 μm, 142.0 ± 5.4 μm. ANOVA and post hoc Tukey HSD tests observed a statistically significant difference between the four test specimens with regard to cervical marginal discrepancy. The cervical and incisal marginal discrepancy scored F = 243.408, P < 0.001 and F = 180.844, P < 0.001, respectively. This study concluded veneers fabricated using leucite reinforced lithium disilicate exhibited the least marginal discrepancy followed by lithium disilicate ceramic, aluminous porcelain, and zirconia-based ceramics. The marginal discrepancy was more in the incisal region than in the cervical region in all the groups.

A comparison of the wear resistance and hardness of indirect composite resins.

PubMed

Mandikos, M N; McGivney, G P; Davis, E; Bush, P J; Carter, J M

2001-04-01

Various new, second-generation indirect composites have been developed with claimed advantages over existing tooth-colored restorative materials. To date, little independent research has been published on these materials, and the properties specified in the advertising materials are largely derived from in-house or contracted testing. Four second-generation indirect composites (Artglass, belleGlass, Sculpture, and Targis) were tested for wear resistance and hardness against 2 control materials with well-documented clinical application. Human enamel was also tested for comparison. Twelve specimens of each material were fabricated according to the manufacturers' directions and subjected to accelerated wear in a 3-body abrasion, toothbrushing apparatus. Vickers hardness was measured for each of the tested materials, and energy dispersive x-ray (EDX) spectroscopy was performed to determine the elemental composition of the composite fillers. The statistical tests used for wear and hardness were the Kruskal-Wallis 1-way ANOVA test with Mann-Whitney tests and 1-way ANOVA with multiple comparisons (Tukey HSD). The Pearson correlation coefficient was used to determine the existence of a relationship between the hardness of the materials and the degree to which they had worn. The level of statistical significance chosen was alpha=.05. The control material Concept was superior to the other composites in wear resistance and hardness and had the lowest surface roughness. Significant relationships were observed between depth of wear and hardness and between depth of wear and average surface roughness. Enamel specimens were harder and more wear resistant than any of the composites. EDX spectroscopy revealed that the elemental composition of the fillers of the 4 new composites was almost identical, as was the composition of the 2 control composites. The differences in wear, hardness, and average surface roughness may have been due to differences in the chemistry or method of polymerization of the composites. Further research in this area should be encouraged. It was also apparent that the filler present in the tested composites did not exactly fit the manufacturers' descriptions.

Pharmacokinetic analysis and comparison of caffeine administered rapidly or slowly in coffee chilled or hot versus chilled energy drink in healthy young adults

PubMed Central

White, John R.; Padowski, Jeannie M.; Zhong, Yili; Chen, Gang; Luo, Shaman; Lazarus, Philip; Layton, Matthew E.; McPherson, Sterling

2016-01-01

Abstract Context: There is a paucity of data describing the impact of type of beverage (coffee versus energy drink), different rates of consumption and different temperature of beverages on the pharmacokinetic disposition of caffeine. Additionally, there is concern that inordinately high levels of caffeine may result from the rapid consumption of cold energy drinks. Objective: The objective of this study was to compare the pharmacokinetics of caffeine under various drink temperature, rate of consumption and vehicle (coffee versus energy drink) conditions. Materials: Five caffeine (dose = 160 mg) conditions were evaluated in an open-label, group-randomized, crossover fashion. After the administration of each caffeine dose, 10 serial plasma samples were harvested. Caffeine concentration was measured via liquid chromatography–mass spectrometry (LC–MS), and those concentrations were assessed by non-compartmental pharmacokinetic analysis. The calculated mean pharmacokinetic parameters were analyzed statistically by one-way repeated measures analysis of variance (RM ANOVA). If differences were found, each group was compared to the other by all pair-wise multiple comparison. Results: Twenty-four healthy subjects ranging in age from 18 to 30 completed the study. The mean caffeine concentration time profiles were similar with overlapping SDs at all measured time points. The ANOVA revealed significant differences in mean C max and V d ss/F, but no pair-wise comparisons reached statistical significance. No other differences in pharmacokinetic parameters were found. Discussion: The results of this study are consistent with previous caffeine pharmacokinetic studies and suggest that while rate of consumption, temperature of beverage and vehicle (coffee versus energy drink) may be associated with slightly different pharmacokinetic parameters, the overall impact of these variables is small. Conclusion: This study suggests that caffeine absorption and exposure from coffee and energy drink is similar irrespective of beverage temperature or rate of consumption. PMID:27100333

3D and 2D marginal fit of pressed and CAD/CAM lithium disilicate crowns made from digital and conventional impressions.

PubMed

Anadioti, Evanthia; Aquilino, Steven A; Gratton, David G; Holloway, Julie A; Denry, Isabelle; Thomas, Geb W; Qian, Fang

2014-12-01

This in vitro study evaluated the 3D and 2D marginal fit of pressed and computer-aided-designed/computer-aided-manufactured (CAD/CAM) all-ceramic crowns made from digital and conventional impressions. A dentoform tooth (#30) was prepared for an all-ceramic crown (master die). Thirty type IV definitive casts were made from 30 polyvinyl siloxane (PVS) impressions. Thirty resin models were produced from thirty Lava Chairside Oral Scanner impressions. Thirty crowns were pressed in lithium disilicate (IPS e.max Press; 15/impression technique). Thirty crowns were milled from lithium disilicate blocks (IPS e.max CAD; 15/impression technique) using the E4D scanner and milling engine. The master die and the intaglio of the crowns were digitized using a 3D laser coordinate measurement machine with accuracy of ±0.00898 mm. For each specimen a separate data set was created for the Qualify 2012 software. The digital master die and the digital intaglio of each crown were merged using best-fitting alignment. An area above the margin with 0.75 mm occlusal-gingival width circumferentially was defined. The 3D marginal fit of each specimen was an average of all 3D gap values on that area. For the 2D measurements, the marginal gap was measured at two standardized points (on the margin and at 0.75 mm above the margin), from standardized facial-lingual and mesial-distal digitized sections. One-way ANOVA with post hoc Tukey's honestly significant difference and two-way ANOVA tests were used, separately, for statistical analysis of the 3D and 2D marginal data (alpha = 0.05). One-way ANOVA revealed that both 3D and 2D mean marginal gap for group A: PVS impression/IPS e.max Press (0.048 mm ± 0.009 and 0.040 mm ± 0.009) were significantly smaller than those obtained from the other three groups (p < 0.0001), while no significant differences were found among groups B: PVS impression/IPS e.max CAD (0.088 mm ± 0.024 and 0.076 mm ± 0.023), C: digital impression/IPS e.max Press (0.089 mm ± 0.020 and 0.075 mm ± 0.015) and D: digital impression/IPS e.max CAD (0.084 mm ± 0.021 and 0.074 mm ± 0.026). The results of two-way ANOVA revealed a significant interaction between impression techniques and crown fabrication methods for both 3D and 2D measurements. The combination of PVS impression method and press fabrication technique produced the most accurate 3D and 2D marginal fits. © 2014 by the American College of Prosthodontists.

Debris Evaluation after Root Canal Shaping with Rotating and Reciprocating Single-File Systems

PubMed Central

Dagna, Alberto; Gastaldo, Giulia; Beltrami, Riccardo; Poggio, Claudio

2016-01-01

This study evaluated the root canal dentine surface by scanning electron microscope (SEM) after shaping with two reciprocating single-file NiTi systems and two rotating single-file NiTi systems, in order to verify the presence/absence of the smear layer and the presence/absence of open tubules along the walls of each sample; Forty-eight single-rooted teeth were divided into four groups and shaped with OneShape (OS), F6 SkyTaper (F6), WaveOne (WO) and Reciproc and irrigated using 5.25% NaOCl and 17% EDTA. Root canal walls were analyzed by SEM at a standard magnification of 2500×. The presence/absence of the smear layer and the presence/absence of open tubules at the coronal, middle, and apical third of each canal were estimated using a five-step scale for scores. Numeric data were analyzed using Kruskal-Wallis and Mann-Whitney U statistical tests and significance was predetermined at P < 0.05; The Kruskal-Wallis ANOVA for debris score showed significant differences among the NiTi systems (P < 0.05). The Mann-Whitney test confirmed that reciprocating systems presented significantly higher score values than rotating files. The same results were assessed considering the smear layer scores. ANOVA confirmed that the apical third of the canal maintained a higher quantity of debris and smear layer after preparation of all the samples; Single-use NiTi systems used in continuous rotation appeared to be more effective than reciprocating instruments in leaving clean walls. The reciprocating systems produced more debris and smear layer than rotating instruments. PMID:27763503

Does the Aging Process Significantly Modify the Mean Heart Rate?

PubMed Central

Santos, Marcos Antonio Almeida; Sousa, Antonio Carlos Sobral; Reis, Francisco Prado; Santos, Thayná Ramos; Lima, Sonia Oliveira; Barreto-Filho, José Augusto

2013-01-01

Background The Mean Heart Rate (MHR) tends to decrease with age. When adjusted for gender and diseases, the magnitude of this effect is unclear. Objective To analyze the MHR in a stratified sample of active and functionally independent individuals. Methods A total of 1,172 patients aged ≥ 40 years underwent Holter monitoring and were stratified by age group: 1 = 40-49, 2 = 50-59, 3 = 60-69, 4 = 70-79, 5 = ≥ 80 years. The MHR was evaluated according to age and gender, adjusted for Hypertension (SAH), dyslipidemia and non-insulin dependent diabetes mellitus (NIDDM). Several models of ANOVA, correlation and linear regression were employed. A two-tailed p value <0.05 was considered significant (95% CI). Results The MHR tended to decrease with the age range: 1 = 77.20 ± 7.10; 2 = 76.66 ± 7.07; 3 = 74.02 ± 7.46; 4 = 72.93 ± 7.35; 5 = 73.41 ± 7.98 (p < 0.001). Women showed a correlation with higher MHR (p <0.001). In the ANOVA and regression models, age and gender were predictors (p < 0.001). However, R2 and ETA2 < 0.10, as well as discrete standardized beta coefficients indicated reduced effect. Dyslipidemia, hypertension and DM did not influence the findings. Conclusion The MHR decreased with age. Women had higher values of MHR, regardless of the age group. Correlations between MHR and age or gender, albeit significant, showed the effect magnitude had little statistical relevance. The prevalence of SAH, dyslipidemia and diabetes mellitus did not influence the results. PMID:24029962

Long-term experimental warming alters nitrogen-cycling communities but site factors remain the primary drivers of community structure in high arctic tundra soils.

PubMed

Walker, Jennifer K M; Egger, Keith N; Henry, Gregory H R

2008-09-01

Arctic air temperatures are expected to rise significantly over the next century. Experimental warming of arctic tundra has been shown to increase plant productivity and cause community shifts and may also alter microbial community structure. Hence, the objective of this study was to determine whether experimental warming caused shifts in soil microbial communities by measuring changes in the frequency, relative abundance and/or richness of nosZ and nifH genotypes. Five sites at a high arctic coastal lowland were subjected to a 13-year warming experiment using open-top chambers (OTCs). Sites differed by dominant plant community, soil parent material and/or moisture regimen. Six soil cores were collected from each of four replicate OTC and ambient plots at each site and subdivided into upper and lower samples. Differences in frequency and relative abundance of terminal restriction fragments were assessed graphically by two-way cluster analysis and tested statistically with permutational multivariate analysis of variance (ANOVA). Genotypic richness was compared using factorial ANOVA. The genotype frequency, relative abundance and genotype richness of both nosZ and nifH communities differed significantly by site, and by OTC treatment and/or depth at some sites. The site that showed the most pronounced treatment effect was a wet sedge meadow, where community structure and genotype richness of both nosZ and nifH were significantly affected by warming. Although warming was an important factor affecting these communities at some sites at this high arctic lowland, overall, site factors were the main determinants of community structure.

A comparative evaluation of efficacy of protaper universal rotary retreatment system for gutta-percha removal with or without a solvent.

PubMed

Kumar, M Sita Ram; Sajjan, Girija S; Satish, Kalyan; Varma, K Madhu

2012-09-01

The aim was to evaluate and compare the efficacy of ProTaper Universal rotary retreatment system with or without solvent and stainless steel hand files for endodontic filling removal from root canals and also to compare retreatment time for each system. Thirty extracted mandibular premolars with single straight canals were endodontically treated. Teeth were divided into three major groups, having 10 specimens each. Removal of obturating material in group 1 by stainless steel hand files with RC Solve, group 2 by ProTaper Universal retreatment instruments and group 3 by ProTaper Universal retreatment instruments along with RC solve was done. Retreatment was considered complete for all groups when no filling material was observed on the instruments. The retreatment time was recorded for each tooth. All specimens were grooved longitudinally in a buccolingual direction. The split halves were examined under a stereomicroscope and images were captured and analyzed. The remaining filling debris area ratios were considered for statistical analysis. With ANOVA test, statistical analysis showed that there was statistically no significant difference regarding the amount of filling remnants between the groups (P < 0.05). Differences between the means of groups are statistically significant regarding the retreatment time. Irrespective of the technique used, all the specimens had some remnants on the root canal wall. ProTaper Universal retreatment system files alone proved to be faster than the other experimental groups.

Biomechanical influence of crown-to-implant ratio on stress distribution over internal hexagon short implant: 3-D finite element analysis with statistical test.

PubMed

Ramos Verri, Fellippo; Santiago Junior, Joel Ferreira; de Faria Almeida, Daniel Augusto; de Oliveira, Guilherme Bérgamo Brandão; de Souza Batista, Victor Eduardo; Marques Honório, Heitor; Noritomi, Pedro Yoshito; Pellizzer, Eduardo Piza

2015-01-02

The study of short implants is relevant to the biomechanics of dental implants, and research on crown increase has implications for the daily clinic. The aim of this study was to analyze the biomechanical interactions of a singular implant-supported prosthesis of different crown heights under vertical and oblique force, using the 3-D finite element method. Six 3-D models were designed with Invesalius 3.0, Rhinoceros 3D 4.0, and Solidworks 2010 software. Each model was constructed with a mandibular segment of bone block, including an implant supporting a screwed metal-ceramic crown. The crown height was set at 10, 12.5, and 15 mm. The applied force was 200 N (axial) and 100 N (oblique). We performed an ANOVA statistical test and Tukey tests; p<0.05 was considered statistically significant. The increase of crown height did not influence the stress distribution on screw prosthetic (p>0.05) under axial load. However, crown heights of 12.5 and 15 mm caused statistically significant damage to the stress distribution of screws and to the cortical bone (p<0.001) under oblique load. High crown to implant (C/I) ratio harmed microstrain distribution on bone tissue under axial and oblique loads (p<0.001). Crown increase was a possible deleterious factor to the screws and to the different regions of bone tissue. Copyright © 2014 Elsevier Ltd. All rights reserved.

Exploring Preferences of Mentoring Activities among Generational Groups of Registered Nurses in Florida

ERIC Educational Resources Information Center

Posey-Goodwin, Patricia Ann

2013-01-01

The purpose of this study was to explore differences in perceptions of mentoring activities from four generations of registered nurses in Florida, using the Alleman Mentoring Activities Questionnaire ® (AMAQ ®). Statistical procedures of analysis of variance (ANOVA) were employed to explore differences among 65 registered nurses in Florida from…

Bootstrapping in Applied Linguistics: Assessing Its Potential Using Shared Data

ERIC Educational Resources Information Center

Plonsky, Luke; Egbert, Jesse; Laflair, Geoffrey T.

2015-01-01

Parametric analyses such as t tests and ANOVAs are the norm--if not the default--statistical tests found in quantitative applied linguistics research (Gass 2009). Applied statisticians and one applied linguist (Larson-Hall 2010, 2012; Larson-Hall and Herrington 2010), however, have argued that this approach may not be appropriate for small samples…

Inquiring the Most Critical Teacher's Technology Education Competences in the Highest Efficient Technology Education Learning Organization

ERIC Educational Resources Information Center

Yung-Kuan, Chan; Hsieh, Ming-Yuan; Lee, Chin-Feng; Huang, Chih-Cheng; Ho, Li-Chih

2017-01-01

Under the hyper-dynamic education situation, this research, in order to comprehensively explore the interplays between Teacher Competence Demands (TCD) and Learning Organization Requests (LOR), cross-employs the data refined method of Descriptive Statistics (DS) method and Analysis of Variance (ANOVA) and Principal Components Analysis (PCA)…

Time Spent on the Internet by Multicultural Adolescents in Korea

ERIC Educational Resources Information Center

Lim, Yangmi; Nam, Su-Jung

2017-01-01

This study analysed "The 8th Online Survey of Adolescent Health and Behaviour in 2012", which is a government-approved statistical survey of Internet use and patterns in Korea. We conducted a propensity score matching (PSM) to control for economic status differences between monocultural and multicultural families and an ANOVA to estimate…

Robust Optimum Invariant Tests for Random MANOVA Models.

DTIC Science & Technology

1986-10-01

are assumed to be independent normal with zero mean and dispersion o2 and o72 respectively, Roy and Gnanadesikan (1959) considered the prob- 2 2 lem of...Part II: The multivariate case. Ann. Math. Statist. 31, 939-968. [7] Roy, S.N. and Gnanadesikan , R. (1959). Some contributions to ANOVA in one or more

The relationship between corn particle size and thermoregulation of laying hens in an equatorial semi-arid environment.

PubMed

de Souza, João Batista Freire; de Morais Oliveira, Vanessa Raquel; de Arruda, Alex Martins Varela; de Melo Silva, Aurora; de Macedo Costa, Leonardo Lelis

2015-01-01

Heat stress is one of the main factors affecting egg production. One way to improve egg production is physical processing of the feed ingredients, allowing for better utilization of nutrients. In this study, the relationship between the corn particle size, measured as the geometric mean diameter (GMD), and thermoregulation was evaluated by determining the effect of the GMD on performance, egg quality, and physiological responses. Feed intake, eggshell quality (weight and thickness), rectal temperature (T R), respiratory rate (R R), and surface temperature (T S) were recorded in sixty 20-week-old naked neck laying hens that were fed corn of different particle sizes. Ambient temperature (T A) was also recorded during the trial. The GMD of corn particles was determined using a screens granulometer, resulting in sizes of 605, 1,030, and 2,280 μm. The analysis of variance (ANOVA) of a completely randomized design showed a significant effect (P < 0.05) of GMD on feed intake, shell weight, and shell thickness. The ANOVA performed by the least squares method showed a highly significant effect (P < 0.01) of GMD on T R and R R. T A, categorized into three classes (24.0-26, 26.1-28.9, and 29.0-31.0 °C), had a significant effect (P < 0.01) on T R and T S. The interaction between the GMD of corn particles and the T A classes was not statistically significant. Coarser corn particles cause an increase in the rectal temperature of naked neck hens, and these birds increase their respiratory rate to dissipate excess metabolic heat. This increase in the respiratory rate causes a decrease in the eggshell quality.

Impact of Intentional Overload on Joint Stability of Internal Implant-Abutment Connection System with Different Diameter.

PubMed

Lee, Ji-Hye; Lee, Won; Huh, Yoon-Hyuk; Park, Chan-Jin; Cho, Lee-Ra

2017-09-05

To evaluate the axial displacement of the implant-abutment assembly of different implant diameter after static and cyclic loading of overload condition. An internal conical connection system with three diameters (Ø 4.0, 4.5, and 5.0) applying identical abutment dimension and the same abutment screw was evaluated. Axial displacement of abutment and reverse torque loss of abutment screw were evaluated under static and cyclic loading conditions. Static loading test groups were subjected to vertical static loading of 250, 400, 500, 600, 700, and 800 N consecutively. Cyclic loading test groups were subjected to 500 N cyclic loading to evaluate the effect of excessive masticatory loading. After abutment screw tightening for 30 Ncm, axial displacement was measured upon 1, 3, 10, and 1,000,000 cyclic loadings of 500 N. Repeated-measure ANOVA and 2-way ANOVA were used for statistical analysis (α = 0.05). The increasing magnitude of vertical load and thinner wall thickness of implant increased axial displacement of abutment and reverse torque loss of abutment screw (p < 0.05). Implants in the Ø 5.0 diameter group demonstrated significantly low axial displacement, and reverse torque loss after static loading than Ø 4.0 and Ø 4.5 diameter groups (p < 0.05). In the cyclic loading test, all diameter groups of implant showed significant axial displacement after 1 cycle of loading of 500 N (p < 0.05). There was no significant axial displacement after 3, 10, or 1,000,000 cycles of loading (p = 0.603). Implants with Ø 5.0 diameter demonstrated significantly low axial displacement and reverse torque loss after the cyclic and static loading of overload condition. © 2017 by the American College of Prosthodontists.

The relationship between corn particle size and thermoregulation of laying hens in an equatorial semi-arid environment

NASA Astrophysics Data System (ADS)

de Souza, João Batista Freire; de Morais Oliveira, Vanessa Raquel; de Arruda, Alex Martins Varela; de Melo Silva, Aurora; de Macedo Costa, Leonardo Lelis

2015-01-01

Heat stress is one of the main factors affecting egg production. One way to improve egg production is physical processing of the feed ingredients, allowing for better utilization of nutrients. In this study, the relationship between the corn particle size, measured as the geometric mean diameter (GMD), and thermoregulation was evaluated by determining the effect of the GMD on performance, egg quality, and physiological responses. Feed intake, eggshell quality (weight and thickness), rectal temperature ( T R), respiratory rate ( R R), and surface temperature ( T S) were recorded in sixty 20-week-old naked neck laying hens that were fed corn of different particle sizes. Ambient temperature ( T A) was also recorded during the trial. The GMD of corn particles was determined using a screens granulometer, resulting in sizes of 605, 1,030, and 2,280 μm. The analysis of variance (ANOVA) of a completely randomized design showed a significant effect ( P < 0.05) of GMD on feed intake, shell weight, and shell thickness. The ANOVA performed by the least squares method showed a highly significant effect ( P < 0.01) of GMD on T R and R R. T A, categorized into three classes (24.0-26, 26.1-28.9, and 29.0-31.0 °C), had a significant effect ( P < 0.01) on T R and T S. The interaction between the GMD of corn particles and the T A classes was not statistically significant. Coarser corn particles cause an increase in the rectal temperature of naked neck hens, and these birds increase their respiratory rate to dissipate excess metabolic heat. This increase in the respiratory rate causes a decrease in the eggshell quality.

Goodness-Of-Fit Test for Nonparametric Regression Models: Smoothing Spline ANOVA Models as Example.

PubMed

Teran Hidalgo, Sebastian J; Wu, Michael C; Engel, Stephanie M; Kosorok, Michael R

2018-06-01

Nonparametric regression models do not require the specification of the functional form between the outcome and the covariates. Despite their popularity, the amount of diagnostic statistics, in comparison to their parametric counter-parts, is small. We propose a goodness-of-fit test for nonparametric regression models with linear smoother form. In particular, we apply this testing framework to smoothing spline ANOVA models. The test can consider two sources of lack-of-fit: whether covariates that are not currently in the model need to be included, and whether the current model fits the data well. The proposed method derives estimated residuals from the model. Then, statistical dependence is assessed between the estimated residuals and the covariates using the HSIC. If dependence exists, the model does not capture all the variability in the outcome associated with the covariates, otherwise the model fits the data well. The bootstrap is used to obtain p-values. Application of the method is demonstrated with a neonatal mental development data analysis. We demonstrate correct type I error as well as power performance through simulations.

Effects of topical benzocaine and lignocaine on upper airway reflex sensitivity.

PubMed

Raphael, J H; Stanley, G D; Langton, J A

1996-02-01

We studied the degree and duration of effect on upper airway reflex sensitivity of oral benzocaine lozenges, nebulised lignocaine and lignocaine sprayed onto the vocal cords under direct vision, using low concentrations of ammonia as a stimulus to upper airway receptors. Ten minutes after the administration of oral benzocaine 20 mg the threshold response of the upper airway to ammonia (NH3TR) had risen significantly from baseline mean (SEM) of 680 (95) to 975 (109) ppm of ammonia with a return to baseline values after 25 min (n = 8, p < 0.05, repeated measures of ANOVA; p < 0.001, t-test). A direct spray of lignocaine 100 mg onto the vocal cords resulted in a significant elevation in NH3TR from a baseline mean (SEM) of 665 (81) to a maximum of 1600 (88) ppm of ammonia with a significant elevation in the threshold persisting for 100 min (n = 7, p < 0.001, repeated measures of ANOVA; p < 0.05, t-test). The application of 4% nebulised lignocaine 4 ml significantly increased NH3TR from a baseline mean (SEM) of 770 (56) to a maximum of 1190 (63) ppm of ammonia with a significant elevation in the threshold persisting for 30 min (n = 8, p < 0.001, repeated measures of ANOVA; p < 0.05, t-test). The maximum elevations in NH3TR with the two methods of lignocaine delivery were significantly different (p < 0.01, 2-way ANOVA).

Validation of a Task Network Human Performance Model of Driving

DTIC Science & Technology

2007-04-01

34 Table 23. NASA - TLX scores for study conditions...35 Table 24. ANOVA for NASA - TLX scores for study conditions (α = 0.05)...............................35 Table 25...Significant difference between conditions for NASA - TLX in the simulator study.....36 Table 26. ANOVA table for mental demand subscale of NASA - TLX

[Teaching performance assessment in Public Health employing three different strategies].

PubMed

Martínez-González, Adrián; Moreno-Altamirano, Laura; Ponce-Rosas, Efrén Raúl; Martínez-Franco, Adrián Israel; Urrutia-Aguilar, María Esther

2011-01-01

The educational system depends upon the quality and performance of their faculty and should therefore be process of continuous improvement. To assess the teaching performance of the Public Health professors, at the Faculty of Medicine, UNAM through three strategies. Justification study. The evaluation was conducted under a mediational model through three strategies: students' opinion assessment, self-assessment and students' academic achievement. We applied descriptive statistics, Student t test, ANOVA and Pearson correlation. Twenty professors were evaluated from the Public Health department, representing 57% of all them who teach the subject. The professor's performance was highly valued self-assessment compared with assessment of student opinion, was confirmed by statistical analysis the difference was significant. The difference amongst the three evaluation strategies became more evident between self-assessment and the scores obtained by students in their academic achievement. The integration of these three strategies offers a more complete view of the teacher's performance quality. Academic achievement appears to be a more objective strategy for teaching performance assessment than students' opinion and self-assessment.

Data on xylem sap proteins from Mn- and Fe-deficient tomato plants obtained using shotgun proteomics.

PubMed

Ceballos-Laita, Laura; Gutierrez-Carbonell, Elain; Takahashi, Daisuke; Abadía, Anunciación; Uemura, Matsuo; Abadía, Javier; López-Millán, Ana Flor

2018-04-01

This article contains consolidated proteomic data obtained from xylem sap collected from tomato plants grown in Fe- and Mn-sufficient control, as well as Fe-deficient and Mn-deficient conditions. Data presented here cover proteins identified and quantified by shotgun proteomics and Progenesis LC-MS analyses: proteins identified with at least two peptides and showing changes statistically significant (ANOVA; p ≤ 0.05) and above a biologically relevant selected threshold (fold ≥ 2) between treatments are listed. The comparison between Fe-deficient, Mn-deficient and control xylem sap samples using a multivariate statistical data analysis (Principal Component Analysis, PCA) is also included. Data included in this article are discussed in depth in the research article entitled "Effects of Fe and Mn deficiencies on the protein profiles of tomato ( Solanum lycopersicum) xylem sap as revealed by shotgun analyses" [1]. This dataset is made available to support the cited study as well to extend analyses at a later stage.

Comparative study of coated and uncoated tool inserts with dry machining of EN47 steel using Taguchi L9 optimization technique

NASA Astrophysics Data System (ADS)

Vasu, M.; Shivananda, Nayaka H.

2018-04-01

EN47 steel samples are machined on a self-centered lathe using Chemical Vapor Deposition of coated TiCN/Al2O3/TiN and uncoated tungsten carbide tool inserts, with nose radius 0.8mm. Results are compared with each other and optimized using statistical tool. Input (cutting) parameters that are considered in this work are feed rate (f), cutting speed (Vc), and depth of cut (ap), the optimization criteria are based on the Taguchi (L9) orthogonal array. ANOVA method is adopted to evaluate the statistical significance and also percentage contribution for each model. Multiple response characteristics namely cutting force (Fz), tool tip temperature (T) and surface roughness (Ra) are evaluated. The results discovered that coated tool insert (TiCN/Al2O3/TiN) exhibits 1.27 and 1.29 times better than the uncoated tool insert for tool tip temperature and surface roughness respectively. A slight increase in cutting force was observed for coated tools.

Rainfall Threshold Assessment Corresponding to the Maximum Allowable Turbidity for Source Water.

PubMed

Fan, Shu-Kai S; Kuan, Wen-Hui; Fan, Chihhao; Chen, Chiu-Yang

2016-12-01

  This study aims to assess the upstream rainfall thresholds corresponding to the maximum allowable turbidity of source water, using monitoring data and artificial neural network computation. The Taipei Water Source Domain was selected as the study area, and the upstream rainfall records were collected for statistical analysis. Using analysis of variance (ANOVA), the cumulative rainfall records of one-day Ping-lin, two-day Ping-lin, two-day Tong-hou, one-day Guie-shan, and one-day Tai-ping (rainfall in the previous 24 or 48 hours at the named weather stations) were found to be the five most significant parameters for downstream turbidity development. An artificial neural network model was constructed to predict the downstream turbidity in the area investigated. The observed and model-calculated turbidity data were applied to assess the rainfall thresholds in the studied area. By setting preselected turbidity criteria, the upstream rainfall thresholds for these statistically determined rain gauge stations were calculated.

Bond strengths of custom cast and prefabricated posts luted with two cements.

PubMed

Aleisa, Khalil Ibrahim

2011-02-01

This in vitro study evaluated the bond strength of custom cast and prefabricated posts luted with resin or zinc phosphate cements into unobturated canals of extracted teeth. Forty-eight custom cast and prefabricated posts were placed into extracted single-rooted human teeth. Post-cavity preparation was 1.5 mm in diameter and 10 mm in depth. Specimens were randomly divided into 4 groups of 12 each. Two of the groups were then luted with resin cement, while the other two groups were luted with zinc phosphate cement. A pull-out bond strength evaluation was performed using a universal testing machine. The Kolmogorov-Smirnov test was used to prove normal distribution. Data were statistically analyzed using two-way ANOVA and the Student t test (alpha = .05). For both luting agents, the prefabricated posts group exhibited significantly less bond strength than the custom cast posts group (P = .0001). There were statistically significant differences in mean bond strength for the prefabricated posts group luted with resin cement vs the group cemented with zinc phosphate cement (P = .002). There was no significant difference between the mean bond strength values of custom cast posts luted with resin cement or zinc phosphate cement. Custom cast posts showed significantly greater bond strength than prefabricated posts when luted with either resin or zinc phosphate cements. The type of cement had less significance on the retention of custom cast posts.

Comparative SEM analysis of nine F22 aligner cleaning strategies.

PubMed

Lombardo, Luca; Martini, Marco; Cervinara, Francesca; Spedicato, Giorgio Alfredo; Oliverio, Teresa; Siciliani, Giuseppe

2017-12-01

The orthodontics industry has paid great attention to the aesthetics of orthodontic appliances, seeking to make them as invisible as possible. There are several advantages to clear aligner systems, including aesthetics, comfort, chairside time reduction, and the fact that they can be removed for meals and oral hygiene procedures. Five patients were each given a series of F22 aligners, each to be worn for 14 days and nights, with the exception of meal and brushing times. Patients were instructed to clean each aligner using a prescribed strategy, and sections of the used aligners were observed under SEM. One grey-scale SEM image was saved per aligner in JPEG format with an 8-bit colour depth, and a total of 45 measurements on the grey scale ("Value" variable) were made. This dataset was analysed statistically via repeated measures ANOVA to determine the effect of each of the nine cleaning strategies in each of the five patients. A statistically significant difference in the efficacy of the cleaning strategies was detected. Specifically, rinsing with water alone was significantly less efficacious, and a combination of cationic detergent solution and ultrasonication was significantly more efficacious than the other methods (p < 0.05). Of the nine cleaning strategies examined, only that involving 5 min of ultrasonication at 42 k Hz combined with a 0.3% germicidal cationic detergent was observed to be statistically effective at removing the bacterial biofilm from the surface of F22 aligners.

Comparison of apical transportation between ProFile and ProTaper NiTi rotary instruments.

PubMed

Iqbal, M K; Firic, S; Tulcan, J; Karabucak, B; Kim, S

2004-06-01

To use a newly developed radiographic technique to compare apical transportation and loss of working length (WL) between.06 taper ProFile Series 29 and ProTaper nickel-titanium (NiTi) rotary instruments in vitro. Mesio-buccal canals of 40 extracted mandibular molars were randomly divided into two groups. Group 1 was instrumented with ProFile and group 2 with ProTaper instruments according to the manufacturers' directions. A specially constructed radiographic jig with a Schick digital radiographic system (Schick Technologies Inc., Long Island City, NY, USA) was used to take pre- and postoperative radiographs of the samples at predetermined angulations. Using AutoCAD 2000 (Autodesk Inc., San Rafael, CA, USA), the central axes of initial and final instruments were radiographically superimposed to determine the loss of WL and degree of transportation at D(0), D(1), D(2) and D(4) from the WL. Data were analysed using repeated-measures anova. A statistically significant difference in apical transportation was found at the D(4) level between the two groups (P = 0.05). There was no statistical significance regarding postinstrumentation change in WL between groups. Spearman's Bivariate Correlation analysis indicated no statistically significant relationship between the radius of curvature and transportation. The results indicate that both ProTaper and ProFile instruments are comparable to each other in regards to their ability to optimally enlarge root canal with minimal transportation and loss of WL in vitro.

The efficiacy of anterior and posterior archs suturation at inferior tonsillar pole for posttonsillectomy pain control.

PubMed

Sakallioğlu, Oner; Düzer, Sertaç; Kapusuz, Zeliha

2014-01-01

The aim of our study was to investigate the efficiacy of the suturation technique after completing the tonsillectomy procedure for posttonsillectomy pain control in adult patients. August 2010-February 2011, 44 adult patients, ages ranged from 16 to 41 years old who underwent tonsillectomy at Elaziğ Training and Research Hospital Otorhinolaryngology Clinic were included to the study. After tonsillectomy procedure, anterior and posterior tonsillar archs were sutured each other and so, the area of tonsillectomy lodges which covered with mucosa were increased. Twenty two patients who applied posttonsillectomy suturation were used as study group and remnant 22 patients who did not applied posttonsillectomy suturation were used as control group. The visual analogue score (VAS) was used to evaluate the postoperative pain degree (0 no pain, 10 worst pain). ANOVA test (two ways classification with repeated measures) was used for statistical analysis of VAS values. P < 0.05 was accepted as statistically significant. The effect of time (each post-operative day) on VAS values was significant. The mean VAS values between study and control group on post-operative day 1st, 3rd, 7th, and 10th were statistically significant (P < 0.05). The severity of posttonsillectomy pain was less in study group patients than control group patients. The suturation of anterior and posterior tonsillar archs after tonsillectomy procedure was found effective to alleviate the posttonsillectomy pain in adult patients.

The value of thyroid shielding in intraoral radiography

PubMed Central

Hazenoot, Bart; Sanderink, Gerard C H; Berkhout, W Erwin R

2016-01-01

Objectives: To evaluate the utility of the application of a thyroid shield in intraoral radiography when using rectangular collimation. Methods: Experimental data were obtained by measuring the absorbed dose at the position of the thyroid gland in a RANDO® (The Phantom Laboratory, Salem, NY) male phantom with a dosemeter. Four protocols were tested: round collimation and rectangular collimation, both with and without thyroid shield. Five exposure positions were deployed: upper incisor (Isup), upper canine (Csup), upper premolar (Psup), upper molar (Msup) and posterior bitewing (BW). Exposures were made with 70 kV and 7 mA and were repeated 10 times. The exposure times were as recommended for the exposure positions for the respective collimator type by the manufacturer for digital imaging. The data were statistically analyzed with a three-way ANOVA test. Significance was set at p < 0.01. Results: The ANOVA test revealed that the differences between mean doses of all protocols and geometries were statistically significant, p < 0.001. For the Isup, thyroid dose levels were comparable with both collimators at a level indicating primary beam exposure. Thyroid shield reduced this dose with circa 75%. For the Csup position, round collimation also revealed primary beam exposure, and thyroid shield yield was 70%. In Csup with rectangular collimation, the thyroid dose was reduced with a factor 4 compared with round collimation and thyroid shield yielded an additional 42% dose reduction. The thyroid dose levels for the Csup, Psup, Msup and BW exposures were lower with rectangular collimation without thyroid shield than with round collimation with thyroid shield. With rectangular collimation, the thyroid shield in Psup, Msup and BW reduced the dose 10% or less, where dose levels were already low, implying no clinical significance. Conclusions: For the exposures in the upper anterior region, thyroid shield results in an important dose reduction for the thyroid. For the other exposures, thyroid shield augments little to the reduction achieved by rectangular collimation. The use of thyroid shield is to be advised, when performing upper anterior radiography. PMID:27008105

Challenges of using Hospital Information Systems by nurses: comparing academic and non-academic hospitals.

PubMed

Ahmadian, Leila; Dorosti, Nafise; Khajouei, Reza; Gohari, Sadrieh Hajesmaeel

2017-06-01

Hospital Information Systems (HIS) are used for easy access to information, improvement of documentation and reducing errors. Nonetheless, using these systems is faced with some barriers and obstacles. This study identifies the challenges and the obstacles of using these systems in the academic and non-academic hospitals in Kerman. This is a cross-sectional study which was carried out in 2015. The statistical population in this study consisted of the nurses who had been working in the academic and non-academic hospitals in Kerman. A questionnaire consisting of two sections was used. The first section consisted of the demographic information of the participants and the second section comprised 34 questions about the challenges of HIS use. Data were analyzed by the descriptive and statistical analysis (t-test, and ANOVA) using SPSS 19 software. The most common and important challenges in the academic hospitals were about human environment factors, particularly "negative attitude of society toward using HIS". In the non-academic hospitals, the most common and important challenges were related to human factors, and among them, "no incentive to use system" was the main factor. The results of the t-test method revealed that there was a significant relationship between gender and the mean score of challenges related to the organizational environment category in the academic hospitals and between familiarity with HIS and mean score of human environment factors (p<0.05). The results of the ANOVA test also revealed that the educational degree and work experience in the healthcare environment (years) in the academic hospitals have a significant relationship with the mean score related to the hardware challenges, as well, experience with HIS has a significant relationship, with the mean score related to the human challenges (p<0.05). The most important challenges in using the information systems are the factors related to the human environment and the human factors. The results of this study can bring a good perspective to the policy makers and the managers regarding obstacles of using HISs from the nurses' perspective, so that they can solve their problems and can successfully implement these systems.

Effect of saliva decontamination procedures on shear bond strength of a one-step adhesive system.

PubMed

Ülker, E; Bilgin, S; Kahvecioğlu, F; Erkan, A I

2017-09-01

To evaluate the effect of different saliva decontamination procedures on the shear bond strength of a one-step universal adhesive system (Single Bond™ Universal Adhesive, 3M ESPE, St. Paul, MN, USA). The occlusal surfaces of 75 human third molars were ground to expose dentin. The teeth were divided into the following groups: Group 1 (control group): Single Bond™ Universal Adhesive was applied to the prepared tooth according to the manufacturer's recommendations and light cured; no contamination procedure was performed. Group 2: Bonding, light curing, saliva contamination, and dry. Group 3: Bonding, light curing, saliva contamination, rinse, and dry. Group 4: After the procedure performed in Group 2, reapplication of bonding. Group 5: After the procedure performed in Group 3, reapplication of bonding. Then, composite resins were applied with cylindrical-shaped plastic matrixes and light cured. For shear bond testing, a notch-shaped force transducer apparatus was applied to each specimen at the interface between the tooth and composite until failure occurred. The data were statistically analyzed using one-way ANOVA. One-way ANOVA revealed significant differences in shear bond strength between the control group and experimental Groups 2 and 4 (P < 0.05). No significant difference was found for experimental Groups 3 and 5 when compared to the control group (P > 0.05). The present in vitro study showed that water rinsing is necessary if cured adhesive resin is contaminated with saliva to ensure adequate bond strength.

The comparison of manual lymph drainage and ultrasound therapy on the leg swelling caused by wearing high heels.

PubMed

Lee, Dong-Yeop; Han, Ji-Su; Jang, Eun-Ji; Seo, Dong-Kwon; Hong, Ji-Heon; Lee, Sang-Sook; Lee, Dong-Geol; Yu Lee, Jae-Ho

2014-01-01

One of the major symptoms when women are wearing high heels for a long time is leg swelling. The purpose of this study was to compare the effect of manual lymph drainage with ultrasound therapy. The forty-five healthy women of twenties were participated in this study and divided randomly into three groups; manual lymph drainage group (n=15), ultrasound therapy group (n=15) and control group (n=15). Swelling was measured before wearing the high heels (10 cm-height), after one-hour of wearing the high heels, wearing the high heels of one-hour after the intervention of 15 minutes. Also swelling was calculated by using a tape measure, volumeter and body composition analyzer. Statistical analysis of the comparison between the three groups was performed by one-way ANOVA. Also comparison to the mean value in swelling according to the time was performed by repeated measure ANOVA. As the result of this study, a significant changes have emerged within each of manual lymph drainage, ultrasound therapy and control group (p< 0.05). However, there were no significant differences between each group (p> 0.05). But the mean value of manual lymph drainage group showed the tendency of fast recovering before causing swelling. Therefore, we consider that the clinical treatment of manual lymph drainage and ongoing studies will be made since manual lymph drainage is very effective in releasing the leg swelling caused by wearing high heels and standing for a long time at work.

Effects of long-term fixed orthodontic treatment on salivary nickel and chromium levels: a 1-year prospective cohort study.

PubMed

Amini, Fariborz; Rakhshan, Vahid; Mesgarzadeh, Nasim

2012-12-01

Effect of long-term orthodontic treatment on salivary nickel and chromium has not been quite assessed except in few retrospective studies with controversial results. The aim of this prospective study was to measure salivary levels of these ions during 1 year of orthodontic treatment. Saliva samples were collected from 20 orthodontic patients, before treatment (control) and 6 and 12 months later. Nickel and chromium concentrations were determined using atomic absorption spectrophotometry. Data were analyzed using one- and two-way repeated-measures ANOVA, Bonferroni, Friedman (α = 0.05), and Wilcoxon signed-ranks tests (α = 0.016). Average nickel level changed from 9.75 ± 5.02 to 10.37 ± 6.94 and then to 8.32 ± 4.36 μg/L in 1 year. Average chromium concentration changed from 3.86 ± 1.34 to 4.6 ± 6.11 and then to 2.04 ± 1.66 μg/L. Alterations in nickel values were not statistically significant [P = 0.468 (ANOVA)], but fluctuations in chromium levels were [P = 0.021 (Friedman)]. The decrease in chromium concentration after 12 months was significant compared to the control [P = 0.004 (Wilcoxon)]. Although slightly increased after 6 months, the concentration of both ions dropped to levels slightly lower than the control groups after 12 months.

Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran.

PubMed

Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

2016-05-25

This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs.

Quantitative dermatoglyphic asymmetry: a comparative study between schizophrenic patients and control groups of West Bengal, India.

PubMed

Karmakar, B; Sengupta, M

2012-01-01

Quantitative Fluctuating (FA) and Directional asymmetry (DA) of dermatoglyphics on digito-palmar complex were analyzed in a group of 111 patients (males: 61, females: 50) with schizophrenia (SZ), and compared to an ethnically matched phenotypically healthy control (males: 60, females: 60) through MANOVA, ANOVA and canonical Discriminant analyses. With few exceptions, asymmetries are higher among patients, and this is more prominent in FA than DA. Statistically significant differences were observed between patient and control groups, especially in males. In both sexes, FA of combined dermatoglyphic traits (e.g. total finger ridge count, total palmar pattern ridge count) are found to be a strong discriminator between the two groups with a correct classification of over 83% probability.

The assessment of lower face morphology changes in edentulous patients after prosthodontic rehabilitation, using two methods of measurement.

PubMed

Jivănescu, Anca; Bratu, Dana Cristina; Tomescu, Lucian; Măroiu, Alexandra Cristina; Popa, George; Bratu, Emanuel Adrian

2015-01-01

Using two measurement methods (a three-dimensional laser scanning system and a digital caliper), this study compares the lower face morphology of complete edentulous patients, before and after prosthodontic rehabilitation with bimaxillary complete dentures. Fourteen edentulous patients were randomly selected from the Department of Prosthodontics, at the Faculty of Dental Medicine, "Victor Babes" University of Medicine and Pharmacy, Timisoara, Romania. The changes that occurred in the lower third of the face after prosthodontic treatment were assessed quantitatively by measuring the vertical projection of the distances between two sets of anthropometric landmarks: Subnasale - cutaneous Pogonion (D1) and Labiale superius - Labiale inferius (D2). A two-way repeated measures ANOVA model design was carried out to test for significant interactions, main effects and differences between the two types of measuring devices and between the initial and final rehabilitation time points. The main effect of the type of measuring device showed no statistically significant differences in the measured distances (p=0.24 for D1 and p=0.39 for D2), between the initial and the final rehabilitation time points. Regarding the main effect of time, there were statistically significant differences in both the measured distances D1 and D2 (p=0.001), between the initial and the final rehabilitation time points. The two methods of measurement were equally reliable in the assessment of lower face morphology changes in edentulous patients after prosthodontic rehabilitation with bimaxillary complete dentures. The differences between the measurements taken before and after prosthodontic rehabilitation proved to be statistically significant.

The effect of paired pitch, rhythm, and speech on working memory as measured by sequential digit recall.

PubMed

Silverman, Michael J

2007-01-01

Educational and therapeutic objectives are often paired with music to facilitate the recall of information. The purpose of this study was to isolate and determine the effect of paired pitch, rhythm, and speech on undergraduate's memory as measured by sequential digit recall performance. Participants (N = 120) listened to 4 completely counterbalanced treatment conditions each consisting of 9 randomized monosyllabic digits paired with speech, pitch, rhythm, and the combination of pitch and rhythm. No statistically significant learning or order effects were found across the 4 trials. A 3-way repeated-measures ANOVA indicated a statistically significant difference in digit recall performance across treatment conditions, positions, groups, and treatment by position. No other comparisons resulted in statistically significant differences. Participants were able to recall digits from the rhythm condition most accurately while recalling digits from the speech and pitch only conditions the least accurately. Consistent with previous research, the music major participants scored significantly higher than non-music major participants and the main effect associated with serial position indicated that recall performance was best during primacy and recency positions. Analyses indicated an interaction between serial position and treatment condition, also a result consistent with previous research. The results of this study suggest that pairing information with rhythm can facilitate recall but pairing information with pitch or the combination of pitch and rhythm may not enhance recall more than speech when participants listen to an unfamiliar musical selection only once. Implications for practice in therapy and education are made as well as suggestions for future research.

Marginal fit of all-ceramic crowns fabricated using two extraoral CAD/CAM systems in comparison with the conventional technique.

PubMed

Alqahtani, Fawaz

2017-01-01

The purpose of this study was to determine the effect of two extraoral computer-aided design (CAD) and computer-aided manufacturing (CAM) systems, in comparison with conventional techniques, on the marginal fit of monolithic CAD/CAM lithium disilicate ceramic crowns. This is an in vitro interventional study. The study was carried out at the Department of Prosthodontics, School of Dentistry, Prince Sattam Bin Abdul-Aziz University, Saudi Arabia, from December 2015 to April 2016. A marginal gap of 60 lithium disilicate crowns was evaluated by scanning electron microscopy. In total, 20 pressable lithium disilicate (IPS e.max Press [Ivoclar Vivadent]) ceramic crowns were fabricated using the conventional lost-wax technique as a control group. The experimental all-ceramic crowns were produced based on a scan stone model and milled using two extraoral CAD/CAM systems: the Cerec group was fabricated using the Cerec CAD/CAM system, and the Trios group was fabricated using Trios CAD and milled using Wieland Zenotec CAM. One-way analysis of variance (ANOVA) and the Scheffe post hoc test were used for statistical comparison of the groups (α=0.05). The mean (±standard deviation) of the marginal gap of each group was as follows: the Control group was 91.15 (±15.35) µm, the Cerec group was 111.07 (±6.33) µm, and the Trios group was 60.17 (±11.09) µm. One-way ANOVA and the Scheffe post hoc test showed a statistically significant difference in the marginal gap between all groups. It can be concluded from the current study that all-ceramic crowns, fabricated using the CAD/CAM system, show a marginal accuracy that is acceptable in clinical environments. The Trios CAD group displayed the smallest marginal gap.

Translucency of zirconia-based pressable ceramics with different core and veneer thicknesses.

PubMed

Jeong, Il-Do; Bae, So-Yeon; Kim, Dong-Yeon; Kim, Ji-Hwan; Kim, Woong-Chul

2016-06-01

Little information is available on the translucency of zirconia-based pressable ceramic restorations with a pressed ceramic veneer and zirconia core in various thickness combinations. The purpose of this in vitro study was to assess the translucency of 3 types of zirconia-based pressable ceramics for different core-veneer thickness combinations. A bilayered ceramic specimen was prepared with a pressable ceramic (IPS e.max Zirpress, Initial IQ, Rosetta UltraPress) veneer over a zirconia core (Zenostar Zr). Three groups of specimens (n=7) were formed with the following core+veneer thicknesses: 1 +0.5 mm, 0.7 +0.8 mm, and 0.5 +1 mm. To obtain consistent thickness and high translucency, all specimens were subjected to surface grinding with a grinding machine. To eliminate the effect of differences in roughness on the translucency, the surface roughness of the ground specimens was measured with a scanning profiler, and the consistency of these measured values was verified through statistical analysis. The luminous transmittance of the specimens was measured with a spectrophotometer. The effects of the pressable ceramic type and core-veneer thickness combination on transmittance were assessed using a 2-way ANOVA (α=.05). The consistency of the surface roughness among the tested specimens was confirmed using a 1-way ANOVA and the Tukey HSD post hoc test (P<.05). The luminous transmittance exhibited a statistically significant dependence on both the type of pressable ceramic and the core-veneer thickness combination (P<.05). The type of pressable ceramic and core-veneer thickness combination affected the translucency of the restoration. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Effect of surface treatments on the bond strength between resin cement and differently sintered zirconium-oxide ceramics.

PubMed

Yenisey, Murat; Dede, Doğu Ömür; Rona, Nergiz

2016-01-01

This study investigated the effects of surface treatments on bond strength between resin cement and differently sintered zirconium-oxide ceramics. 220 zirconium-oxide ceramic (Ceramill ZI) specimens were prepared, sintered in two different period (Short=Ss, Long=Ls) and divided into ten treatment groups as: GC, no treatment; GSil, silanized (ESPE-Sil); GSilPen, silane flame treatment (Silano-Pen); GSb, sandblasted; GSbSil, sandblasted+silanized; GSbCoSil, sandblasted+silica coated (CoJet)+silanized; GSbRoSil, sandblasted+silica coated (Rocatech-Plus)+silanized; GSbDSil, sandblasted+diamond particle abraded (Micron MDA)+silanized; GSbSilPen, sandblasted+silane flame treatment+silanized; GSbLSil, sandblasted+Er:Yag (Asclepion-MCL30) laser treated+silanized. The composite resin (Filtek Z-250) cylinders were cemented to the treated ceramic surfaces with a resin cement (Panavia F2.0). Shear bond strength test was performed after specimens were stored in water for 24h and thermo-cycled for 6000 cycles (5-55 °C). Data were statistically analyzed with two-way analysis of variance (ANOVA) and Tamhane's multiple comparison test (α=0.05). According to the ANOVA, sintering time, surface treatments and their interaction were statistically significant (p<0.05). The highest bond strengths were obtained in GSbCoSil (Ss=13.36/Ls=11.19MPa) and lowest values were obtained in GC (Ss=4.70/Ls=4.62 MPa) for both sinter groups. Sintering time may be effective on the bond strength and 30 μm silica coating (Cojet) with silane coupling application technique increased the bond strength between resin cement and differently sintered zirconium-oxide ceramics. Copyright © 2015 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Characteristics and Psychiatric Symptoms of Internet Gaming Disorder among Adults Using Self-Reported DSM-5 Criteria.

PubMed

Kim, Na Ri; Hwang, Samuel Suk-Hyun; Choi, Jung-Seok; Kim, Dai-Jin; Demetrovics, Zsolt; Király, Orsolya; Nagygyörgy, Katalin; Griffiths, Mark D; Hyun, So Yeon; Youn, Hyun Chul; Choi, Sam-Wook

2016-01-01

The Section III of the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) proposed nine diagnostic criteria and five cut-point criteria for Internet Gaming Disorder (IGD). We aimed to examine the efficacy of such criteria. Adults (n=3041, men: 1824, women: 1217) who engaged in internet gaming within last 6 months completed a self-report online survey using the suggested wordings of the criteria in DSM-5. Major characteristics, gaming behavior, and psychiatric symptoms of IGD were analyzed using ANOVA, chi-square, and correlation analyses. The sociodemographic variables were not statistically significant between the healthy controls and the risk group. Among the participants, 419 (13.8%) were identified and labeled as the IGD risk group. The IGD risk group scored significantly higher on all motivation subscales (p<0.001). The IGD risk group showed significantly higher scores than healthy controls in all nine psychiatric symptom dimensions, i.e., somatization, obsession-compulsion, interpersonal sensitivity, depression, anxiety, hostility, phobic anxiety, paranoid ideation, and psychoticism (p<0.001). The IGD risk group showed differential psychopathological manifestations according to DSM-5 IGD diagnostic criteria. Further studies are needed to evaluate the reliability and validity of the specific criteria, especially for developing screening instruments.

The impact of length of stay on recovery measures in faith-based addiction treatment.

PubMed

Lashley, Mary

2018-03-30

To determine the impact of length of stay among homeless men in faith-based residential addictions recovery on physical activity, depression, self-esteem, and nicotine dependence. A time series design was utilized to measure changes in the four quality measures at program entry and at 3, 6, and 9 months following admission. The sample consisted of 175 homeless residents enrolled in a faith-based residential recovery program. Paired t tests were used to determine the change in average instrument response from admission to each follow-up period. Analysis of variance (ANOVA) and Tukey posthoc tests were used to assess for differences in length of stay between demographic variables. Statistically significant improvements were noted in self-esteem and depressive symptomatology at 3 and 6 months following admission and in physical activity levels at 3 months following admission. Nicotine dependence scores declined at 3 and 6 months but were not statistically significant. Time spent in this faith-based spiritual recovery program had a significant impact on depression, self-esteem, and physical activity. Recommendations for future study include conducting research to analyze the relationship between distinct program elements and quality indicators and comparing faith-based programs to other similar programs and to publicly funded secular recovery programs. © 2018 Wiley Periodicals, Inc.

A comparative evaluation of propolis and 5.0% potassium nitrate as a dentine desensitizer: A clinical study

PubMed Central

Purra, Aamir Rashid; Mushtaq, Mubashir; Acharya, Shashi Rashmi; Saraswati, Vidya

2014-01-01

Aim: The purpose of this clinical study was to evaluate the efficacy of saturated ethanolic solution of Propolis for the treatment of dentin hypersensitivity. Materials and Methods: Ten patients aged 20-40 years with 156 hypersensitive teeth were selected for a 3-month study. Each patient was subjected to treatment with saturated ethanolic solution of Propolis, 5% potassium nitrate and distilled water. The patients were recalled at seventh day, 2 weeks and 4 weeks for the application of the agent and re-evaluation. The final re-evaluation of the patients was done after 3 months from the first application. The responses of the patients to the test temperatures were converted to a ranking and data was statistically analyzed. A statistical analysis was done using ANOVA and Bonferroni test and Tukey HSD test for multicomparison. Results: The results between the Propolis group and the potassium nitrate group showed no significant difference in the immediate post-treatment period; however, the results were significant at the end of first week and second week. At 4 weeks and 3 months period, a comparison between the groups again showed no significant difference. Conclusion: It was concluded that Propolis was more effective than 5% potassium nitrate in relieving dentinal hypersensitivity and had an immediate and sustained effect. PMID:25210261

Apical extrusion of debris in primary molar root canals using mechanical and manual systems.

PubMed

Buldur, B; Hascizmeci, C; Aksoy, S; Nur Aydin, M; Guvendi, O N

2018-03-01

Apical extrusion of debris in primary root canal treatment has not been well elucidated. The purpose of this study is to compare the amount of apically extruded debris during the preparation of primary molar root canals using ProTaper, ProTaper Next, Self-adjusting File (SAF) and hand files. One hundred sixty extracted primary mandibular molar teeth were assigned to 2 groups: Group 1: Resorbed (n=80) and Group 2: Non-resorbed (n=80) and randomly to four subgroups (n=20 teeth for each subgroup) according to the instruments used, ProTaper, ProTaper Next, SAF, and hand file. The apically extruded debris was collected and dried in preweighed Eppendof tubes. The dry weight was calculated by subtracting the preoperative weight from the postoperative weight. Data were analysed statistically using the ANOVA and the Bonferroni post hoc t-test. The amount of apically extruded debris was significantly less for the non-resorbed group compared to the resorbed group (P<0.05). Regardless of the resorption groups, ProTaper Next and SAF extruded significantly less debris than did the ProTaper and hand files (P<0.05), while no statistically significant difference was found between ProTaper Next and SAF (P>0.05). All instruments caused apically extruded debris in primary teeth.

A Survey of Knowledge, Attitude and Practice of Iranian Dentists and Pedodontists in Relation to Child Abuse.

PubMed

Jahanimoghadam, Fatemeh; Kalantari, Mahsa; Horri, Azadeh; Ahmadipour, Habibeh; Pourmorteza, Ehsan

2017-12-01

Since almost half of the child abuse cases affect the head and neck region, dentists have an important role in the diagnosis and report of oral and dental aspects of child abuse cases. The objective of the current study was to evaluate the knowledge, attitude and practice of the general dentists and pedodontists regarding child abuse and child neglect. This cross-sectional study was carried out on the participants of the 12 th congress of pedodontists of Iran. A self-administered questionnaire was used for evaluating their knowledge, attitude and practice toward child abuse. T-test and ANOVA were applied to analyze the data by SPSS software. p <0.05 was considered statistically significant. The mean score of knowledge, attitude and practice of the participants regarding child abuse was 10.24±2.68, 41.54±11.24 and 2.78±1.05, respectively. The knowledge of pedodontists was significantly higher than knowledge of general dentists. No statistically significant difference was observed in attitude and practice ( p > 0.05). Dentists had a moderate knowledge, poor attitude and moderate practice regarding child abuse. Considering this fact, improvements in child abuse education for undergraduate students and continuing post-graduate training in this field are recommended.

Chronic Neck Pain and Cervico-Craniofacial Pain Patients Express Similar Levels of Neck Pain-Related Disability, Pain Catastrophizing, and Cervical Range of Motion

PubMed Central

Muñoz-García, Daniel; Gil-Martínez, Alfonso; López-López, Almudena; Lopez-de-Uralde-Villanueva, Ibai; La Touche, Roy; Fernández-Carnero, Josué

2016-01-01

Background. Neck pain (NP) is strongly associated with cervico-craniofacial pain (CCFP). The primary aim of the present study was to compare the neck pain-related disability, pain catastrophizing, and cervical and mandibular ROM between patients with chronic mechanical NP and patients with CCFP, as well as asymptomatic subjects. Methods. A total of 64 participants formed three groups. All participants underwent a clinical examination evaluating the cervical range of motion and maximum mouth opening, neck disability index (NDI), and psychological factor of Pain Catastrophizing Scale (PCS). Results. There were no statistically significant differences between patients with NP and CCFP for NDI and PCS (P > 0.05). One- way ANOVA revealed significant differences for all ROM measurements. The post hoc analysis showed no statistically significant differences in cervical extension and rotation between the two patient groups (P > 0.05). The Pearson correlation analysis shows a moderate positive association between NDI and the PCS for the group of patients with NP and CCFP. Conclusion. The CCFP and NP patient groups have similar neck disability levels and limitation in cervical ROM in extension and rotation. Both groups had positively correlated the NDI with the PCS. PMID:27119020

Characteristics and Psychiatric Symptoms of Internet Gaming Disorder among Adults Using Self-Reported DSM-5 Criteria

PubMed Central

Kim, Na Ri; Hwang, Samuel Suk-Hyun; Choi, Jung-Seok; Kim, Dai-Jin; Demetrovics, Zsolt; Király, Orsolya; Nagygyörgy, Katalin; Griffiths, Mark. D.; Hyun, So Yeon; Youn, Hyun Chul

2016-01-01

Objective The Section III of the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) proposed nine diagnostic criteria and five cut-point criteria for Internet Gaming Disorder (IGD). We aimed to examine the efficacy of such criteria. Methods Adults (n=3041, men: 1824, women: 1217) who engaged in internet gaming within last 6 months completed a self-report online survey using the suggested wordings of the criteria in DSM-5. Major characteristics, gaming behavior, and psychiatric symptoms of IGD were analyzed using ANOVA, chi-square, and correlation analyses. Results The sociodemographic variables were not statistically significant between the healthy controls and the risk group. Among the participants, 419 (13.8%) were identified and labeled as the IGD risk group. The IGD risk group scored significantly higher on all motivation subscales (p<0.001). The IGD risk group showed significantly higher scores than healthy controls in all nine psychiatric symptom dimensions, i.e., somatization, obsession-compulsion, interpersonal sensitivity, depression, anxiety, hostility, phobic anxiety, paranoid ideation, and psychoticism (p<0.001). Conclusion The IGD risk group showed differential psychopathological manifestations according to DSM-5 IGD diagnostic criteria. Further studies are needed to evaluate the reliability and validity of the specific criteria, especially for developing screening instruments. PMID:26766947

Eating Attitudes and Related Factors in Turkish Nursing Students

PubMed Central

Celik, Sevim; Ugur, Bayram Ali; Aykurt, Fethi Ahmet; Bektas, Muammer

2015-01-01

Background: Changing eating behaviors might trigger obesity, deficiency, anorexia nervosa, bulimia nervosa, and reactive eating disorders. Objectives: This study aimed to determine eating attitudes of nursing students in the western Black-Sea region of Turkey as well as to examine the effects of demographic features, self-esteem, body image, income level, and family structure on their eating attitudes. Materials and Methods: This cross-sectional study was conducted on 310 nursing students between January and February 2014. Data were collected using the personal information form, Eating Attitudes Test (EAT), Rosenberg Self-Esteem Scale (RSES), Beck Depression Scale (BDS), Body-Cathexis Scale (BCS), and Body Mass Index (BMI). Data were evaluated by descriptive statistics, independent samples t-test, one-way ANOVA, Kruskal-Wallis test, and Pearson correlation analysis. Results: About 30.0% of Turkish nursing students had negative eating attitudes. There was a significant positive correlation between the BDS and EAT scores (P < 0.001). There was a significant negative correlation between RSES scores and EAT scores of nursing students (P < 0.001). A statistically significant difference was found between the father’s occupation (P < 0.05) and mother’s working condition (P < 0.05), and the students’ eating attitudes. Conclusions: Psychological status, self-esteem, economic level, and place of residence of nursing students may be the potential factors for eating disorders. PMID:26339662

Optimization of non-thermal plasma efficiency in the simultaneous elimination of benzene, toluene, ethyl-benzene, and xylene from polluted airstreams using response surface methodology.

PubMed

Najafpoor, Ali Asghar; Jonidi Jafari, Ahmad; Hosseinzadeh, Ahmad; Khani Jazani, Reza; Bargozin, Hasan

2018-01-01

Treatment with a non-thermal plasma (NTP) is a new and effective technology applied recently for conversion of gases for air pollution control. This research was initiated to optimize the efficient application of the NTP process in benzene, toluene, ethyl-benzene, and xylene (BTEX) removal. The effects of four variables including temperature, initial BTEX concentration, voltage, and flow rate on the BTEX elimination efficiency were investigated using response surface methodology (RSM). The constructed model was evaluated by analysis of variance (ANOVA). The model goodness-of-fit and statistical significance was assessed using determination coefficients (R 2 and R 2 adj ) and the F-test. The results revealed that the R 2 proportion was greater than 0.96 for BTEX removal efficiency. The statistical analysis demonstrated that the BTEX removal efficiency was significantly correlated with the temperature, BTEX concentration, voltage, and flow rate. Voltage was the most influential variable affecting the dependent variable as it exerted a significant effect (p < 0.0001) on the response variable. According to the achieved results, NTP can be applied as a progressive, cost-effective, and practical process for treatment of airstreams polluted with BTEX in conditions of low residence time and high concentrations of pollutants.

[Risk factors for infection in total knee artrhoplasty, including previously unreported intraoperative fracture and deep venous thrombosis].

PubMed

de Dios, M; Cordero-Ampuero, J

2015-01-01

To carry out a statistical analysis on the significant risk factors for deep late infection (prosthetic joint infection, PJI) in patients with a knee arthroplasty (TKA). A retrospective observational case-control study was conducted on a case series of 32 consecutive knee infections, using an analysis of all the risk factors reported in the literature. A control series of 100 randomly selected patients operated in the same Department of a University General Hospital during the same period of time, with no sign of deep infection in their knee arthroplasty during follow-up. Statistical comparisons were made using Pearson for qualitative and ANOVA for quantitative variables. The significant (p>0.05) factors found in the series were: Preoperative previous knee surgery, glucocorticoids, immunosuppressants, inflammatory arthritis. prolonged surgical time, inadequate antibiotic prophylaxis, intraoperative fractures. Postoperative secretion of the wound longer than 10 days, deep palpable haematoma, need for a new surgery, and deep venous thrombosis in lower limbs. Distant infections cutaneous, generalized sepsis, urinary tract, pneumonia, abdominal. This is the first report of intraoperative fractures and deep venous thrombosis as significantly more frequent factors in infected TKAs. Other previously described risk factors for TKA PJI are also confirmed. Copyright © 2014 SECOT. Published by Elsevier Espana. All rights reserved.

Comparative evaluation of the effect of denture cleansers on the surface topography of denture base materials: An in-vitro study.

PubMed

Jeyapalan, Karthigeyan; Kumar, Jaya Krishna; Azhagarasan, N S

2015-08-01

The aim was to evaluate and compare the effects of three chemically different commercially available denture cleansing agents on the surface topography of two different denture base materials. Three chemically different denture cleansers (sodium perborate, 1% sodium hypochlorite, 0.2% chlorhexidine gluconate) were used on two denture base materials (acrylic resin and chrome cobalt alloy) and the changes were evaluated at 3 times intervals (56 h, 120 h, 240 h). Changes from baseline for surface roughness were recorded using a surface profilometer and standard error of the mean (SEM) both quantitatively and qualitatively, respectively. Qualitative surface analyses for all groups were done by SEM. The values obtained were analyzed statistically using one-way ANOVA and paired t-test. All three denture cleanser solutions showed no statistically significant surface changes on the acrylic resin portions at 56 h, 120 h, and 240 h of immersion. However, on the alloy portion changes were significant at the end of 120 h and 240 h. Of the three denture cleansers used in the study, none produced significant changes on the two denture base materials for the short duration of immersion, whereas changes were seen as the immersion periods were increased.

The role of service-learning in college students' environmental literacy: Content knowledge, attitudes, and behaviors

NASA Astrophysics Data System (ADS)

Singletary, Joanna Lynn Bush

This study evaluated the relationship of environmental service-learning on environmental literacy in undergraduates. The subjects were 36 undergraduates at a small liberal arts university enrolled in an environmental biology course. To determine the role of environmental service-learning on college students' environmental knowledge, attitudes, behaviors, and environmental literacy, this study utilized concurrent mixed methods approach for qualitative and quantitative analysis. A quasi-experimental repeated measures approach was the design of the quantitative component of the study. Data were collected on attitude, behavior, and content knowledge aspects of environmental literacy as measured by the Environmental Literacy Survey (Kibert, 2000). Hypotheses were tested by independent samples ttests and repeated measures ANOVA. Repeated measures ANOVA conducted on participants' three subscales scores for the Environmental Literacy Survey (attitude, behavior, and knowledge) indicated that students who participated in environmental service-learning scored statistically significantly higher than those that did not initially participate in service-learning. Qualitative data collected in the form of journal reflections and portfolios were evaluated for themes of environmental attitudes or affective statements, environmentally positive behaviors and skills, and ecological content. Quantitative and qualitative data support the positive role of environmental service-learning in the development of environmental literacy in undergraduate students.

Identifying latent profiles of posttraumatic stress and major depression symptoms in Canadian veterans: Exploring differences across profiles in health related functioning.

PubMed

Armour, Cherie; Contractor, Ateka; Elhai, Jon D; Stringer, Maurice; Lyle, Gary; Forbes, David; Richardson, J Don

2015-07-30

Posttraumatic stress disorder (PTSD) has been consistently reported as being highly comorbid with major depressive disorder (MDD) and as being associated with health related functional impairment (HRF). We used archival data from 283 previously war-zone deployed Canadian veterans. Latent profile analysis (LPA) was used to uncover patterns of PTSD and MDD comorbidity as measured via the PTSD Checklist-Military version (PCL-M) and the Patient Health Questionnaire-9 (PHQ-9). Individual membership of latent classes was used in a series of one-way ANOVAs to ascertain group differences related to HRF as measured via the Short-Form-36 Health Survey (SF-36). LPA resulted in three discrete patterns of PTSD and MDD comorbidity which were characterized by high symptoms of PTSD and MDD, moderate symptoms, and low symptoms. All ANOVAs comparing class membership on the SF-36 subscales were statistically significant demonstrating group differences across levels of HRF. The group with the highest symptoms reported the worst HRF followed by the medium and low symptom groups. These findings are clinically relevant as they demonstrate the need for continual assessment and targeted treatment of co-occurring PTSD and MDD. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Morphometric assessment of the red stripe weevils, Rhynchophorus vulneratus (Coleoptera: Curculionidae) from several localities in Malaysia

NASA Astrophysics Data System (ADS)

Sazali, Siti Nurlydia; Hazmi, Izfa Riza; Rahim, Faszly; Abang, Fatimah; Jemain, Abdul Aziz

2018-04-01

The recognition of intraspecific variation could enhance knowledge and understanding on the population divergence that might be resulted from different geographical areas. To study the possible effect derived from different locations, a morphometric study of the red stripe weevils, Rhynchophorus vulneratus from different localities in Malaysia was conducted using field and voucher specimens. A total of twenty-three morphological characters were examined from 108 individuals of R. vulneratus representing population of Kota Samarahan, Mukah and central of Peninsular Malaysia. The data were subjected to univariate one-way single factor analysis of variance (ANOVA) and analysed in factor analysis using SPSS version 22.0 software. Univariate ANOVA showed that all tested variables were significantly different (p<0.05) except for mesocoxal distance (MSD), meanwhile from the factor analysis, the first three factors with eigenvalues greater than 1.0 were successfully extracted, resulting in a high variation of 82.687%. For factor 1, 39.213% of total variation was recorded, factor 2 accounted for 34.096% and factor 3 contributing to 9.377%, respectively. The mixed plotting among the twenty-three morphological characters suggests a strong correlation among the parameters examined and further statistical analysis should be conducted to include environmental factors such as habitat types, food availability and predation effect.

Effect of silver nano particles on flexural strength of acrylic resins.

PubMed

Sodagar, Ahmad; Kassaee, Mohammad Zaman; Akhavan, Azam; Javadi, Negar; Arab, Sepideh; Kharazifard, Mohammad Javad

2012-04-01

Poly(methyl methacrylate), PMMA, is widely used for fabrication of removable orthodontic appliances. Silver nano particles (AgNps) have been added to PMMA because of their antimicrobial properties. The aim of this study is to investigate the effect of AgNps on the flexural strength of PMMA. Acrylic liquid containing 0.05% and 0.2% AgNps was prepared for two kinds of acrylic resins: Rapid Repair &Selecta Plus. Two groups without AgNps were used as control groups. For each one, flexural strength was investigated via Three Point Bending method for the 15 acrylic blocks. Two-way ANOVA, one way ANOVA and Tukey tests were used for statistical analysis. Rapid Repair without AgNps showed the highest flexural strength. Addition of 0.05% AgNps to Rapid Repair, significantly decreased its flexural strength while, continuing the addition up to 0.2% increased it nearly up to its primary level. In contrast, addition of AgNps to Selecta Plus increased its flexural strength but addition of 0.05% nano particles was more effective than 0.2%. The effect of AgNps on flexural strength of PMMA depends on several factors including the type of acrylics and the concentrations of nano particles. Copyright © 2011 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Friction Forces during Sliding of Various Brackets for Malaligned Teeth: An In Vitro Study

PubMed Central

Crincoli, Vito; Di Bisceglie, Maria Beatrice; Balsamo, Antonio; Serpico, Vitaliano; Chiatante, Francesco; Pappalettere, Carmine; Boccaccio, Antonio

2013-01-01

Aims. To measure the friction force generated during sliding mechanics with conventional, self-ligating (Damon 3 mx, Smart Clip, and Time 3) and low-friction (Synergy) brackets using different archwire diameters and ligating systems in the presence of apical and buccal malalignments of the canine. Methods. An experimental setup reproducing the right buccal segment of the maxillary arch was designed to measure the friction force generated at the bracket/wire and wire/ligature interfaces of different brackets. A complete factorial plan was drawn up and a three-way analysis of variance (ANOVA) was carried out to investigate whether the following factors affect the values of friction force: (i) degree of malalignment, (ii) diameter of the orthodontic wire, and (iii) bracket/ligature combination. Tukey post hoc test was also conducted to evaluate any statistically significant differences between the bracket/ligature combinations analyzed. Results. ANOVA showed that all the above factors affect the friction force values. The friction force released during sliding mechanics with conventional brackets is about 5-6times higher than that released with the other investigated brackets. A quasilinear increase of the frictional forces was observed for increasing amounts of apical and buccal malalignments. Conclusion. The Synergy bracket with silicone ligature placed around the inner tie-wings appears to yield the best performance. PMID:23533364

The influence of topical application of grapeseed extract gel on enamel surface hardness after demineralization

NASA Astrophysics Data System (ADS)

Saragih, D. A.; Herda, E.; Triaminingsih, S.

2017-08-01

The aim of this study was to analyze the influence of topical application of 6.5% and 12.5% grapeseed extract gels for duration of application 16 and 32 minutes on the enamel surface hardness following tooth demineralization by an energy drink. The samples were 21 bovine teeth that underwent demineralization by immersion in the energy drink for 5 minutes in an incubator at 37°C. The demineralized specimens were randomly divided into a control group and 2 treatment groups. The control group was immersed in artificial saliva for 6 hours at 37°C, whereas the treatment groups were treated with topical 6.5% and 12.5% grapeseed extract gels for durations of 16 and 32 minutes and then immersed in artificial saliva for 6 hours at 37°C. The hardness was measured with a Knoop hardness tester. Statistical analysis by repeated ANOVA and one-way ANOVA revealed a significant increase in the enamel hardness value (p<0.05) after the application of the topical grapeseed extract gels at both concentrations. Application of 12.5% topical grapeseed extract gel for 32 minutes resulted in a restored hardness that insignificant diffrence from the initial hardness value obtained before demineralization (p>0.05).

Land Use Land Cover Changes in Detection of Water Quality: A Study Based on Remote Sensing and Multivariate Statistics.

PubMed

Hua, Ang Kean

2017-01-01

Malacca River water quality is affected due to rapid urbanization development. The present study applied LULC changes towards water quality detection in Malacca River. The method uses LULC, PCA, CCA, HCA, NHCA, and ANOVA. PCA confirmed DS, EC, salinity, turbidity, TSS, DO, BOD, COD, As, Hg, Zn, Fe, E. coli , and total coliform. CCA confirmed 14 variables into two variates; first variate involves residential and industrial activities; and second variate involves agriculture, sewage treatment plant, and animal husbandry. HCA and NHCA emphasize that cluster 1 occurs in urban area with Hg, Fe, total coliform, and DO pollution; cluster 3 occurs in suburban area with salinity, EC, and DS; and cluster 2 occurs in rural area with salinity and EC. ANOVA between LULC and water quality data indicates that built-up area significantly polluted the water quality through E. coli , total coliform, EC, BOD, COD, TSS, Hg, Zn, and Fe, while agriculture activities cause EC, TSS, salinity, E. coli , total coliform, arsenic, and iron pollution; and open space causes contamination of turbidity, salinity, EC, and TSS. Research finding provided useful information in identifying pollution sources and understanding LULC with river water quality as references to policy maker for proper management of Land Use area.

Analysis and classification of optical tomographic images of rheumatoid fingers with ANOVA and discriminate analysis

NASA Astrophysics Data System (ADS)

Montejo, Ludguier D.; Kim, Hyun K.; Häme, Yrjö; Jia, Jingfei; Montejo, Julio D.; Netz, Uwe J.; Blaschke, Sabine; Zwaka, Paul; Müeller, Gerhard A.; Beuthan, Jürgen; Hielscher, Andreas H.

2011-03-01

We present a study on the effectiveness of computer-aided diagnosis (CAD) of rheumatoid arthritis (RA) from frequency-domain diffuse optical tomographic (FDOT) images. FDOT is used to obtain the distribution of tissue optical properties. Subsequently, the non-parametric Kruskal-Wallis ANOVA test is employed to verify statistically significant differences between the optical parameters of patients affected by RA and healthy volunteers. Furthermore, quadratic discriminate analysis (QDA) of the absorption (μa) and scattering (μa or μ's) distributions is used to classify subjects as affected or not affected by RA. We evaluate the classification efficiency by determining the sensitivity (Se), specificity (Sp), and the Youden index (Y). We find that combining features extracted from μa and μa or μ's images allows for more accurate classification than when μa or μa or μ's features are considered individually on their own. Combining μa and μa or μ's features yields values of up to Y = 0.75 (Se = 0.84 and Sp = 0.91). The best results when μa or μ's features are considered individually are Y = 0.65 (Se = 0.85 and Sp = 0.80) and Y = 0.70 (Se = 0.80 and Sp = 0.90), respectively.

Effect of laser welding on the titanium composite tensile bond strength.

PubMed

Galo, Rodrigo; Ribeiro, Ricardo Faria; Rodrigues, Renata Cristina Silveira; Pagnano, Valéria de Oliveira; de Mattos, Maria da Glória Chiarello

2009-01-01

The aim of this study was to analyze the shear bond strength between commercially pure titanium, with and without laser welding, after airbone-particle abrasion (Al(2)O(3)) and 2 indirect composites. Sixty-four specimens were cast and divided into 2 groups with and without laser welding. Each group was divided in 4 subgroups, related to Al(2)O(3) grain size: A - 250 microm; B - 180 microm; C- 110 microm; and D - 50 microm. Composite rings were formed around the rods and light polymerized using UniXS unit. Specimens were invested and their shear bond strength at failure was measured with a universal testing machine at a crosshead speed of 2.0 mm/min. Statistical analysis was carried out with ANOVA and Tukey's test (alpha=0.05). The highest bond strength means were recorded in 250 microm group without laser welding. The lowest shear bond strength means were recorded in 50 microm group with laser welding. Statistically significant differences (p<0.05) were found between all groups. In conclusion, airborne particle abrasion yielded significantly lower bond strength as the Al(2)O(3) particle size decreased. Shear bond strength decreased in the laser welded specimens.

Comparison of quality of obturation and instrumentation time using hand files and two rotary file systems in primary molars: A single-blinded randomized controlled trial.

PubMed

Govindaraju, Lavanya; Jeevanandan, Ganesh; Subramanian, E M G

2017-01-01

In permanent dentition, different rotary systems are used for canal cleaning and shaping. Rotary instrumentation in pediatric dentistry is an emerging concept. A very few studies have compared the efficiency of rotary instrumentation for canal preparation in primary teeth. Hence, this study was performed to compare the obturation quality and instrumentation time of two rotary files systems - Protaper, Mtwo with hand files in primary molars. Forty-five primary mandibular molars were randomly allotted to one of the three groups. Instrumentation was done using K-files in Group 1; Protaper in Group 2; and Mtwo in Group 3. Instrumentation time was recorded. The canal filling quality was assessed as underfill, optimal fill, and overfill. Statistical analysis was done using Chi-square, ANOVA, and post hoc Tukey test. No significant difference was observed in the quality of obturation among three groups. Intergroup comparison of the instrumentation time showed a statistically significant difference between the three groups. The use of rotary instrumentation in primary teeth results in marked reduction in the instrumentation time and improves the quality of obturation.

Effectiveness of Conceptual Change Text-oriented Instruction on Students' Understanding of Energy in Chemical Reactions

NASA Astrophysics Data System (ADS)

Taştan, Özgecan; Yalçınkaya, Eylem; Boz, Yezdan

2008-10-01

The aim of this study is to compare the effectiveness of conceptual change text instruction (CCT) in the context of energy in chemical reactions. The subjects of the study were 60, 10th grade students at a high school, who were in two different classes and taught by the same teacher. One of the classes was randomly selected as the experimental group in which CCT instruction was applied, and the other as the control group in which traditional teaching method was used. The data were obtained through the use of Energy Concept Test (ECT), the Attitude Scale towards Chemistry (ASC) and Science Process Skill Test (SPST). In order to find out the effect of the conceptual change text on students' learning of energy concept, independent sample t-tests, ANCOVA (analysis of covariance) and ANOVA (analysis of variance) were used. Results revealed that there was a statistically significant mean difference between the experimental and control group in terms of students' ECT total mean scores; however, there was no statistically significant difference between the experimental and control group in terms of students' attitude towards chemistry. These findings suggest that conceptual change text instruction enhances the understanding and achievement.

Measuring medical students' motivation to learning anatomy by cadaveric dissection.

PubMed

Abdel Meguid, Eiman M; Khalil, Mohammed K

2017-07-01

Motivation and learning are inter-related. It is well known that motivating learners is clearly a complex endeavor, which can be influenced by the educational program and the learning environment. Limited research has been conducted to examine students' motivation as a method to assess the effectiveness of dissection in medical education. This study aimed to assess and analyze students' motivation following their dissection experience. A 29-item survey was developed based on the Attention, Relevance, Confidence, and Satisfaction model of motivation. Descriptive statistics were undertaken to describe students' motivation to the dissection experience. T-test and ANOVA were used to compare differences in motivational scores between gender and educational characteristics of students. Dissection activities appear to promote students' motivation. Gender difference was statistically significant as males were more motivated by the dissection experience than females. Comparison between students with different knowledge of anatomy was also significantly different. The study is an important step in the motivational design to improve students' motivation to learn. The outcome of this study provides guidance to the selection of specific strategies to increase motivation by generating motivational strategies/tactics to facilitate learning. Anat Sci Educ 10: 363-371. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

Consumer knowledge and attitudes toward nutritional labels.

PubMed

Cannoosamy, Komeela; Pugo-Gunsam, Prity; Jeewon, Rajesh

2014-01-01

To determine Mauritian consumers' attitudes toward nutritional labels based on the Kano model and to identify determinants of the use and understanding of nutrition labels. The researchers also used a Kano model questionnaire to determine consumers' attitudes toward nutrition labeling. Four hundred consumers residing in Mauritius. Information was elicited via a questionnaire that assessed nutritional knowledge and information about the use and understanding of nutritional labels and demographic factors. Nutritional label use and understanding, nutrition knowledge, and association of demographic factors with label use. Statistical tests performed included 1-way ANOVA and independent samples t tests. Statistically significant relationships (P < .05) were found for nutritional knowledge and nutritional label usage with demographic factors. All demographic factors with the exception of gender were significantly associated (P < .05) with nutritional label understanding. Based on the outcome of the Kano survey, calorie content, trans fat content, protein content, and cholesterol content were found to be must-be attributes: that is, attributes that, when not present, result in consumer dissatisfaction. Age, education, income, household size, and nutrition knowledge had an impact on nutritional label use. Health promoters should aim to increase the use of nutritional labels. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Counting with Colours? Effect of Colours on the Numerical Abilities of House Crows (Corvus splendens) and Common Myna (Acridotheres tristis)

PubMed Central

Rahman, Nor Amira Abdul; Ali, Zalila; Zuharah, Wan Fatma; Fadzly, Nik

2016-01-01

We conducted several aviary experiments to investigate the influence of colours in quantity judgments of two species of birds; house crow (Corvus splendens) and common myna (Acridotheres tristis). Different quantity (in seven different food proportions) of mealworms were presented nonsequentially to all birds using artificially coloured red mealworms, for experiment 1, and using artificially coloured green mealworms, for experiment 2. Both red and green coloured mealworms have no significant effect on house crow’s quantity judgments (red: ANOVA: F6,30 = 1.748, p = 0.144; and green: ANOVA: F6,30= 1.085, p = 0.394). Common myna, however, showed a strong influence of red colour in their quantity judgment (ANOVA: F6,30 = 2.922, p = 0.023) as they succeeded in choosing the largest amount of food between two cups, but not when offered food using green coloured mealworms (ANOVA: F6,30 = 1.183, p = 0.342). In the next experiment, we hypothesised that both house crow and common myna will prefer red coloured food items over green coloured food items, when factors such as the amount of food is equal. We chose to test red and green colours because both colours play an important role in most avian food selections. Results showed that there were no significant differences in the selection of red or green coloured mealworms for both house crows (ANOVA: F6,30 = 2.310, p = 0.06) and common myna (ANOVA: F6,30 = 0.823, p = 0.561). PMID:27688847

A comparative evaluation of cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper): a SEM study.

PubMed

Reddy, K Balakoti; Dash, Shreemoy; Kallepalli, Sowmya; Vallikanthan, Sangeetha; Chakrapani, N; Kalepu, Vamsi

2013-11-01

The present study was conducted to compare the cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper). Sixty single rooted human maxillary anterior teeth decoronated at the cementoenamel junction were used. All the specimens were divided into four groups of 15 teeth each, group I--ProTaper rotary instrumentation done, group II--K3 rotary instrumentation done, group III--Stainless steel K-file instrumentation done, group IV--root canal irrigation without instrumentation. Root canal preparation was done in a crown down manner and 3% sodium hypochlorite was used as irrigant after each file followed by final rinse with 5 ml of 17% EDTA solution, then specimens were scanning electron microscopic (SEM) examination. Statistical analysis was done using one-way ANOVA followed by post hoc Tukey's HSD test. Group I showed highly statistical significant difference compared to other groups. There was no statistically significant difference considering smear layer at any levels among the groups with no smear layer formation in group IV. ProTaper rotary instrumentation showed the maximum cleaning efficacy followed by K3 rotary instrumentation in the coronal, middle and apical thirds of the root canal. ProTaper rotary instruments are more efficient than hand and K3 rotary instruments during root canal treatment.

Relationship between time management skills and anxiety and academic motivation of nursing students in Tehran.

PubMed

Ghiasvand, Arezoo Mohamadkhani; Naderi, Manijeh; Tafreshi, Mansoureh Zagheri; Ahmadi, Farzane; Hosseini, Meimanat

2017-01-01

Time management skills are essential for nursing students' success, and development of clinical competence. The purpose of this study was to determine the relationship between time management skills and anxiety and academic motivation of nursing students in Tehran medical sciences universities in 2015. This cross-sectional study was carried out on 441 nursing students in three medical universities in Tehran. Random stratified sampling was done to select the samples. Data were collected using demographic Questionnaire, Time Management Questionnaire (TMQ), Spielberger State-Trait Anxiety Inventory (STAI) and Academic Motivation Scale (AMS), which was completed t by self-report. Data were analyzed using SPSS 18 software with descriptive and analytical statistics such as ANOVA, independent t-test, Regression and Pearson Correlation Coefficient. Most participants had a moderate level of time Management skills (49%), State Anxiety (58%), Trait Anxiety (60%) and Academic Motivation (58%). The results also showed a statistically significant negative correlation between the students' TMQ scores and the state anxiety (r= -0.282, p< 0.001) and trait anxiety scores (r= -0.325, p<0.001). Moreover, there was a statistically significant positive correlation between the students' TMQ scores and AMS scores (r= 0.279, p< 0.001). Regarding the findings, it seems that it is necessary to plan for improving time management skills in order to enhance academic motivation and reduce anxiety rates among nursing students.

Assessment of Adolescent Perceptions on Parental Attitudes on Different Variables

ERIC Educational Resources Information Center

Ersoy, Evren

2015-01-01

The purpose of this study is to examine secondary school student perceptions of parental attitudes with regards to specific variables. Independent samples t test for parametric distributions and one-way variance analysis (ANOVA) was used for analyzing the data, when the ANOVA analyses were significant Scheffe test was conducted on homogeneous…

DAnTE: a statistical tool for quantitative analysis of –omics data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polpitiya, Ashoka D.; Qian, Weijun; Jaitly, Navdeep

2008-05-03

DAnTE (Data Analysis Tool Extension) is a statistical tool designed to address challenges unique to quantitative bottom-up, shotgun proteomics data. This tool has also been demonstrated for microarray data and can easily be extended to other high-throughput data types. DAnTE features selected normalization methods, missing value imputation algorithms, peptide to protein rollup methods, an extensive array of plotting functions, and a comprehensive ANOVA scheme that can handle unbalanced data and random effects. The Graphical User Interface (GUI) is designed to be very intuitive and user friendly.

The Connection between Success in a Freshman Chemistry Class and a Student's Jungian Personality Type

NASA Astrophysics Data System (ADS)

Clark, Gale J.; Riley, Wayne D.

2001-10-01

This paper explores the connection between a student's performance in a freshman chemistry class and his or her personality type. Performance was gauged by the final percentage grade earned in class and personality type was based on Carl G. Jung's personality typology as assessed by the Myers-Briggs Type Indicator (MBTI). Performance and personality type were correlated using ANOVA statistics. The results show that only one of the 16 personality types had a class average that was significantly higher than 14 of the other 15 types. The lowest-scoring type was also significantly lower than 3 other personality types. This research shows that characteristics of personality types may be a basis for assisting or deterring success in a general chemistry class. Data on the personality types of 23 chemistry professors suggest that a success bias may be amplified by similar personality traits in the instructors.

Psychosocial job strain and sleep quality interaction leading to insufficient recovery.

PubMed

Rydstedt, Leif W; Devereux, Jason J

2013-11-05

The purpose of the study was to assess the impact of job strain and sleep quality on the diurnal pattern of cortisol reactivity, measured by awakening and evening (10 PM) saliva cortisol. The sample consisted of 76 British white-collar workers (24 women, 52 men; mean age 45.8 years). Sleep quality and job strain were assessed in a survey distributed just before the cortisol sampling. Both input variables were dichotomized about the median and factorial ANOVA was used for the statistical analysis. Low sleep quality was significantly associated with lower morning cortisol secretion. While job strain had no main effects on the cortisol reactivity there was a significant interaction effect between the input variables on morning cortisol secretion. These findings tentatively support the hypothesis that lack of sleep for workers with high job strain may result in a flattened diurnal cortisol reactivity.

Comparative study of the effect of ultrasound on the removal of intracanal posts.

PubMed

Braga, Neilor Mateus Antunes; Resende, Leandro Marques; Vasconcellos, Walisom Arthuso; Paulino, Silvana Maria; Sousa-Neto, Manoel Damiao

2009-01-01

This study sought to evaluate how ultrasound affected the removal of stainless steel and titanium posts that had been attached with two different resin cements. The crowns of 32 maxillary canines were removed, the roots were embedded in acrylic resin blocks, and the canals were treated endodontically. The specimens were randomly distributed into two groups (n = 16) according to the brand of cement and subdivided (n = 8) according to the type of post. The specimens were submitted to ultrasonic vibration applied perpendicularly to the long axis of the tooth for 60 seconds. Data were submitted to ANOVA and showed no significant statistical difference among the groups (p > 0.05). It may be concluded that the effects of ultrasonic vibration used to remove intraradicular posts were not significantly different when applied to stainless steel or titanium posts cemented with chemically or dual-activated resin cements.

Psychosocial Job Strain and Sleep Quality Interaction Leading to Insufficient Recovery

PubMed Central

Rydstedt, Leif W.; Devereux, Jason J.

2013-01-01

The purpose of the study was to assess the impact of job strain and sleep quality on the diurnal pattern of cortisol reactivity, measured by awakening and evening (10 PM) saliva cortisol. The sample consisted of 76 British white-collar workers (24 women, 52 men; mean age 45.8 years). Sleep quality and job strain were assessed in a survey distributed just before the cortisol sampling. Both input variables were dichotomized about the median and factorial ANOVA was used for the statistical analysis. Low sleep quality was significantly associated with lower morning cortisol secretion. While job strain had no main effects on the cortisol reactivity there was a significant interaction effect between the input variables on morning cortisol secretion. These findings tentatively support the hypothesis that lack of sleep for workers with high job strain may result in a flattened diurnal cortisol reactivity. PMID:24196305

Comparative assessment of efficacy of two different pretreatment single oral doses of betamethasone on inter-appointment and postoperative discomfort: An in vivo clinical evaluation.

PubMed

Gyanani, Hitesh; Chhabra, Naveen; Parmar, Ghanshyam R

2016-01-01

Study aimed to evaluate the efficacy of two different pretreatment single oral doses of betamethasone on the incidence of inter-appointment flare up and postoperative discomfort. Fifty-four patients aged 18-59 years requiring endodontic treatment were selected and randomly assigned to three groups; single pretreatment oral dose of placebo or betamethasone in two different oral doses of 0.5 mg and 1 mg, respectively. Endodontic therapy was completed in two visits using triple antibiotic paste as intracanal medicament. Patients were given a questionnaire to record their pain at 1, 2, 3, and 7 days after treatment. In the second visit, obturation was done, and the patients were again instructed to record their pain scores after treatment and discharged. The verbal rating scale was used for recording the pain scores. Statistical analysis was done using ANOVA and the Friedman test. 0.5 mg betamethasone group showed least mean pain scores among all experimental groups; however, there was no statistically significant difference between any of the groups ( P > 0.05). Pretreatment single oral dose of betamethasone is an effective in managing endodontic flare-ups; however, the results were statistically insignificant.

Gap Shape Classification using Landscape Indices and Multivariate Statistics

PubMed Central

Wu, Chih-Da; Cheng, Chi-Chuan; Chang, Che-Chang; Lin, Chinsu; Chang, Kun-Cheng; Chuang, Yung-Chung

2016-01-01

This study proposed a novel methodology to classify the shape of gaps using landscape indices and multivariate statistics. Patch-level indices were used to collect the qualified shape and spatial configuration characteristics for canopy gaps in the Lienhuachih Experimental Forest in Taiwan in 1998 and 2002. Non-hierarchical cluster analysis was used to assess the optimal number of gap clusters and canonical discriminant analysis was used to generate the discriminant functions for canopy gap classification. The gaps for the two periods were optimally classified into three categories. In general, gap type 1 had a more complex shape, gap type 2 was more elongated and gap type 3 had the largest gaps that were more regular in shape. The results were evaluated using Wilks’ lambda as satisfactory (p < 0.001). The agreement rate of confusion matrices exceeded 96%. Differences in gap characteristics between the classified gap types that were determined using a one-way ANOVA showed a statistical significance in all patch indices (p = 0.00), except for the Euclidean nearest neighbor distance (ENN) in 2002. Taken together, these results demonstrated the feasibility and applicability of the proposed methodology to classify the shape of a gap. PMID:27901127

Gap Shape Classification using Landscape Indices and Multivariate Statistics.

PubMed

Wu, Chih-Da; Cheng, Chi-Chuan; Chang, Che-Chang; Lin, Chinsu; Chang, Kun-Cheng; Chuang, Yung-Chung

2016-11-30

This study proposed a novel methodology to classify the shape of gaps using landscape indices and multivariate statistics. Patch-level indices were used to collect the qualified shape and spatial configuration characteristics for canopy gaps in the Lienhuachih Experimental Forest in Taiwan in 1998 and 2002. Non-hierarchical cluster analysis was used to assess the optimal number of gap clusters and canonical discriminant analysis was used to generate the discriminant functions for canopy gap classification. The gaps for the two periods were optimally classified into three categories. In general, gap type 1 had a more complex shape, gap type 2 was more elongated and gap type 3 had the largest gaps that were more regular in shape. The results were evaluated using Wilks' lambda as satisfactory (p < 0.001). The agreement rate of confusion matrices exceeded 96%. Differences in gap characteristics between the classified gap types that were determined using a one-way ANOVA showed a statistical significance in all patch indices (p = 0.00), except for the Euclidean nearest neighbor distance (ENN) in 2002. Taken together, these results demonstrated the feasibility and applicability of the proposed methodology to classify the shape of a gap.

Variable criteria sequential stopping rule: Validity and power with repeated measures ANOVA, multiple correlation, MANOVA and relation to Chi-square distribution.

PubMed

Fitts, Douglas A

2017-09-21

The variable criteria sequential stopping rule (vcSSR) is an efficient way to add sample size to planned ANOVA tests while holding the observed rate of Type I errors, α o , constant. The only difference from regular null hypothesis testing is that criteria for stopping the experiment are obtained from a table based on the desired power, rate of Type I errors, and beginning sample size. The vcSSR was developed using between-subjects ANOVAs, but it should work with p values from any type of F test. In the present study, the α o remained constant at the nominal level when using the previously published table of criteria with repeated measures designs with various numbers of treatments per subject, Type I error rates, values of ρ, and four different sample size models. New power curves allow researchers to select the optimal sample size model for a repeated measures experiment. The criteria held α o constant either when used with a multiple correlation that varied the sample size model and the number of predictor variables, or when used with MANOVA with multiple groups and two levels of a within-subject variable at various levels of ρ. Although not recommended for use with χ 2 tests such as the Friedman rank ANOVA test, the vcSSR produces predictable results based on the relation between F and χ 2 . Together, the data confirm the view that the vcSSR can be used to control Type I errors during sequential sampling with any t- or F-statistic rather than being restricted to certain ANOVA designs.

Mesopic pupil size in a refractive surgery population (13,959 eyes).

PubMed

Linke, Stephan J; Baviera, Julio; Munzer, Gur; Fricke, Otto H; Richard, Gisbert; Katz, Toam

2012-08-01

To evaluate factors that may affect mesopic pupil size in refractive surgery candidates. Medical records of 13,959 eyes of 13,959 refractive surgery candidates were reviewed, and one eye per subject was selected randomly for statistical analysis. Detailed ophthalmological examination data were obtained from medical records. Preoperative measurements included uncorrected distance visual acuity, corrected distance visual acuity, manifest and cycloplegic refraction, topography, slit lamp examination, and funduscopy. Mesopic pupil size measurements were performed with Colvard pupillometer. Relationship between mesopic pupil size and age, gender, refractive state, average keratometry, and pachymetry (thinnest point) were analyzed by means of ANOVA (+ANCOVA) and multivariate regression analyses. Overall mesopic pupil size was 6.45 ± 0.82 mm, and mean age was 36.07 years. Mesopic pupil size was 5.96 ± 0.8 mm in hyperopic astigmatism, 6.36 ± 0.83 mm in high astigmatism, and 6.51 ± 0.8 mm in myopic astigmatism. The difference in mesopic pupil size between all refractive subgroups was statistically significant (p < 0.001). Age revealed the strongest correlation (r = -0.405, p < 0.001) with mesopic pupil size. Spherical equivalent showed a moderate correlation (r = -0.136), whereas keratometry (r = -0.064) and pachymetry (r = -0.057) had a weak correlation with mesopic pupil size. No statistically significant difference in mesopic pupil size was noted regarding gender and ocular side. The sum of all analyzed factors (age, refractive state, keratometry, and pachymetry) can only predict the expected pupil size in <20% (R = 0.179, p < 0.001). Our analysis confirmed that age and refractive state are determinative factors on mesopic pupil size. Average keratometry and minimal pachymetry exhibited a statistically significant, but clinically insignificant, impact on mesopic pupil size.

Comparison of the Effect of Dry Cupping Therapy and Acupressure at BL23 Point on Intensity of Postpartum Perineal Pain Based on the Short Form of McGill Pain Questionnaire.

PubMed

Akbarzade, Marzieh; Ghaemmaghami, Mehrnoush; Yazdanpanahi, Zahra; Zare, Najaf; Mohagheghzadeh, Abdolali; Azizi, Amir

2016-01-01

Perineal pain is a major morbidity in the first few days after delivery. This study aimed to investigate the effect of dry cupping therapy and acupressure at BL23 point on the intensity of postpartum perineal pain based on the short-form of McGill pain questionnaire (SMPQ). The present clinical trial was conducted on 150 subjects in 3 groups of 50 cases. After at least 4-8 hr of delivery, cupping therapy was performed for 15-20 min up to 3 times a week (once a day) and acupressure was performed for 15-20 min based on clockwise model. The short-form of McGill pain questionnaire was completed both before and after the intervention. The SPSS statistical software was used to analyze the data using repeated measures ANOVA. Besides, p<0.05 was considered statistically significant. In the cupping therapy group, mean of the perineal pain intensity reduced from 37.5±6.8 before the intervention to 11.1±6.1, 6.9±4.7, and 3.8±3.6 immediately, 24 hr, and 2 weeks after the intervention, respectively. The results of study showed that the differences between the intervention and control groups were statistically significant (p<0.01). Mean difference of the perineal pain intensity in the acupressure group reached from 35.6±8.1 before the intervention to 10.4±5.5 two weeks after the intervention, so the variation between intervention and control groups was statistically significant. The study findings showed that cupping therapy and acupressure reduced perineal pain. Therefore, they may be considered as effective treatments for reducing pain intensity of allowing delivery.

The correlation between effective factors of e-learning and demographic variables in a post-graduate program of virtual medical education in Tehran University of Medical Sciences.

PubMed

Golband, Farnoosh; Hosseini, Agha Fatemeh; Mojtahedzadeh, Rita; Mirhosseini, Fakhrossadat; Bigdeli, Shoaleh

2014-01-01

E-learning as an educational approach has been adopted by diverse educational and academic centers worldwide as it facilitates learning in facing the challenges of the new era in education. Considering the significance of virtual education and its growing practice, it is of vital importance to examine its components for promoting and maintaining success. This analytical cross-sectional study was an attempt to determine the relationship between four factors of content, educator, learner and system, and effective e-learning in terms of demographic variables, including age, gender, educational background, and marital status of postgraduate master's students (MSc) studying at virtual faculty of Tehran University of Medical Sciences. The sample was selected by census (n=60); a demographic data gathering tool and a researcher-made questionnaire were used to collect data. The face and content validity of both tools were confirmed and the results were analyzed by descriptive statistics (frequency, percentile, standard deviation and mean) and inferential statistics (independent t-test, Scheffe's test, one-way ANOVA and Pearson correlation test) by using SPSS (V.16). The present study revealed that There was no statistically significant relationship between age and marital status and effective e-learning (P>0.05); whereas, there was a statistically significant difference between gender and educational background with effective e-learning (P<0.05). Knowing the extent to which these factors can influence effective e-learning can help managers and designers to make the right decisions about educational components of e-learning, i.e. content, educator, system and learner and improve them to create a more productive learning environment for learners.

Alveolar bone level changes in maxillary expansion treatments assessed through CBCT.

PubMed

Pham, Vi; Lagravère, Manuel O

2017-03-01

Determine changes in alveolar bone levels during expansion treatments as assessed through cone-beam computer tomography (CBCT). Sixty-one patients from Edmonton, Canada, with maxillary transverse deficiencies were split into three groups. One group was treated with a bone-anchored expander, another group was treated with a tooth-borne maxillary expander (Hyrax) and one group was untreated. CBCTs were obtained from each patient at two time points (initialT 1 and at removal of appliance after 6 months T 2 ). CBCTs were analyzed using AVIZO software and landmarks were placed on different dental and skeletal structures. Intra-examiner reliability for landmarks was done by randomly selecting 10 images and measuring each landmark 3 times, 1 week apart. Descriptive statistics, intraclass correlation coefficients (ICC) and ANOVA analysis were used to determine if there were changes to the alveolar bone levels and if these changes were statistically significant within each group. Landmarks reliability showed an ICC of at least 0.99 with a 95% confidence interval and a mean measurement error of at least 0.2067mm. Descriptive statistics show that changes in alveolar bone levels were less than 1mm for all three groups and therefore clinically insignificant. Changes between groups were not statistically different (P<0.05) from one another with the exception of 8 distances. However, since the distances were small, they were not considered clinically significant. Alveolar bone level changes were similar in maxillary expansion treatments and in the control group. The effects of maxillary expansion treatments on alveolar bone levels are not clinically significant. Copyright © 2016 CEO. Published by Elsevier Masson SAS. All rights reserved.

Educational Technology-Related Performance of Teaching Faculty in Higher Education: Implications for eLearning Management

ERIC Educational Resources Information Center

Larbi-Apau, Josephine A.; Guerra-Lopez, Ingrid; Moseley, James L.; Spannaus, Timothy; Yaprak, Attila

2017-01-01

The study examined teaching faculty's educational technology-related performances (ETRP) as a measure for predicting eLearning management in Ghana. A total of valid data (n = 164) were collected and analyzed on applied ISTE-NETS-T Performance Standards using descriptive and ANOVA statistics. Results showed an overall moderate performance with the…

Early Childhood Inservice and Preservice Teachers' Perceived Levels of Preparedness to Handle Stress in Their Students

ERIC Educational Resources Information Center

Onchwari, Jacqueline

2010-01-01

This article reports a study that investigated preservice and inservice early childhood teachers' perceived levels of preparedness to handle stress in early childhood and elementary education students. A survey that included vignettes was used to collect data. Data were analyzed both qualitatively and statistically, using one-way ANOVA, "t"-test,…

Marginal discrepancy of CAD-CAM complete-arch fixed implant-supported frameworks.

PubMed

Yilmaz, Burak; Kale, Ediz; Johnston, William M

2018-02-21

Computer-aided design and computer-aided manufacturing (CAD-CAM) high-density polymers (HDPs) have recently been marketed for the fabrication of long-term interim implant-supported fixed prostheses. However, information regarding the precision of fit of CAD-CAM HDP implant-supported complete-arch screw-retained prostheses is scarce. The purpose of this in vitro study was to evaluate the marginal discrepancy of CAD-CAM HDP complete-arch implant-supported screw-retained fixed prosthesis frameworks and compare them with conventional titanium (Ti) and zirconia (Zir) frameworks. A screw-retained complete-arch acrylic resin prototype with multiunit abutments was fabricated on a typodont model with 2 straight implants in the anterior region and 2 implants with a 30-degree distal tilt in the posterior region. A 3-dimensional (3D) laboratory laser scanner was used to digitize the typodont model with scan bodies and the resin prototype to generate a virtual 3D CAD framework. A CAM milling unit was used to fabricate 5 frameworks from HDP, Ti, and Zir blocks. The 1-screw test was performed by tightening the prosthetic screw in the maxillary left first molar abutment (terminal location) when the frameworks were on the typodont model, and the marginal discrepancy of frameworks was evaluated using an industrial computed tomographic scanner and a 3D volumetric software. The 3D marginal discrepancy at the abutment-framework interface of the maxillary left canine (L1), right canine (L2), and right first molar (L3) sites was measured. The mean values for 3D marginal discrepancy were calculated for each location in a group with 95% confidence limits. The results were analyzed by repeated-measures 2-way ANOVA using the restricted maximum likelihood estimation and the Satterthwaite degrees of freedom methods, which do not require normality and homoscedasticity in the data. The between-subjects factor was material, the within-subjects factor was location, and the interaction was included in the model. Tukey tests were applied to resolve any statistically significant source of variation (overall α=.05). The 3D marginal discrepancy measurement was possible only for L2 and L3 because the L1 values were too small to detect. The mean discrepancy values at L2 were 60 μm for HDP, 74 μm for Ti, and 84 μm for Zir. At the L3 location, the mean discrepancy values were 55 μm for HDP, 102 μm for Ti, and 94 μm for Zir. The ANOVA did not find a statistically significant overall effect for implant location (P=.072) or a statistically significant interaction of location and material (P=.078), but it did find a statistically significant overall effect of material (P=.019). Statistical differences were found overall between HDP and the other 2 materials (P≤.037). When the tested materials were used with the CAD-CAM system, the 3D marginal discrepancy of CAD-CAM HDP frameworks was smaller than that of titanium or zirconia frameworks. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Estimation of Salivary Parameters among Autoimmune Thyroiditis Patients

PubMed Central

Reddy, BH Satheesh; Ramamurthy, TK; Rajendra, Kavitha; Nerella, Narendra Kumar; Krishnan, Meenakshi; Ramesh, MV; Mohammed, Rezwana Begum

2017-01-01

Introduction Saliva is a complex secretion that protects and lubricates the oral cavity. Various systemic diseases and their treatment alter the salivary gland function; one such disease is Autoimmune Thyroid Disease (AITD). AITD has been postulated to exert its hormonal influence on the salivary glands, leading to reduced salivary output. There’s a paucity of literature, verifying the stated conjunction in human subjects. Aim The aim was to investigate the salivary profile in AITD patients and its comparison with controls. Materials and Methods Descriptive cross-sectional comparative study was conducted using convenience sampling method for screening the presence of thyroid disorders. Two groups comprising of 30 patients in each group diagnosed with autoimmune hypothyroiditis (n=30) and hyperthyroiditis (n=30) respectively and thirty healthy volunteers who were age and sex matched were included as controls. Saliva was collected and evaluated for Unstimulated Salivary Flow Rate (USSFR), pH and buffer capacity. ANOVA and Tukey post-hoc test was performed to find the statistical significance and for pairwise comparison. Results Statistically significant difference was observed between autoimmune hypothyroiditis, autoimmune hyperthyroiditis and control group with respect to USSFR (p<0.007), pH (p<0.001) and buffer capacity (p<0.001). On pairwise comparisons statistically significant difference was observed between autoimmune hypothyroiditis and autoimmune hyperthyroiditis with respect to controls. Conclusion We conclude that significant involvement of salivary glands may occur in cases of AITD. Our study showed significant reduction of sialometric values in AITD patients when compared to controls. A strong clinical suspicion of thyroid diseases should be considered when there is chronic hyposalivation; hence thyroid profile must also be done, if the known causes have been excluded. PMID:28893031

Evaluation of hyperglycaemic response to intra-operative dexamethasone administration in patients undergoing elective intracranial surgery: A randomised, prospective study.

PubMed

Sethi, Rakesh; Naqash, Imtiaz A; Bajwa, Sukhminder Jit Singh; Dutta, Vikas; Ramzan, Altaf Umar; Zahoor, Syed Amir

2016-01-01

The glucocorticoid dexamethasone in a bolus dose of 8-10 mg followed by quarterly dose of 4 mg is commonly used during intracranial surgery so as to reduce oedema and vascular permeability. However, the detrimental hyperglycaemic effects of dexamethasone may override its potentially beneficial effects. The present prospective, randomised study aimed at comparing the degree and magnitude of hyperglycaemia induced by prophylactic administration of dexamethasone in patients undergoing elective craniotomy. Sixty American Society of Anaesthesiologist (ASA) grade-I and II patients were randomly assigned to three groups of 20 patients each. Group-I received dexamethasone during surgery for the first time. Group-II received dexamethasone in addition to receiving it pre-operatively, whereas Group-III (control group) patients were administered normal saline as placebo. Baseline blood glucose (BG) was measured in all the three groups before induction of anaesthesia and thereafter after every hour for 4 h and then two-hourly. Besides intra- and intergroup comparison of BG, peak BG concentration was also recorded for each patient. Statistical analysis was carried out with analysis of variance (ANOVA) and Student's t-test and value of P < 0.05 was considered statistically significant. Baseline BG reading were higher and statistically significant in Group-II as compared with Group-I and Group-III (P < 0.05). However, peak BG levels were significantly higher in Group-I than in Group-II and III (P < 0.05). Similarly, the magnitude of change in peak BG was significantly higher in Group-I as compared to Group-II and III (P < 0.05). Peri-operative administration of dexamethasone during neurosurgical procedures can cause significant increase in BG concentration especially in patients who receive dexamethasone intra-operatively only.

Evaluation of hyperglycaemic response to intra-operative dexamethasone administration in patients undergoing elective intracranial surgery: A randomised, prospective study

PubMed Central

Sethi, Rakesh; Naqash, Imtiaz A.; Bajwa, Sukhminder Jit Singh; Dutta, Vikas; Ramzan, Altaf Umar; Zahoor, Syed Amir

2016-01-01

Background and Aim: The glucocorticoid dexamethasone in a bolus dose of 8-10 mg followed by quarterly dose of 4 mg is commonly used during intracranial surgery so as to reduce oedema and vascular permeability. However, the detrimental hyperglycaemic effects of dexamethasone may override its potentially beneficial effects. The present prospective, randomised study aimed at comparing the degree and magnitude of hyperglycaemia induced by prophylactic administration of dexamethasone in patients undergoing elective craniotomy. Materials and Methods: Sixty American Society of Anaesthesiologist (ASA) grade-I and II patients were randomly assigned to three groups of 20 patients each. Group-I received dexamethasone during surgery for the first time. Group-II received dexamethasone in addition to receiving it pre-operatively, whereas Group-III (control group) patients were administered normal saline as placebo. Baseline blood glucose (BG) was measured in all the three groups before induction of anaesthesia and thereafter after every hour for 4 h and then two-hourly. Besides intra- and intergroup comparison of BG, peak BG concentration was also recorded for each patient. Statistical analysis was carried out with analysis of variance (ANOVA) and Student's t-test and value of P < 0.05 was considered statistically significant. Results: Baseline BG reading were higher and statistically significant in Group-II as compared with Group-I and Group-III (P < 0.05). However, peak BG levels were significantly higher in Group-I than in Group-II and III (P < 0.05). Similarly, the magnitude of change in peak BG was significantly higher in Group-I as compared to Group-II and III (P < 0.05). Conclusion: Peri-operative administration of dexamethasone during neurosurgical procedures can cause significant increase in BG concentration especially in patients who receive dexamethasone intra-operatively only. PMID:27057213

Bleaching agent action on color stability, surface roughness and microhardness of composites submitted to accelerated artificial aging.

PubMed

Rattacaso, Raphael Mendes Bezerra; da Fonseca Roberti Garcia, Lucas; Aguilar, Fabiano Gamero; Consani, Simonides; de Carvalho Panzeri Pires-de-Souza, Fernanda

2011-04-01

The purpose of this study was to evaluate the bleaching agent action on color stability, surface roughness and microhardness of composites (Charisma, Filtek Supreme and Heliomolar - A2) submitted to accelerated artificial aging (AAA). A Teflon matrix (12 x 2 mm) was used to fabricate 18 specimens (n=6) which, after polishing (Sof-Lex), were submitted to initial color reading (ΔE), Knoop microhardness (KHN) (50 g/15 s load) and roughness (R(a)) (cut-off 0.25 mm) tests. Afterwards, the samples were submitted to AAA for 384 hours and new color, microhardness and roughness readings were performed. After this, the samples were submitted to daily application (4 weeks) of 16% Carbamide Peroxide (NiteWhite ACP) for 8 hours and kept in artificial saliva for 16 hours. New color, microhardness and roughness readings were made at the end of the cycle, and 15 days after bleaching. Comparison of the ΔE means (2-way ANOVA, Bonferroni, P<.05) indicated clinically unacceptable color alteration for all composites after AAA, but without significant difference. Statistically significant increase in the KHN values after AAA was observed, but without significant alterations 15 days after bleaching. For R(a) there was no statistically significant difference after AAA and 15 days after bleaching. The alterations promoted by the bleaching agent and AAA are material dependent.

Influence of the processing route of porcelain/Ti-6Al-4V interfaces on shear bond strength.

PubMed

Toptan, Fatih; Alves, Alexandra C; Henriques, Bruno; Souza, Júlio C M; Coelho, Rui; Silva, Filipe S; Rocha, Luís A; Ariza, Edith

2013-04-01

This study aims at evaluating the two-fold effect of initial surface conditions and dental porcelain-to-Ti-6Al-4V alloy joining processing route on the shear bond strength. Porcelain-to-Ti-6Al-4V samples were processed by conventional furnace firing (porcelain-fused-to-metal) and hot pressing. Prior to the processing, Ti-6Al-4V cylinders were prepared by three different surface treatments: polishing, alumina or silica blasting. Within the firing process, polished and alumina blasted samples were subjected to two different cooling rates: air cooling and a slower cooling rate (65°C/min). Metal/porcelain bond strength was evaluated by shear bond test. The data were analyzed using one-way ANOVA followed by Tuckey's test (p<0.05). Before and after shear bond tests, metallic surfaces and metal/ceramic interfaces were examined by Field Emission Gun Scanning Electron Microscope (FEG-SEM) equipped with Energy Dispersive X-Ray Spectroscopy (EDS). Shear bond strength values of the porcelain-to-Ti-6Al-4V alloy interfaces ranged from 27.1±8.9MPa for porcelain fused to polished samples up to 134.0±43.4MPa for porcelain fused to alumina blasted samples. According to the statistical analysis, no significant difference were found on the shear bond strength values for different cooling rates. Processing method was statistically significant only for the polished samples, and airborne particle abrasion was statistically significant only for the fired samples. The type of the blasting material did not cause a statistically significant difference on the shear bond strength values. Shear bond strength of dental porcelain to Ti-6Al-4V alloys can be significantly improved from controlled conditions of surface treatments and processing methods. Copyright © 2013 Elsevier Ltd. All rights reserved.

Role of Adenosine Receptor A2A in Traumatic Optic Neuropathies (Addendum)

DTIC Science & Technology

2016-03-01

inflammation was evaluated using Western blot, Real-Time PCR and immuno-staining analyses. Role of A2AAR signaling in the anti-inflammation effect of ABT...Neuroimmunology 277 (2014) 96–104were evaluated by analysis of variance (one-way ANOVA), and the significance of differences between groups was assessed by the...Ahmad et al. / Journal of Neuroimmunology 277 (2014) 96–104were evaluated by analysis of variance (one-way ANOVA), and the significance of differences

Analysis of Longitudinal Outcome Data with Missing Values in Total Knee Arthroplasty.

PubMed

Kang, Yeon Gwi; Lee, Jang Taek; Kang, Jong Yeal; Kim, Ga Hye; Kim, Tae Kyun

2016-01-01

We sought to determine the influence of missing data on the statistical results, and to determine which statistical method is most appropriate for the analysis of longitudinal outcome data of TKA with missing values among repeated measures ANOVA, generalized estimating equation (GEE) and mixed effects model repeated measures (MMRM). Data sets with missing values were generated with different proportion of missing data, sample size and missing-data generation mechanism. Each data set was analyzed with three statistical methods. The influence of missing data was greater with higher proportion of missing data and smaller sample size. MMRM tended to show least changes in the statistics. When missing values were generated by 'missing not at random' mechanism, no statistical methods could fully avoid deviations in the results. Copyright © 2016 Elsevier Inc. All rights reserved.

Management of Chronic Periodontitis Using Chlorhexidine Chip and Diode Laser-A Clinical Study.

PubMed

Jose, Kachapilly Arun; Ambooken, Majo; Mathew, Jayan Jacob; Issac, Annie Valayil; Kunju, Ajithkumar Parachalil; Parameshwaran, Renjith Athirkandathil

2016-04-01

The use of adjuncts like chlorhexidine local delivery and diode laser decontamination have been found to improve the clinical outcomes of scaling and root planing in non-surgical periodontal therapy in patients with chronic periodontitis. To evaluate the effects of diode laser and chlorhexidine chip as adjuncts to scaling and root planing in the management of chronic periodontitis. The objective is to evaluate the outcome of chlorhexidine chip and diode laser as adjuncts to scaling and root planing on clinical parameters like Plaque Index, Gingival Index, probing pocket depth and clinical attachment level. Department of Periodontics. Randomized clinical trial with split mouth design. Fifteen chronic periodontitis patients having a probing pocket depth of 5mm-7mm on at least one interproximal site in each quadrant of the mouth were included in the study. After initial treatment, four sites in each patient were randomly subjected to scaling and root planing (control), chlorhexidine chip application (CHX chip group), diode laser (810 nm) decontamination (Diode laser group) or combination of both (Diode laser and chip group). Plaque Index (PI), Gingival Index (GI), probing pocket depth (PPD) and clinical attachment level (CAL) were assessed at baseline, one month and three months. Results were statistically analysed using paired T test, one-way ANOVA, Tukey's HSD test and repeated measure ANOVA. Post-treatment, the test and control sites showed a statistically significant reduction in PI, GI, PPD, and CAL. After three months, a mean PPD reduction of 1.47±0.52 mm in control group, 1.40±0.83 mm in diode laser group, 2.67±0.62 mm in CHX group, and 2.80± 0.77 mm in combination group was seen. The mean gain in CAL were 1.47±0.52 mm in the control group, 1.40±0.83 mm in diode laser group, 2.67± 0.49 mm in CHX group and 2.67± 0.82 mm in combination group respectively. The differences in PPD reduction and CAL gain between control group and CHX chip and combination groups were statistically significant (p<0.05) at three months, whereas, the diode laser group did not show any significant difference from the control group. Chlorhexidine local delivery alone or in combination with diode laser decontamination is effective in reducing probing pocket depth and improving clinical attachment levels when used as adjuncts to scaling and root planing in non-surgical periodontal therapy of patients with chronic periodontitis.

Sudden death and cervical spine: A new contribution to pathogenesis for sudden death in critical care unit from subarachnoid hemorrhage; first report – An experimental study

PubMed Central

Kazdal, Hizir; Kanat, Ayhan; Aydin, Mehmet Dumlu; Yazar, Ugur; Guvercin, Ali Riza; Calik, Muhammet; Gundogdu, Betul

2017-01-01

Context: Sudden death from subarachnoid hemorrhage (SAH) is not uncommon. Aims: The goal of this study is to elucidate the effect of the cervical spinal roots and the related dorsal root ganglions (DRGs) on cardiorespiratory arrest following SAH. Settings and Design: This was an experimental study conducted on rabbits. Materials and Methods: This study was conducted on 22 rabbits which were randomly divided into three groups: control (n = 5), physiologic serum saline (SS; n = 6), SAH groups (n = 11). Experimental SAH was performed. Seven of 11 rabbits with SAH died within the first 2 weeks. After 20 days, other animals were sacrificed. The anterior spinal arteries, arteriae nervorum of cervical nerve roots (C6–C8), DRGs, and lungs were histopathologically examined and estimated stereologically. Statistical Analysis Used: Statistical analysis was performed using the PASW Statistics 18.0 for Windows (SPSS Inc., Chicago, Illinois, USA). Intergroup differences were assessed using a one-way ANOVA. The statistical significance was set at P < 0.05. Results: In the SAH group, histopathologically, severe anterior spinal artery (ASA) and arteriae nervorum vasospasm, axonal and neuronal degeneration, and neuronal apoptosis were observed. Vasospasm of ASA did not occur in the SS and control groups. There was a statistically significant increase in the degenerated neuron density in the SAH group as compared to the control and SS groups (P < 0.05). Cardiorespiratory disturbances, arrest, and lung edema more commonly developed in animals in the SAH group. Conclusion: We noticed interestingly that C6–C8 DRG degenerations were secondary to the vasospasm of ASA, following SAH. Cardiorespiratory disturbances or arrest can be explained with these mechanisms. PMID:28250634

Accuracy of torque-limiting devices: A comparative evaluation.

PubMed

Albayrak, Haydar; Gumus, Hasan Onder; Tursun, Funda; Kocaagaoglu, Hasan Huseyin; Kilinc, Halil Ibrahim

2017-01-01

To prevent the loosening of implant screws, clinicians should be aware of the output torque values needed to achieve the desired preload. Accurate torque-control devices are crucial in this regard; however, little information is currently available comparing the accuracy of mechanical with that of electronic torque-control devices. The purpose of this in vitro study was to identify and compare the accuracy of different types of torque-control devices. Devices from 5 different dental implant manufacturers were evaluated, including 2 spring-type (Straumann, Implance) mechanical devices (MTLD), 2 friction-type (Biohorizons, Dyna) MTLDs, and 1 (Megagen) electronic torque-control device (ETLD). For each manufacturer, 5 devices were tested 5 times with a digital torque tester, and the average for each device was calculated and recorded. The percentage of absolute deviations from the target torque values (PERDEV) were calculated and compared by using 1-way ANOVA. A 1-sample t test was used to evaluate the ability of each device to achieve its target torque value within a 95% confidence interval for the true population mean of measured values (α=.05 for all statistical analyses). One-way ANOVAs revealed statistically significant differences among torque-control devices (P<.001). ETLD showed higher PERDEVs (28.33 ±9.53) than MTLDs (P<.05), whereas PERDEVS of friction-type (7.56 ±3.64) and spring-type (10.85 ±4.11) MTLDs did not differ significantly. In addition, devices produced by Megagen had a significantly higher (P<.05) PERDEV (28.33 ±9.53) other devices, whereas no differences were found in devices manufactured by Biohorizons (7.31 ±5.34), Dyna (7.82 ±1.08), Implance (8.43 ±4.77), and Straumann (13.26 ±0.79). However, 1-sample t tests showed none of the torque-control devices evaluated in this study were capable of achieving their target torque values (P<.05). Within the limitations of this in vitro study, MTLDs were shown to be significantly more accurate than ETLDs. However, none of the torque-control devices evaluated were able to meet their target torque values successfully. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Comparison of quality of sleep, depression, and life satisfaction between older adults in nursing homes and long-term care hospitals in Korea.

PubMed

Kim, Kon Hee; Hwang, Eun Hee

2017-01-01

The purpose of the present study was to identify the sleep quality, depression, and life satisfaction between nursing home and long-term care hospital residents. Data was collected through a structured questionnaire survey of 61 nursing home residents and 74 long-term care hospital residents. Descriptive statistics, t-test, χ 2 -test, anova, Pearson's correlation were used to analyze the data. The residents living in a nursing home showed higher subjective health status and sleep quality than long-term care hospital residents. Depression did not show a significant difference between them. However, there was a significant difference in depression score by subjective health status. Sleep quality and depression showed a significant negative correlation for both residents. In terms of depression and life satisfaction, nursing home residents showed a significant negative correlation, and long-term care hospital residents showed a significant positive correlation. These results show that environmental management is essential to enhance sleep quality, thus depression and subjective health status will be improved. Geriatr Gerontol Int 2017; 17: 142-149. © 2015 Japan Geriatrics Society.

Effect of one-step polishing system on the color stability of nanocomposites.

PubMed

Alawjali, S S; Lui, J L

2013-08-01

This study was to compare the effect of three different one-step polishing systems on the color stability of three different types of nanocomposites after immersion in coffee for one day and seven days and determine which nanocomposite material has the best color stability following polishing with each of the one-step polishing system. The nanocomposites tested were Tetric EvoCeram, Grandio and Herculite Précis. A total of 120 discs (40/nanocomposite, 8mm×2mm) were fabricated. Ten specimens for each nanocomposite cured under Mylar strips served as the control. The other specimens were polished with OptraPol, OneGloss and Occlubrush immersed in coffee (Nescafé) up to seven days. Color measurements were made with a spectrophotometer at baseline and after one and seven days. Two way repeated measure ANOVA, two way ANOVA and Bonferroni tests were used for statistical analyses (P<0.05). The immersion time was a significant factor in the discoloration of the nanocomposites. The effect of three one-step polishing systems on the color stability was also significant. The color change values of the materials cured against Mylar strips were the greatest. The lowest mean color change values were from the Occlubrush polished groups. The effect of the three different types of nanocomposite on the color change was significant. The highest color change values were with Tetric EvoCeram groups. The lowest color change values were with Herculite Précis groups. The color change of nanocomposite resins is affected by the type of composite, polishing procedure and the period of immersion in the staining agent. Copyright © 2012 Elsevier Ltd. All rights reserved.

The importance of cutaneous feedback on neural activation during maximal voluntary contraction.

PubMed

Cruz-Montecinos, Carlos; Maas, Huub; Pellegrin-Friedmann, Carla; Tapia, Claudio

2017-12-01

The purpose of this study was to investigate the importance of cutaneous feedback on neural activation during maximal voluntary contraction (MVC) of the ankle plantar flexors. The effects of cutaneous plantar anaesthesia were assessed in 15 subjects and compared to 15 controls, using a one-day pre/post-repeated measures design. Cutaneous plantar anaesthesia was induced by lidocaine injection at the centre of forefoot, lateral midfoot, and heel. Each subject performed isometric MVCs of the ankle plantar flexors. During each isometric ramp contraction, the following variables were assessed: maximal isometric torque; surface electromyography (EMG) activity of the medial gastrocnemius (MG) and tibialis anterior (TA) muscles; and co-contraction index (CCI) between the MG and TA. For ankle torque, two-way ANOVA showed no significant interaction between the pre/post-measurements × group (p = 0.166). However, MG activity presented significant interactions between the pre/post-measurements × group (p = 0.014). Post hoc comparisons indicated a decrease of MG activity in the experimental group, from 85.9 ± 11.9 to 62.7 ± 30.8% (p = 0.016). Additionally, the post-anaesthesia MG activity of the experimental group differed statistically with pre- and post-MG activity of the control group (p = 0.027 and p = 0.008, respectively). For TA activity and CCI, two-way ANOVA detected no significant interactions between the pre/post-measurements × group (p = 0.605 and p = 0.332, respectively). Our results indicate that during MVC, cutaneous feedback modulates neural activity to MG muscle, without changing the extent of MG-TA co-contraction.

Marginal and internal fit of cobalt-chromium copings fabricated using the conventional and the direct metal laser sintering techniques: A comparative in vitro study.

PubMed

Ullattuthodi, Sujana; Cherian, Kandathil Phillip; Anandkumar, R; Nambiar, M Sreedevi

2017-01-01

This in vitro study seeks to evaluate and compare the marginal and internal fit of cobalt-chromium copings fabricated using the conventional and direct metal laser sintering (DMLS) techniques. A master model of a prepared molar tooth was made using cobalt-chromium alloy. Silicone impression of the master model was made and thirty standardized working models were then produced; twenty working models for conventional lost-wax technique and ten working models for DMLS technique. A total of twenty metal copings were fabricated using two different production techniques: conventional lost-wax method and DMLS; ten samples in each group. The conventional and DMLS copings were cemented to the working models using glass ionomer cement. Marginal gap of the copings were measured at predetermined four points. The die with the cemented copings are standardized-sectioned with a heavy duty lathe. Then, each sectioned samples were analyzed for the internal gap between the die and the metal coping using a metallurgical microscope. Digital photographs were taken at ×50 magnification and analyzed using measurement software. Statistical analysis was done by unpaired t -test and analysis of variance (ANOVA). The results of this study reveal that no significant difference was present in the marginal gap of conventional and DMLS copings ( P > 0.05) by means of ANOVA. The mean values of internal gap of DMLS copings were significantly greater than that of conventional copings ( P < 0.05). Within the limitations of this in vitro study, it was concluded that the internal fit of conventional copings was superior to that of the DMLS copings. Marginal fit of the copings fabricated by two different techniques had no significant difference.

Evaluation of the effect of aromatherapy with Rosa damascena Mill. on postoperative pain intensity in hospitalized children in selected hospitals affiliated to Isfahan University of Medical Sciences in 2013: A randomized clinical trial

PubMed Central

Marofi, Maryam; Sirousfard, Motahareh; Moeini, Mahin; Ghanadi, Alireza

2015-01-01

Background: Pain is the common complication after a surgery. The aim of this study was to evaluate the effect of aromatherapy with Rosa damascena Mill. on the postoperative pain in children. Materials and Methods: In a double-blind, placebo-controlled clinical trial, we selected 64 children of 3–6 years of age through convenient sampling and divided them randomly into two groups. Patients in group A were given inhalation aromatherapy with R. damascena Mill., and in group B, the patients were given almond oil as a placebo. Inhalation aromatherapy was used at the first time of subjects’ arrival to the ward and then at 3, 6, 9, and 12 h afterward. Common palliative treatments to relieve pain were used in both groups. Thirty minutes after aromatherapy, the postoperative pain in children was evaluated with the Toddler Preschooler Postoperative Pain Scale (TPPPS). Data were statistically analyzed using Chi-square test, one-way analysis of variance (ANOVA), and repeated measures ANOVA. Results: There was no significant difference in pain scores at the first time of subjects’ arrival to the ward (before receiving any aromatherapy or palliative care) between the two groups. After each time of aromatherapy and at the end of treatment, the pain score was significantly reduced in the aromatherapy group with R. damascena Mill. compared to the placebo group. Conclusions: According to our results, aromatherapy with R. damascena Mill. can be used in postoperative pain in children, together with other common treatments without any significant side effects. PMID:25878704

Relationship between crown-root angulation (collum angle) of maxillary central incisors in Class II, division 2 malocclusion and lower lip line.

PubMed

Srinivasan, Bhadrinath; Kailasam, Vignesh; Chitharanjan, Arun; Ramalingam, Arthi

2013-01-01

The present study aimed to measure the magnitude of the collum angle (crown-root angulation) of maxillary central incisors present in Class II, division 2 malocclusion and to relate the changes in its magnitude with variations in the lower lip line. A set of 120 conventional lateral cephalograms were selected and divided into three groups of 40 each based on the type of malocclusion presented: Class II, division 2 (group 1); Class II, division 1 (group 2); and Class I (group 3). The collum angle of the maxillary central incisor was measured, and the lower lip line was recorded. Analysis of variance (ANOVA) revealed that the mean collum angle was statistically significantly different in the three groups. The mean collum angle was greatest in Class II, division 2 malocclusion (group 1). The mean collum angles were 3.24 ± 4.69 degrees, 0.95 ± 1.06 degrees, and 1.05 ± 1.50 degrees in groups 1, 2, and 3 respectively. In χ ² test comparison of the location of the lower lip line (incisal, middle, or apical third of the central incisor) among the three groups, the lower lip line was found to contact the middle third of the central incisor most frequently in Class II, division 2 malocclusion. ANOVA followed by Tukey honestly significant difference (HSD) test showed that the mean collum angle is significantly increased when the lower lip is in the middle third (P < .05) of the central incisor. Variations in magnitude of the collum angle with the change in the lower lip line suggest a probable etiologic role of the lower lip line in the development of the collum angle.

Risk behaviours among early adolescents: risk and protective factors.

PubMed

Wang, Ruey-Hsia; Hsu, Hsiu-Yueh; Lin, Shu-Yuan; Cheng, Chung-Ping; Lee, Shu-Li

2010-02-01

This paper is a report of a study conducted to examine the influence of risk/protective factors on risk behaviours of early adolescents and whether protective factors moderate their impact. An understanding of how risk and protective factors operate to influence risk behaviours of early adolescents will better prepare nurses to perform interventions appropriately to reduce risk behaviours of early adolescents. A cross-sectional study was carried out, based on a sample of public junior high schools (from 7th to 9th grades) in one city and one county in Taiwan. An anonymous questionnaire designed to measure five risk factors, six protective factors and risk behaviours was administered from October 2006 to March 2007. Data from 878 students were used for the present analysis. Pearson's correlations, anova with random effect models, and generalized linear models were used to analyse the statistically significant explanatory variables for risk behaviours. Gender, perceived father's risk behaviour, perceived mother's risk behaviour, health self-efficacy, interaction of health self-efficacy and perceived peers' risk behaviour, and interaction of emotional regulation and perceived peers' risk behaviour were statistically significant explanatory variables of risk behaviours. Health self-efficacy and emotional regulation moderated the negative effects of peers' perceived risk behaviour on risk behaviours. All protective factors were negative statistically correlated with risk behaviours, and all risk factors positively statistically correlated with risk behaviours. Male adolescents should be considered an at-risk group for risk behaviour intervention. Nurses could provide early adolescents with training regarding health self-efficacy improvement, self-esteem enhancement, emotional regulation skills to reduce their risk behaviours.

Eta- and Partial Eta-Squared in L2 Research: A Cautionary Review and Guide to More Appropriate Usage

ERIC Educational Resources Information Center

Norouzian, Reza; Plonsky, Luke

2018-01-01

Eta-squared (?[superscript 2]) and partial eta-squared (?[subscript p][superscript 2]) are effect sizes that express the amount of variance accounted for by one or more independent variables. These indices are generally used in conjunction with ANOVA, the most commonly used statistical test in second language (L2) research (Plonsky, 2013).…

The Impact of Acculturation Strategy and Social Supports on Acculturative Stress and Academic Performance among Hispanic/Latino/a College Students

ERIC Educational Resources Information Center

Luciano, David

2012-01-01

This study examined the relationship between Acculturation Strategy and Social Supports on Acculturative Stress and Academic Performance Among Hispanic/Latino/a College students. The sample of approximately 522 students was recruited at the City College of The City University of New York. Various statistical methods, including one way ANOVAS,…

The Perceptions of Principals and Teachers Regarding Mental Health Providers' Impact on Student Achievement in High Poverty Schools

ERIC Educational Resources Information Center

Perry, Teresa

2012-01-01

This study examined the perceptions of principals and teachers regarding mental health provider's impact on student achievement and behavior in high poverty schools using descriptive statistics, t-test, and two-way ANOVA. Respondents in this study shared similar views concerning principal and teacher satisfaction and levels of support for the…

An Investigation of Collaborative Leadership

DTIC Science & Technology

2013-01-01

businesses . The second will use an analysis of variance (ANOVA) to statistically compare the variance among organizations. Research regarding collaborative...horizontal column of the “T,” a leader is networking across the larger business model to understand how their organization’s core skills can be used in...the exchange of information or services among individuals, groups, or institutions in order to cultivate productive business relationships

Recognizing the Signs and Symptoms of Youth and Adolescents That Experience Mental Health Problems and/or Crises

ERIC Educational Resources Information Center

Pritchett, Tierra M.

2017-01-01

Health First Aid at the Philadelphia Red Cross completed a survey with information pertaining to knowledge and confidence in recognizing the signs and symptoms of youth/adolescents that may be experiencing a mental health problem and or crisis. Descriptive statistics, independent t-tests, ANOVA, and Tukey tests were conducted to investigate the…

Disaster response team FAST skills training with a portable ultrasound simulator compared to traditional training: pilot study.

PubMed

Paddock, Michael T; Bailitz, John; Horowitz, Russ; Khishfe, Basem; Cosby, Karen; Sergel, Michelle J

2015-03-01

Pre-hospital focused assessment with sonography in trauma (FAST) has been effectively used to improve patient care in multiple mass casualty events throughout the world. Although requisite FAST knowledge may now be learned remotely by disaster response team members, traditional live instructor and model hands-on FAST skills training remains logistically challenging. The objective of this pilot study was to compare the effectiveness of a novel portable ultrasound (US) simulator with traditional FAST skills training for a deployed mixed provider disaster response team. We randomized participants into one of three training groups stratified by provider role: Group A. Traditional Skills Training, Group B. US Simulator Skills Training, and Group C. Traditional Skills Training Plus US Simulator Skills Training. After skills training, we measured participants' FAST image acquisition and interpretation skills using a standardized direct observation tool (SDOT) with healthy models and review of FAST patient images. Pre- and post-course US and FAST knowledge were also assessed using a previously validated multiple-choice evaluation. We used the ANOVA procedure to determine the statistical significance of differences between the means of each group's skills scores. Paired sample t-tests were used to determine the statistical significance of pre- and post-course mean knowledge scores within groups. We enrolled 36 participants, 12 randomized to each training group. Randomization resulted in similar distribution of participants between training groups with respect to provider role, age, sex, and prior US training. For the FAST SDOT image acquisition and interpretation mean skills scores, there was no statistically significant difference between training groups. For US and FAST mean knowledge scores, there was a statistically significant improvement between pre- and post-course scores within each group, but again there was not a statistically significant difference between training groups. This pilot study of a deployed mixed-provider disaster response team suggests that a novel portable US simulator may provide equivalent skills training in comparison to traditional live instructor and model training. Further studies with a larger sample size and other measures of short- and long-term clinical performance are warranted.

Reducing Behavior Problems Among Students with Autism Spectrum Disorder: Coaching Teachers in a Mixed-Reality Setting.

PubMed

Pas, Elise T; Johnson, Stacy R; Larson, Kristine E; Brandenburg, Linda; Church, Robin; Bradshaw, Catherine P

2016-12-01

Most approaches aiming to reduce behavior problems among youth with Autism Spectrum Disorder (ASD) focus on individual students; however, school personnel also need professional development to better support students. This study targeted teachers' skill development to promote positive outcomes for students with ASD. The sample included 19 teachers in two non-public special education settings serving students with moderate to severe ASD. Participating teachers received professional development and coaching in classroom management, with guided practice in a mixed-reality simulator. Repeated-measures ANOVAs examining externally-conducted classroom observations revealed statistically significant improvements in teacher management and student behavior over time. Findings suggest that coaching and guided practice in a mixed-reality simulator is perceived as acceptable and may reduce behavior problems among students with ASD.

Image quality evaluation for smart-phone displays at lighting levels of indoor and outdoor conditions

NASA Astrophysics Data System (ADS)

Gong, Rui; Xu, Haisong; Wang, Binyu; Luo, Ming Ronnier

2012-08-01

The image quality of two active matrix organic light emitting diode (AMOLED) smart-phone displays and two in-plane switching (IPS) ones was visually assessed at two levels of ambient lighting conditions corresponding to indoor and outdoor applications, respectively. Naturalness, colorfulness, brightness, contrast, sharpness, and overall image quality were evaluated via psychophysical experiment by categorical judgment method using test images selected from different application categories. The experimental results show that the AMOLED displays perform better on colorfulness because of their wide color gamut, while the high pixel resolution and high peak luminance of the IPS panels help the perception of brightness, contrast, and sharpness. Further statistical analysis of ANOVA indicates that ambient lighting levels have significant influences on the attributes of brightness and contrast.

Does actually mean chromosome number increase with latitude in vascular plants? An answer from the comparison of Italian, Slovak and Polish floras.

PubMed

Peruzzi, Lorenzo; Góralski, Grzegorz; Joachimiak, Andrzej J; Bedini, Gianni

2012-01-01

WE COMPARED CHROMOSOME NUMBER (CN) VARIATION AMONG VASCULAR FLORAS OF THREE DIFFERENT COUNTRIES WITH INCREASING LATITUDE IN THE BOREAL HEMISPHERE: Italy, Slovakia, Poland. Aim of the study was to verify whether the patterns of CN variation parallel the differences in latitudinal ranges. The three datasets comprised 3426 (Italy), 3493 (Slovakia) and 1870 (Poland) distinct cytotypes. Standard statistics (ANOVA, Kruskal-Wallis tests) evidenced significant differences among the three countries, mean CN increasing together with latitude. On the contrary, an inverse relation (r = -1) was evidenced among the frequency of odd CNs and latitude. Our results show that the hypothesis of a polyploid increase proportional with distance from the Equator seems to be confirmed, when territories from the same hemisphere are compared.

The Health, Enlightenment, Awareness, and Living (HEAL) Intervention: Outcome of an HIV and Hepatitis B and C Risk Reduction Intervention

PubMed Central

Henry-Akintobi, Tabia; Laster, Nastassia; Trotter, Jennie; Jacobs, DeBran; Johnson, Tarita; King Gordon, Tandeca; Miller, Assia

2016-01-01

African American women have among the highest HIV/AIDS and hepatitis B and C incidence rates in the United States, especially among those homeless or incarcerated. The objective of this study was to evaluate the Health Enlightenment, Awareness and Living Intervention, designed to decrease HIV/AIDS, hepatitis and related risky behaviors. The thirteen-session intervention was implemented among homeless and formerly incarcerated low-income African American women, ages 18 to 55, in Atlanta, Georgia from 2006 to 2010. A single group repeated measures study design was employed and consisted of a pre-test (n = 355) group, an immediate post-test (n = 228) group with a response rate of 64%, and a six-month follow up (n = 110) group with response rate of 48%, completing a 135-item survey. Paired-sample t-tests, McNemar tests, and repeated measures ANOVA were applied to compare survey results. Participants demonstrated statistically significant increases in hepatitis B and C knowledge over time (p < 0.001). Statistically significant decreases were also reported for unprotected sex in exchange for money, drugs or shelter (p = 0.008), and sex under the influence of drugs or alcohol (p < 0.001). Reported substance use decreased with statistical significance for alcohol (p = 0.011), marijuana (p = 0.011), illegal drugs (p = 0.002), and crack/cocaine (p = 0.003). Findings broaden the evidence base related to the effectiveness of HIV/AIDS and hepatitis risk reduction interventions designed for homeless and previously incarcerated African American women. PMID:27669284

Variability in structure of university pulmonary/critical care fellowships and retention of fellows in academic medicine.

PubMed

Nadig, Nandita R; Vanderbilt, Allison A; Ford, Dee W; Schnapp, Lynn M; Pastis, Nicholas J

2015-04-01

Individual fellowship programs are challenged to find a format of training that not only meets the Accreditation Council for Graduate Medical Education requirements, but also grooms fellows to be trusted clinicians, and encourages them to enter academic careers. This study was undertaken as part of an internal effort to evaluate and revise the program structure of the pulmonary/critical care medicine fellowship at the Medical University of South Carolina. Our objectives were to characterize variation in the training structure and specifically research opportunities of university pulmonary/critical care medicine fellowship programs, and to identify factors associated with fellow retention in academic medicine and research. A 30-item survey was developed through rigorous internal review and was administered via email. Descriptive statistics, Cronbach's alpha, correlations, Wilcoxon sign-rank test, and ANOVA were carried out. We had a response rate of 52%. Program directors reported that, within the past 5 years, 38% of their fellows remained in academic medicine and 20% remained in academics with significant research focus. We found a statistically significant association between obtaining a master's degree and remaining in academics (r = 0.559; P < 0.008). The survey also revealed statistically significant relationships between scholarly requirements (grant proposals, peer-reviewed original research projects) and the percent of fellows who graduated and remained in academics. This survey offers some insights that may be useful to fellowship program directors. In particular, advanced education in research and maximizing scholarly activities might be associated with increased academic retention among fellowship trainees.

Fracture resistance of aluminium oxide and lithium disilicate-based crowns using different luting cements: an in vitro study.

PubMed

Al-Wahadni, Ahed M; Hussey, David L; Grey, Nicholas; Hatamleh, Muhanad M

2009-03-01

The aim of this study was to investigate the fracture resistance of two types of ceramic crowns cemented with two different cements. Forty premolar crowns were fabricated using lithium-disilicate (IPS Empress-2) and glass-infiltrated aluminium-oxide (In-Ceram) ceramic systems. The crowns were divided into four groups (n=10) with Group 1 (IPS Empress-2) and Group 2 (In-Ceram) cemented with glass ionomer cement. Group 3 (IPS Empress-2) and Group 4 (In-Ceram) were cemented with resin cement. Crowns were tested in a universal testing machine at a compressive-load speed of 10 mm/min. Fracture modes were grouped into five categories. One way analysis of variance (ANOVA) and Bonferroni post-hoc tests were used to detect statistical significances (p<0.05). The mean (SD) fracture resistance (Newtons) for Groups 1 to 4 were: 245.35 (82.69), 390.48 (67.03), 269.69 (10.33), and 418.36 (26.24). The cement type had no statistical significant effect (p>0.05) on fracture resistance within each ceramic system tested. In-Ceram crowns cemented with either glass ionomer or resin cements exhibited a statistically significantly higher fracture-resistance than IPS Empress-2 crowns (p<0.05). Minimal fracture in the test crowns was the common mode exhibited. Fracture resistance of IPS Empress-2 and In-Ceram crowns was not affected by the type of cement used for luting. Both In-Ceram and IPS Empress-2 crowns can be successfully luted with the cements tested with In-Ceram exhibiting higher fracture resistance than IPS Empress-2.

Cold plasma technology: bactericidal effects on Geobacillus stearothermophilus and Bacillus cereus microorganisms.

PubMed

Morris, Angela D; McCombs, Gayle B; Akan, Tamer; Hynes, Wayne; Laroussi, Mounir; Tolle, Susan L

2009-01-01

Cold plasma, also known as Low Temperature Atmospheric Pressure Plasma (LTAPP) is a novel technology consisting of neutral and charged particles, including free radicals, which can be used to destroy or inactivate microorganisms. Research has been conducted regarding the effect of cold plasma on gram-positive bacteria; however, there is limited research regarding its ability to inactivate the spore-formers Geobacillus stearothermophilus and Bacillus cereus. The purpose of this study was to determine if cold plasma inactivates G. stearothermophilus and B. cereus vegetative cells and spores. Nine hundred eighty-one samples were included in this study (762 experimental and 219 controls). Experimental samples were exposed indirectly or directly to cold plasma, before plating and incubating for 16 hours. Control samples were not exposed to cold plasma. The percentage-kill and cell number reductions were calculated from Colony Forming Units (CFU). Data were statistically analyzed at the .05 level using one-way ANOVA, Kruskal Wallis and Tukey's tests. There was a statistically significant difference in the inactivation of G. stearothermophilus vegetative cells receiving indirect and direct exposure (p=0.0001 and p=0.0013, respectively), as well as for B. cereus vegetative cells and spores (p=0.0001 for direct and indirect). There was no statistically significant difference in the inactivation of G. stearothermophilus spores receiving indirect exposure (p=0.7208) or direct exposure (p=0.0835). Results demonstrate that cold plasma exposure effectively kills G. stearothermophilus vegetative cells and B. cereus vegetative cells and spores; however, G. stearothermophilus spores were not significantly inactivated.

Comparison of the compressive strength of 3 different implant design systems.

PubMed

Pedroza, Jose E; Torrealba, Ysidora; Elias, Augusto; Psoter, Walter

2007-01-01

The aims of this study were twofold: to compare the static compressive strength at the implant-abutment interface of 3 design systems and to describe the implant abutment connection failure mode. A stainless steel holding device was designed to align the implants at 30 degrees with respect to the y-axis. Sixty-nine specimens were used, 23 for each system. A computer-controlled universal testing machine (MTS 810) applied static compression loading by a unidirectional vertical piston until failure. Specimens were evaluated macroscopically for longitudinal displacement, abutment looseness, and screw and implant fracture. Data were analyzed by analysis of variance (ANOVA). The mean compressive strength for the Unipost system was 392.5 psi (SD +/-40.9), for the Spline system 342.8 psi (SD+/-25.8), and for the Screw-Vent system 269.1 psi (SD+/-30.7). The Unipost implant-abutment connection demonstrated a statistically significant superior mechanical stability (P < or = .009) compared with the Spline implant system. The Spline implant system showed a statistically significant higher compressive strength than the Screw-Vent implant system (P < or =.009). Regarding failure mode, the Unipost system consistently broke at the same site, while the other systems failed at different points of the connection. The Unipost system demonstrated excellent fracture resistance to compressive forces; this resistance may be attributed primarily to the diameter of the abutment screw and the 2.5 mm counter bore, representing the same and a unique piece of the implant. The Unipost implant system demonstrated a statistically significant superior compressive strength value compared with the Spline and Screw-Vent systems, at a 30 degrees angulation.

Measurement Consistency from Magnetic Resonance Images

PubMed Central

Chung, Dongjun; Chung, Moo K.; Durtschi, Reid B.; Lindell, R. Gentry; Vorperian, Houri K.

2010-01-01

Rationale and Objectives In quantifying medical images, length-based measurements are still obtained manually. Due to possible human error, a measurement protocol is required to guarantee the consistency of measurements. In this paper, we review various statistical techniques that can be used in determining measurement consistency. The focus is on detecting a possible measurement bias and determining the robustness of the procedures to outliers. Materials and Methods We review correlation analysis, linear regression, Bland-Altman method, paired t-test, and analysis of variance (ANOVA). These techniques were applied to measurements, obtained by two raters, of head and neck structures from magnetic resonance images (MRI). Results The correlation analysis and the linear regression were shown to be insufficient for detecting measurement inconsistency. They are also very sensitive to outliers. The widely used Bland-Altman method is a visualization technique so it lacks the numerical quantification. The paired t-test tends to be sensitive to small measurement bias. On the other hand, ANOVA performs well even under small measurement bias. Conclusion In almost all cases, using only one method is insufficient and it is recommended to use several methods simultaneously. In general, ANOVA performs the best. PMID:18790405

Sex, age and caste differences in somatotypes of Rajput and scheduled caste adolescents from the Sirmour District of Himachal Pradesh, India.

PubMed

Gaur, Rajan; Maurya, Madhuri; Kang, Payal Singh

2008-03-01

Somatotypes of a cross-sectional sample of 544 rural adolescents ranging in age from 11 to 17 years are described. The sample included 269 Rajput (141 girls and 128 boys) and 275 Scheduled Caste (135 girls and 140 boys) subjects. Each subject was somatotyped using the Heath-Carter anthropometric somatotype protocol (Carter & Heath 1990). In all, ten anthropometric measurements namely height, weight, bicondylar diameters of humerus and femur, flexed mid-upper-arm and calf circumferences, and triceps, subscapular, supraspinale and calf skinfolds were taken. The mean somatotypes of the Rajput boys and girls were 1.62- 3.30-3.85 (mesomorphic-ectomorph) and 2.42-2.90-3.99 (balanced ectomorph), respectively. The mean somatotypes of the Scheduled Caste subjects were 1.51-3.02-3.74 (mesomorphic-ectomorph) for boys and 2.38-2.64-3.70 (balanced ectomorph) for girls. A one-way ANOVA revealed that females of both the caste groups were significantly (p < or = 0.05) more endomorphic than the males. The sex differences in other two components were not significant (p +/- 0.05). Caste differences, as revealed by a one-way ANOVA analysis, were not significant (p +/- 0.05) in both sexes. With the exception of the Rajput girls, the differences in whole somatotypes between those in an early phase of adolescence and those in an advanced phase of adolescence were not significant (p = 0.05). The results indicate that populations exposed to same environmental situations for a long period of time tend to show similarity in physique. A one-way MANOVA analysis, which used Wilk's Lambda as test statistics, revealed that from 11-17 years there was no significant change (p < or = 0.05) in component dominance of mean somatotypes in the boys and girls of the present sample. Among males of a majority of the Indian populations, ectomorphy dominates over endomorphy and mesomorphy from 11 to 17 years.

TOXICITY TESTING OF RESTORATIVE DENTAL MATERIALS USING BRINE SHRIMP LARVAE (ARTEMIA SALINA)

PubMed Central

Milhem, Manar M.; Al-Hiyasat, Ahmad S.; Darmani, Homa

2008-01-01

This study investigated the effect of extracts of different composites, glass ionomer cement (GIC)s and compomers on the viability of brine shrimp larvae. Ethanolic extracts of four dental composites (Z-100; Solitaire 2; Filtek P60 and Synergy), a conventional GIC (Ketac-Fil), a resin-modified glass ionomer cement (Vitremer), two compomers (F2000; Dyract AP), and a flowable compomer (Dyract Flow) were prepared from each material. Following evaporation of the ethanol, the extracts were resuspended in distilled water, which was then used to test the effects on the viability of brine shrimp larvae. For the composites, the extract of Synergy was the least toxic (88% viability) followed by the extracts of Solitaire 2, Z100 and P60 (75%, 67.5% and 50% viability, respectively). One-way ANOVA revealed highly significant differences between the resin composite materials (p<0.001). Follow-up comparison between the composite groups by Tukey's pairwise multiple-comparison test (α =0.05) showed that the extract of Synergy was significantly less toxic than the extracts of all the other materials except that of Solitaire 2. The compomers showed 100% lethality, while the percentage of viable larvae for the extracts of Ketac-Fil, and Vitremer were 32.3%, and 37.0%, respectively. One-way ANOVA revealed highly significant differences between the groups of materials (p<0.001). Follow-up comparison between the groups by Tukey's test (α = 0.05) showed that the toxic effect of the extracts of the compomers were significantly greater than that of Ketac-Fil, and Vitremer. The differences in the toxic effects of Vitremer and Ketac-Fil were not statistically significant. In conclusion, the toxicity of composite materials varied according to their chemical composition. Compomers were the most lethal materials to brine shrimp larvae followed by GICs and then composites. PMID:19089264

Degree of cure and fracture properties of experimental acid-resin modified composites under wet and dry conditions

PubMed Central

López-Suevos, Francisco; Dickens, Sabine H.

2008-01-01

Objective Evaluate the effects of core structure and storage conditions on the mechanical properties of acid-resin modified composites and a control material by three-point bending and conversion measurements 15 min and 24 h after curing. Methods The monomers pyromellitic dimethacrylate (PMDM), biphenyldicarboxylic-acid dimethacrylate (BPDM), (isopropylidene-diphenoxy)bis(phthalic-acid) dimethacrylate (IPDM), oxydiphthalic-acid dimethacrylate (ODPDM), and Bis-GMA were mixed with triethyleneglycol dimethacrylate (TEGDMA) in a 40/60 molar ratio, and photo-activated. Composite bars (Barium-oxide-glass/resin = 3/1 mass ratio, (2 × 2 × 25) mm, n = 5) were light-cured for 1 min per side. Flexural strength (FS), elastic modulus (E), and work-of-fracture (WoF) were determined in three-point bending after 15 min (stored dry); and after 24 h under dry and wet storage conditions at 37 °C. Corresponding degrees of conversion (DC) were evaluated by Fourier transform infrared spectroscopy. Data was statistically analyzed (2-way analysis of variance, ANOVA, Holm-Sidak, p < 0.05). Results Post-curing significantly increased FS, E and DC in nearly all cases. WoF did not change, or even decreased with time. For all properties ANOVA found significant differences and interactions of time and material. Wet storage reduced the moduli and the other properties measured with the exception of FS and WoF of ODPDM; DC only decreased in BPDM and IPDM composites. Significance Differences in core structure resulted in significantly different physical properties of the composites studied with two phenyl rings connected by one ether linkage as in ODPDM having superior FS, WoF and DC especially after 24 h under wet conditions. As expected, post-curing significantly contributed to the final mechanical properties of the composites, while wet storage generally reduced the mechanical properties. PMID:17980422

Marginal accuracy of computer-aided design- and computer-aided manufacturing-fabricated full-arch zirconia restoration.

PubMed

Juntavee, Niwut; Sirisathit, Issarawas

2018-01-01

This study evaluated marginal accuracy of full-arch zirconia restoration fabricated from two digital computer-aided design and computer-aided manufacturing (CAD-CAM) systems (Trios-3 and CS3500) in comparison to conventional cast metal restoration. A stainless steel model comprising two canine and two molar abutments was used as a master model for full-arch reconstruction. The canine and molar abutments were machined in a cylindrical shape with 5° taper and chamfer margin. The CAD-CAM systems based on the digital approach were used to construct the full-arch zirconia restoration. The conventional cast metal restoration was fabricated according to a conventional lost-wax technique using nickel-chromium alloys. Ten restorations were fabricated from each system. The marginal accuracy of each restoration was determined at four locations for each abutment. An analysis of variance (ANOVA) and Tukey's honest significant difference (HSD) multiple comparisons were used to determine statistically significant difference at 95% confidence interval. The mean values of marginal accuracy of restorations fabricated from conventional casting, Trios-3, and CS3500 were 48.59±4.16 μm, 53.50±5.66 μm, and 56.47±5.52 μm, respectively. ANOVA indicated significant difference in marginal fit of restorations among various systems. The marginal discrepancy of zirconia restoration fabricated from the CS3500 system demonstrated significantly larger gap than that fabricated from the 3Shape system ( p <0.05). Tukey's HSD multiple comparisons indicated that the zirconia restoration fabricated from either CS3500 or Trios-3 demonstrated a significantly larger marginal gap than the conventional cast metal restoration ( p <0.05). Full-arch zirconia restoration fabricated from the Trios-3 illustrated better marginal fits than that from the CS3500, although, both were slightly less accurate than the conventional cast restoration. However, the marginal discrepancies of restoration produced by both CAD-CAM systems were within the clinically acceptable range and satisfactorily precise to be suggested for construction full-arch zirconia restoration.

Increasing age in Achilles rupture patients over time.

PubMed

Ho, Gavin; Tantigate, Direk; Kirschenbaum, Josh; Greisberg, Justin K; Vosseller, J Turner

2017-07-01

The changing demographics of Achilles tendon rupture (ATR) patients have not fully been investigated. However, there has been a general suspicion that this injury is occurring in an increasingly older population, in terms of mean age. The aim of this study was to objectively show an increase in age in Achilles tendon rupture patients over time. Published literature on Achilles tendon ruptures was searched for descriptive statistics on the demographics of patients in the studies, specifically mean and median age of Achilles tendon rupture patients, gender ratio, percentage of athletics-related injuries, percentage of smokers, and BMI. Linear regression analyses were performed to determine the trend of patient demographics over time. A Welch one-way ANOVA was carried out to identify any possible differences in data obtained from different types of studies. The patient demographics from 142 studies were recorded, with all ATR injuries occurring between the years 1953 and 2014. There was no significant difference in the mean age data reported by varying study types, i.e. randomized controlled trial, cohort study, case series, etc. (P=0.182). There was a statistically significant rise in mean age of ATR patients over time (P<0.0005). There was also a statistically significant drop in percentage of male ATR patients (P=0.02). There is no significant trend for percentage of athletics-related injuries, smoking or BMI. Since 1953 to present day, the mean age at which ATR occurs has been increasing by at least 0.721 years every five years. In the same time period, the percentage of female study patients with ATR injuries has also been increasing by at least 0.6% every five years. Level III; Retrospective cohort study. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparing Burnout Across Emergency Physicians, Nurses, Technicians, and Health Information Technicians Working for the Same Organization.

PubMed

Schooley, Benjamin; Hikmet, Neset; Tarcan, Menderes; Yorgancioglu, Gamze

2016-03-01

Studies on the topic of burnout measure the effects of emotional exhaustion (EE), depersonalization (DP) (negative or cynical attitudes toward work), and reduced sense of personal accomplishment (PA). While the prevalence of burnout in practicing emergency medicine (EM) professionals has been studied, little is known of the prevalence and factors across physicians, nurses, technicians, and health information technicians working for the same institution. The aim of this study was to assess burnout differences across EM professional types.The total population of 250 EM professionals at 2 public urban hospitals in Turkey were surveyed using the Maslach Burnout Inventory and basic social- and work-related demographics. Descriptive statistics, ANOVA, and additional post hoc tests were computed.Findings show that EE and DP scores were high across all occupational groups, while scores on PA were low. There was a statistically significant difference between nurses and medical technicians (P < 0.05) for EE; and between physicians and both nurses and medical technicians (P < 0.05) for PA; while no group differences were found for DP. Age, gender, economic well-being, and income level were all significant; while patient load and marital status showed no significance.Burnout can be high across occupational groups in the emergency department. Burnout is important for EM administrators to assess across human resources. Statistically significant differences across socio-demographic groups vary across occupational groups. However, differences between occupational groups may not be explained effectively by the demographic factors assessed in this or other prior studies. Rather, the factors associated with burnout are incomplete and require further institutional, cultural, and organizational analyses including differentiating between job tasks carried out by each EM job type.

Comparing Burnout Across Emergency Physicians, Nurses, Technicians, and Health Information Technicians Working for the Same Organization

PubMed Central

Schooley, Benjamin; Hikmet, Neset; Tarcan, Menderes; Yorgancioglu, Gamze

2016-01-01

Abstract Studies on the topic of burnout measure the effects of emotional exhaustion (EE), depersonalization (DP) (negative or cynical attitudes toward work), and reduced sense of personal accomplishment (PA). While the prevalence of burnout in practicing emergency medicine (EM) professionals has been studied, little is known of the prevalence and factors across physicians, nurses, technicians, and health information technicians working for the same institution. The aim of this study was to assess burnout differences across EM professional types. The total population of 250 EM professionals at 2 public urban hospitals in Turkey were surveyed using the Maslach Burnout Inventory and basic social- and work-related demographics. Descriptive statistics, ANOVA, and additional post hoc tests were computed. Findings show that EE and DP scores were high across all occupational groups, while scores on PA were low. There was a statistically significant difference between nurses and medical technicians (P < 0.05) for EE; and between physicians and both nurses and medical technicians (P < 0.05) for PA; while no group differences were found for DP. Age, gender, economic well-being, and income level were all significant; while patient load and marital status showed no significance. Burnout can be high across occupational groups in the emergency department. Burnout is important for EM administrators to assess across human resources. Statistically significant differences across socio-demographic groups vary across occupational groups. However, differences between occupational groups may not be explained effectively by the demographic factors assessed in this or other prior studies. Rather, the factors associated with burnout are incomplete and require further institutional, cultural, and organizational analyses including differentiating between job tasks carried out by each EM job type. PMID:26962780

Effect of storage in artificial saliva and thermal cycling on Knoop hardness of resin denture teeth.

PubMed

Assunção, Wirley Gonçalves; Gomes, Erica Alves; Barão, Valentim Adelino Ricardo; Barbosa, Débora Barros; Delben, Juliana Aparecida; Tabata, Lucas Fernando

2010-07-01

This study aimed to evaluate the effect of different storage periods in artificial saliva and thermal cycling on Knoop hardness of 8 commercial brands of resin denture teeth. Eigth different brands of resin denture teeth were evaluated (Artplus group, Biolux group, Biotone IPN group, Myerson group, SR Orthosit group, Trilux group, Trubyte Biotone group, and Vipi Dent Plus group). Twenty-four teeth of each brand had their occlusal surfaces ground flat and were embedded in autopolymerized acrylic resin. After polishing, the teeth were submitted to different conditions: (1) immersion in distilled water at 37+/-2 degrees C for 48+/-2h (control); (2) storage in artificial saliva at 37+/-2 degrees C for 15, 30 and 60 days, and (3) thermal cycling between 5 and 55 degrees C with 30-s dwell times for 5000 cycles. Knoop hardness test was performed after each condition. Data were analyzed with two-way ANOVA and Tukey's test (alpha=.05). In general, SR Orthosit group presented the highest statistically significant Knoop hardness value while Myerson group exhibited the smallest statistically significant mean (P<.05) in the control period, after thermal cycling, and after all storage periods. The Knoop hardness means obtained before thermal cycling procedure (20.34+/-4.45 KHN) were statistically higher than those reached after thermal cycling (19.77+/-4.13 KHN). All brands of resin denture teeth were significantly softened after storage period in artificial saliva. Storage in saliva and thermal cycling significantly reduced the Knoop hardness of the resin denture teeth. SR Orthosit denture teeth showed the highest Knoop hardness values regardless the condition tested. Copyright 2010 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Bonding of fibre-reinforced composite post to root canal dentin.

PubMed

Bell, Anna-Maria Le; Lassila, Lippo V J; Kangasniemi, Ilkka; Vallittu, Pekka K

2005-08-01

The aim of this study was to determine bonding properties of two types of fibre-reinforced composite (FRC) posts cemented into root canals of molars. Serrated titanium posts served as reference. Prefabricated carbon/graphite FRC posts with cross-linked polymer matrix and individually formed glass FRC posts with interpenetrating polymer network (IPN) polymer matrix were compared. The crowns of extracted third molars were removed and post space (diameter: 1.5mm) was drilled, etched and bonded. The posts were treated with dimethacrylate adhesive resin, light-polymerized and cemented with a dual-polymerizing composite resin luting cement. After thermocycling (6000x) the samples were cut into discs of thicknesses: 1, 2 and 4mm (n=12/group). Push-out force was measured by pushing the post from one end. Assessment of failure mode was made under a stereomicroscope (1, adhesive failure between post and cement; 2, cohesive failure of post-system; 3, adhesive failure between cement and dentin). The push-out force increased with increased height of dentin disc in all groups (ANOVA, p<0.001). In the 4mm thick dentin discs the individually formed glass FRC posts showed highest push-out force and the difference to that of the titanium posts was significant (ANOVA, p<0.001). The other differences were not statistically significant. None of the individually formed glass FRC posts showed adhesive failures between the post and the cement. Contrary to the other posts, there were no adhesive (post-cement) failures with the individually formed glass FRC posts, suggesting better interfacial adhesion of cement to these posts.

Who pays for the health benefits of exclusive breastfeeding? An analysis of maternal time costs.

PubMed

Smith, J P; Forrester, Robert

2013-11-01

The benefits of exclusive breastfeeding, including public health cost savings, are widely recognized, but breastfeeding requires maternal time investments. This study investigates the time taken to exclusively breastfeed at 6 months compared with not exclusively breastfeeding. Time use data were examined from an Australian survey of new mothers conducted during 2005-2006. Data from 139 mothers with infants age 6 months were analyzed using chi-square tests of independence to examine socioeconomic and demographic characteristics and 2-sided t tests to compare average weekly hours spent on milk feeding, feeding solids, preparing feeds, and the total of these. The comparison was of exclusively breastfeeding mothers with other mothers. We also compared exclusively breastfeeding with partially breastfeeding and formula feeding mothers using a 1-way between-groups analysis of variance (ANOVA). The exclusively breastfeeding (vs other) mothers spent 7 hours extra weekly on milk feeding their infants but 2 hours less feeding solids. These differences were statistically significant. ANOVA revealed significant differences between exclusively breastfeeding mothers, breastfeeding mothers who had introduced solids, and mothers who fed any formula, in time spent feeding milk, and solids, and preparing feeds. Exclusive breastfeeding is time intensive, which is economically costly to women. This may contribute to premature weaning for women who are time-stressed, lack household help from family, or cannot afford paid help. Gaining public health benefits of exclusive breastfeeding requires strategies to share maternal lactation costs more widely, such as additional help with housework or caring for children, enhanced leave, and workplace lactation breaks and suitable child care.

Effects of carprofen on renal function and results of serum biochemical and hematologic analyses in anesthetized dogs that had low blood pressure during anesthesia.

PubMed

Boström, Ingrid M; Nyman, Görel C; Lord, Peter E; Häggström, Jens; Jones, Bernt E V; Bohlin, Henrik P

2002-05-01

To investigate effects of IV administered carprofen on indices of renal function and results of serum biochemical and hematologic analyses in dogs anesthetized with acepromazine-thiopentone-isoflurane that had low blood pressure during anesthesia. 6 healthy Beagles. A randomized crossover study was conducted, using the following treatments: saline (0.9% NaCl solution)-saline, saline-carprofen, and carprofen-saline. Saline (0.08 ml/kg) and carprofen (4 mg/kg) were administered IV. The first treatment was administered 30 minutes before induction of anesthesia and immediately before administration of acepromazine (0.1 mg/kg, IM). Anesthesia was induced with thiopentone (25 mg/ml, IV) and maintained with inspired isoflurane (2% in oxygen). The second treatment was administered 30 minutes after onset of inhalation anesthesia. Blood gases, circulation, and ventilation were monitored. Renal function was assessed by glomerular filtration rate (GFR), using scintigraphy, serum biochemical analyses, and urinalysis. Hematologic analysis was performed. Statistical analysis was conducted, using ANOVA or Friedman ANOVA. Values did not differ significantly among the 3 treatments. For all treatments, sedation and anesthesia caused changes in results of serum biochemical and hematologic analyses, a decrease in mean arterial blood pressure to 65 mm Hg, an increase of 115 pmol/L in angiotensin II concentration, and an increase of 100 seconds in time required to reach maximum activity counts during scintigraphy. Carprofen administered IV before or during anesthesia did not cause detectable significant adverse effects on renal function or results of serum biochemical and hematologic analyses in healthy Beagles with low blood pressure during anesthesia.

A thermographic study on eyes affected by Age-related Macular Degeneration: Comparison among various forms of the pathology and analysis of risk factors

NASA Astrophysics Data System (ADS)

Matteoli, Sara; Finocchio, Lucia; Biagini, Ilaria; Giacomelli, Giovanni; Sodi, Andrea; Corvi, Andrea; Virgili, Gianni; Rizzo, Stanislao

2016-05-01

The aims of this study are to investigate (1) the ocular thermographic profiles in eyes affected by Age related Macular Degeneration (AMD) and age-matched controls to detect possible hemodynamic abnormalities that could be involved in the pathogenesis of the disease, (2) whether any risk factors associated with the disease could affect the development of a form of AMD rather than another. Thirty-four eyes with Age-Related Maculopathy (ARM), 41 eyes with dry AMD, 60 eyes affected by wet AMD, and 74 eyes with fibrotic AMD were included in the study. The control group consisted of 48 healthy eyes. Exclusion criteria were represented by any other ocular diseases other than AMD, tear film abnormalities, systemic cardiovascular abnormalities, systemic diseases and a body temperature higher than 37.5 °C. A total of 210 eyes without pupil dilation were investigated by infrared thermography (FLIR A320). The Ocular Surface Temperature (OST) of five ocular areas was calculated by means of an image processing technique from the infrared images. Two-sample t-test, one-way ANOVA test and multivariate analysis were used for statistical analyses. ANOVA analyses showed no significant differences among AMD groups (P-value > 0.05), however, OST in AMD patients was significantly lower than in controls (P-value < 0.0001). Smokers showed higher possibility (P-value = 0.012) of developing wet AMD instead of dry AMD. Infrared thermography may be a helpful, non-invasive and not time-consuming method to be used in the management of patients with this common degenerative maculopathy.

Population differences in the postcrania of modern South Africans and the implications for ancestry estimation.

PubMed

Liebenberg, Leandi; L'Abbé, Ericka N; Stull, Kyra E

2015-12-01

The cranium is widely recognized as the most important skeletal element to use when evaluating population differences and estimating ancestry. However, the cranium is not always intact or available for analysis, which emphasizes the need for postcranial alternatives. The purpose of this study was to quantify postcraniometric differences among South Africans that can be used to estimate ancestry. Thirty-nine standard measurements from 11 postcranial bones were collected from 360 modern black, white and coloured South Africans; the sex and ancestry distribution were equal. Group differences were explored with analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD) test. Linear and flexible discriminant analysis (LDA and FDA, respectively) were conducted with bone models as well as numerous multivariate subsets to identify the model and method that yielded the highest correct classifications. Leave-one-out (LDA) and k-fold (k=10; FDA) cross-validation with equal priors were used for all models. ANOVA and Tukey's HSD results reveal statistically significant differences between at least two of the three groups for the majority of the variables, with varying degrees of group overlap. Bone models, which consisted of all measurements per bone, resulted in low accuracies that ranged from 46% to 63% (LDA) and 41% to 66% (FDA). In contrast, the multivariate subsets, which consisted of different variable combinations from all elements, achieved accuracies as high as 85% (LDA) and 87% (FDA). Thus, when using a multivariate approach, the postcranial skeleton can distinguish among three modern South African groups with high accuracy. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Effect of training pediatricians and family physicians in early childhood caries prevention.

PubMed

Herndon, Jill Boylston; Tomar, Scott L; Catalanotto, Frank A

2015-04-01

To analyze the effect of postresidency early childhood caries prevention training on physicians' oral health knowledge, confidence, and practice patterns and to identify variations by type of training. We conducted pre- and post-training surveys of pediatricians and family physicians in Florida. Paired t test and repeated-measures ANOVA analyses were used to compare physicians with no oral health training, those with applied in-office training, and those with another type of training on 5 composite measures: fluoride knowledge, nonfluoride oral health knowledge, confidence in advising parents, confidence in conducting oral health screening and caries risk assessment, and frequency in performing recommended oral health practices. The final sample included 229 physicians (162 pediatricians and 67 family physicians). The interaction in the repeated-measures ANOVA between group (training category) and time (pre- and post-training) was significant for the nonfluoride knowledge [F(2, 225) = 4.1, P = .02] and confidence in screening [F(2, 224) = 4.1, P = .02] composite measures, lending support for a positive treatment effect of training on these domains. Greater gains were observed among physicians with in-office training compared with those who received another type of training. A statistically significant treatment effect on oral health practices was not detected. Efforts to engage physicians in oral health training and to incorporate applied components in training curricula may improve physicians' oral health knowledge and increase their confidence in conducting oral health screenings and caries risk assessments. Additional research is needed to evaluate the relative costs and benefits of different training modalities on specific oral health practices. Copyright © 2015 Elsevier Inc. All rights reserved.

The effect of hydrogen peroxide concentration on metal ion release from dental casting alloys.

PubMed

Al-Salehi, S K; Hatton, P V; Johnson, A; Cox, A G; McLeod, C

2008-04-01

There are concerns that tooth bleaching agents may adversely affect dental materials. The aim of this study was to test the hypothesis that increasing concentrations of hydrogen peroxide (HP) are more effective than water at increasing metal ion release from two typical dental casting alloys during bleaching. Discs (n = 28 for each alloy) were prepared by casting and heat treated to simulate a typical porcelain-firing cycle. Discs (n = 7) of each alloy were immersed in either 0%, 3%, 10% or 30% (w/v) HP solutions for 24 h at 37 degrees C. Samples were taken for metal ion release determination using inductively coupled plasma-mass spectrometry and the data analysed using a two-way anova followed by a one-way anova. The surface roughness of each disc was measured using a Talysurf contact profilometer before and after bleaching and the data analysed using a paired t-test. With the exception of gold, the differences in metal ion concentration after treatment with 0% (control) and each of 3%, 10% and 30% HP (w/v) were statistically significant (P < 0.05). Metal ion release from the two alloys increased with increasing HP concentrations (over 3000% increase in Ni and 1400% increase in Pd ions were recorded when HP concentration increased from 0% to 30%). Surface roughness values of the samples before and after bleaching were not significantly different (P > 0.05) Exposure of the two dental casting alloys to HP solutions increased metal ion release of all the elements except gold.

The effect of zinc oxide nanoparticles deposition for friction reduction on orthodontic wires

PubMed Central

Kachoei, Mojghan; Eskandarinejad, Faranak; Divband, Baharak; Khatamian, Masumeh

2013-01-01

Background: In the sliding technique, the reduced frictional forces are associated with rapid tooth movements and better control of the anchorage. Recently, wire coating with different nanoparticles has been proposed to decrease frictional forces. This in vitro study was carried out to coat stainless steel (SS) wires with zinc oxide (ZnO) nanoparticles in order to determine the effect of this coating on friction between wires and orthodontic brackets. Materials and Methods: Eighty 0.016 inch and 0.019 inch × 0.025 inch SS wires with and without ZnO nanoparticles were used in 80 orthodontic brackets (0.018 and 0.022 systems). The coated wires were analyzed by SEM and X-Ray diffraction (XRD) observations. Kinetic friction between the wires and orthodontic brackets were calculated using a universal testing machine. Frictional forces were statistically analyzed using three-way ANOVA, one-way ANOVA, Student's t-test and Tukey multiple comparison tests. Results: Coating with ZnO nanoparticles significantly influenced frictional force values (P < 0.0001). In 0.019 inch × 0.025 inch wires, the frictional forces were 1.6912 ± 0.18868 and 3.4485 ± 0.32389 N in the coated and uncoated wires respectively, (51% reductions). In the 0.016 inch wires, the friction values were estimated to be 1.5668 ± 0.10703 and 2.56 ± 0.34008 N in the coated and uncoated conditions, respectively, (39% reductions). Conclusion: Due to the positive effects of ZnO nanoparticle coating on decreasing frictional forces, these nanoparticles might offer a novel opportunity to significantly reduce friction during tooth movement. PMID:24130586

Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran

PubMed Central

Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

2016-01-01

Objectives: This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. Method: A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. Results: The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Conclusion: Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs. PMID:27010083