49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

Transfer characteristics of optical profilers with respect to rectangular edge and step height measurement

NASA Astrophysics Data System (ADS)

Xie, Weichang; Hagemeier, Sebastian; Bischoff, Jörg; Mastylo, Rostyslav; Manske, Eberhard; Lehmann, Peter

2017-06-01

Optical profilers are mature instruments used in research and industry to study surface topography features. Although the corresponding standards are based on simple step height measurements, in practical applications these instruments are often used to study the fidelity of surface topography. In this context it is well-known that in certain situations a surface profile obtained by an optical profiler will differ from the real profile. With respect to practical applications such deviations often occur in the vicinity of steep walls and in cases of high aspect ratio. In this contribution we compare the transfer characteristics of different 3D optical profiler principles, namely white-light interferometry, focus sensing, and confocal microscopy. Experimental results demonstrate that the transfer characteristics do not only depend on the parameters of the optical measurement system (e. g. wavelength and coherence of light, numerical aperture, evaluated signal feature, polarization) but also on the properties of the measuring object such as step height, aspect ratio, material properties and homogeneity, rounding and steepness of the edges, surface roughness. As a result, typical artefacts such as batwings occur for certain parameter combinations, particularly at certain height-to-wavelength ratio (HWR) values. Understanding of the mechanisms behind these phenomena enables to reduce them by an appropriate parameter adaption. However, it is not only the edge artefacts, but also the position of an edge that may be changed due to the properties of the measuring object. In order to investigate the relevant effects theoretically, several models are introduced. These are based on either an extension of Richards-Wolf modeling or rigorous coupled wave analysis (RCWA). Although these models explain the experimental effects quite well they suffer from different limitations, so that a quantitative correspondence of theoretical modeling and experimental results is hard to achieve. Nevertheless, these models are used to study the characteristics of the measured signals occurring at edges of different step height compared to signals occurring at plateaus. Moreover, a special calibration sample with continuous step height variation was developed to reduce the impact of unknown sample properties. We analyzed the signals in both, the spatial and the spatial frequency domain, and found systematic signal changes that will be discussed. As a consequence, these simulations will help to interpret measurement results appropriately and to improve them by proper parameter settings and calibration and finally to increase the edge detection accuracy.

Step-feed biofiltration: a low cost alternative configuration for off-gas treatment.

PubMed

Estrada, José M; Quijano, Guillermo; Lebrero, Raquel; Muñoz, Raúl

2013-09-01

Clogging due to biomass accumulation and the loss of structural stability of the packing media are common operational drawbacks of standard gas biofiltration inherent to the traditional biofilter design, which result in prohibitive pressure drop buildups and media channeling. In this work, an innovative step-feed biofilter configuration, with the air emission supplied in either two or three locations along the biofilter height, was tested and compared with a standard biofilter using toluene as a model pollutant and two packing materials: compost and perlite. When using compost, the step-feed biofilter supported similar elimination capacities (EC ≈ 80 g m(-3) h(-1)) and CO2 production rates (200 g m(-3) h(-1)) to those achieved in the standard biofilter. However, while the pressure drop in the step-feed system remained below 300 Pa m bed(-1) for 61 days, the standard biofilter reached this value in only 14 days and 4000 Pa m bed(-1) by day 30, consuming 75% more compression energy throughout the entire operational period. Operation with perlite supported lower ECs compared to compost in both the step-feed and standard biofilters (≈ 30 g m(-3) h(-1)), probably due to the high indigenous microbial diversity present in this organic packing material. The step-feed biofilter exhibited 65% lower compression energy requirements than the standard biofilter during operation with perlite, while supporting similar ECs. In brief, step-feed biofiltration constitutes a promising operational strategy capable of drastically reducing the operating costs of biofiltration due to a reduced energy consumption and an increased packing material lifespan. Copyright © 2013 Elsevier Ltd. All rights reserved.

The effect of step height on the performance of three-dimensional ac electro-osmotic microfluidic pumps.

PubMed

Urbanski, John Paul; Levitan, Jeremy A; Burch, Damian N; Thorsen, Todd; Bazant, Martin Z

2007-05-15

Recent numerical and experimental studies have investigated the increase in efficiency of microfluidic ac electro-osmotic pumps by introducing nonplanar geometries with raised steps on the electrodes. In this study, we analyze the effect of the step height on ac electro-osmotic pump performance. AC electro-osmotic pumps with three-dimensional electroplated steps are fabricated on glass substrates and pumping velocities of low ionic strength electrolyte solutions are measured systematically using a custom microfluidic device. Numerical simulations predict an improvement in pump performance with increasing step height, at a given frequency and voltage, up to an optimal step height, which qualitatively matches the trend observed in experiment. For a broad range of step heights near the optimum, the observed flow is much faster than with existing planar pumps (at the same voltage and minimum feature size) and in the theoretically predicted direction of the "fluid conveyor belt" mechanism. For small step heights, the experiments also exhibit significant flow reversal at the optimal frequency, which cannot be explained by the theory, although the simulations predict weak flow reversal at higher frequencies due to incomplete charging. These results provide insight to an important parameter for the design of nonplanar electro-osmotic pumps and clues to improve the fundamental theory of ACEO.

A combined optical, SEM and STM study of growth spirals on the polytypic cadmium iodide crystals

NASA Astrophysics Data System (ADS)

Singh, Rajendra; Samanta, S. B.; Narlikar, A. V.; Trigunayat, G. C.

2000-05-01

Some novel results of a combined sequential study of growth spirals on the basal surface of the richly polytypic CdI 2 crystals by optical microscopy, scanning electron microscopy (SEM) and scanning tunneling microscopy (STM) are presented and discussed. Under the high resolution and magnification achieved in the scanning electron microscope, the growth steps of large heights seen in the optical micrographs are found to have a large number of additional steps of smaller heights existing between any two adjacent large height growth steps. When further seen by a scanning tunneling microscope, which provides still higher resolution, sequences of unit substeps, each of height equal to the unit cell height of the underlying polytype, are revealed to exist on the surface. Several large steps also lie between the unit steps, with heights equal to an integral multiple of either the unit cell height of the underlying polytype or the thickness of a molecular sheet I-Cd-I. It is suggested that initially a giant screw dislocation may form by brittle fracture of the crystal platelet, which may gradually decompose into numerous unit dislocations during subsequent crystal growth.

Phase-shifting interference microscope with extendable field of measurement

NASA Astrophysics Data System (ADS)

Lin, Shyh-Tsong; Hsu, Wei-Feng; Wang, Ming-Shiang

2018-04-01

An innovative phase-shifting interference microscope aimed at extending the field of measurement is proposed in this paper. The microscope comprises a light source module, a phase modulation module, and an interferometric module, which reconstructs the micro-structure contours of samples using the five-step phase-shifting algorithm. This paper discusses the measurement theory and outlines the configuration, experimental setup, and experimental results obtained using the proposed interference microscope. The results confirm the efficacy of the microscope, achieving a standard deviation of 2.4 nm from a step height of 86.2 nm in multiple examinations.

Metrological AFMs and its application for versatile nano-dimensional metrology tasks

NASA Astrophysics Data System (ADS)

Dai, Gaoliang; Dziomba, T.; Pohlenz, F.; Danzebrink, H.-U.; Koenders, L.

2010-08-01

Traceable calibrations of various micro and nano measurement devices are crucial tasks for ensuring reliable measurements for micro and nanotechnology. Today metrological AFM are widely used for traceable calibrations of nano dimensional standards. In this paper, we introduced the developments of metrological force microscopes at PTB. Of the three metrological AFMs described here, one is capable of measuring in a volume of 25 mm x 25 mm x 5 mm. All instruments feature interferometers and the three-dimensional position measurements are thus directly traceable to the metre definition. Some calibration examples on, for instance, flatness standards, step height standards, one and two dimensional gratings are demonstrated.

Flight-measured pressure characteristics of aft-facing steps in high Reynolds number flow at Mach numbers of 2.20, 2.50, and 2.80 and comparison with other data

NASA Technical Reports Server (NTRS)

Powers, S. G.

1978-01-01

The YF-12 airplane was studied to determine the pressure characteristics associated with an aft-facing step in high Reynolds number flow for nominal Mach numbers of 2.20, 2.50, and 2.80. Base pressure coefficients were obtained for three step heights. The surface static pressures ahead of and behind the step were measured for the no-step condition and for each of the step heights. A boundary layer rake was used to determine the local boundary layer conditions. The Reynolds number based on the length of flow ahead of the step was approximately 10 to the 8th power and the ratios of momentum thickness to step height ranged from 0.2 to 1.0. Base pressure coefficients were compared with other available data at similar Mach numbers and at ratios of momentum thickness to step height near 1.0. In addition, the data were compared with base pressure coefficients calculated by a semiempirical prediction method. The base pressure ratios are shown to be a function of Reynolds number based on momentum thickness. Profiles of the surface pressures ahead of and behind the step and the local boundary layer conditions are also presented.

Forward-facing steps induced transition in a subsonic boundary layer

NASA Astrophysics Data System (ADS)

Zh, Hui; Fu, Song

2017-10-01

A forward-facing step (FFS) immersed in a subsonic boundary layer is studied through a high-order flux reconstruction (FR) method to highlight the flow transition induced by the step. The step height is a third of the local boundary-layer thickness. The Reynolds number based on the step height is 720. Inlet disturbances are introduced giving rise to streamwise vortices upstream of the step. It is observed that these small-scale streamwise structures interact with the step and hairpin vortices are quickly developed after the step leading to flow transition in the boundary layer.

Nanomedicine photoluminescence crystal-inspired brain sensing approach

NASA Astrophysics Data System (ADS)

Fang, Yan; Wang, Fangzhen; Wu, Rong

2018-02-01

Precision sensing needs to overcome a gap of a single atomic step height standard. In response to the cutting-edge challenge, a heterosingle molecular nanomedicine crystal was developed wherein a nanomedicine crystal height less than 1 nm was designed and selfassembled on a substrate of either a highly ordered and freshly separated graphite or a N-doped silicon with hydrogen bonding by a home-made hybrid system of interacting single bioelectron donor-acceptor and a single biophoton donor-acceptor according to orthogonal mathematical optimization scheme, and an atomic spatial resolution conducting atomic force microscopy (C-AFM) with MHz signal processing by a special transformation of an atomic force microscopy (AFM) and a scanning tunneling microscopy (STM) were employed, wherein a z axis direction UV-VIS laser interferometer and a feedback circuit were used to achieve the minimized uncertainty of a micro-regional structure height and its corresponding local differential conductance quantization (spin state) process was repeatedly measured with a highly time resolution, as well as a pulsed UV-VIS laser micro-photoluminescence (PL) spectrum with a single photon resolution was set up by traceable quantum sensing and metrology relied up a quantum electrical triangle principle. The coupling of a single bioelectron conducting, a single biophoton photoluminescence, a frequency domain temporal spin phase in nanomedicine crystal-inspired sensing methods and sensor technologies were revealed by a combination of C-AFM and PL measurement data-based mathematic analyses1-3, as depicted in Figure 1 and repeated in nanomedicine crystals with a single atomic height. It is concluded that height-current-phase uncertainty correlation pave a way to develop a brain imaging and a single atomic height standard, quantum sensing, national security, worldwide impact1-3 technology and beyond.

From Undernutrition to Overnutrition: The Evolution of Overweight and Obesity among Young Men in Switzerland since the 19th Century

PubMed Central

Staub, Kaspar; Bender, Nicole; Floris, Joël; Pfister, Christian; Rühli, Frank J.

2016-01-01

Objective The global obesity epidemic continues, new approaches are needed to understand the causes. We analyzed data from an evolutionary perspective, stressing developmental plasticity. Methods We present diachronical height, weight, and BMI data for 702,902 Swiss male conscripts aged 18-20 years, a representative, standardized and unchanged data source. Results From 1875 to 1879, the height distribution was slightly left-skewed; 12.1% of the conscripts were underweight, overweight and obesity were rare. The BMI-to-height relationship was positive but not linear, and very short conscripts were particularly slim. Since the 1870s, Swiss conscripts became taller, a trend that markedly slowed in the 1990s. In contrast, weight increased in two distinct steps at the end of the 1980s and again after 2002. Since 2010, BMI did not increase but stabilized at a high level. Conclusions The body of young men adapted differently to varying living conditions over time: First, less investment in height and weight under conditions of undernutrition and food uncertainty; second, more investment in height under more stable nutritional conditions; third, development of obesity during conditions of plateaued height growth, overnutrition, and decreasing physical activity. This example contributes to the evaluation of hypotheses on human developmental plasticity. PMID:27544200

Absence of modulatory action on haptic height perception with musical pitch

PubMed Central

Geronazzo, Michele; Avanzini, Federico; Grassi, Massimo

2015-01-01

Although acoustic frequency is not a spatial property of physical objects, in common language, pitch, i.e., the psychological correlated of frequency, is often labeled spatially (i.e., “high in pitch” or “low in pitch”). Pitch-height is known to modulate (and interact with) the response of participants when they are asked to judge spatial properties of non-auditory stimuli (e.g., visual) in a variety of behavioral tasks. In the current study we investigated whether the modulatory action of pitch-height extended to the haptic estimation of height of a virtual step. We implemented a HW/SW setup which is able to render virtual 3D objects (stair-steps) haptically through a PHANTOM device, and to provide real-time continuous auditory feedback depending on the user interaction with the object. The haptic exploration was associated with a sinusoidal tone whose pitch varied as a function of the interaction point's height within (i) a narrower and (ii) a wider pitch range, or (iii) a random pitch variation acting as a control audio condition. Explorations were also performed with no sound (haptic only). Participants were instructed to explore the virtual step freely, and to communicate height estimation by opening their thumb and index finger to mimic the step riser height, or verbally by reporting the height in centimeters of the step riser. We analyzed the role of musical expertise by dividing participants into non-musicians and musicians. Results showed no effects of musical pitch on high-realistic haptic feedback. Overall there is no difference between the two groups in the proposed multimodal conditions. Additionally, we observed a different haptic response distribution between musicians and non-musicians when estimations of the auditory conditions are matched with estimations in the no sound condition. PMID:26441745

Modified Y-TZP Core Design Improves All-ceramic Crown Reliability

PubMed Central

Silva, N.R.F.A.; Bonfante, E.A.; Rafferty, B.T.; Zavanelli, R.A.; Rekow, E.D.; Thompson, V.P.; Coelho, P.G.

2011-01-01

This study tested the hypothesis that all-ceramic core-veneer system crown reliability is improved by modification of the core design. We modeled a tooth preparation by reducing the height of proximal walls by 1.5 mm and the occlusal surface by 2.0 mm. The CAD-based tooth preparation was replicated and positioned in a dental articulator for core and veneer fabrication. Standard (0.5 mm uniform thickness) and modified (2.5 mm height lingual and proximal cervical areas) core designs were produced, followed by the application of veneer porcelain for a total thickness of 1.5 mm. The crowns were cemented to 30-day-aged composite dies and were either single-load-to-failure or step-stress-accelerated fatigue-tested. Use of level probability plots showed significantly higher reliability for the modified core design group. The fatigue fracture modes were veneer chipping not exposing the core for the standard group, and exposing the veneer core interface for the modified group. PMID:21057036

Age-related differences in dynamic balance control during stair descent and effect of varying step geometry.

PubMed

Novak, A C; Komisar, V; Maki, B E; Fernie, G R

2016-01-01

The incidence of stairway falls and related injuries remains persistently high; however, the risk of stair injuries could be reduced through improved stairway design. The current study investigated dynamic balance control during stair descent and the effects of varying the step geometry. Data were collected from 20 healthy young and 20 older adults as they descended three staircases (riser heights of 7, 7.5 and 8 inches (178, 190 and 203 mm, respectively)). At each riser height, the tread run length was varied between 8 and 14 inches (203 mm and 356 mm) in one-inch (25 mm) increments. Kinematic data provided measures of segmental and whole-body dynamic control. Results demonstrated that older adults had greater lateral tilt of the upper body than young adults, but actually had larger margins of stability than the young in the antero-posterior direction as a result of their slower cadence. Nonetheless, for both age groups, the longer run lengths were found to provide the largest margins of stability. In addition, increase in run length and decrease in riser height tended to reduce forward upper body tilt. These results help to explain the underlying biomechanical factors associated with increased risk of falls and the relationship with step geometry. Considering the importance of stair ambulation in maintaining independence and activity in the community, this study highlights the definite need for safer stair design standards to minimize the risk of falls and increase stair safety across the lifespan. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Robot-Applied Resistance Augments the Effects of Body Weight-Supported Treadmill Training on Stepping and Synaptic Plasticity in a Rodent Model of Spinal Cord Injury.

PubMed

Hinahon, Erika; Estrada, Christina; Tong, Lin; Won, Deborah S; de Leon, Ray D

2017-08-01

The application of resistive forces has been used during body weight-supported treadmill training (BWSTT) to improve walking function after spinal cord injury (SCI). Whether this form of training actually augments the effects of BWSTT is not yet known. To determine if robotic-applied resistance augments the effects of BWSTT using a controlled experimental design in a rodent model of SCI. Spinally contused rats were treadmill trained using robotic resistance against horizontal (n = 9) or vertical (n = 8) hind limb movements. Hind limb stepping was tested before and after 6 weeks of training. Two control groups, one receiving standard training (ie, without resistance; n = 9) and one untrained (n = 8), were also tested. At the terminal experiment, the spinal cords were prepared for immunohistochemical analysis of synaptophysin. Six weeks of training with horizontal resistance increased step length, whereas training with vertical resistance enhanced step height and movement velocity. None of these changes occurred in the group that received standard (ie, no resistance) training or in the untrained group. Only standard training increased the number of step cycles and shortened cycle period toward normal values. Synaptophysin expression in the ventral horn was highest in rats trained with horizontal resistance and in untrained rats and was positively correlated with step length. Adding robotic-applied resistance to BWSTT produced gains in locomotor function over BWSTT alone. The impact of resistive forces on spinal connections may depend on the nature of the resistive forces and the synaptic milieu that is present after SCI.

Knee Joint Kinematics and Kinetics During a Lateral False-Step Maneuver

PubMed Central

Golden, Grace M.; Pavol, Michael J.; Hoffman, Mark A.

2009-01-01

Abstract Context: Cutting maneuvers have been implicated as a mechanism of noncontact anterior cruciate ligament (ACL) injuries in collegiate female basketball players. Objective: To investigate knee kinematics and kinetics during running when the width of a single step, relative to the path of travel, was manipulated, a lateral false-step maneuver. Design: Crossover design. Setting: University biomechanics laboratory. Patients or Other Participants: Thirteen female collegiate basketball athletes (age  =  19.7 ± 1.1 years, height  =  172.3 ± 8.3 cm, mass  =  71.8 ± 8.7 kg). Intervention(s): Three conditions: normal straight-ahead running, lateral false step of width 20% of body height, and lateral false step of width 35% of body height. Main Outcome Measure(s): Peak angles and internal moments for knee flexion, extension, abduction, adduction, internal rotation, and external rotation. Results: Differences were noted among conditions in peak knee angles (flexion [P < .01], extension [P  =  .02], abduction [P < .01], and internal rotation [P < .01]) and peak internal knee moments (abduction [P < .01], adduction [P < .01], and internal rotation [P  =  .03]). The lateral false step of width 35% of body height was associated with larger peak flexion, abduction, and internal rotation angles and larger peak abduction, adduction, and internal rotation moments than normal running. Peak flexion and internal rotation angles were also larger for the lateral false step of width 20% of body height than for normal running, whereas peak extension angle was smaller. Peak internal rotation angle increased progressively with increasing step width. Conclusions: Performing a lateral false-step maneuver resulted in changes in knee kinematics and kinetics compared with normal running. The differences observed for lateral false steps were consistent with proposed mechanisms of ACL loading, suggesting that lateral false steps represent a hitherto neglected mechanism of noncontact ACL injury. PMID:19771289

49 CFR 231.31 - Drawbars for freight cars; standard height.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Drawbars for freight cars; standard height. 231.31... cars; standard height. (a) Except on cars specified in paragraph (b) of this section— (1) On standard gage (561/2-inch gage) railroads, the maximum height of drawbars for freight cars (measured...

49 CFR 231.31 - Drawbars for freight cars; standard height.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Drawbars for freight cars; standard height. 231.31... cars; standard height. (a) Except on cars specified in paragraph (b) of this section— (1) On standard gage (561/2-inch gage) railroads, the maximum height of drawbars for freight cars (measured...

49 CFR 231.31 - Drawbars for freight cars; standard height.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Drawbars for freight cars; standard height. 231.31... cars; standard height. (a) Except on cars specified in paragraph (b) of this section— (1) On standard gage (561/2-inch gage) railroads, the maximum height of drawbars for freight cars (measured...

49 CFR 231.31 - Drawbars for freight cars; standard height.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Drawbars for freight cars; standard height. 231.31... cars; standard height. (a) Except on cars specified in paragraph (b) of this section— (1) On standard gage (561/2-inch gage) railroads, the maximum height of drawbars for freight cars (measured...

49 CFR 231.31 - Drawbars for freight cars; standard height.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Drawbars for freight cars; standard height. 231.31... cars; standard height. (a) Except on cars specified in paragraph (b) of this section— (1) On standard gage (561/2-inch gage) railroads, the maximum height of drawbars for freight cars (measured...

50 CFR 648.50 - Shell-height standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Shell-height standard. 648.50 Section 648... Atlantic Sea Scallop Fishery § 648.50 Shell-height standard. (a) Minimum shell height. The minimum shell height for in-shell scallops that may be landed, or possessed at or after landing, is 3.5 inches (8.9 cm...

50 CFR 648.50 - Shell-height standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Shell-height standard. 648.50 Section 648... Atlantic Sea Scallop Fishery § 648.50 Shell-height standard. (a) Minimum shell height. The minimum shell height for in-shell scallops that may be landed, or possessed at or after landing, is 3.5 inches (8.9 cm...

Effects of an aft facing step on the surface of a laminar flow glider wing

NASA Technical Reports Server (NTRS)

Sandlin, Doral R.; Saiki, Neal

1993-01-01

A motor glider was used to perform a flight test study on the effects of aft facing steps in a laminar boundary layer. This study focuses on two dimensional aft facing steps oriented spanwise to the flow. The size and location of the aft facing steps were varied in order to determine the critical size that will force premature transition. Transition over a step was found to be primarily a function of Reynolds number based on step height. Both of the step height Reynolds numbers for premature and full transition were determined. A hot film anemometry system was used to detect transition.

Step-rate cut-points for physical activity intensity in patients with multiple sclerosis: The effect of disability status.

PubMed

Agiovlasitis, Stamatis; Sandroff, Brian M; Motl, Robert W

2016-02-15

Evaluating the relationship between step-rate and rate of oxygen uptake (VO2) may allow for practical physical activity assessment in patients with multiple sclerosis (MS) of differing disability levels. To examine whether the VO2 to step-rate relationship during over-ground walking differs across varying disability levels among patients with MS and to develop step-rate thresholds for moderate- and vigorous-intensity physical activity. Adults with MS (N=58; age: 51 ± 9 years; 48 women) completed one over-ground walking trial at comfortable speed, one at 0.22 m · s(-1) slower, and one at 0.22 m · s(-1) faster. Each trial lasted 6 min. VO2 was measured with portable spirometry and steps with hand-tally. Disability status was classified as mild, moderate, or severe based on Expanded Disability Status Scale scores. Multi-level regression indicated that step-rate, disability status, and height significantly predicted VO2 (p<0.05). Based on this model, we developed step-rate thresholds for activity intensity that vary by disability status and height. A separate regression without height allowed for development of step-rate thresholds that vary only by disability status. The VO2 during over-ground walking differs among ambulatory patients with MS based on disability level and height, yielding different step-rate thresholds for physical activity intensity. Copyright © 2015 Elsevier B.V. All rights reserved.

Quantification of soil water retention parameters using multi-section TDR-waveform analysis

NASA Astrophysics Data System (ADS)

Baviskar, S. M.; Heimovaara, T. J.

2017-06-01

Soil water retention parameters are important for describing flow in variably saturated soils. TDR is one of the standard methods used for determining water content in soil samples. In this study, we present an approach to estimate water retention parameters of a sample which is initially saturated and subjected to an incremental decrease in boundary head causing it to drain in a multi-step fashion. TDR waveforms are measured along the height of the sample at assumed different hydrostatic conditions at daily interval. The cumulative discharge outflow drained from the sample is also recorded. The saturated water content is obtained using volumetric analysis after the final step involved in multi-step drainage. The equation obtained by coupling the unsaturated parametric function and the apparent dielectric permittivity is fitted to a TDR wave propagation forward model. The unsaturated parametric function is used to spatially interpolate the water contents along TDR probe. The cumulative discharge outflow data is fitted with cumulative discharge estimated using the unsaturated parametric function. The weight of water inside the sample estimated at the first and final boundary head in multi-step drainage is fitted with the corresponding weights calculated using unsaturated parametric function. A Bayesian optimization scheme is used to obtain optimized water retention parameters for these different objective functions. This approach can be used for samples with long heights and is especially suitable for characterizing sands with a uniform particle size distribution at low capillary heads.

Optimal leveling of flow over one-dimensional topography by Marangoni stresses

NASA Astrophysics Data System (ADS)

Gramlich, C. M.; Kalliadasis, Serafim; Homsy, G. M.; Messer, C.

2002-06-01

A thin viscous film flowing over a step down in topography exhibits a capillary ridge preceding the step. In applications, a planar liquid surface is often desired and hence there is a need to level the ridge. This paper investigates optimal leveling of the ridge by means of a Marangoni stress such as might be produced by a localized heater creating temperature variations at the film surface. The differential equation for the free surface based on lubrication theory and incorporating the effects of topography and temperature gradients is solved numerically for steps down in topography with different temperature profiles. Both rectangular "top-hat" and parabolic profiles, chosen to model physically realizable heaters, were found to be effective in reducing the height of the capillary ridge. Leveling the ridge is formulated as an optimization problem to minimize the maximum free-surface height by varying the heater strength, position, and width. With the optimized heaters, the variation in surface height is reduced by more than 50% compared to the original isothermal ridge. For more effective leveling, we consider an asymmetric n-step temperature distribution. The optimal n-step heater in this case results in (n+1) ridges of equal size; 2- and 3-step heaters reduce the variation in surface height by about 70% and 77%, respectively. Finally, we explore the potential of coolers and step temperature profiles for still more effective leveling.

On High-Frequency Topography-Implied Gravity Signals for a Height System Unification Using GOCE-Based Global Geopotential Models

NASA Astrophysics Data System (ADS)

Grombein, Thomas; Seitz, Kurt; Heck, Bernhard

2017-03-01

National height reference systems have conventionally been linked to the local mean sea level, observed at individual tide gauges. Due to variations in the sea surface topography, the reference levels of these systems are inconsistent, causing height datum offsets of up to ±1-2 m. For the unification of height systems, a satellite-based method is presented that utilizes global geopotential models (GGMs) derived from ESA's satellite mission Gravity field and steady-state Ocean Circulation Explorer (GOCE). In this context, height datum offsets are estimated within a least squares adjustment by comparing the GGM information with measured GNSS/leveling data. While the GNSS/leveling data comprises the full spectral information, GOCE GGMs are restricted to long wavelengths according to the maximum degree of their spherical harmonic representation. To provide accurate height datum offsets, it is indispensable to account for the remaining signal above this maximum degree, known as the omission error of the GGM. Therefore, a combination of the GOCE information with the high-resolution Earth Gravitational Model 2008 (EGM2008) is performed. The main contribution of this paper is to analyze the benefit, when high-frequency topography-implied gravity signals are additionally used to reduce the remaining omission error of EGM2008. In terms of a spectral extension, a new method is proposed that does not rely on an assumed spectral consistency of topographic heights and implied gravity as is the case for the residual terrain modeling (RTM) technique. In the first step of this new approach, gravity forward modeling based on tesseroid mass bodies is performed according to the Rock-Water-Ice (RWI) approach. In a second step, the resulting full spectral RWI-based topographic potential values are reduced by the effect of the topographic gravity field model RWI_TOPO_2015, thus, removing the long to medium wavelengths. By using the latest GOCE GGMs, the impact of topography-implied gravity signals on the estimation of height datum offsets is analyzed in detail for representative GNSS/leveling data sets in Germany, Austria, and Brazil. Besides considerable changes in the estimated offset of up to 3 cm, the conducted analyses show that significant improvements of 30-40% can be achieved in terms of a reduced standard deviation and range of the least squares adjusted residuals.

Unification of height systems in the frame of GGOS

NASA Astrophysics Data System (ADS)

Sánchez, Laura

2015-04-01

Most of the existing vertical reference systems do not fulfil the accuracy requirements of modern Geodesy. They refer to local sea surface levels, are stationary (do not consider variations in time), realize different physical height types (orthometric, normal, normal-orthometric, etc.), and their combination in a global frame presents uncertainties at the metre level. To provide a precise geodetic infrastructure for monitoring the Earth system, the Global Geodetic Observing System (GGOS) of the International Association of Geodesy (IAG), promotes the standardization of the height systems worldwide. The main purpose is to establish a global gravity field-related vertical reference system that (1) supports a highly-precise (at cm-level) combination of physical and geometric heights worldwide, (2) allows the unification of all existing local height datums, and (3) guarantees vertical coordinates with global consistency (the same accuracy everywhere) and long-term stability (the same order of accuracy at any time). Under this umbrella, the present contribution concentrates on the definition and realization of a conventional global vertical reference system; the standardization of the geodetic data referring to the existing height systems; and the formulation of appropriate strategies for the precise transformation of the local height datums into the global vertical reference system. The proposed vertical reference system is based on two components: a geometric component consisting of ellipsoidal heights as coordinates and a level ellipsoid as the reference surface, and a physical component comprising geopotential numbers as coordinates and an equipotential surface defined by a conventional W0 value as the reference surface. The definition of the physical component is based on potential parameters in order to provide reference to any type of physical heights (normal, orthometric, etc.). The conversion of geopotential numbers into metric heights and the modelling of the reference surface (geoid or quasigeoid determination) are considered as steps of the realization. The vertical datum unification strategy is based on (1) the physical connection of height datums to determine their discrepancies, (2) joint analysis of satellite altimetry and tide gauge records to determine time variations of sea level at reference tide gauges, (3) combination of geometrical and physical heights in a well-distributed and high-precise reference frame to estimate the relationship between the individual vertical levels and the global one, and (4) analysis of GNSS time series at reference tide gauges to separate crustal movements from sea level changes. The final vertical transformation parameters are provided by the common adjustment of the observation equations derived from these methods.

Toward practical 3D radiography of pipeline girth welds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wassink, Casper, E-mail: casper.wassink@applusrtd.com; Hol, Martijn, E-mail: martijn.hol@applusrtd.com; Flikweert, Arjan, E-mail: martijn.hol@applusrtd.com

2015-03-31

Digital radiography has made its way into in-the-field girth weld testing. With recent generations of detectors and x-ray tubes it is possible to reach the image quality desired in standards as well as the speed of inspection desired to be competitive with film radiography and automated ultrasonic testing. This paper will show the application of these technologies in the RTD Rayscan system. The method for achieving an image quality that complies with or even exceeds prevailing industrial standards will be presented, as well as the application on pipeline girth welds with CRA layers. A next step in development will bemore » to also achieve a measurement of weld flaw height to allow for performing an Engineering Critical Assessment on the weld. This will allow for similar acceptance limits as currently used with Automated Ultrasonic Testing of pipeline girth welds. Although a sufficient sizing accuracy was already demonstrated and qualified in the TomoCAR system, testing in some applications is restricted to time limits. The paper will present some experiments that were performed to achieve flaw height approximation within these time limits.« less

A landmark-based 3D calibration strategy for SPM

NASA Astrophysics Data System (ADS)

Ritter, Martin; Dziomba, Thorsten; Kranzmann, Axel; Koenders, Ludger

2007-02-01

We present a new method for the complete three-dimensional (3D) calibration of scanning probe microscopes (SPM) and other high-resolution microscopes, e.g., scanning electron microscopes (SEM) and confocal laser scanning microscopes (CLSM), by applying a 3D micrometre-sized reference structure with the shape of a cascade slope-step pyramid. The 3D reference structure was produced by focused ion beam induced metal deposition. In contrast to pitch featured calibration procedures that require separate lateral and vertical reference standards such as gratings and step height structures, the new method includes the use of landmarks, which are well established in calibration and measurement tasks on a larger scale. However, the landmarks applied to the new 3D reference structures are of sub-micrometre size, the so-called 'nanomarkers'. The nanomarker coordinates are used for a geometrical calibration of the scanning process of SPM as well as of other instrument types such as SEM and CLSM. For that purpose, a parameter estimation routine involving three scale factors and three coupling factors has been developed that allows lateral and vertical calibration in only one sampling step. With this new calibration strategy, we are able to detect deviations of SPM lateral scaling errors as well as coupling effects causing, e.g., a lateral coordinate shift depending on the measured height position of the probe.

Non-Gaussian Analysis of Turbulent Boundary Layer Fluctuating Pressure on Aircraft Skin Panels

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A.; Steinwolf, Alexander

2005-01-01

The purpose of the study is to investigate the probability density function (PDF) of turbulent boundary layer fluctuating pressures measured on the outer sidewall of a supersonic transport aircraft and to approximate these PDFs by analytical models. Experimental flight results show that the fluctuating pressure PDFs differ from the Gaussian distribution even for standard smooth surface conditions. The PDF tails are wider and longer than those of the Gaussian model. For pressure fluctuations in front of forward-facing step discontinuities, deviations from the Gaussian model are more significant and the PDFs become asymmetrical. There is a certain spatial pattern of the skewness and kurtosis behavior depending on the distance upstream from the step. All characteristics related to non-Gaussian behavior are highly dependent upon the distance from the step and the step height, less dependent on aircraft speed, and not dependent on the fuselage location. A Hermite polynomial transform model and a piecewise-Gaussian model fit the flight data well both for the smooth and stepped conditions. The piecewise-Gaussian approximation can be additionally regarded for convenience in usage after the model is constructed.

Use of standardized visual assessments of riparian and stream condition to manage riparian bird habitat in eastern Oregon.

PubMed

Cooke, Hilary A; Zack, Steve

2009-07-01

The importance of riparian vegetation to support stream function and provide riparian bird habitat in semiarid landscapes suggests that standardized assessment tools that include vegetation criteria to evaluate stream health could also be used to assess habitat conditions for riparian-dependent birds. We first evaluated the ability of two visual assessments of woody vegetation in the riparian zone (corridor width and height) to describe variation in the obligate riparian bird ensemble along 19 streams in eastern Oregon. Overall species richness and the abundances of three species all correlated significantly with both, but width was more important than height. We then examined the utility of the riparian zone criteria in three standardized and commonly used rapid visual riparian assessment protocols--the USDI BLM Proper Functioning Condition (PFC) assessment, the USDA NRCS Stream Visual Assessment Protocol (SVAP), and the U.S. EPA Habitat Assessment Field Data Sheet (HAFDS)--to assess potential riparian bird habitat. Based on the degree of correlation of bird species richness with assessment ratings, we found that PFC does not assess obligate riparian bird habitat condition, SVAP provides a coarse estimate, and HAFDS provides the best assessment. We recommend quantitative measures of woody vegetation for all assessments and that all protocols incorporate woody vegetation height. Given that rapid assessments may be the only source of information for thousands of kilometers of streams in the western United States, incorporating simple vegetation measurements is a critical step in evaluating the status of riparian bird habitat and provides a tool for tracking changes in vegetation condition resulting from management decisions.

Does my step look big in this? A visual illusion leads to safer stepping behaviour.

PubMed

Elliott, David B; Vale, Anna; Whitaker, David; Buckley, John G

2009-01-01

Tripping is a common factor in falls and a typical safety strategy to avoid tripping on steps or stairs is to increase foot clearance over the step edge. In the present study we asked whether the perceived height of a step could be increased using a visual illusion and whether this would lead to the adoption of a safer stepping strategy, in terms of greater foot clearance over the step edge. The study also addressed the controversial question of whether motor actions are dissociated from visual perception. 21 young, healthy subjects perceived the step to be higher in a configuration of the horizontal-vertical illusion compared to a reverse configuration (p = 0.01). During a simple stepping task, maximum toe elevation changed by an amount corresponding to the size of the visual illusion (p<0.001). Linear regression analyses showed highly significant associations between perceived step height and maximum toe elevation for all conditions. The perceived height of a step can be manipulated using a simple visual illusion, leading to the adoption of a safer stepping strategy in terms of greater foot clearance over a step edge. In addition, the strong link found between perception of a visual illusion and visuomotor action provides additional support to the view that the original, controversial proposal by Goodale and Milner (1992) of two separate and distinct visual streams for perception and visuomotor action should be re-evaluated.

Evaluation of the Indonesian National Standard for elementary school furniture based on children's anthropometry.

PubMed

Yanto; Lu, Chih-Wei; Lu, Jun-Ming

2017-07-01

In Indonesia, National Standardization Agency of Indonesia issued the Indonesian National Standard SNI 12-1015-1989 and SNI 12-1016-1989 to define the type of furniture dimensions that should be used by children in the elementary school level. This study aims to examine whether the current national standards for elementary school furniture dimensions issued by National Standardization Agency of Indonesia match the up-to-date Indonesian children's anthropometry. Two types of school furniture, small type (Type I, for grade 1-3) and large type (Type II, for grade 4-6), were evaluated in terms of seat height, seat depth, seat width and backrest height of a chair as well as the height and underneath height of a desk. 1146 students aged between 6 and 12 years old participated in the study. Seven anthropometric measurements were taken including stature, sitting shoulder height, sitting elbow height, popliteal height, buttock-popliteal length, knee height and hip breadth. Based on the standard school furniture dimensions and students' body dimensions, numbers of matches and mismatches between them were computed. Results indicated a substantial degree of mismatch between children's anthropometry and the standard dimensions of school furniture. The standard seat height was not appropriate for students among different grades with the mismatch percentage ranging from 63.4% to 96.7% for Type I and 72.7% to 99.0% for Type II. For desk height, the standard dimensions were not appropriate for students among different grades with the mismatch percentage ranging from 32.3% to 88.9% for Type I and 67.7% to 99.0% for Type II. Apparently, the current standards are out of date and need to be updated. Four different sizes of school furniture were hence proposed to accommodate the variation in students' anthropometry from Grade 1 to Grade 6. The proposed standard dimensions (PrS) of school furniture cover a slightly broader range of age and present a higher cumulative fit than the current standard dimensions (CrS). In addition, a better strategy for sizing can be also developed to fit chairs and desks to a larger number of students. Copyright © 2017 Elsevier Ltd. All rights reserved.

Using Curved Crystals to Study Terrace-Width Distributions.

NASA Astrophysics Data System (ADS)

Einstein, Theodore L.

Recent experiments on curved crystals of noble and late transition metals (Ortega and Juurlink groups) have renewed interest in terrace width distributions (TWD) for vicinal surfaces. Thus, it is timely to discuss refinements of TWD analysis that are absent from the standard reviews. Rather than by Gaussians, TWDs are better described by the generalized Wigner surmise, with a power-law rise and a Gaussian decay, thereby including effects evident for weak step repulsion: skewness and peak shifts down from the mean spacing. Curved crystals allow analysis of several mean spacings with the same substrate, so that one can check the scaling with the mean width. This is important since such scaling confirms well-established theory. Failure to scale also can provide significant insights. Complicating factors can include step touching (local double-height steps), oscillatory step interactions mediated by metallic (but not topological) surface states, short-range corrections to the inverse-square step repulsion, and accounting for the offset between adjacent layers of almost all surfaces. We discuss how to deal with these issues. For in-plane misoriented steps there are formulas to describe the stiffness but not yet the strength of the elastic interstep repulsion. Supported in part by NSF-CHE 13-05892.

Stepping over obstacles: anticipatory modifications in children with and without Down syndrome.

PubMed

Virji-Babul, Naznin; Brown, Michelle

2004-12-01

The purpose of this study was to explore the mechanism of anticipatory control of gait in relation to the perception of an obstacle. Typically developing (TD) children (4-7 years of age) and children with Down syndrome (5-6 years of age) walked and stepped over obstacles of two different heights-a "subtle" obstacle that was placed at a very low distance from the floor (1% of total body height) and an "obvious" obstacle that was placed at a much higher distance from the floor (15% of total body height). Spatial and temporal measures of the gait cycle were analyzed. TD children showed increased variability in pre-obstacle step lengths only in response to the higher obstacle. Children with DS showed a decrease in variability in response to the higher obstacle and marked qualitative changes in their gait cycle. Both groups of children were able to scale toe clearance with obstacle height. These results show that TD young children can make task-specific anticipatory adjustments by modulating step length and toe clearance. Children with DS show appropriate scaling of toe clearance and are beginning to show the emergence of anticipatory responses under specific environmental conditions.

Using refraction in thick glass plates for optical path length modulation in low coherence interferometry.

PubMed

Kröger, Niklas; Schlobohm, Jochen; Pösch, Andreas; Reithmeier, Eduard

2017-09-01

In Michelson interferometer setups the standard way to generate different optical path lengths between a measurement arm and a reference arm relies on expensive high precision linear stages such as piezo actuators. We present an alternative approach based on the refraction of light at optical interfaces using a cheap stepper motor with high gearing ratio to control the rotation of a glass plate. The beam path is examined and a relation between angle of rotation and change in optical path length is devised. As verification, an experimental setup is presented, and reconstruction results from a measurement standard are shown. The reconstructed step height from this setup lies within 1.25% of the expected value.

Laser confocal feedback tomography and nano-step height measurement

PubMed Central

Tan, Yidong; Wang, Weiping; Xu, Chunxin; Zhang, Shulian

2013-01-01

A promising method for tomography and step height measurement is proposed, which combines the high sensitivity of the frequency-shifted feedback laser and the axial positioning ability of confocal microscopy. By demodulating the feedback-induced intensity modulation signals, the obtained amplitude and phase information are used to respectively determine the coarse and fine measurement of the samples. Imaging the micro devices and biological samples by the demodulated amplitude, this approach is proved to be able to achieve the cross-sectional image in highly scattered mediums. And then the successful height measurement of nano-step on a glass-substrate grating by combination of both amplitude and phase information indicates its axial high resolution (better than 2 nm) in a non-ambiguous range of about ten microns. PMID:24145717

Step-height measurement with a low coherence interferometer using continuous wavelet transform

NASA Astrophysics Data System (ADS)

Jian, Zhang; Suzuki, Takamasa; Choi, Samuel; Sasaki, Osami

2013-12-01

With the development of electronic technology in recent years, electronic components become increasingly miniaturized. At the same time a more accurate measurement method becomes indispensable. In the current measurement of nano-level, the Michelson interferometer with the laser diode is widely used, the method can measure the object accurately without touching the object. However it can't measure the step height that is larger than the half-wavelength. In this study, we improve the conventional Michelson interferometer by using a super luminescent diode and continuous wavelet transform, which can detect the time that maximizes the amplitude of the interference signal. We can accurately measure the surface-position of the object with this time. The method used in this experiment measured the step height of 20 microns.

Linking pedestrian flow characteristics with stepping locomotion

NASA Astrophysics Data System (ADS)

Wang, Jiayue; Boltes, Maik; Seyfried, Armin; Zhang, Jun; Ziemer, Verena; Weng, Wenguo

2018-06-01

While properties of human traffic flow are described by speed, density and flow, the locomotion of pedestrian is based on steps. To relate characteristics of human locomotor system with properties of human traffic flow, this paper aims to connect gait characteristics like step length, step frequency, swaying amplitude and synchronization with speed and density and thus to build a ground for advanced pedestrian models. For this aim, observational and experimental study on the single-file movement of pedestrians at different densities is conducted. Methods to measure step length, step frequency, swaying amplitude and step synchronization are proposed by means of trajectories of the head. Mathematical models for the relations of step length or frequency and speed are evaluated. The problem how step length and step duration are influenced by factors like body height and density is investigated. It is shown that the effect of body height on step length and step duration changes with density. Furthermore, two different types of step in-phase synchronization between two successive pedestrians are observed and the influence of step synchronization on step length is examined.

Development of MCNPX-ESUT computer code for simulation of neutron/gamma pulse height distribution

NASA Astrophysics Data System (ADS)

Abolfazl Hosseini, Seyed; Vosoughi, Naser; Zangian, Mehdi

2015-05-01

In this paper, the development of the MCNPX-ESUT (MCNPX-Energy Engineering of Sharif University of Technology) computer code for simulation of neutron/gamma pulse height distribution is reported. Since liquid organic scintillators like NE-213 are well suited and routinely used for spectrometry in mixed neutron/gamma fields, this type of detectors is selected for simulation in the present study. The proposed algorithm for simulation includes four main steps. The first step is the modeling of the neutron/gamma particle transport and their interactions with the materials in the environment and detector volume. In the second step, the number of scintillation photons due to charged particles such as electrons, alphas, protons and carbon nuclei in the scintillator material is calculated. In the third step, the transport of scintillation photons in the scintillator and lightguide is simulated. Finally, the resolution corresponding to the experiment is considered in the last step of the simulation. Unlike the similar computer codes like SCINFUL, NRESP7 and PHRESP, the developed computer code is applicable to both neutron and gamma sources. Hence, the discrimination of neutron and gamma in the mixed fields may be performed using the MCNPX-ESUT computer code. The main feature of MCNPX-ESUT computer code is that the neutron/gamma pulse height simulation may be performed without needing any sort of post processing. In the present study, the pulse height distributions due to a monoenergetic neutron/gamma source in NE-213 detector using MCNPX-ESUT computer code is simulated. The simulated neutron pulse height distributions are validated through comparing with experimental data (Gohil et al. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 664 (2012) 304-309.) and the results obtained from similar computer codes like SCINFUL, NRESP7 and Geant4. The simulated gamma pulse height distribution for a 137Cs source is also compared with the experimental data.

ABCD: Anthropometry, Body Composition, and Crohn Disease.

PubMed

Brookes, Denise S K; Briody, Julie N; Davies, Peter S W; Hill, Rebecca J

2016-07-01

Young individuals with Crohn disease (CD) are at risk of poor bone mineral density (BMD) and reduced lean tissue mass (LTM). The importance of LTM for maintaining skeletal health, in both incident and established CD, is evidenced. We used dual-energy x-ray absorptiometry assessment to identify areal BMD and LTM in individuals with CD. In 57 patients with CD (15F; 12.99-14.16 years) anthropometric, disease activity, bone age assessment, and total body dual-energy x-ray absorptiometry measurements were acquired. A 4-step algorithm was used to assess simultaneous bone and body composition data: areal BMD and height z scores, and LTM for height and bone mineral content (BMC) for LTM z scores were calculated. Low z score cut-off values were defined as ≤1 standard deviations below the population means. The CD cohort showed: low areal BMD z scores (P = 0.00); and low LTM for height (P = 0.00) according to defined cut-off values. BMC appeared to be adapting for the lower amount of LTM. Correcting for bone age eliminated the low areal BMD z scores. As expected, LTM for height and BMC for LTM z scores remained unchanged. We present a useful clinical algorithm to show significant LTM for height deficits, regardless of chronological or bone age, in this CD cohort. BMC seemed to adapt to the reduced LTM, indicating clinically "normal" areal BMD for age when considered for height. The ongoing deficits in LTM may, however, create chronic long-term consequences for bone health. Improving LTM should be a focus of clinical treatment in individuals with CD.

Modeling the impact of bubbling bed hydrodynamics on tar yield and its fluctuations during biomass fast pyrolysis

DOE PAGES

Xiong, Qingang; Ramirez, Emilio; Pannala, Sreekanth; ...

2015-10-09

The impact of bubbling bed hydrodynamics on temporal variations in the exit tar yield for biomass fast pyrolysis was investigated using computational simulations of an experimental laboratory-scale reactor. A multi-fluid computational fluid dynamics model was employed to simulate the differential conservation equations in the reactor, and this was combined with a multi-component, multi-step pyrolysis kinetics scheme for biomass to account for chemical reactions. The predicted mean tar yields at the reactor exit appear to match corresponding experimental observations. Parametric studies predicted that increasing the fluidization velocity should improve the mean tar yield but increase its temporal variations. Increases in themore » mean tar yield coincide with reducing the diameter of sand particles or increasing the initial sand bed height. However, trends in tar yield variability are more complex than the trends in mean yield. The standard deviation in tar yield reaches a maximum with changes in sand particle size. As a result, the standard deviation in tar yield increases with the increases in initial bed height in freely bubbling state, while reaches a maximum in slugging state.« less

Modeling Bloch oscillations in ultra-small Josephson junctions

NASA Astrophysics Data System (ADS)

Vora, Heli; Kautz, Richard; Nam, Sae Woo; Aumentado, Jose

In a seminal paper, Likharev et al. developed a theory for ultra-small Josephson junctions with Josephson coupling energy (Ej) less than the charging energy (Ec) and showed that such junctions demonstrate Bloch oscillations which could be used to make a fundamental current standard that is a dual of the Josephson volt standard. Here, based on the model of Geigenmüller and Schön, we numerically calculate the current-voltage relationship of such an ultra-small junction which includes various error processes present in a nanoscale Josephson junction such as random quasiparticle tunneling events and Zener tunneling between bands. This model allows us to explore the parameter space to see the effect of each process on the width and height of the Bloch step and serves as a guide to determine whether it is possible to build a quantum current standard of a metrological precision using Bloch oscillations.

Magnesite Step Growth Rates as a Function of the Aqueous Magnesium:Carbonate Ratio

DOE PAGES

Bracco, Jacquelyn N.; Stack, Andrew G.; Higgins, Steven R.

2014-10-01

Step velocities of monolayer-height steps on the (101 ⁻4) magnesite surface have been measured as functions of the aqueous magnesium-to-carbonate ratio and saturation index (SI) using a hydrothermal atomic force microscope (HAFM). At SI ≤ 1.9 and 80-90 °C, step velocities were found to be invariant with changes in the magnesium-to-carbonate ratio, an observation in contrast with standard models for growth and dissolution of ionically-bonded, multi-component crystals. However, at high saturation indices (SI = 2.15), step velocities displayed a ratio dependence, maximized at magnesium-to-carbonate ratios slightly greater than 1:1. Traditional affinity-based models were unable to describe growth rates at themore » higher saturation index. Step velocities also could not be modeled solely through nucleation of kink sites, in contrast to other minerals whose bonding between constituent ions is also dominantly ionic in nature, such as calcite and barite. Instead, they could be described only by a model that incorporates both kink nucleation and propagation. Based on observed step morphological changes at these higher saturation indices, the step velocity maximum at SI = 2.15 is likely due to the rate of attachment to propagating kink sites overcoming the rate of detachment from kink sites as the latter becomes less significant under far from equilibrium conditions.« less

Throwing out the baby with the bathwater?: Comparing 2 approaches to implausible values of change in body size.

PubMed

Gray, Christine L; Robinson, Whitney R

2014-07-01

In childhood obesity research, the appearance of height loss, or "shrinkage," indicates measurement error. It is unclear whether a common response--excluding "shrinkers" from analysis--reduces bias. Using data from the National Longitudinal Study of Adolescent Health, we sampled 816 female adolescents (≥17 years) who had attained adult height by 1996 and for whom adult height was consistently measured in 2001 and 2008 ("gold-standard" height). We estimated adolescent obesity prevalence and the association of maternal education with adolescent obesity under 3 conditions: excluding shrinkers (for whom gold-standard height was less than recorded height in 1996), retaining shrinkers, and retaining shrinkers but substituting their gold-standard height. When we estimated obesity prevalence, excluding shrinkers decreased precision without improving validity. When we regressed obesity on maternal education, excluding shrinkers produced less valid and less precise estimates. In some circumstances, ignoring shrinkage is a better strategy than excluding shrinkers.

Evaluation of a new approach to compute intervertebral disc height measurements from lateral radiographic views of the spine.

PubMed

Allaire, Brett T; DePaolis Kaluza, M Clara; Bruno, Alexander G; Samelson, Elizabeth J; Kiel, Douglas P; Anderson, Dennis E; Bouxsein, Mary L

2017-01-01

Current standard methods to quantify disc height, namely distortion compensated Roentgen analysis (DCRA), have been mostly utilized in the lumbar and cervical spine and have strict exclusion criteria. Specifically, discs adjacent to a vertebral fracture are excluded from measurement, thus limiting the use of DCRA in studies that include older populations with a high prevalence of vertebral fractures. Thus, we developed and tested a modified DCRA algorithm that does not depend on vertebral shape. Participants included 1186 men and women from the Framingham Heart Study Offspring and Third Generation Multidetector CT Study. Lateral CT scout images were used to place 6 morphometry points around each vertebra at 13 vertebral levels in each participant. Disc heights were calculated utilizing these morphometry points using DCRA methodology and our modified version of DCRA, which requires information from fewer morphometry points than the standard DCRA. Modified DCRA and standard DCRA measures of disc height are highly correlated, with concordance correlation coefficients above 0.999. Both measures demonstrate good inter- and intra-operator reproducibility. 13.9 % of available disc heights were not evaluable or excluded using the standard DCRA algorithm, while only 3.3 % of disc heights were not evaluable using our modified DCRA algorithm. Using our modified DCRA algorithm, it is not necessary to exclude vertebrae with fracture or other deformity from disc height measurements as in the standard DCRA. Modified DCRA also yields identical measurements to the standard DCRA. Thus, the use of modified DCRA for quantitative assessment of disc height will lead to less missing data without any loss of accuracy, making it a preferred alternative to the current standard methodology.

Two-step solar filament eruptions

NASA Astrophysics Data System (ADS)

Filippov, B.

2018-04-01

Coronal mass ejections (CMEs) are closely related to eruptive filaments and usually are the continuation of the same eruptive process into the upper corona. There are failed filament eruptions when a filament decelerates and stops at some greater height in the corona. Sometimes the filament after several hours starts to rise again and develops into the successful eruption with a CME formation. We propose a simple model for the interpretation of such two-step eruptions in terms of equilibrium of a flux rope in a two-scale ambient magnetic field. The eruption is caused by a slow decrease of the holding magnetic field. The presence of two critical heights for the initiation of the flux-rope vertical instability allows the flux rope to stay after the first jump some time in a metastable equilibrium near the second critical height. If the decrease of the ambient field continues, the next eruption step follows.

Shearing interference microscope for step-height measurements.

PubMed

Trịnh, Hưng-Xuân; Lin, Shyh-Tsong; Chen, Liang-Chia; Yeh, Sheng-Lih; Chen, Chin-Sheng; Hoang, Hong-Hai

2017-05-01

A shearing interference microscope using a Savart prism as the shear plate is proposed for inspecting step-heights. Where the light beam propagates through the Savart prism and microscopic system to illuminate the sample, it then turns back to re-pass through the Savart prism and microscopic system to generate a shearing interference pattern on the camera. Two measurement modes, phase-shifting and phase-scanning, can be utilized to determine the depths of the step-heights on the sample. The first mode, which employs a narrowband source, is based on the five-step phase-shifting algorithm and has a measurement range of a quarter-wavelength. The second mode, which adopts a broadband source, is based on peak-intensity identification technology and has a measurement range up to a few micrometres. This paper is to introduce the configuration and measurement theory of this microscope, perform a setup used to implement it, and present the experimental results from the uses of the setup. The results not only verify the validity but also confirm the high measurement repeatability of the proposed microscope. © 2017 The Authors Journal of Microscopy © 2017 Royal Microscopical Society.

Measured close lightning leader-step electric-field-derivative waveforms.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jordan, Doug M.; Hill, Dustin; Biagi, Christopher J.

2010-12-01

We characterize the measured electric field-derivative (dE/dt) waveforms of lightning stepped-leader steps from three negative lightning flashes at distances of tens to hundreds of meters. Electromagnetic signatures of leader steps at such close distances have rarely been documented in previous literature. Individual leader-step three-dimensional locations are determined by a dE/dt TOA system. The leader-step field derivative is typically a bipolar pulse with a sharp initial half-cycle of the same polarity as that of the return stroke, followed by an opposite polarity overshoot that decays relatively slowly to background level. This overshoot increases in amplitude relative to the initial peak andmore » becomes dominant as range decreases. The initial peak is often preceded by a 'slow front,' similar to the slow front that precedes the fast transition to peak in first return stroke dE/dt and E waveforms. The overall step-field waveform duration is typically less than 1 {micro}s. The mean initial peak of dE/dt, range-normalized to 100 km, is 7.4 V m{sup -1} {micro}s{sup -1} (standard deviation (S.D.), 3.7 V m{sup -1} {micro}s{sup -1}, N = 103), the mean half-peak width is 33.5 ns (S.D., 11.9 ns, N = 69), and the mean 10-to-90% risetime is 43.6 ns (S.D., 24.2 ns, N = 69). From modeling, we determine the properties of the leader step currents which produced two typical measured field derivatives, and we use one of these currents to calculate predicted leader step E and dE/dt as a function of source range and height, the results being in good agreement with our observations. The two modeled current waveforms had maximum rates of current rise-to-peak near 100 kA {micro}s{sup -1}, peak currents in the 5-7 kA range, current half-peak widths of about 300 ns, and charge transfers of {approx}3 mC. As part of the modeling, those currents were propagated upward at 1.5 x 10{sup 8} m s{sup -1}, with their amplitudes decaying exponentially with a decay height constant of 25 m.« less

Age-related decrease in physical activity and functional fitness among elderly men and women.

PubMed

Milanović, Zoran; Pantelić, Saša; Trajković, Nebojša; Sporiš, Goran; Kostić, Radmila; James, Nic

2013-01-01

To determine differences in physical activity level and functional fitness between young elderly (60-69 years) and old elderly (70-80 years) people with the hypothesis that an age-related decline would be found. A total of 1288 participants' level of physical activity was evaluated using the International Physical Activity Questionnaire: 594 were male (mean ± standard deviation: body height 175.62 ± 9.78 cm; body weight 82.26 ± 31.33 kg) and 694 female (mean ± standard deviation: body height 165.17 ± 23.12 cm; body weight 69.74 ± 12.44 kg). Functional fitness was also estimated using the Senior Fitness Test: back scratch, chair sit and reach, 8-foot up and go, chair stand up for 30 seconds, arm curl, and 2-minute step test. Significant differences (P < 0.05) were found for all Senior Fitness tests between young elderly (60-69 years) and old elderly (70-80) men. Similar results were found for the women, except no significant differences were found for the chair sit and reach and the 2-minute step test. From the viewpoint of energy consumption estimated by the International Physical Activity Questionnaire, moderate physical activity is dominant. In addition, with aging, among men and women older than 60 years, the value of the Metabolic Equivalent of Task in total physical activity significantly reduces (P < 0.05). This study found that the reduction in physical activity level and functional fitness was equal for both men and women and was due to the aging process. These differences between young and old elderly people were due to the reduction of muscle strength in both upper and lower limbs and changes in body-fat percentage, flexibility, agility, and endurance.

Effects of In-Season Short-term Plyometric Training Program on Sprint and Jump Performance of Young Male Track Athletes.

PubMed

Chelly, Mohamed Souhaiel; Hermassi, Souhail; Shephard, Roy J

2015-08-01

We studied the effect of supplementing normal in-season training by a 10-week lower limb plyometric training program (hurdle and depth jumping), examining measures of competitive potential (peak power output [PP], sprint running velocity, squat jump [SJ], countermovement jump [CMJ], drop jump [DJ], and lower limb muscle volume). The subjects (27 male track athletes, aged 11.9 ± 1.0 years; body mass: 39.1 ± 6.1 kg; height: 1.56 ± 0.02 m; body fat: 12.8 ± 4.4%) were randomly assigned between a control (normal training) group (C; n = 13) and an experimental group (E; n = 14) who also performed plyometric training 3 times per week. A force-velocity ergometer test determined PP and SJ, and an Optojump apparatus evaluated CMJ height and DJ (height and power). A multiple-5-bound test assessed horizontal jumping, and video-camera analyses over a 40-m sprint yielded velocities for the first step (VS), the first 5 m (V5m), and between 35 and 40 m (Vmax). Leg muscle volume was estimated anthropometrically. Experimental group showed gains relative to C in SJ height (p < 0.001); CMJ height (p < 0.01); DJ height and power relative to body mass (p < 0.01 for both); and all sprint velocities (p < 0.01 for VS and V(5m, p) ≤ 0.05 for Vmax). There was also a significant increase (p < 0.01) in thigh muscle volume, but leg muscle volume, thigh cross-sectional area, and PP remained unchanged. We conclude that adding plyometric training improved important components of athletic performance relative to standard in-season training in young runners.

Automated apparatus for producing gradient gels

DOEpatents

Anderson, N.L.

1983-11-10

Apparatus for producing a gradient gel which serves as a standard medium for a two-dimensional analysis of proteins, the gel having a density gradient along its height formed by a variation in gel composition, with the apparatus including first and second pumping means each including a plurality of pumps on a common shaft and driven by a stepping motor capable of providing small incremental changes in pump outputs for the gel ingredients, the motors being controlled, by digital signals from a digital computer, a hollow form or cassette for receiving the gel composition, means for transferring the gel composition including a filler tube extending near the bottom of the cassette, adjustable horizontal and vertical arms for automatically removing and relocating the filler tube in the next cassette, and a digital computer programmed to automatically control the stepping motors, arm movements, and associated sensing operations involving the filling operation.

Automated apparatus for producing gradient gels

DOEpatents

Anderson, Norman L.

1986-01-01

Apparatus for producing a gradient gel which serves as a standard medium for a two-dimensional analysis of proteins, the gel having a density gradient along its height formed by a variation in gel composition, with the apparatus including first and second pumping means each including a plurality of pumps on a common shaft and driven by a stepping motor capable of providing small incremental changes in pump outputs for the gel ingredients, the motors being controlled, by digital signals from a digital computer, a hollow form or cassette for receiving the gel composition, means for transferring the gel composition including a filler tube extending near the bottom of the cassette, adjustable horizontal and vertical arms for automatically removing and relocating the filler tube in the next cassette, and a digital computer programmed to automatically control the stepping motors, arm movements, and associated sensing operations involving the filling operation.

Height Growth of American Sycamore in Southeastern Louisiana

Treesearch

Charles B. Briscoe; Mitchell D. Ferrill

1958-01-01

The determination of site quality is one of the early steps preceding intensive forest management; it is most commonly assessed by a total height-age relationship know as site index, with quality being expressed by the height at a chosen index age. Because an intensive review of the literature has revealed no site index curves nor yield tables for American sycamore (...

Step-induced deconstruction and step-height evolution of the Au(110) surface

NASA Astrophysics Data System (ADS)

Romahn, U.; von Blanckenhagen, P.; Kroll, C.; Göpel, W.

1993-05-01

We use temperature-dependent high-resolution low-energy electron diffraction and spot-profile analysis low-energy electron diffraction to study the Au(110) surface at room temperature up to 786 K. The experimental data were analyzed within the framework of the kinematic theory. Oscillations were determined of the positions of half order and fundamental Bragg peaks as well as of the full width at half maximum of the specular peak as a function of perpendicular momentum transfer. Evidence of mono- atomic steps occurring in the [001] direction was found below and around the (2×1)-->(1×1) transition at Tc. Above Tc, the surface gets smoother in the [001] direction; at the roughening temperature, TR, the evolution of multiple-height steps starts in both symmetry directions.

Should we consider steps with variable height for a safer stair negotiation in older adults?

PubMed

Kunzler, Marcos R; da Rocha, Emmanuel S; Dos Santos, Christielen S; Ceccon, Fernando G; Priario, Liver A; Carpes, Felipe P

2018-01-01

Effects of exercise on foot clearances are important. In older adults variations in foot clearances during walking may lead to a fall, but there is a lack of information concerning stair negotiation in older adults. Whether a condition of post exercise changes foot clearances between steps of a staircase in older adults still unknown. To determine differences in clearances when older adults negotiate different steps of a staircase before and after a session of aerobic exercise. Kinematics data from 30 older adults were acquired and the toe and heel clearances were determined for each step. Clearances were compared between the steps. Smaller clearances were found at the highest step during ascending and descending, which was not changed by exercise. Smaller clearances suggest higher risk of tripping at the top of the staircase, regardless of exercise. A smaller step at the top of a short flight of stairs could reduce chances of tripping in older adults. It suggests that steps with variable height could make stair negotiation safer in older adults. This hypothesis should be tested in further studies.

Estimating V0[subscript 2]max Using a Personalized Step Test

ERIC Educational Resources Information Center

Webb, Carrie; Vehrs, Pat R.; George, James D.; Hager, Ronald

2014-01-01

The purpose of this study was to develop a step test with a personalized step rate and step height to predict cardiorespiratory fitness in 80 college-aged males and females using the self-reported perceived functional ability scale and data collected during the step test. Multiple linear regression analysis yielded a model (R = 0.90, SEE = 3.43…

Stepped chute training wall height requirements

USDA-ARS?s Scientific Manuscript database

Stepped chutes are commonly used for overtopping protection for embankment dams. Aerated flow is commonly associated with stepped chutes if the chute has sufficient length. The aeration and turbulence of the flow can create a significant amount of splash over the training wall if not appropriately...

Observations on dam cvertopping protection: RCC stepped spillway research

USDA-ARS?s Scientific Manuscript database

Research conducted over the last decade has led to improved understanding on the design and hydraulic performance of stepped spillways applied to embankment dams for overtopping protection. This research has demonstrated that the free-surface air entrainment inception point (Li), step height to cri...

UK Renal Registry 17th Annual Report: Chapter 9 Clinical, Haematological and Biochemical Parameters in Patients Receiving Renal Replacement Therapy in Paediatric Centres in the UK in 2013: National and Centre-specific Analyses.

PubMed

Hamilton, Alexander J; Pruthi, Rishi; Maxwell, Heather; Casula, Anna; Braddon, Fiona; Inward, Carol; Lewis, Malcolm; O'Brien, Catherine; Stojanovic, Jelena; Tse, Yincent; Sinha, Manish D

2015-01-01

The Paediatric Registry analyses renal replacement therapy (RRT) data in children. All 13 UK paediatric nephrology centres submit electronic data. To provide centre specific data and to determine adherence to relevant audit standards. Data analysis to calculate summary statistics and achievement of an audit standard. The median height z-score for children on dialysis was -2.0 and for children with a functioning transplant -1.3. Children transplanted before age 11 years improved their height z score subsequently, whereas those >11 maintained their height z-score, with all transplanted patients having a similar height z-score after 3 years of starting RRT.The median weight z-score for children on dialysis was -1.2, and for children with a functioning transplant -0.2.Of those with data, 75% of the prevalent paediatric RRT population had .1 risk factors for cardiovascular disease, with 1 in 10 having all three risk factors evaluated. For transplant patients, 76% achieved the systolic blood pressure (SBP)standard and 91% achieved the haemoglobin standard. For haemodialysis patients, 53% achieved the SBP standard,66% the haemoglobin standard, 84% the calcium standard,43% the phosphate standard and 43% achieved the parathyroid hormone (PTH) standard. For peritoneal dialysis patients, 61% achieved the SBP standard, 83% the haemoglobin standard, 71% the calcium standard, 56% the phosphate standard and 36% achieved the PTH standard. Quarterly data collection will improve quality and reporting. Continued focus on improving height and avoiding obesity is needed. Awareness and management of cardiovascular risk is an important long term strategy.

Effects of Reduced Terrestrial LiDAR Point Density on High-Resolution Grain Crop Surface Models in Precision Agriculture

PubMed Central

Hämmerle, Martin; Höfle, Bernhard

2014-01-01

3D geodata play an increasingly important role in precision agriculture, e.g., for modeling in-field variations of grain crop features such as height or biomass. A common data capturing method is LiDAR, which often requires expensive equipment and produces large datasets. This study contributes to the improvement of 3D geodata capturing efficiency by assessing the effect of reduced scanning resolution on crop surface models (CSMs). The analysis is based on high-end LiDAR point clouds of grain crop fields of different varieties (rye and wheat) and nitrogen fertilization stages (100%, 50%, 10%). Lower scanning resolutions are simulated by keeping every n-th laser beam with increasing step widths n. For each iteration step, high-resolution CSMs (0.01 m2 cells) are derived and assessed regarding their coverage relative to a seamless CSM derived from the original point cloud, standard deviation of elevation and mean elevation. Reducing the resolution to, e.g., 25% still leads to a coverage of >90% and a mean CSM elevation of >96% of measured crop height. CSM types (maximum elevation or 90th-percentile elevation) react differently to reduced scanning resolutions in different crops (variety, density). The results can help to assess the trade-off between CSM quality and minimum requirements regarding equipment and capturing set-up. PMID:25521383

Quantum vacuum emission from a refractive-index front

NASA Astrophysics Data System (ADS)

Jacquet, Maxime; König, Friedrich

2015-08-01

A moving boundary separating two otherwise homogeneous regions of a dielectric is known to emit radiation from the quantum vacuum. An analytical framework based on the Hopfield model, describing a moving refractive-index step in 1 +1 dimensions for realistic dispersive media has been developed by S. Finazzi and I. Carusotto [Phys. Rev. A 87, 023803 (2013)], 10.1103/PhysRevA.87.023803. We expand the use of this model to calculate explicitly spectra of all modes of positive and negative norms. Furthermore, for lower step heights we obtain a unique set of mode configurations encompassing black-hole and white-hole setups. This leads to a realistic emission spectrum featuring black-hole and white-hole emission for different frequencies. We also present spectra as measured in the laboratory frame that include all modes, in particular a dominant negative-norm mode, which is the partner mode in any Hawking-type emission. We find that the emission spectrum is highly structured into intervals of emission with black-hole, white-hole, and no horizons. Finally, we estimate the number of photons emitted as a function of the step height and find a power law of 2.5 for low step heights.

Final height in survivors of childhood cancer compared with Height Standard Deviation Scores at diagnosis.

PubMed

Knijnenburg, S L; Raemaekers, S; van den Berg, H; van Dijk, I W E M; Lieverst, J A; van der Pal, H J; Jaspers, M W M; Caron, H N; Kremer, L C; van Santen, H M

2013-04-01

Our study aimed to evaluate final height in a cohort of Dutch childhood cancer survivors (CCS) and assess possible determinants of final height, including height at diagnosis. We calculated standard deviation scores (SDS) for height at initial cancer diagnosis and height in adulthood in a cohort of 573 CCS. Multivariable regression analyses were carried out to estimate the influence of different determinants on height SDS at follow-up. Overall, survivors had a normal height SDS at cancer diagnosis. However, at follow-up in adulthood, 8.9% had a height ≤-2 SDS. Height SDS at diagnosis was an important determinant for adult height SDS. Children treated with (higher doses of) radiotherapy showed significantly reduced final height SDS. Survivors treated with total body irradiation (TBI) and craniospinal radiation had the greatest loss in height (-1.56 and -1.37 SDS, respectively). Younger age at diagnosis contributed negatively to final height. Height at diagnosis was an important determinant for height SDS at follow-up. Survivors treated with TBI, cranial and craniospinal irradiation should be monitored periodically for adequate linear growth, to enable treatment on time if necessary. For correct interpretation of treatment-related late effects studies in CCS, pre-treatment data should always be included.

Estimated splash and training wall height requirements for stepped chutes applied to embankment dams

USDA-ARS?s Scientific Manuscript database

Aging embankment dams are commonly plagued with insufficient spillway capacity. To provide increased spillway capacity, stepped chutes are frequently applied as an overtopping protection system for embankment dams. Stepped chutes with sufficient length develops aerated flow. The aeration and flow...

Inferring the economic standard of living and health from cohort height: Evidence from modern populations in developing countries.

PubMed

Akachi, Yoko; Canning, David

2015-12-01

Average adult height is a physical measure of the biological standard of living of a population. While the biological and economic standards of living of a population are very different concepts, they are linked and may empirically move together. If this is so, then cohort heights can also be used to make inferences about the economic standard of living and health of a population when other data are not available. We investigate how informative this approach is in terms of inferring income, nutrition, and mortality using data on heights from developing countries over the last 50 years for female cohorts born 1951-1992. We find no evidence that the absolute differences in adult height across countries are associated with different economic living standards. Within countries, however, faster increases in adult cohort height over time are associated with more rapid growth of GDP per capita, life expectancy, and nutritional intake. Using our instrumental variable approach, each centimeter gain in height is associated with a 6% increase in income per capita, a reduction in infant mortality of 7 per thousand (or an 1.25 year increase in life expectancy), and an increase in nutrition of 64 calories and 2 grams of protein per person per day relative to the global trend. We find that increases in cohort height can predict increases in income even for countries not used in the estimation of the relationship. This suggests our approach has predictive power out of sample for countries where we lack income and health data. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oyunbaatar, Nomin-Erdene; Choi, Young Soo; Lee, Dong-Weon, E-mail: mems@jnu.ac.kr

This paper describes a self-adjustable four-point probe (S4PP) system with a square configuration. The S4PP system consists of 3D polymer coil springs for the independent operation of each tungsten (W) probe, microfluidic channels filled with a nontoxic liquid metal, and a LabView-based control system. The 3D coil springs made by PMMA are fabricated with a 3D printer and are positioned in a small container filled with the non-toxic liquid metal. This unique configuration allows independent self-adjustment of the probe heights for precise measurements of the electrical properties of both flexible and large-step-height microsamples. The feasibility of the fabricated S4PP systemmore » is evaluated by measuring the specific resistance of Cr and Au thin films deposited on silicon wafers. The system is then employed to evaluate the electrical properties of a Au thin film deposited onto a flexible and easily breakable silicon diaphragm (spring constant: ∼3.6 × 10{sup −5} N/m). The resistance of the Cr thin films (thickness: 450 nm) with step heights of 60 and 90 μm is also successfully characterized. These experimental results indicate that the proposed S4PP system can be applied to common metals and semiconductors as well as flexible and large-step-height samples.« less

Closure to "Estimated Splash and Training Wall Height Requirements for Stepped Chutes Applied to Embankment Dams" by Sherry L. Hunt and Kem C. Kadavy

USDA-ARS?s Scientific Manuscript database

Researchers from Hohai University in Nanjing, China compared stepped chute research conducted in physical models of narrow stepped chutes to research conducted by scientists at the USDA-ARS Hydraulic Engineering Research Unit (HERU) in a physical model of a wide stepped chute. Researchers from Hoha...

Steps in Solution Growth: Revised Gibbs-Thomson Law, Turbulence and Morphological Stability

NASA Technical Reports Server (NTRS)

Chernov, A. A.; Rashkovich, L. N.; Vekilov, P. G.

2004-01-01

Two groups of new phenomena revealed by AFM and high resolution optical interferometry on crystal faces growing from solutions will be discussed. 1. Spacing between strongly polygonized spiral steps with low less than 10(exp -2) kink density on lysozyme and K- biphtalate do not follow the Burton-cabrera-Frank theory. The critical length of the yet immobile first Short step segment adjacent to a pinning defect (dislocation, stacking fault) is many times longer than that following from the step free energy. The low-kink density steps are typical of many growth conditions and materials, including low temperature gas phase epitaxy and MBE. 2. The step bunching pattern on the approx. 1 cm long { 110) KDP face growing from the turbulent solution flow (Re (triple bonds) 10(exp 4), solution flow rate approx. 1 m/s) suggests that the step bunch height does not increase infinitely as the bunch path on the crystal face rises, as is usually observed on large KDP crystals. The mechanism controlling the maximal bunch width and height is based on the drag of the solution depleted by the step bunch down thc solution stream. It includes splitting, coagulation and interlacing of bunches

Walk Ratio (Step Length/Cadence) as a Summary Index of Neuromotor Control of Gait: Application to Multiple Sclerosis

ERIC Educational Resources Information Center

Rota, Viviana; Perucca, Laura; Simone, Anna; Tesio, Luigi

2011-01-01

In healthy adults, the step length/cadence ratio [walk ratio (WR) in mm/(steps/min) and normalized for height] is known to be constant around 6.5 mm/(step/min). It is a speed-independent index of the overall neuromotor gait control, in as much as it reflects energy expenditure, balance, between-step variability, and attentional demand. The speed…

Tree value conversion standards revisited

Treesearch

Paul S. DeBald; Martin E. Dale; Martin E. Dale

1991-01-01

Updated tree value conversion standards (TVCS) are presented for 12 important hardwood species of the oak-hickory forest. These updated standards-developed for each species by butt-log grade, merchantable height, and diameter at breast height-reflect the changes in lumber prices and in conversion costs which have occurred since 1976 when the original TVCS were...

Clinical longitudinal standards for height, weight, height velocity, weight velocity, and stages of puberty.

PubMed Central

Tanner, J M; Whitehouse, R H

1976-01-01

New charts for height, weight, height velocity, and weight velocity are presented for clinical (as opposed to population survey) use. They are based on longitudinal-type growth curves, using the same data as in the British 1965 growth standards. In the velocity standards centiles are given for children who are early- and late-maturing as well as for those who mature at the average age (thus extending the use of the previous charts). Limits of normality for the age of occurrence of the adolescent growth spurt are given and also for the successive stages of penis, testes, and pubic hair development in boys, and for stages of breast and pubic hair development in girls. PMID:952550

An experimental comparison of standard stereo matching algorithms applied to cloud top height estimation from satellite IR images

NASA Astrophysics Data System (ADS)

Anzalone, Anna; Isgrò, Francesco

2016-10-01

The JEM-EUSO (Japanese Experiment Module-Extreme Universe Space Observatory) telescope will measure Ultra High Energy Cosmic Ray properties by detecting the UV fluorescent light generated in the interaction between cosmic rays and the atmosphere. Cloud information is crucial for a proper interpretation of these data. The problem of recovering the cloud-top height from satellite images in infrared has struck some attention over the last few decades, as a valuable tool for the atmospheric monitoring. A number of radiative methods do exist, like C02 slicing and Split Window algorithms, using one or more infrared bands. A different way to tackle the problem is, when possible, to exploit the availability of multiple views, and recover the cloud top height through stereo imaging and triangulation. A crucial step in the 3D reconstruction is the process that attempts to match a characteristic point or features selected in one image, with one of those detected in the second image. In this article the performance of a group matching algorithms that include both area-based and global techniques, has been tested. They are applied to stereo pairs of satellite IR images with the final aim of evaluating the cloud top height. Cloudy images from SEVIRI on the geostationary Meteosat Second Generation 9 and 10 (MSG-2, MSG-3) have been selected. After having applied to the cloudy scenes the algorithms for stereo matching, the outcoming maps of disparity are transformed in depth maps according to the geometry of the reference data system. As ground truth we have used the height maps provided by the database of MODIS (Moderate Resolution Imaging Spectroradiometer) on-board Terra/Aqua polar satellites, that contains images quasi-synchronous to the imaging provided by MSG.

Patient's Height and Hip Medial Offset Are the Main Determinants of the Valgus Cut Angle During Total Knee Arthroplasty.

PubMed

Drexler, Michael; Abolghasemian, Mansour; Barbuto, Richard; Naini, Mohsen S; Voshmeh, Neda; Rutenberg, Tal F; Schwarzkopf, Ran; Backstein, David J

2017-05-01

Valgus cut angle (VCA), defined as the angle between the anatomical and the mechanical axes of femur, is an important parameter upon which a critical step of knee arthroplasty is based. Some variables have been proposed to affect the magnitude of this cut. However, little information is available regarding whether a generic value can be used, or if a patient-specific value from a long leg X-ray, or factors that can be determined preoperatively, is necessary to accurately set the VCA. Standard standing 3-joint views were used to measure a number of anatomical measurements in 358 limbs, 202 patients (116 women, 86 men). Neck-shaft angle, medial offset, femoral length (FL), distal femoral articular angle, and VCA were measured. Demographic data including gender and height were extracted from hospital charts. The correlation of VCA with each of the other factors was evaluated using linear regression and t-test and finally multivariate analysis. The average VCA was 5.76° (range 4-8). Gender and distal femoral articular angle were not related to VCA (P = .343 and .995). FL was found to be a function of height with similar effects on multivariate analysis. Only the height (or FL) and femoral offset were identified as independent factors, with a negative correlation for the former (P < .001) and a positive correlation for the latter (P < .001). Femoral offset and height are the 2 independent factors determining VCA. Other parameters are indirectly related to these 2 factors. Tall patients with a small femoral offset have smaller VCA and short patients with a large offset have larger VCA. The wide variety of VCA values does not support using a generic value for all patients during knee arthroplasty. Copyright © 2016 Elsevier Inc. All rights reserved.

Measurement of lung volumes from supine portable chest radiographs.

PubMed

Ries, A L; Clausen, J L; Friedman, P J

1979-12-01

Lung volumes in supine nonambulatory patients are physiological parameters often difficult to measure with current techniques (plethysmograph, gas dilution). Existing radiographic methods for measuring lung volumes require standard upright chest radiographs. Accordingly, in 31 normal supine adults, we determined helium-dilution functional residual and total lung capacities and measured planimetric lung field areas (LFA) from corresponding portable anteroposterior and lateral radiographs. Low radiation dose methods, which delivered less than 10% of that from standard portable X-ray technique, were utilized. Correlation between lung volume and radiographic LFA was highly significant (r = 0.96, SEE = 10.6%). Multiple-step regressions using height and chest diameter correction factors reduced variance, but weight and radiographic magnification factors did not. In 17 additional subjects studied for validation, the regression equations accurately predicted radiographic lung volume. Thus, this technique can provide accurate and rapid measurement of lung volume in studies involving supine patients.

The impact of growth hormone therapy on adult height in noonan syndrome: a systematic review.

PubMed

Giacomozzi, Claudio; Deodati, Annalisa; Shaikh, Mohamad Guftar; Ahmed, Syed Faisal; Cianfarani, Stefano

2015-01-01

Recombinant human growth hormone (rhGH) is being used to promote linear growth in short children with Noonan syndrome. However, its efficacy is still controversial. To systematically determine the impact of rhGH therapy on adult height in children with Noonan syndrome. We searched the Cochrane Central Register of Controlled Trials, ISI Web of Science, MEDLINE, and the bibliographic references from all retrieved articles published until April 2014. Studies reporting adult/near-adult height in children with Noonan syndrome treated with rhGH or reporting at least a 3-year follow-up were analysed. Quality and strength of recommendation were assessed according to the Endocrine Society criteria. No controlled trials reporting adult height were available. Five studies were identified reporting adult height or near adult height. Data comparison showed inter-individual variability in the response to rhGH, mean height gain standard deviation score ranging between 0.6 and 1.4 according to national standards, and between 0.6 and 2 according to Noonan standards. Significant biases affected all the studies. High-quality controlled trials on the impact of rhGH therapy on adult height are lacking, and the robustness of available data is not sufficient to recommend such therapy in children with Noonan syndrome. © 2015 S. Karger AG, Basel.

The use of copulas to practical estimation of multivariate stochastic differential equation mixed effects models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rupšys, P.

A system of stochastic differential equations (SDE) with mixed-effects parameters and multivariate normal copula density function were used to develop tree height model for Scots pine trees in Lithuania. A two-step maximum likelihood parameter estimation method is used and computational guidelines are given. After fitting the conditional probability density functions to outside bark diameter at breast height, and total tree height, a bivariate normal copula distribution model was constructed. Predictions from the mixed-effects parameters SDE tree height model calculated during this research were compared to the regression tree height equations. The results are implemented in the symbolic computational language MAPLE.

14 CFR 77.17 - Obstruction standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... feet vertical distance. (2) 15 feet for any other public roadway. (3) 10 feet or the height of the... greater height than any of the following heights or surfaces: (1) A height of 499 feet AGL at the site of the object. (2) A height that is 200 feet AGL, or above the established airport elevation, whichever...

14 CFR 77.17 - Obstruction standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... feet vertical distance. (2) 15 feet for any other public roadway. (3) 10 feet or the height of the... greater height than any of the following heights or surfaces: (1) A height of 499 feet AGL at the site of the object. (2) A height that is 200 feet AGL, or above the established airport elevation, whichever...

Physiological consequences of height-related morphological variation in Sequoia sempervirens foliage.

PubMed

Mullin, Lucy P; Sillett, Stephen C; Koch, George W; Tu, Kevin P; Antoine, Marie E

2009-08-01

This study examined relationships between foliar morphology and gas exchange characteristics as they vary with height within and among crowns of Sequoia sempervirens D. Don trees ranging from 29 to 113 m in height. Shoot mass:area (SMA) ratio increased with height and was less responsive to changes in light availability as height increased, suggesting a transition from light to water relations as the primary determinant of morphology with increasing height. Mass-based rates of maximum photosynthesis (A(max,m)), standardized photosynthesis (A(std,m)) and internal CO(2) conductance (g(i,m)) decreased with height and SMA, while the light compensation point, light saturation point, and mass and area-based rates of dark respiration (R(m)) increased with height and SMA. Among foliage from different heights, much of the variation in standardized photosynthesis was explained by variation in g(i,) consistent with increasing limitation of photosynthesis by internal conductance in foliage with higher SMA. The syndrome of lower internal and stomatal conductance to CO(2) and higher respiration may contribute to reductions in upper crown growth efficiency with increasing height in S. sempervirens trees.

Analysis of the chronic lower limb injuries occurrence in step aerobic instructors in relation to their working step class profile: a three year longitudinal prospective study.

PubMed

Malliou, P; Rokka, S; Beneka, A; Gioftsidou, A; Mavromoustakos, S; Godolias, G

2014-01-01

There is limited information on injury patterns in Step Aerobic Instructors (SAI) who exclusively execute "step" aerobic classes. To record the type and the anatomical position in relation to diagnosis of muscular skeletal injuries in step aerobic instructors. Also, to analyse the days of absence due to chronic injury in relation to weekly working hours, height of the step platform, working experience and working surface and footwear during the step class. The Step Aerobic Instructors Injuries Questionnaire was developed, and then validity and reliability indices were calculated. 63 SAI completed the questionnaire. For the statistical analysis of the data, the method used was the analysis of frequencies, the non-parametric test χ^{2} (chi square distribution), correlation and linear and logistic regressions analysis from the SPSS statistical package. 63 SAI reported 115 injuries that required more than 2 days absence from step aerobic classes. The chronic lower extremity injuries were 73.5%, with the leg pain, the anterior knee pain, the plantar tendinopathy and the Achilles tendinopathy being most common overuse syndromes. The working hours, the platform height, the years of aerobic dance seem to affect the days of absence due to chronic lower limb injury occurrence in SAI.

Motion of the center of gravity of the body in clinical evaluation of gait.

PubMed

Tesio, L; Civaschi, P; Tessari, L

1985-04-01

The motion of the center of gravity during walking was analyzed in five hemiplegic subjects and eleven subjects affected by unilateral hip arthritis. In the hemiplegic subjects and 6 subjects with hip arthritis the transfer between kinetic and potential energy (with a passive pendular motion) was found to be 9-95% greater during the step performed on the affected limb ("pathological" step); as a consequence, the muscular work done during this step was 7-81% of the work done during the step performed on the second limb ("normal" step). Qualitatively similar gait anomalies were recorded in all hemiplegic subjects with hypertonus of the paretic limb: these subjects had to lift the spastic limb as a whole during the normal step, with the consequence that the center of gravity was lifted 0.6-3 cm more than during the pathological step. In contrast, various motor patterns were found in patients with hip arthritis. During the pathological step the center of gravity reached a height 0.5-3 cm greater in 7 subjects, 1 cm smaller in one subject, and about the same height reached during the normal step in 3 subjects. This was consistent with the various motor deficits caused by hip arthritis.

Simultaneous determination of azathioprine and 6-mercaptopurine by high-performance liquid chromatography.

PubMed

Van Os, E C; McKinney, J A; Zins, B J; Mays, D C; Schriver, Z H; Sandborn, W J; Lipsky, J J

1996-04-26

A specific, sensitive, single-step solid-phase extraction and reversed-phase high-performance liquid chromatographic method for the simultaneous determination of plasma 6-mercaptopurine and azathioprine concentrations is reported. Following solid-phase extraction, analytes are separated on a C18 column with mobile phase consisting of 0.8% acetonitrile in 1 mM triethylamine, pH 3.2, run on a gradient system. Quantitation limits were 5 ng/ml and 2 ng/ml for azathioprine and 6-mercaptopurine, respectively. Peak heights correlated linearly to known extracted standards for 6-mercaptopurine and azathioprine (r = 0.999) over a range of 2-200 ng/ml. No chromatographic interferences were detected.

Determination of cadmium in sewage sludge by differential pulse anodic stripping voltammetry.

PubMed

Pacer, R A; Scott Ellis, C K; Peng, R

1999-07-12

A procedure was developed for the determination of cadmium in sewage sludge by differential pulse anodic stripping voltammetry. A sodium peroxide fusion carried out in zirconium crucibles was found to give satisfactory results, based on analysis of standard reference materials. Samples collected from the municipal sludge lagoon in Fort Wayne, Indiana were found to have cadmium abundances ranging from 120 to 250 ppm, with most samples falling in the 120 to 170 ppm range. Interference from zinc is easily eliminated by carrying out the deposition step at -0.95 V vs. Ag/AgCl. Lead-to-cadmium ratios as high as 50:1 (ppm basis) have no effect on the height of the cadmium peak.

Linear programming phase unwrapping for dual-wavelength digital holography.

PubMed

Wang, Zhaomin; Jiao, Jiannan; Qu, Weijuan; Yang, Fang; Li, Hongru; Tian, Ailing; Asundi, Anand

2017-01-20

A linear programming phase unwrapping method in dual-wavelength digital holography is proposed and verified experimentally. The proposed method uses the square of height difference as a convergence standard and theoretically gives the boundary condition in a searching process. A simulation was performed by unwrapping step structures at different levels of Gaussian noise. As a result, our method is capable of recovering the discontinuities accurately. It is robust and straightforward. In the experiment, a microelectromechanical systems sample and a cylindrical lens were measured separately. The testing results were in good agreement with true values. Moreover, the proposed method is applicable not only in digital holography but also in other dual-wavelength interferometric techniques.

SETs: stand evaluation tools: II. tree value conversion standards for hardwood sawtimber

Treesearch

Joseph J. Mendel; Paul S. DeBald; Martin E. Dale

1976-01-01

Tree quatity index tables are presented for 12 important hardwood species of the oak-hickory forest. From these, tree value conversion standards are developed for each species, log grade, merchantable height, and diameter at breast height. The method of calculating tree value conversion standards and adapting them to different conditions is explained. A computer...

47 CFR 101.125 - Temporary fixed antenna height restrictions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the Local...

47 CFR 101.125 - Temporary fixed antenna height restrictions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the Local...

47 CFR 101.125 - Temporary fixed antenna height restrictions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the Local...

47 CFR 101.125 - Temporary fixed antenna height restrictions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the Local...

47 CFR 101.125 - Temporary fixed antenna height restrictions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the Local...

Booster seat use by children aged 4-11 years: evidence of the need to revise current Australasian standards to accommodate overweight children.

PubMed

Fitzharris, Michael P; Charlton, Judith; Bohensky, Megan; Koppel, Sjaanie; Fildes, Brian

2008-03-17

To examine the relationship between child weight and vehicle booster seat usage in the context of current Australasian booster seat standards. Questionnaire survey conducted between February and April 2005. A convenience sample of parents with children aged 4-11 years in New South Wales and Victoria completed a questionnaire, reporting on the height and weight of their children and the nature of restraint devices used in the family vehicle. Proportion of children meeting standard-specified weight and height criteria who are not restrained in booster seats; proportion of children who meet the specified height criteria but whose weight exceeds the specified weight. 699 of 3959 questionnaires were returned (response rate, 18%), of which seven lacked essential details. The remaining 692 responses provided information on 1500 children. Of these children, 633 aged 4-11 years fell within the recommended height range for using booster seats, but only 29% were typically restrained in booster seats, the majority (70%) being restrained in normal seatbelts. A key finding was that 37% of the children who met the recommended height criteria exceeded the maximum weight for booster seats stipulated by the current Australasian safety standard. In view of increasing rates of overweight and obesity in children, it is important to reassess current Australasian standards for child restraints in vehicles. A concerted parental education campaign is also needed to raise awareness of which restraint types are appropriate for children of various heights and weights.

How do prosthetic stiffness, height and running speed affect the biomechanics of athletes with bilateral transtibial amputations?

PubMed Central

Taboga, Paolo; Grabowski, Alena M.

2017-01-01

Limited available information describes how running-specific prostheses and running speed affect the biomechanics of athletes with bilateral transtibial amputations. Accordingly, we quantified the effects of prosthetic stiffness, height and speed on the biomechanics of five athletes with bilateral transtibial amputations during treadmill running. Each athlete performed a set of running trials with 15 different prosthetic model, stiffness and height combinations. Each set of trials began with the athlete running on a force-measuring treadmill at 3 m s−1, subsequent trials incremented by 1 m s−1 until they achieved their fastest attainable speed. We collected ground reaction forces (GRFs) during each trial. Prosthetic stiffness, height and running speed each affected biomechanics. Specifically, with stiffer prostheses, athletes exhibited greater peak and stance average vertical GRFs (β = 0.03; p < 0.001), increased overall leg stiffness (β = 0.21; p < 0.001), decreased ground contact time (β = −0.07; p < 0.001) and increased step frequency (β = 0.042; p < 0.001). Prosthetic height inversely associated with step frequency (β = −0.021; p < 0.001). Running speed inversely associated with leg stiffness (β = −0.58; p < 0.001). Moreover, at faster running speeds, the effect of prosthetic stiffness and height on biomechanics was mitigated and unchanged, respectively. Thus, prosthetic stiffness, but not height, likely influences distance running performance more than sprinting performance for athletes with bilateral transtibial amputations. PMID:28659414

How do prosthetic stiffness, height and running speed affect the biomechanics of athletes with bilateral transtibial amputations?

PubMed

Beck, Owen N; Taboga, Paolo; Grabowski, Alena M

2017-06-01

Limited available information describes how running-specific prostheses and running speed affect the biomechanics of athletes with bilateral transtibial amputations. Accordingly, we quantified the effects of prosthetic stiffness, height and speed on the biomechanics of five athletes with bilateral transtibial amputations during treadmill running. Each athlete performed a set of running trials with 15 different prosthetic model, stiffness and height combinations. Each set of trials began with the athlete running on a force-measuring treadmill at 3 m s -1 , subsequent trials incremented by 1 m s -1 until they achieved their fastest attainable speed. We collected ground reaction forces (GRFs) during each trial. Prosthetic stiffness, height and running speed each affected biomechanics. Specifically, with stiffer prostheses, athletes exhibited greater peak and stance average vertical GRFs ( β = 0.03; p < 0.001), increased overall leg stiffness ( β = 0.21; p < 0.001), decreased ground contact time ( β = -0.07; p < 0.001) and increased step frequency ( β = 0.042; p < 0.001). Prosthetic height inversely associated with step frequency ( β = -0.021; p < 0.001). Running speed inversely associated with leg stiffness ( β = -0.58; p < 0.001). Moreover, at faster running speeds, the effect of prosthetic stiffness and height on biomechanics was mitigated and unchanged, respectively. Thus, prosthetic stiffness, but not height, likely influences distance running performance more than sprinting performance for athletes with bilateral transtibial amputations. © 2017 The Author(s).

Determining suitable dimensions for dairy goat feeding places by evaluating body posture and feeding reach.

PubMed

Keil, Nina M; Pommereau, Marc; Patt, Antonia; Wechsler, Beat; Gygax, Lorenz

2017-02-01

Confined goats spend a substantial part of the day feeding. A poorly designed feeding place increases the risk of feeding in nonphysiological body postures, and even injury. Scientifically validated information on suitable dimensions of feeding places for loose-housed goats is almost absent from the literature. The aim of the present study was, therefore, to determine feeding place dimensions that would allow goats to feed in a species-appropriate, relaxed body posture. A total of 27 goats with a height at the withers of 62 to 80 cm were included in the study. Goats were tested individually in an experimental feeding stall that allowed the height difference between the feed table, the standing area of the forelegs, and a feeding area step (difference in height between forelegs and hind legs) to be varied. The goats accessed the feed table via a palisade feeding barrier. The feed table was equipped with recesses at varying distances to the feeding barrier (5-55 cm in 5-cm steps) at angles of 30°, 60°, 90°, 120°, or 150° (feeding angle), which were filled with the goats' preferred food. In 18 trials, balanced for order across animals, each animal underwent all possible combinations of feeding area step (3 levels: 0, 10, and 20 cm) and of difference in height between feed table and standing area of forelegs (6 levels: 0, 5, 10, 15, 20, and 25 cm). The minimum and maximum reach at which the animals could reach feed on the table with a relaxed body posture was determined for each combination. Statistical analysis was performed using mixed-effects models. The animals were able to feed with a relaxed posture when the feed table was at least 10 cm higher than the standing height of the goats' forelegs. Larger goats achieved smaller minimum reaches and minimum reach increased if the goats' head and neck were angled. Maximum reach increased with increasing height at withers and height of the feed table. The presence of a feeding area step had no influence on minimum and maximum reach. Based on these results, the goats' feeding place can be designed to ensure that the animals are able to reach all of the feed in the manger or on the feed table with a relaxed posture, thus avoiding injuries and nonphysiological stress on joints and hooves. A feeding area step up to a maximum of 20 cm need not be taken into account in terms of feeding reach. However, the feed table must be raised at least 10 cm above the standing area to allow the goats to feed in a species-appropriate, relaxed posture. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Growth assessment in diagnosis of Fetal Growth Restriction. Review

PubMed Central

Albu, AR; Horhoianu, IA; Dumitrascu, MC; Horhoianu, V

2014-01-01

Abstract The assessment of fetal growth represents a fundamental step towards the identification of the true growth restricted fetus that is associated to important perinatal morbidity and mortality. The possible ways of detecting abnormal fetal growth are taken into consideration in this review and their strong and weak points are discussed. An important debate still remains about how to discriminate between the physiologically small fetus that does not require special surveillance and the truly growth restricted fetus who is predisposed to perinatal complications, even if its parameters are above the cut-off limits established. In this article, we present the clinical tools of fetal growth assessment: Symphyseal-Fundal Height (SFH) measurement, the fetal ultrasound parameters widely taken into consideration when discussing fetal growth: Abdominal Circumference (AC) and Estimated Fetal Weight (EFW); several types of growth charts and their characteristics: populational growth charts, standard growth charts, individualized growth charts, customized growth charts and growth trajectories. Abbreviations: FGR = Fetal growth restriction; IUGR = Intrauterine Growth Restriction; SGA = small for gestational age fetus; EFW = estimated fetal weight; AC = abdominal circumference; SD = Standard Deviation; SFH = Symphyseal-fundal height; US = ultrasound; 2D = bidimensional; 3D = tridimensional; RCOG = Royal College of Obstetricians and Gynecologists; FL = femur length; BPD = biparietal diameter; BW = birth weight; IGA = Individualized Growth Assessment; PIH = Pregnancy Induced hypertension; PE = Preeclampsia; NICU = Neonatal Intensive Care Unit. PMID:25408718

MEMS Calculator

National Institute of Standards and Technology Data Gateway

SRD 166 MEMS Calculator (Web, free access)   This MEMS Calculator determines the following thin film properties from data taken with an optical interferometer or comparable instrument: a) residual strain from fixed-fixed beams, b) strain gradient from cantilevers, c) step heights or thicknesses from step-height test structures, and d) in-plane lengths or deflections. Then, residual stress and stress gradient calculations can be made after an optical vibrometer or comparable instrument is used to obtain Young's modulus from resonating cantilevers or fixed-fixed beams. In addition, wafer bond strength is determined from micro-chevron test structures using a material test machine.

14 CFR 29.87 - Height-velocity envelope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Category A engine isolation requirements, the height-velocity envelope for complete power failure must be... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Height-velocity envelope. 29.87 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight Performance § 29.87 Height-velocity envelope. (a...

Multi-step Variable Height Photolithography for Valved Multilayer Microfluidic Devices.

PubMed

Brower, Kara; White, Adam K; Fordyce, Polly M

2017-01-27

Microfluidic systems have enabled powerful new approaches to high-throughput biochemical and biological analysis. However, there remains a barrier to entry for non-specialists who would benefit greatly from the ability to develop their own microfluidic devices to address research questions. Particularly lacking has been the open dissemination of protocols related to photolithography, a key step in the development of a replica mold for the manufacture of polydimethylsiloxane (PDMS) devices. While the fabrication of single height silicon masters has been explored extensively in literature, fabrication steps for more complicated photolithography features necessary for many interesting device functionalities (such as feature rounding to make valve structures, multi-height single-mold patterning, or high aspect ratio definition) are often not explicitly outlined. Here, we provide a complete protocol for making multilayer microfluidic devices with valves and complex multi-height geometries, tunable for any application. These fabrication procedures are presented in the context of a microfluidic hydrogel bead synthesizer and demonstrate the production of droplets containing polyethylene glycol (PEG diacrylate) and a photoinitiator that can be polymerized into solid beads. This protocol and accompanying discussion provide a foundation of design principles and fabrication methods that enables development of a wide variety of microfluidic devices. The details included here should allow non-specialists to design and fabricate novel devices, thereby bringing a host of recently developed technologies to their most exciting applications in biological laboratories.

Developmental steps of the human cervical spine: parameters for evaluation of skeletal maturation stages.

PubMed

dos Santos, Marcos Fabio Henriques; de Lima, Rodrigo Lopes; De-Ary-Pires, Bernardo; Pires-Neto, Mário Ary; de Ary-Pires, Ricardo

2010-06-01

The central objective of this investigation was to focus on the development of the cervical spine observed by lateral cephalometric radiological images of children and adolescents (6-16 years old). A sample of 26 individuals (12 girls and 14 boys) was classified according to stages of cervical spine maturation in two subcategories: group I (initiation phase) and group II (acceleration phase). The morphology of the cervical spine was assessed by lateral cephalometric radiographs obtained in accordance with an innovative method for establishing a standardized head posture. A total of 29 linear variables and 5 angular variables were used to clarify the dimensions of the cervical vertebrae. The results suggest that a few measurements can be used as parameters of vertebral maturation both for males and females. The aforementioned measurements include the inferior depth of C2-C4, the inferior depth of C5, the anterior height of C4-C5, and the posterior height of C5. We propose original morphological parameters that may prove remarkably useful in the determination of bone maturational stages of the cervical spine in children and adolescents.

Adult height in patients with familial male-limited precocious puberty and the role of an aromatase inhibitor in patient management.

PubMed

Lane, Laura C; Flowers, Josephine; Johnstone, Helen; Cheetham, Tim

2018-04-25

There is little adult height data in patients with familial male-limited precocious puberty (FMPP) and no management consensus. We assessed the treatment and adult height in local patients with FMPP and those reported in the literature. Growth data were obtained on four local patients with FMPP and a search performed to obtain management details and adult height data on cases in the literature. UK (90) population standards were used to calculate standard deviation scores (SDS). Adult height data were available on 25 men with FMPP of whom 21 were treated. Median adult height SDS of patients was -1.5 SD with a mid-parental target of -0.6 SD (p=0.1). Eight patients (32%) had an adult height above the mid-parental target and seven patients (28%) had a height >2 SD below the mean. The median height SD was -0.03 in untreated patients and +0.5 SD in those receiving an aromatase inhibitor. There was no relationship between height and age at presentation. Aromatase inhibitor therapy is associated with a positive height outcome in FMPP but the outcome with and without intervention is unpredictable. Clinicians need to be cautious when counselling families about the potential height outcome in FMPP.

Stability diagrams for the surface patterns of GaN(0001bar) as a function of Schwoebel barrier height

NASA Astrophysics Data System (ADS)

Krzyżewski, Filip; Załuska-Kotur, Magdalena A.

2017-01-01

Height and type of Schwoebel barriers (direct or inverse) decides about the character of the surface instability. Different surface morphologies are presented. Step bunches, double steps, meanders, mounds and irregular patterns emerge at the surface as a result of step (Schwoebel) barriers at some temperature or miscut values. The study was carried out on the two-component kinetic Monte Carlo (kMC) model of GaN(0001bar) surface grown in nitrogen rich conditions. Diffusion of gallium adatoms over N-polar surface is slow and nitrogen adatoms are almost immobile. We show that in such conditions surfaces remain smooth when gallium adatoms diffuse in the presence of low inverse Schwoebel barrier. It is illustrated by adequate stability diagrams for surface morphologies.

Step edge influence on barrier height and contact area in vertical heterojunctions between epitaxial graphene and n-type 4H-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tadjer, M. J., E-mail: marko.tadjer.ctr@nrl.navy.mil; Nyakiti, L. O.; Robinson, Z.

2014-02-17

Vertical rectifying contacts of epitaxial graphene grown by Si sublimation on the Si-face of 4H-SiC epilayers were investigated. Forward bias preferential conduction through the step edges was correlated by linear current density normalization. This phenomenon was observed on samples with 2.7–5.8 monolayers of epitaxial graphene as determined by X-ray photoelectron spectroscopy. A modified Richardson plot was implemented to extract the barrier height (0.81 eV at 290 K, 0.99 eV at 30 K) and the electrically dominant SiC step length of a Ti/Al contact overlapping a known region of approximately 0.52 μm wide SiC terraces.

Aerodynamic Parameters of a UK City Derived from Morphological Data

NASA Astrophysics Data System (ADS)

Millward-Hopkins, J. T.; Tomlin, A. S.; Ma, L.; Ingham, D. B.; Pourkashanian, M.

2013-03-01

Detailed three-dimensional building data and a morphometric model are used to estimate the aerodynamic roughness length z 0 and displacement height d over a major UK city (Leeds). Firstly, using an adaptive grid, the city is divided into neighbourhood regions that are each of a relatively consistent geometry throughout. Secondly, for each neighbourhood, a number of geometric parameters are calculated. Finally, these are used as input into a morphometric model that considers the influence of height variability to predict aerodynamic roughness length and displacement height. Predictions are compared with estimations made using standard tables of aerodynamic parameters. The comparison suggests that the accuracy of plan-area-density based tables is likely to be limited, and that height-based tables of aerodynamic parameters may be more accurate for UK cities. The displacement heights in the standard tables are shown to be lower than the current predictions. The importance of geometric details in determining z 0 and d is then explored. Height variability is observed to greatly increase the predicted values. However, building footprint shape only has a significant influence upon the predictions when height variability is not considered. Finally, we develop simple relations to quantify the influence of height variation upon predicted z 0 and d via the standard deviation of building heights. The difference in these predictions compared to the more complex approach highlights the importance of considering the specific shape of the building-height distributions. Collectively, these results suggest that to accurately predict aerodynamic parameters of real urban areas, height variability must be considered in detail, but it may be acceptable to make simple assumptions about building layout and footprint shape.

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

Modelling and performance of Nb SIS mixers in the 1.3 mm and 0.8 mm bands

NASA Technical Reports Server (NTRS)

Karpov, A.; Carter, M.; Lazareff, B.; Billon-Pierron, D.; Gundlach, K. H.

1992-01-01

We describe the modeling and subsequent improvements of SIS waveguide mixers for the 200-270 and 330-370 GHz bands (Blundell, Carter, and Gundlach 1988, Carter et al 1991). These mixers are constructed for use in receivers on IRAM radiotelescopes on Pico Veleta (Spain, Sierra Nevada) and Plateau de Bure (French Alps), and must meet specific requirements. The standard reduced height waveguide structure with suspended stripline is first analyzed and a model is validated through comparison with scale model and working scale measurements. In the first step, the intrinsic limitations of the standard mixer structure are identified, and the parameters are optimized bearing in mind the radioastronomical applications. In the second step, inductive tuning of the junctions is introduced and optimized for minimum noise and maximum bandwidth. In the 1.3 mm band, a DSB receiver temperature of less than 110 K (minimum 80 K) is measured from 180 through 260 GHz. In the 0.8 mm band, a DSB receiver temperature of less than 250 K (minimum 175 K) is obtained between 325 and 355 GHz. All these results are obtained with room-temperature optics and a 4 GHz IF chain having a 500 MHz bandwidth and a noise temperature of 14 K.

CAN INFANTS BE “TAUGHT” TO ATTEND TO A NEW PHYSICAL VARIABLE IN AN EVENT CATEGORY? THE CASE OF HEIGHT IN COVERING EVENTS

PubMed Central

Wang, Su-hua; Baillargeon, Renée

2009-01-01

As they observe or produce events, infants identify variables that help them predict outcomes in each category of events. How do infants identify a new variable? An explanation-based learning (EBL) account suggests three essential steps: (1) observing contrastive outcomes relevant to the variable; (2) discovering the conditions associated with these outcomes; and (3) generating an explanation for the condition-outcome regularity discovered. In Experiments 1–3, 9-month-old infants watched events designed to “teach” them the variable height in covering events. After watching these events, designed in accord with the EBL account, the infants detected a height violation in a covering event, three months earlier than they ordinarily would have. In Experiments 4–6, the “teaching” events were modified to remove one of the EBL steps, and the infants no longer detected the height violation. The present findings thus support the EBL account and help specify the processes by which infants acquire their physical knowledge. PMID:18177635

An anthropometric analysis of Korean male helicopter pilots for helicopter cockpit design.

PubMed

Lee, Wonsup; Jung, Kihyo; Jeong, Jeongrim; Park, Jangwoon; Cho, Jayoung; Kim, Heeeun; Park, Seikwon; You, Heecheon

2013-01-01

This study measured 21 anthropometric dimensions (ADs) of 94 Korean male helicopter pilots in their 20s to 40s and compared them with corresponding measurements of Korean male civilians and the US Army male personnel. The ADs and the sample size of the anthropometric survey were determined by a four-step process: (1) selection of ADs related to helicopter cockpit design, (2) evaluation of the importance of each AD, (3) calculation of required sample sizes for selected precision levels and (4) determination of an appropriate sample size by considering both the AD importance evaluation results and the sample size requirements. The anthropometric comparison reveals that the Korean helicopter pilots are larger (ratio of means = 1.01-1.08) and less dispersed (ratio of standard deviations = 0.71-0.93) than the Korean male civilians and that they are shorter in stature (0.99), have shorter upper limbs (0.89-0.96) and lower limbs (0.93-0.97), but are taller on sitting height, sitting eye height and acromial height (1.01-1.03), and less dispersed (0.68-0.97) than the US Army personnel. The anthropometric characteristics of Korean male helicopter pilots were compared with those of Korean male civilians and US Army male personnel. The sample size determination process and the anthropometric comparison results presented in this study are useful to design an anthropometric survey and a helicopter cockpit layout, respectively.

Pulse height response of an optical particle counter to monodisperse aerosols

NASA Technical Reports Server (NTRS)

Wilmoth, R. G.; Grice, S. S.; Cuda, V.

1976-01-01

The pulse height response of a right angle scattering optical particle counter has been investigated using monodisperse aerosols of polystyrene latex spheres, di-octyl phthalate and methylene blue. The results confirm previous measurements for the variation of mean pulse height as a function of particle diameter and show good agreement with the relative response predicted by Mie scattering theory. Measured cumulative pulse height distributions were found to fit reasonably well to a log normal distribution with a minimum geometric standard deviation of about 1.4 for particle diameters greater than about 2 micrometers. The geometric standard deviation was found to increase significantly with decreasing particle diameter.

The Uniform Pattern of Growth and Skeletal Maturation during the Human Adolescent Growth Spurt.

PubMed

Sanders, James O; Qiu, Xing; Lu, Xiang; Duren, Dana L; Liu, Raymond W; Dang, Debbie; Menendez, Mariano E; Hans, Sarah D; Weber, David R; Cooperman, Daniel R

2017-12-01

Humans are one of the few species undergoing an adolescent growth spurt. Because children enter the spurt at different ages making age a poor maturity measure, longitudinal studies are necessary to identify the growth patterns and identify commonalities in adolescent growth. The standard maturity determinant, peak height velocity (PHV) timing, is difficult to estimate in individuals due to diurnal, postural, and measurement variation. Using prospective longitudinal populations of healthy children from two North American populations, we compared the timing of the adolescent growth spurt's peak height velocity to normalized heights and hand skeletal maturity radiographs. We found that in healthy children, the adolescent growth spurt is standardized at 90% of final height with similar patterns for children of both sexes beginning at the initiation of the growth spurt. Once children enter the growth spurt, their growth pattern is consistent between children with peak growth at 90% of final height and skeletal maturity closely reflecting growth remaining. This ability to use 90% of final height as easily identified important maturity standard with its close relationship to skeletal maturity represents a significant advance allowing accurate prediction of future growth for individual children and accurate maturity comparisons for future studies of children's growth.

Analysis of vertical distributions and effective flight layers of insects: three-dimensional simulation of flying insects and catch at trap heights

USDA-ARS?s Scientific Manuscript database

The mean height and standard deviation (SD) of flight is calculated for over 100 insect species from their catches on trap heights reported in the literature. The iterative equations for calculating mean height and SD are presented. The mean flight height for 95% of the studies varied from 0.17 to 5...

14 CFR 27.87 - Height-speed envelope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Height-speed envelope. 27.87 Section 27.87... STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight Performance § 27.87 Height-speed envelope. (a) If there is any combination of height and forward speed (including hover) under which a safe landing cannot be made under the...

14 CFR 27.87 - Height-speed envelope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Height-speed envelope. 27.87 Section 27.87... STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight Performance § 27.87 Height-speed envelope. (a) If there is any combination of height and forward speed (including hover) under which a safe landing cannot be made under the...

Characteristics of camel-gate structures with active doping channel profiles

NASA Astrophysics Data System (ADS)

Tsai, Jung-Hui; Lour, Wen-Shiung; Laih, Lih-Wen; Liu, Rong-Chau; Liu, Wen-Chau

1996-03-01

In this paper, we demonstrate the influence of channel doping profile on the performances of camel-gate field effect transistors (CAMFETs). For comparison, single and tri-step doping channel structures with identical doping thickness products are employed, while other parameters are kept unchanged. The results of a theoretical analysis show that the single doping channel FET with lightly doping active layer has higher barrier height and drain-source saturation current. However, the transconductance is decreased. For a tri-step doping channel structure, it is found that the output drain-source saturation current and the barrier height are enhanced. Furthermore, the relatively voltage independent performances are improved. Two CAMFETs with single and tri-step doping channel structures have been fabricated and discussed. The devices exhibit nearly voltage independent transconductances of 144 mS mm -1 and 222 mS mm -1 for single and tri-step doping channel CAMFETs, respectively. The operation gate voltage may extend to ± 1.5 V for a tri-step doping channel CAMFET. In addition, the drain current densities of > 750 and 405 mA mm -1 are obtained for the tri-step and single doping CAMFETs. These experimental results are inconsistent with theoretical analysis.

The relationship between foot arch measurements and walking parameters in children.

PubMed

Gill, Simone V; Keimig, Sara; Kelty-Stephen, Damian; Hung, Ya-Ching; DeSilva, Jeremy M

2016-01-23

Walking mechanics are influenced by body morphology. Foot arch height is one aspect of body morphology central to walking. However, generalizations about the relationship between arch height and walking are limited due to previous methodologies used for measuring the arch and the populations that have been studied. To gain the knowledge needed to support healthy gait in children and adults, we need to understand this relationship in unimpaired, typically developing children and adults using dynamic measures. The purpose of the current study was to examine the relationship between arch height and gait in a sample of healthy children and adults using dynamic measures. Data were collected from 638 participants (n = 254 children and n = 384 adults) at the Museum of Science, Boston (MOS) and from 18 4- to 8-year-olds at the Motor Development and Motor Control Laboratories. Digital footprints were used to calculate two arch indices: the Chippaux-Smirak (CSI) and the Keimig Indices (KI). The height of the navicular bone was measured. Gait parameters were captured with a mechanized gait carpet at the MOS and three-dimensional motion analyses and in-ground force plates in the Motor Development and Motor Control Laboratories. Linear regression analyses on data from the MOS confirmed that as age increases, step length increases. With a linear mixed effect regression model, we found that individuals who took longer steps had higher arches as measured by the KI. However, this relationship was no longer significant when only adults were included in the model. A model restricted to children found that amongst this sample, those with higher CSI and higher KI values take longer relative step lengths. Data from the Motor Development and Motor Control Laboratories showed that both CSI and KI added to the prediction; children with lower anterior ground reaction forces had higher CSI and higher KI values. Arch height indices were correlated with navicular height. These results suggest that more than one measure of the arch may be needed elucidate the relationship between arch height and gait.

2D AND 3D KINEMATICS DURING LATERAL STEP-DOWN TESTING IN INDIVIDUALS WITH ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION.

PubMed

Mostaed, Maria F; Werner, David M; Barrios, Joaquin A

2018-02-01

The lateral step-down test is an established clinical evaluation tool to assess quality of movement in patients with knee disorders. However, this test has not been investigated in individuals after anterior cruciate ligament reconstruction (ACLR) in association with quantitative 3D motion analysis. The purpose of this study was to determine the strength of association between visually-assessed quality of movement during the lateral step-down test and 3D lower limb kinematics in patients with history of ACLR. A second purpose was to compare kinematics between subgroups based on the presence or absence of faulty alignments during the task. The final purpose was to compare visually-assessed quality of movement scores between box heights during lateral step-down testing. Twenty subjects at least one year status post-ACLR (18 females, age of 24.5 ± 4.6 years and body mass index of 23.4 ± 2.3 kg/m 2 ) performed the lateral step-down test unilaterally on the surgical limb atop four and six inch boxes. A board-certified orthopedic physical therapist scored overall quality of movement during the lateral step-down test using established criteria during 2D video playback. Lower limb kinematics were simultaneously collected using 3D motion capture. An alpha level of 0.05 was used for all statistical treatments. Overall 2D quality of movement score significantly correlated (r =0.47-0.57) with 3D hip adduction and hip internal rotation across box heights. Across box heights, the presence of faulty pelvic alignment differentiated a subgroup exhibiting less peak knee flexion, and the presence of faulty knee alignment differentiated a subgroup exhibiting greater peak hip adduction. The six inch box elicited worse quality of movement compared to the four inch box. These results suggest that visually-assessed quality of movement is associated with several kinematic variables after ACLR. 2D movement deviations at the pelvis appear to consistently relate to less knee flexion, and 2D deviations at the knee appear to suggest greater hip adduction. Generally, poorer quality of movement was observed for the six inch box height. Clinically, these data suggest that interventions targeting hip abductor and knee extensor strength and neuromuscular control may be useful in the presence of poor quality of movement during lateral step-down testing. 2b.

The substitution reaction of (CNC)Fe-2N₂ with CO.

PubMed

Liu, Hongyan; Liu, Shuangshuang; Zhang, Xiang

2013-06-01

The substitution mechanism of two N₂ ligands in (CNC)Fe-2N₂ replaced by CO was studied theoretically at the B3LYP/LACVP* level. Both SN1 and SN₂ mechanisms were considered. The calculated results for the gas phase suggested that: 1) in SN1 mechanism, N₂ elimination, which involves S₀-T₁ PESs crossing, is the rate control step for both substitution stages. The barrier heights are 9.7 kcal mol(-1) and 13.05 kcal mol(-1), respectively. 2) In SN2 mechanism, the calculated barrier heights on LS PES are respectively 13.7 and 19.83 kcal mol(-1) for the two substitution steps, but S₀-T₁ PESs crossing lowers the two barriers to 10.7 and 15.7 kcal mol(-1), respectively. 3) Inclusion of solvation effect of THF by PCM model, the relative energies of all the key species (including minima, transition states and S₀-T₁ crossing points) do not have great difference from their gas phase relative energies. Considering that for each substitution step, SN1 barrier heights is slightly smaller than SN2 barrier, SN1 mechanism seems to be slightly preferable to SN2 mechanism.

The biological standard of living and mortality in Central Italy at the beginning of the 19th century.

PubMed

Coppola, Michela

2013-12-01

The biological standard of living in Central Italy at the beginning of the 19th century is analyzed using newly collected data on the height of recruits in the army of the Papal States. The results reveal a decline in height for the cohorts born under French rule (1796-1815). Although this trend was common to many parts of Europe, the estimated magnitude of the decline suggests a worsening of the biological standard of living of the working classes in the Papal States even relative to that of other countries. Despite the differences in the economic systems within the Papal States, no significant geographical variation in height has been found: even the most dynamic and advanced regions experienced a dramatic height decline. Mortality also increased during the period under consideration. Copyright © 2012 Elsevier B.V. All rights reserved.

The stepping behavior analysis of pedestrians from different age groups via a single-file experiment

NASA Astrophysics Data System (ADS)

Cao, Shuchao; Zhang, Jun; Song, Weiguo; Shi, Chang'an; Zhang, Ruifang

2018-03-01

The stepping behavior of pedestrians with different age compositions in single-file experiment is investigated in this paper. The relation between step length, step width and stepping time are analyzed by using the step measurement method based on the calculation of curvature of the trajectory. The relations of velocity-step width, velocity-step length and velocity-stepping time for different age groups are discussed and compared with previous studies. Finally effects of pedestrian gender and height on stepping laws and fundamental diagrams are analyzed. The study is helpful for understanding pedestrian dynamics of movement. Meanwhile, it offers experimental data to develop a microscopic model of pedestrian movement by considering stepping behavior.

Implementing and Evaluating School-Based Primary Prevention Programs and the Importance of Differential Effects on Outcomes

ERIC Educational Resources Information Center

Hussey, David L.; Flannery, Daniel J.

2007-01-01

In 2004, Second Step (Committee for Children, 2002), a violence prevention program, was implemented in the Cleveland Heights-University Heights school district for 1,416 K through second grade students. Both process and outcome measures were used to evaluate program impact and examine issues related to the implementation and evaluation of…

Mapping forest height, foliage height profiles and disturbance characteristics with time series of gap-filled Landsat and ALI imagery

NASA Astrophysics Data System (ADS)

Helmer, E.; Ruzycki, T. S.; Wunderle, J. M.; Kwit, C.; Ewert, D. N.; Voggesser, S. M.; Brandeis, T. J.

2011-12-01

We mapped tropical dry forest height (RMSE = 0.9 m, R2 = 0.84, range 0.6-7 m) and foliage height profiles with a time series of gap-filled Landsat and Advanced Land Imager (ALI) imagery for the island of Eleuthera, The Bahamas. We also mapped disturbance type and age with decision tree classification of the image time series. Having mapped these variables in the context of studies of wintering habitat of an endangered Nearctic-Neotropical migrant bird, the Kirtland's Warbler (Dendroica kirtlandii), we then illustrated relationships between forest vertical structure, disturbance type and counts of forage species important to the Kirtland's Warbler. The ALI imagery and the Landsat time series were both critical to the result for forest height, which the strong relationship of forest height with disturbance type and age facilitated. Also unique to this study was that seven of the eight image time steps were cloud-gap-filled images: mosaics of the clear parts of several cloudy scenes, in which cloud gaps in a reference scene for each time step are filled with image data from alternate scenes. We created each cloud-cleared image, including a virtually seamless ALI image mosaic, with regression tree normalization of the image data that filled cloud gaps. We also illustrated how viewing time series imagery as red-green-blue composites of tasseled cap wetness (RGB wetness composites) aids reference data collection for classifying tropical forest disturbance type and age.

14 CFR 77.17 - Obstruction standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... proportion of 100 feet for each additional nautical mile from the airport up to a maximum of 499 feet. (3) A... greater height than any of the following heights or surfaces: (1) A height of 499 feet AGL at the site of the object. (2) A height that is 200 feet AGL, or above the established airport elevation, whichever...

Two-step design method for highly compact three-dimensional freeform optical system for LED surface light source.

PubMed

Mao, Xianglong; Li, Hongtao; Han, Yanjun; Luo, Yi

2014-10-20

Designing an illumination system for a surface light source with a strict compactness requirement is quite challenging, especially for the general three-dimensional (3D) case. In accordance with the two key features of an expected illumination distribution, i.e., a well-controlled boundary and a precise illumination pattern, a two-step design method is proposed in this paper for highly compact 3D freeform illumination systems. In the first step, a target shape scaling strategy is combined with an iterative feedback modification algorithm to generate an optimized freeform optical system with a well-controlled boundary of the target distribution. In the second step, a set of selected radii of the system obtained in the first step are optimized to further improve the illuminating quality within the target region. The method is quite flexible and effective to design highly compact optical systems with almost no restriction on the shape of the desired target field. As examples, three highly compact freeform lenses with ratio of center height h of the lens and the maximum dimension D of the source ≤ 2.5:1 are designed for LED surface light sources to form a uniform illumination distribution on a rectangular, a cross-shaped and a complex cross pierced target plane respectively. High light control efficiency of η > 0.7 as well as low relative standard illumination deviation of RSD < 0.07 is obtained simultaneously for all the three design examples.

Physical Growth, Biological Age, and Nutritional Transitions of Adolescents Living at Moderate Altitudes in Peru

PubMed Central

Cossio-Bolaños, Marco; Gómez Campos, Rossana; Andruske, Cynthia Lee; Flores, Antonio Viveros; Luarte-Rocha, Cristian; Olivares, Pedro R.; Garcia-Rubio, Javier; de Arruda, Miguel

2015-01-01

Background: Peru is experiencing a stage of nutritional transition where the principal characteristics are typical of countries undergoing development. Objectives: The objectives of this study were the following: (a) compare physical growth patterns with an international standard; (b) determine biological age; and (c) analyze the double nutritional burden of adolescents living at a moderate altitude in Peru. Design: Weight, standing height, and sitting height were measured in 551 adolescents of both sexes (12.0 to 17.9 years old) from an urban area of Arequipa, Peru (2328 m). Physical growth was compared with the international standard of the CDC-2000. Biological age was determined by using a non-invasive transversal technique based on years from age at peak height velocity (APHV). Nutritional state was determined by means of weight for age and height for age. Z scores were calculated using international standards from the CDC-2000. Results: Body weight for both sexes was similar to the CDC-2000 international standards. At all ages, the girls’ height (p < 0.05) was below the standards. However, the boys’ height (p < 0.05) was less at ages, 15, 16, and 17. Biological age showed up in girls at age 12.7 years and for boys at 15.2 years. Stunted growth (8.7% boys and 18.0% girls) and over weight (11.3% boys and 8.8% girls) occurred in both groups. A relationship existed in both sexes between the categories of weight for the age and stunted growth by sex. Conclusions: Adolescents living at a moderate altitude exhibited stunted linear growth and biological maturation. Furthermore, adolescents of both sexes showed the presence of the double nutritional burden (stunted growth and excessive weight). PMID:26404334

Physical Growth, Biological Age, and Nutritional Transitions of Adolescents Living at Moderate Altitudes in Peru.

PubMed

Cossio-Bolaños, Marco; Campos, Rossana Gómez; Andruske, Cynthia Lee; Flores, Antonio Viveros; Luarte-Rocha, Cristian; Olivares, Pedro R; Garcia-Rubio, Javier; de Arruda, Miguel

2015-09-25

Peru is experiencing a stage of nutritional transition where the principal characteristics are typical of countries undergoing development. The objectives of this study were the following: (a) compare physical growth patterns with an international standard; (b) determine biological age; and (c) analyze the double nutritional burden of adolescents living at a moderate altitude in Peru. Weight, standing height, and sitting height were measured in 551 adolescents of both sexes (12.0 to 17.9 years old) from an urban area of Arequipa, Peru (2328 m). Physical growth was compared with the international standard of the CDC-2000. Biological age was determined by using a non-invasive transversal technique based on years from age at peak height velocity (APHV). Nutritional state was determined by means of weight for age and height for age. Z scores were calculated using international standards from the CDC-2000. Body weight for both sexes was similar to the CDC-2000 international standards. At all ages, the girls' height (p < 0.05) was below the standards. However, the boys' height (p < 0.05) was less at ages, 15, 16, and 17. Biological age showed up in girls at age 12.7 years and for boys at 15.2 years. Stunted growth (8.7% boys and 18.0% girls) and over weight (11.3% boys and 8.8% girls) occurred in both groups. A relationship existed in both sexes between the categories of weight for the age and stunted growth by sex. Adolescents living at a moderate altitude exhibited stunted linear growth and biological maturation. Furthermore, adolescents of both sexes showed the presence of the double nutritional burden (stunted growth and excessive weight).

Electromyographic assessment of muscle activity between genders during unilateral weight-bearing tasks using adjusted distances.

PubMed

Bouillon, Lucinda E; Wilhelm, Jacqueline; Eisel, Patricia; Wiesner, Jessica; Rachow, Megan; Hatteberg, Lindsay

2012-12-01

Researchers have observed differences in muscle activity patterns between males and females during functional exercises. The research methods employed have used various step heights and lunge distances to assess functional exercise making gender comparisons difficult. The purpose of this study was to examine core and lower extremity muscle activity between genders during single-limb exercises using adjusted distances and step heights based on a percentage of the participant's height. Twenty men and 20 women who were recreationally active and healthy participated in the study. Two-dimensional video and surface electromyography (SEMG) were used to assess performance during three exercise maneuvers (step down, forward lunge, and side-step lunge). Eight muscles were assessed using SEMG (rectus abdominus, external oblique, erector spinae, rectus femoris, tensor fascia latae, gluteus medius, gluteus maximus, biceps femoris). Maximal voluntary isometric contractions (MVIC) were used for each muscle and expressed as %MVIC to normalize SEMG to account for body mass differences. Exercises were randomized and distances were normalized to the participant's lower limb length. Descriptive statistics, mixed-model ANOVA, and ICCs with 95% confidence intervals were calculated. Males were taller, heavier, and had longer leg length when compared to the females. No differences in %MVIC activity were found between genders by task across the eight muscles. For both males and females, the step down task resulted in higher %MVIC for gluteus maximus compared to lunge, (p=0.002). Step down exercise produced higher %MVIC for gluteus medius than lunge (p=0.002) and side step (p=0.006). ICC(3,3) ranged from moderate to high (0.74 to 0.97) for the three tasks. Muscle activation among the eight muscles was similar between females and males during the lunge, side-step, and step down tasks, with distances adjusted to leg length. Both males and females elicited higher muscle activity for gluteus maximus and gluteus medius as compared to the trunk, hip flexors, or hamstring muscles. However these values were well below the recruitment levels necessary for strengthening in both genders. 4.

ELECTROMYOGRAPHIC ASSESSMENT OF MUSCLE ACTIVITY BETWEEN GENDERS DURING UNILATERAL WEIGHT‐BEARING TASKS USING ADJUSTED DISTANCES

PubMed Central

Wilhelm, Jacqueline; Eisel, Patricia; Wiesner, Jessica; Rachow, Megan; Hatteberg, Lindsay

2012-01-01

Purpose/Background: Researchers have observed differences in muscle activity patterns between males and females during functional exercises. The research methods employed have used various step heights and lunge distances to assess functional exercise making gender comparisons difficult. The purpose of this study was to examine core and lower extremity muscle activity between genders during single‐limb exercises using adjusted distances and step heights based on a percentage of the participant's height. Methods: Twenty men and 20 women who were recreationally active and healthy participated in the study. Two‐dimensional video and surface electromyography (SEMG) were used to assess performance during three exercise maneuvers (step down, forward lunge, and side‐step lunge). Eight muscles were assessed using SEMG (rectus abdominus, external oblique, erector spinae, rectus femoris, tensor fascia latae, gluteus medius, gluteus maximus, biceps femoris). Maximal voluntary isometric contractions (MVIC) were used for each muscle and expressed as %MVIC to normalize SEMG to account for body mass differences. Exercises were randomized and distances were normalized to the participant's lower limb length. Descriptive statistics, mixed‐model ANOVA, and ICCs with 95% confidence intervals were calculated. Results: Males were taller, heavier, and had longer leg length when compared to the females. No differences in %MVIC activity were found between genders by task across the eight muscles. For both males and females, the step down task resulted in higher %MVIC for gluteus maximus compared to lunge, (p=0.002). Step down exercise produced higher %MVIC for gluteus medius than lunge (p=0.002) and side step (p=0.006). ICC3,3 ranged from moderate to high (0.74 to 0.97) for the three tasks. Conclusions: Muscle activation among the eight muscles was similar between females and males during the lunge, side‐step, and step down tasks, with distances adjusted to leg length. Both males and females elicited higher muscle activity for gluteus maximus and gluteus medius as compared to the trunk, hip flexors, or hamstring muscles. However these values were well below the recruitment levels necessary for strengthening in both genders. Level of evidence: 4 PMID:23316423

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

Living standards in Black and White: evidence from the heights of Ohio Prison inmates, 1829-1913.

PubMed

Maloney, Thomas N; Carson, Scott Alan

2008-07-01

The use of height data to measure living standards is now a well-established method in the economic history literature. Moreover, a number of core findings are widely agreed upon. There are still some populations, places, and times, however, for which anthropometric evidence remains limited. One such example is 19th century African-Americans in the Northern US. Here, we use new data from the Ohio state prison to track heights of Black and White men incarcerated between 1829 and 1913. We corroborate the well-known mid-century height decline among White men. We find that Black men were shorter than White men, throughout the century controlling for a number of characteristics. We also find a pattern of height decline among Black men in mid-century similar to that found for White men.

Evaluating coastal sea surface heights based on a novel sub-waveform approach using sparse representation and conditional random fields

NASA Astrophysics Data System (ADS)

Uebbing, Bernd; Roscher, Ribana; Kusche, Jürgen

2016-04-01

Satellite radar altimeters allow global monitoring of mean sea level changes over the last two decades. However, coastal regions are less well observed due to influences on the returned signal energy by land located inside the altimeter footprint. The altimeter emits a radar pulse, which is reflected at the nadir-surface and measures the two-way travel time, as well as the returned energy as a function of time, resulting in a return waveform. Over the open ocean the waveform shape corresponds to a theoretical model which can be used to infer information on range corrections, significant wave height or wind speed. However, in coastal areas the shape of the waveform is significantly influenced by return signals from land, located in the altimeter footprint, leading to peaks which tend to bias the estimated parameters. Recently, several approaches dealing with this problem have been published, including utilizing only parts of the waveform (sub-waveforms), estimating the parameters in two steps or estimating additional peak parameters. We present a new approach in estimating sub-waveforms using conditional random fields (CRF) based on spatio-temporal waveform information. The CRF piece-wise approximates the measured waveforms based on a pre-derived dictionary of theoretical waveforms for various combinations of the geophysical parameters; neighboring range gates are likely to be assigned to the same underlying sub-waveform model. Depending on the choice of hyperparameters in the CRF estimation, the classification into sub-waveforms can either be more fine or coarse resulting in multiple sub-waveform hypotheses. After the sub-waveforms have been detected, existing retracking algorithms can be applied to derive water heights or other desired geophysical parameters from particular sub-waveforms. To identify the optimal heights from the multiple hypotheses, instead of utilizing a known reference height, we apply a Dijkstra-algorithm to find the "shortest path" of all possible heights. We apply our approach to Jason-2 data in different coastal areas, such as the Bangladesh coast or in the North Sea and compare our sea surface heights to various existing retrackers. Using the sub-waveform approach, we are able to derive meaningful water heights up to a few kilometers off the coast, where conventional retrackers, such as the standard ocean retracker, no longer provide useful data.

Gage for measuring coastal erosion and sedimentation

NASA Technical Reports Server (NTRS)

Carpini, T. D.; Moughon, W. C.

1970-01-01

Underwater sand height gage, which measures heights up to 12 inches, is comprised of two standard flush-diaphragm pressure transducers. Gage is very sensitive to buried water heights and is useful as a research tool in study of wet earth and landslide phenomena.

Effective robotic assistive pattern of treadmill training for spinal cord injury in a rat model

PubMed Central

Zhao, Bo-Lun; Li, Wen-Tao; Zhou, Xiao-Hua; Wu, Su-Qian; Cao, Hong-Shi; Bao, Zhu-Ren; An, Li-Bin

2018-01-01

The purpose of the present study was to establish an effective robotic assistive stepping pattern of body-weight-supported treadmill training based on a rat spinal cord injury (SCI) model and assess the effect by comparing this with another frequently used assistive stepping pattern. The recorded stepping patterns of both hind limbs of trained intact rats were edited to establish a 30-sec playback normal rat stepping pattern (NRSP). Step features (step length, step height, step number and swing duration), BBB scores, latencies, and amplitudes of the transcranial electrical motor-evoked potentials (tceMEPs) and neurofilament 200 (NF200) expression in the spinal cord lesion area during and after 3 weeks of body-weight-supported treadmill training (BWSTT) were compared in rats with spinal contusion receiving NRSP assistance (NRSPA) and those that received manual assistance (MA). Hind limb stepping performance among rats receiving NRSPA during BWSTT was greater than that among rats receiving MA in terms of longer step length, taller step height, and longer swing duration. Furthermore a higher BBB score was also indicated. The rats in the NRSPA group achieved superior results in the tceMEPs assessment and greater NF200 expression in the spinal cord lesion area compared with the rats in the MA group. These findings suggest NRSPA was an effective assistive pattern of treadmill training compared with MA based on the rat SCI model and this approach could be used as a new platform for animal experiments for better understanding the mechanisms of SCI rehabilitation. PMID:29545846

Optimal leveling of flow over one-dimensional topography by Marangoni stresses

NASA Astrophysics Data System (ADS)

Gramlich, C. M.; Homsy, G. M.; Kalliadasis, Serafim

2001-11-01

A thin viscous film flowing over a step down in topography exhibits a capillary ridge near the step, which may be undesirable in applications. This paper investigates optimal leveling of the ridge by means of a Marangoni stress such as might be produced by a localized heater creating temperature variations at the film surface. Lubrication theory results in a differential equation for the free surface, which can be solved numerically for any given topography and temperature profile. Leveling the ridge is then formulated as an optimization problem to minimize the maximum free-surface height by varying the heater strength, position, and width. Optimized heaters with 'top-hat' or parabolic temperature profiles replace the original ridge with two smaller ridges of equal size, achieving leveling of better than 50%. An optimized asymmetric n-step temperature distribution results in (n+1) ridges and reduces the variation in surface height by a factor of better than 1/(n+1).

Weight-to-height ratio and aerobic capacity in 15-year-old male taekwondo martial artists.

PubMed

Poliszczuk, Tatiana; Jankowska, Ewa; Poliszczuk, Dmytro

2013-01-01

Martial arts are growing in popularity throughout the whole world. Their beneficial influence on physical development and fitness is noteworthy. Martial arts are an attractive form of physical recreation, constitute a perfect means for combating stress, and have a positive effect on general health, including during rehabilitation. The aim of this study is to assess physical development and aerobic capacity in boys who practice taekwondo and to determine the relationships between results of a fitness test and particular parameters of physical development. Study participants comparised 51 boys aged 15 years who practiced taekwondo (with training experience ranging from 1 to 6 years). Volkov´s modification of the Harvard Step Test was used to assess body height and body mass. BMI was also calculated. Centile charts were used to assess weight-to-height ratio and the level of measured parameters. BMI was analyzed according to the Cole classification system. Dispersion was calculated using a coefficient of variation. The Pearson product-moment correlation coefficient between selected parameters was also calculated. Most study participants had normal BMI, but 30% showed overweight and 13% showed underweight or emaciation. Weight-to-height ratio differed significantly from the norm in 33% of the boys when compared to centile charts. All participants had average aerobic capacity. However, when weight-to-height ratio was compared to the results of the Harvard Step Test, boys with normal body proportions performed much better in the test than boys with abnormal body mass (p<0.05). Study participants showed abnormal weight-to-height ratio mainly in terms of overweight. The boys had greater body height and body mass compared to the general Polish population. Aerobic capacity differed considerably between participants.

Combining 3D structure of real video and synthetic objects

NASA Astrophysics Data System (ADS)

Kim, Man-Bae; Song, Mun-Sup; Kim, Do-Kyoon

1998-04-01

This paper presents a new approach of combining real video and synthetic objects. The purpose of this work is to use the proposed technology in the fields of advanced animation, virtual reality, games, and so forth. Computer graphics has been used in the fields previously mentioned. Recently, some applications have added real video to graphic scenes for the purpose of augmenting the realism that the computer graphics lacks in. This approach called augmented or mixed reality can produce more realistic environment that the entire use of computer graphics. Our approach differs from the virtual reality and augmented reality in the manner that computer- generated graphic objects are combined to 3D structure extracted from monocular image sequences. The extraction of the 3D structure requires the estimation of 3D depth followed by the construction of a height map. Graphic objects are then combined to the height map. The realization of our proposed approach is carried out in the following steps: (1) We derive 3D structure from test image sequences. The extraction of the 3D structure requires the estimation of depth and the construction of a height map. Due to the contents of the test sequence, the height map represents the 3D structure. (2) The height map is modeled by Delaunay triangulation or Bezier surface and each planar surface is texture-mapped. (3) Finally, graphic objects are combined to the height map. Because 3D structure of the height map is already known, Step (3) is easily manipulated. Following this procedure, we produced an animation video demonstrating the combination of the 3D structure and graphic models. Users can navigate the realistic 3D world whose associated image is rendered on the display monitor.

Effects of 8-week in-season plyometric training on upper and lower limb performance of elite adolescent handball players.

PubMed

Chelly, Mohamed Souhaiel; Hermassi, Souhail; Aouadi, Ridha; Shephard, Roy J

2014-05-01

We hypothesized that replacement of a part of the normal in-season regimen of top-level adolescent handball players by an 8-week biweekly course of lower and upper limb plyometric training would enhance characteristics important to competition, including peak power output (Wpeak), jump performance, muscle volume, and ball throwing velocity. Study participants (23 men, age: 17.4 ± 0.5 years, body mass: 79.9 ± 11.5 kg, height: 1.79 ± 6.19 m, body fat: 13.8 ± 2.1%) were randomly assigned between controls (C; n = 11) and an experimental group (E, n = 12). Measures preintervention and postintervention included force-velocity ergometer tests for upper (Wupper peak) and lower limbs (Wlower peak), force platform determinations of squat jump (SJ) and countermovement jump (CMJ) characteristics (jump height, maximal force, initial velocity, and average power), video filming of sprint velocities (first step [V1S], first 5 m [V5m], and 25-30 m [Vmax]), and anthropometric estimates of leg muscle volume. E showed gains relative to C in Wupper peak and Wlower peak (p < 0.01 and p < 0.001), SJ (height p < 0.01; force p ≤ 0.05), CMJ (height p < 0.01; force p < 0.01 and relative power p ≤ 0.05), and sprint velocities (p < 0.001 for V1S, V5m, and Vmax). E also showed increases in leg and thigh muscle volumes (p < 0.001), but arm muscle volumes did not differ from control. We conclude that introduction of biweekly plyometric training into the standard regimen improved components important to handball performance, particularly explosive actions, such as sprinting, jumping, and ball throwing velocity.

Longitudinal Evaluation of Wound Healing after Penetrating Corneal Injury: Anterior Segment Optical Coherence Tomography Study.

PubMed

Zheng, Kang Keng; Cai, Jianhao; Rong, Shi Song; Peng, Kun; Xia, Honghe; Jin, Chuan; Lu, Xuehui; Liu, Xinyu; Chen, Haoyu; Jhanji, Vishal

2017-07-01

Ocular imaging can enhance our understanding of wound healing. We report anterior segment optical coherence tomography (ASOCT) findings in penetrating corneal injury. Serial ASOCT was performed after repair of penetrating corneal injury. Internal aberrations of wound edges were labeled as "steps" or "gaps" on ASOCT images. The wound type was characterized as: type 1: continuous inner wound edge or step height ≤ 80 µm; type 2: step height > 80 µm; type 3: gap between wound edges; and type 4: intraocular tissue adherent to wound. Surgical outcomes of different wound types were compared. 50 consecutive patients were included (6 females, 44 males; mean age 33 ± 12 years). The average size of wound was 4.2 ± 2.6 mm (type 1, 8 eyes; type 2, 27 eyes; type 3, 12 eyes; type 4, 3 eyes). At the end of 3 months, 70% (n = 35) of the wounds were type 1. At the end of 6 months, all type 1 wounds had healed completely, whereas about half of type 2 (48.1%) and type 3 (50%) wounds had recovered to type 1 configuration. The wound type at baseline affected the height of step (p = 0.047) and corneal thickness at 6 months (p = 0.035). ASOCT is a useful tool for monitoring wound healing in cases with penetrating corneal injury. Majority of the wound edges appose between 3 and 6 months after trauma. In our study, baseline wound configuration affected the healing pattern.

Accuracy of Multiple Pour Cast from Various Elastomer Impression Methods

PubMed Central

Saad Toman, Majed; Ali Al-Shahrani, Abdullah; Ali Al-Qarni, Abdullah

2016-01-01

The accurate duplicate cast obtained from a single impression reduces the profession clinical time, patient inconvenience, and extra material cost. The stainless steel working cast model assembly consisting of two abutments and one pontic area was fabricated. Two sets of six each custom aluminum trays were fabricated, with five mm spacer and two mm spacer. The impression methods evaluated during the study were additional silicone putty reline (two steps), heavy-light body (one step), monophase (one step), and polyether (one step). Type IV gypsum casts were poured at the interval of one hour, 12 hours, 24 hours, and 48 hours. The resultant cast was measured with traveling microscope for the comparative dimensional accuracy. The data obtained were subjected to Analysis of Variance test at significance level <0.05. The die obtained from two-step putty reline impression techniques had the percentage of variation for the height −0.36 to −0.97%, while diameter was increased by 0.40–0.90%. The values for one-step heavy-light body impression dies, additional silicone monophase impressions, and polyether were −0.73 to −1.21%, −1.34%, and −1.46% for the height and 0.50–0.80%, 1.20%, and −1.30% for the width, respectively. PMID:28096815

Microstructural dependency of optical properties of m-plane InGaN multiple quantum wells grown on 2° misoriented bulk GaN substrates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, Fengzai; Barnard, Jonathan S.; Zhu, Tongtong

A non-polar m-plane structure consisting of five InGaN/GaN quantum wells (QWs) was grown on ammonothermal bulk GaN by metal-organic vapor phase epitaxy. Surface step bunches propagating through the QW stack were found to accommodate the 2° substrate miscut towards the -c direction. Both large steps with heights of a few tens of nanometres and small steps between one and a few atomic layers in height are observed, the former of which exhibit cathodoluminescence at longer wavelengths than the adjacent m-plane terraces. This is attributed to the formation of semi-polar facets at the steps on which the QWs are shown tomore » be thicker and have higher Indium contents than those in the adjacent m-plane regions. Discrete basal-plane stacking faults (BSFs) were occasionally initiated from the QWs on the main m-plane terraces, but groups of BSFs were frequently observed to initiate from those on the large steps, probably related to the increased strain associated with the locally higher indium content and thickness.« less

Laminar CuO-water nano-fluid flow and heat transfer in a backward-facing step with and without obstacle

NASA Astrophysics Data System (ADS)

Togun, Hussein

2016-03-01

This paper presents a numerical investigate on CuO-water nano-fluid and heat transfer in a backward-facing step with and without obstacle. The range of Reynolds number varied from 75 to 225 with volume fraction on CuO nanoparticles varied from 1 to 4 % at constant heat flux was investigated. Continuity, momentum, and energy equations with finite volume method in two dimensions were employed. Four different configurations of backward-facing step (without obstacle, with obstacle of 1.5 mm, with obstacle of 3 mm, with obstacle of 4.5 mm) were considered to find the best thermal performance. The results show that the maximum augmentation in heat transfer was about 22 % for backward-facing step with obstacle of 4.5 mm and using CuO nanoparticles at Reynolds number of 225 compared with backward-facing step without obstacle. It is also observed that increase in size of recirculation region with increase of height obstacle on the channel wall has remarkable effect on thermal performance. The results also found that increases in Reynolds number, height obstacle, and volume fractions of CuO nanoparticles lead to increase of pressure drop.

Dynamic Modeling of the Main Blow in Basic Oxygen Steelmaking Using Measured Step Responses

NASA Astrophysics Data System (ADS)

Kattenbelt, Carolien; Roffel, B.

2008-10-01

In the control and optimization of basic oxygen steelmaking, it is important to have an understanding of the influence of control variables on the process. However, important process variables such as the composition of the steel and slag cannot be measured continuously. The decarburization rate and the accumulation rate of oxygen, which can be derived from the generally measured waste gas flow and composition, are an indication of changes in steel and slag composition. The influence of the control variables on the decarburization rate and the accumulation rate of oxygen can best be determined in the main blow period. In this article, the measured step responses of the decarburization rate and the accumulation rate of oxygen to step changes in the oxygen blowing rate, lance height, and the addition rate of iron ore during the main blow are presented. These measured step responses are subsequently used to develop a dynamic model for the main blow. The model consists of an iron oxide and a carbon balance and an additional equation describing the influence of the lance height and the oxygen blowing rate on the decarburization rate. With this simple dynamic model, the measured step responses can be explained satisfactorily.

Estimating insect flight densities from attractive trap catches and flight height distributions

USDA-ARS?s Scientific Manuscript database

Insect species often exhibit a specific mean flight height and vertical flight distribution that approximates a normal distribution with a characteristic standard deviation (SD). Many studies in the literature report catches on passive (non-attractive) traps at several heights. These catches were us...

Family structure and childhood anthropometry in Saint Paul, Minnesota in 1918

PubMed Central

Warren, John Robert

2017-01-01

Concern with childhood nutrition prompted numerous surveys of children’s growth in the United States after 1870. The Children’s Bureau’s 1918 “Weighing and Measuring Test” measured two million children to produce the first official American growth norms. Individual data for 14,000 children survives from the Saint Paul, Minnesota survey whose stature closely approximated national norms. As well as anthropometry the survey recorded exact ages, street address and full name. These variables allow linkage to the 1920 census to obtain demographic and socioeconomic information. We matched 72% of children to census families creating a sample of nearly 10,000 children. Children in the entire survey (linked set) averaged 0.74 (0.72) standard deviations below modern WHO height-for-age standards, and 0.48 (0.46) standard deviations below modern weight-for-age norms. Sibship size strongly influenced height-for-age, and had weaker influence on weight-for-age. Each additional child six or underreduced height-for-age scores by 0.07 standard deviations (95% CI: −0.03, 0.11). Teenage siblings had little effect on height-forage. Social class effects were substantial. Children of laborers averaged half a standard deviation shorter than children of professionals. Family structure and socio-economic status had compounding impacts on children’s stature. PMID:28943749

Histogram-based quantitative evaluation of endobronchial ultrasonography images of peripheral pulmonary lesion.

PubMed

Morikawa, Kei; Kurimoto, Noriaki; Inoue, Takeo; Mineshita, Masamichi; Miyazawa, Teruomi

2015-01-01

Endobronchial ultrasonography using a guide sheath (EBUS-GS) is an increasingly common bronchoscopic technique, but currently, no methods have been established to quantitatively evaluate EBUS images of peripheral pulmonary lesions. The purpose of this study was to evaluate whether histogram data collected from EBUS-GS images can contribute to the diagnosis of lung cancer. Histogram-based analyses focusing on the brightness of EBUS images were retrospectively conducted: 60 patients (38 lung cancer; 22 inflammatory diseases), with clear EBUS images were included. For each patient, a 400-pixel region of interest was selected, typically located at a 3- to 5-mm radius from the probe, from recorded EBUS images during bronchoscopy. Histogram height, width, height/width ratio, standard deviation, kurtosis and skewness were investigated as diagnostic indicators. Median histogram height, width, height/width ratio and standard deviation were significantly different between lung cancer and benign lesions (all p < 0.01). With a cutoff value for standard deviation of 10.5, lung cancer could be diagnosed with an accuracy of 81.7%. Other characteristics investigated were inferior when compared to histogram standard deviation. Histogram standard deviation appears to be the most useful characteristic for diagnosing lung cancer using EBUS images. © 2015 S. Karger AG, Basel.

Influence of Age, Maturity, and Body Size on the Spatiotemporal Determinants of Maximal Sprint Speed in Boys.

PubMed

Meyers, Robert W; Oliver, Jon L; Hughes, Michael G; Lloyd, Rhodri S; Cronin, John B

2017-04-01

Meyers, RW, Oliver, JL, Hughes, MG, Lloyd, RS, and Cronin, JB. Influence of age, maturity, and body size on the spatiotemporal determinants of maximal sprint speed in boys. J Strength Cond Res 31(4): 1009-1016, 2017-The aim of this study was to investigate the influence of age, maturity, and body size on the spatiotemporal determinants of maximal sprint speed in boys. Three-hundred and seventy-five boys (age: 13.0 ± 1.3 years) completed a 30-m sprint test, during which maximal speed, step length, step frequency, contact time, and flight time were recorded using an optical measurement system. Body mass, height, leg length, and a maturity offset represented somatic variables. Step frequency accounted for the highest proportion of variance in speed (∼58%) in the pre-peak height velocity (pre-PHV) group, whereas step length explained the majority of the variance in speed (∼54%) in the post-PHV group. In the pre-PHV group, mass was negatively related to speed, step length, step frequency, and contact time; however, measures of stature had a positive influence on speed and step length yet a negative influence on step frequency. Speed and step length were also negatively influence by mass in the post-PHV group, whereas leg length continued to positively influence step length. The results highlighted that pre-PHV boys may be deemed step frequency reliant, whereas those post-PHV boys may be marginally step length reliant. Furthermore, the negative influence of body mass, both pre-PHV and post-PHV, suggests that training to optimize sprint performance in youth should include methods such as plyometric and strength training, where a high neuromuscular focus and the development force production relative to body weight are key foci.

A laboratory investigation into microwave backscattering from sea ice. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Bredow, Jonathan W.

1989-01-01

The sources of scattering of artificial sea ice were determined, backscatter measurements semi-quantitatively were compared with theoretical predictions, and inexpensive polarimetric radars were developed for sea ice backscatter studies. A brief review of the dielectric properties of sea ice and of commonly used surface and volume scattering theories is presented. A description is provided of the backscatter measurements performed and experimental techniques used. The development of inexpensive short-range polarimetric radars is discussed. The steps taken to add polarimetric capability to a simple FM-W radar are considered as are sample polarimetric phase measurements of the radar. Ice surface characterization data and techniques are discussed, including computation of surface rms height and correlation length and air bubble distribution statistics. A method is also presented of estimating the standard deviation of rms height and correlation length for cases of few data points. Comparisons were made of backscatter measurements and theory. It was determined that backscatter from an extremely smooth saline ice surface at C band cannot be attributed only to surface scatter. It was found that snow cover had a significant influence on backscatter from extremely smooth saline ice at C band.

Patterns of Growth after Kidney Transplantation among Children with ESRD

PubMed Central

Franke, Doris; Thomas, Lena; Steffens, Rena; Pavičić, Leo; Gellermann, Jutta; Froede, Kerstin; Querfeld, Uwe; Haffner, Dieter

2015-01-01

Background and objectives Poor linear growth is a frequent complication of CKD. This study evaluated the effect of kidney transplantation on age-related growth of linear body segments in pediatric renal transplant recipients who were enrolled from May 1998 until August 2013 in the CKD Growth and Development observational cohort study. Design, setting, participants, & measurements Linear growth (height, sitting height, arm and leg lengths) was prospectively investigated during 1639 annual visits in a cohort of 389 pediatric renal transplant recipients ages 2–18 years with a median follow-up of 3.4 years (interquartile range, 1.9–5.9 years). Linear mixed-effects models were used to assess age-related changes and predictors of linear body segments. Results During early childhood, patients showed lower mean SD scores (SDS) for height (−1.7) and a markedly elevated sitting height index (ratio of sitting height to total body height) compared with healthy children (1.6 SDS), indicating disproportionate stunting (each P<0.001). After early childhood a sustained increase in standardized leg length and a constant decrease in standardized sitting height were noted (each P<0.001), resulting in significant catch-up growth and almost complete normalization of sitting height index by adult age (0.4 SDS; P<0.01 versus age 2–4 years). Time after transplantation, congenital renal disease, bone maturation, steroid exposure, degree of metabolic acidosis and anemia, intrauterine growth restriction, and parental height were significant predictors of linear body dimensions and body proportions (each P<0.05). Conclusions Children with ESRD present with disproportionate stunting. In pediatric renal transplant recipients, a sustained increase in standardized leg length and total body height is observed from preschool until adult age, resulting in restoration of body proportions in most patients. Reduction of steroid exposure and optimal metabolic control before and after transplantation are promising measures to further improve growth outcome. PMID:25352379

Patterns of growth after kidney transplantation among children with ESRD.

PubMed

Franke, Doris; Thomas, Lena; Steffens, Rena; Pavičić, Leo; Gellermann, Jutta; Froede, Kerstin; Querfeld, Uwe; Haffner, Dieter; Živičnjak, Miroslav

2015-01-07

Poor linear growth is a frequent complication of CKD. This study evaluated the effect of kidney transplantation on age-related growth of linear body segments in pediatric renal transplant recipients who were enrolled from May 1998 until August 2013 in the CKD Growth and Development observational cohort study. Linear growth (height, sitting height, arm and leg lengths) was prospectively investigated during 1639 annual visits in a cohort of 389 pediatric renal transplant recipients ages 2-18 years with a median follow-up of 3.4 years (interquartile range, 1.9-5.9 years). Linear mixed-effects models were used to assess age-related changes and predictors of linear body segments. During early childhood, patients showed lower mean SD scores (SDS) for height (-1.7) and a markedly elevated sitting height index (ratio of sitting height to total body height) compared with healthy children (1.6 SDS), indicating disproportionate stunting (each P<0.001). After early childhood a sustained increase in standardized leg length and a constant decrease in standardized sitting height were noted (each P<0.001), resulting in significant catch-up growth and almost complete normalization of sitting height index by adult age (0.4 SDS; P<0.01 versus age 2-4 years). Time after transplantation, congenital renal disease, bone maturation, steroid exposure, degree of metabolic acidosis and anemia, intrauterine growth restriction, and parental height were significant predictors of linear body dimensions and body proportions (each P<0.05). Children with ESRD present with disproportionate stunting. In pediatric renal transplant recipients, a sustained increase in standardized leg length and total body height is observed from preschool until adult age, resulting in restoration of body proportions in most patients. Reduction of steroid exposure and optimal metabolic control before and after transplantation are promising measures to further improve growth outcome. Copyright © 2015 by the American Society of Nephrology.

Detailed analysis of an optimized FPP-based 3D imaging system

NASA Astrophysics Data System (ADS)

Tran, Dat; Thai, Anh; Duong, Kiet; Nguyen, Thanh; Nehmetallah, Georges

2016-05-01

In this paper, we present detail analysis and a step-by-step implementation of an optimized fringe projection profilometry (FPP) based 3D shape measurement system. First, we propose a multi-frequency and multi-phase shifting sinusoidal fringe pattern reconstruction approach to increase accuracy and sensitivity of the system. Second, phase error compensation caused by the nonlinear transfer function of the projector and camera is performed through polynomial approximation. Third, phase unwrapping is performed using spatial and temporal techniques and the tradeoff between processing speed and high accuracy is discussed in details. Fourth, generalized camera and system calibration are developed for phase to real world coordinate transformation. The calibration coefficients are estimated accurately using a reference plane and several gauge blocks with precisely known heights and by employing a nonlinear least square fitting method. Fifth, a texture will be attached to the height profile by registering a 2D real photo to the 3D height map. The last step is to perform 3D image fusion and registration using an iterative closest point (ICP) algorithm for a full field of view reconstruction. The system is experimentally constructed using compact, portable, and low cost off-the-shelf components. A MATLAB® based GUI is developed to control and synchronize the whole system.

Shoe collar height effect on athletic performance, ankle joint kinematics and kinetics during unanticipated maximum-effort side-cutting performance.

PubMed

Lam, Gilbert Wing Kai; Park, Eun Jung; Lee, Ki-Kwang; Cheung, Jason Tak-Man

2015-01-01

Side-step cutting manoeuvres comprise the coordination between planting and non-planting legs. Increased shoe collar height is expected to influence ankle biomechanics of both legs and possibly respective cutting performance. This study examined the shoe collar height effect on kinematics and kinetics of planting and non-planting legs during an unanticipated side-step cutting. Fifteen university basketball players performed maximum-effort side-step cutting to the left 45° direction or a straight ahead run in response to a random light signal. Seven successful cutting trials were collected for each condition. Athletic performance, ground reaction force, ankle kinematics and kinetics of both legs were analysed using paired t-tests. Results indicated that high-collar shoes resulted in less ankle inversion and external rotation during initial contact for the planting leg. The high-collar shoes also exhibited a smaller ankle range of motion in the sagittal and transverse planes for both legs, respectively. However, no collar effect was found for ankle moments and performance indicators including cutting performance time, ground contact time, propulsion ground reaction forces and impulses. These findings indicated that high-collar shoes altered ankle positioning and restricted ankle joint freedom movements in both legs, while no negative effect was found for athletic cutting performance.

Run-up Variability due to Source Effects

NASA Astrophysics Data System (ADS)

Del Giudice, Tania; Zolezzi, Francesca; Traverso, Chiara; Valfrè, Giulio; Poggi, Pamela; Parker, Eric J.

2010-05-01

This paper investigates the variability of tsunami run-up at a specific location due to uncertainty in earthquake source parameters. It is important to quantify this 'inter-event' variability for probabilistic assessments of tsunami hazard. In principal, this aspect of variability could be studied by comparing field observations at a single location from a number of tsunamigenic events caused by the same source. As such an extensive dataset does not exist, we decided to study the inter-event variability through numerical modelling. We attempt to answer the question 'What is the potential variability of tsunami wave run-up at a specific site, for a given magnitude earthquake occurring at a known location'. The uncertainty is expected to arise from the lack of knowledge regarding the specific details of the fault rupture 'source' parameters. The following steps were followed: the statistical distributions of the main earthquake source parameters affecting the tsunami height were established by studying fault plane solutions of known earthquakes; a case study based on a possible tsunami impact on Egypt coast has been set up and simulated, varying the geometrical parameters of the source; simulation results have been analyzed deriving relationships between run-up height and source parameters; using the derived relationships a Monte Carlo simulation has been performed in order to create the necessary dataset to investigate the inter-event variability of the run-up height along the coast; the inter-event variability of the run-up height along the coast has been investigated. Given the distribution of source parameters and their variability, we studied how this variability propagates to the run-up height, using the Cornell 'Multi-grid coupled Tsunami Model' (COMCOT). The case study was based on the large thrust faulting offshore the south-western Greek coast, thought to have been responsible for the infamous 1303 tsunami. Numerical modelling of the event was used to assess the impact on the North African coast. The effects of uncertainty in fault parameters were assessed by perturbing the base model, and observing variation on wave height along the coast. The tsunami wave run-up was computed at 4020 locations along the Egyptian coast between longitudes 28.7 E and 33.8 E. To assess the effects of fault parameters uncertainty, input model parameters have been varied and effects on run-up have been analyzed. The simulations show that for a given point there are linear relationships between run-up and both fault dislocation and rupture length. A superposition analysis shows that a linear combination of the effects of the different source parameters (evaluated results) leads to a good approximation of the simulated results. This relationship is then used as the basis for a Monte Carlo simulation. The Monte Carlo simulation was performed for 1600 scenarios at each of the 4020 points along the coast. The coefficient of variation (the ratio between standard deviation of the results and the average of the run-up heights along the coast) is comprised between 0.14 and 3.11 with an average value along the coast equal to 0.67. The coefficient of variation of normalized run-up has been compared with the standard deviation of spectral acceleration attenuation laws used for probabilistic seismic hazard assessment studies. These values have a similar meaning, and the uncertainty in the two cases is similar. The 'rule of thumb' relationship between mean and sigma can be expressed as follows: ?+ σ ≈ 2?. The implication is that the uncertainty in run-up estimation should give a range of values within approximately two times the average. This uncertainty should be considered in tsunami hazard analysis, such as inundation and risk maps, evacuation plans and the other related steps.

Waist Circumference, Pedometer Placement, and Step-Counting Accuracy in Youth

ERIC Educational Resources Information Center

Abel, Mark G.; Hannon, James C.; Eisenman, Patricia A.; Ransdell, Lynda B.; Pett, Marjorie; Williams, Daniel P.

2009-01-01

This study examined whether differences in waist circumference (WC) and pedometer placement (anterior vs. midaxillary vs. posterior) affect the agreement between pedometer and observed steps during treadmill and self-paced walking. Participants included 19 pairs of youth (9-15 years old) who were matched for sex, race, and height and stratified by…

Continuation of SAGE and MLS High-Resolution Ozone Profiles with the Suomi NPP OMPS Limb Profiler

NASA Astrophysics Data System (ADS)

Kramarova, N. A.; Bhartia, P. K.; Moy, L.; Chen, Z.; Frith, S. M.

2015-12-01

The Ozone Mapper and Profiler Suite (OMPS) Limb Profiler (LP) onboard the Suomi NPP satellite is design to measure ozone profiles with a high vertical resolution (~2 km) and dense spatial sampling (~1° latitude). The LP sensor represents a new generation of the US ozone profile instruments with the plan for a follow-up limb instrument onboard the Joint Polar Satellite System 2 (JPSS-2) in 2021. In this study we will examine the suitability of using LP profiles to continue the EOS climate ozone profile record from the SAGE and MLS datasets. First of all, we evaluate the accuracy in determining the LP tangent height by analyzing measured and calculated radiances. The accurate estimation of the tangent height is critical for limb observations. Several methods were explored to estimate the uncertainties in the LP tangent height registration, and the results will be briefly summarized in this presentation. Version 2 of LP data, released in May 2014, includes a static adjustment of ~1.5 km and a dynamic tangent height adjustment within each orbit. A recent analysis of Version 2 Level 1 radiances revealed a 100 m step in the tangent height that occurred on 26 April 2013, due to a switch to two star trackers in determining spacecraft position. In addition, a ~200 m shift in the tangent height along each orbit was detected. These uncertainties in tangent height registrations can affect the stability of the LP ozone record. Therefore, the second step in our study includes a validation of LP ozone profiles against correlative satellite ozone measurements (Aura MLS, ACE-FTS, OSIRIS, and SBUV) with the focus on time-dependent changes. We estimate relative drifts between OMPS LP and correlative ozone records to evaluate stability of the LP measurements. We also test the tangent height corrections found in the internal analysis of Version 2 measurements to determine their effect on the long-term stability of the LP ozone record.

Influence of a Horizontal Approach on the Mechanical Output during Drop Jumps

ERIC Educational Resources Information Center

Ruan, Mianfang; Li, Li

2008-01-01

This study investigated the influence of a horizontal approach to mechanical output during drop jumps. Participants performed drop jumps from heights of 15, 30, 45, and 60 cm with zero, one, two, and three approach steps. The peak summed power during the push-off phase changed quadratically across heights (6.2 [plus or minus] 0.3, 6.7 [plus or…

Ground Reaction Forces of the Lead and Trail Limbs when Stepping Over an Obstacle

PubMed Central

Bovonsunthonchai, Sunee; Khobkhun, Fuengfa; Vachalathiti, Roongtiwa

2015-01-01

Background Precise force generation and absorption during stepping over different obstacles need to be quantified for task accomplishment. This study aimed to quantify how the lead limb (LL) and trail limb (TL) generate and absorb forces while stepping over obstacle of various heights. Material/Methods Thirteen healthy young women participated in the study. Force data were collected from 2 force plates when participants stepped over obstacles. Two limbs (right LL and left TL) and 4 conditions of stepping (no obstacle, stepping over 5 cm, 20 cm, and 30 cm obstacle heights) were tested for main effect and interaction effect by 2-way ANOVA. Paired t-test and 1-way repeated-measure ANOVA were used to compare differences of variables between limbs and among stepping conditions, respectively. The main effects on the limb were found in first peak vertical force, minimum vertical force, propulsive peak force, and propulsive impulse. Results Significant main effects of condition were found in time to minimum force, time to the second peak force, time to propulsive peak force, first peak vertical force, braking peak force, propulsive peak force, vertical impulse, braking impulse, and propulsive impulse. Interaction effects of limb and condition were found in first peak vertical force, propulsive peak force, braking impulse, and propulsive impulse. Conclusions Adaptations of force generation in the LL and TL were found to involve adaptability to altered external environment during stepping in healthy young adults. PMID:26169293

Spatio-temporal evaluation of plant height in corn via unmanned aerial systems

NASA Astrophysics Data System (ADS)

Varela, Sebastian; Assefa, Yared; Vara Prasad, P. V.; Peralta, Nahuel R.; Griffin, Terry W.; Sharda, Ajay; Ferguson, Allison; Ciampitti, Ignacio A.

2017-07-01

Detailed spatial and temporal data on plant growth are critical to guide crop management. Conventional methods to determine field plant traits are intensive, time-consuming, expensive, and limited to small areas. The objective of this study was to examine the integration of data collected via unmanned aerial systems (UAS) at critical corn (Zea mays L.) developmental stages for plant height and its relation to plant biomass. The main steps followed in this research were (1) workflow development for an ultrahigh resolution crop surface model (CSM) with the goal of determining plant height (CSM-estimated plant height) using data gathered from the UAS missions; (2) validation of CSM-estimated plant height with ground-truthing plant height (measured plant height); and (3) final estimation of plant biomass via integration of CSM-estimated plant height with ground-truthing stem diameter data. Results indicated a correlation between CSM-estimated plant height and ground-truthing plant height data at two weeks prior to flowering and at flowering stage, but high predictability at the later growth stage. Log-log analysis on the temporal data confirmed that these relationships are stable, presenting equal slopes for both crop stages evaluated. Concluding, data collected from low-altitude and with a low-cost sensor could be useful in estimating plant height.

Automatic rice crop height measurement using a field server and digital image processing.

PubMed

Sritarapipat, Tanakorn; Rakwatin, Preesan; Kasetkasem, Teerasit

2014-01-07

Rice crop height is an important agronomic trait linked to plant type and yield potential. This research developed an automatic image processing technique to detect rice crop height based on images taken by a digital camera attached to a field server. The camera acquires rice paddy images daily at a consistent time of day. The images include the rice plants and a marker bar used to provide a height reference. The rice crop height can be indirectly measured from the images by measuring the height of the marker bar compared to the height of the initial marker bar. Four digital image processing steps are employed to automatically measure the rice crop height: band selection, filtering, thresholding, and height measurement. Band selection is used to remove redundant features. Filtering extracts significant features of the marker bar. The thresholding method is applied to separate objects and boundaries of the marker bar versus other areas. The marker bar is detected and compared with the initial marker bar to measure the rice crop height. Our experiment used a field server with a digital camera to continuously monitor a rice field located in Suphanburi Province, Thailand. The experimental results show that the proposed method measures rice crop height effectively, with no human intervention required.

Fission control system for nuclear reactor

DOEpatents

Conley, G.H.; Estes, G.P.

Control system for nuclear reactor comprises a first set of reactivity modifying rods fixed in a reactor core with their upper ends stepped in height across the core, and a second set of reactivity modifying rods movable vertically within the reactor core and having their lower ends stepped to correspond with the stepped arrangement of the first set of rods, pairs of the rods of the first and second sets being in coaxial alignment.

The determination of gravity anomalies from geoid heights using the inverse Stokes' formula, Fourier transforms, and least squares collocation

NASA Technical Reports Server (NTRS)

Rummel, R.; Sjoeberg, L.; Rapp, R. H.

1978-01-01

A numerical method for the determination of gravity anomalies from geoid heights is described using the inverse Stokes formula. This discrete form of the inverse Stokes formula applies a numerical integration over the azimuth and an integration over a cubic interpolatory spline function which approximates the step function obtained from the numerical integration. The main disadvantage of the procedure is the lack of a reliable error measure. The method was applied on geoid heights derived from GEOS-3 altimeter measurements in the calibration area of the GEOS-3 satellite.

[Growth standardized values and curves based on weight, length/height and head circumference for Chinese children under 7 years of age].

PubMed

Li, Hui

2009-03-01

To construct the growth standardized data and curves based on weight, length/height, head circumference for Chinese children under 7 years of age. Random cluster sampling was used. The fourth national growth survey of children under 7 years in the nine cities (Beijing, Harbin, Xi'an, Shanghai, Nanjing, Wuhan, Fuzhou, Guangzhou and Kunming) of China was performed in 2005 and from this survey, data of 69 760 urban healthy boys and girls were used to set up the database for weight-for-age, height-for-age (length was measured for children under 3 years) and head circumference-for-age. Anthropometric data were ascribed to rigorous methods of data collection and standardized procedures across study sites. LMS method based on BOX-COX normal transformation and cubic splines smoothing technique was chosen for fitting the raw data according to study design and data features, and standardized values of any percentile and standard deviation were obtained by the special formulation of L, M and S parameters. Length-for-age and height-for-age standards were constructed by fitting the same model but the final curves reflected the 0.7 cm average difference between these two measurements. A set of systematic diagnostic tools was used to detect possible biases in estimated percentiles or standard deviation curves, including chi2 test, which was used for reference to evaluate to the goodness of fit. The 3rd, 10th, 25th, 50th, 75th, 90th, 97th smoothed percentiles and -3, -2, -1, 0, +1, +2, +3 SD values and curves of weight-for-age, length/height-for-age and head circumference-for-age for boys and girls aged 0-7 years were made out respectively. The Chinese child growth charts was slightly higher than the WHO child growth standards. The newly established growth charts represented the growth level of healthy and well-nourished Chinese children. The sample size was very large and national, the data were high-quality and the smoothing method was internationally accepted. The new Chinese growth charts are recommended as the Chinese child growth standards in 21st century used in China.

Gain of postural responses increases in response to real and anticipated pain.

PubMed

Hodges, Paul W; Tsao, Henry; Sims, Kevin

2015-09-01

This study tested two contrasting theories of adaptation of postural control to pain. One proposes alteration to the postural strategy including inhibition of muscles that produce painful movement; another proposes amplification of the postural adjustment to recruit strategies normally reserved for higher load. This study that aimed to determine which of these alternatives best explains pain-related adaptation of the hip muscle activity associated with stepping down from steps of increasing height adaptation of postural control to increasing load was evaluated from hip muscle electromyography (fine-wire and surface electrodes) as ten males stepped from steps of increasing height (i.e. increasing load). In one set of trials, participants stepped from a low step (5 cm) and pain was induced by noxious electrical stimulation over the sacrum triggered from foot contact with a force plate or was anticipated. Changes in EMG amplitude and onset timing were compared between conditions. Hip muscle activation was earlier and larger when stepping from higher steps. Although ground reaction forces (one of the determinants of joint load) were unchanged before, during and after pain, trials with real or anticipated noxious stimulation were accompanied by muscle activity indistinguishable from that normally reserved for higher steps (EMG amplitude increased from 9 to 17 % of peak). These data support the notion that muscle activation for postural control is augmented when challenged by real/anticipated noxious stimulation. Muscle activation was earlier and greater than that required for the task and is likely to create unnecessary joint loading. This could have long-term consequences if maintained.

47 CFR 90.205 - Power and antenna height limits.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna HAAT...

47 CFR 90.205 - Power and antenna height limits.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna HAAT...

47 CFR 90.205 - Power and antenna height limits.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna HAAT...

47 CFR 90.205 - Power and antenna height limits.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna HAAT...

47 CFR 90.205 - Power and antenna height limits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna HAAT...

Lack of conformity between Indian classroom furniture and student dimensions: proposed future seat/table dimensions.

PubMed

Savanur, C S; Altekar, C R; De, A

2007-10-01

Children spend one-quarter of a day in school. Of this, 60-80% of time is spent in the classroom. Classroom features, such as workspace and personal space play an important role in children's growth and performance as this age marks the period of anatomical, physiological and psychological developments. Since the classroom is an influential part of a student's life the present study focused on classroom furniture in relation to students' workspace and personal space requirements and standards and was conducted in five schools at Mumbai, India. Dimensions of 104 items of furniture (chairs and desks) were measured as were 42 anthropometric dimensions of 225 students from grade six to grade nine (age: 10-14 years). Questionnaire responses of 292 students regarding the perceived adequacy of their classroom furniture were collected. Results indicated that the seat and desk heights (450 mm, 757 mm respectively) were higher than the comparable students' anthropometric dimensions and that of the recommendations of Bureau of Indian Standards (BIS) (340 + 3 mm, 380 + 3 mm seat-heights, 580 + 3 mm 640 + 3 mm desk-heights) as well as Time-Saver Standards (TSS) (381.0 mm seat-height and 660.4 mm desk-height). The depth of the seats and the desks (299 mm, 319 mm, respectively) were less than comparable students' anthropometric dimensions and the recommendations of BIS (IS 4837: 1990). Students reported discomfort in shoulder, wrist, knee and ankle regions. Based on the students' anthropometric data, proposed future designs with fixed table-heights and adjustable seat-heights along with footrests were identified.

Temperature-modulated annealing of c-plane sapphire for long-range-ordered atomic steps

NASA Astrophysics Data System (ADS)

Yatsui, Takashi; Kuribara, Kazunori; Sekitani, Tsuyoshi; Someya, Takao; Yoshimoto, Mamoru

2016-03-01

High-quality single-crystalline sapphire is used to prepare various semiconductors because of its thermal stability. Here, we applied the tempering technique, which is well known in the production of chocolate, to prepare a sapphire substrate. Surprisingly, we successfully realised millimetre-range ordering of the atomic step of the sapphire substrate. We also obtained a sapphire atomic step with nanometre-scale uniformity in the terrace width and atomic-step height. Such sapphire substrates will find applications in the preparation of various semiconductors and devices.

High degree of BMI misclassification of malnutrition among Swedish elderly population: Age-adjusted height estimation using knee height and demispan

PubMed Central

Gavriilidou, N N; Pihlsgård, M; Elmståhl, S

2015-01-01

Background/Objectives: The degree of misclassification of obesity and undernutrition among elders owing to inaccurate height measurements is investigated using height predicted by knee height (KH) and demispan equations. Subjects/Methods: Cross-sectional investigation was done among a random heterogeneous sample from five municipalities in Southern Sweden from a general population study ‘Good Aging in Skåne' (GÅS). The sample comprised two groups: group 1 (KH) including 2839 GÅS baseline participants aged 60–93 years with a valid KH measurement and group 2 (demispan) including 2871 GÅS follow-up examination participants (1573 baseline; 1298 new), aged 60–99 years, with a valid demispan measurement. Participation rate was 80%. Height, weight, KH and demispan were measured. KH and demispan equations were formulated using linear regression analysis among participants aged 60–64 years as reference. Body mass index (BMI) was calculated in kg/m2. Results: Undernutrition prevalences in men and women were 3.9 and 8.6% by KH, compared with 2.4 and 5.4% by standard BMI, and more pronounced for all women aged 85+ years (21% vs 11.3%). The corresponding value in women aged 85+ years by demispan was 16.5% vs 10% by standard BMI. Obesity prevalences in men and women were 17.5 and 14.6% by KH, compared with 19.0 and 20.03% by standard BMI. Values among women aged 85+ years were 3.7% vs 10.4% by KH and 6.5% vs 12.7% by demispan compared with the standard. Conclusions: There is an age-related misclassification of undernutrition and obesity attributed to inaccurate height estimation among the elderly. This could affect the management of patients at true risk. We therefore propose using KH- and demispan-based formulae to address this issue. PMID:25205322

Response to growth hormone treatment in Prader-Willi syndrome: auxological criteria versus genetic diagnosis.

PubMed

Scheermeyer, Elly; Hughes, Ian; Harris, Mark; Ambler, Geoff; Crock, Patricia; Verge, Charles F; Craig, Maria E; Bergman, Phil; Werther, George; van Driel, Mieke; Davies, Peter Sw; Choong, Catherine S Y

2013-12-01

The Australian Prader-Willi Syndrome (PWS) database was established to monitor the efficacy and safety of growth hormone (GH) treatment in PWS. This study aims to compare response to GH based on eligibility criteria. Comparative study: 72 children received GH on the basis of short stature or evidence of GH deficiency (pre-2009: PWS-SS) and 94 on a genetic diagnosis (post-2009: PWS-Dx). We report on mandatory patient data for GH prescription: median and standard deviation score (SDS) for height and body mass index (BMI), waist/height ratio, bone age/chronological age ratio and adverse events. Comparisons were made using non-parametric tests. At baseline, the PWS-SS cohort was shorter (height SDS: -2.6 vs. -1.1, P < 0.001), had a lower BMI (0.6 vs. 1.5 SDS, P < 0.05) and greater bone age delay (bone age/chronological age: 0.7 vs. 0.9, P < 0.05) than the PWS-Dx cohort. PWS-SS parents were shorter (mid-parental height SDS: -0.13 vs. 0.28, P < 0.005). Mean change in height over 2 years was 0.9 SDS and in BMI using PWS reference standards -0.3 SDSPWS (n = 106) (year 2, height SDS: PWS-SS = -1.7, PWS-Dx = 0.1; BMI SDSPWS : PWS-SS = -1.0, PWS-Dx = -0.6). The waist/height ratio reduced (PWS-Dx: 0.60 vs. 0.56, P < 0.05) and bone age delay was unchanged over this period. No serious adverse events were reported. The PWS-SS cohort represents a subgroup of the wider PWS-Dx population; however both cohorts improved height SDS with normalisation of height in the PWS-Dx cohort and lowering of BMI relative to PWS standards supporting the efficacy of treatment under the current Australian GH programme. © 2013 The Authors. Journal of Paediatrics and Child Health © 2013 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

36 CFR 1192.25 - Doors, steps and thresholds.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Contrast. All step edges, thresholds, and the boarding edge of ramps or lift platforms shall have a band of... lift or ramp surface, either light-on-dark or dark-on-light. (c) Door height. For vehicles in excess of 22 feet in length, the overhead clearance between the top of the door opening and the raised lift...

36 CFR 1192.25 - Doors, steps and thresholds.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Contrast. All step edges, thresholds, and the boarding edge of ramps or lift platforms shall have a band of... lift or ramp surface, either light-on-dark or dark-on-light. (c) Door height. For vehicles in excess of 22 feet in length, the overhead clearance between the top of the door opening and the raised lift...

Age-related differences in the maintenance of frontal plane dynamic stability while stepping to targets

PubMed Central

Hurt, Christopher P.; Grabiner, Mark D.

2015-01-01

Older adults may be vulnerable to frontal plane dynamic instability, which is of clinical significance. The purpose of the current investigation was to examine the age-related differences in frontal plane dynamic stability by quantifying the margin of stability and hip abductor moment generation of subjects performing a single crossover step and sidestep to targets that created three different step widths during forward locomotion. Nineteen young adults (9 males, age: 22.9±3.1 years, height: 174.3±10.2 cm, mass: 71.7±13.0 kg) and 18 older adults (9 males, age: 72.8±5.2 years, height: 174.9±8.6 cm, mass: 78.0±16.3 kg) participated. For each walking trial, subjects performed a single laterally-directed step to a target on a force plate. Subjects were instructed to “perform the lateral step and keep walking forward”. The peak hip abductor moment of the stepping limb was 42% larger by older adults compared to younger adults (p<0.001). Older adults were also more stable than younger adults at all step targets (p<0.001). Older adults executed the lateral step with slower forward-directed and lateral-directed velocity despite similar step widths. Age-related differences in hip abduction moments may reflect greater muscular effort by older adults to reduce the likelihood of becoming unstable. The results of this investigation, in which subjects performed progressively larger lateral-directed steps, provide evidence that older adults may not be more laterally unstable than younger adults. However, age-related differences in this study could also reflect a compensatory strategy by older adults to ensure stability while performing this task. PMID:25627870

Age-related differences in the maintenance of frontal plane dynamic stability while stepping to targets.

PubMed

Hurt, Christopher P; Grabiner, Mark D

2015-02-26

Older adults may be vulnerable to frontal plane dynamic instability, which is of clinical significance. The purpose of the current investigation was to examine the age-related differences in frontal plane dynamic stability by quantifying the margin of stability and hip abductor moment generation of subjects performing a single crossover step and sidestep to targets that created three different step widths during forward locomotion. Nineteen young adults (9 males, age: 22.9±3.1 years, height: 174.3±10.2cm, mass: 71.7±13.0kg) and 18 older adults (9 males, age: 72.8±5.2 years, height: 174.9±8.6cm, mass: 78.0±16.3kg) participated. For each walking trial, subjects performed a single laterally-directed step to a target on a force plate. Subjects were instructed to "perform the lateral step and keep walking forward". The peak hip abductor moment of the stepping limb was 42% larger by older adults compared to younger adults (p<0.001). Older adults were also more stable than younger adults at all step targets (p<0.001). Older adults executed the lateral step with slower forward-directed and lateral-directed velocity despite similar step widths. Age-related differences in hip abduction moments may reflect greater muscular effort by older adults to reduce the likelihood of becoming unstable. The results of this investigation, in which subjects performed progressively larger lateral-directed steps, provide evidence that older adults may not be more laterally unstable than younger adults. However, age-related differences in this study could also reflect a compensatory strategy by older adults to ensure stability while performing this task. Copyright © 2015 Elsevier Ltd. All rights reserved.

Theoretical face pressure and drag characteristics of forward-facing steps in supersonic turbulent boundary layers

NASA Technical Reports Server (NTRS)

Patel, D. K.; Czarnecki, K. R.

1975-01-01

A theoretical investigation of the pressure distributions and drag characteristics was made for forward facing steps in turbulent flow at supersonic speeds. An approximate solution technique proposed by Uebelhack has been modified and extended to obtain a more consistent numerical procedure. A comparison of theoretical calculations with experimental data generally indicated good agreement over the experimentally available range of ratios of step height to boundary layer thickness from 7 to 0.05.

Global variance in female population height: the influence of education, income, human development, life expectancy, mortality and gender inequality in 96 nations.

PubMed

Mark, Quentin J

2014-01-01

Human height is a heritable trait that is known to be influenced by environmental factors and general standard of living. Individual and population stature is correlated with health, education and economic achievement. Strong sexual selection pressures for stature have been observed in multiple diverse populations, however; there is significant global variance in gender equality and prohibitions on female mate selection. This paper explores the contribution of general standard of living and gender inequality to the variance in global female population heights. Female population heights of 96 nations were culled from previously published sources and public access databases. Factor analysis with United Nations international data on education rates, life expectancy, incomes, maternal and childhood mortality rates, ratios of gender participation in education and politics, the Human Development Index (HDI) and the Gender Inequality Index (GII) was run. Results indicate that population heights vary more closely with gender inequality than with population health, income or education.

Genetic and environmental influences on adult human height across birth cohorts from 1886 to 1994.

PubMed

Jelenkovic, Aline; Hur, Yoon-Mi; Sund, Reijo; Yokoyama, Yoshie; Siribaddana, Sisira H; Hotopf, Matthew; Sumathipala, Athula; Rijsdijk, Fruhling; Tan, Qihua; Zhang, Dongfeng; Pang, Zengchang; Aaltonen, Sari; Heikkilä, Kauko; Öncel, Sevgi Y; Aliev, Fazil; Rebato, Esther; Tarnoki, Adam D; Tarnoki, David L; Christensen, Kaare; Skytthe, Axel; Kyvik, Kirsten O; Silberg, Judy L; Eaves, Lindon J; Maes, Hermine H; Cutler, Tessa L; Hopper, John L; Ordoñana, Juan R; Sánchez-Romera, Juan F; Colodro-Conde, Lucia; Cozen, Wendy; Hwang, Amie E; Mack, Thomas M; Sung, Joohon; Song, Yun-Mi; Yang, Sarah; Lee, Kayoung; Franz, Carol E; Kremen, William S; Lyons, Michael J; Busjahn, Andreas; Nelson, Tracy L; Whitfield, Keith E; Kandler, Christian; Jang, Kerry L; Gatz, Margaret; Butler, David A; Stazi, Maria A; Fagnani, Corrado; D'Ippolito, Cristina; Duncan, Glen E; Buchwald, Dedra; Derom, Catherine A; Vlietinck, Robert F; Loos, Ruth Jf; Martin, Nicholas G; Medland, Sarah E; Montgomery, Grant W; Jeong, Hoe-Uk; Swan, Gary E; Krasnow, Ruth; Magnusson, Patrik Ke; Pedersen, Nancy L; Dahl-Aslan, Anna K; McAdams, Tom A; Eley, Thalia C; Gregory, Alice M; Tynelius, Per; Baker, Laura A; Tuvblad, Catherine; Bayasgalan, Gombojav; Narandalai, Danshiitsoodol; Lichtenstein, Paul; Spector, Timothy D; Mangino, Massimo; Lachance, Genevieve; Bartels, Meike; van Beijsterveldt, Toos Cem; Willemsen, Gonneke; Burt, S Alexandra; Klump, Kelly L; Harris, Jennifer R; Brandt, Ingunn; Nilsen, Thomas Sevenius; Krueger, Robert F; McGue, Matt; Pahlen, Shandell; Corley, Robin P; Hjelmborg, Jacob V B; Goldberg, Jack H; Iwatani, Yoshinori; Watanabe, Mikio; Honda, Chika; Inui, Fujio; Rasmussen, Finn; Huibregtse, Brooke M; Boomsma, Dorret I; Sørensen, Thorkild I A; Kaprio, Jaakko; Silventoinen, Karri

2016-12-14

Human height variation is determined by genetic and environmental factors, but it remains unclear whether their influences differ across birth-year cohorts. We conducted an individual-based pooled analysis of 40 twin cohorts including 143,390 complete twin pairs born 1886-1994. Although genetic variance showed a generally increasing trend across the birth-year cohorts, heritability estimates (0.69-0.84 in men and 0.53-0.78 in women) did not present any clear pattern of secular changes. Comparing geographic-cultural regions (Europe, North America and Australia, and East Asia), total height variance was greatest in North America and Australia and lowest in East Asia, but no clear pattern in the heritability estimates across the birth-year cohorts emerged. Our findings do not support the hypothesis that heritability of height is lower in populations with low living standards than in affluent populations, nor that heritability of height will increase within a population as living standards improve.

Accuracy of recumbent height measurement.

PubMed

Gray, D S; Crider, J B; Kelley, C; Dickinson, L C

1985-01-01

Since many patients requiring specialized nutritional support are bedridden, measurement of height for purposes of nutritional assessment or prescription must often be done with the patient in bed. This study examined the accuracy of measuring body height in bed in the supine position. Two measurements were performed on 108 ambulatory inpatients: (1) standing height using a standard height-weight scale, and (2) bed height using a flexible tape. Patients were divided into four groups based on which of two researchers performed each of the two measurements. Each patient was also weighed and self-reported height, weight, sex, and age were recorded. Bed height was significantly longer than standing height by 3.68 cm, but the two measurements were equally precise. It was believed, however, that this 2% difference was probably not clinically significant in most circumstances. Bed height correlated highly with standing height (r = 0.95), and the regression equation was standing height = 13.82 +/- 0.09 bed height. Patients overestimated their heights. Heights recorded by nurses were more accurate when patients were measured than when asked about their heights, but the patients were more often asked than measured.

Childhood malnutrition in Egypt using geoadditive Gaussian and latent variable models.

PubMed

Khatab, Khaled

2010-04-01

Major progress has been made over the last 30 years in reducing the prevalence of malnutrition amongst children less than 5 years of age in developing countries. However, approximately 27% of children under the age of 5 in these countries are still malnourished. This work focuses on the childhood malnutrition in one of the biggest developing countries, Egypt. This study examined the association between bio-demographic and socioeconomic determinants and the malnutrition problem in children less than 5 years of age using the 2003 Demographic and Health survey data for Egypt. In the first step, we use separate geoadditive Gaussian models with the continuous response variables stunting (height-for-age), underweight (weight-for-age), and wasting (weight-for-height) as indicators of nutritional status in our case study. In a second step, based on the results of the first step, we apply the geoadditive Gaussian latent variable model for continuous indicators in which the 3 measurements of the malnutrition status of children are assumed as indicators for the latent variable "nutritional status".

Filler bar heating due to stepped tiles in the shuttle orbiter thermal protection system

NASA Technical Reports Server (NTRS)

Petley, D. H.; Smith, D. M.; Edwards, C. L. W.; Patten, A. B.; Hamilton, H. H., II

1983-01-01

An analytical study was performed to investigate the excessive heating in the tile to tile gaps of the Shuttle Orbiter Thermal Protection System due to stepped tiles. The excessive heating was evidence by visible discoloration and charring of the filler bar and strain isolation pad that is used in the attachment of tiles to the aluminum substrate. Two tile locations on the Shuttle orbiter were considered, one on the lower surface of the fuselage and one on the lower surface of the wing. The gap heating analysis involved the calculation of external and internal gas pressures and temperatures, internal mass flow rates, and the transient thermal response of the thermal protection system. The results of the analysis are presented for the fuselage and wing location for several step heights. The results of a study to determine the effectiveness of a half height ceramic fiber gap filler in preventing hot gas flow in the tile gaps are also presented.

14 CFR 77.23 - Standards for determining obstructions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... each additional nautical mile of distance from the airport up to a maximum of 500 feet. (3) A height... surfaces: (1) A height of 500 feet above ground level at the site of the object. (2) A height that is 200 feet above ground level or above the established airport elevation, whichever is higher, within 3...

14 CFR 77.23 - Standards for determining obstructions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... feet for each additional nautical mile of distance from the airport up to a maximum of 500 feet. (3) A... heights or surfaces: (1) A height of 500 feet above ground level at the site of the object. (2) A height that is 200 feet above ground level or above the established airport elevation, whichever is higher...

A simple biota removal algorithm for 35 GHz cloud radar measurements

NASA Astrophysics Data System (ADS)

Kalapureddy, Madhu Chandra R.; Sukanya, Patra; Das, Subrata K.; Deshpande, Sachin M.; Pandithurai, Govindan; Pazamany, Andrew L.; Ambuj K., Jha; Chakravarty, Kaustav; Kalekar, Prasad; Krishna Devisetty, Hari; Annam, Sreenivas

2018-03-01

Cloud radar reflectivity profiles can be an important measurement for the investigation of cloud vertical structure (CVS). However, extracting intended meteorological cloud content from the measurement often demands an effective technique or algorithm that can reduce error and observational uncertainties in the recorded data. In this work, a technique is proposed to identify and separate cloud and non-hydrometeor echoes using the radar Doppler spectral moments profile measurements. The point and volume target-based theoretical radar sensitivity curves are used for removing the receiver noise floor and identified radar echoes are scrutinized according to the signal decorrelation period. Here, it is hypothesized that cloud echoes are observed to be temporally more coherent and homogenous and have a longer correlation period than biota. That can be checked statistically using ˜ 4 s sliding mean and standard deviation value of reflectivity profiles. The above step helps in screen out clouds critically by filtering out the biota. The final important step strives for the retrieval of cloud height. The proposed algorithm potentially identifies cloud height solely through the systematic characterization of Z variability using the local atmospheric vertical structure knowledge besides to the theoretical, statistical and echo tracing tools. Thus, characterization of high-resolution cloud radar reflectivity profile measurements has been done with the theoretical echo sensitivity curves and observed echo statistics for the true cloud height tracking (TEST). TEST showed superior performance in screening out clouds and filtering out isolated insects. TEST constrained with polarimetric measurements was found to be more promising under high-density biota whereas TEST combined with linear depolarization ratio and spectral width perform potentially to filter out biota within the highly turbulent shallow cumulus clouds in the convective boundary layer (CBL). This TEST technique is promisingly simple in realization but powerful in performance due to the flexibility in constraining, identifying and filtering out the biota and screening out the true cloud content, especially the CBL clouds. Therefore, the TEST algorithm is superior for screening out the low-level clouds that are strongly linked to the rainmaking mechanism associated with the Indian Summer Monsoon region's CVS.

An alternative method for calibration of flow field flow fractionation channels for hydrodynamic radius determination: The nanoemulsion method (featuring multi angle light scattering).

PubMed

Bolinsson, Hans; Lu, Yi; Hall, Stephen; Nilsson, Lars; Håkansson, Andreas

2018-01-19

This study suggests a novel method for determination of the channel height in asymmetrical flow field-flow fractionation (AF4), which can be used for calibration of the channel for hydrodynamic radius determinations. The novel method uses an oil-in-water nanoemulsion together with multi angle light scattering (MALS) and elution theory to determine channel height from an AF4 experiment. The method is validated using two orthogonal methods; first, by using standard particle elution experiments and, secondly, by imaging an assembled and carrier liquid filled channel by x-ray computed tomography (XCT). It is concluded that the channel height can be determined with approximately the same accuracy as with the traditional channel height determination technique. However, the nanoemulsion method can be used under more challenging conditions than standard particles, as the nanoemulsion remains stable in a wider pH range than the previously used standard particles. Moreover, the novel method is also more cost effective. Copyright © 2017 Elsevier B.V. All rights reserved.

Adaptive topographic mass correction for satellite gravity and gravity gradient data

NASA Astrophysics Data System (ADS)

Holzrichter, Nils; Szwillus, Wolfgang; Götze, Hans-Jürgen

2014-05-01

Subsurface modelling with gravity data includes a reliable topographic mass correction. Since decades, this mandatory step is a standard procedure. However, originally methods were developed for local terrestrial surveys. Therefore, these methods often include defaults like a limited correction area of 167 km around an observation point, resampling topography depending on the distance to the station or disregard the curvature of the earth. New satellite gravity data (e.g. GOCE) can be used for large scale lithospheric modelling with gravity data. The investigation areas can include thousands of kilometres. In addition, measurements are located in the flight height of the satellite (e.g. ~250 km for GOCE). The standard definition of the correction area and the specific grid spacing around an observation point was not developed for stations located in these heights and areas of these dimensions. This asks for a revaluation of the defaults used for topographic correction. We developed an algorithm which resamples the topography based on an adaptive approach. Instead of resampling topography depending on the distance to the station, the grids will be resampled depending on its influence at the station. Therefore, the only value the user has to define is the desired accuracy of the topographic correction. It is not necessary to define the grid spacing and a limited correction area. Furthermore, the algorithm calculates the topographic mass response with a spherical shaped polyhedral body. We show examples for local and global gravity datasets and compare the results of the topographic mass correction to existing approaches. We provide suggestions how satellite gravity and gradient data should be corrected.

Measured parental height in Turner syndrome-a valuable but underused diagnostic tool.

PubMed

Ouarezki, Yasmine; Cizmecioglu, Filiz Mine; Mansour, Chourouk; Jones, Jeremy Huw; Gault, Emma Jane; Mason, Avril; Donaldson, Malcolm D C

2018-02-01

Early diagnosis of Turner syndrome (TS) is necessary to facilitate appropriate management, including growth promotion. Not all girls with TS have overt short stature, and comparison with parental height (Ht) is needed for appropriate evaluation. We examined both the prevalence and diagnostic sensitivity of measured parental Ht in a dedicated TS clinic between 1989 and 2013. Lower end of parental target range (LTR) was calculated as mid-parental Ht (correction factor 12.5 cm minus 8.5 cm) and converted to standard deviation scores (SDS) using UK 1990 data, then compared with patient Ht SDS at first accurate measurement aged > 1 year. Information was available in 172 girls of whom 142 (82.6%) were short at first measurement. However, both parents had been measured in only 94 girls (54.6%). In 92 of these girls age at measurement was 6.93 ± 3.9 years, Ht SDS vs LTR SDS - 2.63 ± 0.94 vs - 1.77 ± 0.81 (p < 0.001), Ht SDS < LTR in 78/92 (85%). Eleven of the remaining 14 girls were < 5 years, while karyotype was 45,X/46,XX in 2 and 45,X/47,XXX in 3. This study confirms the sensitivity of evaluating height status against parental height but shows that the latter is not being consistently measured. What is Known: • Girls with Turner syndrome are short in relation to parental heights, with untreated final height approximately 20 cm below female population mean. • Measured parental height is more accurate than reported height. What is New: • In a dedicated Turner clinic, there was 85% sensitivity when comparing patient height standard deviation score at first accurate measurement beyond 1 year of age with the lower end of the parental target range standard deviation. • However, measured height in both parents had been recorded in only 54.6% of the Turner girls attending the clinic. This indicates the need to improve the quality of growth assessment in tertiary care.

Semantic 3d City Model to Raster Generalisation for Water Run-Off Modelling

NASA Astrophysics Data System (ADS)

Verbree, E.; de Vries, M.; Gorte, B.; Oude Elberink, S.; Karimlou, G.

2013-09-01

Water run-off modelling applied within urban areas requires an appropriate detailed surface model represented by a raster height grid. Accurate simulations at this scale level have to take into account small but important water barriers and flow channels given by the large-scale map definitions of buildings, street infrastructure, and other terrain objects. Thus, these 3D features have to be rasterised such that each cell represents the height of the object class as good as possible given the cell size limitations. Small grid cells will result in realistic run-off modelling but with unacceptable computation times; larger grid cells with averaged height values will result in less realistic run-off modelling but fast computation times. This paper introduces a height grid generalisation approach in which the surface characteristics that most influence the water run-off flow are preserved. The first step is to create a detailed surface model (1:1.000), combining high-density laser data with a detailed topographic base map. The topographic map objects are triangulated to a set of TIN-objects by taking into account the semantics of the different map object classes. These TIN objects are then rasterised to two grids with a 0.5m cell-spacing: one grid for the object class labels and the other for the TIN-interpolated height values. The next step is to generalise both raster grids to a lower resolution using a procedure that considers the class label of each cell and that of its neighbours. The results of this approach are tested and validated by water run-off model runs for different cellspaced height grids at a pilot area in Amersfoort (the Netherlands). Two national datasets were used in this study: the large scale Topographic Base map (BGT, map scale 1:1.000), and the National height model of the Netherlands AHN2 (10 points per square meter on average). Comparison between the original AHN2 height grid and the semantically enriched and then generalised height grids shows that water barriers are better preserved with the new method. This research confirms the idea that topographical information, mainly the boundary locations and object classes, can enrich the height grid for this hydrological application.

Trend in Height of Turkish and Moroccan Children Living in The Netherlands

PubMed Central

Schönbeck, Yvonne; van Dommelen, Paula; HiraSing, Remy A.; van Buuren, Stef

2015-01-01

Objectives To study trends in height of Turkish and Moroccan immigrant children living in The Netherlands, to investigate the association between height and background characteristics in these children, and to calculate height-for-age-references data for these groups. Design Nationwide cross-sectional data collection from children aged 0 to 18 years by trained professionals in 1997 and 2009. The study population consisted of 2,822 Turkish 2,779 Moroccan, and 13,705 Dutch origin children in 1997and 2,548 Turkish, 2,594 Moroccan, and 11,255 Dutch origin children in 2009. Main outcome measures: Mean height in cm, and mean height standard deviation scores. Results In 2009, mean height at the age of 18y was similar for Turkish and Moroccan children: 177 cm for boys and 163 cm for girls, which was 2 to 3 cm taller than in 1997. Still, Turkish and Moroccan adolescents were 5.5 cm (boys) to 7 cm (girls) shorter than their Dutch peers. No significant differences were found in mean height standard deviation scores across the educational level of the parents, geographical region, primary language spoken at home, and immigrant generation. Conclusions While the secular height increase in Dutch children came to a halt, the trend in Turkish and Moroccan children living in The Netherlands continued. However, large differences in height between Turkish and Moroccan children and Dutch children remain. We found no association with the background characteristics. We recommend the use of the new growth charts for children of Turkish and Moroccan origin who have a height-for-age below -2SD on the growth chart for Dutch children. PMID:25938671

A comparison of ground reaction force components according to the foothold heights in 16-t truck during downward step.

PubMed

Hyun, Seung-Hyun; Ryew, Che-Cheong

2017-12-01

The aim of this study is to compare and analyze the components of ground reaction force (GRF) relative to the foothold heights during downward step of 16-t truck. Adult males (n= 10) jumped downward from each 1st, 2nd, 3rd foothold step and driver's seat orderly using hand rail. Sampling rate of force components of 3 axis (medial-lateral [ML] GRF, anterior-posterior [AP] GRF, peak vertical force [PVF]), variables (COPx, COPy, COP area) of center of pressure (COP), loading rate, and stability index (ML, AP, vertical, and dynamic postural stability index [DPSI]) processed from GRF system was cut off at 1,000 Hz. and variables was processed with repeated one-way analysis of variance. AP GRF, PVF and loading rate showed higher value in case of not used hand rail than that used hand rail in all 1st, 2nd, and 3rd of foothold step. DPSI showed more lowered stability in order of 2nd, 3rd step than 1st foothold step used with hand rail, of which showed lowest stability from driver's seat. COPx, COPy, and COP area showed higher value in case of 2nd and 3rd than that of 1st of foothold step, and showed lowest stability from driver's seat. It is more desirable for cargo truck driver to utilize an available hand rail in order of 3rd, 2nd, and 1st of foothold step than downward stepping directly, thus by which may results in decrease of falling injuries and minimization of impulsive force transferring to muscular-skeletal system.

49 CFR 38.153 - Doors, steps and thresholds.

Code of Federal Regulations, 2011 CFR

2011-10-01

...)(1) Doors shall have a minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to a minimum width of 18 inches (457 mm). The clear width may be reduced by a maximum of 4 inches (100 mm) by protrusions...

49 CFR 38.153 - Doors, steps and thresholds.

Code of Federal Regulations, 2014 CFR

2014-10-01

...)(1) Doors shall have a minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to a minimum width of 18 inches (457 mm). The clear width may be reduced by a maximum of 4 inches (100 mm) by protrusions...

36 CFR § 1192.153 - Doors, steps and thresholds.

Code of Federal Regulations, 2013 CFR

2013-07-01

... have a minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to a minimum width of 18 inches (457 mm). The clear width may be reduced by a maximum of 4 inches (100 mm) by protrusions of hinges or...

36 CFR 1192.153 - Doors, steps and thresholds.

Code of Federal Regulations, 2012 CFR

2012-07-01

... minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to a minimum width of 18 inches (457 mm). The clear width may be reduced by a maximum of 4 inches (100 mm) by protrusions of hinges or other operating...

49 CFR 38.153 - Doors, steps and thresholds.

Code of Federal Regulations, 2013 CFR

2013-10-01

...)(1) Doors shall have a minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to a minimum width of 18 inches (457 mm). The clear width may be reduced by a maximum of 4 inches (100 mm) by protrusions...

36 CFR 1192.153 - Doors, steps and thresholds.

Code of Federal Regulations, 2014 CFR

2014-07-01

... minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to a minimum width of 18 inches (457 mm). The clear width may be reduced by a maximum of 4 inches (100 mm) by protrusions of hinges or other operating...

36 CFR 1192.153 - Doors, steps and thresholds.

Code of Federal Regulations, 2011 CFR

2011-07-01

... minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to a minimum width of 18 inches (457 mm). The clear width may be reduced by a maximum of 4 inches (100 mm) by protrusions of hinges or other operating...

49 CFR 38.153 - Doors, steps and thresholds.

Code of Federal Regulations, 2012 CFR

2012-10-01

...)(1) Doors shall have a minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to a minimum width of 18 inches (457 mm). The clear width may be reduced by a maximum of 4 inches (100 mm) by protrusions...

In defense of the classical height system

NASA Astrophysics Data System (ADS)

Foroughi, Ismael; Vaníček, Petr; Sheng, Michael; Kingdon, Robert William; Santos, Marcelo C.

2017-11-01

In many European countries, normal heights referred to the quasi-geoid as introduced by Molodenskij in the mid-20th century are preferred to the classical height system that consists of orthometric heights and the geoid as a reference surface for these heights. The rationale for this choice is supposed to be that in the classical height system, neither the geoid, nor the orthometric height can be ever known with centimetre level accuracy because one would need to know the topographical mass density to a level that can never be achieved. The aim of this paper is to question the validity of this rationale. The common way of assessing the congruency of a local geoid model and the orthometric heights is to compare the geoid heights with the difference between orthometric heights provided by leveling and geodetic heights provided by GNSS. On the other hand, testing the congruency of a quasi-geoidal model with normal height a similar procedure is used, except that instead of orthometric heights, normal heights are employed. For the area of Auvergne, France, which is now a more or less standard choice for precise geoid or quasi-geoid testing, only the normal heights are supplied by the Institute Geographic National, the provider of the data. This is clearly the consequence of the European preference for the Molodenskij system. The quality of the height system is to be judged by the congruency of the difference of the geoid/quasi-geoid heights subtracted from the geodetic heights and orthometric/normal heights. To assess the congruency of the classical height system, the Helmert approximation of orthometric heights is typically used as the transformation between normal and Helmert's heights is easily done. However, the evaluation of the differences between Helmert's and the rigorous orthometric heights is somewhat more involved as will be seen from the review in this paper. For the area of interest, the differences between normal and Helmert's heights at the control leveling points range between - 9.5 and 0 cm, differences between Helmert's and the rigorous orthometric heights vary between - 3.6 and 1.1 cm. The local gravimetric geoid model of Auvergne, computed by the Stokes-Helmert technique, is used here to illustrate the accuracy of the classical height system. Results show a very reasonable standard deviation (STD) of 3.2 cm of the differences between geoid values, derived from control leveling points, and gravimetric geoid heights when Helmert's heights are employed and even a smaller STD of 2.9 cm when rigorous orthometric heights are used. A corresponding comparison of a quasi-geoid model, computed by Least-Squares Modification of Stokes method, with normal heights show an STD of 3.4 cm.

Predicting and Projecting Stand Dominant Height From Inventory Data For Young Longleaf Pine Plantations in Southwest Georgia

Treesearch

John R. Brooks

2004-01-01

A stand dominant height prediction technique, based solely on diameter distribution and total height data from standard inventory procedures, was investigated. The data consist of 15 managed longleaf pine (Pinus palustris Mill.) plantations that are part of a growth and yield study located in Worth, Mitchell, and Baker counties in southwest Georgia....

Relationship between LiDAR-derived forest canopy height and Landsat images

Treesearch

Cristina Pascual; Antonio Garcia-Abril; Warren B. Cohen; Susana Martin-Fernandez

2010-01-01

The mean and standard deviation (SD) of light detection and ranging (LiDAR)-derived canopy height are related to forest structure. However, LiDAR data typically cover a limited area and have a high economic cost compared with satellite optical imagery. Optical images may be required to extrapolate LiDAR height measurements across a broad landscape. Different spectral...

The biological standard of living in pre-modern Korea: Determinants of height of militia recruits during the Chosŏn dynasty.

PubMed

Jun, Seong Ho; Lewis, James B; Schwekendiek, Daniel

2017-02-01

This paper extends the research on the biological standard of living in the Korean peninsula back to pre-modern times. Drawing on militia rosters of the Chosŏn Dynasty from the sixteenth to eighteenth centuries, we tentatively conclude that the final height of Korean men during this period was 166cm and thus slightly above that of modern North Korean men (165cm). On the other hand, the average height of modern South Korean men is 172cm, 6cm more than what we tentatively estimate for pre-modern Korean men. Regression analysis of the height of pre-modern Korean men finds that un-free Koreans ("slaves") were significantly shorter by about 0.6-0.7cm than commoners, whereas the average height of recruits suffering from smallpox did not differ significantly from that of other recruits. Moreover, regional, as opposed to birth-dummy, variables account, and to a significant degree, for most of the differences in height. Whether or not this is a result of socioeconomic differences across provinces or a result of other regionally-varying factors remains an open question. Copyright © 2016 Elsevier B.V. All rights reserved.

Joint US Navy/US Air Force climatic study of the upper atmosphere. Volume 7: July

NASA Astrophysics Data System (ADS)

Changery, Michael J.; Williams, Claude N.; Dickenson, Michael L.; Wallace, Brian L.

1989-07-01

The upper atmosphere was studied based on 1980 to 1985 twice daily gridded analysis produced by the European Centre for Medium Range Weather Forecasts. This volume is for the month of July. Included are global analyses of: (1) Mean temperature/standard deviation; (2) Mean geopotential height/standard deviation; (3) Mean density/standard deviation; (4) Height and vector standard deviation (all at 13 pressure levels - 1000, 850, 700, 500, 400, 300, 250, 200, 150, 100, 70, 50, 30 mb); (5) Mean dew point standard deviation at levels 1000 through 30 mb; and (6) Jet stream at levels 500 through 30 mb. Also included are global 5 degree grid point wind roses for the 13 pressure levels.

Joint US Navy/US Air Force climatic study of the upper atmosphere. Volume 10: October

NASA Astrophysics Data System (ADS)

Changery, Michael J.; Williams, Claude N.; Dickenson, Michael L.; Wallace, Brian L.

1989-07-01

The upper atmosphere was studied based on 1980 to 1985 twice daily gridded analysis produced by the European Centre for Medium Range Weather Forecasts. This volume is for the month of October. Included are global analyses of: (1) Mean temperature/standard deviation; (2) Mean geopotential height/standard deviation; (3) Mean density/standard deviation; (4) Height and vector standard deviation (all at 13 pressure levels - 1000, 850, 700, 500, 400, 300, 250, 200, 150, 100, 70, 50, 30 mb); (5) Mean dew point/standard deviation at levels 1000 through 30 mb; and (6) Jet stream at levels 500 through 30 mb. Also included are global 5 degree grid point wind roses for the 13 pressure levels.

Joint US Navy/US Air Force climatic study of the upper atmosphere. Volume 3: March

NASA Astrophysics Data System (ADS)

Changery, Michael J.; Williams, Claude N.; Dickenson, Michael L.; Wallace, Brian L.

1989-11-01

The upper atmosphere was studied based on 1980 to 1985 twice daily gridded analysis produced by the European Centre for Medium Range Weather Forecasts. This volume is for the month of March. Included are global analyses of: (1) Mean Temperature Standard Deviation; (2) Mean Geopotential Height Standard Deviation; (3) Mean Density Standard Deviation; (4) Height and Vector Standard Deviation (all for 13 pressure levels - 1000, 850, 700, 500, 400, 300, 250, 200, 150, 100, 70, 50, 30 mb); (5) Mean Dew Point Standard Deviation for levels 1000 through 30 mb; and (6) Jet stream for levels 500 through 30 mb. Also included are global 5 degree grid point wind roses for the 13 pressure levels.

Joint US Navy/US Air Force climatic study of the upper atmosphere. Volume 2: February

NASA Astrophysics Data System (ADS)

Changery, Michael J.; Williams, Claude N.; Dickenson, Michael L.; Wallace, Brian L.

1989-09-01

The upper atmosphere was studied based on 1980 to 1985 twice daily gridded analyses produced by the European Centre for Medium Range Weather Forecasts. This volume is for the month of February. Included are global analyses of: (1) Mean temperature standard deviation; (2) Mean geopotential height standard deviation; (3) Mean density standard deviation; (4) Height and vector standard deviation (all for 13 pressure levels - 1000, 850, 700, 500, 400, 300, 250, 200, 150, 100, 70, 50, 30 mb); (5) Mean dew point standard deviation for the 13 levels; and (6) Jet stream for levels 500 through 30 mb. Also included are global 5 degree grid point wind roses for the 13 pressure levels.

Joint US Navy/US Air Force climatic study of the upper atmosphere. Volume 4: April

NASA Astrophysics Data System (ADS)

Changery, Michael J.; Williams, Claude N.; Dickenson, Michael L.; Wallace, Brian L.

1989-07-01

The upper atmosphere was studied based on 1980 to 1985 twice daily gridded analyses produced by the European Centre for Medium Range Weather Forecasts. This volume is for the month of April. Included are global analyses of: (1) Mean temperature standard deviation; (2) Mean geopotential height standard deviation; (3) Mean density standard deviation; (4) Height and vector standard deviation (all for 13 pressure levels - 1000, 850, 700, 500, 400, 300, 250, 200, 150, 100, 70, 50, 30 mb); (5) Mean dew point standard deviation for the 13 levels; and (6) Jet stream for levels 500 through 30 mb. Also included are global 5 degree grid point wind roses for the 13 pressure levels.

Geometries for roughness shapes in laminar flow

NASA Technical Reports Server (NTRS)

Holmes, Bruce J. (Inventor); Martin, Glenn L. (Inventor); Domack, Christopher S. (Inventor); Obara, Clifford J. (Inventor); Hassan, Ahmed A. (Inventor)

1986-01-01

A passive interface mechanism between upper and lower skin structures, and a leading edge structure of a laminar flow airfoil is described. The interface mechanism takes many shapes. All are designed to be different than the sharp orthogonal arrangement prevalent in the prior art. The shapes of the interface structures are generally of two types: steps away from the centerline of the airfoil with a sloping surface directed toward the trailing edge and, the other design has a gap before the sloping surface. By properly shaping the step, the critical step height is increased by more than 50% over the orthogonal edged step.

Toe spatiotemporal differences between transition steps when ascending shorter flight stairways of different heights.

PubMed

Ajisafe, Toyin; Wu, Jianhua; Geil, Mark

2017-03-01

Studies have typically treated the first and second floor-to-stair transition steps (TS1 and TS2) as one stride. However, because the foot is devoid of plantar cutaneous input from the stair surface at TS1, these steps may have different toe spatiotemporal profiles, and resultantly, different susceptibilities to a trip and/or a fall. This study compared vertical toe clearance, forward velocity, and their respective variability magnitudes between TS1 and TS2 when ascending stairs of different heights. Twenty young adults (seven males and 13 females) (21.68 ± 2.49 years; 169.70 ± 9.56 cm; 63.91 ± 9.62 kg) negotiated an intervening three-step staircase placed midpoint on a 10 m walkway. There were three stair heights: low stairs (LS), medium stairs (MS), and high stairs (HS). Vertical toe clearance, forward velocity, and their variability magnitudes were calculated. Vertical toe clearance was only higher (P < 0.05) at TS1 than TS2 in the medium and high stairs. Vertical toe clearance was more variable (P < 0.05) in the low compared to medium stairs. Also, forward toe velocity was greater at TS1 than TS2, but was lower in the medium and high stairs. The locomotor system appeared cautious by exaggerating vertical toe clearance at both TS1 and TS2 only in low stairs, possibly due to higher forward toe velocity. If the exaggeration strategy consistently persists, this finding may suggest decreased trip or fall risk at both TS1 and TS2 only when transitioning onto low stairs. Copyright © 2016 Elsevier Ltd. All rights reserved.

The influence of wind speed on airflow and fine particle transport within different building layouts of an industrial city.

PubMed

Mei, Dan; Wen, Meng; Xu, Xuemei; Zhu, Yuzheng; Xing, Futang

2018-04-20

In atmospheric environment, the layout difference of urban buildings has a powerful influence on accelerating or inhibiting the dispersion of particle matters (PM). In industrial cities, buildings of variable heights can obstruct the diffusion of PM from industrial stacks. In this study, PM dispersed within building groups was simulated by Reynolds-averaged Navier-Stokes equations coupled Lagrangian approach. Four typical street building arrangements were used: (a) a low-rise building block with Height/base H/b = 1 (b = 20 m); (b) step-up building layout (H/b = 1, 2, 3, 4); (c) step-down building layout (H/b = 4, 3, 2, 1); (d) high-rise building block (H/b = 5). Profiles of stream functions and turbulence intensity were used to examine the effect of various building layouts on atmospheric airflow. Here, concepts of particle suspension fraction and concentration distribution were used to evaluate the effect of wind speed on fine particle transport. These parameters showed that step-up building layouts accelerated top airflow and diffused more particles into street canyons, likely having adverse effects on resident health. In renewal old industry areas, the step-down building arrangement which can hinder PM dispersion from high-level stacks should be constructed preferentially. High turbulent intensity results in formation of a strong vortex that hinders particles into the street canyons. It is found that an increase in wind speed enhanced particle transport and reduced local particle concentrations, however, it did not affect the relative location of high particle concentration zones, which are related to building height and layout. This study has demonstrated the height variation and layout of urban architecture affect the local concentration distribution of particulate matter (PM) in the atmosphere and for the first time that wind velocity has particular effects on PM transport in various building groups. The findings may have general implications in optimization the building layout based on particle transport characteristics during the renewal of industrial cities. For city planners, the results and conclusions are useful for improving the local air quality. The study method also can be used to calculate the explosion risk of industrial dust for people who live in industrial cities.

Stepping over obstacles: gait patterns of healthy young and old adults.

PubMed

Chen, H C; Ashton-Miller, J A; Alexander, N B; Schultz, A B

1991-11-01

Falls associated with tripping over an obstacle can be devastating to elderly individuals, yet little is known about the strategies used for stepping over obstacles by either old or young adults. The gait of gender-matched groups of 24 young and 24 old healthy adults (mean ages 22 and 71 years) was studied during a 4 m approach to and while stepping over obstacles of 0, 25, 51, or 152 mm height and in level obstacle-free walking. Optoelectronic cameras and recorders were used to record approach and obstacle crossing speeds as well as bilateral lower extremity kinematic parameters that described foot placement and movement trajectories relative to the obstacle. The results showed that age had no effect on minimum swing foot clearance (FC) over an obstacle. For the 25 mm obstacle, mean FC was 64 mm, or approximately three times that used in level gait; FC increased nonlinearly with obstacle height for all subjects. Although no age differences were found in obstacle-free gait, old adults exhibited a significantly more conservative strategy when crossing obstacles, with slower crossing speed, shorter step length, and shorter obstacle-heel strike distance. In addition, the old adults crossed the obstacle so that it was 10% further forward in their obstacle-crossing step. Although all subjects successfully avoided the riskiest form of obstacle contact, tripping, 4/24 healthy old adults stepped on an obstacle, demonstrating an increased risk for obstacle contact with age.

Development of large Area Covering Height Model

NASA Astrophysics Data System (ADS)

Jacobsen, K.

2014-04-01

Height information is a basic part of topographic mapping. Only in special areas frequent update of height models is required, usually the update cycle is quite lower as for horizontal map information. Some height models are available free of charge in the internet; for commercial height models a fee has to be paid. Mostly digital surface models (DSM) with the height of the visible surface are given and not the bare ground height, as required for standard mapping. Nevertheless by filtering of DSM, digital terrain models (DTM) with the height of the bare ground can be generated with the exception of dense forest areas where no height of the bare ground is available. These height models may be better as the DTM of some survey administrations. In addition several DTM from national survey administrations are classified, so as alternative the commercial or free of charge available information from internet can be used. The widely used SRTM DSM is available also as ACE-2 GDEM corrected by altimeter data for systematic height errors caused by vegetation and orientation errors. But the ACE-2 GDEM did not respect neighbourhood information. With the worldwide covering TanDEM-X height model, distributed starting 2014 by Airbus Defence and Space (former ASTRIUM) as WorldDEM, higher level of details and accuracy is reached as with other large area covering height models. At first the raw-version of WorldDEM will be available, followed by an edited version and finally as WorldDEM-DTM a height model of the bare ground. With 12 m spacing and a relative standard deviation of 1.2 m within an area of 1° x 1° an accuracy and resolution level is reached, satisfying also for larger map scales. For limited areas with the HDEM also a height model with 6 m spacing and a relative vertical accuracy of 0.5 m can be generated on demand. By bathymetric LiDAR and stereo images also the height of the sea floor can be determined if the water has satisfying transparency. Another method of getting bathymetric height information is an analysis of the wave structure in optical and SAR-images. An overview about the absolute and relative accuracy, the consistency, error distribution and other characteristics as influence of terrain inclination and aspects is given. Partially by post processing the height models can or have to be improved.

Progressive Decline in Height Standard Deviation Scores in the First 5 Years of Life Distinguished Idiopathic Growth Hormone Deficiency from Familial Short Stature and Constitutional Delay of Growth.

PubMed

Rothermel, Juliane; Lass, Nina; Toschke, Christina; Reinehr, Thomas

2016-01-01

Familial short stature (FSS) and constitutional delay of growth (CDG) are the most frequent norm variants in children presenting with short stature. Knowing the growth patterns of these entities in the first years of life might be helpful to distinguish them from growth hormone deficiency (GHD) or other chronic diseases. We studied the height in the first 5 years of life in 26 children with FSS, in 38 children with CDG and in 14 children with idiopathic GHD. Height standard deviation scores (SDS) did not change between birth and 6 months of life, while height SDS decreased significantly afterwards in GHD, FSS, and CDG. The loss of height SDS was higher in the first 2 years of life than between 2 and 5 years of life in children with CDG (-0.92 vs. -0.11; p = 0.003) or FSS (-0.79 vs. -0.01; p = 0.002). In idiopathic GHD, the loss of height SDS did not differ between the first 2 years of life and the next 3 years (-0.78 vs. -0.77; p = 0.821). Children with FSS and CDG showed a decline in height SDS mainly in the first 2 years of life, whereas the height SDS of children with idiopathic GHD decreased almost continuously over the first 5 years of life. © 2016 S. Karger AG, Basel.

Age-related self-overestimation of step-over ability in healthy older adults and its relationship to fall risk.

PubMed

Sakurai, Ryota; Fujiwara, Yoshinori; Ishihara, Masami; Higuchi, Takahiro; Uchida, Hayato; Imanaka, Kuniyasu

2013-05-07

Older adults could not safely step over an obstacle unless they correctly estimated their physical ability to be capable of a successful step over action. Thus, incorrect estimation (overestimation) of ability to step over an obstacle could result in severe accident such as falls in older adults. We investigated whether older adults tended to overestimate step-over ability compared with young adults and whether such overestimation in stepping over obstacles was associated with falls. Three groups of adults, young-old (age, 60-74 years; n, 343), old-old (age, >74 years; n, 151), and young (age, 18-35 years; n, 71), performed our original step-over test (SOT). In the SOT, participants observed a horizontal bar at a 7-m distance and estimated the maximum height (EH) that they could step over. After estimation, they performed real SOT trials to measure the actual maximum height (AH). We also identified participants who had experienced falls in the 1 year period before the study. Thirty-nine young-old adults (11.4%) and 49 old-old adults (32.5%) failed to step over the bar at EH (overestimation), whereas all young adults succeeded (underestimation). There was a significant negative correlation between actual performance (AH) and self-estimation error (difference between EH and AH) in the older adults, indicating that older adults with lower AH (SOT ability) tended to overestimate actual ability (EH > AH) and vice versa. Furthermore, the percentage of participants who overestimated SOT ability in the fallers (28%) was almost double larger than that in the non-fallers (16%), with the fallers showing significantly lower SOT ability than the non-fallers. Older adults appear unaware of age-related physical decline and tended to overestimate step-over ability. Both age-related decline in step-over ability, and more importantly, overestimation or decreased underestimation of this ability may raise potential risk of falls.

Age-related self-overestimation of step-over ability in healthy older adults and its relationship to fall risk

PubMed Central

2013-01-01

Background Older adults could not safely step over an obstacle unless they correctly estimated their physical ability to be capable of a successful step over action. Thus, incorrect estimation (overestimation) of ability to step over an obstacle could result in severe accident such as falls in older adults. We investigated whether older adults tended to overestimate step-over ability compared with young adults and whether such overestimation in stepping over obstacles was associated with falls. Methods Three groups of adults, young-old (age, 60–74 years; n, 343), old-old (age, >74 years; n, 151), and young (age, 18–35 years; n, 71), performed our original step-over test (SOT). In the SOT, participants observed a horizontal bar at a 7-m distance and estimated the maximum height (EH) that they could step over. After estimation, they performed real SOT trials to measure the actual maximum height (AH). We also identified participants who had experienced falls in the 1 year period before the study. Results Thirty-nine young-old adults (11.4%) and 49 old-old adults (32.5%) failed to step over the bar at EH (overestimation), whereas all young adults succeeded (underestimation). There was a significant negative correlation between actual performance (AH) and self-estimation error (difference between EH and AH) in the older adults, indicating that older adults with lower AH (SOT ability) tended to overestimate actual ability (EH > AH) and vice versa. Furthermore, the percentage of participants who overestimated SOT ability in the fallers (28%) was almost double larger than that in the non-fallers (16%), with the fallers showing significantly lower SOT ability than the non-fallers. Conclusions Older adults appear unaware of age-related physical decline and tended to overestimate step-over ability. Both age-related decline in step-over ability, and more importantly, overestimation or decreased underestimation of this ability may raise potential risk of falls. PMID:23651772

Genetic and environmental influences on adult human height across birth cohorts from 1886 to 1994

PubMed Central

Jelenkovic, Aline; Hur, Yoon-Mi; Sund, Reijo; Yokoyama, Yoshie; Siribaddana, Sisira H; Hotopf, Matthew; Sumathipala, Athula; Rijsdijk, Fruhling; Tan, Qihua; Zhang, Dongfeng; Pang, Zengchang; Aaltonen, Sari; Heikkilä, Kauko; Öncel, Sevgi Y; Aliev, Fazil; Rebato, Esther; Tarnoki, Adam D; Tarnoki, David L; Christensen, Kaare; Skytthe, Axel; Kyvik, Kirsten O; Silberg, Judy L; Eaves, Lindon J; Maes, Hermine H; Cutler, Tessa L; Hopper, John L; Ordoñana, Juan R; Sánchez-Romera, Juan F; Colodro-Conde, Lucia; Cozen, Wendy; Hwang, Amie E; Mack, Thomas M; Sung, Joohon; Song, Yun-Mi; Yang, Sarah; Lee, Kayoung; Franz, Carol E; Kremen, William S; Lyons, Michael J; Busjahn, Andreas; Nelson, Tracy L; Whitfield, Keith E; Kandler, Christian; Jang, Kerry L; Gatz, Margaret; Butler, David A; Stazi, Maria A; Fagnani, Corrado; D'Ippolito, Cristina; Duncan, Glen E; Buchwald, Dedra; Derom, Catherine A; Vlietinck, Robert F; Loos, Ruth JF; Martin, Nicholas G; Medland, Sarah E; Montgomery, Grant W; Jeong, Hoe-Uk; Swan, Gary E; Krasnow, Ruth; Magnusson, Patrik KE; Pedersen, Nancy L; Dahl-Aslan, Anna K; McAdams, Tom A; Eley, Thalia C; Gregory, Alice M; Tynelius, Per; Baker, Laura A; Tuvblad, Catherine; Bayasgalan, Gombojav; Narandalai, Danshiitsoodol; Lichtenstein, Paul; Spector, Timothy D; Mangino, Massimo; Lachance, Genevieve; Bartels, Meike; van Beijsterveldt, Toos CEM; Willemsen, Gonneke; Burt, S Alexandra; Klump, Kelly L; Harris, Jennifer R; Brandt, Ingunn; Nilsen, Thomas Sevenius; Krueger, Robert F; McGue, Matt; Pahlen, Shandell; Corley, Robin P; Hjelmborg, Jacob v B; Goldberg, Jack H; Iwatani, Yoshinori; Watanabe, Mikio; Honda, Chika; Inui, Fujio; Rasmussen, Finn; Huibregtse, Brooke M; Boomsma, Dorret I; Sørensen, Thorkild I A; Kaprio, Jaakko; Silventoinen, Karri

2016-01-01

Human height variation is determined by genetic and environmental factors, but it remains unclear whether their influences differ across birth-year cohorts. We conducted an individual-based pooled analysis of 40 twin cohorts including 143,390 complete twin pairs born 1886–1994. Although genetic variance showed a generally increasing trend across the birth-year cohorts, heritability estimates (0.69-0.84 in men and 0.53-0.78 in women) did not present any clear pattern of secular changes. Comparing geographic-cultural regions (Europe, North America and Australia, and East Asia), total height variance was greatest in North America and Australia and lowest in East Asia, but no clear pattern in the heritability estimates across the birth-year cohorts emerged. Our findings do not support the hypothesis that heritability of height is lower in populations with low living standards than in affluent populations, nor that heritability of height will increase within a population as living standards improve. DOI: http://dx.doi.org/10.7554/eLife.20320.001 PMID:27964777

Effect of growth hormone treatment on the adult height of children with chronic renal failure. German Study Group for Growth Hormone Treatment in Chronic Renal Failure.

PubMed

Haffner, D; Schaefer, F; Nissel, R; Wühl, E; Tönshoff, B; Mehls, O

2000-09-28

Growth hormone treatment stimulates growth in short children with chronic renal failure. However, the extent to which this therapy increases final adult height is not known. We followed 38 initially prepubertal children with chronic renal failure treated with growth hormone for a mean of 5.3 years until they reached their final adult height. The mean (+/-SD) age at the start of treatment was 10.4+/-2.2 years, the mean bone age was 7.1+/-2.3 years, and the mean height was 3.1+/-1.2 SD below normal. Fifty matched children with chronic renal failure who were not treated with growth hormone served as controls. The children treated with growth hormone had sustained catch-up growth, whereas the control children had progressive growth failure. The mean final height of the growth hormone-treated children was 165 cm for boys and 156 cm for girls. The mean final adult height of the growth hormone-treated children was 1.6+/-1.2 SD below normal, which was 1.4 SD above their standardized height at base line (P< 0.001). In contrast, the final height of the untreated children (2.1+/-1.2 SD below normal) was 0.6 SD below their standardized height at base line (P<0.001). Although prepubertal bone maturation was accelerated in growth hormone-treated children, treatment was not associated with a shortening of the pubertal growth spurt. The total height gain was positively associated with the initial target-height deficit and the duration of growth hormone therapy and was negatively associated with the percentage of the observation period spent receiving dialysis treatment. Long-term growth hormone treatment of children with chronic renal failure induces persistent catch-up growth, and the majority of patients achieve normal adult height.

Atomic Resolution in Situ Imaging of a Double-Bilayer Multistep Growth Mode in Gallium Nitride Nanowires

DOE PAGES

Gamalski, A. D.; Tersoff, J.; Stach, E. A.

2016-04-13

We study the growth of GaN nanowires from liquid Au–Ga catalysts using environmental transmission electron microscopy. GaN wires grow in either (11¯20) or (11¯00) directions, by the addition of {11¯00} double bilayers via step flow with multiple steps. Step-train growth is not typically seen with liquid catalysts, and we suggest that it results from low step mobility related to the unusual double-height step structure. Finally, the results here illustrate the surprising dynamics of catalytic GaN wire growth at the nanoscale and highlight striking differences between the growth of GaN and other III–V semiconductor nanowires.

Age at menarche in relation to adult height: the EPIC study.

PubMed

Onland-Moret, N C; Peeters, P H M; van Gils, C H; Clavel-Chapelon, F; Key, T; Tjønneland, A; Trichopoulou, A; Kaaks, R; Manjer, J; Panico, S; Palli, D; Tehard, B; Stoikidou, M; Bueno-De-Mesquita, H B; Boeing, H; Overvad, K; Lenner, P; Quirós, J R; Chirlaque, M D; Miller, A B; Khaw, K T; Riboli, E

2005-10-01

In the last two centuries, age at menarche has decreased in several European populations, whereas adult height has increased. It is unclear whether these trends have ceased in recent years or how age at menarche and height are related in individuals. In this study, the authors first investigated trends in age at menarche and adult height among 286,205 women from nine European countries by computing the mean age at menarche and height in 5-year birth cohorts, adjusted for differences in socioeconomic status. Second, the relation between age at menarche and height was estimated by linear regression models, adjusted for age at enrollment between 1992 and 1998 and socioeconomic status. Mean age at menarche decreased by 44 days per 5-year birth cohort (beta = -0.12, standard error = 0.002), varying from 18 days in the United Kingdom to 58 days in Spain and Germany. Women grew 0.29 cm taller per 5-year birth cohort (standard error = 0.007), varying from 0.42 cm in Italy to 0.98 cm in Denmark. Furthermore, women grew approximately 0.31 cm taller when menarche occurred 1 year later (range by country: 0.13-0.50 cm). Based on time trends, more recent birth cohorts have their menarche earlier and grow taller. However, women with earlier menarche reach a shorter adult height compared with women who have menarche at a later age.

Sickle cell disease diagnosis based on spatio-temporal cell dynamics analysis using 3D printed shearing digital holographic microscopy.

PubMed

Javidi, Bahram; Markman, Adam; Rawat, Siddharth; O'Connor, Timothy; Anand, Arun; Andemariam, Biree

2018-05-14

We present a spatio-temporal analysis of cell membrane fluctuations to distinguish healthy patients from patients with sickle cell disease. A video hologram containing either healthy red blood cells (h-RBCs) or sickle cell disease red blood cells (SCD-RBCs) was recorded using a low-cost, compact, 3D printed shearing interferometer. Reconstructions were created for each hologram frame (time steps), forming a spatio-temporal data cube. Features were extracted by computing the standard deviations and the mean of the height fluctuations over time and for every location on the cell membrane, resulting in two-dimensional standard deviation and mean maps, followed by taking the standard deviations of these maps. The optical flow algorithm was used to estimate the apparent motion fields between subsequent frames (reconstructions). The standard deviation of the magnitude of the optical flow vectors across all frames was then computed. In addition, seven morphological cell (spatial) features based on optical path length were extracted from the cells to further improve the classification accuracy. A random forest classifier was trained to perform cell identification to distinguish between SCD-RBCs and h-RBCs. To the best of our knowledge, this is the first report of machine learning assisted cell identification and diagnosis of sickle cell disease based on cell membrane fluctuations and morphology using both spatio-temporal and spatial analysis.

Calculate Your Body Mass Index

MedlinePlus

... Professional Resources Calculate Your Body Mass Index Body mass index (BMI) is a measure of body fat based on height and weight that applies to adult men and women. Enter your weight and height using standard or metric measures. Select "Compute BMI" and your ...

Simultaneous growth of self-patterned carbon nanotube forests with dual height scales

NASA Astrophysics Data System (ADS)

Sam, Ebru Devrim; Kucukayan-Dogu, Gokce; Baykal, Beril; Dalkilic, Zeynep; Rana, Kuldeep; Bengu, Erman

2012-05-01

In this study, we report on a unique, one-step fabrication technique enabling the simultaneous synthesis of vertically aligned multi-walled carbon nanotubes (VA-MWCNTs) with dual height scales through alcohol catalyzed chemical vapor deposition (ACCVD). Regions of VA-MWCNTs with different heights were well separated from each other leading to a self-patterning on the surface. We devised a unique layer-by-layer process for application of catalyst and inhibitor precursors on oxidized Si (100) surfaces before the ACCVD step to achieve a hierarchical arrangement. Patterning could be controlled by adjusting the molarity and application sequence of precursors. Contact angle measurements on these self-patterned surfaces indicated that manipulation of these hierarchical arrays resulted in a wide range of hydrophobic behavior changing from that of a sticky rose petal to a lotus leaf.In this study, we report on a unique, one-step fabrication technique enabling the simultaneous synthesis of vertically aligned multi-walled carbon nanotubes (VA-MWCNTs) with dual height scales through alcohol catalyzed chemical vapor deposition (ACCVD). Regions of VA-MWCNTs with different heights were well separated from each other leading to a self-patterning on the surface. We devised a unique layer-by-layer process for application of catalyst and inhibitor precursors on oxidized Si (100) surfaces before the ACCVD step to achieve a hierarchical arrangement. Patterning could be controlled by adjusting the molarity and application sequence of precursors. Contact angle measurements on these self-patterned surfaces indicated that manipulation of these hierarchical arrays resulted in a wide range of hydrophobic behavior changing from that of a sticky rose petal to a lotus leaf. Electronic supplementary information (ESI) available: Fig. S1; AFM image of the Co-O layer which was first dried at 40 °C and then oxidized at 200 °C. Fig. S2; graph relative to the area of CNT islands for different catalyst configurations. Fig. S3; representative XPS spectra of (a) Si 2p, (b) Al 2p, (c) Fe 2p and (d) Co 2p for a reduced Al/Fe/Al/Co (20/20/20/20) catalyst film (grey line in all figures shows the peak backgrounds and orange line shows the curve fitted). Contact angle movies, Video S1 and Video S2, of Al/Fe/Al/Co samples 40/20/20/20 and 20/40/20/20, respectively. See DOI: 10.1039/c2nr30258f

Separated and Recovering Turbulent Boundary Layer Flow Behind a Backward Facing Step For Different Reynolds Numbers

NASA Technical Reports Server (NTRS)

Jovic, Srba; Kutler, Paul F. (Technical Monitor)

1994-01-01

Experimental results for a two-dimensional separated turbulent boundary layer behind a backward facing step for five different Reynolds numbers are reported. Results are presented in the form of tables, graphs and a floppy disk for an easy access of the data. Reynolds number based on the step height was varied by changing the reference velocity upstream of the step, U(sub o), and the step height, h. Hot-wire measurement techniques were used to measure three Reynolds stresses and four triple-velocity correlations. In addition, surface pressure and skin friction coefficients were measured. All hot-wire measurements were acquired in a measuring domain which excluded recirculating flow region due to the directional insensitivity of hot-wires. The downstream extent of the domain from the step was 51 h for the largest and I 14h for the smallest step height. This significant downstream length permitted extensive study of the flow recovery. Prediction of perturbed flows and their recovery is particularly attractive for popular turbulence models since variations of turbulence length and time scales and flow interactions in different regions are generally inadequately predicted. The data indicate that the flow in the free shear layer region behaves like the plane mixing layer up to about 2/3 of the mean reattachment length when the flow interaction with the wall commences the flow recovery to that of an ordinary turbulent boundary layer structure. These changes of the flow do not occur abruptly with the change of boundary conditions. A reattachment region represents a transitional region where the flow undergoes the most dramatic adjustments to the new boundary conditions. Large eddies, created in the upstream free-shear layer region, are being torn, recirculated, reentrained back into the main stream interacting with the incoming flow structure. It is foreseeable that it is quite difficult to describe the physics of this region in a rational and quantitative manner other than statistical. Downstream of the reattachment point the flow recovers at different rates near the wall, in the newly developing internal boundary layer, and in the outer part of the flow. It appears that Reynolds stresses do not fully recover up to the longest recovery length of 114 h.

A theoretically based determination of bowen-ratio fetch requirements

USGS Publications Warehouse

Stannard, D.I.

1997-01-01

Determination of fetch requirements for accurate Bowen-ratio measurements of latent- and sensible-heat fluxes is more involved than for eddy-correlation measurements because Bowen-ratio sensors are located at two heights, rather than just one. A simple solution to the diffusion equation is used to derive an expression for Bowen-ratio fetch requirements, downwind of a step change in surface fluxes. These requirements are then compared to eddy-correlation fetch requirements based on the same diffusion equation solution. When the eddy-correlation and upper Bowen-ratio sensor heights are equal, and the available energy upwind and downwind of the step change is constant, the Bowen-ratio method requires less fetch than does eddy correlation. Differences in fetch requirements between the two methods are greatest over relatively smooth surfaces. Bowen-ratio fetch can be reduced significantly by lowering the lower sensor, as well as the upper sensor. The Bowen-ratio fetch model was tested using data from a field experiment where multiple Bowen-ratio systems were deployed simultaneously at various fetches and heights above a field of bermudagrass. Initial comparisons were poor, but improved greatly when the model was modified (and operated numerically) to account for the large roughness of the upwind cotton field.

Recovery and purification of chitosanase produced by Bacillus cereus using expanded bed adsorption and central composite design.

PubMed

de Araújo, Nathália Kelly; Pimentel, Vanessa Carvalho; da Silva, Nayane Macedo Portela; de Araújo Padilha, Carlos Eduardo; de Macedo, Gorete Ribeiro; Dos Santos, Everaldo Silvino

2016-02-01

This study presents a system for expanded bed adsorption for the purification of chitosanase from broth extract in a single step. A chitosanase-producing strain was isolated and identified as Bacillus cereus C-01 and used to produce chitosanases. The expanded bed adsorption conditions for chitosanase purification were optimized statistically using STREAMLINE(TM) DEAE and a homemade column (2.6 × 30.0 cm). Dependent variables were defined by the quality criteria purification factor (P) and enzyme yield to optimize the chromatographic process. Statistical analyses showed that the optimum conditions for the maximum P were 150 cm/h load flow velocity, 6.0 cm settled bed height, and 7.36 cm distributor height. Distributor height had a strong influence on the process, considerably affecting both the P and enzyme yield. Optimizing the purification variables resulted in an approximately 3.66-fold increase in the P compared with the value under nonoptimized conditions. This system is promising for the recovery of chitosanase from B. cereus C-01 and is economically viable because it promotes the reduction steps. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Universality of (2+1)-dimensional restricted solid-on-solid models

NASA Astrophysics Data System (ADS)

Kelling, Jeffrey; Ódor, Géza; Gemming, Sibylle

2016-08-01

Extensive dynamical simulations of restricted solid-on-solid models in D =2 +1 dimensions have been done using parallel multisurface algorithms implemented on graphics cards. Numerical evidence is presented that these models exhibit Kardar-Parisi-Zhang surface growth scaling, irrespective of the step heights N . We show that by increasing N the corrections to scaling increase, thus smaller step-sized models describe better the asymptotic, long-wave-scaling behavior.

Development of annualized diameter and height growth equations for red alder: preliminary results.

Treesearch

Aaron Weiskittel; Sean M. Garber; Greg Johnson; Doug Maguire; Robert A. Monserud

2006-01-01

Most individual-tree based growth and yield models use a 5- to 10-year time step, which can make projections for a fast-growing species like red alder quite difficult. Further, it is rather cumbersome to simulate the effects of intensive silvicultural treatments such as thinning or pruning on a time step longer than one year given the highly dynamic nature of growth...

Vertical Stability of Ephemeral Step-Pool Streams Largely Controlled By Tree Roots, Central Kentucky, USA

NASA Astrophysics Data System (ADS)

Macmannis, K. R.; Hawley, R. J.

2013-12-01

The mechanisms controlling stability on small streams in steep settings are not well documented but have many implications related to stream integrity and water quality. For example, channel instability on first and second order streams is a potential source of sediment in regulated areas with Total Maximum Daily Loads (TMDLs) on water bodies that are impaired for sedimentation, such as the Chesapeake Bay. Management strategies that preserve stream integrity and protect channel stability are critical to communities that may otherwise require large capital investments to meet TMDLs and other water quality criteria. To contribute to an improved understanding of ephemeral step-pool systems, we collected detailed hydrogeomorphic data on 4 steep (0.06 - 0.12 meter/meter) headwater streams draining to lower relief alluvial valleys in Spencer County, Kentucky, USA. The step-pool streams (mean step height of 0.47 meter, mean step spacing of 4 meters) drained small undeveloped catchments dominated by early successional forest. Data collection for each of the 4 streams included 2 to 3 cross section surveys, bed material particle counts at cross section locations, and profile surveys ranging from approximately 125 to 225 meters in length. All survey data was systematically processed to understand geometric parameters such as cross sectional area, depth, and top width; bed material gradations; and detailed profile measurements such as slope, pool and riffle lengths, pool spacing, pool depth, step height, and step length. We documented the location, frequency, and type of step-forming materials (i.e., large woody debris (LWD), rock, and tree roots), compiling a database of approximately 130 total steps. Lastly, we recorded a detailed tree assessment of all trees located within 2 meters of the top of bank, detailing the species of tree, trunk diameter, and approximate distance from the top of bank. Analysis of geometric parameters illustrated correlations between channel characteristics (e.g., step height was positively correlated to slope while pool spacing was inversely correlated to slope). Most importantly, we assessed the step-forming materials with respect to channel stability. LWD has been widely documented as an important component of geomorphic stability and habitat diversity across many settings; however, our research highlights the importance of roots in providing bed stability in steep, first and second-order ephemeral streams, as 40 percent of the steps in these step-pool systems were controlled by tree roots. Similar to the key member in naturally-occurring log jams, lateral tree roots frequently served as the anchor for channel steps that were often supplemented by rocks or LWD. Assessment of the trees throughout the riparian zone suggested average tree densities of 0.30 trees/square meter or 0.40 trees/meter could provide adequate riparian zone coverage to promote channel stability. These results have implications to land use planning and stormwater management. For example, on developments draining to step-pool systems, maintaining the integrity of the riparian zone would seem to be as important as ensuring hydrologic mimicry if channel integrity is to be preserved.

Effect of infliximab top-down therapy on weight gain in pediatric Crohns disease.

PubMed

Kim, Mi Jin; Lee, Woo Yong; Choi, Kyong Eun; Choe, Yon Ho

2012-12-01

This retrospective-medical-record review was conducted to evaluate effect of infliximab therapy, particularly with a top-down strategy, on the nutritional parameters of children with Crohns disease (CD). 42 patients who were diagnosed with Crohns disease at the Pediatric Gastroenterology center of a tertiary care teaching hospital and achieved remission at two months and one year after beginning of treatment were divided into four subgroups according to the treatment regimen; azathioprine group (n = 11), steroid group (n = 11), infliximab top-down group (n = 11) and step-up group (n = 9). Weight, height, and serum albumin were measured at diagnosis, and then at two months and one year after the initiation of treatment. At 2 months, the Z score increment for weight was highest in the steroid group, followed by the top-down, step-up, and azathioprine groups. At one year, the Z score increment was highest in top-down group, followed by steroid, azathioprine, and step-up group. There were no significant differences between the four groups in Z score increment for height and serum albumin during the study period. The top-down infliximab treatment resulted in superior outcome for weight gain, compared to the step-up therapy and other treatment regimens.

Analysis of video-recorded images to determine linear and angular dimensions in the growing horse.

PubMed

Hunt, W F; Thomas, V G; Stiefel, W

1999-09-01

Studies of growth and conformation require statistical methods that are not applicable to subjective conformation standards used by breeders and trainers. A new system was developed to provide an objective approach for both science and industry, based on analysis of video images to measure aspects of conformation that were represented by angles or lengths. A studio crush was developed in which video images of horses of different sizes were taken after bone protuberances, located by palpation, were marked with white paper stickers. Screen pixel coordinates of calibration marks, bone markers and points on horse outlines were digitised from captured images and corrected for aspect ratio and 'fish-eye' lens effects. Calculations from the corrected coordinates produced linear dimensions and angular dimensions useful for comparison of horses for conformation and experimental purposes. The precision achieved by the method in determining linear and angular dimensions was examined through systematically determining variance for isolated steps of the procedure. Angles of the front limbs viewed from in front were determined with a standard deviation of 2-5 degrees and effects of viewing angle were detectable statistically. The height of the rump and wither were determined with precision closely related to the limitations encountered in locating a point on a screen, which was greater for markers applied to the skin than for points at the edge of the image. Parameters determined from markers applied to the skin were, however, more variable (because their relation to bone position was affected by movement), but still provided a means by which a number of aspects of size and conformation can be determined objectively for many horses during growth. Sufficient precision was achieved to detect statistically relatively small effects on calculated parameters of camera height position.

Growth references for Tsimane forager-horticulturalists of the Bolivian Amazon

PubMed Central

Blackwell, Aaron D.; Urlacher, Samuel S.; Beheim, Bret; von Rueden, Christopher; Jaeggi, Adrian; Stieglitz, Jonathan; Trumble, Benjamin C.; Gurven, Michael; Kaplan, Hillard

2016-01-01

Objectives Growth standards and references currently used to assess population and individual health are derived primarily from urban populations, including few individuals from indigenous or subsistence groups. Given environmental and genetic differences, growth may vary in these populations. Thus, there is a need to assess whether international standards are appropriate for all populations, and to produce population specific references if growth differs. Here we present and assess growth references for the Tsimane, an indigenous population of Bolivian forager-horticulturalists. Methods Mixed cross-sectional/longitudinal anthropometrics (9,614 individuals; 30,118 observations; ages 0–29 years) were used to generate centile curves and Lambda-Mu-Sigma (LMS) tables for height-for-age, weight-for-age, body mass index (BMI)-for-age, and weight-for-height (WFH) using Generalized Additive Models for Location Shape and Scale (GAMLSS). Velocity curves were generated using SuperImposition by Translation and Rotation (SITAR). Tsimane ≤5 years were compared World Health Organization (WHO) standards while those >5 years were compared to WHO school age references. All ages were compared to published references for Shuar forager-horticulturalists of the Ecuadorian Amazon. Results Tsimane growth differs from WHO values in height and weight, but is similar for BMI and WFH. Tsimane growth is characterized by slow height velocity in childhood and early adolescent peak height velocity at 11.3 and 13.2 years for girls and boys. Tsimane growth patterns are similar to Shuar, suggesting shared features of growth among indigenous South Americans. Conclusions International references for BMI-for-age and WFH are likely appropriate for Tsimane, but differences in height-for-age and weight-for-age suggest Tsimane specific references may be useful for these measures. PMID:28218400

Growth references for Tsimane forager-horticulturalists of the Bolivian Amazon.

PubMed

Blackwell, Aaron D; Urlacher, Samuel S; Beheim, Bret; von Rueden, Christopher; Jaeggi, Adrian; Stieglitz, Jonathan; Trumble, Benjamin C; Gurven, Michael; Kaplan, Hillard

2017-03-01

Growth standards and references currently used to assess population and individual health are derived primarily from urban populations, including few individuals from indigenous or subsistence groups. Given environmental and genetic differences, growth may vary in these populations. Thus, there is a need to assess whether international standards are appropriate for all populations, and to produce population specific references if growth differs. Here we present and assess growth references for the Tsimane, an indigenous population of Bolivian forager-horticulturalists. Mixed cross-sectional/longitudinal anthropometrics (9,614 individuals; 30,118 observations; ages 0-29 years) were used to generate centile curves and Lambda-Mu-Sigma (LMS) tables for height-for-age, weight-for-age, body mass index (BMI)-for-age, and weight-for-height (WFH) using Generalized Additive Models for Location Shape and Scale (GAMLSS). Velocity curves were generated using SuperImposition by Translation and Rotation (SITAR). Tsimane ≤5 years were compared to World Health Organization (WHO) standards while those >5 years were compared to WHO school age references. All ages were compared to published references for Shuar forager-horticulturalists of the Ecuadorian Amazon. Tsimane growth differs from WHO values in height and weight, but is similar for BMI and WFH. Tsimane growth is characterized by slow height velocity in childhood and early adolescent peak height velocity at 11.3 and 13.2 years for girls and boys. Tsimane growth patterns are similar to Shuar, suggesting shared features of growth among indigenous South Americans. International references for BMI-for-age and WFH are likely appropriate for Tsimane, but differences in height-for-age and weight-for-age suggest Tsimane specific references may be useful for these measures. © 2016 Wiley Periodicals, Inc.

Measurement errors when estimating the vertical jump height with flight time using photocell devices: the example of Optojump.

PubMed

Attia, A; Dhahbi, W; Chaouachi, A; Padulo, J; Wong, D P; Chamari, K

2017-03-01

Common methods to estimate vertical jump height (VJH) are based on the measurements of flight time (FT) or vertical reaction force. This study aimed to assess the measurement errors when estimating the VJH with flight time using photocell devices in comparison with the gold standard jump height measured by a force plate (FP). The second purpose was to determine the intrinsic reliability of the Optojump photoelectric cells in estimating VJH. For this aim, 20 subjects (age: 22.50±1.24 years) performed maximal vertical jumps in three modalities in randomized order: the squat jump (SJ), counter-movement jump (CMJ), and CMJ with arm swing (CMJarm). Each trial was simultaneously recorded by the FP and Optojump devices. High intra-class correlation coefficients (ICCs) for validity (0.98-0.99) and low limits of agreement (less than 1.4 cm) were found; even a systematic difference in jump height was consistently observed between FT and double integration of force methods (-31% to -27%; p<0.001) and a large effect size (Cohen's d >1.2). Intra-session reliability of Optojump was excellent, with ICCs ranging from 0.98 to 0.99, low coefficients of variation (3.98%), and low standard errors of measurement (0.8 cm). It was concluded that there was a high correlation between the two methods to estimate the vertical jump height, but the FT method cannot replace the gold standard, due to the large systematic bias. According to our results, the equations of each of the three jump modalities were presented in order to obtain a better estimation of the jump height.

Measurement errors when estimating the vertical jump height with flight time using photocell devices: the example of Optojump

PubMed Central

Attia, A; Chaouachi, A; Padulo, J; Wong, DP; Chamari, K

2016-01-01

Common methods to estimate vertical jump height (VJH) are based on the measurements of flight time (FT) or vertical reaction force. This study aimed to assess the measurement errors when estimating the VJH with flight time using photocell devices in comparison with the gold standard jump height measured by a force plate (FP). The second purpose was to determine the intrinsic reliability of the Optojump photoelectric cells in estimating VJH. For this aim, 20 subjects (age: 22.50±1.24 years) performed maximal vertical jumps in three modalities in randomized order: the squat jump (SJ), counter-movement jump (CMJ), and CMJ with arm swing (CMJarm). Each trial was simultaneously recorded by the FP and Optojump devices. High intra-class correlation coefficients (ICCs) for validity (0.98-0.99) and low limits of agreement (less than 1.4 cm) were found; even a systematic difference in jump height was consistently observed between FT and double integration of force methods (-31% to -27%; p<0.001) and a large effect size (Cohen’s d>1.2). Intra-session reliability of Optojump was excellent, with ICCs ranging from 0.98 to 0.99, low coefficients of variation (3.98%), and low standard errors of measurement (0.8 cm). It was concluded that there was a high correlation between the two methods to estimate the vertical jump height, but the FT method cannot replace the gold standard, due to the large systematic bias. According to our results, the equations of each of the three jump modalities were presented in order to obtain a better estimation of the jump height. PMID:28416900

Effect of Scintillometer Height on Structure Parameter of the Refractive Index of Air Measurements

NASA Astrophysics Data System (ADS)

Gowda, P. H.; Howell, T. A.; Hartogensis, O.; Basu, S.; Scanlon, B. R.

2009-12-01

Scintillometers measure amount of scintillations by emitting a beam of light over a horizontal path and expresses as the atmospheric turbulence structure parameter as the refractive index of air (Cn2). Cn2 represents the turbulent strength of the atmosphere and describes the ability of the atmosphere to transport heat and humidity. The main objective of this study was to evaluate the effect of scintillometer height on Cn2 measurements and on the estimation of latent heat fluxes. The study was conducted during the 2009 summer growing season in the USDA-ARS Conservation and Production Research Laboratory (CPRL) at Bushland [350 11' N, 1020 06' W; 1,170 m elevation MSL], Texas. Field experiment consisted of two steps: (1) cross-calibration of scintillometers and (2) measurement of Cn2 at different heights. In the first step, three large aperture scintillometers (LAS) were deployed across two large lysimeter fields with bare soil surfaces. During the 3-week cross-calibration period, all three scintillometers were installed at a 2-m height with a path length of 420 m. Cn2 was monitored at a 1-min interval and averaged for 15-min periods. Cn2 measurements were synchronized with weather station and weighing lysimeter measurements. After the cross-calibration period, scintillometers were installed at 2-, 2.5- and 3-m heights, and Cn2 measurements were continued for another 3-week period. In addition to the Cn2 measurements, net radiation (Rn) and soil heat fluxes (G) were measured in both lysimeter fields. Cn2 values were corrected for inner scale dependence before cross calibration and estimation of sensible heat fluxes. Measurements of wind speed, air temperature, and relative humidity were used with Cn2 data to derive sensible heat fluxes. Latent heat fluxes were estimated as a residual from the energy balance and compared with lysimeter data. Results of cross calibration and effects of scintillometer height on the estimation of latent heat fluxes were reported and discussed.

Atomic force microscopy study on crystal growth of Cu 2+-doped L-arginine phosphate monohydrate crystals

NASA Astrophysics Data System (ADS)

Geng, Y. L.; Xu, D.; Wang, Y. L.; Du, W.; Liu, H. Y.; Zhang, G. H.; Wang, X. Q.; Sun, D. L.

2005-01-01

Sub-steps and defects of the {1 0 0} planes of Cu 2+-doped L-arginine phosphate monohydrate (LAP) crystals are observed by atomic force microscopy. Formation of sub-steps is not due to the stacking faults but a result of single LAP: Cu 2+ molecule acting as growth unit. Two-dimensional (2D) nuclei with the same height as sub-steps occur on the step-edges. Impurities of Cu 2+ ions cause steps bunch and macrosteps formation. Liquid inclusions in the form of long channels form when the macrosteps lose their stability. Numerous small 3D growth hillocks are found in the channels. The extra stress induced by the 3D islands can result in dislocations and steps mismatches.

Reference values for airway resistance in newborns, infants and preschoolers from a Latin American population.

PubMed

Gochicoa, Laura G; Thomé-Ortiz, Laura P; Furuya, María E Y; Canto, Raquel; Ruiz-García, Martha E; Zúñiga-Vázquez, Guillermo; Martínez-Ramírez, Filiberto; Vargas, Mario H

2012-05-01

Several studies have determined reference values for airway resistance measured by the interrupter technique (Rint) in paediatric populations, but only one has been done on Latin American children, and no studies have been performed on Mexican children. Moreover, these previous studies mostly included children aged 3 years and older; therefore, information regarding Rint reference values for newborns and infants is scarce. Rint measurements were performed on preschool children attending eight kindergartens (Group 1) and also on sedated newborns, infants and preschool children admitted to a tertiary-level paediatric hospital due to non-cardiopulmonary disorders (Group 2). In both groups, Rint values were inversely associated with age, weight and height, but the strongest association was with height. The linear regression equation for Group 1 (n = 209, height 86-129 cm) was Rint = 2.153 - 0.012 × height (cm) (standard deviation of residuals 0.181 kPa/L/s). The linear regression equation for Group 2 (n = 55, height 52-113 cm) was Rint = 4.575 - 0.035 × height (cm) (standard deviation of residuals 0.567 kPa/L/s). Girls tended to have slightly higher Rint values than boys, a difference that diminished with increasing height. In this study, Rint reference values applicable to Mexican children were determined, and these values are probably also applicable to other paediatric populations with similar Spanish-Amerindian ancestries. There was an inverse relationship between Rint and height, with relatively large between-subject variability. © 2012 The Authors. Respirology © 2012 Asian Pacific Society of Respirology.

Required coefficient of friction during turning at self-selected slow, normal, and fast walking speeds.

PubMed

Fino, Peter; Lockhart, Thurmon E

2014-04-11

This study investigated the relationship of required coefficient of friction to gait speed, obstacle height, and turning strategy as participants walked around obstacles of various heights. Ten healthy, young adults performed 90° turns around corner pylons of four different heights at their self selected normal, slow, and fast walking speeds using both step and spin turning strategies. Kinetic data was captured using force plates. Results showed peak required coefficient of friction (RCOF) at push off increased with increased speed (slow μ=0.38, normal μ=0.45, and fast μ=0.54). Obstacle height had no effect on RCOF values. The average peak RCOF for fast turning exceeded the OSHA safety guideline for static COF of μ>0.50, suggesting further research is needed into the minimum static COF to prevent slips and falls, especially around corners. Copyright © 2014 Elsevier Ltd. All rights reserved.

Correlation Equation of Fault Size, Moment Magnitude, and Height of Tsunami Case Study: Historical Tsunami Database in Sulawesi

NASA Astrophysics Data System (ADS)

Julius, Musa, Admiral; Pribadi, Sugeng; Muzli, Muzli

2018-03-01

Sulawesi, one of the biggest island in Indonesia, located on the convergence of two macro plate that is Eurasia and Pacific. NOAA and Novosibirsk Tsunami Laboratory show more than 20 tsunami data recorded in Sulawesi since 1820. Based on this data, determination of correlation between tsunami and earthquake parameter need to be done to proved all event in the past. Complete data of magnitudes, fault sizes and tsunami heights on this study sourced from NOAA and Novosibirsk Tsunami database, completed with Pacific Tsunami Warning Center (PTWC) catalog. This study aims to find correlation between moment magnitude, fault size and tsunami height by simple regression. The step of this research are data collecting, processing, and regression analysis. Result shows moment magnitude, fault size and tsunami heights strongly correlated. This analysis is enough to proved the accuracy of historical tsunami database in Sulawesi on NOAA, Novosibirsk Tsunami Laboratory and PTWC.

International standards for symphysis-fundal height based on serial measurements from the Fetal Growth Longitudinal Study of the INTERGROWTH-21st Project: prospective cohort study in eight countries.

PubMed

Papageorghiou, Aris T; Ohuma, Eric O; Gravett, Michael G; Hirst, Jane; da Silveira, Mariangela F; Lambert, Ann; Carvalho, Maria; Jaffer, Yasmin A; Altman, Douglas G; Noble, Julia A; Bertino, Enrico; Purwar, Manorama; Pang, Ruyan; Cheikh Ismail, Leila; Victora, Cesar; Bhutta, Zulfiqar A; Kennedy, Stephen H; Villar, José

2016-11-07

 To create international symphysis-fundal height standards derived from pregnancies of healthy women with good maternal and perinatal outcomes.  Prospective longitudinal observational study.  Eight geographically diverse urban regions in Brazil, China, India, Italy, Kenya, Oman, United Kingdom, and United States.  Healthy, well nourished pregnant women enrolled into the Fetal Growth Longitudinal Study component of the INTERGROWTH-21 st Project at 9-14 weeks' gestation, and followed up until birth.  Symphysis-fundal height was measured every five weeks from 14 weeks' gestation until birth using standardised methods and dedicated research staff who were blinded to the symphysis-fundal height measurements by turning the tape measure so that numbers were not visible during examination. The best fitting curve was selected using second degree fractional polynomials and further modelled in a multilevel framework to account for the longitudinal design of the study.  Of 13 108 women screened in the first trimester, 4607 (35.1%) met the study entry criteria. Of the eligible women, 4321 (93.8%) had pregnancies without major complications and delivered live singletons without congenital malformations. The median number of symphysis-fundal height measurements was 5.0 (range 1-7); 3976 (92.0%) women had four or more measurements. Symphysis-fundal height measurements increased almost linearly with gestational age; data were used to determine fitted 3rd, 50th, and 97th centile curves, which showed excellent agreement with observed values.  This study presents international standards to measure symphysis-fundal height as a first level screening tool for fetal growth disturbances. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A novel neutron energy spectrum unfolding code using particle swarm optimization

NASA Astrophysics Data System (ADS)

Shahabinejad, H.; Sohrabpour, M.

2017-07-01

A novel neutron Spectrum Deconvolution using Particle Swarm Optimization (SDPSO) code has been developed to unfold the neutron spectrum from a pulse height distribution and a response matrix. The Particle Swarm Optimization (PSO) imitates the bird flocks social behavior to solve complex optimization problems. The results of the SDPSO code have been compared with those of the standard spectra and recently published Two-steps Genetic Algorithm Spectrum Unfolding (TGASU) code. The TGASU code have been previously compared with the other codes such as MAXED, GRAVEL, FERDOR and GAMCD and shown to be more accurate than the previous codes. The results of the SDPSO code have been demonstrated to match well with those of the TGASU code for both under determined and over-determined problems. In addition the SDPSO has been shown to be nearly two times faster than the TGASU code.

Surface topography acquisition method for double-sided near-right-angle structured surfaces based on dual-probe wavelength scanning interferometry.

PubMed

Zhang, Tao; Gao, Feng; Jiang, Xiangqian

2017-10-02

This paper proposes an approach to measure double-sided near-right-angle structured surfaces based on dual-probe wavelength scanning interferometry (DPWSI). The principle and mathematical model is discussed and the measurement system is calibrated with a combination of standard step-height samples for both probes vertical calibrations and a specially designed calibration artefact for building up the space coordinate relationship of the dual-probe measurement system. The topography of the specially designed artefact is acquired by combining the measurement results with white light scanning interferometer (WLSI) and scanning electron microscope (SEM) for reference. The relative location of the two probes is then determined with 3D registration algorithm. Experimental validation of the approach is provided and the results show that the method is able to measure double-sided near-right-angle structured surfaces with nanometer vertical resolution and micrometer lateral resolution.

Unprecedented covalently attached ATRP initiator onto OH-functionalized mica surfaces.

PubMed

Lego, Béatrice; Skene, W G; Giasson, Suzanne

2008-01-15

Mica substrates were activated by a plasma method leading to OH-functionalized surfaces to which an atom transfer radical polymerization (ATRP) radical initiator was covalently bound using standard siloxane protocols. The unprecedented covalently immobilized initiator underwent radical polymerization with tert-butyl acrylate, yielding for the first time end-grafted polymer brushes that are covalently linked to mica. The initiator grafting on the mica substrate was confirmed by time-of-flight secondary ion mass spectrometry (TOF-SIMS), while the change in the water contact angle of the OH-activated mica surface was used to follow the change in surface coverage of the initiator on the surface. The polymer brush and initiator film thicknesses relative to the virgin mica were confirmed by atomic force microscopy (AFM). This was done by comparing the atomic step-height difference between a protected area of freshly cleaved mica and a zone exposed to plasma activation, initiator immobilization, and then ATRP.

Growth assessment in diagnosis of Fetal Growth Restriction. Review.

PubMed

Albu, A R; Horhoianu, I A; Dumitrascu, M C; Horhoianu, V

2014-06-15

The assessment of fetal growth represents a fundamental step towards the identification of the true growth restricted fetus that is associated to important perinatal morbidity and mortality. The possible ways of detecting abnormal fetal growth are taken into consideration in this review and their strong and weak points are discussed. An important debate still remains about how to discriminate between the physiologically small fetus that does not require special surveillance and the truly growth restricted fetus who is predisposed to perinatal complications, even if its parameters are above the cut-off limits established. In this article, we present the clinical tools of fetal growth assessment: Symphyseal-Fundal Height (SFH) measurement, the fetal ultrasound parameters widely taken into consideration when discussing fetal growth: Abdominal Circumference (AC) and Estimated Fetal Weight (EFW); several types of growth charts and their characteristics: populational growth charts, standard growth charts, individualized growth charts, customized growth charts and growth trajectories.

Off-axis silicon carbide substrates

DOEpatents

Edgar, James; Dudley, Michael; Kuball, Martin; Zhang, Yi; Wang, Guan; Chen, Hui; Zhang, Yu

2014-09-02

A method of epitaxial growth of a material on a crystalline substrate includes selecting a substrate having a crystal plane that includes a plurality of terraces with step risers that join adjacent terraces. Each terrace of the plurality or terraces presents a lattice constant that substantially matches a lattice constant of the material, and each step riser presents a step height and offset that is consistent with portions of the material nucleating on adjacent terraces being in substantial crystalline match at the step riser. The method also includes preparing a substrate by exposing the crystal plane; and epitaxially growing the material on the substrate such that the portions of the material nucleating on adjacent terraces merge into a single crystal lattice without defects at the step risers.

Reduced sensitivity for visual textures affects judgments of shape-from-shading and step-climbing behaviour in older adults.

PubMed

Schofield, Andrew J; Curzon-Jones, Benjamin; Hollands, Mark A

2017-02-01

Falls on stairs are a major hazard for older adults. Visual decline in normal ageing can affect step-climbing ability, altering gait and reducing toe clearance. Here we show that a loss of fine-grained visual information associated with age can affect the perception of surface undulations in patterned surfaces. We go on to show that such cues affect the limb trajectories of young adults, but due to their lack of sensitivity, not that of older adults. Interestingly neither the perceived height of a step nor conscious awareness is altered by our visual manipulation, but stepping behaviour is, suggesting that the influence of shape perception on stepping behaviour is via the unconscious, action-centred, dorsal visual pathway.

Cardiovascular responses to aerobic step dance sessions with and without appendicular overload.

PubMed

La Torre, A; Impellizzeri, F M; Rampinini, E; Casanova, F; Alberti, G; Marcora, S M

2005-09-01

Several studies showed that exercise intensity during aerobic step dance can be modified varying stepping rate, bench height and manipulating body mass using hand held or adding loads to the torso. The aim of this study was to determine the cardiovascular responses during aerobic step dance using an overload strategy not yet investigated: appendicular overload. Ten healthy and moderately trained women (mean+/-SD: age 27+/-3.4 years, height 167.8+/-4.6 cm, body mass 55.7+/-4.7 kg, body mass index 19.8+/-1.6, VO2max44.4+/-6.1 mLxkg-1xmin-1) performed an incremental treadmill test to determine VO2peak, the VO2-heart rate (HR) and rating of perceived exertion (RPE)-HR relationships. Within 1 week from the laboratory test, the subjects performed two identical aerobic step dance routines: one using a track suit with loads placed in pockets close to the legs and arms and another without overload. The appendicular overload (10% of body mass) significantly increased the exercise intensity from 84.5% to 89.8% of HRmax corresponding to 68.9% and 78.3% of VO2peak, respectively (P<0.01). Similarly, RPE increased from 12.1 to 15.7 (P<0.001). The estimated VO2 and the caloric expenditure rose from 30.3 to 34.7 mLxkg-1xmin-1 and from 251 to 288 kcal, respectively. This study shows that the use of appendicular overload significantly increases the energy cost of aerobic step session similarly to other overload strategies already reported in the literature.

Soft tissue outcome after mandibular advancement--an anthropometric evaluation of 171 consecutive patients.

PubMed

Raschke, Gregor F; Rieger, Ulrich M; Bader, Rolf-Dieter; Guentsch, Arndt; Schaefer, Oliver; Schultze-Mosgau, Stefan

2013-06-01

There is an ongoing discussion in the literature about preoperative planning and postoperative evaluation of orthognathic surgery and its impact on facial appearance and aesthetics. We present an anthropometric and cephalometric evaluation of orthognathic surgery results based on reference anthropometric data. In 171 Class II patients, mandibular advancement by bilateral sagittal split osteotomy was performed. Preoperative as well as 3 and 9 months postoperative standardized frontal view and profile photographs and lateral cephalograms were evaluated in a standardized manner by use of 21 anthropometric indices. In cephalograms, SNA and SNB angle as well as Wits appraisal were investigated. Results of anthropometric and cephalometric measurements were correlated. Lower vermilion contour, vermilion and cutaneous total lower lip height, nose-lower face height, nose-face height, upper face-face height, upper lip- and chin-mandible height index showed significant pre- to postoperative changes as well as SNB angle and Wits appraisal. Furthermore, medial-lateral cutaneous upper lip height, vermilion and cutaneous total lower lip height and philtrum-mouth width index presented significant correlations to cephalometric measurements. The investigated anthropometric indices and cephalometric measurements presented reproducible results related to surgery. The correlation of cephalometric to anthropometric measurements has been proven useful for preoperative planning and postoperative evaluation of orthognathic surgery patients. The presented anthropometric measurements and their observed correlation to cephalometric measurements could lead to a better prediction and optimized planning of the soft tissue result in orthognathic surgery patients and thereby improve the aesthetic outcome.

Impact of an 8-Month Trial Using Height-Adjustable Desks on Children’s Classroom Sitting Patterns and Markers of Cardio-Metabolic and Musculoskeletal Health

PubMed Central

Contardo Ayala, Ana María; Salmon, Jo; Timperio, Anna; Sudholz, Bronwyn; Ridgers, Nicola D.; Sethi, Parneet; Dunstan, David W.

2016-01-01

During school hours, children can sit for prolonged and unbroken periods of time. This study investigated the impact of an 8-month classroom-based intervention focusing on reducing and breaking-up sitting time on children’s cardio-metabolic risk factors (i.e., body mass index, waist circumference, blood pressure) and perceptions of musculoskeletal discomfort. Two Year-6 classes (24 students per class) in one primary school were assigned to either an intervention or control classroom. The intervention classroom was equipped with height-adjustable desks and the teacher was instructed in the delivery of pedagogical strategies to reduce and break-up sitting in class. The control classroom followed standard practice using traditional furniture. At baseline, and after 8-months, time spent sitting, standing, stepping, and sitting-bouts (occasions of continuous sitting) as well as the frequency of sit-to-stand transitions were obtained from activPAL inclinometers and the time spent in light-intensity physical activity was obtained from ActiGraph accelerometers. Demographics and musculoskeletal characteristics were obtained from a self-report survey. Hierarchical linear mixed models found that during class-time, children’s overall time spent sitting in long bouts (>10 min) were lower and the number of sit-to-stand transitions were higher in the intervention group compared to the control group, while no changes were observed for musculoskeletal pain/discomfort. No significant intervention effects were found for the anthropometrics measures and blood pressure. Height-adjustable desks and pedagogical strategies to reduce/break-up sitting can positively modify classroom sitting patterns in children. Longer interventions, larger and varied sample size may be needed to show health impacts; however, these desks did not increase musculoskeletal pain/discomfort. PMID:27973414

Relative effects of posture and activity on human height estimation from surveillance footage.

PubMed

Ramstrand, Nerrolyn; Ramstrand, Simon; Brolund, Per; Norell, Kristin; Bergström, Peter

2011-10-10

Height estimations based on security camera footage are often requested by law enforcement authorities. While valid and reliable techniques have been established to determine vertical distances from video frames, there is a discrepancy between a person's true static height and their height as measured when assuming different postures or when in motion (e.g., walking). The aim of the research presented in this report was to accurately record the height of subjects as they performed a variety of activities typically observed in security camera footage and compare results to height recorded using a standard height measuring device. Forty-six able bodied adults participated in this study and were recorded using a 3D motion analysis system while performing eight different tasks. Height measurements captured using the 3D motion analysis system were compared to static height measurements in order to determine relative differences. It is anticipated that results presented in this report can be used by forensic image analysis experts as a basis for correcting height estimations of people captured on surveillance footage. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Adult height, nutrition, and population health

PubMed Central

Perkins, Jessica M.; Subramanian, S.V.; Davey Smith, George

2016-01-01

In this review, the potential causes and consequences of adult height, a measure of cumulative net nutrition, in modern populations are summarized. The mechanisms linking adult height and health are examined, with a focus on the role of potential confounders. Evidence across studies indicates that short adult height (reflecting growth retardation) in low- and middle-income countries is driven by environmental conditions, especially net nutrition during early years. Some of the associations of height with health and social outcomes potentially reflect the association between these environmental factors and such outcomes. These conditions are manifested in the substantial differences in adult height that exist between and within countries and over time. This review suggests that adult height is a useful marker of variation in cumulative net nutrition, biological deprivation, and standard of living between and within populations and should be routinely measured. Linkages between adult height and health, within and across generations, suggest that adult height may be a potential tool for monitoring health conditions and that programs focused on offspring outcomes may consider maternal height as a potentially important influence. PMID:26928678

Dorothy I. Height and Whitney M. Young, Jr. Social Work Reinvestment Act

THOMAS, 111th Congress

Rep. Towns, Edolphus [D-NY-10

2009-02-03

House - 03/23/2009 Referred to the Subcommittee on Higher Education, Lifelong Learning, and Competitiveness. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Growth morphology of flux-synthesized La4Ti3O12 particles

NASA Astrophysics Data System (ADS)

Hori, Shigeo; Orum, Aslihan; Takatori, Kazumasa; Ikeda, Tomiko; Yoshimura, Masamichi; Tani, Toshihiko

2017-06-01

Anisometric-shaped particles were required for preparation of oriented ceramics by the reactive-templated grain growth method. Hexagonal plate-like particles of La4Ti3O12, (111)-type layered perovskite, were prepared by a molten salt synthesis (MSS), and the relationship between the morphology and crystal structure of the particles was analysed. La4Ti3O12 phase was obtained in KCl and NaCl fluxes whereas not obtained in LiCl. The developed plane of the plate-like particles was determined to be the (00l) plane and the side planes of the particle were found to be parallel the {h0l} planes. Surface steps with a height of approx. 0.9 nm were measured on the developed plane. The step height corresponds to the distance between two adjacent interlayers, which indicates the lowest surface energy of the planes along the interlayers.

Design improvement of a pump wear ring labyrinth seal

NASA Technical Reports Server (NTRS)

Rhode, David L.; Morrison, G. L.; Ko, S. H.; Waughtal, S. P.

1987-01-01

The investigation was successful in obtaining two improved designs for the impeller wear ring seal of the liquid hydrogen turbopump of interest. A finite difference computer code was extensively used in a parametric computational study in determining a cavity configuration with high flow resistance due to turbulence dissipation. These two designs, along with that currently used, were fabricated and tested. The improved designs were denoted Type O and Type S. The measurements showed that Type O and Type S given 67 and 30 percent reduction in leakage over the current design, respectively. It was found that the number of cavities, the step height and the presence of a small stator groove are quite important design features. Also, the tooth thickness is of some significance. Finally, the tooth height and an additional large cavity cut out from the stator (upstream of the step) are of negligible importance.

Experimental study of flow reattachment in a single-sided sudden expansion

NASA Technical Reports Server (NTRS)

Westphal, R. V.; Johnston, J. P.; Eaton, J. K.

1984-01-01

The reattachment of a fully turbulent, two dimensional, separated shear layer downstream of a single-sided sudden expansion in a planar duct flow was examined experimentally. The importance of changing the structure of the separated shear layer on the reattachment process itself was examined. For all cases, the Reynolds number based on step height was greater than 20,000, the expansion ratio was 5/3, and the inlet boundary layer was less than one-half step height in thickness. A crucially important phase was the development of a pulsed wall probe for measurement of skin friction in the reattachment region, thus providing an unambiguous definition of the reattachment length. Quantitative features of reattachment - including streamwise development of the mean and fluctuating velocity field, pressure rise, and skin friction - were found to be similar for all cases studied when scaled by the reattachment length. A definition of the reattachment zone is proposed.

CORRELATIONS BETWEEN INTELLIGENCE, HEAD CIRCUMFERENCE AND HEIGHT: EVIDENCE FROM TWO SAMPLES IN SAUDI ARABIA.

PubMed

Bakhiet, Salaheldin Farah Attallah; Essa, Yossry Ahmed Sayed; Dwieb, Amira Mahmood Mohsen; Elsayed, Abdelkader Mohamed Abdelkader; Sulman, Afra Sulman Mohammed; Cheng, Helen; Lynn, Richard

2017-03-01

This study was based on two independent studies which in total consisted of 1812 school pupils aged 6-12 years in Saudi Arabia. Study I consisted of 1591 school pupils (609 boys and 982 girls) attending state schools, and Study II consisted of 211 boys with learning disabilities. Intelligence (measured using the Standard Progressive Matrices Plus for Study I and the Standard Progressive Matrices for Study II), head size and height were measured for the two samples. The results showed that intelligence was statistically significantly correlated with head circumference (r=0.350, p<0.001 for Study I and r=0.168, p<0.05 for Study II) and height (r=0.271, p<0.001 for Study I and r=0.178, p<0.05 for Study II).

36 CFR 910.61 - Height of development.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Height of development. 910.61 Section 910.61 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA AVENUE...

36 CFR 910.54 - Build-to height.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Build-to height. 910.54 Section 910.54 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA AVENUE...

36 CFR 910.54 - Build-to height.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Build-to height. 910.54 Section 910.54 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA AVENUE...

36 CFR 910.61 - Height of development.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Height of development. 910.61 Section 910.61 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA AVENUE...

Photo-anthropometric study on face among Garo adult females of Bangladesh.

PubMed

Akhter, Z; Banu, M L A; Alam, M M; Hossain, S; Nazneen, M

2013-08-01

Facial anthropometry has well-known implications in health-related fields. Measurement of human face is used in identification of person in Forensic medicine, Plastic surgery, Orthodontics, Archeology, Hair-style design and examination of the differences between races and ethnicities. Facial anthropometry provides an indication of the variations in facial shape in a specified population. Bangladesh harbours many cultures and people of different races because of the colonial rules of the past regimes. Standards based on ethnic or racial data are desirable because these standards reflect the potentially different patterns of craniofacial growth resulting from racial, ethnic and sexual differences. In the above context, the present study was attempted to establish ethnic specific anthropometric data for the Christian Garo adult females of Bangladesh. The study was an observational, cross-sectional and primarily descriptive in nature with some analytical components and it was carried out with a total number of 100 Christian Garo adult females aged between 25-45 years. Three vertical facial dimensions such as facial height from 'trichion' to 'gnathion', nasal length and total vermilion height were measured by photographic method. Though these measurements were taken by photographic method but they were converted into actual size using one of the physically measured variables between two angles of the mouth (chilion to chilion). The data were then statistically analyzed by computation to find out its normatic value. The study also observed the possible 'correlation' between the facial height from 'trichion' to 'gnathion' with nasal length and total vermilion height. Multiplication factors were estimated for estimating facial height from nasal length and total vermilion height. Comparison were made between 'estimated' values with the 'measured' values by using't' test. The mean (+/- SD) of nasal length and total vermilion height were 4.53 +/- 0.36 cm and 1.63 +/- 0.23 cm respectively and the mean (+/- SD) of facial height from 'trichion' to 'gnathion' was 16.88 +/- 1.11 cm. Nasal length and total vermilion height showed also a significant positive correlation with facial height from 'trichion' to 'gnathion'. No significant difference was found between the 'measured' and 'estimated' facial height from 'trichion' to 'gnathion' for nasal length and total vermilion height.

HYDROCORTISONE THERAPY AND GROWTH TRAJECTORY IN CHILDREN WITH CLASSICAL CONGENITAL ADRENAL HYPERPLASIA.

PubMed

Bizzarri, Carla; Improda, Nicola; Maggioli, Chiara; Capalbo, Donatella; Roma, Silvia; Porzio, Ottavia; Salerno, Mariacarolina; Cappa, Marco

2017-05-01

Poor linear growth is one of the main concerns in children with congenital adrenal hyperplasia (CAH). We aimed to analyze factors affecting growth trajectory in children with classical CAH. Clinical records of children followed from infancy up to the end of growth at two Italian tertiary referral hospitals were reviewed. Fifty-seven patients (31 males), treated with hydrocortisone and fludrocortisone only, were included. Clinical observations were divided into three groups: 0 to 2 years, 172 observations; from 2 years to puberty onset, 813 observations; after puberty onset, 527 observations. Height velocity, pubertal growth spurt, and final height were evaluated as outcomes. Final height standard deviation score (SDS) was lower than target height SDS (-0.74 ± 1.1 versus -0.31 ± 1.01; P<.001). Target-adjusted final height SDS was -0.44 ± 1.8 in males and -0.13 ± 1.1 in females (P = .001). Total pubertal growth was 21.9 ± 7.3 cm in males and 19.2 ± 8.2 cm in females (P = .19). Hydrocortisone dose increased and height-velocity SDS decreased during puberty. At multivariable analysis, height-velocity SDS was adversely affected by hydrocortisone dose (P = .038) and directly related to adrenocorticotropic hormone (ACTH) levels (P = .023). Target-adjusted final-height SDS was adversely affected by hydrocortisone dose (P<.001) and positively related to mineralocorticoid therapy (P = .001) and ACTH levels (P = .02). Total pubertal growth (cm) was positively related to ACTH levels (P = .01). Height outcome of CAH patients is now better than previously reported. During puberty, the lowest effective dose of hydrocortisone should be used to optimize pubertal growth spurt and final height. 17-OHP = 17-alpha-hydroxyprogesterone ACTH = adrenocorticotropic hormone BMI = body mass index CAH = congenital adrenal hyperplasia GH = growth hormone HPA = hypothalamus-pituitary-adrenal PRA = plasma renin activity SDS = standard deviation score SV = simple virilizing SW = salt-wasting.

Growth curves and the international standard: How children's growth reflects challenging conditions in rural Timor-Leste.

PubMed

Spencer, Phoebe R; Sanders, Katherine A; Judge, Debra S

2018-02-01

Population-specific growth references are important in understanding local growth variation, especially in developing countries where child growth is poor and the need for effective health interventions is high. In this article, we use mixed longitudinal data to calculate the first growth curves for rural East Timorese children to identify where, during development, deviation from the international standards occurs. Over an eight-year period, 1,245 children from two ecologically distinct rural areas of Timor-Leste were measured a total of 4,904 times. We compared growth to the World Health Organization (WHO) standards using z-scores, and modeled height and weight velocity using the SuperImposition by Translation And Rotation (SITAR) method. Using the Generalized Additive Model for Location, Scale and Shape (GAMLSS) method, we created the first growth curves for rural Timorese children for height, weight and body mass index (BMI). Relative to the WHO standards, children show early-life growth faltering, and stunting throughout childhood and adolescence. The median height and weight for this population tracks below the WHO fifth centile. Males have poorer growth than females in both z-BMI (p = .001) and z-height-for-age (p = .018) and, unlike females, continue to grow into adulthood. This is the most comprehensive investigation to date of rural Timorese children's growth, and the growth curves created may potentially be used to identify future secular trends in growth as the country develops. We show significant deviation from the international standard that becomes most pronounced at adolescence, similar to the growth of other Asian populations. Males and females show different growth responses to challenging conditions in this population. © 2017 Wiley Periodicals, Inc.

Comparison of morphology of active cyclic steps created by turbidity currents on Squamish Delta, British Columbia, Canada with flume experiments

NASA Astrophysics Data System (ADS)

Yokokawa, Miwa; Yamamoto, Shinya; Higuchi, Hiroyuki; Hughes Clarke, John E.; Izumi, Norihiro

2015-04-01

Upper-flow-regime bedforms, such as cyclic steps and antidunes, have been reported to be formed by turbidity currents. Their formative conditions are, however, not fully understood because of the difficulty of field surveys in the deep sea. Field observations of turbidity currents and seabed topography on the Squamish delta in Howe Sound, British Columbia, Canada have been undertaken which found bedwaves actively migrating in the upstream direction in channels formed on the prodelta slope. Their topography and behavior suggest that they are cyclic steps formed by turbidity currents. Because Squamish delta is as shallow as around 150 m, and easy to access compared with general submarine canyons, it is thought to be one of the best places for studying characteristics of cyclic steps formed by turbidity currents through field observations. In this study, we have analyzed configurations of cyclic steps with the use of data obtained in the field observation of 2011, and compare them with the data from the flume experiments. On the prodelta slope, three major active channels are clearly developed. In addition to the sonar survey, a 600 kHz ADCP was installed in 150m of water just seaward of the termination of the North Channel. In addition, 1200kHz ADCP and 500kHz M3s are suspended from the research vessel in 60 m of water and 300 m distance from the delta edge. We selected images showing large daily differences. The steps move vigorously at the upper 600m parts of the prodelta slope, so that we measured the steps in this area. From the profiles perpendicular to the bedwave crest lines through the center of channels, wavelength and wave height for each step, mean slope were measured on the software for quantitative image analyses manually. Wave steepness for each step was calculated using the wavelength and wave height measured as above. The mean slope ranges from 6.8° ~ 2.7° (more proximal, steeper), mean wavelength and wave heights of steps range from 24.5 to 87.6m and from 2.4 to 5.4m respectively. We compare the shape of steps with the upper-flow-regime bedforms, such as antidunes and cyclic steps, obtained from the open channel experiments. Wave steepness of the steps in Squamish ranges from 0.035 to 0.157, which is relatively high and close in value to those of cyclic steps and downstream-migrating-antidunes (DMA) in the open channel experiments. The non-dimensional wave number depends on the estimation of the thickness of the turbidity currents. Based on the optical backscatter profiles, the upper limit of sediment suspension is around 10m. However the maximum velocity is always located within the lower 5m, and higher density layer seems to locate within the lowermost 2 m. For the 10m flow thickness, the wave number is close in value to those of DMA. While for the 0.5m flow thickness, the wave number is close in value to those of cyclic steps. We will discuss about the effect of "density currents" and/or "surge" on the morphology of those steps.

Height and weight as a reflection of the nutritional situation of school-aged children working and living in the streets of Jakarta.

PubMed

Gross, R; Landfried, B; Herman, S

1996-08-01

The nutritional status of 89 school-aged children living and working on the streets of Jakarta, Indonesia was assessed. Seventy-nine percent of the children were children "on" the street who still had regular contact with their families, whereas only 21% of the children were "of" the street who had only remote or no contact with their families. The mother was more likely to be present in the home of the children on the street than in the home of the children of the street. The average earning of the children was between 2000 and 3000 rupiah/day (U.S.S1 = 2000 Indonesian Rupiah). The distribution of height-for-age relative to the NCHS reference standard indicated that 52% of the children were stunted (below the third centile of the standard). However the distribution of weight-for height was close to that of the reference population standard, and only 7% of the children were wasted (below the third centile of the standard). Comparison of the data from these street children weigh more and are taller than their socio-economic peers.

Estimating the vegetation canopy height using micro-pulse photon-counting LiDAR data.

PubMed

Nie, Sheng; Wang, Cheng; Xi, Xiaohuan; Luo, Shezhou; Li, Guoyuan; Tian, Jinyan; Wang, Hongtao

2018-05-14

The upcoming space-borne LiDAR satellite Ice, Cloud and land Elevation Satellite-2 (ICESat-2) is scheduled to launch in 2018. Different from the waveform LiDAR system onboard the ICESat, ICESat-2 will use a micro-pulse photon-counting LiDAR system. Thus new data processing algorithms are required to retrieve vegetation canopy height from photon-counting LiDAR data. The objective of this paper is to develop and validate an automated approach for better estimating vegetation canopy height. The new proposed method consists of three key steps: 1) filtering out the noise photons by an effective noise removal algorithm based on localized statistical analysis; 2) separating ground returns from canopy returns using an iterative photon classification algorithm, and then determining ground surface; 3) generating canopy-top surface and calculating vegetation canopy height based on canopy-top and ground surfaces. This automatic vegetation height estimation approach was tested to the simulated ICESat-2 data produced from Sigma Space LiDAR data and Multiple Altimeter Beam Experimental LiDAR (MABEL) data, and the retrieved vegetation canopy heights were validated by canopy height models (CHMs) derived from airborne discrete-return LiDAR data. Results indicated that the estimated vegetation canopy heights have a relatively strong correlation with the reference vegetation heights derived from airborne discrete-return LiDAR data (R 2 and RMSE values ranging from 0.639 to 0.810 and 4.08 m to 4.56 m respectively). This means our new proposed approach is appropriate for retrieving vegetation canopy height from micro-pulse photon-counting LiDAR data.

Tank Tests of Models of Flying Boat Hulls Having Longitudinal Steps

NASA Technical Reports Server (NTRS)

Allison, John M; Ward, Kenneth E

1936-01-01

Four models with longitudinal steps on the forebody were developed by modification of a model of a conventional hull and were tested in the National Advisory Committee for Aeronautics (NACA) tank. Models with longitudinal steps were found to have smaller resistance at high speed and greater resistance at low speed than the parent model that had the same afterbody but a conventional V-section forebody. The models with a single longitudinal step had better performance at hump speed and as low high-speed resistance except at very light loads. Spray strips at angles from 0 degrees to 45 degrees to the horizontal were fitted at the longitudinal steps and at the chine on one of the two step models having two longitudinal steps. The resistance and the height of the spray were less with each of the spray strips than without; the most favorable angle was found to lie between 15 degrees and 30 degrees.

Method of making self-calibrated displacement measurements

DOEpatents

Pedersen, Herbert N.

1977-01-01

A method for monitoring the displacement of an object having an acoustically reflective surface at least partially submerged in an acoustically conductive medium. The reflective surface is designed to have a stepped interface responsive to an incident acoustic pulse to provide separate discrete reflected pulses to a receiving transducer. The difference in the time of flight of the reflected acoustic signals corresponds to the known step height and the time of travel of the signals to the receiving transducer provides a measure of the displacement of the object. Accordingly, the reference step length enables simultaneous calibration of each displacement measurement.

Accessibility: Maximum Mobility and Function.

ERIC Educational Resources Information Center

Smyser, Michael

2003-01-01

Describes how to design school and university labs to comply with Americans with Disabilities Act (ADA) standards, focusing on counter height for students in wheelchairs; appropriate knee space and sink height in sink areas; ADA-compliant fume hoods; accessible laboratory doors and entryways; and safety concerns (e.g., emergency eyewash stations…

47 CFR 95.859 - Antennas.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Antennas. 95.859 Section 95.859... SERVICES 218-219 MHz Service Technical Standards § 95.859 Antennas. (a) The overall height from ground to topmost tip of the CTS antenna shall not exceed the height necessary to assure adequate service. Certain...

47 CFR 95.859 - Antennas.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Antennas. 95.859 Section 95.859... SERVICES 218-219 MHz Service Technical Standards § 95.859 Antennas. (a) The overall height from ground to topmost tip of the CTS antenna shall not exceed the height necessary to assure adequate service. Certain...

47 CFR 95.859 - Antennas.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Antennas. 95.859 Section 95.859... SERVICES 218-219 MHz Service Technical Standards § 95.859 Antennas. (a) The overall height from ground to topmost tip of the CTS antenna shall not exceed the height necessary to assure adequate service. Certain...

47 CFR 95.859 - Antennas.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Antennas. 95.859 Section 95.859... SERVICES 218-219 MHz Service Technical Standards § 95.859 Antennas. (a) The overall height from ground to topmost tip of the CTS antenna shall not exceed the height necessary to assure adequate service. Certain...

47 CFR 95.859 - Antennas.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Antennas. 95.859 Section 95.859... SERVICES 218-219 MHz Service Technical Standards § 95.859 Antennas. (a) The overall height from ground to topmost tip of the CTS antenna shall not exceed the height necessary to assure adequate service. Certain...

Wind adjustment factors for predicting fire behavior in three fuel types in Alaska.

Treesearch

Rodney A. Norum

1983-01-01

Factors for adjusting wind velocities from the 20-foot standard anemometer height down to an average wildfire midflame height (3.5 ft for the fuels studied) are given for exposed, partially sheltered, and sheltered fuels in Alaska. The values are suitable for predicting wildfire behavior.

Dorothy I. Height and Whitney M. Young, Jr. Social Work Reinvestment Act

THOMAS, 111th Congress

Sen. Mikulski, Barbara A. [D-MD

2009-03-24

Senate - 03/24/2009 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Dorothy I. Height and Whitney M. Young, Jr. Social Work Reinvestment Act

THOMAS, 112th Congress

Sen. Mikulski, Barbara A. [D-MD

2011-03-15

Senate - 03/15/2011 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Dorothy I. Height and Whitney M. Young, Jr. Social Work Reinvestment Act

THOMAS, 113th Congress

Sen. Mikulski, Barbara A. [D-MD

2013-05-21

Senate - 05/21/2013 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Comparison of nutritional status of rural and urban school students receiving midday meals in schools of Bengaluru, India: a cross sectional study.

PubMed

Shalini, C N; Murthy, N S; Shalini, S; Dinesh, R; Shivaraj, N S; Suryanarayana, S P

2014-01-01

The objective of the study was to assess the impact of the mid day meal program by assessing the nutritional status of school students aged 5-15 years receiving midday meals in rural schools and compare them with those in urban schools in Bengaluru, India. This cross sectional study involved a sample of 4378 students from government and aided schools. Weight and height were measured and compared with ''means'' and ''percentiles'' of expected standards as endorsed by the Indian Association of Pediatrics. Regression coefficients were also estimated to assess the rate of growth. In all age groups and in both sexes, the observed mean weight and height were below the expected standards. The study findings showed that 13.8% and 13.1% of the studied students were underweight and stunted, respectively (below the third percentile for weight and height for age). A higher proportion of rural students were below the third percentile for both weight and height compared with urban students (weight: 16.3% and 11.5%; height: 17.0% and 10.0%; P < 0.05 for both weight and height). Only 2.4% and 3.1% were above 97 th percentile for weight and height. The rate of growth of height for weight showed a declining trend with increasing age in all the groups. The authors believe that the magnitude of the burden of undernourished students as seen in this study would have been much greater in the absence of the midday meal program. Greater involvement of the private sector to assist the government would help augment nutrition in children and indirectly impact school performance, attendance and literacy.

Accuracy of Jump-Mat Systems for Measuring Jump Height.

PubMed

Pueo, Basilio; Lipinska, Patrycja; Jiménez-Olmedo, José M; Zmijewski, Piotr; Hopkins, Will G

2017-08-01

Vertical-jump tests are commonly used to evaluate lower-limb power of athletes and nonathletes. Several types of equipment are available for this purpose. To compare the error of measurement of 2 jump-mat systems (Chronojump-Boscosystem and Globus Ergo Tester) with that of a motion-capture system as a criterion and to determine the modifying effect of foot length on jump height. Thirty-one young adult men alternated 4 countermovement jumps with 4 squat jumps. Mean jump height and standard deviations representing technical error of measurement arising from each device and variability arising from the subjects themselves were estimated with a novel mixed model and evaluated via standardization and magnitude-based inference. The jump-mat systems produced nearly identical measures of jump height (differences in means and in technical errors of measurement ≤1 mm). Countermovement and squat-jump height were both 13.6 cm higher with motion capture (90% confidence limits ±0.3 cm), but this very large difference was reduced to small unclear differences when adjusted to a foot length of zero. Variability in countermovement and squat-jump height arising from the subjects was small (1.1 and 1.5 cm, respectively, 90% confidence limits ±0.3 cm); technical error of motion capture was similar in magnitude (1.7 and 1.6 cm, ±0.3 and ±0.4 cm), and that of the jump mats was similar or smaller (1.2 and 0.3 cm, ±0.5 and ±0.9 cm). The jump-mat systems provide trustworthy measurements for monitoring changes in jump height. Foot length can explain the substantially higher jump height observed with motion capture.

Anthropometric measurements in the diagnosis of pelvic size: an analysis of maternal height and shoe size and computed tomography pelvimetric data.

PubMed

Awonuga, Awoniyi O; Merhi, Zaher; Awonuga, Modupe T; Samuels, Terri-Ann; Waller, Jennifer; Pring, David

2007-11-01

To determine whether measurements of maternal height and shoe size are predictors of pelvic size, using erect lateral computerized tomography (CT) pelvimetry as gold standard. Three hundred and fifty three obstetric patients out of a sequential population of 6112 (5.8%) had CT pelvimetry performed between January 1990 and December 1991 at the Department of Obstetrics and Gynecology, York District Hospital, United Kingdom. Multivariable logistic regression models were built using maternal height (n = 322), shoe size (314) and weight at last clinic visit (n = 318). The reference standard for pelvic size was CT Pelvimetry. Pelvic adequacy was defined as an anterior-posterior diameter of the inlet of > or =11 cm and an anterior-posterior diameter of the outlet > or =10 cm on erect lateral CT pelvimetry. Women with values lower than these were regarded as having an inadequate pelvis. The diagnostic accuracy of the models was determined by the area under the receiver operating characteristic curve (AUC). The area under the curve (AUC) for maternal height (0.768) was not significantly greater than that for shoe size (0.686, p = 0.163 for the difference in AUC's) and weight at the last clinic visit (0.655, p = 0.057 for the difference in the AUCs). The change in the AUC for each of the models (the full model with height, shoe size and weight [0.769]; model for height and shoe size [0.767] model for just height [0.768]) was also not significantly different. Measurements of maternal height, shoe size and weight at the last clinic visit are not useful for the identification of women with inadequate pelvis.

The distribution of the indicator height for age of Mexican children and adolescents with Down syndrome according to different reference standards.

PubMed

Peña Rivera, Adriana Graciela; Vásquez Garibay, Edgar Manuel; Troyo Sanromán, Rogelio; Romero Velarde, Enrique; Caro Sabido, Erika; Ramírez Díaz, Joanie

2015-06-01

To compare the indicator height for age in Mexican children with Down Syndrome (DS) with two different reference patterns of growth (American and Spanish) that might be suitable for the Mexican population. A cross-sectional study was performed including 235 Mexican children and adolescents of both sexes with DS aged 45 days to 16 years enrolled in two specialized schools in the metropolitan area of Guadalajara. The dependent variables were weight/age; height/age; weight/ height and BMI. The data expressed was percentiles and the chi-square test was used to compare the distribution of the height/age index with American and Spanish reference patterns. In addition, a chi-square test was performed for the goodness of fit of the height/age index, with breakpoints lower and greater than the 50th percentile. The percentage of participants who were below the 50th percentile in the height/age index was significantly higher with the Spanish vs. the American reference pattern. The chi-square test for goodness of fit showed that the frequency of cases located below the 50th percentile in the height/age index was significantly higher with the American pattern in the age groups of 0 to 36 months (p = 0.022) and 37 to 72 months (p <0.001), but it was not significant (p = 0.225) in the older than 72 months age group. The American reference pattern is a better fit for the growth of Mexican children with DS compared with the Spanish reference pattern, and the distribution profile obtained with the standard growth and WHO reference was not suitable for the assessment of children with Down syndrome. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Apron heights around stepped massifs in the Cydonia Mensae region: Do they record the local paleobathymetry of Oceanus Borealis?

NASA Technical Reports Server (NTRS)

Parker, T. J.; Gorsline, D. S.

1993-01-01

The use of photoclinometry and shadow measurements to determine the basin volume without linking the measurements to a global datum is described. Since the boundary, or shoreline, of the basin cannot be tied to the datum and typically has no useful local relative height to measure, what is needed is a number of measurements of the height of the paleoshorelines distributed across the basin. Photoclinometric profiles are being compiled from Viking Orbiter images of the Cydonia Mensae region, which includes images with high sun elevations, necessary to avoid shadows, and images with low sun elevations, to enable the use of shadow measurements as an independent check, at high resolution (40 to 100 m/pixel). Both asymmetric and symmetric photoclinometric profile models are being used, and the results cross checked with one another to minimize errors. An apron-height map, potentially a paleobathymetric map of part of the margin of Oceanus Borealis, can be compiled from this data to determine whether variations in apron height are consistent with a lacustrine interpretation.

[Classification of Colombian children with malnutrition according to NCHS reference or WHO standard].

PubMed

Velásquez, Claudia; Bermúdez, Juliana; Echeverri, Claudia; Estrada, Alejandro

2011-12-01

A descriptive study was conducted to evaluate the concordance of National Center for Health Statistics reference (NCHS) used to classify undernourished children from Colombia with the WHO Child Growth Standards. We used data from children aged 6 to 59 months with acute malnutrition (Z <-2) and severe (Z <-3) who were admitted to the "Unidad Vida Infantil" nutrition program in Colombia. Indicators height-for-age, weight for-height were analyzed when they were admitted to the hospital and weight for-height leaving the hospital. A statistical method used to compare means was T-student. Correlation coefficient intraclass (CCI) and Kappa index evaluated the concordance between NCHS and OMS; McNemar method evaluated the changes on the nutritional classification for children according to growth devices used. Of the total number of children classified as normal by NCHS, 10.4% were classified as stunted by WHO. 64% of the children admitted to the hospital presented acute malnutrition according to NCHS, of these 44,8% presented severe emaciation according to OMS, indeed severe emaciation increased of 36,0% to 63,3% using OMS. 5% of children leaving the hospital could need to stay more days if they had been evaluated with OMS. Growth devices shown high concordance in height-for-age (CCI = 0,988; k= 0,866) and weight for-height (CCI = 0,901; k = 0,578). Concluded that OMS growth standards classified more malnourished children and more severe states, in addition more malnourished children could be hospitalized and they could stay more days.

Towards standardized assessment of endoscope optical performance: geometric distortion

NASA Astrophysics Data System (ADS)

Wang, Quanzeng; Desai, Viraj N.; Ngo, Ying Z.; Cheng, Wei-Chung; Pfefer, Joshua

2013-12-01

Technological advances in endoscopes, such as capsule, ultrathin and disposable devices, promise significant improvements in safety, clinical effectiveness and patient acceptance. Unfortunately, the industry lacks test methods for preclinical evaluation of key optical performance characteristics (OPCs) of endoscopic devices that are quantitative, objective and well-validated. As a result, it is difficult for researchers and developers to compare image quality and evaluate equivalence to, or improvement upon, prior technologies. While endoscope OPCs include resolution, field of view, and depth of field, among others, our focus in this paper is geometric image distortion. We reviewed specific test methods for distortion and then developed an objective, quantitative test method based on well-defined experimental and data processing steps to evaluate radial distortion in the full field of view of an endoscopic imaging system. Our measurements and analyses showed that a second-degree polynomial equation could well describe the radial distortion curve of a traditional endoscope. The distortion evaluation method was effective for correcting the image and can be used to explain other widely accepted evaluation methods such as picture height distortion. Development of consensus standards based on promising test methods for image quality assessment, such as the method studied here, will facilitate clinical implementation of innovative endoscopic devices.

Growth reference centiles and secular changes in Turkish children and adolescents.

PubMed

Ozer, Başak Koca

2007-07-01

The purpose of the study is to develop current reference growth centiles for Turkish children and adolescents. A cross-sectional growth survey was conducted on 1.427 (709 boys and 718 girls) healthy schoolchildren aged 6-17 years in Ankara, the capital city of Turkey. As an indicator of socio-economic status, the occupation of the parents was recorded. Growth references of height, weight, body mass index (BMI), sitting height, iliospinal height, relative iliospinal height and relative sitting height were constructed by the LMS method. Sex differences, association of parental occupation with height and BMI standard deviation scores were assessed by analyses of variance. Results showed significant sexual dimorphism for height, weight, sitting height and iliospinal height (p<0.001). Significant effect of socio-economic background was found on height and BMI. The prevalence of overweight and obesity was found using the International Obesity Task Force (IOTF) reference criteria 22.4% and 5.6% in boys and 21.2% and 3% in girls. Present results demonstrated an increment during the last three decades in height, leg length and weight curves which is more prominent in boys, but not in the sitting height. This positive secular change appears to be a logical outcome of the gradual changes in nutrition, health care and education, and environmental and economic conditions.

A height-for-age growth reference for children with achondroplasia: Expanded applications and comparison with original reference data.

PubMed

Hoover-Fong, Julie; McGready, John; Schulze, Kerry; Alade, Adekemi Yewande; Scott, Charles I

2017-05-01

The height-for-age (HA) reference currently used for children with achondroplasia is not adaptable for electronic records or calculation of HA Z-scores. We report new HA curves and tables of mean and standard deviation (SD) HA, for calculating Z-scores, from birth-16 years in achondroplasia. Mixed longitudinal data were abstracted from medical records of achondroplasia patients from a single clinical practice (CIS, 1967-2004). Gender-specific height percentiles (5, 25, 50, 75, 95th) were estimated across the age continuum, using a 2 month window per time point smoothed by a quadratic smoothing algorithm. HA curves were constructed for 0-36 months and 2-16 years to optimize resolution for younger children. Mean monthly height (SD) was tabulated. These novel HA curves were compared to reference data currently in use for children with achondroplasia. 293 subjects (162 male/131 female) contributed 1,005 and 932 height measures, with greater data paucity with age. Mean HA tracked with original achondroplasia norms, particularly through mid-childhood (2-9 years), but with no evidence of a pubertal growth spurt. Standard deviation of height at each month interval increased from birth through 16 years. Birth length was lower in achondroplasia than average stature and, as expected, height deficits increased with age. A new HA reference is available for longitudinal growth assessment in achondroplasia, taking advantage of statistical modeling techniques and allowing for Z-score calculations. This is an important contribution to clinical care and research endeavors for the achondroplasia population. © 2017 Wiley Periodicals, Inc.

Source of parental reports of child height and weight during phone interviews and influence on obesity prevalence estimates among children aged 3-17 years.

PubMed

Skinner, Asheley Cockrell; Miles, Donna; Perrin, Eliana M; Coyne-Beasley, Tamera; Ford, Carol

2013-01-01

We compared parental reports of children's height and weight when the values were estimated vs. parent-measured to determine how these reports influence the estimated prevalence of childhood obesity. In the 2007 and 2008 North Carolina Child Health Assessment and Monitoring Program surveys, parents reported height and weight for children aged 3-17 years. When parents reported the values were not measured (by doctor, school, or home), they were asked to measure their child and were later called back. We categorized body mass index status using standard CDC definitions, and we used Chi-square tests and the Stuart-Maxwell test of marginal homogeneity to examine reporting differences. About 80% (n=509) of the 638 parents who reported an unmeasured height and/or weight participated in a callback and provided updated measures. Children originally classified as obese were subsequently classified as obese (67%), overweight (13%), and healthy weight (19%). An estimated 28% of younger children (<10 years of age) vs. 6% of older children (aged ≥10 years) were reclassified on callback. Having parents who guessed the height and weight of their children and then reported updated values did not significantly change the overall population estimates of obesity. Our findings demonstrate that using parent-reported height and weight values may be sufficient to provide reasonable estimates of obesity prevalence. Systematically asking the source of height and weight information may help improve how it is applied to research of the prevalence of childhood obesity when gold-standard measurements are not available.

Height and Weight of Children in the United States, India, and the United Arab Republic: Presentation and Analysis of Comparative Data on Standard Height and Weight of Children Aged 6 Through 11 Years.

ERIC Educational Resources Information Center

McDowell, Arthur J.; And Others

This report presents and analyzes data on standing height and on weight of children aged 6 through 11 years in the United States, India, and the United Arab Republic. Data for all three countries come from representative national samples and present the first opportunity to compare data from several countries that are broadly representative of the…

Characterization of x-ray framing cameras for the National Ignition Facility using single photon pulse height analysis.

PubMed

Holder, J P; Benedetti, L R; Bradley, D K

2016-11-01

Single hit pulse height analysis is applied to National Ignition Facility x-ray framing cameras to quantify gain and gain variation in a single micro-channel plate-based instrument. This method allows the separation of gain from detectability in these photon-detecting devices. While pulse heights measured by standard-DC calibration methods follow the expected exponential distribution at the limit of a compound-Poisson process, gain-gated pulse heights follow a more complex distribution that may be approximated as a weighted sum of a few exponentials. We can reproduce this behavior with a simple statistical-sampling model.

Combination growth hormone and gonadotropin releasing hormone analog therapy in 11beta-hydroxylase deficiency.

PubMed

Bajpai, Anurag; Kabra, Madhulika; Menon, P S N

2006-06-01

Diagnosis of 11beta-hydroxylase deficiency was made in a boy at the age of 2 1/2 years on the basis of peripheral precocious puberty, growth acceleration (height standard deviation score +4.4) with advanced skeletal maturation (bone age 8.4 years) and elevated deoxycortisol levels. Glucocorticoid supplementation led to normalization of blood pressure but was associated with progression to central precocious puberty and increase in bone age resulting in decrease in predicted adult height to 133.7 cm (target height 163 cm). The child was started on GnRH analog (triptorelin 3.75 mg every 28 days), which led to improvement in predicted adult height by 3.1 cm over 15 months. Addition of growth hormone (0.1 IU/kg/day) resulted in improvement in predicted adult height (151 cm) and height deficit (12 cm) over the next 3.6 years. Final height (151 cm) exceeded predicted height at the initiation of GnRH analog treatment by 17.3 cm. This report suggests that combination GH and GnRH analog treatment may be useful in improving height outcome in children with 11beta-hydroxylase deficiency and compromised final height.

Analysis of In-Canyon Flow Characterisitcs in step-up street canyons

NASA Astrophysics Data System (ADS)

PARK, S.; Kim, J.; Choi, W.; Pardyjak, E.

2017-12-01

Flow characteristics in strep-up street canyons were investigated focusing on in-canyon region. To see the effects of the building geometry, two building height ratios [ratio of the upwind (Hu) to downwind building heights (Hd) = 0.33, 0.6] were considered and eight building length ratios [ratio of the cross-wind building length (L) to street-canyon width (S) from 0.5 to 4 with the increment of 0.5] were systematically changed. For the model validation, the simulated results were compared with the wind- tunnel data measured for Hu/Hd = 0.33, 0.6 and L/S = 1, 2, 3, and 4. In the CFD model simulations, the corner vortices at the downwind side near the ground level and the recirculation zones above the downwind buildings had the relatively small extents, compared with those in the wind-tunnel experiments. However, the CFD model reproduced the main flow features such as the street-canyon vortices, circulations above the building roof, and the positions of the stagnation points on the downwind building walls in the wind-tunnel experiments reasonably well. By further analyzing the three-dimensional flow structures based on the numerical results simulated in the step-up street canyons, we schematically suggested the flow characteristics with different building-height and building-length ratios.

Control of a three-dimensional turbulent shear layer by means of oblique vortices

NASA Astrophysics Data System (ADS)

Jürgens, Werner; Kaltenbach, Hans-Jakob

2018-04-01

The effect of local forcing on the separated, three-dimensional shear layer downstream of a backward-facing step is investigated by means of large-eddy simulation for a Reynolds number based on the step height of 10,700. The step edge is either oriented normal to the approaching turbulent boundary layer or swept at an angle of 40°. Oblique vortices with different orientation and spacing are generated by wavelike suction and blowing of fluid through an edge parallel slot. The vortices exhibit a complex three-dimensional structure, but they can be characterized by a wavevector in a horizontal section plane. In order to determine the step-normal component of the wavevector, a method is developed based on phase averages. The dependence of the wavevector on the forcing parameters can be described in terms of a dispersion relation, the structure of which indicates that the disturbances are mainly convected through the fluid. The introduced vortices reduce the size of the recirculation region by up to 38%. In both the planar and the swept case, the most efficient of the studied forcings consists of vortices which propagate in a direction that deviates by more than 50° from the step normal. These vortices exhibit a spacing in the order of 2.5 step heights. The upstream shift of the reattachment line can be explained by increased mixing and momentum transport inside the shear layer which is reflected in high levels of the Reynolds shear stress -ρ \\overline{u'v'}. The position of the maximum of the coherent shear stress is found to depend linearly on the wavelength, similar to two-dimensional free shear layers.

POD analysis of flow over a backward-facing step forced by right-angle-shaped plasma actuator.

PubMed

Wang, Bin; Li, Huaxing

2016-01-01

This study aims to present flow control over the backward-facing step with specially designed right-angle-shaped plasma actuator and analyzed the influence of various scales of flow structures on the Reynolds stress through snapshot proper orthogonal decomposition (POD). 2D particle image velocimetry measurements were conducted on region (x/h = 0-2.25) and reattachment zone in the x-y plane over the backward-facing step at a Reynolds number of Re h  = 27,766 (based on step height [Formula: see text] and free stream velocity [Formula: see text]. The separated shear layer was excited by specially designed right-angle-shaped plasma actuator under the normalized excitation frequency St h  ≈ 0.345 along the 45° direction. The spatial distribution of each Reynolds stress component was reconstructed using an increasing number of POD modes. The POD analysis indicated that the flow dynamic downstream of the step was dominated by large-scale flow structures, which contributed to streamwise Reynolds stress and Reynolds shear stress. The intense Reynolds stress localized to a narrow strip within the shear layer was mainly affected by small-scale flow structures, which were responsible for the recovery of the Reynolds stress peak. With plasma excitation, a significant increase was obtained in the vertical Reynolds stress peak. Under the dimensionless frequencies St h  ≈ 0.345 and [Formula: see text] which are based on the step height and momentum thickness, the effectiveness of the flow control forced by the plasma actuator along the 45° direction was ordinary. Only the vertical Reynolds stress was significantly affected.

Evaluation of maxillary anterior teeth and their relation to the golden proportion in Malaysian population.

PubMed

Al-Marzok, Maan Ibrahim; Majeed, Kais Raad Abdul; Ibrahim, Ibrahim Khalil

2013-01-24

The maxillary anterior teeth are important in achieving pleasing dental aesthetics. Various methods are used to measure the size and form of them, including the golden proportion between their perceived widths, and the width-to-height ratio, referred to as the golden standard. The purpose of this study was conducted to evaluate whether consistent relationships exist between tooth width and height of the clinical crown dimensions; and to investigate the occurrence of the golden proportion of the maxillary anterior teeth. Dental casts of the maxillary arches were made in this cross-sectional study from MAHSA University College students who met the inclusion criteria. The 49 participants represented the Malaysian population main ethnics. The dimensions of the anterior teeth and the perceived width of anterior teeth viewed from front were measured using a digital caliper. Comparison of the perceived width ratio of lateral to central incisor and canine to lateral incisor with the golden proportion of 0.618 revealed there were a significant statistical difference (p < 0.05). The statistical difference was significant for the width-to-height ratio of central incisors to the golden standard of 80%. There was no significant difference in the comparison among ethnic groups for the golden proportion and the golden standard. The golden proportion was not found to exist between the perceived widths of maxillary anterior teeth. No golden standard were detected for the width-to-height proportions of maxillary incisors. Specific population characteristics and perception of beauty must be considered. However, ethnicity has no association with the proportions of maxillary anterior teeth.

Temperature dependent electrical characteristics of Zn/ZnSe/n-GaAs/In structure

NASA Astrophysics Data System (ADS)

Sağlam, M.; Güzeldir, B.

2016-04-01

We have reported a study of the I-V characteristics of Zn/ZnSe/n-GaAs/In sandwich structure in a wide temperature range of 80-300 K by a step of 20 K, which are prepared by Successive Ionic Layer Adsorption and Reaction (SILAR) method. The main electrical parameters, such as ideality factor and zero-bias barrier height determined from the forward bias I-V characteristics were found strongly depend on temperature and when the increased, the n decreased with increasing temperature. The ideality factor and barrier height values as a function of the sample temperature have been attributed to the presence of the lateral inhomogeneities of the barrier height. Furthermore, the series resistance have been calculated from the I-V measurements as a function of temperature dependent.

Contrasting plant height can improve the control of rain-borne diseases in wheat cultivar mixture: modelling splash dispersal in 3-D canopies.

PubMed

Vidal, T; Gigot, C; de Vallavieille-Pope, C; Huber, L; Saint-Jean, S

2018-06-08

Growing cultivars differing by their disease resistance level together (cultivar mixtures) can reduce the propagation of diseases. Although architectural characteristics of cultivars are little considered in mixture design, they could have an effect on disease, in particular through spore dispersal by rain splash, which occurs over short distances. The objective of this work was to assess the impact of plant height of wheat cultivars in mixtures on splash dispersal of Zymoseptoria tritici, which causes septoria tritici leaf blotch. We used a modelling approach involving an explicit description of canopy architecture and splash dispersal processes. The dispersal model computed raindrop interception by a virtual canopy as well as the production, transport and interception of splash droplets carrying inoculum. We designed 3-D virtual canopies composed of susceptible and resistant plants, according to field measurements at the flowering stage. In numerical experiments, we tested different heights of virtual cultivars making up binary mixtures to assess the influence of this architectural trait on dispersal patterns of spore-carrying droplets. Inoculum interception decreased exponentially with the height relative to the main inoculum source (lower diseased leaves of susceptible plants), and little inoculum was intercepted further than 40 cm above the inoculum source. Consequently, tall plants intercepted less inoculum than smaller ones. Plants with twice the standard height intercepted 33 % less inoculum than standard height plants. In cases when the height of suscpeptible plants was doubled, inoculum interception by resistant leaves was 40 % higher. This physical barrier to spore-carrying droplet trajectories reduced inoculum interception by tall susceptible plants and was modulated by plant height differences between cultivars of a binary mixture. These results suggest that mixture effects on spore dispersal could be modulated by an adequate choice of architectural characteristics of cultivars. In particular, even small differences in plant height could reduce spore dispersal.

Growth Outcomes After GH Therapy of Patients Given Long-Term Corticosteroids for Juvenile Idiopathic Arthritis.

PubMed

David, Hélène; Aupiais, Camille; Louveau, Baptiste; Quartier, Pierre; Jacqz-Aigrain, Evelyne; Carel, Jean-Claude; Simon, Dominique

2017-12-01

Growth hormone (GH) therapy may improve statural growth outcomes in patients with severe juvenile idiopathic arthritis (JIA). To evaluate the effect of GH treatment on adult height and to identify determinants of growth outcomes in JIA. Data from 58 patients with JIA, including 53 receiving GH, enrolled in three prospective clinical trials between 1997 and 2002 were analyzed. GH (0.056 mg/kg/d [interquartile range (IQR), 0.050 to 0.062]) for a median duration of 6.5 years (IQR, 4.7 to 7.9 years). Factors associated with a favorable growth outcome (adult height - target height ≤ -1.5 standard deviations) were identified by multivariate logistic regression. Adult height was available for 48 patients 8.6 years after GH initiation (IQR, 6.0 to 10.2 years). Height standard deviation score (SDS) increased from -2.9 (IQR, -4.4 to -1.6) at baseline to -1.7 (IQR, -3.9 to -0.1) in adulthood (P < 0.001). Median adult height was below target height [SDS, -0.2 (IQR, -1.4 to 0.4); P < 0.001]. Corrected adult height SDS was -1.3 (IQR, -3.0 to -0.2). Growth outcome was favorable in 24 (52.2%) patients. Significant independent determinants of growth outcome were age at GH initiation [adjusted odds ratio (aOR), 0.68 per additional year; 95% confidence interval (CI), 0.47 to 0.99], height at GH initiation (aOR, 2.6 per additional SDS; 95% CI, 1.15 to 5.9), and mean C-reactive protein levels during follow up (aOR, 0.51 per additional 10 mg/L; 95% CI, 0.28 to 0.92). Long-term GH treatment significantly increased growth in patients with JIA but did not fully restore the genetic growth potential. The response showed marked interindividual variability and was weaker in patients with severe inflammation. Copyright © 2017 Endocrine Society

Affordance Boundaries Are Defined by Dynamic Capabilities of Parkour Athletes in Dropping from Various Heights

PubMed Central

Croft, James L.; Bertram, John E. A.

2017-01-01

Available behaviors are determined by the fit between features of the individual and reciprocal features of the environment. Beyond some critical boundary certain behaviors become impossible causing sudden transitions from one movement pattern to another. Parkour athletes have developed multiple movement patterns to deal with their momentum during landing. We were interested in whether drop distance would cause a sudden transition between a two-footed (precision) landing and a load-distributing roll and whether the transition height could be predicted by dynamic and geometric characteristics of individual subjects. Kinematics and ground reaction forces were measured as Parkour athletes stepped off a box from heights that were incrementally increased or decreased from 0.6 to 2.3 m. Individuals were more likely to roll from higher drops; those with greater body mass and less explosive leg power, were more likely to transition to a roll landing at a lower height. At some height a two-footed landing is no longer feasible but for some athletes this height was well within the maximum drop height used in this study. During low drops the primary task constraint of managing momentum could be achieved with either a precision landing or a roll. This meant that participants were free to select their preferred landing strategy, which was only partially influenced by the physical demands of the task. However, athletes with greater leg power appeared capable of managing impulse absorption through a leg mediated strategy up to a greater drop height. PMID:28979219

[Validity of anthropometric measurements and weight perceptions reported by relatives of children under 4 years old].

PubMed

Patiño-Villena, Begoña; Chirlaque, María Dolores; Salmerón, Diego; González, Eduardo; Navarro, Carmen

2016-01-01

To assess the validity of weight and height measurements reported by parents and the perception of their children's weight status in order to assess the prevalence of overweight children under 4 years old. Cross-sectional study. Anthropometric data was collected by self-report questionnaires completed by parents of children 3-45 months old: 1) information from paediatric check-ups (gold standard); 2) information reported from the home environment; and 3) data from individual perceptions. WHO standards were used. Reported height was underestimated, thus reported weight/height and BMI/age were overestimated. Overweight prevalence according to paediatric check-ups was 18.6%, compared to 26.5% reported prevalence, showing a moderate concordance (Kappa: 0.47 [0.34-0.60]), 70% sensitivity and 84% specificity. Subjective perception was 11.2%, representing 30% sensitivity and 93% specificity. The reported information has little validity for population-based studies, as height is underestimated and overweight status is not correctly perceived due to distortion of individual perception. Questionnaires must be validated and awareness raised among families. Copyright © 2016 SESPAS. Published by Elsevier Espana. All rights reserved.

Centralization or decentralization of facial structures in Korean young adults.

PubMed

Yoo, Ja-Young; Kim, Jeong-Nam; Shin, Kang-Jae; Kim, Soon-Heum; Choi, Hyun-Gon; Jeon, Hyun-Soo; Koh, Ki-Seok; Song, Wu-Chul

2013-05-01

It is well known that facial beauty is dictated by facial type, and harmony between the eyes, nose, and mouth. Furthermore, facial impression is judged according to the overall facial contour and the relationship between the facial structures. The aims of the present study were to determine the optimal criteria for the assessment of gathering or separation of the facial structures and to define standardized ratios for centralization or decentralization of the facial structures.Four different lengths were measured, and 2 indexes were calculated from standardized photographs of 551 volunteers. Centralization and decentralization were assessed using the width index (interpupillary distance / facial width) and height index (eyes-mouth distance / facial height). The mean ranges of the width index and height index were 42.0 to 45.0 and 36.0 to 39.0, respectively. The width index did not differ with sex, but males had more decentralized faces, and females had more centralized faces, vertically. The incidence rate of decentralized faces among the men was 30.3%, and that of centralized faces among the women was 25.2%.The mean ranges in width and height indexes have been determined in a Korean population. Faces with width and height index scores under and over the median ranges are determined to be "centralized" and "decentralized," respectively.

Prediction of adult height in girls: the Beunen-Malina-Freitas method.

PubMed

Beunen, Gaston P; Malina, Robert M; Freitas, Duarte L; Thomis, Martine A; Maia, José A; Claessens, Albrecht L; Gouveia, Elvio R; Maes, Hermine H; Lefevre, Johan

2011-12-01

The purpose of this study was to validate and cross-validate the Beunen-Malina-Freitas method for non-invasive prediction of adult height in girls. A sample of 420 girls aged 10-15 years from the Madeira Growth Study were measured at yearly intervals and then 8 years later. Anthropometric dimensions (lengths, breadths, circumferences, and skinfolds) were measured; skeletal age was assessed using the Tanner-Whitehouse 3 method and menarcheal status (present or absent) was recorded. Adult height was measured and predicted using stepwise, forward, and maximum R (2) regression techniques. Multiple correlations, mean differences, standard errors of prediction, and error boundaries were calculated. A sample of the Leuven Longitudinal Twin Study was used to cross-validate the regressions. Age-specific coefficients of determination (R (2)) between predicted and measured adult height varied between 0.57 and 0.96, while standard errors of prediction varied between 1.1 and 3.9 cm. The cross-validation confirmed the validity of the Beunen-Malina-Freitas method in girls aged 12-15 years, but at lower ages the cross-validation was less consistent. We conclude that the Beunen-Malina-Freitas method is valid for the prediction of adult height in girls aged 12-15 years. It is applicable to European populations or populations of European ancestry.

Spatial inhomogeneous barrier heights at graphene/semiconductor Schottky junctions

NASA Astrophysics Data System (ADS)

Tomer, Dushyant

Graphene, a semimetal with linear energy dispersion, forms Schottky junction when interfaced with a semiconductor. This dissertation presents temperature dependent current-voltage and scanning tunneling microscopy/spectroscopy (STM/S) measurements performed on graphene Schottky junctions formed with both three and two dimensional semiconductors. To fabricate Schottky junctions, we transfer chemical vapor deposited monolayer graphene onto Si- and C-face SiC, Si, GaAs and MoS2 semiconducting substrates using polymer assisted chemical method. We observe three main type of intrinsic spatial inhomogeneities, graphene ripples, ridges and semiconductor steps in STM imaging that can exist at graphene/semiconductor junctions. Tunneling spectroscopy measurements reveal fluctuations in graphene Dirac point position, which is directly related to the Schottky barrier height. We find a direct correlation of Dirac point variation with the topographic undulations of graphene ripples at the graphene/SiC junction. However, no such correlation is established at graphene/Si and Graphene/GaAs junctions and Dirac point variations are attributed to surface states and trapped charges at the interface. In addition to graphene ripples and ridges, we also observe atomic scale moire patterns at graphene/MoS2 junction due to van der Waals interaction at the interface. Periodic topographic modulations due to moire pattern do not lead to local variation in graphene Dirac point, indicating that moire pattern does not contribute to fluctuations in electronic properties of the heterojunction. We perform temperature dependent current-voltage measurements to investigate the impact of topographic inhomogeneities on electrical properties of the Schottky junctions. We observe temperature dependence in junction parameters, such as Schottky barrier height and ideality factor, for all types of Schottky junctions in forward bias measurements. Standard thermionic emission theory which assumes a perfect smooth interface fails to explain such behavior, hence, we apply a modified emission theory with Gaussian distribution of Schottky barrier heights. The modified theory, applicable to inhomogeneous interfaces, explains the temperature dependent behavior of our Schottky junctions and gives a temperature independent mean barrier height. We attribute the inhomogeneous barrier height to the presence of graphene ripples and ridges in case of SiC and MoS2 while surface states and trapped charges at the interface is dominating in Si and GaAs. Additionally, we observe bias dependent current and barrier height in reverse bias regime also for all Schottky junctions. To explain such behavior, we consider two types of reverse bias conduction mechanisms; Poole-Frenkel and Schottky emission. We find that Poole-Frenkel emission explains the characteristics of graphene/SiC junctions very well. However, both the mechanism fails to interpret the behavior of graphene/Si and graphene/GaAs Schottky junctions. These findings provide insight into the fundamental physics at the interface of graphene/semiconductor junctions.

Effects of cane length and diameter and judgment type on the constant error ratio for estimated height in blindfolded, visually impaired, and sighted participants.

PubMed

Huang, Kuo-Chen; Leung, Cherng-Yee; Wang, Hsiu-Feng

2010-04-01

The purpose of this study was to assess the ability of blindfolded, visually impaired, and sighted individuals to estimate object height as a function of cane length, cane diameter, and judgment type. 48 undergraduate students (ages 20 to 23 years) were recruited to participate in the study. Participants were divided into low-vision, severely myopic, and normal-vision groups. Five stimulus heights were explored with three cane lengths, varying cane diameters, and judgment types. The participants were asked to estimate the stimulus height with or without reference to a standard block. Results showed that the constant error ratio for estimated height improved with decreasing cane length and comparative judgment. The findings were unclear regarding the effect of cane length on haptic perception of height. Implications were discussed for designing environments, such as stair heights, chairs, the magnitude of apertures, etc., for visually impaired individuals.

Illusory spirals and loops in crystal growth

PubMed Central

Shtukenberg, Alexander G.; Zhu, Zina; Bhandari, Misha; Song, Pengcheng; Kahr, Bart; Ward, Michael D.

2013-01-01

The theory of dislocation-controlled crystal growth identifies a continuous spiral step with an emergent lattice displacement on a crystal surface; a mechanistic corollary is that closely spaced, oppositely winding spirals merge to form concentric loops. In situ atomic force microscopy of step propagation on pathological l-cystine crystals did indeed show spirals and islands with step heights of one lattice displacement. We show by analysis of the rates of growth of smaller steps only one molecule high that the major morphological spirals and loops are actually consequences of the bunching of the smaller steps. The morphology of the bunched steps actually inverts the predictions of the theory: Spirals arise from pairs of dislocations, loops from single dislocations. Only through numerical simulation of the growth is it revealed how normal growth of anisotropic layers of molecules within the highly symmetrical crystals can conspire to create features in apparent violation of the classic theory. PMID:24101507

Round robin test on V-shape bio-imaging transfer standard for determination of the instrument transfer function of 3D optical profilers

NASA Astrophysics Data System (ADS)

Bermudez, Carlos; Artigas, Roger; Martinez, Pol; Nolvi, Anton; Järvinen, Miikka; Hæggström, Edward; Kassamakov, Ivan

2018-02-01

A V-shape Bio-Transfer-Standard (V-BTS), developed and produced at the University of Helsinki (UH), was measured in two laboratories. In comparison to Siemens Star calibration specimens, the V-BTS performs better at high lateral frequencies close to the diffraction limit of the optical instrument. This permits determining of the Instrument Transfer Function (ITF). The V-BTS features two lipid bilayer steps that partly overlap each other at an angle of 20°, with an average height of 4.6 +/- 0.1 nm. The Round Robin (RR) test aims to determine whether the V-BTS and the developed application protocol work with different optical profilers in different laboratories. First the artefact was measured at Sensofar-Tech, S.L. using an S-neox profiler working in Phase Shifting Interferometry mode. Then V-BTS was measured at UH using a custom-built Scanning White Light Interferometer. All measurements done by four different operators at the two laboratories have a range or standard deviation of +/-0.1 nm which agrees with the theoretical estimates and with measurements done using an atomic force microscope and with a surface plasmon resonance based instrument. The RR results show the applicability of the V-BTS for calibration and for ITF characterization of 3D optical profilers.

Will the light truck bumper height-matching standard reduce deaths in cars?

PubMed

Ossiander, Eric M; Koepsell, Thomas D; McKnight, Barbara

2013-03-01

In a collision between a car and a sport utility vehicle (SUV) or pickup truck, car occupants are more likely to be killed than if they crashed with another car. Some of the excess risk may be due to the propensity of SUVs and pickups with high bumpers to override the lower bumpers in cars. To reduce this incompatibility, particularly in head-on collisions, in 2003 automobile manufacturers voluntarily established a bumper height-matching standard for pickups and SUVs. To assess whether height-matching bumpers in pickups and SUVs were associated with the risk of death in either car occupants or pickup and SUV occupants. Case-control study of collisions between one car and one SUV or pickup in the US during 2000-2008, in which the SUV or pickup was model year 2000-2006. Cases were all decedents in fatal crashes; one control was selected from each crash in a national probability sample of crashes. Occupants of cars that crashed with SUVs or pickups with height-matching bumpers may be at slightly reduced risk of death compared to those that crashed with other SUVs or pickups (adjusted odds ratio: 0.83 (95% confidence interval 0.61-1.13)). There was no evidence of a reduction in risk in head-on crashes (1.09 (0.66-1.79)). In crashes in which the SUV or pickup struck the car on the side, height-matched bumpers were associated with a reduced risk of death (0.68 (0.48-0.97)). Occupants of SUVs and pickups with height-matching bumpers may also be at slightly reduced risk of death (0.91 (0.64-1.28)). Height-matching bumpers were associated with a reduced risk of death among car occupants in crashes in which SUVs or pickups struck cars in the side, but there was little evidence of an effect in head-on crashes. The new bumper height-matching standard may not achieve its primary goal of reducing deaths in head-on crashes, but may modestly reduce overall deaths in crashes between cars and SUVs or pickups because of unanticipated benefits to car occupants in side crashes, and a possible beneficial effect to SUV and pickup occupants. Copyright © 2012 Elsevier Ltd. All rights reserved.

[Comparative study of height and age at menarche according to the socioeconomic level in Venezuela].

PubMed

López Contreras, M; Tovar Escobar, G; Farid Coupal, N; Landaeta Jiménez, M; Méndez Castellano, H

1981-12-01

This is a retrospective study based on growth and development data published in Venezuela by various authors in the period 1936-1978. The data on height for males of the middle and high socioeconomic strata show growth curves which are very similar to the standards for British children. Likewise, the girls of the same socioeconomic condition follow the British standards, but only up to about 10-12 years of age. After that age, the girls studied by the Venezuelan authors, show a pattern of early maturation with a corresponding lower adult height compared with their British counterparts. There were differences in the growth curves according to the socioeconomic strata. These differences were more marked in the girls data. A secular increase for height was discerned, from the published data, in all socioeconomic strata and in both sexes. The data on sexual maturation showed a tendency for progressively early menarche in Venezuelan girls. These changes in growth in height and age of menarche were more notorious and came about at an earlier age in the upper socioeconomic strata. They were less marked, not constant, and came about later in the lower socioeconomic groups. The secular changes in height and sexual maturation apparent from these data, could be explained by an improvement in the environmental conditions, especially nutrition and hygiene of the population, and also be genetic heterosis from European immigration and with improvement in communications.

A new customized fetal growth standard for African American women: the PRB/NICHD Detroit Study

PubMed Central

Tarca, Adi L.; Romero, Roberto; Gudicha, Dereje W.; Erez, Offer; Hernandez-Andrade, Edgar; Yeo, Lami; Bhatti, Gaurav; Pacora, Percy; Maymon, Eli; Hassan, Sonia S.

2018-01-01

Background The assessment of fetal growth disorders requires a standard. Current nomograms for the assessment of fetal growth in African American women have been derived either from neonatal (rather than fetal) biometry data or have not been customized for maternal ethnicity, weight, height, parity, and fetal sex. Objective We sought to 1) develop a new customized fetal growth standard for African American mothers; and 2) compare such a standard to three existing standards for the classification of fetuses as small (SGA) or large (LGA) for gestational age. Study Design A retrospective cohort study included 4,183 women (4,001 African American and 182 Caucasian) from the Detroit metropolitan area who underwent ultrasound examinations between 14 and 40 weeks of gestation (the median number of scans per pregnancy was 5, interquartile range 3-7) and for whom relevant covariate data were available. Longitudinal quantile regression was used to build models defining the “normal” estimated fetal weight (EFW) centiles for gestational age in African American women, adjusted for maternal height, weight, parity, and fetal sex, and excluding pathologic factors with a significant effect on fetal weight. The resulting Perinatology Research Branch/Eunice Kennedy Shriver National Institute of Child Health and Human Development (hereinafter, PRB/NICHD) growth standard was compared to 3 other existing standards—the customized gestation-related optimal weight (GROW) standard; the Eunice Kennedy Shriver National Institute of Child Health and Human Development (hereinafter, NICHD) African American standard; and the multinational World Health Organization (WHO) standard—utilized to screen fetuses for SGA (<10th centile) or LGA (>90th centile) based on the last available ultrasound examination for each pregnancy. Results 1) First, the mean birthweight at 40 weeks was 133g higher for neonates born to Caucasian than to African American mothers and 150g higher for male than female neonates; maternal weight, height, and parity had a positive effect on birthweight.Second, analysis of longitudinal EFW revealed the following features of fetal growth: (1) all weight centiles were about 2% higher for male than for female fetuses; (2) maternal height had a positive effect on EFW, with larger fetuses being affected more (2% increase in the 95th centile of weight for each 10-cm increase in height); and (3) maternal weight and parity had a positive effect on EFW that increased with gestation and varied among the weight centiles. Third, the screen-positive rate for SGA was 7.2% for the NICHD African American standard, 12.3% for the GROW standard, 13% for the WHO standard customized by fetal sex, and 14.4% for the PRB/NICHD customized standard. For all standards, the screen-positive rate for SGA was at least two-fold higher among fetuses delivered preterm than at term.Fourth, the screen-positive rate for LGA was 8.7% for the GROW standard, 9.2% for the PRB/NICHD customized standard, 10.8% for the WHO standard customized by fetal sex, and 12.3% for the NICHD African American standard. Finally, the highest overall agreement among standards was between the GROW and PRB/NICHD customized standards (Cohen’s inter-rater agreement, kappa=0.85). Conclusions We developed a novel customized PRB/NICHD fetal growth standard from fetal data in an African American population without assuming proportionality of the effects of covariates and also without assuming that these effects are equal on all centiles of weight; we also provide an easy-to-use centile calculator. This standard classified more fetuses as being at risk for SGA compared to existing standards, especially among fetuses delivered preterm, but classified about the same number of LGA fetuses. The comparison among the four growth standards also revealed that the most important factor determining agreement among standards is whether they account for the same factors known to affect fetal growth. PMID:29422207

Climatological Processing of Radar Data for the TRMM Ground Validation Program

NASA Technical Reports Server (NTRS)

Kulie, Mark; Marks, David; Robinson, Michael; Silberstein, David; Wolff, David; Ferrier, Brad; Amitai, Eyal; Fisher, Brad; Wang, Jian-Xin; Augustine, David;

Effects of Forward- and Backward-Facing Steps on the Crossflow Receptivity and Stability in Supersonic Boundary Layers

NASA Technical Reports Server (NTRS)

Balakumar, P.; King, Rudolph A.; Eppink, Jenna L.

2014-01-01

The effects of forward- and backward-facing steps on the receptivity and stability of three-dimensional supersonic boundary layers over a swept wing with a blunt leading edge are numerically investigated for a freestream Mach number of 3 and a sweep angle of 30 degrees. The flow fields are obtained by solving the full Navier-Stokes equations. The evolution of instability waves generated by surface roughness is simulated with and without the forward- and backward-facing steps. The separation bubble lengths are about 5-10 step heights for the forward-facing step and are about 10 for the backward-facing step. The linear stability calculations show very strong instability in the separated region with a large frequency domain. The simulation results show that the presence of backward-facing steps decreases the amplitude of the stationary crossflow vortices with longer spanwise wavelengths by about fifty percent and the presence of forward-facing steps does not modify the amplitudes noticeably across the steps. The waves with the shorter wavelengths grow substantially downstream of the step in agreement with the linear stability prediction.

Reliability of Long-Term Wave Conditions Predicted with Data Sets of Short Duration

DTIC Science & Technology

1985-03-01

the validity and reliability of predicted probable wave heights obtained from data of limited duration. BACKGROUND: The basic steps listed by...interest to perform the analysis outlined in steps 2 to 5, the prediction would only be reliable for up to a 3year return period. For a 5-year data set...for long-term hindcast data . The data retrieval and analysis program known as the Sea State Engineering Analysis System (SEAS) makes handling of the

Rock sampling. [method for controlling particle size distribution

NASA Technical Reports Server (NTRS)

Blum, P. (Inventor)

1971-01-01

A method for sampling rock and other brittle materials and for controlling resultant particle sizes is described. The method involves cutting grooves in the rock surface to provide a grouping of parallel ridges and subsequently machining the ridges to provide a powder specimen. The machining step may comprise milling, drilling, lathe cutting or the like; but a planing step is advantageous. Control of the particle size distribution is effected primarily by changing the height and width of these ridges. This control exceeds that obtainable by conventional grinding.

Characterization of Mo/Si multilayer growth on stepped topographies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boogaard, A. J. R. vcan den; Louis, E.; Zoethout, E.

2011-08-31

Mo/Si multilayer mirrors with nanoscale bilayer thicknesses have been deposited on stepped substrate topographies, using various deposition angles. The multilayer morphology at the stepedge region was studied by cross section transmission electron microscopy. A transition from a continuous- to columnar layer morphology is observed near the step-edge, as a function of the local angle of incidence of the deposition flux. Taking into account the corresponding kinetics and anisotropy in layer growth, a continuum model has been developed to give a detailed description of the height profiles of the individual continuous layers. Complementary optical characterization of the multilayer system using amore » microscope operating in the extreme ultraviolet wavelength range, revealed that the influence of the step-edge on the planar multilayer structure is restricted to a region within 300 nm from the step-edge.« less

Hetero-diffusion of Au epitaxy on stepped Ag(110) surface: Study of the jump rate and diffusion coefficient

NASA Astrophysics Data System (ADS)

Benlattar, M.; El koraychy, E.; Kotri, A.; Mazroui, M.

2017-12-01

We have used molecular dynamics simulations combined with an interatomic potential derived from the embedded atom method, to investigate the hetero-diffusion of Au adatom near a stepped Ag(110) surface with the height of one monoatomic layer. The activation energies for different diffusion processes, which occur on the terrace and near the step edge, are calculated both by molecular statics and molecular dynamics simulations. Static energies are found by the drag method, whereas the dynamic barriers are computed at high temperature from the Arrhenius plots. Our numerical results reveal that the jump process requires very high activation energy compared to the exchange process either on the terrace or near the step edge. In this work, other processes, such as upward and downward diffusion at step edges, have also been discussed.

Trends in the Prevalence of Overweight and Obesity among Chinese Preschool Children from 2006 to 2014.

PubMed

Xiao, Yanyu; Qiao, Yijuan; Pan, Lei; Liu, Jin; Zhang, Tao; Li, Nan; Liu, Enqing; Wang, Yue; Liu, Hongyan; Liu, Gongshu; Huang, Guowei; Hu, Gang

2015-01-01

To examine the trends in the prevalence of overweight and obesity among preschool children from 2006 to 2014. A total of 145,078 children aged 3-6 years from 46 kindergartens finished the annual health examination in Tianjin, China. Height, weight and other information were obtained using standardized methods. Z-scores for weight, height, and BMI were calculated based on the standards for the World Health Organization (WHO) child growth standards. From 2006 to 2014, mean values of height z-scores significantly increased from 0.34 to 0.54, mean values of weight z-scores kept constant, and mean values of BMI z-scores significantly decreased from 0.40 to 0.23. Mean values of height z-scores, weight z-scores, and BMI z-scores slightly decreased among children from 3 to 4 years old, and then increased among children from 4 to 6 years old. Between 2006 and 2014, there were no significant changes in prevalence of overweight (BMI z-scores >2 SD) and obesity (BMI z-scores >3 SD) among 3-4 years children. However, prevalence of obesity (BMI z-scores >2 SD) increased from 8.8% in 2006 to 10.1% in 2010, and then kept stable until 2014 among 5-6 years children. Boys had higher prevalence of obesity than girls. Mean values of BMI z-scores decreased from 2006 to 2014 among Chinese children aged 3-6 years old due to the significant increase of height z-scores. Prevalence of obesity increased from 2006 to 2010, and then kept stable until 2014 among children aged 5-6 years. The prevalence of obesity was higher in boys than in girls.

Seat and seatbelt accommodation in fire apparatus: Anthropometric aspects

PubMed Central

Hsiao, Hongwei; Whitestone, Jennifer; Wilbur, Michael; Lackore, J. Roger; Routley, J. Gordon

2015-01-01

This study developed anthropometric information on U.S. firefighters to guide fire-apparatus seat and seatbelt designs and future standards development. A stratified sample of 863 male and 88 female firefighters across the U.S. participated in the study. The study results suggested 498 mm in width, 404 mm in depth, and 365–476 mm in height for seat pans; 429–522 mm in width and 542 mm in height for seat back; 871 mm in height for head support; a seat space of 733 mm at shoulder and 678 mm at hip; and a knee/leg clearance of 909 mm in fire truck cab. Also, 1520 mm of lap belt web effective length and 2828 mm of lap-and-shoulder belt web effective length were suggested. These data for firetruck seats and seatbelts provide a foundation for fire apparatus manufacturers and standards committees to improve firefighter seat designs and seatbelt usage compliance. PMID:26154212

Flood profiles for lower Brooker Creek, west-central Florida

USGS Publications Warehouse

Murphy, W.R.

1978-01-01

Flood heights are computed for a range of recurrence intervals for a 12.6 mile reach of Brooker Creek, beginning at the mouth at Lake Tarpon. A Geological Survey step-backwater computer program, E431, was used in these analyses using: (1) Stream and valley cross-section geometry and roughness data; (2) Recurrence interval flood-peak discharges; (3) Recurrence interval starting elevations; (4) Gaging station stage-discharge relations. Flood heights may be plotted versus distance above stream mouth and connected to construct flood profiles. They may also be used to indicate areas of inundation on detailed topographic maps.

Standardized Six-Step Approach to the Performance of the Focused Basic Obstetric Ultrasound Examination.

PubMed

Abuhamad, Alfred; Zhao, Yili; Abuhamad, Sharon; Sinkovskaya, Elena; Rao, Rashmi; Kanaan, Camille; Platt, Lawrence

2016-01-01

This study aims to validate the feasibility and accuracy of a new standardized six-step approach to the performance of the focused basic obstetric ultrasound examination, and compare the new approach to the regular approach performed in the scheduled obstetric ultrasound examination. A new standardized six-step approach to the performance of the focused basic obstetric ultrasound examination, to evaluate fetal presentation, fetal cardiac activity, presence of multiple pregnancy, placental localization, amniotic fluid volume evaluation, and biometric measurements, was prospectively performed on 100 pregnant women between 18(+0) and 27(+6) weeks of gestation and another 100 pregnant women between 28(+0) and 36(+6) weeks of gestation. The agreement of findings for each of the six steps of the standardized six-step approach was evaluated against the regular approach. In all ultrasound examinations performed, substantial to perfect agreement (Kappa value between 0.64 and 1.00) was observed between the new standardized six-step approach and the regular approach. The new standardized six-step approach to the focused basic obstetric ultrasound examination can be performed successfully and accurately between 18(+0) and 36(+6) weeks of gestation. This standardized approach can be of significant benefit to limited resource settings and in point of care obstetric ultrasound applications. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

A System of Standard Atmospheres

DOE Office of Scientific and Technical Information (OSTI.GOV)

Charles, B.N.

1954-04-06

This report included a proposed new set of Standard Atmospheres mainly to help with the construction and use of the baro tables for the Mk 6 weapon. Temperature-height curves over the world can assume an infinte number of configurations.

A resolution honoring the life and achievements of Dr. Dorothy I. Height.

THOMAS, 111th Congress

Sen. Cardin, Benjamin L. [D-MD

2010-04-20

Senate - 04/20/2010 Submitted in the Senate, considered, and agreed to without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

Catalytic mechanism of human N-acetylserotonin methyltransferase: a theoretical investigation

NASA Astrophysics Data System (ADS)

Wang, Li; Zhang, Ting; Li, Jieqiong; He, Chaozheng; He, Hongqing; Zhang, Jinglai

2015-11-01

The methyl-transfer mechanism of human N-acetylserotonin methyltransferase and the roles of several residues around the active sites are investigated by density function theory method. This enzyme will catalyse the conversion of N-acetylserotonin and S-adenosyl-L-methionine (SAM) into melatonin and S-asenosylhomocysteine, which is the terminal step in the melatonin (N-acetyl-5-methoxytryptamine) biosynthesis. The calculated results confirm that the methyl transfer and proton transfer will take place via a SN2 step with a concerted mechanism, which is different from the experimental estimation via a water bridge. The residues H255, D256, E311, and R252 play an important role in reducing the barrier height and inducing methyl transfer. In addition, a full SAM molecule is considered in this work, which is never explored in previous reports. We find that some residues around the SAM in the centre of active site are essential factors to influence the mechanism and barrier height. So a truncated SAM model may not be suitable for all reactions.

Development of demi-span equations for predicting height among the Malaysian elderly.

PubMed

Ngoh, H J; Sakinah, H; Harsa Amylia, M S

2012-08-01

This study aimed to develop demi-span equations for predicting height in the Malaysian elderly and to explore the applicability of previous published demi-span equations derived from adult populations to the elderly. A cross-sectional study was conducted on Malaysian elderly aged 60 years and older. Subjects were residents of eight shelter homes in Peninsular Malaysia; 204 men and 124 women of Malay, Chinese and Indian ethnicity were included. Measurements of weight, height and demi-span were obtained using standard procedures. Statistical analyses were performed using SPSS version 18.0. The demi-span equations obtained were as follows: Men: Height (cm) = 67.51 + (1.29 x demi-span) - (0.12 x age) + 4.13; Women: Height (cm) = 67.51 + (1.29 x demi-span) - (0.12 x age). Height predicted from these new equations demonstrated good agreement with measured height and no significant differences were found between the mean values of predicted and measured heights in either gender (p>0.05). However, the heights predicted from previous published adult-derived demi-span equations failed to yield good agreement with the measured height of the elderly; significant over-estimation and underestimation of heights tended to occur (p>0.05). The new demi-span equations allow prediction of height with sufficient accuracy in the Malaysian elderly. However, further validation on other elderly samples is needed. Also, we recommend caution when using adult-derived demi-span equations to predict height in elderly people.

Markers of Bone Metabolism Are Affected by Renal Function and Growth Hormone Therapy in Children with Chronic Kidney Disease

PubMed Central

Doyon, Anke; Fischer, Dagmar-Christiane; Bayazit, Aysun Karabay; Canpolat, Nur; Duzova, Ali; Sözeri, Betül; Bacchetta, Justine; Balat, Ayse; Büscher, Anja; Candan, Cengiz; Cakar, Nilgun; Donmez, Osman; Dusek, Jiri; Heckel, Martina; Klaus, Günter; Mir, Sevgi; Özcelik, Gül; Sever, Lale; Shroff, Rukshana; Vidal, Enrico; Wühl, Elke; Gondan, Matthias; Melk, Anette; Querfeld, Uwe; Haffner, Dieter; Schaefer, Franz

2015-01-01

Objectives The extent and relevance of altered bone metabolism for statural growth in children with chronic kidney disease is controversial. We analyzed the impact of renal dysfunction and recombinant growth hormone therapy on a panel of serum markers of bone metabolism in a large pediatric chronic kidney disease cohort. Methods Bone alkaline phosphatase (BAP), tartrate-resistant acid phosphatase 5b (TRAP5b), sclerostin and C-terminal FGF-23 (cFGF23) normalized for age and sex were analyzed in 556 children aged 6–18 years with an estimated glomerular filtration rate (eGFR) of 10–60 ml/min/1.73m2. 41 children receiving recombinant growth hormone therapy were compared to an untreated matched control group. Results Standardized levels of BAP, TRAP5b and cFGF-23 were increased whereas sclerostin was reduced. BAP was correlated positively and cFGF-23 inversely with eGFR. Intact serum parathormone was an independent positive predictor of BAP and TRAP5b and negatively associated with sclerostin. BAP and TRAP5B were negatively affected by increased C-reactive protein levels. In children receiving recombinant growth hormone, BAP was higher and TRAP5b lower than in untreated controls. Sclerostin levels were in the normal range and higher than in untreated controls. Serum sclerostin and cFGF-23 independently predicted height standard deviation score, and BAP and TRAP5b the prospective change in height standard deviation score. Conclusion Markers of bone metabolism indicate a high-bone turnover state in children with chronic kidney disease. Growth hormone induces an osteoanabolic pattern and normalizes osteocyte activity. The osteocyte markers cFGF23 and sclerostin are associated with standardized height, and the markers of bone turnover predict height velocity. PMID:25659076

The effect of equalizing landing task demands on sex differences in lower extremity energy absorption.

PubMed

Montgomery, Melissa M; Shultz, Sandra J; Schmitz, Randy J

2014-08-01

Less lean mass and strength may result in greater relative task demands on females compared to males when landing from a standardized height and could explain sex differences in energy absorption strategies. We compared the magnitude of sex differences in energy absorption when task demands were equalized relative to the amount of lower extremity lean mass available to dissipate kinetic energy upon landing. Male-female pairs (n=35) were assessed for lower extremity lean mass with dual-energy X-ray absorptiometry. Relative task demands were calculated when landing from a standardized height. Based on the difference in lower extremity lean mass within each pair, task demands were equalized by increasing the drop height for males. Joint energetics were measured while landing from the two heights. Multivariate repeated measures ANOVAs compared the magnitude of sex differences in joint energetics between conditions. The multivariate test for absolute energy absorption was significant (P<0.01). The magnitude of sex difference in energy absorption was greater at the hip and knee (both P<0.01), but not the ankle (P=0.43) during the equalized condition compared to the standardized and exaggerated conditions (all P<0.01). There was no difference in the magnitude of sex differences between equalized, standardized and exaggerated conditions for relative energy absorption (P=0.18). Equalizing task demands increased the difference in absolute hip and knee energy absorption between sexes, but had no effect on relative joint contributions to total energy absorption. Sex differences in energy absorption are likely influenced by factors other than differences in relative task demands. Copyright © 2014 Elsevier Ltd. All rights reserved.

Anthropometry as a tool for measuring malnutrition: impact of the new WHO growth standards and reference.

PubMed

Duggan, M B

2010-01-01

Anthropometry is a useful tool, both for monitoring growth and for nutritional assessment. The publication by WHO of internationally agreed growth standards in 1983 facilitated comparative nutritional assessment and the grading of childhood malnutrition. New growth standards for children under 5 years and growth reference for children aged 5-19 years have recently (2006 and 2007) been published by WHO. Growth of children <5 years was recorded in a multi-centre growth reference study involving children from six countries, selected for optimal child-rearing practices (breastfeeding, non-smoking mothers). They therefore constitute a growth standard. Growth data for older children were drawn from existing US studies, and upward skewing was avoided by excluding overweight subjects. These constitute a reference. More indicators are now included to describe optimal early childhood growth and development, e.g. BMI for age and MUAC for age. The growth reference for older children (2007) focuses on linear growth and BMI; weight-for-age data are age-limited and weight-for-height is omitted. Differences in the 2006 growth pattern from the previous reference for children <5 are attributed to differences in infant feeding. The 2006 'reference infant' is at first heavier and taller than his/her 1983 counterpart, but is then lighter until the age of 5. Being taller in the 2nd year, he/she is less bulky (lighter for height) than the 1983 reference toddler. The spread of values for height and weight for height is narrower in the 2006 dataset, such that the lower limit of the normal range for both indices is set higher than in the previous dataset. This means that a child will be identified as moderately or severely underweight for height (severe acute malnutrition) at a greater weight for height than previously. The implications for services for malnourished children have been recognised and strategies devised. The emphasis on BMI-for-age as the indicator for thinness and obesity in older children is discussed. The complexity of calculations for health cadres without mathematical backgrounds or access to calculation software is also an issue. It is possible that the required charts and tables may not be accessible to those working in traditional health/nutrition services which are often poorly equipped.

Research study on neutral thermodynamic atmospheric model. [for space shuttle mission and abort trajectory

NASA Technical Reports Server (NTRS)

Hargraves, W. R.; Delulio, E. B.; Justus, C. G.

1977-01-01

The Global Reference Atmospheric Model is used along with the revised perturbation statistics to evaluate and computer graph various atmospheric statistics along a space shuttle reference mission and abort trajectory. The trajectory plots are height vs. ground range, with height from ground level to 155 km and ground range along the reentry trajectory. Cross sectional plots, height vs. latitude or longitude, are also generated for 80 deg longitude, with heights from 30 km to 90 km and latitude from -90 deg to +90 deg, and for 45 deg latitude, with heights from 30 km to 90 km and longitudes from 180 deg E to 180 deg W. The variables plotted are monthly average pressure, density, temperature, wind components, and wind speed and standard deviations and 99th inter-percentile range for each of these variables.

Anthropometry and somatotypes of competitive DanceSport participants: a comparison of three different styles.

PubMed

Liiv, H; Wyon, M; Jürimäe, T; Purge, P; Saar, M; Mäestu, J; Jürimäe, J

2014-04-01

Anthropometry in dance and aesthetic sports has been shown to play an important role in selection and performance criteria. The aim of the present study was to examine variations in somatotype and anthropometry in three different competitive dance styles: DanceSport Standard, Latin American and Ten Dance. Anthropometry and somatotype data were collected from thirty couples competing in Standard (n=24 individuals), Latin American (n=14) and Ten Dance (n=22) styles. A single tester (ISAK Level 1) carried out all anthropometric measurements using the Heath-Carter protocol and somatotypes were calculated using the Heath-Carter's decimal equations. Results indicated that the mean somatotype for the male dancers was 2.4-3.9-3.2, whilst for females it was 2.7-2.7-3.5. Factorial analysis reported Standard dancers scored significantly higher for ectomorphy, sitting height and arm span than Latin dancers (p<0.05). Correlation analysis with the Standard dancer's International Ranking highlighted moderate positive correlation with mesomorphy (r=0.434, p<0.05) and negative correlation with ectomorphy (r=-0.546, p<0.001). The findings of this study show that somatotypes differ among DanceSport participants by dance style. Compared with other aesthetic sports, male and female dancers were less mesomorphic and more ectomorphic. Standard dancers tend to be more ectomorphic with greater height, longer arm span and greater sitting height compared with Latin American dancers. Although Standard dancers were ectomorphic, those dancers who had higher mesomorphic ranking had higher places in the dancers' international ranking. Copyright © 2013 Elsevier GmbH. All rights reserved.

Growth charts for non-growth hormone treated Prader-Willi syndrome.

PubMed

Butler, Merlin G; Lee, Jaehoon; Manzardo, Ann M; Gold, June-Anne; Miller, Jennifer L; Kimonis, Virginia; Driscoll, Daniel J

2015-01-01

The goal of this study was to generate and report standardized growth curves for weight, height, head circumference, and BMI for non-growth hormone-treated white male and female US subjects with Prader-Willi syndrome (PWS) between 3 and 18 years of age and develop standardized growth charts. Anthropometric measures (N = 133) were obtained according to standard methods from 120 non-growth hormone-treated white subjects (63 males and 57 females) with PWS between 3 and 18 years of age. Standardized growth curves were developed for the third, 10th, 25th, 50th, 75th, 90th, and 97th percentiles by using the LMS method for weight, height, head circumference, and BMI for PWS subjects along with the normative third, 50th, and 97th percentiles from national and international growth data. The LMS smoothing procedure summarized the distribution of the anthropometric variables at each age using three parameters: power of the Box-Cox transformation λ (L), median μ (M) and coefficient of variation δ (S). Weight, height, head circumference, and BMI standardized growth charts representing 7 percentile ranges were developed from 120 non-growth hormone-treated white male and female US subjects with PWS (age range: 3-18 years) and normative third, 50th, and 97th percentiles from national and international data. We encourage the use of syndrome-specific growth standards to examine and evaluate subjects with PWS when monitoring growth patterns and determining nutritional and obesity status. These variables can be influenced by culture, individual medical care, diet intervention, and physical activity plans. Copyright © 2015 by the American Academy of Pediatrics.

Consistency evaluation of values of weight, height, and body mass index in Food Intake and Physical Activity of School Children: the quality control of data entry in the computerized system.

PubMed

Jesus, Gilmar Mercês de; Assis, Maria Alice Altenburg de; Kupek, Emil; Dias, Lizziane Andrade

2017-01-01

The quality control of data entry in computerized questionnaires is an important step in the validation of new instruments. The study assessed the consistency of recorded weight and height on the Food Intake and Physical Activity of School Children (Web-CAAFE) between repeated measures and against directly measured data. Students from the 2nd to the 5th grade (n = 390) had their weight and height directly measured and then filled out the Web-CAAFE. A subsample (n = 92) filled out the Web-CAAFE twice, three hours apart. The analysis included hierarchical linear regression, mixed linear regression model, to evaluate the bias, and intraclass correlation coefficient (ICC), to assess consistency. Univariate linear regression assessed the effect of gender, reading/writing performance, and computer/internet use and possession on residuals of fixed and random effects. The Web-CAAFE showed high values of ICC between repeated measures (body weight = 0.996, height = 0.937, body mass index - BMI = 0.972), and regarding the checked measures (body weight = 0.962, height = 0.882, BMI = 0.828). The difference between means of body weight, height, and BMI directly measured and recorded was 208 g, -2 mm, and 0.238 kg/m², respectively, indicating slight BMI underestimation due to underestimation of weight and overestimation of height. This trend was related to body weight and age. Height and weight data entered in the Web-CAAFE by children were highly correlated with direct measurements and with the repeated entry. The bias found was similar to validation studies of self-reported weight and height in comparison to direct measurements.

A mid-latitude ozone model for the 1976 U.S. standard atmosphere

NASA Technical Reports Server (NTRS)

Krueger, A. J.; Minzner, R. A.

1976-01-01

A mid-latitude northern hemisphere model of the daytime ozone distribution in the troposphere, stratosphere, and lower mesosphere has been constructed. Data from rocket soundings in the latitude range of 45 deg N + or - 15 deg N, results of balloon soundings at latitudes from 41 to 47 deg N, and latitude gradients from satellite ozone observations have been combined to produce estimates of the annual mean ozone concentration and its variability at heights up to 74 km for an effective latitude of 45 deg N. This model is a revision for heights above 26 km of the tentative mid-latitude ozone model, included in the U.S. Standard Atmosphere Supplements, 1966, and has been adopted for use in the U.S. Standard Atmosphere, 1976.

Construction of a New Growth References for China Based on Urban Chinese Children: Comparison with the WHO Growth Standards

PubMed Central

Zong, Xin-Nan; Li, Hui

2013-01-01

Introduction Growth references for Chinese children should be updated due to the positive secular growth trends and the progress of the smoothing techniques. Human growth differs among the various ethnic groups, so comparison of the China references with the WHO standards helps to understand such differences. Methods The China references, including weight, length/height, head circumference, weight-for-length/height and body mass index (BMI) aged 0–18 years, were constructed based on 69,760 urban infants and preschool children under 7 years and 24,542 urban school children aged 6–20 years derived from two cross-sectional national surveys. The Cole’s LMS method is employed for smoothing the growth curves. Results The merged data sets resulted in a smooth transition at age 6–7 years and continuity of curves from 0 to 18 years. Varying differences were found on the empirical standard deviation (SD) curves in each indicator at nearly all ages between China and WHO. The most noticeable differences occurred in genders, final height and boundary centiles curves. Chinese boys’ weight is strikingly heavier than that of the WHO at age 6–10 years. The height is taller than that of the WHO for boys below 15 years and for girls below 13, but is significantly lower when boys over 15 years and girls over 13. BMI is generally higher than that of the WHO for boys at age 6–16 years but appreciably lower for girls at 3–18 years. Conclusions The differences between China and WHO are mainly caused by the reference populations of different ethnic backgrounds. For practitioners, the choices of the standards/references depend on the population to be assessed and the purpose of the study. The new China references could be applied to facilitate the standardization assessment of growth and nutrition for Chinese children and adolescents in clinical pediatric and public health. PMID:23527219

Predicting vertical jump height from bar velocity.

PubMed

García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

2015-06-01

The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s(-2)). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r(2) = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r(2) = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key pointsVertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer.The relationship between the point at which bar acceleration is less than -9.81 m·s(-2) and the real take-off is affected by the velocity of movement.Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance.

Predicting Vertical Jump Height from Bar Velocity

PubMed Central

García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

2015-01-01

The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s-2). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r2 = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r2 = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key points Vertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer. The relationship between the point at which bar acceleration is less than -9.81 m·s-2 and the real take-off is affected by the velocity of movement. Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance. PMID:25983572

The GLAS Standard Data Products Specification--Level 2, Version 9. Volume 14

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.

2013-01-01

The Geoscience Laser Altimeter System (GLAS) is the primary instrument for the ICESat (Ice, Cloud and Land Elevation Satellite) laser altimetry mission. ICESat was the benchmark Earth Observing System (EOS) mission for measuring ice sheet mass balance, cloud and aerosol heights, as well as land topography and vegetation characteristics. From 2003 to 2009, the ICESat mission provided multi-year elevation data needed to determine ice sheet mass balance as well as cloud property information, especially for stratospheric clouds common over polar areas. It also provided topography and vegetation data around the globe, in addition to the polar-specific coverage over the Greenland and Antarctic ice sheets.This document defines the Level-2 GLAS standard data products. This document addresses the data flow, interfaces, record and data formats associated with the GLAS Level 2 standard data products. The term standard data products refers to those EOS instrument data that are routinely generated for public distribution. The National Snow and Ice Data Center (NSDIC) distribute these products. Each data product has a unique Product Identification code assigned by the Senior Project Scientist. The Level 2 Standard Data Products specifically include those derived geophysical data values (i.e., ice sheet elevation, cloud height, vegetation height, etc.). Additionally, the appropriate correction elements used to transform the Level 1A and Level 1B Data Products into Level 2 Data Products are included. The data are packaged with time tags, precision orbit location coordinates, and data quality and usage flags.

[Variation pattern and its affecting factors of three-dimensional landscape in urban residential community of Shenyang].

PubMed

Zhang, Pei-Feng; Hu, Yuan-Man; Xiong, Zai-Ping; Liu, Miao

2011-02-01

Based on the 1:10000 aerial photo in 1997 and the three QuickBird images in 2002, 2005, and 2008, and by using Barista software and GIS and RS techniques, the three-dimensional information of the residential community in Tiexi District of Shenyang was extracted, and the variation pattern of the three-dimensional landscape in the district during its reconstruction in 1997-2008 and related affecting factors were analyzed with the indices, ie. road density, greening rate, average building height, building height standard deviation, building coverage rate, floor area rate, building shape coefficient, population density, and per capita GDP. The results showed that in 1997-2008, the building area for industry decreased, that for commerce and other public affairs increased, and the area for residents, education, and medical cares basically remained stable. The building number, building coverage rate, and building shape coefficient decreased, while the floor area rate, average building height, height standard deviation, road density, and greening rate increased. Within the limited space of residential community, the containing capacity of population and economic activity increased, and the environment quality also improved to some extent. The variation degree of average building height increased, but the building energy consumption decreased. Population growth and economic development had positive correlations with floor area rate, road density, and greening rate, but negative correlation with building coverage rate.

[Final size attained in type 1 diabetes children].

PubMed

Galera Martínez, R; García García, E; Gámez Gómez, M D; Gómez Llorente, J L; Garrido Fernández, P; Bonillo Perales, A

2009-03-01

To describe the final height and height-gain in relation to target height, in children with type 1 diabetes mellitus, and analyse their relationship to different variables. Retrospective analysis of the growth data of 52 children (27 girls) diagnosed with type 1 diabetes mellitus before 14 years old, and followed up until their final height was attained. final height, target height, illness duration, glycated haemoglobin (HbA1c), insulin dose, BMI, and other autoimmune diseases. The height SDS (standard deviation scale) at diagnosis was slightly higher (0.734 in boys and 0.563 in girls). During the development of the disease, a growth reduction was seen, which was significantly higher in boys of prepubertal age (p = 0.016). The mean final height attained was 173.14 +/- 5.28 cm in boys and 161.9 +/- 6.97 cm in girls. Height gain was 1.56 +/- 3.66 in boys (SDS = -0.034) and 2.26 +/- 6.13 in girls (SDS = 0.385). The only variable significantly related to height gain was mean glycated-haemoglobin (growth reduction of 2 cm for every increment of 1% in mean glycated-haemoglobin). At onset, diabetic children were slightly taller than the general population. A growth reduction was shown as the disease developed, significantly higher in boys of prepubertal age. The final height in boys was slightly lower than the mean, but in girls was similar to the general population. Both sexes attained their target height, although the height gain was less in boys. Poorer metabolic control was associated with reduced height gain.

Are Human Mating Preferences with Respect to Height Reflected in Actual Pairings?

PubMed Central

Stulp, Gert; Buunk, Abraham P.; Pollet, Thomas V.; Nettle, Daniel; Verhulst, Simon

2013-01-01

Pair formation, acquiring a mate to form a reproductive unit, is a complex process. Mating preferences are a step in this process. However, due to constraining factors such as availability of mates, rival competition, and mutual mate choice, preferred characteristics may not be realised in the actual partner. People value height in their partner and we investigated to what extent preferences for height are realised in actual couples. We used data from the Millennium Cohort Study (UK) and compared the distribution of height difference in actual couples to simulations of random mating to test how established mate preferences map on to actual mating patterns. In line with mate preferences, we found evidence for: (i) assortative mating (r = .18), (ii) the male-taller norm, and, for the first time, (iii) for the male-not-too-tall norm. Couples where the male partner was shorter, or over 25 cm taller than the female partner, occurred at lower frequency in actual couples than expected by chance, but the magnitude of these effects was modest. We also investigated another preference rule, namely that short women (and tall men) prefer large height differences with their partner, whereas tall women (and short men) prefer small height differences. These patterns were also observed in our population, although the strengths of these associations were weaker than previously reported strength of preferences. We conclude that while preferences for partner height generally translate into actual pairing, they do so only modestly. PMID:23342102

Are human mating preferences with respect to height reflected in actual pairings?

PubMed

Stulp, Gert; Buunk, Abraham P; Pollet, Thomas V; Nettle, Daniel; Verhulst, Simon

2013-01-01

Pair formation, acquiring a mate to form a reproductive unit, is a complex process. Mating preferences are a step in this process. However, due to constraining factors such as availability of mates, rival competition, and mutual mate choice, preferred characteristics may not be realised in the actual partner. People value height in their partner and we investigated to what extent preferences for height are realised in actual couples. We used data from the Millennium Cohort Study (UK) and compared the distribution of height difference in actual couples to simulations of random mating to test how established mate preferences map on to actual mating patterns. In line with mate preferences, we found evidence for: (i) assortative mating (r = .18), (ii) the male-taller norm, and, for the first time, (iii) for the male-not-too-tall norm. Couples where the male partner was shorter, or over 25 cm taller than the female partner, occurred at lower frequency in actual couples than expected by chance, but the magnitude of these effects was modest. We also investigated another preference rule, namely that short women (and tall men) prefer large height differences with their partner, whereas tall women (and short men) prefer small height differences. These patterns were also observed in our population, although the strengths of these associations were weaker than previously reported strength of preferences. We conclude that while preferences for partner height generally translate into actual pairing, they do so only modestly.

The Body Composition of a College Football Team.

ERIC Educational Resources Information Center

Wickkiser, John D.; Kelly, John M.

This study focuses on the body composition and anthropometric measurements of 65 college football players. Body composition was determined by underwater weighing with an accurate assessment of residual volume. The anthropometric measurements included height, weight, seven skinfolds, waist circumference, and wrist diameter. A step-wise multiple…

76 FR 76217 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-06

... petition, as well as any written communications concerning the petition, is available for review online at...)(3) based on the specific method used to measure the sill step relationship to the platform height... request. All communications concerning these proceedings should identify the appropriate docket number and...

Child size and household characteristics in rural Timor-Leste.

PubMed

Reghupathy, Nadine; Judge, Debra S; Sanders, Katherine A; Amaral, Pedro Canisio; Schmitt, Lincoln H

2012-01-01

The main objective was to determine those characteristics of the family and household that affects child health (as measured by child size for age) in the rural Ossu area of Timor-Leste. Interviews of parents in 102 households assessed reproductive histories, the amount and type of resources available and family composition (number, sex, and age of members). Height, weight, and mid-upper arm circumference were measured for all children in the household. To standardize for age and sex, raw measures were transformed into WHO Z scores and compared across households. Children were low in both height and weight relative to international standards and older children compared with international standards more poorly than under-fives. There was no evidence of sex difference in relative growth. The number of children in a household was negatively associated with height but not weight and positively with BMI. Children living in the villages more distant from Ossu town center had significantly lower Z scores for height than children in town. No crop or livestock indices were related to growth. Fostered children did not show growth different from biological children, but biological children in households with fostered children were slightly larger for age. Short stature inflates BMI and harvest season measures may have captured short-term increases in children's energy balance. Social networks may increase child well-being by moving children toward resource richer households. Social and cultural factors influence resource allocations among children and their health in rural Timor-Leste. 2011 Wiley Periodicals, Inc.

Height of a faceted macrostep for sticky steps in a step-faceting zone

NASA Astrophysics Data System (ADS)

Akutsu, Noriko

2018-02-01

The driving force dependence of the surface velocity and the average height of faceted merged steps, the terrace-surface slope, and the elementary step velocity are studied using the Monte Carlo method in the nonequilibrium steady state. The Monte Carlo study is based on a lattice model, the restricted solid-on-solid model with point-contact-type step-step attraction (p-RSOS model). The main focus of this paper is a change of the "kink density" on the vicinal surface. The temperature is selected to be in the step-faceting zone [N. Akutsu, AIP Adv. 6, 035301 (2016), 10.1063/1.4943400] where the vicinal surface is surrounded by the (001) terrace and the (111) faceted step at equilibrium. Long time simulations are performed at this temperature to obtain steady states for the different driving forces that influence the growth/recession of the surface. A Wulff figure of the p-RSOS model is produced through the anomalous surface tension calculated using the density-matrix renormalization group method. The characteristics of the faceted macrostep profile at equilibrium are classified with respect to the connectivity of the surface tension. This surface tension connectivity also leads to a faceting diagram, where the separated areas are, respectively, classified as a Gruber-Mullins-Pokrovsky-Talapov zone, step droplet zone, and step-faceting zone. Although the p-RSOS model is a simplified model, the model shows a wide variety of dynamics in the step-faceting zone. There are four characteristic driving forces: Δ μy,Δ μf,Δ μc o , and Δ μR . For the absolute value of the driving force, |Δ μ | is smaller than Max[ Δ μy,Δ μf] , the step attachment-detachments are inhibited, and the vicinal surface consists of (001) terraces and the (111) side surfaces of the faceted macrosteps. For Max[ Δ μy,Δ μf]<|Δ μ |<Δ μc o , the surface grows/recedes intermittently through the two-dimensional (2D) heterogeneous nucleation at the facet edge of the macrostep. For Δ μc o<|Δ μ | <Δ μR , the surface grows/recedes with the successive attachment-detachment of steps to/from a macrostep. When |Δ μ | exceeds Δ μR , the macrostep vanishes and the surface roughens kinetically. Classical 2D heterogeneous multinucleation was determined to be valid with slight modifications based on the Monte Carlo results of the step velocity and the change in the surface slope of the "terrace." The finite-size effects were also determined to be distinctive near equilibrium.

Frames of reference in action plan recall: influence of hand and handedness.

PubMed

Seegelke, Christian; Hughes, Charmayne M L; Wunsch, Kathrin; van der Wel, Robrecht; Weigelt, Matthias

2015-10-01

Evidence suggests that people are more likely to recall features of previous plans and use them for subsequent movements, rather than generating action plans from scratch for each movement. The information used for plan recall during object manipulation tasks is stored in extrinsic (object-centered) rather than intrinsic (body-centered) coordinates. The present study examined whether action plan recall processes are influenced by manual asymmetries. Right-handed (Experiment 1) and left-handed (Experiment 2) participants grasped a plunger from a home position using either the dominant or the non-dominant hand and placed it at one of the three target positions located at varying heights (home-to-target moves). Subsequently, they stepped sideways down from a podium (step-down podium), onto a podium (step-up podium), or without any podium present (no podium), before returning the plunger to the home platform using the same hand (target-back-to-home moves). The data show that, regardless of hand and handedness, participants grasped the plunger at similar heights during the home-to-target and target-back-to-home moves, even if they had to adopt quite different arm postures to do so. Thus, these findings indicate that the information used for plan recall processes in sequential object manipulation tasks is stored in extrinsic coordinates and in an effector-independent manner.

Growth habit and surface morphology of L-arginine phosphate monohydrate single crystals

NASA Astrophysics Data System (ADS)

Sangwal, K.; Veintemillas-Verdaguer, S.; Torrent-Burgués, J.

1995-10-01

The results of a study of the growth habit and the surface topography of L-arginine phosphate monohydrate (LAP) single crystals as a function of supersaturation are described and discussed. Apart from a change in the growth habit with supersaturation, it was observed that most of the as-grown faces of LAP exhibit isolated growth hillocks and macrohillocks and parallel bunched layers and that the formation of bunched layers is pronounced on faces showing macrohillocks. Observations of bunching of growth layers emitted by macrohillocks on the {100} faces revealed that, for the onset of bunching close to a macrospiral, there is a characteristic threshold distance whose value depends on the interstep distance and supersaturation, but is independent of step height. The theoretical habit of LAP deduced from PBC analysis showed that all faces exhibiting growth hillocks and macrohillocks are F faces. Analysis of the results on bunch formation revealed that growth of LAP takes place by the direct integration of growth entities at the growth steps, that the bunching is facilitated by an increasing value of the activation energy for their integration, and that the observed dependencies of threshold distance on interstep distance, supersaturation and step height are qualitatively in agreement with van der Eerden and Müller-Krumbhaar's theory of bunch formation.

Response to long-term growth hormone therapy in patients affected by RASopathies and growth hormone deficiency: Patterns of growth, puberty and final height data.

PubMed

Tamburrino, Federica; Gibertoni, Dino; Rossi, Cesare; Scarano, Emanuela; Perri, Annamaria; Montanari, Francesca; Fantini, Maria Pia; Pession, Andrea; Tartaglia, Marco; Mazzanti, Laura

2015-11-01

RASopathies are developmental disorders caused by heterozygous germline mutations in genes encoding proteins in the RAS-MAPK signaling pathway. Reduced growth is a common feature. Several studies generated data on growth, final height (FH), and height velocity (HV) after growth hormone (GH) treatment in patients with these disorders, particularly in Noonan syndrome, the most common RASopathy. These studies, however, refer to heterogeneous cohorts in terms of molecular information, GH status, age at start and length of therapy, and GH dosage. This work reports growth data in 88 patients affected by RASopathies with molecularly confirmed diagnosis, together with statistics on body proportions, pubertal pattern, and FH in 33, including 16 treated with GH therapy for proven GH deficiency. Thirty-three patients showed GH deficiency after pharmacological tests, and were GH-treated for an average period of 6.8 ± 4.8 years. Before starting therapy, HV was -2.6 ± 1.3 SDS, and mean basal IGF1 levels were -2.0 ± 1.1 SDS. Long-term GH therapy, starting early during childhood, resulted in a positive height response compared with untreated patients (1.3 SDS in terms of height-gain), normalizing FH for Ranke standards but not for general population and Target Height. Pubertal timing negatively affected pubertal growth spurt and FH, with IGF1 standardized score increased from -2.43 to -0.27 SDS. During GH treatment, no significant change in bone age velocity, body proportions, or cardiovascular function was observed. © 2015 Wiley Periodicals, Inc.

Establishment of a new relationship between posed smile width and lower facial height: A cross-sectional study

PubMed Central

Abraham, Aby; George, Jinu; Peter, Elbe; Philip, Koshi; Chankramath, Rajesh; Johns, Dexton Antony; Bhaskar, Anitha

2015-01-01

Objective: The present study is intended to add a new parameter that would be useful in orthodontic clinical evaluation, treatment planning, and determination of vertical dimension (at occlusion). Materials and Methods: Standardized videographic recording of 79 subjects during posed smile was captured. Each video was then cut into 30 photos using the free studio software. The widest commissure-to-commissure posed smile frame (posed smile width [SW]) was selected as one of 10 or more frames showing an identical smile. Lower third of the face is measured from subnasale to soft tissue menton using a digital vernier caliper. Two values were then compared. Ratio between lower facial height and posed SW was calculated. Results: The co-relation between smiling width and lower facial height was found to be statistically significant (P < 0.01). The ratio of lower facial height and smiling width was calculated as 1.0016 with a standard deviation (SD) = 0.04 in males and 1.0301 with an SD = 0.07 in females. The difference between the mean lower facial height in males and females was statistically significant with a t = 10.231 and P = 0.000. The difference between the mean smiling width in males and females was also statistically significant with a t = 5.653 and P = 0.000. Conclusion: In class I subjects with pleasing appearance, normal facial proportions, normal overjet and overbite, and average Frankfort mandibular angle, the lower facial height (subnasale to soft tissue menton) is equal to posed SW. PMID:26430369

Increasing variability of body mass and health correlates in Swiss conscripts, a possible role of relaxed natural selection?

PubMed Central

Staub, Kaspar; Henneberg, Maciej; Galassi, Francesco M; Eppenberger, Patrick; Haeusler, Martin; Morozova, Irina; Rühli, Frank J; Bender, Nicole

2018-01-01

Abstract Background and objectives The body mass index (BMI) is an established anthropometric index for the development of obesity-related conditions. However, little is known about the distribution of BMI within a population, especially about this distribution’s temporal change. Here, we analysed changes in the distribution of height, weight and BMI over the past 140 years based on data of Swiss conscripts and tested for correlations between anthropometric data and standard blood parameters. Methods Height and weight were measured in 59 504 young Swiss males aged 18–19 years during conscription in 1875–79, 1932–36, 1994 and 2010–12. For 65% of conscripts in 2010–12, results of standard blood analysis were available. We calculated descriptive statistics of the distribution of height, weight and BMI over the four time periods and tested for associations between BMI and metabolic parameters. Results Average and median body height, body weight and BMI increased over time. Height did no longer increase between 1994 and 2010–12, while weight and BMI still increased over these two decades. Variability ranges of weight and BMI increased over time, while variation of body height remained constant. Elevated levels of metabolic and inflammatory blood parameters were found at both ends of BMI distribution. Conclusions and implications Both overweight and underweight subgroups showed similar changes in inflammation parameters, pointing toward related metabolic deficiencies in both conditions. In addition to environmental influences, our results indicate a potential role of relaxed natural selection on genes affecting metabolism and body composition.

Postdischarge growth assessment in very low birth weight infants.

PubMed

Park, Joon-Sik; Han, Jungho; Shin, Jeong Eun; Lee, Soon Min; Eun, Ho Seon; Park, Min-Soo; Park, Kook-In; Namgung, Ran

2017-03-01

The goal of nutritional support for very-low-birth-weight (VLBW) infants from birth to term is to match the in utero growth rates; however, this is rarely achieved. We evaluated postdischarge growth patterns and growth failure in 81 Korean VLBW infants through a retrospective study. Weight and height were measured and calculated based on age percentile distribution every 3 months until age 24 months. Growth failure was defined as weight and height below the 10th percentile at 24 months. For the subgroup analysis, small-for-gestational age (SGA) and extremely low birth weight (ELBW) infants were evaluated. The growth patterns based on the Korean, World Health Organization (WHO), or Centers for Disease Control and Prevention (CDC) standard were serially compared over time. At postconception age (PCA) 40 weeks, 47 (58%) and 45 infants (55%) showed growth failure in terms of weight and height, respectively. At PCA 24 months, 20 infants (24%) showed growth failure for weight and 14 (18%) for height. Growth failure rates were higher for the SGA infants than for the appropriate-weight-for-gestational age infants at PCA 24 months ( P =0.045 for weight and P =0.038 for height). Growth failure rates were higher for the ELBW infants than for the non-ELBW infants at PCA 24 months ( P <0.001 for weight and P =0.003 for height). Significant differences were found among the WHO, CDC, and Korean standards ( P <0.001). Advancements in neonatal care have improved the catch-up growth of VLBW infants, but this is insufficient. Careful observation and aggressive interventions, especially in SGA and ELBW infants, are needed.

Should short children born small for gestational age with a distance to target height <1 standard deviation score be excluded from growth hormone treatment?

PubMed

Lem, Annemieke J; de Kort, Sandra W K; de Ridder, Maria A J; Hokken-Koelega, Anita C S

2010-09-01

The criteria for starting growth hormone (GH), an approved treatment for short children born small for gestational age (SGA), differ between Europe and the USA. One European requirement for starting GH, a distance to target height (DTH) of > or =1 standard deviation score (SDS), is controversial. To investigate the influence of DTH on growth during GH treatment in short SGA children and to ascertain whether it is correct to exclude children with a DTH <1 SDS from GH. A large group of short prepubertal SGA children (baseline n = 446; 4 years GH n = 215). We analysed the prepubertal growth response during 4 years of GH. We investigated the influence of the continuous variable DTH SDS on growth response and a possible DTH SDS cut-off level below which point the growth response is insufficient. Height gain SDS during 4 years of GH showed a wide variation at every DTH SDS level. Multiple regression analyses demonstrated that, after correction for other significant variables, an additional DTH of 1 SDS resulted in 0.13 SDS more height gain during 4 years of GH. We found no significant differences in height gain below and above certain DTH SDS cut-off levels. DTH SDS had a weak positive effect on height gain during 4 years of GH, while several other determinants had much larger effects. We found no support for using any DTH cut-off level. Based on our data, excluding children with a DTH <1 SDS from GH treatment is not justified.

Growth hormone positive effects on craniofacial complex in Turner syndrome.

PubMed

Juloski, Jovana; Dumančić, Jelena; Šćepan, Ivana; Lauc, Tomislav; Milašin, Jelena; Kaić, Zvonimir; Dumić, Miroslav; Babić, Marko

2016-11-01

Turner syndrome occurs in phenotypic females with complete or partial absence of X chromosome. The leading symptom is short stature, while numerous but mild stigmata manifest in the craniofacial region. These patients are commonly treated with growth hormone to improve their final height. The aim of this study was to assess the influence of long-term growth hormone therapy on craniofacial morphology in Turner syndrome patients. In this cross-sectional study cephalometric analysis was performed on 13 lateral cephalograms of patients with 45,X karyotype and the average age of 17.3 years, who have received growth hormone for at least two years. The control group consisted of 13 Turner syndrome patients naive to growth hormone treatment, matched to study group by age and karyotype. Sixteen linear and angular measurements were obtained from standard lateral cephalograms. Standard deviation scores were calculated in order to evaluate influence of growth hormone therapy on craniofacial components. In Turner syndrome patients treated with growth hormone most of linear measurements were significantly larger compared to untreated patients. Growth hormone therapy mainly influenced posterior face height, mandibular ramus height, total mandibular length, anterior face height and maxillary length. While the increase in linear measurements was evident, angular measurements and facial height ratio did not show statistically significant difference. Acromegalic features were not found. Long-term growth hormone therapy has positive influence on craniofacial development in Turner syndrome patients, with the greatest impact on posterior facial height and mandibular ramus. However, it could not compensate X chromosome deficiency and normalize craniofacial features. Copyright © 2016 Elsevier Ltd. All rights reserved.

Spectrally resolved chromatic confocal interferometry for one-shot nano-scale surface profilometry with several tens of micrometric depth range

NASA Astrophysics Data System (ADS)

Chen, Liang-Chia; Chen, Yi-Shiuan; Chang, Yi-Wei; Lin, Shyh-Tsong; Yeh, Sheng Lih

2013-01-01

In this research, new nano-scale measurement methodology based on spectrally-resolved chromatic confocal interferometry (SRCCI) was successfully developed by employing integration of chromatic confocal sectioning and spectrally-resolve white light interferometry (SRWLI) for microscopic three dimensional surface profilometry. The proposed chromatic confocal method (CCM) using a broad band while light in combination with a specially designed chromatic dispersion objective is capable of simultaneously acquiring multiple images at a large range of object depths to perform surface 3-D reconstruction by single image shot without vertical scanning and correspondingly achieving a high measurement depth range up to hundreds of micrometers. A Linnik-type interferometric configuration based on spectrally resolved white light interferometry is developed and integrated with the CCM to simultaneously achieve nanoscale axis resolution for the detection point. The white-light interferograms acquired at the exit plane of the spectrometer possess a continuous variation of wavelength along the chromaticity axis, in which the light intensity reaches to its peak when the optical path difference equals to zero between two optical arms. To examine the measurement accuracy of the developed system, a pre-calibrated accurate step height target with a total step height of 10.10 μm was measured. The experimental result shows that the maximum measurement error was verified to be less than 0.3% of the overall measuring height.

Establishing the Baseline Height and Weight Status of New Hampshire Head Start Children, 2007-2008

ERIC Educational Resources Information Center

Blaney, David D.; Flynn, Regina T.; Martin, Nancy R.; Anderson, Ludmila

2010-01-01

We report on a standardized survey of height and weight status of children attending the New Hampshire Head Start Program during the 2007-2008 school year. Baseline prevalence estimates of overweight and obesity are needed for obesity prevention activities and intervention. We selected a random one-stage cluster sample and screened 629 children…

Analysis of the most relevant anthropometric dimensions for school furniture selection based on a study with students from one Chilean region.

PubMed

Castellucci, H I; Arezes, P M; Molenbroek, J F M

2015-01-01

Most of the worldwide standards used for furniture selection suggest the use of the Stature of the school children, assuming that all the other anthropometric characteristics will also be appropriate. However, it is important to consider that students' growth differ with age. The aim of this study is to determine if Popliteal Height can be used as a better, or more adequate, measure for classroom furniture selection when comparing with Stature. This study involved a representative group of 3046 students from the Valparaíso Region, in Chile. Regarding the methodology, eight anthropometric measures were gathered, as well as six furniture dimensions from the Chilean standard. After assigning the level of school furniture using Stature and Popliteal Height to each of the students, six mismatch equations were applied. The results show that when using Popliteal Height, higher levels of match were obtained for the two more important furniture dimensions. Additionally, it also presents a better cumulative fit than Stature. In conclusion, it seems that Popliteal Height can be the most accurate anthropometric measure for classroom furniture selection purposes. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Anthropometric assessment of the nutritional status of preschool-age children in Cape Verde

PubMed Central

Wennberg, A.

1988-01-01

The nutritional status of preschool-age children (0-6 years old) in Cape Verde was assessed using anthropometric measurements in a survey that involved 17 017 children from all regions of the country. About 26% of the estimated population in the target age group was included. Data were collected through primary health care centres during the latter part of 1983. The nutritional indicators weight-for-height, weight-for-age, and height-for-age were compared with reference data from the U.S. National Center for Health Statistics. Values of the indicators below -2 standard deviations of the median were considered to represent moderate undernutrition, while values below -3 standard deviations were taken to indicate severe malnutrition. The prevalence of low weight-for-height (wasting) was 2.5%, while that of severe wasting was 0.6%. The corresponding prevalences of low height-for-age and weight-for-age were 13.1% and 17.2%, respectively, with severe categories representing 2.3% and 6.1%, respectively, of the cases in the total sample. There is therefore a relatively strong tendency towards growth retardation or chronic, moderate nutritional deprivation in preschool-age children in Cape Verde, although there exist interregional variations. PMID:3262443

Arm span as a proxy measure for height and estimation of nutritional status: a study among Dhimals of Darjeeling in West Bengal India.

PubMed

Datta Banik, Sudip

2011-11-01

This study aimed to understand the interrelationship between height and arm span and also to estimate nutritional status from arm span. In an anthropometric survey conducted among the Dhimals (227 males and 223 females, total = 450) of Naxalbari in West Bengal, India, measurements were recorded in age groups ranging between 10-59 years. Males were taller and had longer arm spans than females. The height-arm span ratio was 0.98-0.99, indicating height to be slightly less than arm span in both sexes. High correlation between these two dimensions was also observed. Regression equations provided a good model for estimating height from arm span (predictor). In all age groups of both sexes, values of standardized coefficient beta exhibited high significance (p ( 0.001). Residuals showed no pattern and were random. No significant difference between height-based body mass index or BMI (body weight/height(2)) and estimated arm span-based BMI (body weight/arm span(2)) was observed in any age group. Arm span was found to be an effective surrogate measure for BMI.

Height perception influenced by texture gradient.

PubMed

Tozawa, Junko

2012-01-01

Three experiments were carried out to examine whether a texture gradient influences perception of relative object height. Previous research implicated texture cues in judgments of object width, but similar influences have not been demonstrated for relative height. In this study, I evaluate a hypothesis that the projective ratio of the number of texture elements covered by the objects combined with the ratio of the retinal object heights determines percepts of relative object height. Density of texture background was varied: four density conditions ranged from no-texture to very dense texture. In experiments 1 and 2, participants judged the height of comparison bar compared to the standard bar positioned on no-texture or textured backgrounds. Results showed relative height judgments differed with texture manipulations, consistent with predictions from a hypothesised combination of the number of texture elements with retinal height (experiment 1), or partially consistent with this hypothesis (experiment 2). In experiment 2, variations in the position of a comparison object showed that comparisons located far from the horizon were judged more poorly than in other positions. In experiment 3 I examined distance perception; relative distance judgments were found to be also affected by textured backgrounds. Results are discussed in terms of Gibson's relational theory and distance calibration theory.

Cross-validation of the Beunen-Malina method to predict adult height.

PubMed

Beunen, Gaston P; Malina, Robert M; Freitas, Duarte I; Maia, José A; Claessens, Albrecht L; Gouveia, Elvio R; Lefevre, Johan

2010-08-01

The purpose of this study was to cross-validate the Beunen-Malina method for non-invasive prediction of adult height. Three hundred and eight boys aged 13, 14, 15 and 16 years from the Madeira Growth Study were observed at annual intervals in 1996, 1997 and 1998 and re-measured 7-8 years later. Height, sitting height and the triceps and subscapular skinfolds were measured; skeletal age was assessed using the Tanner-Whitehouse 2 method. Adult height was measured and predicted using the Beunen-Malina method. Maturity groups were classified using relative skeletal age (skeletal age minus chronological age). Pearson correlations, mean differences and standard errors of estimate (SEE) were calculated. Age-specific correlations between predicted and measured adult height vary between 0.70 and 0.85, while age-specific SEE varies between 3.3 and 4.7 cm. The correlations and SEE are similar to those obtained in the development of the original Beunen-Malina method. The Beunen-Malina method is a valid method to predict adult height in adolescent boys and can be used in European populations or populations from European ancestry. Percentage of predicted adult height is a non-invasive valid method to assess biological maturity.

Use of high-speed cinematography and computer generated gait diagrams for the study of equine hindlimb kinematics.

PubMed

Kobluk, C N; Schnurr, D; Horney, F D; Sumner-Smith, G; Willoughby, R A; Dekleer, V; Hearn, T C

1989-01-01

High-speed cinematography with computer aided analysis was used to study equine hindlimb kinematics. Eight horses were filmed at the trot or the pace. Filming was done from the side (lateral) and the back (caudal). Parameters measured from the lateral filming included the heights of the tuber coxae and tailhead, protraction and retraction of the hoof and angular changes of the tarsus and stifle. Abduction and adduction of the limb and tarsal height changes were measured from the caudal filming. The maximum and minimum values plus the standard deviations and coefficients of variations are presented in tabular form. Three gait diagrams were constructed to represent stifle angle versus tarsal angle, metatarsophalangeal height versus protraction-retraction (fetlock height diagram) and tuber coxae and tailhead height versus stride (pelvic height diagram). Application of the technique to the group of horses revealed good repeatability of the gait diagrams within a limb and the diagrams appeared to be sensitive indicators of left/right asymmetries.

Prevalence and Trend of Overweight and Obesity among Schoolchildren in Ahvaz, Southwest of Iran

PubMed Central

Tabesh, Hamed; Hosseiny, Sayyed Mahdi; Kompani, Farshid; Saki, Azadeh; Firoozabadi, Maliheh Saeed; Chenary, Roghayeh; Fard, Mahta Mehrabian

2014-01-01

Introduction: Obesity is an important risk factor for some chronic diseases. Since the effect of obesity is long-standing, monitoring childhood obesity should be the first step in the health policy for interventions regarding early prevention of chronic diseases. In this study we aim to determine the prevalence of overweight and obesity among school children in the city of Ahvaz. Methods: A cross-sectional survey was designed. A sample of 5811 children, 2904 (49.97%) boys and 2907 (50.03%) girls, was selected and their heights and weights were measured in 2012-2013 academic year. Measurements of height and weight were made by using calibrated equipment and according to standardized protocol with the children having light clothes and without wearing shoes. The adjusted odds ratio of obesity and overweight for age and sex were calculated from multiple logistic regression model. Results: A total 685 (23.6%) of boys and 561 (19.3%) of girls were overweight. and 190(6.05%) of boys and 130 (4.5%) of girls were obese. The proportion of overweight and obese boys was significantly higher than that of girls (p<0.001). Logistic regression showed significant increase in the likelihood of being overweight with the increasing age OR=1.50, C.I.95%: (1.43, 1.57). Conclusion: The prevalence of overweight and obesity increased markedly with age. This shows the importance of early prevention by doing interventions and training since the first year of primary school. PMID:24576363

Prevalence and trend of overweight and obesity among schoolchildren in Ahvaz, Southwest of Iran.

PubMed

Tabesh, Hamed; Hosseiny, Sayyed Mahdi; Kompani, Farshid; Saki, Azadeh; Firoozabadi, Maliheh Saeed; Chenary, Roghayeh; Mehrabian Fard, Mahta

2013-11-26

Obesity is an important risk factor for some chronic diseases. Since the effect of obesity is long-standing, monitoring childhood obesity should be the first step in the health policy for interventions regarding early prevention of chronic diseases. In this study we aim to determine the prevalence of overweight and obesity among school children in the city of Ahvaz. A cross-sectional survey was designed. A sample of 5811 children, 2904 (49.97%) boys and 2907 (50.03%) girls, was selected and their heights and weights were measured in 2012-2013 academic year. Measurements of height and weight were made by using calibrated equipment and according to standardized protocol with the children having light clothes and without wearing shoes. The adjusted odds ratio of obesity and overweight for age and sex were calculated from multiple logistic regression model. A total 685 (23.6%) of boys and 561 (19.3%) of girls were overweight. and 190(6.05%) of boys and 130 (4.5%) of girls were obese. The proportion of overweight and obese boys was significantly higher than that of girls (p<0.001). Logistic regression showed significant increase in the likelihood of being overweight with the increasing age OR=1.50, C.I.95%: (1.43, 1.57). The prevalence of overweight and obesity increased markedly with age. This shows the importance of early prevention by doing interventions and training since the first year of primary school.

Association of Anthropometric Indices of Obesity with Hypertension in Chinese Elderly: An Analysis of Age and Gender Differences

PubMed Central

Wang, Qian; Xu, Lingzhong; Li, Jiajia; Sun, Long; Qin, Wenzhe; Ding, Gan; Zhu, Jing; Zhang, Jiao; Yu, Zihang; Xie, Su

2018-01-01

This study aims to explore the association of anthropometric indices of obesity with hypertension in Chinese elderly and its possible gender and age differences. A total of 7070 adults age 60 or older were interviewed in a cross-sectional study conducted in 2017. Anthropometric indices for each participant were measured by using standard methods of trained doctoral/master students. We performed two binary logistic regression models to examine the association of the nine different anthropometric indices and hypertension by gender. Lastly, analyses were performed in two steps stratified for age. Comparing individuals with and without hypertension, there were statistically significant differences in anthropometric indices except height, a body shape index (ABSI), and hip index (HI) in males; and except height in females. There were gender differences in the relationship between anthropometric indices and the prevalence of hypertension in Chinese older adults. After stratification by age, the associations of all anthropometric indices became weaker, disappeared, or even went in the opposite direction. Furthermore, body mass index (BMI) in men (except individuals older than 80) and hip circumference (HC) in women showed a significant impact on the risk of hypertension. The association of anthropometric indices of obesity with hypertension in Chinese elderly differ by gender and age. These findings indicate a need to develop gender-specific strategies for the male and female elderly in the primary and secondary prevention of hypertension. PMID:29671813

Revisiting the Rossby Haurwitz wave test case with contour advection

NASA Astrophysics Data System (ADS)

Smith, Robert K.; Dritschel, David G.

2006-09-01

This paper re-examines a basic test case used for spherical shallow-water numerical models, and underscores the need for accurate, high resolution models of atmospheric and ocean dynamics. The Rossby-Haurwitz test case, first proposed by Williamson et al. [D.L. Williamson, J.B. Drake, J.J. Hack, R. Jakob, P.N. Swarztrauber, A standard test set for numerical approximations to the shallow-water equations on the sphere, J. Comput. Phys. (1992) 221-224], has been examined using a wide variety of shallow-water models in previous papers. Here, two contour-advective semi-Lagrangian (CASL) models are considered, and results are compared with previous test results. We go further by modifying this test case in a simple way to initiate a rapid breakdown of the basic wave state. This breakdown is accompanied by the formation of sharp potential vorticity gradients (fronts), placing far greater demands on the numerics than the original test case does. We also go further by examining other dynamical fields besides the height and potential vorticity, to assess how well the models deal with gravity waves. Such waves are sensitive to the presence or not of sharp potential vorticity gradients, as well as to numerical parameter settings. In particular, large time steps (convenient for semi-Lagrangian schemes) can seriously affect gravity waves but can also have an adverse impact on the primary fields of height and velocity. These problems are exacerbated by a poor resolution of potential vorticity gradients.

An Experimental Study of a Separated/Reattached Flow Behind a Backward-Facing Step. Re(sub h) = 37,000

NASA Technical Reports Server (NTRS)

Jovic, Srba

1996-01-01

An experimental study was carried out to investigate turbulent structure of a two-dimensional incompressible separating/reattaching boundary layer behind a backward-facing step. Hot-wire measurement technique was used to measure three Reynolds stresses and higher-order mean products of velocity fluctuations. The Reynolds number, Re(sub h), based on the step height, h, and the reference velocity, U(sub 0), was 37,000. The upstream oncoming flow was fully developed turbulent boundary layer with the Re(sub theta) = 3600. All turbulent properties, such as Reynolds stresses, increase dramatically downstream of the step within an internally developing mixing layer. Distributions of dimensionless mean velocity, turbulent quantities and antisymmetric distribution of triple velocity products in the separated free shear layer suggest that the shear layer above the recirculating region strongly resembles free-shear mixing layer structure. In the reattachment region close to the wall, turbulent diffusion term balances the rate of dissipation since advection and production terms appear to be negligibly small. Further downstream, production and dissipation begin to dominate other transport processes near the wall indicating the growth of an internal turbulent boundary layer. In the outer region, however, the flow still has a memory of the upstream disturbance even at the last measuring station of 51 step-heights. The data show that the structure of the inner layer recovers at a much faster rate than the outer layer structure. The inner layer structure resembles the near-wall structure of a plane zero pressure-gradient turbulent boundary layer (plane TBL) by 25h to 30h, while the outer layer structure takes presumably over 100h.

Normative data for IQ, height and head circumference for children in Saudi Arabia.

PubMed

Batterjee, Adel A; Khaleefa, Omar; Ashaer, Khalil; Lynn, Richard

2013-07-01

Normative data are reported for intelligence, height and head circumference for a sample of 1553 6- to 15-year-olds in Saudi Arabia, and for the correlations between these variables. Intelligence was tested with the Standard Progressive Matrices, on which the Saudi sample obtained a British IQ of 76.2. There were no significant differences in means between boys and girls and differences in variability were inconsistent. The heights of the Saudi sample were generally lower than those of the American norms. The differences in head circumferences between the Saudi children and the American norms were inconsistent. Correlations between IQ and height were weaker than those found in other studies but correlations between IQ and head circumference were positive.

Parentally-adjusted deficit of height as a prognostic factor of the effectiveness of growth hormone (GH) therapy in children with GH deficiency.

PubMed

Hilczer, Maciej; Smyczyńska, Joanna; Lewiński, Andrzej

2006-01-01

Parental height is the most important identifiable factor influencing final height (FH) of children with growth hormone (GH) deficiency (GHD), treated with GH. Assessment of FH of patients with GHD--classified into familial short stature (FSS) and non-familial short stature (non-FSS) according to parentally adjusted deficit of height. The analysis comprised 101 patients (76 boys) with childhood-onset GHD. Final height was compared with patients' height before GH therapy, predicted adult height (PAH) and target height (TH). Both GH peak in stimulating tests and height standard deviation score (SDS) before the therapy were significantly lower in non-FSS than in FSS. Target height was significantly lower in FSS than in non-FSS. Parentally-adjusted deficit of height was significantly more profound in non-FSS than in FSS. The prognosis of adult height was very similar in both groups of patients, being significantly worse in non-FSS than in FSS while corrected by TH. The absolute FH was similar in FSS and non-FSS, being, however, significantly lower in non-FSS than in FSS while corrected by TH. Improvement of height was significantly better in non-FSS than in FSS. In both groups, FH SDS was significantly better than height SDS before the therapy (H0SDS). In FSS group, PAH was similar to TH, moreover, FH corresponded to both PAH and TH. In non-FSS group FH was significantly higher than PAH, but both FH and PAH were significantly lower than TH. 1) Growth hormone therapy was more effective in the patients with non-FSS than in those with FSS. 2) Parentally-adjusted deficit of height is an important prognostic factor of GH therapy effectiveness.

Tree Height Calculator: An Android App for Estimating Tree Height

NASA Astrophysics Data System (ADS)

Burca, V. S.; Htet, N. M.; Huang, X.; de Lanerolle, T. R.; Morelli, R.; Gourley, J. R.

2011-12-01

Conventionally, measuring tree height requires a collection of different tools - clinometer, transit, pencil, paper, laptop computer. Results are recorded manually and entered into a spreadsheet or database for future calculation and analysis. Tree Height Calculator is a mobile Android app the integrates the various steps in this process thereby improving the accuracy and dramatically reducing the time required to go from taking measurements to analyzing data. Given the user's height and the distance from the base of the tree (which can be downloaded into the app from a server), the app uses the phone's orientation sensor to calculate the angle of elevation. A simple trigonometric formula is then used to calculate and record the tree's height in the phone's database. When the phone has a WiFi connection, the data are transmitted to a server, from where they can be downloaded directly into a spreadsheet. The application was first tested in an Environmental Science laboratory at Trinity College. On the first trial, 103 data samples were collected, stored, and uploaded to the online database with only couple of dropped data points. On the second trial, 98 data samples were gathered with no loss of data. The app combined the individual measurements taken by the students in the lab, reducing the time required to produce a graph of the class's results from days to hours.

Phenomenological study of subsonic turbulent flow over a swept rearward-facing step. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Selby, G. V.

1982-01-01

The phenomenology of turbulent, subsonic flow over a swept, rearward-facing step was studied. Effects of variations in step height, sweep angle, base geometry, and end conditions on the 3-D separated flow were examined. The separated flow was visualized using smoke wire, oil drop, and surface tuft techniques. Measurements include surface pressure, reattachment distance and swirl angle. Results indicate: (1) model/test section coupling affects the structure of the separated flow, but spanwise end conditions do not; (2) the independence principle is evidently valid for sweep angles up to 38 deg; (3) a sweep angle/swirl angle correlation exists; and (4) base modifications can significantly reduce the reattachment distance.

Cephalometric features in isolated growth hormone deficiency.

PubMed

Oliveira-Neto, Luiz Alves; Melo, Mariade de Fátima B; Franco, Alexandre A; Oliveira, Alaíde H A; Souza, Anita H O; Valença, Eugênia H O; Britto, Isabela M P A; Salvatori, Roberto; Aguiar-Oliveira, Manuel H

2011-07-01

To analyze cephalometric features in adults with isolated growth hormone (GH) deficiency (IGHD). Nine adult IGHD individuals (7 males and 2 females; mean age, 37.8 ± 13.8 years) underwent a cross-sectional cephalometric study, including 9 linear and 5 angular measurements. Posterior facial height/anterior facial height and lower-anterior facial height/anterior facial height ratios were calculated. To pool cephalometric measurements in both genders, results were normalized by standard deviation scores (SDS), using the population means from an atlas of the normal Brazilian population. All linear measurements were reduced in IGHD subjects. Total maxillary length was the most reduced parameter (-6.5 ± 1.7), followed by a cluster of six measurements: posterior cranial base length (-4.9 ± 1.1), total mandibular length (-4.4 ± 0.7), total posterior facial height (-4.4 ± 1.1), total anterior facial height (-4.3 ± 0.9), mandibular corpus length (-4.2 ± 0.8), and anterior cranial base length (-4.1 ± 1.7). Less affected measurements were lower-anterior facial height (-2.7 ± 0.7) and mandibular ramus height (-2.5 ± 1.5). SDS angular measurements were in the normal range, except for increased gonial angle (+2.5 ± 1.1). Posterior facial height/anterior facial height and lower-anterior facial height/anterior facial height ratios were not different from those of the reference group. Congenital, untreated IGHD causes reduction of all linear measurements of craniofacial growth, particularly total maxillary length. Angular measurements and facial height ratios are less affected, suggesting that lGHD causes proportional blunting of craniofacial growth.

Agrarian reforms, agrarian crisis and the biological standard of living in Poland, 1844-1892.

PubMed

Kopczyński, Michał

2007-12-01

This paper examines changes in the biological well-being in the Kingdom of Poland on the basis of data concerning the physical height of conscripts drafted into the Russian army between the 1860s and 1913. The rise in the average height began with the cohorts born in the mid-1860s and lasted until the mid-1880s. The height increment was 1.9 cm. In the birth cohorts of 1882-1892 the mean height stagnated as a result of the agrarian crisis. In Galicia the increase in height of conscripts began also with the cohorts born in the 1860s and lasted uninterruptedly until 1890. The persistence of the trend in the 1880s was due to the development of animal husbandry after the closure of the border against imported cattle in 1882 and the more balanced pattern of modernization than in the Kingdom of Poland.

Multiple Solvent Extraction System with Flow Injection Technology.

DTIC Science & Technology

1981-09-30

encounters a back extraction step where the direction of the extraction is from organic to aqueous solvent. Thus it is advantageous to incorporate both...stainless steel ( Alltech Associates, Arlington Heights, IQ) and prepared from a single section of 180 cmn in length. The Section 2 mixing and extraction

[Triptorelin therapy in girls with central precocious puberty increases body mass index].

PubMed

Martín Díaz, M J; Soriano Guillén, L; Muñoz Calvo, M T; Pozo Román, J; Argente Oliver, J

2006-11-01

The most important complications of central precocious puberty (CPP) in girls are loss of height and multiple psychosocial problems. To study the effect of triptorelin therapy in a cohort of girls with CPP. Thirty-four girls diagnosed with organic or idiopathic CPP and treated with monthly triptorelin were studied. Age, height in standard deviation (SD), bone age (Greulich and Pyle), height prediction (Bayle-Pinneau), body mass index (BMI) in SD, uterine size (pelvic ultrasound), target height, cranial magnetic resonance imaging, triptorelin dose, and treatment duration were studied. Triptorelin produced a statistically significant reduction in growth velocity and an increase in BMI after 1 year of therapy and these changes were maintained after discontinuation of therapy. Adult height in these patients was in accordance with their target genetic height, as well as with their predicted height according to the method of Bayley-Pinneau. No significant differences were found between age of menarche in our patients and in controls. Adult height in patients with organic CPP was significantly lower than that in patients with idiopathic CPP. 1. Triptorelin can increase BMI in girls with CPP. 2. The presence of an organic cause in patients with CPP worsens the prognosis for adult height. 3. The Bayley-Pinneau prediction method for "average" bone age is useful for establishing a prognosis of adult height in girls with CPP treated with triptorelin.

Energy costs of manual therapy: effects of plinth height and an assistive device.

PubMed

O'Connell, D G; Holmes, C F; Santos, J L; Jordan, E; Acosta, F

1994-01-01

The purpose of this investigation was to examine the metabolic and cardiopulmonary responses of an experienced therapist (8 years experience) performing manual therapy at standard (S) plinth height (31 in), elevated (E) plinth height (38 in), and standard (SMTH) and elevated (EMTH) plinth height wearing a manual therapy harness (MTH). The MTH, developed by one of the investigators (J.L.S.), is a vestlike device worn by the therapist, which, when attached to the patient, can be used to distract articular surfaces. The MTH allows the therapist more freedom of hand movement and use of body weight to help provide joint distraction. Inferior glide (Grade 3-Maitland) was provided to the lift hip of 12 individuals at a rate of 20 oscillations per minute for 4 minutes, continuously, so that steady-rate metabolic conditions could be established. Mean body mass and height for the 12 individuals was 70±10.5 kg and 174.5±13 cm, respectively. The therapist's heart rate returned to resting levels between each of the randomly assigned treatments. One subject was treated daily. The therapist (age 32) was chosen because of his clinical experience, similar height (172 em) and weight (73 kg) to the average adult American male, and excellent intra- and interday (5%≤ METs, 5%≤ HR) reproducibility. Metabolic equivalents (METs), heart rate (HR), and rate of perceived exertion (RPE) were measured and averaged for the last 2 minutes of each treatment condition. The therapist was unaware of day-to-day test results except for RPE. Mean METs were 3. 7,3.2,2.6, and 2.4 for S, E, SMTH, and EMTH, respectively. Mean HRs were .117, 110, 104, and 93 beats/min for S, E, SMTH, and EMTH, respectively. RPE was 11. 0,8.7, 7.9, and 7.3jorS, E, SMTH, and EMTH, respectively. Repeated-measures analysis of variance (Scheffé F-test) revealed that SMTH and EMTH METs were similar, and significantly different (p≤0.05) from Sand E. METs for E were significantly different and lower than for S. HRs were significantly greater during E than the SMTH condition. RPE for S was significantly greater than SMTH, E, or EMTH. It can be concluded that the MTH significantly reduced the physiologic cost of providing manual therapy at either standard or elevated plinth height. further studies on these types of assistive devices and the effects of health status of the therapist on the provision of manual therapy treatments at various plinth heights are needed.

An aggregation-volume-bias Monte Carlo investigation on the condensation of a Lennard-Jones vapor below the triple point and crystal nucleation in cluster systems: an in-depth evaluation of the classical nucleation theory.

PubMed

Chen, Bin; Kim, Hyunmi; Keasler, Samuel J; Nellas, Ricky B

2008-04-03

The aggregation-volume-bias Monte Carlo based simulation technique, which has led to our recent success in vapor-liquid nucleation research, was extended to the study of crystal nucleation processes. In contrast to conventional bulk-phase techniques, this method deals with crystal nucleation events in cluster systems. This approach was applied to the crystal nucleation of Lennard-Jonesium under a wide range of undercooling conditions from 35% to 13% below the triple point. It was found that crystal nucleation in these model clusters proceeds initially via a vapor-liquid like aggregation followed by the formation of crystals inside the aggregates. The separation of these two stages of nucleation is distinct except at deeper undercooling conditions where the crystal nucleation barrier was found to diminish. The simulation results obtained for these two nucleation steps are separately compared to the classical nucleation theory (CNT). For the vapor-liquid nucleation step, the CNT was shown to provide a reasonable description of the critical cluster size but overestimate the barrier heights, consistent with previous simulation studies. On the contrary, for the crystal nucleation step, nearly perfect agreement with the barrier heights was found between the simulations and the CNT. For the critical cluster size, the comparison is more difficult as the simulation data were found to be sensitive to the definition of the solid cluster, but a stringent criterion and lower undercooling conditions generally lead to results closer with the CNT. Additional simulations at undercooling conditions of 40% or above indicate a nearly barrierless transition from the liquid to crystalline-like structure for sufficiently large clusters, which leads to further departure of the barrier height predicted by the CNT from the simulation data for the aggregation step. This is consistent with the latest experimental results on argon that show an unusually large underestimation of the nucleation rate by the CNT toward deep undercooling conditions.

[Characteristics of traumatic death of people in high mountains].

PubMed

Mechukaev, A A; Mechukaev, A M

2006-01-01

Lethal accidents with tourists who died of trauma in high mountains of Kabardino-Balkaria were retrospectively studied for the period from 1978 to 2003. The victims were 163 males and 17 females aged 14-72 years. Among causes of death most prevalent was a step-by-step blunt mechanical trauma as a result of falling from a great height. In such conditions the body obtains great kinetic energy causing a severe, often lethal, craniocerebral injury with destruction of the brain, blunt injury of the chest, thoracic and other organs.

Conductance and refraction across a Barrier in Phosphorene

NASA Astrophysics Data System (ADS)

Dahal, Dipendra; Gumbs, Godfrey

The transmission coefficient and ballistic conductance for monolayer black phosphorene is calculated when a potential step or square barrier is present. The Landauer-B¨uttiker formalism is employed in our calculations of the conductance. We obtain the refractive index for the step potential barrier when an incident beam of electron travel along different paths so as to observe what role the anisotropy of the energy bands plays. Numerical results are presented for various potential heights and barrier widths and these are compared with those for gapless and gapped graphene.

Height and body mass index values of nineteenth-century New York legislators.

PubMed

Bodenhorn, Howard

2010-03-01

Previous studies of mid-nineteenth-century American BMI values have used data created by military academies and penitentiaries. This paper uses an alternative data set, constructed from legislative documents in which the heights and weights of New York State legislators were recorded. The results reveal that middle- to upper-middle class Americans maintained BMI values closer to the modern standard than did students and prisoners. The average BMI value among this group was 24 and their height-weight combinations did not greatly diverge from historical mortality risk optima. Copyright 2009 Elsevier B.V. All rights reserved.

A Computational Methodology to Screen Activities of Enzyme Variants

PubMed Central

Hediger, Martin R.; De Vico, Luca; Svendsen, Allan; Besenmatter, Werner; Jensen, Jan H.

2012-01-01

We present a fast computational method to efficiently screen enzyme activity. In the presented method, the effect of mutations on the barrier height of an enzyme-catalysed reaction can be computed within 24 hours on roughly 10 processors. The methodology is based on the PM6 and MOZYME methods as implemented in MOPAC2009, and is tested on the first step of the amide hydrolysis reaction catalyzed by the Candida Antarctica lipase B (CalB) enzyme. The barrier heights are estimated using adiabatic mapping and shown to give barrier heights to within 3 kcal/mol of B3LYP/6-31G(d)//RHF/3-21G results for a small model system. Relatively strict convergence criteria (0.5 kcal/(molÅ)), long NDDO cutoff distances within the MOZYME method (15 Å) and single point evaluations using conventional PM6 are needed for reliable results. The generation of mutant structures and subsequent setup of the semiempirical calculations are automated so that the effect on barrier heights can be estimated for hundreds of mutants in a matter of weeks using high performance computing. PMID:23284627

A stochastic approach to noise modeling for barometric altimeters.

PubMed

Sabatini, Angelo Maria; Genovese, Vincenzo

2013-11-18

The question whether barometric altimeters can be applied to accurately track human motions is still debated, since their measurement performance are rather poor due to either coarse resolution or drifting behavior problems. As a step toward accurate short-time tracking of changes in height (up to few minutes), we develop a stochastic model that attempts to capture some statistical properties of the barometric altimeter noise. The barometric altimeter noise is decomposed in three components with different physical origin and properties: a deterministic time-varying mean, mainly correlated with global environment changes, and a first-order Gauss-Markov (GM) random process, mainly accounting for short-term, local environment changes, the effects of which are prominent, respectively, for long-time and short-time motion tracking; an uncorrelated random process, mainly due to wideband electronic noise, including quantization noise. Autoregressive-moving average (ARMA) system identification techniques are used to capture the correlation structure of the piecewise stationary GM component, and to estimate its standard deviation, together with the standard deviation of the uncorrelated component. M-point moving average filters used alone or in combination with whitening filters learnt from ARMA model parameters are further tested in few dynamic motion experiments and discussed for their capability of short-time tracking small-amplitude, low-frequency motions.

Fabrication of near-field optical apertures in aluminium by a highly selective corrosion process in the evanescent field.

PubMed

Haefliger, D; Stemmer, A

2003-03-01

A simple, one-step process to fabricate high-quality apertures for scanning near-field optical microscope probes based on aluminium-coated silicon nitride cantilevers is presented. A thin evanescent optical field at a glass-water interface was used to heat the aluminium at the tip apex due to light absorption. The heat induced a breakdown of the passivating oxide layer and local corrosion of the metal, which selectively exposed the front-most part of the probe tip from the aluminium. Apertures with a protruding silicon nitride tip up to 72 nm in height were fabricated. The height of the protrusion was controlled by the extent of the evanescent field, whereas the diameter depended on the geometry of the probe substrate. The corrosion process proved to be self-terminating, yielding highly reproducible tip heights. Near-field optical resolution in a transmission mode of 85 nm was demonstrated.

MASH test 3-10 on 31-inch w-beam guardrail with standard offset blocks

DOT National Transportation Integrated Search

2011-03-01

The Texas Department of Transportation (TxDOT) initiated a review of their guardrail standards : based on the outcome of recent crash test results and a Federal Highway Administration technical : memorandum pertaining to guardrail height. TxDOT expre...

Uncertainty of large-area estimates of indicators of forest structural gamma diversity: A study based on national forest inventory data

Treesearch

Susanne Winter; Andreas Böck; Ronald E. McRoberts

2012-01-01

Tree diameter and height are commonly measured forest structural variables, and indicators based on them are candidates for assessing forest diversity. We conducted our study on the uncertainty of estimates for mostly large geographic scales for four indicators of forest structural gamma diversity: mean tree diameter, mean tree height, and standard deviations of tree...

Investigating methods for determining mismatch in near side vehicle impacts - biomed 2009.

PubMed

Loftis, Kathryn; Martin, R Shayn; Meredith, J Wayne; Stitzel, Joel

2009-01-01

This study investigates vehicle mismatch in severe side-impact motor vehicle collisions. Research conducted by the Insurance Institute for Highway Safety has determined that vehicle mismatch often leads to very severe injuries for occupants in the struck vehicle, because the larger striking vehicle does not engage the lower sill upon impact, resulting in severe intrusions into the occupant compartment. Previous studies have analyzed mismatched collisions according to vehicle type, not by the difference in vehicle height and weight. It is hypothesized that the combination of a heavier striking vehicle at a taller height results in more intrusion for the struck vehicle and severe injury for the near side occupant. By analyzing Crash Injury Research and Engineering Network (CIREN) data and occupant injury severity, it is possible to study intrusion and injuries that occur due to vehicle mismatch. CIREN enrolls seriously injured occupants involved in motor vehicle crashes (MVC) across the United States. From the Toyota-Wake Forest University CIREN center, 23 near side impact cases involving two vehicles were recorded. Only 3 of these seriously injured occupant cases were not considered mismatched according to vehicle curb weight, and only 2 were not considered vehicle mismatched according to height differences. The mismatched CIREN cases had an average difference in vehicle curb weight of 737.0 kg (standard deviation of 646.8) and an average difference in vehicle height of 16.38 cm (standard deviation of 7.186). There were 13 occupants with rib fractures, 12 occupants with pelvic fractures, 9 occupants with pulmonary contusion, and 5 occupants with head injuries, among other multiple injuries. The average Injury Severity Score (ISS) for these occupants was 27, with a standard deviation of 16. The most serious injuries resulted in an Abbreviated Injury Scale (AIS) of 5, which included 3 occupants. Each of these AIS 5 injuries were to different body regions on different occupants. By analyzing the vehicle information and occupant injuries, it was found that the vehicle mismatch problem involves differences in vehicle weights and heights and also results in severe injuries to multiple body regions for the near side occupant involved. There was a low correlation of vehicle height difference to occupant ISS.

Towards a first realization of the International Height Reference System (IHRS)

NASA Astrophysics Data System (ADS)

Sanchez, Laura; Ihde, Johannes; Pail, Roland; Gruber, Thomas; Barzaghi, Riccardo; Marti, Urs; Agren, Jonas; Sideris, Michael; Novak, Pavel

2017-04-01

The IAG Resolution No. 1 released during the IUGG 2015 General Assembly outlines five conventions for the definition of the International Height Reference System (IHRS). The definition is given in terms of potential parameters: the vertical coordinates are geopotential numbers referring to an equipotential surface of the Earth's gravity field realized by the conventional value W0 = 62 636 853.4 m2s-2. The spatial reference of the position P for the potential W(P) = W(X) is given by coordinates X of the International Terrestrial Reference Frame (ITRF). This Resolution also states that parameters, observations, and data shall be related to the mean tidal system/mean crust. At present, the main challenge is the realization of the IHRS; i.e., the establishment of the International Height Reference Frame (IHRF). It is expected that the IHRF follows the same structure as the ITRF: a global network with regional and national densifications, whose geopotential numbers referring to the global IHRS are known. According to the GGOS objectives, the target accuracy of these global geopotential numbers is 1 x 10-2 m2s-2. In practice, the precise realization of the IHRS is limited by different aspects; for instance, no unified standards or methods for the determination of the potential values W(P); application of different conventions for the gravity field modelling and the estimation of the position vectors X; inhomogeneous distribution of the geodetic infrastructure; restricted accessibility to terrestrial gravity data to increase the GGM resolution; insufficient modelling of geodynamic phenomena, etc. This may restrict the expected accuracy of 1 x 10-2 m2s-2 to some orders lower (from 10 x 10-2 m2s-2 to 100 x 10-2 m2s-2). This contribution discusses the required steps to outline a sustainable realization of the IHRS.

Defining sarcopenia in terms of risk of physical limitations: a 5-year follow-up study of 3,153 chinese men and women.

PubMed

Woo, Jean; Leung, Jason; Sham, Aprille; Kwok, Timothy

2009-12-01

To examine the definition of sarcopenia in Chinese subjects by relating the value of appendicular skeletal muscle mass (ASM) divided by height squared to physical functional outcomes after 4 years. Four-year prospective study. A Chinese community in Hong Kong SAR China. Three thousand one hundred fifty-three community-living men and women aged 65 and older. Information collected by questionnaire included demographics, health limitation on activities of daily living (ADLs), self-care, physical activity level, dietary intake, and psychosocial functioning. Measurements included height, weight, grip strength, step length in a 6-minute walk, and body composition. Four-year outcomes for those with ASM in kg per height in meters squared (ASM/ht(2)) less than 2 standard deviations (SDs) and 2 SDs or more below the young adult mean value were compared using analysis of variance and logistic regression, adjusting for potential confounding factors such as age, fat mass, presence or absence of malnutrition, dietary protein and vitamin D intake, comorbidity, and cognitive impairment. Participants with ASM/ht(2) 2 SDs or more below the young adult mean had lower grip strength and greater limitation in climbing stairs and general ADLs after adjusting for confounding factors. A U-shaped relationship was observed between physical limitation and ASM/ht(2), with increasing physical limitation below or above a range of 7.25 to 6.75 kg/m(2) in men and 6.00 to 6.25 kg/m(2) in women. Values of 5.25 to 6.74 kg/m(2) in women were associated with approximately 30% less risk of functional limitation after 5 years. No clear cutoff was found in men. Sarcopenia may be defined in terms of a range of values for ASM/ht(2) associated with the lowest risk of future physical limitations. The importance of establishing a quantitative value for the definition of sarcopenia may facilitate future interventional studies using pharmacological or nonpharmacological strategies.

Fully automated methods for the determination of hydrochlorothiazide in human plasma and urine.

PubMed

Hsieh, J Y; Lin, C; Matuszewski, B K; Dobrinska, M R

1994-12-01

LC assays utilizing fully automated sample preparation procedures on Zymark PyTechnology Robot and BenchMate Workstation for the quantification of hydrochlorothiazide (HCTZ) in human plasma and urine have been developed. After aliquoting plasma and urine samples, and adding internal standard (IS) manually, the robot executed buffer and organic solvent addition, liquid-liquid extraction, solvent evaporation and on-line LC injection steps for plasma samples, whereas, BenchMate performed buffer and organic solvent addition, liquid-liquid and solid-phase extractions, and on-line LC injection steps for urine samples. Chromatographic separations were carried out on Beckman Octyl Ultrasphere column using the mobile phase composed of 12% (v/v) acetonitrile and 88% of either an ion-pairing reagent (plasma) or 0.1% trifluoroacetic acid (urine). The eluent from the column was monitored with UV detector (271 nm). Peak heights for HCTZ and IS were automatically processed using a PE-Nelson ACCESS*CHROM laboratory automation system. The assays have been validated in the concentration range of 2-100 ng ml-1 in plasma and 0.1-20 micrograms ml-1 in urine. Both plasma and urine assays have the sensitivity and specificity necessary to determine plasma and urine concentrations of HCTZ from low dose (6.25/12.5 mg) administration of HCTZ to human subjects in the presence or absence of losartan.

Fusion of space-borne multi-baseline and multi-frequency interferometric results based on extended Kalman filter to generate high quality DEMs

NASA Astrophysics Data System (ADS)

Zhang, Xiaojie; Zeng, Qiming; Jiao, Jian; Zhang, Jingfa

2016-01-01

Repeat-pass Interferometric Synthetic Aperture Radar (InSAR) is a technique that can be used to generate DEMs. But the accuracy of InSAR is greatly limited by geometrical distortions, atmospheric effect, and decorrelations, particularly in mountainous areas, such as western China where no high quality DEM has so far been accomplished. Since each of InSAR DEMs generated using data of different frequencies and baselines has their own advantages and disadvantages, it is therefore very potential to overcome some of the limitations of InSAR by fusing Multi-baseline and Multi-frequency Interferometric Results (MMIRs). This paper proposed a fusion method based on Extended Kalman Filter (EKF), which takes the InSAR-derived DEMs as states in prediction step and the flattened interferograms as observations in control step to generate the final fused DEM. Before the fusion, detection of layover and shadow regions, low-coherence regions and regions with large height error is carried out because MMIRs in these regions are believed to be unreliable and thereafter are excluded. The whole processing flow is tested with TerraSAR-X and Envisat ASAR datasets. Finally, the fused DEM is validated with ASTER GDEM and national standard DEM of China. The results demonstrate that the proposed method is effective even in low coherence areas.

Seat and seatbelt accommodation in fire apparatus: Anthropometric aspects.

PubMed

Hsiao, Hongwei; Whitestone, Jennifer; Wilbur, Michael; Lackore, J Roger; Routley, J Gordon

2015-11-01

This study developed anthropometric information on U.S. firefighters to guide fire-apparatus seat and seatbelt designs and future standards development. A stratified sample of 863 male and 88 female firefighters across the U.S. participated in the study. The study results suggested 498 mm in width, 404 mm in depth, and 365-476 mm in height for seat pans; 429-522 mm in width and 542 mm in height for seat back; 871 mm in height for head support; a seat space of 733 mm at shoulder and 678 mm at hip; and a knee/leg clearance of 909 mm in fire truck cab. Also, 1520 mm of lap belt web effective length and 2828 mm of lap-and-shoulder belt web effective length were suggested. These data for fire-truck seats and seatbelts provide a foundation for fire apparatus manufacturers and standards committees to improve firefighter seat designs and seatbelt usage compliance. Published by Elsevier Ltd.

Estimating River Surface Elevation From ArcticDEM

NASA Astrophysics Data System (ADS)

Dai, Chunli; Durand, Michael; Howat, Ian M.; Altenau, Elizabeth H.; Pavelsky, Tamlin M.

2018-04-01

ArcticDEM is a collection of 2-m resolution, repeat digital surface models created from stereoscopic satellite imagery. To demonstrate the potential of ArcticDEM for measuring river stages and discharges, we estimate river surface heights along a reach of Tanana River near Fairbanks, Alaska, by the precise detection of river shorelines and mapping of shorelines to land surface elevation. The river height profiles over a 15-km reach agree with in situ measurements to a standard deviation less than 30 cm. The time series of ArcticDEM-derived river heights agree with the U.S. Geological Survey gage measurements with a standard deviation of 32 cm. Using the rating curve for that gage, we obtain discharges with a validation accuracy (root-mean-square error) of 234 m3/s (23% of the mean discharge). Our results demonstrate that ArcticDEM can accurately measure spatial and temporal variations of river surfaces, providing a new and powerful data set for hydrologic analysis.

Clinical height measurements are unreliable: a call for improvement.

PubMed

Mikula, A L; Hetzel, S J; Binkley, N; Anderson, P A

2016-10-01

Height measurements are currently used to guide imaging decisions that assist in osteoporosis care, but their clinical reliability is largely unknown. We found both clinical height measurements and electronic health record height data to be unreliable. Improvement in height measurement is needed to improve osteoporosis care. The aim of this study is to assess the accuracy and reliability of clinical height measurement in a university healthcare clinical setting. Electronic health record (EHR) review, direct measurement of clinical stadiometer accuracy, and observation of staff height measurement technique at outpatient facilities of the University of Wisconsin Hospital and Clinics. We examined 32 clinical stadiometers for reliability and observed 34 clinic staff perform height measurements at 12 outpatient primary care and specialty clinics. An EHR search identified 4711 men and women age 43 to 89 with no known metabolic bone disease who had more than one height measurement over 3 months. The short study period and exclusion were selected to evaluate change in recorded height not due to pathologic processes. Mean EHR recorded height change (first to last measurement) was -0.02 cm (SD 1.88 cm). Eighteen percent of patients had height measurement differences noted in the EHR of ≥2 cm over 3 months. The technical error of measurement (TEM) was 1.77 cm with a relative TEM of 1.04 %. None of the staff observed performing height measurements followed all recommended height measurement guidelines. Fifty percent of clinic staff reported they on occasion enter patient reported height into the EHR rather than performing a measurement. When performing direct measurements on stadiometers, the mean difference from a gold standard length was 0.24 cm (SD 0.80). Nine percent of stadiometers examined had an error of >1.5 cm. Clinical height measurements and EHR recorded height results are unreliable. Improvement in this measure is needed as an adjunct to improve osteoporosis care.

Impact of long-term treatment of methylphenidate on height and weight of school age children with ADHD.

PubMed

Zhang, H; Du, M; Zhuang, S

2010-08-01

Stimulant-associated growth deficits in children with attention deficit hyperactivity disorder (ADHD) have long been a concern. We chose 146 school age children diagnosed with ADHD being treated with methylphenidate (MPH) and 29 drug-free ADHD children, and followed them up for 2-4 years. We recorded the changes in height and weight after long-term methylphenidate treatment and analyzed the influence of confounding factors to growth in height, weight, and height velocity. The change of the gap between patients' height and mean height in the methylphenidate group was -1.86+/-0.82 cm ( P<0.001); in controls it was -0.26+/-0.51 cm ( P<0.05). The changes of height standard deviation score (SDS) in the methylphenidate group and controls were -0.14+/-0.23 SD ( P<0.001) and +0.05+/-0.10 SD ( P<0.05), respectively. The differences between the 2 groups were significant ( P<0.001). Both correlation and regression analyses indicated that the duration of treatment contributed significantly to the variance in change of height ( P<0.001). The height velocity was significantly attenuated in the first year. The change of the gap between the patients' weight and weight for height after methylphenidate was -0.14+/-1.25 kg ( P>0.05). From this study, a small but significant deceleration of height velocity has been identified as a long-term side effect of methylphenidate, the magnitude of the height deficit is related to the duration of treatment. Methylphenidate had no significant influence on weight and BMI values. Georg Thieme Verlag KG Stuttgart.New York.

The association between height and birth order: evidence from 652,518 Swedish men.

PubMed

Myrskylä, Mikko; Silventoinen, Karri; Jelenkovic, Aline; Tynelius, Per; Rasmussen, Finn

2013-07-01

Birth order is associated with outcomes such as birth weight and adult socioeconomic position (SEP), but little is known about the association with adult height. This potential birth order-height association is important because height predicts health, and because the association may help explain population-level height trends. We studied the birth order-height association and whether it varies by family characteristics or birth cohort. We used the Swedish Military Conscription Register to analyse adult height among 652,518 men born in 1951-1983 using fixed effects regression models that compare brothers and account for genetic and social factors shared by brothers. We stratified the analysis by family size, parental SEP and birth cohort. We compared models with and without birth weight and birth length controls. Unadjusted analyses showed no differences between the first two birth orders but in the fixed effects regression, birth orders 2, 3 and 4 were associated with 0.4, 0.7 and 0.8 cm (p<0.001 for each) shorter height than birth order 1, respectively. The associations were similar in large and small and high-SEP and low-SEP families, but were attenuated in recent cohorts. Birth characteristics did not explain these associations. Birth order is an important determinant of height. The height difference between birth orders 3 and 1 is larger than the population-level height increase achieved over 10 years. The attenuation of the effect over cohorts may reflect improvements in living standards. Decreases in family size may explain some of the secular-height increases in countries with decreasing fertility.

Climatological Processing and Product Development for the TRMM Ground Validation Program

NASA Technical Reports Server (NTRS)

Marks, D. A.; Kulie, M. S.; Robinson, M.; Silberstein, D. S.; Wolff, D. B.; Ferrier, B. S.; Amitai, E.; Fisher, B.; Wang, J.; Augustine, D.;

Sex estimation using anthropometry of feet and footprints in a Western Australian population.

PubMed

Hemy, Naomi; Flavel, Ambika; Ishak, Nur-Intaniah; Franklin, Daniel

2013-09-10

An important component of forensic investigation is the identification of deceased (and increasingly living) individuals, which is often the role of the forensic anthropologist. One of the most valuable steps towards identification is via a biological profile, developed through the application of population specific standards. In disaster victim identification scenarios, fleshed feet are often recovered in footwear; footprints are another potential source of trace evidence found at crime scenes. In medico-legal investigations, feet and footprints can be useful for extrapolating living height, it is thus expedient to determine whether sex can be estimated from the same anthropometric data. The aim of the present study is to develop accurate sex estimation standards for a contemporary Western Australian population from measurements of the feet and footprints. The sample comprises 200 adults (90 males, 110 females). Three bilateral linear measurements were taken from each foot and seven bilateral measurements were acquired from static footprints obtained using a Podograph. A precision test was first conducted to assess data accuracy and reliability. Measurement data are then analysed using a range of parametric statistical tests. Results show that males were significantly (P<0.001) larger than females for all foot and footprint measurements; cross-validated sex classification accuracies ranged from 71% to 91%. Although in many instances the sex bias was large (>±5%), this study provides viable alternatives for estimating sex in Western Australian individuals with accuracy equivalent to established standards developed from foot bones. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Neuromuscular and technical abilities related to age in water-polo players.

PubMed

De Siati, Fabio; Laffaye, Guillaume; Gatta, Giorgio; Dello Iacono, Antonio; Ardigò, Luca Paolo; Padulo, Johnny

2016-08-01

Testing is one of the important tasks in any multi-step sport programme. In most ball games, coaches assess motor, physical and technical skills on a regular basis in early stages of talent identification in order to further athletes' development. The purpose of the study was to investigate anthropometric variables and vertical jump heights as a free throw effectiveness predictor in water-polo players of different age groups. Two hundred and thirty-six young (10-18 years) male water-polo players partitioned into three age groups underwent anthropometric variables' measures and squat- and countermovement-jump tests, and performed water-polo free throws. Anthropometric variables, vertical jump heights and throw speed - as a proxy for free throw effectiveness - resulted different over age groups. Particularly, throw speed changed from 9.28 to 13.70 m · s(-1) (+48%) from younger to older players. A multiple-regression model indicated that body height, squat-jump height and throw time together explain 52% of variance of throw speed. In conclusion, tall height, high lower limb power and throwing quickness appeared to be relevant determinants for effective free throws. Such indications can help coaches during talent identification and development processes, even by means of novel training strategies. Further research is needed over different maturity statuses.

Fatigue testing of metric bolts fitted with lip-type nuts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dragoni, E.

This paper addresses the effect of the external shape of lip-type nuts on the fatigue strength of commercial M10 bolts loaded in tension. Evolving from the standard configuration, six nut geometries are compared, characterized by lips of different shape (cylindrical, tapered or both) and length. Testing and statistical treatment of the data are performed in accordance with a JSME standard involving 14 specimens for each geometry. Within the class of merely cylindrical lips, only limited advantages over the standard assembly are detected. In particular, the bolt strength remains mostly unaffected by lengthening of the lip beyond one third of themore » nut height. Conversely, tapering of the lip end so as to thin its wall around the entry section of the bolt results in substantial improvements. In this case, the strength increase is roughly proportional to the taper length. Adoption of a tapered lip covering two thirds of the nut height enhances the bolt strength by about one fourth with respect to the standard geometry.« less

Posture-related distribution of hyperbaric bupivacaine in cerebro-spinal fluid is influenced by spinal needle characteristics.

PubMed

Mardirosoff, C; Dumont, L; Deyaert, M; Leconte, M

2001-07-01

No studies have evaluated the relationship between duration of time sitting and spinal needle type on the maximal spread of local anaesthetics. The few trials available have studied the influence of time spent sitting on the spread of anaesthesia without standardising spinal needle types, and have not found any effect. In this randomised, blinded study, 60 patients scheduled for elective orthopaedic surgery of the lower limbs were divided into 4 groups. With the patient sitting erect, 15 mg hyperbaric bupivacaine were injected in a standard manner through a 24G Sprotte or a 27G Whitacre needle and patients were placed supine after 1 min (24G/1 group and 27G/1 group) or 4 min (24G/4 group and 27G/4 group). Time to achieve maximum block height after injection was similar in all groups. Block height levels were significantly lower at all time points for the 24G/4 group. Maximum block heights were Th4 in the 24G/1, 27G/1 and 27G/4 groups, and Th6 in the 24G/4 group (P<0.0001). In a standard spinal anaesthesia procedure, when different lengths of time spent sitting are compared, spinal needle characteristics influence the maximum spread of hyperbaric bupivacaine. However, within the limits of our study, a two-segment difference in block height is too small to consider using spinal needles as valuable tools to control block height during spinal anaesthesia in our daily practice.

Three-dimensional endoanal ultrasound is accurate and reproducible in determining type and height of anal fistulas.

PubMed

Kołodziejczak, M; Santoro, G A; Obcowska, A; Lorenc, Z; Mańczak, M; Sudoł-Szopińska, I

2017-04-01

Surgical treatment of high anal fistulas is associated with the potential risk of faecal incontinence and recurrence. The primary aim of this study was to determine the accuracy of three-dimensional endoanal ultrasound (3D-EAUS) in the assessment of height and type of anal fistulas, compared to the intra-operative findings (gold standard). The secondary aim was to evaluate the inter-observer reproducibility of 3D-EAUS. The study design was a prospective analysis of retrospective data. 299 patients (202 men), mean age 45.3 years, who underwent surgery for anal fistulas, were included. All patients were preoperatively assessed by 3D-EAUS. Two readers independently reviewed the volumes to determine the type and height of fistulas. Sensitivity, specificity, positive and negative predictive values, proportion of agreements and Cohen's kappa coefficient (κ) were calculated for both examiners. Ultrasound findings were compared with intra-operative data (reference standard), evaluated blindly by the surgeons. At surgery, 201 (67%) were transsphincteric, 49 (16%) suprasphincteric, 47 (16%) intersphincteric and two (1%) extrasphincteric fistulas. Intra-operatively, 177 (59%) were low and 122 (41%) high fistulas. The overall accuracy of 3D-EAUS was 91% for fistula type (271/299 fistulas: 97% transsphincteric, 100% intersphincteric, 57% suprasphincteric, 0% extrasphincteric) and 92% for fistula height (275/299 fistulas: 80% high and 100% low). Both readers reported very good agreement with surgery in the assessment of fistula type (proportion of agreement 0.88, κ = 0.89) and height (proportion of agreement 0.90, κ = 0.91). 3D-EAUS is an accurate and reproducible modality for the assessment of type and height of anal fistulas. Colorectal Disease © 2016 The Association of Coloproctology of Great Britain and Ireland.

Characteristics of nocturnal coastal boundary layer in Ahtopol based on averaged SODAR profiles

NASA Astrophysics Data System (ADS)

Barantiev, Damyan; Batchvarova, Ekaterina; Novitzky, Mikhail

2014-05-01

The ground-based remote sensing instruments allow studying the wind regime and the turbulent characteristics of the atmosphere with height, achieving new knowledge and solving practical problems, such as air quality assessments, mesoscale models evaluation with high resolution data, characterization of the exchange processes between the surface and the atmosphere, the climate comfort conditions and the risk for extreme events, etc. Very important parameter in such studies is the height of the atmospheric boundary layer. Acoustic remote sensing data of the coastal atmospheric boundary layer were explored based on over 4-years continuous measurements at the meteorological observatory of Ahtopol (Bulgarian Southern Black Sea Coast) under Bulgarian - Russian scientific agreement. Profiles of 12 parameters from a mid-range acoustic sounding instrument type SCINTEC MFAS are derived and averaged up to about 600 m according filtering based on wind direction (land or sea type of night fowls). From the whole investigated period of 1454 days with 10-minute resolution SODAR data 2296 profiles represented night marine air masses and 1975 profiles represented the night flow from land during the months May to September. Graphics of averaged profiles of 12 SODAR output parameters with different availability of data in height are analyzed for both cases. A marine boundary-layer height of about 300 m is identified in the profiles of standard deviation of vertical wind speed (σw), Turbulent Kinetic Energy (TKE) and eddy dissipation rate (EDR). A nocturnal boundary-layer height of about 420 m was identified from the profiles of the same parameters under flows from land condition. In addition, the Buoyancy Production (BP= σw3/z) profiles were calculated from the standard deviation of the vertical wind speed and the height z above ground.

Compensatory-step training of healthy, mobile people with unilateral, transfemoral or knee disarticulation amputations: A potential intervention for trip-related falls.

PubMed

Crenshaw, Jeremy R; Kaufman, Kenton R; Grabiner, Mark D

2013-07-01

The purpose of this study was to evaluate the effects of compensatory-step training of healthy, mobile, young-to-middle aged people with unilateral, transfemoral or knee disarticulation amputations. Outcomes of interest included recovery success, reliance on the prosthesis, and the kinematic variables relevant to trip recovery. Over the course of six training sessions, five subjects responded to postural disturbances that necessitated forward compensatory steps to avoid falling. Subjects improved their ability to recover from these postural disturbances without falling or hopping on the non-prosthetic limb. Subjects improved their compensatory stepping response by decreasing trunk flexion and increasing the sagittal plane distance between the body center of mass and the stepping foot. In response to more challenging disturbances, these training-related improvements were not observed for the initial step with the non-prosthetic limb. Regardless of the stepping limb, step length and the change in pelvic height were not responsive to training. This study exhibits the potential benefits of a compensatory-step training program for amputees and informs future improvements to the protocol. Copyright © 2013 Elsevier B.V. All rights reserved.

Winding Pack Height Management During Fabrication of the ITER CS Module

NASA Astrophysics Data System (ADS)

Martovetsky, Nicolai N.; Irick, David K.; Reed, Richard P.; Haefelfinger, Rolf; Salazar, Erica

The Central Solenoid (CS) stack consists of six modules, 2.1 m tall each [1]. In order to verify good impregnation, we performed a vacuum pressure impregnation (VPI) test of a full cross section of the CS module (CSM), 40 conductors tall and 14 conductors wide [2]. It was discovered that after preparation of the full cross section stack until completion of the VPI, the stack shrunk in height by 20-25 mm. Our study of the literature and discussions with the leading experts in VPI did not reveal obvious reasons for this change of height, so we launched a study to address this issue. We assembled two 12x1 (tall by wide) arrays and several 7x1 arrays in order to study characteristics of the dry winding pack under compressive force and effects of different fabrication steps. Then we impregnated these arrays in different conditions under compressive force and studied change of height as a result of compression, impregnation, gelling and curing of the stack of insulated conductors. We showed that by controlling the application of the compressive force, before closing the mold and during impregnation, one can reduce the height uncertainty. Most of the height reduction takes place while the glass is dry under the dead weight and the applied compressive force. Reduction of height during injection of the resin and during gelling, curing and cooling of the coil is noticeable, reproducible and relatively small. The paper presents results of our studies and recommendations for assembly and VPI of tall windings.

Inverted Polarity Thunderstorms Linked with Elevated Cloud Base Height

NASA Astrophysics Data System (ADS)

Cummins, K. L.; Williams, E.

2016-12-01

The great majority of thunderstorms worldwide exhibit gross positive dipole structure, produce intracloud lightning that reduces this positive dipole (positive intracloud flashes), and produce negative cloud-to-ground lightning from the lower negative end of this dipole. During the STEPS experiment in 2000 much new evidence for thunderstorms (or cells within multi-cellular storms) with inverted polarity came to light, both from balloon soundings of electric field and from LMA analysis. Many of the storms with inverted polarity cells developed in eastern Colorado. Fleenor et al. (2009) followed up after STEPS to document a dominance of positive polarity CG lightning in many of these cases. In the present study, surface thermodynamic observations (temperature and dew point temperature) have been used to estimate the cloud base heights and temperatures at the time of the Fleenor et al. lightning observations. It was found that when more than 90% of the observed CG lightning polarity within a storm is negative, the cloud base heights were low (2000 m AGL or lower, and warmer, with T>10 C), and when more than 90% of the observed CG lightning within a storm was positive, the cloud base heights were high (3000 m AGL or higher, and colder, with T< 2 C). Multi-cellular storms or temporally-evolving storms with mixed polarity were generally associated with intermediate cloud base heights. These findings on inverted polarity thunderstorms are remarkably consistent with results in other parts of the world where strong instability prevails in the presence of high cloud base height: the plateau regions of China (Liu et al., 1989; Qie et al., 2005), and in pre-monsoon India (Pawar et al., 2016), particularly when mixed polarity cases are excluded. Calculations of adiabatic cloud water content for lifting from near 0 oC cast some doubt on earlier speculation (Williams et al., 2005) that the graupel particles in these inverted polarity storms attain a wet growth condition, and so exhibit positive charging following laboratory experiments. This mechanism will be contrasted with the possibility of positive graupel charging associated with small droplet sizes (consistent with high cloud base) or through involvement of ice nuclei (Pawar et al., 2016) in the semiarid environments that frequently accompany inverted polarity storms.

Electrical Conductivity through a Single Atomic Step Measured with the Proximity-Induced Superconducting Pair Correlation

DOE PAGES

Kim, Howon; Lin, Shi -Zeng; Graf, Matthias J.; ...

2016-09-08

Local disordered nanostructures in an atomically thick metallic layer on a semiconducting substrate play significant and decisive roles in transport properties of two-dimensional (2D) conductive systems. We measured the electrical conductivity through a step of monoatomic height in a truly microscopic manner by using as a signal the superconducting pair correlation induced by the proximity effect. The transport property across a step of a one-monolayer Pb surface metallic phase, formed on a Si(111) substrate, was evaluated by inducing the pair correlation around the local defect and measuring its response, i.e., the reduced density of states at the Fermi energy usingmore » scanning tunneling microscopy. We found that the step resistance has a significant contribution to the total resistance on a nominally flat surface. Our study also revealed that steps in the 2D metallic layer terminate the propagation of the pair correlation. Furthermore, superconductivity is enhanced between the first surface step and the superconductor–normal-metal interface by reflectionless tunneling when the step is located within a coherence length.« less

Electrical Conductivity through a Single Atomic Step Measured with the Proximity-Induced Superconducting Pair Correlation.

PubMed

Kim, Howon; Lin, Shi-Zeng; Graf, Matthias J; Miyata, Yoshinori; Nagai, Yuki; Kato, Takeo; Hasegawa, Yukio

2016-09-09

Local disordered nanostructures in an atomically thick metallic layer on a semiconducting substrate play significant and decisive roles in transport properties of two-dimensional (2D) conductive systems. We measured the electrical conductivity through a step of monoatomic height in a truly microscopic manner by using as a signal the superconducting pair correlation induced by the proximity effect. The transport property across a step of a one-monolayer Pb surface metallic phase, formed on a Si(111) substrate, was evaluated by inducing the pair correlation around the local defect and measuring its response, i.e., the reduced density of states at the Fermi energy using scanning tunneling microscopy. We found that the step resistance has a significant contribution to the total resistance on a nominally flat surface. Our study also revealed that steps in the 2D metallic layer terminate the propagation of the pair correlation. Superconductivity is enhanced between the first surface step and the superconductor-normal-metal interface by reflectionless tunneling when the step is located within a coherence length.

Health, height, and history: an overview of recent developments in anthropometric history.

PubMed

Harris, B

1994-08-01

This paper examines some of the major developments in the field of anthropometric history since the end of the 1970s. The first two sections of the paper consider the conceptual basis of anthropometric history and the relationship between height and the standard of living. Sections 3-7 discuss the contributions made by anthropometric historians to our understanding of the social and economic history of the United States, the history of American slavery, the social history of the United Kingdom, the origins of Habsburg industrialization, and the standard of living in nineteenth-century Sweden. The concluding section summarizes the impact of anthropometric history and identifies a number of areas for further research.

Growth and body composition in Brazilian female rhythmic gymnastics athletes.

PubMed

Camargo, Cristiane Teixeira Amaral; Gomez-Campos, Rossana Anelice; Cossio-Bolaños, Marco Antonio; Barbeta, Vinicius Justino De Oliveira; Arruda, Miguel; Guerra-Junior, Gil

2014-01-01

The aim was to analyse the physical growth and body composition of rhythmic gymnastics athletes relative to their level of somatic maturation. This was a cross-sectional study of 136 athletes on 23 teams from Brazil. Mass, standing height and sitting height were measured. Fat-free and fat masses, body fat percentages and ages of the predicted peak height velocity (PHV) were calculated. The z scores for mass were negative during all ages according to both WHO and Brazilian references, and that for standing height were also negative for all ages according to WHO reference but only until 12 years old according to Brazilian reference. The mean age of the predicted PHV was 12.1 years. The mean mass, standing and sitting heights, body fat percentage, fat-free mass and fat mass increased significantly until 4 to 5 years after the age of the PHV. Menarche was reached in only 26% of these athletes and mean age was 13.2 years. The mass was below the national reference standards, and the standing height was below only for the international reference, but they also had late recovery of mass and standing height during puberty. In conclusion, these athletes had a potential to gain mass and standing height several years after PHV, indicating late maturation.

Effects of Whole-body Vibration Training on Sprint Running Kinematics and Explosive Strength Performance

PubMed Central

Giorgos, Paradisis; Elias, Zacharogiannis

2007-01-01

The aim of this study was to investigate the effect of 6 wk of whole body vibration (WBV) training on sprint running kinematics and explosive strength performance. Twenty-four volunteers (12 women and 12 men) participated in the study and were randomised (n = 12) into the experimental and control groups. The WBV group performed a 6-wk program (16-30 min·d-1, 3 times a week) on a vibration platform. The amplitude of the vibration platform was 2.5 mm and the acceleration was 2.28 g. The control group did not participate in any training. Tests were performed Pre and post the training period. Sprint running performance was measured during a 60 m sprint where running time, running speed, step length and step rate were calculated. Explosive strength performance was measured during a counter movement jump (CMJ) test, where jump height and total number of jumps performed in a period of 30 s (30CVJT). Performance in 10 m, 20 m, 40 m, 50 m and 60 m improved significantly after 6 wk of WBV training with an overall improvement of 2.7%. The step length and running speed improved by 5.1% and 3.6%, and the step rate decreased by 3.4%. The countermovement jump height increased by 3.3%, and the explosive strength endurance improved overall by 7.8%. The WBV training period of 6 wk produced significant changes in sprint running kinematics and explosive strength performance. Key pointsWBV training.Sprint running kinematics.Explosive strength performance PMID:24149223

DEFICIENT LIMB SUPPORT IS A MAJOR CONTRIBUTOR TO AGE-DIFFERENCES IN FALLING

PubMed Central

Pavol, Michael J.; Pai, Yi-Chung

2010-01-01

Older adults are more likely than young to fall upon a loss of balance, yet the factors responsible for this difference are not well understood. This study investigated whether age-related differences in movement stability, limb support, and reactive stepping contribute to the greater likelihood of falling among older adults. Sixty young and 41 older, safety-harnessed, healthy adults were exposed to a novel and unexpected forward slip during a sit-to-stand task. More older than young adults fell (76% vs. 30%). Falls in both age groups were related to lesser stability and lower hip height at first step touchdown, with 97.1% of slip outcomes correctly classified based on these variables. Decreases in hip height at touchdown had over 20 times greater effect on the odds of falling than equivalent decreases in stability. Three age-differences placed older adults at greater risk of falling: older adults had lower and more slowly rising hips at slip onset, they were less likely to respond to slipping with forceful limb extension, and they placed their stepping foot less posterior to their center of mass. The first two differences, each associated with deficient limb support, reduced hip ascent and increased hip descent. The third difference resulted in lesser stability at step touchdown. These results suggest that deficient limb support in normal movement patterns and in the reactive response to a perturbation is a major contributor to the high incidence of falls in older adults. Improving proactive and reactive limb support should be a focus of fall prevention efforts. PMID:16876174

Deficient limb support is a major contributor to age differences in falling.

PubMed

Pavol, Michael J; Pai, Yi-Chung

2007-01-01

Older adults are more likely than young to fall upon a loss of balance, yet the factors responsible for this difference are not well understood. This study investigated whether age-related differences in movement stability, limb support, and protective stepping contribute to the greater likelihood of falling among older adults. Sixty young and 41 older, safety-harnessed, healthy adults were exposed to a novel and unexpected forward slip during a sit-to-stand task. More older than young adults fell (76% vs. 30%). Falls in both age groups were related to lesser stability and lower hip height at first step touchdown, with 97.1% of slip outcomes correctly classified based on these variables. Decreases in hip height at touchdown had over 20 times greater effect on the odds of falling than equivalent decreases in stability. Three age differences placed older adults at greater risk of falling: older adults had lower and more slowly rising hips at slip onset, they were less likely to respond to slipping with ample limb support, and they placed their stepping foot less posterior to their center of mass. The first two differences, each associated with deficient limb support, reduced hip ascent and increased hip descent. The third difference resulted in lesser stability at step touchdown. These results suggest that deficient limb support in normal movement patterns and in the reactive response to a perturbation is a major contributor to the high incidence of falls in older adults. Improving proactive and reactive limb support should be a focus of fall prevention efforts.

Sex differences in knee joint loading: Cross-sectional study in geriatric population.

PubMed

Ro, Du Hyun; Lee, Dong Yeon; Moon, Giho; Lee, Sahnghoon; Seo, Sang Gyo; Kim, Seong Hwan; Park, In Woong; Lee, Myung Chul

2017-06-01

This study investigated sex differences in knee biomechanics and investigated determinants for difference in a geriatric population. Age-matched healthy volunteers (42 males and 42 females, average age 65 years) without knee OA were included in the study. Subjects underwent physical examination on their knee and standing full-limb radiography for anthropometric measurements. Linear, kinetic, and kinematic parameters were compared using a three-dimensional, 12-camera motion capture system. Gait parameters were evaluated and determinants for sex difference were evaluated with multiple regression analysis. Females had a higher peak knee adduction moment (KAM) during gait (p = 0.004). Females had relatively wider pelvis and narrower step width (both p < 0.001). However, coronal knee alignment was not significantly different between the sexes. Multiple regression analysis revealed that coronal alignment (b = 0.014, p < 0.001), step width (b = -0.010, p = 0.011), and pelvic width/height ratio (b = 1.703, p = 0.046) were significant determinants of peak KAM. Because coronal alignment was not different between the sexes, narrow step width and high pelvic width/height ratio of female were the main contributors to higher peak KAM in females. Sex differences in knee biomechanics were present in the geriatric population. Increased mechanical loading on the female knee, which was associated with narrow step width and wide pelvis, may play an important role in future development and progression of OA. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1283-1289, 2017. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

"A Body Shape Index" in middle-age and older Indonesian population: scaling exponents and association with incident hypertension.

PubMed

Cheung, Yin Bun

2014-01-01

"A Body Shape Index" (ABSI) is a recently proposed index that standardizes waist circumference for body mass index (BMI) and height. This study aims to: (a) examine if the ABSI scaling exponents for standardizing waist circumference for BMI and height are valid in middle-aged and older Indonesian population, and (b) compare the association between incident hypertension and ABSI and other anthropometric measures. The Indonesian Family Life Survey Wave 3 measured anthropometric variables and blood pressure of 8255 adults aged between 40 to 85 years in 2000. The relationship between two anthropometric quantities, e.g. weight (w) and height (h), can be expressed as the power law-equivalent [Formula: see text], where p = 2 is the scaling exponent in the derivation of the BMI and can be estimated by linear regression analysis. This was extended to the regression analysis of the log-transformed waist circumference, weight and height to establish the scaling exponents in the ABSI. The values for men were similar to those developed by the previous American study, which were 2/3 (BMI) and 1/2 (height). Those for women were somewhat smaller, at 3/5 (BMI) and 1/5 (height). The original (American) ABSI leads to mild negative correlation with BMI (-0.14) and height (-0.12) in the female population. Analysis of the development of hypertension between Waves 3 and 4 (average interval 7.5 years) in relation to ABSI measured at Wave 3 showed stronger association if the locally derived (Indonesian) scaling exponents were used. However, both versions of the ABSI were less associated with incident hypertension than waist circumference and BMI. The values for the scaling exponents for ABSI are roughly similar between the American population and the middle-aged and older Indonesian population, although larger discrepancy was found in women. The ABSI is less associated with incident hypertension than waist circumference and BMI.

A simple parameterization for the height of maximum ozone heating rate

NASA Astrophysics Data System (ADS)

Zhang, Feng; Hou, Can; Li, Jiangnan; Liu, Renqiang; Liu, Cuiping

2017-12-01

It is well-known that the height of the maximum ozone heating rate is much higher than the height of the maximum ozone concentration in the stratosphere. However, it lacks an analytical expression to explain it. A simple theoretical model has been proposed to calculate the height of maximum ozone heating rate and further understand this phenomenon. Strong absorption of ozone causes the incoming solar flux to be largely attenuated before reaching the location of the maximum ozone concentration. By comparing with the exact radiative transfer calculations, the heights of the maximum ozone heating rate produced by the theoretical model are generally very close to the true values. When the cosine of solar zenith angle μ0 = 1.0 , in US Standard atmosphere, the heights of the maximum ozone heating rate by the theoretical model are 41.4 km in the band 0.204-0.233 μm, 47.9 km in the band 0.233-0.270 μm, 44.5 km in the band 0.270-0.286 μm, 37.1 km in the band 0.286-0.303 μm, and 30.2 km in the band 0.303-0.323 μm, respectively. The location of the maximum ozone heating rate is sensitive to the solar spectral range. In band 1, the heights of the maximum ozone heating rate by the theoretical model are 52.3 km for μ0 = 0.1 , 47.1 km for μ0 = 0.3 , 44.6 km for μ0 = 0.5 , 43.1 km for μ0 = 0.7 , 41.9 km for μ0 = 0.9 , 41.4 km for μ0 = 1.0 in US Standard atmosphere, respectively. This model also illustrates that the location of the maximum ozone heating rate is sensitive to the solar zenith angle.

Temperature dependence of current-and capacitance-voltage characteristics of an Au/4H-SiC Schottky diode

NASA Astrophysics Data System (ADS)

Gülnahar, Murat

2014-12-01

In this study, the current-voltage (I-V) and capacitance-voltage (C-V) measurements of an Au/4H-SiC Schottky diode are characterized as a function of the temperature in 50-300 K temperature range. The experimental parameters such as ideality factor and apparent barrier height presents to be strongly temperature dependent, that is, the ideality factor increases and the apparent barrier height decreases with decreasing temperature, whereas the barrier height values increase with the temperature for C-V data. Likewise, the Richardson plot deviates at low temperatures. These anomaly behaviors observed for Au/4H-SiC are attributed to Schottky barrier inhomogeneities. The barrier anomaly which relates to interface of Au/4H-SiC is also confirmed by the C-V measurements versus the frequency measured in 300 K and it is interpreted by both Tung's lateral inhomogeneity model and multi-Gaussian distribution approach. The values of the weighting coefficients, standard deviations and mean barrier height are calculated for each distribution region of Au/4H-SiC using the multi-Gaussian distribution approach. In addition, the total effective area of the patches NAe is obtained at separate temperatures and as a result, it is expressed that the low barrier regions influence meaningfully to the current transport at the junction. The homogeneous barrier height value is calculated from the correlation between the ideality factor and barrier height and it is noted that the values of standard deviation from ideality factor versus q/3kT curve are in close agreement with the values obtained from the barrier height versus q/2kT variation. As a result, it can be concluded that the temperature dependent electrical characteristics of Au/4H-SiC can be successfully commented on the basis of the thermionic emission theory with both models.

Iranian Special Library Standards.

ERIC Educational Resources Information Center

Harvey, John F.

The purposes of these standards are: (1) to suggest the steps necessary for the establishment of special libraries; (2) for those recently established, to suggest the steps necessary to achieve satisfactory performance levels in all areas, and finally, (3) for well established libraries, to suggest the steps necessary to achieve excellence. These…

Catch-up growth assessment in long-term physically neglected and emotionally abused preschool age male children.

PubMed

Oliván, Gonzalo

2003-01-01

To assess the catch-up growth of long-term physically neglected and emotionally abused preschool male children who have entered foster residential care and remained 1 year after initial placement. Longitudinal study over a 7-year period (1994-2001). So that a child was eligible for the study, three selection criteria were included: (1) aged between 24 and 48 months at the time of entry into residential facility, (2) having suffered both long-term (more than 6 months) physically neglected and emotionally abused, and (3) having stayed in foster care for 1 year after initial placement. Weight, height, and head circumference were established upon entry and re-assessed 1 year after initial placement, calculating the annual growth velocity. Results were compared with normal regional longitudinal standards of reference (Z score). Student's t test was used to assess statistically significant differences. During the study period, 87 children aged between 24 and 48 months (54 male/33 female) were admitted to residential facility after having suffered both long-term physical neglect and emotional abuse. Nevertheless, only 20 children (23% of the total admissions) met the third selection criteria (having remained 1 year after initial placement). Of these children, all were males and at placement they were between the ages of 30 and 42 months, with an average age of 36 months (1.9 SD). At placement, the analyzed parameters were below the normal standards, showing a statistically significant difference for height (Z score = -1.29; p = .008) and weight (Z score = -.75; p = .038). The annual growth velocity for all parameters was above the normal standards showing a statistically significant difference for height (Z score = +1.43; p = .009). One year after initial placement, the significant differences for height (Z score = -.68; p = .102) and weight (Z score = -.31; p = .435) with respect to the normal standards disappeared, though still remained below, showing a significant catch-up growth for height (improvement height Z = +.61 SD). At placement, the both long-term physically neglected and emotionally abused preschool age male children showed a mild form of chronic malnutrition with growth failure. Growth failure was reversible after the first year of stay, which demonstrates that this delay in growth was secondary to nutritional and psychosocial factors. Placement in foster residential care was beneficial for the catch-up growth of these patients. Copyright 2002 Elsevier Science Ltd.

Genetically-Predicted Adult Height and Alzheimer's Disease.

PubMed

Larsson, Susanna C; Traylor, Matthew; Burgess, Stephen; Markus, Hugh S

2017-01-01

Observational studies have linked increased adult height with better cognitive performance and reduced risk of Alzheimer's disease (AD). It is unclear whether the associations are due to shared biological processes that influence height and AD or due to confounding by early life exposures or environmental factors. To use a genetic approach to investigate the association between adult height and AD. We selected 682 single nucleotide polymorphisms (SNPs) associated with height at genome-wide significance (p < 5×10-8) in the Genetic Investigation of ANthropometric Traits (GIANT) consortium. Summary statistics for each of these SNPs on AD were obtained from the International Genomics of Alzheimer's Project (IGAP) of 17,008 individuals with AD and 37,154 controls. The estimate of the association between genetically predicted height and AD was calculated using the inverse-variance weighted method. The odds ratio of AD was 0.91 (95% confidence interval, 0.86-0.95; p = 9.8×10-5) per one standard deviation increase (about 6.5 cm) in genetically predicted height based on 682 SNPs, which were clustered in 419 loci. In an analysis restricted to one SNP from each height-associated locus (n = 419 SNPs), the corresponding OR was 0.92 (95% confidence interval, 0.86-0.97; p = 4.8×10-3). This finding suggests that biological processes that influence adult height may have a role in the etiology of AD.

A fixed full-matrix method for determining ice sheet height change from satellite altimeter: an ENVISAT case study in East Antarctica with backscatter analysis

NASA Astrophysics Data System (ADS)

Yang, Yuande; Hwang, Cheinway; E, Dongchen

2014-09-01

A new method, called the fixed full-matrix method (FFM), is used to compute height changes at crossovers of satellite altimeter ground tracks. Using the ENVISAT data in East Antarctica, FFM results in crossovers of altimeter heights that are 1.9 and 79 times more than those from the fixed half method (FHM) and the one-row method (ORM). The mean standard error of height changes is about 14 cm from ORM, which is reduced to 7 cm by FHM and to 3 cm by FFM. Unlike FHM, FFM leads to uniform errors in the first-half and second-half height-change time series. FFM has the advantage in improving the accuracy of the change of height and backscattered power over ORM and FHM. Assisted by the ICESat-derived height changes, we determine the optimal threshold correlation coefficient (TCC) for a best correction for the backscatter effect on ENVISAT height changes. The TCC value of 0.92 yields an optimal result for FFM. With this value, FFM yields ENVISAT-derived height change rates in East Antarctica mostly falling between and 3 cm/year, and matching the ICESat result to 0.94 cm/year. The ENVISAT result will provide a constraint on the current mass balance result along the Chinese expedition route CHINARE.

Assessing and Adapting LiDAR-Derived Pit-Free Canopy Height Model Algorithm for Sites with Varying Vegetation Structure

NASA Astrophysics Data System (ADS)

Scholl, V.; Hulslander, D.; Goulden, T.; Wasser, L. A.

2015-12-01

Spatial and temporal monitoring of vegetation structure is important to the ecological community. Airborne Light Detection and Ranging (LiDAR) systems are used to efficiently survey large forested areas. From LiDAR data, three-dimensional models of forests called canopy height models (CHMs) are generated and used to estimate tree height. A common problem associated with CHMs is data pits, where LiDAR pulses penetrate the top of the canopy, leading to an underestimation of vegetation height. The National Ecological Observatory Network (NEON) currently implements an algorithm to reduce data pit frequency, which requires two height threshold parameters, increment size and range ceiling. CHMs are produced at a series of height increments up to a height range ceiling and combined to produce a CHM with reduced pits (referred to as a "pit-free" CHM). The current implementation uses static values for the height increment and ceiling (5 and 15 meters, respectively). To facilitate the generation of accurate pit-free CHMs across diverse NEON sites with varying vegetation structure, the impacts of adjusting the height threshold parameters were investigated through development of an algorithm which dynamically selects the height increment and ceiling. A series of pit-free CHMs were generated using three height range ceilings and four height increment values for three ecologically different sites. Height threshold parameters were found to change CHM-derived tree heights up to 36% compared to original CHMs. The extent of the parameters' influence on modelled tree heights was greater than expected, which will be considered during future CHM data product development at NEON. (A) Aerial image of Harvard National Forest, (B) standard CHM containing pits, appearing as black speckles, (C) a pit-free CHM created with the static algorithm implementation, and (D) a pit-free CHM created through varying the height threshold ceiling up to 82 m and the increment to 1 m.

Near-adult height in male kidney transplant recipients started on growth hormone treatment in late puberty.

PubMed

Gil, Silvia; Aziz, Mariana; Adragna, Marta; Monteverde, Marta; Belgorosky, Alicia

2018-01-01

Growth retardation and its impact on adult height is considered to be one of the most common complications in patients with chronic kidney disease (CKD). Treatment with recombinant human growth hormone (rhGH) has been effective in improving growth in kidney transplantation (KTx) patients, but little data are available on adult height in patients who began rhGh treatment in late puberty. Near-adult height was evaluated in 13 KTx patients treated with rhGH [growth hormone group (GHGr); dose 9.33 mg/m 2 per week] for a period of at least 18 months. At initiation of rhGH treatment, testicular volume was >8 ml and serum testosterone was >1 ng/ml compared with the control group (CGr) of ten KTx patients who did not receive rHGH. All subjects were of similar chronological age and bone age and had similar creatinine clearance (CrCl) levels, cumulative corticoid dose, height standard deviation score (SDS), target height SDS, and target height:initial height at the beginning of the study. Near-adult height was significantly greater in the GHGr than in the CGr (-1.8 ± 0.8 vs. -2.9 ± 1.1; p = 0.018). The difference between initial height and near-adult height in the GHGr revealed a significant height gain (initial height -3.1 ± 1.1; near-adult height -1.8 ± 0.8 SDS, respectively; delta 1.2 ± 0.3; p = 0.021). The CrCl level was not significantly different between the GHGr and CGr at either at study initiation or when attaining near-adult height (p = 0.74 and p = 0.23, respectively). Treatment with rhGH was effective in improving adult height in KTx patients who began treatment in late puberty, without any effect on renal function.

THE SCHOOL PLANT GUIDE FOR PLANNING SCHOOL PLANTS OF PENNSYLVANIA. ARCHITECTURAL DESIGN REQUIREMENTS AND GENERAL, ELECTRIC, HEATING AND VENTILATING, AND PLUMBING STANDARDS.

ERIC Educational Resources Information Center

Pennsylvania State Dept. of Public Instruction, Harrisburg.

A GUIDE COVERING ARCHITECTURAL DESIGN REQUIREMENTS, ELECTRIC, HEATING AND VENTILATING, AND PLUMBING STANDARDS AS APPROVED BY THE STATE BOARD OF EDUCATION IN 1966. THE FOLLOWING MINIMUM STANDARD FOR NEW BUILDING, ALTERATIONS, AND ADDITIONS ARE OUTLINED--(1) SPATIAL ENVIRONMENTAL FACTORS, SUCH AS CEILING HEIGHTS, INTERIOR SANITARY FACILITIES, ROOMS…

46 CFR 163.002-5 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... load means the sum of the weights of— (1) The rigid ladder or lift platform, the suspension cables (if... persons capacity of the hoist; (c) Lift height means the distance from the lowest step of the pilot ladder... (2) If the hoist does not have suspension cables, the ladder or lift platform is in its lowest...

46 CFR 163.002-5 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... load means the sum of the weights of— (1) The rigid ladder or lift platform, the suspension cables (if... persons capacity of the hoist; (c) Lift height means the distance from the lowest step of the pilot ladder... (2) If the hoist does not have suspension cables, the ladder or lift platform is in its lowest...

To designate the facility of the United States Postal Service located at 16300 Broadway Avenue in Maple Heights, Ohio, as the "Daniel Kondas Post Office".

THOMAS, 112th Congress

Rep. Fudge, Marcia L. [D-OH-11

2011-05-02

House - 05/13/2011 Referred to the Subcommittee on Federal Workforce, U.S. Postal Service, and Labor Policy . (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Fruit Heights Land Conveyance Act

THOMAS, 113th Congress

Rep. Bishop, Rob [R-UT-1

2013-03-06

Senate - 07/30/2013 Committee on Energy and Natural Resources Subcommittee on Public Lands, Forests, and Mining. Hearings held. (All Actions) Notes: For further action, see H.R.3979, which became Public Law 113-291 on 12/19/2014. Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Region-based automatic building and forest change detection on Cartosat-1 stereo imagery

NASA Astrophysics Data System (ADS)

Tian, J.; Reinartz, P.; d'Angelo, P.; Ehlers, M.

2013-05-01

In this paper a novel region-based method is proposed for change detection using space borne panchromatic Cartosat-1 stereo imagery. In the first step, Digital Surface Models (DSMs) from two dates are generated by semi-global matching. The geometric lateral resolution of the DSMs is 5 m × 5 m and the height accuracy is in the range of approximately 3 m (RMSE). In the second step, mean-shift segmentation is applied on the orthorectified images of two dates to obtain initial regions. A region intersection following a merging strategy is proposed to get minimum change regions and multi-level change vectors are extracted for these regions. Finally change detection is achieved by combining these features with weighted change vector analysis. The result evaluations demonstrate that the applied DSM generation method is well suited for Cartosat-1 imagery, and the extracted height values can largely improve the change detection accuracy, moreover it is shown that the proposed change detection method can be used robustly for both forest and industrial areas.

Gas phase hydrolysis of formaldehyde to form methanediol: impact of formic acid catalysis.

PubMed

Hazra, Montu K; Francisco, Joseph S; Sinha, Amitabha

2013-11-21

We find that formic acid (FA) is very effective at facilitating diol formation through its ability to reduce the barrier for the formaldehyde (HCHO) hydrolysis reaction. The rate limiting step in the mechanism involves the isomerization of a prereactive collision complex formed through either the HCHO···H2O + FA and/or HCHO + FA···H2O pathways. The present study finds that the effective barrier height, defined as the difference between the zero-point vibrational energy (ZPE) corrected energy of the transition state (TS) and the HCHO···H2O + FA and HCHO + FA···H2O starting reagents, are respectively only ∼1 and ∼4 kcal/mol. These barriers are substantially lower than the ∼17 kcal/mol barrier associated with the corresponding step in the hydrolysis of HCHO catalyzed by a single water molecule (HCHO + H2O + H2O). The significantly lower barrier heights for the formic acid catalyzed pathway reveal a new important role that organic acids play in the gas phase hydrolysis of atmospheric carbonyl compounds.

Econometric analysis of the changing effects in wind strength and significant wave height on the probability of casualty in shipping.

PubMed

Knapp, Sabine; Kumar, Shashi; Sakurada, Yuri; Shen, Jiajun

2011-05-01

This study uses econometric models to measure the effect of significant wave height and wind strength on the probability of casualty and tests whether these effects changed. While both effects are in particular relevant for stability and strength calculations of vessels, it is also helpful for the development of ship construction standards in general to counteract increased risk resulting from changing oceanographic conditions. The authors analyzed a unique dataset of 3.2 million observations from 20,729 individual vessels in the North Atlantic and Arctic regions gathered during the period 1979-2007. The results show that although there is a seasonal pattern in the probability of casualty especially during the winter months, the effect of wind strength and significant wave height do not follow the same seasonal pattern. Additionally, over time, significant wave height shows an increasing effect in January, March, May and October while wind strength shows a decreasing effect, especially in January, March and May. The models can be used to simulate relationships and help understand the relationships. This is of particular interest to naval architects and ship designers as well as multilateral agencies such as the International Maritime Organization (IMO) that establish global standards in ship design and construction. Copyright © 2011 Elsevier Ltd. All rights reserved.

Effect of antipronation foot orthosis geometry on compression of heel and arch soft tissues.

PubMed

Sweeney, Declan; Nester, Christopher; Preece, Stephen; Mickle, Karen

2015-01-01

This study aimed to understand how systematic changes in arch height and two designs of heel wedging affect soft tissues under the foot. Soft tissue thickness under the heel and navicular was measured using ultrasound. Heel pad thickness was measured when subjects were standing on a flat surface and standing on an orthosis with 4 and 8 degree extrinsic wedges and 4 mm and 8 mm intrinsic wedges (n = 27). Arch soft tissue thickness was measured when subjects were standing and when standing on an orthosis with -6 mm, standard, and +6 mm increments in arch height (n = 25). Extrinsic and intrinsic heel wedges significantly increased soft tissue thickness under the heel compared with no orthosis. The 4 and 8 degree extrinsic wedges increased tissue thickness by 28% and 27.6%, respectively, while the 4 mm and 8 mm intrinsic wedges increased thickness by 23% and 14.6%, respectively. Orthotic arch height significantly affected arch soft tissue thickness. Compared with the no orthosis condition, the -6 mm, standard, and +6 mm arch heights decreased arch tissue thickness by 9%, 10%, and 11.8%, respectively. This study demonstrates that change in orthotic geometry creates different plantar soft tissue responses that we expect to affect transmission of force to underlying foot bones.

The social context of children's nutritional status in rural South Africa1

PubMed Central

MADHAVAN, SANGEETHA; TOWNSEND, NICHOLAS

2010-01-01

Aim: To investigate the relationship between children's nutritional status and a series of measures capturing both the current status and the lifetime history of their connection with adult caregivers in the Agincourt sub-district of rural South Africa. Methods: Using data on a sample of 202 children from a recent ethnographic study of children's social connections and well-being, the authors (1) compare height for age and weight for age to an accepted international standard and (2) conduct bivariate analyses of the relationships between selected measures of social connection and extreme deviations below expected weight and expected height. Results: Fitted curves for weight for age and height for age fall between the 5th and 50th percentiles of CDC growth curves. Compromised nutrition, defined as being more than two standard deviations below expected height or weight, is associated with the death or non-co-residence of the mother, and with the absence of financial support from the father. The co-residence of maternal female kin as substitutes for the mother do not fully compensate for her absence. Conclusions: The findings highlight the importance of parental living arrangements, parental financial support, birth order and the composition of sibling sets, and lifetime residential patterns in facilitating access to nutrition. PMID:17676511

Variation of the channel temperature in the transmission of lightning leader

NASA Astrophysics Data System (ADS)

Chang, Xuan; Yuan, Ping; Cen, Jianyong; Wang, Xuejuan

2017-06-01

According to the time-resolved spectra of the lightning stepped leader and dart leader processes, the channel temperature, its evolution characteristics with time and the variation along the channel height in the transmission process were analyzed. The results show that the stepped leader tip has a slightly higher temperature than the trailing end, which should be caused by a large amount of electric charges on the leader tip. In addition, both temperature and brightness are enhanced at the position of the channel node. The dart leader has a higher channel temperature than the stepped leader but a lower temperature than the return stroke. Meanwhile, the channel temperature of the dart leader obviously increases when the dart leader propagates to the ground.

Klein tunneling in the α -T3 model

NASA Astrophysics Data System (ADS)

Illes, E.; Nicol, E. J.

2017-06-01

We investigate Klein tunneling for the α -T3 model, which interpolates between graphene and the dice lattice via parameter α . We study transmission across two types of electrostatic interfaces: sharp potential steps and sharp potential barriers. We find both interfaces to be perfectly transparent for normal incidence for the full range of the parameter α for both interfaces. For other angles of incidence, we find that transmission is enhanced with increasing α . For the dice lattice, we find perfect, all-angle transmission across a potential step for incoming electrons with energy equal to half of the height of the potential step. This is analogous to the "super", all-angle transmission reported for the dice lattice for Klein tunneling across a potential barrier.

Physical modeling of the atmospheric boundary layer in the UNH Flow Physics Facility

NASA Astrophysics Data System (ADS)

Taylor-Power, Gregory; Gilooly, Stephanie; Wosnik, Martin; Klewicki, Joe; Turner, John

2016-11-01

The Flow Physics Facility (FPF) at UNH has test section dimensions W =6.0m, H =2.7m, L =72m. It can achieve high Reynolds number boundary layers, enabling turbulent boundary layer, wind energy and wind engineering research with exceptional spatial and temporal instrument resolution. We examined the FPF's ability to experimentally simulate different types of the atmospheric boundary layer (ABL) using upstream roughness arrays. The American Society for Civil Engineers defines standards for simulating ABLs for different terrain types, from open sea to dense city areas (ASCE 49-12). The standards require the boundary layer to match a power law shape, roughness height, and power spectral density criteria. Each boundary layer type has a corresponding power law exponent and roughness height. The exponent and roughness height both increase with increasing roughness. A suburban boundary layer was chosen for simulation and a roughness element fetch was created. Several fetch lengths were experimented with and the resulting boundary layers were measured and compared to standards in ASCE 49-12: Wind Tunnel Testing for Buildings and Other Structures. Pitot tube and hot wire anemometers were used to measure average and fluctuating flow characteristics. Velocity profiles, turbulence intensity and velocity spectra were found to compare favorably.

Measurement of intrahepatic pressure during radiofrequency ablation in porcine liver.

PubMed

Kawamoto, Chiaki; Yamauchi, Atsushi; Baba, Yoko; Kaneko, Keiko; Yakabi, Koji

2010-04-01

To identify the most effective procedures to avoid increased intrahepatic pressure during radiofrequency ablation, we evaluated different ablation methods. Laparotomy was performed in 19 pigs. Intrahepatic pressure was monitored using an invasive blood pressure monitor. Radiofrequency ablation was performed as follows: single-step standard ablation; single-step at 30 W; single-step at 70 W; 4-step at 30 W; 8-step at 30 W; 8-step at 70 W; and cooled-tip. The array was fully deployed in single-step methods. In the multi-step methods, the array was gradually deployed in four or eight steps. With the cooled-tip, ablation was performed by increasing output by 10 W/min, starting at 40 W. Intrahepatic pressure was as follows: single-step standard ablation, 154.5 +/- 30.9 mmHg; single-step at 30 W, 34.2 +/- 20.0 mmHg; single-step at 70 W, 46.7 +/- 24.3 mmHg; 4-step at 30 W, 42.3 +/- 17.9 mmHg; 8-step at 30 W, 24.1 +/- 18.2 mmHg; 8-step at 70 W, 47.5 +/- 31.5 mmHg; and cooled-tip, 114.5 +/- 16.6 mmHg. The radiofrequency ablation-induced area was spherical with single-step standard ablation, 4-step at 30 W, and 8-step at 30 W. Conversely, the ablated area was irregular with single-step at 30 W, single-step at 70 W, and 8-step at 70 W. The ablation time was significantly shorter for the multi-step method than for the single-step method. Increased intrahepatic pressure could be controlled using multi-step methods. From the shapes of the ablation area, 30-W 8-step expansions appear to be most suitable for radiofrequency ablation.

Investigation of obstacle effect to improve conjugate heat transfer in backward facing step channel using fast simulation of incompressible flow

NASA Astrophysics Data System (ADS)

Nouri-Borujerdi, Ali; Moazezi, Arash

2018-01-01

The current study investigates the conjugate heat transfer characteristics for laminar flow in backward facing step channel. All of the channel walls are insulated except the lower thick wall under a constant temperature. The upper wall includes a insulated obstacle perpendicular to flow direction. The effect of obstacle height and location on the fluid flow and heat transfer are numerically explored for the Reynolds number in the range of 10 ≤ Re ≤ 300. Incompressible Navier-Stokes and thermal energy equations are solved simultaneously in fluid region by the upwind compact finite difference scheme based on flux-difference splitting in conjunction with artificial compressibility method. In the thick wall, the energy equation is obtained by Laplace equation. A multi-block approach is used to perform parallel computing to reduce the CPU time. Each block is modeled separately by sharing boundary conditions with neighbors. The developed program for modeling was written in FORTRAN language with OpenMP API. The obtained results showed that using of the multi-block parallel computing method is a simple robust scheme with high performance and high-order accurate. Moreover, the obtained results demonstrated that the increment of Reynolds number and obstacle height as well as decrement of horizontal distance between the obstacle and the step improve the heat transfer.

Variation in lung volumes and capacities among young males in relation to height.

PubMed

Bhatti, Urooj; Rani, Keenjher; Memon, Muhammad Qasim

2014-01-01

Vital Capacity (VC) is defined as a change in volume of lung after maximal inspiration followed by maximal expiration is called Vital Capacity of lungs. It is the sum of tidal volume, inspiratory reserve volume .and expiratory reserve volume. Vital capacity of normal adults ranges between 3 to 5 litres. A number of physiological factors like age, gender, height and ethnicity effect lung volumes. The reference values of lung volume and capacities were calculated previously and those studies played pivotal role in establishing the fact that air volume capacities measured in an individual fall within a wide range among healthy persons of same age, gender and height buit with different ethnicity. The objective of this study was to evaluate the changes in vital capacity in with height and gender. This cross-sectional study included 74 male students in the Department of Physiology, Liaquat University of Medical and Health Sciences, Jamshoro during January-March, 2014. The volunteers were divided into 2 groups of height ≤ 167.4 cm and > 167.4 cm. The volunteers' height was measured in cm. Vital capacity of the subjects was measured using standard protocol. Mean ± SD of age, height and vital capacity were calculated. Mean vital capacity in students with height > 167.4 cm was higher than average vital capacity of students with height ≤ 167.4 cm. It might be due to the increased surface area of the lungs in relation with increasing height. There are variations in vital capacity of individuals in relation to their heights, within the same ethnic and age groups.

Bedform response to flow variability

USGS Publications Warehouse

Nelson, J.M.; Logan, B.L.; Kinzel, P.J.; Shimizu, Y.; Giri, S.; Shreve, R.L.; McLean, S.R.

2011-01-01

Laboratory observations and computational results for the response of bedform fields to rapid variations in discharge are compared and discussed. The simple case considered here begins with a relatively low discharge over a flat bed on which bedforms are initiated, followed by a short high-flow period with double the original discharge, during which the morphology of the bedforms adjusts, followed in turn by a relatively long period of the original low discharge. For the grain size and hydraulic conditions selected, the Froude number remains subcritical during the experiment, and sediment moves predominantly as bedload. Observations show rapid development of quasi-two-dimensional bedforms during the initial period of low flow with increasing wavelength and height over the initial low-flow period. When the flow increases, the bedforms rapidly increase in wavelength and height, as expected from other empirical results. When the flow decreases back to the original discharge, the height of the bedforms quickly decreases in response, but the wavelength decreases much more slowly. Computational results using an unsteady two-dimensional flow model coupled to a disequilibrium bedload transport model for the same conditions simulate the formation and initial growth of the bedforms fairly accurately and also predict an increase in dimensions during the high-flow period. However, the computational model predicts a much slower rate of wavelength increase, and also performs less accurately during the final low-flow period, where the wavelength remains essentially constant, rather than decreasing. In addition, the numerical results show less variability in bedform wavelength and height than the measured values; the bedform shape is also somewhat different. Based on observations, these discrepancies may result from the simplified model for sediment particle step lengths used in the computational approach. Experiments show that the particle step length varies spatially and temporally over the bedforms during the evolution process. Assuming a constant value for the step length neglects the role of flow alterations in the bedload sediment-transport process, which appears to result in predicted bedform wavelength changes smaller than those observed. However, observations also suggest that three-dimensional effects play at least some role in the decrease of bedform wavelength, so incorporating better models for particle hop lengths alone may not be sufficient to improve model predictions. ?? 2011 John Wiley & Sons, Ltd.

Head Circumference and Height in Autism

PubMed Central

Lainhart, Janet E.; Bigler, Erin D.; Bocian, Maureen; Coon, Hilary; Dinh, Elena; Dawson, Geraldine; Deutsch, Curtis K.; Dunn, Michelle; Estes, Annette; Tager-Flusberg, Helen; Folstein, Susan; Hepburn, Susan; Hyman, Susan; McMahon, William; Minshew, Nancy; Munson, Jeff; Osann, Kathy; Ozonoff, Sally; Rodier, Patricia; Rogers, Sally; Sigman, Marian; Spence, M. Anne; Stodgell, Christopher J.; Volkmar, Fred

2016-01-01

Data from 10 sites of the NICHD/NIDCD Collaborative Programs of Excellence in Autism were combined to study the distribution of head circumference and relationship to demographic and clinical variables. Three hundred thirty-eight probands with autism-spectrum disorder (ASD) including 208 probands with autism were studied along with 147 parents, 149 siblings, and typically developing controls. ASDs were diagnosed, and head circumference and clinical variables measured in a standardized manner across all sites. All subjects with autism met ADI-R, ADOS-G, DSM-IV, and ICD-10 criteria. The results show the distribution of standardized head circumference in autism is normal in shape, and the mean, variance, and rate of macrocephaly but not microcephaly are increased. Head circumference tends to be large relative to height in autism. No site, gender, age, SES, verbal, or non-verbal IQ effects were present in the autism sample. In addition to autism itself, standardized height and average parental head circumference were the most important factors predicting head circumference in individuals with autism. Mean standardized head circumference and rates of macrocephaly were similar in probands with autism and their parents. Increased head circumference was associated with a higher (more severe) ADI-R social algorithm score. Macrocephaly is associated with delayed onset of language. Although mean head circumference and rates of macrocephaly are increased in autism, a high degree of variability is present, underscoring the complex clinical heterogeneity of the disorder. The wide distribution of head circumference in autism has major implications for genetic, neuroimaging, and other neurobiological research. PMID:17022081

Height system unification based on the Fixed Geodetic Boundary Value Problem with limited availability of gravity data

NASA Astrophysics Data System (ADS)

Porz, Lucas; Grombein, Thomas; Seitz, Kurt; Heck, Bernhard; Wenzel, Friedemann

2017-04-01

Regional height reference systems are generally related to individual vertical datums defined by specific tide gauges. The discrepancies of these vertical datums with respect to a unified global datum cause height system biases that range in an order of 1-2 m at a global scale. One approach for unification of height systems relates to the solution of a Geodetic Boundary Value Problem (GBVP). In particular, the fixed GBVP, using gravity disturbances as boundary values, is solved at GNSS/leveling benchmarks, whereupon height datum offsets can be estimated by least squares adjustment. In spherical approximation, the solution of the fixed GBVP is obtained by Hotine's spherical integral formula. However, this method relies on the global availability of gravity data. In practice, gravity data of the necessary resolution and accuracy is not accessible globally. Thus, the integration is restricted to an area within the vicinity of the computation points. The resulting truncation error can reach several meters in height, making height system unification without further consideration of this effect unfeasible. This study analyzes methods for reducing the truncation error by combining terrestrial gravity data with satellite-based global geopotential models and by modifying the integral kernel in order to accelerate the convergence of the resulting potential. For this purpose, EGM2008-derived gravity functionals are used as pseudo-observations to be integrated numerically. Geopotential models of different spectral degrees are implemented using a remove-restore-scheme. Three types of modification are applied to the Hotine-kernel and the convergence of the resulting potential is analyzed. In a further step, the impact of these operations on the estimation of height datum offsets is investigated within a closed loop simulation. A minimum integration radius in combination with a specific modification of the Hotine-kernel is suggested in order to achieve sub-cm accuracy for the estimation of height datum offsets.

Gait Pattern Alterations during Walking, Texting and Walking and Texting during Cognitively Distractive Tasks while Negotiating Common Pedestrian Obstacles

PubMed Central

Licence, Sammy; Smith, Robynne; McGuigan, Miranda P.; Earnest, Conrad P.

2015-01-01

Objectives Mobile phone texting is a common daily occurrence with a paucity of research examining corresponding gait characteristics. To date, most studies have participants walk in a straight line vs. overcoming barriers and obstacles that occur during regular walking. The aim of our study is to examine the effect of mobile phone texting during periods of cognitive distraction while walking and negotiating barriers synonymous with pedestrian traffic. Methods Thirty participants (18-50y) completed three randomized, counter-balanced walking tasks over a course during: (1) normal walking (control), (2) texting and walking, and (3) texting and walking whilst being cognitively distraction via a standard mathematical test performed while negotiating the obstacle course. We analyzed gait characteristics during course negotiation using a 3-dimensional motion analysis system and a general linear model and Dunnet-Hsu post-hoc procedure the normal walking condition to assess gait characteristic differences. Primary outcomes included the overall time to complete the course time and barrier contact. Secondary outcomes included obstacle clearance height, step frequency, step time, double support phase and lateral deviation. Results Participants took significantly longer (mean ± SD) to complete the course while texting (24.96±4.20 sec) and during cognitive distraction COG (24.09±3.36 sec) vs. normal walking (19.32±2.28 sec; all, P<0.001). No significant differences were noted for barrier contacts (P = 0.28). Step frequency, step time, double support phase and lateral deviation all increased in duration during the texting and cognitive distraction trial. Texting and being cognitively distracted also increased obstacle clearance versus the walking condition (all, P<0.02). Conclusions Texting while walking and/or being cognitively distracted significantly affect gait characteristics concordant to mobile phone usage resulting in a more cautious gate pattern. Future research should also examine a similar study in older participants who may be at a greater risk of tripping with such walking deviations. PMID:26222430

VO2max Testing in Trail Runners: Is There a Specific Exercise Test Protocol?

PubMed

Scheer, Volker; Ramme, Katharina; Reinsberger, Claus; Heitkamp, Hans-Christian

2018-06-01

Trail running places specific physiological demands on the human body due to its uphill and downhill running sections. We developed and investigated a more sport-specific trail exercise test protocol (inclination and speed incremental protocol), and compared it to two standard exercise test protocols (horizontal step and ramp protocol) in thirteen highly trained trail runners (age 31±6 years, height 179±6.4 cm, weight 69.2±7.9 kg, BMI 21.6±2.1 kg/m 2 ). The maximum oxygen uptake (VO 2 max) measured during the trail test (62.5±5.9 ml·kg -1 ·min -1 , [95% CI: 59.0-66.1]) was significantly higher compared to both the step test (60.1±5.3 ml·kg -1 ·min -1 , [95% CI: 56.8-63.3], p=0.024) and the ramp test (59.7±5.5 ml·kg -1 ·min -1 , [95% CI: 56.4-63.0], p=0.028). Time to task failure was significantly shorter in the trail test (557±73 s, [95% CI: 512-601]) compared to both the step test (1378±152 s, [95% CI: 1286-1470], p<0.001) and the ramp test (605±95, [95% CI: 547-662], p<0.001). Other physiological measurements obtained were similar. The trail test was the preferred choice in our group of trail runners. This study supports the implementation of the trail test in practice, and recommends that its validity be evaluated further. © Georg Thieme Verlag KG Stuttgart · New York.

Geometric Accuracy Analysis of Worlddem in Relation to AW3D30, Srtm and Aster GDEM2

NASA Astrophysics Data System (ADS)

Bayburt, S.; Kurtak, A. B.; Büyüksalih, G.; Jacobsen, K.

2017-05-01

In a project area close to Istanbul the quality of WorldDEM, AW3D30, SRTM DSM and ASTER GDEM2 have been analyzed in relation to a reference aerial LiDAR DEM and to each other. The random and the systematic height errors have been separated. The absolute offset for all height models in X, Y and Z is within the expectation. The shifts have been respected in advance for a satisfying estimation of the random error component. All height models are influenced by some tilts, different in size. In addition systematic deformations can be seen not influencing the standard deviation too much. The delivery of WorldDEM includes information about the height error map which is based on the interferometric phase errors, and the number and location of coverage's from different orbits. A dependency of the height accuracy from the height error map information and the number of coverage's can be seen, but it is smaller as expected. WorldDEM is more accurate as the other investigated height models and with 10 m point spacing it includes more morphologic details, visible at contour lines. The morphologic details are close to the details based on the LiDAR digital surface model (DSM). As usual a dependency of the accuracy from the terrain slope can be seen. In forest areas the canopy definition of InSAR X- and C-band height models as well as for the height models based on optical satellite images is not the same as the height definition by LiDAR. In addition the interferometric phase uncertainty over forest areas is larger. Both effects lead to lower height accuracy in forest areas, also visible in the height error map.

Anthropometry and Standards for Wheeled Mobility: An International Comparison

ERIC Educational Resources Information Center

Steinfeld, Edward; Maisel, Jordana; Feathers, David; D'Souza, Clive

2010-01-01

Space requirements for accommodating wheeled mobility devices and their users in the built environment are key components of standards for accessible design. These requirements typically include dimensions for clear floor areas, maneuvering clearances, seat and knee clearance heights, as well as some reference dimensions on wheeled mobility device…

76 FR 43265 - Proposed Information Collection; Comment Request; Evacuation Movement and Behavior Questionnaire

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Proposed Information... Standards and Technology (NIST). ACTION: Notice. SUMMARY: The Department of Commerce, as part of its... varying heights (e.g., 1-10 stories, 11-20 stories, 21-35 stories, and 35+ stories) and of varying...

Accuracy of height estimation and tidal volume setting using anthropometric formulas in an ICU Caucasian population.

PubMed

L'her, Erwan; Martin-Babau, Jérôme; Lellouche, François

2016-12-01

Knowledge of patients' height is essential for daily practice in the intensive care unit. However, actual height measurements are unavailable on a daily routine in the ICU and measured height in the supine position and/or visual estimates may lack consistency. Clinicians do need simple and rapid methods to estimate the patients' height, especially in short height and/or obese patients. The objectives of the study were to evaluate several anthropometric formulas for height estimation on healthy volunteers and to test whether several of these estimates will help tidal volume setting in ICU patients. This was a prospective, observational study in a medical intensive care unit of a university hospital. During the first phase of the study, eight limb measurements were performed on 60 healthy volunteers and 18 height estimation formulas were tested. During the second phase, four height estimates were performed on 60 consecutive ICU patients under mechanical ventilation. In the 60 healthy volunteers, actual height was well correlated with the gold standard, measured height in the erect position. Correlation was low between actual and calculated height, using the hand's length and width, the index, or the foot equations. The Chumlea method and its simplified version, performed in the supine position, provided adequate estimates. In the 60 ICU patients, calculated height using the simplified Chumlea method was well correlated with measured height (r = 0.78; ∂ < 1 %). Ulna and tibia estimates also provided valuable estimates. All these height estimates allowed calculating IBW or PBW that were significantly different from the patients' actual weight on admission. In most cases, tidal volume set according to these estimates was lower than what would have been set using the actual weight. When actual height is unavailable in ICU patients undergoing mechanical ventilation, alternative anthropometric methods to obtain patient's height based on lower leg and on forearm measurements could be useful to facilitate the application of protective mechanical ventilation in a Caucasian ICU population. The simplified Chumlea method is easy to achieve in a bed-ridden patient and provides accurate height estimates, with a low bias.

Anti-nuclear autoantibodies in the general German population: prevalence and lack of association with selected cardiovascular and metabolic disorders-findings of a multicenter population-based study.

PubMed

Akmatov, Manas K; Röber, Nadja; Ahrens, Wolfgang; Flesch-Janys, Dieter; Fricke, Julia; Greiser, Halina; Günther, Kathrin; Kaaks, Rudolf; Kemmling, Yvonne; Krone, Bastian; Linseisen, Jakob; Meisinger, Christa; Moebus, Susanne; Obi, Nadia; Guzman, Carlos A; Conrad, Karsten; Pessler, Frank

2017-06-06

We determined the prevalence of anti-nuclear autoantibodies (ANAs) in the German adult population and examined the association between ANAs and cardiovascular and metabolic disorders. We used data and blood samples from the pretest phases of the German National Cohort, obtained from six of the 18 study centers (n = 1199). All centers applied standardized instruments including face-to-face interviews, anthropometric measurements and collection of blood samples. Self-reported histories of diabetes mellitus, heart attack and elevated blood cholesterol and/or lipids were recorded. Height, weight and blood pressure were measured. ANAs were detected using a semi-automated system (AKLIDES®; Medipan GmbH, Dahlewitz, Germany). A positive ANA was defined as a titer ≥ 1:80. ANA were classified as weakly (1:80 or 1:160), moderately (1:320 or 1:640) or strongly (≥1:1280) positive. Specific autoantibodies against nuclear antigens were detected with second-step assays according to the ANA staining pattern. Associations between the assessed disorders and ANA positivity and pattern were examined using sex and age-adjusted mixed-effects logistic regression models. Thirty-three percent (95% confidence interval; 31-36%) of the 1196 participants (measurements could not be obtained from three samples) were ANA positive (titer ≥ 1:80). The proportions of weakly, moderately and strongly positive ANA were 29%, 3.3% and 1.3%, respectively. ANA positivity was more common among women than men across all titers (χ 2 , p = 0.03). ANA positivity, even when stratified according to height of titer or immunofluorescent pattern, was not associated with diabetes, elevated blood cholesterol and/or lipids, obesity or hypertension. Second-step autoantibody assays were positive in 41 of the 83 samples (49%) tested, with anti-DFS70 (n = 13) and anti-dsDNA (n = 7) being most frequent. These subgroups were too small to test for associations with the disorders assessed. The prevalence of ANA positivity in the German general population was similar to values reported from other countries. Contrary to other studies, there was no association with selected self-reported and objectively measured cardiovascular and metabolic variables.

Design principle for improved three-dimensional ac electro-osmotic pumps

NASA Astrophysics Data System (ADS)

Burch, Damian; Bazant, Martin Z.

2008-05-01

Three-dimensional (3D) ac electro-osmotic (ACEO) pumps have recently been developed that are much faster and more robust than previous planar designs. The basic idea is to create a “fluid conveyor belt” by placing opposing ACEO slip velocities at different heights. Current designs involve electrodes with electroplated steps, whose heights have been optimized in simulations and experiments. Here, we consider changing the boundary conditions—rather than the geometry—and predict that flow rates can be further doubled by fabricating 3D features with nonpolarizable materials. This amplifies the fluid conveyor belt by removing opposing flows on the vertical surfaces, and it increases the slip velocities that drive the flow.

Design principle for improved three-dimensional ac electro-osmotic pumps.

PubMed

Burch, Damian; Bazant, Martin Z

2008-05-01

Three-dimensional (3D) ac electro-osmotic (ACEO) pumps have recently been developed that are much faster and more robust than previous planar designs. The basic idea is to create a "fluid conveyor belt" by placing opposing ACEO slip velocities at different heights. Current designs involve electrodes with electroplated steps, whose heights have been optimized in simulations and experiments. Here, we consider changing the boundary conditions-rather than the geometry-and predict that flow rates can be further doubled by fabricating 3D features with nonpolarizable materials. This amplifies the fluid conveyor belt by removing opposing flows on the vertical surfaces, and it increases the slip velocities that drive the flow.

SAMPLING OSCILLOSCOPE

DOEpatents

Sugarman, R.M.

1960-08-30

An oscilloscope is designed for displaying transient signal waveforms having random time and amplitude distributions. The oscilloscopc is a sampling device that selects for display a portion of only those waveforms having a particular range of amplitudes. For this purpose a pulse-height analyzer is provided to screen the pulses. A variable voltage-level shifter and a time-scale rampvoltage generator take the pulse height relative to the start of the waveform. The variable voltage shifter produces a voltage level raised one step for each sequential signal waveform to be sampled and this results in an unsmeared record of input signal waveforms. Appropriate delay devices permit each sample waveform to pass its peak amplitude before the circuit selects it for display.

Comparison of step-by-step kinematics of resisted, assisted and unloaded 20-m sprint runs.

PubMed

van den Tillaar, Roland; Gamble, Paul

2018-03-26

This investigation examined step-by-step kinematics of sprint running acceleration. Using a randomised counterbalanced approach, 37 female team handball players (age 17.8 ± 1.6 years, body mass 69.6 ± 9.1 kg, height 1.74 ± 0.06 m) performed resisted, assisted and unloaded 20-m sprints within a single session. 20-m sprint times and step velocity, as well as step length, step frequency, contact and flight times of each step were evaluated for each condition with a laser gun and an infrared mat. Almost all measured parameters were altered for each step under the resisted and assisted sprint conditions (η 2  ≥ 0.28). The exception was step frequency, which did not differ between assisted and normal sprints. Contact time, flight time and step frequency at almost each step were different between 'fast' vs. 'slow' sub-groups (η 2  ≥ 0.22). Nevertheless overall both groups responded similarly to the respective sprint conditions. No significant differences in step length were observed between groups for the respective condition. It is possible that continued exposure to assisted sprinting might allow the female team-sports players studied to adapt their coordination to the 'over-speed' condition and increase step frequency. It is notable that step-by-step kinematics in these sprints were easy to obtain using relatively inexpensive equipment with possibilities of direct feedback.

Fiber-optic projected-fringe digital interferometry

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Beheim, Glenn

1990-01-01

A phase-stepped projected-fringe interferometer was developed which uses a closed-loop fiber-optic phase-control system to make very accurate surface profile measurements. The closed-loop phase-control system greatly reduces phase-stepping error, which is frequently the dominant source of error in digital interferometers. Two beams emitted from a fiber-optic coupler are combined to form an interference fringe pattern on a diffusely reflecting object. Reflections off of the fibers' output faces are used to create a phase-indicating signal for the closed-loop optical phase controller. The controller steps the phase difference between the two beams by pi/2 radians in order to determine the object's surface profile using a solid-state camera and a computer. The system combines the ease of alignment and automated data reduction of phase-stepping projected-fringe interferometry with the greatly improved phase-stepping accuracy of our closed-loop phase-controller. The system is demonstrated by measuring the profile of a plate containing several convex surfaces whose heights range from 15 to 25 micron high.

Experimental study of combustion in a turbulent free shear layer formed at a rearward facing step

NASA Technical Reports Server (NTRS)

Pitz, R. W.; Daily, J. W.

1981-01-01

A premixed propane-air flame is stabilized in a turbulent free shear layer formed at a rearward facing step. The mean and rms averages of the turbulent velocity flow field are determined by LDV for both reacting (equivalence ratio 0.57) and nonreacting flows (Reynolds number 15,000-37,000 based on step height). The effect of combustion is to shift the layer toward the recirculation zone and reduce the flame spread. For reacting flow, the growth rate is unchanged except very near the step. The probability density function of the velocity is bimodial near the origin of the reacting layer and single-peaked but often skewed elsewhere. Large-scale structures dominate the reacting shear layer. Measurements of their passing frequency from LDV are consistent with high-speed Schlieren movies of the reacting layer and indicate that the coalescence rate of the eddies in the shear layer is reduced by combustion.

Antireflective surface with a step in the taper: Numerical optimization and large-area fabrication

NASA Astrophysics Data System (ADS)

Shinotsuka, Kei; Hongo, Koki; Dai, Kotaro; Hirama, Satoru; Hatta, Yoshihisa

2017-02-01

In this study, we developed a practical method to improve the optical performance of subwavelength antireflective two-dimensional (2D) gratings. A numerical simulation of both convex and concave paraboloids suggested that surface reflectivity drastically decreases when a step is introduced in the taper. The optimum height and depth of a step provided average reflectances of 0.098% for convex protrusions and 0.040% for concave protrusions in the visible range. Furthermore, a stepped paraboloid was experimentally fabricated by dry etching of a Si substrate with SiO2 particle monolayer mask. A cyclo-olefin polymer (COP) reverse replica (concave) imprinted by the Si mold exhibited a measured reflectance of 0.077% on average in the visible range. It was also demonstrated that the antireflective structure was fabricated on the whole surface of a 6 in. Si wafer, which is a sufficient size for industrial utilization.

Flight-measured base pressure coefficients for thick boundary-layer flow over an aft-facing step for Mach numbers from 0.4 to 2.5

NASA Technical Reports Server (NTRS)

Goecke, S. A.

1973-01-01

A 0.56-inch thick aft-facing step was located 52.1 feet from the leading edge of the left wing of an XB-70 airplane. A boundary-layer rake at a mirror location on the right wing was used to obtain local flow properties. Reynolds numbers were near 10 to the 8th power, resulting in a relatively thick boundary-layer. The momentum thickness ranged from slightly thinner to slightly thicker than the step height. Surface static pressures forward of the step were obtained for Mach numbers near 0.9, 1.5, 2.0, and 2.4. The data were compared with thin boundary-layer results from flight and wind-tunnel experiments and semiempirical relationships. Significant differences were found between the thick and the thin boundary-layer data.

Height Measuring System On Video Using Otsu Method

NASA Astrophysics Data System (ADS)

Sandy, C. L. M.; Meiyanti, R.

2017-01-01

A measurement of height is comparing the value of the magnitude of an object with a standard measuring tool. The problems that exist in the measurement are still the use of a simple apparatus in which one of them is by using a meter. This method requires a relatively long time. To overcome these problems, this research aims to create software with image processing that is used for the measurement of height. And subsequent that image is tested, where the object captured by the video camera can be known so that the height of the object can be measured using the learning method of Otsu. The system was built using Delphi 7 of Vision Lab VCL 4.5 component. To increase the quality of work of the system in future research, the developed system can be combined with other methods.

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. P. Jensen; Toto, T.

Standard Atmospheric Radiation Measurement (ARM) Climate Research Facility sounding files provide atmospheric state data in one dimension of increasing time and height per sonde launch. Many applications require a quick estimate of the atmospheric state at higher time resolution. The INTERPOLATEDSONDE (i.e., Interpolated Sounding) Value-Added Product (VAP) transforms sounding data into continuous daily files on a fixed time-height grid, at 1-minute time resolution, on 332 levels, from the surface up to a limit of approximately 40 km. The grid extends that high so the full height of soundings can be captured; however, most soundings terminate at an altitude between 25more » and 30 km, above which no data is provided. Between soundings, the VAP linearly interpolates atmospheric state variables in time for each height level. In addition, INTERPOLATEDSONDE provides relative humidity scaled to microwave radiometer (MWR) observations.« less

Time trends: a ten-year comparison (2005-2015) of pedometer-determined physical activity and obesity in Czech preschool children.

PubMed

Sigmund, Erik; Sigmundová, Dagmar; Badura, Petr; Trhlíková, Lucie; Gecková, Andrea Madarasová

2016-07-13

To explore the time trends (2005-2015) of pedometer-determined weekday and weekend physical activity (PA) and obesity prevalence in 4-7-year-old Czech preschool children and changes in proportion of kindergarten vs. leisure-time PA. The study compared data of two cross-sectional cohorts of preschool children (2005: 92 boys and 84 girls; 2015: 105 boys and 87 girls) in the Czech Republic, using the same measurements and procedures in both cases. PA was monitored by the Yamax Digiwalker SW-200 pedometer for at least eight continuous hours a day over seven consecutive days. Body weight and height were measured using calibrated Tanita scales and anthropometry. The analysis of variance was conducted to examine the gender and cohort effect on step counts. The t-test was used to examine the difference in step counts in kindergarten (or leisure-time) between non-obese and obese children, and the chi-square test compared the prevalence of obesity between 2005 and 2015. The steps/day (mean ± standard deviation) of preschoolers was significantly higher (p < 0.05) in 2015 (11,739 ± 4,229 steps/day) than in 2005 (10,922 ± 3,181 steps/day); and (p < 0.001) in boys (11,939 ± 3,855 steps/day) than in girls (10,668 ± 3,587 steps/day). In 2015, girls, but not boys, had a significantly (p < 0.01) greater step count on weekdays than in 2005, but not at weekends. A decline of leisure-time step counts on weekdays between 2005 and 2015 in girls (6,8652005 vs. 6,0592015, p < 0.01) and boys (7,8612005 vs. 6,4362015, p < 0.001) is compensated for by the increase of step counts in kindergarten (girls: 3,0582005 vs. 5,3302015, and boys: 4,0032005 vs. 5,9992015, p < 0.001). The prevalence of obesity was not significantly different either in 2005 or 2015 among preschool girls (7.14 % 2005 vs. 9.20 % 2015) or boys (6.52 % 2005 vs. 9.52 % 2015). The steps/day of preschoolers was higher in 2015 than in 2005; this higher level of PA was the result of increased PA in kindergartens over the last ten years, particularly among girls. Thus, the current PA program in kindergartens effectively compensates for the decline in PA in leisure-time of weekdays of non-obese and obese preschoolers compared to 2005 and 2015. Prevalence of obesity among Czech preschool children remains relatively stable between 2005 and 2015.

Sensitivity of The High-resolution Wam Model With Respect To Time Step

NASA Astrophysics Data System (ADS)

Kasemets, K.; Soomere, T.

The northern part of the Baltic Proper and its subbasins (Bothnian Sea, the Gulf of Finland, Moonsund) serve as a challenge for wave modellers. In difference from the southern and the eastern parts of the Baltic Sea, their coasts are highly irregular and contain many peculiarities with the characteristic horizontal scale of the order of a few kilometres. For example, the northern coast of the Gulf of Finland is extremely ragged and contains a huge number of small islands. Its southern coast is more or less regular but has up to 50m high cliff that is frequently covered by high forests. The area also contains numerous banks that have water depth a couple of meters and that may essentially modify wave properties near the banks owing to topographical effects. This feature suggests that a high-resolution wave model should be applied for the region in question, with a horizontal resolution of an order of 1 km or even less. According to the Courant-Friedrich-Lewy criterion, the integration time step for such models must be of the order of a few tens of seconds. A high-resolution WAM model turns out to be fairly sensitive with respect to the particular choice of the time step. In our experiments, a medium-resolution model for the whole Baltic Sea was used, with the horizontal resolution 3 miles (3' along latitudes and 6' along longitudes) and the angular resolution 12 directions. The model was run with steady wind blowing 20 m/s from different directions and with two time steps (1 and 3 minutes). For most of the wind directions, the rms. difference of significant wave heights calculated with differ- ent time steps did not exceed 10 cm and typically was of the order of a few per cents. The difference arose within a few tens of minutes and generally did not increase in further computations. However, in the case of the north wind, the difference increased nearly monotonously and reached 25-35 cm (10-15%) within three hours of integra- tion whereas mean of significant wave heights over the whole Baltic Sea was 2.4 m (1 minute) and 2.04 m (3 minutes), respectively. The most probable reason of such difference is that the WAM model with a relatively large time step poorly describes wave field evolution in the Aland area with extremely ragged bottom topography and coastal line. In earlier studies, it has been reported that the WAM model frequently underestimates wave heights in the northern Baltic Proper by 20-30% in the case of strong north storms (Tuomi et al, Report series of the Finnish Institute of Marine Re- search, 1999). The described results suggest that a part of this underestimation may be removed through a proper choice of the time step.

Military Enlistment of Hispanic Youth. Obstacles and Opportunities

DTIC Science & Technology

2009-01-01

Weight, by Service, Height, and Gender . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.13. Allowable Body Fat Measurements, by Gender and...has higher minimum weight standards, as seen in Table 2.12. Applicants who exceed the maximum allowed weight are given a body- fat measurement to...determine if they exceed the allowable body- fat standards, as shown in Table 2.13. Despite having the most lenient weight standards, the Marine Corps has

Self-Reported vs Measured Body Mass Indices in Migraineurs

PubMed Central

Katsnelson, Michael J.; Peterlin, B. Lee; Rosso, Andrea L.; Alexander, Guillermo M.; Erwin, Kirsten L.

2014-01-01

Objective To compare and contrast body mass indices calculated based on self-reported height and weight as compared with measured height and weight in migraine patients. Background Obesity is a risk factor for multiple neurological disorders including stroke, dementia, and migraine chronification. In addition, several cytokines and adipocytokines associated with migraine are modulated by body mass. The body mass index (BMI) is a commonly used anthropometric measure to estimate total body fat and is often calculated based on patient’s self-reported height and weight. Methods This was a retrospective study evaluating consecutive migraine patients presenting to a headache clinic. Demographic characteristics and self-reported height and weight were obtained from a standardized questionnaire that each new patient completes upon presentation to the clinic. In addition, as depression has been shown to be associated with both migraine and obesity, information in regards to major depression utilizing the Patient Healthcare Questionnaire-9 was extracted as well. Following completion of the questionnaire, body mass indices are routinely measured, with height measured to the nearest 0.5 inch utilizing a mounted stadiometer, and weight measured with a standard scale to the nearest 0.5 lb. After this information was extracted from the charts, BMI was then calculated for both self-reported and measured body mass indices. Using the measured body mass indices as a standard, this was then compared and contrasted to the patient’s self-reported body mass indices. Results A total of 110 patients were included in the study. Patients were predominantly female (91%) with a mean age of 38.6 ± 11.6 years. Of the total patients included, no significant difference in self-reported height (mean 64.7 ± 3.1 inches) as compared with measured height (mean 64.5 ± 3.4 inches) was seen, P = .463. However, self-reported weight (169 ± 41.3) was underestimated as compared with the measured weight (173.5 ± 43.2), P = .001. And, the self-reported BMI (28.4 ± 6.8) was significantly less than the measured BMI (29.4 ± 7.5), P < .001. Conclusions In our study, the self-reported mean weight and BMI for migraineurs was significantly less than the measured mean weight and BMI, and was of greater magnitude in the obese migraineurs. This suggests that conclusions drawn from studies evaluating obesity utilizing self-reported BMI in migraineurs may undercall the effect of total body obesity. PMID:19472442

International longitudinal pediatric reference standards for bone mineral content.

PubMed

Baxter-Jones, Adam D G; Burrows, Melonie; Bachrach, Laura K; Lloyd, Tom; Petit, Moira; Macdonald, Heather; Mirwald, Robert L; Bailey, Don; McKay, Heather

2010-01-01

To render a diagnosis pediatricians rely upon reference standards for bone mineral density or bone mineral content, which are based on cross-sectional data from a relatively small sample of children. These standards are unable to adequately represent growth in a diverse pediatric population. Thus, the goal of this study was to develop sex and site-specific standards for BMC using longitudinal data collected from four international sites in Canada and the United States. Data from four studies were combined; Saskatchewan Paediatric Bone Mineral Accrual Study (n=251), UBC Healthy Bones Study (n=382); Penn State Young Women's Health Study (n=112) and Stanford's Bone Mineral Accretion study (n=423). Males and females (8 to 25 years) were measured for whole body (WB), total proximal femur (PF), femoral neck (FN) and lumbar spine (LS) BMC (g). Data were analyzed using random effects models. Bland-Altman was used to investigate agreement between predicted and actual data. Age, height, weight and ethnicity independently predicted BMC accrual across sites (P<0.05). Compared to White males, Asian males had 31.8 (6.8) g less WB BMC accrual; Hispanic 75.4 (28.2) g less BMC accrual; Blacks 82.8 (26.3) g more BMC accrual with confounders of age, height and weight controlled. We report similar findings for the PF and FN. Models for females for all sites were similar with age, height and weight as independent significant predictors of BMC accrual (P<0.05). We provide a tool to calculate a child's BMC Z-score, accounting for age, size, sex and ethnicity. In conclusion, when interpreting BMC in pediatrics we recommend standards that are sex, age, size and ethnic specific. Copyright (c) 2009 Elsevier Inc. All rights reserved.

International Longitudinal Paediatric Reference Standards for Bone Mineral Content

PubMed Central

Baxter-Jones, Adam DG; McKay, Heather; Burrows, Melonie; Bachrach, Laura K; Lloyd, Tom; Petit, Moira; Macdonald, Heather; Mirwald, Robert L; Bailey, Don

2014-01-01

To render a diagnosis pediatricians rely upon reference standards for bone mineral density or bone mineral content, which are based on cross-sectional data from a relatively small sample of children. These standards are unable to adequately represent growth in a diverse pediatric population. Thus, the goal of this study was to develop sex and site specific standards for BMC using longitudinal data collected from four international sites in Canada and the United States. Data from four studies were combined; Saskatchewan Paediatric Bone Mineral Accrual Study (n=251), UBC Healthy Bones Study (n=382); Penn State Young Women’s Health Study (n=112) and Stanford’s Bone Mineral Accretion study (n=423). Males and females (8 to 25 years) were measured for whole body (WB), total proximal femur (PF), femoral neck (FN) and lumbar spine (LS) BMC (g). Data were analyzed using random effects models. Bland-Altman was used to investigate agreement in predicted and actual data. Age, height, weight and ethnicity independently predicted BMC accrual across sites (P <0.05). Compared to White males, Asian males had 31.8 (6.8) g less WB BMC accrual; Hispanic 75.4 (28.2) g less BMC accrual; Blacks 82.8 (26.3) g more BMC accrual with confounders of age, height and weight controlled. Similar findings were found for PF and FN. Female models for all sites were similar with age, height and weight all independent significant predictors of BMC accrual (P <0.05). We provide a tool to calculate a child’s BMC Z-score, accounting for age, size, sex and ethnicity. In conclusion, when interpreting BMC in paediatrics we recommend standards that are sex, age, size and ethnic specific. PMID:19854308

Analysis of Schottky Barrier Parameters and Current Transport Properties of V/p-Type GaN Schottky Junction at Low Temperatures

NASA Astrophysics Data System (ADS)

Asha, B.; Harsha, Cirandur Sri; Padma, R.; Rajagopal Reddy, V.

2018-05-01

The electrical characteristics of a V/p-GaN Schottky junction have been investigated by current-voltage (I-V) and capacitance-voltage (C-V) characteristics under the assumption of the thermionic emission (TE) theory in the temperature range of 120-280 K with steps of 40 K. The zero-bias barrier height (ΦB0), ideality factor (n), flat-band barrier height (ΦBF) and series resistance (R S) values were evaluated and were found to be strongly temperature dependent. The results revealed that the ΦB0 values increase, whereas n, ΦFB and R S values decrease, with increasing temperature. Using the conventional Richardson plot, the mean barrier height (0.39 eV) and Richardson constant (8.10 × 10-10 Acm-2 K-2) were attained. The barrier height inhomogeneities were demonstrated by assuming a Gaussian distribution function. The interface state density (N SS) values were found to decrease with increasing temperature. The reverse leakage current mechanism of the V/p-GaN Schottky junction was found to be governed by Poole-Frenkel emission at all temperatures.

Talent identification model for sprinter using discriminant factor

NASA Astrophysics Data System (ADS)

Kusnanik, N. W.; Hariyanto, A.; Herdyanto, Y.; Satia, A.

2018-01-01

The main purpose of this study was to identify young talented sprinter using discriminant factor. The research was conducted in 3 steps including item pool, screening of item pool, and trial of instruments at the small and big size of samples. 315 male elementary school students participated in this study with mean age of 11-13 years old. Data were collected by measuring anthropometry (standing height, sitting height, body mass, and leg length); testing physical fitness (40m sprint for speed, shuttle run for agility, standing broad jump for power, multistage fitness test for endurance). Data were analyzed using discriminant factor. The result of this study found that there were 5 items that selected as an instrument to identify young talented sprinter: sitting height, body mass, leg length, sprint 40m, and multistage fitness test. Model of Discriminant for talent identification in sprinter was D = -24,497 + (0,155 sitting height) + (0,080 body mass) + (0,148 leg length) + (-1,225 Sprint 40m) + (0,563 MFT). The conclusion of this study: instrument tests that have been selected and discriminant model that have been found can be applied to identify young talented as a sprinter.

Ground penetrating radar for asparagus detection

NASA Astrophysics Data System (ADS)

Seyfried, Daniel; Schoebel, Joerg

2016-03-01

Ground penetrating radar is a promising technique for detection of buried objects. Recently, radar has more and more been identified to provide benefits for a plurality of applications, where it can increase efficiency of operation. One of these fields is the industrial automatic harvesting process of asparagus, which is performed so far by cutting the soil ridge at a certain height including all the asparagus spears and subsequently sieving the latter out of the soil. However, the height where the soil is cut is a critical parameter, since a wrong value leads to either damage of the roots of the asparagus plants or to a reduced crop yield as a consequence of too much biomass remaining in the soil. In this paper we present a new approach which utilizes ground penetrating radar for non-invasive sensing in order to obtain information on the optimal height for cutting the soil. Hence, asparagus spears of maximal length can be obtained, while keeping the roots at the same time undamaged. We describe our radar system as well as the subsequent digital signal processing steps utilized for extracting the information required from the recorded radar data, which then can be fed into some harvesting unit for setting up the optimal cutting height.

Unification of Intercontinental Height Systems based on the Fixed Geodetic Boundary Value Problem - A Case Study in Spherical Approximation

NASA Astrophysics Data System (ADS)

Grombein, T.; Seitz, K.; Heck, B.

2013-12-01

In general, national height reference systems are related to individual vertical datums defined by specific tide gauges. The discrepancy of these vertical datums causes height system biases that range in an order of 1-2 m at a global scale. Continental height systems can be connected by spirit leveling and gravity measurements along the leveling lines as performed for the definition of the European Vertical Reference Frame. In order to unify intercontinental height systems, an indirect connection is needed. For this purpose, global geopotential models derived from recent satellite missions like GOCE provide an important contribution. However, to achieve a highly-precise solution, a combination with local terrestrial gravity data is indispensable. Such combinations result in the solution of a Geodetic Boundary Value Problem (GBVP). In contrast to previous studies, mostly related to the traditional (scalar) free GBVP, the present paper discusses the use of the fixed GBVP for height system unification, where gravity disturbances instead of gravity anomalies are applied as boundary values. The basic idea of our approach is a conversion of measured gravity anomalies to gravity disturbances, where unknown datum parameters occur that can be associated with height system biases. In this way, the fixed GBVP can be extended by datum parameters for each datum zone. By evaluating the GBVP at GNSS/leveling benchmarks, the unknown datum parameters can be estimated in a least squares adjustment. Beside the developed theory, we present numerical results of a case study based on the spherical fixed GBVP and boundary values simulated by the use of the global geopotential model EGM2008. In a further step, the impact of approximations like linearization as well as topographic and ellipsoidal effects is taken into account by suitable reduction and correction terms.

Importance of methodological standardization for the ektacytometric measures of red blood cell deformability in sickle cell anemia.

PubMed

Renoux, Céline; Parrow, Nermi; Faes, Camille; Joly, Philippe; Hardeman, Max; Tisdale, John; Levine, Mark; Garnier, Nathalie; Bertrand, Yves; Kebaili, Kamila; Cuzzubbo, Daniela; Cannas, Giovanna; Martin, Cyril; Connes, Philippe

2016-01-01

Red blood cell (RBC) deformability is severely decreased in patients with sickle cell anemia (SCA), which plays a role in the pathophysiology of the disease. However, investigation of RBC deformability from SCA patients demands careful methodological considerations. We assessed RBC deformability by ektacytometry (LORRCA MaxSis, Mechatronics, The Netherlands) in 6 healthy individuals and 49 SCA patients and tested the effects of different heights of the RBC diffraction patterns, obtained by altering the camera gain of the LORRCA, on the result of RBC deformability measurements, expressed as Elongation Index (EI). Results indicate that the pattern of RBCs from control subjects adopts an elliptical shape under shear stress, whereas the pattern of RBCs from individuals with SCA adopts a diamond shape arising from the superposition of elliptical and circular patterns. The latter represent rigid RBCs. While the EI measures did not change with the variations of the RBC diffraction pattern heights in the control subjects, we observed a decrease of EI when the RBC diffraction pattern height is increased in the SCA group. The differences in SCA EI values measured at 5 Pa between the different diffraction pattern heights correlated with the percent of hemoglobin S and the percent of sickled RBC observed by microscopy. Our study confirms that the camera gain or aperture of the ektacytometer should be used to standardize the size of the RBC diffraction pattern height when measuring RBC deformability in sickle cell patients and underscores the potential clinical utility of this technique.

Growth hormone (GH) dosing during catch-up growth guided by individual responsiveness decreases growth response variability in prepubertal children with GH deficiency or idiopathic short stature.

PubMed

Kriström, Berit; Aronson, A Stefan; Dahlgren, Jovanna; Gustafsson, Jan; Halldin, Maria; Ivarsson, Sten A; Nilsson, Nils-Osten; Svensson, Johan; Tuvemo, Torsten; Albertsson-Wikland, Kerstin

2009-02-01

Weight-based GH dosing results in a wide variation in growth response in children with GH deficiency (GHD) or idiopathic short stature (ISS). The hypothesis tested was whether individualized GH doses, based on variation in GH responsiveness estimated by a prediction model, reduced variability in growth response around a set height target compared with a standardized weight-based dose. A total of 153 short prepubertal children diagnosed with isolated GHD or ISS (n = 43) and at least 1 SD score (SDS) below midparental height SDS (MPH(SDS)) were included in this 2-yr multicenter study. The children were randomized to either a standard (43 microg/kg.d) or individualized (17-100 microg/kg.d) GH dose. We measured the deviation of height(SDS) from individual MPH(SDS) (diffMPH(SDS)). The primary endpoint was the difference in the range of diffMPH(SDS) between the two groups. The diffMPH(SDS) range was reduced by 32% in the individualized-dose group relative to the standard-dose group (P < 0.003), whereas the mean diffMPH(SDS) was equal: -0.42 +/- 0.46 and -0.48 +/- 0.67, respectively. Gain in height(SDS) 0-2 yr was equal for the GH-deficient and ISS groups: 1.31 +/- 0.47 and 1.36 +/- 0.47, respectively, when ISS was classified on the basis of maximum GH peak on the arginine-insulin tolerance test or 24-h profile. Individualized GH doses during catch-up growth significantly reduce the proportion of unexpectedly good and poor responders around a predefined individual growth target and result in equal growth responses in children with GHD and ISS.

Estimating Mixed Broadleaves Forest Stand Volume Using Dsm Extracted from Digital Aerial Images

NASA Astrophysics Data System (ADS)

Sohrabi, H.

2012-07-01

In mixed old growth broadleaves of Hyrcanian forests, it is difficult to estimate stand volume at plot level by remotely sensed data while LiDar data is absent. In this paper, a new approach has been proposed and tested for estimating stand forest volume. The approach is based on this idea that forest volume can be estimated by variation of trees height at plots. In the other word, the more the height variation in plot, the more the stand volume would be expected. For testing this idea, 120 circular 0.1 ha sample plots with systematic random design has been collected in Tonekaon forest located in Hyrcanian zone. Digital surface model (DSM) measure the height values of the first surface on the ground including terrain features, trees, building etc, which provides a topographic model of the earth's surface. The DSMs have been extracted automatically from aerial UltraCamD images so that ground pixel size for extracted DSM varied from 1 to 10 m size by 1m span. DSMs were checked manually for probable errors. Corresponded to ground samples, standard deviation and range of DSM pixels have been calculated. For modeling, non-linear regression method was used. The results showed that standard deviation of plot pixels with 5 m resolution was the most appropriate data for modeling. Relative bias and RMSE of estimation was 5.8 and 49.8 percent, respectively. Comparing to other approaches for estimating stand volume based on passive remote sensing data in mixed broadleaves forests, these results are more encouraging. One big problem in this method occurs when trees canopy cover is totally closed. In this situation, the standard deviation of height is low while stand volume is high. In future studies, applying forest stratification could be studied.

The 2017 Korean National Growth Charts for children and adolescents: development, improvement, and prospects

PubMed Central

Kim, Jae Hyun; Yun, Sungha; Hwang, Seung-sik; Shim, Jung Ok; Chae, Hyun Wook; Lee, Yeoun Joo; Lee, Ji Hyuk; Kim, Soon Chul; Lim, Dohee; Yang, Sei Won

2018-01-01

Growth charts are curves or tables that facilitate the visualization of anthropometric parameters, and are widely used as an important indicator when evaluating the growth status of children and adolescents. The latest version of the Korean National Growth Charts released in 2007 has raised concerns regarding the inclusion of data from both breastfed and formula-fed infants, higher body mass index (BMI) values in boys, and smaller 3rd percentile values in height-for-age charts. Thus, new growth charts have been developed to improve the previous version. The 2006 World Health Organization Child Growth Standards, regarded as the standard for breastfed infants and children, were introduced for children aged 0–35 months. For children and adolescents aged 3–18 years, these new growth charts include height-for-age, weight-for-age, BMI-for-age, weight-for-height, and head circumference-for-age charts, and were developed using data obtained in 1997 and 2005. Data sets and exclusion criteria were applied differently for the development of the different growth charts. BMI-for-age charts were adjusted to decrease the 95th percentile values of BMI. Criteria for obesity were simplified and defined as a BMI of ≥95th percentile for age and sex. The 3rd percentile values for height-for-age charts were also increased. Additional percentile lines (1st and 99th) and growth charts with standard deviation lines were introduced. 2017 Korean National Growth Charts are recommended for the evaluation of body size and growth of Korean children and adolescents for use in clinics and the public health sector in Korea. PMID:29853938

Gender bias in nineteenth-century England: Evidence from factory children.

PubMed

Horrell, Sara; Oxley, Deborah

2016-09-01

Gender bias against girls in nineteenth-century England has received much interest but establishing its existence has proved difficult. We utilise data on heights of 16,402 children working in northern textile factories in 1837 to examine whether gender bias was evident. Current interpretations argue against any difference. Here our comparisons with modern height standards reveal greater deprivation for girls than for boys. Discrimination is measured in girls' height-for-age score (HAZ) falling eight standard errors below boys' at ages 11, 11.5 and 12 years of age, capturing the very poor performance of factory girls. But this result cannot be taken at face value. We query whether modern standards require adjustment to account for the later timing of puberty in historical populations and develop an alternative. We also test the validity of the age data, considering whether parents were more prone to lie about the ages of their daughters, and question whether the supply of girls was fundamentally different from that of boys. We conclude that neither proposition is justified. Disadvantage to girls remains, although its absence amongst younger children precludes an indictment of culturally founded gender bias. The height data must remain mute on the source of this discrimination but we utilise additional information to examine some hypotheses: occupational sorting, differential susceptibility to disease, poorer nutrition for girls, disproportionate stunting from the effects of nutritional deprivation, and type and amount of work undertaken. Of these we suggest that girls had to do arduous physical labour in the home alongside their factory work. The only (unsubstantiated) alternative is that girls were more likely than boys to be put into factory work below the legal age limit. Both represent forms of gender bias. Copyright © 2016 Elsevier B.V. All rights reserved.