Odors identification differences in deficit and nondeficit schizophrenia.

PubMed

Pełka-Wysiecka, Justyna; Wroński, Michał; Bieńkowski, Przemysław; Murawiec, Sławomir; Samochowiec, Agnieszka; Samochowiec, Jerzy

2016-04-01

There is evidence that deficit schizophrenia (DS) is associated with neuroanatomical changes in structures including those involved in olfaction. Olfactory dysfunction, which includes impaired odor identification, is found in patients with schizophrenia and their family members. 82 patients with DS and 72 patients with NDS (nondeficit schizophrenia), somatically healthy and without acute psychotic symptoms undertook a smell identification test using the 16-item Sniffin' Sticks ID test. Demographic and psychometric data were collected. No differences in the course of the illness, perinatal history and demographic data were found between the DS and NDS groups. No differences in the number of correctly identified odor samples were found. Some differences in the qualitative identification of samples between DS and NDS were found in the groups of female (fewer correct identifications of cinnamon and pineapple smells in DS) and male patients (fewer correct identifications of the smell of rose and more correct identifications of the smell of orange than in NDS). No overall differences between DS and NDS regarding odors identification have been found. The results seem to indicate some specific deficits in the identification of markers of rose, pineapple, orange and cinnamon. Copyright © 2015 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

A Cross-Cultural Adaptation of the Sniffin' Sticks Olfactory Identification Test for US children.

PubMed

Cavazzana, Annachiara; Wesarg, Christiane; Schriever, Valentin A; Hummel, Thomas; Lundström, Johan N; Parma, Valentina

2017-02-01

Disorders associated with smell loss are common in adolescents. However, current odor identification tests focus on children from age 6 and older and no cross-cultural test has to date been validated and fully implemented. Here, we aimed to investigate how 3-to-11-year-old US children performed to an adapted and shortened (11 odors instead of 14) version of a European odor identification test-the Sniffin' Kids (Schriever VA, Mori E, Petters W, Boerner C, Smitka M, Hummel T. 2014. The "Sniffin'Kids" test: a 14-item odor identification test for children. Plos One. 9:e101086.). Results confirmed that cued odor identification performance increases with age and revealed little to no differences between girls and boys. Scores below 3 and below 6 may raise hyposmia concerns in US children aged 3-7 years and 8-10 years, respectively. Even though the completion rate of the task reached the 88%, suggesting that children below age 5 were able to finish the test, their performance was relatively poor. In comparing the overall identification performance of US children with that of German children, for whom the test was specifically developed, significant differences emerged, with higher scores obtained by the German sample. Analysis of errors indicated that a lack of semantic knowledge for the olfactory-presented objects may be at the root of poor identification skills in US children and therefore constitutes a problem in the development of an odor identification test for younger children valid across cultures. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

CPW-fed Circularly Polarized Slot Antenna with Small Gap and Stick-shaped Shorted Strip for UHF FRID Readers

NASA Astrophysics Data System (ADS)

Pan, Chien-Yuan; Su, Chum-Chieh; Yang, Wei-Lin

2018-04-01

A new circularly polarized (CP) slot antenna with a small gap and a stick-shaped shorted strip is presented. The proposed antenna has a sufficient bandwidth for ultrahigh frequency (UHF) radio-frequency identification (RFID) reader applications. The antenna structure consists of a rectangular slot with a small gap, a stick-shaped shorted strip and a 50 Ω coplanar waveguide (CPW) feedline with an asymmetrical ground plane. By using the stick -shaped shorted strip to disturb magnetic current distribution on the slot, the CP radiation can be generated. The measured results demonstrate that the proposed antenna can reach a 10 dB return loss impedance bandwidth of 14.1 % (894-1030 MHz) and a 3 dB axial ratio (AR) bandwidth of 6.4 % (910-970 MHz). The whole antenna size is 80 × 80 × 1.6 mm3.

An evaluation of olfactory function in adults with gastro-esophageal reflux disease.

PubMed

Günbey, Emre; Gören, İbrahim; Ünal, Recep; Yılmaz, Melikşah

2016-01-01

To the best of the authors' knowledge, this study is the first to evaluate the olfactory function of adult patients diagnosed with GERD. The results revealed that adults with GERD have diminished olfactory function. This study aimed to evaluate the olfactory abilities of subjects using the 'Sniffin' Sticks' olfactory test. A total of 35 men and women aged 18-60 years with a diagnosis of GERD and 45 healthy controls were included in the study. The Sniffin' Sticks olfactory test results of the two groups were compared, and the relationship between the study findings and the olfactory parameters was evaluated. The odor threshold (10.1; 9.5, p = 0.016), odor identification (9.6; 8.1, p < 0.001), and odor discrimination (10.7; 8.9, p < 0.001) of the GERD group were significantly lower than those of the control group. A statistically significant positive correlation was detected between the accompanying chronic pharyngitis, chronic sinusitis, and odor parameters. A significant correlation was not detected between the laryngeal findings and the olfactory parameters.

Dissuasive cigarette sticks: the next step in standardised ('plain') packaging?

PubMed

Hoek, Janet; Gendall, Philip; Eckert, Christine; Louviere, Jordan

2016-11-01

Standardised (or 'plain') packaging has reduced the appeal of smoking by removing imagery that smokers use to affiliate themselves with the brand they smoke. We examined whether changing the appearance of cigarette sticks could further denormalise smoking and enhance the negative impact of standardised packaging. We conducted an online study of 313 New Zealand smokers who comprised a Best-Worst Choice experiment and a rating task. The Best-Worst experiment used a 2×3×3×6 orthogonal design to test the following attributes: on-pack warning message, branding level, warning size and stick appearance. We identified three segments whose members' choice patterns were strongly influenced by the stick design, warning theme and size, and warning theme, respectively. Each of the dissuasive sticks tested was less preferred and rated as less appealing than the most common stick in use; a 'minutes of life lost' stick was the most aversive of the stimuli tested. Dissuasive sticks could enhance the effect of standardised packaging, particularly among older smokers who are often more heavily addicted and resistant to change. Countries introducing standardised packaging legislation should take the opportunity to denormalise the appearance of cigarette sticks, in addition to removing external tobacco branding from packs and increasing the warning size. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Heightened Olfactory Sensitivity in Young Females with Recent-Onset Anorexia Nervosa and Recovered Individuals

PubMed Central

Bentz, Mette; Guldberg, Johanne; Vangkilde, Signe; Pedersen, Tine; Plessen, Kerstin Jessica; Jepsen, Jens Richardt Moellegaard

2017-01-01

Introduction Olfaction may be related to food restriction and weight loss. However, reports regarding olfactory function in individuals with anorexia nervosa (AN) have been inconclusive. Objective Characterize olfactory sensitivity and identification in female adolescents and young adults with first-episode AN and young females recovered from AN. Methods We used the Sniffin’ Sticks Odor Threshold Test and Odor Identification Test to assess 43 participants with first-episode AN, 27 recovered participants, and 39 control participants. Participants completed the Importance of Olfaction questionnaire, the Beck Youth Inventory and the Eating Disorder Inventory. We also conducted a psychiatric diagnostic interview and the Autism Diagnostic Observation Schedule with participants. Results Both clinical groups showed heightened olfactory sensitivity. After excluding participants with depression, participants with first-episode AN identified more odors than recovered participants. Conclusion Heightened olfactory sensitivity in AN may be independent of clinical status, whereas only individuals with current AN and without depression show more accurate odor identification. PMID:28060877

Osmophobia and olfactory functions in patients with migraine.

PubMed

Kayabaşoglu, Gürkan; Altundag, Aytug; Kotan, Dilcan; Dizdar, Denizhan; Kaymaz, Recep

2017-02-01

Olfactory dysfunction and migraine has been associated for a long time. In this study, we planned to compare olfactory functions in patients with migraine and osmophobia with patients having migraine but no osmophobia, in addition with a normal control group using "Sniffin' Sticks" test. The main distinction of this study is that all qualitative and quantitative properties of olfactory functions; threshold, discrimination and identification, are evaluated separately and jointly. Thirty healthy person aged between 16 and 56 (18 women, 12 men) and 60 migraine patients aged between 15 and 54 (39 women, 21 man) were included in the study. All patients have been inquired about osmophobia and have been assessed with Hedonic tone assessment. Osmophobia has been tested for perfume, cigarette smoke, leather, stale food, soy sauce, fish, spices and coffee smells. Olfactory functions has been assessed with "Sniffin' Sticks" smell test. Thresholds, discrimination and identification have been determined for each patient. In migraine patients with osmophobia, threshold was 7.75 ± 2.3, in migraine patients without osmophobia threshold was 8.25 ± 1.5 and threshold was 10.75 ± 1.3 for the control group. Discrimination score was 6 ± 1.2 in migraine patients with osmophobia, 9 ± 0.8 in patients without osmophobia and was 12 ± 1.4 in the control group. In migraine patient with or without osmophobia Threshold/Discrimination/Identification (TDI) scores were lower than the control group. The most important parameter in our study is that discrimination scores were especially lower in patients with osmophobia. We believe that this decrease in discrimination in migraine patients with osmophobia; who claim that they smell everything and they are sensitive to all smells, is significant. Further studies about smell discrimination will help better understand some conditions; especially anosmia and hyposmia after upper respiratory tract infections and parosmia.

Enterobacter aerogenes Needle Stick Leads to Improved Biological Management System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johanson, Richard E.

2004-08-01

A laboratory worker who received a needle stick from a contaminated needle while working with a culture containing Enterobactor aerogenes developed a laboratory acquired infection. Although this organism has been shown to cause community and nosocomial infections, there have been no documented cases of a laboratory acquired infections. Lessons learned from the event led to corrective actions which included modification of lab procedures, development of a biological inventory tracking and risk identification system and the establishment of an effective biological safety program.

Olfactory Performance in a Large Sample of Early-Blind and Late-Blind Individuals.

PubMed

Sorokowska, Agnieszka

2016-10-01

Previous examinations of olfactory sensitivity in blind people have produced contradictory findings. Thus, whether visual impairment is associated with increased olfactory abilities is unclear. In the present investigation, I aimed to resolve the existing questions via a relatively large-scale study comprising early-blind (N = 43), and late-blind (N = 41) and sighted (N = 84) individuals matched in terms of gender and age. To compare the results with those of previous studies, I combined data from a free odor identification test, extensive psychophysical testing (Sniffin' Sticks test), and self-assessed olfactory performance. The analyses revealed no significant effects of sight on olfactory threshold, odor discrimination, cued identification, or free identification scores; neither was the performance of the early-blind and late-blind participants significantly different. Additionally, the self-assessed olfactory abilities of the blind people were no different than those of the sighted people. These results suggest that sensory compensation in visually impaired is not pronounced with regards to olfactory abilities as measured by standardized smell tests. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Tests of a 1/7-Scale Semispan Model of the XB-35 Airplane in the Langley 19-Foot Pressure Tunnel

NASA Technical Reports Server (NTRS)

Teplitz, Jerome; Kayten, Gerald G.; Cancro, Patrick A.

1946-01-01

A 1/7 scale semispan model of the XB-35 airplane was tested in the Langley 10 foot pressure tunnel, primarily for the purpose of investigating the effectiveness of a leading-edge slot for alleviation of stick-fixed longitudinal instability at high angles of attack caused by early tip stalling and a device for relief of stick-free instability caused by elevon up-floating tendencies at high angles of attack. Results indicated that the slot was not adequate to provide the desired improvement in stick-fixed stability. The tab-flipper device provided improvement in stick-free stability abd two of the linkage combinations tested gave satisfactory variations of control force with airspeed for all conditions except that in which the wing-tip "pitch-control" flap was fully deflected. However, the improvement in control force characteristics was accompanied by a detrimental effect on stick-fixed stability because of the pitching moments produced by the elevon tab deflection.

Acute effects of The Stick on strength, power, and flexibility.

PubMed

Mikesky, Alan E; Bahamonde, Rafael E; Stanton, Katie; Alvey, Thurman; Fitton, Tom

2002-08-01

The Stick is a muscle massage device used by athletes, particularly track athletes, to improve performance. The purpose of this project was to assess the acute effects of The Stick on muscle strength, power, and flexibility. Thirty collegiate athletes consented to participate in a 4-week, double-blind study, which consisted of 4 testing sessions (1 familiarization and 3 data collection) scheduled 1 week apart. During each testing session subjects performed 4 measures in the following sequence: hamstring flexibility, vertical jump, flying-start 20-yard dash, and isokinetic knee extension at 90 degrees x s(-1). Two minutes of randomly assigned intervention treatment (visualization [control], mock insensible electrical stimulation [placebo], or massage using The Stick [experimental]) was performed immediately prior to each performance measure. Statistical analyses involved single-factor repeated measures analysis of variance (ANOVA) with Fisher's Least Significant Difference post-hoc test. None of the variables measured showed an acute improvement (p < or = 0.05) immediately following treatment with The Stick.

Comparison of hiking stick use on lateral stability while balancing with and without a load.

PubMed

Jacobson, B H; Caldwell, B; Kulling, F A

1997-08-01

To compare hiking stick use on lateral stability while balancing with or without a load (15-kg internal frame backpack) under conditions of no stick, 1 stick, and 2 sticks for six trials 15 volunteers ages 19 to 23 years (M = 21.7 yr.) were tested six separate times on a stability platform. During randomly ordered, 1-min. trials, the length of time (sec.) the subject maintained balance (+/-10 degrees of horizontal) and the number of deviations beyond 10 degrees were recorded simultaneously. Backpack and hiking sticks were individually adjusted for each subject. A 2 x 3 repeated factor analysis of variance indicated that subjects balanced significantly longer both with and without a load while using 2 hiking sticks than 1 or 0 sticks. Significantly fewer deviations beyond 10 degrees were found when subjects were without a load and using 1 or 2 sticks versus when they used none, and no significant difference in the number of deviations were found between 1 and 2 hiking sticks. When subjects were equipped with a load, significantly improved balance was found only between the 2 sticks and no sticks. Balance was significantly enhanced by using hiking sticks, and two sticks were more effective than one while carrying a load. An increase in maintenance of static balance may reduce the possibility of falling and injury while standing on loose alpine terrain.

A fundamental approach to the sticking of insect residues to aircraft wings

NASA Technical Reports Server (NTRS)

Eiss, N. S., Jr.; Wightman, J. P.

1983-01-01

The sticking of insect residues to aircraft wings is investigated. The major topics of this review are: Experimentally tested methods, testing techniques, the effect of surface roughness height on aerodynamic drag, materials tested and, the adhesive properties of insect body fluids are reviewed.

A critique of the use of indicator-species scores for identifying thresholds in species responses

USGS Publications Warehouse

Cuffney, Thomas F.; Qian, Song S.

2013-01-01

Identification of ecological thresholds is important both for theoretical and applied ecology. Recently, Baker and King (2010, King and Baker 2010) proposed a method, threshold indicator analysis (TITAN), to calculate species and community thresholds based on indicator species scores adapted from Dufrêne and Legendre (1997). We tested the ability of TITAN to detect thresholds using models with (broken-stick, disjointed broken-stick, dose-response, step-function, Gaussian) and without (linear) definitive thresholds. TITAN accurately and consistently detected thresholds in step-function models, but not in models characterized by abrupt changes in response slopes or response direction. Threshold detection in TITAN was very sensitive to the distribution of 0 values, which caused TITAN to identify thresholds associated with relatively small differences in the distribution of 0 values while ignoring thresholds associated with large changes in abundance. Threshold identification and tests of statistical significance were based on the same data permutations resulting in inflated estimates of statistical significance. Application of bootstrapping to the split-point problem that underlies TITAN led to underestimates of the confidence intervals of thresholds. Bias in the derivation of the z-scores used to identify TITAN thresholds and skewedness in the distribution of data along the gradient produced TITAN thresholds that were much more similar than the actual thresholds. This tendency may account for the synchronicity of thresholds reported in TITAN analyses. The thresholds identified by TITAN represented disparate characteristics of species responses that, when coupled with the inability of TITAN to identify thresholds accurately and consistently, does not support the aggregation of individual species thresholds into a community threshold.

23. HISTORIC VIEW OF ONE STICK REPULSOR OF RAKETENFLUGPLATZ GROUP. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. HISTORIC VIEW OF ONE STICK REPULSOR OF RAKETENFLUGPLATZ GROUP. POSSIBLY 1931, THE STAND IS FOR LAUNCHING NOT FOR STATIC TESTS. - Marshall Space Flight Center, Redstone Rocket (Missile) Test Stand, Dodd Road, Huntsville, Madison County, AL

Identification, rearing, and distribution of stick insects of Madeira Island: An example of raising biodiversity awareness

PubMed Central

Aguiar, António M. F.; Pombo, Dora Aguin; Gonçalves, Ysabel M.

2014-01-01

Abstract Two species of stick insects are currently known to be present in the Macaronesian archipelagos: Clonopsis gallica (Charpentier) (Phasmatodea: Bacillidae) on the Canary Islands and in the Azores and Carausius morosus (Sinéty) (Phasmatidae) in the Azores. Here, we provide the first reliable records of the presence and distribution of C. gallica and C. morosus on Madeira Island. Egg and adult stages are briefly described along with some notes on the life history of these species in captivity. Data on islandwide distribution are based on specimens donated by the public in response to an article published in a daily newspaper. This method of data collection raised great popular interest in stick insects. The role of newspapers as a means of communicating awareness in biodiversity issues is discussed. PMID:25373196

Development of flow-through and dip-stick immunoassays for screening of sulfonamide residues.

PubMed

Zhang, Hongyan; Zhang, Yan; Wang, Shuo

2008-08-20

Two formats of membrane-based competitive enzyme immunoassays (flow-through and dip-stick) have been developed for the screening of sulfonamide residues in pig muscle and milk. Membrane was coated with anti-sulfonamide antibody and a sulfonamide hapten D2-horseradish peroxidase (HRP) conjugant was used as the labeled antigen for competitive assay of sulfonamides. Visual detection limits of the flow-through or dip-stick assay were 1-5 microg L(-1) or 1-10 microg L(-1) in buffer for seven sulfonamides, respectively. Assay validation was performed using samples spiked with single sulfonamide, spiked samples were tested using the developed strip assays and results were compared with those obtained by a validated high-performance liquid chromatograph (HPLC) method. Results showed that the two strip assays were correlated well with HPLC, respectively. With assay times of 5 min (flow-through) and 15 min (dip-stick), these rapid tests could offer simple, rapid and cost-effective on-site screening tools to detect sulfonamides in pig muscle (flow-through or dip-stick) or milk (only dip-stick).

Forest research notes, Pacific Northwest Forest Experiment Station, No. 30, June 21, 1940.

Treesearch

Donald N. Matthews; William G. Morris

1940-01-01

(Matthews)The test was made to determine the effect of three possible variations in the indicator sticks: 1. Variations in shape. Will square, round, or flat sticks of the same cross section, length, and exposure have the same moisture content? 2. Variation in exposure. Determine the effect of exposing the sticks in the open versus...

Diagnostic Value of the Impairment of Olfaction in Parkinson's Disease

PubMed Central

Casjens, Swaantje; Eckert, Angelika; Woitalla, Dirk; Ellrichmann, Gisa; Turewicz, Michael; Stephan, Christian; Eisenacher, Martin; May, Caroline; Meyer, Helmut E.; Brüning, Thomas; Pesch, Beate

2013-01-01

Background Olfactory impairment is increasingly recognized as an early symptom in the development of Parkinson's disease. Testing olfactory function is a non-invasive method but can be time-consuming which restricts its application in clinical settings and epidemiological studies. Here, we investigate odor identification as a supportive diagnostic tool for Parkinson's disease and estimate the performance of odor subsets to allow a more rapid testing of olfactory impairment. Methodology/Principal Findings Odor identification was assessed with 16 Sniffin' sticks in 148 Parkinson patients and 148 healthy controls. Risks of olfactory impairment were estimated with proportional odds models. Random forests were applied to classify Parkinson and non-Parkinson patients. Parkinson patients were rarely normosmic (identification of more than 12 odors; 16.8%) and identified on average seven odors whereas the reference group identified 12 odors and showed a higher prevalence of normosmy (31.1%). Parkinson patients with rigidity dominance had a twofold greater prevalence of olfactory impairment. Disease severity was associated with impairment of odor identification (per score point of the Hoehn and Yahr rating OR 1.87, 95% CI 1.26–2.77). Age-related impairment of olfaction showed a steeper gradient in Parkinson patients. Coffee, peppermint, and anise showed the largest difference in odor identification between Parkinson patients and controls. Random forests estimated a misclassification rate of 22.4% when comparing Parkinson patients with healthy controls using all 16 odors. A similar rate (23.8%) was observed when only the three aforementioned odors were applied. Conclusions/Significance Our findings indicate that testing odor identification can be a supportive diagnostic tool for Parkinson's disease. The application of only three odors performed well in discriminating Parkinson patients from controls, which can facilitate a wider application of this method as a point-of-care test. PMID:23696904

Evaluation of olfactory function in adults with primary hypothyroidism.

PubMed

Günbey, Emre; Karlı, Rıfat; Gökosmanoğlu, Feyzi; Düzgün, Berkan; Ayhan, Emre; Atmaca, Hulusi; Ünal, Recep

2015-10-01

Sufficient clinical data are not available on the effect of hypothyroidism on olfactory function in adults. In this study, we aimed to evaluate the olfactory function of adult patients diagnosed with primary hypothyroidism. Forty-five patients aged between 18 and 60 years who were diagnosed with clinical primary hypothyroidism and 45 healthy controls who had normal thyroid function tests were included in the study. Sniffin' Sticks olfactory test results of the 2 groups were compared. The relationships between thyroid function tests and olfactory parameters were evaluated. Odor threshold, identification, and discrimination scores of the hypothyroid group were significantly lower than those of the control group (p < 0.001). A significant positive correlation was detected between free triiodothyronine (FT3) levels and odor threshold, identification, and discrimination scores (p < 0.001). There was no significant relationship between thyroid-stimulating hormone (TSH) or free thyroxine (FT4) levels and olfactory parameters. Our study revealed diminished olfactory function in adults with hypothyroidism. FT3 levels were found to have a more significant relationship with olfactory parameters than TSH or FT4 levels. © 2015 ARS-AAOA, LLC.

Innate Pattern Recognition and Categorization in a Jumping Spider

PubMed Central

Dolev, Yinnon; Nelson, Ximena J.

2014-01-01

The East African jumping spider Evarcha culicivora feeds indirectly on vertebrate blood by preferentially preying upon blood-fed Anopheles mosquitoes, the vectors of human malaria1, using the distinct resting posture and engorged abdomen characteristic of these specific prey as key elements for their recognition. To understand perceptual categorization of objects by these spiders, we investigated their predatory behavior toward different digital stimuli - abstract ‘stick figure’ representations of Anopheles constructed solely by known key identification elements, disarranged versions of these, as well as non-prey items and detailed images of alternative prey. We hypothesized that the abstract images representing Anopheles would be perceived as potential prey, and would be preferred to those of non-preferred prey. Spiders perceived the abstract stick figures of Anopheles specifically as their preferred prey, attacking them significantly more often than non-preferred prey, even when the comprising elements of the Anopheles stick figures were disarranged and disconnected from each other. However, if the relative angles between the elements of the disconnected stick figures of Anopheles were altered, the otherwise identical set of elements was no longer perceived as prey. These data show that E. culicivora is capable of making discriminations based on abstract concepts, such as the hypothetical angle formed by discontinuous elements. It is this inter-element angle rather than resting posture that is important for correct identification of Anopheles. Our results provide a glimpse of the underlying processes of object recognition in animals with minute brains, and suggest that these spiders use a local processing approach for object recognition, rather than a holistic or global approach. This study provides an excellent basis for a comparative analysis on feature extraction and detection by animals as diverse as bees and mammals. PMID:24893306

Comparison of Single-Stick and Double-Stick Techniques for Percutaneous Nephrostomy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Funaki, Brian, E-mail: bfunaki@midway.uchicago.edu; Vatakencherry, Geogi

2004-01-15

We compared single- and double-stick techniques of percutaneous nephrostomy insertion by retrospectively reviewing 140 percutaneous nephrostomy procedures in 101 patients. All procedures were performed by residents or fellows with direct attending supervision. Either the single-stick or double-stick technique was used based solely on personal attending preference. There were no significant differences in groups in terms of age, sex, or degree of hydronephrosis. In the single-stick technique, the kidney was punctured with sonographic guidance and the tract was serially dilated to accept an 8.5 Fr. nephrostomy catheter. In the double-stick technique, the kidney was punctured with sonographic guidance and a mixturemore » of air and contrast were injected into the collecting system. The affected side was then elevated and a posterior calyx was punctured using fluoroscopic guidance. Both groups were compared in terms of complications and early tube dysfunction using the chi-squared test. All procedures were successful without immediate complications. Bleeding requiring transfusion occurred in 4.7% (4/86) procedures in the single stick group and 3.7% (2/54) in the double stick group (p-value not significant). None of these patients required further interventions for bleeding. Tube dysfunction leading to premature tube exchange occurred in 3.5% (3/86) of catheters in the single stick group and 3.7% (2/54) of catheters in the double- stick group (p-value not significant). We found no significant difference between the single and double- stick methods of percutaneous nephrostomy in terms of success rates, complications, or tube function. We believe that the single-stick method should be adopted as the insertion technique of choice.« less

Miniature stick-packaging--an industrial technology for pre-storage and release of reagents in lab-on-a-chip systems.

PubMed

van Oordt, Thomas; Barb, Yannick; Smetana, Jan; Zengerle, Roland; von Stetten, Felix

2013-08-07

Stick-packaging of goods in tubular-shaped composite-foil pouches has become a popular technology for food and drug packaging. We miniaturized stick-packaging for use in lab-on-a-chip (LOAC) systems to pre-store and on-demand release the liquid and dry reagents in a volume range of 80-500 μl. An integrated frangible seal enables the pressure-controlled release of reagents and simplifies the layout of LOAC systems, thereby making the package a functional microfluidic release unit. The frangible seal is adjusted to defined burst pressures ranging from 20 to 140 kPa. The applied ultrasonic welding process allows the packaging of temperature sensitive reagents. Stick-packs have been successfully tested applying recovery tests (where 99% (STDV = 1%) of 250 μl pre-stored liquid is released), long-term storage tests (where there is loss of only <0.5% for simulated 2 years) and air transport simulation tests. The developed technology enables the storage of a combination of liquid and dry reagents. It is a scalable technology suitable for rapid prototyping and low-cost mass production.

Quality changes of fresh-cut kohlrabi sticks under modified atmosphere packaging.

PubMed

Escalona, V H; Aguayo, E; Artés, F

2007-06-01

The aim of this study was to determine the effect of different gas compositions on quality attributes and shelf life of kohlrabi sticks stored in modified atmosphere up to 14 d at 0 degrees C. Two commercial films were tested: oriented polypropylene (OPP) and amide-polyethylene (amide-PE). As a control, a microperforated OPP film was used. In order to study the changes in metabolic activity by minimal processing, the respiration rate and ethylene production at 0 degrees C were monitored for both intact stems and sticks. Changes in color, chemical parameters, sugars and organic acid contents, and sensorial quality of kohlrabi sticks were evaluated. An initial ethylene production of sticks was 13-fold higher than that of intact stems; meanwhile CO(2) production was 2-fold higher. However after 4 d of storage, a similar respiration rate for stems and sticks was found. Also the ethylene production of sticks and stems was steady around 15 to 20 nL/kg(/)h after 10 d. Kohlrabi sticks showed a little change in chemical parameters and very low weight losses during cold storage. Sticks under an equilibrium atmosphere of 7 kPa O(2) and 9 kPa CO(2) at 0 degrees C reached by amide-PE kept an acceptable sensorial quality for 14 d.

Study of Odours and taste for Space Food

NASA Astrophysics Data System (ADS)

Katayama, Naomi; Space Agriculture Task Force; Nakata, Seiichi; Teranishi, Masaaki; Sone, Michihiko; Nakashima, Tsutomu; Hamajima, Nobuyuki; Ito, Yoshihiro

2012-07-01

The sense of taste and smell come under some kind of influences in the space environment. In the space, the astronaut was changed their food habits from light taste and smell food to like strong taste and smells food. When an astronaut live in the space comes to have weak bone like osteoporosis. It may become the physiologic condition like the old man on the earth. Therefore this study performed fact-finding of the smell and the taste in the old man on the earth as test bed of astronaut in space. Based on this finding, it was intended to predict the taste and the olfactory change of the astronaut in the space. The study included 179 males and 251 females aged 30-90 years in Yakumo Town, Hokkaido, Japan. Odours were tested using a ``standard odours by odour stick identification''method of organoleptic testing. Taste were tested using a ``standard taste by taste disc identification'' method of chemical testing. Correct answers for identification odours consisted of average 6.0±3.0 in male subjects and average 6.9±2.8 in female subjects. Correct answers for identification of sweet taste consisted of 81% males and 87% females, salty taste consisted of 86% males and 91%, sour taste consisted of 75% males and 78% females, bitter taste consisted of 76% males and 88% females. It became clear that overall approximately 20% were in some kind of abnormality in sense of smell and taste. I want to perform the investigation that continued more in future.

Cryptic diversity in Australian stick insects (Insecta; Phasmida) uncovered by the DNA barcoding approach.

PubMed

Velonà, A; Brock, P D; Hasenpusch, J; Mantovani, B

2015-05-18

The barcoding approach was applied to analyze 16 Australian morphospecies of the order Phasmida, with the aim to test if it could be suitable as a tool for phasmid species identification and if its discrimination power would allow uncovering of cryptic diversity. Both goals were reached. Eighty-two specimens representing twelve morphospecies (Sipyloidea sp. A, Candovia annulata, Candovia sp. A, Candovia sp. B, Candovia sp. C, Denhama austrocarinata, Xeroderus kirbii, Parapodacanthus hasenpuschorum, Tropidoderus childrenii, Cigarrophasma tessellatum, Acrophylla wuelfingi, Eurycantha calcarata) were correctly recovered as clades through the molecular approach, their sequences forming monophyletic and well-supported clusters. In four instances, Neighbor-Joining tree and barcoding gap analyses supported either a specific (Austrocarausius mercurius, Anchiale briareus) or a subspecific (Anchiale austrotessulata, Extatosoma tiaratum) level of divergence within the analyzed morphospecies. The lack of an appropriate database of homologous coxI sequences prevented more detailed identification of undescribed taxa.

Coupled oscillators in identification of nonlinear damping of a real parametric pendulum

NASA Astrophysics Data System (ADS)

Olejnik, Paweł; Awrejcewicz, Jan

2018-01-01

A damped parametric pendulum with friction is identified twice by means of its precise and imprecise mathematical model. A laboratory test stand designed for experimental investigations of nonlinear effects determined by a viscous resistance and the stick-slip phenomenon serves as the model mechanical system. An influence of accurateness of mathematical modeling on the time variability of the nonlinear damping coefficient of the oscillator is proved. A free decay response of a precisely and imprecisely modeled physical pendulum is dependent on two different time-varying coefficients of damping. The coefficients of the analyzed parametric oscillator are identified with the use of a new semi-empirical method based on a coupled oscillators approach, utilizing the fractional order derivative of the discrete measurement series treated as an input to the numerical model. Results of application of the proposed method of identification of the nonlinear coefficients of the damped parametric oscillator have been illustrated and extensively discussed.

Finding the Fertile Phase: Low-Cost Luteinizing Hormone Sticks Versus Electronic Fertility Monitor.

PubMed

Barron, Mary Lee; Vanderkolk, Kaitlin; Raviele, Kathleen

To investigate if generic Wondfo ovulation sticks (WLH) are sufficiently sensitive to the luteinizing hormone (LH) surge in urine when used with the Marquette Fertility Algorithm. The electronic hormonal fertility monitor (EHFM) is highly accurate in detecting the LH surge but cost of the monitor and the accompanying test sticks has increased over the last several years. The EHFM is sensitive to detect the LH surge at 20 milli-international units per milliliter (mIU/mL); the WLH sticks are slightly less sensitive at 25 mIU/mL. A convenience sample of women using the Marquette Method of Natural Family Planning with the EHFM to avoid pregnancy were recruited (N = 54). Each participant used the EHFM every morning after cycle day 6 and tested morning and evening urine with the WLH stick until the day following detection of the LH surge on the EHFM. Forty-two women provided 219 cycles. Frequency of LH surge detection was 182/219 (83.1%) for EHFM and 203/219 (92.7%) for WLH sticks. Agreement between the EHFM and the WLH on the day of the LH surge was 97.7%. High fertility readings providing a warning of peak fertility at least 5 days before peak was 67% for the WLH; the EHFM was 47.7%. Paired sample correlations for high fertility was .174 (p = .014) and paired sample differences t was -4.729 (p = .000). The WLH stick is sufficiently sensitive to use in place of the EFHM for determining peak fertility and with the Marquette Fertility algorithm. Even with minimal use, WLH sticks cost about half the price of the monitor strips and provide more flexibility of use. Cost differences increase with the number of sticks used per cycle. Further research with a larger sample is needed to verify results.

Hockey-stick steam generator for LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hallinan, G.J.; Svedlund, P.E.

1981-01-01

This paper presents the criteria and evaluation leading to the selection of the Hockey Stick Steam Generator Concept and subsequent development of that concept for LMFBR application. The selection process and development of the Modular Steam Generator (MSG) is discussed, including the extensive test programs that culminated in the manufacture and test of a 35 MW(t) Steam Generator. The design of the CRBRP Steam Generator is described, emphasizing the current status and a review of the critical structural areas. CRBRP steam generator development tests are evaluated, with a discussion of test objectives and rating of the usefulness of test resultsmore » to the CRBRP prototype design. Manufacturing experience and status of the CRBRP prototype and plant units is covered. The scaleup of the Hockey Stick concept to large commercial plant application is presented, with an evaluation of scaleup limitations, transient effects, and system design implications.« less

21 CFR 880.6025 - Absorbent tipped applicator.

Code of Federal Regulations, 2010 CFR

2010-04-01

... stick. The device is used to apply medications to, or to take specimens from, a patient. (b...) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Miscellaneous Devices § 880.6025 Absorbent tipped applicator. (a) Identification. An absorbent tipped applicator is a...

Application of denaturing high-performance liquid chromatography (DHPLC) for the identification of fish: a new way to determine the composition of processed food containing multiple species.

PubMed

Le Fresne, Sophie; Popova, Milena; Le Vacon, Françoise; Carton, Thomas

2011-12-14

The identification of fish species in transformed food products is difficult because the existing methods are not adapted to heat-processed products containing more than one species. Using a common to all vertebrates region of the cytochrome b gene, we have developed a denaturing high-performance liquid chromatography (DHPLC) fingerprinting method, which allowed us to identify most of the species in commercial crab sticks. Whole fish and fillets were used for the creation of a library of referent DHPLC profiles. Crab sticks generated complex DHPLC profiles in which the number of contained fish species can be estimated by the number of major fluorescence peaks. The identity of some of the species was predicted by comparison of the peaks with the referent profiles, and others were identified after collection of the peak fractions, reamplification, and sequencing. DHPLC appears to be a quick and efficient method to analyze the species composition of complex heat-processed fish products.

Identification, rearing, and distribution of stick insects of Madeira Island: an example of raising biodiversity awareness.

PubMed

Aguiar, António M F; Pombo, Dora Aguin; Gonçalves, Ysabel M

2014-04-10

Two species of stick insects are currently known to be present in the Macaronesian archipelagos: Clonopsis gallica (Charpentier) (Phasmatodea: Bacillidae) on the Canary Islands and in the Azores and Carausius morosus (Sinéty) (Phasmatidae) in the Azores. Here, we provide the first reliable records of the presence and distribution of C. gallica and C. morosus on Madeira Island. Egg and adult stages are briefly described along with some notes on the life history of these species in captivity. Data on islandwide distribution are based on specimens donated by the public in response to an article published in a daily newspaper. This method of data collection raised great popular interest in stick insects. The role of newspapers as a means of communicating awareness in biodiversity issues is discussed. This is an open access paper. We use the Creative Commons Attribution 3.0 license that permits unrestricted use, provided that the paper is properly attributed.

Retention strength of impression materials to a tray material using different adhesive methods: an in vitro study.

PubMed

Marafie, Yousef; Looney, Stephen; Nelson, Steven; Chan, Daniel; Browning, William; Rueggeberg, Frederick

2008-12-01

A new self-stick adhesive system has been purported to eliminate the need to use chemical adhesives with plastic impression trays; however, no testing has confirmed the claim. The purpose of this study was to compare the in vitro retentive strength of impression materials to plastic substrates having conventional adhesive (CA) or the self-stick adhesive system, with and without mechanical retention. Three types of impression materials (irreversible hydrocolloid (IH), vinyl polysiloxane (VPS), and polyether (PE)) were applied to polystyrene disc-shaped surfaces (33.68 cm(2)) that were held on the arms of a universal testing machine. The appropriate CA or the self-stick adhesive system (Self-Stick Dots) (SSD) was applied to the plates, which had either no mechanical retention, or equally spaced mechanical perforations (n=4). An in vivo pilot test determined the appropriate rate of plate separation. Plates with impression material were lowered to provide 4 mm of space, the material set, and plates were separated using the appropriate speed. Force at first separation was divided by plate area (peak stress). Five replications per test condition were made, and results were analyzed using ANOVA and Bonferroni-adjusted t tests (alpha=.05). Within each impression material/test combination, stress using SSD was significantly lower than CA (P<.05). Mechanical retention did not always provide significantly greater strength. The combination of mechanical retention and CA yielded the highest strength within each material type, except for PE, for which nonmechanical and CA strength did not differ from that of mechanical and CA. Use of the self-stick adhesive system provided significantly lower retentive strength to plastic tray material than chemical adhesives for irreversible hydrocolloid, vinyl polysiloxane, and polyether.

The effects of grip width on sticking region in bench press.

PubMed

Gomo, Olav; Van Den Tillaar, Roland

2016-01-01

The aim of this study was to examine the occurrence of the sticking region by examining how three different grip widths affect the sticking region in powerlifters' bench press performance. It was hypothesised that the sticking region would occur at the same joint angle of the elbow and shoulder independent of grip width, indicating a poor mechanical region for vertical force production at these joint angles. Twelve male experienced powerlifters (age 27.7 ± 8.8 years, mass 91.9 ± 15.4 kg) were tested in one repetition maximum (1-RM) bench press with a narrow, medium and wide grip. Joint kinematics, timing, bar position and velocity were measured with a 3D motion capture system. All participants showed a clear sticking region with all three grip widths, but this sticking region was not found to occur at the same joint angles in all three grip widths, thereby rejecting the hypothesis that the sticking region would occur at the same joint angle of the elbow and shoulder independent of grip width. It is suggested that, due to the differences in moment arm of the barbell about the elbow joint in the sticking region, there still might be a poor mechanical region for total force production that is joint angle-specific.

What do bonobos (Pan paniscus) understand about physical contact?

PubMed

Helme, Anne E; Call, Josep; Clayton, Nicola S; Emery, Nathan J

2006-08-01

The present study aimed to test what bonobos (Pan paniscus) understand about contact. The task consisted of a clear horizontal tube containing a piece of food and a stick with a disk attached. The bonobos chose which side to push or pull the stick for the disk to contact the food and make it accessible. There were 9 variations in tube design, which differed in the positions of the stick, disk, and food. All 5 bonobos passed at least 1 configuration. A recent study (A. E. Helme, N. S. Clayton, & N. J. Emery, 2006) found that rooks could learn only tube configurations that provided an asymmetrical stick cue, whereas bonobos did not demonstrate an understanding of contact but showed more individual variation, attending to the positions of the food, disk, and stick. ((c) 2006 APA, all rights reserved).

Association between olfactory identification and parkinsonism in patients with non-affective psychosis.

PubMed

Meijer, Julia H; van Harten, Peter; Meijer, Carin J; Koeter, Maarten W; Bruggeman, Richard; Cahn, Wiepke; Kahn, René S; de Haan, L

2016-10-01

Olfactory identification deficits (OIDs) are seen in schizophrenia patients and individuals at increased risk for psychosis but its pathophysiology remains unclear. Although dopaminergic imbalance is known to lie at the core of schizophrenia symptomatology, its role in the development of OIDs has not been elucidated yet. This study investigated the association between OIDs and symptoms of parkinsonism as a derivative of dopaminergic functioning. In 320 patients diagnosed with non-affective psychosis, olfactory identification performance was assessed by means of the Sniffin' Sticks task. Level of parkinsonian symptoms was assessed by means of the Unified Parkinson's Disease Rating Scale (UPDRS-III). By means of multiple linear regression with bootstrapping, the association between UPDRS and Sniffin' Sticks score was investigated while correcting for potential confounders. A Bonferroni corrected P-value of 0.007 was used. Higher UPDRS scores significantly predicted worse olfactory identification in patients with non-affective psychosis with an unadjusted b = -0.07 (95% CI -0.10 to -0.04) and an adjusted b = -0.04 (95% CI -0.07 to -0.01). Results provide preliminary evidence that the same vulnerability may underlie the development of parkinsonism and OIDs in patients with non-affective psychosis. Further investigation should evaluate the clinical value of OIDs as a marker of dopaminergic vulnerability that may predict psychosis. © 2014 Wiley Publishing Asia Pty Ltd.

Evaluation of olfaction and taste function in type 2 diabetic patients with and without peripheral neuropathy.

PubMed

Yazla, Semih; Özmen, Süay; Kıyıcı, Sinem; Yıldız, Demet; Haksever, Mehmet; Gencay, Sündüz

2018-03-01

Olfaction and gustation in patients with diabetes mellitus have great significance on quality of life, and their impairment may result in possible hazards. A limited number of studies have been performed to determine the alteration of both gustatory and olfactory function in type 2 diabetic patients with diabetic peripheral neuropathy (DPN). The aim of this study was to determine whether type 2 diabetic patients, with and without DPN, exhibit major olfactory and gustatory dysfunction using validated and dependable techniques. An observational-analytical case-control study was conducted. Sixty patients with type 2 diabetes mellitus (T2DM) and 30 healthy control subjects with a mean age of 57.1 ± 8.4 were included in the study. Patients with T2DM were recruited from the endocrinology outpatient clinic. After clinical evaluation and electromyography examination, patients with T2DM were divided into the 2 groups, with and without DPN. After a 10-hour fasting period, blood samples were taken for the measurement of serum creatinine, lipids, and HbA1c. For the quantitative assessment of olfactory function, all participants underwent butanol threshold test and odour identification test. Gustatory function was tested administering a whole-mouth above-threshold test using sucrose solutions. The control subjects showed significantly higher Sniffin' sticks and butanol threshold scores than the diabetic patients without DPN (P = .001 and P = .009). No significant difference was found in the gustatory function test between these 2 groups (P = .116). Diabetic patients with DPN had lower Sniffin' sticks scores, butanol threshold scores, and higher sucrose thresholds compared to the controls (P < .001, P < .001, and P = .002). There were no significant differences between diabetic patients with or without DPN regarding Sniffin' sticks scores, butanol threshold, and sucrose thresholds (P = .302, P = .181, and P = .118). In conclusion, this study demonstrates that T2DM is associated with olfactory and gustatory dysfunction. The fact that there was no difference between the diabetic patients with and without DPN elicits the idea of central neuropathy. This novel finding might facilitate the addition of olfactory and gustatory tests to the methodological spectrum of afferent pathway investigations. Copyright © 2017 John Wiley & Sons, Ltd.

Modified carbon fibers to improve composite properties. [sizing fibers for reduced electrical conductivity and adhesion during combustion

NASA Technical Reports Server (NTRS)

Shepler, R. E.

1979-01-01

Thin coatings, 5 to 10 wt. percent, were applied to PAN-based carbon fibers. These coatings were intended to make the carbon fibers less electrically conductive or to cause fibers to stick together when a carbon fiber/epoxy composite burned. The effectiveness of the coatings in these regards was evaluated in burn tests with a test rig designed to simulate burning, impact and wind conditions which might release carbon fibers. The effect of the coatings on fiber and composite properties and handling was also investigated. Attempts at sizing carbon fibers with silicon dioxide, silicon carbide and boron nitride meet with varying degrees of success; however, none of these materials provided an electrically nonconductive coating. Coatings intended to stick carbon fibers together after a composite burned were sodium silicate, silica gel, ethyl silicate, boric acid and ammonium borate. Of these, only the sodium silicate and silica gel provided any sticking together of fibers. The amount of sticking was insufficient to achieve the desired objectives.

Heat transfer with hockey-stick steam generator. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moody, E; Gabler, M J

1977-11-01

The hockey-stick modular design concept is a good answer to future needs for reliable, economic LMFBR steam generators. The concept was successfully demonstrated in the 30 Mwt MSG test unit; scaled up versions are currently in fabrication for CRBRP usage, and further scaling has been accomplished for PLBR applications. Design and performance characteristics are presented for the three generations of hockey-stick steam generators. The key features of the design are presented based on extensive analytical effort backed up by extensive ancillary test data. The bases for and actual performance evaluations are presented with emphasis on the CRBRP design. The designmore » effort on these units has resulted in the development of analytical techniques that are directly applicable to steam generators for any LMFBR application. In conclusion, the hockey-stick steam generator concept has been proven to perform both thermally and hydraulically as predicted. The heat transfer characteristics are well defined, and proven analytical techniques are available as are personnel experienced in their use.« less

Do Visually Impaired People Develop Superior Smell Ability?

PubMed

Majchrzak, Dorota; Eberhard, Julia; Kalaus, Barbara; Wagner, Karl-Heinz

2017-10-01

It is well known that visually impaired people perform better in orientation by sound than sighted individuals, but it is not clear whether this enhanced awareness also extends to other senses. Therefore, the aim of this study was to observe whether visually impaired subjects develop superior abilities in olfactory perception to compensate for their lack of vision. We investigated the odor perception of visually impaired individuals aged 7 to 89 ( n = 99; 52 women, 47 men) and compared them with subjects of a control group aged 8 to 82 years ( n = 100; 45 women, 55 men) without any visual impairment. The participants were evaluated by Sniffin' Sticks odor identification and discrimination test. Identification ability was assessed for 16 common odors presented in felt-tip pens. In the odor discrimination task, subjects had to determine which of three pens in 16 triplets had a different odor. The median number of correctly identified odorant pens in both groups was the same, 13 of the offered 16. In the discrimination test, there was also no significant difference observed. Gender did not influence results. Age-related changes were observed in both groups with olfactory perception decreasing after the age of 51. We could not confirm that visually impaired people were better in smell identification and discrimination ability than sighted individuals.

Construction of a dual axis force reflection stick and test station

NASA Astrophysics Data System (ADS)

Repperger, Daniel E.; Scarborough, Eric L.; Chelette, Tamara L.

1991-11-01

This report describes the construction of a dual axis force reflecting stick controller and test station which was constructed through the use of basic research funds (ILIR monies). The prototype described in this report is powered only by electric motors and used the latest technology in computers. This was an advancement over a previous prototype which involved pneumatic devices and was very large, bulky, and awkward to use. An experiment was conducted with 5 subjects as described herein to test the overall system for its use in experimental design. The motivation for developing such a small test station for the use of force reflection in stick controllers is because with this new compact and portable system, many new applications now appear for this technology. The system described herein minimizes both weight and electric power requirements to produce the same force reflection. By upgrading the technology in the components used in this test station, wider use of force reflection is now available for a host of new applications.

Transport of Sputtered Carbon During Ground-Based Life Testing of Ion Thrusters

NASA Technical Reports Server (NTRS)

Marker, Colin L.; Clemons, Lucas A.; Banks, Bruce A.; Miller, Sharon; Snyder, Aaron; Hung, Ching-Cheh; Karniotis, Christina A.; Waters, Deborah L.

2005-01-01

High voltage, high power electron bombardment ion thrusters needed for deep space missions will be required to be operated for long durations in space as well as during ground laboratory life testing. Carbon based ion optics are being considered for such thrusters. The sputter deposition of carbon and arc vaporized carbon flakes from long duration operation of ion thrusters can result in deposition on insulating surfaces, causing them to become conducting. Because the sticking coefficient is less than one, secondary deposition needs to be considered to assure that shorting of critical components does not occur. The sticking coefficient for sputtered carbon and arc vaporized carbon is measured as well as directional ejection distribution data for carbon that does not stick upon first impact.

Factors affecting the sticking of insects on modified aircraft wings

NASA Technical Reports Server (NTRS)

Yi, O.; Chitsaz-Z, M. R.; Eiss, N. S.; Wightman, J. P.

1987-01-01

Past studies have shown that the surface energy of a polymer coating has an important effect on the sticking of insects to the surface. However, mechanical properties of polymer coatings such as elasticity may also be important. A further study is suggested using polymer coatings of known surface energy and modulus so that a better understanding of the mechanism of the sticking of insects to surfaces can be achieved. As the first step for the study, surface analysis and road tests were performed using elastomers having different energies and different moduli. The number of insects sticking to each elastomer was counted and compared from sample to sample and with a control (aluminum). An average height moment was also calculated and comparisons made between samples.

Membrane Distillation of Meat Industry Effluent with Hydrophilic Polyurethane Coated Polytetrafluoroethylene Membranes

PubMed Central

Mostafa, M. G.; Zhu, Bo; Cran, Marlene; Dow, Noel; Milne, Nicholas; Desai, Dilip

2017-01-01

Meat rendering operations produce stick water waste which is rich in proteins, fats, and minerals. Membrane distillation (MD) may further recover water and valuable solids, but hydrophobic membranes are contaminated by the fats. Here, commercial hydrophobic polytetrafluorethylene (PTFE) membranes with a hydrophilic polyurethane surface layer (PU-PTFE) are used for the first time for direct contact MD (DCMD) on real poultry, fish, and bovine stick waters. Metal membrane microfiltration (MMF) was also used to capture fats prior to MD. Although the standard hydrophobic PTFE membranes failed rapidly, PU-PTFE membranes effectively processed all stick water samples to colourless permeate with sodium rejections >99%. Initial clean solution fluxes 5–6 L/m2/h declined to less than half during short 40% water recovery tests for all stick water samples. Fish stick water uniquely showed reduced fouling and up to 78% water recovery. Lost flux was easily restored by rinsing the membrane with clean water. MMF prior to MD removed 92% of fats, facilitating superior MD performance. Differences in fouling between stick waters were attributed to temperature polarisation from higher melt temperature fats and relative proportions to proteins. Hydrophilic coated MD membranes are applicable to stick water processing but further studies should consider membrane cleaning and longer-term stability. PMID:28961203

Effects of nutritional status and cognitive ability on olfactory function in geriatric patients.

PubMed

Jin, Sung-Yong; Jeong, Hye Seon; Lee, Jin Woo; Kwon, Ki Ryun; Rha, Ki-Sang; Kim, Yong Min

2016-02-01

The aim of this study was to investigate the prevalence of olfactory dysfunction and evaluate the relationship between olfactory function and nutritional status, comorbidity, and the results of a neurocognitive test in geriatric patients who do not suffer from neurodegenerative disease. A total of 45 patients who visited the Geriatric Health Center of Chungnam National University Hospital were enrolled in this study. Olfactory function was assessed using a Korean Version of Sniffin' Stick Test II. Cognitive status of all participants was assessed with the MMSE-K (Korean version of the Mini-Mental State Examination). Nutritional status was assessed with body mass index, Mini-Nutritional Assessment (MNA), and serum total protein and albumin. A total of 45 participants were enrolled in this study. Of these subjects, 28 were men and 17 were women, with a mean age of 71.7±5.16 years. Nine (20%) were normosmia, 13 (28.9%) were hyposmia, and 23 (51.1%) were anosmia. Thirty-six patients (80%) suffered from olfactory dysfunction (anosmia or hyposmia). MMSE score showed significant correlation with MNA score. There were significant negative correlations between age and total TDI (threshold, discrimination, and identification) score, discrimination score, identification score, and MMSE score. MMSE score showed significant correlation with discrimination score and identification score. However, MNA score did not show any significant correlation with olfactory function test results. Although olfactory function was not influenced by nutritional status, abilities of discrimination and identification of odors were associated with cognitive function in geriatric patients. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Acceptability and feasibility of HIV testing in general medicine by ELISA or rapid test from finger-stick whole blood.

PubMed

Demorat, Hubert; Lopes, Amanda; Chopin, Dorothée; Delcey, Véronique; Clevenbergh, Philippe; Simoneau, Guy; Evans, John; Mouly, Stéphane; Bergmann, Jean-François; Sellier, Pierre

2018-02-01

Guidelines recommend routine universal HIV testing in adults to reduce the pool of infected patients unaware of their status, without specific recommendations concerning the method. We compared acceptability and feasibility of HIV testing by ELISA tests or rapid tests from finger-stick whole blood. Prospective randomized multi-center study comparing acceptability and feasibility of routine universal HIV testing by ELISA tests, with a charge, subsequently reimbursed by Social Security for affiliated patients, or rapid tests from finger-stick whole blood, without any charge from the patients or the general practitioner for the study. A single investigator performed all interventions. After consent, all adults (18-70 years old) consulting their general practitioner in Paris, France, unaware of their status, were enrolled. Testing was performed immediately for the patients in the rapid test arm; a prescription was given for testing in a lab for the patients in the ELISA arm. The primary endpoint was acceptability of each method. The secondary endpoint was feasibility of each method, assessed one month after the consultation. Two hundred and seventy patients were enrolled: 133 patients in the ELISA arm, 137 in the rapid test arm. Acceptability of the rapid test (92%) was higher than that of the ELISA (63.9%), P<0.0001. Feasibility of the rapid test (100%) was higher than that of the ELISA (50.5%), P<0.0001. A center effect was shown concerning feasibility of ELISA but not concerning feasibility of rapid tests. Rapid testing from finger-stick whole blood is more acceptable and feasible than ELISA for routine universal HIV testing. A larger use of rapid tests, ideally free of charge, by general practitioners could reduce the pool of infected patients unaware of their status. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

[Age-related changes of sensory system].

PubMed

Iwamoto, Toshihiko; Hanyu, Haruo; Umahara, Takahiko

2013-10-01

Pathological processes usually superimpose on physiological aging even in the sensory system including visual, hearing, olfactory, taste and somatosensory functions. Representative changes of age-related changes are presbyopia, cataracts, and presbyacusis. Reduced sense of smell is seen in normal aging, but the prominent reduction detected by the odor stick identification test is noticed especially in early stage of Alzheimer or Parkinson disease. Reduced sense of taste is well-known especially in salty sense, while the changes of sweet, bitter, and sour tastes are different among individuals. Finally, deep sensation of vibration and proprioception is decreased with age as well as superficial sensation (touch, temperature, pain). As a result, impaired sensory system could induce deterioration of the activities of daily living and quality of life in the elderly.

The Los Alamos Gap Stick Test

NASA Astrophysics Data System (ADS)

Preston, Daniel; Hill, Larry; Johnson, Carl

2015-06-01

In this paper we describe a novel shock sensitivity test, the Gap Stick Test, which is a generalized variant of the ubiquitous Gap Test. Despite the popularity of the Gap Test, it has some disadvantages: multiple tests must be fired to obtain a single metric, and many tests must be fired to obtain its value to high precision and confidence. Our solution is a test wherein multiple gap tests are joined in series to form a rate stick. The complex re-initiation character of the traditional gap test is thereby retained, but the propagation speed is steady when measured at periodic intervals, and initiation delay in individual segments acts to decrement the average speed. We measure the shock arrival time before and after each inert gap, and compute the average detonation speed through the HE alone (discounting the gap thicknesses). We perform tests for a range of gap thicknesses. We then plot the aforementioned propagation speed as a function of gap thickness. The resulting curve has the same basic structure as a Diameter Effect (DE) curve, and (like the DE curve) terminates at a failure point. Comparison between experiment and hydrocode calculations using ALE3D and the Ignition and Growth reactive burn model calibrated for short duration shock inputs in PBX 9501 is discussed.

Nonneutral plasma diagnostic commissioning for the ALPHA Antihydrogen experiment

NASA Astrophysics Data System (ADS)

Konewko, S.; Friesen, T.; Tharp, T. D.; Alpha Collaboration

2017-10-01

The ALPHA experiment at CERN creates antihydrogen by mixing antiproton and positron plasmas. Diagnostic measurements of the precursor plasmas are performed using a diagnostic suite, colloquially known as the ``stick.'' This stick has a variety of sensors and is able to move to various heights to align the desired diagnostic with the beamline. A cylindrical electrode, a faraday cup, an electron gun, and a microchannel-plate detector (MCP) are regularly used to control and diagnose plasmas in ALPHA. We have designed, built, and tested a new, upgraded stick which includes measurement capabilities in both beamline directions.

[Evaluation of olfaction in healthy subjects using the Sniffing Sticks battery].

PubMed

Hudson, Lorena; Silva, M Consuelo; Núñez, Juan Cristóbal; Gómez, Rodrigo; Venegas-Francke, Pablo

2012-04-01

Olfaction dysfunction is linked to neurodegenerative diseases, therefore the evaluation of this function is becoming important To evaluate olfaction in healthy participants. We evaluated 44 healthy males and 55 females, aged 21 to 89 years with the Sniffing Sticks battery to determine normal values in Chilean population. During the test, participants must correctly identify 12 different odors. Normal olfaction, hyposmia and anosmia were defined. An age related decline in olfaction was observed, especially among males aged 59 years or more. This study provides age and gender specific normal values for the Sniffing Sticks battery.

Defensive Spiroketals from Asceles glaber (Phasmatodea): Absolute Configuration and Effects on Ants and Mosquitoes

USDA-ARS?s Scientific Manuscript database

Recently we discovered that the defensive spray of Asceles glaber, a stick insect native to Thailand, contains two spiroketals (major: 2(S)-(-)-(E,E)-2- methyl-1,7-dioxaspiro[5.5]undecane and minor: 2-ethyl-1,6-dioxaspiro[4.5]decane) and glucose. In this report we: 1) illustrate the identification o...

Preservice Teachers' Problem Solving: A Study of Problem Identification and Engagement Style Using the LIBRE Model

ERIC Educational Resources Information Center

Castro-Villarreal, Felicia; Guerra, Norma S.

2012-01-01

In this study, we examine 122 preservice teachers' reported problems and assessed engagement styles using the LIBRE model stick figure. Qualitative and descriptive data were gathered using (1) a qualitative problem-solving activity to identify preservice teachers' problems and engagement preferences and (2) descriptive analyses to depict and…

Comparative evaluation of the antimicrobial efficacy of four chewing sticks commonly used in South India: an in vitro study.

PubMed

Elangovan, Arun; Muranga, Jayanthi; Joseph, Elizabeth

2012-01-01

The use of chewing sticks has been well documented since ancient times in India. Chewing sticks are a good alternative to the toothbrush for maintaining oral hygiene. The present study was designed and conducted to compare and evaluate the antimicrobial effects of the aqueous extracts of neem, miswak, mango, and banyan chewing sticks against two bacterial species considered the most important in the initiation and progression of dental caries, namely Streptococcus mutans and Lactobacillus acidophilus, respectively. Twigs of the above mentioned chewing sticks were sun dried and powdered, and sterile aqueous solutions of 10%, 25% and 50% concentrations were prepared. Culture plates for S mutans and L acidophilus were prepared and the growth was transferred to nutrient agar and Mueller-Hinton agar; antimicrobial activity of the extracts was tested after 72 h, using the disc diffusion method. Normal saline was used as control. The antimicrobial activity of neem, miswak, and mango extracts increased as their concentrations increased. Both banyan extract and saline showed no antimicrobial activity against the organisms tested. Based on the zones of inhibition, aqueous extracts of neem showed the most antimicrobial activity against S mutans, while miswak extracts showed superior antimicrobial activity against L acidophilus. We recommend further phytochemical and pharmacological studies to discover newer nonsynthetic tooth pastes and mouthwashes.

Ground Simulator Studies of the Effects of Valve Friction, Stick Friction, Flexibility, and Backwash on Power Control System Quality

NASA Technical Reports Server (NTRS)

Brown, B Porter

1958-01-01

Report presents results of tests made on a power control system by means of a ground simulator to determine the effects of various combinations of valve friction and stick friction on the ability of the pilot to control the system. Various friction conditions were simulated with a rigid control system, a flexible system, and a rigid system having some backlash. For the tests, the period and damping of the simulated airplane were held constant.

Flight Control System Reliability and Maintainability Investigations

DTIC Science & Technology

1975-03-01

the left forward horn of the swash - plate . Pilot’s Cyclic Control Stick The conventional type control stick, mounted in the ... the requirement? 3. Acceptability - Is the effort/cost worth the gain in R&M7 These tests were applied to the flight control system speci- fication...quantitative R&M requirements on the specifications in Figure 1. Standard Components

Effect of Trap Color, Height, and Orientation on the Capture of Yellow and Stick Tea Thrips (Thysanoptera: Thripidae) and Nontarget Insects in Tea Gardens.

PubMed

Bian, L; Yang, P X; Yao, Y J; Luo, Z X; Cai, X M; Chen, Z M

2016-02-03

Two thrips species-the yellow tea thrips (Scirtothrips dorsalis Hood) and the stick tea thrips (Dendrothrips minowai Priesner)-are serious pests affecting tea plants in southern China. Although the stick tea thrips is primarily restricted to southern China, the yellow tea thrips is gradually proliferating worldwide. Colored sticky card traps may be useful for monitoring and capturing these species, but a systematic analysis has not been conducted to identify the most effective trap color, height, and orientation. We performed indoor experiments using an orthogonal experimental design, as well as field tests in tea gardens, to identify the color most attractive to the two thrips species. Field tests were then conducted using color-optimized traps-lawngreen (RGB: 124, 252, 0) for yellow thrips and lime (RGB: 0, 255, 0) for stick tea thrips-to determine the most effective trap height and orientation. The greatest numbers of both yellow and stick tea thrips were captured on traps positioned 0-20 cm above the tea canopy in an east-west orientation. We also evaluated the performance of the color-optimized sticky card traps compared with commercially available yellow ones. Significantly more yellow and stick tea thrips and fewer natural enemies were captured on the color-optimized traps than on commercial ones. Although additional research is needed to explain the responses of the two different species and to increase trap effectiveness, our findings should assist in the control of these harmful insects. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Identification of the meta-instability stage via synergy of fault displacement: An experimental study based on the digital image correlation method

NASA Astrophysics Data System (ADS)

Zhuo, Yan-Qun; Ma, Jin; Guo, Yan-Shuang; Ji, Yun-Tao

In stick-slip experiments modeling the occurrence of earthquakes, the meta-instability stage (MIS) is the process that occurs between the peak differential stress and the onset of sudden stress drop. The MIS is the final stage before a fault becomes unstable. Thus, identification of the MIS can help to assess the proximity of the fault to the earthquake critical time. A series of stick-slip experiments on a simulated strike-slip fault were conducted using a biaxial servo-controlled press machine. Digital images of the sample surface were obtained via a high speed camera and processed using a digital image correlation method for analysis of the fault displacement field. Two parameters, A and S, are defined based on fault displacement. A, the normalized length of local pre-slip areas identified by the strike-slip component of fault displacement, is the ratio of the total length of the local pre-slip areas to the length of the fault within the observed areas and quantifies the growth of local unstable areas along the fault. S, the normalized entropy of fault displacement directions, is derived from Shannon entropy and quantifies the disorder of fault displacement directions along the fault. Based on the fault displacement field of three stick-slip events under different loading rates, the experimental results show the following: (1) Both A and S can be expressed as power functions of the normalized time during the non-linearity stage and the MIS. The peak curvatures of A and S represent the onsets of the distinct increase of A and the distinct reduction of S, respectively. (2) During each stick-slip event, the fault evolves into the MIS soon after the curvatures of both A and S reach their peak values, which indicates that the MIS is a synergetic process from independent to cooperative behavior among various parts of a fault and can be approximately identified via the peak curvatures of A and S. A possible application of these experimental results to field conditions is provided. However, further validation is required via additional experiments and exercises.

Evaluation of rheological, bioactives and baking characteristics of mango ginger (curcuma amada) enriched soup sticks.

PubMed

Crassina, K; Sudha, M L

2015-09-01

Wheat flour was replaced with mango ginger powder (MGP) at 0, 5, 10 and 15 %. Influence of MGP on rheological and baking characteristics was studied. Farinograph was used to study the mixing profile of wheat flour-MGP blend. Pasting profile of the blends namely gelatinization and retrogradation were carried out using micro-visco-amylograph. Test baking was done to obtain the optimum level of replacement and processing conditions. Sensory attributes consisting texture, taste, overall quality and breaking strength were assessed. Nutritional characterization of the soup sticks in terms of protein and starch in vitro digestibility, dietary fiber, minerals, polyphenols and antioxidant activity were determined using standard methods. With the increasing levels of MGP from 0 to 15 %, the farinograph water absorption increased from 60 to 66.7 %. A marginal increase in the gelatinization temperature from 65.4 to 66.2 °C was observed. Retrogradation of gelatinized starch granules decreased with the addition of MGP. The results indicated that the soup stick with 10 % MG had acceptable sensory attributes. The soup stick showed further improvement in terms of texture and breaking strength with the addition of gluten powder, potassium bromate and glycerol monostearate. The total dietary fiber and antioxidant activity of the soup sticks having 10 % MGP increased from 3.31 to 8.64 % and 26.83 to 48.06 % respectively as compared to the control soup sticks. MGP in soup sticks improved the nutritional profile.

Flight Measurements to Determine Effect of a Spring-Loaded Tab on Longitudinal Stability of an Airplane

NASA Technical Reports Server (NTRS)

Hunter, Paul A.; Reeder, John P.

1946-01-01

In conjunction with a program of research on the general problem of stability of airplanes in the climbing condition, tests have been made of a spring-loaded tb which. is referred to as a ?springy tab,? installed on the elevator of a low-wing scout bomber. The tab was arranged to deflect upward with decrease in speed which caused an increase in the pull force required to trim at low speeds and thereby increased the stick-free static longitudinal stability of the airplane. It was found that the springy tab would increase the stick-free stability in all flight conditions, would reduce the danger of inadvertent stalling because of the definite pull force required to stall the airplane with power on, would reduce the effect of center-of-gravity position on stick-free static stability, and would have little effect on the elevator stick forces in accelerated f11ght. Another advantage of the springy tab is that it might be used to provide almost any desired variation of elevator stick force with speed by adjusting the tab hinge-moment characteristics and the variation of spring moment with tab deflection. Unlike the bungee and the bobweight, the springy tab would provide stick-free static stability without requiring a pull force to hold the stick back while taxying. A device similar to the springy tab may be used on the rudder or ailerons to eliminate undesirable trim-force variations with speed.

Usefulness of Leukocyte Esterase Test Versus Rapid Strep Test for Diagnosis of Acute Strep Pharyngitis.

PubMed

Nibhanipudi, Kumara V

2015-01-01

A study to compare the usage of throat swab testing for leukocyte esterase on a test strip(urine dip stick-multi stick) to rapid strep test for rapid diagnosis of Group A Beta hemolytic streptococci in cases of acute pharyngitis in children. The testing of throat swab for leukocyte esterase on test strip currently used for urine testing may be used to detect throat infection and might be as useful as rapid strep. All patients who come with a complaint of sore throat and fever were examined clinically for erythema of pharynx, tonsils and also for any exudates. Informed consent was obtained from the parents and assent from the subjects. 3 swabs were taken from pharyngo-tonsillar region, testing for culture, rapid strep & Leukocyte Esterase. Total number is 100. Cultures 9(+); for rapid strep== 84(-) and16 (+); For LE== 80(-) and 20(+) From data configuration Rapid Strep versus LE test don't seem to be a random (independent) assignment but extremely aligned. The Statistical results show rapid and LE show very agreeable results. Calculated Value of Chi Squared Exceeds Tabulated under 1 Degree Of Freedom (P<.0.0001) reject Null HYPOTHESIS and Conclude Alternative Conclusions: Leukocyte esterase on throat swab is as useful as rapid strep test for rapid diagnosis of strep pharyngitis on test strip currently used for urine dip stick causing acute pharyngitis in children.

Preliminary Exploration of Adaptive State Predictor Based Human Operator Modeling

NASA Technical Reports Server (NTRS)

Trujillo, Anna C.; Gregory, Irene M.

2012-01-01

Control-theoretic modeling of the human operator dynamic behavior in manual control tasks has a long and rich history. In the last two decades, there has been a renewed interest in modeling the human operator. There has also been significant work on techniques used to identify the pilot model of a given structure. The purpose of this research is to attempt to go beyond pilot identification based on collected experimental data and to develop a predictor of pilot behavior. An experiment was conducted to quantify the effects of changing aircraft dynamics on an operator s ability to track a signal in order to eventually model a pilot adapting to changing aircraft dynamics. A gradient descent estimator and a least squares estimator with exponential forgetting used these data to predict pilot stick input. The results indicate that individual pilot characteristics and vehicle dynamics did not affect the accuracy of either estimator method to estimate pilot stick input. These methods also were able to predict pilot stick input during changing aircraft dynamics and they may have the capability to detect a change in a subject due to workload, engagement, etc., or the effects of changes in vehicle dynamics on the pilot.

Interactions of extracts from selected chewing stick sources with Aggregatibacter actinomycetemcomitans

PubMed Central

2012-01-01

Background Aggregatibacter actinomycetemcomitans produces a leukotoxin that activates a pro-inflammatory death of human monocytes/macrophages. A specific clone of this bacterium (JP2) has a 530-base pair deletion in the leukotoxin promoter gene and significantly enhanced expression of leukotoxin. This specific clone of A. actinomycetemcomitans is common in some African populations and has a strong association with periodontal attachment loss in adolescents in these populations. Chewing sticks of plant origin are commonly used as oral hygiene tool in Africa, but their role as a therapeutic agent in periodontal disease is poorly investigated. Results Ethanol extracts were made from 7 common plants used as chewing sticks in West-Africa. None of the tested extracts inhibited growth of A. actinomycetemcomitans. However, extracts from Psidium guajava (Guava) completely neutralized the cell death and pro-inflammatory response of human leukocytes induced by the leukotoxin. None of the six other tested chewing stick extracts showed this effect. Conclusions The discovery that extracts from Guava efficiently neutralizes A. actinomycetemcomitans leukotoxicity might lead to novel therapeutic agents and strategies for prevention and treatment of aggressive forms of periodontitis induced by infections with the highly leukotoxic JP2 clone of this bacterium. PMID:22537711

A complex systems analysis of stick-slip dynamics of a laboratory fault

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, David M.; Tordesillas, Antoinette, E-mail: atordesi@unimelb.edu.au; Small, Michael

2014-03-15

We study the stick-slip behavior of a granular bed of photoelastic disks sheared by a rough slider pulled along the surface. Time series of a proxy for granular friction are examined using complex systems methods to characterize the observed stick-slip dynamics of this laboratory fault. Nonlinear surrogate time series methods show that the stick-slip behavior appears more complex than a periodic dynamics description. Phase space embedding methods show that the dynamics can be locally captured within a four to six dimensional subspace. These slider time series also provide an experimental test for recent complex network methods. Phase space networks, constructedmore » by connecting nearby phase space points, proved useful in capturing the key features of the dynamics. In particular, network communities could be associated to slip events and the ranking of small network subgraphs exhibited a heretofore unreported ordering.« less

Field evaluation of New Mountain Sandalwood Mosquito Sticks and New Mountain Sandalwood Botanical Repellent against mosquitoes in North Queensland, Australia.

PubMed

Ritchie, Scott A; Williams, Craig R; Montgomery, Brian L

2006-03-01

The mosquito repellent efficacy of New Mountain Sandalwood Mosquito Sticks (containing 0.5% w/w essential oils) and New Mountain Sandalwood Botanical Repellent (containing soybean and geranium oils) was assessed. Tests were conducted in the field with 4 volunteers in a wooded area near Cairns, North Queensland, Australia. Predominant biting species were Verrallina funerea and Ve. lineata. A pair of burning Mosquito Sticks immediately upwind of the subject (acting as an area repellent) provided a 73.1% mean reduction in mosquito landing and probing over the 3-h test period. The Botanical Repellent and a DEET-based control were both 100% effective in preventing mosquito probing for 3 h. These data are consistent with other studies of area repellents in that such products provide significant protection from mosquito bites, albeit inferior to the protection provided by topically applied repellents.

Ovulation home test

MedlinePlus

... test (home test); Ovulation prediction test; Ovulation predictor kit; Urinary LH immunoassays; At-home ovulation prediction test; ... Ovulation prediction test kits most often come with five to seven sticks. You may need to test for several days to detect a ...

Association between major depressive disorder and odor identification impairment.

PubMed

Khil, Laura; Rahe, Corinna; Wellmann, Jürgen; Baune, Bernhard T; Wersching, Heike; Berger, Klaus

2016-10-01

There is evidence of olfactory deficits in patients with major depressive disorder (MDD) but causes and mechanisms are largely unknown. We compared 728 patients with current MDD and 555 non-depressed controls regarding odor identification impairment taking into account the severity of acute symptoms and of the disease course. We assessed current symptom severity with the Hamilton Depression Rating Scale, and disease course severity based on admission diagnosis (ICD-10, F32/F33) and self-reported hospitalization frequency, defined as infrequent (<2) and frequent (≥2) depression-related hospitalizations under constant disease duration. A score of <10 on the Sniffin' Sticks-Screen-12 test determined the presence of odor identification impairment. Compared to non-depressed controls patients with frequent (rapidly recurring) hospitalizations had an elevated chance of odor identification impairment, even after adjustment for smell-influencing factors, such as age and smoking, (OR=1.7; 95% CI 1.0-2.9). Patients with recurrent MDD (F33) also had an elevated odds of odor identification impairment compared to those with a first-time episode (F32, OR=1.5; 95% CI 1.0-2.4). In patients with a first-time episode the chance of odor identification impairment increased by 7% with each point increase in the Hamilton Score. Cross-sectional study. Variation in the use of psychotropic medication is a potential bias. Odor identification impairment was evident in MDD patients with first-time high symptom severity and in patients with a severe disease course. Whether odor identification impairment is a marker or mediator of structural and functional brain changes associated with acute or active MDD requires further investigations in longitudinal studies. Copyright © 2016 Elsevier B.V. All rights reserved.

All great ape species (Gorilla gorilla, Pan paniscus, Pan troglodytes, Pongo abelii) and two-and-a-half-year-old children (Homo sapiens) discriminate appearance from reality.

PubMed

Karg, Katja; Schmelz, Martin; Call, Josep; Tomasello, Michael

2014-11-01

Nonhuman great apes and human children were tested for an understanding that appearance does not always correspond to reality. Subjects were 29 great apes (bonobos [Pan paniscus], chimpanzees [Pan troglodytes], gorillas [Gorilla gorilla], and orangutans [Pongo abelii]) and 24 2½-year-old children. In our task, we occluded portions of 1 large and 1 small food stick such that the size relations seemed reversed. Subjects could then choose which one they wanted. There was 1 control condition and 2 experimental conditions (administered within subjects). In the control condition subjects saw only the apparent stick sizes, whereas in the 2 experimental conditions they saw the true stick sizes as well (the difference between them being what the subjects saw first: the apparent or the real stick sizes). All great ape species and children successfully identified the bigger stick, despite its smaller appearance, in the experimental conditions, but not in the control. We discuss these results in relation to the understanding of object permanence and conservation, and exclude reversed reward contingency learning as an explanation. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

Usefulness of Leukocyte Esterase Test Versus Rapid Strep Test for Diagnosis of Acute Strep Pharyngitis

PubMed Central

2015-01-01

Objective: A study to compare the usage of throat swab testing for leukocyte esterase on a test strip(urine dip stick-multi stick) to rapid strep test for rapid diagnosis of Group A Beta hemolytic streptococci in cases of acute pharyngitis in children. Hypothesis: The testing of throat swab for leukocyte esterase on test strip currently used for urine testing may be used to detect throat infection and might be as useful as rapid strep. Methods: All patients who come with a complaint of sore throat and fever were examined clinically for erythema of pharynx, tonsils and also for any exudates. Informed consent was obtained from the parents and assent from the subjects. 3 swabs were taken from pharyngo-tonsillar region, testing for culture, rapid strep & Leukocyte Esterase. Results: Total number is 100. Cultures 9(+); for rapid strep== 84(-) and16 (+); For LE== 80(-) and 20(+) Statistics: From data configuration Rapid Strep versus LE test don’t seem to be a random (independent) assignment but extremely aligned. The Statistical results show rapid and LE show very agreeable results. Calculated Value of Chi Squared Exceeds Tabulated under 1 Degree Of Freedom (P<.0.0001) reject Null Hypothesis and Conclude Alternative Conclusions: Leukocyte esterase on throat swab is as useful as rapid strep test for rapid diagnosis of strep pharyngitis on test strip currently used for urine dip stick causing acute pharyngitis in children. PMID:27335975

Risk of decline and chance of improvement in olfaction among patients with post-traumatic olfactory loss.

PubMed

Kuo, C-L; Shu, C-H

2015-12-01

To evaluate the chance of improvement and risk of decline in olfaction among patients with post-traumatic olfactory loss. This study comprised 80 patients. Changes in olfaction were determined using a visual analogue scale and the 'Sniffin' Sticks' test. Logistic regression was used to identify predictors for olfactory changes. Olfactory changes were observed in 9-35 per cent of patients. The rates of improvement and decline according to visual analogue scale scores were 35 per cent and 10 per cent respectively, whereas those in the Sniffin' Sticks test were 9 per cent and 11 per cent respectively. There was a predictive link between non-anosmia and decline in Sniffin' Sticks test scores (odds ratio = 16.61, p = 0.003). A positive correlation was observed between the scores in the first and last examinations (rho = 0.532, p < 0.001). Patients should be informed that they may experience an improvement or decline in olfaction following post-traumatic olfactory dysfunction. This study provides evidence to support comprehensive counselling regarding prognosis as an integral part of management strategies.

[Clinical observation on auricular point magnetotherapy for treatment of senile low back pain].

PubMed

Sun, Gui-Ping

2007-02-01

To compare the therapeutic effects of auricular point magnetotherapy and auricular point sticking of Vaccaria seed on senile low back pain. Sixty cases, aged 60 or over 60 years with back pain, were randomly divided into 2 groups, a control group and a test group. The control group were treated with auricular sticking of Vaccaria seed with no pressing, and the test group with sticking magnetic bead of 66 gauss each piece with no pressing. Auricular points, Shenmen, Kidney, Bladder, Yaodizhui, Gluteus, Liver and Spleen were selected. Three weeks constituted one course. The effects before, during and after the course were assessed by questionnaire about back pain. Compared with the control group, in the test group the back pain was more effectively improved, including reducing pain and numbness in the back and the legs, decreasing the disorder of physical strength induced by this disease, and improving daily life quality of the patient. Follow-up survey for 2-4 weeks showed the effects still were kept. Auricular magnetotherapy can effectively improve senile back pain.

Swarms of repeating stick-slip icequakes triggered by snow loading at Mount Rainier volcano

NASA Astrophysics Data System (ADS)

Allstadt, Kate; Malone, Stephen D.

2014-05-01

We have detected over 150,000 small (M < 1) low-frequency ( 1-5 Hz) repeating earthquakes over the past decade at Mount Rainier volcano, most of which were previously undetected. They are located high (>3000 m) on the glacier-covered edifice and occur primarily in weeklong to monthlong swarms composed of simultaneous distinct families of events. Each family contains up to thousands of earthquakes repeating at regular intervals as often as every few minutes. Mixed polarity first motions, a linear relationship between recurrence interval and event size, and strong correlation between swarm activity and snowfall suggest the source is stick-slip basal sliding of glaciers. The sudden added weight of snow during winter storms triggers a temporary change from smooth aseismic sliding to seismic stick-slip sliding in locations where basal conditions are favorable to frictional instability. Coda wave interferometry shows that source locations migrate over time at glacial speeds, starting out fast and slowing down over time, indicating a sudden increase in sliding velocity triggers the transition to stick-slip sliding. We propose a hypothesis that this increase is caused by the redistribution of basal fluids rather than direct loading because of a 1-2 day lag between snow loading and earthquake activity. This behavior is specific to winter months because it requires the inefficient drainage of a distributed subglacial drainage system. Identification of the source of these frequent signals offers a view of basal glacier processes, discriminates against alarming volcanic noises, documents short-term effects of weather on the cryosphere, and has implications for repeating earthquakes, in general.

Theoretical Analysis and Bench Tests of a Control-Surface Booster Employing a Variable Displacement Hydraulic Pump

NASA Technical Reports Server (NTRS)

Mathews, Charles W.; Kleckner, Harold F.

1947-01-01

The NACA is conducting a general investigation of servo-mechanisms for use in powering aircraft control surfaces. This paper presents a theoretical analysis and the results of bench tests of a control-booster system which employs a variable displacement hydraulic pump. The booster is intended for use in a flight investigation to determine the effects of various booster parameters on the handling qualities of airplanes. Such a flight investigation would aid in formulating specific requirements concerning the design of control boosters in general. Results of the theoretical analysis and the bench tests indicate that the subject booster is representative of types which show promise of satisfactory performance. The bench tests showed that the following desirable features were inherent in this booster system: (1) No lost motion or play in any part of the system; (2) no detectable lag between motion of the contra1 stick and control surface; and (3) Good agreement between control displacements and stick-force variations with no hysteresis in the stick-force characteristics. The final design configuration of this booster system showed no tendency to oscillate, overshoot, or have other undesirable transient characteristics common to boosters.

Earthquake source properties from instrumented laboratory stick-slip

USGS Publications Warehouse

Kilgore, Brian D.; McGarr, Arthur F.; Beeler, Nicholas M.; Lockner, David A.; Thomas, Marion Y.; Mitchell, Thomas M.; Bhat, Harsha S.

2017-01-01

Stick-slip experiments were performed to determine the influence of the testing apparatus on source properties, develop methods to relate stick-slip to natural earthquakes and examine the hypothesis of McGarr [2012] that the product of stiffness, k, and slip duration, Δt, is scale-independent and the same order as for earthquakes. The experiments use the double-direct shear geometry, Sierra White granite at 2 MPa normal stress and a remote slip rate of 0.2 µm/sec. To determine apparatus effects, disc springs were added to the loading column to vary k. Duration, slip, slip rate, and stress drop decrease with increasing k, consistent with a spring-block slider model. However, neither for the data nor model is kΔt constant; this results from varying stiffness at fixed scale.In contrast, additional analysis of laboratory stick-slip studies from a range of standard testing apparatuses is consistent with McGarr's hypothesis. kΔt is scale-independent, similar to that of earthquakes, equivalent to the ratio of static stress drop to average slip velocity, and similar to the ratio of shear modulus to wavespeed of rock. These properties result from conducting experiments over a range of sample sizes, using rock samples with the same elastic properties as the Earth, and scale-independent design practices.

The femur-tibia control system in a proscopiid (Caelifera, Orthoptera): a test for assumptions on the functional basis and evolution of twig mimesis in stick insects.

PubMed

Wolf, H; Bässler, U; Spiess, R; Kittmann, R

2001-11-01

The extremely slow return movements observed in stick insects (phasmids) after imposed changes in posture are termed catalepsy. In the literature, catalepsy is treated as a behavioural component of the twig mimesis observed in walking stick insects. It is produced by the high gain of the velocity-sensitive component of the relevant joint control systems and by the non-linear dependency of its time constant on movement velocity. The high gain, in turn, causes the system to work close to instability, and this may have driven the evolution of gain control mechanisms. Although these statements represent plausible assumptions, based on correlated occurrence, they remain largely hypothetical like many ideas concerning evolutionary tendencies. To test these hypotheses, we studied catalepsy and the relevant properties of the femur-tibia control system in the middle and hind legs of Prosarthria teretrirostris.cf. Prosarthria teretrirostris is a proscopiid closely related to grasshoppers and locusts. With its slender, green-to-brown body and legs, it shows clear morphological twig mimesis, which has evolved independently of the well-known twig mimesis in stick insects. The animals show clear catalepsy. The main properties of femur-tibia joint control are remarkably similar between proscopiids and stick insects (e.g. the marked sensitivity to movement velocity rather than to joint position and the non-linear dependency of the time constants of response decay on movement velocity), but there are also important differences (habituation and activity-related mechanisms of gain control are absent). Together, these results validate the main concepts that have been developed concerning the neural basis and evolution of catalepsy in stick insects and its relationship to twig mimesis, while demonstrating that ideas on the role of habituation and gain control should be refined.

Carbonyl emissions from a novel heated tobacco product (IQOS): comparison with an e-cigarette and a tobacco cigarette.

PubMed

Farsalinos, Konstantinos E; Yannovits, Nikoletta; Sarri, Theoni; Voudris, Vassilis; Poulas, Konstantinos; Leischow, Scott

2018-06-19

To measure carbonyl emissions from a heated tobacco product (IQOS) in comparison with an e-cigarette (Nautilus Mini) and a commercial tobacco cigarette (Marlboro Red). Regular and menthol variants of the heated tobacco product were tested. A tank-type atomizer was tested with a tobacco-flavoured liquid at 10 W and 14 W. Aerosol and smoke were collected in impingers containing 2,4-dinitrophenylhydrazine. Health Canada Intense and two more intense puffing regimes were used. Analytical laboratory in Greece. Carbonyl levels in the aerosol and smoke. At Health Canada Intense regime, heated tobacco products emitted 5.0-6.4 μg/stick formaldehyde, 144.1-176.7 μg/stick acetaldehyde, 10.4-10.8 μg/stick acrolein, 11.0-12.8 μg/stick propionaldehyde and 1.9-2.0 μg/stick crotonaldehyde. Compared with the tobacco cigarette, levels were on average 91.6% lower for formaldehyde, 84.9% lower for acetaldehyde, 90.6% lower for acrolein, 89.0% lower for propionaldehyde and 95.3% lower for crotonaldehyde. The e-cigarette emitted 0.5-1.0 μg/12 puffs formaldehyde, 0.8-1.5μg/12 puffs acetaldehyde and 0.3-0.4 μg/12 puffs acrolein, but no propionaldehyde and crotonaldehyde. At more intense puffing regimes, formaldehyde was increased in heated tobacco products, but levels were 3 to 4-fold lower compared with the tobacco cigarette. Based on the findings from Health Canada Intense puffing regime, use of 20 heated tobacco sticks would result in 81.7-97.9% reduced carbonyl exposure compared with smoking 20 tobacco cigarettes; the respective reduction in exposure from use of 5 g e-cigarette liquid would be 92.2-99.8%. The IQOS heated tobacco product emits substantially lower levels of carbonyls than a commercial tobacco cigarette (Marlboro Red) but higher levels than a Nautilus Mini e-cigarette. This article is protected by copyright. All rights reserved.

Olfaction and apathy in Alzheimer's disease, mild cognitive impairment, and healthy older adults.

PubMed

Seligman, Sarah C; Kamath, Vidyulata; Giovannetti, Tania; Arnold, Steven E; Moberg, Paul J

2013-01-01

Apathy is a prevalent neuropsychiatric manifestation in individuals with Alzheimer's disease (AD) that is associated with decreased social functioning and increased caregiver burden. Olfactory deficits are also commonly observed in AD, and prior work has indicated a link between increased apathy and olfactory dysfunction in individuals with Parkinson's disease. Here, we examined odor identification performance in patients with probable AD (n = 172), individuals with mild cognitive impairment (MCI; n = 112), and neurologically and psychiatrically healthy older adults (n = 132) and its relation to apathy, depression, and overall psychopathology. Participants were administered the Sniffin' Sticks odor identification test and measures assessing severity of apathy, depression, and overall neuropsychiatric symptomatology. Consistent with previous research, AD and MCI patients were significantly worse at identifying odors than healthy older adults. Additionally, a sex by diagnosis interaction was observed. AD patients had significantly higher levels of apathy relative to MCI and control participants. Of note, across the entire sample odor identification deficits were correlated with level of apathy at the level of p < 0.01, but not with depression or neuropsychiatric symptom severity, when controlling for Mini-Mental State Examination (MMSE) score. Collectively, these data suggest that olfactory disturbance and apathy in AD may result from the progression of disease pathology in shared neural substrates.

Adaptive State Predictor Based Human Operator Modeling on Longitudinal and Lateral Control

NASA Technical Reports Server (NTRS)

Trujillo, Anna C.; Gregory, Irene M.; Hempley, Lucas E.

2015-01-01

Control-theoretic modeling of the human operator dynamic behavior in manual control tasks has a long and rich history. In the last two decades, there has been a renewed interest in modeling the human operator. There has also been significant work on techniques used to identify the pilot model of a given structure. The purpose of this research is to attempt to go beyond pilot identification based on collected experimental data and to develop a predictor of pilot behavior. An experiment was conducted to categorize these interactions of the pilot with an adaptive controller compensating during control surface failures. A general linear in-parameter model structure is used to represent a pilot. Three different estimation methods are explored. A gradient descent estimator (GDE), a least squares estimator with exponential forgetting (LSEEF), and a least squares estimator with bounded gain forgetting (LSEBGF) used the experiment data to predict pilot stick input. Previous results have found that the GDE and LSEEF methods are fairly accurate in predicting longitudinal stick input from commanded pitch. This paper discusses the accuracy of each of the three methods - GDE, LSEEF, and LSEBGF - to predict both pilot longitudinal and lateral stick input from the flight director's commanded pitch and bank attitudes.

Experimental Characterization of Hysteresis in a Revolute Joint for Precision Deployable Structures

NASA Technical Reports Server (NTRS)

Lake, Mark S.; Fung, Jimmy; Gloss, Kevin; Liechty, Derek S.

1997-01-01

Recent studies of the micro-dynamic behavior of a deployable telescope metering truss have identified instabilities in the equilibrium shape of the truss in response to low-energy dynamic loading. Analyses indicate that these micro-dynamic instabilities arise from stick-slip friction within the truss joints (e.g., hinges and latches). The present study characterizes the low-magnitude quasi-static load cycle response of the precision revolute joints incorporated in the deployable telescope metering truss, and specifically, the hysteretic response of these joints caused by stick-slip friction within the joint. Detailed descriptions are presented of the test setup and data reduction algorithms, including discussions of data-error sources and data-filtering techniques. Test results are presented from thirteen specimens, and the effects of joint preload and manufacturing tolerances are investigated. Using a simplified model of stick-slip friction, a relationship is made between joint load-cycle behavior and micro-dynamic dimensional instabilities in the deployable telescope metering truss.

Factors affecting the sticking of insects on modified aircraft wings

NASA Technical Reports Server (NTRS)

Yi, O.; Chitsaz-Z, M. R.; Eiss, N. S.; Wightman, J. P.

1988-01-01

Previous work showed that the total number of insects sticking to an aluminum surface was reduced by coating the aluminum surface with elastomers. Due to a large number of possible experimental errors, no correlation between the modulus of elasticity, the elastomer, and the total number of insects sticking to a given elastomer was obtained. One of the errors assumed to be introduced during the road test is a variable insect flux so the number of insects striking one surface might be different from that striking another sample. To eliminate this source of error, the road test used to collect insects was simulated in a laboratory by development of an insect impacting technique using a pipe and high pressure compressed air. The insects are accelerated by a compressed air gun to high velocities and are then impacted with a stationary target on which the sample is mounted. The velocity of an object exiting from the pipe was determined and further improvement of the technique was achieved to obtain a uniform air velocity distribution.

ICPP: Identification and Quantification of Elementary Plasma Surface Processes during thin Film Growth

NASA Astrophysics Data System (ADS)

Keudell, A. V.

2000-10-01

The quantification of elementary plasma surface processes in glow discharges used for thin film deposition, is mandatory for a complete description of these low temperature plasmas. Since the surface to volume ratio in these discharge systems is often large, all particle densities in the discharge can be strongly influenced by any surface reactions. The identification and quantification of these surface processes will be illustrated for the plasma deposition of amorphous hydrogenated carbon films. A variety of experiments will be discussed ranging from plasma experiments using the cavity technique or ionization threshold mass spectrometry as well as a new class of experiments using quantified radical beams to quantify surface reactions in terms of sticking coefficients directly. It is shown that the reactivity of the hydrocarbon radicals depends strongly on the state of hybridization of the hydrocarbon growth precursor, and that the sticking coefficients for various hydrocarbon radicals are strongly influenced by the simultaneous interaction of several reactive species with the film surface. With the knowledge of these interaction mechanisms and the quantification of the corresponding cross sections, a better understanding of growth processes has become possible, ranging from the deposition of polycrystalline diamond in microwave discharges to the formation of re-deposited layers in fusion experiments.

Alternating Days of Intermittent Hypoxic Exposure (IHE) on Physical and Cognitive Performance

DTIC Science & Technology

2011-03-01

IHE) ( Millet , Roels, Schmitt, Woorons, & Richalet, 2010). Athletes or airmen must be located close to a moderate altitude to perform any of the first...recovery until their heart rate dropped below 120 bpm. At the one-minute recovery stage, the subject received a finger stick for blood lactate collection...recovery, the subject received a finger stick for blood lactate collection. These one-minute post-test lactates were analyzed using the Lactate

The brain structural and cognitive basis of odor identification deficits in mild cognitive impairment and Alzheimer’s disease

PubMed Central

2014-01-01

Background The objectives of this study were to explore the relationship between olfactory impairment, cognitive measures, and brain structure volumes in healthy elderly individuals, compared to patients with amnestic mild cognitive impairment (aMCI) or early Alzheimer’s disease (AD). The primary aim was to elucidate possible differences in cognitive scores and brain structure volumes between aMCI/AD patients with relatively intact odor identification (OI) ability and those with reduced ability. Methods Twelve patients with aMCI, six with early AD, and 30 control subjects were included. OI abilities were assessed with the Brief Smell Identification Test (B-SIT) and Sniffin Sticks Identification Test (SSIT). Neuropsychological tests of executive functions and memory were performed. Brain structural volumes were obtained from T1 weighted 3D MRI at 3 Tesla. Statistical comparisons between the patients with aMCI and AD indicated no significant differences in performance on most tests. Since the groups were small and AD patients were in an early phase of disease, all patients were subsequently considered together as a single group for studying OI. Patients were subdivided into relatively intact (scores >50%) and reduced OI (≤ 50% score) on the olfactory tests. Results The aMCI/AD group with reduced OI ability, as measured by both B-SIT and SSIT, had significantly smaller hippocampal volume as compared to the patient group with OI scores > 50%. There was a significant association between OI scores and hippocampal volume in the patient (not the control) group. Similar changes with tests of executive function and memory were not found. Low OI scores on B-SIT were associated with conversion from aMCI to AD in patients. The reduced OI patient group was significantly faster on Rey complex figure copying than the fairly intact OI group. Conclusion The results from this pilot study suggest that the reduction in the size of hippocampus in connection with early AD is associated more with loss of OI ability rather than loss of memory, thus demonstrating that impaired OI is an early marker of medial temporal lobe degeneration. PMID:25154749

Assessment of indoor pollutants generated from bio and synthetic fuels in selected villages of Burdwan, West Bengal.

PubMed

Mondal, N K; Bhaumik, R; Das, C R; Aditya, P; Datta, J K; Banerjee, A; Das, K

2013-09-01

The objective of the present study was to access the pollutant generated from bio-fuels like bamboo sticks, cow dung, paddy straw, carbon dust cake, gobar gas, jute stick, and mustard stick and synthetic fuel like LPG during cooking in rural villages of Burdwan, West Bengal, India and its fluctuation in living room. The average SO2 released from the fuels was found in the following order: bamboo stick > cow dung > paddy straw > carbon cake > gobar gas > jute stick > LPG > mustard stick; NO2 emission was in the following order : mustard stick > carbon dust cake > paddy straw > cow dung cake > LPG, jute stick > gobar gas > bamboo stick > and SPM was obtained in the following sequence: cow dung cake > bamboo stick > carbon dust cake > gobar gas > LPG > mustard stick > paddy straw > jute stick, respectively. The highest living room to kitchen room (L/K) ratio of SO2, NO, and SPM was found in LPG, gobar gas, jute stick respectively in 2009 and followed by bamboo stick > paddy straw > jute stick > cow dung cake, respectively in 2010. Results of this study suggest that different fuels released different amount of air pollutants, but more extensive study is needed to confirm the relationship between fuels and released air pollutants.

The influence of testing apparatus stiffness on the source properties of laboratory stick-slip

NASA Astrophysics Data System (ADS)

Kilgore, B. D.; McGarr, A.; Beeler, N. M.; Lockner, D. A.

2016-12-01

Stick-slip experiments were performed to determine the influence of the testing apparatus stiffness on source properties, to develop methods to relate stick-slip to natural earthquakes, and to examine the hypothesis of McGarr [2012] that the product of unloading stiffness, k, and slip duration, T, is both scale-independent and approximately constant for both laboratory and natural earthquakes. A double-direct shear load frame was used with Sierra White Granite samples at 2 MPa normal stress, and a remote loading rate of 0.2 µm/s. The stiffness of the test apparatus was varied by more than an order of magnitude by inserting disk springs into the shear loading column adjacent to the granite samples. Servo-controlling slip at a point between the forcing ram and the shear force load cell, produced repeatable slip events. Slip and slip duration decrease as k increases, as they do for natural earthquakes. In contrast to earthquakes, stress drop and slip rate decrease with increasing k, and the product kT for these experiments is not constant, but decreases with k. These data, collected over a range of k, do not conform to McGarr's [2012] hypothesis. However, analysis of stick-slip studies from other testing apparatuses is consistent with McGarr's hypothesis; kT is scale-independent, similar to that of earthquakes, equal to the ratio of static stress drop to average slip velocity, and similar to the ratio of shear modulus to wavespeed of rock. These properties result from conducting experiments over a range of sample sizes, using rock samples with the same elastic properties as the Earth, and using testing machines whose stiffnesses decrease, and characteristic periods increase with scale. A consequence of our experiments and analysis is that extrapolation of lab scale earthquake source properties to the Earth is more difficult than previously thought, requiring an accounting for the properties of the testing machines and additional research beyond that reported here.

New non-stick expoxy-silicone water-based coatings part 1: Physical and surface properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garti, N.; Smith, J.

In search for tomorrow`s technology for water-based coating, Decora Manufacturing and The Hebrew University of Jerusalem, have initiated an intensive research program for designing, developing and manufacturing new coatings based on cross-linked, room temperature-cured silicone-expoxy resins. The new water-borne coatings have most exciting characteristics such as: non-stick properties, effective release, high lubricity, corrosion protection and abrasion resistance. The coatings are environmentally-friendly and easy to use. These coatings are ideal for marine, agricultural, industrial and maintenance applications. This paper brings quantitative measurements related to the dispersion technology (particle size, stability, shelf-life), to the non-stick properties (deicing, low surface energy, easy-release andmore » non-stick), lubricity, adhesion to substrates, viscosity, dynamic and static friction coefficients and environmental impact (low VOC, non-toxicity, low-leaching). The coating was tested in various industrial coating systems and was found to exhibit excellent non-stick and release properties. Special attention was given to Zebra Mussels, Quagga Mussels and other bacterial and algeal bioforms. The coating proved to be efficient as foul-release coating with very low biofouling adhesion. The low adhesion applied to many other substances in which foul-release means easy-clean and low-wear.« less

16 CFR 1507.10 - Rockets with sticks.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Rockets with sticks. 1507.10 Section 1507.10... FIREWORKS DEVICES § 1507.10 Rockets with sticks. Rockets with sticks (including skyrockets and bottle rockets) shall utilize a straight and rigid stick to provide a direct and stable flight. Such sticks shall...

16 CFR 1507.10 - Rockets with sticks.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Rockets with sticks. 1507.10 Section 1507.10... FIREWORKS DEVICES § 1507.10 Rockets with sticks. Rockets with sticks (including skyrockets and bottle rockets) shall utilize a straight and rigid stick to provide a direct and stable flight. Such sticks shall...

16 CFR 1507.10 - Rockets with sticks.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Rockets with sticks. 1507.10 Section 1507.10... FIREWORKS DEVICES § 1507.10 Rockets with sticks. Rockets with sticks (including skyrockets and bottle rockets) shall utilize a straight and rigid stick to provide a direct and stable flight. Such sticks shall...

16 CFR 1507.10 - Rockets with sticks.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Rockets with sticks. 1507.10 Section 1507.10... FIREWORKS DEVICES § 1507.10 Rockets with sticks. Rockets with sticks (including skyrockets and bottle rockets) shall utilize a straight and rigid stick to provide a direct and stable flight. Such sticks shall...

Elephants know when their bodies are obstacles to success in a novel transfer task

PubMed Central

Dale, Rachel; Plotnik, Joshua M.

2017-01-01

The capacity to recognise oneself as separate from other individuals and objects is difficult to investigate in non-human animals. The hallmark empirical assessment, the mirror self-recognition test, focuses on an animal’s ability to recognise itself in a mirror and success has thus far been demonstrated in only a small number of species with a keen interest in their own visual reflection. Adapting a recent study done with children, we designed a new body-awareness paradigm for testing an animal’s understanding of its place in its environment. In this task, Asian elephants (Elephas maximus) were required to step onto a mat and pick up a stick attached to it by rope, and then pass the stick forward to an experimenter. In order to do the latter, the elephants had to see their body as an obstacle to success and first remove their weight from the mat before attempting to transfer the stick. The elephants got off the mat in the test significantly more often than in controls, where getting off the mat was unnecessary. This task helps level the playing field for non-visual species tested on cognition tasks and may help better define the continuum on which body- and self-awareness lie. PMID:28402335

Oscillations in two-dimensional photon-echo signals of excitonic and vibronic systems: Stick-spectrum analysis and its computational verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Egorova, Dassia

2014-01-21

Stick-spectrum expressions for electronic two-dimensional (2D) photon-echo (PE) signal of a generic multi-level system are presented and employed to interrelate oscillations in individual peaks of 2D PE signal and the underlying properties (eigenstates and coherent dynamics) of excitonic or vibronic systems. When focusing on the identification of the origin of oscillations in the rephasing part of 2D PE it is found, in particular, that multiple frequencies in the evolution of the individual peaks do not necessarily directly reflect the underlying system dynamics. They may originate from the excited-state absorption contribution to the signal, or arise due to multi-level vibrational structuremore » of the electronic ground state, and represent a superposition of system frequencies, while the latter may evolve independently. The analytical stick-spectrum predictions are verified and illustrated by numerical calculations of 2D PE signals of an excitonic trimer and of a displaced harmonic oscillator with unequal vibrational frequencies in the two electronic states. The excitonic trimer is the smallest excitonic oligomer where excited-state absorption may represent a superposition of excited-state coherences and significantly influence the phase of the observed oscillations. The displaced oscillator is used to distinguish between the frequencies of the ground-state and of the excited-state manifolds, and to demonstrate how the location of a cross peak in 2D pattern of the PE signal “predetermines” its oscillatory behavior. Although the considered models are kept as simple as possible for clarity, the stick-spectrum analysis provides a solid general basis for interpretation of oscillatory signatures in electronic 2D PE signals of much more complex systems with multi-level character of the electronic states.« less

Factors affecting the sticking of insects on modified aircraft wings

NASA Technical Reports Server (NTRS)

Yi, O.; Chan, R.; Eiss, N. S.; Pingali, U.; Wightman, J. P.

1988-01-01

The adhesion of insects to aircraft wings is studied. Insects were collected in road tests in past studies and a large experimental error was introduced caused by the variability of insect flux. The presence of such errors has been detected by studying the insect distribution across an aluminum-strip covered half-cylinder mounted on the top of a car. After a nonuniform insect distribution (insect flux) was found from three road tests, a new arrangement of samples was developed. The feasibility of coating aircraft wing surfaces with polymers to reduce the number of insects sticking onto the surfaces was studied using fluorocarbon elastomers, styrene butadiene rubbers, and Teflon.

Fatigue effects upon sticking region and electromyography in a six-repetition maximum bench press.

PubMed

van den Tillaar, Roland; Saeterbakken, Atle Hole

2013-01-01

The aim of the study was to examine the sticking region and concomitant neuromuscular activation of the prime movers during six-repetition maximum (RM) bench pressing. We hypothesised that both peak velocities would decrease and that the electromyography (EMG) of the prime movers (deltoid, major pectoralis and triceps) would increase during the pre-sticking and sticking region during the six repetitions due to fatigue. Thirteen resistance-trained males (age 22.8 ± 2.2 years, stature 1.82 ± 0.06 m, body mass 83.4 ± 7.6 kg) performed 6-RM bench presses. Barbell kinematics and EMG activity of pectoralis major, deltoid anterior, and triceps brachii during the pre-, sticking and post-sticking region of each repetition in a 6-RM bench press were analysed. For both the sticking as the post-sticking region, the time increased significantly from the first to the sixth repetition. Vertical barbell height at the start of sticking region was lower, while the height at the end of the sticking region and post-sticking region did not change during the six repetitions. It was concluded that in 6-RM bench pressing performance, the sticking region is a poor mechanical force region due to the unchanged barbell height at the end of the sticking region. Furthermore, when fatigue occurs, the pectoralis and the deltoid muscles are responsible for surpassing the sticking region as indicated by their increased activity during the pre- and sticking region during the six-repetitions bench press.

Effects of stick design features on perceptions of characteristics of cigarettes.

PubMed

Borland, Ron; Savvas, Steven

2013-09-01

To examine the extent (if any) that cigarette stick dimension, tipping paper design and other decorative design/branding have on Australian smokers' perceptions of those cigarettes. An internet survey of 160 young Australian adult ever-smokers who were shown computer images of three sets of cigarette sticks--five sticks of different lengths and diameters (set A), five sticks with different tipping paper design (set B) and four sticks of different decorative design (set C). Branding was a between-subjects randomised condition for set C. For each set, respondents ranked sticks on most and least attractive, highest and lowest quality and strongest and weakest taste. Cigarette sticks were perceived as different on attractiveness, quality and strength of taste. Standard stick length/diameter was perceived as the most attractive and highest quality stick, with men more inclined to rate a slim stick as less attractive. A stick with a cork-patterned tipping paper and a gold band was seen as most attractive, of highest quality and strongest in taste compared to other tipping designs. Branded sticks were seen as more attractive, higher in quality and stronger tasting than non-branded designs, regardless of brand, although the effects were stronger for a prestige compared with a budget brand. Characteristics of the cigarette stick affect smokers' perceptions of the attributes of those cigarettes and thus are a potential means by which product differentiation can occur. A comprehensive policy to eliminate promotional aspects of cigarette design and packaging needs to include rules about stick design.

Shear bond strength of different retainer wires and bonding adhesives in consideration of the pretreatment process.

PubMed

Reicheneder, Claudia; Hofrichter, Bernd; Faltermeier, Andreas; Proff, Peter; Lippold, Carsten; Kirschneck, Christian

2014-11-28

We aimed to compare the shear bond strength (SBS) of three different retainer wires and three different bonding adhesives in consideration of the pretreatment process of enamel surface sandblasting. 400 extracted bovine incisors were divided into 10 groups of 20 paired specimens each. 10 specimens of each group were pretreated by enamel sandblasting. The retainer wires Bond-A-Braid™, GAC-Wildcat®-Twistflex and everStick®ORTHO were bonded to the teeth with the adhesives Transbond™-LR, Tetric-EvoFlow™ and Stick®FLOW and then debonded measuring the SBS. While sandblasting generally increased SBS for all tested combinations, the retainer wires bonded with Transbond™-LR showed the highest SBS both with and without prior sandblasting. Significantly lower SBS were found for Tetric-EvoFlow™ that were comparable to those for everStick®ORTHO. Pretreatment of enamel surfaces by sandblasting increased the SBS of all retainer-wires. Transbond™-LR showed the best results compared to Tetric-EvoFlow™ and everStick®ORTHO, while all combinations used provided sufficient bonding strengths for clinical use.

Characterization and Fate of Gun and Rocket Propellant Residues on Testing and Training Ranges

DTIC Science & Technology

2011-08-01

propellant sticks, is tied in three places with polyester and cotton thread ties. The bundle is then wrapped in lead foil (a de-coppering agent...sticks and the tying of the bundle in five places, again using polyester and cotton thread ties. The combustible case is manufactured mainly from...and brought back to DRDC to be weighed and extracted to measure the remaining 2,4-DNT. Most of what was collected was the remains of the cotton

Sniffin' Sticks and olfactory system imaging in patients with Kallmann syndrome.

PubMed

Ottaviano, Giancarlo; Cantone, Elena; D'Errico, Arianna; Salvalaggio, Alessandro; Citton, Valentina; Scarpa, Bruno; Favaro, Angela; Sinisi, Antonio Agostino; Liuzzi, Raffaele; Bonanni, Guglielmo; Di Salle, Francesco; Elefante, Andrea; Manara, Renzo; Staffieri, Alberto; Martini, Alessandro; Brunetti, Arturo

2015-09-01

The relationship between olfactory function, rhinencephalon and forebrain changes in Kallmann syndrome (KS) have not been adequately investigated. We evaluated a large cohort of male KS patients using Sniffin' Sticks and MRI in order to study olfactory bulb (OB) volume, olfactory sulcus (OS) depth, cortical thickness close to the OS, and olfactory phenotype. Olfaction was assessed administering Sniffin' Sticks®, in 38 KS patients and 17 controls (by means of Screening 12 test®). All subjects underwent magnetic resonance imaging (MRI) to study OB volume, sulcus depth, and cortical thickness. Compared to controls, KS patients showed smaller OB volume (p<0.0001), reduced sulcus depth (p<0.0001), and thicker cortex in the region close to the OS (p<0.0001). Anosmic KS patients had smaller OB than controls and hyposmic KS patients; there was no difference between hyposmic KS patients and controls. OB volume correlated with Sniffin' Sticks score (r = 0.64; p < 0.001), OS depth (p<0.0001) and, inversely, with cortical thickness changes (p<0.0001). Sniffin' Sticks showed an inverse correlation with cortical thickness (r = -0.5; p<0.0001) and a trend toward a statistically significant correlation with OS depth. The present study provides further evidence of the strict relationship between olfaction and OB volume. The strong correlation between OB volume and the overlying cortical changes highlights the key role of rhinencephalon in forebrain embryogenesis. © 2015 ARS-AAOA, LLC.

E-2633

NASA Image and Video Library

1956-10-12

A photo of the control stick used on the Iron Cross Attitude Simulator. Although it resembled today's desktop computer flight sticks, its operation was different. As with a standard control stick, moving it back and forth raised and lowered the nose resulting in changes in pitch. Moving the stick to the right or left raised or lowered the wing, resulted in changes in roll. This control stick had a third axis, not found in standard control sticks. Twisting the stick to the right or left caused the airplane's nose to move horizontally in the same direction, resulting in changes in yaw.

Are slide-hold-slide tests a good analogue for the seismic cycle?

NASA Astrophysics Data System (ADS)

van den Ende, Martijn; Niemeijer, André; Marketos, George; Spiers, Christopher

2017-04-01

Earthquakes are among the most disruptive of natural hazards known to man. Owing to their destructive potential and poor predictability, earthquakes and unstable frictional sliding in general receive considerable attention, both in experimental and in modelling studies. For reliable seismic hazard assessments, accurate predictions of the failure strength of seismogenic faults is paramount. To study the time-dependent restrengthening (or "healing") of faults in a laboratory setting, the slide-hold-slide (SHS) method is commonly employed as an analogue for the seismic cycle. Using this method, it is assumed that the rate of restrengthening as observed in SHS tests is similar to the rate of restrengthening of natural faults during the interseismic phase. However, the dynamic and kinematic boundary conditions of SHS tests are inherently different to those of a fault that is being tectonically loaded. As such, it can be questioned whether SHS tests (in which the interseismic period is characterised by stress relaxation) yield the same rate of restrengthening as would be expected from laboratory stick-slip or natural seismic cycles (characterised by a more complex stress history). This question could in principle be addressed experimentally by comparing the results from SHS tests with the stress drop and recurrence time of regular stick-slips. However, due to technical limitations, direct comparison between SHS and stick-slips is non-trivial, and uncertainties in extrapolating the laboratory results remain. To assess the validity of SHS tests as an analogue for the seismic cycle, we simulate laboratory SHS tests as well as stick-slips using the Discrete Element Method (DEM). DEM is a particle-based numerical technique that is suitable for modelling granular media, such as fault gouges. Its constitutive relations are linked to grain-scale micro-processes, and, in the work presented here, we incorporate pressure solution creep and frictional sliding. The simultaneous operation of these deformation mechanisms has been proposed as a basis for velocity-weakening behaviour (Niemeijer & Spiers, 2007), and allows for the generation of regular stick-slips in our DEM model. By varying the stiffness of the system, we can control the recurrence interval of slip events, and investigate the relation between stress build-up (or stress drop during the slip event) and recurrence time as a measure for the restrengthening rate. These results are subsequently compared with simulations that mimic the laboratory SHS procedure. We find that, for the assumed micro-mechanisms, there is a good agreement between the restrengthening rate observed in SHS- and in stick-slip simulations, suggesting that the SHS method is a good laboratory analogue for studying the interseismic period of the seismic cycle. Furthermore, we find that the rate of restrengthening observed in the SHS simulations is independent of the stiffness of the system, and therefore the amount of slip during relaxation, implying that the rate-and-state ageing law better describes interseismic restrengthening than does the slip law, as has previously been observed experimentally by Beeler et al. (1994). References: Beeler et al. (1994), GRL 21(18), doi:10.1029/94GL01599 Niemeijer & Spiers (2007), JGR 112, doi:10.1029/2007JB005008

Orientation with a Viking sun-compass, a shadow-stick, and two calcite sunstones under various weather conditions.

PubMed

Bernáth, Balázs; Blahó, Miklós; Egri, Adám; Barta, András; Kriska, György; Horváth, Gábor

2013-09-01

It is widely accepted that Vikings used sun-compasses to derive true directions from the cast shadow of a gnomon. It has been hypothesized that when a cast shadow was not formed, Viking navigators relied on crude skylight polarimetry with the aid of dichroic or birefringent crystals, called "sunstones." We demonstrate here that a simple tool, that we call "shadow-stick," could have allowed orientation by a sun-compass with satisfying accuracy when shadows were not formed, but the sun position could have reliably been estimated. In field tests, we performed orientation trials with a set composed of a sun-compass, two calcite sunstones, and a shadow-stick. We show here that such a set could have been an effective orientation tool for Vikings only when clear, blue patches of the sky were visible.

No place to hide: two pilot studies assessing the effectiveness of adding a health warning to the cigarette stick.

PubMed

Hassan, Louise M; Shiu, Edward

2015-03-01

To examine whether health warnings printed onto the cigarette stick would increase intentions to quit. Two experiments with smokers were conducted. The first study was conducted in Scotland on 88 adult (aged 18 or over) smokers recruited around two university campuses. The second study was conducted on 120 adult (aged 16 or over) smokers recruited around inner city cafes in Greece. Study 1 tested smokers' ratings of the attractiveness of cigarettes printed with either 'minutes of life lost' (minute condition) or 'toxic constituents' (toxic condition) against a control cigarette as well as the change in participants' pre-exposure and postexposure quitting intentions. Study 2 only assessed the effect of the minute condition on smokers' change in quitting intentions. Analysis of variance and paired-samples t tests were undertaken. Participants in Study 1 were shown a picture of the stimuli, with participants in Study 2 given the actual cigarette to hold. The analyses revealed increases in quitting intentions postexposure for the minute condition (mean paired difference=0.68, p<0.001) and the toxic condition (mean paired difference=0.23, p<0.05) in Study 1. Similar findings were found for the minute condition (mean paired difference=0.38, p<0.001) in Study 2. These results suggest that printing a public health warning on the cigarette stick may result in higher intentions to quit smoking. However, many other messages (eg, benefits of quitting, harmful effects of secondhand smoke) which can be printed on the cigarette stick have not been tested in the current studies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Changes in olfactory bulb volume following lateralized olfactory training.

PubMed

Negoias, S; Pietsch, K; Hummel, T

2017-08-01

Repeated exposure to odors modifies olfactory function. Consequently, "olfactory training" plays a significant role in hyposmia treatment. In addition, numerous studies show that the olfactory bulb (OB) volume changes in disorders associated with olfactory dysfunction. Aim of this study was to investigate whether and how olfactory bulb volume changes in relation to lateralized olfactory training in healthy people. Over a period of 4 months, 97 healthy participants (63 females and 34 males, mean age: 23.74 ± 4.16 years, age range: 19-43 years) performed olfactory training by exposing the same nostril twice a day to 4 odors (lemon, rose, eucalyptus and cloves) while closing the other nostril. Before and after olfactory training, magnetic resonance imaging (MRI) scans were performed to measure OB volume. Furthermore, participants underwent lateralized odor threshold and odor identification testing using the "Sniffin' Sticks" test battery.OB volume increased significantly after olfactory training (11.3 % and 13.1 % respectively) for both trained and untrained nostril. No significant effects of sex, duration and frequency of training or age of the subjects were seen. Interestingly, PEA odor thresholds worsened after training, while olfactory identification remained unchanged.These data show for the first time in humans that olfactory training may involve top-down process, which ultimately lead to a bilateral increase in olfactory bulb volume.

Pediatric and young adult exposure to chemiluminescent glow sticks.

PubMed

Hoffman, Robert J; Nelson, Lewis S; Hoffman, Robert S

2002-09-01

Although chemiluminescent plastic rods, commonly called "glow sticks" or "light sticks," are typically considered to be minimally toxic or nontoxic, published data about exposure to these products are scarce. To test our hypothesis that exposure to chemiluminescent products is unlikely to result in significant morbidity or mortality and to describe factors associated with exposure by reviewing reports to our urban poison control center of human exposure to chemiluminescent products. Pediatric and young adult exposure to chemiluminescent products reported between January 1, 2000, and April 1, 2001, to our poison control center were evaluated with regard to demographic group, type of product involved, circumstances of exposure, symptoms, and management. Reported routes of exposure (n = 118) included ingestion (n = 108), ocular (n = 9), and dermal exposure (n = 1). Only patients exposed to chemiluminescent fluid from a leaking container reported symptoms (n = 27). Symptoms were limited to transient irritation of the exposure site, and no systemic toxicity occurred. All adults (n = 4) inadvertently ruptured or swallowed intact light sticks while at a dance club or dance party. Most exposure and all adult exposure occurred on holidays or weekends. Most incidences of exposure to chemiluminescent products involve asymptomatic ingestion of fluid that leaks from glow sticks or ingestion of an intact glow stick. Symptoms occur after exposure to chemiluminescent fluid and consist of transient irritation at the site of exposure. The clustering of reported exposure on weekends and in dance clubs and parties coupled with a lack of occupational or workplace exposure suggest that recreational use is a major contributory factor. Exposure to chemiluminescent products infrequently resulted in symptoms and the symptoms reported were minor. Exposure to chemiluminescent products as described is unlikely to cause significant morbidity or mortality.

Short stick exercises for fall prevention among older adults: a cluster randomized trial.

PubMed

Yokoi, Katsushi; Yoshimasu, Kouichi; Takemura, Shigeki; Fukumoto, Jin; Kurasawa, Shigeki; Miyashita, Kazuhisa

2015-01-01

To investigate the effects of short stick exercise (SSEs) on fall prevention and improvement of physical function in older adults. A cluster randomized trial was conducted in five residential care facilities. The intervention group (n = 51) practiced SSEs for six months, followed by routine care for six more months. The control group (n = 54) received ordinary care for 12 months. The primary outcome measure was the number of fallers, taking into account the time to first fall using the Kaplan-Meier method. The secondary outcome measures were physical and mental functions. The number of fallers was significantly lower in the intervention group (n = 6) than in the control group (n = 16) during the 12 months. The adjusted hazard ratio for a first fall in the intervention group compared with the control group was 0.15 (CI, 0.03 to 0.74, p = 0.02). The fall-free period was significantly longer in the intervention group than in controls (mean ± SD, 10.1 ± 3.0 versus 9.0 ± 4.1 months, p = 0.027). The functional reach and sit and reach tests were significantly improved at three and six months. The SSEs appeared effective for fall prevention and improvement of physical function in older adults. Implications for Rehabilitation The newly developed short stick exercises appear an effective means of reducing falls among older adults in residential care facilities. The short stick exercises seem to have an immediate effect on improving physical functions. Effects gained by performing the short stick exercises, such as static balance, flexibility and agility may last for six months. The short stick exercises were found to be easy for older adults to practice continuously in residential care facilities.

Powder properties and compaction parameters that influence punch sticking propensity of pharmaceuticals.

PubMed

Paul, Shubhajit; Taylor, Lisa J; Murphy, Brendan; Krzyzaniak, Joseph F; Dawson, Neil; Mullarney, Matthew P; Meenan, Paul; Sun, Changquan Calvin

2017-04-15

Punch sticking is a frequently occurring problem that challenges successful tablet manufacturing. A mechanistic understanding of the punch sticking phenomenon facilitates the design of effective strategies to solve punch sticking problems of a drug. The first step in this effort is to identify process parameters and particle properties that can profoundly affect sticking performance. This work was aimed at elucidating the key material properties and compaction parameters that influence punch sticking by statistically analyzing punch sticking data of 24 chemically diverse compounds obtained using a set of tooling with removable upper punch tip. Partial least square (PLS) analysis of the data revealed that particle surface area and tablet tensile strength are the most significant factors attributed to punch sticking. Die-wall pressure, ejection force, and take-off force also correlate with sticking, but to a lesser extent. Copyright © 2017 Elsevier B.V. All rights reserved.

Olfactory impairment in first-episode schizophrenia: a case-control study, and sex dimorphism in the relationship between olfactory impairment and psychotic symptoms.

PubMed

Chen, Xiacan; Xu, Jiajun; Li, Bin; Guo, Wanjun; Zhang, Jun; Hu, Junmei

2018-06-18

A body of studies has focused on the olfactory impairment among people with schizophrenia. The effect of sex on this relationship has attracted the attention of researchers. These issues have not been studied much in Chinese schizophrenia patients. We conducted a case-control study of 110 first-episode antipsychotic medicine naïve schizophrenia patients aged 18-35 years and 110 controls, matched by age and sex. Odour threshold, discrimination and identification were assessed by the "Sniffin' Sticks" test. Psychotic symptoms were assessed by the Positive and Negative Syndrome Scale (PANSS). The odour threshold, discrimination and identification scores of patients with schizophrenia were significantly lower than those of the healthy control group. The difference in identification score had statistical significance between male and female patients with schizophrenia (t = - 2.45, P < 0.05). Controlling for confounding factor, in male schizophrenia participants, the negative subscale score was significantly and inversely correlated with the discrimination (γ = - 0.37, p < 0.008), identification (γ = - 0.45, p < 0.008) and TDI (γ = - 0.50, p < 0.008) scores; the general psychopathology subscale score was inversely and significantly correlated with the identification (γ = - 0.47, p < 0.008) and TDI (γ = - 0.41, p < 0.008) scores. For female schizophrenia patients, positive and general psychopathology subscale scores had a significant inverse correlation with the identification score (positive: γ = - 0.47, p < 0.008; general psychopathology: γ = - 0.42, p < 0.008). Controlling for confounder, negative symptoms were related to impaired odour discrimination and identification in male schizophrenia patients, while positive symptoms were correlated with impaired odour identification in female schizophrenia patients. This sex dimorphism could provide useful information for future studies aiming to finding biomarkers of schizophrenia.

16 CFR § 1507.10 - Rockets with sticks.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Rockets with sticks. § 1507.10 Section Â... REGULATIONS FIREWORKS DEVICES § 1507.10 Rockets with sticks. Rockets with sticks (including skyrockets and bottle rockets) shall utilize a straight and rigid stick to provide a direct and stable flight. Such...

Smart Sensor Systems for Aerospace Applications: From Sensor Development to Application Testing

NASA Technical Reports Server (NTRS)

Hunter, G. W.; Xu, J. C.; Dungan, L. K.; Ward, B. J.; Rowe, S.; Williams, J.; Makel, D. B.; Liu, C. C.; Chang, C. W.

2008-01-01

The application of Smart Sensor Systems for aerospace applications is a multidisciplinary process consisting of sensor element development, element integration into Smart Sensor hardware, and testing of the resulting sensor systems in application environments. This paper provides a cross-section of these activities for multiple aerospace applications illustrating the technology challenges involved. The development and application testing topics discussed are: 1) The broadening of sensitivity and operational range of silicon carbide (SiC) Schottky gas sensor elements; 2) Integration of fire detection sensor technology into a "Lick and Stick" Smart Sensor hardware platform for Crew Exploration Vehicle applications; 3) Extended testing for zirconia based oxygen sensors in the basic "Lick and Stick" platform for environmental monitoring applications. It is concluded that that both core sensor platform technology and a basic hardware platform can enhance the viability of implementing smart sensor systems in aerospace applications.

Comparison of subjective olfaction ratings in patients with and without olfactory disorders.

PubMed

Haxel, B R; Bertz-Duffy, S; Fruth, K; Letzel, S; Mann, W J; Muttray, A

2012-07-01

Olfactory dysfunction is common. The reliability of self-assessment tools for smell testing is still controversial. This study aimed to provide new data about the accuracy of olfactory self-assessment compared with a standardised smell test. Prospective, controlled, cohort study of patients with olfactory disorders and healthy controls. Ninety-six patients with a smell deficit and 71 controls were asked to rate their sense of smell on a visual analogue scale. Their olfactory abilities were also evaluated with the Sniffin' Sticks tests. The whole cohort showed a significant correlation between visual analogue scale smell scores and Sniffin' Sticks total scores. This correlation was also significant in the patient group, but not in the control group. These results were independent of olfactory deficit aetiology and subject age. Self-assessment of olfaction is only a reliable indicator in smell-impaired patients, not in healthy controls. For an accurate assessment of olfaction, reliable, standardised tests are needed.

The Association Between Olfaction and Depression: A Systematic Review.

PubMed

Kohli, Preeti; Soler, Zachary M; Nguyen, Shaun A; Muus, John S; Schlosser, Rodney J

2016-07-01

Previous studies on the relationship between olfaction and depression have revealed mixed results. In addition, few have focused on the reciprocity of this association. The aim of this study is to combine depression and olfactory data in two separate patient populations to further understand their association. A systematic literature review was conducted using 3 online databases to identify studies correlating olfaction and depression in patients presenting with either primary depression or primary olfactory dysfunction. For the depressed population, weighted means and standard deviations for the Sniffin' Sticks Test and the 40-item Smell Identification Test were combined using 10 studies. For the olfactory dysfunction population, weighted means of Beck's Depression Inventory were combined using 3 studies. Independent t-tests were used to compare differences between groups. Comparing primary depressed patients with controls, depressed patients showed decreased scores in olfactory threshold (6.31±1.38 vs. 6.78±0.88, P = 0.0005), discrimination (12.05±1.44 vs. 12.66±1.36, P = 0.0073), identification (12.57±0.74 vs. 12.98±0.90, P < 0.0001), and 40-Item Smell Identification Test (35.31±1.91 vs. 37.41±1.45, P < 0.0001). In patients with primary olfactory dysfunction, Beck's Depression Inventory scores were significantly different between patients classified as normosmics, hyposmics and anosmics (5.21±4.73 vs. 10.93±9.25 vs. 14.15±5.39, P ≤ 0.0274 for all 3 comparisons). In conclusion, patients with depression have reduced olfactory performance when compared with the healthy controls and conversely, patients with olfactory dysfunction, have symptoms of depression that worsen with severity of smell loss. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Test Anxiety? Try a Stick of Gum...

ERIC Educational Resources Information Center

Wilmore, Elaine L.

American schools face pressure to increase their students' test scores. Research reports have shown American students to be particularly stressed over test taking partially because of other outside interests in their lives that also take up time. This paper offers tips to help students relieve stress arising from the testing situation. Students…

Effect of video-game experience and position of flight stick controller on simulated-flight performance.

PubMed

Cho, Bo-Keun; Aghazadeh, Fereydoun; Al-Qaisi, Saif

2012-01-01

The purpose of this study was to determine the effects of video-game experience and flight-stick position on flying performance. The study divided participants into 2 groups; center- and side-stick groups, which were further divided into high and low level of video-game experience subgroups. The experiment consisted of 7 sessions of simulated flying, and in the last session, the flight stick controller was switched to the other position. Flight performance was measured in terms of the deviation of heading, altitude, and airspeed from their respective requirements. Participants with high experience in video games performed significantly better (p < .001) than the low-experienced group. Also, participants performed significantly better (p < .001) with the center-stick than the side-stick. When the side-stick controller was switched to the center-stick position, performance scores continued to increase (0.78 %). However, after switching from a center- to a side-stick controller, performance scores decreased (4.8%).

[Comparison of clinical effects of Co-Cr alloy cast post-core and everStick fiber post in restoration of labially or lingually inclined maxillary central incisor].

PubMed

Qian, Yu-Mei; Zhong, Qun; Chen, Shuang

2017-02-01

To compare the clinical effect of Co-Cr alloy cast post-core and everStick fiber post in restoration of maxillary central incisor with labial or lingual inclination, and provide theoretical basis for clinical application. Ninety-seven labially or lingually inclined maxillary central incisors were treated in our hospital from March 2012 to March 2014. The patients were randomly divided into group A (n=49) and group B (n=48), and received post -core and crown restoration. Patients in group A underwent Co-Cr alloy cast post and core restoration and patients in group B underwent everStick fiber post and core restoration. After two-year of follow-up, root fracture, post break, crown or post dislodgment and gingival marginal discoloration were recorded and analyzed using SPSS 19.0 software package. Chi-square test showed that the success rate of restoration was significantly different between 2 groups (P<0.05). The incidence of root fracture and gingival marginal discoloration of Co-Cr alloy cast post-core was higher than that of everStick fiber post, but there was no significant difference in the incidence of post break, crown or post dislodgment. EverStick fiber post is better than Co-Cr alloy cast post and core to prevent root fracture and gingival marginal discoloration. Its fracture pattern is repairable and favorable for preserving tooth.

Fractography of a bis-GMA resin.

PubMed

Davis, D M; Waters, N E

1989-07-01

The fracture behavior of a bis-GMA resin was studied by means of the double-torsion test. The fracture parameter measured was the stress-intensity factor. Fracture occurred in either a stick-slip (unstable) or continuous (stable) manner, depending upon the test conditions. When stick-slip propagation occurred, the fracture surfaces showed characteristic crack-arrest lines. The fracture surfaces were examined by use of a reflected-light optical microscope. The stress-intensity factor for crack initiation was found to be related to the size of the crack-arrest line which, in turn, could be related to the Dugdale model for plastic zone size. The evidence supported the concept that the behavior of the crack during propagation was controlled by the amount of plastic deformation occurring at the crack tip.

Modeling stick-slip-separation dynamics in a bimodal standing wave ultrasonic motor

NASA Astrophysics Data System (ADS)

Li, Xiang; Yao, Zhiyuan; Lv, Qibao; Liu, Zhen

2016-11-01

Ultrasonic motor (USM) is an electromechanical coupling system with ultrasonic vibration, which is driven by the frictional contact force between the stator (vibrating body) and the rotor/slider (driven body). Stick-slip motion can occur at the contact interface when USM is operating, which may affect the performance of the motor. This paper develops a physically-based model to investigate the complex stick-slip-separation dynamics in a bimodal standing wave ultrasonic motor. The model includes both friction nonlinearity and intermittent separation nonlinearity of the system. Utilizing Hamilton's principle and assumed mode method, the dynamic equations of the stator are deduced. Based on the dynamics of the stator and the slider, sticking force during the stick phase is derived, which is used to examine the stick-to-slip transition. Furthermore, the stick-slip-separation kinematics is analyzed by establishing analytical criteria that predict the transition between stick, slip and separation of the interface. Stick-slip-separation motion is observed in the resulting model, and numerical simulations are performed to study the influence of parameters on the range of possible motions. Results show that stick-slip motion can occur with greater preload and smaller voltage amplitude. Furthermore, a dimensionless parameter is proposed to predict the occurrence of stick-slip versus slip-separation motions, and its role in designing ultrasonic motors is discussed. It is shown that slip-separation motion is favorable for the slider velocity.

Stick-weaving: Innovative Behavior in Tamarins

PubMed Central

Snowdon, Charles T.; Roskos, Thomas R.

2017-01-01

Some captive cotton-top tamarins spontaneously weave sticks in the mesh of their enclosures so that the stick is lodged between two mesh openings. Sticks are broken from natural branches placed in the enclosures and often modified by biting them in the center before weaving through the mesh. To investigate this further we systematically surveyed all animals in our colony and found that all successful stick weaving tamarins were descendants from only two of the 16 breeding groups contributing to the colony membership at the time of surveying or were the mates of these descendants, suggesting stick-weaving is a socially learned behavior. Successful stick-weavers were presented with pipe cleaners, soda straws and wooden dowels to see if they would generalize stick-weaving to novel objects. Seven of 10 animals successfully wove with straws or pipe cleaners showing that they could generalize the behavior to objects that were physically different but had the same affordances as the sticks. Data from a father-daughter pair suggest a form of coaching. Innovative behavior is needed for the emergence of culture with subsequent social transmission. Although innovative behavior in primates is mainly associated with foraging and is more likely to occur among males, stick-weaving has no obvious reward and appeared equally in both sexes. Stick-weaving behavior and its probable social transmission across generations suggest the possibility of cultural traditions emerging in this species. PMID:28277719

The "sticking period" in a maximum bench press.

PubMed

van den Tillaar, Roland; Ettema, Gertjan

2010-03-01

The purpose of this study was to examine muscle activity and three-dimensional kinematics in the ascending phase of a successful one-repetition maximum attempt in bench press for 12 recreational weight-training athletes, with special attention to the sticking period. The sticking period was defined as the first period of deceleration of the upward movement (i.e. from the highest barbell velocity until the first local lowest barbell velocity). All participants showed a sticking period during the upward movement that started about 0.2 s after the initial upward movement, and lasted about 0.9 s. Electromyography revealed that the muscle activity of the prime movers changed significantly from the pre-sticking to the sticking and post-sticking periods. A possible mechanism for the existence of the sticking period is the diminishing potentiation of the contractile elements during the upward movement together with the limited activity of the pectoral and deltoid muscles during this period.

[Observation on therapeutic effect of moxibustion with thunder-fire herbal moxa stick on xerophthalmia of oligodacrya].

PubMed

Chen, Lu-Quan

2008-08-01

To observe clinical therapeutic effect of moxibustion with thunder-fire herbal moxa stick on xerophthalmia of oligodacrya. Seventy cases were randomly divided into an observation group and a control group. The observation group (n=36) were treated with moxibustion with thunder-fire herbal moxa stick at Cuanzhu (BL 2), Yuyao (EX-HN 4), Tongziliao (GB 1), Taiyang (EX-HN 5), Sibai (ST 2), Jingming (BL 1), etc. and massage of acupoints and lacrimal gland around the eye. The control group (n=34) were treated with local dripping Leiran Diyanye. Changes of the main symptoms, tears secretion test, lacrimal membrane breaking time and corneal fluorescent staining before and after treatment were observed in the two groups. After treatment, sensation of dryness and foreign body sensation in the eye, asthenopia and gross symptoms significantly improved (P<0.01) in the two groups, and the observation group in the improvement of the sensation of dryness and foreign body sensation in the eye and the gross symptoms was better than the control group (P<0.05); tears secretion test significantly improved and was better in the observation group than that in the control group (P<0.05); lacrimal membrane breaking time and corneal fluorescent staining were improved in the two groups (P<0.05), and the improvement of lacrimal membrane breaking time in the observation group was more obvious than that in the control group (P<0.05). Moxibustion with thunder-fire herbal moxa stick has good therapeutic effect on xerophthalmia of oligodacrya.

Modeling of combustion processes of stick propellants via combined Eulerian-Lagrangian approach

NASA Technical Reports Server (NTRS)

Kuo, K. K.; Hsieh, K. C.; Athavale, M. M.

1988-01-01

This research is motivated by the improved ballistic performance of large-caliber guns using stick propellant charges. A comprehensive theoretical model for predicting the flame spreading, combustion, and grain deformation phenomena of long, unslotted stick propellants is presented. The formulation is based upon a combined Eulerian-Lagrangian approach to simulate special characteristics of the two phase combustion process in a cartridge loaded with a bundle of sticks. The model considers five separate regions consisting of the internal perforation, the solid phase, the external interstitial gas phase, and two lumped parameter regions at either end of the stick bundle. For the external gas phase region, a set of transient one-dimensional fluid-dynamic equations using the Eulerian approach is obtained; governing equations for the stick propellants are formulated using the Lagrangian approach. The motion of a representative stick is derived by considering the forces acting on the entire propellant stick. The instantaneous temperature and stress fields in the stick propellant are modeled by considering the transient axisymmetric heat conduction equation and dynamic structural analysis.

Chemosensory interaction: acquired olfactory impairment is associated with decreased taste function.

PubMed

Landis, Basile N; Scheibe, Mandy; Weber, Cornelia; Berger, Robert; Brämerson, Annika; Bende, Mats; Nordin, Steven; Hummel, Thomas

2010-08-01

Olfaction, taste and trigeminal function are three distinct modalities. However, in daily life they are often activated concomitantly. In health and disease, it has been shown that in two of these senses, the trigeminal and olfactory senses, modification of one sense leads to changes in the other sense and vice versa. The objective of the study was to investigate whether and (if so) how, the third modality, taste, is influenced by olfactory impairment. We tested 210 subjects with normal (n = 107) or impaired (n = 103) olfactory function for their taste identification capacities. Validated tests were used for olfactory and gustatory testing (Sniffin' Sticks, Taste Strips). In an additional experiment, healthy volunteers underwent reversible olfactory cleft obstruction to investigate short-time changes of gustatory function after olfactory alteration. Mean gustatory identification (taste strip score) for the subjects with impaired olfaction was 19.4 +/- 0.6 points and 22.9 +/- 0.5 points for those with normal olfactory function (t = 4.6, p < 0.001). The frequencies of both, smell and taste impairments interacted significantly (Chi(2), F = 16.4, p < 0.001), and olfactory and gustatory function correlated (r (210) = 0.30, p < 0.001). Neither age nor olfactory impairment cause effects interfered with this olfactory-gustatory interaction. In contrast, after short-lasting induced olfactory decrease, gustatory function remained unchanged. The present study suggests that longstanding impaired olfactory function is associated with decreased gustatory function. These findings seem to extend previously described mutual chemosensory interactions also to smell and taste. It further raises the question whether chemical senses in general decrease mutually after acquired damage.

Reference values of olfactory function for Mexico City inhabitants.

PubMed

Guarneros, Marco; Hudson, Robyn; López-Palacios, Martha; Drucker-Colín, René

2015-01-01

Olfactory testing is useful in the differential diagnosis of age-related pathologies. To provide baseline reference values for clinical use in Mexico City we investigated the relation between olfactory capabilities and the principal population parameters of age, sex, and smoking habits in a large sample of healthy inhabitants. We applied the internationally recognized and commercially available Sniffin' Sticks test battery to 916 men and women from across the adult life span. The Sniffin' Sticks test evaluates three key aspects of olfactory function: 1) ability to detect an odor, 2) to discriminate between odors, and 3) to identify odors. We found a significant decline in olfactory function from the 5th decade of age, and that detection threshold was the most sensitive measure of this. We did not find a significant difference between men and women or between smokers and non-smokers. In confirmation of our previous studies of the negative effect of air pollution on olfactory function, Mexico City inhabitants had poorer overall performance than corresponding subjects previously tested in the neighboring but less polluted Mexican state of Tlaxcala. Although we basically confirm findings on general demographic patterns of olfactory performance from other countries, we also demonstrate the need to take into account local cultural, environmental and demographic factors in the clinical evaluation of olfactory performance of Mexico City inhabitants. The Sniffin' Sticks test battery, with some adjustment of stimuli to correspond to Mexican culture, provides an easily administered means of assessing olfactory health. Copyright © 2015 IMSS. Published by Elsevier Inc. All rights reserved.

A new paradigm for human stick balancing: a suspended not an inverted pendulum.

PubMed

Lee, Kwee-Yum; O'Dwyer, Nicholas; Halaki, Mark; Smith, Richard

2012-09-01

We studied 14 skilled subjects balancing a stick (a television antenna, 52 cm, 34 g) on their middle fingertip. Comprehensive three-dimensional analyses revealed that the movement of the finger was 1.75 times that of the stick tip, such that the balanced stick behaved more like a normal noninverted pendulum than the inverted pendulum common to engineering models for stick balancing using motors. The average relation between the torque applied to the stick and its angle of deviation from the vertical was highly linear, consistent with simple harmonic motion. We observed clearly greater rotational movement of the stick in the anteroposterior plane than the mediolateral plane. Despite this magnitude difference, the duration of stick oscillatory cycles was very similar in both planes, again consistent with simple harmonic motion. The control parameter in balancing was the ratio of active torque applied to the stick relative to gravitational torque. It determined both the pivot point and oscillatory cycle period of the pendulum. The pivot point was located at the radius of gyration (about the centre of mass) of the stick from its centre of mass, showing that the subjects attuned to the gravitational dynamics and mass distribution of the stick. Hence, the key to controlling instability here was mastery of the physics of the unstable object. The radius of gyration may--similar to centre of mass--contribute to the kinesthesis of rotating limb segments and control of their gravitational dynamics.

Accidental needle sticks, the Occupational Safety and Health Administration, and the fallacy of public policy.

PubMed

Wolf, Bruce L; Marks, Albert; Fahrenholz, John M

2006-07-01

Current Occupational Safety and Health Administration (OSHA) guidelines mandate the use of safety needles when allergy injections are given. Safety needles for intradermal testing remain optional. Whether safety needles reduce the number of accidental needle sticks (ANSs) in the outpatient setting has yet to be proven. To determine the rate of ANSs with new (safety) needles vs old needles used in allergy immunotherapy and intradermal testing. Allergy practices from 22 states were surveyed by e-mail. Seventy practices (28%) responded to the survey. Twice as many ANSs occurred in practices giving immunotherapy when using new needles vs old needles (P < .01). The rate of ANSs was roughly the same for intradermal testing with new needles vs old needles. These findings further question whether OSHA's guidelines for safety needle use in outpatient practice need revision and if allergy practices might be excluded from the requirement to use safety needles.

Weathering effects on fuel moisture sticks: corrections and recommendations.

Treesearch

Donald A. Haines; John S. Frost

1978-01-01

Describes response to weathering of 100-gram (1/2-inch) fuel moisture sticks over 6-month fire season in the Northeast. Presents a chart for correcting weathered-stick values and gives replacement recommendations for those sticks used in the National Fire Danger Rating System.

Numerical simulation of temperature at drilling micro-hole on moving CO2 laser irradiated sticking plaster

NASA Astrophysics Data System (ADS)

Rao, Zhiming; He, Zhifang; Du, Jianqiang; Zhang, Xinyou; Ai, Guoping; Zhang, Chunqiang; Wu, Tao

2012-03-01

This paper applied numerical simulation of temperature by using finite element analysis software Ansys to study a model of drilling on sticking plaster. The continuous CO2 laser doing uniform linear motion and doing uniform circular motion irradiated sticking plaster to vaporize. The sticking plaster material was chosen as the thermal conductivity, the heat capacity and the density. For temperatures above 450 °C, sticking plaster would be vaporized. Based on the mathematical model of heat transfer, the process of drilling sticking plaster by laser beams could be simulated by Ansys. The simulation results showed the distribution of the temperature at the surface of the sticking plaster with the time of vaporizing at CO2 laser to do uniform linear motion and to do uniform circular motion. The temperature of sticking plaster CO2 laser to do uniform linear motion was higher than CO2 laser to do uniform circular motion in the same condition.

Assembling large genomes: analysis of the stick insect (Clitarchus hookeri) genome reveals a high repeat content and sex-biased genes associated with reproduction.

PubMed

Wu, Chen; Twort, Victoria G; Crowhurst, Ross N; Newcomb, Richard D; Buckley, Thomas R

2017-11-16

Stick insects (Phasmatodea) have a high incidence of parthenogenesis and other alternative reproductive strategies, yet the genetic basis of reproduction is poorly understood. Phasmatodea includes nearly 3000 species, yet only the genome of Timema cristinae has been published to date. Clitarchus hookeri is a geographical parthenogenetic stick insect distributed across New Zealand. Sexual reproduction dominates in northern habitats but is replaced by parthenogenesis in the south. Here, we present a de novo genome assembly of a female C. hookeri and use it to detect candidate genes associated with gamete production and development in females and males. We also explore the factors underlying large genome size in stick insects. The C. hookeri genome assembly was 4.2 Gb, similar to the flow cytometry estimate, making it the second largest insect genome sequenced and assembled to date. Like the large genome of Locusta migratoria, the genome of C. hookeri is also highly repetitive and the predicted gene models are much longer than those from most other sequenced insect genomes, largely due to longer introns. Miniature inverted repeat transposable elements (MITEs), absent in the much smaller T. cristinae genome, is the most abundant repeat type in the C. hookeri genome assembly. Mapping RNA-Seq reads from female and male gonadal transcriptomes onto the genome assembly resulted in the identification of 39,940 gene loci, 15.8% and 37.6% of which showed female-biased and male-biased expression, respectively. The genes that were over-expressed in females were mostly associated with molecular transportation, developmental process, oocyte growth and reproductive process; whereas, the male-biased genes were enriched in rhythmic process, molecular transducer activity and synapse. Several genes involved in the juvenile hormone synthesis pathway were also identified. The evolution of large insect genomes such as L. migratoria and C. hookeri genomes is most likely due to the accumulation of repetitive regions and intron elongation. MITEs contributed significantly to the growth of C. hookeri genome size yet are surprisingly absent from the T. cristinae genome. Sex-biased genes identified from gonadal tissues, including genes involved in juvenile hormone synthesis, provide interesting candidates for the further study of flexible reproduction in stick insects.

Popsicle-Stick Cobra Wave

NASA Astrophysics Data System (ADS)

Boucher, Jean-Philippe; Clanet, Christophe; Quéré, David; Chevy, Frédéric

2017-08-01

The cobra wave is a popular physical phenomenon arising from the explosion of a metastable grillage made of popsicle sticks. The sticks are expelled from the mesh by releasing the elastic energy stored during the weaving of the structure. Here we analyze both experimentally and theoretically the propagation of the wave front depending on the properties of the sticks and the pattern of the mesh. We show that its velocity and its shape are directly related to the recoil imparted to the structure by the expelled sticks. Finally, we show that the cobra wave can only exist for a narrow range of parameters constrained by gravity and rupture of the sticks.

The Impact of Frictional Healing on Stick-Slip Recurrence Interval and Stress Drop: Implications for Earthquake Scaling

NASA Astrophysics Data System (ADS)

Im, Kyungjae; Elsworth, Derek; Marone, Chris; Leeman, John

2017-12-01

Interseismic frictional healing is an essential process in the seismic cycle. Observations of both natural and laboratory earthquakes demonstrate that the magnitude of stress drop scales with the logarithm of recurrence time, which is a cornerstone of the rate and state friction (RSF) laws. However, the origin of this log linear behavior and short time "cutoff" for small recurrence intervals remains poorly understood. Here we use RSF laws to demonstrate that the back-projected time of null-healing intrinsically scales with the initial frictional state θi. We explore this behavior and its implications for (1) the short-term cutoff time of frictional healing and (2) the connection between healing rates derived from stick-slip sliding versus slide-hold-slide tests. We use a novel, continuous solution of RSF for a one-dimensional spring-slider system with inertia. The numerical solution continuously traces frictional state evolution (and healing) and shows that stick-slip cutoff time also scales with frictional state at the conclusion of the dynamic slip process θi (=Dc/Vpeak). This numerical investigation on the origins of stick-slip response is verified by comparing laboratory data for a range of peak slip velocities. Slower slip motions yield lesser magnitude of friction drop at a given time due to higher frictional state at the end of each slip event. Our results provide insight on the origin of log linear stick-slip evolution and suggest an approach to estimating the critical slip distance on faults that exhibit gradual accelerations, such as for slow earthquakes.

Determination of histamine in milkfish stick implicated in food-borne poisoning.

PubMed

Lee, Yi-Chen; Kung, Hsien-Feng; Wu, Chien-Hui; Hsu, Hui-Mei; Chen, Hwi-Chang; Huang, Tzou-Chi; Tsai, Yung-Hsiang

2016-01-01

An incident of food-borne poisoning causing illness in 37 victims due to ingestion of fried fish sticks occurred in September 2014, in Tainan city, southern Taiwan. Leftovers of the victims' fried fish sticks and 16 other raw fish stick samples from retail stores were collected and tested to determine the occurrence of histamine and histamine-forming bacteria. Two suspected fried fish samples contained 86.6 mg/100 g and 235.0 mg/100 g histamine; levels that are greater than the potential hazard action level (50 mg/100 g) in most illness cases. Given the allergy-like symptoms of the victims and the high histamine content in the suspected fried fish samples, this food-borne poisoning was strongly suspected to be caused by histamine intoxication. Moreover, the fish species of suspected samples was identified as milkfish (Chanos chanos), using polymerase chain reaction direct sequence analysis. In addition, four of the 16 commercial raw milkfish stick samples (25%) had histamine levels greater than the US Food & Drug Administration guideline of 5.0 mg/100 g for scombroid fish and/or products. Ten histamine-producing bacterial strains, capable of producing 373-1261 ppm of histamine in trypticase soy broth supplemented with 1.0% L-histidine, were identified as Enterobacter aerogenes (4 strains), Enterobacter cloacae (1 strain), Morganella morganii (2 strains), Serratia marcescens (1 strain), Hafnia alvei (1 strain), and Raoultella orithinolytica (1 strain), by 16S ribosomal DNA sequencing with polymerase chain reaction amplification. Copyright © 2015. Published by Elsevier B.V.

Arterial stick

MedlinePlus

... venous blood) mainly in its content of dissolved gases . Testing arterial blood shows the makeup of the ... arteries. Blood samples are mainly taken to measure gases in the arteries. Abnormal results may point to ...

Serrated kiln sticks and top load substantially reduce warp in southern pine studs dried at 240°F

Treesearch

Peter Koch

1974-01-01

Sharply toothed aluminum kiln sticks pressed into 2 by 4's cut from veneer cores, with a clamping force of 50 to 200 pounds per stick-pair per stud, significantly reduced warp from that observed in matched studs stacked on smooth sticks with a top load of 10 pounds per stick-pair per stud. When dried in 24 hours to an average MC of 8.1 percent (standard deviation...

Serrated kiln sticks and top load substantially reduce warp in southern pine studs dried at 240°F

Treesearch

P. Koch

1974-01-01

Sharply toothed luminum kiln sticks pressed into 2 by 4's cut from veneer cores, willi a clamping force of 50 to 200 pounds per stick-pair per stud, significantly reduced warp from that observed in matched studs stacked on smooth sticks with a top load of 10 pounds per stick-pair per stud. When dried in 24 hours to an average MC of 8.1 percent (standard deviation...

49 CFR Appendix D to Part 173 - Test Methods for Dynamite (Explosive, Blasting, Type A)

Code of Federal Regulations, 2010 CFR

2010-10-01

..., Type A) D Appendix D to Part 173 Transportation Other Regulations Relating to Transportation PIPELINE... REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Pt. 173, App. D Appendix D to Part 173—Test Methods for Dynamite (Explosive, Blasting, Type A) 1. Test method D-1—Leakage Test A wooden stick...

Sweet liking in patients with Parkinson's disease.

PubMed

Sienkiewicz-Jarosz, Halina; Scinska, Anna; Swiecicki, Lukasz; Lipczynska-Lojkowska, Wanda; Kuran, Wlodzimierz; Ryglewicz, Danuta; Kolaczkowski, Marcin; Samochowiec, Jerzy; Bienkowski, Przemyslaw

2013-06-15

Pleasant tastes and odors are considered phylogenetically old natural rewards and their hedonic evaluation is regarded as a good indicator of the reward system function. The primary aim of the present study was to compare pleasantness ratings of sucrose solutions (1-30%, w/w) and sweet liking/disliking status in 20 patients with Parkinson's disease (PD) and in 20 age-matched healthy controls. In addition, basic sensory aspects of gustatory (intensity ratings, electrogustometric thresholds) and olfactory function (identification abilities in the Sniffin' Stick test) were assessed in both groups. The number of odors rated as pleasant, unpleasant, and neutral was also compared. As expected, the PD patients showed a significant impairment in olfactory identification abilities. There were no differences between the PD patients and controls in electrogustometric thresholds. Rated intensity of higher sucrose concentrations did not differ between the groups. The PD patients tended to rate water taste as more intense in comparison with the controls. Pleasantness ratings of sucrose solutions, the proportion of subjects rating 30% sucrose as the most pleasant (sweet likers), and the number of odors rated as pleasant did not differ between the study groups. The present results suggest that PD does not lead to any obvious alterations in pleasantness ratings of chemosensory stimuli. The study requires replication in larger samples. Copyright © 2013. Published by Elsevier B.V.

Unit: Sticking Together, First Trial Materials, Inspection Set.

ERIC Educational Resources Information Center

Australian Science Education Project, Toorak, Victoria.

These materials, including teacher's guide, student test booklet and laboratory guide, student workbook, test booklet, and a booklet explaining the answers to the questions in the test booklet, are first trial versions of a unit that will form part of the Australian Science Education Project instructional materials for grades seven through ten.…

Fracture strength of artificially aged 3-unit adhesive fixed partial dentures made of fiber-reinforced composites and ceramics: an in vitro study.

PubMed

Kolbeck, Carola; Rosentritt, Martin; Handel, Gerhard

2006-10-01

The aim of this in vitro study was to examine the fracture strength of metal-free 3-unit adhesive fixed partial dentures (AFPDs) bonded to mandibular incisors. Extracted human incisors were positioned in pairs in polymethyl methacrylate resin simulating a clinical anterior situation. Their lingual sides were prepared for adhesive retainers with surfaces and finishing lines in enamel. Eight 3-unit AFPDs were made on master casts per material system: Connect/belleGlass (Girrbach), StickNet (StickTech)/Sinfony (3M Espe), and Empress 2 (Ivoclar Vivadent). The dentures were bonded adhesively using the dual-curing system ED Primer/ Panavia F (Kuraray Europe) and aged by thermocycling (6,000 x 5 degrees C/55 degrees C H2O; 2 minutes each cycle) and mechanical loading (1.2 x 10(6) x 20 N with 1.66 Hz) in an artificial oral environment representing a wearing period of 5 years. The fracture strength was determined in a universal testing machine (UTM 1446, Zwick) at a speed of 1 mm/min, applying the load buccoincisally on the pontics. The different forms of failure were described optically. Medians (25th/75th percentiles) of the fracture results were calculated. Statistical analysis was performed using Mann-Whitney U and Kruskal-Wallis tests (P < or = .05). Five StickNet/Sinfony AFPDs and 7 Empress 2 restorations failed in the artificial oral environment. The remaining Empress 2 dentures showed the highest medians of fracture forces (339 [200/506] N) compared to Connect/belleGlass (257 [242/310] N) and StickNet/Sinfony (256 [204/347] N). Statistical comparisons showed no significant differences. Only Connect/belleGlass and Empress 2 showed sufficient resistance against mastication

Gray Wolf (Canis lupus) death by stick impalement

USGS Publications Warehouse

Barber-Meyer, Shannon; Schmidt, Lori; Mech, L. David

2017-01-01

Although Canis lupus L. (Gray Wolf) individuals are sometimes impaled by sticks, we could find no documentation of natural impalement by sticks as a cause of death for wild Wolves. Here we report on a wild Gray Wolf from northeastern Minnesota that died due to stick puncture of its thorax and abdomen.

Evaluation of Two Unique Side Stick Controllers in a Fixed-Base Flight Simulator

NASA Technical Reports Server (NTRS)

Mayer, Jann; Cox, Timothy H.

2003-01-01

A handling qualities analysis has been performed on two unique side stick controllers in a fixed-base F-18 flight simulator. Each stick, which uses a larger range of motion than is common for similar controllers, has a moving elbow cup that accommodates movement of the entire arm for control. The sticks are compared to the standard center stick in several typical fighter aircraft tasks. Several trends are visible in the time histories, pilot ratings, and pilot comments. The aggressive pilots preferred the center stick, because the side sticks are underdamped, causing overshoots and oscillations when large motions are executed. The less aggressive pilots preferred the side sticks, because of the smooth motion and low breakout forces. The aggressive pilots collectively gave the worst ratings, probably because of increased sensitivity of the simulator (compared to the actual F-18 aircraft), which can cause pilot-induced oscillations when aggressive inputs are made. Overall, the elbow cup is not a positive feature, because using the entire arm for control inhibits precision. Pilots had difficulty measuring their performance, particularly during the offset landing task, and tended to overestimate.

Numerical and flight simulator test of the flight deterioration concept

NASA Technical Reports Server (NTRS)

Mccarthy, J.; Norviel, V.

1982-01-01

Manned flight simulator response to theoretical wind shear profiles was studied in an effort to calibrate fixed-stick and pilot-in-the-loop numerical models of jet transport aircraft on approach to landing. Results of the study indicate that both fixed-stick and pilot-in-the-loop models overpredict the deleterious effects of aircraft approaches when compared to pilot performance in the manned simulator. Although the pilot-in-the-loop model does a better job than does the fixed-stick model, the study suggests that the pilot-in-the-loop model is suitable for use in meteorological predictions of adverse low-level wind shear along approach and departure courses to identify situations in which pilots may find difficulty. The model should not be used to predict the success or failure of a specific aircraft. It is suggested that the pilot model be used as part of a ground-based Doppler radar low-level wind shear detection and warning system.

Generic Airplane Model Concept and Four Specific Models Developed for Use in Piloted Simulation Studies

NASA Technical Reports Server (NTRS)

Hoffler, Keith D.; Fears, Scott P.; Carzoo, Susan W.

1997-01-01

A generic airplane model concept was developed to allow configurations with various agility, performance, handling qualities, and pilot vehicle interface to be generated rapidly for piloted simulation studies. The simple concept allows stick shaping and various stick command types or modes to drive an airplane with both linear and nonlinear components. Output from the stick shaping goes to linear models or a series of linear models that can represent an entire flight envelope. The generic model also has provisions for control power limitations, a nonlinear feature. Therefore, departures from controlled flight are possible. Note that only loss of control is modeled, the generic airplane does not accurately model post departure phenomenon. The model concept is presented herein, along with four example airplanes. Agility was varied across the four example airplanes without altering specific excess energy or significantly altering handling qualities. A new feedback scheme to provide angle-of-attack cueing to the pilot, while using a pitch rate command system, was implemented and tested.

Numerical analysis for the stick-slip vibration of a transversely moving beam in contact with a frictional wall

NASA Astrophysics Data System (ADS)

Won, Hong-In; Chung, Jintai

2018-04-01

This paper presents a numerical analysis for the stick-slip vibration of a transversely moving beam, considering both stick-slip transition and friction force discontinuity. The dynamic state of the beam was separated into the stick state and the slip state, and boundary conditions were defined for both. By applying the finite element method, two matrix-vector equations were derived: one for stick state and the other for slip state. However, the equations have different degrees of freedom depending on whether the end of a beam sticks or slips, so we encountered difficulties in time integration. To overcome the difficulties, we proposed a new numerical technique to alternatively use the matrix-vector equations with different matrix sizes. In addition, to eliminate spurious high-frequency responses, we applied the generalized-α time integration method with appropriate value of high-frequency numerical dissipation. Finally, the dynamic responses of stick-slip vibration were analyzed in time and frequency domains: the dynamic behavior of the beam was explained to facilitate understanding of the stick-slip motion, and frequency characteristics of the stick-slip vibration were investigated in relation to the natural frequencies of the beam. The effects of the axial load and the moving speed upon the dynamic response were also examined.

Stick-slip friction and wear of articular joints

PubMed Central

Lee, Dong Woog; Banquy, Xavier; Israelachvili, Jacob N.

2013-01-01

Stick-slip friction was observed in articular cartilage under certain loading and sliding conditions and systematically studied. Using the Surface Forces Apparatus, we show that stick-slip friction can induce permanent morphological changes (a change in the roughness indicative of wear/damage) in cartilage surfaces, even under mild loading and sliding conditions. The different load and speed regimes can be represented by friction maps—separating regimes of smooth and stick-slip sliding; damage generally occurs within the stick-slip regimes. Prolonged exposure of cartilage surfaces to stick-slip sliding resulted in a significant increase of surface roughness, indicative of severe morphological changes of the cartilage superficial zone. To further investigate the factors that are conducive to stick-slip and wear, we selectively digested essential components of cartilage: type II collagen, hyaluronic acid (HA), and glycosaminoglycans (GAGs). Compared with the normal cartilage, HA and GAG digestions modified the stick-slip behavior and increased surface roughness (wear) during sliding, whereas collagen digestion decreased the surface roughness. Importantly, friction forces increased up to 2, 10, and 5 times after HA, GAGs, and collagen digestion, respectively. Also, each digestion altered the friction map in different ways. Our results show that (i) wear is not directly related to the friction coefficient but (ii) more directly related to stick-slip sliding, even when present at small amplitudes, and that (iii) the different molecular components of joints work synergistically to prevent wear. Our results also suggest potential noninvasive diagnostic tools for sensing stick-slip in joints. PMID:23359687

Experiments on vibration-driven stick-slip locomotion: A sliding bifurcation perspective

NASA Astrophysics Data System (ADS)

Du, Zhouwei; Fang, Hongbin; Zhan, Xiong; Xu, Jian

2018-05-01

Dry friction appears at the contact interface between two surfaces and is the source of stick-slip vibrations. Instead of being a negative factor, dry friction is essential for vibration-driven locomotion system to take effect. However, the dry-friction-induced stick-slip locomotion has not been fully understood in previous research, especially in terms of experiments. In this paper, we experimentally study the stick-slip dynamics of a vibration-driven locomotion system from a sliding bifurcation perspective. To this end, we first design and build a vibration-driven locomotion prototype based on an internal piezoelectric cantilever. By utilizing the mechanical resonance, the small piezoelectric deformation is significantly amplified to drive the prototype to achieve effective locomotion. Through identifying the stick-slip characteristics in velocity histories, we could categorize the system's locomotion into four types and obtain a stick-slip categorization diagram. In each zone of the diagram the locomotion exhibits qualitatively different stick-slip dynamics. Such categorization diagram is actually a sliding bifurcation diagram; crossing from one stick-slip zone to another corresponds to the triggering of a sliding bifurcation. In addition, a simplified single degree-of-freedom model is established, with the rationality of simplification been explained theoretically and numerically. Based on the equivalent model, a numerical stick-slip categorization is also obtained, which shows good agreement with the experiments both qualitatively and quantitatively. To the best of our knowledge, this is the first work that experimentally generates a sliding bifurcation diagram. The obtained stick-slip categorizations deepen our understanding of stick-slip dynamics in vibration-driven systems and could serve as a base for system design and optimization.

Field-based performance of three pre-market rapid hepatitis C virus antibody assays in STAHR (Study to Assess Hepatitis C Risk) among young adults who inject drugs in San Diego, CA.

PubMed

Jewett, A; Smith, B D; Garfein, R S; Cuevas-Mota, J; Teshale, E H; Weinbaum, C M

2012-07-01

Approximately 4.1 million Americans are estimated to have been infected with hepatitis C virus (HCV), 45-85% of whom are unaware of their infection. Persons who inject drugs (PWID) account for 55.8% of all persons with HCV antibody (anti-HCV) in the U.S. PWID have limited access to healthcare and are infrequently tested for anti-HCV using conventional laboratory assays. To evaluate performance characteristics (sensitivity and specificity) of three, pre-market rapid point-of-care tests (one oral fluid and two finger-stick assays) from two manufacturers (Chembio and MedMira) in settings providing services to young adult PWID in San Diego, CA. Behavioral risk assessment surveys and testing for HCV were conducted among persons who reported injection drug use (IDU) within the past 6 months as part of the Study to Assess Hepatitis C Risk (STAHR) among PWID aged 18-40 years in 2009-2010. Sensitivity and specificity of the rapid anti-HCV assays were evaluated among STAHR participants, using two commonly used testing algorithms. Variability in sensitivity (76.6-97.1%) and specificity (99.0-100.0%) was found across assays. The highest sensitivity achieved for the Chembio finger-stick blood, Chembio oral fluid and MedMira finger-stick blood tests was 97.1%, 85.4% and 80.0% respectively; the highest specificity was 99.0%, 100.0% and 100.0%, respectively. In multivariate analysis false negative anti-HCV results were associated with female sex for the MedMira blood assay. Sensitive anti-HCV rapid assays are appropriate and feasible for high-prevalence, high-risk populations such as young PWID. Copyright © 2012 Elsevier B.V. All rights reserved.

Utility of bioassays (lettuce, red clover, red fescue, Microtox, MetSTICK, Hyalella, bait lamina) in ecological risk screening of acid metal (Zn) contaminated soil.

PubMed

Chapman, E Emily V; Hedrei Helmer, Stephanie; Dave, Göran; Murimboh, John D

2012-06-01

The objective of this study was to assess selected bioassays and ecological screening tools for their suitability in a weight of evidence risk screening process of acidic metal contaminated soil. Intact soil cores were used for the tests, which minimizes changes in pH and metal bioavailability that may result from homogenization and drying of the soil. Soil cores were spiked with ZnCl(2) or CaCl(2). Leachate collected from the soil cores was used to account for the exposure pathways through pore water and groundwater. Tests assessed included MetSTICK in soil cores and Microtox in soil leachate, lettuce (Lactuca sativa), red fescue (Festuca rubra) and red clover (Trifolium pratense) in the soil cores and lettuce and red clover in soil leachate, Hyallella azteca in soil leachate, and an ecological soil function test using Bait Lamina in soil cores. Microtox, H. azteca, lettuce and red fescue showed higher sensitivity to low pH than to Zn concentrations and are therefore not recommended as tests on intact acidic soil cores and soil leachate. The Bait Lamina test appeared sensitive to pH levels below 3.7 but should be investigated further as a screening tool in less acidic soils. Among the bioassays, the MetSTICK and the T. pratense bioassays in soil cores were the most sensitive to Zn, with the lowest nominal NOEC of 200 and 400mg Zn/kg d.w., respectively. These bioassays were also tolerant of low pH, which make them suitable for assessing hazards of metal contaminated acid soils. Copyright © 2012 Elsevier Inc. All rights reserved.

Evaluation of Aution Max AX-4030 and 9UB Uriflet, 10PA Aution Sticks urine dipsticks in the automated urine test strip analysis.

PubMed

Rota, Cristina; Biondi, Marco; Trenti, Tommaso

2011-09-26

Aution Max AX-4030, a test strip analyzer recently introduced to the market, represents an upgrade of the Aution Max AX-4280 widely employed for urinalysis. This new instrument model can allocate two different test strips at the same time. In the present study the two instruments have been compared together with the usage of Uriflet 9UB and the recently produced Aution Sticks 10PA urine strips, the latter presenting an additional test area for the measurement of urinary creatinine. Imprecision and correlation between instruments and strips have been evaluated for chemical-physical parameters. Accuracy was evaluated for protein, glucose and creatinine by comparing the semi-quantitative results to those obtained by quantitative methods. The well-known interference effect of high ascorbic acid levels on urine glucose test strip determination was evaluated, ascorbic acid influence was also evaluated on protein and creatinine determination. The two instruments have demonstrated comparable performances: precision and correlation between instruments and strips, evaluated for chemical-physical parameters, were always good. Furthermore, accuracy was always very good: results of protein and glucose semi-quantitative measurements resulted to be highly correlated with those obtained by quantitative methods. Moreover, the semi-quantitative measurements of creatinine, employing Aution Sticks 10PA urine strips, were highly comparable with quantitative results. 10PA urine strips are eligible for urine creatinine determination with the possibility of correcting urinalysis results for urinary creatinine concentration, whenever necessary and calculating the protein creatinine ratio. Further studies should be carried out to evaluate effectiveness and appropriateness of the usage of creatinine semi-quantitative analysis.

Glow Sticks: Spectra and Color Mixing

NASA Astrophysics Data System (ADS)

Birriel, Jennifer; Birriel, Ignacio

2014-10-01

Glow sticks are a popular Halloween staple familiar to most of our students. The production of light via a chemical reaction is called "chemiluminescence," and glow sticks are often used as demonstrations and experiments in the chemistry classroom to study reaction rates as a function of temperature.1-3 A black light can be used to illuminate glow sticks that have not been cracked or those that are "dead" in order to demonstrate fluorescence in liquid chemicals.4 In this article, we present the use of glow sticks as an inexpensive demonstration of spectra and color addition.

Automatic poisson peak harvesting for high throughput protein identification.

PubMed

Breen, E J; Hopwood, F G; Williams, K L; Wilkins, M R

2000-06-01

High throughput identification of proteins by peptide mass fingerprinting requires an efficient means of picking peaks from mass spectra. Here, we report the development of a peak harvester to automatically pick monoisotopic peaks from spectra generated on matrix-assisted laser desorption/ionisation time of flight (MALDI-TOF) mass spectrometers. The peak harvester uses advanced mathematical morphology and watershed algorithms to first process spectra to stick representations. Subsequently, Poisson modelling is applied to determine which peak in an isotopically resolved group represents the monoisotopic mass of a peptide. We illustrate the features of the peak harvester with mass spectra of standard peptides, digests of gel-separated bovine serum albumin, and with Escherictia coli proteins prepared by two-dimensional polyacrylamide gel electrophoresis. In all cases, the peak harvester proved effective in its ability to pick similar monoisotopic peaks as an experienced human operator, and also proved effective in the identification of monoisotopic masses in cases where isotopic distributions of peptides were overlapping. The peak harvester can be operated in an interactive mode, or can be completely automated and linked through to peptide mass fingerprinting protein identification tools to achieve high throughput automated protein identification.

Spectral analysis of the stick-slip phenomenon in "oral" tribological texture evaluation.

PubMed

Sanahuja, Solange; Upadhyay, Rutuja; Briesen, Heiko; Chen, Jianshe

2017-08-01

"Oral" tribology has become a new paradigm in food texture studies to understand complex texture attributes, such as creaminess, oiliness, and astringency, which could not be successfully characterized by traditional texture analysis nor by rheology. Stick-slip effects resulting from intermittent sliding motion during kinetic friction of oral mucosa could constitute an additional determining factor of sensory perception where traditional friction coefficient values and their Stribeck regimes fail in predicting different lubricant (food bolus and saliva) behaviors. It was hypothesized that the observed jagged behavior of most sliding force curves are due to stick-slip effects and depend on test velocity, normal load, surface roughness as well as lubricant type. Therefore, different measurement set-ups were investigated: sliding velocities from 0.01 to 40 mm/s, loads of 0.5 and 2.5 N as well as a smooth and a textured silicone contact surface. Moreover, dry contact measurements were compared to model food systems, such as water, oil, and oil-in-water emulsions. Spectral analysis permitted to extract the distribution of stick-slip magnitudes for specific wave numbers, characterizing the occurrence of jagged force peaks per unit sliding distance, similar to frequencies per unit time. The spectral features were affected by all the above mentioned tested factors. Stick-slip created vibration frequencies in the range of those detected by oral mechanoreceptors (0.3-400 Hz). The study thus provides a new insight into the use of tribology in food psychophysics. Dynamic spectral analysis has been applied for the first time to the force-displacement curves in "oral" tribology. Analyzing the stick-slip phenomenon in the dynamic friction provides new information that is generally overlooked or confused with machine noise and which may help to understand friction-related sensory attributes. This approach allows us to differentiate samples that have similar friction coefficient, but are perceived differently in the mouth. The next step of our research will be to combine spectral attributes, such as the magnitudes of specific wave number bands and possibly their evolution during sliding, together with friction coefficient and viscosity values of foods with sensory results. The highest potential lies in predicting smoothness in opposition to roughness of a surface, such as a rough tongue when eating astringent or dry foods, or of particles when eating grainy foods. The effects of food ingredients at the nano to macroscales can then be used to optimize a specific lubrication behavior. © 2017 Wiley Periodicals, Inc.

Hole filling with oriented sticks in ultrasound volume reconstruction

PubMed Central

Vaughan, Thomas; Lasso, Andras; Ungi, Tamas; Fichtinger, Gabor

2015-01-01

Abstract. Volumes reconstructed from tracked planar ultrasound images often contain regions where no information was recorded. Existing interpolation methods introduce image artifacts and tend to be slow in filling large missing regions. Our goal was to develop a computationally efficient method that fills missing regions while adequately preserving image features. We use directional sticks to interpolate between pairs of known opposing voxels in nearby images. We tested our method on 30 volumetric ultrasound scans acquired from human subjects, and compared its performance to that of other published hole-filling methods. Reconstruction accuracy, fidelity, and time were improved compared with other methods. PMID:26839907

Cigarette stick as valuable communicative real estate: a content analysis of cigarettes from 14 low-income and middle-income countries

PubMed Central

C Smith, Katherine; Washington, Carmen; Welding, Kevin; Kroart, Laura; Osho, Adami; Cohen, Joanna E

2017-01-01

Background The current cigarette market is heavily focused on low-income and middle-income countries. Branding of tobacco products is key to establishing and maintaining a customer base. Greater restrictions on marketing and advertising of tobacco products create an incentive for companies to focus more on branding via the product itself. We consider how tobacco sticks are used for communicative purposes in 14 low-income and middle-income countries with extensive tobacco markets. Methods In 2013, we collected and coded 3232 cigarette and kretek packs that were purchased from vendors in diverse neighbourhoods in 44 cities across the 14 low-income and middle-income countries with the greatest number of smokers. A single stick from each pack was assessed for branding, decorative and communicative elements using a common coding framework. Stick communication variables included brand name, brand image/logo, brand descriptor, colour and design carried through from pack, ‘capsule cigarette’ symbol, and embellishment of filter end. Results Communication and branding on the stick is essentially ubiquitous (99.75%); 97% of sticks include explicit branding (brand name or logo present). Colour is commonly carried through from the pack (95%), and some sticks (13%) include decorative elements matching the pack. Decorative elements can be found anywhere on the stick, including the filter tip (8%), and ‘convertible’ cigarettes include a symbol to show where to push. Conclusions Cigarette sticks are clearly valuable ‘real estate’ that tobacco companies are using for communicative purposes. Across all countries and brands, the stick communicates branding via text, colour and imagery. PMID:27534777

Sticking of Molecules on Nonporous Amorphous Water Ice

NASA Astrophysics Data System (ADS)

He, Jiao; Acharyya, Kinsuk; Vidali, Gianfranco

2016-05-01

Accurate modeling of physical and chemical processes in the interstellar medium (ISM) requires detailed knowledge of how atoms and molecules adsorb on dust grains. However, the sticking coefficient, a number between 0 and 1 that measures the first step in the interaction of a particle with a surface, is usually assumed in simulations of ISM environments to be either 0.5 or 1. Here we report on the determination of the sticking coefficient of H2, D2, N2, O2, CO, CH4, and CO2 on nonporous amorphous solid water. The sticking coefficient was measured over a wide range of surface temperatures using a highly collimated molecular beam. We showed that the standard way of measuring the sticking coefficient—the King-Wells method—leads to the underestimation of trapping events in which there is incomplete energy accommodation of the molecule on the surface. Surface scattering experiments with the use of a pulsed molecular beam are used instead to measure the sticking coefficient. Based on the values of the measured sticking coefficient, we suggest a useful general formula of the sticking coefficient as a function of grain temperature and molecule-surface binding energy. We use this formula in a simulation of ISM gas-grain chemistry to find the effect of sticking on the abundance of key molecules both on grains and in the gas phase.

STICKING OF MOLECULES ON NONPOROUS AMORPHOUS WATER ICE

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Jiao; Vidali, Gianfranco; Acharyya, Kinsuk, E-mail: gvidali@syr.edu

2016-05-20

Accurate modeling of physical and chemical processes in the interstellar medium (ISM) requires detailed knowledge of how atoms and molecules adsorb on dust grains. However, the sticking coefficient, a number between 0 and 1 that measures the first step in the interaction of a particle with a surface, is usually assumed in simulations of ISM environments to be either 0.5 or 1. Here we report on the determination of the sticking coefficient of H{sub 2}, D{sub 2}, N{sub 2}, O{sub 2}, CO, CH{sub 4}, and CO{sub 2} on nonporous amorphous solid water. The sticking coefficient was measured over a widemore » range of surface temperatures using a highly collimated molecular beam. We showed that the standard way of measuring the sticking coefficient—the King–Wells method—leads to the underestimation of trapping events in which there is incomplete energy accommodation of the molecule on the surface. Surface scattering experiments with the use of a pulsed molecular beam are used instead to measure the sticking coefficient. Based on the values of the measured sticking coefficient, we suggest a useful general formula of the sticking coefficient as a function of grain temperature and molecule-surface binding energy. We use this formula in a simulation of ISM gas–grain chemistry to find the effect of sticking on the abundance of key molecules both on grains and in the gas phase.« less

21 CFR 102.45 - Fish sticks or portions made from minced fish.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Fish sticks or portions made from minced fish. 102... for Specific Nonstandardized Foods § 102.45 Fish sticks or portions made from minced fish. (a) The common or usual name of the food product that resembles and is of the same composition as fish sticks or...

21 CFR 102.45 - Fish sticks or portions made from minced fish.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Fish sticks or portions made from minced fish. 102... for Specific Nonstandardized Foods § 102.45 Fish sticks or portions made from minced fish. (a) The common or usual name of the food product that resembles and is of the same composition as fish sticks or...

21 CFR 102.45 - Fish sticks or portions made from minced fish.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Fish sticks or portions made from minced fish. 102... for Specific Nonstandardized Foods § 102.45 Fish sticks or portions made from minced fish. (a) The common or usual name of the food product that resembles and is of the same composition as fish sticks or...

21 CFR 102.45 - Fish sticks or portions made from minced fish.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Fish sticks or portions made from minced fish. 102... for Specific Nonstandardized Foods § 102.45 Fish sticks or portions made from minced fish. (a) The common or usual name of the food product that resembles and is of the same composition as fish sticks or...

Standard Methodology for Assessment of Range of Motion While Wearing Body Armor

DTIC Science & Technology

2013-09-30

8 Figure 14: Meter stick (with close up...the tester to place against the measurement scale. A variety of rulers, meter sticks (Figure 14), and T square rulers (Figure 15) were used as well...All rulers and meter sticks had cm and mm marks on them. Figure 12: 20 cm block Figure 13: Measuring block Figure 14: Meter stick

The existence of a sticking region in free weight squats.

PubMed

van den Tillaar, Roland; Andersen, Vidar; Saeterbakken, Atle Hole

2014-09-29

The aim of this study was to investigate the existence of the sticking region in two legged free weight squats. Fifteen resistance-training males (age 24 ± 4 years, body mass 82 ± 11 kg, body height 179 ± 6 cm) with 6 ± 3 years of resistance-training experience performed 6-RM in free weight squats. The last repetition was analyzed for the existence of a sticking region. Only in 10 out of 15 participants a sticking region was observed. The observed sticking region was much shorter than in the bench press. Furthermore, rectus femoris decreased the EMG activity in contrast to increased EMG activity in biceps femoris around the sticking and surrounding region. No significant change in EMG activity was found for the lateral and medial vastus muscles. It is suggested that a combination of these muscle activity changes could be one of the causes of the existence of the sticking region in free weight squats.

The Existence of a Sticking Region in Free Weight Squats

PubMed Central

van den Tillaar, Roland; Andersen, Vidar; Saeterbakken, Atle Hole

2014-01-01

The aim of this study was to investigate the existence of the sticking region in two legged free weight squats. Fifteen resistance-training males (age 24 ± 4 years, body mass 82 ± 11 kg, body height 179 ± 6 cm) with 6 ± 3 years of resistance-training experience performed 6-RM in free weight squats. The last repetition was analyzed for the existence of a sticking region. Only in 10 out of 15 participants a sticking region was observed. The observed sticking region was much shorter than in the bench press. Furthermore, rectus femoris decreased the EMG activity in contrast to increased EMG activity in biceps femoris around the sticking and surrounding region. No significant change in EMG activity was found for the lateral and medial vastus muscles. It is suggested that a combination of these muscle activity changes could be one of the causes of the existence of the sticking region in free weight squats. PMID:25414740

Cyclic control stick

DOEpatents

Whitaker, Charles N.; Zimmermann, Richard E.

1989-01-01

A cyclic control stick of the type used in helicopters for reducing the safety hazards associated with such a mechanism in the event of a crewman being thrown violently into contact with the cyclic control stick resulting from a crash or the like. The cyclic control stick is configured to break away upon the exertion of an impact force which exceeds a predetermined value and/or is exerted for more than a momentary time duration. The cyclic control stick is also configured to be adjustable so as to locate the grip thereof as far away from the crewman as possible for safety reasons without comprising the comfort of the crewman or the use of the control stick, and a crushable pad is provided on the top of the grip for impact energy absorbing purposes.

Quantification of brake creep groan in vehicle tests and its relation with stick-slip obtained in laboratory tests

NASA Astrophysics Data System (ADS)

Neis, P. D.; Ferreira, N. F.; Poletto, J. C.; Matozo, L. T.; Masotti, D.

2016-05-01

This paper describes the development of a methodology for assessing and correlating stick-slip and brake creep groan. For doing that, results of tribotests are compared to data obtained in vehicle tests. A low velocity and a linear reduction in normal force were set for the tribotests. The vehicle tests consisted of subjecting a sport utility vehicle to three different ramp slopes. Creep groan events were measured by accelerometers placed on the brake calipers. The root mean square of the acceleration signal (QRMS parameter) was shown to be able to measure the creep groan severity resulting from the vehicle tests. Differences in QRMS were observed between front-rear and left-right wheels for all tested materials. Frequency spectrum analysis of the acceleration revealed that the wheel side and material type do not cause any significant shift in the creep groan frequency. QRMS measured in the vehicle tests presented good correlation with slip power (SP) summation. For this reason, SP summation may represent the "creep groan propensity" of brake materials. Thus, the proposed tribotest method can be utilized to predict the creep groan severity of brake materials in service.

Modulation of Higher-Order Olfaction Components on Executive Functions in Humans.

PubMed

Fagundo, Ana B; Jiménez-Murcia, Susana; Giner-Bartolomé, Cristina; Islam, Mohammed Anisul; de la Torre, Rafael; Pastor, Antoni; Casanueva, Felipe F; Crujeiras, Ana B; Granero, Roser; Baños, Rosa; Botella, Cristina; Fernández-Real, Jose M; Frühbeck, Gema; Gómez-Ambrosi, Javier; Menchón, José M; Tinahones, Francisco J; Fernández-Aranda, Fernando

2015-01-01

The prefrontal (PFC) and orbitofrontal cortex (OFC) appear to be associated with both executive functions and olfaction. However, there is little data relating olfactory processing and executive functions in humans. The present study aimed at exploring the role of olfaction on executive functioning, making a distinction between primary and more cognitive aspects of olfaction. Three executive tasks of similar difficulty were used. One was used to assess hot executive functions (Iowa Gambling Task-IGT), and two as a measure of cold executive functioning (Stroop Colour and Word Test-SCWT and Wisconsin Card Sorting Test-WCST). Sixty two healthy participants were included: 31 with normosmia and 31 with hyposmia. Olfactory abilities were assessed using the ''Sniffin' Sticks'' test and the olfactory threshold, odour discrimination and odour identification measures were obtained. All participants were female, aged between 18 and 60. Results showed that participants with hyposmia displayed worse performance in decision making (IGT; Cohen's-d = 0.91) and cognitive flexibility (WCST; Cohen's-d between 0.54 and 0.68) compared to those with normosmia. Multiple regression adjusted by the covariates participants' age and education level showed a positive association between odour identification and the cognitive inhibition response (SCWT-interference; Beta = 0.29; p = .034). The odour discrimination capacity was not a predictor of the cognitive executive performance. Our results suggest that both hot and cold executive functions seem to be associated with higher-order olfactory functioning in humans. These results robustly support the hypothesis that olfaction and executive measures have a common neural substrate in PFC and OFC, and suggest that olfaction might be a reliable cognitive marker in psychiatric and neurologic disorders.

Tetrahedra and Their Nets: Mathematical and Pedagogical Implications

ERIC Educational Resources Information Center

Mussa, Derege Haileselassie

2013-01-01

If one has three sticks (lengths), when can you make a triangle with the sticks? As long as any two of the lengths sum to a value strictly larger than the third length one can make a triangle. Perhaps surprisingly, if one is given 6 sticks (lengths) there is no simple way of telling if one can build a tetrahedron with the sticks. In fact, even…

Cigarette stick as valuable communicative real estate: a content analysis of cigarettes from 14 low-income and middle-income countries.

PubMed

C Smith, Katherine; Washington, Carmen; Welding, Kevin; Kroart, Laura; Osho, Adami; Cohen, Joanna E

2016-09-01

The current cigarette market is heavily focused on low-income and middle-income countries. Branding of tobacco products is key to establishing and maintaining a customer base. Greater restrictions on marketing and advertising of tobacco products create an incentive for companies to focus more on branding via the product itself. We consider how tobacco sticks are used for communicative purposes in 14 low-income and middle-income countries with extensive tobacco markets. In 2013, we collected and coded 3232 cigarette and kretek packs that were purchased from vendors in diverse neighbourhoods in 44 cities across the 14 low-income and middle-income countries with the greatest number of smokers. A single stick from each pack was assessed for branding, decorative and communicative elements using a common coding framework. Stick communication variables included brand name, brand image/logo, brand descriptor, colour and design carried through from pack, 'capsule cigarette' symbol, and embellishment of filter end. Communication and branding on the stick is essentially ubiquitous (99.75%); 97% of sticks include explicit branding (brand name or logo present). Colour is commonly carried through from the pack (95%), and some sticks (13%) include decorative elements matching the pack. Decorative elements can be found anywhere on the stick, including the filter tip (8%), and 'convertible' cigarettes include a symbol to show where to push. Cigarette sticks are clearly valuable 'real estate' that tobacco companies are using for communicative purposes. Across all countries and brands, the stick communicates branding via text, colour and imagery. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Experiments and numerical simulations of nonlinear vibration responses of an assembly with friction joints - Application on a test structure named "Harmony"

NASA Astrophysics Data System (ADS)

Claeys, M.; Sinou, J.-J.; Lambelin, J.-P.; Todeschini, R.

2016-03-01

In presence of friction, the frequency response function of a metallic assembly is strongly dependent on the excitation level. The local stick-slip behavior at the friction interfaces induces energy dissipation and local stiffness softening. These phenomena are studied both experimentally and numerically on a test structure named "Harmony". Concerning the numerical part, a classical complete methodology from the finite element and friction modeling to the prediction of the nonlinear vibrational response is implemented. The well-known Harmonic Balance Method with a specific condensation process on the nonlinear frictional elements is achieved. Also, vibration experiments are performed to validate not only the finite element model of the test structure named "Harmony" at low excitation levels but also to investigate the nonlinear behavior of the system on several excitation levels. A scanning laser vibrometer is used to measure the nonlinear behavior and the local stick-slip movement near the contacts.

The effects of an exercise with a stick on the lumbar spine and hip movement patterns during forward bending in patients with lumbar flexion syndrome.

PubMed

Yoon, Ji-yeon; Kim, Ji-won; Kang, Min-hyeok; An, Duk-hyun; Oh, Jae-seop

2015-01-01

Forward bending is frequently performed in daily activities. However, excessive lumbar flexion during forward bending has been reported as a risk factor for low back pain. Therefore, we examined the effects of an exercise strategy using a stick on the angular displacement and movement onset of lumbar and hip flexion during forward-bending exercises in patients with lumbar flexion syndrome. Eighteen volunteers with lumbar flexion syndrome were recruited in this study. Subjects performed forward-bending exercises with and without a straight stick in standing. The angular displacement and movement onset of lumbar and hip flexion during forward-bending exercises were measured by using a three dimensional motion analysis system. The significances of differences between the two conditions (with stick vs. without stick) was assessed using a one-way repeated analysis of variance. When using a stick during a forward-bending exercise, the peak angular displacement of lumbar flexion decreased significantly, and those of right and left-hip flexion increased significantly compared with those without a stick. The movement onset of lumbar flexion occurred significantly later, and the onset of right-hip flexion occurred significantly earlier with than without a stick. Based on these findings, a stick exercise was an effective method to prevent excessive lumbar flexion and more helpful in developing hip flexion during a forward-bending exercise. These findings will be useful for clinicians to teach self-exercise during forward bending in patients with lumbar flexion syndrome.

Task-specific modulation of adult humans' tool preferences: number of choices and size of the problem.

PubMed

Silva, Kathleen M; Gross, Thomas J; Silva, Francisco J

2015-03-01

In two experiments, we examined the effect of modifications to the features of a stick-and-tube problem on the stick lengths that adult humans used to solve the problem. In Experiment 1, we examined whether people's tool preferences for retrieving an out-of-reach object in a tube might more closely resemble those reported with laboratory crows if people could modify a single stick to an ideal length to solve the problem. Contrary to when adult humans have selected a tool from a set of ten sticks, asking people to modify a single stick to retrieve an object did not generally result in a stick whose length was related to the object's distance. Consistent with the prior research, though, the working length of the stick was related to the object's distance. In Experiment 2, we examined the effect of increasing the scale of the stick-and-tube problem on people's tool preferences. Increasing the scale of the task influenced people to select relatively shorter tools than had selected in previous studies. Although the causal structures of the tasks used in the two experiments were identical, their results were not. This underscores the necessity of studying physical cognition in relation to a particular causal structure by using a variety of tasks and methods.

Development of a New Punch Head Shape to Replicate Scale-Up Issues on a Laboratory Tablet Press III: Replicating sticking phenomenon using the SAS punch and evaluation by checking the tablet surface using 3D laser scanning microscope.

PubMed

Ito, Manabu; Aoki, Shigeru; Uchiyama, Jumpei; Yamato, Keisuke

2018-04-20

Sticking is a common observation in the scale-up stage on the punch tip using a commercial tableting machine. The difference in the total compression time between a laboratory and a commercial tableting machine is considered one of the main root causes of scale up issues in the tableting processes. The proposed Size Adjusted for Scale-up (SAS) punch can be used to adjust the consolidation and dwell times for commercial tableting machine. As a result, the sticking phenomenon is able to be replicated at the pilot scale stage. As reported in this paper, the quantification of sticking was measured using a 3D laser scanning microscope to check the tablet surface. It was shown that the sticking area decreased with the addition of magnesium stearate in the formulation, but the sticking depth was not affected by the additional amount of magnesium stearate. It is proposed that use of a 3D laser scanning microscope can be applied to evaluate sticking as a process analytical technology (PAT) tool and so sticking can be monitored continuously without stopping the machine. Copyright © 2018. Published by Elsevier Inc.

Vertical drying of a suspension of sticks: Monte Carlo simulation for continuous two-dimensional problem

NASA Astrophysics Data System (ADS)

Lebovka, Nikolai I.; Tarasevich, Yuri Yu.; Vygornitskii, Nikolai V.

2018-02-01

The vertical drying of a two-dimensional colloidal film containing zero-thickness sticks (lines) was studied by means of kinetic Monte Carlo (MC) simulations. The continuous two-dimensional problem for both the positions and orientations was considered. The initial state before drying was produced using a model of random sequential adsorption with isotropic orientations of the sticks. During the evaporation, an upper interface falls with a linear velocity in the vertical direction, and the sticks undergo translational and rotational Brownian motions. The MC simulations were run at different initial number concentrations (the numbers of sticks per unit area), pi, and solvent evaporation rates, u . For completely dried films, the spatial distributions of the sticks, the order parameters, and the electrical conductivities of the films in both the horizontal, x , and vertical, y , directions were examined. Significant evaporation-driven self-assembly and stratification of the sticks in the vertical direction was observed. The extent of stratification increased with increasing values of u . The anisotropy of the electrical conductivity of the film can be finely regulated by changes in the values of pi and u .

Field investigation of verglimit.

DOT National Transportation Integrated Search

1986-01-01

Verglimit is a calcium chloride based material that is incorporated into bituminous surface mixes to prevent ice and snow from sticking to the pavement. Two test sections were installed and the effectiveness of the Verglimit was evaluated for two win...

Atmospheric pressure gas chromatography coupled to quadrupole-time of flight mass spectrometry as a powerful tool for identification of non intentionally added substances in acrylic adhesives used in food packaging materials.

PubMed

Canellas, E; Vera, P; Domeño, C; Alfaro, P; Nerín, C

2012-04-27

Acrylic adhesives are used to manufacture multilayer laminates that are used in food packaging to form the geometric shape of the package as well as to stick labels on the packages. Once applied on the packaging adhesives can supply potential migrants that could endanger the packaged food. Adhesives are complex matrices where intentionally and non intentionally added substances are present, but the identification of the migrants is required by law. In this study atmospheric pressure gas chromatography coupled to a quadrupole hyphenated to a time of flight mass spectrometer (APGC-MS/Q-TOF) has been explored for identification of unknowns coming from three different acrylic adhesives. The results are compared to those obtained by conventional GC-MS-Q (quadrupole). Sixteen compounds were identified by GC-MS/Q and five of them were confirmed by APGC-MS/Q-TOF as their molecular ions were found. Moreover, additional three new compounds were identified and their structure was elucidated working with the spectra obtained by APGC-MS/Q-TOF. This finding was very relevant as these compounds were biocides suspected to be allergenic and cytotoxic in humans. Migration studies were carried out using Tenax as solid food simulant and the results showed that the three acrylic adhesives tested in this work were safe for being used in food packaging materials since the migration of compounds previously identified was below the limit established in the current legislation. Copyright © 2012 Elsevier B.V. All rights reserved.

Enhancement of acoustical performance of hollow tube sound absorber

NASA Astrophysics Data System (ADS)

Putra, Azma; Khair, Fazlin Abd; Nor, Mohd Jailani Mohd

2016-03-01

This paper presents acoustical performance of hollow structures utilizing the recycled lollipop sticks as acoustic absorbers. The hollow cross section of the structures is arranged facing the sound incidence. The effects of different length of the sticks and air gap on the acoustical performance are studied. The absorption coefficient was measured using impedance tube method. Here it is found that improvement on the sound absorption performance is achieved by introducing natural kapok fiber inserted into the void between the hollow structures. Results reveal that by inserting the kapok fibers, both the absorption bandwidth and the absorption coefficient increase. For test sample backed by a rigid surface, best performance of sound absorption is obtained for fibers inserted at the front and back sides of the absorber. And for the case of test sample with air gap, this is achieved for fibers introduced only at the back side of the absorber.

ECN-2409

NASA Image and Video Library

1970-06-17

Not every moment of a test pilot's day is serious business. In a moment of levity, NASA pilots Bill Dana (left) and John A. Manke try to drag Air Force test pilot Peter Hoag away from the HL-10 lifting body while Air Force Major Jerauld R. Gentry helps from the cockpit. These four men were the principal pilots for the HL-10 program. This was not the only prank involving the HL-10 and its pilots. Once "Captain Midnight" (Gentry) and the "Midnight Skulkers" sneaked into the NASA hangar and put "U.S. Air Force" on the aircraft using stick-on letters. Later, while Gentry was making a lifting-body flight, his 1954 Ford was "borrowed" from the parking lot, painted with yellow-green zinc-chromate primer, and decorated with large stick-on flowers about one foot in diameter. After Gentry returned from the flight, he was surprised to see what had happened to his car.

High-Alpha Research Vehicle (HARV) longitudinal controller: Design, analyses, and simulation resultss

NASA Technical Reports Server (NTRS)

Ostroff, Aaron J.; Hoffler, Keith D.; Proffitt, Melissa S.; Brown, Philip W.; Phillips, Michael R.; Rivers, Robert A.; Messina, Michael D.; Carzoo, Susan W.; Bacon, Barton J.; Foster, John F.

1994-01-01

This paper describes the design, analysis, and nonlinear simulation results (batch and piloted) for a longitudinal controller which is scheduled to be flight-tested on the High-Alpha Research Vehicle (HARV). The HARV is an F-18 airplane modified for and equipped with multi-axis thrust vectoring. The paper includes a description of the facilities, a detailed review of the feedback controller design, linear analysis results of the feedback controller, a description of the feed-forward controller design, nonlinear batch simulation results, and piloted simulation results. Batch simulation results include maximum pitch stick agility responses, angle of attack alpha captures, and alpha regulation for full lateral stick rolls at several alpha's. Piloted simulation results include task descriptions for several types of maneuvers, task guidelines, the corresponding Cooper-Harper ratings from three test pilots, and some pilot comments. The ratings show that desirable criteria are achieved for almost all of the piloted simulation tasks.

Effects of 20 mg oral Δ9-tetrahydrocannabinol on the olfactory function of healthy volunteers*

PubMed Central

Walter, Carmen; Oertel, Bruno G; Ludyga, Dagmar; Ultsch, Alfred; Hummel, Thomas; Lötsch, Jörn

2014-01-01

Aims Olfactory loss impairs the patient's quality of life. In individualized therapies, olfactory drug effects gain clinical importance. Molecular evidence suggests that among drugs with potential olfactory effects is Δ9-tetrahydrocannabinol (THC), which is approved for several indications, including neuropathic pain or analgesia in cancer patients. The present study aimed at assessing the olfactory effects of THC to be expected during analgesic treatment. Methods The effects of 20 mg oral THC on olfaction were assessed in a placebo-controlled, randomized cross-over study in healthy volunteers. Using an established olfactory test (Sniffin' Sticks), olfactory thresholds, odour discrimination and odour identification were assessed in 15 subjects at baseline and 2 h after THC administration. Results Δ9-Tetrahydrocannabinol impaired the performance of subjects (n = 15) in the olfactory test. Specifically, olfactory thresholds were increased and odour discrimination performance was reduced. This resulted in a significant drop in composite threshold, discrimination, identification (TDI) olfactory score by 5.5 points (from 37.7 ± 4.2 to 32.2 ± 5.6, 95% confidence interval for differences THC vs. placebo, −7.8 to −2.0, P = 0.003), which is known to be a subjectively perceptible impairment of olfactory function. Conclusions Considering the resurgence of THC in medical use for several pathological conditions, the present results indicate that THC-based analgesics may be accompanied by subjectively noticeable reductions in olfactory acuity. In particular, for patients relying on their sense of smell, this might be relevant information for personalized therapy strategies. PMID:24802974

Effects of 20 mg oral Δ(9) -tetrahydrocannabinol on the olfactory function of healthy volunteers.

PubMed

Walter, Carmen; Oertel, Bruno G; Ludyga, Dagmar; Ultsch, Alfred; Hummel, Thomas; Lötsch, Jörn

2014-11-01

Olfactory loss impairs the patient's quality of life. In individualized therapies, olfactory drug effects gain clinical importance. Molecular evidence suggests that among drugs with potential olfactory effects is Δ(9) -tetrahydrocannabinol (THC), which is approved for several indications, including neuropathic pain or analgesia in cancer patients. The present study aimed at assessing the olfactory effects of THC to be expected during analgesic treatment. The effects of 20 mg oral THC on olfaction were assessed in a placebo-controlled, randomized cross-over study in healthy volunteers. Using an established olfactory test (Sniffin' Sticks), olfactory thresholds, odour discrimination and odour identification were assessed in 15 subjects at baseline and 2 h after THC administration. Δ(9) -Tetrahydrocannabinol impaired the performance of subjects (n = 15) in the olfactory test. Specifically, olfactory thresholds were increased and odour discrimination performance was reduced. This resulted in a significant drop in composite threshold, discrimination, identification (TDI) olfactory score by 5.5 points (from 37.7 ± 4.2 to 32.2 ± 5.6, 95% confidence interval for differences THC vs. placebo, -7.8 to -2.0, P = 0.003), which is known to be a subjectively perceptible impairment of olfactory function. Considering the resurgence of THC in medical use for several pathological conditions, the present results indicate that THC-based analgesics may be accompanied by subjectively noticeable reductions in olfactory acuity. In particular, for patients relying on their sense of smell, this might be relevant information for personalized therapy strategies. © 2014 The British Pharmacological Society.

When sticky fluids don't stick: yield-stress fluid drops on heated surfaces

NASA Astrophysics Data System (ADS)

Blackwell, Brendan; Wu, Alex; Ewoldt, Randy

2016-11-01

Yield-stress fluids, including gels and pastes, are effectively fluid at high stress and solid at low stress. In liquid-solid impacts, these fluids can stick and accumulate where they impact; this sticky behavior motivates several applications of these rheologically-complex materials. Here we describe experiments with aqueous yield stress fluids that are more 'sticky' than water at room temperature (e.g. supporting larger coating thicknesses), but are less 'sticky' at higher temperatures. Specifically, we study the conditions for aqueous yield stress fluids to bounce and slide on heated surfaces when water sticks. Here we present high-speed imaging and color interferometry to observe the thickness of the vapor layer between the drop and the surface during both stick and non-stick events. We use these data to gain insight into the physics behind the phenomenon of the yield-stress fluids bouncing and sliding, rather than sticking, on hot surfaces.

Craft Stick Beams

NASA Technical Reports Server (NTRS)

Karplus, Alan K.

1996-01-01

The objective of this exercise is to provide a phenomenological 'hands-on' experience that shows how geometry can affect the load carrying capacity of a material used in construction, how different materials have different failure characteristics, and how construction affects the performance of a composite material. This will be accomplished by building beams of a single material and composite beams of a mixture of materials (popsicle sticks, fiberboard sheets, and tongue depressors); testing these layered beams to determine how and where they fail; and based on the failure analysis, designing a layered beam that will fail in a predicted manner. The students will learn the effects of lamination, adhesion, and geometry in layered beam construction on beam strength and failure location.

Preslip and cascade processes initiating laboratory stick slip

USGS Publications Warehouse

McLaskey, Gregory C.; Lockner, David A.

2014-01-01

Recent modeling studies have explored whether earthquakes begin with a large aseismic nucleation process or initiate dynamically from the rapid growth of a smaller instability in a “cascade-up” process. To explore such a case in the laboratory, we study the initiation of dynamic rupture (stick slip) of a smooth saw-cut fault in a 76mm diameter cylindrical granite laboratory sample at 40–120MPa confining pressure. We use a high dynamic range recording system to directly compare the seismic waves radiated during the stick-slip event to those radiated from tiny (M _6) discrete seismic events, commonly known as acoustic emissions (AEs), that occur in the seconds prior to each large stick slip. The seismic moments, focal mechanisms, locations, and timing of the AEs all contribute to our understanding of their mechanics and provide us with information about the stick-slip nucleation process. In a sequence of 10 stick slips, the first few microseconds of the signals recorded from stick-slip instabilities are nearly indistinguishable from those of premonitory AEs. In this sense, it appears that each stick slip begins as an AE event that rapidly (~20 μs) grows about 2 orders of magnitude in linear dimension and ruptures the entire 150mm length of the simulated fault. We also measure accelerating fault slip in the final seconds before stick slip. We estimate that this slip is at least 98% aseismic and that it both weakens the fault and produces AEs that will eventually cascade-up to initiate the larger dynamic rupture.

Evaluation of some properties of two fiber-reinforced composite materials.

PubMed

Lassila, Lippo V J; Tezvergil, Arzu; Lahdenperä, Milla; Alander, Pasi; Shinya, Akiyoshi; Shinya, Akikazu; Vallittu, Pekka K

2005-08-01

Water sorption, flexural properties, bonding properties, and elemental composition of photopolymerizable resin-impregnated fiber-reinforced composite (FRC) materials (everStick C&B and BR-100) (FPD) were evaluated in this study. Bar-shaped specimens (2 x 2 x 25 mm) were prepared for water sorption and flexural strength testing. The specimens (n = 6) were polymerized either with a hand light-curing unit for 40 s or, additionally, in a light-curing oven for 20 min and stored in water for 30 days. Water sorption was measured during this time, followed by measurements of flexural strength and modulus. A shear bond strength test was performed to determine the bonding characteristics of polymerized FRC to composite resin luting cement (Panavia-F), (n = 15). The cement was bonded to the FRC substrate and the specimens were thermocycled 5000 times (5-55 degrees C) in water. SEM/EDS were analyzed to evaluate the elemental composition of the glass fibers and the fiber distribution in cross section. ANOVA showed significant differences in water sorption according to brand (p < 0.05). Water sorption of everStick C&B was 1.86 wt% (hand-unit polymerized) and 1.94 wt% (oven polymerized), whereas BR-100 was 1.07 wt% and 1.17 wt%, respectively. The flexural strength of everStick C&B after 30 days' water storage was 559 MPa (hand-unit polymerized) and 796 MPa (oven-polymerized); for BR-100, the values were 547 MPa and 689 MPa, respectively. Mean shear bond strength of composite resin cement to the FRC varied between 20.1 and 23.7 MPa, showing no statistical difference between the materials. SEM/EDS analysis revealed that fibers of both FRC materials consist of the same oxides (SiO2, CaO, and Al2O3) in ratios. The distribution of fibers in the cross section of specimens was more evenly distributed in everStick C&B than in BR-100. The results of this study suggest that there are some differences in the tested properties of the FRC materials.

Investigation of Particle Deposition in Internal Cooling Cavities of a Nozzle Guide Vane

NASA Astrophysics Data System (ADS)

Casaday, Brian Patrick

Experimental and computational studies were conducted regarding particle deposition in the internal film cooling cavities of nozzle guide vanes. An experimental facility was fabricated to simulate particle deposition on an impingement liner and upstream surface of a nozzle guide vane wall. The facility supplied particle-laden flow at temperatures up to 1000°F (540°C) to a simplified impingement cooling test section. The heated flow passed through a perforated impingement plate and impacted on a heated flat wall. The particle-laden impingement jets resulted in the buildup of deposit cones associated with individual impingement jets. The deposit growth rate increased with increasing temperature and decreasing impinging velocities. For some low flow rates or high flow temperatures, the deposit cones heights spanned the entire gap between the impingement plate and wall, and grew through the impingement holes. For high flow rates, deposit structures were removed by shear forces from the flow. At low temperatures, deposit formed not only as individual cones, but as ridges located at the mid-planes between impinging jets. A computational model was developed to predict the deposit buildup seen in the experiments. The test section geometry and fluid flow from the experiment were replicated computationally and an Eulerian-Lagrangian particle tracking technique was employed. Several particle sticking models were employed and tested for adequacy. Sticking models that accurately predicted locations and rates in external deposition experiments failed to predict certain structures or rates seen in internal applications. A geometry adaptation technique was employed and the effect on deposition prediction was discussed. A new computational sticking model was developed that predicts deposition rates based on the local wall shear. The growth patterns were compared to experiments under different operating conditions. Of all the sticking models employed, the model based on wall shear, in conjunction with geometry adaptation, proved to be the most accurate in predicting the forms of deposit growth. It was the only model that predicted the changing deposition trends based on flow temperature or Reynolds number, and is recommended for further investigation and application in the modeling of deposition in internal cooling cavities.

Statistics of acoustic emissions and stress drops during granular shearing using a stick-slip fiber bundle mode

NASA Astrophysics Data System (ADS)

Cohen, D.; Michlmayr, G.; Or, D.

2012-04-01

Shearing of dense granular materials appears in many engineering and Earth sciences applications. Under a constant strain rate, the shearing stress at steady state oscillates with slow rises followed by rapid drops that are linked to the build up and failure of force chains. Experiments indicate that these drops display exponential statistics. Measurements of acoustic emissions during shearing indicates that the energy liberated by failure of these force chains has power-law statistics. Representing force chains as fibers, we use a stick-slip fiber bundle model to obtain analytical solutions of the statistical distribution of stress drops and failure energy. In the model, fibers stretch, fail, and regain strength during deformation. Fibers have Weibull-distributed threshold strengths with either quenched and annealed disorder. The shape of the distribution for drops and energy obtained from the model are similar to those measured during shearing experiments. This simple model may be useful to identify failure events linked to force chain failures. Future generalizations of the model that include different types of fiber failure may also allow identification of different types of granular failures that have distinct statistical acoustic emission signatures.

Estimation of the longitudinal and lateral-directional aerodynamic parameters from flight data for the NASA F/A-18 HARV

NASA Technical Reports Server (NTRS)

Napolitano, Marcello R.

1996-01-01

This progress report presents the results of an investigation focused on parameter identification for the NASA F/A-18 HARV. This aircraft was used in the high alpha research program at the NASA Dryden Flight Research Center. In this study the longitudinal and lateral-directional stability derivatives are estimated from flight data using the Maximum Likelihood method coupled with a Newton-Raphson minimization technique. The objective is to estimate an aerodynamic model describing the aircraft dynamics over a range of angle of attack from 5 deg to 60 deg. The mathematical model is built using the traditional static and dynamic derivative buildup. Flight data used in this analysis were from a variety of maneuvers. The longitudinal maneuvers included large amplitude multiple doublets, optimal inputs, frequency sweeps, and pilot pitch stick inputs. The lateral-directional maneuvers consisted of large amplitude multiple doublets, optimal inputs and pilot stick and rudder inputs. The parameter estimation code pEst, developed at NASA Dryden, was used in this investigation. Results of the estimation process from alpha = 5 deg to alpha = 60 deg are presented and discussed.

Physics of the mechanical toy Gee-Haw Whammy Diddle.

PubMed

Marek, Martin; Badin, Matej; Plesch, Martin

2018-02-27

Gee-Haw Whammy Diddle is a seemingly simple mechanical toy consisting of a wooden stick and a second stick that is made up of a series of notches with a propeller at its end. When the wooden stick is pulled over the notches, the propeller starts to rotate. Despite its simplicity, physical principles governing the motion of the stick and the propeller are rather complicated and interesting. Here we provide a thorough analysis of the system and parameters influencing the motion. We show that contrary to the results published on this topic so far, neither elliptic motion of the stick nor frequency synchronization is needed for starting a stable motion of the propeller.

The impact of wood ice cream sticks' origin on the aroma of exposed ice cream mixes.

PubMed

Jiamyangyuen, S; Delwiche, J F; Harper, W J

2002-02-01

The effect of volatile compounds in white birch sticks obtained from four different geographical locations on the aroma of ice cream mix was investigated. Sensory evaluation, (specifically, a series of warmed-up paired comparisons) was conducted on stick-exposed ice cream mixes to determine whether aroma differences in those mixes could be detected. Batches of ice cream mix were exposed to the sticks and aged for 6 d at 4 degrees C and then assessed by the panelists by pairwise comparison. Findings suggest that differences in aroma of mixes that have been exposed to white birch sticks from four different geographical origins can be distinguished perceptually.

Effect of operation parameters on the slagging near swirl coal burner throat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Changfu You; Yong Zhou

2006-10-15

Fluid flow, heat transfer, coal combustion, and slagging processes had been numerically simulated near a swirl burner throat. The effect of the ratio distribution of each burner air, their swirling numbers, and the coal character on the slagging process had been analyzed. The computation results indicate that the maximal sticking-particle numbers occur at the uppermost waterwall, while the sticking-particle number at neither waterwall near the swirl burner outlet is very small. The swirling number has a significant effect on the number of the sticking particle. The sticking-particle number increases rapidly with the increment of the outer secondary air and themore » primary air-swirling numbers, respectively, because it can strengthen the flow entrainment ability to carry more particles to the waterwall. The inner secondary air has a complicated influence on the slagging process. When the inner secondary air-swirling number is about middle intensive degree (about 0.9), the sticking-particle number reaches maximum. If the inner secondary air-swirling number continues increasing, then the coal particles will combust completely and reduce the particle concentration, thus decrease the sticking-particle number. The ratio of each air has a slight influence on the sticking-particle number relative to the swirling number. The coal particles with small mean diameter combust completely, which can reduce the sticking-particle number. 13 refs., 16 figs., 1 tab.« less

The impact of automatic devices for capillary blood collection on efficiency and pain response in newborns: A randomized controlled trial.

PubMed

Sorrentino, G; Fumagalli, M; Milani, S; Cortinovis, I; Zorz, A; Cavallaro, G; Mosca, F; Plevani, L

2017-07-01

The heel stick is the method of choice in most neonatal units for capillary blood sampling, and it represents the most common event among all painful procedures performed on newborns. The type and design of heel stick device and the clinical procedure to collect a blood sample may have an impact on newborn pain response as well. To compare the pain response and efficiency of different automated devices for capillary blood collection in newborns. Randomized clinical trial. Postnatal ward of a tertiary-care university hospital in Italy. Newborn infants at gestational age ≥34 weeks undergoing the metabolic screening test after the 49th hour of life. A total of 762 neonates were recruited and randomized into 6 groups (127 babies in each group) assigned to 6 different capillary blood collection devices (Ames Minilet™ Lancet; Cardinal Health Gentleheel ® ; Natus Medical NeatNick™; BD Quikheel™ Lancet; Vitrex Steriheel ® Baby Lancet; Accriva Diagnostics Tenderfoot ® ). The following data were collected and assessed for each of the 6 groups evaluated: a) number of heel sticks, b) pain score according to the Neonatal Infant Pain Scale (NIPS) and c) need to squeeze the heel. The Ames Minilet™ Lancet device was found to perform by far the worst compared to the five device underexamination: it required the highest number of sticks (mean=3.91; 95% CI: 3.46-4.36), evoked the most intense pain (mean=3.98; 95% CI: 3.77-4.20), and most frequently necessitated squeezing the heel (92.9%; 95% CI: 86.9-96.3). The five devices under examination appeared to be similar in terms of the number of sticks required, but differed slightly in NIPS score and in need to squeeze the heel. The Accriva Diagnostics Tenderfoot ® device demonstrated the greatest efficiency for blood sampling and evoked the least pain. With this device, the metabolic screening test could be performed with a single skin incision in the large majority of infants (98.4%), heel squeezing was limited to only 6.3% of infants, and the NIPS score turns out to be lower than other devices in our study (1.22; 95% CI 1.05-1.39). Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of Hydroxyapatite Stick on Pedicle Screw Fixation in Degenerative Lumbar Spine: Biomechanical and Radiologic Study.

PubMed

Shin, Sung Joon; Lee, Ji-Ho; Lee, Jae Hyup

2017-07-01

A prospective, within-patient, left-right comparative study. To evaluate the efficacy of hydroxyapatite (HA) stick augmentation method by comparing the insertional torque of the pedicle screw in osteoporotic and nonosteoporotic patients. Unsatisfactory clinical outcomes after spine surgery in osteoporotic patients are related to pedicle screw loosening or pull-outs. HA, as a bone graft extender, has a possibility to enhance the fixation strength at the bone-screw interface. From November 2009 to December 2010, among patients who required bilateral pedicle screw fixation for lumbar spine surgery, 22 patients were enrolled, who recieved unilateral HA stick augmentation and completed intraoperative insertional torque measurement of each pedicle screws. On the basis of preoperative evaluation of bone mineral density, patients with osteoporosis had 2 HA sticks inserted unilaterally, and 1 stick for patients without osteoporosis. Pedicle screw loosening and pull-outs were assessed using 12-month postoperative CT scans and follow-up radiographs. Clinical evaluation was done preoperatively and at 1 year postoperatively, based on Visual Analog Scale score, Oswestry Disability Index, and Short Form-36 Health Survey. Regardless of bone mineral density, the average torque value of all pedicle screws with HA stick insertion (HA stick inserted group) was significantly higher than that of all pedicle screws without HA insertion (control group) (P<0.0001). Same results were seen in the HA stick inserted subgroups and the control subgroups within both of the osteoporosis group (P=0.009) and the nonosteoporosis group (P=0.0004). There was no statistically significant difference of the rate of pedicle screw loosening in between the HA stick inserted group and the control group. Clinical evaluation also showed no statistically significant difference in between patients with loosening and those without. The enhancement of initial pedicle screw fixation strength in osteoporotic patients can be achieved by HA stick augmentation.

Influence of movement regime of stick-slip process on the size distribution of accompanying acoustic emission characteristics

NASA Astrophysics Data System (ADS)

Matcharashvili, Teimuraz; Chelidze, Tamaz; Zhukova, Natalia; Mepharidze, Ekaterine; Sborshchikov, Alexander

2010-05-01

Many scientific works on dynamics of earthquake generation are devoted to qualitative and quantitative reproduction of behavior of seismic faults. Number of theoretical, numerical or physical models are already designed for this purpose. Main assumption of these works is that the correct model must be capable to reproduce power law type relation for event sizes with magnitudes greater than or equal to a some threshold value, similar to Gutenberg-Richter (GR) law for the size distribution of earthquakes. To model behavior of a seismic faults in laboratory conditions spring-block experimental systems are often used. They enable to generate stick-slip movement, intermittent behavior occurring when two solids in contact slide relative to each other driven at a constant velocity. Wide interest to such spring-block models is caused by the fact that stick-slip is recognized as a basic process underlying earthquakes generation along pre-existing faults. It is worth to mention, that in stick slip experiments reproduction of power law, in slip events size distribution, with b values close or equal to the one found for natural seismicity is possible. Stick-slip process observed in these experimental models is accompanied by a transient elastic waves propagation generated during the rapid release of stress energy in spring-block system. Oscillations of stress energy can be detected as a characteristic acoustic emission (AE). Accompanying stick slip AE is the subject of intense investigation, but many aspects of this process are still unclear. In the present research we aimed to investigate dynamics of stick slip AE in order to find whether its distributional properties obey power law. Experiments have been carried out on spring-block system consisting of fixed and sliding plates of roughly finished basalt samples. The sliding block was driven with a constant velocity. Experiments have been carried out for five different stiffness of pulling spring. Thus five different regimes of stick slip movement has been maintained. The AE accompanying the elementary slip events of stick-slip process were recorded on a PC sound card. The sensor for the AE was a lead circonate-titanate with a natural frequency of 100 KHz. In order to ensure standard conditions in each experiment, sliding surfaces were sanded up by sandpaper and cleaned of a dust. AE data analysis consisted of signal conditioning, filtering, and correct wave trains separation. Onset time of AE was determined at a minimun of Akaike Information Criterion. Afterwards time series of AE characteristics such as: recurrence times between consecutive AE bursts as well as time intervals between their maximums, duration of AE bursts, energy and power of AE, max by modulus of AE wave train amplitudes, etc. have been compiled. Cumulative probability distributions for all these data sets have been constructed and tested on the subject of GR type power law relation. It was found that characteristics of AE of stick slip process are strongly depending on the movement regime. Number of registered AE essentially increased for stiffer spring. At the same time recurrence times and emitted AE energy decreases. Power law type relation have not been observed for all AE characteristics and not for all considered regimes of movement. Power law relation, close to observed for real seismicity, was found for power of AE time series at stiffer springs. It is interesting that recurrence times between maximums of consecutive AE bursts and duration of AE bursts, reveal b in the range of 0.6-1.65. These results point that experimental conditions of stick slip process including movement regimes should be selected with care to ensure similarity between model and natural seismicity distributional characteristics.

Characterization of cosmetic sticks at Xiaohe Cemetery in early Bronze Age Xinjiang, China

NASA Astrophysics Data System (ADS)

Mai, Huijuan; Yang, Yimin; Abuduresule, Idelisi; Li, Wenying; Hu, Xingjun; Wang, Changsui

2016-01-01

Cosmetics have been studied for a long time in the society and culture research, and its consumption is regarded as a cultural symbol of human society. This paper focuses on the analysis of the red cosmetic sticks, found in Xiaohe Cemetery (1980-1450BC), Xinjiang, China. The structure of the red cosmetic sticks was disclosed by SR-μCT scanning (Synchrotron Radiation Micro-computed Tomography), while the chemical components were characterized by FTIR (Fourier Transform Infrared Spectroscopy), Raman Spectroscopy and Proteomics. The results suggested that the cosmetic sticks were made from the cattle heart and covered with a layer of hematite powders as the pigment. Given the numerous red painted relics in Xiaohe Cemetery, this kind of cosmetic sticks might be used as a primitive form of crayon for makeup and painting. The usage of cattle hearts as cosmetic sticks is firstly reported up to our knowledge, which not only reveals the varied utilizations of cattle in Xiaohe Cemetery but also shows the distinctive religious function. Furthermore, these red cosmetic sticks were usually buried with women, implying that the woman may be the painter and play a special role in religious activities.

Stick balancing, falls and Dragon-Kings

NASA Astrophysics Data System (ADS)

Cabrera, J. L.; Milton, J. G.

2012-05-01

The extent to which the occurrence of falls, the dominant feature of human attempts to balance a stick at their fingertip, can be predicted is examined in the context of the "Dragon-King" hypothesis. For skilled stick balancers, fluctuations in the controlled variable, namely the vertical displacement angle θ, exhibit power law behaviors. When stick balancing is made less stable by either decreasing the length of the stick or by requiring the subject to balance the stick on the surface of a table tennis racket, systematic departures from the power law behaviors are observed in the range of large θ. This observation raises the possibility that the presence of departures from the power law in the large length scale region, possibly Dragon-Kings, may identify situations in which the occurrence of a fall is more imminent. However, whether or not Dragon-Kings are observed, there is a Weibull-type survival function for stick falling. The possibility that increased risk of falling can, at least to some extent, be predicted from fluctuations in the controlled variable before the event occurs has important implications for the development of preventative strategies for the management of phenomena ranging from earthquakes to epileptic seizures to falls in the elderly.

Characterization of cosmetic sticks at Xiaohe Cemetery in early Bronze Age Xinjiang, China

PubMed Central

Mai, Huijuan; Yang, Yimin; Abuduresule, Idelisi; Li, Wenying; Hu, Xingjun; Wang, Changsui

2016-01-01

Cosmetics have been studied for a long time in the society and culture research, and its consumption is regarded as a cultural symbol of human society. This paper focuses on the analysis of the red cosmetic sticks, found in Xiaohe Cemetery (1980–1450BC), Xinjiang, China. The structure of the red cosmetic sticks was disclosed by SR-μCT scanning (Synchrotron Radiation Micro-computed Tomography), while the chemical components were characterized by FTIR (Fourier Transform Infrared Spectroscopy), Raman Spectroscopy and Proteomics. The results suggested that the cosmetic sticks were made from the cattle heart and covered with a layer of hematite powders as the pigment. Given the numerous red painted relics in Xiaohe Cemetery, this kind of cosmetic sticks might be used as a primitive form of crayon for makeup and painting. The usage of cattle hearts as cosmetic sticks is firstly reported up to our knowledge, which not only reveals the varied utilizations of cattle in Xiaohe Cemetery but also shows the distinctive religious function. Furthermore, these red cosmetic sticks were usually buried with women, implying that the woman may be the painter and play a special role in religious activities. PMID:26820435

Characterization of cosmetic sticks at Xiaohe Cemetery in early Bronze Age Xinjiang, China.

PubMed

Mai, Huijuan; Yang, Yimin; Abuduresule, Idelisi; Li, Wenying; Hu, Xingjun; Wang, Changsui

2016-01-28

Cosmetics have been studied for a long time in the society and culture research, and its consumption is regarded as a cultural symbol of human society. This paper focuses on the analysis of the red cosmetic sticks, found in Xiaohe Cemetery (1980-1450BC), Xinjiang, China. The structure of the red cosmetic sticks was disclosed by SR-μCT scanning (Synchrotron Radiation Micro-computed Tomography), while the chemical components were characterized by FTIR (Fourier Transform Infrared Spectroscopy), Raman Spectroscopy and Proteomics. The results suggested that the cosmetic sticks were made from the cattle heart and covered with a layer of hematite powders as the pigment. Given the numerous red painted relics in Xiaohe Cemetery, this kind of cosmetic sticks might be used as a primitive form of crayon for makeup and painting. The usage of cattle hearts as cosmetic sticks is firstly reported up to our knowledge, which not only reveals the varied utilizations of cattle in Xiaohe Cemetery but also shows the distinctive religious function. Furthermore, these red cosmetic sticks were usually buried with women, implying that the woman may be the painter and play a special role in religious activities.

Identification and simulation evaluation of an AH-64 helicopter hover math model

NASA Technical Reports Server (NTRS)

Schroeder, J. A.; Watson, D. C.; Tischler, M. B.; Eshow, M. M.

1991-01-01

Frequency-domain parameter-identification techniques were used to develop a hover mathematical model of the AH-64 Apache helicopter from flight data. The unstable AH-64 bare-airframe characteristics without a stability-augmentation system were parameterized in the convectional stability-derivative form. To improve the model's vertical response, a simple transfer-function model approximating the effects of dynamic inflow was developed. Additional subcomponents of the vehicle were also modeled and simulated, such as a basic engine response for hover and the vehicle stick dynamic characteristics. The model, with and without stability augmentation, was then evaluated by AH-64 pilots in a moving-base simulation. It was the opinion of the pilots that the simulation was a satisfactory representation of the aircraft for the tasks of interest. The principal negative comment was that height control was more difficult in the simulation than in the aircraft.

Control at stability's edge minimizes energetic costs: expert stick balancing

PubMed Central

Meyer, Ryan; Zhvanetsky, Max; Ridge, Sarah; Insperger, Tamás

2016-01-01

Stick balancing on the fingertip is a complex voluntary motor task that requires the stabilization of an unstable system. For seated expert stick balancers, the time delay is 0.23 s, the shortest stick that can be balanced for 240 s is 0.32 m and there is a ° dead zone for the estimation of the vertical displacement angle in the saggital plane. These observations motivate a switching-type, pendulum–cart model for balance control which uses an internal model to compensate for the time delay by predicting the sensory consequences of the stick's movements. Numerical simulations using the semi-discretization method suggest that the feedback gains are tuned near the edge of stability. For these choices of the feedback gains, the cost function which takes into account the position of the fingertip and the corrective forces is minimized. Thus, expert stick balancers optimize control with a combination of quick manoeuvrability and minimum energy expenditures. PMID:27278361

Incentivizing wellness in the workplace: sticks (not carrots) send stigmatizing signals.

PubMed

Tannenbaum, David; Valasek, Chad J; Knowles, Eric D; Ditto, Peter H

2013-08-01

Companies often provide incentives for employees to maintain healthy lifestyles. These incentives can take the form of either discounted premiums for healthy-weight employees ("carrot" policies) or increased premiums for overweight employees ("stick" policies). In the three studies reported here, we demonstrated that even when stick and carrot policies are formally equivalent, they do not necessarily convey the same information to employees. Stick but not carrot policies were viewed as reflecting negative company attitudes toward overweight employees (Study 1a) and were evaluated especially negatively by overweight participants (Study 1b). This was true even when overweight employees paid less money under the stick than under the carrot policy. When acting as policymakers (Study 2), participants with high levels of implicit overweight bias were especially likely to choose stick policies-often on the grounds that such policies were cost-effective-even when doing so was more costly to the company. Policymakers should realize that the framing of incentive programs can convey tacit, and sometimes stigmatizing, messages.

Transport of Escherichia coli in 25 m quartz sand columns

NASA Astrophysics Data System (ADS)

Lutterodt, G.; Foppen, J. W. A.; Maksoud, A.; Uhlenbrook, S.

2011-01-01

To help improve the prediction of bacteria travel distances in aquifers laboratory experiments were conducted to measure the distant dependent sticking efficiencies of two low attaching Escherichia coli strains (UCFL-94 and UCFL-131). The experimental set up consisted of a 25 m long helical column with a diameter of 3.2 cm packed with 99.1% pure-quartz sand saturated with a solution of magnesium sulfate and calcium chloride. Bacteria mass breakthrough at sampling distances ranging from 6 to 25.65 m were observed to quantify bacteria attachment over total transport distances ( αL) and sticking efficiencies at large intra-column segments ( αi) (> 5 m). Fractions of cells retained ( Fi) in a column segment as a function of αi were fitted with a power-law distribution from which the minimum sticking efficiency defined as the sticking efficiency of 0.001% bacteria fraction of the total input mass retained that results in a 5 log removal were extrapolated. Low values of αL in the order 10 - 4 and 10 - 3 were obtained for UCFL-94 and UCFL-131 respectively, while αi-values ranged between 10 - 6 to 10 - 3 for UCFL-94 and 10 - 5 to 10 - 4 for UCFL-131. In addition, both αL and αi reduced with increasing transport distance, and high coefficients of determination (0.99) were obtained for power-law distributions of αi for the two strains. Minimum sticking efficiencies extrapolated were 10 - 7 and 10 - 8 for UCFL-94 and UCFL-131, respectively. Fractions of cells exiting the column were 0.19 and 0.87 for UCFL-94 and UCL-131, respectively. We concluded that environmentally realistic sticking efficiency values in the order of 10 - 4 and 10 - 3 and much lower sticking efficiencies in the order 10 - 5 are measurable in the laboratory, Also power-law distributions in sticking efficiencies commonly observed for limited intra-column distances (< 2 m) are applicable at large transport distances(> 6 m) in columns packed with quartz grains. High fractions of bacteria populations may possess the so-called minimum sticking efficiency, thus expressing their ability to be transported over distances longer than what might be predicted using measured sticking efficiencies from experiments with both short (< 1 m) and long columns (> 25 m). Also variable values of sticking efficiencies within and among the strains show heterogeneities possibly due to variations in cell surface characteristics of the strains. The low sticking efficiency values measured express the importance of the long columns used in the experiments and the lower values of extrapolated minimum sticking efficiencies makes the method a valuable tool in delineating protection areas in real-world scenarios.

Moxa-stick suffumigation for disinfecting air in hematology and hematopoietic stem cell transplantation wards with class 100 laminar flow.

PubMed

He, Jing-song; Yang, Qing; Huang, Wei-jia; Hu, Xiao-rong

2014-04-01

To evaluate the effect of moxa-stick suffumigation in the hematology and hematopoietic stem cell transplantation (HSCT) wards with luminar flow. The plate exposure method was used to measure the effect of air-disinfection of moxa-stick suffumigation in hematology and HSCT wards. The yearly average qualified rates of air sampling in HSCT wards were evaluated from 2007 to 2010. To further investigate the disinfecting effect of moxa-stick suffumigation, the colony counts of common pathogens (including Staphylcoccus aureus and Pseudomonas aeruginosa) before and after moxa-stick suffumigation were compared. The mean air quality rates of the HSCT wards with class 100 laminar flow were all above 90.0% (91.2%-96.2%) from 2007 to 2010. Moxa-stick suffumigation effectively decreased the presence of bacteria in the hematology ward's air (P<0.01). The most notable effect was the drastic reduction in the colony counts of Staphylococcus aureus and Pseudomonas aeruginosa on the blood plates exposed to air treated with moxa-stick suffumigation (77.1±52.9 cfu/m(2) vs 196.1±87.5 cfu/m(2), P<0.01; and 100.2±35.3 cfu/m(2) vs 371.5±35.3 cfu/m(2), P<0.01). Moxa-stick suffumigation proved to be a reliable and effective airdisinfection method for hematology and HSCT wards, and hence, it should be employed extensively.

A Comprehensive Study of Hydrogen Adsorbing to Amorphous Water ice: Defining Adsorption in Classical Molecular Dynamics

NASA Astrophysics Data System (ADS)

Dupuy, John L.; Lewis, Steven P.; Stancil, P. C.

2016-11-01

Gas-grain and gas-phase reactions dominate the formation of molecules in the interstellar medium (ISM). Gas-grain reactions require a substrate (e.g., a dust or ice grain) on which the reaction is able to occur. The formation of molecular hydrogen (H2) in the ISM is the prototypical example of a gas-grain reaction. In these reactions, an atom of hydrogen will strike a surface, stick to it, and diffuse across it. When it encounters another adsorbed hydrogen atom, the two can react to form molecular hydrogen and then be ejected from the surface by the energy released in the reaction. We perform in-depth classical molecular dynamics simulations of hydrogen atoms interacting with an amorphous water-ice surface. This study focuses on the first step in the formation process; the sticking of the hydrogen atom to the substrate. We find that careful attention must be paid in dealing with the ambiguities in defining a sticking event. The technical definition of a sticking event will affect the computed sticking probabilities and coefficients. Here, using our new definition of a sticking event, we report sticking probabilities and sticking coefficients for nine different incident kinetic energies of hydrogen atoms [5-400 K] across seven different temperatures of dust grains [10-70 K]. We find that probabilities and coefficients vary both as a function of grain temperature and incident kinetic energy over the range of 0.99-0.22.

Whole genome sequencing of Rhodotorula mucilaginosa isolated from the chewing stick (Distemonanthus benthamianus): insights into Rhodotorula phylogeny, mitogenome dynamics and carotenoid biosynthesis.

PubMed

Gan, Han Ming; Thomas, Bolaji N; Cavanaugh, Nicole T; Morales, Grace H; Mayers, Ashley N; Savka, Michael A; Hudson, André O

2017-01-01

In industry, the yeast Rhodotorula mucilaginosa is commonly used for the production of carotenoids. The production of carotenoids is important because they are used as natural colorants in food and some carotenoids are precursors of retinol (vitamin A). However, the identification and molecular characterization of the carotenoid pathway/s in species belonging to the genus Rhodotorula is scarce due to the lack of genomic information thus potentially impeding effective metabolic engineering of these yeast strains for improved carotenoid production. In this study, we report the isolation, identification, characterization and the whole nuclear genome and mitogenome sequence of the endophyte R. mucilaginosa RIT389 isolated from Distemonanthus benthamianus, a plant known for its anti-fungal and antibacterial properties and commonly used as chewing sticks. The assembled genome of R. mucilaginosa RIT389 is 19 Mbp in length with an estimated genomic heterozygosity of 9.29%. Whole genome phylogeny supports the species designation of strain RIT389 within the genus in addition to supporting the monophyly of the currently sequenced Rhodotorula species. Further, we report for the first time, the recovery of the complete mitochondrial genome of R. mucilaginosa using the genome skimming approach. The assembled mitogenome is at least 7,000 bases larger than that of Rhodotorula taiwanensis which is largely attributed to the presence of large intronic regions containing open reading frames coding for homing endonuclease from the LAGLIDADG and GIY-YIG families. Furthermore, genomic regions containing the key genes for carotenoid production were identified in R. mucilaginosa RIT389, revealing differences in gene synteny that may play a role in the regulation of the biotechnologically important carotenoid synthesis pathways in yeasts.

Whole genome sequencing of Rhodotorula mucilaginosa isolated from the chewing stick (Distemonanthus benthamianus): insights into Rhodotorula phylogeny, mitogenome dynamics and carotenoid biosynthesis

PubMed Central

Thomas, Bolaji N.; Cavanaugh, Nicole T.; Morales, Grace H.; Mayers, Ashley N.; Savka, Michael A.

2017-01-01

In industry, the yeast Rhodotorula mucilaginosa is commonly used for the production of carotenoids. The production of carotenoids is important because they are used as natural colorants in food and some carotenoids are precursors of retinol (vitamin A). However, the identification and molecular characterization of the carotenoid pathway/s in species belonging to the genus Rhodotorula is scarce due to the lack of genomic information thus potentially impeding effective metabolic engineering of these yeast strains for improved carotenoid production. In this study, we report the isolation, identification, characterization and the whole nuclear genome and mitogenome sequence of the endophyte R. mucilaginosa RIT389 isolated from Distemonanthus benthamianus, a plant known for its anti-fungal and antibacterial properties and commonly used as chewing sticks. The assembled genome of R. mucilaginosa RIT389 is 19 Mbp in length with an estimated genomic heterozygosity of 9.29%. Whole genome phylogeny supports the species designation of strain RIT389 within the genus in addition to supporting the monophyly of the currently sequenced Rhodotorula species. Further, we report for the first time, the recovery of the complete mitochondrial genome of R. mucilaginosa using the genome skimming approach. The assembled mitogenome is at least 7,000 bases larger than that of Rhodotorula taiwanensis which is largely attributed to the presence of large intronic regions containing open reading frames coding for homing endonuclease from the LAGLIDADG and GIY-YIG families. Furthermore, genomic regions containing the key genes for carotenoid production were identified in R. mucilaginosa RIT389, revealing differences in gene synteny that may play a role in the regulation of the biotechnologically important carotenoid synthesis pathways in yeasts. PMID:29158974

Improving Classroom Behavior: The Carrot and the Stick.

ERIC Educational Resources Information Center

Talent, Barbara K.; Busch, Suzanne G.

A set of practical behavior change techniques for improving young children's classroom behavior are briefly discussed. Techniques are classified and discussed under two general categories: those that reduce frequency of behaviors ("sticks") and those that increase their frequency ("carrots"). Included under "sticks" are techniques such as ignoring…

Manual accidents, biological risk control, and quality indicators at a children's hospital in north-east Italy.

PubMed

Parco, Sergio; Vascotto, Fulvia; Simeone, Roberto; Visconti, Patrizia

2015-01-01

Working in health care carries the risk of transmission of infected blood to patients by hospital workers and to other health personnel in the form of occupational infections. Conscientious application of the standard precautions is the main method used to avoid needle stick injuries, contamination of skin and mucous membranes, cuts with sharp tools, and inadequate disposal and recapping of needles. The aim of this work was to investigate in Friuli Venezia Giulia, a region in north-east Italy, the enhancement carried out to prevent situations of biologic risk for health care workers, and to verify the related laboratory analyses. Biological accidents occurring during the years 2012-2013 in the departments of oncology and pediatric-obstetric surgery, and in the intensive care unit at Burlo Garofolo Children's Hospital in Trieste (a large town in Friuli Venezia Giulia) were reviewed, and a new panel of tests was introduced for patients and health care workers, to also detect human immunodeficiency virus (HIV), hepatitis C virus (HCV), hepatitis B virus (HBV), and aspartate transaminase and immunoglobulin G. All tests were submitted for external quality assessment. In total, 230 nosocomial events were reported by health care workers in the above-mentioned hospital departments in 2012-2013. There were 158 accidents in 2012, including 55 accidental needle stick injuries (34.81%), 59 blood splashes (37.34%), and 44 cuts with infected instruments (27.84%). The risk of sustaining a cut was related to movement error during surgery when the appropriate procedure was not followed or when devices were being assembled and passed between doctors and nurses. Most accidents happened among physicians compared to nurses; the high percentage of needle stick injuries (34.81%) versus nurses (25.94%) were due to incorrect recapping of needles after use. No cases of health care workers being infected with HCV, HBV, or HIV were identified. In 2013, the number of biological accidents decreased to 61, comprising two needle stick injuries (3.27%), 35 blood splashes (57.37%), and 25 cuts with contaminated instruments (40.98%). The number of subcutaneous abscesses with scarring resulting from cuts with sharp instruments decreased from three in 2012 (one of which was the subject of medicolegal proceedings) to none in 2013. Although our study population was relatively small, we did detect a statistically significant decrease in the number of needle stick injuries (P<0.05, χ(2) test). In this early experience at a maternal and child health institution in the Friuli Venezia Giulia region, application of a safety protocol, centralized organization of HIV tests, improved external quality assessment, and introduction of internal quality control for immunoglobulin G contributed to a decrease in the number of work-related biological accidents and their complications, which have the potential to result in medicolegal problems.

Low-pressure oxidation of Cb-1Zr alloy.

NASA Technical Reports Server (NTRS)

Lyon, T. F.

1971-01-01

Resistively heated strip specimens of Cb-1Zr alloy were exposed at 927 C in a vacuum chamber at various levels of total pressure in the 1-microtorr range and at various oxygen partial pressures in the .1-microtorr range. Oxygen reaction rates (sticking probabilities) were found to depend on whether or not the specimens were annealed immediately before the test exposure. It is shown that a normally undetectable oxide film exists on the Cb-1Zr surface as a result of oxidation by ambient air, and this film reduces the sticking probability as compared with a clean metal surface. The alloy is considerably strengthened by addition of oxygen to a level of about 6000 ppm, while still maintaining reasonably good room temperature ductility.

Note: Versatile sample stick for neutron scattering experiments in high electric fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartkowiak, M., E-mail: marek.bartkowiak@psi.ch; White, J. S.; Laboratory for Quantum Magnetism, Ecole Polytechnique Fédérale de Lausanne

2014-02-15

We present a versatile high voltage sample stick that fits into all cryomagnets and standard cryostats at the Swiss Spallation Neutron Source, Paul Scherrer Institut, and which provides a low effort route to neutron scattering experiments that combine electric field with low temperature and magnetic field. The stick allows for voltages up to 5 kV and can be easily adapted for different scattering geometries. We discuss the design consideration and thermal behavior of the stick, and give one example to showcase the abilities of the device.

Methods and apparatus to produce stick-slip motion of logging tool attached to a wireline drawn upward by a continuously rotating wireline drum

DOEpatents

Vail, III, William Banning; Momii, Steven Thomas

1998-01-01

Methods and apparatus are described to produce stick-slip motion of a logging tool within a cased well attached to a wireline that is drawn upward by a continuously rotating wireline drum. The stick-slip motion results in the periodic upward movement of the tool in the cased well described in terms of a dwell time during which time the tool is stationary, the move time during which time the tool moves, and the stroke that is upward distance that the tool translates during the "slip" portion of the stick-slip motion. This method of measurement is used to log the well at different vertical positions of the tool. Therefore, any typical "station-to-station logging tool" may be modified to be a "continuous logging tool", where "continuous" means that the wireline drum continually rotates while the tool undergoes stick-slip motion downhole and measurements are performed during the dwell times when the tool is momentarily stationary. The stick-slip methods of operation and the related apparatus are particularly described in terms of making measurements of formation resistivity from within a cased well during the dwell times when the tool is momentarily stationary during the periodic stick-slip motion of the logging tool.

Methods and apparatus to produce stick-slip motion of logging tool attached to a wireline drawn upward by a continuously rotating wireline drum

DOEpatents

Vail, W.B. III; Momii, S.T.

1998-02-10

Methods and apparatus are described to produce stick-slip motion of a logging tool within a cased well attached to a wireline that is drawn upward by a continuously rotating wireline drum. The stick-slip motion results in the periodic upward movement of the tool in the cased well described in terms of a dwell time during which time the tool is stationary, the move time during which time the tool moves, and the stroke that is upward distance that the tool translates during the ``slip`` portion of the stick-slip motion. This method of measurement is used to log the well at different vertical positions of the tool. Therefore, any typical ``station-to-station logging tool`` may be modified to be a ``continuous logging tool,`` where ``continuous`` means that the wireline drum continually rotates while the tool undergoes stick-slip motion downhole and measurements are performed during the dwell times when the tool is momentarily stationary. The stick-slip methods of operation and the related apparatus are particularly described in terms of making measurements of formation resistivity from within a cased well during the dwell times when the tool is momentarily stationary during the periodic stick-slip motion of the logging tool. 12 figs.

Creep to inertia dominated stick-slip behavior in sliding friction modulated by tilted non-uniform loading

NASA Astrophysics Data System (ADS)

Tian, Pengyi; Tao, Dashuai; Yin, Wei; Zhang, Xiangjun; Meng, Yonggang; Tian, Yu

2016-09-01

Comprehension of stick-slip motion is very important for understanding tribological principles. The transition from creep-dominated to inertia-dominated stick-slip as the increase of sliding velocity has been described by researchers. However, the associated micro-contact behavior during this transition has not been fully disclosed yet. In this study, we investigated the stick-slip behaviors of two polymethyl methacrylate blocks actively modulated from the creep-dominated to inertia-dominated dynamics through a non-uniform loading along the interface by slightly tilting the angle of the two blocks. Increasing the tilt angle increases the critical transition velocity from creep-dominated to inertia-dominated stick-slip behaviors. Results from finite element simulation disclosed that a positive tilt angle led to a higher normal stress and a higher temperature on blocks at the opposite side of the crack initiating edge, which enhanced the creep of asperities during sliding friction. Acoustic emission (AE) during the stick-slip has also been measured, which is closely related to the different rupture modes regulated by the distribution of the ratio of shear to normal stress along the sliding interface. This study provided a more comprehensive understanding of the effect of tilted non-uniform loading on the local stress ratio, the local temperature, and the stick-slip behaviors.

A novel tool for the prediction of tablet sticking during high speed compaction.

PubMed

Abdel-Hamid, Sameh; Betz, Gabriele

2012-01-01

During tableting, capping is a problem of cohesion while sticking is a problem of adhesion. Sticking is a multi-composite problem; causes are either material or machine related. Nowadays, detecting such a problem is a pre-requisite in the early stages of development. The aim of our study was to investigate sticking by radial die-wall pressure monitoring guided by compaction simulation. This was done by using the highly sticking drug; Mefenamic acid (MA) at different drug loadings with different fillers compacted at different pressures and speeds. By increasing MA loading, we found that viscoelastic fillers showed high residual radial pressure after compaction while plastic/brittle fillers showed high radial pressure during compaction, p < 0.05. Visually, plastic/brittle fillers showed greater tendencies for adhesion to punches than viscoelastic fillers while the later showed higher tendencies for adhesion to the die-wall. This was confirmed by higher values of axial stress transmission for plastic/brittle than viscoelastic fillers (higher punch surface/powder interaction), and higher residual die-wall and ejection forces for viscoelastic than plastic/brittle fillers, p < 0.05. Take-off force was not a useful tool to estimate sticking due to cohesive failure of the compacts. Radial die-wall pressure monitoring is suggested as a robust tool to predict sticking.

Creep to inertia dominated stick-slip behavior in sliding friction modulated by tilted non-uniform loading.

PubMed

Tian, Pengyi; Tao, Dashuai; Yin, Wei; Zhang, Xiangjun; Meng, Yonggang; Tian, Yu

2016-09-19

Comprehension of stick-slip motion is very important for understanding tribological principles. The transition from creep-dominated to inertia-dominated stick-slip as the increase of sliding velocity has been described by researchers. However, the associated micro-contact behavior during this transition has not been fully disclosed yet. In this study, we investigated the stick-slip behaviors of two polymethyl methacrylate blocks actively modulated from the creep-dominated to inertia-dominated dynamics through a non-uniform loading along the interface by slightly tilting the angle of the two blocks. Increasing the tilt angle increases the critical transition velocity from creep-dominated to inertia-dominated stick-slip behaviors. Results from finite element simulation disclosed that a positive tilt angle led to a higher normal stress and a higher temperature on blocks at the opposite side of the crack initiating edge, which enhanced the creep of asperities during sliding friction. Acoustic emission (AE) during the stick-slip has also been measured, which is closely related to the different rupture modes regulated by the distribution of the ratio of shear to normal stress along the sliding interface. This study provided a more comprehensive understanding of the effect of tilted non-uniform loading on the local stress ratio, the local temperature, and the stick-slip behaviors.

Creep to inertia dominated stick-slip behavior in sliding friction modulated by tilted non-uniform loading

PubMed Central

Tian, Pengyi; Tao, Dashuai; Yin, Wei; Zhang, Xiangjun; Meng, Yonggang; Tian, Yu

2016-01-01

Comprehension of stick-slip motion is very important for understanding tribological principles. The transition from creep-dominated to inertia-dominated stick-slip as the increase of sliding velocity has been described by researchers. However, the associated micro-contact behavior during this transition has not been fully disclosed yet. In this study, we investigated the stick-slip behaviors of two polymethyl methacrylate blocks actively modulated from the creep-dominated to inertia-dominated dynamics through a non-uniform loading along the interface by slightly tilting the angle of the two blocks. Increasing the tilt angle increases the critical transition velocity from creep-dominated to inertia-dominated stick-slip behaviors. Results from finite element simulation disclosed that a positive tilt angle led to a higher normal stress and a higher temperature on blocks at the opposite side of the crack initiating edge, which enhanced the creep of asperities during sliding friction. Acoustic emission (AE) during the stick-slip has also been measured, which is closely related to the different rupture modes regulated by the distribution of the ratio of shear to normal stress along the sliding interface. This study provided a more comprehensive understanding of the effect of tilted non-uniform loading on the local stress ratio, the local temperature, and the stick-slip behaviors. PMID:27641908

The Sticking Point in the Bench Press, the Squat, and the Deadlift: Similarities and Differences, and Their Significance for Research and Practice.

PubMed

Kompf, Justin; Arandjelović, Ognjen

2017-04-01

Since it was first observed, and especially so in recent years, the phenomenon of the so-called "sticking point" in resistance training has attracted a substantial amount of sports and exercise science research. Broadly speaking, the sticking point is understood as the position in the range of motion of a lift at which a disproportionately large increase in the difficulty associated with continuing the lift is experienced. Hence the sticking point is inherently the performance bottleneck, and is also associated with an increased chance of exercise form deterioration or breakdown. Understanding the aspects of lifting performance which should be analysed in order to pinpoint the cause of a specific sticking point and therefore devise an effective training strategy to overcome it is of pervasive importance to strength practitioners, and is conducive to injury avoidance and continued progress. In this paper, we survey a range of physiological and biomechanical mechanisms which contribute to the development of sticking points, and then, led by this insight, review and analyse the findings of the existing observational research on the occurrence of sticking points in three ubiquitous exercises: the bench press, the squat, and the deadlift. The findings of our analysis should be used to inform future research and current resistance training practice.

Radiative corrections to quantum sticking on graphene

NASA Astrophysics Data System (ADS)

Sengupta, Sanghita; Clougherty, Dennis P.

2017-07-01

We study the sticking rate of atomic hydrogen to suspended graphene using four different methods that include contributions from processes with multiphonon emission. We compare the numerical results of the sticking rate obtained by: (i) the loop expansion of the atom self-energy; (ii) the noncrossing approximation (NCA); (iii) the independent boson model approximation (IBMA); and (iv) a leading-order soft-phonon resummation method (SPR). The loop expansion reveals an infrared problem, analogous to the infamous infrared problem in QED. The two-loop contribution to the sticking rate gives a result that tends to diverge for large membranes. The latter three methods remedy this infrared problem and give results that are finite in the limit of an infinite membrane. We find that for micromembranes (sizes ranging 100 nm to 10 μ m ), the latter three methods give results that are in good agreement with each other and yield sticking rates that are mildly suppressed relative to the lowest-order golden rule rate. Lastly, we find that the SPR sticking rate decreases slowly to zero with increasing membrane size, while both the NCA and IBMA rates tend to a nonzero constant in this limit. Thus, approximations to the sticking rate can be sensitive to the effects of soft-phonon emission for large membranes.

Investigation of PDC bit failure base on stick-slip vibration analysis of drilling string system plus drill bit

NASA Astrophysics Data System (ADS)

Huang, Zhiqiang; Xie, Dou; Xie, Bing; Zhang, Wenlin; Zhang, Fuxiao; He, Lei

2018-03-01

The undesired stick-slip vibration is the main source of PDC bit failure, such as tooth fracture and tooth loss. So, the study of PDC bit failure base on stick-slip vibration analysis is crucial to prolonging the service life of PDC bit and improving ROP (rate of penetration). For this purpose, a piecewise-smooth torsional model with 4-DOF (degree of freedom) of drilling string system plus PDC bit is proposed to simulate non-impact drilling. In this model, both the friction and cutting behaviors of PDC bit are innovatively introduced. The results reveal that PDC bit is easier to fail than other drilling tools due to the severer stick-slip vibration. Moreover, reducing WOB (weight on bit) and improving driving torque can effectively mitigate the stick-slip vibration of PDC bit. Therefore, PDC bit failure can be alleviated by optimizing drilling parameters. In addition, a new 4-DOF torsional model is established to simulate torsional impact drilling and the effect of torsional impact on PDC bit's stick-slip vibration is analyzed by use of an engineering example. It can be concluded that torsional impact can mitigate stick-slip vibration, prolonging the service life of PDC bit and improving drilling efficiency, which is consistent with the field experiment results.

Influence of sticking vs non-sticking limits of moment of inertia and higher order deformations in the decay of 214,216Rn* compound systems

NASA Astrophysics Data System (ADS)

Mittal, Rajni; Jain, Deepika; Sharma, Manoj K.

2017-12-01

The dynamical cluster decay model (DCM) is employed to explore the relative effect of sticking (IS) and non-sticking (INS) limits of moment of inertia (MOI) in the decay of hot and rotating 214,216Rn* compound nuclei, formed in 16,18O + 198Pt reactions. Beside this, the nuclear deformation effects i.e. quadrupole β2 (static and dynamic) and higher order static deformations up to hexadecapole (β4) are duly incorporated and studied within DCM. The influence of both 'INS/IS' addressing rotational energy component and 'deformations' is gauged through the barrier characteristics, preformation factor and barrier lowering effects. The experimentally given ER and ff data is addressed by optimizing the neck-length ΔR, that strongly depends on the limiting angular momentum, which in turn depends on the sticking or non-sticking limits of interaction. In addition to this, the influence of increase in energy and neutron number is probed in reference to ER survival probability of Rn compound nucleus. Finally, the ff cross-sections of 214,216Rn* nuclei are predicted within sticking limit of moment of inertia as the same seems to be more suitable for such decay paths.

Effects of diversity in olfactory environment on children's sense of smell.

PubMed

Martinec Nováková, Lenka; Fialová, Jitka; Havlíček, Jan

2018-02-13

Diversity in children's everyday olfactory environment may affect the development of their olfactory abilities and odor awareness. To test this, we collected data on olfactory abilities using the Sniffin' Sticks and odor awareness with Children's Olfactory Behaviors in Everyday Life Questionnaire in 153 preschool children and retested them one and a half year later. Parents completed an inventory on children's exposure to a variety of odors and on their own odor awareness using the Odor Awareness Scale. We controlled for the effects of age and verbal fluency on the children's performance. We found that the children's odor identification and discrimination scores differed as a function of parental odor awareness. Although these effects were rather small, they were commensurate in size with those of gender and age. To the best of our knowledge, this study is the first to present evidence that diversity in children's olfactory environment affects variation in their olfactory abilities and odor awareness. We suggest that future studies consider the long-term impact of perceptual learning out of the laboratory and its consequences for olfactory development.

Markov state modeling of sliding friction

NASA Astrophysics Data System (ADS)

Pellegrini, F.; Landes, François P.; Laio, A.; Prestipino, S.; Tosatti, E.

2016-11-01

Markov state modeling (MSM) has recently emerged as one of the key techniques for the discovery of collective variables and the analysis of rare events in molecular simulations. In particular in biochemistry this approach is successfully exploited to find the metastable states of complex systems and their evolution in thermal equilibrium, including rare events, such as a protein undergoing folding. The physics of sliding friction and its atomistic simulations under external forces constitute a nonequilibrium field where relevant variables are in principle unknown and where a proper theory describing violent and rare events such as stick slip is still lacking. Here we show that MSM can be extended to the study of nonequilibrium phenomena and in particular friction. The approach is benchmarked on the Frenkel-Kontorova model, used here as a test system whose properties are well established. We demonstrate that the method allows the least prejudiced identification of a minimal basis of natural microscopic variables necessary for the description of the forced dynamics of sliding, through their probabilistic evolution. The steps necessary for the application to realistic frictional systems are highlighted.

Effects of skin-to-skin contact on autonomic pain responses in preterm infants.

PubMed

Cong, Xiaomei; Cusson, Regina M; Walsh, Stephen; Hussain, Naveed; Ludington-Hoe, Susan M; Zhang, Di

2012-07-01

The purpose of this randomized crossover trial was to determine the effects on autonomic responses in preterm infants of longer Kangaroo Care (30 minutes, KC30) and shorter KC (15 minutes, KC15) before and throughout heel stick compared with incubator care (IC). Beat-to-beat heart rate (HR) and spectral power analysis of heart rate variability, low frequency power (LF), high frequency power (HF), and LF/HF ratio were measured in 26 infants. HR changes from Baseline to Heel Stick were significantly less in KC30 and KC15 than in IC, and more infants had HR decrease in IC than in 2 KC conditions. In IC, LF and HF significantly increased from Baseline to Heel Stick and dropped from Heel Stick to Recovery; in 2 KC conditions, no changes across study phases were found. During Heel Stick, LF and HF were significantly higher in IC than in KC30. In all 3 conditions, LF/HF ratio decreased from Baseline to Heel Stick and increased to Recovery; no differences were found between IC and two KC conditions. Both longer and shorter KC before and throughout heel stick can stabilize HR response in preterm infants, and longer KC significantly affected infants' sympathetic and parasympathetic responses during heel stick compared with incubator care. This study showed that KC has a significant effect on reducing autonomic pain responses in preterm infants. The findings support that KC is a safe and effective pain intervention in the neonatal intensive care unit. Copyright © 2012 American Pain Society. Published by Elsevier Inc. All rights reserved.

Prior leg massage decreases pain responses to heel stick in preterm babies.

PubMed

Jain, Sunil; Kumar, Praveen; McMillan, Douglas D

2006-09-01

Leg massage could inhibit the transmission of pain by 'closing the gate' or by activating the endogenous opioid pathway to decrease nociceptive transmission of pain associated with heel stick. The aim of this study is to determine the effects of massage therapy prior to heel stick on responses assessed by the Neonatal Infant Pain Scale (NIPS) (primary outcome), heart rate, respiratory rate and oxygen saturation (secondary outcomes) in infants who required a heel stick for blood sampling. This randomised, double-blind, crossover trial with infants from 1 to 7 days post birth excluded those with prior surgery, septicaemia, current assisted ventilation or an analgesic within 48 h. After informed consent, 13 infants received a 2-min massage of the ipsilateral leg prior to heel stick on the first study sampling and no massage on the next sampling 2-7 days later and 10 infants had the reverse order. The bedside nurse, blinded to the intervention, measured NIPS, heart rate, respiratory rate, and oxygen saturation prior to massage, after massage, and 5 min after heel stick. Serum cortisol was measured with the blood sampling. In 23 infants (birthweight 795-2507 g), there were no adverse physiologic effects of massage. After heel stick, NIPS (P < 0.001) and heart rate (P = 0.03) were increased in the no-massage group compared with the massage group. Respiratory rate, oxygen saturation and serum cortisol were not significantly different. Gentle massage of the leg prior to heel stick is safe and decreases pain responses in preterm infants.

Analysis of Handling Qualities Design Criteria for Active Inceptor Force-Feel Characteristics

NASA Technical Reports Server (NTRS)

Malpica, Carlos A.; Lusardi, Jeff A.

2013-01-01

The force-feel system characteristics of the cyclic inceptors of most helicopters are set based on the characteristics of the mechanical components in the control system (mass, springs, friction dampers, etc.). For these helicopters, the force-feel characteristics typically remain constant over the entire flight envelope, with perhaps a trim release to minimize control forces while maneuvering. With the advent of fly-by-wire control systems and active inceptors in helicopters, the force-feel characteristics are now determined by the closed-loop response of the active inceptor itself as defined by the inertia, force/displacement gradient, damping, breakout force and detent shape configuration parameters in the inceptor control laws. These systems give the flexibility to dynamically prescribe different feel characteristics for different control modes or flight conditions, and the ability to provide tactile cueing to the pilot through the actively controlled side-stick or center-stick cyclic inceptor. For rotorcraft, a few studies have been conducted to assess the effects of cyclic force-feel characteristics on handling qualities in flight. An early study provided valuable insight into the static force-deflection characteristics (force gradient) and the number of axes controlled by the side-stick controller for the U.S. Army's Advanced Digital/Optical Control System (ADOCS) demonstrator aircraft [1]. The first of a series of studies providing insight on the inceptor dynamic force-feel characteristics was conducted on the NASA/Army CH-47B variable-stability helicopter [2]. This work led to a proposed requirement that set boundaries based on the cyclic natural frequency and inertia, with the stipulation of a lower damping ratio limit of 0.3 [3]. A second study was conducted by the Canadian Institute for Aerospace Research using their variable-stability Bell 205A helicopter [4]. This research suggested boundaries for stick dynamics based on natural frequency and damping ratio. While these two studies produced boundaries for acceptable/unacceptable stick dynamics for rotorcraft, they were not able to provide guidance on how variations of the stick dynamics in the acceptable region impact handling qualities. More recently, a ground based simulation study [5] suggested little benefit was to be obtained from variations of the damping ratio for a side-stick controller exhibiting high natural frequencies (greater than 17 rad/s) and damping ratios (greater than 2.0). A flight test campaign was conducted concurrently on the RASCAL JUH-60A in-flight simulator and the ACT/FHS EC-135 in flight simulator [6]. Upon detailed analysis of the pilot evaluations the study identified a clear preference for a high damping ratio and natural frequency of the center stick inceptors. Side stick controllers were found to be less sensitive to the damping. While these studies have compiled a substantial amount of data, in the form of qualitative and quantitative pilot opinion, a fundamental analysis of the effect of the inceptor force-feel system on flight control is found to be lacking. The study of Ref. [6] specifically concluded that a systematic analysis was necessary, since discrepancies with the assigned handling qualities showed that proposed analytical design metrics, or criteria, were not suitable. The overall goal of the present study is to develop a clearer fundamental understanding of the underlying mechanisms associated with the inceptor dynamics that govern the handling qualities using a manageable analytical methodology.

Glow Sticks: Spectra and Color Mixing

ERIC Educational Resources Information Center

Birriel, Jennifer; Birriel, Ignacio

2014-01-01

Glow sticks are a popular Halloween staple familiar to most of our students. The production of light via a chemical reaction is called "chemiluminescence," and glow sticks are often used as demonstrations and experiments in the chemistry classroom to study reaction rates as a function of temperature. A black light can be used to…

A fundamental approach to the sticking of insect residues to aircraft wings

NASA Technical Reports Server (NTRS)

Yi, O.; Eiss, N. S.; Wightman, J. P.

1988-01-01

The aircraft industry is concerned with the increase of drag on planes due to the sticking of insects on critical airfoil areas. The objectives of the present study were to investigate the effects of surface energy and elasticity on the number of insects sticking onto the polymer coatings on a modified aircraft wing and to determine the mechanism by which insects stick onto surfaces during high velocity impact. Analyses including scanning electron microscopy, electron spectroscopy for chemical analysis and contact angle measurements of uncoated and polymer coated aluminum surfaces were performed. A direct relation between the number of insects sticking on a sample and its surface energy was obtained. Since the sticky liquid from a burst open insect will not spread on the low energy surface, it will ball up providing poor adhesion between the insect debris and the surface. The incoming air flow can easily blow off the insect debris and thus reducing the number of insects that remain stuck on the surface. Also a direct relation between the number of insect sticking onto a surface and their modulus of elasticity was obtained.

Low-Profile, Dual-Wavelength, Dual-Polarized Antenna

NASA Technical Reports Server (NTRS)

Carswell, James R.

2010-01-01

A single-aperture, low-profile antenna design has been developed that supports dual-polarization and simultaneous operation at two wavelengths. It realizes multiple beams in the elevation plane, and supports radiometric, radar, and conical scanning applications. This antenna consists of multiple azimuth sticks, with each stick being a multilayer, hybrid design. Each stick forms the h-plane pattern of the C and Ku-band vertically and horizontally polarized antenna beams. By combining several azimuth sticks together, the elevation beam is formed. With a separate transceiver for each stick, the transmit phase and amplitude of each stick can be controlled to synthesize a beam at a specific incidence angle and to realize a particular side-lobe pattern. By changing the transmit phase distribution through the transceivers, the transmit antenna beam can be steered to different incidence angles. By controlling the amplitude distribution, different side lobe patterns and efficiencies can be realized. The receive beams are formed using digital beam synthesis techniques, resulting in very little loss in the receive path, thus enabling a very-low loss receive antenna to support passive measurements.

Adhesive interactions of geckos with wet and dry fluoropolymer substrates

PubMed Central

Stark, Alyssa Y.; Dryden, Daniel M.; Olderman, Jeffrey; Peterson, Kelly A.; Niewiarowski, Peter H.; French, Roger H.; Dhinojwala, Ali

2015-01-01

Fluorinated substrates like Teflon® (poly(tetrafluoroethylene); PTFE) are well known for their role in creating non-stick surfaces. We showed previously that even geckos, which can stick to most surfaces under a wide variety of conditions, slip on PTFE. Surprisingly, however, geckos can stick reasonably well to PTFE if it is wet. In an effort to explain this effect, we have turned our attention to the role of substrate surface energy and roughness when shear adhesion occurs in media other than air. In this study, we removed the roughness component inherent to commercially available PTFE and tested geckos on relatively smooth wet and dry fluoropolymer substrates. We found that roughness had very little effect on shear adhesion in air or in water and that the level of fluorination was most important for shear adhesion, particularly in air. Surface energy calculations of the two fluorinated substrates and one control substrate using the Tabor–Winterton approximation and the Young–Dupré equation were used to determine the interfacial energy of the substrates. Using these interfacial energies we estimated the ratio of wet and dry normal adhesion for geckos clinging to the three substrates. Consistent with the results for rough PTFE, our predictions show a qualitative trend in shear adhesion based on fluorination, and the quantitative experimental differences highlight the unusually low shear adhesion of geckos on dry smooth fluorinated substrates, which is not captured by surface energy calculations. Our work has implications for bioinspired design of synthetics that can preferentially stick in water but not in air. PMID:26109635

Poromechanics of stick-slip frictional sliding and strength recovery on tectonic faults

DOE PAGES

Scuderi, Marco M.; Carpenter, Brett M.; Johnson, Paul A.; ...

2015-10-22

Pore fluids influence many aspects of tectonic faulting including frictional strength aseismic creep and effective stress during the seismic cycle. But, the role of pore fluid pressure during earthquake nucleation and dynamic rupture remains poorly understood. Here we report on the evolution of pore fluid pressure and porosity during laboratory stick-slip events as an analog for the seismic cycle. We sheared layers of simulated fault gouge consisting of glass beads in a double-direct shear configuration under true triaxial stresses using drained and undrained fluid conditions and effective normal stress of 5–10 MPa. Shear stress was applied via a constant displacementmore » rate, which we varied in velocity step tests from 0.1 to 30 µm/s. Here, we observe net pore pressure increases, or compaction, during dynamic failure and pore pressure decreases, or dilation, during the interseismic period, depending on fluid boundary conditions. In some cases, a brief period of dilation is attendant with the onset of dynamic stick slip. Our data show that time-dependent strengthening and dynamic stress drop increase with effective normal stress and vary with fluid conditions. For undrained conditions, dilation and preseismic slip are directly related to pore fluid depressurization; they increase with effective normal stress and recurrence time. Microstructural observations confirm the role of water-activated contact growth and shear-driven elastoplastic processes at grain junctions. These results indicate that physicochemical processes acting at grain junctions together with fluid pressure changes dictate stick-slip stress drop and interseismic creep rates and thus play a key role in earthquake nucleation and rupture propagation.« less

Fracture of fiber-reinforced composites analyzed via acoustic emission.

PubMed

Ereifej, Nadia S; Oweis, Yara G; Altarawneh, Sandra K

2015-01-01

This study investigated the fracture resistance of composite resins using a three-point bending test and acoustic emission (AE) analysis. Three groups of specimens (n=15) were prepared: non-reinforced BelleGlass HP composite (NRC), unidirectional (UFRC) and multidirectional (MFRC) fiber-reinforced groups which respectively incorporated unidirectional Stick and multidirectional StickNet fibers. Specimens were loaded to failure in a universal testing machine while an AE system was used to detect audible signals. Initial fracture strengths and AE amplitudes were significantly lower than those at final fracture in all groups (p<0.05). Initial fracture strength of UFRC (170.0 MPa) was significantly higher than MFRC (124.6 MPa) and NRC (87.9 MPa). Final fracture strength of UFRC (198.1 MPa) was also significantly higher than MFRC (151.0 MPa) and NRC (109.2 MPa). Initial and final fracture strengths were significantly correlated (r=0.971). It was concluded that fiber reinforcement improved the fracture resistance of composite resin materials and the monitoring of acoustic signals revealed significant information regarding the fracture process.

Olfactory Cleft Endoscopy Scale correlates with olfactory metrics in patients with chronic rhinosinusitis

PubMed Central

Soler, Zachary M.; Hyer, J. Madison; Karnezis, Tom T.; Schlosser, Rodney J.

2015-01-01

Introduction Olfactory loss affects a majority of patients with chronic rhinosinusitis (CRS). Traditional objective measures of disease severity, including endoscopy scales, focus upon the paranasal sinuses and often have weak correlation to olfaction. Methods Adults with CRS were prospectively evaluated by blinded reviewers with a novel Olfactory Cleft Endoscopy Scale (OCES) that evaluated discharge, polyps, edema, crusting and scarring of the olfactory cleft. Objective olfactory function was assessed using “Sniffin’ Sticks testing, including composite threshold-discrimination-identification (TDI) scores. Olfactory-specific quality-of-life was evaluated using the short modified version of the Questionnaire of Olfactory Disorders (QOD-NS). Inter- and intra-rater reliability was assessed among 3 reviewers for OCES grading. Multivariate linear regression was then used to test associations between OCES scores and measures of olfaction, controlling for potential confounding factors. Results The OCES score was evaluated in 38 patients and had a high overall reliability (ICC=0.92; 95% CI: 0.91–0.96). The OCES significantly correlated with objective olfaction as measured by TDI score (p<0.001), with TDI score falling by 1.13 points for every 1 point increase in OCES score. Similar significant associations were found for threshold, discrimination, and identification scores (p<0.003 for all) after controlling for age, gender, race, and reviewer/review. The OCES was also highly associated with patient-reported QOD-NS scores (p=0.009). Conclusion A novel olfactory cleft endoscopy scale shows high reliability and correlates with both objective and patient-reported olfaction in patients with CRS. Further studies to determine prognostic value and responsiveness to change are warranted. PMID:26718315

Self-spreading of the wetting ridge during stick-slip on a viscoelastic surface

DOE PAGES

Park, S. J.; Bostwick, J. B.; De Andrade, V.; ...

2017-10-23

Dynamic wetting behaviors on soft solids are important to interpret complex biological processes from cell–substrate interactions. Despite intensive research studies over the past half-century, the underlying mechanisms of spreading behaviors are not clearly understood. The most interesting feature of wetting on soft matter is the formation of a “wetting ridge”, a surface deformation by a competition between elasticity and capillarity. Dynamics of the wetting ridge formed at the three-phase contact line underlies the dynamic wetting behaviors, but remains largely unexplored mostly due to limitations in indirect observation. Here, we directly visualize wetting ridge dynamics during continuous- and stick-slip motions onmore » a viscoelastic surface using X-ray microscopy. Strikingly, we discover that the ridge spreads spontaneously during stick and triggers contact line depinning (stick-to-slip transition) by changing the ridge geometry which weakens the contact line pinning. Finally, we clarify ‘viscoelastic-braking’, ‘stick-slipping’, and ‘stick-breaking’ spreading behaviors through the ridge dynamics. In stick-breaking, no ridge-spreading occurs and contact line pinning (hysteresis) is enhanced by cusp-bending while preserving a microscopic equilibrium at the ridge tip. We have furthered the understanding of spreading behaviors on soft solids and demonstrated the value of X-ray microscopy in elucidating various dynamic wetting behaviors on soft solids as well as puzzling biological issues.« less

You Must Keep Money Moving

ERIC Educational Resources Information Center

Heck, Andre; Vonk, Ron

2009-01-01

Physics teachers often like to discuss physics concepts with their students on the basis of simple demonstration experiments. In this article, we discuss an experiment for which one only needs a few coins of the same denomination and a wooden stick: the coins are laid alongside the stick on a horizontal surface, the stick is rotated about one of…

LIBRE Stick Figure Tool: A Graphic Organizer to Foster Self-Regulated Social Cognitive Problem Solving

ERIC Educational Resources Information Center

Guerra, Norma S.

2009-01-01

Graphic organizers are powerful visual tools. The representation provides dimension and relationship to ideas and a framework for organization and elaboration. The LIBRE Stick Figure Tool is a graphic organizer for the problem-solving application of the LIBRE Model counseling approach. It resembles a "stick person" and offers the teacher and…

D'Nealian Handwriting versus Circle-Stick Print.

ERIC Educational Resources Information Center

Thurber, Donald N.

This paper argues against teaching children to make letters using circle-stick writing. It contends that the circle-stick method requires continued pen/pencil lifts hindering rhythm or flow in the writing process and that there is little carry-over value into cursive writing as the two scripts are totally different. D'Nealian print, one type of…

Ball-Stick-Bird: Teaching with the Story Engram.

ERIC Educational Resources Information Center

Fuller, Renee

1990-01-01

This paper describes the Ball-Stick-Bird reading system, which shows students how all the letters of the alphabet can be built with three basic forms: a circle (ball), a line (stick), and an angle (bird). The method also uses modified phonics and developmental linguistics, aids story reading by using capital letters in the beginning, and enhances…

Olfaction in Parkin carriers in Chinese patients with Parkinson disease.

PubMed

Wang, Ying; Wu, Jian-Jun; Liu, Feng-Tao; Chen, Kui; Chen, Chen; Luo, Su-Shan; Wang, Yi-Xuan; Li, Da-Ke; Guan, Rong-Yuan; Yang, Yu-Jie; An, Yu; Wang, Jian; Sun, Yi-Min

2017-05-01

Olfactory identification was reported to be better among PD (Parkinson disease) patients with Parkin mutations, but previous studies didn't eliminate the interference of other PD related genes on olfaction, and whether olfaction of Parkin mutations patients was better in Chinese population was still unknown. To assess olfaction function among PD patients with Parkin mutations in Chinese population. A total of 226 PD patients with a positive family history or an early-onset age (<50 years) were enrolled for genetic testing of PD related genes by target sequencing and multiple ligation-dependent probe amplification. The clinical data including olfactory function test were investigated. Linear regression was performed to adjust for the covariates between all groups. There were 68 patients found having a negative result in PD genetic testing and 43 patients carrying homozygous or compound heterozygous Parkin mutations. Among them, 49 PD panel negative patients and 33 PD- Parkin patients had results of olfactory assessment. PD -Parkin patients performed significantly better on the Sniffin' Sticks tests than panel negative patients (8.0 ± 1.7 vs. 5.7 ± 1.9, p  <   .001), but still worse compared to healthy controls (9.4 ± 1.5, p  =   .003). These differences persisted after adjusting for confounders. Among Chinese population, PD -Parkin patients had relatively preserved olfaction compared to PD panel negative patients after eliminating the interference of other PD related genes, but were still worse than healthy controls.

Slow Earthquakes and The Mechanics of Slow Frictional Stick-Slip

NASA Astrophysics Data System (ADS)

Marone, Chris; Scuderi, Marco; Leeman, John; Saffer, Demian; Collettini, Cristiano; Johnson, Paul

2015-04-01

Slow earthquakes represent one mode of the spectrum of fault slip behaviors ranging from steady aseismic slip to normal earthquakes. Like normal earthquakes, slow earthquakes can occur repetitively, such that a fault fails in a form of stick-slip failure defined by interseismic strain accumulation and slow, quasidynamic slip. The mechanics of frictional stick-slip and seismogenic faulting appear to apply to slow earthquakes, however, the mechanisms that limit dynamic slip velocity, rupture propagation speed, and the scaling between moment and duration of slow earthquakes are poorly understood. Here, we describe laboratory experiments that explore the mechanics of repetitive, slow frictional stick-slip failure. We document the role of loading stiffness and friction constitutive behavior in dictating the properties of repetitive, frictional stick-slip. Our results show that a spectrum of dynamic and quasidynamic slip velocities can occur in stick-slip events depending on the relation between loading stiffness k and the rheologic critical stiffness kc given, in the context of rate and state friction, by the ratio of the friction rate parameter (b-a) divided by the critical friction distance Dc. Slow slip is favored by conditions for which k is ~ equal to kc, whereas normal, fast stick slip occurs when k/kc < 1. We explore the role of elastic coupling and spatially extended slip propagation by comparing slow slip results for shear in a layer driven by forcing blocks of varying stiffness. We evaluate our data in the framework of rate and state friction laws and focus on the frictional mechanics of slow stick-slip failure with special attention paid to the connections between quasidynamic failure and mechanisms of the brittle-ductile transition in fault rocks.

Head-controlled assistive telerobot with extended physiological proprioception capability

NASA Astrophysics Data System (ADS)

Salganicoff, Marcos; Rahman, Tariq; Mahoney, Ricardo; Pino, D.; Jayachandran, Vijay; Kumar, Vijay; Chen, Shoupu; Harwin, William S.

1995-12-01

People with disabilities such as quadriplegia can use mouth-sticks and head-sticks as extension devices to perform desired manipulations. These extensions provide extended proprioception which allows users to directly feel forces and other perceptual cues such as texture present at the tip of the mouth-stick. Such devices are effective for two principle reasons: because of their close contact with the user's tactile and proprioceptive sensing abilities; and because they tend to be lightweight and very stiff, and can thus convey tactile and kinesthetic information with high-bandwidth. Unfortunately, traditional mouth-sticks and head-sticks are limited in workspace and in the mechanical power that can be transferred because of user mobility and strength limitations. We describe an alternative implementation of the head-stick device using the idea of a virtual head-stick: a head-controlled bilateral force-reflecting telerobot. In this system the end-effector of the slave robot moves as if it were at the tip of an imaginary extension of the user's head. The design goal is for the system is to have the same intuitive operation and extended proprioception as a regular mouth-stick effector but with augmentation of workspace volume and mechanical power. The input is through a specially modified six DOF master robot (a PerForceTM hand-controller) whose joints can be back-driven to apply forces at the user's head. The manipulation tasks in the environment are performed by a six degree-of-freedom slave robot (the Zebra-ZEROTM) with a built-in force sensor. We describe the prototype hardware/software implementation of the system, control system design, safety/disability issues, and initial evaluation tasks.

76 FR 77452 - Advisory Circular for Stall and Stick Pusher Training

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

... a recovery from a stall or approach. Scenario-based training that includes realistic events that... training, testing, and checking recommendations designed to maximize the likelihood that pilots will... circular was developed based on a review of recommended practices developed by major aircraft manufacturers...

The knight stick trap and knight stick sticky wraps: new tools for stable fly (Diptera: Muscidae) management

USDA-ARS?s Scientific Manuscript database

The stable fly is a noxious hematophagous pest of livestock, feral animals and humans. In the US, traps have been used for many years to survey stable flies and affect some degree of population reduction. A new stable fly trap, the Knight Stick (KS), has recently appeared on the market and studies w...

Effect of hinge-moment parameters on elevator stick forces in rapid maneuvers

NASA Technical Reports Server (NTRS)

Jones, R. T.; Greenberg, H.

1976-01-01

The importance of the stick force per unit normal acceleration as a criterion of longitudinal stability and the critical dependence of this gradient on elevator hinge moment parameters are investigated with special reference to transient effects for maneuvers of short duration. The analysis shows that different combinations of elevator parameters, which give the same stick force per unit acceleration in turns, give widely different force variations during the entries into and recoveries from steady turns and during maneuvers of short duration such as abrupt pull-ups. The stick force per unit acceleration is greater for abrupt than for gradual control movements.

Molecular basis of crystal morphology-dependent adhesion behavior of mefenamic acid during tableting.

PubMed

Waknis, Vrushali; Chu, Elza; Schlam, Roxana; Sidorenko, Alexander; Badawy, Sherif; Yin, Shawn; Narang, Ajit S

2014-01-01

The molecular basis of crystal surface adhesion leading to sticking was investigated by exploring the correlation of crystal adhesion to oxidized iron coated atomic force microscope (AFM) tips and bulk powder sticking behavior during tableting of two morphologically different crystals of a model drug, mefenamic acid (MA), to differences in their surface functional group orientation and energy. MA was recrystallized into two morphologies (plates and needles) of the same crystalline form. Crystal adhesion to oxidized iron coated AFM tips and bulk powder sticking to tablet punches was assessed using a direct compression formulation. Surface functional group orientation and energies on crystal faces were modeled using Accelrys Material Studio software. Needle-shaped morphology showed higher sticking tendency than plates despite similar particle size. This correlated with higher crystal surface adhesion of needle-shaped morphology to oxidized iron coated AFM probe tips, and greater surface energy and exposure of polar functional groups. Higher surface exposure of polar functional groups correlates with higher tendency to stick to metal surfaces and AFM tips, indicating involvement of specific polar interactions in the adhesion behavior. In addition, an AFM method is identified to prospectively assess the risk of sticking during the early stages of drug development.

Comparison of sticking probabilities of metal atoms in magnetron sputtering deposition of CuZnSnS films

NASA Astrophysics Data System (ADS)

Sasaki, K.; Kikuchi, S.

2014-10-01

In this work, we compared the sticking probabilities of Cu, Zn, and Sn atoms in magnetron sputtering deposition of CZTS films. The evaluations of the sticking probabilities were based on the temporal decays of the Cu, Zn, and Sn densities in the afterglow, which were measured by laser-induced fluorescence spectroscopy. Linear relationships were found between the discharge pressure and the lifetimes of the atom densities. According to Chantry, the sticking probability is evaluated from the extrapolated lifetime at the zero pressure, which is given by 2l0 (2 - α) / (v α) with α, l0, and v being the sticking probability, the ratio between the volume and the surface area of the chamber, and the mean velocity, respectively. The ratio of the extrapolated lifetimes observed experimentally was τCu :τSn :τZn = 1 : 1 . 3 : 1 . This ratio coincides well with the ratio of the reciprocals of their mean velocities (1 /vCu : 1 /vSn : 1 /vZn = 1 . 00 : 1 . 37 : 1 . 01). Therefore, the present experimental result suggests that the sticking probabilities of Cu, Sn, and Zn are roughly the same.

Intermittent stick-slip dynamics during the peeling of an adhesive tape from a roller.

PubMed

Cortet, Pierre-Philippe; Dalbe, Marie-Julie; Guerra, Claudia; Cohen, Caroline; Ciccotti, Matteo; Santucci, Stéphane; Vanel, Loïc

2013-02-01

We study experimentally the fracture dynamics during the peeling at a constant velocity of a roller adhesive tape mounted on a freely rotating pulley. Thanks to a high speed camera, we measure, in an intermediate range of peeling velocities, high frequency oscillations between phases of slow and rapid propagation of the peeling fracture. This so-called stick-slip regime is well known as the consequence of a decreasing fracture energy of the adhesive in a certain range of peeling velocity coupled to the elasticity of the peeled tape. Simultaneously with stick slip, we observe low frequency oscillations of the adhesive roller angular velocity which are the consequence of a pendular instability of the roller submitted to the peeling force. The stick-slip dynamics is shown to become intermittent due to these slow pendular oscillations which produce a quasistatic oscillation of the peeling angle while keeping constant the peeling fracture velocity (averaged over each stick-slip cycle). The observed correlation between the mean peeling angle and the stick-slip amplitude questions the validity of the usually admitted independence with the peeling angle of the fracture energy of adhesives.

Resource allocation in neural networks for motor control

NASA Astrophysics Data System (ADS)

Milton, J.; Cummins, J.; Gunnoe, J.; Tollefson, M.; Cabrera, J. L.; Ohira, T.

2006-03-01

Multiplicative noise plays an important part of a non-predictive control mechanism for stick balancing at the fingertip. However, intentionally-directed movements are also used in stick balancing, particularly by beginners. The interplay between intentional and non-predictive control mechanisms for stick balancing was assessed using two dual task paradigms: the subject was asked to either move one of their legs rhythmically or to imagine moving their leg while balancing a stick (55.4 cm, 35 g) at their fingertip. Performance was measured by determining the stick survival function, i.e. the fraction of trials (total >=25) for which the stick remained balanced at time t as a function of t. Performance was increased by concurrent rhythmic leg movements (50% survival time shifted from 8-9s to 15s in a typical subject). Imagined movements resulted in a similar improvement (50% survival time of 20s for the above subject) suggesting that this enhancement is not simply related to mechanical vibrations of the fingertip induced by leg movement. These observations emphasize the importance of the development of mathematical models for neural control of skilled motor movements that take into resource allocation of limited resources, such as intention.

Hyposmia: an underestimated and frequent adverse effect of chemotherapy.

PubMed

Riga, Maria; Chelis, Leonidas; Papazi, Theano; Danielides, Vasilios; Katotomichelakis, Michael; Kakolyris, Stylianos

2015-10-01

Optimal function of both the olfactory sensory neurons and the olfactory mucosa is a prerequisite for normal olfactory perception. Both the olfactory neurons and mucosa might be subjects to the neurotoxic and mucotoxic effects of chemotherapy. Despite the recognized importance of olfaction in nutrition and quality of life, the potential olfactory toxicity of chemotherapy regimens has not been adequately assessed. The aim of this study is to investigate whether mucotoxic and/or neurotoxic drugs compromise olfactory performance. Forty-four consecutive patients completed the "Sniffin' Sticks" test, an objective quantitative/qualitative method to assess olfactory function, at diagnosis and immediately before the infusion of the last session of three to four chemotherapy cycles, according to the therapeutic protocol. The patients underwent therapy containing oxaliplatin and antimetabolites (5-FU or capecitabine; O+A group), taxanes and platinum analogues (cisplatin and carboplatin; T+P group), or taxanes and anthracyclines (doxorubicin or liposomal doxorubicin; T+A group). A significant decrease was noted for olfactory threshold (OT), olfactory discrimination (OD), olfactory identification (OI), and the composite threshold-discrimination-identification (TDI) score. A significant deterioration of all olfactory indices was found for each chemotherapy group. Pairwise comparisons revealed significant differences between the O+A and the T+P group regarding OT and TDI. TDI scores were significantly lower after chemotherapy in all age groups. Patients older than 50 years were found to be more susceptible to olfactory toxicity than younger patients. Patients who undergo chemotherapy experience significant compromise in their olfactory function. A grading system for olfactory toxicity is proposed.

Continuous positive air pressure improves orthonasal olfactory function of patients with obstructive sleep apnea.

PubMed

Walliczek-Dworschak, Ute; Cassel, Werner; Mittendorf, Luisa; Pellegrino, Robert; Koehler, Ulrich; Güldner, Christian; Dworschak, Philipp Otto Georg; Hildebrandt, Olaf; Daniel, Hanna; Günzel, Thomas; Teymoortash, Afshin; Hummel, Thomas

2017-06-01

Recent studies have suggested that patients with obstructive sleep apnea (OSA) might be affected by olfactory impairment. However, more evidence is needed on the effect that OSA has on the chemical senses (olfaction and gustatory) of these patients, and whether continuous positive airway pressure (CPAP) treatment might help to reverse possible impairment. A prospective study was conducted with 44 OSA patients (17 female and 27 male, mean age 54 ± 9.9 years) who were diagnosed via polysomnography and eligible for CPAP treatment. Orthonasal olfactory and gustatory function was measured with the extended Sniffin' Sticks test battery and "taste strips," respectively, before and after CPAP treatment. Baseline olfaction was decreased in OSA patients and after CPAP therapy olfactory scores (odor threshold-discrimination-identification score [TDI]: baseline 29.4 ± 4.11 after CPAP 32.3 ± 4.82; p = 0.001; odor threshold [THR]: baseline 5.28 ± 1.69 after CPAP 6.78 ± 2.61; p = 0.000; odor identification [ID]: baseline 12.9 ± 1.95 after CPAP 13.6 ± 1.33; p = 0.013) improved significantly. In contrast, neither baseline taste function in OSA patients nor gustatory function after treatment seemed to be affected. Orthonasal olfactory function in patients with OSA improves under CPAP therapy; however, gustatory function is not impaired in OSA patients. Copyright © 2017 Elsevier B.V. All rights reserved.

What limits tool use in nonhuman primates? Insights from tufted capuchin monkeys (Sapajus spp.) and chimpanzees (Pan troglodytes) aligning three-dimensional objects to a surface

PubMed Central

la Cour, L. T.; Stone, B. W.; Hopkins, W.; Menzel, C.; Fragaszy, D.

2013-01-01

Perceptuomotor functions that support using hand tools can be examined in other manipulation tasks, such as alignment of objects to surfaces. We examined tufted capuchin monkeys’ and chimpanzees’ performance at aligning objects to surfaces while managing one or two spatial relations to do so. We presented 6 subjects of each species with a single stick to place into a groove, two sticks of equal length to place into two grooves, or two sticks joined as a T to place into a T-shaped groove. Tufted capuchins and chimpanzees performed equivalently on these tasks, aligning the straight stick to within 22.5° of parallel to the groove in approximately half of their attempts to place it, and taking more attempts to place the T stick than two straight sticks. The findings provide strong evidence that tufted capuchins and chimpanzees do not reliably align even one prominent axial feature of an object to a surface, and that managing two concurrent allocentric spatial relations in an alignment problem is significantly more challenging to them than managing two sequential relations. In contrast, humans from two years of age display very different perceptuomotor abilities in a similar task: they align sticks to a groove reliably on each attempt, and they readily manage two allocentric spatial relations concurrently. Limitations in aligning objects and in managing two or more relations at a time significantly constrain how nonhuman primates can use hand tools. PMID:23820935

Evaluation of Mycelium Based Acoustic Absorbers Grown on Select Agricultural Byproduct Substrates

USDA-ARS?s Scientific Manuscript database

This research examines the use of a novel new renewable resource in acoustic absorption applications. The material under test is based on the fruiting body of fungi, a mushroom, in the phylum of Basidiomycetes, which are grown on semi-hydrophobic substrates such as cotton byproducts, leaves, sticks ...

Benchmarking Tool Kit.

ERIC Educational Resources Information Center

Canadian Health Libraries Association.

Nine Canadian health libraries participated in a pilot test of the Benchmarking Tool Kit between January and April, 1998. Although the Tool Kit was designed specifically for health libraries, the content and approach are useful to other types of libraries as well. Used to its full potential, benchmarking can provide a common measuring stick to…

Influence of grid bar shape on field cleaner performance - Screening tests

USDA-ARS?s Scientific Manuscript database

Extractor type cleaners are used on cotton strippers and in the seed cotton cleaning machinery in the ginning process to remove large foreign material such as burrs and sticks. Previous research on the development of extractor type cleaners focused on machine design and operating parameters that max...

Process Development for the Design and Manufacturing of Personalizable Mouth Sticks.

PubMed

Berger, Veronika M; Pölzer, Stephan; Nussbaum, Gerhard; Ernst, Waltraud; Major, Zoltan

2017-01-01

To increase the independence of people with reduced hand/arm functionality, a process to generate personalizable mouth sticks was developed based on the participatory design principle. In a web tool, anybody can choose the geometry and the materials of their mouth piece, stick and tip. Manufacturing techniques (e.g. 3D printing) and materials used in the process are discussed and evaluated.

Beyond Carrots and Sticks: Toward a Transformative Model of Division I Athletics

ERIC Educational Resources Information Center

Clubb, Sandy Hatfield

2012-01-01

The old expression about the carrot and the stick, which refers to the application of reward and punishment to induce action, dates back to the days when pack mules were used for transportation. The mules would move toward carrots that dangled just ahead of them--and move all the faster because they feared drivers with sticks behind them. In 2012,…

The development of bodily self-consciousness: changing responses to the Full Body Illusion in childhood.

PubMed

Cowie, Dorothy; McKenna, Aisling; Bremner, Andrew J; Aspell, Jane E

2018-05-01

The present work investigates the development of bodily self-consciousness and its relation to multisensory bodily information, by measuring for the first time the development of responses to the full body illusion in childhood. We tested three age groups of children: 6- to 7-year-olds (n = 28); 8- to 9-year-olds (n = 21); 10- to 11-year-olds (n = 19), and a group of adults (n = 31). Each participant wore a head-mounted display (HMD) which displayed a view from a video camera positioned 2 metres behind their own back. Thus, they could view a virtual body from behind. We manipulated visuo-tactile synchrony by showing the participants a view of their virtual back being stroked with a stick at the same time and same place as their real back (synchronous condition), or at different times and places (asynchronous condition). After each period of stroking, we measured three aspects of bodily self-consciousness: drift in perceived self-location, self-identification with the virtual body, and touch referral to the virtual body. Results show that self-identification with the virtual body was significantly stronger in the synchronous condition than in the asynchronous condition even in the youngest group tested; however, the size of this effect increased with age. Touch referral to the virtual body was greater in the synchronous condition than in the asynchronous condition only for 10- to 11-year-olds and adults. Drift in perceived self-location was greater in the synchronous condition than in the asynchronous condition only for adults. Thus, the youngest age tested can self-identify with a virtual body, but the links between multisensory signals and bodily self-consciousness develop significantly across childhood. This suggests a long period of development of the bodily self and exciting potential for the use of virtual reality technologies with children. © 2017 John Wiley & Sons Ltd.

Study on incidence of needle stick injury and factors associated with this problem among medical students.

PubMed

Norsayani, Mohamad Yaakob; Noor Hassim, Ismail

2003-05-01

Medical students face the threat of needle stick injury with the consequent risk of acquiring blood-borne infection by pathogens such as HIV, Hepatitis B and Hepatitis C while performing their clinical activities in the hospitals. A cross-sectional study was conducted among 417 final year medical students from Universiti Kebangsaan Malaysia (UKM), University Malaya (UM) and Universiti Putra Malaysia (UPM). The aims of the study were to determine the incidence of cases and episodes of needle stick injury among them in the past year. This study was also done to find out the factors that might be associated with the occurrence of this problem. The factors were sociodemographic factors, duration of exposure, level of knowledge of blood-borne diseases and Universal Precaution, perception of risk of blood-borne diseases and level of practice of Universal Precaution. The incidence of needle stick injury among medical students was 14.1% (59 cases). The total number of episodes of needle stick injury was 87 and the incidence of episodes among respondents was high i.e. 20.9%. The highest incidence of episodes of needle stick injury occurred in Obstetric & Gynaecology postings, followed by Medicine and Surgery. For clinical procedures, venepuncture had the highest incidence followed by setting up drips and giving parenteral injections. The results showed the students who had needle stick injury (cases) had lower scores in the practice of Universal Precautions than non-cases (p<0.05). There was a significant association between the level of practice of Universal Precautions and the number of episodes of needle stick injury, i.e. the higher the score for the practice of Universal Precautions, the lower the number of episodes (beta=-2.03 x 10(-2), p<0.05). This study showed that medical students are at risk of needle stick injury and blood-borne infections during their clinical activities while performing procedures on patients especially for those who were poor at practising Universal Precautions. Therefore some preventive measures should be taken by the management of the universities and medical students to avoid the occurrence of these problems.

Acoustic emission analysis of fiber-reinforced composite in flexural testing.

PubMed

Alander, Pasi; Lassila, Lippo V J; Tezvergil, Arzu; Vallittu, Pekka K

2004-05-01

The aim of this study was to examine the emission of acoustic signals from six commercially available fiber-reinforced composites (FRC) used in the frameworks of fixed partial dentures in material bending. FRC test specimens were made of six commercially available fiber products of polyethylene or glass and five light-curing resins. FRC test specimens were polymerized with a hand light-curing unit or with a light-curing oven. The flexural test for determination of ultimate flexural strength of test specimens (n = 6) was based on the ISO 10477 standard after the specimens were stored in air or in water for two weeks. The acoustic emission (AE) signals were monitored during three-point loading test of the test specimens using a test with increasing loading levels until the specimens fractured. Generally, stress level required for the AE activity initiation ranged from 107 MPa (Ribbond) to 579 MPa (everStick). The ultimate flexural strength of FRC specimens were higher, ranging from 132 to 764 MPa, being highest with everStick and Vectris FRC, and lowest with Ribbond FRC. ANOVA showed a statistically significant difference between the initiation of AE activity and the ultimate flexural strength according to the brand (p < 0.001) storing conditions (p < 0.001) and polymerization procedure (p < 0.001). AE activity and ultimate flexural strength correlated significantly (p < 0.010, r = 0.887). The result of this study suggested that AE activity in FRC specimens started at a 19-32% lower stress level than occurred at final fracture.

Large Ka-Band Slot Array for Digital Beam-Forming Applications

NASA Technical Reports Server (NTRS)

Rengarajan, Sembiam; Zawadzki, Mark S.; Hodges, Richard E.

2011-01-01

This work describes the development of a large Ka Band Slot Array for the Glacier and Land Ice Surface Topography Interferometer (GLISTIN), a proposed spaceborne interferometric synthetic aperture radar for topographic mapping of ice sheets and glaciers. GLISTIN will collect ice topography measurement data over a wide swath with sub-seasonal repeat intervals using a Ka-band digitally beamformed antenna. For technology demonstration purpose a receive array of size 1x1 m, consisting of 160x160 radiating elements, was developed. The array is divided into 16 sticks, each stick consisting of 160x10 radiating elements, whose outputs are combined to produce 16 digital beams. A transmit array stick was also developed. The antenna arrays were designed using Elliott's design equations with the use of an infinite-array mutual-coupling model. A Floquet wave model was used to account for external coupling between radiating slots. Because of the use of uniform amplitude and phase distribution, the infinite array model yielded identical values for all radiating elements but for alternating offsets, and identical coupling elements but for alternating positive and negative tilts. Waveguide-fed slot arrays are finding many applications in radar, remote sensing, and communications applications because of their desirable properties such as low mass, low volume, and ease of design, manufacture, and deployability. Although waveguide-fed slot arrays have been designed, built, and tested in the past, this work represents several advances to the state of the art. The use of the infinite array model for the radiating slots yielded a simple design process for radiating and coupling slots. Method of moments solution to the integral equations for alternating offset radiating slots in an infinite array environment was developed and validated using the commercial finite element code HFSS. For the analysis purpose, a method of moments code was developed for an infinite array of subarrays. Overall the 1x1 m array was found to be successful in meeting the objectives of the GLISTIN demonstration antenna, especially with respect to the 0.042deg, 1/10th of the beamwidth of each stick, relative beam alignment between sticks.

[The assessment of functional capacity in workers with the thoracic outlet syndrome. A pilot study].

PubMed

Capodaglio, P; Gibellini, R; Grilli, C; Bazzini, G

1997-01-01

Occupational specialists are well aware of the lack of objective measurements for the diagnosis and the functional evaluation of workers affected by thoracic outlet syndrome (TOS). Subjects affected by TOS refer pain, sensation of fatigue in the arm frequently aggravated by overhead work. A "stick-up" position tends to close the costoclavicular space and tense the neck and shoulder muscles to bring into play the abnormal compression mechanism that may affect the brachial plexus nerves and the subclavian vessels. In a previous study, we demonstrated the reliability of an isokinetic hand grip endurance test. In this pilot study we asked 7 industrial workers affected by TOS to perform a 30-second isokinetic endurance test for hand gripping with a Lido WorkSET dynamometer. Tests were performed in two positions (resting and "stick-up" position) before and after a 3-week intensive rehabilitation program. In addition, the subjects performed daily aerobic exercise with an arm crank ergometer. Objective indexes of posttreatment improvement were found. Subjects were able to generate higher grip forces during the isokinetic hand grip endurance test and to sustain higher mechanical workload with the arm ergometer at the same intensity level for longer duration after completion of the rehabilitation program.

Stick-slip instabilities in sheared granular flow: The role of friction and acoustic vibrations.

PubMed

Lieou, Charles K C; Elbanna, Ahmed E; Langer, J S; Carlson, J M

2015-08-01

We propose a theory of shear flow in dense granular materials. A key ingredient of the theory is an effective temperature that determines how the material responds to external driving forces such as shear stresses and vibrations. We show that, within our model, friction between grains produces stick-slip behavior at intermediate shear rates, even if the material is rate strengthening at larger rates. In addition, externally generated acoustic vibrations alter the stick-slip amplitude, or suppress stick-slip altogether, depending on the pressure and shear rate. We construct a phase diagram that indicates the parameter regimes for which stick-slip occurs in the presence and absence of acoustic vibrations of a fixed amplitude and frequency. These results connect the microscopic physics to macroscopic dynamics and thus produce useful information about a variety of granular phenomena, including rupture and slip along earthquake faults, the remote triggering of instabilities, and the control of friction in material processing.

Peel-and-Stick: Fabricating Thin Film Solar Cell on Universal Substrates

PubMed Central

Lee, Chi Hwan; Kim, Dong Rip; Cho, In Sun; William, Nemeth; Wang, Qi; Zheng, Xiaolin

2012-01-01

Fabrication of thin-film solar cells (TFSCs) on substrates other than Si and glass has been challenging because these nonconventional substrates are not suitable for the current TFSC fabrication processes due to poor surface flatness and low tolerance to high temperature and chemical processing. Here, we report a new peel-and-stick process that circumvents these fabrication challenges by peeling off the fully fabricated TFSCs from the original Si wafer and attaching TFSCs to virtually any substrates regardless of materials, flatness and rigidness. With the peel-and-stick process, we integrated hydrogenated amorphous silicon (a-Si:H) TFSCs on paper, plastics, cell phone and building windows while maintaining the original 7.5% efficiency. The new peel-and-stick process enables further reduction of the cost and weight for TFSCs and endows TFSCs with flexibility and attachability for broader application areas. We believe that the peel-and-stick process can be applied to thin film electronics as well. PMID:23277871

Peel-and-Stick: Fabricating Thin Film Solar Cell on Universal Substrates

NASA Astrophysics Data System (ADS)

Lee, Chi Hwan; Kim, Dong Rip; Cho, In Sun; William, Nemeth; Wang, Qi; Zheng, Xiaolin

2012-12-01

Fabrication of thin-film solar cells (TFSCs) on substrates other than Si and glass has been challenging because these nonconventional substrates are not suitable for the current TFSC fabrication processes due to poor surface flatness and low tolerance to high temperature and chemical processing. Here, we report a new peel-and-stick process that circumvents these fabrication challenges by peeling off the fully fabricated TFSCs from the original Si wafer and attaching TFSCs to virtually any substrates regardless of materials, flatness and rigidness. With the peel-and-stick process, we integrated hydrogenated amorphous silicon (a-Si:H) TFSCs on paper, plastics, cell phone and building windows while maintaining the original 7.5% efficiency. The new peel-and-stick process enables further reduction of the cost and weight for TFSCs and endows TFSCs with flexibility and attachability for broader application areas. We believe that the peel-and-stick process can be applied to thin film electronics as well.

Dogs (Canis familiaris) stick to what they have learned rather than conform to their conspecifics’ behavior

PubMed Central

Sultan, Amira; Kaminski, Juliane; Mojzisch, Andreas

2018-01-01

In recent years, an increasing number of studies has investigated majority influence in nonhuman animals. However, due to both terminological and methodological issues, evidence for conformity in nonhuman animals is scarce and controversial. Preliminary evidence suggests that wild birds, wild monkeys, and fish show conformity, that is, forgoing personal information in order to copy the majority. By contrast, chimpanzees seem to lack this tendency. The present study is the first to examine whether dogs (Canis familiaris) show conformity. Specifically, we tested whether dogs conform to a majority of conspecifics rather than stick to what they have previously learned. After dogs had acquired a behavioral preference via training (i.e., shaping), they were confronted with counter-preferential behavior of either no, one or three conspecifics. Traditional frequentist analyses show that the dogs’ behavior did not differ significantly between the three conditions. Complementary Bayesian analyses suggest that our data provide moderate evidence for the null hypothesis. In conclusion, our results suggest that dogs stick to what they have learned rather than conform to the counter-preferential behavior of others. We discuss the possible statistical and methodological limitations of this finding. Furthermore, we take a functional perspective on conformity and discuss under which circumstances dogs might show conformity after all. PMID:29570747

DOE Office of Scientific and Technical Information (OSTI.GOV)

Atutov, S. N., E-mail: atutovsn@mail.ru; Plekhanov, A. I.

We present the results of a systematic study of Knudsen’s flow of Rb atoms in cylindrical capillary cells coated with a polydimethylsiloxane (PDMS) compound. The purpose of the investigation is to determine the characterization of the coating in terms of the sticking probability and sticking time of Rb on the two types of coating of high and medium viscosities. We report the measurement of the sticking probability of a Rb atom to the coating equal to 4.3 × 10{sup −5}, which corresponds to the number of bounces 2.3 × 10{sup 4} at room temperature. These parameters are the same formore » the two kinds of PDMS used. We find that at room temperature, the respective sticking times for high-viscosity and medium-viscosity PDMS are 22 ± 3 μs and 49 ± 6 μs. These sticking times are about million times larger than the sticking time derived from the surface Rb atom adsorption energy and temperature of the coating. A tentative explanation of this surprising result is proposed based on the bulk diffusion of the atoms that collide with the surface and penetrate inside the coating. The results can be important in many resonance cell experiments, such as the efficient magnetooptical trapping of rare elements or radioactive isotopes and in experiments on the light-induced drift effect.« less

Quantum dynamics of hydrogen atoms on graphene. II. Sticking.

PubMed

Bonfanti, Matteo; Jackson, Bret; Hughes, Keith H; Burghardt, Irene; Martinazzo, Rocco

2015-09-28

Following our recent system-bath modeling of the interaction between a hydrogen atom and a graphene surface [Bonfanti et al., J. Chem. Phys. 143, 124703 (2015)], we present the results of converged quantum scattering calculations on the activated sticking dynamics. The focus of this study is the collinear scattering on a surface at zero temperature, which is treated with high-dimensional wavepacket propagations with the multi-configuration time-dependent Hartree method. At low collision energies, barrier-crossing dominates the sticking and any projectile that overcomes the barrier gets trapped in the chemisorption well. However, at high collision energies, energy transfer to the surface is a limiting factor, and fast H atoms hardly dissipate their excess energy and stick on the surface. As a consequence, the sticking coefficient is maximum (∼0.65) at an energy which is about one and half larger than the barrier height. Comparison of the results with classical and quasi-classical calculations shows that quantum fluctuations of the lattice play a primary role in the dynamics. A simple impulsive model describing the collision of a classical projectile with a quantum surface is developed which reproduces the quantum results remarkably well for all but the lowest energies, thereby capturing the essential physics of the activated sticking dynamics investigated.

Quantum dynamics of hydrogen atoms on graphene. II. Sticking

NASA Astrophysics Data System (ADS)

Bonfanti, Matteo; Jackson, Bret; Hughes, Keith H.; Burghardt, Irene; Martinazzo, Rocco

2015-09-01

Following our recent system-bath modeling of the interaction between a hydrogen atom and a graphene surface [Bonfanti et al., J. Chem. Phys. 143, 124703 (2015)], we present the results of converged quantum scattering calculations on the activated sticking dynamics. The focus of this study is the collinear scattering on a surface at zero temperature, which is treated with high-dimensional wavepacket propagations with the multi-configuration time-dependent Hartree method. At low collision energies, barrier-crossing dominates the sticking and any projectile that overcomes the barrier gets trapped in the chemisorption well. However, at high collision energies, energy transfer to the surface is a limiting factor, and fast H atoms hardly dissipate their excess energy and stick on the surface. As a consequence, the sticking coefficient is maximum (˜0.65) at an energy which is about one and half larger than the barrier height. Comparison of the results with classical and quasi-classical calculations shows that quantum fluctuations of the lattice play a primary role in the dynamics. A simple impulsive model describing the collision of a classical projectile with a quantum surface is developed which reproduces the quantum results remarkably well for all but the lowest energies, thereby capturing the essential physics of the activated sticking dynamics investigated.

A comparison of muscle activity in concentric and counter movement maximum bench press.

PubMed

van den Tillaar, Roland; Ettema, Gertjan

2013-01-01

The purpose of this study was to compare the kinematics and muscle activation patterns of regular free-weight bench press (counter movement) with pure concentric lifts in the ascending phase of a successful one repetition maximum (1-RM) attempt in the bench press. Our aim was to evaluate if diminishing potentiation could be the cause of the sticking region. Since diminishing potentiation cannot occur in pure concentric lifts, the occurrence of a sticking region in this type of muscle actions would support the hypothesis that the sticking region is due to a poor mechanical position. Eleven male participants (age 21.9 ± 1.7 yrs, body mass 80.7 ± 10.9 kg, body height 1.79 ± 0.07 m) conducted 1-RM lifts in counter movement and in pure concentric bench presses in which kinematics and EMG activity were measured. In both conditions, a sticking region occurred. However, the start of the sticking region was different between the two bench presses. In addition, in four of six muscles, the muscle activity was higher in the counter movement bench press compared to the concentric one. Considering the findings of the muscle activity of six muscles during the maximal lifts it was concluded that the diminishing effect of force potentiation, which occurs in the counter movement bench press, in combination with a delayed muscle activation unlikely explains the existence of the sticking region in a 1-RM bench press. Most likely, the sticking region is the result of a poor mechanical force position.

Implications of basal micro-earthquakes and tremor for ice stream mechanics: Stick-slip basal sliding and till erosion

NASA Astrophysics Data System (ADS)

Barcheck, C. Grace; Tulaczyk, Slawek; Schwartz, Susan Y.; Walter, Jacob I.; Winberry, J. Paul

2018-03-01

The Whillans Ice Plain (WIP) is unique among Antarctic ice streams because it moves by stick-slip. The conditions allowing stick-slip and its importance in controlling ice dynamics remain uncertain. Local basal seismicity previously observed during unstable slip is a clue to the mechanism of ice stream stick-slip and a window into current basal conditions, but the spatial extent and importance of this basal seismicity are unknown. We analyze data from a 2010-2011 ice-plain-wide seismic and GPS network to show that basal micro-seismicity correlates with large-scale patterns in ice stream slip behavior: Basal seismicity is common where the ice moves the least between unstable slip events, with small discrete basal micro-earthquakes happening within 10s of km of the central stick-slip nucleation area and emergent basal tremor occurring downstream of this area. Basal seismicity is largely absent in surrounding areas, where inter-slip creep rates are high. The large seismically active area suggests that a frictional sliding law that can accommodate stick-slip may be appropriate for ice stream beds on regional scales. Variability in seismic behavior over inter-station distances of 1-10 km indicates heterogeneity in local bed conditions and frictional complexity. WIP unstable slips may nucleate when stick-slip basal earthquake patches fail over a large area. We present a conceptual model in which basal seismicity results from slip-weakening frictional failure of over-consolidated till as it is eroded and mobilized into deforming till.

A Comparison of Muscle Activity in Concentric and Counter Movement Maximum Bench Press

PubMed Central

van den Tillaar, Roland; Ettema, Gertjan

2013-01-01

The purpose of this study was to compare the kinematics and muscle activation patterns of regular free-weight bench press (counter movement) with pure concentric lifts in the ascending phase of a successful one repetition maximum (1-RM) attempt in the bench press. Our aim was to evaluate if diminishing potentiation could be the cause of the sticking region. Since diminishing potentiation cannot occur in pure concentric lifts, the occurrence of a sticking region in this type of muscle actions would support the hypothesis that the sticking region is due to a poor mechanical position. Eleven male participants (age 21.9 ± 1.7 yrs, body mass 80.7 ± 10.9 kg, body height 1.79 ± 0.07 m) conducted 1-RM lifts in counter movement and in pure concentric bench presses in which kinematics and EMG activity were measured. In both conditions, a sticking region occurred. However, the start of the sticking region was different between the two bench presses. In addition, in four of six muscles, the muscle activity was higher in the counter movement bench press compared to the concentric one. Considering the findings of the muscle activity of six muscles during the maximal lifts it was concluded that the diminishing effect of force potentiation, which occurs in the counter movement bench press, in combination with a delayed muscle activation unlikely explains the existence of the sticking region in a 1-RM bench press. Most likely, the sticking region is the result of a poor mechanical force position. PMID:24235985

Human stick balancing: Tuning Lèvy flights to improve balance control

NASA Astrophysics Data System (ADS)

Cabrera, Juan Luis; Milton, John G.

2004-09-01

State-dependent, or parametric, noise is an essential component of the neural control mechanism for stick balancing at the fingertip. High-speed motion analysis in three dimensions demonstrates that the controlling movements made by the fingertip during stick balancing can be described by a Lévy flight. The Lévy index, α, is approximately 0.9; a value close to optimal for a random search. With increased skill, the index α does not change. However, the tails of the Lévy distribution become broader. These observations suggest a Lévy flight that is truncated by the properties of the nervous and musculoskeletal system; the truncation decreasing as skill level increases. Measurements of the cross-correlation between the position of the tip of the stick and the fingertip demonstrate that the role of closed-loop feedback changes with increased skill. Moreover, estimation of the neural latencies for stick balancing show that for a given stick length, the latency increases with skill level. It is suggested that the neural control for stick balancing involves a mechanism in which brief intervals of consciously generated, corrective movements alternate with longer intervals of prediction-free control. With learning the truncation of the Lévy flight becomes better optimized for balance control and hence the time between successive conscious corrections increases. These observations provide the first evidence that changes in a Lévy flight may have functional significance for the nervous system. This work has implications for the control of balancing problems ranging from falling in the elderly to the design of two-legged robots and earthquake proof buildings.

[Correlation between physical characteristics of sticks and quality of traditional Chinese medicine pills prepared by plastic molded method].

PubMed

Wang, Ling; Xian, Jiechen; Hong, Yanlong; Lin, Xiao; Feng, Yi

2012-05-01

To quantify the physical characteristics of sticks of traditional Chinese medicine (TCM) honeyed pills prepared by the plastic molded method and the correlation of adhesiveness and plasticity-related parameters of sticks and quality of pills, in order to find major parameters and the appropriate range impacting pill quality. Sticks were detected by texture analyzer for their physical characteristic parameters such as hardness and compression action, and pills were observed by visual evaluation for their quality. The correlation of both data was determined by the stepwise discriminant analysis. Stick physical characteristic parameter l(CD) can exactly depict the adhesiveness, with the discriminant equation of Y0 - Y1 = 6.415 - 41.594l(CD). When Y0 < Y1, pills were scattered well; when Y0 > Y1, pills were adhesive with each other. Pills' physical characteristic parameters l(CD) and l(AC), Ar, Tr can exactly depict smoothness of pills, with the discriminant equation of Z0 - Z1 = -195.318 + 78.79l(AC) - 3 258. 982Ar + 3437.935Tr. When Z0 < Z1, pills were smooth on surface. When Z0 > Z1, pills were rough on surface. The stepwise discriminant analysis is made to show the obvious correlation between key physical characteristic parameters l(CD) and l(AC), Ar, Tr of sticks and appearance quality of pills, defining the molding process for preparing pills by the plastic molded and qualifying ranges of key physical characteristic parameters characterizing intermediate sticks, in order to provide theoretical basis for prescription screening and technical parameter adjustment for pills.

[Laparascopic cholecystectomy in patients with acute cholecystitis].

PubMed

Tokin, A N; Chistiakov, A A; Mamalygina, L A; Zheliabin, D G; Osokin, G Iu

2008-01-01

Experience of diagnostics and treatment of 758 patients with acute cholecystitis was summarized. Authors attach the main importance to evaluation of ultrasound data and functional condition of respiratory and cardio-vascular sistem choosing the method of surgical treatment. Sparse use of laparoscopic cholecystectomy in treatment of acute cholecystitis compared with chronic may be explouned by presence of complications in patients which make problems in differentiation of tubular structures during the operation. Authors offered to use ultrasound dissection for clear identification of tubular structures and argon coagulation for hemostasis and safe mobilization of gall bladder. Stick to suggested tactics authors practically doubled the amount of performed laparoscopic cholecystectomies reducing at the same time the frequency of complications.

Numerical Simulations of Slow Stick Slip Events with PFC, a DEM Based Code

NASA Astrophysics Data System (ADS)

Ye, S. H.; Young, R. P.

2017-12-01

Nonvolcanic tremors around subduction zone have become a fascinating subject in seismology in recent years. Previous studies have shown that the nonvolcanic tremor beneath western Shikoku is composed of low frequency seismic waves overlapping each other. This finding provides direct link between tremor and slow earthquakes. Slow stick slip events are considered to be laboratory scaled slow earthquakes. Slow stick slip events are traditionally studied with direct shear or double direct shear experiment setup, in which the sliding velocity can be controlled to model a range of fast and slow stick slips. In this study, a PFC* model based on double direct shear is presented, with a central block clamped by two side blocks. The gauge layers between the central and side blocks are modelled as discrete fracture networks with smooth joint bonds between pairs of discrete elements. In addition, a second model is presented in this study. This model consists of a cylindrical sample subjected to triaxial stress. Similar to the previous model, a weak gauge layer at a 45 degrees is added into the sample, on which shear slipping is allowed. Several different simulations are conducted on this sample. While the confining stress is maintained at the same level in different simulations, the axial loading rate (displacement rate) varies. By varying the displacement rate, a range of slipping behaviour, from stick slip to slow stick slip are observed based on the stress-strain relationship. Currently, the stick slip and slow stick slip events are strictly observed based on the stress-strain relationship. In the future, we hope to monitor the displacement and velocity of the balls surrounding the gauge layer as a function of time, so as to generate a synthetic seismogram. This will allow us to extract seismic waveforms and potentially simulate the tremor-like waves found around subduction zones. *Particle flow code, a discrete element method based numerical simulation code developed by Itasca Inc.

Modeling study of deposition locations in the 291-Z plenum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahoney, L.A.; Glissmeyer, J.A.

The TEMPEST (Trent and Eyler 1991) and PART5 computer codes were used to predict the probable locations of particle deposition in the suction-side plenum of the 291-Z building in the 200 Area of the Hanford Site, the exhaust fan building for the 234-5Z, 236-Z, and 232-Z buildings in the 200 Area of the Hanford Site. The Tempest code provided velocity fields for the airflow through the plenum. These velocity fields were then used with TEMPEST to provide modeling of near-floor particle concentrations without particle sticking (100% resuspension). The same velocity fields were also used with PART5 to provide modeling ofmore » particle deposition with sticking (0% resuspension). Some of the parameters whose importance was tested were particle size, point of injection and exhaust fan configuration.« less

On Motion Planning with Uncertainty. Revised.

DTIC Science & Technology

1984-01-01

drift to the right, sticking at the right corner. See Fig. 1.6. Given the uncertainty in the position sensor, it is impossible to execute corrective ...action once * sticking is detected. This is because the corrective action depends on knowing the side at which sticking occurred. Worse than being...unable to correct errors should they occur, is the inability to detect success. In the given example, it is possible that the peg may move smoothly into

Effects of asperity contact on stick-slip dynamics

NASA Astrophysics Data System (ADS)

Yamaguchi, Tetsuo

2017-04-01

It is believed that asperity contact plays an important role in fricton, in particular in onset of dynamic slip or stick-slip motions. However, there remains very few studies controling asperities and observing their effects on mascoscopic stick-slip behavior or frictional constitutive laws. Here we perform stick-slip friction experiments between compliant gels with well-controlled asperity shape/size/configurations by molding technique. We find that, as curvature radius of the asperity becomes larger and the normal stress becomes smaller, velocity dependence turns from rate-strengthening to rate-weakening and accordingly, frictional behavior transitions from steady sliding, slow slip to fast slip. In this talk, we discuss the asperity size effects based on microscopic/macroscopic observations as well as a theoretical argument.

An evaluation study of mycelium based acoustic absorbers grown on agricultural by-product substrates

USDA-ARS?s Scientific Manuscript database

This research examines the use of a novel new renewable resource in acoustic absorption applications. The material under test is based on the fruiting body of fungi, a mushroom, in the phylum of Basidiomycetes, which are grown on semi-hydrophobic substrates such as cotton by-products, leaves, sticks...

Testing Bilingual Educational Methods: A Plea to End the Language-Mixing Taboo

ERIC Educational Resources Information Center

Antón, Eneko; Thierry, Guillaume; Goborov, Alexander; Anasagasti, Jon; Duñabeitia, Jon Andoni

2016-01-01

Language mixing in a given class is often avoided in bilingual education because of the generally held belief that "one subject" should be taught in only "one language" and "one person" should stick to "one language" in order to minimize confusion. Here, we compared the effects of mixing two languages and…

Modern Managers Move Away from the Carrot and Stick Approach.

ERIC Educational Resources Information Center

Stahelski, Anthony J.; Frost, Dean E.

Studies using social power theory constructs (French and Raven, 1959) to analyze compliance attempts in field settings show that the power bases are not consistently related to any subordinate outcome variables such as job performance or attitudes. A study was undertaken to test key hypotheses derived from the social power theory concerning…

Making Best Practices Better

ERIC Educational Resources Information Center

Dappolone, Mike

2013-01-01

It's easy to make excuses for not integrating technology into classes, and some of these excuses do have merit. If teachers plan on making the effort to overcome these difficulties, they must believe strongly in the strategies they select and stick to them long enough to at least test their effectiveness. Technology use is sometimes referred…

Unit: Sticking Together, Inspection Pack.

ERIC Educational Resources Information Center

Australian Science Education Project, Toorak, Victoria.

As a part of the unit materials in the series produced by the Australian Science Education Project, this teachers' guide is composed of four parts: introductory remarks, a core relating to bubbles and drops, options, and diagnostic tests. Materials are designed for students working at their own pace, either individually or in small groups.…

Olfactory function and malnutrition in geriatric patients.

PubMed

Smoliner, Christine; Fischedick, Andrea; Sieber, Cornel C; Wirth, Rainer

2013-12-01

Impaired olfaction is considered to be a risk factor for malnutrition in older adults; however, there is little research on this association. The aim of this study was to investigate whether olfactory deficits are associated with an impaired nutritional status in older patients. Study participants were recruited from a geriatric day hospital. Nutritional status was assessed with body mass index and Mini-Nutritional Assessment. Olfactory function was evaluated with the Sniffin' Sticks test (SST) and subjectively rated by the patient. Self-caring capacity was rated with the Barthel Index and cognitive status with the Mini-Mental State Examination. One hundred ninety-one patients, 71.7% female, were included with a mean age of 79.6 ± 6.3 years. Prevalence of hyposmia was 39.3%, and 31.9% of patients were functionally anosmic. Malnourished patients did not have a significantly lower Sniffin' Sticks test score than patients at nutritional risk or malnourished patients. In linear regression analysis, nutritional status was only influenced by Barthel Index, age, and number of drugs but not by olfactory function. In this sample, olfactory function was not associated with nutritional status.

Deposition and re-erosion studies by means of local impurity injection in TEXTOR

NASA Astrophysics Data System (ADS)

Textor Team Kirschner, A.; Kreter, A.; Wienhold, P.; Brezinsek, S.; Coenen, J. W.; Esser, H. G.; Pospieszczyk, A.; Schulz, Ch.; Breuer, U.; Borodin, D.; Clever, M.; Ding, R.; Galonska, A.; Huber, A.; Litnovsky, A.; Matveev, D.; Ohya, K.; Philipps, V.; Samm, U.; Schmitz, O.; Schweer, B.; Stoschus, H.

2011-08-01

Pioneering experiments to study local erosion and deposition processes have been carried out in TEXTOR by injecting 13C marked hydrocarbons (CH4 and C2H4) as well as silane (SiD4) and tungsten-hexafluoride (WF6) through test limiters exposed to the edge plasma. The influence of various limiter materials (C, W, Mo) and surface roughness, different geometries (spherical or roof-like) and local plasma parameters has been studied. Depending on these conditions the local deposition efficiency of injected species varies between 0.1% and 9% - the largest deposition has been found for 13CH4 injection through unpolished, spherical C test limiter and ohmic plasma conditions. The most striking result is that ERO modelling cannot reproduce these low deposition efficiencies using the common assumptions on sticking probabilities and physical and chemical re-erosion yields. As an explanation large re-erosion due to background plasma and possibly low "effective sticking" of returning species is applied. This has been interpreted as enhanced re-erosion of re-deposits under simultaneous impact of high ion fluxes from plasma background.

Flight-management strategies for escape from microburst encounters. M.S. Thesis - George Washington Univ.

NASA Technical Reports Server (NTRS)

Hinton, David A.

1988-01-01

An effort is underway by NASA, FAA, and industry to reduce the threat of convective microburst wind shear phenomena to aircraft. The goal is to develop and test a candidate set of strategies for recovery from inadvertent microburst encounters during takeoff. Candidate strategies were developed and evaluated using a fast-time simulation consisting of a simple point-mass performance model of a transport-category airplane and an analytical microburst model. The results indicate that the recovery strategy characteristics that best utilize available airplane energy include an initial reduction in pitch attitude to reduce the climb rate, followed by an increase in pitch up to the stick shaker angle of attack. The stick shaker angle of attack should be reached just as the airplane is exiting the microburst. The shallowest angle of climb necessary for obstacle clearance should be used. If the altitude is higher than necessary, an intentional descent to reduce the airspeed deceleration should be used. Of the strategies tested, two flight-path-angle based strategies had the highest recovery altitudes and the least sensitivity to variations in the encounter scenarios.

Balancing with Vibration: A Prelude for “Drift and Act” Balance Control

PubMed Central

Milton, John G.; Ohira, Toru; Cabrera, Juan Luis; Fraiser, Ryan M.; Gyorffy, Janelle B.; Ruiz, Ferrin K.; Strauss, Meredith A.; Balch, Elizabeth C.; Marin, Pedro J.; Alexander, Jeffrey L.

2009-01-01

Stick balancing at the fingertip is a powerful paradigm for the study of the control of human balance. Here we show that the mean stick balancing time is increased by about two-fold when a subject stands on a vibrating platform that produces vertical vibrations at the fingertip (0.001 m, 15–50 Hz). High speed motion capture measurements in three dimensions demonstrate that vibration does not shorten the neural latency for stick balancing or change the distribution of the changes in speed made by the fingertip during stick balancing, but does decrease the amplitude of the fluctuations in the relative positions of the fingertip and the tip of the stick in the horizontal plane, A(x,y). The findings are interpreted in terms of a time-delayed “drift and act” control mechanism in which controlling movements are made only when controlled variables exceed a threshold, i.e. the stick survival time measures the time to cross a threshold. The amplitude of the oscillations produced by this mechanism can be decreased by parametric excitation. It is shown that a plot of the logarithm of the vibration-induced increase in stick balancing skill, a measure of the mean first passage time, versus the standard deviation of the A(x,y) fluctuations, a measure of the distance to the threshold, is linear as expected for the times to cross a threshold in a stochastic dynamical system. These observations suggest that the balanced state represents a complex time–dependent state which is situated in a basin of attraction that is of the same order of size. The fact that vibration amplitude can benefit balance control raises the possibility of minimizing risk of falling through appropriate changes in the design of footwear and roughness of the walking surfaces. PMID:19841741

Human stick balancing: tuning Lèvy flights to improve balance control.

PubMed

Cabrera, Juan Luis; Milton, John G

2004-09-01

State-dependent, or parametric, noise is an essential component of the neural control mechanism for stick balancing at the fingertip. High-speed motion analysis in three dimensions demonstrates that the controlling movements made by the fingertip during stick balancing can be described by a Lèvy flight. The Lèvy index, alpha, is approximately 0.9; a value close to optimal for a random search. With increased skill, the index alpha does not change. However, the tails of the Lèvy distribution become broader. These observations suggest a Lèvy flight that is truncated by the properties of the nervous and musculoskeletal system; the truncation decreasing as skill level increases. Measurements of the cross-correlation between the position of the tip of the stick and the fingertip demonstrate that the role of closed-loop feedback changes with increased skill. Moreover, estimation of the neural latencies for stick balancing show that for a given stick length, the latency increases with skill level. It is suggested that the neural control for stick balancing involves a mechanism in which brief intervals of consciously generated, corrective movements alternate with longer intervals of prediction-free control. With learning the truncation of the Lèvy flight becomes better optimized for balance control and hence the time between successive conscious corrections increases. These observations provide the first evidence that changes in a Lèvy flight may have functional significance for the nervous system. This work has implications for the control of balancing problems ranging from falling in the elderly to the design of two-legged robots and earthquake proof buildings. Copyright 2004 American Institute of Physics

Theoretical and experimental research on the phenomenon of stick-slip at traction railway vehicles

NASA Astrophysics Data System (ADS)

Sebesan, Ioan; Manea, Ion; Spiroiu, Marius Adrian; Arsene, Sorin

2018-01-01

The stick-slip phenomenon may occur when the limit adhesion force is exceeded at one of the motor axles of the vehicle. In the present paper is analysed the physical phenomenon stick-slip, the conditions for its occurrence and the mechanical model recommended for the study of the phenomenon. Regarding the experimental research, it is presented the stand built in the laboratory of the Rolling Stock Department at Politehnica University of Bucharest.

What is the cost per millimetre? Challenging traditional GNSS equipment for precise geosciences and engineering applications

NASA Astrophysics Data System (ADS)

Hogg, William; Boreham, Nicholas; Benedetti, Elisa; Roberts, William

2017-04-01

Surveyors, civil and geotechnical engineers are the typical users of professional grade GNSS receiver that is capable of achieving positioning accuracies of sub-centimetre and navigation accuracies of 1-2cm. When choosing the equipment for their needs, they are often faced with a dilemma with each additional frequency, constellation and feature coming at a cost, resulting in professional GNSS equipment being regarded as high-priced specialist equipment. Indeed there are many users that have discounted GNSS on the grounds that it is too expensive and too operationally complex to warrant purchase. Having identified this situation, Nottingham Scientific Ltd (NSL) set about the development of equipment that would break down this barrier making high accuracy GNSS affordable to new users and applications and more cost effective to existing users. NSL created "STICK" which is a single frequency, multi-constellation, IMU-integrated GNSS sensor for precise movement detection of the natural and built environments and infrastructures, at approximately 1/20th of the price of a professional grade GNSS system. STICK has been developed within the context of three European Space Agency (ESA) Integrated Applications Programme Demonstration projects that use space assets to monitor the land stability and the status of different types of infrastructure, each with its own operational challenges. However through the careful selection of components, the implementation of certain operational constraints and the use of advanced statistical data processing, sub-centimetre positioning can be achieved for monitoring purposes. This paper describes STICK, the applications for which it has been developed, and the environments within which it is operating. We then explore the performance by directly comparing STICK to geodetic GNSS receivers setup in an operational, test bed environment. This test bed allows the receivers/antennas to be subjected to a three-dimensional displacement in the order of 1cm a day. The processing techniques that are used by the STICK monitoring service are described, including the GNSS data processing, the integration of IMU and the statistical analyses used to detect, quantify and report movement. By considering operational cost in terms of power, installation difficulty, remote communication and processing complexity and along with device price, we summarize the final cost to the user. Comparisons with other GNSS solutions shows whether cost truly scales with accuracy and precision. Benedetti E., L. Brack, W. Roberts, Performance Validation of Low-Cost GNSS Sensors for Land Monitoring and Hazard Mitigation, Paper presented at ION GNSS+ 2016 Session F4: Land-Based Applications 2, ION GNSS+ 2016 Proceedings (In Press) Roberts W., E. Benedetti, M. Hutchinson, G. Phipps and A. Keal, An Expendable GNSS Sensor for the Continuous Monitoring and Risk Profiling of Land and Infrastructure, Presentation at ION GNSS+ 2015 Session A5: Applications Using Consumer GNSS

Presence of neuropathic pain may explain poor performances on olfactory testing in diabetes mellitus patients.

PubMed

Brady, Shauna; Lalli, Paul; Midha, Nisha; Chan, Ayechen; Garven, Alexandra; Chan, Cynthia; Toth, Cory

2013-07-01

Olfactory dysfunction in neurodegenerative conditions such as Parkinson's syndrome and Alzheimer's disease can hallmark disease onset. We hypothesized that patients with diabetes mellitus, a condition featuring peripheral and central neurodegeneration, would have decreased olfaction abilities. We examined participants with diabetic peripheral neuropathy, participants with diabetes without diabetic peripheral neuropathy, and control participants in blinded fashion using standardized Sniffin' Sticks. Diabetic peripheral neuropathy severity was quantified using the Utah Early Neuropathy Scale. Further subcategorization of diabetic peripheral neuropathy based on presence of neuropathic pain was performed with Douleur Neuropathique 4 Questionnaires. Participants with diabetes had decreased olfactory sensitivity, impaired olfactory discrimination abilities, and reduced odor identification skills when compared with controls. However, loss of olfaction ability was, at least partially, attributed to presence of neuropathic pain on subcategory assessment, although pain severity was not associated with dysfunction. Those participants with diabetes without diabetic peripheral neuropathy and those with diabetic peripheral neuropathy without neuropathic pain had similar olfactory function as controls in general. The presence of neuropathic pain, associated with limited attention and concentration, may explain at least a portion of the olfactory dysfunction witnessed in the diabetic patient population.

Incense and joss stick making in small household factories, Thailand.

PubMed

Siripanich, S; Siriwong, W; Keawrueang, P; Borjan, M; Robson, M

2014-07-01

Incense and joss stick are generally used in the world. Most products were made in small household factories. There are many environmental and occupational hazards in these factories. To evaluate the workplace environmental and occupational hazards in small household incense and joss stick factories in Roi-Et, Thailand. Nine small household factories in rural areas of Roi-Et, Thailand, were studied. Dust concentration and small aerosol particles were counted through real time exposure monitoring. The inductively coupled plasma optical emission spectrometry (ICP-OES) was used for quantitative measurement of heavy metal residue in incense products. Several heavy metals were found in dissolved dye and joss sticks. Those included barium, manganese, and lead. Rolling and shaking processes produced the highest concentration of dust and aerosols. Only 3.9% of female workers used personal protection equipment. Dust and chemicals were major threats in small household incense and joss stick factories in Thailand. Increasing awareness towards using personal protection equipment and emphasis on elimination of environmental workplace hazards should be considered to help the workers of this industry.

Multiscale treatment of theoretical mechanisms for the protection of hydrogel surfaces from adhesive forces

NASA Astrophysics Data System (ADS)

Sokoloff, J. B.

2014-09-01

One role of a lubricant is to prevent wear of two surfaces in contact, which is likely to be the result of adhesive forces that cause a pair of asperities belonging to two surfaces in contact to stick together. Such adhesive sticking of asperities can occur both for sliding surfaces and for surfaces which are pressed together and then pulled apart. The latter situation, for example, is important for contact lenses, as prevention of sticking reduces possible damage to the cornea as the lenses are inserted and removed from the eye. Contact lenses are made from both neutral and polyelectrolyte hydrogels. It is demonstrated here that sticking of neutral hydrogels can be prevented by repulsive forces between asperities in contact, resulting from polymers attached to the gel surface but not linked with each other. For polyelectrolyte hydrogels, it is shown that osmotic pressure due to counterions, held at the interface between asperities in contact by the electrostatic attraction between the ions and the fixed charges in the gel, can provide a sufficiently strong repulsive force to prevent adhesive sticking of small-length-scale asperities.

Studies on absorption and elimination of dietary maillard reaction products.

PubMed

Förster, Anke; Kühne, Yvonne; Henle, Thomas

2005-06-01

A nine-day dietary study involving 18 healthy volunteers was performed in order to investigate the influence of nutrition on the urinary excretion of the Maillard reaction products (MRPs) fructoselysine, pyrraline, and pentosidine. From day two through day eight, most types of Maillard product-containing food had to be avoided. On day five, participants were divided into four groups, three of them receiving a test meal (pretzel sticks, brewed coffee, or custard) containing defined amounts of MRPs. The fourth group served as a control. Urine samples taken over a 24-h period were analyzed for MRPs using chromatographic means. As a result of the MRP-free diet, urinary excretion of free pyrraline and fructoselysine, which was calculated from furosine analysis, were lowered about 90%. Excretion of pentosidine decreased about 40%. Consumption of pretzel sticks and coffee on day five resulted in increased amounts of pyrraline and pentosidine in urine samples on days five to seven. Related to the supplied amounts of pyrraline, about 50% were recovered in the urine samples after ingestion of the pretzel sticks. For pentosidine, 60% of the ingested free derivative from coffee brew and 2% of the peptide-bound amino acid ingested with the bakery product were recovered in the urine samples, indicating a better bioavailability for free pentosidine compared to the protein-bound form. For peptide-bound Amadori products, no influence on the excretion was observed after ingestion of the test foods, indicating degradation in the intestine or plasma to yet-unknown metabolites. In conclusion, differences concerning the excretion rate of individual MRPs point to individual resorption and metabolic pathways. These results are of importance for the discussion of a possible (patho)physiological role of dietary advanced glycation end products (AGEs).

A black-and-red stick insect from the Philippines – observations on the external anatomy and natural history of a new species of Orthomeria

PubMed Central

Vallotto, Davide; Bresseel, Joachim; Heitzmann, Thierry; Gottardo, Marco

2016-01-01

Abstract A new stick insect of the genus Orthomeria Kirby, 1904 (Phasmatodea, Aschiphasmatidae) is described from the Philippines. Orthomeria (Orthomeria) kangi sp. n. is readily distinguished from all other congeners by the distinctive blood red colouration of the costal region of the hind wings. Major features of the external morphology of adults, eggs, and first-instar nymphs are illustrated. Locomotory attachment pads are of the smooth type with irregular microgrooves on the contact surface. An unusual condition of male terminalia is the absence of tergal thorn pads on segment 10. The male clasping organs are represented by an elongated vomer terminating in a prominent spine, and by incurved cerci featuring a bilobed apex equipped with a sharp blade-like ridge. Intraspecific variation in body colouration and hind wing length occurs in females. The new species lives at 400-650 m elevation in the surroundings of the Sablang and Tuba regions, in the Benguet Province of Luzon island. Host plants include Ficus spp. (Moraceae), and Pipturus spp. and Leucosyke spp. (Urticaceae). Observations on the mating and defensive behaviour are presented. Orthomeria (Orthomeria) catadromus (Westwood, 1859) is recognised as a junior synonym of Orthomeria (Orthomeria) pandora (Westwood, 1859), syn. n. A lectotype is designated for both species. Finally, an updated identification key to the species of the subgenus Orthomeria is provided. PMID:27006604

A black-and-red stick insect from the Philippines - observations on the external anatomy and natural history of a new species of Orthomeria.

PubMed

Vallotto, Davide; Bresseel, Joachim; Heitzmann, Thierry; Gottardo, Marco

2016-01-01

A new stick insect of the genus Orthomeria Kirby, 1904 (Phasmatodea, Aschiphasmatidae) is described from the Philippines. Orthomeria (Orthomeria) kangi sp. n. is readily distinguished from all other congeners by the distinctive blood red colouration of the costal region of the hind wings. Major features of the external morphology of adults, eggs, and first-instar nymphs are illustrated. Locomotory attachment pads are of the smooth type with irregular microgrooves on the contact surface. An unusual condition of male terminalia is the absence of tergal thorn pads on segment 10. The male clasping organs are represented by an elongated vomer terminating in a prominent spine, and by incurved cerci featuring a bilobed apex equipped with a sharp blade-like ridge. Intraspecific variation in body colouration and hind wing length occurs in females. The new species lives at 400-650 m elevation in the surroundings of the Sablang and Tuba regions, in the Benguet Province of Luzon island. Host plants include Ficus spp. (Moraceae), and Pipturus spp. and Leucosyke spp. (Urticaceae). Observations on the mating and defensive behaviour are presented. Orthomeria (Orthomeria) catadromus (Westwood, 1859) is recognised as a junior synonym of Orthomeria (Orthomeria) pandora (Westwood, 1859), syn. n. A lectotype is designated for both species. Finally, an updated identification key to the species of the subgenus Orthomeria is provided.

Matrix management: not a structure, a frame of mind.

PubMed

Barlett, C A; Ghoshal, S

1990-01-01

In many of the world's leading corporations, strategic thinking has outdistanced organizational capability. As business challenges have grown more complex over the past 20 years, most companies have avoided the trap of one-dimensional strategic responses-stick to your knitting, stick to the big markets. But many of them have fallen into a second, structural trap and adopted elaborate organizational matrices that actually impair their ability to implement sophisticated strategies. Keeping a company light on its feet strategically while still coordinating its activities across divisions, functions, even continents, means eliminating parochialism, improving communications, and weaving the decision-making process into the company's social fabric. Altering formal structure from the top down is a poor way to achieve these goals. It is easier to work from the bottom up, focusing on the attitudes and behavior of individual managers. The companies that have made best use of this focus-among them NEC, Philips, and Unilever-employ three techniques to capture the capabilities and commitment of each manager: 1. They communicate a clear, consistent corporate vision. 2. They use training and career-path management to broaden individual perspectives and increase identification with corporate goals. 3. They co-opt individual energies and ambitions into the broader corporate-wide agenda. The goal is to build a matrix of corporate values and priorities in the minds of managers and let them make the judgments and negotiate the deals that make strategy pay off.

Logistic Stick-Breaking Process

PubMed Central

Ren, Lu; Du, Lan; Carin, Lawrence; Dunson, David B.

2013-01-01

A logistic stick-breaking process (LSBP) is proposed for non-parametric clustering of general spatially- or temporally-dependent data, imposing the belief that proximate data are more likely to be clustered together. The sticks in the LSBP are realized via multiple logistic regression functions, with shrinkage priors employed to favor contiguous and spatially localized segments. The LSBP is also extended for the simultaneous processing of multiple data sets, yielding a hierarchical logistic stick-breaking process (H-LSBP). The model parameters (atoms) within the H-LSBP are shared across the multiple learning tasks. Efficient variational Bayesian inference is derived, and comparisons are made to related techniques in the literature. Experimental analysis is performed for audio waveforms and images, and it is demonstrated that for segmentation applications the LSBP yields generally homogeneous segments with sharp boundaries. PMID:25258593

The past, present, and future of hockey-stick-shaped liquid crystals

NASA Astrophysics Data System (ADS)

Choi, E.-Joon

2014-02-01

Recently, the liquid crystalline materials with a bent-core mesogen have attracted attentions because their interesting properties such as polarity and biaxiality of the mesophase. There are several types of bent-core mesogenic structures have been reported, for instance, banana-shaped, V-shaped molecules, boomerang-shaped, hockey stick-shaped, and Yshaped molecules. In this study, the liquid crystals and the reactive mesogens with the hockey-stick shaped mesogens will be described concerning with the structure-property relationship.

The mechanics of stick-slip

USGS Publications Warehouse

Byerlee, J.D.

1970-01-01

Physical mechanisms that have been proposed to explain the occurrence of stick-slip motion during frictional sliding have been examined in the light of results obtained from experiments with rocks and brittle minerals. An instability caused by sudden brittle fracture of locked regions on surfaces in contact is the most likely explanation for stick-slip during dry frictional sliding of brittle rocks at room temperature. Areas requiring further study and the uncertainties in applying the results of laboratory experiments to earthquake studies are emphasized. ?? 1970.

Modeling Analysis for NASA GRC Vacuum Facility 5 Upgrade

NASA Technical Reports Server (NTRS)

Yim, J. T.; Herman, D. A.; Burt, J. M.

2013-01-01

A model of the VF5 test facility at NASA Glenn Research Center was developed using the direct simulation Monte Carlo Hypersonic Aerothermodynamics Particle (HAP) code. The model results were compared to several cold flow and thruster hot fire cases. The main uncertainty in the model is the determination of the effective sticking coefficient -- which sets the pumping effectiveness of the cryopanels and oil diffusion pumps including baffle transmission. An effective sticking coefficient of 0.25 was found to provide generally good agreement with the experimental chamber pressure data. The model, which assumes a cold diffuse inflow, also fared satisfactorily in predicting the pressure distribution during thruster operation. The model was used to assess other chamber configurations to improve the local effective pumping speed near the thruster. A new configuration of the existing cryopumps is found to show more than 2x improvement over the current baseline configuration.

Enhancement of acoustical performance of hollow tube sound absorber

DOE Office of Scientific and Technical Information (OSTI.GOV)

Putra, Azma, E-mail: azma.putra@utem.edu.my; Khair, Fazlin Abd, E-mail: fazlinabdkhair@student.utem.edu.my; Nor, Mohd Jailani Mohd, E-mail: jai@utem.edu.my

This paper presents acoustical performance of hollow structures utilizing the recycled lollipop sticks as acoustic absorbers. The hollow cross section of the structures is arranged facing the sound incidence. The effects of different length of the sticks and air gap on the acoustical performance are studied. The absorption coefficient was measured using impedance tube method. Here it is found that improvement on the sound absorption performance is achieved by introducing natural kapok fiber inserted into the void between the hollow structures. Results reveal that by inserting the kapok fibers, both the absorption bandwidth and the absorption coefficient increase. For testmore » sample backed by a rigid surface, best performance of sound absorption is obtained for fibers inserted at the front and back sides of the absorber. And for the case of test sample with air gap, this is achieved for fibers introduced only at the back side of the absorber.« less

Design and properties of a cryogenic dip-stick scanning tunneling microscope with capacitive coarse approach control.

PubMed

Schlegel, R; Hänke, T; Baumann, D; Kaiser, M; Nag, P K; Voigtländer, R; Lindackers, D; Büchner, B; Hess, C

2014-01-01

We present the design, setup, and operation of a new dip-stick scanning tunneling microscope. Its special design allows measurements in the temperature range from 4.7 K up to room temperature, where cryogenic vacuum conditions are maintained during the measurement. The system fits into every (4)He vessel with a bore of 50 mm, e.g., a transport dewar or a magnet bath cryostat. The microscope is equipped with a cleaving mechanism for cleaving single crystals in the whole temperature range and under cryogenic vacuum conditions. For the tip approach, a capacitive automated coarse approach is implemented. We present test measurements on the charge density wave system 2H-NbSe2 and the superconductor LiFeAs which demonstrate scanning tunneling microscopy and spectroscopy data acquisition with high stability, high spatial resolution at variable temperatures and in high magnetic fields.

Swarms of repeating stick-slip glacierquakes triggered by snow loading at Mount Rainier volcano

NASA Astrophysics Data System (ADS)

Allstadt, K.; Malone, S. D.; Shean, D. E.; Fahnestock, M. A.; Vidale, J. E.

2013-12-01

We have detected over 150,000 low-frequency (~1-5 Hz) repeating earthquakes over the past decade at Mount Rainier volcano by scanning continuous seismic data from the permanent seismic network. Most of these were previously undetected due to their small size (M<1), shallow locations, and emergent waveforms. The earthquakes are located high (>3000 m) on the glacier-covered part of the edifice. They occur primarily in week- to month-long swarms of activity that strongly correlate with precipitation, namely snowfall, with a lag of about 1-2 days. Furthermore, there is a linear relationship between inter-event repeat time and the size of the subsequent event - consistent with slip-predictable stick-slip behavior. This pattern suggests that the additional load imparted by the sudden added weight of snow during winter storms triggers a temporary change from smooth aseismic sliding to seismic stick-slip basal sliding in locations where basal conditions are close to frictional instability. This sensitivity is analogous to the triggering of repeating earthquakes due to tiny overall stress changes in more traditional tectonic environments (e.g., tremor modulated by tides, dynamic triggering of repeating earthquakes). Using codawave interferometry on stacks of the repeating waveforms of the families with the most events, we found that the sources move at speeds of ~1 m/day. Using a GAMMA ground based radar interferometer, we collected spatially continuous line-of-sight velocities of several glaciers at Mount Rainier in both summer and late fall. We found that the faster parts of the glaciers also move at ~1 m/day or faster, even in late fall. Movement of the sources of these repeating earthquakes at glacial speeds indicates that the asperities are dirty patches that move with the ice rather than stationary bedrock bumps. The reappearance of some event families up to several years apart suggests that certain areas at the base of certain glaciers are prodigious producers of conditions favorable to this behavior. Stick-slip basal sliding of glaciers is supported over other potential moving shallow source mechanisms such as crevassing, unsteady fluid flow, and calving because the source must be non-destructive, highly repeatable at regular intervals, large enough to be detected on multiple stations, lack strong spectral peaks, and have a potential physical tie to the effects of winter precipitation. Identification of the source of these frequent signals offers a view of basal glacier processes, discriminates against alarming volcanic noises, and documents effects of weather on the cryosphere.

Sticking with Your University: The Importance of Satisfaction, Trust, Image, and Shared Values

ERIC Educational Resources Information Center

Schlesinger, Walesska; Cervera, Amparo; Pérez-Cabañero, Carmen

2017-01-01

In a context of increasing competition and financial difficulties for higher education institutions, alumni loyalty is a key factor for survival and success. This study tests a model derived from a relationship marketing perspective to investigate the roles of four variables (brand image, trust, satisfaction, and shared values) in the direct and…

Why Do Adolescents Gather Information or Stick to Parental Norms? Examining Autonomous and Controlled Motives behind Adolescents' Identity Style

ERIC Educational Resources Information Center

Smits, Ilse; Soenens, Bart; Vansteenkiste, Maarten; Luyckx, Koen; Goossens, Luc

2010-01-01

Self-determination theory (SDT) distinguishes between autonomous and controlled reasons for people's behavior and essentially states that beneficial effects for individuals' psychosocial adjustment will accrue when behavior is guided by autonomous (rather than controlled) motives. The present study tested this assumption in the area of…

A two-phase model for aluminized explosives on the ballistic and brisance performance

NASA Astrophysics Data System (ADS)

Kim, Wuhyun; Gwak, Min-cheol; Lee, Young-hun; Yoh, Jack J.

2018-02-01

The performance of aluminized high explosives is considered by varying the aluminum (Al) mass fraction in a heterogeneous mixture model. Since the time scales of the characteristic induction and combustion of high explosives and Al particles differ, the process of energy release behind the leading detonation wave front occurs over an extended period of time. For simulating the performance of aluminized explosives with varying Al mass fraction, HMX (1,3,5,7-tetrahexmine-1,3,5,7-tetrazocane) is considered as a base explosive when formulating the multiphase conservation laws of mass, momentum, and energy exchanges between the HMX product gases and Al particles. In the current study, a two-phase model is utilized in order to determine the effects of the Al mass fraction in a condensed phase explosive. First, two types of confined rate stick tests are considered to investigate the detonation velocity and the acceleration ability, which refers to the radial expansion velocity of the confinement shell. The simulation results of the confined rate stick test are compared with the experimental data for the Al mass fraction range of 0%-25%, and the optimal Al mass fraction is provided, which is consistent with the experimental observations. Additionally, a series of plate dent test simulations are conducted, the results of which show the same tendency as those of the experimental tests with varying Al mass fractions.

Effect of water on slip weakening of cohesive rocks during earthquakes (EMRP Division Outstanding ECS Award Lecture)

NASA Astrophysics Data System (ADS)

Violay, Marie; Alejandro Acosta, Mateo; Passelegue, François; Schubnel, Alexandre

2017-04-01

Fluids play an important role in fault zone and in earthquakes generation. Experimental studies of fault frictional properties in presence of fluid can provide unique insights into this phenomenon. Here we compare rotary shear experiments and tri-axial stick slip tests performed on cohesive silicate-bearing rocks (gabbro and granite) in the presence of fluids. Surprisingly, for both type of tests, the weakening mechanism (melting of the asperities) is hindered in the presence of water. Indeed, in rotary shear experiments, at a given effective normal stress (σn-pf), the decay in friction is more gradual and longer in the presence of pore water (32% of friction drop after 20 mm of slip) than under room humidity (41% after 20 mm of slip) and vacuum conditions (60% after 20 mm of slip). During stick slip tests, at a given effective confining pressure (Pc-pf), the dynamic shear stress drops are lower ( 30%) and slip distances were shorter ( 30 to 40%) in the presence of high pressure pore water (Pc=95 MPa; Pf=25 MPa) than under room humidity conditions (Pc=70 MPa; Pf=0 MPa). Thermal modeling of the asperity contacts under load shows that the presence of fluids cools the asperities and delays the formation of melt patches, increasing weakening duration.

How Can I Lose Weight Safely?

MedlinePlus

... people find that eating a couple of small snacks throughout the day helps them to make healthy choices at meals. Stick a couple of healthy snacks (carrot sticks, whole-grain pretzels, or a piece ...

Peel-and-Stick: Mechanism Study for Efficient Fabrication of Flexible/Transparent Thin-film Electronics

NASA Astrophysics Data System (ADS)

Lee, Chi Hwan; Kim, Jae-Han; Zou, Chenyu; Cho, In Sun; Weisse, Jeffery M.; Nemeth, William; Wang, Qi; van Duin, Adri C. T.; Kim, Taek-Soo; Zheng, Xiaolin

2013-10-01

Peel-and-stick process, or water-assisted transfer printing (WTP), represents an emerging process for transferring fully fabricated thin-film electronic devices with high yield and fidelity from a SiO2/Si wafer to various non-Si based substrates, including papers, plastics and polymers. This study illustrates that the fundamental working principle of the peel-and-stick process is based on the water-assisted subcritical debonding, for which water reduces the critical adhesion energy of metal-SiO2 interface by 70 ~ 80%, leading to clean and high quality transfer of thin-film electronic devices. Water-assisted subcritical debonding is applicable for a range of metal-SiO2 interfaces, enabling the peel-and-stick process as a general and tunable method for fabricating flexible/transparent thin-film electronic devices.

Peel-and-stick: mechanism study for efficient fabrication of flexible/transparent thin-film electronics.

PubMed

Lee, Chi Hwan; Kim, Jae-Han; Zou, Chenyu; Cho, In Sun; Weisse, Jeffery M; Nemeth, William; Wang, Qi; van Duin, Adri C T; Kim, Taek-Soo; Zheng, Xiaolin

2013-10-10

Peel-and-stick process, or water-assisted transfer printing (WTP), represents an emerging process for transferring fully fabricated thin-film electronic devices with high yield and fidelity from a SiO2/Si wafer to various non-Si based substrates, including papers, plastics and polymers. This study illustrates that the fundamental working principle of the peel-and-stick process is based on the water-assisted subcritical debonding, for which water reduces the critical adhesion energy of metal-SiO2 interface by 70 ~ 80%, leading to clean and high quality transfer of thin-film electronic devices. Water-assisted subcritical debonding is applicable for a range of metal-SiO2 interfaces, enabling the peel-and-stick process as a general and tunable method for fabricating flexible/transparent thin-film electronic devices.

Wind-Tunnel Development of Ailerons for the Curtiss XP-60 Airplanem Special Report

NASA Technical Reports Server (NTRS)

Rogallo, F. M.; Lowry, John G.

1942-01-01

An investigation was made in the LWAL 7- by 10-foot tunnel of internally balanced, sealed ailerons for the Curtiss XP-60 airplane. Ailerons with tabs and. with various amounts of balance were tested. Stick forces were estimated for several aileron arrangements including an arrangement recommended for the airplane. Flight tests of the recommended arrangement are discussed briefly in an appendix, The results of the wind-tunnel and flight tests indicate that the ailerons of large or fast airplanes may be satisfactorily balanced by the method developed.

Listening in on Friction: Stick-Slip Acoustical Signatures in Velcro

NASA Astrophysics Data System (ADS)

Hurtado Parra, Sebastian; Morrow, Leslie; Radziwanowski, Miles; Angiolillo, Paul

2013-03-01

The onset of kinetic friction and the possible resulting stick-slip motion remain mysterious phenomena. Moreover, stick-slip dynamics are typically accompanied by acoustic bursts that occur temporally with the slip event. The dry sliding dynamics of the hook-and-loop system, as exemplified by Velcro, manifest stick-slip behavior along with audible bursts that are easily micrphonically collected. Synchronized measurements of the friction force and acoustic emissions were collected as hooked Velcro was driven at constant velocity over a bed of looped Velcro in an anechoic chamber. Not surprising, the envelope of the acoustic bursts maps well onto the slip events of the friction force time series and the intensity of the bursts trends with the magnitude of the difference of the friction force during a stick-slip event. However, the analysis of the acoustic emission can serve as a sensitive tool for revealing some of the hidden details of the evolution of the transition from static to kinetic friction. For instance, small acoustic bursts are seen prior to the Amontons-Coulomb threshold, signaling precursor events prior to the onset of macroscopically observed motion. Preliminary spectral analysis of the acoustic emissions including intensity-frequency data will be presented.

A comparison of successful and unsuccessful attempts in maximal bench pressing.

PubMed

van den Tillaar, Roland; Ettema, Gertjan

2009-11-01

This study was designed to compare the differences in EMG and kinematics between successful and unsuccessful attempts in bench pressing at one repetition maximum (1RM) in recreational weight-trained subjects. We hypothesized that failure occurs during the sticking period (the period during which there is a temporary reduction in movement velocity). Eleven male subjects (age = 21.9 +/- 1.8 yr, mass = 80.0 +/- 11.2 kg, height = 1.79 +/- 0.08 m) with at least 1 yr of bench press training experience participated in this study. They performed attempts at 1RM and 1RM + 2.5 kg in bench press during which kinematics and muscle activity were recorded. One successful attempt and one unsuccessful attempt were used for further analysis. Both attempts showed the same sticking period, but only half of the failures occurred during that period. The main differences in the kinematics occurred during the sticking period. Muscle activity, in contrast, showed the same pattern in both attempts and only differed during the downward and the start of the upward movement of the lift. The sticking period occurs in both successful and unsuccessful attempts in maximal bench press. However, failure does not always occur during the sticking period.

A Novel Tactile Sensor with Electromagnetic Induction and Its Application on Stick-Slip Interaction Detection

PubMed Central

Liu, Yanjie; Han, Haijun; Liu, Tao; Yi, Jingang; Li, Qingguo; Inoue, Yoshio

2016-01-01

Real-time detection of contact states, such as stick-slip interaction between a robot and an object on its end effector, is crucial for the robot to grasp and manipulate the object steadily. This paper presents a novel tactile sensor based on electromagnetic induction and its application on stick-slip interaction. An equivalent cantilever-beam model of the tactile sensor was built and capable of constructing the relationship between the sensor output and the friction applied on the sensor. With the tactile sensor, a new method to detect stick-slip interaction on the contact surface between the object and the sensor is proposed based on the characteristics of friction change. Furthermore, a prototype was developed for a typical application, stable wafer transferring on a wafer transfer robot, by considering the spatial magnetic field distribution and the sensor size according to the requirements of wafer transfer. The experimental results validate the sensing mechanism of the tactile sensor and verify its feasibility of detecting stick-slip on the contact surface between the wafer and the sensor. The sensing mechanism also provides a new approach to detect the contact state on the soft-rigid surface in other robot-environment interaction systems. PMID:27023545

Effect of punch tip geometry and embossment on the punch tip adherence of a model ibuprofen formulation.

PubMed

Roberts, Matthew; Ford, James L; MacLeod, Graeme S; Fell, John T; Smith, George W; Rowe, Philip H; Dyas, A Mark

2004-07-01

The sticking of a model ibuprofen-lactose formulation with respect to compaction force, punch tip geometry and punch tip embossment was assessed. Compaction was performed at 10, 25 or 40 kN using an instrumented single-punch tablet press. Three sets of 'normal' concave punches were used to evaluate the influence of punch curvature and diameter. The punches were 10, 11 and 12 mm in diameter, respectively. The 10-mm punch was embossed with a letter 'A' logo to assess the influence of an embossment on sticking. Flat-faced punches (12.5 mm) were used for comparison with the concave tooling. Surface profiles (Taylor Hobson Talysurf 120) of the upper punch faces were obtained to evaluate the surface quality of the tooling used. Following compaction, ibuprofen attached to the upper punch face was quantified by spectroscopy. Increasing punch curvature from flat-faced punches to concave decreased sticking. Altering punch diameter of the concave punches had no effect on sticking when expressed as microg mm(-2). The embossed letter 'A' logo increased sticking considerably owing to the probable concentration of shear stresses at the lateral faces of the embossed logo.

Ice Cream Stick Math.

ERIC Educational Resources Information Center

Paddock, Cynthia

1992-01-01

Described is a teaching technique which uses the collection of ice cream sticks as a means of increasing awareness of quantity in a self-contained elementary special class for students with learning disabilities and mild mental retardation. (DB)

JIGGER STICK USED IN ERECTION. Shown on highline, direction of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

JIGGER STICK USED IN ERECTION. Shown on highline, direction of view is probably to the north - South Fork Trinity River Bridge, State Highway 299 spanning South Fork Trinity River, Salyer, Trinity County, CA

Green-fuel-mediated synthesis of self-assembled NiO nano-sticks for dual applications—photocatalytic activity on Rose Bengal dye and antimicrobial action on bacterial strains

NASA Astrophysics Data System (ADS)

Iyyappa Rajan, P.; Vijaya, J. Judith; Jesudoss, S. K.; Kaviyarasu, K.; Kennedy, L. John; Jothiramalingam, R.; Al-Lohedan, Hamad A.; Vaali-Mohammed, Mansoor-Ali

2017-08-01

With aim of promoting the employability of green fuels in the synthesis of nano-scaled materials with new kinds of morphologies for multiple applications, successful synthesis of self-assembled NiO nano-sticks was achieved through a 100% green-fuel-mediated hot-plate combustion reaction. The synthesized NiO nano-sticks show excellent photocatalytic activity on Rose Bengal dye and superior antibacterial potential towards both Gram-positive and Gram-negative bacteria.

A note of effects of kiln stick thickness and air velocity on drying time of southern pine 2 by 4 and 2 by 6 lumber

Treesearch

E.W. Price; P. Koch

1982-01-01

To dry to 10% moisture content, 4- and 6-inch-wide lumber 1.75 inch thick required about 13.7 h (including 4 3/4-h kiln warmup time) in 5-ft-wide loads at 260 F (wet-bulb temperature was 180 F) on 1.00-inch-thick sticks with air cross-circulated at 1,000 fpm. If air velocity is increased to 1,400 fpm or stick thickness increased to 1.5 inches, kiln time required to...

Design of one-kilometer-long antenna sticks and support structure for a geosynchronous satellite

NASA Astrophysics Data System (ADS)

Freeman, Janet Elizabeth

This study develops a preliminary structural design for three one-kilometer-long antenna sticks and an antenna support structure for a geosynchronous earth-imaging satellite. On each of the antenna sticks is mounted a linear array of over 16,000 antenna elements. The antenna sticks are parallel to each other, and are spaced 1 km apart so that they form the corners of an imaginary triangular tube. This tube is spinning about its long axis. Antenna performance requires that the position of each antenna element be known to an accuracy of 0.5 cm, and that the spacecraft's spin axis be parallel to the earth's spin axis within one degree. Assuming that the position of each joint on each antenna stick is known, the antenna sticks are designed as beams under a uniformly distributed acceleration (due to spacecraft spin) to meet the displacement accuracy requirements for the antenna elements. Both a thin-walled round tube and a three-longeron double-laced truss are considered for the antenna stick structure. A spacecraft spinrate is chosen by considering the effects of environmental torques on the precession of a simplified spacecraft. A preliminary truss-like support structure configuration is chosen, and analyzed in quasi-static equilibrium with control thrusters firing to estimate the axial loads in the structural members. The compressive loads found by this analysis are used to design the support structure members to be buckling-critical three-longeron double-laced truss columns. Some tension-only members consisting of Kevlar cord are included in the design to eliminate the need for bulkier members. The lateral vibration modes of the individual structural members are found by conventional analysis -- the fundamental frequencies are as low as 0.0066 Hz. Finite element dynamic analyses of the structure in free vibration confirm that simplified models of the structure and members can be used to determine the structural modes and natural frequencies for design purposes.

Waffle production: influence of batter ingredients on sticking of fresh egg waffles at baking plates-Part I: effect of starch and sugar components.

PubMed

Huber, Regina; Schoenlechner, Regine

2017-05-01

Fresh egg waffles are a sweet convenience product typically baked from eggs, water, sugar, flour, fat, leavening agents, emulsifiers, preservatives, and flavors. In industrial production, waffles are baked continuously in high amounts of up to 200 kg raw material per hour. Therefore, it is important that the waffles do not stick onto the baking plates, which can cause significant product loss and increased costs due to interruption of the baking process, required cleaning procedures, and restarting of the energy-consuming start-up phase. Sticking of waffles is greatly influenced not only by baking plate material, release agent, baking temperature, and time, but also by the batter ingredients. In this study, effects of different starches and sugar components were investigated. Within the selected starches, potato starch demonstrated the highest effects on increasing waffle stability and releasing properties compared to wheat and lupine flour (less than 7% sticking waffles). Rice flour performed worst, with almost 50% of sticking waffles. Most of these waffles were broken during take-off, due to their crumbly texture. Within the sugar components, glycerine was better suitable than sorbitol and crystal sugar was superior compared to powdered sugar. They required less take-off force. It could be demonstrated that waffles with increased stability and texture were those that showed the least number of sticking waffles, thus the main aim of batter ingredients was to improve waffle quality. Waffle quality was influenced by batter parameters, significant correlations could be found, for example, a positive correlation between pH- and L-value, negative correlations between pH- and a-value, or density and aw-value. This resulted in significant correlations with take-off-force, which was correlated with L*- and b*-value (negative) and positive to a*-value. Sticking behavior was strongly associated with b*-value (positive) and to a*-value (negative).

Olfaction in People with Down Syndrome: A Comprehensive Assessment across Four Decades of Age.

PubMed

Cecchini, Maria Paola; Viviani, Dario; Sandri, Marco; Hähner, Antje; Hummel, Thomas; Zancanaro, Carlo

2016-01-01

Down syndrome (DS) shows neuropathology similar to Alzheimer disease, which presents olfactory impairment. Previous work showed olfactory impairment in DS, but a comprehensive evaluation of olfactory function in DS is lacking. We investigated a large number (n = 56; M = 31, F = 25) DS participants (age range18-57y) using the "Sniffin' Sticks" Extended test. This comprises three subtests (threshold, discrimination, and identification) yielding a global score (TDI) defining normosmia, hyposmia, and functional anosmia. To the best of our knowledge, this is the second largest group of DS people investigated for olfactory function ever. Age- and sex matched euploid individuals (n = 53) were the control. In DS, TDI was lower (16.7±5.13 vs. 35.4±3.74; P<0.001), with DS people performing worse in any subtests (P<0.001 for all); 27 DS participants showed functional anosmia (i.e., TDI<16). In DS, age was weakly and negatively correlated with TDI (r = -0.28, P = 0.036) and identification (r = -0.34, P = 0.012). When participants were stratified in young adults (18-29y) and older adults (30-61y), a significant effect of age was found for identification in both DS (young adults, 8.3±2.58; older adults, 6.9±2.99; P = 0.031) and control (young-adult, 14.3±1.18, older adult, 13.0±1.54; P = 0.016). Olfactory function is overall severely impaired in DS people and may be globally impaired at relatively young age, despite of reportedly normal smell. However, specificity of this olfactory profile to DS should be considered with some caution because cognition was not evaluated in all DS participants and comparison with a control group of non-DS individuals having cognitive disabilities was lacking. Further study is required to longitudinally assess olfactory dysfunction in DS and to correlate it with brain pathology.

Interior of Tunnel No. 1356, Stick Pile Tunnel showing timber ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior of Tunnel No. 1356, Stick Pile Tunnel showing timber framing and missing posts, looking northeast. - Western Maryland Railway, Cumberland Extension, Pearre to North Branch, from WM milepost 125 to 160, Pearre, Washington County, MD

76 FR 62423 - National Institute on Deafness and Other Communication Disorders; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

...., Rockville, MD 20852, (Telephone Conference Call). Contact Person: Melissa Stick, PhD, MPH, Chief, Scientific...., Rockville, MD 20852, (Telephone Conference Call). Contact Person: Melissa Stick, PhD, MPH, Chief, Scientific...

Longitudinal Stability and Control Characteristics of a B-29 Airplane with a Booster Incorporated in the Elevator Control System to Provide Various Stick-Force and Control-Rate Characteristics

NASA Technical Reports Server (NTRS)

Mathews, Charles W.; Talmage, Donald B.; Whitten, James B.

1948-01-01

The longitudinal stability and control characteristics of a B-29 airplane have been measured with a booster incorporated in the elevator control system. Tests were made to determine the effects on the handling qualities of the test airplane of variations in pilots control-force gradients as well as the effects of variations in the maximum rate of control motion supplied by the booster system.

OH-13H Gross Weight Increase/XM-1 Armament Kit Performance Test

DTIC Science & Technology

1963-06-01

in hovering performance beyond thai obtained in the Air Force Performance lest of the 0H-I3H, de - scribed in MFFTC-TR...The airspeed schedule used during the climbs was the same as that developed during the OH-!3H performance test de - sci iüed in AFrrC-TR-57-12...siight de - crease in control response was indicated by a small amount of feedback through the unboosted collective stick. Level Flight

Effects of stick dynamics on helicopter flying qualities

NASA Technical Reports Server (NTRS)

Watson, Douglas C.; Schroeder, Jeffery A.

1990-01-01

An experiment that investigated the influence of typical helicopter force-feel system dynamics on roll-axis handling qualities was conducted in concurrent ground and inflight simulations. Variations in lateral control natural frequency and damping ratio, effected by changes in inertia and damping, were evaluated in a disturbance-rejection task. Pilot ratings indicated a preference for low-inertia feel systems, although measured performance was relatively constant over the range of stick characteristics. Force-sensing was compared with position sensing as the input to the control system. Force-sensing improved performance but did not improve pilot ratings. Overall, the results indicated that control-stick dynamics, at least within a reasonable range, did not have a significant effect on pilot-vehicle performance. However, the physical effort required to maintain a desired pilot/manipulator bandwidth became objectionable as the stick inertia increased beyond 5-7 lbm, which was reflected in the pilot ratings and comments.

Constellation Stick Figures Convey Information about Gravity and Neutrinos

NASA Astrophysics Data System (ADS)

Mc Leod, David Matthew; Mc Leod, Roger David

2008-10-01

12/21/98, at America's Stonehenge, DMM detected, and drew, the full stick-figure equivalent of Canis Major, CM, as depicted by our Wolf Clan leaders, and many others. Profound, foundational physics is implied, since this occurred in the Watch House there, hours before the ``model rose.'' Similar configurations like Orion, Osiris of ancient Egypt, show that such figures are projected through solid parts of the Earth, as two-dimensional equivalents of the three-dimensional star constellations. Such ``sticks'' indicate that ``line equivalents'' connect the stars, and the physical mechanism projects outlines detectable by traditional cultures. We had discussed this ``flashlight'' effect, and recognized some of its implications. RDM states that the flashlight is a strong, distant neutrino source; the lines represent neutrinos longitudinally aligned in gravitational excitation, opaque, to earthbound, transient, transversely excited neutrinos. ``Sticks'' represent ``graviton'' detection. Neutrinos' longitudinal alignment accounts for the weakness of gravitational force.

Light-stick: A problem of marine pollution in Brazil.

PubMed

Cesar-Ribeiro, Caio; Rosa, Helena Costi; Rocha, Daniele Oliveira; Dos Reis, Camila Galli Baldini; Prado, Tabata Sarti; Muniz, Daniela Hernandes Coimbra; Carrasco, Raquel; Silva, Flávia Milão; Martinelli-Filho, José Eduardo; Palanch-Hans, Maria Fernanda

2017-04-15

Light-sticks are used as bait in surface long-line fishing, to capture swordfish and other large pelagic predators. When discharged in the ocean, it may reach the beaches. The traditional Brazilian community of Costa dos Coqueiros, Bahia, use light-sticks as a medicine for rheumatism, vitiligo and mycoses. It may affect the marine life when its content leak in the open ocean. This work evaluated and identified the acute and chronic toxicity of the light-stick. A high acute toxicity was observed in the mobility/mortality of Artemia sp.; in the fertilization of sea urchin eggs, and a high chronic toxicity in the development of the pluteus larvae of the same sea urchin. The main compounds that probably caused toxicity were the volatiles such as the fluorescent PAH and oxidants such as the hydrogen peroxide. Its disposal in the open ocean is a potential threat for marine life. Copyright © 2017 Elsevier Ltd. All rights reserved.

Simulating stick-slip failure in a sheared granular layer using a physics-based constitutive model

DOE PAGES

Lieou, Charles K. C.; Daub, Eric G.; Guyer, Robert A.; ...

2017-01-14

In this paper, we model laboratory earthquakes in a biaxial shear apparatus using the Shear-Transformation-Zone (STZ) theory of dense granular flow. The theory is based on the observation that slip events in a granular layer are attributed to grain rearrangement at soft spots called STZs, which can be characterized according to principles of statistical physics. We model lab data on granular shear using STZ theory and document direct connections between the STZ approach and rate-and-state friction. We discuss the stability transition from stable shear to stick-slip failure and show that stick slip is predicted by STZ when the applied shearmore » load exceeds a threshold value that is modulated by elastic stiffness and frictional rheology. Finally, we also show that STZ theory mimics fault zone dilation during the stick phase, consistent with lab observations.« less

Flight Investigation of Control-stick Vibration of the YG-1B Autogiro

NASA Technical Reports Server (NTRS)

Bailey, F J , Jr

1940-01-01

As a preliminary step in an investigation of control-stick vibration in direct-control autogiros, the periodic variations in the moments transmitted through the control system of a YG-1B autogiro were recorded in flight. The results of the measurements are presented in the form of coefficients of Fourier series expressing the varying part of the lateral and the longitudinal moments acting between rotor and fuselage at the control trunnions. The most important component of the variation in stick force was found to have frequency of three times the rotor speed and an amplitude that rose from negligible values at tip-speed ratio below 0.20 to +/-5.2 pounds longitudinally and +/-3.2 pounds laterally at tip-speed ratios of 0.35. Variations in stick force at all other frequencies were small in comparison with those at three times the rotor speed.

Ice Hockey Players Using a Weighted Implement when Training on the Ice: A Randomized Control Trial

ERIC Educational Resources Information Center

Stark, Timothy W.; Tvoric, Bojan; Walker, Bruce; Noonan, Dom; Sibla, Janeene

2009-01-01

The purpose of this study was to investigate the potential for improving hockey players' performance using a weighted implement on the ice. Forty-eight players were tested using a grip strength dynamometer. They also were assessed on their abilities to stick-handle. The participants were randomly placed into a control or research group. The…

How far will a behaviourally flexible invasive bird go to innovate?

PubMed Central

Logan, Corina J.

2016-01-01

Behavioural flexibility is considered a key factor in the ability to adapt to changing environments. A traditional way of characterizing behavioural flexibility is to determine whether individuals invent solutions to novel problems, termed innovativeness. Great-tailed grackles are behaviourally flexible in that they can change their preferences when a task changes using existing behaviours; however, it is unknown how far they will go to invent solutions to novel problems. To begin to answer this question, I gave grackles two novel tests that a variety of other species can perform: stick tool use and string pulling. No grackle used a stick to access out-of-reach food, even after seeing a human demonstrate the solution. No grackle spontaneously pulled a vertically oriented string, but one did pull a horizontally oriented string twice. Additionally, a third novel test was previously conducted on these individuals and it was found that no grackle spontaneously dropped stones down a platform apparatus to release food, but six out of eight did become proficient after training. These results support the idea that behavioural flexibility is a multi-faceted trait because grackles are flexible, but not particularly innovative. This contradicts the idea that behavioural flexibility and innovativeness are interchangeable terms. PMID:27429781

Dynamic Friction Performance of a Pneumatic Cylinder with Al2O3 Film on Cylinder Surface.

PubMed

Chang, Ho; Lan, Chou-Wei; Wang, Hao-Xian

2015-11-01

A friction force system is proposed for accurately measuring friction force and motion properties produced by reciprocating motion of piston in a pneumatic cylinder. In this study, the proposed system is used to measure the effects of lubricating greases of different viscosities on the friction properties of pneumatic cylinder, and improvement of stick-slip motion for the cylinder bore by anodizing processes. A servo motor-driven ball screw is used to drive the pneumatic cylinder to be tested and to measure the change in friction force of the pneumatic cylinder. Experimental results show, that under similar test conditions, the lubricating grease with viscosity VG100 is best suited for measuring reciprocating motion of the piston of pneumatic cylinder. The wear experiment showed that, in the Al2O3 film obtained at a preset voltage 40 V in the anodic process, the friction coefficient and hardness decreased by 55% and increased by 274% respectively, thus achieving a good tribology and wear resistance. Additionally, the amplitude variation in the friction force of the pneumatic cylinder wall that received the anodizing treatment was substantially reduced. Additionally, the stick-slip motion of the pneumatic cylinder during low-speed motion was substantially improved.

Generation rates and emission factors of particulate matter and particle-bound polycyclic aromatic hydrocarbons of incense sticks.

PubMed

Lung, Shih-Chun Candice; Hu, Shu-Chuan

2003-02-01

The generation rates and emission factors of particulate matter and associated polycyclic aromatic hydrocarbons (PAHs) from incense burning were assessed in a laboratory setting. The differences among different segments of the same stick, among different sticks of the same kind of incense, and between two kinds of manually made Chih-Chen incense sticks (A and B) were evaluated. Joss sticks were burned inside a 44 cm long elutriator; personal environmental monitors fitted into the top of the elutriator were used to take PM2.5 and PM10 samples of incense smoke. Samples were analyzed for PAHs by gas chromatography-flame ionization Detector. It was found that particle and associated PAHs were generated approximately at 561 microg/min (geometric standard deviation (GSD) = 1.1) and 0.56 microg/min (GSD = 1.1) from Incense A, and at 661 microg/min (GSD = 1.7) and 0.46 microg/min (GSD = 1.3) from Incense B, respectively. One gram of Incense A emitted about 19.8 mg (GSD = 1.1) particulate matter and 17.1 microg (GSD = 1.2) particulate-phase PAHs, while one gram of Incense B produced around 43.6 mg (GSD = 1.1) of particles and 25.2 microg (GSD = 1.2) of particle-bound PAHs. There were significant differences in emissions between Incenses A and B, although they belong to the same class of incense. A 10-20% variability in emissions was observed in the main part of the manually produced stick, and a larger variation was found at both tips of the combustible part.

Reducing pain from palatal needle stick by topical anesthetics: a comparative study between two lidocaine/prilocaine substances.

PubMed

Al-Melh, Manal Abu; Andersson, Lars

2008-01-01

The aims of this study were to compare the topical anesthetic effect of two different preparations of lidocaine/prilocaine, cream versus thermosetting gel, on the reduction of pain from needle stick in the palate. The study also compared the subjects' preferences with regard to the substances. Two preparations of 2.5% lidocaine/2.5% prilocaine topical anesthetic agents were applied on the palatal mucosa in the canine region bilaterally and blindly to forty subjects. In the same visit, the cream (EMLA) was applied on one side and the thermosetting gel (Oraqix) on the other side, simultaneously. After that, a needle stick was given on each side using a 27-gauge needle inserted to bone contact through the palatal mucosa every second minute during a ten-minute period. Immediately after the needle stick, the subjects started recording their findings using a verbal scale, a visual analogue scale, and a questionnaire form. Significant differences were set at p < 0.05. Both substances reduced or eliminated pain from needle stick in the palate. Significant differences in pain reduction were observed between the two substances. EMLA reduced pain significantly better than Oraqix. With regard to comfort, taste, anesthetic effect, personal preference, and recommendation, the majority of the subjects favored the EMLA cream to the thermosetting gel. No adverse effects were reported by the subjects. Although both topical anesthetic agents are similar in content, the cream seemed to be preferred by the patients and reduced pain from needle stick in the palate significantly better than the thermosetting gel.

Behavior of healthcare workers after injuries from sharp instruments.

PubMed

Adib-Hajbaghery, Mohsen; Lotfi, Mohammad Sajjad

2013-09-01

Injuries with sharps are common occupational hazards for healthcare workers. Such injuries predispose the staff to dangerous infections such as hepatitis B, C and HIV. The present study was conducted to investigate the behaviors of healthcare workers in Kashan healthcare centers after needle sticks and injuries with sharps in 2012. A cross-sectional study was conducted on 298 healthcare workers of medical centers governed by Kashan University of Medical Sciences. A questionnaire was used in this study. The first part included questions about demographic characteristics. The second part of the questionnaire consisted of 16 items related to the sharp instrument injuries. For data analysis, descriptive and analytical statistics (chi-square, ANOVA and Pearson correlation coefficient) SPSS version 16.0 software was used. From a total of 298 healthcare workers, 114 (38.3%) had a history of injury from needles and sharp instruments in the last six months. Most needle stick and sharp instrument injuries had occurred among the operating room nurses and midwifes; 32.5% of injuries from sharp instruments occurred in the morning shift. Needles were responsible for 46.5% of injuries. The most common actions taken after needle stick injuries were compression (27.2%) and washing the area with soap and water (15.8%). Only 44.6% of the injured personnel pursued follow-up measures after a needle stick or sharp instrument injury. More than a half of the healthcare workers with needle stick or sharp instrument injury had refused follow-up for various reasons. The authorities should implement education programs along with protocols to be implemented after needle stick injuries or sharps.

Healthy Weight: Healthy Weight Loss Starts With a Plan You Can Stick To

MedlinePlus

... Healthy Weight Healthy Weight Loss Starts With a Plan You Can Stick To Past Issues / Summer 2009 ... based on regular physical activity and an eating plan that is balanced, healthy, and easy to follow. ...

Diagnostic value of combined assessment of olfaction and sustantia nigra hyperechogenicity for Parkinson's disease.

PubMed

López Hernández, N; García Escrivá, A; Shalabi Benavent, M

2015-10-01

Hyposmia and substantia nigra hyperechogenicity (SN+) are characteristic markers of Parkinson's disease (PD), although their diagnostic value in isolation may be limited. We evaluated the combined prevalence of both disorders in patients diagnosed with PD and assessed their diagnostic yield compared to a sample with essential tremor (ET) and another group of healthy subjects. Patients diagnosed with PD and ET and treated in our outpatient clinic were enrolled. Olfaction was assessed using the "Sniffin' Sticks" odour identification test (SS-12) and hyperechogenicity of the substantia nigra (SN+) was assessed by transcranial duplex ultrasound. A total of 98 subjects were analysed, comprising 30 with PD, 21 with ET, and 47 controls. The respective prevalence rates of hyposmia (SS-12 < 8) and SN+ (area > .24cm(2)) were 70% and 83.3% in PD, 33.3% and 9.5% in ET, and 17% and 10.6% in controls. Both markers were present in 63% of patients with PD, none of the patients with ET, and only 2 of the controls. Combined use of substantia nigra sonography and olfactory testing with SS-12, two rapid, safe, and accessible tests, was more specific than each isolated marker for distinguishing patients with PD from patients with ET and control subjects. Since both markers have been described in very early phases of PD, combined use may be helpful in providing early diagnosis of PD. Copyright © 2013 Sociedad Española de Neurología. Published by Elsevier España, S.L.U. All rights reserved.

Validating electromagnetic walking stick rail surface crack measuring systems : final report.

DOT National Transportation Integrated Search

2016-06-01

A series of field studies were undertaken to evaluate electromagnetic walking stick systems and their ability to measure the depth : of damage from surface breaking cracks. In total, four railroads, and four suppliers participated in the project. The...

1. VIEW OF EAST FRONT OF BREAKER, WITH SCALE STICK, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. VIEW OF EAST FRONT OF BREAKER, WITH SCALE STICK, SHOWING FOUNDATIONS OF RETAIL SCALES IN FOREGROUND, LOOKING WEST - Marvine Colliery, Breaker No. 2, West side Boulevard Avenue, between East Parker Street & Route 380, Scranton, Lackawanna County, PA

The physics of a popsicle stick bomb

NASA Astrophysics Data System (ADS)

Sautel, Jérémy; Bourges, Andréane; Caussarieu, Aude; Plihon, Nicolas; Taberlet, Nicolas

2017-10-01

Popsicle sticks can be interlocked in the so-called "cobra weave" to form a chain under tension. When one end of the chain is released, the sticks rapidly disentangle, forming a traveling wave that propagates down the chain. In this paper, the properties of the traveling front are studied experimentally, and classical results from the theory of elasticity allow for a dimensional analysis of the height and speed of the traveling wave. The study presented here can help undergraduate students familiarize themselves with experimental techniques of image processing, and it also demonstrates the power of dimensional analysis and scaling laws.

The use of wooden sticks to assess stream ecosystem functioning: comparison with leaf breakdown rates.

PubMed

Arroita, Maite; Aristi, Ibon; Flores, Lorea; Larrañaga, Aitor; Díez, Joserra; Mora, Juanita; Romaní, Anna M; Elosegi, Arturo

2012-12-01

Breakdown of organic matter is a key process in streams and rivers, and thus, it has potential to assess functional impairment of river ecosystems. Because the litter-bag method commonly used to measure leaf breakdown is time consuming and expensive, several authors proposed to measure breakdown of wooden sticks instead. Nevertheless, currently there is little information on the performance of wooden sticks versus that of leaves. We compared the breakdown of tongue depressors made of untreated poplar wood, to that of six common leaf species in two large streams in the Basque Country (northern Spain), one polluted and the other unpolluted. Breakdown rates ranged from 0.0011 to 0.0120 day(-1), and were significantly lower in the polluted stream. Wooden sticks performed very similarly to leaves, but were less affected by flood-induced physical abrasion. The ranking of the materials according to their breakdown rate was consistent, irrespective of the stream. The experiments with leaves were 10 times more costly for breakdown rate, 4 times if we include the rest of the variables measured. Therefore wooden sticks offer a promising tool to assess river ecosystem functioning, although more research is necessary to define the thresholds for ecosystem functional impairment. Copyright © 2012 Elsevier B.V. All rights reserved.

Double-well dynamics of noise-driven control activation in human intermittent control: the case of stick balancing.

PubMed

Zgonnikov, Arkady; Lubashevsky, Ihor

2015-11-01

When facing a task of balancing a dynamic system near an unstable equilibrium, humans often adopt intermittent control strategy: Instead of continuously controlling the system, they repeatedly switch the control on and off. Paradigmatic example of such a task is stick balancing. Despite the simplicity of the task itself, the complexity of human intermittent control dynamics in stick balancing still puzzles researchers in motor control. Here we attempt to model one of the key mechanisms of human intermittent control, control activation, using as an example the task of overdamped stick balancing. In doing so, we focus on the concept of noise-driven activation, a more general alternative to the conventional threshold-driven activation. We describe control activation as a random walk in an energy potential, which changes in response to the state of the controlled system. By way of numerical simulations, we show that the developed model captures the core properties of human control activation observed previously in the experiments on overdamped stick balancing. Our results demonstrate that the double-well potential model provides tractable mathematical description of human control activation at least in the considered task and suggest that the adopted approach can potentially aid in understanding human intermittent control in more complex processes.

Xenosurveillance reflects traditional sampling techniques for the identification of human pathogens: A comparative study in West Africa

PubMed Central

Fakoli, Lawrence S.; Bolay, Kpehe; Bolay, Fatorma K.; Diclaro, Joseph W.; Brackney, Doug E.; Stenglein, Mark D.; Ebel, Gregory D.

2018-01-01

Background Novel surveillance strategies are needed to detect the rapid and continuous emergence of infectious disease agents. Ideally, new sampling strategies should be simple to implement, technologically uncomplicated, and applicable to areas where emergence events are known to occur. To this end, xenosurveillance is a technique that makes use of blood collected by hematophagous arthropods to monitor and identify vertebrate pathogens. Mosquitoes are largely ubiquitous animals that often exist in sizable populations. As well, many domestic or peridomestic species of mosquitoes will preferentially take blood-meals from humans, making them a unique and largely untapped reservoir to collect human blood. Methodology/Principal findings We sought to take advantage of this phenomenon by systematically collecting blood-fed mosquitoes during a field trail in Northern Liberia to determine whether pathogen sequences from blood engorged mosquitoes accurately mirror those obtained directly from humans. Specifically, blood was collected from humans via finger-stick and by aspirating bloodfed mosquitoes from the inside of houses. Shotgun metagenomic sequencing of RNA and DNA derived from these specimens was performed to detect pathogen sequences. Samples obtained from xenosurveillance and from finger-stick blood collection produced a similar number and quality of reads aligning to two human viruses, GB virus C and hepatitis B virus. Conclusions/Significance This study represents the first systematic comparison between xenosurveillance and more traditional sampling methodologies, while also demonstrating the viability of xenosurveillance as a tool to sample human blood for circulating pathogens. PMID:29561834

Xenosurveillance reflects traditional sampling techniques for the identification of human pathogens: A comparative study in West Africa.

PubMed

Fauver, Joseph R; Weger-Lucarelli, James; Fakoli, Lawrence S; Bolay, Kpehe; Bolay, Fatorma K; Diclaro, Joseph W; Brackney, Doug E; Foy, Brian D; Stenglein, Mark D; Ebel, Gregory D

2018-03-01

Novel surveillance strategies are needed to detect the rapid and continuous emergence of infectious disease agents. Ideally, new sampling strategies should be simple to implement, technologically uncomplicated, and applicable to areas where emergence events are known to occur. To this end, xenosurveillance is a technique that makes use of blood collected by hematophagous arthropods to monitor and identify vertebrate pathogens. Mosquitoes are largely ubiquitous animals that often exist in sizable populations. As well, many domestic or peridomestic species of mosquitoes will preferentially take blood-meals from humans, making them a unique and largely untapped reservoir to collect human blood. We sought to take advantage of this phenomenon by systematically collecting blood-fed mosquitoes during a field trail in Northern Liberia to determine whether pathogen sequences from blood engorged mosquitoes accurately mirror those obtained directly from humans. Specifically, blood was collected from humans via finger-stick and by aspirating bloodfed mosquitoes from the inside of houses. Shotgun metagenomic sequencing of RNA and DNA derived from these specimens was performed to detect pathogen sequences. Samples obtained from xenosurveillance and from finger-stick blood collection produced a similar number and quality of reads aligning to two human viruses, GB virus C and hepatitis B virus. This study represents the first systematic comparison between xenosurveillance and more traditional sampling methodologies, while also demonstrating the viability of xenosurveillance as a tool to sample human blood for circulating pathogens.

Temporary Thermocouple Attachment for Thermal/Vacuum Testing at Non-Extreme Temperatures

NASA Technical Reports Server (NTRS)

Ungar, Eugene K.; Wright, Sarah E.

2016-01-01

Post-test examination and data analysis that followed a two week long vacuum test showed that numerous self-stick thermocouples became detached from the test article. The thermocouples were reattached with thermally conductive epoxy and the test was repeated to obtain the required data. Because the thermocouple detachment resulted in significant expense and rework, it was decided to investigate the temporary attachment methods used around NASA and to perform a test to assess their efficacy. The present work describes the original test and the analysis that showed that the thermocouples had become detached, temporary thermocouple attachment methods assessed in the retest and in the thermocouple attachment test, and makes a recommendation for attachment methods for future tests.

Analgesic effects of breast-feeding or pacifier use with maternal holding in term infants.

PubMed

Phillips, Raylene M; Chantry, Caroline J; Gallagher, Michael P

2005-01-01

First, to compare analgesic effects of breast-feeding versus pacifier use in newborn infants undergoing blood collection via heel sticks. Second, to compare analgesic effects of pacifier use with maternal holding versus nonmaternal holding. A prospective, randomized, controlled trial. Normal newborn nursery at academic teaching hospital. Full-term breast-feeding infants scheduled for routine newborn screening blood test via heel stick (n = 96). Interventions.-Infants randomized to 3 groups for analgesia: 1) breast-feeding, 2) pacifier use while held by mothers, 3) pacifier use while held by research assistants (nonmothers). Primary outcome was crying (percent of infants who cried during the procedure and mean percent of procedure time that infants cried). Secondary outcomes were physiologic measures. Fewer breast-feeding infants cried than infants using a pacifier while held by nonmothers both during the procedure (69% vs 100%, P < .01) and after the procedure (28% vs 60%, P = .03). Those infants crying during the procedure cried for less time if held by their mothers either breast-feeding (33%, P < .01) or using a pacifier (45%, P = .03) than those using a pacifier while being held by nonmothers (66%). Breast-feeding is more analgesic than pacifier use with nonmaternal holding. Maternal holding with either breast-feeding or pacifier use is more analgesic than nonmaternal holding with pacifier use, suggesting that maternal holding itself has an analgesic effect. Breast-feeding and maternal holding should be considered as pain-control measures for the neonate during heel-stick procedures.

Flight Investigation to Improve the Dynamic Longitudinal Stability and Control-Feel Characteristics of the P-63A-1 Airplane (AAF No. 42-68889) with Closely Balanced Experimental Elevators

NASA Technical Reports Server (NTRS)

Johnson, Harold I.

1946-01-01

Results of flight tests of a control-feel aid presented. This device consisted of a spring and dashpot connected in series between the control stick and airplane structure. The device was tested in combination with an experimental elevator and bobweight which had given unsatisfactory dynamic stability and control-feel characteristics in previous tests. The control-feel aid effected marked improvement in both the control-feel characteristics and the control-feel dynamic longitudinal stability of the airplane.

[Tetanus risk assessment in the older outpatients: Usefulness of the "Tétanos Quick Stick ®"?].

PubMed

Nicolaï, D; Farcet, A; Molines, C; Delalande, G; Retornaz, F

2015-05-01

Tetanus is a serious disease, which could be potentially lethal. All cases are observed in patients inadequately immunized. The immunochromatographic tests (including Tetanos quick Stick(®) [TQS]) have demonstrated their efficiency in emergency setting. The aim of our study was to assess the usefulness of these tests in elderly outpatients seen in ambulatory settings. This prospective study included patients aged 65 years and over who presented to the outpatients' clinic of the Gerontologic Departmental Center (Marseille). A TQS and a self-administered questionnaire to assess risk factors for tetanus were performed. One hundred and twenty-two patients were studied. The prevalence of positive TQS was 66%. Patients have an average of 2.5 risk factors for tetanus. Negative TQS was observed in 35% of patients who had seen their general practitioner for a wound during the previous year. Elderly patients accumulate several risk factors regardless of age and lifestyle. While physicians are familiar with the vaccine recommendations, they are often faced with the difficulty of assessing patient's status based only on the patient's interview, which is frequently not reliable. The implementation of immunochromatographic tests in general practice could help physicians in the management of patients at risk for tetanus. Copyright © 2014 Société nationale française de médecine interne (SNFMI). Published by Elsevier SAS. All rights reserved.

Preliminary Results of Stability and Control Investigation of the Bell X-5 Research Airplane

NASA Technical Reports Server (NTRS)

Finch, Thomas W; Briggs, Donald W

1953-01-01

During the acceptance tests of the Bell X-5 airplane, measurements of the static stability and control characteristics and horizontal-tail loads were obtained by the NACA High-Speed Flight Research Station. The results of the stability and control measurements are presented in this paper. A change in sweep angle between 20 deg and 59 deg had a minor effect on the longitudinal trim, with a maximum change of about 2.5 deg in elevator deflection being required at a Mach number near 0.85; however, sweeping the wings produced a total stick-force change of about 40 pounds. At low Mach numbers there was a rapid increase in stability at high normal-force coefficients for both 20 0 and 1100 sweepback, whereas a condition of neutral stability existed for 58 0 sweepback at high normal-force coefficients. At Mach numbers near 0.8 there was an instability at normal-force coefficients above 0.5 for all sweep angles tested. In the low normal-force-coefficient range a high degree of stability resulted in high stick forces which limited the maximum load factors attainable in the demonstration flights to values under 5g for all sweep angles at a Mach number near 0.8 and an altitude of 12,000 feet. The aileron effectiveness at 200 sweepback was found to be low over the Mach number range tested.

Long Term Performance Retention Test Using High Power COTS NiCd and NiMH Cells

NASA Technical Reports Server (NTRS)

Hall, Dan; Darcy, Eric; Strangways, Brad; Nelson, Tim

2003-01-01

This slide presentation reviews the tests and results for performance retention of high powered commercial off the shelf (COTS) NiCd, and NiMH cells. Electromechanical actuators for space flight requires short duration high power batteries. The concern is that NiCd battery designs demonstrate an unfavorable power degradation after long periods of inactivity. Cycling can recover some of the decay, but this reduces the readiness that these batteries must have. Two 5-cell SubC stick test batteries ere chosen using NiCd and NiMH were tested and then the differences for charge maintenance were compared.

Effect of stress perturbation on frictional instability: an experimental study

NASA Astrophysics Data System (ADS)

Yuanmin, H.; Shengli, M.

2017-12-01

We have performed a series of frictional experiments with direct shear configuration of three granite blocks by using a servo-controlled biaxial loading machine. In the experiments, a small- amplitude sine wave is modulated to shear and normal loading in order to study the effects of stress perturbation on stick-slip instability. The main results are as follows. Under the constant average normal stress and the constant loading point velocity in shear direction, the sample shows regular stick-slip behavior. After the stress perturbation is modulated, the correlation between the timing of stick-slip events and the perturbation increases with increasing the perturbation amplitude, and stress drop and interval time of stick-slip events tend to be discrete. This results imply that the change in Coulomb stress caused by stress perturbation may obviously change not only the occurrence time of earthquakes but also the earthquake magnitude. Both shear and normal stress perturbation can affect the stick-slip behavior, shear stress perturbation can only change the driving stress along fault, while the normal stress perturbation can change the contact state of asperities on the fault, so it's effect is more obviously. The stress perturbation can obviously affect acoustic emission (AE) activity during fault friction, which can trigger some AE events so that AE activity before stick-slip becomes stronger and occurs earlier. The perturbation in shear stress is more evident than that in normal stress in affecting AE activity, so we should not only pay attention to the magnitude of Coulomb stress changes caused by the perturbation, but also try to distinguish the stress changes are the shear stress changes or the normal stress changes, when study the effect of stress perturbation on fault friction.

Single-stick tunneled central venous access using the jugular veins in infants weighing less than 5 kg.

PubMed

Lindquester, Will S; Hawkins, C Matthew; Monroe, Eric J; Gill, Anne E; Shivaram, Giridhar M; Seidel, F Glen; Lungren, Matthew P

2017-11-01

Despite the demonstrated feasibility of the single-stick technique in the femoral vein, its use in neonates and infants for placing central lines in internal and external jugular veins has not been reported. Describe and assess the safety and efficacy of tunneled jugular central venous catheter placement performed under ultrasound (US) and fluoroscopic guidance in neonates and infants weighing <5 kg using the single-stick technique at three tertiary pediatric hospitals. Thirty-three children weighing less than 5 kg received tunneled central venous access in either internal or external jugular veins using the single-stick technique. Patient history, procedural records and clinical follow-up documents were retrospectively reviewed. Complication rates were compared to those of 41 patients receiving single-stick femoral central lines. Technical complications occurred during one (3.0%) jugular placement with the patient having a failed right-side attempt with subsequent successful left-side placement. The catheters did not last the entire course of treatment in three (9.1%) patients with jugular lines. One patient had the catheter removed due to concern for infection, one catheter was accidentally removed during dressing changes, and one catheter was displaced and subsequently exchanged. Of patients receiving femoral central lines, 1 (2.4%) had a technical complication and 5 catheters (12.2%) did not last the entire course of treatment. The placement of tunneled central venous catheters in neonates/infants <5 kg is safe and technically feasible using the internal/external jugular vein via the single-stick technique. By theoretically reducing the risks of catheter infection by avoiding the diaper area and thrombosis by using larger veins, it may be preferable in certain patient populations.

The hockey-stick method to estimate evening dim light melatonin onset (DLMO) in humans.

PubMed

Danilenko, Konstantin V; Verevkin, Evgeniy G; Antyufeev, Viktor S; Wirz-Justice, Anna; Cajochen, Christian

2014-04-01

The onset of melatonin secretion in the evening is the most reliable and most widely used index of circadian timing in humans. Saliva (or plasma) is usually sampled every 0.5-1 hours under dim-light conditions in the evening 5-6 hours before usual bedtime to assess the dim-light melatonin onset (DLMO). For many years, attempts have been made to find a reliable objective determination of melatonin onset time either by fixed or dynamic threshold approaches. The here-developed hockey-stick algorithm, used as an interactive computer-based approach, fits the evening melatonin profile by a piecewise linear-parabolic function represented as a straight line switching to the branch of a parabola. The switch point is considered to reliably estimate melatonin rise time. We applied the hockey-stick method to 109 half-hourly melatonin profiles to assess the DLMOs and compared these estimates to visual ratings from three experts in the field. The DLMOs of 103 profiles were considered to be clearly quantifiable. The hockey-stick DLMO estimates were on average 4 minutes earlier than the experts' estimates, with a range of -27 to +13 minutes; in 47% of the cases the difference fell within ±5 minutes, in 98% within -20 to +13 minutes. The raters' and hockey-stick estimates showed poor accordance with DLMOs defined by threshold methods. Thus, the hockey-stick algorithm is a reliable objective method to estimate melatonin rise time, which does not depend on a threshold value and is free from errors arising from differences in subjective circadian phase estimates. The method is available as a computerized program that can be easily used in research settings and clinical practice either for salivary or plasma melatonin values.

Stick-slip as a monitor of rates, states and frictional properties along thrusts in sand wedges

NASA Astrophysics Data System (ADS)

Rosenau, Matthias; Santimano, Tasca; Ritter, Malte; Oncken, Onno

2014-05-01

We developed a sandbox setup which allows monitoring the push of the moving backwall indenting a layer of sand. Depending on the ratio between indenter compliancy versus strain weakening of the granular material, wedge deformation shows unstable slip marked by force drops of various sizes and at multiple temporal scales. Basically we observe long-period slip instabilities related to strain localization during the formation of new thrusts, intermediate-period slip instabilities related to reactivation of existing thrusts and short-period slip instabilities related to the stick-slip mechanism of slip accumulation along "seismic" faults. Observed stick-slip is characterized by highly correlated size and frequency ("regular stick-slip") and is sensitive to integrated normal load, slip rate and frictional properties along the active thrust(s). By independently constraining the frictional properties using a ring-shear tester, we infer the integrated normal loads on the active faults from the stick-slip events and benchmark the results against a model calculating the normal loads from the wedge geometry. This way we are able to monitor rates, states and frictional properties along thrusts in sand wedges at unprecedented detail. As an example of application, a kinematic analysis of the stick slip events in the sandbox demonstrates how slip rates along thrusts vary systematically within accretion cycles although the kinematic boundary condition is stationary. Accordingly transient fault slip rates may accelerate up to twice the long-term convergence rate during formation of new thrusts and decelerate in the post-thrust formation stage in a non-linear way. Applied to nature this suggests that fault slip rate variations at the thousand-year time scale might be attributable to the elasticity of plates and material weakening rather than changes in plate velocities.

Sticks and Stones Will Break My Bones but Failure Feedback May Not Hurt Me: Gender Differences in the Relationship between Achievement Motive, Coping Strategies and Environmental Mastery

ERIC Educational Resources Information Center

Tan, Ser Hong; Pang, Joyce S.

2012-01-01

This study investigates the processes through which achievement motivation guides the selection of coping strategies which in turn affects environmental mastery post-failure feedback. Seventy-six college students received failure feedback after completing a professional aptitude test. Findings showed that gender moderated the relationship between…

Why Sticks and Carrots Are Only for Animals: An Exploratory Study on Self-Worth in Higher Education

ERIC Educational Resources Information Center

Ramdhani, J.; Nkoane, M.

2010-01-01

The question that needs to be asked is what is motivating employees at higher education institution and why do people act in the way that they do? This article sought to test the following statement: There exists within the context of higher education an organizational culture based on the premise of self worth. Various theories of motivation have…

Frictional conditions between alloy AA6060 aluminium and tool steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wideroee, Fredrik; Welo, Torgeir

The frictional conditions in the new process of screw extrusion of aluminium have been investigated. The contact behaviour between the aluminum alloy and the tool steel in the extruder is vital for understanding the extrusion process. Using a compressive-rotational method for frictional measurements the conditions for unlubricated sticking friction between aluminum alloy AA6060 and tool steel at different combinations of temperatures and pressures have been investigated. In this method the samples in the form of disks are put under hydrostatic pressure while simultaneously being rotated at one end. Pins made from contrast material have been inserted into the samples tomore » measure the deformation introduced. This approach along with 3D simulations form a method for determining the frictional conditions. The paper describes the test method and the results. It was found that the necessary pressure for sticking to occur between the aluminum AA6060 and the different parts of the extruder is heavily influenced by the temperature.« less

Characterization System of Multi-pixel Array TES Microcalorimeter

NASA Astrophysics Data System (ADS)

Yoshimoto, Shota; Maehata, Keisuke; Mitsuda, Kazuhisa; Yamanaka, Yoshihiro; Sakai, Kazuhiro; Nagayoshi, Kenichiro; Yamamoto, Ryo; Hayashi, Tasuku; Muramatsu, Haruka

We have constructed characterization system for 64-pixel array transition-edge sensor (TES) microcalorimeter using a 3He-4He dilution refrigerator (DR) with the cooling power of 60 µW at a temperature of 100 mK. A stick equipped with 384 of Manganin wires was inserted into the refrigerator to perform characteristic measurements of 64-pixel array TES microcalorimeter and superconducting quantum interference device (SQUID) array amplifiers. The stick and Manganin wires were thermally anchored at temperatures of 4 and 1 K with sufficient thermal contact. The cold end of the Manganin wires were thermally anchored and connected to CuNi clad NbTi wires at 0.7 K anchor. Then CuNi clad NbTi wires were wired to connectors placed on the holder mounted on the cold stage attached to the base plate of the mixing chamber. The heat flow to the cold stage through the installed wires was estimated to be 0.15 µW. In the operation test the characterization system maintained temperature below 100 mK.

Curiosity & Connections

ERIC Educational Resources Information Center

Lim, Kien H.

2014-01-01

Retaining mathematical knowledge is difficult for many students, especially for those who learn facts and procedures without understanding the meanings underlying the symbols and operations. Repeated practice may be necessary for developing skills but is unlikely to make conceptual ideas stick. An idea is more likely to stick if students are…

The Vernier Caliper and Significant Figures.

ERIC Educational Resources Information Center

Oberhofer, E. S.

1985-01-01

Misconceptions occur because the caliper is often read with the same significant figures as a meter stick; however, the precision of the vernier caliper is greater than the precision of a meter stick. Clarification of scale reading, precision of both tools, and significant figures are discussed. (JN)

Paint-Stirrer Submarine

ERIC Educational Resources Information Center

Young, Jocelyn; Hardy, Kevin

2007-01-01

In this article, the authors discuss a unique and challenging laboratory exercise called, the paint-stir-stick submarine, that keeps the students enthralled. The paint-stir-stick submarine fits beautifully with the National Science Education Standards Physical Science Content Standard B, and with the California state science standards for physical…

Hardwood log grading scale stick improved

Treesearch

M. D. Ostrander; G. H. Englerth

1953-01-01

In February 1952 the Northeastern Forest Experiment Station described ( Research Note 13) a new log-grading scale stick developed by the Station for use as a visual aid in grading hardwood factory logs. It was based on the U. S. Forest Products Laboratory's log-grade specifications.

Stick-slip friction and ageing in Velcro®

NASA Astrophysics Data System (ADS)

Mariani, Lisa; Angiolillo, Paul

2014-03-01

The mesoscopic hook and loop system of Velcro® provides a model of stick-slip friction that exhibits behavior reminiscent of results seen in nanoscale model systems. The friction is linearly dependent on contact area and independent of driving velocity. Morever, there is a power law dependence of the friction on loading, with exponent between 1/4 and 1/3. Furthermore, the evolution of stick-slip to more smooth sliding, as controlled by contact area, is also noted. These transition predictions follow power law profiles, as well, with respect to increasing contact area. Thus, the hook-and-loop system shows to be a good mesoscale model system of stick-slip friction and provides a link between nanoscale and macroscale friction. Through an investigation into the ageing of the hooks in the system, the data suggests that the hooks age during the shearing regime and take a characteristic time to return to initial attachment strength. Additionally, there does not appear to be a significant affect of ageing on the kinetic friction experienced by the system.

Ballasting pipeline moving in horizontal well as method of control sticking phenomenon

NASA Astrophysics Data System (ADS)

Toropov, V. S.; Toropov, E. S.

2018-05-01

The mechanism of the phenomenon of sticking a pipeline moving in a well while pulled by the facility horizontal directional drilling is investigated. A quantitative evaluation of the force arising from sticking is given. At the same time, the working hypothesis takes a view of the combined effect of adhesion and friction interactions as the reasons that cause this phenomenon. As a measure to control the occurrence of sticking and to reduce the resistance force to movement of the pipeline in the well, several methods of ballasting the working pipeline are proposed, depending on the profile of the well and the ratio of the length of the curved sections of the inlet and outlet and the straight horizontal sections of the profile. It is shown that for crossings, which profile contains an extended horizontal section, it is possible to partially fill the pipeline with water to achieve zero buoyancy, and for crossings with curvature along the entire profile, the ballasting efficiency will be minimal.

Understanding and controlling regime switching in molecular diffusion

NASA Astrophysics Data System (ADS)

Hallerberg, S.; de Wijn, A. S.

2014-12-01

Diffusion can be strongly affected by ballistic flights (long jumps) as well as long-lived sticking trajectories (long sticks). Using statistical inference techniques in the spirit of Granger causality, we investigate the appearance of long jumps and sticks in molecular-dynamics simulations of diffusion in a prototype system, a benzene molecule on a graphite substrate. We find that specific fluctuations in certain, but not all, internal degrees of freedom of the molecule can be linked to either long jumps or sticks. Furthermore, by changing the prevalence of these predictors with an outside influence, the diffusion of the molecule can be controlled. The approach presented in this proof of concept study is very generic and can be applied to larger and more complex molecules. Additionally, the predictor variables can be chosen in a general way so as to be accessible in experiments, making the method feasible for control of diffusion in applications. Our results also demonstrate that data-mining techniques can be used to investigate the phase-space structure of high-dimensional nonlinear dynamical systems.

Using glow stick chemistry for biological imaging.

PubMed

Tseng, Jen-Chieh; Bailey, Dyane; Tupper, Tanya; Kung, Andrew L

2014-08-01

This study describes an imaging strategy based on glow stick chemistry to non-invasively image oxidative stress and reactive oxygen species (ROS) production in living animals. Upon stimulation, phagocytes produce toxic levels of ROS to kill engulfed microorganisms. The mitochondrial respiratory chain continually generates low levels of superoxide (O2·(-)) that serve as a source for generation of downstream ROS, which function as regulatory signaling intermediaries. A ROS-reacting substrate, 2-methyl-6-[4-methoxyphenyl]-3,7-dihydroimidazo[1,2-a]pyrazin-3-one hydrochloride, was used as the chemical energy donor for generating energy transfer luminescence in phagosomes and mitochondria. Using targeted photoluminescent dyes with specific subcellular localization that serve as chemical energy recipients, our imaging data demonstrate proof-of-concept for using glow stick chemistry to visualize ROS production associated with phagocytosis and mitochondrial respiration in living mice. Glow stick imaging is a complementary hybrid of chemiluminescence and photoluminescence imaging, capable of generating red or far-red emission for deep tissue imaging.

Waffle production: influence of batter ingredients on sticking of waffles at baking plates-Part II: effect of fat, leavening agent, and water.

PubMed

Huber, Regina; Schoenlechner, Regine

2017-05-01

Fresh egg waffles are continuously baked in tunnel baking ovens in industrial scale. Waffles that partly or fully stick to the baking plates cause significant product loss and increased costs. The aim of this study was, therefore, to investigate the effect of different recipe ingredients on the sticking behavior of waffles. In this second part, ingredients investigated were different leavening agents (sodium acid pyrophosphate, ammonium bicarbonate, magnesium hydroxide carbonate, or monocalcium phosphate), different fat sources (rapeseed oil, cocos fat, butter, or margarine), and different water sources (tap water 12°dH and distilled water). Within the different types of fats, solid fats with high amount of short-chain fatty acids (cocos fat or butter) decreased the number of sticking waffles compared to liquid oils (rapeseed oil). Regarding leavening agents, magnesium hydroxide carbonate and ammonium bicarbonate were superior to sodium acid pyrophosphate or monocalcium phosphate. Between the two water sources, effects were small.

Observations of premonitory acoustic emission and slip nucleation during a stick slip experiment in smooth faulted Westerly granite

USGS Publications Warehouse

Thompson, B.D.; Young, R.P.; Lockner, D.A.

2005-01-01

To investigate laboratory earthquakes, stick-slip events were induced on a saw-cut Westerly granite sample by triaxial loading at 150 MPa confining pressure. Acoustic emissions (AE) were monitored using an innovative continuous waveform recorder. The first motion of each stick slip was recorded as a large-amplitude AE signal. These events source locate onto the saw-cut fault plane, implying that they represent the nucleation sites of the dynamic failure stick-slip events. The precise location of nucleation varied between events and was probably controlled by heterogeneity of stress or surface conditions on the fault. The initial nucleation diameter of each dynamic instability was inferred to be less than 3 mm. A small number of AE were recorded prior to each macro slip event. For the second and third slip events, premonitory AE source mechanisms mimic the large scale fault plane geometry. Copyright 2005 by the American Geophysical Union.

Task-level strategies for human sagittal-plane running maneuvers are consistent with robotic control policies.

PubMed

Qiao, Mu; Jindrich, Devin L

2012-01-01

The strategies that humans use to control unsteady locomotion are not well understood. A "spring-mass" template comprised of a point mass bouncing on a sprung leg can approximate both center of mass movements and ground reaction forces during running in humans and other animals. Legged robots that operate as bouncing, "spring-mass" systems can maintain stable motion using relatively simple, distributed feedback rules. We tested whether the changes to sagittal-plane movements during five running tasks involving active changes to running height, speed, and orientation were consistent with the rules used by bouncing robots to maintain stability. Changes to running height were associated with changes to leg force but not stance duration. To change speed, humans primarily used a "pogo stick" strategy, where speed changes were associated with adjustments to fore-aft foot placement, and not a "unicycle" strategy involving systematic changes to stance leg hip moment. However, hip moments were related to changes to body orientation and angular speed. Hip moments could be described with first order proportional-derivative relationship to trunk pitch. Overall, the task-level strategies used for body control in humans were consistent with the strategies employed by bouncing robots. Identification of these behavioral strategies could lead to a better understanding of the sensorimotor mechanisms that allow for effective unsteady locomotion.

Effects of Subthalamic Stimulation on Olfactory Function in Parkinson Disease.

PubMed

Cury, Rubens Gisbert; Carvalho, Margarete de Jesus; Lasteros, Fernando Jeyson Lopez; Dias, Alice Estevo; Dos Santos Ghilardi, Maria Gabriela; Paiva, Anderson Rodrigues Brandão; Coutinho, Artur Martins; Buchpiguel, Carlos Alberto; Teixeira, Manoel J; Barbosa, Egberto Reis; Fonoff, Erich Talamoni

2018-06-01

Olfactory dysfunction is a nonmotor symptom of Parkinson disease (PD) associated with reduction in quality of life. There is no evidence on whether improvements in olfaction after subthalamic deep brain stimulation (STN-DBS) may be directly attributable to motor improvement or whether this reflects a direct effect of DBS on olfactory brain areas. The aim of the present study was to evaluate the effect of DBS on olfactory function in PD, as well as to explore the correlation between these changes and changes in motor symptoms and brain metabolism. Thirty-two patients with PD were screened for STN-DBS. Patients were evaluated before and 1 year after surgery. Primary outcome was the change in olfactory function (Sniffin' Sticks odor-identification test [SST]) after surgery among the patients with hyposmia at baseline. Secondary outcomes included the relationship between motor outcomes and olfactory changes and [ 18 F]fluorodeoxyglucose-positron emission tomography analysis between subgroups with improvement versus no improvement of smell. STN-DBS improved SST after surgery (preoperative SST, median 7.3 ± 2.4 vs. postoperative SST, median 8.2 ± 2.1; P = 0.045) in a subset of patients among 29 of 32 patients who presented with hyposmia at baseline. The improvement in SST was correlated with DBS response (r = 0.424; P = 0.035). There was also an increase in glucose metabolism in the midbrain, cerebellum, and right frontal lobe in patients with SST improvement (P < 0.001). STN-DBS improves odor identification in a subset of patients with PD. Motor improvement together with changes in the brain metabolism may be linked to this improvement. Copyright © 2018 Elsevier Inc. All rights reserved.

Spatio-temporal foreshock activity during stick-slip experiments of large rock samples

NASA Astrophysics Data System (ADS)

Tsujimura, Y.; Kawakata, H.; Fukuyama, E.; Yamashita, F.; Xu, S.; Mizoguchi, K.; Takizawa, S.; Hirano, S.

2016-12-01

Foreshock activity has sometimes been reported for large earthquakes, and has been roughly classified into the following two classes. For shallow intraplate earthquakes, foreshocks occurred in the vicinity of the mainshock hypocenter (e.g., Doi and Kawakata, 2012; 2013). And for intraplate subduction earthquakes, foreshock hypocenters migrated toward the mainshock hypocenter (Kato, et al., 2012; Yagi et al., 2014). To understand how foreshocks occur, it is useful to investigate the spatio-temporal activities of foreshocks in the laboratory experiments under controlled conditions. We have conducted stick-slip experiments by using a large-scale biaxial friction apparatus at NIED in Japan (e.g., Fukuyama et al., 2014). Our previous results showed that stick-slip events repeatedly occurred in a run, but only those later events were preceded by foreshocks. Kawakata et al. (2014) inferred that the gouge generated during the run was an important key for foreshock occurrence. In this study, we proceeded to carry out stick-slip experiments of large rock samples whose interface (fault plane) is 1.5 meter long and 0.5 meter wide. After some runs to generate fault gouge between the interface. In the current experiments, we investigated spatio-temporal activities of foreshocks. We detected foreshocks from waveform records of 3D array of piezo-electric sensors. Our new results showed that more than three foreshocks (typically about twenty) had occurred during each stick-slip event, in contrast to the few foreshocks observed during previous experiments without pre-existing gouge. Next, we estimated the hypocenter locations of the stick-slip events, and found that they were located near the opposite end to the loading point. In addition, we observed a migration of foreshock hypocenters toward the hypocenter of each stick-slip event. This suggests that the foreshock activity observed in our current experiments was similar to that for the interplate earthquakes in terms of the spatio-temporal pattern. This work was supported by NIED research project "Development of monitoring and forecasting technology for crustal activity", JSPS KAKENHI Grant Number 23340131, and MEXT of Japan, under its Earthquake and Volcano Hazards Observation and Research Program.

The Effects of Elevator Rate Limiting and Stick Dynamics on Longitudinal Pilot-Induced Oscillations

DTIC Science & Technology

1997-03-01

systems) were modeled as follows: 1 _ 0.1251Ks in / lb Fe, [0.6 K, , 26 K,] The equation is written in shorthand notation where: [,co] = (S2 + 2 o(s + con2... equation : (5,. , 0.125/K , in / lb Fe [0.6K,, 26K,,] where [c0n] (S2 + 2 (ons + (0n2) (a)= (s + a) The nominal stick, feel system 1, had a damping...System Description The HAVE GRIP stick dynamics (feel system) were modeled by the following equation : _es_ O.12 5 K s in / lb Fes [0.6, 26K j,] The

Immediate bonding properties of universal adhesives to dentine.

PubMed

Muñoz, Miguel Angel; Luque, Issis; Hass, Viviane; Reis, Alessandra; Loguercio, Alessandro Dourado; Bombarda, Nara Hellen Campanha

2013-05-01

To evaluate the dentine microtensile bond strength (μTBS), nanoleakage (NL), degree of conversion (DC) within the hybrid layer for etch-and-rinse and self-etch strategies of universal simplified adhesive systems. forty caries free extracted third molars were divided into 8 groups for μTBS (n=5), according to the adhesive and etching strategy: Clearfil SE Bond [CSE] and Adper Single Bond 2 [SB], as controls; Peak Universal Adhesive System, self-etch [PkSe] and etch-and-rinse [PkEr]; Scotchbond Universal Adhesive, self-etch [ScSe] and etch-and-rinse [ScEr]; All Bond Universal, self-etch [AlSe] and etch-and-rinse [AlEr]. After restorations were constructed, specimens were stored in water (37°C/24h) and then resin-dentine sticks were prepared (0.8mm(2)). The sticks were tested under tension at 0.5mm/min. Some sticks from each tooth group were used for DC determination by micro-Raman spectroscopy or nanoleakage evaluation (NL). The pH for each solution was evaluated using a pH metre. Data were analyzed with one-way ANOVA and Tukey's test (α=0.05). For μTBS, only PkSe and PkEr were similar to the respective control groups (p>0.05). AlSe showed the lowest μTBS mean (p<0.05). For NL, ScEr, ScSe, AlSe, and AlEr showed the lowest NL similar to control groups (p<0.05). For DC, only ScSe showed lower DC than the other materials (p<0.05). Performance of universal adhesives was shown to be material-dependent. The results indicate that this new category of universal adhesives used on dentine as either etch-and-rinse or self-etch strategies were inferior as regards at least one of the properties evaluated (μTBS, NL and DC) in comparison with the control adhesives (CSE for self-etch and SB for etch-and-rinse). Copyright © 2013 Elsevier Ltd. All rights reserved.

Shear Bond Strength between Fiber-Reinforced Composite and Veneering Resin Composites with Various Adhesive Resin Systems.

PubMed

AlJehani, Yousef A; Baskaradoss, Jagan K; Geevarghese, Amrita; AlShehry, Marey A; Vallittu, Pekka K

2016-07-01

The aim of this research was to evaluate the shear bond strength of different laboratory resin composites bonded to a fiber-reinforced composite substrate with some intermediate adhesive resins. Mounted test specimens of a bidirectional continuous fiber-reinforced substrate (StickNet) were randomly assigned to three equal groups. Three types of commercially available veneering resin composites - BelleGlass®, Sinfony®, and GC Gradia® were bonded to these specimens using four different adhesive resins. Half the specimens per group were stored for 24 hours; the remaining were stored for 30 days. There were 10 specimens in the test group (n). The shear bond strengths were calculated and expressed in MPa. Data were analyzed statistically, and variations in bond strength within each group were additionally evaluated by calculating the Weibull modulus. Shear bond values of those composites are influenced by the different bonding resins and different indirect composites. There was a significant difference in the shear bond strengths using different types of adhesive resins (p = 0.02) and using different veneering composites (p < 0.01). Belle-Glass® had the highest mean shear bond strength when bonded to StickNet substrate using both Prime & Bond NT and OptiBond Solo Plus. Sinfony® composite resin exhibited the lowest shear bond strength values when used with the same adhesive resins. The adhesive mode of failure was higher than cohesive with all laboratory composite resins bonded to the StickNet substructure at both storage times. Water storage had a tendency to lower the bond strengths of all laboratory composites, although the statistical differences were not significant. Within the limitations of this study, it was found that bonding of the veneering composite to bidirectional continuous fiber-reinforced substrate is influenced by the brand of the adhesive resin and veneering composite. © 2015 by the American College of Prosthodontists.

Investigation of Spinning and Tumbling Characteristics of a 1/20-Scale Model of the Consolidated Vultee XFY-1 Airplane in the Free-Spinning Tunnel, TED No. NACA DE 370

NASA Technical Reports Server (NTRS)

Lee, Henry A.

1952-01-01

An investigation has been conducted in the Langley 20-foot free-spinning tunnel on a l/20-scale model of the Consolidated Vultee XFY-1 airplane with a windmilling propeller simulated to determine the effects of control setting and movements upon the erect spin and recovery characteristics for a range of airplane-loading conditions. The effects on the model's spin-recovery characteristics of removing the lower vertical tail, removing the gun pods, and fixing the rudders at neutral were also investigated briefly. The investigation included determination of the size parachute required for emergency recovery from demonstration spins. The tumbling tendencies of the model were also investigated. Brief static force tests were made to determine the aerodynamic characteristics in pitch at high angles of attack. The investigation indicated that the spin and recovery characteristics of the airplane with propeller windmilling will be satisfactory for all loading conditions if recovery is attempted by full rudder reversal accompanied by simultaneous movement of the stick laterally to full with the spin (stick right in a right spin) and longitudinally to neutral. Inverted spins should be satisfactorily terminated by fully reversing the rudder followed immediately by moving the stick laterally towards the forward rudder pedal and longitudinally to neutral. Removal of the gun pods or fixing the rudders at neutral will not adversely affect the airplane's spin-recovery characteristics, but removal of the lower vertical tail will result in unsatisfactory spin-recovery characteristics. The model-test results showed that a 13.3-foot wing-tip conventional parachute (drag coefficient approximately 0.7) should be effective as an emergency spin-recovery device during demonstration spins of the airplane. It was indicated that the airplane should not tumble and that no unusual longitudinal-trim characteristics should be obtained for the center-of-gravity positions investigated.

Deodorant effects of a sage extract stick: Antibacterial activity and sensory evaluation of axillary deodorancy

PubMed Central

Shahtalebi, Mohammad Ali; Ghanadian, Mustafa; Farzan, Ali; Shiri, Niloufar; Shokri, Dariush; Fatemi, Syed Ali

2013-01-01

Background: Deodorant products prevent the growth and activity of the degrading apocrine gland bacteria living in the armpit. Common antibacterial agents in the market like triclosan and aluminum salts, in spite of their suitable antibacterial effects, increase the risk of Alzheimer's disease, breast and prostate cancers or induce contact dermatitis. Therefore, plant extracts possessing antibacterial effects are of interest. The aim of the present study was to verify the in vitro antimicrobial effects of different sage extracts against two major bacteria responsible for axillary odor, and to evaluate the deodorant effect of a silicon-based stick containing sage extracts in different densities in humans. Materials and Methods: Different fractions of methanolic extract of Salvia officinalis (sage) were evaluated on a culture of armpit skin surface of volunteers through agar microdilution antimicrobial assay. Then, randomized, double-blind placebo-controlled clinical trial with the best antibacterial fraction was conducted on 45 female healthy volunteers. Participants were treated with a single dose in four groups, each containing 15 individuals: Group 1 (200 μg/mL), 2 (400 μg/mL), 3 (600 μg/mL) of dichloromethane sage extract, and placebo (without extract). A standard sensory evaluation method for the evaluation of deodorant efficacy was used before, and two hours, four hours, and eight hours after single application of a deodorant or placebo (ASTM method E 1207-87 Standard Practice for the Sensory Evaluation of Axillary Deodorancy). Results: The data were analyzed with two factors relating to densities and time. In 45 participants with a mean [± standard deviation (SD)] age of 61.5±11.8 years, statistically significant within-group differences were observed before and two, four, and eight hours after deodorant treatment for groups 1, 2, and 3. Groups 1, 2, and 3 had a significantly smaller odor score than placebo after two, four, and eight hours (P < 0.001). In a comparison of different deodorant densities, the interaction effect was not significant between deodorant 200 and 400 μg/mL, but was significant between 200 and 600 and between 400 and 600 μg/mL sage extract sticks (P < 0.001). Before running the sensory evaluation of the deodorant sticks on the subjects, a rabbit skin patch test was used to demonstrate that the formulation had no irritants. Conclusion: A single treatment with a stick deodorant containing dichloromethane sage extract of 200, 400, or 600 μg/mL concentrations was effective in reducing the axillary malodor level compared with the control, in healthy subjects. PMID:24497852

Deodorant effects of a sage extract stick: Antibacterial activity and sensory evaluation of axillary deodorancy.

PubMed

Shahtalebi, Mohammad Ali; Ghanadian, Mustafa; Farzan, Ali; Shiri, Niloufar; Shokri, Dariush; Fatemi, Syed Ali

2013-10-01

Deodorant products prevent the growth and activity of the degrading apocrine gland bacteria living in the armpit. Common antibacterial agents in the market like triclosan and aluminum salts, in spite of their suitable antibacterial effects, increase the risk of Alzheimer's disease, breast and prostate cancers or induce contact dermatitis. Therefore, plant extracts possessing antibacterial effects are of interest. The aim of the present study was to verify the in vitro antimicrobial effects of different sage extracts against two major bacteria responsible for axillary odor, and to evaluate the deodorant effect of a silicon-based stick containing sage extracts in different densities in humans. Different fractions of methanolic extract of Salvia officinalis (sage) were evaluated on a culture of armpit skin surface of volunteers through agar microdilution antimicrobial assay. Then, randomized, double-blind placebo-controlled clinical trial with the best antibacterial fraction was conducted on 45 female healthy volunteers. Participants were treated with a single dose in four groups, each containing 15 individuals: Group 1 (200 μg/mL), 2 (400 μg/mL), 3 (600 μg/mL) of dichloromethane sage extract, and placebo (without extract). A standard sensory evaluation method for the evaluation of deodorant efficacy was used before, and two hours, four hours, and eight hours after single application of a deodorant or placebo (ASTM method E 1207-87 Standard Practice for the Sensory Evaluation of Axillary Deodorancy). The data were analyzed with two factors relating to densities and time. In 45 participants with a mean [± standard deviation (SD)] age of 61.5±11.8 years, statistically significant within-group differences were observed before and two, four, and eight hours after deodorant treatment for groups 1, 2, and 3. Groups 1, 2, and 3 had a significantly smaller odor score than placebo after two, four, and eight hours (P < 0.001). In a comparison of different deodorant densities, the interaction effect was not significant between deodorant 200 and 400 μg/mL, but was significant between 200 and 600 and between 400 and 600 μg/mL sage extract sticks (P < 0.001). Before running the sensory evaluation of the deodorant sticks on the subjects, a rabbit skin patch test was used to demonstrate that the formulation had no irritants. A single treatment with a stick deodorant containing dichloromethane sage extract of 200, 400, or 600 μg/mL concentrations was effective in reducing the axillary malodor level compared with the control, in healthy subjects.

11. VIEW OF STARBOARD ELEVATION OF STERN (WITHOUT SCALE STICK), ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. VIEW OF STARBOARD ELEVATION OF STERN (WITHOUT SCALE STICK), SHOWING WHEELHOUSE, DUCKTAIL, AND RUDDER ASSEMBLY; CRANE AT LEFT POSITIONED FOR REMOVAL OF WHEELHOUSE; UNFINISHED FERRO-CONCRETE HULL OF UNKNOWN VESSEL IN BACKGROUND - Bugeye "Louise Travers", Intersection of Routes 2 & 4, Solomons, Calvert County, MD

The molecular dynamics of adsorption and dissociation of O{sub 2} on Pt(553)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobse, Leon, E-mail: l.jacobse@chem.leidenuniv.nl; Dunnen, Angela den; Juurlink, Ludo B. F.

2015-07-07

Molecular adsorption and dissociation of O{sub 2} on the stepped Pt(553) surface have been investigated using supersonic molecular beam techniques and temperature programmed desorption. The initial and coverage-dependent sticking probability was determined with the King and Wells technique for various combinations of incident kinetic energy, surface temperature, incident angle, and surface coverage. A comparison with similar data for Pt(533) and Pt(110)(1 × 2) shows quantitatively the same high step-induced sticking at low incident energies compared to Pt(111). The enhancement is therefore insensitive to the exact arrangement of atoms forming surface corrugation. We consider energy transfer and electronic effects to explainmore » the enhanced sticking. On the other hand, dissociation dynamics at higher incident kinetic energies are strongly dependent on step type. The Pt(553) and Pt(533) surfaces are more reactive than Pt(111), but the (100) step shows higher sticking than the (110) step. We relate this difference to a variation in the effective lowering of the barrier to dissociation from molecularly adsorbed states into atomic states. Our findings are in line with results from experimental desorption studies and theoretical studies of atomic binding energies. We discuss the influence of the different step types on sticking and dissociation dynamics with a one-dimensional potential energy surface.« less

Kangaroo care and behavioral and physiologic pain responses in very-low-birth-weight twins: a case study.

PubMed

Cong, Xiaomei; Cusson, Regina M; Hussain, Naveed; Zhang, Di; Kelly, Sharon P

2012-09-01

The purpose of this case study was to describe pain responses in three study conditions: longer (30 minutes) kangaroo care (KC) before and throughout heel stick (KC30), shorter (15 minutes) KC before and throughout heel stick (KC15), and incubator care throughout heel stick (IC) in 28-week gestational age twins. Pain responses were measured by crying time, Preterm Infant Pain Profile (PIPP), and heart rate variability indexes, including low-frequency power (LF, representing sympathetic activity), high-frequency power (HF, parasympathetic activity), and LF/HF ratio (sympathetic-parasympathetic balance). Both twins cried more and had higher PIPP pain scores and tachycardia during heel stick in the IC condition. Infant B had an incident of apnea and tachycardia by the end of the heel stick and a bradycardia episode during recovery in the IC condition. The twins had lower LF/HF ratios (better autonomic nervous system balance) during recovery in both longer and shorter KC conditions compared with the IC condition. Infant B had difficulty returning to LF/HF ratio baseline level after the painful procedure in the IC condition. These data suggest that both longer and shorter KC before and throughout painful procedures can be helpful in reducing behavioral and physiologic pain responses in preterm infants. Copyright © 2012 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

MoS2-Filled PEEK Composite as a Self-Lubricating Material for Aerospace Applications

NASA Technical Reports Server (NTRS)

Theiler, Geraldine; Gradt, Thomas

2010-01-01

At BAM, several projects were conducted in the past years dealing with the tribological properties of friction couples at cryogenic temperature and in vacuum environment. Promising candidates for vacuum application are MoS2-filled PEEK/PTFE composites, which showed a friction coefficient as low as 0.03 in high vacuum. To complete the tribological profile of these composites, further tests were performed in ultra-high vacuum (UHV) at room temperature. In this paper, friction and stick slip behavior, as well as outgassing characteristics during the test are presented.

Determination of the Stability and Control Characteristics of a Tailless All-Wing Airplane Model with Sweepback in the Langley Free-Flight Tunnel

NASA Technical Reports Server (NTRS)

Seacord, Charles L.; Campbell, John P.

1945-01-01

Force and flight tests were performance on an all-wing model with windmilling propellers. Tests were conducted with deflected and retracted flaps, with and without auxiliary vertical tail surfaces, and with different centers of gravity and trim coefficients. Results indicate serious reduction of stick-fixed longitudinal stability because of wing-tip stalling at high lift coefficient. Directional stability without vertical tail is undesirably low. Low effective dihedral should be maintained. Elevator and rudder control system is satisfactory.

Detection of hypoglycemia with continuous interstitial and traditional blood glucose monitoring using the FreeStyle Navigator Continuous Glucose Monitoring System.

PubMed

McGarraugh, Geoffrey; Bergenstal, Richard

2009-03-01

The objective of the analysis was to compare detection of hypoglycemic episodes (glucose <70 mg/dL lasting >15 min) with the FreeStyle Navigator Continuous Glucose Monitoring System (FSN-CGM) (Abbott Diabetes Care, Alameda, CA) alarms to detection with traditional finger stick testing at an average frequency of eight tests per day. The performance of FSN-CGM alarms was evaluated in a clinic setting using 58 subjects with type 1 diabetes mellitus (T1DM) monitoring interstitial glucose concentration over a 5-day period compared to reference YSI measurements (instrument manufactured by YSI, Yellow Springs, OH) at 15-min intervals. Finger stick glucose testing was evaluated in the home environment with 91 subjects with TIDM monitoring with the blood glucose meter integrated into the FreeStyle Navigator (FSN-BG) over a 20-day period. The reference was FSN-CGM with results masked from the subjects. Blood glucose values <=85 mg/dL were considered the optimal treatment level to avoid or reverse hypoglycemia. With a threshold alarm setting of 85 mg/dL, 90.6% of hypoglycemic episodes were detected within +/- 30 min by FSN-CGM in the clinic study. When the alarm was activated, YSI glucose was <= 85 mg/dL 77.2% of the time. In the home environment, the average FSN-BG testing frequency was 7.9 tests per day. Hypoglycemia was verified within +/- 30 min by FSN-BG measurements <= 85 mg/dL at a rate of 27.5%. Even with a high rate of FSN-BG testing, hypoglycemia detected by FSN-CGM was verified by patients with T1DM very infrequently. A high rate of hypoglycemia detection with a moderate rate of unnecessary alarms can be attained using FSN-CGM.

A Study of The Effect of Preschool Children's Participation in Sensorimotor Activities on Their Understanding of the Mechanical Equilibrium of a Balance Beam

NASA Astrophysics Data System (ADS)

Hadzigeorgiou, Yannis; Anastasiou, Leonidas; Konsolas, Manos; Prevezanou, Barbara

2009-01-01

The purpose of this study was to investigate whether participation in sensorimotor activities by preschool children involving their own bodily balance while walking on a beam over the floor has an effect on their understanding of the mechanical equilibrium of a balance beam. The balance beam consisted of a horizontal stick balancing around its center of mass (middle point), while carrying equal-weight objects on either side of it. The study utilized a two-group design, and was conducted in three phases (pre-test, treatment and post-test). The results of the study provide evidence that there was such an effect, since the children (who participated in the sensorimotor activities) could select out of a number of objects those two with the same weight regardless of their shape, size or colour, in order to balance the stick. This effect also can be seen when a comparison is made with a second group of children, which had previously participated in a hands-on activity regarding the equilibrium of a similar balance beam, and which (children), therefore, had a definite advantage over the other children who had participated in the sensorimotor activity. A Chi Square Test showed no significant differences between the two groups on both an immediate and a delayed post-test, while the McNemar Test for the Significance of Change showed a statistically significant difference (that is, a negative change in performance between the first and the second post-test) only within the hands-on group. This difference represents evidence that the children from the sensorimotor group remembered better the rule they were applying (i.e., selecting equal-weight objects) in order to balance the beam.

50 CFR 660.712 - Longline fishery.

Code of Federal Regulations, 2012 CFR

2012-10-01

...° long. (7) No light stick may be possessed on board a vessel registered for use of longline gear during... light stick as used in this paragraph is any type of light emitting device, including any flourescent glow bead, chemical, or electrically powered light that is affixed underwater to the longline gear. (8...

50 CFR 660.712 - Longline fishery.

Code of Federal Regulations, 2011 CFR

2011-10-01

...° long. (7) No light stick may be possessed on board a vessel registered for use of longline gear during... light stick as used in this paragraph is any type of light emitting device, including any flourescent glow bead, chemical, or electrically powered light that is affixed underwater to the longline gear. (8...

50 CFR 660.712 - Longline fishery.

Code of Federal Regulations, 2014 CFR

2014-10-01

...° long. (7) No light stick may be possessed on board a vessel registered for use of longline gear during... light stick as used in this paragraph is any type of light emitting device, including any flourescent glow bead, chemical, or electrically powered light that is affixed underwater to the longline gear. (8...

50 CFR 660.712 - Longline fishery.

Code of Federal Regulations, 2013 CFR

2013-10-01

...° long. (7) No light stick may be possessed on board a vessel registered for use of longline gear during... light stick as used in this paragraph is any type of light emitting device, including any flourescent glow bead, chemical, or electrically powered light that is affixed underwater to the longline gear. (8...

Talking Stick. Volume 28, Number 6, July-August 2011

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2011-01-01

The "Talking Stick" is published bimonthly, six times a year in January/ February, March/April, May/ June, July/August, September/October, and November/ December by the Association of College and University Housing Officers-International. Each issue is divided into three sections, namely: Features, Columns, and Departments. These sections contain…

Talking Stick. Volume 27, Number 3, January-February 2010

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2010-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain articles…

Talking Stick. Volume 29, Number 6, July-August 2012

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2012-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain…

Talking Stick. Volume 29, Number 2, November-December 2011

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2011-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain articles…

Talking Stick. Volume 29, Number 4, March-April 2012

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2012-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain articles…

Talking Stick. Volume 26, Number 6, July-August 2009

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2009-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain articles…

Talking Stick. Volume 27, Number 5, May-June 2010

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2010-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain articles…

Plotting the Analemma from Shadow Stick Observations.

ERIC Educational Resources Information Center

Glenn, William H.

1982-01-01

Secondary students can study time and the motions of the sun by plotting an analemma, a graphic representation of the declination of the sun and the equation of time for every day of the year. They can collect data by measuring a dowel stick's shadow in the noon sun. (KC)

Talking Stick. Volume 28, Number 5, May-June 2011

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2011-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections, namely: Features, Columns, and Departments. These sections contain…

Talking Stick. Volume 28, Number 4, March-April 2011

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2011-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections, namely: Features, Columns, and Departments. These sections contain…

THE RATES OF POLYCYCLIC AROMATIC HYDROCARBON EMISSIONS FROM INCENSE BURNING

EPA Science Inventory

The paper presents the results of experiments performed to determine the amounts of gas- and particle-phase polycyclic aromatic hydrocarbons (PAHS) in incense smoke. Ten brands of incense, 3 of stick, 2 of joss stick, and one each of cone, smudge bundle, rope, powder, and rock, w...

Talking Stick. Volume 27, Number 4, March-April 2010

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2010-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain…

The Philippine "Hip Hop Stick Dance"

ERIC Educational Resources Information Center

Lewis, Lisa

2012-01-01

This article introduces a dance that blends the traditional cultural heritage of the Philippines with modern music and moves. "Hip Hop Stick Dance" incorporates Tinikling (the Philippine national dance) and Arnis (a Filipino style of martial arts) to create a contemporary combination of rhythm, dance, and fitness. It was designed to introduce…

Talking Stick. Volume 29, Number 3, January-February 2012

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2012-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain articles…

The Mathematics of Sundials

ERIC Educational Resources Information Center

Vincent, Jill

2008-01-01

As early as 3500 years ago, shadows of sticks were used as a primitive instrument for indicating the passage of time through the day. The stick came to be called a "gnomon" or "one who knows." Early Babylonian obelisks were designed to determine noon. The development of trigonometry by Greek mathematicians meant that hour lines…

Talking Stick. Volume 28, Number 2, November-December 2010

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2010-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections, namely: Features, Columns, and Departments. These sections…

Talking Stick. Volume 27, Number 6, July-August 2010

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2010-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain articles…

Talking Stick. Volume 27, Number 1, September-October 2009

ERIC Educational Resources Information Center

Baumann, James A., Ed.

2009-01-01

The "Talking Stick" is published bimonthly, six times a year in January/February, March/April, May/June, July/August, September/October, and November/December by the Association of College and University Housing Officers-International. Each issue is divided into three sections: Features, Columns, and Departments. These sections contain…

Collaborative Research Program on Seafood Toxins

DTIC Science & Technology

1988-08-14

Crystallographic Structures of Saxitoxins Cl and C2 Appendix C: Collaborative Research Program an Seafcod Toxins Progress Report on Ciguatera and Related...radioimmunoassay for PSP were also evalumted. The Hokama stick test for ciguatera toxin was also evaluated. 4. initiate Studies on the Accumulation...tco•d which caie a form of b-mnn poisoning referred to as ciguatera . The respcnsible toxins originate from ll1ular rine algae of the division

Stick-Slip of Lightly Loaded Rock. Part 1. Dilatancy and Shearing Behavior of Assemblages of Rods. Part 2

DTIC Science & Technology

1975-02-04

perceiving some thing which resem.- bles nothing within the limits of one’s kowledge , a name is a matter of great difficulty. I have called this unique...of the test bed by a screw and jack arrangement powered by a 1/6 h.p. motor, the axial force being monitored with a Dillon load cell (Fig. 2). Axial

Tribological dry sliding behavior of chopped carbon fiber reinforced polyetheretherketone

NASA Astrophysics Data System (ADS)

Chumaevskii, A. V.; Ivanov, A. N.; Filippov, A. V.; Rubtsov, V. E.; Kolubaev, E. A.

2017-12-01

Tribological tests on 3D printed pure polyetheretherketone and carbon fiber reinforced polyetheretherketone samples were carried out. The negative effect of carbon fiber sticking out of the matrix on wear and sliding process stability was revealed. These fibers may be too long and oriented to the worn surface in a manner that prevents their removal by wear so that the worn surface becomes irregular and the sliding process instable.

Chemosensory Dysfunction in Alcohol-Related Disorders: A Joint Exploration of Olfaction and Taste.

PubMed

Brion, Mélanie; de Timary, Philippe; Vander Stappen, Caroline; Guettat, Lamia; Lecomte, Benoît; Rombaux, Philippe; Maurage, Pierre

2015-11-01

Chemosensory (olfaction-taste) dysfunctions are considered as reliable biomarkers in many neurological and psychiatric states. However, experimental measures of chemosensory abilities are lacking in alcohol-dependence (AD) and Korsakoff Syndrome (KS, a neurological complication of AD), despite the role played by alcohol-related odors and taste in the emergence and maintenance of AD. This study thus investigated chemosensory impairments in AD and KS. Olfactory-gustatory measures were taken among 20 KS, 20 AD, and 20 control participants. Olfaction (odor detection-discrimination-identification) was assessed using the "Sniffin Sticks" battery and taste was measured using the "Taste Strips" task. Impairments were found for high-level olfaction in AD (odor discrimination) and KS (odor discrimination-identification), even after controlling for psychopathological comorbidities. Gustatory deficits were also observed in both groups, indexing a global deficit for chemosensory perception. Finally, the gradient of impairment between the successive disease stages for odor identification suggests that the hypothesis of a continuum between AD and KS regarding cognitive deficits can be generalized to chemosensory perception. AD and KS are thus characterized by deficits in chemosensory abilities, which could constitute a marker of the AD-KS transition. In view of its deleterious influence on everyday life, chemosensory dysfunction should also be taken into account in clinical settings. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Van der Waal Interactions in Ultrafine Nanocellulose Aerogels

NASA Astrophysics Data System (ADS)

Fritch, Byron; Bradley, Derek; Kidd, Tim

Nanocellulose aerogels have shown an ability to be used in many different applications ranging from oil sponges to conductive materials to possibly a low calorie food substitute. Not much is known about the structural and physical property changes that occur when the composition of the aerogel changes. We studied what properties change when the aerogel amounts change, as well as how sticky the aerogels are and how strong they are. The higher concentrations appeared to have more plate-like structures while the lower concentrations had a more fibrous material. These fibers in the low concentrations had a smaller diameter than a human hair. Only the low concentration aerogels were able to stick to a glass surface in the adhesion test, but were able to support a mass much larger than their own. These low concentrations also would stick to your finger when lightly touched. Preliminary tests show that a concentration that is not too low, but not too high, is best for tensile strength. All concentrations were able to hold many times their own mass. Cellulose should be studied more because it is a renewable material and is easily accessed. Nanocellulose is also not environmentally dangerous allowing it to be used in applications involving humans and the environment like noted above. National Science Foundation Grant DMR-1410496.

Characterization of Friction Joints Subjected to High Levels of Random Vibration

NASA Technical Reports Server (NTRS)

deSantos, Omar; MacNeal, Paul

2012-01-01

This paper describes the test program in detail including test sample description, test procedures, and vibration test results of multiple test samples. The material pairs used in the experiment were Aluminum-Aluminum, Aluminum- Dicronite coated Aluminum, and Aluminum-Plasmadize coated Aluminum. Levels of vibration for each set of twelve samples of each material pairing were gradually increased until all samples experienced substantial displacement. Data was collected on 1) acceleration in all three axes, 2) relative static displacement between vibration runs utilizing photogrammetry techniques, and 3) surface galling and contaminant generation. This data was used to estimate the values of static friction during random vibratory motion when "stick-slip" occurs and compare these to static friction coefficients measured before and after vibration testing.

Coagulation of particles in Saturn's rings - Measurements of the cohesive force of water frost

NASA Technical Reports Server (NTRS)

Hatzes, A. P.; Bridges, F.; Lin, D. N. C.; Sachtjen, S.

1991-01-01

Experimental data are presented on the sticking force of water ice particles which are indicative of the role that the cohesive properties of such particles could play in the dynamics of Saturn ring particles. Sticking forces are dependent on particle impact velocities; a 'Velcro' model is devised to describe the surface structure involved in sticking. The data indicate that below the critical impact velocity of about 0.03 cm/sec, particle cohesion always occurs. Due to the optical depth of micron-sized grains in the Saturn rings, particles are hypothesized to be coated with a layer of frost which will render cohesion an important ring-dynamics process.

Hinge Moment Coefficient Prediction Tool and Control Force Analysis of Extra-300 Aerobatic Aircraft

NASA Astrophysics Data System (ADS)

Nurohman, Chandra; Arifianto, Ony; Barecasco, Agra

2018-04-01

This paper presents the development of tool that is applicable to predict hinge moment coefficients of subsonic aircraft based on Roskam’s method, including the validation and its application to predict hinge moment coefficient of an Extra-300. The hinge moment coefficients are used to predict the stick forces of the aircraft during several aerobatic maneuver i.e. inside loop, half cuban 8, split-s, and aileron roll. The maximum longitudinal stick force is 566.97 N occurs in inside loop while the maximum lateral stick force is 340.82 N occurs in aileron roll. Furthermore, validation hinge moment prediction method is performed using Cessna 172 data.

Hot-water spraying is a sensitive test for signs of life before dressing and scalding in pig abattoirs with carbon dioxide (CO2) stunning.

PubMed

Parotat, S; von Holleben, K; Arnold, S; Troeger, K; Luecker, E

2016-02-01

This study investigated the benefits of hot-water spraying (HWS) as a diagnostic test to verify the absence of signs of life (SOL) before scalding in pigs slaughtered with carbon dioxide (CO2) stunning. A total of 37 108 finishing pigs from five German abattoirs (A to E) operating at 55 to 571 pigs per hour were assessed. Suspended pigs were sprayed onto the muzzle, head and front legs (143 to 258 s post sticking for 4 to 10 s, 57°C to 72°C). Any active movements during HWS were rated as positive test outcomes. In comparison, SOL were considered to be absent if a subsequent manual examination was negative and no active movements were observed following HWS. The incidence of pigs with activity during hot-water spraying (PWA) was restricted to two abattoirs (B: 0.25%; D: 0.02%; A, C, E: 0.00%). PWA showed movements of facial muscles (88%), mouth opening (78%), righting reflex (63%), isolated leg movements (35%) and vocalization (4%). The manual examination was positive in 71% of PWA (corneal/dazzle reflex: 67%/53%, nasal septum pinch: 33%), whereas all inactive pigs tested negative (P99.9% in either case. Any positive manual findings as well as any respiratory activity were instantly terminated using a penetrating captive bolt. Active movements triggered by the shot were shown to be an indicator for SOL (P<0.001). Video analyses revealed that spontaneous movements (SM) following sticking were present in 100% of PWA as opposed to 3.1% in pigs without such activity (controls). Results for different categories of SM in PWA v. controls were as follows: 100% v. 2.6% for mouth opening, 16.0% v. 0.1% for righting reflex and 22.0% v. 0.9% for isolated leg movements (all P<0.001). First mouth opening after sticking was observed later in PWA (28±24 v. 10±7 s), but mouth openings were observed for a longer period of time (141±44 v. 27±25 s) (both P<0.001). PWA with shorter mouth-opening intervals showed higher movement intensities during HWS and more positive manual findings (P<0.05). We conclude that HWS is a promising test for SOL. SM and sustained mouth opening in particular are indicators for compromised animal welfare and affected pigs should be shot by captive bolt.

Friction behavior for clay minerals during dehydration process: implication for unstable friction at shallow portion along subducting plate

NASA Astrophysics Data System (ADS)

Kubo, T.; Katayama, I.

2016-12-01

Along plate boundary subduction thrusts, the transformation of smectite to illite within fault gouge at temperatures around 100 - 200 °C is one of the key mineralogical changes thought to control the updip limit of seismicity (Hyndman et al., 1997). Since hydration state of clay minerals is possible to vary from moment to moment in nature, it is important to investigate the effect of dehydration and hydrate state on frictional properties with progression of a removal of water is rare. In this study, we focus on the effect of dehydration of water on the frictional properties of clay minerals by temperature-rising test. For the friction experiments, starting materials we used are Ca-montmorillonite, which were placed on the simulated fault surface and two side blocks were placed together to produce a double-direct shear configuration. The sample assembly was heated by an external furnace up to 400 °C that is monitored by thermocouples located in the central part of sample assembly. After steady-state friction at room temperature we started to elevate the temperature around the specimen at a constant heating rate of 1, 3, and 10 °C/min. Ca-montmorillonite gouge showed unique friction behavior development as elevated temperature, which is divided into three stages; (1) friction coefficient decreased at relative low temperature, (2) friction coefficient increased at middle temperature, and (3) stick-slip behavior occurred at high temperature. Stick-slip behavior as elevated temperature implies to have a potential of velocity weakening behavior. Observed stick-slip behavior occurs at a temperature of 320 °C, which is extremely higher from a temperature range of occurring dehydration for Ca-montmorillonite (100 - 200 °C). However, at low heating rate the temperature that stick-slip behavior occurs shifted to lower temperature. Our preliminary results suggest that the observed systematical shift suggest that these frictional behavior is likely to be controlled by dehydration reaction kinetics. Dehydration of clay minerals change friction behavior, and play a key role for the occurrence of earthquakes along subducting plate.

Tuner design and RF test of a four-rod RFQ

NASA Astrophysics Data System (ADS)

Zhou, QuanFeng; Zhu, Kun; Guo, ZhiYu; Kang, MingLei; Gao, ShuLi; Lu, YuanRong; Chen, JiaEr

2011-12-01

A mini-vane four-rod radio frequency quadruple (RFQ) accelerator has been built for neutron imaging. The RFQ will operate at 201.5 MHz, and its length is 2.7 m. The original electric field distribution along the electrodes is not flat. The resonant frequency needs to be tuned to the operating value. And the frequency needs to be compensated for temperature change during high power RF test and beam test. As tuning such a RFQ is difficult, plate tuners and stick tuners are designed. This paper will present the tuners design, the tuning procedure, and the RF properties of the RFQ.

Flight Evaluation of an Aircraft with Side and Center Stick Controllers and Rate-Limited Ailerons

NASA Technical Reports Server (NTRS)

Deppe, P. R.; Chalk, C. R.; Shafer, M. F.

1996-01-01

As part of an ongoing government and industry effort to study the flying qualities of aircraft with rate-limited control surface actuators, two studies were previously flown to examine an algorithm developed to reduce the tendency for pilot-induced oscillation when rate limiting occurs. This algorithm, when working properly, greatly improved the performance of the aircraft in the first study. In the second study, however, the algorithm did not initially offer as much improvement. The differences between the two studies caused concern. The study detailed in this paper was performed to determine whether the performance of the algorithm was affected by the characteristics of the cockpit controllers. Time delay and flight control system noise were also briefly evaluated. An in-flight simulator, the Calspan Learjet 25, was programmed with a low roll actuator rate limit, and the algorithm was programmed into the flight control system. Side- and center-stick controllers, force and position command signals, a rate-limited feel system, a low-frequency feel system, and a feel system damper were evaluated. The flight program consisted of four flights and 38 evaluations of test configurations. Performance of the algorithm was determined to be unaffected by using side- or center-stick controllers or force or position command signals. The rate-limited feel system performed as well as the rate-limiting algorithm but was disliked by the pilots. The low-frequency feel system and the feel system damper were ineffective. Time delay and noise were determined to degrade the performance of the algorithm.

Comparison of Radiofrequency and Electrocautery With Conventional Scalpel Incisions.

PubMed

Hasar, Zafer Burak; Ozmeric, Nurdan; Ozdemir, Burcu; Gökmenoğlu, Ceren; Baris, Emre; Altan, Gökçen; Kahraman, Sevil

2016-11-01

The disadvantages of conventional scalpels, including insufficient control of bleeding, prompted us to search for new alternative methods such as electrosurgery and radiosurgery. In this study, the conventional scalpel was compared with radiosurgery and electrosurgery for wound healing with assessment of lateral heat production, inflammation, and instrument performance. Incisions were made in the palatal mucosa of 42 Wistar rats using a scalpel, electrocautery instrument, or radiofrequency instrument. Postoperative hemostasis, tissue coagulation, and tissue sticking were measured, and pain evaluation through weight loss was recorded. Gingival biopsy specimens from the surgical area were obtained at the time of surgery and 2, 4, 7, and 14 days postoperatively and were evaluated immunohistochemically for inducible nitric oxide synthase and heat shock protein 70. Kruskal-Wallis, 1-way analysis of variance, and Mann-Whitney U tests were used for statistical evaluation. The rats in the electrosurgery and radiosurgery groups had aggressively greater weight loss when compared with the scalpel group in the first 7 days. Hemostasis was better in the electrocautery group, tissue coagulation was greater in the radiofrequency group (P < .001), and tissue sticking was lesser in the scalpel group (P < .001) compared with the other groups. Inducible nitric oxide synthase expression and heat shock protein 70 expression were similar in all 3 groups. Electrosurgery performed better regarding hemostasis, whereas a scalpel was superior in terms of tissue sticking and tissue coagulation. Radiosurgery was superior regarding hemostasis when compared with a conventional scalpel, but it was not as successful as electrosurgery. Copyright © 2016. Published by Elsevier Inc.

Bone morphogenetic protein 2 and decorin expression in old fracture fragments and surrounding tissues.

PubMed

Han, X G; Wang, D K; Gao, F; Liu, R H; Bi, Z G

2015-09-21

Bone morphogenetic protein 2 (BMP-2) can promote fracture healing. Although the complex role BMP-2 in bone formation is increasingly understood, the role of endogenous BMP-2 in nonunion remains unclear. Decorin (DCN) can promote the formation of bone matrix and calcium deposition to control bone morphogenesis. In this study, tissue composition and expression of BMP-2 and DCN were detected in different parts of old fracture zones to explore inherent anti-fibrotic ability and osteogenesis. Twenty-three patients were selected, including eight cases of delayed union and 15 cases of nonunion. Average duration of delayed union or nonunion was 15 months. Fracture fragments and surrounding tissues, including bone grafts, marrow cavity contents, and sticking scars, were categorically sampled during surgery. Through observation and histological testing, component comparisons were made between fracture fragments and surrounding tissue. The expression levels of DCN and BMP-2 in different tissues were detected by immunohistochemical staining and real-time polymerase chain reaction. The expression of DCN and BMP- 2 in different parts of the nonunion area showed that, compared with bone graft and marrow cavity contents, sticking scars had the highest expression of BMP-2. Compared with the marrow cavity contents and sticking scars, bone grafts had the highest expression of DCN. The low antifibrotic and osteogenic activity of the nonunion area was associated with non-co-expression of BMP-2 and DCN. Therefore, the co-injection of osteogenic factor BMP and DCN into the nonunion area can improve the induction of bone formation and enhance the conversion of the old scar, thereby achieving better nonunion treatment.

What causes the facing-the-viewer bias in biological motion?

PubMed

Weech, Séamas; McAdam, Matthew; Kenny, Sophie; Troje, Nikolaus F

2014-10-13

Orthographically projected biological motion point-light displays are generally ambiguous with respect to their orientation in depth, yet observers consistently prefer the facing-the-viewer interpretation. There has been discussion as to whether this bias can be attributed to the social relevance of biological motion stimuli or relates to local, low-level stimulus properties. In the present study we address this question. In Experiment 1, we compared the facing-the-viewer bias produced by a series of four stick figures and three human silhouettes that differed in posture, gender, and the presence versus absence of walking motion. Using a paradigm in which we asked observers to indicate the spinning direction of these figures, we found no bias when participants observed silhouettes, whereas a pronounced degree of bias was elicited by most stick figures. We hypothesized that the ambiguous surface normals on the lines and dots that comprise stick figures are prone to a visual bias that assumes surfaces to be convex. The local surface orientations of the occluding contours of silhouettes are unambiguous, and as such the convexity bias does not apply. In Experiment 2, we tested the role of local features in ambiguous surface perception by adding dots to the elbows and knees of silhouettes. We found biases consistent with the facing directions implied by a convex body surface. The results unify a number of findings regarding the facing-the-viewer bias. We conclude that the facing-the-viewer bias is established at the level of surface reconstruction from local image features rather than on a semantic level. © 2014 ARVO.

Flexural properties of fiber reinforced root canal posts.

PubMed

Lassila, Lippo V J; Tanner, Johanna; Le Bell, Anna-Maria; Narva, Katja; Vallittu, Pekka K

2004-01-01

Fiber-reinforced composite (FRC) root canal posts have been introduced to be used instead of metal alloys and ceramics. The aim of this study was to investigate the flexural properties of different types of FRC posts and compare those values with a novel FRC material for dental applications. Seventeen different FRC posts of various brands (Snowpost, Carbopost, Parapost, C-post, Glassix, Carbonite) and diameters, (1.0-2.1 mm) and a continuous unidirectional E-glass FRC polymerized by light activation to a cylindrical form (everStick, diameter 1.5 mm) as a control material were tested. The posts (n=5) were stored at room's humidity or thermocycled (12.000 x, 5 degrees C/55 degrees C) and stored in water for 2 weeks before testing. A three-point bending test (span=10 mm) was used to measure the flexural strength and modulus of FRC post specimens. Analysis of ANOVA revealed that thermocycling, brand of material and diameter of specimen had a significant effect (p<0.001) on the fracture load and flexural strength. The highest flexural strength was obtained with the control material (everStick, 1144.9+/-99.9 MPa). There was a linear relationship between fracture load and diameter of posts for both glass fiber and carbon fiber posts. Thermocycling decreased the flexural modulus of the tested specimens by approximately 10%. Strength and fracture load decreased approximately 18% as a result of thermocycling. Considerable variation can be found in the calculated strength values of the studied post brands. Commercial prefabricated FRC posts showed lower flexural properties than an individually polymerised FRC material.

Offensive Words, Lethal Weapons

ERIC Educational Resources Information Center

Jacoby, Russell

2007-01-01

The old childhood ditty "sticks and stones may break my bones, but words will never hurt me" has proved wiser than the avalanche of commentary provoked by the recent insults by Don Imus and the killings at Virginia Tech. Our society forbids public name-calling but allows sticks and stones. Anyone can acquire a gun, but everyone must be…

Effect of hinge-moment parameters on elevator stick forces in rapid maneuvers

NASA Technical Reports Server (NTRS)

Jones, Robert T; Greenberg, Harry

1944-01-01

The importance of the stick force per unit normal acceleration as a criterion of longitudinal stability and the critical dependence of this gradient on elevator hinge-moment parameters have been shown in previous reports. The present report continues the investigation with special reference to transient effects for maneuvers of short duration.

"Fist, Stick, Knife, Gun": Getting Real in Upward Bound.

ERIC Educational Resources Information Center

Pace, Barbara G.; Adkins, Theresa A.

2002-01-01

Describes how a teacher found literature for Upward Bound students. Presents Geoffrey Canada's "Fist, Stick, Knife, Gun: A Personal History of Violence in America" as a nonfiction work to provide clarity and connections that might not have been available in a fictional work, yet it had elements of literary fiction that made the text…

The Donkey and the Stick: Revisited.

ERIC Educational Resources Information Center

Smith, Clifford E.

The fable of the "Donkey and the Stick" is used as an analogy to present day industrial relations problems. The managerial approach of autocratic leadership has long since outlived its usefulness; rewards based along Maslow's hierarchy of needs should be used for employee motivation. The point is made from the fable that employees can't be…

Development by extrusion of soyabari snack sticks: a nutritionally improved soya-maize product based on the Nigerian snack (kokoro).

PubMed

Omueti, O; Morton, I D

1996-01-01

A nutritionally improved local snack compared to existing kokoro has been developed by extrusion cooking of different formulations of maize, soybean and condiments such as pepper, onion, salt, palm oil, plantain and banana. The improved snack was named as the 'soyabari snack stick'. The chemical composition of representative extruded products indicates a high level of crude protein, fat, energy, available lysine and improved in vitro digestibility compared to the usual maize-based products. The level of stachyose and raffinose were greatly reduced in the extruded products compared to raw soya. Formulations using various additives yielded products suitable for different consumers' preferences such as hot, sweet, bland, gritty or crispy and acceptable to taste assessors. Soyabari snack sticks were equally acceptable as Bombay mix, a product on the market in London. Sensory analysis showed no significant differences in the two products but the crude fibre content of Bombay mix was higher while the protein was slightly lower than for soyabari sticks. Local ingredients can produce acceptable extrudates.

The dissociative chemisorption of methane on Ni(100) and Ni(111): Classical and quantum studies based on the reaction path Hamiltonian

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mastromatteo, Michael; Jackson, Bret, E-mail: jackson@chem.umass.edu

Electronic structure methods based on density functional theory are used to construct a reaction path Hamiltonian for CH{sub 4} dissociation on the Ni(100) and Ni(111) surfaces. Both quantum and quasi-classical trajectory approaches are used to compute dissociative sticking probabilities, including all molecular degrees of freedom and the effects of lattice motion. Both approaches show a large enhancement in sticking when the incident molecule is vibrationally excited, and both can reproduce the mode specificity observed in experiments. However, the quasi-classical calculations significantly overestimate the ground state dissociative sticking at all energies, and the magnitude of the enhancement in sticking with vibrationalmore » excitation is much smaller than that computed using the quantum approach or observed in the experiments. The origin of this behavior is an unphysical flow of zero point energy from the nine normal vibrational modes into the reaction coordinate, giving large values for reaction at energies below the activation energy. Perturbative assumptions made in the quantum studies are shown to be accurate at all energies studied.« less

The Hockey Stick and the Climate Wars: Dispatches From The Front Lines

NASA Astrophysics Data System (ADS)

Mann, M. E.

2011-12-01

A central figure in the controversy over human-caused climate change has been The Hockey Stick, a simple, easy-to-understand graph my colleagues and I constructed to depict changes in Earth's temperature back to 1000 AD. The graph was featured in the high-profile Summary for Policy Makers of the 2001 report of the Intergovernmental Panel on Climate Change (IPCC), and it quickly became an icon in the debate over human-caused (anthropogenic) climate change. I will tell the story behind the Hockey Stick, using it as a vehicle for exploring broader issues regarding the role of skepticism in science, the uneasy relationship between science and politics, and the dangers that arise when special economic interests and those who do their bidding attempt to skew the discourse over policy-relevant areas of science. In short, I attempt to use the Hockey Stick to cut through the fog of disinformation that has been generated by the campaign to deny the reality of climate change. It is my intent, in so doing, to reveal the very real threat to our future that lies behind it.

Waffle Production: Influence of Baking Plate Material on Sticking of Waffles.

PubMed

Huber, Regina; Kalss, Georg; Schoenlechner, Regine

2017-01-01

Background of this study was to understand the factors that contribute to sticking of fresh egg waffles on baking plates. The aim of this study was to investigate the sticking (adhesion) behavior of waffles on 4 different baking plate materials (ductile iron, grey iron, low alloyed steel, and steel with titanium nitrite coating) at different baking parameters (temperature and time) and application of 3 different release agents (different fat compositions). Baking plates from ductile and grey iron showed lower release properties of waffles than the 2 steel baking plates. Baking parameters had to be high enough to allow rapid product crust formation but prevent burning, which again increases sticking behavior. Release agents based on short-chain fatty acids with higher degree of saturation provided better release behavior of waffles than those based on long-chain fatty acids or on emulsifier-acid combinations. Baking plates with increased hardness, good heat storage capacity, and smooth surface seemed to be best suitable. Further research on appropriate coating material might be promising for future. © 2016 Institute of Food Technologists®.

Custom-Made Finger Guard to Prevent Wire-Stick Injury to the Operator's Finger while Performing Intermaxillary Fixation.

PubMed

Kumaresan, Ramesh; Ponnusami, Karthikeyan; Karthikeyan, Priyadarshini

2014-12-01

The treatment of maxillofacial fractures involves different methods from bandages and splinting to methods of open reduction and internal fixation and usually requires control of the dental occlusion with the help of intermaxillary fixation (IMF). Different wiring techniques have been used to aid in IMF including placement of custom-made arch bars, eyelet etc. However, these wiring techniques are with a constant danger of trauma to the surgeon's fingers by their sharp ends. Though there exist a variety of commercially available barrier products and customized techniques to prevent wire-stick injury, cost factor, touch sensitivity, and comfort aspect restrain their acquirement and exploit. This technical note describes the construction of a simple and economical finger guard made of soft thermoplastic material that provides an added protection to fingers from wire-stick type injuries, and its flexible nature permits a comfortable finger flexion movement and acceptable touch sensitivity. This is a simple, economical, reusable puncture, and cut-resistance figure guard by which we can avoid wire-stick type injury to the operator's fingers during wiring technique.

The effect of vacuum packaging on histamine changes of milkfish sticks at various storage temperatures.

PubMed

Kung, Hsien-Feng; Lee, Yi-Chen; Lin, Chiang-Wei; Huang, Yu-Ru; Cheng, Chao-An; Lin, Chia-Min; Tsai, Yung-Hsiang

2017-10-01

The effects of polyethylene packaging (PEP) (in air) and vacuum packaging (VP) on the histamine related quality of milkfish sticks stored at different temperatures (-20°C, 4°C, 15°C, and 25°C) were studied. The results showed that the aerobic plate count (APC), pH, total volatile basic nitrogen (TVBN), and histamine contents increased as storage time increased when the PEP and VP samples were stored at 25°C. At below 15°C, the APC, TVBN, pH, and histamine levels in PEP and VP samples were retarded, but the VP samples had considerably lower levels of APC, TVBN, and histamine than PEP samples. Once the frozen fish samples stored at -20°C for 2 months were thawed and stored at 25°C, VP retarded the increase of histamine in milkfish sticks as compared to PEP. In summary, this result suggested the milkfish sticks packed with VP and stored below 4°C could prevent deterioration of product quality and extend shelf-life. Copyright © 2017. Published by Elsevier B.V.

A geophone wireless sensor network for investigating glacier stick-slip motion

NASA Astrophysics Data System (ADS)

Martinez, Kirk; Hart, Jane K.; Basford, Philip J.; Bragg, Graeme M.; Ward, Tyler; Young, David S.

2017-08-01

We have developed an innovative passive borehole geophone system, as part of a wireless environmental sensor network to investigate glacier stick-slip motion. The new geophone nodes use an ARM Cortex-M3 processor with a low power design capable of running on battery power while embedded in the ice. Only data from seismic events was stored, held temporarily on a micro-SD card until they were retrieved by systems on the glacier surface which are connected to the internet. The sampling rates, detection and filtering levels were determined from a field trial using a standard commercial passive seismic system. The new system was installed on the Skalafellsjökull glacier in Iceland and provided encouraging results. The results showed that there was a relationship between surface melt water production and seismic event (ice quakes), and these occurred on a pattern related to the glacier surface melt-water controlled velocity changes (stick-slip motion). Three types of seismic events were identified, which were interpreted to reflect a pattern of till deformation (Type A), basal sliding (Type B) and hydraulic transience (Type C) associated with stick-slip motion.

Reduced-order modeling approach for frictional stick-slip behaviors of joint interface

NASA Astrophysics Data System (ADS)

Wang, Dong; Xu, Chao; Fan, Xuanhua; Wan, Qiang

2018-03-01

The complex frictional stick-slip behaviors of mechanical joint interface have a great effect on the dynamic properties of assembled structures. In this paper, a reduced-order modeling approach based on the constitutive Iwan model is proposed to describe the stick-slip behaviors of joint interface. An improved Iwan model is developed to describe the non-zero residual stiffness at macro-slip regime and smooth transition of joint stiffness from micro-slip to macro-slip regime, and the power-law relationship of energy dissipation during the micro-slip regime. In allusion to these nonlinear behaviors, the finite element method is used to calculate the recycle force under monolithic loading and the energy dissipation per cycle under oscillatory loading. The proposed model is then used to predict the nonlinear stick-slip behaviors of joint interface by curve-fitting to the results of finite element analysis, and the results show good agreements with the finite element analysis. A comparison with the experiment results in literature is also made. The proposed model agrees very well with the experiment results.

Effect of Arrangement of Stick Figures on Estimates of Proportion in Risk Graphics

PubMed Central

Ancker, Jessica S.; Weber, Elke U.; Kukafka, Rita

2017-01-01

Background Health risks are sometimes illustrated with stick figures, with a certain proportion colored to indicate they are affected by the disease. Perception of these graphics may be affected by whether the affected stick figures are scattered randomly throughout the group or arranged in a block. Objective To assess the effects of stick-figure arrangement on first impressions of estimates of proportion, under a 10-s deadline. Design Questionnaire. Participants and Setting Respondents recruited online (n = 100) or in waiting rooms at an urban hospital (n = 65). Intervention Participants were asked to estimate the proportion represented in 6 unlabeled graphics, half randomly arranged and half sequentially arranged. Measurements Estimated proportions. Results Although average estimates were fairly good, the variability of estimates was high. Overestimates of random graphics were larger than overestimates of sequential ones, except when the proportion was near 50%; variability was also higher with random graphics. Although the average inaccuracy was modest, it was large enough that more than one quarter of respondents confused 2 graphics depicting proportions that differed by 11 percentage points. Low numeracy and educational level were associated with inaccuracy. Limitations Participants estimated proportions but did not report perceived risk. Conclusions Randomly arranged arrays of stick figures should be used with care because viewers’ ability to estimate the proportion in these graphics is so poor that moderate differences between risks may not be visible. In addition, random arrangements may create an initial impression that proportions, especially large ones, are larger than they are. PMID:20671209

Functionally Different Pads on the Same Foot Allow Control of Attachment: Stick Insects Have Load-Sensitive “Heel” Pads for Friction and Shear-Sensitive “Toe” Pads for Adhesion

PubMed Central

Labonte, David; Federle, Walter

2013-01-01

Stick insects (Carausius morosus) have two distinct types of attachment pad per leg, tarsal “heel” pads (euplantulae) and a pre-tarsal “toe” pad (arolium). Here we show that these two pad types are specialised for fundamentally different functions. When standing upright, stick insects rested on their proximal euplantulae, while arolia were the only pads in surface contact when hanging upside down. Single-pad force measurements showed that the adhesion of euplantulae was extremely small, but friction forces strongly increased with normal load and coefficients of friction were 1. The pre-tarsal arolium, in contrast, generated adhesion that strongly increased with pulling forces, allowing adhesion to be activated and deactivated by shear forces, which can be produced actively, or passively as a result of the insects' sprawled posture. The shear-sensitivity of the arolium was present even when corrected for contact area, and was independent of normal preloads covering nearly an order of magnitude. Attachment of both heel and toe pads is thus activated partly by the forces that arise passively in the situations in which they are used by the insects, ensuring safe attachment. Our results suggest that stick insect euplantulae are specialised “friction pads” that produce traction when pressed against the substrate, while arolia are “true” adhesive pads that stick to the substrate when activated by pulling forces. PMID:24349156

Sensory neuroanatomy of stick insects highlights the evolutionary diversity of the orthopteroid subgenual organ complex.

PubMed

Strauß, Johannes; Lakes-Harlan, Reinhard

2013-11-01

The subgenual organ is a scolopidial sense organ located in the tibia of many insects. In this study the neuroanatomy of the subgenual organ complex of stick insects is clarified for two species, Carausius morosus and Siyploidea sipylus. Neuronal tracing shows a subgenual organ complex that consists of a subgenual organ and a distal organ. There are no differences in neuroanatomy between the three thoracic leg pairs, and the sensory structures are highly similar in both species. A comparison of the neuroanatomy with other orthopteroid insects highlights two features unique in Phasmatodea. The subgenual organ contains a set of densely arranged sensory neurons in the anterior-ventral part of the organ, and a distal organ with 16-17 scolopidial sensilla in C. morosus and 20-22 scolopidial sensilla in S. sipylus. The somata of sensory neurons in the distal organ are organized in a linear array extending distally into the tibia, with only a few exceptions of closely associated neurons. The stick insect sense organs show a case of an elaborate scolopidial sense organ that evolved in addition to the subgenual organ. The neuroanatomy of stick insects is compared to that studied in other orthopteroid taxa (cockroaches, locusts, crickets, tettigoniids). The comparison of sensory structures indicates that elaborate scolopidial organs have evolved repeatedly among orthopteroids. The distal organ in stick insects has the highest number of sensory neurons known for distal organs so far. Copyright © 2013 Wiley Periodicals, Inc.

Is There Any Effect on Smell and Taste Functions with Levothyroxine Treatment in Subclinical Hypothyroidism?

PubMed

Baskoy, Kamil; Ay, Seyid Ahmet; Altundag, Aytug; Kurt, Onuralp; Salihoglu, Murat; Deniz, Ferhat; Tekeli, Hakan; Yonem, Arif; Hummel, Thomas

2016-01-01

Subclinical hypothyroidism has been accused for coronary heart disease, lipid metabolism disorders, neuropsychiatric disorders, infertility or pregnancy related problems with various strength of evidence. Currently there is insufficient knowledge about olfaction and taste functions in subclinical hypothyroidism. Aim of the present study is to investigate the degree of smell and taste dysfunction in patients with subclinical hypothyroidism. 28 subclinical hypothyroid patients, and 31 controls enrolled in the prospective study in Istanbul, Turkey. Subclinical hypothyroid patients were treated with L-thyroxine for 3 months. Psychophysiological olfactory testing was performed using odor dispensers similar to felt-tip pens ("Sniffin' Sticks", Burghart, Wedel, Germany). Taste function tests were made using "Taste Strips" (Burghart, Wedel, Germany) which are basically tastant adsorbed filter paper strip. Patients scored lower on psychophysical olfactory tests than controls (odor thresholds:8.1±1.0 vs 8.9±1.1, p = 0.007; odor discrimination:12.4±1.3 vs 13.1±0.9, p = 0.016; odor identification:13.1±0.9 vs 14.0±1.1, p = 0.001; TDI score: 33.8±2.4 vs 36.9±2.1, p = 0.001). In contrast, results from psychophysical gustatory tests showed only a decreased score for "bitter" in patients, but not for other tastes (5.9±1.8 vs 6.6±1.0, p = 0.045). Three month after onset of treatment olfactory test scores already indicated improvement (odor thresholds:8.1±1.0 vs 8.6±0.6, p<0.001; odor discrimination:12.4±1.31 vs 12.9±0.8, p = 0.011; odor identification:13.1±0.9 vs 13.9±0.8, p<0.001; TDI scores:33.8±2.4 vs 35.5±1.7, p<0.001) respectively. Taste functions did not differ between groups for sweet, salty and, sour tastes but bitter taste was improved after 3 months of thyroxin substitution (patients:5.9±1.8 vs 6.6±1.2, p = 0.045). Correlation of changes in smell and taste, with thyroid function test were also evaluated. TSH, fT4 were found have no correlation with smell and taste changes with treatment. However bitter taste found positively correlated with T3 with treatment(r: 0.445, p: 0.018). Subclinical hypothyroid patients exhibited a significantly decreased olfactory sensitivity; in addition, bitter taste was significantly affected. Most importantly, these deficits can be remedied on average within 3 months with adequate treatment.

Analysis of chemosensory function in patients with chronic Eustachian tube dysfunction prior to and after balloon dilatation.

PubMed

Ute, Walliczek-Dworschak; Lisa, Schmierer; Brandon, Greene; Robert, Pellegrino; Philipp, Dworschak; Stuck, Boris Alexander; Christian, Güldner

2018-10-01

Eustachian tube dysfunction (ETD) affects approximately 1% of adults in the general population. Non treated Eustachian tube dysfunction can result in chronic middle ear diseases, which have been shown to significantly affect taste sensitivity. A promising treatment is balloon dilatation of the Eustachian tube. The primary aim of the present study was to investigate whether individuals with ETD had impairment in chemosensory functions, and the changes of the chemosensory function after balloon dilatation of the Eustachian tube. 26 patients (17 female, 9 male) (=56 ears) suffering from ETD with a mean age of 39±15years were included in the present study. 20 patients (76%) returned to be evaluated at the follow up (=40 ears) 51±22days after balloon dilatation. For pre- and post operation, gustatory function was measured with a lateralized gustatory test with the taste strips and olfactory function was tested by means of the Sniffin' Sticks test battery (threshold, discrimination and identification (ID)). Patients' baseline taste function (summed taste score 9.8±3.5 (mean±SD)) was significantly impaired compared to normative data (summed taste score 12.4±2.3; p=0.002). After balloon dilatation of the Eustachian tube, the taste function remained stable (summed taste score 9.4±4.3; p=0.814). Olfactory function (odor ID, summed score (TDI)) improved postoperatively (TDI 32.4±3.6) compared to pre-operative scores (TDI 33.6±4.0; p=0.012), but not to a clinically relevant extent. This study suggests, that patients suffering from ETD exhibit reduced taste scores. Balloon dilatation of the Eustachian tube does not seem to influence gustatory function, but olfactory function showed improvement. Copyright © 2018 Elsevier B.V. All rights reserved.

Sensitivity and Specificity of an Operon Immunochromatographic Test in Serum and Whole-Blood Samples for the Diagnosis of Trypanosoma cruzi Infection in Spain, an Area of Nonendemicity

PubMed Central

Flores-Chavez, María; Cruz, Israel; Nieto, Javier; Gárate, Teresa; Navarro, Miriam; Pérez-Ayala, Ana; López-Vélez, Rogelio

2012-01-01

Trypanosoma cruzi infection is an imported parasitic disease in Spain, and the majority of infected individuals are in the chronic phase of the disease. This study evaluated the sensitivity and specificity of the Operon immunochromatographic test (ICT-Operon; Simple Stick Chagas and Simple Chagas WB [whole blood]; Operon S.A., Spain) for different biological samples. Well-characterized serum samples were obtained from chagasic patients (n = 63), nonchagasic individuals (n = 95), visceral leishmaniasis patients (n = 38), and malaria patients (n = 55). Noncharacterized specimens were obtained from Latin American immigrants and individuals at risk with a clinical and/or epidemiological background: these specimens were recovered serum or plasma samples (n = 450), whole peripheral blood (n = 94), and capillary blood (n = 282). The concordance of the results by enzyme-linked immunosorbent assay and indirect immunofluorescence test was considered to be the “gold standard” for diagnosis. Serum and plasma samples were analyzed by Stick Chagas, and whole blood was analyzed by Simple Chagas WB. The sensitivity and specificity of the ICT-Operon in well-characterized samples were 100% and 97.9%, respectively. No cross-reactivity was found with samples obtained from visceral leishmaniasis patients. In contrast, a false-positive result was obtained in 27.3% of samples from malaria patients. The sensitivities of the rapid test in noncharacterized serum or plasma, peripheral blood, and capillary blood samples were 100%, 92.1%, and 86.4%, respectively, while the specificities were 91.6%, 93.6%, and 95% in each case. ICT-Operon showed variable sensitivity, depending on the kind of sample, performing better when serum or plasma samples were used. It could therefore be used for serological screening combined with any other conventional test. PMID:22761296

Next generation sequencing of oral microbiota in Type 2 diabetes mellitus prior to and after neem stick usage and correlation with serum monocyte chemoattractant-1.

PubMed

Anbalagan, Rubini; Srikanth, Padma; Mani, Monika; Barani, Ramya; Seshadri, Krishna G; Janarthanan, R

2017-08-01

Oral microbiome impacts health and disease. T2DM and periodontitis are associated. Neem (Azadiracta indica) has antibacterial activity against oral microbiota. To characterize oral microbiota (OMB) in saliva samples of T2DM patients by Next generation sequencing. To analyze MCP-1 levels among the T2DM patients before and after a month of neem stick usage as a toothbrush. Blood and saliva samples were collected from adult T2DM patients before and after the neem stick usage. Metagenomic sequencing was performed on saliva samples targeting V6 region of 16s rRNA. Serum MCP-1 levels were determined using a quantitative sandwich Human MCP-1 standard ABTS development kit (Peprotech, USA). The profile of oral microbiota of T2DM patients (n=24) consists of Streptococcus (95.8%) counts ranging from 2644 to 27,214, Veillonella (72.2%, counts 25-19,709, Neisseria (87.5%) 453-33,445), Rothia (63.6%, 233-6734), Actinomycetes (25%, 161-3730), Fusobacterium (21%, 2252-21,334), and Pigmentiphaga (12.5% 3-16,644). Oral microbiota in healthy controls (n=10), consists of Streptococcus (26.1%), Veillonella (21.9%), Neisseria (16.9%), Haemophilus (10.7%), Actinomycetes (2.6%), Rothia (3.1%), Oribacterium (1.7%). Post neem samples showed drastic reduction in the load of bacteria which was statistically significant. The mean serum MCP-1 before the use of neem stick was 265.18±79.44 (range 141.6-980.5pg/ml) and dropped to 33.6±7.35 after a month of neem stick usage (P value>0.001). OMB of T2DM patients and healthy controls were similar, however bacterial loads were significantly higher in T2DM patients. Use of neem stick has a statistically significant reduction on bacterial loads and MCP-1 levels in T2DM patients. Copyright © 2017 Elsevier B.V. All rights reserved.

Early evidence of San material culture represented by organic artifacts from Border Cave, South Africa

PubMed Central

d’Errico, Francesco; Backwell, Lucinda; Villa, Paola; Degano, Ilaria; Lucejko, Jeannette J.; Bamford, Marion K.; Higham, Thomas F. G.; Colombini, Maria Perla; Beaumont, Peter B.

2012-01-01

Recent archaeological discoveries have revealed that pigment use, beads, engravings, and sophisticated stone and bone tools were already present in southern Africa 75,000 y ago. Many of these artifacts disappeared by 60,000 y ago, suggesting that modern behavior appeared in the past and was subsequently lost before becoming firmly established. Most archaeologists think that San hunter–gatherer cultural adaptation emerged 20,000 y ago. However, reanalysis of organic artifacts from Border Cave, South Africa, shows that the Early Later Stone Age inhabitants of this cave used notched bones for notational purposes, wooden digging sticks, bone awls, and bone points similar to those used by San as arrowheads. A point is decorated with a spiral groove filled with red ochre, which closely parallels similar marks that San make to identify their arrowheads when hunting. A mixture of beeswax, Euphorbia resin, and possibly egg, wrapped in vegetal fibers, dated to ∼40,000 BP, may have been used for hafting. Ornaments include marine shell beads and ostrich eggshell beads, directly dated to ∼42,000 BP. A digging stick, dated to ∼39,000 BP, is made of Flueggea virosa. A wooden poison applicator, dated to ∼24,000 BP, retains residues with ricinoleic acid, derived from poisonous castor beans. Reappraisal of radiocarbon age estimates through Bayesian modeling, and the identification of key elements of San material culture at Border Cave, places the emergence of modern hunter–gatherer adaptation, as we know it, to ∼44,000 y ago. PMID:22847420

Early evidence of San material culture represented by organic artifacts from Border Cave, South Africa.

PubMed

d'Errico, Francesco; Backwell, Lucinda; Villa, Paola; Degano, Ilaria; Lucejko, Jeannette J; Bamford, Marion K; Higham, Thomas F G; Colombini, Maria Perla; Beaumont, Peter B

2012-08-14

Recent archaeological discoveries have revealed that pigment use, beads, engravings, and sophisticated stone and bone tools were already present in southern Africa 75,000 y ago. Many of these artifacts disappeared by 60,000 y ago, suggesting that modern behavior appeared in the past and was subsequently lost before becoming firmly established. Most archaeologists think that San hunter-gatherer cultural adaptation emerged 20,000 y ago. However, reanalysis of organic artifacts from Border Cave, South Africa, shows that the Early Later Stone Age inhabitants of this cave used notched bones for notational purposes, wooden digging sticks, bone awls, and bone points similar to those used by San as arrowheads. A point is decorated with a spiral groove filled with red ochre, which closely parallels similar marks that San make to identify their arrowheads when hunting. A mixture of beeswax, Euphorbia resin, and possibly egg, wrapped in vegetal fibers, dated to ∼40,000 BP, may have been used for hafting. Ornaments include marine shell beads and ostrich eggshell beads, directly dated to ∼42,000 BP. A digging stick, dated to ∼39,000 BP, is made of Flueggea virosa. A wooden poison applicator, dated to ∼24,000 BP, retains residues with ricinoleic acid, derived from poisonous castor beans. Reappraisal of radiocarbon age estimates through bayesian modeling, and the identification of key elements of San material culture at Border Cave, places the emergence of modern hunter-gatherer adaptation, as we know it, to ∼44,000 y ago.

Stochastic resonance energy harvesting for a rotating shaft subject to random and periodic vibrations: influence of potential function asymmetry and frequency sweep

NASA Astrophysics Data System (ADS)

Kim, Hongjip; Che Tai, Wei; Zhou, Shengxi; Zuo, Lei

2017-11-01

Stochastic resonance is referred to as a physical phenomenon that is manifest in nonlinear systems whereby a weak periodic signal can be significantly amplified with the aid of inherent noise or vice versa. In this paper, stochastic resonance is considered to harvest energy from two typical vibrations in rotating shafts: random whirl vibration and periodic stick-slip vibration. Stick-slip vibrations impose a constant offset in centrifugal force and distort the potential function of the harvester, leading to potential function asymmetry. A numerical analysis based on a finite element method was conducted to investigate stochastic resonance with potential function asymmetry. Simulation results revealed that a harvester with symmetric potential function generates seven times higher power than that with asymmetric potential function. Furthermore, a frequency-sweep analysis also showed that stochastic resonance has hysteretic behavior, resulting in frequency difference between up-sweep and down-sweep excitations. An electromagnetic energy harvesting system was constructed to experimentally verify the numerical analysis. In contrast to traditional stochastic resonance harvesters, the proposed harvester uses magnetic force to compensate the offset in the centrifugal force. System identification was performed to obtain the parameters needed in the numerical analysis. With the identified parameters, the numerical simulations showed good agreement with the experiment results with around 10% error, which verified the effect of potential function asymmetry and frequency sweep excitation condition on stochastic resonance. Finally, attributed to compensating the centrifugal force offset, the proposed harvester generated nearly three times more open-circuit output voltage than its traditional counterpart.

In Flight Evaluation of Active Inceptor Force-Feel Characteristics and Handling Qualities

NASA Technical Reports Server (NTRS)

Lusardi, Jeff A.; Blanken, Chris L.; Ott, Carl Raymond; Malpica, Carlos A.; von Gruenhagen, Wolfgang

2012-01-01

The effect of inceptor feel-system characteristics on piloted handling qualities has been a research topic of interest for many years. Most of the research efforts have focused on advanced fly-by-wire fixed-wing aircraft with only a few studies investigating the effects on rotorcraft. Consequently, only limited guidance is available on how cyclic force-feel characteristics should be set to obtain optimal handling qualities for rotorcraft. To study this effect, the U.S. Army Aeroflightdynamics Directorate working with the DLR Institute of Flight Systems in Germany under Task X of the U.S. German Memorandum of Understanding have been conducting flight test evaluations. In the U.S., five experimental test pilots have completed evaluations of two Mission Task Elements (MTEs) from ADS-33E-PRF and two command/response types for a matrix of center-stick cyclic force-feel characteristics at Moffett Field. In Germany, three experimental test Pilots have conducted initial evaluations of the two MTEs with two command/response types for a parallel matrix of side-stick cyclic force-feel characteristics at WTD-61 in Manching. The resulting data set is used to correlate the effect of changes in natural frequency and damping ratio of the cyclic inceptor on the piloted handling qualities. Existing criteria in ADS-33E and a proposed Handling Qualities Sensitivity Function that includes the effects of the cyclic force-feel characteristics are also evaluated against the data set and discussed.

A new experimental procedure of outgassing rate measurement to obtain more precise deposition properties of materials

NASA Astrophysics Data System (ADS)

Miyazaki, Eiji; Shimazaki, Kazunori; Numata, Osamu; Waki, Miyuki; Yamanaka, Riyo; Kimoto, Yugo

2016-09-01

Outgassing rate measurement, or dynamic outgassing test, is used to obtain outgassing properties of materials, i.e., Total Mass Loss, "TML," and Collected Volatile Condensed Mass, "CVCM." The properties are used as input parameters for executing contamination analysis, e.g., calculating a prediction of deposition mass on a surface in a spacecraft caused by outgassed substances from contaminant sources onboard. It is likely that results obtained by such calculations are affected by the input parameters. Thus, it is important to get a sufficient experimental data set of outgassing rate measurements for extract good outgassing parameters of materials for calculation. As specified in the standard, ASTM E 1559, TML is measured by a QCM sensor kept at cryogenic temperature; CVCMs are measured at certain temperatures. In the present work, the authors propose a new experimental procedure to obtain more precise VCMs from one run of the current test time with the present equipment. That is, two of four CQCMs in the equipment control the temperature to cool step-by-step during the test run. It is expected that the deposition rate, that is sticking coefficient, with respect to temperature could be discovered. As a result, the sticking coefficient can be obtained directly between -50 and 50 degrees C with 5 degrees C step. It looks like the method could be used as an improved procedure for outgassing rate measurement. The present experiment also specified some issues of the new procedure. It will be considered in future work.

Nonspiking local interneurons in insect leg motor control. I. Common layout and species-specific response properties of femur-tibia joint control pathways in stick insect and locust.

PubMed

Büschges, A; Wolf, H

1995-05-01

1. Locusts (Locusta migratoria) and stick insects (Carausius morosus) exhibit different strategies for predator avoidance. Locusts rely primarily on walking and jumping to evade predators, whereas stick insects become cataleptic, catalepsy forming a major component of the twig mimesis exhibited by this species. The neuronal networks that control postural leg movements in locusts and stick insects are tuned differently to their specific behavioral tasks. An important prerequisite for the production of catalepsy in the stick insect is the marked velocity dependency of the control network, which appears to be generated at the level of nonspiking local interneurons. We examined interneuronal pathways in the network controlling the femur-tibia joint of the locust middle leg and compared its properties with those described for the stick insect middle leg. It was our aim to identify possible neural correlates of the species-specific behavior with regard to postural leg motor control. 2. We obtained evidence that the neuronal networks that control the femur-tibia joints in the two species consist of morphologically and physiologically similar--and thus probably homologous--interneurons. Qualitatively, these interneurons receive the same input from the femoral chordotonal organ receptors and they drive the same pools of leg motoneurons in both species. 3. Pathways that contribute to the control of the femur-tibia joint include interneurons that support both "resisting" and "assisting" responses with respect to the motoneuron activity that is actually elicited during reflex movements. Signal processing via parallel, antagonistic pathways therefore appears to be a common principle in insect leg motor control. 4. Differences between the two insect species were found with regard to the processing of velocity information provided by the femoral chordotonal organ. Interneuronal pathways are sensitive to stimulus velocity in both species. However, in the locust there is no marked velocity dependency of the interneuronal responses, whereas in the same interneurons of the stick insect it is pronounced. This characteristic was maintained at the level of the motoneurons controlling the femur-tibia joint. Pathways for postural leg motor control in the locust thus lack an important prerequisite for the generation of catalepsy, that is, a marked velocity dependency.

The Microseismicity of Glacier Sliding

NASA Astrophysics Data System (ADS)

Walter, Fabian; Röösli, Claudia; Kissling, Edi

2017-04-01

Our understanding of glacier and ice sheet basal motion remains incomplete. The past decades have witnessed a shift away from initially proposed hard bed theories towards soft, till-laden beds, which deform and thus participate in basal motion. The theoretical treatment of deformable beds is subject to debate, yet our capability to predict ice sheet flow and ultimately sea level rise is contingent upon correct parameterization of basal motion (Ritz et al., 2015). Both hard and soft bed theories neglect frictional sliding across distinct basal fault planes and elastic deformation in response to sudden dislocation. Over recent years, this view has been repeatedly challenged as more and more studies report seismogenic faulting associated with basal sliding. For instance, large parts of the Whillans Ice Stream at Antarctica's Siple Coast move nearly exclusively during sudden sliding episodes (Wiens et al., 2008). This "stick-slip motion" is difficult to explain with traditional glacier sliding theories but more analogous to earthquake dislocation on tectonic faults. Although the Whillans Ice Stream motion may be an extreme example, there exists evidence for much smaller microseismic stick-slip events beneath the Greenland Ice Sheet and non-polar glaciers (Podolskiy and Walter, 2016). This raises the question how relevant and widespread the stick-slip phenomenon is and if it is necessary to include it into ice sheet models. Here we discuss recent seismic deployments, which focused on detection of stick-slip events beneath the Greenland Ice Sheet and European Alpine Glaciers. For all deployments, a considerable challenge lies in detection of stick-slip seismograms in the presence of a dominant background seismicity associated with surface crevassing. Nevertheless, automatic search algorithms and waveform characteristics provide important insights into temporal variation of stick-slip activity as well as information about fault plane geometry and co-seismic sliding direction. REFERENCES E.A. Podolskiy and F. Walter (2016). Cryo-seismology. Reviews of Geophysics. Ritz, C., Edwards, T. L., Durand, G., Payne, A. J., Peyaud, V., & Hindmarsh, R. C. (2015). Potential sea-level rise from Antarctic ice-sheet instability constrained by observations. Nature, 528(7580), 115-118. Wiens, D. A., Anandakrishnan, S., Winberry, J. P., & King, M. A. (2008). Simultaneous teleseismic and geodetic observations of the stick-slip motion of an Antarctic ice stream. Nature, 453(7196), 770-774.

Olfactory discrimination predicts cognitive decline among community-dwelling older adults

PubMed Central

Sohrabi, H R; Bates, K A; Weinborn, M G; Johnston, A N B; Bahramian, A; Taddei, K; Laws, S M; Rodrigues, M; Morici, M; Howard, M; Martins, G; Mackay-Sim, A; Gandy, S E; Martins, R N

2012-01-01

The presence of olfactory dysfunction in individuals at higher risk of Alzheimer's disease has significant diagnostic and screening implications for preventive and ameliorative drug trials. Olfactory threshold, discrimination and identification can be reliably recorded in the early stages of neurodegenerative diseases. The current study has examined the ability of various olfactory functions in predicting cognitive decline in a community-dwelling sample. A group of 308 participants, aged 46–86 years old, were recruited for this study. After 3 years of follow-up, participants were divided into cognitively declined and non-declined groups based on their performance on a neuropsychological battery. Assessment of olfactory functions using the Sniffin' Sticks battery indicated that, contrary to previous findings, olfactory discrimination, but not olfactory identification, significantly predicted subsequent cognitive decline (odds ratio=0.869; P<0.05; 95% confidence interval=0.764−0.988). The current study findings confirm previously reported associations between olfactory and cognitive functions, and indicate that impairment in olfactory discrimination can predict future cognitive decline. These findings further our current understanding of the association between cognition and olfaction, and support olfactory assessment in screening those at higher risk of dementia. PMID:22832962

Olfactory discrimination predicts cognitive decline among community-dwelling older adults.

PubMed

Sohrabi, H R; Bates, K A; Weinborn, M G; Johnston, A N B; Bahramian, A; Taddei, K; Laws, S M; Rodrigues, M; Morici, M; Howard, M; Martins, G; Mackay-Sim, A; Gandy, S E; Martins, R N

2012-05-22

The presence of olfactory dysfunction in individuals at higher risk of Alzheimer's disease has significant diagnostic and screening implications for preventive and ameliorative drug trials. Olfactory threshold, discrimination and identification can be reliably recorded in the early stages of neurodegenerative diseases. The current study has examined the ability of various olfactory functions in predicting cognitive decline in a community-dwelling sample. A group of 308 participants, aged 46-86 years old, were recruited for this study. After 3 years of follow-up, participants were divided into cognitively declined and non-declined groups based on their performance on a neuropsychological battery. Assessment of olfactory functions using the Sniffin' Sticks battery indicated that, contrary to previous findings, olfactory discrimination, but not olfactory identification, significantly predicted subsequent cognitive decline (odds ratio = 0.869; P<0.05; 95% confidence interval = 0.764-0.988). The current study findings confirm previously reported associations between olfactory and cognitive functions, and indicate that impairment in olfactory discrimination can predict future cognitive decline. These findings further our current understanding of the association between cognition and olfaction, and support olfactory assessment in screening those at higher risk of dementia.

Beaver Activity, Holocene Climate and Riparian Landscape Change Across Stream Scales in the Greater Yellowstone Ecosystem

NASA Astrophysics Data System (ADS)

Levine, R.; Meyer, G. A.

2013-12-01

Beaver (Castor canadensis) have been part of the fluvial and riparian landscape across much of North America since the Pleistocene, increasing channel habitat complexity and expanding riparian landscapes. The fur trade, however, decimated beaver populations by the 1840s, and other human activities have limited beaver in many areas, including parts of the Greater Yellowstone Ecosystem (GYE). Understanding fluctuations in beaver occupation through the Holocene will aid in understanding the natural range of variability in beaver activity as well as climatic and anthropogenic impacts to fluvial systems. We are developing a detailed chronology of beaver-assisted sedimentation and overall fluvial activity for Odell and Red Rock Creeks (basin areas 83 and 99 km2) in Centennial Valley (CV), Montana, to augment related studies on the long-term effects of beaver on smaller GYE fluvial systems (basin areas 0.1-50 km2). In developing the CV chronology, we use the presence of concentrations of beaver-chewed sticks as a proxy for beaver occupancy. Beaver-stick deposits are found in paleochannel and fluvial terrace exposures. The relative ages of exposures were determined by elevation data from airborne LiDAR and ground surveys. Numerical ages were obtained from 36 14C ages (~30 more are pending) of beaver-stick wood collected during investigation of the stratigraphy. Most beaver-stick deposits are associated with ~ 1 meter of fine-grained sediment, interpreted as overbank deposits, commonly overlying gravelly sand or pebble gravel channel deposits which is consistent with enhanced overbank sedimentation associated with active beaver dams in CV streams. The CV deposits differ from those on smaller GYE streams where beaver-stick deposits are associated with abandoned dams (berms), infilled ponds and laminated sediments. The lack of pond-related deposition associated with CV beaver-stick deposits is consistent with frequent dam breaching (≤ 5 years) in the modern channel of Odell Creek. On all GYE streams investigated, beaver have promoted deposition of a large volume of fine-grained organic-rich sediment, but valley-floor aggradation (vertical rise) due to beaver damming is limited to < 2.5 m, the maximum height of beaver dams, except in glacial depressions where filling occurs without damming. Initial beaver-stick deposit ages for CV streams show notable clustering ca. 5200-5000, 3800-3600, and 900-550 cal yr BP, in part consistent with other GYE sites, where ages tend to cluster in colder-wetter intervals. Beaver-stick deposits from 900-550 cal yr BP, however, overlap the drought-prone Medieval Climate Anomaly (MCA) (~1050-650 cal yr BP), a time of major fire-related debris-flow activity in Yellowstone, and minimal beaver-pond sedimentation in smaller GYE streams. The presence of beaver-stick deposits during the MCA may indicate the importance of larger streams like Odell and Red Rock Creeks in maintaining riparian zones and beaver refugia in drought-prone episodes, a critical concern with current and future warming. Overall, the long-term perspective on beaver occupancy in the GYE across a variety of stream scales provides insight into the effects of climate on ecologically critical riparian zones.

STICK INSECT CHEMICAL DEFENSES: POTENTIAL FOR USEFUL CHEMISTRY (ORDER PHASMATODEA)

USDA-ARS?s Scientific Manuscript database

Insects make up the most numerous and diverse group of organisms on the planet, yet make up one of the least explored groups of organisms in natural products research (Dossey, A. T., Nat. Prod Rep. 2010, 27, 1737–1757). For about five years our stick insect chemical defense research has led to sever...

MolPrint3D: Enhanced 3D Printing of Ball-and-Stick Molecular Models

ERIC Educational Resources Information Center

Paukstelis, Paul J.

2018-01-01

The increased availability of noncommercial 3D printers has provided instructors and students improved access to printing technology. However, printing complex ball-and-stick molecular structures faces distinct challenges, including the need for support structures that increase with molecular complexity. MolPrint3D is a software add-on for the…

Identifying Student Use of Ball-and-Stick Images versus Electrostatic Potential Map Images via Eye Tracking

ERIC Educational Resources Information Center

Williamson, Vickie M.; Hegarty, Mary; Deslongchamps, Ghislain; Williamson, Kenneth C., III

2013-01-01

This pilot study examined students' use of ball-and-stick images versus electrostatic potential maps when asked questions about electron density, positive charge, proton attack, and hydroxide attack with six different molecules (two alcohols, two carboxylic acids, and two hydroxycarboxylic acids). Students' viewing of these dual images…

Effect of litter type upon fuel-moisture indicator stick values

Treesearch

W. L. Fons; C. M. Countryman

1950-01-01

Instructions for establishing fire-weather stations in Region 5 have usually specified that the fuel-moisture indicator sticks be placed over a bed of ponderosa pine needles. This specification was made to insure uniform ground-cover effect for all stations. Because ponderosa pine needles are not readily available in all areas of California fire control...

"Sticking Together": The Adolescent Experience of the Cohesion Process in Rural School Counseling Groups

ERIC Educational Resources Information Center

Gray, Tara M.; Rubel, Deborah

2018-01-01

The purpose of this study was to develop a grounded theory of how adolescents experience the cohesion process in rural school counseling groups. A total of 20 individual interviews with 7 participants were conducted. Data analysis generated the central category of the cohesion process as "sticking together," which describes a "tight…

78 FR 76248 - Special Conditions: Airbus, Model A350-900 Series Airplane; Side Stick Controller

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... control columns and wheels. This kind of controller is designed for only one-hand operation. The... same subject: For the Airbus Model A350-900 series airplane equipped with stick controls designed for... Airbus Model A350-900 series airplanes. These airplanes will have a novel or unusual design feature...

D'Nealian Manuscript--An Aid to Reading Development.

ERIC Educational Resources Information Center

Thurber, Donald N.

A new method of continuous stroke manuscript print called D'Nealian Manuscript is challenging the traditional circle-stick method of teaching children how to write. The circle-stick uses component or splinter parts to form whole letters. Children are forced to form all writing with verticle lines and to learn a manuscript print that goes nowhere.…

Recognizing and Nurturing Hidden Creative Potential

ERIC Educational Resources Information Center

Connell, Elizabeth E.

2010-01-01

Peter, 7 years old, spends most of his time playing with his stick alone. After several unsuccessful attempts to get Peter to join his cousins, his aunt asks the boy's parents if they have considered having him evaluated by a psychologist. Peter's parents are not as concerned about the stick behavior as is his aunt. Although the attachment to his…

Preschoolers' Acquisition of Novel Verbs in the Double Object Dative

ERIC Educational Resources Information Center

Arunachalam, Sudha

2017-01-01

Children have difficulty comprehending novel verbs in the double object dative (e.g., "Fred blicked the dog a stick") as compared to the prepositional dative (e.g., "Fred blicked a stick to the dog"). We explored this pattern with 3 and 4 year olds (N = 60). In Experiment 1, we replicated the documented difficulty with the…

78 FR 76736 - Special Conditions: Bombardier Inc., Models BD-500-1A10 and BD-500-1A11 Series Airplanes; Side...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

... operating conditions and configurations, whether normal or non-normal. 2. Pilot control authority: The... Series Airplanes; Side Stick Controllers: Pilot Strength, Pilot Control Authority, and Pilot Control... side stick controllers for pitch and roll control instead of conventional wheels and columns. The...

77 FR 69571 - Special Conditions: Embraer S.A., Model EMB-550 Airplane, Limit Pilot Forces for Sidestick Control

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-20

... wheel or stick controls, is not appropriate for a sidestick controller, because pilot forces are applied... Forces for Sidestick Control AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of... instead of a conventional wheel or control stick. This kind of controller is designed to be operated using...

78 FR 11554 - Special Conditions: Embraer S.A., Model EMB-550 Airplane, Limit Pilot Forces for Sidestick Control

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... wheel or stick controls, is not appropriate for a sidestick controller, because pilot forces are applied... Pilot Forces for Sidestick Control AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final... conventional wheel or control stick. This kind of controller is designed to be operated using only one hand...

Natural oils and waxes: studies on stick bases.

PubMed

Budai, Lívia; Antal, István; Klebovich, Imre; Budai, Marianna

2012-01-01

The objective of the present article was to examine the role of origin and quantity of selected natural oils and waxes in the determination of the thermal properties and hardness of stick bases. The natural oils and waxes selected for the study were sunflower, castor, jojoba, and coconut oils. The selected waxes were yellow beeswax, candelilla wax, and carnauba wax. The hardness of the formulations is a critical parameter from the aspect of their application. Hardness was characterized by the measurement of compression strength along with the softening point, the drop point, and differential scanning calorimetry (DSC). It can be concluded that coconut oil, jojoba oil, and carnauba wax have the greatest influence on the thermal parameters of stick bases.

Stick-slip chaos in a mechanical oscillator with dry friction

NASA Astrophysics Data System (ADS)

Kousaka, Takuji; Asahara, Hiroyuki; Inaba, Naohiko

2018-03-01

This study analyzes a forced mechanical dynamical system with dry friction that can generate chaotic stick-slip vibrations. We find that the dynamics proposed by Yoshitake et al. [Trans. Jpn. Soc. Mech. Eng. C 61, 768 (1995)] can be expressed as a nonautonomous constraint differential equation owing to the static friction force. The object is constrained to the surface of a moving belt by a static friction force from when it sticks to the surface until the force on the object exceeds the maximal static friction force. We derive a 1D Poincaré return map from the constrained mechanical system, and prove numerically that this 1D map has an absolutely continuous invariant measure and a positive Lyapunov exponent, providing strong evidence for chaos.

Hunger state affects both olfactory abilities and gustatory sensitivity.

PubMed

Hanci, Deniz; Altun, Huseyin

2016-07-01

Chemical senses such as odor, taste and appearance are directly related with appetite. Understanding the relation between appetite and flavor is getting more important due to increasing number of obese patients worldwide. The literature on the studies investigating the change in olfactory abilities and gustatory sensitivity mostly performed using food-related odors and tastes rather than standardized tests were developed to study olfaction and gustation. Therefore, results are inconsistent and the relationship between olfactory and gustatory sensitivity with respect to the actual state of human satiety is still not completely understood. Here, for the first time in literature, we investigated the change in both olfactory abilities and gustatory sensitivity in hunger and in satiety using 123 subjects (37 men, 86 women; mean age 31.4 years, age range 21-41 years). The standardized Sniffin' Sticks Extended Test and Taste Strips were used for olfactory testing and gustatory sensitivity, respectively. TDI score (range 1-48) was calculated as the collective scores of odor threshold (T), odor discrimination (D) and odor identification (I). The evaluation was performed in two successive days where the hunger state of test subjects was confirmed by blood glucose test strips (mean blood glucose level 90.0 ± 5.6 mg/dl in hunger and 131.4 ± 8.1 mg/dl in satiety). The results indicated statistically significant decrease in olfaction in satiety compared to hunger (mean TDI 39.3 ± 1.1 in hunger, 37.4 ± 1.1 in satiety, p < 0.001). The comparison of gustatory sensitivity indicated significantly higher sensitivity to sweet, sour and salty in hunger (p < 0.001), but significantly higher sensitivity to bitter tastant in satiety (p < 0.001). With this prospective study, we were able to show that both olfactory abilities and gustatory sensitivity were affected by hunger state.

Methane dissociation on Ni(111): A fifteen-dimensional potential energy surface using neural network method

NASA Astrophysics Data System (ADS)

Shen, Xiangjian; Chen, Jun; Zhang, Zhaojun; Shao, Kejie; Zhang, Dong H.

2015-10-01

In the present work, we develop a highly accurate, fifteen-dimensional potential energy surface (PES) of CH4 interacting on a rigid flat Ni(111) surface with the methodology of neural network (NN) fit to a database consisted of about 194 208 ab initio density functional theory (DFT) energy points. Some careful tests of the accuracy of the fitting PES are given through the descriptions of the fitting quality, vibrational spectrum of CH4 in vacuum, transition state (TS) geometries as well as the activation barriers. Using a 25-60-60-1 NN structure, we obtain one of the best PESs with the least root mean square errors: 10.11 meV for the entrance region and 17.00 meV for the interaction and product regions. Our PES can reproduce the DFT results very well in particular for the important TS structures. Furthermore, we present the sticking probability S0 of ground state CH4 at the experimental surface temperature using some sudden approximations by Jackson's group. An in-depth explanation is given for the underestimated sticking probability.

A method for landing gear modeling and simulation with experimental validation

NASA Technical Reports Server (NTRS)

Daniels, James N.

1996-01-01

This document presents an approach for modeling and simulating landing gear systems. Specifically, a nonlinear model of an A-6 Intruder Main Gear is developed, simulated, and validated against static and dynamic test data. This model includes nonlinear effects such as a polytropic gas model, velocity squared damping, a geometry governed model for the discharge coefficients, stick-slip friction effects and a nonlinear tire spring and damping model. An Adams-Moulton predictor corrector was used to integrate the equations of motion until a discontinuity caused by a stick-slip friction model was reached, at which point, a Runga-Kutta routine integrated past the discontinuity and returned the problem solution back to the predictor corrector. Run times of this software are around 2 mins. per 1 sec. of simulation under dynamic circumstances. To validate the model, engineers at the Aircraft Landing Dynamics facilities at NASA Langley Research Center installed one A-6 main gear on a drop carriage and used a hydraulic shaker table to provide simulated runway inputs to the gear. Model parameters were tuned to produce excellent agreement for many cases.

Learning a stick-balancing task involves task-specific coupling between posture and hand displacements.

PubMed

Cluff, Tyler; Boulet, Jason; Balasubramaniam, Ramesh

2011-08-01

Theories of motor learning argue that the acquisition of novel motor skills requires a task-specific organization of sensory and motor subsystems. We examined task-specific coupling between motor subsystems as subjects learned a novel stick-balancing task. We focused on learning-induced changes in finger movements and body sway and investigated the effect of practice on their coupling. Eight subjects practiced balancing a cylindrical wooden stick for 30 min a day during a 20 day learning period. Finger movements and center of pressure trajectories were recorded in every fifth practice session (4 in total) using a ten camera VICON motion capture system interfaced with two force platforms. Motor learning was quantified using average balancing trial lengths, which increased with practice and confirmed that subjects learned the task. Nonlinear time series and phase space reconstruction methods were subsequently used to investigate changes in the spatiotemporal properties of finger movements, body sway and their progressive coupling. Systematic increases in subsystem coupling were observed despite reduced autocorrelation and differences in the temporal properties of center of pressure and finger trajectories. The average duration of these coupled trajectories increased systematically across the learning period. In short, the abrupt transition between coupled and decoupled subsystem dynamics suggested that stick balancing is regulated by a hierarchical control mechanism that switches from collective to independent control of the finger and center of pressure. In addition to traditional measures of motor performance, dynamical analyses revealed changes in motor subsystem organization that occurred when subjects learned a novel stick-balancing task.

Olfactory cleft computed tomography analysis and olfaction in chronic rhinosinusitis

PubMed Central

Kohli, Preeti; Schlosser, Rodney J.; Storck, Kristina

2016-01-01

Background: Volumetric analysis of the olfactory cleft by using computed tomography has been associated with olfaction in patients with chronic rhinosinusitis (CRS). However, existing studies have not comprehensively measured olfaction, and it thus remains unknown whether correlations differ across specific dimensions of odor perception. Objective: To use comprehensive measures of patient-reported and objective olfaction to evaluate the relationship between volumetric olfactory cleft opacification and olfaction. Methods: Olfaction in patients with CRS was evaluated by using “Sniffin' Sticks” tests and a modified version of the Questionnaire of Olfactory Disorders. Olfactory cleft opacification was quantified by using two- and three-dimensional, computerized volumetric analysis. Correlations between olfactory metrics and olfactory cleft opacification were then calculated. Results: The overall CRS cohort included 26 patients without nasal polyposis (CRSsNP) (68.4%) and 12 patients with nasal polyposis (CRSwNP) (31.6%). Across the entire cohort, total olfactory cleft opacification was 82.8%, with greater opacification in the CRSwNP subgroup compared with CRSsNP (92.3 versus 78.4%, p < 0.001). The percent total volume opacification correlated with the total Sniffin' Sticks score (r = −0.568, p < 0.001) as well as individual threshold, discrimination, and identification scores (p < 0.001 for all). Within the CRSwNP subgroup, threshold (r = −0.616, p = 0.033) and identification (r = −0.647, p = 0.023) remained highly correlated with total volume opacification. In patients with CRSsNP, the threshold correlated with total volume scores (r = −0.457, p = 0.019), with weaker and nonsignificant correlations for discrimination and identification. Correlations between total volume opacification and the Questionnaire of Olfactory Disorders were qualitatively similar to objective olfactory findings in both CRSwNP (r = −0.566, p = 0.070) and CRSsNP (r = −0.310, p = 0.141) subgroups, although neither reached significance. When examined by two-dimensional planes, the percent opacification of the anterior plane had the strongest correlations with objective olfaction. Conclusion: Olfactory cleft opacification correlated with objective measures of olfaction in patients with CRS, which correlated with threshold values in patients with CRSsNP and all dimensions of olfaction in those with CRSwNP. PMID:28124650

Estimating the fuel moisture content of indicator sticks from selected weather variables

Treesearch

Theodore G. Storey

1965-01-01

Equations were developed to predict the fuel moisture content of indicator sticks from the controlling weather variables. Moisture content of ⅛-inch thick basswood slats used in the South and East could be determined with about equal precision by equation in the critical low moisture range or by weighing at fire danger stations. The most useful equation...

50 CFR 660.705 - Prohibitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Possess a light stick on board a longline vessel when fishing west of 150° W. long. and north of the... longline gear north of 23° N. lat. in violation of § 660.712 (c)(1)(iii). (z) Fail to maintain and use blue... fishing under a western Pacific longline limited entry permit issued under § 660.21, possess a light stick...

50 CFR 660.705 - Prohibitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Possess a light stick on board a longline vessel when fishing west of 150° W. long. and north of the.... in violation of § 660.712 (c)(1)(iii). (z) Fail to maintain and use blue dye to prepare thawed bait... permit issued under § 660.21, possess a light stick on board a longline vessel on the high seas of the...

50 CFR 660.705 - Prohibitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Possess a light stick on board a longline vessel when fishing west of 150° W. long. and north of the.... in violation of § 660.712 (c)(1)(iii). (z) Fail to maintain and use blue dye to prepare thawed bait... permit issued under § 660.21, possess a light stick on board a longline vessel on the high seas of the...

50 CFR 660.705 - Prohibitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Possess a light stick on board a longline vessel when fishing west of 150° W. long. and north of the.... in violation of § 660.712 (c)(1)(iii). (z) Fail to maintain and use blue dye to prepare thawed bait... permit issued under § 660.21, possess a light stick on board a longline vessel on the high seas of the...

The Use of Fry (Embalming Fluid and PCP-Laced Cigarettes or Marijuana Sticks) among Crack Cocaine Smokers

ERIC Educational Resources Information Center

Peters, Ronald J.; Williams, Mark; Ross, Michael W.; Atkinson, John; McCurdy, Sherly A.

2009-01-01

Statistics show that the prevalence of crack cocaine use and embalming fluid and phencyclidine (PCP)-laced cigarettes or marijuana sticks, commonly referred to on the street as "fry" or "wet" is a problem; however, the relationship between these substances of abuse and concurrent polydrug use is unknown. In the present study, a…

Entering First-Year Residents' Experiences and Knowledge of Infection Control of Hepatitis B and HIV, at Five University-Affiliated Hospitals.

ERIC Educational Resources Information Center

Goetz, Angella; And Others

1992-01-01

A survey of 149 entering first-year medical residents concerning experiences with and knowledge of infection control investigated occurrence and patterns of accidental needle-sticking and reporting, student immunization for Hepatitis B, and instruction in universal precautions. It is concluded that students are at risk for needle-sticking, but…

Neither a Toddler nor a Stick-in-the-Mud

ERIC Educational Resources Information Center

Smith, Andrea Livi

2011-01-01

The goal of this paper is to express the views from the "outside," from laypeople who want to go to museums, but perhaps find themselves not going very often. Adult visitors to history museums are often treated as either toddlers or sticks-in-the-mud, where they are assumed to break anything they touch, or enjoy didactic lectures. As a result,…

Air Combat Training: Good Stick Index Validation. Final Report for Period 3 April 1978-1 April 1979.

ERIC Educational Resources Information Center

Moore, Samuel B.; And Others

A study was conducted to investigate and statistically validate a performance measuring system (the Good Stick Index) in the Tactical Air Command Combat Engagement Simulator I (TAC ACES I) Air Combat Maneuvering (ACM) training program. The study utilized a twelve-week sample of eighty-nine student pilots to statistically validate the Good Stick…

Method for preventing micromechanical structures from adhering to another object

DOEpatents

Smith, James H.; Ricco, Antonio J.

1998-01-01

A method for preventing micromechanical structures from adhering to another object includes the step of immersing a micromechanical structure and its associated substrate in a chemical species that does not stick to itself. The method can be employed during the manufacture of micromechanical structures to prevent micromechanical parts from sticking or adhering to one another and their associated substrate surface.

Kick Stick Hands-on Challenge: Discover Circuits with PBS's "Design Squad Nation"[TM

ERIC Educational Resources Information Center

Feinberg, Lauren

2011-01-01

This article describes the "Kick Stick" activity from Design Squad Nation, in which kids turn a wooden paint stirrer and circuit into a motorized, spinning arm--then use it to kick a Ping-Pong[R] ball across the floor. Teachers can enrich their students' exploration of circuits and emphasize the engineering design process with "Design Squad…

Impact of Religion on Turkish Early Childhood Teachers' Factuality Judgments and Their Classroom Practice

ERIC Educational Resources Information Center

Kotaman, Hüseyin

2016-01-01

The purpose of this study is to examine the impact of religion on Turkish early childhood teachers' factuality judgments and reasoning. Participants responded following questions about the story of "Moses's stick": 1) Can Moses run water from a dry fountain just by hitting his stick to the ground? 2) Why, or why not? 3) Would you read…