Statistical learning and adaptive decision-making underlie human response time variability in inhibitory control.

PubMed

Ma, Ning; Yu, Angela J

2015-01-01

Response time (RT) is an oft-reported behavioral measure in psychological and neurocognitive experiments, but the high level of observed trial-to-trial variability in this measure has often limited its usefulness. Here, we combine computational modeling and psychophysics to examine the hypothesis that fluctuations in this noisy measure reflect dynamic computations in human statistical learning and corresponding cognitive adjustments. We present data from the stop-signal task (SST), in which subjects respond to a go stimulus on each trial, unless instructed not to by a subsequent, infrequently presented stop signal. We model across-trial learning of stop signal frequency, P(stop), and stop-signal onset time, SSD (stop-signal delay), with a Bayesian hidden Markov model, and within-trial decision-making with an optimal stochastic control model. The combined model predicts that RT should increase with both expected P(stop) and SSD. The human behavioral data (n = 20) bear out this prediction, showing P(stop) and SSD both to be significant, independent predictors of RT, with P(stop) being a more prominent predictor in 75% of the subjects, and SSD being more prominent in the remaining 25%. The results demonstrate that humans indeed readily internalize environmental statistics and adjust their cognitive/behavioral strategy accordingly, and that subtle patterns in RT variability can serve as a valuable tool for validating models of statistical learning and decision-making. More broadly, the modeling tools presented in this work can be generalized to a large body of behavioral paradigms, in order to extract insights about cognitive and neural processing from apparently quite noisy behavioral measures. We also discuss how this behaviorally validated model can then be used to conduct model-based analysis of neural data, in order to help identify specific brain areas for representing and encoding key computational quantities in learning and decision-making.

29 CFR 1471.445 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2010 CFR

2010-07-01

... costs, annul or terminate the transaction, issue a stop work order, or take any other appropriate remedy. ... SUSPENSION (NONPROCUREMENT) Responsibilities of FMCS Officials Regarding Transactions § 1471.445 What action...

21 CFR 1404.445 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2010 CFR

2010-04-01

... may also disallow costs, annul or terminate the transaction, issue a stop work order, or take any... (NONPROCUREMENT) Responsibilities of Office of National Drug Control Policy Officials Regarding Transactions...

75 FR 76759 - Self-Regulatory Organizations; NYSE Amex LLC; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

... To Eliminate Market and Stop Orders in Nasdaq-Listed Securities Traded on the Exchange December 2...--NYSE Amex Equities to eliminate Market and Stop Orders in Nasdaq-listed securities traded on the... eliminate Market and Stop Orders in Nasdaq-listed securities traded on the Exchange. Background Rules 500...

Collective Deceleration: Toward a Compact Beam Dump

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, H.-C.; /Munich, Max Planck Inst. Quantenopt.; Tajima, T.

With the increasing development of laser accelerators, the electron energy is already beyond GeV and even higher in near future. Conventional beam dump based on ionization or radiation loss mechanism is cumbersome and costly, also has radiological hazards. We revisit the stopping power of high-energy charged particles in matter and discuss the associated problem of beam dump from the point of view of collective deceleration. The collective stopping length in an ionized gas can be several orders of magnitude shorter than the Bethe-Bloch and multiple electromagnetic cascades stopping length in solid. At the mean time, the tenuous density of themore » gas makes the radioactivation negligible. Such a compact and non-radioactivating beam dump works well for short and dense bunches, which is typically generated from laser wakefield accelerator.« less

Higgs-stoponium mixing near the stop-antistop threshold

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bodwin, Geoffrey T.; Chung, Hee Sok; Wagner, Carlos E. M.

Supersymmetric extensions of the standard model contain additional heavy neutral Higgs bosons that are coupled to heavy scalar top quarks (stops). This system exhibits interesting field theoretic phenomena when the Higgs mass is close to the stop-antistop production threshold. Existing work in the literature has examined the digluon-to-diphoton cross section near threshold and has focused on enhancements in the cross section that might arise either from the perturbative contributions to the Higgs-to-digluon and Higgs-to-diphoton form factors or from mixing of the Higgs boson with stoponium states. Near threshold, enhancements in the relevant amplitudes that go as inverse powers of themore » stop-antistop relative velocity require resummations of perturbation theory and/or nonperturbative treatments. We present a complete formulation of threshold effects at leading order in the stop-antistop relative velocity in terms of nonrelativistic effective field theory. We give detailed numerical calculations for the case in which the stop-antistop Green’s function is modeled with a Coulomb-Schr¨odinger Green’s function. We find several general effects that do not appear in a purely perturbative treatment. Higgs-stop-antistop mixing effects displace physical masses from the threshold region, thereby rendering the perturbative threshold enhancements inoperative. In the case of large Higgs-stop-antistop couplings, the displacement of a physical state above threshold substantially increases its width, owing to its decay width to a stop-antistop pair, and greatly reduces its contribution to the cross section.« less

The impact of sociodemographic, treatment, and work support on missed work after breast cancer diagnosis

PubMed Central

Mujahid, Mahasin S.; Janz, Nancy K.; Hawley, Sarah T.; Griggs, Jennifer J.; Hamilton, Ann S.; Katz, Steven J.

2016-01-01

Work loss is a potential adverse consequence of cancer. There is limited research on patterns and correlates of paid work after diagnosis of breast cancer, especially among ethnic minorities. Women with non-metastatic breast cancer diagnosed from June 2005 to May 2006 who reported to the Los Angeles County SEER registry were identified and asked to complete the survey after initial treatment (median time from diagnosis = 8.9 months). Latina and African American women were over-sampled. Analyses were restricted to women working at the time of diagnosis, <65 years of age, and who had complete covariate information (N = 589). The outcome of the study was missed paid work (≤ month, >1 month, stopped all together). Approximately 44, 24, and 32% of women missed ≤1 month, >1 month, or stopped working, respectively. African Americans and Latinas were more likely to stop working when compared with Whites [OR for stop working vs. missed ≤1 month: 3.0, 3.4, (P < 0.001), respectively]. Women receiving mastectomy and those receiving chemotherapy were also more likely to stop working, independent of sociodemographic and treatment factors [ORs for stopped working vs. missed ≤1 month: 4.2, P < 0.001; 7.9, P < 0.001, respectively]. Not having a flexible work schedule available through work was detrimental to working [ORs for stopped working 18.9, P < 0.001 after adjusting for sociodemographic and treatment factors]. Many women stop working altogether after a diagnosis of breast cancer, particularly if they are racial/ethnic minorities, receive chemotherapy, or those who are employed in an unsupportive work settings. Health care providers need to be aware of these adverse consequences of breast cancer diagnosis and initial treatment. PMID:19360466

The impact of sociodemographic, treatment, and work support on missed work after breast cancer diagnosis.

PubMed

Mujahid, Mahasin S; Janz, Nancy K; Hawley, Sarah T; Griggs, Jennifer J; Hamilton, Ann S; Katz, Steven J

2010-01-01

Work loss is a potential adverse consequence of cancer. There is limited research on patterns and correlates of paid work after diagnosis of breast cancer, especially among ethnic minorities. Women with non-metastatic breast cancer diagnosed from June 2005 to May 2006 who reported to the Los Angeles County SEER registry were identified and asked to complete the survey after initial treatment (median time from diagnosis = 8.9 months). Latina and African American women were over-sampled. Analyses were restricted to women working at the time of diagnosis, <65 years of age, and who had complete covariate information (N = 589). The outcome of the study was missed paid work (1 month, stopped all together). Approximately 44, 24, and 32% of women missed 1 month, or stopped working, respectively. African Americans and Latinas were more likely to stop working when compared with Whites [OR for stop working vs. missed

22 CFR 513.225 - Failure to adhere to restrictions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... shall not knowingly do business under a covered transaction with a person who is— (1) Debarred or... excluded from the covered transaction. (b) Violation of the restriction under paragraph (a) of this section may result in disallowance of costs, annulment or termination of award, issuance of a stop work order...

All in One Stop? The Accessibility of Work Support Programs at One-Stop Centers.

ERIC Educational Resources Information Center

Richer, Elise; Kubo, Hitomi; Frank, Abbey

The accessibility of work support programs at one-stop centers was examined in a study during which 33 telephone directors or managers of one-stop centers in 22 states were interviewed by telephone. The interviews established the existence of extensive differences between one-stop centers from the standpoint of all aspects of their operation,…

Purring in cats during auscultation: how common is it, and can we stop it?

PubMed

Little, C J L; Ferasin, L; Ferasin, H; Holmes, M A

2014-01-01

When cats purr during examination it is difficult to perform auscultation. The objective of this study was to determine the prevalence of purring in cats during examination, and identify interventions that could be used to stop purring. Cats seen at a first opinion clinic were enrolled in the study and their purring status recorded. Thirty of the purring cats were exposed to up to three different interventions in an attempt to stop purring in a randomised controlled trial including blowing at the ear, use of an ethanol-based aerosol near the cat and proximity to a running tap. The 30 cats in the trial were subjected to a total of 54 attempts to stop purring, proximity to a running tap caused 17 of 21 (81%) cats to stop purring, blowing at the cat's ears worked in 2 of 15 (13%) cats, spraying an aerosol close to the cat was effective in 9 of 18 (50%) cases. In 2 cats (7%), none of the interventions interrupted purring. This study provides evidence that placing a purring cat near a running tap and in proximity to the discharge of an ethanol-based aerosol are effective measures to stop purring in order to allow auscultation. © 2013 British Small Animal Veterinary Association.

22 CFR 1006.325 - What happens if I do business with an excluded person in a covered transaction?

Code of Federal Regulations, 2010 CFR

2010-04-01

... disallow costs, annul or terminate the transaction, issue a stop work order, debar or suspend you, or take... person in a covered transaction? 1006.325 Section 1006.325 Foreign Relations INTER-AMERICAN FOUNDATION GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Responsibilities of Participants Regarding Transactions...

20 CFR 10.207 - May an employee who returns to work, then stops work again due to the effects of the injury...

Code of Federal Regulations, 2012 CFR

2012-04-01

... stops work again due to the effects of the injury, receive COP? 10.207 Section 10.207 Employees... Eligibility for Cop § 10.207 May an employee who returns to work, then stops work again due to the effects of the injury, receive COP? If the employee recovers from disability and returns to work, then becomes...

20 CFR 10.207 - May an employee who returns to work, then stops work again due to the effects of the injury...

Code of Federal Regulations, 2011 CFR

2011-04-01

... stops work again due to the effects of the injury, receive COP? 10.207 Section 10.207 Employees... Eligibility for Cop § 10.207 May an employee who returns to work, then stops work again due to the effects of the injury, receive COP? If the employee recovers from disability and returns to work, then becomes...

20 CFR 10.207 - May an employee who returns to work, then stops work again due to the effects of the injury...

Code of Federal Regulations, 2013 CFR

2013-04-01

... stops work again due to the effects of the injury, receive COP? 10.207 Section 10.207 Employees... Eligibility for Cop § 10.207 May an employee who returns to work, then stops work again due to the effects of the injury, receive COP? If the employee recovers from disability and returns to work, then becomes...

20 CFR 10.207 - May an employee who returns to work, then stops work again due to the effects of the injury...

Code of Federal Regulations, 2014 CFR

2014-04-01

... stops work again due to the effects of the injury, receive COP? 10.207 Section 10.207 Employees... Eligibility for Cop § 10.207 May an employee who returns to work, then stops work again due to the effects of the injury, receive COP? If the employee recovers from disability and returns to work, then becomes...

20 CFR 10.207 - May an employee who returns to work, then stops work again due to the effects of the injury...

Code of Federal Regulations, 2010 CFR

2010-04-01

... stops work again due to the effects of the injury, receive COP? 10.207 Section 10.207 Employees... Eligibility for Cop § 10.207 May an employee who returns to work, then stops work again due to the effects of the injury, receive COP? If the employee recovers from disability and returns to work, then becomes...

Work behaviour during pregnancy in rural China in 2009.

PubMed

Neupane, Subas; Nwaru, Bright I; Wu, Zhuochun; Hemminki, Elina

2014-02-01

To describe the pattern and determinants of working during pregnancy in rural China. A cross-sectional survey was carried out in 2009 in three provinces (Anhui, Chongqing and Shaanxi) in rural China among 3966 mothers who had recently given birth. Multilevel logistic regression was used to examine the determinants of work behaviour during pregnancy. Overall, 39% of the women stopped working during early pregnancy, 32% worked the same throughout pregnancy and the rest decreased their work or stopped later in pregnancy. Women from Anhui (53%) and Chongqing (54%) provinces were more likely to stop work in early pregnancy than women from Shaanxi province (20%). Older women [odds ratio (OR) 0.74, 95% confidence interval (CI) 0.56-0.99], those having two or more children (OR 0.55, 95% CI 0.43-0.69) and non-farmers (OR 0.50, 95% CI 0.65-0.99) were less likely to stop working on the first trimester, but those with higher education (high school OR 1.43, 95% CI 1.05-1.94) were more likely to stop working. Stopping work early was not related to household income and adequacy of prenatal care. Women with two or more children, non-farmers and those from Shaanxi province were more likely to continue to work to the same extent during pregnancy. But those with higher household income and middle and high school were less likely to work the same. Women's working patterns during pregnancy in rural China were polarized: many women stopped working already in early pregnancy, but others continued to work as before. The key determinant of the working patterns was the province of residence.

Optimization of new magnetorheological fluid mount for vibration control of start/stop engine mode

NASA Astrophysics Data System (ADS)

Chung, Jye Ung; Phu, Do Xuan; Choi, Seung-Bok

2015-04-01

The technologies related to saving energy/or green vehicles are actively researched. In this tendency, the problem for reducing exhausted gas is in development with various ways. Those efforts are directly related to the operation of engine which emits exhausted gas. The auto start/stop of vehicle engine when a vehicle stop at road is currently as a main stream of vehicle industry resulting in reducing exhausted gas. However, this technology automatically turns on and off engine frequently. This motion induces vehicle engine to transmit vibration of engine which has large displacement, and torsional impact to chassis. These vibrations causing uncomfortable feeling to passengers are transmitted through the steering wheel and the gear knob. In this work, in order to resolve this vibration issue, a new proposed magnetorheological (MR) fluid based engine mount (MR mount in short) is presented. The proposed MR mount is designed to satisfy large damping force in various frequency ranges. It is shown that the proposed mount can have large damping force and large force ratio which is enough to control unwanted vibrations of engine start/stop mode.

The NOAA OneStop System: From Well-Curated Metadata to Data Discovery

NASA Astrophysics Data System (ADS)

McQuinn, E.; Jakositz, A.; Caldwell, A.; Delk, Z.; Neufeld, D.; Shapiro, J.; Partee, R.; Milan, A.

2017-12-01

The NOAA OneStop project is a pathfinder in the realm of enabling users to search for, discover, and access NOAA data. As the project continues along its path to maturity, it has become evident that three areas are of utmost importance to its success in the Earth science community: ensuring quality metadata, building a robust and scalable backend architecture, and keeping the user interface simple to use. Why is this the case? Because, simply put, we are dealing with all aspects of a Big Data problem: large volumes of disparate data needing to be quickly and easily processed and retrieved. In this presentation we discuss the three key aspects of OneStop architecture and how development in each area must be done through cross-team collaboration in order to succeed. We cover aspects of the web-based user interface and OneStop API and how metadata curators and software engineers have worked together to continually iterate on an ever-improving data discovery tool meant to be used by a variety of users searching across a broad assortment of data types.

2 CFR 180.440 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Responsibilities of Federal Agency Officials Regarding Transactions § 180.440 What action may I take if a primary... the matter for suspension and debarment consideration. You may also disallow costs, annul or terminate the transaction, issue a stop work order, or take any other appropriate remedy. ...

22 CFR 1508.325 - What happens if I do business with an excluded person in a covered transaction?

Code of Federal Regulations, 2010 CFR

2010-04-01

... person, we may disallow costs, annul or terminate the transaction, issue a stop work order, debar or... person in a covered transaction? 1508.325 Section 1508.325 Foreign Relations AFRICAN DEVELOPMENT... Regarding Transactions Doing Business with Other Persons § 1508.325 What happens if I do business with an...

Coherent resonance stop bands in alternating gradient beam transport

NASA Astrophysics Data System (ADS)

Ito, K.; Okamoto, H.; Tokashiki, Y.; Fukushima, K.

2017-06-01

An extensive experimental study is performed to confirm fundamental resonance bands of an intense hadron beam propagating through an alternating gradient linear transport channel. The present work focuses on the most common lattice geometry called "FODO" or "doublet" that consists of two quadrupoles of opposite polarities. The tabletop ion-trap system "S-POD" (Simulator of Particle Orbit Dynamics) developed at Hiroshima University is employed to clarify the parameter-dependence of coherent beam instability. S-POD can provide a non-neutral plasma physically equivalent to a charged-particle beam in a periodic focusing potential. In contrast with conventional experimental approaches relying on large-scale machines, it is straightforward in S-POD to control the doublet geometry characterized by the quadrupole filling factor and drift-space ratio. We verify that the resonance feature does not essentially change depending on these geometric factors. A few clear stop bands of low-order resonances always appear in the same pattern as previously found with the sinusoidal focusing model. All stop bands become widened and shift to the higher-tune side as the beam density is increased. In the space-charge-dominated regime, the most dangerous stop band is located at the bare betatron phase advance slightly above 90 degrees. Experimental data from S-POD suggest that this severe resonance is driven mainly by the linear self-field potential rather than by nonlinear external imperfections and, therefore, unavoidable at high beam density. The instability of the third-order coherent mode generates relatively weak but noticeable stop bands near the phase advances of 60 and 120 degrees. The latter sextupole stop band is considerably enhanced by lattice imperfections. In a strongly asymmetric focusing channel, extra attention may have to be paid to some coupling resonance lines induced by the Coulomb potential. Our interpretations of experimental data are supported by theoretical predictions and systematic multiparticle simulations.

34 CFR 85.325 - What happens if I do business with an excluded person in a covered transaction?

Code of Federal Regulations, 2010 CFR

2010-07-01

... person, we may disallow costs, annul or terminate the transaction, issue a stop work order, debar or... in a covered transaction? 85.325 Section 85.325 Education Office of the Secretary, Department of... Regarding Transactions Doing Business with Other Persons § 85.325 What happens if I do business with an...

21 CFR 1404.325 - What happens if I do business with an excluded person in a covered transaction?

Code of Federal Regulations, 2010 CFR

2010-04-01

... person, we may disallow costs, annul or terminate the transaction, issue a stop work order, debar or... person in a covered transaction? 1404.325 Section 1404.325 Food and Drugs OFFICE OF NATIONAL DRUG CONTROL... Regarding Transactions Doing Business with Other Persons § 1404.325 What happens if I do business with an...

Improving stopping construction to minimize leakage

PubMed Central

Grau, Roy H.; Mazzella, Andrew L.; Martikainen, Anu L.

2015-01-01

The proper sealing of stoppings is an important step in reducing leakage from the intake to the return airways. Leakage and the subsequent loss of ventilation resulting from improperly sealed stoppings can lead to unhealthy and unsafe working conditions. The research presented in this paper investigates the total leakage of a stopping, including air leakage through the stopping, at the stopping perimeter, and through the coalbed. The study also examines sealing considerations for stoppings that are constructed under roof control screen, the effects that wooden wedges had on inhibiting efficient application of polyurethane foam sealant, and airflow leakage through the surrounding coal. The work involved building a stopping in a dead end room of the NIOSH Safety Research Coal Mine and then pressurising the room using compressed air. Stopping leakage was evaluated by measuring air pressure loss in the enclosed room due to the air leakage. Part of the research utilises a diluted soap solution that was applied to the stopping and the surrounding coal to detect air leakage signified by bubble formations. The results show that stopping leakage can be minimised with proper sealing PMID:26379366

Effects of Coulomb Coupling on the Stopping Power of Plasmas

NASA Astrophysics Data System (ADS)

Bernstein, David; Daligault, Jerome; Baalrud, Scott

2017-10-01

Stopping power of charged particles in plasma is important for a detailed understanding of particle and energy transport in plasmas, such as those found in fusion applications. Although stopping power is rather well understood for weakly coupled plasmas, this is less the case for strongly coupled plasmas. In order to shed light on the effects of strong Coulomb coupling, we have conducted detailed molecular dynamics simulations of the stopping power of a One-Component Plasma (OCP) across a wide range of conditions. The OCP allows first-principle computations that are not possible with more complex models, enabling rigorous tests of analytical theories. The molecular dynamics simulations were compared to two analytical theories that attempt to extend traditional weakly-coupled theories into the strong coupling regime. The first is based on the binary approximation, which accounts for strong coupling via an effective scattering cross section derived from the effective potential theory. The second is based on the dielectric function formulation with the inclusion of a local field corrections. Work supported by LANL LDRD project 20150520ER and ir Force Office of Scientific Research under Award Number FA9550-16-1-0221.

Reducing mechanical cross-coupling in phased array transducers using stop band material as backing

NASA Astrophysics Data System (ADS)

Henneberg, J.; Gerlach, A.; Storck, H.; Cebulla, H.; Marburg, S.

2018-06-01

Phased array transducers are widely used for acoustic imaging and surround sensing applications. A major design challenge is the achievement of low mechanical cross-coupling between the single transducer elements. Cross-coupling induces a loss of imaging resolution. In this work, the mechanical cross-coupling between acoustic transducers is investigated for a generic model. The model contains a common backing with two bending elements bonded on top. The dimensions of the backing are small; thus, wave reflections on the backing edges have to be considered. This is different to other researches. The operating frequency in the generic model is set to a low kHz range. Low operating frequencies are typical for surround sensing applications. The influence of the backing on cross-coupling is investigated numerically. In order to reduce mechanical cross-coupling a stop band material is designed. It is shown numerically that a reduction in mechanical cross-coupling can be achieved by using stop band material as backing. The effect is validated with experimental testing.

What Is It Like to Be at Home: The Experiences of Five- to Seven-Year-Old Finnish Children

ERIC Educational Resources Information Center

Kyronlampi-Kylmanen, Taina; Maatta, Kaarina

2012-01-01

What kind of place is the home for the children of today's world where the tight working pace and schedules frame children's lives and transitions between home and day care? The primary significance and value of home is unquestionable for children's development and rarely have the adults stopped in order to listen to the children's thoughts about…

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

In order to stop bacteria from reproducing and causing a disease like tuberculosis, researchers must first block its enzymes' ability to bind with certain molecules. A research team from Brandeis University worked with the Advanced Protein Characterization Facility at Argonne National Laboratory to define 13 different bacterial structures and uncover the mechanism by which their enzymes form and break bonds with molecules. This animation depicts how an enzyme may be inhibited using this knowledge.

Pensions, investments, and taxation.

PubMed

Gerstein, Mitchell

2010-01-01

Having for retirement has become increasingly challenging with retirement plan rules changing along with taxes and investment choices. The only certainty is that everyone needs to save money in order to be able to stop working. The best plan for a small business can be complex and confusing but rewarding if designed properly. There are a number of options available and many factors to consider in choosing the most appropriate plan.

Changes in work behavior during pregnancy in rural Anhui, China from 2001-03 to 2009: a population based cross-sectional study.

PubMed

Neupane, Subas; Nwaru, Bright I; Wu, Zhuochun; Hemminki, Elina

2016-07-08

In low- and middle-income countries, many women continue working later into pregnancy. In our recent study on some areas in rural China, most women stopped working already during the first trimester (≤3 months) of pregnancy. In this paper we aimed to explore whether stopping work during early pregnancy has changed over an 8 year period (between 2001-03 and 2009); we also studied whether the reasons for stopping work early were the same in the two time periods. A population-based cross-sectional survey with a representative sample of new mothers was carried out in one rural county in Anhui Province in 2001-03 (N = 1479 respondents) and in two other rural counties in 2009 (N = 1574 respondents). Both surveys were used to evaluate prenatal care interventions not related to work behavior. The surveys targeted all women who had recently given birth. Multilevel logistic regression analysis was used to examine the determinants of work behavior in the two time periods. There was a big change in the working behavior between the two survey years: in the period 2001-03 6 % and in 2009, 53 % of pregnant women stopped working at ≤3 months (percentage change 839, 95 % CI -15.90 to 1694.49). In 2001-03, 30 % and in 2009, 23 % of pregnant women worked the same as before pregnancy (percentage change -22.30, 95 % CI -90.28 to 45.68). In both time periods women with two children were less likely to stop work at ≤3 months of pregnancy. Non-farmers were more likely in 2001-03 but less likely in 2009 to stop work at ≤3 months of pregnancy. Women with medium township-level income were more likely to maintain the same level of work as before pregnancy in 2001-03, while in 2009 women with high township-level income were less likely to work the same. Stopping work very early during pregnancy appeared to have become very common from 2001-3 to 2009 in rural Anhui, China and was not explained by women's background characteristics.

Creating Workforce Development Systems That Work: A Guide for Practitioners.

ERIC Educational Resources Information Center

Kogan, Deborah; Dickinson, Katherine P.; Fedrau, Ruth; Midling, Michael J.; Wolff, Kristin E.

This guide describes common One-Stop Career Center system-building goals and summarizes strategies used by states and local One-Stop sites to further each goal. Part I, Organizing and Governing One-Stop Systems, has these two chapters: Guiding One-Stop Systems: The State Role; and Building Local Partnerships and Governing One-Stop Systems. Part…

Stop Sale, Use, or Removal Order: WellPlant, Inc. and GST International, Inc.

EPA Pesticide Factsheets

Stop Sale, Use, or Removal Order (“Order”) issued by the U.S. Environmental Protection Agency Region 9 (EPA) to WelIPlant Inc. and GST International, Inc., concerning all pesticide products bearing the name Mold Manager and any alternate brand names.

20 CFR 645.430 - How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act...

Code of Federal Regulations, 2013 CFR

2013-04-01

... to the One-Stop system and Workforce Investment Act (WIA) programs? 645.430 Section 645.430 Employees... GRANTS State Formula Grants Administration § 645.430 How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act (WIA) programs? (a) As provided in the Workforce...

20 CFR 645.430 - How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act...

Code of Federal Regulations, 2014 CFR

2014-04-01

... to the One-Stop system and Workforce Investment Act (WIA) programs? 645.430 Section 645.430 Employees... GRANTS State Formula Grants Administration § 645.430 How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act (WIA) programs? (a) As provided in the Workforce...

20 CFR 645.430 - How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act...

Code of Federal Regulations, 2012 CFR

2012-04-01

... to the One-Stop system and Workforce Investment Act (WIA) programs? 645.430 Section 645.430 Employees... GRANTS State Formula Grants Administration § 645.430 How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act (WIA) programs? (a) As provided in the Workforce...

20 CFR 645.430 - How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act...

Code of Federal Regulations, 2010 CFR

2010-04-01

... to the One-Stop system and Workforce Investment Act (WIA) programs? 645.430 Section 645.430 Employees... GRANTS State Formula Grants Administration § 645.430 How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act (WIA) programs? (a) As provided in the Workforce...

20 CFR 645.430 - How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act...

Code of Federal Regulations, 2011 CFR

2011-04-01

... to the One-Stop system and Workforce Investment Act (WIA) programs? 645.430 Section 645.430 Employees... GRANTS State Formula Grants Administration § 645.430 How does the Welfare-to-Work program relate to the One-Stop system and Workforce Investment Act (WIA) programs? (a) As provided in the Workforce...

Prototyping with Data Dictionaries for Requirements Analysis.

DTIC Science & Technology

1985-03-01

statistical packages and software for screen layout. These items work at a higher level than another category of prototyping tool, program generators... Program generators are software packages which, when given specifications, produce source listings, usually in a high order language such as COBCL...with users and this will not happen if he must stop to develcp a detailed program . [Ref. 241] Hardware as well as software should be considered in

Progress in understanding heavy-ion stopping

NASA Astrophysics Data System (ADS)

Sigmund, P.; Schinner, A.

2016-09-01

We report some highlights of our work with heavy-ion stopping in the energy range where Bethe stopping theory breaks down. Main tools are our binary stopping theory (PASS code), the reciprocity principle, and Paul's data base. Comparisons are made between PASS and three alternative theoretical schemes (CasP, HISTOP and SLPA). In addition to equilibrium stopping we discuss frozen-charge stopping, deviations from linear velocity dependence below the Bragg peak, application of the reciprocity principle in low-velocity stopping, modeling of equilibrium charges, and the significance of the so-called effective charge.

Highly parallel implementation of non-adiabatic Ehrenfest molecular dynamics

NASA Astrophysics Data System (ADS)

Kanai, Yosuke; Schleife, Andre; Draeger, Erik; Anisimov, Victor; Correa, Alfredo

2014-03-01

While the adiabatic Born-Oppenheimer approximation tremendously lowers computational effort, many questions in modern physics, chemistry, and materials science require an explicit description of coupled non-adiabatic electron-ion dynamics. Electronic stopping, i.e. the energy transfer of a fast projectile atom to the electronic system of the target material, is a notorious example. We recently implemented real-time time-dependent density functional theory based on the plane-wave pseudopotential formalism in the Qbox/qb@ll codes. We demonstrate that explicit integration using a fourth-order Runge-Kutta scheme is very suitable for modern highly parallelized supercomputers. Applying the new implementation to systems with hundreds of atoms and thousands of electrons, we achieved excellent performance and scalability on a large number of nodes both on the BlueGene based ``Sequoia'' system at LLNL as well as the Cray architecture of ``Blue Waters'' at NCSA. As an example, we discuss our work on computing the electronic stopping power of aluminum and gold for hydrogen projectiles, showing an excellent agreement with experiment. These first-principles calculations allow us to gain important insight into the the fundamental physics of electronic stopping.

Correlated stopping, proton clusters and higher order proton cumulants

DOE PAGES

Bzdak, Adam; Koch, Volker; Skokov, Vladimir

2017-05-05

Here, we investigate possible effects of correlations between stopped nucleons on higher order proton cumulants at low energy heavy-ion collisions. We find that fluctuations of the number of wounded nucleons N part lead to rather nontrivial dependence of the correlations on the centrality; however, this effect is too small to explain the large and positive four-proton correlations found in the preliminary data collected by the STAR collaboration at √s = 7.7 GeV. We further demonstrate that, by taking into account additional proton clustering, we are able to qualitatively reproduce the preliminary experimental data. We speculate that this clustering may originatemore » either from collective/multi-collision stopping which is expected to be effective at lower energies or from a possible first-order phase transition, or from (attractive) final state interactions. To test these ideas we propose to measure a mixed multi-particle correlation between stopped protons and a produced particle (e.g. pion, antiproton).« less

Dissociating Consciousness from Inhibitory Control: Evidence for Unconsciously Triggered Response Inhibition in the Stop-Signal Task

ERIC Educational Resources Information Center

van Gaal, Simon; Ridderinkhof, K. Richard; van den Wildenberg, Wery P. M.; Lamme, Victor A. F.

2009-01-01

Theories about the functional relevance of consciousness commonly posit that higher order cognitive control functions, such as response inhibition, require consciousness. To test this assertion, the authors designed a masked stop-signal paradigm to examine whether response inhibition could be triggered and initiated by masked stop signals, which…

Stopping distance for high energy jets in weakly coupled quark-gluon plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnold, Peter; Cantrell, Sean; Xiao Wei

2010-02-15

We derive a simple formula for the stopping distance for a high-energy quark traveling through a weakly coupled quark-gluon plasma. The result is given to next-to-leading order in an expansion in inverse logarithms ln(E/T), where T is the temperature of the plasma. We also define a stopping distance for gluons and give a leading-log result. Discussion of stopping distance has a theoretical advantage over discussion of energy loss rates in that stopping distances can be generalized to the case of strong coupling, where one may not speak of individual partons.

Stopping power measurements with the Time-of-Flight (ToF) technique

DOE PAGES

Fontana, Cristiano L.; Chen, Chien-Hung; Crespillo, Miguel L.; ...

2015-11-10

In our review of measurements of the stopping power of ions in matter is presented along with new measurements of the stopping powers of O, Si, Ti, and Au ions in self-supporting thin foils of SiO 2, Nb 2O 5, and Ta 2O 5. Moreover, a Time-of-Flight system at the Ion Beam Materials Laboratory at the University of Tennessee, Knoxville, was used in transmission geometry in order to reduce experimental uncertainties. Finally, the resulting stopping powers show good precision and accuracy and corroborate previously quoted values in the literature. New stopping data are determined.

Stopping power measurements with the Time-of-Flight (ToF) technique

NASA Astrophysics Data System (ADS)

Fontana, Cristiano L.; Chen, Chien-Hung; Crespillo, Miguel L.; Graham, Joseph T.; Xue, Haizhou; Zhang, Yanwen; Weber, William J.

2016-01-01

A review of measurements of the stopping power of ions in matter is presented along with new measurements of the stopping powers of O, Si, Ti, and Au ions in self-supporting thin foils of SiO2, Nb2O5, and Ta2O5. A Time-of-Flight system at the Ion Beam Materials Laboratory at the University of Tennessee, Knoxville, was used in transmission geometry in order to reduce experimental uncertainties. The resulting stopping powers show good precision and accuracy and corroborate previously quoted values in the literature. New stopping data are determined.

A Conceptual Approach for Optimising Bus Stop Spacing

NASA Astrophysics Data System (ADS)

Johar, Amita; Jain, S. S.; Garg, P. k.

2017-06-01

An efficient public transportation system is essential of any country. The growth, development and shape of the urban areas are mainly due to availability of good transportation (Shah et al. in Inst Town Plan India J 5(3):50-59, 1). In developing countries, like India, travel by local bus in a city is very common. The accidents, congestion, pollution and appropriate location of bus stops are the major problems arising in metropolitan cities. Among all the metropolitan cities in India, Delhi has highest percentage of growth of population and vehicles. Therefore, it is important to adopt efficient and effective ways to improve mobility in different metropolitan cities in order to overcome the problem and to reduce the number of private vehicles on the road. The primary objective of this paper is to present a methodology for developing a model for optimum bus stop spacing (OBSS). It describes the evaluation of existing urban bus route, data collection, development of model for optimizing urban bus route and application of model. In this work, the bus passenger generalized cost method is used to optimize the spacing between bus stops. For the development of model, a computer program is required to be written. The applicability of the model has been evaluated by taking the data of urban bus route of Delhi Transport Corporation (DTC) in Excel sheet in first phase. Later on, it is proposed to develop a programming in C++ language. The developed model is expected to be useful to transport planner for rational design of the spacing of bus stops to save travel time and to generalize operating cost. After analysis it is found that spacing between the bus stop comes out to be between 250 and 500 m. The Proposed Spacing of bus stops is done considering the points that they don't come nearer to metro/rail station, entry or exit of flyover and near traffic signal.

Selection and stopping in voluntary action: A meta-analysis and combined fMRI study☆

PubMed Central

Rae, Charlotte L.; Hughes, Laura E.; Weaver, Chelan; Anderson, Michael C.; Rowe, James B.

2014-01-01

Voluntary action control requires selection of appropriate responses and stopping of inappropriate responses. Selection and stopping are often investigated separately, but they appear to recruit similar brain regions, including the pre-supplementary motor area (preSMA) and inferior frontal gyrus. We therefore examined the evidence for overlap of selection and stopping using two approaches: a meta-analysis of existing studies of selection and stopping, and a novel within-subject fMRI study in which action selection and a stop signal task were combined factorially. The novel fMRI study also permitted us to investigate hypotheses regarding a common mechanism for selection and stopping. The preSMA was identified by both methods as common to selection and stopping. However, stopping a selected action did not recruit preSMA more than stopping a specified action, nor did stop signal reaction times differ significantly across the two conditions. These findings suggest that the preSMA supports both action selection and stopping, but the two processes may not require access to a common inhibition mechanism. Instead, the preSMA might represent information about potential actions that is used in both action selection and stopping in order to resolve conflict between competing available responses. PMID:24128740

77 FR 37674 - Koninklijke Ahold N.V./Safeway, Inc.; Analysis of Agreement Containing Consent Orders To Aid...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

...: Giant Carlisle, Giant Landover, Stop & Shop New York Metro, and Stop & Shop New England. Peapod, a grocery delivery service, also is included within Ahold USA. Safeway is one of the largest food-and-drug... products and services provides a ``one-stop shopping'' experience for consumers by enabling them to shop in...

Meeting Employers' Needs: How One-Stop Centers Can Attract Business Customers. Business Assistance Note #6.

ERIC Educational Resources Information Center

Bergman, Terri

The U.S. Department of Labor's One-Stop Career Center initiative is part of the movement of governments to increase the quality and efficiency of their services. One-stop centers bring together public and private resources to meet individuals' and employers' human resource development and labor market needs. In order to meet employers' needs,…

Treatment decisions and employment of breast cancer patients: Results of a population-based survey.

PubMed

Jagsi, Reshma; Abrahamse, Paul H; Lee, Kamaria L; Wallner, Lauren P; Janz, Nancy K; Hamilton, Ann S; Ward, Kevin C; Morrow, Monica; Kurian, Allison W; Friese, Christopher R; Hawley, Sarah T; Katz, Steven J

2017-12-15

Many patients with breast cancer work for pay at the time of their diagnosis, and the treatment plan may threaten their livelihood. Understanding work experiences in a contemporary population-based sample is necessary to inform initiatives to reduce the burden of cancer care. Women who were 20 to 79 years old and had been diagnosed with stage 0 to II breast cancer, as reported to the Georgia and Los Angeles Surveillance, Epidemiology, and End Results registries in 2014-2015, were surveyed. Of the 3672 eligible women, 2502 responded (68%); 1006 who reported working before their diagnosis were analyzed. Multivariate models evaluated correlates of missing work for >1 month and stopping work altogether versus missing work for ≤1 month. In this diverse sample, most patients (62%) underwent lumpectomy; 16% underwent unilateral mastectomy (8% with reconstruction); and 23% underwent bilateral mastectomy (19% with reconstruction). One-third (33%) received chemotherapy. Most (84%) worked full-time before their diagnosis; however, only 50% had paid sick leave, 39% had disability benefits, and 38% had flexible work schedules. Surgical treatment was strongly correlated with missing >1 month of work (odds ratio [OR] for bilateral mastectomy with reconstruction vs lumpectomy, 7.8) and with stopping work altogether (OR for bilateral mastectomy with reconstruction vs lumpectomy, 3.1). Chemotherapy receipt (OR for missing >1 month, 1.3; OR for stopping work altogether, 3.9) and race (OR for missing >1 month for blacks vs whites, 2.0; OR for stopping work altogether for blacks vs whites, 1.7) also correlated. Those with paid sick leave were less likely to stop working (OR, 0.5), as were those with flexible schedules (OR, 0.3). Working patients who received more aggressive treatments were more likely to experience substantial employment disruptions. Cancer 2017;123:4791-9. © 2017 American Cancer Society. © 2017 American Cancer Society.

A comprehensive study of a new versatile microchip device based liquid phase microextraction for stopped-flow and double-flow conditions.

PubMed

Payán, María Ramos; Murillo, Elia Santigosa; Coello, Jordi; López, Miguel Ángel Bello

2018-06-29

A new geometry for a versatile microfluidic-chip device based liquid phase microextraction was developed in order to enhance the preconcentration in microfluidic chips and also to enable double-flow and stopped-flow working modes. The microchip device was combined with a HPLC procedure for the simultaneous determination of two different families as model analytes, which were parabens and non-steroidal anti-inflammatories (NSAIDs): Ethyl 4-hydroxybenzoate (Et-P), Propyl 4-hydroxybenzoate (Pr-P), Butyl 4-hydroxybenzoate (Bu-P), IsoButyl 4-hydroxybenzoate (iBu-P), salycilic acid (SAC), ketoprofen (KET), naproxen (NAX), diclofenac (DIC) and ibuprofen (IBU) in urine samples. The new miniaturized microchip proposed in this work allows not only the possibility of working in double-flow conditions, but also under stagnant conditions (stopped-flow) (SF-μLPME). The sample (pH 1.5) was delivered to the SF-μLPME at 20 μL min -1 while keeping the acceptor phase (pH 11.75) under stagnant conditions during 20 min. The highest enrichment factors (between 16 and 47) were obtained under stopped-flow conditions at 20 μL min -1 (sample flow rate) after 20 min extraction; whereas the extraction efficiencies were within the range of 27-81% for all compounds. The procedure provided very low detection limits between 0.7 and 8.5 μg L -1 with a sample volume consumption of 400 μL. Parabens and NSAIDs have successfully been extracted from urine samples with excellent clean up and recoveries over 90% for all compounds. In parallel, the new device was also tested under double flow conditions, obtaining good but lower enrichment factors (between 9 and 20) and higher extraction efficiencies (between 45 and 95) after 7 min extraction, consuming a volume sample of 140 μL. The versatile device offered very high extraction efficiencies and good enrichment factor for double flow and stopped-flow conditions, respectively. In addition, this new miniaturized SF-μLPME device significantly reduced costs compared to the existing analytical techniques for sample preparation since this microchip require few microliters of sample and reagents and it is reusable. Copyright © 2018 Elsevier B.V. All rights reserved.

From the Orbital Implementation of the Kinetic Theory to the Polarization Propagator Method in the Study of Energy Deposition Problems

NASA Astrophysics Data System (ADS)

Cabrera-Trujillo, R.; Cruz, S. A.; Soullard, J.

The energy deposited by swift atomic-ion projectiles when colliding with a given target material has been a topic of special scientific interest for the last century due to the variety of applications of ion beams in modern materials technology as well as in medical physics. In this work, we summarize our contributions in this field as a consequence of fruitful discussions and enlightening ideas put forward by one of the main protagonists in stopping power theory during the last three decades: Jens Oddershede. Our review, mainly motivated by Jens' work, evolves from the extension of the orbital implementation of the kinetic theory of stopping through the orbital local plasma approximation, its use in studies of orbital and total mean excitation energies for the study of atomic and molecular stopping until the advances on generalized oscillator strength and sum rules in the study of stopping cross sections. Finally, as a tribute to Jens' work on the orbital implementation of the kinetic theory of stopping, in this work we present new results on the use of the Thomas-Fermi-Dirac-Weizsäcker density functional for the calculation of orbital and total atomic mean excitation energies. The results are applied to free-atoms and and extension is done to confined atoms - taking Si as an example - whereby target pressure effects on stopping are derived. Hence, evidence of the far-yield of Jens' ideas is given.

Combined emergency braking and turning of articulated heavy vehicles

NASA Astrophysics Data System (ADS)

Morrison, Graeme; Cebon, David

2017-05-01

'Slip control' braking has been shown to reduce the emergency stopping distance of an experimental heavy goods vehicle by up to 19%, compared to conventional electronic/anti-lock braking systems (EBS). However, little regard has been given to the impact of slip control braking on the vehicle's directional dynamics. This paper uses validated computer models to show that slip control could severely degrade directional performance during emergency braking. A modified slip control strategy, 'attenuated slip demand' (ASD) control, is proposed in order to rectify this. Results from simulations of vehicle performance are presented for combined braking and cornering manoeuvres with EBS and slip control braking with and without ASD control. The ASD controller enables slip control braking to provide directional performance comparable with conventional EBS while maintaining a substantial stopping distance advantage. The controller is easily tuned to work across a wide range of different operating conditions.

Method and apparatus for selectively controlling the speed of an engine

DOEpatents

Davis, Roy Inge

2001-02-27

A control assembly 12 for use within a vehicle 10 having an engine 14 and which selectively controls the speed of the engine 14 in order to increase fuel efficiency and to effect relatively smooth starting and stopping of the engine. Particularly, in one embodiment, control assembly 12 cooperatively operates with a starter/alternator assembly 20 and is adapted for use with hybrid vehicles employing a start/stop powertrain assembly, wherein fuel efficiency is increased by selectively stopping engine operation when the vehicle has stopped.

Stopping electric field extension in a modified nanostructure based on SOI technology - A comprehensive numerical study

NASA Astrophysics Data System (ADS)

Anvarifard, Mohammad K.; Orouji, Ali A.

2017-11-01

This article has related a particular knowledge in order to reduce short channel effects (SCEs) in nano-devices based on silicon-on-insulator (SOI) MOSFETs. The device under study has been designed in 22 nm node technology with embedding Si3N4 extra oxide as a stopping layer of electric field and a useful heatsink for transferring generated heat. Two important subjects (DC characteristics and RF characteristics) have been investigated, simultaneously. Stopping electric field extension and enhancement of channel thermal conduction are introduced as an entrance gateway for this work so that improve the electrical characteristics, eventually. The inserted extra oxide made by the Si3N4 material has a vital impact on the modification of the electrical and thermal features in the proposed device. An immense comparison between the proposed SOI and conventional SOI showed that the proposed structure has higher electrical and thermal proficiency than the conventional structure in terms of main parameters such as short channel effects (SCEs), leakage current, floating body effect (FBE), self-heating effect (SHE), voltage gain, ratio of On-current to Off- current, transconductance, output conductance, minimum noise figure and power gain.

Specifications of a continual reassessment method design for phase I trials of combined drugs†

PubMed Central

Wages, Nolan A.; Conaway, Mark R.

2013-01-01

In studies of combinations of agents in phase I oncology trials, the dose–toxicity relationship may not be monotone for all combinations, in which case the toxicity probabilities follow a partial order. The continual reassessment method for partial orders (PO-CRM) is a design for phase I trials of combinations that leans upon identifying possible complete orders associated with the partial order. This article addresses some practical design considerations not previously undertaken when describing the PO-CRM. We describe an approach in choosing a proper subset of possible orderings, formulated according to the known toxicity relationships within a matrix of combination therapies. Other design issues, such as working model selection and stopping rules, are also discussed. We demonstrate the practical ability of PO-CRM as a phase I design for combinations through its use in a recent trial designed at the University of Virginia Cancer Center. PMID:23729323

[Part time work instead of early retirement: successful breakthrough for flexible and later retirement?].

PubMed

Bäcker, G; Naegele, G

1996-01-01

In order to stop the trend towards early retirement in Germany a law to promote partial retirement recently has been passed by parliament. Concerning the impact on the labour market the raising of the pension age for older unemployed which is fixed in this law has to be seen as contraproductive and it will deteriorate the financial situation of unemployed older workers. Concerning the implementation of partial-retirement as such, there are momentous obstacles to realize part-time working arrangements in practice: the insufficient financial compensation for older workers and the obligation for employers to hire unemployed workers. Supplementary collective agreements are seen to be necessary to establish part-time work for older workers.

P-stop isolation study of irradiated n-in-p type silicon strip sensors for harsh radiation environments

NASA Astrophysics Data System (ADS)

Printz, Martin; CMS Tracker Collaboration

2016-09-01

In order to determine the most radiation hard silicon sensors for the CMS Experiment after the Phase II Upgrade in 2023 a comprehensive study of silicon sensors after a fluence of up to 1.5 ×1015neq /cm2 corresponding to 3000fb-1 after the HL-LHC era has been carried out. The results led to the decision that the future Outer Tracker (20 cm < R < 110 cm) of CMS will consist of n-in-p type sensors. This technology is more radiation hard but also the manufacturing is more challenging compared to p-in-n type sensors due to additional process steps in order to suppress the accumulation of electrons between the readout strips. One possible isolation technique of adjacent strips is the p-stop structure which is a p-type material implantation with a certain pattern for each individual strip. However, electrical breakdown and charge collection studies indicate that the process parameters of the p-stop structure have to be carefully calibrated in order to achieve a sufficient strip isolation but simultaneously high breakdown voltages. Therefore a study of the isolation characteristics with four different silicon sensor manufacturers has been executed in order to determine the most suitable p-stop parameters for the harsh radiation environment during HL-LHC. Several p-stop doping concentrations, doping depths and different p-stop pattern have been realized and experiments before and after irradiation with protons and neutrons have been performed and compared to T-CAD simulation studies with Synopsys Sentaurus. The measurements combine the electrical characteristics measured with a semi-automatic probestation with Sr90 signal measurements and analogue readout. Furthermore, some samples have been investigated with the help of a cosmic telescope with high resolution allowing charge collection studies of MIPs penetrating the sensor between two strips.

Simultaneous modelling of multi-purpose/multi-stop activity patterns and quantities consumed

NASA Astrophysics Data System (ADS)

Roy, John R.; Smith, Nariida C.; Xu, Blake

Whereas for commuting travel there is a one-to-one correspondence between commuters and jobs, and for commodity flows a one-to-one correspondence between the size of orders and the shipping cost of the commodities, the situation is much more complex for retail/service travel. A typical shopper may make a single trip or multi-stop tour to buy/consume a quite diverse set of commodities/services at different locations in quite variable quantities. At the same time, the general pattern of the tour is clearly dependent on the activities and goods available at potential stops. These interdependencies have been alluded to in the literature, especially by spatial economists. However, until some preliminary work by the first author, there has been no attempt to formally include these interdependencies in a general model. This paper presents a framework for achieving this goal by developing an evolutionary set of models starting from the simplest forms available. From the above, it is clear that such interdependency models will inevitably have high dimensionality and combinatorial complexity. This rules out a simultaneous treatment of all the events using an individual choice approach. If an individual choice approach is to be applied in a tractable manner, the set of interdependent events needs to be segmented into several subsets, with simultaneity recognised within each subset, but a mere sequential progression occurring between subsets. In this paper, full event interdependencies are retained at the expense of modelling market segments of consumers rather than a sample of representative individuals. We couple the travel and consumption events in the only feasible way, by modelling the tours as discrete entities, in conjunction with the amount of each commodity consumed per stop on each such tour in terms of the continuous quantities of microeconomics. This is performed both under a budget/income constraint from microeconomics and a time budget constraint from time geography. The model considers both physical trips and tele-orders.

Birth order and sibling sex ratio in homosexual transsexual South Korean men: Effects of the male-preference stopping rule.

PubMed

Zucker, Kenneth J; Blanchard, Ray; Kim, Tae-Suk; Pae, Chi-Un; Lee, Chul

2007-10-01

Two biodemographic variables - birth order and sibling sex ratio - have been examined in several Western samples of homosexual transsexual men. The results have consistently shown that homosexual transsexuals have a later birth order and come from sibships with an excess of brothers to sisters; the excess of brothers has been largely driven by the number of older brothers and hence has been termed the fraternal birth order effect. In the present study the birth order and sibling sex ratio were examined in an Asian sample of 43 homosexual transsexual men and 49 heterosexual control men from South Korea. Although the transsexual men had a significantly late birth order, so did the control men. Unlike Western samples, the Korean transsexuals had a significant excess of sisters, not brothers, as did the control men, and this was largely accounted for by older sisters. It is concluded that a male-preference stopping rule governing parental reproductive behavior had a strong impact on these two biodemographic variables. Future studies that examine birth order and sibling sex ratio in non-Western samples of transsexuals need to be vigilant for the influential role of stopping rules, including the one identified in the present study.

Dosimetric characteristics of electron beams produced by a mobile accelerator for IORT.

PubMed

Pimpinella, M; Mihailescu, D; Guerra, A S; Laitano, R F

2007-10-21

Energy and angular distributions of electron beams with different energies were simulated by Monte Carlo calculations. These beams were generated by the NOVAC7 system (Hitesys, Italy), a mobile electron accelerator specifically dedicated to intra-operative radiation therapy (IORT). The electron beam simulations were verified by comparing the measured dose distributions with the corresponding calculated distributions. As expected, a considerable difference was observed in the energy and angular distributions between the IORT beams studied in the present work and the electron beams produced by conventional accelerators for non-IORT applications. It was also found that significant differences exist between the IORT beams used in this work and other IORT beams with different collimation systems. For example, the contribution from the scattered electrons to the total dose was found to be up to 15% higher in the NOVAC7 beams. The water-to-air stopping power ratios of the IORT beams used in this work were calculated on the basis of the beam energy distributions obtained by the Monte Carlo simulations. These calculated stopping power ratios, s(w,air), were compared with the corresponding s(w,air) values recommended by the TRS-381 and TRS-398 IAEA dosimetry protocols in order to estimate the deviations between a dosimetry based on generic parameters and a dosimetry based on parameters specifically obtained for the actual IORT beams. The deviations in the s(w,air) values were found to be as large as up to about 1%. Therefore, we recommend that a preliminary analysis should always be made when dealing with IORT beams in order to assess to what extent the possible differences in the s(w,air) values have to be accounted for or may be neglected on the basis of the specific accuracy needed in clinical dosimetry.

Low-Order Aberrations in Band-limited Lyot Coronagraphs

NASA Astrophysics Data System (ADS)

Sivaramakrishnan, Anand; Soummer, Rémi; Sivaramakrishnan, Allic V.; Lloyd, James P.; Oppenheimer, Ben R.; Makidon, Russell B.

2005-12-01

We study the way Lyot coronagraphs with unapodized entrance pupils respond to small, low-order phase aberrations. This study is applicable to ground-based adaptive optics coronagraphs operating at 90% and higher Strehl ratios, as well as to some space-based coronagraphs with intrinsically higher Strehl ratio imaging. We utilize a second-order expansion of the monochromatic point-spread function (written as a power spectrum of a power series in the phase aberration over clear aperture) to derive analytical expressions for the response of a ``band-limited'' Lyot coronagraph (BLC) to small, low-order, phase aberrations. The BLC possesses a focal plane mask with an occulting spot whose opacity profile is a spatially band-limited function rather than a hard-edged, opaque disk. The BLC is, to first order, insensitive to tilt and astigmatism. Undersizing the stop in the reimaged pupil plane (the Lyot plane) following the focal plane mask can alleviate second-order effects of astigmatism, at the expense of system throughput and angular resolution. The optimal degree of such undersizing depends on individual instrument designs and goals. Our analytical work engenders physical insight and complements existing numerical work on this subject. Our methods can be extended to treat the passage of higher order aberrations through band-limited Lyot coronagraphs by using our polynomial decomposition or an analogous Fourier approach.

Deceleration system for kinematic linkages of positioning

NASA Astrophysics Data System (ADS)

Stan, G.

2017-08-01

Flexible automation is used more and more in various production processes, so that both machining itself on CNC machine tools and workpiece handling means are performed through programming the needed working cycle. In order to obtain a successful precise positioning, each motion degree needs a certain deceleration before stopping at a programmed point. The increase of motion speed of moving elements within the manipulators structure depends directly on deceleration duty quality before the programmed stop. Proportional valves as well as servo-valves that can perform hydraulic decelerations are well known, but they feature several disadvantages, such as: high price, severe conditions for oil filtering and low reliability under industrial conditions. This work presents a new deceleration system that allows adjustment of deceleration slope according to actual conditions: inertial mass, speed etc. The new solution of hydraulic decelerator allows its integration to a position loop or its usage in case of positioning large elements that only perform fixed cycles. The results being obtained on the positioning accuracy of a linear axis using the new solution of the hydraulic decelerator are presented, too. The price of the new deceleration system is much lower compared to the price of proportional valves or servo-valves.

Reducing duplicate testing: a comparison of two clinical decision support tools.

PubMed

Procop, Gary W; Keating, Catherine; Stagno, Paul; Kottke-Marchant, Kandice; Partin, Mary; Tuttle, Robert; Wyllie, Robert

2015-05-01

Unnecessary duplicate laboratory testing is common and costly. Systems-based means to avert unnecessary testing should be investigated and employed. We compared the effectiveness and cost savings associated with two clinical decision support tools to stop duplicate testing. The Hard Stop required telephone contact with the laboratory and justification to have the duplicate test performed, whereas the Smart Alert allowed the provider to bypass the alert at the point of order entry without justification. The Hard Stop alert was significantly more effective than the Smart Alert (92.3% vs 42.6%, respectively; P < .0001). The cost savings realized per alert activation was $16.08/alert for the Hard Stop alert vs $3.52/alert for the Smart Alert. Structural and process changes that require laboratory contact and justification for duplicate testing are more effective than interventions that allow providers to bypass alerts without justification at point of computerized physician order entry. Copyright© by the American Society for Clinical Pathology.

Localized Fault Recovery for Nested Fork-Join Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kestor, Gokcen; Krishnamoorthy, Sriram; Ma, Wenjing

Nested fork-join programs scheduled using work stealing can automatically balance load and adapt to changes in the execution environment. In this paper, we design an approach to efficiently recover from faults encountered by these programs. Specifically, we focus on localized recovery of the task space in the presence of fail-stop failures. We present an approach to efficiently track, under work stealing, the relationships between the work executed by various threads. This information is used to identify and schedule the tasks to be re-executed without interfering with normal task execution. The algorithm precisely computes the work lost, incurs minimal re-execution overhead,more » and can recover from an arbitrary number of failures. Experimental evaluation demonstrates low overheads in the absence of failures, recovery overheads on the same order as the lost work, and much lower recovery costs than alternative strategies.« less

CRISPR-Mediated Base Editing Enables Efficient Disruption of Eukaryotic Genes through Induction of STOP Codons.

PubMed

Billon, Pierre; Bryant, Eric E; Joseph, Sarah A; Nambiar, Tarun S; Hayward, Samuel B; Rothstein, Rodney; Ciccia, Alberto

2017-09-21

Standard CRISPR-mediated gene disruption strategies rely on Cas9-induced DNA double-strand breaks (DSBs). Here, we show that CRISPR-dependent base editing efficiently inactivates genes by precisely converting four codons (CAA, CAG, CGA, and TGG) into STOP codons without DSB formation. To facilitate gene inactivation by induction of STOP codons (iSTOP), we provide access to a database of over 3.4 million single guide RNAs (sgRNAs) for iSTOP (sgSTOPs) targeting 97%-99% of genes in eight eukaryotic species, and we describe a restriction fragment length polymorphism (RFLP) assay that allows the rapid detection of iSTOP-mediated editing in cell populations and clones. To simplify the selection of sgSTOPs, our resource includes annotations for off-target propensity, percentage of isoforms targeted, prediction of nonsense-mediated decay, and restriction enzymes for RFLP analysis. Additionally, our database includes sgSTOPs that could be employed to precisely model over 32,000 cancer-associated nonsense mutations. Altogether, this work provides a comprehensive resource for DSB-free gene disruption by iSTOP. Copyright © 2017 Elsevier Inc. All rights reserved.

Technology Insertion Engineering Services Masking Process Evaluation Task Order No. 7. (Phase 1). Revision B

DTIC Science & Technology

1989-10-06

spent pumice cleaning. All parts can be pumice cleaned faster by using the method described in Quick Fix Plan paragraph 6.0. Soaking the scrubbed masked...times were run at an unusuall fast pace. For two other days workers were observed masking parts and by excluding the time spent talking and working on...stop-off Lacquer, MICCROSTOP REDUCER is recom. mended. Also, a shot soak in caustic cleaner, both at 212’ F., will break the adhesion and the coating is

[Seventeen years of haemovigilance in France: assessment and outlook].

PubMed

Carlier, M; Vo Mai, M-P; Fauveau, L; Ounnoughene, N; Sandid, I; Renaudier, P

2011-04-01

Since 1994, the French haemovigilance network has not stopped evolving. Based initially on the reporting of informations and incidents related to recipients, it quickly became interested in the procedures and other activities related to blood component transfusion, in order to improve blood safety. Despite some failures (under reporting, heavy declarative management), the French haemovigilance network is going to continue working on improving blood safety, both at the level of the recipients and the donors, and participate to the global improvement of quality of care. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

Design Considerations for a Stopped-Rotor Cyclocopter for Venus Exploration

NASA Technical Reports Server (NTRS)

Husseyin, S.; Warmbrodt, William G.

2016-01-01

This paper considers the use of a cycloidal blade system as a means of providing lift and propulsive thrust as well as combined with a stopped rotor system, to create a stopped-rotor cyclocopter vehicle, during a mission to Venus. This stopped-rotor cyclocopter will be capable of flying at all atmospheric levels of Venus as well as landing on the surface for scientific investigation. Three reference conceptual designs with different stopped-rotor cyclocopter yaw angles are tested in RotCFD as well as a model of a hovering cyclorotor for comparison with past work in the literature and innovative study for future projects.

78 FR 41852 - Hours of Service for Commercial Motor Vehicle Drivers; Regulatory Guidance Concerning Off-Duty Time

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... made during a work shift as off-duty time? Guidance: Drivers may record meal and other routine stops... Service for Commercial Motor Vehicle Drivers; Regulatory Guidance Concerning Off-Duty Time AGENCY: Federal... motor vehicle (CMV) driver to record meal and other routine stops made during a work shift as off-duty...

The effect of speaking style on a locus equation characterization of stop place of articulation.

PubMed

Sussman, H M; Dalston, E; Gumbert, S

1998-01-01

Locus equations were employed to assess the phonetic stability and distinctiveness of stop place categories in reduced speech. Twenty-two speakers produced stop consonant + vowel utterances in citation and spontaneous speech. Coarticulatory increases in hypoarticulated speech were documented only for /dV/ and [gV] productions in front vowel contexts. Coarticulatory extents for /bV/ and [gV] in back vowel contexts remained stable across style changes. Discriminant analyses showed equivalent levels of correct classification across speaking styles. CV reduction was quantified by use of Euclidean distances separating stop place categories. Despite sensitivity of locus equation parameters to articulatory differences encountered in informal speech, stop place categories still maintained a clear separability when plotted in a higher-order slope x y-intercept acoustic space.

Mapping, Charting and Geodesy Handbook

DTIC Science & Technology

1994-07-15

Air-526 at (703) 604-3380 ext 8102 or 8118 [DSN 664, -.Of a copy of DMAI 8660.10 write DMA, Attn: AMO, Stop D-2, 4600 Sangamore Rd., Bethesda MD 20816 ...Instructions, Lists, and Handbooks from DMA, Attn: AMO, Stop D-2, 4600 Sangamore Rd., Bethesda MD 20816 or call (301) 227-2026 DSN [287] or fax (301) 227...DMA Combat Support Center Attn: CCOR, Stop D-16 6001 MacArthur Blvd. Bethesda, MD 20816 fax (301) 227-2498 DSN 287-2498 3. NOT SO ROUTINE ORDERING

75 FR 12707 - Blueberry Promotion, Research, and Information Order; Increase Membership

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service 7 CFR Part 1218 [Document Number AMS-FV... Service (AMS), U.S. Department of Agriculture, (Department) Room 0632- S, Stop 0244, 1400 Independence..., Research and Promotion Branch, Fruit and Vegetable Programs, AMS, U.S. Department of Agriculture, Stop 0244...

A contest to create media messages aimed at recruiting adolescents for stop smoking programs.

PubMed

Croghan, Ivana T; Campbell, Heather M; Patten, Christi A; Croghan, Gary A; Schroeder, Darrell R; Novotny, Paul J

2004-10-01

This project engaged adolescents in a contest to create advertising messages aimed at recruiting teens for stop smoking programs. Middle school students were invited to design a media message for television, radio, Web, or print (newspaper or billboard). Of 4,289 students in eight middle schools of Rochester, Minn., 265 (6.2%) developed 172 stop smoking messages. The quality of their work confirmed that teens can design media messages to encourage their smoking adolescent peers to enroll in a program to stop smoking.

76 FR 19472 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-07

......... 03/01/11 03/01/11 Inc. (Company). 80015 ACS (State/One-Stop)....... Liberty, KY 03/01/11 02/22/11..., La Junta, CO 03/02/11 02/25/11 Inc. (State/One-Stop). 80018 Cranston Print Works Cranston, RI 03/02...). 80021 Pitney Bowes (State/One- Purchase, NY 03/02/11 03/01/11 Stop). 80022 Sulberg USA (Union...

Using Student Writing and Lexical Analysis to Reveal Student Thinking about the Role of Stop Codons in the Central Dogma

ERIC Educational Resources Information Center

Prevost, Luanna B.; Smith, Michelle K.; Knight, Jennifer K.

2016-01-01

Previous work has shown that students have persistent difficulties in understanding how central dogma processes can be affected by a stop codon mutation. To explore these difficulties, we modified two multiple-choice questions from the Genetics Concept Assessment into three open-ended questions that asked students to write about how a stop codon…

Creating Workforce Development Systems That Work: An Evaluation of the Initial One-Stop Implementation Experience. Final Report.

ERIC Educational Resources Information Center

Kogan, Deborah; Dickinson, Katherine P.; Fedrau, Ruth; Midling, Michael J.; Wolff, Kristin E.

This report analyzes progress states and local sites have made in implementing the One-Stop Career Center systems. An executive summary is followed by Section A, Introduction, which provides an overview of the One-Stop initiative and describes evaluation objectives and methods. The main portion of the report is organized into three major sections.…

The stability of locus equation slopes across stop consonant voicing/aspiration

NASA Astrophysics Data System (ADS)

Sussman, Harvey M.; Modarresi, Golnaz

2004-05-01

The consistency of locus equation slopes as phonetic descriptors of stop place in CV sequences across voiced and voiceless aspirated stops was explored in the speech of five male speakers of American English and two male speakers of Persian. Using traditional locus equation measurement sites for F2 onsets, voiceless labial and coronal stops had significantly lower locus equation slopes relative to their voiced counterparts, whereas velars failed to show voicing differences. When locus equations were derived using F2 onsets for voiced stops that were measured closer to the stop release burst, comparable to the protocol for measuring voiceless aspirated stops, no significant effects of voicing/aspiration on locus equation slopes were observed. This methodological factor, rather than an underlying phonetic-based explanation, provides a reasonable account for the observed flatter locus equation slopes of voiceless labial and coronal stops relative to voiced cognates reported in previous studies [Molis et al., J. Acoust. Soc. Am. 95, 2925 (1994); O. Engstrand and B. Lindblom, PHONUM 4, 101-104]. [Work supported by NIH.

Contamination of the turbine air chamber: a risk of cross infection.

PubMed

Checchi, L; Montebugnoli, L; Samaritani, S

1998-08-01

In the present work, we evaluated (a) the influx of contaminating fluid into the air chamber when a high-speed turbine stops rotating, (b) the significance of a series of variables (type of handpiece and dental unit, shape of the bur, number of stops set on the turbine) which condition it, and (c) the time required to expel the contaminating fluid from the turbine head. Results showed that contamination takes place every time the turbine stops rotating with the bur in contact with an external fluid. The main variable affecting the influx of contaminating fluid into the air chamber of the turbine head was represented by the shape of the bur (F=54.9; p<0.01). Another significant variable was the type of handpiece and dental unit (F=7.3; p<0.01). The number of stops set on the turbine was irrelevant (F=0.03; p=n.s.). The expulsion of the contaminant from the turbine head showed 2 different exponential rates: a very rapid-elimination phase within 30 s and a slow-elimination phase between 60 and 300 s. In order to remove over 99% of the contaminant from the air chamber, a turbine had to run for more than 4-7 min depending on the type of the handpiece. In conclusion, data from the present study suggest that a significant cross-infection potential exists with high-speed handpieces whenever they are only externally scrubbed and disinfected so the internal cleaning and sterilization between patients is mandatory. The practice of flushing by running the turbines between patients should be discouraged.

Employment exit and entry among U.S. adults with and without arthritis during the Great Recession. A longitudinal study: 2007-2009, NHIS/MEPS.

PubMed

Theis, K A; Roblin, D; Helmick, C G; Luo, R

2018-05-28

Negative employment consequences of arthritis are known but not fully understood. Examining transitions in and out of work can provide valuable information. To examine associations of arthritis with employment during the Great Recession and predictors of employment transitions. Data were for 3,277 adults ages 30-62 years with and without arthritis from the 2007 National Health Interview Survey followed in the Medical Expenditure Panel Survey 2008-2009. Employment (working vs. not working) was ascertained at baseline and five follow-ups. We estimated Kaplan Meier survival curves with 95% confidence intervals (CI) separately for time to stopping work (working at baseline) and starting work (not working at baseline) using Cox proportional hazards regression models with hazard ratios (HR). Arthritis was significantly associated with greater risk of stopping work (HR = 1.7, 95% CI = 1.3-2.2; adjusted HR= 1.5, 95% CI = 1.1-2.0) and significantly associated with 40% lower chance of starting work (HR = 0.6, 95% CI = 0.4-0.8); which reversed on adjustment (HR = 1.5, 95% CI = 1.0-2.2). Employment predictors were mixed by outcome. During the Great Recession, adults with arthritis stopped work at higher rates and started work at lower rates than those without arthritis.

Stop feeling: inhibition of emotional interference following stop-signal trials.

PubMed

Kalanthroff, Eyal; Cohen, Noga; Henik, Avishai

2013-01-01

Although a great deal of literature has been dedicated to the mutual links between emotion and the selective attention component of executive control, there is very little data regarding the links between emotion and the inhibitory component of executive control. In the current study we employed an emotional stop-signal task in order to examine whether emotion modulates and is modulated by inhibitory control. Results replicated previous findings showing reduced inhibitory control [longer stop-signal reaction time (SSRT)] following negative, compared to neutral pictures. Most importantly, results show decreased emotional interference following stop-signal trials. These results show that the inhibitory control component of executive control can serve to decrease emotional effects. We suggest that inhibitory control and emotion have a two-way connection in which emotion disrupts inhibitory control and activation of inhibitory control disrupts emotion.

SIG Galileo final converter technical summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinderman, J.D.

1979-05-01

The report is primarily concerned with the work performed for DOE on converter development and fabrication for the NASA Galileo Jupiter mission as a DOE prime contractor with interface primarily with Teledyne Energy Systems. The activities reported on were directed toward design, analysis and testing of modules and converters SN-1 thru SN-7 and attendant Quality Control and Reliability effort. Although assembly and testing of SN-1 was not accomplished due to the stop work order, the design was virtually completed and a significant amount of subcontracting and manufacturing of both module and converter components was underway. These subcontracting and manufacturing activitiesmore » were selectively closed down depending upon degree of completion and material or hardware potential usage in the Technology Program.« less

All-dielectric metamaterial frequency selective surface based on spatial arrangement ceramic resonators

NASA Astrophysics Data System (ADS)

Li, Liyang; Wang, Jun; Feng, Mingde; Ma, Hua; Wang, Jiafu; Du, Hongliang; Qu, Shaobo

In this paper, we demonstrate a method of designing all-dielectric metamaterial frequency selective surface (FSS) with ceramic resonators in spatial arrangement. Compared with the traditional way, spatial arrangement provides a flexible way to handle the permutation and combination of different ceramic resonators. With this method, the resonance response can be adjusted easily to achieve pass/stop band effects. As an example, a stop band spatial arrangement all-dielectric metamaterial FSS is designed. Its working band is in 11.65-12.23GHz. By adjusting permittivity and geometrical parameters of ceramic resonators, we can easily modulate the resonances, band pass or band stop characteristic, as well as the working band.

The cost of murder. Anti-violence groups, hospitals work to try and stop homicides, which have negative impacts on both the community and bottom lines.

PubMed

Carlson, Joe

2009-11-30

The brutal toll of homicide in their communities has some hospitals working with anti-violence groups to halt the slaughter by trying to stop retaliation. Talking to victims after an attack is "really this golden window of opportunity, when they're open to change", says Marla Becker, left, of Youth Alive.

Labor-force participation of older married women.

PubMed

Henretta, J C; O'Rand, A M

1980-08-01

This article utilizes the 1969, 1971, and 1973 waves of the Longitudinal Retirement History Study (LRHS) to examine stopping work by working wives of respondents. Different patterns of labor-force participation reveal that younger wives of respondents were more likely to work than were older wives. Most wives did not reenter the labor force after leaving it. The determinants of stopping or continuing work in 1969-73 for those wives who worked in 1969 were also examined. Although the patterns were somewhat different for younger wives, two factors stand out: Coverage of the wife by a private pension plan and providing for children or elderly parents have substantial effects on the probability of continuing work.

Proceedings User’s Stress Workshop (7th) Held in San Antonio, Texas on December 10-15, 1989: Training for Psychic Trauma

DTIC Science & Technology

1990-12-01

impose additional stresses. For example a. Respect waves of strong emotion. If one occurs while driving, for example, pull over and stop as soon as...else? "Well, this year my father was dying and it was up to me to tell them to pull the plug. So I went to the hospital, and just as I was about to do...34 events, and the present report summarizes our pulling together of this information in order to compare and contrast outcomes. The work presented here was

A unitary convolution approximation for the impact-parameter dependent electronic energy loss

NASA Astrophysics Data System (ADS)

Schiwietz, G.; Grande, P. L.

1999-06-01

In this work, we propose a simple method to calculate the impact-parameter dependence of the electronic energy loss of bare ions for all impact parameters. This perturbative convolution approximation (PCA) is based on first-order perturbation theory, and thus, it is only valid for fast particles with low projectile charges. Using Bloch's stopping-power result and a simple scaling, we get rid of the restriction to low charge states and derive the unitary convolution approximation (UCA). Results of the UCA are then compared with full quantum-mechanical coupled-channel calculations for the impact-parameter dependent electronic energy loss.

Evaluation of bus emissions generated near bus stops

NASA Astrophysics Data System (ADS)

Yu, Qian; Li, Tiezhu

2014-03-01

The purpose of this research is to demonstrate a methodology for quantification of bus emissions generated near bus stops based on the real-world on-road emissions data collected by the Portable Emission Measurement System (PEMS). Data collection was carried out on an urban diesel bus throughout a bus line under normal operation condition on four work days. Stop influence zone is defined as the area in which the normal bus driving is interrupted by bus stops. The second-by-second data were screened out within the stop influence zone. And the bus running state near a stop was classified into three driving modes, deceleration, idling, and acceleration. Then emission characteristics were analyzed for each mode. Under the idling condition, the emission rates (g s-1) were not constant all the time. The NOX emission rate decreased in the first 4-6 s while the corresponding emission rates of CO2, CO, NOX, and HC increased in the last 4 s of idling. Besides, the influence of bus stop characteristics on emissions was investigated using statistical methods. Platform type, length and location of bus stops showed significant effects on the length of the stop influence zone. However, there were no significant effects on distance-based emission factors.

The Influence of End-Stop Buffer Characteristics on the Severity of Suspension Seat End-Stop Impacts

NASA Astrophysics Data System (ADS)

Wu, X.; Griffin, M. J.

1998-08-01

Suspension seat end-stop impacts may be a source of increased risk of injury for the drivers of some machines and work vehicles, such as off-road vehicles. Most suspension seats use rubber buffers to reduce the severity of end-stop impacts, but they still result in a high magnitude of acceleration being transmitted to drivers when an end-stop impact occurs. An experimental study has been conducted to investigate the effect of buffer stiffness and buffer damping on the severity of end-stop impacts. The results show that the end-stop impact performance of suspension seats with only bottom buffers can be improved by the use of both top and bottom buffers. The force-deflection characteristics of rubber buffers had a significant influence on the severity of end-stop impacts. The optimum buffer should have medium stiffness which is nearly linear and occurs over a long deflection, without being compressed to its high stiffness stage. It is shown, theoretically, that buffer damping is capable of significantly reducing the severity of end-stop impacts. However, since current rubber material provides only low damping, alternative materials to those in current use, or either passive or active damping devices, are required.

Inseparability of Go and Stop in Inhibitory Control: Go Stimulus Discriminability Affects Stopping Behavior.

PubMed

Ma, Ning; Yu, Angela J

2016-01-01

Inhibitory control, the ability to stop or modify preplanned actions under changing task conditions, is an important component of cognitive functions. Two lines of models of inhibitory control have previously been proposed for human response in the classical stop-signal task, in which subjects must inhibit a default go response upon presentation of an infrequent stop signal: (1) the race model, which posits two independent go and stop processes that race to determine the behavioral outcome, go or stop; and (2) an optimal decision-making model, which posits that observers decides whether and when to go based on continually (Bayesian) updated information about both the go and stop stimuli. In this work, we probe the relationship between go and stop processing by explicitly manipulating the discrimination difficulty of the go stimulus. While the race model assumes the go and stop processes are independent, and therefore go stimulus discriminability should not affect the stop stimulus processing, we simulate the optimal model to show that it predicts harder go discrimination should result in longer go reaction time (RT), lower stop error rate, as well as faster stop-signal RT. We then present novel behavioral data that validate these model predictions. The results thus favor a fundamentally inseparable account of go and stop processing, in a manner consistent with the optimal model, and contradicting the independence assumption of the race model. More broadly, our findings contribute to the growing evidence that the computations underlying inhibitory control are systematically modulated by cognitive influences in a Bayes-optimal manner, thus opening new avenues for interpreting neural responses underlying inhibitory control.

Medicaid Waivers Targeting Children With Autism Spectrum Disorder Reduce The Need For Parents To Stop Working.

PubMed

Leslie, Douglas L; Iskandarani, Khaled; Velott, Diana L; Stein, Bradley D; Mandell, David S; Agbese, Edeanya; Dick, Andrew W

2017-02-01

Several states have passed Medicaid home and community-based services waivers that expand eligibility criteria and available services for children with autism spectrum disorder. Although previous research has shown considerable variation in these waivers, little is known about the programs' impact on parents' workforce participation. We used nationally representative survey data combined with detailed information on state Medicaid waiver programs to determine the effects of waivers on whether parents of children with autism spectrum disorder had to stop working because of the child's condition. Increases in the Medicaid home and community-based services waiver cost limit and enrollment limit significantly reduced the likelihood that a parent had to stop working, although the results varied considerably by household income level. These findings suggest that the Medicaid waivers are effective policies to address the care-related needs of children with autism spectrum disorder. Project HOPE—The People-to-People Health Foundation, Inc.

Computational prediction of muon stopping sites using ab initio random structure searching (AIRSS)

NASA Astrophysics Data System (ADS)

Liborio, Leandro; Sturniolo, Simone; Jochym, Dominik

2018-04-01

The stopping site of the muon in a muon-spin relaxation experiment is in general unknown. There are some techniques that can be used to guess the muon stopping site, but they often rely on approximations and are not generally applicable to all cases. In this work, we propose a purely theoretical method to predict muon stopping sites in crystalline materials from first principles. The method is based on a combination of ab initio calculations, random structure searching, and machine learning, and it has successfully predicted the MuT and MuBC stopping sites of muonium in Si, diamond, and Ge, as well as the muonium stopping site in LiF, without any recourse to experimental results. The method makes use of Soprano, a Python library developed to aid ab initio computational crystallography, that was publicly released and contains all the software tools necessary to reproduce our analysis.

40 CFR 205.174 - Remedial orders.

Code of Federal Regulations, 2012 CFR

2012-07-01

... not in compliance with the regulations of this subpart. Potential orders are stop sale orders, orders... Noise Emission Test Procedures Appendix I-1 to Subparts D and E—Test Procedure for Street and off-road Motorcycles (a) Instrumentation. Proper usage of all test instrumentation is essential to obtain valid...

40 CFR 205.174 - Remedial orders.

Code of Federal Regulations, 2011 CFR

2011-07-01

... not in compliance with the regulations of this subpart. Potential orders are stop sale orders, orders... Noise Emission Test Procedures Appendix I-1 to Subparts D and E—Test Procedure for Street and off-road Motorcycles (a) Instrumentation. Proper usage of all test instrumentation is essential to obtain valid...

40 CFR 205.174 - Remedial orders.

Code of Federal Regulations, 2013 CFR

2013-07-01

... not in compliance with the regulations of this subpart. Potential orders are stop sale orders, orders... Noise Emission Test Procedures Appendix I-1 to Subparts D and E—Test Procedure for Street and off-road Motorcycles (a) Instrumentation. Proper usage of all test instrumentation is essential to obtain valid...

Light stop mass limits from Higgs rate measurements in the MSSM: Is MSSM electroweak baryogenesis still alive after all?

DOE PAGES

Liebler, Stefan; Profumo, Stefano; Stefaniak, Tim

2016-04-22

We investigate the implications of the Higgs rate measurements from Run 1 of the LHC for the mass of the light scalar top partner (stop) in the Minimal Supersymmetric Standard Model (MSSM). We focus on light stop masses, and we decouple the second, heavy stop and the gluino to the multi-TeV range in order to obtain a Higgs mass of ~125 GeV. We derive lower mass limits for the light stop within various scenarios, taking into account the effects of a possibly light scalar tau partner (stau) or chargino on the Higgs rates, of additional Higgs decays to undetectable “newmore » physics”, as well as of non-decoupling of the heavy Higgs sector. Under conservative assumptions, the stop can be as light as 123 GeV. Relaxing certain theoretical and experimental constraints, such as vacuum stability and model-dependent bounds on sparticle masses from LEP, we find that the light stop mass can be as light as 116 GeV. Lastly, our indirect limits are complementary to direct limits on the light stop mass from collider searches and have important implications for electroweak baryogenesis in the MSSM as a possible explanation for the observed matter-antimatter asymmetry of the Universe.« less

The Care and Feeding of Stop-Outs

ERIC Educational Resources Information Center

Kesselman, Judi R.

1976-01-01

Student practices and administrative problems related to stopping out of college (leaving school to work and/or travel and then returning to complete one's education) are examined on the basis of interviews with stopouts and data from 100 representative 2- and 4-year colleges. (JT)

Massively Parallel Real-Time TDDFT Simulations of Electronic Stopping Processes

NASA Astrophysics Data System (ADS)

Yost, Dillon; Lee, Cheng-Wei; Draeger, Erik; Correa, Alfredo; Schleife, Andre; Kanai, Yosuke

Electronic stopping describes transfer of kinetic energy from fast-moving charged particles to electrons, producing massive electronic excitations in condensed matter. Understanding this phenomenon for ion irradiation has implications in modern technologies, ranging from nuclear reactors, to semiconductor devices for aerospace missions, to proton-based cancer therapy. Recent advances in high-performance computing allow us to achieve an accurate parameter-free description of these phenomena through numerical simulations. Here we discuss results from our recently-developed large-scale real-time TDDFT implementation for electronic stopping processes in important example materials such as metals, semiconductors, liquid water, and DNA. We will illustrate important insight into the physics underlying electronic stopping and we discuss current limitations of our approach both regarding physical and numerical approximations. This work is supported by the DOE through the INCITE awards and by the NSF. Part of this work was performed under the auspices of U.S. DOE by LLNL under Contract DE-AC52-07NA27344.

Evaluation of Effective Factors on Travel Time in Optimization of Bus Stops Placement Using Genetic Algorithm

NASA Astrophysics Data System (ADS)

Bargegol, Iraj; Ghorbanzadeh, Mahyar; Ghasedi, Meisam; Rastbod, Mohammad

2017-10-01

In congested cities, locating and proper designing of bus stops according to the unequal distribution of passengers is crucial issue economically and functionally, since this subject plays an important role in the use of bus system by passengers. Location of bus stops is a complicated subject; by reducing distances between stops, walking time decreases, but the total travel time may increase. In this paper, a specified corridor in the city of Rasht in north of Iran is studied. Firstly, a new formula is presented to calculate the travel time, by which the number of stops and consequently, the travel time can be optimized. An intended corridor with specified number of stops and distances between them is addressed, the related formulas to travel time are created, and its travel time is calculated. Then the corridor is modelled using a meta-heuristic method in order that the placement and the optimal distances of bus stops for that are determined. It was found that alighting and boarding time along with bus capacity are the most effective factors affecting travel time. Consequently, it is better to have more concentration on indicated factors for improving the efficiency of bus system.

78 FR 39429 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Order Granting Approval To Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-01

... public customer, broker-dealer, or any other entity (a ``PIXL Order'') against principal interest or... Auction for simple orders). \\5\\ A Complex Order is defined as ``an order involving the simultaneous... ``Complex Order PAN responses'') and trading interest at a price or prices that improve the stop price to a...

Optical design with Wood lenses

NASA Astrophysics Data System (ADS)

Caldwell, J. Brian

1991-01-01

Spherical aberration in a flat surfaced radial gradient-index lens (a Wood lens) with a parabolic index profile can be corrected by altering the profile to Include higher order terms. However this results in a large amowfl of third order coma. This paper presents an alternative method of aberration correction similar to that used in the catadiopthc Schmidtsystem. A Wood lens with a parabolic profile is used to provide all or most of the optical power. Coma is corrected by stop shifting and Spherical aberration is corrected by placing a powerless Wood lens corrector plate at the stop. 1.

Moloka'i Fieldtrip Guidebook: Selected Aspects of the Geology, Geography, and Coral Reefs of Moloka'i

USGS Publications Warehouse

Cochran, Susan A.; Roberts, Lucile M.; Evans, Kevin R.

2002-01-01

This guidebook was compiled with the express purpose of describing the general geology of Moloka'i and those locations with significance to the U.S. Geological Survey's study of Moloka'i's coral reef, a part of the U.S. Department of Interior's 'Protecting the Nation's Reefs' program. The first portion of the guidebook describes the island and gives the historical background. Fieldtrip stop locations are listed in a logical driving order, essentially from west to east. This order may be changed, or stops deleted, depending on time and scheduling of an individual fieldtrip.

Children's Opinions on Effective Strategies to Cope with Bullying: The Importance of Bullying Role and Perspective

ERIC Educational Resources Information Center

Camodeca, Marina; Goossens, Frits A.

2005-01-01

In order to find out what children would suggest as useful interventions to stop bullying, we designed a questionnaire administered to 311 children (155 boys and 156 girls; mean age=11 years). Thirty-six items were employed to ask children how effective, in their opinion, retaliation, nonchalance and assertiveness could be in stopping bullying.…

Reducing unnecessary urinary catheter use and other strategies to prevent catheter-associated urinary tract infection: an integrative review

PubMed Central

Meddings, Jennifer; Rogers, Mary A M; Krein, Sarah L; Fakih, Mohamad G; Olmsted, Russell N; Saint, Sanjay

2014-01-01

Background Catheter-associated urinary tract infections (CAUTI) are costly, common and often preventable by reducing unnecessary urinary catheter (UC) use. Methods To summarise interventions to reduce UC use and CAUTIs, we updated a prior systematic review (through October 2012), and a meta-analysis regarding interventions prompting UC removal by reminders or stop orders. A narrative review summarises other CAUTI prevention strategies including aseptic insertion, catheter maintenance, antimicrobial UCs, and bladder bundle implementation. Results 30 studies were identified and summarised with interventions to prompt removal of UCs, with potential for inclusion in the meta-analyses. By meta-analysis (11 studies), the rate of CAUTI (episodes per 1000 catheter-days) was reduced by 53% (rate ratio 0.47; 95% CI 0.30 to 0.64, p<0.001) using a reminder or stop order, with five studies also including interventions to decrease initial UC placement. The pooled (nine studies) standardised mean difference (SMD) in catheterisation duration (days) was −1.06 overall (p=0.065) including a statistically significant decrease in stop-order studies (SMD −0.37; p<0.001) but not in reminder studies (SMD, −1.54; p=0.071). No significant harm from catheter removal strategies is supported. Limited research is available regarding the impact of UC insertion and maintenance technique. A recent randomised controlled trial indicates antimicrobial catheters provide no significant benefit in preventing symptomatic CAUTIs. Conclusions UC reminders and stop orders appear to reduce CAUTI rates and should be used to improve patient safety. Several evidence-based guidelines have evaluated CAUTI preventive strategies as well as emerging evidence regarding intervention bundles. Implementation strategies are important because reducing UC use involves changing well-established habits. PMID:24077850

Home - Pest Tracker - CAPS Services

Science.gov Websites

sponsored by the Plant Protection and Quarantine division of USDA Animal and Plant Inspection Services STOP EXOTIC PESTS outreach collection image Plant Native Species Stopping exotic invaders is a working with APHIS Plant Safety and Research staff members removed onionweed from their landscapes. In

Massachusetts One-Stop Career Centers: Job Placement for Disadvantaged Students

ERIC Educational Resources Information Center

Matrundola, Lisa A.

2010-01-01

This study investigated the services provided to students' participating in career preparation programs (e.g., career counseling, mentoring, apprenticeships, work-based learning, or GED programs) provided by the Massachusetts One-Stop Career Centers. A study conducted by the President's Task Force for Disadvantaged Students (2003) found that…

Remote Shutoff Stops Runaway Lawnmower

ERIC Educational Resources Information Center

Grambo, Alan A.

2007-01-01

In this article, the author describes how electronics students at Central Nine Career Center designed a kill switch circuit to stop a runaway lawnmower. This project is ideal for a career center since the electronics/robotics, small engines and horticulture classes can all work together on their respective parts of the modification, installation…

Impact of adalimumab on work participation in rheumatoid arthritis: comparison of an open-label extension study and a registry-based control group.

PubMed

Halpern, M T; Cifaldi, M A; Kvien, T K

2009-06-01

Rheumatoid arthritis (RA) causes considerable disability and often results in loss of work capacity and productivity. This study evaluated the impact of adalimumab, a tumour necrosis factor antagonist with demonstrated efficacy in RA, on long-term employment. Data from an open-label extension study (DE033) of 486 RA patients receiving adalimumab monotherapy who previously did not respond to at least one disease-modifying antirheumatic drug (DMARD) and had baseline work status information were compared with data from 747 RA patients receiving DMARD treatment in a Norway-based longitudinal registry. Primary outcomes included the time patients continued working at least part time and the likelihood of stopping work. Secondary outcomes included American College of Rheumatology (ACR) and European League Against Rheumatism (EULAR) responses and disease remission. Outcomes were compared 6, 12 and 24 months after enrolment. During a 24-month period, the 158 patients who received adalimumab and were working at baseline worked 7.32 months longer (95% CI 4.8 to 9.1) than did the 180 patients treated with DMARDs, controlling for differences in baseline characteristics. Regardless of baseline work status, patients receiving adalimumab worked 2.0 months longer (95% CI 1.3 to 2.6) and were significantly less likely to stop working than those receiving DMARDs (HR 0.36 (95% CI -0.30 to 0.42) for all patients and 0.36 (95% CI 0.15 to 0.85) for patients working at baseline, respectively). The patients who received adalimumab were also considerably more likely to achieve ACR responses and disease remission than DMARD-treated patients. Patients who achieved EULAR good response and remission were less likely to stop working, but this relationship was only seen in patients receiving DMARDs. Patients with RA who received adalimumab experienced considerably longer periods of work and continuous employment, and greater rates of clinical responses, than patients receiving DMARDs. The mechanism by which adalimumab decreases likelihood of stopping work seems to be different from that of DMARD treatment and independent of clinical responses.

A stopping criterion to halt iterations at the Richardson-Lucy deconvolution of radiographic images

NASA Astrophysics Data System (ADS)

Almeida, G. L.; Silvani, M. I.; Souza, E. S.; Lopes, R. T.

2015-07-01

Radiographic images, as any experimentally acquired ones, are affected by spoiling agents which degrade their final quality. The degradation caused by agents of systematic character, can be reduced by some kind of treatment such as an iterative deconvolution. This approach requires two parameters, namely the system resolution and the best number of iterations in order to achieve the best final image. This work proposes a novel procedure to estimate the best number of iterations, which replaces the cumbersome visual inspection by a comparison of numbers. These numbers are deduced from the image histograms, taking into account the global difference G between them for two subsequent iterations. The developed algorithm, including a Richardson-Lucy deconvolution procedure has been embodied into a Fortran program capable to plot the 1st derivative of G as the processing progresses and to stop it automatically when this derivative - within the data dispersion - reaches zero. The radiograph of a specially chosen object acquired with thermal neutrons from the Argonauta research reactor at Institutode Engenharia Nuclear - CNEN, Rio de Janeiro, Brazil, have undergone this treatment with fair results.

Otolith Dysfunction Alters Exploratory Movement in Mice

PubMed Central

Blankenship, Philip A.; Cherep, Lucia A.; Donaldson, Tia N.; Brockman, Sarah N.; Trainer, Alexandria D.; Yoder, Ryan M.; Wallace, Douglas G.

2017-01-01

The organization of rodent exploratory behavior appears to depend on self-movement cue processing. As of yet, however, no studies have directly examined the vestibular system’s contribution to the organization of exploratory movement. The current study sequentially segmented open field behavior into progressions and stops in order to characterize differences in movement organization between control and otoconia-deficient tilted mice under conditions with and without access to visual cues. Under completely dark conditions, tilted mice exhibited similar distance traveled and stop times overall, but had significantly more circuitous progressions, larger changes in heading between progressions, and less stable clustering of home bases, relative to control mice. In light conditions, control and tilted mice were similar on all measures except for the change in heading between progressions. This pattern of results is consistent with otoconia-deficient tilted mice using visual cues to compensate for impaired self-movement cue processing. This work provides the first empirical evidence that signals from the otolithic organs mediate the organization of exploratory behavior, based on a novel assessment of spatial orientation. PMID:28235587

Modeling the effect of bus stops on capacity of curb lane

NASA Astrophysics Data System (ADS)

Luo, Qingyu; Zheng, Tianyao; Wu, Wenjing; Jia, Hongfei; Li, Jin

With the increase of buses and bus lines, a negative effect on road section capacity is made by the prolonged delay and queuing time at bus stops. However, existing methods of measuring the negative effect pay little attention to different bus stop types in the curb lanes. This paper uses Gap theory and Queuing theory to build models for effect-time and potential capacity in different conditions, including curbside bus stops, bus bays with overflow and bus bays without overflow. In order to make the effect-time models accurate and reliable, two types of probabilities are introduced. One is the probability that the dwell time is less than the headway of curb lane at curbside bus stops; the other is the overflow probability at bus bays. Based on the fundamental road capacity model and effect-time models, potential capacity models of curb lane are designed. The new models are calibrated by the survey data from Changchun City, and verified by the simulation software of VISSIM. Furthermore, with different arrival rates of vehicles, the setting conditions of bus stops are researched. Results show that the potential capacity models have high precision. They can offer a reference for recognizing the effect of bus stops on the capacity of curb lane, which can provide a basis for planning, design and management of urban roads and bus stops.

77 FR 33537 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-06

... a ``designated security'' as any NMS stock as defined in Rule 600(b)(47) of SEC Regulation NMS. \\5... that is not an ``NMS stock'' as that term is defined in Rule 600(b)(47) of SEC Regulation NMS; provided... Change Relating to the Handling of Stop and Stop Limit Orders May 31, 2012. Pursuant to Section 19(b)(1...

Association of Subway Driver's Depressive Symptoms and Experience of Work-Related Problems.

PubMed

Jo, Sun-Jin; Yim, Hyeon Woo; Kim, Hyoung-Ryoul; Lee, Kang Sook; Park, Jong-Ik; Chang, Sung Man

2010-12-03

Subway drivers experience various types of work-related problems during their driving, and those experiences can act as risk factors for depressive symptoms. This study was conducted to investigate the association between work-related problems and subway driver's depressive symptoms. We recruited all of the 961 current subway drivers of a subway company located in Seoul, South Korea and conducted a survey of their socio-demographic and vocational characteristics, hospital visits as an outpatient or inpatient, and work-related problem experiences during the last year. Work-related problems included an accident resulting in death or injury, a conflict with a customer, a sudden stop from an emergency bell, or a near accident. Depressive symptoms were measured with the Center for Epidemiologic Studies-Depression (CES-D) instrument. The survey was performed using a self-report questionnaire from April 16 to July 13, 2007. The data of 827 drivers (86.2%) were analyzed. Experience of a conflict with a passenger (p=0.011), a sudden stop from an emergency bell (p=0.001), or a near accident (p=0.001) increased the prevalence of depressive symptoms among subway drivers. A multiple logistic regression analysis revealed that a sudden stop from an emergency bell increased the risk of depressive symptoms significantly (OR=2.59, p=0.026). Near accidents were marginally associated with a higher risk for depressive symptoms (OR=1.62, p=0.062). The experience of a sudden stop from an emergency bell increased subway driver's depressive symptoms, and near accidents may increase the risk of depressive symptoms. Therefore, interventions for the drivers who had experienced these work-related problems are needed.

Why stop self-injuring? Development of the reasons to stop self-injury questionnaire.

PubMed

Turner, Brianna J; Chapman, Alexander L; Gratz, Kim L

2014-01-01

We developed a measure of reasons to refrain from nonsuicidal self-injury (NSSI), the Reasons to Stop Self-Injury Questionnaire (RSSIQ), and examined how such reasons are associated with vulnerability versus resiliency for NSSI. Following qualitative item generation, we explored the factor structure, reliability, and convergent validity of the RSSIQ in 218 self-injuring undergraduates. In Study 2, we confirmed the hierarchical factor structure in 146 self-injuring individuals. In Study 3, we examined the incremental predictive validity of the RSSIQ. These studies resulted in a 40-item inventory with nine subscales and two higher-order factors. Resiliency-related reasons to stop NSSI were associated with greater hopefulness, social support, and adaptive coping, and prospectively protected against NSSI 3 months later, while vulnerability-related reasons were associated with greater psychopathology and dysfunctional coping, and predicted more chronic and severe NSSI. These studies, and the RSSIQ, can enhance the assessment and treatment of NSSI by clarifying motivations to stop NSSI.

Chemical Dosing and First-Order Kinetics

ERIC Educational Resources Information Center

Hladky, Paul W.

2011-01-01

College students encounter a variety of first-order phenomena in their mathematics and science courses. Introductory chemistry textbooks that discuss first-order processes, usually in conjunction with chemical kinetics or radioactive decay, stop at single, discrete dose events. Although single-dose situations are important, multiple-dose events,…

Stop-and-Go Mode: Sensor Manipulation as Essential as Sensor Development in Terrestrial Laser Scanning

PubMed Central

Lin, Yi; Hyyppä, Juha; Kukko, Antero

2013-01-01

This study was dedicated to illustrating the significance of sensor manipulation in the case of terrestrial laser scanning, which is a field now in quick development. In fact, this quickness was mainly rooted in the emergence of new sensors with better performance, while the implications of sensor manipulation have not been fully recognized by the whole community. For this technical gap, the stop-and-go mapping mode can be reckoned as one of the potential solution plans. Stop-and-go was first proposed to handle the low efficiency of traditional static terrestrial laser scanning, and then, it was re-emphasized to improve the stability of sample collections for the state-of-the-art technology of mobile laser scanning. This work reviewed the previous efforts of trying the stop-and-go mode for improving the performance of static and mobile terrestrial laser scanning and generalized their principles respectively. This work also analyzed its advantages compared to the fully-static and fully-kinematic terrestrial laser scanning, and suggested the plans with more automatic measures for raising the efficacy of terrestrial laser scanning. Overall, this literature review indicated that the stop-and-go mapping mode as a case with generic sense can verify the presumption of sensor manipulation as essential as sensor development. PMID:23799493

StopApp: Using the Behaviour Change Wheel to Develop an App to Increase Uptake and Attendance at NHS Stop Smoking Services.

PubMed

Fulton, Emily Anne; Brown, Katherine E; Kwah, Kayleigh L; Wild, Sue

2016-06-08

Smokers who attend NHS Stop Smoking Services (SSS) are four times more likely to stop smoking; however, uptake has been in decline. We report the development of an intervention designed to increase uptake of SSS, from a more motivated self-selected sample of smokers. In Phase 1 we collected data to explore the barriers and facilitators to people using SSS. In Phase 2, data from extant literature and Phase 1 were subject to behavioural analysis, as outlined by the Behaviour Change Wheel (BCW) framework. Relevant Behaviour Change Techniques (BCTs) were identified in order to address these, informing the content of the StopApp intervention. In Phase 3 we assessed the acceptability of the StopApp. Smokers and ex-smokers identified a number of barriers to attending SSS, including a lack of knowledge about what happens at SSS (Capability); the belief that SSS is not easy to access (Opportunity); that there would be 'scare tactics' or 'nagging'; and not knowing anyone who had been and successfully quit (Motivation). The 'StopApp' is in development and will link in with the commissioned SSS booking system. Examples of the content and functionality of the app are outlined. The next phase will involve a full trial to test effectiveness.

Registration for Educator/Teacher Workshops

Science.gov Websites

stop before going to the payment site. Here are your options: School district purchase order: Email your Purchase Order to the registrar. You can also mail or fax it. Check: Mail a check made out to

17 CFR 242.611 - Order protection rule.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) REGULATIONS M, SHO, ATS, AC, AND NMS AND CUSTOMER MARGIN REQUIREMENTS FOR SECURITY FUTURES Regulation Nms... transaction was, for a stopped buy order, lower than the national best bid in the NMS stock at the time of...

Evaluation of undergraduate geologists' problem solving and cognition during field exams using a mixed methods approach

NASA Astrophysics Data System (ADS)

Balliet, Russell N.

Understanding how geologists conduct fieldwork through analysis of problem solving has significant potential impact on field instruction methods. Recent progress has been made in this area but the problem solving behaviors displayed by geologists during fieldwork and the associated underlying cognition remains poorly understood. We present research showing how geology students initiate and develop geologic models as part of the problem solving process. We qualitatively analyzed field notes and interview data from 36 undergraduate geoscientists engaged in field exams while enrolled in a six-week advanced field camp. Eight cognitive frameworks grouped in two broad categories emerged from the data that show how students develop geologic models. Students employ both single and multiple model approaches with varying degrees of success and frequency. The success of any given approach is dependent on the level of students' geologic situational awareness. The development of multiple geologic models leads to a higher rate of success in general, because of the inherent flexibility to accommodate newly collected data. Instructors should continue to teach a multiple model approach until students have the proper geologic skills to ensure a high level of situational awareness and exhibit expert characteristics in the field. In addition, we collected GPS navigation data from students during these field exams in order to understand the relationship between navigation, cognition, and performance. From the analysis of this data we found that over half of all stops are 1-4 minutes long, while very few of students' stops are longer than 9 minutes as the frequency of stops decreases as the duration increases. Regardless of performance or framework, there is an increase in shorter stops and decrease in longer stops from exam one to three, indicating that students changed the way they investigated as the field course progressed. Temporal signatures categorized by performance only show slight differences, but do indicate that there is an increase in very short and longer stops with declining performance. In contrast, higher performance is linked to an increase in short and medium length stops, suggesting that stops 4-14 minutes long are a "sweet spot" for investigation. We speculate that a high percentage of very short stops involve basic field tasks such as locating or data collection and that the decreasing frequency of long stops indicates that there is a relationship between the length of the stop and the complexity of the activities performed during that stop. Students increased experience leads to more efficient stops as they become more competent with field tasks and more versed in the regional geology. The GPS data we collected from these students while they took these notes allowing us to connect the duration of a stop to the types of notes produced during that stop. Note taking species occurred in various frequencies with the most common type being those that focused on lithologic, or lithologic & structural data collection. Stops that produced geologic models, specifically structural models, were much less frequent. The more frequent data collection stops are very short in length (typically 1-4 minutes), while the more complex stops tend to be longer in duration as the note taking gets more complex. Poor performing students had a high proportion of stops where they only collect lithologic data or stops where they don't generate any hypotheses. In contrast, successful students have more structural data and hypothesis generation in their notes. From this analysis we conclude that too much effort spent on stops with only basic data collection leaves less time for the cognitive effort required for model development, eventually leading to poor exam performance. Specifically, a higher frequency of lithologic data stops and lack of structural data leads to the development of incomplete geologic models or lack of comprehensive models altogether. Field instructors often educate their students on good note taking practices and critique the content of their students' field notebooks, and these findings can inform the content of that critique. Students' utilize many different problem solving approaches in the field, but we suggest that instructors continue to advocate a multiple model approach until students are capable of using a single model approach. In this approach students should decrease the number of geologic models they are using as the day progresses to avoid overwhelming themselves with data and hypothesis. Furthermore, field instructors need to work with students on developing their geologic investigation skills further and improving their efficiency. Specifically students need to collect a higher proportion of structural data and develop complete geologic models earlier in the day. (Abstract shortened by UMI.)

20 CFR 663.620 - How do the Welfare-to-Work program and the TANF program relate to the One-Stop delivery system?

Code of Federal Regulations, 2011 CFR

2011-04-01

... TITLE I OF THE WORKFORCE INVESTMENT ACT Priority and Special Populations § 663.620 How do the Welfare-to... improve the quality of services to the WtW and TANF-eligible populations. In addition, becoming a One-Stop...

Identification of Patients with Sleep Disordered Breathing: Comparing the Four-Variable Screening Tool, STOP, STOP-Bang, and Epworth Sleepiness Scales

PubMed Central

Silva, Graciela E.; Vana, Kimberly D.; Goodwin, James L.; Sherrill, Duane L.; Quan, Stuart F.

2011-01-01

Study Objective: The Epworth Sleepiness Scale (ESS) has been used to detect patients with potential sleep disordered breathing (SDB). Recently, a 4-Variable screening tool was proposed to identify patients with SDB, in addition to the STOP and STOP-Bang questionnaires. This study evaluated the abilities of the 4-Variable screening tool, STOP, STOP-Bang, and ESS questionnaires in identifying subjects at risk for SDB. Methods: A total of 4,770 participants who completed polysomnograms in the baseline evaluation of the Sleep Heart Health Study (SHHS) were included. Subjects with RDIs ≥ 15 and ≥ 30 were considered to have moderate-to-severe or severe SDB, respectively. Variables were constructed to approximate those in the questionnaires. The risk of SDB was calculated by the 4-Variable screening tool according to Takegami et al. The STOP and STOP-Bang questionnaires were evaluated including variables for snoring, tiredness/sleepiness, observed apnea, blood pressure, body mass index, age, neck circumference, and gender. Sleepiness was evaluated using the ESS questionnaire and scores were dichotomized into < 11 and ≥ 11. Results: The STOP-Bang questionnaire had higher sensitivity to predict moderate-to-severe (87.0%) and severe (70.4%) SDB, while the 4-Variable screening tool had higher specificity to predict moderate-to-severe and severe SDB (93.2% for both). Conclusions: In community populations such as the SHHS, high specificities may be more useful in excluding low-risk patients, while avoiding false positives. However, sleep clinicians may prefer to use screening tools with high sensitivities, like the STOP-Bang, in order to avoid missing cases that may lead to adverse health consequences and increased healthcare costs. Citation: Silva GE; Vana KD; Goodwin JL; Sherrill DL; Quan SF. Identification of patients with sleep disordered breathing: comparing the Four-Variable screening tool, STOP, STOP-Bang, and Epworth Sleepiness Scales. J Clin Sleep Med 2011;7(5):467-472. PMID:22003341

Top squark with mass close to the top quark

NASA Astrophysics Data System (ADS)

Buckley, Matthew R.; Plehn, Tilman; Ramsey-Musolf, Michael J.

2014-07-01

The most natural supersymmetric solution to the hierarchy problem prefers the scalar top partner to be close in mass to the top quark. Experimental searches exclude top squarks across a wide range of masses, but a gap remains when the difference between the masses of the stop and the lightest supersymmetric particle is close to the top mass. We propose to search for stops in this regime by exploiting the azimuthal angular correlation of forward tagging jets in (s)top pair production. As shown in earlier work, this correlation is sensitive to the spin of the heavy states, allowing one to distinguish between top and stop pair production. Here, we demonstrate that this angular information can give a statistically significant stop pair production signal in the upcoming LHC run. While the appropriate simulation including parton showering and detector simulation requires some care, we find stable predictions for the angular correlation using multijet merging.

SU-G-TeP1-02: Analytical Stopping Power and Range Parameterization for Therapeutic Energy Intervals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donahue, W; Newhauser, W; Mary Bird Perkins Cancer Center, Baton Rouge, LA

Purpose: To develop a simple, analytic parameterization of stopping power and range, which covers a wide energy interval and is applicable to many species of projectile ions and target materials, with less than 15% disagreement in linear stopping power and 1 mm in range. Methods: The new parameterization was required to be analytically integrable from stopping power to range, and continuous across the range interval of 1 µm to 50 cm. The model parameters were determined from stopping power and range data for hydrogen, carbon, iron, and uranium ions incident on water, carbon, aluminum, lead and copper. Stopping power andmore » range data was taken from SRIM. A stochastic minimization algorithm was used to find model parameters, with 10 data points per energy decade. Additionally, fitting was performed with 2 and 26 data points per energy decade to test the model’s robustness to sparse Results: 6 free parameters were sufficient to cover the therapeutic energy range for each projectile ion species (e.g. 1 keV – 300 MeV for protons). The model agrees with stopping power and range data well, with less than 9% relative stopping power difference and 0.5 mm difference in range. As few as, 4 bins per decade were required to achieve comparable fitting results to the full data set. Conclusion: This study successfully demonstrated that a simple analytic function can be used to fit the entire energy interval of therapeutic ion beams of hydrogen and heavier elements. Advantages of this model were the small number (6) of free parameters, and that the model calculates both stopping power and range. Applications of this model include GPU-based dose calculation algorithms and Monte Carlo simulations, where available memory is limited. This work was supported in part by a research agreement between United States Naval Academy and Louisiana State University: Contract No N00189-13-P-0786. In addition, this work was accepted for presentation at the American Nuclear Society Annual Meeting 2016.« less

Comparison of various stopping gases for 3He-based position sensitive neutron detectors

NASA Astrophysics Data System (ADS)

Doumas, A.; Smith, G. C.

2012-05-01

A range of solid state, scintillator and gas based detectors are being developed for use at the next generation of high flux neutron facilities. Since gas detectors are expected to continue to play a key role in future specific thermal neutron experiments, a comparison of the performance characteristics of prospective stopping gases is beneficial. Gas detectors typically utilize the reaction 3He(n,p)t to detect thermal neutrons; the 3He gas is used in a mixture containing a particular stopping gas in order to maintain relatively short ranges for the proton and triton pair emitted from the n-3He reaction. Common stopping gases include hydrocarbons (e.g. propane), carbon tetrafluoride, and noble gases such as argon and xenon. For this study, we utilized the Monte Carlo simulation code "Stopping and Range of Ions in Matter" to analyze the expected behavior of argon, xenon, carbon dioxide, difluoroethane and octafluoropropane as stopping gases for thermal neutron detectors. We also compare these findings to our previously analyzed performance of propane, butane and carbon tetrafluoride. A discussion of these gases includes their behavior in terms of proton and triton range, ionization distribution and straggle.

Pregnancy and work

MedlinePlus

... may need to stop working or reduce your work hours. Most women are advised to only lift things that weigh under 20 pounds (9 kilograms) during pregnancy. Repetitively lifting heavier amounts often causes back injury or disability.

The inherent catastrophic traps in retrograde CTO PCI.

PubMed

Wu, Eugene B; Tsuchikane, Etsuo

2018-05-01

When we learn to drive, our driving instructor tells us how to check the side mirror and turn your head to check the blind spot before changing lanes. He tells us how to stop at stop signs, how to drive in slippery conditions, the safe stopping distances, and these all make our driving safe. Similarly, when we learn PCI, our mentors teach us to seat the guiding catheter co-axially, to wire the vessel safely, to deliver balloon and stents over the wire, to watch the pressure of the guiding, in order that we perform PCI safely and evade complications. In retrograde CTO PCI, there is no such published teaching. Also many individual mentors have not had the wide experience to see all the possible complications of retrograde CTO PCI and, therefore, may not be able to warn their apprentice. As the number of retrograde procedures increase worldwide, there is a corresponding increase in catastrophic complications, many of which, we as experts, can see are easily avoidable. To breach this gap in knowledge, this article describes 12 commonly met inherent traps in retrograde CTO PCI. They are inherent because by arranging our equipment in the manner to perform retrograde CTO PCI, these complications are either induced directly or happen easily. We hope this work will enhance safety of retrograde CTO PCI and avoid many catastrophic complications for our readers and operators. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Small Particulate Contamination Survey Of Genesis Flight Sample 61423

NASA Technical Reports Server (NTRS)

Kuhlman, K. R.; Schmeling, M.; Gonzalez, C. P.; Allums, K. K.; Allton, J. H.; Burnett, D. S.

2016-01-01

The Genesis mission collected solar wind and brought it back to Earth in order to provide precise knowledge of solar isotopic and elemental compositions. The ions in the solar wind stop in the collectors at depths on the order of 10 to a few hundred nanometers. This shallow implantation layer is critical for scientific analysis of the composition of the solar wind and must be preserved throughout sample handling, cleaning, processing, distribution, preparation and analysis. We continue to work with the community of scientists analyzing Genesis samples using our unique laboratory facilities -- and, where needed, our unique cleaning techniques -- to significantly enhance the science return from the Genesis mission. This work is motivated by the need to understand the submicron contamination on the collectors in the Genesis payload as recovered from the crash site in the Utah desert, and -- perhaps more importantly -- how to remove it. We continue to evaluate the effectiveness of the wet-chemical "cleaning" steps used by various investigators, to enable them to design improved methods of stripping spacecraft and terrestrial contamination from surfaces while still leaving the solar-wind signal intact.

Stopping Power for Degenerate Electrons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singleton, Jr., Robert

2016-05-16

This is a first attempt at calculating the BPS stopping power with electron degeneracy corrections. Section I establishes some notation and basic facts. Section II outlines the basics of the calculation, and in Section III contains some brief notes on how to proceed with the details of the calculation. The remaining work for the calculation starts with Section III.

Stop the Pay, Stop the Play

ERIC Educational Resources Information Center

Gardiner, Steve

2014-01-01

While it may seem almost intuitive that offering rewards to students will yield better results, that is not how it works; the result often is the opposite. The paradox of rewards is that their effect often has a limited impact on students, who then will lose curiosity; it also makes them feel as if they are being controlled--a negative motivating…

Non-Stop Lab Week: A Real Laboratory Experience for Life Sciences Postgraduate Courses

ERIC Educational Resources Information Center

Freitas, Maria João; Silva, Joana Vieira; Korrodi-Gregório, Luís; Fardilha, Margarida

2016-01-01

At the Portuguese universities, practical classes of life sciences are usually professor-centered 2-hour classes. This approach results in students underprepared for a real work environment in a research/clinical laboratory. To provide students with a real-life laboratory environment, the Non-Stop Lab Week (NSLW) was created in the Molecular…

Effects of Stopping Ions and LET Fluctuations on Soft Error Rate Prediction.

DOE PAGES

Weeden-Wright, S. L.; King, Michael Patrick; Hooten, N. C.; ...

2015-02-01

Variability in energy deposition from stopping ions and LET fluctuations is quantified for specific radiation environments. When compared to predictions using average LET via CREME96, LET fluctuations lead to an order-of-magnitude difference in effective flux and a nearly 4x decrease in predicted soft error rate (SER) in an example calculation performed on a commercial 65 nm SRAM. The large LET fluctuations reported here will be even greater for the smaller sensitive volumes that are characteristic of highly scaled technologies. End-of-range effects of stopping ions do not lead to significant inaccuracies in radiation environments with low solar activity unless the sensitivevolumemore » thickness is 100 μm or greater. In contrast, end-of-range effects for stopping ions lead to significant inaccuracies for sensitive- volume thicknesses less than 10 μm in radiation environments with high solar activity.« less

Stopping power and range calculations in human tissues by using the Hartree-Fock-Roothaan wave functions

NASA Astrophysics Data System (ADS)

Usta, Metin; Tufan, Mustafa Çağatay

2017-11-01

The object of this work is to present the consequences for the stopping power and range values of some human tissues at energies ranging from 1 MeV to 1 GeV and 1-500 MeV, respectively. The considered human tissues are lung, intestine, skin, larynx, breast, bladder, prostate and ovary. In this work, the stopping power is calculated by considering the number of velocity-dependent effective charge and effective mean excitation energies of the target material. We used the Hartree-Fock-Roothaan (HFR) atomic wave function to determine the charge density and the continuous slowing down approximation (CSDA) method for the calculation of the proton range. Electronic stopping power values of tissues results have been compared with the ICRU 44, 46 reports, SRIM, Janni and CasP data over the percent error rate. Range values relate to tissues have compared the range results with the SRIM, FLUKA and Geant4 data. For electronic stopping power results, ICRU, SRIM and Janni's data indicated the best fit with our values at 1-50, 50-250 MeV and 250 MeV-1 GeV, respectively. For range results, the best accordance with the calculated values have been found the SRIM data and the error level is less than 10% in proton therapy. However, greater 30% errors were observed in the 250 MeV and over energies.

First quantitative measurements of charged-particle stopping and its dependence on electron temperature and density in Inertial-Confinement-Fusion plasmas

NASA Astrophysics Data System (ADS)

Frenje, J.; Li, C. K.; Séguin, F.; Zylstra, A.; Rinderknecht, H.; Petrasso, R.; Delettrez, J.; Glebov, V.; Sangster, T.

2013-10-01

We report on the first quantitative measurements of charged-particle stopping in Inertial-Confinement-Fusion (ICF) plasmas at various conditions. In these experiments, four charged fusion products from the DD and D3He reactions in D3He gas-filled filled implosions were used to determine the stopping power of ICF plasmas at electron temperatures (Te) , ion temperatures (Ti) , and areal densities (ρR) in the range of 0.6-4.0 keV, 3-14 keV and 2-10 mg/cm2, respectively. The resulting data, in the form of measured energy downshift of the charged fusion products, clearly indicate that the stopping-power function depends strongly on Te. It was also observed that the stopping-power function change in characteristics for higher-density implosions in which ions and electrons equilibrate faster, resulting in higher Te relative to Ti and higher ρR s. These results will be modelled by Landau-Spitzer theory and contrasted to different stopping-power models. This work was partially supported by the US DOE, NLUF, LLE, and GA.

Stopping of 200-GeV gold nuclei in nuclear emulsions

NASA Technical Reports Server (NTRS)

Waddington, C.J.; Freier, P. S.; Fixsen, D. J.

1983-01-01

The residual ranges of Au-197(79) nuclei stopping in nuclear emulsions has been measured for nuclei with an incident energy of 991 MeV/amu. The mean ranges observed are appreciably less than those predicted from measurements made on energetic particles of lower charge. However, by the consideration of higher-order correction terms to the rate of energy loss, good agreement can be obtained between the predicted and observed ranges.

Geologic field-trip guide to Long Valley Caldera, California

USGS Publications Warehouse

Hildreth, Wes; Fierstein, Judy

2017-07-26

This guide to the geology of Long Valley Caldera is presented in four parts: (1) An overview of the volcanic geology; (2) a chronological summary of the principal geologic events; (3) a road log with directions and descriptions for 38 field-trip stops; and (4) a summary of the geophysical unrest since 1978 and discussion of its causes. The sequence of stops is arranged as a four-day excursion for the quadrennial General Assembly of the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI), centered in Portland, Oregon, in August 2017. Most stops, however, are written freestanding, with directions that allow each one to be visited independently, in any order selected.

Impaired inhibition and working memory in response to internet-related words among adolescents with internet addiction: A comparison with attention-deficit/hyperactivity disorder.

PubMed

Nie, Jia; Zhang, Wei; Chen, Jia; Li, Wendi

2016-02-28

Impairments in response inhibition and working memory functions have been found to be closely associated with internet addiction (IA) symptoms and attention-deficit/hyperactivity disorder (ADHD) symptoms. In this study, we examined response inhibition and working memory processes with two different materials (internet-related and internet-unrelated stimuli) among adolescents with IA, ADHD and co-morbid IA/ADHD. Twenty-four individuals with IA, 28 individuals with ADHD, 17 individuals with IA/ADHD, and 26 matched normal controls (NC) individuals were recruited. All participants were measured with a Stop-Signal Task and 2-Back Task under the same experimental conditions. In comparison to the NC group, subjects with IA, ADHD and IA/ADHD demonstrated impaired inhibition and working memory. In addition, in comparison to internet-unrelated conditions, IA and co-morbid subjects performed worse on the internet-related condition in the Stop trials during the stop-signal task, and they showed better working memory on the internet-related condition in the 2-Back Task. The findings of our study suggest individuals with IA and IA/ADHD may be impaired in inhibition and working memory functions that might be linked to poor inhibition specifically related to internet-related stimuli, which will advance our understanding of IA and contribute to prevention and intervention strategies. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Cefprozil

MedlinePlus

... is used to treat certain infections caused by bacteria, such as bronchitis (infection of the airway tubes ... antibiotics. It works by stopping the growth of bacteria.Antibiotics such as cefprozil will not work for ...

Tedizolid

MedlinePlus

... treat skin infections caused by certain types of bacteria. Tedizolid is in a class of medications called ... antibiotics. It works by stopping the growth of bacteria.Antibiotics such as tedizolid will not work for ...

Cefuroxime

MedlinePlus

... is used to treat certain infections caused by bacteria, such as bronchitis(infection of the airway tubes ... antibiotics. It works by stopping the growth of bacteria.Antibiotics such as cefuroxime will not work for ...

Erythromycin

MedlinePlus

... is used to treat certain infections caused by bacteria, such as infections of the respiratory tract, including ... antibiotics. It works by stopping the growth of bacteria.Antibiotics such as erythromycin will not work for ...

Cefpodoxime

MedlinePlus

... is used to treat certain infections caused by bacteria such as bronchitis (infection of the airway tubes ... antibiotics. It works by stopping the growth of bacteria.Antibiotics such as cefpodoxime will not work for ...

Cefaclor

MedlinePlus

... is used to treat certain infections caused by bacteria, such as pneumonia and other lower respiratory tract ( ... antibiotics. It works by stopping the growth of bacteria.Antibiotics such as cefaclor will not work for ...

Metronidazole

MedlinePlus

... by too much of certain types of harmful bacteria in the vagina) in women. Metronidazole is in ... antimicrobials. It works by stopping the growth of bacteria.Antibiotics will not work for colds, flu, or ...

Secnidazole

MedlinePlus

... an infection caused by an overgrowth of harmful bacteria in the vagina) in women. Secnidazole is in ... antimicrobials. It works by stopping the growth of bacteria.Antibiotics will not work for colds, flu, or ...

Phase modulation of the bucket stops bunch oscillations at the Fermilab Tevatron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, C.Y.; Burov, A.; /Fermilab

2012-04-02

Bunches in the Tevatron are known to exhibit longitudinal oscillations which persist indefinitely. These oscillations are colloquially called 'dancing bunches.' Although the dancing proton bunches do not cause single bunch emittance growth or beam loss at injection, they lead to bunch lengthening at collisions. In Tevatron operations, a longitudinal damper has been built which stops this dance and damps out coupled bunch modes. Recent theoretical work predicts that the dance can also be stopped by an appropriate change in the bunch distribution. This paper describes the Tevatron experiments which support this theory.

Innovating Data Discovery In NOAA OneStop By Integrating With Social Media

NASA Astrophysics Data System (ADS)

Jakositz, A.; McQuinn, E.; Delk, Z.; Shapiro, J.; Partee, R.; Richerson, E.

2017-12-01

Tasked with improving discovery of and access to NOAA data, the OneStop project has to consider a broad array of data types and end-users in the overall design. While work on the OneStop web interface and backend API is of utmost importance for enabling a variety of users to explore available NOAA data, the challenge of bringing those users to the OneStop portal in the first place remains. In this presentation, we highlight the benefits of using social media - namely YouTube - to attract users to both the data and tools existing in the NOAA realm. Furthermore, we discuss the ways in which varying data types can be discovered from the same portal, triggering different views (for instance, a streaming video), based on maintaining consistent metadata standards.

The IAEA stopping power database, following the trends in stopping power of ions in matter

NASA Astrophysics Data System (ADS)

Montanari, C. C.; Dimitriou, P.

2017-10-01

The aim of this work is to present an overview of the state of art of the energy loss of ions in matter, based on the new developments in the stopping power database of the International Atomic Energy Agency (IAEA). This exhaustive collection of experimental data, graphs, programs and comparisons, is the legacy of Helmut Paul, who made it accessible to the global scientific community, and has been extensively employed in theoretical and experimental research during the last 25 years. The field of stopping power in matter is evolving, with new trends in materials of interest, including oxides, nitrides, polymers, and biological targets. Our goal is to identify areas of interest and emerging data needs to meet the requirements of a continuously developing user community.

Tedizolid Injection

MedlinePlus

... treat skin infections caused by certain types of bacteria. Tedizolid is in a class of medications called ... antibiotics. It works by stopping the growth of bacteria.Antibiotics such as tedizolid injection will not work ...

Chloramphenicol Injection

MedlinePlus

... treat certain types of serious infections caused by bacteria when other antibiotics cannot be used. Chloramphenicol injection ... antibiotics. It works by stopping the growth of bacteria..Antibiotics such as chloramphenicol injection will not work ...

Item hierarchy-based analysis of the Rivermead Mobility Index resulted in improved interpretation and enabled faster scoring in patients undergoing rehabilitation after stroke.

PubMed

Roorda, Leo D; Green, John R; Houwink, Annemieke; Bagley, Pam J; Smith, Jane; Molenaar, Ivo W; Geurts, Alexander C

2012-06-01

To enable improved interpretation of the total score and faster scoring of the Rivermead Mobility Index (RMI) by studying item ordering or hierarchy and formulating start-and-stop rules in patients after stroke. Cohort study. Rehabilitation center in the Netherlands; stroke rehabilitation units and the community in the United Kingdom. Item hierarchy of the RMI was studied in an initial group of patients (n=620; mean age ± SD, 69.2±12.5y; 297 [48%] men; 304 [49%] left hemisphere lesion, and 269 [43%] right hemisphere lesion), and the adequacy of the item hierarchy-based start-and-stop rules was checked in a second group of patients (n=237; mean age ± SD, 60.0±11.3y; 139 [59%] men; 103 [44%] left hemisphere lesion, and 93 [39%] right hemisphere lesion) undergoing rehabilitation after stroke. Not applicable. Mokken scale analysis was used to investigate the fit of the double monotonicity model, indicating hierarchical item ordering. The percentages of patients with a difference between the RMI total score and the scores based on the start-and-stop rules were calculated to check the adequacy of these rules. The RMI had good fit of the double monotonicity model (coefficient H(T)=.87). The interpretation of the total score improved. Item hierarchy-based start-and-stop rules were formulated. The percentages of patients with a difference between the RMI total score and the score based on the recommended start-and-stop rules were 3% and 5%, respectively. Ten of the original 15 items had to be scored after applying the start-and-stop rules. Item hierarchy was established, enabling improved interpretation and faster scoring of the RMI. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Stop Posturing and Start Problem Solving: A Call for Research to Prevent Gun Violence.

PubMed

Hills-Evans, Kelsey; Mitton, Julian; Sacks, Chana A

2018-01-01

Gun violence is a major cause of preventable injury and death in the United States, leading to more than 33,000 deaths each year. However, gun violence prevention is an understudied and underfunded area of research. We review the barriers to research in the field, including restrictions on federal funding. We then outline potential areas in which further research could inform clinical practice, public health efforts, and public policy. We also review examples of innovative collaborations among interdisciplinary teams working to develop strategies to integrate gun violence prevention into patient-doctor interactions in order to interrupt the cycle of gun violence. © 2018 American Medical Association. All Rights Reserved.

Driver performance on approach to crossbuck and STOP sign equipped crossings

DOT National Transportation Integrated Search

2014-07-01

In order to improve safe driving behavior at grade crossings, it is important to understand driver actions at or on approach to those areas. Thus, in order to gain a better understanding of the problem, the Federal Railroad Administration (FRA) Offic...

On the automaticity of response inhibition in individuals with alcoholism.

PubMed

Noël, Xavier; Brevers, Damien; Hanak, Catherine; Kornreich, Charles; Verbanck, Paul; Verbruggen, Frederick

2016-06-01

Response inhibition is usually considered a hallmark of executive control. However, recent work indicates that stop performance can become associatively mediated ('automatic') over practice. This study investigated automatic response inhibition in sober and recently detoxified individuals with alcoholism.. We administered to forty recently detoxified alcoholics and forty healthy participants a modified stop-signal task that consisted of a training phase in which a subset of the stimuli was consistently associated with stopping or going, and a test phase in which this mapping was reversed. In the training phase, stop performance improved for the consistent stop stimuli, compared with control stimuli that were not associated with going or stopping. In the test phase, go performance tended to be impaired for old stop stimuli. Combined, these findings support the automatic inhibition hypothesis. Importantly, performance was similar in both groups, which indicates that automatic inhibitory control develops normally in individuals with alcoholism.. This finding is specific to individuals with alcoholism without other psychiatric disorders, which is rather atypical and prevents generalization. Personalized stimuli with a stronger affective content should be used in future studies. These results advance our understanding of behavioral inhibition in individuals with alcoholism. Furthermore, intact automatic inhibitory control may be an important element of successful cognitive remediation of addictive behaviors.. Copyright © 2016 Elsevier Ltd. All rights reserved.

Electronic stopping powers for heavy ions in SiC and SiO{sub 2}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, K.; Xue, H.; Zhang, Y., E-mail: Zhangy1@ornl.gov

2014-01-28

Accurate information on electronic stopping power is fundamental for broad advances in materials science, electronic industry, space exploration, and sustainable energy technologies. In the case of slow heavy ions in light targets, current codes and models provide significantly inconsistent predictions, among which the Stopping and Range of Ions in Matter (SRIM) code is the most commonly used one. Experimental evidence, however, has demonstrated considerable errors in the predicted ion and damage profiles based on SRIM stopping powers. In this work, electronic stopping powers for Cl, Br, I, and Au ions are experimentally determined in two important functional materials, SiC andmore » SiO{sub 2}, based on a single ion technique, and new electronic stopping power values are derived over the energy regime from 0 to 15 MeV, where large deviations from the SRIM predictions are observed. As an experimental validation, Rutherford backscattering spectrometry (RBS) and secondary ion mass spectrometry (SIMS) are utilized to measure the depth profiles of implanted Au ions in SiC for energies from 700 keV to 15 MeV. The measured ion distributions by both RBS and SIMS are considerably deeper than the SRIM predictions, but agree well with predictions based on our derived stopping powers.« less

Electronic Stopping Powers For Heavy Ions In SiC And SiO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, Ke; Zhang, Y.; Zhu, Zihua

2014-01-24

Accurate information on electronic stopping power is fundamental for broad advances in materials science, electronic industry, space exploration, and sustainable energy technologies. In the case of slow heavy ions in light targets, current codes and models provide significantly inconsistent predictions, among which the Stopping and Range of Ions in Matter (SRIM) code is the most commonly used one. Experimental evidence, however, has demonstrated considerable errors in the predicted ion and damage profiles based on SRIM stopping powers. In this work, electronic stopping powers for Cl, Br, I, and Au ions are experimentally determined in two important functional materials, SiC andmore » SiO2, based on a single ion technique, and new electronic stopping power values are derived over the energy regime from 0 to 15 MeV, where large deviations from the SRIM predictions are observed. As an experimental validation, Rutherford backscattering spectrometry (RBS) and secondary ion mass spectrometry (SIMS) are utilized to measure the depth profiles of implanted Au ions in SiC for energies from 700 keV to 15MeV. The measured ion distributions by both RBS and SIMS are considerably deeper than the SRIM predictions, but agree well with predictions based on our derived stopping powers.« less

Sex work in Tallinn, Estonia: the sociospatial penetration of sex work into society.

PubMed

Aral, S O; St Lawrence, J S; Uusküla, A

2006-10-01

It is important to describe and understand the underlying patterns and dynamics that govern sex work in societies undergoing rapid political and social changes, its heterogeneity across populations, and its evolution through time in order to inform future research, sound policy formation, and programme delivery. To describe the socioeconomic and cultural determinants, organisational structure, distinct categories, and spatial patterning of sex work in Tallinn, Estonia, and identify recent temporal changes in sex work patterns. In-depth interviews with key informants; naturalistic observations of sex work and drug use venues, geo-mapping of sex work sites, review of media, public policy, and commissioned reports, and analyses of existing data. Sex work takes place in a hierarchy of locations in Tallinn ranging from elite brothels and "love flats" to truck stops. These sites vary in terms of their public health importance and social organisation. There are full time, part time, and intermittent male and female sex workers. Among others, the taxi driver, madam and the bartender are central roles in the organisation of sex work in Tallinn. Cell phone and internet technology enable sex work to be highly dispersed and spatially mobile. Future research and programmatic service delivery or outreach efforts should respond to the changing profile of sex work in Tallinn and its implications for STD/HIV epidemiology.

Data Collection with Vehicular-Based Systems - Pole Mountain, WY

DTIC Science & Technology

2012-09-01

demonstration site (Billings et al., 2010) and a second demonstration at Camp Butner ( Pasion et al., 2012). To date, testing of these approaches has...determine dig-list order using the DigZilla tool ( Pasion et al., 2012). The DigZilla analysis used all three polarizabilities. An initial stop-dig point...last TOI recovered on the very last dig. The production team used the automated method of Pasion et al., (2012) for determining the stop-dig point

The effects of 2 landing techniques on knee kinematics, kinetics, and performance during stop-jump and side-cutting tasks.

PubMed

Dai, Boyi; Garrett, William E; Gross, Michael T; Padua, Darin A; Queen, Robin M; Yu, Bing

2015-02-01

Anterior cruciate ligament injuries (ACL) commonly occur during jump landing and cutting tasks. Attempts to land softly and land with greater knee flexion are associated with decreased ACL loading. However, their effects on performance are unclear. Attempts to land softly will decrease peak posterior ground-reaction force (PPGRF) and knee extension moment at PPGRF compared with a natural landing during stop-jump and side-cutting tasks. Attempts to land with greater knee flexion at initial ground contact will increase knee flexion at PPGRF compared with a natural landing during both tasks. In addition, both landing techniques will increase stance time and lower extremity mechanical work as well as decrease jump height and movement speed compared with a natural landing during both tasks. Controlled laboratory study. A total of 18 male and 18 female recreational athletes participated in the study. Three-dimensional kinematic and kinetic data were collected during stop-jump and side-cutting tasks under 3 conditions: natural landing, soft landing, and landing with greater knee flexion at initial ground contact. Attempts to land softly decreased PPGRF and knee extension moment at PPGRF compared with a natural landing during stop-jump tasks. Attempts to land softly decreased PPGRF compared with a natural landing during side-cutting tasks. Attempts to land with greater knee flexion at initial ground contact increased knee flexion angle at PPGRF compared with a natural landing during both stop-jump and side-cutting tasks. Attempts to land softly and land with greater knee flexion at initial ground contact increased stance time and lower extremity mechanical work, as well as decreased jump height and movement speed during both stop-jump and side-cutting tasks. Although landing softly and landing with greater knee flexion at initial ground contact may reduce ACL loading during stop-jump and side-cutting tasks, the performance of these tasks decreased, as indicated by increased stance time and mechanical work as well as decreased jump height and movement speed. Training effects tested in laboratory environments with the focus on reducing ACL loading may be reduced in actual competition environments when the focus is on athlete performance. The effects of training programs for ACL injury prevention on lower extremity biomechanics in athletic tasks may need to be evaluated in laboratories as well as in actual competitions. © 2014 The Author(s).

Integrated Modeling Activities for the James Webb Space Telescope (JWST): Structural-Thermal-Optical Analysis

NASA Technical Reports Server (NTRS)

Johnston, John D.; Parrish, Keith; Howard, Joseph M.; Mosier, Gary E.; McGinnis, Mark; Bluth, Marcel; Kim, Kevin; Ha, Hong Q.

2004-01-01

This is a continuation of a series of papers on modeling activities for JWST. The structural-thermal- optical, often referred to as "STOP", analysis process is used to predict the effect of thermal distortion on optical performance. The benchmark STOP analysis for JWST assesses the effect of an observatory slew on wavefront error. The paper begins an overview of multi-disciplinary engineering analysis, or integrated modeling, which is a critical element of the JWST mission. The STOP analysis process is then described. This process consists of the following steps: thermal analysis, structural analysis, and optical analysis. Temperatures predicted using geometric and thermal math models are mapped to the structural finite element model in order to predict thermally-induced deformations. Motions and deformations at optical surfaces are input to optical models and optical performance is predicted using either an optical ray trace or WFE estimation techniques based on prior ray traces or first order optics. Following the discussion of the analysis process, results based on models representing the design at the time of the System Requirements Review. In addition to baseline performance predictions, sensitivity studies are performed to assess modeling uncertainties. Of particular interest is the sensitivity of optical performance to uncertainties in temperature predictions and variations in metal properties. The paper concludes with a discussion of modeling uncertainty as it pertains to STOP analysis.

Selective forces and mutational biases drive stop codon usage in the human genome: a comparison with sense codon usage.

PubMed

Trotta, Edoardo

2016-05-17

The three stop codons UAA, UAG, and UGA signal the termination of mRNA translation. As a result of a mechanism that is not adequately understood, they are normally used with unequal frequencies. In this work, we showed that selective forces and mutational biases drive stop codon usage in the human genome. We found that, in respect to sense codons, stop codon usage was affected by stronger selective forces but was less influenced by neutral mutational biases. UGA is the most frequent termination codon in human genome. However, UAA was the preferred stop codon in genes with high breadth of expression, high level of expression, AT-rich coding sequences, housekeeping functions, and in gene ontology categories with the largest deviation from expected stop codon usage. Selective forces associated with the breadth and the level of expression favoured AT-rich sequences in the mRNA region including the stop site and its proximal 3'-UTR, but acted with scarce effects on sense codons, generating two regions, upstream and downstream of the stop codon, with strongly different base composition. By favouring low levels of GC-content, selection promoted labile local secondary structures at the stop site and its proximal 3'-UTR. The compositional and structural context favoured by selection was surprisingly emphasized in the class of ribosomal proteins and was consistent with sequence elements that increase the efficiency of translational termination. Stop codons were also heterogeneously distributed among chromosomes by a mechanism that was strongly correlated with the GC-content of coding sequences. In human genome, the nucleotide composition and the thermodynamic stability of stop codon site and its proximal 3'-UTR are correlated with the GC-content of coding sequences and with the breadth and the level of gene expression. In highly expressed genes stop codon usage is compositionally and structurally consistent with highly efficient translation termination signals.

Prosodic Boundaries in Writing: Evidence from a Keystroke Analysis

PubMed Central

Fuchs, Susanne; Krivokapić, Jelena

2016-01-01

The aim of the paper is to investigate duration between successive keystrokes during typing in order to examine whether prosodic boundaries are expressed in the process of writing. In particular, we are interested in interkey durations that occur next to punctuation marks (comma and full stops while taking keystrokes between words as a reference), since these punctuation marks are often realized with minor or major prosodic boundaries during overt reading. A two-part experiment was conducted: first, participants’ keystrokes on a computer keyboard were recorded while writing an email to a close friend (in two conditions: with and without time pressure). Second, participants read the email they just wrote. Interkey durations were compared to pause durations at the same locations during read speech. Results provide evidence of significant differences between interkey durations between words, at commas and at full stops (from shortest to longest). These durations were positively correlated with silent pause durations during overt reading. A more detailed analysis of interkey durations revealed patterns that can be interpreted with respect to prosodic boundaries in speech production, namely as phrase-final and phrase-initial lengthening occurring at punctuation marks. This work provides initial evidence that prosodic boundaries are reflected in the writing process. PMID:27917129

Prosodic Boundaries in Writing: Evidence from a Keystroke Analysis.

PubMed

Fuchs, Susanne; Krivokapić, Jelena

2016-01-01

The aim of the paper is to investigate duration between successive keystrokes during typing in order to examine whether prosodic boundaries are expressed in the process of writing. In particular, we are interested in interkey durations that occur next to punctuation marks (comma and full stops while taking keystrokes between words as a reference), since these punctuation marks are often realized with minor or major prosodic boundaries during overt reading. A two-part experiment was conducted: first, participants' keystrokes on a computer keyboard were recorded while writing an email to a close friend (in two conditions: with and without time pressure). Second, participants read the email they just wrote. Interkey durations were compared to pause durations at the same locations during read speech. Results provide evidence of significant differences between interkey durations between words, at commas and at full stops (from shortest to longest). These durations were positively correlated with silent pause durations during overt reading. A more detailed analysis of interkey durations revealed patterns that can be interpreted with respect to prosodic boundaries in speech production, namely as phrase-final and phrase-initial lengthening occurring at punctuation marks. This work provides initial evidence that prosodic boundaries are reflected in the writing process.

Stopping Criteria for Log-Domain Diffeomorphic Demons Registration: An Experimental Survey for Radiotherapy Application.

PubMed

Peroni, M; Golland, P; Sharp, G C; Baroni, G

2016-02-01

A crucial issue in deformable image registration is achieving a robust registration algorithm at a reasonable computational cost. Given the iterative nature of the optimization procedure an algorithm must automatically detect convergence, and stop the iterative process when most appropriate. This paper ranks the performances of three stopping criteria and six stopping value computation strategies for a Log-Domain Demons Deformable registration method simulating both a coarse and a fine registration. The analyzed stopping criteria are: (a) velocity field update magnitude, (b) mean squared error, and (c) harmonic energy. Each stoping condition is formulated so that the user defines a threshold ∊, which quantifies the residual error that is acceptable for the particular problem and calculation strategy. In this work, we did not aim at assigning a value to e, but to give insights in how to evaluate and to set the threshold on a given exit strategy in a very popular registration scheme. Experiments on phantom and patient data demonstrate that comparing the optimization metric minimum over the most recent three iterations with the minimum over the fourth to sixth most recent iterations can be an appropriate algorithm stopping strategy. The harmonic energy was found to provide best trade-off between robustness and speed of convergence for the analyzed registration method at coarse registration, but was outperformed by mean squared error when all the original pixel information is used. This suggests the need of developing mathematically sound new convergence criteria in which both image and vector field information could be used to detect the actual convergence, which could be especially useful when considering multi-resolution registrations. Further work should be also dedicated to study same strategies performances in other deformable registration methods and body districts. © The Author(s) 2014.

Pregnancy care

MedlinePlus

... have few or mild symptoms during pregnancy. Many women work their full term and travel while they are pregnant. Others may have to cut back on their hours or stop working. Some women require bed rest ...

Use of an electric field in an electrostatic liquid film radiator.

PubMed

Bankoff, S G; Griffing, E M; Schluter, R A

2002-10-01

Experimental and numerical work was performed to further the understanding of an electrostatic liquid film radiator (ELFR) that was originally proposed by Kim et al.(1) The ELFR design utilizes an electric field that exerts a normal force on the interface of a flowing film. The field lowers the pressure under the film in a space radiator and, thereby, prevents leakage through a puncture in the radiator wall. The flowing film is subject to the Taylor cone instability, whereby a cone of fluid forms underneath an electrode and sharpens until a jet of fluid is pulled toward the electrode and disintegrates into droplets. The critical potential for the instability is shown to be as much as an order of magnitude higher than that used in previous designs.(2) Furthermore, leak stoppage experiments indicate that the critical field is adequate to stop leaks in a working radiator.

20 CFR 418.1255 - What kind of major life-changing event evidence will you need to support your request for us to...

Code of Federal Regulations, 2010 CFR

2010-04-01

... stop working or reduce your work hours, we will require evidence documenting the change in work... signed statement under penalty of perjury, describing your work separation or a reduction in hours. (e...

Mood induction effects on motor sequence learning and stop signal reaction time.

PubMed

Greeley, Brian; Seidler, Rachael D

2017-01-01

The neurobiological theory of positive affect proposes that positive mood states may benefit cognitive performance due to an increase of dopamine throughout the brain. However, the results of many positive affect studies are inconsistent; this may be due to individual differences. The relationship between dopamine and performance is not linear, but instead follows an inverted "U" shape. Given this, we hypothesized that individuals with high working memory capacity, a proxy measure for dopaminergic transmission, would not benefit from positive mood induction and in fact performance in dopamine-mediated tasks would decline. In contrast, we predicted that individuals with low working memory capacities would receive the most benefit after positive mood induction. Here, we explored the effect of positive affect on two dopamine-mediated tasks, an explicit serial reaction time sequence learning task and the stop signal task, predicting that an individual's performance is modulated not only by working memory capacity, but also on the type of mood. Improvements in explicit sequence learning from pre- to post-positive mood induction were associated with working memory capacity; performance declined in individuals with higher working memory capacities following positive mood induction, but improved in individuals with lower working memory capacities. This was not the case for negative or neutral mood induction. Moreover, there was no relationship between the change in stop signal reaction time with any of the mood inductions and individual differences in working memory capacity. These results provide partial support for the neurobiological theory of positive affect and highlight the importance of taking into account individual differences in working memory when examining the effects of positive mood induction.

75 FR 13238 - Processed Raspberry Promotion, Research, and Information Order; Delay of Referendum

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-19

... Promotion, Research, and Information Order; Delay of Referendum AGENCY: Agricultural Marketing Service... importers of processed raspberries approve the issuance of the proposed Processed Raspberry Promotion..., Research and Promotion Branch, By, AMS, USDA, Stop 0244, Room 0634-S, 1400 Independence Avenue, SW...

Beliefs of stop smoking practitioners in United Kingdom on the use of nicotine replacement therapy for smoking reduction.

PubMed

Beard, Emma; McDermott, Máirtín; McEwen, Andy; West, Robert

2012-06-01

This paper aimed to assess the current beliefs of stop smoking practitioners and managers about using nicotine replacement therapy (NRT) for smoking reduction (SR) and the factors related to these beliefs. An online survey was conducted of practitioners and managers working in the 152 English stop smoking services (SSSs). Questions were asked about their beliefs concerning the safety of using NRT for SR. Sixteen percent and 30% of the sample, respectively, believed that NRT use for a year or more and the concurrent use of NRT and cigarettes was harmful to health. The most commonly reported potential harms of the long-term use of NRT and the concurrent use of NRT and cigarettes were addiction, overdose and mouth cancer. Seventeen percent of the sample also believed that the use of NRT for SR could hinder smoking cessation. Reports differed as a function of the managers' relationship with their commissioner and influence on the commissioning process, while among practitioners as a function of the number of months worked, gender, frequency of update training and whether they advised reduction as a treatment option. A significant minority of stop smoking practitioners and stop smoking managers believe that NRT use for SR can be harmful to health and undermine smoking cessation. These beliefs should be addressed, especially if the use of NRT in these ways is provided as a route to quitting in SSSs.

Access for All Customers: Universal Strategies for One-Stop Career Centers. The Institute Brief. Issue Number 26

ERIC Educational Resources Information Center

Hoff, David; Varney, Elena; Enein-Donovan, Lara; Thomas, Cindy; Fesko, Sheila

2009-01-01

One-Stop Career Centers serve a diverse range of customers. These include individuals with a variety of educational and work backgrounds, people from diverse racial, linguistic and ethnic cultures, as well as individuals with a wide range of disabilities and support needs. One way of addressing the needs of this diverse customer base is to develop…

Is Tomorrow Another Day? The Labor Supply of New York City Cabdrivers.

ERIC Educational Resources Information Center

Farber, Henry S.

2005-01-01

The labor supply of taxi drivers is consistent with the existence of intertemporal substitution. My analysis of the stopping behavior of New York City cabdrivers shows that daily income effects are small and that the decision to stop work at a particular point on a given day is primarily related to cumulative daily hours to that point. This is in…

Extracting the Electron-Ion Temperature Relaxation Rate from Ion Stopping Experiments

NASA Astrophysics Data System (ADS)

Grabowski, Paul E.; Frenje, Johan A.; Benedict, Lorin X.

2016-10-01

Direct measurement of i-e equilibration rates at ICF-relevant conditions is a big challenge, as it is difficult to differentiate from other sinks and sources of energy, such as heat conduction and pdV work. Another method is to use information from ion stopping experiments. Such experiments at the OMEGA laser have made precision energy loss measurements of fusion products at these conditions. Combined with the multimonochromatic x-ray imager technique, which gives temporally and spatially resolved electron temperature and density, we have a robust stopping experiment. We propose to use such stopping measurements to assess the i-e temperature relaxation rate, since both processes involve energy exchange between electrons and ions. We require that the fusion products are 1) much faster than the thermal ions so that i-i collisions are negligible compared to i-e collisions and 2) slower than the thermal electrons so that the stopping obeys a linear friction law. Then the Coulomb logarithms associated with ion stopping and i-e temperature relaxation rate are identical and a measurement of the former provides the latter. Prepared by LLNL under Contract DE-AC52-07NA27344.

Stopping relativistic Xe, Ho, Au, and U nuclei in nuclear emulsions

NASA Technical Reports Server (NTRS)

Waddington, C. J.; Fixsen, D. J.; Freier, P. S.

1985-01-01

Nuclei of Xe-54, Ho-67, Au-79 and U-92 accelerated at the Bevalac to energies between 1200 and 900 MeV/n were stopped in nuclear emulsions. The observed residual ranges were compared with those calculated from various models of energy loss and shown to be most consistent with a calculation that includes those higher order correction terms proposed previously to describe the energy loss of highly changed particles, for which the first Born approximation is not valid.

Stopping relativistic Xe, Ho, Au and U nuclei in nuclear emulsions

NASA Technical Reports Server (NTRS)

Waddington, C. J.; Fixsen, D. J.; Freier, P. S.

1985-01-01

Nuclei of Xe-54, Ho-67, Au-79 and U-92 accelerated at the Bevalac to energies between 1200 and 900 MeV/n were stopped in nuclear emulsions. The observed residual ranges were compared with those calculated from various models of energy loss and shown to be most consistent with a calculation that includes those higher order correction terms proposed previously to describe the energy loss of highly charged particles, for which the first Born approximation is not valid.

Supersymmetric D-term Twin Higgs

DOE PAGES

Badziak, Marcin; Harigaya, Keisuke

2017-06-01

Here, we propose a new type of supersymmetric Twin Higgs model where the SU(4) invariant quartic term is provided by a D-term potential of a new U(1) gauge symmetry. In the model the 125 GeV Higgs mass can be obtained for stop masses below 1 TeV, and a tuning required to obtain the correct electroweak scale can be as low as 20%. Finally, a stop mass of about 2 TeV is also possible with tuning of order O(10)% .

Structural-Thermal-Optical-Performance (STOP) Analysis

NASA Technical Reports Server (NTRS)

Bolognese, Jeffrey; Irish, Sandra

2015-01-01

The presentation will be given at the 26th Annual Thermal Fluids Analysis Workshop (TFAWS 2015) hosted by the Goddard Spaceflight Center (GSFC) Thermal Engineering Branch (Code 545). A STOP analysis is a multidiscipline analysis, consisting of Structural, Thermal and Optical Performance Analyses, that is performed for all space flight instruments and satellites. This course will explain the different parts of performing this analysis. The student will learn how to effectively interact with each discipline in order to accurately obtain the system analysis results.

Working Less and Enjoying It More: Alternative Work Schedules.

ERIC Educational Resources Information Center

Shanks, Katherine

1984-01-01

Explores three forms of alternative work schedules that research has shown improve job performance and decrease absenteeism: flextime (starting and stopping times vary within limits); permanent part-time employment (regular employment carried out during shorter working hours); and job sharing (two or more part-time employees share one full-time…

Does timing and sequencing of transitions to adulthood make a difference? Stress, smoking, and physical activity among young Australian women.

PubMed

Bell, Sandra; Lee, Christina

2006-01-01

The major changes of the transition to adulthood are argued to be stressful, and health-related behaviors such as smoking and physical activity may be adopted, consolidated, or abandoned at this time. On the other hand, research has suggested that the normative transitions of emerging adulthood, although involving considerable change, may be associated with low stress because they are perceived as both positive and normal at this life stage. This article examines relations between the timing and sequencing of life transitions and stress and health-related behaviors, focusing on the transition to young adulthood among Australian women. A total of 853 women aged 22 to 27 provided information about the timing and sequencing of 6 life transitions: moving out of home, stopping full-time education, starting full-time work, having the first live-in relationship, marriage, and motherhood-and stress, smoking, and physical activity. Most had moved out of home, stopped full-time education, and started full-time work, but only 14% had undertaken all 6 transitions. Overall, 70% of participants had made transitions "in order." Overall, the findings suggest that the relations between timing and sequencing of transitions, and indicators of health, are moderate for smoking, but small for stress and for physical activity. These effects remained after controlling for socioeconomic status of the participants' families of origin. Matching current social norms for the timing and sequencing of life changes may be of less importance for women's well-being than is commonly believed. Although the significant relations between early or "out of order" transitions and smoking are of concern, the smaller relations with stress and with sedentariness suggest that such transitions may have limited negative consequences, and support the view that individuals are active in choosing the life path that is appropriate for them and their circumstances.

Plasma Stopping Power Measurements Relevant to Inertial Confinement Fusion

NASA Astrophysics Data System (ADS)

McEvoy, Aaron; Herrmann, Hans; Kim, Yongho; Hoffman, Nelson; Schmitt, Mark; Rubery, Michael; Garbett, Warren; Horsfield, Colin; Gales, Steve; Zylstra, Alex; Gatu Johnson, Maria; Frenje, Johan; Petrasso, Richard; Marshall, Frederic; Batha, Steve

2015-11-01

Ignition in inertial confinement fusion (ICF) experiments may be achieved if the alpha particle energy deposition results in a thermonuclear burn wave induced in the dense DT fuel layer surrounding the hotspot. As such, understanding the physics of particle energy loss in a plasma is of critical importance to designing ICF experiments. Experiments have validated various stopping power models under select ne and Te conditions, however there remain unexplored regimes where models predict differing rates of energy deposition. An upcoming experiment at the Omega laser facility will explore charged particle stopping in CH plastic capsule ablators across a range of plasma conditions (ne between 1024 cm-3 and 1025 cm-3 and Te on the order of hundreds of eV). Plasma conditions will be measured using x-ray and gamma ray diagnostics, while plasma stopping power will be measured using charged particle energy loss measurements. Details on the experiment and the theoretical models to be tested will be presented.

Development and psychometric properties of the Suicidality: Treatment Occurring in Paediatrics (STOP) Suicidality Assessment Scale (STOP-SAS) in children and adolescents.

PubMed

Flamarique, I; Santosh, P; Zuddas, A; Arango, C; Purper-Ouakil, D; Hoekstra, P J; Coghill, D; Schulze, U; Dittmann, R W; Buitelaar, J K; Lievesley, K; Frongia, R; Llorente, C; Méndez, I; Sala, R; Fiori, F; Castro-Fornieles, J

2016-12-13

To create a self-reported, internet-based questionnaire for the assessment of suicide risk in children and adolescents. As part of the EU project 'Suicidality: Treatment Occurring in Paediatrics' (STOP project), we developed web-based Patient Reported Outcome Measures (PROMs) for children and adolescents and for proxy reports by parents and clinicians in order to assess suicidality. Based on a literature review, expert panels and focus groups of patients, we developed the items of the STOP Suicidality Assessment Scale (STOP-SAS) in Spanish and English, translated it into four more languages, and optimized it for web-based presentation using the HealthTracker TM platform. Of the total 19 questions developed for the STOP-SAS, four questions that assess low-level suicidality were identified as screening questions (three of them for use with children, and all four for use with adolescents, parents and clinicians). A total of 395 adolescents, 110 children, 637 parents and 716 clinicians completed the questionnaire using the HealthTracker TM , allowing us to evaluate the internal consistency and convergent validity of the STOP-SAS with the clinician-rated Columbia Suicide Severity Rating Scale (C-SSRS). Validity was also assessed with the receiver operating characteristic (ROC) area of the STOP-SAS with the C-SSRS. The STOP-SAS comprises 19 items in its adolescent, parent, and clinician versions, and 14 items in its children's version. Good internal consistency was found for adolescents (Cronbach's alpha: 0.965), children (Cronbach's alpha: 0.922), parents (Cronbach's alpha: 0.951) and clinicians (Cronbach's alpha: 0.955) versions. A strong correlation was found between the STOP-SAS and the C-SSRS for adolescents (r:0.670), parents (r:0.548), clinicians (r:0.863) and children (r:0.654). The ROC area was good for clinicians' (0.917), adolescents' (0.834) and parents' (0.756) versions but only fair (0.683) for children's version. The STOP-SAS is a comprehensive, web-based PROM developed on the HealthTracker TM platform, and co-designed for use by adolescents, children, parents and clinicians. It allows the evaluation of aspects of suicidality and shows good reliability and validity.

Methodology for processing pressure traces used as inputs for combustion analyses in diesel engines

NASA Astrophysics Data System (ADS)

Rašić, Davor; Vihar, Rok; Žvar Baškovič, Urban; Katrašnik, Tomaž

2017-05-01

This study proposes a novel methodology for designing an optimum equiripple finite impulse response (FIR) filter for processing in-cylinder pressure traces of a diesel internal combustion engine, which serve as inputs for high-precision combustion analyses. The proposed automated workflow is based on an innovative approach of determining the transition band frequencies and optimum filter order. The methodology is based on discrete Fourier transform analysis, which is the first step to estimate the location of the pass-band and stop-band frequencies. The second step uses short-time Fourier transform analysis to refine the estimated aforementioned frequencies. These pass-band and stop-band frequencies are further used to determine the most appropriate FIR filter order. The most widely used existing methods for estimating the FIR filter order are not effective in suppressing the oscillations in the rate- of-heat-release (ROHR) trace, thus hindering the accuracy of combustion analyses. To address this problem, an innovative method for determining the order of an FIR filter is proposed in this study. This method is based on the minimization of the integral of normalized signal-to-noise differences between the stop-band frequency and the Nyquist frequency. Developed filters were validated using spectral analysis and calculation of the ROHR. The validation results showed that the filters designed using the proposed innovative method were superior compared with those using the existing methods for all analyzed cases. Highlights • Pressure traces of a diesel engine were processed by finite impulse response (FIR) filters with different orders • Transition band frequencies were determined with an innovative method based on discrete Fourier transform and short-time Fourier transform • Spectral analyses showed deficiencies of existing methods in determining the FIR filter order • A new method of determining the FIR filter order for processing pressure traces was proposed • The efficiency of the new method was demonstrated by spectral analyses and calculations of rate-of-heat-release traces

News from Venezuela.

PubMed

2000-01-01

A Venezuelan court has ordered a university to stop requiring HIV testing for admission, while shortly thereafter the Venezuelan Ministry of Health and Social Development authorized obligatory HIV screening of pregnant women.

Inhibitory Control in the Cortico-Basal Ganglia-Thalamocortical Loop: Complex Regulation and Interplay with Memory and Decision Processes.

PubMed

Wei, Wei; Wang, Xiao-Jing

2016-12-07

We developed a circuit model of spiking neurons that includes multiple pathways in the basal ganglia (BG) and is endowed with feedback mechanisms at three levels: cortical microcircuit, corticothalamic loop, and cortico-BG-thalamocortical system. We focused on executive control in a stop signal task, which is known to depend on BG across species. The model reproduces a range of experimental observations and shows that the newly discovered feedback projection from external globus pallidus to striatum is crucial for inhibitory control. Moreover, stopping process is enhanced by the cortico-subcortical reverberatory dynamics underlying persistent activity, establishing interdependence between working memory and inhibitory control. Surprisingly, the stop signal reaction time (SSRT) can be adjusted by weights of certain connections but is insensitive to other connections in this complex circuit, suggesting novel circuit-based intervention for inhibitory control deficits associated with mental illness. Our model provides a unified framework for inhibitory control, decision making, and working memory. Copyright © 2016 Elsevier Inc. All rights reserved.

Accurate atomistic first-principles calculations of electronic stopping

DOE PAGES

Schleife, André; Kanai, Yosuke; Correa, Alfredo A.

2015-01-20

In this paper, we show that atomistic first-principles calculations based on real-time propagation within time-dependent density functional theory are capable of accurately describing electronic stopping of light projectile atoms in metal hosts over a wide range of projectile velocities. In particular, we employ a plane-wave pseudopotential scheme to solve time-dependent Kohn-Sham equations for representative systems of H and He projectiles in crystalline aluminum. This approach to simulate nonadiabatic electron-ion interaction provides an accurate framework that allows for quantitative comparison with experiment without introducing ad hoc parameters such as effective charges, or assumptions about the dielectric function. Finally, our work clearlymore » shows that this atomistic first-principles description of electronic stopping is able to disentangle contributions due to tightly bound semicore electrons and geometric aspects of the stopping geometry (channeling versus off-channeling) in a wide range of projectile velocities.« less

A New Evaluation Method of Stored Heat Effect of Reinforced Concrete Wall of Cold Storage

NASA Astrophysics Data System (ADS)

Nomura, Tomohiro; Murakami, Yuji; Uchikawa, Motoyuki

Today it has become imperative to save energy by operating a refrigerator in a cold storage executed by external insulate reinforced concrete wall intermittently. The theme of the paper is to get the evaluation method to be capable of calculating, numerically, interval time for stopping the refrigerator, in applying reinforced concrete wall as source of stored heat. The experiments with the concrete models were performed in order to examine the time variation of internal temperature after refrigerator stopped. In addition, the simulation method with three dimensional unsteady FEM for personal-computer type was introduced for easily analyzing the internal temperature variation. Using this method, it is possible to obtain the time variation of internal temperature and to calculate the interval time for stopping the refrigerator.

We know how to prescribe natalizumab for multiple sclerosis, but do we know how to withdraw it?

PubMed

Fragoso, Yara D; Arruda, Niedja M; Arruda, Walter O; Brooks, Joseph B B; Correa, Eber C; Damasceno, Alfredo; Damasceno, Carlos A; Ferreira, Maria L B; Giacomo, Maria C B; Gomes, Sidney; Gonçalves, Marcus V M; Grzesiuk, Anderson K; Kaimen-Maciel, Damacio R; Lopes, Josiane; Machado, Suzana C N; Oliveira, Celso L S; Stella, Carla R A V

2014-02-01

Natalizumab is a potent immunosuppressive monoclonal antibody used for the treatment of multiple sclerosis (MS). While definite guidelines for the safety of natalizumab prescriptions are available in all countries, there are no specific recommendations on how to withdraw the drug if the need arises. There are reports describing MS complications after natalizumab infusions were stopped. Most neurologists seem to stop natalizumab treatment according to their idea on how to best carry out the withdrawal. The present study shows the very different manners in which expert neurologists from 14 MS units in Brazil stopped natalizumab in their patients. The authors concluded that pharmacovigilance on natalizumab must persist after the drug is withdrawn in order to have enough data for adequate recommendations.

20 CFR 404.1573 - General information about work activity.

Code of Federal Regulations, 2014 CFR

2014-04-01

... business, this tends to show that you have the ability to work at the substantial gainful activity level... ability to do substantial gainful activity. Also, if you are forced to stop or reduce your work because of..., work done under special conditions may show that you have the necessary skills and ability to work at...

20 CFR 404.1573 - General information about work activity.

Code of Federal Regulations, 2012 CFR

2012-04-01

... business, this tends to show that you have the ability to work at the substantial gainful activity level... ability to do substantial gainful activity. Also, if you are forced to stop or reduce your work because of..., work done under special conditions may show that you have the necessary skills and ability to work at...

20 CFR 404.1573 - General information about work activity.

Code of Federal Regulations, 2013 CFR

2013-04-01

... business, this tends to show that you have the ability to work at the substantial gainful activity level... ability to do substantial gainful activity. Also, if you are forced to stop or reduce your work because of..., work done under special conditions may show that you have the necessary skills and ability to work at...

Significant Issues in Rebuilding the Social Work Profession in China

ERIC Educational Resources Information Center

Shu, Cai

2013-01-01

The author traces the origin of social work to the Confucian concept of Great Unity and social organization of traditional Chinese society. While professional social work started in 1921, its development was interrupted in 1952, but the practice of social work never stopped. Social work was revived as a discipline and profession in 1979 and has…

A heuristic statistical stopping rule for iterative reconstruction in emission tomography.

PubMed

Ben Bouallègue, F; Crouzet, J F; Mariano-Goulart, D

2013-01-01

We propose a statistical stopping criterion for iterative reconstruction in emission tomography based on a heuristic statistical description of the reconstruction process. The method was assessed for MLEM reconstruction. Based on Monte-Carlo numerical simulations and using a perfectly modeled system matrix, our method was compared with classical iterative reconstruction followed by low-pass filtering in terms of Euclidian distance to the exact object, noise, and resolution. The stopping criterion was then evaluated with realistic PET data of a Hoffman brain phantom produced using the GATE platform for different count levels. The numerical experiments showed that compared with the classical method, our technique yielded significant improvement of the noise-resolution tradeoff for a wide range of counting statistics compatible with routine clinical settings. When working with realistic data, the stopping rule allowed a qualitatively and quantitatively efficient determination of the optimal image. Our method appears to give a reliable estimation of the optimal stopping point for iterative reconstruction. It should thus be of practical interest as it produces images with similar or better quality than classical post-filtered iterative reconstruction with a mastered computation time.

29 CFR 530.202 - Piece rates-work measurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... different types of items produced using stop watch time studies or other work measurement methods... Hour Division. (b) The fact that an employer bases piece rates on work measurements which indicate that... 29 Labor 3 2010-07-01 2010-07-01 false Piece rates-work measurement. 530.202 Section 530.202 Labor...

48 CFR 32.704 - Limitation of cost or funds.

Code of Federal Regulations, 2012 CFR

2012-10-01

... fee, if any, based on the percentage of work completed in relation to the total work called for under... of Funds, the contracting officer, upon learning that the contractor is approaching the estimated... contract terms to stop work when the funding or cost limit is reached, and (C) any work beyond the funding...

48 CFR 32.704 - Limitation of cost or funds.

Code of Federal Regulations, 2014 CFR

2014-10-01

... fee, if any, based on the percentage of work completed in relation to the total work called for under... of Funds, the contracting officer, upon learning that the contractor is approaching the estimated... contract terms to stop work when the funding or cost limit is reached, and (C) any work beyond the funding...

48 CFR 32.704 - Limitation of cost or funds.

Code of Federal Regulations, 2011 CFR

2011-10-01

... fee, if any, based on the percentage of work completed in relation to the total work called for under... of Funds, the contracting officer, upon learning that the contractor is approaching the estimated... contract terms to stop work when the funding or cost limit is reached, and (C) any work beyond the funding...

48 CFR 32.704 - Limitation of cost or funds.

Code of Federal Regulations, 2013 CFR

2013-10-01

... fee, if any, based on the percentage of work completed in relation to the total work called for under... of Funds, the contracting officer, upon learning that the contractor is approaching the estimated... contract terms to stop work when the funding or cost limit is reached, and (C) any work beyond the funding...

29 CFR 530.202 - Piece rates-work measurement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Piece rates-work measurement. 530.202 Section 530.202 Labor... Piece rates—work measurement. (a) No certificate will be issued pursuant to § 530.101 of subpart B to an... different types of items produced using stop watch time studies or other work measurement methods...

Spider orb webs rely on radial threads to absorb prey kinetic energy

PubMed Central

Sensenig, Andrew T.; Lorentz, Kimberly A.; Kelly, Sean P.; Blackledge, Todd A.

2012-01-01

The kinetic energy of flying insect prey is a formidable challenge for orb-weaving spiders. These spiders construct two-dimensional, round webs from a combination of stiff, strong radial silk and highly elastic, glue-coated capture spirals. Orb webs must first stop the flight of insect prey and then retain those insects long enough to be subdued by the spiders. Consequently, spider silks rank among the toughest known biomaterials. The large number of silk threads composing a web suggests that aerodynamic dissipation may also play an important role in stopping prey. Here, we quantify energy dissipation in orb webs spun by diverse species of spiders using data derived from high-speed videos of web deformation under prey impact. By integrating video data with material testing of silks, we compare the relative contributions of radial silk, the capture spiral and aerodynamic dissipation. Radial silk dominated energy absorption in all webs, with the potential to account for approximately 100 per cent of the work of stopping prey in larger webs. The most generous estimates for the roles of capture spirals and aerodynamic dissipation show that they rarely contribute more than 30 per cent and 10 per cent of the total work of stopping prey, respectively, and then only for smaller orb webs. The reliance of spider orb webs upon internal energy absorption by radial threads for prey capture suggests that the material properties of the capture spirals are largely unconstrained by the selective pressures of stopping prey and can instead evolve freely in response to alternative functional constraints such as adhering to prey. PMID:22431738

Spider orb webs rely on radial threads to absorb prey kinetic energy.

PubMed

Sensenig, Andrew T; Lorentz, Kimberly A; Kelly, Sean P; Blackledge, Todd A

2012-08-07

The kinetic energy of flying insect prey is a formidable challenge for orb-weaving spiders. These spiders construct two-dimensional, round webs from a combination of stiff, strong radial silk and highly elastic, glue-coated capture spirals. Orb webs must first stop the flight of insect prey and then retain those insects long enough to be subdued by the spiders. Consequently, spider silks rank among the toughest known biomaterials. The large number of silk threads composing a web suggests that aerodynamic dissipation may also play an important role in stopping prey. Here, we quantify energy dissipation in orb webs spun by diverse species of spiders using data derived from high-speed videos of web deformation under prey impact. By integrating video data with material testing of silks, we compare the relative contributions of radial silk, the capture spiral and aerodynamic dissipation. Radial silk dominated energy absorption in all webs, with the potential to account for approximately 100 per cent of the work of stopping prey in larger webs. The most generous estimates for the roles of capture spirals and aerodynamic dissipation show that they rarely contribute more than 30 per cent and 10 per cent of the total work of stopping prey, respectively, and then only for smaller orb webs. The reliance of spider orb webs upon internal energy absorption by radial threads for prey capture suggests that the material properties of the capture spirals are largely unconstrained by the selective pressures of stopping prey and can instead evolve freely in response to alternative functional constraints such as adhering to prey.

Correlated motion in the bulk of dense granular flows.

PubMed

Staron, Lydie

2008-05-01

Numerical simulations of two-dimensional stationary dense granular flows are performed. We check that the system obeys the h_{stop} phenomenology. Focusing on the spatial correlations of the instantaneous velocity fluctuations of the grains, we give evidence of the existence of correlated motion over several grain diameters in the bulk of the flow. Investigating the role of contact friction and restitution, we show that the associated typical length scale lambda is essentially independent of the grain properties. Moreover, we show that lambda is not controlled by the packing compacity. However, in agreement with previous experimental work, we observe that the correlation length decreases with the shear rate. Computing the flows inertia number I , we show a first-order dependence of lambda on I .

Single Event Rates for Devices Sensitive to Particle Energy

NASA Technical Reports Server (NTRS)

Edmonds, L. D.; Scheick, L. Z.; Banker, M. W.

2012-01-01

Single event rates (SER) can include contributions from low-energy particles such that the linear energy transfer (LET) is not constant. Previous work found that the environmental description that is most relevant to the low-energy contribution to the rate is a "stopping rate per unit volume" even when the physical mechanisms for a single-event effect do not require an ion to stop in some device region. Stopping rate tables are presented for four heavy-ion environments that are commonly used to assess device suitability for space applications. A conservative rate estimate utilizing limited test data is derived, and the example of SEGR rate in a power MOSFET is presented.

All Male State-Funded Military Academies: Anachronism or Necessary Anomaly?

ERIC Educational Resources Information Center

Russo, Charles J.; Scollay, Susan J.

1993-01-01

The United States Court of Appeals for the Fourth District, although stopping short of ordering the Virginia Military Institute (VMI) to admit women, ordered VMI to implement a program which comports with the requirements of equal protection. Offers an analysis of the Fourth Circuit's ruling, a discussion of important educational questions, and a…

76 FR 9062 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Disapproving...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-16

... quotation is a better trigger mechanism for stop orders than a transaction, and there may be good reasons... any such reasons. In addition, the Commission believes that, if FINRA rules were to permit members... * * * is not sufficient.'' \\19\\ For the reasons articulated above, the Commission does not believe that...

78 FR 5522 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

... the orderly coordination and implementation of technological and other changes to facilitate... change, at least five business days prior to the date on which FINRA filed the proposed rule change... Effectiveness of Proposed Rule Change To Delay the Implementation Date of FINRA Rule 5350 (Stop Orders) January...

Implications of improved Higgs mass calculations for supersymmetric models.

PubMed

Buchmueller, O; Dolan, M J; Ellis, J; Hahn, T; Heinemeyer, S; Hollik, W; Marrouche, J; Olive, K A; Rzehak, H; de Vries, K J; Weiglein, G

We discuss the allowed parameter spaces of supersymmetric scenarios in light of improved Higgs mass predictions provided by FeynHiggs 2.10.0. The Higgs mass predictions combine Feynman-diagrammatic results with a resummation of leading and subleading logarithmic corrections from the stop/top sector, which yield a significant improvement in the region of large stop masses. Scans in the pMSSM parameter space show that, for given values of the soft supersymmetry-breaking parameters, the new logarithmic contributions beyond the two-loop order implemented in FeynHiggs tend to give larger values of the light CP-even Higgs mass, [Formula: see text], in the region of large stop masses than previous predictions that were based on a fixed-order Feynman-diagrammatic result, though the differences are generally consistent with the previous estimates of theoretical uncertainties. We re-analyse the parameter spaces of the CMSSM, NUHM1 and NUHM2, taking into account also the constraints from CMS and LHCb measurements of [Formula: see text]and ATLAS searches for [Formula: see text] events using 20/fb of LHC data at 8 TeV. Within the CMSSM, the Higgs mass constraint disfavours [Formula: see text], though not in the NUHM1 or NUHM2.

Stopping dynamics of ions passing through correlated honeycomb clusters

NASA Astrophysics Data System (ADS)

Balzer, Karsten; Schlünzen, Niclas; Bonitz, Michael

2016-12-01

A combined nonequilibrium Green functions-Ehrenfest dynamics approach is developed that allows for a time-dependent study of the energy loss of a charged particle penetrating a strongly correlated system at zero and finite temperatures. Numerical results are presented for finite inhomogeneous two-dimensional Fermi-Hubbard models, where the many-electron dynamics in the target are treated fully quantum mechanically and the motion of the projectile is treated classically. The simulations are based on the solution of the two-time Dyson (Keldysh-Kadanoff-Baym) equations using the second-order Born, third-order, and T -matrix approximations of the self-energy. As application, we consider protons and helium nuclei with a kinetic energy between 1 and 500 keV/u passing through planar fragments of the two-dimensional honeycomb lattice and, in particular, examine the influence of electron-electron correlations on the energy exchange between projectile and electron system. We investigate the time dependence of the projectile's kinetic energy (stopping power), the electron density, the double occupancy, and the photoemission spectrum. Finally, we show that, for a suitable choice of the Hubbard model parameters, the results for the stopping power are in fair agreement with ab initio simulations for particle irradiation of single-layer graphene.

A dual but asymmetric role of the dorsal anterior cingulate cortex in response inhibition and switching from a non-salient to salient action

PubMed Central

Manza, Peter; Hu, Sien; Chao, Herta H.; Zhang, Sheng; Leung, Hoi-Chung; Li, Chiang-shan R.

2016-01-01

Response inhibition and salience detection are among the most studied psychological constructs of cognitive control. Despite a growing body of work, how inhibition and salience processing interact and engage regional brain activations remains unclear. Here, we examined this issue in a stop signal task (SST), where a prepotent response needs to be inhibited to allow an alternative, less dominant response. Sixteen adult individuals performed two versions of the SST each with 25% (SST25) and 75% (SST75) of stop trials. We posited that greater regional activations to the infrequent trial type in each condition (i.e., to stop as compared to go trials in SST25 and to go as compared to stop trials in SST75) support salience detection. Further, successful inhibition in stop trials requires attention to the stop signal to trigger motor inhibition, and the stop signal reaction time (SSRT) has been used to index the efficiency of motor response inhibition. Therefore, greater regional activations to stop as compared to go success trials in association with the stop signal reaction time (SSRT) serves to expedite response inhibition. In support of an interactive role, the dorsal anterior cingulate cortex (dACC) increases activation to salience detection in both SST25 and SST75, but only mediates response inhibition in SST75. Thus, infrequency response in the dACC supports motor inhibition only when stopping has become a routine. In contrast, although the evidence is less robust, the pre-supplementary motor area (pre-SMA) increases activity to the infrequent stimulus and supports inhibition in both SST25 and SST75. These findings clarify a unique role of the dACC and add to the literature that distinguishes dACC and pre-SMA functions in cognitive control. PMID:27126003

A dual but asymmetric role of the dorsal anterior cingulate cortex in response inhibition and switching from a non-salient to salient action.

PubMed

Manza, Peter; Hu, Sien; Chao, Herta H; Zhang, Sheng; Leung, Hoi-Chung; Li, Chiang-Shan R

2016-07-01

Response inhibition and salience detection are among the most studied psychological constructs of cognitive control. Despite a growing body of work, how inhibition and salience processing interact and engage regional brain activations remains unclear. Here, we examined this issue in a stop signal task (SST), where a prepotent response needs to be inhibited to allow an alternative, less dominant response. Sixteen adult individuals performed two versions of the SST each with 25% (SST25) and 75% (SST75) of stop trials. We posited that greater regional activations to the infrequent trial type in each condition (i.e., to stop as compared to go trials in SST25 and to go as compared to stop trials in SST75) support salience detection. Further, successful inhibition in stop trials requires attention to the stop signal to trigger motor inhibition, and the stop signal reaction time (SSRT) has been used to index the efficiency of motor response inhibition. Therefore, greater regional activations to stop as compared to go success trials in association with the stop signal reaction time (SSRT) serve to expedite response inhibition. In support of an interactive role, the dorsal anterior cingulate cortex (dACC) increases activation to salience detection in both SST25 and SST75, but only mediates response inhibition in SST75. Thus, infrequency response in the dACC supports motor inhibition only when stopping has become a routine. In contrast, although the evidence is less robust, the pre-supplementary motor area (pre-SMA) increases activity to the infrequent stimulus and supports inhibition in both SST25 and SST75. These findings clarify a unique role of the dACC and add to the literature that distinguishes dACC and pre-SMA functions in cognitive control. Copyright © 2016 Elsevier Inc. All rights reserved.

Conflict anticipation in alcohol dependence - A model-based fMRI study of stop signal task.

PubMed

Hu, Sien; Ide, Jaime S; Zhang, Sheng; Sinha, Rajita; Li, Chiang-Shan R

2015-01-01

Our previous work characterized altered cerebral activations during cognitive control in individuals with alcohol dependence (AD). A hallmark of cognitive control is the ability to anticipate changes and adjust behavior accordingly. Here, we employed a Bayesian model to describe trial-by-trial anticipation of the stop signal and modeled fMRI signals of conflict anticipation in a stop signal task. Our goal is to characterize the neural correlates of conflict anticipation and its relationship to response inhibition and alcohol consumption in AD. Twenty-four AD and 70 age and gender matched healthy control individuals (HC) participated in the study. fMRI data were pre-processed and modeled with SPM8. We modeled fMRI signals at trial onset with individual events parametrically modulated by estimated probability of the stop signal, p(Stop), and compared regional responses to conflict anticipation between AD and HC. To address the link to response inhibition, we regressed whole-brain responses to conflict anticipation against the stop signal reaction time (SSRT). Compared to HC (54/70), fewer AD (11/24) showed a significant sequential effect - a correlation between p(Stop) and RT during go trials - and the magnitude of sequential effect is diminished, suggesting a deficit in proactive control. Parametric analyses showed decreased learning rate and over-estimated prior mean of the stop signal in AD. In fMRI, both HC and AD responded to p(Stop) in bilateral inferior parietal cortex and anterior pre-supplementary motor area, although the magnitude of response increased in AD. In contrast, HC but not AD showed deactivation of the perigenual anterior cingulate cortex (pgACC). Furthermore, deactivation of the pgACC to increasing p(Stop) is positively correlated with the SSRT in HC but not AD. Recent alcohol consumption is correlated with increased activation of the thalamus and cerebellum in AD during conflict anticipation. The current results highlight altered proactive control that may serve as an additional behavioral and neural marker of alcohol dependence.

Sex work in Tallinn, Estonia: the sociospatial penetration of sex work into society

PubMed Central

Aral, S O; Lawrence, J S St; Uusküla, A

2006-01-01

Background It is important to describe and understand the underlying patterns and dynamics that govern sex work in societies undergoing rapid political and social changes, its heterogeneity across populations, and its evolution through time in order to inform future research, sound policy formation, and programme delivery. Objectives To describe the socioeconomic and cultural determinants, organisational structure, distinct categories, and spatial patterning of sex work in Tallinn, Estonia, and identify recent temporal changes in sex work patterns. Methods In‐depth interviews with key informants; naturalistic observations of sex work and drug use venues, geo‐mapping of sex work sites, review of media, public policy, and commissioned reports, and analyses of existing data. Results Sex work takes place in a hierarchy of locations in Tallinn ranging from elite brothels and “love flats” to truck stops. These sites vary in terms of their public health importance and social organisation. There are full time, part time, and intermittent male and female sex workers. Among others, the taxi driver, madam and the bartender are central roles in the organisation of sex work in Tallinn. Cell phone and internet technology enable sex work to be highly dispersed and spatially mobile. Conclusion Future research and programmatic service delivery or outreach efforts should respond to the changing profile of sex work in Tallinn and its implications for STD/HIV epidemiology. PMID:16807288

Neural and behavioral correlates of selective stopping: Evidence for a different strategy adoption.

PubMed

Sánchez-Carmona, Alberto J; Albert, Jacobo; Hinojosa, José A

2016-10-01

The present study examined the neural and behavioral correlates of selective stopping, a form of inhibition that has scarcely been investigated. The selectivity of the inhibitory process is needed when individuals have to deal with an environment filled with multiple stimuli, some of which require inhibition and some of which do not. The stimulus-selective stop-signal task has been used to explore this issue assuming that all participants interrupt their ongoing responses selectively to stop but not to ignore signals. However, recent behavioral evidence suggests that some individuals do not carry out the task as experimenters expect, since they seemed to interrupt their response non-selectively to both signals. In the present study, we detected and controlled the cognitive strategy adopted by participants (n=57) when they performed a stimulus-selective stop-signal task before comparing brain activation between conditions. In order to determine both the onset and the end of the response cancellation process underlying each strategy and to fully take advantage of the precise temporal resolution of event-related potentials, we used a mass univariate approach. Source localization techniques were also employed to estimate the neural underpinnings of the effects observed at the scalp level. Our results from scalp and source level analysis support the behavioral-based strategy classification. Specific effects were observed depending on the strategy adopted by participants. Thus, when contrasting successful stop versus ignore conditions, increased activation was only evident for subjects who were classified as using a strategy whereby the response interruption process was selective to stop trials. This increased activity was observed during the P3 time window in several left-lateralized brain regions, including middle and inferior frontal gyri, as well as parietal and insular cortices. By contrast, in those participants who used a strategy characterized by stopping non-selectively, no activation differences between successful stop and ignore conditions were observed at the estimated time at which response interruption process occurs. Overall, results from the current study highlight the importance of controlling for the different strategies adopted by participants to perform selective stopping tasks before analyzing brain activation patterns. Copyright © 2016 Elsevier Inc. All rights reserved.

STOP Identity Theft Act of 2013

THOMAS, 113th Congress

Sen. Klobuchar, Amy [D-MN

2013-01-24

Senate - 03/06/2014 Placed on Senate Legislative Calendar under General Orders. Calendar No. 316. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A Class of Solvable Stopping Games

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alvarez, Luis H. R.

We consider a class of Dynkin games in the case where the underlying process evolves according to a one-dimensional but otherwise general diffusion. We establish general conditions under which both the value and the saddle point equilibrium exist and under which the exercise boundaries characterizing the saddle point strategy can be explicitly characterized in terms of a pair of standard first order necessary conditions for optimality. We also analyze those cases where an extremal pair of boundaries exists and investigate the overall impact of increased volatility on the equilibrium stopping strategies and their values.

Shielding and Activation Analyses for BTF Facility at SNS

NASA Astrophysics Data System (ADS)

Popova, Irina; Gallmeier, Franz X.

2017-09-01

The beam test facility (BTF), which simulates front end of the Spallation Neutron Source (SNS), has been built at the SNS, and is preparing for commissioning. The BTF has been assembled and will operate in one of service buildings at the site. The 2.5 MeV proton beam, produced in the facility, will be stopped in the beam dump. In order to support BTF project from radiation protection site, neutronics simulations and activation analyses were performed to evaluate the necessary shielding around the facility and radionuclide inventory of the beam stop.

20 CFR 416.991 - If your medical recovery was expected and you returned to work.

Code of Federal Regulations, 2010 CFR

2010-04-01

... SECURITY INCOME FOR THE AGED, BLIND, AND DISABLED Determining Disability and Blindness Continuing Or Stopping Disability Or Blindness § 416.991 If your medical recovery was expected and you returned to work...

Transient tracking of low and high-order eccentricity-related components in induction motors via TFD tools

NASA Astrophysics Data System (ADS)

Climente-Alarcon, V.; Antonino-Daviu, J.; Riera-Guasp, M.; Pons-Llinares, J.; Roger-Folch, J.; Jover-Rodriguez, P.; Arkkio, A.

2011-02-01

The present work is focused on the diagnosis of mixed eccentricity faults in induction motors via the study of currents demanded by the machine. Unlike traditional methods, based on the analysis of stationary currents (Motor Current Signature Analysis (MCSA)), this work provides new findings regarding the diagnosis approach proposed by the authors in recent years, which is mainly focused on the fault diagnosis based on the analysis of transient quantities, such as startup or plug stopping currents (Transient Motor Current Signature Analysis (TMCSA)), using suitable time-frequency decomposition (TFD) tools. The main novelty of this work is to prove the usefulness of tracking the transient evolution of high-order eccentricity-related harmonics in order to diagnose the condition of the machine, complementing the information obtained with the low-order components, whose transient evolution was well characterised in previous works. Tracking of high-order eccentricity-related harmonics during the transient, through their associated patterns in the time-frequency plane, may significantly increase the reliability of the diagnosis, since the set of fault-related patterns arising after application of the corresponding TFD tool is very unlikely to be caused by other faults or phenomena. Although there are different TFD tools which could be suitable for the transient extraction of these harmonics, this paper makes use of a Wigner-Ville distribution (WVD)-based algorithm in order to carry out the time-frequency decomposition of the startup current signal, since this is a tool showing an excellent trade-off between frequency resolution at both high and low frequencies. Several simulation results obtained with a finite element-based model and experimental results show the validity of this fault diagnosis approach under several faulty and operating conditions. Also, additional signals corresponding to the coexistence of the eccentricity and other non-fault related phenomena making difficult the diagnosis (fluctuating load torque) are included in the paper. Finally, a comparison with an alternative TFD tool - the discrete wavelet transform (DWT) - applied in previous papers, is also carried out in the contribution. The results are promising regarding the usefulness of the methodology for the reliable diagnosis of eccentricities and for their discrimination against other phenomena.

Modeling of second order space charge driven coherent sum and difference instabilities

NASA Astrophysics Data System (ADS)

Yuan, Yao-Shuo; Boine-Frankenheim, Oliver; Hofmann, Ingo

2017-10-01

Second order coherent oscillation modes in intense particle beams play an important role for beam stability in linear or circular accelerators. In addition to the well-known second order even envelope modes and their instability, coupled even envelope modes and odd (skew) modes have recently been shown in [Phys. Plasmas 23, 090705 (2016), 10.1063/1.4963851] to lead to parametric instabilities in periodic focusing lattices with sufficiently different tunes. While this work was partly using the usual envelope equations, partly also particle-in-cell (PIC) simulation, we revisit these modes here and show that the complete set of second order even and odd mode phenomena can be obtained in a unifying approach by using a single set of linearized rms moment equations based on "Chernin's equations." This has the advantage that accurate information on growth rates can be obtained and gathered in a "tune diagram." In periodic focusing we retrieve the parametric sum instabilities of coupled even and of odd modes. The stop bands obtained from these equations are compared with results from PIC simulations for waterbag beams and found to show very good agreement. The "tilting instability" obtained in constant focusing confirms the equivalence of this method with the linearized Vlasov-Poisson system evaluated in second order.

Pulling out all the stops: searching for RPV SUSY with stop-jets

NASA Astrophysics Data System (ADS)

Bai, Yang; Katz, Andrey; Tweedie, Brock

2014-01-01

If the lighter stop eigenstate decays directly to two jets via baryonic R-parity violation, it could have escaped existing LHC and Tevatron searches in four-jet events, even for masses as small as 100 GeV. In order to recover sensitivity in the face of increasingly harsh trigger requirements at the LHC, we propose a search for stop pairs in the highly-boosted regime, using the approaches of jet substructure. We demonstrate that the four-jet triggers can be completely bypassed by using inclusive jet- H T triggers, and that the resulting QCD continuum background can be processed by substructure methods into a featureless spectrum suitable for a data-driven bump-hunt down to 100 GeV. We estimate that the LHC 8 TeV run is sensitive to 100 GeV stops with decays of any flavor at better than 5σ-level, and could place exclusions up to 300 GeV or higher. Assuming Minimal Flavor Violation and running a b-tagged analysis, exclusion reach may extend up to nearly 400 GeV. Longer-term, the 14 TeV LHC at 300 fb-1 could extend these mass limits by a factor of two, while continuing to improve sensitivity in the 100 GeV region.

Conflict and inhibition differentially affect the N200/P300 complex in a combined go/nogo and stop-signal task.

PubMed

Enriquez-Geppert, Stefanie; Konrad, Carsten; Pantev, Christo; Huster, René J

2010-06-01

Conflict and inhibition are considered to exert strong influences on the neurophysiological N200 and P300 brain responses as evoked in go/nogo and stop-signal tasks. In order to separate their underlying neural and functional mechanisms, the current experiment manipulated both conflict and inhibition. To do so, the go/nogo and stop-signal tasks were merged into one paradigm. Conflict was manipulated by varying go-trial frequencies across blocks (75% vs. 25%). Motor inhibition was manipulated by using go, nogo and stop trials each representing a different load of inhibition. Event-related potentials (ERPs) as well as current density reconstructions (CDRs) of fifteen healthy participants were analyzed. Overall, infrequent trials evoked significantly more pronounced N200s than frequent trials. The P300 predominantly revealed significant variations between trial types (go, nogo, stop). Estimated source activations of the MCC and the IFC supported the ERP results; N200-related effects were revealed in both regions, whereas the condition-specific variations of the P300 were only observed in the IFC. The results indicate that the N200 primarily reflects conflict-related effects whereas the P300 predominantly represents motor inhibition. Copyright 2010 Elsevier Inc. All rights reserved.

A Controlled Agitation Process for Improving Quality of Canned Green Beans during Agitation Thermal Processing.

PubMed

Singh, Anika; Pratap Singh, Anubhav; Ramaswamy, Hosahalli S

2016-06-01

This work introduces the concept of a controlled agitation thermal process to reduce quality damage in liquid-particulate products during agitation thermal processing. Reciprocating agitation thermal processing (RA-TP) was used as the agitation thermal process. In order to reduce the impact of agitation, a new concept of "stopping agitations after sufficient development of cold-spot temperature" was proposed. Green beans were processed in No. 2 (307×409) cans filled with liquids of various consistency (0% to 2% CMC) at various frequencies (1 to 3 Hz) of RA-TP using a full-factorial design and heat penetration results were collected. Corresponding operator's process time to impart a 10-min process lethality (Fo ) and agitation time (AT) were calculated using heat penetration results. Accordingly, products were processed again by stopping agitations as per 3 agitation regimes, namely; full time agitation, equilibration time agitation, and partial time agitation. Processed products were photographed and tested for visual quality, color, texture, breakage of green beans, turbidity, and percentage of insoluble solids in can liquid. Results showed that stopping agitations after sufficient development of cold-spot temperatures is an effective way of reducing product damages caused by agitation (for example, breakage of beans and its leaching into liquid). Agitations till one-log temperature difference gave best color, texture and visual product quality for low-viscosity liquid-particulate mixture and extended agitations till equilibration time was best for high-viscosity products. Thus, it was shown that a controlled agitation thermal process is more effective in obtaining high product quality as compared to a regular agitation thermal process. © 2016 Institute of Food Technologists®

Zileuton

MedlinePlus

... class of medications called leukotriene synthesis inhibitors. It works by stopping the formation of certain natural substances that cause swelling, tightening, and mucus production in the airways.

A Quartz Crystal Microbalance dew point sensor without frequency measurement.

PubMed

Wang, Guohua; Zhang, Weishuo; Wang, Shuo; Sun, Jinglin

2014-11-01

This work deals with the design of a dew point sensor based on Quartz Crystal Microbalance (QCM) without measuring the frequency. This idea is inspired by the fact that the Colpitts oscillation circuit will stop oscillating when the QCM works in the liquid media. The quartz crystal and the electrode are designed through the finite element simulation and the stop oscillating experiment is conducted to verify the sensibility. Moreover, the measurement result is calibrated to approach the true value. At last a series of dew points at the same temperature is measured with the designed sensor. Results show that the designed dew point sensor is able to detect the dew point with the proper accuracy.

A quartz crystal microbalance dew point sensor without frequency measurement

NASA Astrophysics Data System (ADS)

Wang, Guohua; Zhang, Weishuo; Wang, Shuo; Sun, Jinglin

2014-11-01

This work deals with the design of a dew point sensor based on Quartz Crystal Microbalance (QCM) without measuring the frequency. This idea is inspired by the fact that the Colpitts oscillation circuit will stop oscillating when the QCM works in the liquid media. The quartz crystal and the electrode are designed through the finite element simulation and the stop oscillating experiment is conducted to verify the sensibility. Moreover, the measurement result is calibrated to approach the true value. At last a series of dew points at the same temperature is measured with the designed sensor. Results show that the designed dew point sensor is able to detect the dew point with the proper accuracy.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nusrat, Humza; Pang, Geordi; Ahmad, Syed

Purpose: In radiotherapy, the amount of radiation delivered is determined by optimizing the amount of absorbed dose to the tumor. Dose does not always correlate well with the actual biological effects of radiation. This work seeks to validate the LET-dependence of doped plastic scintillators for use in a radiation beam quality (LET) detector. Methods: The LET spectrum ([Φ]) can be resolved knowing the measured signals of uniquely LET-dependent detectors, [S], and the response of each LET-dependent detector to specific LETs ([R]), through the relation [Φ]=[S][R]{sup −1}. Plastic scintillator response is intrinsically LET dependent and can be varied via doping. Initialmore » prototype consists of plastic scintillator and glass taper coupled to an optical fiber; components are housed in black acrylic, reducing effect of ambient light. In order to determine [R], the light response matrix, GEANT4.10.1 Monte Carlo (MC) was used. To validate MC, measurements were done using high energy electrons (9,12,15MeV) and orthovoltage x-rays (100,250kV); scintillator signal was normalized to dose measured simultaneously. Results: Stopping power was varied by changing particle type/energy; measurements indicated that as stopping power increased from 1.9 to 6.6MeV/cm, detector response increased by 263% (+/−29.2%) for 5%Pb-doped scintillator (155% in MC); 52% (+/−7.8%) increase observed when undoped scintillator was used (49% in MC). 5%Pb-doped discrepancy (100kV x-rays) is being investigated. Conclusions: This work validates that doping effects LET/energy response of scintillators; an effect that can be utilized for construction of an LET detector.« less

Sudden illness while driving a vehicle--a retrospective analysis of commercial drivers in Japan.

PubMed

Hitosugi, Masahito; Gomei, Sayaka; Okubo, Takao; Tokudome, Shogo

2012-01-01

We performed a retrospective analysis of commercial drivers to clarify the background of incidents of sudden illness while driving. The analysis used reports submitted by employers to the Japan Ministry of Land, Infrastructure, Transport, and Tourism regarding commercial drivers who had been ordered to stop driving owing to health problems. Of 211 cases with an average work history of 15.2 years, there were 88 bus drivers, 70 taxi drivers, and 53 truck drivers, 36.0% of who had died as a result of their disease. Among taxi and truck drivers, more than 70% of incidents were due to cardiac, aortic, and cerebrovascular disease. More than 80% of these were unable to avoid traffic accidents caused by sudden illness. However, among bus drivers, cardiac, aortic, and cerebrovascular disease accounted for only 23.5% of incidents, and accidents were avoided in more than half of the cases. The duration between starting work and the incident time was significantly shorter among bus drivers [mean 3.3 hours, standard deviation (SD) 3.1] than taxi (7.7 hours, SD 5.8) and truck (7.2 hours, SD 6.3) drivers (P<0.01). The difference between the sudden illness rates of taxi and truck drivers and those of bus drivers is due to both reporting bias and differences in the awareness needed to prevent disabling events while driving. As a precaution, physicians should advise commercial drivers to stop driving as soon as they detect slight discomfort. To prevent accidents, more assertive health promotion aimed at professional drivers is needed.

Reciprocity in the electronic stopping of slow ions in matter

NASA Astrophysics Data System (ADS)

Sigmund, P.

2008-04-01

The principle of reciprocity, i.e., the invariance of the inelastic excitation in ion-atom collisions against interchange of projectile and target, has been applied to the electronic stopping cross section of low-velocity ions and tested empirically on ion-target combinations supported by a more or less adequate amount of experimental data. Reciprocity is well obeyed (within ~10%) for many systems studied, and deviations exceeding ~20% are exceptional. Systematic deviations such as gas-solid or metal-insulator differences have been looked for but not identified on the present basis. A direct consequence of reciprocity is the equivalence of Z1 with Z2 structure for random slowing down. This feature is reasonably well supported empirically for ion-target combinations involving carbon, nitrogen, aluminium and argon. Reciprocity may be utilized as a criterion to reject questionable experimental data. In cases where a certain stopping cross section has not been or cannot be measured, the stopping cross section for the inverted system may be available and serve as a first estimate. It is suggested to build in reciprocity as a fundamental requirement into empirical interpolation schemes directed at the stopping of low-velocity ions. Examination of the SRIM and MSTAR codes reveals cases where reciprocity is obeyed accurately, but deviations of up to a factor of two are common. In case of heavy ions such as gold, electronic stopping cross sections predicted by SRIM are asserted to be almost an order of magnitude too high.

USABC Development of 12 Volt Battery for Start-Stop Application: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tataria, H.; Gross, O.; Bae, C.

Global automakers are accelerating the development of fuel efficient vehicles, as a part of meeting regional regulatory CO2 emissions requirements. The micro hybrid vehicles with auto start-stop functionality are considered economical solutions for the stringent European regulations. Flooded lead acid batteries were initially considered the most economical solution for idle-stop systems. However, the dynamic charge acceptance (DCA) at lower state-of-charge (SOC) was limiting the life of the batteries. While improved lead-acid batteries with AGM and VRLA features have improved battery longevity, they do not last the life of the vehicle. The United States Advanced Battery Consortium (or USABC, a consortiummore » of GM, Ford, and Chrysler) analyzed energy storage needs for a micro hybrid automobile with start-stop capability, and with a single power source. USABC has analyzed the start-stop behaviors of many drivers and has developed the requirements for the start-stop batteries (Table 3). The testing procedures to validate the performance and longevity were standardized and published. The guideline for the cost estimates calculations have also been provided, in order to determine the value of the newly developed modules. The analysis effort resulted in a set of requirements which will help the battery manufacturers to develop a module to meet the automotive Original Equipment Manufacturers (OEM) micro hybrid vehicle requirements. Battery developers were invited to submit development proposals and two proposals were selected for 50% cost share with USABC/DOE.« less

Stopping and Coulomb explosion of energetic carbon clusters in a plasma irradiated by an intense laser field

NASA Astrophysics Data System (ADS)

Wang, Guiqiu; Wang, Younian

2015-09-01

The interaction of a charged particle beam with a plasma is a very important subject of relevance for many fields of physics, such as inertial confinement fusion (ICF) driven by ion or electron beams, high energy density physics, and related astrophysical problems. Recently, a promising ICF scheme has been proposed, in which the plasma target is irradiated simultaneously by intense laser and ion beams. For molecular ion or cluster, slowing down process will company the Coulomb explosion phenomenon. In this paper, we present a study of the effects of intense radiation field (RF) on the interaction of energetic carbon clusters in a plasma. The emphasis is laid on the dynamic polarization and correlation effects of the constituent ions within the cluster in order to disclose the role of the vicinage effects on the Coulomb explosion and energy deposition of the clusters in plasma. On the other hand, affecting of a strong laser field on the cluster propagating in plasma is considered, the influence of a large range of laser parameters and plasma parameters on the Coulomb explosion and stopping power are discussed. This work is supported by the National Natural Science Foundation of China (11375034), and the Fundamental Research Funds for the Central Universities of China (3132015144, 3132014337).

Range prediction for tissue mixtures based on dual-energy CT

NASA Astrophysics Data System (ADS)

Möhler, Christian; Wohlfahrt, Patrick; Richter, Christian; Greilich, Steffen

2016-06-01

The use of dual-energy CT (DECT) potentially decreases range uncertainties in proton and ion therapy treatment planning via determination of the involved physical target quantities. For eventual clinical application, the correct treatment of tissue mixtures and heterogeneities is an essential feature, as they naturally occur within a patient’s CT. Here, we present how existing methods for DECT-based ion-range prediction can be modified in order to incorporate proper mixing behavior on several structural levels. Our approach is based on the factorization of the stopping-power ratio into the relative electron density and the relative stopping number. The latter is confined for tissue between about 0.95 and 1.02 at a therapeutic beam energy of 200 MeV u-1 and depends on the I-value. We show that convenient mixing and averaging properties arise by relating the relative stopping number to the relative cross section obtained by DECT. From this, a maximum uncertainty of the stopping-power ratio prediction below 1% is suggested for arbitrary mixtures of human body tissues.

Influence of forces acting on side of machine on precision machining of large diameter holes

NASA Astrophysics Data System (ADS)

Fedorenko, M. A.; Bondarenko, J. A.; Sanina, T. M.

2018-03-01

One of the most important factors that increase efficiency, durability and reliability of rotating units is precision installation, preventive maintenance work, timely replacing of a failed or worn components and assemblies. These works should be carried out in the operation of the equipment, as the downtime in many cases leads to large financial losses. Stop of one unit of an industrial enterprise can interrupt the technological chain of production, resulting in a possible stop of the entire equipment. Improving the efficiency and optimization of the repair process increases accuracy of installation work when installing equipment, conducting restoration under operating conditions relevant for enterprises of different industries because it eliminates dismantling the equipment, sending it to maintenance, the expectation of equipment return, the new installation with the required quality and accuracy of repair.

The One-Stop Job Shop.

ERIC Educational Resources Information Center

Kiser, Kim

1998-01-01

Minnesota's WorkForce Centers are a model of state employment services. The centers assist those in need of initiatives such as dislocated worker programs, welfare-to-work services, services for the blind, employment-and-training programs, veterans' services, and job-search assistance. (JOW)

40 CFR 1033.415 - General testing requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... more locomotives for each failing locomotive, but stop testing if the total number of locomotives.... We may order a recall pursuant to 40 CFR part 1068 before testing reaches the tenth locomotive. (c...

'Why can't I just not drink?' A qualitative study of adults' social experiences of stopping or reducing alcohol consumption.

PubMed

Bartram, Ashlea; Eliott, Jaklin; Crabb, Shona

2017-07-01

Alcohol is ingrained in Australian culture, playing an important role in many social occasions. This can make reducing or stopping alcohol consumption challenging, as one risks rejecting, not just a drink but also the valued social norms that drink represents. This study aimed to investigate the social experiences of adults who stop or reduce their alcohol consumption. Sixteen semi-structured interviews were conducted with people aged over 25 years who had stopped or significantly reduced their alcohol consumption for at least 3 months in the past year and were thematically analysed. Participants found themselves stigmatised for violating expectations around alcohol consumption when they tried to stop or reduce their own drinking. Although most were able to either conceal their change in alcohol consumption or present it so that it did not challenge norms around drinking, this approach was seen as a temporary measure and not one to employ with people with whom they socialised regularly. Instead, many participants sought to change their interactions with their social group to focus on activities with which alcohol consumption was not strongly associated. Reducing or stopping alcohol consumption can have positive consequences for health, yet it can also raise social challenges that individuals need to negotiate in order to maintain their social well-being. This tension suggests a need for health promotion campaigns to address the social as well as health consequences of reducing alcohol consumption. [Bartram A, Eliott J, Crabb S. 'Why can't I just not drink?' A qualitative study of adults' social experiences of stopping or reducing alcohol consumption. Drug Alcohol Rev 2017;26:449-455]. © 2016 Australasian Professional Society on Alcohol and other Drugs.

75 FR 47333 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-05

... 100 shares) orders in a separate, dedicated system, but will trade them on the Display Book system... Rule 501(a)--NYSE Amex Equities, the Exchange proposes to amend the definition of the term ``Closing... proposes to add language to conform the definition of a ``Stop Order'' for Nasdaq Securities with that for...

78 FR 1 - Soybean Promotion and Research: Amend the Order To Adjust Representation on the United Soybean Board

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-02

... process. DATES: Effective Date: January 3, 2012. FOR FURTHER INFORMATION CONTACT: Emily DeBord..., Room 2628-S, STOP 0249, 1400 Independence Avenue SW., Washington, DC 20250-0249; Telephone 202/690-2611; Fax 202/720- 1125; or email to Emily[email protected] . SUPPLEMENTARY INFORMATION: Executive Order...

Stopping hormone replacement therapy: were women ill advised?

PubMed

Cumming, Grant P; Currie, Heather D; Panay, Nick; Moncur, Rik; Lee, Amanda J

2011-09-01

To survey women who stopped hormone replacement therapy (HRT) after 2002, including those who later restarted. A questionnaire on the UK-based menopause website www.menopausematters.co.uk evaluating how women are influenced by HRT advice. Main outcome measures Answers to questions regarding stopping/restarting HRT in response to the advice in the early 2000s and advice given today. A total of 1100 responses were obtained. Of those who made the decision to stop HRT themselves, 56.4% (n = 425/754) said that they were influenced by the media. In those who would potentially most benefit from HRT, 72.8% (n = 220/302) stopped without medical advice. Overall, women aged under 50 years were significantly more likely to stop HRT themselves than women over 50 (P < 0.001). In women in whom symptoms returned, 37.5% (n = 362/966) said these affected their ability to work, 45.1% (n = 436) had problems with decision-making, 53.6% (n = 518) admitted to relationships being negatively affected and 29.2% (n = 286) said that symptoms affected their social relationships. Overall 46.5% of women (n = 485/1044) would not have stopped HRT given the current understanding of risk. Compared with women over 50, significantly more women under the age of 50 said that they would not have previously stopped their HRT based on their current understanding of risk (P < 0.001). The negative impact of published research and its reporting from the early 2000s are being mitigated by current press coverage. Media reports appear to influence the younger woman more than the older woman. Health professionals and media must learn the lessons from the past.

Three-dimensional Bragg diffraction in growth-disordered opals

NASA Astrophysics Data System (ADS)

Baryshev, A. V.; Kaplyanskii, Alexander A.; Kosobukin, Vladimir A.; Limonov, M. F.; Samusev, K. B.; Usvyat, D. E.

2003-06-01

After artificial opals as well as opal-based infilled and inverted composites are considered to be promising representatives of photonic crystal materials. Earlier, photonic stop gaps in opals were studied mainly in transmission or specular reflection geometries corresponding to "one-dimensional" Bragg diffraction. On the contrary, this work was aimed at observing the typical patterns of optical Bragg diffraction in which phenomenon opal crystal structure acts as a three-dimensional diffraction grating. Although our experiments were performed for artificial opals possessing unavoidable imperfections a well-pronounced diffraction peaks were observed characteristic of a crystal structure. Each of the diffraction maxima reveals a photonic stop gap in the specified direction, while the spectral width of the peak is a measure of the photonic stop gap width.

Comparison of Stopping Power and Range Databases for Radiation Transport Study

NASA Technical Reports Server (NTRS)

Tai, H.; Bichsel, Hans; Wilson, John W.; Shinn, Judy L.; Cucinotta, Francis A.; Badavi, Francis F.

1997-01-01

The codes used to calculate stopping power and range for the space radiation shielding program at the Langley Research Center are based on the work of Ziegler but with modifications. As more experience is gained from experiments at heavy ion accelerators, prudence dictates a reevaluation of the current databases. Numerical values of stopping power and range calculated from four different codes currently in use are presented for selected ions and materials in the energy domain suitable for space radiation transport. This study of radiation transport has found that for most collision systems and for intermediate particle energies, agreement is less than 1 percent, in general, among all the codes. However, greater discrepancies are seen for heavy systems, especially at low particle energies.

Measurement of charged-particle stopping in warm-dense plasma

DOE PAGES

Zylstra, A.  B.; Frenje, J.  A.; Grabowski, P. E.; ...

2015-05-27

We measured the stopping of energetic protons in an isochorically-heated solid-density Be plasma with an electron temperature of ~32 eV, corresponding to moderately-coupled [(e²/a/(k BT e + E F ) ~ 0.3] and moderately-degenerate [k BT e/E F ~2] 'warm dense matter' (WDM) conditions. We present the first high-accuracy measurements of charged-particle energy loss through dense plasma, which shows an increased loss relative to cold matter, consistent with a reduced mean ionization potential. The data agree with stopping models based on an ad-hoc treatment of free and bound electrons, as well as the average-atom local-density approximation; this work is themore » first test of these theories in WDM plasma.« less

[The effect of self-determination on time perspective and child-care anxiety].

PubMed

Miyamoto, Junko

2013-06-01

This study examines the effect of self-determination on time perspectives and child-care anxiety from a viewpoint of life course. A total of 1,726 mothers with small children participated in a questionnaire survey. They were classified into four groups based on their planned life courses: mothers who work; mothers who stopped working, but plan on returning to work; mothers who don't want to work and plan to stay at home; and mothers who stopped working, but plan on returning to work when their children grow up. Child-care anxiety was classified into four categories: (a) sense of stagnation and sacrifice, (b) fatigue, (c) diffidence, (d) feeling disaffection. The results show that fulfillment associated with child-care anxiety exists for all groups and factors of child-care anxiety, and that fulfillment was influenced by differences between self-determination and self-determination desires. The effect of self-determination on time perspectives and child-care anxiety differed between groups. It is suggested that society should provide different support to mothers with small children and child-care anxiety related to their different planned life courses.

Arousal, working memory capacity, and sexual decision-making in men.

PubMed

Spokes, Tara; Hine, Donald W; Marks, Anthony D G; Quain, Peter; Lykins, Amy D

2014-08-01

This study investigated whether working memory capacity (WMC) moderated the relationship between physiological arousal and sexual decision making. A total of 59 men viewed 20 consensual and 20 non-consensual images of heterosexual interaction while their physiological arousal levels were recorded using skin conductance response. Participants also completed an assessment of WMC and a date-rape analogue task for which they had to identify the point at which an average Australian male would cease all sexual advances in response to verbal and/or physical resistance from a female partner. Participants who were more physiologically aroused by and spent more time viewing the non-consensual sexual imagery nominated significantly later stopping points on the date-rape analogue task. Consistent with our predictions, the relationship between physiological arousal and nominated stopping point was strongest for participants with lower levels of WMC. For participants with high WMC, physiological arousal was unrelated to nominated stopping point. Thus, executive functioning ability (and WMC in particular) appears to play an important role in moderating men's decision making with regard to sexually aggressive behavior.

Muon reactivation in muon-catalyzed D-T fusion

NASA Astrophysics Data System (ADS)

Rafelski, H. E.; Müller, B.; Rafelski, J.; Trautmann, D.; Viollier, R. D.

We comprehensively reanalyze and search for the density dependence of the effective muon alpha sticking fraction ωsff observed experimentally in muon catalyzed deuterium-tritium fusion. In our work particular emphasis has been put on the density dependent dense hydrogen stopping power. The main technical details and improvements in this work are: The (αμ) + 2s and 2p states are treated independently and are assigned individual reaction rates. The essential muonic excitation rates have been recalculated taking into account finite nuclear mass effects. The stopping power for a charged projectile in liquid heavy hydrogen is modified to account for dynamic screening effects and a density dependent effective ionization potential. It is shown that the medium dependent stopping power for the (αμ) + ion is the crucial factor controlling the density dependence of the effective sticking fraction. It is also pointed out that the muonic helium K α X-ray yield and the sticking fraction at high density can not be simultaneously brought into agreement with the experimental results without invoking novel mechanisms suppressing Stark mixing in the (Heμ) L-shell.

Studies of Ventilatory Capacity and Histamine Response during Exposure to Isocyanate Vapour in Polyurethane Foam Manufacture

PubMed Central

Gandevia, Bryan

1963-01-01

Complaints of respiratory symptoms amongst workers in a factory using isocyanate to produce polyurethane foam led to a study of changes in ventilatory capacity in the course of several working days. Mean decreases of the order of 0·181. were observed in the forced expiratory volume at one second in 15 employees during each of three normal working shifts. No significant change occurred on days when a process involving the liberation of isocyanate was stopped, or when the men were given an oral aminophylline compound prophylactically. An aerosol of isoprenaline failed to reverse the decrease in ventilatory capacity observed during one normal working day. Approximately half the subjects studied were found to show increased bronchial sensitivity to a histamine aerosol; all were smokers, whereas none of the non-smokers showed a significant (over 10%) reduction in ventilatory capacity after histamine. Smokers and/or positive histamine reactors tended to show a greater decrease in ventilatory capacity during a working day than non-smokers or non-reactors. The present findings, which confirm clinical reports of adverse respiratory effects of isocyanate in low concentrations, are compared with other studies of ventilatory capacity during occupational exposure to respiratory irritants. PMID:14046157

Design, implementation and evaluation of an independent real-time safety layer for medical robotic systems using a force-torque-acceleration (FTA) sensor.

PubMed

Richter, Lars; Bruder, Ralf

2013-05-01

Most medical robotic systems require direct interaction or contact with the robot. Force-Torque (FT) sensors can easily be mounted to the robot to control the contact pressure. However, evaluation is often done in software, which leads to latencies. To overcome that, we developed an independent safety system, named FTA sensor, which is based on an FT sensor and an accelerometer. An embedded system (ES) runs a real-time monitoring system for continuously checking of the readings. In case of a collision or error, it instantaneously stops the robot via the robot's external emergency stop. We found that the ES implementing the FTA sensor has a maximum latency of [Formula: see text] ms to trigger the robot's emergency stop. For the standard settings in the application of robotized transcranial magnetic stimulation, the robot will stop after at most 4 mm. Therefore, it works as an independent safety layer preventing patient and/or operator from serious harm.

Proactive Control: Neural Oscillatory Correlates of Conflict Anticipation and Response Slowing.

PubMed

Chang, Andrew; Ide, Jaime S; Li, Hsin-Hung; Chen, Chien-Chung; Li, Chiang-Shan R

2017-01-01

Proactive control allows us to anticipate environmental changes and adjust behavioral strategy. In the laboratory, investigators have used a number of different behavioral paradigms, including the stop-signal task (SST), to examine the neural processes of proactive control. Previous functional MRI studies of the SST have demonstrated regional responses to conflict anticipation-the likelihood of a stop signal or P(stop) as estimated by a Bayesian model-and reaction time (RT) slowing and how these responses are interrelated. Here, in an electrophysiological study, we investigated the time-frequency domain substrates of proactive control. The results showed that conflict anticipation as indexed by P(stop) was positively correlated with the power in low-theta band (3-5 Hz) in the fixation (trial onset)-locked interval, and go-RT was negatively correlated with the power in delta-theta band (2-8 Hz) in the go-locked interval. Stimulus prediction error was positively correlated with the power in the low-beta band (12-22 Hz) in the stop-locked interval. Further, the power of the P(stop) and go-RT clusters was negatively correlated, providing a mechanism relating conflict anticipation to RT slowing in the SST. Source reconstruction with beamformer localized these time-frequency activities close to brain regions as revealed by functional MRI in earlier work. These are the novel results to show oscillatory electrophysiological substrates in support of trial-by-trial behavioral adjustment for proactive control.

Fan-shaped antennas: Realization of wideband characteristics and generation of stop bands

NASA Astrophysics Data System (ADS)

Nakano, H.; Morishita, K.; Iitsuka, Y.; Mimaki, H.; Yoshida, T.; Yamauchi, J.

2008-08-01

This paper presents four fan-shaped antennas: U.S.-FAN, CROSS-FAN, CROSS-FAN-W, and CROSS-FAN-S. Each of these antennas stands upright above a ground plane, and has edges expressed by an exponential function and a circle function. The four antennas are investigated using frequencies from 1.5 GHz to 11 GHz. The CROSS-FAN is found to have a lower VSWR over a wide frequency band compared to the U.S.-FAN. The CROSS-FAN-W and CROSS-FAN-S are modified versions of the CROSS-FAN, each designed to have a stop band (a high VSWR frequency range) for interference cancellation. The stop band for the CROSS-FAN-W is controlled by a wire (total length 4Lwire) that connects the fan-shaped elements. The center frequency of the stop band fstop is close to the frequency corresponding to a wire segment length Lwire of half the wavelength. It is also found that the stop band in the CROSS-FAN-S can be controlled by four slots, one cut into each of the fan-shaped elements. The center frequency of the stop band fstop is close to the frequency corresponding to a slot length Lslot of one-quarter of the wavelength. Experimental work is performed to confirm the theoretical results, using the CROSS-FAN-S.

Defense Transportation Regulation Part 2, Cargo Movement.

DTIC Science & Technology

1998-08-01

Stop-Off Unloading Point (DD Form 1371) 202-18 202-7 Route Order Amendment (DD Form 2017 ) 202-19 204-1 Hazardous Materials Classification...DRO/IRO/SRO amendments will be submitted to the appropriate MTMC routing authority or theater CINC using DD Form 2017 , Route Order Amendment...Figure 202-5. 7. An example of a DD Form 2017 , Route Order Amendment, is provided in Figure 202.7. D. EXCEPTION Exceptions to assignment of routing

Work Sampling Study of an Engineering Professor during a Regular Contract Period

ERIC Educational Resources Information Center

Brink, Jan; McDonald, Dale B.

2015-01-01

Work sampling is a technique that has been employed in industry and fields such as healthcare for some time. It is a powerful technique, and an alternative to conventional stop watch time studies, used by industrial engineers to focus upon random work sampling observations. This study applies work sampling to the duties performed by an individual…

Stop Exploitation Through Trafficking Act of 2014

THOMAS, 113th Congress

Sen. Klobuchar, Amy [D-MN

2014-07-14

Senate - 07/15/2014 Read the second time. Placed on Senate Legislative Calendar under General Orders. Calendar No. 464. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Dyes for displays

NASA Astrophysics Data System (ADS)

Claussen, U.

1984-01-01

The improvement of contrast and visibility of LCD by two different means was undertaken. The two methods are: (1) development of fluorescent dyes to increase the visibility of fluorescent activated displays (FLAD); and (2) development of dichroic dyes to increase the contrast of displays. This work was done in close cooperation with the electronic industry, where the newly synthesized dyes were tested. The targets for the chemical synthesis were selected with the help of computer model calculations. A marketable range of dyes was developed. Since the interest of the electronic industries concerning FLAD was low, the investigations were stopped. Dichroic dyes, especially black mixtures with good light fastness, order parameter, and solubility in nematic phases were developed. The application of these dyes is restricted to indoor use because of an increase of viscosity below -10 C. Applications on a technical scale, e.g., for the automotive industry, will be possible if the displays work at temperatures down to -40 C. This problem requires a complex optimization of the dye/nematic phase system.

One-stop endoscopic hernia surgery: efficient and satisfactory.

PubMed

Voorbrood, C E H; Burgmans, J P J; Clevers, G J; Davids, P H P; Verleisdonk, E J M M; Schouten, N; van Dalen, T

2015-06-01

One-stop surgery offers patients diagnostic work-up and subsequent surgical treatment on the same day. In the present study, patient satisfaction and efficiency from an institutional perspective were evaluated in patients who were referred for one-stop endoscopic inguinal hernia repair. In a high-volume inguinal hernia clinic, all consecutive patients referred for one-stop surgical treatment, were registered prospectively. An instructed secretary screened patients for eligibility for the one-stop option when the appointment was made. Totally extraperitoneal hernia repair under general anaesthesia was the preferred operative technique. Patient's satisfaction, successful day surgery and institutional efficiency were evaluated. Between January 2010 and January 2012 a total of 349 patients (17 % of all patients in the hernia clinic) were referred for one-stop hernia repair. Mean age was 47.5 years and 96.3 % were males. Three hundred thirty-six patients underwent hernia surgery on the same day (96.3 %). In thirteen patients (3.7 %) no operative repair was done on the day of presentation due to an incorrect diagnosis (n = 7), a watchful waiting policy for asymptomatic hernia (n = 3), rescheduling due to a large scrotal hernia, and there were two "no shows". Following hernia repair 97 % of the patients were discharged on the same day, while ten patients required hospitalization. Based on the questionnaires the main satisfaction score among patients was 9.0 (8.89-9.17 95 % CI) on a scale ranging from 0 to 10. One-stop hernia surgery is feasible and satisfactory from an institutional as well as from a patient's perspective.

The effects of venting and decompression on Yellow Tang (Zebrasoma flavescens) in the marine ornamental aquarium fish trade

PubMed Central

Tissot, Brian N.; Heidel, Jerry R.; Miller-Morgan, Tim

2015-01-01

Each year, over 45 countries export 30 million fish from coral reefs as part of the global marine ornamental aquarium trade. This catch volume is partly influenced by collection methods that cause mortality. Barotrauma in fish resulting from forced ascent from depth can contribute to post-collection mortality. However, implementing decompression stops during ascent can prevent barotrauma. Conversely, venting (puncturing the swim bladder to release expanded internal gas) following ascent can mitigate some signs of barotrauma like positive buoyancy. Here, we evaluate how decompression and venting affect stress and mortality in the Yellow Tang (Zebrasoma flavescens). We examined the effects of three ascent treatments, each with decompression stops of varying frequency and duration, coupled with or without venting, on sublethal effects and mortality using histology and serum cortisol measurements. In fish subjected to ascent without decompression stops or venting, a mean post-collection mortality of 6.2% occurred within 24 h of capture. Common collection methods in the fishery, ascent without decompression stops coupled with venting, or one long decompression stop coupled with venting, resulted in no mortality. Histopathologic examination of heart, liver, head kidney, and swim bladder tissues in fish 0d and 21d post-collection revealed no significant barotrauma- or venting-related lesions in any treatment group. Ascent without decompression stops resulted in significantly higher serum cortisol than ascent with many stops, while venting alone did not affect cortisol. Future work should examine links in the supply chain following collection to determine if further handling and transport stressors affect survivorship and sublethal effects. PMID:25737809

Stopping-power and mass energy-absorption coefficient ratios for Solid Water.

PubMed

Ho, A K; Paliwal, B R

1986-01-01

The AAPM Task Group 21 protocol provides tables of ratios of average restricted stopping powers and ratios of mean energy-absorption coefficients for different materials. These values were based on the work of Cunningham and Schulz. We have calculated these quantities for Solid Water (manufactured by RMI), using the same x-ray spectra and method as that used by Cunningham and Schulz. These values should be useful to people who are using Solid Water for high-energy photon calibration.

A novel broadband bi-mode active frequency selective surface

NASA Astrophysics Data System (ADS)

Xu, Yang; Gao, Jinsong; Xu, Nianxi; Shan, Dongzhi; Song, Naitao

2017-05-01

A novel broadband bi-mode active frequency selective surface (AFSS) is presented in this paper. The proposed structure is composed of a periodic array of convoluted square patches and Jerusalem Crosses. According to simulation results, the frequency response of AFSS definitely exhibits a mode switch feature between band-pass and band-stop modes when the diodes stay in ON and OFF states. In order to apply a uniform bias to each PIN diode, an ingenious biasing network based on the extension of Wheatstone bridge is adopted in prototype AFSS. The test results are in good agreement with the simulation results. A further physical mechanism of the bi-mode AFSS is shown by contrasting the distribution of electric field on the AFSS patterns for the two working states.

Fabrication and testing of a standoff trace explosives detection system

NASA Astrophysics Data System (ADS)

Waterbury, Robert; Rose, Jeremy; Vunck, Darius; Blank, Thomas; Pohl, Ken; Ford, Alan; McVay, Troy; Dottery, Ed

2011-05-01

In order to stop the transportation of materials used for IED manufacture, a standoff checkpoint explosives detection system (CPEDS) has recently been fabricated. The system incorporates multi-wavelength Raman spectroscopy and laser induced breakdown spectroscopy (LIBS) modalities with a LIBS enhancement technique called TEPS to be added later into a single unit for trace detection of explosives at military checkpoints. Newly developed spectrometers and other required sensors all integrated with a custom graphical user interface for producing simplified, real-time detection results are also included in the system. All equipment is housed in a military ruggedized shelter for potential deployment intheater for signature collection. Laboratory and performance data, as well as the construction of the CPEDS system and its potential deployment capabilities, will be presented in the current work.

Solid rocket technology advancements for space tug and IUS applications

NASA Technical Reports Server (NTRS)

Ascher, W.; Bailey, R. L.; Behm, J. W.; Gin, W.

1975-01-01

In order for the shuttle tug or interim upper stage (IUS) to capture all the missions in the current mission model for the tug and the IUS, an auxiliary or kick stage, using a solid propellant rocket motor, is required. Two solid propellant rocket motor technology concepts are described. One concept, called the 'advanced propulsion module' motor, is an 1800-kg, high-mass-fraction motor, which is single-burn and contains Class 2 propellent. The other concept, called the high energy upper stage restartable solid, is a two-burn (stop-restartable on command) motor which at present contains 1400 kg of Class 7 propellant. The details and status of the motor design and component and motor test results to date are presented, along with the schedule for future work.

Compensatable muon collider calorimeter with manageable backgrounds

DOEpatents

Raja, Rajendran

2015-02-17

A method and system for reducing background noise in a particle collider, comprises identifying an interaction point among a plurality of particles within a particle collider associated with a detector element, defining a trigger start time for each of the pixels as the time taken for light to travel from the interaction point to the pixel and a trigger stop time as a selected time after the trigger start time, and collecting only detections that occur between the start trigger time and the stop trigger time in order to thereafter compensate the result from the particle collider to reduce unwanted background detection.

Real-time stop sign detection and distance estimation using a single camera

NASA Astrophysics Data System (ADS)

Wang, Wenpeng; Su, Yuxuan; Cheng, Ming

2018-04-01

In modern world, the drastic development of driver assistance system has made driving a lot easier than before. In order to increase the safety onboard, a method was proposed to detect STOP sign and estimate distance using a single camera. In STOP sign detection, LBP-cascade classifier was applied to identify the sign in the image, and the principle of pinhole imaging was based for distance estimation. Road test was conducted using a detection system built with a CMOS camera and software developed by Python language with OpenCV library. Results shows that that the proposed system reach a detection accuracy of maximum of 97.6% at 10m, a minimum of 95.00% at 20m, and 5% max error in distance estimation. The results indicate that the system is effective and has the potential to be used in both autonomous driving and advanced driver assistance driving systems.

Etoposide

MedlinePlus

... in a class of medications known as podophyllotoxin derivatives. It works by slowing or stopping the growth ... This branded product is no longer on the market. Generic alternatives may be available.

A synergistic method for vibration suppression of an elevator mechatronic system

NASA Astrophysics Data System (ADS)

Knezevic, Bojan Z.; Blanusa, Branko; Marcetic, Darko P.

2017-10-01

Modern elevators are complex mechatronic systems which have to satisfy high performance in precision, safety and ride comfort. Each elevator mechatronic system (EMS) contains a mechanical subsystem which is characterized by its resonant frequency. In order to achieve high performance of the whole system, the control part of the EMS inevitably excites resonant circuits causing the occurrence of vibration. This paper proposes a synergistic solution based on the jerk control and the upgrade of the speed controller with a band-stop filter to restore lost ride comfort and speed control caused by vibration. The band-stop filter eliminates the resonant component from the speed controller spectra and jerk control provides operating of the speed controller in a linear mode as well as increased ride comfort. The original method for band-stop filter tuning based on Goertzel algorithm and Kiefer search algorithm is proposed in this paper. In order to generate the speed reference trajectory which can be defined by different shapes and amplitudes of jerk, a unique generalized model is proposed. The proposed algorithm is integrated in the power drive control algorithm and implemented on the digital signal processor. Through experimental verifications on a scale down prototype of the EMS it has been verified that only synergistic effect of controlling jerk and filtrating the reference torque can completely eliminate vibrations.

Spatio-Temporal Pattern Mining on Trajectory Data Using Arm

NASA Astrophysics Data System (ADS)

Khoshahval, S.; Farnaghi, M.; Taleai, M.

2017-09-01

Preliminary mobile was considered to be a device to make human connections easier. But today the consumption of this device has been evolved to a platform for gaming, web surfing and GPS-enabled application capabilities. Embedding GPS in handheld devices, altered them to significant trajectory data gathering facilities. Raw GPS trajectory data is a series of points which contains hidden information. For revealing hidden information in traces, trajectory data analysis is needed. One of the most beneficial concealed information in trajectory data is user activity patterns. In each pattern, there are multiple stops and moves which identifies users visited places and tasks. This paper proposes an approach to discover user daily activity patterns from GPS trajectories using association rules. Finding user patterns needs extraction of user's visited places from stops and moves of GPS trajectories. In order to locate stops and moves, we have implemented a place recognition algorithm. After extraction of visited points an advanced association rule mining algorithm, called Apriori was used to extract user activity patterns. This study outlined that there are useful patterns in each trajectory that can be emerged from raw GPS data using association rule mining techniques in order to find out about multiple users' behaviour in a system and can be utilized in various location-based applications.

29 CFR 530.103 - Employer assurances.

Code of Federal Regulations, 2011 CFR

2011-07-01

... homeworkers shall be established using stop watch time studies or other work measurement methods. (h) All... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS EMPLOYMENT... section 12. All homeworkers will be instructed not to permit minors to work in violation of such...

29 CFR 530.103 - Employer assurances.

Code of Federal Regulations, 2010 CFR

2010-07-01

... homeworkers shall be established using stop watch time studies or other work measurement methods. (h) All... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS EMPLOYMENT... section 12. All homeworkers will be instructed not to permit minors to work in violation of such...

Heat Waves

MedlinePlus

... This typically occurs when people exercise heavily or work in a hot, humid place where body fluids are lost through heavy sweating. Blood flow to the skin increases, causing blood flow to decrease to the vital organs. This ... cool the body, stops working. The body temperature can rise so high that ...

Investigation of truck mounted attenuator (TMA) crashes in work zones in Virginia.

DOT National Transportation Integrated Search

2015-10-01

Truck mounted attenuators (TMAs) are deployed on shadow vehicles in work zones to mitigate the effects of errant : vehicles that strike the shadow vehicle, either by smoothly decelerating the vehicle to a stop when hit head-on or by redirecting : the...

The role of retiree health insurance in the early retirement of public sector employees.

PubMed

Shoven, John B; Slavov, Sita Nataraj

2014-12-01

Most government employees have access to retiree health coverage, which provides them with group health coverage even if they retire before Medicare eligibility. We study the impact of retiree health coverage on the labor supply of public sector workers between the ages of 55 and 64. We find that retiree health coverage raises the probability of stopping full time work by 4.3 percentage points (around 38 percent) over two years among public sector workers aged 55-59, and by 6.7 percentage points (around 26 percent) over two years among public sector workers aged 60-64. In the younger age group, retiree health insurance mostly seems to facilitate transitions to part-time work rather than full retirement. However, in the older age group, it increases the probability of stopping work entirely by 4.3 percentage points (around 22 percent). Copyright © 2014 Elsevier B.V. All rights reserved.

Modeling driver stop/run behavior at the onset of a yellow indication considering driver run tendency and roadway surface conditions.

PubMed

Elhenawy, Mohammed; Jahangiri, Arash; Rakha, Hesham A; El-Shawarby, Ihab

2015-10-01

The ability to model driver stop/run behavior at signalized intersections considering the roadway surface condition is critical in the design of advanced driver assistance systems. Such systems can reduce intersection crashes and fatalities by predicting driver stop/run behavior. The research presented in this paper uses data collected from two controlled field experiments on the Smart Road at the Virginia Tech Transportation Institute (VTTI) to model driver stop/run behavior at the onset of a yellow indication for different roadway surface conditions. The paper offers two contributions. First, it introduces a new predictor related to driver aggressiveness and demonstrates that this measure enhances the modeling of driver stop/run behavior. Second, it applies well-known artificial intelligence techniques including: adaptive boosting (AdaBoost), random forest, and support vector machine (SVM) algorithms as well as traditional logistic regression techniques on the data in order to develop a model that can be used by traffic signal controllers to predict driver stop/run decisions in a connected vehicle environment. The research demonstrates that by adding the proposed driver aggressiveness predictor to the model, there is a statistically significant increase in the model accuracy. Moreover the false alarm rate is significantly reduced but this reduction is not statistically significant. The study demonstrates that, for the subject data, the SVM machine learning algorithm performs the best in terms of optimum classification accuracy and false positive rates. However, the SVM model produces the best performance in terms of the classification accuracy only. Copyright © 2015 Elsevier Ltd. All rights reserved.

Engagement of large-scale networks is related to individual differences in inhibitory control

PubMed Central

Congdon, Eliza; Mumford, Jeanette A.; Cohen, Jessica R.; Galvan, Adriana; Aron, Adam R.; Xue, Gui; Miller, Eric; Poldrack, Russell A.

2010-01-01

Understanding which brain regions regulate the execution, and suppression, of goal-directed behavior has implications for a number of areas of research. In particular, understanding which brain regions engaged during tasks requiring the execution and inhibition of a motor response provides insight into the mechanisms underlying individual differences in response inhibition ability. However, neuroimaging studies examing the relation between activation and stopping have been inconsistent regarding the direction of the relationship, and also regarding the anatomical location of regions that correlate with behavior. These limitations likely arise from the relatively low power of vox-elwise correlations with small sample sizes. Here, we pooled data over five separate fMRI studies of the Stop-signal task in order to obtain a sufficiently large sample size to robustly detect brain/behavior correlations. In addition, rather than performing mass univariate correlation analysis across all voxels, we increased statistical power by reducing the dimensionality of the data set using independent components analysis and then examined correlations between behavior and the resulting component scores. We found that components reflecting activity in regions thought to be involved in stopping were associated with better stopping ability, while activity in a default-mode network was associated with poorer stopping ability across individuals. These results clearly show a relationship between individual differences in stopping ability in specific activated networks, including regions known to be critical for the behavior. The results also highlight the usefulness of using dimensionality reduction to increase the power to detect brain/behavior correlations in individual differences research. PMID:20600962

Recent evidence for evolution of the genetic code

NASA Technical Reports Server (NTRS)

Osawa, S.; Jukes, T. H.; Watanabe, K.; Muto, A.

1992-01-01

The genetic code, formerly thought to be frozen, is now known to be in a state of evolution. This was first shown in 1979 by Barrell et al. (G. Barrell, A. T. Bankier, and J. Drouin, Nature [London] 282:189-194, 1979), who found that the universal codons AUA (isoleucine) and UGA (stop) coded for methionine and tryptophan, respectively, in human mitochondria. Subsequent studies have shown that UGA codes for tryptophan in Mycoplasma spp. and in all nonplant mitochondria that have been examined. Universal stop codons UAA and UAG code for glutamine in ciliated protozoa (except Euplotes octacarinatus) and in a green alga, Acetabularia. E. octacarinatus uses UAA for stop and UGA for cysteine. Candida species, which are yeasts, use CUG (leucine) for serine. Other departures from the universal code, all in nonplant mitochondria, are CUN (leucine) for threonine (in yeasts), AAA (lysine) for asparagine (in platyhelminths and echinoderms), UAA (stop) for tyrosine (in planaria), and AGR (arginine) for serine (in several animal orders) and for stop (in vertebrates). We propose that the changes are typically preceded by loss of a codon from all coding sequences in an organism or organelle, often as a result of directional mutation pressure, accompanied by loss of the tRNA that translates the codon. The codon reappears later by conversion of another codon and emergence of a tRNA that translates the reappeared codon with a different assignment. Changes in release factors also contribute to these revised assignments. We also discuss the use of UGA (stop) as a selenocysteine codon and the early history of the code.

STOP Identity Theft Act of 2014

THOMAS, 113th Congress

Rep. Wasserman Schultz, Debbie [D-FL-23

2013-02-15

Senate - 09/09/2014 Received in the Senate. Read twice. Placed on Senate Legislative Calendar under General Orders. Calendar No. 555. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Competing Core Processes in Attention-Deficit/Hyperactivity Disorder (ADHD): Do Working Memory Deficiencies Underlie Behavioral Inhibition Deficits?

ERIC Educational Resources Information Center

Alderson, R. Matt; Rapport, Mark D.; Hudec, Kristen L.; Sarver, Dustin E.; Kofler, Michael J.

2010-01-01

The current study examined competing predictions of the working memory and behavioral inhibition models of ADHD. Behavioral inhibition was measured using a conventional stop-signal task, and central executive, phonological, and visuospatial working memory components (Baddeley 2007) were assessed in 14 children with ADHD and 13 typically developing…

Deconstructed transverse mass variables

DOE PAGES

Ismail, Ahmed; Schwienhorst, Reinhard; Virzi, Joseph S.; ...

2015-04-02

Traditional searches for R-parity conserving natural supersymmetry (SUSY) require large transverse mass and missing energy cuts to separate the signal from large backgrounds. SUSY models with compressed spectra inherently produce signal events with small amounts of missing energy that are hard to explore. We use this difficulty to motivate the construction of "deconstructed" transverse mass variables which are designed preserve information on both the norm and direction of the missing momentum. Here, we demonstrate the effectiveness of these variables in searches for the pair production of supersymmetric top-quark partners which subsequently decay into a final state with an isolated lepton,more » jets and missing energy. We show that the use of deconstructed transverse mass variables extends the accessible compressed spectra parameter space beyond the region probed by traditional methods. The parameter space can further be expanded to neutralino masses that are larger than the difference between the stop and top masses. In addition, we also discuss how these variables allow for novel searches of single stop production, in order to directly probe unconstrained stealth stops in the small stop-and neutralino-mass regime. We also demonstrate the utility of these variables for generic gluino and stop searches in all-hadronic final states. Overall, we demonstrate that deconstructed transverse variables are essential to any search wanting to maximize signal separation from the background when the signal has undetected particles in the final state.« less

Sexuality, Textuality: The Cultural Work of Plagiarism.

ERIC Educational Resources Information Center

Howard, Rebecca Moore

2000-01-01

Considers how plagiarism continues to elude definition because teachers cannot possibly formulate and act on a definition of plagiarism that articulates both its textual and sexual work. Discusses linking sexual property to textual transgression and rejecting metaphors in relationship to rejecting plagiarism. Suggests educators stop using the term…

41 CFR 102-5.30 - What definitions apply to this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

... business or would substantially increase a Federal agency's efficiency and economy. Emergency means... locations other than his/her regular place of work. (Multiple stops (itinerant-type travel) within the... locations that are only accessible by Government-provided transportation are examples of field work.) Home...

Nitazoxanide

MedlinePlus

... diarrhea in children and adults caused by the protozoa Cryptosporidium or Giardia. Protozoa are suspected as the cause when diarrhea lasts ... It works by stopping the growth of certain protozoa that cause diarrhea.

Work disability remains a major problem in rheumatoid arthritis in the 2000s: data from 32 countries in the QUEST-RA study.

PubMed

Sokka, Tuulikki; Kautiainen, Hannu; Pincus, Theodore; Verstappen, Suzanne M M; Aggarwal, Amita; Alten, Rieke; Andersone, Daina; Badsha, Humeira; Baecklund, Eva; Belmonte, Miguel; Craig-Müller, Jürgen; da Mota, Licia Maria Henrique; Dimic, Alexander; Fathi, Nihal A; Ferraccioli, Gianfranco; Fukuda, Wataru; Géher, Pál; Gogus, Feride; Hajjaj-Hassouni, Najia; Hamoud, Hisham; Haugeberg, Glenn; Henrohn, Dan; Horslev-Petersen, Kim; Ionescu, Ruxandra; Karateew, Dmitry; Kuuse, Reet; Laurindo, Ieda Maria Magalhaes; Lazovskis, Juris; Luukkainen, Reijo; Mofti, Ayman; Murphy, Eithne; Nakajima, Ayako; Oyoo, Omondi; Pandya, Sapan C; Pohl, Christof; Predeteanu, Denisa; Rexhepi, Mjellma; Rexhepi, Sylejman; Sharma, Banwari; Shono, Eisuke; Sibilia, Jean; Sierakowski, Stanislaw; Skopouli, Fotini N; Stropuviene, Sigita; Toloza, Sergio; Valter, Ivo; Woolf, Anthony; Yamanaka, Hisashi

2010-01-01

Work disability is a major consequence of rheumatoid arthritis (RA), associated not only with traditional disease activity variables, but also more significantly with demographic, functional, occupational, and societal variables. Recent reports suggest that the use of biologic agents offers potential for reduced work disability rates, but the conclusions are based on surrogate disease activity measures derived from studies primarily from Western countries. The Quantitative Standard Monitoring of Patients with RA (QUEST-RA) multinational database of 8,039 patients in 86 sites in 32 countries, 16 with high gross domestic product (GDP) (>24K US dollars (USD) per capita) and 16 low-GDP countries (<11K USD), was analyzed for work and disability status at onset and over the course of RA and clinical status of patients who continued working or had stopped working in high-GDP versus low-GDP countries according to all RA Core Data Set measures. Associations of work disability status with RA Core Data Set variables and indices were analyzed using descriptive statistics and regression analyses. At the time of first symptoms, 86% of men (range 57%-100% among countries) and 64% (19%-87%) of women <65 years were working. More than one third (37%) of these patients reported subsequent work disability because of RA. Among 1,756 patients whose symptoms had begun during the 2000s, the probabilities of continuing to work were 80% (95% confidence interval (CI) 78%-82%) at 2 years and 68% (95% CI 65%-71%) at 5 years, with similar patterns in high-GDP and low-GDP countries. Patients who continued working versus stopped working had significantly better clinical status for all clinical status measures and patient self-report scores, with similar patterns in high-GDP and low-GDP countries. However, patients who had stopped working in high-GDP countries had better clinical status than patients who continued working in low-GDP countries. The most significant identifier of work disability in all subgroups was Health Assessment Questionnaire (HAQ) functional disability score. Work disability rates remain high among people with RA during this millennium. In low-GDP countries, people remain working with high levels of disability and disease activity. Cultural and economic differences between societies affect work disability as an outcome measure for RA.

Work disability remains a major problem in rheumatoid arthritis in the 2000s: data from 32 countries in the QUEST-RA Study

PubMed Central

2010-01-01

Introduction Work disability is a major consequence of rheumatoid arthritis (RA), associated not only with traditional disease activity variables, but also more significantly with demographic, functional, occupational, and societal variables. Recent reports suggest that the use of biologic agents offers potential for reduced work disability rates, but the conclusions are based on surrogate disease activity measures derived from studies primarily from Western countries. Methods The Quantitative Standard Monitoring of Patients with RA (QUEST-RA) multinational database of 8,039 patients in 86 sites in 32 countries, 16 with high gross domestic product (GDP) (>24K US dollars (USD) per capita) and 16 low-GDP countries (<11K USD), was analyzed for work and disability status at onset and over the course of RA and clinical status of patients who continued working or had stopped working in high-GDP versus low-GDP countries according to all RA Core Data Set measures. Associations of work disability status with RA Core Data Set variables and indices were analyzed using descriptive statistics and regression analyses. Results At the time of first symptoms, 86% of men (range 57%-100% among countries) and 64% (19%-87%) of women <65 years were working. More than one third (37%) of these patients reported subsequent work disability because of RA. Among 1,756 patients whose symptoms had begun during the 2000s, the probabilities of continuing to work were 80% (95% confidence interval (CI) 78%-82%) at 2 years and 68% (95% CI 65%-71%) at 5 years, with similar patterns in high-GDP and low-GDP countries. Patients who continued working versus stopped working had significantly better clinical status for all clinical status measures and patient self-report scores, with similar patterns in high-GDP and low-GDP countries. However, patients who had stopped working in high-GDP countries had better clinical status than patients who continued working in low-GDP countries. The most significant identifier of work disability in all subgroups was Health Assessment Questionnaire (HAQ) functional disability score. Conclusions Work disability rates remain high among people with RA during this millennium. In low-GDP countries, people remain working with high levels of disability and disease activity. Cultural and economic differences between societies affect work disability as an outcome measure for RA. PMID:20226018

Optimally Stopped Optimization

NASA Astrophysics Data System (ADS)

Vinci, Walter; Lidar, Daniel

We combine the fields of heuristic optimization and optimal stopping. We propose a strategy for benchmarking randomized optimization algorithms that minimizes the expected total cost for obtaining a good solution with an optimal number of calls to the solver. To do so, rather than letting the objective function alone define a cost to be minimized, we introduce a further cost-per-call of the algorithm. We show that this problem can be formulated using optimal stopping theory. The expected cost is a flexible figure of merit for benchmarking probabilistic solvers that can be computed when the optimal solution is not known, and that avoids the biases and arbitrariness that affect other measures. The optimal stopping formulation of benchmarking directly leads to a real-time, optimal-utilization strategy for probabilistic optimizers with practical impact. We apply our formulation to benchmark the performance of a D-Wave 2X quantum annealer and the HFS solver, a specialized classical heuristic algorithm designed for low tree-width graphs. On a set of frustrated-loop instances with planted solutions defined on up to N = 1098 variables, the D-Wave device is between one to two orders of magnitude faster than the HFS solver.

Proceedings of the RADC Spectrum Estimation Workshop (2nd) held 3, 4, & 5 October 1979, Griffiss AFB, NY

DTIC Science & Technology

1979-10-01

However, this author’s ex- perience has shown that most order selection rules , including Akaike’s, are not enough to be effeutive against the line splitting...and reduced spectral peak frequency estimation biases. A set of sensitive stopping rules for order se- L lection has been found for the algorithm...7] as the rule for order selection, the minimum FPE of the 41-point sequence with tne Burg algorithm was found at order 23. The AR spectrum based on

7 CFR 331.8 - Denial, revocation, or suspension of registration.

Code of Federal Regulations, 2010 CFR

2010-01-01

... organization that engages in domestic or international terrorism (as defined in 18 U.S.C. 2331) or with any...) Immediately stop all use of each select agent or toxin covered by the revocation or suspension order; (2...

7 CFR 331.8 - Denial, revocation, or suspension of registration.

Code of Federal Regulations, 2014 CFR

2014-01-01

... organization that engages in domestic or international terrorism (as defined in 18 U.S.C. 2331) or with any...) Immediately stop all use of each select agent or toxin covered by the revocation or suspension order; (2...

7 CFR 331.8 - Denial, revocation, or suspension of registration.

Code of Federal Regulations, 2011 CFR

2011-01-01

... organization that engages in domestic or international terrorism (as defined in 18 U.S.C. 2331) or with any...) Immediately stop all use of each select agent or toxin covered by the revocation or suspension order; (2...

7 CFR 331.8 - Denial, revocation, or suspension of registration.

Code of Federal Regulations, 2013 CFR

2013-01-01

... organization that engages in domestic or international terrorism (as defined in 18 U.S.C. 2331) or with any...) Immediately stop all use of each select agent or toxin covered by the revocation or suspension order; (2...

7 CFR 331.8 - Denial, revocation, or suspension of registration.

Code of Federal Regulations, 2012 CFR

2012-01-01

... organization that engages in domestic or international terrorism (as defined in 18 U.S.C. 2331) or with any...) Immediately stop all use of each select agent or toxin covered by the revocation or suspension order; (2...

Development of salt tolerant grasses for roadside use.

DOT National Transportation Integrated Search

2011-09-01

Roadsides in Rhode Island and elsewhere are planted to mowed turfgrass in order to prevent erosion, improve aesthetics, : maintain visibility, and provide a safe means of stopping errant vehicles. However, there are a number of ways in which : mowed ...

Heavy and overweight vehicle brake testing : combination six-axle, final report.

DOT National Transportation Integrated Search

2017-05-01

The Heavy and Overweight Vehicle Brake Testing (HOVBT) program exists in order to provide information about the effect of gross vehicle weight (GVW) and on braking performance testing included service brake stopping distance tests, constant-pressure ...

Proactive Control: Neural Oscillatory Correlates of Conflict Anticipation and Response Slowing

PubMed Central

Ide, Jaime S.

2017-01-01

Abstract Proactive control allows us to anticipate environmental changes and adjust behavioral strategy. In the laboratory, investigators have used a number of different behavioral paradigms, including the stop-signal task (SST), to examine the neural processes of proactive control. Previous functional MRI studies of the SST have demonstrated regional responses to conflict anticipation—the likelihood of a stop signal or P(stop) as estimated by a Bayesian model—and reaction time (RT) slowing and how these responses are interrelated. Here, in an electrophysiological study, we investigated the time–frequency domain substrates of proactive control. The results showed that conflict anticipation as indexed by P(stop) was positively correlated with the power in low-theta band (3–5 Hz) in the fixation (trial onset)-locked interval, and go-RT was negatively correlated with the power in delta-theta band (2–8 Hz) in the go-locked interval. Stimulus prediction error was positively correlated with the power in the low-beta band (12–22 Hz) in the stop-locked interval. Further, the power of the P(stop) and go-RT clusters was negatively correlated, providing a mechanism relating conflict anticipation to RT slowing in the SST. Source reconstruction with beamformer localized these time–frequency activities close to brain regions as revealed by functional MRI in earlier work. These are the novel results to show oscillatory electrophysiological substrates in support of trial-by-trial behavioral adjustment for proactive control. PMID:28560315

SU-G-TeP2-13: Patient-Specific Reduction of Range Uncertainties in Proton Therapy by Proton Radiography with a Multi-Layer Ionization Chamber

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deffet, S; Macq, B; Farace, P

2016-06-15

Purpose: The conversion from Hounsfield units (HU) to stopping powers is a major source of range uncertainty in proton therapy (PT). Our contribution shows how proton radiographs (PR) acquired with a multi-layer ionization chamber in a PT center can be used for accurate patient positioning and subsequently for patient-specific optimization of the conversion from HU to stopping powers. Methods: A multi-layer ionization chamber was used to measure the integral depth-dose (IDD) of 220 MeV pencil beam spots passing through several anthropomorphic phantoms. The whole area of interest was imaged by repositioning the couch and by acquiring a 45×45 mm{sup 2}more » frame for each position. A rigid registration algorithm was implemented to correct the positioning error between the proton radiographs and the planning CT. After registration, the stopping power map obtained from the planning CT with the calibration curve of the treatment planning system was used together with the water equivalent thickness gained from two proton radiographs to generate a phantom-specific stopping power map. Results: Our results show that it is possible to make a registration with submillimeter accuracy from proton radiography obtained by sending beamlets separated by more than 1 mm. This was made possible by the complex shape of the IDD due to the presence of lateral heterogeneities along the path of the beam. Submillimeter positioning was still possible with a 5 mm spot spacing. Phantom specific stopping power maps obtained by minimizing the range error were cross-verified by the acquisition of an additional proton radiography where the phantom was positioned in a random but known manner. Conclusion: Our results indicate that a CT-PR registration algorithm together with range-error based optimization can be used to produce a patient-specific stopping power map. Sylvain Deffet reports financial funding of its PhD thesis by Ion Beam Applications (IBA) during the confines of the study and outside the submitted work. Francois Vander Stappen reports being employed by Ion Beam Applications (IBA) during the confines of the study and outside the submitted work.« less

Nabumetone

MedlinePlus

... called NSAIDs. It works by stopping the body's production of a substance that causes pain, fever, and ... plan to avoid unnecessary or prolonged exposure to sunlight and to wear protective clothing, sunglasses, and sunscreen. ...

Pimozide

MedlinePlus

... treat severe tics that stop the person from learning, working, or performing daily activities.Pimozide is in ... of reach of children. Store it at room temperature and away from excess heat and moisture (not ...

Enzalutamide

MedlinePlus

... androgen receptor inhibitors. It works by blocking the effects of androgen (a male reproductive hormone) to stop ... decrease your dose if you experience serious side effects during your treatment. Be sure to talk to ...

Apalutamide

MedlinePlus

... androgen receptor inhibitors. It works by blocking the effects of androgen (a male reproductive hormone) to stop ... decrease your dose if you experience serious side effects during your treatment. Be sure to talk to ...

Bicalutamide

MedlinePlus

... called nonsteroidal antiandrogens. It works by blocking the effect of androgen (a male hormone), to stop the ... to your pharmacist or contact your local garbage/recycling department to learn about take-back programs in ...

Nilutamide

MedlinePlus

... medications called antiandrogens. It works by blocking the effect of androgen (a male hormone), to stop the ... to your pharmacist or contact your local garbage/recycling department to learn about take-back programs in ...

Flutamide

MedlinePlus

... called nonsteroidal antiandrogens. It works by blocking the effects of androgen (a male hormone) to stop the ... to your pharmacist or contact your local garbage/recycling department to learn about take-back programs in ...

Amoxicillin

MedlinePlus

... Amoxicillin is in a class of medications called penicillin-like antibiotics. It works by stopping the growth ... and pharmacist if you are allergic to amoxicillin; penicillin antibiotics; cephalosporin antibiotics such as cefaclor, cefadroxil, cefazolin ( ...

20 CFR 663.165 - How long must an individual be in core services in order to be eligible for intensive services?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false How long must an individual be in core...-Stop Delivery System § 663.165 How long must an individual be in core services in order to be eligible for intensive services? There is no Federally-required minimum time period for participation in core...

20 CFR 663.165 - How long must an individual be in core services in order to be eligible for intensive services?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false How long must an individual be in core...-Stop Delivery System § 663.165 How long must an individual be in core services in order to be eligible for intensive services? There is no Federally-required minimum time period for participation in core...

Crossing the Line: Collusion or Collaboration in University Group Work?

ERIC Educational Resources Information Center

Sutherland-Smith, Wendy

2013-01-01

"Almost everyone has difficulty identifying where collaboration stops and collusion begins." (Carroll & Appleton, 2001, p.15) In both policy and practice, collusion is a perplexing area of academic integrity. Students are expected to learn to work collaboratively in university courses, yet are often required to submit assessment…

77 FR 20789 - Work Group on Measuring Systems for Taxis

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

.... SUMMARY: The National Institute of Standards and Technology (NIST) is forming a Work Group (WG) to develop proposals to revise the current Taximeters Code in NIST Handbook 44 (HB 44), Specifications, Tolerances, and... CONTACT: Mr. John Barton, NIST, Office of Weights and Measures, 100 Bureau Drive, Stop 2600, Gaithersburg...

Seizures and Teens: When Medicines Don't Work--Devices & Diet

ERIC Educational Resources Information Center

Dean, Patricia

2007-01-01

When medicines do not work, the search for seizure control should not stop. Special diets or medical devices may be recommended to help control seizures. While not a cure for epilepsy, they may be able to help, especially for those who are not candidates for surgery or when surgery does not work. This article provides an overview of the devices…

Assignment Choice, Effort, and Assignment Completion: Does Work Ethic Predict Those Who Choose Higher-Effort Assignments?

ERIC Educational Resources Information Center

Parkhurst, John T.; Fleisher, Matthew S.; Skinner, Christopher H.; Woehr, David J.; Hawthorn-Embree, Meredith L.

2011-01-01

After completing the Multidimensional Work-Ethic Profile (MWEP), 98 college students were given a 20-problem math computation assignment and instructed to stop working on the assignment after completing 10 problems. Next, they were allowed to choose to finish either the partially completed assignment that had 10 problems remaining or a new…

A New Approach to Low-Wage Workers and Employers. Launching the Work Advancement and Support Center Demonstration

ERIC Educational Resources Information Center

Anderson, Jacquelyn; Kato, Linda Yuriko; Riccio, James A.; Blank, Susan

2006-01-01

Since 1998, federally funded One-Stop Service Centers around the country have focused primarily on assisting the unemployed into work. WASC tests a strategy that expands that mission by targeting people who are already working, but at low wages. Through career coaching, skills training, and better connections with employers - and led by a newly…

Salsalate

MedlinePlus

... called salicylates. It works by stopping the body's production of a substance that causes pain, fever, and ... send a report to the Food and Drug Administration's (FDA) MedWatch Adverse Event Reporting program online (http:// ...

Diflunisal

MedlinePlus

... called NSAIDs. It works by stopping the body's production of a substance that causes pain, fever, and ... send a report to the Food and Drug Administration's (FDA) MedWatch Adverse Event Reporting program online (http:// ...

Sulindac

MedlinePlus

... called NSAIDs. It works by stopping the body's production of a substance that causes pain, fever, and ... send a report to the Food and Drug Administration's (FDA) MedWatch Adverse Event Reporting program online (http:// ...

Clindamycin Vaginal

MedlinePlus

... an infection caused by an overgrowth of harmful bacteria in the vagina). Clindamycin is in a class ... works by slowing or stopping the growth of bacteria. Vaginal clindamycin cannot be used to treat vaginal ...

Neomycin, Polymyxin, and Bacitracin Ophthalmic

MedlinePlus

... infections. Neomycin, polymyxin, and bacitracin are in a class of medications called antibiotics. Neomycin, polymyxin, and bacitracin combination works by stopping the growth of bacteria infecting a surface of the eye.

Methodology of mixed load customized bus lines and adjustment based on time windows

PubMed Central

Song, Rui

2018-01-01

Custom bus routes need to be optimized to meet the needs of a customized bus for personalized trips of different passengers. This paper introduced a customized bus routing problem in which trips for each depot are given, and each bus stop has a fixed time window within which trips should be completed. Treating a trip as a virtual stop was the first consideration in solving the school bus routing problem (SBRP). Then, the mixed load custom bus routing model was established with a time window that satisfies its requirement and the result were solved by Cplex software. Finally, a simple network diagram with three depots, four pickup stops, and five delivery stops was structured to verify the correctness of the model, and based on the actual example, the result is that all the buses ran 124.42 kilometers, the sum of kilometers was 10.35 kilometers less than before. The paths and departure times of the different busses that were provided by the model were evaluated to meet the needs of the given conditions, thus providing valuable information for actual work. PMID:29320505

To stop or not to stop, that's the question: about persistence and mood of workaholics and work engaged employees.

PubMed

Van Wijhe, Corine I; Peeters, Maria C W; Schaufeli, Wilmar B

2011-12-01

Although workaholics and work engaged employees both work long hours, they seem to have a different underlying motivation to do so. The mood as input model might offer an explanation for the difference in work persistence of these employees. This model suggests that the interplay of mood and "persistence rules" (enough and enjoyment rules) may lead to different kinds of persistence mechanisms. The aims of this study are to present a scale for measuring persistence rules, the Work Persistence rules Checklist (WoPeC), to analyze its psychometric properties and to test the mood as input model in relationship with workaholism and work engagement. Structural equation modeling was used to analyze the data. Results of a confirmatory factor analysis in study 1 provided support for the hypothesized factor structure of the WoPeC. In study 2, it appeared that the use of an enough and an enjoyment rule for determining when to continue working is related to workaholism and work engagement, respectively. Furthermore, it was hypothesized and found that negative mood is related to workaholism, whereas positive mood is associated with work engagement. The expected interactions between mood and persistence rules on workaholism and work engagement were not demonstrated. Mood and persistence rules seem relevant for explaining the difference between workaholism and work engagement.

Problems in modernization of automation systems at coal preparation plants

NASA Astrophysics Data System (ADS)

Myshlyaev, L. P.; Lyakhovets, M. V.; Venger, K. G.; Leontiev, I. A.; Makarov, G. V.; Salamatin, A. S.

2018-05-01

The factors influencing the process of modernization (reconstruction) of the automation systems at coal preparation plants are described. Problems such as heterogeneity of existing and developed systems, planning of reconstruction of a technological complex without taking into account modernization of automated systems, commissioning without stopping the existing technological complex, as well as problems of conducting procurement procedures are discussed. The option of stage-by-stage start-up and adjustment works in the conditions of modernization of systems without long stops of the process equipment is offered.

78 FR 34156 - Hazardous Materials: Emergency Recall Order

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-06

... unilateral changes to its manufacturing process, quality control oversight, and cylinder designs without... never functioned as designed, and indicated that the shutdown device had not stopped the manufacturing... 33-pound cylinders. Jurisdiction Lite Cylinder manufactures or has manufactured, marked, certified...

Stop Targeting of Political Beliefs by the IRS Act of 2014

THOMAS, 113th Congress

Rep. Camp, Dave [R-MI-4

2014-01-14

Senate - 03/03/2014 Read the second time. Placed on Senate Legislative Calendar under General Orders. Calendar No. 313. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Male pattern baldness

MedlinePlus

... baldness. Medicines that treat male pattern baldness include: Minoxidil (Rogaine), a solution that is applied directly to ... slows hair loss. It works slightly better than minoxidil. Hair loss returns when you stop using this ...

How to Stop Steroid Medicines Safely

MedlinePlus

... Kids and Teens Pregnancy and Childbirth Women Men Seniors Your Health Resources Healthcare Management End-of-Life Issues Insurance & Bills Self Care Working With Your Doctor Drugs, Procedures & Devices Over-the- ...

Ketorolac Nasal Spray

MedlinePlus

... called NSAIDs. It works by stopping the body's production of a substance that causes pain, fever, and ... it at room temperature and away from direct sunlight, excess heat and moisture (not in the bathroom). ...

Nepafenac Ophthalmic

MedlinePlus

... inflammatory drugs (NSAIDs). It works by stopping the production of certain natural substances that cause pain and ... send a report to the Food and Drug Administration's (FDA) MedWatch Adverse Event Reporting program online (http:// ...

Chlorambucil

MedlinePlus

... Chlorambucil is in a class of medications called alkylating agents. It works by slowing or stopping the growth ... pharmacist if you are allergic to chlorambucil, other alkylating agents such as bendamustine (Treanda), busulfan (Myleran, Busulfex), carmustine ( ...

Opinions about the new law on end-of-life issues in a sample of french patients receiving palliative care.

PubMed

Boulanger, Augustin; Chabal, Théo; Fichaux, Marie; Destandau, Mireille; La Piana, Jean Marc; Auquier, Pascal; Baumstarck, Karine; Salas, Sébastien

2017-01-21

In February 2nd 2016, the French government enacted the Claeys-Leonetti law that forbade euthanasia and established the right to deep and continuous sedation for end-of-life patients. Moreover, the law also obliges clinicians to abide by any advance directives regarding treatment and investigation, except in cases where they are "obviously inappropriate" in a given medical situation, or in cases of emergency, in order to allow medical staff to take time to assess the patient's situation. Artificial feeding and hydration are considered as treatment. The aim of this report is to investigate individuals receiving palliative care about their opinion about euthanasia, about advance directives, about the right to deep and continuous sedation, and the right to stopping artificial feeding and hydration. The study was an opinion survey conducted among patients treated in two different palliative care institutions: a palliative care unit at the University Hospital (Timone, Marseille, France) and a non-profit association palliative care home ("La Maison", Gardanne, France). Face-to-face interviews were performed by two investigators. The survey included sociodemographics, clinical data, and opinions about euthanasia, deep and continuous sedation, stopping artificial feeding and hydration, and advance directives. Forty patients were interviewed. The mean age was 59.8 years (standard deviation 12). Fifty three percent reported opposition to legalized euthanasia. Eighty three percent were in favour of the right to deep and continuous sedation in patients with refractory pain, 75% when it concerns a patient unable to express their wishes, and 68% when the patient decides to stop vital treatment. Fifty eight percent reported that artificial nutrition and hydration should be considered as care. Fifty eight percent of the patients interviewed would like to see doctors follow the express wishes contained in advance care directives and 53% that advance directives should be subject to a validity period. This work demonstrates the feasibility of discussing sensitive issues such as euthanasia, continuous and deep sedation and cessation of care with patients receiving palliative care. These preliminary results point to the need to perform a larger study in order to find determinant factors in this specific situation and to incorporate them into thinking about end-of-life laws.

Substorm onset: Current sheet avalanche and stop layer

NASA Astrophysics Data System (ADS)

Haerendel, Gerhard

2015-03-01

A new scenario is presented for the onset of a substorm and the nature of the breakup arc. There are two main components, current sheet avalanche and stop layer. The first refers to an earthward flow of plasma and magnetic flux from the central current sheet of the tail, triggered spontaneously or by some unknown interaction with an auroral streamer or a suddenly appearing eastward flow at the end of the growth phase. The second offers a mechanism to stop the flow abruptly at the interface between magnetosphere and tail and extract momentum and energy to be partially processed locally and partially transmitted as Poynting flux toward the ionosphere. The stop layer has a width of the order of the ion inertial length. The different dynamics of the ions entering freely and the magnetized electrons create an electric polarization field which stops the ion flow and drives a Hall current by which flow momentum is transferred to the magnetic field. A simple formalism is used to describe the operation of the process and to enable quantitative conclusions. An important conclusion is that by necessity the stop layer is also highly structured in longitude. This offers a natural explanation for the coarse ray structure of the breakup arc as manifestation of elementary paths of energy and momentum transport. The currents aligned with the rays are balanced between upward and downward directions. While the avalanche is invoked for explaining the spontaneous substorm onset at the inner edge of the tail, the expansion of the breakup arc for many minutes is taken as evidence for a continued formation of new stop layers by arrival of flow bursts from the near-Earth neutral line. This is in line with earlier conclusions about the nature of the breakup arc. Small-scale structure, propagation speed, and energy flux are quantitatively consistent with observations. However, the balanced small-scale currents cannot constitute the substorm current wedge. The source of the latter must be located just earthward of the stop layer in the near-dipolar magnetosphere and be powered by the internal energy of the flow bursts. The stop layer mechanism is in some way the inverse of reconnection, as it converts flow into electromagnetic energy, and may have wide applicability in astrophysical plasmas.

The Association between Access to Public Transportation and Self-Reported Active Commuting

PubMed Central

Djurhuus, Sune; Hansen, Henning S.; Aadahl, Mette; Glümer, Charlotte

2014-01-01

Active commuting provides routine-based regular physical activity which can reduce the risk of chronic diseases. Using public transportation involves some walking or cycling to a transit stop, transfers and a walk to the end location and users of public transportation have been found to accumulate more moderate physical activity than non-users. Understanding how public transportation characteristics are associated with active transportation is thus important from a public health perspective. This study examines the associations between objective measures of access to public transportation and self-reported active commuting. Self-reported time spent either walking or cycling commuting each day and the distance to workplace were obtained for adults aged 16 to 65 in the Danish National Health Survey 2010 (n = 28,928). Access to public transportation measures were computed by combining GIS-based road network distances from home address to public transit stops an integrating their service level. Multilevel logistic regression was used to examine the association between access to public transportation measures and active commuting. Distance to bus stop, density of bus stops, and number of transport modes were all positively associated with being an active commuter and with meeting recommendations of physical activity. No significant association was found between bus services at the nearest stop and active commuting. The results highlight the importance of including detailed measurements of access to public transit in order to identify the characteristics that facilitate the use of public transportation and active commuting. PMID:25489998

The association between access to public transportation and self-reported active commuting.

PubMed

Djurhuus, Sune; Hansen, Henning S; Aadahl, Mette; Glümer, Charlotte

2014-12-05

Active commuting provides routine-based regular physical activity which can reduce the risk of chronic diseases. Using public transportation involves some walking or cycling to a transit stop, transfers and a walk to the end location and users of public transportation have been found to accumulate more moderate physical activity than non-users. Understanding how public transportation characteristics are associated with active transportation is thus important from a public health perspective. This study examines the associations between objective measures of access to public transportation and self-reported active commuting. Self-reported time spent either walking or cycling commuting each day and the distance to workplace were obtained for adults aged 16 to 65 in the Danish National Health Survey 2010 (n = 28,928). Access to public transportation measures were computed by combining GIS-based road network distances from home address to public transit stops an integrating their service level. Multilevel logistic regression was used to examine the association between access to public transportation measures and active commuting. Distance to bus stop, density of bus stops, and number of transport modes were all positively associated with being an active commuter and with meeting recommendations of physical activity. No significant association was found between bus services at the nearest stop and active commuting. The results highlight the importance of including detailed measurements of access to public transit in order to identify the characteristics that facilitate the use of public transportation and active commuting.

When your child's treatment stops working

MedlinePlus

... animals your child loves. Alternative Names End of life care - children; Palliative care - children; Advance care planning - children References American Society of Clinical Oncology (ASCO). Caring for a Terminally Ill Child: A ...

Amoxicillin and Clavulanic Acid

MedlinePlus

... Amoxicillin is in a class of medications called penicillin-like antibiotics. It works by stopping the growth ... allergic to amoxicillin (Amoxil, Trimox, Wymox), clavulanic acid, penicillin, cephalosporins, or any other medications.tell your doctor ...

Ampicillin and Sulbactam Injection

MedlinePlus

... Ampicillin is in a class of medications called penicillin-like antibiotics. It works by stopping the growth ... pharmacist if you are allergic to ampicillin; sulbactam; penicillin antibiotics; cephalosporin antibiotics such as cefaclor, cefadroxil, cefazolin ( ...

Nedocromil Ophthalmic

MedlinePlus

... allergies occur when cells in your body called mast cells release substances after you come in contact with ... Nedocromil is in a class of drugs called mast cell stabilizers. It works by stopping the release of ...

Selective alkylation of T–T mismatched DNA using vinyldiaminotriazine–acridine conjugate

PubMed Central

Onizuka, Kazumitsu; Usami, Akira; Yamaoki, Yudai; Kobayashi, Tomohito; Hazemi, Madoka E; Chikuni, Tomoko; Sato, Norihiro; Sasaki, Kaname; Katahira, Masato

2018-01-01

Abstract The alkylation of the specific higher-order nucleic acid structures is of great significance in order to control its function and gene expression. In this report, we have described the T–T mismatch selective alkylation with a vinyldiaminotriazine (VDAT)–acridine conjugate. The alkylation selectively proceeded at the N3 position of thymidine on the T–T mismatch. Interestingly, the alkylated thymidine induced base flipping of the complementary base in the duplex. In a model experiment for the alkylation of the CTG repeats DNA which causes myotonic dystrophy type 1 (DM1), the observed reaction rate for one alkylation increased in proportion to the number of T–T mismatches. In addition, we showed that primer extension reactions with DNA polymerase and transcription with RNA polymerase were stopped by the alkylation. The alkylation of the repeat DNA will efficiently work for the inhibition of replication and transcription reactions. These functions of the VDAT–acridine conjugate would be useful as a new biochemical tool for the study of CTG repeats and may provide a new strategy for the molecular therapy of DM1. PMID:29309639

Tomographic iterative reconstruction of a passive scalar in a 3D turbulent flow

NASA Astrophysics Data System (ADS)

Pisso, Ignacio; Kylling, Arve; Cassiani, Massimo; Solveig Dinger, Anne; Stebel, Kerstin; Schmidbauer, Norbert; Stohl, Andreas

2017-04-01

Turbulence in stable planetary boundary layers often encountered in high latitudes influences the exchange fluxes of heat, momentum, water vapor and greenhouse gases between the Earth's surface and the atmosphere. In climate and meteorological models, such effects of turbulence need to be parameterized, ultimately based on experimental data. A novel experimental approach is being developed within the COMTESSA project in order to study turbulence statistics at high resolution. Using controlled tracer releases, high-resolution camera images and estimates of the background radiation, different tomographic algorithms can be applied in order to obtain time series of 3D representations of the scalar dispersion. In this preliminary work, using synthetic data, we investigate different reconstruction algorithms with emphasis on algebraic methods. We study the dependence of the reconstruction quality on the discretization resolution and the geometry of the experimental device in both 2 and 3-D cases. We assess the computational aspects of the iterative algorithms focusing of the phenomenon of semi-convergence applying a variety of stopping rules. We discuss different strategies for error reduction and regularization of the ill-posed problem.

Testing and Optimization of Electrically Conductive Spacecraft Coatings

NASA Technical Reports Server (NTRS)

Mell, R. J.; Wertz, G. E.; Edwards, D. L. (Technical Monitor)

2001-01-01

This is the final report discussing the work done for the Space Environments and Effects (SEE) Program. It discusses test chamber design, coating research, and test results on electrically thermal control coatings. These thermal control coatings are being developed to have several orders of magnitude higher electrical conductivity than most available thermal control coatings. Most current coatings tend to have a range in surface resistivity from 1,011 to 1,013 ohms/sq. Historically, spacecraft have had thermal control surfaces composed of dielectric materials of either polymers (paints and metalized films) or glasses (ceramic paints and optical solar reflectors). Very seldom has the thermal control surface of a spacecraft been a metal where the surface would be intrinsically electrically conductive. The poor thermal optical properties of most metals have, in most cases, stopped them from being used as a thermal control surface. Metals low infrared emittance (generally considered poor for thermal control surfaces) and/or solar absorptance, have resulted in the use of various dielectric coatings or films being applied over the substrate materials in order to obtain the required optical properties.

Some practical aspects of designing a large inventory

Treesearch

Kim Iles

2000-01-01

Designing a large multiresource inventory is horribly difficult, it is not work for faint hearts, and the 250,000,000-acre size of British Columbia is not a trivial problem. Completion of the details (as opposed to stopping the work) is a process prone to collapse. After that point, implementation is also likely to fail.

Letter to the Editor: Nutritional epidemiology data should be analyzed by nutritional epidemiologists

USDA-ARS?s Scientific Manuscript database

The Energy Balance Working Group recently reported on the inaccuracy of self-report energy intake (EI) and issued a twin plea for researchers to stop using these data as outcomes and for newer, more accurate measures to be developed. I echo The Energy Balance Working Group's urgency for new measures...

Career Development Specialties for the 21st Century. Trends and Issues Alert No. 13.

ERIC Educational Resources Information Center

Kerka, Sandra

The need for career development services is growing. One-stop career centers and school-to-work programs have spurred demand for career development facilitators (CDFs). Working under the supervision of a qualified career counselor, CDFs can serve the following functions: career group facilitator, job search trainer, career resource center…

Sleep disruption increases seizure susceptibility: Behavioral and EEG evaluation of an experimental model of sleep apnea.

PubMed

Hrnčić, Dragan; Grubač, Željko; Rašić-Marković, Aleksandra; Šutulović, Nikola; Šušić, Veselinka; Bjekić-Macut, Jelica; Stanojlović, Olivera

2016-03-01

Sleep disruption accompanies sleep apnea as one of its major symptoms. Obstructive sleep apnea is particularly common in patients with refractory epilepsy, but causing factors underlying this are far from being resolved. Therefore, translational studies regarding this issue are important. Our aim was to investigate the effects of sleep disruption on seizure susceptibility of rats using experimental model of lindane-induced refractory seizures. Sleep disruption in male Wistar rats with implanted EEG electrodes was achieved by treadmill method (belt speed set on 0.02 m/s for working and 0.00 m/s for stop mode, respectively). Animals were assigned to experimental conditions lasting 6h: 1) sleep disruption (sleep interrupted, SI; 30s working and 90 s stop mode every 2 min; 180 cycles in total); 2) activity control (AC, 10 min working and 30 min stop mode, 9 cycles in total); 3) treadmill chamber control (TC, only stop mode). Afterwards, the animals were intraperitoneally treated with lindane (L, 4 mg/kg, SI+L, AC+L and TC+L groups) or dimethylsulfoxide (DMSO, SIc, ACc and TCc groups). Convulsive behavior was assessed by seizure incidence, latency time to first seizure, and its severity during 30 min after drug administration. Number and duration of ictal periods were determined in recorded EEGs. Incidence and severity of lindane-induced seizures were significantly increased, latency time significantly decreased in animals undergoing sleep disruption (SI+L group) compared with the animals from TC+L. Seizure latency was also significantly decreased in SI+L compared to AC+L groups. Number of ictal periods were increased and duration of it presented tendency to increase in SI+L comparing to AC+L. No convulsive signs were observed in TCc, ACc and SIc groups, as well as no ictal periods in EEG. These results indicate sleep disruption facilitates induction of epileptic activity in rodent model of lindane-epilepsy enabling translational research of this phenomenon. Copyright © 2015 Elsevier Inc. All rights reserved.

Sudden Cardiac Arrest

MedlinePlus

... SCA. Physical stress, which can cause the heart’s electrical system to stop working. In people who already ... the heart’s structure may cause problems with its electrical system, increasing the risk of arrhythmias. What are ...

Elbasvir and Grazoprevir

MedlinePlus

... treat a certain type of chronic (long-term) hepatitis C infection (swelling of the liver caused by a ... It works by stopping the virus that causes hepatitis C from spreading inside the body. Grazoprevir is in ...

Daclatasvir

MedlinePlus

... Solvadi]) to treat a certain type of chronic hepatitis C (an ongoing viral infection that damages the liver). ... is in a class of antiviral medications called hepatitis C virus (HCV) NS5A inhibitors. It works by stopping ...

Epoetin Alfa Injection

MedlinePlus

Epoetin alfa injection is used to treat anemia (a lower than normal number of red blood cells) in people ... stop working over a period of time). Epoetin alfa injection is also used to treat anemia caused ...

Darbepoetin Alfa Injection

MedlinePlus

Darbepoetin alfa injection is used to treat anemia (a lower than normal number of red blood cells) in people ... stop working over a period of time). Darbepoetin alfa injection is also used to treat anemia caused ...

Chemotherapy-Induced Peripheral Neuropathy

Cancer.gov

The pain and discomfort caused by peripheral neuropathy is one of the most common reasons that cancer patients stop their treatment early. Researchers are working to improve new screening, treatment, and prevention options for patients.

Heavily Boron-Doped Silicon Layer for the Fabrication of Nanoscale Thermoelectric Devices

PubMed Central

Liu, Yang; Deng, Lingxiao; Zhang, Mingliang; Zhang, Shuyuan; Ma, Jing; Song, Peishuai; Liu, Qing; Ji, An; Yang, Fuhua; Wang, Xiaodong

2018-01-01

Heavily boron-doped silicon layers and boron etch-stop techniques have been widely used in the fabrication of microelectromechanical systems (MEMS). This paper provides an introduction to the fabrication process of nanoscale silicon thermoelectric devices. Low-dimensional structures such as silicon nanowire (SiNW) have been considered as a promising alternative for thermoelectric applications in order to achieve a higher thermoelectric figure of merit (ZT) than bulk silicon. Here, heavily boron-doped silicon layers and boron etch-stop processes for the fabrication of suspended SiNWs will be discussed in detail, including boron diffusion, electron beam lithography, inductively coupled plasma (ICP) etching and tetramethylammonium hydroxide (TMAH) etch-stop processes. A 7 μm long nanowire structure with a height of 280 nm and a width of 55 nm was achieved, indicating that the proposed technique is useful for nanoscale fabrication. Furthermore, a SiNW thermoelectric device has also been demonstrated, and its performance shows an obvious reduction in thermal conductivity. PMID:29385759

3D printed plastics for beam modulation in proton therapy

NASA Astrophysics Data System (ADS)

Lindsay, C.; Kumlin, J.; Jirasek, A.; Lee, R.; Martinez, D. M.; Schaffer, P.; Hoehr, C.

2015-06-01

Two 3D printing methods, fused filament fabrication (FFF) and PolyJet™ (PJ) were investigated for suitability in clinical proton therapy (PT) energy modulation. Measurements of printing precision, printed density and mean stopping power are presented. FFF is found to be accurate to 0.1 mm, to contain a void fraction of 13% due to air pockets and to have a mean stopping power dependent on geometry. PJ was found to print accurate to 0.05 mm, with a material density and mean stopping power consistent with solid poly(methyl methacrylate) (PMMA). Both FFF and PJ were found to print significant, sporadic defects associated with sharp edges on the order of 0.2 mm. Site standard PT modulator wheels were printed using both methods. Measured depth-dose profiles with a 74 MeV beam show poor agreement between PMMA and printed FFF wheels. PJ printed wheel depth-dose agreed with PMMA within 1% of treatment dose except for a distal falloff discrepancy of 0.5 mm.

Short-term cessation of sex work and injection drug use: evidence from a recurrent event survival analysis.

PubMed

Gaines, Tommi L; Urada, Lianne A; Martinez, Gustavo; Goldenberg, Shira M; Rangel, Gudelia; Reed, Elizabeth; Patterson, Thomas L; Strathdee, Steffanie A

2015-06-01

This study quantitatively examined the prevalence and correlates of short-term sex work cessation among female sex workers who inject drugs (FSW-IDUs) and determined whether injection drug use was independently associated with cessation. We used data from FSW-IDUs (n=467) enrolled into an intervention designed to increase condom use and decrease sharing of injection equipment but was not designed to promote sex work cessation. We applied a survival analysis that accounted for quit-re-entry patterns of sex work over 1-year stratified by city, Tijuana and Ciudad Juarez, Mexico. Overall, 55% of participants stopped sex work at least once during follow-up. Controlling for other characteristics and intervention assignment, injection drug use was inversely associated with short-term sex work cessation in both cities. In Ciudad Juarez, women receiving drug treatment during follow-up had a 2-fold increase in the hazard of stopping sex work. In both cities, income from sources other than sex work, police interactions and healthcare access were independently and significantly associated with shorter-term cessation. Short-term sex work cessation was significantly affected by injection drug use. Expanded drug treatment and counseling coupled with supportive services such as relapse prevention, job training, and provision of alternate employment opportunities may promote longer-term cessation among women motivated to leave the sex industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

Short-Term Cessation of Sex Work and Injection Drug Use: Evidence from a Recurrent Event Survival Analysis

PubMed Central

Gaines, Tommi L.; Urada, Lianne; Martinez, Gustavo; Goldenberg, Shira M.; Rangel, Gudelia; Reed, Elizabeth; Patterson, Thomas L.; Strathdee, Steffanie A.

2015-01-01

Objective This study quantitatively examined the prevalence and correlates of short-term sex work cessation among female sex workers who inject drugs (FSW-IDUs) and determined whether injection drug use was independently associated with cessation. Methods We used data from FSW-IDUs (n=467) enrolled into an intervention designed to increase condom use and decrease sharing of injection equipment but was not designed to promote sex work cessation. We applied a survival analysis that accounted for quit-re-entry patterns of sex work over 1-year stratified by city, Tijuana and Ciudad Juarez, Mexico. Results Overall, 55% of participants stopped sex work at least once during follow-up. Controlling for other characteristics and intervention assignment, injection drug use was inversely associated with short-term sex work cessation in both cities. In Ciudad Juarez, women receiving drug treatment during follow-up had a 2-fold increase in the hazard of stopping sex work. In both cities, income from sources other than sex work, police interactions and healthcare access were independently and significantly associated with shorter-term cessation. Conclusions Short-term sex work cessation was significantly affected by injection drug use. Expanded drug treatment and counseling coupled with supportive services such as relapse prevention, job training, and provision of alternate employment opportunities may promote longer-term cessation among women motivated to leave the sex industry. PMID:25644589

[Exploring the prospects for general practitioners over 55 years old from three counties of western France].

PubMed

Robino, Stéphane; Buis, Hélène; Delansorne, Fanny; Tomas, Josiane; Huez, Jean-François; La Combe, Antoine; Fanello, Serge

2009-01-01

Medical demography and the practice of medicine will be influenced by the personal plans of GPs and their decisions to stop practicing in the coming years. This study aims to understand the events that could potentially worsen the medical demography in terms of shortages of GPs for primary care in the short term. 455 GPs (all aged over 55 years) practicing in three districts of western France were selected to participate in this prospective study. 258 valid and complete questionnaires (56%) were received. With the use of a special programme, SPSS version 1.5, an overall comprehensive analysis and one by geographical sub-regional groups were performed. When queried about their plans or wishes for their practice between the present time and their age of 65, of the responding physicians, 27% wanted to continue working under the same conditions, 10% were undecided, and 63% wanted to stop or adjust their professional activity before age 65. The main reasons and factors motivating these plans were their current time constraints, the workload related to administrative tasks and the continuity of care; moreover, GPs noted the demands and expectations of patients, professional burnout and difficulties in obtaining a healthy work-life balance as factors contributing to these plans. Physicians who wanted to stop practicing (30%) were the least satisfied with their work and seem to have anticipated this plan of action given that they reduced their number of hours in the office and on-call. Those who wish to adapt their work time (33%) are for the most part satisfied even if they work more, but 70% want to reduce their work hours. The impact of these projects is a potentially heavy one, especially since two of the counties concerned have a low medical density and high rate of practicing physicians. Government measures currently proposed do not seem to respond to the evolution of private practice expected by GPs over 55 years.

Carmustine Implant

MedlinePlus

... works by slowing or stopping the growth of cancer cells in your body. ... are pregnant, plan to become pregnant, or are breast-feeding. If you become pregnant while receiving carmustine implant, call your doctor. Carmustine may harm the fetus.

Randomised preference trial of medical versus surgical termination of pregnancy less than 14 weeks' gestation (TOPS).

PubMed

Robson, S C; Kelly, T; Howel, D; Deverill, M; Hewison, J; Lie, M L S; Stamp, E; Armstrong, N; May, C R

2009-11-01

To determine the acceptability, efficacy and costs of medical termination of pregnancy (MTOP) compared with surgical termination of pregnancy (STOP) at less than 14 weeks' gestation, and to understand women's decision-making processes and experiences when accessing the termination service. A partially randomised preference trial and economic evaluation with follow-up at 2 weeks and 3 months. The Royal Victoria Infirmary, Newcastle upon Tyne, UK. Women accepted for termination of pregnancy (TOP) under the relevant Acts of Parliament with pregnancies < 14 weeks' gestation on the day of abortion. A further group of women attending contraception and sexual health clinics participated in a discrete choice experiment (DCE). STOP: all women > or = 6 weeks' and < 14 weeks' gestation were primed with misoprostol 400 micrograms 2 hours before the procedure. STOP was performed under general anaesthesia using vacuum aspiration. MTOP: all women < 14 weeks' gestation were given mifepristone 200 milligrams orally, returning 36-48 hours later for misoprostol. Main outcome measure was acceptability of TOP method. Secondary outcome measures included strength of preference by willingness to pay (WTP); distress, using the Impact of Event Scale (IES); anxiety and depression; satisfaction with care; experience of care; frequency and extent of symptoms including self-assessment of pain; clinical effectiveness; and complications. A DCE was used to identify attributes that shape women's preferences for abortion services. The trial recruited 1877 women, 349 in the randomised arms and 1528 in the preference arms. Of those in the preference arms, 54% chose MTOP. At 2 weeks after the procedure more women having STOP would choose the same method again in the future. Acceptability of MTOP declined with increasing gestational age. The difference in acceptability between STOP and MTOP persisted at 3 months. At 2 weeks after TOP, women in the preference arms were prepared to pay more to have their preferred option. There was no difference in anxiety or depression scores in women having MTOP or STOP. However, women randomised to MTOP had higher scores on subscales of the IES at both 2 weeks and 3 months. There was no difference in IES scores between MTOP and STOP in the preference arm. Women were more likely to be satisfied overall and with technical and interpersonal aspects of care if they had STOP rather than MTOP. Experience of care scores were lower after MTOP in both randomised and preference arms. During admission women undergoing MTOP had more symptoms and reported higher mean pain scores, and after discharge reported more nausea and diarrhoea. There were no differences in time taken to return to work between groups; around 90% had returned to work and normal activity by 2 weeks. Rates of unplanned or emergency admissions were higher after MTOP than after STOP. Overall complication rates were also higher after MTOP, although this only achieved statistical significance in the preference arm. Overall, STOP cost more than MTOP due to higher inpatient standard costs. Even though complication rates were higher with MTOP, it was still more cost-effective. DCE identified three attributes with an almost equal impact on women's preferences: provision of counselling, number of days delay to the procedure, and possibility of an overnight stay. MTOP was associated with more negative experiences of care and lower acceptability. Acceptability of MTOP declined with increasing gestational age. MTOP was less costly but also less effective than STOP. The majority of women choosing MTOP were satisfied with their care and found the procedure acceptable. RECOMMENDATIONS FOR FURTHER RESEARCH: An audit of provision of MTOP and STOP in England and Wales is urgently required. Further studies exploring the barriers to offering women the choice of method of TOP are needed, together with research on the acceptability and effectiveness of (1) MTOP and manual VA in pregnancies below 9 weeks' gestation and (2) MTOP and dilatation and evacuation after 14 weeks' gestation. Current Controlled Trials ISRCTN07823656.

Using Student Writing and Lexical Analysis to Reveal Student Thinking about the Role of Stop Codons in the Central Dogma

PubMed Central

Prevost, Luanna B.; Smith, Michelle K.; Knight, Jennifer K.

2016-01-01

Previous work has shown that students have persistent difficulties in understanding how central dogma processes can be affected by a stop codon mutation. To explore these difficulties, we modified two multiple-choice questions from the Genetics Concept Assessment into three open-ended questions that asked students to write about how a stop codon mutation potentially impacts replication, transcription, and translation. We then used computer-assisted lexical analysis combined with human scoring to categorize student responses. The lexical analysis models showed high agreement with human scoring, demonstrating that this approach can be successfully used to analyze large numbers of student written responses. The results of this analysis show that students’ ideas about one process in the central dogma can affect their thinking about subsequent and previous processes, leading to mixed models of conceptual understanding. PMID:27909016

Evidence for enhanced multi-component behaviour in Tourette syndrome - an EEG study.

PubMed

Brandt, Valerie C; Stock, Ann-Kathrin; Münchau, Alexander; Beste, Christian

2017-08-10

Evidence suggests that Tourette syndrome is characterized by an increase in dopamine transmission and structural as well as functional changes in fronto-striatal circuits that might lead to enhanced multi-component behaviour integration. Behavioural and neurophysiological data regarding multi-component behaviour was collected from 15 patients with Tourette syndrome (mean age = 30.40 ± 11.10) and 15 healthy controls (27.07 ± 5.44), using the stop-change task. In this task, participants are asked to sometimes withhold responses to a Go stimulus (stop cue) and change hands to respond to an alternative Go stimulus (change cue). Different onset asynchronies between stop and change cues were implemented (0 and 300 ms) in order to vary task difficulty. Tourette patients responded more accurately than healthy controls when there was no delay between stop and change stimulus, while there was no difference in the 300 ms delay condition. This performance advantage was reflected in a smaller P3 event related potential. Enhanced multi-component behaviour in Tourette syndrome is likely based on an enhanced ability to integrate information from multiple sources and translate it into an appropriate response sequence. This may be a consequence of chronic tic control in these patients, or a known fronto-striatal networks hyperconnectivity in Tourette syndrome.

Rational decision-making in inhibitory control.

PubMed

Shenoy, Pradeep; Yu, Angela J

2011-01-01

An important aspect of cognitive flexibility is inhibitory control, the ability to dynamically modify or cancel planned actions in response to changes in the sensory environment or task demands. We formulate a probabilistic, rational decision-making framework for inhibitory control in the stop signal paradigm. Our model posits that subjects maintain a Bayes-optimal, continually updated representation of sensory inputs, and repeatedly assess the relative value of stopping and going on a fine temporal scale, in order to make an optimal decision on when and whether to go on each trial. We further posit that they implement this continual evaluation with respect to a global objective function capturing the various reward and penalties associated with different behavioral outcomes, such as speed and accuracy, or the relative costs of stop errors and go errors. We demonstrate that our rational decision-making model naturally gives rise to basic behavioral characteristics consistently observed for this paradigm, as well as more subtle effects due to contextual factors such as reward contingencies or motivational factors. Furthermore, we show that the classical race model can be seen as a computationally simpler, perhaps neurally plausible, approximation to optimal decision-making. This conceptual link allows us to predict how the parameters of the race model, such as the stopping latency, should change with task parameters and individual experiences/ability.

Rational Decision-Making in Inhibitory Control

PubMed Central

Shenoy, Pradeep; Yu, Angela J.

2011-01-01

An important aspect of cognitive flexibility is inhibitory control, the ability to dynamically modify or cancel planned actions in response to changes in the sensory environment or task demands. We formulate a probabilistic, rational decision-making framework for inhibitory control in the stop signal paradigm. Our model posits that subjects maintain a Bayes-optimal, continually updated representation of sensory inputs, and repeatedly assess the relative value of stopping and going on a fine temporal scale, in order to make an optimal decision on when and whether to go on each trial. We further posit that they implement this continual evaluation with respect to a global objective function capturing the various reward and penalties associated with different behavioral outcomes, such as speed and accuracy, or the relative costs of stop errors and go errors. We demonstrate that our rational decision-making model naturally gives rise to basic behavioral characteristics consistently observed for this paradigm, as well as more subtle effects due to contextual factors such as reward contingencies or motivational factors. Furthermore, we show that the classical race model can be seen as a computationally simpler, perhaps neurally plausible, approximation to optimal decision-making. This conceptual link allows us to predict how the parameters of the race model, such as the stopping latency, should change with task parameters and individual experiences/ability. PMID:21647306

Why Do Students Drop Advanced Mathematics?

ERIC Educational Resources Information Center

Horn, Ilana

2004-01-01

Students, especially black, Latino and Native American youth and students of low socio-economic status drop out of advanced mathematics. Teachers must coordinate their expectations, their knowledge of students and their teaching practices in order to stop struggling students from dropping out of advanced math classes.

46 CFR 71.15-5 - Alternate compliance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... list of authorized classification societies, including information for ordering copies of approved classification society rules and supplements, is available from Commandant (CG-521), 2100 2nd St. SW., Stop 7126, Washington, DC 20593-7126; telephone (202) 372-1372; or fax (202) 372-1925. Approved classification society...

46 CFR 71.15-5 - Alternate compliance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... list of authorized classification societies, including information for ordering copies of approved classification society rules and supplements, is available from Commandant (CG-521), 2100 2nd St. SW., Stop 7126, Washington, DC 20593-7126; telephone (202) 372-1372; or fax (202) 372-1925. Approved classification society...

Band-gap analysis of a novel lattice with a hierarchical periodicity using the spectral element method

NASA Astrophysics Data System (ADS)

Wu, Zhijing; Li, Fengming; Zhang, Chuanzeng

2018-05-01

Inspired by the hierarchical structures of butterfly wing surfaces, a new kind of lattice structures with a two-order hierarchical periodicity is proposed and designed, and the band-gap properties are investigated by the spectral element method (SEM). The equations of motion of the whole structure are established considering the macro and micro periodicities of the system. The efficiency of the SEM is exploited in the modeling process and validated by comparing the results with that of the finite element method (FEM). Based on the highly accurate results in the frequency domain, the dynamic behaviors of the proposed two-order hierarchical structures are analyzed. An original and interesting finding is the existence of the distinct macro and micro stop-bands in the given frequency domain. The mechanisms for these two types of band-gaps are also explored. Finally, the relations between the hierarchical periodicities and the different types of the stop-bands are investigated by analyzing the parametrical influences.

Demystifying "oxi" cocaine: Chemical profiling analysis of a "new Brazilian drug" from Acre State.

PubMed

da Silva Junior, Ronaldo C; Gomes, Cezar S; Goulart Júnior, Saulo S; Almeida, Fernanda V; Grobério, Tatiane S; Braga, Jez W B; Zacca, Jorge J; Vieira, Maurício L; Botelho, Elvio D; Maldaner, Adriano O

2012-09-10

Recent information from various sources suggests that a new illicit drug, called "oxi", is being spread across Brazil. It would be used in the smoked form and it would look like to crack cocaine: usually small yellowish or light brown stones. As fully released in the media, "oxi" would differ from crack cocaine in the sense that crack would contain carbonate or bicarbonate salts whereas "oxi" would include the addition of calcium oxide and kerosene (or gasoline). In this context, this work presents a chemical profiling comparative study between "oxi" street samples seized by the Civil Police of the State of Acre (CP/AC) and samples associated with both international and interstate drug trafficking seized by the Brazilian Federal Police in Acre (FP/AC). The outcome of this work assisted Brazilian authorities to stop inaccurate and alarmist releases on this issue. It may be of good use by the forensic community in order to better understand matters in their efforts to guide local law enforcement agencies in case such claims reach the international illicit market. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

MRI textures as outcome predictor for Gamma Knife radiosurgery on vestibular schwannoma

NASA Astrophysics Data System (ADS)

Langenhuizen, P. P. J. H.; Legters, M. J. W.; Zinger, S.; Verheul, H. B.; Leenstra, S.; de With, P. H. N.

2018-02-01

Vestibular schwannomas (VS) are benign brain tumors that can be treated with high-precision focused radiation with the Gamma Knife in order to stop tumor growth. Outcome prediction of Gamma Knife radiosurgery (GKRS) treatment can help in determining whether GKRS will be effective on an individual patient basis. However, at present, prognostic factors of tumor control after GKRS for VS are largely unknown, and only clinical factors, such as size of the tumor at treatment and pre-treatment growth rate of the tumor, have been considered thus far. This research aims at outcome prediction of GKRS by means of quantitative texture feature analysis on conventional MRI scans. We compute first-order statistics and features based on gray-level co- occurrence (GLCM) and run-length matrices (RLM), and employ support vector machines and decision trees for classification. In a clinical dataset, consisting of 20 tumors showing treatment failure and 20 tumors exhibiting treatment success, we have discovered that the second-order statistical metrics distilled from GLCM and RLM are suitable for describing texture, but are slightly outperformed by simple first-order statistics, like mean, standard deviation and median. The obtained prediction accuracy is about 85%, but a final choice of the best feature can only be made after performing more extensive analyses on larger datasets. In any case, this work provides suitable texture measures for successful prediction of GKRS treatment outcome for VS.

[Professional or household performance of patients with breast cancer undergoing chemotherapy].

PubMed

Martins, Lourdes Conceição; Ferreira Filho, Celso; Del Giglio, Auro; Munhoes, Daniela Armonia; Trevizan, Lígia Lopes Balsalobre; Herbst, Lívia Grigoriitchuk; Viera, Mariana da Cunha; Taranto, Patrícia; Pachon, Susy Cunha

2009-01-01

Evaluate patients with breast cancer undergoing chemotherapy with respect to their epidemiologic and clinical variables as well as performance at work or at home. this was a cross-sectional study including 52 women interviewed during breast cancer chemotherapy, stratified in two groups: those who continued to work and do household tasks, and did not continue to work or do household tasks. Patients were from two public hospitals in the State of São Paulo, one in Santo Andre and the other in São Bernardo do Campo. The WPAI - GH (Work Productivity and Activity Impairment) questionnaire was used to evaluate work and household performance of professionals or housewives, respectively. Mean age of the patients was 55.7 (SD=13.8), most were Caucasian (88.5%), married (55.8%), employed (65.3%) and the majority had to stop working because of treatment (51.0%), at more advanced stage (p<0.05), fatigue and nausea (p<0.05). Mean WPAI - GH was 67.04 (|SD = 5.62) for patients who stopped working and 49.17 (SD = 6.89) for those who continued to work (Mann-Whitney U test: p = 0.04). Chemotherapy leads to a decrease in performance of a sizable fraction of women with breast cancer undergoing chemotherapy. A more advanced stage of neoplasia was positively associated with withdrawal from these activities probably due to side effects such as fatigue and nausea.

Optical Alignment and Diffraction Analysis for AIRES: An Airborne Infrared Echelle Spectrometer

NASA Technical Reports Server (NTRS)

Haas, Michael R.; Fonda, Mark (Technical Monitor)

2002-01-01

The optical design is presented for a long-slit grating spectrometer known as AIRES (Airborne InfraRed Echelle Spectrometer). The instrument employs two gratings in series: a small order sorter and a large steeply blazed echelle. The optical path includes four pupil and four field stops, including two narrow slits. A detailed diffraction analysis is performed using GLAD by Applied Optics Research to evaluate critical trade-offs between optical throughput, spectral resolution, and system weight and volume. The effects of slit width, slit length, oversizing the second slit relative to the first, on- vs off-axis throughput, and clipping at the pupil stops and other optical elements are discussed.

Growing Lots of Food Very Fast Can Hurt our Water for a Long Time, Longer Than You Might Think

NASA Astrophysics Data System (ADS)

Van Meter, K. J.; Basu, N. B.

2016-12-01

More people arrive here every day, and we keep trying to grow enough food for them to eat. We try to grow more and more by adding things that can hurt our water and our air. We try to keep track of these things that we add, but we don't understand where it all goes. We don't understand how much is in the ground. We don't understand how much is in the water under the ground. We don't understand how long the water will be bad, even after we stop adding things to help grow more food. Many people have tried to stop adding these things, or to stop these things from getting to the water, and they get sad when they have worked hard to do better but the water stays bad. In our work, we try to help people understand how to make the water better, even when they have to grow a lot of food. We have looked at the ground all around where people grow a lot of food, and have found that some of the bad things stay behind in the ground. This means that even when we work hard to make our water good, the things left in the ground might make our water stay bad for a long time. We tried to find out how long it would take to make our water good if we are working our hardest to be better. It will take longer than you might think, maybe three times as many years as you have fingers.

This Land Is Our Land: A Guide to Multicultural Literature for Children and Young Adults.

ERIC Educational Resources Information Center

Helbig, Alethea K.; Perkins, Agnes Regan

This annotated bibliography of recent works of fiction, oral tradition, and poetry about the experiences and traditions of African-Americans, Asian-Americans, Hispanic-Americans and Native-Americans provides a one-stop selection tool. Only those works mainly about minority characters are presented, and inclusion decisions were made based on…

77 FR 2569 - Agency Information Collection Activities; Comment Request for Information Collection: Guam...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... wage offer for working any overtime hours; (h) The wage offer, and the benefits, if any, offered; (i) A... not have an adverse effect on either the wages or the working conditions of U.S. construction workers... their intermediaries in One-Stop Career Centers and the employment service delivery system nationwide...

How to stop drinking

MedlinePlus

... If you have withdrawal symptoms , such as trembling hands, when you go without alcohol, you should not try to quit on your own. It may be life threatening. Work with your provider to find a safe way to quit.

Metronidazole Vaginal

MedlinePlus

... is used to treat vaginal infections such as bacterial vaginosis (an infection caused from too much of certain bacteria in the vagina). Metronidazole is in a class of medications called nitroimidazole antimicrobials. It works by stopping the growth of bacteria.

Naproxen

MedlinePlus

... relieve mild pain from headaches, muscle aches, arthritis, menstrual periods, the common cold, toothaches, and backaches. Naproxen is in a class of medications called NSAIDs. It works by stopping the body's production of a substance that causes pain, fever, and inflammation.

Hemodialysis access procedures

MedlinePlus

... waste from your blood. When your kidneys stop working, dialysis can be used to clean your blood. Dialysis is usually done 3 times a week and takes about 3 to 4 hours. Risks With any type of access, you have ...

CPAP Tips

MedlinePlus

... starting stop Loading... Watch Queue Queue __count__/__total__ YouTube Premium Loading... Get YouTube without the ads. Working... No thanks 3-months ... use your CPAP device. Category Education License Standard YouTube License Show more Show less Comments are disabled ...

Lidocaine Transdermal Patch

MedlinePlus

... It works by stopping nerves from sending pain signals. ... time and the length of time you may wear the patches. Never apply more than three patches at one time, and never wear patches for more than 12 hours per day. ...

Stopping power beyond the adiabatic approximation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caro, M.; Correa, A. A.; Artacho, E.

2017-06-01

Energetic ions traveling in solids deposit energy in a variety of ways, being nuclear and electronic stopping the two avenues in which dissipation is usually treated. This separation between electrons and ions relies on the adiabatic approximation in which ions interact via forces derived from the instantaneous electronic ground state. In a more detailed view, in which non-adiabatic effects are explicitly considered, electronic excitations alter the atomic bonding, which translates into changes in the interatomic forces. In this work, we use time dependent density functional theory and forces derived from the equations of Ehrenfest dynamics that depend instantaneously on themore » time-dependent electronic density. With them we analyze how the inter-ionic forces are affected by electronic excitations in a model of a Ni projectile interacting with a Ni target, a metallic system with strong electronic stopping and shallow core level states. We find that the electronic excitations induce substantial modifications to the inter-ionic forces, which translate into nuclear stopping power well above the adiabatic prediction. Particularly, we observe that most of the alteration of the adiabatic potential in early times comes from the ionization of the core levels of the target ions, not readily screened by the valence electrons.« less

NHTSA's heavy duty vehicle brake research program report number 11 : evaluation of stopping performance of trailer antilock brake systems

DOT National Transportation Integrated Search

1997-04-01

In order to better understand the functioning of antilock brake systems on pneumatically braked trailers, a series of tests were conducted to evaluate different ABS control strategies, performance variations among systems supplied by different manufa...

The Criminalization of Domestic Violence: What Social Workers Need To Know.

ERIC Educational Resources Information Center

Danis, Fran S.

2003-01-01

This article reviews the social science, legal, and criminal justice literature regarding interventions used to stop domestic violence. Examines the theoretical foundations and effectiveness of police interventions, the use of protective orders, prosecutions and victim advocacy, court responses, and coordinated community responses to domestic…

48 CFR 852.236-87 - Accident prevention.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Accident prevention. 852... Accident prevention. As prescribed in 836.513, insert the following clause: Accident Prevention (SEP 1993....236-13, Accident Prevention. However, only the Contracting Officer may issue an order to stop all or...

48 CFR 852.236-87 - Accident prevention.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Accident prevention. 852... Accident prevention. As prescribed in 836.513, insert the following clause: Accident Prevention (SEP 1993....236-13, Accident Prevention. However, only the Contracting Officer may issue an order to stop all or...

46 CFR 189.15-5 - Alternate compliance.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., a list of authorized classification societies, including information for ordering copies of approved classification society rules and supplements, is available from Commandant (CG-521), 2100 2nd St., SW., Stop 7126, Washington, DC 20593-7126; telephone (202) 372-1371; or fax (202) 372-1925. Approved classification society...

46 CFR 189.15-5 - Alternate compliance.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., a list of authorized classification societies, including information for ordering copies of approved classification society rules and supplements, is available from Commandant (CG-521), 2100 2nd St., SW., Stop 7126, Washington, DC 20593-7126; telephone (202) 372-1371; or fax (202) 372-1925. Approved classification society...

Liquid spreading under partial wetting conditions

NASA Astrophysics Data System (ADS)

Chen, M.; Pahlavan, A. A.; Cueto-Felgueroso, L.; McKinley, G. H.; Juanes, R.

2013-12-01

Traditional mathematical descriptions of multiphase flow in porous media rely on a multiphase extension of Darcy's law, and lead to nonlinear second-order (advection-diffusion) partial differential equations for fluid saturations. Here, we study horizontal redistribution of immiscible fluids. The traditional Darcy-flow model predicts that the spreading of a finite amount of liquid in a horizontal porous medium never stops; a prediction that is not substantiated by observation. To help guide the development of new models of multiphase flow in porous media [1], we draw an analogy with the flow of thin films. The flow of thin films over flat surfaces has been the subject of much theoretical, experimental and computational research [2]. Under the lubrication approximation, the classical mathematical model for these flows takes the form of a nonlinear fourth-order PDE, where the fourth-order term models the effect of surface tension [3]. This classical model, however, effectively assumes that the film is perfectly wetting to the substrate and, therefore, does not capture the partial wetting regime. Partial wetting is responsible for stopping the spread of a liquid puddle. Here, we present experiments of (large-volume) liquid spreading over a flat horizontal substrate in the partial wetting regime, and characterize the four spreading regimes that we observe. We extend our previous theoretical work of two-phase flow in a capillary tube [4], and develop a macroscopic phase-field modeling of thin-film flows with partial wetting. Our model naturally accounts for the dynamic contact angle at the contact line, and therefore permits modeling thin-film flows without invoking a precursor film, leading to compactly-supported solutions that reproduce the spreading dynamics and the static equilibrium configuration observed in the experiments. We anticipate that this modeling approach will provide a natural mathematical framework to describe spreading and redistribution of immiscible fluids in porous media. [1] L. Cueto-Felgueroso and R. Juanes, Phys. Rev. Lett. 101, 244504 (2008). [2] D. Bonn et al., Rev. Mod. Phys. 81, 739-805 (2009). [3] H. E. Huppert, Nature 300, 427-429 (1982). [4] L. Cueto-Felgueroso and R. Juanes, Phys. Rev. Lett. 108, 144502 (2012).

A Neuro-Mechanical Model Explaining the Physiological Role of Fast and Slow Muscle Fibres at Stop and Start of Stepping of an Insect Leg

PubMed Central

Toth, Tibor Istvan; Grabowska, Martyna; Schmidt, Joachim; Büschges, Ansgar; Daun-Gruhn, Silvia

2013-01-01

Stop and start of stepping are two basic actions of the musculo-skeletal system of a leg. Although they are basic phenomena, they require the coordinated activities of the leg muscles. However, little is known of the details of how these activities are generated by the interactions between the local neuronal networks controlling the fast and slow muscle fibres at the individual leg joints. In the present work, we aim at uncovering some of those details using a suitable neuro-mechanical model. It is an extension of the model in the accompanying paper and now includes all three antagonistic muscle pairs of the main joints of an insect leg, together with their dedicated neuronal control, as well as common inhibitory motoneurons and the residual stiffness of the slow muscles. This model enabled us to study putative processes of intra-leg coordination during stop and start of stepping. We also made use of the effects of sensory signals encoding the position and velocity of the leg joints. Where experimental observations are available, the corresponding simulation results are in good agreement with them. Our model makes detailed predictions as to the coordination processes of the individual muscle systems both at stop and start of stepping. In particular, it reveals a possible role of the slow muscle fibres at stop in accelerating the convergence of the leg to its steady-state position. These findings lend our model physiological relevance and can therefore be used to elucidate details of the stop and start of stepping in insects, and perhaps in other animals, too. PMID:24278108

The NSCL cyclotron gas stopper - Entering commissioning

NASA Astrophysics Data System (ADS)

Schwarz, S.; Bollen, G.; Chouhan, S.; Das, J. J.; Green, M.; Magsig, C.; Morrissey, D. J.; Ottarson, J.; Sumithrarachchi, C.; Villari, A. C. C.; Zeller, A.

2016-06-01

Linear gas stopping cells have been used successfully at NSCL to slow down ions produced by projectile fragmentation from the 100 MeV/u to the keV energy range. These 'stopped beams' have first been used for low-energy high precision experiments and more recently for NSCLs re-accelerator ReA. A gas-filled reverse cyclotron is currently under construction by the NSCL to complement the existing stopping cells: Due to its extended stopping length, efficient stopping and fast extraction is expected even for light and medium-mass ions, which are difficult to thermalize in linear gas cells. The device is based on a 2.6 T maximum-field cyclotron-type magnet to confine the injected beam while it is slowed down in ≈100 mbar of LN2-temperature helium gas. Once thermalized, the beam will be transported to the center of the device by a traveling-wave RF-carpet system, extracted along the symmetry axis with an ion conveyor and miniature RF-carpets, and accelerated to a few tens of keV of energy for delivery to the users. The superconducting magnet has been constructed on a 60 kV platform and energized to its nominal field strength. The magnet's two cryostats use 3 cryo-refrigerators each and liquid-nitrogen cooled thermal shields to cool the coil pair to superconductivity. This concept, chosen not to have to rely on external liquid helium, has been working well. Measurements of axial and radial field profiles confirm the field calculations. The individual RF-ion guiding components for low-energy ion transport through the device have been tested successfully. The beam stopping chamber with its 0.9 m-diameter RF carpet system and the ion extraction system are being prepared for installation inside the magnet for low-energy ion transport tests.

Electron beam diagnostic for profiling high power beams

DOEpatents

Elmer, John W [Danville, CA; Palmer, Todd A [Livermore, CA; Teruya, Alan T [Livermore, CA

2008-03-25

A system for characterizing high power electron beams at power levels of 10 kW and above is described. This system is comprised of a slit disk assembly having a multitude of radial slits, a conducting disk with the same number of radial slits located below the slit disk assembly, a Faraday cup assembly located below the conducting disk, and a start-stop target located proximate the slit disk assembly. In order to keep the system from over-heating during use, a heat sink is placed in close proximity to the components discussed above, and an active cooling system, using water, for example, can be integrated into the heat sink. During use, the high power beam is initially directed onto a start-stop target and after reaching its full power is translated around the slit disk assembly, wherein the beam enters the radial slits and the conducting disk radial slits and is detected at the Faraday cup assembly. A trigger probe assembly can also be integrated into the system in order to aid in the determination of the proper orientation of the beam during reconstruction. After passing over each of the slits, the beam is then rapidly translated back to the start-stop target to minimize the amount of time that the high power beam comes in contact with the slit disk assembly. The data obtained by the system is then transferred into a computer system, where a computer tomography algorithm is used to reconstruct the power density distribution of the beam.

Better Field Instruction by Using Jigsaw Groups

NASA Astrophysics Data System (ADS)

Sammons, J. I.; Murray, D. P.

2006-12-01

Do any of these sound familiar? Most of my students do well at field stops, but there are always the few at the back. I'd like to guest speak at the local High School, but the students have too little background. I wish I could spark the interest of my introductory classes. Jigsaw is the solution to these problems. This easy-to-apply technique puts students in the driver's seat. They make the inferences-they own the discovery. You'll see that "A-ha!" as though it were a first time event. Jigsaw brings new excitement to familiar activities for every student in your class, even that guy in the back. Best of all, the technique does not depend on the style or force of personality of the instructor. It is easy to learn and suitable for use by Teaching Assistants. Here's how it works: 1. Identify the critical concepts necessary for a full understanding of the field stop or activity. 2. Divide your class into Expert Groups. The members of each Expert Group will master one of these critical concepts. 3.Dissolve the Expert Groups. Divide your class into new Jigsaw Groups to address the field stop or activity. Each Jigsaw Group includes members from each Expert Group. Like pieces of a puzzle, each Jigsaw Group member brings a critical piece to the problem. This talk will demonstrate Jigsaw Groups in action at a field stop. You'll see the crucial identification of critical concepts, small lab explorations carried out by the Expert Groups to master their assigned concepts, and Jigsaw Groups working a complex geological feature. You'll learn how to trouble-shoot less-than-successful first attempts and you'll leave with a step-by-step template that will allow you to adapt your existing activities to Jigsaw technique.

Heavy and Overweight Vehicle Brake Testing: Five-Axle Combination Tractor-Flatbed Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lascurain, Mary Beth; Capps, Gary J; Franzese, Oscar

The Federal Motor Carrier Safety Administration, in coordination with the Federal Highway Administration, sponsored the Heavy and Overweight Vehicle Brake Testing (HOVBT) program in order to provide information about the effect of gross vehicle weight (GVW) on braking performance. Because the Federal Motor Carrier Safety Regulations limit the number of braking system defects that may exist for a vehicle to be allowed to operate on the roadways, the examination of the effect of brake defects on brake performance for increased loads is also relevant. The HOVBT program seeks to provide relevant information to policy makers responsible for establishing load limits,more » beginning with providing test data for a combination tractor/trailer. This testing was conducted on a five-axle combination vehicle with tractor brakes meeting the Reduced Stopping Distance requirement rulemaking. This report provides a summary of the testing activities, the results of various analyses of the data, and recommendations for future research. Following a complete brake rebuild, instrumentation, and brake burnish, stopping tests were performed from 20 and 40 mph with various brake application pressures (15 psi, 25 psi, 35 psi, 45 psi, 55 psi, and full system pressure). These tests were conducted for various brake conditions at the following GVWs: 60,000, 80,000, 91,000, 97,000, 106,000, and 116,000 lb. The 80,000-lb GVWs included both balanced and unbalanced loads. The condition of the braking system was also varied. To introduce these defects, brakes (none, forward drive axle, or rear trailer axle) were made inoperative. In addition to the stopping tests, performance-based brake tests were conducted for the various loading and brake conditions. Analysis of the stopping test data showed the stopping distance to increase with load (as expected) and also showed that more braking force was generated by the drive axle brakes than the trailer axle brakes. The constant-pressure stopping test data revealed a linear relationship between brake application pressure and was used to develop an algorithm to normalize stopping data for weight and initial speed.« less

Measuring the performance of transit relative to livability.

DOT National Transportation Integrated Search

2013-03-01

This project sought to understand the relationship between urban form, transit service characteristics, and ridership measured at the stop level. Most previous work in this area has looked at these issues separately, by either linking system performa...

47. INTERIOR VIEW, DETAIL OF CONVEYOR BELT SYSTEM SYSTEM WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

47. INTERIOR VIEW, DETAIL OF CONVEYOR BELT SYSTEM SYSTEM WITH BACK BELT DROPPING HARDENED NAILS ON THE FRONT BELT TO BE TEMPERED; MOTION STOPPED - LaBelle Iron Works, Thirtieth & Wood Streets, Wheeling, Ohio County, WV

Stopping the Spread of Germs at Home, Work and School

MedlinePlus

... influenza viruses that research indicates will be most common during the upcoming season. There are several flu vaccine options for the 2017-2018 flu season . Good Health Habits Avoid close contact. Avoid close contact ...

Work at sea: a study of sleep, and of circadian rhythms in physiological and psychological functions, in watchkeepers on merchant vessels. VI. A sea trial of an alternative watchkeeping system for the merchant marine.

PubMed

Fletcher, N; Colquhoun, W P; Knauth, P; De Vol, D; Plett, R

1988-01-01

A trial of an alternative to the traditional 4-on/8-off watchkeeping system was made on a container ship during a round trip from Europe to the Far East. The three navigating officers on the ship operated the new system, which involved "compressed" working hours with a long unbroken period of rest, during two sections of the voyage, one of which included six stops at ports. Despite unforeseen problems arising mainly from these stops, questionnaire responses concerning the new system were not altogether unfavourable to it, and daily records kept by the officers gave some support to the hypothesis that sleep would be better than under the traditional system. However, a number of difficulties were encountered; these are discussed in relation to the design of future studies of alternative watchkeeping systems.

The Anatomy of School Violence.

ERIC Educational Resources Information Center

Canady, Linda

To stop violence, school professionals should apply both reactive and proactive methods. Schools that focus on the psychological and sociological causes of youth violence have greater chances of success. This document presents the different aspects of school violence in order to bring about a better understanding of the violence and in turn…

School Lunch: A Crisis Overcome.

ERIC Educational Resources Information Center

Reid, Joyce E.

1988-01-01

An Arizona high school district chose to stop the National School Lunch Program in order to eliminate the unpopular components of the required meal pattern. Menu selections were narrowed down to the most requested items; nutritious food was offered at low prices; and fewer students left the campus at lunchtime. (MLF)

Library Networks in the New Millennium: Top Ten Trends. ASCLA Changing Horizons Series.

ERIC Educational Resources Information Center

Laughlin, Sara, Ed.

This book describes the issues that multitype library networks need to know in order to succeed in the new decade, including electronic information, restructuring, distance education, buying clubs and cooperatives, skilled workers, diversifying funding, collaboration, one-stop shopping, accountability, and extraordinary service. The book contains…

Bus transit operational efficiency resulting from passenger boardings at park-and-ride facilities.

DOT National Transportation Integrated Search

2016-08-01

In order to save time and money by not driving to an ultimate destination, some urban commuters drive themselves a few miles to specially designated parking lots built for transit customers and located where trains or buses stop. The focus of this pa...

75 FR 31279 - Blueberry Promotion, Research, and Information Order; Increase Membership

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-03

... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service 7 CFR Part 1218 [Document Number AMS-FV... Programs, AMS, U.S. Department of Agriculture, Stop 0244, 1400 Independence Avenue, SW., Room 0632-S... 2008, the United States exported 13,791 metric tons of fresh highbush blueberries worth over $69...

76 FR 70516 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... Budget for extension and approval. Rule 17Ad-6 requires every registered transfer agent to make and keep... taken to perform transfer agent activities (to ensure compliance with the minimum performance standards... appointment or termination of the transfer agent; (4) stop orders or notices of adverse claims to the...

Radiation damage by light- and heavy-ion bombardment of single-crystal LiNbO₃

DOE PAGES

Huang, Hsu-Cheng; Zhang, Lihua; Malladi, Girish; ...

2015-04-14

In this work, a battery of analytical methods including in situ RBS/C, confocal micro-Raman, TEM/STEM, EDS, AFM, and optical microscopy were used to provide a comparative investigation of light- and heavy-ion radiation damage in single-crystal LiNbO₃. High (~MeV) and low (~100s keV) ion energies, corresponding to different stopping power mechanisms, were used and their associated damage events were observed. In addition, sequential irradiation of both ion species was also performed and their cumulative depth-dependent damage was determined. It was found that the contribution from electronic stopping by high-energy heavy ions gave rise to a lower critical fluence for damage formationmore » than for the case of low-energy irradiation. Such energy-dependent critical fluence of heavy-ion irradiation is two to three orders of magnitude smaller than that for the case of light-ion damage. In addition, materials amorphization and collision cascades were seen for heavy-ion irradiation, while for light ion, crystallinity remained at the highest fluence used in the experiment. The irradiation-induced damage is characterized by the formation of defect clusters, elastic strain, surface deformation, as well as change in elemental composition. In particular, the presence of nanometric-scale damage pockets results in increased RBS/C backscattered signal and the appearance of normally forbidden Raman phonon modes. The location of the highest density of damage is in good agreement with SRIM calculations. (author)« less

Radiation damage by light- and heavy-ion bombardment of single-crystal LiNbO₃

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Hsu-Cheng; Zhang, Lihua; Malladi, Girish

In this work, a battery of analytical methods including in situ RBS/C, confocal micro-Raman, TEM/STEM, EDS, AFM, and optical microscopy were used to provide a comparative investigation of light- and heavy-ion radiation damage in single-crystal LiNbO₃. High (~MeV) and low (~100s keV) ion energies, corresponding to different stopping power mechanisms, were used and their associated damage events were observed. In addition, sequential irradiation of both ion species was also performed and their cumulative depth-dependent damage was determined. It was found that the contribution from electronic stopping by high-energy heavy ions gave rise to a lower critical fluence for damage formationmore » than for the case of low-energy irradiation. Such energy-dependent critical fluence of heavy-ion irradiation is two to three orders of magnitude smaller than that for the case of light-ion damage. In addition, materials amorphization and collision cascades were seen for heavy-ion irradiation, while for light ion, crystallinity remained at the highest fluence used in the experiment. The irradiation-induced damage is characterized by the formation of defect clusters, elastic strain, surface deformation, as well as change in elemental composition. In particular, the presence of nanometric-scale damage pockets results in increased RBS/C backscattered signal and the appearance of normally forbidden Raman phonon modes. The location of the highest density of damage is in good agreement with SRIM calculations. (author)« less

Stopped-flow enzyme assays on a chip using a microfabricated mixer.

PubMed

Burke, Brian J; Regnier, Fred E

2003-04-15

This paper describes a microfabricated enzyme assay system including a micromixer that can be used to perform stopped-flow reactions. Samples and reagents were transported into the system by electroosmotic flow (EOF). Streams of reagents were merged and passed through the 100-pL micromixer in < 1 s. The objective of the work was to perform kinetically based enzyme assays in the stopped-flow mode using a system of roughly 6 nL volume. Beta-galactosidase (beta-Gal) was chosen as a model enzyme for these studies and was used to convert the substrate fluorescein mono-beta-D-galactopyranoside (FMG) into fluorescein. Results obtained with microfabricated systems using the micromixer compared well to those obtained with an external T mixing device. In contrast, assays performed in a microfabricated device by merging two streams and allowing mixing to occur by lateral diffusion did not compare well. Using the microfabricated mixer, Km and kcat values of 75 +/- 13 microM and 44 +/- 3 s(-1) were determined. These values compare well to those obtained with the conventional stopped-flow apparatus for which Km was determined to be 60 +/- 6 microM and kcat was 47 +/- 4 s(-1). Enzyme inhibition assays with phenylethyl-beta-D-thiogalactoside (PETG) were also comparable. It was concluded that kinetically based, stopped-flow enzyme assays can be performed in 60 s or less with a miniaturized system of roughly 6 nL liquid volume when mixing is assisted with the described device.

Working Memory and Response Inhibition as One Integral Phenotype of Adult ADHD? A Behavioral and Imaging Correlational Investigation

ERIC Educational Resources Information Center

Schecklmann, Martin; Ehlis, Ann-Christine; Plichta, Michael M.; Dresler, Thomas; Heine, Monika; Boreatti-Hummer, Andrea; Romanos, Marcel; Jacob, Christian; Pauli, Paul; Fallgatter, Andreas J.

2013-01-01

Objective: It is an open question whether working memory (WM) and response inhibition (RI) constitute one integral phenotype in attention deficit hyperactivity disorder (ADHD). Method: The authors investigated 45 adult ADHD patients and 41 controls comparable for age, gender, intelligence, and education during a letter n-back and a stop-signal…

Stop Occupational Stress (S.O.S.): An Occupational Stress Management Program for Youth Counselors.

ERIC Educational Resources Information Center

Powers, Catherine A.

This practicum was designed to address the declining morale and the elevated job-related stress among the staff of a multiproblem human service agency. The participants were over 90 youth counselors and supervisors. Their educational experience ranged from some college to doctoral-level course work and their work experience varied from .5 years to…

Did Michelangelo (1475-1564) have high-functioning autism?

PubMed

Arshad, Muhammad; Fitzgerald, Michael

2004-05-01

In this paper evidence is presented that Michelangelo met the criteria for Asperger's disorder, or high-functioning autism. The evidence relates to his single-minded work routine, unusual lifestyle, limited interests, poor social and communication skills, and issues of life control. Depression and various medical conditions, including gout, renal colic and renal stones, did not stop his obsessive working habits.

A Policymaker's Guide to No Child Left Behind Reauthorization

ERIC Educational Resources Information Center

American Enterprise Institute for Public Policy Research, 2015

2015-01-01

This spring, Congress is considering the reauthorization of the No Child Left Behind Act. In the 14 years since the law was passed, AEI Education has devoted extensive analysis to how it worked in practice. AEI has distilled their work into a series of brief chapters to provide a one-stop shop for understanding why the law was passed, what went…

Genomic analysis of a heterogeneous Mendelian phenotype: multiple novel alleles for inherited hearing loss in the Palestinian population

PubMed Central

2006-01-01

Recessively inherited phenotypes are frequent in the Palestinian population, as the result of a historical tradition of marriages within extended kindreds, particularly in isolated villages. In order to characterise the genetics of inherited hearing loss in this population, we worked with West Bank schools for the deaf to identify children with prelingual, bilateral, severe to profound hearing loss not attributable to infection, trauma or other known environmental exposure. Of 156 families enrolled, hearing loss in 17 families (11 per cent) was due to mutations in GJB2 (connexin 26), a smaller fraction of GJB2-associated deafness than in other populations. In order to estimate how many different genes might be responsible for hearing loss in this population, we evaluated ten families for linkage to all 36 known human autosomal deafness-related genes, fully sequencing hearing-related genes at any linked sites in informative relatives. Four families harboured four novel alleles of TMPRSS3 (988ΔA = 352stop), otoancorin (1067A >T = D356V) and pendrin (716T > A = V239D and 1001G > T = 346stop). In each family, all affected individuals were homozygous for the critical mutation. Each allele was specific to one or a few families in the cohort; none were widespread. Since epidemiological tests of association of mutations with deafness were not feasible for such rare alleles, we used functional and bioinformatics approaches to evaluate their consequences. In six other families, hearing loss was not linked to any known gene, suggesting that these families harbour novel genes responsible for this phenotype. We conclude that inherited hearing loss is highly heterogeneous in this population, with most extended families acting as genetic isolates in this context. We also conclude that the same genes are responsible for hearing loss in this population as elsewhere, so that gene discovery in these families informs the genetics of hearing loss worldwide. PMID:16460646

When your cancer treatment stops working

MedlinePlus

... facing cancer. Palliative care can help improve your quality of life. You may receive this type of care at ... JL. Caring for patients at the end of life. In: Niederhuber JE, Armitage ... . 5th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ...

78 FR 13756 - Technical Report: Effectiveness of LED Stop Lamps for Reducing Rear-End Crashes: Analyses of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-28

...) using real-world crash data. Previous work on this subject included laboratory experiments that suggest... pairs. Procedural Matters How can I influence NHTSA's thinking on this subject? NHTSA welcomes public...

Stop the War on Coal Act of 2012

THOMAS, 112th Congress

Rep. Johnson, Bill [R-OH-6

2011-11-14

Senate - 11/13/2012 Received in the Senate and Read twice and referred to the Committee on Environment and Public Works. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Mechlorethamine

MedlinePlus

... leukemia (CLL) and chronic myelogenous leukemia (CML); and lung cancer. Mechlorethamine is also used to treat polycythemia vera ( ... effusions (a condition when fluid collects in the lungs or around the heart) ... It works by slowing or stopping the growth of cancer cells in your body.

Colchicine

MedlinePlus

... of age and older. Colchicine is not a pain reliever and cannot be used to treat pain that is not caused by gout or FMF. Colchicine is in a class of medications called anti-gout agents. It works by stopping the natural processes that cause swelling ...

Optimally Stopped Optimization

NASA Astrophysics Data System (ADS)

Vinci, Walter; Lidar, Daniel A.

2016-11-01

We combine the fields of heuristic optimization and optimal stopping. We propose a strategy for benchmarking randomized optimization algorithms that minimizes the expected total cost for obtaining a good solution with an optimal number of calls to the solver. To do so, rather than letting the objective function alone define a cost to be minimized, we introduce a further cost-per-call of the algorithm. We show that this problem can be formulated using optimal stopping theory. The expected cost is a flexible figure of merit for benchmarking probabilistic solvers that can be computed when the optimal solution is not known and that avoids the biases and arbitrariness that affect other measures. The optimal stopping formulation of benchmarking directly leads to a real-time optimal-utilization strategy for probabilistic optimizers with practical impact. We apply our formulation to benchmark simulated annealing on a class of maximum-2-satisfiability (MAX2SAT) problems. We also compare the performance of a D-Wave 2X quantum annealer to the Hamze-Freitas-Selby (HFS) solver, a specialized classical heuristic algorithm designed for low-tree-width graphs. On a set of frustrated-loop instances with planted solutions defined on up to N =1098 variables, the D-Wave device is 2 orders of magnitude faster than the HFS solver, and, modulo known caveats related to suboptimal annealing times, exhibits identical scaling with problem size.

Indecisive Behavior of Amoeba Crossing AN Environmental Barrier

NASA Astrophysics Data System (ADS)

Takagi, S.; Nishiura, Y.; Nakagaki, T.; Ueda, T.; Ueda, K.-I.

2007-07-01

We report here a new kind of behavior that seems to be 'indecisive' in an amoeboid organism, the Physarum plasmodium of true slime mold. The plasmodium migrating in a narrow lane stops moving for a period of time (several hours but the duration differs for each plasmodium) when it encounters the presence of a chemical repellent, quinine. After stopping period, the organism suddenly begins to move again in one of three different ways as the concentration of repellent increases: going through the repulsive place (penetration), splitting into two fronts of going throught it and turning (splitting) and turning back (rebound). In relation to the physiological mechanism for tip migration in the plasmodium, we found that the frontal tip is capable of moving further although the tip is divided from a main body of organism. This means that a motive force of front locomotion is produced by a local process at the tip. Based on this finding, a mathematical model for front locomotion is considered in order to understand the dynamics for both the long period of stopping and three kinds of behavior. A model based on reaction-diffusion equations succeeds to reproduce the experimental observation. The origin of long-time stopping and three different outputs may be reduced to the hidden instabilities of internal dynamics of the pulse, which may be a skeleton structure extracted from much more complex dynamics imbedded in the Physarum plasmodium.

In vitro and field studies on the contact and fumigant toxicity of a neem-product (Mite-Stop) against the developmental stages of the poultry red mite Dermanyssus gallinae.

PubMed

Locher, Nina; Al-Rasheid, Khaled A S; Abdel-Ghaffar, Fathy; Mehlhorn, Heinz

2010-07-01

The acaricidal activity of the neem product MiteStop was investigated for its potential use as a botanical acaricide for the control of the poultry red mite Dermanyssus gallinae. This neem product is a special formulation of an extract of the seeds of the neem tree Azadirachta indica A. Juss. The efficacy was tested under laboratory conditions as well as in poultry houses. Four different methods of application were used in a filter paper bioassay to evaluate contact and vapour phase toxicity tests. The neem product proved to be already active in very small doses. In order to investigate the efficacy under field conditions, a poultry house was sprayed twice within a 7-day period using 1:33 and 1:50 diluted MiteStop. Cardboard traps were used to assess the mite population before, during and after the treatment. The mite population could be reduced by 89%. In a second poultry house, the spraying of defined areas with a 1:30, 1:33 or 1:50 dilution of the acaricide proved to be highly efficacious against all mite stages. Three other field trials proved that MiteStop is highly active against the red poultry mite. The most efficient dilution is 1:33 with tap water and spraying two or three times at intervals of 7 days.

Measurement and Reliability of Response Inhibition

PubMed Central

Congdon, Eliza; Mumford, Jeanette A.; Cohen, Jessica R.; Galvan, Adriana; Canli, Turhan; Poldrack, Russell A.

2012-01-01

Response inhibition plays a critical role in adaptive functioning and can be assessed with the Stop-signal task, which requires participants to suppress prepotent motor responses. Evidence suggests that this ability to inhibit a prepotent motor response (reflected as Stop-signal reaction time (SSRT)) is a quantitative and heritable measure of interindividual variation in brain function. Although attention has been given to the optimal method of SSRT estimation, and initial evidence exists in support of its reliability, there is still variability in how Stop-signal task data are treated across samples. In order to examine this issue, we pooled data across three separate studies and examined the influence of multiple SSRT calculation methods and outlier calling on reliability (using Intra-class correlation). Our results suggest that an approach which uses the average of all available sessions, all trials of each session, and excludes outliers based on predetermined lenient criteria yields reliable SSRT estimates, while not excluding too many participants. Our findings further support the reliability of SSRT, which is commonly used as an index of inhibitory control, and provide support for its continued use as a neurocognitive phenotype. PMID:22363308

Observations on effects of a neem seed extract (MiteStop®) on biting lice (mallophages) and bloodsucking insects parasitizing horses.

PubMed

Al-Quraishy, Saleh; Abdel-Ghaffar, Fathy; Al-Rasheid, Khaled A S; Mehlhorn, Julia; Mehlhorn, Heinz

2012-01-01

The hair of 300 horses belonging to short hair and long hair races had been routinely treated during the last 3 years with a neem seed extract (MiteStop®) in order to kill mallophages (e.g., specimens of the genus Werneckiella). It was found that in all cases, a hidden infestation with these biting lice had existed, which became visible when the product (diluted 1:20 with tap water) was brushed onto the hair. The mallophages left the body surface and became visible as a fine "wooly looking" layer at the tips of the hair. Furthermore, this treatment stopped the forming of dandruff of the skin of the horses, which, in case of heavy mallophage infestations, had looked like being powdered. Another interesting result of the treatment was reported by the riders. They described that the product had a considerable repellent effect on bloodsucking tabanids, mosquitoes, ceratopogonids, simuliids, as well as on licking flies. This repellency effect was noted to last for up to 7 days if the horses were not washed.

A New Image Processing and GIS Package

NASA Technical Reports Server (NTRS)

Rickman, D.; Luvall, J. C.; Cheng, T.

1998-01-01

The image processing and GIS package ELAS was developed during the 1980's by NASA. It proved to be a popular, influential and powerful in the manipulation of digital imagery. Before the advent of PC's it was used by hundreds of institutions, mostly schools. It is the unquestioned, direct progenitor or two commercial GIS remote sensing packages, ERDAS and MapX and influenced others, such as PCI. Its power was demonstrated by its use for work far beyond its original purpose, having worked several different types of medical imagery, photomicrographs of rock, images of turtle flippers and numerous other esoteric imagery. Although development largely stopped in the early 1990's the package still offers as much or more power and flexibility than any other roughly comparable package, public or commercial. It is a huge body or code, representing more than a decade of work by full time, professional programmers. The current versions all have several deficiencies compared to current software standards and usage, notably its strictly command line interface. In order to support their research needs the authors are in the process of fundamentally changing ELAS, and in the process greatly increasing its power, utility, and ease of use. The new software is called ELAS II. This paper discusses the design of ELAS II.

D-term contributions and CEDM constraints in E6 × SU(2)F × U(1)A SUSY GUT model

NASA Astrophysics Data System (ADS)

Shigekami, Yoshihiro

2017-11-01

We focus on E6 × SU(2)F × U(1)A supersymmetric (SUSY) grand unified theory (GUT) model. In this model, realistic Yukawa hierarchies and mixings are realized by introducing all allowed interactions with 𝓞(1) coefficients. Moreover, we can take stop mass is smaller than the other sfermion masses. This type of spectrum called by natural SUSY type sfermion mass spectrum can suppress the SUSY contributions to flavor changing neutral current (FCNC) and stabilize weak scale at the same time. However, light stop predicts large up quark CEDM and stop contributions are not decoupled. Since there is Kobayashi-Maskawa phase, stop contributions to the up quark CEDM is severely constrained even if all SUSY breaking parameters and Higgsino mass parameter μ are real. In this model, real up Yukawa couplings are realized at the GUT scale because of spontaneous CP violation. Therefore CEDM bounds are satisfied, although up Yukawa couplings are complex at the SUSY scale through the renormalization equation group effects. We calculated the CEDMs and found that EDM constraints can be satisfied even if stop mass is 𝓞(1) TeV. In addition, we investigate the size of D-terms in this model. Since these D-term contributions is flavor dependent, the degeneracy of sfermion mass spectrum is destroyed and the size of D-term is strongly constrained by FCNCs when SUSY breaking scale is the weak scale. However, SUSY breaking scale is larger than 1 TeV in order to obtain 125 GeV Higgs mass, and therefore sizable D-term contribution is allowed. Furthermore, we obtained the non-trivial prediction for the difference of squared sfermion mass.

Effects of first formant onset frequency on [-voice] judgments result from auditory processes not specific to humans.

PubMed

Kluender, K R; Lotto, A J

1994-02-01

When F1-onset frequency is lower, longer F1 cut-back (VOT) is required for human listeners to perceive synthesized stop consonants as voiceless. K. R. Kluender [J. Acoust. Soc. Am. 90, 83-96 (1991)] found comparable effects of F1-onset frequency on the "labeling" of stop consonants by Japanese quail (coturnix coturnix japonica) trained to distinguish stop consonants varying in F1 cut-back. In that study, CVs were synthesized with natural-like rising F1 transitions, and endpoint training stimuli differed in the onset frequency of F1 because a longer cut-back resulted in a higher F1 onset. In order to assess whether earlier results were due to auditory predispositions or due to animals having learned the natural covariance between F1 cut-back and F1-onset frequency, the present experiment was conducted with synthetic continua having either a relatively low (375 Hz) or high (750 Hz) constant-frequency F1. Six birds were trained to respond differentially to endpoint stimuli from three series of synthesized /CV/s varying in duration of F1 cut-back. Second and third formant transitions were appropriate for labial, alveolar, or velar stops. Despite the fact that there was no opportunity for animal subjects to use experienced covariation of F1-onset frequency and F1 cut-back, quail typically exhibited shorter labeling boundaries (more voiceless stops) for intermediate stimuli of the continua when F1 frequency was higher. Responses by human subjects listening to the same stimuli were also collected. Results lend support to the earlier conclusion that part or all of the effect of F1 onset frequency on perception of voicing may be adequately explained by general auditory processes.(ABSTRACT TRUNCATED AT 250 WORDS)

The United States Remains Unprepared for Oil Import Disruptions. Volume I. Summary: Includes Conclusions and Recommendations.

DTIC Science & Technology

1981-09-29

The Administration’s decision to stop funding rationing planning means it will not be available for emergency use. Authority for gaso- line rationing ...them. It will be a very narrow system in order to minimize adverse effects on market decision - making and efficiency. However, until such a system is...It will be a very narrow system in order to minimize adverse effects on market decision - making and efficiency. However, until such a system is

The Quantal Larynx: The Stable Regions of Laryngeal Biomechanics and Implications for Speech Production.

PubMed

Moisik, Scott Reid; Gick, Bryan

2017-03-01

Recent proposals suggest that (a) the high dimensionality of speech motor control may be reduced via modular neuromuscular organization that takes advantage of intrinsic biomechanical regions of stability and (b) computational modeling provides a means to study whether and how such modularization works. In this study, the focus is on the larynx, a structure that is fundamental to speech production because of its role in phonation and numerous articulatory functions. A 3-dimensional model of the larynx was created using the ArtiSynth platform (http://www.artisynth.org). This model was used to simulate laryngeal articulatory states, including inspiration, glottal fricative, modal prephonation, plain glottal stop, vocal-ventricular stop, and aryepiglotto-epiglottal stop and fricative. Speech-relevant laryngeal biomechanics is rich with "quantal" or highly stable regions within muscle activation space. Quantal laryngeal biomechanics complement a modular view of speech control and have implications for the articulatory-biomechanical grounding of numerous phonetic and phonological phenomena.

Current challenges in tobacco control.

PubMed

Slama, K

2004-10-01

Tobacco is the world's biggest preventable killer, but the circumstances of its history, the power and influence of its commerce and the nature of addiction make it a very difficult public health issue. Determinants of smoking are both individual and environmental. Genetics and environment influence to varying degrees all of the steps in a smoker's career. Persistence of use, degree of addiction to nicotine and difficulty in stopping are influenced by inherited traits and nicotine susceptibility, whereas the social environment and the individual's cognitions are the key factors in starting smoking and successfully stopping smoking. The tools available to tobacco control include influencing the social and cultural norms concerning tobacco; legislative and regulatory measures to protect the population and to limit tobacco industry marketing tactics, now encapsulated in the Framework Convention on Tobacco Control; and programmes to enhance the chance of not starting and successfully stopping. Strategies for tobacco control must work at both societal and individual levels, and directions are being taken that include genetic, pharmacological, behavioural, socio-cultural and international approaches.

Event-related potentials for post-error and post-conflict slowing.

PubMed

Chang, Andrew; Chen, Chien-Chung; Li, Hsin-Hung; Li, Chiang-Shan R

2014-01-01

In a reaction time task, people typically slow down following an error or conflict, each called post-error slowing (PES) and post-conflict slowing (PCS). Despite many studies of the cognitive mechanisms, the neural responses of PES and PCS continue to be debated. In this study, we combined high-density array EEG and a stop-signal task to examine event-related potentials of PES and PCS in sixteen young adult participants. The results showed that the amplitude of N2 is greater during PES but not PCS. In contrast, the peak latency of N2 is longer for PCS but not PES. Furthermore, error-positivity (Pe) but not error-related negativity (ERN) was greater in the stop error trials preceding PES than non-PES trials, suggesting that PES is related to participants' awareness of the error. Together, these findings extend earlier work of cognitive control by specifying the neural correlates of PES and PCS in the stop signal task.

Inhibitory motor control based on complex stopping goals relies on the same brain network as simple stopping

PubMed Central

Wessel, Jan R.; Aron, Adam R.

2014-01-01

Much research has modeled action-stopping using the stop-signal task (SST), in which an impending response has to be stopped when an explicit stop-signal occurs. A limitation of the SST is that real-world action-stopping rarely involves explicit stop-signals. Instead, the stopping-system engages when environmental features match more complex stopping goals. For example, when stepping into the street, one monitors path, velocity, size, and types of objects; and only stops if there is a vehicle approaching. Here, we developed a task in which participants compared the visual features of a multidimensional go-stimulus to a complex stopping-template, and stopped their go-response if all features matched the template. We used independent component analysis of EEG data to show that the same motor inhibition brain network that explains action-stopping in the SST also implements motor inhibition in the complex-stopping task. Furthermore, we found that partial feature overlap between go-stimulus and stopping-template lead to motor slowing, which also corresponded with greater stopping-network activity. This shows that the same brain system for action-stopping to explicit stop-signals is recruited to slow or stop behavior when stimuli match a complex stopping goal. The results imply a generalizability of the brain’s network for simple action-stopping to more ecologically valid scenarios. PMID:25270603

Corrigendum to "Misconceptions impairing the validity of the stopping power tables in the SRIM library and suggestions for doing better in the future" [Nucl. Instr. Meth. B 380 (2016) 57-70

NASA Astrophysics Data System (ADS)

Wittmaack, Klaus

2016-12-01

In the Introduction of the above paper I made joint reference to four previous publications containing tables of electronic stopping cross sections. However, not all of the reports are similar in nature, a fact that I missed to clarify; the error also escaped attention of the reviewer. The first three cited sets of tables were prepared in analogy to the SRIM library, using a rather limited number of available experimental data for extrapolation based on an approach that I showed to have no justification. This main subject of my paper is not repeated here. The fourth reference, the ICRU Report 73 [1] is completely different in character. The first part comprises a very valuable overview on stopping power theory as well as on methods to measure energy losses. The second part contains electronic stopping cross sections predicted by the binary-collision code PASS developed by Sigmund and Schinner [2]. The early application of the code [1] was limited to projectile numbers Z1 ⩽ 18 (Ar) and reduced energies E/M1 ⩾ 25 keV/u. More recent work suggests that there is room for a wider range of applications of the PASS code [3].

An empirical approach to the stopping power of solids and gases for ions from 3Li to 18Ar - Part II

NASA Astrophysics Data System (ADS)

Paul, Helmut; Schinner, Andreas

2002-10-01

This paper is a continuation of the work presented in Nucl. Instr. and Meth. Phys. Res. B 179 (2001) 299. Its aim is to produce a table of stopping powers by fitting empirical stopping values. Our database has been increased and we use a better fit function. As before, we treat solid and gaseous targets separately, but we now obtain results also for H 2 and He targets. Using an improved version of our program MSTAR, we can calculate the stopping power for any ion (3⩽ Z1⩽18) at specific energies from 0.001 to 1000 MeV/nucleon and for any element, mixture or compound contained in ICRU Report 49. MSTAR is available in the internet; it can be used as stand alone or built as a subroutine into other programs. Using a statistical program for comparing our fits with the experimental data, we find that MSTAR represents the data within 2% at high energy and within up to 20% (25% for gases) at the lowest energies. Fitting errors are 40-110% larger than experimental errors given by the authors. For some gas targets, MSTAR describes the data better than Ziegler's program TRIM.

Transforming information from silicon testing and design characterization into numerical data sets for yield learning

NASA Astrophysics Data System (ADS)

Yang, Thomas; Shen, Yang; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh

2017-03-01

Silicon testing results are regularly collected for a particular lot of wafers to study yield loss from test result diagnostics. Product engineers will analyze the diagnostic results and perform a number of physical failure analyses to detect systematic defects which cause yield loss for these sets of wafers in order to feedback the information to process engineers for process improvements. Most of time, the systematic defects that are detected are major issues or just one of the causes for the overall yield loss. This paper will present a working flow for using design analysis techniques combined with diagnostic methods to systematically transform silicon testing information into physical layout information. A new set of the testing results are received from a new lot of wafers for the same product. We can then correlate all the diagnostic results from different periods of time to check which blocks or nets have been highlighted or stop occurring on the failure reports in order to monitor process changes which impact the yield. The design characteristic analysis flow is also implemented to find 1) the block connections on a design that have failed electrical test or 2) frequently used cells that been highlighted multiple times.

Sexual Violence Prevention

ERIC Educational Resources Information Center

Lee, David S.; Guy, Lydia; Perry, Brad; Sniffen, Chad Keoni; Mixson, Stacy Alamo

2007-01-01

This article reviews approaches for developing comprehensive strategies that stop violence before initial perpetration occurs. Using feminist theory and public health perspectives as its foundation, the use of educational sessions, community mobilization, social norms, social marketing, and policy work are all explored. (Contains 1 table.)

Sodium Variable Conductance Heat Pipe for Radioisotope Stirling Systems

NASA Technical Reports Server (NTRS)

Tarau, Calin; Anderson, William G.; Walker, Kara

2009-01-01

In a Stirling radioisotope system, heat must continually be removed from the General Purpose Heat Source (GPHS) modules to maintain the modules and surrounding insulation at acceptable temperatures. Normally, the Stirling convertor provides this cooling. If the converter stops in the current system, the insulation is designed to spoil, preventing damage to the GPHS, and also ending the mission. An alkali-metal Variable Conductance Heat Pipe (VCHP) has been designed to allow multiple stops and restarts of the Stirling convertor in an Advanced Stirling Radioisotope Generator (ASRG). When the Stirling convertor is turned off, the VCHP will activate when the temperatures rises 30 C above the setpoint temperature. A prototype VCHP with sodium as the working fluid was fabricated and tested in both gravity aided and against gravity conditions for a nominal heater head temperature of 790 C. The results show very good agreement with the predictions and validate the model. The gas front was located at the exit of the reservoir when heater head temperature was 790 C while cooling was ON, simulating an operating Advanced Stirling Converter (ASC). When cooling stopped, the temperature increased by 30 C, allowing the gas front to move past the radiator, which transferred the heat to the case. After resuming the cooling flow, the front returned at the initial location turning OFF the VCHP. The against gravity working conditions showed a colder reservoir and faster transients.

78 FR 38699 - Decision and Order Granting a Waiver to GE Appliances From the Department of Energy Residential...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-27

... electric refrigerator and refrigerator-freezer test procedures for determining the energy consumption of... using an alternate test procedure that takes this technology into account when measuring energy.... Bryan Berringer, U.S. Department of Energy, Building Technologies Program, Mail Stop EE-2J, Forrestal...

78 FR 38696 - Decision and Order Granting a Waiver to GE Appliances From the Department of Energy Residential...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-27

... electric refrigerator and refrigerator-freezer test procedures for determining the energy consumption of... test procedure that takes this technology into account when measuring energy consumption. DATES: This.... Department of Energy, Building Technologies Program, Mail Stop EE-2J, Forrestal Building, 1000 Independence...

Stop Misusing Higher Education-Specific Price Indices

ERIC Educational Resources Information Center

Gillen, Andrew; Robe, Jonathan

2011-01-01

In order to compare the price of things over time, it is necessary to use a price index to adjust for inflation. The Higher Education Price Index (HEPI) and the Higher Education Cost Adjustment (HECA) were designed to more accurately account for the spending patterns of colleges and universities. However, there are some methodological problems…

Tough Talk as an Antidote to Bullying

ERIC Educational Resources Information Center

Miller, Donna L.

2012-01-01

Locker rooms, hallways, and other school locales not populated by teachers are often places where bullies emerge, places where the pecking order is established by targeting any difference or idiosyncrasy. Given that bullying happens mostly in the presence of other youth and often stops when objections are raised, there is growing evidence that…

In Order to Save the World for Human Habitation, We Must Stop Teaching Economics.

ERIC Educational Resources Information Center

Miller, Raymond C.

1993-01-01

Reviews 11 normative principles of capitalist economics. Contends that these principles form the basis for much of economics education in the United States and Western society. Argues that to save the world from massive environmental degradation, economics education must be completely restructured to focus on ecological concerns. (CFR)

The Old Order Changeth.

ERIC Educational Resources Information Center

Stokes, Anne M.

That the English language has changed greatly over the centuries is an accepted fact; the fact that the movement hasn't stopped should also be accepted. Examples of analogic changes which are taking place in syntax and morphology illustrate the state of flux of English. However, many teachers of English still believe that it is their duty to guard…

Technology Insertion-Engineering Services Process Characterization Task Order No. 1 (Block II). Database Documentation Book for OC-ALC MABPAB

DTIC Science & Technology

1989-09-11

1 -33 , 057T6-028 . SPACER. . . ............. ......... .. .. 2 -34 1= 063 . BEARING, Needle (60380) (BAC- BIOB -317) ... ..... . . 1 -35 60... BIOB -317).......... -35 69-10330-6 . STOP (Optional 69-10330-4).... ............ • • • (ATTACHING PARTS) -36 NAS679A3W . NUT

Stop Illegal Trafficking in Firearms Act of 2013

THOMAS, 113th Congress

Sen. Leahy, Patrick J. [D-VT

2013-01-22

Senate - 04/05/2013 By Senator Leahy from Committee on the Judiciary filed written report under authority of the order of the Senate of 03/23/2013. Report No. 113-9. Additional and Minority views filed. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Stop Disease: Diapering Procedures = Alto a las Enfermedades: Procedimientos para Cambiar Panales.

ERIC Educational Resources Information Center

California Child Care Health Program, Oakland.

In order to prevent the occurrence and spread of disease in California child care programs, this set of laminated procedure pages, in English and Spanish versions, details infant and child care procedures for safe diapering. The document delineates important rules about diapering, gives directions for making a disinfecting solution, and provides…

20 CFR 266.14 - When representative payment will be stopped.

Code of Federal Regulations, 2011 CFR

2011-04-01

... receiving representative payment shows the Board that he or she is mentally and physically able to manage or... able to manage or direct the management of his or her funds; (b) A certified copy of a court order... evidence which establishes the annuitant's ability to manage or direct the management of benefits. ...

20 CFR 266.14 - When representative payment will be stopped.

Code of Federal Regulations, 2010 CFR

2010-04-01

... receiving representative payment shows the Board that he or she is mentally and physically able to manage or... able to manage or direct the management of his or her funds; (b) A certified copy of a court order... evidence which establishes the annuitant's ability to manage or direct the management of benefits. ...

20 CFR 266.14 - When representative payment will be stopped.

Code of Federal Regulations, 2014 CFR

2014-04-01

... receiving representative payment shows the Board that he or she is mentally and physically able to manage or... able to manage or direct the management of his or her funds; (b) A certified copy of a court order... evidence which establishes the annuitant's ability to manage or direct the management of benefits. ...

20 CFR 266.14 - When representative payment will be stopped.

Code of Federal Regulations, 2013 CFR

2013-04-01

... receiving representative payment shows the Board that he or she is mentally and physically able to manage or... able to manage or direct the management of his or her funds; (b) A certified copy of a court order... evidence which establishes the annuitant's ability to manage or direct the management of benefits. ...

20 CFR 266.14 - When representative payment will be stopped.

Code of Federal Regulations, 2012 CFR

2012-04-01

... receiving representative payment shows the Board that he or she is mentally and physically able to manage or... able to manage or direct the management of his or her funds; (b) A certified copy of a court order... evidence which establishes the annuitant's ability to manage or direct the management of benefits. ...

Changes in Wives' Employment when Husbands Stop Working: A Recession-Prosperity Comparison

ERIC Educational Resources Information Center

Mattingly, Marybeth J.; Smith, Kristin E.

2010-01-01

American families are experiencing the effects of the "Great Recession." Most of the job losses are accruing to men, so families may find it strategic for wives to enter the labor force, or increase their work hours. We consider this possibility using the May 2008 and 2009 Current Population Survey, and compare findings to May 2004 and 2005 data,…

On the Implications of Neuroscience Research for Science Teaching and Learning: Are There Any?

ERIC Educational Resources Information Center

Lawson, Anton E.

2006-01-01

What, if anything, do teachers need to know about how the brain works to improve teaching and learning? After all, a plumber needs to know how to stop leaks--not the molecular structure of water. And one can learn how to use a computer without knowing how a computer chip works. Likewise, teachers need to know how to help students develop…

Women, Work and Wages: How To Get the Job and Pay You Want. Facts on Working Women.

ERIC Educational Resources Information Center

Women's Bureau (DOL), Washington, DC.

This guide is designed to provide women job seekers with tools to help them obtain the job and salary they want and deserve. It begins with information about the labor market in general. These sources of information about jobs are described: networking; private employers; one-stop career centers; America's Job Bank; federal, state, and local…

Muon polarization in the MEG experiment: predictions and measurements

DOE PAGES

Baldini, A. M.; Bao, Y.; Baracchini, E.; ...

2016-04-22

The MEG experiment makes use of one of the world’s most intense low energy muon beams, in order to search for the lepton flavour violating process μ +→e +γ. We determined the residual beam polarization at the thin stopping target, by measuring the asymmetry of the angular distribution of Michel decay positrons as a function of energy. The initial muon beam polarization at the production is predicted to be P μ=-1 by the Standard Model (SM) with massless neutrinos. We estimated our residual muon polarization to be P μ= -0.86 ± 0.02 (stat)more » $$+0.05\\atop{-0.06}$$ (syst) at the stopping target, which is consistent with the SM predictions when the depolarizing effects occurring during the muon production, propagation and moderation in the target are taken into account. The knowledge of beam polarization is of fundamental importance in order to model the background of our μ +→e +γ search induced by the muon radiative decay: μ +→e +$$\\bar{v}$$ μν eγ.« less

Energy spectra of massive two-body decay products and mass measurement

DOE PAGES

Agashe, Kaustubh; Franceschini, Roberto; Hong, Sungwoo; ...

2016-04-26

Here, we have recently established a new method for measuring the mass of unstable particles produced at hadron colliders based on the analysis of the energy distribution of a massless product from their two-body decays. The central ingredient of our proposal is the remarkable result that, for an unpolarized decaying particle, the location of the peak in the energy distribution of the observed decay product is identical to the (fixed) value of the energy that this particle would have in the rest-frame of the decaying particle, which, in turn, is a simple function of the involved masses. In addition, wemore » utilized the property that this energy distribution is symmetric around the location of peak when energy is plotted on a logarithmic scale. The general strategy was demonstrated in several specific cases, including both beyond the standard model particles, as well as for the top quark. In the present work, we generalize this method to the case of a massive decay product from a two-body decay; this procedure is far from trivial because (in general) both the above-mentioned properties are no longer valid. Nonetheless, we propose a suitably modified parametrization of the energy distribution that was used successfully for the massless case, which can deal with the massive case as well. We test this parametrization on concrete examples of energy spectra of Z bosons from the decay of a heavier supersymmetric partner of top quark (stop) into a Z boson and a lighter stop. After establishing the accuracy of this parametrization, we study a realistic application for the same process, but now including dominant backgrounds and using foreseeable statistics at LHC14, in order to determine the performance of this method for an actual mass measurement. The upshot of our present and previous work is that, in spite of energy being a Lorentz-variant quantity, its distribution emerges as a powerful tool for mass measurement at hadron colliders.« less

Resonant Capture and Tidal Evolution in Circumbinary Systems: Testing the Case of Kepler-38

NASA Astrophysics Data System (ADS)

Zoppetti, F. A.; Beaugé, C.; Leiva, A. M.

2018-04-01

Circumbinary planets are thought to form far from the central binary and migrate inwards by interactions with the circumbinary disk, ultimately stopping near their present location either by a planetary trap near the disk inner edge or by resonance capture. Here, we analyze the second possibility, presenting a detailed numerical study on the capture process, resonant dynamics and tidal evolution of circumbinary planets in high-order mean-motion resonances (MMRs). Planetary migration was modeled as an external acceleration in an N-body code, while tidal effects were incorporated with a weak-friction equilibrium tide model. As a working example we chose Kepler-38, a highly evolved system with a planet in the vicinity of the 5/1 MMR. Our simulations show that resonance capture is a high-probability event under a large range of system parameters, although several different resonant configuration are possible. We identified three possible outcomes: aligned librations, anti-aligned librations and chaotic solutions. All were found to be dynamically stable, even after the dissipation of the disk, for time-spans of the order of the system's age. We found that while tidal evolution decreases the binary's separation, the semimajor axis of the planet is driven outwards. Although the net effect is a secular increase in the mean-motion ratio, the system requires a planetary tidal parameter of the order of unity to reproduce the observed orbital configuration. The results presented here open an interesting outlook into the complex dynamics of high-order resonances in circumbinary systems.

Resonant capture and tidal evolution in circumbinary systems: testing the case of Kepler-38

NASA Astrophysics Data System (ADS)

Zoppetti, F. A.; Beaugé, C.; Leiva, A. M.

2018-07-01

Circumbinary planets are thought to form far from the central binary and migrate inwards by interactions with the circumbinary disc, ultimately stopping near their present location either by a planetary trap near the disc inner edge or by resonance capture. Here, we analyse the second possibility, presenting a detailed numerical study on the capture process, resonant dynamics, and tidal evolution of circumbinary planets in high-order mean-motion resonances (MMRs). Planetary migration was modelled as an external acceleration in an N-body code, while tidal effects were incorporated with a weak-friction equilibrium tide model. As a working example, we chose Kepler-38, a highly evolved system with a planet in the vicinity of the 5/1 MMR. Our simulations show that resonance capture is a high-probability event under a large range of system parameters, although several different resonant configuration are possible. We identified three possible outcomes: aligned librations, anti-aligned librations, and chaotic solutions. All were found to be dynamically stable, even after the dissipation of the disc, for time spans of the order of the system's age. We found that while tidal evolution decreases the binary's separation, the semimajor axis of the planet is driven outwards. Although the net effect is a secular increase in the mean-motion ratio, the system requires a planetary tidal parameter of the order of unity to reproduce the observed orbital configuration. The results presented here open an interesting outlook into the complex dynamics of high-order resonances in circumbinary systems.

Duration of breast milk expression among working mothers enrolled in an employer-sponsored lactation program.

PubMed

Ortiz, Joan; McGilligan, Kathryn; Kelly, Patricia

2004-01-01

Maternal employment has been one of the greatest barriers to breastfeeding. Women are increasingly solving this problem by expressing milk at work and taking it home to their infants. The objective was to determine duration of breast milk expression among working mothers enrolled in an employer-sponsored lactation program. Retrospective reviews were conducted on the lactation records of 462 women employed by 5 corporations in order to describe and characterize their experiences. The lactation program included the employees' choice of (a) a class on the benefits of breastfeeding; (b) services of a certified lactation consultant (CLC); and (c) private room in the workplace with equipment for pumping. Breastfeeding was initiated by 97.5% of the participants, with 57.8% continuing for at least 6 months. Of the 435 (94.2%) who returned to work after giving birth, 343 (78.9%) attempted pumping milk at work, and 336 (98%) were successful. They expressed milk in the workplace for a mean of 6.3 months (SD = 3.9, range 2 weeks to 21 months). The mean age of infants when the mothers stopped pumping at work was 9.1 months (SD = 4.1, range 1.9 to 25 months). Most of the women who pumped their milk at work were working full time (84.2%). The mean postnatal maternity leave was 2.8 months. The proportion of women who chose to pump at work was higher among women who were salaried than among those who were paid hourly wages (p < 0.01). Company-sponsored lactation programs can enable employed mothers to provide breast milk for their infants as long as they wish, thus helping the nation attain the Healthy People 2010 goals of 50% of mothers breastfeeding until their infants are 6-months-old.

The global polio eradication initiative Stop Transmission of Polio (STOP) program - 1999-2013.

PubMed

2013-06-21

In 1988, the Global Polio Eradication Initiative (GPEI) was established through a partnership between the World Health Organization (WHO), Rotary International, CDC, and the United Nations Children's Fund (UNICEF). By 2012, the annual incidence of polio had decreased by >99%, compared with 1988, and the number of countries in which wild poliovirus (WPV) circulation has never been interrupted was reduced to three: Afghanistan, Nigeria, and Pakistan. However, because of the persistence of endemic WPV transmission and recurring outbreaks in polio-free countries after the original polio eradication target date of 2000, the World Health Assembly in 2012 declared the completion of polio eradication a programmatic emergency. A key component of GPEI is the Stop Transmission of Polio (STOP) program, which was developed and initiated by CDC with WHO in 1999 to mobilize additional human resources and technical assistance for countries affected by WPV transmission. During 1999-2013, 1,563 volunteers were identified, trained, and deployed for 2,221 assignments in 69 countries. The number of volunteers increased from 90-120 per year during 1999-2011 to 287 in 2012 and 378 in 2013, and the number of volunteer person-months in the field per year increased from 273 in 1999 to 1,456 in 2012. The STOP program has aided GPEI by strengthening the capacity of country-level immunization programs and by allowing a large cohort of volunteers to gain valuable field experience that prepares them well for subsequent work as staff members of WHO, UNICEF, and other public health agencies.

Material discrimination using scattering and stopping of cosmic ray muons and electrons: Differentiating heavier from lighter metals as well as low-atomic weight materials

NASA Astrophysics Data System (ADS)

Blanpied, Gary; Kumar, Sankaran; Dorroh, Dustin; Morgan, Craig; Blanpied, Isabelle; Sossong, Michael; McKenney, Shawn; Nelson, Beth

2015-06-01

Reported is a new method to apply cosmic-ray tomography in a manner that can detect and characterize not only dense assemblages of heavy nuclei (like Special Nuclear Materials, SNM) but also assemblages of medium- and light-atomic-mass materials (such as metal parts, conventional explosives, and organic materials). Characterization may enable discrimination between permitted contents in commerce and contraband (explosives, illegal drugs, and the like). Our Multi-Mode Passive Detection System (MMPDS) relies primarily on the muon component of cosmic rays to interrogate Volumes of Interest (VOI). Muons, highly energetic and massive, pass essentially un-scattered through materials of light atomic mass and are only weakly scattered by conventional metals used in industry. Substantial scattering and absorption only occur when muons encounter sufficient thicknesses of heavy elements characteristic of lead and SNM. Electrons are appreciably scattered by light elements and stopped by sufficient thicknesses of materials containing medium-atomic-mass elements (mostly metals). Data include simulations based upon GEANT and measurements in the HMT (Half Muon Tracker) detector in Poway, CA and a package scanner in both Poway and Socorro NM. A key aspect of the present work is development of a useful parameter, designated the "stopping power" of a sample. The low-density regime, comprising organic materials up to aluminum, is characterized using very little scattering but a strong variation in stopping power. The medium-to-high density regime shows a larger variation in scattering than in stopping power. The detection of emitted gamma rays is another useful signature of some materials.

Guidelines for bus transit stops in highway construction work zones.

DOT National Transportation Integrated Search

2014-12-01

Fixed route transit systems provide a valuable transportation service for many of our citizens. As users depend on : bus transit to access to the essentials of life, maintaining transit service is a critical issue. Given the extent of : nationwide bu...

Coughing (For Parents)

MedlinePlus

... usually don't prescribe antibiotics because these only work against bacteria. Unless a cough won't let your child sleep, cough medicines are not needed. They might help a child stop coughing, but they don't treat the cause of the cough. If you do use an ...

TU-FG-BRB-03: Basis Vector Model Based Method for Proton Stopping Power Estimation From Experimental Dual Energy CT Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, S; Politte, D; O’Sullivan, J

2016-06-15

Purpose: This work aims at reducing the uncertainty in proton stopping power (SP) estimation by a novel combination of a linear, separable basis vector model (BVM) for stopping power calculation (Med Phys 43:600) and a statistical, model-based dual-energy CT (DECT) image reconstruction algorithm (TMI 35:685). The method was applied to experimental data. Methods: BVM assumes the photon attenuation coefficients, electron densities, and mean excitation energies (I-values) of unknown materials can be approximated by a combination of the corresponding quantities of two reference materials. The DECT projection data for a phantom with 5 different known materials was collected on a Philipsmore » Brilliance scanner using two scans at 90 kVp and 140 kVp. The line integral alternating minimization (LIAM) algorithm was used to recover the two BVM coefficient images using the measured source spectra. The proton stopping powers are then estimated from the Bethe-Bloch equation using electron densities and I-values derived from the BVM coefficients. The proton stopping powers and proton ranges for the phantom materials estimated via our BVM based DECT method are compared to ICRU reference values and a post-processing DECT analysis (Yang PMB 55:1343) applied to vendorreconstructed images using the Torikoshi parametric fit model (tPFM). Results: For the phantom materials, the average stopping power estimations for 175 MeV protons derived from our method are within 1% of the ICRU reference values (except for Teflon with a 1.48% error), with an average standard deviation of 0.46% over pixels. The resultant proton ranges agree with the reference values within 2 mm. Conclusion: Our principled DECT iterative reconstruction algorithm, incorporating optimal beam hardening and scatter corrections, in conjunction with a simple linear BVM model, achieves more accurate and robust proton stopping power maps than the post-processing, nonlinear tPFM based DECT analysis applied to conventional reconstructions of low and high energy scans. Funding Support: NIH R01CA 75371; NCI grant R01 CA 149305.« less

Computational Analysis and Low-Scale Constitutive Expression of Laccases Synthetic Genes GlLCC1 from Ganoderma lucidum and POXA 1B from Pleurotus ostreatus in Pichia pastoris

PubMed Central

Reyes-Guzmán, Edwin Alfredo; Poutou-Piñales, Raúl A.; Reyes-Montaño, Edgar Antonio; Pedroza-Rodríguez, Aura Marina; Rodríguez-Vázquez, Refugio; Cardozo-Bernal, Ángela M.

2015-01-01

Lacasses are multicopper oxidases that can catalyze aromatic and non-aromatic compounds concomitantly with reduction of molecular oxygen to water. Fungal laccases have generated a growing interest due to their biotechnological potential applications, such as lignocellulosic material delignification, biopulping and biobleaching, wastewater treatment, and transformation of toxic organic pollutants. In this work we selected fungal genes encoding for laccase enzymes GlLCC1 in Ganoderma lucidum and POXA 1B in Pleurotus ostreatus. These genes were optimized for codon use, GC content, and regions generating secondary structures. Laccase proposed computational models, and their interaction with ABTS [2, 2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)] substrate was evaluated by molecular docking. Synthetic genes were cloned under the control of Pichia pastoris glyceraldehyde-3-phosphate dehydrogenase (GAP) constitutive promoter. P. pastoris X-33 was transformed with pGAPZαA-LaccGluc-Stop and pGAPZαA-LaccPost-Stop constructs. Optimization reduced GC content by 47 and 49% for LaccGluc-Stop and LaccPost-Stop genes, respectively. A codon adaptation index of 0.84 was obtained for both genes. 3D structure analysis using SuperPose revealed LaccGluc-Stop is similar to the laccase crystallographic structure 1GYC of Trametes versicolor. Interaction analysis of the 3D models validated through ABTS, demonstrated higher substrate affinity for LaccPost-Stop, in agreement with our experimental results with enzymatic activities of 451.08 ± 6.46 UL-1 compared to activities of 0.13 ± 0.028 UL-1 for LaccGluc-Stop. This study demonstrated that G. lucidum GlLCC1 and P. ostreatus POXA 1B gene optimization resulted in constitutive gene expression under GAP promoter and α-factor leader in P. pastoris. These are important findings in light of recombinant enzyme expression system utility for environmentally friendly designed expression systems, because of the wide range of substrates that laccases can transform. This contributes to a great gamut of products in diverse settings: industry, clinical and chemical use, and environmental applications. PMID:25611746

Computational analysis and low-scale constitutive expression of laccases synthetic genes GlLCC1 from Ganoderma lucidum and POXA 1B from Pleurotus ostreatus in Pichia pastoris.

PubMed

Rivera-Hoyos, Claudia M; Morales-Álvarez, Edwin David; Poveda-Cuevas, Sergio Alejandro; Reyes-Guzmán, Edwin Alfredo; Poutou-Piñales, Raúl A; Reyes-Montaño, Edgar Antonio; Pedroza-Rodríguez, Aura Marina; Rodríguez-Vázquez, Refugio; Cardozo-Bernal, Ángela M

2015-01-01

Lacasses are multicopper oxidases that can catalyze aromatic and non-aromatic compounds concomitantly with reduction of molecular oxygen to water. Fungal laccases have generated a growing interest due to their biotechnological potential applications, such as lignocellulosic material delignification, biopulping and biobleaching, wastewater treatment, and transformation of toxic organic pollutants. In this work we selected fungal genes encoding for laccase enzymes GlLCC1 in Ganoderma lucidum and POXA 1B in Pleurotus ostreatus. These genes were optimized for codon use, GC content, and regions generating secondary structures. Laccase proposed computational models, and their interaction with ABTS [2, 2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)] substrate was evaluated by molecular docking. Synthetic genes were cloned under the control of Pichia pastoris glyceraldehyde-3-phosphate dehydrogenase (GAP) constitutive promoter. P. pastoris X-33 was transformed with pGAPZαA-LaccGluc-Stop and pGAPZαA-LaccPost-Stop constructs. Optimization reduced GC content by 47 and 49% for LaccGluc-Stop and LaccPost-Stop genes, respectively. A codon adaptation index of 0.84 was obtained for both genes. 3D structure analysis using SuperPose revealed LaccGluc-Stop is similar to the laccase crystallographic structure 1GYC of Trametes versicolor. Interaction analysis of the 3D models validated through ABTS, demonstrated higher substrate affinity for LaccPost-Stop, in agreement with our experimental results with enzymatic activities of 451.08 ± 6.46 UL-1 compared to activities of 0.13 ± 0.028 UL-1 for LaccGluc-Stop. This study demonstrated that G. lucidum GlLCC1 and P. ostreatus POXA 1B gene optimization resulted in constitutive gene expression under GAP promoter and α-factor leader in P. pastoris. These are important findings in light of recombinant enzyme expression system utility for environmentally friendly designed expression systems, because of the wide range of substrates that laccases can transform. This contributes to a great gamut of products in diverse settings: industry, clinical and chemical use, and environmental applications.

The Effects of Prompting and Feedback on Drivers' Stopping at Stop Signs

PubMed Central

Austin, John; Hackett, Stacey; Gravina, Nicole; Lebbon, Angela

2006-01-01

Complete stops at a high-traffic intersection on the campus of a public university were increased with a prompting and consequence intervention. Data were collected at two opposing stop signs (Stop A and Stop B); however, the intervention was implemented only at Stop A. During the intervention, a volunteer stood next to Stop A holding a poster that read, “Please Stop—I Care,” with “Thank You For Stopping” on the reverse side. The poster was held by the volunteer so that drivers approaching Stop A could read the sign. Drivers approaching Stop B could see the volunteer but could not read the sign. When vehicles approaching Stop A made a complete stop, the volunteer flashed the “thank you” side of the poster to the driver. The strategy was evaluated using a multielement design. The intervention increased stops completed at Stop A from a baseline average of 13% to an intervention average of 52%. Stop B also showed improved stopping, from a baseline average of 6% to an intervention average of 28%. Data showed no relation between complete stops made and the drivers' use of turn signals and safety belts. PMID:16602391

Executive Functioning in Highly Talented Soccer Players

PubMed Central

Verburgh, Lot; Scherder, Erik J. A.; van Lange, Paul A.M.; Oosterlaan, Jaap

2014-01-01

Executive functions might be important for successful performance in sports, particularly in team sports requiring quick anticipation and adaptation to continuously changing situations in the field. The executive functions motor inhibition, attention and visuospatial working memory were examined in highly talented soccer players. Eighty-four highly talented youth soccer players (mean age 11.9), and forty-two age-matched amateur soccer players (mean age 11.8) in the age range 8 to 16 years performed a Stop Signal task (motor inhibition), the Attention Network Test (alerting, orienting, and executive attention) and a visuospatial working memory task. The highly talented soccer players followed the talent development program of the youth academy of a professional soccer club and played at the highest national soccer competition for their age. The amateur soccer players played at a regular soccer club in the same geographical region as the highly talented soccer players and play in a regular regional soccer competition. Group differences were tested using analyses of variance. The highly talented group showed superior motor inhibition as measured by stop signal reaction time (SSRT) on the Stop Signal task and a larger alerting effect on the Attention Network Test, indicating an enhanced ability to attain and maintain an alert state. No group differences were found for orienting and executive attention and visuospatial working memory. A logistic regression model with group (highly talented or amateur) as dependent variable and executive function measures that significantly distinguished between groups as predictors showed that these measures differentiated highly talented soccer players from amateur soccer players with 89% accuracy. Highly talented youth soccer players outperform youth amateur players on suppressing ongoing motor responses and on the ability to attain and maintain an alert state; both may be essential for success in soccer. PMID:24632735

Causes Of Low Efficiency Of Combined Ventilation System In Coal Mines In Resolving The Problem Of Air Leaks (Inflows) Between Levels And Surface

NASA Astrophysics Data System (ADS)

Popov, Valeriy; Filatov, Yuriy; Lee, Hee; Golik, Anatoliy

2017-11-01

The paper discusses the problem of the underground mining safety control. The long-term air intake to coal accumulations is reviewed as one of the reasons of endogenous fires during mining. The methods of combating air leaks (inflows) in order to prevent endogenous fires are analyzed. The calculations showing the discrepancy between the design calculations for the mine ventilation, disregarding a number of mining-andgeological and mining-engineering factors, and the actual conditions of mining are given. It is proved that the conversion of operating mines to combined (pressure and exhaust) ventilation system in order to reduce the endogenous fire hazard of underground mining is unreasonable due to impossibility of providing an optimal distribution of aerodynamic pressure in mines. The conversion does not exclude the entry of air into potentially hazardous zones of endogenous fires. The essence of the combined application of positive and negative control methods for the distribution of air pressure is revealed. It consists of air doors installation in easily ventilated airways and installation of pressure equalization chambers equipped with auxiliary fans near the stoppings, working sections and in parallel airways.The effectiveness of the combined application of negative and positive control methods for the air pressure distribution in order to reduce endogenous fire hazard of mining operations is proved.

Activity-Based Costing in the After Press Services Industry

NASA Astrophysics Data System (ADS)

Shevasuthisilp, Suntichai; Punsathitwong, Kosum

2009-10-01

This research was conducted to apply activity-based costing (ABC) in an after press service company in Chiang Mai province, Thailand. The company produces all of its products by one-stop service (such as coating, stitching, binding, die cutting, and gluing). All products are made to order, and have different sizes and patterns. A strategy of low price is used to compete in the marketplace. After cost analysis, the study found that the company has high overhead (36.5% of total cost). The company's problem is its use of traditional cost accounting, which has low accuracy in assigning overhead costs. If management uses this information when pricing customer orders, losses may occur because real production costs may be higher than the selling price. Therefore, the application of ABC in cost analysis can help executives receive accurate cost information; establish a sound pricing strategy; and improve the manufacturing process by determining work activities which have excessively high production costs. According to this research, 6 out of 56 items had a production cost higher than the selling price, leading to losses of 123,923 baht per year. Methods used to solve this problem were: reducing production costs; establishing suitable prices; and creating a sales promotion with lower prices for customers whose orders include processes involving unused capacity. These actions will increase overall sales of the company, and allow more efficient use of its machinery.

A hybrid BCI for enhanced control of a telepresence robot.

PubMed

Carlson, Tom; Tonin, Luca; Perdikis, Serafeim; Leeb, Robert; del R Millán, José

2013-01-01

Motor-disabled end users have successfully driven a telepresence robot in a complex environment using a Brain-Computer Interface (BCI). However, to facilitate the interaction aspect that underpins the notion of telepresence, users must be able to voluntarily and reliably stop the robot at any moment, not just drive from point to point. In this work, we propose to exploit the user's residual muscular activity to provide a fast and reliable control channel, which can start/stop the telepresence robot at any moment. Our preliminary results show that not only does this hybrid approach increase the accuracy, but it also helps to reduce the workload and was the preferred control paradigm of all the participants.

Detecting anomalies in astronomical signals using machine learning algorithms embedded in an FPGA

NASA Astrophysics Data System (ADS)

Saez, Alejandro F.; Herrera, Daniel E.

2016-07-01

Taking a large interferometer for radio astronomy, such as the ALMA1 telescope, where the amount of stations (50 in the case of ALMA's main array, which can extend to 64 antennas) produces an enormous amount of data in a short period of time - visibilities can be produced every 16msec or total power information every 1msec (this means up to 2016 baselines). With the aforementioned into account it is becoming more difficult to detect problems in the signal produced by each antenna in a timely manner (one antenna produces 4 x 2GHz spectral windows x 2 polarizations, which means a 16 GHz bandwidth signal which is later digitized using 3-bits samplers). This work will present an approach based on machine learning algorithms for detecting problems in the already digitized signal produced by the active antennas (the set of antennas which is being used in an observation). The aim of this work is to detect unsuitable, or totally corrupted, signals. In addition, this development also provides an almost real time warning which finally helps stop and investigate the problem in order to avoid collecting useless information.

Concept of modernization of input device of oil and gas separator

NASA Astrophysics Data System (ADS)

Feodorov, A. B.; Afanasov, V. I.; Miroshnikov, R. S.; Bogachev, V. V.

2017-10-01

The process of defoaming in oil production is discussed. This technology is important in oil and gas fields. Today, the technology of separating the gas fraction is based on chemical catalysis. The use of mechanical technologies improves the economics of the process. Modernization of the separator input device is based on the use of long thin tubes. The chosen length of the tubes is two orders of magnitude larger than the diameter. The separation problem is solved by creating a high centrifugal acceleration. The tubes of the input device are connected in parallel and divide the input stream into several arms. The separated fluid flows are directed tangentially into the working tubes to create a vortex motion. The number of tubes connected in parallel is calculated in accordance with the flow rate of the fluid. The connection of the working tubes to the supply line is made in the form of a flange. This connection allows carrying out maintenance without stopping the flow of fluid. An important feature of this device is its high potential for further modernization. It is concerned with the determination of the parameters of the tubes and the connection geometry in the construction of a single product.

Design of automatic curtain controlled by wireless based on single chip 51 microcomputer

NASA Astrophysics Data System (ADS)

Han, Dafeng; Chen, Xiaoning

2017-08-01

In order to realize the wireless control of the domestic intelligent curtains, a set of wireless intelligent curtain control system based on 51 single chip microcomputer have been designed in this paper. The intelligent curtain can work in the manual mode, automatic mode and sleep mode and can be carried out by the button and mobile phone APP mode loop switch. Through the photosensitive resistance module and human pyroelectric infrared sensor to collect the indoor light value and the data whether there is the person in the room, and then after single chip processing, the motor drive module is controlled to realize the positive inversion of the asynchronous motor, the intelligent opening and closing of the curtain have been realized. The operation of the motor can be stopped under the action of the switch and the curtain opening and closing and timing switch can be controlled through the keys and mobile phone APP. The optical fiber intensity, working mode, curtain state and system time are displayed by LCD1602. The system has a high reliability and security under practical testing and with the popularity and development of smart home, the design has broad market prospects.

An L-stable method for solving stiff hydrodynamics

NASA Astrophysics Data System (ADS)

Li, Shengtai

2017-07-01

We develop a new method for simulating the coupled dynamics of gas and multi-species dust grains. The dust grains are treated as pressure-less fluids and their coupling with gas is through stiff drag terms. If an explicit method is used, the numerical time step is subject to the stopping time of the dust particles, which can become extremely small for small grains. The previous semi-implicit method [1] uses second-order trapezoidal rule (TR) on the stiff drag terms and it works only for moderately small size of the dust particles. This is because TR method is only A-stable not L-stable. In this work, we use TR-BDF2 method [2] for the stiff terms in the coupled hydrodynamic equations. The L-stability of TR-BDF2 proves essential in treating a number of dust species. The combination of TR-BDF2 method with the explicit discretization of other hydro terms can solve a wide variety of stiff hydrodynamics equations accurately and efficiently. We have implemented our method in our LA-COMPASS (Los Alamos Computational Astrophysics Suite) package. We have applied the code to simulate some dusty proto-planetary disks and obtained very good match with astronomical observations.

Values under seige in Mexico: strategies for sheltering traditional values from change.

PubMed

Hubbell, L J

1993-01-01

The adverse economic conditions of inflation and falling oil prices over the late 1970s and 1980s in Mexico forced many middle-class married women out of the home and into the workplace in order to help the family maintain its socioeconomic standing. Although this phenomenon ran directly against the traditional Mexican cultural construction of gender and family, many Uruapan middle-class couples had no alternative and rationalized the change by concealing, reinterpreting, or not directly challenging traditional values. Sections discuss the dilemma of middle-class families, Mexican middle-class adaptation to wives' employment, strategies for existing change in values, and the open acceptance of changed values. The author's comments and conclusions are based largely upon interviews with 16 married women of the period. It is concluded that even though the middle class resists them, changes have taken place over the past 20 years in the acceptance of married women in the workplace, the sharing of domestic work, fertility control, and equality between spouses in family decision making. It remains to be seen, however, whether these women will stop working and return to their formerly exclusive roles of wives and mothers if and when economic conditions improve in Mexico.

Thomas of Wroclaw (1297-1378) - Medieval bishop and scholar of English origin.

PubMed

Bieganowski, Lech; Grzybowski, Andrzej

2017-11-01

Peter of Tilleberi (Tilbury), later known as bishop Thomas of Wroclaw, after completing his studies (in Bologna or in Montpellier) worked as a physician in northern Italy and probably in Spain. Later through Germany and Bohemia, he came to Wroclaw in 1336 where he joined the Order of St. Dominic. In 1352, Thomas was made an auxiliary bishop of the diocese of Wroclaw. After the episcopal consecration, Thomas stopped living in the abbey, but all the time he was well known both as a priest and physician. He is known as an author of several treatises on medical sciences. His most important work entitled Michi competit (i.e. It suits me) is composed of four parts: Regimen sanitatis (i.e. Hygiene), Aggregatum (i.e. Aggregation), Antidotarium (i.e. Medicine directory) and Practica medicinalis (i.e. Medical practices). Moreover, he is the author of other treatises including, for example, De phlebotomia et de iudiciis cruoris (i.e. On phlebotomy and blood content) and De urinis (i.e. On urine). Some Polish scientists claim that bishop Thomas of Wroclaw with his knowledge and industriousness functioned as a university faculty of medicine even though the University of Cracow had not been established yet.

[Premature death and longevity of physicians].

PubMed

Seyda, B

2000-01-01

The author has divided his work into parts. The first part entitled "Premature Death of Physicians" is dedicated to those who started their research, scientific works and fruitful medical practice but the premature death has stopped their lives and activities. Death causes are presented in ten chapters (groups of causes), i.e. Tuberculosis - Other Lung Diseases - Heart and Vessel Diseases - Septicaemiae - Infectious Diseases in Subgroups: Typhus, Plague, Cholera, Yellow Fever, Diphtheria, Influenza, Malaria, Smallpox, etc. - Encephalopathies and Mental Diseases - Malignant Neoplasms - Noninfectious Unit Diseases - Accidents - Manslaughters - Death Sentences - Suicides - Not Settled Causes of Death. There are in total 283 biographies in the first part. The second part "Longevity of Physicians" is much longer than the first one and contains 509 biographies of doctor, scientists, research workers and practitioners, meritorious in the history of medicine who attained at least 80 years of age. The biographies are arranged in 22 chapters, one for every year from 80 years of age assumed as the beginning of longevity up to 104 years in one of the cases. In each chapter the biographies are arranged in the alphabetical order. In the Epilogue the author presents shortly his conclusions and observations related to the first part and wider commentaries for the second part.

Countermanding eye-head gaze shifts in humans: marching orders are delivered to the head first.

PubMed

Corneil, Brian D; Elsley, James K

2005-07-01

The countermanding task requires subjects to cancel a planned movement on appearance of a stop signal, providing insights into response generation and suppression. Here, we studied human eye-head gaze shifts in a countermanding task with targets located beyond the horizontal oculomotor range. Consistent with head-restrained saccadic countermanding studies, the proportion of gaze shifts on stop trials increased the longer the stop signal was delayed after target presentation, and gaze shift stop-signal reaction times (SSRTs: a derived statistic measuring how long it takes to cancel a movement) averaged approximately 120 ms across seven subjects. We also observed a marked proportion of trials (13% of all stop trials) during which gaze remained stable but the head moved toward the target. Such head movements were more common at intermediate stop signal delays. We never observed the converse sequence wherein gaze moved while the head remained stable. SSRTs for head movements averaged approximately 190 ms or approximately 70-75 ms longer than gaze SSRTs. Although our findings are inconsistent with a single race to threshold as proposed for controlling saccadic eye movements, movement parameters on stop trials attested to interactions consistent with a race model architecture. To explain our data, we tested two extensions to the saccadic race model. The first assumed that gaze shifts and head movements are controlled by parallel but independent races. The second model assumed that gaze shifts and head movements are controlled by a single race, preceded by terminal ballistic intervals not under inhibitory control, and that the head-movement branch is activated at a lower threshold. Although simulations of both models produced acceptable fits to the empirical data, we favor the second alternative as it is more parsimonious with recent findings in the oculomotor system. Using the second model, estimates for gaze and head ballistic intervals were approximately 25 and 90 ms, respectively, consistent with the known physiology of the final motor paths. Further, the threshold of the head movement branch was estimated to be 85% of that required to activate gaze shifts. From these results, we conclude that a commitment to a head movement is made in advance of gaze shifts and that the comparative SSRT differences result primarily from biomechanical differences inherent to eye and head motion.

When enough is enough: how the decision was made to stop the FEAST trial: data and safety monitoring in an African trial of Fluid Expansion As Supportive Therapy (FEAST) for critically ill children

PubMed Central

2013-01-01

In resource-rich countries, bolus fluid expansion is routinely used for the treatment of poor perfusion and shock, but is less commonly used in many African settings. Controversial results from the recently completed FEAST (Fluid Expansion As Supportive Therapy) trial in African children have raised questions about the use of intravenous bolus fluid for the treatment of shock. Prior to the start of the trial, the Independent data monitoring committee (IDMC) developed stopping rules for the proof of benefit that bolus fluid resuscitation would bring. Although careful safety monitoring was put in place, there was less expectation that bolus fluid expansion would be harmful and differential stopping rules for harm were not formulated. In July 2010, two protocol amendments were agreed to increase the sample size from 2,880 to 3,600 children, and to increase bolus fluid administration. There was a non-significant trend against bolus treatment, but although the implications were discussed, the IDMC did not comment on the results, or on the amendments, in order to avoid inadvertent partial unblinding of the study. In January 2011, the trial was stopped for futility, as the combined intervention arms had significantly higher mortality (relative risk 1.46, 95% CI 1.13 to 1.90, P = 0.004) than the control arm. The stopping rule for proof of benefit was not achieved, and the IDMC stopped the trial with a lower level of significance (P = 0.01) due to futility and an increased risk of mortality from bolus fluid expansion in children enrolled in the trial. The basis for this decision was that the local standard of care was not to use bolus fluid for the care of children with shock in these African countries, and this was a different standard of care to that used in the UK. These decisions emphasize two important principles: firstly, the IDMC should avoid inadvertent unblinding of the trial by commenting on amendments, and secondly, when considering stopping a trial, the IDMC should be guided by the local standard of care rather than standards of care in other parts of the world. PMID:23531379

When enough is enough: how the decision was made to stop the FEAST trial: data and safety monitoring in an African trial of Fluid Expansion As Supportive Therapy (FEAST) for critically ill children.

PubMed

Todd, Jim; Heyderman, Robert S; Musoke, Philippa; Peto, Tim

2013-03-26

In resource-rich countries, bolus fluid expansion is routinely used for the treatment of poor perfusion and shock, but is less commonly used in many African settings. Controversial results from the recently completed FEAST (Fluid Expansion As Supportive Therapy) trial in African children have raised questions about the use of intravenous bolus fluid for the treatment of shock. Prior to the start of the trial, the Independent data monitoring committee (IDMC) developed stopping rules for the proof of benefit that bolus fluid resuscitation would bring. Although careful safety monitoring was put in place, there was less expectation that bolus fluid expansion would be harmful and differential stopping rules for harm were not formulated.In July 2010, two protocol amendments were agreed to increase the sample size from 2,880 to 3,600 children, and to increase bolus fluid administration. There was a non-significant trend against bolus treatment, but although the implications were discussed, the IDMC did not comment on the results, or on the amendments, in order to avoid inadvertent partial unblinding of the study.In January 2011, the trial was stopped for futility, as the combined intervention arms had significantly higher mortality (relative risk 1.46, 95% CI 1.13 to 1.90, P = 0.004) than the control arm. The stopping rule for proof of benefit was not achieved, and the IDMC stopped the trial with a lower level of significance (P = 0.01) due to futility and an increased risk of mortality from bolus fluid expansion in children enrolled in the trial. The basis for this decision was that the local standard of care was not to use bolus fluid for the care of children with shock in these African countries, and this was a different standard of care to that used in the UK. These decisions emphasize two important principles: firstly, the IDMC should avoid inadvertent unblinding of the trial by commenting on amendments, and secondly, when considering stopping a trial, the IDMC should be guided by the local standard of care rather than standards of care in other parts of the world.

To sell or not to sell: cigarette sales in alcohol-licenced premises.

PubMed

Burton, Suzan; Ludbrooke, Mark; Williams, Kelly; Walsberger, Scott C; Egger, Sam

2017-11-27

To obtain insight into tobacco retailing by alcohol-licenced premises, in order to understand the financial importance of tobacco sales for such retailers. Data were collected by a telephone survey of 1042 clubs, hotels and packaged liquor outlets in New South Wales, Australia. The response rate was 86.1%. Qualitative and quantitative data were obtained. Logistic and linear regression were used to determine factors associated with the probability of selling and stopping selling and the importance of cigarette sales. More than a third (36.4%) of premises contacted did not sell cigarettes. 147 (an estimated 18.1% of those who had ever sold) had stopped selling. There were significant differences in the probability of selling, in the reported importance of cigarette sales and in the probability of stopping selling, between different outlet types and other outlet characteristics (number of gaming machines, proximity of nearest alternative tobacco retailer and remoteness). Outlets where alcohol can be consumed were more likely to rate cigarette sales as 'not important' than 'important'. Despite claims by tobacco companies that tobacco sales are important for many Australian retailers, tobacco sales appear to be of limited importance for alcohol-licenced premises. This means that opposition to stopping tobacco sales where alcohol is consumed and/or sold may be less than expected. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Steady distribution structure of point defects near crystal-melt interface under pulling stop of CZ Si crystal

NASA Astrophysics Data System (ADS)

Abe, T.; Takahashi, T.; Shirai, K.

2017-02-01

In order to reveal a steady distribution structure of point defects of no growing Si on the solid-liquid interface, the crystals were grown at a high pulling rate, which Vs becomes predominant, and the pulling was suddenly stopped. After restoring the variations of the crystal by the pulling-stop, the crystals were then left in prolonged contact with the melt. Finally, the crystals were detached and rapidly cooled to freeze point defects and then a distribution of the point defects of the as-grown crystals was observed. As a result, a dislocation loop (DL) region, which is formed by the aggregation of interstitials (Is), was formed over the solid-liquid interface and was surrounded with a Vs-and-Is-free recombination region (Rc-region), although the entire crystals had been Vs rich in the beginning. It was also revealed that the crystal on the solid-liquid interface after the prolonged contact with the melt can partially have a Rc-region to be directly in contact with the melt, unlike a defect distribution of a solid-liquid interface that has been growing. This experimental result contradicts a hypothesis of Voronkov's diffusion model, which always assumes the equilibrium concentrations of Vs and Is as the boundary condition for distribution of point defects on the growth interface. The results were disscussed from a qualitative point of view of temperature distribution and thermal stress by the pulling-stop.

Fine tuning of optical signals in nanoporous anodic alumina photonic crystals by apodized sinusoidal pulse anodisation.

PubMed

Santos, Abel; Law, Cheryl Suwen; Chin Lei, Dominique Wong; Pereira, Taj; Losic, Dusan

2016-11-03

In this study, we present an advanced nanofabrication approach to produce gradient-index photonic crystal structures based on nanoporous anodic alumina. An apodization strategy is for the first time applied to a sinusoidal pulse anodisation process in order to engineer the photonic stop band of nanoporous anodic alumina (NAA) in depth. Four apodization functions are explored, including linear positive, linear negative, logarithmic positive and logarithmic negative, with the aim of finely tuning the characteristic photonic stop band of these photonic crystal structures. We systematically analyse the effect of the amplitude difference (from 0.105 to 0.840 mA cm -2 ), the pore widening time (from 0 to 6 min), the anodisation period (from 650 to 950 s) and the anodisation time (from 15 to 30 h) on the quality and the position of the characteristic photonic stop band and the interferometric colour of these photonic crystal structures using the aforementioned apodization functions. Our results reveal that a logarithmic negative apodisation function is the most optimal approach to obtain unprecedented well-resolved and narrow photonic stop bands across the UV-visible-NIR spectrum of NAA-based gradient-index photonic crystals. Our study establishes a fully comprehensive rationale towards the development of unique NAA-based photonic crystal structures with finely engineered optical properties for advanced photonic devices such as ultra-sensitive optical sensors, selective optical filters and all-optical platforms for quantum computing.

Learning [Voice

ERIC Educational Resources Information Center

Tauberer, Joshua Ian

2010-01-01

The [voice] distinction between homorganic stops and fricatives is made by a number of acoustic correlates including voicing, segment duration, and preceding vowel duration. The present work looks at [voice] from a number of multidimensional perspectives. This dissertation's focus is a corpus study of the phonetic realization of [voice] in two…

The 3.5-Meter Telescope Enclosure

DTIC Science & Technology

1994-04-01

and acoustic vibrations, and the enclosure cannot be stopped quickly in an emergency. Also, the work of Zago indicates that open-air operation of the...enclosure. This capability is useful during operational testing and maintenance of the telescope. ’ Zago , L., "Design and Performance of Large

20 CFR 216.21 - General.

Code of Federal Regulations, 2010 CFR

2010-04-01

... or widower, surviving divorced spouse, remarried widow or widower, child, or parent for any month... divorced spouse annuity, the Railroad Retirement Act requires that an applicant must stop work for pay performed as an employee for a railroad employer. In addition, no employee, spouse or divorced spouse...

Case studies suggest practical ways to increase the visibility of high-visibility enforcement programs : traffic tech.

DOT National Transportation Integrated Search

2013-08-01

High-visibility enforcement (HVE) models are an effective : strategy to reduce impaired driving. They work by increasing : drivers perceived risk of being stopped and arrested by : law enforcement if they choose to drive while impaired by : alcoho...

28 CFR 90.17 - Matching requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

....17 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) VIOLENCE AGAINST WOMEN The STOP (Services ⢠Training ⢠Officers ⢠Prosecutors) Violence Against Women Formula Grant Program § 90.17..., work space, or the monetary value of time contributed by professional and technical personnel and other...

Who cares about a camera if you are not speeding?

DOT National Transportation Integrated Search

1999-06-19

Speeding is a hazard on both busy highways and city streets, but regular police enforcement does not work very well since dense and fast moving traffic makes it both difficult and dangerous for officers to make traditional traffic stops. The paper di...

Premature Ejaculation

MedlinePlus

... feel like you are about to have an orgasm. Then the stimulation stops for about 30 seconds. Once you regain control of your response, stimulation begins again. This process is repeated 3 or 4 times before you allow yourself to have an orgasm. The squeeze method works in a similar way. ...

20 CFR 663.620 - How do the Welfare-to-Work program and the TANF program relate to the One-Stop delivery system?

Code of Federal Regulations, 2010 CFR

2010-04-01

... workforce investment strategies that help cash assistance recipients secure lasting employment. ... TITLE I OF THE WORKFORCE INVESTMENT ACT Priority and Special Populations § 663.620 How do the Welfare-to...

Making It Work.

ERIC Educational Resources Information Center

Brotherton, Phaedra

2000-01-01

The Racine Workforce Development Center pools resources and personnel to create a successful one-stop shop for job seekers and employers alike. Self-directed services for job seekers include a resource room, an academic improvement center, information about job openings, and free resume and cover letter preparation. (Author/JOW)