Programmers manual for static and dynamic reusable surface insulation stresses (resist)

NASA Technical Reports Server (NTRS)

Ogilvie, P. L.; Levy, A.; Austin, F.; Ojalvo, I. U.

1974-01-01

Programming information for the RESIST program for the dynamic and thermal stress analysis of the space shuttle surface insulation is presented. The overall flow chart of the program, overlay chart, data set allocation, and subprogram calling sequence are given along with a brief description of the individual subprograms and typical subprogram output.

Evaluation of a Passive Nature Viewing Program Set to Music.

PubMed

Cadman, Sally J

2014-09-01

Research has revealed that passive nature viewing (viewing nature scenes without actually being in nature) has many health benefits but little is known about the best method of offering this complementary modality. The purpose of this pilot program was to evaluate the impact of a passive nature viewing program set to music on stress reduction in adults living in the community. A pre- and postsurvey design along with weekly recordings of stress and relaxation levels were used to evaluate the effect of this passive nature viewing program on stress reduction. Participants watched one of three preselected nature scenes for 5 minutes a day over 1 month and rated their stress and relaxation levels weekly on a 100-mm Visual Analogue Scale before and after viewing the nature DVD. Quantitative analysis were not performed because of the less number of subjects (n = 10) completing the study. Qualitative analysis found five key categories that have an impact on program use: (a) technology, (b) personal preferences, (c) time, (d) immersion, and (e) use of the program. Holistic nurses may consider integrating patient preferences and immersion strategies in the design of future passive nature viewing programs to reduce attrition and improve success. © The Author(s) 2013.

Fractional watt Vuillemier cryogenic refrigerator program engineering notebook. Volume 2: Stress analysis

NASA Technical Reports Server (NTRS)

Miller, W. S.

1974-01-01

A structural analysis performed on the 1/4-watt cryogenic refrigerator. The analysis covered the complete assembly except for the cooling jacket and mounting brackets. Maximum stresses, margin of safety, and natural frequencies were calculated for structurally loaded refrigerator components shown in assembly drawings. The stress analysis indicates that the design is satisfactory for the specified vibration environment, and the proof, burst, and normal operating loads.

Plane stress analysis of wood members using isoparametric finite elements, a computer program

Treesearch

Gary D. Gerhardt

1983-01-01

A finite element program is presented which computes displacements, strains, and stresses in wood members of arbitrary shape which are subjected to plane strain/stressloading conditions. This report extends a program developed by R. L. Taylor in 1977, by adding both the cubic isoparametric finite element and the capability to analyze nonisotropic materials. The...

Study of inducer load and stress, volume 2

NASA Technical Reports Server (NTRS)

1972-01-01

A program of analysis, design, fabrication and testing has been conducted to develop computer programs for predicting rocket engine turbopump inducer hydrodynamic loading, stress magnitude and distribution, and vibration characteristics. Methods of predicting blade loading, stress, and vibration characteristics were selected from a literature search and used as a basis for the computer programs. An inducer, representative of typical rocket engine inducers, was designed, fabricated, and tested with special instrumentation selected to provide measurements of blade surface pressures and stresses. Data from the tests were compared with predicted values and the computer programs were revised as required to improve correlation. For Volume 1 see N71-20403. For Volume 2 see N71-20404.

Analysis of thermal stresses and metal movement during welding

NASA Technical Reports Server (NTRS)

Muraki, T.; Masubuchi, K.

1973-01-01

The research is reported concerning the development of a system of mathematical solutions and computer programs for one- and two-dimensional analyses for thermal stresses. Reports presented include: the investigation of thermal stress and buckling of tantalum and columbium sheet; and analysis of two dimensional thermal strains and metal movement during welding.

Healthcare Work and Organizational Interventions to Prevent Work-related Stress in Brindisi, Italy.

PubMed

d'Ettorre, Gabriele; Greco, Mariarita

2015-03-01

Organizational changes that involve healthcare hospital departments and care services of health districts, and ongoing technological innovations and developments in society increasingly expose healthcare workers (HCWs) to work-related stress (WRS). Minimizing occupational exposure to stress requires effective risk stress assessment and management programs. The authors conducted an integrated analysis of stress sentinel indicators, an integrated analysis of objective stress factors of occupational context and content areas, and an integrated analysis between nurses and physicians of hospital departments and care services of health districts in accordance with a multidimensional validated tool developed in Italy by the National Network for the Prevention of Work-Related Psychosocial Disorders. The purpose of this retrospective observational study was to detect and analyze in different work settings the level of WRS resulting from organizational changes implemented by hospital healthcare departments and care services of health districts in a sample of their employees. The findings of the study showed that hospital HCWs seemed to incur a medium level risk of WRS that was principally the result of work context factors. The implementation of improvement interventions focused on team development, safety training programs, and adopting an ethics code for HCWs, and it effectively and significantly reduced the level of WRS risk in the workplace. In this study HCW resulted to be exposed to occupational stress factors susceptible to reduction. Stress management programs aimed to improve work context factors associated with occupational stress are required to minimize the impact of WRS on workers.

On 3-D inelastic analysis methods for hot section components (base program)

NASA Technical Reports Server (NTRS)

Wilson, R. B.; Bak, M. J.; Nakazawa, S.; Banerjee, P. K.

1986-01-01

A 3-D Inelastic Analysis Method program is described. This program consists of a series of new computer codes embodying a progression of mathematical models (mechanics of materials, special finite element, boundary element) for streamlined analysis of: (1) combustor liners, (2) turbine blades, and (3) turbine vanes. These models address the effects of high temperatures and thermal/mechanical loadings on the local (stress/strain)and global (dynamics, buckling) structural behavior of the three selected components. Three computer codes, referred to as MOMM (Mechanics of Materials Model), MHOST (Marc-Hot Section Technology), and BEST (Boundary Element Stress Technology), have been developed and are briefly described in this report.

Stress reduction programs in patients with elevated blood pressure: a systematic review and meta-analysis.

PubMed

Rainforth, Maxwell V; Schneider, Robert H; Nidich, Sanford I; Gaylord-King, Carolyn; Salerno, John W; Anderson, James W

2007-12-01

Substantial evidence indicates that psychosocial stress contributes to hypertension and cardiovascular disease (CVD). Previous meta-analyses of stress reduction and high blood pressure (BP) were outdated and/or methodologically limited. Therefore, we conducted an updated systematic review of the published literature and identified 107 studies on stress reduction and BP. Seventeen trials with 23 treatment comparisons and 960 participants with elevated BP met criteria for well-designed randomized controlled trials and were replicated within intervention categories. Meta-analysis was used to calculate BP changes for biofeedback, -0.8/-2.0 mm Hg (P = NS); relaxation-assisted biofeedback, +4.3/+2.4 mm Hg (P = NS); progressive muscle relaxation, -1.9/-1.4 mm Hg (P = NS); stress management training, -2.3/-1.3 mm (P = NS); and the Transcendental Meditation program, -5.0/-2.8 mm Hg (P = 0.002/0.02). Available evidence indicates that among stress reduction approaches, the Transcendental Meditation program is associated with significant reductions in BP. Related data suggest improvements in other CVD risk factors and clinical outcomes.

Stress Reduction Programs in Patients with Elevated Blood Pressure: A Systematic Review and Meta-analysis

PubMed Central

Rainforth, Maxwell V.; Schneider, Robert H.; Nidich, Sanford I.; Gaylord-King, Carolyn; Salerno, John W.; Anderson, James W.

2007-01-01

Substantial evidence indicates that psychosocial stress contributes to hypertension and cardiovascular disease (CVD). Previous meta-analyses of stress reduction and high blood pressure (BP) were outdated and/or methodologically limited. Therefore, we conducted an updated systematic review of the published literature and identified 107 studies on stress reduction and BP. Seventeen trials with 23 treatment comparisons and 960 participants with elevated BP met criteria for well-designed randomized controlled trials and were replicated within intervention categories. Meta-analysis was used to calculate BP changes for biofeedback, −0.8/−2.0 mm Hg (P = NS); relaxation-assisted biofeedback, +4.3/+2.4 mm Hg (P = NS); progressive muscle relaxation, −1.9/−1.4 mm Hg (P = NS); stress management training, −2.3/−1.3 mm (P = NS); and the Transcendental Meditation program, −5.0/−2.8 mm Hg (P = 0.002/0.02). Available evidence indicates that among stress reduction approaches, the Transcendental Meditation program is associated with significant reductions in BP. Related data suggest improvements in other CVD risk factors and clinical outcomes. PMID:18350109

Interventions to reduce stress in university students: a review and meta-analysis.

PubMed

Regehr, Cheryl; Glancy, Dylan; Pitts, Annabel

2013-05-15

Recent research has revealed concerning rates of anxiety and depression among university students. Nevertheless, only a small percentage of these students receive treatment from university health services. Universities are thus challenged with instituting preventative programs that address student stress and reduce resultant anxiety and depression. A systematic review of the literature and meta-analysis was conducted to examine the effectiveness of interventions aimed at reducing stress in university students. Studies were eligible for inclusion if the assignment of study participants to experimental or control groups was by random allocation or parallel cohort design. Retrieved studies represented a variety of intervention approaches with students in a broad range of programs and disciplines. Twenty-four studies, involving 1431 students were included in the meta-analysis. Cognitive, behavioral and mindfulness interventions were associated with decreased symptoms of anxiety. Secondary outcomes included lower levels of depression and cortisol. Included studies were limited to those published in peer reviewed journals. These studies over-represent interventions with female students in Western countries. Studies on some types of interventions such as psycho-educational and arts based interventions did not have sufficient data for inclusion in the meta-analysis. This review provides evidence that cognitive, behavioral, and mindfulness interventions are effective in reducing stress in university students. Universities are encouraged to make such programs widely available to students. In addition however, future work should focus on developing stress reduction programs that attract male students and address their needs. Copyright © 2012 Elsevier B.V. All rights reserved.

Thermal-stress analysis for wood composite blade. [horizontal axis wind turbines

NASA Technical Reports Server (NTRS)

Fu, K. C.; Harb, A.

1984-01-01

The thermal-stress induced by solar insolation on a wood composite blade of a Mod-OA wind turbine was investigated. The temperature distribution throughout the blade (a heat conduction problem) was analyzed and the thermal-stress distribution of the blades caused by the temperature distribution (a thermal-stress analysis problem) was then determined. The computer programs used for both problems are included along with output examples.

2012 Gordon Research Conference on Microbial Stress Response, Schedule and Speaker/Poster Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donohue, Timothy J.

2012-07-20

The Gordon Research Conference on Microbial Stress Response was held at Mount Holyoke College, South Hadley, Massachusetts, July 15-20, 2012. The Conference was well-attended with 180 participants. The 2012 Microbial Stress Responses Gordon Research Conference will provide a forum for the open reporting of recent discoveries on the diverse mechanisms employed by microbes to respond to stress. Approaches range from analysis at the molecular level (how are signals perceived and transmitted to change gene expression or function) to cellular and microbial community responses. Attached is a copy of the formal schedule and speaker program and the poster program.

Design and Stress Analysis of Low-Noise Adjusted Bearing Contact Spiral Bevel Gears

NASA Technical Reports Server (NTRS)

Fuentes, A.; Litvin, F. L.; Mullins, B. R.; Woods, R.; Handschuh, R. F.; Lewicki, David G.

2002-01-01

An integrated computerized approach for design and stress analysis of low-noise spiral bevel gear drives with adjusted bearing contact is proposed. The procedure of computations is an iterative process that requires four separate procedures and provide: (a) a parabolic function of transmission errors that is able to reduce the effect of errors of alignment on noise and vibration, and (b) reduction of the shift of bearing contact caused by misalignment. Application of finite element analysis enables us to determine the contact and bending stresses and investigate the formation of the bearing contact. The design of finite element models and boundary conditions is automated and does not require intermediate CAD computer programs for application of general purpose computer program for finite element analysis.

Finite element stress analysis of polymers at high strains

NASA Technical Reports Server (NTRS)

Durand, M.; Jankovich, E.

1973-01-01

A numerical analysis is presented for the problem of a flat rectangular rubber membrane with a circular rigid inclusion undergoing high strains due to the action of an axial load. The neo-hookean constitutive equations are introduced into the general purpose TITUS program by means of equivalent hookean constants and initial strains. The convergence is achieved after a few iterations. The method is not limited to any specific program. The results are in good agreement with those of a company sponsored photoelastic stress analysis. The theoretical and experimental deformed shapes also agree very closely with one another. For high strains it is demonstrated that using the conventional HOOKE law the stress concentration factor obtained is unreliable in the case of rubberlike material.

Computer aided stress analysis of long bones utilizing computer tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marom, S.A.

1986-01-01

A computer aided analysis method, utilizing computed tomography (CT) has been developed, which together with a finite element program determines the stress-displacement pattern in a long bone section. The CT data file provides the geometry, the density and the material properties for the generated finite element model. A three-dimensional finite element model of a tibial shaft is automatically generated from the CT file by a pre-processing procedure for a finite element program. The developed pre-processor includes an edge detection algorithm which determines the boundaries of the reconstructed cross-sectional images of the scanned bone. A mesh generation procedure than automatically generatesmore » a three-dimensional mesh of a user-selected refinement. The elastic properties needed for the stress analysis are individually determined for each model element using the radiographic density (CT number) of each pixel with the elemental borders. The elastic modulus is determined from the CT radiographic density by using an empirical relationship from the literature. The generated finite element model, together with applied loads, determined from existing gait analysis and initial displacements, comprise a formatted input for the SAP IV finite element program. The output of this program, stresses and displacements at the model elements and nodes, are sorted and displayed by a developed post-processor to provide maximum and minimum values at selected locations in the model.« less

A computer program for predicting nonlinear uniaxial material responses using viscoplastic models

NASA Technical Reports Server (NTRS)

Chang, T. Y.; Thompson, R. L.

1984-01-01

A computer program was developed for predicting nonlinear uniaxial material responses using viscoplastic constitutive models. Four specific models, i.e., those due to Miller, Walker, Krieg-Swearengen-Rhode, and Robinson, are included. Any other unified model is easily implemented into the program in the form of subroutines. Analysis features include stress-strain cycling, creep response, stress relaxation, thermomechanical fatigue loop, or any combination of these responses. An outline is given on the theoretical background of uniaxial constitutive models, analysis procedure, and numerical integration methods for solving the nonlinear constitutive equations. In addition, a discussion on the computer program implementation is also given. Finally, seven numerical examples are included to demonstrate the versatility of the computer program developed.

A Comparison of Students' Perceptions of Stress in Parallel Problem-Based and Lecture-Based Curricula.

PubMed

Wardley, C Sonia; Applegate, E Brooks; Almaleki, A Deyab; Van Rhee, James A

2016-03-01

A 6-year longitudinal study was conducted to compare the perceived stress experienced during a 2-year master's physician assistant program by 5 cohorts of students enrolled in either problem-based learning (PBL) or lecture-based learning (LBL) curricular tracks. The association of perceived stress with academic achievement was also assessed. Students rated their stress levels on visual analog scales in relation to family obligations, financial concerns, schoolwork, and relocation and overall on 6 occasions throughout the program. A mixed model analysis of variance examined the students' perceived level of stress by curriculum and over time. Regression analysis further examined school work-related stress after controlling for other stressors and possible lag effect of stress from the previous time point. Students reported that overall stress increased throughout the didactic year followed by a decline in the clinical year with statistically significant curricular (PBL versus LBL) and time differences. PBL students also reported significantly more stress resulting from school work than LBL students at some time points. Moreover, when the other measured stressors and possible lag effects were controlled, significant differences between PBL and LBL students' perceived stress related to school work persisted at the 8- and 12-month measurement points. Increased stress in both curricula was associated with higher achievement in overall and individual organ system examination scores. Physician assistant programs that embrace a PBL pedagogy to prepare students to think clinically may need to provide students with additional support through the didactic curriculum.

Monolithic ceramic analysis using the SCARE program

NASA Technical Reports Server (NTRS)

Manderscheid, Jane M.

1988-01-01

The Structural Ceramics Analysis and Reliability Evaluation (SCARE) computer program calculates the fast fracture reliability of monolithic ceramic components. The code is a post-processor to the MSC/NASTRAN general purpose finite element program. The SCARE program automatically accepts the MSC/NASTRAN output necessary to compute reliability. This includes element stresses, temperatures, volumes, and areas. The SCARE program computes two-parameter Weibull strength distributions from input fracture data for both volume and surface flaws. The distributions can then be used to calculate the reliability of geometrically complex components subjected to multiaxial stress states. Several fracture criteria and flaw types are available for selection by the user, including out-of-plane crack extension theories. The theoretical basis for the reliability calculations was proposed by Batdorf. These models combine linear elastic fracture mechanics (LEFM) with Weibull statistics to provide a mechanistic failure criterion. Other fracture theories included in SCARE are the normal stress averaging technique and the principle of independent action. The objective of this presentation is to summarize these theories, including their limitations and advantages, and to provide a general description of the SCARE program, along with example problems.

Software Models Impact Stresses

NASA Technical Reports Server (NTRS)

Hanshaw, Timothy C.; Roy, Dipankar; Toyooka, Mark

1991-01-01

Generalized Impact Stress Software designed to assist engineers in predicting stresses caused by variety of impacts. Program straightforward, simple to implement on personal computers, "user friendly", and handles variety of boundary conditions applied to struck body being analyzed. Applications include mathematical modeling of motions and transient stresses of spacecraft, analysis of slamming of piston, of fast valve shutoffs, and play of rotating bearing assembly. Provides fast and inexpensive analytical tool for analysis of stresses and reduces dependency on expensive impact tests. Written in FORTRAN 77. Requires use of commercial software package PLOT88.

Dynaflow User’s Guide

DTIC Science & Technology

1988-11-01

264 ANALYSIS RESTART. ............. ..... ....... 269 1.0 TITLE CARD. .............. ............. 271 2.0 CONTROL CARDS...stress soil model will provide a tool for such analysis of waterfront structures. To understand the significance of liquefaction, it is important to note...Implementing this effective stress soil model into a finite element computer program would allow analysis of soil and structure together. TECHNICAL BACKGROUND

Stress management at the worksite: reversal of symptoms profile and cardiovascular dysregulation.

PubMed

Lucini, Daniela; Riva, Silvano; Pizzinelli, Paolo; Pagani, Massimo

2007-02-01

Work stress may increase cardiovascular risk either indirectly, by inducing unhealthy life styles, or directly, by affecting the autonomic nervous system and arterial pressure. We hypothesized that, before any apparent sign of disease, work-related stress is already accompanied by alterations of RR variability profile and that a simple onsite stress management program based on cognitive restructuring and relaxation training could reduce the level of stress symptoms, revert stress-related autonomic nervous system dysregulation, and lower arterial pressure. We compared 91 white-collar workers, enrolled at a time of work downsizing (hence, in a stress condition), with 79 healthy control subjects. Psychological profiles were assessed by questionnaires and autonomic nervous system regulation by spectral analysis of RR variability. We also tested a simple onsite stress management program (cognitive restructuring and relaxation training) in a subgroup of workers compared with a sham subgroup (sham program). Workers presented an elevated level of stress-related symptoms and an altered variability profile as compared with control subjects (low-frequency component of RR variability was, respectively, 65.2+/-2 versus 55.3+/-2 normalized units; P<0.001; opposite changes were observed for the high-frequency component). These alterations were largely reverted (low-frequency component of RR variability from 63.6+/-3.9 to 49.3+/-3 normalized units; P<0.001) by the stress management program, which also slightly lowered systolic arterial pressure. No changes were observed in the sham program group. This noninvasive study indicates that work stress is associated with unpleasant symptoms and with an altered autonomic profile and suggests that a stress management program could be implemented at the worksite, with possible preventive advantages for hypertension.

Allowable Stresses For Use in Dynamic Analysis of PF-4 Fire Suppression System Piping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Menefee, Maia Catherine; Salmon, Michael W.

The purpose of this paper is to present the results of a limited test program performed on samples of fittings removed from the PF-4 fire suppression system and to present recommendations for allowable stresses to be used in subsequent piping analysis.

Piloting a stress management and mindfulness program for undergraduate nursing students: student feedback and lessons learned.

PubMed

van der Riet, Pamela; Rossiter, Rachel; Kirby, Dianne; Dluzewska, Teresa; Harmon, Charles

2015-01-01

Widespread reports of high stress levels and mental health problems among university student populations indicate the use of interventions to facilitate stress reduction and support student resilience and wellbeing. There is growing evidence that regular mindfulness practice may confer positive health benefits and reduced stress levels. The aim of this pilot project was to explore the impact of a seven-week stress management and mindfulness program as a learning support and stress reduction method for nursing and midwifery students. The program was conducted at a large regional university in Australia. Fourteen first-year undergraduate nursing and midwifery students agreed to attend the program and to participate in a follow-up focus group. A descriptive qualitative design was utilised to examine the impact of the program. A semi-structured focus group interview was conducted with a thematic analysis undertaken of the transcript and process notes. Ten students completed the research component of this project by participating in the focus group interview. Three main themes capture the participants' experience: attending to self, attending to others and attending to program related challenges. Data indicate a positive impact on sleep, concentration, clarity of thought and a reduction in negative cognitions. Participants also identified challenges related to timetabling, program structure and venue. Overall, this pilot program enhanced the participants' sense of well-being. Despite the challenges, benefits were identified on a personal and professional level. Valuable feedback was provided that will be used to further develop and expand stress management and mindfulness programs offered to students attending this university. Copyright © 2014. Published by Elsevier Ltd.

MEGA16 - Computer program for analysis and extrapolation of stress-rupture data

NASA Technical Reports Server (NTRS)

Ensign, C. R.

1981-01-01

The computerized form of the minimum commitment method of interpolating and extrapolating stress versus time to failure data, MEGA16, is described. Examples are given of its many plots and tabular outputs for a typical set of data. The program assumes a specific model equation and then provides a family of predicted isothermals for any set of data with at least 12 stress-rupture results from three different temperatures spread over reasonable stress and time ranges. It is written in FORTRAN 4 using IBM plotting subroutines and its runs on an IBM 370 time sharing system.

Common and Dissociable Neural Activity After Mindfulness-Based Stress Reduction and Relaxation Response Programs.

PubMed

Sevinc, Gunes; Hölzel, Britta K; Hashmi, Javeria; Greenberg, Jonathan; McCallister, Adrienne; Treadway, Michael; Schneider, Marissa L; Dusek, Jeffery A; Carmody, James; Lazar, Sara W

2018-06-01

We investigated common and dissociable neural and psychological correlates of two widely used meditation-based stress reduction programs. Participants were randomized to the Relaxation Response (RR; n = 18; 56% female) or the Mindfulness-Based Stress Reduction (MBSR; n = 16; 56% female) programs. Both programs use a "bodyscan" meditation; however, the RR program explicitly emphasizes physical relaxation during this practice, whereas the MBSR program emphasizes mindful awareness with no explicit relaxation instructions. After the programs, neural activity during the respective meditation was investigated using functional magnetic resonance imaging. Both programs were associated with reduced stress (for RR, from 14.1 ± 6.6 to 11.3 ± 5.5 [Cohen's d = 0.50; for MBSR, from 17.7 ± 5.7 to 11.9 ± 5.0 [Cohen's d = 1.02]). Conjunction analyses revealed functional coupling between ventromedial prefrontal regions and supplementary motor areas (p < .001). The disjunction analysis indicated that the RR bodyscan was associated with stronger functional connectivity of the right inferior frontal gyrus-an important hub of intentional inhibition and control-with supplementary motor areas (p < .001, family-wise error [FWE] rate corrected). The MBSR program was uniquely associated with improvements in self-compassion and rumination, and the within-group analysis of MBSR bodyscan revealed significant functional connectivity of the right anterior insula-an important hub of sensory awareness and salience-with pregenual anterior cingulate during bodyscan meditation compared with rest (p = .03, FWE corrected). The bodyscan exercises in each program were associated with both overlapping and differential functional coupling patterns, which were consistent with each program's theoretical foundation. These results may have implications for the differential effects of these programs for the treatment of diverse conditions.

HOLEGAGE 1.0 - Strain-Gauge Drilling Analysis Program

NASA Technical Reports Server (NTRS)

Hampton, Roy V.

1992-01-01

Interior stresses inferred from changes in surface strains as hole is drilled. Computes stresses using strain data from each drilled-hole depth layer. Planar stresses computed in three ways: least-squares fit for linear variation with depth, integral method to give incremental stress data for each layer, and/or linear fit to integral data. Written in FORTRAN 77.

Advanced composites structural concepts and materials technologies for primary aircraft structures. Structural response and failure analysis: ISPAN modules users manual

NASA Technical Reports Server (NTRS)

Hairr, John W.; Huang, Jui-Ten; Ingram, J. Edward; Shah, Bharat M.

1992-01-01

The ISPAN Program (Interactive Stiffened Panel Analysis) is an interactive design tool that is intended to provide a means of performing simple and self contained preliminary analysis of aircraft primary structures made of composite materials. The program combines a series of modules with the finite element code DIAL as its backbone. Four ISPAN Modules were developed and are documented. These include: (1) flat stiffened panel; (2) curved stiffened panel; (3) flat tubular panel; and (4) curved geodesic panel. Users are instructed to input geometric and material properties, load information and types of analysis (linear, bifurcation buckling, or post-buckling) interactively. The program utilizing this information will generate finite element mesh and perform analysis. The output in the form of summary tables of stress or margins of safety, contour plots of loads or stress, and deflected shape plots may be generalized and used to evaluate specific design.

A hybrid-stress finite element approach for stress and vibration analysis in linear anisotropic elasticity

NASA Technical Reports Server (NTRS)

Oden, J. Tinsley; Fly, Gerald W.; Mahadevan, L.

1987-01-01

A hybrid stress finite element method is developed for accurate stress and vibration analysis of problems in linear anisotropic elasticity. A modified form of the Hellinger-Reissner principle is formulated for dynamic analysis and an algorithm for the determination of the anisotropic elastic and compliance constants from experimental data is developed. These schemes were implemented in a finite element program for static and dynamic analysis of linear anisotropic two dimensional elasticity problems. Specific numerical examples are considered to verify the accuracy of the hybrid stress approach and compare it with that of the standard displacement method, especially for highly anisotropic materials. It is that the hybrid stress approach gives much better results than the displacement method. Preliminary work on extensions of this method to three dimensional elasticity is discussed, and the stress shape functions necessary for this extension are included.

[Effects of Family Support Programs for Caregivers of People with Dementia - Caregiving Burden, Depression, and Stress: Systematic Review and Meta-analysis].

PubMed

Park, Seyeon; Park, Myonghwa

2015-10-01

The objective of this systematic review was to assess the effects of family support programs on caregiving burden, depression, and stress in family caregivers of people with dementia. A literature search was conducted of electronic databases to identify randomized controlled studies with family support programs done between 2000 and 2014. Studies published in English and/or Korean were included for the analysis with search strategies adapted from the Cochrane Dementia and Cognitive Improvement Group. Studies were rated for quality assessment by two independent reviewers using the appraisal checklist developed by Cochrane Reviews and Dissemination. Of 8,334 articles identified in the literature search, full texts of 76 articles that met the inclusion criteria were reviewed and 38 were found to include relevant outcomes. Results from selected studies were pooled in statistical meta-analysis using Review Manager Software and heterogeneity between combined studies was assessed using the Chi-square test. Meta-analysis showed that the effect sizes of family caregiver support programs were small to medium for categories of caregiving burden (Hedge's g=-0.17, 95% CI=-0.30~-0.04), depression (Hedge's g=-0.30, 95% CI=-0.40~-0.20), and stress (Hedge's g=-0.39, 95% CI=-0.52~-0.25). The review results indicate that a support programs can assist family caregivers in reducing their psycho-emotional distress.

SORTAN: a Unix program for calculation and graphical presentation of fault slip as induced by stresses

NASA Astrophysics Data System (ADS)

Pascal, Christophe

2004-04-01

Stress inversion programs are nowadays frequently used in tectonic analysis. The purpose of this family of programs is to reconstruct the stress tensor characteristics from fault slip data acquired in the field or derived from earthquake focal mechanisms (i.e. inverse methods). Until now, little attention has been paid to direct methods (i.e. to determine fault slip directions from an inferred stress tensor). During the 1990s, the fast increase in resolution in 3D seismic reflection techniques made it possible to determine the geometry of subsurface faults with a satisfactory accuracy but not to determine precisely their kinematics. This recent improvement allows the use of direct methods. A computer program, namely SORTAN, is introduced. The program is highly portable on Unix platforms, straightforward to install and user-friendly. The computation is based on classical stress-fault slip relationships and allows for fast treatment of a set of faults and graphical presentation of the results (i.e. slip directions). In addition, the SORTAN program permits one to test the sensitivity of the results to input uncertainties. It is a complementary tool to classical stress inversion methods and can be used to check the mechanical consistency and the limits of structural interpretations based upon 3D seismic reflection surveys.

Acceptability of an e-learning program to help nursing assistants manage relationship conflict in nursing homes.

PubMed

Marziali, Elsa; Mackenzie, Corey Scott; Tchernikov, Illia

2015-02-01

Management of nursing assistants' (NAs) emotional stress from relationship conflicts with residents, families, and coworkers is rarely the focus of educational programs. Our objective was to gather feedback from NAs and their nursing supervisors (NSs) about the utility of our e-learning program for managing relationship stress. A total of 147 NAs and their NSs from 17 long-term care homes viewed the educational modules (DVD slides with voice-over), either individually or in small groups, and provided feedback using conference call focus groups. Qualitative analysis of NA feedback showed that workplace relationship conflict stress was associated with workload and the absence of a forum for discussing relationship conflicts that was not acknowledged by NSs. This accessible e-learning program provides NAs with strategies for managing stressful emotions arising from workplace relationship conflict situations and underscores the importance of supervisory support and team collaboration in coping with emotionally evoked workplace stress. © The Author(s) 2014.

Development of the NASA/FLAGRO computer program for analysis of airframe structures

NASA Technical Reports Server (NTRS)

Forman, R. G.; Shivakumar, V.; Newman, J. C., Jr.

1994-01-01

The NASA/FLAGRO (NASGRO) computer program was developed for fracture control analysis of space hardware and is currently the standard computer code in NASA, the U.S. Air Force, and the European Agency (ESA) for this purpose. The significant attributes of the NASGRO program are the numerous crack case solutions, the large materials file, the improved growth rate equation based on crack closure theory, and the user-friendly promptive input features. In support of the National Aging Aircraft Research Program (NAARP); NASGRO is being further developed to provide advanced state-of-the-art capability for damage tolerance and crack growth analysis of aircraft structural problems, including mechanical systems and engines. The project currently involves a cooperative development effort by NASA, FAA, and ESA. The primary tasks underway are the incorporation of advanced methodology for crack growth rate retardation resulting from spectrum loading and improved analysis for determining crack instability. Also, the current weight function solutions in NASGRO or nonlinear stress gradient problems are being extended to more crack cases, and the 2-d boundary integral routine for stress analysis and stress-intensity factor solutions is being extended to 3-d problems. Lastly, effort is underway to enhance the program to operate on personal computers and work stations in a Windows environment. Because of the increasing and already wide usage of NASGRO, the code offers an excellent mechanism for technology transfer for new fatigue and fracture mechanics capabilities developed within NAARP.

User's manual for FRAC3D: Supplement to report on stress analysis for structures with surface cracks

NASA Technical Reports Server (NTRS)

Bell, J. C.; Hopper, A. T.; Hayes, P. A.

1978-01-01

The FRAC3D computer program, designed for use in analyzing stresses in structures (including plates, bars, or blocks) which may contain part-circular surface cracks or embedded circular cracks is described. Instructions are provided for preparing input, including that for the supporting programs LATTICE and MATSOL as well as for FRAC3D. The course of a substantial illustrative calculation is shown with both input and output. The formulas underlying the calculations are summarized and related to the subroutines in which they are used. Many issues of strategy in using this program for analysing stresses around surface cracks are elucidated.

CARES/LIFE Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Powers, Lynn M.; Janosik, Lesley A.; Gyekenyesi, John P.

2003-01-01

This manual describes the Ceramics Analysis and Reliability Evaluation of Structures Life Prediction (CARES/LIFE) computer program. The program calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/or proof test loading. CARES/LIFE is an extension of the CARES (Ceramic Analysis and Reliability Evaluation of Structures) computer program. The program uses results from MSC/NASTRAN, ABAQUS, and ANSYS finite element analysis programs to evaluate component reliability due to inherent surface and/or volume type flaws. CARES/LIFE accounts for the phenomenon of subcritical crack growth (SCG) by utilizing the power law, Paris law, or Walker law. The two-parameter Weibull cumulative distribution function is used to characterize the variation in component strength. The effects of multiaxial stresses are modeled by using either the principle of independent action (PIA), the Weibull normal stress averaging method (NSA), or the Batdorf theory. Inert strength and fatigue parameters are estimated from rupture strength data of naturally flawed specimens loaded in static, dynamic, or cyclic fatigue. The probabilistic time-dependent theories used in CARES/LIFE, along with the input and output for CARES/LIFE, are described. Example problems to demonstrate various features of the program are also included.

Stress and Reliability Analysis of a Metal-Ceramic Dental Crown

NASA Technical Reports Server (NTRS)

Anusavice, Kenneth J; Sokolowski, Todd M.; Hojjatie, Barry; Nemeth, Noel N.

1996-01-01

Interaction of mechanical and thermal stresses with the flaws and microcracks within the ceramic region of metal-ceramic dental crowns can result in catastrophic or delayed failure of these restorations. The objective of this study was to determine the combined influence of induced functional stresses and pre-existing flaws and microcracks on the time-dependent probability of failure of a metal-ceramic molar crown. A three-dimensional finite element model of a porcelain fused-to-metal (PFM) molar crown was developed using the ANSYS finite element program. The crown consisted of a body porcelain, opaque porcelain, and a metal substrate. The model had a 300 Newton load applied perpendicular to one cusp, a load of 30ON applied at 30 degrees from the perpendicular load case, directed toward the center, and a 600 Newton vertical load. Ceramic specimens were subjected to a biaxial flexure test and the load-to-failure of each specimen was measured. The results of the finite element stress analysis and the flexure tests were incorporated in the NASA developed CARES/LIFE program to determine the Weibull and fatigue parameters and time-dependent fracture reliability of the PFM crown. CARES/LIFE calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/Or proof test loading. This program is an extension of the CARES (Ceramics Analysis and Reliability Evaluation of Structures) computer program.

Bolivia renewable energy development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, P.

1997-12-01

The author summarizes changes which have occurred in Bolivia in the past year which have had an impact on renewable energy source development. Political changes have included the privatization of power generation and power distribution, and resulted in a new role for state level government and participation by the individual. A National Rural Electrification Plan was adopted in 1996, which stresses the use of GIS analysis and emphasizes factors such as off grid, economic index, population density, maintenance risk, and local organizational structure. The USAID program has chosen to stress economic development, environmental programs, and health over village power programs.more » The national renewables program has adopted a new development direction, with state projects, geothermal projects, and private sector involvement stressed.« less

Ceramic material life prediction: A program to translate ANSYS results to CARES/LIFE reliability analysis

NASA Technical Reports Server (NTRS)

Vonhermann, Pieter; Pintz, Adam

1994-01-01

This manual describes the use of the ANSCARES program to prepare a neutral file of FEM stress results taken from ANSYS Release 5.0, in the format needed by CARES/LIFE ceramics reliability program. It is intended for use by experienced users of ANSYS and CARES. Knowledge of compiling and linking FORTRAN programs is also required. Maximum use is made of existing routines (from other CARES interface programs and ANSYS routines) to extract the finite element results and prepare the neutral file for input to the reliability analysis. FORTRAN and machine language routines as described are used to read the ANSYS results file. Sub-element stresses are computed and written to a neutral file using FORTRAN subroutines which are nearly identical to those used in the NASCARES (MSC/NASTRAN to CARES) interface.

Mindfulness meditation-based stress reduction: experience with a bilingual inner-city program.

PubMed

Roth, B; Creaser, T

1997-03-01

This article describes a bilingual mindfulness meditation-based stress reduction program in an inner-city setting. Mindfulness meditation is defined, and the practices of breathing meditation, eating meditation, walking meditation, and mindful yoga are described. Data analysis examined compliance, medical and psychologic symptom reduction, and changes in self-esteem, of English- and Spanish-speaking patients who completed the 8-week Stress Reduction and Relaxation Program at the Community Health Center in Meriden, Conn. Statistically significant decreases in medical and psychologic symptoms and improvement in self-esteem were found. Many program completers reported dramatic changes in attitudes, beliefs, habits, and behaviors. Despite the limitations of the research design, these findings suggest that a mindfulness meditation course can be an effective health care intervention when utilized by English- and Spanish-speaking patients in an inner-city community health center. The article includes a discussion of factors to be considered when establishing a mindfulness meditation-based stress reduction program in a health care setting.

Evaluation of a family-centered prevention intervention for military children and families facing wartime deployments.

PubMed

Lester, Patricia; Saltzman, William R; Woodward, Kirsten; Glover, Dorie; Leskin, Gregory A; Bursch, Brenda; Pynoos, Robert; Beardslee, William

2012-03-01

We evaluated the Families OverComing Under Stress program, which provides resiliency training designed to enhance family psychological health in US military families affected by combat- and deployment-related stress. We performed a secondary analysis of Families OverComing Under Stress program evaluation data that was collected between July 2008 and February 2010 at 11 military installations in the United States and Japan. We present data at baseline for 488 unique families (742 parents and 873 children) and pre-post outcomes for 331 families. Family members reported high levels of satisfaction with the program and positive impact on parent-child indicators. Psychological distress levels were elevated for service members, civilian parents, and children at program entry compared with community norms. Change scores showed significant improvements across all measures for service member and civilian parents and their children (P < .001). Evaluation data provided preliminary support for a strength-based, trauma-informed military family prevention program to promote resiliency and mitigate the impact of wartime deployment stress.

Effect of a supportive-educative program in the math class for stress, anxiety, and depression in female students in the third level of junior high school: An action research

PubMed Central

Emamjomeh, Seyedeh Mahtab; Bahrami, Masoud

2015-01-01

Background and Aim: Students in junior high school, particularly in the third level, are prone to a variety of stressors. This in turn might lead to stress, anxiety, depression, and other health-related problems. There are a very limited number of action research studies to identify the effect of stress management techniques among students. Therefore, a study was conducted to assess the effect of a program used in the math class to decrease the student's level of stress, anxiety, and depression. Material and Methods: This was an action research study, which was conducted in region three of the Education and Training Office of Isfahan, in the year 2012. Fifty-one students in a junior high school were selected and underwent a comprehensive stress management program. This program was prepared in collaboration with the students, their parents, teachers, and managers of the school, and was implemented approximately during a four-month period. The student's stress, anxiety, and depression were measured before and after the program using the DASS-21 questionnaire. Findings: The t-test identified that the mean scores of stress, anxiety, and depression after the intervention were significantly lower than the corresponding scores before the program. One-way analysis of variance (ANOVA) also showed that the students from the veterans (Janbaz) families had higher levels of stress compared to their classmates, who belonged to the non-veteran families (P< 0.05). Results: Education and implementation of stress management techniques including cognitive and behavioral interventions along with active and collaborative methods of learning in the math class might be useful both inside and outside the class, for better management of stress and other health-related problems of students. PMID:25767821

Effect of a supportive-educative program in the math class for stress, anxiety, and depression in female students in the third level of junior high school: An action research.

PubMed

Emamjomeh, Seyedeh Mahtab; Bahrami, Masoud

2015-01-01

Students in junior high school, particularly in the third level, are prone to a variety of stressors. This in turn might lead to stress, anxiety, depression, and other health-related problems. There are a very limited number of action research studies to identify the effect of stress management techniques among students. Therefore, a study was conducted to assess the effect of a program used in the math class to decrease the student's level of stress, anxiety, and depression. This was an action research study, which was conducted in region three of the Education and Training Office of Isfahan, in the year 2012. Fifty-one students in a junior high school were selected and underwent a comprehensive stress management program. This program was prepared in collaboration with the students, their parents, teachers, and managers of the school, and was implemented approximately during a four-month period. The student's stress, anxiety, and depression were measured before and after the program using the DASS-21 questionnaire. The t-test identified that the mean scores of stress, anxiety, and depression after the intervention were significantly lower than the corresponding scores before the program. One-way analysis of variance (ANOVA) also showed that the students from the veterans (Janbaz) families had higher levels of stress compared to their classmates, who belonged to the non-veteran families (P< 0.05). Education and implementation of stress management techniques including cognitive and behavioral interventions along with active and collaborative methods of learning in the math class might be useful both inside and outside the class, for better management of stress and other health-related problems of students.

Reducing Nurses’ Stress: A Randomized Controlled Trial of a Web-Based Stress Management Program for Nurses

PubMed Central

Hersch, Rebekah K.; Cook, Royer F.; Deitz, Diane K.; Kaplan, Seth; Hughes, Daniel; Friesen, Mary Ann; Vezina, Maria

2016-01-01

Background Nursing is a notoriously high-stress occupation emotionally taxing and physically draining, with a high incidence of burnout. In addition to the damaging effects of stress on nurses’ health and well being, stress is also a major contributor to attrition and widespread shortages in the nursing profession. Although there exist promising in-person interventions for addressing the problem of stress among nurses, the experience of our group across multiple projects in hospitals has indicated that the schedules and workloads of nurses can pose problems for implementing in-person interventions, and that web-based interventions might be ideally suited to addressing the high levels of stress among nurses. Purpose The purpose of this study was to evaluate the effectiveness of the web-based BREATHE: Stress Management for Nurses program. Methods The randomized controlled trial was conducted with 104 nurses in five hospitals in Virginia and one hospital in New York. The primary outcome measure was perceived nursing-related stress. Secondary measures included symptoms of distress, coping, work limitations, job satisfaction, use of substances to relieve stress, alcohol consumption, and understanding depression and anxiety. Results Program group participants experienced significantly greater reductions than the control group on the full Nursing Stress Scale, and six of the seven subscales. No other significant results were found. Moderator analysis found that nurses with greater experience benefitted more. Conclusion Using a web-based program holds tremendous promise for providing nurses with the tools they need to address nursing related stress. PMID:27969025

Three-dimensional Stress Analysis Using the Boundary Element Method

NASA Technical Reports Server (NTRS)

Wilson, R. B.; Banerjee, P. K.

1984-01-01

The boundary element method is to be extended (as part of the NASA Inelastic Analysis Methods program) to the three-dimensional stress analysis of gas turbine engine hot section components. The analytical basis of the method (as developed in elasticity) is outlined, its numerical implementation is summarized, and the approaches to be followed in extending the method to include inelastic material response indicated.

A school-based health promotion program for stressed nursing students in Taiwan.

PubMed

Hsieh, Pei-Lin

2011-09-01

: Nursing students face both clinical and academic stress. Extensive theoretical and research literature suggests that peer support and regular exercise are critically important and can efficiently manage stress for nursing students. : The purpose of this study was to investigate the effect of a school-based health promotion program in a group physical activity intervention and peer support program for stressed nursing students. : This study used a quasi-experimental design to collect information and collected data from a stress questionnaire, semistructured questionnaire, and group discussion. Participants included 77 nursing students at an institute of technology in northern Taiwan. Participants were randomly assigned into experimental (n = 37) and control (n = 40) groups. Program duration was 16 weeks. Participants were selected based on their assessment results as having moderate or severe levels of stress. All participants in the experimental group took part in a group physical activity for 30 minutes three times a week. Eight weeks later, the researcher invited each group to discuss their feelings and stress coping strategies. Both groups completed pretest and posttest stress questionnaires. Quantitative data were analyzed using SPSS 14.0 Statistical Package for Windows, and qualitative data from each group discussion were analyzed using content analysis. : Results revealed that level of stress was statistically decreased in the experimental group. Posttest stress levels were significantly different in experimental and control groups. The results suggested that students who participated in the intervention had less stress than did those in the control group after the intervention. Those in the experimental group held positive views of peer support and physical activity. : The results of this study confirmed the efficacy of school-based health promotion programs in reducing stress in nursing students. Findings may provide educators with information to assist their developing effective health promotion programs to manage stress for their students. This study can also help students develop personal coping strategies through physical activity and peer support.

Exploring and reducing stress in young restaurant workers: results of a randomized field trial.

PubMed

Petree, Robyn D; Broome, Kirk M; Bennett, Joel B

2012-01-01

Young adult restaurant workers face the dual stressors of work adjustment and managing personal responsibilities. We assessed a new psychosocial/health promotion training designed to reduce these stressors in the context of restaurant work. DESIGN . A cluster-randomized trial of a training program, with surveys administered approximately 2 weeks before training and both 6 and 12 months after training. A national restaurant chain. A total of 947 restaurant workers in 28 restaurants. Personal stress, exposure to problem coworkers, and personal and job characteristics. Team Resilience (TR) is an interactive program for stress management, teamwork, and work-life balance. TR focuses on "five Cs" of resilience: compassion, commitment, centering, community, and confidence. ANALYSIS . Mixed-model (multilevel) analysis of covariances. Compared with workers in control stores, workers in TR-trained stores showed significant reductions over time in exposure to problem coworkers (F[2, 80.60]  =  4.48; p  =  .01) and in personal stress (F[2, 75.28]  =  6.12; p  =  .003). The TR program may help young workers who face the challenges of emerging adulthood and work-life balance.

Bearing tester data compilation, analysis, and reporting and bearing math modeling

NASA Technical Reports Server (NTRS)

1983-01-01

The Shaberth bearing analysis computer program was developed for the analysis of jet engine shaft/bearing systems operating above room temperature with normal hydrocarbon lubricants. It is also possible to use this tool to evaluate the shaft bearing systems operating in cryogenics. Effects such as fluid drag, radial temperature gradients, outer race misalignments and clearance changes were simulated and evaluated. In addition, the speed and preload effects on bearing radial stiffness was evaluated. The Shaberth program was also used to provide contact stresses from which contact geometry was calculated to support other analyses such as the determination of cryogenic fluid film thickness in the contacts and evaluation of surface and subsurface stresses necessary for bearing failure evaluation. This program was a vital tool for the thermal analysis of the bearing in that it provides the heat generation rates at the rolling element/race contacts for input into a thermal model of the bearing/shaft assembly.

An automated data management/analysis system for space shuttle orbiter tiles. [stress analysis

NASA Technical Reports Server (NTRS)

Giles, G. L.; Ballas, M.

1982-01-01

An engineering data management system was combined with a nonlinear stress analysis program to provide a capability for analyzing a large number of tiles on the space shuttle orbiter. Tile geometry data and all data necessary of define the tile loads environment accessed automatically as needed for the analysis of a particular tile or a set of tiles. User documentation provided includes: (1) description of computer programs and data files contained in the system; (2) definitions of all engineering data stored in the data base; (3) characteristics of the tile anaytical model; (4) instructions for preparation of user input; and (5) a sample problem to illustrate use of the system. Description of data, computer programs, and analytical models of the tile are sufficiently detailed to guide extension of the system to include additional zones of tiles and/or additional types of analyses

Programming stress-induced altruistic death in engineered bacteria

PubMed Central

Tanouchi, Yu; Pai, Anand; Buchler, Nicolas E; You, Lingchong

2012-01-01

Programmed death is often associated with a bacterial stress response. This behavior appears paradoxical, as it offers no benefit to the individual. This paradox can be explained if the death is ‘altruistic': the killing of some cells can benefit the survivors through release of ‘public goods'. However, the conditions where bacterial programmed death becomes advantageous have not been unambiguously demonstrated experimentally. Here, we determined such conditions by engineering tunable, stress-induced altruistic death in the bacterium Escherichia coli. Using a mathematical model, we predicted the existence of an optimal programmed death rate that maximizes population growth under stress. We further predicted that altruistic death could generate the ‘Eagle effect', a counter-intuitive phenomenon where bacteria appear to grow better when treated with higher antibiotic concentrations. In support of these modeling insights, we experimentally demonstrated both the optimality in programmed death rate and the Eagle effect using our engineered system. Our findings fill a critical conceptual gap in the analysis of the evolution of bacterial programmed death, and have implications for a design of antibiotic treatment. PMID:23169002

Stress analyses of B-52 pylon hooks

NASA Technical Reports Server (NTRS)

Ko, W. L.; Schuster, L. S.

1985-01-01

The NASTRAN finite element computer program was used in the two dimensional stress analysis of B-52 carrier aircraft pylon hooks: (1) old rear hook (which failed), (2) new rear hook (improved geometry), (3) new DAST rear hook (derated geometry), and (4) front hook. NASTRAN model meshes were generated by the aid of PATRAN-G computer program. Brittle limit loads for all the four hooks were established. The critical stress level calculated from NASTRAN agrees reasonably well with the values predicted from the fracture mechanics for the failed old rear hook.

Effect of hybrid layer on stress distribution in a premolar tooth restored with composite or ceramic inlay: an FEM study.

PubMed

Belli, Sema; Eskitaşcioglu, Gürcan; Eraslan, Oguz; Senawongse, Pisol; Tagami, Junji

2005-08-01

The aim of this finite elemental stress analysis study was to evaluate the effect of hybrid layer on distribution and amount of stress formed under occlusal loading in a premolar tooth restored with composite or ceramic inlay. The mandibular premolar tooth was selected as the model based on the anatomical measurements suggested by Wheeler. The analysis is performed by using a Pentium II IBM compatible computer with the SAP 2000 structural analysis program. Four different mathematical models including the following structures were evaluated: 1) composite inlay, adhesive resin, and tooth structure; 2) composite inlay, adhesive resin, hybrid layer, and tooth structure; 3) ceramic inlay, adhesive resin, and tooth structure; 4) ceramic inlay, adhesive resin, hybrid layer, and tooth structure. Loading was applied from the occlusal surface of the restoration, and shear stresses under loading were evaluated. The findings were drawn by the Saplot program, and the results were analyzed by graphical comparison method. The output indicated that the hybrid layer acts as a stress absorber in models 2 and 4. The hybrid layer has also changed mathematical values of stress on cavity floors in both restoration types. Ceramic inlay collected the stress inside the body of the material, but the composite inlay directly transferred the stress through dental tissues. As a result, it was concluded that the hybrid layer has an effect on stress distribution under loading in a premolar tooth model restored with composite or ceramic inlay. Copyright 2005 Wiley Periodicals, Inc.

ICAN: Integrated composites analyzer

NASA Technical Reports Server (NTRS)

Murthy, P. L. N.; Chamis, C. C.

1984-01-01

The ICAN computer program performs all the essential aspects of mechanics/analysis/design of multilayered fiber composites. Modular, open-ended and user friendly, the program can handle a variety of composite systems having one type of fiber and one matrix as constituents as well as intraply and interply hybrid composite systems. It can also simulate isotropic layers by considering a primary composite system with negligible fiber volume content. This feature is specifically useful in modeling thin interply matrix layers. Hygrothermal conditions and various combinations of in-plane and bending loads can also be considered. Usage of this code is illustrated with a sample input and the generated output. Some key features of output are stress concentration factors around a circular hole, locations of probable delamination, a summary of the laminate failure stress analysis, free edge stresses, microstresses and ply stress/strain influence coefficients. These features make ICAN a powerful, cost-effective tool to analyze/design fiber composite structures and components.

Stress among healthcare students--a cross disciplinary perspective.

PubMed

Jacob, Tamar; Itzchak, Esther Ben; Raz, Olga

2013-07-01

Perceived stress (PS) among healthcare students worldwide is a recognized problem. To address the paucity of data about the actual degree of PS, this study aimed to: 1) evaluate and compare PS across three healthcare programs (Physical Therapy [PT], Communication Disorders [CD], and Nutrition Sciences [NS]) in one university; 2) evaluate changes in PS across study years; 3) identify the contribution of academic- and socio-demographic-related variables to PS; and 4) determine whether the Israeli students' PS levels differ from those of their peers in other countries. A cross-sectional survey was performed among all undergraduate PT, CD, and NS students from one university. Data were collected using anonymous questionnaires. Instruments included the Perceived Stress Scale 10 (PSS) and the Undergraduate Sources of Stress (USOS). ANOVA was used to evaluate the differences between the three programs, and regression analysis to evaluate the contribution of socio-demographic factors to PS and USOS. A total of 312 students (PT--154; CD--92; NS--66) participated in the study. Mean PSS (range: 13.5-13.6) was similar in the three programs. The USOS academic factor was the most reported source of stress in all programs. Most socio-demographic variables were not related to either PS or USOS. Students from PT, CD, and NS programs perceived similar levels of stress. The academic factor was perceived as the most important source of stress by students from the three departments, despite differences in the academic educational programs. Further studies are needed to generalize these results and enable a comparison between healthcare students and other students' stress perceptions.

3-D inelastic analysis methods for hot section components (base program). [turbine blades, turbine vanes, and combustor liners

NASA Technical Reports Server (NTRS)

Wilson, R. B.; Bak, M. J.; Nakazawa, S.; Banerjee, P. K.

1984-01-01

A 3-D inelastic analysis methods program consists of a series of computer codes embodying a progression of mathematical models (mechanics of materials, special finite element, boundary element) for streamlined analysis of combustor liners, turbine blades, and turbine vanes. These models address the effects of high temperatures and thermal/mechanical loadings on the local (stress/strain) and global (dynamics, buckling) structural behavior of the three selected components. These models are used to solve 3-D inelastic problems using linear approximations in the sense that stresses/strains and temperatures in generic modeling regions are linear functions of the spatial coordinates, and solution increments for load, temperature and/or time are extrapolated linearly from previous information. Three linear formulation computer codes, referred to as MOMM (Mechanics of Materials Model), MHOST (MARC-Hot Section Technology), and BEST (Boundary Element Stress Technology), were developed and are described.

A Yoga Intervention Program for Patients Suffering from Symptoms of Posttraumatic Stress Disorder: A Qualitative Descriptive Study.

PubMed

Jindani, Farah A; Khalsa, G F S

2015-07-01

To understand how individuals with symptoms of posttraumatic stress disorder (PTSD) perceive a trauma-sensitive Kundalini yoga (KY) program. Digitally recorded telephone interviews 30-60 minutes in duration were conducted with 40 individuals with PTSD participating in an 8-week KY treatment program. Interviews were transcribed verbatim and analyzed using qualitative thematic analysis techniques. Qualitative analysis identifies three major themes: self-observed changes, new awareness, and the yoga program itself. Findings suggest that participants noted changes in areas of health and well-being, lifestyle, psychosocial integration, and perceptions of self in relation to the world. Presented are practical suggestions for trauma-related programming. There is a need to consider alternative and potentially empowering approaches to trauma treatment. Yoga-related self-care or self-management strategies are widely accessible, are empowering, and may address the mind-body elements of PTSD.

SCARE: A post-processor program to MSC/NASTRAN for the reliability analysis of structural ceramic components

NASA Technical Reports Server (NTRS)

Gyekenyesi, J. P.

1985-01-01

A computer program was developed for calculating the statistical fast fracture reliability and failure probability of ceramic components. The program includes the two-parameter Weibull material fracture strength distribution model, using the principle of independent action for polyaxial stress states and Batdorf's shear-sensitive as well as shear-insensitive crack theories, all for volume distributed flaws in macroscopically isotropic solids. Both penny-shaped cracks and Griffith cracks are included in the Batdorf shear-sensitive crack response calculations, using Griffith's maximum tensile stress or critical coplanar strain energy release rate criteria to predict mixed mode fracture. Weibull material parameters can also be calculated from modulus of rupture bar tests, using the least squares method with known specimen geometry and fracture data. The reliability prediction analysis uses MSC/NASTRAN stress, temperature and volume output, obtained from the use of three-dimensional, quadratic, isoparametric, or axisymmetric finite elements. The statistical fast fracture theories employed, along with selected input and output formats and options, are summarized. An example problem to demonstrate various features of the program is included.

Environmental Technician Training in the United Kingdom.

ERIC Educational Resources Information Center

Potter, John F.

1985-01-01

Stresses the need for qualified environmental science technicians and for training courses in this area. Provides program information and statistical summarization of a national diploma program for environmental technicians titled "Business and Technician Education Council." Reviews the program areas of environmental analysis and…

Cyclic stress analysis of an air-cooled turbine vane

NASA Technical Reports Server (NTRS)

Kaufman, A.; Gauntner, D. J.; Gauntner, J. W.

1975-01-01

The effects of gas pressure level, coolant temperature, and coolant flow rate on the stress-strain history and life of an air-cooled vane were analyzed using measured and calculated transient metal temperatures and a turbine blade stress analysis program. Predicted failure locations were compared to results from cyclic tests in a static cascade and engine. The results indicate that a high gas pressure was detrimental, a high coolant flow rate somewhat beneficial, and a low coolant temperature the most beneficial to vane life.

A Computer Code for Dynamic Stress Analysis of Media-Structure Problems with Nonlinearities (SAMSON). Volume III. User’s Manual.

DTIC Science & Technology

NONLINEAR SYSTEMS, LINEAR SYSTEMS, SUBROUTINES , SOIL MECHANICS, INTERFACES, DYNAMICS, LOADS(FORCES), FORCE(MECHANICS), DAMPING, ACCELERATION, ELASTIC...PROPERTIES, PLASTIC PROPERTIES, CRACKS , REINFORCING MATERIALS , COMPOSITE MATERIALS , FAILURE(MECHANICS), MECHANICAL PROPERTIES, INSTRUCTION MANUALS, DIGITAL COMPUTERS...STRESSES, *COMPUTER PROGRAMS), (*STRUCTURES, STRESSES), (*DATA PROCESSING, STRUCTURAL PROPERTIES), SOILS , STRAIN(MECHANICS), MATHEMATICAL MODELS

Transistor step stress program for JANTX2N4150

NASA Technical Reports Server (NTRS)

1979-01-01

Reliability analysis of the transistor JANTX2N4150 manufactured by General Semiconductor and Transitron is reported. The discrete devices were subjected to power and temperature step stress tests and then to electrical tests after completing the power/temperature step stress point. Control sample units were maintained for verification of the electrical parametric testing. Results are presented.

ZIP2DL: An Elastic-Plastic, Large-Rotation Finite-Element Stress Analysis and Crack-Growth Simulation Program

NASA Technical Reports Server (NTRS)

Deng, Xiaomin; Newman, James C., Jr.

1997-01-01

ZIP2DL is a two-dimensional, elastic-plastic finte element program for stress analysis and crack growth simulations, developed for the NASA Langley Research Center. It has many of the salient features of the ZIP2D program. For example, ZIP2DL contains five material models (linearly elastic, elastic-perfectly plastic, power-law hardening, linear hardening, and multi-linear hardening models), and it can simulate mixed-mode crack growth for prescribed crack growth paths under plane stress, plane strain and mixed state of stress conditions. Further, as an extension of ZIP2D, it also includes a number of new capabilities. The large-deformation kinematics in ZIP2DL will allow it to handle elastic problems with large strains and large rotations, and elastic-plastic problems with small strains and large rotations. Loading conditions in terms of surface traction, concentrated load, and nodal displacement can be applied with a default linear time dependence or they can be programmed according to a user-defined time dependence through a user subroutine. The restart capability of ZIP2DL will make it possible to stop the execution of the program at any time, analyze the results and/or modify execution options and resume and continue the execution of the program. This report includes three sectons: a theoretical manual section, a user manual section, and an example manual secton. In the theoretical secton, the mathematics behind the various aspects of the program are concisely outlined. In the user manual section, a line-by-line explanation of the input data is given. In the example manual secton, three types of examples are presented to demonstrate the accuracy and illustrate the use of this program.

Perceived Stress and Use of Coping Strategies as a Response to Rapidly Changing Student Demographics

ERIC Educational Resources Information Center

Lindner, Reinhard W.; Healy, Donald E., Jr.

2004-01-01

The authors present findings from an initial information gathering and analysis of a larger Office of Special Education Programs model demonstration project, "Connections to Success." The article is based on an analysis of a teacher survey conducted at four schools in the project's partner district focused on perceived problems, sources of stress,…

Stress analysis of ribbon parachutes

NASA Technical Reports Server (NTRS)

Reynolds, D. T.; Mullins, W. M.

1975-01-01

An analytical method has been developed for determining the internal load distribution for ribbon parachutes subjected to known riser and aerodynamic forces. Finite elements with non-linear elastic properties represent the parachute structure. This method is an extension of the analysis previously developed by the authors and implemented in the digital computer program CANO. The present analysis accounts for the effect of vertical ribbons in the solution for canopy shape and stress distribution. Parametric results are presented which relate the canopy stress distribution to such factors as vertical ribbon strength, number of gores, and gore shape in a ribbon parachute.

Evaluation of a Family-Centered Prevention Intervention for Military Children and Families Facing Wartime Deployments

PubMed Central

Saltzman, William R.; Woodward, Kirsten; Glover, Dorie; Leskin, Gregory A.; Bursch, Brenda; Pynoos, Robert; Beardslee, William

2012-01-01

Objectives. We evaluated the Families OverComing Under Stress program, which provides resiliency training designed to enhance family psychological health in US military families affected by combat- and deployment-related stress. Methods. We performed a secondary analysis of Families OverComing Under Stress program evaluation data that was collected between July 2008 and February 2010 at 11 military installations in the United States and Japan. We present data at baseline for 488 unique families (742 parents and 873 children) and pre–post outcomes for 331 families. Results. Family members reported high levels of satisfaction with the program and positive impact on parent–child indicators. Psychological distress levels were elevated for service members, civilian parents, and children at program entry compared with community norms. Change scores showed significant improvements across all measures for service member and civilian parents and their children (P < .001). Conclusions. Evaluation data provided preliminary support for a strength-based, trauma-informed military family prevention program to promote resiliency and mitigate the impact of wartime deployment stress. PMID:22033756

Loading tests of a wing structure for a hypersonic aircraft

NASA Technical Reports Server (NTRS)

Fields, R. A.; Reardon, L. F.; Siegel, W. H.

1980-01-01

Room-temperature loading tests were conducted on a wing structure designed with a beaded panel concept for a Mach 8 hypersonic research airplane. Strain, stress, and deflection data were compared with the results of three finite-element structural analysis computer programs and with design data. The test program data were used to evaluate the structural concept and the methods of analysis used in the design. A force stiffness technique was utilized in conjunction with load conditions which produced various combinations of panel shear and compression loading to determine the failure envelope of the buckling critical beaded panels The force-stiffness data did not result in any predictions of buckling failure. It was, therefore, concluded that the panels were conservatively designed as a result of design constraints and assumptions of panel eccentricities. The analysis programs calculated strains and stresses competently. Comparisons between calculated and measured structural deflections showed good agreement. The test program offered a positive demonstration of the beaded panel concept subjected to room-temperature load conditions.

Community-Based Mindfulness Program for Disease Prevention and Health Promotion: Targeting Stress Reduction.

PubMed

Galla, Brian M; O'Reilly, Gillian A; Kitil, M Jennifer; Smalley, Susan L; Black, David S

2015-01-01

Poorly managed stress leads to detrimental physical and psychological consequences that have implications for individual and community health. Evidence indicates that U.S. adults predominantly use unhealthy strategies for stress management. This study examines the impact of a community-based mindfulness training program on stress reduction. This study used a one-group pretest-posttest design. The study took place at the UCLA Mindful Awareness Research Center in urban Los Angeles. A sample of N = 127 community residents (84% Caucasian, 74% female) were included in the study. Participants received mindfulness training through the Mindful Awareness Practices (MAPs) for Daily Living I. Mindfulness, self-compassion, and perceived stress were measured at baseline and postintervention. Paired-sample t-tests were used to test for changes in outcome measures from baseline to postintervention. Hierarchical regression analysis was fit to examine whether change in self-reported mindfulness and self-compassion predicted postintervention perceived stress scores. There were statistically significant improvements in self-reported mindfulness (t = -10.67, p < .001, d = .90), self-compassion (t = -8.50, p < .001, d = .62), and perceived stress (t = 9.28, p < .001, d = -.78) at postintervention. Change in self-compassion predicted postintervention perceived stress (β = -.44, t = -5.06, p < .001), but change in mindfulness did not predict postintervention perceived stress (β = -.04, t = -.41, p = .68). These results indicate that a community-based mindfulness training program can lead to reduced levels of psychological stress. Mindfulness training programs such as MAPs may offer a promising approach for general public health promotion through improving stress management in the urban community.

Purdue Plane Structures Analyzer II : a computerized wood engineering system

Treesearch

S. K. Suddarth; R. W. Wolfe

1984-01-01

The Purdue Plane Structures Analyzer (PPSA) is a computer program developed specifically for the analysis of wood structures. It uses recognized analysis procedures, in conjunction with recommendations of the 1982 National Design Specification for Wood Construction, to determine stresses and deflections of wood trusses and frames. The program offers several options for...

Modal analysis and dynamic stresses for acoustically excited shuttle insulation tiles

NASA Technical Reports Server (NTRS)

Ojalvo, I. U.; Ogilvie, P. L.

1975-01-01

Improvements and extensions to the RESIST computer program developed for determining the normalized modal stress response of shuttle insulation tiles are described. The new version of RESIST can accommodate primary structure panels with closed-cell stringers, in addition to the capability for treating open-cell stringers. In addition, the present version of RESIST numerically solves vibration problems several times faster than its predecessor. A new digital computer program, titled ARREST (Acoustic Response of Reusable Shuttle Tiles) is also described. Starting with modal information contained on output tapes from RESIST computer runs, ARREST determines RMS stresses, deflections and accelerations of shuttle panels with reusable surface insulation tiles. Both programs are applicable to stringer stiffened structural panels with or without reusable surface insulation titles.

Sources of stress for students in high school college preparatory and general education programs: group differences and associations with adjustment.

PubMed

Suldo, Shannon M; Shaunessy, Elizabeth; Thalji, Amanda; Michalowski, Jessica; Shaffer, Emily

2009-01-01

Navigating puberty while developing independent living skills may render adolescents particularly vulnerable to stress, which may ultimately contribute to mental health problems (Compas, Orosan, & Grant, 1993; Elgar, Arlett, & Groves, 2003). The academic transition to high school presents additional challenges as youth are required to interact with a new and larger peer group and manage greater academic expectations. For students enrolled in academically rigorous college preparatory programs, such as the International Baccalaureate (IB) program, the amount of stress perceived may be greater than typical (Suldo, Shaunessy, & Hardesty, 2008). This study investigated the environmental stressors and psychological adjustment of 162 students participating in the IB program and a comparison sample of 157 students in general education. Factor analysis indicated students experience 7 primary categories of stressors, which were examined in relation to students' adjustment specific to academic and psychological functioning. The primary source of stress experienced by IB students was related to academic requirements. In contrast, students in the general education program indicated higher levels of stressors associated with parent-child relations, academic struggles, conflict within family, and peer relations, as well as role transitions and societal problems. Comparisons of correlations between categories of stressors and students' adjustment by curriculum group reveal that students in the IB program reported more symptoms of psychopathology and reduced academic functioning as they experienced higher levels of stress, particularly stressors associated with academic requirements, transitions and societal problems, academic struggles, and extra-curricular activities. Applied implications stem from findings suggesting that students in college preparatory programs are more likely to (a) experience elevated stress related to academic demands as opposed to more typical adolescent concerns, and (b) manifest worse outcomes in the face of stress.

Analysis of Compton continuum measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gold, R.; Olson, I. K.

1970-01-01

Five computer programs: COMPSCAT, FEND, GABCO, DOSE, and COMPLOT, have been developed and used for the analysis and subsequent reduction of measured energy distributions of Compton recoil electrons to continuous gamma spectra. In addition to detailed descriptions of these computer programs, the relationship amongst these codes is stressed. The manner in which these programs function is illustrated by tracing a sample measurement through a complete cycle of the data-reduction process.

Cost-Benefit Analysis of a Support Program for Nursing Staff.

PubMed

Moran, Dane; Wu, Albert W; Connors, Cheryl; Chappidi, Meera R; Sreedhara, Sushama K; Selter, Jessica H; Padula, William V

2017-04-27

A peer-support program called Resilience In Stressful Events (RISE) was designed to help hospital staff cope with stressful patient-related events. The aim of this study was to evaluate the impact of the RISE program by conducting an economic evaluation of its cost benefit. A Markov model with a 1-year time horizon was developed to compare the cost benefit with and without the RISE program from a provider (hospital) perspective. Nursing staff who used the RISE program between 2015 and 2016 at a 1000-bed, private hospital in the United States were included in the analysis. The cost of running the RISE program, nurse turnover, and nurse time off were modeled. Data on costs were obtained from literature review and hospital data. Probabilities of quitting or taking time off with or without the RISE program were estimated using survey data. Net monetary benefit (NMB) and budget impact of having the RISE program were computed to determine cost benefit to the hospital. Expected model results of the RISE program found a net monetary benefit savings of US $22,576.05 per nurse who initiated a RISE call. These savings were determined to be 99.9% consistent on the basis of a probabilistic sensitivity analysis. The budget impact analysis revealed that a hospital could save US $1.81 million each year because of the RISE program. The RISE program resulted in substantial cost savings to the hospital. Hospitals should be encouraged by these findings to implement institution-wide support programs for medical staff, based on a high demand for this type of service and the potential for cost savings.

Effect of a stress management program on subjects with neck pain: A pilot randomized controlled trial.

PubMed

Metikaridis, T Damianos; Hadjipavlou, Alexander; Artemiadis, Artemios; Chrousos, George; Darviri, Christina

2016-05-20

Studies have shown that stress is implicated in the cause of neck pain (NP). The purpose of this study is to examine the effect of a simple, zero cost stress management program on patients suffering from NP. This study is a parallel-type randomized clinical study. People suffering from chronic non-specific NP were chosen randomly to participate in an eight week duration program of stress management (N= 28) (including diaphragmatic breathing, progressive muscle relaxation) or in a no intervention control condition (N= 25). Self-report measures were used for the evaluation of various variables at the beginning and at the end of the eight-week monitoring period. Descriptive and inferential statistic methods were used for the statistical analysis. At the end of the monitoring period, the intervention group showed a statistically significant reduction of stress and anxiety (p= 0.03, p= 0.01), report of stress related symptoms (p= 0.003), percentage of disability due to NP (p= 0.000) and NP intensity (p= 0.002). At the same time, daily routine satisfaction levels were elevated (p= 0.019). No statistically significant difference was observed in cortisol measurements. Stress management has positive effects on NP patients.

Structural design and stress analysis program for advanced composite filament-wound axisymmetric pressure vessels (COMTANK)

NASA Technical Reports Server (NTRS)

Knoell, A. C.

1972-01-01

Computer program has been specifically developed to handle, in an efficient and cost effective manner, planar wound pressure vessels fabricated of either boron-epoxy or graphite-epoxy advanced composite materials.

Lifetime Reliability Evaluation of Structural Ceramic Parts with the CARES/LIFE Computer Program

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Powers, Lynn M.; Janosik, Lesley A.; Gyekenyesi, John P.

1993-01-01

The computer program CARES/LIFE calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/or proof test loading. This program is an extension of the CARES (Ceramics Analysis and Reliability Evaluation of Structures) computer program. CARES/LIFE accounts for the phenomenon of subcritical crack growth (SCG) by utilizing the power law, Paris law, or Walker equation. The two-parameter Weibull cumulative distribution function is used to characterize the variation in component strength. The effects of multiaxial stresses are modeled using either the principle of independent action (PIA), Weibull's normal stress averaging method (NSA), or Batdorf's theory. Inert strength and fatigue parameters are estimated from rupture strength data of naturally flawed specimens loaded in static, dynamic, or cyclic fatigue. Two example problems demonstrating cyclic fatigue parameter estimation and component reliability analysis with proof testing are included.

Aircraft stress sequence development: A complex engineering process made simple

NASA Technical Reports Server (NTRS)

Schrader, K. H.; Butts, D. G.; Sparks, W. A.

1994-01-01

Development of stress sequences for critical aircraft structure requires flight measured usage data, known aircraft loads, and established relationships between aircraft flight loads and structural stresses. Resulting cycle-by-cycle stress sequences can be directly usable for crack growth analysis and coupon spectra tests. Often, an expert in loads and spectra development manipulates the usage data into a typical sequence of representative flight conditions for which loads and stresses are calculated. For a fighter/trainer type aircraft, this effort is repeated many times for each of the fatigue critical locations (FCL) resulting in expenditure of numerous engineering hours. The Aircraft Stress Sequence Computer Program (ACSTRSEQ), developed by Southwest Research Institute under contract to San Antonio Air Logistics Center, presents a unique approach for making complex technical computations in a simple, easy to use method. The program is written in Microsoft Visual Basic for the Microsoft Windows environment.

Gear crack propagation investigations

NASA Technical Reports Server (NTRS)

Lewicki, David G.; Ballarini, Roberto

1996-01-01

Analytical and experimental studies were performed to investigate the effect of gear rim thickness on crack propagation life. The FRANC (FRacture ANalysis Code) computer program was used to simulate crack propagation. The FRANC program used principles of linear elastic fracture mechanics, finite element modeling, and a unique re-meshing scheme to determine crack tip stress distributions, estimate stress intensity factors, and model crack propagation. Various fatigue crack growth models were used to estimate crack propagation life based on the calculated stress intensity factors. Experimental tests were performed in a gear fatigue rig to validate predicted crack propagation results. Test gears were installed with special crack propagation gages in the tooth fillet region to measure bending fatigue crack growth. Good correlation between predicted and measured crack growth was achieved when the fatigue crack closure concept was introduced into the analysis. As the gear rim thickness decreased, the compressive cyclic stress in the gear tooth fillet region increased. This retarded crack growth and increased the number of crack propagation cycles to failure.

Time-dependent reliability analysis of ceramic engine components

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.

1993-01-01

The computer program CARES/LIFE calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/or proof test loading. This program is an extension of the CARES (Ceramics Analysis and Reliability Evaluation of Structures) computer program. CARES/LIFE accounts for the phenomenon of subcritical crack growth (SCG) by utilizing either the power or Paris law relations. The two-parameter Weibull cumulative distribution function is used to characterize the variation in component strength. The effects of multiaxial stresses are modeled using either the principle of independent action (PIA), the Weibull normal stress averaging method (NSA), or the Batdorf theory. Inert strength and fatigue parameters are estimated from rupture strength data of naturally flawed specimens loaded in static, dynamic, or cyclic fatigue. Two example problems demonstrating proof testing and fatigue parameter estimation are given.

Proposed method for determining the thickness of glass in solar collector panels

NASA Technical Reports Server (NTRS)

Moore, D. M.

1980-01-01

An analytical method was developed for determining the minimum thickness for simply supported, rectangular glass plates subjected to uniform normal pressure environmental loads such as wind, earthquake, snow, and deadweight. The method consists of comparing an analytical prediction of the stress in the glass panel to a glass breakage stress determined from fracture mechanics considerations. Based on extensive analysis using the nonlinear finite element structural analysis program ARGUS, design curves for the structural analysis of simply supported rectangular plates were developed. These curves yield the center deflection, center stress and corner stress as a function of a dimensionless parameter describing the load intensity. A method of estimating the glass breakage stress as a function of a specified failure rate, degree of glass temper, design life, load duration time, and panel size is also presented.

An exploratory investigation of weight estimation techniques for hypersonic flight vehicles

NASA Technical Reports Server (NTRS)

Cook, E. L.

1981-01-01

The three basic methods of weight prediction (fixed-fraction, statistical correlation, and point stress analysis) and some of the computer programs that have been developed to implement them are discussed. A modified version of the WAATS (Weights Analysis of Advanced Transportation Systems) program is presented, along with input data forms and an example problem.

Burner liner thermal/structural load modeling: TRANCITS program user's manual

NASA Technical Reports Server (NTRS)

Maffeo, R.

1985-01-01

Transfer Analysis Code to Interface Thermal/Structural Problems (TRANCITS) is discussed. The TRANCITS code satisfies all the objectives for transferring thermal data between heat transfer and structural models of combustor liners and it can be used as a generic thermal translator between heat transfer and stress models of any component, regardless of the geometry. The TRANCITS can accurately and efficiently convert the temperature distributions predicted by the heat transfer programs to those required by the stress codes. It can be used for both linear and nonlinear structural codes and can produce nodal temperatures, elemental centroid temperatures, or elemental Gauss point temperatures. The thermal output of both the MARC and SINDA heat transfer codes can be interfaced directly with TRANCITS, and it will automatically produce stress model codes formatted for NASTRAN and MARC. Any thermal program and structural program can be interfaced by using the neutral input and output forms supported by TRANCITS.

The International Space Station Assembly on Schedule

NASA Technical Reports Server (NTRS)

1997-01-01

As engineers continue to prepare the International Space Station (ISS) for in-orbit assembly in the year 2002, ANSYS software has proven instrumental in resolving a structural problem in the project's two primary station modules -- Nodes 1 and 2. Proof pressure tests performed in May revealed "low temperature, post-yield creep" in some of the Nodes' gussets, which were designed to reinforce ports for loads from station keeping and reboost motion of the entire space station. An extensive effort was undertaken to characterize the creep behavior of the 2219-T851 aluminum forging material from which the gussets were made. Engineers at Sverdrup Technology, Inc. (Huntsville, AL) were responsible for conducting a combined elastic-plastic-creep analysis of the gussets to determine the amount of residual compressive stress which existed in the gussets following the proof pressure tests, and to determine the stress-strain history in the gussets while on-orbit. Boeing, NASA's Space Station prime contractor, supplied the Finite Element Analysis (FEA) model geometry and developed the creep equations from the experimental data taken by NASA's Marshall Space Flight Center and Langley Research Center. The goal of this effort was to implement the uniaxial creep equations into a three dimensional finite element program, and to determine analytically whether or not the creep was something that the space station program could live with. The objective was to show analytically that either the creep rate was at an acceptable level, or that the node module had to be modified to lower the stress levels to where creep did not occur. The elastic-plastic-creep analysis was performed using the ANSYS finite element program of ANSYS, Inc. (Houston, PA). The analysis revealed that the gussets encountered a compressive stress of approximately 30,000 pounds per square inch (psi) when unloaded. This compressive residual stress significantly lowered the maximum tension stress in the gussets which decreased the creep strain rate. The analysis also showed that the gussets would not experience a great deal of creep from future pressure tests if braces or struts proposed by Boeing were installed to redistribute stress away from them. Subsequent analysis of on-orbit station keeping and reboost loads convinced Boeing that the gussets should be removed altogether.

The Role of Leadership Support for Health Promotion in Employee Wellness Program Participation, Perceived Job Stress, and Health Behaviors.

PubMed

Hoert, Jennifer; Herd, Ann M; Hambrick, Marion

2018-05-01

The purpose of the study was to explore the relationship between leadership support for health promotion and job stress, wellness program participation, and health behaviors. A cross-sectional survey design was used. Four worksites with a range of wellness programs were selected for this study. Participants in this study were employees (n = 618) at 4 organizations (bank, private university, wholesale supplier, and public university) in the southeastern United States, each offering an employee wellness program. Response rates in each organization ranged from 3% to 34%. Leadership support for health promotion was measured with the Leading by Example instrument. Employee participation in wellness activities, job stress, and health behaviors were measured with multi-item scales. Correlation/regression analysis and descriptive statistics were used to analyze the relationships among the scaled variables. Employees reporting higher levels of leadership support for health promotion also reported higher levels of wellness activity participation, lower job stress, and greater levels of health behavior ( P = .001). To ascertain the amount of variance in health behaviors accounted for by the other variables in the study, a hierarchical regression analysis revealed a statistically significant model (model F 7,523 = 27.28; P = .001), with leadership support for health promotion (β = .19, t = 4.39, P = .001), wellness activity participation (β = .28, t = 6.95, P < .001), and job stress (β = -.27, t = -6.75, P ≤ .001) found to be significant predictors of health behaviors in the model. Exploratory regression analyses by organization revealed the focal variables as significant model predictors for only the 2 larger organizations with well-established wellness programs. Results from the study suggest that employees' perceptions of organizational leadership support for health promotion are related to their participation in wellness activities, perceived job stress levels, and health behaviors.

A new mother-child play activity program to decrease parenting stress and improve child cognitive abilities: a cluster randomized controlled trial.

PubMed

Tachibana, Yoshiyuki; Fukushima, Ai; Saito, Hitomi; Yoneyama, Satoshi; Ushida, Kazuo; Yoneyama, Susumu; Kawashima, Ryuta

2012-01-01

We propose a new play activity intervention program for mothers and children. Our interdisciplinary program integrates four fields of child-related sciences: neuroscience, preschool pedagogy, developmental psychology, and child and maternal psychiatry. To determine the effect of this intervention on child and mother psychosocial problems related to parenting stress and on the children's cognitive abilities, we performed a cluster randomized controlled trial. Participants were 238 pairs of mothers and typically developing preschool children (ages 4-6 years old) from Wakakusa kindergarten in Japan. The pairs were asked to play at home for about 10 min a day, 5 days a week for 3 months. Participants were randomly assigned to the intervention or control group by class unit. The Parenting Stress Index (PSI) (for mothers), the Goodenough Draw-a-Man intelligence test (DAM), and the new S-S intelligence test (NS-SIT) (for children) were administered prior to and 3 months after the intervention period. Pre-post changes in test scores were compared between the groups using a linear mixed-effects model analysis. The primary outcomes were the Total score on the child domain of the PSI (for child psychosocial problems related to parenting stress), Total score on the parent domain of the PSI (for maternal psychosocial problems related to parenting stress), and the score on the DAM (for child cognitive abilities). The results of the PSI suggested that the program may reduce parenting stress. The results of the cognitive tests suggested that the program may improve the children's fluid intelligence, working memory, and processing speed. Our intervention program may ameliorate the children's psychosocial problems related to parenting stress and increase their cognitive abilities. UMIN Clinical Trials Registry UMIN000002265.

A New Mother-Child Play Activity Program to Decrease Parenting Stress and Improve Child Cognitive Abilities: A Cluster Randomized Controlled Trial

PubMed Central

Tachibana, Yoshiyuki; Fukushima, Ai; Saito, Hitomi; Yoneyama, Satoshi; Ushida, Kazuo; Yoneyama, Susumu; Kawashima, Ryuta

2012-01-01

Background We propose a new play activity intervention program for mothers and children. Our interdisciplinary program integrates four fields of child-related sciences: neuroscience, preschool pedagogy, developmental psychology, and child and maternal psychiatry. To determine the effect of this intervention on child and mother psychosocial problems related to parenting stress and on the children's cognitive abilities, we performed a cluster randomized controlled trial. Methodology/Principal Findings Participants were 238 pairs of mothers and typically developing preschool children (ages 4–6 years old) from Wakakusa kindergarten in Japan. The pairs were asked to play at home for about 10 min a day, 5 days a week for 3 months. Participants were randomly assigned to the intervention or control group by class unit. The Parenting Stress Index (PSI) (for mothers), the Goodenough Draw-a-Man intelligence test (DAM), and the new S-S intelligence test (NS-SIT) (for children) were administered prior to and 3 months after the intervention period. Pre–post changes in test scores were compared between the groups using a linear mixed-effects model analysis. The primary outcomes were the Total score on the child domain of the PSI (for child psychosocial problems related to parenting stress), Total score on the parent domain of the PSI (for maternal psychosocial problems related to parenting stress), and the score on the DAM (for child cognitive abilities). The results of the PSI suggested that the program may reduce parenting stress. The results of the cognitive tests suggested that the program may improve the children's fluid intelligence, working memory, and processing speed. Conclusions/Significance Our intervention program may ameliorate the children's psychosocial problems related to parenting stress and increase their cognitive abilities. Trial Registration UMIN Clinical Trials Registry UMIN000002265 PMID:22848340

HOLEGAGE 1.0 - STRAIN GAGE HOLE DRILLING ANALYSIS PROGRAM

NASA Technical Reports Server (NTRS)

Hampton, R. W.

1994-01-01

There is no simple and perfect way to measure residual stresses in metal parts that have been welded or deformed to make complex structures such as pressure vessels and aircraft, yet these locked-in stresses can contribute to structural failure by fatigue and fracture. However, one proven and tested technique for determining the internal stress of a metal part is to drill a test hole while measuring the relieved strains around the hole, such as the hole-drilling strain gage method described in ASTM E 837. The program HOLEGAGE processes strain gage data and provides additional calculations of internal stress variations that are not obtained with standard E 837 analysis methods. The typical application of the technique uses a three gage rosette with a special hole-drilling fixture for drilling a hole through the center of the rosette to produce a hole with very small gage pattern eccentricity error. Another device is used to control the drilling and halt the drill at controlled depth steps. At each step, strains from all three strain gages are recorded. The influence coefficients used by HOLEGAGE to compute stresses from relieved hole strains were developed by published finite element method studies of thick plates for specific hole sizes and depths. The program uses a parabolic fit and an interpolating scheme to project the coefficients to other hole sizes and depths. Additionally, published experimental data are used to extend the coefficients to relatively thin plates. These influence coefficients are used to compute the stresses in the original part from the strain data. HOLEGAGE will compute interior planar stresses using strain data from each drilled hole depth layer. Planar stresses may be computed in three ways including: a least squares fit for a linear variation with depth, an integral method to give incremental stress data for each layer, or by a linear fit to the integral data (with some surface data points omitted) to predict surface stresses before strain gage sanding preparations introduced additional residual stresses. Options are included for estimating the effect of hole eccentricity on calculations, smoothing noise from the strain data, and inputting the program data either interactively or from a data file. HOLEGAGE was written in FORTRAN 77 for DEC VAX computers under VMS, and is transportable except for system-unique TIME and DATE system calls. The program requires 54K of main memory and was developed in 1990. The program is available on a 9-track 1600 BPI VAX BACKUP format magnetic tape (standard media) or a TK50 tape cartridge. The documentation is included on the tape. DEC VAX and VMS are trademarks of Digital Equipment Corporation.

Nonapplicability of linear finite element programs to the stress analysis of tires

NASA Technical Reports Server (NTRS)

Durand, M.; Jankovich, E.

1972-01-01

A static finite element stress analysis of an inflated radial car tire was carried out. The deformed shape of the sidewall presents outward bulging. The analysis of a homogeneous isotropic toroidal shell shows that the problem is common to all solids of this type. The study suggests that the geometric stiffness due to the inflation pressure has to be taken into account. Also, the resulting large displacements make it necessary for the geometry to be updated at each load step.

Relating Therapist Characteristics to Client Engagement and the Therapeutic Alliance in an Adolescent Custodial Group Substance Misuse Treatment Program.

PubMed

Daniels, Rachael Anne; Holdsworth, Emma; Tramontano, Carlo

2017-07-29

Client engagement in substance misuse treatment programs is directly associated with positive treatment outcomes. The nature of these programs means there are often difficulties engaging and retaining clients, but authors have consistently found a strong therapeutic alliance is associated with client engagement. While research has focused on the association between the alliance and engagement, the factors that influence the therapeutic alliance have received less attention. To examine therapists' characteristics, namely therapists' stress and empathy levels, as potential predictors of client engagement and the therapeutic alliance, within an adolescent substance misuse group treatment program. The sample included 84 adolescent clients and 14 therapists from a Secure Training Centre in England. Client engagement in the treatment program was observed, while self-reporting measures assessed the therapeutic alliance (client and therapist-rated), and therapists' stress and empathy levels. Multiple regression analysis revealed that therapists' stress levels negatively influenced the therapeutic alliance and had a curvilinear relationship with client engagement, indicating that stress is not exclusively negatively related to engagement. Although stress was found to negatively impact both cognitive and affective empathy, neither cognitive nor affective empathy were significantly related to client engagement or the therapeutic alliance. This study demonstrates the importance of therapist characteristics on client engagement and the therapeutic alliance. Within practice stress can have a positive impact on clients' engagement. Nevertheless, therapists may need additional support to deal with stress effectively. Therapists' empathy may too be fundamental to client engagement, but only it if is perceived by clients.

Application of NASTRAN for stress analysis of left ventricle of the heart

NASA Technical Reports Server (NTRS)

Pao, Y. C.; Ritman, E. L.; Wang, H. C.

1975-01-01

Knowing the stress and strain distributions in the left ventricular wall of the heart is a prerequisite for the determination of the muscle elasticity and contractility in the process of assessing the functional status of the heart. NASTRAN was applied for the calculation of these stresses and strains and to help in verifying the results obtained by the computer program FEAMPS which was specifically designed for the plane-strain finite-element analysis of the left ventricular cross sections. Adopted for the analysis are the true shape and dimensions of the cross sections reconstructed from multiplanar X-ray views of a left ventricle which was surgically isolated from a dog's heart but metabolically supported to sustain its beating. A preprocessor was prepared to accommodate both FEAMPS and NASTRAN, and it has also facilitated the application of both the triangular element and isoparameteric quadrilateral element versions of NASTRAN. The stresses in several crucial regions of the left ventricular wall calculated by these two independently developed computer programs are found to be in good agreement. Such confirmation of the results is essential in the development of a method which assesses the heart performance.

A Nationally Scaled Telebehavioral Health Program for Chronic Pain: Characteristics, Goals, and Psychological Outcomes.

PubMed

Mochari-Greenberger, Heidi; Peters, Aimee; Vue, Lee; Pande, Reena L

2017-08-01

Millions of U.S. adults suffer from chronic pain with a high prevalence of comorbid mental health issues. Telehealth-delivered behavioral therapy for chronic pain has been evaluated in the research setting. The purpose of this study was 1) to describe a nationally scaled, standardized, telebehavioral therapy program for patients with chronic pain and behavioral comorbidities, and 2) evaluate characteristics, goals, and psychosocial outcomes among program participants. This was mixed-methods retrospective cohort analysis among consecutive program graduates (mean age 53y; 24% male). The 8-week program was delivered by a licensed therapist and a behavior coach through telephone/secure video and tailored to each participant's behavioral health needs and goals. Participant chief complaints, behavioral goals, and mood triggers were abstracted by deidentified clinical record review using structured qualitative research methods. Depression, anxiety, and stress symptom data were collected at baseline and program graduation using the validated Depression Anxiety Stress Scales 21. Back pain (42%) and hip/leg/knee pain (28%) comprised the most common chief complaints. Pain management (44%) and weight loss (43%) were the most frequently cited goals. At baseline, approximately half of participants had elevated depression (59%), anxiety (54%), and/or stress (48%) scores. Triggers for depressed, anxious, or stressed mood included severe pain (47%), health concerns (46%), and interpersonal relationship challenges (45%). At graduation, significant improvement in median depression (-54%), anxiety (-50%), and stress (-33%) symptom scores was observed among those with non-normal baseline values (p < 0.001); degree of improvement did not vary by participant age or sex. Participants in a nationally scaled telebehavioral health program for chronic pain experienced significant improvement in depression, anxiety, and stress symptoms and shared several complaints, goals, and mood triggers.

Thermal-Mechanical Stress Analysis of PWR Pressure Vessel and Nozzles under Grid Load-Following Mode: Interim Report on the Effect of Cyclic Hardening Material Properties and Pre-existing Cracks on Stress Analysis Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohanty, Subhasish; Soppet, William; Majumdar, Saurin

This report provides an update on an assessment of environmentally assisted fatigue for light water reactor components under extended service conditions. This report is a deliverable under the work package for environmentally assisted fatigue as part of DOE’s Light Water Reactor Sustainability Program. In a previous report (September 2015), we presented tensile and fatigue test data and related hardening material properties for 508 low-alloys steel base metal and other reactor metals. In this report, we present thermal-mechanical stress analysis of the reactor pressure vessel and its hot-leg and cold-leg nozzles based on estimated material properties. We also present results frommore » thermal and thermal-mechanical stress analysis under reactor heat-up, cool-down, and grid load-following conditions. Analysis results are given with and without the presence of preexisting cracks in the reactor nozzles (axial or circumferential crack). In addition, results from validation stress analysis based on tensile and fatigue experiments are reported.« less

Wellness Intervention Effects on Lifestyle, Attitudes and Stress.

ERIC Educational Resources Information Center

Horowitz, Stephen M.; And Others

The effect of an on-site health promotion program on lifestyle behavior, health, attitude, and stress was studied with 41 university faculty and nonacademic administrators. The participants were administered a maximal graded exercise tolerance test, hydrostatic weighing, and the Lifestyle Analysis Questionnaire. While 32 staff were assigned to an…

The Classroom: Insights into Educational Evaluation in School Programs for Emotionally Disturbed Children and Youth.

ERIC Educational Resources Information Center

Friedman, Helen, Ed.

Presented are conference proceedings on evaluation of educational programs for emotionally disturbed children. Raphael F. Simches highlights past and future educational trends in programs for handicapped children. Fritz Redl stresses various motivations that may cause violent behavior. A systematic approach to classroom analysis via taxonomy of…

Aeroelastic Considerations in the Preliminary Design Aircraft

DTIC Science & Technology

1983-09-01

system for aeroelastic analysis FINDEX- Lockheed’s DMS for matrices and NASTRAN tables FSD- fully stressed design algorithm Lockheed- Lockheed-California...Company MLC- maneuver load control NASA- National Aeronautics and Space Adminstration NASTRAN - structural finite element program developed by NASA...Computer Program Validation All major computing programs (FAMAS, NASTRAN , etc.), except the weight distribution program, the panel sizing and allowable

Parents Plus Systemic, Solution-Focused Parent Training Programs: Description, Review of the Evidence Base, and Meta-Analysis.

PubMed

Carr, Alan; Hartnett, Dan; Brosnan, Eileen; Sharry, John

2017-09-01

Parents Plus (PP) programs are systemic, solution-focused, group-based interventions. They are designed for delivery in clinical and community settings as treatment programs for families with child-focused problems, such as behavioral difficulties, disruptive behavior disorders, and emotional disorders in young people with and without developmental disabilities. PP programs have been developed for families of preschoolers, preadolescent children, and teenagers, as well as for separated or divorced families. Seventeen evaluation studies involving over 1,000 families have shown that PP programs have a significant impact on child behavior problems, goal attainment, and parental satisfaction and stress. The effect size of 0.57 (p < .001) from a meta-analysis of 10 controlled studies for child behavior problems compares favorably with those of meta-analyses of other well-established parent training programs with large evidence bases. In controlled studies, PP programs yielded significant (p < .001) effect sizes for goal attainment (d = 1.51), parental satisfaction (d = 0.78), and parental stress reduction (d = 0.54). PP programs may be facilitated by trained front-line mental health and educational professionals. © 2016 Family Process Institute.

PROGRAM ASTEC (ADVANCED SOLAR TURBO ELECTRIC CONCEPT). PART IV. SOLAR COLLECTOR DEVELOPMENT SUPPORT TASKS. VOL. VI. DEVELOPMENT OF ANALYTICAL TECHNIQUES TO PREDICT THE STRUCTURAL BEHAVIOR OF PETAL-TYPE SOLAR COLLECTORS.

DTIC Science & Technology

The design of large petal-type paraboloidal solar collectors for the ASTEC Program requires a capability for determining the distortion and stress...analysis of a parabolic curved beam is given along with a numerical solution and digital program. The dynamic response of the ASTEC flight-test vehicle is discussed on the basis of modal analysis.

Elastic-plastic analysis of a propagating crack under cyclic loading

NASA Technical Reports Server (NTRS)

Newman, J. C., Jr.; Armen, H., Jr.

1974-01-01

Development and application of a two-dimensional finite-element analysis to predict crack-closure and crack-opening stresses during specified histories of cyclic loading. An existing finite-element computer program which accounts for elastic-plastic material behavior under cyclic loading was modified to account for changing boundary conditions - crack growth and intermittent contact of crack surfaces. This program was subsequently used to study the crack-closure behavior under constant-amplitude and simple block-program loading.

Advanced Software for Analysis of High-Speed Rolling-Element Bearings

NASA Technical Reports Server (NTRS)

Poplawski, J. V.; Rumbarger, J. H.; Peters, S. M.; Galatis, H.; Flower, R.

2003-01-01

COBRA-AHS is a package of advanced software for analysis of rigid or flexible shaft systems supported by rolling-element bearings operating at high speeds under complex mechanical and thermal loads. These loads can include centrifugal and thermal loads generated by motions of bearing components. COBRA-AHS offers several improvements over prior commercial bearing-analysis programs: It includes innovative probabilistic fatigue-life-estimating software that provides for computation of three-dimensional stress fields and incorporates stress-based (in contradistinction to prior load-based) mathematical models of fatigue life. It interacts automatically with the ANSYS finite-element code to generate finite-element models for estimating distributions of temperature and temperature-induced changes in dimensions in iterative thermal/dimensional analyses: thus, for example, it can be used to predict changes in clearances and thermal lockup. COBRA-AHS provides an improved graphical user interface that facilitates the iterative cycle of analysis and design by providing analysis results quickly in graphical form, enabling the user to control interactive runs without leaving the program environment, and facilitating transfer of plots and printed results for inclusion in design reports. Additional features include roller-edge stress prediction and influence of shaft and housing distortion on bearing performance.

Stress analysis and design considerations for Shuttle pointed autonomous research tool for astronomy /SPARTAN/

NASA Technical Reports Server (NTRS)

Ferragut, N. J.

1982-01-01

The Shuttle Pointed Autonomous Research Tool for Astronomy (SPARTAN) family of spacecraft are intended to operate with minimum interfaces with the U.S. Space Shuttle in order to increase flight opportunities. The SPARTAN I Spacecraft was designed to enhance structural capabilities and increase reliability. The approach followed results from work experience which evolved from sounding rocket projects. Structural models were developed to do the analyses necessary to satisfy safety requirements for Shuttle hardware. A loads analysis must also be performed. Stress analysis calculations will be performed on the main structural elements and subcomponents. Attention is given to design considerations and program definition, the schematic representation of a finite element model used for SPARTAN I spacecraft, details of loads analysis, the stress analysis, and fracture mechanics plan implications.

Current development in selected stress and thermal analysis software interfaces with PRO-ENGINEER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schulze, J.

1993-06-01

Ever since PRO-ENGINEER has become a dominating CAD package available to the public, some of us have been saying, ``Gee, if only I could export my geometry to a stress analysis program without having to recreate any of the details already created, wouldn`t that be spectacular?`` Well, much to the credit of the major stress and thermal analysis software vendors, some of them have been listening to design engineers like me badger them to furnish a seamless interface between PRO and their stress analysis programs. The down side of this problem is the fact that a lot of problems stillmore » exist with most of the vendors and their interfaces. I want to discuss the interfaces that I feel are currently ``State of the Art``, and how they are developing and the future for finally arriving at a transparent procedure that an engineer at a workstation can utilize in his or her design process. In years past, engineers would develop a design and changes would evolve based on intuition, or somebody else`s critical evaluation. Then the design would be forwarded to the production group, or the stress analysis group for further evaluation and analysis. Maybe data from a preliminary prototype would be collected and an evaluation report made. All of this took time and increased the cost of the item to be manufactured. Today, the engineer must assume responsibility for design and functional capability early on in the design process, if for no other reason than costs associated with diverse channels of critiquing. For that reason, one place to enhance the design process is to have the ability to do preliminary stress and thermal analysis during the initial design phase. This is both cost and time effective. But, as I am sure you are aware, this has been easier said than done.« less

A systematic review of psychosocial interventions for women with postpartum stress.

PubMed

Song, Ju-Eun; Kim, Tiffany; Ahn, Jeong-Ah

2015-01-01

To analyze the effects of psychosocial interventions with the aim of reducing the intensity of stress in mothers during the postpartum period as compared with usual care. Eligible studies were identified by searching MEDLINE, EMBASE, CINAHL, and ProQuest dissertations and theses. Randomized controlled trials (RCTs) treating stress in postpartum mothers older than age 19 years were included. The suitability of the quality of articles was evaluated using Joanna Briggs Institute's Critical Appraisal Checklist for Experimental Studies. Fourteen articles met the inclusion criteria for data analysis. Authors, country, sample, setting, methods, time period, major content of the intervention, outcome measures, and salient findings were extracted and summarized in a data extraction form for further analysis and synthesis. Standardized mean differences with 95% confidence intervals were calculated for 13 suitable articles using Cochrane Review Manager. Of 1,871 publications, 14 RCTs, conducted between 1994 and 2012, were evaluated in the systematic review and 13 studies were included in the meta-analysis. Studies were categorized into three major types by interventional methods. We found that psychosocial interventions in general (standard mean difference -1.66, 95% confidence interval [-2.74, -0.57], p = .003), and supportive stress management programs in particular (standard mean difference -0.59, 95% confidence interval [-0.94, -0.23], p = .001), were effective for women dealing with postpartum stress. This review indicated that psychosocial interventions including supportive stress management programs are effective for reducing postpartum stress in women, so those interventions should become an essential part of maternity care. © 2015 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses.

Effectiveness of progressive muscle relaxation therapy as a worksite health promotion program in the automobile assembly line

PubMed Central

SUNDRAM, Bala Murali; DAHLUI, Maznah; CHINNA, Karuthan

2015-01-01

The aim of this study was to examine the effectiveness of Progressive Muscle Relaxation (PMR) as part of a Worksite Health Promotion Program on self-perceived stress, anxiety and depression among male automotive assembly-line workers through a quasi-experimental trial. Two assembly plants were chosen with one receiving PMR therapy and the other Pamphlets. Intention-to-treat analysis was conducted to test the effectiveness of the relaxation therapy. Stress, Depression and Anxiety levels were measured using the shortened DASS-21 questionnaire. Data were analyzed using Chi-square, Independent sample t test and Repeated-measures analysis of variance to test the significance of the effects of intervention (time * group) for the measures of Stress, Depression and Anxiety. Significant favourable intervention effects on stress were found in the PMR group (Effect size=0.6) as compared to the Pamphlet group (Effect size=0.2). There was a significant group *time interaction effect (p<0.001) on Stress levels. Depression and Anxiety levels were minimal at baseline in both the groups with mild or no reduction in levels. The improvement in stress levels showed the potential of PMR therapy as a coping strategy at the workplace. Further research in this field is necessary to examine the beneficial effects of coping strategies in the workplace. PMID:26726829

Effectiveness of progressive muscle relaxation therapy as a worksite health promotion program in the automobile assembly line.

PubMed

Sundram, Bala Murali; Dahlui, Maznah; Chinna, Karuthan

2016-06-10

The aim of this study was to examine the effectiveness of Progressive Muscle Relaxation (PMR) as part of a Worksite Health Promotion Program on self-perceived stress, anxiety and depression among male automotive assembly-line workers through a quasi-experimental trial. Two assembly plants were chosen with one receiving PMR therapy and the other Pamphlets. Intention-to-treat analysis was conducted to test the effectiveness of the relaxation therapy. Stress, Depression and Anxiety levels were measured using the shortened DASS-21 questionnaire. Data were analyzed using Chi-square, Independent sample t test and Repeated-measures analysis of variance to test the significance of the effects of intervention (time * group) for the measures of Stress, Depression and Anxiety. Significant favourable intervention effects on stress were found in the PMR group (Effect size=0.6) as compared to the Pamphlet group (Effect size=0.2). There was a significant group *time interaction effect (p<0.001) on Stress levels. Depression and Anxiety levels were minimal at baseline in both the groups with mild or no reduction in levels. The improvement in stress levels showed the potential of PMR therapy as a coping strategy at the workplace. Further research in this field is necessary to examine the beneficial effects of coping strategies in the workplace.

Plastic and Large-Deflection Analysis of Nonlinear Structures

NASA Technical Reports Server (NTRS)

Thomson, R. G.; Hayduk, R. J.; Robinson, M. P.; Durling, B. J.; Pifko, A.; Levine, H. S.; Armen, H. J.; Levy, A.; Ogilvie, P.

1982-01-01

Plastic and Large Deflection Analysis of Nonlinear Structures (PLANS) system is collection of five computer programs for finite-element static-plastic and large deflection analysis of variety of nonlinear structures. System considers bending and membrane stresses, general three-dimensional bodies, and laminated composites.

Mechanical Pre-Stressing a Transducer through a Negative DC Biasing Field

DTIC Science & Technology

2017-04-21

13  ii LIST OF ABBREVIATIONS AND ACRONYMS AC Alternating Current DC Direct Currant FEA Finite Element Analysis NUWC Naval...at resonance into tension is shown in figure 3; it was estimated from finite element analysis (FEA) that the tensional stresses exceeded 2000 psi...PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Stephen C. Butler 5.d PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION

Analysis of thermal stress of the piston during non-stationary heat flow in a turbocharged Diesel engine

NASA Astrophysics Data System (ADS)

Gustof, P.; Hornik, A.

2016-09-01

In the paper, numeric calculations of thermal stresses of the piston in a turbocharged Diesel engine in the initial phase of its work were carried out based on experimental studies and the data resulting from them. The calculations were made using a geometrical model of the piston in a five-cylinder turbocharged Diesel engine with a capacity of about 2300 cm3, with a direct fuel injection to the combustion chamber and a power rating of 85 kW. In order to determine the thermal stress, application of own mathematical models of the heat flow in characteristic surfaces of the piston was required to show real processes occurring on the surface of the analysed component. The calculations were performed using a Geostar COSMOS/M program module. A three-dimensional geometric model of the piston was created in this program based on a real component, in order to enable the calculations and analysis of thermal stresses during non-stationary heat flow. Modelling of the thermal stresses of the piston for the engine speed n=4250 min-1 and engine load λ=1.69 was carried out.

Thermal-stress analysis for a wood composite blade

NASA Technical Reports Server (NTRS)

Fu, K. C.; Harb, A.

1984-01-01

A thermal-stress analysis of a wind turbine blade made of wood composite material is reported. First, the governing partial differential equation on heat conduction is derived, then, a finite element procedure using variational approach is developed for the solution of the governing equation. Thus, the temperature distribution throughout the blade is determined. Next, based on the temperature distribution, a finite element procedure using potential energy approach is applied to determine the thermal-stress distribution. A set of results is obtained through the use of a computer, which is considered to be satisfactory. All computer programs are contained in the report.

JPL-IDEAS - ITERATIVE DESIGN OF ANTENNA STRUCTURES

NASA Technical Reports Server (NTRS)

Levy, R.

1994-01-01

The Iterative DEsign of Antenna Structures (IDEAS) program is a finite element analysis and design optimization program with special features for the analysis and design of microwave antennas and associated sub-structures. As the principal structure analysis and design tool for the Jet Propulsion Laboratory's Ground Antenna and Facilities Engineering section of NASA's Deep Space Network, IDEAS combines flexibility with easy use. The relatively small bending stiffness of the components of large, steerable reflector antennas allows IDEAS to use pinjointed (three translational degrees of freedom per joint) models for modeling the gross behavior of these antennas when subjected to static and dynamic loading. This facilitates the formulation of the redesign algorithm which has only one design variable per structural element. Input data deck preparation has been simplified by the use of NAMELIST inputs to promote clarity of data input for problem defining parameters, user selection of execution and design options and output requests, and by the use of many attractive and familiar features of the NASTRAN program (in many cases, NASTRAN and IDEAS formatted bulk data cards are interchangeable). Features such as simulation of a full symmetric structure based on analyses of only half the structure make IDEAS a handy and efficient analysis tool, with many features unavailable in any other finite element analysis program. IDEAS can choose design variables such as areas of rods and thicknesses of plates to minimize total structure weight, constrain the structure weight to a specified value while maximizing a natural frequency or minimizing compliance measures, and can use a stress ratio algorithm to size each structural member so that it is at maximum or minimum stress level for at least one of the applied loads. Calculations of total structure weight can be broken down according to material. Center of gravity weight balance, static first and second moments about the center of mass and optionally about a user-specified gridpoint, and lumped structure weight at grid points can also be calculated. Other analysis outputs include calculation of reactions, displacements, and element stresses due to specified gravity, thermal, and external applied loads; calculations of linear combinations of specific node displacements (e.g. to represent motions of rigid attachments not included in the structure model), natural frequency eigenvalues and eigenvectors, structure reactions and element stresses, and coordinates of effective modal masses. Cassegrain antenna boresight error analysis of a best fitting paraboloid and Cassegrain microwave antenna root mean square half-pathlength error analysis of a best fitting paraboloid are also performed. The IDEAS program is written in ATHENA FORTRAN and ASSEMBLER for an EXEC 8 operating system and was implemented on a UNIVAC 1100 series computer. The minimum memory requirement for the program is approximately 42,000 36-bit words. This program is available on a 9-track 1600 BPI magnetic tape in UNIVAC FURPUR format only; since JPL-IDEAS will not run on other platforms, COSMIC will not reformat the code to be readable on other platforms. The program was developed in 1988.

BEST3D user's manual: Boundary Element Solution Technology, 3-Dimensional Version 3.0

NASA Technical Reports Server (NTRS)

1991-01-01

The theoretical basis and programming strategy utilized in the construction of the computer program BEST3D (boundary element solution technology - three dimensional) and detailed input instructions are provided for the use of the program. An extensive set of test cases and sample problems is included in the manual and is also available for distribution with the program. The BEST3D program was developed under the 3-D Inelastic Analysis Methods for Hot Section Components contract (NAS3-23697). The overall objective of this program was the development of new computer programs allowing more accurate and efficient three-dimensional thermal and stress analysis of hot section components, i.e., combustor liners, turbine blades, and turbine vanes. The BEST3D program allows both linear and nonlinear analysis of static and quasi-static elastic problems and transient dynamic analysis for elastic problems. Calculation of elastic natural frequencies and mode shapes is also provided.

Combining Thermal And Structural Analyses

NASA Technical Reports Server (NTRS)

Winegar, Steven R.

1990-01-01

Computer code makes programs compatible so stresses and deformations calculated. Paper describes computer code combining thermal analysis with structural analysis. Called SNIP (for SINDA-NASTRAN Interfacing Program), code provides interface between finite-difference thermal model of system and finite-element structural model when no node-to-element correlation between models. Eliminates much manual work in converting temperature results of SINDA (Systems Improved Numerical Differencing Analyzer) program into thermal loads for NASTRAN (NASA Structural Analysis) program. Used to analyze concentrating reflectors for solar generation of electric power. Large thermal and structural models needed to predict distortion of surface shapes, and SNIP saves considerable time and effort in combining models.

CellStress - open source image analysis program for single-cell analysis

NASA Astrophysics Data System (ADS)

Smedh, Maria; Beck, Caroline; Sott, Kristin; Goksör, Mattias

2010-08-01

This work describes our image-analysis software, CellStress, which has been developed in Matlab and is issued under a GPL license. CellStress was developed in order to analyze migration of fluorescent proteins inside single cells during changing environmental conditions. CellStress can also be used to score information regarding protein aggregation in single cells over time, which is especially useful when monitoring cell signaling pathways involved in e.g. Alzheimer's or Huntington's disease. Parallel single-cell analysis of large numbers of cells is an important part of the research conducted in systems biology and quantitative biology in order to mathematically describe cellular processes. To quantify properties for single cells, large amounts of data acquired during extended time periods are needed. Manual analyses of such data involve huge efforts and could also include a bias, which complicates the use and comparison of data for further simulations or modeling. Therefore, it is necessary to have an automated and unbiased image analysis procedure, which is the aim of CellStress. CellStress utilizes cell contours detected by CellStat (developed at Fraunhofer-Chalmers Centre), which identifies cell boundaries using bright field images, and thus reduces the fluorescent labeling needed.

Arthropod surveillance programs: Basic components, strategies, and analysis

USDA-ARS?s Scientific Manuscript database

Effective entomological surveillance planning stresses a careful consideration of methodology, trapping technologies, and analysis techniques. Herein, the basic principles and technological components of arthropod surveillance plans are described, as promoted in the symposium “Advancements in arthro...

Early Intervention in Reading[R]. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2008

2008-01-01

"Early Intervention in Reading"[R] is a program designed to provide extra instruction to groups of students at risk of failing to learn to read. The program uses picture books to stress instruction in phonemic awareness, phonics, and contextual analysis, along with repeated reading and writing. In grades K, 1, and 2, the program is based on…

Structural Analysis Computer Programs for Rigid Multicomponent Pavement Structures with Discontinuities--WESLIQID and WESLAYER. Report 1. Program Development and Numerical Presentations.

DTIC Science & Technology

1981-05-01

represented as a Winkler foundation. The program can treat any number of slabs connected by steel bars or other load trans- fer devices at the joints...dimensional finite element method. The inherent flexibility of such an approach permits the analysis of a rigid pavement with steel bars and stabilized...layers and provides an efficient tool for analyzing stress conditions at the joint. Unfor- tunately, such a procedure would require a tremendously

Stress, Mental Health, and Substance Abuse Problems in a Sample of Diversion Program Youths: An Exploratory Latent Class Analysis

ERIC Educational Resources Information Center

Dembo, Richard; Briones, Rhissa; Gulledge, Laura; Karas, Lora; Winters, Ken C.; Belenko, Steven; Greenbaum, Paul E.

2012-01-01

Reflective of interest in mental health and substance abuse issues among youths involved with the justice system, we performed a latent class analysis on baseline information collected on 100 youths involved in two diversion programs. Results identified two groups of youths: Group 1: a majority of the youths, who had high levels of delinquency,…

Time-dependent deformation of titanium metal matrix composites

NASA Technical Reports Server (NTRS)

Bigelow, C. A.; Bahei-El-din, Y. A.; Mirdamadi, M.

1995-01-01

A three-dimensional finite element program called VISCOPAC was developed and used to conduct a micromechanics analysis of titanium metal matrix composites. The VISCOPAC program uses a modified Eisenberg-Yen thermo-viscoplastic constitutive model to predict matrix behavior under thermomechanical fatigue loading. The analysis incorporated temperature-dependent elastic properties in the fiber and temperature-dependent viscoplastic properties in the matrix. The material model was described and the necessary material constants were determined experimentally. Fiber-matrix interfacial behavior was analyzed using a discrete fiber-matrix model. The thermal residual stresses due to the fabrication cycle were predicted with a failed interface, The failed interface resulted in lower thermal residual stresses in the matrix and fiber. Stresses due to a uniform transverse load were calculated at two temperatures, room temperature and an elevated temperature of 650 C. At both temperatures, a large stress concentration was calculated when the interface had failed. The results indicate the importance of accuracy accounting for fiber-matrix interface failure and the need for a micromechanics-based analytical technique to understand and predict the behavior of titanium metal matrix composites.

Meditation Programs for Psychological Stress and Well-being: A Systematic Review and Meta-analysis

PubMed Central

Goyal, Madhav; Singh, Sonal; Sibinga, Erica M. S.; Gould, Neda F.; Rowland-Seymour, Anastasia; Sharma, Ritu; Berger, Zackary; Sleicher, Dana; Maron, David D.; Shihab, Hasan M.; Ranasinghe, Padmini D; Linn, Shauna; Saha, Shonali; Bass, Eric B.; Haythornthwaite, Jennifer A.

2014-01-01

Importance Many people meditate to reduce psychological stress and stress-related health problems. To counsel people appropriately, clinicians need to know what the evidence says about the health benefits of meditation. Objective To determine the efficacy of meditation programs in improving stress-related outcomes (anxiety, depression, stress/distress, positive mood, mental health quality of life, attention, substance use, eating, sleep, pain, and weight) in diverse adult clinical populations. Evidence Review We included randomized trials with active controls that controlled for placebo effects, identified through November 2012 from MEDLINE®, PsycINFO, EMBASE®, PsycArticles, SCOPUS, CINAHL, AMED, Cochrane Library, and hand searches. Independent reviewers screened citations and extracted data. We graded the strength of evidence using four domains (risk of bias, precision, directness, and consistency) and determined the magnitude and direction of effect by calculating the relative difference between groups in change from baseline. When possible, we conducted meta-analyses using standardized mean differences to obtain aggregate estimates of effect size (ES) with 95 percent confidence intervals (CI). Findings After reviewing 17,801 citations, we included 47 trials with 3,320 participants. Mindfulness meditation programs had moderate evidence to improve anxiety [ ES 0.38 (CI 0.12 to 0.64) at 8 weeks; ES 0.22 (0.02 to 0.43) at 3–6 months], depression [ES 0.30 (0.00 to 0.59) at 8 weeks; ES 0.23 (0.05 to 0.42) at 3–6 months] and pain [ES 0.33 (0.03 to 0.62)], and low evidence to improve stress/distress and mental health-related quality of life. We found either low evidence of no effect or insufficient evidence of any effect of meditation programs on positive mood, attention, substance use, eating, sleep, and weight. We found no evidence that meditation programs were better than any active treatment (drugs, exercise, other behavioral therapies). Conclusions and Relevance Clinicians should be aware that meditation programs can result in small to moderate reductions in multiple negative dimensions of psychological stress. Thus, clinicians should be prepared to talk with their patients about the role that a meditation program could have in addressing psychological stress. Stronger study designs are needed to determine the effects of meditation programs in improving positive dimensions of mental health and stress-related behavior. PMID:24395196

Time-independent Anisotropic Plastic Behavior by Mechanical Subelement Models

NASA Technical Reports Server (NTRS)

Pian, T. H. H.

1983-01-01

The paper describes a procedure for modelling the anisotropic elastic-plastic behavior of metals in plane stress state by the mechanical sub-layer model. In this model the stress-strain curves along the longitudinal and transverse directions are represented by short smooth segments which are considered as piecewise linear for simplicity. The model is incorporated in a finite element analysis program which is based on the assumed stress hybrid element and the iscoplasticity-theory.

Computer program for analysis of high speed, single row, angular contact, spherical roller bearing, SASHBEAN. Volume 2: Mathematical formulation and analysis

NASA Technical Reports Server (NTRS)

Aggarwal, Arun K.

1993-01-01

Spherical roller bearings have typically been used in applications with speeds limited to about 5000 rpm and loads limited for operation at less than about 0.25 million DN. However, spherical roller bearings are now being designed for high load and high speed applications including aerospace applications. A computer program, SASHBEAN, was developed to provide an analytical tool to design, analyze, and predict the performance of high speed, single row, angular contact (including zero contact angle), spherical roller bearings. The material presented is the mathematical formulation and analytical methods used to develop computer program SASHBEAN. For a given set of operating conditions, the program calculates the bearings ring deflections (axial and radial), roller deflections, contact areas stresses, depth and magnitude of maximum shear stresses, axial thrust, rolling element and cage rotational speeds, lubrication parameters, fatigue lives, and rates of heat generation. Centrifugal forces and gyroscopic moments are fully considered. The program is also capable of performing steady-state and time-transient thermal analyses of the bearing system.

A 100-kW metal wind turbine blade basic data, loads and stress analysis

NASA Technical Reports Server (NTRS)

Cherritt, A. W.; Gaidelis, J. A.

1975-01-01

A rotor loads computer program was used to define the steady state and cyclic loads acting on 60 ft long metal blades designed for the ERDA/NASA 100 kW wind turbine. Blade load and stress analysis used to support the structural design are presented. For the loading conditions examined, the metal blades are structurally adequate for use, within the normal operating range, as part of the wind turbine system.

Effects of Biodanza on Stress, Depression, and Sleep Quality in University Students.

PubMed

López-Rodríguez, María Mar; Baldrich-Rodríguez, Ingrid; Ruiz-Muelle, Alicia; Cortés-Rodríguez, Alda Elena; Lopezosa-Estepa, Teresa; Roman, Pablo

2017-07-01

The existing literature shows dance to be an innovative and successful form of stress management. Previous research indicates that Biodanza is able to increase well-being and personal resources and prevent stress. However, Biodanza has not yet been empirically tested as a possible therapy for application outside the clinical context in young adults with perceived stress. This study aimed to determine the effectiveness of Biodanza in reducing symptoms of perceived stress and depression and in promoting sleep quality in young adults, comparing the changes with those observed in a control group. Randomized controlled trial. This study was carried out at the Faculty of Health Sciences of the University of Almería. One hundred and twenty-one university students with perceived stress were randomly placed into either a Biodanza group or a wait-list control group. Study participants attended Biodanza sessions for 90 min a week, over a period of 4 weeks. Depression, perceived stress, and sleep quality were assessed both before and after intervention. Ninety-five participants completed the program and were included in the statistical analysis. Significant differences in perceived stress [t (93) = 2.136; p = 0.015] and depression [t (93) = 2.738; p = 0.000] were observed after the Biodanza period. Pre/post analysis found that Biodanza also had a significant effect on depression (Cohen d = 1.88; p < 0.05) and perceived stress (Cohen d = 0.79; p < 0.05). The Biodanza program is an effective stress management strategy for students. The results of this study showed Biodanza to have a positive effect on perceived stress and depression in young adults. This demonstrates how artistic, collaborative, and psychophysical interventions are an effective means of preventing and managing these problems in university students.

Structural zooming research and development of an interactive computer graphical interface for stress analysis of cracks

NASA Technical Reports Server (NTRS)

Gerstle, Walter

1989-01-01

Engineering problems sometimes involve the numerical solution of boundary value problems over domains containing geometric feature with widely varying scales. Often, a detailed solution is required at one or more of these features. Small details in large structures may have profound effects upon global performance. Conversely, large-scale conditions may effect local performance. Many man-hours and CPU-hours are currently spent in modeling such problems. With the structural zooming technique, it is now possible to design an integrated program which allows the analyst to interactively focus upon a small region of interest, to modify the local geometry, and then to obtain highly accurate responses in that region which reflect both the properties of the overall structure and the local detail. A boundary integral equation analysis program, called BOAST, was recently developed for the stress analysis of cracks. This program can accurately analyze two-dimensional linear elastic fracture mechanics problems with far less computational effort than existing finite element codes. An interactive computer graphical interface to BOAST was written. The graphical interface would have several requirements: it would be menu-driven, with mouse input; all aspects of input would be entered graphically; the results of a BOAST analysis would be displayed pictorially but also the user would be able to probe interactively to get numerical values of displacement and stress at desired locations within the analysis domain; the entire procedure would be integrated into a single, easy to use package; and it would be written using calls to the graphic package called HOOPS. The program is nearing completion. All of the preprocessing features are working satisfactorily and were debugged. The postprocessing features are under development, and rudimentary postprocessing should be available by the end of the summer. The program was developed and run on a VAX workstation, and must be ported to the SUN workstation. This activity is currently underway.

Motivations and Predictors of Cheating in Pharmacy School

PubMed Central

Nguyen, Kathy; Shah, Bijal M.; Doroudgar, Shadi; Bidwal, Monica K.

2016-01-01

Objective. To assess the prevalence, methods, and motivations for didactic cheating among pharmacy students and to determine predictive factors for cheating in pharmacy colleges and schools. Methods. A 45-item cross-sectional survey was conducted at all four doctor of pharmacy programs in Northern California. For data analysis, t test, Fisher exact test, and logistic regression were used. Results. Overall, 11.8% of students admitted to cheating in pharmacy school. Primary motivations for cheating included fear of failure, procrastination, and stress. In multivariate analysis, the only predictor for cheating in pharmacy school was a history of cheating in undergraduate studies. Conclusion. Cheating occurs in pharmacy schools and is motivated by fear of failure, procrastination, and stress. A history of past cheating predicts pharmacy school cheating. The information presented may help programs better understand their student population and lead to a reassessment of ethical culture, testing procedures, and prevention programs. PMID:27899829

Stress generation in thermally grown oxide films. [oxide scale spalling from superalloy substrates

NASA Technical Reports Server (NTRS)

Kumnick, A. J.; Ebert, L. J.

1981-01-01

A three dimensional finite element analysis was conducted, using the ANSYS computer program, of the stress state in a thin oxide film thermally formed on a rectangular piece of NiCrAl alloy. The analytical results indicate a very high compressive stress in the lateral directions of the film (approximately 6200 MPa), and tensile stresses in the metal substrate that ranged from essentially zero to about 55 MPa. It was found further that the intensity of the analytically determined average stresses could be approximated reasonably well by the modification of an equation developed previously by Oxx for stresses induced into bodies by thermal gradients.

Accelerated stress testing of terrestrial solar cells

NASA Technical Reports Server (NTRS)

Prince, J. L.; Lathrop, J. W.

1979-01-01

A program to investigate the reliability characteristics of unencapsulated low-cost terrestrial solar cells using accelerated stress testing is described. Reliability (or parametric degradation) factors appropriate to the cell technologies and use conditions were studied and a series of accelerated stress tests was synthesized. An electrical measurement procedure and a data analysis and management system was derived, and stress test fixturing and material flow procedures were set up after consideration was given to the number of cells to be stress tested and measured and the nature of the information to be obtained from the process. Selected results and conclusions are presented.

HRV Analysis to Identify Stages of Home-based Telerehabilitation Exercise.

PubMed

Jeong, In Cheol; Finkelstein, Joseph

2014-01-01

Spectral analysis of heart rate variability (HRV) has been widely used to investigate activity of autonomous nervous system. Previous studies demonstrated potential of analysis of short-term sequences of heart rate data in a time domain for continuous monitoring of levels of physiological stress however the value of HRV parameters in frequency domain for monitoring cycling exercise has not been established. The goal of this study was to assess whether HRV parameters in frequency domain differ depending on a stage of cycling exercise. We compared major HRV parameters in high, low and very low frequency ranges during rest, height of exercise, and recovery during cycling exercise. Our results indicated responsiveness of frequency-domain indices to different phases of cycling exercise program and their potential in monitoring autonomic balance and stress levels as a part of a tailored home-based telerehabilitation program.

Tool for analysis of early age transverse cracking of composite bridge decks.

DOT National Transportation Integrated Search

2011-08-29

"Executive Summary: Computational methods and associated software were developed : to compute stresses in HP concrete composite bridge decks due to temperature, shrinkage, and : vehicle loading. The structural analysis program uses a layered finite e...

Wearable Biomedical Measurement Systems for Assessment of Mental Stress of Combatants in Real Time

PubMed Central

Seoane, Fernando; Mohino-Herranz, Inmaculada; Ferreira, Javier; Alvarez, Lorena; Buendia, Ruben; Ayllón, David; Llerena, Cosme; Gil-Pita, Roberto

2014-01-01

The Spanish Ministry of Defense, through its Future Combatant program, has sought to develop technology aids with the aim of extending combatants' operational capabilities. Within this framework the ATREC project funded by the “Coincidente” program aims at analyzing diverse biometrics to assess by real time monitoring the stress levels of combatants. This project combines multidisciplinary disciplines and fields, including wearable instrumentation, textile technology, signal processing, pattern recognition and psychological analysis of the obtained information. In this work the ATREC project is described, including the different execution phases, the wearable biomedical measurement systems, the experimental setup, the biomedical signal analysis and speech processing performed. The preliminary results obtained from the data analysis collected during the first phase of the project are presented, indicating the good classification performance exhibited when using features obtained from electrocardiographic recordings and electrical bioimpedance measurements from the thorax. These results suggest that cardiac and respiration activity offer better biomarkers for assessment of stress than speech, galvanic skin response or skin temperature when recorded with wearable biomedical measurement systems. PMID:24759113

Wearable biomedical measurement systems for assessment of mental stress of combatants in real time.

PubMed

Seoane, Fernando; Mohino-Herranz, Inmaculada; Ferreira, Javier; Alvarez, Lorena; Buendia, Ruben; Ayllón, David; Llerena, Cosme; Gil-Pita, Roberto

2014-04-22

The Spanish Ministry of Defense, through its Future Combatant program, has sought to develop technology aids with the aim of extending combatants' operational capabilities. Within this framework the ATREC project funded by the "Coincidente" program aims at analyzing diverse biometrics to assess by real time monitoring the stress levels of combatants. This project combines multidisciplinary disciplines and fields, including wearable instrumentation, textile technology, signal processing, pattern recognition and psychological analysis of the obtained information. In this work the ATREC project is described, including the different execution phases, the wearable biomedical measurement systems, the experimental setup, the biomedical signal analysis and speech processing performed. The preliminary results obtained from the data analysis collected during the first phase of the project are presented, indicating the good classification performance exhibited when using features obtained from electrocardiographic recordings and electrical bioimpedance measurements from the thorax. These results suggest that cardiac and respiration activity offer better biomarkers for assessment of stress than speech, galvanic skin response or skin temperature when recorded with wearable biomedical measurement systems.

Retention System and Splinting on Morse Taper Implants in the Posterior Maxilla by 3D Finite Element Analysis.

PubMed

Lemos, Cleidiel Aparecido Araujo; Verri, Fellippo Ramos; Santiago, Joel Ferreira; Almeida, Daniel Augusto de Faria; Batista, Victor Eduardo de Souza; Noritomi, Pedro Yoshito; Pellizzer, Duardo Piza

2018-01-01

The purpose of this study was to evaluate different retention systems (cement- or screw-retained) and crown designs (non-splinted or splinted) of fixed implant-supported restorations, in terms of stress distributions in implants/components and bone tissue, by 3-dimensional (3D) finite element analysis. Four 3D models were simulated with the InVesalius, Rhinoceros 3D, and SolidWorks programs. Models were made of type III bone from the posterior maxillary area. Models included three 4.0-mm-diameter Morse taper (MT) implants with different lengths, which supported metal-ceramic crowns. Models were processed by the Femap and NeiNastran programs, using an axial force of 400 N and oblique force of 200 N. Results were visualized as the von Mises stress and maximum principal stress (σmax). Under axial loading, there was no difference in the distribution of stress in implants/components between retention systems and splinted crowns; however, in oblique loading, cemented prostheses showed better stress distribution than screwed prostheses, whereas splinted crowns tended to reduce stress in the implant of the first molar. In the bone tissue cemented prostheses showed better stress distribution in bone tissue than screwed prostheses under axial and oblique loading. The splinted design only had an effect in the screwed prosthesis, with no influence in the cemented prosthesis. Cemented prostheses on MT implants showed more favorable stress distributions in implants/components and bone tissue. Splinting was favorable for stress distribution only for screwed prostheses under oblique loading.

Probabilistic structural analysis methods for space transportation propulsion systems

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Moore, N.; Anis, C.; Newell, J.; Nagpal, V.; Singhal, S.

1991-01-01

Information on probabilistic structural analysis methods for space propulsion systems is given in viewgraph form. Information is given on deterministic certification methods, probability of failure, component response analysis, stress responses for 2nd stage turbine blades, Space Shuttle Main Engine (SSME) structural durability, and program plans. .

surf3d: A 3-D finite-element program for the analysis of surface and corner cracks in solids subjected to mode-1 loadings

NASA Technical Reports Server (NTRS)

Raju, I. S.; Newman, J. C., Jr.

1993-01-01

A computer program, surf3d, that uses the 3D finite-element method to calculate the stress-intensity factors for surface, corner, and embedded cracks in finite-thickness plates with and without circular holes, was developed. The cracks are assumed to be either elliptic or part eliptic in shape. The computer program uses eight-noded hexahedral elements to model the solid. The program uses a skyline storage and solver. The stress-intensity factors are evaluated using the force method, the crack-opening displacement method, and the 3-D virtual crack closure methods. In the manual the input to and the output of the surf3d program are described. This manual also demonstrates the use of the program and describes the calculation of the stress-intensity factors. Several examples with sample data files are included with the manual. To facilitate modeling of the user's crack configuration and loading, a companion program (a preprocessor program) that generates the data for the surf3d called gensurf was also developed. The gensurf program is a three dimensional mesh generator program that requires minimal input and that builds a complete data file for surf3d. The program surf3d is operational on Unix machines such as CRAY Y-MP, CRAY-2, and Convex C-220.

Liquid Rocket Booster (LRB) for the Space Transportation System (STS) systems study. Appendix E: Pressure-fed booster test bed for the liquid rocket booster study

NASA Technical Reports Server (NTRS)

1989-01-01

The stress analysis/structural design of the Pressure-Fed Booster Engine Test Bed using the existing F-1 Test Facility Test Stand at Huntsville, Alabama is described. The analysis has been coded and set up for solution on NASTRAN. A separate stress program was established to take the NASTRAN output and perform stress checks on the members. Joint checks and other necessary additional checks were performed by hand. The notes include a brief description of other programs which assist in reproducing and reviewing the NASTRAN results. The redesign of the test stand members and the stress analysis was performed per the A.I.S.C. Code. Loads on the stand consist of the loaded run tanks; wind loads; seismic loads; live loads consisting of snow and ice: live and dead loads of steel; and loaded pressurant bottle. In combining loads, wind loads and seismic loads were each combined with full live loads. Wind and seismic loads were not combined. No one third increase in allowables was taken for the environmental loads except at decks 147 and 214, where the increase was used when considering the stay rods, brackets and stay beams. Wind and seismic loads were considered from each of the four coordinate directions (i.e. N,S,E,W) to give eight basic conditions. The analysis was run with the pressurant tank mounted at level 125. One seismic condition was also run with the tank mounted at levels 169 and 214. No failures were noted with mounting at level 169, but extensive deck failure with mounting at level 214 (the loadsets used are included on the tape, but no detailed results are included in the package). Decking support beams at levels 147 and 214 are not included in the model. The stress program thus does not reduce strut lengths to the length between support beams (the struts are attached to the beams at intersection points) and gives stress ratios larger than one for some of the struts. The affected members were therefore checked by hand.

Hydro-mechanical properties of pressure core sediments recovered from the Krishna-Godavari Basin during India's National Gas Hydrate Program Expedition NGHP-02

NASA Astrophysics Data System (ADS)

Yoneda, J.; Oshima, M.; Kida, M.; Kato, A.; Konno, Y.; Jin, Y.; Waite, W. F.; Jang, J.; Kumar, P.; Tenma, N.

2017-12-01

Pressure coring and analysis technology allows for gas hydrate to be recovered from the deep seabed, transferred to the laboratory and characterized while continuously maintaining gas hydrate stability. For this study, dozens of hydrate-bearing pressure core sediment subsections recovered from the Krishna-Godavari Basin during India's National Gas Hydrate Program Expedition NGHP-02 were tested with Pressure Core Non-destructive Analysis Tools (PNATs) through a collaboration between Japan and India. PNATs, originally developed by AIST as a part of the Japanese National hydrate research program (MH21, funded by METI) conducted permeability, compression and consolidation tests under various effective stress conditions, including the in situ stress state estimated from downhole bulk density measurements. At the in situ effective stress, gas hydrate-bearing sediments had an effective permeability range of 0.01-10mD even at pore-space hydrate saturations above 60%. Permeability increased by 10 to 100 times after hydrate dissociation at the same effective stress, but these post-dissociation gains were erased when effective stress was increased from in situ values ( 1 MPa) to 10MPa in a simulation of the depressurization method for methane extraction from hydrate. Vertical-to-horizontal permeability anisotropy was also investigated. First-ever multi-stage loading tests and strain-rate alternation compression tests were successfully conducted for evaluating sediment strengthening dependence on the rate and magnitude of effective confining stress changes. In addition, oedometer tests were performed up to 40MPa of consolidation stress to simulate the depressurization method in ultra-deep sea environments. Consolidation curves measured with and without gas hydrate were investigated over a wide range of effective confining stresses. Compression curves for gas hydrate-bearing sediments were convex downward due to high hydrate saturations. Consolidation tests show that, regardless of the consolidation history with hydrate in place, the consolidation behavior after dissociation will first return to, then follow, the original normal consolidation curve for the hydrate-free host sediment.

Perceived stress and fatigue among students in a doctor of chiropractic training program.

PubMed

Kizhakkeveettil, Anupama; Vosko, Andrew M; Brash, Marissa; Ph, Dr; Philips, Michael A

2017-03-01

High levels of stress and fatigue are associated with decreased academic success, well-being, and quality of life. The objective of this research was to quantify levels of perceived stress and fatigue among chiropractic students to identify sources of and student coping mechanisms for perceived stress and fatigue and to identify the relationship between students' perceived stress and fatigue. A survey comprised of the Perceived Stress Scale, the Undergraduate Sources of Stress Survey, and the Piper Fatigue Scale was administered to chiropractic students in their 2nd, 5th, and 8th trimesters of doctoral study. Data were analyzed by descriptive statistics, 1-way analysis of variance, and linear correlation tests. Students reported having moderate to high levels of stress and fatigue, with higher levels of stress and fatigue seen in women than in men. A nonsignificant difference among stress scores and a significant difference among fatigue scores were observed based on program term. Levels of stress predicted levels of fatigue, and stress was strongly correlated with psychological health, relationships with family members, mood, and need for learning accommodations. Fatigue was strongly correlated with psychological health, academic demands, and conflicts between studies and other activities. There are differences in the reporting of perceived stress and fatigue levels in this chiropractic student population based on gender. The correlation between fatigue and stress also suggests that measures that may alleviate one may likely affect the other.

Analysis of the stress state in an Iosipescu sheartest specimen

NASA Technical Reports Server (NTRS)

Walrath, D. E.; Adams, D. F.

1983-01-01

The state of stress in an Iosipescu shear test specimen is analyzed, utilizing a finite element computer program. The influence of test fixture configuration on this stress state is included. Variations of the standard specimen configuration, including notch depth, notch angle, and notch root radius are modeled. The purpose is to establish guidelines for a specimen geometry which will accommodate highly orthotropic materials while minimizing stress distribution nonuniformities. Materials ranging from isotropic to highly orthotropic are considered. An optimum specimen configuration is suggested, along with changes in the test fixture.

The effect of parent education program for preschool children with developmental disabilities: A randomized controlled trial.

PubMed

Leung, Cynthia; Chan, Stanley; Lam, Tiney; Yau, Sharon; Tsang, Sandra

2016-09-01

This study aimed to evaluate the efficacy of a parent education program, the Happy Parenting program, for Chinese preschool children with developmental disabilities. This study adopted randomized controlled trial design without blinding. Participants were randomized into intervention group (n=62) who were offered the Happy Parenting program delivered by educational psychologists and trainee educational psychologists, and a control group (n=57) who were offered a parent talk after the intervention group had completed treatment. Parent participants were requested to complete questionnaires on their children's behavior, their parenting stress, and discipline strategies. Analysis was by intention-to-treat. The results indicated significant decrease in child problem behaviors, parenting stress and dysfunctional discipline strategies in the intervention group at post-intervention. This study provided promising evidence on the effectiveness of a parent education program, the Happy Parenting program, for Chinese preschool children with developmental disabilities. Copyright © 2016 Elsevier Ltd. All rights reserved.

User's manual for GAMNAS: Geometric and Material Nonlinear Analysis of Structures

NASA Technical Reports Server (NTRS)

Whitcomb, J. D.; Dattaguru, B.

1984-01-01

GAMNAS (Geometric and Material Nonlinear Analysis of Structures) is a two dimensional finite-element stress analysis program. Options include linear, geometric nonlinear, material nonlinear, and combined geometric and material nonlinear analysis. The theory, organization, and use of GAMNAS are described. Required input data and results for several sample problems are included.

High Temperature Composite Analyzer (HITCAN) demonstration manual, version 1.0

NASA Technical Reports Server (NTRS)

Singhal, S. N; Lackney, J. J.; Murthy, P. L. N.

1993-01-01

This manual comprises a variety of demonstration cases for the HITCAN (HIgh Temperature Composite ANalyzer) code. HITCAN is a general purpose computer program for predicting nonlinear global structural and local stress-strain response of arbitrarily oriented, multilayered high temperature metal matrix composite structures. HITCAN is written in FORTRAN 77 computer language and has been configured and executed on the NASA Lewis Research Center CRAY XMP and YMP computers. Detailed description of all program variables and terms used in this manual may be found in the User's Manual. The demonstration includes various cases to illustrate the features and analysis capabilities of the HITCAN computer code. These cases include: (1) static analysis, (2) nonlinear quasi-static (incremental) analysis, (3) modal analysis, (4) buckling analysis, (5) fiber degradation effects, (6) fabrication-induced stresses for a variety of structures; namely, beam, plate, ring, shell, and built-up structures. A brief discussion of each demonstration case with the associated input data file is provided. Sample results taken from the actual computer output are also included.

A review of some problems in global-local stress analysis

NASA Technical Reports Server (NTRS)

Nelson, Richard B.

1989-01-01

The various types of local-global finite-element problems point out the need to develop a new generation of software. First, this new software needs to have a complete analysis capability, encompassing linear and nonlinear analysis of 1-, 2-, and 3-dimensional finite-element models, as well as mixed dimensional models. The software must be capable of treating static and dynamic (vibration and transient response) problems, including the stability effects of initial stress, and the software should be able to treat both elastic and elasto-plastic materials. The software should carry a set of optional diagnostics to assist the program user during model generation in order to help avoid obvious structural modeling errors. In addition, the program software should be well documented so the user has a complete technical reference for each type of element contained in the program library, including information on such topics as the type of numerical integration, use of underintegration, and inclusion of incompatible modes, etc. Some packaged information should also be available to assist the user in building mixed-dimensional models. An important advancement in finite-element software should be in the development of program modularity, so that the user can select from a menu various basic operations in matrix structural analysis.

The Effects of Program Structure on Dissertation Writing in "Online Academia": A Qualitative Analysis of Online Doctoral Student Experiences

ERIC Educational Resources Information Center

Goodwin-Lee, Regina

2010-01-01

Writing the dissertation can be one of the most stressful experiences in the doctoral education experience. Previous research findings indicate that traditional psychology doctoral candidates (PDC) identify the graduate school experience, and the dissertation process in particular as stress-inducing, isolating and key obstacles to graduation.…

Analysis of thermal stresses and metal movement during welding

NASA Technical Reports Server (NTRS)

Muraki, T.; Pattee, F. M.; Masubuchi, K.

1974-01-01

Finite element computer programs were developed to determine thermal stresses and metal movement during butt welding of flat plates and bead-on-plate welding along the girth of a cylindrical shell. Circular cylindrical shells of 6061 aluminum alloy were used for the tests. Measurements were made of changes in temperature and thermal strains during the welding process.

A Framework for Implementing TQM in Higher Education Programs

ERIC Educational Resources Information Center

Venkatraman, Sitalakshmi

2007-01-01

Purpose: This paper aims to provide a TQM framework that stresses continuous improvements in teaching as a plausible means of TQM implementation in higher education programs. Design/methodology/approach: The literature survey of the TQM philosophies and the comparative analysis of TQM adoption in industry versus higher education provide the…

NASA's Software Bank (Heath Tecna Aerospace)

NASA Technical Reports Server (NTRS)

1991-01-01

Heath Tecna Aerospace used a COSMIC program, "Analysis of Filament Reinforced Metal Shell Pressure Vessels," to predict stresses in motorcase walls in a composite hybrid rocket and calculate the ideal geometry for the domes at either end of the filament-wound pressure vessel. The COSMIC program predictions were confirmed in testing.

Three-dimensional finite-element elastic analysis of a thermally cycled single-edge wedge geometry specimen

NASA Technical Reports Server (NTRS)

Bizon, P. T.; Hill, R. J.; Guilliams, B. P.; Drake, S. K.; Kladden, J. L.

1979-01-01

An elastic stress analysis was performed on a wedge specimen (prismatic bar with single-wedge cross section) subjected to thermal cycles in fluidized beds. Seven different combinations consisting of three alloys (NASA TAZ-8A, 316 stainless steel, and A-286) and four thermal cycling conditions were analyzed. The analyses were performed as a joint effort of two laboratories using different models and computer programs (NASTRAN and ISO3DQ). Stress, strain, and temperature results are presented.

The dehydration stress of couch grass is associated with its lipid metabolism, the induction of transporters and the re-programming of development coordinated by ABA.

PubMed

Janská, Anna; Svoboda, Pavel; Spiwok, Vojtěch; Kučera, Ladislav; Ovesná, Jaroslava

2018-05-02

The wild relatives of crop species represent a potentially valuable source of novel genetic variation, particularly in the context of improving the crop's level of tolerance to abiotic stress. The mechanistic basis of these tolerances remains largely unexplored. Here, the focus was to characterize the transcriptomic response of the nodes (meristematic tissue) of couch grass (a relative of barley) to dehydration stress, and to compare it to that of the barley crown formed by both a drought tolerant and a drought sensitive barley cultivar. Many of the genes up-regulated in the nodes by the stress were homologs of genes known to be mediated by abscisic acid during the response to drought, or were linked to either development or lipid metabolism. Transporters also featured prominently, as did genes acting on root architecture. The resilience of the couch grass node arise from both their capacity to develop an altered, more effective root architecture, but also from their formation of a lipid barrier on their outer surface and their ability to modify both their lipid metabolism and transporter activity when challenged by dehydration stress. Our analysis revealed the nature of dehydration stress response in couch grass. We suggested the tolerance is associated with lipid metabolism, the induction of transporters and the re-programming of development coordinated by ABA. We also proved the applicability of barley microarray for couch grass stress-response analysis.

Effect of Transcendental Meditation on Employee Stress, Depression, and Burnout: A Randomized Controlled Study

PubMed Central

Elder, Charles; Nidich, Sanford; Moriarty, Francis; Nidich, Randi

2014-01-01

Context: Workplace stress and burnout are pervasive problems, affecting employee performance and personal health. Objective: To evaluate the effects of the Transcendental Meditation program on psychological distress and burnout among staff at a residential therapeutic school for students with severe behavioral problems. Design: A total of 40 secondary schoolteachers and support staff at the Bennington School in Vermont, a therapeutic school for children with behavioral problems, were randomly assigned to either practice of the Transcendental Meditation program or a wait-list control group. The Transcendental Meditation course was provided by certified instructors. Main Outcome Measures: Outcome measures were assessed at baseline and at four months, and included perceived stress, depression, and burnout. A multivariate analysis of covariance was used to determine overall effects. Results: Analysis of the 4-month intervention data indicated a significant improvement in the main outcomes of the study resulting from practice of the Transcendental Meditation program compared with controls (Wilks Λ [3,28] = 0.695; p = 0.019). Results of univariate F tests indicated a significant reduction of all main outcome measures: perceived stress (F[1,32] = 13.42; p = < 0.001); depression (F[1,32] = 6.92; p = 0.013); and overall teacher burnout (F[1,32] = 6.18; p = 0.018). Effect sizes ranged from 0.40 to 0.94. Conclusions: The Transcendental Meditation program was effective in reducing psychological distress in teachers and support staff working in a therapeutic school for students with behavioral problems. These findings have important implications for employees’ job performance as well as their mental and physical health. PMID:24626068

Effect of transcendental meditation on employee stress, depression, and burnout: a randomized controlled study.

PubMed

Elder, Charles; Nidich, Sanford; Moriarty, Francis; Nidich, Randi

2014-01-01

Workplace stress and burnout are pervasive problems, affecting employee performance and personal health. To evaluate the effects of the Transcendental Meditation program on psychological distress and burnout among staff at a residential therapeutic school for students with severe behavioral problems. A total of 40 secondary schoolteachers and support staff at the Bennington School in Vermont, a therapeutic school for children with behavioral problems, were randomly assigned to either practice of the Transcendental Meditation program or a wait-list control group. The Transcendental Meditation course was provided by certified instructors. Outcome measures were assessed at baseline and four months, and included perceived stress, depression, and burnout. A multivariate analysis of covariance was used to determine overall effects. Analysis of the 4-month intervention data indicated a significant improvement in the main outcomes of the study resulting from practice of the Transcendental Meditation program compared with controls (Wilks Λ [3,28] = 0.695; p = 0.019). Results of univariate F tests indicated a significant reduction of all main outcome measures: perceived stress (F[1,32] = 13.42; p = < 0.001); depression (F[1,32] = 6.92; p = 0.013); and overall teacher burnout (F[1,32] = 6.18; p = 0.018). Effect sizes ranged from 0.40 to 0.94. The Transcendental Meditation program was effective in reducing psychological distress in teachers and support staff working in a therapeutic school for students with behavioral problems. These findings have important implications for employees’ job performance as well as their mental and physical health.

Anatomical evaluation and stress distribution of intact canine femur.

PubMed

Verim, Ozgur; Tasgetiren, Suleyman; Er, Mehmet S; Ozdemir, Vural; Yuran, Ahmet F

2013-03-01

In the biomedical field, three-dimensional (3D) modeling and analysis of bones and tissues has steadily gained in importance. The aim of this study was to produce more accurate 3D models of the canine femur derived from computed tomography (CT) data by using several modeling software programs and two different methods. The accuracy of the analysis depends on the modeling process and the right boundary conditions. Solidworks, Rapidform, Inventor, and 3DsMax software programs were used to create 3D models. Data derived from CT were converted into 3D models using two different methods: in the first, 3D models were generated using boundary lines, while in the second, 3D models were generated using point clouds. Stress analyses in the models were made by ANSYS v12, also considering any muscle forces acting on the canine femur. When stress values and statistical values were taken into consideration, more accurate models were obtained with the point cloud method. It was found that the maximum von Mises stress on the canine femur shaft was 34.8 MPa. Stress and accuracy values were obtained from the model formed using the Rapidform software. The values obtained were similar to those in other studies in the literature. Copyright © 2012 John Wiley & Sons, Ltd.

Probabilistic analysis of a materially nonlinear structure

NASA Technical Reports Server (NTRS)

Millwater, H. R.; Wu, Y.-T.; Fossum, A. F.

1990-01-01

A probabilistic finite element program is used to perform probabilistic analysis of a materially nonlinear structure. The program used in this study is NESSUS (Numerical Evaluation of Stochastic Structure Under Stress), under development at Southwest Research Institute. The cumulative distribution function (CDF) of the radial stress of a thick-walled cylinder under internal pressure is computed and compared with the analytical solution. In addition, sensitivity factors showing the relative importance of the input random variables are calculated. Significant plasticity is present in this problem and has a pronounced effect on the probabilistic results. The random input variables are the material yield stress and internal pressure with Weibull and normal distributions, respectively. The results verify the ability of NESSUS to compute the CDF and sensitivity factors of a materially nonlinear structure. In addition, the ability of the Advanced Mean Value (AMV) procedure to assess the probabilistic behavior of structures which exhibit a highly nonlinear response is shown. Thus, the AMV procedure can be applied with confidence to other structures which exhibit nonlinear behavior.

Micromechanical combined stress analysis: MICSTRAN, a user manual

NASA Technical Reports Server (NTRS)

Naik, R. A.

1992-01-01

Composite materials are currently being used in aerospace and other applications. The ability to tailor the composite properties by the appropriate selection of its constituents, the fiber and matrix, is a major advantage of composite materials. The Micromechanical Combined Stress Analysis (MICSTRAN) code provides the materials engineer with a user-friendly personal computer (PC) based tool to calculate overall composite properties given the constituent fiber and matrix properties. To assess the ability of the composite to carry structural loads, the materials engineer also needs to calculate the internal stresses in the composite material. MICSTRAN is a simple tool to calculate such internal stresses with a composite ply under combined thermomechanical loading. It assumes that the fibers have a circular cross-section and are arranged either in a repeating square or diamond array pattern within a ply. It uses a classical elasticity solution technique that has been demonstrated to calculate accurate stress results. Input to the program consists of transversely isotropic fiber properties and isotropic matrix properties such as moduli, Poisson's ratios, coefficients of thermal expansion, and volume fraction. Output consists of overall thermoelastic constants and stresses. Stresses can be computed under the combined action of thermal, transverse, longitudinal, transverse shear, and longitudinal shear loadings. Stress output can be requested along the fiber-matrix interface, the model boundaries, circular arcs, or at user-specified points located anywhere in the model. The MICSTRAN program is Windows compatible and takes advantage of the Microsoft Windows graphical user interface which facilitates multitasking and extends memory access far beyond the limits imposed by the DOS operating system.

Reduced Trauma Symptoms and Perceived Stress in Male Prison Inmates through the Transcendental Meditation Program: A Randomized Controlled Trial.

PubMed

Nidich, Sanford; O'connor, Tom; Rutledge, Thomas; Duncan, Jeff; Compton, Blaze; Seng, Angela; Nidich, Randi

2016-01-01

Trauma events are four times more prevalent in inmates than in the general public and are associated with increased recidivism and other mental and physical health issues. To evaluate the effects of Transcendental Meditation (TM) on trauma symptoms in male inmates. One hundred eighty-one inmates with a moderate- to high-risk criminal profile were randomly assigned to either the TM program or to a usual care control group. The Trauma Symptom Checklist and the Perceived Stress Scale were administered at baseline and four-month posttest. Significant reductions in total trauma symptoms, anxiety, depression, dissociation, and sleep disturbance subscales, and perceived stress in the TM group were found compared with controls (all p values < 0.001). The high-trauma subgroup analysis further showed a higher magnitude of effects in the TM group compared with controls on all outcomes, with Cohen effect sizes ranging from 0.67 to 0.89. Results are consistent with those of prior studies of the TM program in other populations and its effects on trauma symptoms and perceived stress.

Effects of a rational-emotive health education intervention on stress management and irrational beliefs among technical college teachers in Southeast Nigeria.

PubMed

Ugwoke, Samuel C; Eseadi, Chiedu; Igbokwe, Chima C; Chiaha, Gertrude T U; Nwaubani, Okechukwu O; Orji, Chibueze Tobias; Ugwuanyi, Leonard T; Chukwuma, Ifeoma S; Edikpa, Edith C; Ogakwu, Vera N; Onu, Eucharia A; Agu, Patricia; Nwobi, Ujunwa A; Omeke, Faith; Okeke, Francisca C; Ezema, Rita N; Abugu, Lawretta I

2017-08-01

Stress is the product of how an individual reacts and adapts to the specific demands and threats they encounter while carrying out given tasks. The main purpose of this study was to investigate the effects of a rational-emotive health education intervention (REHEI) on stress management, and irrational beliefs in a sample of technical college teachers in Southeast Nigeria. The study design was a pretest-posttest control group. Repeated measures analysis of variance, paired t test and Mann-Whitney U tests were used to analyze the data collected. The REHEI significantly reduced teacher stress in those teaching staff exposed to the treatment intervention, relative to a waitlist control group. Furthermore, the REHEI program significantly decreased irrational beliefs about teaching in those teaching staff exposed to the treatment intervention compared to a waitlist control group. The REHEI program can be used to coach teachers on how to manage and cope with stress and overcome irrational beliefs in teaching.

Interactive effects of work psychosocial factors on participation in workplace wellness programs.

PubMed

Sangachin, Mahboobeh Ghesmaty; Cavuoto, Lora A

2018-01-01

This study explored concurrent effects of six work psychosocial factors on current participation and the self-reported likelihood of future participation in workplace wellness programs using a cross-sectional survey, an ad hoc focus group, and structured interviews. Classification and regression tree analysis was used to analyze survey responses from 343 employees (194 nonparticipants, 95 participants, and 54 engaged participants). A thematic analysis of focus group ( n = 7) and interview ( n = 5) narratives was also undertaken. In combination with high work control, high superior support was associated with an engaged participant profile. Job demand was the third important variable with low and very high levels associated with participation. With regard to high likelihood of future participation, among respondents with age older than 50, high predictability of occupational activities and control were identified as a significant factor, and among others, high superior support and control. The analysis of narratives revealed peer relations and flexible working hours to be positively linked to participation and general job stress was identified as having a bidirectional relationship. Employees stated that stress led them to take advantage of these programs as a source of relief and that their availability/participation has contributed to lowering their stress. These findings inform practitioners about the importance of addressing poor psychosocial factors as a participation barrier and having a holistic approach to employee well-being.

Simplified and refined finite element approaches for determining stresses and internal forces in geometrically nonlinear structural analysis

NASA Technical Reports Server (NTRS)

Robinson, J. C.

1979-01-01

Two methods for determining stresses and internal forces in geometrically nonlinear structural analysis are presented. The simplified approach uses the mid-deformed structural position to evaluate strains when rigid body rotation is present. The important feature of this approach is that it can easily be used with a general-purpose finite-element computer program. The refined approach uses element intrinsic or corotational coordinates and a geometric transformation to determine element strains from joint displacements. Results are presented which demonstrate the capabilities of these potentially useful approaches for geometrically nonlinear structural analysis.

Finite element stress analysis of the human left ventricle whose irregular shape is developed from single plane cineangiocardiogram

NASA Technical Reports Server (NTRS)

Ghista, D. N.; Hamid, M. S.

1977-01-01

The three-dimensional left ventricular chamber geometrical model is developed from single plane cineangiocardiogram. This left ventricular model is loaded by an internal pressure monitored by cardiac catheterization. The resulting stresses in the left ventricular model chamber's wall are determined by computerized finite element procedure. For the discretization of this left ventricular model structure, a 20-node, isoparametric finite element is employed. The analysis and formulation of the computerised procedure is presented in the paper, along with the detailed algorithms and computer programs. The procedure is applied to determine the stresses in a left ventricle at an instant, during systole. Next, a portion (represented by a finite element) of this left ventricular chamber is simulated as being infarcted by making its active-state modulus value equal to its passive-state value; the neighbouring elements are shown to relieve the 'infarcted' element of stress by themselves taking on more stress.

Examining mindfulness-based stress reduction: Perceptions from minority older adults residing in a low-income housing facility

PubMed Central

2011-01-01

Background Mindfulness-based stress reduction (MBSR) programs are becoming increasingly common, but have not been studied in low income minority older populations. We sought to understand which parts of MBSR were most important to practicing MBSR members of this population, and to understand whether they apply their training to daily challenges. Methods We conducted three focus groups with 13 current members of an MBSR program. Participants were African American women over the age of 60 in a low-income housing residence. We tape recorded each session and subsequently used inductive content analysis to identify primary themes. Results and discussion Analysis of the focus group responses revealed three primary themes stress management, applying mindfulness, and the social support of the group meditation. The stressors they cited using MBSR with included growing older with physical pain, medical tests, financial strain, and having grandchildren with significant mental, physical, financial or legal hardships. We found that participants particularly used their MBSR training for coping with medical procedures, and managing both depression and anger. Conclusion A reflective stationary intervention delivered in-residence could be an ideal mechanism to decrease stress in low-income older adult's lives and improve their health. PMID:21627807

Methods for structural design at elevated temperatures

NASA Technical Reports Server (NTRS)

Ellison, A. M.; Jones, W. E., Jr.; Leimbach, K. R.

1973-01-01

A procedure which can be used to design elevated temperature structures is discussed. The desired goal is to have the same confidence in the structural integrity at elevated temperature as the factor of safety gives on mechanical loads at room temperature. Methods of design and analysis for creep, creep rupture, and creep buckling are presented. Example problems are included to illustrate the analytical methods. Creep data for some common structural materials are presented. Appendix B is description, user's manual, and listing for the creep analysis program. The program predicts time to a given creep or to creep rupture for a material subjected to a specified stress-temperature-time spectrum. Fatigue at elevated temperature is discussed. Methods of analysis for high stress-low cycle fatigue, fatigue below the creep range, and fatigue in the creep range are included. The interaction of thermal fatigue and mechanical loads is considered, and a detailed approach to fatigue analysis is given for structures operating below the creep range.

Association between Travel Times and Food Procurement Practices among Female Supplemental Nutrition Assistance Program Participants in Eastern North Carolina

ERIC Educational Resources Information Center

Jilcott, Stephanie B.; Moore, Justin B.; Wall-Bassett, Elizabeth D.; Liu, Haiyong; Saelens, Brian E.

2011-01-01

Objective: To examine associations between self-reported vehicular travel behaviors, perceived stress, food procurement practices, and body mass index among female Supplemental Nutrition Assistance Program (SNAP) participants. Analysis: The authors used correlation and regression analyses to examine cross-sectional associations between travel time…

Development of a situational initiation training program for preceptors to retain new graduate nurses: Process and initial outcomes.

PubMed

Kang, Chun-Mei; Chiu, Hsiao-Ting; Lin, Yen-Kuang; Chang, Wen-Yin

2016-02-01

Most preceptor training programs consist of classroom-based courses, and only a few programs are conducted using films. Preceptors have identified most training courses as inapplicable in various clinical situations. To describe the systematic development of a situational initiation training program (SITP) for preceptors and to evaluate its impacts on the stress levels of preceptors and new graduate nurses (NGNs), the preceptor-NGN relationship, support provided by preceptors to NGNs, and the intention to leave among NGNs during a 1-year preceptorship. The conceptual framework of development, implementation, and evaluation was used for program completion. Preceptors and NGNs working at a teaching medical center in Taipei participated. The 1-day SITP workshop comprised four films, reflection time, and four classroom-based courses. Training outcomes were evaluated using a questionnaire survey for preceptors and NGNs at months 3, 6, 9, and 12 after employing the NGNs. Data were analyzed using descriptive statistics and analysis of variance with repeated measures. The annual turnover rate of NGNs was 10.5%. During the first preceptorship year, the NGNs reported moderate stress levels, good to excellent relationships with their preceptors, moderate to excellent support from their preceptors, and low intention to leave their current jobs. Similarly, preceptors reported moderate stress levels, except at month 12 (mean=4.8), and good to excellent relationships with their NGNs. The SITP considerably improved the preceptor-NGN relationship for both NGNs and preceptors, whereas no improvement was observed in the stress levels, except in the stress levels of preceptors. The SITP is clinically effective for preceptors; thus, nurse educators may apply the SITP for redesigning the existing preceptor training programs to develop highly skilled preceptors and improve training outcomes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Barriers to Participation in Parenting Programs: The Relationship between Parenting Stress, Perceived Barriers, and Program Completion.

PubMed

Rostad, Whitney L; Moreland, Angela D; Valle, Linda Anne; Chaffin, Mark J

2018-04-01

Families experiencing child maltreatment or risk factors for child maltreatment often receive referrals to interventions focused on changing parenting practices. Compliance with specific parenting programs can be challenging as many of the stressors that place families at-risk may also interfere with program participation. Because families may receive limited benefit from programs they do not fully receive, it is critical to understand the relationship between parenting stress and barriers to program completion. We used structural equation modeling to examine the relationship among parenting stress, perceived barriers to program participation, and program completion in two datasets involving low-income parents. Data were collected at two time points from a sample of parents involved with child welfare services and a sample of parents considered at-risk of future involvement (total study n = 803). Direct paths from parenting stress at time 1 to barriers to participation and parenting stress at time 2, and from parenting stress at time 2 to program completion were significant. Interestingly, increased barriers to participation were related to increased parenting stress at time 2, and greater parenting stress was related to increased program completion. Results suggest that with increasing levels of parenting stress, parents have an increased likelihood of completing the program. Assessing and addressing the influence of perceived barriers and parenting stress on program participation may decrease the likelihood of treatment attrition.

Finite Element Analysis of the Endodontically-treated Maxillary Premolars restored with Composite Resin along with Glass Fiber Insertion in Various Positions.

PubMed

Navimipour, Elmira Jafari; Firouzmandi, Maryam; Mirhashemi, Fatemeh Sadat

2015-04-01

This study evaluated the effect of three methods of glass fiber insertion on stress distribution pattern and cusp movement of the root-filled maxillary premolars using finite element method (FEM) analysis. A three-dimensional (3 D) FEM model of a sound upper premolar tooth and four models of root-filled upper premolars with mesiocclusodistal (MOD) cavities were molded and restored with: (1) Composite resin only (NF); (2) Composite resin along with a ribbon of glass fiber placed in the occlusal third (OF); (3) Composite resin along with a ribbon of glass fiber placed circumferentially in the cervical third (CF), and (4) Composite resin along with occlusal and circumferential fibers (OCF). A static vertical load was applied to calculate the stress distributions. Structural analysis program by Solidworks were used for FEM analysis. Von-Mises stress values and cusp movements induced by occlusal loading were evaluated. Maximum Von-Mises stress of enamel occurred in sound tooth, followed by NF, CF, OF and OCF. Maximum Von-Mises stress of dentin occurred in sound tooth, followed by OF, OCF, CF and NF. Stress distribution patterns of OF and OCF were similar. Maximum overall stress values were concentrated in NF. Although stress distribution patterns of NF and CF were found as similar, CF showed lower stress values. Palatal cusp movement was more than buccal cusp in all of the models. The results of our study indicated that while the circumferential fiber had little effect on overall stress concentration, it provided a more favorable stress distribution pattern in cervical region. The occlusal fiber reduced the average stress in the entire structure but did not reduce cuspal movement. Incorporating glass fiber in composite restorations may alter the stress state within the structure depending on fiber position.

[Personal traits and a sense of job-related stress in a military aviation crew].

PubMed

Cabarkapa, Milanko; Korica, Vesna; Rodjenkov, Sanja

2011-02-01

Accelerated technological and organizational changes in numerous professions lead to increase in job-related stress. Since these changes are particularly common in military aviation, this study examined the way military aviation crew experiences job-related stress during a regular aviation drill, depending on particular social-demographic factors and personal traits. The modified Cooper questionnaire was used to examine the stress related factors at work. The questionnaire was adapted for the aviation crew in the army environment. Personal characteristics were examined using the NEO-PI-R personality inventory. The study included 50 examinees (37 pilots and 13 other crew members) employed in the Serbian Army. The studies were performed during routine physical examinations at the Institute for Aviation Medicine during the year 2007. Statistical analysis of the study results contained descriptive analysis, one-way analysis of variance and correlation analysis. It was shown that army aviation crew works under high stress. The highest stress value had the intrinsic factor (AS = 40.94) and role in organisation (AS = 39.92), while the lowest one had the interpersonal relationship factor (AS = 29.98). The results also showed that some social-demographic variables (such as younger examinees, shorter working experience) and neuroticism as a personality trait, were in correlation with job-related stress. Stress evaluation and certain personality characteristics examination can be used for the development of the basic anti-stress programs and measures in order to achieve better psychological selection, adaptation career leadership and organization of military pilots and other crew members.

Sociodemographic Differences in the Association Between Obesity and Stress: A Propensity Score-Matched Analysis from the Korean National Health and Nutrition Examination Survey (KNHANES).

PubMed

Mak, Kwok-Kei; Kim, Dae-Hwan; Leigh, J Paul

2015-01-01

Few population-based studies have used an econometric approach to understand the association between two cancer risk factors, obesity and stress. This study investigated sociodemographic differences in the association between obesity and stress among Korean adults (6,546 men and 8,473 women). Data were drawn from the Korean National Health and Nutrition Examination Survey for 2008, 2009, and 2010. Ordered logistic regression models and propensity score matching methods were used to examine the associations between obesity and stress, stratified by gender and age groups. In women, the stress level of the obese group was found to be 27.6% higher than the nonobese group in the ordered logistic regression; the obesity effect on stress was statistically significant in the propensity score-matched analysis. Corresponding evidence for the effect of obesity on stress was lacking among men. Participants who were young, well-educated, and working were more likely to report stress. In Korea, obesity causes stress in women but not in men. Young women are susceptible to a disproportionate level of stress. More cancer prevention programs targeting young and obese women are encouraged in developed Asian countries.

Reliability analysis of laminated CMC components through shell subelement techniques

NASA Technical Reports Server (NTRS)

Starlinger, Alois; Duffy, Stephen F.; Gyekenyesi, John P.

1992-01-01

An updated version of the integrated design program Composite Ceramics Analysis and Reliability Evaluation of Structures (C/CARES) was developed for the reliability evaluation of ceramic matrix composites (CMC) laminated shell components. The algorithm is now split into two modules: a finite-element data interface program and a reliability evaluation algorithm. More flexibility is achieved, allowing for easy implementation with various finite-element programs. The interface program creates a neutral data base which is then read by the reliability module. This neutral data base concept allows easy data transfer between different computer systems. The new interface program from the finite-element code Matrix Automated Reduction and Coupling (MARC) also includes the option of using hybrid laminates (a combination of plies of different materials or different layups) and allows for variations in temperature fields throughout the component. In the current version of C/CARES, a subelement technique was implemented, enabling stress gradients within an element to be taken into account. The noninteractive reliability function is now evaluated at each Gaussian integration point instead of using averaging techniques. As a result of the increased number of stress evaluation points, considerable improvements in the accuracy of reliability analyses were realized.

Ceramics Analysis and Reliability Evaluation of Structures (CARES). Users and programmers manual

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Manderscheid, Jane M.; Gyekenyesi, John P.

1990-01-01

This manual describes how to use the Ceramics Analysis and Reliability Evaluation of Structures (CARES) computer program. The primary function of the code is to calculate the fast fracture reliability or failure probability of macroscopically isotropic ceramic components. These components may be subjected to complex thermomechanical loadings, such as those found in heat engine applications. The program uses results from MSC/NASTRAN or ANSYS finite element analysis programs to evaluate component reliability due to inherent surface and/or volume type flaws. CARES utilizes the Batdorf model and the two-parameter Weibull cumulative distribution function to describe the effect of multiaxial stress states on material strength. The principle of independent action (PIA) and the Weibull normal stress averaging models are also included. Weibull material strength parameters, the Batdorf crack density coefficient, and other related statistical quantities are estimated from four-point bend bar or unifrom uniaxial tensile specimen fracture strength data. Parameter estimation can be performed for single or multiple failure modes by using the least-square analysis or the maximum likelihood method. Kolmogorov-Smirnov and Anderson-Darling goodness-of-fit tests, ninety percent confidence intervals on the Weibull parameters, and Kanofsky-Srinivasan ninety percent confidence band values are also provided. The probabilistic fast-fracture theories used in CARES, along with the input and output for CARES, are described. Example problems to demonstrate various feature of the program are also included. This manual describes the MSC/NASTRAN version of the CARES program.

Programs for analysis and resizing of complex structures. [computerized minimum weight design

NASA Technical Reports Server (NTRS)

Haftka, R. T.; Prasad, B.

1978-01-01

The paper describes the PARS (Programs for Analysis and Resizing of Structures) system. PARS is a user oriented system of programs for the minimum weight design of structures modeled by finite elements and subject to stress, displacement, flutter and thermal constraints. The system is built around SPAR - an efficient and modular general purpose finite element program, and consists of a series of processors that communicate through the use of a data base. An efficient optimizer based on the Sequence of Unconstrained Minimization Technique (SUMT) with an extended interior penalty function and Newton's method is used. Several problems are presented for demonstration of the system capabilities.

Identification and analysis of factors affecting thermal shock resistance of ceramic materials in solar receivers

NASA Technical Reports Server (NTRS)

Hasselman, D. P. H.; Singh, J. P.; Satyamurthy, K.

1980-01-01

An analysis was conducted of the possible modes of thermal stress failure of brittle ceramics for potential use in point-focussing solar receivers. The pertinent materials properties which control thermal stress resistance were identified for conditions of steady-state and transient heat flow, convective and radiative heat transfer, thermal buckling and thermal fatigue as well as catastrophic crack propagation. Selection rules for materials with optimum thermal stress resistance for a particular thermal environment were identified. Recommendations for materials for particular components were made. The general requirements for a thermal shock testing program quantitatively meaningful for point-focussing solar receivers were outlined. Recommendations for follow-on theoretical analyses were made.

Effectiveness of a workplace-based intervention program to promote mental health among employees in privately owned enterprises in China.

PubMed

Sun, Jing; Buys, Nicholas; Wang, Xinchao

2013-12-01

This study aims to examine the effectiveness of a workplace-based intervention program to improve mental health, work ability, and work productivity in privately owned enterprises in China. A prospective cohort intervention study design was employed in which the intervention program was implemented for 30 months (from July 2009 to December 2012). Nine privately owned retail enterprises in China participated in the intervention study. Researchers administered a self-report survey to 2768 employees. The research team measured participants' job stress, resilience, work ability, absenteeism, depression, and work performance. A comprehensive Health Promotion Enterprise Program was implemented that entailed the following components: policies to support a healthy work environment, psychosocial interventions to promote mental health, provision of health services to people with mental illness, and professional skills training to deal with stress and build resilience. Analysis of variance was used to examine preintervention versus postintervention differences in stress, resilience, and work ability. Logistic regression was used to examine absenteeism related to depression. The results suggest that the intervention program was effective at improving participants' ability to work, their sense of control over their jobs, and, in particular, their ability to meet the mental demands of work. The intervention program also reduced participants' job stress levels and reduced the probability of absenteeism related to depression. The intervention programs incorporating both individual-level and organizational-level factors to promote mental health were effective and have implications for both practice and policy regarding enterprises taking more responsibility for the provision of mental health services to their employees.

Analysis of temperature and pressure distribution of containers for nuclear waste material disposal in space

NASA Technical Reports Server (NTRS)

Vanbibber, L. E.; Parker, W. G.

1973-01-01

A computer program was adapted from a previous generation program to analyze the temperature and internal pressure response of a radioactive nuclear waste material disposal container following impact on the earth. This program considers component melting, LiH dissociation, temperature dependent properties and pressure and container stress response. Analyses were performed for 21 cases with variations in radioactive power level, container geometry, degree of deformation of the container, degree of burial and soil properties. Results indicated that the integrity of SS-316 containers could be maintained with partial burials of either underformed or deformed containers. Results indicated that completely buried waste containers, with power levels above 5 kW, experienced creep stress rupture failures in 4 to 12 days.

Effects of stress reduction on carotid atherosclerosis in hypertensive African Americans.

PubMed

Castillo-Richmond, A; Schneider, R H; Alexander, C N; Cook, R; Myers, H; Nidich, S; Haney, C; Rainforth, M; Salerno, J

2000-03-01

African Americans suffer disproportionately higher cardiovascular disease mortality rates than do whites. Psychosocial stress influences the development and progression of atherosclerosis. Carotid intima-media thickness (IMT) is a valid surrogate measure for coronary atherosclerosis, is a predictor of coronary outcomes and stroke, and is associated with psychosocial stress factors. Stress reduction with the Transcendental Meditation (TM) program decreases coronary heart disease risk factors and cardiovascular mortality in African Americans. B-mode ultrasound is useful for the noninvasive evaluation of carotid atherosclerosis. This randomized controlled clinical trial evaluated the effects of the TM program on carotid IMT in hypertensive African American men and women, aged >20 years, over a 6- to 9-month period. From the initially enrolled 138 volunteers, 60 subjects completed pretest and posttest carotid IMT data. The assigned interventions were either the TM program or a health education group. By use of B-mode ultrasound, mean maximum IMT from 6 carotid segments was used to determine pretest and posttest IMT values. Regression analysis and ANCOVA were performed. Age and pretest IMT were found to be predictors of posttest IMT values and were used as covariates. The TM group showed a significant decrease of -0.098 mm (95% CI -0. 198 to 0.003 mm) compared with an increase of 0.054 mm (95% CI -0.05 to 0.158 mm) in the control group (P=0.038, 2-tailed). Stress reduction with the TM program is associated with reduced carotid atherosclerosis compared with health education in hypertensive African Americans. Further research with this stress-reduction technique is warranted to confirm these preliminary findings.

Mediating Role of Psychological Capital in Relationship between Occupational Stress and Turnover Intention among Nurses at Veterans Administration Hospitals in Korea.

PubMed

Yim, Hee-Yun; Seo, Hyun-Ju; Cho, Yoonhyung; Kim, JinHee

2017-03-01

The aim of this study was to evaluate the mediating role of psychological capital (PCP) in the relationship between occupational stress and turnover intention in nurses. Data were collected from a sample of 447 nurses working at four Veterans Administration Hospitals throughout South Korea from July 1 to July 31, 2014. We collected data from the nurses using the following surveys: the Short Form Korean-Occupational Stress Scale, the Korean version of the Turnover Intention Scale, and the Korean version of the Psychological Capital Questionnaire. Multiple linear regression analysis was performed to examine the mediating role of PCP. The level of occupational stress was 1.81 ± 0.23, the level of turnover intention was 3.29 ± 0.86, and the PCP level was 3.95 ± 0.52. There were significant correlations among the three variables (occupational stress, turnover intention, and PCP). PCP played a partial mediating role (β=-0.22, p=.008) in the relationship between occupational stress and turnover intention (p<.001) among nurses working at the Veterans Administration Hospitals. Based on the findings of this study, we recommend that South Korean hospitals offer occupational stress management programs that incorporate relevant programs in efforts to strengthen the overall components of PCP among nurses to reduce turnover intentions. Further studies are required to determine the most effective intervention programs for hospital settings. Copyright © 2017. Published by Elsevier B.V.

Thermoelastic analysis of solar cell arrays and their material properties

NASA Technical Reports Server (NTRS)

Salama, M. A.; Rowe, W. M.; Yasui, R. K.

1973-01-01

A thermoelastic stress analysis procedure is reported for predicting the thermally induced stresses and failures in silicon solar cell arrays. A prerequisite for the analysis is the characterization of the temperature-dependent thermal and mechanical properties of the solar cell materials. Extensive material property testing was carried out in the temperature range -200 to +200 C for the filter glass, P- and N-type silicon, interconnector metals, solder, and several candidate silicone rubber adhesives. The analysis procedure is applied to several solar cell array design configurations. Results of the analysis indicate the optimum design configuration, with respect to compatible materials, effect of the solder coating, and effect of the interconnector geometry. Good agreement was found between results of the analysis and the test program.

Analysis of the Part I Southern Pine In-Grade Program Data

Treesearch

James W. Evans; David E Kretschmann; Cherilyn A. Hatfield; David W. Green

2013-01-01

It has been suggested that within- and between-mill variability of samples may have changed since the original North American In-Grade Program and a new sampling method may be required. The cooperative research “In-Grade Program” was conducted in the late 1970s to the late 1980s to establish allowable properties (modulus of elasticity (MOE), allowable bending stress (...

Relationships Between Stress, Negative Emotions, Resilience, and Smoking: Testing a Moderated Mediation Model.

PubMed

Wang, Yan; Chen, Xinguang; Gong, Jie; Yan, Yaqiong

2016-01-01

More effective tobacco prevention and cessation programs require in-depth understanding of the mechanism by which multiple factors interact with each other to affect smoking behaviors. Stress has long been recognized as a risk factor for smoking. However, the underlying mediation and moderation mechanisms are far from clear. The purpose of this study was to examine the role of negative emotions in mediating the link between stress and smoking and whether this indirect link was modified by resilience. Survey data were collected using audio computer-assisted self-interview (ACASI) from a large random sample of urban residents (n = 1249, mean age = 35.1, 45.3% male) in Wuhan, China. Perceived stress, negative emotions (anxiety, depression), resilience were measured with reliable instruments also validated in China. Self-reported smoking was validated with exhaled carbon monoxide. Mediation analysis indicated that two negative emotions fully mediated the link between stress and intensity of smoking (assessed by number of cigarettes smoked per day, effect =.082 for anxiety and.083 for depression) and nicotine dependence (assessed by DSM-IV standard, effect =.134 for anxiety and.207 for depression). Moderated mediation analysis demonstrated that the mediation effects of negative emotions were negatively associated with resilience. Results suggest resilience interacts with stress and negative emotions to affect the risk of tobacco use and nicotine dependence among Chinese adults. Further research with longitudinal data is needed to verify the findings of this study and to estimate the effect size of resilience in tobacco intervention and cessation programs.

Effect of restoration technique on stress distribution in roots with flared canals: an FEA study.

PubMed

Belli, Sema; Eraslan, Öznur; Eraslan, Oğuz; Eskitaşcıoğlu, Gürcan

2014-04-01

The aim of this finite element analysis (FEA) study was to test the effect of different restorative techniques on stress distribution in roots with flared canals. Five three-dimensional (3D) FEA models that simulated a maxillary incisor with excessive structure loss and flared root canals were created and restored with the following techniques/materials: 1) a prefabricated post: 2) one main and two accessory posts; 3) i-TFC post-core (Sun Medical); 4) the thickness of the root was increased by using composite resin and the root was then restored using a prefabricated post; 5) an anatomic post was created by using composite resin and a prefabricated glass-fiber post. Composite cores and ceramic crowns were created. A 300-N static load was applied at the center of the palatal surface of the tooth to calculate stress distributions. SolidWorks/Cosmosworks structural analysis programs were used for FEA analysis. The analysis of the von Mises and tensile stress values revealed that prefabricated post, accessory post, and i-TFC post systems showed similar stress distributions. They all showed high stress areas at the buccal side of the root (3.67 MPa) and in the cervical region of the root (> 3.67 MPa) as well as low stress accumulation within the post space (0 to 1 MPa). The anatomic post kept the stress within its body and directed less stress towards the remaining tooth structure. The creation of an anatomic post may save the remaining tooth structure in roots with flared canals by reducing the stress levels.

The Stress Check Program: a new national policy for monitoring and screening psychosocial stress in the workplace in Japan.

PubMed

Kawakami, Norito; Tsutsumi, Akizumi

2016-01-01

The Japanese government launched a new occupational health policy called the Stress Check Program. This program mandates that all workplaces with 50 or more employees conduct the Stress Check Program for workers at least once a year. This article gives a brief overview and critical review of the program. We reviewed relevant laws, guidelines, and manuals, as well as the policy development process. The policy and the components of the program were compared using available scientific evidence and trends in the management of psychosocial factors at work according to the policies and guidelines of international bodies and European countries. The process of program policy development was based on a discussion among employer and employee representatives, occupational health professionals, and mental health experts. Scientific evidence shows that mandated components of the program (i.e., feedback of stress survey results and physician's interview) may be ineffective. However, additional components recommended to employers, such as stress management skill provision and work environment improvement, in conjunction with the program may be effective in improving psychosocial stress at work. The Stress Check Program is unique compared with the global trend for psychosocial risk management because it focuses on the assessment of stress among individual workers. The new program may be effective in improving worker mental health by facilitating the psychosocial risk management approach in Japan. Concerns regarding the program include mass leakage of collected information, and possible disadvantages for workers labeled as having high stress.

Parenting Intervention for Prevention of Behavioral Problems in Elementary School-Age Filipino-American Children: A Pilot Study in Churches.

PubMed

Javier, Joyce R; Coffey, Dean M; Schrager, Sheree M; Palinkas, Lawrence A; Miranda, Jeanne

This study aims to test an evidence-based parenting program offered in churches among Filipino-American parents and estimate effect size for a fully powered trial. Twenty-two parents of children aged 6 to 12 years were randomly assigned to either an intervention or a waiting-list control group. Parents' perceptions of child behavior, parenting practices, and parenting stress were obtained at baseline. Parents in the experimental group attended The Incredible Years School Age Program, which consisted of 12 weekly 2-hour sessions. A follow-up assessment was performed after the intervention and 12 weeks later. The intervention was subsequently repeated with the control group. Satisfaction was assessed with a 40-item measure. Analysis of covariance was used to compare the intervention group postintervention versus the control group. Paired t-tests compared mean parenting practices, parenting stress, and child behavior outcomes. Satisfaction was assessed descriptively. Twenty-two parents completed all assessments and the intervention. Analysis of variance comparing intervention and control groups with repeated measures (pre- and post-test measures) revealed that the program has a positive impact on parenting stress, parenting practices (physical punishment, positive verbal discipline), and parent's perception of their child's behavior (internalizing symptoms, externalizing symptoms, and number of problematic behaviors). Analyses of all participants comparing pre- and post intervention revealed improvements in parenting stress, positive verbal discipline, and child externalizing and total problem behaviors. Families reported high satisfaction with the content and format of the intervention. Results support the feasibility of providing an evidence-based parenting program to Filipino parents in churches to prevent future behavioral health problems.

On 3D inelastic analysis methods for hot section components

NASA Technical Reports Server (NTRS)

Mcknight, R. L.; Chen, P. C.; Dame, L. T.; Holt, R. V.; Huang, H.; Hartle, M.; Gellin, S.; Allen, D. H.; Haisler, W. E.

1986-01-01

Accomplishments are described for the 2-year program, to develop advanced 3-D inelastic structural stress analysis methods and solution strategies for more accurate and cost effective analysis of combustors, turbine blades and vanes. The approach was to develop a matrix of formulation elements and constitutive models. Three constitutive models were developed in conjunction with optimized iterating techniques, accelerators, and convergence criteria within a framework of dynamic time incrementing. Three formulations models were developed; an eight-noded mid-surface shell element, a nine-noded mid-surface shell element and a twenty-noded isoparametric solid element. A separate computer program was developed for each combination of constitutive model-formulation model. Each program provides a functional stand alone capability for performing cyclic nonlinear structural analysis. In addition, the analysis capabilities incorporated into each program can be abstracted in subroutine form for incorporation into other codes or to form new combinations.

The 3D inelastic analysis methods for hot section components

NASA Technical Reports Server (NTRS)

Mcknight, R. L.; Maffeo, R. J.; Tipton, M. T.; Weber, G.

1992-01-01

A two-year program to develop advanced 3D inelastic structural stress analysis methods and solution strategies for more accurate and cost effective analysis of combustors, turbine blades, and vanes is described. The approach was to develop a matrix of formulation elements and constitutive models. Three constitutive models were developed in conjunction with optimized iterating techniques, accelerators, and convergence criteria within a framework of dynamic time incrementing. Three formulation models were developed: an eight-noded midsurface shell element; a nine-noded midsurface shell element; and a twenty-noded isoparametric solid element. A separate computer program has been developed for each combination of constitutive model-formulation model. Each program provides a functional stand alone capability for performing cyclic nonlinear structural analysis. In addition, the analysis capabilities incorporated into each program can be abstracted in subroutine form for incorporation into other codes or to form new combinations.

Navy High-Strength Steel Corrosion-Fatigue Modeling Program

DTIC Science & Technology

2006-10-01

interest. In the global analysis, the axial loading and residual stress (via the temperature profile discussed in the previous section) were applied to...developed based on observa- tions from analyses of axial load components with sinusoidally varying surface geometries. These observations indicated that...profile parameters (height and wavelength in each surface direction) and the applied axial loading . Stress Varies Sinusoidally 180° Out of Phase

PAFAC- PLASTIC AND FAILURE ANALYSIS OF COMPOSITES

NASA Technical Reports Server (NTRS)

Bigelow, C. A.

1994-01-01

The increasing number of applications of fiber-reinforced composites in industry demands a detailed understanding of their material properties and behavior. A three-dimensional finite-element computer program called PAFAC (Plastic and Failure Analysis of Composites) has been developed for the elastic-plastic analysis of fiber-reinforced composite materials and structures. The evaluation of stresses and deformations at edges, cut-outs, and joints is essential in understanding the strength and failure for metal-matrix composites since the onset of plastic yielding starts very early in the loading process as compared to the composite's ultimate strength. Such comprehensive analysis can only be achieved by a finite-element program like PAFAC. PAFAC is particularly suited for the analysis of laminated metal-matrix composites. It can model the elastic-plastic behavior of the matrix phase while the fibers remain elastic. Since the PAFAC program uses a three-dimensional element, the program can also model the individual layers of the laminate to account for thickness effects. In PAFAC, the composite is modeled as a continuum reinforced by cylindrical fibers of vanishingly small diameter which occupy a finite volume fraction of the composite. In this way, the essential axial constraint of the phases is retained. Furthermore, the local stress and strain fields are uniform. The PAFAC finite-element solution is obtained using the displacement method. Solution of the nonlinear equilibrium equations is obtained with a Newton-Raphson iteration technique. The elastic-plastic behavior of composites consisting of aligned, continuous elastic filaments and an elastic-plastic matrix is described in terms of the constituent properties, their volume fractions, and mutual constraints between phases indicated by the geometry of the microstructure. The program uses an iterative procedure to determine the overall response of the laminate, then from the overall response determines the stress state in each phase of the composite material. Failure of the fibers or matrix within an element can also be modeled by PAFAC. PAFAC is written in FORTRAN IV for batch execution and has been implemented on a CDC CYBER 170 series computer with a segmented memory requirement of approximately 66K (octal) of 60 bit words. PAFAC was developed in 1982.

Amygdala volume in combat-exposed veterans with and without posttraumatic stress disorder: a cross-sectional study.

PubMed

Kuo, Janice R; Kaloupek, Danny G; Woodward, Steven H

2012-10-01

Data from animal models demonstrate a link between stress exposure and hypertrophic changes in the amygdala; however, studies of adults with posttraumatic stress disorder (PTSD) have failed to find analogous structural alterations. To compare amygdala volumes between a sample of combat veterans with and without PTSD (analysis 1) and examine whether our observation of larger amygdala volume in individuals with PTSD could be accounted for by the presence of trauma exposure in childhood and the severity of combat exposure in adulthood (analysis 2). Cross-sectional magnetic resonance imaging. Veterans Affairs Palo Alto Health Care System Inpatient Trauma Recovery Program and Veterans Affairs New England Health Care System Outpatient PTSD program. Ninety-nine combat-exposed veterans from the Vietnam Conflict or the Persian Gulf War who had been exposed to substantial military operational stress. Amygdala volume adjusted for total cerebral volume, Life Events Checklist, and the Combat Exposure Scale. Analysis 1 indicated that combat-exposed individuals with PTSD exhibited larger total amygdala volume compared with their non-PTSD counterparts (99 individuals, P = .047). Analysis 2 indicated that greater severity of combat exposure (87 individuals, P = .02), as well as the interaction between the presence of early life trauma and the severity of combat exposure (87 individuals, P = .008), were significantly associated with smaller total amygdala volume. The PTSD diagnosis continued to explain larger amygdala volume (87 individuals, P = .006). Posttraumatic stress disorder is associated with enlarged amygdala volume, above the variance accounted for by a history of early life trauma and severity of adult trauma exposure. The discrepancy between our and prior findings may be explained by variability in these trauma indices in previous investigations. These findings support additional study of amygdala structure in human stress disorders and further delineation of the role of early and adult trauma on associated neurologic changes.

Nonlinear analysis for the response and failure of compression-loaded angle-ply laminates with a hole

NASA Technical Reports Server (NTRS)

Mathison, Steven R.; Herakovich, Carl T.; Pindera, Marek-Jerzy; Shuart, Mark J.

1987-01-01

The objective was to determine the effect of nonlinear material behavior on the response and failure of unnotched and notched angle-ply laminates under uniaxial compressive loading. The endochronic theory was chosen as the constitutive theory to model the AS4/3502 graphite-epoxy material system. Three-dimensional finite element analysis incorporating the endochronic theory was used to determine the stresses and strains in the laminates. An incremental/iterative initial strain algorithm was used in the finite element program. To increase computational efficiency, a 180 deg rotational symmetry relationship was utilized and the finite element program was vectorized to run on a supercomputer. Laminate response was compared to experimentation revealing excellent agreement for both the unnotched and notched angle-ply laminates. Predicted stresses in the region of the hole were examined and are presented, comparing linear elastic analysis to the inelastic endochronic theory analysis. A failure analysis of the unnotched and notched laminates was performed using the quadratic tensor polynomial. Predicted fracture loads compared well with experimentation for the unnotched laminates, but were very conservative in comparison with experiments for the notched laminates.

Probabilistic Design and Analysis Framework

NASA Technical Reports Server (NTRS)

Strack, William C.; Nagpal, Vinod K.

2010-01-01

PRODAF is a software package designed to aid analysts and designers in conducting probabilistic analysis of components and systems. PRODAF can integrate multiple analysis programs to ease the tedious process of conducting a complex analysis process that requires the use of multiple software packages. The work uses a commercial finite element analysis (FEA) program with modules from NESSUS to conduct a probabilistic analysis of a hypothetical turbine blade, disk, and shaft model. PRODAF applies the response surface method, at the component level, and extrapolates the component-level responses to the system level. Hypothetical components of a gas turbine engine are first deterministically modeled using FEA. Variations in selected geometrical dimensions and loading conditions are analyzed to determine the effects of the stress state within each component. Geometric variations include the cord length and height for the blade, inner radius, outer radius, and thickness, which are varied for the disk. Probabilistic analysis is carried out using developing software packages like System Uncertainty Analysis (SUA) and PRODAF. PRODAF was used with a commercial deterministic FEA program in conjunction with modules from the probabilistic analysis program, NESTEM, to perturb loads and geometries to provide a reliability and sensitivity analysis. PRODAF simplified the handling of data among the various programs involved, and will work with many commercial and opensource deterministic programs, probabilistic programs, or modules.

Three-dimensional analysis of surface crack-Hertzian stress field interaction

NASA Technical Reports Server (NTRS)

Ballarini, R.; Hsu, Y.

1989-01-01

The results are presented of a stress intensity factor analysis of semicircular surface cracks in the inner raceway of an engine bearing. The loading consists of a moving spherical Hertzian contact load and an axial stress due to rotation and shrink fit. A 3-D linear elastic Boundary Element Method code was developed to perform the stress analysis. The element library includes linear and quadratic isoparametric surface elements. Singular quarter point elements were employed to capture the square root displacement variation and the inverse square root stress singularity along the crack front. The program also possesses the capability to separate the whole domain into two subregions. This procedure enables one to solve nonsymmetric fracture mechanics problems without having to separate the crack surfaces a priori. A wide range of configuration parameters was investigated. The ratio of crack depth to bearing thickness was varied from one-sixtieth to one-fifth for several different locations of the Hertzian load. The stress intensity factors for several crack inclinations were also investigated. The results demonstrate the efficiency and accuracy of the Boundary Element Method. Moreover, the results can provide the basis for crack growth calculations and fatigue life prediction.

Structural performance analysis and redesign

NASA Technical Reports Server (NTRS)

Whetstone, W. D.

1978-01-01

Program performs stress buckling and vibrational analysis of large, linear, finite-element systems in excess of 50,000 degrees of freedom. Cost, execution time, and storage requirements are kept reasonable through use of sparse matrix solution techniques, and other computational and data management procedures designed for problems of very large size.

Shock and Vibration Symposium (59th) Held in Albuquerque, New Mexico on 18-20 October 1988. Volume 4

DTIC Science & Technology

1988-12-01

program to support TOPEX spacecraft design, Statistical energy analysis modeling of nonstructural mass on lightweight equipment panels using VAPEPS...and Stress estimation and statistical energy analysis of the Magellan spacecraft solar array using VAPEPS; Dynamic measurement -- An automated

For operation of the Computer Software Management and Information Center (COSMIC)

NASA Technical Reports Server (NTRS)

Carmon, J. L.

1983-01-01

Computer programs for degaussing, magnetic field calculation, low speed wing flap systems aerodynamics, structural panel analysis, dynamic stress/strain data acquisition, allocation and network scheduling, and digital filters are discussed.

Finite-element computer program for axisymmetric loading situations where components may have a relative interference fit

NASA Technical Reports Server (NTRS)

Taylor, C. M.

1977-01-01

A finite element computer program which enables the analysis of distortions and stresses occurring in compounds having a relative interference is presented. The program is limited to situations in which the loading is axisymmetric. Loads arising from the interference fit(s) and external, inertial, and thermal loadings are accommodated. The components comprise several different homogeneous isotropic materials whose properties may be a function of temperature. An example illustrating the data input and program output is given.

High temperature composite analyzer (HITCAN) user's manual, version 1.0

NASA Technical Reports Server (NTRS)

Lackney, J. J.; Singhal, S. N.; Murthy, P. L. N.; Gotsis, P.

1993-01-01

This manual describes 'how-to-use' the computer code, HITCAN (HIgh Temperature Composite ANalyzer). HITCAN is a general purpose computer program for predicting nonlinear global structural and local stress-strain response of arbitrarily oriented, multilayered high temperature metal matrix composite structures. This code combines composite mechanics and laminate theory with an internal data base for material properties of the constituents (matrix, fiber and interphase). The thermo-mechanical properties of the constituents are considered to be nonlinearly dependent on several parameters including temperature, stress and stress rate. The computation procedure for the analysis of the composite structures uses the finite element method. HITCAN is written in FORTRAN 77 computer language and at present has been configured and executed on the NASA Lewis Research Center CRAY XMP and YMP computers. This manual describes HlTCAN's capabilities and limitations followed by input/execution/output descriptions and example problems. The input is described in detail including (1) geometry modeling, (2) types of finite elements, (3) types of analysis, (4) material data, (5) types of loading, (6) boundary conditions, (7) output control, (8) program options, and (9) data bank.

Computer-Aided Structural Engineering (CASE) Project. CBASIN--Structural Design of Saint Anthony Falls Stilling Basins According to Corps of Engineers Criteria for Hydraulic Structures. Computer Program X0098

DTIC Science & Technology

1989-08-01

was entered as 1 in line four. Its values are entered under the following prompting message: UNIT WGT UNIT WGT LAT SOIL COEF DEPTH WIDTH MOIST...basins, tuese thick- A67 54 1 16 Hsi/2 : \\l 2 7 >- 9 >- 0x HSl/2 L 3 U- HSV /2 ( \\ i ^\\^ (J-HSl)/2 ! ^ I TYPE(A) i 6 N/2 : 1 2...program uses working stress analysis in accordance with Corps of Engineers EM 1110- 1 -2101, "Working Stresses." C METHODS D. EQUIPMENT DETAILS

Effects of a rational-emotive health education intervention on stress management and irrational beliefs among technical college teachers in Southeast Nigeria

PubMed Central

Ugwoke, Samuel C.; Eseadi, Chiedu; Igbokwe, Chima C.; Chiaha, Gertrude T.U.; Nwaubani, Okechukwu O.; Orji, Chibueze Tobias; Ugwuanyi, Leonard T.; Chukwuma, Ifeoma S.; Edikpa, Edith C.; Ogakwu, Vera N.; Onu, Eucharia A.; Agu, Patricia; Nwobi, Ujunwa A.; Omeke, Faith; Okeke, Francisca C.; Ezema, Rita N.; Abugu, Lawretta I.

2017-01-01

Abstract Background: Stress is the product of how an individual reacts and adapts to the specific demands and threats they encounter while carrying out given tasks. The main purpose of this study was to investigate the effects of a rational-emotive health education intervention (REHEI) on stress management, and irrational beliefs in a sample of technical college teachers in Southeast Nigeria. Method: The study design was a pretest–posttest control group. Repeated measures analysis of variance, paired t test and Mann–Whitney U tests were used to analyze the data collected. Results: The REHEI significantly reduced teacher stress in those teaching staff exposed to the treatment intervention, relative to a waitlist control group. Furthermore, the REHEI program significantly decreased irrational beliefs about teaching in those teaching staff exposed to the treatment intervention compared to a waitlist control group. Conclusion: The REHEI program can be used to coach teachers on how to manage and cope with stress and overcome irrational beliefs in teaching. PMID:28767584

The M-Integral for Computing Stress Intensity Factors in Generally Anisotropic Materials

NASA Technical Reports Server (NTRS)

Warzynek, P. A.; Carter, B. J.; Banks-Sills, L.

2005-01-01

The objective of this project is to develop and demonstrate a capability for computing stress intensity factors in generally anisotropic materials. These objectives have been met. The primary deliverable of this project is this report and the information it contains. In addition, we have delivered the source code for a subroutine that will compute stress intensity factors for anisotropic materials encoded in both the C and Python programming languages and made available a version of the FRANC3D program that incorporates this subroutine. Single crystal super alloys are commonly used for components in the hot sections of contemporary jet and rocket engines. Because these components have a uniform atomic lattice orientation throughout, they exhibit anisotropic material behavior. This means that stress intensity solutions developed for isotropic materials are not appropriate for the analysis of crack growth in these materials. Until now, a general numerical technique did not exist for computing stress intensity factors of cracks in anisotropic materials and cubic materials in particular. Such a capability was developed during the project and is described and demonstrated herein.

Leisure education reduces stress among older adults.

PubMed

Chang, Liang-Chih

2014-01-01

The objectives of this study were to examine whether a leisure education program could facilitate leisure competence among older adults and whether it could also reduce their stress. A pre-test-post-test randomized experimental design was conducted. Subjects were randomly assigned to either an experimental group (n = 30) or a control group (n = 30). A leisure education program was used to serve as the intervention. A day before this experiment was carried out, pre-test data were collected using leisure competence and stress scales. Thirty minutes after this experiment ended, post-test data were collected using the same scales. These data were analyzed using an analysis of covariance. The results indicated that the average post-test scores of leisure competence in the experimental group were significantly higher than those in the control group and that the average post-test scores of stress in the experimental group were significantly lower than those in the control group. Healthcare practitioners should adopt the provision of leisure education as a priority to facilitate leisure competence and reduce stress among older adults.

Computer Programs for Settlement Analysis.

DTIC Science & Technology

1980-10-01

sieer ,d if - ... ly and identity by &ock .. mbr ) C(ohesiv’ soils Load tests (Foundations) Computer programs Set t l ement Embanikments Settlement...and stress conditions that are altered by a changing water table and settlement-dependent submergence of the soil. 9. FD31 is a specialized program...are saturated and have submerged unit weights of 50 lb/ft 3 The clay is linearly elastic and the consolidation curve passes through 2 2 the points (e, a

A Study of the Effect of Adhesive and Matrix Stiffnesses on the Axial, Normal, and Shear Stress Distributions of a Boron-epoxy Reinforced Composite Joint. M.S. Thesis

NASA Technical Reports Server (NTRS)

Howell, W. E.

1974-01-01

The mechanical properties of a symmetrical, eight-step, titanium-boron-epoxy joint are discussed. A study of the effect of adhesive and matrix stiffnesses on the axial, normal, and shear stress distributions was made using the finite element method. The NASA Structural Analysis Program (NASTRAN) was used for the analysis. The elastic modulus of the adhesive was varied from 345 MPa to 3100 MPa with the nominal value of 1030 MPa as a standard. The nominal values were used to analyze the stability of the joint. The elastic moduli were varied to determine their effect on the stresses in the joint.

The Boeing plastic analysis capability for engines

NASA Technical Reports Server (NTRS)

Vos, R. G.

1976-01-01

The current BOPACE program is described as a nonlinear stress analysis program, which is based on a family of isoparametric finite elements. The theoretical, user, programmer, preprocessing aspects are discussed, and example problems are included. New features in the current program version include substructuring, an out-of-core Gauss wavefront equation solver, multipoint constraints, combined material and geometric nonlinearities, automatic calculation of inertia effects, provision for distributed as well as concentrated mechanical loads, follower forces, singular crack-tip elements, the SAIL automatic generation capability, and expanded user control over input quantity definition, output selection, and program execution. BOPACE is written in FORTRAN 4 and is currently available for both the IBM 360/370 and the UNIVAC 1108 machines.

[Comparison of boys' and girls' families for actor and partner effect of stress, depression and parent-adolescent communication on middle school students' suicidal ideation: triadic data analysis].

PubMed

Shin, Sung Hee; Ko, Suk Jeong; Yang, Yu Jeong; Oh, Hyun Su; Jang, Mi Young; Choi, Joong Myung

2014-06-01

This study was done to compare families of boys or of girls for actor and partner effect of stress, depression and parent-adolescent communication as perceived by mother, father and adolescent on adolescents' suicidal ideation. Participants were 183 families (104 boys' families, 79 girls' families) who met eligibility criteria. All measures were self-administered. Data were analyzed using SPSS 18.0 and AMOS 18.0 program. In boys' families, boys' depression and communication with father showed actor effect on boys' suicidal ideation. Boys' stress showed indirect effect on boys' suicidal ideation through communication with father and boys' depression. Mothers' depression showed indirect partner effect on boys' suicidal ideation through boys' depression. In families of girls, girls' depression and stress showed actor effects on girls' suicidal ideation. Girls' communication with mother showed indirect effects through girls' depression. Also girls' stress showed indirect effect through girls' depression. Stress in mothers and/or fathers showed partner effect on girls' suicidal ideation. To intervene in adolescents' suicidal ideation and promote adolescents' mental health, programs should be developed differently according to gender and based on parent's psychological states.

Considerations in STS payload environmental verification

NASA Technical Reports Server (NTRS)

Keegan, W. B.

1978-01-01

Considerations regarding the Space Transportation System (STS) payload environmental verification are reviewed. It is noted that emphasis is placed on testing at the subassembly level and that the basic objective of structural dynamic payload verification is to ensure reliability in a cost-effective manner. Structural analyses consist of: (1) stress analysis for critical loading conditions, (2) model analysis for launch and orbital configurations, (3) flight loads analysis, (4) test simulation analysis to verify models, (5) kinematic analysis of deployment/retraction sequences, and (6) structural-thermal-optical program analysis. In addition to these approaches, payload verification programs are being developed in the thermal-vacuum area. These include the exposure to extreme temperatures, temperature cycling, thermal-balance testing and thermal-vacuum testing.

Use of computer programs STLK1 and STWT1 for analysis of stream-aquifer hydraulic interaction

USGS Publications Warehouse

Desimone, Leslie A.; Barlow, Paul M.

1999-01-01

Quantifying the hydraulic interaction of aquifers and streams is important in the analysis of stream base fow, flood-wave effects, and contaminant transport between surface- and ground-water systems. This report describes the use of two computer programs, STLK1 and STWT1, to analyze the hydraulic interaction of streams with confined, leaky, and water-table aquifers during periods of stream-stage fuctuations and uniform, areal recharge. The computer programs are based on analytical solutions to the ground-water-flow equation in stream-aquifer settings and calculate ground-water levels, seepage rates across the stream-aquifer boundary, and bank storage that result from arbitrarily varying stream stage or recharge. Analysis of idealized, hypothetical stream-aquifer systems is used to show how aquifer type, aquifer boundaries, and aquifer and streambank hydraulic properties affect aquifer response to stresses. Published data from alluvial and stratifed-drift aquifers in Kentucky, Massachusetts, and Iowa are used to demonstrate application of the programs to field settings. Analytical models of these three stream-aquifer systems are developed on the basis of available hydrogeologic information. Stream-stage fluctuations and recharge are applied to the systems as hydraulic stresses. The models are calibrated by matching ground-water levels calculated with computer program STLK1 or STWT1 to measured ground-water levels. The analytical models are used to estimate hydraulic properties of the aquifer, aquitard, and streambank; to evaluate hydrologic conditions in the aquifer; and to estimate seepage rates and bank-storage volumes resulting from flood waves and recharge. Analysis of field examples demonstrates the accuracy and limitations of the analytical solutions and programs when applied to actual ground-water systems and the potential uses of the analytical methods as alternatives to numerical modeling for quantifying stream-aquifer interactions.

Stress management and mind-body medicine: a randomized controlled longitudinal evaluation of students' health and effects of a behavioral group intervention at a middle-size German university (SM-MESH).

PubMed

Esch, Tobias; Sonntag, Ulrike; Esch, Sonja Maren; Thees, Stefanie

2013-01-01

Student life can be stressful. Hence, we started a regular mind-body medical stress management program in 2006. By today, more than 500 students took part and evaluations showed significant results, especially with regard to a reduction of stress warning signals. For further analysis, we now decided to run a randomized controlled longitudinal trial. Participating students at Coburg University were randomized into an intervention (n = 24) or a waitlist control group (n = 19). The intervention group completed 3 sets (pre/post/follow-up) and the control group 2 sets (pre/post) of self-administered questionnaires. The questionnaires included: SF-12 Health Survey, Perceived Stress Scale (PSS), Sense of Coherence (SOC-L9), Visual Analogue Scale (VAS) concerning stress, and the Stress Warning Signs (SWS) scale. Randomly selected participants of the intervention group were also queried in qualitative interviews. The intervention consisted of an 8 week stress management group program (mind-body medical stress reduction - MBMSR). Follow-up measures were taken after 6 months. Virtually, no drop-out occurred. Our study showed significant effects in the intervention group concerning SF-12 Mental Component Scale (p = 0.05), SF-12 Physical Component Scale (p = 0.001), VAS (in general, p = 0.001) and SWS (emotional reactions, p <0.001), underlined by qualitative results, which showed a higher quality of life. The effectiveness of an MBMSR program in a group of supposedly healthy students could be demonstrated. Findings suggest that stress management might be given importance at universities that care for the performance, the quality of life, and stress-health status of their students, acknowledging and accounting for the challenging circumstances of university life, as well as the specific needs of the modern student population. Copyright © 2013 S. Karger AG, Basel.

Engineering Analysis of Stresses in Railroad Rails.

DOT National Transportation Integrated Search

1981-10-01

One portion of the Federal Railroad Administration's (FRA) Track Performance Improvement Program is the development of engineering and analytic techniques required for the design and maintenance of railroad track of increased integrity and safety. Un...

Lifetime Stress Cumulatively Programs Brain Transcriptome and Impedes Stroke Recovery: Benefit of Sensory Stimulation

PubMed Central

Zucchi, Fabíola C. R.; Yao, Youli; Ilnytskyy, Yaroslav; Robbins, Jerrah C.; Soltanpour, Nasrin; Kovalchuk, Igor; Kovalchuk, Olga; Metz, Gerlinde A. S.

2014-01-01

Prenatal stress (PS) represents a critical variable affecting lifetime health trajectories, metabolic and vascular functions. Beneficial experiences may attenuate the effects of PS and its programming of health outcomes in later life. Here we investigated in a rat model (1) if PS modulates recovery following cortical ischemia in adulthood; (2) if a second hit by adult stress (AS) exaggerates stress responses and ischemic damage; and (3) if tactile stimulation (TS) attenuates the cumulative effects of PS and AS. Prenatally stressed and non-stressed adult male rats underwent focal ischemic motor cortex lesion and were tested in skilled reaching and skilled walking tasks. Two groups of rats experienced recurrent restraint stress in adulthood and one of these groups also underwent daily TS therapy. Animals that experienced both PS and AS displayed the most severe motor disabilities after lesion. By contrast, TS promoted recovery from ischemic lesion and reduced hypothalamic-pituitary-adrenal axis activity. The data also showed that cumulative effects of adverse and beneficial lifespan experiences interact with disease outcomes and brain plasticity through the modulation of gene expression. Microarray analysis of the lesion motor cortex revealed that cumulative PS and AS interact with genes related to growth factors and transcription factors, which were not affected by PS or lesion alone. TS in PS+AS animals reverted these changes, suggesting a critical role for these factors in activity-dependent motor cortical reorganization after ischemic lesion. These findings suggest that beneficial experience later in life can moderate adverse consequences of early programming to improve cerebrovascular health. PMID:24651125

The Effect of Happiness Training Based on Fordyce Model on Perceived Stress in the Mothers of Children with Cleft Lip and Palate.

PubMed

Hemati, Zeinab; Abbasi, Samira; Paki, Somayeh; Kiani, Davood

2017-06-01

Introduction: A child afflicted with facial deformities such as cleft lip and palate usually affects their parents, because of difficulties in nutrition, speech, aesthetics and social connections, and also imposing a lot of stress on them. The aim of this study was to investigate the effects of a happiness program on the perceived stress in the mothers of children with cleft lip and palate. Methods: This study was a quasi-experimental study in which 64 mothers of children with cleft lip and palate were divided by simple random sampling into intervention and control groups (n=64). The program of happiness training was implemented within 10 sessions and the questionnaires of demographics and Cohen perceived stress were filled out prior to and two months after the last session in intervention group. Data analysis was done using SPSS Ver.13. Results: Independent t-test indicated a significant difference in the perceived stress mean score after training in the intervention and control groups. Also paired t-test indicated a significant difference in perceived stress mean score before and after training in the intervention group, but the difference was not statistically significant for the control group. Conclusion: Considering the effect of happiness program on reducing stress in the mothers of children with cleft lip and palate, it is recommended that this model can be used as an intervention in the maternal care for more involvement in the process of treatment and care of their child, in addition to reduce psychological problems in the parents.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The worldwide semisubmersible drilling rig fleet is approaching retirement. But replacement is not an attractive option even though dayrates are reaching record highs. In 1991, Schlumberger Sedco Forex managers decided that an alternative might exist if regulators and insurers could be convinced to extend rig life expectancy through restoration. Sedco Forex chose their No. 704 semisubmersible, an 18-year North Sea veteran, to test their process. The first step was to determine what required restoration, meaning fatigue life analysis of each weld on the huge vessel. If inspected, the task would be unacceptably time-consuming and of questionable accuracy. Instead a suitemore » of computer programs modeled the stress seen by each weld, statistically estimated the sea states seen by the rig throughout its North Sea service and calibrated a beam-element model on which to run their computer simulations. The elastic stiffness of the structure and detailed stress analysis of each weld was performed with ANSYS, a commercially available finite-element analysis program. The use of computer codes to evaluate service life extension is described.« less

'Learn Young, Learn Fair', a stress management program for fifth and sixth graders: longitudinal results from an experimental study.

PubMed

Kraag, Gerda; Van Breukelen, Gerard J P; Kok, Gerjo; Hosman, Clemens

2009-09-01

This study examined the effects of a universal stress management program (Learn Young, Learn Fair) on stress, coping, anxiety and depression in fifth and sixth grade children. Fifty-two schools (1467 children) participated in a clustered randomized controlled trial. Data was collected in the fall of 2002, the spring of 2003, and the winter of 2004. Given the nested structure of the design mixed (multilevel) regression analyses were applied. Positive effects were found for emotion-focused coping at posttest (p < .01) and increased stress awareness at both time points. At posttest a decrease in problem solving was found (p < .01). After correcting for mediation by stress awareness the results showed that the program significantly reduced stress symptoms (p = .05) and anxiety (p = .01) at posttest. Effect sizes varied from small to large. Universal prevention programs that address stress and coping in children are warranted given the high prevalence of stress in children and the relationship between stress, on the one hand, and health complaints and pathology, on the other. Such programs are expected to be particularly salient for children with an increased sensitivity to stress and inadequate coping styles (e.g., diathesis-stress model). The results indicate that the school-based program 'Learn Young, Learn Fair' may be a valuable program for reducing stress in children.

Multidisciplinary analysis of actively controlled large flexible spacecraft

NASA Technical Reports Server (NTRS)

Cooper, Paul A.; Young, John W.; Sutter, Thomas R.

1986-01-01

The control of Flexible Structures (COFS) program has supported the development of an analysis capability at the Langley Research Center called the Integrated Multidisciplinary Analysis Tool (IMAT) which provides an efficient data storage and transfer capability among commercial computer codes to aid in the dynamic analysis of actively controlled structures. IMAT is a system of computer programs which transfers Computer-Aided-Design (CAD) configurations, structural finite element models, material property and stress information, structural and rigid-body dynamic model information, and linear system matrices for control law formulation among various commercial applications programs through a common database. Although general in its formulation, IMAT was developed specifically to aid in the evaluation of the structures. A description of the IMAT system and results of an application of the system are given.

Organizational Readiness for Change and Opinions toward Treatment Innovations

PubMed Central

Fuller, Bret E.; Rieckmann, Traci; Nunes, Edward V.; Miller, Michael; Arfken, Cynthia; Edmundson, Eldon; McCarty, Dennis

2007-01-01

Program administrators and staff in treatment programs participating in the National Drug Abuse Treatment Clinical Trials Network (CTN) completed surveys to characterize participating programs and practitioners. A two-level random effects regression model assessed the influence of Organizational Readiness for Change (ORC) and organizational attributes on opinions toward the use of four evidence-based practices (manualized treatments, medication, integrated mental health services, and motivational incentives) and practices with less empirical support (confrontation and noncompliance discharge). The ORC Scales suggested greater support for evidence-based practices in programs where staff perceived more program need for improvement, better Internet access, higher levels of peer influence, more opportunities for professional growth, a stronger sense of organizational mission and more organizational stress. Support for confrontation and noncompliance discharge, in contrast, was strong when staff saw less opportunity for professional growth, weaker peer influence, less Internet access, and perceived less organizational stress. The analysis provides evidence of the ORC’s utility in assessing agency strengths and needs during the implementation of evidence-based practices. PMID:17434708

Development of an integrated aeroservoelastic analysis program and correlation with test data

NASA Technical Reports Server (NTRS)

Gupta, K. K.; Brenner, M. J.; Voelker, L. S.

1991-01-01

The details and results are presented of the general-purpose finite element STructural Analysis RoutineS (STARS) to perform a complete linear aeroelastic and aeroservoelastic analysis. The earlier version of the STARS computer program enabled effective finite element modeling as well as static, vibration, buckling, and dynamic response of damped and undamped systems, including those with pre-stressed and spinning structures. Additions to the STARS program include aeroelastic modeling for flutter and divergence solutions, and hybrid control system augmentation for aeroservoelastic analysis. Numerical results of the X-29A aircraft pertaining to vibration, flutter-divergence, and open- and closed-loop aeroservoelastic controls analysis are compared to ground vibration, wind-tunnel, and flight-test results. The open- and closed-loop aeroservoelastic control analyses are based on a hybrid formulation representing the interaction of structural, aerodynamic, and flight-control dynamics.

Integrated Composite Analyzer (ICAN): Users and programmers manual

NASA Technical Reports Server (NTRS)

Murthy, P. L. N.; Chamis, C. C.

1986-01-01

The use of and relevant equations programmed in a computer code designed to carry out a comprehensive linear analysis of multilayered fiber composites is described. The analysis contains the essential features required to effectively design structural components made from fiber composites. The inputs to the code are constituent material properties, factors reflecting the fabrication process, and composite geometry. The code performs micromechanics, macromechanics, and laminate analysis, including the hygrothermal response of fiber composites. The code outputs are the various ply and composite properties, composite structural response, and composite stress analysis results with details on failure. The code is in Fortran IV and can be used efficiently as a package in complex structural analysis programs. The input-output format is described extensively through the use of a sample problem. The program listing is also included. The code manual consists of two parts.

Combined Loads Test Fixture for Thermal-Structural Testing Aerospace Vehicle Panel Concepts

NASA Technical Reports Server (NTRS)

Fields, Roger A.; Richards, W. Lance; DeAngelis, Michael V.

2004-01-01

A structural test requirement of the National Aero-Space Plane (NASP) program has resulted in the design, fabrication, and implementation of a combined loads test fixture. Principal requirements for the fixture are testing a 4- by 4-ft hat-stiffened panel with combined axial (either tension or compression) and shear load at temperatures ranging from room temperature to 915 F, keeping the test panel stresses caused by the mechanical loads uniform, and thermal stresses caused by non-uniform panel temperatures minimized. The panel represents the side fuselage skin of an experimental aerospace vehicle, and was produced for the NASP program. A comprehensive mechanical loads test program using the new test fixture has been conducted on this panel from room temperature to 500 F. Measured data have been compared with finite-element analyses predictions, verifying that uniform load distributions were achieved by the fixture. The overall correlation of test data with analysis is excellent. The panel stress distributions and temperature distributions are very uniform and fulfill program requirements. This report provides details of an analytical and experimental validation of the combined loads test fixture. Because of its simple design, this unique test fixture can accommodate panels from a variety of aerospace vehicle designs.

Relationships between stress, negative emotions, resilience, and smoking: Testing a moderated mediation model

PubMed Central

Wang, Yan; Chen, Xinguang; Gong, Jie; Yan, Yaqiong

2016-01-01

Objective More effective tobacco prevention and cessation programs require in-depth understanding of the mechanism by which multiple factors interact with each other to affect smoking behaviors. Stress has long been recognized as a risk factor for smoking. However, the underlying mediation and moderation mechanisms are far from clear. The purpose of this study was to examine the role of negative emotions in mediating the link between stress and smoking and whether this indirect link was modified by resilience. Methods Survey data were collected using audio computer assisted self-interview (ACASI) from a large random sample of urban residents (n=1249, mean age = 35.1, 45.3% male) in Wuhan, China. Perceived stress, negative emotions (anxiety, depression), resilience were measured with reliable instruments also validated in China. Self-reported smoking was validated with exhaled carbon monoxide. Results Mediation analysis indicated that two negative emotions fully mediated the link between stress and intensity of smoking (assessed by number of cigarettes smoked per day, effect = .082 for anxiety and .083 for depression) and nicotine dependence (assessed by DSM-IV standard, effect = .134 for anxiety and .207 for depression). Moderated mediation analysis demonstrated that the mediation effects of negative emotions were negatively associated with resilience. Conclusions Results suggest resilience interacts with stress and negative emotions to affect the risk of tobacco use and nicotine dependence among Chinese adults. Further research with longitudinal data is needed to verify the findings of this study and to estimate the effect size of resilience in tobacco intervention and cessation programs. PMID:26894428

A rational-emotive stress management intervention for reducing job burnout and dysfunctional distress among special education teachers

PubMed Central

Ugwoke, Samuel C.; Eseadi, Chiedu; Onuigbo, Liziana N.; Aye, Eucharia N.; Akaneme, Immaculata N.; Oboegbulem, Angie I.; Ezenwaji, Ifeyinwa O.; Nwobi, Anthonia U.; Nwaubani, Okechukwu O.; Ezegbe, Bernedeth N.; Ede, Moses O.; Orji, Chibueze T.; Onuoha, Joseph C.; Onu, Eucharia U.; Okeke, Francisca; Agu, Patricia; Omeje, Joachim C.; Omeke, Faith; Ugwu, Romanus; Arumede, Florence; Eneh, Annastasia

2018-01-01

Abstract Background: Job-related burnout and distress are adverse stress responses which affect individuals in their occupational environment. This study aimed at investigating the effect of a rational-emotive stress management program on job burnout and dysfunctional distress among special education teachers in Nigeria. Methods: A pretest–posttest randomized control group design was used. The participants in the study were 54 special education teachers. Data were collected using self-report questionnaires. Participants were allocated to either the treatment group (n = 28 [59.1%]) or the waitlist control group (n = 26 [48.1%]), respectively. A rational-emotive stress management manual was used to deliver the intervention. We statistically analyzed the data collected at three-time points with repeated-measures analysis of variance. Results: At baseline, the job-related burnout symptoms and distress scores of participants were high. However, an intention-to-treat analysis showed that the rational-emotive stress management intervention program was efficacious in reducing the levels of job-related burnout symptoms and dysfunctional distress among participants assigned to the treatment group, compared to a waitlisted group at post-treatment and follow-up meetings. Conclusion: Our study demonstrates the effectiveness of a rational-emotive stress management intervention in reducing the level of job-related burnout and distress in a sample of special education teachers in Nigeria. Occupational health counsellors and other clinicians with sufficient knowledge of rational-emotive behavior therapy framework are urged to employ this approach in assisting other employees in managing job burnout symptoms, and distress. PMID:29703004

A rational-emotive stress management intervention for reducing job burnout and dysfunctional distress among special education teachers: An effect study.

PubMed

Ugwoke, Samuel C; Eseadi, Chiedu; Onuigbo, Liziana N; Aye, Eucharia N; Akaneme, Immaculata N; Oboegbulem, Angie I; Ezenwaji, Ifeyinwa O; Nwobi, Anthonia U; Nwaubani, Okechukwu O; Ezegbe, Bernedeth N; Ede, Moses O; Orji, Chibueze T; Onuoha, Joseph C; Onu, Eucharia A; Okeke, Francisca; Agu, Patricia; Omeje, Joachim C; Omeke, Faith; Ugwu, Romanus; Arumede, Florence; Eneh, Annastasia

2018-04-01

Job-related burnout and distress are adverse stress responses which affect individuals in their occupational environment. This study aimed at investigating the effect of a rational-emotive stress management program on job burnout and dysfunctional distress among special education teachers in Nigeria. A pretest-posttest randomized control group design was used. The participants in the study were 54 special education teachers. Data were collected using self-report questionnaires. Participants were allocated to either the treatment group (n = 28 [59.1%]) or the waitlist control group (n = 26 [48.1%]), respectively. A rational-emotive stress management manual was used to deliver the intervention. We statistically analyzed the data collected at three-time points with repeated-measures analysis of variance. At baseline, the job-related burnout symptoms and distress scores of participants were high. However, an intention-to-treat analysis showed that the rational-emotive stress management intervention program was efficacious in reducing the levels of job-related burnout symptoms and dysfunctional distress among participants assigned to the treatment group, compared to a waitlisted group at post-treatment and follow-up meetings. Our study demonstrates the effectiveness of a rational-emotive stress management intervention in reducing the level of job-related burnout and distress in a sample of special education teachers in Nigeria. Occupational health counsellors and other clinicians with sufficient knowledge of rational-emotive behavior therapy framework are urged to employ this approach in assisting other employees in managing job burnout symptoms, and distress.

Application of dynamic programming to evaluate the slope stability of a vertical extension to a balefill.

PubMed

Kremen, Arie; Tsompanakis, Yiannis

2010-04-01

The slope-stability of a proposed vertical extension of a balefill was investigated in the present study, in an attempt to determine a geotechnically conservative design, compliant with New Jersey Department of Environmental Protection regulations, to maximize the utilization of unclaimed disposal capacity. Conventional geotechnical analytical methods are generally limited to well-defined failure modes, which may not occur in landfills or balefills due to the presence of preferential slip surfaces. In addition, these models assume an a priori stress distribution to solve essentially indeterminate problems. In this work, a different approach has been applied, which avoids several of the drawbacks of conventional methods. Specifically, the analysis was performed in a two-stage process: (a) calculation of stress distribution, and (b) application of an optimization technique to identify the most probable failure surface. The stress analysis was performed using a finite element formulation and the location of the failure surface was located by dynamic programming optimization method. A sensitivity analysis was performed to evaluate the effect of the various waste strength parameters of the underlying mathematical model on the results, namely the factor of safety of the landfill. Although this study focuses on the stability investigation of an expanded balefill, the methodology presented can easily be applied to general geotechnical investigations.

Color It Real: A Program to Increase Condom Use and Reduce Substance Abuse and Perceived Stress.

PubMed

Zellner, Tiffany; Trotter, Jennie; Lenoir, Shelia; Walston, Kelvin; Men-Na'a, L'dia; Henry-Akintobi, Tabia; Miller, Assia

2015-12-22

Few interventions have targeted perceived stress as a co-occurring construct central to substance use and subsequent HIV/AIDS risk reduction among African American urban young adults. The Color It Real Program was a seven session, weekly administered age-specific and culturally-tailored intervention designed to provide substance abuse and HIV education and reduce perceived stress among African Americans ages 18 to 24 in Atlanta, GA. Effectiveness was assessed through a quasi-experimental study design that consisted of intervention (n = 122) and comparison (n = 70) groups completing a pre- and post-intervention survey. A series of Analysis of Variance (ANOVA) tests were used to assess pre- to post-intervention changes between study groups. For intervention participants, perceived stress levels were significantly reduced by the end of the intervention (t(70) = 2.38, p = 0.020), condom use at last sexual encounter significantly increased (F = 4.43, p = 0.0360), intervention participants were significantly less likely to drink five or more alcoholic drinks in one sitting (F = 5.10, p = 0.0245), and to use clean needles when injecting the drug (F = 36.99, p = 0.0001). This study is among the first of its kind to incorporate stress management as an integral approach to HIV/SA prevention. The program has implications for the design of other community-based, holistic approaches to addressing substance use and risky behaviors for young adults.

Population Structure, Genetic Diversity and Molecular Marker-Trait Association Analysis for High Temperature Stress Tolerance in Rice

PubMed Central

Barik, Saumya Ranjan; Sahoo, Ambika; Mohapatra, Sudipti; Nayak, Deepak Kumar; Mahender, Anumalla; Meher, Jitandriya; Anandan, Annamalai

2016-01-01

Rice exhibits enormous genetic diversity, population structure and molecular marker-traits associated with abiotic stress tolerance to high temperature stress. A set of breeding lines and landraces representing 240 germplasm lines were studied. Based on spikelet fertility percent under high temperature, tolerant genotypes were broadly classified into four classes. Genetic diversity indicated a moderate level of genetic base of the population for the trait studied. Wright’s F statistic estimates showed a deviation of Hardy-Weinberg expectation in the population. The analysis of molecular variance revealed 25 percent variation between population, 61 percent among individuals and 14 percent within individuals in the set. The STRUCTURE analysis categorized the entire population into three sub-populations and suggested that most of the landraces in each sub-population had a common primary ancestor with few admix individuals. The composition of materials in the panel showed the presence of many QTLs representing the entire genome for the expression of tolerance. The strongly associated marker RM547 tagged with spikelet fertility under stress and the markers like RM228, RM205, RM247, RM242, INDEL3 and RM314 indirectly controlling the high temperature stress tolerance were detected through both mixed linear model and general linear model TASSEL analysis. These markers can be deployed as a resource for marker-assisted breeding program of high temperature stress tolerance. PMID:27494320

Population Structure, Genetic Diversity and Molecular Marker-Trait Association Analysis for High Temperature Stress Tolerance in Rice.

PubMed

Pradhan, Sharat Kumar; Barik, Saumya Ranjan; Sahoo, Ambika; Mohapatra, Sudipti; Nayak, Deepak Kumar; Mahender, Anumalla; Meher, Jitandriya; Anandan, Annamalai; Pandit, Elssa

2016-01-01

Rice exhibits enormous genetic diversity, population structure and molecular marker-traits associated with abiotic stress tolerance to high temperature stress. A set of breeding lines and landraces representing 240 germplasm lines were studied. Based on spikelet fertility percent under high temperature, tolerant genotypes were broadly classified into four classes. Genetic diversity indicated a moderate level of genetic base of the population for the trait studied. Wright's F statistic estimates showed a deviation of Hardy-Weinberg expectation in the population. The analysis of molecular variance revealed 25 percent variation between population, 61 percent among individuals and 14 percent within individuals in the set. The STRUCTURE analysis categorized the entire population into three sub-populations and suggested that most of the landraces in each sub-population had a common primary ancestor with few admix individuals. The composition of materials in the panel showed the presence of many QTLs representing the entire genome for the expression of tolerance. The strongly associated marker RM547 tagged with spikelet fertility under stress and the markers like RM228, RM205, RM247, RM242, INDEL3 and RM314 indirectly controlling the high temperature stress tolerance were detected through both mixed linear model and general linear model TASSEL analysis. These markers can be deployed as a resource for marker-assisted breeding program of high temperature stress tolerance.

Design of impact-resistant boron/aluminum large fan blade

NASA Technical Reports Server (NTRS)

Salemme, C. T.; Yokel, S. A.

1978-01-01

The technical program was comprised of two technical tasks. Task 1 encompassed the preliminary boron/aluminum fan blade design effort. Two preliminary designs were evolved. An initial design consisted of 32 blades per stage and was based on material properties extracted from manufactured blades. A final design of 36 blades per stage was based on rule-of-mixture material properties. In Task 2, the selected preliminary blade design was refined via more sophisticated analytical tools. Detailed finite element stress analysis and aero performance analysis were carried out to determine blade material frequencies and directional stresses.

Perceived stress and gastrointestinal symptoms in nursing students in Korea: A cross-sectional survey

PubMed Central

2011-01-01

Background Although nursing students experience a high level of stress during their training, there has been limited research on stress and its impact on the student's physical responses, such as gastrointestinal symptoms. The aims of this study are to assess the prevalence of GI symptoms in nursing students in Korea and to examine the association between the perceived stress and GI symptoms. Methods A cross-sectional descriptive study design was used. A total of 715 students of a three-year associate degree nursing program in a Korean college participated. The Perceived Stress Scale and a GI Symptoms Questionnaire were administered through a self-reported system. Chi-square tests, Fisher's exact test, and logistic regression analysis were performed using SPSS 17.0. Results Sixty-five percent of the nursing students experienced more than one GI symptom, with 31.1% of students reporting more than three GI symptoms. Most of the nursing students complained of upper dysmotility and bowel symptoms. In addition, students who reported higher perceived stress were significantly more likely to complain of GI symptoms. Compared to nursing students with the lowest perceived stress level, the adjusted odds ratio (OR) for GI symptoms in students with the highest perceived stress level was 3.52 times higher (95% CI = 2.05-6.06). Conclusions GI symptoms that are highly prevalent among nursing students are significantly associated with the perceived stress level. High perceived stress should be considered a risk factor for GI symptoms. To reduce perceived stress, stress management programs including cognitive reappraisal training are needed in nursing curriculum. PMID:22067441

Prevalence, Risk Factors, and Outcomes of Financial Stress in Survivors of Critical Illness.

PubMed

Khandelwal, Nita; Hough, Catherine L; Downey, Lois; Engelberg, Ruth A; Carson, Shannon S; White, Douglas B; Kahn, Jeremy M; Jones, Derek M; Key, Mary D; Reagan, Wen; Porter, Laura S; Curtis, J Randall; Cox, Christopher E

2018-06-01

Little is known about the experience of financial stress for patients who survive critical illness or their families. Our objective was to describe the prevalence of financial stress among critically ill patients and their families, identify clinical and demographic characteristics associated with this stress, and explore associations between financial stress and psychologic distress. Secondary analysis of a randomized trial comparing a coping skills training program and an education program for patients surviving acute respiratory failure and their families. Five geographically diverse hospitals. Patients (n = 175) and their family members (n = 85) completed surveys within 2 weeks of arrival home and 3 and 6 months after randomization. We used regression analyses to assess associations between patient and family characteristics at baseline and financial stress at 3 and 6 months. We used path models and mediation analyses to explore relationships between financial stress, symptoms of anxiety and depression, and global mental health. Serious financial stress was high at both time points and was highest at 6 months (42.5%) among patients and at 3 months (48.5%) among family members. Factors associated with financial stress included female sex, young children at home, and baseline financial discomfort. Experiencing financial stress had direct effects on symptoms of anxiety (β = 0.260; p < 0.001) and depression (β = 0.048; p = 0.048). Financial stress after critical illness is common and associated with symptoms of anxiety and depression. Our findings provide direction for potential interventions to reduce this stress and improve psychologic outcomes for patients and their families.

Structural Analysis of Kufasat Using Ansys Program

NASA Astrophysics Data System (ADS)

Al-Maliky, Firas T.; AlBermani, Mohamed J.

2018-03-01

The current work focuses on vibration and modal analysis of KufaSat structure using ANSYS 16 program. Three types of Aluminum alloys (5052-H32, 6061-T6 and 7075-T6) were selected for investigation of the structure under design loads. Finite element analysis (FEA) in design static load of 51 g was performed. The natural frequencies for five modes were estimated using modal analysis. In order to ensure that KufaSat could withstand with various conditions during launch, the Margin of safety was calculated. The results of deformation and Von Mises stress for linear buckling analysis were also performed. The comparison of data was done to select the optimum material for KufaSat structures.

Finite element stress, vibration, and buckling analysis of laminated beams with the use of refined elements

NASA Astrophysics Data System (ADS)

Borovkov, Alexei I.; Avdeev, Ilya V.; Artemyev, A.

1999-05-01

In present work, the stress, vibration and buckling finite element analysis of laminated beams is performed. Review of the equivalent single-layer (ESL) laminate theories is done. Finite element algorithms and procedures integrated into the original FEA program system and based on the classical laminated plate theory (CLPT), first-order shear deformation theory (FSDT), third-order theory of Reddy (TSDT-R) and third- order theory of Kant (TSDT-K) with the use of the Lanczos method for solving of the eigenproblem are developed. Several numerical tests and examples of bending, free vibration and buckling of multilayered and sandwich beams with various material, geometry properties and boundary conditions are solved. New effective higher-order hierarchical element for the accurate calculation of transverse shear stress is proposed. The comparative analysis of results obtained by the considered models and solutions of 2D problems of the heterogeneous anisotropic elasticity is fulfilled.

SSME structural computer program development. Volume 3: BOPACE demonstration analysis of the SSME thrust chamber liner

NASA Technical Reports Server (NTRS)

Spring, A. H.

1973-01-01

The application of a structural computer program for analysis of a thrust chamber liner is discussed. Two objectives were accomplished as follows: (1) exercise of the full capabilities of the computer program and (2) definition of thermal and mechanical boundary conditions to reflect the emergency power level operating conditions for the SSME 47OK engine at a station just upstream of the thrust chamber throat. Creep information on the thrust chamber is presented as a reference curve of creep strain versus time for various temperatures. Contour plots of the effective plastic strain, effective stress, and effective creep strain are developed.

Reliability Practice at NASA Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Pruessner, Paula S.; Li, Ming

2008-01-01

This paper describes in brief the Reliability and Maintainability (R&M) Programs performed directly by the reliability branch at Goddard Space Flight Center (GSFC). The mission assurance requirements flow down is explained. GSFC practices for PRA, reliability prediction/fault tree analysis/reliability block diagram, FMEA, part stress and derating analysis, worst case analysis, trend analysis, limit life items are presented. Lessons learned are summarized and recommendations on improvement are identified.

“The program affects me ‘cause it gives away stress”: Urban Students’ Qualitative Perspectives on Stress and a School-Based Mindful Yoga Intervention

PubMed Central

Dariotis, Jacinda K.; Cluxton-Keller, Fallon; Mirabal-Beltran, Roxanne; Gould, Laura Feagans; Greenberg, Mark T.; Mendelson, Tamar

2016-01-01

School-based mindfulness and yoga studies generally measure stress-related outcomes using quantitative measures. This study answers the following research questions: how do youth define stress and in what ways, if any, was a mindful yoga intervention helpful to youth during experiences of stress. To explore youths’ own perspectives on stress, stressors in youths’ lives, and perceived changes in responses to stress post-intervention, we conducted focus group discussions with 22 middle school students from low-income urban communities following a 16-week mindful yoga intervention. Using thematic analysis, three themes emerged: (1) youth conflated stress with negative emotions; (2) peer and family conflicts were common stressors; and (3) youth reported improved impulse control and emotional regulation following the intervention. Study findings have implications for refining intervention content (e.g., discussions of stress), as well as informing the selection and development of quantitative measures for future research on stress and stress responses in urban youth. PMID:27688017

Stress management in dental students: a systematic review

PubMed Central

Alzahem, Abdullah M; Van der Molen, Henk T; Alaujan, Arwa H; De Boer, Benjamin J

2014-01-01

This study compared the effectiveness of stress management programs in dental education by systematic review of the literature. The number of studies concerning stress management programs for dental students is limited compared with studies discussing sources of stress. Several types of programs for stress management have been reported, and differ in their duration, content, and outcomes. Two main strategies have been used to help stressed students, ie, decreasing the number of stressors and increasing the ability to cope with stress. The first strategy includes several components, such as reducing fear of failure and workload pressure due to examinations and requirements. The second strategy includes coping techniques, such as deep breathing exercises. Although positive effects have been reported for most of the programs, these have mainly been evaluated using subjective self-report measures. There is a need for more research to identify the most effective stress management program. PMID:24904226

The How, What and Why of Stress Management Training.

ERIC Educational Resources Information Center

Matteson, Michael T.; Ivancevich, John M.

1982-01-01

The authors state that employers need to adopt a preventive orientation with respect to stress management and stress training. They examine the costs of stress, the stressed employee, the structure of a stress management program, training objectives, skill acquisition, sources of stress, learning new skills, feedback, and program evaluation. (CT)

NASA automatic system for computer program documentation, volume 2

NASA Technical Reports Server (NTRS)

Simmons, D. B.

1972-01-01

The DYNASOR 2 program is used for the dynamic nonlinear analysis of shells of revolution. The equations of motion of the shell are solved using Houbolt's numerical procedure. The displacements and stress resultants are determined for both symmetrical and asymmetrical loading conditions. Asymmetrical dynamic buckling can be investigated. Solutions can be obtained for highly nonlinear problems utilizing as many as five of the harmonics generated by SAMMSOR program. A restart capability allows the user to restart the program at a specified time. For Vol. 1, see N73-22129.

Stress distribution of oval and circular fiber posts in amandibular premolar: a three-dimensional finite element analysis

PubMed Central

Kilic, Kerem; Esim, Emir; Aslan, Tugrul; Kilinc, Halil Ibrahim; Yildirim, Sahin

2013-01-01

PURPOSE The aim of the present study was to evaluate the effects of posts with different morphologies on stress distribution in an endodontically treated mandibular premolar by using finite element models (FEMs). MATERIALS AND METHODS A mandibular premolar was modeled using the ANSYS software program. Two models were created to represent circular and oval fiber posts in this tooth model. An oblique force of 300 N was applied at an angle of 45° to the occlusal plane and oriented toward the buccal side. von Mises stress was measured in three regions each for oval and circular fiber posts. RESULTS FEM analysis showed that the von Mises stress of the circular fiber post (426.81 MPa) was greater than that of the oval fiber post (346.34 MPa). The maximum distribution of von Mises stress was in the luting agent in both groups. Additionally, von Mises stresses accumulated in the coronal third of root dentin, close to the post space in both groups. CONCLUSION Oval fiber posts are preferable to circular fiber posts in oval-shaped canals given the stress distribution at the post-dentin interface. PMID:24353882

A manual-based group program to improve mental health: what kind of teachers are interested and who stands to benefit from this program?

PubMed

Unterbrink, Thomas; Pfeifer, Ruth; Krippeit, Lorena; Zimmermann, Linda; Rose, Uwe; Joos, Andreas; Hartmann, Armin; Wirsching, Michael; Bauer, Joachim

2014-01-01

In order to evaluate a manual-based group program for teachers aiming at strengthening mental health, we examined (1) whether the teachers interested in participating differ from their colleagues without interest and (2) whether there is evidence of subgroups benefiting more than others among those who participated. Out of a basic sample of 949 schoolteachers, 337 teachers declared interest in a group program. All teachers were surveyed with the "General Health Questionnaire", the "Maslach Burnout Inventory" and the "Effort Reward Imbalance Questionnaire". In addition, participating teachers were screened with the "Symptom Checklist 27" T and χ(2)-tests were calculated to detect differences between those interested in the program and the remaining 612 teachers. Six factors were established and used for a regression analysis that identified specific parameters more or less correlating with health benefits of those who participated in the program. Findings showed that those declaring interest in the intervention displayed a higher degree of occupational stress according to all health parameters examined. Teachers interested in the program were significantly younger, more frequently female and single. The regression analysis showed that the baseline scores of the six health parameters were the strongest predictors for improvement. Worse scores before the beginning of the intervention correlated with a more positive effect. Intervention programs aiming at alleviating the mental stress of teachers find the interest of those who need it most. More importantly, the latter are the ones who--at least if our program is applied-benefit best.

Structural Analysis of Components of the Students for the Exploration and Development of Space Satellite (SEDSAT) for the Small Expendable Deployer System (SEDS) Project Office

NASA Technical Reports Server (NTRS)

Maddux, Gary A.

1998-01-01

During the time frame allocated by the delivery order, members of the UAH Applied Research Program, with the cooperation of representatives from NASA investigated and conducted stress analysis of the SEDSAT1 satellite. The main area of concern was with the design of the deployable 10 m antennas. The placement of the holes for the antenna door hinge pin was too close to the edge of the antenna canister. Because of the load placed on the hinge pin, the stress analysis of this area suggested that more space would be needed between the holes and the edge of the material. Due to other conflicts, SEDSATI was removed from flying on the space shuttle and moved to the Delta Launch Vehicle. This changed many of the design requirements for the mounting and deployment of the satellite that forced a new design for the satellite. Once this happened, the stress analysis became obsolete, and the task was concluded.

Development of a gene expression database and related analysis programs for evaluation of anticancer compounds.

PubMed

Ushijima, Masaru; Mashima, Tetsuo; Tomida, Akihiro; Dan, Shingo; Saito, Sakae; Furuno, Aki; Tsukahara, Satomi; Seimiya, Hiroyuki; Yamori, Takao; Matsuura, Masaaki

2013-03-01

Genome-wide transcriptional expression analysis is a powerful strategy for characterizing the biological activity of anticancer compounds. It is often instructive to identify gene sets involved in the activity of a given drug compound for comparison with different compounds. Currently, however, there is no comprehensive gene expression database and related application system that is; (i) specialized in anticancer agents; (ii) easy to use; and (iii) open to the public. To develop a public gene expression database of antitumor agents, we first examined gene expression profiles in human cancer cells after exposure to 35 compounds including 25 clinically used anticancer agents. Gene signatures were extracted that were classified as upregulated or downregulated after exposure to the drug. Hierarchical clustering showed that drugs with similar mechanisms of action, such as genotoxic drugs, were clustered. Connectivity map analysis further revealed that our gene signature data reflected modes of action of the respective agents. Together with the database, we developed analysis programs that calculate scores for ranking changes in gene expression and for searching statistically significant pathways from the Kyoto Encyclopedia of Genes and Genomes database in order to analyze the datasets more easily. Our database and the analysis programs are available online at our website (http://scads.jfcr.or.jp/db/cs/). Using these systems, we successfully showed that proteasome inhibitors are selectively classified as endoplasmic reticulum stress inducers and induce atypical endoplasmic reticulum stress. Thus, our public access database and related analysis programs constitute a set of efficient tools to evaluate the mode of action of novel compounds and identify promising anticancer lead compounds. © 2012 Japanese Cancer Association.

Stress concentration factors for circular, reinforced penetrations in pressurized cylindrical shells. Ph.D. Thesis - Virginia Univ.

NASA Technical Reports Server (NTRS)

Ramsey, J. W., Jr.

1975-01-01

The effect on stresses in a cylindrical shell with a circular penetration subject to internal pressure was investigated in thin, shallow linearly, elastic cylindrical shells. Results provide numerical predictions of peak stress concentration factors around nonreinforced and reinforced penetrations in pressurized cylindrical shells. Analytical results were correlated with published formulas, as well as theoretical and experimental results. An accuracy study was made of the finite element program for each of the configurations considered important in pressure vessel technology. A formula is developed to predict the peak stress concentration factor for analysis and/or design in conjunction with the ASME Boiler and Pressure Vessel Code.

[Three-dimensional finite element stress distribution and displacement analysis of alveolar ridge retained by conical telescope].

PubMed

Lin, Ying-he; Man, Yi; Liang, Xing; Qu, Yi-li; Lu, Xuan

2004-11-01

To study the stress distribution and displacement of edentulous alveolar ridge of removable partial denture which is retained by using conical telescope. An ideal three dimensional finite element model was constructed by using SCT image reconstruction technique, self-programming and ANSYS software. The static load was applied. The stress and displacement characteristics of these different types of materials which form the metal part of the conical telescope were compared and analyzed. Generally, the four materials produced almost the same stress and displacement at the site of the edentulous alveolar ridge. From the viewpoint of dynamics, the application of different materials in making the metal part of conical telescope is feasible.

The effect of a psychological empowerment program based on psychodrama on empowerment perception and burnout levels in oncology nurses: Psychological empowerment in oncology nurses.

PubMed

Özbaş, Azize Atli; Tel, Havva

2016-08-01

Oncology nursing is stressful by its nature, and nurses in the field experience a high amount of stress and burnout. In order to cope with occupational stress, nurses need to employ flexible adjustment mechanisms that allow them the power to process their experiences. Failure of efficient stress management causes burnout, and burnout is closely related to powerlessness. It is therefore believed that the occurrence of burnout can be reduced by means of psychological empowerment of nurses. Our study was conducted to determine the effect of a "psychodrama-based psychological empowerment program" on (1) the perception of empowerment and (2) the levels of burnout in oncology nurses. The sample was made up of 82 oncology nurses (38 nurses in the study group and 44 in the control/comparison group). Study data were collected using the Psychological Empowerment Scale, the Nurse Work Empowerment Scale, and Maslach's Burnout Inventory. The study group attended a "psychodrama-based psychological empowerment program" (2 hours, 1 day a week, for 10 weeks). For data assessment, we employed an independent t test and one-way analysis of variance. The psychological empowerment and workplace empowerment scores of nurses in the study group increased and their burnout scores decreased following attendance in the psychodrama-based psychological empowerment program. We found that the psychodrama-based psychological empowerment program increased psychological empowerment and enhanced perception of workplace empowerment while decreasing levels of burnout in oncology nurses. The program is recommended and should allow oncology nurses to benefit from their personal experiences and thus increase self-empowerment, to enhance their perception of empowerment, and to prevent burnout.

Stress in the City: Influence of Urban Social Stress and Violence on Pregnancy and Postpartum Quality of Life among Adolescent and Young Mothers.

PubMed

Willie, Tiara C; Powell, Adeya; Kershaw, Trace

2016-02-01

Adolescent and young mothers transitioning from pregnancy to postpartum need to maintain an optimal quality of life. Stress and exposure to violence (e.g., intimate partner violence (IPV), nonpartner violence) are predictors of poor quality of life for adult women; however, these associations remain understudied among adolescent and young mothers in urban areas. Guided by the social ecological model, the current study created a latent variable, urban social stress, to examine the impact of the urban social environment (i.e., stressful life events, discrimination, family stress, and neighborhood problems) on the quality of life of adolescent and young mothers during both pregnancy and postpartum. The current study is a secondary data analysis of a prospective cohort study of 296 expectant young mothers recruited at obstetrics and gynecology clinics. Results from structural equation and multigroup models found that higher urban social stress predicted lower mental and physical quality of life during pregnancy, but these associations were significantly stronger for IPV-exposed and nonpartner violence-exposed mothers. In the postpartum period, higher urban social stress predicted lower mental and physical quality of life, but these associations were significantly stronger for IPV-unexposed and nonpartner violence-exposed mothers. Stress reduction programs need to help adolescent and young mothers in urban areas develop stress management skills specific to urban social stress. Pregnancy and parenting programs need to be tailored to the specific needs of young mothers in urban areas by becoming sensitive to the role of IPV and nonpartner violence in these young women's lives.

Thermal Analysis

NASA Technical Reports Server (NTRS)

1986-01-01

The University of Georgia used NASTRAN, a COSMIC program that predicts how a design will stand up under stress, to develop a model for monitoring the transient cooling of vegetables. The winter use of passive solar heating for poultry houses is also under investigation by the Agricultural Engineering Dept. Another study involved thermal analysis of black and green nursery containers. The use of NASTRAN has encouraged student appreciation of sophisticated computer analysis.

Mind magic: a pilot study of preventive mind-body-based stress reduction in behaviorally inhibited and activated children.

PubMed

Jellesma, Francine C; Cornelis, Janine

2012-03-01

The aim of this pilot study was to examine a mind-body-based preventive intervention program and to determine relationships between children's behavioral inhibition system (BIS) and behavioral activation system, stress, and stress reduction after the program. Children participated in the program (n=30) or in a control condition (n=24). They filled out questionnaires before and after the program and reported their levels of stress before and after each of the five sessions. The program consisted of weekly sessions. Each session incorporated yoga postures, visualization, and social exercises. Breathing techniques were integrated. Stress reductions were only seen in the intervention group and mainly in children with high BIS--irrespective of their behavioral activation system. The results demonstrate that children with high BIS may benefit from a mind-body-based stress reduction program.

A Perceptional Analysis of the South Carolina Principal Induction Program as Perceived by Program Participants

ERIC Educational Resources Information Center

Hudson, Jerome A.

2009-01-01

School districts are grappling with the problem of an alarming number of certified principals who are choosing not to enter the principalship. In many cases those who do enter are exiting only after a few years of service. Principals cite the long hours, low pay, and the stress of accountability as major reasons they are leaving the profession.…

Computing Reliabilities Of Ceramic Components Subject To Fracture

NASA Technical Reports Server (NTRS)

Nemeth, N. N.; Gyekenyesi, J. P.; Manderscheid, J. M.

1992-01-01

CARES calculates fast-fracture reliability or failure probability of macroscopically isotropic ceramic components. Program uses results from commercial structural-analysis program (MSC/NASTRAN or ANSYS) to evaluate reliability of component in presence of inherent surface- and/or volume-type flaws. Computes measure of reliability by use of finite-element mathematical model applicable to multiple materials in sense model made function of statistical characterizations of many ceramic materials. Reliability analysis uses element stress, temperature, area, and volume outputs, obtained from two-dimensional shell and three-dimensional solid isoparametric or axisymmetric finite elements. Written in FORTRAN 77.

[Cost-benefit analysis of primary prevention programs for mental health at the workplace in Japan].

PubMed

Yoshimura, Kensuke; Kawakami, Norito; Tsusumi, Akizumi; Inoue, Akiomi; Kobayashi, Yuka; Takeuchi, Ayano; Fukuda, Takashi

2013-01-01

To determine the cost-benefits of primary prevention programs for mental health at the workplace, we conducted a meta-analysis of published studies in Japan. We searched the literature, published as of 16 November 2011, using the Pubmed database and relevant key words. The inclusion criteria were: conducted in the workplace in Japan; primary prevention focus; quasi-experimental studies or controlled trials; and outcomes including absenteeism or presenteeism. Four studies were identified: one participatory work environment improvement, one individual-oriented stress management, and two supervisor education programs. Costs and benefits in yen were estimated for each program, based on the description of the programs in the literature, and additional information from the authors. The benefits were estimated based on each program's effect on work performance (measured using the WHO Health and Work Performance Questionnaire in all studies), as well as sick leave days, if available. The estimated relative increase in work performance (%) in the intervention group compared to the control group was converted into labor cost using the average bonus (18% of the total annual salary) awarded to employees in Japan as a base. Sensitive analyses were conducted using different models of time-trend of intervention effects and 95% confidence limits of the relative increase in work performance. For the participatory work environment improvement program, the cost was estimated as 7,660 yen per employee, and the benefit was 15,200-22,800 yen per employee. For the individual-oriented stress management program, the cost was 9,708 yen per employee, and the benefit was 15,200-22,920 yen per employee. For supervisor education programs, the costs and benefits were respectively 5,209 and 4,400-6,600 yen per employee, in one study, 2,949 and zero yen per employee in the other study. The 95% confidence intervals were wide for all these studies. For the point estimates based on these cases, the participatory work environment improvement program and the individual-oriented stress management program showed better cost-benefits. For the supervisor education programs, the costs were almost equal to or greater than the benefits. The results of the present study suggest these primary prevention programs for mental health at the workplace are economically advantageous to employers. Because the 95% confidence intervals were wide, further research is needed to clarify if these interventions yield statistically significant cost-benefits.

Earth Observatory Satellite system definition study. Report 4: Low cost management approach and recommendations

NASA Technical Reports Server (NTRS)

1974-01-01

An analysis of low cost management approaches for the development of the Earth Observatory Satellite (EOS) is presented. The factors of the program which tend to increase costs are identified. The NASA/Industry interface is stressed to show how the interface can be improved to produce reduced program costs. Techniques and examples of cost reduction which can be applied to the EOS program are tabulated. Specific recommendations for actions to be taken to reduce costs in prescribed areas are submitted.

Blended Infant Massage-Parenting Enhancement Program on Recovering Substance-Abusing Mothers' Parenting Stress, Self-Esteem, Depression, Maternal Attachment, and Mother-Infant Interaction.

PubMed

Porter, Luz S; Porter, Brian O; McCoy, Virginia; Bango-Sanchez, Vivian; Kissel, Bonnie; Williams, Marjorie; Nunnewar, Sachin

2015-12-01

This study aimed to determine whether a blended Infant Massage-Parenting Enhancement Program (IMPEP) improved maternal psychosocial health outcomes (parenting stress, depressive symptoms, self-esteem, maternal attachment) and maternal-infant interaction among substance-addicted mothers (SAMs) actively engaged in outpatient rehabilitation. Designed as a randomized, three-group controlled trial testing two levels of psychoeducational intervention (IMPEP vs. PEP) and a control group (standard care parenting resources), the study was conducted in two substance abuse centers in southeast Florida on a convenience sample of 138 recovering SAM-infant pairs. IMPEP or PEP classes were held weekly on Weeks 2-5, with data collected at baseline (Week 1), Week 6, and Week 12 via structured interviews, observation (Observation Checklist on Maternal-Infant Interaction), and self-administered questionnaires (Abidin Parenting Stress Index, Beck Depression Inventory, Rosenberg Self-Esteem Scale, Muller's Maternal Attachment Inventory), analyzed descriptively and inferentially using Kruskall-Wallis analysis of variance and post hoc Wilcoxon rank sum and Mann-Whitney U tests. Both IMPEP and PEP groups had significantly increased Parenting Stress Index scores (decreased parenting stress) and decreased Beck Depression Inventory scores (decreased depressive symptoms) compared to controls at Week 12, whereas there were no clinically meaningful differences among study groups in Rosenberg Self-Esteem Scale, Muller's Maternal Attachment Inventory, or Observation Checklist on Maternal-Infant Interaction scores. Only the IMPEP group showed significant improvements in both psychological and physical (waist-hip ratio) measures of parenting stress over time. The findings suggest that infant massage blended into a structured parenting program has value-added effects in decreasing parenting stress and maternal depressive symptoms, but not on SAM's self-esteem, attachment, or maternal-infant interaction. Copyright © 2015. Published by Elsevier B.V.

Modified Fully Utilized Design (MFUD) Method for Stress and Displacement Constraints

NASA Technical Reports Server (NTRS)

Patnaik, Surya; Gendy, Atef; Berke, Laszlo; Hopkins, Dale

1997-01-01

The traditional fully stressed method performs satisfactorily for stress-limited structural design. When this method is extended to include displacement limitations in addition to stress constraints, it is known as the fully utilized design (FUD). Typically, the FUD produces an overdesign, which is the primary limitation of this otherwise elegant method. We have modified FUD in an attempt to alleviate the limitation. This new method, called the modified fully utilized design (MFUD) method, has been tested successfully on a number of designs that were subjected to multiple loads and had both stress and displacement constraints. The solutions obtained with MFUD compare favorably with the optimum results that can be generated by using nonlinear mathematical programming techniques. The MFUD method appears to have alleviated the overdesign condition and offers the simplicity of a direct, fully stressed type of design method that is distinctly different from optimization and optimality criteria formulations. The MFUD method is being developed for practicing engineers who favor traditional design methods rather than methods based on advanced calculus and nonlinear mathematical programming techniques. The Integrated Force Method (IFM) was found to be the appropriate analysis tool in the development of the MFUD method. In this paper, the MFUD method and its optimality are presented along with a number of illustrative examples.

Use of a student support group to reduce student stress in a nurse anesthesia program.

PubMed

Kless, J R

1989-02-01

Stress in nurse anesthesia programs may be excessive at times, especially in new students. While some degree of stress is necessary to motivate learning, excessive or prolonged stress can interfere with the normal learning process, thereby prolonging a student's clinical and academic progress. In the extreme, excessive stress may even preclude a student's successful completion of the educational program. Active faculty intervention through a student support group is advocated as a method for controlling stress levels and facilitating student learning. The positive effects of such intervention also increase the overall productivity of a program and better prepare nurse anesthesia students for their future careers.

Automatic stress-relieving music recommendation system based on photoplethysmography-derived heart rate variability analysis.

PubMed

Shin, Il-Hyung; Cha, Jaepyeong; Cheon, Gyeong Woo; Lee, Choonghee; Lee, Seung Yup; Yoon, Hyung-Jin; Kim, Hee Chan

2014-01-01

This paper presents an automatic stress-relieving music recommendation system (ASMRS) for individual music listeners. The ASMRS uses a portable, wireless photoplethysmography module with a finger-type sensor, and a program that translates heartbeat signals from the sensor to the stress index. The sympathovagal balance index (SVI) was calculated from heart rate variability to assess the user's stress levels while listening to music. Twenty-two healthy volunteers participated in the experiment. The results have shown that the participants' SVI values are highly correlated with their prespecified music preferences. The sensitivity and specificity of the favorable music classification also improved as the number of music repetitions increased to 20 times. Based on the SVI values, the system automatically recommends favorable music lists to relieve stress for individuals.

A Stress Inoculation Program for Parents Whose Children Are Undergoing Painful Medical Procedures.

ERIC Educational Resources Information Center

Jay, Susan M.; Elliott, Charles H.

1990-01-01

Compared program efficacy in helping parents cope with children's painful medical procedures. Parents (n=72) of pediatric leukemia patients participated in either stress inoculation program or observed child participating in cognitive behavior therapy. Found parents in stress inoculation program reported lower anxiety scores and higher positive…

Mass spectrometry-based plant metabolomics: Metabolite responses to abiotic stress.

PubMed

Jorge, Tiago F; Rodrigues, João A; Caldana, Camila; Schmidt, Romy; van Dongen, Joost T; Thomas-Oates, Jane; António, Carla

2016-09-01

Metabolomics is one omics approach that can be used to acquire comprehensive information on the composition of a metabolite pool to provide a functional screen of the cellular state. Studies of the plant metabolome include analysis of a wide range of chemical species with diverse physical properties, from ionic inorganic compounds to biochemically derived hydrophilic carbohydrates, organic and amino acids, and a range of hydrophobic lipid-related compounds. This complexitiy brings huge challenges to the analytical technologies employed in current plant metabolomics programs, and powerful analytical tools are required for the separation and characterization of this extremely high compound diversity present in biological sample matrices. The use of mass spectrometry (MS)-based analytical platforms to profile stress-responsive metabolites that allow some plants to adapt to adverse environmental conditions is fundamental in current plant biotechnology research programs for the understanding and development of stress-tolerant plants. In this review, we describe recent applications of metabolomics and emphasize its increasing application to study plant responses to environmental (stress-) factors, including drought, salt, low oxygen caused by waterlogging or flooding of the soil, temperature, light and oxidative stress (or a combination of them). Advances in understanding the global changes occurring in plant metabolism under specific abiotic stress conditions are fundamental to enhance plant fitness and increase stress tolerance. © 2015 Wiley Periodicals, Inc. Mass Spec Rev 35:620-649, 2016. © 2015 Wiley Periodicals, Inc.

Gamma-oryzanol rich fraction regulates the expression of antioxidant and oxidative stress related genes in stressed rat's liver.

PubMed

Ismail, Maznah; Al-Naqeeb, Ghanya; Mamat, Wan Abd Aziz Bin; Ahmad, Zalinah

2010-03-24

Gamma-oryzanol (OR), a phytosteryl ferulate mixture extracted from rice bran oil, has a wide spectrum of biological activities in particular, it has antioxidant properties. The regulatory effect of gamma-oryzanol rich fraction (ORF) extracted and fractionated from rice bran using supercritical fluid extraction (SFE) in comparison with commercially available OR on 14 antioxidant and oxidative stress related genes was determined in rat liver. Rats were subjected to a swimming exercise program for 10 weeks to induce stress and were further treated with either ORF at 125, 250 and 500 mg/kg or OR at 100 mg/kg in emulsion forms for the last 5 weeks of the swimming program being carried out. The GenomeLab Genetic Analysis System (GeXPS) was used to study the multiplex gene expression of the selected genes. Upon comparison of RNA expression levels between the stressed and untreated group (PC) and the unstressed and untreated group (NC), seven genes were found to be down-regulated, while seven genes were up-regulated in PC group compared to NC group. Further treatment of stressed rats with ORF at different doses and OR resulted in up-regulation of 10 genes and down regulation of four genes compared to the PC group. Gamma-oryzanol rich fraction showed potential antioxidant activity greater than OR in the regulation of antioxidants and oxidative stress gene markers.

Effect of Root Filling on Stress Distribution in Premolars with Endodontic-Periodontal Lesion: A Finite Elemental Analysis Study.

PubMed

Belli, Sema; Eraslan, Oğuz; Eskitascioglu, Gürcan

2016-01-01

Endodontic-periodontal (EP) lesions require both endodontic and periodontal therapies. Impermeable sealing of the root canal system after cleaning and shaping is essential for a successful endodontic treatment. However, complete healing of the hard and soft tissue lesions takes time, and diseased bone, periodontal ligament, and tooth fibrous joints are reported to have an increased failure risk for a given load. Considering that EP lesions may affect the biomechanics of teeth, this finite elemental analysis study aimed to test the effect of root fillings on stress distribution in premolars with EP lesions. Three finite elemental analysis models representing 3 different types of EP lesions (primary endodontic disease [PED], PED with secondary periodontic involvement, and true combined) were created. The root canals were assumed as nonfilled or filled with gutta-percha, gutta-percha/apical mineral trioxide aggregate (MTA) plug, and MTA-based sealer. Materials used were assumed to be homogenous and isotropic. A 300-N load was applied from the buccal cusp of the crown with a 135° angle. The Cosmoworks structural-analysis program (SolidWorks Corp, Waltham, MA) was used for analysis. Results were presented considering von Mises criteria. Stresses at the root apex increased with an increase in lesion dimensions. Root filling did not affect stress distribution in the PED model. An MTA plug or MTA-based sealer created more stress areas within the root compared with the others in the models representing PED with periodontic involvement and true combined lesions. Stresses at the apical end of the root increase with increases in lesion dimensions. MTA-based sealers or an MTA plug creates more stresses when there is periodontic involvement or a true combined lesion. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

A Computer Program for Flow-Log Analysis of Single Holes (FLASH)

USGS Publications Warehouse

Day-Lewis, F. D.; Johnson, C.D.; Paillet, Frederick L.; Halford, K.J.

2011-01-01

A new computer program, FLASH (Flow-Log Analysis of Single Holes), is presented for the analysis of borehole vertical flow logs. The code is based on an analytical solution for steady-state multilayer radial flow to a borehole. The code includes options for (1) discrete fractures and (2) multilayer aquifers. Given vertical flow profiles collected under both ambient and stressed (pumping or injection) conditions, the user can estimate fracture (or layer) transmissivities and far-field hydraulic heads. FLASH is coded in Microsoft Excel with Visual Basic for Applications routines. The code supports manual and automated model calibration. ?? 2011, The Author(s). Ground Water ?? 2011, National Ground Water Association.

A History of Sandia’s Water Decision Modeling and Analysis Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowry, Thomas Stephen; Pate, Ronald C.

This document provides a brief narrative, and selected project descriptions, that represent Sandia’s history involving data, modeling, and analysis related to water, energy-water nexus, and energy-water-agriculture nexus within the context of climate change. Sandia National Laboratories has been engaged since the early-1990s with program development involving data, modeling, and analysis projects that address the interdependent issues, risks, and technology-based mitigations associated with increasing demands and stresses being placed on energy, water, and agricultural/food resources, and the related impacts on their security and sustainability in the face of both domestic and global population growth, expanding economic development, and climate change.

Design Through Manufacturing: The Solid Model - Finite Element Analysis Interface

NASA Technical Reports Server (NTRS)

Rubin, Carol

2003-01-01

State-of-the-art computer aided design (CAD) presently affords engineers the opportunity to create solid models of machine parts which reflect every detail of the finished product. Ideally, these models should fulfill two very important functions: (1) they must provide numerical control information for automated manufacturing of precision parts, and (2) they must enable analysts to easily evaluate the stress levels (using finite element analysis - FEA) for all structurally significant parts used in space missions. Today's state-of-the-art CAD programs perform function (1) very well, providing an excellent model for precision manufacturing. But they do not provide a straightforward and simple means of automating the translation from CAD to FEA models, especially for aircraft-type structures. The research performed during the fellowship period investigated the transition process from the solid CAD model to the FEA stress analysis model with the final goal of creating an automatic interface between the two. During the period of the fellowship a detailed multi-year program for the development of such an interface was created. The ultimate goal of this program will be the development of a fully parameterized automatic ProE/FEA translator for parts and assemblies, with the incorporation of data base management into the solution, and ultimately including computational fluid dynamics and thermal modeling in the interface.

Design of ceramic components with the NASA/CARES computer program

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Manderscheid, Jane M.; Gyekenyesi, John P.

1990-01-01

The ceramics analysis and reliability evaluation of structures (CARES) computer program is described. The primary function of the code is to calculate the fast-fracture reliability or failure probability of macro-scopically isotropic ceramic components. These components may be subjected to complex thermomechanical loadings, such as those found in heat engine applications. CARES uses results from MSC/NASTRAN or ANSYS finite-element analysis programs to evaluate how inherent surface and/or volume type flaws component reliability. CARES utilizes the Batdorf model and the two-parameter Weibull cumulative distribution function to describe the effects of multiaxial stress states on material strength. The principle of independent action (PIA) and the Weibull normal stress averaging models are also included. Weibull material strength parameters, the Batdorf crack density coefficient, and other related statistical quantities are estimated from four-point bend bar or uniform uniaxial tensile specimen fracture strength data. Parameter estimation can be performed for a single or multiple failure modes by using a least-squares analysis or a maximum likelihood method. Kolmogorov-Smirnov and Anderson-Darling goodness-to-fit-tests, 90 percent confidence intervals on the Weibull parameters, and Kanofsky-Srinivasan 90 percent confidence band values are also provided. Examples are provided to illustrate the various features of CARES.

Multiaxial Cyclic Thermoplasticity Analysis with Besseling's Subvolume Method

NASA Technical Reports Server (NTRS)

Mcknight, R. L.

1983-01-01

A modification was formulated to Besseling's Subvolume Method to allow it to use multilinear stress-strain curves which are temperature dependent to perform cyclic thermoplasticity analyses. This method automotically reproduces certain aspects of real material behavior important in the analysis of Aircraft Gas Turbine Engine (AGTE) components. These include the Bauschinger effect, cross-hardening, and memory. This constitutive equation was implemented in a finite element computer program called CYANIDE. Subsequently, classical time dependent plasticity (creep) was added to the program. Since its inception, this program was assessed against laboratory and component testing and engine experience. The ability of this program to simulate AGTE material response characteristics was verified by this experience and its utility in providing data for life analyses was demonstrated. In this area of life analysis, the multiaxial thermoplasticity capabilities of the method have proved a match for the actual AGTE life experience.

NASA/FLAGRO - FATIGUE CRACK GROWTH COMPUTER PROGRAM

NASA Technical Reports Server (NTRS)

Forman, R. G.

1994-01-01

Structural flaws and cracks may grow under fatigue inducing loads and, upon reaching a critical size, cause structural failure to occur. The growth of these flaws and cracks may occur at load levels well below the ultimate load bearing capability of the structure. The Fatigue Crack Growth Computer Program, NASA/FLAGRO, was developed as an aid in predicting the growth of pre-existing flaws and cracks in structural components of space systems. The earlier version of the program, FLAGRO4, was the primary analysis tool used by Rockwell International and the Shuttle subcontractors for fracture control analysis on the Space Shuttle. NASA/FLAGRO is an enhanced version of the program and incorporates state-of-the-art improvements in both fracture mechanics and computer technology. NASA/FLAGRO provides the fracture mechanics analyst with a computerized method of evaluating the "safe crack growth life" capabilities of structural components. NASA/FLAGRO could also be used to evaluate the damage tolerance aspects of a given structural design. The propagation of an existing crack is governed by the stress field in the vicinity of the crack tip. The stress intensity factor is defined in terms of the relationship between the stress field magnitude and the crack size. The propagation of the crack becomes catastrophic when the local stress intensity factor reaches the fracture toughness of the material. NASA/FLAGRO predicts crack growth using a two-dimensional model which predicts growth independently in two directions based on the calculation of stress intensity factors. The analyst can choose to use either a crack growth rate equation or a nonlinear interpolation routine based on tabular data. The growth rate equation is a modified Forman equation which can be converted to a Paris or Walker equation by substituting different values into the exponent. This equation provides accuracy and versatility and can be fit to data using standard least squares methods. Stress-intensity factor numerical values can be computed for making comparisons or checks of solutions. NASA/FLAGRO can check for failure of a part-through crack in the mode of a through crack when net ligament yielding occurs. NASA/FLAGRO has a number of special subroutines and files which provide enhanced capabilities and easy entry of data. These include crack case solutions, cyclic load spectrums, nondestructive examination initial flaw sizes, table interpolation, and material properties. The materials properties files are divided into two types, a user defined file and a fixed file. Data is entered and stored in the user defined file during program execution, while the fixed file contains already coded-in property value data for many different materials. Prompted input from CRT terminals consists of initial crack definition (which can be defined automatically), rate solution type, flaw type and geometry, material properties (if they are not in the built-in tables of material data), load spectrum data (if not included in the loads spectrum file), and design limit stress levels. NASA/FLAGRO output includes an echo of the input with any error or warning messages, the final crack size, whether or not critical crack size has been reached for the specified stress level, and a life history profile of the crack propagation. NASA/FLAGRO is modularly designed to facilitate revisions and operation on minicomputers. The program was implemented on a DEC VAX 11/780 with the VMS operating system. NASA/FLAGRO is written in FORTRAN77 and has a memory requirement of 1.4 MB. The program was developed in 1986.

A web-based training program using cognitive behavioral therapy to alleviate psychological distress among employees: randomized controlled pilot trial.

PubMed

Mori, Makiko; Tajima, Miyuki; Kimura, Risa; Sasaki, Norio; Somemura, Hironori; Ito, Yukio; Okanoya, June; Yamamoto, Megumi; Nakamura, Saki; Tanaka, Katsutoshi

2014-12-02

A number of psychoeducational programs based on cognitive behavioral therapy (CBT) to alleviate psychological distress have been developed for implementation in clinical settings. However, while these programs are considered critical components of stress management education in a workplace setting, they are required to be brief and simple to implement, which can hinder development. The intent of the study was to examine the effects of a brief training program based on CBT in alleviating psychological distress among employees and facilitating self-evaluation of stress management skills, including improving the ability to recognize dysfunctional thinking patterns, transform dysfunctional thoughts to functional ones, cope with stress, and solve problems. Of the 187 employees at an information technology company in Tokyo, Japan, 168 consented to participate in our non-blinded randomized controlled study. The training group received CBT group education by a qualified CBT expert and 1 month of follow-up Web-based CBT homework. The effects of this educational program on the psychological distress and stress management skills of employees were examined immediately after completion of training and then again after 6 months. Although the training group did exhibit lower mean scores on the Kessler-6 (K6) scale for psychological distress after 6 months, the difference from the control group was not significant. However, the ability of training group participants to recognize dysfunctional thinking was significantly improved both immediately after training completion and after 6 months. While the ability of participants to cope with stress was not significantly improved immediately after training, improvement was noted after 6 months in the training group. No notable improvements were observed in the ability of participants to transform thoughts from dysfunctional to functional or in problem-solving skills. A sub-analysis of participants who initially exhibited clinically significant psychological distress (K6 score ≥5) showed that the mean K6 score was significantly improved immediately after training completion for the training group compared to the control group (-2.50 vs -0.07; mean difference 2.43, 95% CI 0.55-4.31; d=0.61), with this effect remaining even after 6 months (-3.49 vs -0.50; mean difference 2.99, 95% CI 0.70-5.29; d=0.60). Our results suggest that a brief stress management program that combines group CBT education with Web-based CBT homework moderately alleviates the distress of employees with clinically significant psychological distress. In addition, the program might help improve employees' ability to evaluate their own stress management skills.

Computer Programs (Turbomachinery)

NASA Technical Reports Server (NTRS)

1978-01-01

NASA computer programs are extensively used in design of industrial equipment. Available from the Computer Software Management and Information Center (COSMIC) at the University of Georgia, these programs are employed as analysis tools in design, test and development processes, providing savings in time and money. For example, two NASA computer programs are used daily in the design of turbomachinery by Delaval Turbine Division, Trenton, New Jersey. The company uses the NASA splint interpolation routine for analysis of turbine blade vibration and the performance of compressors and condensers. A second program, the NASA print plot routine, analyzes turbine rotor response and produces graphs for project reports. The photos show examples of Delaval test operations in which the computer programs play a part. In the large photo below, a 24-inch turbine blade is undergoing test; in the smaller photo, a steam turbine rotor is being prepared for stress measurements under actual operating conditions; the "spaghetti" is wiring for test instrumentation

Patient Outcomes in Varying Length Post Traumatic Stress Disorder Programs at the Denver VA Medical Center

DTIC Science & Technology

1998-06-16

Post Traumatic Stress Disorder ( PTSD ...Outcomes 2 Abstract The Department of Veterans Affairs (DVA) has provided a number of treatment programs for Post Traumatic Stress Disorder ( PTSD ) including...D.C. Department of Veterans Affairs (1991). A Program Evaluation of the Department of Veterans Affairs Post Traumatic Stress Disorder ( PTSD )

Implementation of stress assessments by occupational health nurses working in occupational health agencies and their confidence in conducting such assessments.

PubMed

Ikeda, Chiseko; Saeki, Kazuko; Hirano, Michiyo

2016-06-21

Stress assessments are due to be conducted in December 2015. It is expected that there will be an increase in the number of private health agencies that provide stress assessment services and mental health care. This study aimed to clarify the current situation of and the factors related to stress assessments conducted by nurses in occupational health agencies. Nurses working full time were randomly selected from 60 organizations that were members of the National Federation of Industrial Health Organization. Self-administered questionnaires were sent out between November 2013 and January 2014. The questionnaire included the personal attributes of the participants, training programs, job contents, and how practical mental health care, including stress assessment, is. The study was approved by the ethics committees in the respective organizations. Out of the 162 questionnaires that were distributed, 89 (54.9%) were returned and 85 (53.1%) were valid for analysis. Stress assessments were conducted by 38.8% of the participants. With reference to their confidence in conducting stress assessments, "confidence and" 70.6%, respectively. The groups that conducted and did not conduct the stress assessments did not show any differences in the findings or other attributes. Further, the implementation of stress assessment was not associated with occupational health nurse (OHN) training, education, position, age, years of experience, attendance of lectures on mental health, etc. However, the confidence in conducting the assessment was related to age when dealing with cases on confidence stress assessment consultation in follow-up to the implementation of screening, such as stress, persons at high risk, and so on. Approximately 40% of the nurses were already conducting stress assessments, but most of them conducted such assessments about once a year and were not deeply involved in them. Approximately 70% of the nurses were confident in implementing stress assessments. Further, they reported that they were confident to do so even if OHNs were not involved. We found that to encourage OHNs in occupational health agencies to provide mental health care and stress assessments, practical training programs are required. Such programs should include a series of stress assessments and help foster cooperation with superiors, colleagues, and occupational health staff such that the OHNs obtain experience and confidence.

[The Effect of K-MBSR Program on Stress, Stress Coping Style, Depression, Anger and Sleep of Middle Aged Women].

PubMed

Park, Jeong Min; Choi, In Ryoung

2016-04-01

The purpose of this study was to examine a Korean Mindfulness Based Stress Reduction (K-MBSR) program for middle aged women and to verify the program's effectiveness on stress, stress coping style, depression, anger and sleep. Fifty-two women aged from 40 to 59 (26 in the experimental group and 26 in the control group) from G city participated in the study. Data were collected from February 13 to April 3, 2013. The experimental group received 8 sessions, scheduled once a week, with each session lasting two and a half hours. Outcome variables included stress, stress coping style, depression, anger, sleep and a physiological measure (EEG). There were significant decreases for stress (t=-2.14, p=.037), depression (t=-2.64, p=.011), state trait anger (t=-3.79, p<.001) in the experimental group compared to the control group. The findings in this study indicate that the K-MBSR program is an effective program to decrease stress, depression, and state trait anger in middle aged women.

Stress, depression, and anxiety among undergraduate nursing students.

PubMed

Chernomas, Wanda M; Shapiro, Carla

2013-11-07

Admission to a professional program marks the beginning of fulfilling a career goal. However, the rigors of professional education can be demanding. Stress, depression, and anxiety (SDA) can interfere with learning, affect academic performance, and impair clinical practice performance. Studies report a general increase in the severity of and extent of mental health problems among college/university students. The literature regarding nursing students' mental health distress identifies academic and personal sources of stress and coping efforts, with emphasis on the stress and anxiety associated with clinical practice. This cross-sectional descriptive exploratory study investigated levels of SDA among nursing students in 3 years of a university-based program. The association between quality of life indicators including known stressors, such as financial concerns and balance between school and personal life, and SDA was also investigated. Through an online survey, 437 participants from one mid-western Canadian undergraduate nursing program completed the Depression Anxiety Stress Scales and provided data on quality of life indicators and demographic information. Participants also were invited to provide narrative data about their experiences with SDA. This article will present significant findings including: levels of SDA; comparisons between our sample and a normative sample on the dimensions of SDA; and the results of multiple regression analysis identifying significant predictors of each dimension. Themes from the qualitative comments from 251 of the participants were identified and added depth and clarity to the quantitative findings. The predominant themes represented were: perceptions of clinical practice, coping, personal issues, and balancing school, work, and personal life. Implications and recommendations for curriculum design, ensuring students understand program expectations prior to admission, and enhancing accessibility to mental health/support services need to be considered.

Application of the ADAMS program to deployable space truss structures

NASA Technical Reports Server (NTRS)

Calleson, R. E.

1985-01-01

The need for a computer program to perform kinematic and dynamic analyses of large truss structures while deploying from a packaged configuration in space led to the evaluation of several existing programs. ADAMS (automatic dynamic analysis of mechanical systems), a generalized program from performing the dynamic simulation of mechanical systems undergoing large displacements, is applied to two concepts of deployable space antenna units. One concept is a one cube folding unit of Martin Marietta's Box Truss Antenna and the other is a tetrahedral truss unit of a Tetrahedral Truss Antenna. Adequate evaluation of dynamic forces during member latch-up into the deployed configuration is not yet available from the present version of ADAMS since it is limited to the assembly of rigid bodies. Included is a method for estimating the maximum bending stress in a surface member at latch-up. Results include member displacement and velocity responses during extension and an example of member bending stresses at latch-up.

"The Program Affects Me 'Cause it Gives Away Stress": Urban Students' Qualitative Perspectives on Stress and a School-Based Mindful Yoga Intervention.

PubMed

Dariotis, Jacinda K; Cluxton-Keller, Fallon; Mirabal-Beltran, Roxanne; Gould, Laura Feagans; Greenberg, Mark T; Mendelson, Tamar

School-based mindfulness and yoga studies generally measure stress-related outcomes using quantitative measures. This study answers the following research questions: How do youth define stress and in what ways, if any, was a mindful yoga intervention helpful to youth during stress experiences? To explore youths' own perspectives on stress, stressors in youths' lives, and perceived changes in responses to stress post-intervention, we conducted focus group discussions with 22 middle school students from low-income urban communities following a 16-week mindful yoga intervention. Using thematic analysis, the following three themes emerged: (1) youth conflated stress with negative emotions; (2) peer and family conflicts were common stressors; and (3) youth reported improved impulse control and emotional regulation following the intervention. Study findings have implications for refining intervention content (e.g., discussions of stress), as well as informing the selection and development of quantitative measures for future research on stress and stress responses in urban youth. Copyright © 2016 Elsevier Inc. All rights reserved.

Color It Real: A Program to Increase Condom Use and Reduce Substance Abuse and Perceived Stress

PubMed Central

Zellner, Tiffany; Trotter, Jennie; Lenoir, Shelia; Walston, Kelvin; Men-Na’a, L’dia; Henry-Akintobi, Tabia; Miller, Assia

2015-01-01

Few interventions have targeted perceived stress as a co-occurring construct central to substance use and subsequent HIV/AIDS risk reduction among African American urban young adults. The Color It Real Program was a seven session, weekly administered age-specific and culturally-tailored intervention designed to provide substance abuse and HIV education and reduce perceived stress among African Americans ages 18 to 24 in Atlanta, GA. Effectiveness was assessed through a quasi-experimental study design that consisted of intervention (n = 122) and comparison (n = 70) groups completing a pre- and post-intervention survey. A series of Analysis of Variance (ANOVA) tests were used to assess pre- to post-intervention changes between study groups. For intervention participants, perceived stress levels were significantly reduced by the end of the intervention (t(70) = 2.38, p = 0.020), condom use at last sexual encounter significantly increased (F = 4.43, p = 0.0360), intervention participants were significantly less likely to drink five or more alcoholic drinks in one sitting (F = 5.10, p = 0.0245), and to use clean needles when injecting the drug (F = 36.99, p = 0.0001). This study is among the first of its kind to incorporate stress management as an integral approach to HIV/SA prevention. The program has implications for the design of other community-based, holistic approaches to addressing substance use and risky behaviors for young adults. PMID:26703653

Three-Dimensional Finite Element Analysis of Varying Diameter and Connection Type in Implants with High Crown-Implant Ratio.

PubMed

Moraes, Sandra Lúcia Dantas de; Verri, Fellippo Ramos; Santiago, Joel Ferreira; Almeida, Daniel Augusto de Faria; Lemos, Cleidiel Aparecido Araujo; Gomes, Jéssica Marcela de Luna; Pellizzer, Eduardo Piza

2018-01-01

The aim of this study was to evaluate the effect of varying the diameter, connection type and loading on stress distribution in the cortical bone for implants with a high crown-implant ratio. Six 3D models were simulated with the InVesalius, Rhinoceros 3D 4.0 and SolidWorks 2011 software programs. Models were composed of bone from the posterior mandibular region; they included an implant of 8.5 mm length, diameter Ø 3.75 mm or Ø 5.00 mm and connection types such as external hexagon (EH), internal hexagon (IH) and Morse taper (MT). Models were processed using the Femap 11.2 and NeiNastran 11.0 programs and by using an axial force of 200 N and oblique force of 100 N. Results were recorded in terms of the maximum principal stress. Oblique loading showed high stress in the cortical bone compared to that shown by axial loading. The results showed that implants with a wide diameter showed more favorable stress distribution in the cortical bone region than regular diameter, regardless of the connection type. Morse taper implants showed better stress distribution compared to other connection types, especially in the oblique loading. Thus, oblique loading showed higher stress concentration in cortical bone tissue when compared with axial loading. Wide diameter implant was favorable for improved stress distribution in the cortical bone region, while Morse taper implants showed lower stress concentration than other connections.

Safety assessment for EPS electron-proton spectrometer

NASA Technical Reports Server (NTRS)

Gleeson, P.

1971-01-01

A safety analysis was conducted to identify the efforts required to assure relatively hazard free operation of the EPS and to meet the safety requirements of the program. Safety engineering criteria, principles, and techniques in applicable disciplines are stressed in the performance of the system and subsystem studies; in test planning; in the design, development, test, evaluation, and checkout of the equipment; and the operating procedures for the EPS program.

Hydrazine Gas Generator Program. [space shuttles

NASA Technical Reports Server (NTRS)

Kusak, L.; Marcy, R. D.

1975-01-01

The design and fabrication of a flight gas generator for the space shuttle were investigated. Critical performance parameters and stability criteria were evaluated as well as a scaling laws that could be applied in designing the flight gas generator. A test program to provide the necessary design information was included. A structural design, including thermal and stress analysis, and two gas generators were fabricated based on the results. Conclusions are presented.

Lack of A-factor production induces the expression of nutrient scavenging and stress-related proteins in Streptomyces griseus.

PubMed

Birkó, Zsuzsanna; Swiatek, Magdalena; Szájli, Emília; Medzihradszky, Katalin F; Vijgenboom, Erik; Penyige, András; Keseru, Judit; van Wezel, Gilles P; Biró, Sándor

2009-10-01

The small gamma-butyrolactone A-factor is an important autoregulatory signaling molecule for the soil-inhabiting streptomycetes. Starvation is a major trigger for development, and nutrients are provided by degradation of the vegetative mycelium via a process of programmed cell death, reusing proteins, nucleic acids, and cell wall material. The A-factor regulon includes many extracellular hydrolases. Here we show via proteomics analysis that many nutrient-scavenging and stress-related proteins were overexpressed in an A-factor non-producing mutant of Streptomyces griseus B-2682. Transcript analysis showed that this is primarily due to differential transcription of the target genes during early development. The targets include proteins relating to nutrient stress and environmental stress and an orthologue of the Bacillus sporulation control protein Spo0M. The enhanced expression of these proteins underlines the stress that is generated by the absence of A-factor. Wild-type developmental gene expression was restored to the A-factor non-producing mutant by the signaling protein Factor C in line with our earlier observation that Factor C triggers A-factor production.

Prenatal Maternal Stress Programs Infant Stress Regulation

ERIC Educational Resources Information Center

Davis, Elysia Poggi; Glynn, Laura M.; Waffarn, Feizal; Sandman, Curt A.

2011-01-01

Objective: Prenatal exposure to inappropriate levels of glucocorticoids (GCs) and maternal stress are putative mechanisms for the fetal programming of later health outcomes. The current investigation examined the influence of prenatal maternal cortisol and maternal psychosocial stress on infant physiological and behavioral responses to stress.…

Expansion of epicyclic gear dynamic analysis program

NASA Technical Reports Server (NTRS)

Boyd, Linda Smith; Pike, James A.

1987-01-01

The multiple mesh/single stage dynamics program is a gear tooth analysis program which determines detailed geometry, dynamic loads, stresses, and surface damage factors. The program can analyze a variety of both epicyclic and single mesh systems with spur or helical gear teeth including internal, external, and buttress tooth forms. The modifications refine the options for the flexible carrier and flexible ring gear rim and adds three options: a floating Sun gear option; a natural frequency option; and a finite element compliance formulation for helical gear teeth. The option for a floating Sun incorporates two additional degrees of freedom at the Sun center. The natural frequency option evaluates the frequencies of planetary, star, or differential systems as well as the effect of additional springs at the Sun center and those due to a flexible carrier and/or ring gear rim. The helical tooth pair finite element calculated compliance is obtained from an automated element breakup of the helical teeth and then is used with the basic gear dynamic solution and stress postprocessing routines. The flexible carrier or ring gear rim option for planetary and star spur gear systems allows the output torque per carrier and ring gear rim segment to vary based on the dynamic response of the entire system, while the total output torque remains constant.

[Effects of Mindfulness Meditation program on perceived stress, ways of coping, and stress response in breast cancer patients].

PubMed

Kang, Gwangsoon; Oh, Sangeun

2012-04-01

Purpose of this study was to examine the effects of the Mindfulness Meditation program on perceived stress, ways of coping, salivary cortisol level, and psychological stress response in patients with breast cancer. This was a quasi-experimental study with a non-equivalent control group pre-post test design. Participants in this study were 50 patients who had completed breast cancer treatment (experimental group, 25, control group, 25). The experimental group received the Mindfulness Meditation program for 3 hours/session/ week for 8 weeks. Data were analyzed using χ²-test and t-test for subject homogeneity verification, and ANCOVA to examine the hypotheses. The experimental group had significantly lower scores for perceived stress, emotional focused coping, salivary cortisol level, and psychological stress response compared to the control group. However, no significant differences were found between two groups for the scores on problem focused stress coping. According to the results, the Mindfulness Meditation program was useful for decreasing perceived stress, emotional focused coping, salivary cortisol level, and psychological stress response. Therefore, this program is an effective nursing intervention to decrease stress in patients with breast cancer.

Development of advanced structural analysis methodologies for predicting widespread fatigue damage in aircraft structures

NASA Technical Reports Server (NTRS)

Harris, Charles E.; Starnes, James H., Jr.; Newman, James C., Jr.

1995-01-01

NASA is developing a 'tool box' that includes a number of advanced structural analysis computer codes which, taken together, represent the comprehensive fracture mechanics capability required to predict the onset of widespread fatigue damage. These structural analysis tools have complementary and specialized capabilities ranging from a finite-element-based stress-analysis code for two- and three-dimensional built-up structures with cracks to a fatigue and fracture analysis code that uses stress-intensity factors and material-property data found in 'look-up' tables or from equations. NASA is conducting critical experiments necessary to verify the predictive capabilities of the codes, and these tests represent a first step in the technology-validation and industry-acceptance processes. NASA has established cooperative programs with aircraft manufacturers to facilitate the comprehensive transfer of this technology by making these advanced structural analysis codes available to industry.

Durability evaluation of ceramic components using CARES/LIFE

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Powers, Lynn M.; Janosik, Lesley A.; Gyekenyesi, John P.

1994-01-01

The computer program CARES/LIFE calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/or proof test loading. This program is an extension of the CARES (Ceramics Analysis and Reliability Evaluation of Structures) computer program. CARES/LIFE accounts for the phenomenon of subcritical crack growth (SCG) by utilizing the power law, Paris law, or Walker equation. The two-parameter Weibull cumulative distribution function is used to characterize the variation in component strength. The effects of multiaxial stresses are modeled using either the principle of independent action (PIA), the Weibull normal stress averaging method (NSA), or the Batdorf theory. Inert strength and fatigue parameters are estimated from rupture strength data of naturally flawed specimens loaded in static, dynamic, or cyclic fatigue. Application of this design methodology is demonstrated using experimental data from alumina bar and disk flexure specimens which exhibit SCG when exposed to water.

Durability evaluation of ceramic components using CARES/LIFE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nemeth, N.N.; Janosik, L.A.; Gyekenyesi, J.P.

1996-01-01

The computer program CARES/LIFE calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/or proof test loading. This program is an extension of the CARES (Ceramics Analysis and Reliability Evaluation of Structures) computer program. CARES/LIFE accounts for the phenomenon of subcritical crack growth (SCG) by utilizing the power law, Paris law, or Walker equation. The two-parameter Weibull cumulative distribution function is used to characterize the variation in component strength. The effects of multiaxial stresses are modeled using either the principle of independent action (PIA), the Weibull normal stress averaging method (NSA), or the Batdorf theory. Inert strength andmore » fatigue parameters are estimated from rupture strength data of naturally flawed specimens loaded in static, dynamic, or cyclic fatigue. Application of this design methodology is demonstrated using experimental data from alumina bar and disk flexure specimens, which exhibit SCG when exposed to water.« less

Can Degradation of Adhesive Interfaces Due to Water Storage Affect Stress Distributions? A Finite-Element Stress Analysis Study.

PubMed

Belli, Sema; Eraslan, Oğuz; Eskitaşcıoğlu, Gürcan

The aim of this finite-element stress analysis (FEA) was to determine the effect of degradation due to water storage on stress distributions in root-filled premolar models restored with composite using either a self-etch (SE) or an etch-and-rinse (E&R) adhesive. Four premolar FEA models including root filling, MOD cavity, and composite restorations were created. The cavities were assumed to be treated by SE or E&R adhesives and stored in water for 18 months. The elastic properties of the adhesive-dentin interface after 24-h and 18-month water storage were obtained from the literature and applied to the FEA models. A 300-N load was applied on the functional cusps of the models. The SolidWorks/Cosmosworks structural analysis program was used and the results were presented considering the von Mises stresses. Stresses in the cervical region increased over time on the load-application side of the main tooth models (SE: 84.11 MPa to 87.51 MPa; E&R: 100.24 MPa to 120.8 MPa). When the adhesive interfaces (hybrid layer, adhesive layer) and dentin were evaluated separately, the stresses near the root canal orifices increased over time in both models; however, this change was more noticeable in the E&R models. Stresses at the cavity corners decreased in the E&R model (within the adhesive layer), while SE models showed the opposite (within the hybrid layer). Change in the elastic modulus of the adhesive layer, hybrid layer, and dentin due to water storage has an effect on stresses in root-filled premolar models. The location and the level of the stresses differed depending on the adhesive used.

[Analysis of the movement of long axis and the distribution of principal stress in abutment tooth retained by conical telescope].

PubMed

Lin, Ying-he; Man, Yi; Qu, Yi-li; Guan, Dong-hua; Lu, Xuan; Wei, Na

2006-01-01

To study the movement of long axis and the distribution of principal stress in the abutment teeth in removable partial denture which is retained by use of conical telescope. An ideal three dimensional finite element model was constructed by using SCT image reconstruction technique, self-programming and ANSYS software. The static loads were applied. The displacement of the long axis and the distribution of the principal stress in the abutment teeth was analyzed. There is no statistic difference of displacenat and stress distribution among different three-dimensional finite element models. Generally, the abutment teeth move along the long axis itself. Similar stress distribution was observed in each three-dimensional finite element model. The maximal principal compressive stress was observed at the distal cervix of the second premolar. The abutment teeth can be well protected by use of conical telescope.

Numerical modeling analysis of stress transfer modification concepts for deep longwall mines. Report of investigations/1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vandergrift, T.L.; Jude, C.V.

1995-12-31

This U.S. Bureau of Mines (USBM) report evaluates three stress-transfer-modification concepts for their potential in reducing longwall gate road stresses and closures. In each of the three concepts--packwalling, gob infilling, and entry filling--support structures are constructed on the headgate side of the panel parallel with or inby the face line. When the headgate becomes the tailgate of the adjacent panel, these structures are in place to accept stresses transferred from the mined-out panel. Using the USBM nonlinear boundary-element program MULSIM/NL, baseline models of typical longwall stress transfer behavior were developed for both intermediate depth and deep mining conditions. These modelsmore » were verified by comparing model results with field measurements and observations. The stress-transfer-modification concepts were then incorporated into the deep baseline model to quantify the effects of each concept on tailgate closure.« less

Why is everyone so anxious?: an exploration of stress and anxiety in genetic counseling graduate students.

PubMed

Jungbluth, Chelsy; Macfarlane, Ian M; Veach, Patricia McCarthy; Leroy, Bonnie S

2011-06-01

Stress is an inevitable part of daily life. Studies of graduate student stress exist, but none include genetic counseling students. The present mixed-methods study investigated 225 genetic counseling students' stress and anxiety levels using the State-Trait Anxiety Inventory (STAI; Spielberger et al. 1983), frequency and intensity of stressors associated with their graduate experience, positive and challenging aspects of their experience, and their stress management advice for prospective students. Principal axis factor analysis yielded five conceptual factors underlying the stressors: Professional Uncertainty, Personal Life Events, Interpersonal Demands, Academic Demands, and Isolating Circumstances. Exploratory model fitting using regression yielded four significant predictors accounting for 19% of the variance in state anxiety: (1) trait anxiety, (2) the Interpersonal Demands factor, (3) the Isolating Circumstances factor, and (4) the interaction between the Professional Uncertainty factor and advanced student status. Content analysis of open-ended responses identified several themes. For instance, most students enjoyed what they were learning, interactions with colleagues, and affirmation of their career choice, while certain academic and professional challenges were particularly stressful (e.g., workload, time constraints, clinical rotations). Additional findings, program implications, and research recommendations are provided.

[Development and effects of emotional intelligence program for undergraduate nursing students: mixed methods research].

PubMed

Lee, Oi Sun; Gu, Mee Ock

2014-12-01

This study was conducted to develop and test the effects of an emotional intelligence program for undergraduate nursing students. The study design was a mixed method research. Participants were 36 nursing students (intervention group: 17, control group: 19). The emotional intelligence program was provided for 4 weeks (8 sessions, 20 hours). Data were collected between August 6 and October 4, 2013. Quantitative data were analyzed using Chi-square, Fisher's exact test, t-test, repeated measure ANOVA, and paired t-test with SPSS/WIN 18.0. Qualitative data were analyzed using content analysis. Quantitative results showed that emotional intelligence, communication skills, resilience, stress coping strategy, and clinical competence were significantly better in the experimental group compared to the control group. According to the qualitative results, the nursing students experienced improvement in emotional intelligence, interpersonal relationships, and empowerment, as well as a reduction in clinical practice stress after participation in the emotional intelligence program. Study findings indicate that the emotional intelligence program for undergraduate nursing students is effective and can be recommended as an intervention for improving the clinical competence of undergraduate students in a nursing curriculum.

Deformation of a geo-medium with considering for internal self-balancing stresses

NASA Astrophysics Data System (ADS)

Lavrikov, S. V.; Revuzhenko, A. F.

2016-11-01

Based on the general concept of rock as a medium with inner sources and sinks of energy, the authors consider an approach to mathematical modeling of a geo-medium with account for internal self-balancing stresses. The description of stresses and strains at the level of microstructural elements and macrovolume of the medium uses methods of non-Archimedean analysis. The model allows describing the accumulation of elastic energy in the form of internal self-balancing stresses. A finite element algorithm and a software program for solving plane boundary-value problems have been developed. The calculated data on rock specimen compression are given. It is shown that the behavior of plastic deformation zones depends on the pre-assigned initial microstresses.

A mathematical model for the stressed state analysis of cylindrical laminated-composite pressure vessels

NASA Astrophysics Data System (ADS)

Bak, Roman; Matyja, Tomasz

An algorithm and a computer program have been developed for calculating the strength of pressure vessels made of laminated composites. Numerical results for pressure vessels of Kevlar 49 laminates are compared with experimental data in the literature.

Advanced Vibration Analysis Tool Developed for Robust Engine Rotor Designs

NASA Technical Reports Server (NTRS)

Min, James B.

2005-01-01

The primary objective of this research program is to develop vibration analysis tools, design tools, and design strategies to significantly improve the safety and robustness of turbine engine rotors. Bladed disks in turbine engines always feature small, random blade-to-blade differences, or mistuning. Mistuning can lead to a dramatic increase in blade forced-response amplitudes and stresses. Ultimately, this results in high-cycle fatigue, which is a major safety and cost concern. In this research program, the necessary steps will be taken to transform a state-of-the-art vibration analysis tool, the Turbo- Reduce forced-response prediction code, into an effective design tool by enhancing and extending the underlying modeling and analysis methods. Furthermore, novel techniques will be developed to assess the safety of a given design. In particular, a procedure will be established for using natural-frequency curve veerings to identify ranges of operating conditions (rotational speeds and engine orders) in which there is a great risk that the rotor blades will suffer high stresses. This work also will aid statistical studies of the forced response by reducing the necessary number of simulations. Finally, new strategies for improving the design of rotors will be pursued.

Effects of Parenting Programs on Child Maltreatment Prevention: A Meta-Analysis.

PubMed

Chen, Mengtong; Chan, Ko Ling

2016-01-01

The objective of this study is to evaluate the effectiveness of parenting programs in reducing child maltreatment and modifying associated factors as well as to examine the moderator variables that are linked to program effects. For this meta-analysis, we searched nine electronic databases to identify randomized controlled trials published before September 2013. The effect sizes of various outcomes at different time points were computed. From the 3,578 studies identified, we selected 37 studies for further analysis. The total random effect size was 0.296. Our results showed that parenting programs successfully reduced substantiated and self-reported child maltreatment reports and reduced the potential for child maltreatment. The programs also reduced risk factors and enhanced protective factors associated with child maltreatment. However, the effects of the parenting programs on reducing parental depression and stress were limited. Parenting programs produced positive effects in low-, middle-, and high-income countries and were effective in reducing child maltreatment when applied as primary, secondary, or tertiary child maltreatment intervention. In conclusion, parenting programs are effective public health approaches to reduce child maltreatment. The evidence-based service of parenting programs could be widely adopted in future practice. © The Author(s) 2015.

Tools for Designing and Analyzing Structures

NASA Technical Reports Server (NTRS)

Luz, Paul L.

2005-01-01

Structural Design and Analysis Toolset is a collection of approximately 26 Microsoft Excel spreadsheet programs, each of which performs calculations within a different subdiscipline of structural design and analysis. These programs present input and output data in user-friendly, menu-driven formats. Although these programs cannot solve complex cases like those treated by larger finite element codes, these programs do yield quick solutions to numerous common problems more rapidly than the finite element codes, thereby making it possible to quickly perform multiple preliminary analyses - e.g., to establish approximate limits prior to detailed analyses by the larger finite element codes. These programs perform different types of calculations, as follows: 1. determination of geometric properties for a variety of standard structural components; 2. analysis of static, vibrational, and thermal- gradient loads and deflections in certain structures (mostly beams and, in the case of thermal-gradients, mirrors); 3. kinetic energies of fans; 4. detailed analysis of stress and buckling in beams, plates, columns, and a variety of shell structures; and 5. temperature dependent properties of materials, including figures of merit that characterize strength, stiffness, and deformation response to thermal gradients

Non-linear analysis and the design of Pumpkin Balloons: stress, stability and viscoelasticity

NASA Astrophysics Data System (ADS)

Rand, J. L.; Wakefield, D. S.

Tensys have a long-established background in the shape generation and load analysis of architectural stressed membrane structures Founded upon their inTENS finite element analysis suite these activities have broadened to encompass lighter than air structures such as aerostats hybrid air-vehicles and stratospheric balloons Winzen Engineering couple many years of practical balloon design and fabrication experience with both academic and practical knowledge of the characterisation of the non-linear viscoelastic response of the polymeric films typically used for high-altitude scientific balloons Both companies have provided consulting services to the NASA Ultra Long Duration Balloon ULDB Program Early implementations of pumpkin balloons have shown problems of geometric instability characterised by improper deployment and these difficulties have been reproduced numerically using inTENS The solution lies in both the shapes of the membrane lobes and also the need to generate a biaxial stress field in order to mobilise in-plane shear stiffness Balloons undergo significant temperature and pressure variations in flight The different thermal characteristics between tendons and film can lead to significant meridional stress Fabrication tolerances can lead to significant local hoop stress concentrations particularly adjacent to the base and apex end fittings The non-linear viscoelastic response of the envelope film acts positively to help dissipate stress concentrations However creep over time may produce lobe geometry variations that may

Analysis of offshore platforms lifting with fixed pile structure type (fixed platform) based on ASD89

NASA Astrophysics Data System (ADS)

Sugianto, Agus; Indriani, Andi Marini

2017-11-01

Platform construction GTS (Gathering Testing Sattelite) is offshore construction platform with fix pile structure type/fixed platform functioning to support the mining of petroleum exploitation. After construction fabrication process platform was moved to barges, then shipped to the installation site. Moving process is generally done by pull or push based on construction design determined when planning. But at the time of lifting equipment/cranes available in the work area then the moving process can be done by lifting so that moving activity can be implemented more quickly of work. This analysis moving process of GTS platform in a different way that is generally done to GTS platform types by lifting using problem is construction reinforcement required, so the construction can be moved by lifting with analyzing and checking structure working stress that occurs due to construction moving process by lifting AISC code standard and analysis using the SAP2000 structure analysis program. The analysis result showed that existing condition cannot be moved by lifting because stress ratio is above maximum allowable value that is 0.950 (AISC-ASD89). Overstress occurs on the member 295 and 324 with stress ratio value 0.97 and 0.95 so that it is required structural reinforcement. Box plate aplication at both members so that it produces stress ratio values 0.78 at the member 295 and stress ratio of 0.77 at the member 324. These results indicate that the construction have qualified structural reinforcement for being moved by lifting.

The Effect of Framework Design on Stress Distribution in Implant-Supported FPDs: A 3-D FEM Study

PubMed Central

Eraslan, Oguz; Inan, Ozgur; Secilmis, Asli

2010-01-01

Objectives: The biomechanical behavior of the superstructure plays an important role in the functional longevity of dental implants. However, information about the influence of framework design on stresses transmitted to the implants and supporting tissues is limited. The purpose of this study was to evaluate the effects of framework designs on stress distribution at the supporting bone and supporting implants. Methods: In this study, the three-dimensional (3D) finite element stress analysis method was used. Three types of 3D mathematical models simulating three different framework designs for implant-supported 3-unit posterior fixed partial dentures were prepared with supporting structures. Convex (1), concave (2), and conventional (3) pontic framework designs were simulated. A 300-N static vertical occlusal load was applied on the node at the center of occlusal surface of the pontic to calculate the stress distributions. As a second condition, frameworks were directly loaded to evaluate the effect of the framework design clearly. The Solidworks/Cosmosworks structural analysis programs were used for finite element modeling/analysis. Results: The analysis of the von Mises stress values revealed that maximum stress concentrations were located at the loading areas for all models. The pontic side marginal edges of restorations and the necks of implants were other stress concentration regions. There was no clear difference among models when the restorations were loaded at occlusal surfaces. When the veneering porcelain was removed, and load was applied directly to the framework, there was a clear increase in stress concentration with a concave design on supporting implants and bone structure. Conclusions: The present study showed that the use of a concave design in the pontic frameworks of fixed partial dentures increases the von Mises stress levels on implant abutments and supporting bone structure. However, the veneering porcelain element reduces the effect of the framework and compensates for design weaknesses. PMID:20922156

“Taking My Breath Away by Keeping Stress at Bay” - An Employee Assistance Program in the Automotive Assembly Plant

PubMed Central

SUNDRAM, Bala Murali; DAHLUI, Maznah; CHINNA, Karuthan

2014-01-01

Abstract Background The aim of this study was to evaluate the effectiveness of individual-focused stress management training namely Deep Breathing Exercise (DBE) on self-perceived occupational stress among male automotive assembly-line workers. Methods A quasi-experimental study was conducted at 2 automotive assembly plants in Malaysia over 9 months, from January 2012 to September 2012. Assembly-line workers from Plant A received DBE training while Plant B acted as a control by receiving pamphlets on stress and its ill-effects. Intention-to-treat analysis was conducted among the self-voluntary respondents in Plant A (n=468) and Plant B (n=293). The level of stress was measured using Depression Anxiety Stress Scales-21 (DASS-21) stress subscale. Results Significant favorable intervention effects were found in Plant A (Effect size=0.6) as compared to Plant B (Effect size=0.2) at the end of the study in those receiving DBE. Time and group interaction effects were examined using the repeated measure ANOVA test in which there was a significant group *time interaction effect [F (1, 1) = 272.45, P<0.001]. Conclusion The improvement in stress levels showed the potential of DBE training as part of Employee Assistance Program in the automotive assembly plant. Future studies should be carried out to assess the long term effects of an on-site relaxation training to provide stronger evidence for the introduction of DBE among assembly-line workers as a coping strategy to alleviate occupational stress. PMID:25988085

The Development of a Stress Management Program for the Adult Degree Completion Program Admissions Team at a Four-Year Private Liberal Arts College.

ERIC Educational Resources Information Center

Satterlee, Brian

A stress management program was developed for the adult degree completion program admissions team at Warner Southern College, a four-year private liberal arts college. A relatively recent stress-inducing change was caused by an administrative decision to expand the program offerings from five sites to seven, using current staff. Derived from the…

Correlation of predicted and measured thermal stresses on a truss-type aircraft structure

NASA Technical Reports Server (NTRS)

Jenkins, J. M.; Schuster, L. S.; Carter, A. L.

1978-01-01

A test structure representing a portion of a hypersonic vehicle was instrumented with strain gages and thermocouples. This test structure was then subjected to laboratory heating representative of supersonic and hypersonic flight conditions. A finite element computer model of this structure was developed using several types of elements with the NASA structural analysis (NASTRAN) computer program. Temperature inputs from the test were used to generate predicted model thermal stresses and these were correlated with the test measurements.

Stress on the Job: How Family Literacy Program Directors Perceive Occupational Stress

ERIC Educational Resources Information Center

Sandlin, Jennifer A.; Chen, Chia-Yin

2007-01-01

Little research has examined stress among family literacy administrators, although studies in other contexts reveal occupational stress can lead to illness, distress, and organizational problems. This article presents findings from a recent study of stress among family literacy program directors in Texas. Findings reveal family literacy program…

BUCKO- A BUCKLING ANALYSIS FOR RECTANGULAR PLATES WITH CENTRALLY LOCATED CUTOUTS

NASA Technical Reports Server (NTRS)

Nemeth, M. P.

1994-01-01

BUCKO is a computer program developed to predict the buckling load of a rectangular compression-loaded orthotropic plate with a centrally located cutout. The plate is assumed to be a balanced, symmetric laminate of uniform thickness. The cutout shape can be elliptical, circular, rectangular, or square. The BUCKO package includes sample data that demonstrates the essence of the program and its ease of usage. BUCKO uses an approximate one-dimensional formulation of the classical two-dimensional buckling problem following the Kantorovich method. The boundary conditions are considered to be simply supported unloaded edges and either clamped or simply supported loaded edges. The plate is loaded in uniaxial compression by either uniformly displacing or uniformly stressing two opposite edges of the plate. The BUCKO analysis consists of two parts: calculation of the inplane stress distribution prior to buckling, and calculation of the plate axial load and displacement at buckling. User input includes plate planform and cutout geometry, plate membrane and bending stiffnesses, finite difference parameters, boundary condition data, and loading data. Results generated by BUCKO are the prebuckling strain energy, inplane stress resultants, buckling mode shape, critical end shortening, and average axial and transverse strains at buckling. BUCKO is written in FORTRAN V for batch execution and has been implemented on a CDC CYBER 170 series computer operating under NOS with a central memory requirement of approximately 343K of 60 bit words. This program was developed in 1984 and was last updated in 1990.

Student perception of initial transition into a nursing program: A mixed methods research study.

PubMed

McDonald, Meghan; Brown, Janine; Knihnitski, Crystal

2018-05-01

Transition into undergraduate education programs is stressful and impacts students' well-being and academic achievement. Previous research indicates nursing students experience stress, depression, anxiety, and poor lifestyle habits which interfere with learning. However, nursing students' experience of transition into nursing programs has not been well studied. Incongruence exists between this lack of research and the desire to foster student success. This study analyzed students' experiences of initial transition into a nursing program. An embedded mixed method design. A single site of a direct-entry, four year baccalaureate Canadian nursing program. All first year nursing students enrolled in the fall term of 2016. This study combined the Student Adaptation to College Questionnaire (SACQ) with a subset of participants participating in qualitative focus groups. Quantitative data was analyzed using descriptive statistics to identify statistically significant differences in full-scale and subscale scores. Qualitative data was analyzed utilizing thematic analysis. Significant differences were seen between those who moved to attend university and those who did not, with those who moved scoring lower on the Academic Adjustment subscale. Focus group thematic analysis highlighted how students experienced initial transition into a baccalaureate nursing program. Identified themes included reframing supports, splitting focus/finding focus, negotiating own expectations, negotiating others' expectations, and forming identity. These findings form the Undergraduate Nursing Initial Transition (UNIT) Framework. Significance of this research includes applications in faculty development and program supports to increase student success in the first year of nursing and to provide foundational success for ongoing nursing practice. Copyright © 2018 Elsevier Ltd. All rights reserved.

[Application of multiple-attribute utility technology (MAUT) to decisions about a work-site stress-control intervention for public-sector office workers].

PubMed

Hagihara, Akihito; Tarumi, Kimio

2013-01-01

The reasons behind the establishment of particular health-promotion programs in community or work settings are often unclear, and such programs are rarely evaluated from a broad perspective after they are implemented. Thus, multiattribute utility technology (MAUT) was used to design a work-site stress-control program. The sample consisted of public-sector workers in B City in Japan. Stakeholders in the work-site stress-control program included employers (municipal authorities), employees (public workers), and healthcare personnel. Six goals and three strategies (i.e., personnel, self-care, and staff) related to stress-control programs were considered. The results showed that the self-care strategy received the highest score for overall utility (i.e., 96.2), and the overall-utility score for the remaining two strategies was approximately 70. The self-care strategy emerged as the most useful of the three strategies for developing a stress-control program in a target work place. The application of MAUT may be useful for developing an effective stress-control program in occupational settings.

A brief cognitive-behavioral stress management program for secondary school teachers.

PubMed

Leung, Sharron S K; Chiang, Vico C L; Chui, Y Y; Mak, Y W; Wong, Daniel F K

2011-01-01

This study aimed to assess the efficacy of a brief cognitive-behavioral program that was designed to reduce the work-related stress levels of secondary school teachers. A quasi-experimental design was used to compare the intervention groups with the wait-list control groups. Seventy teachers from the intervention groups and 54 from the control groups completed a set of validated scales at the baseline and 3-4 wk later. The scales included the Depression Anxiety Stress Scale, the Dysfunctional Attitude Scale-Form A, the Health-Promoting Lifestyle Profile II, and the Occupational Stress Inventory Revised Edition. After controlling for the baseline measures, the intervention groups had significantly lower role stress, personal strain and overall work-related stress 3-4 wk after the baseline measurements. The intervention groups also had significantly higher stress management behaviors, and less general stress and dysfunctional thoughts than the control groups (all p≤0.05). The levels of dysfunctional thoughts and stress management behaviors significantly predicted general stress after intervention and personal resource deficits. The level of dysfunctional thoughts also predicted the personal strain of work-related stresses (all p<0.05). The brief program reported in this study was efficacious in reducing the work-related stress of secondary teachers. Teachers experienced less work-related stress after the program, and they reported reduced dysfunctional thoughts and enhanced stress management behaviors. This program may be considered as an initial strategy for teachers to develop skills to cope with their work-related stress in the short term and could be incorporated with other strategies to achieve longer-term effects.

Women and stress: a community prevention and health promotion program.

PubMed

Adam, D

1989-12-01

The past few decades have witnessed the launching of many health education and promotion programs for women, including Odyssée, Nouveaux départs and Women and Stress (Stress au féminin). Women and Stress was developed jointly by the Union culturelle des Franco-ontariennes, mental health professionals and representatives of the target audience. Its purpose is to help women take charge of their own health and their own bodies. This 15-hour group program, intended for French-speaking women in Ontario, includes six workshops that identify the symptoms and sources of stress and teach effective stress management strategies. The program is original in that it was designed primarily to be delivered by non-professionals in the community. According to the results of an evaluation by 360 participants, the program was an immediate success: it attained its health education and promotion objectives, and fostered community control in the area of prevention and health promotion.

Integral flange design program. [procedure for computing stresses

NASA Technical Reports Server (NTRS)

Wilson, J. F.

1974-01-01

An automated interactive flange design program utilizing an electronic desk top calculator is presented. The program calculates the operating and seating stresses for circular flanges of the integral or optional type subjected to internal pressure. The required input information is documented. The program provides an automated procedure for computing stresses in selected flange geometries for comparison to the allowable code values.

Design sensitivity analysis with Applicon IFAD using the adjoint variable method

NASA Technical Reports Server (NTRS)

Frederick, Marjorie C.; Choi, Kyung K.

1984-01-01

A numerical method is presented to implement structural design sensitivity analysis using the versatility and convenience of existing finite element structural analysis program and the theoretical foundation in structural design sensitivity analysis. Conventional design variables, such as thickness and cross-sectional areas, are considered. Structural performance functionals considered include compliance, displacement, and stress. It is shown that calculations can be carried out outside existing finite element codes, using postprocessing data only. That is, design sensitivity analysis software does not have to be imbedded in an existing finite element code. The finite element structural analysis program used in the implementation presented is IFAD. Feasibility of the method is shown through analysis of several problems, including built-up structures. Accurate design sensitivity results are obtained without the uncertainty of numerical accuracy associated with selection of a finite difference perturbation.

Mesh generation for two-dimensional regions using the Tektronix DVST (direct view storage tube) graphics terminal

NASA Technical Reports Server (NTRS)

Gabrielson, V. K.

1975-01-01

The computer program DVMESH and the use of the Tektronix DVST graphics terminal were described for applications of preparing mesh data for use in various two-dimensional axisymmetric finite element stress analysis and heat transfer codes.

Needs and Acculturative Stress of International Students in CACREP Programs

ERIC Educational Resources Information Center

Behl, Malvika; Laux, John M.; Roseman, Christopher P.; Tiamiyu, Mojisola; Spann, Sammy

2017-01-01

International students enrolled in programs accredited by the Council for Accreditation of Counseling and Related Educational Programs provided acculturative stress and needs data. Acculturative stress was correlated with academic, social, language, and cultural needs. Furthermore, relationships were found between students' types of needs.…

Strength evaluation of socket joints

NASA Technical Reports Server (NTRS)

Rash, Larry C.

1994-01-01

This report documents the development of a set of equations that can be used to provide a relatively simple solution for identifying the strength of socket joints and for most cases avoid the need of more lengthy analyses. The analytical approach was verified by comparison of the contact load distributions to results obtained from a finite element analysis. The contacting surfaces for the specific joint in this analysis are in the shape of frustrums of a cone and are representative of the tapered surfaces in the socket-type joints used to join segments of model support systems for wind tunnels. The results are in the form of equations that can be used to determine the contact loads and stresses in the joint from the given geometry and externally applied loads. Equations were determined to define the bending moments and stresses along the length of the joints based on strength and materials principles. The results have also been programmed for a personal computer and a copy of the program is included.

New Horizons in Organizational Stress Prevention Approaches.

ERIC Educational Resources Information Center

McGaffey, Thomas N.

1978-01-01

Discusses and describes some active Employee Assistance Programs (EAPs). An EAP is a stress intervention program that, when combined with other stress prevention procedures, can serve as an effective base for developing a comprehensive managerial system for combating organizational stress. (Author/IRT)

PERSONALITY TRAITS AND STRESS LEVELS AMONG SENIOR DENTAL STUDENTS: EVIDENCE FROM MALAYSIA AND SINGAPORE.

PubMed

Yusof, Zamros Y M; Hassan, Wan Nurazreena Wan; Razak, Ishak A; Hashim, Siti Marini N; Tahir, Mohd Khairul A M; Keng, Siong Beng

2016-11-01

This study aimed to evaluate the association between dental students’ personality traits and stress levels in relation to dental education programs among senior dental students in University Malaya (UM) in Malaysia and National University of Singapore (NUS). A cross-sectional survey using a self-administered questionnaire was conducted on UM and NUS senior dental students. The questionnaire comprised items on demographic background, the Big Five Inventory Personality Traits (BFIPT) test and a modified Dental Environment Stress (DES) scale. Rasch analysis was used to convert raw data to interval scores. Analyses were done by t-test, Pearson correlation, and Hierarchical regression statistics. The response rate was 100% (UM=132, NUS=76). Personality trait Agreeableness (mean=0.30) was significantly more prevalent among UM than NUS students (mean=0.15, p=0.016). In NUS, Neuroticism (mean=0.36) was significantly more prevalent than in UM (mean=0.14, p=0.002). The DES mean score was higher among NUS (mean=0.23) than UM students (mean=0.07). In UM, Neuroticism was significantly correlated with stress levels (r=0.338, p<0.001). In NUS, these were Neuroticism (r=0.278, p=0.015), Agreeableness (r=0.250, p=0.029) and Conscientiousness (r=-0.242, p=0.035) personality traits. The correlation was strongest for personality trait Neuroticism in both schools. Hierarchical regression analysis showed that gender and Neuroticism were significant predictors for students’ stress levels (p<0.05) with the latter exerting a bigger effect size (R2=0.18) than gender (R2=004). This study showed that gender and Neuroticism personality trait were significant predictors for stress levels among selected groups of dental students in Southeast Asia. Information on students’ personality may be useful in new students’ intake, stress management counseling and future program reviews.

Development of a curved pipe capability for the NASTRAN finite element program

NASA Technical Reports Server (NTRS)

Jeter, J. W., Jr.

1977-01-01

A curved pipe element capability for the NASTRAN structural analysis program is developed using the NASTRAN dummy element feature. A description is given of the theory involved in the subroutines which describe stiffness, mass, thermal and enforced deformation loads, and force and stress recovery for the curved pipe element. Incorporation of these subroutines into NASTRAN is discussed. Test problems are proposed. Instructions on use of the new element capability are provided.

Reliability Growth Testing Effectiveness.

DTIC Science & Technology

1984-01-01

interface boundaries. f. Test facility and equipment descriptions and requirements. g. Procedures and timing for corrective acticns. Uh . Blocks of tme and...apporLionment, FMEA and stress analysis. Instead, reiiability "growth management provides a means of viewing all the reliability program activities in an...A VENDOR SURVEILLANCE 8 A A R GROWTH ESTING. A R PROGRAM4 C B A A NORMALIZED INCREASE 0 2.5% 25% 60 % IN ACQUISITION COST RELATIVE CHANGE IN 1:1 4:1

[Mind-body approach in the area of preventive medicine: focusing on relaxation and meditation for stress management].

PubMed

Kang, Yunesik

2010-09-01

Emotional support and a stress management program should be simultaneously provided to clients as effective preventive services for healthy behavioral change. This study was conducted to review various relaxation and meditation intervention methods and their applicability for a preventive service program. The author of this paper tried to find various relaxation and meditation programs through a literature review and program searching and to introduce them. The 'Relaxation Response' and 'Mindfulness Based Stress Reduction (MBSR)' are the most the widely used meditative programs in mainstream medical systems. Abdominal breathing, Progressive Musclular Relaxation (PMR), Relaxative Imagery, Autogenic Training (AT) and Biofeedback are other well-known techniques for relaxation and stress management. I have developed and implemented some programs using these methods. Relaxation and meditation classes for cancer patients and a meditation based stress coping workshop are examples of this program. Relaxation and meditation seem to be good and effective methods for primary, secondary and tertiary preventive service programs. Program development and standardization and further study are needed for more and wider use of the mind-body approach in the preventive service area of medicine.

Biomechanical behavior of cavity configuration on micropush-out test: a finite-element-study.

PubMed

Cekic-Nagas, Isil; Shinya, Akikazu; Ergun, Gulfem; Vallittu, Pekka K; Lassila, Lippo V J

2011-01-01

The objective of this study was to simulate the micropush-out bond strength test from a biomechanical point of view. For this purpose, stress analysis using finite element (FE) method was performed. Three different occlusal cavity shapes were simulated in disc specimens (model A: 1.5 mm cervical, 2 mm occlusal diameter; model B: 1.5 mm cervical, 1.75 mm occlusal diameter; model C: 1.5 mm cervical, 1.5 mm occlusal diameter). Quarter sizes of 3D FE specimen models of 4.0 x 4.0 x 1.25 mm3 were constructed. In order to avoid quantitative differences in the stress value in the models, models were derived from a single mapping mesh pattern that generated 47.182 elements and 66.853 nodes. The materials that were used were resin composite (Filtek Z250, 3M ESPE), bonding agent (Adper Scotchbond Multi-Purpose, 3M ESPE) and dentin as an isotropic material. Loading conditions consisted of subjecting a press of 4 MPa to the top of the resin composite discs. The postprocessing files allowed the calculation of the maximum principal stress, minimum principal stress and displacement within the disc specimens and stresses at the bonding layer. FE model construction and analysis were performed on PC workstation (Precision Work Station 670, Dell Inc.) using FE analysis program (ANSYS 10 Sp, ANSYS Inc.). Compressive stress concentrations were observed equally in the bottom interface edge of dentin. Tensile stresses were observed on the top area of dentin and at the half of lower side of composite under the loading point in all of the FE models. The FE model revealed differences in displacement and stress between different cavity shaped disc specimens. As the slope of the cavity was increased, the maximum displacement, compressive and tensile stresses also increased.

Analysis of stress levels among medical students, residents, and graduate students at four Canadian schools of medicine.

PubMed

Toews, J A; Lockyer, J M; Dobson, D J; Simpson, E; Brownell, A K; Brenneis, F; MacPherson, K M; Cohen, G S

1997-11-01

To assess stress in medical students, residents, and graduate science students at four Canadian schools of medicine. Four schools with different curricula in three different parts of Canada participated in the study: the University of Calgary Faculty of Medicine, the University of Alberta Faculty of Medicine, the Dalhousie University Faculty of Medicine, and the McMaster University Faculty of Health Sciences. All the medical students, residents, and graduate science students at each school were surveyed in 1994-95. The three instruments used were the University of Calgary Stress Questionnaire, the Social Readjustment Rating Scale (SRRS), and the Symptom Checklist-90. Demographic data were compared across all four schools. Analysis of variance was calculated for all test-item scores, utilizing a four (school) by three (program) by two (gender) design, which were all between subject factors. Significant main effects were followed up by using planned comparisons (Newman-Keuls, with a probability level of p < .05). Significant interaction effects were followed up by using an analysis of simple effects. A total of 1,681 questionnaires were returned as follows: 621 of 1,304 (48%) from the medical students, 645 of 1,495 (43%) from the residents, and 415 of 829 (50%) from the graduate science students. There were significant differences between the three groups in the natures and degrees of stress, with the graduate students reporting higher levels of stress. There were significant gender differences as well, with the women reporting higher levels of stress. Overall, stress levels were found to be mild, based on the University of Calgary Stress Questionnaire and the SRRS. This study suggests that medical students and residents experience stress at levels that appear acceptable, but ongoing monitoring and the provision of appropriate support systems will continue to be important.

EXERCISE AND STRESS MANAGEMENT TRAINING PRIOR TO HEMATOPOIETIC CELL TRANSPLANTATION: BLOOD AND MARROW TRANSPLANT CLINICAL TRIALS NETWORK (BMT CTN) 0902

PubMed Central

Jacobsen, Paul B.; Le-Rademacher, Jennifer; Jim, Heather; Syrjala, Karen; Wingard, John R.; Logan, Brent; Wu, Juan; Majhail, Navneet S.; Wood, William; Rizzo, J. Douglas; Geller, Nancy L.; Kitko, Carrie; Faber, Edward; Abidi, Muneer H.; Slater, Susan; Horowitz, Mary M.; Lee, Stephanie J.

2014-01-01

Studies show that engaging patients in exercise and/or stress management techniques during hematopoietic cell transplantation (HCT) improves quality of life. The Blood and Marrow Transplant Clinical Trials Network tested the efficacy of training patients to engage in self-directed exercise and stress management during their HCTs. The study randomized 711 patients at 21 centers to receive one of four training interventions before HCT: a self-directed exercise program, a self-administered stress management program, both or neither. Participants completed self-reported assessments at enrollment and up to 180 days after transplant. Randomization was stratified by center and transplant type. There were no differences in the primary endpoints of the physical (PCS) and mental (MCS) component scales of the SF36 at day 100 among the groups based on an intention-to-treat analysis. There were no differences observed in overall survival, hospital days through day 100 post-HCT, or in other patient-reported outcomes, including treatment-related distress, sleep quality, pain, and nausea. Patient randomized to training in stress management reported more use of those techniques; patients randomized to training in exercise did not report more physical activity. Although other studies have reported efficacy of more intensive interventions, brief training in an easy-to-disseminate format for either self-directed exercise or stress management was not effective in our trial. PMID:24910380

The Effect of Stress Management Training Program on Stress Coping Styles among the Adolescents in Prison in Turkey.

PubMed

Öztürk, Özlem; Ocakçı, Ayşe F

2017-08-01

This study was performed to determine the effects of a stress management training program that was administered to adolescents in prison. This was a semi-experimental study that used pretests and posttests in controlled groups; it was performed between June 2012 and March 2013 in a closed prison for children and adolescents. The study was completed with the participation of 73 adolescents (36 in the experimental group and 37 in the control group). Adolescent Lifestyle Profile scale and the Stress Coping Styles Scale were used as the data collection tools. The Stress Management Training Program was developed by the researchers and carried out for 2 weeks, a total of 10 sessions of 40 min each. The scales were administered before the program was implemented, immediately after the program and 1 month following the program. Although there were no statistically significant differences between the mean Stress Coping Styles Scale scores of the experimental and control groups before the intervention (p > 0.05), a statistically significant difference was found after the intervention and at re-test (p < 0.05). This study has shown that this training program could be implemented with adolescents in prison, and the program was effective in providing positive behavioural changes in stress management. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Gamma-oryzanol rich fraction regulates the expression of antioxidant and oxidative stress related genes in stressed rat's liver

PubMed Central

2010-01-01

Background Gamma-oryzanol (OR), a phytosteryl ferulate mixture extracted from rice bran oil, has a wide spectrum of biological activities in particular, it has antioxidant properties. Methods The regulatory effect of gamma-oryzanol rich fraction (ORF) extracted and fractionated from rice bran using supercritical fluid extraction (SFE) in comparison with commercially available OR on 14 antioxidant and oxidative stress related genes was determined in rat liver. Rats were subjected to a swimming exercise program for 10 weeks to induce stress and were further treated with either ORF at 125, 250 and 500 mg/kg or OR at 100 mg/kg in emulsion forms for the last 5 weeks of the swimming program being carried out. The GenomeLab Genetic Analysis System (GeXPS) was used to study the multiplex gene expression of the selected genes. Results Upon comparison of RNA expression levels between the stressed and untreated group (PC) and the unstressed and untreated group (NC), seven genes were found to be down-regulated, while seven genes were up-regulated in PC group compared to NC group. Further treatment of stressed rats with ORF at different doses and OR resulted in up-regulation of 10 genes and down regulation of four genes compared to the PC group. Conclusions Gamma-oryzanol rich fraction showed potential antioxidant activity greater than OR in the regulation of antioxidants and oxidative stress gene markers. PMID:20331906

Creep and stress relaxation induced by interface diffusion in metal matrix composites

NASA Astrophysics Data System (ADS)

Li, Yinfeng; Li, Zhonghua

2013-03-01

An analytical solution is developed to predict the creep rate induced by interface diffusion in unidirectional fiber-reinforced and particle reinforced composites. The driving force for the interface diffusion is the normal stress acting on the interface, which is obtained from rigorous Eshelby inclusion theory. The closed-form solution is an explicit function of the applied stress, volume fraction and radius of the fiber, as well as the modulus ratio between the fiber and the matrix. It is interesting that the solution is formally similar to that of Coble creep in polycrystalline materials. For the application of the present solution in the realistic composites, the scale effect is taken into account by finite element analysis based on a unit cell. Based on the solution, a closed-form solution is also given as a description of stress relaxation induced by interfacial diffusion under constant strain. In addition, the analytical solution for the interface stress presented in this study gives some insight into the relationship between the interface diffusion and interface slip. This work was supported by the financial support from the Nature Science Foundation of China (No. 10932007), the National Basic Research Program of China (No. 2010CB631003/5), and the Doctoral Program of Higher Education of China (No. 20100073110006).

Ceramic component reliability with the restructured NASA/CARES computer program

NASA Technical Reports Server (NTRS)

Powers, Lynn M.; Starlinger, Alois; Gyekenyesi, John P.

1992-01-01

The Ceramics Analysis and Reliability Evaluation of Structures (CARES) integrated design program on statistical fast fracture reliability and monolithic ceramic components is enhanced to include the use of a neutral data base, two-dimensional modeling, and variable problem size. The data base allows for the efficient transfer of element stresses, temperatures, and volumes/areas from the finite element output to the reliability analysis program. Elements are divided to insure a direct correspondence between the subelements and the Gaussian integration points. Two-dimensional modeling is accomplished by assessing the volume flaw reliability with shell elements. To demonstrate the improvements in the algorithm, example problems are selected from a round-robin conducted by WELFEP (WEakest Link failure probability prediction by Finite Element Postprocessors).

Genome-wide analysis of autophagy-related genes (ARGs) in grapevine and plant tolerance to copper stress.

PubMed

Shangguan, Lingfei; Fang, Xiang; Chen, Lide; Cui, Liwen; Fang, Jinggui

2018-06-01

Grapevine autophagy-related genes (ARGs) include 35 members that have unique evolutionary backgrounds and expression patterns, with some of them responding to abiotic stresses, including copper stress. Autophagy is one of the most crucial self-regulating phenomena in livings organisms, including animals, plants, yeasts, etc. In the genomes of plants, like Arabidopsis, rice, tobacco, and barley, more than 30 autophagy-related genes (ARGs) have been found. These ARGs are involved in plant development, programed cell death, and the stress response process. In plants, and particularly in grapevine, high copper stress results from the application of the Bordeaux mixture, a widely used fungicide. However, the function of autophagy in plant tolerance to copper stress is unknown. Accordingly, in this study, a genome-wide analysis was performed to identify Vitis vinifera ARGs (VvARGs), and 35 VvARGs were detected. A gene family analysis revealed that the tandem and segmental duplication events played significant roles in the VvARG gene family expansion. Moreover, there was more intense signature of purifying selection for the comparison between grape and rice than between grape and Arabidopsis. In response to copper treatment, both the autophagosome number and malondialdehyde concentration increased during the initial 4 h post-treatment, and reached maximal values at 24 h. An expression analysis indicated that most VvARGs responded to copper stress at 4 h post-treatment, and some VvARGs (e.g., VvATG6, VvATG8i, and VvATG18h) exhibited responses to most abiotic stresses. These results provide a detailed overview of the ARGs in grapevine and indicate multiple functions of autophagy in fruit development and abiotic stresses in grapevine. The key ARG (e.g., ATG8i) should be investigated in more detail in grapevine and other plant species.

A Systematic Review of Biopsychosocial Training Programs for the Self-Management of Emotional Stress: Potential Applications for the Military

PubMed Central

Clausen, Shawn S.; Jonas, Wayne B.; Walter, Joan A. G.

2013-01-01

Combat-exposed troops and their family members are at risk for stress reactions and related disorders. Multimodal biopsychosocial training programs incorporating complementary and alternative self-management techniques have the potential to reduce stress-related symptoms and dysfunction. Such training can preempt or attenuate the posttraumatic stress response and may be effectively incorporated into the training cycle for deploying and redeploying troops and their families. A large systematic review was conducted to survey the literature on multimodal training programs for the self-management of emotional stress. This report is an overview of the randomized controlled trials (RCTs) identified in this systematic review. Select programs such as mindfulness-Based Stress Reduction, Cognitive Behavioral Stress Management, Autogenic Training, Relaxation Response Training, and other meditation and mind-body skills practices are highlighted, and the feasibility of their implementation within military settings is addressed. PMID:24174982

A systematic review of biopsychosocial training programs for the self-management of emotional stress: potential applications for the military.

PubMed

Crawford, Cindy; Wallerstedt, Dawn B; Khorsan, Raheleh; Clausen, Shawn S; Jonas, Wayne B; Walter, Joan A G

2013-01-01

Combat-exposed troops and their family members are at risk for stress reactions and related disorders. Multimodal biopsychosocial training programs incorporating complementary and alternative self-management techniques have the potential to reduce stress-related symptoms and dysfunction. Such training can preempt or attenuate the posttraumatic stress response and may be effectively incorporated into the training cycle for deploying and redeploying troops and their families. A large systematic review was conducted to survey the literature on multimodal training programs for the self-management of emotional stress. This report is an overview of the randomized controlled trials (RCTs) identified in this systematic review. Select programs such as mindfulness-Based Stress Reduction, Cognitive Behavioral Stress Management, Autogenic Training, Relaxation Response Training, and other meditation and mind-body skills practices are highlighted, and the feasibility of their implementation within military settings is addressed.

Nonlinear constitutive theory for turbine engine structural analysis

NASA Technical Reports Server (NTRS)

Thompson, R. L.

1982-01-01

A number of viscoplastic constitutive theories and a conventional constitutive theory are evaluated and compared in their ability to predict nonlinear stress-strain behavior in gas turbine engine components at elevated temperatures. Specific application of these theories is directed towards the structural analysis of combustor liners undergoing transient, cyclic, thermomechanical load histories. The combustor liner material considered in this study is Hastelloy X. The material constants for each of the theories (as a function of temperature) are obtained from existing, published experimental data. The viscoplastic theories and a conventional theory are incorporated into a general purpose, nonlinear, finite element computer program. Several numerical examples of combustor liner structural analysis using these theories are given to demonstrate their capabilities. Based on the numerical stress-strain results, the theories are evaluated and compared.

Use of an engineering data management system in the analysis of space shuttle orbiter tiles

NASA Technical Reports Server (NTRS)

Giles, G. L.; Vallas, M.

1981-01-01

The use of an engineering data management system to facilitate the extensive stress analyses of the space shuttle orbiter thermal protection system is demonstrated. The methods used to gather, organize, and store the data; to query data interactively; to generate graphic displays of the data; and to access, transform, and prepare the data for input to a stress analysis program are described. Information related to many separate tiles can be accessed individually from the data base which has a natural organization from an engineering viewpoint. The flexible user features of the system facilitate changes in data content and organization which occur during the development and refinement of the tile analysis procedure. Additionally, the query language supports retrieval of data to satisfy a variety of user-specified conditions.

Development of new materials for turbopump bearings

NASA Technical Reports Server (NTRS)

Maurer, R. E.; Pallini, R. A.

1985-01-01

The life requirement for the angular contact ball bearings in the Space Shuttle Main Engine (SSME) high pressure oxygen turbopump (HPOTP) is 7.5 hours. In actual operation, significantly shorter service life was experienced. The objective is to identify bearing materials and/or materials processing techniques offering signficant potential for extending HPOTP bearing performance life. Interactive thermomechanical analysis of the HPOTP bearing-shaft system was performed with the SHABERTH computer program. Bearing fatigue life, ball-race contact stress, heat generation rate, bulk ring temperatures and circumferential stress in the inner rings were quantified as functions of radial load, thrust load and ball-race contact friction. Criteria established from the output of this analysis are being used for material candidate selection.

A multi-purpose method for analysis of spur gear tooth loading

NASA Technical Reports Server (NTRS)

Kasuba, R.; Evans, J. W.; August, R.; Frater, J. L.

1981-01-01

A large digitized approach was developed for the static and dynamic load analysis of spur gearing. An iterative procedure was used to calculate directly the "variable-variable" gear mesh stiffness as a function of transmitted load, gear tooth profile errors, gear tooth deflections and gear hub torsional deformation, and position of contacting profile points. The developed approach can be used to analyze the loads, Hertz stresses, and PV for the normal and high contrast ratio gearing, presently the modeling is limited to the condition that for a given gear all teeth have identical spacing and profiles (with or without surface imperfections). Certain types of simulated sinusoidal profile errors and pitting can cause interruptions of the gear mesh stiffness function and, thus, increase the dynamic loads in spur gearing. In addition, a finite element stress and mesh subprogram was developed for future introduction into the main program for calculating the gear tooth bending stresses under dynamic loads.

Face Gear Drive with Spur Involute Pinion: Geometry, Generation by a Worm, Stress Analysis

NASA Technical Reports Server (NTRS)

Litvin, Faydor L.; Fuentes, Alfonso; Zanzi, Claudio; Pontiggia, Matteo; Handschuh, Robert F. (Technical Monitor)

2002-01-01

A face gear drive with a spur involute pinion is considered. The generation of the face gear is based on application of a grinding or cutting worm whereas the conventional method of generation is based on application of an involute shaper. An analytical approach is proposed for the determination of: (1) the worm thread surface; (2) avoidance of singularities of the worm thread surface, (air) dressing of the worm; and (3) determination of stresses of the face-gear drive. A computer program for simulation of meshing and contact of the pinion and face-gear has been developed. Correction of machine-tool settings is proposed for reduction of the shift of the bearing contact caused by misalignment. An automatic development of the model of five contacting teeth has been proposed for stress analysis. Numerical examples for illustration of the developed theory are provided.

Influence of implant inclination associated with mandibular class I removable partial denture.

PubMed

de Freitas Santos, Ciandrus Moraes; Pellizzer, Eduardo Piza; Verri, Fellippo Ramos; de Moraes, Sandra Lúcia Dantas; Falcón-Antenucci, Rosse Mary

2011-03-01

The aim of this study was to use two-dimensional finite element method to evaluate the displacement and stress distribution transmitted by a distal extension removable partial denture (DERPD) associated with an implant placed at different inclinations (0, 5, 15, and 30 degrees) in the second molar region of the edentulous mandible ridge. Six hemimandibular models were created: model A, only with the presence of the natural tooth 33; model B, similar to model A, with the presence of a conventional DERPD replacing the missing teeth; model C, similar to the previous model, with a straight implant (0 degrees) in the distal region of the ridge, under the denture base; model D, similar to model C, with the implant angled at 5 degrees in the mesial direction; model E, similar to model C, with the implant angled at 15 degrees in the mesial direction; and model F, similar to ME, with the implant angled at 30 degrees in the mesial direction. The models were created with the use of the AutoCAD 2000 program (Autodesk, Inc, San Rafael, CA) and processed for finite element analysis by the ANSYS 8.0 program (Swanson Analysis Systems, Houston, PA). The force applied was vertical of 50 N on each cusp tip. The results showed that the introduction of the RPD overloaded the supporting structures of the RPD and that the introduction of the implant helped to relieve the stresses of the mucosa alveolar, cortical bone, and trabecular bone. The best stress distribution occurred in model D with the implant angled at 5 degrees. The use of an implant as a support decreased the displacement of alveolar mucosa for all inclinations simulated. The stress distribution transmitted by the DERPD to the supporting structures was improved by the use of straight or slightly inclined implants. According to the displacement analysis and von Mises stress, it could be expected that straight or slightly inclined implants do not represent biomechanical risks to use.

Faecal glucocorticoid metabolites and body temperature in Australian merino ewes (Ovis aries) during summer artificial insemination (AI) program

PubMed Central

Sawyer, Gregory; Parisella, Simone

2018-01-01

Reproductive wastage is a key issue for sheep producers, both regionally and globally. The reproductive output of farm animals can be influenced by physiological and environmental factors. Rapid and reliable quantification of physiological stress can provide a useful tool for designing and testing on-farm management interventions to improve farm animal welfare and productivity. In this study, we quantified physiological stress non-invasively using faecal glucocorticoid metabolites-FGMs analysis and body temperature measurements of 15 superovulated donor merino ewes (Ovis aries) during participation in artificial insemination (AI) program conducted during 2015/2016 Australian summer. We hypothesized that low percentage transferable embryos in donor merino ewes will be associated positively with higher body temperature and/or higher FGMs in these ewes. Temperature humidity index (THI) was calculated and found within high thermal stress range during the two AI trials. Overall, results showed none of the factors (ewe ID, AI trial no., THI or FGMs) were significant for reduced percentage transferrable embryos, except ewe body temperature was highly significant (p = 0.014). Within AI trial comparisons showed significant positive associations between higher FGMs and body temperature with reduced transferrable embryos. These results suggest that Australian merino ewes participating in summer AI trials can experience physiological stress. Prolonged activation of the stress endocrine response and high body temperature (e.g. ensued from heat stress) could impact on ewe reproductive output. Therefore, future research should apply minimally invasive physiological tools to gather baseline information on physiological stress in merino sheep to enable the development of new farm-friendly methods of managing stress. PMID:29381759

Faecal glucocorticoid metabolites and body temperature in Australian merino ewes (Ovis aries) during summer artificial insemination (AI) program.

PubMed

Narayan, Edward; Sawyer, Gregory; Parisella, Simone

2018-01-01

Reproductive wastage is a key issue for sheep producers, both regionally and globally. The reproductive output of farm animals can be influenced by physiological and environmental factors. Rapid and reliable quantification of physiological stress can provide a useful tool for designing and testing on-farm management interventions to improve farm animal welfare and productivity. In this study, we quantified physiological stress non-invasively using faecal glucocorticoid metabolites-FGMs analysis and body temperature measurements of 15 superovulated donor merino ewes (Ovis aries) during participation in artificial insemination (AI) program conducted during 2015/2016 Australian summer. We hypothesized that low percentage transferable embryos in donor merino ewes will be associated positively with higher body temperature and/or higher FGMs in these ewes. Temperature humidity index (THI) was calculated and found within high thermal stress range during the two AI trials. Overall, results showed none of the factors (ewe ID, AI trial no., THI or FGMs) were significant for reduced percentage transferrable embryos, except ewe body temperature was highly significant (p = 0.014). Within AI trial comparisons showed significant positive associations between higher FGMs and body temperature with reduced transferrable embryos. These results suggest that Australian merino ewes participating in summer AI trials can experience physiological stress. Prolonged activation of the stress endocrine response and high body temperature (e.g. ensued from heat stress) could impact on ewe reproductive output. Therefore, future research should apply minimally invasive physiological tools to gather baseline information on physiological stress in merino sheep to enable the development of new farm-friendly methods of managing stress.

System-Level Heat Transfer Analysis, Thermal- Mechanical Cyclic Stress Analysis, and Environmental Fatigue Modeling of a Two-Loop Pressurized Water Reactor. A Preliminary Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohanty, Subhasish; Soppet, William; Majumdar, Saurin

This report provides an update on an assessment of environmentally assisted fatigue for light water reactor components under extended service conditions. This report is a deliverable in April 2015 under the work package for environmentally assisted fatigue under DOE's Light Water Reactor Sustainability program. In this report, updates are discussed related to a system level preliminary finite element model of a two-loop pressurized water reactor (PWR). Based on this model, system-level heat transfer analysis and subsequent thermal-mechanical stress analysis were performed for typical design-basis thermal-mechanical fatigue cycles. The in-air fatigue lives of components, such as the hot and cold legs,more » were estimated on the basis of stress analysis results, ASME in-air fatigue life estimation criteria, and fatigue design curves. Furthermore, environmental correction factors and associated PWR environment fatigue lives for the hot and cold legs were estimated by using estimated stress and strain histories and the approach described in NUREG-6909. The discussed models and results are very preliminary. Further advancement of the discussed model is required for more accurate life prediction of reactor components. This report only presents the work related to finite element modelling activities. However, in between multiple tensile and fatigue tests were conducted. The related experimental results will be presented in the year-end report.« less

Stress Be Not Proud: The Myth of Burnout.

ERIC Educational Resources Information Center

DeMoulin, Donald F.

1991-01-01

Analysis of data from 827 professional educators, using the Career Awareness Index and the Instrument Summary Assessment Program, indicates that "burnout" may be an inappropriate descriptor of low to moderate levels of self-efficacy and personal productivity. Professional development activities should be specifically designed to match individual…

Solar central receiver hybrid power system, phase 1. Volume 3: Appendices

NASA Astrophysics Data System (ADS)

1979-09-01

Parametric salt piping data, sample heat exchanger calculations, and salt/materials compatibility evaluations are presented. Data lists that include the heliostat field coordinates, the STEAEC program input data, the hybrid receiver design drawings and models, and the piping stress analysis are also presented.

Parenting Stress through the Lens of Different Clinical Groups: a Systematic Review & Meta-Analysis

PubMed Central

Mendez, Lucybel; Graziano, Paulo A.; Bagner, Daniel M.

2017-01-01

Research has demonstrated an association between parenting stress and child behavior problems, and suggested levels of parenting stress are higher among parents of children at risk for behavior problems, such as those with autism and developmental delay (ASD/DD). The goal of the present study was to conduct a systematic review of parenting stress and child behavior problems among different clinical groups (i.e., ASD/DD, chronic illness, with or at-risk for behavioral and/or mood disorders). We also examined demographic and methodological variables as moderators and differences in overall levels of parenting stress between the clinical groups. This systematic review documents a link between parenting stress and child behavior problems with an emphasis on externalizing behavior. One-hundred thirty-three studies were included for quantitative analysis. Parenting stress was more strongly related to child externalizing (weighted ES r = 0.57, d = 1.39) than internalizing (weighted ES r = 0.37, d = 0.79) problems. Moderation analyses indicated that the association between parenting stress and behavior problems was stronger among studies which had mostly male and clinic-recruited samples. Overall, parenting stress levels were higher for parents of children with ASD/DD compared to parents of children from other clinical groups. Findings document the association between parenting stress and child behavior problems and highlight the importance of assessing parenting stress as part of routine care and throughout behavioral intervention programs, especially for groups of children at high risk for behavior problems, such as children with ASD/DD, in order to identify support for both the parent(s) and child. PMID:28555335

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wooten, C.T.

The report represents a comprehensive analysis of the testing and design of the completion and hydraulic fracturing treatment on the Lower and Middle Intervals of the Canyon Sands in the Phillips Petroleum Company Ward C No. 11 Well. Presented is a reservoir description; in-situ stress measurements; and the design, execution and evaluation of the mini-frac and propped fracturing treatments. As part of the West Texas Canyon Sands GRI cooperative well program, some of the data and results obtained on another Canyon Sands co-op well are included with the results from the Ward C-11. In-situ stress measurements are coupled with themore » results from the LSDS log stress to obtain a calibrated stress profile. These data, along with mini-frac data are used to analyze hydraulic fracturing in the reservoir.« less

Methods for analysis of cracks in three-dimensional solids

NASA Technical Reports Server (NTRS)

Raju, I. S.; Newman, J. C., Jr.

1984-01-01

Analytical and numerical methods evaluating the stress-intensity factors for three-dimensional cracks in solids are presented, with reference to fatigue failure in aerospace structures. The exact solutions for embedded elliptical and circular cracks in infinite solids, and the approximate methods, including the finite-element, the boundary-integral equation, the line-spring models, and the mixed methods are discussed. Among the mixed methods, the superposition of analytical and finite element methods, the stress-difference, the discretization-error, the alternating, and the finite element-alternating methods are reviewed. Comparison of the stress-intensity factor solutions for some three-dimensional crack configurations showed good agreement. Thus, the choice of a particular method in evaluating the stress-intensity factor is limited only to the availability of resources and computer programs.

Cherokee Self-Reliance and Word-Use in Stories of Stress

PubMed Central

Lowe, John; Riggs, Cheryl; Henson, Jim; Liehr, Patricia

2009-01-01

This study examined the relationship between Cherokee self-reliance and related values expressed through word-use in stories of stress written by Cherokee adolescents. The overall aim of this pilot study was to test the feasibility of using cultural appropriate measurements for a larger intervention study of substance abuse prevention in Cherokee adolescents. A sample of 50 Cherokee adolescent senior high school students completed the Cherokee Self-Reliance Questionnaire and wrote their story of stress. The Linguistic Inquiry and Word Count (LIWC) program, a word-based computerized text analysis software, was used to report the percentage of words used in the selected word categories in relation to all the words used by a participant. Word-use from the stories of stress were found to correlate with Cherokee self-reliance. PMID:20669397

Cherokee self-reliance and word-use in stories of stress.

PubMed

Lowe, John; Riggs, Cheryl; Henson, Jim; Elder, Tribal; Liehr, Patricia

2009-01-01

This study examined the relationship between Cherokee self-reliance and related values expressed through word-use in stories of stress written by Cherokee adolescents. The overall aim of this pilot study was to test the feasibility of using cultural appropriate measurements for a larger intervention study of substance abuse prevention in Cherokee adolescents. A sample of 50 Cherokee adolescent senior high school students completed the Cherokee Self-Reliance Questionnaire and wrote their story of stress. The Linguistic Inquiry and Word Count (LIWC) program, a word-based computerized text analysis software, was used to report the percentage of words used in the selected word categories in relation to all the words used by a participant. Word-use from the stories of stress were found to correlate with Cherokee self-reliance.

Study of wavefront error and polarization of a side mounted infrared window

NASA Astrophysics Data System (ADS)

Liu, Jiaguo; Li, Lin; Hu, Xinqi; Yu, Xin

2008-03-01

The wavefront error and polarization of a side mounted infrared window made of ZnS are studied. The Infrared windows suffer from temperature gradient and stress during their launch process. Generally, the gradient in temperature changes the refractive index of the material whereas stress produces deformation and birefringence. In this paper, a thermal finite element analysis (FEA) of an IR window is presented. For this purpose, we employed an FEA program Ansys to obtain the time-varying temperature field. The deformation and stress of the window are derived from a structural FEA with the aerodynamic force and the temperature field previously obtained as being the loads. The deformation, temperature field, stress field, ray tracing and Jones Calculus are used to calculate the wavefront error and the change of polarization state.

Evaluation of a Training Program to Reduce Stressful Trunk Postures in the Nursing Professions: A Pilot Study.

PubMed

Kozak, Agnessa; Freitag, Sonja; Nienhaus, Albert

2017-01-01

The aim of this pilot study was to evaluate metrologically the effectiveness of a training program on the reduction of stressful trunk postures in geriatric nursing professions. A training program, consisting of instruction on body postures in nursing, practical ergonomic work methods at the bedside or in the bathroom, reorganization of work equipment, and physical exercises, was conducted in 12 wards of 6 nursing homes in Germany. The Computer-Assisted Recording and Long-Term Analysis of Musculoskeletal Loads (CUELA) measurement system was used to evaluate all movements and trunk postures adopted during work before and 6 months after the training program. In total, 23 shifts were measured. All measurements were supported by video recordings. A specific software program (WIDAAN 2.75) was used to synchronize the measurement data and video footage. The median proportion of time spent in sagittal inclinations at an angle of >20° was significantly reduced (by 29%) 6 months after the intervention [from 35.4% interquartile range (27.6-43.1) to 25.3% (20.7-34.1); P < 0.001]. Very pronounced inclinations exceeding 60° [2.5% (1.1-4.6) to 1.0% (0.8-1.7); P = 0.002] and static inclinations of over 20° for >4 s [4.4% (3.0-6.7) to 3.6% (2.5-4.5); P < 0.001] were significantly reduced, by 60% and 22%, respectively. Video analysis showed that in 49% of care situations, ergonomic measures were implemented properly, either at the bedside or in the bathroom. Stressful trunk postures could be significantly reduced by raising awareness of the physical strains that frequently occur during a shift, by changes in work practices and by redesigning the work environment. Workplace interventions aimed at preventing or reducing low back pain in nursing personnel would probably benefit from sensitizing employees to their postures during work. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Students perceived stress in academic programs: consequences for its management.

PubMed

Neveu, D; Doron, J; Visier, L; Boiché, J; Trouillet, R; Dujols, P; Ninot, G

2012-08-01

Academic stress contributes to the deterioration of the students' quality of life. Psychological determinants involved in the stress process, trait anxiety and coping, have been neglected when assessing the role of academic programs in stress. This study aimed at determining whether academic programs are associated with a high level of perceived stress above and beyond potential personal and environmental risk factors, as well as coping strategies. A cross-sectional survey was conducted in 2009 among third-year medical (total n=170, participants 88%), dental (n=63, 94%), psychology (n=331, 61%) and sports sciences (n=312, 55%) students in Montpellier (France). The stress level experienced during the last 2months, trait anxiety and coping strategies were appraised. Substance use, psychological care, and stress triggers were also collected using a self-administered questionnaire. Compared with medicine and after adjusting for gender and age, only the sports program was associated with a lower perceived stress risk: adjusted odds ratio: 0.54 [95% Confidence interval: 0.30; 0.99]. Substantial reductions in perceived stress risks were observed in science students after additional adjustments for non-academic stress triggers, substance use, psychological care (adjusted odds ratio: 0.20 [95% Confidence interval: 0.09; 0.41]), and also for trait anxiety and coping strategies (adjusted odds ratio: 0.23 [95% Confidence interval: 0.10; 0.54]). Compared with medicine and after these additional adjustments, psychology had a significantly lower perceived stress risk (0.34 [0.18; 0.64]; 0.40 [0.19; 0.86], respectively), dentistry had a similar risk (0.82 [0.35; 1.91]; 0.53 [0.20; 1.43], respectively). Sports and psychology programs had a lower perceived stress risk compared with medicine. Personal and environmental risk factors and coping strategies modified the association between academic program and perceived stress. Developing efficient coping strategies in students and improving academic environment could contribute to prevent the potential deleterious consequences of stress. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

The Relationship between Racial Identity and Acculturative Stress among African American Students in Counselor Training Programs

ERIC Educational Resources Information Center

Stewart, Tiffany A.; Owens, Delila; Queener, John E.; Reynolds, Cynthia A.

2014-01-01

In this study, we examined racial identity and acculturative stress among 116 African American counselor education graduate students in Council for the Accreditation of Counseling and Related Educational Programs (CACREP) accredited programs. Results indicated that racial identity and acculturative stress remain viable variables to take into…

Counselors and Workplace Wellness Programs: A Conceptual Model

ERIC Educational Resources Information Center

Saliba, Yvette; Barden, Sejal

2017-01-01

Occupational stress is a top source of stress for over 65% of Americans due to extended hours in the workplace. Recent changes in health care have encouraged employers to build workplace wellness programs to improve physical and mental health for employees to mitigate the effects of occupational stress. Wellness programs focus on either disease…

Slicken 1.0: Program for calculating the orientation of shear on reactivated faults

NASA Astrophysics Data System (ADS)

Xu, Hong; Xu, Shunshan; Nieto-Samaniego, Ángel F.; Alaniz-Álvarez, Susana A.

2017-07-01

The slip vector on a fault is an important parameter in the study of the movement history of a fault and its faulting mechanism. Although there exist many graphical programs to represent the shear stress (or slickenline) orientations on faults, programs to quantitatively calculate the orientation of fault slip based on a given stress field are scarce. In consequence, we develop Slicken 1.0, a software to rapidly calculate the orientation of maximum shear stress on any fault plane. For this direct method of calculating the resolved shear stress on a planar surface, the input data are the unit vector normal to the involved plane, the unit vectors of the three principal stress axes, and the stress ratio. The advantage of this program is that the vertical or horizontal principal stresses are not necessarily required. Due to its nimble design using Java SE 8.0, it runs on most operating systems with the corresponding Java VM. The software program will be practical for geoscience students, geologists and engineers and will help resolve a deficiency in field geology, and structural and engineering geology.

How Do You #relax When You're #stressed? A Content Analysis and Infodemiology Study of Stress-Related Tweets.

PubMed

Doan, Son; Ritchart, Amanda; Perry, Nicholas; Chaparro, Juan D; Conway, Mike

2017-06-13

Stress is a contributing factor to many major health problems in the United States, such as heart disease, depression, and autoimmune diseases. Relaxation is often recommended in mental health treatment as a frontline strategy to reduce stress, thereby improving health conditions. Twitter is a microblog platform that allows users to post their own personal messages (tweets), including their expressions about feelings and actions related to stress and stress management (eg, relaxing). While Twitter is increasingly used as a source of data for understanding mental health from a population perspective, the specific issue of stress-as manifested on Twitter-has not yet been the focus of any systematic study. The objective of our study was to understand how people express their feelings of stress and relaxation through Twitter messages. In addition, we aimed at investigating automated natural language processing methods to (1) classify stress versus nonstress and relaxation versus nonrelaxation tweets, and (2) identify first-hand experience-that is, who is the experiencer-in stress and relaxation tweets. We first performed a qualitative content analysis of 1326 and 781 tweets containing the keywords "stress" and "relax," respectively. We then investigated the use of machine learning algorithms-in particular naive Bayes and support vector machines-to automatically classify tweets as stress versus nonstress and relaxation versus nonrelaxation. Finally, we applied these classifiers to sample datasets drawn from 4 cities in the United States (Los Angeles, New York, San Diego, and San Francisco) obtained from Twitter's streaming application programming interface, with the goal of evaluating the extent of any correlation between our automatic classification of tweets and results from public stress surveys. Content analysis showed that the most frequent topic of stress tweets was education, followed by work and social relationships. The most frequent topic of relaxation tweets was rest & vacation, followed by nature and water. When we applied the classifiers to the cities dataset, the proportion of stress tweets in New York and San Diego was substantially higher than that in Los Angeles and San Francisco. In addition, we found that characteristic expressions of stress and relaxation varied for each city based on its geolocation. This content analysis and infodemiology study revealed that Twitter, when used in conjunction with natural language processing techniques, is a useful data source for understanding stress and stress management strategies, and can potentially supplement infrequently collected survey-based stress data. ©Son Doan, Amanda Ritchart, Nicholas Perry, Juan D Chaparro, Mike Conway. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 13.06.2017.

Stress, Coping, and Adult Education.

ERIC Educational Resources Information Center

McClary, Sybil A.

1990-01-01

Adult educators can help students cope with stress by (1) designing programs that are responsive to stress factors; (2) including information on stress effects in orientation sessions; (3) developing individualized programs of study; (4) integrating education into students' work and other life roles; (5) providing personal attention, advising, and…

Sources of Water to Wells for Transient Cyclic Systems

USGS Publications Warehouse

Reilly, T.E.; Pollock, D.W.

1996-01-01

Many state agencies are currently (1995) developing wellhead protection programs. The thrust of some of these programs is to protect water supplies by determining the areas contributing recharge to water-supply wells and by specifying regulations to minimize the opportunity for contamination of the recharge water by activities at the land surface. The area contributing recharge to a discharging well is the surface area at the water table through which the water flowing to the well entered the ground-water system. In the analyses of ground-water flow systems, steady-state average conditions are commonly used to simplify the problem and make a solution tractable. However, recharge is usually cyclic in nature, with seasonal cycles and longer term climatic cycles. The effect of these cyclic stresses on the area contributing recharge to wells is quantitatively analyzed for a hypothetical alluvial valley aquifer system that is representative of a large class of ground-water systems that are extensively developed for water supply. The analysis shows that, in many cases, these cyclic changes in the recharge rates do not significantly affect the location and size of the areas contributing recharge to wells. The ratio of the mean travel time to the length of the cyclic stress period appears to be an indicator of whether the transient effects of the cyclic stress must be explicitly represented in the analysis of contributing areas to wells. For the cases examined, if the ratio of the mean travel time to the period of the cyclic stress was much greater than one, then the transient area contributing recharge to wells was similar to the area calculated using an average steady-state condition. However, cyclic stresses on systems with ratios less than one do have an effect on the location and size of the areas contributing recharge to wells.

Transcriptional regulation of the CRK/DUF26 group of Receptor-like protein kinases by ozone and plant hormones in Arabidopsis

PubMed Central

2010-01-01

Background Plant Receptor-like/Pelle kinases (RLK) are a group of conserved signalling components that regulate developmental programs and responses to biotic and abiotic stresses. One of the largest RLK groups is formed by the Domain of Unknown Function 26 (DUF26) RLKs, also called Cysteine-rich Receptor-like Kinases (CRKs), which have been suggested to play important roles in the regulation of pathogen defence and programmed cell death. Despite the vast number of RLKs present in plants, however, only a few of them have been functionally characterized. Results We examined the transcriptional regulation of all Arabidopsis CRKs by ozone (O3), high light and pathogen/elicitor treatment - conditions known to induce the production of reactive oxygen species (ROS) in various subcellular compartments. Several CRKs were transcriptionally induced by exposure to O3 but not by light stress. O3 induces an extracellular oxidative burst, whilst light stress leads to ROS production in chloroplasts. Analysis of publicly available microarray data revealed that the transcriptional responses of the CRKs to O3 were very similar to responses to microbes or pathogen-associated molecular patterns (PAMPs). Several mutants altered in hormone biosynthesis or signalling showed changes in basal and O3-induced transcriptional responses. Conclusions Combining expression analysis from multiple treatments with mutants altered in hormone biosynthesis or signalling suggest a model in which O3 and salicylic acid (SA) activate separate signaling pathways that exhibit negative crosstalk. Although O3 is classified as an abiotic stress to plants, transcriptional profiling of CRKs showed strong similarities between the O3 and biotic stress responses. PMID:20500828

A Japanese Stress Check Program screening tool predicts employee long-term sickness absence: a prospective study.

PubMed

Tsutsumi, Akizumi; Shimazu, Akihito; Eguchi, Hisashi; Inoue, Akiomi; Kawakami, Norito

2018-01-25

On December 1, 2015, the Japanese government launched the Stress Check Program, a new occupational health policy to screen employees for high psychosocial stress in the workplace. As only weak evidence exists for the effectiveness of the program, we sought to estimate the risk of stress-associated long-term sickness absence as defined in the program manual. Participants were 7356 male and 7362 female employees in a financial service company who completed the Brief Job Stress Questionnaire (BJSQ). We followed them for 1 year and used company records to identify employees with sickness absence of 1 month or longer. We defined high-risk employees using the BJSQ and criteria recommended by the program manual. We used the Cox proportional regression model to evaluate the prospective association between stress and long-term sickness absence. During the follow-up period, we identified 34 male and 35 female employees who took long-term sickness absence. After adjustment for age, length of service, job type, position, and post-examination interview, hazard ratios (95% confidence intervals) for incident long-term sickness absence in high-stress employees were 6.59 (3.04-14.25) for men and 2.77 (1.32-5.83) for women. The corresponding population attributable risks for high stress were 23.8% (10.3-42.6) for men and 21.0% (4.6-42.1) for women. During the 1-year follow-up, employees identified as high stress (as defined by the Stress Check Program manual) had significantly elevated risks for long-term sickness absence.

Psychological and social factors affecting Internet searches on suicide in Korea: a big data analysis of Google search trends.

PubMed

Song, Tae Min; Song, Juyoung; An, Ji-Young; Hayman, Laura L; Woo, Jong-Min

2014-01-01

The average mortality rate for death by suicide among OECD countries is 12.8 per 100000, and 33.5 for Korea. The present study analyzed big data extracted from Google to identify factors related to searches on suicide in Korea. Google search trends for the search words of suicide, stress, exercise, and drinking were obtained for 2004-2010. Analyzing data by month, the relationship between the actual number of suicides and search words per year was examined using multi-level models. Both suicide rates and Google searches on suicide in Korea increased since 2007. An unconditional slope model indicated stress and suicide-related searches were positively related. A conditional model showed that factors associated with suicide by year directly affected suicide-related searches. The interaction between stress-related searches and the actual number of suicides was significant. A positive relationship between stress- and suicide-related searches further confirmed that stress affects suicide. Taken together and viewed in context of the big data analysis, our results point to the need for a tailored prevention program. Real-time big data can be of use in indicating increases in suicidality when search words such as stress and suicide generate greater numbers of hits on portals and social network sites.

The revised Stress Measurement of Female Marriage Immigrants in Korea: Evaluation of the psychometric properties.

PubMed

Park, Min Hee; Yang, Sook Ja; Chee, Yeon Kyung

2016-01-01

The twenty-one item Stress Measurement of Female Marriage Immigrants (SMFMI) was developed to assess stress of female marriage immigrants in Korea. This study reports the psychometric properties of a revised SMFMI (SMFMI-R) for application with female marriage immigrants to Korea who were raising children. Participants were 190 female marriage immigrants from China, Vietnam, the Philippines, and other Asian countries, who were recruited using convenience sampling between November 2013 and December 2013. Survey questionnaires were translated into study participants' native languages (Chinese, Vietnamese, and English). Principal component analysis yielded nineteen items in four factors (family, parenting, cultural, and economic stress), explaining 63.5% of the variance, which was slightly better than the original scale. Confirmatory factor analysis indicated adequate fit for the four-factor model. Based on classic test theory and item response theory, strong support was provided for item discrimination, item difficulty, and internal consistency (Cronbach's alpha = 0.923). SMFMI-R scores were negatively associated with Korean proficiency and subjective economic status. The SMFMI-R is a valid, reliable, and comprehensive measure of stress for female marriage immigrants and can provide useful information to develop intervention programs for those who may be at risk for emotional stress.

Impacts of Climate Variability on the Spatio-temporal Characteristics of Water Stress in Korea

NASA Astrophysics Data System (ADS)

Kim, Soojun; Devineni, Naresh; Lall, Upmanu; Kim, Hung Soo

2017-04-01

This study intended to evaluate water stress quantitatively targeted at the Korean Peninsula and to analyze the spatial and temporal characteristics of its occurrence. First, the severity and multiyear influence of water stress were analyzed by realizing water balance based on water supply and demand and by calculating the normalized deficit index (NDI) and the normalized deficit cumulated (NDC) for 113 small basins in the Korean Peninsula. Next, a change in the periodic characteristics of water stress was analyzed using wavelet transform of the NDI by small basins and 3 bands of periods of 1 year, 2-4 years, and 4-8 years were separated. Through an analysis of the empirical orthogonal function (EOF) on each band, it was found that water stress occurring in the Korean Peninsula has the characteristics of spatial distribution that it is extended from the south coast to the northern area and inland as its period gets longer. An analysis of the band with a period of 2-8 years for water stress showed that it has a relationship with El Niño-Southern Oscillation (ENSO). Acknowledgment This research was supported by a grant (14AWMP-B082564-01) from Advanced Water Management Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government.

Computer-aided roll pass design in rolling of airfoil shapes

NASA Technical Reports Server (NTRS)

Akgerman, N.; Lahoti, G. D.; Altan, T.

1980-01-01

This paper describes two computer-aided design (CAD) programs developed for modeling the shape rolling process for airfoil sections. The first program, SHPROL, uses a modular upper-bound method of analysis and predicts the lateral spread, elongation, and roll torque. The second program, ROLPAS, predicts the stresses, roll separating force, the roll torque and the details of metal flow by simulating the rolling process, using the slab method of analysis. ROLPAS is an interactive program; it offers graphic display capabilities and allows the user to interact with the computer via a keyboard, CRT, and a light pen. The accuracy of the computerized models was evaluated by (a) rolling a selected airfoil shape at room temperature from 1018 steel and isothermally at high temperature from Ti-6Al-4V, and (b) comparing the experimental results with computer predictions. The comparisons indicated that the CAD systems, described here, are useful for practical engineering purposes and can be utilized in roll pass design and analysis for airfoil and similar shapes.

Flow/Damage Surfaces for Fiber-Reinforced Metals Having Different Periodic Microstructures

NASA Technical Reports Server (NTRS)

Lissenden, Cliff J.; Arnold, Steven M.; Iyer, Saiganesh K.

1998-01-01

Flow/damage surfaces can be defined in terms of stress, inelastic strain rate, and internal variables using a thermodynamics framework. A macroscale definition relevant to thermodynamics and usable in an experimental program is employed to map out surfaces of constant inelastic power in various stress planes. The inelastic flow of a model silicon carbide/ titanium composite system having rectangular, hexagonal, and square diagonal fiber packing arrays subjected to biaxial stresses is quantified by flow/damage surfaces that are determined numerically from micromechanics, using both finite element analysis and the generalized method of cells. Residual stresses from processing are explicitly included and damage in the form of fiber-matrix debonding under transverse tensile and/or shear loading is represented by a simple interface model. The influence of microstructural architecture is largest whenever fiber-matrix debonding is not an issue; for example in the presence of transverse compressive stresses. Additionally, as the fiber volume fraction increases, so does the effect of microstructural architecture. With regard to the micromechanics analysis, the overall inelastic flow predicted by the generalized method of cells is in excellent agreement with that predicted using a large number of displacement-based finite elements.

Flow/Damage Surfaces for Fiber-Reinforced Metals having Different Periodic Microstructures

NASA Technical Reports Server (NTRS)

Lissenden, Cliff J.; Arnold, Steven M.; Iyer, Saiganesh K.

1998-01-01

Flow/damage surfaces can be defined in terms of stress, inelastic strain rate, and internal variables using a thermodynamics framework. A macroscale definition relevant to thermodynamics and usable in an experimental program is employed to map out surfaces of constant inelastic power in various stress planes. The inelastic flow of a model silicon carbide/ titanium composite system having rectangular, hexagonal, and square diagonal fiber packing, arrays subjected to biaxial stresses is quantified by flow/damage surfaces that are determined numerically from micromechanics. using both finite element analysis and the generalized method of cells. Residual stresses from processing are explicitly included and damage in the form of fiber-matrix debonding under transverse tensile and/or shear loading is represented by a simple interface model. The influence of microstructural architecture is largest whenever fiber-matrix debonding is not an issue, for example in the presence of transverse compressive stresses. Additionally, as the fiber volume fraction increases, so does the effect of microstructural architecture. With regard to the micromechanics analysis, the overall inelastic flow predicted by the generalized method of cells is in excellent agreement with that predicted using a large number of displacement-based finite elements.

Numerical analysis of multi-level versus short instrumentation for the treatment of thoracolumbar fractures.

PubMed

Hübner, André Rafael; Gasparin, Daniel; de Meira Junior, Agenor Dias; Israel, Charles Leonardo; Dambrós, Jean Marcel; Ribeiro, Marcelo; de Freitas Spinelli, Leandro

2015-07-01

The research analyses the strength of metallic implants in posterior spinal instrumentation for the treatment of thoracolumbar fractures, considering extended and short fixation techniques on the immediate post-surgical load. Considering that short fixation may bring the advantage of a less invasive surgical procedure to the patient and may also result in lower costs, this evaluation becomes necessary. Three-dimensional modelling of the thoracolumbar spine was initially performed. CT images were captured and converted for analysis with the ANSYS program. Both treatment techniques were analysed for stresses, and strains generated in the immediate postoperative period, when the fracture is still not healed. The maximum stress obtained for long fixation by the theory of Von Mises was 230 MPa, and it was located in the rod area next to the L2 vertebra. The maximum stress obtained for short fixation was 274.24 MPa, and it was located in the pedicle screw on the T12 vertebra. There were no significant differences between the two techniques, since the observed stresses are well below the flow stress of the material, ensuring good safety factor (ranging from 3.5 to 4.1).

Fatigue and fracture assessment of cracks in steel elements using acoustic emission

NASA Astrophysics Data System (ADS)

Nemati, Navid; Metrovich, Brian; Nanni, Antonio

2011-04-01

Single edge notches provide a very well defined load and fatigue crack size and shape environment for estimation of the stress intensity factor K, which is not found in welded elements. ASTM SE(T) specimens do not appear to provide ideal boundary conditions for proper recording of acoustic wave propagation and crack growth behavior observed in steel bridges, but do provide standard fatigue crack growth rate data. A modified versions of the SE(T) specimen has been examined to provide small scale specimens with improved acoustic emission(AE) characteristics while still maintaining accuracy of fatigue crack growth rate (da/dN) versus stress intensity factor (ΔK). The specimens intend to represent a steel beam flange subjected to pure tension, with a surface crack growing transverse to a uniform stress field. Fatigue test is conducted at low R ratio. Analytical and numerical studies of stress intensity factor are developed for single edge notch test specimens consistent with the experimental program. ABAQUS finite element software is utilized for stress analysis of crack tips. Analytical, experimental and numerical analysis were compared to assess the abilities of AE to capture a growing crack.

Trait Anxiety Reductions in a Substance Abuse Population Trained in Stress Management.

ERIC Educational Resources Information Center

Charlesworth, Edward A.; Dempsey, George

1982-01-01

Investigated a stress management training program for 11 hospitalized drug-abusing patients, compared to a control group in different psychotherapy programs. Results indicated that the stress management treatment group produced significant decreases in trait anxiety. Subjects used the stress management techniques to overcome insomnia, anger, and…

Adult Literacy Education Program Administrators' Perceptions of Occupational Stress and Coping Mechanisms

ERIC Educational Resources Information Center

Engelmann, Stephanie

2014-01-01

Job performance may be adversely affected by stress. Job stress is a primary contributor to serious physical and emotional health consequences. This quantitative study examined adult literacy program administrator perceptions of occupational stress and coping mechanisms related to job satisfaction, job efficacy, career longevity, and overall…

A Systematic Review of Stress-Management Programs for Medical Students

ERIC Educational Resources Information Center

Shiralkar, Malan T.; Harris, Toi B.; Eddins-Folensbee, Florence F.; Coverdale, John H.

2013-01-01

Objective: Because medical students experience a considerable amount of stress during training, academic leaders have recognized the importance of developing stress-management programs for medical students. The authors set out to identify all controlled trials of stress-management interventions and determine the efficacy of those interventions.…

Individual Stress Management Coursework in Canadian Teacher Preparation Programs

ERIC Educational Resources Information Center

Harris, Gregory E.

2011-01-01

Teacher stress is a significant issue facing the teaching profession. The current paper explores individual stress management as a viable option to address stress in this profession. Specifically, Canadian teacher education programs are examined to identify the prevalence of pre-service teacher education courses focused on individual stress…

Internet-based information and support program for parents of children with burns: A randomized controlled trial.

PubMed

Sveen, Josefin; Andersson, Gerhard; Buhrman, Bo; Sjöberg, Folke; Willebrand, Mimmie

2017-05-01

The aim of the study was to evaluate the feasibility and effects of an internet-based information and self-help program with therapist contact for parents of children and adolescents with burns. The program aimed to reduce parents' symptoms of general and posttraumatic stress. Participants were parents of children treated for burns between 2009-2013 at either of the two specialized Swedish Burn centers. Sixty-two parents were included in a two-armed, randomized controlled trial with a six-week intervention group and a wait-list control group, including a pre and post-assessment, as well as a 3 and 12-month follow-up. The intervention contained psychoeducation, exercises and homework assignments, and the intervention group received weekly written feedback from a therapist. The main outcome was stress (post-traumatic stress, general stress and parental stress). The program had a beneficial effect on posttraumatic stress in the short term, but did not affect general stress or parental stress. The parents rated the program as being informative and meaningful, but some of them thought it was time-consuming. The program has the potential to support parents of children with burns. The intervention is easily accessible, cost-effective and could be implemented in burn care rehabilitation. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Effects of a brief worksite stress management program on coping skills, psychological distress and physical complaints: a controlled trial.

PubMed

Shimazu, Akihito; Umanodan, Rino; Schaufeli, Wilmar B

2006-10-01

To examine the effects of single-session, small-group stress management program on knowledge about stress, coping skills, and psychological and physical distress. A total of 300 employees from a company in western Japan were invited to participate in the study. Those who consented to enter the study were assigned to an intervention (n=149) or waiting list control group (n=151). Participants in the intervention group received a small-group stress management program. The program was primarily aimed at increasing knowledge about stress and improving coping skills. To investigate the intervention effect, change scores in outcome variables were calculated by subtracting the scores at pre-intervention from those at post-intervention (8 weeks after the pre-intervention survey). Next, the difference in the scores between groups was examined using analyses of covariance (ANCOVA) with the pre-intervention score as the covariate. Favorable intervention effects were found on knowledge about stress and on coping skills (P<0.001 and P=0.012, respectively) and adverse effects on psychological distress (P=0.022). However, this adverse effect on psychological distress did not exist among those who initially perceived higher levels of job control. The single-session stress management program was effective on improving knowledge about stress, and coping skills, where job control moderated the effect of the program on psychological distress.

Weld residual stresses and plastic deformation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rybicki, E.; Shiratori, M.

1989-01-01

Residual stresses due to welding can play a primary role in the performance of piping systems and pressure vessels. The stresses are high, in the range of the yield stress of the material, and can influence the fatigue and fracture behavior as well as component service life. Thus, it is important to have an understanding of weld residual stresses. The papers in this section address the important topic of residual stresses and failure analysis. The paper by Boyles reviews computer simulation in the prediction and analysis of fatigue, fracture, and creep of welded structures. The growing use of expert systemsmore » for these purposes is also covered. Karisson, et al, determine the deformations and stresses during the butt-welding of a pipe. The determination of residual deformations and stresses is also presented. Oddy, Goldak, and McDill propose a method to incorporate transformation plasticity in a finite element program. A three-dimensional analysis of a short longitudinal pipe weld in a typical pressure vessel steel is presented. Chaaban, Morin, Ma, and Bazergui study the influence of ligament thickness, strain hardening, expansion sequence, and level of applied expansion pressure on the interference fit in a model of a tube-to-tubesheet joint in a heat exchanger. This section contains papers dealing with models for plastic deformation. Imatani, Teraura, and Inoue formulate a viscoplastic constitutive model based on an anisotropic yield criterion. Comparisons with experimental results obtained using thin walled tubular specimens made from SUS 304 stainless steel show that the present yield criterion adequately accounts for prior deformation history. Niitsu, Horiguchi, and Ikegami investigate the plastic behavior of S25C mild steel tubular specimens subjected to combined axial and torsional loading at both constant and variable temperatures.« less

Computer program for stress, stability, and vibration of complex branched shells of revolution: BOSOR 4

NASA Technical Reports Server (NTRS)

Bushnell, D.

1974-01-01

Code is easy to use yet is general with respect to: (a) type of analysis to be performed; (b) geometry of shell meridian; (c) type of wall construction; (d) type of boundary conditions, ring supports, and branching configuration; and (e) type of loading.

Use of an engineering data management system in the analysis of Space Shuttle Orbiter tiles

NASA Technical Reports Server (NTRS)

Giles, G. L.; Vallas, M.

1981-01-01

This paper demonstrates the use of an engineering data management system to facilitate the extensive stress analyses of the Space Shuttle Orbiter thermal protection system. Descriptions are given of the approach and methods used (1) to gather, organize, and store the data, (2) to query data interactively, (3) to generate graphic displays of the data, and (4) to access, transform, and prepare the data for input to a stress analysis program. The relational information management system was found to be well suited to the tile analysis problem because information related to many separate tiles could be accessed individually from a data base having a natural organization from an engineering viewpoint. The flexible user features of the system facilitated changes in data content and organization which occurred during the development and refinement of the tile analysis procedure. Additionally, the query language supported retrieval of data to satisfy a variety of user-specified conditions.

Development of BEM for ceramic composites

NASA Technical Reports Server (NTRS)

Henry, D. P.; Banerjee, P. K.; Dargush, G. F.

1991-01-01

It is evident that for proper micromechanical analysis of ceramic composites, one needs to use a numerical method that is capable of idealizing the individual fibers or individual bundles of fibers embedded within a three-dimensional ceramic matrix. The analysis must be able to account for high stress or temperature gradients from diffusion of stress or temperature from the fiber to the ceramic matrix and allow for interaction between the fibers through the ceramic matrix. The analysis must be sophisticated enough to deal with the failure of fibers described by a series of increasingly sophisticated constitutive models. Finally, the analysis must deal with micromechanical modeling of the composite under nonlinear thermal and dynamic loading. This report details progress made towards the development of a boundary element code designed for the micromechanical studies of an advanced ceramic composite. Additional effort has been made in generalizing the implementation to allow the program to be applicable to real problems in the aerospace industry.

Analytical simulation of weld effects in creep range

NASA Technical Reports Server (NTRS)

Dhalla, A. K.

1985-01-01

The inelastic analysis procedure used to investigate the effect of welding on the creep rupture strength of a typical Liquid Metal Fast Breeder Reactor (LMFBR) nozzle is discussed. The current study is part of an overall experimental and analytical investigation to verify the inelastic analysis procedure now being used to design LMFBR structural components operating at elevated temperatures. Two important weld effects included in the numerical analysis are: (1) the residual stress introduced in the fabrication process; and (2) the time-independent and the time-dependent material property variations. Finite element inelastic analysis was performed on a CRAY-1S computer using the ABAQUS program with the constitutive equations developed for the design of LMFBR structural components. The predicted peak weld residual stresses relax by as much as 40% during elevated temperature operation, and their effect on creep-rupture cracking of the nozzle is considered of secondary importance.

Impact of a stress management program on stress perception of nurses working with psychiatric patients.

PubMed

Sailaxmi, Gandhi; Lalitha, Krishnasamy

2015-04-01

Nurses caring for psychiatric patients may have to face violent emotions and unpredictable behaviour which can be quite stressful. A stress management program may equip nurses with skills to cope effectively with the stress. A one group pre-test and post-test design was adopted to test this hypothesis. Both gender nurses caring for psychiatric patients were invited to undergo 10 consecutive, one hour sessions of a stress management program. The DCL Stress scale (The De Villiers, Carson & Leary Stress Scale; Carson et al., 1997a,b,c) was used to collect data immediately after intervention and four weeks later. RM ANOVA with spss 16 showed that pre-intervention mean stress reduced significantly (p=0.000) from 57.45±16.42 to 41.06±16.51 immediately following the intervention and 26.43±12.82 (p=0.000) four weeks after the intervention. The stress management strategies positively impacted on nurses' stress levels. Copyright © 2015 Elsevier B.V. All rights reserved.

Structural reliability methods: Code development status

NASA Astrophysics Data System (ADS)

Millwater, Harry R.; Thacker, Ben H.; Wu, Y.-T.; Cruse, T. A.

1991-05-01

The Probabilistic Structures Analysis Method (PSAM) program integrates state of the art probabilistic algorithms with structural analysis methods in order to quantify the behavior of Space Shuttle Main Engine structures subject to uncertain loadings, boundary conditions, material parameters, and geometric conditions. An advanced, efficient probabilistic structural analysis software program, NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) was developed as a deliverable. NESSUS contains a number of integrated software components to perform probabilistic analysis of complex structures. A nonlinear finite element module NESSUS/FEM is used to model the structure and obtain structural sensitivities. Some of the capabilities of NESSUS/FEM are shown. A Fast Probability Integration module NESSUS/FPI estimates the probability given the structural sensitivities. A driver module, PFEM, couples the FEM and FPI. NESSUS, version 5.0, addresses component reliability, resistance, and risk.

Structural reliability methods: Code development status

NASA Technical Reports Server (NTRS)

Millwater, Harry R.; Thacker, Ben H.; Wu, Y.-T.; Cruse, T. A.

1991-01-01

The Probabilistic Structures Analysis Method (PSAM) program integrates state of the art probabilistic algorithms with structural analysis methods in order to quantify the behavior of Space Shuttle Main Engine structures subject to uncertain loadings, boundary conditions, material parameters, and geometric conditions. An advanced, efficient probabilistic structural analysis software program, NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) was developed as a deliverable. NESSUS contains a number of integrated software components to perform probabilistic analysis of complex structures. A nonlinear finite element module NESSUS/FEM is used to model the structure and obtain structural sensitivities. Some of the capabilities of NESSUS/FEM are shown. A Fast Probability Integration module NESSUS/FPI estimates the probability given the structural sensitivities. A driver module, PFEM, couples the FEM and FPI. NESSUS, version 5.0, addresses component reliability, resistance, and risk.

Culture Shock: Information Packet for Developing Stress/Culture Shock Programs for Students in Overseas Schools.

ERIC Educational Resources Information Center

Robinson, John

This booklet, written for elementary teachers and counselors, provides information for a three-session stress and culture shock program for fifth and sixth grade students in overseas schools. Session 1 presents an introduction to the program, including discussion questions. Session 2 focuses on stress and culture shock through examples and…

From Stress to Success: How Stress Coping Strategies and Emotional Intelligence Affect Student Success in Healthcare Programs

ERIC Educational Resources Information Center

Barnhardt, Wendy K.

2017-01-01

Healthcare programs attract a large number of students but can only accept limited numbers into academically rigorous and demanding courses that lead to sometimes stressful careers. The purpose of this study was to determine the perceived stressors of healthcare program students and the extent to which these students demonstrated emotional…

Social Support, Needs, and Stress in Urban Families with Children Enrolled in an Early Intervention Program.

ERIC Educational Resources Information Center

Baxter, Abigail; Kahn, James V.

1999-01-01

This study investigated the needs, supports, and stresses of 37 families of children enrolled in an urban early intervention program at program start and 12 months later. At both assessment points, caregivers reported food, shelter, transportation, medical, information, personal time needs, and feelings of stress. Significant differences in scores…

Biomechanics of cervical tooth region and noncarious cervical lesions of different morphology; three-dimensional finite element analysis.

PubMed

Jakupović, Selma; Anić, Ivica; Ajanović, Muhamed; Korać, Samra; Konjhodžić, Alma; Džanković, Aida; Vuković, Amra

2016-01-01

The present study aims to investigate the influence of presence and shape of cervical lesions on biomechanical behavior of mandibular first premolar, subjected to two types of occlusal loading using three-dimensional (3D) finite element method (FEM). 3D models of the mandibular premolar are created from a micro computed tomography X-ray image: model of sound mandibular premolar, model with the wedge-shaped cervical lesion (V lesion), and model with saucer-shaped cervical lesion (U lesion). By FEM, straining of the tooth tissues under functional and nonfunctional occlusal loading of 200 (N) is analyzed. For the analysis, the following software was used: CTAn program 1.10 and ANSYS Workbench (version 14.0). The results are presented in von Mises stress. Values of calculated stress in all tooth structures are higher under nonfunctional occlusal loading, while the functional loading is resulted in homogeneous stress distribution. Nonfunctional load in the cervical area of sound tooth model as well as in the sub-superficial layer of the enamel resulted with a significant stress (over 50 [MPa]). The highest stress concentration on models with lesions is noticed on the apex of the V-shaped lesion, while stress in saucer U lesion is significantly lower and distributed over wider area. The type of the occlusal teeth loading has the biggest influence on cervical stress intensity. Geometric shape of the existing lesion is very important in the distribution of internal stress. Compared to the U-shaped lesions, V-shaped lesions show significantly higher stress concentrations under load. Exposure to stress would lead to its progression.

Finite element analysis of structural engineering problems using a viscoplastic model incorporating two back stresses

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R.

1993-01-01

The feasibility of a viscoplastic model incorporating two back stresses and a drag strength is investigated for performing nonlinear finite element analyses of structural engineering problems. To demonstrate suitability for nonlinear structural analyses, the model is implemented into a finite element program and analyses for several uniaxial and multiaxial problems are performed. Good agreement is shown between the results obtained using the finite element implementation and those obtained experimentally. The advantages of using advanced viscoplastic models for performing nonlinear finite element analyses of structural components are indicated.

Emergency department nurses' experiences of occupational stress: A qualitative study from a public hospital in Bangkok, Thailand.

PubMed

Yuwanich, Nuttapol; Sandmark, Hélène; Akhavan, Sharareh

2015-10-30

Occupational stress has been a health-related issue among nurses for many decades. Emergency department nurses are frequently confronted with occupational stress in their workplace; in particular, they encounter stressful situations and unpredictable events. These encounters could make them feel more stressed than nurses in other departments. Research considering occupational stress from the perspective of Thai emergency department nurses is limited. This study aimed to explore nurses' perceptions of occupational stress in an emergency department. A qualitative approach was used to gain an understanding of nurses' experiences and perceptions regarding stress in their workplace. Semi-structured interviews were used for data collection. Twenty-one emergency department nurses working in a public hospital in Thailand were interviewed, and the data were analyzed using content analysis. The findings comprised three themes: (1) perceived stress, (2) consequences of stress, and (3) stress management. The results of this study can be used by hospital management to help them adopt effective strategies, such as support programs involving co-workers/supervisors, to decrease occupational stress among emergency department nurses. Future research that explores each of the themes found in this study could offer a more comprehensive understanding of nurses' occupational stress in the emergency department.

Computational techniques for design optimization of thermal protection systems for the space shuttle vehicle. Volume 1: Final report

NASA Technical Reports Server (NTRS)

1971-01-01

Computational techniques were developed and assimilated for the design optimization. The resulting computer program was then used to perform initial optimization and sensitivity studies on a typical thermal protection system (TPS) to demonstrate its application to the space shuttle TPS design. The program was developed in Fortran IV for the CDC 6400 but was subsequently converted to the Fortran V language to be used on the Univac 1108. The program allows for improvement and update of the performance prediction techniques. The program logic involves subroutines which handle the following basic functions: (1) a driver which calls for input, output, and communication between program and user and between the subroutines themselves; (2) thermodynamic analysis; (3) thermal stress analysis; (4) acoustic fatigue analysis; and (5) weights/cost analysis. In addition, a system total cost is predicted based on system weight and historical cost data of similar systems. Two basic types of input are provided, both of which are based on trajectory data. These are vehicle attitude (altitude, velocity, and angles of attack and sideslip), for external heat and pressure loads calculation, and heating rates and pressure loads as a function of time.

Analysis of a support group for children of parents with mental illnesses: managing stressful situations.

PubMed

Gladstone, Brenda M; McKeever, Patricia; Seeman, Mary; Boydell, Katherine M

2014-09-01

We report an ethnographic analysis of a psycho-education and peer-support program for school-aged children of parents with mental illnesses. We conducted a critical discourse analysis of the program manual and observed group interactions to understand whether children shared program goals predetermined by adults, and how, or if, the intervention was responsive to their needs. Children were expected to learn mental illness information because "knowledge is power," and to express difficult feelings about being a child of a mentally ill parent that was risky. Participants used humor to manage group expectations, revealing how they made sense of their parents' problems, as well as their own. Suggestions are made for determining good mental health literacy based on children's preferences for explaining circumstances in ways they find relevant, and for supporting children's competencies to manage relationships that are important to them. © The Author(s) 2014.

Efficacy of Seren@ctif, a Computer-Based Stress Management Program for Patients With Adjustment Disorder With Anxiety: Protocol for a Controlled Trial

PubMed Central

Leterme, Anne-Claire; Rougegrez, Laure; Duhamel, Alain; Vaiva, Guillaume

2017-01-01

Background Adjustment disorder with anxiety (ADA) is the most frequent and best characterized stress-related psychiatric disorder. The rationale for prescription of benzodiazepine monotherapy is a public health issue. Cognitive behavioral stress management programs have been studied in many countries. Several reports have shown beyond reasonable doubt their efficiency at reducing perceived stress and anxiety symptoms and improving patient quality of life. Considering the number of people who could benefit from such programs but are unable to access them, self-help programs have been offered. First presented as books, these programs became enriched with computer-based and digital supports. Regrettably, programs for stress management based on cognitive behavioral therapy (CBT), both face-to-face and digital support, have been only minimally evaluated in France. To our knowledge, the Seren@ctif program is the first French language self-help program for stress management using digital supports. Objective The aim of this study is to assess the effectiveness of a 5-week standardized stress management program for reducing anxiety conducted via eLearning (iCBT) or through face-to-face interviews (CBT) with patients suffering from ADA compared with a wait list control group (WLC). These patients seek treatment in a psychiatric unit for anxiety disorders at a university hospital. The primary outcome is change in the State Trait Anxiety Inventory scale trait subscale (STAI-T) between baseline and 2-month visit. Methods This is a multicenter, prospective, open label, randomized controlled study in 3 parallel groups with balanced randomization (1:1:1): computer-based stress management with minimal contact (not fully automated) (group 1), stress management with face-to-face interviews (group 2), and a WLC group that receives usual health care from a general practitioner (group 3). Programs are based on standard CBT principles and include 5 modules in 5 weekly sessions that include the following topics: stress and stress reaction and assessment; deep respiration and relaxation techniques; cognitive restructuring, mindfulness, and acceptance; behavioral skills as problem solving; and time management, healthy behaviors, and emotion regulation. In the Internet-based group, patients have minimal contact with a medical professional before and after every session. In the first session, a flash memory drive is supplied containing videos, audio files, a self-help book portfolio in the form of an eGuide, and log books providing the exercises to be completed between 2 sessions. The patient is encouraged to practice a 20-minute daily exercise 5 or 6 times per week. In the face-to-face group, patients receive the same program from a therapist with 5 weekly sessions without digital support. Interviews and self-assessments were collected face-to-face with the investigator. Results The feasibility of this program is being tested, and results show good accessibility in terms of acceptance, understanding, and treatment credibility. Results are expected in 2018. Conclusions To our knowledge, this is the first French study to examine the effectiveness of a computer-based stress management program for patients with ADA. The Seren@ctif program may be useful within the framework of a psychoeducative approach. It could also be advised for people suffering from other diseases related to stress and for people with a clinical level of perceived stress. Trial Registration Clinicaltrials.gov NCT02621775; https://clinicaltrials.gov/ct2/show/NCT02621775 (Archived by WebCite at http://www.webcitation.org/6tQrkPs1u) PMID:28970192

The importance of trait emotional intelligence and feelings in the prediction of perceived and biological stress in adolescents: hierarchical regressions and fsQCA models.

PubMed

Villanueva, Lidón; Montoya-Castilla, Inmaculada; Prado-Gascó, Vicente

2017-07-01

The purpose of this study is to analyze the combined effects of trait emotional intelligence (EI) and feelings on healthy adolescents' stress. Identifying the extent to which adolescent stress varies with trait emotional differences and the feelings of adolescents is of considerable interest in the development of intervention programs for fostering youth well-being. To attain this goal, self-reported questionnaires (perceived stress, trait EI, and positive/negative feelings) and biological measures of stress (hair cortisol concentrations, HCC) were collected from 170 adolescents (12-14 years old). Two different methodologies were conducted, which included hierarchical regression models and a fuzzy-set qualitative comparative analysis (fsQCA). The results support trait EI as a protective factor against stress in healthy adolescents and suggest that feelings reinforce this relation. However, the debate continues regarding the possibility of optimal levels of trait EI for effective and adaptive emotional management, particularly in the emotional attention and clarity dimensions and for female adolescents.

Stress and efficiency studies in EFG

NASA Technical Reports Server (NTRS)

1986-01-01

The goals of this program were: (1) to define minimum stress configurations for silicon sheet growth at high speeds; (2) to quantify dislocation electrical activity and their limits on minority carrier diffusion length in deformed silicon; and (3) to study reasons for degradation of lifetime with increases in doping level in edge-defined film-fed growth (EFG) materials. A finite element model was developed for calculating residual stress with plastic deformation. A finite element model was verified for EFG control variable relationships to temperature field of the sheet to permit prediction of profiles and stresses encountered in EFG systems. A residual stress measurement technique was developed for finite size EFG material blanks using shadow Moire interferometry. Transient creep response of silicon was investigated in the temperature range between 800 and 1400 C in strain and strain regimes of interest in stress analysis of sheet growth. Quantitative relationships were established between minority carrier diffusion length and dislocation densities using Electron Beam Induced Current (EBIC) measurement in FZ silicon deformed in four point bending tests.

Development of solution techniques for nonlinear structural analysis

NASA Technical Reports Server (NTRS)

Vos, R. G.; Andrews, J. S.

1974-01-01

Nonlinear structural solution methods in the current research literature are classified according to order of the solution scheme, and it is shown that the analytical tools for these methods are uniformly derivable by perturbation techniques. A new perturbation formulation is developed for treating an arbitrary nonlinear material, in terms of a finite-difference generated stress-strain expansion. Nonlinear geometric effects are included in an explicit manner by appropriate definition of an applicable strain tensor. A new finite-element pilot computer program PANES (Program for Analysis of Nonlinear Equilibrium and Stability) is presented for treatment of problems involving material and geometric nonlinearities, as well as certain forms on nonconservative loading.

Two BASIC computer programs for the determination of in situ stresses using the CSIRO hollow inclusion stress cell and the USBM borehole deformation gage

USGS Publications Warehouse

Smith, W.K.

1982-01-01

The mathematical method of determining in-situ stresses by overcoring, using either the U.S. Bureau of Mines Borehole Deformation Gage or the Commonwealth Scientific and Industrial Research Organisation Hollow Inclusion Stress Cell, is summarized, and data reduction programs for each type of instrument, written in BASIC, are presented. The BASIC programs offer several advantages over previously available FORTRAN programs. They can be executed on a desk-top microcomputer at or near the field site, allowing the investigator to assess the quality of the data and make decisions on the need for additional testing while the crew is still in the field. Also, data input is much simpler than with currently available FORTRAN programs; either English or SI units can be used; and standard deviations of the principal stresses are computed as well as those of the geographic components.

Novel Composites for Wing and Fuselage Applications: Speedy Nonlinear Analysis of Postbuckled Panels in Shear (SNAPPS)

NASA Technical Reports Server (NTRS)

Sharp, Dave; Sobel, Larry

1997-01-01

A simple and rapid analysis method, consisting of a number of modular, 'strength-of-materials-type' models, is presented for predicting the nonlinear response and stiffener separation of postbuckled, flat, composite, shear panels. The analysis determines the maximum principal tensile stress in the skin surface layer under to toe. Failure is said to occur when this stress reaches the mean transverse tensile strength of the layer. The analysis methodology consists of a number of closed-form equations that can easily be used in a 'hand analysis. For expediency, they have been programmed into a preliminary design code called SNAPPS (Speedy Nonlinear Analysis of Postbuckled Panels in Shear), which rapidly predicts postbuckling response of the panel for each value of the applied shear load. SNAPPS response and failure predictions were found to agree well with test results for three panels with widely different geometries, laminates and stiffnesses. Design guidelines are given for increasing the load-carrying capacity of stiffened, composite shear panels.

How Do You #relax When You’re #stressed? A Content Analysis and Infodemiology Study of Stress-Related Tweets

PubMed Central

Ritchart, Amanda; Perry, Nicholas; Chaparro, Juan D; Conway, Mike

2017-01-01

Background Stress is a contributing factor to many major health problems in the United States, such as heart disease, depression, and autoimmune diseases. Relaxation is often recommended in mental health treatment as a frontline strategy to reduce stress, thereby improving health conditions. Twitter is a microblog platform that allows users to post their own personal messages (tweets), including their expressions about feelings and actions related to stress and stress management (eg, relaxing). While Twitter is increasingly used as a source of data for understanding mental health from a population perspective, the specific issue of stress—as manifested on Twitter—has not yet been the focus of any systematic study. Objective The objective of our study was to understand how people express their feelings of stress and relaxation through Twitter messages. In addition, we aimed at investigating automated natural language processing methods to (1) classify stress versus nonstress and relaxation versus nonrelaxation tweets, and (2) identify first-hand experience—that is, who is the experiencer—in stress and relaxation tweets. Methods We first performed a qualitative content analysis of 1326 and 781 tweets containing the keywords “stress” and “relax,” respectively. We then investigated the use of machine learning algorithms—in particular naive Bayes and support vector machines—to automatically classify tweets as stress versus nonstress and relaxation versus nonrelaxation. Finally, we applied these classifiers to sample datasets drawn from 4 cities in the United States (Los Angeles, New York, San Diego, and San Francisco) obtained from Twitter’s streaming application programming interface, with the goal of evaluating the extent of any correlation between our automatic classification of tweets and results from public stress surveys. Results Content analysis showed that the most frequent topic of stress tweets was education, followed by work and social relationships. The most frequent topic of relaxation tweets was rest & vacation, followed by nature and water. When we applied the classifiers to the cities dataset, the proportion of stress tweets in New York and San Diego was substantially higher than that in Los Angeles and San Francisco. In addition, we found that characteristic expressions of stress and relaxation varied for each city based on its geolocation. Conclusions This content analysis and infodemiology study revealed that Twitter, when used in conjunction with natural language processing techniques, is a useful data source for understanding stress and stress management strategies, and can potentially supplement infrequently collected survey-based stress data. PMID:28611016

Effects of a Brief Mindfulness-Based Intervention Program for Stress Management among Medical Students: The Mindful-Gym Randomized Controlled Study

ERIC Educational Resources Information Center

Phang, Cheng Kar; Mukhtar, Firdaus; Ibrahim, Normala; Keng, Shian-Ling; Sidik, Sherina Mohd.

2015-01-01

Pursuing undergraduate medical training can be very stressful and academically challenging experience. A 5-week mindfulness-based stress management (MBSM/Mindful-Gym) program was developed to help medical students cope with stress. The aim of this study was to evaluate the effectiveness of the intervention in reducing stress among students in a…

The Comparison of the Effects of a Didactic Stress Management Program and Group Counselling on the Coping Strategies of School Counsellors

ERIC Educational Resources Information Center

Coban, Aysel Esen; Hamamci, Zeynep

2009-01-01

The aim of this study was to compare the effects of a didactic stress management program, group counselling, and a control group on school counsellors' stress coping strategies. Thirty-four school counsellors were randomly assigned to either a didactic stress management group, group counselling, or a control group. The didactic stress management…

Do stressed mothers have heavier children?: A meta-analysis on the relationship between maternal stress and child body mass index

PubMed Central

Tate, Eleanor B.; Wood, Wendy; Liao, Yue; Dunton, Genevieve F.

2015-01-01

Child obesity continues to be a prevalent public health issue. This meta-analysis synthesized 17 studies investigating the association between levels of psychological stress experienced by mothers and the body mass index of their children. The overall standardized mean difference effect size was positive and significantly different from zero in cross-sectional d = 0.20 [k = 14, 95% Confidence Interval (CI): 0.06, 0.34] and longitudinal studies d = 0.18 (k = 5, 95% CI: 0.00, 0.351), and had significant heterogeneity in both [cross-sectional, Q(13) = 193.00, p < 0.001; longitudinal, Q(4) = 29.46, p < 0.001]. In longitudinal studies, effect sizes were larger when children also would have experienced the stressor, Q(6) = 4.68, p < 0.05, for toddlers than infants, Q(4) = 5.04, p < 0.05, and in higher quality studies, Q(4) = 14.58, p < 0.05. Results highlight the potential benefits of including a parent stress management component in childhood obesity prevention programs. PMID:25879393

Yoga therapy for developing emotional intelligence in mid-life managers.

PubMed

Ganpat, Tikhe Sham; Nagendra, H R

2011-01-01

Business executives' lives have become a never-ending race against time, technology, and targets. This race creates tension, which leads to dissatisfaction and frustration and eventually manifests itself as psychological and physiological stress with mental and emotional drain. This modern lifestyle intensifies the stress leading to "excessive tension" and consequent deterioration in "executive efficiency". To assess emotional intelligent quotient (EQ) in managers undergoing yoga-based Self Management of Excessive Tension (SMET) program. 72 managers participated in this study which is of "single group pre-post design." The EQ test developed by Prof N. K. Chadha from University of Delhi was administered as pre and post the 5 days of SMET program. Means, standard deviations, Kolmogorov-Smirnov test, and Wilcoxon signed rank test were used to analyze the data. The data analysis showed 72.02% significant increase (P<0.001) in EQ. The results suggest that participation in a SMET program was associated with improvement in EQ and may have implications for "executive efficiency."

Organizational learning and continuous quality improvement: examining the impact on nursing home performance.

PubMed

Rondeau, Kent V; Wagar, Terry H

2002-01-01

Interest is growing in learning more about the ability of total quality management and continuous quality improvement (TQM/CQI) initiatives to contribute to the performance of healthcare organizations. A major factor in the successful implementation of TQM/CQI is the seminal contribution of an organization's culture. Many implementation efforts have not succeeded because of a corporate culture that failed to stress broader organizational learning. This may help to explain why some TQM/CQI programs have been unsuccessful in improving healthcare organization performance. Organizational performance variables and organizational learning orientation were assessed in a sample of 181 Canadian long-term care organizations that had implemented a formal TQM/CQI program. Categorical regression analysis shows that, in the absence of a strong corporAte culture that stresses organizational learning and employee development, few performance enhancements are reported. The results of the assessment suggest that a TQM/CQI program without the backing of a strong organizational learning culture may be insufficient to achieve augmented organizational performance.

The Effect of Stress Management Model in Quality of Life in Breast Cancer Women.

PubMed

Khodabakhshi Koolaee, Anahita; Falsafinejad, Mohammad Reza; Akbari, Mohammd Esmaeil

2015-08-01

Breast cancer associates with severs severe distress and stress. Since Because of that, the stress management program can train necessary skills to cope with stress; therefore, the current study investigates the effectiveness of stress management on enhancement of quality of life. The aim of the current study is to examine the effectiveness of stress management model in quality of life for breast cancer patients. This research is a quasi-experimental study with pre and post-tests. The 21 subjects were selected from cancer institute of Imam Khomeini in Tehran in 2014. The participants were allocated to two matched groups based on their pre-test scores. They were assigned randomly to the control and experimental groups. Stress management was conducted with the experimental group during 10 sessions. Then the questionnaire was administered at post-test. Statistical analysis was conducted by using the independent t-test and analysis of variance. The research instrument was the core quality of life questionnaire QLQ-C30. The results of the independent t-test showed that there is a significant difference between the pretest and post-test scores in the experimental group (P < 0.05). Also, there is no significant difference between means of quality of life subscales and socio demographic of the patients such as; age, education and disease stage (P < 0.05). The results indicate that stress management can change the irrational and distortion thoughts. So, it enhances the quality of life in breast cancer patients.

Path Analysis Associations Between Perceived Social Support, Stressful Life Events and Other Psychosocial Risk Factors During Pregnancy and Preterm Delivery

PubMed Central

Mirabzadeh, Arash; Dolatian, Mahrokh; Forouzan, Ameneh Setare; Sajjadi, Homeira; Majd, Hamid Alavi; Mahmoodi, Zohreh

2013-01-01

Background Although several socio-medical risk factors have been identified for preterm labor, there is a gap in understanding the underlying etiology of preterm labor. Objectives The current study aimed to analyze the relationship pathway of perceived social support, stressful life events, and other psychosocial risk factors during pregnancy with incidence of preterm labor. Materials and Methods In a prospective cohort study in four hospitals in Tehran, 500 pregnant women in their 24th to 28th gestational weeks were studied. They filled out a self-report questionnaire on perceived social support, depression, anxiety, stress and stressful life events. Sociodemographic characteristics were also assessed. The participants were followed up until labor, and the data about mother and the newborn were collected after labor. The data were analyzed by SPSS 16 and Lisrel 8.8 software programs using pathway analysis. Results The final path model fit well (CFI = 0.96; RMSEA = .064). The results showed that depression, anxiety, and stress (β = -0.18) directly, and stressful life events indirectly (β= -0.0396) had the most predict on gestational age at labor. Perceived social support, directly through socioeconomic status (β=0.25), and indirectly through stress, depression and anxiety (β= -0.26) affected the gestational age at birth (β= 0.0468). Conclusions The current study showed that supporting pregnant mother moderates psychological problems such as stress, anxiety, and depression, and hence reduces preterm labor. PMID:24349750

The effect of educational program on stress, anxiety and depression of the mothers of neonates having colostomy.

PubMed

Goudarzi, Zahra; Askari, Masoumeh; Seyed-Fatemi, Naiemeh; Asgari, Parvaneh; Mehran, Abbas

2016-12-01

One of the problems that mothers of neonates having colostomy face is their disability in caring colostomy at home. This article is going to demonstrate the impact of educational program for these mothers on their sense of empowerment in caring their neonates. This clinical trial was performed in the Neonatal Intensive Care Units (NICUs) to evaluate the level of stress, anxiety and depression of mothers of neonates having colostomy before and after the educational program. In this program, 42 mothers were divided into two groups: experimental group (21 mothers who went under educational plan) and control group (21 mothers who only received the routine care). The levels of stress, anxiety and depression in all mothers were evaluated before and after the educational program with DASS 21 questionnaire. The results showed that educational program in the NICU for experimental groups made them independent and also empowered to care better for their babies. In addition, their depression, anxiety and stress levels were decreased. Since the educational program led to a decrease in the levels of stress, anxiety and depression in mothers, this program is recommended to mothers of neonates having colostomy.

Elbow stress indices using finite element analysis

NASA Astrophysics Data System (ADS)

Yu, Lixin

Section III of the ASME Boiler and Pressure Vessel Code (the Code) specifies rules for the design of nuclear power plant components. NB-3600 of the Code presents a simplified design method using stress indices---Scalar Coefficients used the modify straight pipe stress equations so that they can be applied to elbows, tees and other piping components. The stress indices of piping components are allowed to be determined both analytically and experimentally. This study concentrates on the determination of B2 stress indices for elbow components using finite element analysis (FEA). First, the previous theoretical, numerical and experimental investigations on elbow behavior were comprehensively reviewed, as was the philosophy behind the use of stress indices. The areas of further research was defined. Then, a comprehensive investigation was carried out to determine how the finite element method should be used to correctly simulate an elbow's structural behavior. This investigation included choice of element type, convergence of mesh density, use of boundary restraint and a reconciliation study between FEA and laboratory experiments or other theoretical formulations in both elastic and elasto-plastic domain. Results from different computer programs were also compared. Reasonably good reconciliation was obtained. Appendix II of the Code describes the experimental method to determine B2 stress indices based on load-deflection curves. This procedure was used to compute the B2 stress indices for various loading modes on one particular elbow configuration. The B2 stress indices thus determined were found to be about half of the value calculated from the Code equation. Then the effect on B2 stress indices of those factors such as internal pressure and flange attachments were studied. Finally, the investigation was extended to other configurations of elbow components. A parametric study was conducted on different elbow sizes and schedules. Regression analysis was then used to obtain a modified coefficient and exponent for the Code equation used to calculate B2 index for elbows.

Three-dimensional structural analysis using interactive graphics

NASA Technical Reports Server (NTRS)

Biffle, J.; Sumlin, H. A.

1975-01-01

The application of computer interactive graphics to three-dimensional structural analysis was described, with emphasis on the following aspects: (1) structural analysis, and (2) generation and checking of input data and examination of the large volume of output data (stresses, displacements, velocities, accelerations). Handling of three-dimensional input processing with a special MESH3D computer program was explained. Similarly, a special code PLTZ may be used to perform all the needed tasks for output processing from a finite element code. Examples were illustrated.

Development and test of advanced composite components. Center Directors discretionary fund program

NASA Technical Reports Server (NTRS)

Faile, G.; Hollis, R.; Ledbetter, F.; Maldonado, J.; Sledd, J.; Stuckey, J.; Waggoner, G.; Engler, E.

1985-01-01

This report describes the design, analysis, fabrication, and test of a complex bathtub fitting. Graphite fibers in an epoxy matrix were utilized in manufacturing of 11 components representing four different design and layup concepts. Design allowables were developed for use in the final stress analysis. Strain gage measurements were taken throughout the static load test and correlation of test and analysis data were performed, yielding good understanding of the material behavior and instrumentation requirements for future applications.

Effects of a Brief Qigong-based Stress Reduction Program (BQSRP) in a distressed Korean population: a randomized trial

PubMed Central

2013-01-01

Background Distressed individuals in Korea may benefit from the practice of mind–body exercises such as Qigong. However, the effectiveness of such techniques needs to be investigated. Methods Fifty participants who were eligible to this study were randomized into a group receiving a 4-week intervention of a brief Qigong-based stress reduction program (BQSRP) or a wait-list control group. Before and after the intervention period, saliva samples were collected and questionnaires were completed on perceived stress, anxiety, “Hwa-Byung” (anger syndrome), and quality of life. Salivary cortisol has emerged in mind-body therapy research as an easy-to-collect, relatively inexpensive, biologic marker of stress. Salivary corisol were collected to evaluate physiological effect of BQSRP. Between-group comparisons of change from baseline to study completion were analyzed by analysis of covariance for the Perceived Stress Scale and independent two sample t-tests for other measures. Results Compared with the control group, the BQSRP intervention group displayed significantly larger decreases in Perceived Stress Scale scores (p = 0.0006), State Anxiety scores (p = 0.0028), Trait Anxiety scores (p < 0.0001), personality subscale scores of the Hwa-Byung Scale (p = 0.0321), symptoms scores of the Hwa-Byung Scale (p = 0.0196), and a significantly larger increase in World Health Organization Quality of Life Abbreviated version scores (ps < .05). Salivary cortisol levels were not changed. Conclusions The BQSRP appears to be effective in reducing stress perception, anxiety, anger, and improving quality of life (KCT0000056). PMID:23705963

Effects of a veterinary student leadership program on measures of stress and academic performance.

PubMed

Moore, Dale A; Truscott, Marla L; St Clair, Lisa; Klingborg, Donald J

2007-01-01

Assuming leadership roles in veterinary student governance or club activities could be considered an added stressor for students because of the impact on time available for personal and academic activities. The study reported here evaluated the effects of participation in a leadership program and leadership activity across two classes of veterinary students on measures of stress, using the Derogatis Stress Profile (DSP), and on veterinary school academic performance, measured as annual grade-point average (GPA) over a three-year period. Program participants and their classmates completed the DSP three times across the first three years of veterinary school. On average, participating students reported self-declared stress levels that were higher and measured DSP stress levels that were lower than those of the general population. Students were more likely to assume elected or appointed leadership roles while in their first three years of the veterinary degree program if they participated in the optional leadership program and demonstrated lower stress in several dimensions. Some increased stress, as measured in some of the DSP stress dimensions, had a small but statistically significant influence on professional school GPA. The study determined that the most important predictors of students' cumulative GPA across the three-year period were the GPA from the last 45 credits of pre-veterinary coursework and their quantitative GRE scores. The results of the study indicate that neither participation in the leadership program nor taking on leadership roles within veterinary school appeared to influence veterinary school academic performance or to increase stress.

Evaluation of Stress and a Stress-Reduction Program Among Radiologic Technologists.

PubMed

Reingold, Lynn

2015-01-01

To investigate stress levels and causes of stress among radiologic technologists and determine whether an intervention could reduce stress in a selected radiologic technologist population. Demographic characteristics and data on preintervention stress sources and levels were collected through Internet-based questionnaires. A 6-week, self-administered, mindfulness-based stress-reduction program was conducted as a pilot intervention with 42 radiologic technologists from the Veterans Administration Medical Center. Data also were collected postintervention. Identified sources of stress were compared with findings from previous studies. Some radiologic technologists experienced improvement in their perceptions of stress after the intervention. Sources of stress for radiologic technologists were similar to those shown in earlier research, including inconsistent management, poor management communication, conflicting demands, long work hours, excessive workloads, lack of work breaks, and time pressures. The mindfulness-based stress-reduction program is an example of an inexpensive method that could improve personal well-being, reduce work errors, improve relationships in the workplace, and increase job satisfaction. More research is needed to determine the best type of intervention for stress reduction in a larger radiologic technologist population.

Work-Related Stressors Among Maternal, Infant, and Early Childhood Home Visiting (MIECHV) Home Visitors: A Qualitative Study.

PubMed

Alitz, Paige J; Geary, Shana; Birriel, Pamela C; Sayi, Takudzwa; Ramakrishnan, Rema; Balogun, Omotola; Salloum, Alison; Marshall, Jennifer T

2018-05-31

Background The Florida Maternal, Infant, and Early Childhood Home Visiting (MIECHV) program delivers evidence-based home visiting services to over 1400 families each year. Home visitors are integral in providing resources for families to promote healthy pregnancy, child development, family wellness, and self-sufficiency. Due to the nature of this work, home visitors experience work-related pressures and stressors that can impact staff well-being and retention. Objectives The purpose of this study was to understand primary sources of work-related stress experienced by home visitors, subsequent effects on their engagement with program participants, and to learn of coping mechanisms used to manage stress. Methods In 2015, Florida MIECHV program evaluators conducted ten focus groups with 49 home visitors during which they ranked and discussed their top sources of work-related stress. Qualitative analysis was conducted to identify emergent themes in work-related stressors and coping/supports. Results Across all sites, the burden of paperwork and data entry were the highest ranked work-related stressors perceived as interfering with home visitors' engagement with participants. The second-highest ranked stressors included caseload management, followed by a lack of resources for families, and dangerous environments. Home visitors reported gratification in their helping relationships families, and relied on coworkers or supervisors as primary sources of workplace support along with self-care (e.g. mini-vacations, recreation, and counseling). Conclusions for practice Florida MIECHV home visitors across all ten focus groups shared similar work-related stressors that they felt diminished engagement with program participants and could impact participant and staff retention. In response, Florida MIECHV increased resources to support home visitor compensation and reduce caseloads, and obtained a competitive award from HRSA to implement a mindfulness-based stress reduction training statewide.

Transcriptome Analysis Reveals Genes Commonly Induced by Botrytis cinerea Infection, Cold, Drought and Oxidative Stresses in Arabidopsis

PubMed Central

Al-Ameri, Salma; Al-Mahmoud, Bassam; Awwad, Falah; Al-Rawashdeh, Ahmed; Iratni, Rabah; AbuQamar, Synan

2014-01-01

Signaling pathways controlling biotic and abiotic stress responses may interact synergistically or antagonistically. To identify the similarities and differences among responses to diverse stresses, we analyzed previously published microarray data on the transcriptomic responses of Arabidopsis to infection with Botrytis cinerea (a biotic stress), and to cold, drought, and oxidative stresses (abiotic stresses). Our analyses showed that at early stages after B. cinerea inoculation, 1498 genes were up-regulated (B. cinerea up-regulated genes; BUGs) and 1138 genes were down-regulated (B. cinerea down-regulated genes; BDGs). We showed a unique program of gene expression was activated in response each biotic and abiotic stress, but that some genes were similarly induced or repressed by all of the tested stresses. Of the identified BUGs, 25%, 6% and 12% were also induced by cold, drought and oxidative stress, respectively; whereas 33%, 7% and 5.5% of the BDGs were also down-regulated by the same abiotic stresses. Coexpression and protein-protein interaction network analyses revealed a dynamic range in the expression levels of genes encoding regulatory proteins. Analysis of gene expression in response to electrophilic oxylipins suggested that these compounds are involved in mediating responses to B. cinerea infection and abiotic stress through TGA transcription factors. Our results suggest an overlap among genes involved in the responses to biotic and abiotic stresses in Arabidopsis. Changes in the transcript levels of genes encoding components of the cyclopentenone signaling pathway in response to biotic and abiotic stresses suggest that the oxylipin signal transduction pathway plays a role in plant defense. Identifying genes that are commonly expressed in response to environmental stresses, and further analyzing the functions of their encoded products, will increase our understanding of the plant stress response. This information could identify targets for genetic modification to improve plant resistance to multiple stresses. PMID:25422934

Reference earth orbital research and applications investigations (blue book). Volume 4: Earth observations

NASA Technical Reports Server (NTRS)

1971-01-01

The earth observations capability of the space station and space shuttle program definition is discussed. The stress in the functional program element has been to update the sensor specifications and to shift some of the emphasis from sensors to experiments to be done aboard the facility. The earth observations facility will include provisions for data acquisition, sensor control and display, data analysis, and maintenance and repair. The facility is research and development in nature with a potential for operational applications.

GRIZZLY/FAVOR Interface Project Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickson, Terry L; Williams, Paul T; Yin, Shengjun

As part of the Light Water Reactor Sustainability (LWRS) Program, the objective of the GRIZZLY/FAVOR Interface project is to create the capability to apply GRIZZLY 3-D finite element (thermal and stress) analysis results as input to FAVOR probabilistic fracture mechanics (PFM) analyses. The one benefit of FAVOR to Grizzly is the PROBABILISTIC capability. This document describes the implementation of the GRIZZLY/FAVOR Interface, the preliminary verification and tests results and a user guide that provides detailed step-by-step instructions to run the program.

Acceleration effects in solid propellant rocket motors

NASA Technical Reports Server (NTRS)

Langhenry, M. T.

1986-01-01

The performance variations due to acceleration loads imposed on spinning solid propellant rocket motors are investigated. The four potentially most significant modes of acceleration-induced phenomena are identified from a study of the literature and modeled. The four modes are a mechanical mode which deals with deformations of the propellant and case: a thermodynamic mode which covers acceleration-induced combustion phenomena; a stress mode which covers the stressed propellant's effect on burn rate; and a gas dynamic mode which deals with changes in gas flow in the chamber and through the nozzle. Simplified models of each mode are developed or taken from the literature and are added to an internal ballistics evaluation computer program. The resulting analysis is the first to include all of the modes. In order to do this an original analysis of the mechanical and stress modes was necessary. However, the analysis shows that the stress mode is not important for the circular perforated grains studied. The other effects are shown to have a significant influence on solid rocket motor performance. The magnitude of the different mode effects are such that one may not be ignored over the others as has been done in the past. The results of the analysis are compared to published rocket motor data. The comparisons indicate an erosive burning effect that is a function of spin rate. A qualitative explanation of the erosive effect is presented.

Involuntary psychiatric hospitalisation, stigma stress and recovery: a 2-year study.

PubMed

Xu, Z; Lay, B; Oexle, N; Drack, T; Bleiker, M; Lengler, S; Blank, C; Müller, M; Mayer, B; Rössler, W; Rüsch, N

2018-01-31

Compulsory admission can be experienced as devaluing and stigmatising by people with mental illness. Emotional reactions to involuntary hospitalisation and stigma-related stress may affect recovery, but longitudinal data are lacking. We, therefore, examined the impact of stigma-related emotional reactions and stigma stress on recovery over a 2-year period. Shame and self-contempt as emotional reactions to involuntary hospitalisation, stigma stress, self-stigma and empowerment, as well as recovery were assessed among 186 individuals with serious mental illness and a history of recent involuntary hospitalisation. More shame, self-contempt and stigma stress at baseline were correlated with increased self-stigma and reduced empowerment after 1 year. More stigma stress at baseline was associated with poor recovery after 2 years. In a longitudinal path analysis more stigma stress at baseline predicted poorer recovery after 2 years, mediated by decreased empowerment after 1 year, controlling for age, gender, symptoms and recovery at baseline. Stigma stress may have a lasting detrimental effect on recovery among people with mental illness and a history of involuntary hospitalisation. Anti-stigma interventions that reduce stigma stress and programs that enhance empowerment could improve recovery. Future research should test the effect of such interventions on recovery.

Supporting university students with autism spectrum disorder.

PubMed

Hillier, Ashleigh; Goldstein, Jody; Murphy, Deirdra; Trietsch, Rhoda; Keeves, Jacqueline; Mendes, Eva; Queenan, Alexa

2018-01-01

Increasing numbers of students with autism spectrum disorder are entering higher education. Their success can be jeopardized by organizational, social/emotional, and academic challenges if appropriate supports are not in place. Our objective was to evaluate the effectiveness of a support group model for university students with autism spectrum disorder in improving psychological and functional outcomes. A curriculum guided the weekly discussions and consisted of topics such as time and stress management, managing group work, and social communication. Efficacy was assessed through pre- and post self-report measures focused on self-esteem, loneliness, anxiety, and depression. Functional changes in academic and social skills were examined through qualitative analysis of focus groups. Findings from the self-report measures indicated significant reductions in feelings of loneliness and general anxiety, and a significant increase in self-esteem at the end of the program compared to the beginning. Five prominent themes were identified in the focus-group analysis and reflected how the program had positively impacted participants' skills and coping: executive functioning; goal setting; academics and resources; stress and anxiety; and social. Given the cost effectiveness of "in-house" interventions and the potential for improving academic outcomes and retention of students with autism spectrum disorder, further research examining similar program models is warranted.

TECHNICAL NOTE: Actuation displacement performance change of pre-stressed piezoelectric actuators attached to a flat surface

NASA Astrophysics Data System (ADS)

Goo, Nam Seo; Phuoc Phan, Van; Park, Hoon Cheol

2009-03-01

Pre-stressed piezoelectric actuators such as RAINBOW, THUNDER™, and LIPCA have a curvature due to a mismatch of the coefficient of thermal expansion, which inevitably exists during the manufacturing process. This technical note provides an answer to the question of how their actuation displacement performance changes when the curved pre-stressed piezoelectric actuators are attached to a flat surface. Finite element analysis with the ANSYS™ program was used to calculate the stress distribution inside a LIPCA, one of the pre-stressed piezoelectric actuators, after the LIPCA was cured and attached to the flat surface. The change of actuation displacement performance can be explained in terms of the relation between the piezoelectric strain constants and internal stress. As a result of the curing and attachment to a flat surface, the two-dimensional stress state inside the piezoceramic layer leads to an expected increase of around 51% for the longitudinal piezoelectric strain constant. To confirm this result, we reconsider the experimental results of the actuation moment measurement of the LIPCA and bare lead zirconium titanate.

Genome-wide DNA methylation levels and altered cortisol stress reactivity following childhood trauma in humans

PubMed Central

Houtepen, Lotte C.; Vinkers, Christiaan H.; Carrillo-Roa, Tania; Hiemstra, Marieke; van Lier, Pol A.; Meeus, Wim; Branje, Susan; Heim, Christine M.; Nemeroff, Charles B.; Mill, Jonathan; Schalkwyk, Leonard C.; Creyghton, Menno P.; Kahn, René S.; Joëls, Marian; Binder, Elisabeth B.; Boks, Marco P. M.

2016-01-01

DNA methylation likely plays a role in the regulation of human stress reactivity. Here we show that in a genome-wide analysis of blood DNA methylation in 85 healthy individuals, a locus in the Kit ligand gene (KITLG; cg27512205) showed the strongest association with cortisol stress reactivity (P=5.8 × 10−6). Replication was obtained in two independent samples using either blood (N=45, P=0.001) or buccal cells (N=255, P=0.004). KITLG methylation strongly mediates the relationship between childhood trauma and cortisol stress reactivity in the discovery sample (32% mediation). Its genomic location, a CpG island shore within an H3K27ac enhancer mark, and the correlation between methylation in the blood and prefrontal cortex provide further evidence that KITLG methylation is functionally relevant for the programming of stress reactivity in the human brain. Our results extend preclinical evidence for epigenetic regulation of stress reactivity to humans and provide leads to enhance our understanding of the neurobiological pathways underlying stress vulnerability. PMID:26997371

[Second victim : Critical incident stress management in clinical medicine].

PubMed

Schiechtl, B; Hunger, M S; Schwappach, D L; Schmidt, C E; Padosch, S A

2013-09-01

Critical incidents in clinical medicine can have far-reaching consequences on patient health. In cases of severe medical errors they can seriously harm the patient or even lead to death. The involvement in such an event can result in a stress reaction, a so-called acute posttraumatic stress disorder in the healthcare provider, the so-called second victim of an adverse event. Psychological distress may not only have a long lasting impact on quality of life of the physician or caregiver involved but it may also affect the ability to provide safe patient care in the aftermath of adverse events. A literature review was performed to obtain information on care giver responses to medical errors and to determine possible supportive strategies to mitigate negative consequences of an adverse event on the second victim. An internet search and a search in Medline/Pubmed for scientific studies were conducted using the key words "second victim, "medical error", "critical incident stress management" (CISM) and "critical incident stress reporting system" (CIRS). Sources from academic medical societies and public institutions which offer crisis management programs where analyzed. The data were sorted by main categories and relevance for hospitals. Analysis was carried out using descriptive measures. In disaster medicine and aviation navigation services the implementation of a CISM program is an efficient intervention to help staff to recover after a traumatic event and to return to normal functioning and behavior. Several other concepts for a clinical crisis management plan were identified. The integration of CISM and CISM-related programs in a clinical setting may provide efficient support in an acute crisis and may help the caregiver to deal effectively with future error events and employee safety.

Emotional Differences between Early and Late Degree Program Music Teacher Education Students Using a Concise Emotional Inventory

ERIC Educational Resources Information Center

Fredrickson, William E.; Madsen, Clifford K.

2010-01-01

Teaching music can be a stressful profession. How current and future teachers perceive stress, and the personal emotions that result from stressful situations, raises many questions. This study investigated differences in perception of levels of emotional stress between early and late program students in music teacher education using a concise…

Coping with Stress. Stress Education Curriculum. A Stress Control Program for Troubled Youth. Fifth Edition.

ERIC Educational Resources Information Center

Trotter, Jennie C.

Project Stress Control was developed for the Fulton County (Georgia) school system in 1984 and was implemented at an elementary school. The program was very successful in reducing suspension rates and office referrals for disruptive behavior and in increasing academic performance and parent participation. This curriculum is an outgrowth of the…

Pilot Testing of the NURSE Stress Management Intervention.

PubMed

Delaney, Colleen; Barrere, Cynthia; Robertson, Sue; Zahourek, Rothlyn; Diaz, Desiree; Lachapelle, Leeanne

2016-12-01

Student nurses experience significant stress during their education, which may contribute to illness and alterations in health, poor academic performance, and program attrition. The aim of this pilot study was to evaluate the feasibility and potential efficacy of an innovative stress management program in two baccalaureate nursing programs in Connecticut, named NURSE (Nurture nurse, Use resources, foster Resilience, Stress and Environment management), that assists nursing students to develop stress management plans. An explanatory sequential mixed-methods design was used to evaluate the effects of the intervention with 40 junior nursing students. Results from this study provide evidence that the NURSE intervention is highly feasible, and support further testing to examine the effect of the intervention in improving stress management in nursing students. © The Author(s) 2015.

Proceedings of the 1973 Lyndon B. Johnson Space Center Endocrine Program Conference

NASA Technical Reports Server (NTRS)

1975-01-01

Papers given at the conference are presented. Subjects covered include the following: biochemical changes during 28 days of space flight, modulating the pituitary-adrenal response to stress, the significance of biorhythms in space flight, the importance of the rein-angiotensin system in normal cardiovascular homeostasis, a progress report of stress-induced changes in corticosteroid metabolism, recent studies of physiological factors involved in the regulation of serotonin content and turnover in the brain, the role of brain biogenic amines in the control of pituitary-adrenocortical activity, application of the water immersion model to man by studies of acid-base homeostasis during simulated weightlessness, the present status of physiological studies and analysis of calcium homeostasis in the Apollo and Skylab programs, and endocrine considerations in the red-cell-mass and plasma-volume changes of Skylab 2 and 3 crews.

How exactly can computer simulation predict the kinematics and contact status after TKA? Examination in individualized models.

PubMed

Tanaka, Yoshihisa; Nakamura, Shinichiro; Kuriyama, Shinichi; Ito, Hiromu; Furu, Moritoshi; Komistek, Richard D; Matsuda, Shuichi

2016-11-01

It is unknown whether a computer simulation with simple models can estimate individual in vivo knee kinematics, although some complex models have predicted the knee kinematics. The purposes of this study are first, to validate the accuracy of the computer simulation with our developed model during a squatting activity in a weight-bearing deep knee bend and then, to analyze the contact area and the contact stress of the tri-condylar implants for individual patients. We compared the anteroposterior (AP) contact positions of medial and lateral condyles calculated by the computer simulation program with the positions measured from the fluoroscopic analysis for three implanted knees. Then the contact area and the stress including the third condyle were calculated individually using finite element (FE) analysis. The motion patterns were similar in the simulation program and the fluoroscopic surveillance. Our developed model could nearly estimate the individual in vivo knee kinematics. The mean and maximum differences of the AP contact positions were 1.0mm and 2.5mm, respectively. At 120° of knee flexion, the contact area at the third condyle was wider than the both condyles. The mean maximum contact stress at the third condyle was lower than the both condyles at 90° and 120° of knee flexion. Individual bone models are required to estimate in vivo knee kinematics in our simple model. The tri-condylar implant seems to be safe for deep flexion activities due to the wide contact area and low contact stress. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Case Study on Engineering Failure Analysis of Link Chain

PubMed Central

Lee, Seong-Beom; Lee, Hong-Chul

2010-01-01

Objectives The objective of this study was to investigate the effect of chain installation condition on stress distribution that could eventually cause disastrous failure from sudden deformation and geometric rupture. Methods Fractographic method used for the failed chain indicates that over-stress was considered as the root cause of failure. 3D modeling and finite element analysis for the chain, used in a crane hook, were performed with a three-dimensional interactive application program, CATIA, commercial finite element analysis and computational fluid dynamic software, ANSYS. Results The results showed that the state of stress was changed depending on the initial position of the chain that was installed in the hook. Especially, the magnitude of the stress was strongly affected by the bending forces, which are 2.5 times greater (under the simulation condition currently investigated) than that from the plain tensile load. Also, it was noted that the change of load state is strongly related to the failure of parts. The chain can hold an ultimate load of about 8 tons with only the tensile load acting on it. Conclusion The conclusions of this research clearly showed that a reduction of the loss from similar incidents can be achieved when an operator properly handles the installation of the chain. PMID:22953162

Comparative Transcriptomic Analysis of the Response to Cold Acclimation in Eucalyptus dunnii

PubMed Central

Liu, Yiqing; Jiang, Yusong; Lan, Jianbin; Zou, Yong; Gao, Junping

2014-01-01

Eucalyptus dunnii is an important macrophanerophyte with high economic value. However, low temperature stress limits its productivity and distribution. To study the cold response mechanisms of E. dunnii, 5 cDNA libraries were constructed from mRNA extracted from leaves exposed to cold stress for varying lengths of time and were evaluated by RNA-Seq analysis. The assembly of the Illumina datasets was optimized using various assembly programs and parameters. The final optimized assembly generated 205,325 transcripts with an average length of 1,701 bp and N50 of 2,627 bp, representing 349.38 Mb of the E. dunnii transcriptome. Among these transcripts, 134,358 transcripts (65.4%) were annotated in the Nr database. According to the differential analysis results, most transcripts were up-regulated as the cold stress prolonging, suggesting that these transcripts may be involved in the response to cold stress. In addition, the cold-relevant GO categories, such as ‘response to stress’ and ‘translational initiation’, were the markedly enriched GO terms. The assembly of the E. dunnii gene index and the GO classification performed in this study will serve as useful genomic resources for the genetic improvement of E. dunnii and also provide insights into the molecular mechanisms of cold acclimation in E. dunnii. PMID:25412179

Investigation of marital satisfaction and its relationship with job stress and general health of nurses in Qazvin, Iran.

PubMed

Azimian, Jalil; Piran, Pegah; Jahanihashemi, Hassan; Dehghankar, Leila

2017-04-01

Pressures in nursing can affect family life and marital problems, disrupt common social problems, increase work-family conflicts and endanger people's general health. To determine marital satisfaction and its relationship with job stress and general health of nurses. This descriptive and cross-sectional study was done in 2015 in medical educational centers of Qazvin by using an ENRICH marital satisfaction scale and General Health and Job Stress questionnaires completed by 123 nurses. Analysis was done by SPSS version 19 using descriptive and analytical statistics (Pearson correlation, t-test, ANOVA, Chi-square, regression line, multiple regression analysis). The findings showed that 64.4% of nurses had marital satisfaction. There was significant relationship between age (p=0.03), job experience (p=0.01), age of spouse (p=0.01) and marital satisfaction. The results showed that there was a significant relationship between marital satisfaction and general health (p<0.0001). Multiple regression analysis showed that there was a significant relationship between depression (p=0.012) and anxiety (p=0.001) with marital satisfaction. Due to high levels of job stress and disorder in general health of nurses and low marital satisfaction by running health promotion programs and paying attention to its dimensions can help work and family health of nurses.

2017 GTO Project review Laboratory Evaluation of EGS Shear Stimulation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bauer, Stephen J.

The objectives and purpose of this research has been to produce laboratory-based experimental and numerical analyses to provide a physics-based understanding of shear stimulation phenomena (hydroshearing) and its evolution during stimulation. Water was flowed along fractures in hot and stressed fractured rock, to promote slip. The controlled laboratory experiments provide a high resolution/high quality data resource for evaluation of analysis methods developed by DOE to assess EGS “behavior” during this stimulation process. Segments of the experimental program will provide data sets for model input parameters, i.e., material properties, and other segments of the experimental program will represent small scale physicalmore » models of an EGS system, which may be modeled. The coupled lab/analysis project has been a study of the response of a fracture in hot, water-saturated fractured rock to shear stress experiencing fluid flow. Under this condition, the fracture experiences a combination of potential pore pressure changes and fracture surface cooling, resulting in slip along the fracture. The laboratory work provides a means to assess the role of “hydroshearing” on permeability enhancement in reservoir stimulation. Using the laboratory experiments and results to define boundary and input/output conditions of pore pressure, thermal stress, fracture shear deformation and fluid flow, and models were developed and simulations completed by the University of Oklahoma team. The analysis methods are ones used on field scale problems. The sophisticated numerical models developed contain parameters present in the field. The analysis results provide insight into the role of fracture slip on permeability enhancement-“hydroshear” is to be obtained. The work will provide valuable input data to evaluate stimulation models, thus helping design effective EGS.« less

Reflecting on Social Emotional Learning: A Critical Perspective on Trends in the United States

ERIC Educational Resources Information Center

Hoffman, Diane M.

2009-01-01

This critical cultural analysis of trends in the field of social emotional learning (SEL) in the United States considers how ideas concerning emotional skills and competencies have informed programmatic discourse. While currently stressing links between SEL and academic achievement, program literature also places emphasis on ideals of caring,…

Listening to Students: Studying for a Part-Time Degree in Early Childhood Studies.

ERIC Educational Resources Information Center

Burn, Elizabeth

For this study, 12 part-time students in an early childhood studies program were interviewed and videotaped concerning their personal stories as students. Initial analysis of their responses revealed main themes: (1) economic barriers to full-time degree study; (2) domestic responsibilities/gender issues (for example, the stress of juggling…

BEAM: A Finite Element Program for the Collapse Analysis of Vehicle Structures

DTIC Science & Technology

1994-06-01

deflects a latera: d&stance 8, its bending stresses are increased. Nor can BEAM account for the reduction of plastic moment capacity due to axial loads...Figure 9: The load -displacement curve for Frame 4, comparing elastic-, rigid plastuc and Sttq’ BI-Step analyses with experimental results. The

Berkeley Doctoral Students Appraise Their Academic Programs.

ERIC Educational Resources Information Center

Heiss, Ann M.

1967-01-01

This study was designed to obtain the judgment of doctoral students about the quality and character of their experiences in graduate study, and to identify stress stages in the degree process. An analysis was made of over 2,300 responses to a survey questionnaire and 100 interviews with doctoral students at the University of California at…

First-wall structural analysis of the self-cooled water blanket concept

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Brien, D.A.; Steiner, D.; Embrechts, M.J.

1986-01-01

A novel blanket concept recently proposed utilizes water with small amounts of dissolved lithium compound as both coolant and breeder. The inherent simplicity of this idea should result in an attractive breeding blanket for fusion reactors. In addition, the available base of relevant information accumulated through water-cooled fission reactor programs should greatly facilitate the R and D effort required to validate this concept. First-wall and blanket designs have been developed first for the tandem mirror reactor (TMR) due to the obvious advantages of this geometry. First-wall and blanket designs will also be developed for toroidal reactors. A simple plate designmore » with coolant tubes welded on the back (side away from plasma) was chosen as the first wall for the TMR application. Dimensions and materials were chosen to minimize temperature differences and thermal stresses. A finite element code (STRAW), originally developed for the analysis of core components subjected to high-pressure transients in the fast breeder program, was utilized to evaluate stresses in the first wall.« less

Applications of FEM and BEM in two-dimensional fracture mechanics problems

NASA Technical Reports Server (NTRS)

Min, J. B.; Steeve, B. E.; Swanson, G. R.

1992-01-01

A comparison of the finite element method (FEM) and boundary element method (BEM) for the solution of two-dimensional plane strain problems in fracture mechanics is presented in this paper. Stress intensity factors (SIF's) were calculated using both methods for elastic plates with either a single-edge crack or an inclined-edge crack. In particular, two currently available programs, ANSYS for finite element analysis and BEASY for boundary element analysis, were used.

Combustor liner durability analysis

NASA Technical Reports Server (NTRS)

Moreno, V.

1981-01-01

An 18 month combustor liner durability analysis program was conducted to evaluate the use of advanced three dimensional transient heat transfer and nonlinear stress-strain analyses for modeling the cyclic thermomechanical response of a simulated combustor liner specimen. Cyclic life prediction technology for creep/fatigue interaction is evaluated for a variety of state-of-the-art tools for crack initiation and propagation. The sensitivity of the initiation models to a change in the operating conditions is also assessed.

Adaptable structural synthesis using advanced analysis and optimization coupled by a computer operating system

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, J.; Bhat, R. B.

1979-01-01

A finite element program is linked with a general purpose optimization program in a 'programing system' which includes user supplied codes that contain problem dependent formulations of the design variables, objective function and constraints. The result is a system adaptable to a wide spectrum of structural optimization problems. In a sample of numerical examples, the design variables are the cross-sectional dimensions and the parameters of overall shape geometry, constraints are applied to stresses, displacements, buckling and vibration characteristics, and structural mass is the objective function. Thin-walled, built-up structures and frameworks are included in the sample. Details of the system organization and characteristics of the component programs are given.

Stress modeling of microdiaphragm pressure sensors

NASA Technical Reports Server (NTRS)

Tack, P. C.; Busta, H. H.

1986-01-01

A finite element program analysis was used to model the stress distribution of two monocrystalline silicon diaphragm pressure sensors. One configuration consists of an anisotropically backside etched diaphragm into a 250 micron thick, (100) oriented, silicon wafer. The diaphragm and total chip dimensions are given. The device is rigidly clamped on the back to a support substrate. Another configuration consists of a monocrystalline, (100), microdiaphragm which is formed on top of the wafer and whose area is reduced by a factor of 25 over the first configuration. The diaphragm is rigidly clamped to the silicon wafer. The stresses were calculated at a gauge pressure of 300 mm Hg and used to estimate the piezoresistive responses of resistor elements which were placed parallel and perpendicular near the diaphragm edges.

Genome-wide analysis of drought induced gene expression changes in flax (Linum usitatissimum).

PubMed

Dash, Prasanta K; Cao, Yongguo; Jailani, Abdul K; Gupta, Payal; Venglat, Prakash; Xiang, Daoquan; Rai, Rhitu; Sharma, Rinku; Thirunavukkarasu, Nepolean; Abdin, Malik Z; Yadava, Devendra K; Singh, Nagendra K; Singh, Jas; Selvaraj, Gopalan; Deyholos, Mike; Kumar, Polumetla Ananda; Datla, Raju

2014-01-01

A robust phenotypic plasticity to ward off adverse environmental conditions determines performance and productivity in crop plants. Flax (linseed), is an important cash crop produced for natural textile fiber (linen) or oilseed with many health promoting products. This crop is prone to drought stress and yield losses in many parts of the world. Despite recent advances in drought research in a number of important crops, related progress in flax is very limited. Since, response of this plant to drought stress has not been addressed at the molecular level; we conducted microarray analysis to capture transcriptome associated with induced drought in flax. This study identified 183 differentially expressed genes (DEGs) associated with diverse cellular, biophysical and metabolic programs in flax. The analysis also revealed especially the altered regulation of cellular and metabolic pathways governing photosynthesis. Additionally, comparative transcriptome analysis identified a plethora of genes that displayed differential regulation both spatially and temporally. These results revealed co-regulated expression of 26 genes in both shoot and root tissues with implications for drought stress response. Furthermore, the data also showed that more genes are upregulated in roots compared to shoots, suggesting that roots may play important and additional roles in response to drought in flax. With prolonged drought treatment, the number of DEGs increased in both tissue types. Differential expression of selected genes was confirmed by qRT-PCR, thus supporting the suggested functional association of these intrinsic genes in maintaining growth and homeostasis in response to imminent drought stress in flax. Together the present study has developed foundational and new transcriptome data sets for drought stress in flax.

Animal-Assisted Stress Reduction Programs in Higher Education

ERIC Educational Resources Information Center

Haggerty, Julie M.; Mueller, Megan Kiely

2017-01-01

This study investigated the prevalence of increasingly popular animal-assisted stress relief programs at higher education institutions across the United States. Although research on animal-assisted programs is increasing, there is still a lack of information documenting implementation of these programs. Therefore, the purpose of this study was to…

Overpressure, Flow Focusing, Compaction and Slope Stability on the continental slope: Insights from IODP Expedition 308

NASA Astrophysics Data System (ADS)

Flemings, P. B.

2010-12-01

Integrated Ocean Drilling Program Expepedition 308 used direct measurements of pore pressure, analysis of hydromechanical properties, and geological analysis to illuminate how sedimentation, flow focusing, overpressure, and slope stability couple beneath the seafloor on the deepwater continental slope in the Gulf of Mexico. We used pore pressure penetrometers to measure severe overpressures (60% of the difference between lithostatic stress and hydrostatic pressure) that extend from the seafloor for 100’s of meters. We ran uniaxial consolidation experiments on whole core and found that although permeability is relatively high near the seafloor, the sediments are highly compressible. As a result, the coefficient of consolidation (the hydraulic diffusivity) is remarkably constant over a large range of effective stresses. This behavior accounts for the high overpressure that begins near the seafloor and extends to depth. Forward modeling suggests that flow is driven laterally along a permeable unit called the Blue Unit. Calculations suggest that soon after deposition, lateral flow lowered the effective stress and triggered the submarine landslides that we observe. Later in the evolution of this system, overpressure may have pre-conditioned the slope to failure by earthquakes. Results from IODP Expedition 308 illustrate how pore pressure and sedimentation control the large-scale form of continental margins, how submarine landslides form, and provide strategies for designing stable drilling programs.

Influence of platform and abutment angulation on peri-implant bone. A three-dimensional finite element stress analysis.

PubMed

Martini, Ana Paula; Barros, Rosália Moreira; Júnior, Amilcar Chagas Freitas; Rocha, Eduardo Passos; de Almeida, Erika Oliveira; Ferraz, Cacilda Cunha; Pellegrin, Maria Cristina Jimenez; Anchieta, Rodolfo Bruniera

2013-12-01

The aim of this study was to evaluate stress distribution on the peri-implant bone, simulating the influence of Nobel Select implants with straight or angulated abutments on regular and switching platform in the anterior maxilla, by means of 3-dimensional finite element analysis. Four mathematical models of a central incisor supported by external hexagon implant (13 mm × 5 mm) were created varying the platform (R, regular or S, switching) and the abutments (S, straight or A, angulated 15°). The models were created by using Mimics 13 and Solid Works 2010 software programs. The numerical analysis was performed using ANSYS Workbench 10.0. Oblique forces (100 N) were applied to the palatine surface of the central incisor. The bone/implant interface was considered perfectly integrated. Maximum (σmax) and minimum (σmin) principal stress values were obtained. For the cortical bone the highest stress values (σmax) were observed in the RA (regular platform and angulated abutment, 51 MPa), followed by SA (platform switching and angulated abutment, 44.8 MPa), RS (regular platform and straight abutment, 38.6 MPa) and SS (platform switching and straight abutment, 36.5 MPa). For the trabecular bone, the highest stress values (σmax) were observed in the RA (6.55 MPa), followed by RS (5.88 MPa), SA (5.60 MPa), and SS (4.82 MPa). The regular platform generated higher stress in the cervical periimplant region on the cortical and trabecular bone than the platform switching, irrespective of the abutment used (straight or angulated).

The Programming of the Social Brain by Stress During Childhood and Adolescence: From Rodents to Humans.

PubMed

Tzanoulinou, Stamatina; Sandi, Carmen

2017-01-01

The quality and quantity of social experience is fundamental to an individual's health and well-being. Early life stress is known to be an important factor in the programming of the social brain that exerts detrimental effects on social behaviors. The peri-adolescent period, comprising late childhood and adolescence, represents a critical developmental window with regard to the programming effects of stress on the social brain. Here, we discuss social behavior and the physiological and neurobiological consequences of stress during peri-adolescence in the context of rodent paradigms that model human adversity, including social neglect and isolation, social abuse, and exposure to fearful experiences. Furthermore, we discuss peri-adolescent stress as a potent component that influences the social behaviors of individuals in close contact with stressed individuals and that can also influence future generations. We also discuss the temporal dynamics programmed by stress on the social brain and debate whether social behavior alterations are adaptive or maladaptive. By revising the existing literature and defining open questions, we aim to expand the framework in which interactions among peri-adolescent stress, the social brain, and behavior can be better conceptualized.

Biomechanics of cervical tooth region and noncarious cervical lesions of different morphology; three-dimensional finite element analysis

PubMed Central

Jakupović, Selma; Anić, Ivica; Ajanović, Muhamed; Korać, Samra; Konjhodžić, Alma; Džanković, Aida; Vuković, Amra

2016-01-01

Objective: The present study aims to investigate the influence of presence and shape of cervical lesions on biomechanical behavior of mandibular first premolar, subjected to two types of occlusal loading using three-dimensional (3D) finite element method (FEM). Materials and Methods: 3D models of the mandibular premolar are created from a micro computed tomography X-ray image: model of sound mandibular premolar, model with the wedge-shaped cervical lesion (V lesion), and model with saucer-shaped cervical lesion (U lesion). By FEM, straining of the tooth tissues under functional and nonfunctional occlusal loading of 200 (N) is analyzed. For the analysis, the following software was used: CTAn program 1.10 and ANSYS Workbench (version 14.0). The results are presented in von Mises stress. Results: Values of calculated stress in all tooth structures are higher under nonfunctional occlusal loading, while the functional loading is resulted in homogeneous stress distribution. Nonfunctional load in the cervical area of sound tooth model as well as in the sub-superficial layer of the enamel resulted with a significant stress (over 50 [MPa]). The highest stress concentration on models with lesions is noticed on the apex of the V-shaped lesion, while stress in saucer U lesion is significantly lower and distributed over wider area. Conclusion: The type of the occlusal teeth loading has the biggest influence on cervical stress intensity. Geometric shape of the existing lesion is very important in the distribution of internal stress. Compared to the U-shaped lesions, V-shaped lesions show significantly higher stress concentrations under load. Exposure to stress would lead to its progression. PMID:27403064

Design/Analysis of Metal/Composite Bonded Joints for Survivability at Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Bartoszyk, Andrew E.

2004-01-01

A major design and analysis challenge for the JWST ISM structure is the metal/composite bonded joints that will be required to survive down to an operational ultra-low temperature of 30K (-405 F). The initial and current baseline design for the plug-type joint consists of a titanium thin walled fitting (1-3mm thick) bonded to the interior surface of an M555/954-6 composite truss square tube with an axially stiff biased lay-up. Metallic fittings are required at various nodes of the truss structure to accommodate instrument and lift-point bolted interfaces. Analytical experience and design work done on metal/composite bonded joints at temperatures below liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are virtually nonexistent. Increasing the challenge is the difficulty in testing for these required tools and parameters at 30K. A preliminary finite element analysis shows that failure due to CTE mismatch between the biased composite and titanium or aluminum is likely. Failure is less likely with Invar, however an initial mass estimate of Invar fittings demonstrates that Invar is not an automatic alternative. In order to gain confidence in analyzing and designing the ISM joints, a comprehensive joint development testing program has been planned and is currently running. The test program is designed for the correlation of the analysis methodology, including tuning finite element model parameters, and developing a composite failure criterion for the effect of multi-axial composite stresses on the strength of a bonded joint at 30K. The testing program will also consider stress mitigation using compliant composite layers and potential strength degradation due to multiple thermal cycles. Not only will the finite element analysis be correlated to the test data, but the FEA will be used to guide the design of the test. The first phase of the test program has been completed and the preliminary analysis has been revisited based on the test data In this work, we present an overview of the test plan, results today, and resulting design improvements.

The effects of a spiritual learning program on improving spiritual health and clinical practice stress among nursing students.

PubMed

Hsiao, Ya-Chu; Chiang, Hui-Ying; Lee, Hsiang-Chun; Chen, Su-Hui

2012-12-01

Numerous studies have indicated an association between spirituality and health outcomes. However, little information is available about interventions that have been shown to enhance spiritual health and decrease stress. This study examined the effects of a spiritual learning program (SLP) on nursing student-perceived spiritual health and clinical practice stress. A convenience sample of nursing students currently enrolled at a nursing school in northern Taiwan were recruited to participate in this quasiexperimental study as participants to experimental and control groups via simple random sampling. Results from a spiritual health scale and a perceived clinical practice stress scale, together with the score for clinical nursing practice, were compared between the groups. Baseline data were collected from all participants. The experimental group participated in 8 weeks of 50-minute per week SLP, which included lectures, discussion, reflection, and spiritual practices. A second data set was collected from all participants after the intervention. A third data set was collected after all participants had performed 4 weeks of nursing clinical practice. Participants were all women. Average age was 19.4 years (SD = 1.3 years). Generalized estimating equation analysis showed SLP to have a significant short-term effect on improving the total score for spiritual health (p < .01). Significantly greater improvement in clinical practice stress scores was also seen in the experimental group as compared with the control group (all p < .05). The experimental group obtained a higher score of the final clinical practice than the control group (t = 3.771, p < .001). The SLP may encourage participants to see stressors as meaningful events that are connected to individual life purposes. The program developed in this study may be used to improve spiritual health and reduce stress in nursing students' clinical practice. This SLP may be referenced when designing similar spirituality-related courses and applied to nursing student counseling.

Psychological and Social Factors Affecting Internet Searches on Suicide in Korea: A Big Data Analysis of Google Search Trends

PubMed Central

Song, Tae Min; Song, Juyoung; Hayman, Laura L.; Woo, Jong-Min

2014-01-01

Purpose The average mortality rate for death by suicide among OECD countries is 12.8 per 100000, and 33.5 for Korea. The present study analyzed big data extracted from Google to identify factors related to searches on suicide in Korea. Materials and Methods Google search trends for the search words of suicide, stress, exercise, and drinking were obtained for 2004-2010. Analyzing data by month, the relationship between the actual number of suicides and search words per year was examined using multi-level models. Results Both suicide rates and Google searches on suicide in Korea increased since 2007. An unconditional slope model indicated stress and suicide-related searches were positively related. A conditional model showed that factors associated with suicide by year directly affected suicide-related searches. The interaction between stress-related searches and the actual number of suicides was significant. Conclusion A positive relationship between stress- and suicide-related searches further confirmed that stress affects suicide. Taken together and viewed in context of the big data analysis, our results point to the need for a tailored prevention program. Real-time big data can be of use in indicating increases in suicidality when search words such as stress and suicide generate greater numbers of hits on portals and social network sites. PMID:24339315

Heat stress management program improving worker health and operational effectiveness: a case study.

PubMed

Huss, Rosalyn G; Skelton, Scott B; Alvis, Kimberly L; Shane, Leigh A

2013-03-01

Heat stress monitoring is a vital component of an effective health and safety program when employees work in exceptionally warm environments. Workers at hazardous waste sites often wear personal protective equipment (PPE), which increases the body heat stress load. No specific Occupational Safety and Health Administration (OSHA) regulations address heat stress; however, OSHA does provide several guidance documents to assist employers in addressing this serious workplace health hazard. This article describes a heat stress and surveillance plan implemented at a hazardous waste site as part of the overall health and safety program. The PPE requirement for work at this site, coupled with extreme environmental temperatures, made heat stress a significant concern. Occupational health nurses and industrial hygienists developed a monitoring program for heat stress designed to prevent the occurrence of significant heat-related illness in site workers. The program included worker education on the signs of heat-related illness and continuous physiologic monitoring to detect early signs of heat-related health problems. Biological monitoring data were collected before workers entered the exclusion zone and on exiting the zone following decontamination. Sixty-six site workers were monitored throughout site remediation. More than 1,700 biological monitoring data points were recorded. Outcomes included improved worker health and safety, and increased operational effectiveness. Copyright 2013, SLACK Incorporated.

Effects of a brief mindfulness-based intervention program for stress management among medical students: the Mindful-Gym randomized controlled study.

PubMed

Phang, Cheng Kar; Mukhtar, Firdaus; Ibrahim, Normala; Keng, Shian-Ling; Mohd Sidik, Sherina

2015-12-01

Pursuing undergraduate medical training can be very stressful and academically challenging experience. A 5-week mindfulness-based stress management (MBSM/Mindful-Gym) program was developed to help medical students cope with stress. The aim of this study was to evaluate the effectiveness of the intervention in reducing stress among students in a medical school in Malaysia. Seventy-five medical students participated in the program. They were stratified according to years of studies and randomly allocated to intervention (N = 37) and control groups (N = 38). The following outcome variables were measured at pre- and post-intervention: mindfulness (with Mindful Awareness Attention Scale); perceived stress (with Perceived Stress Scale); mental distress (with General Health Questionnaire), and self-efficacy (with General Self-efficacy Scale). Hierarchical multiple regressions were used to analyse the effect of group (intervention vs. control) on changes in the outcome variables. There were significant improvements at one week post-intervention in all outcome variables: mindfulness (β = 0.19, ΔR2 = 0.04, p = .040, f (2) = 0.05), perceived stress (β = -0.26, ΔR2 = 0.07, p = .009, f (2) = 0.10); mental distress (β = -0.28, ΔR2 = 0.10, p = .003, f (2) = 0.15); and self-efficacy (β = 0.30, ΔR2 = 0.09, p < .001, f (2) = 0.21). Six months after the intervention, those who had joined the program reported higher self-efficacy compared to those in the control group (β = 0.24, ΔR2 = 0.06, p = .020, f (2) = 0.08); but there was no difference in other outcome measures. More than 90% of the participants found the program applicable in helping patients and all reported that they would recommend it to others. This study indicates that the program is potentially an effective stress management program for medical students in Malaysia.

Effects of Laughing Training on Stress Levels in Thai Private Office Workers.

PubMed

Chuchuen, Uayart; Pampiansil, Pornphun; Busarakumtragul, Panaree

2015-10-01

Laughing is a kind of well known alternative medicine used to treat stressful persons or depressive patients to relax. The laughing program used in this study was initially designed by Thai psychiatrists. It consists of deep diaphragmatic breathing exercises, voice expression, facial expression exercises and aerobic exercises, which are expected to promote good health. To evaluate the effects of the laughing training on stress levels in Thai private office workers. Thirty-eight subjects whose age 25-60 years were recruited to enroll in this program. They were randomly divided into two groups: 20 people for the experimental group and 18 persons for the control group. The experimental subjects participated in laughing program for 3 days/week, 60 minutes/day for 8 consecutive weeks. The program took place from June to July 2013. The level of stress was assessed using the Suanprung stress test-60 (SPST-60). The data were analyzed by descriptive statistics, t-test dependent and t-test independent with p < 0.05 considered significant. After they joined the laughing program, no significant difference was found in the mean scores of the level of stress between the control and experimental groups. However, the sensitivities to the arousal events in the experimental group had a tendency to decrease. Laughing training may be used as a tool to promote better health. There was no significant difference in the stress levels after the program was ended except a decrement tendency in the sensitivities to the arousal events. For further study, duration and intensity of the course may be adjusted for a more effective training program.

PCI fuel failure analysis: a report on a cooperative program undertaken by Pacific Northwest Laboratory and Chalk River Nuclear Laboratories.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohr, C.L.; Pankaskie, P.J.; Heasler, P.G.

Reactor fuel failure data sets in the form of initial power (P/sub i/), final power (P/sub f/), transient increase in power (..delta..P), and burnup (Bu) were obtained for pressurized heavy water reactors (PHWRs), boiling water reactors (BWRs), and pressurized water reactors (PWRs). These data sets were evaluated and used as the basis for developing two predictive fuel failure models, a graphical concept called the PCI-OGRAM, and a nonlinear regression based model called PROFIT. The PCI-OGRAM is an extension of the FUELOGRAM developed by AECL. It is based on a critical threshold concept for stress dependent stress corrosion cracking. The PROFITmore » model, developed at Pacific Northwest Laboratory, is the result of applying standard statistical regression methods to the available PCI fuel failure data and an analysis of the environmental and strain rate dependent stress-strain properties of the Zircaloy cladding.« less

Occupational stress, relaxation therapies, exercise and biofeedback.

PubMed

Stein, Franklin

2001-01-01

Occupational stress is a widespread occurrence in the United States. It is a contributing factor to absenteeism, disease, injury and lowered productivity. In general stress management programs in the work place that include relaxation therapies, exercise, and biofeedback have been shown to reduce the physiological symptoms such as hypertension, and increase job satisfaction and job performance. Strategies to implement a successful stress management program include incorporating the coping activities into one's daily schedule, monitoring one's symptoms and stressors, and being realistic in setting up a schedule that is relevant and attainable. A short form of meditation, daily exercise program and the use of heart rate or thermal biofeedback can be helpful to a worker experiencing occupational stress.

Stress in Portuguese Middle School Transition: A Multilevel Analysis.

PubMed

Coelho, Vítor Alexandre; Romão, Ana Maria

2016-09-23

Transition from elementary to middle school is commonly seen as a period of stress, impacting students' school adjustment. The present longitudinal study aimed to analyze the difference in stress levels between the end of 4th grade and 5th grade, while also analyzing gender differences and 5th grade retention. Two hundred fifty-eight 4th grade students (M age = 9.55; SD = 0.77) from six Portuguese public schools, from the municipality of Torres Vedras, participated in this study. Self-report questionnaires were administered at the end of the 4th and 5th grades, and 5th grade school records were also collected. Results showed that 5th graders present higher levels of Academic Stress (d = .29) and Teacher/Rules Stress (d = .28). Girls had a greater increase of Peer-related Stress with the transition (p < .01). Students who were retained at the end of 5th grade showed higher increases of Teacher/Rules Stress (p < .05). Intervention programs that aim to support the transition from elementary to middle school are needed, in order to reduce the increase of stress levels at 5th grade and to promote a better school adjustment in the first year of middle school.

The Highs and Lows of a Cultural Transition: A Longitudinal Analysis of Sojourner Stress and Adaptation Across 50 Countries

PubMed Central

2015-01-01

The impact of living abroad is a topic that has intrigued researchers for almost a century, if not longer. While many acculturation phenomena have been studied over this time, the development of new research methods and statistical software in recent years means that these can be revisited and examined in a more rigorous manner. In the present study we were able to follow approximately 2,500 intercultural exchange students situated in over 50 different countries worldwide, over time both before and during their travel using online surveys. Advanced statistical analyses were employed to examine the course of sojourners stress and adjustment over time, its antecedents and consequences. By comparing a sojourner sample with a control group of nonsojourning peers we were able to highlight the uniqueness of the sojourn experience in terms of stress variability over time. Using Latent Class Growth Analysis to examine the nature of this variability revealed 5 distinct patterns of change in stress experienced by sojourners over the course of their exchange: a reverse J-curve, inverse U-curve, mild stress, minor relief, and resilience pattern. Antecedent explanatory variables for stress variability were examined using both variable-centered and person-centered analyses and evidence for the role of personality, empathy, cultural adaptation, and coping strategies was found in each case. Lastly, we examined the relationship between stress abroad with behavioral indicators of (mal)adjustment: number of family changes and early termination of the exchange program. PMID:26191963

Work-related stress: A survey of Indian anesthesiologists.

PubMed

Bakshi, Sumitra Ganesh; Divatia, Jigeeshu Vasishtha; Kannan, Sadhana; Myatra, Sheila Nainan

2017-01-01

Work-related stress is common among medical caregivers and concerns all perioperative care providers. Although anesthesiologists are known to experience stress, there are limited Indian data addressing this issue. This survey was conducted among Indian anesthesiologists to determine their awareness about work stress and views regarding prevention programs. A survey questionnaire was distributed to delegates visiting the exhibits at the national anesthesiology conference in 2011. The questionnaire had ten questions on the work pattern, five on work-related stress, nine on opinion regarding the need and willingness to participate in stress-related programs. There were 1178 responders. Forty-three percent were faculty in medical institutions, 26% were residents and 25% were in free-lance practice. Ninety-one percent of participants rated their stress as moderate-extreme. There was a significant correlation between the amount of stress and working for more than 8 h ( P < 0.001), handling high risk patients ( P = 0.002), working on weekends ( P = 0.002), and carrying work back home ( P < 0.001). Forty-one percent of respondents were very satisfied professionally. Seventy-six percent of doctors agreed that the questionnaire had made them think about work stress. Eighty-four percent of participants felt the need for stress management programs and 69% expressed their willingness to participate in the same. The majority of participants rated their stress as moderate-extreme and was higher in anesthesiologists working long hours, over the weekend and those handling high-risk patients. A majority of participants felt the survey made them think about work-related stress and expressed their willingness to participate in stress management programs.

SPALLMAP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sabau, Adrian; Wright, Ian

Boiler tubes in steam power plants experience exfoliation of oxide grown on the inner side of the tubes. In extreme cases, the exfoliation cause significant tube blockages that lead to forced power plant outages. It is thus desired to predict through modeling the propensity of exfoliation events in order to inform power plant operators of possible tube blockages. SpallMap solves for the stress-strain equations in an axisymmetric geometry, tracking the stress/strain evolution during boiler operation including outages at one-location along a boiler tube and compares it with scale damage criteria represented by Armitt diagram. The SPALLMAP code contains modules developedmore » for oxide growth, stress analysis, and classical fracture mechanics correlations by taking into account the following phenomena and features, (a) Non-uniform thermal expansion coefficient of oxides and metal substrates, (b) Plant operation schedule with periodic alternate full-load and partial-load regimes, (c) axisymmetric formulation for cylindrical tubes, (d) Multiple oxide layers, (e) oxide-growth induced stresses, and (f) damage criteria from classical fracture mechanics. The computer program is written in FORTRAN90. Its modular structure was sought for allowing the best flexibility in updating the program by implementing new constitutive equations due to availability of new material property data and/or new physical phenomena.« less

Effectiveness of a Comprehensive Stress Management Program to Reduce Work-Related Stress in a Medium-Sized Enterprise

PubMed Central

2014-01-01

Objectives To assess the effectiveness of a comprehensive workplace stress management program consisting of participatory action-oriented training (PAOT) and individual management. Methods A comprehensive workplace stress management program was conducted in a medium-sized enterprise. The baseline survey was conducted in September 2011, using the Korean Occupational Stress Scale (KOSS) and Worker’s Stress Response Inventory (WSRI). After implementing both organizational and individual level interventions, the follow up evaluation was conducted in November 2011. Results Most of the workers participated in the organizational level PAOT and made Team-based improvement plans. Based on the stress survey, 24 workers were interviewed by a researcher. After the organizational and individual level interventions, there was a reduction of several adverse psychosocial factors and stress responses. In the case of blue-collar workers, psychosocial factors such as the physical environment, job demands, organizational system, lack of rewards, and occupational climate were significantly improved; in the case of white-collar workers, the occupational climate was improved. Conclusions In light of these results, we concluded that the comprehensive stress management program was effective in reducing work-related stress in a short-term period. A persistent long-term follow up is necessary to determine whether the observed effects are maintained over time. Both team-based improvement activities and individual interviews have to be sustainable and complementary to each other under the long-term plan. PMID:24524591

ATLAS, an integrated structural analysis and design system. Volume 3: User's manual, input and execution data

NASA Technical Reports Server (NTRS)

Dreisbach, R. L. (Editor)

1979-01-01

The input data and execution control statements for the ATLAS integrated structural analysis and design system are described. It is operational on the Control Data Corporation (CDC) 6600/CYBER computers in a batch mode or in a time-shared mode via interactive graphic or text terminals. ATLAS is a modular system of computer codes with common executive and data base management components. The system provides an extensive set of general-purpose technical programs with analytical capabilities including stiffness, stress, loads, mass, substructuring, strength design, unsteady aerodynamics, vibration, and flutter analyses. The sequence and mode of execution of selected program modules are controlled via a common user-oriented language.

The effects of compensatory workplace exercises to reduce work-related stress and musculoskeletal pain1

PubMed Central

de Freitas-Swerts, Fabiana Cristina Taubert; Robazzi, Maria Lúcia do Carmo Cruz

2014-01-01

OBJECTIVES: to assess the effect of a compensatory workplace exercise program on workers with the purpose of reducing work-related stress and musculoskeletal pain. METHOD: quasi-experimental research with quantitative analysis of the data, involving 30 administrative workers from a Higher Education Public Institution. For data collection, questionnaires were used to characterize the workers, as well as the Workplace Stress Scale and the Corlett Diagram. The research took place in three stages: first: pre-test with the application of the questionnaires to the subjects; second: Workplace Exercise taking place twice a week, for 15 minutes, during a period of 10 weeks; third: post-test in which the subjects answered the questionnaires again. For data analysis, the descriptive statistics and non-parametric statistics were used through the Wilcoxon Test. RESULTS: work-related stress was present in the assessed workers, but there was no statistically significant reduction in the scores after undergoing Workplace Exercise. However, there was a statistically significant pain reduction in the neck, cervical, upper, middle and lower back, right thigh, left leg, right ankle and feet. CONCLUSION: the Workplace Exercise promoted a significant pain reduction in the spine, but did not result in a significant reduction in the levels of work-related stress. PMID:25296147

Decreasing Stress and Burnout in Nurses: Efficacy of Blended Learning With Stress Management and Resilience Training Program.

PubMed

Magtibay, Donna L; Chesak, Sherry S; Coughlin, Kevin; Sood, Amit

The study's purpose was to assess efficacy of blended learning to decrease stress and burnout among nurses through use of the Stress Management and Resiliency Training (SMART) program. Job-related stress in nurses leads to high rates of burnout, compromises patient care, and costs US healthcare organizations billions of dollars annually. Many mindfulness and resiliency programs are taught in a format that limits nurses' attendance. Consistent with blended learning, participants chose the format that met their learning styles and goals; Web-based, independent reading, facilitated discussions. The end points of mindfulness, resilience, anxiety, stress, happiness, and burnout were measured at baseline, postintervention, and 3-month follow-up to examine within-group differences. Findings showed statistically significant, clinically meaningful decreases in anxiety, stress, and burnout and increases in resilience, happiness, and mindfulness. Results support blended learning using SMART as a strategy to increase access to resiliency training for nursing staff.

Sex differences in prenatal epigenetic programming of stress pathways.

PubMed

Bale, Tracy L

2011-07-01

Maternal stress experience is associated with neurodevelopmental disorders including schizophrenia and autism. Recent studies have examined mechanisms by which changes in the maternal milieu may be transmitted to the developing embryo and potentially translated into programming of the epigenome. Animal models of prenatal stress have identified important sex- and temporal-specific effects on offspring stress responsivity. As dysregulation of stress pathways is a common feature in most neuropsychiatric diseases, molecular and epigenetic analyses at the maternal-embryo interface, especially in the placenta, may provide unique insight into identifying much-needed predictive biomarkers. In addition, as most neurodevelopmental disorders present with a sex bias, examination of sex differences in the inheritance of phenotypic outcomes may pinpoint gene targets and specific windows of vulnerability in neurodevelopment, which have been disrupted. This review discusses the association and possible contributing mechanisms of prenatal stress in programming offspring stress pathway dysregulation and the importance of sex.

Dynamic Analysis of Spur Gear Transmissions (DANST). PC Version 3.00 User Manual

NASA Technical Reports Server (NTRS)

Oswald, Fred B.; Lin, Hsiang Hsi; Delgado, Irebert R.

1996-01-01

DANST is a FORTRAN computer program for static and dynamic analysis of spur gear systems. The program can be used for parametric studies to predict the static transmission error, dynamic load, tooth bending stress and other properties of spur gears as they are influenced by operating speed, torque, stiffness, damping, inertia, and tooth profile. DANST performs geometric modeling and dynamic analysis for low- or high-contact-ratio spur gears. DANST can simulate gear systems with contact ratios ranging from one to three. It was designed to be easy to use and it is extensively documented in several previous reports and by comments in the source code. This report describes installing and using a new PC version of DANST, covers input data requirements and presents examples.

Exploiting parallel computing with limited program changes using a network of microcomputers

NASA Technical Reports Server (NTRS)

Rogers, J. L., Jr.; Sobieszczanski-Sobieski, J.

1985-01-01

Network computing and multiprocessor computers are two discernible trends in parallel processing. The computational behavior of an iterative distributed process in which some subtasks are completed later than others because of an imbalance in computational requirements is of significant interest. The effects of asynchronus processing was studied. A small existing program was converted to perform finite element analysis by distributing substructure analysis over a network of four Apple IIe microcomputers connected to a shared disk, simulating a parallel computer. The substructure analysis uses an iterative, fully stressed, structural resizing procedure. A framework of beams divided into three substructures is used as the finite element model. The effects of asynchronous processing on the convergence of the design variables are determined by not resizing particular substructures on various iterations.

Apollo experience report: The problem of stress-corrosion cracking

NASA Technical Reports Server (NTRS)

Johnson, R. E.

1973-01-01

Stress-corrosion cracking has been the most common cause of structural-material failures in the Apollo Program. The frequency of stress-corrosion cracking has been high and the magnitude of the problem, in terms of hardware lost and time and money expended, has been significant. In this report, the significant Apollo Program experiences with stress-corrosion cracking are discussed. The causes of stress-corrosion cracking and the corrective actions are discussed, in terminology familiar to design engineers and management personnel, to show how stress-corrosion cracking can be prevented.

Procedures for shape optimization of gas turbine disks

NASA Technical Reports Server (NTRS)

Cheu, Tsu-Chien

1989-01-01

Two procedures, the feasible direction method and sequential linear programming, for shape optimization of gas turbine disks are presented. The objective of these procedures is to obtain optimal designs of turbine disks with geometric and stress constraints. The coordinates of the selected points on the disk contours are used as the design variables. Structural weight, stress and their derivatives with respect to the design variables are calculated by an efficient finite element method for design senitivity analysis. Numerical examples of the optimal designs of a disk subjected to thermo-mechanical loadings are presented to illustrate and compare the effectiveness of these two procedures.

Spouse Psychological Well-Being: A Keystone to Military Family Health

PubMed Central

Green, Sara; Nurius, Paula S.; Lester, Patricia

2013-01-01

Understanding predictors of military spouse psychosocial vulnerability informs efforts to assess, identify, and support at-risk spouses and families. In this analysis we test the effects of family stress and strain on military spouse psychological health, using a sample of female civilian spouses (n=161). Regression findings confirm expectations of the significant contribution of family stressors, strain, and resources in explaining variation in spouses' psychological health, controlling for deployment and socioeconomic factors. Identifying the effects of family stress on military spouse psychological health supports the need for family-centered interventions and prevention programs. PMID:24415897

EAC: A program for the error analysis of STAGS results for plates

NASA Technical Reports Server (NTRS)

Sistla, Rajaram; Thurston, Gaylen A.; Bains, Nancy Jane C.

1989-01-01

A computer code is now available for estimating the error in results from the STAGS finite element code for a shell unit consisting of a rectangular orthotropic plate. This memorandum contains basic information about the computer code EAC (Error Analysis and Correction) and describes the connection between the input data for the STAGS shell units and the input data necessary to run the error analysis code. The STAGS code returns a set of nodal displacements and a discrete set of stress resultants; the EAC code returns a continuous solution for displacements and stress resultants. The continuous solution is defined by a set of generalized coordinates computed in EAC. The theory and the assumptions that determine the continuous solution are also outlined in this memorandum. An example of application of the code is presented and instructions on its usage on the Cyber and the VAX machines have been provided.

A numerical formulation and algorithm for limit and shakedown analysis of large-scale elastoplastic structures

NASA Astrophysics Data System (ADS)

Peng, Heng; Liu, Yinghua; Chen, Haofeng

2018-05-01

In this paper, a novel direct method called the stress compensation method (SCM) is proposed for limit and shakedown analysis of large-scale elastoplastic structures. Without needing to solve the specific mathematical programming problem, the SCM is a two-level iterative procedure based on a sequence of linear elastic finite element solutions where the global stiffness matrix is decomposed only once. In the inner loop, the static admissible residual stress field for shakedown analysis is constructed. In the outer loop, a series of decreasing load multipliers are updated to approach to the shakedown limit multiplier by using an efficient and robust iteration control technique, where the static shakedown theorem is adopted. Three numerical examples up to about 140,000 finite element nodes confirm the applicability and efficiency of this method for two-dimensional and three-dimensional elastoplastic structures, with detailed discussions on the convergence and the accuracy of the proposed algorithm.

The stress analysis method for three-dimensional composite materials

NASA Astrophysics Data System (ADS)

Nagai, Kanehiro; Yokoyama, Atsushi; Maekawa, Zen'ichiro; Hamada, Hiroyuki

1994-05-01

This study proposes a stress analysis method for three-dimensionally fiber reinforced composite materials. In this method, the rule-of mixture for composites is successfully applied to 3-D space in which material properties would change 3-dimensionally. The fundamental formulas for Young's modulus, shear modulus, and Poisson's ratio are derived. Also, we discuss a strength estimation and an optimum material design technique for 3-D composite materials. The analysis is executed for a triaxial orthogonally woven fabric, and their results are compared to the experimental data in order to verify the accuracy of this method. The present methodology can be easily understood with basic material mechanics and elementary mathematics, so it enables us to write a computer program of this theory without difficulty. Furthermore, this method can be applied to various types of 3-D composites because of its general-purpose characteristics.

Time-Dependent Material Data Essential for the Durability Analysis of Composite Flywheels Provided by Compressive Experiments

NASA Technical Reports Server (NTRS)

Thesken, John C.; Bowman, Cheryl L.; Arnold, Steven M.

2003-01-01

Successful spaceflight operations require onboard power management systems that reliably achieve mission objectives for a minimal launch weight. Because of their high specific energies and potential for reduced maintenance and logistics, composite flywheels are an attractive alternative to electrochemical batteries. The Rotor Durability Team, which comprises members from the Ohio Aerospace Institute (OAI) and the NASA Glenn Research Center, completed a program of elevated temperature testing at Glenn' s Life Prediction Branch's Fatigue Laboratory. The experiments provided unique design data essential to the safety and durability of flywheel energy storage systems for the International Space Station and other manned spaceflight applications. Analysis of the experimental data (ref. 1) demonstrated that the compressive stress relaxation of composite flywheel rotor material is significantly greater than the commonly available tensile stress relaxation data. Durability analysis of compression preloaded flywheel rotors is required for accurate safe-life predictions for use in the International Space Station.

Simulation of the stress computation in shells

NASA Technical Reports Server (NTRS)

Salama, M.; Utku, S.

1978-01-01

A self-teaching computer program is described, whereby the stresses in thin shells can be computed with good accuracy using the best fit approach. The program is designed for use in interactive game mode to allow the structural engineer to learn about (1) the major sources of difficulties and associated errors in the computation of stresses in thin shells, (2) possible ways to reduce the errors, and (3) trade-off between computational cost and accuracy. Included are derivation of the computational approach, program description, and several examples illustrating the program usage.

Designing of a Fleet-Leader Program for Carbon Composite Overwrapped Pressure Vessels

NASA Technical Reports Server (NTRS)

Murthy, Pappu L.N.; Phoenix, S. Leigh

2009-01-01

Composite Overwrapped Pressure Vessels (COPVs) are often used for storing pressurant gases on board spacecraft when mass saving is a prime requirement. Substantial weight savings can be achieved compared to all metallic pressure vessels. For example, on the space shuttle, replacement of all metallic pressure vessels with Kevlar COPVs resulted in a weight savings of about 30 percent. Mass critical space applications such as the Ares and Orion vehicles are currently being planned to use as many COPVs as possible in place of all-metallic pressure vessels to minimize the overall mass of the vehicle. Due to the fact that overwraps are subjected to sustained loads during long periods of a mission, stress rupture failure is a major concern. It is, therefore, important to ascertain the reliability of these vessels by analysis, since it is practically impossible to show by experimental testing the reliability of flight quality vessels. Also, it is a common practice to set aside flight quality vessels as "fleet leaders" in a test program where these vessels are subjected to slightly accelerated operating conditions so that they lead the actual flight vessels both in time and load. The intention of fleet leaders is to provide advanced warning if there is a serious design flaw in the vessels so that a major disaster in the flight vessels can be averted with advance warning. On the other hand, the accelerating conditions must be not so severe as to be prone to false alarms. The primary focus of the present paper is to provide an analytical basis for designing a viable fleet leader program for carbon COPVs. The analysis is based on a stress rupture behavior model incorporating Weibull statistics and power-law sensitivity of life to fiber stress level.

C++, objected-oriented programming, and astronomical data models

NASA Technical Reports Server (NTRS)

Farris, A.

1992-01-01

Contemporary astronomy is characterized by increasingly complex instruments and observational techniques, higher data collection rates, and large data archives, placing severe stress on software analysis systems. The object-oriented paradigm represents a significant new approach to software design and implementation that holds great promise for dealing with this increased complexity. The basic concepts of this approach will be characterized in contrast to more traditional procedure-oriented approaches. The fundamental features of objected-oriented programming will be discussed from a C++ programming language perspective, using examples familiar to astronomers. This discussion will focus on objects, classes and their relevance to the data type system; the principle of information hiding; and the use of inheritance to implement generalization/specialization relationships. Drawing on the object-oriented approach, features of a new database model to support astronomical data analysis will be presented.

MHOST: An efficient finite element program for inelastic analysis of solids and structures

NASA Technical Reports Server (NTRS)

Nakazawa, S.

1988-01-01

An efficient finite element program for 3-D inelastic analysis of gas turbine hot section components was constructed and validated. A novel mixed iterative solution strategy is derived from the augmented Hu-Washizu variational principle in order to nodally interpolate coordinates, displacements, deformation, strains, stresses and material properties. A series of increasingly sophisticated material models incorporated in MHOST include elasticity, secant plasticity, infinitesimal and finite deformation plasticity, creep and unified viscoplastic constitutive model proposed by Walker. A library of high performance elements is built into this computer program utilizing the concepts of selective reduced integrations and independent strain interpolations. A family of efficient solution algorithms is implemented in MHOST for linear and nonlinear equation solution including the classical Newton-Raphson, modified, quasi and secant Newton methods with optional line search and the conjugate gradient method.

Efficacy of Seren@ctif, a Computer-Based Stress Management Program for Patients With Adjustment Disorder With Anxiety: Protocol for a Controlled Trial.

PubMed

Servant, Dominique; Leterme, Anne-Claire; Barasino, Olivia; Rougegrez, Laure; Duhamel, Alain; Vaiva, Guillaume

2017-10-02

Adjustment disorder with anxiety (ADA) is the most frequent and best characterized stress-related psychiatric disorder. The rationale for prescription of benzodiazepine monotherapy is a public health issue. Cognitive behavioral stress management programs have been studied in many countries. Several reports have shown beyond reasonable doubt their efficiency at reducing perceived stress and anxiety symptoms and improving patient quality of life. Considering the number of people who could benefit from such programs but are unable to access them, self-help programs have been offered. First presented as books, these programs became enriched with computer-based and digital supports. Regrettably, programs for stress management based on cognitive behavioral therapy (CBT), both face-to-face and digital support, have been only minimally evaluated in France. To our knowledge, the Seren@ctif program is the first French language self-help program for stress management using digital supports. The aim of this study is to assess the effectiveness of a 5-week standardized stress management program for reducing anxiety conducted via eLearning (iCBT) or through face-to-face interviews (CBT) with patients suffering from ADA compared with a wait list control group (WLC). These patients seek treatment in a psychiatric unit for anxiety disorders at a university hospital. The primary outcome is change in the State Trait Anxiety Inventory scale trait subscale (STAI-T) between baseline and 2-month visit. This is a multicenter, prospective, open label, randomized controlled study in 3 parallel groups with balanced randomization (1:1:1): computer-based stress management with minimal contact (not fully automated) (group 1), stress management with face-to-face interviews (group 2), and a WLC group that receives usual health care from a general practitioner (group 3). Programs are based on standard CBT principles and include 5 modules in 5 weekly sessions that include the following topics: stress and stress reaction and assessment; deep respiration and relaxation techniques; cognitive restructuring, mindfulness, and acceptance; behavioral skills as problem solving; and time management, healthy behaviors, and emotion regulation. In the Internet-based group, patients have minimal contact with a medical professional before and after every session. In the first session, a flash memory drive is supplied containing videos, audio files, a self-help book portfolio in the form of an eGuide, and log books providing the exercises to be completed between 2 sessions. The patient is encouraged to practice a 20-minute daily exercise 5 or 6 times per week. In the face-to-face group, patients receive the same program from a therapist with 5 weekly sessions without digital support. Interviews and self-assessments were collected face-to-face with the investigator. The feasibility of this program is being tested, and results show good accessibility in terms of acceptance, understanding, and treatment credibility. Results are expected in 2018. To our knowledge, this is the first French study to examine the effectiveness of a computer-based stress management program for patients with ADA. The Seren@ctif program may be useful within the framework of a psychoeducative approach. It could also be advised for people suffering from other diseases related to stress and for people with a clinical level of perceived stress. Clinicaltrials.gov NCT02621775; https://clinicaltrials.gov/ct2/show/NCT02621775 (Archived by WebCite at http://www.webcitation.org/6tQrkPs1u). ©Dominique Servant, Anne-Claire Leterme, Olivia Barasino, Laure Rougegrez, Alain Duhamel, Guillaume Vaiva. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 02.10.2017.

RNA-Seq Transcriptome Profiling of Upland Cotton (Gossypium hirsutum L.) Root Tissue under Water-Deficit Stress

PubMed Central

Bowman, Megan J.; Park, Wonkeun; Bauer, Philip J.; Udall, Joshua A.; Page, Justin T.; Raney, Joshua; Scheffler, Brian E.; Jones, Don. C.; Campbell, B. Todd

2013-01-01

An RNA-Seq experiment was performed using field grown well-watered and naturally rain fed cotton plants to identify differentially expressed transcripts under water-deficit stress. Our work constitutes the first application of the newly published diploid D5 Gossypium raimondii sequence in the study of tetraploid AD1 upland cotton RNA-seq transcriptome analysis. A total of 1,530 transcripts were differentially expressed between well-watered and water-deficit stressed root tissues, in patterns that confirm the accuracy of this technique for future studies in cotton genomics. Additionally, putative sequence based genome localization of differentially expressed transcripts detected A2 genome specific gene expression under water-deficit stress. These data will facilitate efforts to understand the complex responses governing transcriptomic regulatory mechanisms and to identify candidate genes that may benefit applied plant breeding programs. PMID:24324815

Mindfulness in Academia: Considerations for Administrative Preparation

ERIC Educational Resources Information Center

Wells, Caryn M.

2013-01-01

This conceptual paper presents a synthesis of information about the workload stress of educational administrators. Currently, there are few programs designed to assist educational leaders to deal with stress (Hawk & Martin, 2011). Stress reduction programs may include mindfulness, a widely used practice of meditation. Mindfulness is used in…

A program to reduce coronary heart disease risk by altering job stresses. Final Report, 1 Aug. 1971 - 30 Sep. 1973 - Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Campbell, D. B.

1973-01-01

This study reports the design, implementation, and evaluation of a program attempting to reduce job stress by improving person-environment fit with respect to job aspects such as work load, responsibility, and interpersonal relationships. In order to assess the effects of the program, measures of both stress and strain were collected at three points in time--just prior to the program, immediately after the program, and three months after completion of the program. Measures of strain included systolic and diastolic blood pressure, determinations of glucose, cholesterol, and uric acid in the plasma, job satisfaction, and job related self-esteem. The findings were interpreted in light of both program incidents within specific experimental groups and general aspects of the program common to the experimental groups. Additional analyses indicated that both good person-environment fit with respect to participation predicts to good fit with respect to other job aspects over a three month interval and that stress causes strain, rather than the reverse.

Mindfulness Meditation for Adolescent Stress and Well-Being: A Systematic Review of the Literature with Implications for School Health Programs

ERIC Educational Resources Information Center

Erbe, Ryan; Lohrmann, David

2015-01-01

Stress poses one of the biggest threats to the health and well-being of young people. Adolescents are especially vulnerable to the negative effects of stress due to developmental factors. Recently, Mindfulness Meditation (MM) programs have been implemented into both clinical and school-based settings to reduce stress and promote the health of…

Are Stressful Life Events (SLEs) Associated with the Utilization of Substance Use Treatment-Related Services?

PubMed

Cruz-Feliciano, Miguel A; Ferraro, Aimee; Witt Prehn, Angela

2017-03-01

This study described herein explored the association of stressful life events with the utilization of substance use treatment-related services among substance users living in Puerto Rico. A secondary data analysis was conducted using data collected by a research project entitled Puerto Rico Drug Abuse Research Development Program II (PRDARDP II). The study population consisted of 378 individuals from 18 to 35 years of age who were residents of the San Juan metropolitan area and who presented evidence of substance use in the 30 days prior to the interview. The analysis considered demographic data, information on patterns of substance use, substance use treatment history, stressful events, and depression and anxiety symptomatology. As the number of stressful life events increased, substance users were more likely to report having utilized substance use treatment-related services (OR = 1.11, 95% CI [1.06, 1.17], p < 0.001). Relapsing, the inability to afford drugs, and poor working conditions were statistically significant stressful life events associated with the utilization of substance use treatment-related services. Despite the structural limitations associated with access to and with the quality of the services in the substance use treatment-related system of Puerto Rico, findings suggest that stressful life events play a significant role in the utilization of those services. Researchers and clinicians should consider screening for stressful life events in outreach and engagement strategies. At the same time, the assessment of stressful life events should be integrated into the treatment planning stage to support the recovery process of people with substance use disorders.

Improvements in Resilience, Stress, and Somatic Symptoms Following Online Resilience Training

PubMed Central

Smith, Brad; Shatté, Andrew; Perlman, Adam; Siers, Michael; Lynch, Wendy D.

2018-01-01

Objective: To determine if participation in an online resilience program impacts resilience, stress, and somatic symptoms. Methods: Approximately 600 enrollees in the meQuilibrium resilience program received a series of brief, individually prescribed video, and text training modules in a user-friendly format. Regression models tested how time in the program affected change in resilience from baseline and how changes in resilience affected change in stress and reported symptoms. Results: A significant dose–response was detected, where increases in the time spent in training corresponded to greater improvements in resilience. Degree of change in resilience predicted the magnitude of reduction in stress and symptoms. Participants with the lowest resilience level at baseline experienced greater improvements. Conclusion: Interaction with the online resilience training program had a positive effect on resilience, stress, and symptoms in proportion to the time of use. PMID:28820863

"Young women": the meaning of a collaborative program supporting young women's rehabilitation and reintegration into the labor market.

PubMed

Stjernswärd, Sigrid; Bernce, Richard; Östman, Margareta

2013-01-01

Women are at a higher risk for long-term sick leaves and mental ill health. The aim of this study was to explore a supportive program's meaning for women with anxiety/stress/depression problems that are unemployed and/or on a sick leave, and for the personnel involved. Seven women and the personnel (n = 5) were interviewed individually pre- and post-intervention. Data was analyzed using content analysis. The program appeared to provide participants with tools to handle their physical and mental health, and occupational support, improving their social situation. Collaboration between organizations appears to be beneficial for all parties involved.

Virtual Reality Applications for Stress Management Training in the Military.

PubMed

Pallavicini, Federica; Argenton, Luca; Toniazzi, Nicola; Aceti, Luciana; Mantovani, Fabrizia

2016-12-01

Stress Management Training programs are increasingly being adopted in the military field for resilience empowerment and primary stress prevention. In the last several years, advanced technologies (virtual reality in particular) have been integrated in order to develop more innovative and effective stress training programs for military personnel, including soldiers, pilots, and other aircrew professionals. This systematic review describes experimental studies that have been conducted in recent years to test the effectiveness of virtual reality-based Stress Management Training programs developed for military personnel. This promising state-of-the-art technology has the potential to be a successful new approach in empowering soldiers and increasing their resilience to stress. To provide an overview from 2001 to 2016 of the application of virtual reality for Stress Management Training programs developed for the military, a computer-based search for relevant publications was performed in several databases. Databases used in the search were PsycINFO, Web of Science (Web of Knowledge), PubMed, and Medline. The search string was: ("Virtual Reality") AND ("Military") AND ["Stress Training" OR ("Stress Management")]. There were 14 studies that met the inclusion criteria and were included in the review. The main observation to be drawn from this review is that virtual reality can provide interactive Stress Management Training to decrease levels of perceived stress and negative affect in military personnel. This technology appears to be a promising tool for assessing individuals' resilience to stress and for identifying the impact that stress can have on physiological reactivity and performance.Pallavicini F, Argenton L, Toniazzi N, Aceti L, Mantovani F. Virtual realtiy applications for stress management training in the military. Aerosp Med Hum Perform. 2016; 87(12):1021-1030.

Reducing university students' stress through a drop-in canine-therapy program.

PubMed

Binfet, John-Tyler; Passmore, Holli-Anne; Cebry, Alex; Struik, Kathryn; McKay, Carson

2018-06-01

Increasingly colleges and universities are offering canine therapy to help students de-stress as a means of supporting students' emotional health and mental well-being. Despite the popularity of such programs, there remains a dearth of research attesting to their benefits. Participants included 1960 students at a mid-size western Canadian University. The study's aims were to assess the stress-reducing effects of a weekly drop-in, canine-therapy program and to identify how long participants spent with therapy canines to reduce their stress. Demographic information was gathered, length of visit documented and a visual analog scale (VAS) was used to assess entry and exit self-reports of stress. Participants' self-reported stress levels were significantly lower after the canine therapy intervention. Participants spent an average of 35 min per session. This study supports the use of drop-in, canine therapy as a means of reducing university students' stress. The findings hold applied significance for both counseling and animal therapy practitioners regarding the dose intervention participants seek to reduce their stress.

Improved Self-Acceptance, Quality of Life, and Stress Level from Participation in a Worksite Yoga Foundations Program: A Pilot Study.

PubMed

Casey, Lori J; Van Rooy, Kimberly M; Sutherland, Stephanie J; Jenkins, Sarah M; Rosedahl, Jordan K; Wood, Nadia G; Ebbert, Jon O; Lopez-Jimenez, Francisco; Egginton, Jason S; Sim, Leslie A; Clark, Matthew M

2018-03-29

Yoga is increasing in popularity in the United States and across the globe. However, most yoga programs are provided outside the worksite; although many companies offer worksite wellness programs, at present there is limited documentation regarding the potential benefits of participating in a worksite yoga program. Therefore, the purpose of this project was to examine the potential effect of a worksite yoga program on self-acceptance, quality of life, and perceived stress. A prospective cohort pilot study that examined a structured worksite yoga program was designed and tailored to individuals new to yoga. The 8-week Yoga Foundations program was conducted at an academic medical center's worksite wellness center with 86 subjects. Outcome measures were the 36-item Self-Acceptance Scale; a six-item quality-of-life measure that assesses overall, social, mental, physical, emotional, and spiritual well-being; and the ten-item Perceived Stress Scale. Participants demonstrated significant improvement in their overall self-acceptance ( p < 0.001), quality of life ( p < 0.001), and perceived stress ( p ≤ 0.001) levels. They also highly rated the yoga instructors and the weekly format of the program. Participation in a Yoga Foundations program was associated with improvements in self-acceptance, quality of life and stress levels in worksite wellness center members. Future studies should use randomized designs and examine other wellness domains to learn more about the potential benefits of worksite yoga programs.

The impact of an emotional self-management skills course on psychosocial functioning and autonomic recovery to stress in middle school children.

PubMed

McCraty, R; Atkinson, M; Tomasino, D; Goelitz, J; Mayrovitz, H N

1999-01-01

Unmanaged emotional reactions to stress not only lead to behavior problems in young people but also create physiological conditions that inhibit learning and potentially increase the risk of disease later in life. For these reasons, the integration of emotional self-management skills training programs has become an increased priority in some schools. In this study, middle school students enrolled in a course in emotional competence skills learned techniques designed to intercept stressful responses during emotionally challenging situations. Behavioral outcomes were assessed using the Achievement Inventory Measure and autonomic function was measured by heart rate variability (HRV) analysis during and after a stressful interview. Following the program, students exhibited significant improvements in areas including stress and anger management, risky behavior, work management and focus, and relationships with family, peers and teachers. These improvements were sustained over the following six months. Students using the skills taught in the course to recover from acute emotional stress were also able to positively modulate their physiological stress responses. As compared to a control group, trained students demonstrated significantly increased HRV and more rhythmic, sine wave-like heart rhythm patterns during recovery. This response pattern reflects increased parasympathetic activity, heart rhythm coherence, and entrainment of other biological oscillatory systems to the primary heart rhythm frequency. Increased physiological coherence is associated with improved cognitive performance, emotional balance, mental clarity and health outcomes. These physiological shifts could promote the sustained psychological and behavioral improvements associated with the use of emotional management skills. It is suggested that learning emotional competence skills in childhood establishes healthier physiological response patterns which can benefit learning and long-term health. Results provide support for the integration in school curricula of courses designed to teach effective self-management skills to children.

Q3DG: A computer program for strain-energy-release rates for delamination growth in composite laminates

NASA Technical Reports Server (NTRS)

Raju, I. S.

1986-01-01

The Q3DG is a computer program developed to perform a quasi-three-dimensional stress analysis for composite laminates which may contain delaminations. The laminates may be subjected to mechanical, thermal, and hygroscopic loads. The program uses the finite element method and models the laminates with eight-noded parabolic isoparametric elements. The program computes the strain-energy-release components and the total strain-energy release in all three modes for delamination growth. A rectangular mesh and data file generator, DATGEN, is included. The DATGEN program can be executed interactively and is user friendly. The documentation includes sections dealing with the Q3D analysis theory, derivation of element stiffness matrices and consistent load vectors for the parabolic element. Several sample problems with the input for Q3DG and output from the program are included. The capabilities of the DATGEN program are illustrated with examples of interactive sessions. A microfiche of all the examples is included. The Q3DG and DATGEN programs have been implemented on CYBER 170 class computers. Q3DG and DATGEN were developed at the Langley Research Center during the early eighties and documented in 1984 to 1985.

Materials constitutive models for nonlinear analysis of thermally cycled structures

NASA Technical Reports Server (NTRS)

Kaufman, A.; Hunt, L. E.

1982-01-01

Effects of inelastic materials models on computed stress-strain solutions for thermally loaded structures were studied by performing nonlinear (elastoplastic creep) and elastic structural analyses on a prismatic, double edge wedge specimen of IN 100 alloy that was subjected to thermal cycling in fluidized beds. Four incremental plasticity creep models (isotropic, kinematic, combined isotropic kinematic, and combined plus transient creep) were exercised for the problem by using the MARC nonlinear, finite element computer program. Maximum total strain ranges computed from the elastic and nonlinear analyses agreed within 5 percent. Mean cyclic stresses, inelastic strain ranges, and inelastic work were significantly affected by the choice of inelastic constitutive model. The computing time per cycle for the nonlinear analyses was more than five times that required for the elastic analysis.

Engineering design, stress and thermal analysis, and documentation for SATS program

NASA Technical Reports Server (NTRS)

1973-01-01

An in-depth analysis and mechanical design of the solar array stowage and deployment arrangements for use in Small Applications Technology Satellite spacecraft is presented. Alternate approaches for the major elements of work are developed and evaluated. Elements include array stowage and deployment arrangements, the spacecraft and array behavior in the spacecraft despin mode, and the design of the main hinge and segment hinge assemblies. Feasibility calculations are performed and the preferred approach is identified.

STARS: A general-purpose finite element computer program for analysis of engineering structures

NASA Technical Reports Server (NTRS)

Gupta, K. K.

1984-01-01

STARS (Structural Analysis Routines) is primarily an interactive, graphics-oriented, finite-element computer program for analyzing the static, stability, free vibration, and dynamic responses of damped and undamped structures, including rotating systems. The element library consists of one-dimensional (1-D) line elements, two-dimensional (2-D) triangular and quadrilateral shell elements, and three-dimensional (3-D) tetrahedral and hexahedral solid elements. These elements enable the solution of structural problems that include truss, beam, space frame, plane, plate, shell, and solid structures, or any combination thereof. Zero, finite, and interdependent deflection boundary conditions can be implemented by the program. The associated dynamic response analysis capability provides for initial deformation and velocity inputs, whereas the transient excitation may be either forces or accelerations. An effective in-core or out-of-core solution strategy is automatically employed by the program, depending on the size of the problem. Data input may be at random within a data set, and the program offers certain automatic data-generation features. Input data are formatted as an optimal combination of free and fixed formats. Interactive graphics capabilities enable convenient display of nodal deformations, mode shapes, and element stresses.

Stress fluctuations in fracture networks from theoretical and numerical models

NASA Astrophysics Data System (ADS)

Davy, P.; Darcel, C.; Mas Ivars, D.; Le Goc, R.

2017-12-01

We analyze the spatial fluctuations of stress in a simple tridimensional model constituted by a population of disc-shaped fractures embedded in an elastic matrix with uniform and isotropic properties. The fluctuations arise from the classical stress enhancement at fracture tips and stress shadowing around fracture centers that are amplified or decreased by the interactions between close-by fractures. The distribution of local stresses is calculated at the elementary mesh scale with the 3DEC numerical program based on the distinct element method. As expected, the stress distributions vary with fracture density, the larger is the density, the wider is the distribution. For freely slipping fractures, it is mainly controlled by the percolation parameter p (i.e., the total volume of spheres surrounding fractures). For stresses smaller than the remote deviatoric stress, the distribution depends only on for the range of density that has been studied. For large stresses, the distribution decreases exponentially when increasing stress, with a characteristic stress that increases with entailing a widening of the stress distribution. We extend the analysis to fractures with plane resistance defined by an elastic shear stiffness ks and a slip Coulomb threshold. A consequence of the fracture plane resistance is to lower the stress perturbation in the surrounding matrix by a factor that depends on the ratio between ks and a fracture-matrix stiffness km mainly dependent on the ratio between Young modulus and fracture size. km is also the ratio between the remote shear stress and the displacement across the fracture plane in the case of freely slipping fractures. A complete analytical derivation of the expressions of the stress perturbations and of the fracture displacements is obtained and checked with numerical simulations. In the limit ks >> km, the stress perturbation tends to 0 and the stress state is spatially uniform. The analysis allows us to quantify the intensity of the stress fluctuations in fractured rocks as a function of both the fracture network characteristics (density and size distribution), and the mechanical properties (fracture shear stiffness vs matrix elastic properties).

Evaluation of a Stress Management Program in a Child Protection Agency.

ERIC Educational Resources Information Center

Cahill, Janet; Feldman, Lenard H.

High stress levels experienced by child protection workers have been well documented. This study examined the effectiveness of a stress management program in a child protection agency. Subjects were case workers, immediate supervisors, and clerical staff; 320 subjects participated in pretesting and 279 subjects participated in posttesting.…

Stress Map 2.0: Updating the Stress Map of the Western Canadian Sedimentary Basin

NASA Astrophysics Data System (ADS)

Mallyon, D.; Schmitt, D. R.; Currie, C. A.; Gu, Y. J.; Heidbach, O.

2015-12-01

The greatest horizontal compression in much of the Western Canada Sedimentary Basin appears to uniformly trend NE-SW. Beyond this, major gaps remain in our knowledge of stress magnitudes and even faulting regimes. This lack of quantitative information impedes a proper understanding of seismic events that appear to be linked to hydraulic fracturing stimulations. Apart from this immediate concern, such seismicity could impact long term green-house gas sequestration and geothermal energy development. As part of the Helmholtz-Alberta geothermal collaboration, we are developing a program to update this crustal stress state information. The program consists of more immediate studies related to conventional analysis of borehole image logs, core fractures, and transient pressure records as can be made available. Data sets analyzed to date include logs to 3.5 km depth from areas experiencing induced seismicity, from 2.5 km depth within the Precambrian craton in NE Alberta, and to 400 m depth within a large carbonate platform. All these data largely confirm the NE-SW stress directions. In some cases, the configurations of drilling induced tensile fractures and borehole breakouts allow the faulting regime to be constrained. The addition of new seismometers to the region is also allowing for the refinement of earthquake focal mechanisms. Finally, a dramatic contrast in lithosphere thickness, composition and geothermal gradient exists at the contact between the Cordillera and the North American craton; therefore, lithosphere-scale numerical models are also being developed to quantify the relative contribution of geodynamic processes, such as mantle flow and contact geometry, to the observed stress regime within the basin.

Relationship of occupational and non-occupational stress with smoking in automotive industry workers.

PubMed

Hassani, Somayeh; Yazdanparast, Taraneh; Seyedmehdi, Seyed Mohammad; Ghaffari, Mostafa; Attarchi, Mirsaeed; Bahadori, Baharak

2014-01-01

Tobacco use is the second cause of death and first cause of preventable mortality worldwide. Smoking in the workplace is particularly concerning. Smoking-free workplaces decrease the risk of exposure of non-smoking personnel to cigarette smoke. Recent studies have mostly focused on the effect of daily or non-occupational stressors (in comparison with occupational stress) on prevalence of smoking. Occupational stress is often evaluated in workplaces for smoking cessation or control programs, but the role of non-occupational stressors is often disregarded in this respect. This cross-sectional study was conducted in an automobile manufacturing company. The response of automotive industry workers to parts of the validated, reliable, Farsi version of Musculoskeletal Intervention Center (MUSIC)-Norrtalje questionnaire was evaluated. A total of 3,536 factory workers participated in this study. Data were analyzed using SPSS and P<0.05 was considered statistically significant. The correlation of smoking with demographic factors, occupational stressors and life events was evaluated. The results of logistic regression analysis showed that even after adjusting for the confounding factors, cigarette smoking was significantly correlated with age, sex, level of education, job control and life events (P<0.05). The results showed that of occupational and non-occupational stressors, only job control was correlated with cigarette smoking. Non-occupational stressors had greater effect on cigarette smoking. Consideration of both non-occupational and occupational stressors can enhance the success of smoking control programs. On the other hand, a combination of smoking control and stress (occupational and non-occupational) control programs can be more effective than smoking cessation interventions alone.