Development of Instruments and Evaluative Procedures on Contributors to Illness and Health.

PubMed

Cloninger, C Robert; Cloninger, Kevin M

Instruments available for a person-centered assessment of the causes of well-being and ill-being are described. Monitoring at the level of symptoms of illness and past lifestyle behavior has failed to promote change in well-being in a strong and consistent way. Therefore, we illustrate a way of assessing the interactions among multiple aspects of the causes of well-being. For example, at least three distinct aspects of human well-being are known to interact synergistically to promote health - neurobiological plasticity, self-regulatory functioning and virtue. The neglect of any one of the ternary aspects of well-being impedes understanding and treatment of the whole person. Each aspect can be reliably measured using quantitative and qualitative techniques to facilitate treatment planning and analysis of their interactions as a complex adaptive system, although further work is needed to clarify the content and structure of each aspect.

Computational Infrastructure for Engine Structural Performance Simulation

NASA Technical Reports Server (NTRS)

Chamis, Christos C.

1997-01-01

Select computer codes developed over the years to simulate specific aspects of engine structures are described. These codes include blade impact integrated multidisciplinary analysis and optimization, progressive structural fracture, quantification of uncertainties for structural reliability and risk, benefits estimation of new technology insertion and hierarchical simulation of engine structures made from metal matrix and ceramic matrix composites. Collectively these codes constitute a unique infrastructure readiness to credibly evaluate new and future engine structural concepts throughout the development cycle from initial concept, to design and fabrication, to service performance and maintenance and repairs, and to retirement for cause and even to possible recycling. Stated differently, they provide 'virtual' concurrent engineering for engine structures total-life-cycle-cost.

Validation of Clinical Observations of Mastication in Persons with ALS.

PubMed

Simione, Meg; Wilson, Erin M; Yunusova, Yana; Green, Jordan R

2016-06-01

Amyotrophic lateral sclerosis (ALS) is a progressive neurological disease that can result in difficulties with mastication leading to malnutrition, choking or aspiration, and reduced quality of life. When evaluating mastication, clinicians primarily observe spatial and temporal aspects of jaw motion. The reliability and validity of clinical observations for detecting jaw movement abnormalities is unknown. The purpose of this study is to determine the reliability and validity of clinician-based ratings of chewing performance in neuro-typical controls and persons with varying degrees of chewing impairments due to ALS. Adults chewed a solid food consistency while full-face video were recorded along with jaw kinematic data using a 3D optical motion capture system. Five experienced speech-language pathologists watched the videos and rated the spatial and temporal aspects of chewing performance. The jaw kinematic data served as the gold-standard for validating the clinicians' ratings. Results showed that the clinician-based rating of temporal aspects of chewing performance had strong inter-rater reliability and correlated well with comparable kinematic measures. In contrast, the reliability of rating the spatial and spatiotemporal aspects of chewing (i.e., range of motion of the jaw, consistency of the chewing pattern) was mixed. Specifically, ratings of range of motion were at best only moderately reliable. Ratings of chewing movement consistency were reliable but only weakly correlated with comparable measures of jaw kinematics. These findings suggest that clinician ratings of temporal aspects of chewing are appropriate for clinical use, whereas ratings of the spatial and spatiotemporal aspects of chewing may not be reliable or valid.

NERVA nozzle design status report

NASA Technical Reports Server (NTRS)

Williams, J. J.; Pickering, J. L.; Ackerman, R. G.

1972-01-01

The results of the design analyses are presented along with the status of the attained design maturity of the structural elements of the nozzle jacket and various aspects of the coolant passages. The design analyses relating to the nozzle shell were based on design allowables as supported by cursory values obtained from ARMCO 22-13-5 nozzle forgings. The major aspects of the coolant passages considered include: low cycle thermal fatigue, ability to operate at 4500 R gas temperature, tube buckling, and susceptibility to erosion. The scope of the analysis is limited to processes leading to reliability assessments of failure mechanisms.

Developing a novel hierarchical approach for multiscale structural reliability predictions for ultra-high consequence applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Emery, John M.; Coffin, Peter; Robbins, Brian A.

Microstructural variabilities are among the predominant sources of uncertainty in structural performance and reliability. We seek to develop efficient algorithms for multiscale calcu- lations for polycrystalline alloys such as aluminum alloy 6061-T6 in environments where ductile fracture is the dominant failure mode. Our approach employs concurrent multiscale methods, but does not focus on their development. They are a necessary but not sufficient ingredient to multiscale reliability predictions. We have focused on how to efficiently use concurrent models for forward propagation because practical applications cannot include fine-scale details throughout the problem domain due to exorbitant computational demand. Our approach begins withmore » a low-fidelity prediction at the engineering scale that is sub- sequently refined with multiscale simulation. The results presented in this report focus on plasticity and damage at the meso-scale, efforts to expedite Monte Carlo simulation with mi- crostructural considerations, modeling aspects regarding geometric representation of grains and second-phase particles, and contrasting algorithms for scale coupling.« less

Measuring Children's Perceptions of Parental Involvement in Conjoint Behavioral Consultation: Factor Structure and Reliability of the "Parental Support for Learning Scale"

ERIC Educational Resources Information Center

Rogers, Maria; Markel, Clarisa; Midgett, Jonathan D.; Ryan, Bruce A.; Tannock, Rosemary

2014-01-01

Practitioners of Conjoint Behavioral Consultation rely on several sources of information to assist in planning and evaluation of consultation efforts. Parental involvement in the home is an important aspect in Conjoint Behavioral Consultation, yet there are few questionnaires available to practitioners to assess this important construct,…

Evaluating the care of general medicine inpatients: how good is implicit review?

PubMed

Hayward, R A; McMahon, L F; Bernard, A M

1993-04-01

Peer review often consists of implicit evaluations by physician reviewers of the quality and appropriateness of care. This study evaluated the ability of implicit review to measure reliably various aspects of care on a general medicine inpatient service. Retrospective review of patients' charts, using structured implicit review, of a stratified random sample of consecutive admissions to a general medicine ward. A university teaching hospital. Twelve internists were trained in structured implicit review and reviewed 675 patient admissions (with 20% duplicate reviews for a total of 846 reviews). Although inter-rater reliabilities for assessments of overall quality of care and preventable deaths (kappa = 0.5) were adequate for aggregate comparisons (for example, comparing mean ratings on two hospital wards), they were inadequate for reliable evaluations of single patients using one or two reviewers. Reviewers' agreement about most focused quality problems (for example, timeliness of diagnostic evaluation and clinical readiness at time of discharge) and about the appropriateness of hospital ancillary resource use was poor (kappa < or = 0.2). For most focused implicit measures, bias due to specific reviewers who were systematically more harsh or lenient (particularly for evaluation of resource-use appropriateness) accounted for much of the variation in reviewers' assessments, but this was not a substantial problem for the measure of overall quality. Reviewers rarely reported being unable to evaluate the quality of care because of deficiencies in documentation in the patient's chart. For assessment of overall quality and preventable deaths of general medicine inpatients, implicit review by peers had moderate degrees of reliability, but for most other specific aspects of care, physician reviewers could not agree. Implicit review was particularly unreliable at evaluating the appropriateness of hospital resource use and the patient's readiness for discharge, two areas where this type of review is often used.

Assessment of the psychometric properties of the Family Management Measure.

PubMed

Knafl, Kathleen; Deatrick, Janet A; Gallo, Agatha; Dixon, Jane; Grey, Margaret; Knafl, George; O'Malley, Jean

2011-06-01

This paper reports development of the Family Management Measure (FaMM) of parental perceptions of family management of chronic conditions. By telephone interview, 579 parents of children age 3 to 19 with a chronic condition (349 partnered mothers, 165 partners, 65 single mothers) completed the FaMM and measures of child functional status and behavioral problems and family functioning. Analyses addressed reliability, factor structure, and construct validity. Exploratory factor analysis yielded six scales: Child's Daily Life, Condition Management Ability, Condition Management Effort, Family Life Difficulty, Parental Mutuality, and View of Condition Impact. Internal consistency reliability ranged from .72 to .91, and test-retest reliability from .71 to .94. Construct validity was supported by significant correlations in hypothesized directions between FaMM scales and established measures. Results support FaMM's; reliability and validity, indicating it performs in a theoretically meaningful way and taps distinct aspects of family response to childhood chronic conditions.

The relationship between sociosexuality and aspects of body image in men and women: a structural equation modeling approach.

PubMed

Rammsayer, Thomas H; Troche, Stefan J

2013-10-01

The present study investigated the association between individual differences in sociosexual orientation and four aspects of body image in 156 male and 136 female students. While men were characterized by a less restricted sociosexual orientation, higher self-perceived physical attractiveness, and more pronounced self-rated physical assertiveness, women placed more emphasis on accentuation of body presentation. Structural equation modeling revealed significant positive relationships between sociosexual attitudes and physical attractiveness and accentuation of body presentation as well as between sociosexual behavior and physical attractiveness for the total sample. When introducing sex as a grouping variable, the attitudinal and behavioral components of sociosexuality were reliably related to both physical attractiveness and accentuation of body presentation as two aspects of body image in men, but not in women. Furthermore, our findings suggest that accentuation of body presentation represents a goal-directed behavior in men to increase the likelihood of having uncommitted sex but serves additional functions widely unrelated to unrestrictive sociosexual behavior in women.

Reliability of photogrammetry in the evaluation of the postural aspects of individuals with structural scoliosis.

PubMed

Saad, Karen Ruggeri; Colombo, Alexandra Siqueira; Ribeiro, Ana Paula; João, Sílvia Maria Amado

2012-04-01

The purpose of this study was to investigate the reliability of photogrammetry in the measurement of the postural deviations in individuals with idiopathic scoliosis. Twenty participants with scoliosis (17 women and three men), with a mean age of 23.1 ± 9 yrs, were photographed from the posterior and lateral views. The postural aspects were measured with CorelDRAW software. High inter-rater and test-retest reliability indices were found. It was observed that with more severity of scoliosis, greater were the variations between the thoracic kyphosis and lumbar lordosis measures obtained by the same examiner from the left lateral view photographs. A greater body mass index (BMI) was associated with greater variability of the trunk rotation measures obtained by two independent examiners from the right, lateral view (r = 0.656; p = 0.002). The severity of scoliosis was also associated with greater inter-rater variability measures of trunk rotation obtained from the left, lateral view (r = 0.483; p = 0.036). Photogrammetry demonstrated to be a reliable method for the measurement of postural deviations from the posterior and lateral views of individuals with idiopathic scoliosis and could be complementarily employed for the assessment procedures, which could reduce the number of X-rays used for the follow-up assessments of these individuals. Copyright © 2011 Elsevier Ltd. All rights reserved.

International Psychometric Validation of an EORTC Quality of Life Module Measuring Cancer Related Fatigue (EORTC QLQ-FA12).

PubMed

Weis, Joachim; Tomaszewski, Krzysztof A; Hammerlid, Eva; Ignacio Arraras, Juan; Conroy, Thierry; Lanceley, Anne; Schmidt, Heike; Wirtz, Markus; Singer, Susanne; Pinto, Monica; Alm El-Din, Mohamed; Compter, Inge; Holzner, Bernhard; Hofmeister, Dirk; Chie, Wei-Chu; Czeladzki, Marek; Harle, Amelie; Jones, Louise; Ritter, Sabrina; Flechtner, Hans-Henning; Bottomley, Andrew

2017-05-01

The European Organisation for Research and Treatment of Cancer (EORTC) Group has developed a new multidimensional instrument measuring cancer-related fatigue to be used in conjunction with the quality of life core questionnaire (EORTC QLQ-C30). The module EORTC QLQ-FA13 assesses physical, cognitive, and emotional aspects of cancer-related fatigue. The methodology follows the EORTC guidelines for phase IV validation of modules. This paper focuses on the results of the psychometric validation of the factorial structure of the module. For validation and cross-validation confirmatory factor analysis (maximum likelihood estimation), intraclass correlation and Cronbach alpha for internal consistency were employed. The study involved an international multicenter collaboration of 11 European and non-European countries. A total of 946 patients with various tumor diagnoses were enrolled. Based on the confirmatory factor analysis, we could approve the three-dimensional structure of the module. Removing one item and reassigning the factorial mapping of another item resulted in the EORTC QLQ-FA12. For the revised scale, we found evidence supporting good local (indicator reliability ≥ 0.60, factor reliability ≥ 0.82) and global model fit (GFI t1|t2 = 0.965/0.957, CFI t1|t2 = 0.976/0.972, RMSEA t1|t2 = 0.060/0.069) for both measurement points. For each scale, test-retest reliability proved to be very good (intraclass correlation: R t1-t2 = 0.905-0.921) and internal consistency proved to be good to high (Cronbach alpha = .79-.90). Based on the former phase III module, the multidimensional structure was revised as a phase IV module (EORTC FA12) with an improved scale structure. For a comprehensive validation of the EORTC FA12, further aspects of convergent and divergent validity as well as sensitivity to change should be determined. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Design of Water Temperature Control System Based on Single Chip Microcomputer

NASA Astrophysics Data System (ADS)

Tan, Hanhong; Yan, Qiyan

2017-12-01

In this paper, we mainly introduce a multi-function water temperature controller designed with 51 single-chip microcomputer. This controller has automatic and manual water, set the water temperature, real-time display of water and temperature and alarm function, and has a simple structure, high reliability, low cost. The current water temperature controller on the market basically use bimetal temperature control, temperature control accuracy is low, poor reliability, a single function. With the development of microelectronics technology, monolithic microprocessor function is increasing, the price is low, in all aspects of widely used. In the water temperature controller in the application of single-chip, with a simple design, high reliability, easy to expand the advantages of the function. Is based on the appeal background, so this paper focuses on the temperature controller in the intelligent control of the discussion.

Integration of Porogen-Based Low-k Films: Influence of Capping Layer Thickness and Long Thermal Anneals on Low-k Damage and Reliability

NASA Astrophysics Data System (ADS)

De Roest, David; Vereecke, Bart; Huffman, Craig; Heylen, Nancy; Croes, Kristof; Arai, Hirofumi; Takamure, Noboru; Beynet, Julien; Sprey, Hessel; Matsushita, Kiyohiro; Kobayashi, Nobuyoshi; Verdonck, Patrick; Demuynck, Steven; Beyer, Gerald; Tokei, Zsolt; Struyf, Herbert

2010-05-01

This paper discusses integration aspects of a porous low-k film (k ˜2.45) cured with a broadband UV lamp. Different process splits are discussed which could contribute to avoid integration induced damage and improve reliability. The main factor contributing to a successful integration is the presence of a thick (protecting) cap layer partially remaining after chemical mechanical polishing (CMP), which leads to yielding structures with a keff of ˜2.6, a breakdown voltage of ˜6.9 MV/cm and time dependent dielectric breakdown (TDDB) lifetimes in the excess of 100 years. Long thermal anneals restore the k-value but degrade lifetime.

RICOR's new development of a highly reliable integral rotary cooler: engineering and reliability aspects

NASA Astrophysics Data System (ADS)

Filis, Avishai; Pundak, Nachman; Barak, Moshe; Porat, Ze'ev; Jaeger, Mordechai

2011-06-01

The growing demand for EO applications that work around the clock 24hr/7days a week, such as in border surveillance systems, emphasizes the need for a highly reliable cryocooler having increased operational availability and decreased integrated system Life Cycle (ILS) cost. In order to meet this need RICOR has developed a new rotary Stirling cryocooler, model K508N, intended to double the K508's operating MTTF achieving 20,000 operating MTTF hours. The K508N employs RICOR's latest mechanical design technologies such as optimized bearings and greases, bearings preloading, advanced seals, laser welded cold finger and robust design structure with increased natural frequency compared to the K508 model. The cooler enhanced MTTF was demonstrated by a Validation and Verification (V&V) plan comprising analytical means and a comparative accelerated life test between the standard K508 and the K508N models. Particularly, point estimate and confidence interval for the MTTF improvement factor where calculated periodically during and after the test. The (V&V) effort revealed that the K508N meets its MTTF design goal. The paper will focus on the technical and engineering aspects of the new design. In addition it will discuss the market needs and expectations, investigate the reliability data of the present reference K508 model; and report the accelerate life test data and the statistical analysis methodology as well as its underlying assumptions and results.

Software engineering aspects of real-time programming concepts

NASA Astrophysics Data System (ADS)

Schoitsch, Erwin

1986-08-01

Real-time programming is a discipline of great importance not only in process control, but also in fields like communication, office automation, interactive databases, interactive graphics and operating systems development. General concepts of concurrent programming and constructs for process-synchronization are discussed in detail. Tasking and synchronization concepts, methods of process communication, interrupt and timeout handling in systems based on semaphores, signals, conditional critical regions or on real-time languages like Concurrent PASCAL, MODULA, CHILL and ADA are explained and compared with each other. The second part deals with structuring and modularization of technical processes to build reliable and maintainable real time systems. Software-quality and software engineering aspects are considered throughout the paper.

A confirmatory study of the Combined Index of Severity of Fibromyalgia (ICAF*): factorial structure, reliability and sensitivity to change

PubMed Central

2011-01-01

Background Fibromyalgia (FM) is a complex syndrome that affects many aspects of the patients life and it is very difficult to evaluate in clinical practice. A recent study has developed the Combined Index of Severity of Fibromyalgia (ICAF), an instrument that evaluates diverse aspects of FM and offers five indices: emotional, physical, active coping, passive coping and total. The objective of this study is to confirm the structure of the ICAF, check its test-retest reliability, assess its sensitivity to change, and compare the results obtained in a sample of patients with fibromyalgia with another sample of healthy controls. Methods A total of 232 patients took part in the study, 228 women and 4 men, with a mean age of 47.73 years of age (SD = 8.61) and a time of disease evolution since diagnosis of 4.28 years (SD = 4.03). The patients from the FM group completed the ICAF. Between one and two weeks later, they again attended the clinic and complete the 59 items on the ICAF (retest) and immediately afterwards they began treatment (according to daily clinical practice criteria). A sample of healthy subjects was also studied as a control group: 110 people were included (106 women and 4 men) with a mean age of 46.01 years of age (SD = 9.35). The study was conducted in Spain. Results The results obtained suggest that the four-factor model obtained in the previous study adequately fits the data obtained in this study. The test-retest reliability and internal consistency were all significant and show a high degree of correlation for all the factors as well as in overall score. With the exception of the passive coping factor, all the other scores, including the overall score, were sensitive to change after the therapeutic intervention. The ICAF scores of the patients with fibromyalgia compared with those of the control group were markedly different. Conclusions The findings suggest that the ICAF is a valid, reliable, sensitive to change instrument with the added advantage that it offers some additional domains (factors) that provide very valuable information regarding the most delicate aspects of the patient, which must be addressed at the time of treatment in daily clinical practice. PMID:21649886

A confirmatory study of the Combined Index of Severity of Fibromyalgia (ICAF*): factorial structure, reliability and sensitivity to change.

PubMed

Vallejo, Miguel A; Rivera, Javier; Esteve-Vives, Joaquim; Rejas, Javier

2011-06-07

Fibromyalgia (FM) is a complex syndrome that affects many aspects of the patient's life and it is very difficult to evaluate in clinical practice. A recent study has developed the Combined Index of Severity of Fibromyalgia (ICAF), an instrument that evaluates diverse aspects of FM and offers five indices: emotional, physical, active coping, passive coping and total. The objective of this study is to confirm the structure of the ICAF, check its test-retest reliability, assess its sensitivity to change, and compare the results obtained in a sample of patients with fibromyalgia with another sample of healthy controls. A total of 232 patients took part in the study, 228 women and 4 men, with a mean age of 47.73 years of age (SD = 8.61) and a time of disease evolution since diagnosis of 4.28 years (SD = 4.03). The patients from the FM group completed the ICAF. Between one and two weeks later, they again attended the clinic and complete the 59 items on the ICAF (retest) and immediately afterwards they began treatment (according to daily clinical practice criteria). A sample of healthy subjects was also studied as a control group: 110 people were included (106 women and 4 men) with a mean age of 46.01 years of age (SD = 9.35). The study was conducted in Spain. The results obtained suggest that the four-factor model obtained in the previous study adequately fits the data obtained in this study. The test-retest reliability and internal consistency were all significant and show a high degree of correlation for all the factors as well as in overall score. With the exception of the passive coping factor, all the other scores, including the overall score, were sensitive to change after the therapeutic intervention. The ICAF scores of the patients with fibromyalgia compared with those of the control group were markedly different. The findings suggest that the ICAF is a valid, reliable, sensitive to change instrument with the added advantage that it offers some additional domains (factors) that provide very valuable information regarding the most delicate aspects of the patient, which must be addressed at the time of treatment in daily clinical practice.

Single-anchor support and supercritical CO2 drying enable high-precision microfabrication of three-dimensional structures.

PubMed

Maruo, Shoji; Hasegawa, Takuya; Yoshimura, Naoki

2009-11-09

In high-precision two-photon microfabrication of three-dimensional (3-D) polymeric microstructures, supercritical CO(2) drying was employed to reduce surface tension, which tends to cause the collapse of micro/nano structures. Use of supercritical drying allowed high-aspect ratio microstructures, such as micropillars and cantilevers, to be fabricated. We also propose a single-anchor supporting method to eliminate non-uniform shrinkage of polymeric structures otherwise caused by attachment to the substrate. Use of this method permitted frame models such as lattices to be produced without harmful distortion. The combination of supercritical CO(2) drying and the single-anchor supporting method offers reliable high-precision microfabrication of sophisticated, fragile 3-D micro/nano structures.

Validation of the Spanish version of Mackey childbirth satisfaction rating scale.

PubMed

Caballero, Pablo; Delgado-García, Beatriz E; Orts-Cortes, Isabel; Moncho, Joaquin; Pereyra-Zamora, Pamela; Nolasco, Andreu

2016-04-16

The "Mackey Childbirth Satisfaction Rating Scale" (MCSRS) is a complete non-validated scale which includes the most important factors associated with maternal satisfaction. Our primary purpose was to describe the internal structure of the scale and validate the reliability and validity of concept of its Spanish version MCSRS-E. The MCSRS was translated into Spanish, back-translated and adapted to the Spanish population. It was then administered following a pilot test with women who met the study participant requirements. The scale structure was obtained by performing an exploratory factorial analysis using a sample of 304 women. The structures obtained were tested by conducting a confirmatory factorial analysis using a sample of 159 women. To test the validity of concept, the structure factors were correlated with expectations prior to childbirth experiences. McDonald's omegas were calculated for each model to establish the reliability of each factor. The study was carried out at four University Hospitals; Alicante, Elche, Torrevieja and Vinalopo Salud of Elche. The inclusion criteria were women aged 18-45 years old who had just delivered a singleton live baby at 38-42 weeks through vaginal delivery. Women who had difficulty speaking and understanding Spanish were excluded. The process generated 5 different possible internal structures in a nested model more consistent with the theory than other internal structures of the MCSRS applied hitherto. All of them had good levels of validation and reliability. This nested model to explain internal structure of MCSRS-E can accommodate different clinical practice scenarios better than the other structures applied to date, and it is a flexible tool which can be used to identify the aspects that should be changed to improve maternal satisfaction and hence maternal health.

Space debris mitigation - engineering strategies

NASA Astrophysics Data System (ADS)

Taylor, E.; Hammond, M.

The problem of space debris pollution is acknowledged to be of growing concern by space agencies, leading to recent activities in the field of space debris mitigation. A review of the current (and near-future) mitigation guidelines, handbooks, standards and licensing procedures has identified a number of areas where further work is required. In order for space debris mitigation to be implemented in spacecraft manufacture and operation, the authors suggest that debris-related criteria need to become design parameters (following the same process as applied to reliability and radiation). To meet these parameters, spacecraft manufacturers and operators will need processes (supported by design tools and databases and implementation standards). A particular aspect of debris mitigation, as compared with conventional requirements (e.g. radiation and reliability) is the current and near-future national and international regulatory framework and associated liability aspects. A framework for these implementation standards is presented, in addition to results of in-house research and development on design tools and databases (including collision avoidance in GTO and SSTO and evaluation of failure criteria on composite and aluminium structures).

[Validation of the German version of the Vertigo Handicap Questionnaire (VHQ) in patients with vestibular vertigo syndromes or somatoform vertigo and dizziness].

PubMed

Tschan, Regine; Wiltink, Jörg; Best, Christoph; Beutel, Manfred; Dieterich, Marianne; Eckhardt-Henn, Annegret

2010-01-01

The Vertigo Handicap Questionnaire (VHQ) by Yardley (1992) assesses physical and psychosocial impairments of vertigo or dizziness. Our study examines the structure, reliability, and aspects of validity of the German version of the VHQ. 98 vestibular vertigo syndromes vs. 90 patients with somatoform vertigo and dizziness were evaluated with the VHQ, symptom severity (VSS), distress (GSI), anxiety and depression (HADS), catastrophizing beliefs (ACQ), fear of body sensations (BSQ), and quality of life (SF-36). For diagnostic classification detailed clinical neurological, neuro-otological and psychosomatic testing were conducted. Principal components analysis identified two factors, which could be confirmed by confirmatory factor analyses: 'handicapped activity'(VHQ-ACT) and 'anxiety' (VHQ-ANX). The VHQ had good internal consistency (Cronbach's alpha: 0.92). Test-retest reliability was r = 0.80. We noted close relations between the VHQ, the VSS and measures of emotional distress as aspects of good construct validity. Together with the VSS, the VHQ completes a comprehensive diagnostic screening tool for vertigo or dizziness. © Georg Thieme Verlag KG Stuttgart · New York.

Cross-cultural adaptation, validation and factor structure of the Insight Scale for Affective Disorders.

PubMed

de Assis da Silva, Rafael; Mograbi, Daniel C; Camelo, Evelyn V M; Morton, Gregory Duff; Landeira-Fernandez, J; Cheniaux, Elie

2015-06-01

In the last few decades, several tools for studying insight in bipolar disorders have been used. Olaya and colleagues developed the Insight Scale for Affective Disorders (ISAD), which consists of a scale measuring insight through hetero evaluation for patients with mood disorders. The objective of this work is to translate and adapt the original English version of the ISAD to Brazilian Portuguese (ISAD-BR) and to conduct an evaluation of its psychometric properties. Adaptation procedures included translation/back-translation and consultation with a panel of experts. 95 patients with the diagnosis of Type 1 bipolar disorder were evaluated with the final version of the ISAD-BR, which was applied, simultaneously, but independently, by two examiners. Internal consistency and inter-rater reliability were explored and the latent structure of the scale was investigated with principal axis factoring and promax rotation. A second-order factor analysis was conducted to test if the scale had a hierarchical factor structure. The ISAD-BR showed good internal consistency and good inter-rater reliability. The analysis pointed to a four-factor solution of the ISAD-BR: awareness of symptoms associated with activity/energy; awareness of having a disorder; awareness of self-esteem and feelings of pleasure; and awareness of social functioning and relationships. The second order factor analysis indicated a hierarchical factor structure for the ISAD-BR, with the four lower-order factors loading on a single higher-order factor. Insight into bipolar disorder is a multidimensional construct, covering different aspects of the condition and its symptomatology. Nevertheless, insight about activity/energy changes may be a crucial aspect of insight into bipolar disorder. Copyright © 2015 Elsevier B.V. All rights reserved.

A Comprehensive Structural Dynamic Analysis Approach for Multi Mission Earth Entry Vehicle (MMEEV) Development

NASA Technical Reports Server (NTRS)

Perino, Scott; Bayandor, Javid; Siddens, Aaron

2012-01-01

The anticipated NASA Mars Sample Return Mission (MSR) requires a simple and reliable method in which to return collected Martian samples back to earth for scientific analysis. The Multi-Mission Earth Entry Vehicle (MMEEV) is NASA's proposed solution to this MSR requirement. Key aspects of the MMEEV are its reliable and passive operation, energy absorbing foam-composite structure, and modular impact sphere (IS) design. To aid in the development of an EEV design that can be modified for various missions requirements, two fully parametric finite element models were developed. The first model was developed in an explicit finite element code and was designed to evaluate the impact response of the vehicle and payload during the final stage of the vehicle's return to earth. The second model was developed in an explicit code and was designed to evaluate the static and dynamic structural response of the vehicle during launch and reentry. In contrast to most other FE models, built through a Graphical User Interface (GUI) pre-processor, the current model was developed using a coding technique that allows the analyst to quickly change nearly all aspects of the model including: geometric dimensions, material properties, load and boundary conditions, mesh properties, and analysis controls. Using the developed design tool, a full range of proposed designs can quickly be analyzed numerically and thus the design trade space for the EEV can be fully understood. An engineer can then quickly reach the best design for a specific mission and also adapt and optimize the general design for different missions.

Connective stability of nonlinear matrix systems

NASA Technical Reports Server (NTRS)

Siljak, D. D.

1974-01-01

Consideration of stability under structural perturbations of free dynamic systems described by the differential equation dx/dt = A(t,x)x, where the matrix A(t,x) has time-varying nonlinear elements. The concept of 'connective stability' is introduced to study the structural properties of competitive-cooperative nonlinear matrix systems. It is shown that stability reliability in such systems is high and that they remain stable despite time-varying (including 'on-off') interaction among individual agents present in the system. The results obtained can be used to study stability aspects of mathematical models arising in as diverse fields as economics, biology, arms races, and transistor circuits.

Initial empirical analysis of nuclear power plant organization and its effect on safety performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, J.; McLaughlin, S.D.; Osborn, R.N.

This report contains an analysis of the relationship between selected aspects of organizational structure and the safety-related performance of nuclear power plants. The report starts by identifying and operationalizing certain key dimensions of organizational structure that may be expected to be related to plant safety performance. Next, indicators of plant safety performance are created by combining existing performance measures into more reliable indicators. Finally, the indicators of plant safety performance using correlational and discriminant analysis. The overall results show that plants with better developed coordination mechanisms, shorter vertical hierarchies, and a greater number of departments tend to perform more safely.

Assessment of tinnitus-related impairments and disabilities using the German THI-12: sensitivity and stability of the scale over time.

PubMed

Görtelmeyer, Roman; Schmidt, Jürgen; Suckfüll, Markus; Jastreboff, Pawel; Gebauer, Alexander; Krüger, Hagen; Wittmann, Werner

2011-08-01

To evaluate the reliability, dimensionality, predictive validity, construct validity, and sensitivity to change of the THI-12 total and sub-scales as diagnostic aids to describe and quantify tinnitus-evoked reactions and evaluate treatment efficacy. Explorative analysis of the German tinnitus handicap inventory (THI-12) to assess potential sensitivity to tinnitus therapy in placebo-controlled randomized studies. Correlation analysis, including Cronbach's coefficient α and explorative common factor analysis (EFA), was conducted within and between assessments to demonstrate the construct validity, dimensionality, and factorial structure of the THI-12. N = 618 patients suffering from subjective tinnitus who were to be screened to participate in a randomized, placebo-controlled, 16-week, longitudinal study. The THI-12 can reliably diagnose tinnitus-related impairments and disabilities and assess changes over time. The test-retest coefficient for neighboured visits was r > 0.69, the internal consistency of the THI-12 total score was α ≤ 0.79 and α ≤ 0.89 at subsequent visits. Predictability of THI-12 total score and overall variance increased with successive measurements. The three-factorial structure allowed for evaluation of factors that affect aspects of patients' health-related quality of life. The THI-12, with its three-factorial structure, is a simple, reliable, and valid instrument for the diagnosis and assessment of tinnitus and associated impairment over time.

Quantum chemical calculation of the equilibrium structures of small metal atom clusters

NASA Technical Reports Server (NTRS)

Kahn, L. R.

1982-01-01

Metal atom clusters are studied based on the application of ab initio quantum mechanical approaches. Because these large 'molecular' systems pose special practical computational problems in the application of the quantum mechanical methods, there is a special need to find simplifying techniques that do not compromise the reliability of the calculations. Research is therefore directed towards various aspects of the implementation of the effective core potential technique for the removal of the metal atom core electrons from the calculations.

Evaluating reliability of WSN with sleep/wake-up interfering nodes

NASA Astrophysics Data System (ADS)

Distefano, Salvatore

2013-10-01

A wireless sensor network (WSN) (singular and plural of acronyms are spelled the same) is a distributed system composed of autonomous sensor nodes wireless connected and randomly scattered into a geographical area to cooperatively monitor physical or environmental conditions. Adequate techniques and strategies are required to manage a WSN so that it works properly, observing specific quantities and metrics to evaluate the WSN operational conditions. Among them, one of the most important is the reliability. Considering a WSN as a system composed of sensor nodes the system reliability approach can be applied, thus expressing the WSN reliability in terms of its nodes' reliability. More specifically, since often standby power management policies are applied at node level and interferences among nodes may arise, a WSN can be considered as a dynamic system. In this article we therefore consider the WSN reliability evaluation problem from the dynamic system reliability perspective. Static-structural interactions are specified by the WSN topology. Sleep/wake-up standby policies and interferences due to wireless communications can be instead considered as dynamic aspects. Thus, in order to represent and to evaluate the WSN reliability, we use dynamic reliability block diagrams and Petri nets. The proposed technique allows to overcome the limits of Markov models when considering non-linear discharge processes, since they cannot adequately represent the aging processes. In order to demonstrate the effectiveness of the technique, we investigate some specific WSN network topologies, providing guidelines for their representation and evaluation.

Reliability Considerations for the Operation of Large Accelerator User Facilities

DOE PAGES

Willeke, F. J.

2016-01-29

The lecture provides an overview of considerations relevant for achieving highly reliable operation of accelerator based user facilities. The article starts with an overview of statistical reliability formalism which is followed by high reliability design considerations with examples. Finally, the article closes with operational aspects of high reliability such as preventive maintenance and spares inventory.

Allowing for crystalline structure effects in Geant4

DOE PAGES

Bagli, Enrico; Asai, Makoto; Dotti, Andrea; ...

2017-03-24

In recent years, the Geant4 toolkit for the Monte Carlo simulation of radiation with matter has seen large growth in its divers user community. A fundamental aspect of a successful physics experiment is the availability of a reliable and precise simulation code. Geant4 currently does not allow for the simulation of particle interactions with anything other than amorphous matter. To overcome this limitation, the GECO (GEant4 Crystal Objects) project developed a general framework for managing solid-state structures in the Geant4 kernel and validate it against experimental data. As a result, accounting for detailed geometrical structures allows, for example, simulation ofmore » diffraction from crystal planes or the channeling of charged particle.« less

Evaluation of 3D-Jury on CASP7 models.

PubMed

Kaján, László; Rychlewski, Leszek

2007-08-21

3D-Jury, the structure prediction consensus method publicly available in the Meta Server http://meta.bioinfo.pl/, was evaluated using models gathered in the 7th round of the Critical Assessment of Techniques for Protein Structure Prediction (CASP7). 3D-Jury is an automated expert process that generates protein structure meta-predictions from sets of models obtained from partner servers. The performance of 3D-Jury was analysed for three aspects. First, we examined the correlation between the 3D-Jury score and a model quality measure: the number of correctly predicted residues. The 3D-Jury score was shown to correlate significantly with the number of correctly predicted residues, the correlation is good enough to be used for prediction. 3D-Jury was also found to improve upon the competing servers' choice of the best structure model in most cases. The value of the 3D-Jury score as a generic reliability measure was also examined. We found that the 3D-Jury score separates bad models from good models better than the reliability score of the original server in 27 cases and falls short of it in only 5 cases out of a total of 38. We report the release of a new Meta Server feature: instant 3D-Jury scoring of uploaded user models. The 3D-Jury score continues to be a good indicator of structural model quality. It also provides a generic reliability score, especially important for models that were not assigned such by the original server. Individual structure modellers can also benefit from the 3D-Jury scoring system by testing their models in the new instant scoring feature http://meta.bioinfo.pl/compare_your_model_example.pl available in the Meta Server.

Evaluation of 3D-Jury on CASP7 models

PubMed Central

Kaján, László; Rychlewski, Leszek

2007-01-01

Background 3D-Jury, the structure prediction consensus method publicly available in the Meta Server , was evaluated using models gathered in the 7th round of the Critical Assessment of Techniques for Protein Structure Prediction (CASP7). 3D-Jury is an automated expert process that generates protein structure meta-predictions from sets of models obtained from partner servers. Results The performance of 3D-Jury was analysed for three aspects. First, we examined the correlation between the 3D-Jury score and a model quality measure: the number of correctly predicted residues. The 3D-Jury score was shown to correlate significantly with the number of correctly predicted residues, the correlation is good enough to be used for prediction. 3D-Jury was also found to improve upon the competing servers' choice of the best structure model in most cases. The value of the 3D-Jury score as a generic reliability measure was also examined. We found that the 3D-Jury score separates bad models from good models better than the reliability score of the original server in 27 cases and falls short of it in only 5 cases out of a total of 38. We report the release of a new Meta Server feature: instant 3D-Jury scoring of uploaded user models. Conclusion The 3D-Jury score continues to be a good indicator of structural model quality. It also provides a generic reliability score, especially important for models that were not assigned such by the original server. Individual structure modellers can also benefit from the 3D-Jury scoring system by testing their models in the new instant scoring feature available in the Meta Server. PMID:17711571

Extending the validity of the Feeding Practices and Structure Questionnaire.

PubMed

Jansen, Elena; Mallan, Kimberley M; Daniels, Lynne A

2015-06-30

Feeding practices are commonly examined as potentially modifiable determinants of children's eating behaviours and weight status. Although a variety of questionnaires exist to assess different feeding aspects, many lack thorough reliability and validity testing. The Feeding Practices and Structure Questionnaire (FPSQ) is a tool designed to measure early feeding practices related to non-responsive feeding and structure of the meal environment. Face validity, factorial validity, internal reliability and cross-sectional correlations with children's eating behaviours have been established in mothers with 2-year-old children. The aim of the present study was to further extend the validity of the FPSQ by examining factorial, construct and predictive validity, and stability. Participants were from the NOURISH randomised controlled trial which evaluated an intervention with first-time mothers designed to promote protective feeding practices. Maternal feeding practices (FP) and child eating behaviours were assessed when children were aged 2 years and 3.7 years (n = 388). Confirmatory Factor analysis, group differences, predictive relationships, and stability were tested. The original 9-factor structure was confirmed when children were aged 3.7 ± 0.3 years. Cronbach's alpha was above the recommended 0.70 cut-off for all factors except Structured Meal Timing, Over Restriction and Distrust in Appetite which were 0.58, 0.67 and 0.66 respectively. Allocated group differences reflected behaviour consistent with intervention content and all feeding practices were stable across both time points (range of r = 0.45-0.70). There was some evidence for the predictive validity of factors with 2 FP showing expected relationships, 2 FP showing expected and unexpected relationships and 5 FP showing no relationship. Reliability and validity was demonstrated for most subscales of the FPSQ. Future validation is warranted with culturally diverse samples and with fathers and other caregivers. The use of additional outcomes to further explore predictive validity is recommended as well as testing test-retest reliability of the questionnaire.

Software Reliability 2002

NASA Technical Reports Server (NTRS)

Wallace, Dolores R.

2003-01-01

In FY01 we learned that hardware reliability models need substantial changes to account for differences in software, thus making software reliability measurements more effective, accurate, and easier to apply. These reliability models are generally based on familiar distributions or parametric methods. An obvious question is 'What new statistical and probability models can be developed using non-parametric and distribution-free methods instead of the traditional parametric method?" Two approaches to software reliability engineering appear somewhat promising. The first study, begin in FY01, is based in hardware reliability, a very well established science that has many aspects that can be applied to software. This research effort has investigated mathematical aspects of hardware reliability and has identified those applicable to software. Currently the research effort is applying and testing these approaches to software reliability measurement, These parametric models require much project data that may be difficult to apply and interpret. Projects at GSFC are often complex in both technology and schedules. Assessing and estimating reliability of the final system is extremely difficult when various subsystems are tested and completed long before others. Parametric and distribution free techniques may offer a new and accurate way of modeling failure time and other project data to provide earlier and more accurate estimates of system reliability.

Home Lighting Assessment for Clients With Low Vision

PubMed Central

Bhorade, Anjali; Gordon, Mae; Hollingsworth, Holly; Engsberg, Jack E.; Baum, M. Carolyn

2013-01-01

OBJECTIVE. The goal was to develop an objective, comprehensive, near-task home lighting assessment for older adults with low vision. METHOD. A home lighting assessment was developed and tested with older adults with low vision. Interrater and test–retest reliability studies were conducted. Clinical utility was assessed by occupational therapists with expertise in low vision rehabilitation. RESULTS. Interrater reliability was high (intraclass correlation coefficient [ICC] = .83–1.0). Test–retest reliability was moderate (ICC = .67). Responses to a Clinical Utility Feedback Form developed for this study indicated that the Home Environment Lighting Assessment (HELA) has strong clinical utility. CONCLUSION. The HELA provides a structured tool to describe the quantitative and qualitative aspects of home lighting environments where near tasks are performed and can be used to plan lighting interventions. The HELA has the potential to affect assessment and intervention practices of rehabilitation professionals in the area of low vision and improve near-task performance of people with low vision. PMID:24195901

Aspects of structural health and condition monitoring of offshore wind turbines

PubMed Central

Antoniadou, I.; Dervilis, N.; Papatheou, E.; Maguire, A. E.; Worden, K.

2015-01-01

Wind power has expanded significantly over the past years, although reliability of wind turbine systems, especially of offshore wind turbines, has been many times unsatisfactory in the past. Wind turbine failures are equivalent to crucial financial losses. Therefore, creating and applying strategies that improve the reliability of their components is important for a successful implementation of such systems. Structural health monitoring (SHM) addresses these problems through the monitoring of parameters indicative of the state of the structure examined. Condition monitoring (CM), on the other hand, can be seen as a specialized area of the SHM community that aims at damage detection of, particularly, rotating machinery. The paper is divided into two parts: in the first part, advanced signal processing and machine learning methods are discussed for SHM and CM on wind turbine gearbox and blade damage detection examples. In the second part, an initial exploration of supervisor control and data acquisition systems data of an offshore wind farm is presented, and data-driven approaches are proposed for detecting abnormal behaviour of wind turbines. It is shown that the advanced signal processing methods discussed are effective and that it is important to adopt these SHM strategies in the wind energy sector. PMID:25583864

Aspects of structural health and condition monitoring of offshore wind turbines.

PubMed

Antoniadou, I; Dervilis, N; Papatheou, E; Maguire, A E; Worden, K

2015-02-28

Wind power has expanded significantly over the past years, although reliability of wind turbine systems, especially of offshore wind turbines, has been many times unsatisfactory in the past. Wind turbine failures are equivalent to crucial financial losses. Therefore, creating and applying strategies that improve the reliability of their components is important for a successful implementation of such systems. Structural health monitoring (SHM) addresses these problems through the monitoring of parameters indicative of the state of the structure examined. Condition monitoring (CM), on the other hand, can be seen as a specialized area of the SHM community that aims at damage detection of, particularly, rotating machinery. The paper is divided into two parts: in the first part, advanced signal processing and machine learning methods are discussed for SHM and CM on wind turbine gearbox and blade damage detection examples. In the second part, an initial exploration of supervisor control and data acquisition systems data of an offshore wind farm is presented, and data-driven approaches are proposed for detecting abnormal behaviour of wind turbines. It is shown that the advanced signal processing methods discussed are effective and that it is important to adopt these SHM strategies in the wind energy sector.

A scoring function based on solvation thermodynamics for protein structure prediction

PubMed Central

Du, Shiqiao; Harano, Yuichi; Kinoshita, Masahiro; Sakurai, Minoru

2012-01-01

We predict protein structure using our recently developed free energy function for describing protein stability, which is focused on solvation thermodynamics. The function is combined with the current most reliable sampling methods, i.e., fragment assembly (FA) and comparative modeling (CM). The prediction is tested using 11 small proteins for which high-resolution crystal structures are available. For 8 of these proteins, sequence similarities are found in the database, and the prediction is performed with CM. Fairly accurate models with average Cα root mean square deviation (RMSD) ∼ 2.0 Å are successfully obtained for all cases. For the rest of the target proteins, we perform the prediction following FA protocols. For 2 cases, we obtain predicted models with an RMSD ∼ 3.0 Å as the best-scored structures. For the other case, the RMSD remains larger than 7 Å. For all the 11 target proteins, our scoring function identifies the experimentally determined native structure as the best structure. Starting from the predicted structure, replica exchange molecular dynamics is performed to further refine the structures. However, we are unable to improve its RMSD toward the experimental structure. The exhaustive sampling by coarse-grained normal mode analysis around the native structures reveals that our function has a linear correlation with RMSDs < 3.0 Å. These results suggest that the function is quite reliable for the protein structure prediction while the sampling method remains one of the major limiting factors in it. The aspects through which the methodology could further be improved are discussed. PMID:27493529

Perceived Residential Environment Quality Indicators and neighborhood attachment: A confirmation study on a Chinese sample in Chongqing.

PubMed

Mao, Yanhui; Fornara, Ferdinando; Manca, Sara; Bonnes, Mirilia; Bonaiuto, Marino

2015-09-01

This paper concerns people's assessment of their neighborhood of residence in a Chinese urban context. The aim of the study was to verify the factorial structure and the reliability of two instruments originally developed and validated in Italy (the full versions of the Perceived Residential Environment Quality Indicators [PREQIs] and of the Neighborhood Attachment Scale [NAS]) in a different cultural and linguistic context. The instruments consist of 11 scales measuring the PREQIs and one scale measuring neighborhood attachment (NA). The PREQIs scales include items covering four macroevaluative domains of residential environment quality: architectural and urban planning aspects (three scales: Architectural and Town-planning Space, Organization of Accessibility and Roads, Green Areas), sociorelational aspects (one scale: People and Social Relations), functional aspects (four scales: Welfare Services, Recreational Services, Commercial Services, and Transport Services), and contextual aspects (three scales: Pace of Life, Environmental Health, Upkeep and Care). The PREQIs and NAS were included in a self-report questionnaire, which had been translated and back-translated from English to Chinese, and was then administered to 340 residents in six districts (differing along various features) of a highly urbanized context in China, the city of Chongqing. Results confirmed the factorial structure of the scales and demonstrated good internal consistency of the indicators, thus reaffirming the results of previous studies carried out in Western urban contexts. The indicators tapping the neighborhood's contextual aspects (i.e., pace of life, environmental health, and upkeep) emerged as most correlated to NA. © 2015 The Institute of Psychology, Chinese Academy of Sciences and Wiley Publishing Asia Pty Ltd.

Reliability and validity of the korean version of the connor-davidson resilience scale.

PubMed

Baek, Hyun-Sook; Lee, Kyoung-Uk; Joo, Eun-Jeong; Lee, Mi-Young; Choi, Kyeong-Sook

2010-06-01

The Connor-Davidson Resilience Scale (CD-RISC) measures various aspects of psychological resilience in patients with posttraumatic stress disorder (PTSD) and other psychiatric ailments. This study sought to assess the reliability and validity of the Korean version of the Connor-Davidson Resilience Scale (K-CD-RISC). In total, 576 participants were enrolled (497 females and 79 males), including hospital nurses, university students, and firefighters. Subjects were evaluated using the K-CD-RISC, the Beck Depression Inventory (BDI), the Impact of Event Scale-Revised (IES-R), the Rosenberg Self-Esteem Scale (RSES), and the Perceived Stress Scale (PSS). Test-retest reliability and internal consistency were examined as a measure of reliability, and convergent validity and factor analysis were also performed to evaluate validity. Cronbach's alpha coefficient and test-retest reliability were 0.93 and 0.93, respectively. The total score on the K-CD-RISC was positively correlated with the RSES (r=0.56, p<0.01). Conversely, BDI (r=-0.46, p<0.01), PSS (r=-0.32, p<0.01), and IES-R scores (r=-0.26, p<0.01) were negatively correlated with the K-CD-RISC. The K-CD-RISC showed a five-factor structure that explained 57.2% of the variance. The K-CD-RISC showed good reliability and validity for measurement of resilience among Korean subjects.

Isoquinoline alkaloids and their binding with DNA: calorimetry and thermal analysis applications.

PubMed

Bhadra, Kakali; Kumar, Gopinatha Suresh

2010-11-01

Alkaloids are a group of natural products with unmatched chemical diversity and biological relevance forming potential quality pools in drug screening. The molecular aspects of their interaction with many cellular macromolecules like DNA, RNA and proteins are being currently investigated in order to evolve the structure activity relationship. Isoquinolines constitute an important group of alkaloids. They have extensive utility in cancer therapy and a large volume of data is now emerging in the literature on their mode, mechanism and specificity of binding to DNA. Thermodynamic characterization of the binding of these alkaloids to DNA may offer key insights into the molecular aspects that drive complex formation and these data can provide valuable information about the balance of driving forces. Various thermal techniques have been conveniently used for this purpose and modern calorimetric instrumentation provides direct and quick estimation of thermodynamic parameters. Thermal melting studies and calorimetric techniques like isothermal titration calorimetry and differential scanning calorimetry have further advanced the field by providing authentic, reliable and sensitive data on various aspects of temperature dependent structural analysis of the interaction. In this review we present the application of various thermal techniques, viz. isothermal titration calorimetry, differential scanning calorimetry and optical melting studies in the characterization of drug-DNA interactions with particular emphasis on isoquinoline alkaloid-DNA interaction.

The Subjective Sexual Arousal Scale for Men (SSASM): preliminary development and psychometric validation of a multidimensional measure of subjective male sexual arousal.

PubMed

Althof, Stanley E; Perelman, Michael A; Rosen, Raymond C

2011-08-01

Sexual arousal is a multifaceted process that involves both mental and physical components. No instrument has been developed and validated to assess subjective aspects of male sexual arousal. To develop and psychometrically validate a self-administered scale for assessing subjective male sexual arousal. Using recommendations of the Food and Drug Administration (FDA) guidance on patient-reported outcome instruments, important aspects of male sexual arousal were identified via qualitative research (focus groups and interviews) of U.S. men with erectile dysfunction (ED) and healthy controls. After a preliminary questionnaire was developed by a panel of experts, a quantitative study of men with ED and controls was conducted to psychometrically validate the Subjective Sexual Arousal Scale for Men (SSASM). To develop a male sexual arousal scale and determine its factor structure, reliability, and construct validity. Five aspects of male sexual arousal were identified from the qualitative focus groups and cognitive interviews. Men's preferred language for describing sexual arousal and preferred response formats were incorporated into the questions. Factor analysis of data from the quantitative study of 304 men aged 21 to 70 years identified five domains with eigenvalues >1: sexual performance (six items), mental satisfaction (five items), sexual assertiveness (three items), partner communication (three items), and partner relationship (three items). The five domains had a high degree of internal consistency (Cronbach's alpha values 0.88-0.94). Test-retest reliability over a 2- to 4-week period was high-moderately high (r values 0.75-0.88) for the five domain scores. Correlations between SSASM domain scores and standardized scale scores for social desirability, general health, life satisfaction, and sexual function demonstrated the construct validity of the scale. Preliminary validation data suggest that the 20-item SSASM scale may be useful as a multidimensional, reliable, self-administered instrument for assessing subjective sexual arousal in men of different ages. © 2011 International Society for Sexual Medicine.

Trauma Related Guilt Inventory - psychometric properties of the Polish adaptation (TRGI-PL).

PubMed

Popiel, Agnieszka; Zawadzki, Bogdan

2015-01-01

AIM : Although various aspects of guilt are frequent problems of patients suffering from PTSD, they have been included into the diagnostic criteria for PTSD just in the present version DSM-5. Kubany proposed a cognitive conceptualization of guilt in PTSD followed by development of the Trauma Related Guilt Inventory (TRGI). The aim of the paper is to present psychometric properties of the Polish version of the inventory - the TRGI-PL. A Polish adaptation of the Trauma-Related Guilt Inventory was applied to a sample of 280 motor vehicle (MVA) participants (147 females, 133 males of age from 18 to 80 (M=34,93, SD=13,71) within 1-24 months after a MVA (M=10,18, SD=6,23). Validation of the Polish version was done by analyzing the internal structure of the instrument and comparing the emotional and cognitive aspects of guilt assessed by the TRGI with PTSD symptoms, post-traumatic cognitions and responsibility for MVA and subjective agreement with the judgment. The model with four latent factors: Distress, Hindsight-Bias/Responsibility, Wrongdoing and Insufficient Justification scales showed acceptable fit (Satorra-Bentler chi2=518,62, df=203, p<0,01, RMSEA=0,079, CFI=0,96, GFI=0,97), what confirms the four-factor structure of guilt, obtained in the studies on original TRGI version. Reliability coefficients are similar to original version. Correlations with other PTSD measures showed satisfactory convergent and discriminative validity. The Polish adaptation of the Trauma-Related Guilt Inventory is a reliable and valid tool for assessing guilt as a multidimensional phenomenon, comprising emotional and several cognitive characteristics, in trauma survivors.

Advanced composite structures. [metal matrix composites - structural design criteria for spacecraft construction materials

NASA Technical Reports Server (NTRS)

1974-01-01

A monograph is presented which establishes structural design criteria and recommends practices to ensure the design of sound composite structures, including composite-reinforced metal structures. (It does not discuss design criteria for fiber-glass composites and such advanced composite materials as beryllium wire or sapphire whiskers in a matrix material.) Although the criteria were developed for aircraft applications, they are general enough to be applicable to space vehicles and missiles as well. The monograph covers four broad areas: (1) materials, (2) design, (3) fracture control, and (4) design verification. The materials portion deals with such subjects as material system design, material design levels, and material characterization. The design portion includes panel, shell, and joint design, applied loads, internal loads, design factors, reliability, and maintainability. Fracture control includes such items as stress concentrations, service-life philosophy, and the management plan for control of fracture-related aspects of structural design using composite materials. Design verification discusses ways to prove flightworthiness.

Universal first-order reliability concept applied to semistatic structures

NASA Technical Reports Server (NTRS)

Verderaime, V.

1994-01-01

A reliability design concept was developed for semistatic structures which combines the prevailing deterministic method with the first-order reliability method. The proposed method surmounts deterministic deficiencies in providing uniformly reliable structures and improved safety audits. It supports risk analyses and reliability selection criterion. The method provides a reliability design factor derived from the reliability criterion which is analogous to the current safety factor for sizing structures and verifying reliability response. The universal first-order reliability method should also be applicable for air and surface vehicles semistatic structures.

Universal first-order reliability concept applied to semistatic structures

NASA Astrophysics Data System (ADS)

Verderaime, V.

1994-07-01

A reliability design concept was developed for semistatic structures which combines the prevailing deterministic method with the first-order reliability method. The proposed method surmounts deterministic deficiencies in providing uniformly reliable structures and improved safety audits. It supports risk analyses and reliability selection criterion. The method provides a reliability design factor derived from the reliability criterion which is analogous to the current safety factor for sizing structures and verifying reliability response. The universal first-order reliability method should also be applicable for air and surface vehicles semistatic structures.

Avionics Reliability, Its Techniques and Related Disciplines.

DTIC Science & Technology

1979-10-01

USAF F-16s. C.J.P.Haynes, UK You said that if one of the 5 nations consumes more than its fair share of the combined spares pool then the item manager ... MANAGEMENT OF THE AVIONIC SYSTEM OF A MILITARY STRIKE AIRCRAFT by A.P.White and J.D.Pavier 29 SESSION IV - SOFTWARE RELIABILITY’ INTRODUCTION TO...ASPECT by D.J.Harris 37 SESSION V - AVIONICS LOGISTICS SUPPORT ASPECTS INTEGRATED LOGISTICS SUPPORT ADDS ANOTHER DIMENSION TO MATRIX MANAGEMENT by

Reliability of the Test of Integrated Language and Literacy Skills (TILLS)

ERIC Educational Resources Information Center

Mailend, Marja-Liisa; Plante, Elena; Anderson, Michele A.; Applegate, E. Brooks; Nelson, Nickola W.

2016-01-01

Background: As new standardized tests become commercially available, it is critical that clinicians have access to the information about a test's psychometric properties, including aspects of reliability. Aims: The purpose of the three studies reported in this article was to investigate the reliability of a new test, the Test of Integrated…

Structural integrity and containment aspects of small gas turbine engines

NASA Astrophysics Data System (ADS)

Gupta, S. S.; Gomuc, R.

1994-03-01

Structural integrity of rotating components in gas turbine engines is very crucial since their failure implies high impact energy, which, if uncontained, could mean damage to aircraft structures, controls, and so forth, and, in the worst scenario, even loss of lives. This final consequence has led to very stringent airworthiness regulations for engine/aircraft certifications. This paper discusses the historical statistics of noncontainment events in turbofans, turboprops, and turboshafts and shows how the damage severity varies between different applications and how changes to regulations are continuing in order to improve the reliability of aircraft/rotorcraft. The paper also presents design challenges resulting from the analysis complexity of containment/noncontainment event and the way Pratt & Whitney Canada design/analysis/test system caters to all the requirements. The weight and cost impact of possible changes to current regulations are also presented.

Advances in Micromechanics Modeling of Composites Structures for Structural Health Monitoring

NASA Astrophysics Data System (ADS)

Moncada, Albert

Although high performance, light-weight composites are increasingly being used in applications ranging from aircraft, rotorcraft, weapon systems and ground vehicles, the assurance of structural reliability remains a critical issue. In composites, damage is absorbed through various fracture processes, including fiber failure, matrix cracking and delamination. An important element in achieving reliable composite systems is a strong capability of assessing and inspecting physical damage of critical structural components. Installation of a robust Structural Health Monitoring (SHM) system would be very valuable in detecting the onset of composite failure. A number of major issues still require serious attention in connection with the research and development aspects of sensor-integrated reliable SHM systems for composite structures. In particular, the sensitivity of currently available sensor systems does not allow detection of micro level damage; this limits the capability of data driven SHM systems. As a fundamental layer in SHM, modeling can provide in-depth information on material and structural behavior for sensing and detection, as well as data for learning algorithms. This dissertation focuses on the development of a multiscale analysis framework, which is used to detect various forms of damage in complex composite structures. A generalized method of cells based micromechanics analysis, as implemented in NASA's MAC/GMC code, is used for the micro-level analysis. First, a baseline study of MAC/GMC is performed to determine the governing failure theories that best capture the damage progression. The deficiencies associated with various layups and loading conditions are addressed. In most micromechanics analysis, a representative unit cell (RUC) with a common fiber packing arrangement is used. The effect of variation in this arrangement within the RUC has been studied and results indicate this variation influences the macro-scale effective material properties and failure stresses. The developed model has been used to simulate impact damage in a composite beam and an airfoil structure. The model data was verified through active interrogation using piezoelectric sensors. The multiscale model was further extended to develop a coupled damage and wave attenuation model, which was used to study different damage states such as fiber-matrix debonding in composite structures with surface bonded piezoelectric sensors.

Reusability aspects for space transportation rocket engines: programmatic status and outlook

NASA Astrophysics Data System (ADS)

Preclik, D.; Strunz, R.; Hagemann, G.; Langel, G.

2011-09-01

Rocket propulsion systems belong to the most critical subsystems of a space launch vehicle, being illustrated in this paper by comparing different types of transportation systems. The aspect of reusability is firstly discussed for the space shuttle main engine, the only rocket engine in the world that has demonstrated multiple reuses. Initial projections are contrasted against final reusability achievements summarizing three decades of operating the space shuttle main engine. The discussion is then extended to engines employed on expendable launch vehicles with an operational life requirement typically specifying structural integrities up to 20 cycles (start-ups) and an accumulated burning time of about 6,000 s (Vulcain engine family). Today, this life potential substantially exceeds the duty cycle of an expendable engine. It is actually exploited only during the development and qualification phase of an engine when system reliability is demonstrated on ground test facilities with a reduced number of hardware sets that are subjected to an extended number of test cycles and operation time. The paper will finally evaluate the logic and effort necessary to qualify a reusable engine for a required reliability and put this result in context of possible cost savings realized from reuse operations over a time span of 25 years.

Workplace assessments and functional capacity evaluations: current beliefs of therapists in Australia.

PubMed

Innes, Ev; Straker, Leon

2003-01-01

The purpose of this study was to understand the current beliefs of therapists in Australia, and the strategies they use to address the issues of credibility, reliability, consistency, trustworthiness, validity, generalisability and quality in conducting work-related assessments. In-depth semi-structured interviews were conducted with 26 occupational therapists and physiotherapists from around Australia. Participants expressed the belief that the therapist was the assessment instrument and was central to the credibility of an assessment. Conflict was reported when participants modified standardised assessments in an attempt to focus on context relevant activities and tasks. Participants were aware of the issues of reliability and validity but believed it was not practical to establish these aspects formally in most work-related assessments. The strategies used to achieve credibility, reliability, consistency, trustworthiness, validity, generalisability and quality were similar to those recommended for use in qualitative research. The strategies identified in this study can provide the basis for therapists to examine how they conduct work-related assessments and consider whether they currently use these strategies or have the opportunity to implement others.

Measuring the food and built environments in urban centres: reliability and validity of the EURO-PREVOB Community Questionnaire.

PubMed

Pomerleau, J; Knai, C; Foster, C; Rutter, H; Darmon, N; Derflerova Brazdova, Z; Hadziomeragic, A F; Pekcan, G; Pudule, I; Robertson, A; Brunner, E; Suhrcke, M; Gabrijelcic Blenkus, M; Lhotska, L; Maiani, G; Mistura, L; Lobstein, T; Martin, B W; Elinder, L S; Logstrup, S; Racioppi, F; McKee, M

2013-03-01

The authors designed an instrument to measure objectively aspects of the built and food environments in urban areas, the EURO-PREVOB Community Questionnaire, within the EU-funded project 'Tackling the social and economic determinants of nutrition and physical activity for the prevention of obesity across Europe' (EURO-PREVOB). This paper describes its development, reliability, validity, feasibility and relevance to public health and obesity research. The Community Questionnaire is designed to measure key aspects of the food and built environments in urban areas of varying levels of affluence or deprivation, within different countries. The questionnaire assesses (1) the food environment and (2) the built environment. Pilot tests of the EURO-PREVOB Community Questionnaire were conducted in five to 10 purposively sampled urban areas of different socio-economic status in each of Ankara, Brno, Marseille, Riga, and Sarajevo. Inter-rater reliability was compared between two pairs of fieldworkers in each city centre using three methods: inter-observer agreement (IOA), kappa statistics, and intraclass correlation coefficients (ICCs). Data were collected successfully in all five cities. Overall reliability of the EURO-PREVOB Community Questionnaire was excellent (inter-observer agreement (IOA) > 0.87; intraclass correlation coefficients (ICC)s > 0.91 and kappa statistics > 0.7. However, assessment of certain aspects of the quality of the built environment yielded slightly lower IOA coefficients than the quantitative aspects. The EURO-PREVOB Community Questionnaire was found to be a reliable and practical observational tool for measuring differences in community-level data on environmental factors that can impact on dietary intake and physical activity. The next step is to evaluate its predictive power by collecting behavioural and anthropometric data relevant to obesity and its determinants. Copyright © 2013 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Construct Validity and Reliability of a New Spanish Empathy Questionnaire for Children and Early Adolescents

PubMed Central

Richaud, Maria C.; Lemos, Viviana N.; Mesurado, Belen; Oros, Laura

2017-01-01

Empathy is a basic socio-emotional process of human development that involves the ability to perceive, share, and understand the emotional states of others. This process is essential to successful social functioning. However, despite its significance, empathy has been difficult to define and measure, particularly when incorporating both its emotional and cognitive aspects. The purpose of this study was to develop an Empathy Questionnaire for children aged 9–12 years based on a model of social cognitive neuroscience and to analyze its construct validity and reliability. This questionnaire aimed to integrate the following aspects: emotional contagion, self-other awareness, perspective-taking, emotional regulation, and empathic action. Three studies were conducted. Study 1 evaluated the discriminative power of the items and studied the underlying structure of the instrument using exploratory factor analysis. In Study 2, confirmatory factor analysis was performed to test the model obtained. Finally, the goal of Study 3 was to analyze the convergent and discriminant validity of the questionnaire and the internal consistency of its dimensions. The final version of the instrument contained 15 items that operationalized the previously listed dimensions. The results of the 3 studies indicated that the questionnaire had good validity and reliability. This study has important implications for research and clinical practice. Given its simplicity and brevity, this new self-report scale may work well as a screening method to evaluate the key psychological issues underlying numerous child behaviors that predict the success or failure of social relationships, individual quality of life, and mental well-being. PMID:28659848

Construct Validity and Reliability of a New Spanish Empathy Questionnaire for Children and Early Adolescents.

PubMed

Richaud, Maria C; Lemos, Viviana N; Mesurado, Belen; Oros, Laura

2017-01-01

Empathy is a basic socio-emotional process of human development that involves the ability to perceive, share, and understand the emotional states of others. This process is essential to successful social functioning. However, despite its significance, empathy has been difficult to define and measure, particularly when incorporating both its emotional and cognitive aspects. The purpose of this study was to develop an Empathy Questionnaire for children aged 9-12 years based on a model of social cognitive neuroscience and to analyze its construct validity and reliability. This questionnaire aimed to integrate the following aspects: emotional contagion, self-other awareness, perspective-taking, emotional regulation , and empathic action. Three studies were conducted. Study 1 evaluated the discriminative power of the items and studied the underlying structure of the instrument using exploratory factor analysis. In Study 2, confirmatory factor analysis was performed to test the model obtained. Finally, the goal of Study 3 was to analyze the convergent and discriminant validity of the questionnaire and the internal consistency of its dimensions. The final version of the instrument contained 15 items that operationalized the previously listed dimensions. The results of the 3 studies indicated that the questionnaire had good validity and reliability. This study has important implications for research and clinical practice. Given its simplicity and brevity, this new self-report scale may work well as a screening method to evaluate the key psychological issues underlying numerous child behaviors that predict the success or failure of social relationships, individual quality of life, and mental well-being.

Probabilistic finite elements for fatigue and fracture analysis

NASA Astrophysics Data System (ADS)

Belytschko, Ted; Liu, Wing Kam

1993-04-01

An overview of the probabilistic finite element method (PFEM) developed by the authors and their colleagues in recent years is presented. The primary focus is placed on the development of PFEM for both structural mechanics problems and fracture mechanics problems. The perturbation techniques are used as major tools for the analytical derivation. The following topics are covered: (1) representation and discretization of random fields; (2) development of PFEM for the general linear transient problem and nonlinear elasticity using Hu-Washizu variational principle; (3) computational aspects; (4) discussions of the application of PFEM to the reliability analysis of both brittle fracture and fatigue; and (5) a stochastic computational tool based on stochastic boundary element (SBEM). Results are obtained for the reliability index and corresponding probability of failure for: (1) fatigue crack growth; (2) defect geometry; (3) fatigue parameters; and (4) applied loads. These results show that initial defect is a critical parameter.

Probabilistic finite elements for fatigue and fracture analysis

NASA Technical Reports Server (NTRS)

Belytschko, Ted; Liu, Wing Kam

1993-01-01

An overview of the probabilistic finite element method (PFEM) developed by the authors and their colleagues in recent years is presented. The primary focus is placed on the development of PFEM for both structural mechanics problems and fracture mechanics problems. The perturbation techniques are used as major tools for the analytical derivation. The following topics are covered: (1) representation and discretization of random fields; (2) development of PFEM for the general linear transient problem and nonlinear elasticity using Hu-Washizu variational principle; (3) computational aspects; (4) discussions of the application of PFEM to the reliability analysis of both brittle fracture and fatigue; and (5) a stochastic computational tool based on stochastic boundary element (SBEM). Results are obtained for the reliability index and corresponding probability of failure for: (1) fatigue crack growth; (2) defect geometry; (3) fatigue parameters; and (4) applied loads. These results show that initial defect is a critical parameter.

A Study on the Thermomechanical Reliability Risks of Through-Silicon-Vias in Sensor Applications

PubMed Central

Shao, Shuai; Liu, Dapeng; Niu, Yuling; O’Donnell, Kathy; Sengupta, Dipak; Park, Seungbae

2017-01-01

Reliability risks for two different types of through-silicon-vias (TSVs) are discussed in this paper. The first is a partially-filled copper TSV, if which the copper layer covers the side walls and bottom. A polymer is used to fill the rest of the cavity. Stresses in risk sites are studied and ranked for this TSV structure by FEA modeling. Parametric studies for material properties (modulus and thermal expansion) of TSV polymer are performed. The second type is a high aspect ratio TSV filled by polycrystalline silicon (poly Si). Potential risks of the voids in the poly Si due to filling defects are studied. Fracture mechanics methods are utilized to evaluate the risk for two different assembly conditions: package assembled to printed circuit board (PCB) and package assembled to flexible substrate. The effect of board/substrate/die thickness and the size and location of the void are discussed. PMID:28208758

Reliability and statistical power analysis of cortical and subcortical FreeSurfer metrics in a large sample of healthy elderly.

PubMed

Liem, Franziskus; Mérillat, Susan; Bezzola, Ladina; Hirsiger, Sarah; Philipp, Michel; Madhyastha, Tara; Jäncke, Lutz

2015-03-01

FreeSurfer is a tool to quantify cortical and subcortical brain anatomy automatically and noninvasively. Previous studies have reported reliability and statistical power analyses in relatively small samples or only selected one aspect of brain anatomy. Here, we investigated reliability and statistical power of cortical thickness, surface area, volume, and the volume of subcortical structures in a large sample (N=189) of healthy elderly subjects (64+ years). Reliability (intraclass correlation coefficient) of cortical and subcortical parameters is generally high (cortical: ICCs>0.87, subcortical: ICCs>0.95). Surface-based smoothing increases reliability of cortical thickness maps, while it decreases reliability of cortical surface area and volume. Nevertheless, statistical power of all measures benefits from smoothing. When aiming to detect a 10% difference between groups, the number of subjects required to test effects with sufficient power over the entire cortex varies between cortical measures (cortical thickness: N=39, surface area: N=21, volume: N=81; 10mm smoothing, power=0.8, α=0.05). For subcortical regions this number is between 16 and 76 subjects, depending on the region. We also demonstrate the advantage of within-subject designs over between-subject designs. Furthermore, we publicly provide a tool that allows researchers to perform a priori power analysis and sensitivity analysis to help evaluate previously published studies and to design future studies with sufficient statistical power. Copyright © 2014 Elsevier Inc. All rights reserved.

Validation of an instrument to evaluate health promotion at schools

PubMed Central

Pinto, Raquel Oliveira; Pattussi, Marcos Pascoal; Fontoura, Larissa do Prado; Poletto, Simone; Grapiglia, Valenca Lemes; Balbinot, Alexandre Didó; Teixeira, Vanessa Andina; Horta, Rogério Lessa

2016-01-01

ABSTRACT OBJECTIVE To validate an instrument designed to assess health promotion in the school environment. METHODS A questionnaire, based on guidelines from the World Health Organization and in line with the Brazilian school health context, was developed to validate the research instrument. There were 60 items in the instrument that included 40 questions for the school manager and 20 items with direct observations made by the interviewer. The items’ content validation was performed using the Delphi technique, with the instrument being applied in 53 schools from two medium-sized cities in the South region of Brazil. Reliability (Cronbach’s alpha and split-half) and validity (principal component analysis) analyses were performed. RESULTS The final instrument remained composed of 28 items, distributed into three dimensions: pedagogical, structural and relational. The resulting components showed good factorial loads (> 0.4) and acceptable reliability (> 0.6) for most items. The pedagogical dimension identifies educational activities regarding drugs and sexuality, violence and prejudice, auto care and peace and quality of life. The structural dimension is comprised of access, sanitary structure, and conservation and equipment. The relational dimension includes relationships within the school and with the community. CONCLUSIONS The proposed instrument presents satisfactory validity and reliability values, which include aspects relevant to promote health in schools. Its use allows the description of the health promotion conditions to which students from each educational institution are exposed. Because this instrument includes items directly observed by the investigator, it should only be used during periods when there are full and regular activities at the school in question. PMID:26982958

Factor structure and psychometric properties of the english version of the trier inventory for chronic stress (TICS-E).

PubMed

Petrowski, Katja; Kliem, Sören; Sadler, Michael; Meuret, Alicia E; Ritz, Thomas; Brähler, Elmar

2018-02-06

Demands placed on individuals in occupational and social settings, as well as imbalances in personal traits and resources, can lead to chronic stress. The Trier Inventory for Chronic Stress (TICS) measures chronic stress while incorporating domain-specific aspects, and has been found to be a highly reliable and valid research tool. The aims of the present study were to confirm the German version TICS factorial structure in an English translation of the instrument (TICS-E) and to report its psychometric properties. A random route sample of healthy participants (N = 483) aged 18-30 years completed the TICS-E. The robust maximum likelihood estimation with a mean-adjusted chi-square test statistic was applied due to the sample's significant deviation from the multivariate normal distribution. Goodness of fit, absolute model fit, and relative model fit were assessed by means of the root mean square error of approximation (RMSEA), the Comparative Fit Index (CFI) and the Tucker Lewis Index (TLI). Reliability estimates (Cronbach's α and adjusted split-half reliability) ranged from .84 to .92. Item-scale correlations ranged from .50 to .85. Measures of fit showed values of .052 for RMSEA (Cl = 0.50-.054) and .067 for SRMR for absolute model fit, and values of .846 (TLI) and .855 (CFI) for relative model-fit. Factor loadings ranged from .55 to .91. The psychometric properties and factor structure of the TICS-E are comparable to the German version of the TICS. The instrument therefore meets quality standards for an adequate measurement of chronic stress.

A systematic review of the measurement properties of the Body Image Scale (BIS) in cancer patients.

PubMed

Melissant, Heleen C; Neijenhuijs, Koen I; Jansen, Femke; Aaronson, Neil K; Groenvold, Mogens; Holzner, Bernhard; Terwee, Caroline B; van Uden-Kraan, Cornelia F; Cuijpers, Pim; Verdonck-de Leeuw, Irma M

2018-06-01

Body image is acknowledged as an important aspect of health-related quality of life in cancer patients. The Body Image Scale (BIS) is a patient-reported outcome measure (PROM) to evaluate body image in cancer patients. The aim of this study was to systematically review measurement properties of the BIS among cancer patients. A search in Embase, MEDLINE, PsycINFO, and Web of Science was performed to identify studies that investigated measurement properties of the BIS (Prospero ID 42017057237). Study quality was assessed (excellent, good, fair, poor), and data were extracted and analyzed according to the COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) methodology on structural validity, internal consistency, reliability, measurement error, hypothesis testing for construct validity, and responsiveness. Evidence was categorized into sufficient, insufficient, inconsistent, or indeterminate. Nine studies were included. Evidence was sufficient for structural validity (one factor solution), internal consistency (α = 0.86-0.96), and reliability (r > 0.70); indeterminate for measurement error (information on minimal important change lacked) and responsiveness (increasing body image disturbance in only one study); and inconsistent for hypothesis testing (conflicting results). Quality of the evidence was moderate to low. No studies reported on cross-cultural validity. The BIS is a PROM with good structural validity, internal consistency, and test-retest reliability, but good quality studies on the other measurement properties are needed to optimize evidence. It is recommended to include a wider variety of cancer diagnoses and treatment modalities in these future studies.

Exploring Differences in Measurement and Reporting of Classroom Observation Inter-Rater Reliability

ERIC Educational Resources Information Center

Wilhelm, Anne Garrison; Gillespie Rouse, Amy; Jones, Francesca

2018-01-01

Although inter-rater reliability is an important aspect of using observational instruments, it has received little theoretical attention. In this article, we offer some guidance for practitioners and consumers of classroom observations so that they can make decisions about inter-rater reliability, both for study design and in the reporting of data…

[Risk management--a new aspect of quality assessment in intensive care medicine: first results of an analysis of the DIVI's interdisciplinary quality assessment research group].

PubMed

Stiletto, R; Röthke, M; Schäfer, E; Lefering, R; Waydhas, Ch

2006-10-01

Patient security has become one of the major aspects of clinical management in recent years. The crucial point in research was focused on malpractice. In contradiction to the economic process in non medical fields, the analysis of errors during the in-patient treatment time was neglected. Patient risk management can be defined as a structured procedure in a clinical unit with the aim to reduce harmful events. A risk point model was created based on a Delphi process and founded on the DIVI data register. The risk point model was evaluated in clinically working ICU departments participating in the register data base. The results of the risk point evaluation will be integrated in the next data base update. This might be a step to improve the reliability of the register to measure quality assessment in the ICU.

Thirty years of great ape gestures.

PubMed

Tomasello, Michael; Call, Josep

2018-02-21

We and our colleagues have been doing studies of great ape gestural communication for more than 30 years. Here we attempt to spell out what we have learned. Some aspects of the process have been reliably established by multiple researchers, for example, its intentional structure and its sensitivity to the attentional state of the recipient. Other aspects are more controversial. We argue here that it is a mistake to assimilate great ape gestures to the species-typical displays of other mammals by claiming that they are fixed action patterns, as there are many differences, including the use of attention-getters. It is also a mistake, we argue, to assimilate great ape gestures to human gestures by claiming that they are used referentially and declaratively in a human-like manner, as apes' "pointing" gesture has many limitations and they do not gesture iconically. Great ape gestures constitute a unique form of primate communication with their own unique qualities.

Advanced Stirling Convertor Heater Head Durability and Reliability Quantification

NASA Technical Reports Server (NTRS)

Krause, David L.; Shah, Ashwin R.; Korovaichuk, Igor; Kalluri, Sreeramesh

2008-01-01

The National Aeronautics and Space Administration (NASA) has identified the high efficiency Advanced Stirling Radioisotope Generator (ASRG) as a candidate power source for long duration Science missions, such as lunar applications, Mars rovers, and deep space missions, that require reliable design lifetimes of up to 17 years. Resistance to creep deformation of the MarM-247 heater head (HH), a structurally critical component of the ASRG Advanced Stirling Convertor (ASC), under high temperatures (up to 850 C) is a key design driver for durability. Inherent uncertainties in the creep behavior of the thin-walled HH and the variations in the wall thickness, control temperature, and working gas pressure need to be accounted for in the life and reliability prediction. Due to the availability of very limited test data, assuring life and reliability of the HH is a challenging task. The NASA Glenn Research Center (GRC) has adopted an integrated approach combining available uniaxial MarM-247 material behavior testing, HH benchmark testing and advanced analysis in order to demonstrate the integrity, life and reliability of the HH under expected mission conditions. The proposed paper describes analytical aspects of the deterministic and probabilistic approaches and results. The deterministic approach involves development of the creep constitutive model for the MarM-247 (akin to the Oak Ridge National Laboratory master curve model used previously for Inconel 718 (Special Metals Corporation)) and nonlinear finite element analysis to predict the mean life. The probabilistic approach includes evaluation of the effect of design variable uncertainties in material creep behavior, geometry and operating conditions on life and reliability for the expected life. The sensitivity of the uncertainties in the design variables on the HH reliability is also quantified, and guidelines to improve reliability are discussed.

[Use of the Hospital Anxiety and Depression Scale (HADS) to evaluate anxiety and depression in fibromyalgia patients].

PubMed

Vallejo, Miguel A; Rivera, Javier; Esteve-Vives, Joaquim; Rodríguez-Muñoz, María F

2012-01-01

The HADS is a questionnaire widely used to evaluate anxiety and depression, although its use in fibromyalgia patients has not yet been reported. The aim of this study is to know the usefulness of the HADS to evaluate the emotional aspects related to fibromyalgia patients. This paper studies a sample of 301 fibromyalgia patients. The scientific goodness of the questionnaire is analyzed, and its structure is compared with other models by confirmatory factor analysis. Two external severity indices are used, number of tender points and patient's employment situation. The results show higher levels of anxiety than in other disorders, adequate reliability and a three-factor model with better statistical fit. Nevertheless, this structure was not shown more useful than the two-factor structure for the external criteria studied. The HADS has been shown to be a useful tool for exploring the presence of anxiety and depression in fibromyalgia patients and that the number of tender points does not seem to be related to the severity of the psychological aspects measured by the HADS in our sample, while there does seem to be a correspondence between psychological condition and absence from work. Copyright © 2011 SEP y SEPB. Published by Elsevier Espana. All rights reserved.

Inviting Queer Ideas into the Science Classroom: Studying Sexuality Education from a Queer Perspective

ERIC Educational Resources Information Center

Lundin, Mattias

2014-01-01

Science education has been pointed out as fact-based and built on reliable knowledge. Nevertheless, there are areas that include other aspects. Sexual education is, according to the Swedish syllabus, such an example and it involves aspects as love, sexuality and relations. These aspects suggest a possible tension between the biological and…

Development of KSC program for investigating and generating field failure rates. Volume 1: Summary and overview

NASA Technical Reports Server (NTRS)

Bean, E. E.; Bloomquist, C. E.

1972-01-01

A summary of the KSC program for investigating the reliability aspects of the ground support activities is presented. An analysis of unsatisfactory condition reports (RC), and the generation of reliability assessment of components based on the URC are discussed along with the design considerations for attaining reliable real time hardware/software configurations.

Reliability and criterion validity of an observation protocol for working technique assessments in cash register work.

PubMed

Palm, Peter; Josephson, Malin; Mathiassen, Svend Erik; Kjellberg, Katarina

2016-06-01

We evaluated the intra- and inter-observer reliability and criterion validity of an observation protocol, developed in an iterative process involving practicing ergonomists, for assessment of working technique during cash register work for the purpose of preventing upper extremity symptoms. Two ergonomists independently assessed 17 15-min videos of cash register work on two occasions each, as a basis for examining reliability. Criterion validity was assessed by comparing these assessments with meticulous video-based analyses by researchers. Intra-observer reliability was acceptable (i.e. proportional agreement >0.7 and kappa >0.4) for 10/10 questions. Inter-observer reliability was acceptable for only 3/10 questions. An acceptable inter-observer reliability combined with an acceptable criterion validity was obtained only for one working technique aspect, 'Quality of movements'. Thus, major elements of the cashiers' working technique could not be assessed with an acceptable accuracy from short periods of observations by one observer, such as often desired by practitioners. Practitioner Summary: We examined an observation protocol for assessing working technique in cash register work. It was feasible in use, but inter-observer reliability and criterion validity were generally not acceptable when working technique aspects were assessed from short periods of work. We recommend the protocol to be used for educational purposes only.

Low voltage 30-cm ion thruster development. [including performance and structural integrity (vibration) tests

NASA Technical Reports Server (NTRS)

King, H. J.

1974-01-01

The basic goal was to advance the development status of the 30-cm electron bombardment ion thruster from a laboratory model to a flight-type engineering model (EM) thruster. This advancement included the more conventional aspects of mechanical design and testing for launch loads, weight reduction, fabrication process development, reliability and quality assurance, and interface definition, as well as a relatively significant improvement in thruster total efficiency. The achievement of this goal was demonstrated by the successful completion of a series of performance and structural integrity (vibration) tests. In the course of the program, essentially every part and feature of the original 30-cm Thruster was critically evaluated. These evaluations, led to new or improved designs for the ion optical system, discharge chamber, cathode isolator vaporizer assembly, main isolator vaporizer assembly, neutralizer assembly, packaging for thermal control, electrical terminations and structure.

Microcircuit Reliability Bibliography. Volume 3. 1975 Annual Reference Supplement (Document Numbers 10417-11044)

DTIC Science & Technology

1975-04-01

to 2-16 Category 3: Fabrie’ition Methods and Techniques 3-01 to 3-21 Category 4: ReliabiLity Studies 4-01 to 4-15 Category 5: C,,rputeiized Analysis...RAC icrodrcuit Thesaurus. The ternis are arranged in alphabetical order with sub-term description followinti each main term. Cosvreferencing is...Reliability aspects of vrocircuit manufacturi’. 4. Reliability Studies : Technics) reports !:datig to ;ormal ve isbbty studies and investi- sations

An Approach to Risk-Based Design Incorporating Damage Tolerance Analyses

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Glaessgen, Edward H.; Sleight, David W.

2002-01-01

Incorporating risk-based design as an integral part of spacecraft development is becoming more and more common. Assessment of uncertainties associated with design parameters and environmental aspects such as loading provides increased knowledge of the design and its performance. Results of such studies can contribute to mitigating risk through a system-level assessment. Understanding the risk of an event occurring, the probability of its occurrence, and the consequences of its occurrence can lead to robust, reliable designs. This paper describes an approach to risk-based structural design incorporating damage-tolerance analysis. The application of this approach to a candidate Earth-entry vehicle is described. The emphasis of the paper is on describing an approach for establishing damage-tolerant structural response inputs to a system-level probabilistic risk assessment.

Carrier rockets

NASA Astrophysics Data System (ADS)

Aleksandrov, V. A.; Vladimirov, V. V.; Dmitriev, R. D.; Osipov, S. O.

This book takes into consideration domestic and foreign developments related to launch vehicles. General information concerning launch vehicle systems is presented, taking into account details of rocket structure, basic design considerations, and a number of specific Soviet and American launch vehicles. The basic theory of reaction propulsion is discussed, giving attention to physical foundations, the various types of forces acting on a rocket in flight, basic parameters characterizing rocket motion, the effectiveness of various approaches to obtain the desired velocity, and rocket propellants. Basic questions concerning the classification of launch vehicles are considered along with construction and design considerations, aspects of vehicle control, reliability, construction technology, and details of structural design. Attention is also given to details of rocket motor design, the basic systems of the carrier rocket, and questions of carrier rocket development.

Linguistic methodology for the analysis of aviation accidents

NASA Technical Reports Server (NTRS)

Goguen, J. A.; Linde, C.

1983-01-01

A linguistic method for the analysis of small group discourse, was developed and the use of this method on transcripts of commercial air transpot accidents is demonstrated. The method identifies the discourse types that occur and determine their linguistic structure; it identifies significant linguistic variables based upon these structures or other linguistic concepts such as speech act and topic; it tests hypotheses that support significance and reliability of these variables; and it indicates the implications of the validated hypotheses. These implications fall into three categories: (1) to train crews to use more nearly optimal communication patterns; (2) to use linguistic variables as indices for aspects of crew performance such as attention; and (3) to provide guidelines for the design of aviation procedures and equipment, especially those that involve speech.

Conceptual Design of an In-Space Cryogenic Fluid Management Facility

NASA Technical Reports Server (NTRS)

Willen, G. S.; Riemer, D. H.; Hustvedt, D. C.

1981-01-01

The conceptual design of a Spacelab experiment to develop the technology associated with low gravity propellant management is presented. The proposed facility consisting of a supply tank, receiver tank, pressurization system, instrumentation, and supporting hardware, is described. The experimental objectives, the receiver tank to be modeled, and constraints imposed on the design by the space shuttle, Spacelab, and scaling requirements, are described. The conceptual design, including the general configurations, flow schematics, insulation systems, instrumentation requirements, and internal tank configurations for the supply tank and the receiver tank, is described. Thermal, structural, fluid, and safety and reliability aspects of the facility are analyzed. The facility development plan, including schedule and cost estimates for the facility, is presented. A program work breakdown structure and master program schedule for a seven year program are included.

Barcoding Human Physical Activity to Assess Chronic Pain Conditions

PubMed Central

Paraschiv-Ionescu, Anisoara; Perruchoud, Christophe; Buchser, Eric; Aminian, Kamiar

2012-01-01

Background Modern theories define chronic pain as a multidimensional experience – the result of complex interplay between physiological and psychological factors with significant impact on patients' physical, emotional and social functioning. The development of reliable assessment tools capable of capturing the multidimensional impact of chronic pain has challenged the medical community for decades. A number of validated tools are currently used in clinical practice however they all rely on self-reporting and are therefore inherently subjective. In this study we show that a comprehensive analysis of physical activity (PA) under real life conditions may capture behavioral aspects that may reflect physical and emotional functioning. Methodology PA was monitored during five consecutive days in 60 chronic pain patients and 15 pain-free healthy subjects. To analyze the various aspects of pain-related activity behaviors we defined the concept of PA ‘barcoding’. The main idea was to combine different features of PA (type, intensity, duration) to define various PA states. The temporal sequence of different states was visualized as a ‘barcode’ which indicated that significant information about daily activity can be contained in the amount and variety of PA states, and in the temporal structure of sequence. This information was quantified using complementary measures such as structural complexity metrics (information and sample entropy, Lempel-Ziv complexity), time spent in PA states, and two composite scores, which integrate all measures. The reliability of these measures to characterize chronic pain conditions was assessed by comparing groups of subjects with clinically different pain intensity. Conclusion The defined measures of PA showed good discriminative features. The results suggest that significant information about pain-related functional limitations is captured by the structural complexity of PA barcodes, which decreases when the intensity of pain increases. We conclude that a comprehensive analysis of daily-life PA can provide an objective appraisal of the intensity of pain. PMID:22384191

Columbus safety and reliability

NASA Astrophysics Data System (ADS)

Longhurst, F.; Wessels, H.

1988-10-01

Analyses carried out to ensure Columbus reliability, availability, and maintainability, and operational and design safety are summarized. Failure modes/effects/criticality is the main qualitative tool used. The main aspects studied are fault tolerance, hazard consequence control, risk minimization, human error effects, restorability, and safe-life design.

Reliability of Visual and Somatosensory Feedback in Skilled Movement: The Role of the Cerebellum.

PubMed

Mizelle, J C; Oparah, Alexis; Wheaton, Lewis A

2016-01-01

The integration of vision and somatosensation is required to allow for accurate motor behavior. While both sensory systems contribute to an understanding of the state of the body through continuous updating and estimation, how the brain processes unreliable sensory information remains to be fully understood in the context of complex action. Using functional brain imaging, we sought to understand the role of the cerebellum in weighting visual and somatosensory feedback by selectively reducing the reliability of each sense individually during a tool use task. We broadly hypothesized upregulated activation of the sensorimotor and cerebellar areas during movement with reduced visual reliability, and upregulated activation of occipital brain areas during movement with reduced somatosensory reliability. As specifically compared to reduced somatosensory reliability, we expected greater activations of ipsilateral sensorimotor cerebellum for intact visual and somatosensory reliability. Further, we expected that ipsilateral posterior cognitive cerebellum would be affected with reduced visual reliability. We observed that reduced visual reliability results in a trend towards the relative consolidation of sensorimotor activation and an expansion of cerebellar activation. In contrast, reduced somatosensory reliability was characterized by the absence of cerebellar activations and a trend towards the increase of right frontal, left parietofrontal activation, and temporo-occipital areas. Our findings highlight the role of the cerebellum for specific aspects of skillful motor performance. This has relevance to understanding basic aspects of brain functions underlying sensorimotor integration, and provides a greater understanding of cerebellar function in tool use motor control.

Development of a theory-based questionnaire to assess structure and control in parent feeding (SCPF).

PubMed

Savage, Jennifer S; Rollins, Brandi Y; Kugler, Kari C; Birch, Leann L; Marini, Michele E

2017-01-26

Parents shape children's eating environments and act as powerful socialization agents, impacting young children's behavioral controls of food intake. Most feeding measures assess parents' use of control to manage children's intake of energy dense foods. The Structure and Control in Parent Feeding (SCPF) questionnaire was developed to assess more positive aspects of feeding practices with their young children -setting limits, providing routines-that promote self-regulation, as well as controlling feeding practices. A mixed method approach was used to develop the SCPF. In 2013, cognitive interviews informed the modification, deletion and/or replacement of items. In 2014, the survey was distributed statewide to mothers of toddlers aged 12 to 36 months participating in the Women, Infants, and Children program. In 2016, exploratory factor analyses was conducted to test our theoretical parenting model and content validity and criterion validity were assessed (n = 334). Exploratory factor analysis (EFA) and second-order EFA revealed a 2-factor, 22-item Structure model and a 2-factor, 12-item Control model. Internal consistencies for all factors exceeded 0.70. As predicted, the Structure superfactor was positivity associated with responsiveness, whereas the Control superfactor was positively associated with demandingness on the Caregiver's Feeding Styles Questionnaire. The Structure subscales were also positively associated with mealtime behaviors and Control subscales were positively associated with control-oriented feeding measures from the Control in Parent Feeding Practices questionnaire. The SCPF questionnaire is a reliable tool that can be used to assess aspects of structure- and control-based feeding practices to better understand how parents feed their toddlers.

Study of relationship between the organizational structure and market orientation from the viewpoint of nurse managers.

PubMed

Bahadori, Mohammadkarim; Yaghoubi, Maryam; Javadi, Marzieh; Rahimi, Zahreh Agha

2015-01-01

Considering globalization of health care and quality improvement trend to respond to competition and customer orientation, attention to organizational structure and its relationship with market orientation is essential. Therefore, this study reviews the relationship between organizational structure and market orientation in selected hospitals of Isfahan (Iran). This study was a descriptive survey. The study population comprised nurse managers from selected hospitals (n = 80). Data collection tools were two questionnaires (market orientation questionnaire and organizational structure) that the validity and reliability were confirmed (r = 0.83 for market orientation questionnaire and r = 0.87 for organizational structure). SPSS (Ver. 16) software was used for the analyses. The mean score of organizational structure was 65.4 (11.2) and total mean of market orientation was 51.14 (17.6). All aspects of the organizational structure (Organization Centralization, Formalization in Organization, and Organization Complication) and market orientation (responding to competition, accountability, customer satisfaction, intelligent organization)-except by responding to clients with Formalization in Organization-as well as all aspects of the Systemic attitude (the system of internal coordination and communication systems_ and market orientation (responding to competition, accountability, customer satisfaction, intelligent organization), there was a meaningful relationship (P < 0.05). Market orientation and its dimensions have a significant relationship with organizational structure and can lead managers' view to the analysis and recognizing elements of success and achievement to goals. With increasing competition in markets, globalization of health services, and presence in international markets and more attention to patients' satisfaction, hospitals need to understand and use of market orientation in order to promote quality and services in the health care system.

Study of relationship between the organizational structure and market orientation from the viewpoint of nurse managers

PubMed Central

Bahadori, Mohammadkarim; Yaghoubi, Maryam; Javadi, Marzieh; Rahimi, Zahreh Agha

2015-01-01

Background: Considering globalization of health care and quality improvement trend to respond to competition and customer orientation, attention to organizational structure and its relationship with market orientation is essential. Therefore, this study reviews the relationship between organizational structure and market orientation in selected hospitals of Isfahan (Iran). Materials and Methods: This study was a descriptive survey. The study population comprised nurse managers from selected hospitals (n = 80). Data collection tools were two questionnaires (market orientation questionnaire and organizational structure) that the validity and reliability were confirmed (r = 0.83 for market orientation questionnaire and r = 0.87 for organizational structure). SPSS (Ver. 16) software was used for the analyses. Results: The mean score of organizational structure was 65.4 (11.2) and total mean of market orientation was 51.14 (17.6). All aspects of the organizational structure (Organization Centralization, Formalization in Organization, and Organization Complication) and market orientation (responding to competition, accountability, customer satisfaction, intelligent organization)—except by responding to clients with Formalization in Organization—as well as all aspects of the Systemic attitude (the system of internal coordination and communication systems_ and market orientation (responding to competition, accountability, customer satisfaction, intelligent organization), there was a meaningful relationship (P < 0.05). Conclusion: Market orientation and its dimensions have a significant relationship with organizational structure and can lead managers’ view to the analysis and recognizing elements of success and achievement to goals. With increasing competition in markets, globalization of health services, and presence in international markets and more attention to patients’ satisfaction, hospitals need to understand and use of market orientation in order to promote quality and services in the health care system. PMID:25861660

RELIABILITY, AVAILABILITY, AND SERVICEABILITY FOR PETASCALE HIGH-END COMPUTING AND BEYOND

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chokchai "Box" Leangsuksun

2011-05-31

Our project is a multi-institutional research effort that adopts interplay of RELIABILITY, AVAILABILITY, and SERVICEABILITY (RAS) aspects for solving resilience issues in highend scientific computing in the next generation of supercomputers. results lie in the following tracks: Failure prediction in a large scale HPC; Investigate reliability issues and mitigation techniques including in GPGPU-based HPC system; HPC resilience runtime & tools.

Developing and testing an instrument for identifying performance incentives in the Greek health care sector.

PubMed

Paleologou, Victoria; Kontodimopoulos, Nick; Stamouli, Aggeliki; Aletras, Vassilis; Niakas, Dimitris

2006-09-13

In the era of cost containment, managers are constantly pursuing increased organizational performance and productivity by aiming at the obvious target, i.e. the workforce. The health care sector, in which production processes are more complicated compared to other industries, is not an exception. In light of recent legislation in Greece in which efficiency improvement and achievement of specific performance targets are identified as undisputable health system goals, the purpose of this study was to develop a reliable and valid instrument for investigating the attitudes of Greek physicians, nurses and administrative personnel towards job-related aspects, and the extent to which these motivate them to improve performance and increase productivity. A methodological exploratory design was employed in three phases: a) content development and assessment, which resulted in a 28-item instrument, b) pilot testing (N = 74) and c) field testing (N = 353). Internal consistency reliability was tested via Cronbach's alpha coefficient and factor analysis was used to identify the underlying constructs. Tests of scaling assumptions, according to the Multitrait-Multimethod Matrix, were used to confirm the hypothesized component structure. Four components, referring to intrinsic individual needs and external job-related aspects, were revealed and explain 59.61% of the variability. They were subsequently labeled: job attributes, remuneration, co-workers and achievement. Nine items not meeting item-scale criteria were removed, resulting in a 19-item instrument. Scale reliability ranged from 0.782 to 0.901 and internal item consistency and discriminant validity criteria were satisfied. Overall, the instrument appears to be a promising tool for hospital administrations in their attempt to identify job-related factors, which motivate their employees. The psychometric properties were good and warrant administration to a larger sample of employees in the Greek healthcare system.

Developing and testing an instrument for identifying performance incentives in the Greek health care sector

PubMed Central

Paleologou, Victoria; Kontodimopoulos, Nick; Stamouli, Aggeliki; Aletras, Vassilis; Niakas, Dimitris

2006-01-01

Background In the era of cost containment, managers are constantly pursuing increased organizational performance and productivity by aiming at the obvious target, i.e. the workforce. The health care sector, in which production processes are more complicated compared to other industries, is not an exception. In light of recent legislation in Greece in which efficiency improvement and achievement of specific performance targets are identified as undisputable health system goals, the purpose of this study was to develop a reliable and valid instrument for investigating the attitudes of Greek physicians, nurses and administrative personnel towards job-related aspects, and the extent to which these motivate them to improve performance and increase productivity. Methods A methodological exploratory design was employed in three phases: a) content development and assessment, which resulted in a 28-item instrument, b) pilot testing (N = 74) and c) field testing (N = 353). Internal consistency reliability was tested via Cronbach's alpha coefficient and factor analysis was used to identify the underlying constructs. Tests of scaling assumptions, according to the Multitrait-Multimethod Matrix, were used to confirm the hypothesized component structure. Results Four components, referring to intrinsic individual needs and external job-related aspects, were revealed and explain 59.61% of the variability. They were subsequently labeled: job attributes, remuneration, co-workers and achievement. Nine items not meeting item-scale criteria were removed, resulting in a 19-item instrument. Scale reliability ranged from 0.782 to 0.901 and internal item consistency and discriminant validity criteria were satisfied. Conclusion Overall, the instrument appears to be a promising tool for hospital administrations in their attempt to identify job-related factors, which motivate their employees. The psychometric properties were good and warrant administration to a larger sample of employees in the Greek healthcare system. PMID:16970823

The reliability of molecular dynamics simulations of the multidrug transporter P-glycoprotein in a membrane environment

PubMed Central

Condic-Jurkic, Karmen; Subramanian, Nandhitha; Mark, Alan E.

2018-01-01

Despite decades of research, the mechanism of action of the ABC multidrug transporter P-glycoprotein (P-gp) remains elusive. Due to experimental limitations, many researchers have turned to molecular dynamics simulation studies in order to investigate different aspects of P-gp function. However, such studies are challenging and caution is required when interpreting the results. P-gp is highly flexible and the time scale on which it can be simulated is limited. There is also uncertainty regarding the accuracy of the various crystal structures available, let alone the structure of the protein in a physiologically relevant environment. In this study, three alternative structural models of mouse P-gp (3G5U, 4KSB, 4M1M), all resolved to 3.8 Å, were used to initiate sets of simulations of P-gp in a membrane environment in order to determine: a) the sensitivity of the results to differences in the starting configuration; and b) the extent to which converged results could be expected on the times scales commonly simulated for this system. The simulations suggest that the arrangement of the nucleotide binding domains (NBDs) observed in the crystal structures is not stable in a membrane environment. In all simulations, the NBDs rapidly associated (within 10 ns) and changes within the transmembrane helices were observed. The secondary structure within the transmembrane domain was best preserved in the 4M1M model under the simulation conditions used. However, the extent to which replicate simulations diverged on a 100 to 200 ns timescale meant that it was not possible to draw definitive conclusions as to which structure overall was most stable, or to obtain converged and reliable results for any of the properties examined. The work brings into question the reliability of conclusions made in regard to the nature of specific interactions inferred from previous simulation studies on this system involving similar sampling times. It also highlights the need to demonstrate the statistical significance of any results obtained in simulations of large flexible proteins, especially where the initial structure is uncertain. PMID:29370310

The reliability of molecular dynamics simulations of the multidrug transporter P-glycoprotein in a membrane environment.

PubMed

Condic-Jurkic, Karmen; Subramanian, Nandhitha; Mark, Alan E; O'Mara, Megan L

2018-01-01

Despite decades of research, the mechanism of action of the ABC multidrug transporter P-glycoprotein (P-gp) remains elusive. Due to experimental limitations, many researchers have turned to molecular dynamics simulation studies in order to investigate different aspects of P-gp function. However, such studies are challenging and caution is required when interpreting the results. P-gp is highly flexible and the time scale on which it can be simulated is limited. There is also uncertainty regarding the accuracy of the various crystal structures available, let alone the structure of the protein in a physiologically relevant environment. In this study, three alternative structural models of mouse P-gp (3G5U, 4KSB, 4M1M), all resolved to 3.8 Å, were used to initiate sets of simulations of P-gp in a membrane environment in order to determine: a) the sensitivity of the results to differences in the starting configuration; and b) the extent to which converged results could be expected on the times scales commonly simulated for this system. The simulations suggest that the arrangement of the nucleotide binding domains (NBDs) observed in the crystal structures is not stable in a membrane environment. In all simulations, the NBDs rapidly associated (within 10 ns) and changes within the transmembrane helices were observed. The secondary structure within the transmembrane domain was best preserved in the 4M1M model under the simulation conditions used. However, the extent to which replicate simulations diverged on a 100 to 200 ns timescale meant that it was not possible to draw definitive conclusions as to which structure overall was most stable, or to obtain converged and reliable results for any of the properties examined. The work brings into question the reliability of conclusions made in regard to the nature of specific interactions inferred from previous simulation studies on this system involving similar sampling times. It also highlights the need to demonstrate the statistical significance of any results obtained in simulations of large flexible proteins, especially where the initial structure is uncertain.

Structural reliability assessment capability in NESSUS

NASA Technical Reports Server (NTRS)

Millwater, H.; Wu, Y.-T.

1992-01-01

The principal capabilities of NESSUS (Numerical Evaluation of Stochastic Structures Under Stress), an advanced computer code developed for probabilistic structural response analysis, are reviewed, and its structural reliability assessed. The code combines flexible structural modeling tools with advanced probabilistic algorithms in order to compute probabilistic structural response and resistance, component reliability and risk, and system reliability and risk. An illustrative numerical example is presented.

Structural reliability assessment capability in NESSUS

NASA Astrophysics Data System (ADS)

Millwater, H.; Wu, Y.-T.

1992-07-01

The principal capabilities of NESSUS (Numerical Evaluation of Stochastic Structures Under Stress), an advanced computer code developed for probabilistic structural response analysis, are reviewed, and its structural reliability assessed. The code combines flexible structural modeling tools with advanced probabilistic algorithms in order to compute probabilistic structural response and resistance, component reliability and risk, and system reliability and risk. An illustrative numerical example is presented.

Structural vulnerability assessment using reliability of slabs in avalanche area

NASA Astrophysics Data System (ADS)

Favier, Philomène; Bertrand, David; Eckert, Nicolas; Naaim, Mohamed

2013-04-01

Improvement of risk assessment or hazard zoning requires a better understanding of the physical vulnerability of structures. To consider natural hazard issue such as snow avalanches, once the flow is characterized, highlight on the mechanical behaviour of the structure is a decisive step. A challenging approach is to quantify the physical vulnerability of impacted structures according to various avalanche loadings. The main objective of this presentation is to introduce methodology and outcomes regarding the assessment of vulnerability of reinforced concrete buildings using reliability methods. Reinforced concrete has been chosen as it is one of the usual material used to build structures exposed to potential avalanche loadings. In avalanche blue zones, structures have to resist to a pressure up to 30kPa. Thus, by providing systematic fragility relations linked to the global failure of the structure, this method may serve the avalanche risk assessment. To do so, a slab was numerically designed. It represented the avalanche facing wall of a house. Different configuration cases of the element in stake have been treated to quantify numerical aspects of the problem, such as the boundary conditions or the mechanical behaviour of the structure. The structure is analysed according to four different limit states, semi-local and global failures are considered to describe the slab behaviour. The first state is attained when cracks appear in the tensile zone, then the two next states are described consistent with the Eurocode, the final state is the total collapse of the structure characterized by the yield line theory. Failure probability is estimated in accordance to the reliability framework. Monte Carlo simulations were conducted to quantify the fragility to different loadings. Sensitivity of models in terms of input distributions were defined with statistical tools such as confidence intervals and Sobol's indexes. Conclusion and discussion of this work are established to well determine contributions, limits and future needs or developments of the research. First of all, this study provides spectrum of fragility curves of reinforced concrete structures which could be used to improve risk assessment. Second, the influence of the failure criterion picked up in this survey are discussed. Then, the weight of the statistical distribution choice is analysed. Finally, the limit between vulnerability and fragility relations is set up to establish the boundary use of our approach.

Reliability tests and guidelines for B-mode ultrasound assessment of central adiposity.

PubMed

Stoner, Lee; Chinn, Victoria; Cornwall, Jon; Meikle, Grant; Page, Rachel; Lambrick, Danielle; Faulkner, James

2015-11-01

Ultrasound represents a validated and relatively inexpensive diagnostic device for assessing central adiposity; however, widespread adoption has been impeded by the lack of reliable standard operating procedures. To examine the reliability of, and describe guidelines for, ultrasound-derived recording of intra-abdominal fat thickness (IAT) and maximal preperitoneal fat thickness (PFT). Ultrasound scans were obtained from 20 adults (50% female, 26 ± 7 years, 24·5 kg/m(2) ) on three different mornings. IAT was assessed 2 cm above the umbilicus (transverse plane) measuring from linea alba to: (i) anterior aorta, (ii) posterior aorta and (iii) anterior aspect of the vertebral column. PFT was measured from linea alba to visceral peritoneum in (i) sagittal and (ii) transverse planes, immediately over and inferior to the xiphi-sternum, respectively. For IAT, the criterion intraclass correlation coefficient (ICC) of 0·75 was exceeded for measurements to anterior aorta (0·95), posterior aorta (0·94) and vertebra (0·96). The reliability coefficient expressed as a percentage of the mean (RC%) was lowest (better) for measurement to vertebrae (9·8%). For PFT, mean thickness was comparable for sagittal (1·74 cm) and transverse (1·76 cm) planes; ICC values were also comparable for both planes (0·98 vs. 0·98, respectively), as were RC% (7·5% vs. 7·1%, respectively). IAT assessments to the vertebra were marginally more reliable than those to other structures. While PFT assessments were equally reliable for both measurements planes, precise probe placement was easier for the sagittal plane. Based on these findings, guidelines for the reliable measurement of central adiposity using ultrasound are presented. © 2015 Stichting European Society for Clinical Investigation Journal Foundation.

Input-output oriented computation algorithms for the control of large flexible structures

NASA Technical Reports Server (NTRS)

Minto, K. D.

1989-01-01

An overview is given of work in progress aimed at developing computational algorithms addressing two important aspects in the control of large flexible space structures; namely, the selection and placement of sensors and actuators, and the resulting multivariable control law design problem. The issue of sensor/actuator set selection is particularly crucial to obtaining a satisfactory control design, as clearly a poor choice will inherently limit the degree to which good control can be achieved. With regard to control law design, the researchers are driven by concerns stemming from the practical issues associated with eventual implementation of multivariable control laws, such as reliability, limit protection, multimode operation, sampling rate selection, processor throughput, etc. Naturally, the burden imposed by dealing with these aspects of the problem can be reduced by ensuring that the complexity of the compensator is minimized. Our approach to these problems is based on extensions to input/output oriented techniques that have proven useful in the design of multivariable control systems for aircraft engines. In particular, researchers are exploring the use of relative gain analysis and the condition number as a means of quantifying the process of sensor/actuator selection and placement for shape control of a large space platform.

DESIGNING ENVIRONMENTALLY FRIENDLY CHEMICAL PROCESSES

EPA Science Inventory

The design of a chemical process involves many aspects: from profitability, flexibility and reliability to safety to the environment. While each of these is important, in this work, the focus will be on profitability and the environment. Key to the study of these aspects is the ...

1st NASA Electronic Parts Packaging (NEPP) Program Electronic Technology Workshop (ETW)

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2010-01-01

NEPP supports all of NASA for >20 years - 7 NASA Centers and JPL actively participate The NEPP Program focuses on the reliability aspects of electronic devices - Three prime technical areas: Parts (die), Packaging, and Radiation Alternately, reliability may be viewed as: -

Microprocessor Seminar, phase 2

NASA Technical Reports Server (NTRS)

Scott, W. R.

1977-01-01

Workshop sessions and papers were devoted to various aspects of microprocessor and large scale integrated circuit technology. Presentations were made on advanced LSI developments for high reliability military and NASA applications. Microprocessor testing techniques were discussed, and test data were presented. High reliability procurement specifications were also discussed.

Measuring grandparenthood stress and reward: Developing a scale based on perceptions by grandparents with adolescent grandchildren in Hong Kong.

PubMed

Wei-Qun, Lou Vivian; Chi, Iris

2008-12-01

To develop a Grandparent Stress and Reward Scale (GSRS) for grandparents with adolescent grandchildren in a Chinese context. Twenty-three grandparents with adolescent grandchildren were given in-depth interviews on perceived grandparenthood stress and reward to develop the GSRS. The GSRS was then tested on 107 older adults (mean age, 75.8 years) whose youngest grandchildren were aged 12 or older, living in the community, and were recruited from elderly service agencies. Face-to-face interviews were conducted with a standardized questionnaire which included the GSRS, Life Satisfaction Scale for Chinese Elders (LSS-C), a single-item measure on grandparenthood stress, and demographic measures. The GSRS has satisfactory structure validity. It measures three aspects of reward (self-esteem and life satisfaction, life-long learning opportunity, and grandchildren support), and two aspects of stress (relationship-oriented stress and grandchildren-oriented stress). GSRS was correlated with LSS-C and perceived grandparenthood stress as theoretically expected, which supported its criteria-related validity. It also had satisfactory reliability based on the internal consistency coefficient. The GSRS was a valid and reliable measure that assesses meaning given to grandparents' perception on reward and stress in relations with adolescent grandchildren in a Chinese context. The underlying construct of the scale suggested that the meaning given to grandparenthood in the Chinese context was still influenced by the Confucian tradition.

NASA Electronic Parts and Packaging (NEPP) Program

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2008-01-01

This viewgraph presentation reviews NASA's Electronic Parts and Packaging (NEPP) Program. The NEPP mission is to provide guidance to NASA for the selection and and application of microelectronics technologies, to improve understanding of the risks related to the use of these technologies in the space environment and to ensure that appropriate research is performed to meet NASA mission needs. The NEPP Program focuses on the reliability aspects of electronic devices. Three principal aspects to this reliability: (1) lifetime, (2) effects of space radiation and the space environment, and (3) creation and maintenance of the assurance support infrastructure required for success.

Development and Initial Validation of a Multidimensional Scale Assessing Subjective Well-Being: The Well-Being Scale (WeBS).

PubMed

Lui, P Priscilla; Fernando, Gaithri A

2018-02-01

Numerous scales currently exist that assess well-being, but research on measures of well-being is still advancing. Conceptualization and measurement of subjective well-being have emphasized intrapsychic over psychosocial domains of optimal functioning, and disparate research on hedonic, eudaimonic, and psychological well-being lacks a unifying theoretical model. Lack of systematic investigations on the impact of culture on subjective well-being has also limited advancement of this field. The goals of this investigation were to (1) develop and validate a self-report measure, the Well-Being Scale (WeBS), that simultaneously assesses overall well-being and physical, financial, social, hedonic, and eudaimonic domains of this construct; (2) evaluate factor structures that underlie subjective well-being; and (3) examine the measure's psychometric properties. Three empirical studies were conducted to develop and validate the 29-item scale. The WeBS demonstrated an adequate five-factor structure in an exploratory structural equation model in Study 1. Confirmatory factor analyses showed that a bifactor structure best fit the WeBS data in Study 2 and Study 3. Overall WeBS scores and five domain-specific subscale scores demonstrated adequate to excellent internal consistency reliability and construct validity. Mean differences in overall well-being and its five subdomains are presented for different ethnic groups. The WeBS is a reliable and valid measure of multiple aspects of well-being that are considered important to different ethnocultural groups.

Enabling aspects of fiber optic acoustic sensing in harsh environments

NASA Astrophysics Data System (ADS)

Saxena, Indu F.

2013-05-01

The advantages of optical fiber sensing in harsh electromagnetic as well as physical stress environments make them uniquely suited for structural health monitoring and non-destructive testing. In addition to aerospace applications they are making a strong footprint in geophysical monitoring and exploration applications for higher temperature and pressure environments, due to the high temperature resilience of fused silica glass sensors. Deeper oil searches and geothermal exploration and harvesting are possible with these novel capabilities. Progress in components and technologies that are enabling these systems to be fieldworthy are reviewed and emerging techniques summarized that could leapfrog the system performance and reliability.

Self-efficacy: a means of identifying problems in nursing education and career progress.

PubMed

Harvey, V; McMurray, N

1994-10-01

Two nursing self-efficacy scales (academic and clinical) were developed and refined for use in identifying problems in progress in undergraduate nurses. Emergent factors within each scale contained items representing important aspects of nursing education. Both measures showed good internal consistency, test-retest reliability, and construct validity. Sensitivity to content and focus of tuition at time of completion was shown with some changes in factor structure over samples of first year nursing students. Academic self-efficacy (but not clinical self-efficacy) was predictive of course withdrawal. Applications to nursing education, progress in pursuing a nursing career and attrition are discussed.

Development of student performance assessment based on scientific approach for a basic physics practicum in simple harmonic motion materials

NASA Astrophysics Data System (ADS)

Serevina, V.; Muliyati, D.

2018-05-01

This research aims to develop students’ performance assessment instrument based on scientific approach is valid and reliable in assessing the performance of students on basic physics lab of Simple Harmonic Motion (SHM). This study uses the ADDIE consisting of stages: Analyze, Design, Development, Implementation, and Evaluation. The student performance assessment developed can be used to measure students’ skills in observing, asking, conducting experiments, associating and communicate experimental results that are the ‘5M’ stages in a scientific approach. Each grain of assessment in the instrument is validated by the instrument expert and the evaluation with the result of all points of assessment shall be eligible to be used with a 100% eligibility percentage. The instrument is then tested for the quality of construction, material, and language by panel (lecturer) with the result: 85% or very good instrument construction aspect, material aspect 87.5% or very good, and language aspect 83% or very good. For small group trial obtained instrument reliability level of 0.878 or is in the high category, where r-table is 0.707. For large group trial obtained instrument reliability level of 0.889 or is in the high category, where r-table is 0.320. Instruments declared valid and reliable for 5% significance level. Based on the result of this research, it can be concluded that the student performance appraisal instrument based on the developed scientific approach is declared valid and reliable to be used in assessing student skill in SHM experimental activity.

Reliability in fiber optic cable harness manufacturing

NASA Astrophysics Data System (ADS)

McCoy, Bruce M.

Key aspects of manufacturing cable harnesses for aircraft and spacecraft that incorporate optical fiber/cables along with traditional wiring are discussed. Issues regarding feasibility of automation of assembly processes, manual assembly, testing, installation, quality assurance, reliability and maintainability are addressed. Training procedures, formal training programs, and their results are reviewed.

Potential for protein surface shape analysis using spherical harmonics and 3D Zernike descriptors.

PubMed

Venkatraman, Vishwesh; Sael, Lee; Kihara, Daisuke

2009-01-01

With structure databases expanding at a rapid rate, the task at hand is to provide reliable clues to their molecular function and to be able to do so on a large scale. This, however, requires suitable encodings of the molecular structure which are amenable to fast screening. To this end, moment-based representations provide a compact and nonredundant description of molecular shape and other associated properties. In this article, we present an overview of some commonly used representations with specific focus on two schemes namely spherical harmonics and their extension, the 3D Zernike descriptors. Key features and differences of the two are reviewed and selected applications are highlighted. We further discuss recent advances covering aspects of shape and property-based comparison at both global and local levels and demonstrate their applicability through some of our studies.

Neuronal correlates of the five factor model (FFM) of human personality: Multimodal imaging in a large healthy sample.

PubMed

Bjørnebekk, Astrid; Fjell, Anders M; Walhovd, Kristine B; Grydeland, Håkon; Torgersen, Svenn; Westlye, Lars T

2013-01-15

Advances in neuroimaging techniques have recently provided glimpse into the neurobiology of complex traits of human personality. Whereas some intriguing findings have connected aspects of personality to variations in brain morphology, the relations are complex and our current understanding is incomplete. Therefore, we aimed to provide a comprehensive investigation of brain-personality relations using a multimodal neuroimaging approach in a large sample comprising 265 healthy individuals. The NEO Personality Inventory was used to provide measures of core aspects of human personality, and imaging phenotypes included measures of total and regional brain volumes, regional cortical thickness and arealization, and diffusion tensor imaging indices of white matter (WM) microstructure. Neuroticism was the trait most clearly linked to brain structure. Higher neuroticism including facets reflecting anxiety, depression and vulnerability to stress was associated with smaller total brain volume, widespread decrease in WM microstructure, and smaller frontotemporal surface area. Higher scores on extraversion were associated with thinner inferior frontal gyrus, and conscientiousness was negatively associated with arealization of the temporoparietal junction. No reliable associations between brain structure and agreeableness and openness, respectively, were found. The results provide novel evidence of the associations between brain structure and variations in human personality, and corroborate previous findings of a consistent neuroanatomical basis of negative emotionality. Copyright © 2012 Elsevier Inc. All rights reserved.

An enhanced cluster analysis program with bootstrap significance testing for ecological community analysis

USGS Publications Warehouse

McKenna, J.E.

2003-01-01

The biosphere is filled with complex living patterns and important questions about biodiversity and community and ecosystem ecology are concerned with structure and function of multispecies systems that are responsible for those patterns. Cluster analysis identifies discrete groups within multivariate data and is an effective method of coping with these complexities, but often suffers from subjective identification of groups. The bootstrap testing method greatly improves objective significance determination for cluster analysis. The BOOTCLUS program makes cluster analysis that reliably identifies real patterns within a data set more accessible and easier to use than previously available programs. A variety of analysis options and rapid re-analysis provide a means to quickly evaluate several aspects of a data set. Interpretation is influenced by sampling design and a priori designation of samples into replicate groups, and ultimately relies on the researcher's knowledge of the organisms and their environment. However, the BOOTCLUS program provides reliable, objectively determined groupings of multivariate data.

The Correction of Myopia Evaluation Trial: lessons from the study design.

PubMed

Hyman, L; Gwiazda, J

2004-01-01

The Correction of Myopia Evaluation Trial (COMET), a multicentre clinical trial based in 4 schools of optometry in the United States, evaluated the effect of progressive addition lenses versus single vision lenses on myopia progression in an ethnically diverse group of 469 myopic children aged 6 to 11 years. Completion of the clinical trial phase of the study provides an opportunity to evaluate aspects of the study design that contribute to its success. This article describes aspects of the study design that were influential in ensuring the smooth conduct of COMET. These include a dedicated team of investigators, an organisational structure with strong leadership and an independent Co-ordinating Centre, regular communication among investigators, flexible and creative approaches to recruitment and retention, sensitivity to concerns for child safety and child participation, and methods for enhancing and monitoring data reliability. The experience with COMET has provided a number of valuable lessons for all aspects of the study design that should benefit the development and implementation of future clinical trials, particularly those done in similar populations of children. The use of a carefully designed protocol using standard methods by dedicated members of the study team is essential in ensuring achievement of the study aims.

3-DIMENSIONAL Geometric Survey and Structural Modelling of the Dome of Pisa Cathedral

NASA Astrophysics Data System (ADS)

Aita, D.; Barsotti, R.; Bennati, S.; Caroti, G.; Piemonte, A.

2017-02-01

This paper aims to illustrate the preliminary results of a research project on the dome of Pisa Cathedral (Italy). The final objective of the present research is to achieve a deep understanding of the structural behaviour of the dome, through a detailed knowledge of its geometry and constituent materials, and by taking into account historical and architectural aspects as well. A reliable survey of the dome is the essential starting point for any further investigation and adequate structural modelling. Examination of the status quo on the surveys of the Cathedral dome shows that a detailed survey suitable for structural analysis is in fact lacking. For this reason, high-density and high-precision surveys have been planned, by considering that a different survey output is needed, according both to the type of structural model chosen and purposes to be achieved. Thus, both range-based (laser scanning) and image-based (3D Photogrammetry) survey methodologies have been used. This contribution introduces the first results concerning the shape of the dome derived from surveys. Furthermore, a comparison is made between such survey outputs and those available in the literature.

Reliability and risk assessment of structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1991-01-01

Development of reliability and risk assessment of structural components and structures is a major activity at Lewis Research Center. It consists of five program elements: (1) probabilistic loads; (2) probabilistic finite element analysis; (3) probabilistic material behavior; (4) assessment of reliability and risk; and (5) probabilistic structural performance evaluation. Recent progress includes: (1) the evaluation of the various uncertainties in terms of cumulative distribution functions for various structural response variables based on known or assumed uncertainties in primitive structural variables; (2) evaluation of the failure probability; (3) reliability and risk-cost assessment; and (4) an outline of an emerging approach for eventual certification of man-rated structures by computational methods. Collectively, the results demonstrate that the structural durability/reliability of man-rated structural components and structures can be effectively evaluated by using formal probabilistic methods.

Reliability issues of free-space communications systems and networks

NASA Astrophysics Data System (ADS)

Willebrand, Heinz A.

2003-04-01

Free space optics (FSO) is a high-speed point-to-point connectivity solution traditionally used in the enterprise campus networking market for building-to-building LAN connectivity. However, more recently some wire line and wireless carriers started to deploy FSO systems in their networks. The requirements on FSO system reliability, meaing both system availability and component reliability, are far more stringent in the carrier market when compared to the requirements in the enterprise market segment. This paper tries to outline some of the aspects that are important to ensure carrier class system reliability.

Criterion-Referenced Testing in Foreign Language Teaching.

ERIC Educational Resources Information Center

Takala, Sauli

A review of literature serves as the basis for a discussion of various aspects of criterion-referenced tests. The aspects discussed are: teaching and evaluation objectives, criterion- and norm-referenced measurement, stages in construction of criterion-referenced tests, construction and selection of items, test validity, and test reliability.…

Psychometric testing of the Chinese version of the medical outcomes study social support survey (MOS-SSS-C).

PubMed

Yu, Doris S F; Lee, Diana T F; Woo, Jean

2004-04-01

The purpose of this study was to assess the psychometric properties of the Chinese version of the Medical Outcomes Study Social Support Survey (MOS-SSS-C) in a sample of 110 patients. Criterion-related and construct validities of the MOS-SSS-C were evaluated by correlations with the Chinese version of the Multidimensional Perceived Social Support Survey (r =.82) and the Hospital Anxiety and Depression Scale (r = -.58). Confirmatory factor analysis affirmed the four-factor structure of the MOS-SSS-C in measuring the functional aspects of perceived social support. Cronbach's alphas for the subscales ranged from.93 to.96, whereas the alpha for the overall scale was.98. The 2-week test-retest reliability of the MOS-SSS-C as measured by the intraclass correlation coefficient was.84. The MOS-SSS-C is a psychometrically sound multidimensional measure for the evaluation of functional aspects of perceived social support by Chinese patients with chronic disease. Copyright 2004 Wiley Periodicals, Inc.

Comparisons between stellar models and reliability of the theoretical models

NASA Astrophysics Data System (ADS)

Lebreton, Yveline; Montalbán, Josefina

2010-07-01

The high quality of the asteroseismic data provided by space missions such as CoRoT (Michel et al. in The CoRoT Mission, ESA Spec. Publ. vol. 1306, p. 39, 2006) or expected from new operating missions such as Kepler (Christensen-Dalsgaard et al. in Commun. Asteroseismol. 150:350, 2007) requires the capacity of stellar evolution codes to provide accurate models whose numerical precision is better than the expected observational errors (i.e. below 0.1 μHz on the frequencies in the case of CoRoT). We present a review of some thorough comparisons of stellar models produced by different evolution codes, involved in the CoRoT/ESTA activities (Monteiro in Evolution and Seismic Tools for Stellar Astrophysics, 2009). We examine the numerical aspects of the computations as well as the effects of different implementations of the same physics on the global quantities, physical structure and oscillations properties of the stellar models. We also discuss a few aspects of the input physics.

Implementing the undergraduate mini-CEX: a tailored approach at Southampton University.

PubMed

Hill, Faith; Kendall, Kathleen; Galbraith, Kevin; Crossley, Jim

2009-04-01

The mini-clinical evaluation exercise (mini-CEX) is widely used in the UK to assess clinical competence, but there is little evidence regarding its implementation in the undergraduate setting. This study aimed to estimate the validity and reliability of the undergraduate mini-CEX and discuss the challenges involved in its implementation. A total of 3499 mini-CEX forms were completed. Validity was assessed by estimating associations between mini-CEX score and a number of external variables, examining the internal structure of the instrument, checking competency domain response rates and profiles against expectations, and by qualitative evaluation of stakeholder interviews. Reliability was evaluated by overall reliability coefficient (R), estimation of the standard error of measurement (SEM), and from stakeholders' perceptions. Variance component analysis examined the contribution of relevant factors to students' scores. Validity was threatened by various confounding variables, including: examiner status; case complexity; attachment specialty; patient gender, and case focus. Factor analysis suggested that competency domains reflect a single latent variable. Maximum reliability can be achieved by aggregating scores over 15 encounters (R = 0.73; 95% confidence interval [CI] +/- 0.28 based on a 6-point assessment scale). Examiner stringency contributed 29% of score variation and student attachment aptitude 13%. Stakeholder interviews revealed staff development needs but the majority perceived the mini-CEX as more reliable and valid than the previous long case. The mini-CEX has good overall utility for assessing aspects of the clinical encounter in an undergraduate setting. Strengths include fidelity, wide sampling, perceived validity, and formative observation and feedback. Reliability is limited by variable examiner stringency, and validity by confounding variables, but these should be viewed within the context of overall assessment strategies.

Validity and Reliability of Published Comprehensive Theory of Mind Tests for Normal Preschool Children: A Systematic Review.

PubMed

Ziatabar Ahmadi, Seyyede Zohreh; Jalaie, Shohreh; Ashayeri, Hassan

2015-09-01

Theory of mind (ToM) or mindreading is an aspect of social cognition that evaluates mental states and beliefs of oneself and others. Validity and reliability are very important criteria when evaluating standard tests; and without them, these tests are not usable. The aim of this study was to systematically review the validity and reliability of published English comprehensive ToM tests developed for normal preschool children. We searched MEDLINE (PubMed interface), Web of Science, Science direct, PsycINFO, and also evidence base Medicine (The Cochrane Library) databases from 1990 to June 2015. Search strategy was Latin transcription of 'Theory of Mind' AND test AND children. Also, we manually studied the reference lists of all final searched articles and carried out a search of their references. Inclusion criteria were as follows: Valid and reliable diagnostic ToM tests published from 1990 to June 2015 for normal preschool children; and exclusion criteria were as follows: the studies that only used ToM tests and single tasks (false belief tasks) for ToM assessment and/or had no description about structure, validity or reliability of their tests. METHODological quality of the selected articles was assessed using the Critical Appraisal Skills Programme (CASP). In primary searching, we found 1237 articles in total databases. After removing duplicates and applying all inclusion and exclusion criteria, we selected 11 tests for this systematic review. There were a few valid, reliable and comprehensive ToM tests for normal preschool children. However, we had limitations concerning the included articles. The defined ToM tests were different in populations, tasks, mode of presentations, scoring, mode of responses, times and other variables. Also, they had various validities and reliabilities. Therefore, it is recommended that the researchers and clinicians select the ToM tests according to their psychometric characteristics, validity and reliability.

Validity and Reliability of Published Comprehensive Theory of Mind Tests for Normal Preschool Children: A Systematic Review

PubMed Central

Ziatabar Ahmadi, Seyyede Zohreh; Jalaie, Shohreh; Ashayeri, Hassan

2015-01-01

Objective: Theory of mind (ToM) or mindreading is an aspect of social cognition that evaluates mental states and beliefs of oneself and others. Validity and reliability are very important criteria when evaluating standard tests; and without them, these tests are not usable. The aim of this study was to systematically review the validity and reliability of published English comprehensive ToM tests developed for normal preschool children. Method: We searched MEDLINE (PubMed interface), Web of Science, Science direct, PsycINFO, and also evidence base Medicine (The Cochrane Library) databases from 1990 to June 2015. Search strategy was Latin transcription of ‘Theory of Mind’ AND test AND children. Also, we manually studied the reference lists of all final searched articles and carried out a search of their references. Inclusion criteria were as follows: Valid and reliable diagnostic ToM tests published from 1990 to June 2015 for normal preschool children; and exclusion criteria were as follows: the studies that only used ToM tests and single tasks (false belief tasks) for ToM assessment and/or had no description about structure, validity or reliability of their tests. Methodological quality of the selected articles was assessed using the Critical Appraisal Skills Programme (CASP). Result: In primary searching, we found 1237 articles in total databases. After removing duplicates and applying all inclusion and exclusion criteria, we selected 11 tests for this systematic review. Conclusion: There were a few valid, reliable and comprehensive ToM tests for normal preschool children. However, we had limitations concerning the included articles. The defined ToM tests were different in populations, tasks, mode of presentations, scoring, mode of responses, times and other variables. Also, they had various validities and reliabilities. Therefore, it is recommended that the researchers and clinicians select the ToM tests according to their psychometric characteristics, validity and reliability. PMID:27006666

A Mixed-methods Study to Assess Interrater Reliability and Nurse Perception of the Braden Scale in a Tertiary Acute Care Setting.

PubMed

Ho, Chester H; Cheung, Amanda; Southern, Danielle; Ocampo, Wrechelle; Kaufman, Jaime; Hogan, David B; Baylis, Barry; Conly, John M; Stelfox, Henry T; Ghali, William A

2016-12-01

Research regarding the reliability of the Braden Scale and nurses' perspectives on the instrument for predicting pressure ulcer (PU) risk in acute care settings is limited. A mixed-methods study was conducted in a tertiary acute care facility to examine interrater reliability (IRR) of the Braden Scale and its subscales, and a qualitative survey using semi-structured interviews was conducted among nurses caring for patients in acute care units to gain nurse perspective regarding scale usability. Data were extracted from a previous retrospective, randomized, controlled trial involving adult patients with compromised mobility receiving care in a tertiary acute care hospital in Canada. One-way, intraclass correlation coefficients (ICCs) were calculated on item and total scores, and kappa statistics were used to determine reliability of categorizing patients on their risk. Interview results were categorized by common themes. Reliability was assessed on 64 patients, where nurses and research staff independently assessed enrolled participants at baseline and after 72 hours using the Braden Scale as it appeared on an electronic medical record. IRR for the total score was high (ICC = 0.807). The friction and shear item had the lowest reliability (ICC = 0.266). Reliability of categorizing patients' level of risk had moderate agreement (κ = 0.408). Three (3) major and 12 subthemes emerged from the 14 nurse interviews; nurses were aware of the scale's purpose but were uncertain of its effectiveness, some items were difficult to rate, and questions were raised as to whether using the scale enhanced patient care. Aspects identified by nurses to enhance usability included: 1) changes to the electronic version (incorporating the scale into daily assessment documents with readily available item descriptions), 2) additional training, and 3) easily available resource material to improve reliability and usability of scale. These findings need to be considered when using the Braden Scale in clinical practice. Further study of the value of the total Braden Scale and its subscales is warranted.

Educating next-generation civil engineers about smart structures technology

NASA Astrophysics Data System (ADS)

Zhang, Yunfeng

2005-05-01

The implementation of smart structures technology in the design, construction and maintenance of civil and mechanical systems have been shown beneficial to the performance enhancement, operating efficiency and reliability of structural systems. However, most of today's engineering students are unaware of the remarkable properties of smart sensors and many applications of smart structures technology. It is thus desirable to prepare the future engineers of the society for the cutting-edge technologies in smart structures, for which they may see broad application in their generation. Pioneering work in incorporating smart structures technologies into civil engineering curriculum has been done by the writer at Lehigh University and is described in this paper. In particular, a graduate-level course entitled "Smart Structural Systems" has been taught in the Spring Semester of Year 2004 at Lehigh University. To better convey the course material to students, a smart structures test-bed, which is used not only to showcase various technological aspects of a smart structural system but also offer students an opportunity to gain hands-on experience by doing experiments has been under development at Lehigh University. The hands-on experience that could be developed with the smart structures test-bed is believed being essential for students to have a good understanding and mastering of the smart structures technologies.

Reliability Criteria for Thick Bonding Wire.

PubMed

Dagdelen, Turker; Abdel-Rahman, Eihab; Yavuz, Mustafa

2018-04-17

Bonding wire is one of the main interconnection techniques. Thick bonding wire is widely used in power modules and other high power applications. This study examined the case for extending the use of traditional thin wire reliability criteria, namely wire flexure and aspect ratio, to thick wires. Eleven aluminum (Al) and aluminum coated copper (CucorAl) wire samples with diameter 300 μm were tested experimentally. The wire response was measured using a novel non-contact method. High fidelity FEM models of the wire were developed and validated. We found that wire flexure is not correlated to its stress state or fatigue life. On the other hand, aspect ratio is a consistent criterion of thick wire fatigue life. Increasing the wire aspect ratio lowers its critical stress and increases its fatigue life. Moreover, we found that CucorAl wire has superior performance and longer fatigue life than Al wire.

Reliability Criteria for Thick Bonding Wire

PubMed Central

Yavuz, Mustafa

2018-01-01

Bonding wire is one of the main interconnection techniques. Thick bonding wire is widely used in power modules and other high power applications. This study examined the case for extending the use of traditional thin wire reliability criteria, namely wire flexure and aspect ratio, to thick wires. Eleven aluminum (Al) and aluminum coated copper (CucorAl) wire samples with diameter 300 μm were tested experimentally. The wire response was measured using a novel non-contact method. High fidelity FEM models of the wire were developed and validated. We found that wire flexure is not correlated to its stress state or fatigue life. On the other hand, aspect ratio is a consistent criterion of thick wire fatigue life. Increasing the wire aspect ratio lowers its critical stress and increases its fatigue life. Moreover, we found that CucorAl wire has superior performance and longer fatigue life than Al wire. PMID:29673194

Development and validation of surgical training tool: cystectomy assessment and surgical evaluation (CASE) for robot-assisted radical cystectomy for men.

PubMed

Hussein, Ahmed A; Sexton, Kevin J; May, Paul R; Meng, Maxwell V; Hosseini, Abolfazl; Eun, Daniel D; Daneshmand, Siamak; Bochner, Bernard H; Peabody, James O; Abaza, Ronney; Skinner, Eila C; Hautmann, Richard E; Guru, Khurshid A

2018-04-13

We aimed to develop a structured scoring tool: cystectomy assessment and surgical evaluation (CASE) that objectively measures and quantifies performance during robot-assisted radical cystectomy (RARC) for men. A multinational 10-surgeon expert panel collaborated towards development and validation of CASE. The critical steps of RARC in men were deconstructed into nine key domains, each assessed by five anchors. Content validation was done utilizing the Delphi methodology. Each anchor was assessed in terms of context, score concordance, and clarity. The content validity index (CVI) was calculated for each aspect. A CVI ≥ 0.75 represented consensus, and this statement was removed from the next round. This process was repeated until consensus was achieved for all statements. CASE was used to assess de-identified videos of RARC to determine reliability and construct validity. Linearly weighted percent agreement was used to assess inter-rater reliability (IRR). A logit model for odds ratio (OR) was used to assess construct validation. The expert panel reached consensus on CASE after four rounds. The final eight domains of the CASE included: pelvic lymph node dissection, development of the peri-ureteral space, lateral pelvic space, anterior rectal space, control of the vascular pedicle, anterior vesical space, control of the dorsal venous complex, and apical dissection. IRR > 0.6 was achieved for all eight domains. Experts outperformed trainees across all domains. We developed and validated a reliable structured, procedure-specific tool for objective evaluation of surgical performance during RARC. CASE may help differentiate novice from expert performances.

The Polish version of Skindex-29: psychometric properties of an instrument to measure quality of life in dermatology.

PubMed

Janowski, Konrad; Steuden, Stanisława; Bereza, Bernarda

2014-02-01

Skin conditions have a negative impact on quality of life and it is necessary to quantify this impact. Skindex-29 is a self-report questionnaire developed to measure dermatology-specific quality of life. The objective of this study is to adapt this questionnaire to Polish conditions. The adaptation procedure involved the works on the linguistic content of the items and testing psychometric properties of the Polish version of Skindex-29, including item characteristics, factorial structure, aspects of reliability and validity. Two-hundred and ninety patients (63.4% women and 35.2% men) suffering from a range of skin conditions were recruited from several dermatological out-patient and in-patient clinics in Poland. Quality of life was measured using Skindex-29 and appropriate clinical data were collected. The global score of Skindex-29 showed the normal distribution. Cronbach's α reliability coefficients were found to be high to very high for all Skindex-29 indexes. Factor analysis yielded four factors, in contrast to the original version of the questionnaire, for which a three-factor solution had been reported. Skindex-29 validity was demonstrated by showing the differences in the quality of life scores across different diagnostic categories, and between in-patients and out-patients. Skindex-29 global scores were found to be significantly predicted by the localization of the skin lesions on legs, anogenital areas and palms. The findings of this study support reliability and validity of the Polish version of Skindex-29, but they also raise questions to its three-factor structure.

Beyond Words: Other Aspects of Self-Disclosure.

ERIC Educational Resources Information Center

Taylor, Dalmas A.; Kleinhans, Bruce

The authors discuss several studies all of which demonstrate that duration of self-disclosure is a reliable component of the interpersonal process. They review other aspects of self-disclosure including that: (1) the act of revealing is not rewarding per se but can lead to rewards depending on the interpersonal nature of the situation; (2)…

Shock reliability analysis and improvement of MEMS electret-based vibration energy harvesters

NASA Astrophysics Data System (ADS)

Renaud, M.; Fujita, T.; Goedbloed, M.; de Nooijer, C.; van Schaijk, R.

2015-10-01

Vibration energy harvesters can serve as a replacement solution to batteries for powering tire pressure monitoring systems (TPMS). Autonomous wireless TPMS powered by microelectromechanical system (MEMS) electret-based vibration energy harvester have been demonstrated. The mechanical reliability of the MEMS harvester still has to be assessed in order to bring the harvester to the requirements of the consumer market. It should survive the mechanical shocks occurring in the tire environment. A testing procedure to quantify the shock resilience of harvesters is described in this article. Our first generation of harvesters has a shock resilience of 400 g, which is far from being sufficient for the targeted application. In order to improve this aspect, the first important aspect is to understand the failure mechanism. Failure is found to occur in the form of fracture of the device’s springs. It results from impacts between the anchors of the springs when the harvester undergoes a shock. The shock resilience of the harvesters can be improved by redirecting these impacts to nonvital parts of the device. With this philosophy in mind, we design three types of shock absorbing structures and test their effect on the shock resilience of our MEMS harvesters. The solution leading to the best results consists of rigid silicon stoppers covered by a layer of Parylene. The shock resilience of the harvesters is brought above 2500 g. Results in the same range are also obtained with flexible silicon bumpers, which are simpler to manufacture.

The quality and suitability of written educational materials for patients*.

PubMed

Demir, Fatma; Ozsaker, Esma; Ilce, Arzu Ozcan

2008-01-01

In this study, the quality and suitability of written educational materials being used for the education of patients in surgical departments of hospitals were studied. In the literature, it is stated that most of the educational materials for patients are not suitable from the aspects of contents, structure, design, composition and language. In this descriptive type study, which was carried out between March and May 2006, 59 examples of written educational material used for patient education at 138 surgical clinics were evaluated for quality and suitability. The written educational materials obtained were evaluated independently by researchers from the aspect of quality and suitability. The DISCERN measuring instrument was used in the evaluation of the reliability of the written educational materials and the Evaluation of the Suitability of Written Materials form was used in the evaluation of suitability. It was determined that the educational materials received low scores for reliability and information quality. It was determined that the total scores for the written educational materials were average for suitability. It was determined that there were no written educational materials in more than half of the surgical units included in the study. It was also found that the educational materials had serious deficiencies. This study showed that there was no adequate written patient educational material at the clinics. This deficiency in written educational materials could be eliminated by having them prepared by health professionals in accordance with guidebooks and taking the target group into account.

Automatic structural matching of 3D image data

NASA Astrophysics Data System (ADS)

Ponomarev, Svjatoslav; Lutsiv, Vadim; Malyshev, Igor

2015-10-01

A new image matching technique is described. It is implemented as an object-independent hierarchical structural juxtaposition algorithm based on an alphabet of simple object-independent contour structural elements. The structural matching applied implements an optimized method of walking through a truncated tree of all possible juxtapositions of two sets of structural elements. The algorithm was initially developed for dealing with 2D images such as the aerospace photographs, and it turned out to be sufficiently robust and reliable for matching successfully the pictures of natural landscapes taken in differing seasons from differing aspect angles by differing sensors (the visible optical, IR, and SAR pictures, as well as the depth maps and geographical vector-type maps). At present (in the reported version), the algorithm is enhanced based on additional use of information on third spatial coordinates of observed points of object surfaces. Thus, it is now capable of matching the images of 3D scenes in the tasks of automatic navigation of extremely low flying unmanned vehicles or autonomous terrestrial robots. The basic principles of 3D structural description and matching of images are described, and the examples of image matching are presented.

Validity and reliability of a structured interview for early detection and risk assessment of parenting and developmental problems in young children: a cross-sectional study

PubMed Central

2012-01-01

Background Preventive child health care is well suited for the early detection of parenting and developmental problems. However, as far as the younger age group is concerned, there are no validated early detection instruments which cover both the child and its environment. Therefore, we have developed a broad-scope structured interview which assesses parents’ concerns and their need for support, using both the parental perspective and the experience of the child health care nurse: the Structured Problem Analysis of Raising Kids (SPARK). This study reports the psychometric characteristics of the SPARK. Method A cross-sectional study of 2012 18-month-old children, living in Zeeland, a province of the Netherlands. Inter-rater reliability was assessed in 67 children. Convergent validity was assessed by comparing SPARK-domains with domains in self-report questionnaires on child development and parenting stress. Discriminative validity was assessed by comparing different outcomes of the SPARK between groups with different levels of socio-economic status and by performing an extreme-groups comparison. The user experience of both parents and nurses was assessed with the aid of an online survey. Results The response rate was 92.1% for the SPARK. Self-report questionnaires were returned in the case of 66.9% of the remaining 1721 children. There was selective non-reporting: 33.1% of the questionnaires were not returned, covering 65.2% of the children with a high-risk label according to the SPARK (p < 0.001). Inter-rater reliability was good to excellent with intraclass correlations between 0.85 and 1.0 for physical topics; between 0.61 and 0.8 for social-emotional topics and 0.92 for the overall risk assessment. Convergent validity was unexpectedly low (all correlations ≤0.3) although the pattern was as expected. Discriminative validity was good. Users were satisfied with the SPARK and identified some topics for improvement. Conclusion The SPARK discriminates between children with a high, increased and low risk of parenting and developmental problems. It does so in a reliable way, but more research is needed on aspects of validity and in other populations. PMID:22697218

Structural aspects of the solvation shell of lysine and acetylated lysine: A Car-Parrinello and classical molecular dynamics investigation

NASA Astrophysics Data System (ADS)

Carnevale, V.; Raugei, S.

2009-12-01

Lysine acetylation is a post-translational modification, which modulates the affinity of protein-protein and/or protein-DNA complexes. Its crucial role as a switch in signaling pathways highlights the relevance of charged chemical groups in determining the interactions between water and biomolecules. A great effort has been recently devoted to assess the reliability of classical molecular dynamics simulations in describing the solvation properties of charged moieties. In the spirit of these investigations, we performed classical and Car-Parrinello molecular dynamics simulations on lysine and acetylated-lysine in aqueous solution. A comparative analysis between the two computational schemes is presented with a focus on the first solvation shell of the charged groups. An accurate structural analysis unveils subtle, yet statistically significant, differences which are discussed in connection to the significant electronic density charge transfer occurring between the solute and the surrounding water molecules.

Virtually Out of This World!

NASA Technical Reports Server (NTRS)

2002-01-01

Ames Research Center granted Reality Capture Technologies (RCT), Inc., a license to further develop NASA's Mars Map software platform. The company incorporated NASA#s innovation into software that uses the Virtual Plant Model (VPM)(TM) to structure, modify, and implement the construction sites of industrial facilities, as well as develop, validate, and train operators on procedures. The VPM orchestrates the exchange of information between engineering, production, and business transaction systems. This enables users to simulate, control, and optimize work processes while increasing the reliability of critical business decisions. Engineers can complete the construction process and test various aspects of it in virtual reality before building the actual structure. With virtual access to and simulation of the construction site, project personnel can manage, access control, and respond to changes on complex constructions more effectively. Engineers can also create operating procedures, training, and documentation. Virtual Plant Model(TM) is a trademark of Reality Capture Technologies, Inc.

Practical design considerations for photovoltaic power station

NASA Astrophysics Data System (ADS)

Swanson, T. D.

Aspects of photovoltaic (PV) technology are discussed along with generic PV design considerations, taking into account the resource sunlight, PV modules and their reliability, questions of PV system design, the support structure subsystem, and a power conditioning unit subsystem. A description is presented of two recent projects which demonstrate the translation of an idea into actual working PV systems. A privately financed project in Denton, Maryland, went on line in early December, 1982, and began providing power to the local utility grid. It represents the first intermediate size, grid-connected, privately financed power station in the U.S. Based on firm quotes, the actual cost of this system is about $13/W peak. The other project, called the PV Breeder, is an energy independent facility which utilizes solar power to make new solar cells. It is also the first large industrial structure completely powered by the sun.

NASA GRC Fatigue Crack Initiation Life Prediction Models

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R.

2002-01-01

Metal fatigue has plagued structural components for centuries, and it remains a critical durability issue in today's aerospace hardware. This is true despite vastly improved and advanced materials, increased mechanistic understanding, and development of accurate structural analysis and advanced fatigue life prediction tools. Each advance is quickly taken advantage of to produce safer, more reliable, more cost effective, and better performing products. In other words, as the envelope is expanded, components are then designed to operate just as close to the newly expanded envelope as they were to the initial one. The problem is perennial. The economic importance of addressing structural durability issues early in the design process is emphasized. Tradeoffs with performance, cost, and legislated restrictions are pointed out. Several aspects of structural durability of advanced systems, advanced materials and advanced fatigue life prediction methods are presented. Specific items include the basic elements of durability analysis, conventional designs, barriers to be overcome for advanced systems, high-temperature life prediction for both creep-fatigue and thermomechanical fatigue, mean stress effects, multiaxial stress-strain states, and cumulative fatigue damage accumulation assessment.

A Primer In Advanced Fatigue Life Prediction Methods

NASA Technical Reports Server (NTRS)

Halford, Gary R.

2000-01-01

Metal fatigue has plagued structural components for centuries, and it remains a critical durability issue in today's aerospace hardware. This is true despite vastly improved and advanced materials, increased mechanistic understanding, and development of accurate structural analysis and advanced fatigue life prediction tools. Each advance is quickly taken advantage of to produce safer, more reliable more cost effective, and better performing products. In other words, as the envelop is expanded, components are then designed to operate just as close to the newly expanded envelop as they were to the initial one. The problem is perennial. The economic importance of addressing structural durability issues early in the design process is emphasized. Tradeoffs with performance, cost, and legislated restrictions are pointed out. Several aspects of structural durability of advanced systems, advanced materials and advanced fatigue life prediction methods are presented. Specific items include the basic elements of durability analysis, conventional designs, barriers to be overcome for advanced systems, high-temperature life prediction for both creep-fatigue and thermomechanical fatigue, mean stress effects, multiaxial stress-strain states, and cumulative fatigue damage accumulation assessment.

Controlling interferometric properties of nanoporous anodic aluminium oxide

PubMed Central

2012-01-01

A study of reflective interference spectroscopy [RIfS] properties of nanoporous anodic aluminium oxide [AAO] with the aim to develop a reliable substrate for label-free optical biosensing is presented. The influence of structural parameters of AAO including pore diameters, inter-pore distance, pore length, and surface modification by deposition of Au, Ag, Cr, Pt, Ni, and TiO2 on the RIfS signal (Fabry-Perot fringe) was explored. AAO with controlled pore dimensions was prepared by electrochemical anodization of aluminium using 0.3 M oxalic acid at different voltages (30 to 70 V) and anodization times (10 to 60 min). Results show the strong influence of pore structures and surface modifications on the interference signal and indicate the importance of optimisation of AAO pore structures for RIfS sensing. The pore length/pore diameter aspect ratio of AAO was identified as a suitable parameter to tune interferometric properties of AAO. Finally, the application of AAO with optimised pore structures for sensing of a surface binding reaction of alkanethiols (mercaptoundecanoic acid) on gold surface is demonstrated. PMID:22280884

Seismic Vibration Control of Elevated Water Tank by TLD and Validation of Full-Scale TLD Model through Real-Time-Hybrid-Testing

NASA Astrophysics Data System (ADS)

Roy, A.; Staino, A.; (D Ghosh, A.; Basu, B.; Chatterjee, S.

2016-09-01

Elevated water tanks (EWTs), being top-heavy structures, are highly vulnerable to earthquake forces, and several have experienced damage/failure in past seismic events. However, as these are critical facilities whose continued performance in the post-earthquake scenario is of vital concern, it is significant to investigate their seismic vibration control using reliable and cost-effective passive dampers such as the Tuned Liquid Damper (TLD). Here, this aspect is studied for flexible EWT structures, such as those with annular shaft supports. The criterion of tuning the sloshing frequency of the TLD to the structural frequency necessitates dimensions of the TLD larger than those hitherto examined in literature. Hence the nonlinear model of the TLD based on established shallow water wave theory is verified for large container size by employing Real-Time-Hybrid-Testing (RTHT). Simulation studies are further carried out on a realistic example of a flexible EWT structure with TLDs. Results indicate that the TLD can be applied very effectively for the seismic vibration mitigation of EWTs.

NASA GRC Fatigue Crack Initiation Life Prediction Models

NASA Astrophysics Data System (ADS)

Arya, Vinod K.; Halford, Gary R.

2002-10-01

Metal fatigue has plagued structural components for centuries, and it remains a critical durability issue in today's aerospace hardware. This is true despite vastly improved and advanced materials, increased mechanistic understanding, and development of accurate structural analysis and advanced fatigue life prediction tools. Each advance is quickly taken advantage of to produce safer, more reliable, more cost effective, and better performing products. In other words, as the envelope is expanded, components are then designed to operate just as close to the newly expanded envelope as they were to the initial one. The problem is perennial. The economic importance of addressing structural durability issues early in the design process is emphasized. Tradeoffs with performance, cost, and legislated restrictions are pointed out. Several aspects of structural durability of advanced systems, advanced materials and advanced fatigue life prediction methods are presented. Specific items include the basic elements of durability analysis, conventional designs, barriers to be overcome for advanced systems, high-temperature life prediction for both creep-fatigue and thermomechanical fatigue, mean stress effects, multiaxial stress-strain states, and cumulative fatigue damage accumulation assessment.

A Generative Angular Model of Protein Structure Evolution

PubMed Central

Golden, Michael; García-Portugués, Eduardo; Sørensen, Michael; Mardia, Kanti V.; Hamelryck, Thomas; Hein, Jotun

2017-01-01

Abstract Recently described stochastic models of protein evolution have demonstrated that the inclusion of structural information in addition to amino acid sequences leads to a more reliable estimation of evolutionary parameters. We present a generative, evolutionary model of protein structure and sequence that is valid on a local length scale. The model concerns the local dependencies between sequence and structure evolution in a pair of homologous proteins. The evolutionary trajectory between the two structures in the protein pair is treated as a random walk in dihedral angle space, which is modeled using a novel angular diffusion process on the two-dimensional torus. Coupling sequence and structure evolution in our model allows for modeling both “smooth” conformational changes and “catastrophic” conformational jumps, conditioned on the amino acid changes. The model has interpretable parameters and is comparatively more realistic than previous stochastic models, providing new insights into the relationship between sequence and structure evolution. For example, using the trained model we were able to identify an apparent sequence–structure evolutionary motif present in a large number of homologous protein pairs. The generative nature of our model enables us to evaluate its validity and its ability to simulate aspects of protein evolution conditioned on an amino acid sequence, a related amino acid sequence, a related structure or any combination thereof. PMID:28453724

Development of a short form of the Japanese version of the Interpersonal Relationship Inventory.

PubMed

Sumi, Katsunori

2009-10-01

The Interpersonal Relationship Inventory (Tilden, Nelson, & May, 1990a) is a 39-item self-report measure to assess three aspects (support, reciprocity, and conflict) of perceived social relationships. In this research, short forms of the Japanese version (Sumi, 2003) of the inventory were developed on the basis of data from two sources. For the item selection, data from 340 Japanese college students (148 women, 192 men; M age = 21.6 yr., SD = 1.6) who completed the original full form of the inventory were used to create three internally consistent short forms. The reliability and construct validity of the short forms were examined upon administering them to among 513 college students (226 women, 287 men; M age =19.9 yr., SD = 1.4). All the subscales of the short forms had acceptable internal consistency (alphas = .70-.90) and test-retest reliability (rs = .72-.81). Confirmatory factor analysis of each short form supported the fact that each form had a three-factor structure. Scores on the subscales shared acceptable overlapping variance with the corresponding subscale scores of the original full form, and these scores were weakly but significantly correlated with the scores for satisfaction with social support, loneliness, and perceived stress. All the short forms had acceptable reliability and construct validity.

Reliability Sampling Plans: A Review and Some New Results

ERIC Educational Resources Information Center

Isaic-Maniu, Alexandru; Voda, Viorel Gh.

2009-01-01

In this work we present a large area of aspects related to the problem of sampling inspection in the case of reliability. First we discuss the actual status of this domain, mentioning the newest approaches (from a technical view point) such as HALT and HASS and the statistical perspective. After a brief description of the general procedure in…

Design, manufacturing and tests of first cryogen-free MgB2 prototype coils for offshore wind generators

NASA Astrophysics Data System (ADS)

Sarmiento, G.; Sanz, S.; Pujana, A.; Merino, J. M.; Iturbe, R.; Apiñaniz, S.; Nardelli, D.; Marino, I.

2014-05-01

Although renewable sector has started to take advantage of the offshore wind energy recently, the development is very intense. Turbines reliability, size, and cost are key aspects for the wind industry, especially in marine locations. A superconducting generator will allow a significant reduction in terms of weight and size, but cost and reliability are two aspects to deal with. MgB2 wire is presented as one promising option to be used in superconducting coils for wind generators. This work shows the experimental results in first cryogen-free MgB2 prototype coils, designed according to specific requirements of TECNALIA's wind generator concept.

System reliability approaches for advanced propulsion system structures

NASA Technical Reports Server (NTRS)

Cruse, T. A.; Mahadevan, S.

1991-01-01

This paper identifies significant issues that pertain to the estimation and use of system reliability in the design of advanced propulsion system structures. Linkages between the reliabilities of individual components and their effect on system design issues such as performance, cost, availability, and certification are examined. The need for system reliability computation to address the continuum nature of propulsion system structures and synergistic progressive damage modes has been highlighted. Available system reliability models are observed to apply only to discrete systems. Therefore a sequential structural reanalysis procedure is formulated to rigorously compute the conditional dependencies between various failure modes. The method is developed in a manner that supports both top-down and bottom-up analyses in system reliability.

Frustration in Biomolecules

PubMed Central

Ferreiro, Diego U.; Komives, Elizabeth A.; Wolynes, Peter G.

2014-01-01

Biomolecules are the prime information processing elements of living matter. Most of these inanimate systems are polymers that compute their own structures and dynamics using as input seemingly random character strings of their sequence, following which they coalesce and perform integrated cellular functions. In large computational systems with a finite interaction-codes, the appearance of conflicting goals is inevitable. Simple conflicting forces can lead to quite complex structures and behaviors, leading to the concept of frustration in condensed matter. We present here some basic ideas about frustration in biomolecules and how the frustration concept leads to a better appreciation of many aspects of the architecture of biomolecules, and how biomolecular structure connects to function. These ideas are simultaneously both seductively simple and perilously subtle to grasp completely. The energy landscape theory of protein folding provides a framework for quantifying frustration in large systems and has been implemented at many levels of description. We first review the notion of frustration from the areas of abstract logic and its uses in simple condensed matter systems. We discuss then how the frustration concept applies specifically to heteropolymers, testing folding landscape theory in computer simulations of protein models and in experimentally accessible systems. Studying the aspects of frustration averaged over many proteins provides ways to infer energy functions useful for reliable structure prediction. We discuss how frustration affects folding mechanisms. We review here how a large part of the biological functions of proteins are related to subtle local physical frustration effects and how frustration influences the appearance of metastable states, the nature of binding processes, catalysis and allosteric transitions. We hope to illustrate how Frustration is a fundamental concept in relating function to structural biology. PMID:25225856

Progress in GaN devices performances and reliability

NASA Astrophysics Data System (ADS)

Saunier, P.; Lee, C.; Jimenez, J.; Balistreri, A.; Dumka, D.; Tserng, H. Q.; Kao, M. Y.; Chowdhury, U.; Chao, P. C.; Chu, K.; Souzis, A.; Eliashevich, I.; Guo, S.; del Alamo, J.; Joh, J.; Shur, M.

2008-02-01

With the DARPA Wide Bandgap Semiconductor Technology RF Thrust Contract, TriQuint Semiconductor and its partners, BAE Systems, Lockheed Martin, IQE-RF, II-VI, Nitronex, M.I.T., and R.P.I. are achieving great progress towards the overall goal of making Gallium Nitride a revolutionary RF technology ready to be inserted in defense and commercial applications. Performance and reliability are two critical components of success (along with cost and manufacturability). In this paper we will discuss these two aspects. Our emphasis is now operation at 40 V bias voltage (we had been working at 28 V). 1250 µm devices have power densities in the 6 to 9 W/mm with associated efficiencies in the low- to mid 60 % and associated gain in the 12 to 12.5 dB at 10 GHz. We are using a dual field-plate structure to optimize these performances. Very good performances have also been achieved at 18 GHz with 400 µm devices. Excellent progress has been made in reliability. Our preliminary DC and RF reliability tests at 40 V indicate a MTTF of 1E6hrs with1.3 eV activation energy at 150 0C channel temperature. Jesus Del Alamo at MIT has greatly refined our initial findings leading to a strain related theory of degradation that is driven by electric fields. Degradation can occur on the drain edge of the gate due to excessive strain given by inverse piezoelectric effect.

Cultural Adaptation of the Cardiff Acne Disability Index to a Hindi Speaking Population: A Pilot Study.

PubMed

Gupta, Aayush; Sharma, Yugal K; Dash, K; Verma, Sampurna

2015-01-01

Acne vulgaris is known to impair many aspects of the quality of life (QoL) of its patients. To translate the Cardiff Acne Disability Index (CADI) from English into Hindi and to assess its validity and reliability in Hindi speaking patients with acne from India. Hindi version of CADI, translated and linguistically validated as per published international guidelines, along with a previously translated Hindi version of dermatology life quality index (DLQI) and a demographic questionnaire were administered to acne patients. The internal consistency reliability of the Hindi version of CADI and its concurrent validity were assessed by Cronbach's alpha co-efficient and Spearman's correlation co-efficient respectively. Construct validity was examined by factor analysis. Statistical analysis was carried out using the Statistical Package for the Social Sciences (SPSS) version 20 (SPSS Inc., Chicago, IL, USA) for Windows. One hundred Hindi speaking patients with various grades of acne participated in the study. Hindi version of CADI showed high internal consistency reliability (Cronbach's alpha co-efficient = 0.722). Mean item-to-total correlation co-efficient ranged from 0.502 to 0.760. Concurrent validity of the scale was supported by a significant correlation with the Hindi DLQI. Factor analysis revealed the presence of two dimensions underlying the factor structure of the scale. Hindi CADI is equivalent to the original English version and constitutes a reliable and valid tool for clinical assessment of the impact of acne on QoL.

End-stage dementia spark of life: reliability and validity of the "GATOS" questionnaire.

PubMed

Tsoucalas, Gregory; Bourelia, Stamati; Kalogirou, Vaso; Giatsiou, Styliani; Mavrogiannaki, Eirini; Gatos, Georgios; Galanos, Antonis; Repana, Olga; Iliadou, Eleni; Antoniou, Antonis; Sgantzos, Markos; Gatos, Konstantinos

2015-01-01

Fl oor effects are present in most dementia assessment tools as dementia progresses and the in-depth assessment of patients considered more or less on vegetative state is questionable. To develop a questionnaire (the "Gatos Clinical Test-GCT") for the assessment of end-stage demented patients. Five hundred patients with dementia of various causes and an MMSE score between 0 and 2 were enrolled in the study. The GCT consists of 14 closed type questions rated on a Likert scale. The total score is used to evaluate patient's dementia. Various aspects of validity and reliability (including face, content and structural validity as well as test-retest reliability) were examined. Three subscales "Autonomy/Alertness", "Gnosias" and "Somatokinetic function" were defined, with a Cronbach equal to 0.851, 0.756 and 0.598 respectively. The GCT subscales and total score were statistically significant higher in patients with MMSE score 1 or 2 compared with those with MMSE score 0 (p<0.0005). Patients with GCT total score less than 12.5 had 75% probability to have zero MMSE score. The "GATOS" questionnaire is a valid and reliable test for patients with severe dementia, aiming at identification of those patients who could sustain some quality of life. It is a relatively short and easy to administer tool. As dementia prevalence is expected to rise further worldwide we believe that GCT could offer valuable services to health professionals, caregivers and patients.

Recent advances in computational structural reliability analysis methods

NASA Astrophysics Data System (ADS)

Thacker, Ben H.; Wu, Y.-T.; Millwater, Harry R.; Torng, Tony Y.; Riha, David S.

1993-10-01

The goal of structural reliability analysis is to determine the probability that the structure will adequately perform its intended function when operating under the given environmental conditions. Thus, the notion of reliability admits the possibility of failure. Given the fact that many different modes of failure are usually possible, achievement of this goal is a formidable task, especially for large, complex structural systems. The traditional (deterministic) design methodology attempts to assure reliability by the application of safety factors and conservative assumptions. However, the safety factor approach lacks a quantitative basis in that the level of reliability is never known and usually results in overly conservative designs because of compounding conservatisms. Furthermore, problem parameters that control the reliability are not identified, nor their importance evaluated. A summary of recent advances in computational structural reliability assessment is presented. A significant level of activity in the research and development community was seen recently, much of which was directed towards the prediction of failure probabilities for single mode failures. The focus is to present some early results and demonstrations of advanced reliability methods applied to structural system problems. This includes structures that can fail as a result of multiple component failures (e.g., a redundant truss), or structural components that may fail due to multiple interacting failure modes (e.g., excessive deflection, resonate vibration, or creep rupture). From these results, some observations and recommendations are made with regard to future research needs.

Recent advances in computational structural reliability analysis methods

NASA Technical Reports Server (NTRS)

Thacker, Ben H.; Wu, Y.-T.; Millwater, Harry R.; Torng, Tony Y.; Riha, David S.

1993-01-01

The goal of structural reliability analysis is to determine the probability that the structure will adequately perform its intended function when operating under the given environmental conditions. Thus, the notion of reliability admits the possibility of failure. Given the fact that many different modes of failure are usually possible, achievement of this goal is a formidable task, especially for large, complex structural systems. The traditional (deterministic) design methodology attempts to assure reliability by the application of safety factors and conservative assumptions. However, the safety factor approach lacks a quantitative basis in that the level of reliability is never known and usually results in overly conservative designs because of compounding conservatisms. Furthermore, problem parameters that control the reliability are not identified, nor their importance evaluated. A summary of recent advances in computational structural reliability assessment is presented. A significant level of activity in the research and development community was seen recently, much of which was directed towards the prediction of failure probabilities for single mode failures. The focus is to present some early results and demonstrations of advanced reliability methods applied to structural system problems. This includes structures that can fail as a result of multiple component failures (e.g., a redundant truss), or structural components that may fail due to multiple interacting failure modes (e.g., excessive deflection, resonate vibration, or creep rupture). From these results, some observations and recommendations are made with regard to future research needs.

Doctoral Studies in Romania: Admission Procedures, Social, and Legal Aspects of Doctoral Training

ERIC Educational Resources Information Center

Miclea, Mircea

2008-01-01

This contribution presents a concise and up-to-date report of doctoral studies in Romania, with a special emphasis on legal and social aspects. The author also argues that in order to be sustainable, the reform of doctoral studies should be substantiated by the differentiation of universities, reliable post-doctoral programmes, and a substantive…

Impact detection method for composite winglets based on neural network implementation

NASA Astrophysics Data System (ADS)

Viscardi, Massimo; Arena, Maurizio; Napolitano, Pasquale

2018-03-01

Maintenance tasks and safety aspects represent a strategic role in the managing of the modern aircraft fleets. The demand for reliable techniques for structural health monitoring represent so a key aspect looking forward to new generation aircraft. In particular, the use of more technologically complex materials and manufacturing methods requires anyway more efficient as well as rapid application processes to improve the design strength and service life. Actually, it is necessary to rely on survey instruments, which allow for safeguarding the structural integrity of the aircraft, especially after the wide use of composite structures highly susceptible to non-detected damages as delamination of the ply. In this paper, the authors have investigated the feasibility to implement a neural network-based algorithm to predict the impact event at low frequency, typically due to the bird collision. Relying upon a numerical model, representative of a composite flat panel, the approach has been also experimentally validated. The purpose of the work is therefore the presentation of an innovative application within the Non Destructive Testing field based upon vibration measurements. The aim of the research has been the development of a Non Destructive Test which meets most of the mandatory requirements for effective health monitoring systems while, at the same time, reducing as much as possible the complexity of the data analysis algorithm and the experimental acquisition instrumentation. Future activities will be addressed to test such technique on a more complex aeronautical system.

Comparative Reliability of Structured Versus Unstructured Interviews in the Admission Process of a Residency Program

PubMed Central

Blouin, Danielle; Day, Andrew G.; Pavlov, Andrey

2011-01-01

Background Although never directly compared, structured interviews are reported as being more reliable than unstructured interviews. This study compared the reliability of both types of interview when applied to a common pool of applicants for positions in an emergency medicine residency program. Methods In 2008, one structured interview was added to the two unstructured interviews traditionally used in our resident selection process. A formal job analysis using the critical incident technique guided the development of the structured interview tool. This tool consisted of 7 scenarios assessing 4 of the domains deemed essential for success as a resident in this program. The traditional interview tool assessed 5 general criteria. In addition to these criteria, the unstructured panel members were asked to rate each candidate on the same 4 essential domains rated by the structured panel members. All 3 panels interviewed all candidates. Main outcomes were the overall, interitem, and interrater reliabilities, the correlations between interview panels, and the dimensionality of each interview tool. Results Thirty candidates were interviewed. The overall reliability reached 0.43 for the structured interview, and 0.81 and 0.71 for the unstructured interviews. Analyses of the variance components showed a high interrater, low interitem reliability for the structured interview, and a high interrater, high interitem reliability for the unstructured interviews. The summary measures from the 2 unstructured interviews were significantly correlated, but neither was correlated with the structured interview. Only the structured interview was multidimensional. Conclusions A structured interview did not yield a higher overall reliability than both unstructured interviews. The lower reliability is explained by a lower interitem reliability, which in turn is due to the multidimensionality of the interview tool. Both unstructured panels consistently rated a single dimension, even when prompted to assess the 4 specific domains established as essential to succeed in this residency program. PMID:23205201

Comparative reliability of structured versus unstructured interviews in the admission process of a residency program.

PubMed

Blouin, Danielle; Day, Andrew G; Pavlov, Andrey

2011-12-01

Although never directly compared, structured interviews are reported as being more reliable than unstructured interviews. This study compared the reliability of both types of interview when applied to a common pool of applicants for positions in an emergency medicine residency program. In 2008, one structured interview was added to the two unstructured interviews traditionally used in our resident selection process. A formal job analysis using the critical incident technique guided the development of the structured interview tool. This tool consisted of 7 scenarios assessing 4 of the domains deemed essential for success as a resident in this program. The traditional interview tool assessed 5 general criteria. In addition to these criteria, the unstructured panel members were asked to rate each candidate on the same 4 essential domains rated by the structured panel members. All 3 panels interviewed all candidates. Main outcomes were the overall, interitem, and interrater reliabilities, the correlations between interview panels, and the dimensionality of each interview tool. Thirty candidates were interviewed. The overall reliability reached 0.43 for the structured interview, and 0.81 and 0.71 for the unstructured interviews. Analyses of the variance components showed a high interrater, low interitem reliability for the structured interview, and a high interrater, high interitem reliability for the unstructured interviews. The summary measures from the 2 unstructured interviews were significantly correlated, but neither was correlated with the structured interview. Only the structured interview was multidimensional. A structured interview did not yield a higher overall reliability than both unstructured interviews. The lower reliability is explained by a lower interitem reliability, which in turn is due to the multidimensionality of the interview tool. Both unstructured panels consistently rated a single dimension, even when prompted to assess the 4 specific domains established as essential to succeed in this residency program.

Assessing the competences associated with a nursing Bachelor thesis by means of rubrics.

PubMed

Llaurado-Serra, M; Rodríguez, E; Gallart, A; Fuster, P; Monforte-Royo, C; De Juan, M Á

2018-07-01

Writing a Bachelor thesis is the last step in obtaining a university degree. The thesis may be job- or research-orientated, but it must demonstrate certain degree-level competences. Rubrics are a useful way of unifying the assessment criteria. To design a system of rubrics for assessing the competences associated with the Bachelor thesis of a nursing degree, to examine the system's reliability and validity and to analyse results in relation to the final thesis mark. Cross-sectional and psychometric study conducted between 2012 and 2014. Nursing degree at a Spanish university. Twelve tutors who designed the system of rubrics. Students (n = 76) who wrote their Bachelor thesis during the 2013-2014 academic year. After deciding which aspects would be assessed, who would assess them and when, the tutors developed seven rubrics (drafting process, assessment of the written thesis by the supervisor and by a panel, student self-assessment, peer assessment, tutor evaluation of the peer assessment and panel assessment of the viva). We analysed the reliability (inter-rater and internal consistency) and validity (convergent and discriminant) of the rubrics, and also the relationship between the competences assessed and the final thesis mark. All the rubrics had internal consistency coefficients >0.80. The rubric for oral communication skills (viva) yielded inter-rater reliability of 0.95. Factor analysis indicated a unidimensional structure for all but one of the rubrics, the exception being the rubric for peer assessment, which had a two-factor structure. The main competences associated with a good quality Bachelor thesis were written communication skills and the ability to work independently. The assessment system based on seven rubrics is shown to be valid and reliable. Writing a Bachelor thesis requires a range of degree-level competences and it offers nursing students the opportunity to develop their evidence-based practice skills. Copyright © 2018 Elsevier Ltd. All rights reserved.

Factor structure, reliability, and validity of the Japanese version of the Hoarding Rating Scale-Self-Report (HRS-SR-J).

PubMed

Tsuchiyagaito, Aki; Horiuchi, Satoshi; Igarashi, Toko; Kawanori, Yoshiya; Hirano, Yoshiyuki; Yabe, Hirooki; Nakagawa, Akiko

2017-01-01

The Hoarding Rating Scale-Self-Report (HRS-SR) is a five-item scale that assesses the symptoms of hoarding. These symptoms include excessive acquisition, difficulty in discarding, and excessive clutter that causes distress. We conducted three studies to examine the factor structure, reliability, and validity of the Japanese version of the HRS-SR (HRS-SR-J). Study 1 examined its reliability; 193 college students and 320 adolescents and adults completed the HRS-SR-J and, of the college students, 32 took it again 2 weeks later. Study 2 aimed to confirm that its scores in a sample of 210 adolescents and adults are independent of social desirability. Study 3 aimed to validate the HRS-SR-J in the aspects of convergent and discriminant validity in a sample of 550 adults. The HRS-SR-J showed good internal consistency and 2-week test-retest reliability. Based on the nonsignificant correlations between the HRS-SR-J and social desirability, the HRS-SR-J was not strongly affected by social desirability. In addition, it also had a good convergent validity with the Japanese version of the Saving Inventory-Revised (SI-R-J) and the hoarding subscale of the Obsessive-Compulsive Inventory, while having a significantly weaker correlation with the five subscales of the Obsessive-Compulsive Inventory, except for the hoarding subscale. In addition, the strength of the correlation between the HRS-SR-J and the Japanese version of the Patient Health Questionnaire-9 and that between the HRS-SR-J and the Generalized Anxiety Disorder-7 were significantly weaker than the correlation between the HRS-SR-J and the SI-R-J. These results demonstrate that the HRS-SR-J has good convergent and discriminant validity. The HRS-SR-J is a notable self-report scale for examining the severity of hoarding symptoms.

Development of a validated questionnaire to measure the self-perceived competence of primary health professionals in providing nutrition care to patients with chronic disease.

PubMed

Ball, Lauren E; Leveritt, Michael D

2015-12-01

Nutrition is an important aspect of chronic disease prevention and management by primary health professionals, including GPs, dietitians, practice nurses, diabetes educators and exercise professionals. In order to better understand how to improve the delivery of nutrition care, it is important to have valid and reliable tools to measure self-perceived competence. This study aimed to develop a valid, structured, questionnaire that measures the self-perceived competence of primary health professionals to provide nutrition care to patients with chronic disease. The development of the questionnaire was carried out in four stages (1): preparation of scope and structure, through a literature review and consultation with an expert reference group (2); development of questionnaire items, which were refined through feedback from the reference group and 18 primary health professionals (3); investigation of internal consistency and concurrent validity through a pilot study on 118 primary health professionals (4) and investigation of test-retest reliability through a pilot study on 33 primary health professionals who completed the questionnaire twice, 2-3 weeks apart. Stages 1 and 2 resulted in four constructs and 35 questions in the questionnaire. Stage 3 confirmed internal consistency, with Cronbach's α ranging from 0.88 to 0.98 for each construct and 0.98 for all items combined. Dietitians scored significantly higher than speech pathologists (P < 0.05) in each construct, confirming concurrent validity. Stage 4 confirmed test-retest reliability, with correlation coefficients ranging from 0.89 to 0.94 for each construct and 0.95 for all items combined. The NUTrition COMPetence (NUTCOMP) questionnaire is a valid, reliable and suitable tool that can be used to directly inform professional development and identify opportunities to support safe and effective practice. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Methods Used to Streamline the CAHPS® Hospital Survey

PubMed Central

Keller, San; O'Malley, A James; Hays, Ron D; Matthew, Rebecca A; Zaslavsky, Alan M; Hepner, Kimberly A; Cleary, Paul D

2005-01-01

Objective To identify a parsimonious subset of reliable, valid, and consumer-salient items from 33 questions asking for patient reports about hospital care quality. Data Source CAHPS® Hospital Survey pilot data were collected during the summer of 2003 using mail and telephone from 19,720 patients who had been treated in 132 hospitals in three states and discharged from November 2002 to January 2003. Methods Standard psychometric methods were used to assess the reliability (internal consistency reliability and hospital-level reliability) and construct validity (exploratory and confirmatory factor analyses, strength of relationship to overall rating of hospital) of the 33 report items. The best subset of items from among the 33 was selected based on their statistical properties in conjunction with the importance assigned to each item by participants in 14 focus groups. Principal Findings Confirmatory factor analysis (CFA) indicated that a subset of 16 questions proposed to measure seven aspects of hospital care (communication with nurses, communication with doctors, responsiveness to patient needs, physical environment, pain control, communication about medication, and discharge information) demonstrated excellent fit to the data. Scales in each of these areas had acceptable levels of reliability to discriminate among hospitals and internal consistency reliability estimates comparable with previously developed CAHPS instruments. Conclusion Although half the length of the original, the shorter CAHPS hospital survey demonstrates promising measurement properties, identifies variations in care among hospitals, and deals with aspects of the hospital stay that are important to patients' evaluations of care quality. PMID:16316438

Instruments to assess patients with rotator cuff pathology: a systematic review of measurement properties.

PubMed

Longo, Umile Giuseppe; Saris, Daniël; Poolman, Rudolf W; Berton, Alessandra; Denaro, Vincenzo

2012-10-01

The aims of this study were to obtain an overview of the methodological quality of studies on the measurement properties of rotator cuff questionnaires and to describe how well various aspects of the design and statistical analyses of studies on measurement properties are performed. A systematic review of published studies on the measurement properties of rotator cuff questionnaires was performed. Two investigators independently rated the quality of the studies using the Consensus-based Standards for the selection of health Measurement Instruments checklist. This checklist was developed in an international Delphi consensus study. Sixteen studies were included, in which two measurement instruments were evaluated, namely the Western Ontario Rotator Cuff Index and the Rotator Cuff Quality-of-Life Measure. The methodological quality of the included studies was adequate on some properties (construct validity, reliability, responsiveness, internal consistency, and translation) but need to be improved on other aspects. The most important methodological aspects that need to be developed are as follows: measurement error, content validity, structural validity, cross-cultural validity, criterion validity, and interpretability. Considering the importance of adequate measurement properties, it is concluded that, in the field of rotator cuff pathology, there is room for improvement in the methodological quality of studies measurement properties. II.

Making Best Practice Standard--And Lasting

ERIC Educational Resources Information Center

Stringfield, Sam; Reynolds, David; Schaffer, Eugene

2012-01-01

If our schools were a research project, we'd say that while some aspects of our schools are highly valid, our overall academic systems aren't reliable. If educators are to meet the challenge of leaving no child behind, schools will have to improve with much greater reliability. In the mid-1990s, a group of British secondary schools decided to work…

The Screening Test for Emotional Problems--Teacher-Report Version (Step-T): Studies of Reliability and Validity

ERIC Educational Resources Information Center

Erford, Bradley T.; Butler, Caitlin; Peacock, Elizabeth

2015-01-01

The Screening Test for Emotional Problems-Teacher Version (STEP-T) was designed to identify students aged 7-17 years with wide-ranging emotional disturbances. Coefficients alpha and test-retest reliability were adequate for all subscales except Anxiety. The hypothesized five-factor model fit the data very well and external aspects of validity were…

Is It Really Possible to Test All Educationally Significant Achievements with High Levels of Reliability?

ERIC Educational Resources Information Center

Davis, Andrew

2015-01-01

PISA claims that it can extend its reach from its current core subjects of Reading, Science, Maths and problem-solving. Yet given the requirement for high levels of reliability for PISA, especially in the light of its current high stakes character, proposed widening of its subject coverage cannot embrace some important aspects of the social and…

Fault diagnostic instrumentation design for environmental control and life support systems

NASA Technical Reports Server (NTRS)

Yang, P. Y.; You, K. C.; Wynveen, R. A.; Powell, J. D., Jr.

1979-01-01

As a development phase moves toward flight hardware, the system availability becomes an important design aspect which requires high reliability and maintainability. As part of continous development efforts, a program to evaluate, design, and demonstrate advanced instrumentation fault diagnostics was successfully completed. Fault tolerance designs for reliability and other instrumenation capabilities to increase maintainability were evaluated and studied.

The Evaluation of a Screening Tool for Children with an Intellectual Disability: The Child and Adolescent Intellectual Disability Screening Questionnaire

ERIC Educational Resources Information Center

McKenzie, Karen; Paxton, Donna; Murray, George; Milanesi, Paula; Murray, Aja Louise

2012-01-01

The study outlines the evaluation of an intellectual disability screening tool, the "Child and Adolescent Intellectual Disability Screening Questionnaire" ("CAIDS-Q"), with two age groups. A number of aspects of the reliability and validity of the "CAIDS-Q" were assessed for these two groups, including inter-rater reliability, convergent and…

Reliability Analysis of Sealing Structure of Electromechanical System Based on Kriging Model

NASA Astrophysics Data System (ADS)

Zhang, F.; Wang, Y. M.; Chen, R. W.; Deng, W. W.; Gao, Y.

2018-05-01

The sealing performance of aircraft electromechanical system has a great influence on flight safety, and the reliability of its typical seal structure is analyzed by researcher. In this paper, we regard reciprocating seal structure as a research object to study structural reliability. Having been based on the finite element numerical simulation method, the contact stress between the rubber sealing ring and the cylinder wall is calculated, and the relationship between the contact stress and the pressure of the hydraulic medium is built, and the friction force on different working conditions are compared. Through the co-simulation, the adaptive Kriging model obtained by EFF learning mechanism is used to describe the failure probability of the seal ring, so as to evaluate the reliability of the sealing structure. This article proposes a new idea of numerical evaluation for the reliability analysis of sealing structure, and also provides a theoretical basis for the optimal design of sealing structure.

Human-In-The-Loop Simulation in Support of Long-Term Sustainability of Light Water Reactors

DOE PAGES

Hallbert, Bruce P

2015-01-01

Reliable instrumentation, information, and control systems technologies are essential to ensuring safe and efficient operation of the U.S. light water reactor (LWR) fleet. These technologies affect every aspect of nuclear power plant (NPP) and balance-of-plant operations. In 1997, the National Research Council conducted a study concerning the challenges involved in modernization of digital instrumentation and control systems in NPPs. Their findings identified the need for new II&C technology integration. The NPP owners and operators realize that this analog technology represents a significant challenge to sustaining the operation of the current fleet of NPPs. Beyond control systems, new technologies are neededmore » to monitor and characterize the effects of aging and degradation in critical areas of key structures, systems, and components. The objective of the efforts sponsored by the U.S. Department of Energy is to develop, demonstrate, and deploy new digital technologies for II&C architectures and provide monitoring capabilities to ensure the continued safe, reliable, and economic operation of the nation’s NPPs.« less

Agreement and reliability of pelvic floor measurements during contraction using three-dimensional pelvic floor ultrasound and virtual reality.

PubMed

Speksnijder, L; Rousian, M; Steegers, E A P; Van Der Spek, P J; Koning, A H J; Steensma, A B

2012-07-01

Virtual reality is a novel method of visualizing ultrasound data with the perception of depth and offers possibilities for measuring non-planar structures. The levator ani hiatus has both convex and concave aspects. The aim of this study was to compare levator ani hiatus volume measurements obtained with conventional three-dimensional (3D) ultrasound and with a virtual reality measurement technique and to establish their reliability and agreement. 100 symptomatic patients visiting a tertiary pelvic floor clinic with a normal intact levator ani muscle diagnosed on translabial ultrasound were selected. Datasets were analyzed using a rendered volume with a slice thickness of 1.5 cm at the level of minimal hiatal dimensions during contraction. The levator area (in cm(2)) was measured and multiplied by 1.5 to get the levator ani hiatus volume in conventional 3D ultrasound (in cm(3)). Levator ani hiatus volume measurements were then measured semi-automatically in virtual reality (cm(3) ) using a segmentation algorithm. An intra- and interobserver analysis of reliability and agreement was performed in 20 randomly chosen patients. The mean difference between levator ani hiatus volume measurements performed using conventional 3D ultrasound and virtual reality was 0.10 (95% CI, - 0.15 to 0.35) cm(3). The intraclass correlation coefficient (ICC) comparing conventional 3D ultrasound with virtual reality measurements was > 0.96. Intra- and interobserver ICCs for conventional 3D ultrasound measurements were > 0.94 and for virtual reality measurements were > 0.97, indicating good reliability for both. Levator ani hiatus volume measurements performed using virtual reality were reliable and the results were similar to those obtained with conventional 3D ultrasonography. Copyright © 2012 ISUOG. Published by John Wiley & Sons, Ltd.

Illustrated structural application of universal first-order reliability method

NASA Technical Reports Server (NTRS)

Verderaime, V.

1994-01-01

The general application of the proposed first-order reliability method was achieved through the universal normalization of engineering probability distribution data. The method superimposes prevailing deterministic techniques and practices on the first-order reliability method to surmount deficiencies of the deterministic method and provide benefits of reliability techniques and predictions. A reliability design factor is derived from the reliability criterion to satisfy a specified reliability and is analogous to the deterministic safety factor. Its application is numerically illustrated on several practical structural design and verification cases with interesting results and insights. Two concepts of reliability selection criteria are suggested. Though the method was developed to support affordable structures for access to space, the method should also be applicable for most high-performance air and surface transportation systems.

[Depression, anxiety and stress scales: DASS--A screening procedure not only for pain patients].

PubMed

Nilges, P; Essau, C

2015-12-01

The assessment of mental distress is a central aspect in pain research and treatment. Particularly for depression the comorbidity with pain poses methodological and conceptual challenges. This study examined the psychometric properties of the short version of the depression, anxiety and stress scale (DASS), used in both pain research and treatment and constructed to overcome the particular problems by omitting somatic items and concentrating on the psychological core aspects of depression, anxiety and stress. The psychometric properties of the DASS-21 were compared between patients with pain and various people without any pain problems (N = 950). The DASS has three subscales, depression, anxiety and stress, each with seven items. The construct validity of the DASS was examined using the hospital anxiety and depression scale (HADS) for anxiety and depression and the general depression scale (Allgemeine Depressionsskala, ADS) for depression. The sensitivity and specificity for depression were determined against a structured interview for diagnostic and statistical manual of mental disorders (DSM-IV) and compared with the Center for Epidemiological Studies depression scale (CESD) and HADS in pain patients. Cronbach's alpha of the DASS for the depression subscale was at least 0.91, while the anxiety and stress subscales had Cronbach alphas of 0.78-0.82 and 0.81-0.89, respectively. Although the depression subscale has only 7 items, it is just as reliable as the ADS with 21 items. It also has a better sensitivity and specificity than the HADS in identifying clinical patients with depression. The DASS is a reliable questionnaire, free to use and brief to administer; therefore, it is an alternative to the previously used instruments for the screening of depression. Furthermore, the subscale stress measures irritability and tension, which are important aspects of pain experience but underused in assessment procedures for the diagnosis and treatment evaluation of patients with pain.

Perineal trauma: prevention and treatment.

PubMed

McCandlish, R

2001-01-01

This article examines two aspects of routine midwifery practice: management of the perineum at the end of the second stage of labor and management and repair of perineal injury. Although some aspects of perineal management and repair have been researched and there is reliable evidence on which to base practice, there remains a considerable and urgent collaborative clinical research agenda that midwives should actively pursue.

Psychometric Properties of a Russian Version of the Cognitive Flexibility Inventory (CFI-R).

PubMed

Kurginyan, Sergey S; Osavolyuk, Ekaterina Y

2018-01-01

The Cognitive Flexibility Inventory (CFI) is a brief self-report measure of the type of cognitive flexibility (CF) necessary to successfully challenge and restructure maladaptive beliefs with more balanced and adaptive thinking; it is particularly popular for use with English speakers. The CFI has recently been translated into five languages (Chinese, Japanese, Iranian, Turkish, and Russian), although estimates of reliability and validity of these translated versions are scarce. This study reports on the factor structure, internal consistency, reliability, and construct validity of the CFI. We adopted the CFI for a Russian-speaking population, using student sample of 445 first and second-year undergraduates ( M = 18.59 years, SD = 1.19) and found that a two-factor model fitted the data well. However, the structure of the CFI was revised because of some modifications, which were made to the original English to match the Russian equivalents of items originally developed to assess the definite aspect of cognitive flexibility. The CFI-R showed good internal consistency and suitable 7-week test-retest reliability. The construct validity of the Russian version of the CFI was studied by computing correlations with other related measures of CF (Attributional Style Questionnaire), depressive symptoms (Beck Depression Inventory), coping (Ways of Coping (Revised), and rigidity (Tomsk Rigidity Questionnaire). Furthermore, to assess whether the construct validity were affected by psychopathology we examined results for non-clinical and clinical samples, using "known-groups" method. The clinical sample reported lower CF than did the non-clinical sample on the CFI-R's total score and its subscales' scores. Findings in the present study suggest that the psychometric properties of the Russian CFI are comparable to the English original, making it appropriate to research assessment of the type of CF in Russian speaking population.

Verification of Ceramic Structures

NASA Astrophysics Data System (ADS)

Behar-Lafenetre, Stephanie; Cornillon, Laurence; Rancurel, Michael; De Graaf, Dennis; Hartmann, Peter; Coe, Graham; Laine, Benoit

2012-07-01

In the framework of the “Mechanical Design and Verification Methodologies for Ceramic Structures” contract [1] awarded by ESA, Thales Alenia Space has investigated literature and practices in affiliated industries to propose a methodological guideline for verification of ceramic spacecraft and instrument structures. It has been written in order to be applicable to most types of ceramic or glass-ceramic materials - typically Cesic®, HBCesic®, Silicon Nitride, Silicon Carbide and ZERODUR®. The proposed guideline describes the activities to be performed at material level in order to cover all the specific aspects of ceramics (Weibull distribution, brittle behaviour, sub-critical crack growth). Elementary tests and their post-processing methods are described, and recommendations for optimization of the test plan are given in order to have a consistent database. The application of this method is shown on an example in a dedicated article [7]. Then the verification activities to be performed at system level are described. This includes classical verification activities based on relevant standard (ECSS Verification [4]), plus specific analytical, testing and inspection features. The analysis methodology takes into account the specific behaviour of ceramic materials, especially the statistical distribution of failures (Weibull) and the method to transfer it from elementary data to a full-scale structure. The demonstration of the efficiency of this method is described in a dedicated article [8]. The verification is completed by classical full-scale testing activities. Indications about proof testing, case of use and implementation are given and specific inspection and protection measures are described. These additional activities are necessary to ensure the required reliability. The aim of the guideline is to describe how to reach the same reliability level as for structures made of more classical materials (metals, composites).

Statistical modeling of software reliability

NASA Technical Reports Server (NTRS)

Miller, Douglas R.

1992-01-01

This working paper discusses the statistical simulation part of a controlled software development experiment being conducted under the direction of the System Validation Methods Branch, Information Systems Division, NASA Langley Research Center. The experiment uses guidance and control software (GCS) aboard a fictitious planetary landing spacecraft: real-time control software operating on a transient mission. Software execution is simulated to study the statistical aspects of reliability and other failure characteristics of the software during development, testing, and random usage. Quantification of software reliability is a major goal. Various reliability concepts are discussed. Experiments are described for performing simulations and collecting appropriate simulated software performance and failure data. This data is then used to make statistical inferences about the quality of the software development and verification processes as well as inferences about the reliability of software versions and reliability growth under random testing and debugging.

Tracking prominent points in image sequences

NASA Astrophysics Data System (ADS)

Hahn, Michael

1994-03-01

Measuring image motion and inferring scene geometry and camera motion are main aspects of image sequence analysis. The determination of image motion and the structure-from-motion problem are tasks that can be addressed independently or in cooperative processes. In this paper we focus on tracking prominent points. High stability, reliability, and accuracy are criteria for the extraction of prominent points. This implies that tracking should work quite well with those features; unfortunately, the reality looks quite different. In the experimental investigations we processed a long sequence of 128 images. This mono sequence is taken in an outdoor environment at the experimental field of Mercedes Benz in Rastatt. Different tracking schemes are explored and the results with respect to stability and quality are reported.

Control-based method to identify underlying delays of a nonlinear dynamical system.

PubMed

Yu, Dongchuan; Frasca, Mattia; Liu, Fang

2008-10-01

We suggest several stationary state control-based delay identification methods which do not require any structural information about the controlled systems and are applicable to systems described by delayed ordinary differential equations. This proposed technique includes three steps: (i) driving a system to a steady state; (ii) perturbing the control signal for shifting the steady state; and (iii) identifying all delays by detecting the time that the system is abruptly drawn out of stationarity. Some aspects especially important for applications are discussed as well, including interaction delay identification, stationary state convergence speed, performance comparison, and the influence of noise on delay identification. Several examples are presented to illustrate the reliability and robustness of all delay identification methods suggested.

Assessment of mindfulness by self-report: the Kentucky inventory of mindfulness skills.

PubMed

Baer, Ruth A; Smith, Gregory T; Allen, Kristin B

2004-09-01

A self-report inventory for the assessment of mindfulness skills was developed, and its psychometric characteristics and relationships with other constructs were examined. Participants included three samples of undergraduate students and a sample of outpatients with borderline personality disorder Based on discussions of mindfulness in the current literature, four mindfulness skills were specified: observing, describing, acting with awareness, and accepting without judgment. Scales designed to measure each skill were developed and evaluated. Results showed good internal consistency and test-retest reliability and a clear factor structure. Most expected relationships with other constructs were significant. Findings suggest that mindfulness skills are differentially related to aspects of personality and mental health, including neuroticism, psychological symptoms, emotional intelligence, alexithymia, experiential avoidance, dissociation, and absorption.

Patterns of functional vision loss in glaucoma determined with archetypal analysis

PubMed Central

Elze, Tobias; Pasquale, Louis R.; Shen, Lucy Q.; Chen, Teresa C.; Wiggs, Janey L.; Bex, Peter J.

2015-01-01

Glaucoma is an optic neuropathy accompanied by vision loss which can be mapped by visual field (VF) testing revealing characteristic patterns related to the retinal nerve fibre layer anatomy. While detailed knowledge about these patterns is important to understand the anatomic and genetic aspects of glaucoma, current classification schemes are typically predominantly derived qualitatively. Here, we classify glaucomatous vision loss quantitatively by statistically learning prototypical patterns on the convex hull of the data space. In contrast to component-based approaches, this method emphasizes distinct aspects of the data and provides patterns that are easier to interpret for clinicians. Based on 13 231 reliable Humphrey VFs from a large clinical glaucoma practice, we identify an optimal solution with 17 glaucomatous vision loss prototypes which fit well with previously described qualitative patterns from a large clinical study. We illustrate relations of our patterns to retinal structure by a previously developed mathematical model. In contrast to the qualitative clinical approaches, our results can serve as a framework to quantify the various subtypes of glaucomatous visual field loss. PMID:25505132

[Psychometric Testing of a New Scale Assessing the Reasons for Non-Utilisation of Health Care Services by People with Migration Backgrounds].

PubMed

Maier, I; Kriston, L; Härter, M; Hölzel, L P; Bermejo, I

2015-10-01

In Germany live a lot of migrants. Cultural and migration specific aspects seem to have an effect on utilisation of health care. There are no instruments that measure such factors of influence. A systematic literature research or article that identify the difficulties of the migrants in using the health care system, was made. The relevant aspects were explored during a health related opinion survey of migrants from former USSR, Turkey, Italy and Spain. The psychometric qualities of this questionnaire were investigated with factor and reliability analyses. There were 24 reasons identified for non-utilisation health care. They were combined in a questionnaire. The factor analysis showed 2-factor structure ("janguage und information related Reasons" Chronbach's α=0.928 and "experience with/attitude toward health care system", Chronbach's α=0.879). Furthermore, there was a total scale with Chronbach's α=0.945. The acceptance was between 80.0 and 96.3%. The results confirm the psychometric quality of this measuring instrument. For further generalisability more verification will be necessary. © Georg Thieme Verlag KG Stuttgart · New York.

Technology Overview for Advanced Aircraft Armament System Program.

DTIC Science & Technology

1981-05-01

availability of methods or systems for improving stores and armament safety. Of particular importance are aspects of safety involving hazards analysis ...flutter virtually insensitive to inertia and center-of- gravity location of store - Simplifies and reduces analysis and testing required to flutter- clear...status. Nearly every existing reliability analysis and discipline that prom- ised a positive return on reliability performance was drawn out, dusted

Reliability and Validity of Age Band 1 of the Movement Assessment Battery for Children--Second Edition

ERIC Educational Resources Information Center

Ellinoudis, Theodoros; Evaggelinou, Christina; Kourtessis, Thomas; Konstantinidou, Zoe; Venetsanou, Fotini; Kambas, Antonis

2011-01-01

The purpose of this study was to examine specific aspects of the reliability and validity of age band 1 of the Movement Assessment Battery for Children-Second Edition (MABC-2) (Henderson, Sugden, & Barnett, 2007) in Greek preschool children. One hundred and eighty-three children participated in the study; the children ranged in age from 36 to…

Pediatric Quality of Life Enjoyment and Satisfaction Questionnaire (PQ-LES-Q): Reliability and Validity

ERIC Educational Resources Information Center

Endicott, Jean; Nee, John; Yang, Ruoyong; Wohlberg, Christopher

2006-01-01

Objective: The pediatric version of the Short Form of the Quality of Life Enjoyment and Satisfaction Questionnaire (PQ-LES-Q) was developed to aid in the assessment of an important aspect of life experience in children and adolescents. Method: The reliability and validity of the PQ-LES-Q was tested using data from a sample of 376 outpatient…

Design, measures and sample characteristics of the CadeViMa-Spain survey on quality of life in community-dwelling older adults.

PubMed

Fernandez-Mayoralas, Gloria; Giraldez-Garcia, Carolina; Forjaz, Maria João; Rojo-Perez, Fermina; Martinez-Martin, Pablo; Prieto-Flores, Maria-Eugenia

2012-03-01

The survey "Quality of life in older adults-Spain" (CadeViMa-Spain) was designed to obtain information about objective and subjective determinants of Quality of Life (QoL) in old age, from a multidimensional perspective. This paper presents the overall description, methodology, sample characteristics and reliability of the measures used. A cross-sectional survey was carried out in a representative sample of 1106 community-dwelling adults aged 60 years and over in Spain. The sample was obtained by a geodemographically-based proportional multistage stratified sampling. A home-based questionnaire included validated scales and questions about sociodemographic characteristics, global QoL, health, family and social networks, financial means and retirement, leisure and social participation, residential environment, and satisfaction with those issues. Face-to-face semi-structured interviews were conducted. Cronbach's α coefficients were used to assess internal consistency of the scales. This nationally representative survey furnishes information about global QoL, health-related QoL, resources availability, living conditions, and satisfaction with the assessed aspects, including life domains most valued by this group. In general, community-dwelling older adults reported positive assessments of health, living conditions, and high levels of satisfaction with the different aspects of QoL. The reliability of the measures in this population was good. This survey provides comprehensive and useful information, based on the view of older people themselves, with potential to contribute to health and social policies towards promoting active aging. The database is available for in-depth comparisons.

Practical aspects in surface biopotential electrode placement for smart clothing: A simulation study

NASA Astrophysics Data System (ADS)

Mulyadi, Indra H.; Haueisen, Jens; Supriyanto, Eko

2017-02-01

In addition to physiological aspects, placement of surface biopotential electrodes for smart clothing should consider practical aspects due to their dynamic application environment. This study is aimed at finding the best places to put the electrode on areas where the measurement is practically reliable. Calculation was performed by using three practical aspects: 1) skin-shirt gap; 2) shirt movement, and 4) regional sweat rate. We employed 3DS Max software to simulate shirt behavior. The simulation result showed that generally practical satisfaction degrees are higher in the posterior. The quantitative approach may help smart clothing designers to choose the locations to place electrodes.

Software reliability experiments data analysis and investigation

NASA Technical Reports Server (NTRS)

Walker, J. Leslie; Caglayan, Alper K.

1991-01-01

The objectives are to investigate the fundamental reasons which cause independently developed software programs to fail dependently, and to examine fault tolerant software structures which maximize reliability gain in the presence of such dependent failure behavior. The authors used 20 redundant programs from a software reliability experiment to analyze the software errors causing coincident failures, to compare the reliability of N-version and recovery block structures composed of these programs, and to examine the impact of diversity on software reliability using subpopulations of these programs. The results indicate that both conceptually related and unrelated errors can cause coincident failures and that recovery block structures offer more reliability gain than N-version structures if acceptance checks that fail independently from the software components are available. The authors present a theory of general program checkers that have potential application for acceptance tests.

Reliability analysis of composite structures

NASA Technical Reports Server (NTRS)

Kan, Han-Pin

1992-01-01

A probabilistic static stress analysis methodology has been developed to estimate the reliability of a composite structure. Closed form stress analysis methods are the primary analytical tools used in this methodology. These structural mechanics methods are used to identify independent variables whose variations significantly affect the performance of the structure. Once these variables are identified, scatter in their values is evaluated and statistically characterized. The scatter in applied loads and the structural parameters are then fitted to appropriate probabilistic distribution functions. Numerical integration techniques are applied to compute the structural reliability. The predicted reliability accounts for scatter due to variability in material strength, applied load, fabrication and assembly processes. The influence of structural geometry and mode of failure are also considerations in the evaluation. Example problems are given to illustrate various levels of analytical complexity.

Wafer level reliability for high-performance VLSI design

NASA Technical Reports Server (NTRS)

Root, Bryan J.; Seefeldt, James D.

1987-01-01

As very large scale integration architecture requires higher package density, reliability of these devices has approached a critical level. Previous processing techniques allowed a large window for varying reliability. However, as scaling and higher current densities push reliability to its limit, tighter control and instant feedback becomes critical. Several test structures developed to monitor reliability at the wafer level are described. For example, a test structure was developed to monitor metal integrity in seconds as opposed to weeks or months for conventional testing. Another structure monitors mobile ion contamination at critical steps in the process. Thus the reliability jeopardy can be assessed during fabrication preventing defective devices from ever being placed in the field. Most importantly, the reliability can be assessed on each wafer as opposed to an occasional sample.

Perceived Parental Attitudes of Gender Expansiveness: Development and Preliminary Factor Structure of a Self-Report Youth Questionnaire

PubMed Central

Hidalgo, Marco A.; Chen, Diane; Garofalo, Robert; Forbes, Catherine

2017-01-01

Abstract Purpose: Parental acceptance of gender identity/expression in lesbian, gay, bisexual, transgender, and queer/questioning (LGBTQ+) youth moderates the effects of minority stress on mental health outcomes. Given this association, mental health clinicians of gender-expansive adolescents often assess the degree to which these youth perceive their parents/primary caregivers as accepting or nonaffirming of their gender identity and expression. While existing measures may reliably assess youth's perceptions of general family support, no known tool aids in the assessment an adolescent's perceived parental support related to adolescent gender-expansive experiences. Methods: To provide both clinicians and researchers with an empirically derived tool, the current study used factor analysis to explore an underlying factor structure of a brief questionnaire developed by subject-matter experts and pertaining to multiple aspects of perceived parental support in gender-expansive adolescents and young adults. Respondents were gender-expansive adolescents and young adults seeking care in an interdisciplinary gender-health clinic within a pediatric academic medical center in the Midwestern United States. Results: Exploratory factor analysis resulted in a 14-item questionnaire comprised of two subscales assessing perceived parental nonaffirmation and perceived parental acceptance. Internal consistency and construct validity results provided support for this new questionnaire. Conclusion: This study provides preliminary evidence of the factor structure, reliability and validity of the Parental Attitudes of Gender Expansiveness Scale for Youth (PAGES-Y). These findings demonstrate both the clinical and research utility of the PAGES-Y, a tool that can yield a more nuanced understanding of family-related risk and protective factors in gender-expansive adolescents. PMID:29159312

Perceived Parental Attitudes of Gender Expansiveness: Development and Preliminary Factor Structure of a Self-Report Youth Questionnaire.

PubMed

Hidalgo, Marco A; Chen, Diane; Garofalo, Robert; Forbes, Catherine

2017-01-01

Purpose: Parental acceptance of gender identity/expression in lesbian, gay, bisexual, transgender, and queer/questioning (LGBTQ+) youth moderates the effects of minority stress on mental health outcomes. Given this association, mental health clinicians of gender-expansive adolescents often assess the degree to which these youth perceive their parents/primary caregivers as accepting or nonaffirming of their gender identity and expression. While existing measures may reliably assess youth's perceptions of general family support, no known tool aids in the assessment an adolescent's perceived parental support related to adolescent gender-expansive experiences. Methods: To provide both clinicians and researchers with an empirically derived tool, the current study used factor analysis to explore an underlying factor structure of a brief questionnaire developed by subject-matter experts and pertaining to multiple aspects of perceived parental support in gender-expansive adolescents and young adults. Respondents were gender-expansive adolescents and young adults seeking care in an interdisciplinary gender-health clinic within a pediatric academic medical center in the Midwestern United States. Results: Exploratory factor analysis resulted in a 14-item questionnaire comprised of two subscales assessing perceived parental nonaffirmation and perceived parental acceptance. Internal consistency and construct validity results provided support for this new questionnaire. Conclusion: This study provides preliminary evidence of the factor structure, reliability and validity of the Parental Attitudes of Gender Expansiveness Scale for Youth (PAGES-Y). These findings demonstrate both the clinical and research utility of the PAGES-Y, a tool that can yield a more nuanced understanding of family-related risk and protective factors in gender-expansive adolescents.

Statistical properties of Chinese phonemic networks

NASA Astrophysics Data System (ADS)

Yu, Shuiyuan; Liu, Haitao; Xu, Chunshan

2011-04-01

The study of properties of speech sound systems is of great significance in understanding the human cognitive mechanism and the working principles of speech sound systems. Some properties of speech sound systems, such as the listener-oriented feature and the talker-oriented feature, have been unveiled with the statistical study of phonemes in human languages and the research of the interrelations between human articulatory gestures and the corresponding acoustic parameters. With all the phonemes of speech sound systems treated as a coherent whole, our research, which focuses on the dynamic properties of speech sound systems in operation, investigates some statistical parameters of Chinese phoneme networks based on real text and dictionaries. The findings are as follows: phonemic networks have high connectivity degrees and short average distances; the degrees obey normal distribution and the weighted degrees obey power law distribution; vowels enjoy higher priority than consonants in the actual operation of speech sound systems; the phonemic networks have high robustness against targeted attacks and random errors. In addition, for investigating the structural properties of a speech sound system, a statistical study of dictionaries is conducted, which shows the higher frequency of shorter words and syllables and the tendency that the longer a word is, the shorter the syllables composing it are. From these structural properties and dynamic properties one can derive the following conclusion: the static structure of a speech sound system tends to promote communication efficiency and save articulation effort while the dynamic operation of this system gives preference to reliable transmission and easy recognition. In short, a speech sound system is an effective, efficient and reliable communication system optimized in many aspects.

Potential of zebrafish as a model for exploring the role of the amygdala in emotional memory and motivational behavior.

PubMed

Perathoner, Simon; Cordero-Maldonado, Maria Lorena; Crawford, Alexander D

2016-06-01

Emotion is a key aspect of behavior, enabling humans and animals to assign either positive or negative values to sensory inputs and thereby to make appropriate decisions. Classical experiments in mammalian models, mainly in primates and rodents, have shown that the amygdala is essential for appetitive and aversive associative processing and that dysfunction of this brain region leads to various psychiatric conditions, including depression, generalized anxiety disorder, panic disorder, phobias, autism, and posttraumatic stress disorder. In the past 2 decades, the zebrafish (Danio rerio; Cyprinidae) has emerged as a versatile, reliable vertebrate model organism for the in vivo study of development, gene function, and numerous aspects of human pathologies. Small size, high fecundity, rapid external development, transparency, genetic tractability, and high genetic and physiologic homology with humans are among the factors that have contributed to the success with this small fish in different biomedical research areas. Recent findings indicate that, despite the anatomical differences in the brain structure of teleosts and tetrapods, fish possess a structure homologous to the mammalian amygdala, a hypothesis that is supported by the expression of molecular markers, analyses of neuronal projections in different brain areas, and behavioral studies. This Review summarizes this evidence and highlights a number of relevant bioassays in zebrafish to study emotional memory and motivational behavior. © 2016 Wiley Periodicals, Inc.

Al-Si-Cu/TiN multilayer interconnection and Al-Ge reflow sputtering technologies for quarter-micron devices

NASA Astrophysics Data System (ADS)

Kikkawa, Takamaro; Kikuta, Kuniko

1993-05-01

Issues of interconnection technologies for quarter-micron devices are the reliability of metal lines with quarter-micron feature sizes and the formation of contact-hole-plugs with high aspect ratios. This paper describes a TiN/Al-Si-Cu/TiN/Al-Si-Cu/TiN/Ti multilayer conductor structure as a quarter-micron interconnection technology and aluminum-germanium (Al-Ge) reflow sputtering as a contact-hole filling technology. The TiN/Al-Si-Cu/TiN/Al-Si-Cu/TiN/Ti multilayer conductor structure could suppress stress-induced voiding and improve the electromigration mean-time to failure. These improvements are attributed to the fact that the grain boundaries for the Al-Si-Cu film and the interfaces between the Al-Si-Cu and the TiN films are strengthened by the rigid intermetallic compound, TiAl3. The Al-Ge alloy reflow sputtering is a candidate for contact- and via-hole filling technologies in terms of reducing fabrication costs. The Al-Ge reflow sputtering achieved low temperature contact hole filling at 300 degree(s)C. Contact holes with a diameter of 0.25 micrometers and aspect ratio of 4 could be filled. This is attributed to the low eutectic temperature for Al-Ge (424 degree(s)C) and the effect of thin polysilicon underlayer on the enhancement of Al-Ge reflow.

Leisure activities among older Germans - a qualitative study.

PubMed

Boggatz, Thomas

2013-05-01

Leisure activities contribute to well-being and health in old age. Community nurses should consequently promote such activities among older persons. To do so they need an understanding of older persons' interest in leisure activities. Social contacts, volunteering and pursuit of hobbies and interests constitute the main aspects of leisure. This study aimed to determine the attitudes of older Germans to these aspects to identify user types of leisure time facilities. A qualitative study was conducted within a community-based project in an industrial town in West Germany. Data were collected with semi-structured guideline interviews and evaluated with qualitative content analysis according to Mayring. With regard to social contacts attitudes ranged from limited need for contacts to being a reliable member in an older persons' club. Social engagement is only found among the latter. Pursuit of hobbies and interest ranged from being a minimal user of leisure time facilities to refined expectations. Inflexible group structures may prevent potential users from participation despite having a programme in accordance with target group needs. Attitudes to leisure activities can be described as a combination of two dimensions: the degree of social involvement and the desired refinement of hobbies and interest. Community nurses who organise social afternoons need to assess these attitudes and should steer social dynamics of in a way that facilitates access for newcomers. © 2012 Blackwell Publishing Ltd.

Electronics reliability and measurement technology

NASA Technical Reports Server (NTRS)

Heyman, Joseph S. (Editor)

1987-01-01

A summary is presented of the Electronics Reliability and Measurement Technology Workshop. The meeting examined the U.S. electronics industry with particular focus on reliability and state-of-the-art technology. A general consensus of the approximately 75 attendees was that "the U.S. electronics industries are facing a crisis that may threaten their existence". The workshop had specific objectives to discuss mechanisms to improve areas such as reliability, yield, and performance while reducing failure rates, delivery times, and cost. The findings of the workshop addressed various aspects of the industry from wafers to parts to assemblies. Key problem areas that were singled out for attention are identified, and action items necessary to accomplish their resolution are recommended.

An Energy-Based Limit State Function for Estimation of Structural Reliability in Shock Environments

DOE PAGES

Guthrie, Michael A.

2013-01-01

limit state function is developed for the estimation of structural reliability in shock environments. This limit state function uses peak modal strain energies to characterize environmental severity and modal strain energies at failure to characterize the structural capacity. The Hasofer-Lind reliability index is briefly reviewed and its computation for the energy-based limit state function is discussed. Applications to two degree of freedom mass-spring systems and to a simple finite element model are considered. For these examples, computation of the reliability index requires little effort beyond a modal analysis, but still accounts for relevant uncertainties in both the structure and environment.more » For both examples, the reliability index is observed to agree well with the results of Monte Carlo analysis. In situations where fast, qualitative comparison of several candidate designs is required, the reliability index based on the proposed limit state function provides an attractive metric which can be used to compare and control reliability.« less

Family Environment and Childhood Obesity: A New Framework with Structural Equation Modeling

PubMed Central

Huang, Hui; Wan Mohamed Radzi, Che Wan Jasimah bt; Salarzadeh Jenatabadi, Hashem

2017-01-01

The main purpose of the current article is to introduce a framework of the complexity of childhood obesity based on the family environment. A conceptual model that quantifies the relationships and interactions among parental socioeconomic status, family food security level, child’s food intake and certain aspects of parental feeding behaviour is presented using the structural equation modeling (SEM) concept. Structural models are analysed in terms of the direct and indirect connections among latent and measurement variables that lead to the child weight indicator. To illustrate the accuracy, fit, reliability and validity of the introduced framework, real data collected from 630 families from Urumqi (Xinjiang, China) were considered. The framework includes two categories of data comprising the normal body mass index (BMI) range and obesity data. The comparison analysis between two models provides some evidence that in obesity modeling, obesity data must be extracted from the dataset and analysis must be done separately from the normal BMI range. This study may be helpful for researchers interested in childhood obesity modeling based on family environment. PMID:28208833

Family Environment and Childhood Obesity: A New Framework with Structural Equation Modeling.

PubMed

Huang, Hui; Wan Mohamed Radzi, Che Wan Jasimah Bt; Salarzadeh Jenatabadi, Hashem

2017-02-13

The main purpose of the current article is to introduce a framework of the complexity of childhood obesity based on the family environment. A conceptual model that quantifies the relationships and interactions among parental socioeconomic status, family food security level, child's food intake and certain aspects of parental feeding behaviour is presented using the structural equation modeling (SEM) concept. Structural models are analysed in terms of the direct and indirect connections among latent and measurement variables that lead to the child weight indicator. To illustrate the accuracy, fit, reliability and validity of the introduced framework, real data collected from 630 families from Urumqi (Xinjiang, China) were considered. The framework includes two categories of data comprising the normal body mass index (BMI) range and obesity data. The comparison analysis between two models provides some evidence that in obesity modeling, obesity data must be extracted from the dataset and analysis must be done separately from the normal BMI range. This study may be helpful for researchers interested in childhood obesity modeling based on family environment.

Clark's nutcracker spatial memory: the importance of large, structural cues.

PubMed

Bednekoff, Peter A; Balda, Russell P

2014-02-01

Clark's nutcrackers, Nucifraga columbiana, cache and recover stored seeds in high alpine areas including areas where snowfall, wind, and rockslides may frequently obscure or alter cues near the cache site. Previous work in the laboratory has established that Clark's nutcrackers use spatial memory to relocate cached food. Following from aspects of this work, we performed experiments to test the importance of large, structural cues for Clark's nutcracker spatial memory. Birds were no more accurate in recovering caches when more objects were on the floor of a large experimental room nor when this room was subdivided with a set of panels. However, nutcrackers were consistently less accurate in this large room than in a small experimental room. Clark's nutcrackers probably use structural features of experimental rooms as important landmarks during recovery of cached food. This use of large, extremely stable cues may reflect the imperfect reliability of smaller, closer cues in the natural habitat of Clark's nutcrackers. This article is part of a Special Issue entitled: CO3 2013. Copyright © 2013 Elsevier B.V. All rights reserved.

Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS

NASA Astrophysics Data System (ADS)

Zou, Yi-Qing; Wang, Na; Kang, Ling; Qu, Hua-Min; He, Zhe-Xi; Yu, Jie-Bing

2013-05-01

The rapid cycling synchrotron (RCS) of the China Spallation Neutron Source (CSNS) is a high intensity proton ring with beam power of 100 kW. In order to control the residual activation to meet the requirements of hands-on maintenance, a two-stage collimation system has been designed for the RCS. The collimation system consists of one primary collimator made of thin metal to scatter the beam and four secondary collimators as absorbers. Thermal analysis is an important aspect in evaluating the reliability of the collimation system. The calculation of the temperature distribution and thermal stress of the primary collimator with different materials is carried out by using ANSYS code. In order to control the temperature rise and thermal stress of the primary collimator to a reasonable level, an air cooling structure is intended to be used. The mechanical design of the cooling structure is presented, and the cooling efficiency with different chin numbers and wind velocity is also analyzed. Finally, the fatigue lifetime of the collimator under thermal shocks is estimated.

A Psychometric Evaluation of the Threadgold Communication Tool for Persons with Dementia

PubMed Central

Strøm, Benedicte Sørensen; Engedal, Knut; Grov, Ellen-Karine

2016-01-01

Background The objective of this study was to investigate the psychometric properties of the Threadgold Communication Tool (TCT). Method Internal consistency reliability was measured using Cronbach's α coefficient and inter-item correlation. Test-retest was performed to examine the instrument's stability. Exploratory principal component analysis (PCA) with oblimin rotation was carried out to evaluate construct validity. Finally, the score on each item of the TCT was correlated with the person's Mini Mental State Examination (MMSE) and Barthel Index of activities of daily living scores. Results A total of 51 persons participated, with a mean age of 86.7 (SD 6.6) years, of whom 46 were women with moderate-to-severe dementia [mean MMSE score 7.5 (SD 6.7)]. There were two measurement points 2 weeks apart. The results showed a satisfactory level for internal consistency and a high test-retest reliability (r = 0.76). The corrected item-total correlation ranged between 0.50 and 0.87, and a two-factor structure was revealed at the PCA. ‘Vocalizing’ seemed to measure another aspect of communication and was the only item which was negatively loaded. Conclusion Despite the low sample size in this study, the results revealed the TCT as a reliable and valid instrument, suitable for measuring communication among people with dementia. We suggest clarifying the understanding of ‘vocalizing’ before considering removing it from the scale. PMID:27239188

Addressing Unison and Uniqueness of Reliability and Safety for Better Integration

NASA Technical Reports Server (NTRS)

Huang, Zhaofeng; Safie, Fayssal

2015-01-01

For a long time, both in theory and in practice, safety and reliability have not been clearly differentiated, which leads to confusion, inefficiency, and sometime counter-productive practices in executing each of these two disciplines. It is imperative to address the uniqueness and the unison of these two disciplines to help both disciplines become more effective and to promote a better integration of the two for enhancing safety and reliability in our products as an overall objective. There are two purposes of this paper. First, it will investigate the uniqueness and unison of each discipline and discuss the interrelationship between the two for awareness and clarification. Second, after clearly understanding the unique roles and interrelationship between the two in a product design and development life cycle, we offer suggestions to enhance the disciplines with distinguished and focused roles, to better integrate the two, and to improve unique sets of skills and tools of reliability and safety processes. From the uniqueness aspect, the paper identifies and discusses the respective uniqueness of reliability and safety from their roles, accountability, nature of requirements, technical scopes, detailed technical approaches, and analysis boundaries. It is misleading to equate unreliable to unsafe, since a safety hazard may or may not be related to the component, sub-system, or system functions, which are primarily what reliability addresses. Similarly, failing-to-function may or may not lead to hazard events. Examples will be given in the paper from aerospace, defense, and consumer products to illustrate the uniqueness and differences between reliability and safety. From the unison aspect, the paper discusses what the commonalities between reliability and safety are, and how these two disciplines are linked, integrated, and supplemented with each other to accomplish the customer requirements and product goals. In addition to understanding the uniqueness in reliability and safety, a better understanding of unison and commonalities will further help in understanding the interaction between reliability and safety. This paper discusses the unison and uniqueness of reliability and safety. It presents some suggestions for better integration of the two disciplines in terms of technical approaches, tools, techniques, and skills to enhance the role of reliability and safety in supporting a product design and development life cycle. The paper also discusses eliminating the redundant effort and minimizing the overlap of reliability and safety analyses for an efficient implementation of the two disciplines.

Bulk electric system reliability evaluation incorporating wind power and demand side management

NASA Astrophysics Data System (ADS)

Huang, Dange

Electric power systems are experiencing dramatic changes with respect to structure, operation and regulation and are facing increasing pressure due to environmental and societal constraints. Bulk electric system reliability is an important consideration in power system planning, design and operation particularly in the new competitive environment. A wide range of methods have been developed to perform bulk electric system reliability evaluation. Theoretically, sequential Monte Carlo simulation can include all aspects and contingencies in a power system and can be used to produce an informative set of reliability indices. It has become a practical and viable tool for large system reliability assessment technique due to the development of computing power and is used in the studies described in this thesis. The well-being approach used in this research provides the opportunity to integrate an accepted deterministic criterion into a probabilistic framework. This research work includes the investigation of important factors that impact bulk electric system adequacy evaluation and security constrained adequacy assessment using the well-being analysis framework. Load forecast uncertainty is an important consideration in an electrical power system. This research includes load forecast uncertainty considerations in bulk electric system reliability assessment and the effects on system, load point and well-being indices and reliability index probability distributions are examined. There has been increasing worldwide interest in the utilization of wind power as a renewable energy source over the last two decades due to enhanced public awareness of the environment. Increasing penetration of wind power has significant impacts on power system reliability, and security analyses become more uncertain due to the unpredictable nature of wind power. The effects of wind power additions in generating and bulk electric system reliability assessment considering site wind speed correlations and the interactive effects of wind power and load forecast uncertainty on system reliability are examined. The concept of the security cost associated with operating in the marginal state in the well-being framework is incorporated in the economic analyses associated with system expansion planning including wind power and load forecast uncertainty. Overall reliability cost/worth analyses including security cost concepts are applied to select an optimal wind power injection strategy in a bulk electric system. The effects of the various demand side management measures on system reliability are illustrated using the system, load point, and well-being indices, and the reliability index probability distributions. The reliability effects of demand side management procedures in a bulk electric system including wind power and load forecast uncertainty considerations are also investigated. The system reliability effects due to specific demand side management programs are quantified and examined in terms of their reliability benefits.

Comparative Analysis of the Reliability of Steel Structure with Pinned and Rigid Nodes Subjected to Fire

NASA Astrophysics Data System (ADS)

Kubicka, Katarzyna; Radoń, Urszula; Szaniec, Waldemar; Pawlak, Urszula

2017-10-01

The paper concerns the reliability analysis of steel structures subjected to high temperatures of fire gases. Two types of spatial structures were analysed, namely with pinned and rigid nodes. The fire analysis was carried out according to prescriptions of Eurocode. The static-strength analysis was conducted using the finite element method (FEM). The MES3D program, developed by Szaniec (Kielce University of Technology, Poland), was used for this purpose. The results received from MES3D made it possible to carry out the reliability analysis using the Numpress Explore program that was developed at the Institute of Fundamental Technological Research of the Polish Academy of Sciences [9]. The measurement of reliability of structures is the Hasofer-Lind reliability index (β). The reliability analysis was carried out according to approximation (FORM, SORM) and simulation (Importance Sampling, Monte Carlo) methods. As the fire progresses, the value of reliability index decreases. The analysis conducted for the study made it possible to evaluate the impact of node types on those changes. In real structures, it is often difficult to define correctly types of nodes, so some simplifications are made. The presented analysis contributes to the recognition of consequences of such assumptions for the safety of structures, subjected to fire.

Structure-based Markov random field model for representing evolutionary constraints on functional sites.

PubMed

Jeong, Chan-Seok; Kim, Dongsup

2016-02-24

Elucidating the cooperative mechanism of interconnected residues is an important component toward understanding the biological function of a protein. Coevolution analysis has been developed to model the coevolutionary information reflecting structural and functional constraints. Recently, several methods have been developed based on a probabilistic graphical model called the Markov random field (MRF), which have led to significant improvements for coevolution analysis; however, thus far, the performance of these models has mainly been assessed by focusing on the aspect of protein structure. In this study, we built an MRF model whose graphical topology is determined by the residue proximity in the protein structure, and derived a novel positional coevolution estimate utilizing the node weight of the MRF model. This structure-based MRF method was evaluated for three data sets, each of which annotates catalytic site, allosteric site, and comprehensively determined functional site information. We demonstrate that the structure-based MRF architecture can encode the evolutionary information associated with biological function. Furthermore, we show that the node weight can more accurately represent positional coevolution information compared to the edge weight. Lastly, we demonstrate that the structure-based MRF model can be reliably built with only a few aligned sequences in linear time. The results show that adoption of a structure-based architecture could be an acceptable approximation for coevolution modeling with efficient computation complexity.

Capacitor Technologies, Applications and Reliability

NASA Technical Reports Server (NTRS)

1981-01-01

Various aspects of capacitor technologies and applications are discussed. Major emphasis is placed on: the causes of failures; accelerated testing; screening tests; destructive physical analysis; applications techniques; and improvements in capacitor capabilities.

A Low-Cost Precision Colorimeter.

ERIC Educational Resources Information Center

Jaffar, M.; Zahid, Qazi

1988-01-01

Presents the construction aspects of a simple but reliable colorimeter made from locally available components. Notes the absorption range to be 400-750-nm. Lists seven experiments done on the instrument. (MVL)

Development of a probabilistic analysis methodology for structural reliability estimation

NASA Technical Reports Server (NTRS)

Torng, T. Y.; Wu, Y.-T.

1991-01-01

The novel probabilistic analysis method for assessment of structural reliability presented, which combines fast-convolution with an efficient structural reliability analysis, can after identifying the most important point of a limit state proceed to establish a quadratic-performance function. It then transforms the quadratic function into a linear one, and applies fast convolution. The method is applicable to problems requiring computer-intensive structural analysis. Five illustrative examples of the method's application are given.

Application of Advanced Fracture Mechanics Technology to Ensure Structural Reliability in Critical Titanium Structures,

DTIC Science & Technology

1982-11-22

RD-Ri42 354 APPLICATION OF ADVANCED FRACTURE MECHANICS TECHNOLOGY i/i TT ENSURE STRUCTURA..(U) 1WESTINGHOUSE RESEARCH FND DEVELOPMENT CENTER...I Iml .4. 47 Igo 12. 4 %B 1. __ ~. ~% ski Z L __ 12 APPLICATION OF ADVANCED FRACTURE MECHANICS -p TECHNOLOGY TO ENSURE STRUCTURAL RELIABILITY IN...Road W Pilttsburgh. Pennsylvania 15235 84 06 18 207 APPLICATION OF ADVANCED FRACTURE MECHANICS TECHNOLOGY TO ENSURE STRUCTURAL RELIABILITY IN CRITICAL

Metrological Reliability of Medical Devices

NASA Astrophysics Data System (ADS)

Costa Monteiro, E.; Leon, L. F.

2015-02-01

The prominent development of health technologies of the 20th century triggered demands for metrological reliability of physiological measurements comprising physical, chemical and biological quantities, essential to ensure accurate and comparable results of clinical measurements. In the present work, aspects concerning metrological reliability in premarket and postmarket assessments of medical devices are discussed, pointing out challenges to be overcome. In addition, considering the social relevance of the biomeasurements results, Biometrological Principles to be pursued by research and innovation aimed at biomedical applications are proposed, along with the analysis of their contributions to guarantee the innovative health technologies compliance with the main ethical pillars of Bioethics.

Scaled CMOS Reliability and Considerations for Spacecraft Systems : Bottom-Up and Top-Down Perspectives

NASA Technical Reports Server (NTRS)

White, Mark

2012-01-01

The recently launched Mars Science Laboratory (MSL) flagship mission, named Curiosity, is the most complex rover ever built by NASA and is scheduled to touch down on the red planet in August, 2012 in Gale Crater. The rover and its instruments will have to endure the harsh environments of the surface of Mars to fulfill its main science objectives. Such complex systems require reliable microelectronic components coupled with adequate component and system-level design margins. Reliability aspects of these elements of the spacecraft system are presented from bottom- up and top-down perspectives.

Storage management in Ada. Three reports. Volume 1: Storage management in Ada as a risk to the development of reliable software. Volume 2: Relevant aspects of language. Volume 3: Requirements of the language versus manifestations of current implementations

NASA Technical Reports Server (NTRS)

Auty, David

1988-01-01

The risk to the development of program reliability is derived from the use of a new language and from the potential use of new storage management techniques. With Ada and associated support software, there is a lack of established guidelines and procedures, drawn from experience and common usage, which assume reliable behavior. The risk is identified and clarified. In order to provide a framework for future consideration of dynamic storage management on Ada, a description of the relevant aspects of the language is presented in two sections: Program data sources, and declaration and allocation in Ada. Storage-management characteristics of the Ada language and storage-management characteristics of Ada implementations are differentiated. Terms that are used are defined in a narrow and precise sense. The storage-management implications of the Ada language are described. The storage-management options available to the Ada implementor and the implications of the implementor's choice for the Ada programmer are also described.

Reliability and validity of the Positive Mental Health Questionnaire in a sample of Spanish university students.

PubMed

Roldán-Merino, J; Lluch-Canut, M T; Casas, I; Sanromà-Ortíz, M; Ferré-Grau, C; Sequeira, C; Falcó-Pegueroles, A; Soares, D; Puig-Llobet, M

2017-03-01

WHAT IS KNOWN ON THE SUBJECT?: In general, the current studies of positive mental health use questionnaires or parts thereof. However, while these questionnaires evaluate aspects of positive mental health, they fail to measure the construct itself. WHAT DOES THIS PAPER ADD TO EXISTING KNOWLEDGE?: The widespread use and the lack of specific questionnaires for evaluating the positive mental health construct justify the need to measure the robustness of the Positive Mental Health Questionnaire. Also six factors are proposed to measure positive mental health. WHAT ARE THE IMPLICATIONS FOR PRACTICE?: The availability of a good questionnaire to measure positive mental health in university students is useful not only to promote mental health but also to strengthen the curricula of future professionals. Introduction Nursing has a relevant role in managing mental health. It is important to identify and thereafter to enhance positive aspects of mental health among university nursing students. Aim The aim of the present study was to analyse the psychometric properties of the Positive Mental Health Questionnaire (PMHQ) in terms of reliability and validity using confirmatory factor analysis in a sample of university students. Method A cross-sectional study was carried out in a sample of 1091 students at 4 nursing schools in Catalonia, Spain. The reliability of the PMHQ was measured by means of Cronbach's alpha coefficient, and the test-retest stability was measured with the intraclass correlation coefficient (ICC). Confirmatory factor analysis was used to determine the validity of the factorial structure. Results Cronbach's alpha coefficient was satisfactory (>0.70) for four of the six subscales or dimensions and ranged from 0.54 to 0.79. ICC analysis was satisfactory for the six subscales or dimensions. The hypothesis was confirmed in the analysis of the correlations between subclasses and the overall scale, with the strongest correlations being found between the majority of the subscales and the overall scale. Confirmatory factor analysis showed that the model proposed for the factors fit the data satisfactorily. Discussion This scale is a valid and reliable instrument for evaluating positive mental health in university students. Implications for Practice A good questionnaire to measure positive mental health in university students is useful not only to promote mental health but also to strengthen the curricula of future professionals. © 2017 John Wiley & Sons Ltd.

Validation of Spanish Language Evaluation Instruments for Body Dysmorphic Disorder and the Dysmorphic Concern Construct

PubMed Central

Senín-Calderón, Cristina; Valdés-Díaz, María; Benítez-Hernández, Ma M.; Núñez-Gaitán, Ma C.; Perona-Garcelán, Salvador; Martínez-Cervantes, Rafael; Rodríguez-Testal, Juan F.

2017-01-01

Dysmorphic concern (DC) refers to excessive preoccupation with a slight or imagined defect in physical appearance with social avoidance and behavior directed at controlling the defect in appearance. This study attempted to adapt the factor structure of two instruments that cover the DC construct, the Dysmorphic Concern Questionnaire (DCQ) and the Body Dysmorphic Disorder Examination Self-Report (BDDE-SR), to Spanish and establish their psychometric properties. A total of 920 subjects (62.7% women, Mage = 32.44 years) participated. Exploratory and Confirmatory Factor Analysis of both scales found adequate goodness of fit indices. A one-dimensional structure was found for the DCQ and two first-order factors (dissatisfaction/preoccupation with body image (BI) and BI avoidance behavior) were identified for the BDDE-SR. The psychometric test–retest reliability and validity properties (content, convergent, and discriminant) were satisfactory. It is suggested that the DC construct includes both cognitive and behavioral aspects and may represent a continuum of severity with Body Dysmorphic Disorder at the end. PMID:28713311

Validation of Spanish Language Evaluation Instruments for Body Dysmorphic Disorder and the Dysmorphic Concern Construct.

PubMed

Senín-Calderón, Cristina; Valdés-Díaz, María; Benítez-Hernández, Ma M; Núñez-Gaitán, Ma C; Perona-Garcelán, Salvador; Martínez-Cervantes, Rafael; Rodríguez-Testal, Juan F

2017-01-01

Dysmorphic concern (DC) refers to excessive preoccupation with a slight or imagined defect in physical appearance with social avoidance and behavior directed at controlling the defect in appearance. This study attempted to adapt the factor structure of two instruments that cover the DC construct, the Dysmorphic Concern Questionnaire (DCQ) and the Body Dysmorphic Disorder Examination Self-Report (BDDE-SR), to Spanish and establish their psychometric properties. A total of 920 subjects (62.7% women, M age = 32.44 years) participated. Exploratory and Confirmatory Factor Analysis of both scales found adequate goodness of fit indices. A one-dimensional structure was found for the DCQ and two first-order factors (dissatisfaction/preoccupation with body image (BI) and BI avoidance behavior) were identified for the BDDE-SR. The psychometric test-retest reliability and validity properties (content, convergent, and discriminant) were satisfactory. It is suggested that the DC construct includes both cognitive and behavioral aspects and may represent a continuum of severity with Body Dysmorphic Disorder at the end.

NIR Raman spectroscopy in medicine and biology: results and aspects

NASA Astrophysics Data System (ADS)

Schrader, B.; Dippel, B.; Erb, I.; Keller, S.; Löchte, T.; Schulz, H.; Tatsch, E.; Wessel, S.

1999-05-01

Analyses of biomaterial by 'classical' Raman spectroscopy with excitation in the visible range has not been possible since the fluorescence of many essential constituents of all animal and plant cells and tissues overlays the Raman spectra completely. Fluorescence, however, is virtually avoided, when Raman spectra are excited with the Nd : YAG laser line at 1064 nm. Within seven dissertations we explored different fields of potential applications to medical diagnostics. Identification and qualification of tissues and cells is possible. Tumors show small but significant differences to normal tissues; in order to develop a reliable tool for tumor diagnostics more research is necessary, especially a collection of reference spectra in a data bank is needed. Raman spectra of biomineralization structures in teeth and bones show pathological tissues as well as the development of new mineralized structures. NIR Raman spectra of flowers, leaves, and fruit show, without special preparation, their constituents: alkaloids, the essential oils, natural dyes, flavors, spices and drugs. They allow application to taxonomy, optimizing plant breeding and control of food.

DOE Office of Scientific and Technical Information (OSTI.GOV)

König, Johannes; Merle, Alexander; Totzauer, Maximilian

We investigate the early Universe production of sterile neutrino Dark Matter by the decays of singlet scalars. All previous studies applied simplifying assumptions and/or studied the process only on the level of number densities, which makes it impossible to give statements about cosmic structure formation. We overcome these issues by dropping all simplifying assumptions (except for one we showed earlier to work perfectly) and by computing the full course of Dark Matter production on the level of non-thermal momentum distribution functions. We are thus in the position to study a broad range of aspects of the resulting settings and applymore » a broad set of bounds in a reliable manner. We have a particular focus on how to incorporate bounds from structure formation on the level of the linear power spectrum, since the simplistic estimate using the free-streaming horizon clearly fails for highly non-thermal distributions. Our work comprises the most detailed and comprehensive study of sterile neutrino Dark Matter production by scalar decays presented so far.« less

Some issues in numerical simulation of nonlinear structural response

NASA Technical Reports Server (NTRS)

Hibbitt, H. D.

1989-01-01

The development of commercial finite element software is addressed. This software provides practical tools that are used in an astonishingly wide range of engineering applications that include critical aspects of the safety evaluation of nuclear power plants or of heavily loaded offshore structures in the hostile environments of the North Sea or the Arctic, major design activities associated with the development of airframes for high strength and minimum weight, thermal analysis of electronic components, and the design of sports equipment. In the more advanced application areas, the effectiveness of the product depends critically on the quality of the mechanics and mechanics related algorithms that are implemented. Algorithmic robustness is of primary concern. Those methods that should be chosen will maximize reliability with minimal understanding on the part of the user. Computational efficiency is also important because there are always limited resources, and hence problems that are too time consuming or costly. Finally, some areas where research work will provide new methods and improvements is discussed.

Development and ultra-structure of an ultra-thin silicone epidermis of bioengineered alternative tissue.

PubMed

Wessels, Quenton; Pretorius, Etheresia

2015-08-01

Burn wound care today has a primary objective of temporary or permanent wound closure. Commercially available engineered alternative tissues have become a valuable adjunct to the treatment of burn injuries. Their constituents can be biological, alloplastic or a combination of both. Here the authors describe the aspects of the development of a siloxane epidermis for a collagen-glycosaminoglycan and for nylon-based artificial skin replacement products. A method to fabricate an ultra-thin epidermal equivalent is described. Pores, to allow the escape of wound exudate, were punched and a tri-filament nylon mesh or collagen scaffold was imbedded and silicone polymerisation followed at 120°C for 5 minutes. The ultra-structure of these bilaminates was assessed through scanning electron microscopy. An ultra-thin biomedical grade siloxane film was reliably created through precision coating on a pre-treated polyethylene terephthalate carrier. © 2013 The Authors. International Wound Journal © 2013 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

Elastic plastic fracture mechanics methodology for surface cracks

NASA Astrophysics Data System (ADS)

Ernst, Hugo A.; Boatwright, D. W.; Curtin, W. J.; Lambert, D. M.

1993-08-01

The Elastic Plastic Fracture Mechanics (EPFM) Methodology has evolved significantly in the last several years. Nevertheless, some of these concepts need to be extended further before the whole methodology can be safely applied to structural parts. Specifically, there is a need to include the effect of constraint in the characterization of material resistance to crack growth and also to extend these methods to the case of 3D defects. As a consequence, this project was started as a 36 month research program with the general objective of developing an EPFM methodology to assess the structural reliability of pressure vessels and other parts of interest to NASA containing defects. This report covers a computer modelling algorithm used to simulate the growth of a semi-elliptical surface crack; the presentation of a finite element investigation that compared the theoretical (HRR) stress field to that produced by elastic and elastic-plastic models; and experimental efforts to characterize three dimensional aspects of fracture present in 'two dimensional', or planar configuration specimens.

Elastic plastic fracture mechanics methodology for surface cracks

NASA Technical Reports Server (NTRS)

Ernst, Hugo A.; Boatwright, D. W.; Curtin, W. J.; Lambert, D. M.

1993-01-01

The Elastic Plastic Fracture Mechanics (EPFM) Methodology has evolved significantly in the last several years. Nevertheless, some of these concepts need to be extended further before the whole methodology can be safely applied to structural parts. Specifically, there is a need to include the effect of constraint in the characterization of material resistance to crack growth and also to extend these methods to the case of 3D defects. As a consequence, this project was started as a 36 month research program with the general objective of developing an EPFM methodology to assess the structural reliability of pressure vessels and other parts of interest to NASA containing defects. This report covers a computer modelling algorithm used to simulate the growth of a semi-elliptical surface crack; the presentation of a finite element investigation that compared the theoretical (HRR) stress field to that produced by elastic and elastic-plastic models; and experimental efforts to characterize three dimensional aspects of fracture present in 'two dimensional', or planar configuration specimens.

Physical response of gold nanoparticles to single self-ion bombardment

DOE PAGES

Bufford, Daniel C.; Hattar, Khalid

2014-09-23

The reliability of nanomaterials depends on maintaining their specific sizes and structures. However, the stability of many nanomaterials in radiation environments remains uncertain due to the lack of a fully developed fundamental understanding of the radiation response on the nanoscale. To provide an insight into the dynamic aspects of single ion effects in nanomaterials, gold nanoparticles (NPs) with nominal diameters of 5, 20, and 60 nm were subjected to self-ion irradiation at energies of 46 keV, 2.8 MeV, and 10 MeV in situ inside of a transmission electron microscope. Ion interactions created a variety of far-from-equilibrium structures including small (~1more » nm) sputtered nanoclusters from the parent NPs of all sizes. Single ions created surface bumps and elongated nanofilaments in the 60 nm NPs. As a result, similar shape changes were observed in the 20 nm nanoparticles, while the 5 nm nanoparticles were transiently melted or explosively broken apart.« less

Civil Forensic Psychiatry - part 3: practical aspects of managing a medico-legal practice.

PubMed

Samuels, Anthony H

2018-06-01

This is the third in a series of papers on Civil Forensic Psychiatry and provides practical advice for forensic psychiatrists, general psychiatrists and trainees who are expanding or contemplating a medico-legal aspect to their practice. Attention to the practice setting, office layout, recording of information, management of documentation, screening of briefs and proper timetabling can improve safety, quality, reliability and workload manageability.

Probabilistic durability assessment of concrete structures in marine environments: Reliability and sensitivity analysis

NASA Astrophysics Data System (ADS)

Yu, Bo; Ning, Chao-lie; Li, Bing

2017-03-01

A probabilistic framework for durability assessment of concrete structures in marine environments was proposed in terms of reliability and sensitivity analysis, which takes into account the uncertainties under the environmental, material, structural and executional conditions. A time-dependent probabilistic model of chloride ingress was established first to consider the variations in various governing parameters, such as the chloride concentration, chloride diffusion coefficient, and age factor. Then the Nataf transformation was adopted to transform the non-normal random variables from the original physical space into the independent standard Normal space. After that the durability limit state function and its gradient vector with respect to the original physical parameters were derived analytically, based on which the first-order reliability method was adopted to analyze the time-dependent reliability and parametric sensitivity of concrete structures in marine environments. The accuracy of the proposed method was verified by comparing with the second-order reliability method and the Monte Carlo simulation. Finally, the influences of environmental conditions, material properties, structural parameters and execution conditions on the time-dependent reliability of concrete structures in marine environments were also investigated. The proposed probabilistic framework can be implemented in the decision-making algorithm for the maintenance and repair of deteriorating concrete structures in marine environments.

A reliability analysis of the revised competitiveness index.

PubMed

Harris, Paul B; Houston, John M

2010-06-01

This study examined the reliability of the Revised Competitiveness Index by investigating the test-retest reliability, interitem reliability, and factor structure of the measure based on a sample of 280 undergraduates (200 women, 80 men) ranging in age from 18 to 28 years (M = 20.1, SD = 2.1). The findings indicate that the Revised Competitiveness Index has high test-retest reliability, high inter-item reliability, and a stable factor structure. The results support the assertion that the Revised Competitiveness Index assesses competitiveness as a stable trait rather than a dynamic state.

Evaluation of individual quality of life among hemodialysis patients: nominated themes using SEIQoL-adapted.

PubMed

Matlabi, Hossein; Ahmadzadeh, Sharareh

2017-01-01

Quality of life (QoL) has become an important issue for patients with chronic renal failure diseases who are permanently undergoing hemodialysis. In this study, an adapted schedule for the evaluation of individual quality of life (SEIQoL-adapted) was used to evaluate QoL among hemodialysis patients, to explore their views about the most important aspects of life satisfaction. A multiple approach design and convenience sampling were applied to recruit 53 patients from a hemodialysis unit in Iran. Data were collected through structured interviews and then analyzed using conventional content analysis. A total score for QoL was calculated using scale guideline. The most important aspects of life were health, family, financial status, living conditions, leisure activities, relationships and socializing, religious and spiritual issues, medical knowledge, and therapies or treatments. The calculated mean QoL score was 66.2, indicating a relatively high life satisfaction. Males had higher QoL scores than females in both married and single groups. Moreover, the relationships between the QoL scores and education, job and marital status were not statistically significant. The SEIQoL-adapted revealed reasonable lay definitions of QoL in a group of patients following chronic renal failure. The patients' views of the aspects of life could be used by health policy makers, clinicians, and caregivers as a reliable guide to the most important priorities for treatment and medical interventions.

MEMS Reliability Assurance Activities at JPL

NASA Technical Reports Server (NTRS)

Kayali, S.; Lawton, R.; Stark, B.

2000-01-01

An overview of Microelectromechanical Systems (MEMS) reliability assurance and qualification activities at JPL is presented along with the a discussion of characterization of MEMS structures implemented on single crystal silicon, polycrystalline silicon, CMOS, and LIGA processes. Additionally, common failure modes and mechanisms affecting MEMS structures, including radiation effects, are discussed. Common reliability and qualification practices contained in the MEMS Reliability Assurance Guideline are also presented.

On-clip high frequency reliability and failure test structures

DOEpatents

Snyder, Eric S.; Campbell, David V.

1997-01-01

Self-stressing test structures for realistic high frequency reliability characterizations. An on-chip high frequency oscillator, controlled by DC signals from off-chip, provides a range of high frequency pulses to test structures. The test structures provide information with regard to a variety of reliability failure mechanisms, including hot-carriers, electromigration, and oxide breakdown. The system is normally integrated at the wafer level to predict the failure mechanisms of the production integrated circuits on the same wafer.

The Reliability of Psychiatric Diagnosis Revisited

PubMed Central

Rankin, Eric; France, Cheryl; El-Missiry, Ahmed; John, Collin

2006-01-01

Background: The authors reviewed the topic of reliability of psychiatric diagnosis from the turn of the 20th century to present. The objectives of this paper are to explore the reasons of unreliability of psychiatric diagnosis and propose ways to improve the reliability of psychiatric diagnosis. Method: The authors reviewed the literature on the concept of reliability of psychiatric diagnosis with emphasis on the impact of interviewing skills, use of diagnostic criteria, and structured interviews on the reliability of psychiatric diagnosis. Results: Causes of diagnostic unreliability are attributed to the patient, the clinician and psychiatric nomenclature. The reliability of psychiatric diagnosis can be enhanced by using diagnostic criteria, defining psychiatric symptoms and structuring the interviews. Conclusions: The authors propose the acronym ‘DR.SED,' which stands for diagnostic criteria, reference definitions, structuring the interview, clinical experience, and data. The authors recommend that clinicians use the DR.SED paradigm to improve the reliability of psychiatric diagnoses. PMID:21103149

Analysis of whisker-toughened CMC structural components using an interactive reliability model

NASA Technical Reports Server (NTRS)

Duffy, Stephen F.; Palko, Joseph L.

1992-01-01

Realizing wider utilization of ceramic matrix composites (CMC) requires the development of advanced structural analysis technologies. This article focuses on the use of interactive reliability models to predict component probability of failure. The deterministic William-Warnke failure criterion serves as theoretical basis for the reliability model presented here. The model has been implemented into a test-bed software program. This computer program has been coupled to a general-purpose finite element program. A simple structural problem is presented to illustrate the reliability model and the computer algorithm.

Laboratory Scale Electrodeposition. Practice and Applications.

ERIC Educational Resources Information Center

Bruno, Thomas J.

1986-01-01

Discusses some aspects of electrodeposition and electroplating. Emphasizes the materials, techniques, and safety precautions necessary to make electrodeposition work reliably in the chemistry laboratory. Describes some problem-solving applications of this process. (TW)

Strain Gauges Based on CVD Graphene Layers and Exfoliated Graphene Nanoplatelets with Enhanced Reproducibility and Scalability for Large Quantities

PubMed Central

Yokaribas, Volkan; Schneider, Daniel S.; Friebertshäuser, Philipp; Lemme, Max C.; Fritzen, Claus-Peter

2017-01-01

The two-dimensional material graphene promises a broad variety of sensing activities. Based on its low weight and high versatility, the sensor density can significantly be increased on a structure, which can improve reliability and reduce fluctuation in damage detection strategies such as structural health monitoring (SHM). Moreover; it initializes the basis of structure–sensor fusion towards self-sensing structures. Strain gauges are extensively used sensors in scientific and industrial applications. In this work, sensing in small strain fields (from −0.1% up to 0.1%) with regard to structural dynamics of a mechanical structure is presented with sensitivities comparable to bulk materials by measuring the inherent piezoresistive effect of graphene grown by chemical vapor deposition (CVD) with a very high aspect ratio of approximately 4.86 × 108. It is demonstrated that the increasing number of graphene layers with CVD graphene plays a key role in reproducible strain gauge application since defects of individual layers may become less important in the current path. This may lead to a more stable response and, thus, resulting in a lower scattering.. Further results demonstrate the piezoresistive effect in a network consisting of liquid exfoliated graphene nanoplatelets (GNP), which result in even higher strain sensitivity and reproducibility. A model-assisted approach provides the main parameters to find an optimum of sensitivity and reproducibility of GNP films. The fabricated GNP strain gauges show a minimal deviation in PRE effect with a GF of approximately 5.6 and predict a linear electromechanical behaviour up to 1% strain. Spray deposition is used to develop a low-cost and scalable manufacturing process for GNP strain gauges. In this context, the challenge of reproducible and reliable manufacturing and operating must be overcome. The developed sensors exhibit strain gauges by considering the significant importance of reproducible sensor performances and open the path for graphene strain gauges for potential usages in science and industry. PMID:29258260

Alkaloids and leishmania donovani UDP-galactopyarnose mutase: Anovel approach in drug designing against Visceral leishmaniasis.

PubMed

Srivastava, Ankita; Chandra, Deepak

2017-06-05

The unsatisfactory treatment options for Visceral Leishmaniasis (VL), needs identification of new drug targets. Among natural products, Alkaloids have been proved to be highly effective against number of diseases. In Leishmania UDP-galactopyranose mutase (UGM) is a critical enzyme required for cell wall synthesis and thus a drug target for structure based drug designing against L. donovani. To build the homology model of UDP galactopyranse mutase and investigate the interaction of selected alkaloids with this modeled UDP galactopyranose mutase by molecular docking. Since there is no crystal structure record has been found with this protein, a homology modeling was performed and a three dimensional structure of L. donovani UGM was created using MODELLER v9.9, structure quality was validated using PROCHECK and QMEAN programs which confirms that the structure is reliable. Further Molecular docking was performed with previously reported 15 alkaloids. It was found that Protopine shows a binding energy of -12.39Kcal/mole, binds at Flavin adenine dinucleotide (FAD) biding site. Concluding that Protopine, an alkaloid could interrupt the functional aspect of L. donovani UGM and thus may be useful for drug designing studies. These finding would contribute to the understanding of effect of drug on the parasite. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Therapeutic risk management of the suicidal patient: augmenting clinical suicide risk assessment with structured instruments.

PubMed

Homaifar, Beeta; Matarazzo, Bridget; Wortzel, Hal S

2013-09-01

This column is the second in a series presenting a model for therapeutic risk management of the suicidal patient. As discussed in the first part of the series, the model involves several elements including augmenting clinical risk assessment with structured instruments, stratifying risk in terms of both severity and temporality, and developing and documenting a safety plan. This column explores in more detail how to augment clinical risk assessment with structured instruments. Unstructured clinical interviews have the potential to miss important aspects of suicide risk assessment. By augmenting the free-form clinical interview with structured instruments that demonstrate reliability and validity, a more nuanced and multifaceted approach to suicide risk assessment is achieved. Incorporating structured instruments into practice also serves a medicolegal function, since these instruments may become a living part of the medical record, establishing baseline levels of suicidal thoughts and behaviors and facilitating future clinical determinations regarding safety needs. We describe several instruments used in a multidisciplinary suicide consultation service, each of which has demonstrated relevance to suicide risk assessment and screening, ease of administration, and strong psychometric properties. In addition, we emphasize the importance of viewing suicide risk assessment as an ongoing process rather than as a singular event. Finally, we discuss special considerations in the evolving practice of risk assessment.

A holistic view of crystalline silicon module reliability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanoka, J.I.

1995-11-01

Several aspects of module reliability are discussed, particularly with reference to the encapsulant and its interaction with the metallization and interconnection of a module. A need to look at the module as a whole single unit is stressed. Also, the issue of a slight light degradation effect in crystalline silicon cells is discussed. A model for this is mentioned and it may well be that polycrystalline cells with dislocations may have an advantage.

Research to Assembly Scheme for Satellite Deck Based on Robot Flexibility Control Principle

NASA Astrophysics Data System (ADS)

Guo, Tao; Hu, Ruiqin; Xiao, Zhengyi; Zhao, Jingjing; Fang, Zhikai

2018-03-01

Deck assembly is critical quality control point in final satellite assembly process, and cable extrusion and structure collision problems in assembly process will affect development quality and progress of satellite directly. Aimed at problems existing in deck assembly process, assembly project scheme for satellite deck based on robot flexibility control principle is proposed in this paper. Scheme is introduced firstly; secondly, key technologies on end force perception and flexible docking control in the scheme are studied; then, implementation process of assembly scheme for satellite deck is described in detail; finally, actual application case of assembly scheme is given. Result shows that compared with traditional assembly scheme, assembly scheme for satellite deck based on robot flexibility control principle has obvious advantages in work efficiency, reliability and universality aspects etc.

DVI missions in the Carribean-the practical aspects of disaster victim identification.

PubMed

Winskog, Calle

2012-06-01

Human trafficking of young men from Africa to Europe is a crime with often devastating consequences. The African continent loses members of the younger generation and many die during the attempt to reach their destinations. The identification of these victims is often difficult, however the structured and by now well-established procedures utilizing standard disaster victim identification protocols provide a reliable and functional approach. The logistics involved are straightforward, and one of the many functions of the team leader is to monitor and control the flow of cases through the system. The importance of ante mortem data for the purposes of identification is clear-no ante mortem data means no identification. Two different missions conducted in the Caribbean are described to illustrate particular difficulties that may occur.

Flow dichroism as a reliable method to measure the hydrodynamic aspect ratio of gold nanoparticles.

PubMed

Reddy, Naveen Krishna; Pérez-Juste, Jorge; Pastoriza-Santos, Isabel; Lang, Peter R; Dhont, Jan K G; Liz-Marzán, Luis M; Vermant, Jan

2011-06-28

Particle shape plays an important role in controlling the optical, magnetic, and mechanical properties of nanoparticle suspensions as well as nanocomposites. However, characterizing the size, shape, and the associated polydispersity of nanoparticles is not straightforward. Electron microscopy provides an accurate measurement of the geometric properties, but sample preparation can be laborious, and to obtain statistically relevant data many particles need to be analyzed separately. Moreover, when the particles are suspended in a fluid, it is important to measure their hydrodynamic properties, as they determine aspects such as diffusion and the rheological behavior of suspensions. Methods that evaluate the dynamics of nanoparticles such as light scattering and rheo-optical methods accurately provide these hydrodynamic properties, but do necessitate a sufficient optical response. In the present work, three different methods for characterizing nonspherical gold nanoparticles are critically compared, especially taking into account the complex optical response of these particles. The different methods are evaluated in terms of their versatility to asses size, shape, and polydispersity. Among these, the rheo-optical technique is shown to be the most reliable method to obtain hydrodynamic aspect ratio and polydispersity for nonspherical gold nanoparticles for two reasons. First, the use of the evolution of the orientation angle makes effects of polydispersity less important. Second, the use of an external flow field gives a mathematically more robust relation between particle motion and aspect ratio, especially for particles with relatively small aspect ratios.

Modus operandi and affect in Sweden: the Swedish version of the Regulatory Mode Questionnaire

PubMed Central

Nima, Ali Al; Mihailovic, Marko

2017-01-01

Background The Regulatory Mode Questionnaire (RMQ) is the most used and internationally well-known instrument for the measurement of individual differences in the two self-regulatory modes: locomotion (i.e., the aspect of self-regulation that is concerned with movement from state to state) and assessment (i.e., the comparative aspect of self-regulation). The aim of the present study was to verify the independence of the two regulatory modes, as postulated by the Regulatory Mode Theory (Kruglanski et al., 2000), and the psychometric properties of the RMQ in the Swedish context. Furthermore, we investigated the relationship between regulatory modes (locomotion and assessment) and affective well-being (i.e., positive affect and negative affect). Method A total of 655 university and high school students in the West of Sweden (males = 408 females = 242, and five participants who didn’t report their gender; agemean = 21.93 ± 6.51) responded to the RMQ and the Positive Affect Negative Affect Schedule. We conducted two confirmatory factor analyses using structural equation modeling (SEM). A third SEM was conducted to test the relationship between locomotion and assessment to positive affect and negative affect. Results The first analyses confirmed the unidimensional factor structure of locomotion and assessment and both scales showed good reliability. The assessment scale, however, was modified by dropping item 10 (“I don’t spend much time thinking about ways others could improve themselves”.) because it showed low loading (.07, p = .115). Furthermore, the effect of locomotion on positive affect was stronger than the effect of assessment on positive affect (Z = −15.16, p < .001), while the effect of assessment on negative affect was stronger than the effect of locomotion on negative affect (Z = 10.73, p < .001). Conclusion The factor structure of the Swedish version of the RMQ is, as Regulatory Mode Theory suggests, unidimensional and it showed good reliability. The scales discriminated between the two affective well-being dimensions. We suggest that the Swedish version of the RMQ, with only minor modifications, is a useful instrument to tap individual differences in locomotion and assessment. Hence, the present study contributes to the validation of the RMQ in the Swedish culture and adds support to the theoretical framework of self-regulatory mode. PMID:29181282

On-clip high frequency reliability and failure test structures

DOEpatents

Snyder, E.S.; Campbell, D.V.

1997-04-29

Self-stressing test structures for realistic high frequency reliability characterizations. An on-chip high frequency oscillator, controlled by DC signals from off-chip, provides a range of high frequency pulses to test structures. The test structures provide information with regard to a variety of reliability failure mechanisms, including hot-carriers, electromigration, and oxide breakdown. The system is normally integrated at the wafer level to predict the failure mechanisms of the production integrated circuits on the same wafer. 22 figs.

Structural system reliability calculation using a probabilistic fault tree analysis method

NASA Technical Reports Server (NTRS)

Torng, T. Y.; Wu, Y.-T.; Millwater, H. R.

1992-01-01

The development of a new probabilistic fault tree analysis (PFTA) method for calculating structural system reliability is summarized. The proposed PFTA procedure includes: developing a fault tree to represent the complex structural system, constructing an approximation function for each bottom event, determining a dominant sampling sequence for all bottom events, and calculating the system reliability using an adaptive importance sampling method. PFTA is suitable for complicated structural problems that require computer-intensive computer calculations. A computer program has been developed to implement the PFTA.

An experimental investigation of fault tolerant software structures in an avionics application

NASA Technical Reports Server (NTRS)

Caglayan, Alper K.; Eckhardt, Dave E., Jr.

1989-01-01

The objective of this experimental investigation is to compare the functional performance and software reliability of competing fault tolerant software structures utilizing software diversity. In this experiment, three versions of the redundancy management software for a skewed sensor array have been developed using three diverse failure detection and isolation algorithms and incorporated into various N-version, recovery block and hybrid software structures. The empirical results show that, for maximum functional performance improvement in the selected application domain, the results of diverse algorithms should be voted before being processed by multiple versions without enforced diversity. Results also suggest that when the reliability gain with an N-version structure is modest, recovery block structures are more feasible since higher reliability can be obtained using an acceptance check with a modest reliability.

Development and validation of sustainability criteria of administrative green schools in Iran.

PubMed

Meiboudi, Hossein; Lahijanian, Akramolmolok; Shobeiri, Seyed Mohammad; Jozi, Seyed Ali; Azizinezhad, Reza

2017-07-15

Environmental responsibility in school has led to the emergence of a variety of criteria to administer green schools' contributions to sustainability. Sustainability criteria of administrative green schools need validity, reliability and norms. The aim of the current study was to develop and validate assessment criteria for green schools in Iran based on the role of academia. A national survey was conducted to obtain data on sustainability criteria initiatives for green schools and the Iranian profile was defined. An initial pool of 71 items was generated and after its first edition, 63 items were selected to comprise the sustainability criteria. Engineering-architectural and behavioral aspects of this sustainability criteria were evaluated through a sample of 1218 graduate students with environmental degrees from Iran's universities. Exploratory factor analysis using principal components and promax rotation method showed that these 9 criteria have simple structures and are consistent with the theoretical framework. The reliability coefficients of subscales ranged between 0.62 (participation) and 0.84 (building location and position). The study's survey of correlation coefficients between items and subscales illustrated that those coefficients varied between 0.24 and 0.68. Copyright © 2017 Elsevier Ltd. All rights reserved.

The development and validation of the Physical Appearance Comparison Scale-3 (PACS-3).

PubMed

Schaefer, Lauren M; Thompson, J Kevin

2018-05-21

Appearance comparison processes are implicated in the development of body-image disturbance and disordered eating. The Physical Appearance Comparison Scale-Revised (PACS-R) assesses the simple frequency of appearance comparisons; however, research has suggested that other aspects of appearance comparisons (e.g., comparison direction) may moderate the association between comparisons and their negative outcomes. In the current study, the PACS-R was revised to examine aspects of comparisons with relevance to body-image and eating outcomes. Specifically, the measure was modified to examine (a) dimensions of physical appearance relevant to men and women (i.e., weight-shape, muscularity, and overall physical appearance), (b) comparisons with proximal and distal targets, (c) upward versus downward comparisons, and (d) the acute emotional impact of comparisons. The newly revised measure, labeled the PACS-3, along with existing measures of appearance comparison, body satisfaction, eating pathology, and self-esteem, was completed by 1,533 college men and women. Exploratory and confirmatory factor analyses were conducted to examine the factor structure of the PACS-3. In addition, the reliability, convergent validity, and incremental validity of the PACS-3 scores were examined. The final PACS-3 comprises 27 items and 9 subscales: Proximal: Frequency, Distal: Frequency, Muscular: Frequency, Proximal: Direction, Distal: Direction, Muscular: Direction, Proximal: Effect, Distal: Effect, and Muscular: Effect. the PACS-3 subscale scores demonstrated good reliability and convergent validity. Moreover, the PACS-3 subscales greatly improved the prediction of body satisfaction and disordered eating relative to existing measures of appearance comparison. Overall, the PACS-3 improves upon existing scales and offers a comprehensive assessment of appearance-comparison processes. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Measurement of stable changes of self-management skills after rehabilitation: a latent state-trait analysis of the Health Education Impact Questionnaire (heiQ™).

PubMed

Schuler, M; Musekamp, G; Bengel, J; Schwarze, M; Spanier, K; Gutenbrunner, Chr; Ehlebracht-König, I; Nolte, S; Osborne, R H; Faller, H

2014-11-01

To assess stable effects of self-management programs, measurement instruments should primarily capture the attributes of interest, for example, the self-management skills of the measured persons. However, measurements of psychological constructs are always influenced by both aspects of the situation (states) and aspects of the person (traits). This study tests whether the Health Education Impact Questionnaire (heiQ™), an instrument assessing a wide range of proximal outcomes of self-management programs, is primarily influenced by person factors instead of situational factors. Furthermore, measurement invariance over time, changes in traits and predictors of change for each heiQ™ scale were examined. Subjects were N = 580 patients with rheumatism, asthma, orthopedic conditions or inflammatory bowel disease, who filled out the heiQ™ at the beginning, the end of and 3 months after a disease-specific inpatient rehabilitation program in Germany. Structural equation modeling techniques were used to estimate latent trait-change models and test for measurement invariance in each heiQ™ scale. Coefficients of consistency, occasion specificity and reliability were computed. All scales showed scalar invariance over time. Reliability coefficients were high (0.80-0.94), and consistency coefficients (0.49-0.79) were always substantially higher than occasion specificity coefficients (0.14-0.38), indicating that the heiQ™ scales primarily capture person factors. Trait-changes with small to medium effect sizes were shown in five scales and were affected by sex, age and diagnostic group. The heiQ™ can be used to assess stable effects in important outcomes of self-management programs over time, e.g., changes in self-management skills or emotional well-being.

Measuring social isolation among older adults using multiple indicators from the NSHAP study.

PubMed

Cornwell, Erin York; Waite, Linda J

2009-11-01

The National Social Life, Health, and Aging Project (NSHAP) data contain multiple indicators of social connectedness, social participation, social support, and loneliness among older adults. We suggest that these indicators can be combined to measure two aspects of social isolation: social disconnectedness (i.e., physical separation from others) and perceived isolation (i.e., feelings of loneliness and a lack of social support). We use the NSHAP data to create scales measuring social disconnectedness and perceived isolation and examine their distribution among older adults. We assess the reliability of the scales using Cronbach's alpha and item-total correlations and perform confirmatory factor analysis to test the model against the data. Finally, we test differences in scale means across subgroups to assess the distribution of social disconnectedness and perceived isolation among older adults. We find that 17 indicators combine into two reliable scales. The social disconnectedness scale has a two-factor structure, including the restricted social network dimension and the social inactivity dimension. The perceived isolation scale also comprises two dimensions: lack of support and loneliness. We find that social disconnectedness does not vary across age groups, but the oldest old feel more isolated than the young old. Social disconnectedness and perceived isolation are greater among those who have worse health. Discussion The creation of scales measuring social disconnectedness and perceived isolation provides one way to utilize the wide variety of indicators of social isolation collected in the NSHAP study. Although individual indicators of social connectedness or isolation are useful in their own right, these scales provide parsimonious, continuous variables that account for a variety of aspects of social isolation, which may be especially useful for inclusion in multivariate analyses predicting health outcomes.

Best Practices for Reliable and Robust Spacecraft Structures

NASA Technical Reports Server (NTRS)

Raju, Ivatury S.; Murthy, P. L. N.; Patel, Naresh R.; Bonacuse, Peter J.; Elliott, Kenny B.; Gordon, S. A.; Gyekenyesi, J. P.; Daso, E. O.; Aggarwal, P.; Tillman, R. F.

2007-01-01

A study was undertaken to capture the best practices for the development of reliable and robust spacecraft structures for NASA s next generation cargo and crewed launch vehicles. In this study, the NASA heritage programs such as Mercury, Gemini, Apollo, and the Space Shuttle program were examined. A series of lessons learned during the NASA and DoD heritage programs are captured. The processes that "make the right structural system" are examined along with the processes to "make the structural system right". The impact of technology advancements in materials and analysis and testing methods on reliability and robustness of spacecraft structures is studied. The best practices and lessons learned are extracted from these studies. Since the first human space flight, the best practices for reliable and robust spacecraft structures appear to be well established, understood, and articulated by each generation of designers and engineers. However, these best practices apparently have not always been followed. When the best practices are ignored or short cuts are taken, risks accumulate, and reliability suffers. Thus program managers need to be vigilant of circumstances and situations that tend to violate best practices. Adherence to the best practices may help develop spacecraft systems with high reliability and robustness against certain anomalies and unforeseen events.

3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes.

PubMed

Vijayavenkataraman, S; Lu, W F; Fuh, J Y H

2016-09-08

The skin is the largest organ of the body, having a complex multi-layered structure and guards the underlying muscles, bones, ligaments, and internal organs. It serves as the first line of defence to any external stimuli, hence it is the most vulnerable to injury and warrants the need for rapid and reliable regeneration methods. Tissue engineered skin substitutes help overcome the limitations of traditional skin treatment methods, in terms of technology, time, and cost. While there is commendable progress in the treating of superficial wounds and injuries with skin substitutes, treatment of full-thickness injuries, especially with third or fourth degree burns, still looks murkier. Engineering multi-layer skin architecture, conforming to the native skin structure is a tougher goal to achieve with the current tissue engineering methods, if not impossible, restoring all the functions of the native skin. The testing of drugs and cosmetics is another area, where engineered skins are very much needed, with bans being imposed on product testing on animals. Given this greater need, 3D bioprinting is a promising technology that can achieve rapid and reliable production of biomimetic cellular skin substitutes, satisfying both clinical and industrial needs. This paper reviews all aspects related to the 3D bioprinting of skin, right from imaging the injury site, 3D model creation, biomaterials that are used and their suitability, types of cells and their functions, actual bioprinting technologies, along with the challenges and future prospects.

A Simplified and Reliable Damage Method for the Prediction of the Composites Pieces

NASA Astrophysics Data System (ADS)

Viale, R.; Coquillard, M.; Seytre, C.

2012-07-01

Structural engineers are often faced to test results on composite structures largely tougher than predicted. By attempting to reduce this frequent gap, a survey of some extensive synthesis works relative to the prediction methods and to the failure criteria was led. This inquiry dealts with the plane stress state only. All classical methods have strong and weak points wrt practice and reliability aspects. The main conclusion is that in the plane stress case, the best usaul industrial methods give predictions rather similar. But very generally they do not explain the often large discrepancies wrt the tests, mainly in the cases of strong stress gradients or of bi-axial laminate loadings. It seems that only the methods considering the complexity of the composites damages (so-called physical methods or Continuum Damage Mechanics “CDM”) bring a clear mending wrt the usual methods..The only drawback of these methods is their relative intricacy mainly in urged industrial conditions. A method with an approaching but simplified representation of the CDM phenomenology is presented. It was compared to tests and other methods: - it brings a fear improvement of the correlation with tests wrt the usual industrial methods, - it gives results very similar to the painstaking CDM methods and very close to the test results. Several examples are provided. In addition this method is really thrifty wrt the material characterization as well as for the modelisation and the computation efforts.

The somatic symptom scale-8 (SSS-8): a brief measure of somatic symptom burden.

PubMed

Gierk, Benjamin; Kohlmann, Sebastian; Kroenke, Kurt; Spangenberg, Lena; Zenger, Markus; Brähler, Elmar; Löwe, Bernd

2014-03-01

Somatic symptoms are the core features of many medical diseases, and they are used to evaluate the severity and course of illness. The 8-item Somatic Symptom Scale (SSS-8) was recently developed as a brief, patient-reported outcome measure of somatic symptom burden, but its reliability, validity, and usefulness have not yet been tested. To investigate the reliability, validity, and severity categories as well as the reference scores of the SSS-8. A national, representative general-population survey was performed between June 15, 2012, and July 15, 2012, in Germany, including 2510 individuals older than 13 years. The SSS-8 mean (SD), item-total correlations, Cronbach α, factor structure, associations with measures of construct validity (Patient Health Questionnaire-2 depression scale, Generalized Anxiety Disorder-2 scale, visual analog scale for general health status, 12-month health care use), severity categories, and percentile rank reference scores. The SSS-8 had excellent item characteristics and good reliability (Cronbach α = 0.81). The factor structure reflects gastrointestinal, pain, fatigue, and cardiopulmonary aspects of the general somatic symptom burden. Somatic symptom burden as measured by the SSS-8 was significantly associated with depression (r = 0.57 [95% CI, 0.54 to 0.60]), anxiety (r = 0.55 [95% CI, 0.52 to 0.58]), general health status (r = -0.24 [95% CI, -0.28 to -0.20]), and health care use (incidence rate ratio, 1.12 [95% CI, 1.10 to 1.14]). The SSS-8 severity categories were calculated in accordance with percentile ranks: no to minimal (0-3 points), low (4-7 points), medium (8-11 points), high (12-15 points), and very high (16-32 points) somatic symptom burden. For every SSS-8 severity category increase, there was a 53% (95% CI, 44% to 63%) increase in health care visits. The SSS-8 is a reliable and valid self-report measure of somatic symptom burden. Cutoff scores identify individuals with low, medium, high, and very high somatic symptom burden.

The Acceptance of Universalism: The Importance of Selected Aspects of School Structure.

ERIC Educational Resources Information Center

Martin, Robert A.

This report describes a study that investigated empirically the relationships between selected aspects of the organizational structure of elementary schools and the extent to which students endorsed the norm of universalism. Four aspects of structure were studied: degree of departmentalization, school enrollment, student-teacher ratio, and extent…

Probing the Detailed Seismic Velocity Structure of Subduction Zones Using Advanced Seismic Tomography Methods

NASA Astrophysics Data System (ADS)

Zhang, H.; Thurber, C. H.

2005-12-01

Subduction zones are one of the most important components of the Earth's plate tectonic system. Knowing the detailed seismic velocity structure within and around subducting slabs is vital to understand the constitution of the slab, the cause of intermediate depth earthquakes inside the slab, the fluid distribution and recycling, and tremor occurrence [Hacker et al., 2001; Obara, 2002].Thanks to the ability of double-difference tomography [Zhang and Thurber, 2003] to resolve the fine-scale structure near the source region and the favorable seismicity distribution inside many subducting slabs, it is now possible to characterize the fine details of the velocity structure and earthquake locations inside the slab, as shown in the study of the Japan subduction zone [Zhang et al., 2004]. We further develop the double-difference tomography method in two aspects: the first improvement is to use an adaptive inversion mesh rather than a regular inversion grid and the second improvement is to determine a reliable Vp/Vs structure using various strategies rather than directly from Vp and Vs [see our abstract ``Strategies to solve for a better Vp/Vs model using P and S arrival time'' at Session T29]. The adaptive mesh seismic tomography method is based on tetrahedral diagrams and can automatically adjust the inversion mesh according to the ray distribution so that the inversion mesh nodes are denser where there are more rays and vice versa [Zhang and Thurber, 2005]. As a result, the number of inversion mesh nodes is greatly reduced compared to a regular inversion grid with comparable spatial resolution, and the tomographic system is more stable and better conditioned. This improvement is quite valuable for characterizing the fine structure of the subduction zone considering the highly uneven distribution of earthquakes within and around the subducting slab. The second improvement, to determine a reliable Vp/Vs model, lies in jointly inverting Vp, Vs, and Vp/Vs using P, S, and S-P times in a manner similar to double-difference tomography. Obtaining a reliable Vp/Vs model of the subduction zone is more helpful for understanding its mechanical and petrologic properties. Our applications of the original version of double-difference tomography to several subduction zones beneath northern Honshu, Japan, the Wellington region, New Zealand, and Alaska, United States, have shown evident velocity variations within and around the subducting slab, which likely is evidence of dehydration reactions of various hydrous minerals that are hypothesized to be responsible for intermediate depth earthquakes. We will show the new velocity models for these subduction zones by applying our advanced tomographic methods.

Study of structural reliability of existing concrete structures

NASA Astrophysics Data System (ADS)

Druķis, P.; Gaile, L.; Valtere, K.; Pakrastiņš, L.; Goremikins, V.

2017-10-01

Structural reliability of buildings has become an important issue after the collapse of a shopping center in Riga 21.11.2013, caused the death of 54 people. The reliability of a building is the practice of designing, constructing, operating, maintaining and removing buildings in ways that ensure maintained health, ward suffered injuries or death due to use of the building. Evaluation and improvement of existing buildings is becoming more and more important. For a large part of existing buildings, the design life has been reached or will be reached in the near future. The structures of these buildings need to be reassessed in order to find out whether the safety requirements are met. The safety requirements provided by the Eurocodes are a starting point for the assessment of safety. However, it would be uneconomical to require all existing buildings and structures to comply fully with these new codes and corresponding safety levels, therefore the assessment of existing buildings differs with each design situation. This case study describes the simple and practical procedure of determination of minimal reliability index β of existing concrete structures designed by different codes than Eurocodes and allows to reassess the actual reliability level of different structural elements of existing buildings under design load.

Design of high reliability organizations in health care.

PubMed

Carroll, J S; Rudolph, J W

2006-12-01

To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self-understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self-design for safety and reliability.

Reliability Modeling of Double Beam Bridge Crane

NASA Astrophysics Data System (ADS)

Han, Zhu; Tong, Yifei; Luan, Jiahui; Xiangdong, Li

2018-05-01

This paper briefly described the structure of double beam bridge crane and the basic parameters of double beam bridge crane are defined. According to the structure and system division of double beam bridge crane, the reliability architecture of double beam bridge crane system is proposed, and the reliability mathematical model is constructed.

Development and reliability of a structured interview guide for the Montgomery Asberg Depression Rating Scale (SIGMA).

PubMed

Williams, Janet B W; Kobak, Kenneth A

2008-01-01

The Montgomery-Asberg Depression Rating Scale (MADRS) is often used in clinical trials to select patients and to assess treatment efficacy. The scale was originally published without suggested questions for clinicians to use in gathering the information necessary to rate the items. Structured and semi-structured interview guides have been found to improve reliability with other scales. To describe the development and test-retest reliability of a structured interview guide for the MADRS (SIGMA). A total of 162 test-retest interviews were conducted by 81 rater pairs. Each patient was interviewed twice, once by each rater conducting an independent interview. The intraclass correlation for total score between raters using the SIGMA was r=0.93, P<0.0001. All ten items had good to excellent interrater reliability. Use of the SIGMA can result in high reliability of MADRS scores in evaluating patients with depression.

Psychometrics of the MHSIP Adult Consumer Survey.

PubMed

Jerrell, Jeanette M

2006-10-01

The reliability and validity of the Mental Health Statistics Improvement Program (MHSIP) Adult Consumer Survey were assessed in a statewide convenience sample of 459 persons with severe mental illness served through a public mental health system. Consistent with previous findings and the intent of its developers, three factors were identified that demonstrate good internal consistency, moderate test-retest reliability, and good convergent validity with consumer perceptions of other aspects of their care. The reliability and validity of the MHSIP Adult Consumer Survey documented in this study underscore its scientific and practical utility as an abbreviated tool for assessing access, quality and appropriateness, and outcome in mental health service systems.

Analysis on Sealing Reliability of Bolted Joint Ball Head Component of Satellite Propulsion System

NASA Astrophysics Data System (ADS)

Guo, Tao; Fan, Yougao; Gao, Feng; Gu, Shixin; Wang, Wei

2018-01-01

Propulsion system is one of the important subsystems of satellite, and its performance directly affects the service life, attitude control and reliability of the satellite. The Paper analyzes the sealing principle of bolted joint ball head component of satellite propulsion system and discuss from the compatibility of hydrazine anhydrous and bolted joint ball head component, influence of ground environment on the sealing performance of bolted joint ball heads, and material failure caused by environment, showing that the sealing reliability of bolted joint ball head component is good and the influence of above three aspects on sealing of bolted joint ball head component can be ignored.

Development of a Brazilian Portuguese adapted version of the Gap-Kalamazoo communication skills assessment form.

PubMed

Amaral, Anna Beatriz C N; Rider, Elizabeth A; Lajolo, Paula P; Tone, Luiz G; Pinto, Rogerio M C; Lajolo, Marisa P; Calhoun, Aaron W

2016-12-11

The goal of this study was to translate, adapt and validate the items of the Gap-Kalamazoo Communication Skills Assessment Form for use in the Brazilian cultural setting. The Gap-Kalamazoo Communication Skills Assessment Form was translated into Portuguese by two independent bilingual Brazilian translators and was reconciled by a third bilingual healthcare professional. The translated text was then assessed for content using a modified Delphi technique and adjusted as needed to assure content validity. A total of nine phrases in the completed tool were adjusted. The final tool was then used to assess videotaped simulations as a means of validation.  Response process was assessed using exploratory factor analysis and internal structure was assessed via Cronbach's Alpha (internal consistency) and Intraclass Correlation (test-retest reliability and inter-rater reliability). One hundred and four (104) videotaped communication skills simulations were assessed by 38 subjects (6 staff physicians, 4 faculty physicians, 8 resident physicians, 4 professional actors with experience in simulation, and 16 other allied healthcare professionals). Measures of Internal consistency (Cronbach's alpha = 0.818) and test-retest reliability (intra-class correlation coefficient = 0.942) were high.  Exploratory factor analysis confirmed the uni-dimensionality of the instrument. Our results support the validity and reliability of the Brazilian Gap-Kalamazoo Communication Skills Assessment Form when used among Brazilian medical residents.  The Brazilian version of Gap-Kalamazoo Communication Skills Assessment Form was found to be adequate both in the linguistic and technical aspects.  The use of this instrument in Brazilian medical education can enhance the assessment of physician-patient-team relationships on an ongoing basis.

A competency based selection procedure for Dutch postgraduate GP training: a pilot study on validity and reliability.

PubMed

Vermeulen, Margit I; Tromp, Fred; Zuithoff, Nicolaas P A; Pieters, Ron H M; Damoiseaux, Roger A M J; Kuyvenhoven, Marijke M

2014-12-01

Abstract Background: Historically, semi-structured interviews (SSI) have been the core of the Dutch selection for postgraduate general practice (GP) training. This paper describes a pilot study on a newly designed competency-based selection procedure that assesses whether candidates have the competencies that are required to complete GP training. The objective was to explore reliability and validity aspects of the instruments developed. The new selection procedure comprising the National GP Knowledge Test (LHK), a situational judgement tests (SJT), a patterned behaviour descriptive interview (PBDI) and a simulated encounter (SIM) was piloted alongside the current procedure. Forty-seven candidates volunteered in both procedures. Admission decision was based on the results of the current procedure. Study participants did hardly differ from the other candidates. The mean scores of the candidates on the LHK and SJT were 21.9 % (SD 8.7) and 83.8% (SD 3.1), respectively. The mean self-reported competency scores (PBDI) were higher than the observed competencies (SIM): 3.7(SD 0.5) and 2.9(SD 0.6), respectively. Content-related competencies showed low correlations with one another when measured with different instruments, whereas more diverse competencies measured by a single instrument showed strong to moderate correlations. Moreover, a moderate correlation between LHK and SJT was found. The internal consistencies (intraclass correlation, ICC) of LHK and SJT were poor while the ICC of PBDI and SIM showed acceptable levels of reliability. Findings on content validity and reliability of these new instruments are promising to realize a competency based procedure. Further development of the instruments and research on predictive validity should be pursued.

Development and validation of the Vellore Occupational Therapy Evaluation Scale to assess functioning in people with mental illness.

PubMed

Samuel, Reema; Russell, Paul Ss; Paraseth, Tapan Kumar; Ernest, Sharmila; Jacob, K S

2016-08-26

Available occupational therapy assessment scales focus on specific areas of functioning. There is a need for comprehensive evaluation of diverse aspects of functioning in people with mental illness. To develop a comprehensive assessment scale to evaluate diverse aspects of functioning among people with mental illness and to assess its validity and reliability. Available instruments, which evaluate diverse aspects of functioning in people with mental illness, were retrieved. Relevant items, which evaluate specific functions, were selected by a committee of mental health experts and combined to form a comprehensive instrument. Face and content validity and feasibility were assessed and the new instrument was piloted among 60 patients with mental illness. The final version of the instrument was employed in 151 consecutive clients, between 18 and 60 years of age, who were also assessed using Global Assessment of Functioning (GAF), Occupational Therapy Task Observation Scale (OTTOS), Social Functioning Questionnaire (SFQ), Rosenberg Self Esteem Scale (RSES) and Pai and Kapur Family Burden Interview Schedule (FBIS) by two therapists. The inter-rater reliability and test-retest reliability of the new instrument (Vellore Occupational Therapy Evaluation Scale (VOTES)) were also evaluated. The new scale had good internal consistency (Cronbach's alpha = .817), inter-rater reliability .928 (.877-.958) and test-retest reliability .928 (.868-.961). The correlation between the general behaviour domain (Pearson's Correlation Coefficient [PCC] = -.763, p = .000), task behaviour (PCC = -.829, p = .000), social skills (PCC = -.351, p = .000), intrapersonal skills (PCC = -.208, p = .010), instrumental activities of daily living (IADL) (PCC = -.329, p = .038) and leisure activities (PCC = -.433, p = .005) scores of VOTES with the corresponding domains in the scales used for comparison was statistically significant. The correlation between the total score of VOTES and the total scores of OTTOS, SFQ and RSES was also statistically significant suggesting convergent validity. The correlation between the total score of VOTES with the total score of FBI is not statistically significant, implying good divergent validity. VOTES seems to be a promising tool to assess overall functioning of people with mental illness. © The Author(s) 2016.

Developing evaluation scales for horticultural therapy.

PubMed

Im, Eun-Ae; Park, Sin-Ae; Son, Ki-Cheol

2018-04-01

This study developed evaluation scales for measuring the effects of horticultural therapy in practical settings. Qualitative and quantitative research, including three preliminary studies and a main study, were conducted. In the first study, a total of 779 horticultural therapists answered an open-end questionnaire based on 58 items about elements of occupational therapy and seven factors about singularity of horticultural therapy. In the second study, 20 horticultural therapists participated in in-depth interviews. In the third study, a Delphi method was conducted with 24 horticultural therapists to build a model of assessment indexes and ensure the validity. In the final study, the reserve scales were tested by 121 horticultural therapists in their practical settings for 1045 clients, to verify their reliability and validity. Preliminary questions in the effects area of horticultural therapy were developed in the first study, and validity for the components in the second study. In the third study, an expert Delphi survey was conducted as part of content validity verification of the preliminary tool of horticultural therapy for physical, cognitive, psychological-emotional, and social areas. In the final study, the evaluation tool, which verified the construct, convergence, discriminant, and predictive validity and reliability test, was used to finalise the evaluation tool. The effects of horticultural therapy were classified as four different aspects, namely, physical, cognitive, psycho-emotional, and social, based on previous studies on the effects of horticultural therapy. 98 questions in the four aspects were selected as reserve scales. The reliability of each scale was calculated as 0.982 in physical, 0.980 in cognitive, 0.965 in psycho-emotional, and 0.972 in social aspects based on the Cronbach's test of intra-item internal consistency and half reliability of Spearman-Brown. This study was the first to demonstrate validity and reliability by simultaneously developing four measures of horticultural therapy effectiveness, namely, physical, cognitive, psychological-emotional, and social, both locally and externally. It is especially worthwhile in that it can be applied in common to people. Copyright © 2018 Elsevier Ltd. All rights reserved.

CODEMamb - an observational communication behavior assessment tool for use in ambulatory dementia care.

PubMed

Knebel, Maren; Haberstroh, Julia; Kümmel, Anne; Pantel, Johannes; Schröder, Johannes

2016-12-01

Communication improves well-being and quality of life for both people with dementia and their professional and family caregivers. Individualized communication, as required in informed consent procedures and psychosocial interventions, can improve quality of life, especially in ambulatory settings. However, few valid and reliable instruments exist that enable communication to be assessed and communication and behavioral resources to be identified. We, therefore, extended and adapted the newly developed observational instrument CODEM for use in ambulatory settings (CODEM amb ). Reliability and validity of the new instrument were studied in a total of 171 patients, whereby principal component analysis revealed three important factors: relationship aspects, verbal communication behavior and nonverbal communication behavior. CODEM amb [Formula: see text]s internal consistency, interrater and retest reliability were satisfactory to excellent. Convergent validity indices, as shown by examining correlations with similar but not identical constructs (CERAD-NP verbal subscales), were medium-high, while the divergent validity index (constructional praxis) was relatively low. The relationship to peer-rating remained nonsignificant. Criterion validity was investigated in groups of patients in accordance with their cognitive status. As expected, verbal communication abilities deteriorate faster than the relationship aspects of communication as the disease progresses. In summary, CODEM amb is a reliable and valid instrument that can be used to collect important information with the ultimate aim of supporting communication with people with dementia.

Development and testing of an assessment instrument for the formative peer review of significant event analyses.

PubMed

McKay, J; Murphy, D J; Bowie, P; Schmuck, M-L; Lough, M; Eva, K W

2007-04-01

To establish the content validity and specific aspects of reliability for an assessment instrument designed to provide formative feedback to general practitioners (GPs) on the quality of their written analysis of a significant event. Content validity was quantified by application of a content validity index. Reliability testing involved a nested design, with 5 cells, each containing 4 assessors, rating 20 unique significant event analysis (SEA) reports (10 each from experienced GPs and GPs in training) using the assessment instrument. The variance attributable to each identified variable in the study was established by analysis of variance. Generalisability theory was then used to investigate the instrument's ability to discriminate among SEA reports. Content validity was demonstrated with at least 8 of 10 experts endorsing all 10 items of the assessment instrument. The overall G coefficient for the instrument was moderate to good (G>0.70), indicating that the instrument can provide consistent information on the standard achieved by the SEA report. There was moderate inter-rater reliability (G>0.60) when four raters were used to judge the quality of the SEA. This study provides the first steps towards validating an instrument that can provide educational feedback to GPs on their analysis of significant events. The key area identified to improve instrument reliability is variation among peer assessors in their assessment of SEA reports. Further validity and reliability testing should be carried out to provide GPs, their appraisers and contractual bodies with a validated feedback instrument on this aspect of the general practice quality agenda.

Imparting Barely Visible Impact Damage to a Stitched Composite Large-Scale Pressure Box

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Przekop, Adam

2016-01-01

The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) is a concept that was developed by The Boeing Company to address the complex structural design aspects associated with a pressurized hybrid wing body (HWB) aircraft configuration, which has been a focus of the NASA Environmentally Responsible Aviation Project. The NASA-Boeing structural development for the HWB aircraft culminated in testing of the multi-bay box, which is an 80%-scale representation of the pressurized center-body section. This structure was tested in the NASA Langley Research Center Combined Loads Test System facility. As part of this testing, barely visible impact damage was imparted to the interior and exterior of the test article to demonstrate compliance with a condition representative of the requirements for Category 1 damaged composite structure as defined by the Federal Aviation Regulations. Interior impacts were imparted using an existing spring-loaded impactor, while the exterior impacts were imparted using a newly designed, gravity-driven impactor. This paper describes the impacts to the test article, and the design of the gravitydriven guided-weight impactor. The guided-weight impactor proved to be a very reliable method to impart barely visible impact damage in locations which are not easily accessible for a traditional drop-weight impactor, while at the same time having the capability to be highly configurable for use on other aircraft structures.

Membrane proteins structures: A review on computational modeling tools.

PubMed

Almeida, Jose G; Preto, Antonio J; Koukos, Panagiotis I; Bonvin, Alexandre M J J; Moreira, Irina S

2017-10-01

Membrane proteins (MPs) play diverse and important functions in living organisms. They constitute 20% to 30% of the known bacterial, archaean and eukaryotic organisms' genomes. In humans, their importance is emphasized as they represent 50% of all known drug targets. Nevertheless, experimental determination of their three-dimensional (3D) structure has proven to be both time consuming and rather expensive, which has led to the development of computational algorithms to complement the available experimental methods and provide valuable insights. This review highlights the importance of membrane proteins and how computational methods are capable of overcoming challenges associated with their experimental characterization. It covers various MP structural aspects, such as lipid interactions, allostery, and structure prediction, based on methods such as Molecular Dynamics (MD) and Machine-Learning (ML). Recent developments in algorithms, tools and hybrid approaches, together with the increase in both computational resources and the amount of available data have resulted in increasingly powerful and trustworthy approaches to model MPs. Even though MPs are elementary and important in nature, the determination of their 3D structure has proven to be a challenging endeavor. Computational methods provide a reliable alternative to experimental methods. In this review, we focus on computational techniques to determine the 3D structure of MP and characterize their binding interfaces. We also summarize the most relevant databases and software programs available for the study of MPs. Copyright © 2017 Elsevier B.V. All rights reserved.

An overview of engineering concepts and current design algorithms for probabilistic structural analysis

NASA Technical Reports Server (NTRS)

Duffy, S. F.; Hu, J.; Hopkins, D. A.

1995-01-01

The article begins by examining the fundamentals of traditional deterministic design philosophy. The initial section outlines the concepts of failure criteria and limit state functions two traditional notions that are embedded in deterministic design philosophy. This is followed by a discussion regarding safety factors (a possible limit state function) and the common utilization of statistical concepts in deterministic engineering design approaches. Next the fundamental aspects of a probabilistic failure analysis are explored and it is shown that deterministic design concepts mentioned in the initial portion of the article are embedded in probabilistic design methods. For components fabricated from ceramic materials (and other similarly brittle materials) the probabilistic design approach yields the widely used Weibull analysis after suitable assumptions are incorporated. The authors point out that Weibull analysis provides the rare instance where closed form solutions are available for a probabilistic failure analysis. Since numerical methods are usually required to evaluate component reliabilities, a section on Monte Carlo methods is included to introduce the concept. The article concludes with a presentation of the technical aspects that support the numerical method known as fast probability integration (FPI). This includes a discussion of the Hasofer-Lind and Rackwitz-Fiessler approximations.

Study on Distribution Reliability with Parallel and On-site Distributed Generation Considering Protection Miscoordination and Tie Line

NASA Astrophysics Data System (ADS)

Chaitusaney, Surachai; Yokoyama, Akihiko

In distribution system, Distributed Generation (DG) is expected to improve the system reliability as its backup generation. However, DG contribution in fault current may cause the loss of the existing protection coordination, e.g. recloser-fuse coordination and breaker-breaker coordination. This problem can drastically deteriorate the system reliability, and it is more serious and complicated when there are several DG sources in the system. Hence, the above conflict in reliability aspect unavoidably needs a detailed investigation before the installation or enhancement of DG is done. The model of composite DG fault current is proposed to find the threshold beyond which existing protection coordination is lost. Cases of protection miscoordination are described, together with their consequences. Since a distribution system may be tied with another system, the issues of tie line and on-site DG are integrated into this study. Reliability indices are evaluated and compared in the distribution reliability test system RBTS Bus 2.

A reliability analysis framework with Monte Carlo simulation for weld structure of crane's beam

NASA Astrophysics Data System (ADS)

Wang, Kefei; Xu, Hongwei; Qu, Fuzheng; Wang, Xin; Shi, Yanjun

2018-04-01

The reliability of the crane product in engineering is the core competitiveness of the product. This paper used Monte Carlo method analyzed the reliability of the weld metal structure of the bridge crane whose limit state function is mathematical expression. Then we obtained the minimum reliable welding feet height value for the welds between cover plate and web plate on main beam in different coefficients of variation. This paper provides a new idea and reference for the growth of the inherent reliability of crane.

Total systems design analysis of high performance structures

NASA Technical Reports Server (NTRS)

Verderaime, V.

1993-01-01

Designer-control parameters were identified at interdiscipline interfaces to optimize structural systems performance and downstream development and operations with reliability and least life-cycle cost. Interface tasks and iterations are tracked through a matrix of performance disciplines integration versus manufacturing, verification, and operations interactions for a total system design analysis. Performance integration tasks include shapes, sizes, environments, and materials. Integrity integrating tasks are reliability and recurring structural costs. Significant interface designer control parameters were noted as shapes, dimensions, probability range factors, and cost. Structural failure concept is presented, and first-order reliability and deterministic methods, benefits, and limitations are discussed. A deterministic reliability technique combining benefits of both is proposed for static structures which is also timely and economically verifiable. Though launch vehicle environments were primarily considered, the system design process is applicable to any surface system using its own unique filed environments.

Assessment of concrete damage and strength degradation caused by reinforcement corrosion

NASA Astrophysics Data System (ADS)

Nepal, Jaya; Chen, Hua-Peng

2015-07-01

Structural performance deterioration of reinforced concrete structures has been extensively investigated, but very limited studies have been carried out to investigate the effect of reinforcement corrosion on time-dependent reliability with consideration of the influence of mechanical characteristics of the bond interface due to corrosion. This paper deals with how corrosion in reinforcement creates different types of defects in concrete structure and how they are responsible for the structural capacity deterioration of corrosion affected reinforced concrete structures during their service life. Cracking in cover concrete due to reinforcement corrosion is investigated by using rebar-concrete model and realistic concrete properties. The flexural strength deterioration is analytically predicted on the basis of bond strength evolution due to reinforcement corrosion, which is examined by the experimental data available. The time-dependent reliability analysis is undertaken to calculate the life time structural reliability of corrosion damaged concrete structures by stochastic deterioration modelling of reinforced concrete. The results from the numerical example show that the proposed approach is capable of evaluating the damage caused by reinforcement corrosion and also predicting the structural reliability of concrete structures during their lifecycle.

Psychometric properties of the Posttraumatic Cognition Inventory within a Northern Ireland adolescent sample.

PubMed

Hyland, Philip; Murphy, Jamie; Shevlin, Mark; Murphy, Siobhan; Egan, Arlene; Boduszek, Daniel

2015-11-01

This study sought to investigate the psychometric properties of the Posttraumatic Cognitions Inventory (PTCI; Foa et al., 1999, Psychol. Assess., 11, 303) among a cohort of older adolescents and to determine the relationship between post-traumatic cognitions and a variety of psychological outcomes including depression, anxiety, stress, and loneliness. The PTCI was investigated among a large sample (N = 785) of Northern Irish adolescents. Confirmatory factor analysis and composite reliability analysis were conducted to assess the psychometric properties of the scale. The familiar three-factor solution of negative cognitions of self, negative cognitions of the world and others, and self-blame was supported; however, it was necessary to remove eight items from the original 33-item scale. The three-factor structure was subsequently demonstrated to be factorially invariant across gender and to possess satisfactory internal reliability. The three PTCI factors were found to correlate with depression, anxiety, stress, and three dimensions of loneliness. These results provide the first piece of evidence that older adolescents cognitively respond to trauma in a similar manner to adults, that the PTCI is factorially invariant between genders, and that trauma cognitions are correlated with feelings of loneliness. The contextual dependent nature of the structure of the PTCI factors is discussed in relation to future research efforts. The PTCI is a valid and reliable measure of trauma-related cognitions among adolescents and works equally well for male adolescents and female adolescents. Trauma cognitions are associated with a range of mental health problems beyond post-traumatic stress disorder including depression, anxiety, stress, and various aspects of loneliness. Reductions in trauma cognitions in survivors of trauma will have wide-scale clinical benefits to patient well-being. The exact structure and make-up of items in the PTCI may well be dependent on culture, context, and the nature of the trauma. The study is limited due to the fact that the authors could not assess the severity of the trauma experienced by the adolescent sample. © 2015 The British Psychological Society.

Searching for the elusive neural substrates of body part terms: a neuropsychological study.

PubMed

Kemmerer, David; Tranel, Daniel

2008-06-01

Previous neuropsychological studies suggest that, compared to other categories of concrete entities, lexical and conceptual aspects of body part knowledge are frequently spared in brain-damaged patients. To further investigate this issue, we administered a battery of 12 tests assessing lexical and conceptual aspects of body part knowledge to 104 brain-damaged patients with lesions distributed throughout the telencephalon. There were two main outcomes. First, impaired oral naming of body parts, attributable to a disturbance of the mapping between lexical-semantic and lexical-phonological structures, was most reliably and specifically associated with lesions in the left frontal opercular and anterior/inferior parietal opercular cortices and in the white matter underlying these regions (8 patients). Also, 1 patient with body part anomia had a left occipital lesion that included the "extrastriate body area" (EBA). Second, knowledge of the meanings of body part terms was remarkably resistant to impairment, regardless of lesion site; in fact, we did not uncover a single patient who exhibited significantly impaired understanding of the meanings of these terms. In the 9 patients with body part anomia, oral naming of concrete entities was evaluated, and this revealed that 4 patients had disproportionately worse naming of body parts relative to other types of concrete entities. Taken together, these findings extend previous neuropsychological and functional neuroimaging studies of body part knowledge and add to our growing understanding of the nuances of how different linguistic and conceptual categories are operated by left frontal and parietal structures.

Searching for the Elusive Neural Substrates of Body Part Terms: A Neuropsychological Study

PubMed Central

Kemmerer, David; Tranel, Daniel

2010-01-01

Previous neuropsychological studies suggest that, compared to other categories of concrete entities, lexical and conceptual aspects of body part knowledge are frequently spared in brain-damaged patients. To further investigate this issue, we administered a battery of 12 tests assessing lexical and conceptual aspects of body part knowledge to 104 brain-damaged patients with lesions distributed throughout the telencephalon. There were two main outcomes. First, impaired oral naming of body parts, attributable to a disturbance of the mapping between lexical-semantic and lexical-phonological structures, was most reliably and specifically associated with lesions in the left frontal opercular and anterior/inferior parietal opercular cortices, and in the white matter underlying these regions (8 patients). Also, one patient with body part anomia had a left occipital lesion that included the “extrastriate body area” (EBA). Second, knowledge of the meanings of body part terms was remarkably resistant to impairment, regardless of lesion site; in fact, we did not uncover a single patient who exhibited significantly impaired understanding of the meanings of these terms. In the 9 patients with body part anomia, oral naming of concrete entities was evaluated, and this revealed that 4 patients had disproportionately worse naming of body parts relative to other types of concrete entities. Taken together, these findings extend previous neuropsychological and functional neuroimaging studies of body part knowledge, and add to our growing understanding of the nuances of how different linguistic and conceptual categories are operated by left frontal and parietal structures. PMID:18608319

Individualization and quality improvement: two new scales to complement measurement of program fidelity.

PubMed

Bond, Gary R; Drake, Robert E; Rapp, Charles A; McHugo, Gregory J; Xie, Haiyi

2009-09-01

Fidelity scales have been widely used to assess program adherence to the principles of an evidence-based practice, but they do not measure important aspects of quality of care. Pragmatic scales measuring clinical quality of services are needed to complement fidelity scales measuring structural aspects of program implementation. As part of the instrumentation developed for the National Implementing Evidence-Based Practices Project, we piloted a new instrument with two 5-item quality scales, Individualization (a client-level quality scale) and Quality Improvement (an organizational-level quality scale). Pairs of independent fidelity assessors conducted fidelity reviews in 49 sites in 8 states at baseline and at four subsequent 6-month intervals over a 2-year follow-up period. The assessors followed a standardized protocol to administer these quality scales during daylong site visits; during these same visits they assessed programs on fidelity to the evidence-based practice that the site was seeking to implement. Assessors achieved acceptable interrater reliability for both Individualization and Quality Improvement. Principal components factor analysis confirmed the 2-scale structure. The two scales were modestly correlated with each other and with the evidence-based practice fidelity scales. Over the first year, Individualization and Quality Improvement improved, but showed little or no improvement during the last year of follow-up. The two newly developed scales showed adequate psychometric properties in this preliminary study, but further research is needed to assess their validity and utility in routine clinical practice.

Reliability-based design optimization of reinforced concrete structures including soil-structure interaction using a discrete gravitational search algorithm and a proposed metamodel

NASA Astrophysics Data System (ADS)

Khatibinia, M.; Salajegheh, E.; Salajegheh, J.; Fadaee, M. J.

2013-10-01

A new discrete gravitational search algorithm (DGSA) and a metamodelling framework are introduced for reliability-based design optimization (RBDO) of reinforced concrete structures. The RBDO of structures with soil-structure interaction (SSI) effects is investigated in accordance with performance-based design. The proposed DGSA is based on the standard gravitational search algorithm (GSA) to optimize the structural cost under deterministic and probabilistic constraints. The Monte-Carlo simulation (MCS) method is considered as the most reliable method for estimating the probabilities of reliability. In order to reduce the computational time of MCS, the proposed metamodelling framework is employed to predict the responses of the SSI system in the RBDO procedure. The metamodel consists of a weighted least squares support vector machine (WLS-SVM) and a wavelet kernel function, which is called WWLS-SVM. Numerical results demonstrate the efficiency and computational advantages of DGSA and the proposed metamodel for RBDO of reinforced concrete structures.

The patient dignity inventory: a novel way of measuring dignity-related distress in palliative care.

PubMed

Chochinov, Harvey Max; Hassard, Thomas; McClement, Susan; Hack, Thomas; Kristjanson, Linda J; Harlos, Mike; Sinclair, Shane; Murray, Alison

2008-12-01

Quality palliative care depends on a deep understanding of distress facing patients nearing death. Yet, many aspects of psychosocial, existential and spiritual distress are often overlooked. The aim of this study was to test a novel psychometric--the Patient Dignity Inventory (PDI)--designed to measure various sources of dignity-related distress among patients nearing the end of life. Using standard instrument development techniques, this study examined the face validity, internal consistency, test-retest reliability, factor structure and concurrent validity of the PDI. The 25-items of the PDI derive from a model of dignity in the terminally ill. To establish its basic psychometric properties, the PDI was administered to 253 patients receiving palliative care, along with other measures addressing issues identified within the Dignity Model in the Terminally Ill. Cronbach's coefficient alpha for the PDI was 0.93; the test-retest reliability was r = 0.85. Factor analysis resulted in a five-factor solution; factor labels include Symptom Distress, Existential Distress, Dependency, Peace of Mind, and Social Support, accounting for 58% of the overall variance. Evidence for concurrent validity was reported by way of significant associations between PDI factors and concurrent measures of distress. The PDI is a valid and reliable new instrument, which could assist clinicians to routinely detect end-of-life dignity-related distress. Identifying these sources of distress is a critical step toward understanding human suffering and should help clinicians deliver quality, dignity-conserving end-of-life care.

Some Aspects of the Failure Mechanisms in BaTiO3-Based Multilayer Ceramic Capacitors

NASA Technical Reports Server (NTRS)

Liu, David Donhang; Sampson, Michael J.

2012-01-01

The objective of this presentation is to gain insight into possible failure mechanisms in BaTiO3-based ceramic capacitors that may be associated with the reliability degradation that accompanies a reduction in dielectric thickness, as reported by Intel Corporation in 2010. The volumetric efficiency (microF/cm3) of a multilayer ceramic capacitor (MLCC) has been shown to not increase limitlessly due to the grain size effect on the dielectric constant of ferroelectric ceramic BaTiO3 material. The reliability of an MLCC has been discussed with respect to its structure. The MLCCs with higher numbers of dielectric layers will pose more challenges for the reliability of dielectric material, which is the case for most base-metal-electrode (BME) capacitors. A number of MLCCs manufactured using both precious-metal-electrode (PME) and BME technology, with 25 V rating and various chip sizes and capacitances, were tested at accelerated stress levels. Most of these MLCCs had a failure behavior with two mixed failure modes: the well-known rapid dielectric wearout, and so-called 'early failures." The two failure modes can be distinguished when the testing data were presented and normalized at use-level using a 2-parameter Weibull plot. The early failures had a slope parameter of Beta >1, indicating that the early failures are not infant mortalities. Early failures are triggered due to external electrical overstress and become dominant as dielectric layer thickness decreases, accompanied by a dramatic reduction in reliability. This indicates that early failures are the main cause of the reliability degradation in MLCCs as dielectric layer thickness decreases. All of the early failures are characterized by an avalanche-like breakdown leakage current. The failures have been attributed to the extrinsic minor construction defects introduced during fabrication of the capacitors. A reliability model including dielectric thickness and extrinsic defect feature size is proposed in this presentation. The model can be used to explain the Intel-reported reliability degradation in MLCCs with respect to the reduction of dielectric thickness. It can also be used to estimate the reliability of a MLCC based on its construction and microstructure parameters such as dielectric thickness, average grain size, and number of dielectric layers. Measures for preventing early failures are also discussed in this document.

LDRD Project 52523 final report :Atomic layer deposition of highly conformal tribological coatings.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jungk, John Michael; Dugger, Michael Thomas; George, Steve M.

2005-10-01

Friction and wear are major concerns in the performance and reliability of micromechanical (MEMS) devices. While a variety of lubricant and wear resistant coatings are known which we might consider for application to MEMS devices, the severe geometric constraints of many micromechanical systems (high aspect ratios, shadowed surfaces) make most deposition methods for friction and wear-resistance coatings impossible. In this program we have produced and evaluate highly conformal, tribological coatings, deposited by atomic layer deposition (ALD), for use on surface micromachined (SMM) and LIGA structures. ALD is a chemical vapor deposition process using sequential exposure of reagents and self-limiting surfacemore » chemistry, saturating at a maximum of one monolayer per exposure cycle. The self-limiting chemistry results in conformal coating of high aspect ratio structures, with monolayer precision. ALD of a wide variety of materials is possible, but there have been no studies of structural, mechanical, and tribological properties of these films. We have developed processes for depositing thin (<100 nm) conformal coatings of selected hard and lubricious films (Al2O3, ZnO, WS2, W, and W/Al{sub 2}O{sub 3} nanolaminates), and measured their chemical, physical, mechanical and tribological properties. A significant challenge in this program was to develop instrumentation and quantitative test procedures, which did not exist, for friction, wear, film/substrate adhesion, elastic properties, stress, etc., of extremely thin films and nanolaminates. New scanning probe and nanoindentation techniques have been employed along with detailed mechanics-based models to evaluate these properties at small loads characteristic of microsystem operation. We emphasize deposition processes and fundamental properties of ALD materials, however we have also evaluated applications and film performance for model SMM and LIGA devices.« less

Social anxiety in the general population: introducing abbreviated versions of SIAS and SPS.

PubMed

Kupper, Nina; Denollet, Johan

2012-01-01

Social anxiety is characterized by the experience of stress, discomfort and fear in social situations, and is associated with substantial personal and societal burden. Two questionnaires exist that assess the aspects of social anxiety, i.e. social interaction anxiety (SIAS) and social phobia (SPS). There is no agreement in literature on the dimensionality of social anxiety. Further, the length of a questionnaire may negatively affect response rates and participation at follow-up occasions. To explore the structure of social anxiety in the general population, and to examine psychosocial and sociodemographic correlates. Our second aim was to construct abbreviated versions of SIAS and SPS that can be easily used and with minimal burden. A total of 1598 adults from the general Dutch population completed a survey asking information on social anxiety, mood and demographics. Exploratory and confirmatory factor analyses as well as reliability analysis with item-total statistics were performed. Confirmatory factor analysis revealed a 3-factor structure for social phobia, and a 2-factor structure for the SIAS, with the second factor containing both reversely scored items. The abbreviated versions of SPS (11 items) and SIAS (10 items) show excellent discriminant and construct validity (Cronbach's α=.90 and .92), while specificity analysis showed that gender, marital status and educational level (SIAS(10): p<.0005; SPS(11): p<.0005) are important determinants of social anxiety. In the general population, social interaction anxiety and social phobia are two aspects of a higher-order factor of social anxiety. Social anxiety is validly captured by the short versions of SPS and SIAS, reducing the questionnaire burden for participants in epidemiological and biobehavioral research. Copyright © 2011 Elsevier B.V. All rights reserved.

A Note on Structural Equation Modeling Estimates of Reliability

ERIC Educational Resources Information Center

Yang, Yanyun; Green, Samuel B.

2010-01-01

Reliability can be estimated using structural equation modeling (SEM). Two potential problems with this approach are that estimates may be unstable with small sample sizes and biased with misspecified models. A Monte Carlo study was conducted to investigate the quality of SEM estimates of reliability by themselves and relative to coefficient…

Reliability in perceptual analysis of voice quality.

PubMed

Bele, Irene Velsvik

2005-12-01

This study focuses on speaking voice quality in male teachers (n = 35) and male actors (n = 36), who represent untrained and trained voice users, because we wanted to investigate normal and supranormal voices. In this study, both substantial and methodologic aspects were considered. It includes a method for perceptual voice evaluation, and a basic issue was rater reliability. A listening group of 10 listeners, 7 experienced speech-language therapists, and 3 speech-language therapist students evaluated the voices by 15 vocal characteristics using VA scales. Two sets of voice signals were investigated: text reading (2 loudness levels) and sustained vowel (3 levels). The results indicated a high interrater reliability for most perceptual characteristics. Connected speech was evaluated more reliably, especially at the normal level, but both types of voice signals were evaluated reliably, although the reliability for connected speech was somewhat higher than for vowels. Experienced listeners tended to be more consistent in their ratings than did the student raters. Some vocal characteristics achieved acceptable reliability even with a smaller panel of listeners. The perceptual characteristics grouped in 4 factors reflected perceptual dimensions.

Estimating spatial travel times using automatic vehicle identification data

DOT National Transportation Integrated Search

2001-01-01

Prepared ca. 2001. The paper describes an algorithm that was developed for estimating reliable and accurate average roadway link travel times using Automatic Vehicle Identification (AVI) data. The algorithm presented is unique in two aspects. First, ...

Joint System Prognostics For Increased Efficiency And Risk Mitigation In Advanced Nuclear Reactor Instrumentation and Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donald D. Dudenhoeffer; Tuan Q. Tran; Ronald L. Boring

2006-08-01

The science of prognostics is analogous to a doctor who, based on a set of symptoms and patient tests, assesses a probable cause, the risk to the patient, and a course of action for recovery. While traditional prognostics research has focused on the aspect of hydraulic and mechanical systems and associated failures, this project will take a joint view in focusing not only on the digital I&C aspect of reliability and risk, but also on the risks associated with the human element. Model development will not only include an approximation of the control system physical degradation but also on humanmore » performance degradation. Thus the goal of the prognostic system is to evaluate control room operation; to identify and potentially take action when performance degradation reduces plant efficiency, reliability or safety.« less

Measuring patients' experiences with rheumatic care: the consumer quality index rheumatoid arthritis.

PubMed

Zuidgeest, Marloes; Sixma, Herman; Rademakers, Jany

2009-12-01

Rheumatologists and other caregivers can learn from patients’ experiences with the quality of care that can be measured with the CQ-index Rheumatoid Arthritis (CQ-index RA) survey. Patients with RA (n = 590) received this survey were they rated their actual experiences and what they find important in rheumatic healthcare. Descriptive analyses and psychometric methods were used to test the reliability. The response rate was 69%. The items in the pilot instrument could be grouped into 10 scales (α ranged from 0.77 to 0.94). The most important quality aspects according to patients concerned the alertness when prescribing medication. Providing patients with information on a special website of the hospital about RA was the highest quality improvement aspect. The results of this study show that the CQ-index RA is a reliable instrument for quality assessment from the patients’ perspective. The instrument provides rheumatologists and other caregivers with feedback for service improvement initiatives.

Measures of shoulder protraction and thoracolumbar rotation.

PubMed

Schenkman, M; Laub, K C; Kuchibhatla, M; Ray, L; Shinberg, M

1997-05-01

Physical therapists need objective measures that can be used reliably with a variety of subject groups to document upper quadrant function. Two aspects of upper quadrant motion, shoulder protraction and thoracolumbar rotation, are assessed routinely in clinical practice, but no standard measurement techniques have been reported. We hypothesized that there would be significant differences, by age and state of health, for both shoulder protraction and thoracolumbar rotation. The purposes of this study were: 1) to develop measurement approaches for shoulder protraction and thoracolumbar rotation; 2) to determine if there are significant differences in these motions for four subject groups: healthy young, healthy elders, functionally limited elders, and people with Parkinson's disease; and 3) to describe between-rater and within-rater reliability for these measures. Fifty-five subjects participated in this investigation. All subjects were rated by a physical therapist and two research assistants. Using an analysis of variance followed by Scheffe's post hoc analysis, significant differences were demonstrated between the groups. Between-rater and within-rater reliability ranged from ICCs of 0.54 to 0.95. Clinicians can use these measures to quantify aspects of upper quadrant function treated routinely in physical therapy practice. These measures also have applicability for researchers.

Patient's Perspective on Quality of Teleconsultation Services.

PubMed

Thijssing, Leonie; Tensen, Esmée; Jaspers, Monique

2016-01-01

Patient satisfaction with teleconsultation services can increase their acceptance. Validated and standardized questionnaires to measure the quality aspects of teleconsultation relevant from the patients' perspective are not available yet. We aim to develop such a questionnaire. First, a systematic literature search was performed and focus groups were held to acquire quality aspects of teleconsultations patients perceive as important. Thirty-seven unique quality aspects distilled from these activities, were used for questionnaire development based on the framework of the Consumer Quality Index. In future research, the comprehensiveness, relevance and unambiguousness of the concept questionnaire need to be tested and the reliability and internal cohesion of the questionnaire assessed.

Design of high reliability organizations in health care

PubMed Central

Carroll, J S; Rudolph, J W

2006-01-01

To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self‐understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self‐design for safety and reliability. PMID:17142607

An interval model updating strategy using interval response surface models

NASA Astrophysics Data System (ADS)

Fang, Sheng-En; Zhang, Qiu-Hu; Ren, Wei-Xin

2015-08-01

Stochastic model updating provides an effective way of handling uncertainties existing in real-world structures. In general, probabilistic theories, fuzzy mathematics or interval analyses are involved in the solution of inverse problems. However in practice, probability distributions or membership functions of structural parameters are often unavailable due to insufficient information of a structure. At this moment an interval model updating procedure shows its superiority in the aspect of problem simplification since only the upper and lower bounds of parameters and responses are sought. To this end, this study develops a new concept of interval response surface models for the purpose of efficiently implementing the interval model updating procedure. The frequent interval overestimation due to the use of interval arithmetic can be maximally avoided leading to accurate estimation of parameter intervals. Meanwhile, the establishment of an interval inverse problem is highly simplified, accompanied by a saving of computational costs. By this means a relatively simple and cost-efficient interval updating process can be achieved. Lastly, the feasibility and reliability of the developed method have been verified against a numerical mass-spring system and also against a set of experimentally tested steel plates.

Applications of a damage tolerance analysis methodology in aircraft design and production

NASA Technical Reports Server (NTRS)

Woodward, M. R.; Owens, S. D.; Law, G. E.; Mignery, L. A.

1992-01-01

Objectives of customer mandated aircraft structural integrity initiatives in design are to guide material selection, to incorporate fracture resistant concepts in the design, to utilize damage tolerance based allowables and planned inspection procedures necessary to enhance the safety and reliability of manned flight vehicles. However, validated fracture analysis tools for composite structures are needed to accomplish these objectives in a timely and economical manner. This paper briefly describes the development, validation, and application of a damage tolerance methodology for composite airframe structures. A closed-form analysis code, entitled SUBLAM was developed to predict the critical biaxial strain state necessary to cause sublaminate buckling-induced delamination extension in an impact damaged composite laminate. An embedded elliptical delamination separating a thin sublaminate from a thick parent laminate is modelled. Predicted failure strains were correlated against a variety of experimental data that included results from compression after impact coupon and element tests. An integrated analysis package was developed to predict damage tolerance based margin-of-safety (MS) using NASTRAN generated loads and element information. Damage tolerance aspects of new concepts are quickly and cost-effectively determined without the need for excessive testing.

Psychometric evaluation of a coping questionnaire in two independent samples of people with diabetes.

PubMed

Persson, Lars-Olof; Erichsen, Magdalena; Wändell, Per; Gåfvels, Catharina

2013-10-01

The study examines internal item/scale structure and concurrent validity of a newly developed 48-item questionnaire [General Coping Questionnaire (GCQ)] that measures 10 aspects of coping with chronic illness (self-trust, problem-reducing actions, change of values, social trust, minimization, fatalism, resignation, protest, isolation and intrusion). The tests were performed in two independent samples of persons with diabetes mellitus. The first sample consisted of 119 subjects with type I diabetes and the second sample of 184 subjects with type II diabetes. Concurrent validity was examined by comparisons with measures of health-related quality of life (SF-36), a measure of metabolic control (HbA1c) and incidence of diabetic complications. The item/scale structure was found to be similar and very good in both samples. The 10 dimensions correlated as expected with the measure of mental health, although the 'negative' dimensions of the GCQ correlated higher compared with the 'positive' dimensions. Weaker relations with metabolic control were also found in one of the samples. These tests provide further evidence that GCQ is a well-structured, relevant and reliable instrument for assessing coping reactions in chronic somatic conditions. Copyright © 2012 John Wiley & Sons, Ltd.

The structure of social exchange in self-help support groups: development of a measure.

PubMed

Brown, Louis D; Tang, Xiaohui; Hollman, Ruth L

2014-03-01

Self-help support groups are indigenous community resources designed to help people manage a variety of personal challenges, from alcohol abuse to xeroderma pigmentosum. The social exchanges that occur during group meetings are central to understanding how people benefit from participation. This paper examines the different types of social exchange behaviors that occur during meetings, using two studies to develop empirically distinct scales that reliably measure theoretically important types of exchange. Resource theory informed the initial measurement development efforts. Exploratory factor analyses from the first study led to revisions in the factor structure of the social exchange scales. The revised measure captured the exchange of emotional support, experiential information, humor, unwanted behaviors, and exchanges outside meetings. Confirmatory factor analyses from a follow-up study with a different sample of self-help support groups provided good model fit, suggesting the revised structure accurately represented the data. Further, the scales demonstrated good convergent and discriminant validity with related constructs. Future research can use the scales to identify aspects of social exchange that are most important in improving health outcomes among self-help support group participants. Groups can use the scales in practice to celebrate strengths and address weaknesses in their social exchange dynamics.

Full-scale laboratory validation of a wireless MEMS-based technology for damage assessment of concrete structures

NASA Astrophysics Data System (ADS)

Trapani, Davide; Zonta, Daniele; Molinari, Marco; Amditis, Angelos; Bimpas, Matthaios; Bertsch, Nicolas; Spiering, Vincent; Santana, Juan; Sterken, Tom; Torfs, Tom; Bairaktaris, Dimitris; Bairaktaris, Manos; Camarinopulos, Stefanos; Frondistou-Yannas, Mata; Ulieru, Dumitru

2012-04-01

This paper illustrates an experimental campaign conducted under laboratory conditions on a full-scale reinforced concrete three-dimensional frame instrumented with wireless sensors developed within the Memscon project. In particular it describes the assumptions which the experimental campaign was based on, the design of the structure, the laboratory setup and the results of the tests. The aim of the campaign was to validate the performance of Memscon sensing systems, consisting of wireless accelerometers and strain sensors, on a real concrete structure during construction and under an actual earthquake. Another aspect of interest was to assess the effectiveness of the full damage recognition procedure based on the data recorded by the sensors and the reliability of the Decision Support System (DSS) developed in order to provide the stakeholders recommendations for building rehabilitation and the costs of this. With these ends, a Eurocode 8 spectrum-compatible accelerogram with increasing amplitude was applied at the top of an instrumented concrete frame built in the laboratory. MEMSCON sensors were directly compared with wired instruments, based on devices available on the market and taken as references, during both construction and seismic simulation.

Results of a Demonstration Assessment of Passive System Reliability Utilizing the Reliability Method for Passive Systems (RMPS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bucknor, Matthew; Grabaskas, David; Brunett, Acacia

2015-04-26

Advanced small modular reactor designs include many advantageous design features such as passively driven safety systems that are arguably more reliable and cost effective relative to conventional active systems. Despite their attractiveness, a reliability assessment of passive systems can be difficult using conventional reliability methods due to the nature of passive systems. Simple deviations in boundary conditions can induce functional failures in a passive system, and intermediate or unexpected operating modes can also occur. As part of an ongoing project, Argonne National Laboratory is investigating various methodologies to address passive system reliability. The Reliability Method for Passive Systems (RMPS), amore » systematic approach for examining reliability, is one technique chosen for this analysis. This methodology is combined with the Risk-Informed Safety Margin Characterization (RISMC) approach to assess the reliability of a passive system and the impact of its associated uncertainties. For this demonstration problem, an integrated plant model of an advanced small modular pool-type sodium fast reactor with a passive reactor cavity cooling system is subjected to a station blackout using RELAP5-3D. This paper discusses important aspects of the reliability assessment, including deployment of the methodology, the uncertainty identification and quantification process, and identification of key risk metrics.« less

Recent developments of the NESSUS probabilistic structural analysis computer program

NASA Technical Reports Server (NTRS)

Millwater, H.; Wu, Y.-T.; Torng, T.; Thacker, B.; Riha, D.; Leung, C. P.

1992-01-01

The NESSUS probabilistic structural analysis computer program combines state-of-the-art probabilistic algorithms with general purpose structural analysis methods to compute the probabilistic response and the reliability of engineering structures. Uncertainty in loading, material properties, geometry, boundary conditions and initial conditions can be simulated. The structural analysis methods include nonlinear finite element and boundary element methods. Several probabilistic algorithms are available such as the advanced mean value method and the adaptive importance sampling method. The scope of the code has recently been expanded to include probabilistic life and fatigue prediction of structures in terms of component and system reliability and risk analysis of structures considering cost of failure. The code is currently being extended to structural reliability considering progressive crack propagation. Several examples are presented to demonstrate the new capabilities.

Fatigue assessment for selected connections of structural steel bridge components using the finite elements method

NASA Astrophysics Data System (ADS)

Śledziewski, Krzysztof

2018-01-01

Material fatigue it is one of the most frequent causes of steel bridge failures, particularly the bridges already existing. Thus, the procedure of fatigue life assessment is one of the most relevant procedures in a comprehensive assessment of load-carrying capacity and service life of the structure. A reliable assessment of the fatigue life is predominantly decisive for estimation of the remaining service life. Hitherto, calculation methods of welded joints took into account only stresses occurring in cross sections of whole elements and did not take into account stress concentration occurring in the vicinity of the weld, caused by geometrical aspects of the detail. At present, use of the Finite Element Analysis, makes possible looking for more accurate approach to the fatigue design of steel structures. The method of geometrical stresses is just such approach which is based on definition of stresses which take into account geometry of the detail. The study presents fatigue assessment of a representative type of welded joint in welded bridge structures. The testing covered longitudinal attachments. The main analyses were carried out on the basis of FEM and the method of local stresses, so-called "hot-spot" stresses. The obtained values of stresses were compared with the values obtained in accordance with the method of nominal stress.

Correlation of cervical endplate strength with CT measured subchondral bone density

PubMed Central

Ordway, Nathaniel R.; Lu, Yen-Mou; Zhang, Xingkai; Cheng, Chin-Chang; Fang, Huang

2007-01-01

Cervical interbody device subsidence can result in screw breakage, plate dislodgement, and/or kyphosis. Preoperative bone density measurement may be helpful in predicting the complications associated with anterior cervical surgery. This is especially important when a motion preserving device is implanted given the detrimental effect of subsidence on the postoperative segmental motion following disc replacement. To evaluate the structural properties of the cervical endplate and examine the correlation with CT measured trabecular bone density. Eight fresh human cadaver cervical spines (C2–T1) were CT scanned and the average trabecular bone densities of the vertebral bodies (C3–C7) were measured. Each endplate surface was biomechanically tested for regional yield load and stiffness using an indentation test method. Overall average density of the cervical vertebral body trabecular bone was 270 ± 74 mg/cm3. There was no significant difference between levels. The yield load and stiffness from the indentation test of the endplate averaged 139 ± 99 N and 156 ± 52 N/mm across all cervical levels, endplate surfaces, and regional locations. The posterior aspect of the endplate had significantly higher yield load and stiffness in comparison to the anterior aspect and the lateral aspect had significantly higher yield load in comparison to the midline aspect. There was a significant correlation between the average yield load and stiffness of the cervical endplate and the trabecular bone density on regression analysis. Although there are significant regional variations in the endplate structural properties, the average of the endplate yield loads and stiffnesses correlated with the trabecular bone density. Given the morbidity associated with subsidence of interbody devices, a reliable and predictive method of measuring endplate strength in the cervical spine is required. Bone density measures may be used preoperatively to assist in the prediction of the strength of the vertebral endplate. A threshold density measure has yet to be established where the probability of endplate fracture outweighs the benefit of anterior cervical procedure. PMID:17712574

Oak Ridge Leadership Computing Facility Position Paper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oral, H Sarp; Hill, Jason J; Thach, Kevin G

This paper discusses the business, administration, reliability, and usability aspects of storage systems at the Oak Ridge Leadership Computing Facility (OLCF). The OLCF has developed key competencies in architecting and administration of large-scale Lustre deployments as well as HPSS archival systems. Additionally as these systems are architected, deployed, and expanded over time reliability and availability factors are a primary driver. This paper focuses on the implementation of the Spider parallel Lustre file system as well as the implementation of the HPSS archive at the OLCF.

Fatigue reliability of deck structures subjected to correlated crack growth

NASA Astrophysics Data System (ADS)

Feng, G. Q.; Garbatov, Y.; Guedes Soares, C.

2013-12-01

The objective of this work is to analyse fatigue reliability of deck structures subjected to correlated crack growth. The stress intensity factors of the correlated cracks are obtained by finite element analysis and based on which the geometry correction functions are derived. The Monte Carlo simulations are applied to predict the statistical descriptors of correlated cracks based on the Paris-Erdogan equation. A probabilistic model of crack growth as a function of time is used to analyse the fatigue reliability of deck structures accounting for the crack propagation correlation. A deck structure is modelled as a series system of stiffened panels, where a stiffened panel is regarded as a parallel system composed of plates and are longitudinal. It has been proven that the method developed here can be conveniently applied to perform the fatigue reliability assessment of structures subjected to correlated crack growth.

Orthotopic Patient-Derived Pancreatic Cancer Xenografts Engraft Into the Pancreatic Parenchyma, Metastasize, and Induce Muscle Wasting to Recapitulate the Human Disease.

PubMed

Go, Kristina L; Delitto, Daniel; Judge, Sarah M; Gerber, Michael H; George, Thomas J; Behrns, Kevin E; Hughes, Steven J; Judge, Andrew R; Trevino, Jose G

2017-07-01

Limitations associated with current animal models serve as a major obstacle to reliable preclinical evaluation of therapies in pancreatic cancer (PC). In an effort to develop more reliable preclinical models, we have recently established a subcutaneous patient-derived xenograft (PDX) model. However, critical aspects of PC responsible for its highly lethal nature, such as the development of distant metastasis and cancer cachexia, remain underrepresented in the flank PDX model. The purpose of this study was to evaluate the degree to which an orthotopic PDX model of PC recapitulates these aspects of the human disease. Human PDX-derived PC tumors were implanted directly into the pancreas of NOD.Cg-Prkdc Il2rg/SzJ mice. Tumor growth, metastasis, and muscle wasting were then evaluated. Orthotopically implanted PDX-derived tumors consistently incorporated into the murine pancreatic parenchyma, metastasized to both the liver and lungs and induced muscle wasting directly proportional to the size of the tumor, consistent of the cancer cachexia syndrome. Through the orthotopic implantation technique described, we demonstrate a highly reproducible model that recapitulates both local and systemic aspects of human PC.

Reliability of Summed Item Scores Using Structural Equation Modeling: An Alternative to Coefficient Alpha

ERIC Educational Resources Information Center

Green, Samuel B.; Yang, Yanyun

2009-01-01

A method is presented for estimating reliability using structural equation modeling (SEM) that allows for nonlinearity between factors and item scores. Assuming the focus is on consistency of summed item scores, this method for estimating reliability is preferred to those based on linear SEM models and to the most commonly reported estimate of…

Interval Estimation of Revision Effect on Scale Reliability via Covariance Structure Modeling

ERIC Educational Resources Information Center

Raykov, Tenko

2009-01-01

A didactic discussion of a procedure for interval estimation of change in scale reliability due to revision is provided, which is developed within the framework of covariance structure modeling. The method yields ranges of plausible values for the population gain or loss in reliability of unidimensional composites, which results from deletion or…

A Bayesian-Based EDA Tool for Nano-circuits Reliability Calculations

NASA Astrophysics Data System (ADS)

Ibrahim, Walid; Beiu, Valeriu

As the sizes of (nano-)devices are aggressively scaled deep into the nanometer range, the design and manufacturing of future (nano-)circuits will become extremely complex and inevitably will introduce more defects while their functioning will be adversely affected by transient faults. Therefore, accurately calculating the reliability of future designs will become a very important aspect for (nano-)circuit designers as they investigate several design alternatives to optimize the trade-offs between the conflicting metrics of area-power-energy-delay versus reliability. This paper introduces a novel generic technique for the accurate calculation of the reliability of future nano-circuits. Our aim is to provide both educational and research institutions (as well as the semiconductor industry at a later stage) with an accurate and easy to use tool for closely comparing the reliability of different design alternatives, and for being able to easily select the design that best fits a set of given (design) constraints. Moreover, the reliability model generated by the tool should empower designers with the unique opportunity of understanding the influence individual gates play on the design’s overall reliability, and identifying those (few) gates which impact the design’s reliability most significantly.

Reliability modeling of fault-tolerant computer based systems

NASA Technical Reports Server (NTRS)

Bavuso, Salvatore J.

1987-01-01

Digital fault-tolerant computer-based systems have become commonplace in military and commercial avionics. These systems hold the promise of increased availability, reliability, and maintainability over conventional analog-based systems through the application of replicated digital computers arranged in fault-tolerant configurations. Three tightly coupled factors of paramount importance, ultimately determining the viability of these systems, are reliability, safety, and profitability. Reliability, the major driver affects virtually every aspect of design, packaging, and field operations, and eventually produces profit for commercial applications or increased national security. However, the utilization of digital computer systems makes the task of producing credible reliability assessment a formidable one for the reliability engineer. The root of the problem lies in the digital computer's unique adaptability to changing requirements, computational power, and ability to test itself efficiently. Addressed here are the nuances of modeling the reliability of systems with large state sizes, in the Markov sense, which result from systems based on replicated redundant hardware and to discuss the modeling of factors which can reduce reliability without concomitant depletion of hardware. Advanced fault-handling models are described and methods of acquiring and measuring parameters for these models are delineated.

Computational methods for efficient structural reliability and reliability sensitivity analysis

NASA Technical Reports Server (NTRS)

Wu, Y.-T.

1993-01-01

This paper presents recent developments in efficient structural reliability analysis methods. The paper proposes an efficient, adaptive importance sampling (AIS) method that can be used to compute reliability and reliability sensitivities. The AIS approach uses a sampling density that is proportional to the joint PDF of the random variables. Starting from an initial approximate failure domain, sampling proceeds adaptively and incrementally with the goal of reaching a sampling domain that is slightly greater than the failure domain to minimize over-sampling in the safe region. Several reliability sensitivity coefficients are proposed that can be computed directly and easily from the above AIS-based failure points. These probability sensitivities can be used for identifying key random variables and for adjusting design to achieve reliability-based objectives. The proposed AIS methodology is demonstrated using a turbine blade reliability analysis problem.

Fabrication method to create high-aspect ratio pillars for photonic coupling of board level interconnects

NASA Astrophysics Data System (ADS)

Debaes, C.; Van Erps, J.; Karppinen, M.; Hiltunen, J.; Suyal, H.; Last, A.; Lee, M. G.; Karioja, P.; Taghizadeh, M.; Mohr, J.; Thienpont, H.; Glebov, A. L.

2008-04-01

An important challenge that remains to date in board level optical interconnects is the coupling between the optical waveguides on printed wiring boards and the packaged optoelectronics chips, which are preferably surface mountable on the boards. One possible solution is the use of Ball Grid Array (BGA) packages. This approach offers a reliable attachment despite the large CTE mismatch between the organic FR4 board and the semiconductor materials. Collimation via micro-lenses is here typically deployed to couple the light vertically from the waveguide substrate to the optoelectronics while allowing for a small misalignment between board and package. In this work, we explore the fabrication issues of an alternative approach in which the vertical photonic connection between board and package is governed by a micro-optical pillar which is attached both to the board substrate and to the optoelectronic chips. Such an approach allows for high density connections and small, high-speed detector footprints while maintaining an acceptable tolerance between board and package. The pillar should exhibit some flexibility and thus a high-aspect ratio is preferred. This work presents and compares different fabrication methods and applies different materials for such high-aspect ratio pillars. The different fabrication methods are: photolithography, direct laser writing and deep proton writing. The selection of optical materials that was investigated is: SU8, Ormocers, PU and a multifunctional acrylate polymer. The resulting optical pillars have diameters ranging from 20um up to 80um, with total heights ranging between 30um and 100um (symbol for micron). The aspect-ratio of the fabricated structures ranges from 1.5 to 5.

Measurement tools and outcome measures used in transitional patient safety; a systematic review.

PubMed

van Melle, Marije A; van Stel, Henk F; Poldervaart, Judith M; de Wit, Niek J; Zwart, Dorien L M

2018-01-01

Patients are at risk for harm when treated simultaneously by healthcare providers from different healthcare organisations. To assess current practice and improvements of transitional patient safety, valid measurement tools are needed. To identify and appraise all measurement tools and outcomes that measure aspects of transitional patient safety, PubMed, Cinahl, Embase and Psychinfo were systematically searched. Two researchers performed the title and abstract and full-text selection. First, publications about validation of measurement tools were appraised for quality following COSMIN criteria. Second, we inventoried all measurement tools and outcome measures found in our search that assessed current transitional patient safety or the effect of interventions targeting transitional patient safety. The initial search yielded 8288 studies, of which 18 assessed validity of measurement tools of different aspects of transitional safety, and 191 assessed current transitional patient safety or effect of interventions. In the validated measurement tools, the overall quality of content and structural validity was acceptable; other COSMIN criteria, such as reliability, measurement error and responsiveness, were mostly poor or not reported. In our outcome inventory, the most frequently used validated outcome measure was the Care Transition Measure (n = 9). The most frequently used non-validated outcome measures were: medication discrepancies (n = 98), hospital readmissions (n = 55), adverse events (n = 34), emergency department visits (n = 33), (mental or physical) health status (n = 28), quality and timeliness of discharge summary, and patient satisfaction (n = 23). Although no validated measures exist that assess all aspects of transitional patient safety, we found validated measurement tools on specific aspects. Reporting of validity of transitional measurement tools was incomplete. Numerous outcome measures with unknown measurement properties are used in current studies on safety of care transitions, which makes interpretation or comparison of their results uncertain.

Aircraft Photovoltaic Power-Generating System.

NASA Astrophysics Data System (ADS)

Doellner, Oscar Leonard

Photovoltaic cells, appropriately cooled and operating in the combustion-created high radiant-intensity environment of gas-turbine and jet engines, may replace the conventional (gearbox-driven) electrical power generators aboard jet aircraft. This study projects significant improvements not only in aircraft electrical power-generating-system performance, but also in overall aircraft performance. Jet -engine design modifications incorporating this concept not only save weight (and thus fuel), but are--in themselves --favorable to jet-engine performance. The dissertation concentrates on operational, constructional, structural, thermal, optical, radiometrical, thin-film, and solid-state theoretical aspects of the overall project. This new electrical power-generating system offers solid-state reliability with electrical power-output capability comparable to that of existing aircraft electromechanical power-generating systems (alternators and generators). In addition to improvements in aircraft performance, significant aircraft fuel- and weight-saving advantages are projected.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurth, Thorsten; Pochinsky, Andrew; Sarje, Abhinav

Practitioners of lattice QCD/QFT have been some of the primary pioneer users of the state-of-the-art high-performance-computing systems, and contribute towards the stress tests of such new machines as soon as they become available. As with all aspects of high-performance-computing, I/O is becoming an increasingly specialized component of these systems. In order to take advantage of the latest available high-performance I/O infrastructure, to ensure reliability and backwards compatibility of data files, and to help unify the data structures used in lattice codes, we have incorporated parallel HDF5 I/O into the SciDAC supported USQCD software stack. Here we present the design andmore » implementation of this I/O framework. Our HDF5 implementation outperforms optimized QIO at the 10-20% level and leaves room for further improvement by utilizing appropriate dataset chunking.« less

Advanced materials and techniques for fibre-optic sensing

NASA Astrophysics Data System (ADS)

Henderson, Philip J.

2014-06-01

Fibre-optic monitoring systems came of age in about 1999 upon the emergence of the world's first significant commercialising company - a spin-out from the UK's collaborative MAST project. By using embedded fibre-optic technology, the MAST project successfully measured transient strain within high-performance composite yacht masts. Since then, applications have extended from smart composites into civil engineering, energy, military, aerospace, medicine and other sectors. Fibre-optic sensors come in various forms, and may be subject to embedment, retrofitting, and remote interrogation. The unique challenges presented by each implementation require careful scrutiny before widespread adoption can take place. Accordingly, various aspects of design and reliability are discussed spanning a range of representative technologies that include resonant microsilicon structures, MEMS, Bragg gratings, advanced forms of spectroscopy, and modern trends in nanotechnology. Keywords: Fibre-optic sensors, fibre Bragg gratings, MEMS, MOEMS, nanotechnology, plasmon.

Multiscale characterization and analysis of shapes

DOEpatents

Prasad, Lakshman; Rao, Ramana

2002-01-01

An adaptive multiscale method approximates shapes with continuous or uniformly and densely sampled contours, with the purpose of sparsely and nonuniformly discretizing the boundaries of shapes at any prescribed resolution, while at the same time retaining the salient shape features at that resolution. In another aspect, a fundamental geometric filtering scheme using the Constrained Delaunay Triangulation (CDT) of polygonized shapes creates an efficient parsing of shapes into components that have semantic significance dependent only on the shapes' structure and not on their representations per se. A shape skeletonization process generalizes to sparsely discretized shapes, with the additional benefit of prunability to filter out irrelevant and morphologically insignificant features. The skeletal representation of characters of varying thickness and the elimination of insignificant and noisy spurs and branches from the skeleton greatly increases the robustness, reliability and recognition rates of character recognition algorithms.

Probabilistic sizing of laminates with uncertainties

NASA Technical Reports Server (NTRS)

Shah, A. R.; Liaw, D. G.; Chamis, C. C.

1993-01-01

A reliability based design methodology for laminate sizing and configuration for a special case of composite structures is described. The methodology combines probabilistic composite mechanics with probabilistic structural analysis. The uncertainties of constituent materials (fiber and matrix) to predict macroscopic behavior are simulated using probabilistic theory. Uncertainties in the degradation of composite material properties are included in this design methodology. A multi-factor interaction equation is used to evaluate load and environment dependent degradation of the composite material properties at the micromechanics level. The methodology is integrated into a computer code IPACS (Integrated Probabilistic Assessment of Composite Structures). Versatility of this design approach is demonstrated by performing a multi-level probabilistic analysis to size the laminates for design structural reliability of random type structures. The results show that laminate configurations can be selected to improve the structural reliability from three failures in 1000, to no failures in one million. Results also show that the laminates with the highest reliability are the least sensitive to the loading conditions.

Multidisciplinary System Reliability Analysis

NASA Technical Reports Server (NTRS)

Mahadevan, Sankaran; Han, Song; Chamis, Christos C. (Technical Monitor)

2001-01-01

The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code, developed under the leadership of NASA Glenn Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multidisciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

Multi-Disciplinary System Reliability Analysis

NASA Technical Reports Server (NTRS)

Mahadevan, Sankaran; Han, Song

1997-01-01

The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code developed under the leadership of NASA Lewis Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multi-disciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

Three dimensional adaptive mesh refinement on a spherical shell for atmospheric models with lagrangian coordinates

NASA Astrophysics Data System (ADS)

Penner, Joyce E.; Andronova, Natalia; Oehmke, Robert C.; Brown, Jonathan; Stout, Quentin F.; Jablonowski, Christiane; van Leer, Bram; Powell, Kenneth G.; Herzog, Michael

2007-07-01

One of the most important advances needed in global climate models is the development of atmospheric General Circulation Models (GCMs) that can reliably treat convection. Such GCMs require high resolution in local convectively active regions, both in the horizontal and vertical directions. During previous research we have developed an Adaptive Mesh Refinement (AMR) dynamical core that can adapt its grid resolution horizontally. Our approach utilizes a finite volume numerical representation of the partial differential equations with floating Lagrangian vertical coordinates and requires resolving dynamical processes on small spatial scales. For the latter it uses a newly developed general-purpose library, which facilitates 3D block-structured AMR on spherical grids. The library manages neighbor information as the blocks adapt, and handles the parallel communication and load balancing, freeing the user to concentrate on the scientific modeling aspects of their code. In particular, this library defines and manages adaptive blocks on the sphere, provides user interfaces for interpolation routines and supports the communication and load-balancing aspects for parallel applications. We have successfully tested the library in a 2-D (longitude-latitude) implementation. During the past year, we have extended the library to treat adaptive mesh refinement in the vertical direction. Preliminary results are discussed. This research project is characterized by an interdisciplinary approach involving atmospheric science, computer science and mathematical/numerical aspects. The work is done in close collaboration between the Atmospheric Science, Computer Science and Aerospace Engineering Departments at the University of Michigan and NOAA GFDL.

Nuclear-Physics Aspects of Controlled Thermonuclear Fusion: Analysis of Promising Fuels and Gamma-Ray Diagnostics of Hot Plasma

NASA Astrophysics Data System (ADS)

Voronchev, V. T.; Kukulin, V. I.

2000-12-01

A brief survey of nuclear-physics aspects of the problems of controlled thermonuclear fusion is given. Attention is paid primarily to choosing and analyzing an optimal composition of a nuclear fuel, reliably extrapolating the cross sections for nuclear reactions to the region of low energies, and exploring gamma-ray methods (as a matter of fact, very promising methods indeed) for diagnostics of hot plasmas (three aspects that are often thought to be the most important ones). In particular, a comparative nuclear-physics analysis of hydrogen, DT, and DD thermonuclear fuels and of their alternatives in the form of D3He, D6Li, DT6Li, H6Li, H11B, and H9Be is performed. Their advantages and disadvantages are highlighted; a spin-polarized fuel is considered; and the current status of nuclear data on the processes of interest is analyzed. A procedure for determining cross sections for nuclear reactions in the deep-subbarrier region is discussed. By considering the example of low-energy D+6Li interactions, it is shown that, at ion temperatures below 100 keV, the inclusion of nuclear-structure factors leads to an additional enhancement of the rate parameters <σv> for the ( d, pt) and ( d, nτ) channels by 10-40%. The possibility of using nuclear reactions that lead to photon emission as a means for determining the ion temperature of a thermonuclear plasma is discussed.

The Experiences in Close Relationship Scale (ECR)-short form: reliability, validity, and factor structure.

PubMed

Wei, Meifen; Russell, Daniel W; Mallinckrodt, Brent; Vogel, David L

2007-04-01

We developed a 12-item, short form of the Experiences in Close Relationship Scale (ECR; Brennan, Clark, & Shaver, 1998) across 6 studies. In Study 1, we examined the reliability and factor structure of the measure. In Studies 2 and 3, we cross-validated the reliability, factor structure, and validity of the short form measure; whereas in Study 4, we examined test-retest reliability over a 1-month period. In Studies 5 and 6, we further assessed the reliability, factor structure, and validity of the short version of the ECR when administered as a stand-alone instrument. Confirmatory factor analyses indicated that 2 factors, labeled Anxiety and Avoidance, provided a good fit to the data after removing the influence of response sets. We found validity to be equivalent for the short and the original versions of the ECR across studies. Finally, the results were comparable when we embedded the short form within the original version of the ECR and when we administered it as a stand-alone measure.

Reliability of a structured interview for admission to an emergency medicine residency program.

PubMed

Blouin, Danielle

2010-10-01

Interviews are most important in resident selection. Structured interviews are more reliable than unstructured ones. We sought to measure the interrater reliability of a newly designed structured interview during the selection process to an Emergency Medicine residency program. The critical incident technique was used to extract the desired dimensions of performance. The interview tool consisted of 7 clinical scenarios and 1 global rating. Three trained interviewers marked each candidate on all scenarios without discussing candidates' responses. Interitem consistency and estimates of variance were computed. Twenty-eight candidates were interviewed. The generalizability coefficient was 0.67. Removing the central tendency ratings increased the coefficient to 0.74. Coefficients of interitem consistency ranged from 0.64 to 0.74. The structured interview tool provided good although suboptimal interrater reliability. Increasing the number of scenarios improves reliability as does applying differential weights to the rating scale anchors. The latter would also facilitate the identification of those candidates with extreme ratings.

Innovative approaches for increasing transportation options for people with disabilities in Florida.

DOT National Transportation Integrated Search

2010-04-01

Accessible, affordable, and reliable transportation is a critical component to community inclusion. : Having access to the community is the key to many aspects of independence and self-sufficiency. : Floridas transportation delivery system is very...

Basic Principles of Electrical Network Reliability Optimization in Liberalised Electricity Market

NASA Astrophysics Data System (ADS)

Oleinikova, I.; Krishans, Z.; Mutule, A.

2008-01-01

The authors propose to select long-term solutions to the reliability problems of electrical networks in the stage of development planning. The guide lines or basic principles of such optimization are: 1) its dynamical nature; 2) development sustainability; 3) integrated solution of the problems of network development and electricity supply reliability; 4) consideration of information uncertainty; 5) concurrent consideration of the network and generation development problems; 6) application of specialized information technologies; 7) definition of requirements for independent electricity producers. In the article, the major aspects of liberalized electricity market, its functions and tasks are reviewed, with emphasis placed on the optimization of electrical network development as a significant component of sustainable management of power systems.

Structural Probability Concepts Adapted to Electrical Engineering

NASA Technical Reports Server (NTRS)

Steinberg, Eric P.; Chamis, Christos C.

1994-01-01

Through the use of equivalent variable analogies, the authors demonstrate how an electrical subsystem can be modeled by an equivalent structural subsystem. This allows the electrical subsystem to be probabilistically analyzed by using available structural reliability computer codes such as NESSUS. With the ability to analyze the electrical subsystem probabilistically, we can evaluate the reliability of systems that include both structural and electrical subsystems. Common examples of such systems are a structural subsystem integrated with a health-monitoring subsystem, and smart structures. Since these systems have electrical subsystems that directly affect the operation of the overall system, probabilistically analyzing them could lead to improved reliability and reduced costs. The direct effect of the electrical subsystem on the structural subsystem is of secondary order and is not considered in the scope of this work.

Relational, Structural, and Semantic Analysis of Graphical Representations and Concept Maps

ERIC Educational Resources Information Center

Ifenthaler, Dirk

2010-01-01

The demand for good instructional environments presupposes valid and reliable analytical instruments for educational research. This paper introduces the "SMD Technology" (Surface, Matching, Deep Structure), which measures relational, structural, and semantic levels of graphical representations and concept maps. The reliability and validity of the…

Aluminum automotive space frames

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-08-01

Design of aluminum structures is to a new topic. Aircraft makers have successfully solved difficult structural problems with a high degree of understanding and reliability. Other transportation modes such as trucks, trailers, and railcars have faced structural problems with some emphasis on high- and low-cycle fatigue of welded aluminum structures. However, the automotive market places stringent engineering demands on materials and superimposes demanding cost constraints. A project was instituted at Reynolds Metals Co. to investigate the opportunities for the cost-effective application of aluminum to automotive spaceframes. Several areas were recognized as key to the success of this application. They were:more » equivalent or superior structural stiffness of the assembly to existing steel unibody and/or steel spaceframe vehicles; effective joining of spaceframe members; equivalent or superior crashworthiness of the assembly; weight savings; flexibility; and low-cost approach aimed at effective manufacturing. To gain experience with the key aspects in a practical environment, the experience of current builders of steel tube frame chassis was explored. These chassis are typically used in low-volume vehicles requiring torsional stiffness, excellent crashworthiness, and exterior body-style flexibility. A model was developed using finite element methods that accurately predicts mass and stiffness of frames. An effective aluminum space frame was generated which was 7.5% stiffer and more than 20% lighter than the steel frame, with stresses kept below the fatigue limit for aluminum welds.« less

Micro-structure and motion of two-dimensional dense short spherocylinder liquids

NASA Astrophysics Data System (ADS)

Wang, Wen; Lin, Jyun-Ting; Su, Yen-Shuo; I, Lin

2018-03-01

We numerically investigate the micro-structure and motion of 2D liquids composed of dense short spherocylinders, by reducing the shape aspect ratio from 3. It is found that reducing shape aspect ratio from 3 causes a smooth transition from heterogeneous structures composed of crystalline ordered domains with good tetratic alignment order to those with good hexagonal bond-orientational order at an aspect ratio equaling 1.35. In the intermediate regime, both structural orders are strongly deteriorated, and the translational hopping rate reaches a maximum due to the poor particle interlocking of the disordered structure. Shortening rod length allows easier rotation, induces monotonic increase of rotational hopping rates, and resumes the separation of rotational and translational hopping time scales at the small aspect ratio end, after the crossover of their rates in the intermediate regime. At the large shape aspect ratio end, the poor local tetratic order has the same positive effects on facilitating local rotational and translational hopping. In contrast, at the small shape aspect ratio end, the poor local bond orientational order has the opposite effects on facilitating local rotational and translational hopping.

Structural reliability calculation method based on the dual neural network and direct integration method.

PubMed

Li, Haibin; He, Yun; Nie, Xiaobo

2018-01-01

Structural reliability analysis under uncertainty is paid wide attention by engineers and scholars due to reflecting the structural characteristics and the bearing actual situation. The direct integration method, started from the definition of reliability theory, is easy to be understood, but there are still mathematics difficulties in the calculation of multiple integrals. Therefore, a dual neural network method is proposed for calculating multiple integrals in this paper. Dual neural network consists of two neural networks. The neural network A is used to learn the integrand function, and the neural network B is used to simulate the original function. According to the derivative relationships between the network output and the network input, the neural network B is derived from the neural network A. On this basis, the performance function of normalization is employed in the proposed method to overcome the difficulty of multiple integrations and to improve the accuracy for reliability calculations. The comparisons between the proposed method and Monte Carlo simulation method, Hasofer-Lind method, the mean value first-order second moment method have demonstrated that the proposed method is an efficient and accurate reliability method for structural reliability problems.

Development and validation of the Consumer Quality index instrument to measure the experience and priority of chronic dialysis patients.

PubMed

van der Veer, Sabine N; Jager, Kitty J; Visserman, Ella; Beekman, Robert J; Boeschoten, Els W; de Keizer, Nicolette F; Heuveling, Lara; Stronks, Karien; Arah, Onyebuchi A

2012-08-01

Patient experience is an established indicator of quality of care. Validated tools that measure both experiences and priorities are lacking for chronic dialysis care, hampering identification of negative experiences that patients actually rate important. We developed two Consumer Quality (CQ) index questionnaires, one for in-centre haemodialysis (CHD) and the other for peritoneal dialysis and home haemodialysis (PHHD) care. The instruments were validated using exploratory factor analyses, reliability analysis of identified scales and assessing the association between reliable scales and global ratings. We investigated opportunities for improvement by combining suboptimal experience with patient priority. Sixteen dialysis centres participated in our study. The pilot CQ index for CHD care consisted of 71 questions. Based on data of 592 respondents, we identified 42 core experience items in 10 scales with Cronbach's α ranging from 0.38 to 0.88; five were reliable (α ≥ 0.70). The instrument identified information on centres' fire procedures as the aspect of care exhibiting the biggest opportunity for improvement. The pilot CQ index PHHD comprised 56 questions. The response of 248 patients yielded 31 core experience items in nine scales with Cronbach's α ranging between 0.53 and 0.85; six were reliable. Information on kidney transplantation during pre-dialysis showed most room for improvement. However, for both types of care, opportunities for improvement were mostly limited. The CQ index reliably and validly captures dialysis patient experience. Overall, most care aspects showed limited room for improvement, mainly because patients participating in our study rated their experience to be optimal. To evaluate items with high priority, but with which relatively few patients have experience, more qualitative instruments should be considered.

Questionnaire for measuring organisational attributes in dental-care practices: psychometric properties and test-retest reliability.

PubMed

Goetz, Katja; Hasse, Philipp; Szecsenyi, Joachim; Campbell, Stephen M

2016-04-01

The consideration of organisational aspects, such as shared goals and clear communication, within the health care team is important to ensure good quality care. In primary health care, the instrument Survey of Organizational Attributes for Primary Care (SOAPC) is available to measure organisational attributes of care. However, there is no instrument available for dental care. The aim of the present study was to investigate psychometric properties and test-retest reliability of the version of SOAPC adapted for dental care, namely the Survey of Organizational Attributes in Dental Care (SOADC). The SOADC consists of 21 items in the following four subscales: communication; decision making; stress/chaos; and history of change. Convergent construct validity was measured using the job satisfaction scale. A total of 287 dental-care practices were asked to participate in the validation study. Psychometric properties and test-retest reliability were observed. A total of 43 dental-care practices responded to the survey. At baseline, 178 dental-care staff completed the questionnaire, and 4 weeks later 138 did so. Internal consistency, measured by Cronbach's alpha, was 0.718 or higher in the subscales. The test-retest reliability for each subscale and the overall SOADC score demonstrated good correlations over the 4-week test-retest interval, except for 'history of change'. A strong correlation with the aggregated job-satisfaction scale showed high convergent construct validity of SOADC. The consideration of organisational aspects from the perspective of dental-care teams is important for providing good quality of care. The SOADC is a reliable instrument with good psychometric properties and is suitable for the evaluation of organisational attributes in dental-care practices. © 2015 FDI World Dental Federation.

Inter-rater reliability and aspects of validity of the parent-infant relationship global assessment scale (PIR-GAS)

PubMed Central

2013-01-01

Background The Parent-Infant Relationship Global Assessment Scale (PIR-GAS) signifies a conceptually relevant development in the multi-axial, developmentally sensitive classification system DC:0-3R for preschool children. However, information about the reliability and validity of the PIR-GAS is rare. A review of the available empirical studies suggests that in research, PIR-GAS ratings can be based on a ten-minute videotaped interaction sequence. The qualification of raters may be very heterogeneous across studies. Methods To test whether the use of the PIR-GAS still allows for a reliable assessment of the parent-infant relationship, our study compared a PIR-GAS ratings based on a full-information procedure across multiple settings with ratings based on a ten-minute video by two doctoral candidates of medicine. For each mother-child dyad at a family day hospital (N = 48), we obtained two video ratings and one full-information rating at admission to therapy and at discharge. This pre-post design allowed for a replication of our findings across the two measurement points. We focused on the inter-rater reliability between the video coders, as well as between the video and full-information procedure, including mean differences and correlations between the raters. Additionally, we examined aspects of the validity of video and full-information ratings based on their correlation with measures of child and maternal psychopathology. Results Our results showed that a ten-minute video and full-information PIR-GAS ratings were not interchangeable. Most results at admission could be replicated by the data obtained at discharge. We concluded that a higher degree of standardization of the assessment procedure should increase the reliability of the PIR-GAS, and a more thorough theoretical foundation of the manual should increase its validity. PMID:23705962

Frustration in biomolecules.

PubMed

Ferreiro, Diego U; Komives, Elizabeth A; Wolynes, Peter G

2014-11-01

Biomolecules are the prime information processing elements of living matter. Most of these inanimate systems are polymers that compute their own structures and dynamics using as input seemingly random character strings of their sequence, following which they coalesce and perform integrated cellular functions. In large computational systems with finite interaction-codes, the appearance of conflicting goals is inevitable. Simple conflicting forces can lead to quite complex structures and behaviors, leading to the concept of frustration in condensed matter. We present here some basic ideas about frustration in biomolecules and how the frustration concept leads to a better appreciation of many aspects of the architecture of biomolecules, and especially how biomolecular structure connects to function by means of localized frustration. These ideas are simultaneously both seductively simple and perilously subtle to grasp completely. The energy landscape theory of protein folding provides a framework for quantifying frustration in large systems and has been implemented at many levels of description. We first review the notion of frustration from the areas of abstract logic and its uses in simple condensed matter systems. We discuss then how the frustration concept applies specifically to heteropolymers, testing folding landscape theory in computer simulations of protein models and in experimentally accessible systems. Studying the aspects of frustration averaged over many proteins provides ways to infer energy functions useful for reliable structure prediction. We discuss how frustration affects folding mechanisms. We review here how the biological functions of proteins are related to subtle local physical frustration effects and how frustration influences the appearance of metastable states, the nature of binding processes, catalysis and allosteric transitions. In this review, we also emphasize that frustration, far from being always a bad thing, is an essential feature of biomolecules that allows dynamics to be harnessed for function. In this way, we hope to illustrate how Frustration is a fundamental concept in molecular biology.

Probabilistic Finite Element Analysis & Design Optimization for Structural Designs

NASA Astrophysics Data System (ADS)

Deivanayagam, Arumugam

This study focuses on implementing probabilistic nature of material properties (Kevlar® 49) to the existing deterministic finite element analysis (FEA) of fabric based engine containment system through Monte Carlo simulations (MCS) and implementation of probabilistic analysis in engineering designs through Reliability Based Design Optimization (RBDO). First, the emphasis is on experimental data analysis focusing on probabilistic distribution models which characterize the randomness associated with the experimental data. The material properties of Kevlar® 49 are modeled using experimental data analysis and implemented along with an existing spiral modeling scheme (SMS) and user defined constitutive model (UMAT) for fabric based engine containment simulations in LS-DYNA. MCS of the model are performed to observe the failure pattern and exit velocities of the models. Then the solutions are compared with NASA experimental tests and deterministic results. MCS with probabilistic material data give a good prospective on results rather than a single deterministic simulation results. The next part of research is to implement the probabilistic material properties in engineering designs. The main aim of structural design is to obtain optimal solutions. In any case, in a deterministic optimization problem even though the structures are cost effective, it becomes highly unreliable if the uncertainty that may be associated with the system (material properties, loading etc.) is not represented or considered in the solution process. Reliable and optimal solution can be obtained by performing reliability optimization along with the deterministic optimization, which is RBDO. In RBDO problem formulation, in addition to structural performance constraints, reliability constraints are also considered. This part of research starts with introduction to reliability analysis such as first order reliability analysis, second order reliability analysis followed by simulation technique that are performed to obtain probability of failure and reliability of structures. Next, decoupled RBDO procedure is proposed with a new reliability analysis formulation with sensitivity analysis, which is performed to remove the highly reliable constraints in the RBDO, thereby reducing the computational time and function evaluations. Followed by implementation of the reliability analysis concepts and RBDO in finite element 2D truss problems and a planar beam problem are presented and discussed.

Green Synthesis of Nanomaterials: Environmental Aspects

EPA Science Inventory

There is always a search for reliable and environmentally friendly processes to manufacture metal and metal oxide nanoparticles minimizing or even eliminating the use of hazardous chemicals. The only way to develop these “green” processes is to adapt benign synthesis approaches t...

Fatigue crack initiation of magnesium alloys under elastic stress amplitudes: A review

NASA Astrophysics Data System (ADS)

Wang, B. J.; Xu, D. K.; Wang, S. D.; Han, E. H.

2017-12-01

The most advantageous property of magnesium (Mg) alloys is their density, which is lower compared with traditional metallic materials. Mg alloys, considered the lightest metallic structural material among others, have great potential for applications as secondary load components in the transportation and aerospace industries. The fatigue evaluation of Mg alloys under elastic stress amplitudes is very important in ensuring their service safety and reliability. Given their hexagonal close packed structure, the fatigue crack initiation of Mg and its alloys is closely related to the deformation mechanisms of twinning and basal slips. However, for Mg alloys with shrinkage porosities and inclusions, fatigue cracks will preferentially initiate at these defects, remarkably reducing the fatigue lifetime. In this paper, some fundamental aspects about the fatigue crack initiation mechanisms of Mg alloys are reviewed, including the 3 followings: 1) Fatigue crack initiation of as-cast Mg alloys, 2) influence of microstructure on fatigue crack initiation of wrought Mg alloys, and 3) the effect of heat treatment on fatigue initiation mechanisms. Moreover, some unresolved issues and future target on the fatigue crack initiation mechanism of Mg alloys are also described.

GIFTed Demons: deformable image registration with local structure-preserving regularization using supervoxels for liver applications

PubMed Central

Gleeson, Fergus V.; Brady, Michael; Schnabel, Julia A.

2018-01-01

Abstract. Deformable image registration, a key component of motion correction in medical imaging, needs to be efficient and provides plausible spatial transformations that reliably approximate biological aspects of complex human organ motion. Standard approaches, such as Demons registration, mostly use Gaussian regularization for organ motion, which, though computationally efficient, rule out their application to intrinsically more complex organ motions, such as sliding interfaces. We propose regularization of motion based on supervoxels, which provides an integrated discontinuity preserving prior for motions, such as sliding. More precisely, we replace Gaussian smoothing by fast, structure-preserving, guided filtering to provide efficient, locally adaptive regularization of the estimated displacement field. We illustrate the approach by applying it to estimate sliding motions at lung and liver interfaces on challenging four-dimensional computed tomography (CT) and dynamic contrast-enhanced magnetic resonance imaging datasets. The results show that guided filter-based regularization improves the accuracy of lung and liver motion correction as compared to Gaussian smoothing. Furthermore, our framework achieves state-of-the-art results on a publicly available CT liver dataset. PMID:29662918

GIFTed Demons: deformable image registration with local structure-preserving regularization using supervoxels for liver applications.

PubMed

Papież, Bartłomiej W; Franklin, James M; Heinrich, Mattias P; Gleeson, Fergus V; Brady, Michael; Schnabel, Julia A

2018-04-01

Deformable image registration, a key component of motion correction in medical imaging, needs to be efficient and provides plausible spatial transformations that reliably approximate biological aspects of complex human organ motion. Standard approaches, such as Demons registration, mostly use Gaussian regularization for organ motion, which, though computationally efficient, rule out their application to intrinsically more complex organ motions, such as sliding interfaces. We propose regularization of motion based on supervoxels, which provides an integrated discontinuity preserving prior for motions, such as sliding. More precisely, we replace Gaussian smoothing by fast, structure-preserving, guided filtering to provide efficient, locally adaptive regularization of the estimated displacement field. We illustrate the approach by applying it to estimate sliding motions at lung and liver interfaces on challenging four-dimensional computed tomography (CT) and dynamic contrast-enhanced magnetic resonance imaging datasets. The results show that guided filter-based regularization improves the accuracy of lung and liver motion correction as compared to Gaussian smoothing. Furthermore, our framework achieves state-of-the-art results on a publicly available CT liver dataset.

The Norwegian Junior Temperament and Character Inventory (JTCI): an assessment of its psychometric properties.

PubMed

Vangberg, Hans Christian B; Eisemann, Martin; Waterloo, Knut; Richter, Jörg; Rozsa, Sandor; Cloninger, C Robert

2013-10-01

The role of adolescent personality concerning mental health, well-being, self development, and academic performance is an interesting aspect that needs more attention. The use of the JTCI (Junior Temperament and Character Inventory) can contribute to more knowledge and a better understanding of a possible influence of personality in this context. The aim of this study was to assess the psychometric properties of the Norwegian version of the JTCI among an adolescent sample in terms of factor analysis, reliability and validity. The sample included 2075 subjects in the age from 15-18years. We analyzed the factor structure, internal consistency, and validity of the measure. The Norwegian version of the JTCI was found to have good psychometric properties in terms of internal consistency, a reasonable factor structure and significant correlations with depression, self-esteem, and self-efficacy. However, further research on its differentiation of Harm Avoidance and Self-directedness is needed. The JTCI appears as a useful tool in addressing issues ranging from scholastic performance to developmental issues, mental health and well-being. Copyright © 2013 Elsevier Inc. All rights reserved.

Error correcting coding-theory for structured light illumination systems

NASA Astrophysics Data System (ADS)

Porras-Aguilar, Rosario; Falaggis, Konstantinos; Ramos-Garcia, Ruben

2017-06-01

Intensity discrete structured light illumination systems project a series of projection patterns for the estimation of the absolute fringe order using only the temporal grey-level sequence at each pixel. This work proposes the use of error-correcting codes for pixel-wise correction of measurement errors. The use of an error correcting code is advantageous in many ways: it allows reducing the effect of random intensity noise, it corrects outliners near the border of the fringe commonly present when using intensity discrete patterns, and it provides a robustness in case of severe measurement errors (even for burst errors where whole frames are lost). The latter aspect is particular interesting in environments with varying ambient light as well as in critical safety applications as e.g. monitoring of deformations of components in nuclear power plants, where a high reliability is ensured even in case of short measurement disruptions. A special form of burst errors is the so-called salt and pepper noise, which can largely be removed with error correcting codes using only the information of a given pixel. The performance of this technique is evaluated using both simulations and experiments.

Development of a method for rating climate seat comfort

NASA Astrophysics Data System (ADS)

Scheffelmeier, M.; Classen, E.

2017-10-01

The comfort aspect in the vehicle interior is becoming increasingly important. A high comfort level offers the driver a good and secure feeling and has a strong influence on passive traffic safety. One important part of comfort is the climate aspect, especially the microclimate that emerges between passenger and seat. In this research, different combinations of typical seat materials are used. Fourteen woven and knitted fabrics and eight leathers and its substitutes for the face fabric layer, one foam, one non-woven and one 3D spacer for the plus pad layer and for the support layer three foam types with variations in structure and raw material as well as one rubber hair structure were investigated. To characterise this sample set by thermo-physiological aspects (e.g. water vapour resistance Ret, thermal resistance Rct, buffering capacity of water vapour Fd) regular and modified sweating guarded hotplates were used according to DIN EN ISO 11092. The results of the material characterisation confirm the common knowledge that seat covers out of textiles have better water vapour resistance values than leathers and its substitutes. Subject trials in a driving simulator were executed to rate the subjective sensation while driving in a vehicle seat. With a thermal, sweating Manikin (Newton Type, Thermetrics) objective product measurements were carried out on the same seat. Indeed the subject trials show that every test subject has his or her own subjective perception concerning the climate comfort. The results of the subject trials offered the parameters for the Newton measuring method. Respectively the sweating rate, sit-in procedure, ambient conditions and sensor positions on and between the seat layers must be comparable with the subject trials. By taking care of all these parameters it is possible to get repeatable and reliable results with the Newton Manikin. The subjective feelings of the test subjects, concerning the microclimate between seat and passenger, provide the evaluation of the Manikins output (Rc and Re values).

Design for a Crane Metallic Structure Based on Imperialist Competitive Algorithm and Inverse Reliability Strategy

NASA Astrophysics Data System (ADS)

Fan, Xiao-Ning; Zhi, Bo

2017-07-01

Uncertainties in parameters such as materials, loading, and geometry are inevitable in designing metallic structures for cranes. When considering these uncertainty factors, reliability-based design optimization (RBDO) offers a more reasonable design approach. However, existing RBDO methods for crane metallic structures are prone to low convergence speed and high computational cost. A unilevel RBDO method, combining a discrete imperialist competitive algorithm with an inverse reliability strategy based on the performance measure approach, is developed. Application of the imperialist competitive algorithm at the optimization level significantly improves the convergence speed of this RBDO method. At the reliability analysis level, the inverse reliability strategy is used to determine the feasibility of each probabilistic constraint at each design point by calculating its α-percentile performance, thereby avoiding convergence failure, calculation error, and disproportionate computational effort encountered using conventional moment and simulation methods. Application of the RBDO method to an actual crane structure shows that the developed RBDO realizes a design with the best tradeoff between economy and safety together with about one-third of the convergence speed and the computational cost of the existing method. This paper provides a scientific and effective design approach for the design of metallic structures of cranes.

Practitioner review: Social (pragmatic) communication disorder conceptualization, evidence and clinical implications.

PubMed

Norbury, Courtenay F

2014-03-01

DSM-5 sees the introduction of Social (Pragmatic) Communication Disorder (SPCD), characterized by persistent difficulties using verbal and nonverbal communication for social purposes, in the absence of restricted and repetitive interests and behaviours. There is currently much confusion about the precise diagnostic criteria for SPCD and how this disorder relates to autism spectrum disorders (ASD), previous descriptions of pragmatic language impairment (PLI) and more specific language disorders (LD). Proposed criteria for SPCD are outlined. A selective review of the evidence considers whether these criteria form a cohesive and distinct diagnostic entity. Approaches to assessment and intervention are discussed. Implementing the new diagnosis is currently challenged by a lack of well-validated and reliable assessment measures, and observed continuities between SPCD and other neurodevelopmental disorders. High rates of comorbidity between SPCD and other seemingly disparate disorders (including conduct disorder, ADHD and disorders of known genetic origin) raise questions about the utility of this diagnostic category. SPCD is probably best conceptualized as a dimensional symptom profile that may be present across a range of neurodevelopmental disorders, although there is an urgent need to investigate the latent structure of SPCD using consistent diagnostic criteria. In addition, social communication and aspects of pragmatic language may be dissociated, with the latter heavily influenced by structural language attainments. Finally, there is a dearth of reliable and culturally valid assessment measures with which to make a differential diagnosis, and few rigorously tested intervention programmes. The implications for research and clinical practice are outlined. © 2013 The Authors. Journal of Child Psychology and Psychiatry © 2013 Association for Child and Adolescent Mental Health.

Reliability of the sliding scale for collecting affective responses to words.

PubMed

Imbault, C; Shore, D; Kuperman, V

2018-01-25

Warriner, Shore, Schmidt, Imbault, and Kuperman, Canadian Journal of Experimental Psychology, 71; 71-88 (2017) have recently proposed a slider task in which participants move a manikin on a computer screen toward or further away from a word, and the distance (in pixels) is a measure of the word's valence. Warriner, Shore, Schmidt, Imbault, and Kuperman, Canadian Journal of Experimental Psychology, 71; 71-88 (2017) showed this task to be more valid than the widely used rating task, but they did not examine the reliability of the new methodology. In this study we investigated multiple aspects of this task's reliability. In Experiment 1 (Exps. 1.1-1.6), we showed that the sliding scale has high split-half reliability (r = .868 to .931). In Experiment 2, we also showed that the slider task elicits consistent repeated responses both within a single session (Exp. 2: r = .804) and across two sessions separated by one week (Exp. 3: r = .754). Overall, the slider task, in addition to having high validity, is highly reliable.

Optimal periodic proof test based on cost-effective and reliability criteria

NASA Technical Reports Server (NTRS)

Yang, J.-N.

1976-01-01

An exploratory study for the optimization of periodic proof tests for fatigue-critical structures is presented. The optimal proof load level and the optimal number of periodic proof tests are determined by minimizing the total expected (statistical average) cost, while the constraint on the allowable level of structural reliability is satisfied. The total expected cost consists of the expected cost of proof tests, the expected cost of structures destroyed by proof tests, and the expected cost of structural failure in service. It is demonstrated by numerical examples that significant cost saving and reliability improvement for fatigue-critical structures can be achieved by the application of the optimal periodic proof test. The present study is relevant to the establishment of optimal maintenance procedures for fatigue-critical structures.

A systematic review of the factor structure and reliability of the Spence Children's Anxiety Scale.

PubMed

Orgilés, Mireia; Fernández-Martínez, Iván; Guillén-Riquelme, Alejandro; Espada, José P; Essau, Cecilia A

2016-01-15

The Spence Children's Anxiety Scale (SCAS) is a widely used instrument for assessing symptoms of anxiety disorders among children and adolescents. Previous studies have demonstrated its good reliability for children and adolescents from different backgrounds. However, remarkable variability in the reliability of the SCAS across studies and inconsistent results regarding its factor structure has been found. The present study aims to examine the SCAS factor structure by means of a systematic review with narrative synthesis, the mean reliability of the SCAS by means of a meta-analysis, and the influence of the moderators on the SCAS reliability. Databases employed to collect the studies included Scholar Google, PsycARTICLES, PsycINFO, Web of Science, and Scopus since 1997. Twenty-nine and 32 studies, which examined the factor structure and the internal consistency of the SCAS, respectively, were included. The SCAS was found to have strong internal consistency, influenced by different moderators. The systematic review demonstrated that the original six-factor model was supported by most studies. Factorial invariance studies (across age, gender, country) and test-retest reliability of the SCAS were not examined in this study. It is concluded that the SCAS is a reliable instrument for cross-cultural use, and it is suggested that the original six-factor model is appropriate for cross-cultural application. Copyright © 2015 Elsevier B.V. All rights reserved.

Reliability-Based Design Optimization of a Composite Airframe Component

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Pai, Shantaram S.; Coroneos, Rula M.

2009-01-01

A stochastic design optimization methodology (SDO) has been developed to design components of an airframe structure that can be made of metallic and composite materials. The design is obtained as a function of the risk level, or reliability, p. The design method treats uncertainties in load, strength, and material properties as distribution functions, which are defined with mean values and standard deviations. A design constraint or a failure mode is specified as a function of reliability p. Solution to stochastic optimization yields the weight of a structure as a function of reliability p. Optimum weight versus reliability p traced out an inverted-S-shaped graph. The center of the inverted-S graph corresponded to 50 percent (p = 0.5) probability of success. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure that corresponds to unity for reliability p (or p = 1). Weight can be reduced to a small value for the most failure-prone design with a reliability that approaches zero (p = 0). Reliability can be changed for different components of an airframe structure. For example, the landing gear can be designed for a very high reliability, whereas it can be reduced to a small extent for a raked wingtip. The SDO capability is obtained by combining three codes: (1) The MSC/Nastran code was the deterministic analysis tool, (2) The fast probabilistic integrator, or the FPI module of the NESSUS software, was the probabilistic calculator, and (3) NASA Glenn Research Center s optimization testbed CometBoards became the optimizer. The SDO capability requires a finite element structural model, a material model, a load model, and a design model. The stochastic optimization concept is illustrated considering an academic example and a real-life raked wingtip structure of the Boeing 767-400 extended range airliner made of metallic and composite materials.

Translation to Brazilian Portuguese, cultural adaptation and reproducibility of the questionnaire "Ankylosing Spondylitis: What do you know?"

PubMed

Orlandi, Aline; Brumini, Christine; Jones, Anamaria; Natour, Jamil

2016-09-26

Ankylosing spondylitis (AS) generates inflammation and pain in entheses, peripheral joints and the spine. Education regarding AS can improve patients' disability. Thus, it is important to assess patients' knowledge. There is no instrument in the literature for assessing knowledge of AS in Portuguese. The aim here was to translate to the Brazilian Portuguese language, culturally adapt and test the reliability of the questionnaire "Ankylosing Spondylitis: What do you know?" and to correlate the findings with other factors. Original article regarding validation of questionnaire, produced at the Federal University of Sao Paulo (Unifesp). For translation and cultural adaptation, Guilleman methodology was used. After the first phase, the reliability was tested on 30 patients. Correlations between these scores and other factors were examined. In the interobserver assessment, the Pearson correlation coefficient and Cronbach's alpha were 0.831 and 0.895, respectively. In the intraobserver evaluation, the intraclass correlation coefficient and Cronbach's alpha were 0.79 and 0.883, respectively. At this stage, the score for area of knowledge A showed correlations with ethnicity and education; the score for area D, with age; the total score and scores for areas A and B with "social aspects" of SF-36; and the score for area D with "pain", "vitality" and "emotional aspects" of SF-36. The Brazilian version of the questionnaire "Ankylosing Spondylitis: What do you know?" was created. It is reproducible and correlates with education level, ethnicity and the SF-36 domains "social aspects" and "emotional aspects".

Critical aspects of integrated monitoring systems for landslides risk management: strategies for a reliable approach

NASA Astrophysics Data System (ADS)

Castagnetti, C.; Bertacchini, E.; Capra, A.; Corsini, A.

2012-04-01

The use of advanced technologies for remotely monitor surface processes is a successful way for improving the knowledge of phenomena evolution. In addition, the integration of various techniques is becoming more and more common in order to implement early warning systems that can monitor the evolution of landslides in time and prevent emergencies. The reliability of those systems plays a key role when Public Administrations have to plan actions in case of disasters or for preventing an incoming emergency. To have confidence in the information given by the system is an essential condition for a successful policy aiming to protect the population. The research deals with the major critical aspects to be taken into account when implementing a reliable monitoring system for unstable slopes. The importance of those aspects is often neglected, unlike the effects of a not careful implementation and management of the system can lead to erroneous interpretations of the phenomenon itself. The case study which ruled the research and highlighted the actual need of guidelines for setting up a reliable monitoring system is the Valoria landslide, located in the Northern Italy. The system is based on the integration of an automatic Total Station (TS) measuring 45 reflectors and a master GPS, acting as the reference station for three rovers placed within the landslide. In order to monitor local disturbing effects, a bi-dimensional clinometer has been applied on the TS pillar. Topographic measurements have been also integrated with geotechnical sensors (inclinometers and piezometers) in a GIS for landslide risk management. At the very beginning, periodic measurements were carried out, while the system is now performing continuously since 2008. The system permitted to evaluate movements from few millimeter till some meters per day in most dangerous areas. A more spatially continuous description has been also provided by LiDAR and terrestrial SAR interferometry. Some of the most interesting and critical aspects that will be deeper described and analyzed are: - strategy for planning a successful integrated system for continuous monitoring. - Choice of the reference frame: local coordinate system or georeferenced one. - Stability of the site for the master unit positioning: GPS time series analysis for controlling the effective stability. Thanks to the GPS master station that are operating for over three years, atmospheric disturbances affecting the signal may be removed in order to carefully verify the stability of the area and to establish whether the site is geologically stable, as originally suggested, or not. In the latter case, the magnitude of movements may also be computed for providing corrections to TS observations. - Stability of the monumentation, both for reference points and TS pillar. This is an essential aspect for avoiding misinterpretations when analyzing displacements of prisms placed within the landslide. The results of experiences carried out by Authors over last years about different landslides will be presented in order to propose guidelines for a sort of procedure aiming to increase the reliability of the information provided by the system and the usefulness for local Agencies.

Assessing the surgical skills of trainees in the operating theatre: a prospective observational study of the methodology.

PubMed

Beard, J D; Marriott, J; Purdie, H; Crossley, J

2011-01-01

To compare user satisfaction and acceptability, reliability and validity of three different methods of assessing the surgical skills of trainees by direct observation in the operating theatre across a range of different surgical specialties and index procedures. A 2-year prospective, observational study in the operating theatres of three teaching hospitals in Sheffield. The assessment methods were procedure-based assessment (PBA), Objective Structured Assessment of Technical Skills (OSATS) and Non-technical Skills for Surgeons (NOTSS). The specialties were obstetrics and gynaecology (O&G) and upper gastrointestinal, colorectal, cardiac, vascular and orthopaedic surgery. Two to four typical index procedures were selected from each specialty. Surgical trainees were directly observed performing typical index procedures and assessed using a combination of two of the three methods (OSATS or PBA and NOTSS for O&G, PBA and NOTSS for the other specialties) by the consultant clinical supervisor for the case and the anaesthetist and/or scrub nurse, as well as one or more independent assessors from the research team. Information on user satisfaction and acceptability of each assessment method from both assessor and trainee perspectives was obtained from structured questionnaires. The reliability of each method was measured using generalisability theory. Aspects of validity included the internal structure of each tool and correlation between tools, construct validity, predictive validity, interprocedural differences, the effect of assessor designation and the effect of assessment on performance. Of the 558 patients who were consented, a total of 437 (78%) cases were included in the study: 51 consultant clinical supervisors, 56 anaesthetists, 39 nurses, 2 surgical care practitioners and 4 independent assessors provided 1635 assessments on 85 trainees undertaking the 437 cases. A total of 749 PBAs, 695 NOTSS and 191 OSATSs were performed. Non-O&G clinical supervisors and trainees provided mixed, but predominantly positive, responses about a range of applications of PBA. Most felt that PBA was important in surgical education, and would use it again in the future and did not feel that it added time to the operating list. The overall satisfaction of O&G clinical supervisors and trainees with OSATS was not as high, and a majority of those who used both preferred PBA. A majority of anaesthetists and nurses felt that NOTSS allowed them to rate interpersonal skills (communication, teamwork and leadership) more easily than cognitive skills (situation awareness and decision-making), that it had formative value and that it was a valuable adjunct to the assessment of technical skills. PBA demonstrated high reliability (G > 0.8 for only three assessor judgements on the same index procedure). OSATS had lower reliability (G > 0.8 for five assessor judgements on the same index procedure). Both were less reliable on a mix of procedures because of strong procedure-specific factors. A direct comparison of PBA between O&G and non-O&G cases showed a striking difference in reliability. Within O&G, a good level of reliability (G > 0.8) could not be obtained using a feasible number of assessments. Conversely, the reliability within non-O&G cases was exceptionally high, with only two assessor judgements being required. The reasons for this difference probably include the more summative purpose of assessment in O&G and the much higher proportion of O&G trainees in this study with training concerns (42% vs 4%). The reliability of NOTSS was lower than that for PBA. Reliability for the same procedure (G > 0.8) required six assessor judgements. However, as procedure-specific factors exerted a lesser influence on NOTSS, reliability on a mix of procedures could be achieved using only eight assessor judgements. NOTSS also demonstrated a valid internal structure. The strongest correlations between NOTSS and PBA or OSATS were in the 'decision-making' domain. PBA and NOTSS showed better construct validity than OSATS, the year of training and the number of recent index procedures performed being significant independent predictors of performance. There was little variation in scoring between different procedures or different designations of assessor. The results suggest that PBA is a reliable and acceptable method of assessing surgical skills, with good construct validity. Specialties that use OSATS may wish to consider changing the design or switching to PBA. Whatever workplace-based assessment method is used, the purpose, timing and frequency of assessment require detailed guidance. NOTSS is a promising tool for the assessment of non-technical skills, and surgical specialties may wish to consider its inclusion in their assessment framework. Further research is required into the use of health-care professionals other than consultant surgeons to assess trainees, the relationship between performance and experience, the educational impact of assessment and the additional value of video recording.

Complementary aspects of diffusion imaging and fMRI; I: structure and function.

PubMed

Mulkern, Robert V; Davis, Peter E; Haker, Steven J; Estepar, Raul San Jose; Panych, Lawrence P; Maier, Stephan E; Rivkin, Michael J

2006-05-01

Studying the intersection of brain structure and function is an important aspect of modern neuroscience. The development of magnetic resonance imaging (MRI) over the last 25 years has provided new and powerful tools for the study of brain structure and function. Two tools in particular, diffusion imaging and functional MRI (fMRI), are playing increasingly important roles in elucidating the complementary aspects of brain structure and function. In this work, we review basic technical features of diffusion imaging and fMRI for studying the integrity of white matter structural components and for determining the location and extent of cortical activation in gray matter, respectively. We then review a growing body of literature in which the complementary aspects of diffusion imaging and fMRI, applied as separate examinations but analyzed in tandem, have been exploited to enhance our knowledge of brain structure and function.

Probabilistic and structural reliability analysis of laminated composite structures based on the IPACS code

NASA Technical Reports Server (NTRS)

Sobel, Larry; Buttitta, Claudio; Suarez, James

1993-01-01

Probabilistic predictions based on the Integrated Probabilistic Assessment of Composite Structures (IPACS) code are presented for the material and structural response of unnotched and notched, 1M6/3501-6 Gr/Ep laminates. Comparisons of predicted and measured modulus and strength distributions are given for unnotched unidirectional, cross-ply, and quasi-isotropic laminates. The predicted modulus distributions were found to correlate well with the test results for all three unnotched laminates. Correlations of strength distributions for the unnotched laminates are judged good for the unidirectional laminate and fair for the cross-ply laminate, whereas the strength correlation for the quasi-isotropic laminate is deficient because IPACS did not yet have a progressive failure capability. The paper also presents probabilistic and structural reliability analysis predictions for the strain concentration factor (SCF) for an open-hole, quasi-isotropic laminate subjected to longitudinal tension. A special procedure was developed to adapt IPACS for the structural reliability analysis. The reliability results show the importance of identifying the most significant random variables upon which the SCF depends, and of having accurate scatter values for these variables.

[Health survey in Quilombola communities (descendants of Afro-Brazilian slaves who escaped from slave plantations that existed in Brazil until abolition in 1888) in Vitória da Conquista in the state of Bahia (COMQUISTA Project), Brazil: methodological aspects and descriptive analysis].

PubMed

Bezerra, Vanessa Moraes; Medeiros, Danielle Souto de; Gomes, Karine de Oliveira; Souzas, Raquel; Giatti, Luana; Steffens, Ana Paula; Kochergin, Clavdia Nicolaevna; Souza, Cláudio Lima; Moura, Cristiano Soares de; Soares, Daniela Arruda; Santos, Luis Rogério Cosme Silva; Cardoso, Luiz Gustavo Vieira; Oliveira, Márcio Vasconcelos de; Martins, Poliana Cardoso; Neves, Orlando Sílvio Caires; Guimarães, Mark Drew Crosland

2014-06-01

The scope of this article was to present the methodology, preliminary descriptive results and the reliability of the instruments used in the COMQUISTA Project. It involved a cross-sectional study with adults (>18 years) and children (up to 5 years old) of Quilombola communities in Vitória da Conquista, Bahia. Data collection consisted of individual and household interviews, anthropometric and blood pressure measurements. A semi-structured questionnaire adapted from the Brazilian National Health Survey (PNS) was used and the interviews were conducted using handheld computers. 397 housing units were visited and 797 adults and 130 children were interviewed. The demographic profile of the Quilombolas was similar to the Brazilian population with respect to sex and age, however, they had precarious access to basic sanitation and a low socioeconomic status. The analysis of reliability revealed the adequacy of strategies adopted for quality assurance and control in the study. The methodology used was considered adequate to achieve the objectives and can be used in other populations. The results indicate the need for implementing strategies to improve the quality of life and reduce the degree of vulnerability of the Quilombolas.

Researcher Biographies

Science.gov Websites

interest: mechanical system design sensitivity analysis and optimization of linear and nonlinear structural systems, reliability analysis and reliability-based design optimization, computational methods in committee member, ISSMO; Associate Editor, Mechanics Based Design of Structures and Machines; Associate

Reliability Analysis and Reliability-Based Design Optimization of Circular Composite Cylinders Under Axial Compression

NASA Technical Reports Server (NTRS)

Rais-Rohani, Masoud

2001-01-01

This report describes the preliminary results of an investigation on component reliability analysis and reliability-based design optimization of thin-walled circular composite cylinders with average diameter and average length of 15 inches. Structural reliability is based on axial buckling strength of the cylinder. Both Monte Carlo simulation and First Order Reliability Method are considered for reliability analysis with the latter incorporated into the reliability-based structural optimization problem. To improve the efficiency of reliability sensitivity analysis and design optimization solution, the buckling strength of the cylinder is estimated using a second-order response surface model. The sensitivity of the reliability index with respect to the mean and standard deviation of each random variable is calculated and compared. The reliability index is found to be extremely sensitive to the applied load and elastic modulus of the material in the fiber direction. The cylinder diameter was found to have the third highest impact on the reliability index. Also the uncertainty in the applied load, captured by examining different values for its coefficient of variation, is found to have a large influence on cylinder reliability. The optimization problem for minimum weight is solved subject to a design constraint on element reliability index. The methodology, solution procedure and optimization results are included in this report.

The persistence of the attentional bias to regularities in a changing environment.

PubMed

Yu, Ru Qi; Zhao, Jiaying

2015-10-01

The environment often is stable, but some aspects may change over time. The challenge for the visual system is to discover and flexibly adapt to the changes. We examined how attention is shifted in the presence of changes in the underlying structure of the environment. In six experiments, observers viewed four simultaneous streams of objects while performing a visual search task. In the first half of each experiment, the stream in the structured location contained regularities, the shapes in the random location were randomized, and gray squares appeared in two neutral locations. In the second half, the stream in the structured or the random location may change. In the first half of all experiments, visual search was facilitated in the structured location, suggesting that attention was consistently biased toward regularities. In the second half, this bias persisted in the structured location when no change occurred (Experiment 1), when the regularities were removed (Experiment 2), or when new regularities embedded in the original or novel stimuli emerged in the previously random location (Experiments 3 and 6). However, visual search was numerically but no longer reliably faster in the structured location when the initial regularities were removed and new regularities were introduced in the previously random location (Experiment 4), or when novel random stimuli appeared in the random location (Experiment 5). This suggests that the attentional bias was weakened. Overall, the results demonstrate that the attentional bias to regularities was persistent but also sensitive to changes in the environment.

Development of a real-time bridge structural monitoring and warning system: a case study in Thailand

NASA Astrophysics Data System (ADS)

Khemapech, I.; Sansrimahachai, W.; Toachoodee, M.

2017-04-01

Regarded as one of the physical aspects under societal and civil development and evolution, engineering structure is required to support growth of the nation. It also impacts life quality and safety of the civilian. Despite of its own weight (dead load) and live load, structural members are also significantly affected by disaster and environment. Proper inspection and detection are thus crucial both during regular and unsafe events. An Enhanced Structural Health Monitoring System Using Stream Processing and Artificial Neural Network Techniques (SPANNeT) has been developed and is described in this paper. SPANNeT applies wireless sensor network, real-time data stream processing and artificial neural network based upon the measured bending strains. Major contributions include an effective, accurate and energy-aware data communication and damage detection of the engineering structure. Strain thresholds have been defined according to computer simulation results and the AASHTO (American Association of State Highway and Transportation Officials) LRFD (Load and Resistance Factor Design) Bridge Design specifications for launching several warning levels. SPANNeT has been tested and evaluated by means of computer-based simulation and on-site levels. According to the measurements, the observed maximum values are 25 to 30 microstrains during normal operation. The given protocol provided at least 90% of data communication reliability. SPANNeT is capable of real-time data report, monitoring and warning efficiently conforming to the predefined thresholds which can be adjusted regarding user's requirements and structural engineering characteristics.

Inferring the mesoscale structure of layered, edge-valued, and time-varying networks

NASA Astrophysics Data System (ADS)

Peixoto, Tiago P.

2015-10-01

Many network systems are composed of interdependent but distinct types of interactions, which cannot be fully understood in isolation. These different types of interactions are often represented as layers, attributes on the edges, or as a time dependence of the network structure. Although they are crucial for a more comprehensive scientific understanding, these representations offer substantial challenges. Namely, it is an open problem how to precisely characterize the large or mesoscale structure of network systems in relation to these additional aspects. Furthermore, the direct incorporation of these features invariably increases the effective dimension of the network description, and hence aggravates the problem of overfitting, i.e., the use of overly complex characterizations that mistake purely random fluctuations for actual structure. In this work, we propose a robust and principled method to tackle these problems, by constructing generative models of modular network structure, incorporating layered, attributed and time-varying properties, as well as a nonparametric Bayesian methodology to infer the parameters from data and select the most appropriate model according to statistical evidence. We show that the method is capable of revealing hidden structure in layered, edge-valued, and time-varying networks, and that the most appropriate level of granularity with respect to the additional dimensions can be reliably identified. We illustrate our approach on a variety of empirical systems, including a social network of physicians, the voting correlations of deputies in the Brazilian national congress, the global airport network, and a proximity network of high-school students.

Gearbox Reliability Collaborative Gearbox 3 Planet Bearing Calibration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, Jonathan

2017-03-24

The Gearbox Reliability Collaborative gearbox was redesigned to improve its load-sharing characteristics and predicted fatigue life. The most important aspect of the redesign was to replace the cylindrical roller bearings with preloaded tapered roller bearings in the planetary section. Similar to previous work, the strain gages installed on the planet tapered roller bearings were calibrated in a load frame. This report describes the calibration tests and provides the factors necessary to convert the measured units from dynamometer testing to bearing loads, suitable for comparison to engineering models.

Quality assessment and control of finite element solutions

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Babuska, Ivo

1987-01-01

Status and some recent developments in the techniques for assessing the reliability of finite element solutions are summarized. Discussion focuses on a number of aspects including: the major types of errors in the finite element solutions; techniques used for a posteriori error estimation and the reliability of these estimators; the feedback and adaptive strategies for improving the finite element solutions; and postprocessing approaches used for improving the accuracy of stresses and other important engineering data. Also, future directions for research needed to make error estimation and adaptive movement practical are identified.

Probabilistic simulation of uncertainties in thermal structures

NASA Technical Reports Server (NTRS)

Chamis, Christos C.; Shiao, Michael

1990-01-01

Development of probabilistic structural analysis methods for hot structures is a major activity at Lewis Research Center. It consists of five program elements: (1) probabilistic loads; (2) probabilistic finite element analysis; (3) probabilistic material behavior; (4) assessment of reliability and risk; and (5) probabilistic structural performance evaluation. Recent progress includes: (1) quantification of the effects of uncertainties for several variables on high pressure fuel turbopump (HPFT) blade temperature, pressure, and torque of the Space Shuttle Main Engine (SSME); (2) the evaluation of the cumulative distribution function for various structural response variables based on assumed uncertainties in primitive structural variables; (3) evaluation of the failure probability; (4) reliability and risk-cost assessment, and (5) an outline of an emerging approach for eventual hot structures certification. Collectively, the results demonstrate that the structural durability/reliability of hot structural components can be effectively evaluated in a formal probabilistic framework. In addition, the approach can be readily extended to computationally simulate certification of hot structures for aerospace environments.

Publishing nutrition research: validity, reliability, and diagnostic test assessment in nutrition-related research.

PubMed

Gleason, Philip M; Harris, Jeffrey; Sheean, Patricia M; Boushey, Carol J; Bruemmer, Barbara

2010-03-01

This is the sixth in a series of monographs on research design and analysis. The purpose of this article is to describe and discuss several concepts related to the measurement of nutrition-related characteristics and outcomes, including validity, reliability, and diagnostic tests. The article reviews the methodologic issues related to capturing the various aspects of a given nutrition measure's reliability, including test-retest, inter-item, and interobserver or inter-rater reliability. Similarly, it covers content validity, indicators of absolute vs relative validity, and internal vs external validity. With respect to diagnostic assessment, the article summarizes the concepts of sensitivity and specificity. The hope is that dietetics practitioners will be able to both use high-quality measures of nutrition concepts in their research and recognize these measures in research completed by others. Copyright 2010 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

Reliability of adherence and competence assessment in cognitive behavioral therapy: influence of clinical experience.

PubMed

Weck, Florian; Hilling, Christine; Schermelleh-Engel, Karin; Rudari, Visar; Stangier, Ulrich

2011-04-01

The use of highly experienced expert judges was suggested for the assessment of therapists' adherence and competence. However, such an approach implies high costs. It can be questioned whether only experts are able to evaluate therapists' adherence and competence reliably. To test this, 4 judges evaluated therapist adherence and competence in 30 randomly selected videotapes of cognitive therapy sessions for depression. In that, 2 judges exhibited high clinical experience (experts), whereas 2 judges did not (novices). We could demonstrate that novices evaluated an aggregated adherence and competence measure with high reliability. However, several adherence and competence aspects were not assessed with satisfactory reliability by novices. Although adherence ratings of experts and novices showed high concordance, the concordance of competence ratings was only moderate. Results revealed that therapists' adherence could be evaluated satisfactorily by trained novices with some restrictions, but not their competence.

Multiscale Pores in TBCs for Lower Thermal Conductivity

NASA Astrophysics Data System (ADS)

Zhang, Wei-Wei; Li, Guang-Rong; Zhang, Qiang; Yang, Guan-Jun

2017-08-01

The morphology and pattern (including orientation and aspect ratio) of pores in thermal barrier coatings (TBCs) significantly affect their thermal insulation performance. In this work, finite element analysis was used to comprehensively understand the thermal insulation effect of pores and correlate the effective thermal conductivity with the structure. The results indicated that intersplat pores, and in particular their aspect ratio, dominantly affect the heat transfer in the top coat. The effective thermal conductivity decreased as a function of aspect ratio, since a larger aspect ratio often corresponds to a greater proportion of effective length of the pores. However, in conventional plasma-sprayed TBCs, intersplat pores often fail to maximize thermal insulation due to their distinct lower aspect ratios. Therefore, considering this effect of aspect ratio, a new structure design with multiscale pores is proposed and a corresponding structural model developed to correlate the thermal properties with this pore-rich structure. The predictions of the model are well consistent with experimental data. This study provides comprehensive understanding of the effect of pores on the thermal insulation performance, shedding light on the possibility of structural tailoring to obtain advanced TBCs with lower thermal conductivity.

Developing self-concept instrument for pre-service mathematics teachers

NASA Astrophysics Data System (ADS)

Afgani, M. W.; Suryadi, D.; Dahlan, J. A.

2018-01-01

This study aimed to develop self-concept instrument for undergraduate students of mathematics education in Palembang, Indonesia. Type of this study was development research of non-test instrument in questionnaire form. A Validity test of the instrument was performed with construct validity test by using Pearson product moment and factor analysis, while reliability test used Cronbach’s alpha. The instrument was tested by 65 undergraduate students of mathematics education in one of the universities at Palembang, Indonesia. The instrument consisted of 43 items with 7 aspects of self-concept, that were the individual concern, social identity, individual personality, view of the future, the influence of others who become role models, the influence of the environment inside or outside the classroom, and view of the mathematics. The result of validity test showed there was one invalid item because the value of Pearson’s r was 0.107 less than the critical value (0.244; α = 0.05). The item was included in social identity aspect. After the invalid item was removed, Construct validity test with factor analysis generated only one factor. The Kaiser-Meyer-Olkin (KMO) coefficient was 0.846 and reliability coefficient was 0.91. From that result, we concluded that the self-concept instrument for undergraduate students of mathematics education in Palembang, Indonesia was valid and reliable with 42 items.

PLD deposition of tungsten carbide contact for diamond photodiodes. Influence of process conditions on electronic and chemical aspects

NASA Astrophysics Data System (ADS)

Cappelli, E.; Bellucci, A.; Orlando, S.; Trucchi, D. M.; Mezzi, A.; Valentini, V.

2013-08-01

Tungsten carbide, WC, contacts behave as very reliable Schottky contacts for opto-electronic diamond devices. Diamond is characterized by superior properties in high-power, high frequency and high-temperature applications, provided that thermally stable electrode contacts will be realized. Ohmic contacts can be easily achieved by using carbide-forming metals, while is difficult to get stable Schottky contacts at elevated temperatures, due to the interface reaction and/or inter-diffusion between metals and diamond. Novel type of contacts, made of tungsten carbide, WC, seem to be the best solution, for their excellent thermal stability, high melting point, oxidation and radiation resistance and good electrical conductivity. Our research was aimed at using pulsed laser deposition for WC thin film deposition, optimizing experimental parameters, to obtain a final device characterized by excellent electronic properties, as a detector for radiation in deep UV or as X-ray dosimeter. We deposited our films by laser ablation from a target of pure WC, using different reaction conditions (i.e., substrate heating, vacuum or reactive atmosphere (CH4/Ar), RF plasma activated), to optimize both the stoichiometry of the film and its structure. Trying to obtain a material with the best electronic response, we used also two sources of laser radiation for target ablation, i.e., nano-second pulsed excimer laser ArF, and ultra-short fs Ti:Sapphire laser. The structure and chemical aspects have been evaluated by Raman and X-ray photoelectron spectroscopy (XPS), while the dosimeter photodiode response has been tested by the I-V measurements, under soft X-ray irradiation.

Psychometric evaluation of the Forensic Inpatient Observation Scale (FIOS) in youngsters with a judicial measure

PubMed Central

2011-01-01

Background In this article, the psychometric properties of the Forensic Inpatient Observation Scale (FIOS) were examined. This instrument was developed to observe behavioral functioning of forensic psychiatric patients. Up till now, it has only been used among adult forensic psychiatric patients and this is the first study in which the FIOS is used with youngsters. Methods Data were gathered of 133 patients. The FIOS was routinely used to assess the psychiatric condition of youngsters at fixed intervals with a three-month time period between each measurement. Ward staff working in close contact with the patient conducted the assessments. Of these 133 patients, an YSR/ASR questionnaire was available for 96 of them and a TRF for 110 of the 133 patients. For the descriptive, reliability and validity analyses, SPSS version 16.0 was used. Factor analyses were performed by means of Mplus Version 5.2. Results A series of confirmatory and exploratory factor analyses revealed a five-factor structure for the FIOS. The five-factor structure consisted of the following scales: self-care, social behavior, oppositional behavior, verbal skills and distress. The insight scale of the original factor structure could not be replicated in the youth sample. Cronbach's alpha's of the five scales ranged from .70 to .85. The self-care, verbal skills and oppositional behavior scales of the FIOS showed no relation with emotional and behavior problems reported by the patients themselves or their teachers. The distress scale of the FIOS did show a relation with the emotional problems reported by patients themselves and the social behavior scale with behavioral problems as reported by teachers. Conclusions The internal consistency of the FIOS was sufficient and the factor structure in the present sample of youngsters was in general comparable to the original factor structure in an adult sample. Its value lies in the focus on behavioral functioning of youngsters with judicial measures. What remains to be seen is whether this instrument is sensitive enough to register all aspects of behavioral changes, whether the interrater reliability is sufficient, and whether it has predictive validity to relapse and recidivism. PMID:21951650

WSi2/Si multilayer sectioning by reactive ion etching for multilayer Laue lens fabrication

NASA Astrophysics Data System (ADS)

Bouet, N.; Conley, R.; Biancarosa, J.; Divan, R.; Macrander, A. T.

2010-09-01

Reactive ion etching (RIE) has been employed in a wide range of fields such as semiconductor fabrication, MEMS (microelectromechanical systems), and refractive x-ray optics with a large investment put towards the development of deep RIE. Due to the intrinsic differing chemistries related to reactivity, ion bombardment, and passivation of materials, the development of recipes for new materials or material systems can require intense effort and resources. For silicon in particular, methods have been developed to provide reliable anisotropic profiles with good dimensional control and high aspect ratios1,2,3, high etch rates, and excellent material to mask etch selectivity. A multilayer Laue lens4 is an x-ray focusing optic, which is produced by depositing many layers of two materials with differing electron density in a particular stacking sequence where the each layer in the stack satisfies the Fresnel zone plate law. When this stack is sectioned to allow side-illumination with radiation, the diffracted exiting radiation will constructively interfere at the focal point. Since the first MLLs were developed at Argonne in the USA in 20064, there have been published reports of MLL development efforts in Japan5, and, very recently, also in Germany6. The traditional technique for sectioning multilayer Laue lens (MLL) involves mechanical sectioning and polishing7, which is labor intensive and can induce delamination or structure damage and thereby reduce yield. If a non-mechanical technique can be used to section MLL, it may be possible to greatly shorten the fabrication cycle, create more usable optics from the same amount of deposition substrate, and perhaps develop more advanced structures to provide greater stability or flexibility. Plasma etching of high aspect-ratio multilayer structures will also expand the scope for other types of optics fabrication (such as gratings, zone plates, and so-on). However, well-performing reactive ion etching recipes have been developed for only a small number of materials, and even less recipes exist for concurrent etching of more than one element so a fully material specific process needs to be developed. In this paper, sectioning of WSi2/Si multilayers for MLL fabrication using fluorinated gases is investigated. The main goals were to demonstrate the feasibility of this technique, achievement of high anisotropy, adequate sidewall roughness control and high etching rates. We note that this development for MLL sidewalls should be distinguished from work on improving aspect ratios in traditional Fresnel zone plates. Aspect ratios for MLL sidewalls are not similarly constrained.

Addressing Uniqueness and Unison of Reliability and Safety for a Better Integration

NASA Technical Reports Server (NTRS)

Huang, Zhaofeng; Safie, Fayssal

2016-01-01

Over time, it has been observed that Safety and Reliability have not been clearly differentiated, which leads to confusion, inefficiency, and, sometimes, counter-productive practices in executing each of these two disciplines. It is imperative to address this situation to help Reliability and Safety disciplines improve their effectiveness and efficiency. The paper poses an important question to address, "Safety and Reliability - Are they unique or unisonous?" To answer the question, the paper reviewed several most commonly used analyses from each of the disciplines, namely, FMEA, reliability allocation and prediction, reliability design involvement, system safety hazard analysis, Fault Tree Analysis, and Probabilistic Risk Assessment. The paper pointed out uniqueness and unison of Safety and Reliability in their respective roles, requirements, approaches, and tools, and presented some suggestions for enhancing and improving the individual disciplines, as well as promoting the integration of the two. The paper concludes that Safety and Reliability are unique, but compensating each other in many aspects, and need to be integrated. Particularly, the individual roles of Safety and Reliability need to be differentiated, that is, Safety is to ensure and assure the product meets safety requirements, goals, or desires, and Reliability is to ensure and assure maximum achievability of intended design functions. With the integration of Safety and Reliability, personnel can be shared, tools and analyses have to be integrated, and skill sets can be possessed by the same person with the purpose of providing the best value to a product development.

Psychometric properties of a culture-adapted Spanish version of AIDA (Assessment of Identity Development in Adolescence) in Mexico.

PubMed

Kassin, Moises; De Castro, Filipa; Arango, Ivan; Goth, Kirstin

2013-01-01

The construct "identity" was discussed to be integrated as an important criterion for diagnosing personality disorders in DSM-5. According to Kernberg, identity diffusion is one of the relevant underlying structures in terms of personality organization for developing psychopathology, especially borderline personality disorder. Therefore, it would be important to differentiate healthy from pathological development already in adolescence. With the questionnaire termed AIDA (Assessment of Identity Development in Adolescence), a reliable and valid self-rating inventory was introduced by Goth, Foelsch, Schlueter-Mueller, & Schmeck (2012) to assess pathology-related identity development in healthy and disturbed adolescents. To test the usefulness of the questionnaire in Mexico, we contributed to the development of a culture-specific Spanish translation of AIDA and tested the reliability and aspects of validity of the questionnaire in a juvenile Mexican sample. An adapted Spanish translation of AIDA was developed by an expert panel from Chile, Mexico, and Spain in cooperation with the original authors, focusing on content equivalence and comprehensibility by considering specific idioms, life circumstances, and culture-specific aspects. The psychometric properties of the Spanish version were first tested in Mexico. Participants were 265 students from a state school (N = 110) and private school (N = 155), aged between 12 and 19 years (mean 14.15 years). Of these, 44.9% were boys and 55.1% were girls. Item characteristics were analyzed by several parameters, scale reliability by Cronbach's Alpha, and systematic effects of gender, age, and socioeconomics by an analysis of variance (ANOVA). We evaluated aspects of criterion validity in a juvenile justice system sample (N = 41) of adolescent boys in conflict with the law who displayed various types of behavioral problems by comparing the AIDA scores of a subgroup with signs for borderline pathology (N = 14) with the scores obtained in the student sample using T-tests. The psychometric properties of the Spanish version of AIDA proved satisfactory in the Mexican sample for items as well as scales. The reliability coefficients were α = .94 for the total scale "Identity Diffusion", α = .85 and .92 for the two primary scales "Discontinuity" and "Incoherence", and between α = .70 and .83 for the subscales. However, some items of the item pool in the Spanish version of AIDA did not meet all criteria for test equivalence and should thus be reformulated, taking the Mexican culture into account. Significant effects for gender and age were found. In line with our theory, the AIDA scores in the domains "Discontinuity" (high effect size) and "Incoherence" (medium effect size) were markedly higher in the delinquent boys than in the student group. The Spanish version of AIDA can be used in Mexico with satisfying psychometric properties, with only minor adaptions required. Our study contributes to the intercultural applicability of the AIDA instrument using the construct "identity integration vs. diffusion" as it was defined in the AIDA model for diagnostic purposes. Cultural differences, even those present in the various Spanish-speaking countries, should be modeled carefully.

Psychometric properties of a culture-adapted Spanish version of AIDA (Assessment of Identity Development in Adolescence) in Mexico

PubMed Central

2013-01-01

Background The construct “identity” was discussed to be integrated as an important criterion for diagnosing personality disorders in DSM-5. According to Kernberg, identity diffusion is one of the relevant underlying structures in terms of personality organization for developing psychopathology, especially borderline personality disorder. Therefore, it would be important to differentiate healthy from pathological development already in adolescence. With the questionnaire termed AIDA (Assessment of Identity Development in Adolescence), a reliable and valid self-rating inventory was introduced by Goth, Foelsch, Schlueter-Mueller, & Schmeck (2012) to assess pathology-related identity development in healthy and disturbed adolescents. To test the usefulness of the questionnaire in Mexico, we contributed to the development of a culture-specific Spanish translation of AIDA and tested the reliability and aspects of validity of the questionnaire in a juvenile Mexican sample. Methods An adapted Spanish translation of AIDA was developed by an expert panel from Chile, Mexico, and Spain in cooperation with the original authors, focusing on content equivalence and comprehensibility by considering specific idioms, life circumstances, and culture-specific aspects. The psychometric properties of the Spanish version were first tested in Mexico. Participants were 265 students from a state school (N = 110) and private school (N = 155), aged between 12 and 19 years (mean 14.15 years). Of these, 44.9% were boys and 55.1% were girls. Item characteristics were analyzed by several parameters, scale reliability by Cronbach’s Alpha, and systematic effects of gender, age, and socioeconomics by an analysis of variance (ANOVA). We evaluated aspects of criterion validity in a juvenile justice system sample (N = 41) of adolescent boys in conflict with the law who displayed various types of behavioral problems by comparing the AIDA scores of a subgroup with signs for borderline pathology (N = 14) with the scores obtained in the student sample using T-tests. Results The psychometric properties of the Spanish version of AIDA proved satisfactory in the Mexican sample for items as well as scales. The reliability coefficients were α = .94 for the total scale “Identity Diffusion”, α = .85 and .92 for the two primary scales “Discontinuity” and “Incoherence”, and between α = .70 and .83 for the subscales. However, some items of the item pool in the Spanish version of AIDA did not meet all criteria for test equivalence and should thus be reformulated, taking the Mexican culture into account. Significant effects for gender and age were found. In line with our theory, the AIDA scores in the domains “Discontinuity” (high effect size) and “Incoherence” (medium effect size) were markedly higher in the delinquent boys than in the student group. Conclusion The Spanish version of AIDA can be used in Mexico with satisfying psychometric properties, with only minor adaptions required. Our study contributes to the intercultural applicability of the AIDA instrument using the construct “identity integration vs. diffusion” as it was defined in the AIDA model for diagnostic purposes. Cultural differences, even those present in the various Spanish-speaking countries, should be modeled carefully. PMID:23899385

Optical fiber repeatered transmission systems utilizing SAW filters

NASA Astrophysics Data System (ADS)

Rosenberg, R. L.; Ross, D. G.; Trischitta, P. R.; Fishman, D. A.; Armitage, C. B.

1983-05-01

Baseband digital transmission-line systems capable of signaling rates of several hundred to several thousand Mbit/s are presently being developed around the world. The pulse regeneration process is gated by a timing wave which is synchronous with the symbol rate of the arriving pulse stream. Synchronization is achieved by extracting a timing wave from the arriving pulse stream, itself. To date, surface acoustic-wave (SAW) filters have been widely adopted for timing recovery in the in-line regenerators of high-bit-rate systems. The present investigation has the objective to acquaint the SAW community in general, and SAW filter suppliers in particular, with the requirements for timing recovery filters in repeatered digital transmission systems. Attention is given to the system structure, the timing loop function, the system requirements affecting the timing-recovery filter, the decision process, timing jitter accumulation, the filter 'ringing' requirement, and aspects of reliability.

A Psychometric Evaluation of the Santa Clara Strength of Religious Faith Questionnaire among Students from Poland and Chile.

PubMed

Wnuk, Marcin

2017-01-01

This study verifies the psychometric properties of the Santa Clara Strength of Religious Faith Questionnaire (SCSORFQ). This measure consists of 10 items regarding strength of religious faith, regardless of religious denomination or affiliation. Participants were 177 students from Chile and 393 students from Poland. The SCSORFQ method is a reliable measure with good internal consistency evaluated by the α-Cronbach coefficient. Factor analysis statistically confirmed the unidimensional structure of the SCSORFQ. The strength of religious faith in both student groups was moderate to strong correlated with public or private aspects of religiousness and strong correlated with spiritual experiences. It was weakly correlated with the cognitive indicator of well-being as satisfaction with life as well as with existential variables like hope and meaning of life. The results confirm that the SCSORFQ is psychometrically sound and is therefore recommended for use by researchers studying the construct of religiousness.

High-Performance I/O: HDF5 for Lattice QCD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurth, Thorsten; Pochinsky, Andrew; Sarje, Abhinav

2015-01-01

Practitioners of lattice QCD/QFT have been some of the primary pioneer users of the state-of-the-art high-performance-computing systems, and contribute towards the stress tests of such new machines as soon as they become available. As with all aspects of high-performance-computing, I/O is becoming an increasingly specialized component of these systems. In order to take advantage of the latest available high-performance I/O infrastructure, to ensure reliability and backwards compatibility of data files, and to help unify the data structures used in lattice codes, we have incorporated parallel HDF5 I/O into the SciDAC supported USQCD software stack. Here we present the design andmore » implementation of this I/O framework. Our HDF5 implementation outperforms optimized QIO at the 10-20% level and leaves room for further improvement by utilizing appropriate dataset chunking.« less

An Advanced Hierarchical Hybrid Environment for Reliability and Performance Modeling

NASA Technical Reports Server (NTRS)

Ciardo, Gianfranco

2003-01-01

The key issue we intended to address in our proposed research project was the ability to model and study logical and probabilistic aspects of large computer systems. In particular, we wanted to focus mostly on automatic solution algorithms based on a state-space exploration as their first step, in addition to the more traditional discrete-event simulation approaches commonly employed in industry. One explicitly-stated goal was to extend by several orders of magnitude the size of models that can be solved exactly, using a combination of techniques: 1) Efficient exploration and storage of the state space using new data structures that require an amount of memory sublinear in the number states; and 2) Exploitation of the existing symmetries in the matrices describing the system behavior using Kronecker operators. Not only we have been successful in achieving the above goals, but we exceeded them in many respects.

Write-Read 3D Patterning with a Dual-Channel Nanopipette.

PubMed

Momotenko, Dmitry; Page, Ashley; Adobes-Vidal, Maria; Unwin, Patrick R

2016-09-27

Nanopipettes are becoming extremely versatile and powerful tools in nanoscience for a wide variety of applications from imaging to nanoscale sensing. Herein, the capabilities of nanopipettes to build complex free-standing three-dimensional (3D) nanostructures are demonstrated using a simple double-barrel nanopipette device. Electrochemical control of ionic fluxes enables highly localized delivery of precursor species from one channel and simultaneous (dynamic and responsive) ion conductance probe-to-substrate distance feedback with the other for reliable high-quality patterning. Nanopipettes with 30-50 nm tip opening dimensions of each channel allowed confinement of ionic fluxes for the fabrication of high aspect ratio copper pillar, zigzag, and Γ-like structures, as well as permitted the subsequent topographical mapping of the patterned features with the same nanopipette probe as used for nanostructure engineering. This approach offers versatility and robustness for high-resolution 3D "printing" (writing) and read-out at the nanoscale.

Computational challenges in atomic, molecular and optical physics.

PubMed

Taylor, Kenneth T

2002-06-15

Six challenges are discussed. These are the laser-driven helium atom; the laser-driven hydrogen molecule and hydrogen molecular ion; electron scattering (with ionization) from one-electron atoms; the vibrational and rotational structure of molecules such as H(3)(+) and water at their dissociation limits; laser-heated clusters; and quantum degeneracy and Bose-Einstein condensation. The first four concern fundamental few-body systems where use of high-performance computing (HPC) is currently making possible accurate modelling from first principles. This leads to reliable predictions and support for laboratory experiment as well as true understanding of the dynamics. Important aspects of these challenges addressable only via a terascale facility are set out. Such a facility makes the last two challenges in the above list meaningfully accessible for the first time, and the scientific interest together with the prospective role for HPC in these is emphasized.

A review of design issues specific to hypersonic flight vehicles

NASA Astrophysics Data System (ADS)

Sziroczak, D.; Smith, H.

2016-07-01

This paper provides an overview of the current technical issues and challenges associated with the design of hypersonic vehicles. Two distinct classes of vehicles are reviewed; Hypersonic Transports and Space Launchers, their common features and differences are examined. After a brief historical overview, the paper takes a multi-disciplinary approach to these vehicles, discusses various design aspects, and technical challenges. Operational issues are explored, including mission profiles, current and predicted markets, in addition to environmental effects and human factors. Technological issues are also reviewed, focusing on the three major challenge areas associated with these vehicles: aerothermodynamics, propulsion, and structures. In addition, matters of reliability and maintainability are also presented. The paper also reviews the certification and flight testing of these vehicles from a global perspective. Finally the current stakeholders in the field of hypersonic flight are presented, summarizing the active programs and promising concepts.

High-Performance I/O: HDF5 for Lattice QCD

DOE PAGES

Kurth, Thorsten; Pochinsky, Andrew; Sarje, Abhinav; ...

2017-05-09

Practitioners of lattice QCD/QFT have been some of the primary pioneer users of the state-of-the-art high-performance-computing systems, and contribute towards the stress tests of such new machines as soon as they become available. As with all aspects of high-performance-computing, I/O is becoming an increasingly specialized component of these systems. In order to take advantage of the latest available high-performance I/O infrastructure, to ensure reliability and backwards compatibility of data files, and to help unify the data structures used in lattice codes, we have incorporated parallel HDF5 I/O into the SciDAC supported USQCD software stack. Here we present the design andmore » implementation of this I/O framework. Our HDF5 implementation outperforms optimized QIO at the 10-20% level and leaves room for further improvement by utilizing appropriate dataset chunking.« less

The Current State of Silicone-Based Dielectric Elastomer Transducers.

PubMed

Madsen, Frederikke B; Daugaard, Anders E; Hvilsted, Søren; Skov, Anne L

2016-03-01

Silicone elastomers are promising materials for dielectric elastomer transducers (DETs) due to their superior properties such as high efficiency, reliability and fast response times. DETs consist of thin elastomer films sandwiched between compliant electrodes, and they constitute an interesting class of transducer due to their inherent lightweight and potentially large strains. For the field to progress towards industrial implementation, a leap in material development is required, specifically targeting longer lifetime and higher energy densities to provide more efficient transduction at lower driving voltages. In this review, the current state of silicone elastomers for DETs is summarised and critically discussed, including commercial elastomers, composites, polymer blends, grafted elastomers and complex network structures. For future developments in the field it is essential that all aspects of the elastomer are taken into account, namely dielectric losses, lifetime and the very often ignored polymer network integrity and stability. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Urban environment and well-being: cross-cultural studies on Perceived Residential Environment Quality Indicators (PREQIs).

PubMed

Bonaiuto, Marino; Fornara, Ferdinando; Alves, Susana; Ferreira, Ines; Mao, Yanhui; Moffat, Eva; Piccinin, Gloria; Rahimi, Leila

2015-09-01

Architectural and environmental psychology literature has shown the importance of urban design in provoking stress feelings or enhancing well-being and quality of life. The aim of this contribution is to show the main results of a set of cross-cultural survey studies concerning the perceived quality of urban features at the neighbourhood level. A questionnaire was used including the extended or the short version of the 11 scales measuring Perceived Residential Environment Quality Indicators (PREQIs), which cover architectural, social, functional, and contextual aspects. Both versions of PREQIs showed a similar factorial structure and a good (or at least acceptable) reliability across different geographical contexts, even though some differences emerged in those countries that are more distant from the Western linguistic and cultural milieu. The development of tools like PREQIs should increase a "user-centred" vision on urban issues.

Uncertainty and Risk Assessment in the Design Process for Wind

DOE Office of Scientific and Technical Information (OSTI.GOV)

Damiani, Rick R.

This report summarizes the concepts and opinions that emerged from an initial study on the subject of uncertainty in wind design that included expert elicitation during a workshop held at the National Wind Technology Center at the National Renewable Energy Laboratory July 12-13, 2016. In this paper, five major categories of uncertainties are identified. The first category is associated with direct impacts on turbine loads, (i.e., the inflow including extreme events, aero-hydro-servo-elastic response, soil-structure inter- action, and load extrapolation). The second category encompasses material behavior and strength. Site suitability and due-diligence aspects pertain to the third category. Calibration of partialmore » safety factors and optimal reliability levels make up the fourth one. And last but not least, is the category associated with uncertainties in computational modeling. The main sections of this paper follow this organization.« less

NASA Engineering and Technology Advancement Office: A proposal to the administrator

NASA Technical Reports Server (NTRS)

Schulze, Norman R.

1993-01-01

NASA has continually had problems with cost, schedule, performance, reliability, quality, and safety aspects in programs. Past solutions have not provided the answers needed, and a major change is needed in the way of doing business. A new approach is presented for consideration. These problems are all engineering matters, and therefore, require engineering solutions. Proper engineering tools are needed to fix engineering problems. Headquarters is responsible for providing the management structure to support programs with appropriate engineering tools. A guide to define those tools and an approach for putting them into place is provided. Recommendations include establishing a new Engineering and Technology Advancement Office, requesting a review of this proposal by the Administrator since this subject requires a top level decision. There has been a wide peer review conducted by technical staff at Headquarters, the Field Installations, and others in industry as discussed.

Process for Biotransformation of Androsta-4-ene-3, 17-Dione (4-AD) to Androsta-1,4-Diene-3,17-Dione (ADD).

PubMed

Prakash, Surya; Bajaj, Abhay

2017-01-01

Androsta-1,4-diene-3,17-dione (androstadienedione, ADD) is key intermediate for the organic synthesis of a variety of female sex hormones such as estrone, estradiol, estriol and other related derivatives. De novo synthesis of this molecule is not yet reported in any form of living system, i.e., microbial, plant, and animal. The structural complexities due to presence of several chiral carbon centers create significant hurdles in chemical synthesis of such molecules. Microbe-mediated biotransformation offer a highly reliable, cost-effective, and relatively non hazardous way for commercial manufacturing of steroidal key intermediates. Currently microbial biotransformations are extensively being exploited for large-scale production of basic intermediates such as androstenedione (AD), ADD, and several types of hydroxylated derivatives of androstane compounds. In this chapter several aspects of microbial biotransformation process of AD to ADD are discussed.

[Quality assurance of the renal applications software].

PubMed

del Real Núñez, R; Contreras Puertas, P I; Moreno Ortega, E; Mena Bares, L M; Maza Muret, F R; Latre Romero, J M

2007-01-01

The need for quality assurance of all technical aspects of nuclear medicine studies is widely recognised. However, little attention has been paid to the quality assurance of the applications software. Our work reported here aims at verifying the analysis software for processing of renal nuclear medicine studies (renograms). The software tools were used to build a synthetic dynamic model of renal system. The model consists of two phases: perfusion and function. The organs of interest (kidneys, bladder and aortic artery) were simple geometric forms. The uptake of the renal structures was described by mathematic functions. Curves corresponding to normal or pathological conditions were simulated for kidneys, bladder and aortic artery by appropriate selection of parameters. There was no difference between the parameters of the mathematic curves and the quantitative data produced by the renal analysis program. Our test procedure is simple to apply, reliable, reproducible and rapid to verify the renal applications software.

Insights from industry: a quantitative analysis of engineers' perceptions of empathy and care within their practice

NASA Astrophysics Data System (ADS)

Hess, Justin L.; Strobel, Johannes; Pan, Rui Celia; Wachter Morris, Carrie A.

2017-11-01

This study focuses on two seldom-investigated skills or dispositions aligned with engineering habits of mind - empathy and care. In order to conduct quantitative research, we designed, explored the underlying structure of, validated, and tested the reliability of the Empathy and Care Questionnaire (ECQ), a new psychometric instrument. In the second part, we used the ECQ to explore the perceptions of empathy and care of alumni/ae of an internationally ranked US institution, along with how perceptions differed by work experience and gender. Results show that participants perceived empathy and care to be important in multiple respects, most notably in relational aspects of engineering practice. Engineers with more engineering experience were more likely to perceive empathy and care as existing in engineering practice and as important to their work. While these phenomena are sometimes depicted as feminine qualities, we found no gender differences among our respondents.

Development of a questionnaire to evaluate coping strategies for skin problems.

PubMed

Hernández-Fernaud, Estefanía; Hernández, Bernardo; Ruiz, Cristina; Ruiz, Antonia

2009-05-01

The aim of this work was to develop an instrument (Coping Strategies for Skin Problems Questionnaire) suitable for identifying the coping strategies people use for general skin problems. We analyzed its psychometric properties when applied to a sample of 299 individuals. Factor analysis shows a 6-factor structure referring to the wish to change, problem-solving strategies, the search for information and asking for social support, the ability to distance oneself from the problem and to see the positive aspects of the situation. These factors explain 60.77% of the variance and show an internal consistency higher than 0.67. We analyse the validity of the questionnaire and identify different coping profiles depending on the degree of skin damage as assessed by the participants and their search for health services. According to the psychometric properties obtained, we conclude that our instrument is valid and reliable for use with people presenting skin problems.

Robotic Assembly of Truss Structures for Space Systems and Future Research Plans

NASA Technical Reports Server (NTRS)

Doggett, William

2002-01-01

Many initiatives under study by both the space science and earth science communities require large space systems, i.e. with apertures greater than 15 m or dimensions greater than 20 m. This paper reviews the effort in NASA Langley Research Center's Automated Structural Assembly Laboratory which laid the foundations for robotic construction of these systems. In the Automated Structural Assembly Laboratory reliable autonomous assembly and disassembly of an 8 meter planar structure composed of 102 truss elements covered by 12 panels was demonstrated. The paper reviews the hardware and software design philosophy which led to reliable operation during weeks of near continuous testing. Special attention is given to highlight the features enhancing assembly reliability.

Scheduling structural health monitoring activities for optimizing life-cycle costs and reliability of wind turbines

NASA Astrophysics Data System (ADS)

Hanish Nithin, Anu; Omenzetter, Piotr

2017-04-01

Optimization of the life-cycle costs and reliability of offshore wind turbines (OWTs) is an area of immense interest due to the widespread increase in wind power generation across the world. Most of the existing studies have used structural reliability and the Bayesian pre-posterior analysis for optimization. This paper proposes an extension to the previous approaches in a framework for probabilistic optimization of the total life-cycle costs and reliability of OWTs by combining the elements of structural reliability/risk analysis (SRA), the Bayesian pre-posterior analysis with optimization through a genetic algorithm (GA). The SRA techniques are adopted to compute the probabilities of damage occurrence and failure associated with the deterioration model. The probabilities are used in the decision tree and are updated using the Bayesian analysis. The output of this framework would determine the optimal structural health monitoring and maintenance schedules to be implemented during the life span of OWTs while maintaining a trade-off between the life-cycle costs and risk of the structural failure. Numerical illustrations with a generic deterioration model for one monitoring exercise in the life cycle of a system are demonstrated. Two case scenarios, namely to build initially an expensive and robust or a cheaper but more quickly deteriorating structures and to adopt expensive monitoring system, are presented to aid in the decision-making process.

Biomimetics of fetal alveolar flow phenomena using microfluidics.

PubMed

Tenenbaum-Katan, Janna; Fishler, Rami; Rothen-Rutishauser, Barbara; Sznitman, Josué

2015-01-01

At the onset of life in utero, the respiratory system begins as a liquid-filled tubular organ and undergoes significant morphological changes during fetal development towards establishing a respiratory organ optimized for gas exchange. As airspace morphology evolves, respiratory alveolar flows have been hypothesized to exhibit evolving flow patterns. In the present study, we have investigated flow topologies during increasing phases of embryonic life within an anatomically inspired microfluidic device, reproducing real-scale features of fetal airways representative of three distinct phases of in utero gestation. Micro-particle image velocimetry measurements, supported by computational fluid dynamics simulations, reveal distinct respiratory alveolar flow patterns throughout different stages of fetal life. While attached, streamlined flows characterize the shallow structures of premature alveoli indicative of the onset of saccular stage, separated recirculating vortex flows become the signature of developed and extruded alveoli characteristic of the advanced stages of fetal development. To further mimic physiological aspects of the cellular environment of developing airways, our biomimetic devices integrate an alveolar epithelium using the A549 cell line, recreating a confluent monolayer that produces pulmonary surfactant. Overall, our in vitro biomimetic fetal airways model delivers a robust and reliable platform combining key features of alveolar morphology, flow patterns, and physiological aspects of fetal lungs developing in utero.

Research activities in the field of human factors: Evaluation and prospects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larchier-Boulanger, J.; Grosdeva, T.

1988-01-01

The industrial systems are sociotechnical i.e., conceived, directed, checked, run, and repaired by individuals belonging to structured organizations for either individual or group work. Hence, a better understanding of how their behavior, competences, and know-how is a must. At the DER and ESF department human factors group is given the mission to enlarge, through a pluridisciplinary approach, the knowledge of human factors in complex systems. Human interventions are analyzed both for their positive aspects (competences and know-how to retrieve complex situations) and their negative aspects (human weaknesses). For safety reasons such analyses are mainly directed toward the nuclear plant operators,more » considered individually (intervening of one operator) or as a team (group behavior). The aims of the studies on human factors are various, and such studies justify the research in this field. They make it possible, through a better consideration of the variables specific to individuals, to bring to the enterprise means for: (1) increasing reliability and helping performance, (2) improving the adjustment of work demands to the real environment, and (3) creating a better energy between the individual and his/her enterprise. The variables specific to human factors that keep developing thus the perspectives for research, in this field, are to recenter and redefine the undertaken studies.« less

Practical Aspects of Suspension Plasma Spray for Thermal Barrier Coatings on Potential Gas Turbine Components

NASA Astrophysics Data System (ADS)

Ma, X.; Ruggiero, P.

2018-04-01

Suspension plasma spray (SPS) process has attracted extensive efforts and interests to produce fine-structured and functional coatings. In particular, thermal barrier coatings (TBCs) applied by SPS process gain increasing interest due to its potential for superior thermal protection of gas turbine hot sections as compared to conventional TBCs. Unique columnar architectures and nano- and submicrometric grains in the SPS-TBC demonstrated some advantages of thermal shock durability, low thermal conductivity, erosion resistance and strain-tolerant microstructure. This work aimed to look into some practical aspects of SPS processing for TBC applications before it becomes a reliable industry method. The spray capability and applicability of SPS process to achieve uniformity thickness and microstructure on curved substrates were emphasized in designed spray trials to simulate the coating fabrication onto industrial turbine parts with complex configurations. The performances of the SPS-TBCs were tested in erosion, falling ballistic impact and indentational loading tests as to evaluate SPS-TBC performances in simulated turbine service conditions. Finally, a turbine blade was coated and sectioned to verify SPS sprayability in multiple critical sections. The SPS trials and test results demonstrated that SPS process is promising for innovative TBCs, but some challenges need to be addressed and resolved before it becomes an economic and capable industrial process, especially for complex turbine components.

Synthetic Cannabinoids: Psychopharmacology, Clinical Aspects, Psychotic Onset.

PubMed

Martinotti, Giovanni; Santacroce, Rita; Papanti, Duccio; Elgharably, Yasmine; Prilutskaya, Mariya; Corazza, Ornella

2017-01-01

Synthetic Cannabinoids (SC) are the widest and most diffused class of Novel Psychoactive Substances. The short- and long- term health risks associated with the consumption of SC are often unknown to both users and health professionals. This review aims to provide a synthesis of the most recent and relevant insights on the pharmacology, clinical and psychopathological aspects of SC. A structured search of two bibliographic databases (PubMed and Scopus) was undertaken according to inclusion/exclusion criteria. The following terms "synthetic cannabinoid*", "synthetic cannabimimetic*", "synthetic cannabis", "synthetic marijuana" and "Spice AND cannabinoid*" were used as search strings. 162 relevant results, mainly published in the past two years were revealed. Most results emerged for the keyword "synthetic cannabinoid*", followed by the combination "Spice* AND "cannabinoid*". Most papers were epidemiological, forensic, toxicologic, or analytical. The results of studies were systematized according their contribution to the comprehension of pharmacological, clinical and psychopathological effects of SC. Fifteen SC-related fatality cases were reviewed according to their histories, pathology and toxicology findings. The findings of this review confirm the importance of prompt and reliable information available for health professionals More specific analytic techniques and designed preventive strategies are required to face unprecedented SC challenge. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Coarse Grained Model for Biological Simulations: Recent Refinements and Validation

PubMed Central

Vicatos, Spyridon; Rychkova, Anna; Mukherjee, Shayantani; Warshel, Arieh

2014-01-01

Exploring the free energy landscape of proteins and modeling the corresponding functional aspects presents a major challenge for computer simulation approaches. This challenge is due to the complexity of the landscape and the enormous computer time needed for converging simulations. The use of various simplified coarse grained (CG) models offers an effective way of sampling the landscape, but most current models are not expected to give a reliable description of protein stability and functional aspects. The main problem is associated with insufficient focus on the electrostatic features of the model. In this respect our recent CG model offers significant advantage as it has been refined while focusing on its electrostatic free energy. Here we review the current state of our model, describing recent refinement, extensions and validation studies while focusing on demonstrating key applications. These include studies of protein stability, extending the model to include membranes and electrolytes and electrodes as well as studies of voltage activated proteins, protein insertion trough the translocon, the action of molecular motors and even the coupling of the stalled ribosome and the translocon. Our example illustrates the general potential of our approach in overcoming major challenges in studies of structure function correlation in proteins and large macromolecular complexes. PMID:25050439

Evaluation of a magnetic resonance-compatible dentoalveolar tactile stimulus device.

PubMed

Moana-Filho, Estephan J; Nixdorf, Donald R; Bereiter, David A; John, Mike T; Harel, Noam

2010-10-28

Few methods exist to study central nervous system processes following dentoalveolar tactile stimulation using functional magnetic resonance imaging (fMRI), likely due to inherent technical difficulties. Our primary goal was to develop and perform feasibility testing of a novel device capable of delivering valid and reliable dentoalveolar stimuli at dental chair-side and during MRI. Details of a device designed to deliver dentoalveolar dynamic pressure stimuli are described. Device testing took place in three settings: a) laboratory testing to assess range of stimulus force intensities, b) dental chair-side to assess reliability, validity and discriminant ability in force-pain relationship; and c) MRI to evaluate magnetic compatibility and ability to evoke brain activation in painfree subjects similar to those described in the literature. A novel device capable of delivering valid and reliable dentoalveolar somatosensory stimulation was developed (ICC = 0.89, 0.78-1 [95% CI]). Psychophysical data analysis showed high discriminant ability in differentiating painfree controls from cases with chronic dentoalveolar pain related to deafferenting dental procedures (sensitivity = 100%, specificity = 86.7%, area under ROC curve = 0.99). FMRI results of dentoalveolar dynamic pressure pain in painfree subjects revealed activation of brain areas typically associated with acute pain processing including thalamus, primary/secondary somatosensory, insular and prefrontal cortex. A novel psychophysical method to deliver dynamic dentoalveolar pressure stimulation was developed and validated, allowing non-invasive MRI-based exploration of central nervous system function in response to intraoral somatosensation. The organization of the trigeminal system is unique as it provides somatosensory innervation to the face, masticatory and oral structures, the majority of the intracranial contents 1 and to specialized structures (tongue, nasal mucosa, auricle, tympanic membrane, cornea and part of the conjunctiva) 2. Somatic sensory information transmitted by the trigeminal nerve is crucial for normal orofacial function; however, the mechanisms of many chronic pain conditions affecting areas innervated by this sensory system are not well understood 345. The clinical presentation of chronic intraoral pain in the area of a tooth or in a site formally occupied by a tooth with no clinical or radiological signs of pathology, referred to as atypical odontalgia (AO) 67, is one such chronic pain condition of particular interest to dentists that is difficult to diagnose and manage. Recent research suggests both peripheral and central nervous system mechanisms being involved in AO pathophysiology 8910, but the majority of mechanism-based research of patients with AO has focused on the "peripheral aspect" 7.Functional magnetic resonance imaging (fMRI) is an established research technique to study the central aspects of pain 11. Of existing neuroimaging techniques, fMRI provides good spatial resolution of cortical and subcortical structures critical in the processing of nociception, acceptable temporal resolution, does not involve ionizing radiation, and can be performed using most MRI systems that already exist in research centers and the community. For these reasons, we sought to develop a protocol that allows us to use this tool to investigate the central mechanisms involved in the processes of intraoral pain arising from the dentoalveolar region. Using this device, our long-term objective is to improve our understanding of the underlying mechanisms of persistent dentoalveolar pain.In the past few years several studies used fMRI to investigate the human trigeminal system 1213, with a limited subset focusing on intraoral stimulation - specifically on the dentoalveolar processes, such as lip, tongue and teeth stimulation 14 or only teeth 151617. Some reasons for scarce literature on this topic may be the technical challenges involved in delivering facial/intraoral stimulation inside a MR scanner 1718: possibility of magnetic interference, detriment of image quality, subject discomfort and reduced working space between the subject's head and the radiofrequency coil. As a consequence a MR-compatible device would need to not only overcome these challenges but also be capable of delivering a controlled and reproducible stimuli 19, as reliability/reproducibility is a necessary feature of sensory testing 20.Existing MR-compatible methods of dentoalveolar stimulation are limited and do not adequately deliver stimuli across a range of non-painful to painful intensities and/or cannot be adjusted to reach posterior aspects of the dentoalveolar region. Therefore our goal was to develop and test the feasibility of a device able to: 1) provide reliable and valid dentoalveolar stimuli, 2) deliver such stimulation within the restricted space of an MR head coil, 3) be compatible for use within an MR environment, and 4) produce brain activation in painfree controls consistent to those observed by others using fMRI.

Optimization of structures on the basis of fracture mechanics and reliability criteria

NASA Technical Reports Server (NTRS)

Heer, E.; Yang, J. N.

1973-01-01

Systematic summary of factors which are involved in optimization of given structural configuration is part of report resulting from study of analysis of objective function. Predicted reliability of performance of finished structure is sharply dependent upon results of coupon tests. Optimization analysis developed by study also involves expected cost of proof testing.

Reliability, Validity, and Factor Structure of the Imaginative Capability Scale

ERIC Educational Resources Information Center

Liang, Chaoyun; Chia, Tsorng-Lin

2014-01-01

Three studies were combined to test the reliability, validity, and factor structure of the imaginative capability scale (ICS). The ICS was a new self-report measure, which was developed to be empirically valid and easy to administer. Study 1 consisted in an exploratory factor analysis to determine the most appropriate structure of the ICS in a…

Effect of Ethanol Blends and Batching Operations on SCC of Carbon Steel

DOT National Transportation Integrated Search

2011-02-08

This is the draft final report of the project on blending and batching (WP#325) of the Consolidated Program on Development of Guidelines for Safe and Reliable Pipeline Transportation of Ethanol Blends. The other two aspects of the consolidated progra...

Quantifying Error in Survey Measures of School and Classroom Environments

ERIC Educational Resources Information Center

Schweig, Jonathan David

2014-01-01

Developing indicators that reflect important aspects of school and classroom environments has become central in a nationwide effort to develop comprehensive programs that measure teacher quality and effectiveness. Formulating teacher evaluation policy necessitates accurate and reliable methods for measuring these environmental variables. This…

Female Criminal Violence and Differential MMPI Characteristics.

ERIC Educational Resources Information Center

Sutker, Patricia B.; And Others

1978-01-01

Compared MMPI scale elevations and profile patterns produced by female murderers. Results suggest significant, reliable relationships between extreme criminal violence and aspects of MMPI performance. Women murderers were more defensive, less in touch with impulses, more socially conforming, and more removed from stereotyped definitions of…

A Critique of the Research on Learning Styles.

ERIC Educational Resources Information Center

Curry, Lynn

1990-01-01

Learning styles advocates claim long-term improvements in four aspects of teaching and learning: curriculum design, instructional methods, assessment, and student guidance. The application of learning style theory encompasses three pervasive problems: confusion in definitions, weakness in measurement reliability and validity, and identification of…

Adapting the helpful responses questionnaire to assess communication skills involved in delivering contingency management: preliminary psychometrics.

PubMed

Hartzler, Bryan

2015-08-01

A paper/pencil instrument, adapted from Miller and colleagues' (1991) Helpful Responses Questionnaire (HRQ), was developed to assess clinician skill with core communicative aspects involved in delivering contingency management (CM). The instrument presents a single vignette consisting of six points of client dialogue to which respondents write 'what they would say next.' In the context of an implementation/effectiveness hybrid trial, 19 staff clinicians at an opiate treatment program completed serial training outcome assessments before, following, and three months after CM training. Assessments included this adaptation of the HRQ, a multiple-choice CM knowledge test, and a recorded standardized patient encounter scored for CM skillfulness. Study results reveal promising psychometric properties for the instrument, including strong scoring reliability, internal consistency, concurrent and predictive validity, test-retest reliability and sensitivity to training effects. These preliminary findings suggest the instrument is a viable, practical method to assess clinician skill in communicative aspects of CM delivery. Copyright © 2015 Elsevier Inc. All rights reserved.

Reliability of the OSCE for Physical and Occupational Therapists

PubMed Central

Sakurai, Hiroaki; Kanada, Yoshikiyo; Sugiura, Yoshito; Motoya, Ikuo; Wada, Yosuke; Yamada, Masayuki; Tomita, Masao; Tanabe, Shigeo; Teranishi, Toshio; Tsujimura, Toru; Sawa, Syunji; Okanishi, Tetsuo

2014-01-01

[Purpose] To examine agreement rates between faculty members and clinical supervisors as OSCE examiners. [Subjects] The study subjects were involved physical and occupational therapists working in clinical environments for 1 to 5 years after graduating from training schools as OSCE examinees, and a physical or occupational therapy faculty member and a clinical supervisor as examiners. Another clinical supervisor acted as a simulated patient. [Methods] The agreement rate between the examiners for each OSCE item was calculated based on Cohen’s kappa coefficient to confirm inter-rater reliability. [Results] The agreement rates for the behavioral aspects of the items were higher in the second than in the first examination. Similar increases were also observed in the agreement rates for the technical aspects until the initiation of each activity; however, the rates decreased during the middle to terminal stages of continuous movements. [Conclusion] The results may reflect the recent implementation of measures for the integration of therapist education in training schools and clinical training facilities. PMID:25202170

Classification in childhood disability: focusing on function in the 21st century.

PubMed

Rosenbaum, Peter; Eliasson, Ann-Christin; Hidecker, Mary Jo Cooley; Palisano, Robert J

2014-08-01

Classification systems in health care are usually based on current understanding of the condition. They are often derived empirically and adopted applying sound principles of measurement science to assess whether they are reliable (consistent) and valid (true) for the purposes to which they are applied. In the past 15 years, the authors have developed and validated classification systems for specific aspects of everyday function in people with cerebral palsy--gross motor function, manual abilities, and communicative function. This article describes the approaches used to conceptualize each aspect of function, develop the tools, and assess their reliability and validity. We report on the utility of each system with respect to clinical applicability, use of these tools for research, and the uptake and impact that they have had around the world. We hope that readers will find these accounts interesting, relevant, and applicable to their daily work with children and youth with disabilities. © The Author(s) 2014.

Methodology for research I.

PubMed

Garg, Rakesh

2016-09-01

The conduct of research requires a systematic approach involving diligent planning and its execution as planned. It comprises various essential predefined components such as aims, population, conduct/technique, outcome and statistical considerations. These need to be objective, reliable and in a repeatable format. Hence, the understanding of the basic aspects of methodology is essential for any researcher. This is a narrative review and focuses on various aspects of the methodology for conduct of a clinical research. The relevant keywords were used for literature search from various databases and from bibliographies of the articles.

[Comparison and Discussion of National/Military Standards Related to Flow Measurement of Medical Injection Pump].

PubMed

Zhang, Nan; Zhou, Juan; Yu, Jinlai; Hua, Ziyu; Li, Yongxue; Wu, Jiangang

2018-05-30

Medical injection pump is a commonly used clinical equipment with high risk. Accurate detection of flow is an important aspect to ensure its reliable operation. In this paper, we carefully studied and analyzed the flow detection methods of three standards being used in medical injection pump detection in our country. The three standards were compared from the aspects of standard device, flow test point selection, length of test time and accuracy judgment. The advantages and disadvantages of these standards were analyzed and suggestions for improvement were put forward.

Scoping study on trends in the economic value of electricity reliability to the U.S. economy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eto, Joseph; Koomey, Jonathan; Lehman, Bryan

During the past three years, working with more than 150 organizations representing public and private stakeholders, EPRI has developed the Electricity Technology Roadmap. The Roadmap identifies several major strategic challenges that must be successfully addressed to ensure a sustainable future in which electricity continues to play an important role in economic growth. Articulation of these anticipated trends and challenges requires a detailed understanding of the role and importance of reliable electricity in different sectors of the economy. This report is intended to contribute to that understanding by analyzing key aspects of trends in the economic value of electricity reliability inmore » the U.S. economy. We first present a review of recent literature on electricity reliability costs. Next, we describe three distinct end-use approaches for tracking trends in reliability needs: (1) an analysis of the electricity-use requirements of office equipment in different commercial sectors; (2) an examination of the use of aggregate statistical indicators of industrial electricity use and economic activity to identify high reliability-requirement customer market segments; and (3) a case study of cleanrooms, which is a cross-cutting market segment known to have high reliability requirements. Finally, we present insurance industry perspectives on electricity reliability as an example of a financial tool for addressing customers' reliability needs.« less

Introduction of the gross motor function classification system in Venezuela--a model for knowledge dissemination.

PubMed

Löwing, Kristina; Arredondo, Ynes C; Tedroff, Marika; Tedroff, Kristina

2015-09-04

A current worldwide common goal is to optimize the health and well-being of children with cerebral palsy (CP). In order to reach that goal, for this heterogeneous group, a common language and classification systems are required to predict development and offer evidence based interventions. In most countries in Africa, South America, Asia and Eastern Europe the classification systems for CP are unfamiliar and rarely used. Education and implementation are required. The specific aims of this study were to examine a model in order to introduce the Gross Motor Function Classification System (GMFCS-E&R) in Venezuela, and to examine the validity and the reliability. Children with CP, registered at a National child rehabilitation centre in Venezuela, were invited to participate. The Spanish version of GMFCS-E&R was used. The Wilson mobility scale was translated and used to examine the concurrent validity. A structured questionnaire, comprising aspects of mobility and gross motor function, was constructed. In addition, each child was filmed. A paediatrician in Venezuela received supervised self-education in GMFCS-E&R and the Wilson mobility scale. A Swedish student was educated in GMFCS-E&R and the Wilson mobility scale prior to visiting Venezuela. In Venezuela, all children were classified and scored by the paediatrician and student independently. An experienced paediatric physiotherapist (PT) in Sweden made independent GMFCS-E&R classifications and Wilson mobility scale scorings, accomplished through merging data from the structured questionnaire with observations of the films. Descriptive statistics were used and reliability was presented with weighted Kappa (Kw). Spearman's correlation coefficient was calculated to explore the concurrent validity between GMFCS-E&R and Wilson mobility scale. Eighty-eight children (56 boys), mean age 10 years (3-18), with CP participated. The inter-rater reliability of GMFCS-E&R between; the paediatrician and the PT was Kw = 0.85 (95% CI: 0.75-0.88), the PT and student was Kw = 0.91 (95% CI: 0.86-0.95) and the paediatrician and student was Kw = 0.85 (95 % CI: 0.79-0.90). The correlations between GMFCS-E&R and Wilson mobility scale were high rs =0.94-0.95 (p < 0.001). In a setting with no previous knowledge of GMFCS-E&R, the model with education, supervised self-education and practice was efficient and resulted in very good reliability and validity.

Reliability-based structural optimization: A proposed analytical-experimental study

NASA Technical Reports Server (NTRS)

Stroud, W. Jefferson; Nikolaidis, Efstratios

1993-01-01

An analytical and experimental study for assessing the potential of reliability-based structural optimization is proposed and described. In the study, competing designs obtained by deterministic and reliability-based optimization are compared. The experimental portion of the study is practical because the structure selected is a modular, actively and passively controlled truss that consists of many identical members, and because the competing designs are compared in terms of their dynamic performance and are not destroyed if failure occurs. The analytical portion of this study is illustrated on a 10-bar truss example. In the illustrative example, it is shown that reliability-based optimization can yield a design that is superior to an alternative design obtained by deterministic optimization. These analytical results provide motivation for the proposed study, which is underway.

Test-retest reliability of quantitative sensory testing for mechanical somatosensory and pain modulation assessment of masticatory structures.

PubMed

Costa, Y M; Morita-Neto, O; de Araújo-Júnior, E N S; Sampaio, F A; Conti, P C R; Bonjardim, L R

2017-03-01

Assessing the reliability of medical measurements is a crucial step towards the elaboration of an applicable clinical instrument. There are few studies that evaluate the reliability of somatosensory assessment and pain modulation of masticatory structures. This study estimated the test-retest reliability, that is over time, of the mechanical somatosensory assessment of anterior temporalis, masseter and temporomandibular joint (TMJ) and the conditioned pain modulation (CPM) using the anterior temporalis as the test site. Twenty healthy women were evaluated in two sessions (1 week apart) by the same examiner. Mechanical detection threshold (MDT), mechanical pain threshold (MPT), wind-up ratio (WUR) and pressure pain threshold (PPT) were assessed on the skin overlying the anterior temporalis, masseter and TMJ of the dominant side. CPM was tested by comparing PPT before and during the hand immersion in a hot water bath. anova and intra-class correlation coefficients (ICCs) were applied to the data (α = 5%). The overall ICCs showed acceptable values for the test-retest reliability of mechanical somatosensory assessment of masticatory structures. The ICC values of 75% of all quantitative sensory measurements were considered fair to excellent (fair = 8·4%, good = 33·3% and excellent = 33·3%). However, the CPM paradigm presented poor reliability (ICC = 0·25). The mechanical somatosensory assessment of the masticatory structures, but not the proposed CPM protocol, can be considered sufficiently reliable over time to evaluate the trigeminal sensory function. © 2016 John Wiley & Sons Ltd.

X-ray crystallography and its impact on understanding bacterial cell wall remodeling processes.

PubMed

Büttner, Felix Michael; Renner-Schneck, Michaela; Stehle, Thilo

2015-02-01

The molecular structure of matter defines its properties and function. This is especially true for biological macromolecules such as proteins, which participate in virtually all biochemical processes. A three dimensional structural model of a protein is thus essential for the detailed understanding of its physiological function and the characterization of essential properties such as ligand binding and reaction mechanism. X-ray crystallography is a well-established technique that has been used for many years, but it is still by far the most widely used method for structure determination. A particular strength of this technique is the elucidation of atomic details of molecular interactions, thus providing an invaluable tool for a multitude of scientific projects ranging from the structural classification of macromolecules over the validation of enzymatic mechanisms or the understanding of host-pathogen interactions to structure-guided drug design. In the first part of this review, we describe essential methodological and practical aspects of X-ray crystallography. We provide some pointers that should allow researchers without a background in structural biology to assess the overall quality and reliability of a crystal structure. To highlight its potential, we then survey the impact X-ray crystallography has had on advancing an understanding of a class of enzymes that modify the bacterial cell wall. A substantial number of different bacterial amidase structures have been solved, mostly by X-ray crystallography. Comparison of these structures highlights conserved as well as divergent features. In combination with functional analyses, structural information on these enzymes has therefore proven to be a valuable template not only for understanding their mechanism of catalysis, but also for targeted interference with substrate binding. Copyright © 2015 Elsevier GmbH. All rights reserved.

Theoretical Aspects of Laser-Induced Periodic Surface Structure Formation,

DTIC Science & Technology

1983-11-01

r AD-A134 875 UNCLASSIFIED THEORETICAL ASPECTS OF LASER -INUUCtl) PtKlUUlt bUKhALt STRUCTURE FORMATION(U) ROCHESTER UNIV NY DEPT OF CHEMISTRY M...UR0CHESTER/DC/83/TR-43 2. COVT ACCESSION NO A. TITLE (and Subllllm) Theoretical Aspects of Laser -Induced Periodic Surface Structure Formation 7...publication in Laser -Controlled Chemical Processing of Surfaces, ed. by A. W. Johnson and D. J. Ehrlich (Elsevier, New York) 19 KEY WORDS (Continue

Finite element analysis simulations for ultrasonic array NDE inspections

NASA Astrophysics Data System (ADS)

Dobson, Jeff; Tweedie, Andrew; Harvey, Gerald; O'Leary, Richard; Mulholland, Anthony; Tant, Katherine; Gachagan, Anthony

2016-02-01

Advances in manufacturing techniques and materials have led to an increase in the demand for reliable and robust inspection techniques to maintain safety critical features. The application of modelling methods to develop and evaluate inspections is becoming an essential tool for the NDE community. Current analytical methods are inadequate for simulation of arbitrary components and heterogeneous materials, such as anisotropic welds or composite structures. Finite element analysis software (FEA), such as PZFlex, can provide the ability to simulate the inspection of these arrangements, providing the ability to economically prototype and evaluate improved NDE methods. FEA is often seen as computationally expensive for ultrasound problems however, advances in computing power have made it a more viable tool. This paper aims to illustrate the capability of appropriate FEA to produce accurate simulations of ultrasonic array inspections - minimizing the requirement for expensive test-piece fabrication. Validation is afforded via corroboration of the FE derived and experimentally generated data sets for a test-block comprising 1D and 2D defects. The modelling approach is extended to consider the more troublesome aspects of heterogeneous materials where defect dimensions can be of the same length scale as the grain structure. The model is used to facilitate the implementation of new ultrasonic array inspection methods for such materials. This is exemplified by considering the simulation of ultrasonic NDE in a weld structure in order to assess new approaches to imaging such structures.

Wave-formed structures and paleoenvironmental reconstruction

USGS Publications Warehouse

Clifton, H.E.; Dingler, J.R.

1984-01-01

Wave-formed sedimentary structures can be powerful interpretive tools because they reflect not only the velocity and direction of the oscillatory currents, but also the length of the horizontal component of orbital motion and the presence of velocity asymmetry within the flow. Several of these aspects can be related through standard wave theories to combinations of wave dimensions and water depth that have definable natural limits. For a particular grain size, threshold of particle movement and that of conversion from a rippled to flat bed indicate flow-velocity limits. The ratio of ripple spacing to grain size provides an estimate of the length of the near-bottom orbital motion. The degree of velocity asymmetry is related to the asymmetry of the bedforms, though it presently cannot be estimated with confidence. A plot of water depth versus wave height (h-H diagram) provides a convenient approach for showing the combination of wave parameters and water depths capable of generating any particular structure in sand of a given grain size. Natural limits on wave height and inferences or assumptions regarding either water depth or wave period based on geologic evidence allow refinement of the paleoenvironmental reconstruction. The assumptions and the degree of approximation involved in the different techniques impose significant constraints. Inferences based on wave-formed structures are most reliable when they are drawn in the context of other evidence such as the association of sedimentary features or progradational sequences. ?? 1984.

Exploring Protein Dynamics Space: The Dynasome as the Missing Link between Protein Structure and Function

PubMed Central

Hensen, Ulf; Meyer, Tim; Haas, Jürgen; Rex, René; Vriend, Gert; Grubmüller, Helmut

2012-01-01

Proteins are usually described and classified according to amino acid sequence, structure or function. Here, we develop a minimally biased scheme to compare and classify proteins according to their internal mobility patterns. This approach is based on the notion that proteins not only fold into recurring structural motifs but might also be carrying out only a limited set of recurring mobility motifs. The complete set of these patterns, which we tentatively call the dynasome, spans a multi-dimensional space with axes, the dynasome descriptors, characterizing different aspects of protein dynamics. The unique dynamic fingerprint of each protein is represented as a vector in the dynasome space. The difference between any two vectors, consequently, gives a reliable measure of the difference between the corresponding protein dynamics. We characterize the properties of the dynasome by comparing the dynamics fingerprints obtained from molecular dynamics simulations of 112 proteins but our approach is, in principle, not restricted to any specific source of data of protein dynamics. We conclude that: 1. the dynasome consists of a continuum of proteins, rather than well separated classes. 2. For the majority of proteins we observe strong correlations between structure and dynamics. 3. Proteins with similar function carry out similar dynamics, which suggests a new method to improve protein function annotation based on protein dynamics. PMID:22606222

Simplex volume analysis for finding endmembers in hyperspectral imagery

NASA Astrophysics Data System (ADS)

Li, Hsiao-Chi; Song, Meiping; Chang, Chein-I.

2015-05-01

Using maximal simplex volume as an optimal criterion for finding endmembers is a common approach and has been widely studied in the literature. Interestingly, very little work has been reported on how simplex volume is calculated. It turns out that the issue of calculating simplex volume is much more complicated and involved than what we may think. This paper investigates this issue from two different aspects, geometric structure and eigen-analysis. The geometric structure is derived from its simplex structure whose volume can be calculated by multiplying its base with its height. On the other hand, eigen-analysis takes advantage of the Cayley-Menger determinant to calculate the simplex volume. The major issue of this approach is that when the matrix is ill-rank where determinant is desired. To deal with this problem two methods are generally considered. One is to perform data dimensionality reduction to make the matrix to be of full rank. The drawback of this method is that the original volume has been shrunk and the found volume of a dimensionality-reduced simplex is not the real original simplex volume. Another is to use singular value decomposition (SVD) to find singular values for calculating simplex volume. The dilemma of this method is its instability in numerical calculations. This paper explores all of these three methods in simplex volume calculation. Experimental results show that geometric structure-based method yields the most reliable simplex volume.

A probabilisitic based failure model for components fabricated from anisotropic graphite

NASA Astrophysics Data System (ADS)

Xiao, Chengfeng

The nuclear moderator for high temperature nuclear reactors are fabricated from graphite. During reactor operations graphite components are subjected to complex stress states arising from structural loads, thermal gradients, neutron irradiation damage, and seismic events. Graphite is a quasi-brittle material. Two aspects of nuclear grade graphite, i.e., material anisotropy and different behavior in tension and compression, are explicitly accounted for in this effort. Fracture mechanic methods are useful for metal alloys, but they are problematic for anisotropic materials with a microstructure that makes it difficult to identify a "critical" flaw. In fact cracking in a graphite core component does not necessarily result in the loss of integrity of a nuclear graphite core assembly. A phenomenological failure criterion that does not rely on flaw detection has been derived that accounts for the material behaviors mentioned. The probability of failure of components fabricated from graphite is governed by the scatter in strength. The design protocols being proposed by international code agencies recognize that design and analysis of reactor core components must be based upon probabilistic principles. The reliability models proposed herein for isotropic graphite and graphite that can be characterized as being transversely isotropic are another set of design tools for the next generation very high temperature reactors (VHTR) as well as molten salt reactors. The work begins with a review of phenomenologically based deterministic failure criteria. A number of this genre of failure models are compared with recent multiaxial nuclear grade failure data. Aspects in each are shown to be lacking. The basic behavior of different failure strengths in tension and compression is exhibited by failure models derived for concrete, but attempts to extend these concrete models to anisotropy were unsuccessful. The phenomenological models are directly dependent on stress invariants. A set of invariants, known as an integrity basis, was developed for a non-linear elastic constitutive model. This integrity basis allowed the non-linear constitutive model to exhibit different behavior in tension and compression and moreover, the integrity basis was amenable to being augmented and extended to anisotropic behavior. This integrity basis served as the starting point in developing both an isotropic reliability model and a reliability model for transversely isotropic materials. At the heart of the reliability models is a failure function very similar in nature to the yield functions found in classic plasticity theory. The failure function is derived and presented in the context of a multiaxial stress space. States of stress inside the failure envelope denote safe operating states. States of stress on or outside the failure envelope denote failure. The phenomenological strength parameters associated with the failure function are treated as random variables. There is a wealth of failure data in the literature that supports this notion. The mathematical integration of a joint probability density function that is dependent on the random strength variables over the safe operating domain defined by the failure function provides a way to compute the reliability of a state of stress in a graphite core component fabricated from graphite. The evaluation of the integral providing the reliability associated with an operational stress state can only be carried out using a numerical method. Monte Carlo simulation with importance sampling was selected to make these calculations. The derivation of the isotropic reliability model and the extension of the reliability model to anisotropy are provided in full detail. Model parameters are cast in terms of strength parameters that can (and have been) characterized by multiaxial failure tests. Comparisons of model predictions with failure data is made and a brief comparison is made to reliability predictions called for in the ASME Boiler and Pressure Vessel Code. Future work is identified that would provide further verification and augmentation of the numerical methods used to evaluate model predictions.

Acicular photomultiplier photocathode structure

DOEpatents

Craig, Richard A.; Bliss, Mary

2003-09-30

A method and apparatus for increasing the quantum efficiency of a photomultiplier tube by providing a photocathode with an increased surface-to-volume ratio. The photocathode includes a transparent substrate, upon one major side of which is formed one or more large aspect-ratio structures, such as needles, cones, fibers, prisms, or pyramids. The large aspect-ratio structures are at least partially composed of a photoelectron emitting material, i.e., a material that emits a photoelectron upon absorption of an optical photon. The large aspect-ratio structures may be substantially composed of the photoelectron emitting material (i.e., formed as such upon the surface of a relatively flat substrate) or be only partially composed of a photoelectron emitting material (i.e., the photoelectron emitting material is coated over large aspect-ratio structures formed from the substrate material itself.) The large aspect-ratio nature of the photocathode surface allows for an effective increase in the thickness of the photocathode relative the absorption of optical photons, thereby increasing the absorption rate of incident photons, without substantially increasing the effective thickness of the photocathode relative the escape incidence of the photoelectrons.

The Nature of Science Instrument-Elementary (NOSI-E): the end of the road?

PubMed

Peoples, Shelagh M; O'Dwyer, Laura M

2014-01-01

This research continues prior work published in this journal (Peoples, O'Dwyer, Shields and Wang, 2013). The first paper described the scale development, psychometric analyses and part-validation of a theoretically-grounded Rasch-based instrument, the Nature of Science Instrument-Elementary (NOSI-E). The NOSI-E was designed to measure elementary students' understanding of the Nature of Science (NOS). In the first paper, evidence was provided for three of the six validity aspects (content, substantive and generalizability) needed to support the construct validity of the NOSI-E. The research described in this paper examines two additional validity aspects (structural and external). The purpose of this study was to determine which of three competing internal models provides reliable, interpretable, and responsive measures of students' understanding of NOS. One postulate is that the NOS construct is unidimensional;. alternatively, the NOS construct is composed of five independent unidimensional constructs (the consecutive approach). Lastly, the NOS construct is multidimensional and composed of five inter-related but separate dimensions. The vast body of evidence supported the claim that the NOS construct is multidimensional. Measures from the multidimensional model were positively related to student science achievement and students' perceptions of their classroom environment; this provided supporting evidence for the external validity aspect of the NOS construct. As US science education moves toward students learning science through engaging in authentic scientific practices and building learning progressions (NRC, 2012), it will be important to assess whether this new approach to teaching science is effective, and the NOSI-E may be used as a measure of the impact of this reform.

Reconstructing Late Holocene North Atlantic atmospheric circulation changes using functional paleoclimate networks

NASA Astrophysics Data System (ADS)

Franke, Jasper G.; Werner, Johannes P.; Donner, Reik V.

2017-11-01

Obtaining reliable reconstructions of long-term atmospheric circulation changes in the North Atlantic region presents a persistent challenge to contemporary paleoclimate research, which has been addressed by a multitude of recent studies. In order to contribute a novel methodological aspect to this active field, we apply here evolving functional network analysis, a recently developed tool for studying temporal changes of the spatial co-variability structure of the Earth's climate system, to a set of Late Holocene paleoclimate proxy records covering the last two millennia. The emerging patterns obtained by our analysis are related to long-term changes in the dominant mode of atmospheric circulation in the region, the North Atlantic Oscillation (NAO). By comparing the time-dependent inter-regional linkage structures of the obtained functional paleoclimate network representations to a recent multi-centennial NAO reconstruction, we identify co-variability between southern Greenland, Svalbard, and Fennoscandia as being indicative of a positive NAO phase, while connections from Greenland and Fennoscandia to central Europe are more pronounced during negative NAO phases. By drawing upon this correspondence, we use some key parameters of the evolving network structure to obtain a qualitative reconstruction of the NAO long-term variability over the entire Common Era (last 2000 years) using a linear regression model trained upon the existing shorter reconstruction.

The Structure of Social Exchange in Self-Help Support Groups: Development of a Measure

PubMed Central

Brown, Louis D.; Tang, Xiaohui; Hollman, Ruth L.

2014-01-01

Self-help support groups are indigenous community resources designed to help people manage a variety of personal challenges, from alcohol abuse to xeroderma pigmentosum. The social exchanges that occur during group meetings are central to understanding how people benefit from participation. This paper examines the different types of social exchange behaviors that occur during meetings, using two studies to develop empirically distinct scales that reliably measure theoretically important types of exchange. Resource theory informed the initial measurement development efforts. Exploratory factor analyses from the first study led to revisions in the factor structure of the social exchange scales. The revised measure captured the exchange of emotional support, experiential information, humor, unwanted behaviors, and exchanges outside meetings. Confirmatory factor analyses from a follow-up study with a different sample of self-help support groups provided good model fit, suggesting the revised structure accurately represented the data. Further, the scales demonstrated good convergent and discriminant validity with related constructs. Future research can use the scales to identify aspects of social exchange that are most important in improving health outcomes among self-help support group participants. Groups can use the scales in practice to celebrate strengths and address weaknesses in their social exchange dynamics. PMID:24398622

Psychometric properties of the Danish student well-being questionnaire assessed in >250,000 student responders.

PubMed

Niclasen, Janni; Keilow, Maria; Obel, Carsten

2018-05-01

Well-being is considered a prerequisite for learning. The Danish Ministry of Education initiated the development of a new 40-item student well-being questionnaire in 2014 to monitor well-being among all Danish public school students on a yearly basis. The aim of this study was to investigate the basic psychometric properties of this questionnaire. We used the data from the 2015 Danish student well-being survey for 268,357 students in grades 4-9 (about 85% of the study population). Descriptive statistics, exploratory factor analyses, confirmatory factor analyses and Cronbach's α reliability measures were used in the analyses. The factor analyses did not unambiguously support one particular factor structure. However, based on the basic descriptive statistics, exploratory factor analyses, confirmatory factor analyses, the semantics of the individual items and Cronbach's α, we propose a four-factor structure including 27 of the 40 items originally proposed. The four scales measure school connectedness, learning self-efficacy, learning environment and classroom management. Two bullying items and two psychosomatic items should be considered separately, leaving 31 items in the questionnaire. The proposed four-factor structure addresses central aspects of well-being, which, if used constructively, may support public schools' work to increase levels of student well-being.

TOPICAL REVIEW: Self-assembly from milli- to nanoscales: methods and applications

NASA Astrophysics Data System (ADS)

Mastrangeli, M.; Abbasi, S.; Varel, C.; Van Hoof, C.; Celis, J.-P.; Böhringer, K. F.

2009-08-01

The design and fabrication techniques for microelectromechanical systems (MEMS) and nanodevices are progressing rapidly. However, due to material and process flow incompatibilities in the fabrication of sensors, actuators and electronic circuitry, a final packaging step is often necessary to integrate all components of a heterogeneous microsystem on a common substrate. Robotic pick-and-place, although accurate and reliable at larger scales, is a serial process that downscales unfavorably due to stiction problems, fragility and sheer number of components. Self-assembly, on the other hand, is parallel and can be used for device sizes ranging from millimeters to nanometers. In this review, the state-of-the-art in methods and applications for self-assembly is reviewed. Methods for assembling three-dimensional (3D) MEMS structures out of two-dimensional (2D) ones are described. The use of capillary forces for folding 2D plates into 3D structures, as well as assembling parts onto a common substrate or aggregating parts to each other into 2D or 3D structures, is discussed. Shape matching and guided assembly by magnetic forces and electric fields are also reviewed. Finally, colloidal self-assembly and DNA-based self-assembly, mainly used at the nanoscale, are surveyed, and aspects of theoretical modeling of stochastic assembly processes are discussed.

Self-assembly from milli- to nanoscales: methods and applications

PubMed Central

Mastrangeli, M; Abbasi, S; Varel, C; Van Hoof, C; Celis, J-P; Böhringer, K F

2009-01-01

The design and fabrication techniques for microelectromechanical systems (MEMS) and nanodevices are progressing rapidly. However, due to material and process flow incompatibilities in the fabrication of sensors, actuators and electronic circuitry, a final packaging step is often necessary to integrate all components of a heterogeneous microsystem on a common substrate. Robotic pick-and-place, although accurate and reliable at larger scales, is a serial process that downscales unfavorably due to stiction problems, fragility and sheer number of components. Self-assembly, on the other hand, is parallel and can be used for device sizes ranging from millimeters to nanometers. In this review, the state-of-the-art in methods and applications for self-assembly is reviewed. Methods for assembling three-dimensional (3D) MEMS structures out of two-dimensional (2D) ones are described. The use of capillary forces for folding 2D plates into 3D structures, as well as assembling parts onto a common substrate or aggregating parts to each other into 2D or 3D structures, is discussed. Shape matching and guided assembly by magnetic forces and electric fields are also reviewed. Finally, colloidal self-assembly and DNA-based self-assembly, mainly used at the nanoscale, are surveyed, and aspects of theoretical modeling of stochastic assembly processes are discussed. PMID:20209016

Structural Reliability and Monte Carlo Simulation.

ERIC Educational Resources Information Center

Laumakis, P. J.; Harlow, G.

2002-01-01

Analyzes a simple boom structure and assesses its reliability using elementary engineering mechanics. Demonstrates the power and utility of Monte-Carlo simulation by showing that such a simulation can be implemented more readily with results that compare favorably to the theoretical calculations. (Author/MM)

Optimization of Adaptive Intraply Hybrid Fiber Composites with Reliability Considerations

NASA Technical Reports Server (NTRS)

Shiao, Michael C.; Chamis, Christos C.

1994-01-01

The reliability with bounded distribution parameters (mean, standard deviation) was maximized and the reliability-based cost was minimized for adaptive intra-ply hybrid fiber composites by using a probabilistic method. The probabilistic method accounts for all naturally occurring uncertainties including those in constituent material properties, fabrication variables, structure geometry, and control-related parameters. Probabilistic sensitivity factors were computed and used in the optimization procedures. For actuated change in the angle of attack of an airfoil-like composite shell structure with an adaptive torque plate, the reliability was maximized to 0.9999 probability, with constraints on the mean and standard deviation of the actuation material volume ratio (percentage of actuation composite material in a ply) and the actuation strain coefficient. The reliability-based cost was minimized for an airfoil-like composite shell structure with an adaptive skin and a mean actuation material volume ratio as the design parameter. At a O.9-mean actuation material volume ratio, the minimum cost was obtained.

Durability reliability analysis for corroding concrete structures under uncertainty

NASA Astrophysics Data System (ADS)

Zhang, Hao

2018-02-01

This paper presents a durability reliability analysis of reinforced concrete structures subject to the action of marine chloride. The focus is to provide insight into the role of epistemic uncertainties on durability reliability. The corrosion model involves a number of variables whose probabilistic characteristics cannot be fully determined due to the limited availability of supporting data. All sources of uncertainty, both aleatory and epistemic, should be included in the reliability analysis. Two methods are available to formulate the epistemic uncertainty: the imprecise probability-based method and the purely probabilistic method in which the epistemic uncertainties are modeled as random variables. The paper illustrates how the epistemic uncertainties are modeled and propagated in the two methods, and shows how epistemic uncertainties govern the durability reliability.

Integrated material state awareness system with self-learning symbiotic diagnostic algorithms and models

NASA Astrophysics Data System (ADS)

Banerjee, Sourav; Liu, Lie; Liu, S. T.; Yuan, Fuh-Gwo; Beard, Shawn

2011-04-01

Materials State Awareness (MSA) goes beyond traditional NDE and SHM in its challenge to characterize the current state of material damage before the onset of macro-damage such as cracks. A highly reliable, minimally invasive system for MSA of Aerospace Structures, Naval structures as well as next generation space systems is critically needed. Development of such a system will require a reliable SHM system that can detect the onset of damage well before the flaw grows to a critical size. Therefore, it is important to develop an integrated SHM system that not only detects macroscale damages in the structures but also provides an early indication of flaw precursors and microdamages. The early warning for flaw precursors and their evolution provided by an SHM system can then be used to define remedial strategies before the structural damage leads to failure, and significantly improve the safety and reliability of the structures. Thus, in this article a preliminary concept of developing the Hybrid Distributed Sensor Network Integrated with Self-learning Symbiotic Diagnostic Algorithms and Models to accurately and reliably detect the precursors to damages that occur to the structure are discussed. Experiments conducted in a laboratory environment shows potential of the proposed technique.

Distributed collaborative probabilistic design of multi-failure structure with fluid-structure interaction using fuzzy neural network of regression

NASA Astrophysics Data System (ADS)

Song, Lu-Kai; Wen, Jie; Fei, Cheng-Wei; Bai, Guang-Chen

2018-05-01

To improve the computing efficiency and precision of probabilistic design for multi-failure structure, a distributed collaborative probabilistic design method-based fuzzy neural network of regression (FR) (called as DCFRM) is proposed with the integration of distributed collaborative response surface method and fuzzy neural network regression model. The mathematical model of DCFRM is established and the probabilistic design idea with DCFRM is introduced. The probabilistic analysis of turbine blisk involving multi-failure modes (deformation failure, stress failure and strain failure) was investigated by considering fluid-structure interaction with the proposed method. The distribution characteristics, reliability degree, and sensitivity degree of each failure mode and overall failure mode on turbine blisk are obtained, which provides a useful reference for improving the performance and reliability of aeroengine. Through the comparison of methods shows that the DCFRM reshapes the probability of probabilistic analysis for multi-failure structure and improves the computing efficiency while keeping acceptable computational precision. Moreover, the proposed method offers a useful insight for reliability-based design optimization of multi-failure structure and thereby also enriches the theory and method of mechanical reliability design.

Probabilistic Structural Analysis Methods (PSAM) for select space propulsion system components, part 2

NASA Technical Reports Server (NTRS)

1991-01-01

The technical effort and computer code enhancements performed during the sixth year of the Probabilistic Structural Analysis Methods program are summarized. Various capabilities are described to probabilistically combine structural response and structural resistance to compute component reliability. A library of structural resistance models is implemented in the Numerical Evaluations of Stochastic Structures Under Stress (NESSUS) code that included fatigue, fracture, creep, multi-factor interaction, and other important effects. In addition, a user interface was developed for user-defined resistance models. An accurate and efficient reliability method was developed and was successfully implemented in the NESSUS code to compute component reliability based on user-selected response and resistance models. A risk module was developed to compute component risk with respect to cost, performance, or user-defined criteria. The new component risk assessment capabilities were validated and demonstrated using several examples. Various supporting methodologies were also developed in support of component risk assessment.

Correlations between Energy and Displacement Demands for Performance-Based Seismic Engineering

NASA Astrophysics Data System (ADS)

Mollaioli, Fabrizio; Bruno, Silvia; Decanini, Luis; Saragoni, Rodolfo

2011-01-01

The development of a scientific framework for performance-based seismic engineering requires, among other steps, the evaluation of ground motion intensity measures at a site and the characterization of their relationship with suitable engineering demand parameters (EDPs) which describe the performance of a structure. In order to be able to predict the damage resulting from earthquake ground motions in a structural system, it is first necessary to properly identify ground motion parameters that are well correlated with structural response and, in turn, with damage. Since structural damage during an earthquake ground motion may be due to excessive deformation or to cumulative cyclic damage, reliable methods for estimating displacement demands on structures are needed. Even though the seismic performance is directly related to the global and local deformations of the structure, energy-based methodologies appear more helpful in concept, as they permit a rational assessment of the energy absorption and dissipation mechanisms that can be effectively accomplished to balance the energy imparted to the structure. Moreover, energy-based parameters are directly related to cycles of response of the structure and, therefore, they can implicitly capture the effect of ground motion duration, which is ignored by conventional spectral parameters. Therefore, the identification of reliable relationships between energy and displacement demands represents a fundamental issue in both the development of more reliable seismic code provisions and the evaluation of seismic vulnerability aimed at the upgrading of existing hazardous facilities. As these two aspects could become consistently integrated within a performance-based seismic design methodology, understanding how input and dissipated energy are correlated with displacement demands emerges as a decisive prerequisite. The aim of the present study is the establishment of functional relationships between input and dissipated energy (that can be considered as parameters representative of the amplitude, frequency content and duration of earthquake ground motions) and displacement-based response measures that are well correlated to structural and non-structural damage. For the purpose of quantifying the EDPs to be related to the energy measures, for comprehensive range of ground motion and structural characteristics, both simplified and more accurate numerical models will be used in this study for the estimation of local and global displacement and energy demands. Parametric linear and nonlinear time-history analyses will be performed on elastic and inelastic SDOF and MDOF systems, in order to assume information on the seismic response of a wide range of current structures. Hysteretic models typical of frame force/displacement behavior will be assumed for the local inelastic cyclic response of the systems. A wide range of vibration periods will be taken into account so as to define displacement, interstory drift and energy spectra for MDOF systems. Various scalar measures related to the deformation demand will be used in this research. These include the spectral displacements, the peak roof drift ratio, and the peak interstory drift ratio. A total of about 900 recorded ground motions covering a broad variety of condition in terms of frequency content, duration and amplitude will be used as input in the dynamic analyses. The records are obtained from 40 earthquakes and grouped as a function of magnitude of the event, source-to-site condition and site soil condition. In addition, in the data-set of records a considerable number of near-fault signals is included, in recognition of the particular significance of pulse-like time histories in causing large seismic demands to the structures.

Towards aspect-oriented functional--structural plant modelling.

PubMed

Cieslak, Mikolaj; Seleznyova, Alla N; Prusinkiewicz, Przemyslaw; Hanan, Jim

2011-10-01

Functional-structural plant models (FSPMs) are used to integrate knowledge and test hypotheses of plant behaviour, and to aid in the development of decision support systems. A significant amount of effort is being put into providing a sound methodology for building them. Standard techniques, such as procedural or object-oriented programming, are not suited for clearly separating aspects of plant function that criss-cross between different components of plant structure, which makes it difficult to reuse and share their implementations. The aim of this paper is to present an aspect-oriented programming approach that helps to overcome this difficulty. The L-system-based plant modelling language L+C was used to develop an aspect-oriented approach to plant modelling based on multi-modules. Each element of the plant structure was represented by a sequence of L-system modules (rather than a single module), with each module representing an aspect of the element's function. Separate sets of productions were used for modelling each aspect, with context-sensitive rules facilitated by local lists of modules to consider/ignore. Aspect weaving or communication between aspects was made possible through the use of pseudo-L-systems, where the strict-predecessor of a production rule was specified as a multi-module. The new approach was used to integrate previously modelled aspects of carbon dynamics, apical dominance and biomechanics with a model of a developing kiwifruit shoot. These aspects were specified independently and their implementation was based on source code provided by the original authors without major changes. This new aspect-oriented approach to plant modelling is well suited for studying complex phenomena in plant science, because it can be used to integrate separate models of individual aspects of plant development and function, both previously constructed and new, into clearly organized, comprehensive FSPMs. In a future work, this approach could be further extended into an aspect-oriented programming language for FSPMs.

Towards aspect-oriented functional–structural plant modelling

PubMed Central

Cieslak, Mikolaj; Seleznyova, Alla N.; Prusinkiewicz, Przemyslaw; Hanan, Jim

2011-01-01

Background and Aims Functional–structural plant models (FSPMs) are used to integrate knowledge and test hypotheses of plant behaviour, and to aid in the development of decision support systems. A significant amount of effort is being put into providing a sound methodology for building them. Standard techniques, such as procedural or object-oriented programming, are not suited for clearly separating aspects of plant function that criss-cross between different components of plant structure, which makes it difficult to reuse and share their implementations. The aim of this paper is to present an aspect-oriented programming approach that helps to overcome this difficulty. Methods The L-system-based plant modelling language L+C was used to develop an aspect-oriented approach to plant modelling based on multi-modules. Each element of the plant structure was represented by a sequence of L-system modules (rather than a single module), with each module representing an aspect of the element's function. Separate sets of productions were used for modelling each aspect, with context-sensitive rules facilitated by local lists of modules to consider/ignore. Aspect weaving or communication between aspects was made possible through the use of pseudo-L-systems, where the strict-predecessor of a production rule was specified as a multi-module. Key Results The new approach was used to integrate previously modelled aspects of carbon dynamics, apical dominance and biomechanics with a model of a developing kiwifruit shoot. These aspects were specified independently and their implementation was based on source code provided by the original authors without major changes. Conclusions This new aspect-oriented approach to plant modelling is well suited for studying complex phenomena in plant science, because it can be used to integrate separate models of individual aspects of plant development and function, both previously constructed and new, into clearly organized, comprehensive FSPMs. In a future work, this approach could be further extended into an aspect-oriented programming language for FSPMs. PMID:21724653

Teaching learning methods of an entrepreneurship curriculum.

PubMed

Esmi, Keramat; Marzoughi, Rahmatallah; Torkzadeh, Jafar

2015-10-01

One of the most significant elements of entrepreneurship curriculum design is teaching-learning methods, which plays a key role in studies and researches related to such a curriculum. It is the teaching method, and systematic, organized and logical ways of providing lessons that should be consistent with entrepreneurship goals and contents, and should also be developed according to the learners' needs. Therefore, the current study aimed to introduce appropriate, modern, and effective methods of teaching entrepreneurship and their validation. This is a mixed method research of a sequential exploratory kind conducted through two stages: a) developing teaching methods of entrepreneurship curriculum, and b) validating developed framework. Data were collected through "triangulation" (study of documents, investigating theoretical basics and the literature, and semi-structured interviews with key experts). Since the literature on this topic is very rich, and views of the key experts are vast, directed and summative content analysis was used. In the second stage, qualitative credibility of research findings was obtained using qualitative validation criteria (credibility, confirmability, and transferability), and applying various techniques. Moreover, in order to make sure that the qualitative part is reliable, reliability test was used. Moreover, quantitative validation of the developed framework was conducted utilizing exploratory and confirmatory factor analysis methods and Cronbach's alpha. The data were gathered through distributing a three-aspect questionnaire (direct presentation teaching methods, interactive, and practical-operational aspects) with 29 items among 90 curriculum scholars. Target population was selected by means of purposive sampling and representative sample. Results obtained from exploratory factor analysis showed that a three factor structure is an appropriate method for describing elements of teaching-learning methods of entrepreneurship curriculum. Moreover, the value for Kaiser Meyer Olkin measure of sampling adequacy equaled 0.72 and the value for Bartlett's test of variances homogeneity was significant at the 0.0001 level. Except for internship element, the rest had a factor load of higher than 0.3. Also, the results of confirmatory factor analysis showed the model appropriateness, and the criteria for qualitative accreditation were acceptable. Developed model can help instructors in selecting an appropriate method of entrepreneurship teaching, and it can also make sure that the teaching is on the right path. Moreover, the model is comprehensive and includes all the effective teaching methods in entrepreneurship education. It is also based on qualities, conditions, and requirements of Higher Education Institutions in Iranian cultural environment.

The influence of authentic leadership and empowerment on nurses' relational social capital, mental health and job satisfaction over the first year of practice.

PubMed

Read, Emily A; Laschinger, Heather K S

2015-07-01

To examine a theoretical model testing the effects of authentic leadership, structural empowerment and relational social capital on the mental health and job satisfaction of new graduate nurses over the first year of practice. Relational social capital is an important interpersonal organizational resource that may foster new graduate nurses' workplace well-being and promote retention. Evidence shows that authentic leadership and structural empowerment are key aspects of the work environment that support new graduate nurses; however, the mediating role of relational social capital has yet to be explored. A longitudinal survey design was used to test the hypothesized model. One hundred ninety-one new graduate nurses in Ontario with <2 years of experience completed mail surveys in January-March 2010 and 1 year later in 2011. Path analysis using structural equation modelling was used to test the theoretical model. Participants were mostly female, working full time in medicine/surgery or critical care. All measures demonstrated acceptable reliability and validity. Path analysis results supported our hypothesized model; structural empowerment mediated the relationship between authentic leadership and nurses' relational social capital, which in turn had a negative effect on mental health symptoms and a positive effect on job satisfaction. All indirect paths in the model were significant. By creating structurally empowering work environments, authentic leaders foster relational social capital among new graduate nurses leading to positive health and retention outcomes. © 2015 John Wiley & Sons Ltd.

Framework to model neutral particle flux in convex high aspect ratio structures using one-dimensional radiosity

NASA Astrophysics Data System (ADS)

Manstetten, Paul; Filipovic, Lado; Hössinger, Andreas; Weinbub, Josef; Selberherr, Siegfried

2017-02-01

We present a computationally efficient framework to compute the neutral flux in high aspect ratio structures during three-dimensional plasma etching simulations. The framework is based on a one-dimensional radiosity approach and is applicable to simulations of convex rotationally symmetric holes and convex symmetric trenches with a constant cross-section. The framework is intended to replace the full three-dimensional simulation step required to calculate the neutral flux during plasma etching simulations. Especially for high aspect ratio structures, the computational effort, required to perform the full three-dimensional simulation of the neutral flux at the desired spatial resolution, conflicts with practical simulation time constraints. Our results are in agreement with those obtained by three-dimensional Monte Carlo based ray tracing simulations for various aspect ratios and convex geometries. With this framework we present a comprehensive analysis of the influence of the geometrical properties of high aspect ratio structures as well as of the particle sticking probability on the neutral particle flux.

Development of an audit instrument for nursing care plans in the patient record

PubMed Central

Bjorvell, C; Thorell-Ekstrand, I; Wredling, R

2000-01-01

Objectives—To develop, validate, and test the reliability of an audit instrument that measures the extent to which patient records describe important aspects of nursing care. Material—Twenty records from each of three hospital wards were collected and audited. The auditors were registered nurses with a knowledge of nursing documentation in accordance with the VIPS model—a model designed to structure nursing documentation. (VIPS is an acronym formed from the Swedish words for wellbeing, integrity, prevention, and security.) Methods—An audit instrument was developed by determining specific criteria to be met. The audit questions were aimed at revealing the content of the patient for nursing assessment, nursing diagnosis, planned interventions, and outcome. Each of the 60 records was reviewed by the three auditors independently and the reliability of the instrument was tested by calculating the inter-rater reliability coefficient. Content validity was tested by using an expert panel and calculating the content validity ratio. The criterion related validity was estimated by the correlation between the score of the Cat-ch-Ing instrument and the score of an earlier developed and used audit instrument. The results were then tested by using Pearson's correlation coefficient. Results—The new audit instrument, named Cat-ch-Ing, consists of 17 questions designed to judge the nursing documentation. Both quantity and quality variables are judged on a rating scale from zero to three, with a maximum score of 80. The inter-rater reliability coefficients were 0.98, 0.98, and 0.92, respectively for each group of 20 records, the content validity ratio ranged between 0.20 and 1.0 and the criterion related validity showed a significant correlation of r = 0.68 (p< 0.0001, 95% CI 0.57 to 0.76) between the two audit instruments. Conclusion—The Cat-ch-Ing instrument has proved to be a valid and reliable audit instrument for nursing records when the VIPS model is used as the basis of the documentation. (Quality in Health Care 2000;9:6–13) Key Words: audit instrument; nursing care plans; quality assurance PMID:10848373

Health-related quality of life in children with dysphonia and validation of the French Pediatric Voice Handicap Index.

PubMed

Oddon, P A; Boucekine, M; Boyer, L; Triglia, J M; Nicollas, R

2018-01-01

voice disorders are common in the pediatric population and can negatively affect children's quality of life. The pediatric voice handicap Index (pVHI) is a valid instrument to assess parental perception of their children voice but it is not translated into French language. The aim of the present study was to adapt a French version of the pVHI and to evaluate its psychometric properties including construct validity, reliability, and some aspects of external validity. we performed a cross sectional study including 32 dysphonic children and 60 children with no history of voice problems between 3 and 12 years of age. The original pVHI was translated into French language according to forward-backward rules and then administered to parents or caregivers. Construct validity and internal consistency were explored using confirmatory factor analysis and Cronbach's alpha. The questionnaire was filled twice to assess test-retest reliability using the intra-class correlation coefficient. The external validity was explored by comparing the French pVHI total and subscales scores between dysphonic and asymptomatic children. Correlations between the French pVHI and both the perceptual GRBAS scale and the health-related quality of life (HRQOL) survey "Vécu et Santé Perçu de l'Adolescent et de l'Enfant" (VSP-Ap) were also performed. the structure of the French pVHI showed a good fit with excellent reliability (α = 0.929) and high test-retest reliability. Significant differences were found between the group of dysphonic children and the control group (p < 0.001). The French pVHI scores were positively correlated to all parameters of the GRBAS scale (p < 0.05). Significant negative correlations were found between the Functional domain of the pVHI and various domains of the VSP-Ap as Leisure Activities, Schooling and Sentimental Relationship (p < 0.05). the French pVHI is considered to be a valid and reliable instrument to assess voice-related quality of life in children with voice disorder. We recommend its use in the multidimensional protocols for assessing voice disorder in the pediatric population. Copyright © 2017. Published by Elsevier B.V.

Reliability and measurement error of active knee extension range of motion in a modified slump test position: a pilot study.

PubMed

Tucker, Neil; Reid, Duncan; McNair, Peter

2007-01-01

The slump test is a tool to assess the mechanosensitivity of the neuromeningeal structures within the vertebral canal. While some studies have investigated the reliability of aspects of this test within the same day, few have assessed the reliability across days. Therefore, the purpose of this pilot study was to investigate reliability when measuring active knee extension range of motion (AROM) in a modified slump test position within trials on a single day and across days. Ten male and ten female asymptomatic subjects, ages 20-49 (mean age 30.1, SD 6.4) participated in the study. Knee extension AROM in a modified slump position with the cervical spine in a flexed position and then in an extended position was measured via three trials on two separate days. Across three trials, knee extension AROM increased significantly with a mean magnitude of 2 degrees within days for both cervical spine positions (P>0.05). The findings showed that there was no statistically significant difference in knee extension AROM measurements across days (P>0.05). The intraclass correlation coefficients for the mean of the three trials across days were 0.96 (lower limit 95% CI: 0.90) with the cervical spine flexed and 0.93 (lower limit 95% CI: 0.83) with cervical extension. Measurement error was calculated by way of the typical error and 95% limits of agreement, and visually represented in Bland and Altman plots. The typical error for the cervical flexed and extended positions averaged across trials was 2.6 degrees and 3.3 degrees , respectively. The limits of agreement were narrow, and the Bland and Altman plots also showed minimal bias in the joint angles across days with a random distribution of errors across the range of measured angles. This study demonstrated that knee extension AROM could be reliably measured across days in subjects without pathology and that the measurement error was acceptable. Implications of variability over multiple trials are discussed. The modified set-up for the test using the Kincom dynamometer and elevated thigh position may be useful to clinical researchers in determining the mechanosensitivity of the nervous system.

Reliability and Measurement Error of Active Knee Extension Range of Motion in a Modified Slump Test Position: A Pilot Study

PubMed Central

Tucker, Neil; Reid, Duncan; McNair, Peter

2007-01-01

The slump test is a tool to assess the mechanosensitivity of the neuromeningeal structures within the vertebral canal. While some studies have investigated the reliability of aspects of this test within the same day, few have assessed the reliability across days. Therefore, the purpose of this pilot study was to investigate reliability when measuring active knee extension range of motion (AROM) in a modified slump test position within trials on a single day and across days. Ten male and ten female asymptomatic subjects, ages 20–49 (mean age 30.1, SD 6.4) participated in the study. Knee extension AROM in a modified slump position with the cervical spine in a flexed position and then in an extended position was measured via three trials on two separate days. Across three trials, knee extension AROM increased significantly with a mean magnitude of 2° within days for both cervical spine positions (P>0.05). The findings showed that there was no statistically significant difference in knee extension AROM measurements across days (P>0.05). The intraclass correlation coefficients for the mean of the three trials across days were 0.96 (lower limit 95% CI: 0.90) with the cervical spine flexed and 0.93 (lower limit 95% CI: 0.83) with cervical extension. Measurement error was calculated by way of the typical error and 95% limits of agreement, and visually represented in Bland and Altman plots. The typical error for the cervical flexed and extended positions averaged across trials was 2.6° and 3.3°, respectively. The limits of agreement were narrow, and the Bland and Altman plots also showed minimal bias in the joint angles across days with a random distribution of errors across the range of measured angles. This study demonstrated that knee extension AROM could be reliably measured across days in subjects without pathology and that the measurement error was acceptable. Implications of variability over multiple trials are discussed. The modified set-up for the test using the Kincom dynamometer and elevated thigh position may be useful to clinical researchers in determining the mechanosensitivity of the nervous system. PMID:19066666

Documentation of pharmaceutical care: Validation of an intervention oriented classification system.

PubMed

Maes, Karen A; Studer, Helene; Berger, Jérôme; Hersberger, Kurt E; Lampert, Markus L

2017-12-01

During the dispensing process, pharmacists may come across technical and clinical issues requiring a pharmaceutical intervention (PI). An intervention-oriented classification system is a helpful tool to document these PIs in a structured manner. Therefore, we developed the PharmDISC classification system (Pharmacists' Documentation of Interventions in Seamless Care). The aim of this study was to evaluate the PharmDISC system in the daily practice environment (in terms of interrater reliability, appropriateness, interpretability, acceptability, feasibility, and validity); to assess its user satisfaction, the descriptive manual, and the online training; and to explore first implementation aspects. Twenty-one pharmacists from different community pharmacies each classified 30 prescriptions requiring a PI with the PharmDISC system on 5 selected days within 5 weeks. Interrater reliability was determined using model PIs and Fleiss's kappa coefficients (κ) were calculated. User satisfaction was assessed by questionnaire with a 4-point Likert scale. The main outcome measures were interrater reliability (κ); appropriateness, interpretability, validity (ratio of completely classified PIs/all PIs); feasibility, and acceptability (user satisfaction and suggestions). The PharmDISC system reached an average substantial agreement (κ = 0.66). Of documented 519 PIs, 430 (82.9%) were completely classified. Most users found the system comprehensive (median user agreement 3 [2/3.25 quartiles]) and practical (3[2.75/3]). The PharmDISC system raised the awareness regarding drug-related problems for most users (n = 16). To facilitate its implementation, an electronic version that automatically connects to the prescription together with a task manager for PIs needing follow-up was suggested. Barriers could be time expenditure and lack of understanding the benefits. Substantial interrater reliability and acceptable user satisfaction indicate that the PharmDISC system is a valid system to document PIs in daily community pharmacy practice. © 2017 John Wiley & Sons, Ltd.

The development of 'Quality of Life Instrument for Indian Diabetes patients (QOLID): a validation and reliability study in middle and higher income groups.

PubMed

Nagpal, Jitender; Kumar, Arvind; Kakar, Sonia; Bhartia, Abhishek

2010-05-01

To develop a reliable and valid quality of life questionnaire for Indian patients with diabetes. A draft of 75 questions was prepared on the basis of expert opinion, focus group discussions, review of existing literature and detailed semi-structured interviews of patients with diabetes with the intention of including all aspects of diabetes-specific and quality of life considered relevant by patients and care providers to enable constrict validity. A Stage 2 questionnaire was then prepared with 13 domains and 54 items (questions) after expert panel review for obvious irrelevance and duplication of issues. It was administered to 150 participants visiting a diabetes center at New Delhi. Factor analysis was done using principal component method with varimax rotation. Reliability analysis was done by calculating Cronbach's Alpha. For evaluating concordant validity the questionnaire was co-administered with DQL-CTQ to 30 participants. The discriminant validity of the questionnaire was tested using 't' test for metabolic control, co-morbidities, insulin use and gender. Using principal component method 8 domains were identified on the basis of an apriori hypothesis and the scree plot. These 8 domains explained 49.9% of the total variation. 34 items (questions) were selected to represent these domains on the basis of extraction communality, factor loading, inter-item and item-total correlations. The final questionnaire has an Overall Cronbach's Alpha value of 0.894 (subscale- 0.55 to 0.85) showing high internal consistency. The questionnaire showed good concordance (product moment correlation 0.724; p = 0.001; subscale correlation - 0.457 to 0.779) with the DQL-CTQ. The overall standardized questionnaire score showed good responsiveness to metabolic control and co-morbidities establishing discriminant validity. The final version of questionnaire with 8 domains and 34 items is a reliable and valid tool for assessment of quality of life of Indian patients with diabetes.

Reliability-based optimization of an active vibration controller using evolutionary algorithms

NASA Astrophysics Data System (ADS)

Saraygord Afshari, Sajad; Pourtakdoust, Seid H.

2017-04-01

Many modern industrialized systems such as aircrafts, rotating turbines, satellite booms, etc. cannot perform their desired tasks accurately if their uninhibited structural vibrations are not controlled properly. Structural health monitoring and online reliability calculations are emerging new means to handle system imposed uncertainties. As stochastic forcing are unavoidable, in most engineering systems, it is often needed to take them into the account for the control design process. In this research, smart material technology is utilized for structural health monitoring and control in order to keep the system in a reliable performance range. In this regard, a reliability-based cost function is assigned for both controller gain optimization as well as sensor placement. The proposed scheme is implemented and verified for a wing section. Comparison of results for the frequency responses is considered to show potential applicability of the presented technique.

Reliable protocol for shear wave elastography of lower limb muscles at rest and during passive stretching.

PubMed

Dubois, Guillaume; Kheireddine, Walid; Vergari, Claudio; Bonneau, Dominique; Thoreux, Patricia; Rouch, Philippe; Tanter, Mickael; Gennisson, Jean-Luc; Skalli, Wafa

2015-09-01

Development of shear wave elastography gave access to non-invasive muscle stiffness assessment in vivo. The aim of the present study was to define a measurement protocol to be used in clinical routine for quantifying the shear modulus of lower limb muscles. Four positions were defined to evaluate shear modulus in 10 healthy subjects: parallel to the fibers, in the anterior and posterior aspects of the lower limb, at rest and during passive stretching. Reliability was first evaluated on two muscles by three operators; these measurements were repeated six times. Then, measurement reliability was compared in 11 muscles by two operators; these measurements were repeated three times. Reproducibility of shear modulus was 0.48 kPa and repeatability was 0.41 kPa, with all muscles pooled. Position did not significantly influence reliability. Shear wave elastography appeared to be an appropriate and reliable tool to evaluate the shear modulus of lower limb muscles with the proposed protocol. Copyright © 2015 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

Body postures and patterns as amplifiers of physical condition.

PubMed Central

Taylor, P W; Hasson, O; Clark, D L

2000-01-01

The question of why receivers accept a selfish signaller's message as reliable or 'honest' has fuelled ample controversy in discussions of communication. The handicap mechanism is now widely accepted as a potent constraint on cheating. Handicap signals are deemed reliable by their costs: signallers must choose between investing in the signal or in other aspects of fitness. Accordingly, resources allocated to the signal come to reflect the signaller's fitness budget and, on average, cheating is uneconomic. However, that signals may also be deemed reliable by their design, regardless of costs, is not widely appreciated. Here we briefly describe indices and amplifiers, reliable signals that may be essentially cost free. Indices are reliable because they bear a direct association with the signalled quality rather than costs. Amplifiers do not directly provide information about signaller quality, but they facilitate assessment by increasing the apparency of pre-existing cues and signals that are associated with quality. We present results of experiments involving a jumping spider (Plexippus paykulli) to illustrate how amplifiers can facilitate assessment of cues associated with physical condition without invoking the costs required for handicap signalling. PMID:10853735

Study on safety level of RC beam bridges under earthquake

NASA Astrophysics Data System (ADS)

Zhao, Jun; Lin, Junqi; Liu, Jinlong; Li, Jia

2017-08-01

This study considers uncertainties in material strengths and the modeling which have important effects on structural resistance force based on reliability theory. After analyzing the destruction mechanism of a RC bridge, structural functions and the reliability were given, then the safety level of the piers of a reinforced concrete continuous girder bridge with stochastic structural parameters against earthquake was analyzed. Using response surface method to calculate the failure probabilities of bridge piers under high-level earthquake, their seismic reliability for different damage states within the design reference period were calculated applying two-stage design, which describes seismic safety level of the built bridges to some extent.

Temporal reliability and lateralization of the resting-state language network.

PubMed

Zhu, Linlin; Fan, Yang; Zou, Qihong; Wang, Jue; Gao, Jia-Hong; Niu, Zhendong

2014-01-01

The neural processing loop of language is complex but highly associated with Broca's and Wernicke's areas. The left dominance of these two areas was the earliest observation of brain asymmetry. It was demonstrated that the language network and its functional asymmetry during resting state were reproducible across institutions. However, the temporal reliability of resting-state language network and its functional asymmetry are still short of knowledge. In this study, we established a seed-based resting-state functional connectivity analysis of language network with seed regions located at Broca's and Wernicke's areas, and investigated temporal reliability of language network and its functional asymmetry. The language network was found to be temporally reliable in both short- and long-term. In the aspect of functional asymmetry, the Broca's area was found to be left lateralized, while the Wernicke's area is mainly right lateralized. Functional asymmetry of these two areas revealed high short- and long-term reliability as well. In addition, the impact of global signal regression (GSR) on reliability of the resting-state language network was investigated, and our results demonstrated that GSR had negligible effect on the temporal reliability of the resting-state language network. Our study provided methodology basis for future cross-culture and clinical researches of resting-state language network and suggested priority of adopting seed-based functional connectivity for its high reliability.

Temporal Reliability and Lateralization of the Resting-State Language Network

PubMed Central

Zou, Qihong; Wang, Jue; Gao, Jia-Hong; Niu, Zhendong

2014-01-01

The neural processing loop of language is complex but highly associated with Broca's and Wernicke's areas. The left dominance of these two areas was the earliest observation of brain asymmetry. It was demonstrated that the language network and its functional asymmetry during resting state were reproducible across institutions. However, the temporal reliability of resting-state language network and its functional asymmetry are still short of knowledge. In this study, we established a seed-based resting-state functional connectivity analysis of language network with seed regions located at Broca's and Wernicke's areas, and investigated temporal reliability of language network and its functional asymmetry. The language network was found to be temporally reliable in both short- and long-term. In the aspect of functional asymmetry, the Broca's area was found to be left lateralized, while the Wernicke's area is mainly right lateralized. Functional asymmetry of these two areas revealed high short- and long-term reliability as well. In addition, the impact of global signal regression (GSR) on reliability of the resting-state language network was investigated, and our results demonstrated that GSR had negligible effect on the temporal reliability of the resting-state language network. Our study provided methodology basis for future cross-culture and clinical researches of resting-state language network and suggested priority of adopting seed-based functional connectivity for its high reliability. PMID:24475058

The USAID-NREL Partnership: Delivering Clean, Reliable, and Affordable Power in the Developing World

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watson, Andrea C; Leisch, Jennifer E

The U.S. Agency for International Development (USAID) and the National Renewable Energy Laboratory (NREL) are partnering to support clean, reliable, and affordable power in the developing world. The USAID-NREL Partnership helps countries with policy, planning, and deployment support for advanced energy technologies. Through this collaboration, USAID is accessing advanced energy expertise and analysis pioneered by the U.S. National Laboratory system. The Partnership addresses critical aspects of advanced energy systems including renewable energy deployment, grid modernization, distributed energy resources and storage, power sector resilience, and the data and analytical tools needed to support them.

Study of aircraft electrical power systems

NASA Technical Reports Server (NTRS)

1972-01-01

The formulation of a philosophy for devising a reliable, efficient, lightweight, and cost effective electrical power system for advanced, large transport aircraft in the 1980 to 1985 time period is discussed. The determination and recommendation for improvements in subsystems and components are also considered. All aspects of the aircraft electrical power system including generation, conversion, distribution, and utilization equipment were considered. Significant research and technology problem areas associated with the development of future power systems are identified. The design categories involved are: (1) safety-reliability, (2) power type, voltage, frequency, quality, and efficiency, (3) power control, and (4) selection of utilization equipment.

Elements of oxygen production systems using Martian atmosphere

NASA Technical Reports Server (NTRS)

Ash, R. L.; Huang, J.-K.; Johnson, P. B.; Sivertson, W. E., Jr.

1986-01-01

Hardware elements have been studied in terms of their applicability to Mars oxygen production systems. Various aspects of the system design are discussed and areas requiring further research are identified. Initial work on system reliability is discussed and a methodology for applying expert system technology to the oxygen processor is described.

An Assessment of IELTS Speaking Test

ERIC Educational Resources Information Center

Karim, Shahzad; Haq, Naushaba

2014-01-01

The present study focused on assessing the speaking test of IELTS. The assessment discussed both positive aspects and weaknesses in IELTS speaking module. The researchers had also suggested some possible measures for the improvement in IELTS speaking test and increasing its validity and reliability. The researchers had analysed and assessed IELTS…

RECOMMENDATIONS FOR RESEARCH RELATED TO BIOLOGICAL, CHEMICAL, AND ECOLOGICAL ASPECTS OF SEDIMENT PORE WATER: THE WAY FORWARD

EPA Science Inventory

Toxicity tests are useful and reliable tools for evaluating the adverse effects of chemicals discharged into aquatic ecosystems. The science of sediment toxicology evolved rapidly following the realization that sediments are a sink and a source for contaminants and that they can ...

School Climate Measurement and Analysis

ERIC Educational Resources Information Center

Faster, Darlene; Lopez, Daisy

2013-01-01

Today, school climate assessment has become an increasingly important and valued aspect of district, state, and federal policy. Recognizing that effective school climate improvement efforts are grounded in valid and reliable data, the Federal Department of Education launched the Safe and Supportive Schools grant in 2010 to provide 11 states with…

Statistical Aspects of Reliability, Maintainability, and Availability.

DTIC Science & Technology

1987-10-01

A total of 33 research reports were issued, and 35 papers were published in scientific journals or are in press. Research topics included optimal assembly of systems, multistate system theory , testing whether new is better than used nonparameter survival function estimation measuring information in censored models, generalizations of total positively and

The Word Part Levels Test

ERIC Educational Resources Information Center

Sasao, Yosuke; Webb, Stuart

2017-01-01

Knowledge of English affixes plays a significant role in increasing knowledge of words. However, few attempts have been made to create a valid and reliable measure of affix knowledge. The Word Part Levels Test (WPLT) was developed to measure three aspects of affix knowledge: form (recognition of written affix forms), meaning (knowledge of affix…

Students' Orientation towards Interpersonal Communication in Online Social Networking Sites

ERIC Educational Resources Information Center

Kayode, Bakare Kazeem; Zamzami, Ikhlas F.; Olowolayemo, Akeem

2012-01-01

Purpose: As computer-mediated communication has diffused, successive technological variations raise new questions about interpersonal impressions and several standardized instruments have been advanced in literature to asses various aspect of interpersonal attraction phenomena. The purpose of this paper is to examine the claims for reliability and…

Can Independent Judges Recognize Different Psychotherapies? An Experience with Manual-Guided Therapies.

ERIC Educational Resources Information Center

Luborsky, Lester; And Others

1982-01-01

Tested whether independent judges could recognize three different manual-guided psychotherapies, drug counseling, supportive-expressive psychotherapy, and cognitive-behavioral using a special rating form containing scales for the characteristic aspects of each type. Results indicated that manual-guided therapies can be reliably recognized.…

Wide-Bandgap MOSFET Research with Virginia Tech Graduate Students |

Science.gov Websites

Advanced Manufacturing Research | NREL Wide Bandgap MOSFET Research with Virginia Tech Wide -Bandgap MOSFET Research with Virginia Tech Graduate Students Along with graduate student fellows from Virginia Tech, NREL is researching aspects related to the reliability and prognostics of power electronic

The Relational Health Indices for Youth: An Examination of Reliability and Validity Aspects

ERIC Educational Resources Information Center

Liang, Belle; Tracy, Allison J.; Kenny, Maureen E.; Brogan, Deirdre; Gatha, Ravi

2010-01-01

Relational health, a termed coined by Liang et al. (2001) to reflect Relational-Cultural Theory concepts, is the presence of growth-fostering characteristics in significant relationships. Although growth-fostering relationships have been conceptualized as relevant across the lifespan, existing research has mainly explored the experiences of…

Marking as Judgment

ERIC Educational Resources Information Center

Brooks, Val

2012-01-01

An aspect of assessment which has received little attention compared with perennial concerns, such as standards or reliability, is the role of judgment in marking. This paper explores marking as an act of judgment, paying particular attention to the nature of judgment and the processes involved. It brings together studies which have explored…

Study of Fuze Structure and Reliability Design Based on the Direct Search Method

NASA Astrophysics Data System (ADS)

Lin, Zhang; Ning, Wang

2017-03-01

Redundant design is one of the important methods to improve the reliability of the system, but mutual coupling of multiple factors is often involved in the design. In my study, Direct Search Method is introduced into the optimum redundancy configuration for design optimization, in which, the reliability, cost, structural weight and other factors can be taken into account simultaneously, and the redundant allocation and reliability design of aircraft critical system are computed. The results show that this method is convenient and workable, and applicable to the redundancy configurations and optimization of various designs upon appropriate modifications. And this method has a good practical value.

The use of test structures for reliability prediction and process control of integrated circuits and photovoltaics

NASA Astrophysics Data System (ADS)

Trachtenberg, I.

How a reliability model might be developed with new data from accelerated stress testing, failure mechanisms, process control monitoring, and test structure evaluations is illustrated. The effects of the acceleration of temperature on operating life is discussed. Test structures that will further accelerate the failure rate are discussed. Corrosion testing is addressed. The uncoated structure is encapsulated in a variety of mold compounds and subjected to pressure-cooker testing.

Reliability of a novel, semi-quantitative scale for classification of structural brain magnetic resonance imaging in children with cerebral palsy.

PubMed

Fiori, Simona; Cioni, Giovanni; Klingels, Katrjin; Ortibus, Els; Van Gestel, Leen; Rose, Stephen; Boyd, Roslyn N; Feys, Hilde; Guzzetta, Andrea

2014-09-01

To describe the development of a novel rating scale for classification of brain structural magnetic resonance imaging (MRI) in children with cerebral palsy (CP) and to assess its interrater and intrarater reliability. The scale consists of three sections. Section 1 contains descriptive information about the patient and MRI. Section 2 contains the graphical template of brain hemispheres onto which the lesion is transposed. Section 3 contains the scoring system for the quantitative analysis of the lesion characteristics, grouped into different global scores and subscores that assess separately side, regions, and depth. A larger interrater and intrarater reliability study was performed in 34 children with CP (22 males, 12 females; mean age at scan of 9 y 5 mo [SD 3 y 3 mo], range 4 y-16 y 11 mo; Gross Motor Function Classification System level I, [n=22], II [n=10], and level III [n=2]). Very high interrater and intrarater reliability of the total score was found with indices above 0.87. Reliability coefficients of the lobar and hemispheric subscores ranged between 0.53 and 0.95. Global scores for hemispheres, basal ganglia, brain stem, and corpus callosum showed reliability coefficients above 0.65. This study presents the first visual, semi-quantitative scale for classification of brain structural MRI in children with CP. The high degree of reliability of the scale supports its potential application for investigating the relationship between brain structure and function and examining treatment response according to brain lesion severity in children with CP. © 2014 Mac Keith Press.

Modeling the Car Crash Crisis Management System Using HiLA

NASA Astrophysics Data System (ADS)

Hölzl, Matthias; Knapp, Alexander; Zhang, Gefei

An aspect-oriented modeling approach to the Car Crash Crisis Management System (CCCMS) using the High-Level Aspect (HiLA) language is described. HiLA is a language for expressing aspects for UML static structures and UML state machines. In particular, HiLA supports both a static graph transformational and a dynamic approach of applying aspects. Furthermore, it facilitates methodologically turning use case descriptions into state machines: for each main success scenario, a base state machine is developed; all extensions to this main success scenario are covered by aspects. Overall, the static structure of the CCCMS is modeled in 43 classes, the main success scenarios in 13 base machines, the use case extensions in 47 static and 31 dynamic aspects, most of which are instantiations of simple aspect templates.

Why the Major Field Test in Business Does Not Report Subscores: Reliability and Construct Validity Evidence. Research Report. ETS RR-12-11

ERIC Educational Resources Information Center

Ling, Guangming

2012-01-01

To assess the value of individual students' subscores on the Major Field Test in Business (MFT Business), I examined the test's internal structure with factor analysis and structural equation model methods, and analyzed the subscore reliabilities using the augmented scores method. Analyses of the internal structure suggested that the MFT Business…

Characterizing the reliability of a bioMEMS-based cantilever sensor

NASA Astrophysics Data System (ADS)

Bhalerao, Kaustubh D.

2004-12-01

The cantilever-based BioMEMS sensor represents one instance from many competing ideas of biosensor technology based on Micro Electro Mechanical Systems. The advancement of BioMEMS from laboratory-scale experiments to applications in the field will require standardization of their components and manufacturing procedures as well as frameworks to evaluate their performance. Reliability, the likelihood with which a system performs its intended task, is a compact mathematical description of its performance. The mathematical and statistical foundation of systems-reliability has been applied to the cantilever-based BioMEMS sensor. The sensor is designed to detect one aspect of human ovarian cancer, namely the over-expression of the folate receptor surface protein (FR-alpha). Even as the application chosen is clinically motivated, the objective of this study was to demonstrate the underlying systems-based methodology used to design, develop and evaluate the sensor. The framework development can be readily extended to other BioMEMS-based devices for disease detection and will have an impact in the rapidly growing $30 bn industry. The Unified Modeling Language (UML) is a systems-based framework for design and development of object-oriented information systems which has potential application for use in systems designed to interact with biological environments. The UML has been used to abstract and describe the application of the biosensor, to identify key components of the biosensor, and the technology needed to link them together in a coherent manner. The use of the framework is also demonstrated in computation of system reliability from first principles as a function of the structure and materials of the biosensor. The outcomes of applying the systems-based framework to the study are the following: (1) Characterizing the cantilever-based MEMS device for disease (cell) detection. (2) Development of a novel chemical interface between the analyte and the sensor that provides a degree of selectivity towards the disease. (3) Demonstrating the performance and measuring the reliability of the biosensor prototype, and (4) Identification of opportunities in technological development in order to further refine the proposed biosensor. Application of the methodology to design develop and evaluate the reliability of BioMEMS devices will be beneficial in the streamlining the growth of the BioMEMS industry, while providing a decision-support tool in comparing and adopting suitable technologies from available competing options.

Development of a nanosatellite de-orbiting system by reliability based design optimization

NASA Astrophysics Data System (ADS)

Nikbay, Melike; Acar, Pınar; Aslan, Alim Rüstem

2015-12-01

This paper presents design approaches to develop a reliable and efficient de-orbiting system for the 3USAT nanosatellite to provide a beneficial orbital decay process at the end of a mission. A de-orbiting system is initially designed by employing the aerodynamic drag augmentation principle where the structural constraints of the overall satellite system and the aerodynamic forces are taken into account. Next, an alternative de-orbiting system is designed with new considerations and further optimized using deterministic and reliability based design techniques. For the multi-objective design, the objectives are chosen to maximize the aerodynamic drag force through the maximization of the Kapton surface area while minimizing the de-orbiting system mass. The constraints are related in a deterministic manner to the required deployment force, the height of the solar panel hole and the deployment angle. The length and the number of layers of the deployable Kapton structure are used as optimization variables. In the second stage of this study, uncertainties related to both manufacturing and operating conditions of the deployable structure in space environment are considered. These uncertainties are then incorporated into the design process by using different probabilistic approaches such as Monte Carlo Simulation, the First-Order Reliability Method and the Second-Order Reliability Method. The reliability based design optimization seeks optimal solutions using the former design objectives and constraints with the inclusion of a reliability index. Finally, the de-orbiting system design alternatives generated by different approaches are investigated and the reliability based optimum design is found to yield the best solution since it significantly improves both system reliability and performance requirements.

Using implicit association tests for the assessment of implicit personality self-concepts of extraversion and neuroticism in schizophrenia.

PubMed

Suslow, Thomas; Lindner, Christian; Kugel, Harald; Egloff, Boris; Schmukle, Stefan C

2014-08-30

There is evidence from research based on self-report personality measures that schizophrenia patients tend to be lower in extraversion and higher in neuroticism than healthy individuals. Self-report personality measures assess aspects of the explicit self-concept. The Implicit Association Test (IAT) has been developed to assess aspects of implicit cognition such as implicit attitudes and implicit personality traits. The present study was conducted to investigate the applicability and reliability of the IAT in schizophrenia patients and test whether they differ from healthy individuals on implicitly measured extraversion and neuroticism. The IAT and the NEO-FFI were administered as implicit and explicit measures of extraversion and neuroticism to 34 schizophrenia patients and 45 healthy subjects. For all IAT scores satisfactory to good reliabilities were observed in the patient sample. In both study groups, IAT scores were not related to NEO-FFI scores. Schizophrenia patients were lower in implicit and explicit extraversion and higher in implicit and explicit neuroticism than healthy individuals. Our data show that the IAT can be reliably applied to schizophrenia patients and suggest that they differ from healthy individuals not only in their conscious representation but also in their implicit representation of the self with regard to neuroticism and extraversion-related characteristics. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Developing a reliable and valid instrument to assess health-affecting aspects of neighborhoods in Tehran

PubMed Central

Ghalichi, Leila; Mohammad, Kazem; Majdzadeh, Reza; Hoseini, Mostafa; Pournik, Omid; Nedjat, Saharnaz

2012-01-01

Background: Residence characteristics can affect health of residents. This paper reports the development of an instrument assessing these aspects of neighborhoods. Materials and Methods: Literature search and focus group discussions with residents were carried out and relevant items were extracted. Five experts reviewed and commented on the items. An observation instrument with 54 items was composed and completed by two independent observers in 20 randomly selected locations. Due to lack of acceptable reliability in some items, the checklist was revised. The new 22-items checklist in four categories (general characteristics, public green area characteristics, access to services and undesirable features) was completed by two independent trained observers in 28 randomly selected locations. Results: The items in the final checklist had kappa statistics ranging from 0.63 to 1, with an exception of the item assessing “presence of beggars, homeless or working/street children”, with kappa as low as 0.27 due to variability of their presence in different times. Average Kappa statistics was 0.78 for general characteristics, 0.79 for public green area characteristics, 0.84 for access to services, and 0.54 for undesirable features. Conclusion: Neighborhood and health observation instrument seems to have good reliability in city of Tehran. It can probably be used in other large cities of Iran and similar cities elsewhere. PMID:23626633

The creation and validation of an instrument to measure school STEM Culture

NASA Astrophysics Data System (ADS)

White, Christopher

Although current research exists on school culture, there is a gap in the literature on specialized aspects of culture such as STEM Culture defined as the beliefs, values, practices, resources, and challenges in STEM fields (Science, Technology, Engineering and Mathematics) within a school. The objective of this study was to create a valid and reliable instrument, the STEM Culture Assessment Tool (STEM-CAT), that measures this cultural aspect based on a survey of stakeholder groups within the school community and use empirical data to support the use of this instrument to measure STEM Culture. Items were created and face validity was determined through a focus group and expert review before a pilot study was conducted to determine reliability of the items. Once items were determined reliable, the survey was given to eight high schools and results were correlated to the percentage of seniors who self-reported whether they intend to pursue STEM fields upon graduation. The results of this study indicate further need for research to determine how the STEM-CAT correlates to STEM culture due to some inconsistencies with the dependent variable in this study. Future research could be done correlating the results of the STEM-CAT with participation in Advanced Placement science and mathematics, SAT/ACT scores in science and mathematics or the number of students who actually pursue STEM fields rather than a prediction halfway through the 12th grade.

Multiple mini-interviews: same concept, different approaches.

PubMed

Knorr, Mirjana; Hissbach, Johanna

2014-12-01

Increasing numbers of educational institutions in the medical field choose to replace their conventional admissions interviews with a multiple mini-interview (MMI) format because the latter has superior reliability values and reduces interviewer bias. As the MMI format can be adapted to the conditions of each institution, the question of under which circumstances an MMI is most expedient remains unresolved. This article systematically reviews the existing MMI literature to identify the aspects of MMI design that have impact on the reliability, validity and cost-efficiency of the format. Three electronic databases (OVID, PubMed, Web of Science) were searched for any publications in which MMIs and related approaches were discussed. Sixty-six publications were included in the analysis. Forty studies reported reliability values. Generally, raising the number of stations has more impact on reliability than raising the number of raters per station. Other factors with positive influence include the exclusion of stations that are too easy, and the use of normative anchored rating scales or skills-based rater training. Data on criterion-related validities and analyses of dimensionality were found in 31 studies. Irrespective of design differences, the relationship between MMI results and academic measures is small to zero. The McMaster University MMI predicts in-programme and licensing examination performance. Construct validity analyses are mostly exploratory and their results are inconclusive. Seven publications gave information on required resources or provided suggestions on how to save costs. The most relevant cost factors that are additional to those of conventional interviews are the costs of station development and actor payments. The MMI literature provides useful recommendations for reliable and cost-efficient MMI designs, but some important aspects have not yet been fully explored. More theory-driven research is needed concerning dimensionality and construct validity, the predictive validity of MMIs other than those of McMaster University, the comparison of station types, and a cost-efficient station development process. © 2014 John Wiley & Sons Ltd.

Urban Groundwater Mapping - Bucharest City Area Case Study

NASA Astrophysics Data System (ADS)

Gaitanaru, Dragos; Radu Gogu, Constantin; Bica, Ioan; Anghel, Leonard; Amine Boukhemacha, Mohamed; Ionita, Angela

2013-04-01

Urban Groundwater Mapping (UGM) is a generic term for a collection of procedures and techniques used to create targeted cartographic representation of the groundwater related aspects in urban areas. The urban environment alters the physical and chemical characteristics of the underneath aquifers. The scale of the pressure is controlled by the urban development in time and space. To have a clear image on the spatial and temporal distribution of different groundwater- urban structures interaction we need a set of thematic maps is needed. In the present study it is described the methodological approach used to obtain a reliable cartographic product for Bucharest City area. The first step in the current study was to identify the groundwater related problems and aspects (changes in the groundwater table, infiltration and seepage from and to the city sewer network, contamination spread to all three aquifers systems located in quaternary sedimentary formations, dewatering impact for large underground structures, management and political drawbacks). The second step was data collection and validation. In urban areas there is a big spectrum of data providers related to groundwater. Due to the fact that data is produced and distributed by different types of organizations (national agencies, private companies, municipal water regulator, etc) the validation and cross check process is mandatory. The data is stored and managed by a geospatial database. The design of the database follows an object-orientated paradigm and is easily extensible. The third step consists of a set of procedures based on a multi criteria assessment that creates the specific setup for the thematic maps. The assessment is based on the following criteria: (1) scale effect , (2) time , (3) vertical distribution and (4) type of the groundwater related problem. The final step is the cartographic representation. In this final step the urban groundwater maps are created. All the methodological steps are doubled by programmed procedures developed in a groundwater management platform for urban areas. The core of the procedures is represented by a set of well defined hydrogeological set of geospatial queries. The cartographic products (urban groundwater maps) can be used by different types of users: civil engineers, urban planners, scientist as well as decision and policies makers.

Reliability-based econometrics of aerospace structural systems: Design criteria and test options. Ph.D. Thesis - Georgia Inst. of Tech.

NASA Technical Reports Server (NTRS)

Thomas, J. M.; Hanagud, S.

1974-01-01

The design criteria and test options for aerospace structural reliability were investigated. A decision methodology was developed for selecting a combination of structural tests and structural design factors. The decision method involves the use of Bayesian statistics and statistical decision theory. Procedures are discussed for obtaining and updating data-based probabilistic strength distributions for aerospace structures when test information is available and for obtaining subjective distributions when data are not available. The techniques used in developing the distributions are explained.

Optimum structural design based on reliability and proof-load testing

NASA Technical Reports Server (NTRS)

Shinozuka, M.; Yang, J. N.

1969-01-01

Proof-load test eliminates structures with strength less than the proof load and improves the reliability value in analysis. It truncates the distribution function of strength at the proof load, thereby alleviating verification of a fitted distribution function at the lower tail portion where data are usually nonexistent.

The validity and reliability of diagnoses of work-related mental ill-health.

PubMed

O'Neill, E; McNamee, R; Agius, R; Gittins, M; Hussey, L; Turner, S

2008-11-01

To establish the reliability and validity of work-related mental ill-health diagnoses. A UK-based surveillance scheme for work-related ill-health involving occupational physicians (OPs) reporting suggests that mental ill-health incidence is increasing by around 13% per year, with anxiety, depression and "other work-related stress" being the most common diagnoses. There have been no studies of the validity and reliability of such diagnoses. Given the existence of a large network of psychiatrists (PSYs) also involved in surveillance of work-related ill-health, an opportunity arose to measure the concurrent validity and reliability of work-related mental ill-health diagnoses. 100 anonymised summaries of cases previously reported by OPs or PSYs were collected; each was sent to 5 PSYs and 5 OPs, who assigned a diagnosis and judged whether the case was work-related. Concurrent validity of the ill-health aspect of the diagnoses, and of the opinion as to work-relatedness, was assessed by comparing the overall classifications of cases by OPs and PSYs. Reliability of the diagnostic classification was measured by kappa matrices. Diagnostic proportions for PSYs and OPs demonstrated good agreement for anxiety, depression, anxiety plus depression and "stress" (11%, 34%, 27%, 14%) and (14%, 30%, 27%, 17%), respectively. In both groups, kappa coefficients were high for a psychotic diagnosis (0.78, 95% CI: 0.74 to 0.83), but not as high for anxiety (0.27, 95% CI: 0.23 to 0.32), depression (0.34, 95% CI: 0.29 to 0.38) and "stress" (0.15, 95% CI: 0.10 to 0.19). The odds ratio of classifying a case as work-related among PSYs compared to OPs was 2.39 (95% CI: 1.68 to 3.38), p<0.001. The overall agreement between OPs and PSYs on mental ill-health diagnoses suggests that OP diagnoses are valid for epidemiological purposes. However, the within-group reliability of the diagnosis "stress" is low. Given differences in judgements about work-relatedness, further research is needed to investigate this aspect of a diagnosis.

Reliability and Validity of the Early Years Physical Activity Questionnaire (EY-PAQ)

PubMed Central

Bingham, Daniel D.; Collings, Paul J.; Clemes, Stacy A.; Costa, Silvia; Santorelli, Gillian; Griffiths, Paula; Barber, Sally E.

2016-01-01

Measuring physical activity (PA) and sedentary time (ST) in young children (<5 years) is complex. Objective measures have high validity but require specialist expertise, are expensive, and can be burdensome for participants. A proxy-report instrument for young children that accurately measures PA and ST is needed. The aim of this study was to assess the reliability and validity of the Early Years Physical Activity Questionnaire (EY-PAQ). In a setting where English and Urdu are the predominant languages spoken by parents of young children, a sample of 196 parents and their young children (mean age 3.2 ± 0.8 years) from Bradford, UK took part in the study. A total of 156 (79.6%) questionnaires were completed in English and 40 (20.4%) were completed in transliterated Urdu. A total of 109 parents took part in the reliability aspect of the study, which involved completion of the EY-PAQ on two occasions (7.2 days apart; standard deviation (SD) = 1.1). All 196 participants took part in the validity aspect which involved comparison of EY-PAQ scores against accelerometry. Validty anaylsis used all data and data falling with specific MVPA and ST boundaries. Reliability was assessed using intra-class correlations (ICC) and validity by Bland–Altman plots and rank correlation coefficients. The test re-test reliability of the EY-PAQ was moderate for ST (ICC = 0.47) and fair for moderate-to-vigorous physical activity (MVPA)(ICC = 0.35). The EY-PAQ had poor agreement with accelerometer-determined ST (mean difference = −87.5 min·day−1) and good agreement for MVPA (mean difference = 7.1 min·day−1) limits of agreement were wide for all variables. The rank correlation coefficient was non-significant for ST (rho = 0.19) and significant for MVPA (rho = 0.30). The EY-PAQ has comparable validity and reliability to other PA self-report tools and is a promising population-based measure of young children’s habitual MVPA but not ST. In situations when objective methods are not possible for measurement of young children’s MVPA, the EY-PAQ may be a suitable alternative but only if boundaries are applied.

A comparison of Rasch item-fit and Cronbach's alpha item reduction analysis for the development of a Quality of Life scale for children and adolescents.

PubMed

Erhart, M; Hagquist, C; Auquier, P; Rajmil, L; Power, M; Ravens-Sieberer, U

2010-07-01

This study compares item reduction analysis based on classical test theory (maximizing Cronbach's alpha - approach A), with analysis based on the Rasch Partial Credit Model item-fit (approach B), as applied to children and adolescents' health-related quality of life (HRQoL) items. The reliability and structural, cross-cultural and known-group validity of the measures were examined. Within the European KIDSCREEN project, 3019 children and adolescents (8-18 years) from seven European countries answered 19 HRQoL items of the Physical Well-being dimension of a preliminary KIDSCREEN instrument. The Cronbach's alpha and corrected item total correlation (approach A) were compared with infit mean squares and the Q-index item-fit derived according to a partial credit model (approach B). Cross-cultural differential item functioning (DIF ordinal logistic regression approach), structural validity (confirmatory factor analysis and residual correlation) and relative validity (RV) for socio-demographic and health-related factors were calculated for approaches (A) and (B). Approach (A) led to the retention of 13 items, compared with 11 items with approach (B). The item overlap was 69% for (A) and 78% for (B). The correlation coefficient of the summated ratings was 0.93. The Cronbach's alpha was similar for both versions [0.86 (A); 0.85 (B)]. Both approaches selected some items that are not strictly unidimensional and items displaying DIF. RV ratios favoured (A) with regard to socio-demographic aspects. Approach (B) was superior in RV with regard to health-related aspects. Both types of item reduction analysis should be accompanied by additional analyses. Neither of the two approaches was universally superior with regard to cultural, structural and known-group validity. However, the results support the usability of the Rasch method for developing new HRQoL measures for children and adolescents.

Variation in Structure and Process of Care in Traumatic Brain Injury: Provider Profiles of European Neurotrauma Centers Participating in the CENTER-TBI Study.

PubMed

Cnossen, Maryse C; Polinder, Suzanne; Lingsma, Hester F; Maas, Andrew I R; Menon, David; Steyerberg, Ewout W

2016-01-01

The strength of evidence underpinning care and treatment recommendations in traumatic brain injury (TBI) is low. Comparative effectiveness research (CER) has been proposed as a framework to provide evidence for optimal care for TBI patients. The first step in CER is to map the existing variation. The aim of current study is to quantify variation in general structural and process characteristics among centers participating in the Collaborative European NeuroTrauma Effectiveness Research in Traumatic Brain Injury (CENTER-TBI) study. We designed a set of 11 provider profiling questionnaires with 321 questions about various aspects of TBI care, chosen based on literature and expert opinion. After pilot testing, questionnaires were disseminated to 71 centers from 20 countries participating in the CENTER-TBI study. Reliability of questionnaires was estimated by calculating a concordance rate among 5% duplicate questions. All 71 centers completed the questionnaires. Median concordance rate among duplicate questions was 0.85. The majority of centers were academic hospitals (n = 65, 92%), designated as a level I trauma center (n = 48, 68%) and situated in an urban location (n = 70, 99%). The availability of facilities for neuro-trauma care varied across centers; e.g. 40 (57%) had a dedicated neuro-intensive care unit (ICU), 36 (51%) had an in-hospital rehabilitation unit and the organization of the ICU was closed in 64% (n = 45) of the centers. In addition, we found wide variation in processes of care, such as the ICU admission policy and intracranial pressure monitoring policy among centers. Even among high-volume, specialized neurotrauma centers there is substantial variation in structures and processes of TBI care. This variation provides an opportunity to study effectiveness of specific aspects of TBI care and to identify best practices with CER approaches.

Probabilistic Methods for Structural Reliability and Risk

NASA Technical Reports Server (NTRS)

Chamis, Christos C.

2007-01-01

A formal method is described to quantify structural reliability and risk in the presence of a multitude of uncertainties. The method is based on the materials behavior level where primitive variables with their respective scatters are used to describe that behavior. Computational simulation is then used to propagate those uncertainties to the structural scale where reliability and risk are usually specified. A sample case is described to illustrate the effectiveness, versatility, and maturity of the method. Typical results from this method demonstrate that the method is mature and that it can be used for future strategic projections and planning to assure better, cheaper, faster products for competitive advantages in world markets. The results also indicate that the methods are suitable for predicting remaining life in aging or deteriorating structures.

The influence of utility-interactive PV system characteristics to ac power networks

NASA Astrophysics Data System (ADS)

Takeda, Y.; Takigawa, K.; Kaminosono, H.

Two basic experimental photovoltaic (PV) systems have been built for the study of variation of power quality, aspects of safety, and technical problems. One system uses a line-commutated inverter, while the other system uses a self-commutated inverter. A description is presented of the operating and generating characteristics of the two systems. The systems were connected to an ac simulated network which simulates an actual power distribution system. Attention is given to power generation characteristics, the control characteristics, the harmonics characteristics, aspects of coordination with the power network, and questions regarding the reliability of photovoltaic modules.

System reliability of randomly vibrating structures: Computational modeling and laboratory testing

NASA Astrophysics Data System (ADS)

Sundar, V. S.; Ammanagi, S.; Manohar, C. S.

2015-09-01

The problem of determination of system reliability of randomly vibrating structures arises in many application areas of engineering. We discuss in this paper approaches based on Monte Carlo simulations and laboratory testing to tackle problems of time variant system reliability estimation. The strategy we adopt is based on the application of Girsanov's transformation to the governing stochastic differential equations which enables estimation of probability of failure with significantly reduced number of samples than what is needed in a direct simulation study. Notably, we show that the ideas from Girsanov's transformation based Monte Carlo simulations can be extended to conduct laboratory testing to assess system reliability of engineering structures with reduced number of samples and hence with reduced testing times. Illustrative examples include computational studies on a 10-degree of freedom nonlinear system model and laboratory/computational investigations on road load response of an automotive system tested on a four-post test rig.

Adaptation and Evaluation of the Neighborhood Environment Walkability Scale in India (NEWS-India).

PubMed

Adlakha, Deepti; Hipp, J Aaron; Brownson, Ross C

2016-04-02

Physical inactivity is the fourth leading risk factor for global mortality, with most of these deaths occurring in low and middle-income countries (LMICs) like India. Research from developed countries has consistently demonstrated associations between built environment features and physical activity levels of populations. The development of culturally sensitive and reliable measures of the built environment is a necessary first step for accurate analysis of environmental correlates of physical activity in LMICs. This study systematically adapted the Neighborhood Environment Walkability Scale (NEWS) for India and evaluated aspects of test-retest reliability of the adapted version among Indian adults. Cultural adaptation of the NEWS was conducted by Indian and international experts. Semi-structured interviews were conducted with local residents and key informants in the city of Chennai, India. At baseline, participants (N = 370; female = 47.2%) from Chennai completed the adapted NEWS-India surveys on perceived residential density, land use mix-diversity, land use mix-access, street connectivity, infrastructure and safety for walking and cycling, aesthetics, traffic safety, and safety from crime. NEWS-India was administered for a second time to consenting participants (N = 62; female = 53.2%) with a gap of 2-3 weeks between successive administrations. Qualitative findings demonstrated that built environment barriers and constraints to active commuting and physical activity behaviors intersected with social ecological systems. The adapted NEWS subscales had moderate to high test-retest reliability (ICC range 0.48-0.99). The NEWS-India demonstrated acceptable measurement properties among Indian adults and may be a useful tool for evaluation of built environment attributes in India. Further adaptation and evaluation in rural and suburban settings in India is essential to create a version that could be used throughout India.

Development and Validation of the Somatic Symptom Disorder-B Criteria Scale (SSD-12).

PubMed

Toussaint, Anne; Murray, Alexandra M; Voigt, Katharina; Herzog, Annabel; Gierk, Benjamin; Kroenke, Kurt; Rief, Winfried; Henningsen, Peter; Löwe, Bernd

2016-01-01

To develop and validate a new self-report questionnaire for the assessment of the psychological features of Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition somatic symptom disorder. The Somatic Symptom Disorder-B Criteria Scale (SSD-12) was developed in several steps from an initial pool of 98 items. The SSD-12 is composed of 12 items; each of the three psychological subcriteria is measured by four items. In a cross-sectional study, the SSD-12 was administered to 698 patients (65.8% female, mean [standard deviation] age = 38.79 [14.15] years) from a psychosomatic outpatient clinic. Item and scale characteristics as well as measures of reliability and validity were determined. The SSD-12 has good item characteristics and excellent reliability (Cronbach α = .95). Confirmatory factor analyses suggested that a three-factorial structure that reflects the three psychological criteria interpreted as cognitive, affective, and behavioral aspects (n = 663, Comparative Fit Index > 0.99, Tucker-Lewis Index > 0.99, Root Mean Square Error of Approximation = 0.06, 90% confidence interval = 0.01-0.08). SSD-12 total sum score was significantly associated with somatic symptom burden (r = 0.47, p < .001) and health anxiety (r = 0.71, p < .001), and moderately associated with general anxiety (r = 0.35, p < .001) and depressive symptoms (r = 0.22, p < .001). Patients with a higher SSD-12 psychological symptom burden reported higher general physical and mental health impairment and significantly higher health care use. The SSD-12 is the first self-report questionnaire that operationalizes the new psychological characteristics of Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition somatic symptom disorder. Initial assessment indicates that the SSD-12 has sufficient reliability and validity to warrant further testing in both research and clinical settings.

Relation between skin micro-topography, roughness, and skin age.

PubMed

Trojahn, C; Dobos, G; Schario, M; Ludriksone, L; Blume-Peytavi, U; Kottner, J

2015-02-01

The topography of the skin surface consists of lines, wrinkles, and scales. Primary and secondary lines form a network like structure that may be identified as polygons. Skin surface roughness measurements are widely applied in dermatological research and practice but the relation between roughness parameters and their anatomical equivalents are unclear. This study aimed to investigate whether the number of closed polygons (NCP) per measurement field can be used as a reliable parameter to measure skin surface topography. For this purpose, we analysed the relation between skin surface roughness parameters and NCP in different age groups. Images of the volar forearm skin of 38 subjects (14 children, 12 younger, and 12 older adults) were obtained with the VisioScan VC98. The NCP was counted by three independent researchers and selected roughness parameters were measured. Interrater reliability of counting the number of closed polygons and correlations between NCP, roughness parameters, and age were calculated. The mean NCP/mm² in children was 3.1 (SD 1.1), in younger adults 1.0 (SD 0.7), and in older adults 1.0 (SD 0.9). The interrater reliability was 0.9. A negative correlation of NCP/mm² with age was observed, whereas measured roughness parameters were positively associated with age. NCP/mm² was weakly related to skin roughness. The NCP/mm² is a reproducible parameter for characterizing the skin surface topography. It is proposed as an additional parameter in dermatological research and practice because it represents distinct aspects of the cutaneous profile not covered by established roughness parameters. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The Development and Piloting of Parallel Scales Measuring External and Internal HIV and Tuberculosis Stigma Among Healthcare Workers in the Free State Province, South Africa.

PubMed

Wouters, Edwin; Rau, Asta; Engelbrecht, Michelle; Uebel, Kerry; Siegel, Jacob; Masquillier, Caroline; Kigozi, Gladys; Sommerland, Nina; Yassi, Annalee

2016-05-15

The dual burden of tuberculosis and human immunodeficiency virus (HIV) is severely impacting the South African healthcare workforce. However, the use of on-site occupational health services is hampered by stigma among the healthcare workforce. The success of stigma-reduction interventions is difficult to evaluate because of a dearth of appropriate scientific tools to measure stigma in this specific professional setting. The current pilot study aimed to develop and test a range of scales measuring different aspects of stigma-internal and external stigma toward tuberculosis as well as HIV-in a South African healthcare setting. The study employed data of a sample of 200 staff members of a large hospital in Bloemfontein, South Africa. Confirmatory factor analysis produced 7 scales, displaying internal construct validity: (1) colleagues' external HIV stigma, (2) colleagues' actions against external HIV stigma, (3) respondent's external HIV stigma, (4) respondent's internal HIV stigma, (5) colleagues' external tuberculosis stigma, (6) respondent's external tuberculosis stigma, and (7) respondent's internal tuberculosis stigma. Subsequent analyses (reliability analysis, structural equation modeling) demonstrated that the scales displayed good psychometric properties in terms of reliability and external construct validity. The study outcomes support the use of the developed scales as a valid and reliable means to measure levels of tuberculosis- and HIV-related stigma among the healthcare workforce in a resource-limited context. Future studies should build on these findings to fine-tune the instruments and apply them to larger study populations across a range of different resource-limited healthcare settings with high HIV and tuberculosis prevalence. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

Utility, reliability, sensitivity and validity of an online test system designed to monitor changes in cognitive function in clinical trials.

PubMed

Wesnes, Keith A; Brooker, Helen; Ballard, Clive; McCambridge, Laura; Stenton, Robert; Corbett, Anne

2017-12-01

The advent of long-term remotely conducted clinical trials requires assessments which can be administered online. This paper considers the utility, reliability, sensitivity and validity of an internet-based system for measuring changes in cognitive function which is being used in one such trial. The Platform for Research Online to investigate Genetics and Cognition in Ageing is a 10-year longitudinal and entirely remote study launched in November 2015. The CogTrack TM System is being used to monitor changes in important aspects of cognitive function using tests of attention, information processing and episodic memory. On study entry, the participants performed CogTrack TM up to three times over seven days, and these data are evaluated in this paper. During the first six months of the study, 14 531 individuals aged 50 to 94 years enrolled and performed the CogTrack TM System, 8627 of whom completed three test sessions. On the first administration, 99.4% of the study tasks were successfully completed. Repeated testing showed training/familiarisation effects on four of the ten measures which had largely stabilised by the third test session. The factor structure of the various measures was found to be robust. Evaluation of the influence of age identified clinically relevant declines over the age range of the population on one or more measures from all tasks. The results of these analyses identify CogTrack TM to be a practical and valid method to reliably, sensitively, remotely and repeatedly collect cognitive data from large samples of individuals aged 50 and over. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

The Development and Piloting of Parallel Scales Measuring External and Internal HIV and Tuberculosis Stigma Among Healthcare Workers in the Free State Province, South Africa

PubMed Central

Wouters, Edwin; Rau, Asta; Engelbrecht, Michelle; Uebel, Kerry; Siegel, Jacob; Masquillier, Caroline; Kigozi, Gladys; Sommerland, Nina; Yassi, Annalee

2016-01-01

Background The dual burden of tuberculosis and human immunodeficiency virus (HIV) is severely impacting the South African healthcare workforce. However, the use of on-site occupational health services is hampered by stigma among the healthcare workforce. The success of stigma-reduction interventions is difficult to evaluate because of a dearth of appropriate scientific tools to measure stigma in this specific professional setting. Methods The current pilot study aimed to develop and test a range of scales measuring different aspects of stigma—internal and external stigma toward tuberculosis as well as HIV—in a South African healthcare setting. The study employed data of a sample of 200 staff members of a large hospital in Bloemfontein, South Africa. Results Confirmatory factor analysis produced 7 scales, displaying internal construct validity: (1) colleagues’ external HIV stigma, (2) colleagues’ actions against external HIV stigma, (3) respondent’s external HIV stigma, (4) respondent’s internal HIV stigma, (5) colleagues’ external tuberculosis stigma, (6) respondent’s external tuberculosis stigma, and (7) respondent’s internal tuberculosis stigma. Subsequent analyses (reliability analysis, structural equation modeling) demonstrated that the scales displayed good psychometric properties in terms of reliability and external construct validity. Conclusions The study outcomes support the use of the developed scales as a valid and reliable means to measure levels of tuberculosis- and HIV-related stigma among the healthcare workforce in a resource-limited context. Future studies should build on these findings to fine-tune the instruments and apply them to larger study populations across a range of different resource-limited healthcare settings with high HIV and tuberculosis prevalence. PMID:27118854

Adaptation and Validation of the Spanish Version of OSA-18, a Quality of Life Questionnaire for Evaluation of Children with Sleep Apnea-Hypopnea Syndrome.

PubMed

Chiner, Eusebi; Landete, Pedro; Sancho-Chust, José Norberto; Martínez-García, Miguel Ángel; Pérez-Ferrer, Patricia; Pastor, Esther; Senent, Cristina; Arlandis, Mar; Navarro, Cristina; Selma, María José

2016-11-01

To analyze the reliability and validity of the Spanish version of the OSA-18 quality of life questionnaire in children with apnea-hypopnea syndrome (SAHS). Children with suspected SAHS were studied with polysomnography (PSG) before and after adenotonsillectomy (AA). Age, gender, clinical data, PSG, anthropometric data, and Mallampati and Brodsky scales were analyzed. OSA-18 was administered at baseline and 3-6months post AA. After translation and backtranslation by bilingual professionals, the internal consistency, reliability, construct validity, concurrent validity, predictive validity and sensitivity to change of the questionnaire was assessed. In total, 45 boys and 15 girls were evaluated, showing BMI 18±4, neck 28±5, Brodsky (0: 7%; <25%: 12%; 25-50%: 27%; >50 to <75%: 45%; >75%: 6%), AHI 12±7 pre AA. Global Cronbach alpha was 0.91. Correlations between domains were significant except for emotional aspects, although the total scores correlated with all domains (0.50 to 0.90). The factorial analysis was virtually identical to the original structure. The total scores showed good correlation for concurrent validity (0.2-0.45). With regard to predictive validity, the questionnaire adequately differentiated levels of severity according to Mallampati (ANOVA P=.002) and apnea-hypopnea index (ANOVA P=.006). Test-retest reliability was excellent, as was sensitivity to change, both in the total scores (P<.001) and in each domain (P<.001). The Spanish adaptation of the OSA-18 and its psychometric characteristics suggest that the Spanish version is equivalent to the original and can be used in Spanish-speaking countries. Copyright © 2016 SEPAR. Publicado por Elsevier España, S.L.U. All rights reserved.

Adaptation and Evaluation of the Neighborhood Environment Walkability Scale in India (NEWS-India)

PubMed Central

Adlakha, Deepti; Hipp, J. Aaron; Brownson, Ross C.

2016-01-01

Physical inactivity is the fourth leading risk factor for global mortality, with most of these deaths occurring in low and middle-income countries (LMICs) like India. Research from developed countries has consistently demonstrated associations between built environment features and physical activity levels of populations. The development of culturally sensitive and reliable measures of the built environment is a necessary first step for accurate analysis of environmental correlates of physical activity in LMICs. This study systematically adapted the Neighborhood Environment Walkability Scale (NEWS) for India and evaluated aspects of test-retest reliability of the adapted version among Indian adults. Cultural adaptation of the NEWS was conducted by Indian and international experts. Semi-structured interviews were conducted with local residents and key informants in the city of Chennai, India. At baseline, participants (N = 370; female = 47.2%) from Chennai completed the adapted NEWS-India surveys on perceived residential density, land use mix-diversity, land use mix-access, street connectivity, infrastructure and safety for walking and cycling, aesthetics, traffic safety, and safety from crime. NEWS-India was administered for a second time to consenting participants (N = 62; female = 53.2%) with a gap of 2–3 weeks between successive administrations. Qualitative findings demonstrated that built environment barriers and constraints to active commuting and physical activity behaviors intersected with social ecological systems. The adapted NEWS subscales had moderate to high test-retest reliability (ICC range 0.48–0.99). The NEWS-India demonstrated acceptable measurement properties among Indian adults and may be a useful tool for evaluation of built environment attributes in India. Further adaptation and evaluation in rural and suburban settings in India is essential to create a version that could be used throughout India. PMID:27049394

Probabilistic Methods for Structural Design and Reliability

NASA Technical Reports Server (NTRS)

Chamis, Christos C.; Whitlow, Woodrow, Jr. (Technical Monitor)

2002-01-01

This report describes a formal method to quantify structural damage tolerance and reliability in the presence of a multitude of uncertainties in turbine engine components. The method is based at the material behavior level where primitive variables with their respective scatter ranges are used to describe behavior. Computational simulation is then used to propagate the uncertainties to the structural scale where damage tolerance and reliability are usually specified. Several sample cases are described to illustrate the effectiveness, versatility, and maturity of the method. Typical results from this method demonstrate, that it is mature and that it can be used to probabilistically evaluate turbine engine structural components. It may be inferred from the results that the method is suitable for probabilistically predicting the remaining life in aging or in deteriorating structures, for making strategic projections and plans, and for achieving better, cheaper, faster products that give competitive advantages in world markets.