Sample records for structural replacement drawing

  1. Alignment Pins for Assembling and Disassembling Structures

    NASA Technical Reports Server (NTRS)

    Campbell, Oliver C.

    2008-01-01

    Simple, easy-to-use, highly effective tooling has been devised for maintaining alignment of bolt holes in mating structures during assembly and disassembly of the structures. The tooling was originally used during removal of a body flap from the space shuttle Atlantis, in which misalignments during removal of the last few bolts could cause the bolts to bind in their holes. By suitably modifying the dimensions of the tooling components, the basic design of the tooling can readily be adapted to other structures that must be maintained in alignment. The tooling includes tapered, internally threaded alignment pins designed to fit in the bolt holes in one of the mating structures, plus a draw bolt and a cup that are used to install or remove each alignment pin. In preparation for disassembly of two mating structures, external supports are provided to prevent unintended movement of the structures. During disassembly of the structures, as each bolt that joins the structures is removed, an alignment pin is installed in its place. Once all the bolts have been removed and replaced with pins, the pins maintain alignment as the structures are gently pushed or pulled apart on the supports. In assembling the two structures, one reverses the procedure described above: pins are installed in the bolt holes, the structures are pulled or pushed together on the supports, then the pins are removed and replaced with bolts. The figure depicts the tooling and its use. To install an alignment pin in a bolt hole in a structural panel, the tapered end of the pin is inserted from one side of the panel, the cup is placed over the pin on the opposite side of the panel, the draw bolt is inserted through the cup and threaded into the pin, the draw bolt is tightened to pull the pin until the pin is seated firmly in the hole, then the draw bolt and cup are removed, leaving the pin in place. To remove an alignment pin, the cup is placed over the pin on the first-mentioned side of the panel, the draw bolt is inserted through the cup and threaded into the pin, then the draw bolt is tightened to pull the pin out of the hole.

  2. 77 FR 25591 - Drawbridge Operation Regulation; Intracoastal Waterway, Chesapeake, VA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-01

    ... replacing the lift joints of the drawbridge. This deviation restricts operation of the draw span, allowing... and to perform periodic maintenance. To facilitate replacement of the lift joints of the draw span...

  3. An Unexpected Expected Value.

    ERIC Educational Resources Information Center

    Schwartzman, Steven

    1993-01-01

    Discusses the surprising result that the expected number of marbles of one color drawn from a set of marbles of two colors after two draws without replacement is the same as the expected number of that color marble after two draws with replacement. Presents mathematical models to help explain this phenomenon. (MDH)

  4. 45. 'Replace Starboard Elevator and Repairs, Gould Island, Building No. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. 'Replace Starboard Elevator and Repairs, Gould Island, Building No. 35,' approved 26 July 1981, NUSC Drawing No. 80-67, NAV. FAC. Drawing No. 2,047,203. Scales as noted. - Naval Torpedo Station, Firing Pier, North end of Gould Island in Narragansett Bay, Newport, Newport County, RI

  5. Coupling Adaptation Tipping Points and Engineering Options: New Insights for Resilient Water Infrastructure Replacement Planning

    NASA Astrophysics Data System (ADS)

    Smet, K.; de Neufville, R.; van der Vlist, M.

    2017-12-01

    This work presents an innovative approach for replacement planning for aging water infrastructure given uncertain future conditions. We draw upon two existing methodologies to develop an integrated long-term replacement planning framework. We first expand the concept of Adaptation Tipping Points to generate long-term planning timelines that incorporate drivers of investment related to both internal structural processes as well as changes in external operating conditions. Then, we use Engineering Options to explore different actions taken at key moments in this timeline. Contrasting to the traditionally more static approach to infrastructure design, designing the next generation of infrastructure so it can be changed incrementally is a promising method to safeguard current investments given future uncertainty. This up-front inclusion of structural options in the system actively facilitates future adaptation, transforming uncertainty management in infrastructure planning from reactive to more proactive. A two-part model underpins this approach. A simulation model generates diverse future conditions, allowing development of timelines of intervention moments in the structure's life. This feeds into an economic model, evaluating the lifetime performance of different replacement strategies, making explicit the value of different designs and their flexibility. A proof of concept study demonstrates this approach for a pumping station. The strategic planning timelines for this structure demonstrate that moments when capital interventions become necessary due to reduced functionality from structural degradation or changed operating conditions are widely spread over the structure's life. The disparate timing of these necessary interventions supports an incremental, adaptive mindset when considering end-of-life and replacement decisions. The analysis then explores different replacement decisions, varying the size and specific options included in the proposed new structure. Results show that incremental adaptive designs and incorporating options can improve economic performance, as compared to traditional, "build it once & build it big" designs. The benefit from incorporating flexibility varies with structural functionality, future conditions and the specific options examined.

  6. Design and Drawing for Production. Syllabus. Field Test Edition II.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany.

    This syllabus, which replaces the New York State Education Department publication "Mechanical Drawing and Design," is intended for use in teaching a high school course in design and drawing for production. The materials included in the guide reflect a shift away from the conventional methods of teaching design and drawing to a greater…

  7. Military Forges Path Forward to Reduce Contingency Basing Energy Requirements

    DTIC Science & Technology

    2011-09-01

    for environmental control. Unlike earlier phase change materials APChICs replace fluid modules with capillary structures that reduce bulk and...potential leaks. Initial test results indicate the power demand to heat and cool a shelter can be significantly reduced using composite insulation...instrumented our 18 month Joint Net Zero study at the National Training Center and captured on separate recorders, data on power draw of HVAC units and

  8. Photocopy of drawing (this photograph is an 8" x 10" ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1991 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Replace windows, Building No. 45, Architectural building elevations, Sheet 2 of 2 - U.S. Naval Air Station, Equipment Shops & Offices, 206 South Avenue, Pensacola, Escambia County, FL

  9. A comparison of random draw and locally neutral models for the avifauna of an English woodland.

    PubMed

    Dolman, Andrew M; Blackburn, Tim M

    2004-06-03

    Explanations for patterns observed in the structure of local assemblages are frequently sought with reference to interactions between species, and between species and their local environment. However, analyses of null models, where non-interactive local communities are assembled from regional species pools, have demonstrated that much of the structure of local assemblages remains in simulated assemblages where local interactions have been excluded. Here we compare the ability of two null models to reproduce the breeding bird community of Eastern Wood, a 16-hectare woodland in England, UK. A random draw model, in which there is complete annual replacement of the community by immigrants from the regional pool, is compared to a locally neutral community model, in which there are two additional parameters describing the proportion of the community replaced annually (per capita death rate) and the proportion of individuals recruited locally rather than as immigrants from the regional pool. Both the random draw and locally neutral model are capable of reproducing with significant accuracy several features of the observed structure of the annual Eastern Wood breeding bird community, including species relative abundances, species richness and species composition. The two additional parameters present in the neutral model result in a qualitatively more realistic representation of the Eastern Wood breeding bird community, particularly of its dynamics through time. The fact that these parameters can be varied, allows for a close quantitative fit between model and observed communities to be achieved, particularly with respect to annual species richness and species accumulation through time. The presence of additional free parameters does not detract from the qualitative improvement in the model and the neutral model remains a model of local community structure that is null with respect to species differences at the local scale. The ability of this locally neutral model to describe a larger number of woodland bird communities with either little variation in its parameters or with variation explained by features local to the woods themselves (such as the area and isolation of a wood) will be a key subsequent test of its relevance.

  10. Program Enhances Drawings Of Three-Dimensional Objects

    NASA Technical Reports Server (NTRS)

    Hedgley, David R., Jr.

    1992-01-01

    SILHOUETTE is program for line drawings rendering any subset of polygons as silhouette. Program is improvement on, and replacement for, HIDDEN LINE COMPUTER CODE (ARC-11446). Offers combinations of silhouette and nonsilhouette specifications for arbitrary solid. Written in FORTRAN 77.

  11. 25 CFR 543.7 - What are the minimum internal control standards for bingo?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... software upgrades, data storage media replacement, etc.). The information recorded must be used when...., draw objects and back-up draw objects); and (ii) Random number generator software. (Additional information technology security standards can be found in § 543.16 of this part.) (2) The game software...

  12. 25 CFR 543.7 - What are the minimum internal control standards for bingo?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... software upgrades, data storage media replacement, etc.). The information recorded must be used when...., draw objects and back-up draw objects); and (ii) Random number generator software. (Additional information technology security standards can be found in § 543.16 of this part.) (2) The game software...

  13. Learning to Draw through Digital Modelling

    ERIC Educational Resources Information Center

    Temple, Stephen

    2016-01-01

    The education of architectural designers begins by learning drawing and digital modelling following the notion that students learn these new modes as instruments of thinking in design process. Curricular arguments persist about which mode should follow the other. Difficulties occur when one mode replaces the other. Students uninitiated to design…

  14. Closure Report for Corrective Action Unit 329: Area 22 Desert Rock Airstrip Fuel Spill with Errata Sheet, Revision 0

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Navarro Nevada Environmental Services

    In Appendix 0, Use Restriction (UR) Form, the drawing of the use restricted area shows the incorrect coordinates for the use restricted area, the coordinates on the drawing do not match the approved UR Form. The coordinates have been verified and this Errata Sheet replaces the drawing of the use restricted area with an aerial photo showing the use restricted area and the correct coordinates that match the approved UR Form.

  15. The Politics of the Academies Programme: Natality and Pluralism in Education Policy-Making

    ERIC Educational Resources Information Center

    Gunter, Helen M.; McGinity, Ruth

    2014-01-01

    Our investigations into the politics of the Academies Programme in England have generated thinking that draws on data about the conversion process from two projects. We engage with an early City Academy that replaced two "failing" schools, and a recent Academy that replaced a "successful" high school. We deploy Hannah Arendt's…

  16. Theoretical oscillation frequencies for solar-type dwarfs from stellar models with 〈3D〉-atmospheres

    NASA Astrophysics Data System (ADS)

    Jørgensen, Andreas Christ Sølvsten; Weiss, Achim; Mosumgaard, Jakob Rørsted; Silva Aguirre, Victor; Sahlholdt, Christian Lundsgaard

    2017-12-01

    We present a new method for replacing the outermost layers of stellar models with interpolated atmospheres based on results from 3D simulations, in order to correct for structural inadequacies of these layers. This replacement is known as patching. Tests, based on 3D atmospheres from three different codes and interior models with different input physics, are performed. Using solar models, we investigate how different patching criteria affect the eigenfrequencies. These criteria include the depth, at which the replacement is performed, the quantity, on which the replacement is based, and the mismatch in Teff and log g between the un-patched model and patched 3D atmosphere. We find the eigenfrequencies to be unaltered by the patching depth deep within the adiabatic region, while changing the patching quantity or the employed atmosphere grid leads to frequency shifts that may exceed 1 μHz. Likewise, the eigenfrequencies are sensitive to mismatches in Teff or log g. A thorough investigation of the accuracy of a new scheme, for interpolating mean 3D stratifications within the atmosphere grids, is furthermore performed. Throughout large parts of the atmosphere grids, our interpolation scheme yields sufficiently accurate results for the purpose of asteroseismology. We apply our procedure in asteroseismic analyses of four Kepler stars and draw the same conclusions as in the solar case: Correcting for structural deficiencies lowers the eigenfrequencies, this correction is slightly sensitive to the patching criteria, and the remaining frequency discrepancy between models and observations is less frequency dependent. Our work shows the applicability and relevance of patching in asteroseismology.

  17. The first and second generation Aussat systems

    NASA Astrophysics Data System (ADS)

    Hope, W.

    1988-12-01

    The present three-spacecraft Aussat satellite communication system is described and illustrated with extensive drawings, diagrams, and photographs; and plans for the second-generation system (Aussat-B, to begin replacing the current spacecraft in 1992) are discussed. Consideration is given to the legal status, structure, and staff of the Aussat organization; the first-generation space segment; satellite launch and orbital transfer procedures; the Aussat communication payload; the ground segment; and the current market for satellite services in Australia. For the second-generation system, topics addressed include additional and improved services, the Aussat-B procurement program, mobile satellite services, and the impact on the Australian space industry.

  18. The effect of mechano-chemical treatment on structural properties of the drawn TiNi-based alloy wire

    NASA Astrophysics Data System (ADS)

    Anikeev, Sergey; Hodorenko, Valentina; Gunther, Victor; Chekalkin, Timofey; Kang, Ji-hoon; Kang, Seung-baik

    2018-01-01

    The rapid development of biomedical materials with the advanced functional characteristics is a challenging task because of the growing demands for better material properties in-clinically employed. Modern medical devices that can be implanted into humans have evolved steadily by replacing TiNi-based alloys for titanium and stainless steel. In this study, the effect of the mechano-chemical treatment on structural properties of the matrix and surface layer of the drawn TiNi-based alloy wire was assessed. A range of samples have been prepared using different drawing and etching procedures. It is clear from the results obtained that the fabricated samples show a composite structure comprising the complex matrix and textured oxycarbonitride spitted surface layer. The suggested method of surface treatment is a concept to increase the surface roughness for the enhanced bio-performance and better in vivo integration.

  19. Applying a punch with microridges in multistage deep drawing processes.

    PubMed

    Lin, Bor-Tsuen; Yang, Cheng-Yu

    2016-01-01

    The developers of high aspect ratio components aim to minimize the processing stages in deep drawing processes. This study elucidates the application of microridge punches in multistage deep drawing processes. A microridge punch improves drawing performance, thereby reducing the number of stages required in deep forming processes. As an example, the original eight-stage deep forming process for a copper cylindrical cup with a high aspect ratio was analyzed by finite element simulation. Microridge punch designs were introduced in Stages 4 and 7 to replace the original punches. In addition, Stages 3 and 6 were eliminated. Finally, these changes were verified through experiments. The results showed that the microridge punches reduced the number of deep drawing stages yielding similar thickness difference percentages. Further, the numerical and experimental results demonstrated good consistency in the thickness distribution.

  20. 154. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    154. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) STRUCTURAL PLANS FOR MST STATION 30, SHEET S84 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  1. 40 CFR 280.112 - Drawing on financial assurance mechanisms.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... paid. The certification must be worded as follows, except that instructions in brackets are to be replaced with the relevant information and the brackets deleted: Certification of Valid Claim The...

  2. 2. Photocopy of drawing (1976 structural and electrical drawing by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Photocopy of drawing (1976 structural and electrical drawing by the Strategic Air Command, USAF) SITE PLAN, STRUCTURAL AND ELECTRICAL FOR RELOCATING WAREHOUSE, SHEET 1 OF 1 - Vandenberg Air Force Base, Space Launch Complex 3, Storage Shed, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  3. 152. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    152. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) STRUCTURAL DETAILS FOR MST STATIONS 21, 30, 39, AND 48, SHEET S98 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  4. 4. PHOTOCOPY OF DRAWING (1976 STRUCTURAL AND ELECTRICAL DRAWING BY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. PHOTOCOPY OF DRAWING (1976 STRUCTURAL AND ELECTRICAL DRAWING BY THE SPACE AND MISSILE TEST CENTER, VAFB, USAF) STRUCTURAL AND ELECTRICAL DIAGRAM FOR EQUIPMENT STORAGE BUILDING, SHEET S-26 - Vandenberg Air Force Base, Space Launch Complex 3, Storage Shed, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  5. 199. Photocopy of drawing (1976 structural drawing by the Space ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    199. Photocopy of drawing (1976 structural drawing by the Space and Missile Test Center, VAFB, USAF) STRUCTURAL DETAILS FOR THE MST STAND-TALKERS SHELTER, SHEET S24 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  6. An efficient algorithm for planar drawing of RNA structures with pseudoknots of any type.

    PubMed

    Byun, Yanga; Han, Kyungsook

    2016-06-01

    An RNA pseudoknot is a tertiary structural element in which bases of a loop pair with complementary bases are outside the loop. A drawing of RNA secondary structures is a tree, but a drawing of RNA pseudoknots is a graph that has an inner cycle within a pseudoknot and possibly outer cycles formed between the pseudoknot and other structural elements. Visualizing a large-scale RNA structure with pseudoknots as a planar drawing is challenging because a planar drawing of an RNA structure requires both pseudoknots and an entire structure enclosing the pseudoknots to be embedded into a plane without overlapping or crossing. This paper presents an efficient heuristic algorithm for visualizing a pseudoknotted RNA structure as a planar drawing. The algorithm consists of several parts for finding crossing stems and page mapping the stems, for the layout of stem-loops and pseudoknots, and for overlap detection between structural elements and resolving it. Unlike previous algorithms, our algorithm generates a planar drawing for a large RNA structure with pseudoknots of any type and provides a bracket view of the structure. It generates a compact and aesthetic structure graph for a large pseudoknotted RNA structure in O([Formula: see text]) time, where n is the number of stems of the RNA structure.

  7. Design and development of an IBM/VM menu system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cazzola, D.J.

    1992-10-01

    This report describes a full screen menu system developed using IBM's Interactive System Productivity Facility (ISPF) and the REXX programming language. The software was developed for the 2800 IBM/VM Electrical Computer Aided Design (ECAD) system. The system was developed to deliver electronic drawing definitions to a corporate drawing release system. Although this report documents the status of the menu system when it was retired, the methodologies used and the requirements defined are very applicable to replacement systems.

  8. How perceived feelings of "wellness" influence the decision-making of people with predialysis chronic kidney disease.

    PubMed

    Campbell-Crofts, Sandra; Stewart, Glenn

    2018-04-01

    To identify the subjective meanings attached to decisions made by people living with chronic kidney disease as they consider their transition to renal replacement therapy. Within the challenging world of chronic illness, people draw upon their temporal life experiences to help them make the best or most balanced primary healthcare decisions. Understanding the risks and benefits associated with these decisions has been an area of intense interest in health research. An exploratory qualitative descriptive design. A convenience sample of twelve people, at stages 3B to 5 of chronic kidney disease, attending two predialysis renal clinics in Sydney, Australia, consented to be interviewed. The semi-structured interviews centred on their decision-making experiences as they considered their transition to renal replacement therapy. Three themes emerged from participant narratives which have been framed into the following questions: (i) Do I need renal replacement therapy? (ii) What is the "right" renal replacement therapy for me? and (iii) When should I start renal replacement therapy? Decisions about the transition to renal replacement therapy were impacted upon by the participants' perceived feelings of wellness and the belief that renal replacement therapy would not be needed at any time in the foreseeable future. This study highlights the importance of optimising person-centred care and raises important issues for the education and management of people with chronic kidney disease in the predialysis stages of the illness. In order to facilitate the transition to renal replacement therapy, renal clinicians have a responsibility to more fully understand the patient journey during the predialysis stages of chronic kidney disease. A clearer understanding of patients' perceptions and decision-making experiences creates a space for mutual understanding. This is essential for the future development and implementation of collaborative, person-centred educational strategies and long-term renal healthcare outcomes. © 2017 John Wiley & Sons Ltd.

  9. The Burnt Matchstick

    ERIC Educational Resources Information Center

    Passaretti, Davide; Vistocco, Domenico

    2017-01-01

    In an informal study, two versions of a story involving probability are introduced to undergraduates. The findings reveal that students have troubles detecting equal probabilities in a sampling scheme without replacement in which no information on earlier draws is available.

  10. Design and development of an IBM/VM menu system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cazzola, D.J.

    1992-10-01

    This report describes a full screen menu system developed using IBM`s Interactive System Productivity Facility (ISPF) and the REXX programming language. The software was developed for the 2800 IBM/VM Electrical Computer Aided Design (ECAD) system. The system was developed to deliver electronic drawing definitions to a corporate drawing release system. Although this report documents the status of the menu system when it was retired, the methodologies used and the requirements defined are very applicable to replacement systems.

  11. 225. Photocopy of drawing (1967 structural drawing by General Dynamics/Astronautics) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    225. Photocopy of drawing (1967 structural drawing by General Dynamics/Astronautics) WIND DEFLECTOR FOR THE UMBILICAL MAST, SHEET S122 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  12. 158. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    158. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) FRAMING PLANS FOR MST STATION 124, SHEET S94 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  13. 40 CFR 35.905 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., architectural, legal, fiscal, or economic investigations or studies, surveys, designs, plans, working drawings... such works were designed and constructed. The term operation and maintenance includes replacement...” fittings designed for connection with those facilities. The facilities which convey waste water from...

  14. 40 CFR 35.905 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., architectural, legal, fiscal, or economic investigations or studies, surveys, designs, plans, working drawings... such works were designed and constructed. The term operation and maintenance includes replacement...” fittings designed for connection with those facilities. The facilities which convey waste water from...

  15. 40 CFR 35.905 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., architectural, legal, fiscal, or economic investigations or studies, surveys, designs, plans, working drawings... such works were designed and constructed. The term operation and maintenance includes replacement...” fittings designed for connection with those facilities. The facilities which convey waste water from...

  16. 40 CFR 35.905 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., architectural, legal, fiscal, or economic investigations or studies, surveys, designs, plans, working drawings... such works were designed and constructed. The term operation and maintenance includes replacement...” fittings designed for connection with those facilities. The facilities which convey waste water from...

  17. 40 CFR 35.905 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., architectural, legal, fiscal, or economic investigations or studies, surveys, designs, plans, working drawings... such works were designed and constructed. The term operation and maintenance includes replacement...” fittings designed for connection with those facilities. The facilities which convey waste water from...

  18. Burden of Restraint, Disablement and Ethnic Identity: A Case Study of Total Joint Replacement for Osteoarthritis

    PubMed Central

    Harrison, Tracie

    2010-01-01

    Health disparities in total joint replacement have been documented based on gender and ethnicity in multiple countries. Absent are studies exploring the meaning of the procedures among diverse women, which is necessary to fully understand the impact of the disparity. Drawing on ethnographic data from a life course exploration of disablement among Mexican American women with mobility impairments, one woman’s reasons for forgoing a joint replacement are considered. It is suggested that inequalities in disablement cannot be understood without considering the mulitple cultural conflicts and loyalties that push and pull women in multiple directions. PMID:21767094

  19. 153. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    153. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) PLANS, ELEVATIONS, AND DETAILS FOR MST STATION 3, SHEET A20 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  20. Understanding Early Elementary Children's Conceptual Knowledge of Plant Structure and Function through Drawings

    PubMed Central

    Ellis, Jane P.; Jones, Alan M.

    2014-01-01

    This study examined children's drawings to explain children's conceptual understanding of plant structure and function. The study explored whether the children's drawings accurately reflect their conceptual understanding about plants in a manner that can be interpreted by others. Drawing, survey, interview, and observational data were collected from 182 students in grades K and 1 in rural southeastern United States. Results demonstrated the children held a wide range of conceptions concerning plant structure and function. These young children held very simple ideas about plants with respect to both their structure and function. Consistent with the drawings, the interviews presented similar findings. PMID:25185222

  1. 157. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    157. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) PLANS, SECTIONS, AND DETAILS FOR MST STATION 85.5, SHEET S90 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  2. 224. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    224. Photocopy of drawing (1963 structural drawing by General Dynamics/Astronautics) UMBILICAL MAST WIND DEFLECTOR REQUIRED FOR 206 PROGRAM, PAD, SHEET S-101 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  3. The inner formal structure of the H-T-P drawings: an exploratory study.

    PubMed

    Vass, Z

    1998-08-01

    The study describes some interrelated patterns of traits of the House-Tree-Person (H-T-P) drawings with the instruments of hierarchical cluster analysis. First, according to the literature 1 7 formal or structural aspects of the projective drawings were collected, after which a detailed manual for coding was compiled. Second, the interrater reliability and the consistency of this manual was tested. Third, the hierarchical cluster structure of the reliable and consistent formal aspects was analysed. Results are: (a) a psychometrically tested coding manual of the investigated formal-structural aspects, each of them illustrated with drawings that showed the highest interrater agreement; and (b) the hierarchic cluster structure of the formal aspects of the H-T-P drawings of "normal" adults.

  4. 6. Photocopy of drawing (1976 structural drawing by the Space ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Photocopy of drawing (1976 structural drawing by the Space and Missile Test Center, VAFB, USAF) FLOOR PLAN, ELEVATIONS, SECTIONS, AND DETAILS FOR THE PYROTEST AND STORAGE BUILDING, SHEET S22 - Vandenberg Air Force Base, Space Launch Complex 3, Pyrotechnic Shed, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  5. 198. Photocopy of drawing (1976 structural drawing by the Space ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    198. Photocopy of drawing (1976 structural drawing by the Space and Missile Test Center, VAFB, USAF) FIRE RESISTIVE COATING PLAN AND ELEVATION FOR THE MST, SHEET S25 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  6. 273. Photocopy of drawing (1976 structural drawing by the Space ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    273. Photocopy of drawing (1976 structural drawing by the Space and Missile Test Center, VAFB, USAF) PLANS, ELEVATIONS, AND DETAILS OF THE CAMERA TOWERS, SHEET S20 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  7. 277. Photocopy of drawing (1979 structural drawing by StearnsRoger Incorporated) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    277. Photocopy of drawing (1979 structural drawing by Stearns-Roger Incorporated) PLANS AND SECTIONS FOR THE TIROS AND NOAA THEODOLITE STATION, SHEET 511-S-62 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  8. 21. Photocopy of drawing (1977 structural drawing by StearnsRoger Incorporated) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. Photocopy of drawing (1977 structural drawing by Stearns-Roger Incorporated) TWO-TON CAPACITY BRIDGE CRANE PLANS AND SECTIONS FOR VEHICLE SUPPORT BUILDING, SHEET 511-533 - Vandenberg Air Force Base, Space Launch Complex 3, Vehicle Support Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  9. Understanding Early Elementary Children's Conceptual Knowledge of Plant Structure and Function through Drawings

    ERIC Educational Resources Information Center

    Anderson, Janice L.; Ellis, Jane P.; Jones, Alan M.

    2014-01-01

    This study examined children's drawings to explain children's conceptual understanding of plant structure and function. The study explored whether the children's drawings accurately reflect their conceptual understanding about plants in a manner that can be interpreted by others. Drawing, survey, interview, and observational data were collected…

  10. Drawing skill is related to the efficiency of encoding object structure.

    PubMed

    Perdreau, Florian; Cavanagh, Patrick

    2014-01-01

    Accurate drawing calls on many skills beyond simple motor coordination. A good internal representation of the target object's structure is necessary to capture its proportion and shape in the drawing. Here, we assess two aspects of the perception of object structure and relate them to participants' drawing accuracy. First, we assessed drawing accuracy by computing the geometrical dissimilarity of their drawing to the target object. We then used two tasks to evaluate the efficiency of encoding object structure. First, to examine the rate of temporal encoding, we varied presentation duration of a possible versus impossible test object in the fovea using two different test sizes (8° and 28°). More skilled participants were faster at encoding an object's structure, but this difference was not affected by image size. A control experiment showed that participants skilled in drawing did not have a general advantage that might have explained their faster processing for object structure. Second, to measure the critical image size for accurate classification in the periphery, we varied image size with possible versus impossible object tests centered at two different eccentricities (3° and 8°). More skilled participants were able to categorise object structure at smaller sizes, and this advantage did not change with eccentricity. A control experiment showed that the result could not be attributed to differences in visual acuity, leaving attentional resolution as a possible explanation. Overall, we conclude that drawing accuracy is related to faster encoding of object structure and better access to crowded details.

  11. Drawing skill is related to the efficiency of encoding object structure

    PubMed Central

    Perdreau, Florian; Cavanagh, Patrick

    2014-01-01

    Accurate drawing calls on many skills beyond simple motor coordination. A good internal representation of the target object's structure is necessary to capture its proportion and shape in the drawing. Here, we assess two aspects of the perception of object structure and relate them to participants' drawing accuracy. First, we assessed drawing accuracy by computing the geometrical dissimilarity of their drawing to the target object. We then used two tasks to evaluate the efficiency of encoding object structure. First, to examine the rate of temporal encoding, we varied presentation duration of a possible versus impossible test object in the fovea using two different test sizes (8° and 28°). More skilled participants were faster at encoding an object's structure, but this difference was not affected by image size. A control experiment showed that participants skilled in drawing did not have a general advantage that might have explained their faster processing for object structure. Second, to measure the critical image size for accurate classification in the periphery, we varied image size with possible versus impossible object tests centered at two different eccentricities (3° and 8°). More skilled participants were able to categorise object structure at smaller sizes, and this advantage did not change with eccentricity. A control experiment showed that the result could not be attributed to differences in visual acuity, leaving attentional resolution as a possible explanation. Overall, we conclude that drawing accuracy is related to faster encoding of object structure and better access to crowded details. PMID:25469216

  12. 53. Photocopy of Structural drawing, dated August 6, 1976 by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    53. Photocopy of Structural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. S-4 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - FIRST FLOOR PLAN. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

  13. 55. Photocopy of Structural drawing, dated August 6, 1976 by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    55. Photocopy of Structural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. S-15 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - UTILITY BUILDING. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

  14. 54. Photocopy of Structural drawing, dated August 6, 1976 by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    54. Photocopy of Structural drawing, dated August 6, 1976 by Raytheon Company. Original drawing property of United States Air Force, 21" Space Command. S-14 - PAVE PAWS TECHNICAL FACILITY - OTIS AFB - ARRAY DETAILS. DRAWING NO. AW35-46-06 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

  15. 278. Photocopy of drawing (1978 structural electrical drawing by the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    278. Photocopy of drawing (1978 structural electrical drawing by the Space and Missile Test Center, VAFB, USAF) DETAILS, SECTION, AND ELECTRICAL PLAN FOR THE TIROS AND NOAA THEODOLITE STATION, SLC-3E, SHEET 4 OF 4 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  16. Structure A, steel shelving. Drawing no. H3300. Original drawing by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Structure A, steel shelving. Drawing no. H3-300. Original drawing by Black & Veatch, Consulting Engineers, Kansas City, Missouri, prepared for the U.S. Department of the Army, Office of Engineers, Military Construction Division, Washington D.C. dated November 5, 1951. - Travis Air Force Base, Building No. 925, W Street, Fairfield, Solano County, CA

  17. Condition Assessment Modeling for Distribution Systems Using Shared Frailty Analysis

    EPA Science Inventory

    Condition Assessment (CA) modeling is drawing increasing interest as a methodology for managing drinking water infrastructure. This paper develops a Cox Proportional Hazard (PH)/shared frailty model and applies it to the problem of investment in the repair and replacement of dri...

  18. Tracheal reconstruction with a composite graft: fascial flap-wrapped allogenic aorta with external cartilage-ring support

    PubMed Central

    Wurtz, Alain; Hysi, Ilir; Kipnis, Eric; Zawadzki, Christophe; Hubert, Thomas; Jashari, Ramadan; Copin, Marie-Christine; Jude, Brigitte

    2013-01-01

    OBJECTIVES Animal and clinical studies have demonstrated the feasibility of tracheal replacement by silicone-stented allogenic aortas. In clinical trials, however, this graft did not show mature cartilage regeneration into the grafts as was observed in animal models. To solve this issue, we investigated tracheal replacement with a composite graft based on a fascial flap-wrapped allogenic aorta with external cartilage-ring support in a rabbit model. METHODS Seven male 'Géant des Flandres' and 'New Zealand' rabbits served as donors of aortas and cartilage rings, respectively. Nineteen female 'New Zealand' rabbits were used as recipients. First, in nine animals, neoangiogenesis of the composite graft following a wrap using a pedicled lateral thoracic fascial flap and implantation under the skin of the chest wall was investigated. Animal sacrifice was scheduled at regular intervals up to 38 days. Second, 10 animals underwent tracheal replacement with the composite graft after a 7-to-9 day revascularization period, and were followed-up to death. Macroscopic and microscopic examinations were used to study the morphology, stiffness and viability of the construct. RESULTS There was one operative death after tracheal replacement. The first group of animals was found to have a satisfactory tubular morphology and stiffness of their construct associated with preserved histological structure of cartilages and moderate to severe aortic ischaemic lesions. In the group of rabbits having undergone tracheal replacement, the anatomical results were characterized by a discrepancy between the severity of ischaemic lesions involving both allogenic aorta and cartilage rings and the satisfactory biomechanical characteristics of the graft in 7 of 10 animals, probably due to cartilage calcification deposits associated with inflammatory scar tissue ensuring the stiffness of the construct. CONCLUSIONS Our investigations demonstrate the feasibility of the replacement of circumferential tracheal defects using our composite graft. Future experiments using therapeutic bronchoscopy tools are required to draw conclusions regarding the effectiveness of this tracheal substitute in the long-term. PMID:23049080

  19. Studies in Cup Drawing Behavior of Polymer Laminated Sheet Metal

    NASA Astrophysics Data System (ADS)

    Elnagmi, M.; Jain, M.; Bruhis, M.; Nielsen, K.

    2011-08-01

    Axisymmetric deep drawing behavior of a polymer laminated sheet metal (PLSM) is investigated using an axisymmetric cup drawing test. PLSMs are of interest as a replacement for painted finishes for automotive applications as they have the potential to achieve good quality long lasting and aesthetically appealing surfaces on stamped parts. However, there is limited understanding of PLSMs in automotive deep drawing situations to produce complex 3-D parts. The tests are carried out using well-controlled, laboratory-based, dual-action, servo-hydraulic forming presses under blank-holder force and punch displacement control conditions. An optical strain mapping system is used to measure the surface strains (and to construct 3D strain maps) from the film side of the deformed samples for a range of forming conditions. Deep drawing characteristics such as punch load versus punch displacement traces, strain distribution along the cup profile, flange wrinkling and fracture characteristics are experimentally assessed for stainless steel-plastic film laminated sheet materials. Also the effect of lamination pressure on wrinkling and delamination is investigated for a decorative pressure sensitive adhesive film affixed to the stainless steel sheet.

  20. Influence of the pressure dependent coefficient of friction on deep drawing springback predictions

    NASA Astrophysics Data System (ADS)

    Gil, Imanol; Galdos, Lander; Mendiguren, Joseba; Mugarra, Endika; Sáenz de Argandoña, Eneko

    2016-10-01

    This research studies the effect of considering an advanced variable friction coefficient on the springback prediction of stamping processes. Traditional constant coefficient of friction considerations are being replaced by more advanced friction coefficient definitions. The aim of this work is to show the influence of defining a pressure dependent friction coefficient on numerical springback predictions of a DX54D mild steel, a HSLA380 and a DP780 high strength steel. The pressure dependent friction model of each material was fitted to the experimental data obtained by Strip Drawing tests. Then, these friction models were implemented in a numerical simulation of a drawing process of an industrial automotive part. The results showed important differences between defining a pressure dependent friction coefficient or a constant friction coefficient.

  1. Authenticity, Validity and Reliability in A-Level English Literature

    ERIC Educational Resources Information Center

    Hodgson, John

    2017-01-01

    This article discusses the use of assessment by teachers to replace external marking. It shows how professional participation and moderation can provide reliability in summative assessment, even in public examinations for older students. It draws on historical experiences of assessment for A-level English literature.

  2. Students' Knowledge about the Internal Structure of Mice and Cockroaches in Their Environment

    ERIC Educational Resources Information Center

    Kilic, Selda

    2013-01-01

    The aim of this study is to determine 9th class students knowledge about the internal structures of mice and cockroaches using drawings. Drawings of 122 students from the 9th class of a high school in the center of Konya about the internal structures of mice and cockroaches have been analyzed. Drawings were analyzed independently by two…

  3. Interim Stabilization Equipment Essential and Support Drawing Plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    KOCH, M.R.

    The purpose of this document is to list the Interim Stabilization equipment drawings that are classified as Essential or Support drawings. Essential Drawings: Those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment. Support Drawings: Those drawings identified by the facility staff that further describe the design details of structures, systems or components shown on essential drawings.

  4. A Sporting Alternative to Tenure.

    ERIC Educational Resources Information Center

    Dworkin, James B.; Johnson, Robert W.

    1979-01-01

    A revamping of the operation of the current academic labor market by drawing upon the system found in professional sports is suggested. To stimulate thought, it is proposed that rules governing free agency, professor reservation, first refusal, trading, and salary arbitration be applied to higher education to replace current, outdated procedures.…

  5. Parametric Pedagogy: Integrating Parametric CAD in Irish Post-Primary Schools

    ERIC Educational Resources Information Center

    McGarr, Oliver; Seery, Niall

    2011-01-01

    Technology education in Irish post-primary schools is undergoing significant change. In recent years the syllabi of all technology-related subjects have been revised. A new subject, Design and Communication Graphics, has replaced the traditional Technical Drawing subject. This new subject aims to develop students' spatial awareness and graphical…

  6. 1. Photographic copy of engineering drawing showing structure of Test ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photographic copy of engineering drawing showing structure of Test Stand 'B' (4215/E-16), also known as the 'Short Snorter.' California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Structural Addition - Bldg. E-12, Edwards Test Station,' drawing no. E12/1-1, 8 August 1957. - Jet Propulsion Laboratory Edwards Facility, Test Stand B, Edwards Air Force Base, Boron, Kern County, CA

  7. Research on the Applicable Method of Valuation of Pure Electric Used vehicles

    NASA Astrophysics Data System (ADS)

    Cai, yun; Tan, zhengping; Wang, yidong; Mao, pan

    2018-03-01

    With the rapid growth in the ownership of pure electric vehicles, the research on the valuation of used electric vehicles has become the key to the development of the pure electric used vehicle market. The paper analyzed the application of the three value assessment methods, current market price method, capitalized earning method and replacement cost method, in pure electric used vehicles, and draws a conclusion that the replacement cost method is more suitable for pure electric used car. At the same time, the article also conducted a parametric correction exploration research, aiming at the characteristics of pure electric vehicles and replacement cost of the constituent factors. Through the analysis of the applicability parameters of physical devaluation, functional devaluation and economic devaluation, the revised replacement cost method can be used for the valuation of purely used electric vehicles for private use.

  8. Lessons from industry: one school's transformation toward "lean" curricular governance.

    PubMed

    Stratton, Terry D; Rudy, David W; Sauer, Marlene J; Perman, Jay A; Jennings, C Darrell

    2007-04-01

    As medical education grapples with organizational calls for centralized curricular oversight, programs may be compelled to respond by establishing highly vertical, stacked governance structures. Although these models offer discrete advantages over the horizontal, compartmentalized structures they are designed to replace, they pose new challenges to ensuring curricular quality and the educational innovations that drive the curricula. The authors describe a hybrid quality-assurance (QA) governance structure introduced in 2003 at the University of Kentucky College of Medicine (UKCOM) that ensures centralized curricular oversight of the educational product while allowing individualized creative control over the educational process. Based on a Lean production model, this approach draws on industry experiences that strategically separate institutional accountability (management) for a quality curriculum from the decision-making processes required to ensure it (production). In so doing, the authors acknowledge general similarities and key differences between overseeing the manufacture of a complex product versus the education of a physician-emphasizing the structured, sequential, and measurable nature of each process. Further, the authors briefly trace the emergence of quality approaches in manufacturing and discuss the philosophical changes that accompany transition to an institutional governance system that relies on vigorous, robust performance measures to offer continuous feedback on curricular quality.

  9. Engaging Organic Chemistry Students Using ChemDraw for iPad

    ERIC Educational Resources Information Center

    Morsch, Layne A.; Lewis, Michael

    2015-01-01

    Drawing structures, mechanisms, and syntheses is a vital part of success in organic chemistry courses. ChemDraw for iPad has been used to increase classroom experiences in the preparation of high quality chemical drawings. The embedded Flick-to-Share allows for simple, real-time exchange of ChemDraw documents. ChemDraw for iPad also allows…

  10. This photocopy of an engineering drawing shows the floor plan ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    This photocopy of an engineering drawing shows the floor plan of the Liner Lab, including room functions. Austin, Field & Fry, Architects Engineers, 22311 West Third Street, Los Angeles 57, California: Edwards Test Station Complex Phase II, Jet Propulsion Laboratory, California Institute of Technology, Edwards Air Force Base, Edwards, California: "Liner Laboratory, Floor Plan and Schedules," drawing no. E33/4-2, 26 June 1962. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California - Jet Propulsion Laboratory Edwards Facility, Liner Laboratory, Edwards Air Force Base, Boron, Kern County, CA

  11. Photocopy of drawing (original drawing of War Department Theater in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of drawing (original drawing of War Department Theater in possession of MacDill Air Force Base, Civil Engineering, Tampa, Florida; 1940 architectural drawings by Construction Division, Office of the Quartermaster General)STRUCTURAL - FOUNDATIONS - MacDill Air Force Base, Base Theater, 2420 Florida Keys Avenue, Tampa, Hillsborough County, FL

  12. Mechanisms and Mitigation of Hearing Loss from Blast Injury

    DTIC Science & Technology

    2013-10-01

    Approuvé par: Approved by: Page #: Échelle / Scale: Numéro Dessin / Drawing Nbr : Titre / Title: Mise en plan par: Drawn by: Date: Finition: Pièce...horn and exible rubber coupling will be replaced with larger PVC sections. � The cross-sectional area of the horn will be reduced smoothly, and the

  13. Theorizing Justice in Chicano Families. JSRI Occasional Paper No. 43. Latino Studies Series.

    ERIC Educational Resources Information Center

    Flores-Ortiz, Yvette G.

    This paper draws on psychological research and clinical practice to outline the social and familial context of injustice in Chicano families. The forces that promote social injustice create imbalances of power within the family wherein strategies of disconnection and oppression replace familial cultural ideals, resulting in domestic violence and…

  14. Neoliberal Competition in Higher Education Today: Research, Accountability and Impact

    ERIC Educational Resources Information Center

    Olssen, Mark

    2016-01-01

    Drawing on Foucault's elaboration of neoliberalism as a positive form of state power, the ascendancy of neoliberalism in higher education in Britain is examined in terms of the displacement of public good models of governance, and their replacement with individualised incentives and performance targets, heralding new and more stringent conceptions…

  15. Is Interdisciplinarity Old News? A Disciplined Consideration of Interdisciplinarity

    ERIC Educational Resources Information Center

    Barrett, Brian D.

    2012-01-01

    This paper draws on the theory of Basil Bernstein and on more recent applications of it by Rob Moore, John Beck and Michael Young to respond to recent calls for the replacement of discipline-based university faculties and departments with "problem-based" curricula and programmes of study. It considers, particularly, the potential…

  16. District-Level Perspective on Innovative Approaches in Performance Appraisal: Integration and Refinement.

    ERIC Educational Resources Information Center

    Gray, Patrick

    The Dade County (Florida) Public School System is replacing its Teacher Assessment and Development System (TADS), initiated in 1982, with systems that draw on recent research, link teaching skills to school improvement, and recognize and reward advanced pedagogy. The comprehensive approach will integrate subordinate and peer assessment through a…

  17. Photocopy of drawing. ALTITUDE CHAMBERS “L” & “R” STRUCTURES. NASA, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of drawing. ALTITUDE CHAMBERS “L” & “R” STRUCTURES. NASA, John F. Kennedy Space Center, Florida. Drawing 68-K-L-11213, NASA KSC, November, 1968. CHAMBER “R” ELEVATION. Sheet 4 - Cape Canaveral Air Force Station, Launch Complex 39, Altitude Chambers, First Street, between Avenue D and Avenue E, Cape Canaveral, Brevard County, FL

  18. Photocopy of drawing. ALTITUDE CHAMBERS “L” & “R” STRUCTURES. NASA, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of drawing. ALTITUDE CHAMBERS “L” & “R” STRUCTURES. NASA, John F. Kennedy Space Center, Florida. Drawing 68-K-L-11213, NASA KSC, November, 1968. WORK PLATFORM DETAIL. Sheet 6 - Cape Canaveral Air Force Station, Launch Complex 39, Altitude Chambers, First Street, between Avenue D and Avenue E, Cape Canaveral, Brevard County, FL

  19. Photocopy of drawing. ALTITUDE CHAMBERS “L” & “R” STRUCTURES. NASA, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of drawing. ALTITUDE CHAMBERS “L” & “R” STRUCTURES. NASA, John F. Kennedy Space Center, Florida. Drawing 68-K-L-11213, NASA KSC, November, 1968. CHAMBER “L” ELEVATION. Sheet 3 - Cape Canaveral Air Force Station, Launch Complex 39, Altitude Chambers, First Street, between Avenue D and Avenue E, Cape Canaveral, Brevard County, FL

  20. Structure A, reinforcing details. Drawing No. H2302, as built, Original ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Structure A, reinforcing details. Drawing No. H2-302, as built, Original drawing by Black & Veatch, Consulting Engineers, Kansas City, Missouri, prepared for the U.S. Department of the Army, Office of Engineers, Military Construction Division, Washington, D.C. dated October 1, 1951. - Travis Air Force Base, Building No. 925, W Street, Fairfield, Solano County, CA

  1. 10. Photocopy of drawing, February 1958, NUCLEAR REACTOR FACILITY, STRUCTURAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Photocopy of drawing, February 1958, NUCLEAR REACTOR FACILITY, STRUCTURAL CROSS SECTION. Giffals & Vallet, Inc., L. Rosetti, Associated Architects and Engineers, Detroit, Michigan; and U.S. Army Engineer Division, New England Corps of Engineers, Boston, Massachusetts. Drawing Number 35-84-04. (Original: AMTL Engineering Division, Watertown). - Watertown Arsenal, Building No. 100, Wooley Avenue, Watertown, Middlesex County, MA

  2. Students' understanding of primary and secondary protein structure: drawing secondary protein structure reveals student understanding better than simple recognition of structures.

    PubMed

    Harle, Marissa; Towns, Marcy H

    2013-01-01

    The interdisciplinary nature of biochemistry courses requires students to use both chemistry and biology knowledge to understand biochemical concepts. Research that has focused on external representations in biochemistry has uncovered student difficulties in comprehending and interpreting external representations in addition to a fragmented understanding of fundamental biochemistry concepts. This project focuses on students' understanding of primary and secondary protein structure and drawings (representations) of hydrogen-bonding in alpha helices and beta sheets. Analysis demonstrated that students can recognize and identify primary protein structure concepts when given a polypeptide. However, when asked to draw alpha helices and beta sheets and explain the role of hydrogen bonding their drawings students exhibited a fragmented understanding that lacked coherence. Faculty are encouraged to have students draw molecular level representations to make their mental models more explicit, complete, and coherent. This is in contrast to recognition and identification tasks, which do not adequately probe mental models and molecular level understanding. © 2013 by The International Union of Biochemistry and Molecular Biology.

  3. Understanding early elementary children's conceptual knowledge of plant structure and function through drawings.

    PubMed

    Anderson, Janice L; Ellis, Jane P; Jones, Alan M

    2014-01-01

    This study examined children's drawings to explain children's conceptual understanding of plant structure and function. The study explored whether the children's drawings accurately reflect their conceptual understanding about plants in a manner that can be interpreted by others. Drawing, survey, interview, and observational data were collected from 182 students in grades K and 1 in rural southeastern United States. Results demonstrated the children held a wide range of conceptions concerning plant structure and function. These young children held very simple ideas about plants with respect to both their structure and function. Consistent with the drawings, the interviews presented similar findings. © 2014 J. L. Anderson et al. CBE—Life Sciences Education © 2014 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  4. Photocopy of drawing. ALTITUDE CHAMBERS “L” & “R” STRUCTURES. NASA, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of drawing. ALTITUDE CHAMBERS “L” & “R” STRUCTURES. NASA, John F. Kennedy Space Center, Florida. Drawing 68-K-L-11213, NASA KSC, March, 1971. DOOR LATCH MECHANISM & DOOR LATCHING RATCHET. Sheet 14 - Cape Canaveral Air Force Station, Launch Complex 39, Altitude Chambers, First Street, between Avenue D and Avenue E, Cape Canaveral, Brevard County, FL

  5. Structure A, architectural sections & details. Drawing no. H2, revised ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Structure A, architectural sections & details. Drawing no. H2, revised as-built dated October 11, 1951. Original drawing by Black & Veatch, consulting engineers, Kansas City, Missouri, prepared for the U.S. Department of the Army, Office of Engineers, Military Construction Division, Washington, D.C. dated October 1. - Travis Air Force Base, Building No. 925, W Street, Fairfield, Solano County, CA

  6. Some effects of sex, age, and household structure on family drawings of Barbadian children.

    PubMed

    Payne, M A

    1996-10-01

    An analysis of the family drawings of a nonclinical sample of 502 Barbadian children aged 7-11 years is reported. The inclusion or omission of figures and the size and positioning of the figures of parents and self were examined with reference to sex, age, and household structure. The view that cultural values about the structure of the family unit and parental roles are reflected in children's representations of their parents in family drawings was supported.

  7. Drawing dependent structures, mechanical properties and cyclization behaviors of polyacrylonitrile and polyacrylonitrile/carbon nanotube composite fibers prepared by plasticized spinning.

    PubMed

    Li, Xiang; Qin, Aiwen; Zhao, Xinzhen; Liu, Dapeng; Wang, Haiye; He, Chunju

    2015-09-14

    Drawing to change the structural properties and cyclization behaviors of the polyacrylonitrile (PAN) chains in crystalline and amorphous regions is carried out on PAN and PAN/carbon nanotube (CNT) composite fibers. Various characterization methods including Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction and thermal gravimetric analysis are used to monitor the structural evolution and cyclization behaviors of the fibers. With an increase of the draw ratio during the plasticized spinning process, the structural parameters of the fibers, i.e. crystallinity and planar zigzag conformation, are decreased at first, and then increased, which are associated with the heat exchange rate and the oriented-crystallization rate. A possible mechanism for plasticized spinning is proposed to explain the changing trends of crystallinity and planar zigzag conformation. PAN and PAN/CNT fibers exhibit various cyclization behaviors induced by drawing, e.g., the initiation temperature for the cyclization (Ti) of PAN fibers is increased with increasing draw ratio, while Ti of PAN/CNT fibers is decreased. Drawing also facilitates cyclization and lowers the percentage of β-amino nitrile for PAN/CNT fibers during the stabilization.

  8. Implementation of a timed, electronic, assessment-driven potassium-replacement protocol.

    PubMed

    Zielenski, Christopher; Crabtree, Adam; Le, Tien; Marlatt, Alyse; Ng, Dana; Tran, Alan

    2017-06-15

    The adherence to and effectiveness and safety of a timed, electronic, assessment-driven potassium-replacement protocol (TARP) were compared with an electronic nurse-driven replacement protocol (NRP) are reported. A retrospective observational study was conducted in a community hospital evaluating protocol adherence, effectiveness, and safety for 2 potassium-replacement protocols. All adults on medical units with an order for potassium replacement per protocol during the 3-month trial periods were reviewed. All patients requiring potassium replacement per protocol were included in the analysis. Adherence to the protocol was assessed by evaluating the dose of potassium administered and performance of reassessments. Effectiveness of the protocol was assessed by evaluating the time to achieve target potassium levels. Safety was assessed by evaluating the route of administration and occurrence of hyperkalemia. A total of 300 patients treated using potassium-replacement protocols required potassium replacement during the study period, with 148 patients in the NRP group requiring 491 instances of potassium replacement. In the TARP group a total of 564 instances requiring potassium replacement corresponded to 152 patients. Of the 491 instances requiring replacement in the NRP group, the correct dose was administered and reassessment performed 117 times (23.8%). Overall adherence ( p < 0.05), correct dose given ( p < 0.05), average time from blood draw to potassium replacement ( p < 0.0001), use of oral replacement ( p < 0.05), and time to achieve target potassium level within 12 hours ( p < 0.05) were significantly improved in the TARP group. The TARP improved the effectiveness and safety of potassium-replacement therapy over the traditional NRP without negatively affecting timeliness of care. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  9. Drawing lithography for microneedles: a review of fundamentals and biomedical applications.

    PubMed

    Lee, Kwang; Jung, Hyungil

    2012-10-01

    A microneedle is a three-dimensional (3D) micromechanical structure and has been in the spotlight recently as a drug delivery system (DDS). Because a microneedle delivers the target drug after penetrating the skin barrier, the therapeutic effects of microneedles proceed from its 3D structural geometry. Various types of microneedles have been fabricated using subtractive micromanufacturing methods which are based on the inherently planar two-dimensional (2D) geometries. However, traditional subtractive processes are limited for flexible structural microneedles and makes functional biomedical applications for efficient drug delivery difficult. The authors of the present study propose drawing lithography as a unique additive process for the fabrication of a microneedle directly from 2D planar substrates, thus overcoming a subtractive process shortcoming. The present article provides the first overview of the principal drawing lithography technology: fundamentals and biomedical applications. The continuous drawing technique for an ultrahigh-aspect ratio (UHAR) hollow microneedle, stepwise controlled drawing technique for a dissolving microneedle, and drawing technique with antidromic isolation for a hybrid electro-microneedle (HEM) are reviewed, and efficient biomedical applications by drawing lithography-mediated microneedles as an innovative drug and gene delivery system are described. Drawing lithography herein can provide a great breakthrough in the development of materials science and biotechnology. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Family Choice in Education: The New Imperative. Critical Issues.

    ERIC Educational Resources Information Center

    McGraw, Onalee

    Drawing on the writings of scholars in the field, this report presents the case for increased parental control over the education of children. It begins by maintaining that the American public school has fallen from favor mainly because of a decline in academic achievement and the replacement of the teaching of basic skills with social…

  11. Happy Fiasco! The National Curriculum Tests of 2008, and after

    ERIC Educational Resources Information Center

    Yarker, Patrick

    2009-01-01

    This article, which draws heavily on the Sutherland Inquiry report into the delivery of National Curriculum testing in 2008, outlines important aspects of the failure that year to report test-scores on time, considers the extent to which ministers might have been held more accountable and reviews the state of the long struggle to replace the…

  12. Selective Attention in Web Forms: An Exploratory Case Study with Older People

    ERIC Educational Resources Information Center

    Sayago, Sergio; Guijarro, Jose-Maria; Blat, Josep

    2012-01-01

    This article reports on an exploratory study aimed to identify which ways of marking required and optional fields help older people fill in web forms correctly. Drawing on a pilot study and selective attention research in ageing, modified versions of widely used forms were created, in which standard asterisks were replaced with one of three…

  13. Business Students' Choice of Short-Term or Long-Term Study Abroad Opportunities

    ERIC Educational Resources Information Center

    Fitzsimmons, Stacey R.; Flanagan, David J.; Wang, Xiaodan

    2013-01-01

    Recent years have seen a proliferation of short-term study abroad opportunities. Although they are both supplementing and replacing semester-long study abroad programs, research has focused primarily on semester (long-term) programs. We draw on the theory of planned behavior (TPB) to explore factors that predict why students choose long-term and…

  14. Drawing on the right side of the brain: a voxel-based morphometry analysis of observational drawing.

    PubMed

    Chamberlain, Rebecca; McManus, I Chris; Brunswick, Nicola; Rankin, Qona; Riley, Howard; Kanai, Ryota

    2014-08-01

    Structural brain differences in relation to expertise have been demonstrated in a number of domains including visual perception, spatial navigation, complex motor skills and musical ability. However no studies have assessed the structural differences associated with representational skills in visual art. As training artists are inclined to be a heterogeneous group in terms of their subject matter and chosen media, it was of interest to investigate whether there would be any consistent changes in neural structure in response to increasing representational drawing skill. In the current study a cohort of 44 graduate and post-graduate art students and non-art students completed drawing tasks. Scores on these tasks were then correlated with the regional grey and white matter volume in cortical and subcortical structures. An increase in grey matter density in the left anterior cerebellum and the right medial frontal gyrus was observed in relation to observational drawing ability, whereas artistic training (art students vs. non-art students) was correlated with increased grey matter density in the right precuneus. This suggests that observational drawing ability relates to changes in structures pertaining to fine motor control and procedural memory, and that artistic training in addition is associated with enhancement of structures pertaining to visual imagery. The findings corroborate the findings of small-scale fMRI studies and provide insights into the properties of the developing artistic brain. Copyright © 2014 Elsevier Inc. All rights reserved.

  15. 26. "TEST STAND, STRUCTURAL, FOUNDATION PLAN." Specifications No. ENG043535572; Drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. "TEST STAND, STRUCTURAL, FOUNDATION PLAN." Specifications No. ENG-04-353-55-72; Drawing No. 60-0912; sheet 25 of 148; file no. 1320/76. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract no. 4338, no change. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  16. Structure A, protective alarm installation details. Drawing no. H3709, revised ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Structure A, protective alarm installation details. Drawing no. H3-709, revised as-built dated August 28, 1952. Original drawing by Black & Veatch, consulting engineers, Kansas City, Missouri, prepared for the U.S. Department of the Army, Office of Engineers, Military Construction Division, Washington, D.C. dated October 1, 1951. - Travis Air Force Base, Building No. 925, W Street, Fairfield, Solano County, CA

  17. Structure A, dock reinforcing & bill of material. Drawing no. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Structure A, dock reinforcing & bill of material. Drawing no. H2-306, revised as-built dated August 13, 1953. Original drawing by Black & Veatch, consulting engineers, Kansas City, Missouri, prepared for the U.S. Department of the Army, Office of Engineers, Military Construction Division, Washington, D.C. dated October 1, 1951. - Travis Air Force Base, Building No. 925, W Street, Fairfield, Solano County, CA

  18. Drawing Disorders in Alzheimer's Disease and Other Forms of Dementia.

    PubMed

    Trojano, Luigi; Gainotti, Guido

    2016-04-21

    Drawing is a multicomponential process that can be impaired by many kinds of brain lesions. Drawing disorders are very common in Alzheimer's disease and other forms of dementia, and can provide clinical information for the distinction of the different dementing diseases. In our review we started from an overview of the neural and cognitive bases of drawing, and from a recollection of the drawing tasks more frequently used for assessing individuals with dementia. Then, we analyzed drawing disorders in dementia, paying special attention to those observed in Alzheimer's disease, from the prodromal stages of the amnesic mild cognitive impairment to the stages of full-blown dementia, both in the sporadic forms with late onset in the entorhino-hippocampal structures and in those with early onset in the posterior neocortical structures. We reviewed the drawing features that could differentiate Alzheimer's disease from vascular dementia and from the most frequent forms of degenerative dementia, namely frontotemporal dementia and Lewy body disease. Finally, we examined some peculiar aspects of drawing disorders in dementia, such as perseverations, rotations, and closing-in. We argue that a careful analysis of drawing errors helps to differentiate the different forms of dementia more than overall accuracy in drawing.

  19. R2R--software to speed the depiction of aesthetic consensus RNA secondary structures.

    PubMed

    Weinberg, Zasha; Breaker, Ronald R

    2011-01-04

    With continuing identification of novel structured noncoding RNAs, there is an increasing need to create schematic diagrams showing the consensus features of these molecules. RNA structural diagrams are typically made either with general-purpose drawing programs like Adobe Illustrator, or with automated or interactive programs specific to RNA. Unfortunately, the use of applications like Illustrator is extremely time consuming, while existing RNA-specific programs produce figures that are useful, but usually not of the same aesthetic quality as those produced at great cost in Illustrator. Additionally, most existing RNA-specific applications are designed for drawing single RNA molecules, not consensus diagrams. We created R2R, a computer program that facilitates the generation of aesthetic and readable drawings of RNA consensus diagrams in a fraction of the time required with general-purpose drawing programs. Since the inference of a consensus RNA structure typically requires a multiple-sequence alignment, the R2R user annotates the alignment with commands directing the layout and annotation of the RNA. R2R creates SVG or PDF output that can be imported into Adobe Illustrator, Inkscape or CorelDRAW. R2R can be used to create consensus sequence and secondary structure models for novel RNA structures or to revise models when new representatives for known RNA classes become available. Although R2R does not currently have a graphical user interface, it has proven useful in our efforts to create 100 schematic models of distinct noncoding RNA classes. R2R makes it possible to obtain high-quality drawings of the consensus sequence and structural models of many diverse RNA structures with a more practical amount of effort. R2R software is available at http://breaker.research.yale.edu/R2R and as an Additional file.

  20. 35. MISCELLANEOUS ARCHITECTURAL AND STRUCTURAL DETAILS. INEEL DRAWING NUMBER 200063300287106359. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    35. MISCELLANEOUS ARCHITECTURAL AND STRUCTURAL DETAILS. INEEL DRAWING NUMBER 200-0633-00-287-106359. FLUOR NUMBER 5775-CPP-633-A-9. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  1. The Relationship of Drawing and Mathematical Problem Solving: "Draw for Math" Tasks

    ERIC Educational Resources Information Center

    Edens, Kellah; Potter, Ellen

    2007-01-01

    This study examines a series of children's drawings ("Draw for Math" tasks) to determine the relationship of students' spatial understanding and mathematical problem solving. Level of spatial understanding was assessed by applying the framework of central conceptual structures suggested by Case (1996), a cognitive developmental researcher.…

  2. Fabrication of micro-optical components using femtosecond oscillator pulses

    NASA Astrophysics Data System (ADS)

    Rodrigues, Vanessa R. M.; Ramachandran, Hema; Chidangil, Santhosh; Mathur, Deepak

    2017-06-01

    With a penchant for integrated photonics and miniaturization, the fabrication of micron sized optical elements using precision laser pulse management is drawing attention due to the possibility of minimizing tolerances for collateral material damage. The work presented here deals with the design, fabrication and characterization of a range of diffractive optics - gratings, grids and Fresnel zone plates - on transparent and metallic samples. Their low volume, light weight, transmission bandwidth, high damage threshold and flexible design make them suited for replacing conventional refractive optical elements. Our one-step, mask-less, 3-D laser direct writing process is a green fabrication technique which is in stark contrast to currently popular Photo-lithography based micro-structuring. Our method provides scope for modifications on the surface as well as within the bulk of the material. The mechanism involved in the fabrication of these optics on transparent and thin metallic substrates differ from each other. Our studies show that both amplitude and phase versions of micro-structures were achieved successfully with performances bearing 98% accuracy vis-a-vis theoretical expectations.

  3. Developing an approach for teaching and learning about Lewis structures

    NASA Astrophysics Data System (ADS)

    Kaufmann, Ilana; Hamza, Karim M.; Rundgren, Carl-Johan; Eriksson, Lars

    2017-08-01

    This study explores first-year university students' reasoning as they learn to draw Lewis structures. We also present a theoretical account of the formal procedure commonly taught for drawing these structures. Students' discussions during problem-solving activities were video recorded and detailed analyses of the discussions were made through the use of practical epistemology analysis (PEA). Our results show that the formal procedure was central for drawing Lewis structures, but its use varied depending on situational aspects. Commonly, the use of individual steps of the formal procedure was contingent on experiences of chemical structures, and other information such as the characteristics of the problem given. The analysis revealed a number of patterns in how students constructed, checked and modified the structure in relation to the formal procedure and the situational aspects. We suggest that explicitly teaching the formal procedure as a process of constructing, checking and modifying might be helpful for students learning to draw Lewis structures. By doing so, the students may learn to check the accuracy of the generated structure not only in relation to the octet rule and formal charge, but also to other experiences that are not explicitly included in the formal procedure.

  4. Researchers Rebuild their Effort to Rebuild the Internet

    ERIC Educational Resources Information Center

    Young, Jeffrey R.

    2008-01-01

    Reinveting the Internet is not easy. Researchers working on a federally supported effort to design a replacement recently had to go back to the drawing board. They now think the best way to do it is to try several "best ways" instead of searching for just one--and to invite help from social scientists rather than just self-described computer…

  5. Unmanned Aerial Vehicles

    DTIC Science & Technology

    1994-05-31

    Project , which is part of the trol, Communications and Intelligence In response to congressional...direction in Program Executive Office, Cruise Mis- (C31), the working group includes repre- FY88 to consolidate the management of siles Project and Unmanned...34* Support test and evaluation of ated with the draw down of the Pioneer Invest selectively in safety potential UAV payloads system as it is replaced by the

  6. From Radical Reconstruction to Jim Crow: Education, Nation-Building, and the Making of a New Racial Order

    ERIC Educational Resources Information Center

    Smith, Christi Michelle

    2012-01-01

    Drawing on recent theories of boundary processes, status and ethnicity, I investigate processes of group-making in the post-Civil War era (1865-1905) when Americans were faced with two daunting political projects: rebuilding the nation, and creating a new racial order to replace the abolished system of bond slavery. Although scholars have…

  7. 120. Photocopy of drawing (1958 civil engineering drawing by the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    120. Photocopy of drawing (1958 civil engineering drawing by the Ralph M. Parsons Company) STRUCTURAL DETAILS OF WAVE GUIDE ENCLOSURE AND CABLE TRAY INSTALLATION FOR LAUNCH OPERATIONS BUILDING, SHEET C42 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  8. Drawing cure: children's drawings as a psychoanalytic instrument.

    PubMed

    Wittmann, Barbara

    2010-01-01

    This essay deals with the special case of drawings as psychoanalytical instruments. It aims at a theoretical understanding of the specific contribution made by children's drawings as a medium of the psychical. In the influential play technique developed by Melanie Klein, drawing continuously interacts with other symptomatic (play) actions. Nonetheless, specific functions of drawing within the play technique can be identified. The essay will discuss four crucial aspects in-depth: 1) the strengthening of the analysis's recursivity associated with the graphic artifact; 2) the opening of the analytic process facilitated by drawing; 3) the creation of a genuinely graphic mode of producing meaning that allows the child to develop a "theory" of the workings of his own psychic apparatus; and 4) the new possibilities of symbolization associated with the latter. In contrast to classical definitions of the psychological instrument, the child's drawing is a weakly structured tool that does not serve to reproduce psychic processes in an artificial, controlled setting. The introduction of drawing into the psychoanalytic cure is by no means interested in replaying past events, but in producing events suited to effecting a transformation of the synchronic structures of the unconscious.

  9. 72. SAC control center underground structure lower floor plan, drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    72. SAC control center underground structure lower floor plan, drawing number 32-02-03, dated 1 February 1955 - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Headquarters Building, 901 SAC Boulevard, Bellevue, Sarpy County, NE

  10. Developing an Approach for Teaching and Learning about Lewis Structures

    ERIC Educational Resources Information Center

    Kaufmann, Ilana; Hamza, Karim M.; Rundgren, Carl-Johan; Eriksson, Lars

    2017-01-01

    This study explores first-year university students' reasoning as they learn to draw Lewis structures. We also present a theoretical account of the formal procedure commonly taught for drawing these structures. Students' discussions during problem-solving activities were video recorded and detailed analyses of the discussions were made through the…

  11. Rosetta Structure Prediction as a Tool for Solving Difficult Molecular Replacement Problems.

    PubMed

    DiMaio, Frank

    2017-01-01

    Molecular replacement (MR), a method for solving the crystallographic phase problem using phases derived from a model of the target structure, has proven extremely valuable, accounting for the vast majority of structures solved by X-ray crystallography. However, when the resolution of data is low, or the starting model is very dissimilar to the target protein, solving structures via molecular replacement may be very challenging. In recent years, protein structure prediction methodology has emerged as a powerful tool in model building and model refinement for difficult molecular replacement problems. This chapter describes some of the tools available in Rosetta for model building and model refinement specifically geared toward difficult molecular replacement cases.

  12. Compressive strength of concrete by partial replacement of cement with metakaolin

    NASA Astrophysics Data System (ADS)

    Ganesh, Y. S. V.; Durgaiyya, P.; Shivanarayana, Ch.; Prasad, D. S. V.

    2017-07-01

    Metakaolin or calcined kaolin, other type of pozzolan, produced by calcination has the capability to replace silica fume as an alternative material. Supplementary cementitious materials have been widely used all over the world in concrete due to their economic and environmental benefits; hence, they have drawn much attention in recent years. Mineral admixtures such as fly ash, rice husk ash, silica fume etc. are more commonly used SCMs. They help in obtaining both higher performance and economy. Metakaolin is also one of such non - conventional material, which can be utilized beneficially in the construction industry. This paper presents the results of an experimental investigations carried out to find the suitability of metakaolin in production of concrete. In the present work, the results of a study carried out to investigate the effects of Metakaolin on compressive strength of concrete are presented. The referral concrete M30 was made using 43 grade OPC and the other mixes were prepared by replacing part of OPC with Metakaolin. The replacement levels were 5%, 10%, 15% and 20%(by weight) for Metakaolin. The various results, which indicate the effect of replacement of cement by metakalion on concrete, are presented in this paper to draw useful conclusions.

  13. 3. PHOTOCOPY, ARCHITECTURAL AND STRUCTURAL PLAN, ELEVATIONS, AND SECTION DRAWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. PHOTOCOPY, ARCHITECTURAL AND STRUCTURAL PLAN, ELEVATIONS, AND SECTION DRAWING FOR WATER TREATMENT PUMPING AND STORAGE BUILDING. - NIKE Missile Base SL-40, Water Treatment & Storage Building, Southern portion of launch area, southeast of Ready Building, Hecker, Monroe County, IL

  14. Cutting through the noise: an evaluative framework for research communication

    NASA Astrophysics Data System (ADS)

    Strickert, G. E.; Bradford, L. E.; Shantz, S.; Steelman, T.; Orozs, C.; Rose, I.

    2017-12-01

    With an ever-increasing amount of research, there is a parallel challenge to mobilize the research for decision making, policy development and management actions. The tradition of "loading dock" model of science to policy is under renovation, replaced by more engaging methods of research communication. Research communication falls on a continuum from passive methods (e.g. reports, social media, infographics) to more active methods (e.g. forum theatre, decision labs, and stakeholder planning, and mix media installations that blend, art, science and traditional knowledge). Drawing on a five-year water science research program in the Saskatchewan River Basin, an evaluation framework is presented that draws on a wide communities of knowledge users including: First Nation and Metis, Community Organizers, Farmers, Consultants, Researchers, and Civil Servants. A mixed method framework consisting of quantitative surveys, qualitative interviews, focus groups, and q-sorts demonstrates that participants prefer more active means of research communication to draw them into the research, but they also value more traditional and passive methods to provide more in-depth information when needed.

  15. R2R - software to speed the depiction of aesthetic consensus RNA secondary structures

    PubMed Central

    2011-01-01

    Background With continuing identification of novel structured noncoding RNAs, there is an increasing need to create schematic diagrams showing the consensus features of these molecules. RNA structural diagrams are typically made either with general-purpose drawing programs like Adobe Illustrator, or with automated or interactive programs specific to RNA. Unfortunately, the use of applications like Illustrator is extremely time consuming, while existing RNA-specific programs produce figures that are useful, but usually not of the same aesthetic quality as those produced at great cost in Illustrator. Additionally, most existing RNA-specific applications are designed for drawing single RNA molecules, not consensus diagrams. Results We created R2R, a computer program that facilitates the generation of aesthetic and readable drawings of RNA consensus diagrams in a fraction of the time required with general-purpose drawing programs. Since the inference of a consensus RNA structure typically requires a multiple-sequence alignment, the R2R user annotates the alignment with commands directing the layout and annotation of the RNA. R2R creates SVG or PDF output that can be imported into Adobe Illustrator, Inkscape or CorelDRAW. R2R can be used to create consensus sequence and secondary structure models for novel RNA structures or to revise models when new representatives for known RNA classes become available. Although R2R does not currently have a graphical user interface, it has proven useful in our efforts to create 100 schematic models of distinct noncoding RNA classes. Conclusions R2R makes it possible to obtain high-quality drawings of the consensus sequence and structural models of many diverse RNA structures with a more practical amount of effort. R2R software is available at http://breaker.research.yale.edu/R2R and as an Additional file. PMID:21205310

  16. SPERTI Gate House at control area (PER603). Floor plan, elevations, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SPERT-I Gate House at control area (PER-603). Floor plan, elevations, sections. This Gate House replaced the original gate house, for which drawings are no longer extant. F.C. Torkelson 842-SPERT-603-A-1. Date: February 1962. INEEL index no. 760-0603-00-851-151336 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

  17. Teachers as Professionals and Teachers' Identity Construction as an Ecological Construct: An Agenda for Research and Training Drawing upon a Biographical Research Process

    ERIC Educational Resources Information Center

    Lopes, Amelia

    2009-01-01

    The study of teacher identity developed greatly during the 1990s and, in a way, replaced other studies on teacher professionalism. Highlighting the interactions, emotions and cognitions in their everyday expression, these studies contributed to making visible the role of specific communities of professionals in valuing and improving professional…

  18. Structure and blood compatibility of highly oriented PLA/MWNTs composites produced by solid hot drawing.

    PubMed

    Li, Zhengqiu; Zhao, Xiaowen; Ye, Lin; Coates, Phil; Caton-Rose, Fin; Martyn, Michasel

    2014-03-01

    Highly oriented poly(lactic acid) (PLA)/multi-walled carbon nanotubes (MWNTs) composites were fabricated through solid hot drawing technology in an effort to improve the mechanical properties and blood biocompatibility of PLA as blood-contacting medical devices. It was found that proper MWNTs content and drawing orientation can improve the tensile strength and modulus of PLA dramatically. With the increase in draw ratio, the cold crystallization peak became smaller, and the glass transition and the melting peak of PLA moved to high temperature, while the crystallinity increased, and the grain size decreased, indicating the stress-induced crystallization of PLA during drawing. MWNTs showed a nucleation effect on PLA, leading to the rise in the melting temperature, increase in crystallinity and reduction of spherulite size for the composites. Moreover, the intensity of (002) diffraction of MWNTs increased with draw ratio, indicating that MWNTs were preferentially aligned and oriented during drawing. Microstructure observation demonstrated that PLA matrix had an ordered fibrillar bundle structure, and MWNTs in the composite tended to align parallel to the drawing direction. In addition, the dispersion of MWNTs in PLA was also improved by orientation. Introduction of MWNTs and drawing orientation could significantly enhance the blood compatibility of PLA by prolonging kinetic clotting time, reducing hemolysis ratio and platelet activation.

  19. Metabolic network visualization eliminating node redundance and preserving metabolic pathways

    PubMed Central

    Bourqui, Romain; Cottret, Ludovic; Lacroix, Vincent; Auber, David; Mary, Patrick; Sagot, Marie-France; Jourdan, Fabien

    2007-01-01

    Background The tools that are available to draw and to manipulate the representations of metabolism are usually restricted to metabolic pathways. This limitation becomes problematic when studying processes that span several pathways. The various attempts that have been made to draw genome-scale metabolic networks are confronted with two shortcomings: 1- they do not use contextual information which leads to dense, hard to interpret drawings, 2- they impose to fit to very constrained standards, which implies, in particular, duplicating nodes making topological analysis considerably more difficult. Results We propose a method, called MetaViz, which enables to draw a genome-scale metabolic network and that also takes into account its structuration into pathways. This method consists in two steps: a clustering step which addresses the pathway overlapping problem and a drawing step which consists in drawing the clustered graph and each cluster. Conclusion The method we propose is original and addresses new drawing issues arising from the no-duplication constraint. We do not propose a single drawing but rather several alternative ways of presenting metabolism depending on the pathway on which one wishes to focus. We believe that this provides a valuable tool to explore the pathway structure of metabolism. PMID:17608928

  20. A Fundamental Study of Stretch-Drawing Process of Sheet Metals : Single and Double Operations

    NASA Astrophysics Data System (ADS)

    Gotoh, Manabu; Kim, Young-soo; Yamashita, Minoru

    1998-05-01

    Fundamental and informative data of axisymmetric stretch-drawing of several sheet metals with thichness of 0.7 1.0 mm are presented especially for single and double operations. Very small radius is applied to the die-profile (or -shoulder) in all operations to induce wall-thinning by the effect of bending-under-tension, from which the name `stretch-drawing' comes. It is clearly demonstrated that deeper cups could be formed by the single and double stretch-drawings from smaller cirlcular blanks due to such wall-thinning action than in the usual deep-drawing of larger blanks. From this fact, it is emphasized that the deep-drawability of a sheet metal is not evaluated simply by the conventional LDR (=limiting drawing ratio), but the depth of the drawn cup should also be taken into account. Many experimental data about various metals and thicknesses given in this paper offer a valueable information on this process for more general use which recommends to replace the conventional deep-drawing process by the stretch-drawing process both for single and double operations. In the single stretch-drawing, it is also confirmed that a deeper cup can be produced by raising the blank-holding force at later stage of operation. Fracturing is found to occur at the middle section of the wall part or at the die-profile other than at the punch profile common in the usual deep-drawing process. Numerical simulation of the single stretch-drawing process is also performed by use of DYNA-3D code to confirm that a satisfactory prediction especially in the depth of the drawn-cup can be done at least in a practical sense, although this kind of numerical analysis is very difficult because of the severity or localization of deformation around the die profile. The drawn cup of SUS304 among others fractures in a couple of weeks after the operation due to the residual circumferential tensile stress, whereas that of SUS304L does not. In the double stretch-drawing, it is confirmed that very deeper cups can be produced when compared to the usual re-drawing process, which assures typically the usefulness of this operation as a practical process. Fracture often takes place circumferentially or, very peculiarly, even in a spiral mode for SUS304 at the middle of the wall part of the cup.

  1. Biology Students’ Initial Mental Model about Microorganism

    NASA Astrophysics Data System (ADS)

    Hamdiyati, Y.; Sudargo, F.; Redjeki, S.; Fitriani, A.

    2017-02-01

    The purpose of this study was to identify biology students’ initial mental model about microorganism. This research used descriptive method with 32 sixth semester biology students at Biology Education Departement-Universitas Pendidikan Indonesia as its respondents. Data was taken at the beginning of the 6th semester before respondents endure microbiology course. Instrument used to assess mental model was drawing-writing test in which it contains concepts such as structure of bacteria, archaea, virus, and fungi. Students were asked to describe their imagination about the structure of microorganisms and subsequently asked to explain the structure of microorganisms in writing through open-ended questions. Students’ response was then compared to scientists or experts’ mental models as the targeted mental model. Student mental models were categorized into five levels (levels 1-5), namely “there is no drawing/writing,” “wrong or irrelevant drawing/writing of question,” “partially correct drawing/writing,” “the drawing/writing that has some deficiencies,” and “completely correct and complete drawing/writing.” Results showed that the level of mental models through drawing or writing about the four concepts were varied. The highest level of mental models through drawing (D5) was found in the concept of bacteria, while the highest level of mental models through writing (W3) was found in the concept of bacteria, virus, and fungi. Mental model levels most commonly found in each concept through drawing-writing tests (D/W) were bacteria (D2/W2), Archaea (D1/W1 and D2/W2), virus (D3/W3), and fungi (D2/W1). From these results it is advisable to improve lectures and assessment strategy to enhance or complement students’ mental models about microorganisms.

  2. Evolution of microstructure and mechanical properties of steel in the course of pressing-drawing

    NASA Astrophysics Data System (ADS)

    Lezhnev, S. N.; Volokitina, I. E.; Volokitin, A. V.

    2017-11-01

    The combined continuous pressing-drawing process is proposed after a comprehensive analysis of available plastic structure-forming techniques taking into account the promising trends in their development. This combination of severe plastic deformation in equal-channel step die and drawing allows one to obtain a wire of desired size and shape in the cross section with an ultrafine-grained structure after a few deformation cycles. It also enables initial workpieces of any length to be processed and, therefore, allows one to obtain finished products up to several tens of meters in length. The aim of this study is to investigate the effect of new combined pressing-drawing technique of plastic deformation on the structure and mechanical properties of the steel. These studies have shown that the proposed deformation technique has a significant advantage of the techniques currently used to manufacture a steel wire.

  3. The Mediation of Tools in the Development of Formal Mathematical Concepts: The Compass and the Circle as an Example.

    ERIC Educational Resources Information Center

    Chassapis, Dimitris

    1999-01-01

    Focuses on the process by which children develop a formal mathematical concept of the circle by using various instruments to draw circles within the context of a goal-directed drawing task. Concludes that the use of the compass in circle drawing structures the circle-drawing operation in a radically different fashion than circle tracers and…

  4. Decreasing diameter fluctuation of polymer optical fiber with optimized drawing conditions

    NASA Astrophysics Data System (ADS)

    Çetinkaya, Onur; Wojcik, Grzegorz; Mergo, Pawel

    2018-05-01

    The diameter fluctuations of poly(methyl methacrylate) based polymer optical fibers, during drawing processes, have been comprehensively studied. In this study, several drawing parameters were selected for investigation; such as drawing tensions, preform diameters, preform feeding speeds, and argon flows. Varied drawing tensions were used to draw fibers, while other parameters were maintained at constant. At a later stage in the process, micro-structured polymer optical fibers were drawn under optimized drawing conditions. Fiber diameter deviations were reduced to 2.2%, when a 0.2 N drawing tension was employed during the drawing process. Higher drawing tensions led to higher diameter fluctuations. The Young’s modulus of fibers drawn with different tensions was also measured. Our results showed that fiber elasticity increased as drawing tensions decreased. The inhomogeneity of fibers was also determined by comparing the deviation of Young’s modulus.

  5. Controlled fragmentation of multimaterial fibres and films via polymer cold-drawing.

    PubMed

    Shabahang, Soroush; Tao, Guangming; Kaufman, Joshua J; Qiao, Yangyang; Wei, Lei; Bouchenot, Thomas; Gordon, Ali P; Fink, Yoel; Bai, Yuanli; Hoy, Robert S; Abouraddy, Ayman F

    2016-06-23

    Polymer cold-drawing is a process in which tensile stress reduces the diameter of a drawn fibre (or thickness of a drawn film) and orients the polymeric chains. Cold-drawing has long been used in industrial applications, including the production of flexible fibres with high tensile strength such as polyester and nylon. However, cold-drawing of a composite structure has been less studied. Here we show that in a multimaterial fibre composed of a brittle core embedded in a ductile polymer cladding, cold-drawing results in a surprising phenomenon: controllable and sequential fragmentation of the core to produce uniformly sized rods along metres of fibre, rather than the expected random or chaotic fragmentation. These embedded structures arise from mechanical-geometric instabilities associated with 'neck' propagation. Embedded, structured multimaterial threads with complex transverse geometry are thus fragmented into a periodic train of rods held stationary in the polymer cladding. These rods can then be easily extracted via selective dissolution of the cladding, or can self-heal by thermal restoration to re-form the brittle thread. Our method is also applicable to composites with flat rather than cylindrical geometries, in which case cold-drawing leads to the break-up of an embedded or coated brittle film into narrow parallel strips that are aligned normally to the drawing axis. A range of materials was explored to establish the universality of this effect, including silicon, germanium, gold, glasses, silk, polystyrene, biodegradable polymers and ice. We observe, and verify through nonlinear finite-element simulations, a linear relationship between the smallest transverse scale and the longitudinal break-up period. These results may lead to the development of dynamical and thermoreversible camouflaging via a nanoscale Venetian-blind effect, and the fabrication of large-area structured surfaces that facilitate high-sensitivity bio-detection.

  6. Controlled fragmentation of multimaterial fibres and films via polymer cold-drawing

    NASA Astrophysics Data System (ADS)

    Shabahang, Soroush; Tao, Guangming; Kaufman, Joshua J.; Qiao, Yangyang; Wei, Lei; Bouchenot, Thomas; Gordon, Ali P.; Fink, Yoel; Bai, Yuanli; Hoy, Robert S.; Abouraddy, Ayman F.

    2016-06-01

    Polymer cold-drawing is a process in which tensile stress reduces the diameter of a drawn fibre (or thickness of a drawn film) and orients the polymeric chains. Cold-drawing has long been used in industrial applications, including the production of flexible fibres with high tensile strength such as polyester and nylon. However, cold-drawing of a composite structure has been less studied. Here we show that in a multimaterial fibre composed of a brittle core embedded in a ductile polymer cladding, cold-drawing results in a surprising phenomenon: controllable and sequential fragmentation of the core to produce uniformly sized rods along metres of fibre, rather than the expected random or chaotic fragmentation. These embedded structures arise from mechanical-geometric instabilities associated with ‘neck’ propagation. Embedded, structured multimaterial threads with complex transverse geometry are thus fragmented into a periodic train of rods held stationary in the polymer cladding. These rods can then be easily extracted via selective dissolution of the cladding, or can self-heal by thermal restoration to re-form the brittle thread. Our method is also applicable to composites with flat rather than cylindrical geometries, in which case cold-drawing leads to the break-up of an embedded or coated brittle film into narrow parallel strips that are aligned normally to the drawing axis. A range of materials was explored to establish the universality of this effect, including silicon, germanium, gold, glasses, silk, polystyrene, biodegradable polymers and ice. We observe, and verify through nonlinear finite-element simulations, a linear relationship between the smallest transverse scale and the longitudinal break-up period. These results may lead to the development of dynamical and thermoreversible camouflaging via a nanoscale Venetian-blind effect, and the fabrication of large-area structured surfaces that facilitate high-sensitivity bio-detection.

  7. Two Tracks of Thought: A Structural Model of the Test for Creative Thinking-Drawing Production (TCT-DP)

    ERIC Educational Resources Information Center

    Nogueira, Sara Ibérico; Almeida, Leonor S.; Lima, Tiago Souza

    2017-01-01

    The Test for Creative Thinking-Drawing Production (TCT-DP, Urban & Jellen, 1986) is one of the most used instruments for the assessment of creative potential. Few studies exist regarding its factorial structure, and all of them were limited to using an exploratory approach. The aim of this research was to assess the factorial structure of the…

  8. Optical microsystem for analyzing engine lubricants

    NASA Astrophysics Data System (ADS)

    Scott, Andrew J.; Mabesa, Jose R., Jr.; Gorsich, David; Rathgeb, Brian; Said, Ali A.; Dugan, Mark; Haddock, Tom F.; Bado, Philippe W.

    2004-12-01

    It is possible to dramatically improve the performance, reliability, and maintainability of vehicles and other similarly complex equipment if improved sensing and diagnostics systems are available. Each year military and commercial maintenance personnel unnecessarily replace, at scheduled intervals, significant amounts of lubricant fluids in vehicles, weapon systems, and supporting equipment. Personnel draw samples of fluids and send them to test labs for analysis to determine if replacement is necessary. Systematic use of either on-board (embedded) lubricant quality analysis capabilities will save millions of dollars each year in avoided fluid changes, saved labor, prevented damage to mechanical components while providing associated environmental benefits. This paper discusses the design, the manufacturing, and the evaluation of robust optical sensors designed to monitor the condition of industrial fluids. The sensors reported are manufactured from bulk fused silica substrates. They incorporate three-dimensional micro fluidic circuitry side-by-side with three-dimensional wave guided optical networks. The manufacturing of the optical waveguides are completed using a direct-write process based on the use of femtosecond laser pulses to locally alter the structure of the glass substrate at the nano-level. The microfluidic circuitry is produced using the same femtosecond laser based process, followed by an anisotropic wet chemical etching step. Data will be presented regarding the use of these sensors to monitor the quality of engine oil and possibly some other vehicle lubricants such as hydraulic oil.

  9. A leading edge heating array and a flat surface heating array - operation, maintenance and repair manual

    NASA Technical Reports Server (NTRS)

    1975-01-01

    A general description of the leading edge/flat surface heating array is presented along with its components, assembly instructions, installation instructions, operation procedures, maintenance instructions, repair procedures, schematics, spare parts lists, engineering drawings of the array, and functional acceptance test log sheets. The proper replacement of components, correct torque values, step-by-step maintenance instructions, and pretest checkouts are described.

  10. LWS design replacement study: Optimum design and tradeoff analysis

    NASA Technical Reports Server (NTRS)

    1973-01-01

    A design for two long-wavelength (LW) focal-plane and cooler assemblies, including associated preamplifiers and post-amplifiers is presented. The focal-planes and associated electronic assemblies are intended as direct replacement hardware to be installed into the existing 24-channel multispectral scanner used with the NASA Earth Observations Aircraft Program. An organization skilled in the art of LWIR systems can fabricate and deliver the two long-wavelength focal-plane assemblies described in this report when provided with the data and drawings developed during the performance of this contract. The concepts developed during the study including the alternative approaches and selection of components are discussed. Modifications to the preliminary design as reported in a preliminary design review meeting have also been included.

  11. 11. Photocopy of drawing, February 1958. WATERTOWN ARSENAL REACTOR, SHIELD ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Photocopy of drawing, February 1958. WATERTOWN ARSENAL REACTOR, SHIELD STRUCTURE, SECTIONS, AND PLANS. Bendix Aviation Corporation; and Giffels & Vallet, Inc., L. Rosetti, Associated Architects and Engineers, Detroit, Michigan. Drawing Number 53-198. (Original: AMTL Engineering Division, Watertown). - Watertown Arsenal, Building No. 100, Wooley Avenue, Watertown, Middlesex County, MA

  12. Understanding Molecular Genetics through a Drawing-Based Activity

    ERIC Educational Resources Information Center

    Rotbain, Yosi; Marbach-Ad, Gili; Stavy, Ruth

    2005-01-01

    The activity uses drawings typically found in textbooks, engaging students in physical and mental activities such as drawing, painting and figure completion--as well as finding missing words and answering guiding questions. The activity deals with three topics: the structure of DNA, DNA replication and protein synthesis. In this study we…

  13. 13. Photographic copy of photocopy of bridge drawing, plans and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Photographic copy of photocopy of bridge drawing, plans and elevations (June 12, 1937, original drawing on file in Structures Section, Utah Department of Transportation, Salt Lake City, Utah). SHEET NO. 5 OF 6 SHEETS. - Gould Wash Bridge, Spanning Gould Wash at State Route 9, Hurricane, Washington County, UT

  14. 14. Photographic copy of photocopy of bridge drawing, reinforced rod ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Photographic copy of photocopy of bridge drawing, reinforced rod specifications (June 12, 1937, original drawing on file in Structures Section, Utah Department of Transportation, Salt Lake City, Utah). SHEET NO. 6 OF 6 SHEETS. - Gould Wash Bridge, Spanning Gould Wash at State Route 9, Hurricane, Washington County, UT

  15. Figure Structure, Figure Action, and Framing in Drawings by American and Egyptian Children.

    ERIC Educational Resources Information Center

    Wilson, Brent; Wilson, Marjorie

    1979-01-01

    The purpose of this study is to investigate the interaction of biological unfolding and culturally related factors on sequences of narrative figure drawings by American and Egyptian elementary students. Findings support hypotheses relating to the interaction of natural and nurtural influences on children's drawings. (Author/SJL)

  16. The pedagogical potential of drawing and writing in a primary science multimodal unit

    NASA Astrophysics Data System (ADS)

    Wilson, Rachel E.; Bradbury, Leslie U.

    2016-11-01

    In consideration of the potential of drawing and writing as assessment and learning tools, we explored how early primary students used these modes to communicate their science understandings. The context for this study was a curricular unit that incorporated multiple modes of representation in both the presentation of information and production of student understanding with a focus on the structure and function of carnivorous plants (CPs). Two science teacher educators and two first-grade teachers in the United States co-planned and co-taught a multimodal science unit on CP structure and function that included multiple representations of Venus flytraps (VFTs): physical specimens, photographs, videos, text, and discussions. Pre- and post-assessment student drawings and writings were statistically compared to note significant changes, and pre- and post-assessment writings were qualitatively analysed to note themes in student ideas. Results indicate that students increased their knowledge of VFT structure and function and synthesised information from multiple modes. While students included more structures of the VFT in their drawings, they were better able to describe the functions of structures in their writings. These results suggest the benefits for student learning and assessment of having early primary students represent their science understandings in multiple modes.

  17. 13. Photographic copy of original construction drawing dated May 5, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Photographic copy of original construction drawing dated May 5, 1935, from the files at the Office of the Chief Engineer, U.S. Fish and Wildlife Service Regional Office, Denver. STRUCTURAL DETAILS GATE STRUCTURE 320 - J. Clark Salyer National Wildlife Refuge, Dam 320, Along Lower Souris River, Kramer, Bottineau County, ND

  18. Process metallurgy simulation for metal drawing process optimization by using two-scale finite element method

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nakamachi, Eiji; Yoshida, Takashi; Yamaguchi, Toshihiko

    2014-10-06

    We developed two-scale FE analysis procedure based on the crystallographic homogenization method by considering the hierarchical structure of poly-crystal aluminium alloy metal. It can be characterized as the combination of two-scale structure, such as the microscopic polycrystal structure and the macroscopic elastic plastic continuum. Micro polycrystal structure can be modeled as a three dimensional representative volume element (RVE). RVE is featured as by 3×3×3 eight-nodes solid finite elements, which has 216 crystal orientations. This FE analysis code can predict the deformation, strain and stress evolutions in the wire drawing processes in the macro- scales, and further the crystal texture andmore » hardening evolutions in the micro-scale. In this study, we analyzed the texture evolution in the wire drawing processes by our two-scale FE analysis code under conditions of various drawing angles of dice. We evaluates the texture evolution in the surface and center regions of the wire cross section, and to clarify the effects of processing conditions on the texture evolution.« less

  19. Process metallurgy simulation for metal drawing process optimization by using two-scale finite element method

    NASA Astrophysics Data System (ADS)

    Nakamachi, Eiji; Yoshida, Takashi; Kuramae, Hiroyuki; Morimoto, Hideo; Yamaguchi, Toshihiko; Morita, Yusuke

    2014-10-01

    We developed two-scale FE analysis procedure based on the crystallographic homogenization method by considering the hierarchical structure of poly-crystal aluminium alloy metal. It can be characterized as the combination of two-scale structure, such as the microscopic polycrystal structure and the macroscopic elastic plastic continuum. Micro polycrystal structure can be modeled as a three dimensional representative volume element (RVE). RVE is featured as by 3×3×3 eight-nodes solid finite elements, which has 216 crystal orientations. This FE analysis code can predict the deformation, strain and stress evolutions in the wire drawing processes in the macro- scales, and further the crystal texture and hardening evolutions in the micro-scale. In this study, we analyzed the texture evolution in the wire drawing processes by our two-scale FE analysis code under conditions of various drawing angles of dice. We evaluates the texture evolution in the surface and center regions of the wire cross section, and to clarify the effects of processing conditions on the texture evolution.

  20. The anatomy and histology of caudal autotomy and regeneration in lizards.

    PubMed

    Gilbert, Emily A B; Payne, Samantha L; Vickaryous, Matthew K

    2013-01-01

    Abstract Caudal autotomy-the ability to self-detach the tail-is a dramatic adaptation common to many structural-grade lizards. For most species, tail loss is followed by the equally dramatic phenomenon of tail regeneration. Here we review the anatomy and histology of caudal autotomy and regeneration in lizards, drawing heavily from research published over the past 2 decades. The autotomous tail is characterized by various structural adaptations, which act to minimize blood loss and trauma to adjacent tissues. The early phase of wound healing involves a leukocytic response but limited inflammation. Reepithelialization via a specialized wound epithelium is not only critical for scar-free healing but also necessary for subsequent tissue patterning and regenerative outgrowth. Regeneration begins with the formation of the blastema, a mass of proliferating mesenchymal-like cells. As the blastema expands, it is invaded by blood vessels and the spinal cord. Whereas the replacement tail outwardly resembles the original appendage, it differs in several notable respects, including the tissue composition and organization of the skeleton, muscular system, and spinal cord. Increasingly, the lizard tail is being recognized among biomedical scientists as an important model for the study of wound healing and multitissue restoration.

  1. 9. Credit JPL. Photographic copy of drawing, engineering drawing showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Credit JPL. Photographic copy of drawing, engineering drawing showing structure of Test Stand 'A' (Building 4202/E-3) and its relationship to the Monitor Building or blockhouse (Building 4203/E-4) when a reinforced concrete machinery room was added to the west side of Test Stand 'A' in 1955. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Electrical Layout - Muroc, Test Stand & Refrigeration Equipment Room,' drawing no. E3/7-0, April 6, 1955. - Jet Propulsion Laboratory Edwards Facility, Test Stand A, Edwards Air Force Base, Boron, Kern County, CA

  2. New insight in spiral drawing analysis methods - Application to action tremor quantification.

    PubMed

    Legrand, André Pierre; Rivals, Isabelle; Richard, Aliénor; Apartis, Emmanuelle; Roze, Emmanuel; Vidailhet, Marie; Meunier, Sabine; Hainque, Elodie

    2017-10-01

    Spiral drawing is one of the standard tests used to assess tremor severity for the clinical evaluation of medical treatments. Tremor severity is estimated through visual rating of the drawings by movement disorders experts. Different approaches based on the mathematical signal analysis of the recorded spiral drawings were proposed to replace this rater dependent estimate. The objective of the present study is to propose new numerical methods and to evaluate them in terms of agreement with visual rating and reproducibility. Series of spiral drawings of patients with essential tremor were visually rated by a board of experts. In addition to the usual velocity analysis, three new numerical methods were tested and compared, namely static and dynamic unraveling, and empirical mode decomposition. The reproducibility of both visual and numerical ratings was estimated, and their agreement was evaluated. The statistical analysis demonstrated excellent agreement between visual and numerical ratings, and more reproducible results with numerical methods than with visual ratings. The velocity method and the new numerical methods are in good agreement. Among the latter, static and dynamic unravelling both display a smaller dispersion and are easier for automatic analysis. The reliable scores obtained through the proposed numerical methods allow considering that their implementation on a digitized tablet, be it connected with a computer or independent, provides an efficient automatic tool for tremor severity assessment. Copyright © 2017 International Federation of Clinical Neurophysiology. Published by Elsevier B.V. All rights reserved.

  3. Re-framing the representation of women in advertisements for hormone replacement therapy.

    PubMed

    Whittaker, R

    1998-06-01

    This article examines and presents examples of contemporary advertising within the medical and health professions that continue the process and organisation of knowledge about women and their reproductive bodies. It draws on feminist and poststructural perspectives to inform a critical evaluation of the visual representations of menopausal women and hormone replacement therapy. These representations work to construct certain definitions of the feminine that sustain and support existing contradictory cultural meanings and values about menopause. I argue that the images continue to misrepresent and define what forms of femininity and sexual gender are desirable and acceptable for menopausal women. The article addresses the problems of gender discrimination and bias within the advertising industry, and illustrates the ways in which readers of visual texts may be influenced by stereotypic assumptions concerning a woman's lived experience of menopause. It illustrates how specific symbolic images directed towards men and women for hormone replacement therapy, testosterone deficiency and sexual dysfunction influence the viewer's decision making and action responses.

  4. What Pacemakers Can Teach Us about the Ethics of Maintaining Artificial Organs.

    PubMed

    Hutchison, Katrina; Sparrow, Robert

    2016-11-01

    One day soon it may be possible to replace a failing heart, liver, or kidney with a long-lasting mechanical replacement or perhaps even with a 3-D printed version based on the patient's own tissue. Such artificial organs could make transplant waiting lists and immunosuppression a thing of the past. Supposing that this happens, what will the ongoing care of people with these implants involve? In particular, how will the need to maintain the functioning of artificial organs over an extended period affect patients and their doctors and the responsibilities of those who manufacture such devices? Drawing on lessons from the history of the cardiac pacemaker, this article offers an initial survey of the ethical issues posed by the need to maintain and service artificial organs. We briefly outline the nature and history of cardiac pacemakers, with a particular focus on the need for technical support, maintenance, and replacement of these devices. Drawing on the existing medical literature and on our conversations and correspondence with cardiologists, regulators, and manufacturers, we describe five sources of ethical issues associated with pacemaker maintenance: the location of the devices inside the human body, such that maintenance generates surgical risks; the complexity of the devices, which increases the risk of harms to patients as well as introducing potential injustices in access to treatment; the role of software-particularly software that can be remotely accessed-in the functioning of the devices, which generates privacy and security issues; the impact of continual development and improvement of the device; and the influence of commercial interests in the context of a medical device market in which there are several competing products. Finally, we offer some initial suggestions as to how these questions should be answered. © 2016 The Hastings Center.

  5. 10. Photographic copy of photocopy of bridge drawing, half plans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Photographic copy of photocopy of bridge drawing, half plans and elevation (June 12, 1937, original drawing on file in Structures Section, Utah Department of Transportation, Salt Lake City, Utah). SHEET NO. 2 OF 6 SHEETS. - Gould Wash Bridge, Spanning Gould Wash at State Route 9, Hurricane, Washington County, UT

  6. 11. Photographic copy of photocopy of bridge drawing, half plans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Photographic copy of photocopy of bridge drawing, half plans and footings (June 12, 1937, original drawing on file in Structures Section, Utah Department of Transportation, Salt Lake City, Utah). SHEET NO. 3 OF 6 SHEETS. - Gould Wash Bridge, Spanning Gould Wash at State Route 9, Hurricane, Washington County, UT

  7. Identifying and Assessing Self-Images in Drawings by Delinquent Adolescents (in 2 Parts).

    ERIC Educational Resources Information Center

    Silver, Rawley; Ellison, JoAnne

    1995-01-01

    Examines assumption that art therapists can objectively identify self-images in drawings by troubled adolescents without talking to these youth. Findings suggest that discussion, though preferable, is not required for identifying self-images. Analysis of adolescents' drawings indicates that structured art assessment can be useful in evaluating…

  8. 12. Photographic copy of photocopy of bridge drawing, half plans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Photographic copy of photocopy of bridge drawing, half plans and abutment elevation (June 12, 1937, original drawing on file in Structures Section, Utah Department of Transportation, Salt Lake City, Utah). SHEET NO. 4 OF 6 SHEETS. - Gould Wash Bridge, Spanning Gould Wash at State Route 9, Hurricane, Washington County, UT

  9. 9. Photographic copy of photocopy of bridge drawing, situation plan ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Photographic copy of photocopy of bridge drawing, situation plan and profile on center line (June 12, 1937, original drawing on file in Structures Section, Utah Department of Transportation, Salt Lake City, Utah). SHEET NO. 1 OF 6 SHEETS. - Gould Wash Bridge, Spanning Gould Wash at State Route 9, Hurricane, Washington County, UT

  10. Ares Upper Stage Processes to Implement Model Based Design - Going Paperless

    NASA Technical Reports Server (NTRS)

    Gregory, Melanie

    2012-01-01

    Computer-Aided Design (CAD) has all but replaced the drafting board for design work. Increased productivity and accuracy should be natural outcomes of using CAD. Going from paper drawings only to paper drawings based on CAD models to CAD models and no drawings, or Model Based Design (MBD), is a natural progression in today?s world. There are many advantages to MBD over traditional design methods. To make the most of those advantages, standards should be in place and the proper foundation should be laid prior to transitioning to MBD. However, without a full understanding of the implications of MBD and the proper control of the data, the advantages are greatly diminished. Transitioning from a paper design world to an electronic design world means re-thinking how information gets controlled at its origin and distributed from one point to another. It means design methodology is critical, especially for large projects. It means preparation of standardized parts and processes as well as strong communication between all parties in order to maximize the benefits of MBD.

  11. Integrated support structure

    NASA Technical Reports Server (NTRS)

    Bruneau, Stephen D.; Campbell, John T.; Struven, Christopher A.

    1990-01-01

    This Major Qualifying Project is part of the Advanced Space Design Program at WPI. The goal is to design a support structure for a NASA GetAway Special experimental canister. The payload integration, weight, volume, and structural integrity of the canister as specified by NASA guidelines were studied. The end result is a complete set of design drawings with interface drawings and data to specify the design and leave a base on which the next group can concentrate.

  12. Computer Program Re-layers Engineering Drawings

    NASA Technical Reports Server (NTRS)

    Crosby, Dewey C., III

    1990-01-01

    RULCHK computer program aids in structuring layers of information pertaining to part or assembly designed with software described in article "Software for Drawing Design Details Concurrently" (MFS-28444). Checks and optionally updates structure of layers for part. Enables designer to construct model and annotate its documentation without burden of manually layering part to conform to standards at design time.

  13. Drawing-induced changes in morphology and mechanical properties of hornet silk gel films.

    PubMed

    Kameda, Tsunenori; Kojima, Katsura; Togawa, Eiji; Sezutsu, Hideki; Zhang, Qiang; Teramoto, Hidetoshi; Tamada, Yasushi

    2010-04-12

    Complete amino acid sequences of the four major proteins (Vssilk 1-4) of silk (hornet silk) obtained from yellow hornet ( Vespa simillima , Vespinae, Vespidae) cocoons have been determined. The native structure of the hornet silk (HS), in which Vssilk 1-4 have an alpha-helix domain with coiled-coil alpha-helices and a beta-sheet domain, is restored when hornet silk gel films (HSGFs) are formed by pressing and drying HS hydrogel. Necking occurs when dry HSGFs are drawn; however, wet HSGFs can be uniaxially drawn with a draw ratio (DR) of 2. Drawing helps obtain high-performance films with a maximum tensile strength and tensile modulus of 170 MPa and 5.5 GPa, respectively. Drawing-induced changes in the orientation and conformation of the coiled-coil structure are investigated.

  14. 6. Photographic copy of original construction drawing, no date, from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Photographic copy of original construction drawing, no date, from files in the Office of the Chief Engineer, U.S. Fish and Wildlife Service Regional Office, Denver. GATE CONTROL STRUCTURE (generic drawing used for all five dams in refuge) - J. Clark Salyer National Wildlife Refuge Dams, Along Lower Souris River, Kramer, Bottineau County, ND

  15. Social Interactions and Familial Relationships Preservice Science Teachers Describe during Interviews about Their Drawings of the Endocrine and Gastrointestinal Systems

    ERIC Educational Resources Information Center

    Patrick, Patricia

    2014-01-01

    This study examined preservice science teachers' understandings of the structure and function of the human gastrointestinal and endocrine systems through drawings and interviews. Moreover, the preservice science teachers described where they thought they learned about the systems. The 142 preservice teachers were asked to draw the human…

  16. 7. This photographic copy of an engineering drawing displays the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. This photographic copy of an engineering drawing displays the building's floor plan in its 1995 arrangement, with rooms designated. California Institute of Technology, Jet Propulsion Laboratory, Facilities Engineering and Construction Office, "Addition to Weigh & Control Bldg. E-35, Demolition, Floor and Roof Plans," drawing no. E35/3-0, October 5, 1983. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California. - Jet Propulsion Laboratory Edwards Facility, Weigh & Control Building, Edwards Air Force Base, Boron, Kern County, CA

  17. 4. This photographic copy of an engineering drawing shows the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. This photographic copy of an engineering drawing shows the plan and details for Test Stand "G" and the placement of the vibrator. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: "Vibration Test Facility-Bldg E-72, Floor & Roof Plans, Sections, Details & Door Schedule," drawing no. E72/2-5, 21 May 1964. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California. - Jet Propulsion Laboratory Edwards Facility, Test Stand G, Edwards Air Force Base, Boron, Kern County, CA

  18. The Scope of Usage-Based Theory

    PubMed Central

    Ibbotson, Paul

    2013-01-01

    Usage-based approaches typically draw on a relatively small set of cognitive processes, such as categorization, analogy, and chunking to explain language structure and function. The goal of this paper is to first review the extent to which the “cognitive commitment” of usage-based theory has had success in explaining empirical findings across domains, including language acquisition, processing, and typology. We then look at the overall strengths and weaknesses of usage-based theory and highlight where there are significant debates. Finally, we draw special attention to a set of culturally generated structural patterns that seem to lie beyond the explanation of core usage-based cognitive processes. In this context we draw a distinction between cognition permitting language structure vs. cognition entailing language structure. As well as addressing the need for greater clarity on the mechanisms of generalizations and the fundamental units of grammar, we suggest that integrating culturally generated structures within existing cognitive models of use will generate tighter predictions about how language works. PMID:23658552

  19. Living and Coping with Ongoing Violence: A Cross-National Analysis of Children's Drawings Using Structured Rating Indices.

    ERIC Educational Resources Information Center

    Rudenberg, Stephanie Linda; Jansen, Patricia; Fridjohn, Peter

    2001-01-01

    Investigated the effectiveness of analyzing drawings of 8- to 12-year-old children as a method of understanding the effects of living and coping with ongoing civic unrest. Compared drawings by white and black South African children with those of children from Belfast, Ireland. Found cross-national differences in stress, emotion, adjustment, and…

  20. Exploring Perceptions and Attitudes towards Teaching and Learning Manual Technical Drawing in a Digital Age

    ERIC Educational Resources Information Center

    McLaren, Susan Valerie

    2008-01-01

    This paper examines the place of manual technical drawing in the 21st century by discussing the perceived value and relevance of teaching school students how to draw using traditional instruments, in a world of computer aided drafting (CAD). Views were obtained through an e-survey, questionnaires and structured interviews. The sample groups…

  1. US EVA 16 EMU Prep

    NASA Image and Video Library

    2010-08-11

    ISS024-E-011673 (11 Aug. 2010) --- NASA astronaut Tracy Caldwell Dyson, Expedition 24 flight engineer, attired in her Extravehicular Mobility Unit (EMU) spacesuit, is pictured in the Quest airlock of the International Space Station as the second of three planned spacewalks to remove and replace an ammonia pump module that failed July 31 draws to a close. NASA astronaut Shannon Walker and Russian cosmonaut Fyodor Yurchikhin, both flight engineers, assist Caldwell Dyson with the doffing of her spacesuit.

  2. Making Policy in the Shadow of the Future

    DTIC Science & Technology

    2010-01-01

    dollar would be replaced as the inter- national currency by the euro; the International Monetary Fund’s synthetic blend of curren- cies, known as SDRs...Special Drawing Rights); or even the Chinese renminbi. Indeed, in June 2009, the Chinese Central Bank called for the creation of a new reserve currency ...2006.32 Nor do short-term rates reflect panic on the part of debt holders. The U.S. dollar remains the international reserve currency . The reasons

  3. Application of the AMPLE cluster-and-truncate approach to NMR structures for molecular replacement

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bibby, Jaclyn; Keegan, Ronan M.; Mayans, Olga

    2013-11-01

    Processing of NMR structures for molecular replacement by AMPLE works well. AMPLE is a program developed for clustering and truncating ab initio protein structure predictions into search models for molecular replacement. Here, it is shown that its core cluster-and-truncate methods also work well for processing NMR ensembles into search models. Rosetta remodelling helps to extend success to NMR structures bearing low sequence identity or high structural divergence from the target protein. Potential future routes to improved performance are considered and practical, general guidelines on using AMPLE are provided.

  4. Combustion of Hazard Division 1.3 M1 Gun Propellant in a Reinforced Concrete Structure

    DTIC Science & Technology

    2015-08-01

    pretest setup and post - test remains. An overall picture of ground zero and the surrounding location was taken for each test . Photographs were taken...how the door was tied in was made based on post - test pictures following rupture of the structure from Tests 2 and 4. The pressure-time histories from...analysis. The Kasun structure was modeled according to the drawings; deviation from drawing design on how the door was tied in was made based on post

  5. Characteristics of the tree-drawing test in chronic schizophrenia.

    PubMed

    Kaneda, Ayako; Yasui-Furukori, Norio; Saito, Manabu; Sugawara, Norio; Nakagami, Taku; Furukori, Hanako; Kaneko, Sunao

    2010-04-01

    A tree-drawing test acts as both a projective psychological examination as well as a supplementary psychodiagnostic tool. There is little information relating the characteristics of schizophrenia and the tree-drawing test. The present study compared the structural and morphological differences in the results of the tree-drawing test between schizophrenic patients and healthy individuals, as well as between schizophrenic patients who responded well to treatment and those who responded poorly. The subjects included 202 chronic schizophrenic patients and 113 healthy individuals. The schizophrenic patients were categorized as 'good responders' or 'poor responders' based on their response to medical treatments. The tree-drawing test was performed on all subjects. The tree drawn by each subject was analyzed structurally and morphologically. There were significant differences between the trunk and branches drawn by schizophrenic patients and those drawn by healthy controls. There were no significant differences between the good responders and the poor responders in any aspect of the tree drawings. Multiple regression models showed that the ratio of the tree area to the total area of the drawing paper, the width of the trunk, the trunk base opening, and the size of the branch ends were significantly associated with schizophrenia. The present study suggests that the trees drawn by schizophrenic patients are significantly different from those drawn by healthy individuals, but among schizophrenic patients, it is difficult to distinguish between good responders and poor responders using the tree-drawing test.

  6. This photocopy of an engineering drawing shows the BakerPerkins 150gallon ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    This photocopy of an engineering drawing shows the Baker-Perkins 150-gallon mixer installation in the building. Austin, Field & Fry, Architects Engineers, 22311 West Third Street, Los Angeles 57, California: Edwards Test Station Complex, Jet Propulsion Laboratory, California Institute of Technology, Edwards Air Force Base, Edwards, California: "150 Gallon Mixer System Bldg. E-34, Plans, Sections & Details," drawing no. E34/6-0, 10 July 1963. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California - Jet Propulsion Laboratory Edwards Facility, Mixer, Edwards Air Force Base, Boron, Kern County, CA

  7. This photographic copy of an engineering drawing shows floor plans, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    This photographic copy of an engineering drawing shows floor plans, sections and elevations of Building E-86, with details typical of the steel frame and "Transite" building construction at JPL Edwards Facility. California Institute of Technology, Jet Propulsion Laboratory, Facilities Engineering and Construction Office: "Casting & Curing, Building E-86, Floor Plan, Elevations & Section," drawing no. E86/6, 25 February 1977. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California - Jet Propulsion Laboratory Edwards Facility, Casting & Curing Building, Edwards Air Force Base, Boron, Kern County, CA

  8. Determining Biology Student Teachers' Cognitive Structure on the Concept of "Diffusion" through the Free Word-Association Test and the Drawing-Writing Technique

    ERIC Educational Resources Information Center

    Kurt, Hakan; Ekici, Gülay; Aktas, Murat; Aksu, Özlem

    2013-01-01

    The aim of the current study is to investigate student biology teachers' cognitive structures related to "diffusion" through the free word-association test and the drawing-writing technique. As the research design of the study, the qualitative research method was applied. The data were collected from 44 student biology teachers. The free…

  9. [Post-anesthetic autologous blood donation used in knee and hip arthroplasty].

    PubMed

    Wei, Wei; Kou, Bolong; Ju, Rongseng

    2006-06-01

    To explore the clinical application of the postanesthetic autologous donation and the postoperative transfusion during the knee and hip replacement surgeries. Thirty-three patients (17 males, 16 females) admitted for the elective joint replacement surgeries from September 2004 to January 2005 were included in this study. Of the 33 patients, 5 were diagnosed with rheumatoid arthritis, 23 with femoral head necrosis, and 5 with knee osteoarthritis. Immediately after anesthesia, 400 ml of the blood was drawn and transfused after the surgery. The blood pressure was monitored during the blood drawing, postoperative blood parameters were recorded, surgical site drainage and signs of infections were observed, and the other clinical data were collected. Of the 33 patients, 27 only received autologous transfusion, including 21 patients who underwent the unilateral hip replacement and 6 patients who underwent the unilateral knee replacement. All these 6 patients with the unilateral knee replacement received the blood drained from the surgical sites in addition to the blood obtained from the post-anesthetic autologous donation. Another 6 cases with the bilateral hip and knee replacement received the blood drained from the surgical sites, the blood obtained from the post-anesthetic autologous donation and 400 ml of the allogeneic blood transfusion. The blood received postoperatively averaged 650 ml (range, 200-1 150 ml), haemoglobin (Hb) was averaged 88 g/L (68-102 g/L), and Hct was averaged 24.6% (20.5%-31.5%). Hb and Hct were lower after operation than before operation (P < 0.01). Postoperative blood transfusion following the postanesthetic and preoperative autologous donation can be successfully applied to most of the patients undergoing the knee or hip replacement so as to reduce complications of the allogeneic blood transfusion.

  10. Photographic copy of drawing by Modjeski and Masters, Engineers of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of drawing by Modjeski and Masters, Engineers of the proposed Huey P. Long Bridge Widening. Original drawing located in the office of Modjeski and Masters, Consulting Engineers at 1055 St. Charles Avenue, New Orleans, LA. 70130. MAY 13, 2005 DRAWING OF THE PROPOSED HUEY P. LONG BRIDGE WIDENING, U.S. 90, MAIN BRIDGE SUBSTRUCTURE, SHOWING STRUCTURE PLAN AND ELEVATION -1. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

  11. Photographic copy of drawing by Modjeski and Masters, Engineers of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of drawing by Modjeski and Masters, Engineers of the proposed Huey P. Long Bridge Widening. Original drawing located in the office of Modjeski and Masters, Consulting Engineers at 1055 St. Charles Avenue, New Orleans, LA. 70130. MAY 13, 2005 DRAWING OF THE PROPOSED HUEY P. LONG BRIDGE WIDENING, U.S. 90, MAIN BRIDGE SUBSTRUCTURE, SHOWING STRUCTURE PLAN AND ELEVATION -2 AND TYPICAL SECTION THROUGH BRIDGE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

  12. Drawings by Child Victims of Incest.

    ERIC Educational Resources Information Center

    Yates, Alayne; And Others

    1985-01-01

    Child victims of incest were judged to have more poorly developed impulse controls, a defensive structure which emphasizes repression, and were significantly more variable in the degree to which they expressed sexual features in the drawings. (Author/CL)

  13. The effect of mechanical drawing on optical and structural properties of nylon 6 fibres

    NASA Astrophysics Data System (ADS)

    El-Bakary, M. A.

    2007-09-01

    The Pluta polarizing double-refracting interference microscope was attached to a mechanical drawing device to study the effect of cold drawing on the optical and structural properties of nylon 6 fibres. The microscope was used in its two positions for determining the refractive indices and birefringence of fibres. Different applied stresses and strain rates were obtained using the mechanical-drawing device. The effect of the applied stresses on the optical and physical parameters was investigated. The resulting optical parameters were utilized to investigate the polarizability per unit volume, the optical orientation factor, the orientation angle and the average work per chain. The refractive index and birefringence profiles were measured. Relationships between the average work per chain and optical parameters at different strains rates were determined. An empirical formula was deduced for these fibres. Micro-interferograms are given for illustration.

  14. Effect of Temperature and Deformation Rate on the Tensile Mechanical Properties of Polyimide Films

    NASA Technical Reports Server (NTRS)

    Moghazy, Samir F.; McNair, Kevin C.

    1996-01-01

    In order to study the structure-property relationships of different processed oriented polyimide films, the mechanical properties will be identified by using tensile tester Instron 4505 and structural information such as the 3-dimensional birefringence molecular symmetry axis and 3-dimensional refractive indices will be determined by using wave guide coupling techniques. The monoaxial drawing techniques utilized in this research are very useful for improving the tensile mechanical properties of aromatic polyimide films. In order to obtain high modulus/high strength polyimide films the following two techniques have been employed, cold drawing in which polyimide films are drawn at room temperature at different cross head speeds and hot drawing in which polyimide films are drawn at different temperatures and cross head speeds. In the hot drawing process the polyimide films are drawn at different temperatures until the glass transition temperature (Tg) is reached by using the environmental chamber. All of the mechanical and optical property parameters will be identified for each sample processed by both cold and hot drawing techniques.

  15. Thermally Drawn Fibers as Nerve Guidance Scaffolds

    PubMed Central

    Koppes, Ryan A.; Park, Seongjun; Hood, Tiffany; Jia, Xiaoting; Poorheravi, Negin Abdolrahim; Achyuta, Anilkumar Harapanahalli; Fink, Yoel; Anikeeva, Polina

    2016-01-01

    Synthetic neural scaffolds hold promise to eventually replace nerve autografts for tissue repair following peripheral nerve injury. Despite substantial evidence for the influence of scaffold geometry and dimensions on the rate of axonal growth, systematic evaluation of these parameters remains a challenge due to limitations in materials processing. We have employed fiber drawing to engineer a wide spectrum of polymer-based neural scaffolds with varied geometries and core sizes. Using isolated whole dorsal root ganglia as an in vitro model system we have identified key features enhancing nerve growth within these fiber scaffolds. Our approach enabled straightforward integration of microscopic topography at the scale of nerve fascicles within the scaffold cores, which led to accelerated Schwann cell migration, as well as neurite growth and alignment. Our findings indicate that fiber drawing provides a scalable and versatile strategy for producing nerve guidance channels capable of controlling direction and accelerating the rate of axonal growth. PMID:26717246

  16. Bioresearch Module Design Definition and Space Shuttle Vehicle Integration Study. Volume 1: Basic Report

    NASA Technical Reports Server (NTRS)

    Lang, A. L., Jr.

    1971-01-01

    Preliminary designs of the Bioexplorer spacecraft, developed in an earlier study program, are analyzed and updated to conform to a new specification which includes use of both the Scout and the space shuttle vehicle for launch. The updated spacecraft is referred to as bioresearch module. It is capable of supporting a variety of small biological experiments in near-earth and highly elliptical earth orbits. The baseline spacecraft design is compatible with the Scout launch vehicle. Inboard profile drawings, weight statements, interface drawings, and spacecraft parts and aerospace ground equipment lists are provided to document the design. The baseline design was analyzed to determine the design and cost impact of a set of optional features. These include reduced experiment power and thermal load, addition of an experiment television monitor, and replacement of VHF with S-band communications. The impact of these options on power required, weight change and cost is defined.

  17. Parental artistic drawings of the fetus before and after 3-/4-dimensional ultrasonography.

    PubMed

    Pretorius, Dolores H; Hearon, Heather A; Hollenbach, Kathryn A; Ji, Eun-Kyung; Gattu, Shilpa; Nelson, Novella M; Nelson, Tanya M; Chibuk, Jason; Hull, Andrew D; Newton, Ruth P; Nelson, Thomas R

    2007-03-01

    The purpose of this study was to assess the impact of 3-/4-dimensional ultrasonography (3D/4DUS) on parental impressions of their fetus using preexamination and postexamination parental drawings. One hundred one parents (32 male and 69 female) were asked to draw pictures of their fetus immediately before and after undergoing 3D/4DUS. A drawing assessment instrument was used to evaluate the fetal anatomy by 4 reviewers. Overall descriptive quality and a comparison of before and after images were assessed. Reviewers judged the drawings as significantly different in 23% to 56% of cases, slightly different in 41% to 64%, and having no significant difference in 2% to 22%; some difference was identified in at least 78%. Reviewers familiar with ultrasonography were able to correctly predict which picture was drawn first in 78%. Differences identified were related to extremity positioning, personalized uterine environment, and artistic nature. No significant difference in the overall total scoring for anatomic differentiation before and after 3D/4DUS was found. A trend in drawing less anatomic structures after 3D/4DUS was discovered. Significantly fewer people drew hair after 3D/4DUS (P<.01) even when they had drawn hair before the 3D/4DUS. Similar significant differences were seen for the lower extremities (P<.01), with less detail being presented after the 3D/4DUS. Differences were seen between drawings made before and after 3D/4DUS by parents. Drawings after 3D/4DUS emphasized structures seen during the 3D/4DUS examination and were more reality based, whereas drawings before 3D/4DUS were more iconographic and based on preconceived anatomic knowledge.

  18. Cost-effectiveness of aortic valve replacement in the elderly: an introductory study.

    PubMed

    Wu, YingXing; Jin, Ruyun; Gao, Guangqiang; Grunkemeier, Gary L; Starr, Albert

    2007-03-01

    With increased life expectancy and improved technology, valve replacement is being offered to increasing numbers of elderly patients with satisfactory clinical results. By using standard econometric techniques, we estimated the relative cost-effectiveness of aortic valve replacement by drawing on a large prospective database at our institution. By using aortic valve replacement as an example, this introductory report paves the way to more definitive studies of these issues in the future. From 1961 to 2003, 4617 adult patients underwent aortic valve replacement at our service. These patients were provided with a prospective lifetime follow-up. As of 2005, these patients had accumulated 31,671 patient-years of follow-up (maximum 41 years) and had returned 22,396 yearly questionnaires. A statistical model was used to estimate the future life years of patients who are currently alive. In the absence of direct estimates of utility, quality-adjusted life years were estimated from New York Heart Association class. The cost-effectiveness ratio was calculated by the patient's age at surgery. The overall cost-effectiveness ratio was approximately 13,528 dollars per quality-adjusted life year gained. The cost-effectiveness ratio increased according to age at surgery, up to 19,826 dollars per quality-adjusted life year for octogenarians and 27,182 dollars per quality-adjusted life year for nonagenarians. Given the limited scope of this introductory study, aortic valve replacement is cost-effective for all age groups and is very cost-effective for all but the most elderly according to standard econometric rules of thumb.

  19. Sunspot drawings handwritten character recognition method based on deep learning

    NASA Astrophysics Data System (ADS)

    Zheng, Sheng; Zeng, Xiangyun; Lin, Ganghua; Zhao, Cui; Feng, Yongli; Tao, Jinping; Zhu, Daoyuan; Xiong, Li

    2016-05-01

    High accuracy scanned sunspot drawings handwritten characters recognition is an issue of critical importance to analyze sunspots movement and store them in the database. This paper presents a robust deep learning method for scanned sunspot drawings handwritten characters recognition. The convolution neural network (CNN) is one algorithm of deep learning which is truly successful in training of multi-layer network structure. CNN is used to train recognition model of handwritten character images which are extracted from the original sunspot drawings. We demonstrate the advantages of the proposed method on sunspot drawings provided by Chinese Academy Yunnan Observatory and obtain the daily full-disc sunspot numbers and sunspot areas from the sunspot drawings. The experimental results show that the proposed method achieves a high recognition accurate rate.

  20. MX Siting Investigation. Mineral Resources Survey, Seven Additional Valleys, Nevada/Utah Siting Area. Volume I.

    DTIC Science & Technology

    1981-06-23

    Some negative impacts of MX deployment on mining in the study area are unavoidable, but careful planning in water use and actual shelter site...depend upon the extent of deployment and location of shelter sites. A major impact on the mining industry will result if draw-down of the water table...use and acquire the necessary land rights or whether the affected shelter (s) should be abandoned or replaced elsewhere in the deployment area. Egec E-TR

  1. Interfacing Computer-Assisted Drafting and Design with the Building Loads Analysis and System Thermodynamics (BLAST) Program

    DTIC Science & Technology

    1992-10-01

    Manual CI APPENDIX D: Drawing Navigator Field Test D1 DISTRIBUTION Accesion For NTIS CRA&I OTIC TAB Unannouncea JustiteCdtOn By Distribution I "".i•I...methods replace manual methods, the automation will handle the data for the designer, thus reducing error and increasing throughput. However, the two...actively move data from one automation tool (CADD) to the other (the analysis program). This intervention involves a manual rekeying of data already in

  2. The cost of cardiac surgery.

    PubMed Central

    Monro, J L; Mollo, S; Brookbanks, S; Conway, N; Ross, J K

    1978-01-01

    A study in Wessex has shown that at 1977 prices, and excluding the cost of equipment already installed in the unit, the cost of replacing a man's aortic valve in this unit is about 1800 pounds. Nevertheless, this seems a small price to pay for return to health and full working capacity, particularly since such patients no longer need to draw social security benefits and their tax contributions will return to normal, thus probably paying for the operation within two years. PMID:418846

  3. British media attacks on homeopathy: are they justified?

    PubMed

    Vithoulkas, George

    2008-04-01

    Homeopathy is being attacked by the British media. These attacks draw support from irresponsible and unjustified claims by certain teachers of homeopathy. Such claims include the use of 'dream' and 'imaginative' methods for provings. For prescribing some such teachers attempt to replace the laborious process of matching symptom picture and remedy with spurious theories based on 'signatures', sensations and other methods. Other irresponsible claims have also been made. These "new ideas" risk destroying the principles, theory, and practice of homeopathy.

  4. 14. Photocopy of engineering drawing. PROJECT WS315A: INSTRUMENTATION TRENCH DETAILSSTRUCTURAL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Photocopy of engineering drawing. PROJECT WS-315A: INSTRUMENTATION TRENCH DETAILS-STRUCTURAL, 17, APRIL 1956. - Cape Canaveral Air Station, Launch Complex 17, Facility 28401, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  5. Depicting 3D shape using lines

    NASA Astrophysics Data System (ADS)

    DeCarlo, Doug

    2012-03-01

    Over the last few years, researchers in computer graphics have developed sophisticated mathematical descriptions of lines on 3D shapes that can be rendered convincingly as strokes in drawings. These innovations highlight fundamental questions about how human perception takes strokes in drawings as evidence of 3D structure. Answering these questions will lead to a greater scientific understanding of the flexibility and richness of human perception, as well as to practical techniques for synthesizing clearer and more compelling drawings. This paper reviews what is known about the mathematics and perception of computer-generated line drawings of shape and motivates an ongoing program of research to better characterize the shapes people see when they look at such drawings.

  6. Ab initio solution of macromolecular crystal structures without direct methods.

    PubMed

    McCoy, Airlie J; Oeffner, Robert D; Wrobel, Antoni G; Ojala, Juha R M; Tryggvason, Karl; Lohkamp, Bernhard; Read, Randy J

    2017-04-04

    The majority of macromolecular crystal structures are determined using the method of molecular replacement, in which known related structures are rotated and translated to provide an initial atomic model for the new structure. A theoretical understanding of the signal-to-noise ratio in likelihood-based molecular replacement searches has been developed to account for the influence of model quality and completeness, as well as the resolution of the diffraction data. Here we show that, contrary to current belief, molecular replacement need not be restricted to the use of models comprising a substantial fraction of the unknown structure. Instead, likelihood-based methods allow a continuum of applications depending predictably on the quality of the model and the resolution of the data. Unexpectedly, our understanding of the signal-to-noise ratio in molecular replacement leads to the finding that, with data to sufficiently high resolution, fragments as small as single atoms of elements usually found in proteins can yield ab initio solutions of macromolecular structures, including some that elude traditional direct methods.

  7. 42. Photocopy of drawing no. C3599, dated 10 December 1915, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. Photocopy of drawing no. C-3599, dated 10 December 1915, entitled "New York Municipal Railway Corporation, Coney Island Terminal Contract Drawing. Steel Plan of Stillwell Avenue Station, " showing structural framing plan using new and used iron and steel column griders. Original on file, plan archives of MTA New York City Transit, New York. - Stillwell Avenue Station, Intersection of Stillwell & Surf Avenues, Brooklyn, Kings County, NY

  8. More Airfields Equals More Opportunities

    DTIC Science & Technology

    2012-03-01

    NEPA National Environmental Policy Act xiv PRV Plant Replacement Value RAF Royal Air Force SAC Strategic Air Command SACEUR Supreme...follows the path of prior investment when dealing with airfields. According to the 2010 Base Structure Report, Ramstein’s Plant Replacement Value...Garrisons, 35. 85 Office of the Deputy Under Secretary of Defense (Installations & Environment), 2010 Base Structure Report, DOD-3. Plant Replacement

  9. 26. Photocopy of engineering drawing. PROJECT WS315A: FLUME AND RETENTION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. Photocopy of engineering drawing. PROJECT WS-315A: FLUME AND RETENTION PONDS-STRUCTURAL AND MECHANICAL, APRIL 1956. - Cape Canaveral Air Station, Launch Complex 17, Facility 28501, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  10. 27. Photocopy of engineering drawing. PROJECT WS315A: DISPOSAL PONDS AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. Photocopy of engineering drawing. PROJECT WS-315A: DISPOSAL PONDS AND DRAINAGE-STRUCTURAL AND MECHANICAL, 1969. - Cape Canaveral Air Station, Launch Complex 17, Facility 28501, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  11. Plane Jane(s).

    ERIC Educational Resources Information Center

    Greenman, Geri

    2001-01-01

    Describes an assignment that was used in an advanced drawing class in which the students created self-portraits, breaking up their images using planes and angles to suggest their bone structure. Explains that the students also had to include three realistic portions in their drawings. (CMK)

  12. 5. Photocopy of engineering drawing. LC17 HIGH PRESSURE GAS INSTALLATION: ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photocopy of engineering drawing. LC-17 HIGH PRESSURE GAS INSTALLATION: PLANS AND DETAILS (CHANGE HOUSE)-STRUCTURAL, APRIL 1969. - Cape Canaveral Air Station, Launch Complex 17, Facility 28409, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  13. Clustered atom-replaced structure in single-crystal-like metal oxide

    NASA Astrophysics Data System (ADS)

    Araki, Takeshi; Hayashi, Mariko; Ishii, Hirotaka; Yokoe, Daisaku; Yoshida, Ryuji; Kato, Takeharu; Nishijima, Gen; Matsumoto, Akiyoshi

    2018-06-01

    By means of metal organic deposition using trifluoroacetates (TFA-MOD), we replaced and localized two or more atoms in a single-crystalline structure having almost perfect orientation. Thus, we created a new functional structure, namely, clustered atom-replaced structure (CARS), having single-crystal-like metal oxide. We replaced metals in the oxide with Sm and Lu and localized them. Energy dispersive x-ray spectroscopy results, where the Sm signal increases with the Lu signal in the single-crystalline structure, confirm evidence of CARS. We also form other CARS with three additional metals, including Pr. The valence number of Pr might change from 3+ to approximately 4+, thereby reducing the Pr–Ba distance. We directly observed the structure by a high-angle annular dark-field image, which provided further evidence of CARS. The key to establishing CARS is an equilibrium chemical reaction and a combination of additional larger and smaller unit cells to matrix cells. We made a new functional metal oxide with CARS and expect to realize CARS in other metal oxide structures in the future by using the above-mentioned process.

  14. 12. "TEST STAND; STRUCTURAL; DEFLECTOR PIT DETAILS, SHEET NO. 1." ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. "TEST STAND; STRUCTURAL; DEFLECTOR PIT DETAILS, SHEET NO. 1." Specifications No. ENG-04-353-55-72; Drawing No. 60-09-12; sheet 41 of 148; file no. 1320/92, Rev. A. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract no. 4338, no change. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  15. 27. "TEST STAND; STRUCTURAL; SIDEWALL, NORTH WALL AND SOUTH WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. "TEST STAND; STRUCTURAL; SIDEWALL, NORTH WALL AND SOUTH WALL FRAMING ELEVATIONS." Specifications No. ENG-04353-55-72; Drawing No. 60-09-12; sheet 27 of 148; file no. 1320/78. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract no. 4338, Rev. B; date: 15 April 1957. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  16. 9. "TEST STAND; STRUCTURAL; CABLE TUNNEL, PLAN, SECTIONS, DETAILS." Specifications ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. "TEST STAND; STRUCTURAL; CABLE TUNNEL, PLAN, SECTIONS, DETAILS." Specifications No. OC1-55-72-(Rev.); Drawing No. 60-09-12; sheet 43 of 148; file no. AF 1320/94, Rev. A. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract no. 4338, no change. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  17. Structure Property Relationships of Carboxylic Acid Isosteres.

    PubMed

    Lassalas, Pierrik; Gay, Bryant; Lasfargeas, Caroline; James, Michael J; Tran, Van; Vijayendran, Krishna G; Brunden, Kurt R; Kozlowski, Marisa C; Thomas, Craig J; Smith, Amos B; Huryn, Donna M; Ballatore, Carlo

    2016-04-14

    The replacement of a carboxylic acid with a surrogate structure, or (bio)-isostere, is a classical strategy in medicinal chemistry. The general underlying principle is that by maintaining the features of the carboxylic acid critical for biological activity, but appropriately modifying the physicochemical properties, improved analogs may result. In this context, a systematic assessment of the physicochemical properties of carboxylic acid isosteres would be desirable to enable more informed decisions of potential replacements to be used for analog design. Herein we report the structure-property relationships (SPR) of 35 phenylpropionic acid derivatives, in which the carboxylic acid moiety is replaced with a series of known isosteres. The data set generated provides an assessment of the relative impact on the physicochemical properties that these replacements may have compared to the carboxylic acid analog. As such, this study presents a framework for how to rationally apply isosteric replacements of the carboxylic acid functional group.

  18. Photographic copy of drawing by Modjeski and Masters, Engineers of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of drawing by Modjeski and Masters, Engineers of the proposed Huey P. Long Bridge Widening. Original drawing located in the office of Modjeski and Masters, Consulting Engineers at 1055 St. Charles Avenue, New Orleans, LA. 70130. MAY 13, 2005 DRAWING OF THE PROPOSED HUEY P. LONG BRIDGE WIDENING, U.S. 90, MAIN BRIDGE SUPERSTRUCTURE, SHOWING STRUCTURE PLAN AND ELEVATION -2 AND TYPICAL SECTION THROUGH BRIDGE AT PIER I AND II. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

  19. Understanding Elementary Astronomy by Making Drawing-Based Models

    NASA Astrophysics Data System (ADS)

    van Joolingen, W. R.; Aukes, Annika V. A.; Gijlers, H.; Bollen, L.

    2015-04-01

    Modeling is an important approach in the teaching and learning of science. In this study, we attempt to bring modeling within the reach of young children by creating the SimSketch modeling system, which is based on freehand drawings that can be turned into simulations. This system was used by 247 children (ages ranging from 7 to 15) to create a drawing-based model of the solar system. The results show that children in the target age group are capable of creating a drawing-based model of the solar system and can use it to show the situations in which eclipses occur. Structural equation modeling predicting post-test knowledge scores based on learners' pre-test knowledge scores, the quality of their drawings and motivational aspects yielded some evidence that such drawing contributes to learning. Consequences for using modeling with young children are considered.

  20. Tree regeneration spatial patterns in ponderosa pine forests following stand-replacing fire: Influence of topography and neighbors

    Treesearch

    Justin P. Ziegler; Chad M. Hoffman; Paula J. Fornwalt; Carolyn H. Sieg; Michael A. Battaglia; Marin E. Chambers; Jose M. Iniguez

    2017-01-01

    Shifting fire regimes alter forest structure assembly in ponderosa pine forests and may produce structural heterogeneity following stand-replacing fire due, in part, to fine-scale variability in growing environments. We mapped tree regeneration in eighteen plots 11 to 15 years after stand-replacing fire in Colorado and South Dakota, USA. We used point pattern analyses...

  1. Property development for biaxial drawing of ethylene-tetrafluoroehtylene copolymer films and resultant fractural behavior analyzed by in situ X-ray measurements.

    PubMed

    Uehara, Hiroki; Ono, Yasunori; Kakiage, Masaki; Sakamura, Takumi; Masunaga, Hiroyasu; Yukawa, Yasumasa; Higuchi, Yoshiaki; Kamiya, Hiroki; Yamanobe, Takeshi

    2015-03-19

    The property development of the ethylene-tetrafluoroethylene copolymer (ETFE) membrane induced by simultaneous biaxial drawing was investigated. Commonly, tensile strength can be increased by drawing; conversely, tear resistance decreases. In this study, the balance between tensile strength and tear resistance for the resultant ETFE membrane was optimized achieved by a combination of lamination of low molecular weight (LMW) and high molecular weight (HMW) layers and subsequent biaxial drawing. The structural factor determining tear resistance of these biaxially drawn membranes was determined based on in situ small-angle X-ray scattering (SAXS) measurement during tensile deformation simulating tearing tests. Lozenge shaped scattering, which indicated inclined lamellae, was observed during such tensile deformation of the resultant membranes. Remarkably, this inclined lamellar structure was observed for the pure LMW membrane; however, it also appeared at the interface between LMW and HMW layers within biaxially drawn membranes. For the membrane exhibiting the highest tearing strength, the fraction of such inclined lamella increased up to the critical strain corresponding to the actual sample breaking. These results confirm that the inclined lamellar structure absorbed strain during membrane tearing.

  2. Short-term outcome of 1,465 computer-navigated primary total knee replacements 2005-2008.

    PubMed

    Gøthesen, Oystein; Espehaug, Birgitte; Havelin, Leif; Petursson, Gunnar; Furnes, Ove

    2011-06-01

    and purpose Improvement of positioning and alignment by the use of computer-assisted surgery (CAS) might improve longevity and function in total knee replacements, but there is little evidence. In this study, we evaluated the short-term results of computer-navigated knee replacements based on data from the Norwegian Arthroplasty Register. Primary total knee replacements without patella resurfacing, reported to the Norwegian Arthroplasty Register during the years 2005-2008, were evaluated. The 5 most common implants and the 3 most common navigation systems were selected. Cemented, uncemented, and hybrid knees were included. With the risk of revision for any cause as the primary endpoint and intraoperative complications and operating time as secondary outcomes, 1,465 computer-navigated knee replacements (CAS) and 8,214 conventionally operated knee replacements (CON) were compared. Kaplan-Meier survival analysis and Cox regression analysis with adjustment for age, sex, prosthesis brand, fixation method, previous knee surgery, preoperative diagnosis, and ASA category were used. Kaplan-Meier estimated survival at 2 years was 98% (95% CI: 97.5-98.3) in the CON group and 96% (95% CI: 95.0-97.8) in the CAS group. The adjusted Cox regression analysis showed a higher risk of revision in the CAS group (RR = 1.7, 95% CI: 1.1-2.5; p = 0.02). The LCS Complete knee had a higher risk of revision with CAS than with CON (RR = 2.1, 95% CI: 1.3-3.4; p = 0.004)). The differences were not statistically significant for the other prosthesis brands. Mean operating time was 15 min longer in the CAS group. With the introduction of computer-navigated knee replacement surgery in Norway, the short-term risk of revision has increased for computer-navigated replacement with the LCS Complete. The mechanisms of failure of these implantations should be explored in greater depth, and in this study we have not been able to draw conclusions regarding causation.

  3. DRAWING SKILLS IN CHILDREN WITH NEURODEVELOPMENTAL DELAY AGED 2-5 YEARS.

    PubMed

    Morović, Maja Lang; Matijević, Valentina; Divljaković, Kristina; Kraljević, Marija; Dimić, Zdenka

    2015-06-01

    In typically developing children, drawing development occurs in stages from uncontrolled strokes to complex drawing. In this study, we examined drawing development in children with neurodevelopmental delay (NDD). In order to do so, we observed the influence of age, intraventricular hemorrhage (IVH) and gender on the development of drawing skills. The sample consisted of 52 children with NDD, aged 2 years and 6 months to 5 years. All children were hospitalized for multidisciplinary team monitoring and developmental support. The evaluation of drawing development was administered by giving each child a blank A4 paper and the instruction to draw anything they wanted. All of the drawings were scored satisfactory or unsatisfactory. Descriptive statistics was employed on all relevant data to show results in frequencies and percentages. In order to determine differences between groups, the χ2-test was administered. The results showed greatest difference in drawing in children aged from 3 years to 3 years and 11 months. Children with lower IVH had better drawing scores than children with higher IVH levels. According to gender dissimilarities, a difference was found showing girls to have better drawing skills than boys. All study results pointed to the importance of early rehabilitation and continuous structured work with children with NDD.

  4. 21. Photocopy of engineering drawing. COMPLEX 17A AND B: SERVICE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. Photocopy of engineering drawing. COMPLEX 17A AND B: SERVICE STRUCTURE SPACECRAFT AREA-MECHANICAL, ELEVATIONS, SHEET 4, DECEMBER 1965. - Cape Canaveral Air Station, Launch Complex 17, Facility 28417, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  5. 23 CFR 650.407 - Application for bridge replacement or rehabilitation.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Application for bridge replacement or rehabilitation... ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Highway Bridge Replacement and Rehabilitation Program § 650.407 Application for bridge replacement or rehabilitation. (a) Agencies participate...

  6. 23 CFR 650.411 - Procedures for bridge replacement and rehabilitation projects.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Procedures for bridge replacement and rehabilitation... ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Highway Bridge Replacement and Rehabilitation Program § 650.411 Procedures for bridge replacement and rehabilitation projects. (a) Consideration...

  7. 23 CFR 650.411 - Procedures for bridge replacement and rehabilitation projects.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Procedures for bridge replacement and rehabilitation... ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Highway Bridge Replacement and Rehabilitation Program § 650.411 Procedures for bridge replacement and rehabilitation projects. (a) Consideration...

  8. 23 CFR 650.407 - Application for bridge replacement or rehabilitation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Application for bridge replacement or rehabilitation... ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Highway Bridge Replacement and Rehabilitation Program § 650.407 Application for bridge replacement or rehabilitation. (a) Agencies participate...

  9. Development of Pantothenate Analogs That Can Treat Combat-Related Infections

    DTIC Science & Technology

    2014-04-01

    determined by the molecular replacement method using the structure of S. aureus PanK excluding bound AMPPNP as a search model ( PDB code 2EWS). The...were solved by molecular replacement using the program PHASER11 and the EcPanK structure as a search model ( PDB : 1SQ5). The models went through...aureus PanK (SaPanK) complexed with N5- Pan (months 1-3) We solved the structure of the SaPanK�N5-Pan complex by the molecular replacement method

  10. Assessment of nerve involvement in the lumbar spine: agreement between magnetic resonance imaging, physical examination and pain drawing findings.

    PubMed

    Bertilson, Bo C; Brosjö, Eva; Billing, Hans; Strender, Lars-Erik

    2010-09-10

    Detection of nerve involvement originating in the spine is a primary concern in the assessment of spine symptoms. Magnetic resonance imaging (MRI) has become the diagnostic method of choice for this detection. However, the agreement between MRI and other diagnostic methods for detecting nerve involvement has not been fully evaluated. The aim of this diagnostic study was to evaluate the agreement between nerve involvement visible in MRI and findings of nerve involvement detected in a structured physical examination and a simplified pain drawing. Sixty-one consecutive patients referred for MRI of the lumbar spine were - without knowledge of MRI findings - assessed for nerve involvement with a simplified pain drawing and a structured physical examination. Agreement between findings was calculated as overall agreement, the p value for McNemar's exact test, specificity, sensitivity, and positive and negative predictive values. MRI-visible nerve involvement was significantly less common than, and showed weak agreement with, physical examination and pain drawing findings of nerve involvement in corresponding body segments. In spine segment L4-5, where most findings of nerve involvement were detected, the mean sensitivity of MRI-visible nerve involvement to a positive neurological test in the physical examination ranged from 16-37%. The mean specificity of MRI-visible nerve involvement in the same segment ranged from 61-77%. Positive and negative predictive values of MRI-visible nerve involvement in segment L4-5 ranged from 22-78% and 28-56% respectively. In patients with long-standing nerve root symptoms referred for lumbar MRI, MRI-visible nerve involvement significantly underestimates the presence of nerve involvement detected by a physical examination and a pain drawing. A structured physical examination and a simplified pain drawing may reveal that many patients with "MRI-invisible" lumbar symptoms need treatment aimed at nerve involvement. Factors other than present MRI-visible nerve involvement may be responsible for findings of nerve involvement in the physical examination and the pain drawing.

  11. Breeding birds and vegetation structure in western North Dakota wooded draws

    USGS Publications Warehouse

    Faanes, C.A.

    1987-01-01

    Populations and distribution of breeding birds occupying wooded draws were studied in a five-county region of western North Dakota during June 1982. Wooded draw vegetation was dominated by green ash, which occurred in 96% of the draws sampled. Chokecherry and juneberry were the most frequent shrub species. I recorded 49 bird species in the 30 draws censused. Rufous-sided towhee, brown-headed cowbird, house wren, and American goldfinch were the most numerous bird species present. Significant correlations were found between (1) the number of live trees and bird species evenness, (2) density of dead trees and bird species diversity and richness, (3) density of shrubs with bird species evenness, and (4) foliage volume in the high ground layer and bird species evenness.

  12. Biomimicry of surfactant protein C.

    PubMed

    Brown, Nathan J; Johansson, Jan; Barron, Annelise E

    2008-10-01

    Since the widespread use of exogenous lung surfactant to treat neonatal respiratory distress syndrome, premature infant survival and respiratory morbidity have dramatically improved. Despite the effectiveness of the animal-derived surfactant preparations, there still remain some concerns and difficulties associated with their use. This has prompted investigation into the creation of synthetic surfactant preparations. However, to date, no clinically used synthetic formulation is as effective as the natural material. This is largely because the previous synthetic formulations lacked analogues of the hydrophobic proteins of the lung surfactant system, SP-B and SP-C, which are critical functional constituents. As a result, recent investigation has turned toward the development of a new generation of synthetic, biomimetic surfactants that contain synthetic phospholipids along with a mimic of the hydrophobic protein portion of lung surfactant. In this Account, we detail our efforts in creating accurate mimics of SP-C for use in a synthetic surfactant replacement therapy. Despite SP-C's seemingly simple structure, the predominantly helical protein is extraordinarily challenging to work with given its extreme hydrophobicity and structural instability, which greatly complicates the creation of an effective SP-C analogue. Drawing inspiration from Nature, two promising biomimetic approaches have led to the creation of rationally designed biopolymers that recapitulate many of SP-C's molecular features. The first approach utilizes detailed SP-C structure-activity relationships and amino acid folding propensities to create a peptide-based analogue, SP-C33. In SP-C33, the problematic and metastable polyvaline helix is replaced with a structurally stable polyleucine helix and includes a well-placed positive charge to prevent aggregation. SP-C33 is structurally stable and eliminates the association propensity of the native protein. The second approach follows the same design considerations but makes use of a non-natural, poly-N-substituted glycine or "peptoid" scaffold to circumvent the difficulties associated with SP-C. By incorporating unique biomimetic side chains in a non-natural backbone, the peptoid mimic captures both SP-C's hydrophobic patterning and its helical secondary structure. Despite the differences in structure, both SP-C33 and the SP-C peptoid mimic capture many requisite features of SP-C. In a surfactant environment, these analogues also replicate many of the key surface activities necessary for a functional biomimetic surfactant therapy while overcoming the difficulties associated with the natural protein. With improved stability, greater production potential, and elimination of possible pathogenic contamination, these biomimetic surfactant formulations offer not only the potential to improve the treatment of respiratory distress syndrome but also the opportunity to treat other respiratory-related disorders.

  13. A Comparative Study on Formability of the Third-Generation Automotive Medium-Mn Steel and 22MnB5 Steel

    NASA Astrophysics Data System (ADS)

    Zheng, Guojun; Li, Xiaodong; Chang, Ying; Wang, Cunyu; Dong, Han

    2018-02-01

    Third-generation advanced automotive medium-Mn steel, which can replace 22MnB5 steel, was newly developed to improve the lightweight and crashworthiness of automobile. Studies on the formability and simulation method of medium-Mn steel have just been initiated. In this study, finite element simulation models of square-cup deep drawing were established based on various material property experiments and validated by experiments. The effects of blank holder force (BHF), fillet radii of tools (die and punch) on the maximum drawing depth (MDD), thickness distribution of the formed products, and the microstructure before and after forming were investigated and compared with those on 22MnB5 steel. Results show that the MDD of the two steels decreased with increased BHF but increased with the fillet radius of punch; however, the fillet radius of die showed no significant effect on the MDD for both steels. Compared with hot-formed 22MnB5 steel, the martensitic transformation of the hot-formed medium-Mn steel is rarely influenced by the process parameters; thus, it holds the complete, fine-grained, and uniform martensitic microstructure. Moreover, the medium-Mn has better formability, lower initial blank temperature, and smaller impact of BHF and fillet radius of tools on the hot-formed product. Thus, a theoretical basis for the replacement of 22MnB5 steel by medium-Mn steel in hot forming process is provided.

  14. Inter-professional electronic documents and child health: a study of persisting non-electronic communication in the use of electronic documents.

    PubMed

    Saario, Sirpa; Hall, Christopher; Peckover, Sue

    2012-12-01

    Information and communication technologies are widely used in health and social care settings to replace previous means of record keeping, assessment and communication. Commentary on the strengths and weaknesses of such systems abound, thus it is useful to examine how they are used in practice. This article draws on findings from two separate studies, conducted between 2005 and 2007, which examined how child health and welfare professionals use electronic documents in Finland and England. Known respectively as Miranda and CAF, these systems are different in terms of structure and function but in their everyday use common features are identified, notably the continued use of and reliance on non-electronic means of communication. Based on interviews with professionals, three forms of non-electronic communication are described: alternative records, phone calls and letters, which facilitate the sharing of the electronic record. Finally, the electronic documents are further analysed as potential boundary objects which aim to create common understanding between sites and professionals. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Integrated piezoelectric actuators in deep drawing tools

    NASA Astrophysics Data System (ADS)

    Neugebauer, R.; Mainda, P.; Drossel, W.-G.; Kerschner, M.; Wolf, K.

    2011-04-01

    The production of car body panels are defective in succession of process fluctuations. Thus the produced car body panel can be precise or damaged. To reduce the error rate, an intelligent deep drawing tool was developed at the Fraunhofer Institute for Machine Tools and Forming Technology IWU in cooperation with Audi and Volkswagen. Mechatronic components in a closed-loop control is the main differentiating factor between an intelligent and a conventional deep drawing tool. In correlation with sensors for process monitoring, the intelligent tool consists of piezoelectric actuators to actuate the deep drawing process. By enabling the usage of sensors and actuators at the die, the forming tool transform to a smart structure. The interface between sensors and actuators will be realized with a closed-loop control. The content of this research will present the experimental results with the piezoelectric actuator. For the analysis a production-oriented forming tool with all automotive requirements were used. The disposed actuators are monolithic multilayer actuators of the piezo injector system. In order to achieve required force, the actuators are combined in a cluster. The cluster is redundant and economical. In addition to the detailed assembly structures, this research will highlight intensive analysis with the intelligent deep drawing tool.

  16. Enhancing observation by drawing: Alveolinids models by Manfred Reichel (1896-1984)

    NASA Astrophysics Data System (ADS)

    Leria, Maria

    2017-04-01

    Graphic representation is a fundamental tool in morphological studies, as paleontology. A paradigmatic example is the alveolinid drawings of Prof. Manfred Reichel (1896-1984). Thanks to these drawings his research on foraminifera, had an important impact on micropaleontology. Manfred Reichel studied Fine Arts, but later he began a scientific career on biological sciences and becoming a professor in micropaleontology, at the Geological and Paleontological Institute of the University of Basel, Switzerland. His background in art had a benefit in his scientific production, especially with the extremely complex foraminiferal structures. By means of illustrations, inspired by the French naturalists, he was able to solve the most complex internal architecture of forams. His drawings display foraminifera's internal 3D structure in such a comprehensible way that has not been improved using modern techniques. His work has been used by different generations of paleontologist to understand the internal architecture of forams and are still used today. The aim of this study is to analyze the process that Reichel followed to create some of his most representative drawings. This study is based on the examination of a selection of Reichel's drawings (n>40) held at the Natural History Museum in Basel. In addition, his family and students have been interviewed supplying useful information to understand how he applied his artistic skills to teach and research. This study illustrates the steps followed by Reichel in the creation of a drawing of alveolinid. The process represents the transformation of the morphological data from 2D images (polished rock sections) into a comprehensible 3D image. A description of the process of observation, comparison, sketches and studies, concluding with the final three-dimensional drawing is shown. The results show that that the classical convention in drawing is still and irreplaceable tool in natural sciences, because it allows to define aspects that cannot be equally appreciated shown by other means (text or photography). Drawing it can also be a scientific analytical tool with an artistic identity, we present an example where rigor is intrinsically linked to a high sensibility, and a deep knowledge of drawing that brings as a result a beautiful piece of art.

  17. 12. "OBSERVATION POSTS, STRUCTURAL PLANS AND DETAILS." Specifications No. OC25572; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. "OBSERVATION POSTS, STRUCTURAL PLANS AND DETAILS." Specifications No. OC2-55-72; Drawing No. 60-09-12; sheet 89 of 148; file no. 1321/40, Rev. A. Very faint stamp above note reads: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract no. 4338, no change. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Observation Bunkers for Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  18. [EU-Cosmetics: timetables for the replacement of animal experiments].

    PubMed

    Ruhdel, Irmela Wiltrud

    2005-01-01

    According to the 7(th) Amendment of the Cosmetics Directive the European Commission had to establish timetables for the phasing out of the various animal tests for the safety evaluation of ingredients used in cosmetics. However, the published timetables do not reflect the objectives of the 7(th) Amendment but contain longer deadlines for the ban on animal experiments of several endpoints. The European Commission also had to draw up a Directive for establishing an Annex IX that should list validated alternative methods which are not already listed in Annex V of the Dangerous Substances Directive. Although various alternative methods could have been listed in this Annex IX, the Commission published an empty table. From the point of view of the German Animal Welfare Federation amendments of the timetables and the Directive establishing Annex IX are urgently required. Additionally, the Commission has to provide optimal conditions for the replacement of alternative methods.

  19. Replace with abstract title

    NASA Astrophysics Data System (ADS)

    Coho, Aleksander; Kioussis, Nicholas

    2003-03-01

    We use the semidiscrete variational generelized Peierls-Nabarro model to study the effect of Cu alloying on the dislocation properties of Al. First-principles density functional theory (DFT) is used to calculate the generalized-stacking-fault (GSF) energy surface when a <111> plane, on which one in four Al atoms has been replaced with a Cu atom, slips over a pure Al <111> plane. Various dislocation core properties (core width, energy, Peierls stress, dissociation tendency) are investigated and compared with the pure Al case. Cu alloying lowers the intrinsic stacking fault (ISF) energy, which makes dislocations more likely to dissociate into partials. We also try to understand the lowering of ISF energy in terms of Al-Cu and Al-Al bond formation and braking during shearing along the <112> direction. From the above we draw conclusions about the effects of Cu alloying on the mechanical properties of Al.

  20. 19. Photocopy of engineering drawing. COMPLEX 17A AND B: SERVICE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Photocopy of engineering drawing. COMPLEX 17A AND B: SERVICE STRUCTURE SPACECRAFT AREA A/C-MECHANICAL, ELEVATIONS, SHEET 3, DECEMBER 1965. - Cape Canaveral Air Station, Launch Complex 17, Facility 28416, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  1. Student conceptions about the DNA structure within a hierarchical organizational level: Improvement by experiment- and computer-based outreach learning.

    PubMed

    Langheinrich, Jessica; Bogner, Franz X

    2015-01-01

    As non-scientific conceptions interfere with learning processes, teachers need both, to know about them and to address them in their classrooms. For our study, based on 182 eleventh graders, we analyzed the level of conceptual understanding by implementing the "draw and write" technique during a computer-supported gene technology module. To give participants the hierarchical organizational level which they have to draw, was a specific feature of our study. We introduced two objective category systems for analyzing drawings and inscriptions. Our results indicated a long- as well as a short-term increase in the level of conceptual understanding and in the number of drawn elements and their grades concerning the DNA structure. Consequently, we regard the "draw and write" technique as a tool for a teacher to get to know students' alternative conceptions. Furthermore, our study points the modification potential of hands-on and computer-supported learning modules. © 2015 The International Union of Biochemistry and Molecular Biology.

  2. Method of making large area conformable shape structures for detector/sensor applications using glass drawing technique and postprocessing

    DOEpatents

    Ivanov, Ilia N [Knoxville, TN; Simpson, John T [Clinton, IN

    2012-01-24

    A method of making a large area conformable shape structure comprises drawing a plurality of tubes to form a plurality of drawn tubes, and cutting the plurality of drawn tubes into cut drawn tubes of a predetermined shape. The cut drawn tubes have a first end and a second end along the longitudinal direction of the cut drawn tubes. The method further comprises conforming the first end of the cut drawn tubes into a predetermined curve to form the large area conformable shape structure, wherein the cut drawn tubes contain a material.

  3. [Drawing of the family and of the human figure: a comparative study between children with epilepsy and a control group].

    PubMed

    Gomes-Correia, A

    In this study our aim was to get to know children with epilepsy through their drawings. In this case the drawings of the human figure and the family were chosen. The population which was studied included 32 children: 16 of these children had epilepsy and the 16 others were the control group. From the comparison performed between these two groups of children it was found that in relation to family drawings children with epilepsy tend more to draw their own family than children in the control group. As for the drawing of the human figure and the global analysis of the body figure it was found that the mental age of the isolated character and the higher level character drawn by epileptic children was inferior to chronological age, while the reverse was true in the drawings of the control group. In relation to the analysis of structural cohesion in the representation of the body it was found that hands were absent in the drawings of epileptic children.

  4. Elimination of Coast Guard plan review for non-critical engineering systems and cargo barges

    DOT National Transportation Integrated Search

    1994-06-21

    The purpose of this Circular is to publish policy that provides for the elimination of Coast Guard review and approval of certain engineering system drawings for all vessels as well as structural drawings for Coast Guard inspected non-self propelled ...

  5. 40. Photocopy of engineering drawing. LC17B LONG TANK DELTA UPBUILD ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    40. Photocopy of engineering drawing. LC-17B LONG TANK DELTA UPBUILD LAUNCH DECK: NEW PLATE AT LAUNCH MOUNT AREA-STRUCTURAL, APRIL 1969. - Cape Canaveral Air Station, Launch Complex 17, Facility 28402, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  6. 7. Photocopy of War Department drawing (original located at Fort ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photocopy of War Department drawing (original located at Fort McCoy, Wisconsin). ARCHITECTURAL, STRUCTURAL, PLUMBING, HEATING, ELECTRICAL, PLAN NUMBER 800-308 - Fort McCoy, Building No. T-901, 125' South of Intersection of East "S" Street & East Twelfth Avenue, Sparta, Monroe County, WI

  7. Structured methods and striking moments: using question sequences in "living" ways.

    PubMed

    Lowe, Roger

    2005-03-01

    This article draws together two seemingly incompatible practices in social constructionist therapies: the use of structured questioning methods (associated with solution-focused and narrative therapies) and the poetic elaboration of "striking moments" (associated with conversational therapies). To what extent can we value and use both styles of practice? Beginning with practitioners' concerns about the use of structured question sequences, I explore possibilities for resituating these methods in different conceptual and metaphorical frames, selectively drawing on ideas from the philosophy of striking moments. The aim is not to reduce one therapeutic style to another, but to encourage the teaching and practice of structured methods in more creative, improvisational, and "living" ways.

  8. Fabrication of Continuous Microfibers Containing Magnetic Nanoparticles by a Facile Magneto-Mechanical Drawing

    NASA Astrophysics Data System (ADS)

    Li, Jin-Tao; Jia, Xian-Sheng; Yu, Gui-Feng; Yan, Xu; He, Xiao-Xiao; Yu, Miao; Gong, Mao-Gang; Ning, Xin; Long, Yun-Ze

    2016-09-01

    A facile method termed magneto-mechanical drawing is used to produce polymer composite microfibers. Compared with electrospinning and other fiber spinning methods, magneto-mechanical drawing uses magnetic force generated by a permanent magnet to draw droplets of polymer/magnetic nanoparticle suspensions, leading to fabrication of composite microfibers. In addition, because of the rotating collector, it is easy to control the fiber assembly such as fibrous array in parallel or crossed fibrous structure. The general applicability of this method has also been proved by spinning different polymers and magnetic nanoparticles. The resultant fibers exhibit good superparamagnetic behavior at room temperature and ultrahigh stretchability (~443.8 %). The results indicate that magneto-mechanical drawing is a promising technique to fabricate magnetic and stretchable microfibers and devices.

  9. Fabrication of Continuous Microfibers Containing Magnetic Nanoparticles by a Facile Magneto-Mechanical Drawing.

    PubMed

    Li, Jin-Tao; Jia, Xian-Sheng; Yu, Gui-Feng; Yan, Xu; He, Xiao-Xiao; Yu, Miao; Gong, Mao-Gang; Ning, Xin; Long, Yun-Ze

    2016-12-01

    A facile method termed magneto-mechanical drawing is used to produce polymer composite microfibers. Compared with electrospinning and other fiber spinning methods, magneto-mechanical drawing uses magnetic force generated by a permanent magnet to draw droplets of polymer/magnetic nanoparticle suspensions, leading to fabrication of composite microfibers. In addition, because of the rotating collector, it is easy to control the fiber assembly such as fibrous array in parallel or crossed fibrous structure. The general applicability of this method has also been proved by spinning different polymers and magnetic nanoparticles. The resultant fibers exhibit good superparamagnetic behavior at room temperature and ultrahigh stretchability (~443.8 %). The results indicate that magneto-mechanical drawing is a promising technique to fabricate magnetic and stretchable microfibers and devices.

  10. 4. "TEST STAND NO. 13, CONCRETE STRUCTURAL PLAN AND ELEVATION." ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. "TEST STAND NO. 1-3, CONCRETE STRUCTURAL PLAN AND ELEVATION." Specifications No. OC11-50-10; Drawing No. 60-09-06; no sheet number within title block. D.O. SERIES 1109/12 REV. E. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract DA-04-353 Eng. 177, Rev. E; Date: 17 Dec. 1951. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-3, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

  11. 11. "TEST STANDS NOS. 11, 13, & 15; CONCRETE STRUCTURAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. "TEST STANDS NOS. 1-1, 1-3, & 1-5; CONCRETE STRUCTURAL SECTIONS AND DETAILS." Specifications No. OC12-50-10; Drawing No. 60-09-04; no sheet number within title block. D.O. SERIES 1109/15, Rev. E. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract DA-04353 Eng. 177, Rev. E; Date: 21 Dec. 1951. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-5, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

  12. 13. "TEST STANDS NOS. 11, 13, & 15; CONCRETE STRUCTURAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. "TEST STANDS NOS. 1-1, 1-3, & 1-5; CONCRETE STRUCTURAL SECTIONS AND DETAILS." Specifications No. OC12-50-10; Drawing No. 60-09-04; no sheet number within title block. D.O. SERIES 1109/18, Rev. D. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract DA-04353 Eng. 177, Rev. D, no change; Date: 18 Dec. 1951. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-5, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

  13. 15. "TEST STANDS NOS. 11, 13, & 15; STRUCTURAL STEEL; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. "TEST STANDS NOS. 1-1, 1-3, & 1-5; STRUCTURAL STEEL; PLAN & DETAILS." Specifications No. ENG 04-353-50-10; Drawing No. 60-09-04; no sheet number within title block. D.O. SERIES 1109/34, Rev. A. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract DA-04353 Eng. 177, Rev. A, no change; Date: 21 Dec. 1951. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-5, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

  14. 9. "TEST STANDS NOS. 11, 13, & 15; CONCRETE STRUCTURAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. "TEST STANDS NOS. 1-1, 1-3, & 1-5; CONCRETE STRUCTURAL SECTIONS AND DETAILS." Specifications No. ENG 04-35350-10; Drawing No. 60-09-04; no sheet number within title block. D.O. SERIES 1109/13. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract DA-04353 Eng. 177, no change; Date: 17 Dec. 1951. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-5, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

  15. 10. "TEST STANDS NOS. 11, 13, & 15; CONCRETE STRUCTURAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. "TEST STANDS NOS. 1-1, 1-3, & 1-5; CONCRETE STRUCTURAL SECTIONS AND DETAILS." Specifications No. OC12-50-10; Drawing No. 60-09-04; no sheet number within title block. D.O. SERIES 1109/14, Rev. B. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract DA-04353 Eng. 177, Rev. B; Date: 21 Dec. 1951. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-5, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

  16. 16. "TEST STANDS NOS. 11, 13, & 15; STRUCTURAL STEEL; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. "TEST STANDS NOS. 1-1, 1-3, & 1-5; STRUCTURAL STEEL; ELEVATIONS AND SECTIONS." Specifications No. ENG 04353-50-10; Drawing No. 60-09-04; no sheet number within title block. D.O. SERIES 1109/35, Rev. A. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract DA-04-353 Eng. 177, Rev. A; Date: 29 Dec. 1951. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-5, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

  17. 12. "TEST STANDS NOS. 11, 13, & 15; CONCRETE STRUCTURAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. "TEST STANDS NOS. 1-1, 1-3, & 1-5; CONCRETE STRUCTURAL SECTIONS AND DETAILS." Specifications No. OC12-50-10; Drawing No. 60-09-06; no sheet number within title block. D.O. SERIES 1109/16, Rev. E. Stamped: RECORD DRAWING - AS CONSTRUCTED. Below stamp: Contract DA-04353 Eng. 177, Rev. E; Date: 26 Dec. 1951. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-5, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

  18. Post-fire assessment of structural wood members

    Treesearch

    Robert J. Ross; Brian K. Brashaw; Xiping Wang; Robert H. White; Roy F. Pellerin

    2005-01-01

    Since the interior of a charred wood member normally retains its structural integrity, large structural wood members often do not need to be replaced after a fire. Engineering judgement is required to determine which members can remain and which members need to be replaced or repaired. Due to the lack of established methods to directly determine the residual capacity...

  19. Electron beam weld development on a Filter Pack Assembly

    NASA Astrophysics Data System (ADS)

    Dereskiewicz, J. P.

    1994-06-01

    A continuous electron beam welding procedure was developed to replace the manual gas tungsten arc welding procedure on the Filter Pack Assembly. A statistical study was used to evaluate the feasibility of electron beam welding 6061-T6 aluminum covers to A356 cast weldments throughout the joint tolerance range specified on product drawings. Peak temperature exposures were not high enough to degrade the heat sensitive electrical components inside the cast weldment. Actual weldments with alodine coating on the weld joint area were successfully cleaned using a nonmetallic fiberglass brush cleaning method.

  20. Government Draw Bentonite Beds: a newly identified stratigraphic marker in the Virgin Creek Member of the Pierre Shale, central South Dakota ( USA).

    USGS Publications Warehouse

    Nichols, T.C.; Chleborad, A.F.; Collins, D.S.

    1987-01-01

    A grouping of four bentonite beds, herein named the Government Draw Bentonite Beds, is identified as a stratigraphic marker within the Virgin Creek Member of the Pierre Shale. The beds are found west of Pierre, South Dakota, over an area of at least 130 mi2 (210 km2) where no other markers within the Virgin Creek Member have been identified. In this area, the Government Draw is a potential tool needed to determine the stratigraphic and structural relationships within the upper part of the Pierre Shale, heretofore little known. A better understanding of structural elements found in the Pierre Shale is needed to unravel the Late Cretaceous and younger geologic history of the area. -Authors

  1. 23 CFR 661.19 - When is a bridge eligible for replacement?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false When is a bridge eligible for replacement? 661.19... TRAFFIC OPERATIONS INDIAN RESERVATION ROAD BRIDGE PROGRAM § 661.19 When is a bridge eligible for replacement? To be eligible for replacement, the bridge must be considered structurally deficient or...

  2. 23 CFR 661.19 - When is a bridge eligible for replacement?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false When is a bridge eligible for replacement? 661.19... TRAFFIC OPERATIONS INDIAN RESERVATION ROAD BRIDGE PROGRAM § 661.19 When is a bridge eligible for replacement? To be eligible for replacement, the bridge must be considered structurally deficient or...

  3. 32. Photocopy of engineering drawing. NEW WHITE ROOM AND MULTISOLIDS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. Photocopy of engineering drawing. NEW WHITE ROOM AND MULTISOLIDS MODIFICATIONS FOR STRETCHED TANK DELTA, LAUNCH COMPLEX 17-A: UMBILICAL MAST ELEVATIONS-REMOVAL WORK, STRUCTURAL, APRIL 1969. - Cape Canaveral Air Station, Launch Complex 17, Facility 28501, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  4. Dynamic Anatomy.

    ERIC Educational Resources Information Center

    Hogarth, Burne

    This student artist's handbook uses drawings and diagrams to demonstrate the basic structure, proportions, and expressive nature of the human form from an artist's point of view. Emphasis is placed upon the relationship of mass to movement. Drawings of the figure in action reveal the rhythmic relationship of muscles and their effect upon surface…

  5. Surprising Styrofoam Structures

    ERIC Educational Resources Information Center

    Hicks, Bill

    2010-01-01

    In this article, the author describes an art project intended for high-school students to create a three-dimensional design using a Styrofoam. The students were asked to find and take photos of architectural details, such as decorative columns, and use the photograph as inspiration in their drawings. The drawings served as a "blueprint" to help…

  6. Acts of Construction: The Conditions of Collaboration. A Response to Vassiliki Papatsiba

    ERIC Educational Resources Information Center

    Ozga, Jenny

    2013-01-01

    This response to Vassiliki Papatsiba's article on collaboration draws attention to structural barriers to collaborative research: for example, increased competition for scarce resources, increased steering of research, and the casualisation of research workers. It draws on experience of collaborative work in a large, EU-funded project to…

  7. 7. Photographic copy of construction drawing 6912132 (from record group ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photographic copy of construction drawing 6912132 (from record group of Civil Engineering, Hill Air Force Base, Utah). 1940. 8'x10' negative and print. HILL FIELD, UTAH, QM GAS & OIL HOUSE PLAN, ELEVATIONS, DETAIL & STRUCTURAL. - Hill Field, Quatermaster Gas & Oil House, 7326 Wardleigh Road, Layton, Davis County, UT

  8. Molecular replacement: tricks and treats

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Abergel, Chantal, E-mail: chantal.abergel@igs.cnrs-mrs.fr

    2013-11-01

    To be successful, molecular replacement relies on the quality of the model and of the crystallographic data. Some tricks that could be applied to the models or to the crystal to increase the success rate of MR are discussed here. Molecular replacement is the method of choice for X-ray crystallographic structure determination provided that suitable structural homologues are available in the PDB. Presently, there are ∼80 000 structures in the PDB (8074 were deposited in the year 2012 alone), of which ∼70% have been solved by molecular replacement. For successful molecular replacement the model must cover at least 50% ofmore » the total structure and the C{sub α} r.m.s.d. between the core model and the structure to be solved must be less than 2 Å. Here, an approach originally implemented in the CaspR server (http://www.igs.cnrs-mrs.fr/Caspr2/index.cgi) based on homology modelling to search for a molecular-replacement solution is discussed. How the use of as much information as possible from different sources can improve the model(s) is briefly described. The combination of structural information with distantly related sequences is crucial to optimize the multiple alignment that will define the boundaries of the core domains. PDB clusters (sequences with ≥30% identical residues) can also provide information on the eventual changes in conformation and will help to explore the relative orientations assumed by protein subdomains. Normal-mode analysis can also help in generating series of conformational models in the search for a molecular-replacement solution. Of course, finding a correct solution is only the first step and the accuracy of the identified solution is as important as the data quality to proceed through refinement. Here, some possible reasons for failure are discussed and solutions are proposed using a set of successful examples.« less

  9. Structural evolution under uniaxial drawing of Poly(D, L-lactide) Films

    NASA Astrophysics Data System (ADS)

    Stoclet, Grégory; Lefebvre, Jean-Marc; Seguela, Roland

    2009-03-01

    Aliphatic polyesters are an important class of biodegradable polymers. They have drawn particular attention in the last few years as food packaging materials because they can be derived from renewable resources. Among this family, polylactide (PLA) is considered as one of the most promising ``green'' polymer for use as a substitute to petroleum-based polymers. In the present work, we investigate the mechanical behaviour of amorphous poly(D, L-lactide) films in relation to the structural evolution upon stretching at various draw temperatures (Td) above the glass transition temperature. Examination of the drawing behaviour shows that PLA initially behaves like a rubbery material until a true strain of the order of 1. Strain hardening occurs beyond this strain level, up to film fracture. Such strain hardening is generally ascribed to a strain induced crystallization phenomenon. In the present case, it is clearly more pronounced for Td = 90 C than for Td = 70 C. The corresponding structural evolutions are investigated by means of WAXS. The diffraction patterns reveal the marked influence of draw temperature. Indeed for Td = 70 C a mesophase is induced whereas strain-induced crystallisation takes place at Td = 90 C. Further work is in progress, in order to elucidate mesophase development and mechanical response.

  10. X-ray Studies of Regenerated Cellulose Fibers Wet Spun from Cotton Linter Pulp in NaOH/Thiourea Aqueous Solutions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen,X.; Burger, C.; Fang, D.

    Regenerated cellulose fibers were fabricated by dissolution of cotton linter pulp in NaOH (9.5 wt%) and thiourea (4.5 wt%) aqueous solution followed by wet-spinning and multi-roller drawing. The multi-roller drawing process involved three stages: coagulation (I), coagulation (II) and post-treatment (III). The crystalline structure and morphology of regenerated cellulose fiber was investigated by synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) techniques. Results indicated that only the cellulose II crystal structure was found in regenerated cellulose fibers, proving that the cellulose crystals were completely transformed from cellulose I to II structure during spinning from NaOH/thiourea aqueous solution. Themore » crystallinity, orientation and crystal size at each stage were determined from the WAXD analysis. Drawing of cellulose fibers in the coagulation (II) bath (H{sub 2}SO{sub 4}/H{sub 2}O) was found to generate higher orientation and crystallinity than drawing in the post-treatment (III). Although the post-treatment process also increased crystal orientation, it led to a decrease in crystallinity with notable reduction in the anisotropic fraction. Compared with commercial rayon fibers fabricated by the viscose process, the regenerated cellulose fibers exhibited higher crystallinity but lower crystal orientation. SAXS results revealed a clear scattering maximum along the meridian direction in all regenerated cellulose fibers, indicating the formation of lamellar structure during spinning.« less

  11. Assessing sufficient capability: A new approach to economic evaluation.

    PubMed

    Mitchell, Paul Mark; Roberts, Tracy E; Barton, Pelham M; Coast, Joanna

    2015-08-01

    Amartya Sen's capability approach has been discussed widely in the health economics discipline. Although measures have been developed to assess capability in economic evaluation, there has been much less attention paid to the decision rules that might be applied alongside. Here, new methods, drawing on the multidimensional poverty and health economics literature, are developed for conducting economic evaluation within the capability approach and focusing on an objective of achieving "sufficient capability". This objective more closely reflects the concern with equity that pervades the capability approach and the method has the advantage of retaining the longitudinal aspect of estimating outcome that is associated with quality-adjusted life years (QALYs), whilst also drawing on notions of shortfall associated with assessments of poverty. Economic evaluation from this perspective is illustrated in an osteoarthritis patient group undergoing joint replacement, with capability wellbeing assessed using ICECAP-O. Recommendations for taking the sufficient capability approach forward are provided. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Rapid and repeatable fabrication of high A/R silk fibroin microneedles using thermally-drawn micromolds.

    PubMed

    Lee, JiYong; Park, Seung Hyun; Seo, Il Ho; Lee, Kang Ju; Ryu, WonHyoung

    2015-08-01

    Thermal drawing is a versatile rapid prototyping method that can freely form microneedle (MN) structures with ultra-high aspect ratio without relying on any complex and expensive process. However, it is still challenging to repeatedly produce MNs with identical shapes using this thermal drawing due to small fluctuations in processing conditions such as temperatures, drawing speeds, drawing heights, or parallelism in the drawing setup. In addition, thermal drawing is only applicable to thermoplastic materials and most natural biomaterials are incompatible with this method. Thus, we propose use of thermal drawing to fabricate master molds with high aspect ratios and replicate the shape by micromolding. In this work, high A/R MNs with various body profiles were fabricated by thermal drawing and replicated to silk fibroin (SF) MNs multiple times using micromolding. The original MN shape was precisely copied to the SF MNs. Methanol treatment enhanced the mechanical strength of SF MNs up to about 113% more depending on the treatment duration. We also demonstrated that methanol exposure time could effectively control drug release rates from SF MNs. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Assessment of nerve involvement in the lumbar spine: agreement between magnetic resonance imaging, physical examination and pain drawing findings

    PubMed Central

    2010-01-01

    Background Detection of nerve involvement originating in the spine is a primary concern in the assessment of spine symptoms. Magnetic resonance imaging (MRI) has become the diagnostic method of choice for this detection. However, the agreement between MRI and other diagnostic methods for detecting nerve involvement has not been fully evaluated. The aim of this diagnostic study was to evaluate the agreement between nerve involvement visible in MRI and findings of nerve involvement detected in a structured physical examination and a simplified pain drawing. Methods Sixty-one consecutive patients referred for MRI of the lumbar spine were - without knowledge of MRI findings - assessed for nerve involvement with a simplified pain drawing and a structured physical examination. Agreement between findings was calculated as overall agreement, the p value for McNemar's exact test, specificity, sensitivity, and positive and negative predictive values. Results MRI-visible nerve involvement was significantly less common than, and showed weak agreement with, physical examination and pain drawing findings of nerve involvement in corresponding body segments. In spine segment L4-5, where most findings of nerve involvement were detected, the mean sensitivity of MRI-visible nerve involvement to a positive neurological test in the physical examination ranged from 16-37%. The mean specificity of MRI-visible nerve involvement in the same segment ranged from 61-77%. Positive and negative predictive values of MRI-visible nerve involvement in segment L4-5 ranged from 22-78% and 28-56% respectively. Conclusion In patients with long-standing nerve root symptoms referred for lumbar MRI, MRI-visible nerve involvement significantly underestimates the presence of nerve involvement detected by a physical examination and a pain drawing. A structured physical examination and a simplified pain drawing may reveal that many patients with "MRI-invisible" lumbar symptoms need treatment aimed at nerve involvement. Factors other than present MRI-visible nerve involvement may be responsible for findings of nerve involvement in the physical examination and the pain drawing. PMID:20831785

  14. Unpacking Ideologies of Linguistic Purism: How Dual Language Teachers Make Sense of Everyday Translanguaging

    ERIC Educational Resources Information Center

    Martínez, Ramón Antonio; Hikida, Michiko; Durán, Leah

    2015-01-01

    This article draws on qualitative data from two Spanish-English dual language elementary classrooms to explore how teachers in these classrooms made sense of the everyday practice of bilingualism. Methodologically, this study relied on participant observation, video recording, and semi-structured interviews. Conceptually, this article draws on the…

  15. 25. Photocopy of engineering drawing. NEW WHITE ROOM AND MULTISOLIDS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. Photocopy of engineering drawing. NEW WHITE ROOM AND MULTISOLIDS MODS FOR STRETCHED TANK DELTA LAUNCH COMPLEX 17-A, PAD AREA: PLAN-RAIL BEAMS AND HURRICANE ANCHOR FOUNDATIONS, STRUCTURAL, APRIL 1972. - Cape Canaveral Air Station, Launch Complex 17, Facility 28416, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  16. Under Your Skin

    ERIC Educational Resources Information Center

    Corsino, Janet

    2012-01-01

    A traditional understanding in art is that, in order to draw the human figure, the artist must first understand its structure and inner workings. This project was first developed for middle-school art students in an attempt to help them better understand figure drawing. In subsequent years, it has been amended and adapted to integrate with other…

  17. [T-MADE, a transcultural method of "listening" to a child's drawing].

    PubMed

    Rizzi, Alice Titia

    2016-01-01

    T-MADE is an original method for analysing children's drawings, structured around two dimensions: the category of the content and that of the valences. This method is profoundly cross-cultural. It meets the clinical, epistemological and ontological need to mix language and worlds. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  18. Bury my Face in Casting Plaster

    ERIC Educational Resources Information Center

    Judnick, Don

    1976-01-01

    As part of an introductory course in figure drawing, art students spent some time doing portrait studies and profile drawings. When the teacher threw in an ancedote on life masks, it had a double impact. Students learned to better understand underlying bone structure and facial planes and to create a new art product. (Author/RK)

  19. Drawing the line in clinical treatment of companion animals: recommendations from an ethics working party.

    PubMed

    Grimm, Herwig; Bergadano, Alessandra; Musk, Gabrielle C; Otto, Klaus; Taylor, Polly M; Duncan, Juliet Clare

    2018-06-09

    Modern veterinary medicine offers numerous options for treatment and clinicians must decide on the best one to use. Interventions causing short-term harm but ultimately benefitting the animal are often justified as being in the animal's best interest. Highly invasive clinical veterinary procedures with high morbidity and low success rates may not be in the animal's best interest. A working party was set up by the European College of Veterinary Anaesthesia and Analgesia to discuss the ethics of clinical veterinary practice and improve the approach to ethically challenging clinical cases. Relevant literature was reviewed. The 'best interest principle' was translated into norms immanent to the clinic by means of the 'open question argument'. Clinical interventions with potential to cause harm need ethical justification, and suggest a comparable structure of ethical reflection to that used in the context of in vivo research should be applied to the clinical setting. To structure the ethical debate, pertinent questions for ethical decision-making were identified. These were incorporated into a prototype ethical tool developed to facilitate clinical ethical decision-making. The ethical question 'Where should the line on treatment be drawn' should be replaced by 'How should the line be drawn?' © British Veterinary Association (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  20. School-age children's fears, anxiety, and human figure drawings.

    PubMed

    Carroll, M K; Ryan-Wenger, N A

    1999-01-01

    The purpose of this study was to identify the fears of school-age children and determine the relationship between fear and anxiety. A descriptive, correlational, secondary analysis study was conducted using a convenience sample of 90 children between the ages of 8 and 12 years. Each child was instructed to complete the Revised Children's Anxiety Scale and then answer questions from a structured interview. On completion, each child was instructed to draw a human figure drawing. Frequency charts and correlational statistics were used to analyze the data. Findings indicated that the most significant fears of the boys were in the categories of animals, safety, school, and supernatural phenomena, whereas girls were more fearful of natural phenomena. High correlations existed between anxiety scores and the number of fears and emotional indicators on human figure drawings. Because human figure drawings are reliable tools for assessing anxiety and fears in children, practitioners should incorporate these drawings as part of their routine assessments of fearful children.

  1. Methods for treating a liquid using draw solutions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wilson, Aaron D; Orme, Christopher J.

    Draw solutions comprising at least one N-cyclicalkyl-cycloalkylamine and a secondary solvent. The N-cyclicalkyl-cycloalkylamine comprises the chemical structure: ##STR00001## wherein n is 0, 1, or 2, n' is 0, 1, or 2, and each of R.sup.1-R.sup.6 is independently selected from the group consisting of an alkyl group, an alkoxy group, an acetyl group, an aryl group, a hydrogen group, a hydroxyl group, and a phosphorus-containing group. Methods of treating a liquid using the draw solution are also disclosed.

  2. Structure and Mechanics

    NASA Technical Reports Server (NTRS)

    Sanger, George

    1991-01-01

    Artemis is a Common Lunar Lander (CLL) design for the Space Exploration Initiative (SEI). Structure factors for the CLL's primary and secondary structures are listed in tabular form. Additionally, engineering drawings of various systems, including the propulsion and landing systems, are presented.

  3. 77 FR 3242 - Comprehensive Centers Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-23

    ... believe the centers must focus on helping SEAs (1) create sustainable organizational structures and... organizational structures and effective performance management systems, building staff expertise within those... for evaluating and continuously improving organizational structures and processes; c. Draws on the...

  4. Short-term outcome of 1,465 computer-navigated primary total knee replacements 2005–2008

    PubMed Central

    2011-01-01

    Background and purpose Improvement of positioning and alignment by the use of computer-assisted surgery (CAS) might improve longevity and function in total knee replacements, but there is little evidence. In this study, we evaluated the short-term results of computer-navigated knee replacements based on data from the Norwegian Arthroplasty Register. Patients and methods Primary total knee replacements without patella resurfacing, reported to the Norwegian Arthroplasty Register during the years 2005–2008, were evaluated. The 5 most common implants and the 3 most common navigation systems were selected. Cemented, uncemented, and hybrid knees were included. With the risk of revision for any cause as the primary endpoint and intraoperative complications and operating time as secondary outcomes, 1,465 computer-navigated knee replacements (CAS) and 8,214 conventionally operated knee replacements (CON) were compared. Kaplan-Meier survival analysis and Cox regression analysis with adjustment for age, sex, prosthesis brand, fixation method, previous knee surgery, preoperative diagnosis, and ASA category were used. Results Kaplan-Meier estimated survival at 2 years was 98% (95% CI: 97.5–98.3) in the CON group and 96% (95% CI: 95.0–97.8) in the CAS group. The adjusted Cox regression analysis showed a higher risk of revision in the CAS group (RR = 1.7, 95% CI: 1.1–2.5; p = 0.02). The LCS Complete knee had a higher risk of revision with CAS than with CON (RR = 2.1, 95% CI: 1.3–3.4; p = 0.004)). The differences were not statistically significant for the other prosthesis brands. Mean operating time was 15 min longer in the CAS group. Interpretation With the introduction of computer-navigated knee replacement surgery in Norway, the short-term risk of revision has increased for computer-navigated replacement with the LCS Complete. The mechanisms of failure of these implantations should be explored in greater depth, and in this study we have not been able to draw conclusions regarding causation. PMID:21504309

  5. Structural Evaluation of the RSRM Nozzle Replacement Adhesive

    NASA Technical Reports Server (NTRS)

    Batista-Rodriguez, A.; McLennan, M. L.; Palumbos, A. V.; Richardson, D. E.

    1999-01-01

    This paper describes the structural performance evaluation of a replacement adhesive for the Reusable Solid Rocket Motor (RSRM) nozzle utilizing finite element analysis. Due to material obsolescence and industrial safety issues, the two current structural adhesives, EA 913 and EA 946 are to be replaced with a new adhesive. TIGA 321. The structural evaluation in support of the adhesive replacement effort includes residual stress, transportation, and flight analyses. Factors of safety are calculated using the stress response from each analysis. The factors of safety are used as the limiting criteria to compare the replacement adhesive against the current adhesives. Included in this paper are the analytical approach, assumptions and modeling techniques as well as the results of the evaluation. An important factor to the evaluation is the similarity in constitutive material properties (elastic modulus and Poisson's ratio) between TIGA 321 and EA 913. This similarity leads to equivalent material response from the two adhesives. However, TIGA 321 surpasses EA 913's performance due to higher material capabilities. Conversely, the change in stress response from EA 946 to TIGA 321 is more apparent: this is primarily attributed to the difference in the modulii of the two adhesives, which differ by two orders of magnitude. The results of the bondline evaluation indicate that the replacement adhesive provides superior performance than the current adhesives with only minor exceptions. Furthermore, TIGA 321 causes only a minor chance in the response of the phenolic and metal components.

  6. Analyzing Tibetan Monastics Conception of Universe Through Their Drawings

    NASA Astrophysics Data System (ADS)

    Sonam, Tenzin; Chris Impey

    2016-06-01

    Every culture and tradition has their own representation of the universe that continues to evolve through new technologies and discoveries, and as a result of cultural exchange. With the recent introduction of Western science into the Tibetan Buddhist monasteries in India, this study explores the monastics’ conception of the universe prior to their formal instruction in science. Their drawings were analyzed using Tversky’s three criteria for drawing analysis namely—segmentation, order, and hierarchical structure of knowledge. Among the sixty Buddhist monastics included in this study, we find that most of them draw a geocentric model of the universe with the Solar System as the dominant physical system, reflecting little influence of modern astronomical knowledge. A few monastics draw the traditional Buddhist model of the world. The implications of the monastics' representation of the universe for their assimilation of modern science is discussed.

  7. Self-supporting method; an alternative method for steel truss bridge element replacement

    NASA Astrophysics Data System (ADS)

    Arsyad, Muhammad; Sangadji, Senot; As'ad, Sholihin

    2017-11-01

    Steel truss bridge often requires replacement of its element due to serious damage caused by traffic accidents. This replacement is carried out using temporary supporting structure. It would be difficult when the available space for the temporary structure is quite limited and or the position of work is at a high elevation. The self-supporting method is proposed instead of temporary supporting structure. This paper will discuss an innovative method of bridge rehabilitation by utilizing the existing bridge structure. It requires such temporary connecting structure that installed on the existing bridge element, therefore, the forces during replacement process could be transferred to the bridge foundation directly. By taking the case on a steel truss bridge Jetis Salatiga which requires element replacement due to its damages on two main diagonals, a modeling is carried out to get a proper repair method. Structural analysis is conducted for three temporary connecting structure models: “I,” “V,” and triangular model. Stresses and translations that occur in the structure are used as constraints. Bridge bearings are modeled in two different modes: fixed-fixed system and fixed-free one. Temperature load is given in each condition to obtain the appropriate time for execution. The triangular model is chosen as the best one. In the fixed-fixed mode, this method can be carried out in a temperature range 27-28.8° C, while in fixed-free one, the temperature it is allowed between 27-43.4 °C. The D4 is dismantled first by cutting the D4 leaving an area of 1140.2 mm2 or 127 mm web length to enable plastic condition until the D4 collapses. At the beginning of elongation occurs, immediately performed a slowly jacking on a temporary connecting structure so that the force on D4 is gradually transferred to the temporary connecting structure then the D4 and D5 are set in their place.

  8. Learning in Physics by Doing Laboratory Work: Towards a New Conceptual Framework

    ERIC Educational Resources Information Center

    Danielsson, Anna Teresia; Linder, Cedric

    2009-01-01

    Drawing on a study that explores university students' experiences of doing laboratory work in physics, this article outlines a proposed conceptual framework for extending the exploration of the gendered experience of learning. In this framework situated cognition and post-structural gender theory are merged together. By drawing on data that aim at…

  9. Creative Imagination Is Stable across Technological Media: The Spore Creature Creator versus Pencil and Paper

    ERIC Educational Resources Information Center

    Cockbain, Jessica; Vertolli, Michael O.; Davies, Jim

    2014-01-01

    T. B. Ward (1994) investigated creativity by asking participants to draw alien creatures that they imagined to be from a planet very different from Earth. He found that participant drawings reliably contained features typical of common Earth animals. As a consequence, Ward concluded that creativity is structured. The present investigation predicts…

  10. Relative Heights of Males and Females in Children's Drawings.

    ERIC Educational Resources Information Center

    Cox, Maureen V.; Wright, Rebekah

    2000-01-01

    Examined in two studies the height of male and female figures in 5- and 7-year-olds' drawings. Found that adult figures were drawn taller than child figures. For boys, mean male and female heights were approximately the same. Girls drew females taller than males because more girls used different structures such as incorporating a skirt or trousers…

  11. The Relationship between Basic Skills and Operational Effectiveness in the British Army

    ERIC Educational Resources Information Center

    Swain, Jon

    2015-01-01

    This paper draws on data that formed part of a major three-year longitudinal study (2008-2011), which set out to investigate basic skills (BS) provision and needs in the British army and its relationship to operational effectiveness. Using mixed methods, the findings draw on qualitative data from 60 semi-structured interviews with 26 young…

  12. 7. FLOOR PLAN, PLOT PLAN, ELEVATIONS, SHEET NO. 11044/1 OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. FLOOR PLAN, PLOT PLAN, ELEVATIONS, SHEET NO. 1-10-44/1 OF 11. (NOTE: BUILDINGS 821-823 WERE CONSTRUCTED FROM A SINGLE SET OF PLANS. SOME DRAWINGS ARE TYPICAL OF ALL 3 STRUCTURES, CERTAIN OTHER DRAWINGS IN THE SAME SET ARE BUILDING-SPECIFIC.) - Oakland Army Base, Storehouse Type, Ukraine & Maritime Streets, Oakland, Alameda County, CA

  13. User's manual for MacPASCO

    NASA Technical Reports Server (NTRS)

    Lucas, S. H.; Davis, R. C.

    1992-01-01

    A user's manual is presented for MacPASCO, which is an interactive, graphic, preprocessor for panel design. MacPASCO creates input for PASCO, an existing computer code for structural analysis and sizing of longitudinally stiffened composite panels. MacPASCO provides a graphical user interface which simplifies the specification of panel geometry and reduces user input errors. The user draws the initial structural geometry and reduces user input errors. The user draws the initial structural geometry on the computer screen, then uses a combination of graphic and text inputs to: refine the structural geometry; specify information required for analysis such as panel load and boundary conditions; and define design variables and constraints for minimum mass optimization. Only the use of MacPASCO is described, since the use of PASCO has been documented elsewhere.

  14. Reproducing Italians: contested biopolitics in the age of 'replacement anxiety'.

    PubMed

    Marchesi, Milena

    2012-01-01

    In national and international discourses, Italians are often represented as a greying population failing to reproduce itself. Italian women are targeted for their very low birth rates, while migrant women are scrutinized for their 'excessive' fertility and abortion rates. These demographic concerns over differential reproduction reflect 'replacement anxiety' about the below-replacement rates of Italians and the replacement of Italians by immigrants. Demographic anxieties coalesce with the intensifying of Catholic 'vitapolitics' manifesting in the paradox of pro-natalist interventions coexisting with the curtailment of fertility-enhancing reproductive technologies. The children of migrants emerge in some population discourses as a threat rather than a contribution to the reproduction of the nation. Drawing on multi-sited ethnographic research in Milan, this paper examines how reproduction in contemporary Italy has emerged as a contested social, political, and moral issue that invests Italian and migrant women in different ways, engendering different forms and terms of resistance and contestation. On what terms are subjects governed and called upon to govern themselves to be more 'rational' and 'responsible' reproducers of the nation? What subjectivities and local responses are engendered by the politics of reproduction in Italy? As different rationalities and notions of responsible reproduction circulate, ethnographic research sheds light on how anxieties over low birth rates are reappropriated and redeployed against the state, suggesting that subjects are not so easily governable by population and reproductive discourses. This research contributes to the literature on critical demography and the politics of reproduction and migration in the new Europe.

  15. Biomimicry of surfactant protein C

    PubMed Central

    Brown, Nathan J.; Johansson, Jan; Barron, Annelise E.

    2012-01-01

    CONSPECTUS Since the widespread use of exogenous lung surfactant to treat neonatal respiratory distress syndrome, premature infant survival and respiratory morbidity have dramatically improved. Despite the effectiveness of the animal-derived surfactant preparations, there still remain some concerns and difficulties associated with their use. This has prompted investigation into the creation of synthetic surfactant preparations. However, to date, no clinically used synthetic formulation is as effective as the natural material. This is largely because the previous synthetic formulations lacked analogues of the hydrophobic proteins of the lung surfactant system, SP-B and SP-C, which are critical functional constituents. As a result, recent investigation has turned towards the development of a new generation of synthetic, biomimetic surfactants that contain synthetic phospholipids along with a mimic of the hydrophobic protein portion of lung surfactant. In this Account, we detail our efforts in creating accurate mimics of SP-C for use in a synthetic surfactant replacement therapy. Despite SP-C’s seemingly simple structure, the predominantly helical protein is extraordinarily challenging to work with given its extreme hydrophobicity and structural instability, which greatly complicates the creation of an effective SP-C analogue. Drawing inspiration from Nature, two promising biomimetic approaches have led to the creation of rationally designed biopolymers that recapitulate many of SP-C’s molecular features. The first approach utilizes detailed SP-C structure-activity relationships and amino acid folding propensities to create a peptide-based analogue, SP-C33. In SP-C33, the problematic and metastable poly-valine helix is replaced with a structurally stable, poly-leucine helix and includes a well placed positive charge to prevent aggregation. SP-C33 is both structurally stable and eliminates the association propensity of the native protein. The second approach follows the same design considerations, but makes use of a non-natural, poly-N-substituted glycine or “peptoid” scaffold to circumvent the difficulties associated with SP-C. By incorporating unique, biomimetic side chains in a non-natural backbone, the peptoid mimic captures both SP-C’s hydrophobic patterning and helical secondary structure. Despite the differences in structure, both SP-C33 and the SP-C peptoid mimic capture many requisite features of SP-C. In a surfactant environment, these analogues also replicate many of the key surface activities necessary for a functional biomimetic surfactant therapy while overcoming the difficulties associated with the natural protein. With improved stability, greater production potential, and elimination of possible pathogenic contamination, these biomimetic surfactant formulations offer the potential not only to improve the treatment of respiratory distress syndrome, but also the opportunity to treat other respiratory-related disorders. PMID:18834153

  16. Space Shuttle Projects

    NASA Image and Video Library

    1988-01-01

    This artist's concept drawing depicts the Tracking and Data Relay Satellite-C (TDRS-C), which was the primary payload of the Space Shuttle Discovery on the STS-26 mission, launched on September 29, 1988. The TDRS system provides almost uninterrupted communications with Earth-orbiting Shuttles and satellites, and had replaced the intermittent coverage provided by globe-encircling ground tracking stations used during the early space program. The TDRS can transmit and receive data, and track a user spacecraft in a low Earth orbit. The deployment of TDRS-G on the STS-70 mission being the latest in the series, NASA has successfully launched six TDRSs.

  17. Can soda ash dumping grounds provide replacement habitats for digger wasps (Hymenoptera, Apoidea, Spheciformes)?

    PubMed

    Twerd, Lucyna; Krzyżyński, Maciej; Waldon-Rudzionek, Barbara; Olszewski, Piotr

    2017-01-01

    Published sources document a loss of biodiversity at an extreme rate, mainly because natural and semi-natural ecosystems are becoming fragmented and isolated, thus losing their biological functions. These changes significantly influence biological diversity, which is a complex phenomenon that changes over time. Contemporary ecologists must therefore draw attention to anthropogenic replacement habitats and increase their conservation status. In our studies we show the positive role of soda ash dumping grounds as an alternative habitat for digger wasps, especially the thermophilic species. In the years 2007-2010 we carried out investigations in postindustrial soda ash dumping grounds located in Central Poland. We demonstrated that these areas serve as replacement habitats for thermophilic species of Spheciformes and, indirectly, for their potential prey. The studies were conducted in three microhabitat types, varying in soil moisture, salinity and alkalinity, that were changing in the course of ecological succession. We trapped 2571 specimens belonging to 64 species of digger wasps. Species typical of open sunny spaces comprised 73% of the whole inventory. The obtained results suggest that the stage of succession determines the richness, abundance and diversity of Spheciformes. The most favorable conditions for digger wasps were observed in habitats at late successional stages. Our results clearly showed that these habitats were replacement habitats for thermophilous Spheciformes, including rare taxa that require genetic, species and ecosystem protection, according to the Biodiversity Convention. We showed that some types of industry might play a positive role in the preservation of taxa in the landscape, and that even degraded industrial wasteland can replace habitats under anthropopressure, serving as refugia of biological diversity, especially for disturbance-dependent species.

  18. Can soda ash dumping grounds provide replacement habitats for digger wasps (Hymenoptera, Apoidea, Spheciformes)?

    PubMed Central

    Twerd, Lucyna; Krzyżyński, Maciej; Waldon-Rudzionek, Barbara; Olszewski, Piotr

    2017-01-01

    Background Published sources document a loss of biodiversity at an extreme rate, mainly because natural and semi-natural ecosystems are becoming fragmented and isolated, thus losing their biological functions. These changes significantly influence biological diversity, which is a complex phenomenon that changes over time. Contemporary ecologists must therefore draw attention to anthropogenic replacement habitats and increase their conservation status. In our studies we show the positive role of soda ash dumping grounds as an alternative habitat for digger wasps, especially the thermophilic species. Methodology/Principal findings In the years 2007–2010 we carried out investigations in postindustrial soda ash dumping grounds located in Central Poland. We demonstrated that these areas serve as replacement habitats for thermophilic species of Spheciformes and, indirectly, for their potential prey. The studies were conducted in three microhabitat types, varying in soil moisture, salinity and alkalinity, that were changing in the course of ecological succession. We trapped 2571 specimens belonging to 64 species of digger wasps. Species typical of open sunny spaces comprised 73% of the whole inventory. The obtained results suggest that the stage of succession determines the richness, abundance and diversity of Spheciformes. The most favorable conditions for digger wasps were observed in habitats at late successional stages. Conclusions/Significance Our results clearly showed that these habitats were replacement habitats for thermophilous Spheciformes, including rare taxa that require genetic, species and ecosystem protection, according to the Biodiversity Convention. We showed that some types of industry might play a positive role in the preservation of taxa in the landscape, and that even degraded industrial wasteland can replace habitats under anthropopressure, serving as refugia of biological diversity, especially for disturbance-dependent species. PMID:28423033

  19. Drawing the PDB: Protein-Ligand Complexes in Two Dimensions.

    PubMed

    Stierand, Katrin; Rarey, Matthias

    2010-12-09

    The two-dimensional representation of molecules is a popular communication medium in chemistry and the associated scientific fields. Computational methods for drawing small molecules with and without manual investigation are well-established and widely spread in terms of numerous software tools. Concerning the planar depiction of molecular complexes, there is considerably less choice. We developed the software PoseView, which automatically generates two-dimensional diagrams of macromolecular complexes, showing the ligand, the interactions, and the interacting residues. All depicted molecules are drawn on an atomic level as structure diagrams; thus, the output plots are clearly structured and easily readable for the scientist. We tested the performance of PoseView in a large-scale application on nearly all druglike complexes of the PDB (approximately 200000 complexes); for more than 92% of the complexes considered for drawing, a layout could be computed. In the following, we will present the results of this application study.

  20. Politics of love: narrative structures, intertextuality and social agency in the narratives of parents with disabled children.

    PubMed

    Hanisch, Halvor

    2013-11-01

    Recent research has highlighted how parental narratives can be important in the resistance against disabling processes. This article contains analyses of enabling language in narratives published by Scandinavian disability rights organizations. First, drawing on the work of Fisher and Goodley, I point out that the material constitute a threefold: normality narratives, resistance narratives, and narratives that demonstrate an appreciation of the present and the child's individual alterity. Second, I demonstrate that the last narrative draws on Romanticism rather than linguistic resources from disability culture. Third, I show that these narratives are hyperboles - texts that strengthen and emphasise the valuation to the point where the narrative structure transcends narrative consistency. Fourth, drawing on the work of Kristeva, I argue that this form of narration constitutes an intimate politics of love. © 2013 The Author. Sociology of Health & Illness © 2013 Foundation for the Sociology of Health & Illness/John Wiley & Sons Ltd.

  1. A fragmentation and reassembly method for ab initio phasing.

    PubMed

    Shrestha, Rojan; Zhang, Kam Y J

    2015-02-01

    Ab initio phasing with de novo models has become a viable approach for structural solution from protein crystallographic diffraction data. This approach takes advantage of the known protein sequence information, predicts de novo models and uses them for structure determination by molecular replacement. However, even the current state-of-the-art de novo modelling method has a limit as to the accuracy of the model predicted, which is sometimes insufficient to be used as a template for successful molecular replacement. A fragment-assembly phasing method has been developed that starts from an ensemble of low-accuracy de novo models, disassembles them into fragments, places them independently in the crystallographic unit cell by molecular replacement and then reassembles them into a whole structure that can provide sufficient phase information to enable complete structure determination by automated model building. Tests on ten protein targets showed that the method could solve structures for eight of these targets, although the predicted de novo models cannot be used as templates for successful molecular replacement since the best model for each target is on average more than 4.0 Å away from the native structure. The method has extended the applicability of the ab initio phasing by de novo models approach. The method can be used to solve structures when the best de novo models are still of low accuracy.

  2. Web-Based, Pictograph-Formatted Discharge Instructions for Low-Literacy Older Adults After Hip Replacement Surgery: Findings of End-User Evaluation of the Website.

    PubMed

    Choi, Jeungok; Jacelon, Cynthia S; Kalmakis, Karen A

    The purpose of this study was to develop web-based, pictograph-formatted discharge instructions and evaluate the website with intended users to maximize the relevance and clarity of the website. A descriptive study. Low-literacy text and 45 sets of pictographs were implemented in web-based instructions. The content, design, function, and navigation of the website were reviewed by 15 low-literate older adults following hip replacement surgery. Participants observed that the simple line drawings with clear background were well suited to web pages and helped to convey the points made. They also suggested changes such as adding an additional alphabetical index menu to enhance easy navigation and removing hypertext links to avoid distraction. Web-based, pictograph-formatted discharge instructions were well received by low-literate older adults, who perceived the website easy to use and understand. A pictograph-formatted approach may provide effective strategies to promote understanding of lengthy, complex action-based discharge instructions in rehabilitation facilities.

  3. The application of artificial intelligent techniques to accelerator operations at McMaster University

    NASA Astrophysics Data System (ADS)

    Poehlman, W. F. S.; Garland, Wm. J.; Stark, J. W.

    1993-06-01

    In an era of downsizing and a limited pool of skilled accelerator personnel from which to draw replacements for an aging workforce, the impetus to integrate intelligent computer automation into the accelerator operator's repertoire is strong. However, successful deployment of an "Operator's Companion" is not trivial. Both graphical and human factors need to be recognized as critical areas that require extra care when formulating the Companion. They include interactive graphical user's interface that mimics, for the operator, familiar accelerator controls; knowledge of acquisition phases during development must acknowledge the expert's mental model of machine operation; and automated operations must be seen as improvements to the operator's environment rather than threats of ultimate replacement. Experiences with the PACES Accelerator Operator Companion developed at two sites over the past three years are related and graphical examples are given. The scale of the work involves multi-computer control of various start-up/shutdown and tuning procedures for Model FN and KN Van de Graaff accelerators. The response from licensing agencies has been encouraging.

  4. Collagen Gly missense mutations: Effect of residue identity on collagen structure and integrin binding.

    PubMed

    Qiu, Yimin; Mekkat, Arya; Yu, Hongtao; Yigit, Sezin; Hamaia, Samir; Farndale, Richard W; Kaplan, David L; Lin, Yu-Shan; Brodsky, Barbara

    2018-05-11

    Gly missense mutations in type I collagen, which replace a conserved Gly in the repeating (Gly-Xaa-Yaa) n sequence with a larger residue, are known to cause Osteogenesis Imperfecta (OI). The clinical consequences of such mutations range from mild to lethal, with more serious clinical severity associated with larger Gly replacement residues. Here, we investigate the influence of the identity of the residue replacing Gly within and adjacent to the integrin binding 502 GFPGER 507 sequence on triple-helix structure, stability and integrin binding using a recombinant bacterial collagen system. Recombinant collagens were constructed with Gly substituted by Ala, Ser or Val at four positions within the integrin binding region. All constructs formed a stable triple-helix structure with a small decrease in melting temperature. Trypsin was used to probe local disruption of the triple helix, and Gly to Val replacements made the triple helix trypsin sensitive at three of the four sites. Any mutation at Gly505, eliminated integrin binding, while decreased integrin binding affinity was observed in the replacement of Gly residues at Gly502 following the order Val > Ser > Ala. Molecular dynamics simulations indicated that all Gly replacements led to transient disruption of triple-helix interchain hydrogen bonds in the region of the Gly replacement. These computational and experimental results lend insight into the complex molecular basis of the varying clinical severity of OI. Copyright © 2018. Published by Elsevier Inc.

  5. Inexplicable or Simply Unexplained? The Management of Maize Seed in Mexico

    PubMed Central

    Dyer, George A.; López-Feldman, Alejandro

    2013-01-01

    Farmer management of plant germplasm pre-dates crop domestication, but humans’ role in crop evolution and diversity remains largely undocumented and often contested. Seemingly inexplicable practices observed throughout agricultural history, such as exchanging or replacing seed, continue to structure crop populations across the developing world. Seed management practices can be construed as events in the life history of crops and management data used to model crop demography, but this requires suitable quantitative data. As a prerequisite to addressing the causes and implications of maize seed management, we describe its patterns of variation across Mexico by drawing from the literature and new analysis. We find that rates of seed replacement, introduction and diffusion differ significantly across regions and altitudinal zones, but interactions among explanatory factors can obscure patterns of variation. The type, source, geographic origin and ownership of seed help explain observed rates. Yet, controlling for the characteristics of germplasm barely reduces interregional differences vastly exceeding variation across elevations. With few exceptions, monotonic altitudinal trends are absent. Causal relationships between management practices and the physical environment could determine farmers’ wellbeing and crop conservation in the face of climate change. Scarce and inconsistent data on management nevertheless could prevent an understanding of these relationships. Current conceptions on the management and dynamics of maize diversity are founded on a patchwork of observations in surprisingly few and dissimilar environments. Our estimates of management practices should shed light on differences in maize population dynamics across Mexico. Consistency with previous studies spanning over a decade suggests that common sets of forces are present within large areas, but causal associations remain unknown. The next step in explaining crop diversity should address variation in seed management across space and time simultaneously while identifying farmers’ values and motivations as underlying forces. PMID:23840847

  6. Inexplicable or simply unexplained? The management of maize seed in Mexico.

    PubMed

    Dyer, George A; López-Feldman, Alejandro

    2013-01-01

    Farmer management of plant germplasm pre-dates crop domestication, but humans' role in crop evolution and diversity remains largely undocumented and often contested. Seemingly inexplicable practices observed throughout agricultural history, such as exchanging or replacing seed, continue to structure crop populations across the developing world. Seed management practices can be construed as events in the life history of crops and management data used to model crop demography, but this requires suitable quantitative data. As a prerequisite to addressing the causes and implications of maize seed management, we describe its patterns of variation across Mexico by drawing from the literature and new analysis. We find that rates of seed replacement, introduction and diffusion differ significantly across regions and altitudinal zones, but interactions among explanatory factors can obscure patterns of variation. The type, source, geographic origin and ownership of seed help explain observed rates. Yet, controlling for the characteristics of germplasm barely reduces interregional differences vastly exceeding variation across elevations. With few exceptions, monotonic altitudinal trends are absent. Causal relationships between management practices and the physical environment could determine farmers' wellbeing and crop conservation in the face of climate change. Scarce and inconsistent data on management nevertheless could prevent an understanding of these relationships. Current conceptions on the management and dynamics of maize diversity are founded on a patchwork of observations in surprisingly few and dissimilar environments. Our estimates of management practices should shed light on differences in maize population dynamics across Mexico. Consistency with previous studies spanning over a decade suggests that common sets of forces are present within large areas, but causal associations remain unknown. The next step in explaining crop diversity should address variation in seed management across space and time simultaneously while identifying farmers' values and motivations as underlying forces.

  7. 24 CFR 3282.12 - Excluded structures-modular homes.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... is designed only for erection or installation on a site-built permanent foundation; (i) A structure... structure, including but not limited to designs, drawings, and installation or erection instructions...) Capable of transferring all design loads imposed by or upon the structure into soil or bedrock without...

  8. 24 CFR 3282.12 - Excluded structures-modular homes.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... is designed only for erection or installation on a site-built permanent foundation; (i) A structure... structure, including but not limited to designs, drawings, and installation or erection instructions...) Capable of transferring all design loads imposed by or upon the structure into soil or bedrock without...

  9. 24 CFR 3282.12 - Excluded structures-modular homes.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... is designed only for erection or installation on a site-built permanent foundation; (i) A structure... structure, including but not limited to designs, drawings, and installation or erection instructions...) Capable of transferring all design loads imposed by or upon the structure into soil or bedrock without...

  10. Discovery of novel anti-HIV agents via Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) click chemistry-based approach.

    PubMed

    Gao, Ping; Sun, Lin; Zhou, Junsu; Li, Xiao; Zhan, Peng; Liu, Xinyong

    2016-09-01

    In recent years, a variety of new synthetic methodologies and concepts have been proposed in the search for new pharmaceutical lead structures and optimization. Notably, the Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) click chemistry approach has drawn great attention and has become a powerful tool for the generation of privileged medicinal skeletons in the discovery of anti-HIV agents. This is due to the high degree of reliability, complete specificity (chemoselectivity and regioselectivity), mild conditions, and the biocompatibility of the reactants. Herein, the authors describe the progress thus far on the discovery of novel anti-HIV agents via the CuAAC click chemistry-based approach. CuAAC click chemistry is a proven protocol for synthesizing triazole products which could serve as basic pharmacophores, act as replacements of traditional scaffold or substituent modification, be a linker of dual-target or dual-site inhibitors and more for the discovery of novel anti-HIV agents. What's more, it also provides convenience and feasibility for dynamic combinatorial chemistry and in situ screening. It is envisioned that click chemistry will draw more attention and make more contributions in anti-HIV drug discovery in the future.

  11. On the telescopes in the paintings of Jan Brueghel the Elder

    NASA Astrophysics Data System (ADS)

    Molaro, Paolo; Selvelli, Pierluigi

    2011-06-01

    Several astronomical instruments including early spyglasses are depicted in at least five paintings that Jan Brueghel the Elder completed between 1608 and 1625. This rather unique circumstance is due to the fact that Jan Brueghel was court painter of Archduke Albert VII of Habsburg, whose love for art and science, he celebrated in his paintings. An optical tube that appears in the Extensive Landscape with View of the Castle of Mariemont, dated 1608-1612 represents the first painting of a telescope whatsoever. Some documents are collected showing that Albert VII could have obtained very early spyglasses directly from Lipperhey or Sacharias Janssen, who are two possible inventors of the telescope. Thus the painting could reproduce one of the first telescopes ever made by mankind. Two more instruments appear prominently in two Allegories of Sight made in the years 1617 and 1618. These are precious instruments made possibly in silver, composed by several draw-tubes, which look much more sophisticated than other instruments of same epoch. Rather surprisingly, the structure and, in particular the eyepiece, suggest that they may represent the first examples of Keplerian telescopes about two decades before they replaced the Dutch mounting.

  12. SEURAT: Safety Evaluation Ultimately Replacing Animal Testing--recommendations for future research in the field of predictive toxicology.

    PubMed

    Daston, George; Knight, Derek J; Schwarz, Michael; Gocht, Tilman; Thomas, Russell S; Mahony, Catherine; Whelan, Maurice

    2015-01-01

    The development of non-animal methodology to evaluate the potential for a chemical to cause systemic toxicity is one of the grand challenges of modern science. The European research programme SEURAT is active in this field and will conclude its first phase, SEURAT-1, in December 2015. Drawing on the experience gained in SEURAT-1 and appreciating international advancement in both basic and regulatory science, we reflect here on how SEURAT should evolve and propose that further research and development should be directed along two complementary and interconnecting work streams. The first work stream would focus on developing new 'paradigm' approaches for regulatory science. The goal here is the identification of 'critical biological targets' relevant for toxicity and to test their suitability to be used as anchors for predicting toxicity. The second work stream would focus on integration and application of new approach methods for hazard (and risk) assessment within the current regulatory 'paradigm', aiming for acceptance of animal-free testing strategies by regulatory authorities (i.e. translating scientific achievements into regulation). Components for both work streams are discussed and may provide a structure for a future research programme in the field of predictive toxicology.

  13. Dilemmas of citizenship: young people's conceptions of un/employment rights and responsibilities.

    PubMed

    Gibson, Stephen

    2011-09-01

    This paper draws on the concept of ideological dilemmas in order to explore how a sample of young people constructed potentially contrary themes of liberal citizenship in discussions of un/employment. The study took place in the context of recent policy developments in the UK which have sought to place a renewed emphasis upon notions of responsible citizenship in relation to both welfare and education policy. A total of 58 participants were interviewed in 24 semi-structured group interviews. In response to direct questions on un/employment, participants could resolve dilemmas concerning welfare rights and the responsibility to contribute to society by emphasizing a criterion of effortfulness, thereby adopting a primarily individualistic explanation of unemployment. In other contexts however, this could be replaced by an emphasis on social explanations of unemployment. In particular, participants could treat immigration as a cause of unemployment. These findings are interpreted in terms of people's capacity to construct rhetorical strategies based upon different ideological themes in particular contexts. They are discussed in relation to previous research on social policy discourse and recent debates regarding the appropriateness of seeking to identify ideological themes in discourse. ©2010 The British Psychological Society.

  14. Women's responses to intimate partner violence in Rwanda: Rethinking agency in constrained social contexts.

    PubMed

    Mannell, Jenevieve; Jackson, Sharon; Umutoni, Aline

    2016-01-01

    This paper explores instances of agency in women's responses to intimate partner violence (IPV) in Rwanda. The literature on women's responses to IPV conceptualises agency primarily as an individual's capacity to take action by reporting violence or leaving a relationship, obscuring other ways women may respond to violence in contexts where reporting or leaving are unlikely. We aim to replace this narrow conceptualisation of agency with a social constructivist focus on the meanings women attribute to possible IPV responses. We draw on data from a study of IPV in Rwanda, which includes semi-structured interviews with women experiencing violence and four focus group discussions with women community members (n = 39). Our findings highlight sociocultural, economic, political-legal and historical constraints that shape women's actions in this context. In relation to these constraints, women describe four possible responses to IPV: reporting the violence; seeking emotional support; 'fighting back' against violence; or remaining silent. While reporting and leaving violent relationships are identified, women also discuss the social constraints that make these actions extremely difficult. In designing effective strategies, we conclude that public health strategies need to consider women's understandings of their own actions, particularly in social contexts where certain actions may be constrained.

  15. Structural and Cultural Factors in Successful Aging Among Older Hispanics

    PubMed Central

    Angel, Ronald J.

    2014-01-01

    Successful or healthful aging are terms that draw attention to life course issues related to individual, physical, and psychologic development and maturation, but they also draw attention to the material basis of successful aging and the social structures that determine one’s place in the social hierarchy. This article focuses on barriers to optimal aging for Hispanics, especially those of Mexican origin, and argues that cultural factors and social class are closely associated. The reduction of health disparities and equity in medical and long-term care requires an understanding of both cultural and material sources of differential health levels. PMID:19065093

  16. Boundary-Work in Science Education: A Case Study of GM Food

    ERIC Educational Resources Information Center

    Lin, Yin-Ling

    2016-01-01

    The term "boundary-work" is used to refer to the constant effort to draw and re-draw the boundary of science; it has long been portrayed as constructed by the stakeholders of science to demarcate science from non-science to establish the authority of science. Twenty-nine semi-structured interviews were carried out with students from one…

  17. Formative Assessment: Using Concept Cartoon, Pupils' Drawings, and Group Discussions to Tackle Children's Ideas about Biological Inheritance

    ERIC Educational Resources Information Center

    Chin, Christine; Teou, Lay-Yen

    2010-01-01

    This study was carried out in the context of formative assessment where assessment and learning were integrated to enhance both teaching and learning. The purpose of the study was to: (a) identify pupils' ideas about biological inheritance through the use of a concept cartoon, pupils' drawings and talk, and (b) devise scaffolding structures that…

  18. ADM. Fuel Pump House (TAN611). Elevations, floor plan. Drawing includes ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ADM. Fuel Pump House (TAN-611). Elevations, floor plan. Drawing includes elevation and plans for "H.M." structures (Hose Storage?). Ralph M. Parsons 902-2-ANP-611-A 78 Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 035-0611-00-693-106741 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  19. System for line drawings interpretation

    NASA Astrophysics Data System (ADS)

    Boatto, L.; Consorti, Vincenzo; Del Buono, Monica; Eramo, Vincenzo; Esposito, Alessandra; Melcarne, F.; Meucci, Mario; Mosciatti, M.; Tucci, M.; Morelli, Arturo

    1992-08-01

    This paper describes an automatic system that extracts information from line drawings, in order to feed CAD or GIS systems. The line drawings that we analyze contain interconnected thin lines, dashed lines, text, and symbols. Characters and symbols may overlap with lines. Our approach is based on the properties of the run representation of a binary image that allow giving the image a graph structure. Using this graph structure, several algorithms have been designed to identify, directly in the raster image, straight segments, dashed lines, text, symbols, hatching lines, etc. Straight segments and dashed lines are converted into vectors, with high accuracy and good noise immunity. Characters and symbols are recognized by means of a recognizer, specifically developed for this application, designed to be insensitive to rotation and scaling. Subsequent processing steps include an `intelligent'' search through the graph in order to detect closed polygons, dashed lines, text strings, and other higher-level logical entities, followed by the identification of relationships (adjacency, inclusion, etc.) between them. Relationships are further translated into a formal description of the drawing. The output of the system can be used as input to a Geographic Information System package. The system is currently used by the Italian Land Register Authority to process cadastral maps.

  20. 60. DETAIL VIEW OF TWO STEEL STRUCTURAL COLUMNS THAT REPLACED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    60. DETAIL VIEW OF TWO STEEL STRUCTURAL COLUMNS THAT REPLACED THE ORIGINAL BRICK SUPPORTS FOR THE SOUTHERNMOST ARCH ON THE BUILDING'S W WALL WHEN THE S SECTION OF THE BUILDING WAS 'OPENED-UP' DURING THE SECOND WORLD WAR; LOOKING NW. (Ceronie) - Watervliet Arsenal, Building No. 110, Hagner Road between Schull & Whittemore Roads, Watervliet, Albany County, NY

  1. Translation of an Engineered Nanofibrous Disc-like Angle Ply Structure for Intervertebral Disc Replacement in a Small Animal Model

    PubMed Central

    Martin, John T.; Milby, Andrew H.; Chiaro, Joseph A.; Kim, Dong Hwa; Hebela, Nader M.; Smith, Lachlan J.; Elliott, Dawn M.; Mauck, Robert L.

    2015-01-01

    Intervertebral disc degeneration has been implicated in the etiology of low back pain; however the current surgical strategies for treating symptomatic disc disease are limited. A variety of materials have been developed to replace disc components, including the nucleus pulposus (NP), the annulus fibrosus (AF), and their combination into disc-like engineered constructs. We have previously shown that layers of electrospun poly(ε-caprolactone) scaffold, mimicking the hierarchical organization of the native AF, have functional parity with native tissue. Likewise, we have combined these structures with cell-seeded hydrogels (as an NP replacement) to form disc-like angle ply structures (DAPS). The objective of this study was to develop a model for the evaluation of DAPS in vivo. Through a series of studies, we developed a surgical approach to replace the rat caudal disc with an acellular DAPS and then stabilize the motion segment by external fixation. We then optimized cell infiltration into DAPS by including sacrificial poly(ethylene oxide) layers interspersed throughout the angle-ply structure. Our findings illustrate that DAPS are stable in the caudal spine, are infiltrated by cells from the peri-implant space, and that infiltration is expedited by providing additional routes for cell migration. These findings establish a new in vivo platform in which to evaluate and optimize the design of functional disc replacements. PMID:24560621

  2. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sabin, Charles; Plevka, Pavel, E-mail: pavel.plevka@ceitec.muni.cz

    Molecular replacement and noncrystallographic symmetry averaging were used to detwin a data set affected by perfect hemihedral twinning. The noncrystallographic symmetry averaging of the electron-density map corrected errors in the detwinning introduced by the differences between the molecular-replacement model and the crystallized structure. Hemihedral twinning is a crystal-growth anomaly in which a specimen is composed of two crystal domains that coincide with each other in three dimensions. However, the orientations of the crystal lattices in the two domains differ in a specific way. In diffraction data collected from hemihedrally twinned crystals, each observed intensity contains contributions from both of themore » domains. With perfect hemihedral twinning, the two domains have the same volumes and the observed intensities do not contain sufficient information to detwin the data. Here, the use of molecular replacement and of noncrystallographic symmetry (NCS) averaging to detwin a 2.1 Å resolution data set for Aichi virus 1 affected by perfect hemihedral twinning is described. The NCS averaging enabled the correction of errors in the detwinning introduced by the differences between the molecular-replacement model and the crystallized structure. The procedure permitted the structure to be determined from a molecular-replacement model that had 16% sequence identity and a 1.6 Å r.m.s.d. for C{sup α} atoms in comparison to the crystallized structure. The same approach could be used to solve other data sets affected by perfect hemihedral twinning from crystals with NCS.« less

  3. The cytotoxicity of organobismuth compounds with certain molecular structures can be diminished by replacing the bismuth atom with an antimony atom in the molecules.

    PubMed

    Kohri, Kumiko; Yoshida, Eiko; Yasuike, Shuji; Fujie, Tomoya; Yamamoto, Chika; Kaji, Toshiyuki

    2015-06-01

    Organic-inorganic hybrid molecules, which are composed of an organic structure and metal(s), are indispensable for synthetic chemical reactions; however, their toxicity has been incompletely understood. In the present study, we discovered two cytotoxic organobismuth compounds whose cytotoxicity diminished upon replacement of the intramolecular bismuth atom with an antimony atom. The intracellular accumulation of the organobismuth compounds was much higher than that of the organoantimony compounds with the corresponding organic structures. We also showed that both the organic structure and bismuth atom are required for certain organobismuth compounds to exert their cytotoxic effect, suggesting that the cytotoxicity of such a compound is a result of an interaction between the organic structure and the bismuth atom. The present data suggest that organobismuth compounds with certain molecular structures exhibit cytotoxicity via an interaction between the molecular structure and the bismuth atom, and this cytotoxicity can be diminished by replacing the bismuth atom with an antimony atom, resulting in lower intracellular accumulation.

  4. 77 FR 1406 - Drawbridge Operation Regulations; Northeast Cape Fear River, Wilmington, NC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-10

    ... draw span to facilitate structural, electrical and mechanical upgrades and repairs of the bridge. DATES... structural, electrical and mechanical upgrades and repairs of the bridge. Under the regular operating...

  5. Learning the 3-D structure of objects from 2-D views depends on shape, not format

    PubMed Central

    Tian, Moqian; Yamins, Daniel; Grill-Spector, Kalanit

    2016-01-01

    Humans can learn to recognize new objects just from observing example views. However, it is unknown what structural information enables this learning. To address this question, we manipulated the amount of structural information given to subjects during unsupervised learning by varying the format of the trained views. We then tested how format affected participants' ability to discriminate similar objects across views that were rotated 90° apart. We found that, after training, participants' performance increased and generalized to new views in the same format. Surprisingly, the improvement was similar across line drawings, shape from shading, and shape from shading + stereo even though the latter two formats provide richer depth information compared to line drawings. In contrast, participants' improvement was significantly lower when training used silhouettes, suggesting that silhouettes do not have enough information to generate a robust 3-D structure. To test whether the learned object representations were format-specific or format-invariant, we examined if learning novel objects from example views transfers across formats. We found that learning objects from example line drawings transferred to shape from shading and vice versa. These results have important implications for theories of object recognition because they suggest that (a) learning the 3-D structure of objects does not require rich structural cues during training as long as shape information of internal and external features is provided and (b) learning generates shape-based object representations independent of the training format. PMID:27153196

  6. NEGOTIATING STRUCTURAL VULNERABILITY FOLLOWING REGULATORY CHANGES TO A PROVINCIAL METHADONE PROGRAM IN VANCOUVER, CANADA: A QUALITATIVE STUDY

    PubMed Central

    McNeil, Ryan; Kerr, Thomas; Anderson, Solanna; Maher, Lisa; Keewatin, Chereece; Milloy, MJ; Wood, Evan; Small, Will

    2015-01-01

    While regulatory frameworks governing methadone maintenance therapy (MMT) require highly regimented treatment programs that shape treatment outcomes, little research has examined the effects of regulatory changes to these programs on those receiving treatment, and located their experiences within the wider context of socialstructural inequities. In British Columbia (BC), Canada, provincial regulations governing MMT have recently been modified, including: replacing the existing methadone formulation with Methadose® (pre-mixed and 10 times more concentrated); prohibiting pharmacy delivery of methadone; and, prohibiting pharmacies incentives for methadone dispensation. We undertook this study to examine the impacts of these changes on a structurally vulnerable population enrolled in MMT in Vancouver, BC. Qualitative interviews were conducted with 34 people enrolled in MMT and recruited from two ongoing observational prospective cohort studies comprised of drug-using individuals in the six-month period in 2014 following these regulatory changes. Interview transcripts were analyzed thematically, and by drawing on the concept of ‘structural vulnerability’. Findings underscore how these regulatory changes disrupted treatment engagement, producing considerable health and social harms. The introduction of Methadose® precipitated increased withdrawal symptoms. The discontinuation of pharmacy delivery services led to interruptions in MMT and codispensed HIV medications due to constraints stemming from their structural vulnerability (e.g., poverty, homelessness). Meanwhile, the loss of pharmacy incentives limited access to material supports utilized by participants to overcome barriers to MMT, while diminishing their capacity to assert some degree of agency in negotiating dispensation arrangements with pharmacies. Collectively, these changes functioned to compromise MMT engagement and increased structural vulnerability to harm, including re-initiation of injection drug use and participation in high-risk incomegenerating strategies. Greater attention to the impacts of social-structural inequities on MMT engagement is needed when modifying MMT programs, especially as other jurisdictions are adopting similar changes. Comprehensive environmental supports should be provided to minimize adverse outcomes during transitional periods. PMID:25875323

  7. Cellulose nanofiber orientation in nanopaper and nanocomposites by cold drawing.

    PubMed

    Sehaqui, Houssine; Ezekiel Mushi, Ngesa; Morimune, Seira; Salajkova, Michaela; Nishino, Takashi; Berglund, Lars A

    2012-02-01

    To exploit the mechanical potential of native cellulose fibrils, we report on the preparation of nanopaper with preferred orientation of nanofibrillated cellulose (TEMPO-NFC) by cold drawing. The preparation route is papermaking-like and includes vacuum filtering of a TEMPO-oxidated NFC water dispersion, drawing in wet state and drying. The orientation of the fibrils in the nanopaper was assessed by AFM and wide-angle X-ray diffraction analysis, and the effect on mechanical properties of the resulting nanopaper structure was investigated by tensile tests. At high draw ratio, the degree of orientation is as high as 82 and 89% in-the-plane and cross-sectional planes of the nanopaper, respectively, and the Young's modulus is 33 GPa. This is much higher than mechanical properties of isotropic nanopaper. The cold drawing method can be also applied to NFC nanocomposites as demonstrated by preparation of TEMPO-NFC/hydroxyethyl cellulose (HEC) nanocomposites. The introduction of the soft HEC matrix allows further tailoring of the mechanical properties.

  8. Learning about Body Systems. Superific Science Book IX. A Good Apple Science Activity Book for Grades 5-8+.

    ERIC Educational Resources Information Center

    Conway, Lorraine

    This document offers an explanation and drawings of each of the major systems of the human body and of the five senses. It provides teachers with classroom activities, demonstrations, and experiments which are intended to involve students in the acquisition of knowledge concerning the structure and function of their bodies. The drawings of the…

  9. Vegetation Recovery and Stand Structure Following a Prescribed Stand-Replacement Burn in Sand Pine Scrub

    Treesearch

    Cathryn H. Greenberg

    2003-01-01

    Vegetation and stand structure of sand pine scrub in central Florida, USA, were measured before a prescribed stand-replacement burn and for > 8 y afterward. Herbaceous species richness peaked within 16 months postburn, then gradually declined, although significant differences were detected only between 16 months and > 8 y postburn. Twenty-two plant species...

  10. The effect of temperature and drawing ratio on the mechanical properties of polypropylene monofilaments

    NASA Astrophysics Data System (ADS)

    Taheri, Hesam; Nóbrega, João Miguel; Samyn, Pieter; Covas, José Antonio

    2014-05-01

    In this work, the simultaneous effect of both temperature and drawing ratio during processing of polypropylene monofilaments has been investigated. The basis of this work specifically aims at emphasizing the conditions of temperature and drawing ratio applied in the cooling bath, in order to find out under which conditions the named parameters can be applied in a processing line under continuous extrusion. The effects of temperature are studied for a constant total drawing ratio to analyze the influences on mechanical properties and structural differences of the final polypropylene monofilament. The quenched monofilaments were drawn around an adjustable guide assembly in the quench bath and first drawing stage, imparting thermal and mechanical treatments to the filaments. In the heating stage, monofilaments are affected to high-speed draw rolls while passing through the oven. As such, the best conditions to produce a polypropylene monofilament with high tenacity strength were determined. Results of this study show that the monofilament properties are significantly affected by temperature in the cooling zone. The nature of the first drawing had a significant effect on the end properties and monofilaments with modulus of 637 MPa have finally been manufactured. We have also proposed a new hypothesis, which is termed "gap nucleation" and determine this phenomenon in the gap between die and cooling bath.

  11. Efficient RNA structure comparison algorithms.

    PubMed

    Arslan, Abdullah N; Anandan, Jithendar; Fry, Eric; Monschke, Keith; Ganneboina, Nitin; Bowerman, Jason

    2017-12-01

    Recently proposed relative addressing-based ([Formula: see text]) RNA secondary structure representation has important features by which an RNA structure database can be stored into a suffix array. A fast substructure search algorithm has been proposed based on binary search on this suffix array. Using this substructure search algorithm, we present a fast algorithm that finds the largest common substructure of given multiple RNA structures in [Formula: see text] format. The multiple RNA structure comparison problem is NP-hard in its general formulation. We introduced a new problem for comparing multiple RNA structures. This problem has more strict similarity definition and objective, and we propose an algorithm that solves this problem efficiently. We also develop another comparison algorithm that iteratively calls this algorithm to locate nonoverlapping large common substructures in compared RNAs. With the new resulting tools, we improved the RNASSAC website (linked from http://faculty.tamuc.edu/aarslan ). This website now also includes two drawing tools: one specialized for preparing RNA substructures that can be used as input by the search tool, and another one for automatically drawing the entire RNA structure from a given structure sequence.

  12. Improving the efficiency of molecular replacement by utilizing a new iterative transform phasing algorithm

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    He, Hongxing; Fang, Hengrui; Miller, Mitchell D.

    2016-07-15

    An iterative transform algorithm is proposed to improve the conventional molecular-replacement method for solving the phase problem in X-ray crystallography. Several examples of successful trial calculations carried out with real diffraction data are presented. An iterative transform method proposed previously for direct phasing of high-solvent-content protein crystals is employed for enhancing the molecular-replacement (MR) algorithm in protein crystallography. Target structures that are resistant to conventional MR due to insufficient similarity between the template and target structures might be tractable with this modified phasing method. Trial calculations involving three different structures are described to test and illustrate the methodology. The relationshipmore » of the approach to PHENIX Phaser-MR and MR-Rosetta is discussed.« less

  13. Theoretical foundations for quantitative paleogenetics. III - The molecular divergence of nucleic acids and proteins for the case of genetic events of unequal probability

    NASA Technical Reports Server (NTRS)

    Holmquist, R.; Pearl, D.

    1980-01-01

    Theoretical equations are derived for molecular divergence with respect to gene and protein structure in the presence of genetic events with unequal probabilities: amino acid and base compositions, the frequencies of nucleotide replacements, the usage of degenerate codons, the distribution of fixed base replacements within codons and the distribution of fixed base replacements among codons. Results are presented in the form of tables relating the probabilities of given numbers of codon base changes with respect to the original codon for the alpha hemoglobin, beta hemoglobin, myoglobin, cytochrome c and parvalbumin group gene families. Application of the calculations to the rabbit alpha and beta hemoglobin mRNAs and proteins indicates that the genes are separated by about 425 fixed based replacements distributed over 114 codon sites, which is a factor of two greater than previous estimates. The theoretical results also suggest that many more base replacements are required to effect a given gene or protein structural change than previously believed.

  14. Seismic model study of Patrick Draw field, Wyoming: a stratigraphic trap in the Upper Cretaceous Almond Formation

    USGS Publications Warehouse

    Anderson, Robert C.; Ryder, Robert T.

    1978-01-01

    The Patrick Draw field, located on the eastern flank of the Rock Springs uplift in the Washakie basin of southwestern Wyoming, was discovered in 1959 without the use of geophysical methods. The field is a classic example of a stratigraphic trap, where Upper Cretaceous porous sandstone units pinch out on a structural nose. Two-dimensional seismic modeling was used to construct the seismic waveform expressions of the Patrick Draw field, and to better understand how to explore for other 'Patrick Draw' fields. Interpretation of the model shows that the detection of the reservoir sand is very difficult, owing to a combination of acoustic contrasts and bed thickness. Because the model included other major stratigraphic units in the subsurface, several stratigraphic traps are suggested as potential exploration targets.

  15. Application of ChemDraw NMR Tool: Correlation of Program-Generated 13C Chemical Shifts and pKa Values of para-Substituted Benzoic Acids

    NASA Astrophysics Data System (ADS)

    Wang, Hongyi

    2005-09-01

    An application of ChemDraw NMR Tool was demonstrated by correlation of program-generated 13 C NMR chemical shifts and p K a values of para-substituted benzoic acids. Experimental 13 C NMR chemical shifts were analyzed in the same way for comparison. The project can be used as an assignment at the end of the first-year organic chemistry course to review topics or explore new techniques: Hammett equation, acid base equilibrium theory, electronic nature of functional groups, inductive and resonance effects, structure reactivity relationship, NMR spectroscopy, literature search, database search, and ChemDraw software.

  16. Agricultural Structures, Volume II.

    ERIC Educational Resources Information Center

    Linhardt, Richard E.; Burhoe, Steve

    This guide to a curriculum unit in agricultural structures is designed to expand the curriculum materials available in vocational agriculture in Missouri. It and Agricultural Structures I (see note) provide reference materials to systematize the curriculum. The six units cover working with concrete (19 lessons, 2 laboratory exercises), drawing and…

  17. Nicorette reborn? E-cigarettes in light of the history of nicotine replacement technology.

    PubMed

    Elam, Mark J

    2015-06-01

    E-cigarettes are currently hotly debated as threatening to re-normalize cigarette smoking and make nicotine addiction publicly acceptable once more. In this paper I contextualize the e-cigarette controversy in light of longstanding disagreements about the meaning and significance of nicotine replacement technologies. A concerted effort to develop such technologies first emerged in Sweden at the end of the 1960s, embodying a vital tension. Two competing 'scripts' vied to influence and shape innovative designs. On the one hand, Nicorette chewing gum was conceived as a therapeutic device aiding smoking cessation. On the other hand, it was cast as a cigarette substitute designed to deliver nicotine 'in the right way', thereby advancing the creative destruction of the combustible cigarette as a drug delivery platform. Drawing on historical and archival research I outline how these two alternative innovation scripts started out entangled with each other before becoming disentangled, leading to the eventual stabilization of Nicorette gum as a therapeutic product to be deployed in the treatment of smoking as a dependence disorder. While a post-therapeutic future for nicotine replacement was charted by Michael Russell at the beginning of the 1990s, it is only with the rise of e-cigarettes after 2003 that such a future has started to verge on reality. E-cigarettes can be seen as resurrecting the historically marginalized script of nicotine replacement as dedicated to righting nicotine consumption and freeing it from the wrongful drug delivery of the modern cigarette. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Diffusion and Interface Effects during Preparation of All-Solid Microstructured Fibers

    PubMed Central

    Jens, Kobelke; Jörg, Bierlich; Katrin, Wondraczek; Claudia, Aichele; Zhiwen, Pan; Sonja, Unger; Kay, Schuster; Hartmut, Bartelt

    2014-01-01

    All-solid microstructured optical fibers (MOF) allow the realization of very flexible optical waveguide designs. They are prepared by stacking of doped silica rods or canes in complex arrangements. Typical dopants in silica matrices are germanium and phosphorus to increase the refractive index (RI), or boron and fluorine to decrease the RI. However, the direct interface contact of stacking elements often causes interrelated chemical reactions or evaporation during thermal processing. The obtained fiber structures after the final drawing step thus tend to deviate from the targeted structure risking degrading their favored optical functionality. Dopant profiles and design parameters (e.g., the RI homogeneity of the cladding) are controlled by the combination of diffusion and equilibrium conditions of evaporation reactions. We show simulation results of diffusion and thermal dissociation in germanium and fluorine doped silica rod arrangements according to the monitored geometrical disturbances in stretched canes or drawn fibers. The paper indicates geometrical limits of dopant structures in sub-µm-level depending on the dopant concentration and the thermal conditions during the drawing process. The presented results thus enable an optimized planning of the preform parameters avoiding unwanted alterations in dopant concentration profiles or in design parameters encountered during the drawing process. PMID:28788219

  19. Diffusion and Interface Effects during Preparation of All-Solid Microstructured Fibers.

    PubMed

    Jens, Kobelke; Jörg, Bierlich; Katrin, Wondraczek; Claudia, Aichele; Zhiwen, Pan; Sonja, Unger; Kay, Schuster; Hartmut, Bartelt

    2014-09-25

    All-solid microstructured optical fibers (MOF) allow the realization of very flexible optical waveguide designs. They are prepared by stacking of doped silica rods or canes in complex arrangements. Typical dopants in silica matrices are germanium and phosphorus to increase the refractive index (RI), or boron and fluorine to decrease the RI. However, the direct interface contact of stacking elements often causes interrelated chemical reactions or evaporation during thermal processing. The obtained fiber structures after the final drawing step thus tend to deviate from the targeted structure risking degrading their favored optical functionality. Dopant profiles and design parameters (e.g., the RI homogeneity of the cladding) are controlled by the combination of diffusion and equilibrium conditions of evaporation reactions. We show simulation results of diffusion and thermal dissociation in germanium and fluorine doped silica rod arrangements according to the monitored geometrical disturbances in stretched canes or drawn fibers. The paper indicates geometrical limits of dopant structures in sub-µm-level depending on the dopant concentration and the thermal conditions during the drawing process. The presented results thus enable an optimized planning of the preform parameters avoiding unwanted alterations in dopant concentration profiles or in design parameters encountered during the drawing process.

  20. Railway/highway at-grade crossing management : an overview.

    DOT National Transportation Integrated Search

    2014-12-01

    This report draws on data from around the United States to describe the features of a successful : railway/highway at-grade crossing management program; it emphasizes the highway/trackbed structures : and crossing surfaces. Developing a structurally ...

  1. A gamma-ray testing technique for spacecraft. [considering cosmic radiation effects

    NASA Technical Reports Server (NTRS)

    Gribov, B. S.; Repin, N. N.; Sakovich, V. A.; Sakharov, V. M.

    1977-01-01

    The simulated cosmic radiation effect on a spacecraft structure is evaluated by gamma ray testing in relation to structural thickness. A drawing of the test set-up is provided and measurement errors are discussed.

  2. Translation of an engineered nanofibrous disc-like angle-ply structure for intervertebral disc replacement in a small animal model.

    PubMed

    Martin, John T; Milby, Andrew H; Chiaro, Joseph A; Kim, Dong Hwa; Hebela, Nader M; Smith, Lachlan J; Elliott, Dawn M; Mauck, Robert L

    2014-06-01

    Intervertebral disc degeneration has been implicated in the etiology of low back pain; however, the current surgical strategies for treating symptomatic disc disease are limited. A variety of materials have been developed to replace disc components, including the nucleus pulposus (NP), the annulus fibrosus (AF) and their combination into disc-like engineered constructs. We have previously shown that layers of electrospun poly(ε-caprolactone) scaffold, mimicking the hierarchical organization of the native AF, can achieve functional parity with native tissue. Likewise, we have combined these structures with cell-seeded hydrogels (as an NP replacement) to form disc-like angle-ply structures (DAPS). The objective of this study was to develop a model for the evaluation of DAPS in vivo. Through a series of studies, we developed a surgical approach to replace the rat caudal disc with an acellular DAPS and then stabilized the motion segment via external fixation. We then optimized cell infiltration into DAPS by including sacrificial poly(ethylene oxide) layers interspersed throughout the angle-ply structure. Our findings illustrate that DAPS are stable in the caudal spine, are infiltrated by cells from the peri-implant space and that infiltration is expedited by providing additional routes for cell migration. These findings establish a new in vivo platform in which to evaluate and optimize the design of functional disc replacements. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  3. The road less taken: modularization and waterways as a domestic disaster response mechanism.

    PubMed

    Donahue, Donald A; Cunnion, Stephen O; Godwin, Evelyn A

    2013-01-01

    Preparedness scenarios project the need for significant healthcare surge capacity. Current planning draws heavily from the military model, leveraging deployable infrastructure to augment or replace extant capabilities. This approach would likely prove inadequate in a catastrophic disaster, as the military model relies on forewarning and an extended deployment cycle. Local equipping for surge capacity is prohibitively costly while movement of equipment can be subject to a single point of failure. Translational application of maritime logistical techniques and an ancient mode of transportation can provide a robust and customizable approach to disaster relief for greater than 90 percent of the American population.

  4. Stress analysis of the space telescope focal plane structure joint

    NASA Technical Reports Server (NTRS)

    Foster, W. A., Jr.; Shoemaker, W. L.

    1985-01-01

    Two major efforts were begun concerning the Space Telescope focal plane structure joint. The 3-D solid finite element modeling of the bipod flexure plate was carried out. Conceptual models were developed for the load transfer through the three major bolts to the flexure plate. The flexure plate drawings were reconstructed using DADAM for the purpose of developing a file from which the coordinates of any point on the flexure plate could be determined and also to locate the attachment points of the various components which connect with the flexure plate. For modeling convenience the CADAM drawing of the flexure plate has been divided into several regions which will be subdivided into finite elements using MSGMESH, which is a finite element mesh generator available with MSC/NASTRAN. In addition to the CADAM work on the flexure plate, an effort was also begun to develop computer aided drawings of the peripheral beam which will be used to assist in modeling the connection between it and the flexure plate.

  5. Cost-effective and rapid concrete repair techniques.

    DOT National Transportation Integrated Search

    2016-02-08

    Concrete is a principal component of many transportation structures. While highly durable, a : variety of processes degrade and damage concrete. Replacement is expensive. Many cases : warrant repair instead of replacement. Since many damage processes...

  6. Spacecraft methods and structures with enhanced attitude control that facilitates gyroscope substitutions

    NASA Technical Reports Server (NTRS)

    Li, Rongsheng (Inventor); Kurland, Jeffrey A. (Inventor); Dawson, Alec M. (Inventor); Wu, Yeong-Wei A. (Inventor); Uetrecht, David S. (Inventor)

    2004-01-01

    Methods and structures are provided that enhance attitude control during gyroscope substitutions by insuring that a spacecraft's attitude control system does not drive its absolute-attitude sensors out of their capture ranges. In a method embodiment, an operational process-noise covariance Q of a Kalman filter is temporarily replaced with a substantially greater interim process-noise covariance Q. This replacement increases the weight given to the most recent attitude measurements and hastens the reduction of attitude errors and gyroscope bias errors. The error effect of the substituted gyroscopes is reduced and the absolute-attitude sensors are not driven out of their capture range. In another method embodiment, this replacement is preceded by the temporary replacement of an operational measurement-noise variance R with a substantially larger interim measurement-noise variance R to reduce transients during the gyroscope substitutions.

  7. DNA Architectures for Templated Material Growth

    DTIC Science & Technology

    2011-09-01

    Solubilization of the DNA in non-aqueous solvents is achieved by replacing charge stabilizing salts with surfactants. Retention of DNA hierarchical structure...solvents is achieved by replacing charge stabilizing salts with surfactants. Retention of DNA hierarchical structure under both conditions will be...studied and explained, and is only being reproduced in this experiment.12-14 Both CTAB and CTAC, were reacted with the reconstituted DNA (salmon sperm

  8. Photocopy of drawing. VEHICLE ASSEMBLY BUILDING MODIFICATIONS, HIGH BAY AREA. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of drawing. VEHICLE ASSEMBLY BUILDING MODIFICATIONS, HIGH BAY AREA. NASA John F. Kennedy Space Center, Florida. File Number 79K05424, Seelye Stevenson Value & Knecht, March 1975. TRANSFER AISLE NORTH DOOR, ARCHITECTURAL AND STRUCTURAL ELEVATIONS, SECTIONS AND DETAILS. Sheet 79 of 207 - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

  9. Preliminary design review package on air flat plate collector for solar heating and cooling system

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Guidelines to be used in the development and fabrication of a prototype air flat plate collector subsystem containing 320 square feet (10-4 ft x 8 ft panels) of collector area are presented. Topics discussed include: (1) verification plan; (2) thermal analysis; (3) safety hazard analysis; (4) drawing list; (5) special handling, installation and maintenance tools; (6) structural analysis; and (7) selected drawings.

  10. [Psychosomatic aspects of parent-child relations in atopic eczema in childhood. II. Child-rearing style, the family situation in a drawing test and structured interview].

    PubMed

    Ring, J; Palos, E

    1986-11-01

    To evaluate the style of education in this group of children, "scale versions" according to Stapf were used. Mothers of atopic children were found to be significantly more "strict" in their educational approach compared with control mothers (P less than 0.01). There was no significant difference between the two groups of fathers. In particular, mothers of atopic children significantly more often favored "grown-up" behavior in their children and the capacity to enjoy the joy of children was significantly less pronounced compared with controls. In the children's drawings, children with atopic eczema lacked the "friendly atmosphere" expressed in drawings of control children. Fathers of atopic children were drawn significantly smaller than the respective mothers. In animal drawings, children with atopic eczema mostly selected unpleasant or dangerous animals to describe their parents, brothers, or sisters. From the structured interviews, the following points were remarkable: atopic children more often display aggressive thoughts or behavior against their parents than do controls. Mothers of atopic children react less spontaneously and less emotionally to children's emotions. Maternal affection often takes place as a hygienic ritual or in a body and achievement-oriented fashion. Mothers of atopic children like them to behave in a "grown-up" manner.

  11. The Structure of Reciprocity

    ERIC Educational Resources Information Center

    Molm, Linda D.

    2010-01-01

    Reciprocity is one of the defining features of social exchange and social life, yet exchange theorists have tended to take it for granted. Drawing on work from a decade-long theoretical research program, I argue that reciprocity is structured and variable across different forms of exchange, that these variations in the structure of reciprocity…

  12. Interactive Hangman Teaches Amino Acid Structures and Abbreviations

    ERIC Educational Resources Information Center

    Pennington, Britney O.; Sears, Duane; Clegg, Dennis O.

    2014-01-01

    We developed an interactive exercise to teach students how to draw the structures of the 20 standard amino acids and to identify the one-letter abbreviations by modifying the familiar game of "Hangman." Amino acid structures were used to represent single letters throughout the game. To provide additional practice in identifying…

  13. Scale Model of 9x6 Thermal Structures Tunnel

    NASA Image and Video Library

    1960-07-19

    Scale Model of 9x6 Thermal Structures Tunnel: Image L-7256.01 is a Drawing Figure 12 in NASA Document L-1265. The Major components of the 9-by6-Foot Thermal Structures Tunnel. The 97 foot-long diffuser was added in 1960 to reduce noise.

  14. Photograph of elevation and details of structure 841, used for ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photograph of elevation and details of structure 841, used for repair project, dated 1973. Drawing in collection of Caretaker Site Office, Philadelphia Naval Business Center. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure No. 841, Delaware Avenue between East Fourth Street & Webster Avenue, League Island, Philadelphia, Philadelphia County, PA

  15. From lows to highs: using low-resolution models to phase X-ray data

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stuart, David I.; Diamond Light Source Ltd, Diamond House, Harwell Science and Innovation Campus, Didcot; Abrescia, Nicola G. A., E-mail: nabrescia@cicbiogune.es

    2013-11-01

    An unusual example of how virus structure determination pushes the limits of the molecular replacement method is presented. The study of virus structures has contributed to methodological advances in structural biology that are generally applicable (molecular replacement and noncrystallographic symmetry are just two of the best known examples). Moreover, structural virology has been instrumental in forging the more general concept of exploiting phase information derived from multiple structural techniques. This hybridization of structural methods, primarily electron microscopy (EM) and X-ray crystallography, but also small-angle X-ray scattering (SAXS) and nuclear magnetic resonance (NMR) spectroscopy, is central to integrative structural biology. Here,more » the interplay of X-ray crystallography and EM is illustrated through the example of the structural determination of the marine lipid-containing bacteriophage PM2. Molecular replacement starting from an ∼13 Å cryo-EM reconstruction, followed by cycling density averaging, phase extension and solvent flattening, gave the X-ray structure of the intact virus at 7 Å resolution This in turn served as a bridge to phase, to 2.5 Å resolution, data from twinned crystals of the major coat protein (P2), ultimately yielding a quasi-atomic model of the particle, which provided significant insights into virus evolution and viral membrane biogenesis.« less

  16. Macromolecular powder diffraction : structure solution via molecular.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Doebbler, J.; Von Dreele, R.; X-Ray Science Division

    Macromolecular powder diffraction is a burgeoning technique for protein structure solution - ideally suited for cases where no suitable single crystals are available. Over the past seven years, pioneering work by Von Dreele et al. [1,2] and Margiolaki et al. [3,4] has demonstrated the viability of this approach for several protein structures. Among these initial powder studies, molecular replacement solutions of insulin and turkey lysozyme into alternate space groups were accomplished. Pressing the technique further, Margiolaki et al. [5] executed the first molecular replacement of an unknown protein structure: the SH3 domain of ponsin, using data from a multianalyzer diffractometer.more » To demonstrate that cross-species molecular replacement using image plate data is also possible, we present the solution of hen egg white lysozyme using the 60% identical human lysozyme (PDB code: 1LZ1) as the search model. Due to the high incidence of overlaps in powder patterns, especially in more complex structures, we have used extracted intensities from five data sets taken at different salt concentrations in a multi-pattern Pawley refinement. The use of image plates severely increases the overlap problem due to lower detector resolution, but radiation damage effects are minimized with shorter exposure times and the fact that the entire pattern is obtained in a single exposure. This image plate solution establishes the robustness of powder molecular replacement resulting from different data collection techniques.« less

  17. Teaching Structure in Algebra

    ERIC Educational Resources Information Center

    Merlin, Ethan M.

    2013-01-01

    This article describes how the author has developed tasks for students that address the missed "essence of the matter" of algebraic transformations. Specifically, he has found that having students practice "perceiving" algebraic structure--by naming the "glue" in the expressions, drawing expressions using…

  18. 23 CFR 650.401 - Purpose.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Highway Bridge Replacement and Rehabilitation Program § 650.401 Purpose. The... Bridge Replacement and Rehabilitation Program in accordance with 23 U.S.C. 144. ...

  19. A multilevel layout algorithm for visualizing physical and genetic interaction networks, with emphasis on their modular organization.

    PubMed

    Tuikkala, Johannes; Vähämaa, Heidi; Salmela, Pekka; Nevalainen, Olli S; Aittokallio, Tero

    2012-03-26

    Graph drawing is an integral part of many systems biology studies, enabling visual exploration and mining of large-scale biological networks. While a number of layout algorithms are available in popular network analysis platforms, such as Cytoscape, it remains poorly understood how well their solutions reflect the underlying biological processes that give rise to the network connectivity structure. Moreover, visualizations obtained using conventional layout algorithms, such as those based on the force-directed drawing approach, may become uninformative when applied to larger networks with dense or clustered connectivity structure. We implemented a modified layout plug-in, named Multilevel Layout, which applies the conventional layout algorithms within a multilevel optimization framework to better capture the hierarchical modularity of many biological networks. Using a wide variety of real life biological networks, we carried out a systematic evaluation of the method in comparison with other layout algorithms in Cytoscape. The multilevel approach provided both biologically relevant and visually pleasant layout solutions in most network types, hence complementing the layout options available in Cytoscape. In particular, it could improve drawing of large-scale networks of yeast genetic interactions and human physical interactions. In more general terms, the biological evaluation framework developed here enables one to assess the layout solutions from any existing or future graph drawing algorithm as well as to optimize their performance for a given network type or structure. By making use of the multilevel modular organization when visualizing biological networks, together with the biological evaluation of the layout solutions, one can generate convenient visualizations for many network biology applications.

  20. Lightning Protection and Structural Bonding for the B2 Test Stand

    NASA Technical Reports Server (NTRS)

    Kinard, Brandon

    2015-01-01

    With the privatization of the space industry, NASA has entered a new era. To explore deeper parts of the solar system, NASA is developing a new spacecraft, the Space Launch System (SLS), capable of reaching these destinations, such as an asteroid or Mars. However, the test stand that is capable of testing the stage has been unused for many years. In addition to the updating/repair of the stand, more steel is being added to fully support the SLS. With all these modifications, the lightning protection system must be brought up to code to assure the protection of all personnel and assets. Structural bonding is a part of the lightning protection system. The focus of this project was to assure proper structural bonding. To begin, all relevant technical standards and the construction specifications were reviewed. This included both the specifications for the lightning protection and for general construction. The drawings were reviewed as well. From the drawings, bolted structural joints were reviewed to determine whether bonding was necessary. Several bolted joints were determined to need bonding according to the notes in the drawings. This exceeds the industry standards. The bolted joints are an electrically continuous joint. During tests, the stand experiences heavy vibration that may weaken the continuity of the bolted joint. Therefore, the secondary bonding is implemented to ensure that the structural joint has low resistance. If the structural joint has a high resistance because of corrosion, a potential gradient can occur that can cause a side flash. Damage, injury, or death can occur from a side flash so they are to be prevented. A list of the identified structural joints was compiled and sent to the contractor to be bonded. That covers the scope of this project.

  1. Implementation of a graphical user interface for the virtual multifrequency spectrometer: The VMS-Draw tool.

    PubMed

    Licari, Daniele; Baiardi, Alberto; Biczysko, Malgorzata; Egidi, Franco; Latouche, Camille; Barone, Vincenzo

    2015-02-15

    This article presents the setup and implementation of a graphical user interface (VMS-Draw) for a virtual multifrequency spectrometer. Special attention is paid to ease of use, generality and robustness for a panel of spectroscopic techniques and quantum mechanical approaches. Depending on the kind of data to be analyzed, VMS-Draw produces different types of graphical representations, including two-dimensional or three-dimesional (3D) plots, bar charts, or heat maps. Among other integrated features, one may quote the convolution of stick spectra to obtain realistic line-shapes. It is also possible to analyze and visualize, together with the structure, the molecular orbitals and/or the vibrational motions of molecular systems thanks to 3D interactive tools. On these grounds, VMS-Draw could represent a useful additional tool for spectroscopic studies integrating measurements and computer simulations. Copyright © 2014 Wiley Periodicals, Inc.

  2. Corn steep liquor as a nutritional source for biocementation and its impact on concrete structural properties.

    PubMed

    Joshi, Sumit; Goyal, Shweta; Reddy, M Sudhakara

    2018-05-28

    Microbial-induced carbonate precipitation (MICP) has a potential to improve the durability properties and remediate cracks in concrete. In the present study, the main emphasis is placed upon replacing the expensive laboratory nutrient broth (NB) with corn steep liquor (CSL), an industrial by-product, as an alternate nutrient medium during biocementation. The influence of organic nutrients (carbon and nitrogen content) of CSL and NB on the chemical and structural properties of concrete structures is studied. It has been observed that cement-setting properties were unaffected by CSL organic content, while NB medium influenced it. Carbon and nitrogen content in concrete structures was significantly lower in CSL-treated specimens than in NB-treated specimens. Decreased permeability and increased compressive strength were reported when NB is replaced with CSL in bacteria-treated specimens. The present study results suggest that CSL can be used as a replacement growth medium for MICP technology at commercial scale.

  3. Anti-terrorist vehicle crash impact energy absorbing barrier

    DOEpatents

    Swahlan, David J.

    1989-01-01

    An anti-terrorist vehicle crash barrier includes side support structures, crushable energy absorbing aluminum honeycomb modules, and an elongated impact-resistant beam extending between, and at its opposite ends through vertical guideways defined by, the side support structures. An actuating mechanism supports the beam at its opposite ends for movement between a lowered barrier-withdrawn position in which a traffic-supporting side of the beam is aligned with a traffic-bearing surface permitting vehicular traffic between the side support structures and over the beam, and a raised barrier-imposed position in which the beam is aligned with horizontal guideways defined in the side support structures above the traffic-bearing surface, providing an obstruction to vehicular traffic between the side support structures. The beam is movable rearwardly in the horizontal guideways with its opposite ends disposed transversely therethrough upon being impacted at its forward side by an incoming vehicle. The crushable modules are replaceably disposed in the horizontal guideways between aft ends thereof and the beam. The beam, replaceable modules, side support structures and actuating mechanism are separate and detached from one another such that the beam and replaceable modules are capable of coacting to disable and stop an incoming vehicle without causing structural damage to the side support structures and actuating mechanism.

  4. Structure determination of an 11-subunit exosome in complex with RNA by molecular replacement

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Makino, Debora Lika, E-mail: dmakino@biochem.mpg.de; Conti, Elena

    The crystallographic steps towards the structure determination of a complete eukaryotic exosome complex bound to RNA are presented. Phasing of this 11-protein subunit complex was carried out via molecular replacement. The RNA exosome is an evolutionarily conserved multi-protein complex involved in the 3′ degradation of a variety of RNA transcripts. In the nucleus, the exosome participates in the maturation of structured RNAs, in the surveillance of pre-mRNAs and in the decay of a variety of noncoding transcripts. In the cytoplasm, the exosome degrades mRNAs in constitutive and regulated turnover pathways. Several structures of subcomplexes of eukaryotic exosomes or related prokaryoticmore » exosome-like complexes are known, but how the complete assembly is organized to fulfil processive RNA degradation has been unclear. An atomic snapshot of a Saccharomyces cerevisiae 420 kDa exosome complex bound to an RNA substrate in the pre-cleavage state of a hydrolytic reaction has been determined. Here, the crystallographic steps towards the structural elucidation, which was carried out by molecular replacement, are presented.« less

  5. KSC-08pd0078

    NASA Image and Video Library

    2008-01-23

    KENNEDY SPACE CENTER, FLA. -- Quality inspectors with NASA and Lockheed Martin examine a red-line drawing of foam placement on space shuttle Atlantis's external tank (in front of them) to verify the foam insulation that was reapplied. The foam covers the feed-through engine cut-off, or ECO, sensor connector. The foam was removed to enable engineers to remove and replace the ECO sensor connector on the tank. The feed-through connector passes the wires from the inside of the tank to the outside. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The pins in the replacement connector were precisely soldered to create a connection that allows sensors inside the tank to send signals to the computers onboard Atlantis. The repair work was done on Atlantis while the shuttle has been on Launch Pad 39A at NASA's Kennedy Space Center. The launch date for the shuttle's STS-122 mission has now been targeted for Feb. 7. Photo credit: NASA/Cory Husten

  6. KSC-08pd0077

    NASA Image and Video Library

    2008-01-23

    KENNEDY SPACE CENTER, FLA. -- Quality inspectors with NASA and Lockheed Martin examine a red-line drawing of foam placement on space shuttle Atlantis's external tank (in front of them) to verify the foam insulation that was reapplied. The foam covers the feed-through engine cut-off, or ECO, sensor connector. The foam was removed to enable engineers to remove and replace the ECO sensor connector on the tank. The feed-through connector passes the wires from the inside of the tank to the outside. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The pins in the replacement connector were precisely soldered to create a connection that allows sensors inside the tank to send signals to the computers onboard Atlantis. The repair work was done on Atlantis while the shuttle has been on Launch Pad 39A at NASA's Kennedy Space Center. The launch date for the shuttle's STS-122 mission has now been targeted for Feb. 7. Photo credit: NASA/Cory Husten

  7. KSC-08pd0080

    NASA Image and Video Library

    2008-01-23

    KENNEDY SPACE CENTER, FLA. -- Quality inspectors with NASA and Lockheed Martin examine a red-line drawing of foam placement on space shuttle Atlantis's external tank (in front of them) to verify the foam insulation that was reapplied. The foam covers the feed-through engine cut-off, or ECO, sensor connector. The foam was removed to enable engineers to remove and replace the ECO sensor connector on the tank. The feed-through connector passes the wires from the inside of the tank to the outside. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The pins in the replacement connector were precisely soldered to create a connection that allows sensors inside the tank to send signals to the computers onboard Atlantis. The repair work was done on Atlantis while the shuttle has been on Launch Pad 39A at NASA's Kennedy Space Center. The launch date for the shuttle's STS-122 mission has now been targeted for Feb. 7. Photo credit: NASA/Cory Husten

  8. KSC-08pd0079

    NASA Image and Video Library

    2008-01-23

    KENNEDY SPACE CENTER, FLA. -- Quality inspectors with NASA and Lockheed Martin examine a red-line drawing of foam placement on space shuttle Atlantis's external tank (in front of them) to verify the foam insulation that was reapplied. The foam covers the feed-through engine cut-off, or ECO, sensor connector. The foam was removed to enable engineers to remove and replace the ECO sensor connector on the tank. The feed-through connector passes the wires from the inside of the tank to the outside. Results of a tanking test on Dec. 18 pointed to an open circuit in the feed-through connector wiring, which is located at the base of the tank. The pins in the replacement connector were precisely soldered to create a connection that allows sensors inside the tank to send signals to the computers onboard Atlantis. The repair work was done on Atlantis while the shuttle has been on Launch Pad 39A at NASA's Kennedy Space Center. The launch date for the shuttle's STS-122 mission has now been targeted for Feb. 7. Photo credit: NASA/Cory Husten

  9. Study and Optimization of Helicopter Subfloor Energy Absorption Structure with Foldcore Sandwich Structures

    NASA Astrophysics Data System (ADS)

    HuaZhi, Zhou; ZhiJin, Wang

    2017-11-01

    The intersection element is an important part of the helicopter subfloor structure. In order to improve the crashworthiness properties, the floor and the skin of the intersection element are replaced with foldcore sandwich structures. Foldcore is a kind of high-energy absorption structure. Compared with original structure, the new intersection element shows better buffering capacity and energy-absorption capacity. To reduce structure’s mass while maintaining the crashworthiness requirements satisfied, optimization of the intersection element geometric parameters is conducted. An optimization method using NSGA-II and Anisotropic Kriging is used. A significant CPU time saving can be obtained by replacing numerical model with Anisotropic Kriging surrogate model. The operation allows 17.15% reduce of the intersection element mass.

  10. Fluoropolymer Microstructure and Dynamics: Influence of Molecular Orientation Induced by Uniaxial Drawing

    NASA Astrophysics Data System (ADS)

    Miranda, Daniel; Yin, Chaoqing; Runt, James

    Fluorinated semi-crystalline polymer films are attractive for dielectric film applications due to their chemical inertness, heat resistance, and high thermal stability. In the present investigation we explore the influence of orientation induced by uniaxial drawing on the crystalline microstructure and relaxation processes of poly(ethylene-tetrafluoroethylene) (ETFE), in order to ascertain how morphological control can benefit polymer dielectric design. When drawn below or near the Tg, the crystallinity of the drawn films is unchanged, and oriented amorphous structures and crystalline microfibrils form at high draw ratios. This orientation slows segmental relaxation, reflected by an increase in the dynamic Tg, and also delays the transition to the high temperature crystalline form of ETFE. When drawing above the Tg, the films undergo strain-induced crystallization at high draw ratios. For these films an increase in the dynamic Tg is also observed, in addition to a second segmental relaxation process, appearing as a shoulder on the primary process. We propose that this represents a contribution from a rigid amorphous fraction, having slowed chain dynamics. Supported by Office of Naval Research.

  11. A Cross-Age Study of the Understanding of Three Genetic Concepts: How Do They Image the Gene, DNA and Chromosome?

    ERIC Educational Resources Information Center

    Saka, Arzu; Cerrah, Lale; Akdeniz, Ali Riza; Ayas, Alipasa

    2006-01-01

    The study was carried out with 175 Turkish students by using drawings at different ages understanding of gene, DNA and chromosome concepts. Students from 8th, 9th, 11th grades and, science and biology student teachers were simply asked to draw the structure of gene, DNA and chromosome in a cell and also to give explanations about these three…

  12. [The box of pain. Representation of the hospital in children's drawings].

    PubMed

    Mantegazza, Raffaele

    2005-01-01

    Hospitalized children's drawings show that the hospital is perceived from little patients as a huge and often terrific reality, in spite of the efforts made by nurses and doctor in order to soften the experience of hospedalization. There's a need of a change in hospital's structures in order to make them closer to children' word of experience and to give him/her more security and tranquilisation in everyday hospital life.

  13. Turbo Pascal/GEM Software Interface for Scientific Graph Preparation

    DTIC Science & Technology

    1991-04-01

    Well as whatever artistic touches that the author may desire. Even colour hardcopy reproduuction is possible through use of an appropriate colour...drawing axes on graphs. The unit also contains an autoscaling procedure that may be applied separately to all curve axes. 6.3.1 Available structures...procedures AxisScale Provides autoscaled values from specified min and max values. LabelRightAxis Draws ticks and numbers on the right axis. LabelXAxis

  14. Study on Detailing Design of Precast Concrete Frame Structure

    NASA Astrophysics Data System (ADS)

    Lida, Tian; Liming, Li; Kang, Liu; Jiao, Geng; Ming, Li

    2018-03-01

    Taking a certain precast concrete frame structure as an example, this paper introduces the general procedures and key points in detailing design of emulative cast-in-place prefabricated structure from the aspects of structural scheme, precast element layout, shop drawing design and BIM 3D modelling. This paper gives a practical solution for the detailing design of precast concrete frame structure under structural design codes in China.

  15. Local laser-strengthening: Customizing the forming behavior of car body steel sheets

    NASA Astrophysics Data System (ADS)

    Wagner, M.; Jahn, A.; Beyer, E.; Balzani, D.

    2018-05-01

    Future trends in designing lightweight components especially for automotive applications increasingly require complex and delicate structures with highest possible level of capacity [1]. The manufacturing of metallic car body components is primarily realized by deep or stretch drawing. The forming process of especially cold rolled and large-sized components is typically characterized by inhomogeneous stress and strain distributions. As a result, the avoidance of undesirable deep drawing effects like earing and local necking is among the greatest challenges in forming complex car body structures [2]. Hence, a novel local laser-treatment approach with the objective of customizing the forming behavior of car body steel sheets is currently explored.

  16. Assessment of Organic Chemistry Students' Knowledge of Resonance-Related Structures

    ERIC Educational Resources Information Center

    Betancourt-Perez, Rosa; Olivera, Luis Javier; Rodriguez, Julio E.

    2010-01-01

    This study examines how well second-year nonmajor organic chemistry students are learning to draw, interpret, and understand resonance-related structures. Students were tested seven times throughout an academic year using a set of four tasks that reflected their understanding of what these structures represent and how they relate to each other.…

  17. Drawing the Line between Constituent Structure and Coherence Relations in Visual Narratives

    ERIC Educational Resources Information Center

    Cohn, Neil; Bender, Patrick

    2017-01-01

    Theories of visual narrative understanding have often focused on the changes in meaning across a sequence, like shifts in characters, spatial location, and causation, as cues for breaks in the structure of a discourse. In contrast, the theory of visual narrative grammar posits that hierarchic "grammatical" structures operate at the…

  18. Visualization and manipulating the image of a formal data structure (FDS)-based database

    NASA Astrophysics Data System (ADS)

    Verdiesen, Franc; de Hoop, Sylvia; Molenaar, Martien

    1994-08-01

    A vector map is a terrain representation with a vector-structured geometry. Molenaar formulated an object-oriented formal data structure for 3D single valued vector maps. This FDS is implemented in a database (Oracle). In this study we describe a methodology for visualizing a FDS-based database and manipulating the image. A data set retrieved by querying the database is converted into an import file for a drawing application. An objective of this study is that an end-user can alter and add terrain objects in the image. The drawing application creates an export file, that is compared with the import file. Differences between these files result in updating the database which involves checks on consistency. In this study Autocad is used for visualizing and manipulating the image of the data set. A computer program has been written for the data exchange and conversion between Oracle and Autocad. The data structure of the FDS is compared to the data structure of Autocad and the data of the FDS is converted into the structure of Autocad equal to the FDS.

  19. Intracardiac echocardiography to diagnose pannus formation after aortic valve replacement.

    PubMed

    Yamamoto, Yoshiya; Ohara, Takahiro; Funada, Akira; Takahama, Hiroyuki; Amaki, Makoto; Hasegawa, Takuya; Sugano, Yasuo; Kanzaki, Hideaki; Anzai, Toshihisa

    2016-03-01

    A 66-year-old female, under regular follow-up for 20 years after aortic valve replacement (19-mm Carbomedics), presented dyspnea on effort and hypotension during hemodialysis. A transthoracic echocardiogram showed elevation of transvalvular velocity up to 4 m/s, but the structure around the aortic prosthesis was difficult to observe due to artifacts. Fluoroscopy revealed normal motion of the leaflets of the mechanical valve. Intracardiac echocardiography (ICE) revealed a pannus-like structure in the left ventricular outflow tract. Transesophageal echocardiogram also revealed this structure. ICE can visualize structural abnormalities around a prosthetic valve after cardiac surgery even in patients in whom conventional imaging modalities failed.

  20. Two-dimensional streamflow simulations of the Jordan River, Midvale and West Jordan, Utah

    USGS Publications Warehouse

    Kenney, Terry A.; Freeman, Michael L.

    2011-01-01

    The Jordan River in Midvale and West Jordan, Utah, flows adjacent to two U.S. Environmental Protection Agency Superfund sites: Midvale Slag and Sharon Steel. At both sites, geotechnical caps extend to the east bank of the river. The final remediation tasks for these sites included the replacement of a historic sheet-pile dam and the stabilization of the river banks adjacent to the Superfund sites. To assist with these tasks, two hydraulic modeling codes contained in the U.S. Geological Survey (USGS) Multi-Dimensional Surface-Water Modeling System (MD_SWMS), System for Transport and River Modeling (SToRM) and Flow and Sediment Transport and Morphological Evolution of Channels (FaSTMECH), were used to provide predicted water-surface elevations, velocities, and boundary shear-stress values throughout the study reach of the Jordan River. A SToRM model of a 0.7 mile subreach containing the sheet-pile dam was used to compare water-surface elevations and velocities associated with the sheet-pile dam and a proposed replacement structure. Maps showing water-surface elevation and velocity differences computed from simulations of the historic sheet-pile dam and the proposed replacement structure topographies for streamflows of 500 and 1,000 cubic feet per second (ft3/s) were created. These difference maps indicated that the velocities associated with the proposed replacement structure topographies were less than or equal to those associated with the historic sheet-pile dam. Similarly, water-surface elevations associated with the proposed replacement structure topographies were all either greater than or equal to water-surface elevations associated with the sheet-pile dam. A FaSTMECH model was developed for the 2.5-mile study reach to aid engineers in bank stabilization designs. Predicted water-surface elevations, velocities and shear-stress values were mapped on an aerial photograph of the study reach to place these parameters in a spatial context. Profile plots of predicted cross-stream average water-surface elevations and cross-stream maximum and average velocities showed how these parameters change along the study reach for two simulated discharges of 1,040 ft3/s and 2,790 ft3/s. The profile plots for the simulated streamflow of 1,040 ft3/s show that the highest velocities are associated with the constructed sheet-pile replacement structure. Results for the simulated streamflow of 2,790 ft3/s indicate that the geometry of the 7800 South Bridge causes more backwater and higher velocities than the constructed sheet-pile replacement structure.

  1. Estimating ages of white-tailed deer: Age and sex patterns of error using tooth wear-and-replacement and consistency of cementum annuli

    USGS Publications Warehouse

    Samuel, Michael D.; Storm, Daniel J.; Rolley, Robert E.; Beissel, Thomas; Richards, Bryan J.; Van Deelen, Timothy R.

    2014-01-01

    The age structure of harvested animals provides the basis for many demographic analyses. Ages of harvested white-tailed deer (Odocoileus virginianus) and other ungulates often are estimated by evaluating replacement and wear patterns of teeth, which is subjective and error-prone. Few previous studies however, examined age- and sex-specific error rates. Counting cementum annuli of incisors is an alternative, more accurate method of estimating age, but factors that influence consistency of cementum annuli counts are poorly known. We estimated age of 1,261 adult (≥1.5 yr old) white-tailed deer harvested in Wisconsin and Illinois (USA; 2005–2008) using both wear-and-replacement and cementum annuli. We compared cementum annuli with wear-and-replacement estimates to assess misclassification rates by sex and age. Wear-and-replacement for estimating ages of white-tailed deer resulted in substantial misclassification compared with cementum annuli. Age classes of females were consistently underestimated, while those of males were underestimated for younger age classes but overestimated for older age classes. Misclassification resulted in an impression of a younger age-structure than actually was the case. Additionally, we obtained paired age-estimates from cementum annuli for 295 deer. Consistency of paired cementum annuli age-estimates decreased with age, was lower in females than males, and decreased as age estimates became less certain. Our results indicated that errors in the wear-and-replacement techniques are substantial and could impact demographic analyses that use age-structure information. 

  2. Mitochondrial lineage sorting in action – historical biogeography of the Hyles euphorbiae complex (Sphingidae, Lepidoptera) in Italy

    PubMed Central

    2013-01-01

    Background Mitochondrial genes are among the most commonly used markers in studies of species’ phylogeography and to draw conclusions about taxonomy. The Hyles euphorbiae complex (HEC) comprises six distinct mitochondrial lineages in the Mediterranean region, of which one exhibits a cryptic disjunct distribution. The predominant mitochondrial lineage in most of Europe, euphorbiae, is also present on Malta; however, it is nowadays strangely absent from Southern Italy and Sicily, where it is replaced by 'italica'. A separate biological entity in Italy is further corroborated by larval colour patterns with a congruent, confined suture zone along the Northern Apennines. By means of historic DNA extracted from museum specimens, we aimed to investigate the evolution of the mitochondrial demographic structure of the HEC in Italy and Malta throughout the Twentieth Century. Results At the beginning of the Twentieth Century, the European mainland lineages were also present at a moderate frequency in Southern Italy and Sicily. The proportion of 'italica' then steadily increased in this area from below 60 percent to near fixation in about 120 years. Thus, geographical sorting of mitochondrial lineages in the HEC was not as complete then as the current demography suggests. The pattern of an integral 'italica' core region and a disjunct euphorbiae distribution evolved very recently. To explain these strong demographic changes, we propose genetic drift due to anthropogenic habitat loss and fragmentation in combination with an impact from recent climate warming that favoured the spreading of the potentially better adapted 'italica' populations. Conclusions The pattern of geographically separated mitochondrial lineages is commonly interpreted as representing long term separated entities. However, our results indicate that such a pattern can emerge surprisingly quickly, even in a widespread and rather common taxon. We thus caution against drawing hasty taxonomic conclusions from biogeographical patterns of mitochondrial markers derived from modern sampling alone. PMID:23594258

  3. Optimization of a sponge cake formulation with inulin as fat replacer: structure, physicochemical, and sensory properties.

    PubMed

    Rodríguez-García, Julia; Puig, Ana; Salvador, Ana; Hernando, Isabel

    2012-02-01

    The effects of several fat replacement levels (0%, 35%, 50%, 70%, and 100%) by inulin in sponge cake microstructure and physicochemical properties were studied. Oil substitution for inulin decreased significantly (P < 0.05) batter viscosity, giving heterogeneous bubbles size distributions as it was observed by light microscopy. Using confocal laser scanning microscopy the fat was observed to be located at the bubbles' interface, enabling an optimum crumb cake structure development during baking. Cryo-SEM micrographs of cake crumbs showed a continuous matrix with embedded starch granules and coated with oil; when fat replacement levels increased, starch granules appeared as detached structures. Cakes with fat replacement up to 70% had a high crumb air cell values; they were softer and rated as acceptable by an untrained sensory panel (n = 51). So, the reformulation of a standard sponge cake recipe to obtain a new product with additional health benefits and accepted by consumers is achieved. Practical Application:  In this study, fat is replaced by inulin in cakes, which is a fiber mainly obtained from chicory roots. Sponge cake formulations with reductions in fat content up to 70% are achieved. These high-quality products can be labeled as "reduced in fat" according to U.S. FDA (2009) and EU regulations (European-Union 2006). © 2012 Institute of Food Technologists®

  4. An Integrated, Evidence-Based Approach to Transitioning to Operations: Specifications for Future Replacement Lights on ISS

    NASA Technical Reports Server (NTRS)

    Leveton, Lauren; Brainard, George; Whitmire, Alexandra; Kubey, Alan; Maida, Jim; Bowen, Charles; Johnston, Smith

    2010-01-01

    The International Space Station (ISS) currently uses General Luminaire Assemblies (GLAs) as its primary light source. These GLAs are composed of fluorescent lighting and are integrated into the electrical system on Station. Seventy seven of these units are distributed throughout the vehicle, and many of the lights, having reached their lifespan, are no longer functional; while backup panels are available on orbit, it is anticipated that the supplies of fluorescents on the station will be exhausted by 2015. The ISS vehicle office is therefore preparing to replace all of the GLAs, with Solid State Light Assemblies (SSLAs) composed of white Light Emitting Diodes (LEDs). In the Spring of 2010, an announcement for the replacement lights was released. The announcement specified that proposed lighting systems should use LED technology, given certain power draw restrictions and no changes to how the lights are currently controlled (a central on/off switch per node, and a dial to turn on/off and increase brightness on each lighting unit). The replacement lights are to follow current specifications for brightness levels (lux) and color temperature (degrees Kelvin, or K). Reportedly, the lighting on orbit is dim and suboptimal. The average brightness of the lights (given all lights within a node are operational) is 291 lux; by comparison, recommended office lighting ranges from 200 to 500 lux, and daylight ranges on a typical overcast day, consists of 10,000 to 25,000 lux. Representatives from NASA Behavioral Health and Performance Element (BHP) and Human Factors and Habitability identified that maintaining current brightness levels limits visual acuity, work space, and the use of light as a countermeasure for improving circadian entrainment, hastening phase shifting, evoking acute alertness and enhancing performance. Revised lighting specifications are therefore needed to optimize the replacement lights for the ISS.

  5. Patriarchal Hierarchies of Power and the Subordination of Women: Real Doll as a Replacement of Woman Figure

    ERIC Educational Resources Information Center

    Shokri, Natasha; Asl, Moussa Pourya

    2015-01-01

    The social structure of the family has always been in the state of transformation. In the past centuries, the nuclear family was replaced with a Patriarchal Family which lasted for only two centuries from 16th to the beginning of 18th century. In this new structure of the family, men were privileged to play the role of the master and the women…

  6. Aquarium Microbiome Response to Ninety-Percent System Water Change: Clues to Microbiome Management

    PubMed Central

    Van Bonn, William; LaPointe, Allen; Gibbons, Sean M.; Frazier, Angel; Hampton-Marcell, Jarrad; Gilbert, Jack

    2016-01-01

    The bacterial community composition and structure of water from an established teleost fish system was examined before, during and after a major water change to explore the impact of such a water-change disturbance on the stability of the aquarium water microbiome. The diversity and evenness of the bacterial community significantly increased following the 90% water replacement. While the change in bacterial community structure was significant, it was slight, and was also weakly correlated with changes in physicochemical parameters. Interestingly there was a significant shift in the correlative network relationships between operational taxonomic units from before to after the water replacement. We suggest this shift in network structure is due to the turnover of many taxa during the course of water replacement. These observations will inform future studies into manipulation of the microbiome by changing system environmental parameter values to optimize resident animal health. PMID:26031788

  7. Aquarium microbiome response to ninety-percent system water change: Clues to microbiome management.

    PubMed

    Van Bonn, William; LaPointe, Allen; Gibbons, Sean M; Frazier, Angel; Hampton-Marcell, Jarrad; Gilbert, Jack

    2015-01-01

    The bacterial community composition and structure of water from an established teleost fish system was examined before, during and after a major water change to explore the impact of such a water-change disturbance on the stability of the aquarium water microbiome. The diversity and evenness of the bacterial community significantly increased following the 90% water replacement. While the change in bacterial community structure was significant, it was slight, and was also weakly correlated with changes in physicochemical parameters. Interestingly there was a significant shift in the correlative network relationships between operational taxonomic units from before to after the water replacement. We suggest this shift in network structure is due to the turnover of many taxa during the course of water replacement. These observations will inform future studies into manipulation of the microbiome by changing system environmental parameter values to optimize resident animal health. © 2015 Wiley Periodicals, Inc.

  8. STRUCTURAL DETAILS AND SECTIONS OF MAIN PROCESSING BUILDING (CPP601). INL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STRUCTURAL DETAILS AND SECTIONS OF MAIN PROCESSING BUILDING (CPP-601). INL DRAWING NUMBER 200-0601-00-291-103079. ALTERNATE ID NUMBER 542-11-B-73. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  9. Uncertainty of Comparative Judgments and Multidimensional Structure

    ERIC Educational Resources Information Center

    Sjoberg, Lennart

    1975-01-01

    An analysis of preferences with respect to silhouette drawings of nude females is presented. Systematic intransitivities were discovered. The dispersions of differences (comparatal dispersons) were shown to reflect the multidimensional structure of the stimuli, a finding expected on the basis of prior work. (Author)

  10. Trends in Materials Science for Ligament Reconstruction.

    PubMed

    Sava, Oana Roxana; Sava, Daniel Florin; Radulescu, Marius; Albu, Madalina Georgiana; Ficai, Denisa; Veloz-Castillo, Maria Fernanda; Mendez-Rojas, Miguel Angel; Ficai, Anton

    2017-01-01

    The number of ligament injuries increases every year and concomitantly the need for materials or systems that can reconstruct the ligament. Limitations imposed by autografts and allografts in ligament reconstruction together with the advances in materials science and biology have attracted a lot of interest for developing systems and materials for ligament replacement or reconstruction. This review intends to synthesize the major steps taken in the development of polymer-based materials for anterior cruciate ligament, their advantages and drawbacks and the results of different in vitro and in vivo tests. Until present, there is no successful polymer system for ligament reconstruction implanted in humans. The developing field of synthetic polymers for ligament reconstruction still has a lot of potential. In addition, several nano-structured materials, made of nanofibers or in the form of ceramic/polymeric nanocomposites, are attracting the interest of several groups due to their potential use as engineered scaffolds that mimic the native environment of cells, increasing the chances for tissue regeneration. Here, we review the last 15 years of literature in order to obtain a better understanding on the state-of-the-art that includes the usage of nano- and poly-meric materials for ligament reconstruction, and to draw perspectives on the future development of the field. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  11. Catheter replacement structure in home medical care settings and regional characteristics in Tokyo and three adjoining prefectures.

    PubMed

    Kimura, Takuma; Yoshie, Satoru; Tsuchiya, Rumiko; Kawagoe, Shohei; Hirahara, Satoshi; Iijima, Katsuya; Akahoshi, Toru; Tsuji, Tetsuo

    2017-04-01

    The present study investigated the association between the structure of catheter replacement services in home medical care settings and regional characteristics. An anonymous self-administered questionnaire was carried out from August to September 2013. Participants were physicians from 5338 clinics that provided medical care services at home, and nurses from 1619 home-visit nursing stations in Tokyo and three adjoining prefectures. The questionnaire covered catheter replacement (gastrostomy tubes, nasogastric tubes, tracheal cannulas) during home medical care, and the professions of those who replaced urethral catheters for male and female patients. Regions were divided into two groups (higher- and lower-density regions) based on the number of clinics, number of home-visit nursing stations and the ratio of the population aged ≥65 years. The rates of respondents that reported catheter replacement was usually executed, and those who reported catheters were replaced by "physicians in principle" were compared between the groups. Responses were received from 842 clinics (16.3%) and 499 home-visit nursing stations (31.4%). In the higher-density regions, the rate of physicians who reported urethral catheters for male patients were replaced by "physicians in principle" was significantly higher than in the lower-density regions (P < 0.001). In the lower-density regions, the rate of nurses who reported urethral catheters for male patients were replaced by "nurses in principle" was significantly higher compared with the higher-density regions (P < 0.016). In home medical care settings, urethral catheters for male patients are replaced by nurses in regions where physician resources are limited. Geriatr Gerontol Int 2017; 17: 628-636. © 2016 Japan Geriatrics Society.

  12. Equilibrium simulations of proteins using molecular fragment replacement and NMR chemical shifts.

    PubMed

    Boomsma, Wouter; Tian, Pengfei; Frellsen, Jes; Ferkinghoff-Borg, Jesper; Hamelryck, Thomas; Lindorff-Larsen, Kresten; Vendruscolo, Michele

    2014-09-23

    Methods of protein structure determination based on NMR chemical shifts are becoming increasingly common. The most widely used approaches adopt the molecular fragment replacement strategy, in which structural fragments are repeatedly reassembled into different complete conformations in molecular simulations. Although these approaches are effective in generating individual structures consistent with the chemical shift data, they do not enable the sampling of the conformational space of proteins with correct statistical weights. Here, we present a method of molecular fragment replacement that makes it possible to perform equilibrium simulations of proteins, and hence to determine their free energy landscapes. This strategy is based on the encoding of the chemical shift information in a probabilistic model in Markov chain Monte Carlo simulations. First, we demonstrate that with this approach it is possible to fold proteins to their native states starting from extended structures. Second, we show that the method satisfies the detailed balance condition and hence it can be used to carry out an equilibrium sampling from the Boltzmann distribution corresponding to the force field used in the simulations. Third, by comparing the results of simulations carried out with and without chemical shift restraints we describe quantitatively the effects that these restraints have on the free energy landscapes of proteins. Taken together, these results demonstrate that the molecular fragment replacement strategy can be used in combination with chemical shift information to characterize not only the native structures of proteins but also their conformational fluctuations.

  13. [Examinations and exercises in medical technology utilizing a personal computer and the web].

    PubMed

    Niwa, Toshifumi

    2006-03-01

    The practice of e-learning in our department utilizing freeware without additional cost has been introduced: 1) Examinations and exercises are performed on the Web. Using the form-filling format of HTML, multiple-choice questions are asked. When the examinee submits the answers, the server will process the data using active server pages and send the result to the examinee with the score and explanations. So far, the students have given the Web examination (exercise) system a good evaluation. Concerning the effect of the explanations given in the Web exercises on the written test, some improvements were observed in the enumeration-type questions. On the other hand, no such improvements were clearly observed in the explanation-type questions, which require essential understanding of the principle. This suggests that effective utilization of the materials strongly depends on the students' eagerness to study. 2) To understand the chemical structures of body constituents, an exercise to draw structural formulae on the personal computer (PC) is performed. The students had difficulty in the fine control of arranging the whole shape of the formula, in addition to setting the format of characters such as super- and subscripts. In respect of understanding, they had significant difficulty in finding the structures and in distinguishing stereoisomers; however, the students had fun with the structure-drawing software and found it convenient to draw structures. These findings suggest that PC exercises will be attractive to students of the "PC generation", and thus helpful for the understanding of and training in data analysis in medical technology.

  14. Image processing for drawing recognition

    NASA Astrophysics Data System (ADS)

    Feyzkhanov, Rustem; Zhelavskaya, Irina

    2014-03-01

    The task of recognizing edges of rectangular structures is well known. Still, almost all of them work with static images and has no limit on work time. We propose application of conducting homography for the video stream which can be obtained from the webcam. We propose algorithm which can be successfully used for this kind of application. One of the main use cases of such application is recognition of drawings by person on the piece of paper before webcam.

  15. Experience of Teaching Drawing in German Schools by A. Ažbe and S. Hollósy (On the Example of the Image of Human Head)

    ERIC Educational Resources Information Center

    Melnikova, Svetlana

    2017-01-01

    The main aim of the paper is to analyze and disclose the methods for teaching drawing of the human head in foreign schools at the end of the 19th and beginning of the 20th centuries for further application in modern Russian methodology of art education. The relevance of the problem under investigation is due to the structuring and disclosure of…

  16. Slab replacement and dowel bar retrofit, district 11, San Diego County

    DOT National Transportation Integrated Search

    2002-01-01

    The project Resident Engineer requested that the Office of Rigid Pavement Materials and Structural Concrete examine cracking in replacement slabs and dowel bar retrofit installations on a project rehabilitating a section of Route 08 in District 11 ne...

  17. Transverse joint configuration development and testing for a modular bridge deck replacement system.

    DOT National Transportation Integrated Search

    2011-03-01

    According to the 2009 Report Card for Americas Infrastructure, one in four of the nations bridges are listed as : structurally deficient of functionally obsolete, establishing a dire need for new and innovative repair and replacement : techniqu...

  18. Structural evolutions and hereditary characteristics of icosahedral nano-clusters formed in Mg70Zn30 alloys during rapid solidification processes

    NASA Astrophysics Data System (ADS)

    Liang, Yong-Chao; Liu, Rang-Su; Xie, Quan; Tian, Ze-An; Mo, Yun-Fei; Zhang, Hai-Tao; Liu, Hai-Rong; Hou, Zhao-Yang; Zhou, Li-Li; Peng, Ping

    2017-02-01

    To investigate the structural evolution and hereditary mechanism of icosahedral nano-clusters formed during rapid solidification, a molecular dynamics (MD) simulation study has been performed for a system consisting of 107 atoms of liquid Mg70Zn30 alloy. Adopting Honeycutt-Anderson (HA) bond-type index method and cluster type index method (CTIM-3) to analyse the microstructures in the system it is found that for all the nano-clusters including 2~8 icosahedral clusters in the system, there are 62 kinds of geometrical structures, and those can be classified, by the configurations of the central atoms of basic clusters they contained, into four types: chain-like, triangle-tailed, quadrilateral-tailed and pyramidal-tailed. The evolution of icosahedral nano-clusters can be conducted by perfect heredity and replacement heredity, and the perfect heredity emerges when temperature is slightly less than Tm then increase rapidly and far exceeds the replacement heredity at Tg; while for the replacement heredity, there are three major modes: replaced by triangle (3-atoms), quadrangle (4-atoms) and pentagonal pyramid (6-atoms), rather than by single atom step by step during rapid solidification processes.

  19. Crystal structures of ASK1-inhibtor complexes provide a platform for structure-based drug design

    PubMed Central

    Singh, Onkar; Shillings, Anthony; Craggs, Peter; Wall, Ian; Rowland, Paul; Skarzynski, Tadeusz; Hobbs, Clare I; Hardwick, Phil; Tanner, Rob; Blunt, Michelle; Witty, David R; Smith, Kathrine J

    2013-01-01

    ASK1, a member of the MAPK Kinase Kinase family of proteins has been shown to play a key role in cancer, neurodegeneration and cardiovascular diseases and is emerging as a possible drug target. Here we describe a ‘replacement-soaking’ method that has enabled the high-throughput X-ray structure determination of ASK1/ligand complexes. Comparison of the X-ray structures of five ASK1/ligand complexes from 3 different chemotypes illustrates that the ASK1 ATP binding site is able to accommodate a range of chemical diversity and different binding modes. The replacement-soaking system is also able to tolerate some protein flexibility. This crystal system provides a robust platform for ASK1/ligand structure determination and future structure based drug design. PMID:23776076

  20. A multilevel layout algorithm for visualizing physical and genetic interaction networks, with emphasis on their modular organization

    PubMed Central

    2012-01-01

    Background Graph drawing is an integral part of many systems biology studies, enabling visual exploration and mining of large-scale biological networks. While a number of layout algorithms are available in popular network analysis platforms, such as Cytoscape, it remains poorly understood how well their solutions reflect the underlying biological processes that give rise to the network connectivity structure. Moreover, visualizations obtained using conventional layout algorithms, such as those based on the force-directed drawing approach, may become uninformative when applied to larger networks with dense or clustered connectivity structure. Methods We implemented a modified layout plug-in, named Multilevel Layout, which applies the conventional layout algorithms within a multilevel optimization framework to better capture the hierarchical modularity of many biological networks. Using a wide variety of real life biological networks, we carried out a systematic evaluation of the method in comparison with other layout algorithms in Cytoscape. Results The multilevel approach provided both biologically relevant and visually pleasant layout solutions in most network types, hence complementing the layout options available in Cytoscape. In particular, it could improve drawing of large-scale networks of yeast genetic interactions and human physical interactions. In more general terms, the biological evaluation framework developed here enables one to assess the layout solutions from any existing or future graph drawing algorithm as well as to optimize their performance for a given network type or structure. Conclusions By making use of the multilevel modular organization when visualizing biological networks, together with the biological evaluation of the layout solutions, one can generate convenient visualizations for many network biology applications. PMID:22448851

  1. Line drawing extraction from gray level images by feature integration

    NASA Astrophysics Data System (ADS)

    Yoo, Hoi J.; Crevier, Daniel; Lepage, Richard; Myler, Harley R.

    1994-10-01

    We describe procedures that extract line drawings from digitized gray level images, without use of domain knowledge, by modeling preattentive and perceptual organization functions of the human visual system. First, edge points are identified by standard low-level processing, based on the Canny edge operator. Edge points are then linked into single-pixel thick straight- line segments and circular arcs: this operation serves to both filter out isolated and highly irregular segments, and to lump the remaining points into a smaller number of structures for manipulation by later stages of processing. The next stages consist in linking the segments into a set of closed boundaries, which is the system's definition of a line drawing. According to the principles of Gestalt psychology, closure allows us to organize the world by filling in the gaps in a visual stimulation so as to perceive whole objects instead of disjoint parts. To achieve such closure, the system selects particular features or combinations of features by methods akin to those of preattentive processing in humans: features include gaps, pairs of straight or curved parallel lines, L- and T-junctions, pairs of symmetrical lines, and the orientation and length of single lines. These preattentive features are grouped into higher-level structures according to the principles of proximity, similarity, closure, symmetry, and feature conjunction. Achieving closure may require supplying missing segments linking contour concavities. Choices are made between competing structures on the basis of their overall compliance with the principles of closure and symmetry. Results include clean line drawings of curvilinear manufactured objects. The procedures described are part of a system called VITREO (viewpoint-independent 3-D recognition and extraction of objects).

  2. MyChemise: A 2D drawing program that uses morphing for visualisation purposes

    PubMed Central

    2011-01-01

    MyChemise (My Chemical Structure Editor) is a new 2D structure editor. It is designed as a Java applet that enables the direct creation of structures in the Internet using a web browser. MyChemise saves files in a digital format (.cse) and the import and export of .mol files using the appropriate connection tables is also possible. MyChemise is available as a free online version in English and German. The MyChemise GUI is designed to be user friendly and can be used intuitively. There is also an English and German program description available as a PDF file. In addition to the known ways of drawing chemical structure formulas, there are also parts implemented in the program that allow the creation of different types of presentation. The morphing module uses this technology as a component for dynamic visualisation. For example, it enables a clear and simple illustration of molecule vibrations and reaction sequences. PMID:22152022

  3. Recombinant spider silk from aqueous solutions via a bio-inspired microfluidic chip

    NASA Astrophysics Data System (ADS)

    Peng, Qingfa; Zhang, Yaopeng; Lu, Li; Shao, Huili; Qin, Kankan; Hu, Xuechao; Xia, Xiaoxia

    2016-11-01

    Spiders achieve superior silk fibres by controlling the molecular assembly of silk proteins and the hierarchical structure of fibres. However, current wet-spinning process for recombinant spidroins oversimplifies the natural spinning process. Here, water-soluble recombinant spider dragline silk protein (with a low molecular weight of 47 kDa) was adopted to prepare aqueous spinning dope. Artificial spider silks were spun via microfluidic wet-spinning, using a continuous post-spin drawing process (WS-PSD). By mimicking the natural spinning apparatus, shearing and elongational sections were integrated in the microfluidic spinning chip to induce assembly, orientation of spidroins, and fibril structure formation. The additional post-spin drawing process following the wet-spinning section partially mimics the spinning process of natural spider silk and substantially contributes to the compact aggregation of microfibrils. Subsequent post-stretching further improves the hierarchical structure of the fibres, including the crystalline structure, orientation, and fibril melting. The tensile strength and elongation of post-treated fibres reached up to 510 MPa and 15%, respectively.

  4. Side draw control design for a high purity multi-component distillation column.

    PubMed

    A Udugama, Isuru; Munir, M T; Kirkpatrick, Rob; Young, Brent R; Yu, Wei

    2018-05-01

    Industrial methanol production involves a multi component feed containing methanol, water and trace levels of ethanol being refined to produce AA grade methanol at high product recovery. Due to practical constraints, the bottoms discharge of the column is primarily water with only trace of methanol impurities. As a result of these constraints, ethanol, which is a non-key middle boiling component gets "trapped" near the side draw of the column forming an ethanol bulge, which in turn results in non-linear, inverse, time and state varying behaviour of the side draw ethanol composition. In this work, we established that the existence of the ethanol bulge creates the complex process behaviour of the side draw ethanol composition and that this bulge needs to be explicitly controlled. This type of explicit composition bulge analysis and subsequent control has not been attempted on methanol distillation columns before. For this purpose a novel, robust and practical side draw control scheme to detect and remedy the excess ethanol bulge movement using override control is presented. The side draw controller, together with other regulatory controllers is shown to maintain on-specification operations of the column. Disturbance rejection tests carried out illustrate that the side draw control scheme will keep the column operating within commercial specification. It is also shown that a traditional DV control structure is unable to achieve this objective. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

  5. Crew interface specifications preparation for in-flight maintenance and stowage functions

    NASA Technical Reports Server (NTRS)

    Parker, F. W.; Carlton, B. E.

    1972-01-01

    The findings and data products developed during the Phase 2 crew interface specification study are presented. Five new NASA general specifications were prepared: operations location coding system for crew interfaces; loose equipment and stowage management requirements; loose equipment and stowage data base information requirements; spacecraft loose equipment stowage drawing requirements; and inflight stowage management data requirements. Additional data was developed defining inflight maintenance processes and related data concepts for inflight troubleshooting, remove/repair/replace and scheduled maintenance activities. The process of maintenance task and equipment definition during spacecraft design and development was also defined and related data concepts were identified for futher development into formal NASA specifications during future follow-on study phases of the contract.

  6. Clinical results of computerized tomography-based simulation with laser patient marking.

    PubMed

    Ragan, D P; Forman, J D; He, T; Mesina, C F

    1996-02-01

    Accuracy of a patient treatment portal marking device and computerized tomography (CT) simulation have been clinically tested. A CT-based simulator has been assembled based on a commercial CT scanner. This includes visualization software and a computer-controlled laser drawing device. This laser drawing device is used to transfer the setup, central axis, and/or radiation portals from the CT simulator to the patient for appropriate patient skin marking. A protocol for clinical testing is reported. Twenty-five prospectively, sequentially accessioned patients have been analyzed. The simulation process can be completed in an average time of 62 min. Under many cases, the treatment portals can be designed and the patient marked in one session. Mechanical accuracy of the system was found to be within +/- 1mm. The portal projection accuracy in clinical cases is observed to be better than +/- 1.2 mm. Operating costs are equivalent to the conventional simulation process it replaces. Computed tomography simulation is a clinical accurate substitute for conventional simulation when used with an appropriate patient marking system and digitally reconstructed radiographs. Personnel time spent in CT simulation is equivalent to time in conventional simulation.

  7. Climatically-mediated landcover change: impacts on Brazilian territory.

    PubMed

    Zanin, Marina; Tessarolo, Geiziane; Machado, Nathália; Albernaz, Ana Luisa M

    2017-01-01

    In the face of climate change threats, governments are drawing attention to policies for mitigating its effects on biodiversity. However, the lack of distribution data makes predictions at species level a difficult task, mainly in regions of higher biodiversity. To overcome this problem, we use native landcover as a surrogate biodiversity, because it can represent specialized habitat for species, and investigate the effects of future climate change on Brazilian biomes. We characterize the climatic niches of native landcover and use ecological niche modeling to predict the potential distribution under current and future climate scenarios. Our results highlight expansion of the distribution of open vegetation and the contraction of closed forests. Drier Brazilian biomes, like Caatinga and Cerrado, are predicted to expand their distributions, being the most resistant to climate change impacts. However, these would also be affected by losses of their closed forest enclaves and their habitat-specific or endemic species. Replacement by open vegetation and overall reductions are a considerable risk for closed forest, threatening Amazon and Atlantic forest biomes. Here, we evidence the impacts of climate change on Brazilian biomes, and draw attention to the necessity for management and attenuation plans to guarantee the future of Brazilian biodiversity.

  8. Rural maternity care: can we learn from Wal-Mart?

    PubMed

    van Teijlingen, E R; Pitchforth, E

    2010-03-01

    In many countries rural maternity care is under threat. Consequently rural pregnant women will have to travel further to attend larger maternity units to receive care and deliver their babies. This trend is not dissimilar from the disappearance of other rural services, such as village shops, banks, post offices and bus services. We use a comparative approach to draw an analogy with large-scale supermarkets, such as the Wal-Mart and Tesco and their effect on the viability of smaller rural shops, depersonalisation of service and the wider community. The closure of a community-maternity unit leads to women attending a different type of hospital with a different approach to maternity care. Thus small community-midwifery units are being replaced, not by a very similar unit that happens to be further away, but by a larger obstetric unit that operates on different models, philosophy and notions of risk. Comparative analysis allows a fresh perspective on the provision of rural maternity services. We argue that previous discussions focusing on medicalisation and change in maternity services can be enhanced by drawing on experience in other sectors and taking a wider societal lens. Copyright 2009 Elsevier Ltd. All rights reserved.

  9. Students' Understanding of Primary and Secondary Protein Structure: Drawing Secondary Protein Structure Reveals Student Understanding Better than Simple Recognition of Structures

    ERIC Educational Resources Information Center

    Harle, Marissa; Towns, Marcy H.

    2013-01-01

    The interdisciplinary nature of biochemistry courses requires students to use both chemistry and biology knowledge to understand biochemical concepts. Research that has focused on external representations in biochemistry has uncovered student difficulties in comprehending and interpreting external representations in addition to a fragmented…

  10. Enthalpy Costs of Making and Breaking Bonds: A Game of Generating Molecules with Proper Lewis Structures

    ERIC Educational Resources Information Center

    Bell, Peter T.; Adkins, Alyssa D.; Gamble, Rex J.; Schultz, Linda D.

    2009-01-01

    "Enthalpy Costs" is a simple card game created to assist students in developing proper Lewis structure drawing skills. Score keeping is accomplished by tracking the enthalpy changes associated with bond-making and bond-breaking processes during formation of molecules represented by proper Lewis structures. Playing the game requires the student to…

  11. The influence of the structure of the metal load removal from liquid steel in electric arc furnaces

    NASA Astrophysics Data System (ADS)

    Pǎcurar, Cristina; Hepuť, Teodor; Crisan, Eugen

    2016-06-01

    One of the main technical and economic indicators in the steel industry and steel respectively the development it is the removal of liquid steel. This indicator depends on several factors, namely technology: the structure and the quality metal load, the degree of preparedness of it, and the content of non-metallic material accompanying the unit of drawing up, the technology for the elaboration, etc. research has been taken into account in drawing up steel electric arc furnace type spring EBT (Electric Bottom taping), seeking to load and removing components of liquid steel. Metal load has been composed of eight metal grades, in some cases with great differences in terms of quality. Data obtained were processed in the EXCEL spreadsheet programs and MATLAB, the results obtained being presented both graphically and analytically. On the basis of the results obtained may opt for a load optimal structure metal.

  12. Approaches to ab initio molecular replacement of α-helical transmembrane proteins.

    PubMed

    Thomas, Jens M H; Simkovic, Felix; Keegan, Ronan; Mayans, Olga; Zhang, Chengxin; Zhang, Yang; Rigden, Daniel J

    2017-12-01

    α-Helical transmembrane proteins are a ubiquitous and important class of proteins, but present difficulties for crystallographic structure solution. Here, the effectiveness of the AMPLE molecular replacement pipeline in solving α-helical transmembrane-protein structures is assessed using a small library of eight ideal helices, as well as search models derived from ab initio models generated both with and without evolutionary contact information. The ideal helices prove to be surprisingly effective at solving higher resolution structures, but ab initio-derived search models are able to solve structures that could not be solved with the ideal helices. The addition of evolutionary contact information results in a marked improvement in the modelling and makes additional solutions possible.

  13. Drawing simulation by static implicit analysis with the artificial damping method

    NASA Astrophysics Data System (ADS)

    Oide, K.; Mihara, Y.; Kobayashi, T.; Takizawa, H.; Amaishi, T.; Umezu, Y.

    2016-08-01

    Wrinkling during draw is typically a local instability problem. When the structural instability is localized, there will be a local transfer of strain energy from one part of the structure to neighboring parts, and global solution methods, which is typically represented by the arc length method, may not work. So, this type of problems has to be solved either dynamically or with the artificial damping. On the other hand, the essential nature of the buckling behavior can be regarded as a static problem, even though it may be possible to raise some side issues due to the inertia effect. In this study, we traced the local buckling behavior of anisotropic elasto-plastic thin shells in Numisheet2014 BM4 using the artificial damping method.

  14. Using a 3D CAD plant model to simplify process hazard reviews

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tolpa, G.

    A Hazard and Operability (HAZOP) review is a formal predictive procedure used to identify potential hazard and operability problems associated with certain processes and facilities. The HAZOP procedure takes place several times during the life cycle of the facility. Replacing plastic models, layout and detail drawings with a 3D CAD electronic model, provides access to process safety information and a detailed level of plant topology that approaches the visualization capability of the imagination. This paper describes the process that is used for adding the use of a 3D CAD model to flowsheets and proven computer programs for the conduct ofmore » hazard and operability reviews. Using flowsheets and study nodes as a road map for the review the need for layout and other detail drawings is all but eliminated. Using the 3D CAD model again for a post-P and ID HAZOP supports conformance to layout and safety requirements, provides superior visualization of the plant configuration and preserves the owners equity in the design. The response from the review teams are overwhelmingly in favor of this type of review over a review that uses only drawings. Over the long term the plant model serves more than just process hazards analysis. Ongoing use of the model can satisfy the required access to process safety information, OHSA documentation and other legal requirements. In this paper extensive instructions address the logic for the process hazards analysis and the preparation required to assist anyone who wishes to add the use of a 3D model to their review.« less

  15. La 3+ doping of the Sr 2CoWO 6 double perovskite: A structural and magnetic study

    NASA Astrophysics Data System (ADS)

    López, C. A.; Viola, M. C.; Pedregosa, J. C.; Carbonio, R. E.; Sánchez, R. D.; Fernández-Díaz, M. T.

    2008-11-01

    La-doped Sr 2CoWO 6 double perovskites have been prepared in air in polycrystalline form by solid-state reaction. These materials have been studied by X-ray powder diffraction (XRPD), neutron powder diffraction (NPD) and magnetic susceptibility. The structural refinement was performed from combined XRPD and NPD data (D2B instrument, λ=1.594 Å). At room temperature, the replacement of Sr 2+ by La 3+ induces a change of the tetragonal structure, space group I4/ m of the undoped Sr 2CoWO 6 into the distorted monoclinic crystal structure, space group P2 1/ n, Z=2. The structure of La-doped phases contains alternating CoO 6 and (Co/W)O 6 octahedra, almost fully ordered. On the other hand, the replacement of Sr 2+ by La 3+ induces a partial replacement of W 6+ by Co 2+ into the B sites, i.e. Sr 2-xLa xCoW 1-yCo yO 6 ( y= x/4) with segregation of SrWO 4. Magnetic and neutron diffraction measurements indicate an antiferromagnetic ordering below TN=24 K independently of the La-substitution.

  16. Household Structure, Coupling Constraints, and the Nonpartner Victimization Risks of Adults

    ERIC Educational Resources Information Center

    Yule, Carolyn; Griffiths, Elizabeth

    2009-01-01

    Victimization studies consistently find that household structure influences the risk of personal and property victimization among adult household members, with those in "traditional" homes enjoying the most protection from victimization and lone parents experiencing the greatest vulnerability. Drawing on the concept of "coupling…

  17. Dipolar-dephasing 13C NMR studies of decomposed wood and coalified xylem tissue: Evidence for chemical structural changes associated with defunctionalization of lignin structural units during coalification

    USGS Publications Warehouse

    Hatcher, P.G.

    1988-01-01

    A series of decomposed and coalified gymnosperm woods was examined by conventional solid-state 13C nuclear magnetic resonance (NMR) and by dipolar-dephasing NMR techniques. The results of these NMR studies for a histologically related series of samples provide clues as to the nature of codification reactions that lead to the defunctionalization of lignin-derived aromatic structures. These reactions sequentially involve the following: (1) loss of methoxyl carbons from guaiacyl structural units with replacement by hydroxyls and increased condensation; (2) loss of hydroxyls or aryl ethers with replacement by hydrogen as rank increases from lignin to high-volatile bituminous coal; (3) loss of alkyl groups with continued replacement by hydrogen. The dipolar-dephasing data show that the early stages of coalification in samples examined (lignin to lignite) involve a decreasing degree of protonation on aromatic rings and suggest that condensation is significant during coalification at this early stage. An increasing degree of protonation on aromatic rings is observed as the rank of the sample increases from lignite to anthracite.

  18. Process Simulation of Aluminium Sheet Metal Deep Drawing at Elevated Temperatures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Winklhofer, Johannes; Trattnig, Gernot; Lind, Christoph

    Lightweight design is essential for an economic and environmentally friendly vehicle. Aluminium sheet metal is well known for its ability to improve the strength to weight ratio of lightweight structures. One disadvantage of aluminium is that it is less formable than steel. Therefore complex part geometries can only be realized by expensive multi-step production processes. One method for overcoming this disadvantage is deep drawing at elevated temperatures. In this way the formability of aluminium sheet metal can be improved significantly, and the number of necessary production steps can thereby be reduced. This paper introduces deep drawing of aluminium sheet metalmore » at elevated temperatures, a corresponding simulation method, a characteristic process and its optimization. The temperature and strain rate dependent material properties of a 5xxx series alloy and their modelling are discussed. A three dimensional thermomechanically coupled finite element deep drawing simulation model and its validation are presented. Based on the validated simulation model an optimised process strategy regarding formability, time and cost is introduced.« less

  19. A Picture is Worth a Thousand Words: Art and Medicine.

    PubMed

    Dahan, Shani; Shoenfeld, Yehuda

    2017-12-01

    Medical practice is a form of art, with each complex detail essential to the welfare of the individuals in the care of the physician. Art and medicine have shared a close relationship in a variety of ways for centuries, as demonstrated by anatomical drawings and textbooks from the 16th century. Leonardo da Vinci, driven by his fascination with the details of the human body and how it functioned, succeeded in creating an anatomical model of the cerebral ventricles and the aorta using molten wax and a glass structure, respectively (Heart and Its Blood Vessels). By using water that contained grass seeds, this experiment enabled him to study blood flow. da Vinci's engrossment with the complexity of the human body is reflected in many of his drawings, including the famous depiction of the human physique in his drawing of the Vitruvian Man. This drawing, which defines the ideal proportions of the human body and their correlation with geometry, is an example of how artistic and scientific objectives integrate with each other.

  20. Drawings of very preterm-born children at 5 years of age: a first impression of cognitive and motor development?

    PubMed

    Schepers, Sasja; Deković, Maja; Feltzer, Max; de Kleine, Martin; van Baar, Anneloes

    2012-01-01

    The aim of this study was to examine differences in drawing skills between very preterm and term children, and to determine whether very preterm children's cognitive and motor development is reflected in the draw-a-person test (DAP) at age 5. Seventy-two very preterm children (birth weight <1,500 g and/or gestational age <32 weeks) and 60 term children at 5 years of age were compared on the DAP. Cognitive and motor skills of the very preterm children had been assessed four times, at 1/2, 1, 2, and 5 years of age. Very preterm children showed a developmental delay in drawing ability. Structural equation modeling revealed a positive relation between both cognitive as well as motor development and the DAP. The DAP could be a crude parameter for evaluating cognitive and motor deficits of very preterm children. A worrisome result should be followed by more standardized tests measuring cognitive and motor skills.

  1. Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds.

    PubMed

    Mondschein, Ryan J; Kanitkar, Akanksha; Williams, Christopher B; Verbridge, Scott S; Long, Timothy E

    2017-09-01

    This review highlights the synthesis, properties, and advanced applications of synthetic and natural polymers 3D printed using stereolithography for soft tissue engineering applications. Soft tissue scaffolds are of great interest due to the number of musculoskeletal, cardiovascular, and connective tissue injuries and replacements humans face each year. Accurately replacing or repairing these tissues is challenging due to the variation in size, shape, and strength of different types of soft tissue. With advancing processing techniques such as stereolithography, control of scaffold resolution down to the μm scale is achievable along with the ability to customize each fabricated scaffold to match the targeted replacement tissue. Matching the advanced manufacturing technique to polymer properties as well as maintaining the proper chemical, biological, and mechanical properties for tissue replacement is extremely challenging. This review discusses the design of polymers with tailored structure, architecture, and functionality for stereolithography, while maintaining chemical, biological, and mechanical properties to mimic a broad range of soft tissue types. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. A systematic review of the relationship between subchondral bone features, pain and structural pathology in peripheral joint osteoarthritis.

    PubMed

    Barr, Andrew J; Campbell, T Mark; Hopkinson, Devan; Kingsbury, Sarah R; Bowes, Mike A; Conaghan, Philip G

    2015-08-25

    Bone is an integral part of the osteoarthritis (OA) process. We conducted a systematic literature review in order to understand the relationship between non-conventional radiographic imaging of subchondral bone, pain, structural pathology and joint replacement in peripheral joint OA. A search of the Medline, EMBASE and Cochrane library databases was performed for original articles reporting association between non-conventional radiographic imaging-assessed subchondral bone pathologies and joint replacement, pain or structural progression in knee, hip, hand, ankle and foot OA. Each association was qualitatively characterised by a synthesis of the data from each analysis based upon study design, adequacy of covariate adjustment and quality scoring. In total 2456 abstracts were screened and 139 papers were included (70 cross-sectional, 71 longitudinal analyses; 116 knee, 15 hip, six hand, two ankle and involved 113 MRI, eight DXA, four CT, eight scintigraphic and eight 2D shape analyses). BMLs, osteophytes and bone shape were independently associated with structural progression or joint replacement. BMLs and bone shape were independently associated with longitudinal change in pain and incident frequent knee pain respectively. Subchondral bone features have independent associations with structural progression, pain and joint replacement in peripheral OA in the hip and hand but especially in the knee. For peripheral OA sites other than the knee, there are fewer associations and independent associations of bone pathologies with these important OA outcomes which may reflect fewer studies; for example the foot and ankle were poorly studied. Subchondral OA bone appears to be a relevant therapeutic target. PROSPERO registration number: CRD 42013005009.

  3. NASA Tech Briefs, March 2011

    NASA Technical Reports Server (NTRS)

    2011-01-01

    Topics covered include: Optimal Tuner Selection for Kalman-Filter-Based Aircraft Engine Performance Estimation; Airborne Radar Interferometric Repeat-Pass Processing; Plug-and-Play Environmental Monitoring Spacecraft Subsystem; Power-Combined GaN Amplifier with 2.28-W Output Power at 87 GHz; Wallops Ship Surveillance System; Source Lines Counter (SLiC) Version 4.0; Guidance, Navigation, and Control Program; Single-Frame Terrain Mapping Software for Robotic Vehicles; Auto Draw from Excel Input Files; Observation Scheduling System; CFDP for Interplanetary Overlay Network; X-Windows Widget for Image Display; Binary-Signal Recovery; Volumetric 3D Display System with Static Screen; MMIC Replacement for Gunn Diode Oscillators; Feature Acquisition with Imbalanced Training Data; Mount Protects Thin-Walled Glass or Ceramic Tubes from Large Thermal and Vibration Loads; Carbon Nanotube-Based Structural Health Monitoring Sensors; Wireless Inductive Power Device Suppresses Blade Vibrations; Safe, Advanced, Adaptable Isolation System Eliminates the Need for Critical Lifts; Anti-Rotation Device Releasable by Insertion of a Tool; A Magnetically Coupled Cryogenic Pump; Single Piezo-Actuator Rotary-Hammering Drill; Fire-Retardant Polymeric Additives; Catalytic Generation of Lift Gases for Balloons; Ionic Liquids to Replace Hydrazine; Variable Emittance Electrochromics Using Ionic Electrolytes and Low Solar Absorptance Coatings; Spacecraft Radiator Freeze Protection Using a Regenerative Heat Exchanger; Multi-Mission Power Analysis Tool; Correction for Self-Heating When Using Thermometers as Heaters in Precision Control Applications; Gravitational Wave Detection with Single-Laser Atom Interferometers; Titanium Alloy Strong Back for IXO Mirror Segments; Improved Ambient Pressure Pyroelectric Ion Source; Multi-Modal Image Registration and Matching for Localization of a Balloon on Titan; Entanglement in Quantum-Classical Hybrid; Algorithm for Autonomous Landing; Quantum-Classical Hybrid for Information Processing; Small-Scale Dissipation in Binary-Species Transitional Mixing Layers; Superpixel-Augmented Endmember Detection for Hyperspectral Images; Coding for Parallel Links to Maximize the Expected Value of Decodable Messages; and Microwave Tissue Soldering for Immediate Wound Closure.

  4. Mixed methods evaluation of the Getting it Right First Time programme - improvements to NHS orthopaedic care in England: study protocol.

    PubMed

    Barratt, Helen; Turner, Simon; Hutchings, Andrew; Pizzo, Elena; Hudson, Emma; Briggs, Tim; Hurd, Rob; Day, Jamie; Yates, Rachel; Gikas, Panagiotis; Morris, Stephen; Fulop, Naomi J; Raine, Rosalind

    2017-01-23

    Orthopaedic procedures, such as total hip replacement and total knee replacement, are among the commonest surgical procedures in England. The Getting it Right First Time project (GIRFT) aims to deliver improvements in quality and reductions in the cost of NHS orthopaedic care across the country. We will examine whether the planned changes have delivered improvements in the quality of care and patient outcomes. We will also study the processes involved in developing and implementing changes to care, and professional and organisational factors influencing these processes. In doing so, we will identify lessons to guide future improvement work in other services. We will evaluate the implementation of the GIRFT programme, and its impact on outcomes and cost, using a mixed methods design. Qualitative methods will be used to understand the programme theory underlying the approach and study the effect of the intervention on practice, using a case study approach. This will include an analysis of the central GIRFT programme and local provider responses. Data will be collected via semi-structured interviews, non-participant observation, and documentary analysis. Quantitative methods will be used to examine 'what works and at what cost?' We will also conduct focus groups with patients and members of the public to explore their perceptions of the GIRFT programme. The research will draw on theories of adoption, diffusion, and sustainability of innovation; its characteristics; and contextual factors at provider-level that influence implementation. We will identify generalisable lessons to inform the organisation and delivery of future improvement programmes, to optimise their implementation and impact, both within the UK and internationally. Potential challenges involved in conducting the evaluation include the phased implementation of the intervention in different provider organisations; the inclusion of both retrospective and prospective components; and the effects of ongoing organisational turbulence in the English NHS. However, these issues reflect the realities of service change and its evaluation.

  5. Structural and functional perspectives on classification and seriation in psychotic and normal children.

    PubMed

    Breslow, L; Cowan, P A

    1984-02-01

    This study describes a strategy for examining cognitive functioning in psychotic and normal children without the usual confounding effects of marked differences in cognitive structure that occur when children of the same age are compared. Participants were 14 psychotic children, 12 males and 2 females, mean age 9-2, matched with normal children at preoperational and concrete operational stage levels on a set of Piagetian classification tasks. The mean age of the normal children was 6-4, replicating the usually found developmental delay in psychotic samples. Participants were then compared on both structural level and functional abilities on a set of tasks involving seriation of sticks; the higher-level children were also administered a seriation drawing task. Analysis of children's processes of seriating and seriation drawings indicated that over and above the structural retardation, psychotic children at all levels showed functional deficits, especially in the use of anticipatory imagery. The implications for general developmental theory are that progress in structural development is not sufficient for imaginal development, and that structural development of logical concepts is relatively independent of the development of imagery. It was suggested that "thought disorder" may not be a disordered structure of thinking or a retardation in psychotic populations but rather a mismatch between higher-level logical structures and lower-level functions.

  6. The Ideal Worker or the Ideal Father: Organizational Structures and Culture in the Gendered University

    ERIC Educational Resources Information Center

    Sallee, Margaret W.

    2012-01-01

    While literature has focused on the ways in which organizational structures exclude women from the workplace, this article suggests that the inverse is also true: organizational structures and culture prevent men from being involved in the home. Using theories of gendered organizations as a guide, this article draws on interviews with 70 faculty…

  7. Filling temporary underground structures and workings at high-head hydro developments

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ilyushin, V.F.

    1994-12-01

    Examples of backfilling temporary underground structures and workings at hydroelectric stations in Russia are cited. Structures backfilled include temporary tunnels and auxiliary workings (shafts, chambers, etc.). Detail drawings illustrate many of the examples. Examples of backfilling at a number of hydropower plants are given; however, the main emphasis is on construction of Nurek Hydroelectric Station. 8 refs., 11 figs.

  8. Family Structure Instability and the Educational Persistence of Young People in England

    ERIC Educational Resources Information Center

    Hampden-Thompson, Gillian; Galindo, Claudia

    2015-01-01

    Research in the area of family structure and educational outcomes has often failed to account for instability in family structure. Furthermore, prior research in this area has been dominated by North American studies with a smaller body emerging from Europe. This study draws upon 10,783 young people and their parents from the Longitudinal Study of…

  9. Selective hydrodechlorination of 1,2-dichloroethane catalyzed by trace Pd decorated Ag/Al2O3 catalysts prepared by galvanic replacement

    NASA Astrophysics Data System (ADS)

    Sun, Jingya; Han, Yuxiang; Fu, Heyun; Wan, Haiqin; Xu, Zhaoyi; Zheng, Shourong

    2018-01-01

    Ag catalysts decorated by trace Pd supported on γ-Al2O3 with different structure and chemical properties were prepared using a combined impregnation and galvanic replacement method. For comparison, monometallic Ag/γ-Al2O3 and Pd/γ-Al2O3 catalysts were prepared using the impregnation method. Gas-phase catalytic hydrodechlorination of 1,2-dichloroethane to ethylene was investigated on those catalysts. The structures and chemical compositions of bimetallic Pd-Ag particles in the catalysts were controlled by adjusting Pd replacement amount. The as-prepared catalysts were characterized by X-ray diffraction, transmission electron microscopy, UV-vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, and in-situ FTIR spectroscopy of CO adsorption. The results demonstrated that contiguous Pd sites dominated in the monometallic Pd/γ-Al2O3 catalyst, while Pd atoms were separately decorated on the surface of Ag particles in the bimetallic Pd-Ag/γ-Al2O3 catalysts when Pd replacement amount was below 0.30 wt.%. At Pd replacement amount of 0.30 wt.%, Pd ensembles with contiguous Pd sites developed in the bimetallic catalyst. Thus, monometallic Pd/γ-Al2O3 catalyst displayed negligible ethylene selectivity toward the catalytic hydrodechlorination of 1,2-dichloroethane, while bimetallic Pd-Ag/γ-Al2O3 catalyst with a Pd replacement amount of 0.13 wt.% exhibited 94.6% of ethylene selectivity. Furthermore, selectivity to incompletely dechlorinated byproduct chloroethylene decreased with Pd replacement amount, due to the enhanced decoration effect of Pd on large Ag ensembles. Findings in this work provide a promising bimetallic catalyst prepared by galvanic replacement for the selective catalytic hydrodechlorination of 1,2-dichloroethane.

  10. Structure, attachment, replacement and growth of teeth in bluefish, Pomatomus saltatrix (Linnaeus, 1776), a teleost with deeply socketed teeth.

    PubMed

    Bemis, William E; Giuliano, Anne; McGuire, Betty

    2005-01-01

    Tooth replacement poses many questions about development, pattern formation, tooth attachment mechanisms, functional morphology and the evolution of vertebrate dentitions. Although most vertebrate species have polyphyodont dentitions, detailed knowledge of tooth structure and replacement is poor for most groups, particularly actinopterygians. We examined the oral dentition of the bluefish, Pomatomus saltatrix, a pelagic and coastal marine predator, using a sample of 50 individuals. The oral teeth are located on the dentary and premaxillary bones, and we scored each tooth locus in the dentary and premaxillary bones using a four-part functional classification: absent (A), incoming (I), functional (F=fully ankylosed) or eroding (E). The homodont oral teeth of Pomatomus are sharp, deeply socketed and firmly ankylosed to the bone of attachment. Replacement is intraosseus and occurs in alternate tooth loci with long waves of replacement passing from rear to front. The much higher percentage of functional as opposed to eroding teeth suggests that replacement rates are low but that individual teeth are quickly lost once erosion begins. Tooth number increases ontogenetically, ranging from 15-31 dentary teeth and 15-39 premaxillary teeth in the sample studied. Teeth increase in size with every replacement cycle. Remodeling of the attachment bone occurs continuously to accommodate growth. New tooth germs originate from a discontinuous dental lamina and migrate from the lingual (dentary) or labial (premaxillary) epithelium through pores in the bone of attachment into the resorption spaces beneath the existing teeth. Pomatomus shares unique aspects of tooth replacement with barracudas and other scombroids and this supports the interpretation that Pomatomus is more closely related to scombroids than to carangoids.

  11. Development of Facilities for an Ocean Engineering Laboratory. Final Report.

    ERIC Educational Resources Information Center

    Nash, W. A.; And Others

    A collection of seven laboratory facilities and processes dedicated to improving student understanding of the fundamental concepts associated with the structural mechanics of oceanic structures is described. Complete working drawings covering all mechanical and electrical aspects of these systems are presented so that the systems may be reproduced…

  12. Neighborhood Structural Inequality, Collective Efficacy, and Sexual Risk Behavior among Urban Youth

    ERIC Educational Resources Information Center

    Browning, Christopher R.; Burrington, Lori A.; Leventhal, Tama; Brooks-Gunn, Jeanne

    2008-01-01

    We draw on collective efficacy theory to extend a contextual model of early adolescent sexual behavior. Specifically, we hypothesize that neighborhood structural disadvantage--as measured by levels of concentrated poverty, residential instability, and aspects of immigrant concentration--and diminished collective efficacy have consequences for the…

  13. Adaptive Instructional Aids for Teaching a Blind Student in a Nonmajors College Chemistry Course

    ERIC Educational Resources Information Center

    Boyd-Kimball, Debra

    2012-01-01

    Adaptive tools and techniques for lecture instruction were developed for a blind student in a nonmajors college chemistry course. These adaptive instructional aids assisted the student in writing and balancing chemical reactions, calculating unit conversions and concentrations, drawing Lewis dot structures, understanding structural representations…

  14. A Framework for Chaos Theory Career Counselling

    ERIC Educational Resources Information Center

    Pryor, Robert G. L.

    2010-01-01

    Theory in career development counselling provides a map that counsellors can use to understand and structure the career counselling process. It also provides a means to communicate this understanding and structuring to their clients as part of the counselling intervention. The chaos theory of careers draws attention to the complexity,…

  15. Technology Underutilized: Principal's Role in Creating a Culture of High-Level Uses

    ERIC Educational Resources Information Center

    Foley, Darlene

    2017-01-01

    Teachers need to maximize technology to support student learning by drawing upon varying pedagogical orientations; however, teacher-centered, highly structured approaches that foster low-level thinking is more prevalent. Although highly structured approaches help develop students' foundational skills and content knowledge, student-centered,…

  16. Going off Script: Structure and Agency in Individualized Education Program Meetings

    ERIC Educational Resources Information Center

    Bray, Laura E.; Russell, Jennifer Lin

    2016-01-01

    In this comparative case study, we draw from neoinstitutional and structuration theory to examine the individualized education program (IEP) meetings for five high school students identified with specific learning disabilities. Specifically, we examine how participants interacted during the IEP meetings and how learning, instruction, and…

  17. Taking "Women's Work" "Like a Man": Husbands' Experiences of Care Work

    ERIC Educational Resources Information Center

    Calasanti, Toni; King, Neal

    2007-01-01

    Purpose: We adopted a feminist, structural approach to husbands' experiences of caring for wives with Alzheimer's disease. This framework posited that men and women draw upon gender repertoires--situational ideals of behavior based upon their respective structural locations--that create gendered experiences of stress and coping strategies. Design…

  18. Errors of Inference in Structural Equation Modeling

    ERIC Educational Resources Information Center

    McCoach, D. Betsy; Black, Anne C.; O'Connell, Ann A.

    2007-01-01

    Although structural equation modeling (SEM) is one of the most comprehensive and flexible approaches to data analysis currently available, it is nonetheless prone to researcher misuse and misconceptions. This article offers a brief overview of the unique capabilities of SEM and discusses common sources of user error in drawing conclusions from…

  19. A Teaching Module about Stellar Structure and Evolution

    ERIC Educational Resources Information Center

    Colantonio, Arturo; Galano, Silvia; Leccia, Silvio; Puddu, Emanuella; Testa, Italo

    2017-01-01

    In this paper, we present a teaching module about stellar structure, functioning and evolution. Drawing from literature in astronomy education, we designed the activities around three key ideas: spectral analysis, mechanical and thermal equilibrium, energy and nuclear reactions. The module is divided into four phases, in which the key ideas for…

  20. How Learning Conditions and Program Structure Predict Burnout and Satisfaction in Teacher Education

    ERIC Educational Resources Information Center

    Zimmermann, Friederike; Rösler, Lena; Möller, Jens; Köller, Olaf

    2018-01-01

    To support prospective teachers' professional development, teacher education should be characterised by conditions that help to prevent burnout and facilitate satisfaction. This study investigates predictors of burnout and satisfaction in teacher education by drawing on universities with different teacher education programme structures and assumed…

  1. Pacer Comet 4: Automated Jet Engine Testing of a TF33-P100 Pratt & Whitney Engine

    NASA Astrophysics Data System (ADS)

    Mason, Rex Bolding

    Pacer Comet 4 found its life out of necessity to replace an obsolescent Pacer Comet 3 engine test system at Tinker AFB in Oklahoma City, OK. Pacer Comet 3 (PC3) was created and installed in the early 1980's to test jet engines from a wide range of planes. PC3 had several problems from a maintenance standpoint: contractors designed and installed the system but the contract did not include the OEM data package. Without drawings or design knowledge, fixing the smallest of problems could turn into a multi-day project. In addition to high cost, as the OEM companies of proprietary parts went out of business, it became impossible to find a replacement for a failed part. These issues set the framework for the Pacer Comet 4 (PC4) system. PC4 was created as an organic AF and Department of Defense collaboration to fix the issues with PC3. PC4 provides the customer with a complete data package including multiple drawing sets and data sheets for all parts used, as well as design files for all PCBs created in house. PC4 has a standard to use commercially available off the shelf parts (COTS). The reason for this is sustainability in maintenance. If a part is to fail, it should be able to be purchased from any manufacturer that meets the specs of the original product. No proprietary parts are used, except as directed by the engine's OEM. This thesis will focus on the design and installation of the on-frame data acquisition PC4 system for the Pratt & Whitney TF33-P100A-QEC engine that is currently in use on the E3 Sentry. This thesis will show efficiency improvements for maintenance sustainability (70% cabling reduction) as well as discuss performance improvements in both test and production environments.

  2. Transcatheter Aortic Valve-in-Valve Procedure in Patients with Bioprosthetic Structural Valve Deterioration

    PubMed Central

    Reul, Ross M.; Ramchandani, Mahesh K.; Reardon, Michael J.

    2017-01-01

    Surgical aortic valve replacement is the gold standard procedure to treat patients with severe, symptomatic aortic valve stenosis or insufficiency. Bioprosthetic valves are used for surgical aortic valve replacement with a much greater prevalence than mechanical valves. However, bioprosthetic valves may fail over time because of structural valve deterioration; this often requires intervention due to severe bioprosthetic valve stenosis or regurgitation or a combination of both. In select patients, transcatheter aortic valve replacement is an alternative to surgical aortic valve replacement. Transcatheter valve-in-valve (ViV) replacement is performed by implanting a transcatheter heart valve within a failing bioprosthetic valve. The transcatheter ViV operation is a less invasive procedure compared with reoperative surgical aortic valve replacement, but it has been associated with specific complications and requires extensive preoperative work-up and planning by the heart team. Data from experimental studies and analyses of results from clinical procedures have led to strategies to improve outcomes of these procedures. The type, size, and implant position of the transcatheter valve can be optimized for individual patients with knowledge of detailed dimensions of the surgical valve and radiographic and echocardiographic measurements of the patient's anatomy. Understanding the complexities of the ViV procedure can lead surgeons to make choices during the original surgical valve implantation that can make a future ViV operation more technically feasible years before it is required. PMID:29743998

  3. Guidelines for replacement of deficient bridges with low-water stream crossings in the rural Midwest.

    DOT National Transportation Integrated Search

    2017-02-01

    This report provides guidance to public officials and engineers considering the replacement of a deficient or obsolete bridge with a low-water stream crossing (LWSC). An LWSC is a structure that is occasionally overtopped by floodwaters and is likely...

  4. BALBES: a molecular-replacement pipeline.

    PubMed

    Long, Fei; Vagin, Alexei A; Young, Paul; Murshudov, Garib N

    2008-01-01

    The number of macromolecular structures solved and deposited in the Protein Data Bank (PDB) is higher than 40 000. Using this information in macromolecular crystallography (MX) should in principle increase the efficiency of MX structure solution. This paper describes a molecular-replacement pipeline, BALBES, that makes extensive use of this repository. It uses a reorganized database taken from the PDB with multimeric as well as domain organization. A system manager written in Python controls the workflow of the process. Testing the current version of the pipeline using entries from the PDB has shown that this approach has huge potential and that around 75% of structures can be solved automatically without user intervention.

  5. Replacement of the double bond of antitubulin chalcones with triazoles and tetrazoles: Synthesis and biological evaluation.

    PubMed

    Mesenzani, Ornella; Massarotti, Alberto; Giustiniano, Mariateresa; Pirali, Tracey; Bevilacqua, Valentina; Caldarelli, Antonio; Canonico, Pierluigi; Sorba, Giovanni; Novellino, Ettore; Genazzani, Armando A; Tron, Gian Cesare

    2011-01-15

    In the chalcone scaffold, it is thought that the double bond is an important structural linker but it is likely not essential for the interaction with tubulin. Yet, it may be a potential site of metabolic degradation and interaction with biological nucleophiles. In this letter, we have replaced this olefinic portion of chalcones with two metabolically stable and chemically inert heterocyclic rings, namely triazole or tetrazole. Yet, our biologic data suggest that, unlike in other antitubulinic structures, the olephinic ring might not be merely a structural linker. Copyright © 2010 Elsevier Ltd. All rights reserved.

  6. Development Directions for Various Types of the Light Wood-Framed Structures

    NASA Astrophysics Data System (ADS)

    Malesza, J.; Baszeń, M.; Miedziałowski, Cz

    2017-11-01

    The paper presents current trends in the development of the wood-framed structures. Authors describe the evolution of the technology of implementation, the production process of precast elements of buildings as well as selected realization on the site of these kinds of structures. The attention has been paid to the effect of implementation phases on construction and erecting technology of the wood-framed structures. The paper draws attention to the importance and enhancement of structural analysis of structures in individual phases of building realization.

  7. Comparison of good days and sick days of school-age children with cancer reflected through their drawings.

    PubMed

    Linder, Lauri A; Bratton, Heather; Nguyen, Anna; Parker, Kori; Phinney, Susanna

    2017-10-01

    Childhood cancer disrupts children's daily life experiences. Eliciting children's perspectives regarding their life experiences during cancer treatment can be challenging. The purpose of this study was to characterize elementary school-age children's "good days" and "sick days" through their drawings. This study used draw-and-tell interviews, a developmentally sensitive arts-based technique that supports children's recall and communication of information, facilitating a deeper understanding of children's personal interpretation and meaning of a given phenomenon of interest. Children were asked to draw pictures representing both a "good day" and a "sick day." Following completion of each drawing, research team members used a semi-structured interview guide to elicit children's explanations of their pictures. Content analysis techniques were used to descriptively characterize children's drawings followed by thematic analysis to identify commonalities. Participants were 27 children 6.33-12.83 years of age (mean 9.16 years; SD = 1.9) receiving treatment for cancer. "Good day" and "sick day" pictures were similar with regards to the presence of the child, the inclusion of other individuals, and the type of art medium used. Children's pictures characterized "good days" as being happy, outside in sunny weather, and engaged in activities. In contrast, "sick days" were characterized as feeling sad, lying down or reclining, and experiencing illness-related symptoms. Children's drawings illustrate their capacity to provide rich personal data related to their "good days" and "sick days." Incorporating arts-based strategies in the clinical setting may provide a child-centric strategy to understand the child's perspective and direct interventions.

  8. The possible contribution of student drawings to evaluation in a new problem-based learning medical programme: a pilot study.

    PubMed

    McLean, Michelle; Henson, Quanta; Hiles, Linda

    2003-10-01

    In January 2001, the Nelson R. Mandela School of Medicine in Durban, South Africa implemented Year 1 of a problem-based learning (PBL) curriculum. In attempting to comprehensively evaluate the first year, every aspect was investigated. Problem-based learning requires that, in addition to skills competency and knowledge acquisition, students undergo personal development on their journey towards becoming reflective professionals. Suitable methods of evaluation are therefore necessary to measure some of the new objectives. This discussion appraises the possible use of student drawings as a qualitative evaluation tool. At the end of the first academic year, students were asked to reflect on their experiences during the year by drawing (with brief explanations) how they saw themselves at the beginning (retrospective) and then at the end of the year. Drawings were interpreted in terms of reference to the new programme, and were categorised as disparaging, ambivalent or affirming. The results far exceeded expectations, providing a rich data source regarding student perceptions of their experiences in their first year. In response to the drawings, immediate remedial action was taken: for example, continuous assessment was introduced for the objective structured clinical examination (OSCE) and orientation was extended to 3 weeks to provide students with a better understanding of the PBL process. From this pilot study, there can be no doubt that student drawings can give us valuable insight into the world of the learner, providing us with information that cannot be gleaned from any other evaluation. We will continue to use drawings formatively, perhaps extending their use into portfolios.

  9. Replacement of eggs with soybean protein isolates and polysaccharides to prepare yellow cakes suitable for vegetarians.

    PubMed

    Lin, Muyang; Tay, Siang Hong; Yang, Hongshun; Yang, Bao; Li, Hongliang

    2017-08-15

    To evaluate the feasibility of substituting eggs in yellow cake by a mixture of soybean proteins, plant polysaccharides, and emulsifiers, the batter properties, including specific gravity and viscosity; cake properties, including specific volume, texture, colour, moisture, microstructures, and structural properties of starch and glutens of the replaced cake and traditional cake containing egg, were evaluated. Replacing eggs with a soy protein isolate and 1% mono-, di-glycerides yielded a similar specific volume, specific gravity, firmness and moisture content (1.92 vs. 2.08cm 3 /g, 0.95 vs. 1.03, 319.8 vs. 376.1g, and 28.03% vs. 29.01%, respectively) compared with the traditional cakes baked with eggs. Structurally, this formulation comprised dominant gliadin aggregates in the size range of 100-200nm and glutenin networking structures containing fewer but larger porosities. The results suggest that a mixture of soybean proteins and emulsifier is a promising substitute for eggs in cakes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Neoproteoglycans in tissue engineering.

    PubMed

    Weyers, Amanda; Linhardt, Robert J

    2013-05-01

    Proteoglycans, comprised of a core protein to which glycosaminoglycan chains are covalently linked, are an important structural and functional family of macromolecules found in the extracellular matrix. Advances in our understanding of biological interactions have lead to a greater appreciation for the need to design tissue engineering scaffolds that incorporate mimetics of key extracellular matrix components. A variety of synthetic and semisynthetic molecules and polymers have been examined by tissue engineers that serve as structural, chemical and biological replacements for proteoglycans. These proteoglycan mimetics have been referred to as neoproteoglycans and serve as functional and therapeutic replacements for natural proteoglycans that are often unavailable for tissue engineering studies. Although neoproteoglycans have important limitations, such as limited signaling ability and biocompatibility, they have shown promise in replacing the natural activity of proteoglycans through cell and protein binding interactions. This review focuses on the recent in vivo and in vitro tissue engineering applications of three basic types of neoproteoglycan structures, protein-glycosaminoglycan conjugates, nano-glycosaminoglycan composites and polymer-glycosaminoglycan complexes. © 2013 The Authors Journal compilation © 2013 FEBS.

  11. Neoproteoglycans in tissue engineering

    PubMed Central

    Weyers, Amanda; Linhardt, Robert J.

    2014-01-01

    Proteoglycans, comprised of a core protein to which glycosaminoglycan chains are covalently linked, are an important structural and functional family of macromolecules found in the extracellular matrix. Advances in our understanding of biological interactions have lead to a greater appreciation for the need to design tissue engineering scaffolds that incorporate mimetics of key extracellular matrix components. A variety of synthetic and semisynthetic molecules and polymers have been examined by tissue engineers that serve as structural, chemical and biological replacements for proteoglycans. These proteoglycan mimetics have been referred to as neoproteoglycans and serve as functional and therapeutic replacements for natural proteoglycans that are often unavailable for tissue engineering studies. Although neoproteoglycans have important limitations, such as limited signaling ability and biocompatibility, they have shown promise in replacing the natural activity of proteoglycans through cell and protein binding interactions. This review focuses on the recent in vivo and in vitro tissue engineering applications of three basic types of neoproteoglycan structures, protein–glycosaminoglycan conjugates, nano-glycosaminoglycan composites and polymer–glycosaminoglycan complexes. PMID:23399318

  12. Challenges and Solutions in Fabrication of Silica-Based Photonic Crystal Fibers: An Experimental Study

    NASA Astrophysics Data System (ADS)

    Amouzad Mahdiraji, G.; Chow, Desmond M.; Sandoghchi, S. R.; Amirkhan, F.; Dermosesian, E.; Shien Yeo, Kwok; Kakaei, Z.; Ghomeishi, M.; Poh, Soo Yong; Gang, Shee Yu; Mahamd Adikan, F. R.

    2014-01-01

    The fabrication process of photonic crystal fibers based on a stack-and-draw method is presented in full detail in this article. In addition, improved techniques of photonic crystal fiber preform preparation and fabrication are highlighted. A new method of connecting a handle to a preform using only a fiber drawing tower is demonstrated, which eliminates the need for a high-temperature glass working lathe. Also, a new technique of modifying the photonic crystal fiber structural pattern by sealing air holes of the photonic crystal fiber cane is presented. Using the proposed methods, several types of photonic crystal fibers are fabricated, which suggests potential for rapid photonic crystal fibers fabrication in laboratories equipped with and limited to only a fiber drawing tower.

  13. A Study Of Undergraduate Students' Alternative Conceptions Of Earth's Interior Using Drawing Tasks

    NASA Astrophysics Data System (ADS)

    McAllister, Meredith L.

    2014-12-01

    Learning fundamental geoscience topics such as plate tectonics, earthquakes, and volcanoes requires students to develop a deep understanding of the conceptual models geologists use when describing the structure and dynamics of Earth's interior. Despite the importance of these mental models underlying much of the undergraduate geoscience curriculum, surprisingly little research related to this complex idea exists in the discipline-based science education research literature. To better understand non-science-majoring undergraduates' conceptual models of Earth's interior, student-generated drawings and interviews were used to probe student understanding of the Earth. Ninety-two semi-structured interviews were conducted with non-science-major college students at the beginning of an entry-level geology course at a large Midwestern university. Students were asked to draw a picture of Earth's interior and provide think-aloud explanations of their drawings. The results reveal that students hold a wide range of alternative conceptions about Earth, with only a small fraction having scientifically accurate ideas. Students' understandings ranged from conceptualizing Earth's interior as consisting of horizontal layers of rock and dirt, to more sophisticated views with Earth's interior being composed of concentric layers with unique physical and chemical characteristics. Processes occurring within Earth, such as "convection," were rarely mentioned or explained. These results provide a first-steps basis from which to further explore college students' thinking and contribute to the growing body of knowledge on earth science teaching and geoscience education research.

  14. Structural evaluation of a DTHR bundle divertor particle collector

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Prevenslik, T.V.

    1980-09-01

    The purpose of this report is to present a structural evaluation of the current bundle divertor particle collector BDPC design under a peak heat flux in relation to criteria that protect against coolant leakage into the plasma over replacement schedules planned during DTHR operation. In addition, an assessment of the BDPC structural integrity at higher heat fluxes is presented. Further, recommendations for modifications in the current BDPC design that would improve design reliability to be considered in future design studies are described. Finally, experimental test programs directed to establishing materials data necessary in providing greater confidence in subsequent structural evaluationsmore » of BDPC designs in relation to coolant leakage over planned replacement schedules are identified.« less

  15. Human β-glucuronidase: structure, function, and application in enzyme replacement therapy.

    PubMed

    Naz, Huma; Islam, Asimul; Waheed, Abdul; Sly, William S; Ahmad, Faizan; Hassan, Imtaiyaz

    2013-10-01

    Lysosomal storage diseases occur due to incomplete metabolic degradation of macromolecules by various hydrolytic enzymes in the lysosome. Despite structural differences, most of the lysosomal enzymes share many common features including a lysosomal targeting motif and phosphotransferase recognition sites. β-Glucuronidase (GUSB) is an important lysosomal enzyme involved in the degradation of glucuronate-containing glycosaminoglycan. The deficiency of GUSB causes mucopolysaccharidosis type VII (MPSVII), leading to lysosomal storage in the brain. GUSB is a well-studied protein for its expression, sequence, structure, and function. The purpose of this review is to summarize our current understanding of sequence, structure, function, and evolution of GUSB and its lysosomal enzyme targeting. Enzyme replacement therapy reported for this protein is also discussed.

  16. Guidelines for replacement of deficient bridges with low-water stream crossings in the rural Midwest : technical summary.

    DOT National Transportation Integrated Search

    2017-02-01

    This report provides guidance to public officials and engineers considering the replacement of a deficient or obsolete bridge with a low-water stream crossing (LWSC). An LWSC is a structure that is occasionally overtopped by floodwaters and is likely...

  17. A search for new glucophores by isosteric replacement of carboxylic function.

    PubMed

    Polański, J; Jarzembek, K; Łysiak, V

    2000-11-01

    We used arylsulfonylalkanoic acids as parent structures for designing new potential sweeteners. The Kohonen maps of the molecular electrostatic potential of the possible bioisosteric replacements of carboxylic function have been simulated and used for the selection of the potential synthetic targets which are now under synthesis.

  18. Brief history of intermolecular and intersurface forces in complex fluid systems.

    PubMed

    Israelachvili, Jacob; Ruths, Marina

    2013-08-06

    We review the developments of ideas, concepts, and theories of intermolecular and intersurface forces and how these were influenced (or ignored) by observations of nature and, later, systematic experimentation. The emphasis of this review is on the way things gradually changed: experimentation replaced rhetoric, measurement and quantification replaced hand waving, energy replaced force in calculations, discrete atoms replaced the (continuum) aether, thermodynamics replaced mechanistic models, randomness and probability replaced certainty, and delicate experiments on the subnanoscale revealed fascinating self-assembling structures and complex behavior of even the simplest systems. We conclude by discussing today's unresolved challenges: how complex "dynamic" multicomponent--especially living biological--systems that receive a continuous supply of energy can be far from equilibrium and not even in any steady state. Such systems, never static but evolving in both space and time, are still far from being understood both experimentally and theoretically.

  19. Focus-based filtering + clustering technique for power-law networks with small world phenomenon

    NASA Astrophysics Data System (ADS)

    Boutin, François; Thièvre, Jérôme; Hascoët, Mountaz

    2006-01-01

    Realistic interaction networks usually present two main properties: a power-law degree distribution and a small world behavior. Few nodes are linked to many nodes and adjacent nodes are likely to share common neighbors. Moreover, graph structure usually presents a dense core that is difficult to explore with classical filtering and clustering techniques. In this paper, we propose a new filtering technique accounting for a user-focus. This technique extracts a tree-like graph with also power-law degree distribution and small world behavior. Resulting structure is easily drawn with classical force-directed drawing algorithms. It is also quickly clustered and displayed into a multi-level silhouette tree (MuSi-Tree) from any user-focus. We built a new graph filtering + clustering + drawing API and report a case study.

  20. Response of two identical seven-story structures to the San Fernando earthquake of February 9, 1971

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Freeman, S.A.; Honda, K.K.

    1973-10-01

    The results of the structural dynamic investigation of two sevenstory reinforced concrete frame structures are presented here. The structures are both Holiday Inn rnotor hotels that are essentially identical: one is locrted about 13 miles and the other about 26 miles from the epicenter of the February 9, 1971, San Fernando earthquake. Appreciable nonstructural damage as well as some structural damage was observed. Strong-motion seismic records were obtained for the roof, intermediate story, and ground floor of each structure. The analyses are based on data from the structural drawings, architectural drawings, photographs, engineering reports, and seisrnogram records obtained before, during,more » and after the San Fernando earthquake. Both structures experienced motion well beyond the limits of the building code design criteria. A change in fundamental period was observed for each structure after several seconds of response to the earthquake, which indicated nonlinear response. The analyses indicated that the elastic capacity of some structural members was exceeded. Idealized linear models were constructed to approximate response at various time segments. A method for approximating the nonlinear response of each structure is presented. The effects of nonstructural elements, yielding beams, and column capacities are illustrated. Comparisons of the two buildings are made for ductility factors, dynarnic response characteristics, and damage. Conclusions are drawn concerning the effects of the earthquake on the structures and the future capacities of the structures. (auth)« less

  1. Unusual Formation of Precursors for Crystallization of Ultra-High Performance Polypropylene and Poly(ethylene terephthalate) Fibers by Utilization of Ecologically Friendly Horizontal Isothermal Bath

    NASA Astrophysics Data System (ADS)

    Avci, Huseyin

    The concept of production of new families of high performance polymers and engineering fibers has been reported many times in the technical literature. Such fibers have various end uses in industrial applications and exhibit the enhanced potential in the challenging areas such as ballistic, automotive, aerospace, bullet-proof vests, energy, and electronics. Since the first commercial synthesis of high polymers by Carothers and Hill, filament manufacturers have looked for ways to increase strength and fibers dimensional stability, thermal degradation resistance, etc., even at extreme conditions. Therefore, studies on the fine structure development and its relation with production conditions during the wet, dry, and melt spinning processes have received much attention by researchers to describe in detail the fundamental aspects of the fiber formation. The production of ultra-high performance fibers at relatively high throughputs by a simple method using fiber-forming polymers via developing an ecologically friendly isothermal bath (ECOB) is the first aim of this study. In this case, polypropylene (PP) was chosen as a semicrystalline thermoplastic polymer which is extensively used in industry and our daily lives. A unique, highly oriented precursor (fa = 0.60), and yet noncrystallized, undrawn fibers were obtained with superior mechanical properties. Fibrillated break, high crystalline and amorphous orientation factors of 0.95 and 0.87, respectively, demonstrate an unusual structural development after only 1.34 draw ratio for the treated fibers. The second melting peak increased 9 °C for the treated fibers, which implies a higher level of molecular ordering and thermodynamically more stable phase. After hot drawing and 1.49 draw ratio, the fibers tenacity was close to 12 g/d, the initial modulus was higher than 150 g/d, and the ultimate elongation was at a break of about 20 %. In the next phase of the research, the effects of horizontal isothermal bath (hIB)11 on the structural development and the production of ultra-high performance as-spun and drawn polypropylene (PP) filaments were investigated. Two different commercial fiber forming PP polymers were used with the melt flow rate of 4.1 and 36 g/10 min. The results demonstrate surprisingly different precursor morphologies for each type of polymer at their optimum process condition. Interestingly, the all treated fibers demonstrated the similar fiber performance having tenacity of about 7 g/d and modulus of 75 g/d for as-spun fibers. After fiber drawing with DR of 1.49, tenacity greater than 12 g/d and modulus higher than 190 g/d were observed. The mean value for the modulus after the drawing process for the high melt flow rate is about 196 g/d. The theoretical modulus of PP is 35--42 GPa17, 275-330 g/d, which demonstrates the hIB fiber's modulus performance is approaching its theoretical maximum values. A key aspect of the third section of this study was to obtain ultra-high performance poly(ethylene terephthalate) fibers (PET) by utilizing a low molecular weight polymer via hIB method. The resulted fibers showed the efficient polymer chain orientation and the highly crystalline and ordered structures. The highest tenacity of more than 8 and 10 g/d were observed for the as-spun and drawn fibers, respectively, after only 1.28 draw ratios. The significant effect of the temperature of hIB spinning system on the fibrillar structure and the precursor's formation of the as-spun fibers was demonstrated. The melting temperature increased 8.51 °C from 254.05 to 262.56 °C when untreated and treated fibers are compared. The most important contribution of this study is that all these various types of polymer precursors for crystallization with different molecular weights after the baths treatments were highly oriented, yet non-crystallized or just showed the initial stages of crystallization. By a subsequent hot drawing process with the low draw ratio (DR< 1.5), the treated fibers showed a well-developed chain orientation and highly crystallized structures with superior mechanical performance.

  2. [Bone defect replacement under conditions of transosseous osteosynthesis and titanium nickelide implant application].

    PubMed

    Ir'ianov, Iu M; Ir'ianova, T Iu

    2012-01-01

    In the experiment conducted on 30 Wistar rats, the peculiarities of tibial bone defect replacement under conditions of transosseous osteosynthesis and implantation of titanium nickelide mesh structures were studied using the methods of scanning electron microscopy and x-ray electron probe microanalysis. It was demonstrated that implant osseointegration occured 7 days after surgery, and after 30 days the defect was replaced with bone tissue by the type of primary bone wound healing, thus the organotypical remodeling of regenerated bone took place.

  3. A Functional Simulator of Spacecraft Resources

    NASA Technical Reports Server (NTRS)

    Liceaga, Carlos A.; Troutman, Patrick A.

    1997-01-01

    The SPAcecraft SIMulator (SPASIM) simulates the functions and resources of a spacecraft to quickly perform Phase A trade-off analyses and uncover any operational bottlenecks during any part of the mission. Failure modes and operational contingencies can be evaluated allowing optimization for a range of mission scenarios. The payloads and subsystems are simulated, using a hierarchy of graphical models, in terms of how their functions affect resources such as propellant, power, and data. Any of the inputs and outputs of the payloads and subsystems can be plotted during the simulation. Most trade-off analyses, including those that compare current versus advanced technology, can be performed by changing values in the parameter menus. However, when a component is replaced by one with a different functional architecture, its graphical model can also be modified or replaced by drawing from a component library. SPASIM has been validated using several spacecraft designs which were at least at the Critical Design Review level. The user and programmer guide, including figures, is available on line as a hyper text document. This is an easy-to-use and expand tool which is based on MATLAB and SIMULINK. It runs on SGI workstations and PCs under Windows 95 or NT.

  4. Using Evernote as an electronic lab notebook in a translational science laboratory.

    PubMed

    Walsh, Emily; Cho, Ilseung

    2013-06-01

    Electronic laboratory notebooks (ELNs) offer significant advantages over traditional paper laboratory notebooks (PLNs), yet most research labs today continue to use paper documentation. While biopharmaceutical companies represent the largest portion of ELN users, government and academic labs trail far behind in their usage. Our lab, a translational science laboratory at New York University School of Medicine (NYUSoM), wanted to determine if an ELN could effectively replace PLNs in an academic research setting. Over 6 months, we used the program Evernote to record all routine experimental information. We also surveyed students working in research laboratories at NYUSoM on the relative advantages and limitations of ELNs and PLNs and discovered that electronic and paper notebook users alike reported the inability to freehand into a notebook as a limitation when using electronic methods. Using Evernote, we found that the numerous advantages of ELNs greatly outweighed the inability to freehand directly into a notebook. We also used imported snapshots and drawing program add-ons to obviate the need for freehanding. Thus, we found that using Evernote as an ELN not only effectively replaces PLNs in an academic research setting but also provides users with a wealth of other advantages over traditional paper notebooks.

  5. Differentiation and displacement: Unpicking the relationship between accounts of illness and social structure

    PubMed Central

    Gibson, Barry J; Paul, Ninu R

    2014-01-01

    This article seeks to unpack the relationship between social structure and accounts of illness. Taking dentine hypersensitivity as an example, this article explores the perspective that accounts of illness are sense-making processes that draw on a readily available pool of meaning. This pool of meaning is composed of a series of distinctions that make available a range of different lines of communication and action about such conditions. Such lines of communication are condensed and preserved over time and are often formed around a concept and its counter concept. The study of such processes is referred to as semantic analysis and involves drawing on the tools and techniques of conceptual history. This article goes on to explore how the semantics of dentine hypersensitivity developed. It illustrates how processes of social differentiation led to the concept being separated from the more dominant concept of dentine sensitivity and how it was medicalised, scientised and economised. In short, this study seeks to present the story of how society has developed a specific language for communicating about sensitivity and hypersensitivity in teeth. In doing so, it proposes that accounts of dentine hypersensitivity draw on lines of communication that society has preserved over time. PMID:25197262

  6. Egade, Mexico.

    ERIC Educational Resources Information Center

    Kubany, Elizabeth

    2001-01-01

    Presents a business school design in Mexico, whose spiral building sits atop a parking structure creating a compact, symbolic form for an arid urban landscape. Includes seven photographs, a floor plan, and sectional drawing. (GR)

  7. Properties of Non-Structural Concrete Made with Mixed Recycled Aggregates and Low Cement Content

    PubMed Central

    López-Uceda, Antonio; Ayuso, Jesús; López, Martin; Jimenez, José Ramón; Agrela, Francisco; Sierra, María José

    2016-01-01

    In spite of not being legally accepted in most countries, mixed recycled aggregates (MRA) could be a suitable raw material for concrete manufacturing. The aims of this research were as follows: (i) to analyze the effect of the replacement ratio of natural coarse aggregates with MRA, the amount of ceramic particles in MRA, and the amount of cement, on the mechanical and physical properties of a non-structural concrete made with a low cement content; and (ii) to verify if it is possible to achieve a low-strength concrete that replaces a greater amount of natural aggregate with MRA and that has a low cement content. Two series of concrete mixes were manufactured using 180 and 200 kg/m3 of CEM II/A-V 42.5 R type Portland cement. Each series included seven concrete mixes: one with natural aggregates; two MRA with different ceramic particle contents; and one for each coarse aggregate replacement ratio (20%, 40%, and 100%). To study their properties, compressive and splitting tensile strength, modulus of elasticity, density, porosity, water penetration, and sorptivity, tests were performed. The results confirmed that the main factors affecting the properties analyzed in this research are the amount of cement and the replacement ratio; the two MRAs used in this work presented a similar influence on the properties. A non-structural, low-strength concrete (15 MPa) with an MRA replacement ratio of up to 100% for 200 kg/m3 of cement was obtained. This type of concrete could be applied in the construction of ditches, sidewalks, and other similar civil works. PMID:28787874

  8. Properties of Non-Structural Concrete Made with Mixed Recycled Aggregates and Low Cement Content.

    PubMed

    López-Uceda, Antonio; Ayuso, Jesús; López, Martin; Jimenez, José Ramón; Agrela, Francisco; Sierra, María José

    2016-01-26

    In spite of not being legally accepted in most countries, mixed recycled aggregates (MRA) could be a suitable raw material for concrete manufacturing. The aims of this research were as follows: (i) to analyze the effect of the replacement ratio of natural coarse aggregates with MRA, the amount of ceramic particles in MRA, and the amount of cement, on the mechanical and physical properties of a non-structural concrete made with a low cement content; and (ii) to verify if it is possible to achieve a low-strength concrete that replaces a greater amount of natural aggregate with MRA and that has a low cement content. Two series of concrete mixes were manufactured using 180 and 200 kg/m³ of CEM II/A-V 42.5 R type Portland cement. Each series included seven concrete mixes: one with natural aggregates; two MRA with different ceramic particle contents; and one for each coarse aggregate replacement ratio (20%, 40%, and 100%). To study their properties, compressive and splitting tensile strength, modulus of elasticity, density, porosity, water penetration, and sorptivity, tests were performed. The results confirmed that the main factors affecting the properties analyzed in this research are the amount of cement and the replacement ratio; the two MRAs used in this work presented a similar influence on the properties. A non-structural, low-strength concrete (15 MPa) with an MRA replacement ratio of up to 100% for 200 kg/m³ of cement was obtained. This type of concrete could be applied in the construction of ditches, sidewalks, and other similar civil works.

  9. Mechanistic insights aid the search for CFC substitutes: risk assessment of HCFC-123 as an example.

    PubMed

    Jarabek, A M; Fisher, J W; Rubenstein, R; Lipscomb, J C; Williams, R J; Vinegar, A; McDougal, J N

    1994-06-01

    An international consensus on the need to reduce the use of chlorofluorocarbons (CFCs) and other ozone-depleting gases such as the halons led to the adoptions of the 1987 Montreal Protocol and Title VI of the 1990 Clean Air Act Amendments, "Protecting Stratospheric Ozone." These agreements included major provisions for reducing and eventually phasing out production and use of CFCs and halons as well as advancing the development of replacement chemicals. Because of the ubiquitous use and benefits of CFCs and halons, an expeditious search for safe replacements to meet the legislative deadlines is of critical importance. Toxicity testing and health risk assessment programs were established to evaluate the health and environmental impact of these replacement chemicals. Development and implementation of these programs as well as the structural-activity relationships significant for the development of the replacement chemicals are described below. A dose-response evaluation for the health risk assessment of the replacement chemical HCFC-123 (2,2-dichloro-1,1,1-trifluoroethane) is also presented to show an innovative use of physiologically based pharmacokinetic (PBPK) modeling. This is based on a parallelogram approach using data on the anesthetic gas halothane, a structural analog to HCFC-123. Halothane and HCFC-123 both form the same metabolite, trifluoroacetic acid (TFA), indicative of the same metabolic oxidative pathway attributed to hepatotoxicity. The parallelogram approach demonstrates the application of template model structures and shows how PBPK modeling, together with judicious experimental design, can be used to improve the accuracy of health risk assessment and to decrease the need for extensive laboratory animal testing.

  10. Proximal, Distal, and the Politics of Causation: What’s Level Got to Do With It?

    PubMed Central

    Krieger, Nancy

    2008-01-01

    Causal thinking in public health, and especially in the growing literature on social determinants of health, routinely employs the terminology of proximal (or downstream) and distal (or upstream). I argue that the use of these terms is problematic and adversely affects public health research, practice, and causal accountability. At issue are distortions created by conflating measures of space, time, level, and causal strength. To make this case, I draw on an ecosocial perspective to show how public health got caught in the middle of the problematic proximal–distal divide—surprisingly embraced by both biomedical and social determinist frameworks—and propose replacing the terms proximal and distal with explicit language about levels, pathways, and power. PMID:18172144

  11. A SiQuENC for solving physics problems

    NASA Astrophysics Data System (ADS)

    Liao, David

    2018-04-01

    Students often struggle in AP Physics 1 because they have not been previously trained to develop qualitative arguments. Extensive literature on multiple representations and qualitative reasoning provides strategies to address this challenge. Table I presents three examples, including SiQuENC, which I adapted from a strategy promoted by Etkina et al. To remind students that they can use qualitative reasoning (e.g., arguing from proportionalities), rather than relying only on algebra, I replaced "Solve" with "Analyze." I added a "Communicate" step to guide planning of written responses to AP Physics 1 and 2 questions. To perform this step, draw a circled number around each key point identified in figures, equations, and sentence fragments. Then, convert numbered points into sentences.

  12. Evaluating the risk of water distribution system failure: A shared frailty model

    NASA Astrophysics Data System (ADS)

    Clark, Robert M.; Thurnau, Robert C.

    2011-12-01

    Condition assessment (CA) Modeling is drawing increasing interest as a technique that can assist in managing drinking water infrastructure. This paper develops a model based on the application of a Cox proportional hazard (PH)/shared frailty model and applies it to evaluating the risk of failure in drinking water networks using data from the Laramie Water Utility (located in Laramie, Wyoming, USA). Using the risk model a cost/ benefit analysis incorporating the inspection value method (IVM), is used to assist in making improved repair, replacement and rehabilitation decisions for selected drinking water distribution system pipes. A separate model is developed to predict failures in prestressed concrete cylinder pipe (PCCP). Various currently available inspection technologies are presented and discussed.

  13. Diffusion of anthracene derivatives on Cu(111) studied by STM and DFT

    NASA Astrophysics Data System (ADS)

    Wyrick, Jonathan; Bartels, Ludwig; Einstein, Theodore

    2014-03-01

    Substituted anthracenes have drawn attention due to their ability to diffuse uniaxially on a Cu(111) surface. We compare anthracene to three of its derivatives whose 9,10 hydrogens are replaced by elements of the chalcogen group that act as linkers binding the molecules to a Cu(111) substrate. DFT calculations shed light on STM imaging and diffusion studies on the three substituted species. We present an analysis of the DFT results in which energetic contributions to the diffusion barriers are partitioned among the Kohn-Sham orbitals, allowing us to make assignments as to how each orbital affects diffusion for each species and draw comparisons between them. Present address: Center for Nanoscale Science and Technology, NIST, Gaithersburg, MD.

  14. Proximal, distal, and the politics of causation: what's level got to do with it?

    PubMed

    Krieger, Nancy

    2008-02-01

    Causal thinking in public health, and especially in the growing literature on social determinants of health, routinely employs the terminology of proximal (or downstream) and distal (or upstream). I argue that the use of these terms is problematic and adversely affects public health research, practice, and causal accountability. At issue are distortions created by conflating measures of space, time, level, and causal strength. To make this case, I draw on an ecosocial perspective to show how public health got caught in the middle of the problematic proximal-distal divide--surprisingly embraced by both biomedical and social determinist frameworks--and propose replacing the terms proximal and distal with explicit language about levels, pathways, and power.

  15. Critical Bifocality and Circuits of Privilege: Expanding Critical Ethnographic Theory and Design

    ERIC Educational Resources Information Center

    Weis, Lois; Fine, Michelle

    2012-01-01

    In this article, Lois Weis and Michelle Fine introduce critical bifocality as a way to render visible the relations between groups to structures of power, to social policies, to history, and to large sociopolitical formations. In this collaboration, the authors draw upon ethnographic examples highlighting the macro-level structural dynamics…

  16. 36. ARCHITECTURAL AND STRUCTURAL DETAILS OF ELEVATOR HOUSING, NaK HEATER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    36. ARCHITECTURAL AND STRUCTURAL DETAILS OF ELEVATOR HOUSING, NaK HEATER STACK ROOF FLASHING, HOOD ELEVATION DETAIL. INCLUDES PARTIAL 'BILL OF MATERIAL.' INEEL DRAWING NUMBER 200-0633-00-287-106361. FLUOR NUMBER 5775-CPP-633-A-11. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  17. Pronunciation Training Facilitates the Learning and Retention of L2 Grammatical Structures

    ERIC Educational Resources Information Center

    Martin, Ines A.; Jackson, Carrie N.

    2016-01-01

    The present study investigated the impact of pronunciation training on the learning and retention of second language (L2) grammatical structures. By drawing on the phonological saliency of stress placement in German separable- and inseparable-prefix verbs, the study explored whether enhancing explicit instruction through pronunciation training can…

  18. Effective Practices and Structures for Middle Grades Education. Policy Issues.

    ERIC Educational Resources Information Center

    Mac Iver, Douglas

    This document draws upon theory and research about early adolescence and about the effects of middle grades structures and practices on student outcomes. The purpose is to identify specific problem areas and promising innovations that should be considered by policymakers as they establish guidelines for the restructuring of education in the middle…

  19. 15 minute consultation: a structured approach to the management of facial paralysis in a child.

    PubMed

    Malik, Vikas; Joshi, Vineeta; Green, Kevin M J; Bruce, Iain A

    2012-06-01

    To present a structured approach for an outpatient consultation of a child with facial paralysis. Review of literature and description of approach followed in our unit. A focused history and examination is key to establish the cause and draw a management plan for paediatric facial paralysis.

  20. Applied Gamification: Reframing Evaluation in Post-Secondary Classrooms

    ERIC Educational Resources Information Center

    Kulpa, Anastasia

    2017-01-01

    This piece reports on an early attempt at gamification (reframing post-secondary classrooms drawing on the structure of games). The attempt began in the 2011-2012 academic year and is structured to allow students substantial autonomy in determining which assignments, and how many of them, to complete over the course of the semester. Initial…

  1. On the Concept "Microscope": Biology Student Teachers' Cognitive Structure

    ERIC Educational Resources Information Center

    Kurt, Hakan; Ekici, Gulay; Aktas, Murat; Aksu, Ozlem

    2013-01-01

    The purpose of the current study is to determine biology student teachers' cognitive structures on the concept of microscope. Qualitative research methodology has been applied in the study. The data were collected from biology student teachers. Free word association test and drawing-writing test were used to collect data. The data collected were…

  2. The Integration of Continuous and Discrete Latent Variable Models: Potential Problems and Promising Opportunities

    ERIC Educational Resources Information Center

    Bauer, Daniel J.; Curran, Patrick J.

    2004-01-01

    Structural equation mixture modeling (SEMM) integrates continuous and discrete latent variable models. Drawing on prior research on the relationships between continuous and discrete latent variable models, the authors identify 3 conditions that may lead to the estimation of spurious latent classes in SEMM: misspecification of the structural model,…

  3. Families Are Changing--And Staying the Same

    ERIC Educational Resources Information Center

    Cohen, Philip N.

    2017-01-01

    Drawing on data from the U.S. Census Bureau, the author highlights the increasing diversity of family structures, roles, and trajectories. Teachers, he writes, need to be able to talk about "the family" without imposing a narrow definition of family structure. At the same time, teachers need to celebrate the common values that underlie…

  4. Neurological Organization and Reading.

    ERIC Educational Resources Information Center

    Consilia, Sister Mary

    The structure and function of the nervous system as it puts us into contact with our environment is described. Section 1 presents a detailed discussion of the structure of the brain, drawing an analogy to a computer, and discusses the sensory input function. The transport system is then explained in a description of the transmission of sensory…

  5. Institutional Frameworks and Structural Factors Relating to Educational Access across Europe

    ERIC Educational Resources Information Center

    Biggart, Andy; Järvinen, Tero; Parreira do Amaral, Marcelo

    2015-01-01

    In this article institutional and structural factors relating to access to education are assessed. First, the macro frameworks of institutional regulation that exert influence on the educational trajectories of young Europeans are demonstrated. Based on different aspects of these frameworks and drawing from extant research, the article presents a…

  6. Faculty Agency in Striving University Contexts: Mundane yet Powerful Acts of Agency

    ERIC Educational Resources Information Center

    Gonzales, Leslie D.

    2015-01-01

    Drawing from Archer's critical realist theory of agency, this paper has two specific aims. First, the cultural and structural features of one "striving" institution are outlined. Then, I illustrate how faculty members asserted agency inside their striving university in ways intended to disrupt the structures and cultures that striving…

  7. GirlPOWER! Strengthening Mentoring Relationships through a Structured, Gender-Specific Program

    ERIC Educational Resources Information Center

    Pryce, Julia M.; Silverthorn, Naida; Sanchez, Bernadette; DuBois, David L.

    2010-01-01

    The authors examine GirlPOWER! an innovative program that uses structure and group-based activities to enhance one-to-one mentoring relationships for young adolescent girls from the perspective of the focus, purpose, and authorship dimensions of mentoring relationships that Karcher and Nakkula described. The discussion draws on several sources of…

  8. The Development of Solution Focused Multi-Agency Meetings in a Psychological Service

    ERIC Educational Resources Information Center

    Alexander, Shiona; Sked, Heather

    2010-01-01

    This article outlines the successful development of multi-agency meetings as part of a staged approach aimed at supporting families and children within the Scottish Highland Council Area. Drawing on the research evidence for the factors which help to make meetings effective, a distinctive meeting structure was developed. This structure is…

  9. Body Aesthetic Preference in Preschoolers and Attraction to Canons Violation: An Exploratory Study.

    PubMed

    Di Dio, Cinzia; Berchio, Cristina; Massaro, Davide; Lombardi, Elisabetta; Gilli, Gabriella; Marchetti, Antonella

    2017-01-01

    Sensitivity to canons of beauty as represented in the human body-and as typically defined in the Western Culture-has been poorly studied in children. Current literature shows that infants as young as about three months are sensitive to the human body structure and its parts. Using a sample of 54 three- to five-year-old children, the present study investigated preference for drawings representing the "canonical" body structure, contrasting these with drawings showing the same bodies, but where the relation between trunk and legs was modified. It was hypothesized that preference for the canonical body structures would emerge as early as three years, increasing with age. Results only partially supported the hypothesis: while three-year-olds showed a significant preference for the canonical body structures as predicted, a significant preference reversal was found for the four-year-olds, with a tendency to return to preferring the canonical body at five years. The results are discussed in light of research findings associated with developmental theories hallmarking visual art perception in children.

  10. Influence of fertilizer draw solution properties on the process performance and microbial community structure in a side-stream anaerobic fertilizer-drawn forward osmosis - ultrafiltration bioreactor.

    PubMed

    Kim, Youngjin; Li, Sheng; Chekli, Laura; Phuntsho, Sherub; Ghaffour, Noreddine; Leiknes, TorOve; Shon, Ho Kyong

    2017-09-01

    In this study, a side-stream anaerobic fertilizer-drawn forward osmosis (FDFO) and ultrafiltration (UF) membrane bioreactor (MBR) hybrid system was proposed and operated for 55days. The FDFO performance was first investigated in terms of flux decline with various fertilizers draw solution. Flux decline was very severe with all fertilizers due to the absence of aeration and the sticky property of sludge. Flux recovery by physical cleaning varied significantly amongst tested fertilizers which seriously affected biofouling in FDFO via reverse salt flux (RSF). Besides, RSF had a significant impact on nutrient accumulation in the bioreactor. These results indicated that nutrient accumulation negatively influenced the anaerobic activity. To elucidate these phenomena, bacterial and archaeal community structures were analyzed by pyrosequencing. Results showed that bacterial community structure was affected by fertilizer properties with less impact on archaeal community structure, which resulted in a reduction in biogas production and an increase in nitrogen content. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Kinetics of methane hydrate replacement with carbon dioxide and nitrogen gas mixture using in situ NMR spectroscopy.

    PubMed

    Cha, Minjun; Shin, Kyuchul; Lee, Huen; Moudrakovski, Igor L; Ripmeester, John A; Seo, Yutaek

    2015-02-03

    In this study, the kinetics of methane replacement with carbon dioxide and nitrogen gas in methane gas hydrate prepared in porous silica gel matrices has been studied by in situ (1)H and (13)C NMR spectroscopy. The replacement process was monitored by in situ (1)H NMR spectra, where about 42 mol % of the methane in the hydrate cages was replaced in 65 h. Large amounts of free water were not observed during the replacement process, indicating a spontaneous replacement reaction upon exposing methane hydrate to carbon dioxide and nitrogen gas mixture. From in situ (13)C NMR spectra, we confirmed that the replacement ratio was slightly higher in small cages, but due to the composition of structure I hydrate, the amount of methane evolved from the large cages was larger than that of the small cages. Compositional analysis of vapor and hydrate phases was also carried out after the replacement reaction ceased. Notably, the composition changes in hydrate phases after the replacement reaction would be affected by the difference in the chemical potential between the vapor phase and hydrate surface rather than a pore size effect. These results suggest that the replacement technique provides methane recovery as well as stabilization of the resulting carbon dioxide hydrate phase without melting.

  12. Design of complex bone internal structure using topology optimization with perimeter control.

    PubMed

    Park, Jaejong; Sutradhar, Alok; Shah, Jami J; Paulino, Glaucio H

    2018-03-01

    Large facial bone loss usually requires patient-specific bone implants to restore the structural integrity and functionality that also affects the appearance of each patient. Titanium alloys (e.g., Ti-6Al-4V) are typically used in the interfacial porous coatings between the implant and the surrounding bone to promote stability. There exists a property mismatch between the two that in general leads to complications such as stress-shielding. This biomechanical discrepancy is a hurdle in the design of bone replacements. To alleviate the mismatch, the internal structure of the bone replacements should match that of the bone. Topology optimization has proven to be a good technique for designing bone replacements. However, the complex internal structure of the bone is difficult to mimic using conventional topology optimization methods without additional restrictions. In this work, the complex bone internal structure is recovered using a perimeter control based topology optimization approach. By restricting the solution space by means of the perimeter, the intricate design complexity of bones can be achieved. Three different bone regions with well-known physiological loadings are selected to illustrate the method. Additionally, we found that the target perimeter value and the pattern of the initial distribution play a vital role in obtaining the natural curvatures in the bone internal structures as well as avoiding excessive island patterns. Copyright © 2018 Elsevier Ltd. All rights reserved.

  13. Mod-5A wind turbine generator program design report. Volume 4: Drawings and specifications, book 1

    NASA Astrophysics Data System (ADS)

    1984-08-01

    The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Volume 4 contains the drawings and specifications that were developed in preparation for building the MOD-5A wind turbine generator. This is the first of five books of volume four. It contains structural design criteria, generator step-up transformer specs, specs for design, fabrication and testing of the system, specs for the ground control enclosure, systems specs, slip ring specs, and control system specs.

  14. Mod-5A Wind Turbine Generator Program Design Report. Volume 4: Drawings and Specifications, Book 1

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Volume 4 contains the drawings and specifications that were developed in preparation for building the MOD-5A wind turbine generator. This is the first of five books of volume four. It contains structural design criteria, generator step-up transformer specs, specs for design, fabrication and testing of the system, specs for the ground control enclosure, systems specs, slip ring specs, and control system specs.

  15. NVR-BIP: Nuclear Vector Replacement using Binary Integer Programming for NMR Structure-Based Assignments.

    PubMed

    Apaydin, Mehmet Serkan; Çatay, Bülent; Patrick, Nicholas; Donald, Bruce R

    2011-05-01

    Nuclear magnetic resonance (NMR) spectroscopy is an important experimental technique that allows one to study protein structure and dynamics in solution. An important bottleneck in NMR protein structure determination is the assignment of NMR peaks to the corresponding nuclei. Structure-based assignment (SBA) aims to solve this problem with the help of a template protein which is homologous to the target and has applications in the study of structure-activity relationship, protein-protein and protein-ligand interactions. We formulate SBA as a linear assignment problem with additional nuclear overhauser effect constraints, which can be solved within nuclear vector replacement's (NVR) framework (Langmead, C., Yan, A., Lilien, R., Wang, L. and Donald, B. (2003) A Polynomial-Time Nuclear Vector Replacement Algorithm for Automated NMR Resonance Assignments. Proc. the 7th Annual Int. Conf. Research in Computational Molecular Biology (RECOMB) , Berlin, Germany, April 10-13, pp. 176-187. ACM Press, New York, NY. J. Comp. Bio. , (2004), 11, pp. 277-298; Langmead, C. and Donald, B. (2004) An expectation/maximization nuclear vector replacement algorithm for automated NMR resonance assignments. J. Biomol. NMR , 29, 111-138). Our approach uses NVR's scoring function and data types and also gives the option of using CH and NH residual dipolar coupling (RDCs), instead of NH RDCs which NVR requires. We test our technique on NVR's data set as well as on four new proteins. Our results are comparable to NVR's assignment accuracy on NVR's test set, but higher on novel proteins. Our approach allows partial assignments. It is also complete and can return the optimum as well as near-optimum assignments. Furthermore, it allows us to analyze the information content of each data type and is easily extendable to accept new forms of input data, such as additional RDCs.

  16. Effect of shortening replacement with oleogels on the rheological and tomographic characteristics of aerated baked goods.

    PubMed

    Lim, Jeongtaek; Jeong, Sungmin; Lee, JaeHwan; Park, Sungkwon; Lee, Jonggil; Lee, Suyong

    2017-08-01

    A great deal of effort has been made to reduce the use of shortening owing to the high level of saturated fats as well as the presence of trans fats. Grape seed oil high in unsaturated fats was structured with candelilla wax to form solid-like oleogels that were utilized as a shortening replacer in aerated baked goods, specifically muffins. Muffin batters with greater amounts of oleogels exhibited lower viscosity, greater shear-thinning behavior and less elastic nature. The shortening replacement with oleogels significantly increased the specific gravity of the batters, consequently affecting the muffin volume after baking. X-ray tomography indicated a lower fragmentation index (i.e. a more connected solid structure) in the oleogel-incorporated muffins, which was correlated with more enclosed and isolated air cells. A stress relaxation test showed that the shortening replacement with oleogels produced muffins with a firmer and springier texture. Based on fatty acid compositions, the ratio of saturated to unsaturated fatty acids was significantly reduced from 2.81 to 0.41. Use of the oleogels as a shortening replacer at a ratio of 1:3 by weight was effective in producing muffins with comparable quality attributes to the control with shortening. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  17. Evaluating the solution from MrBUMP and BALBES

    PubMed Central

    Keegan, Ronan M.; Long, Fei; Fazio, Vincent J.; Winn, Martyn D.; Murshudov, Garib N.; Vagin, Alexei A.

    2011-01-01

    Molecular replacement is one of the key methods used to solve the problem of determining the phases of structure factors in protein structure solution from X-ray image diffraction data. Its success rate has been steadily improving with the development of improved software methods and the increasing number of structures available in the PDB for use as search models. Despite this, in cases where there is low sequence identity between the target-structure sequence and that of its set of possible homologues it can be a difficult and time-consuming chore to isolate and prepare the best search model for molecular replacement. MrBUMP and BALBES are two recent developments from CCP4 that have been designed to automate and speed up the process of determining and preparing the best search models and putting them through molecular replacement. Their intention is to provide the user with a broad set of results using many search models and to highlight the best of these for further processing. An overview of both programs is presented along with a description of how best to use them, citing case studies and the results of large-scale testing of the software. PMID:21460449

  18. Mobile remote manipulator vehicle system

    NASA Technical Reports Server (NTRS)

    Bush, Harold G. (Inventor); Mikulas, Martin M., Jr. (Inventor); Wallsom, Richard E. (Inventor); Jensen, J. Kermit (Inventor)

    1987-01-01

    A mobile remote manipulator system is disclosed for assembly, repair and logistics transport on, around and about a space station square bay truss structure. The vehicle is supported by a square track arrangement supported by guide pins integral with the space station truss structure and located at each truss node. Propulsion is provided by a central push-pull drive mechanism that extends out from the vehicle one full structural bay over the truss and locks drive rods into the guide pins. The draw bar is now retracted and the mobile remote manipulator system is pulled onto the next adjacent structural bay. Thus, translation of the vehicle is inchworm style. The drive bar can be locked onto two guide pins while the extendable draw bar is within the vehicle and then push the vehicle away one bay providing bidirectional push-pull drive. The track switches allow the vehicle to travel in two orthogonal directions over the truss structure which coupled with the bidirectional drive, allow movement in four directions on one plane. The top layer of this trilayered vehicle is a logistics platform. This platform is capable of 369 degees of rotation and will have two astronaut foot restraint platforms and a space crane integral.

  19. A 3D visualization system for molecular structures

    NASA Technical Reports Server (NTRS)

    Green, Terry J.

    1989-01-01

    The properties of molecules derive in part from their structures. Because of the importance of understanding molecular structures various methodologies, ranging from first principles to empirical technique, were developed for computing the structure of molecules. For large molecules such as polymer model compounds, the structural information is difficult to comprehend by examining tabulated data. Therefore, a molecular graphics display system, called MOLDS, was developed to help interpret the data. MOLDS is a menu-driven program developed to run on the LADC SNS computer systems. This program can read a data file generated by the modeling programs or data can be entered using the keyboard. MOLDS has the following capabilities: draws the 3-D representation of a molecule using stick, ball and ball, or space filled model from Cartesian coordinates, draws different perspective views of the molecule; rotates the molecule on the X, Y, Z axis or about some arbitrary line in space, zooms in on a small area of the molecule in order to obtain a better view of a specific region; and makes hard copy representation of molecules on a graphic printer. In addition, MOLDS can be easily updated and readily adapted to run on most computer systems.

  20. Uniaxial drawing and mechanical properties of poly[(R)-3-hydroxybutyrate]/poly(L-lactic acid) blends.

    PubMed

    Park, Jun Wuk; Doi, Yoshiharu; Iwata, Tadahisa

    2004-01-01

    Blends of poly(L-lactic acid) (PLLA) with two kinds of poly[(R)-3-hydroxybutyrate] (PHB) having different molecular weights, commercial-grade bacterial PHB (bacterial-PHB) and ultrahigh molecular weight PHB (UHMW-PHB), were prepared by the solvent-casting method and uniaxially drawn at two drawing temperatures, around PHB's T(g) (2 degrees C) for PHB-rich blends and around PLLA's T(g) (60 degrees C) for PLLA-rich blends. Differential scanning calorimetry analysis showed that this system was immiscible over the entire composition range. Mechanical properties of all of the samples were improved in proportion to the draw ratio. Although PLLA domains in bacterial-PHB-rich blends remained almost unstretched during cold drawing, a good interfacial adhesion between two polymers and the reinforcing role of PLLA components led to enhanced mechanical properties proportionally to the PLLA content at the same draw ratio. On the contrary, in the case of UHMW-PHB-rich blends, the minor component PLLA was found to be also oriented by cold drawing in ice water due to an increase in the interfacial entanglements caused by the very long chain length of the matrix polymer. As a result, their mechanical properties were considerably improved with increasing PLLA content compared with the bacterial-PHB system. Scanning electron microscopy observations on the surface and cross-section revealed that a layered structure with uniformly oriented microporous in the interior was obtained by selectively removal of PLLA component after simple alkaline treatment.

  1. A survey of cyclic replacements for the central diamide moiety of inhibitors of inosine monophosphate dehydrogenase.

    PubMed

    Dhar, T G Murali; Liu, Chunjian; Pitts, William J; Guo, Junquing; Watterson, Scott H; Gu, Henry; Fleener, Catherine A; Rouleau, Katherine; Sherbina, N Z; Barrish, Joel C; Hollenbaugh, Diane; Iwanowicz, Edwin J

    2002-11-04

    A series of heterocyclic replacements for the central diamide moiety of 1, a potent small molecule inhibitor of inosine monophosphate dehydrogenase (IMPDH) were explored The synthesis and the structure-activity relationships (SARs), derived from in vitro studies, for these new series of inhibitors is given.

  2. Re-refinement of the spliceosomal U4 snRNP core-domain structure

    PubMed Central

    Li, Jade; Leung, Adelaine K.; Kondo, Yasushi; Oubridge, Chris; Nagai, Kiyoshi

    2016-01-01

    The core domain of small nuclear ribonucleoprotein (snRNP), comprised of a ring of seven paralogous proteins bound around a single-stranded RNA sequence, functions as the assembly nucleus in the maturation of U1, U2, U4 and U5 spliceosomal snRNPs. The structure of the human U4 snRNP core domain was initially solved at 3.6 Å resolution by experimental phasing using data with tetartohedral twinning. Molecular replacement from this model followed by density modification using untwinned data recently led to a structure of the minimal U1 snRNP at 3.3 Å resolution. With the latter structure providing a search model for molecular replacement, the U4 core-domain structure has now been re-refined. The U4 Sm site-sequence AAUUUUU has been shown to bind to the seven Sm proteins SmF–SmE–SmG–SmD3–SmB–SmD1–SmD2 in an identical manner as the U1 Sm-site sequence AAUUUGU, except in SmD1 where the bound U replaces G. The progression from the initial to the re-refined structure exemplifies a tortuous route to accuracy: where well diffracting crystals of complex assemblies are initially unavailable, the early model errors are rectified by exploiting preliminary interpretations in further experiments involving homologous structures. New insights are obtained from the more accurate model. PMID:26894541

  3. ACTOMP - AUTOCAD TO MASS PROPERTIES

    NASA Technical Reports Server (NTRS)

    Jones, A.

    1994-01-01

    AutoCAD to Mass Properties was developed to facilitate quick mass properties calculations of structures having many simple elements in a complex configuration such as trusses or metal sheet containers. Calculating the mass properties of structures of this type can be a tedious and repetitive process, but ACTOMP helps automate the calculations. The structure can be modelled in AutoCAD or a compatible CAD system in a matter of minutes using the 3-Dimensional elements. This model provides all the geometric data necessary to make a mass properties calculation of the structure. ACTOMP reads the geometric data of a drawing from the Drawing Interchange File (DXF) used in AutoCAD. The geometric entities recognized by ACTOMP include POINTs, 3DLINEs, and 3DFACEs. ACTOMP requests mass, linear density, or area density of the elements for each layer, sums all the elements and calculates the total mass, center of mass (CM) and the mass moments of inertia (MOI). AutoCAD utilizes layers to define separate drawing planes. ACTOMP uses layers to differentiate between multiple types of similar elements. For example if a structure is made of various types of beams, modeled as 3DLINEs, each with a different linear density, the beams can be grouped by linear density and each group placed on a separate layer. The program will request the linear density of 3DLINEs for each new layer it finds as it processes the drawing information. The same is true with POINTs and 3DFACEs. By using layers this way a very complex model can be created. POINTs are used for point masses such as bolts, small machine parts, or small electronic boxes. 3DLINEs are used for beams, bars, rods, cables, and other similarly slender elements. 3DFACEs are used for planar elements. 3DFACEs may be created as 3 or 4 Point faces. Some examples of elements that might be modelled using 3DFACEs are plates, sheet metal, fabric, boxes, large diameter hollow cylinders and evenly distributed masses. ACTOMP was written in Microsoft QuickBasic (Version 2.0). It was developed for the IBM PC microcomputer and has been implemented on an IBM PC compatible under DOS 3.21. ACTOMP was developed in 1988 and requires approximately 5K bytes to operate.

  4. Anticipatory scene representation in preschool children's recall and recognition memory.

    PubMed

    Kreindel, Erica; Intraub, Helene

    2017-09-01

    Behavioral and neuroscience research on boundary extension (false memory beyond the edges of a view of a scene) has provided new insights into the constructive nature of scene representation, and motivates questions about development. Early research with children (as young as 6-7 years) was consistent with boundary extension, but relied on an analysis of spatial errors in drawings which are open to alternative explanations (e.g. drawing ability). Experiment 1 replicated and extended prior drawing results with 4-5-year-olds and adults. In Experiment 2, a new, forced-choice immediate recognition memory test was implemented with the same children. On each trial, a card (photograph of a simple scene) was immediately replaced by a test card (identical view and either a closer or more wide-angle view) and participants indicated which one matched the original view. Error patterns supported boundary extension; identical photographs were more frequently rejected when the closer view was the original view, than vice versa. This asymmetry was not attributable to a selection bias (guessing tasks; Experiments 3-5). In Experiment 4, working memory load was increased by presenting more expansive views of more complex scenes. Again, children exhibited boundary extension, but now adults did not, unless stimulus duration was reduced to 5 s (limiting time to implement strategies; Experiment 5). We propose that like adults, children interpret photographs as views of places in the world; they extrapolate the anticipated continuation of the scene beyond the view and misattribute it to having been seen. Developmental differences in source attribution decision processes provide an explanation for the age-related differences observed. © 2016 John Wiley & Sons Ltd.

  5. Students' Understandings of Human Organs and Organ Systems

    NASA Astrophysics Data System (ADS)

    Reiss, Michael J.; Tunnicliffe, Sue Dale

    2001-06-01

    How do people develop their understanding of what is inside them? This study looks at students' understandings of their internal structure. A cross-sectional approach was used involving a total of 158 students in England from six different age groups (ranging from four year old students to first year undergraduates). Students were given a blank piece of A4-sized paper and asked to draw what they thought was inside themselves. Repeated inspections of the completed drawings allowed us to construct a seven point scale of these representations. Our analysis shows the extent to which student understanding increases with age and the degree to which students know more about some organs and organ systems than others. While gender differences in the drawings were generally not large there were some intriguing differences in the ways males and females drew reproductive organs.

  6. 9 CFR 355.18 - Drawings and specifications to be furnished.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION... specifications for remodeling inspected plants or for new structures at such plants shall be submitted to the...

  7. 37 CFR 1.84 - Standards for drawings.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... vivo imaging, thin layer chromatography plates, crystalline structures, and, in a design patent... oblique strokes, the space between strokes being chosen on the basis of the total area to be hatched. The...

  8. 37 CFR 1.84 - Standards for drawings.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... vivo imaging, thin layer chromatography plates, crystalline structures, and, in a design patent... oblique strokes, the space between strokes being chosen on the basis of the total area to be hatched. The...

  9. 37 CFR 1.84 - Standards for drawings.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... vivo imaging, thin layer chromatography plates, crystalline structures, and, in a design patent... oblique strokes, the space between strokes being chosen on the basis of the total area to be hatched. The...

  10. Fracture mechanics methodology: Evaluation of structural components integrity

    NASA Astrophysics Data System (ADS)

    Sih, G. C.; de Oliveira Faria, L.

    1984-09-01

    The application of fracture mechanics to structural-design problems is discussed in lectures presented in the AGARD Fracture Mechanics Methodology course held in Lisbon, Portugal, in June 1981. The emphasis is on aeronautical design, and chapters are included on fatigue-life prediction for metals and composites, the fracture mechanics of engineering structural components, failure mechanics and damage evaluation of structural components, flaw-acceptance methods, and reliability in probabilistic design. Graphs, diagrams, drawings, and photographs are provided.

  11. Teaching clinically relevant dental anatomy in the dental curriculum: description and assessment of an innovative module.

    PubMed

    Obrez, Ales; Briggs, Charlotte; Buckman, James; Goldstein, Loren; Lamb, Courtney; Knight, William G

    2011-06-01

    The primary objective of the preclinical dental anatomy course in the predoctoral dental curriculum is to introduce students to cognitive and psychomotor skills related to the morphology and spatial and functional relationships of human dentition. Traditionally, didactic content for the subject is found in textbooks and course manuals and summarized by the faculty in lectures to the entire class. Psychomotor skills associated with recognition and reproduction of tooth morphology are traditionally learned by examining preserved tooth specimens and their cross-sections, combined with producing two-dimensional line drawings and carving teeth from wax blocks. These activities have little direct clinical application. In most cases, students are passive in the learning process, and assessment of student performance is unilateral and subjective. A recently revised dental anatomy module at the University of Illinois at Chicago College of Dentistry integrates independent class preparation with active small-group discussion and patient scenario-based wax-up exercises to replace missing tooth structure on manikin teeth. The goal of the revision is to shift emphasis away from decontextualized technical learning toward more active and clinically applicable learning that improves conceptual understanding while contributing to early acquisition of psychomotor skills. This article describes the rationale, components, and advantages of the revised module and presents a pre-post comparison of student learning outcomes for three class cohorts (N=203).

  12. Repair and Protection of Small Railway Viaduct with Jammed Span at the Mining Influence

    NASA Astrophysics Data System (ADS)

    Bętkowski, Piotr

    2017-10-01

    This paper is about the maintenance of bridge objects on mining areas. Based on several years of observation is shown as functional parameters and technical conditions were deteriorated. As a result of the mining area deformations appeared among others following damages: block of bearings, jam of span, cracks on the abutments. The article describes series of clever maintenance repairs (such as the restoration of displacement freedom on non-standard tangent bearings) which enabled the exploitation of the viaduct without interruptions of railway communication. The region of the bridge is planned to further mining activities, which prejudged, that a repair of the viaduct was necessary to realization. The article discusses the predicted mining area deformation and analyses their influence on the bridge structure. Repair of the viaduct is a comprehensive example of the mining facility protection with the restoration of the expansion joints, bearings replacement, widening benches under bearings, stitching cracks and strengthening abutments, recreating the isolation and the drainage system damaged by mining influences, performance strut in the foundation level. An important element in determining the durability of repair is the selection of appropriate materials and repair technology, which is analysed in the article. All of these tasks completed in less than four months. Article illustrates the photo documentation made before and after repairs and technical drawings that show the range of the repairs.

  13. Revolutionary Science

    PubMed Central

    Fang, Ferric C.

    2016-01-01

    ABSTRACT On rare occasions in the history of science, remarkable discoveries transform human society and forever alter mankind’s view of the world. Examples of such discoveries include the heliocentric theory, Newtonian physics, the germ theory of disease, quantum theory, plate tectonics and the discovery that DNA carries genetic information. The science philosopher Thomas Kuhn famously described science as long periods of normality punctuated by times of crisis, when anomalous observations culminate in revolutionary changes that replace one paradigm with another. This essay examines several transformative discoveries in the light of Kuhn’s formulation. We find that each scientific revolution is unique, with disparate origins that may include puzzle solving, serendipity, inspiration, or a convergence of disparate observations. The causes of revolutionary science are varied and lack an obvious common structure. Moreover, it can be difficult to draw a clear distinction between so-called normal and revolutionary science. Revolutionary discoveries often emerge from basic science and are critically dependent on nonrevolutionary research. Revolutionary discoveries may be conceptual or technological in nature, lead to the creation of new fields, and have a lasting impact on many fields in addition to the field from which they emerge. In contrast to political revolutions, scientific revolutions do not necessarily require the destruction of the previous order. For humanity to continue to benefit from revolutionary discoveries, a broad palette of scientific inquiry with a particular emphasis on basic science should be supported. PMID:26933052

  14. Like daughter, like son? Fertility decline and the transformation of gender systems in the family

    PubMed Central

    Allendorf, Keera

    2016-01-01

    BACKGROUND An important question for population research is whether fertility decline transforms gender systems. OBJECTIVE This paper contributes to answering this broad question by examining how fertility decline may change the relative value and roles of daughters and sons in families. First, I outline theoretical pathways, suggesting that a key factor is the gender composition of families. As fertility declines, the proportion of families with children of only one gender increases, which may facilitate greater gender symmetry between daughters and sons. Second, I explore how fertility decline may have contributed to the transformation of the relative value and roles of sons and daughters in practice in one place. METHODS The analysis draws primarily on semi-structured interviews with 30 respondents living in one Indian village. This village is located in a district where fertility has declined to at least the replacement level. RESULTS Respondents perceive changes in the gender system, including less son preference, more equal schooling for sons and daughters, more freedom in marriage and premarital relationships, and perhaps greater daughter support of parents in old age. CONCLUSIONS The results describe changes in the relative value, treatment, and behavior of sons and daughters that are consistent with the theorized effects of fertility decline. Future research is needed, however, to determine whether fertility decline makes a causal contribution to changes in the gender system. PMID:27147902

  15. Revolutionary Science.

    PubMed

    Casadevall, Arturo; Fang, Ferric C

    2016-03-01

    On rare occasions in the history of science, remarkable discoveries transform human society and forever alter mankind's view of the world. Examples of such discoveries include the heliocentric theory, Newtonian physics, the germ theory of disease, quantum theory, plate tectonics and the discovery that DNA carries genetic information. The science philosopher Thomas Kuhn famously described science as long periods of normality punctuated by times of crisis, when anomalous observations culminate in revolutionary changes that replace one paradigm with another. This essay examines several transformative discoveries in the light of Kuhn's formulation. We find that each scientific revolution is unique, with disparate origins that may include puzzle solving, serendipity, inspiration, or a convergence of disparate observations. The causes of revolutionary science are varied and lack an obvious common structure. Moreover, it can be difficult to draw a clear distinction between so-called normal and revolutionary science. Revolutionary discoveries often emerge from basic science and are critically dependent on nonrevolutionary research. Revolutionary discoveries may be conceptual or technological in nature, lead to the creation of new fields, and have a lasting impact on many fields in addition to the field from which they emerge. In contrast to political revolutions, scientific revolutions do not necessarily require the destruction of the previous order. For humanity to continue to benefit from revolutionary discoveries, a broad palette of scientific inquiry with a particular emphasis on basic science should be supported. Copyright © 2016 Casadevall and Fang.

  16. Re-energizing energy supply: Electrolytically-produced hydrogen as a flexible energy storage medium and fuel for road transport

    NASA Astrophysics Data System (ADS)

    Emonts, Bernd; Schiebahn, Sebastian; Görner, Klaus; Lindenberger, Dietmar; Markewitz, Peter; Merten, Frank; Stolten, Detlef

    2017-02-01

    "Energiewende", which roughly translates as the transformation of the German energy sector in accordance with the imperatives of climate change, may soon become a byword for the corresponding processes most other developed countries are at various stages of undergoing. Germany's notable progress in this area offers valuable insights that other states can draw on in implementing their own transitions. The German state of North Rhine-Westphalia (NRW) is making its own contribution to achieving the Energiewende's ambitious objectives: in addition to funding an array of 'clean and green' projects, the Virtual Institute Power to Gas and Heat was established as a consortium of seven scientific and technical organizations whose aim is to inscribe a future, renewable-based German energy system with adequate flexibility. Thus, it is tasked with conceiving of and evaluating suitable energy path options. This paper outlines one of the most promising of these pathways, which is predicated on the use of electrolytically-produced hydrogen as an energy storage medium, as well as the replacement of hydrocarbon-based fuel for most road vehicles. We describe and evaluate this path and place it in a systemic context, outlining a case study from which other countries and federated jurisdictions therein may draw inspiration.

  17. Spline screw payload fastening system

    NASA Technical Reports Server (NTRS)

    Vranish, John M. (Inventor)

    1993-01-01

    A system for coupling an orbital replacement unit (ORU) to a space station structure via the actions of a robot and/or astronaut is described. This system provides mechanical and electrical connections both between the ORU and the space station structure and between the ORU and the ORU and the robot/astronaut hand tool. Alignment and timing features ensure safe, sure handling and precision coupling. This includes a first female type spline connector selectively located on the space station structure, a male type spline connector positioned on the orbital replacement unit so as to mate with and connect to the first female type spline connector, and a second female type spline connector located on the orbital replacement unit. A compliant drive rod interconnects the second female type spline connector and the male type spline connector. A robotic special end effector is used for mating with and driving the second female type spline connector. Also included are alignment tabs exteriorally located on the orbital replacement unit for berthing with the space station structure. The first and second female type spline connectors each include a threaded bolt member having a captured nut member located thereon which can translate up and down the bolt but are constrained from rotation thereabout, the nut member having a mounting surface with at least one first type electrical connector located on the mounting surface for translating with the nut member. At least one complementary second type electrical connector on the orbital replacement unit mates with at least one first type electrical connector on the mounting surface of the nut member. When the driver on the robotic end effector mates with the second female type spline connector and rotates, the male type spline connector and the first female type spline connector lock together, the driver and the second female type spline connector lock together, and the nut members translate up the threaded bolt members carrying the first type electrical connector up to the complementary second type connector for interconnection therewith.

  18. The GlycanBuilder: a fast, intuitive and flexible software tool for building and displaying glycan structures.

    PubMed

    Ceroni, Alessio; Dell, Anne; Haslam, Stuart M

    2007-08-07

    Carbohydrates play a critical role in human diseases and their potential utility as biomarkers for pathological conditions is a major driver for characterization of the glycome. However, the additional complexity of glycans compared to proteins and nucleic acids has slowed the advancement of glycomics in comparison to genomics and proteomics. The branched nature of carbohydrates, the great diversity of their constituents and the numerous alternative symbolic notations, make the input and display of glycans not as straightforward as for example the amino-acid sequence of a protein. Every glycoinformatic tool providing a user interface would benefit from a fast, intuitive, appealing mechanism for input and output of glycan structures in a computer readable format. A software tool for building and displaying glycan structures using a chosen symbolic notation is described here. The "GlycanBuilder" uses an automatic rendering algorithm to draw the saccharide symbols and to place them on the drawing board. The information about the symbolic notation is derived from a configurable graphical model as a set of rules governing the aspect and placement of residues and linkages. The algorithm is able to represent a structure using only few traversals of the tree and is inherently fast. The tool uses an XML format for import and export of encoded structures. The rendering algorithm described here is able to produce high-quality representations of glycan structures in a chosen symbolic notation. The automated rendering process enables the "GlycanBuilder" to be used both as a user-independent component for displaying glycans and as an easy-to-use drawing tool. The "GlycanBuilder" can be integrated in web pages as a Java applet for the visual editing of glycans. The same component is available as a web service to render an encoded structure into a graphical format. Finally, the "GlycanBuilder" can be integrated into other applications to create intuitive and appealing user interfaces: an example is the "GlycoWorkbench", a software tool for assisted annotation of glycan mass spectra. The "GlycanBuilder" represent a flexible, reliable and efficient solution to the problem of input and output of glycan structures in any glycomic tool or database.

  19. 24 CFR 891.745 - Replacement reserve.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... section, total structures include main buildings, accessory buildings, garages, and other buildings. The... cost of the total structures (for new construction projects), 0.4 percent of the cost of the initial...

  20. 24 CFR 891.745 - Replacement reserve.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... section, total structures include main buildings, accessory buildings, garages, and other buildings. The... cost of the total structures (for new construction projects), 0.4 percent of the cost of the initial...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top